Effect of denture cleaning on abrasion resistance and surface topography of polymerized CAD CAM acrylic resin denture base

PubMed Central

Shinawi, Lana Ahmed

2017-01-01

Background The application of computer-aided design computer-aided manufacturing (CAD CAM) technology in the fabrication of complete dentures, offers numerous advantages as it provides optimum fit and eliminates polymerization shrinkage of the acrylic base. Additionally, the porosity and surface roughness of CAD CAM resins is less compared to conventionally processed resins which leads to a decrease in the adhesion of bacteria on the denture base, which is associated with many conditions including halitosis and aspiration pneumonia in elderly denture wearers. Aim To evaluate the influence of tooth brushing with dentifrices on CAD CAM resin blocks in terms of abrasion resistance, surface roughness and scanning electron photomicrography. Methods This experimental study was carried out at the Faculty of Dentistry of King Abdulaziz University during 2016. A total of 40 rectangular shaped polymerized CAD CAM resin samples were subjected to 40.000 and 60.000 brushing strokes under a 200-gram vertical load simulating three years of tooth brushing strokes using commercially available denture cleaning dentifrice. Data were analyzed by SPSS version 20, using descriptive statistics and ANOVA. Results ANOVA test revealed a statistical significant weight loss of CAD CAM acrylic resin denture base specimens following 40.000 and 60.000 brushing strokes as well as a statistical significant change (p=0.0.5) in the surface roughness following brushing. The CAD CAM resin samples SEM baseline imaging revealed a relatively smooth homogenous surface, but following 40,000 and 60,000 brushing strokes, imaging displayed the presence of small scratches on the surface. Conclusion CAD CAM resin displayed a homogenous surface initially with low surface roughness that was significantly affected following simulating three years of manual brushing, but despite the significant weight loss, the findings are within the clinically acceptable limits. PMID:28713496

Effect of denture cleaning on abrasion resistance and surface topography of polymerized CAD CAM acrylic resin denture base.

PubMed

Shinawi, Lana Ahmed

2017-05-01

The application of computer-aided design computer-aided manufacturing (CAD CAM) technology in the fabrication of complete dentures, offers numerous advantages as it provides optimum fit and eliminates polymerization shrinkage of the acrylic base. Additionally, the porosity and surface roughness of CAD CAM resins is less compared to conventionally processed resins which leads to a decrease in the adhesion of bacteria on the denture base, which is associated with many conditions including halitosis and aspiration pneumonia in elderly denture wearers. To evaluate the influence of tooth brushing with dentifrices on CAD CAM resin blocks in terms of abrasion resistance, surface roughness and scanning electron photomicrography. This experimental study was carried out at the Faculty of Dentistry of King Abdulaziz University during 2016. A total of 40 rectangular shaped polymerized CAD CAM resin samples were subjected to 40.000 and 60.000 brushing strokes under a 200-gram vertical load simulating three years of tooth brushing strokes using commercially available denture cleaning dentifrice. Data were analyzed by SPSS version 20, using descriptive statistics and ANOVA. ANOVA test revealed a statistical significant weight loss of CAD CAM acrylic resin denture base specimens following 40.000 and 60.000 brushing strokes as well as a statistical significant change (p=0.0.5) in the surface roughness following brushing. The CAD CAM resin samples SEM baseline imaging revealed a relatively smooth homogenous surface, but following 40,000 and 60,000 brushing strokes, imaging displayed the presence of small scratches on the surface. CAD CAM resin displayed a homogenous surface initially with low surface roughness that was significantly affected following simulating three years of manual brushing, but despite the significant weight loss, the findings are within the clinically acceptable limits.

Charcoal and charcoal-based dentifrices: A literature review.

PubMed

Brooks, John K; Bashirelahi, Nasir; Reynolds, Mark A

2017-09-01

Sales of charcoal dentifrices and powders have rapidly emerged into the Internet marketplace. The authors conducted a literature review to examine the efficacy and safety of charcoal and charcoal-based dentifrices. The authors searched the MEDLINE and Scopus databases for clinical studies on the use of charcoal and charcoal-based dentifrices and laboratory investigations on the bioactivity or toxicity of charcoal and charcoal-based dentifrices, published through February 2017. The authors used a defined search strategy to identify randomized, controlled clinical trials with a follow-up duration of 3 months or longer. In addition, the authors selected the first 50 consecutive charcoal dentifrices from Google.com and Amazon.com for ascertainment of product assortment and advertising promotions. The authors' literature search identified 118 potentially eligible articles. Thirteen studies reported brushing the teeth with raw charcoal or soot; however, none of these studies met the inclusion criteria. Two studies offered nonspecific caries reductions, 3 studies reported deleterious outcomes (increased caries, enamel abrasion, nonquantified negative impact), and 1 study indicated only that brushing with raw charcoal had no adverse effects on oral hygiene. Seven other studies reported only on the use of charcoal for oral hygiene. Internet advertisements included unsubstantiated therapeutic claims-such as antibacterial, antifungal, antiviral, and oral detoxification, as well as potentially misleading product assertions. One-third of the charcoal dentifrices contained bentonite clay, and 1 contained betel leaves. The results of this literature review showed insufficient clinical and laboratory data to substantiate the safety and efficacy claims of charcoal and charcoal-based dentifrices. Larger-scale and well-designed studies are needed to establish conclusive evidence. Dental clinicians should advise their patients to be cautious when using charcoal and charcoal-based dentifrices with unproven claims of efficacy and safety. Copyright © 2017 American Dental Association. Published by Elsevier Inc. All rights reserved.

Abrasion resistance of direct and indirect resins as a function of a sealant veneer.

PubMed

Ferraz Caneppele, Taciana Marco; Rocha, Daniel Maranha; Màximo Araujo, Maria Amelia; Valera, Màrcia Carneiro; Salazar Marocho, Susana MarIa

2014-01-01

Abrasive wear is one of the most common type of wear that not only affect teeth, as also dental restorations. Thus to investigate one of the etiological factors as tooth brushing procedure is clinical relevant in order to select the best material combination that may prevent damage of resin dental restoration's abrasion. This study evaluated the influence of tooth brushing on mass loss and surface roughness of direct Venus (Vs) and indirect Signum (Sg) resin composites, with and without a surface sealant, Fortify (F). Twenty-four specimens were prepared with each resin composite, using their proprietary curing units, according to manufacturer's instructions. All the specimens were polished and ultrasonically cleaned in distilled water for 5 minutes. Half of the specimens of each resin (n = 12) were covered with F (Vs F and Sg F ), except for the control (C) specimens (Vs C and Sg C ), which were not sealed. Mass loss (ML) as well as surface roughness (Ra ) was measured for all the specimens. Then, the specimens were subjected to toothbrush-dentifrice abrasion, using a testing machine for 67.000 brushing strokes, in an abrasive slurry. After brushing simulation, the specimens were removed from the holder, rinsed thoroughly and blot dried with soft absorbent paper. The abrasion of the material was quantitatively determined with final measurements of ML and surface roughness, using the method described above. ML data were analyzed by two-way analysis of variance (ANOVA) and the analysis indicated that resin composites were not statistically different; however, the specimens sealed with F showed higher ML. Ra mean values of the groups Vs F and Sg F significantly increased. Tooth brushing affects mainly the roughness of the direct and indirect resin composites veneered with a sealant.

Effect of Whitening Toothpastes on Dentin Abrasion: An In Vitro Study.

PubMed

Vieira, Gustavo Henrique Apolinario; Nogueira, Marcia Bessa; Gaio, Eduardo Jose; Rosing, Cassiano Kuchenbecker; Santiago, Sergio Lima; Rego, Rodrigo Otavio

To compare the effect of toothbrushing abrasion with hydrated silica-based whitening and regular toothpastes on root dentin using contact profilometry. Ninety dentin specimens (4 x 4 x 2 mm) were randomly divided into five experimental groups (n = 18) according to the toothpaste: three whitening (W1, W2 and W3) and two regular toothpastes (R1 and R2) produced by two different manufacturers. Using a brushing machine, each specimen was brushed with a constant load of 300 g for 2500 cycles (4.5 cycles/s). The toothpastes were diluted at a ratio of 1:3 w/w (dentifrice:distilled water). The brush diamond tip of the profilometer moved at a constant speed of 0.05 mm/s with a force of 0.7 mN. The average value of brushing abrasion in μm (mean ± SD) was obtained from five consecutive measurements of each specimen: W1 = 8.86 ± 1.58, W2 = 7.59 ± 1.04, W3 = 8.27 ± 2.39, R1 = 2.89 ± 1.05 and R2= 2.94 ± 1.29. There was a significant difference between groups (ANOVA, p<0.0001). Post-hoc Tukey's test for multiple comparisons showed differences between all the whitening and regular toothpastes, but not among the whitening nor among the regular toothpastes. The whitening toothpastes tested can cause more dentin abrasion than the regular ones.

Toothbrushing abrasion susceptibility of enamel and dentin bleached with calcium-supplemented hydrogen peroxide gel.

PubMed

Borges, A B; Santos, L F T F; Augusto, M G; Bonfiette, D; Hara, A T; Torres, C R G

2016-06-01

The objective of this study was to evaluate enamel and dentin susceptibility to toothbrushing abrasion, after bleaching with 7.5% hydrogen peroxide (HP) gel supplemented or not with 0.5% calcium gluconate (Ca). Toothbrushing was performed immediately and 1h after bleaching, with two suspensions (high and low abrasivity). Bovine enamel and dentin specimens were divided into 12 groups (n=10) according to the bleaching gel (with and without Ca), slurry abrasivity (high or low) and elapsed time after bleaching (immediately and after 1h). As control, a group was not bleached, but abraded. The treatment cycle (7 d) consisted of bleaching (1h) and toothbrushing (135 strokes/day) immediatelly or after 1h of artificial saliva exposure. Surface roughness and surface loss (μm) were measured by profilometry and analysed by three-way ANOVA (5%). Surface roughness means were significantly influenced by slurry abrasivity (p<0.0001). For enamel loss, significant triple interaction was observed (p<0.0001). HP-bleached groups and immediately brushed with high-abrasive slurry exhibited increased loss (1.41±0.14) compared to other groups (μm). Control and HP+Ca-bleached groups brushed after 1h with low abrasive slurry presented the lowest loss (0.21±0.03/0.27±0.02). For dentin loss, significant interaction was observed for bleaching and interval factors (p<0.001). 7.5%HP-bleached groups and immediately brushed showed significantly higher loss (8.71±2.45) than the other groups. It was concluded that surface roughness increased when high abrasive was used, independently of bleaching. 7.5%HP increased enamel and dentin loss, mainly with high abrasive slurries. Calcium supplementation of bleaching gel reduced surface loss. Additionally, in order to minimize tooth wear susceptibility, it is recommended to delay brushing after bleaching. After bleaching gel application, postponing toothbrushing is recommended, as well as brushing with low abrasive dentifrices. Additionally, supplementation of hydrogen peroxide gel with calcium-based remineralizing agent potentially reduces tooth loss after abrasion. Copyright © 2016 Elsevier Ltd. All rights reserved.

A four-week clinical study to evaluate and compare the effectiveness of a baking soda dentifrice and an antimicrobial dentifrice in reducing plaque.

PubMed

Ghassemi, Annahita; Vorwerk, Linda M; Hooper, William J; Putt, Mark S; Milleman, Kimberly R

2008-01-01

To evaluate and compare the effectiveness in reducing plaque of a fluoride dentifrice containing baking soda and a non-baking soda fluoride dentifrice containing an antimicrobial (triclosan/copolymer) system after a single brushing and over a four-week period of daily brushing. A total of 207 subjects completed this randomized, blinded, parallel-group clinical study. Twenty-four hour plaque buildup was scored at baseline and after two and four weeks of twice-daily use of the products. Additionally, controlled single brushing with the assigned dentifrice, followed by post-brushing plaque assessment, was performed at the start (baseline visit) and end (Week-4 visit) of the study. Plaque was scored using the Turesky, et al. modification of Quigley-Hein Index at six sites per tooth, according to Soparkar's modification. Mean baseline whole mouth plaque scores for the baking soda and triclosan dentifrice groups were 2.90 +/- 0.40 and 2.90 +/- 0.39, respectively, and the difference was not statistically significant. Within-group analysis showed that both products significantly reduced the amount of plaque over the four-week period (p < 0.001). Between-group analysis showed that brushing with the baking soda dentifrice exhibited significantly greater reduction in plaque scores (p < 0.001) after two and four weeks of brushing as compared to the triclosan dentifrice. After four weeks, the mean plaque reduction for the baking soda dentifrice group (0.34 +/- 0.32) was 2.22-fold greater than that observed for the triclosan dentifrice group (0.15 +/- 0.24). Similarly, single brushing with the baking soda dentifrice showed a 1.88- to 2.08-fold greater pre- to post-brushing plaque difference as compared to the triclosan dentifrice at the baseline visit (mean plaque reduction: baking soda 0.54 +/- 0.26; triclosan 0.28 +/- 0.18; ratio 1.88X) and Week-4 visit (baking soda 0.47 +/- 0.21; triclosan 0.23 +/- 0.15; ratio 2.08X). Similar to the whole mouth scores, evaluation of various tooth sites (facial, lingual, proximal, and gingival) showed a significantly greater reduction in plaque scores for brushing with the baking soda dentifrice as compared to brushing with the triclosan dentifrice. The results of this study indicate that the baking soda dentifrice was more effective than the non-baking soda, antimicrobial dentifrice in plaque removal after a single tooth brushing, and in maintaining significantly lower plaque levels during a four-week period of twice daily, unsupervised tooth brushing.

The effect of dentifrice quantity and toothbrushing behaviour on oral delivery and retention of fluoride in vivo.

PubMed

Creeth, Jonathan; Zero, Domenick; Mau, Melissa; Bosma, Mary Lynn; Butler, Andrew

2013-12-01

While toothpaste F(-) concentration and rinsing regimen have well-characterised impacts on fluoride's effectiveness, other aspects of brushing regimen have much less well-established effects, in particular, dentifrice quantity and brushing duration. An in vivo study (n = 42) of oral fluoride delivery (i.e. oral disposition post-brushing), and retention (i.e. concentration of F(-) in saliva post-brushing, a known efficacy predictor), was performed to compare effects observed with those of dentifrice F(-) concentration and rinsing regimen. Subjects brushed with a NaF-silica dentifrice (Aquafresh Advanced, 1,150 ppm F(-) ) or a control dentifrice (250 ppm F(-) , same base), for 45, 60, 120 or 180 seconds with 0.5 or 1.5 g dentifrice, and rinsed with 15 ml water once or three times in a cross-over design. The F(-) concentration was measured in post-brushing expectorate, rinse and toothbrush washing samples, and in saliva between 5-120 minutes after brushing. Using 1.5 g versus 0.5 g dentifrice increased F(-) in all samples: oral retention of F(-) was almost doubled by this increase. Increasing duration of brushing had more complex effects. The amount of F(-) in the expectorate increased but decreased in both rinse and toothbrush washing samples. Oral F(-) retention increased, but only in the period 30-120 minutes after brushing. Over the ranges investigated, the order of importance on oral F(-) retention was: dentifrice F(-) concentration > quantity > rinsing regimen > brushing duration. Hence, increasing dentifrice quantity and, to a lesser extent, the duration of brushing, can elevate oral fluoride post-brushing. Evidence is accumulating that the importance of these variables to fluoride efficacy may have been underestimated. © 2013 FDI World Dental Federation.

Enhancement of plaque removal efficacy by tooth brushing with baking soda dentifrices: results of five clinical studies.

PubMed

Putt, Mark S; Milleman, Kimberly R; Ghassemi, Annahita; Vorwerk, Linda M; Hooper, William J; Soparkar, Pramod M; Winston, Anthony E; Proskin, Howard M

2008-01-01

An earlier clinical study demonstrated that brushing with a commercial Arm & Hammer dentifrice containing baking soda physically removed significantly more plaque than brushing with either of two commercial dentifrices which did not contain baking soda. However, little has been done to confirm these results and to compare baking soda-containing dentifrices with more recently commercialized non-baking soda dentifrice formulations. The objective of this study was to compare commercial dentifrices containing 20% to 65% baking soda and commercial dentifrices without baking soda in enhancing plaque removal efficacy of tooth brushing. Five randomized, controlled, blinded, crossover clinical studies were performed among healthy adult volunteers who provided informed consent. After approximately 24 hours without oral hygiene, subjects with sufficient plaque were enrolled in the study phase. Plaque was scored before and after supervised brushing for one minute using the Turesky, et al. modification of the Quigley-Hein Plaque Index at six sites per tooth according to Soparkar's modification as described by Lobene, et al. In each study, wash-out periods with a regular dentifrice not evaluated in the study separated each product treatment. In all studies, every dentifrice exhibited a significant (p < 0.0001) reduction in 24-hour plaque scores. Between-group comparisons of whole mouth plaque scores in all five studies demonstrated that brushing with baking soda dentifrices resulted in statistically greater (p < 0.01) reductions in whole mouth mean plaque scores than brushing with dentifrices that did not contain baking soda. Results on other tooth surfaces, such as facial, lingual, proximal, and gingival surfaces also demonstrated statistically greater (p < 0.05) reductions in mean plaque scores for the baking soda-containing dentifrices as compared to the baking soda-free dentifrices. In three of the studies comparing different levels of baking soda, brushing with dentifrices with higher concentrations of baking soda consistently removed numerically more plaque than those containing lower levels. In one of these three studies, the difference in plaque removal between the baking soda dentifrices reached statistical significance. The results suggest a positive relationship between plaque removal efficiency and baking soda concentration. The collective results from the five controlled clinical studies on over 270 subjects reported in this paper, consistently demonstrate that Arm & Hammer baking soda dentifrices enhanced plaque removal effectiveness of tooth brushing to a significantly greater extent than the non-baking soda dentifrice products.

Effect of toothbrushing duration and dentifrice quantity on enamel remineralisation: An in situ randomized clinical trial.

PubMed

Creeth, J E; Kelly, S A; González-Cabezas, C; Karwal, R; Martinez-Mier, E A; Lynch, R J M; Bosma, M L; Zero, D T

2016-12-01

The influence of toothbrushing duration and dentifrice quantity on fluoride efficacy against dental caries is poorly understood. This study investigated effects of these two oral hygiene factors on enamel remineralisation (measured as surface microhardness recovery [SMHR]), enamel fluoride uptake (EFU), and net acid resistance (NAR) post-remineralisation in a randomized clinical study using an in situ caries model. Subjects (n=63) wore their partial dentures holding partially demineralised human enamel specimens and brushed twice-daily for two weeks, following each of five regimens: brushing for 120 or 45s with 1.5g of 1150ppm F (as NaF) dentifrice; for 120 or 45s with 0.5g of this dentifrice; and for 120s with 1.5g of 250ppm F (NaF) dentifrice. Comparing brushing for 120s against brushing for 45s, SMHR and EFU increased by 20.0% and 26.9% respectively when 1.5g dentifrice was used; and by 22.8% and 19.9% respectively when 0.5g dentifrice was used. Comparing brushing with 1.5g against brushing with 0.5g dentifrice, SMHR and EFU increased by 35.3% and 51.3% respectively when brushing for 120s, and by 38.4% and 43.0% respectively when brushing for 45s. Increasing brushing duration and dentifrice quantity also increased the NAR value. The effects of these two oral hygiene factors on SMHR, EFU, and NAR were statistically significant (p<0.05 in all cases). Brushing duration and dentifrice quantity have the potential to influence the anti-caries effectiveness of fluoride dentifrices. Study NCT01563172 on ClinicalTrials.gov. The effect of two key oral hygiene regimen factors - toothbrushing duration and dentifrice quantity - on fluoride's anticaries effectiveness is unclear. This 2-week home-use in situ remineralisation clinical study showed both these factors can influence fluoride bioactivity, and so can potentially affect fluoride's ability to protect against caries. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Clinical comparison of plaque inhibition effects of a novel stabilized stannous fluoride dentifrice and a chlorhexidine digluconate dentifrice using digital plaque imaging.

PubMed

Bellamy, P G; Boulding, A; Farmer, S; Day, T N; Mussett, A J; Barker, M L

2011-01-01

To compare the plaque inhibition efficacy of a novel 0.454% stannous fluoride (SnF2) test dentifrice with sodium hexametaphosphate and stannous chloride to a chlorhexidine digluconate (0.05%), aluminium lactate (0.8%), and aluminium fluoride marketed control dentifrice (Lacalut Aktiv or AlF3/Chx). This was a randomized, two-treatment, two-period, double-blind crossover study that compared the SnF2 test dentifrice to the AlF3/Chx control dentifrice. Each of the two treatment periods lasted for 17 consecutive days of product use, during which subjects were required to brush twice per day with their assigned dentifrice using a standard manual toothbrush (Oral-B P35 Indicator). The two periods of the crossover were separated by a four-day washout period. Plaque levels on the facial anterior tooth surfaces were evaluated and averaged among three assessment days at the end of each treatment period using digital plaque imaging analysis (DPIA). The evening prior to assessments, subjects only brushed lingual surfaces. Assessment time points were carried out in the morning following no morning brushing (A.M. pre-brush), following 40 seconds of brushing with the assigned dentifrice (A.M. post-brush), and in the afternoon (P.M.). The DPIA captured images were used to calculate and analyze visible plaque coverage. Twenty-eight subjects were randomized and completed the study. At each assessment time point, the SnF2 test dentifrice demonstrated a statistically significant lower plaque level compared to the AlF3/Chx dentifrice: A.M. mean pre-brush 15.9% lower, p < 0.05; A.M. mean post-brush 22.2% lower, p < 0.05; P.M. mean 24.3% lower, p < 0.005. Compared to the AlF3/Chx control dentifrice, the novel SnF2 test dentifrice significantly inhibited plaque regrowth overnight and during the day. Immediately after brushing there was also significantly less plaque coverage with the SnF2 test dentifrice.

In vitro study on tooth enamel lesions related to whitening dentifrice.

PubMed

de Araújo, Danilo Barral; Silva, Luciana Rodrigues; Campos, Elisângela de Jesus; Correia de Araújo, Roberto Paulo

2011-01-01

The tooth whitening substances for extrinsic use that are available in Brazil contain hydrogen peroxide or carbamide peroxide. Several studies have attributed the appearance of lesions in the enamel morphology, including hypersensitivity, to these substances. Such lesions justify fluoride therapy and application of infrared lasers, among other procedures. However, there is no consensus among researchers regarding the relevance of the severity of lesions detected on the tooth surface. The present study was carried out with an aim of evaluating in vitro the effects of the hydrogen peroxide, carbamide peroxide and sodium bicarbonate contained in dentifrice formulations, on human tooth enamel. After darkening process in laboratory, human premolars were brushed using dentifrice containing the two whitening substances (Rembrandt - carbamide peroxide and Mentadent - hydrogen peroxide) and the abrasive product (Colgate - sodium bicarbonate). The degree of specimen staining before and after this procedure was determined using spectrophotometry. Scanning electron microscopy (SEM) was used to obtain images, which were analyzed to show the nature of the lesions that appeared on the enamel surface. The effectiveness of the whitening caused by hydrogen peroxide and carbamide peroxide and the abrasion caused by bicarbonate were confirmed, given that the treated test pieces returned to their original coloration. Based on SEM, evaluation of the enamel surfaces subjected to the test products showed that different types of morphologic lesions of varying severity appeared. Whitening dentifrice containing hydrogen peroxide and carbamide peroxide produced lesions on the enamel surface such that the greatest sequelae were associated with exposure to hydrogen peroxide.

Effects of toothbrush hardness on in vitro wear and roughness of composite resins.

PubMed

Kyoizumi, Hideaki; Yamada, Junji; Suzuki, Toshimitsu; Kanehira, Masafumi; Finger, Werner J; Sasaki, Keiichi

2013-11-01

To investigate and compare the effects of toothbrushes with different hardness on abrasion and surface roughness of composite resins. Toothbrushes (DENT. EX Slimhead II 33, Lion Dental Products Co. Ltd., Tokyo, Japan) marked as soft, medium and hard, were used to brush 10 beam-shaped specimens of each of three composites resins (Venus [VEN], Venus Diamond [VED] and Venus Pearl [VEP]; HeraeusKulzer) with standardized calcium carbonate slurry in a multistation testing machine (2N load, 60 Hz). After each of five cycles with 10k brushing strokes the wear depth and surface roughness of the specimens were determined. After completion of 50k strokes representative samples were inspected by SEM. Data were treated with ANOVA and regression analyses (p < 0.05). Abrasion of the composite resins increased linearly with increasing number of brushing cycles (r² > 0.9). Highest wear was recorded for VEN, lowest for VED. Hard brushes produced significantly higher wear on VEN and VEP, whereas no difference in wear by toothbrush type was detected for VED. Significantly highest surface roughness was found on VED specimens (Ra > 1.5 µm), the lowest one on VEN (Ra < 0.3 µm). VEN specimens showed increased numbers of pinhole defects when brushed with hard toothbrushes, surfaces of VEP were uniformly abraded without level differences between the prepolymerized fillers and the glass filler-loaded matrix, VED showed large glass fillers protruding over the main filler-loaded matrix portion under each condition. Abrasion and surface roughness of composite resins produced by toothbrushing with dentifrice depend mainly on the type of restorative resin. Hardness grades of toothbrushes have minor effects only on abrasion and surface roughness of composite resins. No relationship was found between abrasion and surface roughness. The grade of the toothbrush used has minor effect on wear, texture and roughness of the composite resin.

Impact of toothbrushing with a dentifrice containing calcium peroxide on enamel color and roughness.

PubMed

Feitosa, Diala Aretha de Sousa; Borges, Boniek Castillo Dutra; Pinheiro, Fabio Henrique de Sa Leitao; Duarte, Rosangela Marques; Araujo, Renato Evangelista de; Braz, Rodivan; Santos, Maria Carmo Moreira da Silva; Montes, Marcos Antonio Japiassu Resende

2015-01-01

This in vitro study sought to evaluate both the bleaching potential and changes to average surface roughness (Ra) of enamel after brushing with a dentifrice. Fifty-four enamel specimens (4 x 4 x 2 mm) were divided into 3 groups (n = 18) and treated with 1 of 3 dentifrices: 1 with calcium peroxide, and 2 without. The samples were submitted to 20,000 brushing cycles. Color and Ra were measured before and after brushing. Although the Ra increased in all groups after brushing, only the dentifrice containing calcium peroxide resulted in an increase in reflectance.

Stain removal and whitening by baking soda dentifrice: A review of literature.

PubMed

Li, Yiming

2017-11-01

Tooth discoloration may be caused by intrinsic or extrinsic stains or a combination of both. There are 2 major approaches to removing the stains, including the chemical mechanism using peroxides for tooth bleaching and the mechanical mechanism using abrasives in prophylactic pastes and dentifrices to remove stains, resulting in a whitening effect. Attempts have also been made to add a low concentration of peroxides to dentifrices to enhance their abrasive cleaning to remove tooth stains. This article provides a review of both in vitro and clinical studies on stain removal and whitening effect of dentifrices containing sodium bicarbonate (baking soda). In recent years, whitening dentifrices have become popular because of little additional effort for use, ease of availability, low cost, and accumulated evidence of clinical efficacy and safety in the literature. Advances in research and technology have led to innovative formulations of dentifrices using baking soda as the sole abrasive or a component of an abrasive system. Baking soda is biologically compatible with acid-buffering capacities, antibacterial at high concentrations, and has a relatively lower abrasivity. The evidence available in the literature indicates that baking soda-based dentifrices are effective and safe for tooth stain removal and consequently whitening. A number of clinical studies have also shown that baking soda-based dentifrices are more effective in stain removal and whitening than some non-baking soda-containing dentifrices with a higher abrasivity. So far, research efforts have mainly focused on stain removal and tooth-whitening efficacy and clinical safety of baking soda dentifrices used with manual toothbrushes, with only a few studies investigating their effects using powered toothbrushes, for which further research is encouraged. As part of a daily oral hygiene practice, baking soda-based dentifrice is a desirable, alternative or additional measure for tooth stain removal and whitening. Copyright © 2017 American Dental Association. Published by Elsevier Inc. All rights reserved.

Effect of whitening dentifrices on the surface roughness of commercial composites.

PubMed

Barbieri, Guilherme Machado; Mota, Eduardo Gonçalves; Rodrigues-Junior, Sinval Adalberto; Burnett, Luiz Henrique

2011-10-01

Our study aimed to test the null hypothesis that whitening and non-whitening dentifrices affect similarly the surface roughness of commercial microhybrid composites, independent of the brushing time. One hundred and ninety-two disc-shaped specimens of Filtek Z250 (3 M/ESPE, St. Paul, MN, USA) and Rok (SDI, Australia) were built up and randomly assigned to 24 groups, based on the dentifrices used (two whitening dentifrices: Colgate Max White-Colgate-Palmolive, São Bernardo do Campo, São Paulo, Brazil and Close Up Extra Whitening-Unilever, Brasil Higiene Pessoal e Limpeza Ltda, Ipojuca, Pernambuco, Brazil; and one non-whitening dentifrice: Colgate Total 12 Clean Mint-Colgate-Palmolive), and on the simulated brushing times (24 hours, 6, 12 and 24 months). The specimens were submitted to the toothbrushing regimens after which the surface roughness (Ra) was measured. Data was submitted to analysis of variance and Tukey test (α=0.05). The composite's surface roughness was significantly affected by the composites (p=0.0007), the dentifrices (p=0.0001), and the simulated brushing time (p=0.0001). Higher roughness was observed when the whitening dentifrices were used and when the brushing time increased. Filtek Z250 was more affected than Rok, especially after 24 months of simulated brushing. Whitening dentifrices produced higher surface roughness in the composites tested. The degree of surface compromising increased with brushing time and depends on the composite's microstructure and composition. © 2011 Wiley Periodicals, Inc.

Effects of whitening dentifrice on yttria-stabilized tetragonal zirconia polycrystal surfaces after simulating brushing.

PubMed

Pinelli, Lígia Antunes Pereira; Gimenes Olbera, Amanda Caroline; Candido, Lucas Miguel; Miotto, Larissa Natiele; Antonio, Selma Gutierrez; Fais, Laiza Maria Grassi

2017-01-01

The changes that occur after brushing yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) are unknown. These changes may favor the retention of microorganisms and chemisorption of water, impairing its longevity. The purpose of this in vitro study was to evaluate the effects of a whitening dentifrice on Y-TZP surfaces after simulating 10 years of brushing. Seventy-two bar-shaped specimens (20×4×1.2 mm) were divided into 4 groups: storage in distilled water (SW, control), brushing with distilled water (BW), brushing with dentifrice (BD), and brushing with whitening dentifrice (BWD). Brushing was conducted using a linear brushing machine (878400 cycles, 0.98 N, soft toothbrush). The mean roughness (Ra) was analyzed with a profilometer and the superficial topography with scanning electron microscopy (SEM) at baseline and after treatment. Crystalline phases were characterized using x-ray diffraction. Baseline and posttreatment Ra were analyzed using the 1-way ANOVA and Tukey HSD multiple comparison test; the paired t test was used for intragroup comparison (all α=.05). The Ra (μm) means (before/after treatment) were SW 0.28/0.28; BW 0.32/0.31; BD 0.28/0.36; BWD 0.30/0.20. No statistically significant difference was found for Ra at baseline (P=.108) than for posttreatment results (P<.001); the BD group had higher Ra values when compared with baseline (P=.019); the BWD group had the lowest values (P<.001). The BD surfaces showed pronounced scratches and detachment of the surface, while BWD showed smoother surfaces; similar crystallographic results among groups were observed. Brushing Y-TZP with conventional dentifrice increased roughness, while brushing with whitening dentifrice reduced roughness. Neither dentifrice changed the crystallographic phases after brushing. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Two Randomized Clinical Studies to Confirm Differential Plaque Removal by Sodium Bicarbonate Dentifrices in a Single Timed Brushing Model.

PubMed

Mason, Stephen; Karwal, Ritu; Bosma, Mary Lynn

2017-09-01

This study evaluated and compared plaque removal efficacy of commercially available dentifrices containing sodium bicarbonate (NaHCO3) to those without NaHCO3 in a single timed brushing clinical study model. Two randomized, examiner-blind, three-period, three-treatment, crossover studies were performed in adults with a mean Turesky modification of the Quigley-Hein Plaque Index (TPI) score of = 2.00. In Study 1, 60 subjects were randomized to commercially available dentifrices containing: (i) 67% NaHCO3 plus 1425 ppm fluoride (F) as sodium fluoride (NaF); (ii) 45% NaHCO3 plus 1425 ppm F as NaF; or (iii) 0% NaHCO3 plus silica and 1450 ppm F as NaF. In Study 2, 55 subjects were randomized to commercially available dentifrices containing: (i) 67% NaHCO3 plus 1425 ppm F as NaF; (ii) 0% NaHCO3 plus silica and 1400 ppm F as amine F/stannous F; or (iii) 0% NaHCO3 plus chlorhexidine/aluminum lactate and silica with 1360 ppm F as aluminum F. In both studies, subjects brushed their teeth for one timed minute under supervised conditions. Plaque was assessed pre- and post-brushing according to a six-site modification of the TPI. Mean TPI score was analyzed using an analysis of covariance model with treatment and study period as fixed effects, subject as a random variable, and pre-brushing score as a covariate. In both studies, mean TPI score decreased in all groups post-brushing compared with pre-brushing. In Study 1, statistically significant improvements in mean TPI score were reported with the 67% and 45% NaHCO3 dentifrices compared with the 0% NaHCO3 dentifrice (p = 0.0003 and p = 0.0005, respectively). In Study 2, improvements in mean TPI score were statistically significantly greater with the 67% NaHCO3 dentifrice compared with both 0% NaHCO3 dentifrices (p < 0.0001 for both comparisons). All dentifrices were generally well tolerated. A single timed brushing with commercially available dentifrices containing 67% or 45% NaHCO3 exerted a significantly greater effect on plaque removal than commercially available dentifrices without NaHCO3.

The efficacy of a highly concentrated fluoride dentifrice on bovine enamel subjected to erosion and abrasion.

PubMed

Rios, Daniela; Magalhães, Ana Carolina; Polo, Renata Ocon Braga; Wiegand, Annette; Attin, Thomas; Buzalaf, Marilia Afonso Rabelo

2008-12-01

Researchers have proposed the use of fluoride for the prevention of enamel wear; however, only limited information is available about the impact of fluoridated dentifrices. Because tooth wear is a well-recognized dental problem, the authors conducted an in situ, ex vivo study to assess the efficacy of a highly concentrated fluoride dentifrice on bovine enamel subjected to erosion and abrasion. The authors conducted a double-blind, crossover in situ study consisting of three phases (seven days each). In each phase, the authors tested one of the dentifrices (5,000 parts per million fluoride [F]; 1,100 ppm F; no F). They performed erosive challenges with the use of cola drink (60 seconds, four times per day) and abrasive challenges via toothbrushing (30 seconds, four times per day). The authors determined the enamel loss via profilometry. The authors tested the data by using two-way analysis of variance (P < .05). For the erosion-plus-abrasion condition, the study results showed that enamel wear was significantly higher than that with erosion alone. The findings showed no significant differences between the dentifrices regarding enamel wear. Within the in situ, ex vivo conditions of this study, the authors concluded that the highly concentrated fluoride dentifrice did not have a protective effect on enamel against erosion and erosion plus toothbrushing abrasion. Patients at risk of developing enamel erosion should benefit from preventive measures other than fluoride dentifrice, because even a highly concentrated fluoride dentifrice does not appear to prevent enamel erosion.

Influence of whitening and regular dentifrices on orthodontic clear ligature color stability.

PubMed

Oliveira, Adauê S; Kaizer, Marina R; Salgado, Vinícius E; Soldati, Dener C; Silva, Roberta C; Moraes, Rafael R

2015-01-01

This study evaluated the effect of brushing orthodontic clear ligatures with a whitening dentifrice containing a blue pigment (Close Up White Now, Unilever, London, UK) on their color stability, when exposed to a staining agent. Ligatures from 3M Unitek (Monrovia, CA, USA) and Morelli (Sorocaba, SP, Brazil) were tested. Baseline color measurements were performed and nonstained groups (control) were stored in distilled water whereas test groups were exposed for 1 hour daily to red wine. Specimens were brushed daily using regular or whitening dentifrice. Color measurements were repeated after 7, 14, 21, and 28 days using a spectrophotometer based on the CIE L*a*b* system. Decreased luminosity (CIE L*), increased red discoloration (CIE a* axis), and increased yellow discoloration (CIE b* axis) were generally observed for ligatures exposed to the staining agent. Color variation was generally lower in specimens brushed with regular dentifrice, but ligatures brushed with whitening dentifrice were generally less red and less yellow than regular dentifrice. The whitening dentifrice led to blue discoloration trend, with visually detectable differences particularly apparent according to storage condition and ligature brand. The whitening dentifrice containing blue pigment did not improve the ligature color stability, but it decreased yellow discoloration and increased a blue coloration. The use of a whitening dentifrice containing blue pigment during orthodontic treatment might decrease the yellow discoloration of elastic ligatures. © 2015 Wiley Periodicals, Inc.

A randomized clinical study comparing the plaque inhibition effect of a SnF2/SHMP dentifrice (blend-a-med EXPERT GUMS PROTECTION) and a chlorhexidine digluconate dentifrice (Lacalut Aktiv).

PubMed

Bellamy, P G; Khera, N; Day, T N; Mussett, A J; Barker, M L

2009-01-01

To compare the plaque inhibition benefits of a control 0.454% stannous fluoride/sodium hexametaphosphate/sodium fluoride dentifrice (SnF2/SHMP with 1450 ppm F) to a chlorhexidine digluconate (0.05%), aluminum lactate (0.8%), and aluminum fluoride (AlF3/Chx with 1400 ppm F) dentifrice. Twenty-nine subjects were randomized to a two-period, two-treatment, double-blind crossover sequence using blend-a-med EXPERT GUMS PROTECTION toothpaste (SnF2/SHMP) and Lacalut Aktiv toothpaste (AlF3/Chx). Each treatment was used along with a standard manual toothbrush (Oral-B P35 Indicator) for 17 days. Digital plaque image analysis (DPIA) was used at the end of each period for three consecutive days to evaluate plaque levels; a) overnight (A.M. pre-brush); b) following 40 seconds of brushing with the test product (A.M. post-brush); and c) mid-afternoon (P.M.). Images were analyzed using an objective computer algorithm to calculate the total area of visible plaque. A four-day washout period was instituted for the crossover phase. Twenty-seven subjects completed the study. The SnF2/SHMP dentifrice provided a statistically significant lower level of plaque area coverage compared to the AlF3/Chx dentifrice at all time points. For the SnF2/SHMP dentifrice, plaque coverage was 19.4% lower (p = 0.0043) at the A.M. pre-brush, 25.6% lower (p = 0.0014) at the A.M. post-brush, and 19.8% lower (p = 0.0057) at the P.M. measure relative to the AlF3/Chx dentifrice. The blend-a-med EXPERT GUMS PROTECTION toothpaste inhibits plaque regrowth, both overnight and during the day, to a significantly greater degree than Lacalut Aktiv. Additionally, immediately after brushing with blend-a-med EXPERT GUMS PROTECTION, subjects had significantly less plaque than after brushing with Lacalut Aktiv.

Effectiveness and mode of action of whitening dentifrices on enamel extrinsic stains.

PubMed

Alshara, Salem; Lippert, Frank; Eckert, George J; Hara, Anderson T

2014-01-01

This study was conducted in order to investigate the mode of action and the whitening effect of whitening dentifrices. Two hundred fifty-six bovine enamel specimens (10 × 10 mm(2)) were prepared, partially stained, and assigned into eight groups (n = 32): six whitening dentifrices, one nonwhitening and deionized water (negative control), and further divided in two subgroups (n = 16), according to the test model: chemical (dentifrice slurry treatment only) or chemo-mechanical (slurry + toothbrushing). Specimens were treated with dentifrice slurries 2 ×/day for 1 min and toothbrushed or not, according to each model. In between dentifrice treatments, specimens were artificially stained for 5 h. This protocol was repeated for 5 days and enamel color changes (∆E) were measured after each day (days 1-5). The abrasive level of the dentifrices was determined following the ISO11609 guidelines. In the chemo-mechanical model, the whitening action of all dentifrices was observed after day 1, being higher than the negative control group (p < 0.05). In days 2-5, nonsignificant changes in color were observed for all groups (p > 0.05). Differences on ∆E among dentifrices were observed, and they seemed to correlate well with their abrasive level (r(2) = 0.80). In the chemical model, no significant differences were observed among groups (p > 0.05), with ∆E remaining constant throughout the study. Higher ∆E values were observed in the chemo-mechanical model compared to the chemical (p < 0.05). All tested dentifrices were effective in whitening stained enamel and their mode of action showed to be mainly mechanical (toothbrushing abrasion). The abrasive level of dentifrices seems to determine its whitening effectiveness.

The use of sodium bicarbonate in oral hygiene products and practice.

PubMed

Newbrun, E

1996-01-01

Early dentifrices contained natural ingredients, mostly in coarse particle form, and were quite abrasive. Salts, either sodium chloride, sodium bicarbonate, or a mixture of both, have also been used for tooth cleaning because of their ready availability and low cost. Because of both their relatively low intrinsic hardness and their high solubility, another advantage is low abrasivity. Their biggest disadvantage is a salty, unpalatable taste. Many modern dentifrices that contain sodium bicarbonate, either as the sole abrasive or one of several, disguise the saltiness with flavoring and sweetening agents. An almost inverse relationship exists between the percentage of baking soda in a dentifrice and its abrasivity. Sodium bicarbonate has no anticaries activity per se but is compatible with fluoride. In high concentrations, sodium bicarbonate is bactericidal against most periodontal pathogens. Most clinical studies have not found significant differences in periodontal response to baking soda as compared with other commercial dentifrices, probably because of its rapid clearance from the gingival sulcus. Sodium bicarbonate may not be the "magic bullet" for curing dental diseases, but its safety (if ingested), low abrasivity, low cost, and compatibility with fluoride make it a consummate dentifrice ingredient.

The use of sodium bicarbonate in oral hygiene products and practice.

PubMed

Newbrun, E

1997-01-01

Early dentifrices contained natural ingredients, mostly in coarse particle form, and were quite abrasive. Salts, either sodium chloride, sodium bicarbonate, or a mixture of both, have also been used for tooth cleaning because of their ready availability and low cost. Because of both their relatively low intrinsic hardness and their high solubility, another advantage is low abrasivity. Their biggest disadvantage is a salty, unpalatable taste. Many modern dentifrices that contain sodium bicarbonate, either as the sole abrasive or one of several, disguise the saltiness with flavoring and sweetening agents. An almost inverse relationship exists between the percentage of baking soda in a dentifrice and its abrasivity. Sodium bicarbonate has no anticaries activity per se but is compatible with fluoride. In high concentrations, sodium bicarbonate is bactericidal against most periodontal pathogens. Most clinical studies have not found significant differences in periodontal response to baking soda as compared with other commercial dentifrices, probably because of its rapid clearance from the gingival sulcus. Sodium bicarbonate may not be the "magic bullet" for curing dental diseases, but its safety (if ingested), low abrasivity, low cost, and compatibility with fluoride make it a consummate dentifrice ingredient.

Association Between Socioeconomic Factors and the Choice of Dentifrice and Fluoride Intake by Children

PubMed Central

Martins, Carolina Castro; Oliveira, Maria José; Pordeus, Isabela Almeida; Cury, Jaime Aparecido; Paiva, Saul Martins

2011-01-01

It is questionable whether socioeconomic factors influence the choice of marketed children’s dentifrices and whether these products are associated with greater fluoride (F) intake in children. The present cross-sectional study involving 197 children (mean age: 40.98 ± 6.62 months) was carried out in Montes Claros, Brazil. Parents completed a questionnaire on socioeconomic status and the tooth brushing habits of their children. The children brushed their teeth and saliva residues were collected for F analysis. F intake from dentifrice was determined with an ion-specific electrode. Univariate analysis and logistic regression were used to test whether the type of dentifrice (children’s or family) and F dose (<0.05 and ≥0.05 mg F/Kg of body weight/day) were associated with the independent variables (p < 0.05). No differences were found between children’s and family dentifrices regarding daily F intake (0.046 and 0.040 mg F/Kg/day, respectively; p = 0.513). The following were strong predictors for the use of a children’s dentifrice: studying at a private kindergarten (OR: 6.89; p < 0.001); age that the child begun to tooth brush <2 years (OR: 2.93; p = 0.041), and the interaction between the variables “use of the same dentifrice as parents” and “type of tooth brush used” (OR: 27.20; p < 0.001). “The amount of dentifrice used” and “frequency of tooth brushing” (p ≤ 0.004) had a statistically and synergistic effect over the daily F dose. The present study found a social influence over the choice of dentifrice: children with a high socioeconomic status tend to use a children’s dentifrice. The amount of dentifrice used can strongly increase the risk of exposure to higher doses of F, regardless of the type of dentifrice. PMID:22163207

Effects of a triclosan dentifrice on plaque formation, gingivitis and gingival bleeding in pregnant women: five-month clinical results.

PubMed

Kraivaphan, P; Amornchat, C; Triratana, T

2007-05-01

The objective of this study was to determine the effects of a triclosan/copolymer dentifrice on plaque formation, gingivitis and gingival bleeding in pregnant subjects. This double-blind clinical study was carried out in 180 women at 3 months of pregnancy. The subjects were stratified into two balanced groups according to their baseline plaque, gingivitis and bleeding scores. Subjects received a thorough dental prophylaxis and were assigned to brush with either a placebo or triclosan dentifrice for five months. They were instructed to brush their teeth as they normally would, twice a day for one minute per brushing. Follow-up examinations after five months of dentifrice use evaluated supragingival plaque, gingivitis and gingival bleeding. After five months, the triclosan dentifrice significantly reduced plaque formation, gingivitis and gingival bleeding by 40.5%, 22.5% and 35.3%, respectively, compared to the placebo group (p<0.05).

In vivo antiplaque efficacy of combined antimicrobial dentifrice and rinse hygiene regimens.

PubMed

White, Donald J; Barker, Matthew L; Klukowska, Malgorzata

2008-06-01

To evaluate using digital plaque image analysis the antiplaque efficacy of oral care regimens including use of antimicrobial toothpaste in combination with antimicrobial mouthrinse. 16 subjects completed the study protocol including: (1) initial treatment phase, all subjects used a standard sodium fluoride dentifrice with 2x/day brushing, (2) second treatment phase, subjects were randomized to two treatment groups: stannous fluoride/sodium hexametaphosphate dentifrice or sodium fluoride triclosan/copolymer dentifrice; (3) third treatment phase, the group using stannous fluoride dentifrice rinsed with alcohol-free cetylpyridinium chloride mouthrinse and the group using triclosan dentifrice rinsed with essential oil mouthrinse. During each phase, plaque levels were assessed in the morning before toothbrushing (AM), post-brushing in the morning (PB) and in the afternoon (PM). Stannous fluoride dentifrice was superior to triclosan dentifrice in plaque growth inhibition between toothbrushing. Both mouthrinses provided additional plaque prevention benefits when used with antimicrobial dentifrices. The cetylpyridinium chloride mouthrinse and stannous fluoride dentifrice regimen was particularly effective, building accretive efficacy over time. Average plaque reductions exceeded 50% vs. sodium fluoride dentifrice alone. Chemotherapeutic dentifrices and rinses increase plaque control used alone and particularly in combination. The stannous fluoride-cetylpyridinium chloride regimen showed the greatest benefits.

Surface texture and composition of titanium brushed with toothpaste slurries of different pHs.

PubMed

Hossain, Awlad; Okawa, Seigo; Miyakawa, Osamu

2007-02-01

This in vitro study characterized the surface texture and composition of titanium brushed with toothpaste slurries of different pHs, and thereby elucidated mechanochemical interactions between the metal and abrasive material in dentifrice. Two fluoride-free toothpastes, which contained crystalline CaHPO(4).2H(2)O and amorphous SiO(2) particles as abrasive, were mixed with acidic buffers to provide slurries of pH 6.8 and 4.8. Specimens were cast from CP Ti, mirror-polished, and then toothbrushed at 120strokes/min for 350,400 strokes under a load of 2.45N. Specimen surfaces were characterized by means of SPM and EPMA. The obtained data were compared with the already reported results of water-diluted alkaline slurries. SPM data of each paste were analyzed using one-way ANOVA, followed by post hoc Tukey test. Irrespective of toothpaste, neutral slurries, as with alkaline slurries, yielded a chemically altered surface with rough texture, whereas acidic slurries formed a chemically clean surface with relatively smooth texture. Mechanochemical polishing effect might be mainly responsible for the cleanness and smoothness. Acidic slurry-induced smooth surface may minimize plaque formation. However, the augmentation of released titanium ions may be adverse to the human body. For evaluation of toothpaste abrasion effects on titanium, paste slurry pH should be taken into account.

Comparative evaluation of effect of use of toothbrush with paste and munident on levels of Streptococcus mutans and gingival health in children: An in vivo study.

PubMed

Shetty, Rashmi N; Shetty, Sowmya B; Janardhanan, Sruthi; Shetty, Shamila; Shetty, Sharan; Raj, Kiran

2017-01-01

Dental caries is a multifactorial disease which has a deleterious effect on the oral cavity. Improper oral hygiene habits are a cause for the same. The aim of this study was to compare the antibacterial efficacy of Munident, an Ayurvedic (herbal) dentifrice with commercially available toothpaste. A total of forty subjects between the age group 9 and 12 years, resident of Bala Yeshu Nilaya Bhavan, Mangalore, Karnataka, India, were chosen for our study. They were divided into two groups containing twenty subjects in each; Group 1 for standard toothpaste and Group 2 for Munident. The decayed, missing, and filled teeth scores were noted from each subject. Group 1 was instructed to brush the teeth using commercially available toothpaste and Group 2 was instructed to brush using commercially available Munident (herbal) dentifrice. Both the groups brushed the teeth using soft variety of tooth brush. The gingival bleeding index and salivary Streptococcus mutans count were noted pre- and post-brushimg for both groups. The results obtained were subjected to statistical analysis. Munident (herbal) dentifrice showed better efficacy in comparison to toothpaste in terms of gingival bleeding index and salivary S. mutans count. Munident (herbal) dentifrice has better gingival bleeding index compared to standard formulation of toothpaste. Hence, the practice of using herbal dentifrice should be encouraged.

Evaluation of ex vivo effectiveness of commercial desensitizing dentifrices

PubMed Central

Mockdeci, Hanny; Polonini, Hudson; Granato, Ana-Paula; Raposo, Nádia; Chaves, Maria-das Graças

2017-01-01

Background Dentin hypersensitivity is a short, severe pain with fast onset. Therapy aims to either prevent or decrease neural transmission or physically occlude the dentinal tubules. This study aimed to evaluate the effectiveness of commercial desensitizing dentifrice by means of an ex vivo method. Material and Methods Samples (n=8 lower human premolars for each group) were randomly allocated into: G1- brushing with Colgate®Sensitive Pro-Relief; G2- brushing with Sensodyne®Rapid Relief; G3- brushing with Sensodyne®Repair & Protect; and G4- brushing with Colgate®Maximum Cavity Protection. The test bodies were submitted to simulated toothbrushing and dentifrices were analyzed regarding their hydrodynamic size, polydispersity index (PI) and zeta potential. Specimens were evaluated using: scanning electron microscopy (SEM); spectroscopy energy dispersive X-ray (EDS); and profilometry. A qualitative analysis of the photomicrographs and topographies was performed. Results The dentifrices showed statistical similar physical and chemical characteristics. They also demonstrated obliteration of dentinal tubules when micrographs were observed. Regarding the chemical elements present in the dentin samples, there was a statistically significant difference between the control and experimental surfaces in the four groups. Conclusions Joint data analysis shows that the desensitizing dentifrice showed better results with regards to the obliteration of dentinal tubules compared to positive and negative controls. Key words:Dentin hypersensitivity, dentin desensitizing agents, toothpastes. PMID:28469813

Comparison of the clinical efficacy in reducing dentin hypersensitivity of a new dentifrice containing 8.0% arginine, calcium carbonate, and 1000 ppm sodium monofluorophosphate to a commercially available toothpaste containing 1000 ppm sodium monofluorophosphate: an eight-week clinical trial on adults in New Delhi, India.

PubMed

Kakar, A; Kakar, K; Sreenivasan, P K; DeVizio, W; Kohli, R

2012-01-01

This clinical study evaluated relief from dentin hypersensitivity among subjects who brushed their teeth with a new dentifrice containing 8.0% arginine, calcium carbonate, and 1000 ppm fluoride as sodium monofluorophosphate (MFP) to subjects who brushed with a commercially available dentifrice containing 1000 ppm MFP over an eight-week period. Adult subjects from the New Delhi, India area, with two teeth that exhibited dentin hypersensitivity, both to tactile stimulation using the Yeaple Probe and to stimulation using an air blast delivered by a standard dental unit syringe, were screened for study enrollment. Qualifying subjects were randomly assigned one of the study dentifrices and instructed to brush their teeth for one minute, twice daily (morning and evening) with the provided dentifrice. Follow-up examinations for dentin hypersensitivity were conducted after two, four, and eight weeks of product use. Subjects provided with the new dentifrice containing 8.0% arginine, calcium carbonate, and 1000 ppm MFP exhibited statistically significantly (p < 0.05) greater reductions in dentin hypersensitivity in response to tactile (81.9%, 90.5%, and 116.7%) and air blast (39.5%, 56.7%, and 76.7%) stimuli than subjects assigned the 1000 ppm MFP dentifrice after two, four, and eight weeks, respectively. The use of a new dentifrice containing 8.0% arginine, calcium carbonate, and 1000 ppm MFP provides superior efficacy in reducing dentin hypersensitivity (p < 0.05) than a control dentifrice containing 1000 ppm MFP alone after two, four, and eight weeks of use.

Effects of regular and whitening dentifrices on remineralization of bovine enamel in vitro.

PubMed

Kielbassa, Andrej M; Tschoppe, Peter; Hellwig, Elmar; Wrbas, Karl-Thomas

2009-02-01

To compare in vitro the remineralizing effects of different regular dentifrices and whitening dentifrices (containing pyrophosphates) on predemineralized enamel. Specimens from 84 bovine incisors were embedded in epoxy resin, partly covered with nail varnish, and demineralized in a lactic acid solution (37 degrees C, pH 5.0, 8 days). Parts of the demineralized areas were covered with nail varnish, and specimens were randomly assigned to 6 groups. Subsequently, specimens were exposed to a remineralizing solution (37 degrees C, pH 7.0, 60 days) and brushed 3 times a day (1:3 slurry with remineralizing solution) with 1 of 3 regular dentifrices designed for anticaries (group 1, amine; group 2, sodium fluoride) or periodontal (group 3, amine/stannous fluoride) purposes or whitening dentifrice containing pyrophosphates (group 4, sodium fluoride). An experimental dentifrice (group 5, without pyrophosphates/fluorides) and a whitening dentifrice (group 6, monofluorophosphate) served as controls. Mineral loss and lesion depths were evaluated from contact microradiographs, and intergroup comparisons were performed using the closed-test procedure (alpha =.05). Compared to baseline, specimens brushed with the dentifrices containing stannous/amine fluorides revealed significant mineral gains and lesion depth reductions (P < .05). Concerning the reacquired mineral, the whitening dentifrice performed worse than the regular dentifrices (P > .05), while mineral gain, as well as lesion depth, reduction was negligible with the control groups. Dentifrices containing pyrophosphates perform worse than regular dentifrices but do not necessarily affect remineralization. Unless remineralizing efficacy is proven, whitening dentifrices should be recommended only after deliberate consideration in caries-prone patients.

Control of brushing variables for the in vitro assessment of toothpaste abrasivity using a novel laboratory model.

PubMed

Parry, Jason; Harrington, Edward; Rees, Gareth D; McNab, Rod; Smith, Anthony J

2008-02-01

Design and construct a tooth-brushing simulator incorporating control of brushing variables including brushing force, speed and temperature, thereby facilitating greater understanding of their importance in toothpaste abrasion testing methodologies. A thermostable orbital shaker was selected as a base unit and 16- and 24-specimen brushing rigs were constructed to fit inside, consisting of: a square bath partitioned horizontally to provide brushing channels, specimen holders for 25 mm diameter mounted specimens to fit the brushing channels and individually weighted brushing arms, able to support four toothbrush holders suspended over the brushing channels. Brush head holders consisted of individually weighted blocks of Delrin, or PTFE onto which toothbrush heads were fixed. Investigating effects of key design criteria involved measuring abrasion depths of polished human enamel and dentine. The brushing simulator demonstrated good reproducibility of abrasion on enamel and dentine across consecutive brushing procedures. Varying brushing parameters had a significant impact on wear results: increased brushing force demonstrated a trend towards increased wear, with increased reproducibility for greater abrasion levels, highlighting the importance of achieving sufficient wear to optimise accuracy; increasing brushing temperature demonstrated increased enamel abrasion for silica and calcium carbonate systems, which may be related to slurry viscosities and particle suspension; varying brushing speed showed a small effect on abrasion of enamel at lower brushing speed, which may indicate the importance of maintenance of the abrasive in suspension. Adjusting key brushing variables significantly affected wear behaviour. The brushing simulator design provides a valuable model system for in vitro assessment of toothpaste abrasivity and the influence of variables in a controlled manner. Control of these variables will allow more reproducible study of in vitro tooth wear processes.

In vitro assessments of experimental NaF dentifrices containing a prospective calcium phosphate technology.

PubMed

Karlinsey, Robert L; Mackey, Allen C; Stookey, George K; Pfarrer, Aaron M

2009-06-01

To determine the fluoride dose response of experimental NaF dentifrices containing a prospective calcium phosphate technology, along with the corresponding relative enamel and dentin abrasion values. 3 mm diameter bovine enamel specimens were mounted, ground and polished, and softened in a carbopol-lactic acid solution (pH = 5.0) for 36 hours at 37 degrees C. Specimens were then measured for baseline Vickers microhardness and stratified (N = 18, mean VHN = 33) into eight groups. These groups consisted of a placebo paste, four test dentifrices (A, B, C, D) with three of the four (A, B, C) containing a promising calcium phosphate ingredient, Crest Cavity Protection, MI Paste Plus, and PreviDent Booster 5000. The groups were cycled in a lesion reversal pH cycling model consisting of four 2-minute treatment periods (diluted 1:3 with DI water) and one 4-hour acid challenge (carbopol-lactic acid, pH = 5.0) per day. Between these events, specimens were immersed in artificial saliva (pH = 7.0). After 20 days of cycling, the specimens were microdrilled and analyzed for fluoride content, and also measured for Vickers surface microhardness after 10 and 20 days of cycling and after a 2-hour and 16-hour post-cycle acid challenge (carbopol-lactic acid, pH = 5.0). Separately, relative dentin and enamel abrasion (RDA and REA) were performed using the ADA recommended radiotracer method. A fluoride dose response was observed for the test dentifrices after 10 and 20 days of pH cycling, with test dentifrice C promoting the highest remineralization among the groups while both the MI Paste Plus and PreviDent systems provide the least remineralization (one-way ANOVA, SNK, P < 0.05). With respect to enamel fluoride uptake, the group facilitating the highest incorporation of fluoride into the enamel lesion was test dentifrice C, while the least effective NaF system was the MI Paste Plus (one-way ANOVA, SNK, P < 0.05). In terms of formulation abrasion, the REA scores were similar among the test dentifrices, MI Paste Plus, and PreviDent and compared favorably to the ADA reference material score (one-way ANOVA, SNK, P < 0.05); relative to the ADA reference material RDA score, the data indicate that MI Paste Plus was essentially non-abrasive, while PreviDent was significantly more abrasive to dentin (one-way ANOVA, SNK, P < 0.05). Altogether, these data show the developmental test dentifrices demonstrate a fluoride dose response and show great promise in remineralizing white-spot enamel lesions relative to MI Paste Plus and PreviDent.

Surface Roughness of Composite Resins after Simulated Toothbrushing with Different Dentifrices.

PubMed

Monteiro, Bruna; Spohr, Ana Maria

2015-07-01

The aim of the study was to evaluate, in vitro, the surface roughness of two composite resins submitted to simulated toothbrushing with three different dentifrices. Totally, 36 samples of Z350XT and 36 samples of Empress Direct were built and randomly divided into three groups (n = 12) according to the dentifrice used (Oral-B Pro-Health Whitening [OBW], Colgate Sensitive Pro-Relief [CS], Colgate Total Clean Mint 12 [CT12]). The samples were submitted to 5,000, 10,000 or 20,000 cycles of simulated toothbrushing. After each simulated period, the surface roughness of the samples was measured using a roughness tester. According to three-way analysis of variance, dentifrice (P = 0.044) and brushing time (P = 0.000) were significant. The composite resin was not significant (P = 0.381) and the interaction among the factors was not significant (P > 0.05). The mean values of the surface roughness (µm) followed by the same letter represent no statistical difference by Tukey's post-hoc test (P <0.05): Dentifrice: CT12 = 0.269(a); CS Pro- Relief = 0.300(ab); OBW = 0.390(b). Brushing time: Baseline = 0,046ª; 5,000 cycles = 0.297(b); 10,000 cycles = 0.354(b); 20,000 cycles = 0.584(c). Z350 XT and Empress Direct presented similar surface roughness after all cycles of simulated toothbrushing. The higher the brushing time, the higher the surface roughness of composite resins. The dentifrice OBW caused a higher surface roughness in both composite resins.

Effect of whitening dentifrices on the surface roughness of a nanohybrid composite resin

PubMed Central

da Rosa, Gabriela Migliorin; da Silva, Luciana Mendonça; de Menezes, Márcio; do Vale, Hugo Felipe; Regalado, Diego Ferreira; Pontes, Danielson Guedes

2016-01-01

Objectives: The present study verified the influence of whitening dentifrices on the surface roughness of a nanohybrid composite resin. Materials and Methods: Thirty-two specimens were prepared with Filtek™ Z350 XT (3M/ESPE) and randomly divided into four groups (n = 08) that were subjected to brushing simulation equivalent to the period of 1 month. The groups assessed were a control group with distilled water (G1), Colgate Total 12 Professional Clean (G2), Sensodyne Extra Whitener Extra Fresh (G3), and Colgate Luminous White (G4). A sequence of 90 cycles was performed for all the samples. The initial roughness of each group was analyzed by the Surface Roughness Tester (TR 200-TIME Group Inc., CA, USA). After the brushing period, the final roughness was measured, and the results were statistically analyzed using nonparametric Kruskal–Wallis and Dunn tests for intergroup roughness comparison in the time factor. For intragroup and “Δ Final − Initial” comparisons, the Wilcoxon test and (one-way) ANOVA were, respectively, performed (α = 0.05). Results: The roughness mean values before and after brushing showed no statistically significant difference when the different dentifrices were used. None of the dentifrices analyzed increased significantly the nanohybrid composite resin surface roughness in a 1 month of tooth brushing simulation. Conclusions: These results suggest that no hazardous effect on the roughness of nanohybrid composite resin can be expected when whitening dentifrices are used for a short period. Similar studies should be conducted to analyze other esthetic composite materials. PMID:27095891

3D-Image analysis of the impact of toothpaste abrasivity on the progression of simulated non-carious cervical lesions.

PubMed

Sabrah, Alaa H; Turssi, Cecilia P; Lippert, Frank; Eckert, George J; Kelly, Adam B; Hara, Anderson T

2018-06-01

To investigate the effect of toothpaste abrasive level on the progression of non-carious cervical lesions (NCCLs) using 3D-image subtraction. Upper first premolars were allocated into seven groups (n = 16) of toothpaste/abrasive slurries: A-Zeodent113/5%, B-Zeodent124/10%, C-Zeodent103/15%, D-Sensodyne Pronamel, E-Crest Cavity-Protection, F-Crest Pro-Health-Whitening, and G-Deionized water (DIW). Teeth were mounted on acrylic blocks, and their root surfaces covered with acrylic resin, except for 2-mm near the cemento-enamel junction that was exposed to toothbrushing. Specimens were brushed with the slurries for 5000-, 15,000-, 35,000- and 65,000-strokes. Impressions were taken at baseline and after each brushing time, and then scanned by a 3D optical profilometer. Dentine volume loss was calculated by image subtraction software and subjected to mixed-model ANOVA and multiple comparison tests (α = 0.05). No significant differences among slurries were observed at 5000 and 15,000. At 35,000, F showed higher loss than all other groups except C, which did not differ from the others. At 65,000, F (4.19 ± 3.29 mm 3 ) showed the highest loss, followed by C (2.33 ± 1.47 mm 3 ), which differed from all the other groups except B (1.85 ± 0.91 mm 3 ). Groups B, A (1.35 ± 0.65 mm 3 ), D (1.17 ± 0.48 mm 3 ), E (1.40 ± 0.68 mm 3 ) and G (1.12 ± 0.73 mm 3 ) did not differ from each other. Groups F and C showed significant increase of volume loss starting at 35,000, while B, A, D and E only at 65,000; no increase loss was observed for G. 3D-image subtraction was able to quantify and differentiate tooth loss, but only at advanced stages. The progression of NCCLs was more evident and faster for highly abrasive slurries. Upon root dentin exposure, brushing with lower abrasive dentifrices is advisable to reduce the risk for NCCLs development. Copyright © 2018 Elsevier Ltd. All rights reserved.

Surface Roughness of Composite Resins after Simulated Toothbrushing with Different Dentifrices

PubMed Central

Monteiro, Bruna; Spohr, Ana Maria

2015-01-01

Background: The aim of the study was to evaluate, in vitro, the surface roughness of two composite resins submitted to simulated toothbrushing with three different dentifrices. Materials and Methods: Totally, 36 samples of Z350XT and 36 samples of Empress Direct were built and randomly divided into three groups (n = 12) according to the dentifrice used (Oral-B Pro-Health Whitening [OBW], Colgate Sensitive Pro-Relief [CS], Colgate Total Clean Mint 12 [CT12]). The samples were submitted to 5,000, 10,000 or 20,000 cycles of simulated toothbrushing. After each simulated period, the surface roughness of the samples was measured using a roughness tester. Results: According to three-way analysis of variance, dentifrice (P = 0.044) and brushing time (P = 0.000) were significant. The composite resin was not significant (P = 0.381) and the interaction among the factors was not significant (P > 0.05). The mean values of the surface roughness (µm) followed by the same letter represent no statistical difference by Tukey's post-hoc test (P <0.05): Dentifrice: CT12 = 0.269a; CS Pro- Relief = 0.300ab; OBW = 0.390b. Brushing time: Baseline = 0,046ª; 5,000 cycles = 0.297b; 10,000 cycles = 0.354b; 20,000 cycles = 0.584c. Conclusion: Z350 XT and Empress Direct presented similar surface roughness after all cycles of simulated toothbrushing. The higher the brushing time, the higher the surface roughness of composite resins. The dentifrice OBW caused a higher surface roughness in both composite resins. PMID:26229362

Assessment of the effects of a stannous fluoride dentifrice on gingivitis in a two-month positive-controlled clinical study.

PubMed

He, Tao; Barker, Matthew L; Biesbock, A R; Sharma, N C; Qaqish, J; Goyal, C R

2012-01-01

The purpose of this study was to evaluate the anti-gingivitis effectiveness of a 0.454% stannous fluoride test dentifrice relative to a marketed positive-control triclosan-containing dentifrice in adults with gingivitis. This was a two-month, randomized and controlled, double-blind, parallel group, single-center investigation involving 150 adults with existing mild to moderate gingivitis. Pre-treatment gingivitis levels were assessed at baseline using the Lobene Modified Gingival Index (MGI) and the Gingival Bleeding Index (GBI). Qualified subjects were randomly assigned to either a 0.454% stannous fluoride test dentifrice or a marketed, positive-control 0.30% triclosan/copolymer dentifrice. Subjects then brushed for two months unsupervised in the home setting with their assigned dentifrice per manufacturer's instructions. At Month 2, subjects were re-evaluated for gingivitis via MGI and GBI examinations. All 150 enrolled subjects completed the trial and were evaluable. Both the stannous fluoride test and triclosan/copolymer control dentifrices provided statistically significant reductions in average MGI, GBI, and number of bleeding sites relative to pre-treatment (p < 0.0001) at Month 2. The adjusted mean improvement from baseline at Month 2 for the stannous fluoride test dentifrice group was 65% greater for number of bleeding sites, 62% greater for GBI, and 45% greater for MGI compared to the triclosan/copolymer positive-control group, with groups differing significantly (p < 0.0001) via each of the three gingivitis measures. Both dentifrices were well-tolerated. An advanced stannous fluoride test dentifrice provided superior reductions in gingival inflammation and gingival bleeding compared to a commercially available triclosan/copolymer positive-control dentifrice after two months of tooth brushing.

A clinical investigation of the efficacy of two dentifrices for the reduction of supragingival calculus formation.

PubMed

Schiff, Thomas; Delgado, Evaristo; DeVizio, William; Proskin, Howard M

2008-01-01

The objective of this double-blind clinical study, conducted in harmony with Volpe-Manhold design for studies of dental calculus, was to compare the efficacy of a dentifrice containing 0.3% triclosan/2.0% polyvinylmethyl ether/maleic acid (PVM/MA) copolymer/0.243% sodium fluoride in a 17% dual silica base (Colgate Total Advanced Toothpaste) to that of a commercially available dentifrice containing 0.243% sodium fluoride in a silica base (Crest Cavity Protection Toothpaste) with respect to the reduction of supragingival calculus formation. Adult male and female subjects from the San Francisco area were entered into the eight-week pre-test phase of the study. Subjects received an evaluation of oral soft and hard tissues and were given a complete oral prophylaxis. They were provided with a non-tartar control placebo dentifrice and a soft-bristled adult toothbrush, and were instructed to brush their teeth twice daily (morning and evening) for one minute. After eight weeks of using the placebo dentifrice, subjects were examined for baseline supragingival calculus formation using the Volpe-Manhold Calculus Index. Qualifying subjects were randomized into two treatment groups which were balanced for gender and baseline calculus scores. All subjects entered into the twelve-week test phase were given a complete oral prophylaxis, and were provided with their assigned dentifrice and a soft-bristled adult toothbrush for home use. Subjects were instructed to brush their teeth for one minute twice daily (in the morning and evening). Prior to each study visit, subjects refrained from brushing their teeth and eating and drinking for four hours. Seventy-seven (77) subjects complied with the protocol and completed the study. At the twelve-week examination, the Test Dentifrice group presented a mean Volpe-Manhold Calculus Index score of 13.22 and the Control Dentifrice group presented a score of 20.29. After twelve weeks of product use, the Test Dentifrice group exhibited 34.8% less supragingival calculus formation than the Control Dentifrice group (statistically significant at p < 0.05). The overall results of this double-blind clinical study support the conclusion that after twelve weeks' use of a dentifrice containing 0.3% triclosan/2.0% PVM/MA copolymer/0.243% sodium fluoride in a 17% dual silica base provides significantly greater control of supragingival calculus formation relative to that of a commercially available dentifrice containing 0.243% sodium fluoride in a silica base.

Using DGGE and 16S rRNA gene sequence analysis to evaluate changes in oral bacterial composition.

PubMed

Chen, Zhou; Trivedi, Harsh M; Chhun, Nok; Barnes, Virginia M; Saxena, Deepak; Xu, Tao; Li, Yihong

2011-01-01

To investigate whether a standard dental prophylaxis followed by tooth brushing with an antibacterial dentifrice will affect the oral bacterial community, as determined by denaturing gradient gel electrophoresis (DGGE) combined with 16S rRNA gene sequence analysis. Twenty-four healthy adults were instructed to brush their teeth using commercial dentifrice for 1 week during a washout period. An initial set of pooled supragingival plaque samples was collected from each participant at baseline (0 h) before prophylaxis treatment. The subjects were given a clinical examination and dental prophylaxis and asked to brush for 1 min with a dentifrice containing 0.3% triclosan, 2.0% PVM/MA copolymer and 0.243% sodium fluoride (Colgate Total). On the following day, a second set of pooled supragingival plaque samples (24 h) was collected. Total bacterial genomic DNA was isolated from the samples. Differences in the microbial composition before and after the prophylactic procedure and tooth brushing were assessed by comparing the DGGE profiles and 16S rRNA gene segments sequence analysis. Two distinct clusters of DGGE profiles were found, suggesting that a shift in the microbial composition had occurred 24 h after the prophylaxis and brushing. A detailed sequencing analysis of 16S rRNA gene segments further identified 6 phyla and 29 genera, including known and unknown bacterial species. Importantly, an increase in bacterial diversity was observed after 24 h, including members of the Streptococcaceae family, Prevotella, Corynebacterium, TM7 and other commensal bacteria. The results suggest that the use of a standard prophylaxis followed by the use of the dentifrice containing 0.3% triclosan, 2.0% PVM/MA copolymer and 0.243% sodium fluoride may promote a healthier composition within the oral bacterial community.

A randomised clinical trial to evaluate the effect of a 67 % sodium bicarbonate-containing dentifrice on 0.2 % chlorhexidine digluconate mouthwash tooth staining.

PubMed

Akwagyiram, Ivy; Butler, Andrew; Maclure, Robert; Colgan, Patrick; Yan, Nicole; Bosma, Mary Lynn

2016-08-25

Gingivitis can develop as a reaction to dental plaque. It can be limited by curtailing plaque build-up through actions including tooth brushing and the use of medicinal mouthwashes, such as those containing chlorhexidine digluconate (CHX), that can reach parts of the mouth that may be missed when brushing. This study aimed to compare dental stain control of twice-daily brushing with a sodium fluoride (NaF) dentifrice containing 67 % sodium bicarbonate (NaHCO3) or a commercially available NaF silica dentifrice without NaHCO3, while using a mouthwash containing 0.2 % CHX. This was a 6-week, randomised, two-site, examiner-blind, parallel-group study in healthy subjects with at least 'mild' stain levels on the facial surfaces of ≥4 teeth and ≥15 bleeding sites. Assessment was via modified Lobene Stain Index (MLSI), the score being the mean of stain intensity multiplied by area (MLSI [IxA]). One hundred and fifty of 160 randomised subjects completed the study. There were no significant differences in Overall (facial and lingual) MLSI (IxA) scores between dentifrices. The Facial MLSI (IxA) was statistically significant at 6 weeks, favouring the 67 % NaHCO3 dentifrice (p = 0.0404). Post-hoc analysis, conducted due to a significant site interaction, found significant differences for all MLSI scores in favour of the 67 % NaHCO3 dentifrice at Site 1 (both weeks) but not Site 2. No overall significant differences were found between a 67 and 0 % NaHCO3 dentifrice in controlling CHX stain; a significant difference on facial surfaces suggests advantage of the former on more accessible surfaces. This study was registered at ClinicalTrials.gov ( NCT01962493 ) on 10 October 2013 and was funded by GSK Consumer Healthcare.

Relative extrinsic stain removal effectiveness of a new battery-powered toothbrush and a flat trim manual toothbrush.

PubMed

Hunt, Sheri A; Bartizek, Robert D

2004-01-01

To evaluate the stain removal efficacy of two different toothbrush designs using a laboratory stained pellicle test with seven different dentifrices. The toothbrushes were a prototype powered toothbrush (Crest SpinBrush Pro Whitening) and an ADA reference manual toothbrush, as a control. The dentifrices used in the study were: Crest Dual Action Whitening (Cool Mint), Crest Extra Whitening with Tartar Control (Clean Mint), Crest MultiCare Whitening (Fresh Mint), Colgate Total, Colgate Total Plus Whitening, Arm & Hammer Advance White with Tartar Control and Rembrandt Plus with Active Dental Peroxide. This was a randomized, parallel group study that examined stain removal with a novel toothbrushing configuration adapted for powered and manual toothbrushes. Stain was scored before and after brushing for two consecutive, 1-minute periods using digital image analysis. The mean change in L* was statistically compared between toothbrushes with ANCOVA. Labial enamel specimens were obtained from bovine permanent incisors and these specimens were subjected to a laboratory staining process until the L* values for the samples were in the range of 35-45. Digital images for CIE L*a*b* analysis were captured using a high-resolution digital camera under standard polarized lighting conditions. Based on the L* values, the enamel specimens were divided into 14 groups of nine specimens each. Baseline L* values ranged from 40.62 to 41.38 for the 14 toothbrush/dentifrice combinations. The change in L* (post-brushing minus baseline), denoted as deltaL*, was calculated for each specimen and the resulting data were subjected to a two-way ANCOVA. Toothbrush type and dentifrice type were the two terms in the model, and baseline L* was the covariate. Pairwise tests were performed on the adjusted means in order to compare the stain removal efficacy of the two toothbrushes for each of the seven dentifrices evaluated. The powered toothbrush resulted in statistically significantly greater deltaL* values (all P < or = 0.006) than the manual toothbrush for every dentifrice tested. The deltaL* values for dentifrices used with the powered toothbrush were from 66.0-164.2% higher than for the same dentifrice used with the manual toothbrush.

Brushing force of manual and sonic toothbrushes affects dental hard tissue abrasion.

PubMed

Wiegand, Annette; Burkhard, John Patrik Matthias; Eggmann, Florin; Attin, Thomas

2013-04-01

This study aimed to determine the brushing forces applied during in vivo toothbrushing with manual and sonic toothbrushes and to analyse the effect of these brushing forces on abrasion of sound and eroded enamel and dentin in vitro. Brushing forces of a manual and two sonic toothbrushes (low and high frequency mode) were measured in 27 adults before and after instruction of the respective brushing technique and statistically analysed by repeated measures analysis of variance (ANOVA). In the in vitro experiment, sound and eroded enamel and dentin specimens (each subgroup n = 12) were brushed in an automatic brushing machine with the respective brushing forces using a fluoridated toothpaste slurry. Abrasion was determined by profilometry and statistically analysed by one-way ANOVA. Average brushing force of the manual toothbrush (1.6 ± 0.3 N) was significantly higher than for the sonic toothbrushes (0.9 ± 0.2 N), which were not significantly different from each other. Brushing force prior and after instruction of the brushing technique was not significantly different. The manual toothbrush caused highest abrasion of sound and eroded dentin, but lowest on sound enamel. No significant differences were detected on eroded enamel. Brushing forces of manual and sonic toothbrushes are different and affect their abrasive capacity. Patients with severe tooth wear and exposed and/or eroded dentin surfaces should use sonic toothbrushes to reduce abrasion, while patients without tooth wear or with erosive lesions confining only to enamel do not benefit from sonic toothbrushes with regard to abrasion.

Comparison of the clinical effects of white brand toothbrushes versus Vitis Suave®

PubMed Central

Segarra-Vidal, Marta; Lucas-Alcahuz, Eduardo; López-Roldán, Andrés; Gil-Loscos, Francisco; Alpiste-Illueca, Francisco

2015-01-01

Background There has been an increase in the use of white label manual toothbrushes and a greater increase in inquiries for discomfort of the gingiva and mucosa. Material and Methods A randomized, double-blind, cross-over clinical trial was made of four white brand toothbrushes versus a control brush (Vitis Suave®), with the recording of plaque index, bleeding upon probing, and gingival abrasions following utilization of the different brushes. Results All the brushes except Deliplus® were equally effective in terms of plaque removal (p<0.05). Vitis Suave® and Veckia® were the brushes associated to the greatest increase in minor abrasions (p<0.01), while Veckia®, Carrefour® and Deluxe® significantly increased the number of medium intensity abrasions (p<0.05). These brushes also increased the number of large abrasions, though statistical significance was not reached in this case. Conclusions The white brand brushes proved effective in controlling bacterial plaque, but were associated to more intense soft tissue abrasion. Key words:Gingival abrasions, manual tooth brushing, white brand, clinical effects. PMID:26535095

Impact of brushing force on abrasion of acid-softened and sound enamel.

PubMed

Wiegand, A; Köwing, L; Attin, T

2007-11-01

The study aimed to analyse the effects of different brushing loads on abrasion of acid-softened and sound enamel surfaces. Sound and acid-softened surfaces of each 10 human enamel samples were submitted to brushing abrasion in an automatic brushing machine at 1.5 N (A), 2.5 N (B), 3.5 N (C) or 4.5 N (D) brushing load. Prior to abrasion, demineralisation of half of each enamel surface was performed by storage in hydrochloric acid (pH 2.0) for 60s. Brushing was carried out (1000 strokes) using a manual toothbrush and toothpaste slurry in a ratio of 1:3. Enamel loss was measured after 10, 20, 50, 100, 150, 200, 250, 300, 350 and 1000 brushing strokes (BS). Pre- and post-brushing values of Knoop indentation length (5 indentations each sample) were measured and mean enamel loss was calculated from the change in indentation depth. Within- and between-group comparisons were performed by ANOVA and t-test followed by Bonferroni-correction. Enamel loss of acid-softened surfaces was significantly influenced by the brushing load applied and was mostly significantly higher in group D (10-1000 BS: 225-462 nm) compared to A (10-1000 BS: 164-384), B (10-1000 BS: 175-370 nm) and C (10-1000 BS: 191-396 nm). Abrasion of acid-softened enamel was fourfold higher compared to sound surfaces. Sound enamel was significantly influenced by the brushing force at 20-200 brushing strokes only, but revealed no significant differences between groups A-D. Brushing load influences abrasion of briefly eroded enamel, but might be of minor importance for abrasion of sound enamel surfaces.

Fluoride availability in human saliva after dentifrice use: correlation with anticaries effects in rats.

PubMed

Afflitto, J; Schmid, R; Esposito, A; Toddywala, R; Gaffar, A

1992-04-01

Studies were conducted to determine fluoride availability in saliva after dentifrice use and to relate this parameter to cariostatic efficacy in rat caries experiments. Three dentifrices--two commercial formulations (Colgate Winterfresh Gel and Crest Dentifrice with Na-Sr-polyacrylate) and an Experimental dentifrice--were compared with respect to salivary fluoride availability. All of the dentifrices tested contained 1100 ppm F as sodium fluoride. It was observed that the Experimental dentifrice and Crest dentifrice with Sr-polyacrylate exhibited low salivary fluoride availability relative to the Colgate Winterfresh Gel. Salivary fluoride availability was assessed by means of two parameters: (a) the fluoride concentration in the dentifrice saliva slurry expectorated after brushing, and (b) the area under the curve of salivary F concentration vs. time for up to two hours after dentifrice use. In two rat caries experiments, it was observed that both the Experimental dentifrice and the Sr-polyacrylate dentifrice provided less cariostatic efficacy than the clinically validated Positive Control (Colgate Winterfesh Gel). Analysis of these data provides further evidence in support of the concept that fluoride availability in saliva following dentifrice use is an important parameter related to anticaries efficacy.

Effects of Dentifrice Containing Hydroxyapatite on Dentinal Tubule Occlusion and Aqueous Hexavalent Chromium Cations Sorption: A Preliminary Study

PubMed Central

Liu, Jing; Hou, Yarong; Zhu, Manqun; Huang, Jiansheng; Xu, Pingping

2012-01-01

In order to endow environmental protection features to dentifrice, hydroxyapatite (HA) was added to ordinary dentifrice. The effects on dentinal tubule occlusion and surface mineralization were compared after brushing dentine discs with dentifrice with or without HA. The two types of dentifrice were then added to 100 µg/ml of hexavalent chromium cation (Cr6+) solution in order to evaluate their capacities of adsorbing Cr6+ from water. Our results showed that the dentifrice containing HA was significantly better than the ordinary dentifrice in occluding the dentinal tubules with a plugging rate greater than 90%. Moreover, the effect of the HA dentifrice was persistent and energy-dispersive spectrometer (EDS) revealed that the atomic percentages of calcium and phosphorus on the surface of dentine discs increased significantly. Adding HA to ordinary dentifrice significantly enhanced the ability of dentifrice to adsorb Cr6+ from water with the removal rate up to 52.36%. In addition, the sorption was stable. Our study suggests that HA can be added to ordinary dentifrice to obtain dentifrice that has both relieving dentin hypersensitivity benefits and also helps to control environmental pollution. PMID:23300511

EFFECT OF A DENTIFRICE CONTAINING ALOE VERA ON PLAQUE AND GINGIVITIS CONTROL. A DOUBLE-BLIND CLINICAL STUDY IN HUMANS

PubMed Central

de Oliveira, Sílvia Morgana Araújo; Torres, Ticiana Carneiro; Pereira, Sérgio Luís da Silva; Mota, Olívia Morais de Lima; Carlos, Márlio Ximenes

2008-01-01

The effect of Aloe vera on the reduction of plaque and gingivitis was evaluated in a randomized, parallel and double-blind clinical trial. Subjects were randomly allocated to the test group (n=15) – dentifrice containing Aloe vera - or the control group (n=15) – fluoridated dentifrice. Plaque index (PI) and gingival bleeding index (GBI) were assessed at days 0 and 30. Subjects were asked to brush their teeth with the control or test dentifrice, three times a day, during a 30-day period. There was a significant reduction on plaque and gingivitis in both groups, but no statistically significant difference was observed among them (p>0.01). The dentifrice containing Aloe vera did not show any additional effect on plaque and gingivitis control compared to the fluoridated dentifrice. PMID:19089263

Effect of a dentifrice containing Aloe vera on plaque and gingivitis control. A double-blind clinical study in humans.

PubMed

de Oliveira, Sílvia Morgana Araújo; Torres, Ticiana Carneiro; Pereira, Sérgio Luís da Silva; Mota, Olívia Morais de Lima; Carlos, Márlio Ximenes

2008-01-01

The effect of Aloe vera on the reduction of plaque and gingivitis was evaluated in a randomized, parallel and double-blind clinical trial. Subjects were randomly allocated to the test group (n=15) - dentifrice containing Aloe vera - or the control group (n=15) - fluoridated dentifrice. Plaque index (PI) and gingival bleeding index (GBI) were assessed at days 0 and 30. Subjects were asked to brush their teeth with the control or test dentifrice, three times a day, during a 30-day period. There was a significant reduction on plaque and gingivitis in both groups, but no statistically significant difference was observed among them (p>0.01). The dentifrice containing Aloe vera did not show any additional effect on plaque and gingivitis control compared to the fluoridated dentifrice.

Restorative therapy for erosive lesions.

PubMed

Lambrechts, P; Van Meerbeek, B; Perdigão, J; Gladys, S; Braem, M; Vanherle, G

1996-04-01

More needs to be learned about the etiology of erosion lesions before they can be accurately diagnosed, confidently treated and, more importantly, prevented. The treatment is dependent on the location and the degree of erosion. The decision to treat an erosion lesion should be based on careful consideration of the etiology and progression of the condition. Reasons for restoring noncarious enamel/dentin lesions are discussed and various therapeutic measures are provided. Preventive and restorative therapeutic measures for noncarious abrasive/ erosive lesions are proposed such as: a change of dietary or behavior patterns; application of desensitization products; intensive fluoride therapy with or without iontophoresis; brushing with desensitizing dentifrices; adhesive penetration with dentin bonding agents; glass ionomers and compomers; resin composites; composite or porcelain veneers; crown and bridge work; occlusal adjustments and nightguard fabrication if the abfraction factor coincides. The clinical durability of restorative therapy and important clinical factors related to the restoration of multifactorial defects are discussed.

Interproximal plaque mass and fluoride retention after brushing and flossing--a comparative study of powered toothbrushing, manual toothbrushing and flossing.

PubMed

Sjögren, Karin; Lundberg, Ann-Britt; Birkhed, Dowen; Dudgeon, Douglas J; Johnson, Matthew R

2004-01-01

To determine differences in interproximal plaque mass and fluoride retention with different modes of toothbrushing and flossing. Forty-seven subjects in good health used four treatments in a four-period, randomized, crossover design: 1) manual brushing only; 2) manual brushing and daily flossing; 3) electric brushing using a rotational oscillation toothbrush; and 4) electric brushing using a sonic toothbrush. Subjects used a standard sodium fluoride dentifrice during the eight-day experimental periods and a fluoride-free dentifrice during the seven-day washout periods between treatments. Interproximal plaque samples were taken on Day 1 and on Day 8, weighed, and analyzed for fluoride content. The amount of interproximal plaque was lowest with sonic brushing, which left 43-65% less plaque than all other treatments. Manual brushing and flossing yielded less plaque than manual brushing alone and rotational oscillation brushing. Differences were statistically significant (p < 0.05) for treatment; there was no time effect on plaque mass. For fluoride retention, at Day 1 sonic brushing gave at least 54% more fluoride in the interproximal plaque than all other treatments, which was significant. All treatments demonstrated a significant increase in fluoride concentration with time except manual brushing and flossing, which showed a significant decrease. At Day 8, the fluoride concentration was significantly higher for sonic brushing than for manual brushing or rotational oscillation brushing by over 40%, and all treatments exhibited significantly greater fluoride than the manual brushing and flossing combination. The mode of toothbrushing may impact the amount of plaque retained interproximally and its fluoride concentration.

Effect of baking soda in dentifrices on plaque removal.

PubMed

Myneni, Srinivas R

2017-11-01

The prevention of dental caries and periodontal diseases targets control of dental plaque biofilm. In this context, chemical agents could represent a valuable complement to mechanical plaque control by reducing and controlling biofilm formation. The literature on the effectiveness of different dentifrices has not, however, been carefully categorized. A lack of consensus exists among dental professionals on a recommendation for a universal dentifrice for plaque control. The authors reviewed the scientific data on the different properties of sodium bicarbonate (baking soda)-containing dentifrices and their effectiveness in plaque removal. The results of the literature search show that baking soda-containing dentifrices are ideal candidates to be considered as a universal dentifrice because baking soda is inexpensive, abundant in supply, highly biocompatible, exhibits specific antibacterial properties to oral microorganisms, has low abrasivity, and is effective in plaque biofilm removal. Although some patients may benefit from desensitizing or high fluoride-containing dentifrices, those with routine needs may find using dentifrices containing baking soda and fluoride effective. Baking soda and fluoride dentifrices, therefore, may perhaps be considered as a criterion standard for patients with routine oral hygiene needs. Copyright © 2017 American Dental Association. Published by Elsevier Inc. All rights reserved.

Gingival abrasion and recession in manual and oscillating-rotating power brush users.

PubMed

Rosema, N A M; Adam, R; Grender, J M; Van der Sluijs, E; Supranoto, S C; Van der Weijden, G A

2014-11-01

To assess gingival recession (GR) in manual and power toothbrush users and evaluate the relationship between GR and gingival abrasion scores (GA). This was an observational (cross-sectional), single-centre, examiner-blind study involving a single-brushing exercise, with 181 young adult participants: 90 manual brush users and 91 oscillating-rotating power brush users. Participants were assessed for GR and GA as primary response variables. Secondary response variables were the level of gingival inflammation, plaque score reduction and brushing duration. Pearson correlation was used to describe the relationship between number of recession sites and number of abrasions. Prebrushing (baseline) and post-brushing GA and plaque scores were assessed and differences analysed using paired tests. Two-sample t-test was used to analyse group differences; ancova was used for analyses of post-brushing changes with baseline as covariate. Overall, 97.8% of the study population had at least one site of ≥1 mm of gingival recession. For the manual group, this percentage was 98.9%, and for the power group, this percentage was 96.7% (P = 0.621). Post-brushing, the power group showed a significantly smaller GA increase than the manual group (P = 0.004); however, there was no significant correlation between number of recession sites and number of abrasions for either group (P ≥ 0.327). Little gingival recession was observed in either toothbrush user group; the observed GR levels were comparable. Lower post-brushing gingival abrasion levels were seen in the power group. There was no correlation between gingival abrasion as a result of brushing and the observed gingival recession following use of either toothbrush. © 2014 The Authors International Journal of Dental Hygiene Published by John Wiley & Sons Ltd.

Gingival abrasion and recession in manual and oscillating–rotating power brush users

PubMed Central

Rosema, NAM; Adam, R; Grender, JM; Van der Sluijs, E; Supranoto, SC; Van der Weijden, GA

2014-01-01

Objective To assess gingival recession (GR) in manual and power toothbrush users and evaluate the relationship between GR and gingival abrasion scores (GA). Methods This was an observational (cross-sectional), single-centre, examiner-blind study involving a single-brushing exercise, with 181 young adult participants: 90 manual brush users and 91 oscillating–rotating power brush users. Participants were assessed for GR and GA as primary response variables. Secondary response variables were the level of gingival inflammation, plaque score reduction and brushing duration. Pearson correlation was used to describe the relationship between number of recession sites and number of abrasions. Prebrushing (baseline) and post-brushing GA and plaque scores were assessed and differences analysed using paired tests. Two-sample t-test was used to analyse group differences; ancova was used for analyses of post-brushing changes with baseline as covariate. Results Overall, 97.8% of the study population had at least one site of ≥1 mm of gingival recession. For the manual group, this percentage was 98.9%, and for the power group, this percentage was 96.7% (P = 0.621). Post-brushing, the power group showed a significantly smaller GA increase than the manual group (P = 0.004); however, there was no significant correlation between number of recession sites and number of abrasions for either group (P ≥ 0.327). Conclusions Little gingival recession was observed in either toothbrush user group; the observed GR levels were comparable. Lower post-brushing gingival abrasion levels were seen in the power group. There was no correlation between gingival abrasion as a result of brushing and the observed gingival recession following use of either toothbrush. PMID:24871587

Scanning electron microscopy study of the effect of the brushing time on the human tooth dentin after exposure to acidic softdrinks.

PubMed

Kwoni, Eri; Choi, Samjin; Cheong, Youjin; Park, Ki-Ho; Park, Hun-Kuk

2012-07-01

Scanning electron microscopy (SEM) was used to examine the abrasive and erosive potential of the brushing time on the dentin surface eroded by acidic soft drinks to suggest an optimized toothbrushing start time after the consumption of cola (pH 2.52) in children. Thirty-six non-carious primary central incisors were assigned to 12 experimental groups (n = 3) based on the erosive and abrasive treatment protocols. Cola exposure was used as the erosive treatment. Three brushing durations (5, 15, and 30 sec) and four brushing start times (immediately, 30 min, 60 min, and 120 min) after an erosive pre-treatment were used for the abrasive treatment. Toothbrushing after exposure to acidic soft drinks led to an increase in the open-tubule fraction and microstructural changes. Toothbrushing immediately after the erosive pre-treatment showed the largest abrasive and erosive potential on the dentin whereas that 60 and 120 min after the pre-treatment showed the least abrasive and erosive potential on the dentin. Toothbrushing for both 60 and 120 min after the pre-treatment showed similar erosive and abrasive potentials on the dentin. The brushing duration showed no effect on the erosive and abrasive potential on the dentin. Therefore, to achieve the desired tooth surface cleaning and less surface lesion on the dentin surface, toothbrushing should be performed at least 1 hour after cola consumption. Three-minute brushing after cola consumption is sufficient to prevent dental lesions, and prolonged brushing can irritate the gingival tissues.

Plaque formation and removal assessed in vivo in a novel repeated measures imaging methodology.

PubMed

White, Donald J; Kozak, Kathy M; Baker, Rob; Saletta, Lisa

2006-01-01

A repeated measures digital imaging technique (Digital Plaque Image Analysis) was used to assess variations in plaque formation, including levels of plaque developed following evening and morning tooth brushing with a standard dentifrice, to establish a baseline for future assessments of antimicrobial formulations. Following a rigorous oral hygiene period, subjects were provided with a standard commercial (non-antibacterial) dentifrice and manual toothbrush and instructed to brush b.i.d., as normal. On six separate days over two weeks, subjects reported at three times for a daily plaque assessment: in the morning before oral hygiene, post-brushing, and in the afternoon post-brushing. Morning plaque levels covered approximately 10% of the measured dentition, and plaque was removed by 75% with morning tooth brushing. Plaque underwent rapid regrowth during the day, and averaged approximately 7% coverage by the afternoon. These results support the value of Digital Plaque Image Analysis in recording diurnal plaque variations and treatment effects, and suggest that assessment of oral hygiene efficacy (either mechanical or chemopreventive) accounts for diurnal variations in plaque formation. In addition, the results suggest that plaque regrowth and virulence activity overnight is a significant target for oral hygiene interventions.

Abrasive Wear of Four Direct Restorative Materials by Standard and Whitening Dentifrices

DTIC Science & Technology

2013-06-01

after an acidic challenge . Enamel loss was significantly greater when erosive and abrasive effects were combined. They concluded that acid-softened...surrounding soft tissues. Another benefit of restoration is the elimination of a challenging area for the patient and hygienist to clean. These areas...abrasion challenge ; the resin cement with the smallest sized filler particles had the smallest weight loss and maintained the smoothest surface of all the

Complete denture biofilm after brushing with specific denture paste, neutral soap and artificial saliva.

PubMed

Paranhos, Helena de Freitas Oliveira; Salles, Antônio Eduardo Sparça; Macedo, Leandro Dorigan de; Silva-Lovato, Cláudia Helena da; Pagnano, Valéria Oliveira; Watanabe, Evandro

2013-01-01

This study compared the levels of biofilm in maxillary and mandibular complete dentures and evaluated the number of colony-forming units (cfu) of yeasts, after using auxiliary brushing agents and artificial saliva. Twenty-three denture wearers with hyposalivation and xerostomia were instructed to brush the dentures 3 times a day during 3 weeks with the following products: Corega Brite denture dentifrice, neutral liquid soap, Corega Brite combined with Oral Balance (artificial saliva) or tap water. For biofilm quantification, the internal surfaces of the dentures were disclosed, photographed and measured using a software. For microbiological analysis, the biofilm was scrapped off, and the harvested material was diluted, sown in CHROMagar™ Candida and incubated at 37°C for 48 h. Data were analyzed statistically by two-way ANOVA and Tukey's test (α=0.05). Mandibular dentures presented a mean biofilm percentage (µ=26.90 ± 21.10) significantly greater than the maxillary ones (µ=18.0 ± 15.0) (p<0.05). Brushing using Corega Brite combined with Oral Balance (µ=15.87 ± 18.47) was more effective (p<0.05) than using the denture dentifrice (µ=19.47 ± 17.24), neutral soap (µ=23.90 ± 18.63) or tap water (control; µ=32.50 ± 20.68). For the microbiological analysis, the chi-square test did not indicate significant difference between the hygiene products for either type of denture. The more frequently isolated species of yeasts were C. albicans, C. tropicalis and C. glabrata. In conclusion, mandibular dentures had more biofilm formation than maxillary ones. Denture brushing with Corega Brite dentifrice combined with the use of Oral Balance was the most effective method for reduction of biofilm levels, but the use of products did not show difference in yeast cfu counts.

[Brushing abrasion of the enamel surface after erosion].

PubMed

Lipei, Chen; Xiangke, Ci; Xiaoyan, Ou

2017-08-01

Objective A study was conducted to compare the effect of different enamel remineralization periods after erosion on the depth of brushing abrasion. Methods Ten volunteers were selected for a 4-day experiment. A total of 60 enamels were randomly assigned into six groups (A-F) and placed in intraoral palatal devices. On the first day, the palatal devices were placed in oral cavity (24 h) . On the following three days, brushing experiments were performed extraorally, two times per day. The specific experimental method of brushing follows these next steps. First, the group F specimens were covered with a film of wax, and then acid etched for 2 min. Subsequently, the film of wax was detached. The groups from A to D were brushed after remineralization at the following time intervals: group A, 0 min; group B, 20 min; group C, 40 min; group D, 60 min. Erosion and remineralization were performed on group E, but without brushing. Remineralization was performed on group F, but without acid etching and brushing. The depth of enamel abrasion was determined by a mechanical profilometer. The surface morphology of the enamel blocks was observed using a scanning electron microscope. Results 1) The depth of abrasion was different in varied enamel remineralization time after acid etching. The statistical significant differences between groups were as follows. 2) When the time of enamel remineralization after acid etching was short, the surface depression in the electron microscope was deep, and the surface morphology was rough. Conclusion Brushing immediately after acid etching would cause much serious abrasion to the enamel surface. Brushing after 60 min can effectively reduce the abrasion of acid etching enamel.

Effects of Bleaching Agents Combined with Regular and Whitening Toothpastes on Surface Roughness and Mineral Content of Enamel.

PubMed

Attia, Mariana Lerner; Cavalli, Vanessa; do Espírito Santo, Ana Maria; Martin, Airton Abrahão; D'Arce, Maria Beatriz Freitas; Aguiar, Flávio Henrique Baggio; Lovadino, José Roberto; do Rego, Marcos Augusto; Cavalcanti, Andréa Nóbrega; Liporoni, Priscila Christiane Suzy

2015-07-01

The purpose of this study was to evaluate surface roughness and changes in the composition of enamel submitted to different bleaching protocols and toothbrushing with regular and whitening toothpastes. Bleaching treatment could promote morphological and chemical changes in enamel surface. Enamel blocks were randomized into nine groups (n=10) according to the bleaching treatment (no bleaching, control group; 6% hydrogen peroxide, HP; or 10% carbamide peroxide, CP) and toothpaste used (placebo, PL; regular, R; or whitening dentifrice, W). Bleaching was performed according to manufacturers' instructions and all groups were submitted to 30,000 cycles of simulated toothbrushing with toothpaste (PL, R, or W). Mineral content evaluation and enamel roughness were evaluated initially (T1), after bleaching (T2), and after toothbrushing (T3), using an energy-dispersive micro X-ray fluorescence spectrometer and profilometry, respectively. Data were statistically analyzed with two way ANOVA, Tukey, and Dunnett tests (5%). Enamel surface roughness was influenced by bleaching and toothbrushing. Surface roughness increased for the groups that brushed with the placebo dentifrice (CP+PL, HP+PL, C+PL) and for the control group that brushed with whitening dentifrice (C+W). Enamel Ca/P ratio decreased after bleaching, but toothbrushing, regardless of the dentifrice used, did not reduce the enamel mineral content. The bleaching treatment resulted in a decrease of enamel mineral content, but the studied dentifrices did not contribute to surface mineral loss.

Comparative Efficacy of a Soft Toothbrush with Tapered-tip Bristles to an ADA Reference Toothbrush on Gingival Abrasion over a 12-Week Period.

PubMed

Gallob, John; Petrone, Dolores M; Mateo, Luis R; Chaknis, Patricia; Morrison, Boyce M; Panagakos, Foti; Williams, Malcolm

2016-06-01

Evaluation of the impact of a soft toothbrush with tapered-tip (Test Toothbrush) bristles and an ADA reference toothbrush (ADA Toothbrush) on gingival abrasion over a 12-week period. This was a randomized, single-center, examiner-blind, two-cell, parallel clinical research study and used the Danser Gingival Abrasion Index to assess the level of gingival abrasion after a single brushing, as well as after six weeks and 12 weeks of twice-daily brushing. Adult male and female subjects from the Central New Jersey, USA area refrained from all oral hygiene procedures for 24 hours. They reported to the study site after refraining from eating, drinking, and smoking for four hours. Following a qualifying examination using plaque and gingivitis scores along with a baseline gingival abrasion examination, subjects were randomized into two balanced groups, each group using one of the two study toothbrushes. Subjects were instructed to brush their teeth for one minute, under supervision, with their assigned toothbrush and a commercially available fluoride toothpaste (Colgate© Cavity Protection Toothpaste), after which they were again evaluated for gingival abrasion. Subjects were dismissed from the study site with their assigned toothbrush and toothpaste, and instructed to brush twice daily at home for the next 12 weeks. The subjects were instructed to brush for one minute during each tooth brushing. The subjects reported to the study site after six weeks and 12 weeks of product use, at which time they were evaluated for gingival abrasion. Seventy-one (71) subjects complied with the protocol and completed the clinical study. The results of this study showed that the Test Toothbrush provided statistically significantly (p < 0.05) greater reductions in gingival abrasion scores as compared to the gingival abrasion scores of the ADA Toothbrush after a single tooth brushing, after six weeks, and after 12 weeks of product use (75.0%, 85.5%, 73.9%, respectively). The soft toothbrush with tapered-tip bristles produced significantly less gingival abrasion after 12 weeks of product use as compared to the ADA reference toothbrush.

Evaluation of different fluoridated dentifrice formulations using an in situ erosion remineralization model.

PubMed

Barlow, A P; Sufi, F; Mason, S C

2009-01-01

The objective of these three clinical in situ studies was to investigate the relative performance of commercially available and experimental dentifrice formulations, having different fluoride sources and excipient ingredients, at remineralizing a bovine enamel surface previously softened by a dietary acid challenge. Each study utilized the same randomized, placebo-controlled, single-blind, crossover design. Subjects undertook single brushings of their natural teeth, with an in situ appliance in place, using different dentifrices in a randomly assigned order. Study A involved 58 subjects with the following dentifrices: Sensodyne Pronamel (1450 ppm F as NaF/5% KNO3); Blend-a-Med Classic (1450 ppm F as NaF); and a matched (Pronamel) placebo control (0 ppm F). Study B involved 56 subjects with the following dentifrices: Sensodyne Pronamel (1150 ppm F as NaF/5% KNO3); Crest Cavity Protection (1100 ppm F as NaF); Crest Pro-Health (0.454% SnF2 [1100 ppm F]/sodium hexametaphosphate); and a matched (Pronamel) placebo control (0 ppm F). Study C involved 56 subjects with the following dentifrices: Sensodyne Pronamel (1150 ppm F as NaF/5% KNO3); Sensodyne Pronamel Gentle Whitening (1150 ppm F as NaF/5% KNO3); Colgate Sensitive Multi Protection (1000 ppm F as NaMFP/5.53% potassium citrate/2% zinc citrate); and a matched (Pronamel) placebo control (0 ppm F). Subjects wore their palatal appliances holding eight bovine enamel blocks, previously exposed for 25 minutes to an in vitro erosive challenge with grapefruit juice, for the duration of the experiment. Five minutes after appliance insertion, subjects undertook a supervised, 90-second brush/rinse regimen with their assigned dentifrice. Surface microhardness (SMH) of the specimens was determined prior to the erosive challenge (baseline), after the in vitro erosive challenge, and were remeasured after four hours in situ remineralization following the tooth brushing event. Finally, SMH values were determined after a second in vitro erosive challenge at the end of the in situ remineralization period. Statistical analyses included ANOVA and pair-wise comparisons between treatments, testing at a 5% significance level. All three studies demonstrated significantly greater percent surface microhardness recovery (% SMHr) and percent relative erosion resistance (% RER) for dentifrices containing sodium fluoride compared to placebo controls. Overall, significantly greater % SMHr (p < 0.0001) was observed for Sensodyne Pronamel compared to Blend-a-Med Classic, Crest Pro-Health, and Colgate Sensitive Multi Protection dentifrices. Similarly, Sensodyne Pronamel delivered directionally better % RER vs. Blend-a-Med Classic (p = 0.0731), and significantly higher % RER vs. Crest Pro-Health (p = 0.0074) and Colgate Sensitive Multi Protection (p <0.0001). Crest Cavity Protection demonstrated significantly better % RER (p = 0.031) than Crest Pro-Health, which in turn demonstrated significantly better % RER than the placebo control (p < 0.0001). No other statistically significant between-product comparisons were observed. The results of these in situ studies support the effectiveness of dentifrices containing sodium fluoride to reharden enamel previously softened with an erosive challenge. Furthermore, these studies demonstrate the protective effects conferred to enamel, from erosion following the remineralization process in the presence of "ionic" fluoride. Under clinically relevant conditions, Sensodyne Pronamel and Sensodyne Pronamel Gentle Whitening offered superior anti-erosion performance compared to currently marketed dentifrice controls. These studies reinforce previous research indicating the importance of formulation effects on the relative remineralization performance of dentifrices under erosive conditions.

Effectiveness of a baking soda toothpaste delivering calcium and phosphate in reducing dentinal hypersensitivity.

PubMed

Ghassemi, A; Hooper, W; Winston, A E; Sowinski, J; Bowman, J; Sharma, N

2009-01-01

The purpose of this controlled clinical trial was to determine the effectiveness and safety of a single-phase dentifrice that delivers calcium, phosphate, and fluoride to the tooth surface (Arm & Hammer Enamel Care for Sensitive Teeth toothpaste, United Kingdom) in reducing dentinal hypersensitivity. Two-hundred and eight qualifying subjects were randomly assigned to either the Enamel Care dentifrice group or a control dentifrice group, and brushed twice daily with their assigned dentifrice for eight weeks. Pain/discomfort in response to a thermal stimulus was assessed at baseline, week 4, and week 8 using a Visual Analogue Scale (VAS; primary outcome variable) and the Schiff Thermal Sensitivity Scale (STSS; secondary outcome variable). After eight weeks, volunteers from the Enamel Care group were switched to the control dentifrice and participated in a second eight-week study to determine the degree of persistence of pain reduction. Both groups had statistically significant VAS score reductions from baseline at weeks 4 and 8, with mean VAS scores in the Enamel Care group decreasing by 45.6% at week 4 and 61.1% at week 8 (p < 0.0001). Enamel Care was statistically significantly more effective than the control at weeks 4 and 8, with respective mean VAS reductions of 63% (p < 0.0001) and 33% (p = 0.0004) greater than the control. Consistent with the VAS score results, the Enamel Care group had respective statistically significant STSS score reductions of 77% and 58% greater than the control group (p < 0.0001). The reductions in dentinal hypersensitivity seen in the Enamel Care group at week 8 persisted for an additional eight weeks, during which the subjects discontinued use of Enamel Care and brushed with the control dentifrice. Enamel Care for Sensitive Teeth toothpaste (United Kingdom) is an effective dentifrice for the management of dentinal hypersensitivity, and its efficacy persists for a least eight weeks following discontinued product use.

A Comparative Evaluation of the Efficacy of Two Novel Desensitising Dentifrices

PubMed Central

Barlow, Ashley P.; He, Jane; Tian, Cindy; Jeffery, Peter; Mason, Stephen C.; Tai, Bao-Jun; Jiang, Han; Rees, Gareth D.; Du, Min Quan

2012-01-01

A comparison of the desensitising efficacy of two commercially available dentifrices with different modes of action was conducted in a randomised, examiner-blind, two-arm, parallel group, 8-week, longitudinal clinical study. Dentifrice A, (Sensodyne Multi Action Iso-Active), contained 50000 ppm KNO3 and 1450 ppm fluoride as NaF. Dentifrice B, Colgate Sensitive Pro-Relief, contained a combination of 80000 ppm arginine, bicarbonate, calcium carbonate, and 1450 ppm fluorine as NaMFP. Subjects (N = 110), stratified into two groups (N = 55), brushed twice-daily for 60 s, over an 8-week period. Sensitivity status, compliance, and safety were determined at 1, 2, 4, and 8 weeks. A fixed-effects ANCOVA statistical model was applied to the Intent-To-Treat population using a two-sided 5% significance level. After 8 weeks, the treatment groups using Dentifrice A and Dentifrice B exhibited mean reductions from baseline of 49% and 45% in air sensitivity visual analogue scale (VAS) score, 61% (both) in examiner-based Schiff Sensitivity score, and clinically significant reductions in tactile pain threshold; all reductions were statistically significant (P < 0.0001). Both treatment groups also exhibited significant reductions across all sensitivity measures at 1, 2, and 4 weeks (P ≤ 0.0059, Dentifrice A; P ≤ 0.0137, Dentifrice B). PMID:23304149

A comparative evaluation of the efficacy of two novel desensitising dentifrices.

PubMed

Barlow, Ashley P; He, Jane; Tian, Cindy; Jeffery, Peter; Mason, Stephen C; Tai, Bao-Jun; Jiang, Han; Rees, Gareth D; Du, Min Quan

2012-01-01

A comparison of the desensitising efficacy of two commercially available dentifrices with different modes of action was conducted in a randomised, examiner-blind, two-arm, parallel group, 8-week, longitudinal clinical study. Dentifrice A, (Sensodyne Multi Action Iso-Active), contained 50000 ppm KNO(3) and 1450 ppm fluoride as NaF. Dentifrice B, Colgate Sensitive Pro-Relief, contained a combination of 80000 ppm arginine, bicarbonate, calcium carbonate, and 1450 ppm fluorine as NaMFP. Subjects (N = 110), stratified into two groups (N = 55), brushed twice-daily for 60 s, over an 8-week period. Sensitivity status, compliance, and safety were determined at 1, 2, 4, and 8 weeks. A fixed-effects ANCOVA statistical model was applied to the Intent-To-Treat population using a two-sided 5% significance level. After 8 weeks, the treatment groups using Dentifrice A and Dentifrice B exhibited mean reductions from baseline of 49% and 45% in air sensitivity visual analogue scale (VAS) score, 61% (both) in examiner-based Schiff Sensitivity score, and clinically significant reductions in tactile pain threshold; all reductions were statistically significant (P < 0.0001). Both treatment groups also exhibited significant reductions across all sensitivity measures at 1, 2, and 4 weeks (P ≤ 0.0059, Dentifrice A; P ≤ 0.0137, Dentifrice B).

The importance of measuring toothpaste abrasivity in both a quantitative and qualitative way.

PubMed

Johannsen, Gunnar; Tellefsen, Georg; Johannsen, Annsofi; Liljeborg, Anders

2013-01-01

To evaluate the relative abrasivity of different toothpastes and polishing pastes both qualitatively and quantitatively. Acrylic plates were exposed to brushing in a brushing machine with a toothpaste/water slurry for 1 and 6 h. Twelve different toothpastes were used and also four different polishing pastes. The results were evaluated using a profilometer after 1 and 6 h of brushing (corresponding to 2000 and 12 000 double strokes, respectively). A surface roughness value (Ra-value) and also a volume loss value were calculated from the profilometer measurements. These values were then correlated to each other. An unpaired t-test for the difference in the abrasion values between the toothpastes and the abrasion values over time was used. The polishing paste RDA® 170 yielded higher Ra-values than RDA 250®, both after 1 and 6 h of brushing (1.01 ± 0.22 and 8.99 ± 1.55 compared to 0.63 ± 0.26 and 7.83 ± 5.89, respectively) as well as volume loss values (3.71 ± 0.17 and 20.20 ± 2.41 compared to 2.15 ± 1.41 and 14.79 ± 11.76, respectively), thus poor correlations between the RDA and Ra and Volume loss values were shown. Among the toothpastes, Apotekets® showed the highest Ra value after 1 h of brushing and Pepsodent® whitening after 6 h of brushing. Pepsodent® whitening also showed the highest volume loss values, both after 1 and 6 h of brushing. This study emphasizes the importance of not only considering the RDA value, but also a roughness value, when describing the abrasivity of a toothpaste. Furthermore, it can be concluded that so called 'whitening' toothpastes do not necessarily have a higher abrasive effect than other toothpastes.

Supragingival calculus in children with gastrostomy feeding: significant reduction with a caregiver-applied tartar-control dentifrice.

PubMed

Brown, Laurie M; Casamassimo, Paul S; Griffen, Ann; Tatakis, Dimitris

2006-01-01

This study assessed the anti-calculus benefit of Crest Dual Action Whitening Toothpaste in gastrostomy (GT) children compared to a control anti-caries dentifrice. A double-blind randomized crossover design was used to compare the two dentifrices. A convenience sample of 24 GT subjects, 3-12 years old, was given a consensus baseline Volpe-Manhold Index calculus score by 2 trained examiners, followed by a dental prophylaxis to remove all calculus. Each child was randomly assigned to either study or control dentifrice groups. Caregivers brushed subjects' teeth twice daily with the unlabelled dentifrice for at least 45 seconds. Calculus was scored at 8 weeks (+/- 1 week) by the same investigators. Subjects then had a prophylaxis and received the alternative dentifrice. Subjects returned 8 weeks (+/- 1 week) later for final calculus scoring. The study dentifrice significantly reduced supragingival calculus from baseline by 58% compared to control dentifrice (p<0.005 need exact p-value unless it is <.001; maybe it's reported in the paper). Calculus levels decreased by 68% over the study duration, irrespective of dentifrice. ANOVA found no significant differences in calculus scores based on gender, race, history of reflux, aspiration pneumonia, or oral intake of food. Calculus was significantly related to history of aspiration pneumonia (p<0.05 need exact p-value here). Crest Dual Action Whitening Toothpaste was effective and better than anti-caries control dentifrice in reducing calculus in GT children.

Calcium release rates from tooth enamel treated with dentifrices containing whitening agents and abrasives.

PubMed

Araujo, Danilo Barral; Silva, Luciana Rodrigues; de Araujo, Roberto Paulo Correia

2010-01-01

Tooth whitening agents containing hydrogen peroxide and carbamide peroxide are used frequently in esthetic dental procedures. However, lesions on the enamel surface have been attributed to the action of these products. Using conventional procedures for separating and isolating biological structures, powdered enamel was obtained and treated with hydrogen peroxide, carbamide peroxide, and sodium bicarbonate, ingredients typically found in dentifrices. The enamel was exposed to different pH levels, and atomic emission spectrometry was used to determine calcium release rates. As the pH level increased, the rate of calcium release from enamel treated with dentifrices containing whitening agents decreased. Carbamide peroxide produced the lowest amount of decalcification, while sodium bicarbonate produced the highest release rates at all pH levels.

Effects of short-term immersion and brushing with different denture cleansers on the roughness, hardness, and color of two types of acrylic resin.

PubMed

Panariello, Beatriz Helena Dias; Izumida, Fernanda Emiko; Moffa, Eduardo Buozi; Pavarina, Ana Claudia; Jorge, Janaina Habib; Giampaolo, Eunice Teresinha

2015-06-01

To investigate the cumulative effects of brushing (B) or immersion (I), using different cleansing agents, on the surface roughness, hardness and color stability of a heat-polymerized denture resin, Lucitone 550 (L), and a hard chairside reline resin, Tokuyama Rebase Fast II (T). A total of 316 specimens (10 x 2 mm) were fabricated. The specimens (n = 9) were divided into brushing or immersion groups according to the following agents: dentifrice/distilled water (D), 1% sodium hypochlorite (NaOCl), Corega Tabs (Pb), 1% chlorhexidine gluconate (Chx), and 0.2% peracetic acid (Ac). Brushing and immersion were tested independently. Assays were performed after 1, 3, 21, 45 and 90 brushing cycles or immersion of 10 seconds each. Data were evaluated statistically by repeated measures ANOVA. Tukey's honestly significant difference (HSD) post-hoc test was used to determine differences between means (α = 0.05). For L there was no statistically significant difference in roughness, except a significant decrease in roughness by brushing with D. T showed a significant effect on the roughness after 90 immersions with Ac. Hardness values decreased for L when specimens were immersed or brushed in NaOCl and Pb. The hardness of T decreased with increases in the repetitions (immersion or brushing), regardless of the cleaning method. Values of color stability for L resin showed significant color change after brushing with and immersion in Ac and Pb. Brushing with D exhibited a higher incidence of color change. For T there were no significant differences between cleaning agents and repetitions in immersion. A color change was noted after three brushings with the Ac, Chx, and D. Brushing with dentifrice decreased roughness of L. Immersion in or brushing with NaOCl and Pb decreased the hardness of L. For T, hardness decreased with increases in immersions or brushing. Color changes after the immersion in or brushing with cleaning agents were clinically acceptable according to National Bureau of Standards parameters for both resins.

Influence of different toothpaste abrasives on the bristle end-rounding quality of toothbrushes.

PubMed

de Oliveira, G J P L; de Aveiro, J M; Pavone, C; Marcantonio, R A C

2015-02-01

To evaluate the influence of different toothpaste abrasives on the bristle wear and bristle tip morphology of toothbrushes with different degrees of hardness. Ninety samples of bovine incisor teeth were used in this study. The samples were randomly divided into three groups according to the bristle hardness of the toothbrush used: soft bristles (S); extra-soft bristles (ES); hard bristles (H). The toothbrushes of each group were randomly divided into six subgroups with five toothbrushes each, according to the abrasive of the toothpaste used in the simulation: Negative control (distilled water); toothpaste 1 (silica); toothpaste 2 (hydrated silica); toothpaste 3 (calcium carbonate, calcium bicarbonate and silica); toothpaste 4 (tetrapotassium pyrophosphate, silica and titanium dioxide); toothpaste 5 (calcium carbonate). The samples were placed in a toothbrushing simulating machine that simulating three months of brushing. The toothbrush bristles were evaluated by the bristle wear index, and the bristle tips morphology was evaluated by the bristle tip morphology index. The ES brush presented the highest bristle wear among the toothbrushes. Additionally, the S brushes showed better morphology of the bristles followed by ES and H brushes. The type of abrasive only influenced the bristle tip morphology of the ES brushes. The toothpaste 3 induced the worse bristle tip morphology than all the other toothpastes. Different abrasives have influence only on the bristle tip morphology of the ES brushes. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Toothbrush abrasivity in a long-term simulation on human dentin depends on brushing mode and bristle arrangement.

PubMed

Bizhang, Mozhgan; Schmidt, Ilka; Chun, Yong-Hee Patricia; Arnold, Wolfgang H; Zimmer, Stefan

2017-01-01

The aim of this study was to evaluate the susceptibility of dentin to brushing abrasion using four different toothbrushes (rotating-oscillating, sonic and two types of manual toothbrushes) with the same brushing forces. Dentin samples (n = 72) were selected from 72 impacted third molars. Half of the surface of dentin samples was covered with an adhesive tape, creating a protected and a freely exposed area in the same specimen. Brushing was performed with either a: sonic (Sonicare PowerUp, Philips GmbH, Hamburg, Germany), b: oscillating-rotating (Oral B Vitality Precisions Clean, Procter & Gamble, Schwalbach am Taunus, Germany) or two different manual toothbrushes c: flat trim brush head toothbrush (Dr. Best: Original, Glaxo-Smith-Kline, Bühl, Germany) and d: rippled-shaped brush head toothbrush (Blend-a-Dent, Complete V-Interdental, Blend-a-med, Schwalbach, Germany) in a custom made automatic brushing machine. The brushing force was set to 2 N and a whitening toothpaste (RDA = 150) was used. The simulation period was performed over a calculated period to mimic a brushing behavior of two times a day brushing for eight years and six months. Dentin loss was quantitatively determined by profilometry and statistically analyzed by Wilcoxon and Mann-Whitney-U Test (p < 0.05). The mean (standard deviation) surface loss was 21.03 (±1.26) μm for the sonic toothbrush, 15.71 (±0.85) μm for the oscillating-rotating toothbrush, 6.13 (±1.24) μm for the manual toothbrush with flat trim brush head and 2.50 (±0.43) μm for the manual toothbrush with rippled-shaped brush head. Differences between all groups were statistically significant at p<0.05. Using the same brushing force and a highly abrasive toothpaste, manual toothbrushes are significantly less abrasive compared to power toothbrushes for an 8.5-year simulation.

Toothbrush abrasivity in a long-term simulation on human dentin depends on brushing mode and bristle arrangement

PubMed Central

2017-01-01

Objective The aim of this study was to evaluate the susceptibility of dentin to brushing abrasion using four different toothbrushes (rotating-oscillating, sonic and two types of manual toothbrushes) with the same brushing forces. Methods Dentin samples (n = 72) were selected from 72 impacted third molars. Half of the surface of dentin samples was covered with an adhesive tape, creating a protected and a freely exposed area in the same specimen. Brushing was performed with either a: sonic (Sonicare PowerUp, Philips GmbH, Hamburg, Germany), b: oscillating-rotating (Oral B Vitality Precisions Clean, Procter & Gamble, Schwalbach am Taunus, Germany) or two different manual toothbrushes c: flat trim brush head toothbrush (Dr. Best: Original, Glaxo-Smith-Kline, Bühl, Germany) and d: rippled-shaped brush head toothbrush (Blend-a-Dent, Complete V-Interdental, Blend-a-med, Schwalbach, Germany) in a custom made automatic brushing machine. The brushing force was set to 2 N and a whitening toothpaste (RDA = 150) was used. The simulation period was performed over a calculated period to mimic a brushing behavior of two times a day brushing for eight years and six months. Dentin loss was quantitatively determined by profilometry and statistically analyzed by Wilcoxon and Mann-Whitney-U Test (p < 0.05). Results The mean (standard deviation) surface loss was 21.03 (±1.26) μm for the sonic toothbrush, 15.71 (±0.85) μm for the oscillating-rotating toothbrush, 6.13 (±1.24) μm for the manual toothbrush with flat trim brush head and 2.50 (±0.43) μm for the manual toothbrush with rippled-shaped brush head. Differences between all groups were statistically significant at p<0.05. Conclusion Using the same brushing force and a highly abrasive toothpaste, manual toothbrushes are significantly less abrasive compared to power toothbrushes for an 8.5—year simulation. PMID:28222156

Spirit Has Flower Power

NASA Technical Reports Server (NTRS)

2004-01-01

The Mars Exploration Rover Spirit took this image with its hazard-avoidance camera on sol 86 (March 31, 2004), after the rover's rock abrasion tool had brushed for three minutes on each of six locations on the rock named 'Mazatzal' to create a flower-shaped mosaic.

The goal for this operation was to create a brushed area big enough for the miniature thermal emission spectrometer to capture within one of its pixels, which are 11 centimeters (4.3 inches) in diameter at the distance between the rock and the instrument. Because the rock abrasion tool creates individual brushed areas only about 5 centimeters (2 inches) in diameter, the team designed this six-location series of tool placements in order to brush 92 percent to 95 percent of the spectrometer's pixel size.

This operation was only the second time the rock abrasion tool has created a brushing mosaic. The first time was a three-spot brushing on the rock called 'Humphrey.' The brush was originally designed to be used as an aide during full grinding operations, however it has been very effective in brushing the top layer off of dusty martian rocks to allow scientists a multi-depth look into the rocks on Mars.

The importance of measuring toothpaste abrasivity in both a quantitative and qualitative way

PubMed Central

Tellefsen, Georg; Johannsen, Annsofi; Liljeborg, Anders

2013-01-01

Objective. To evaluate the relative abrasivity of different toothpastes and polishing pastes both qualitatively and quantitatively. Materials and methods. Acrylic plates were exposed to brushing in a brushing machine with a toothpaste/water slurry for 1 and 6 h. Twelve different toothpastes were used and also four different polishing pastes. The results were evaluated using a profilometer after 1 and 6 h of brushing (corresponding to 2000 and 12 000 double strokes, respectively). A surface roughness value (Ra-value) and also a volume loss value were calculated from the profilometer measurements. These values were then correlated to each other. An unpaired t-test for the difference in the abrasion values between the toothpastes and the abrasion values over time was used. Results. The polishing paste RDA® 170 yielded higher Ra-values than RDA 250®, both after 1 and 6 h of brushing (1.01 ± 0.22 and 8.99 ± 1.55 compared to 0.63 ± 0.26 and 7.83 ± 5.89, respectively) as well as volume loss values (3.71 ± 0.17 and 20.20 ± 2.41 compared to 2.15 ± 1.41 and 14.79 ± 11.76, respectively), thus poor correlations between the RDA and Ra and Volume loss values were shown. Among the toothpastes, Apotekets® showed the highest Ra value after 1 h of brushing and Pepsodent® whitening after 6 h of brushing. Pepsodent® whitening also showed the highest volume loss values, both after 1 and 6 h of brushing. Conclusion. This study emphasizes the importance of not only considering the RDA value, but also a roughness value, when describing the abrasivity of a toothpaste. Furthermore, it can be concluded that so called ‘whitening' toothpastes do not necessarily have a higher abrasive effect than other toothpastes. PMID:22746180

Comparison between observed children's tooth brushing habits and those reported by mothers.

PubMed

Martins, Carolina C; Oliveira, Maria J; Pordeus, Isabela A; Paiva, Saul M

2011-09-03

Information bias can occur in epidemiological studies and compromise scientific outcomes, especially when evaluating information given by a patient regarding their own health. The oral habits of children reported by their mothers are commonly used to evaluate tooth brushing practices and to estimate fluoride intake by children. The aim of the present study was to compare observed tooth-brushing habits of young children using fluoridated toothpaste with those reported by mothers. A sample of 201 mothers and their children (aged 24-48 months) from Montes Claros, Brazil, took part in a cross-sectional study. At day-care centres, the mothers answered a self-administered questionnaire on their child's tooth-brushing habits. The structured questionnaire had six items with two to three possible answers. An appointment was then made with each mother/child pair at day-care centres. The participants were asked to demonstrate the tooth-brushing practice as usually performed at home. A trained examiner observed and documented the procedure. Observed tooth brushing and that reported by mothers were compared for overall agreement using Cohen's Kappa coefficient and the McNemar test. Cohen's Kappa values comparing mothers' reports and tooth brushing observed by the examiner ranged from poor-to-good (0.00-0.75). There were statistically significant differences between observed tooth brushing habits and those reported by mothers (p < 0.001). When observed by the examiner, the frequencies of dentifrice dispersed on all bristles (35.9%), children who brushed their teeth alone (33.8%) and those who did not rinse their mouths during brushing (42.0%) were higher than those reported by the mothers (12.1%, 18.9% and 6.5%, respectively; p < 0.001). In general, there was low agreement between observed tooth brushing and mothers' reports. Moreover, the different methods of estimation resulted in differences in the frequencies of tooth brushing habits, indicative of reporting bias. Data regarding children's tooth-brushing habits as reported by mothers should be considered with caution in epidemiological surveys on fluoridated dentifrice use and the risk of dental fluorosis.

Comparison between observed children's tooth brushing habits and those reported by mothers

PubMed Central

2011-01-01

Background Information bias can occur in epidemiological studies and compromise scientific outcomes, especially when evaluating information given by a patient regarding their own health. The oral habits of children reported by their mothers are commonly used to evaluate tooth brushing practices and to estimate fluoride intake by children. The aim of the present study was to compare observed tooth-brushing habits of young children using fluoridated toothpaste with those reported by mothers. Methods A sample of 201 mothers and their children (aged 24-48 months) from Montes Claros, Brazil, took part in a cross-sectional study. At day-care centres, the mothers answered a self-administered questionnaire on their child's tooth-brushing habits. The structured questionnaire had six items with two to three possible answers. An appointment was then made with each mother/child pair at day-care centres. The participants were asked to demonstrate the tooth-brushing practice as usually performed at home. A trained examiner observed and documented the procedure. Observed tooth brushing and that reported by mothers were compared for overall agreement using Cohen's Kappa coefficient and the McNemar test. Results Cohen's Kappa values comparing mothers' reports and tooth brushing observed by the examiner ranged from poor-to-good (0.00-0.75). There were statistically significant differences between observed tooth brushing habits and those reported by mothers (p < 0.001). When observed by the examiner, the frequencies of dentifrice dispersed on all bristles (35.9%), children who brushed their teeth alone (33.8%) and those who did not rinse their mouths during brushing (42.0%) were higher than those reported by the mothers (12.1%, 18.9% and 6.5%, respectively; p < 0.001). Conclusions In general, there was low agreement between observed tooth brushing and mothers' reports. Moreover, the different methods of estimation resulted in differences in the frequencies of tooth brushing habits, indicative of reporting bias. Data regarding children's tooth-brushing habits as reported by mothers should be considered with caution in epidemiological surveys on fluoridated dentifrice use and the risk of dental fluorosis. PMID:21888664

Analysis of the antibacterial activity and plaque control benefit of colgate total dentifrice via clinical evaluation and real-time polymerase chain reaction.

PubMed

Xu, Tao; Deshmukh, Meenal; Barnes, Virginia Monsul; Trivedi, Harsh M; Du-Thumm, Laurence; Richter, Rose; Cummins, Diane

2005-01-01

This study analyzed, from a combined clinical and molecular biologic perspective, the antibacterial and antiplaque efficacy of Colgate Total dentifrice (CTD). A single-blind crossover study design utilized 11 healthy human subjects. After a one-week washout period, subjects donated dental plaque, received a dental prophylaxis, and subsequently brushed with a test product. Twenty-four hours postbrushing, dental plaque was collected and a clinical plaque score determined. Dental plaque was submitted for Real-time Polymerase Chain Reaction (Real-time PCR) analysis. The same procedure was repeated in accordance with a crossover design for the use of the second test product. Following a one-week washout, a plaque donation, prophylaxis, and brushing with the test product ensued for each subject. Twenty-four hours post-brushing, the subjects returned for a plaque score and plaque donation. Twenty-four hours after brushing, dental plaque coverage increased 17.88% +/- 8.27% with CTD, compared to 30.42% +/- 9.97% with Colgate Cavity Protection (CCP; p = 0.005). Real-time PCR found plaque collected 24 hours after brushing with CTD exhibited, on average, fewer representative periodontal pathogens (Fusobacterium nucleatum, Actinobacillus actinomycetemcomitans, Tannerella forsythensis, and Porphyromonas gingivalis) and fewer early colonizers (Actinomyces naeslundii) than plaque collected before brushing, whereas CCP showed a moderate effect on oral bacteria. The study provides clinical and molecular biological evidence to substantiate the antibacterial and plaque control benefits of Colgate Total, and suggests the value of combining a molecular biological method with clinical research to corroborate clinical benefits.

Rock Abrasion Tool Exhibits the Deep Red Pigment of Mars

NASA Technical Reports Server (NTRS)

2006-01-01

During recent soil-brushing experiments, the rock abrasion tool on NASA's Mars Exploration Rover Spirit became covered with dust, as shown here. An abundance of iron oxide minerals in the dust gave the device a reddish-brown veneer. Investigators were using the rock abrasion tool to uncover successive layers of soil in an attempt to reveal near-surface stratigraphy. Afterward, remnant dirt clods were visible on both the bit and the brush of the tool. Designers of the rock abrasion tool at Honeybee Robotics and engineers at the Jet Propulsion Laboratory developed a plan to run the brush on the rock abrasion tool in reverse to dislodge the dirt and return the tool to normal operation. Subsequent communications with the rover revealed that the procedure is working and the rock abrasion tool remains healthy.

Spirit acquired this approximately true-color image with the panoramic camera on the rover's 893rd sol, or Martian day (July 8, 2006). The image combines exposures taken through three of the camera's filters, centered on wavelengths of 750 nanometers, 530 nanometers, and 430 nanometers.

Antimicrobial capacity of Aloe vera and propolis dentifrice against Streptococcus mutans strains in toothbrushes: an in vitro study.

PubMed

Bertolini, Patrícia Fernanda Roesler; Biondi Filho, Oswaldo; Pomilio, Arnaldo; Pinheiro, Sérgio Luiz; Carvalho, Meghi Silva de

2012-02-01

This study evaluated in vitro the efficiency of Aloe vera and propolis dentifrice on reducing the contamination of toothbrush bristles by a standard strain of Streptococcus mutans (ATCC 25175; SM), after toothbrushing. Fifteen sterile toothbrushes were randomly divided into 5 toothbrushing groups: I (negative control): without dentifrice; II: with fluoridated dentifrice; III: with triclosan and gantrez dentifrice; IV (positive control): without dentifrice and irrigation with 10 mL of 0.12% chlorhexidine gluconate; V: with Aloe vera and propolis dentifrice. In each group, 1 sterile bovine tooth was brushed for 1 min, where the toothbrush bristles were contaminated with 25 µL of SM. After toothbrushing, the bristles were stored in individual test tubes with 3 mL of BHI under anaerobiosis of 37°C for 48 h. Then, they were seeded with sterile swab in triplicate in the Mitis salivarius - Bacitracin culture medium. The samples were kept under anaerobiosis of 37°C for 48 h. Scores were used to count the number of colony forming units (cfu). The results were submitted to the Mann-Whitney statistical test at 5% significance level. There was statistically significant difference (p<0.05) for the reduction of bristle contamination comparing groups II, III, IV and V to group I. It may be stated that after toothbrushing, the Aloe vera and propolis dentifrice reduced the contamination of toothbrush bristles by SM, without differentiation from the other chemical agents used.

Oral fluoride retention after use of fluoride dentifrices.

PubMed

Duckworth, R M; Morgan, S N

1991-01-01

Fluoride is the only extensively clinically proven means of reducing dental caries. Despite a large body of epidemiological data on the effectiveness of fluoride, delivered in the form of dentifrices, mouthrinses, drinking water, etc., the precise mode of action of fluoride is not completely understood. The purpose of this paper is to report an investigation of the link between oral fluoride levels and applied fluoride dose from dentifrices. Human salivary fluoride clearance studies and equilibrium baseline studies of fluoride in saliva and plaque have been carried out with dentifrices which contained 1,000, 1,500 and 2,500 micrograms fluoride per gram as sodium monofluorophosphate. After a single brushing with a fluoride dentifrice, salivary fluoride decreased in two distinct phases: an initial rapid phase which lasted for 40-80 min, depending on the individual, and a second slow phase lasting for several hours. The latter phase is believed to be due to fluoride released from an oral fluoride reservoir. During regular repeated use of the test dentifrices, the equilibrium baseline fluoride concentration, attained in both saliva and plaque between one application and the next, increased significantly compared with placebo values. Such elevated baseline fluoride concentrations also increased with increasing Na2FPO3 content of the dentifrices. The present work supports the concept that labile fluoride, stored in an oral fluoride reservoir at the time of treatment application, may maintain a prolonged protective effect against dental caries.

Enhanced anticaries efficacy of a 0.243% sodium fluoride/10% xylitol/silica dentifrice: 3-year clinical results.

PubMed

Sintes, J L; Escalante, C; Stewart, B; McCool, J J; Garcia, L; Volpe, A R; Triol, C

1995-10-01

To evaluate the efficacy of a sodium fluoride (NaF)/silica/xylitol dentifrice compared with that of a positive control NaF/silica dentifrice on caries increments in school children over a 3-year period in an area without an optimal level of fluoride in the drinking water (mean level <0.1 ppm). A 3-year, double-blind clinical caries study was conducted in 2,630 children initially aged 8-10 years at 17 schools in the San Jose, Costa Rica metropolitan area. Clinical dental examinations were performed at participating schools utilizing portable dental equipment. Caries evaluations employed conventional tactile/visual methodology consisting of artificial light, dental mirrors and single-edge #23 explorers. Children accepted into the study were stratified by age and sex into two balanced groups within each school, and randomly assigned to use either a positive control dentifrice containing 0.243% NaF/silica or a test dentifrice containing 0.234% NaF/silica/10% xylitol. Children were instructed to brush with the assigned dentifrice twice daily. Caries evaluations were conducted at baseline, 2 years, and 3 years. After 3 years, subjects using the 0.234% NaF/silica/10% xylitol dentifrice had statistically significantly reduced decayed/filled surfaces (DFS; -12.3% reduction; P < or = 0.001) and decayed/filled buccal and lingual surfaces (DFS-BL; -10.5% reduction; P < or = 0/01).

An evaluation of 6 dentifrice formulations for supragingival anticalculus and antiplaque activity.

PubMed

Disney, J A; Graves, R C; Cancro, L; Payonk, G; Stewart, P

1989-09-01

A 4 week, double blind clinical trial was conducted to assess the antiplaque/anticalculus activity of test dentifrices containing varying levels of zinc citrate. Subjects were divided into 6 groups, 4 experimental, 1 positive control and a placebo group. All subjects only brushed at home using the placebo control during study weeks 1 and 3. Plaque and calculus were collected at the end of study weeks 2 and 4 on mylar strips worn on lower incisor teeth. Dentifrice efficacy was assessed by comparing group dry and ash weight decrements. While there were no significant differences between the test and control groups, there was a demonstrable trend toward greater inhibition with higher zinc citrate levels, especially among subjects with high levels of plaque and calculus at baseline.

Do Abrasives Play a Role in Toothpaste Efficacy against Erosion/Abrasion?

PubMed

Ganss, Carolina; Möllers, Maike; Schlueter, Nadine

2017-01-01

Abrasives may counteract the efficacy of anti-erosion toothpastes either due to physical effects or due to interaction with active agents. This study aimed to investigate whether the amount of abrasives is a determinant for the efficacy of Sn2+-containing toothpastes with or without chitosan additive. Enamel samples were eroded (0.50 wt% citric acid, pH 2.5; 6 × 2 min/day) on a shaking desk - 30/min in experiment 1 (E1) and 35/min in experiments 2 (E2) and 3 (E3) - and immersed in toothpaste slurries (2 × 2 min). Half of the samples were additionally brushed (15 s, load 200 g) within the immersion time. The toothpastes contained 0, 5, 10, 15, and 20% silica. In E1 and E2 the active ingredients were F- (700 ppm as amine fluoride, 700 ppm as NaF) and Sn2+ (3,500 ppm as SnCl2); in E3 chitosan (0.5%) was additionally added. The placebo contained 20% silica. Tissue loss was determined profilometrically. In E1, slurries completely inhibited tissue loss; distinct surface deposits occurred. With brushing, tissue loss significantly increased up to an abrasive content of 10%, but decreased significantly with higher amounts; 20% silica revealed similar values as the abrasive-free formulation. In E2, all slurries inhibited tissue loss distinctly irrespective of the amounts of abrasives. With brushing, a similar trend as in E1 was observed but with much less efficacy. The chitosan-containing formulations in E3 were much more effective; similar results as in E1 were found. In conclusion, the amount of abrasives had no effect when toothpastes were applied as slurries, but played an important role with brushing. © 2016 S. Karger AG, Basel.

Dentin abrasivity of various desensitizing toothpastes.

PubMed

Arnold, W H; Gröger, Ch; Bizhang, M; Naumova, E A

2016-04-02

The aim of this study was to compare the abrasivity of various commercially available toothpastes that claim to reduce dentin hypersensitivity. Dentin discs were prepared from 70 human extracted molars. The discs were etched with lemon juice for 5 min, and one half of the discs were covered with aluminum tape. Following this, they were brushed with 6 different toothpastes, simulating a total brushing time of 6 months. As a negative control, discs were brushed with tap water only. The toothpastes contained pro-arginine and calcium carbonate, strontium acetate, stannous fluoride, zinc carbonate and hydroxyapatite, new silica, or tetrapotassium pyrophosphate and hydroxyapatite. After brushing, the height differences between the control halves and the brushed halves were determined with a profilometer and statistically compared using a Mann-Whitney U test for independent variables. A significant difference (p < 0.001) in height difference between the controls and the toothpaste-treated samples was found in all cases, except for the stannous fluoride-containing toothpaste (p = 0.583). The highest abrasion was found in the toothpaste containing zinc carbonate and hydroxyapatite, and the lowest was found in the toothpaste containing pro-arginine and calcium carbonate. Desensitizing toothpastes with different desensitizing ingredients have different levels of abrasivity, which may have a negative effect on their desensitizing abilities over a long period of time.

A clinical investigation of the efficacy of three commercially available dentifrices for controlling established gingivitis and supragingival plaque.

PubMed

Singh, Surrendra; Chaknis, Patricia; DeVizio, William; Petrone, Margaret; Panagakos, Fotinos S; Proskin, Howard M

2010-01-01

To assess the efficacy ofa dentifrice containing 0.3% triclosan/2.0% PVM/MA copolymer/0.243% sodium fluoride for controlling established gingivitis and supragingival plaque relative to that of a dentifrice containing 0.454% stannous fluoride, sodium hexametaphosphate, and zinc lactate, and a dentifrice containing 0.243% sodium fluoride as a negative control. Following a baseline examination for gingivitis and supragingival plaque, qualifying adult male and female subjects from the Piscataway, NJ, USA area were randomized into three dentifrice groups. Subjects were instructed to brush their teeth twice daily (morning and evening) for one minute with their assigned dentifrice and a soft-bristled toothbrush. Examinations for gingivitis and supragingival plaque were repeated after six weeks of product use. One-hundred and seventy-one (171) subjects complied with the protocol and completed the study. Relative to the group using the dentifrice with 0.243% sodium fluoride alone, the 0.3% triclosan/2.0% PVM/MA copolymer/0.243% sodium fluoride group exhibited statistically significant reductions in gingival index and supragingival plaque index scores of 25.3% and 33.0%, respectively, after six weeks of product use. Similarly, relative to the group using the 0.243% sodium fluoride dentifrice, the 0.454% stannous fluoride, sodium hexametaphosphate, and zinc lactate dentifrice group exhibited statistically significant reductions in gingival index and plaque index scores of 8.1% and 14.1% after six weeks of product use. Further, relative to the 0.454% stannous fluoride, sodium hexametaphosphate, and zinc lactate dentifrice group, the 0.3% triclosan/2.0% PVM/MA copolymer/0.243% sodium fluoride dentifrice group exhibited statistically significant reductions in gingival index and plaque index scores of 18.7% and 22%, respectively. The overall results of this double-blind clinical study support the conclusion that a dentifrice containing 0.3% triclosan/2.0% PVM/MA copolymer/0.243% sodium fluoride is efficacious for the control of established gingivitis and supragingival plaque as compared to a regular fluoride dentifrice, and that it provides a greater level of efficacy for the control of gingivitis and supragingival plaque than does a dentifrice containing 0.454% stannous fluoride, sodium hexametaphosphate, and zinc lactate.

The clinical anticalculus efficacy of a tartar control whitening dentifrice for the prevention of supragingival calculus in a three-month study.

PubMed

Sowinski, J; Petrone, D M; Battista, G; Petrone, M E; Crawford, R; Patel, S; DeVizio, W; Chaknis, P; Volpe, A R; Proskin, H M

1999-01-01

The objective of this double-blind clinical study was to compare the effect of a new dentifrice (Colgate Tartar Control Plus Whitening Fluoride Toothpaste) for the prevention of supragingival calculus, with that of a commercially available calculus-inhibiting dentifrice (Crest Tartar Control Toothpaste). The study involved adult male and female subjects who had pre-qualified for participation by developing sufficient supragingival calculus (greater than 7.0 on the Volpe-Manhold Calculus Index) during an eight-week screening period. Subjects received a full oral prophylaxis, and were stratified into two treatment groups balanced for age, sex and qualifying calculus score. Subjects were instructed to brush their teeth twice daily (morning and evening) for one minute with their assigned dentifrice using a soft-bristled toothbrush. Examinations for dental calculus were performed after twelve weeks' use of the study dentifrices, using the Volpe-Manhold Calculus Index, Fifty-eight (58) subjects complied with the protocol and completed the entire study. The Colgate Tartar Control Plus Whitening group exhibited a statistically significant (p < 0.001) 34.6% reduction in mean calculus score compared to the Crest Tartar Control group.

In Situ Study to Confirm the Anticaries Potential of a Sodium Monofluorophosphate Dentifrice Containing Calcium Sodium Phosphosilicate.

PubMed

Parkinson, C R; Siddiqi, M; Mason, S; Lippert, F; Hara, A T; Zero, D T

2017-06-01

A randomized, investigator-blind, five-treatment, crossover, non-inferiority study was conducted to investigate the effect of the addition of calcium sodium phosphosilicate (CSPS), an agent known to relieve dentin hypersensitivity, to a sodium monofluorophosphate (SMFP)-containing dentifrice on the enamel remineralization potential of fluoride (F), as assessed by percentage surface microhardness recovery (%SMHR) and enamel fluoride uptake (EFU) using a standard in situ caries model. Seventy-seven subjects wearing bilateral mandibular partial dentures holding partially demineralized bovine enamel specimens 24 hours/day brushed their teeth with their assigned randomized dentifrice containing either 1500 or 0 ppm F with 5% CSPS or 1500, 500, or 0 ppm F with 0% CSPS twice daily for 21 days. The success criterion was to observe a difference in % SMHR between dentifrices containing 1500 ppm F of six units or less in the upper bound of the two-sided 95% confidence interval (CI). Following 21 days of treatment, the upper bound CI of the %SMHR difference between the dentifrices containing 1500 ppm F was 1.66, thus within the non-inferiority limit. No statistically significant differences for %SMHR (p = 0.2601) and EFU (p = 0.2984) were noted between these two dentifrices. The present in situ caries study provides evidence demonstrating that the addition of the calcium-containing compound CSPS to a 1500 ppm F dentifrice does not interfere with the ability of fluoride to remineralize surface-softened enamel; i.e., CSPS neither impairs nor improves the potential cariostatic value of SMFP dentifrice.

Comparative evaluation of antibacterial property and substantivity of chlorhexidine containing dentifrices with sodium lauryl sulfate and Tween as surfactants: an in vivo study.

PubMed

Venu, V; Prabhakar, A R; Basappa, N

2013-01-01

The aim of the study was to determine the antibacterial property and substantivity of chlorhexidine containing dentifrices with sodium lauryl sulfate (SLS) and Tween as surfactants. It is a double-blind cross over the study, a total of 20 children within their mixed dentition period (7-13 year) having Streptococci mutans count more than 10(6) were selected for the main study. Three types of chlorhexidine containing dentifrices were used with a washout period of 1 week. Out of the three toothpastes, one was without surfactant and other two toothpastes contained SLS and Tween as surfactants respectively. 20 volunteers brushed for 1 min during the study day with their assigned toothpaste. Saliva samples were collected before brushing, immediately after brushing and 1, 3, 5, and 7 hand sent for microbial analysis. The culture carried out by inoculating saliva sample onto Mitis salivarius agar for selective isolation of S. mutans followed by counting of colony forming unit. Group I and III (Chlorhexidine and CHX + Tween) had shown statistically significant reduction in bacterial count until 7 h when compared to their baseline values ( P < 0.001). Group II toothpaste (CHX + SLS) had shown significant reduction in bacterial count until 3 h only. On inter group comparison, Group III had shown good amount of percentage reduction in bacterial count when compared to other groups. CHX + Tween toothpaste had shown statistically significant reduction in antibacterial activity and substantivity than other groups. These findings show chlorhexidine containing toothpaste with non-ionic surfactant will be able to maintain the antibacterial property and substantivity of chlorhexidine.

A comparison of dentifrices for clinical relief from dentin hypersensitivity using the Jay Sensitivity Sensor Probe.

PubMed

Hegde, Shashikanth; Rao, B H Sripathi; Kakar, Ravish Chander; Kakar, Ashish

2013-05-01

To evaluate the clinical relief from dentin hypersensitivity among subjects provided with a dentifrice formulated with 8% arginine, calcium carbonate and 1,000 ppm fluoride [sodium monofluorophosphate (MFP)] in comparison to those issued a commercially available dentifrice containing 1,000 ppm fluoride [as sodium monofluorophosphate (MFP)]. Clinical evaluations for hypersensitivity were performed with a novel tactile hypersensitivity measuring instrument--the Jay Sensitivity Sensor (Jay) Probe--in conjunction with evaporative triggers by air blast (Schiff scale) and Visual Analog Scores (VAS). Qualified adults from the Mangalore, India area who presented two teeth with dentin hypersensitivity were enrolled for this double-blind, randomized, parallel, controlled clinical trial conducted in an outpatient clinical setting. At baseline, dentin hypersensitivity was evaluated by the Jay Probe (tactile), air blast and VAS methods. Subjects were randomly issued a study dentifrice and instructed to brush their teeth for 1 minute twice daily with the provided dentifrice. Clinical evaluations for hypersensitivity were repeated after 2, 4 and 8 weeks of product use. 86 subjects (35 males and 51 females) complied with the study protocol and completed the entire study. At each recall visit, both treatment groups demonstrated significant reductions in dentin hypersensitivity from their corresponding baselines (P < 0.05). Subjects assigned the 8% arginine, calcium carbonate and 1,000 ppm fluoride dentifrice demonstrated statistically significant reductions in responses to tactile stimuli, air blast, and VAS responses in comparison to those using the dentifrice containing 1,000 ppm fluoride after 2, 4, and 8 weeks, respectively.

A randomised clinical evaluation of a fluoride mouthrinse and dentifrice in an in situ caries model.

PubMed

Parkinson, Charles R; Hara, Anderson T; Nehme, Marc; Lippert, Frank; Zero, Domenick T

2018-03-01

Fluoride mouthrinses provide advantages for fluoride delivery by maintaining elevated intra-oral fluoride concentrations following fluoride dentifrice use. This in situ caries study investigated potential anti-caries efficacy of a 220 ppm fluoride mouthrinse. This was an analyst-blinded, four-treatment, randomised, crossover study using partially demineralised, gauze-wrapped, human enamel samples mounted in a mandibular partial denture. Participants brushed twice daily for 14 days with either a 1150 ppm fluoride or a fluoride-free placebo dentifrice and either rinsed once daily with the 220 ppm fluoride mouthrinse or not. Following each treatment period, percent surface microhardness recovery (%SMHR) and enamel fluoride uptake (EFU) were assessed. Fifty three participants completed the study. Compared with the placebo dentifrice/no rinse treatment, the fluoride-containing regimens demonstrated greater enamel remineralisation (%SMHR) and fluoridation (EFU): fluoride dentifrice/fluoride rinse (%SMHR difference: 21.55 [95% CI: 15.78,27.32]; EFU difference 8.35 [7.21,9.29]); fluoride dentifrice/no rinse: 19.48 [13.81,25.15]; 6.47 [5.35,7.60]; placebo dentifrice/fluoride rinse: 16.76 [11.06,22.45]; 5.87 [4.72,7.00] (all P < .0001). There were no significant differences in%SMHR between fluoride regimens. The fluoride dentifrice/fluoride rinse regimen was associated with higher EFU than the fluoride dentifrice/no rinse (1.88 [0.75,3.01], P = .0013) and placebo dentifrice/fluoride rinse regimens (2.48 [1.34,3.62], P < .0001). Treatments were generally well-tolerated. The in situ caries model demonstrated that the fluoride mouthrinse is effective in promoting enamel caries lesion remineralisation and fluoridation whether used following a fluoride or non-fluoride dentifrice. Additive (potential) anti-caries benefits of a fluoride rinse after a fluoride dentifrice were confined to enhancements in lesion fluoridation (EFU). In conjunction with a fluoride dentifrice, fluoride mouthrinses enhance enamel fluoridation, which may be useful in caries prevention. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

The scientific rationale and development of an optimized dentifrice for the treatment of dentin hypersensitivity.

PubMed

Tavss, Edward A; Fisher, Steven W; Campbell, Shannon; Bonta, Yolanda; Darcy-Siegel, Joann; Blackwell, Bernie L; Volpe, Anthony R; Miller, Steven E

2004-02-01

To describe the development of a new dentin hypersensitivity treatment, Colgate Sensitive Maximum Strength dentifrice, containing 5% potassium nitrate as the anti-hypersensitivity active agent. The objective was to develop a home-use hypersensitivity dentifrice that would be superior to the market leader, improving on what is available, which also contains 5% potassium nitrate as the anti-hypersensitivity active agent. In vivo (clinicals, taste evaluation and rat caries), in vitro (potassium flux) and analytical (rheology, dispensed volume, scanning electron microscopy, electron scanning chemical analysis and radioactive dentin abrasion) methods were performed. The objective was accomplished with the development of a new activated silica technology that resulted in enhanced potassium ion activity. In vitro documentation, supported by clinical studies, demonstrated that the resulting formula is more effective than the market leader for relief of hypersensitivity pain. Fast pain relief in less than 2 weeks and long-lasting protection against pain with regular use have also been clinically documented. Furthermore, FDA-required in vivo and in vitro studies indicate that this formula, which contains 0.45% stannous fluoride (1100 ppm fluoride) as the anti-caries active agent, is effective against caries. Good taste, acceptable rheology, acceptable abrasivity, and cosmetic and chemical stability have all been engineered into this unique dentin hypersensitivity treatment. In summary, a highly efficacious consumer friendly treatment for dentin hypersensitivity has been developed.

Evaluation of ionic degradation and slot corrosion of metallic brackets by the action of different dentifrices.

PubMed

Brandão, Gustavo Antônio Martins; Simas, Rafael Menezes; de Almeida, Leandro Moreira; da Silva, Juliana Melo; Meneghim, Marcelo de Castro; Pereira, Antonio Carlos; de Almeida, Haroldo Amorim; Brandão, Ana Maria Martins

2013-01-01

To evaluate the in vitro ionic degradation and slot base corrosion of metallic brackets subjected to brushing with dentifrices, through analysis of chemical composition by Energy Dispersive Spectroscopy (EDS) and qualitative analysis by Scanning Electron Microscopy (SEM). Thirty eight brackets were selected and randomly divided into four experimental groups (n = 7). Two groups (n = 5) worked as positive and negative controls. Simulated orthodontic braces were assembled using 0.019 x 0.025-in stainless steel wires and elastomeric rings. The groups were divided according to surface treatment: G1 (Máxima Proteção Anticáries®); G2 (Total 12®); G3 (Sensitive®); G4 (Branqueador®); Positive control (artificial saliva) and Negative control (no treatment). Twenty eight brushing cycles were performed and evaluations were made before (T0) and after (T1) experiment. The Wilcoxon test showed no difference in ionic concentrations of titanium (Ti), chromium (Cr), iron (Fe) and nickel (Ni) between groups. G2 presented significant reduction (p < 0.05) in the concentration of aluminium ion (Al). Groups G3 and G4 presented significant increase (p < 0.05) in the concentration of aluminium ion. The SEM analysis showed increased characteristics indicative of corrosion on groups G2, G3 and G4. The EDS analysis revealed that control groups and G1 did not suffer alterations on the chemical composition. G2 presented degradation in the amount of Al ion. G3 and G4 suffered increase in the concentration of Al. The immersion in artificial saliva and the dentifrice Máxima Proteção Anticáries® did not alter the surface polishing. The dentifrices Total 12®, Sensitive® and Branqueador® altered the surface polishing.

[Historical investigation of dentifrice in China].

PubMed

Kubo, M; Song, Q; Tang, F

2001-01-01

A herbal literature survey was carried out on data concerning historical pharmacognostical changes of "dentifrice" in China and how diseases of the teeth and gums had been treated there in ancient times. It had been considered to be a matter of utmost importance that to prevent teeth from decaying, only the brushing of teeth with a toothbrush was necessary. Over time, various tooth agents have been found to treat oral diseases the teeth and gums. Glycyrrhizae Radix, Ginseng Radix, Scutellariae Radix, Menthae Herbal, and salt were widely used materials. Investigations from all approaches are being carried out to develop remedies for oral diseases, including Kampo medicine and the pharmacological effects of numerous crude drugs. When tracing the pharmacognostical changes of dentifrice in ancient China, we felt wonder at and admiration for the abundance of clinical experiences described in the old herbal and medical literature we researched.

A 6-month study of the effects of 0.3% triclosan/copolymer dentifrice on dental implants.

PubMed

Sreenivasan, Prem K; Vered, Yuval; Zini, Avi; Mann, Jonathan; Kolog, Hilla; Steinberg, Doron; Zambon, Joseph J; Haraszthy, Violet I; da Silva, Maike P; De Vizio, William

2011-01-01

Supportive therapy to maintain dental implants is increasingly important. This study examined the effect of a 0.3% triclosan/2% copolymer dentifrice on oral biofilms and gingival inflammation (GI) on dental implants and peri-implant tissues. One hundred and twenty adults with a dental implant and contra-lateral tooth were enrolled in this 6 month, double-blind, two-treatment, parallel group study. Sixty subjects were randomly assigned to a triclosan/copolymer dentifrice test group and 60 subjects to a fluoride dentifrice control group and instructed to brush twice daily for 6 months. At baseline, 3, and 6 months, a calibrated dentist assessed dental plaque, GI and collected supragingival dental plaque for microbiological analysis. Subjects in the triclosan/copolymer group demonstrated significantly lower levels of dental plaque, gingivitis, and bleeding on probing at 3 and 6 months at both the implant and contra-lateral tooth compared with the fluoride group (p<0.05). There were significantly fewer Gram-negative anaerobes in the triclosan/copolymer group (p<0.05) including >90% reductions in Aggregatibacter actinomycetemcomitans, Campylobacter rectus, Eubacterium saburreum, Fusobacterium nucleatum, Porphyromonas gingivalis, Prevotella melaninogenica, Solobacterium moorei, and Tannerella forsythia. Twice daily use of a triclosan/copolymer dentifrice may enhance dental implant maintenance by reducing dental plaque and GI. © 2010 John Wiley & Sons A/S.

Comparing three toothpastes in controlling plaque and gingivitis: A 6-month clinical study.

PubMed

Triratana, Terdphong; Kraivaphan, Petcharat; Amornchat, Cholticha; Mateo, Luis R; Morrison, Boyce M; Dibart, Serge; Zhang, Yun-Po

2015-04-01

To investigate the clinical efficacy of three toothpastes in controlling established gingivitis and plaque over 6 months. 135 subjects were enrolled in a single-center, double-blind, parallel group, randomized clinical study. Subjects were randomly assigned to one of three treatments: triclosan/copolymer/fluoride dentifrice containing 0.3% triclosan, 2.0% copolymer and 1,450 ppm F as sodium fluoride in a silica base; herbal/bicarbonate dentifrice containing herbal extract and 1,400 ppm F as sodium fluoride in a sodium bicarbonate base; or fluoride dentifrice containing 450 ppm F as sodium fluoride, and 1,000 ppm F as sodium monofluorophosphate. Subjects were instructed to brush their teeth twice daily for 1 minute for 6 months. After 6 months, subjects assigned to the triclosan/copolymer/fluoride group exhibited statistically significant reductions in gingival index scores and plaque index scores as compared to subjects assigned to the herbal/bicarbonate group by 35.4% and 48.9%, respectively. There were no statistically significant differences in gingival index and plaque index between subjects in the herbal/ bicarbonate group and those in the fluoride group. The triclosan/copolymer/fluoride dentifrice was statistically significantly more effective in reducing gingivitis and dental plaque than the herbal/bicarbonate dentifrice, and this difference in efficacy was clinically meaningful.

Comparison of residual salivary fluoride retention using amine fluoride toothpastes in caries-free and caries-prone children.

PubMed

Nazzal, H; Duggal, M S; Kowash, M B; Kang, J; Toumba, K J

2016-06-01

This was to compare the salivary fluoride levels following tooth brushing with amine fluoride toothpastes containing three different concentrations of F (250 ppm F, 500 ppm F and 1250 ppm F) and to evaluate the effect of rinsing with water on the oral fluoride levels up to 90 min. A double blind randomised six-arm crossover study was conducted with 32 child participants. Patients were divided into two groups depending on their caries experience with caries-free group (n = 17, mean age = 72.9 months) and caries-prone group (n = 15, mean age = 69.6 months, mean dmfs = 12.3). Each participant brushed their teeth with a smear of dentifrice containing (250 ppm, 500 ppm and 1250 ppm F toothpastes) for 60 s. After spitting out the dentifrice/saliva slurry, participants either rinsed with water or did not rinse at all. Samples of whole mixed unstimulated saliva were collected at 0 (baseline), 1, 15, 30, 45, 60 and 90 mins post-brushing/rinsing. After completing the study on residual fluoride concentration it was found that caries was not a significant variable (p = 0.567) while every other variable was (all p values <0.001). Time, toothpaste F concentration and rinse had significant effects (p < 0.001). In general, higher residual salivary F concentrations were found with increased F concentration in toothpastes and when no rinsing was performed after brushing. The results of this study support the current recommendation of using toothpastes with >1000 ppm F concentration in children with an increased caries risk in addition to spitting excess toothpaste with no rinsing following brushing.

The role of oral hygiene: does toothbrushing harm?

PubMed

Wiegand, Annette; Schlueter, Nadine

2014-01-01

Although toothbrushing is considered a prerequisite for maintaining good oral health, it also has the potential to have an impact on tooth wear, particularly with regard to dental erosion. Experimental studies have demonstrated that tooth abrasion can be influenced by a number of factors, including not only the physical properties of the toothpaste and toothbrush used but also patient-related factors such as toothbrushing frequency and force of brushing. While abrasion resulting from routine oral hygiene can be considered as physiological wear over time, intensive brushing might further harm eroded surfaces by removing the demineralised enamel surface layer. The effects of brushing on eroded dentine are not fully elucidated, particular under in vivo conditions. However, there are indications that brushing after an acid impact causes less additional hard tissue loss in dentine than in enamel. Toothbrushing frequency and force as well as toothbrush hardness were shown to act as co-factors in the multifactorial aetiology of non-cervical carious lesions. In vitro studies showed that toothbrushing abrasion is primarily related to the abrasivity of the toothpaste, while the toothbrush acts as a carrier, only modifying the effects of the toothpaste. The benefits of normal oral hygiene procedure exceed possible side effects by far, but excessive toothbrushing - especially of eroded teeth - might cause some harmful effects. © 2014 S. Karger AG, Basel.

Flavoring agents present in a dentifrice can modify volatile sulphur compounds (VSCs) formation in morning bad breath.

PubMed

Peruzzo, Daiane Cristina; Salvador, Sérgio Luis; Sallum, Antonio Wilson; Nogueira-Filho, Getúlio da Rocha

2008-01-01

This study aimed to evaluate the effects of a flavor-containing dentifrice on the formation of volatile sulphur compounds (VSCs) in morning bad breath. A two-step, blinded, crossover, randomized study was carried out in 50 dental students with a healthy periodontium divided into two experimental groups: flavor-containing dentifrice (test) and non-flavor-containing dentifrice (control). The volunteers received the designated dentifrice and a new toothbrush for a 3 X/day brushing regimen for 2 periods of 30 days. A seven-day washout interval was used between the periods. The assessed parameters were: plaque index (PI), gingival index (GI), organoleptic breath scores (ORG), VSC levels (as measured by a portable sulphide monitor) before (H1) and after (H2) cleaning of the tongue, tongue coating (TC) wet weight and BANA test from TC samples. The intra-group analysis showed a decrease in ORG, from 3 to 2, after 30 days for the test group (p < 0.05). The inter-group analysis showed lower values in ORG, H1 and H2 for the test group (p < 0.05). There was no difference between the amount of TC between groups and the presence of flavor also did not interfere in the BANA results between groups (p > 0.05). These findings suggest that a flavor-containing dentifrice seems to prevent VSCs formation in morning bad breath regardless of the amount of TC in periodontally healthy subjects.

Preventive effect of toothpastes with MMP inhibitors on human dentine erosion and abrasion in vitro

PubMed Central

Hannas, Angelica Reis; Kato, Melissa Thiemi; Cardoso, Cristiane de Almeida Baldini; Magalhães, Ana Carolina; Pereira, José Carlos; Tjäderhane, Leo; Buzalaf, Marília Afonso Rabelo

2016-01-01

ABSTRACT The use of gels and mouthrinses with MMP inhibitors (chlorhexidine, and green tea extract) was shown to prevent erosive wear. The aim of this study was to analyze the protective effect of toothpastes containing MMP inhibitors on dentine loss induced by erosion in vitro. Material and Methods Five groups each containing 12 specimens of human root dentine were prepared. The specimens were subjected to 1 min erosion by immersion in a cola drink, 4 times a day, for 5 d. Each day, after the first and last erosive challenges, the specimens were brushed for 15 s with a slurry of dentifrice and water (1:3) containing placebo, 1,100 ppm fluoride, 0.61% green tea extract, 0.12% chlorhexidine or 0.004% chlorhexidine (commercial toothpaste). Between the acid challenges, the specimens were stored in artificial saliva with remineralizing potential until the next treatment. Dentine loss was determined using profilometry. Data were analyzed using one-way ANOVA after log transform (p<0.05). Results The mean wear values (μm) were as follows: placebo 1.83±0.53; 0.61% green tea extract 1.00±0.21; fluoride 1.27±0.43; 0.12% chlorhexidine 1.19±0.30; and 0.004% chlorhexidine 1.22±0.46. There was a significant difference in wear between placebo and all the treatment toothpastes, which did not differ from each other. Conclusion The results suggest that toothpastes containing MMP inhibitors are as effective as those based on NaF in preventing dentine erosion and abrasion. PMID:27008258

Preventive effect of toothpastes with MMP inhibitors on human dentine erosion and abrasion in vitro.

PubMed

Hannas, Angelica Reis; Kato, Melissa Thiemi; Cardoso, Cristiane de Almeida Baldini; Magalhães, Ana Carolina; Pereira, José Carlos; Tjäderhane, Leo; Buzalaf, Marília Afonso Rabelo

2016-01-01

The use of gels and mouthrinses with MMP inhibitors (chlorhexidine, and green tea extract) was shown to prevent erosive wear. The aim of this study was to analyze the protective effect of toothpastes containing MMP inhibitors on dentine loss induced by erosion in vitro. Five groups each containing 12 specimens of human root dentine were prepared. The specimens were subjected to 1 min erosion by immersion in a cola drink, 4 times a day, for 5 d. Each day, after the first and last erosive challenges, the specimens were brushed for 15 s with a slurry of dentifrice and water (1:3) containing placebo, 1,100 ppm fluoride, 0.61% green tea extract, 0.12% chlorhexidine or 0.004% chlorhexidine (commercial toothpaste). Between the acid challenges, the specimens were stored in artificial saliva with remineralizing potential until the next treatment. Dentine loss was determined using profilometry. Data were analyzed using one-way ANOVA after log transform (p<0.05). The mean wear values (μm) were as follows: placebo 1.83±0.53; 0.61% green tea extract 1.00±0.21; fluoride 1.27±0.43; 0.12% chlorhexidine 1.19±0.30; and 0.004% chlorhexidine 1.22±0.46. There was a significant difference in wear between placebo and all the treatment toothpastes, which did not differ from each other. The results suggest that toothpastes containing MMP inhibitors are as effective as those based on NaF in preventing dentine erosion and abrasion.

Role of Colgate Total toothpaste in helping control plaque and gingivitis.

PubMed

Rover, Jo-Ann; Leu-Wai-See, Petal

2014-06-01

To assess the anti-plaque and anti-gingivitis effects of a dentifrice containing 0.3% triclosan, 2% copolymer and 0.243% (1,100 ppm) sodium fluoride in subjects with moderate plaque-induced gingivitis. This was a single center, monadic study. Subjects had at least 20 teeth remaining in the functional dentition, excluding third molars. Following a baseline examination for plaque, gingival inflammation and bleeding, 75 qualified healthy adult males and females, ages 18-70 were selected to participate in the study. Dental prophylaxis was performed and subjects were provided with two tubes of toothpaste (Colgate Total) and a soft-bristle toothbrush (Colgate Wave Toothbrush). The subjects were instructed to brush twice daily using a modified Bass brushing technique. At the end of the 6- to 8-week period subjects returned for collection of clinical and subjective data. 75 subjects completed the study. Both clinical and subjective reductions were significant. The results showed statistically significant reductions in plaque index, gingival inflammation and bleeding on probing. The overall conclusion was that Colgate Total was a comprehensive dentifrice that produced a significant reduction in gingivitis, plaque, and bleeding.

In Vitro and In Vivo Evaluations of the Anticalculus Effect of a Novel Stabilized Stannous Fluoride Dentifrice.

PubMed

He, Tao; Anastasia, Mary Kay; Zsiska, Marianne; Farmer, Teresa; Schneiderman, Eva; Milleman, Jeffery L

2017-12-01

To evaluate the effect of a novel stannous fluoride dentifrice with zinc citrate on calculus inhibition using both in vitro and clinical models. Each investigation tested a novel stabilized 0.454% stannous fluoride dentifrice with zinc citrate as an anticalculus agent (Crest® Pro-Health™ smooth formula) compared to a negative control fluoride dentifrice. The in vitro study used the modified Plaque Growth and Mineralization Model (mPGM). Plaque biofilms were prepared and mineralized by alternate immersion of glass rods in human saliva and artificial mineralization solution. Treatments of 25% w/w dentifrice/water slurries were carried out for 60 seconds daily for 6 days, between saliva and mineralization solution immersions. Plaque calcium levels were determined by digestion and inductively coupled plasma optical emission spectroscopy. Student's t-test (p < 0.05) was used for statistical analysis. The clinical study was a parallel group, double-blind, randomized, and controlled trial. Following a dental prophylaxis, subjects entered a two-month run-in phase. At the end, they received a Volpe-Manhold Index (V-MI) calculus examination. Eighty (80) qualified subjects who had formed at least 9 mm of calculus on the linguals of the mandibular anterior teeth were re-prophied and randomly assigned to either the stannous fluoride dentifrice or the negative control. Subjects brushed twice daily, unsupervised, during the three-month test period, returning at Weeks 6 and 12 for safety and V-MI examinations. Statistical analyses were via ANCOVA. In vitro mPGM: The stabilized stannous fluoride dentifrice showed 20% less in vitro tartar formation, measured as calcium accumulation normalized by biofilm mass, versus the negative control (106.95 versus 133.04 µg Ca/mg biofilm, respectively, p < 0.05). Clinical Trial: Seventy-eight (78) subjects completed with fully evaluable data. The stannous fluoride dentifrice group had 15.1% less adjusted mean calculus at Week 6 compared to the negative control group (p = 0.05) and 21.7% less calculus at Week 12 (p < 0.01). Both dentifrices were well-tolerated. The stannous fluoride dentifrice produced significant anticalculus benefits in vitro and in a clinical trial compared to a negative control.

Effectiveness of a new dentifrice with baking soda and peroxide in removing extrinsic stain and whitening teeth.

PubMed

Ghassemi, A; Hooper, W; Vorwerk, L; Domke, T; DeSciscio, P; Nathoo, S

2012-01-01

The primary purpose of this randomized, controlled, six-week clinical trial was to determine the effectiveness and safety of a new whitening dentifrice in removing extrinsic tooth stain and whitening teeth. An additional two-week exploratory study was conducted to determine whether the whitening or stain-prevention activity of the dentifrice would persist following cessation of use. In the first study (Phase I), one-hundred and forty-six qualifying subjects were randomly assigned to either a sodium bicarbonate whitening dentifrice group (Arm & Hammer Advance White Extreme Whitening Baking Soda and Peroxide Toothpaste) or a silica-based negative control dentifrice group, and brushed twice daily with their assigned dentifrice for six weeks. Tooth shade on the labial surfaces of the eight incisors was assessed using a Vita Classic shade guide, and extrinsic tooth stain was scored using a Modified Lobene Stain Index (MLSI) at baseline, week 4, and week 6. In Phase II (after the week 6 examination), volunteers from the Arm & Hammer whitening dentifrice group were randomly assigned to continue using the whitening dentifrice or to use the negative control dentifrice twice daily for two weeks. The six-week shade and stain index scores served as the baseline for this exploratory phase and were rescored after two weeks. The whitening dentifrice group had statistically significant (p < 0.0001) mean shade score reductions of 1.82 and 2.57 from baseline to weeks 4 and 6, respectively. For the same periods, the negative control dentifrice group was virtually unchanged from baseline. For tooth stain, the MLSI total mean scores for the whitening dentifrice group showed statistically significant (p < 0.0001) decreases from baseline of 1.42 (41.6%) and 2.11 (61.6%) at weeks 4 and 6, respectively. In contrast, the negative control dentifrice group had a MLSI reduction of 0.07 at week 4 and a 0.06 increase at week 6. Between-group analyses using baseline-adjusted ANCOVA showed the whitening dentifrice to be statistically significantly more effective (p < 0.0001) than the negative control for shade and tooth stain reductions for all index comparisons. Compared to the six-week (baseline) scores, subjects who continued to use the whitening dentifrice for the additional two weeks experienced statistically significant (p < 0.0001) further mean reductions of 0.88 in shade score and 0.46 in MLSI score, while subjects who switched to the negative control dentifrice experienced smaller, statistically significant (p < 0.05) reductions of 0.34 in shade score and 0.13 in total MLSI score. The Arm & Hammer whitening dentifrice tested in this study is effective for removing extrinsic tooth stain and whitening teeth. While the results also suggest that this dentifrice may have stain-prevention activity that persists following cessation of product use, such activity would need to be confirmed with further studies.

Abrasion of acrylic veneers by simulated toothbrushing.

PubMed

Xu, H C; Söremark, R; Wiktorsson, G; Wang, T; Liu, W Y

1984-12-01

The abrasion responses were tested on four acrylic veneer materials, K + B Plus, K + B 75, Isosit, and Ivocron. The studies were performed in two independent research laboratories. Two different brushing machines were used with an abrasive slurry. The results were used for comparing the degree of abrasion for the resin materials. Three analytical methods of measuring the degree of abrasive wear were used: surface profile measurement, microscopic evaluation, and measurement of loss of volume. Isosit showed the best abrasion resistance of the four materials tested.

Fluoride and calcium concentrations in the biofilm fluid after use of fluoridated dentifrices supplemented with polyphosphate salts.

PubMed

Nagata, Mariana Emi; Delbem, Alberto Carlos Botazzo; Hall, Kevin Bruce; Buzalaf, Marília Afonso Rabelo; Pessan, Juliano Pelim

2017-04-01

The present study evaluated fluoride (F) and calcium (Ca) concentrations in the biofilm fluid formed in situ under cariogenic challenge after using F dentifrices supplemented or not with sodium trimetaphosphate (TMP) or calcium glycerophosphate (CaGP). Volunteers (n = 12) were randomly divided into 5 groups according to the toothpastes used: placebo (without F, CaGP or TMP), 1100 ppm F (1100F) and low-fluoride dentifrice (LFD, 550 ppm F) with no supplementation (550F) or supplemented with 1 % TMP (550F-TMP) or 0.25 % CaGP (550F-CaGP). In each phase, volunteers wore palatal appliances containing 4 bovine enamel blocks. Cariogenic challenge was performed with 30 % sucrose solution, 6 times/day. On the morning of the eigth day, biofilm samples were collected 12 h and 1 h after brushing and cariogenic challenge. F and Ca analyses in the biofilm fluid were performed with the inverted electrode after buffering with TISAB III and using the Arsenazo III method, respectively. Data were submitted to two-way ANOVA (repeated measures) and Student-Newman-Keuls test (p < 0.05). A dose-response relationship was verified between F concentrations in the dentifrices and in the biofilm fluid. Significant differences were observed among placebo, 550F, and 1100F only 1 h after brushing, without statistical differences among 550F, 550F-TMP, and 550F-CaGP. No defined trend was observed among the groups regarding Ca concentrations, with the highest values seen for placebo and 550F-CaGP. The anticaries effect of LFDs supplemented with CaGP or TMP cannot be related to an increased availability of F and Ca in the biofilm fluid. The better performance of LFDs containing CaGP or TMP shown in previous studies should be attributed to their ability to interact with tooth enamel and with the biofilm, rather to their effect on the biofilm fluid.

Impact of toothpaste on abrasion of sound and eroded enamel: An in vitro white light interferometer study.

PubMed

Nakamura, Maria; Kitasako, Yuichi; Nakashima, Syozi; Sadr, Alireza; Tagami, Junji

2015-10-01

To evaluate the influence of brushing using toothpastes marketed under different categories on abrasion of sound and eroded enamel in vitro at nanometer scale using a white light interferometer (WLI). Enamel surface of resin-embedded bovine incisors were fine polished with diamond slurry and divided into testing area (approximately 2 mm x 4 mm) and reference area using a nail varnish. The enamel specimens were randomly assigned to 10 groups (n = 10 each); six of which were subjected to erosive challenge. The testing area in these eroded groups was exposed to 10 ml of Coca-Cola for 90 seconds and then rinsed for 10 seconds in deionized water (DW). Enamel specimens, except for those in one eroded group, were brushed by an automatic brushing machine with 120 linear motion strokes in 60 seconds under load of 250 g with/without toothpaste slurry. After the toothbrushing abrasion, each specimen was rinsed for 10 seconds with DW followed by immersion in artificial saliva for 2 hours. Toothpaste slurries were prepared containing one of the four toothpastes used and DW in a ratio of 1:2. The erosion-abrasion cycle was repeated three times. Then, the nail varnish was removed and enamel surface loss (SL) was measured by the WLI. Data were statistically analyzed by one-way ANOVA followed by Bonferroni's correction at significance level of 0.05. For eroded specimens, the mean SL values of groups not brushed and brushed with no toothpaste were not significantly different, but were significantly lower than those of whitening, anti-erosion and anti-caries toothpaste groups (P < 0.001). The whitening toothpaste group showed significantly higher SL than all other groups (P < 0.001). For sound enamel specimens, SL was not measured except for the whitening toothpaste group.

An in situ/ex vivo comparison of the ability of regular and light colas to induce enamel wear when erosion is combined with abrasion.

PubMed

Rios, Daniela; Santos, Flávia Cardoso Zaidan; Honório, Heitor Marques; Magalhães, Ana Carolina; Wang, Linda; de Andrade Moreira Machado, Maria Aparecida; Buzalaf, Marilia Afonso Rabelo

2011-03-01

To evaluate whether the type of cola drink (regular or diet) could influence the wear of enamel subjected to erosion followed by brushing abrasion. Ten volunteers wore intraoral devices that each had eight bovine enamel blocks divided into four groups: ER, erosion with regular cola; EAR, erosion with regular cola plus abrasion; EL, erosion with light cola; and EAL, erosion with light cola plus abrasion. Each day for 1 week, half of each device was immersed in regular cola for 5 minutes. Then, two blocks were brushed using a fluoridated toothpaste and electric toothbrush for 30 seconds four times daily. Immediately after, the other half of the device was subjected to the same procedure using a light cola. The pH, calcium, phosphorus, and fluoride concentrations of the colas were analyzed using standard procedures. Enamel alterations were measured by profilometry. Data were tested using two-way ANOVA and Bonferroni test (P<.05). Regarding chemical characteristics, light cola presented pH 3.0, 13.7 mg Ca/L, 15.5 mg P/L, and 0.31 mg F/L, while regular cola had pH 2.6, 32.1 mg Ca/L, 18.1 mg P/L, and 0.26 mg F/L. The light cola promoted less enamel loss (EL, 0.36 Μm; EAL, 0.39 Μm) than its regular counterpart (ER, 0.72 Μm; EAR, 0.95 Μm) for both conditions. There was not a significant difference (P>.05) between erosion and erosion plus abrasion for light cola. However, for regular cola, erosion plus abrasion resulted in higher enamel loss than erosion alone. The data suggest that light cola promoted less enamel wear even when erosion was followed by brushing abrasion.

Protocol for measurement of enamel loss from brushing with an anti-erosive toothpaste after an acidic episode.

PubMed

Dehghan, Mojdeh; Vieira Ozorio, Jose Estevam; Chanin, Simon; Tantbirojn, Daranee; Versluis, Antheunis; Garcia-Godoy, Franklin

2017-01-01

Tooth erosion from an acidic insult may be exacerbated by toothbrushing. The purposes of this study were to develop an in vitro methodology to measure enamel loss after brushing immediately following an acidic episode and to investigate the effect of brushing with an anti-erosive toothpaste. The null hypotheses tested were that tooth erosion after brushing with the toothpaste would not be different from brushing with water and that a 1-hour delay before brushing would not reduce tooth erosion. Forty bovine enamel slabs were embedded, polished, and subjected to baseline profilometry. Specimens were bathed in hydrochloric acid for 10 minutes to simulate stomach acid exposure before post-acid profilometry. Toothbrushing was then simulated with a cross-brushing machine and followed by postbrushing profilometry. Group 1 was brushed with water; group 2 was brushed with a 50:50 toothpaste-water slurry; and groups 3 and 4 were immersed in artificial saliva for 1 hour before brushing with water or the toothpaste slurry, respectively. The depth of enamel loss was analyzed and compared using 1-way analysis of variance and post hoc testing (α = 0.05). Greater enamel loss was measured in groups brushed with toothpaste than in groups brushed with water. One-hour immersion in artificial saliva significantly reduced enamel loss when teeth were brushed with water (group 3; P < 0.05) but not with toothpaste (group 4). This study established a protocol for measuring enamel loss resulting from erosion followed by toothbrush abrasion. The results confirmed the abrasive action of toothpaste on acid-softened enamel.

Effects of sodium lauryl sulphate (SLS), present in dentifrice, on volatile sulphur compound (VSC) formation in morning bad breath.

PubMed

Peruzzo, Daiane Cristina; Salvador, Sérgio Luis; Sallum, Antonio Wilson; da Nogueira-Filho, Getúlio Rocha

2008-10-01

The purpose of the present investigation was to evaluate the effects of sodium lauryl sulphate (SLS), present in a commercial dentifrice, on the formation of volatile sulphur compounds (VSC) and tongue coating in a panel of periodontally healthy subjects. A two-step blinded, crossover, randomized study was carried out in 25 dental students with healthy periodontium; these were divided into two experimental groups: SLS (dentifrice with SLS) and WSLS (dentifrice without SLS). The volunteers received the designated dentifrice and a new toothbrush for a 3x/day brushing regimen for 2 periods of 30 days. A seven-day washout interval was used between the periods. The assessed parameters were: plaque index (PI), gingival index (GI), organoleptic breath (ORG), VSC levels by portable sulphide monitor before (H1) and after (H2) cleaning of the tongue, tongue coating wet weight (TC) and benzoyl-DL-arginine-naphthylamide (BANA) test from tongue coating samples. The intra-group analysis showed a decrease in the median of organoleptic scores from 3 to 2 after 30 days for the SLS group (p < 0.05). The inter-group analysis showed lower values in ORG and H1 for the SLS group (p < 0.05). There was no difference between the amount of TC in SLS and WSLS groups. In the BANA test, the presence of SLS did not affect the BANA number of +/- results (p > 0.05). These findings suggest that sodium lauryl sulphate (SLS), present in dentifrice, appears to prevent VSC formation in morning bad breath regardless of the amount of tongue coating in periodontally healthy subjects.

A randomized 3-month clinical comparison of a power toothbrush to a manual toothbrush in the reduction of gingivitis.

PubMed

Li, Zhen; He, Tao; Li, Chun; Sun, Lily; Chang, Jinlan; He, Yanyan; Zhao, Jizhi; Ji, Ning

2016-08-01

To compare the anti-gingivitis effect of a power toothbrush relative to a manual toothbrush control. This was a 3-month, randomized and controlled, single-center, parallel group, examiner-blinded clinical study. 123 Chinese adults in good general health and with at least 15 gingival bleeding sites, as measured by the Gingival Bleeding Index, were enrolled into the study. At baseline, pre-treatment gingivitis levels were assessed using the Mazza Bleeding Index. Subjects were then randomly assigned to receive either an oscillating-rotating power toothbrush [Oral-B Professional Care 7000 (D17u/EB17)] or a flat-trim manual toothbrush with tapered filaments (Lion Dentor Systema). Subjects brushed at home twice-daily with their assigned toothbrush and a marketed sodium fluoride dentifrice (Crest Cavity Protection dentifrice), and were reevaluated at Months 1, 2, and 3. 113 evaluable subjects completed the study. Both groups showed significant reductions in gingivitis from baseline for all time points measured (P< 0.001). At Months 1, 2 and 3, the power toothbrush demonstrated significantly greater gingivitis reductions of 7.11%, 9.20% and 8.47%, respectively, than the manual toothbrush (P< 0.01), and significantly fewer bleeding sites (17.3%, 23.9% and 24.3%, respectively, P< 0.05). No adverse events were reported or observed for either brush during the study. The power brush provided statistically significantly greater reductions in gingivitis compared with a manual toothbrush at Months 1, 2 and 3.

Nanocryl Coating of PMMA Complete Denture Base Materials to Prevent Scratching.

PubMed

Fathi, Hawa M; Benonn, Hajer A; Johnson, Anthony

2017-09-01

The surface of polymethylmethacrylate (PMMA) is vulnerable to indentation by hard objects that may contribute to abrade the material surface and subject it to wear. This phenomenon promotes an increase in the surface roughness leading to microbial colonisation which can endanger the general health of wearers and damage the intra-oral prosthesis. The aim of this study is to investigate the effect of three different nanocryl coating agents (Easy Glaze, G-Coat Plus and Formulation XP) on surface roughness and thickness of PMMA material after a simulating cleaning process utilizing an electric toothbrush and three different dentifrices (pastes and immersion). Acrylic uncoated discs were used as a control group. The results showed that the G-Coat Plus coating agent had less changes in the surface roughness and thickness layer whereas the immersion cleaner revealed less abrasion effect compared with the paste cleaners which could be considered the most suitable cleaner to provide lower abrasivenes and good removal of organic debris. However, using nanofilled sealants did not demonstrate significant improvement in reducing surface roughness p ⟩ 0.05. Nevertheless, it could provide some protection against wearing to the acrylic resin surface during tooth brushing and may provide better resistance to microbial colonisation. Copyright© 2017 Dennis Barber Ltd.

Surface characterization of current composites after toothbrush abrasion.

PubMed

Takahashi, Rena; Jin, Jian; Nikaido, Toru; Tagami, Junji; Hickel, Reinhard; Kunzelmann, Karl-Heinz

2013-01-01

The present study was designed to evaluate the surface roughness and the gloss of current composites before and after toothbrush abrasion. We assessed forty dimensionally standardized composite specimens (n=8/group) from five composites: two nanohybrids (i. e., IPS Empress Direct Enamel and IPS Empress Direct Dentin), two microhybrids (i. e., Clearfil AP-X and Filtek Z250) and one organically modified ceramics (Admira). All of the specimens were polished with 4000-grid silicon carbide papers. Surface roughness was measured with a profilometer and gloss was measured with a glossmeter before and after powered toothbrush abrasion with a 1:1 slurry (dentifrice/tap water) at 12,000 strokes in a toothbrush simulator. There was a significant increase in the surface roughness and a reduction in gloss after toothbrush abrasion in all of the composites except Clearfil AP-X (p<0.05). Simple regression analysis showed that there was not an association between the surface roughness and the gloss (R(2)=0.191, p<0.001).

Tooth brush abrasion of paint-on resins for shade modification of crown and bridge resins.

PubMed

Fujii, Koichi; Ban, Seiji; McCabe, John F

2003-09-01

The purpose of this study was to evaluate the surface roughness and resistance to toothbrush abrasion of three experimental paint-on composite resins developed for the shade modification of crown and bridge resins. The paint-on resins had less filler volume fraction than restorative composites or the crown and bridge resins and consequently were of low viscosity. The maximum surface roughness (Rmax) and the maximum depth loss by abrasion for the paint-on resins following 40,000 cycles of brushing ranged from 2.45 to 4.07 microm and 8.63 to 13.67 microm, respectively. Rmax values were 37.7-67.5% lower than that for the crown and bridge resin subjected to the same test. Wear depth was 19.9-49.4% lower than for the crown and bridge resin. These results suggest that the paint-on resins are expected to have adequate resistance to toothbrush abrasion and may therefore be suitable for clinical use.

Rock Abrasion Tool Exhibits the Deep Red Pigment of Mars

NASA Image and Video Library

2006-07-21

This image shows the round, metallic working end of the rock abrasion tool at the end of a metallic cylinder. The flat grinding face, attached brush, and much of the smooth, metallic exterior of cylinder are covered with a deep reddish-brown layer of dust

Comparison of in vitro fluoride uptake from whitening toothpastes and a conventional toothpaste in demineralised enamel.

PubMed

Altenburger, Markus J; Bernhart, Jasmin; Schicha, Thurid D; Wrbas, Karl-Thomas; Hellwig, Elmar

2010-01-01

Studies on the compatibility of abrasives and fluoride compounds deal exclusively with fluoride uptake and remineralization after storing the enamel specimens in a toothpaste-saliva mixture. The influence of brushing on the fluoride uptake when highly abrasive toothpastes are used has hardly been investigated so far. The aim of the present study was to investigate fluoride uptake in initially demineralised dental enamel after storage in, or brushing with, whitening toothpaste slurries, compared to a conventional toothpaste. For this purpose two widely available whitening toothpastes with ionically bound fluoride (sodium fluoride NaF), two with covalently-bound fluoride toothpastes (sodium monofluorophosphate, NaMFP) and a conventional amine fluoride toothpaste (AmF) were compared. The fluoride uptake after use of the AmF toothpaste was shown to be statistically significantly higher than that after application of the NaF toothpastes, which in turn was statistically significantly higher than the uptake resulting from NaMFP application. The fluoride uptake was slightly higher when the enamel samples were brushed with NaF toothpaste, rather than just stored in the respective toothpaste slurry. Brushing with highly abrasive toothpastes did not negatively influence fluoride uptake in demineralised dental enamel. The ionic form of the fluoride in toothpastes appears to be critical for increased fluoride uptake. The acidic components of the AmF toothpaste improved fluoride uptake compared to alkaline NaF toothpastes.

Toothpastes and enamel erosion/abrasion - Impact of active ingredients and the particulate fraction.

PubMed

Ganss, C; Marten, J; Hara, A T; Schlueter, N

2016-11-01

To investigate in vitro a range of differently characterised toothpastes with respect to their efficacy in an erosion/abrasion setting with special emphasis on the role of the particulate ingredients. Human enamel samples were erosively demineralised with citric acid (2min, 6×/day; 0.5%, pH 2.5; 10 days) and immersed in slurries (2min, 2×/day) either without or with brushing (15s, load 200g). The toothpastes were eight NaF-toothpastes, three hydroxyapatite-toothpastes (one without and two with NaF), one fluoride-free chitosan-toothpaste and three Sn-toothpastes. Negative control was erosion only, positive control was SnF 2 gel. Tissue loss was quantified profilometrically. The SnF 2 gel was most effective (reduction of tissue loss of 79%). Most of the products reduced tissue loss significantly when applied as slurries (between 28 and 66%). Brushing increased tissue loss in almost all toothpastes, only 5 formulations (all Sn-toothpastes and 2 NaF-toothpastes) reduced tissue loss significantly when compared to negative control (between 33 and 59%). There was a non-linear association between abrasiveness and amount of particles in a formulation, the particle size had no impact. Toothpastes had a protecting effect when applied as slurries but to a much lesser degree when applied with brushing. The particulate fraction may be a determinant for toothpaste efficacy in erosion/abrasion settings. Toothpastes are important carriers of active agents against erosion, but physical impacts through brushing modifies efficacy distinctly. Understanding the role of the particulate fraction in toothpastes may offer perspectives for designing effective formulations for patients with erosive lesions. Copyright © 2016 Elsevier Ltd. All rights reserved.

An in vitro screening assay for dental stain cleaning.

PubMed

Wang, Changxiang; Lucas, Robert; Smith, Anthony J; Cooper, Paul R

2017-01-09

The present study aimed to develop an in vitro model for stain removal from natural enamel for the assessment and comparison of oral hygiene products. Bovine teeth (n = 8 per group) were ground/polished to provide flat enamel specimens and ferric-tannate deposits were precipitated onto the enamel surfaces. The ferric-tannate stained enamel specimens were brushed using an in vitro tooth-brushing simulator with slurries containing commercially available toothpaste products, dental abrasive particles, and sodium tripolyphosphate (STP) solutions of different concentrations. The colour of the enamel surfaces was measured using a spectrophotometer before and after stain application as well as after the brushing treatments. Differences in stain removal efficacy were found between the toothpastes categorised as whitening and non-whitening comprising of different types of dental abrasives (hydrated silica and alumina). A mean value of 27% for stain removal was detected for the three non-whitening toothpastes and 59% of stain removal was detected for the three whitening toothpastes after 1000 strokes. Compared with the slurry with Zeodent 113 abrasive alone, the addition of STP provided better performance for stain removal under the same brushing conditions (mean value of 62% for Zeodent 113 abrasive alone and 72% with the addition of 5% (w/w) STP after 1000 strokes). No difference was evident between the STP concentration of 5% (w/w) and 10% (w/w). The ferric-tannate/bovine enamel model reported here provides good stain retention, is rapidly and easily prepared, and is shown to be progressively and reproducibly sensitive to toothbrushing using different toothpastes and surfactant/chelating agent solutions. Importantly, it provides good discrimination between various oral hygiene products. The stain removal assay reported here has considerable potential to enable comparative assessments of different toothpaste types in terms of their cleaning capabilities.

The technology behind Colgate Total Advanced Fresh.

PubMed

Williams, Malcolm I; Cummins, Diane

2003-09-01

In the early 1990s, a breakthrough toothpaste, Colgate Total, was launched with documented long-lasting activity against plaque, gingivitis, calculus, tooth decay, and bad breath. The technology behind this toothpaste is the combination of triclosan, a polyvinylmethylether/maleic acid copolymer, and sodium fluoride. The copolymer ensures maximal oral retention and subsequent release of the antibacterial triclosan. Effective levels of triclosan have been observed in the oral cavity 12 hours after brushing the teeth, allowing prolonged control of oral bacteria that may cause the most common dental problems, including bad breath. Similarly, the enhanced retention of triclosan to oral surfaces after using this revolutionary toothpaste for up to 2 years has led to significantly reduced incremental coronal caries compared to an American Dental Association-Approved anticavity fluoride toothpaste. Furthermore, significantly less calcium remained in dental plaque after brushing the teeth with the triclosan/copolymer toothpaste, resulting in the formation of less tartar. In keeping with the multiple oral health benefits provided by Colgate Total, consumers are now offered a new dentifrice, Colgate Total Advanced Fresh, which provides the numerous therapeutic and esthetic benefits that are the hallmark of Colgate Total. The new dentifrice, which contains an impactful breath-freshening flavor, has been documented to provide sustained control of bad breath over 12 hours.

Profilometric analysis of two composite resins' surface repolished after tooth brush abrasion with three polishing systems.

PubMed

Uppal, Mudit; Ganesh, Arathi; Balagopal, Suresh; Kaur, Gurleen

2013-07-01

To evaluate the effect of three polishing protocols that could be implemented at recall on the surface roughness of two direct esthetic restorative materials. Specimens (n = 40) measuring 8 mm (length) × 5 mm (width) × 4 mm (height) were fabricated in an acrylic mold using two light-cured resin-based materials (microfilled composite and microhybrid composite). After photopolymerization, all specimens were finished and polished with one of three polishing protocols (Enhance, One Gloss, and Sof-Lex polishing systems). The average surface roughness of each treated specimen was determined using 3D optical profilometer. Next all specimens were brushed 60,000 times with nylon bristles at 7200 rpm using crosshead brushing device with equal parts of toothpaste and water used as abrasive medium. The surface roughness of each specimen was measured after brushing followed by repolishing with one of three polishing protocols, and then, the final surface roughness values were determined. The data were analyzed using one-way and two-factor analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD). Significant difference (P < 0.05) in surface roughness was observed. Simulated brushing following initial polishing procedure significantly roughened the surface of restorative material (P < 0.05). Polishing protocols can be used to restore a smooth surface on esthetic restorative materials following simulated tooth brushing.

Effect of a stannous fluoride dentifrice on the sulcular microbiota: a prospective cohort study in subjects with various levels of periodontal inflammation.

PubMed

Benjasupattananan, Supranee; Lai, Caroline S Y; Persson, G Rutger; Pjetursson, Bjarni E; Lang, Niklaus P

2005-01-01

To assess the effects of an experimental 0.454% stannous fluoride (SnF2) dentifrice on the oral sulcular microbiota in patients with various stages of oral diseases using checkerboard DNA-DNA hybridization. In the present one-month, single center, single product, prospective cohort trial, 37 adults (mean age 37.6) were assigned to one of four oral health condition cohorts with seven to 10 subjects each: 1. mild gingivitis, 2. marked generalized gingivitis to moderate periodontitis, 3. caries-prone and 4. treated moderate to advanced chronic periodontitis in supportive periodontal care. All four groups were asked to use the test dentifrice and a power toothbrush twice a day for one minute during a four-week test period. Before and after the trial period, Plaque Indices (PII, Silness and Löe, 1964) and Gingival Indices (GI, Löe and Silness, 1963) were recorded. Subgingival plaque samples were collected from all patients at Baseline, as well as after two and four weeks. These samples were analyzed for content of 40 bacterial species using checkerboard DNA-DNA hybridization. As a result of the only one minute brushing with the stannous fluoride dentifrice, the mean PII at Baseline was significantly lower (p < 0.05) from the mean PII at four weeks. No statistically significant differences were found between premolar and molar mean values. Moreover, no statistically significant differences were found between the mean GI at Baseline and at four weeks. The microbiological analysis showed that at baseline subjects in groups 2 and 4 had significantly higher bacterial loads of bacteria than groups 1, and 3 (i.e. A. actinomyctemcomitans P. gingivalis, T. forsythia, and T. denticola. Over the study period, the total bacterial load did not change in groups 2, 3 and 4. In groups 1 and 3, however, an increase in the loads of Streptococci spp. were noticed (p < 0.05) including S. mitis, S. intermedius, and S. sanguis (p < 0.01) suggesting an increase in the presence of early colonizing and health associated bacteria. One minute brushing with a 0.454% stannous fluoride dentifrice did--after four weeks--not affect the subgingival microbial profiles in patients with moderate periodontitis and treated moderate to advanced periodontitis. However, the sulcular microbial profiles of mild gingivitis and caries-prone patients were affected, indicating a shift towards a gingival health associated microbiota in the sulcular region of patients not affected by attachment loss. RUNNING HEAD: Effect of stannous fluoride on sulcular microbiota.

Control of oral malodour by dentifrices measured by gas chromatography.

PubMed

Newby, Evelyn E; Hickling, Jenneth M; Hughes, Francis J; Proskin, Howard M; Bosma, Marylynn P

2008-04-01

To evaluate the effect of toothpaste treatments on levels of oral volatile sulphur compounds (VSCs) measured by gas chromatography in two clinical studies. These were blinded, randomised, controlled, crossover studies with 16 (study A) or 20 (study B) healthy volunteers between the ages of 19-54. Study A: breath samples were collected at baseline, immediately and lhr after brushing. Four dentifrices (Zinc A, Zinc B, commercially available triclosan dentifrice and zinc free control) were evaluated. Study B: breath samples were collected at baseline, immediately, 1, 2, 3 and 7 hours after treatment. Subjects consumed a light breakfast then provided an additional breath sample between baseline assessment and treatment. Two dentifrices (gel-to-foam and a commercially available triclosan dentrifrice) were evaluated. Breath samples were collected in syringes and analysed for VSCs (hydrogen sulphide, methyl mercaptan and Total VSCs) utilising gas chromatography (GC) with flame photometric detection. Study A: immediately after treatment, a statistically significant reduction in VSCs from baseline was observed for Zinc A product only. A statistically significant reduction in VSCs from baseline was observed after 1 hour for all products. Both zinc products exhibited a significantly greater reduction from baseline VSCs than Colgate Total and Control at all time points. Study B: a statistically significant reduction in VSCs from baseline was observed at all time points for both products. The gel-to-foam product exhibited significantly greater reduction from baseline Total VSC concentration than Colgate Total at all time points from 1 hour post-treatment. Control of oral malodour by toothpaste treatment, evaluated as VSC levels using GC, has been demonstrated. Zinc is effective at reducing VSCs and the efficacy of zinc is formulation dependent. A gel-to-foam dentifrice was more effective at reducing VSCs than Colgate Total up to 7 hours.

Anticaries Potential of a Sodium Monofluorophosphate Dentifrice Containing Calcium Sodium Phosphosilicate: Exploratory in situ Randomized Trial.

PubMed

Parkinson, Charles R; Siddiqi, Muhammad; Mason, Stephen; Lippert, Frank; Hara, Anderson T; Zero, Domenick T

2017-01-01

Calcium sodium phosphosilicate (CSPS) is a bioactive glass material that alleviates dentin hypersensitivity and is postulated to confer remineralization of caries lesions. This single-centre, randomized, single (investigator)-blind, placebo-controlled, crossover, in situ study explored whether the addition of 5% CSPS to a nonaqueous fluoride (F) such as sodium monofluorophosphate (SMFP)-containing dentifrice affects its cariostatic ability. Seventy-seven subjects wore 4 gauze-covered enamel specimens with preformed lesions (2 surface-softened and 2 subsurface) placed buccally on their mandibular bilateral dentures for up to 4 weeks. Subjects brushed twice daily with 1 of the 5 study dentifrices: 927 ppm F/5% CSPS, 927 ppm F/0% CSPS, 250 ppm F/0% CSPS, 0 ppm F/5% CSPS, or 0 ppm F/0% CSPS. Specimens were retrieved after either 21 (surface-softened lesions; analyzed by Knoop surface microhardness [SMH]) or 28 days (subsurface lesions; analyzed by transverse microradiography). The enamel fluoride uptake was determined for all specimens using a microbiopsy technique. The concentrations of fluoride and calcium in gauze-retrieved plaque were also evaluated. Higher dentifrice fluoride concentrations led to greater remineralization and fluoridation of both lesion types and increased plaque fluoride concentrations. CSPS did not improve the cariostatic properties of SMFP; there were no statistically significant differences between 927 ppm F/5% CSPS and 927 ppm F/0% CSPS in percent SMH recovery (p = 0.6788), change in integrated mineral loss (p = 0.5908), or lesion depth (p = 0.6622). Likewise, 0 ppm F/5% CSPS did not provide any benefits in comparison to 0 ppm F/0% CSPS. In conclusion, CSPS does not negatively impact nor does it improve the ability of an SMFP dentifrice to affect remineralization of caries lesions. © 2017 S. Karger AG, Basel.

Looking for Changes in Soil over Time

NASA Technical Reports Server (NTRS)

2006-01-01

The grinding teeth have worn away on the rock abrasion tool of NASA's Mars Exploration Rover Spirit (after exposing interiors of five time more rock targets than its design goal of three rocks) but the tool still has useful wire bristles for brushing targets. In this image, a figure-eight-like imprint in the Martian soil marks the spot where Spirit has begun examining subsurface deposits layer by layer. The circular indentations resulted from brushing by the rock abrasion tool, one of several instruments on the rover's robotic arm. As an effective brushing tool it is now fulfilling a soil profiling experiment on a target called 'Progress.'

The experiment is a multi-step process of carefully brushing away fine layers of soil and then using the Moessbauer and alpha particle X-ray spectrometers, microscopic imager, and panoramic camera to examine the exposed surfaces during the long Martian winter.

This view is a mosaic of exposures taken by Spirit's microscopic imager during the rover's 830th Martian day (May 4, 2006). The total area shown is about 6 centimeters (2.4 inches) square.

Effectiveness of the bucco-lingual technique within a school-based supervised toothbrushing program on preventing caries: a randomized controlled trial

PubMed Central

2011-01-01

Background Supervised toothbrushing programs using fluoride dentifrice have reduced caries increment. However there is no information about the effectiveness of the professional cross-brushing technique within a community intervention. The aim was to assess if the bucco-lingual technique can increase the effectiveness of a school-based supervised toothbrushing program on preventing caries. Methods A randomized double-blinded controlled community intervention trial to be analyzed at an individual level was conducted in a Brazilian low-income fluoridated area. Six preschools were randomly assigned to the test and control groups and 284 five-year-old children presenting at least one permanent molar with emerged/sound occlusal surface participated. In control group, oral health education and dental plaque dying followed by toothbrushing with fluoride dentifrice supervised directly by a dental assistant, was developed four times per year. At the remaining school days the children brushed their teeth under indirect supervising of the teachers. In test group, children also underwent a professional cross-brushing on surfaces of first permanent molar rendered by a specially trained dental assistant five times per year. Enamel and dentin caries were recorded on buccal, occlusal and lingual surfaces of permanent molars during 18-month follow-up. Exposure time of surfaces was calculated and incidence density ratio was estimated using Poisson regression model. Results Difference of 21.6 lesions per 1,000 children between control and test groups was observed. Among boys whose caries risk was higher compared to girls, incidence density was 50% lower in test group (p = 0.016). Conclusion Modified program was effective among the boys. It is licit to project a relevant effect in a larger period suggesting in a broader population substantial reduction of dental care needs. Trial registration ISRCTN18548869. PMID:21426572

Polishing mechanism of light-initiated dental composite: Geometric optics approach.

PubMed

Chiang, Yu-Chih; Lai, Eddie Hsiang-Hua; Kunzelmann, Karl-Heinz

2016-12-01

For light-initiated dental hybrid composites, reinforcing particles are much stiffer than the matrix, which makes the surface rugged after inadequate polish and favors bacterial adhesion and biofilm redevelopment. The aim of the study was to investigate the polishing mechanism via the geometric optics approach. We defined the polishing abilities of six instruments using the obtained gloss values through the geometric optics approach (micro-Tri-gloss with 20°, 60°, and 85° measurement angles). The surface texture was validated using a field emission scanning electron microscope (FE-SEM). Based on the gloss values, we sorted polishing tools into three abrasive levels, and proposed polishing sequences to test the hypothesis that similar abrasive levels would leave equivalent gloss levels on dental composites. The three proposed, tested polishing sequences included: S1, Sof-Lex XT coarse disc, Sof-Lex XT fine disc, and OccluBrush; S2, Sof-Lex XT coarse disc, Prisma Gloss polishing paste, and OccluBrush; and S3, Sof-Lex XT coarse disc, Enhance finishing cups, and OccluBrush. S1 demonstrated significantly higher surface gloss than the other procedures (p < 0.05). The surface textures (FE-SEM micrographs) correlated well with the obtained gloss values. Nominally similar abrasive abilities did not result in equivalent polish levels, indicating that the polishing tools must be evaluated and cannot be judged based on their compositions or abrasive sizes. The geometric optic approach is an efficient and nondestructive method to characterize the polished surface of dental composites. Copyright © 2015. Published by Elsevier B.V.

The Efficacy of Xylitol, Xylitol-Probiotic and Fluoride Dentifrices in Plaque Reduction and Gingival Inflammation in Children: A Randomised Controlled Clinical Trial.

PubMed

Arat Maden, Eda; Altun, Ceyhan; Açikel, Cengizhan

The present prospective, randomised, placebo-controlled, clinical trial was designed to evaluate the clinical effects of a commercially available dentifrice containing fluoride, xylitol or xylitol-probiotic on the decrease of plaque and gingival inflammation in children between 13 and 15 years of age. Forty-eight adolescents were randomly grouped into three groups of n = 16 each: study group A received xylitol (Xyliwhite) toothpaste; study group B received xylitol-probiotic (Periobiotic) toothpaste; and the control group C received fluoride (Colgate Max Fresh) toothpaste. The subjects were instructed to use the dentifrice determined and a modified Bass brushing technique twice a day for two minutes over a 6-week perioed. Clinical evaluation was performed using a gingival index and a plaque index at baseline and at the end of the 6-week period. From day 0 to 42, reductions in the plaque index were statistically significant in all groups, Colgate Max Fresh, PerioBiotic and Xyliwhite (p-values 0.001, 0.001 and 0.035, respectively), but reductions in the gingival index were statistically significant only in the Colgate Max Fresh and PerioBiotic groups (both with p = 0.001), not in the Xyliwhite group (p = 0.116). PerioBiotic toothpaste was found to be better than Xyliwhite and Colgate Max Fresh toothpastes at reducing plaque and gingival scores. However, statistically significant differences with PerioBiotic and Colgate Max Fresh toothpaste were not observed. It was concluded that PerioBiotic was an all-round dentifrice that produced a significant reduction in both gingivitis and plaque.

An Eight-Week Clinical Evaluation of an Oscillating-Rotating Power Toothbrush with a Brush Head Utilizing Angled Bristles Compared with a Sonic Toothbrush in the Reduction of Gingivitis and Plaque.

PubMed

Ccahuana-Vasquez, Renzo A; Conde, Erinn; Grender, Julie M; Cunningham, Pamela; Qaqish, Jimmy; Goyal, C Ram

2015-01-01

To evaluate and compare the efficacy of an oscillating-rotating (O-R) power toothbrush with a brush head utilizing angled bristles to a marketed sonic toothbrush in the reduction of plaque and gingivitis over an eight-week period. This study used a randomized, examiner-blind, single-center, two-treatment, parallel group, eight-week design. Subjects with mild-to-moderate plaque and gingivitis were evaluated for baseline whole mouth, gingival margin, and approximal plaque, gingivitis, and gingival bleeding. Clinical assessments were performed using the Modified Gingival Index, Gingival Bleeding Index, and the Rustogi Modified Navy Plaque Index. Subjects received either the O-R brush (Oral-B Professional Care 1000 [D16u] with Oral-B CrossAction brush head [EB50]) or the sonic brush (Sonicare DiamondClean with the standard DiamondClean brush head). Subjects brushed twice daily for two minutes per brushing with the assigned brush and a standard fluoride dentifrice for eight weeks before returning for plaque and gingivitis evaluations using the same methods. Prior to baseline and Week 8 measurements, participants abstained from oral hygiene for 12 hours. One hundred and forty-eight subjects completed the study; 75 in the O-R group and 73 in the sonic group. Both brushes demonstrated statistically significant reductions in plaque and gingivitis over the eight-week study period (p < 0.00 1). The O-R brush was statistically significantly more effective in reducing plaque and gingivitis than the sonic brush. Whole mouth, gingival margin, and approximal plaque reductions were 27.7%, 46.8%, and 29.3% greater, respectively, compared with the sonic brush, while the reductions in gingivitis, gingival bleeding, and number of bleeding sites were 34.6%, 36.4%, and 36.1% greater, respectively, for the O-R brush than for the sonic brush (p < 0.001 for all six measures). No adverse events were observed for either brush. The plaque and gingivitis reductions for the O-R power brush incorporating the angled-bristled brush head were significantly greater than for the sonic power brush.

Peeling Back the Layers

NASA Technical Reports Server (NTRS)

2004-01-01

NASA's Mars Exploration Rover Spirit took this panoramic camera image of the rock target named 'Mazatzal' on sol 77 (March 22, 2004). It is a close-up look at the rock face and the targets that will be brushed and ground by the rock abrasion tool in upcoming sols.

Mazatzal, like most rocks on Earth and Mars, has layers of material near its surface that provide clues about the history of the rock. Scientists believe that the top layer of Mazatzal is actually a coating of dust and possibly even salts. Under this light coating may be a more solid portion of the rock that has been chemically altered by weathering. Past this layer is the unaltered rock, which may give scientists the best information about how Mazatzal was formed.

Because each layer reveals information about the formation and subsequent history of Mazatzal, it is important that scientists get a look at each of them. For this reason, they have developed a multi-part strategy to use the rock abrasion tool to systematically peel back Mazatzal's layers and analyze what's underneath with the rover's microscopic imager, and its Moessbauer and alpha particle X-ray spectrometers.

The strategy began on sol 77 when scientists used the microscopic imager to get a closer look at targets on Mazatzal named 'New York,' 'Illinois' and 'Arizona.' These rock areas were targeted because they posed the best opportunity for successfully using the rock abrasion tool; Arizona also allowed for a close-up look at a range of tones. On sol 78, Spirit's rock abrasion tool will do a light brushing on the Illinois target to preserve some of the surface layers. Then, a brushing of the New York target should remove the top coating of any dust and salts and perhaps reveal the chemically altered rock underneath. Finally, on sol 79, the rock abrasion tool will be commanded to grind into the New York target, which will give scientists the best chance of observing Mazatzal's interior.

The Mazatzal targets were named after the home states of some of the rock abrasion tool and science team members.

A Randomized in situ Clinical Study of Fluoride Dentifrices on Enamel Remineralization and Resistance to Demineralization: Effects of Zinc.

PubMed

Creeth, Jonathan E; Karwal, Ritu; Hara, Anderson T; Zero, Domenick T

2018-01-01

This study aimed to determine the effect of zinc ions and F concentration in a dentifrice on remineralization of early caries lesions in situ and on resistance to subsequent demineralization. This was a single-center, 6-period, 6-product, blinded (examiner, subject, analyst), randomized (n = 62), crossover study. Products (all NaF) were: 0, 250, 1,150 and 1,426 ppm F (dose-response controls), "Zn-A" (0.3% ZnCl2, 1,426 ppm F), and "Zn-B" (as Zn-A, with high-foaming surfactants) in a conventional silica base. Subjects wore palatal appliances holding partially demineralized bovine enamel specimens. They brushed their teeth with 1.5 g test dentifrice (25 s), then swished the slurry ensuring even exposure of specimens (95 s), expectorated, and rinsed (15 mL water, 10 s). After 4 h intraoral remineralization, specimens were removed and acid-challenged in vitro. Surface microhardness (SMH), measured pre-experimental, post-initial acid exposure, post-remineralization, and post-second acid exposure, was used to calculate recovery (SMHR), net acid resistance (NAR), and a new, specifically demineralization-focused calculation, "comparative acid resistance" (CAR). Enamel fluoride uptake (EFU) was also measured. For the F dose-response controls, all measures showed significant relationships with dentifrice F concentration (p < 0.0001). The presence of zinc counteracted the ability of F to promote remineralization in this model. Compared to the 1,426 ppm F control, the zinc formulations gave reduced SMHR, EFU, and NAR (all p < 0.0001); however, they showed evidence of increased CAR (Zn-A: p = 0.0040; Zn-B: p = 0.0846). Products were generally well tolerated. In this study, increasing dentifrice F concentration progressively increased in situ remineralization and demineralization resistance of early caries enamel lesions. Zinc ions reduced remineralization but could increase demineralization resistance. © 2018 S. Karger AG, Basel.

Effect of tooth brushing on gloss retention and surface roughness of five bulk-fill resin composites.

PubMed

O'Neill, Catherine; Kreplak, Laurent; Rueggeberg, Frederick A; Labrie, Daniel; Shimokawa, Carlos Alberto Kenji; Price, Richard Bengt

2018-01-01

To determine the effects of tooth brushing on five bulk-fill resin based composites (RBCs). Ten samples of Filtek Supreme Enamel (control), Filtek One Bulk Fill, Tetric EvoCeram Bulk Fill, SonicFill 2, SDR flow+, and Admira Fusion X-tra were light cured for 20 seconds using the Valo Grand curing light. After 24 hours storage in air at 37°C, specimens were brushed in a random order using Colgate OpticWhite dentifrice and a soft toothbrush. Surface gloss was measured prior to brushing, after 5,000, 10,000 and 15,000 back and forth brushing cycles. Surface roughness was measured after 15,000 brushing cycles using atomic force microscopy (AFM) and selected scanning electron microscope (SEM) images were taken. The data was examined using ANOVA and pair-wise comparisons using Scheffe's post-hoc multiple comparison tests (α = 0.05). Surface gloss decreased and the surface roughness increased after brushing. Two-way ANOVA showed that both the RBC and the number of brushing cycles had a significant negative effect on the gloss. One-way ANOVA showed that the RBC had a significant effect on the roughness after 15,000 brushing cycles. For both gloss and roughness, brushing had the least effect on the nano-filled control and nano-filled bulk-fill RBC, and the greatest negative effect on Admira Fusion X-tra. The SEM images provided visual agreement. There was an excellent linear correlation (R 2  = 0.98) between the logarithm of the gloss and roughness. After brushing, the bulk-fill RBCs were all rougher than the control nano-filled RBC. The nano-filled bulk-fill RBC was the least affected by brushing. Bulk-fill RBCs lose their gloss faster and become rougher than the nanofilled conventional RBC, Filtek Supreme Ultra. The nanofilled bulk-fill RBC was the least affected by tooth brushing. © 2017 Wiley Periodicals, Inc.

A randomized clinical trial evaluating gingivitis and plaque reduction of an oscillating-rotating power brush with a new brush head with angled bristles versus a marketed sonic brush with self-adjusting technology.

PubMed

Klukowska, Malgorzata; Grender, Julie M; Conde, Erinn; Ccahuana-Vasquez, Renzo Alberto; Ram Goyal, C

2014-08-01

To compare the efficacy of an oscillating-rotating power toothbrush with a novel brush head incorporating angled CrissCross bristles (Oral-B Pro 7000 SmartSeries and Oral-B CrossAction brush head) versus a marketed sonic toothbrush (Colgate ProClinical A1500 with the Triple Clean brush head) in the reduction of gingivitis and plaque over a 6-week period. This was a single center, randomized, open label, examiner-blind, 2-treatment, parallel group study. Study participants who met the entrance criteria were enrolled in the study and randomly assigned to one of the two toothbrush groups. Study participants brushed with their assigned toothbrush and a marketed fluoride dentifrice for 2 minutes twice daily at home for 6 weeks. Gingivitis and plaque were evaluated at baseline and Week 6. Gingivitis was assessed using the Modified Gingival Index (MGI) and Gingival Bleeding Index (GBI) and plaque was assessed using the Rustogi Modified Navy Plaque Index (RMNPI). Data was analyzed using the ANCOVA with baseline as the covariate. In total, 130 study participants were randomized to treatment resulting in 64 study participants per group completing the study. Both brushes produced statistically significant (P < 0.001) reductions in gingivitis and plaque measures relative to baseline. The oscillating-rotating,brush with the novel brush head demonstrated statistically significantly (P < 0.05) greater reductions in all gingivitis measures, as well as whole mouth and interproximal plaque measures, compared to the sonic toothbrush. The benefit for the oscillating- rotating brush over the sonic brush was 21.3% for gingivitis, 35.7% for gingival bleeding, 34.7% for number of bleeding sites, 17.4% for whole mouth plaque, and 21.2% for interproximal plaque. There were no adverse events reported or observed for either brush.

Denture Care: How Do I Clean Dentures?

MedlinePlus

... Avoid stiff-bristled brushes, strong cleansers and harsh toothpaste, as these are too abrasive and can damage your dentures. Whitening toothpastes. Toothpastes advertised as whitening pastes often contain peroxide, ...

Dental considerations for dietary counselling.

PubMed

Duggal, M S; van Loveren, C

2001-01-01

A decline in the prevalence of dental caries over three decades has occurred without a significant change in the consumption of fermentable carbohydrates, indicating that good dental health is achievable with the presence of cariogenic factors in the diet. Since, in many countries 80% of the caries is present in only 20% of the population, 'targeted intervention' would seem a better preventive option, stressing the judicious use of fluoride, plaque control, fissure sealants and a sensible diet. Dietary modification is notoriously difficult to achieve, being incumbent upon the subject's willingness to effect a change in behaviour. Many texts refer to the frequency of consumption of carbohydrates as being all-important, recommending a reduction in the frequency. However, recent evidence suggests it is the frequency of toothbrushing with a fluoride containing dentifrice which is of fundamental importance in promoting remineralisation of enamel. Dietary advice should be formulated which is both realistic and positive. Trying to dissuade children from consuming products, which they perceive to be tasty and pleasurable is counter productive and more emphasis should be given to tooth brushing using a fluoride toothpaste. Also, a fundamental shift away from the idea of 'good foods versus bad foods' is required and more emphasis laid on good diets as opposed to bad diets. Children should be able to enjoy foods traditionally considered 'bad' from a dental viewpoint, as long as they brush their teeth with a fluoride containing dentifrice and have a sensible approach to their consumption.

The In vitro Evaluation of the effect of xyliwhite, probiotic, and the conventional toothpastes on the enamel roughness and microhardness.

PubMed

Maden, E Arat; Altun, C; Polat, G Guven; Basak, F

2018-03-01

The aim of this study was to evaluate the effect of fluoride, Xylitol, Probiotic, and Whitening toothpastes on the permanent teeth enamel roughness and microhardness. One hundred and twenty teeth were randomly divided into 2 groups, each group having 60 samples. G1: The group in which enamel roughness was examined (n = 60). G2: The group in which enamel microhardness was examined (n = 60). Then, these groups were randomly divided into 4 groups among themselves (n = 15). Each group was brushed using four different toothpastes for 1 week with a battery-powered toothbrush in the morning and evening for 2 min. Vicker's hardness tester was used to measure the changes in microhardness, and the profilometer was used to measure the changes in surface roughness. No statistically significant differences were found on surface roughness and microhardness values measured after tooth brushing process in group brushed with Colgate MaxFresh toothpaste (P > 0.01). Statistically significant decrease was observed on Vicker's hardness values measured after tooth brushing process in groups brushed with Ipana White Power Carbonate toothpaste, Xyliwhite Toothpaste Gel, and Periobiotic Probiotic Toothpaste (P < 0.01). Statistically significant increase was observed on surface roughness values in groups brushed with Ipana White Power Carbonate toothpaste, Xyliwhite Toothpaste Gel, Periobiotic Probiotic Toothpaste (P < 0.01). As a result, Colgate MaxFresh abrasive-free toothpaste with fluoride has no effect on permanent tooth enamel surface roughness and microhardness. Xyliwhite, Periobiotic, and Ipana White Power Carbonate-containing abrasive toothpastes led to changes negatively on permanent tooth enamel surface roughness and microhardness.

Development of Abrasion-Resistant Coating for Solar Reflective Films. Cooperative Research and Development Final Report, CRADA Number CRD-07-247

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, Matthew

The purpose of this CRADA is to develop an abrasion-resistant coating, suitable for use on polymeric-based reflective films (e.g., the ReflecTech reflective film), that allows for improved scratch resistance and enables the use of aggressive cleaning techniques (e.g., direct contact methods like brushing) without damaging the specular reflectance properties of the reflective film.

Rock Dusting Leaves 'Mickey Mouse' Mark

NASA Technical Reports Server (NTRS)

2004-01-01

This image taken by the navigation camera on the Mars Exploration Rover Spirit shows the rock dubbed 'Humphrey' and the circular areas on the rock that were wiped off by the rover. The rover used a brush on its rock abrasion tool to clean these spots before examining them with its miniature thermal emission spectrometer. Later, the rover drilled into the rock with its rock abrasion tool, exposing fresh rock underneath.

Important considerations in the development of toothpaste formulations for children.

PubMed

Stovell, Alex G; Newton, Bernie M; Lynch, Richard J M

2013-12-01

A number of factors should be taken into account when designing toothpaste formulations for use by children at the different stages of their development. While adult toothpaste formulations may provide caries prevention benefits for children at risk of caries, these formulations may also contain higher levels of abrasive in order to address the staining needs of the adult population owing to smoking and the consumption of dietary chromogens such as coffee and tea, which are not normally found in the diet of children. While toothpastes formulated for adults are also likely to contain higher concentrations of surfactant and flavour, many children prefer toothpastes with mild flavours and modest foaming characteristics. An ideal children's toothpaste formulation should therefore aim to maximise fluoride availability, with appropriate abrasivity, while still delivering effective cleaning, as well as levels and types of flavour and surfactant to provide an acceptable brushing experience. Selection of toothpaste flavour types for children of different ages should ideally be based directly upon preference data from children. Flavours perceived as pleasant during brushing studies have been linked to increased brushing time, which, in turn, can increase the delivery and efficacy of fluoride from toothpastes. Therefore, manufacturers select tested, child-friendly flavours to maximise compliance, providing a more pleasurable brushing experience and oral health benefits. © 2013 FDI World Dental Federation.

Plaque and tartar on teeth

MedlinePlus

... easily, and the toothpaste should not be abrasive. Electric toothbrushes clean teeth better than manual ones. Brush for at least 2 minutes with an electric toothbrush each time. Floss gently at least once ...

Desensitizing efficacy of nano-carbonate apatite dentifrice and Er,Cr:YSGG laser: a randomized clinical trial.

PubMed

Lee, Su-Young; Jung, Hoi-In; Jung, Bock-Young; Cho, Young-Sik; Kwon, Ho-Keun; Kim, Baek-Il

2015-01-01

The aim of this study was to evaluate the desensitizing effects of a dentifrice containing nano-carbonate apatite (n-CAP) and Er,Cr:YSGG laser in the treatment of dentin hypersensitivity. Most studies of hypersensitivity treatment have been conducted with different methods of professional treatment and self-care in each study. Moreover, clinical studies that compare self-care and professional treatment have not yet been published. Eighty-two patients with dentin hypersensitivity were divided randomly into three groups: (1) a control group with strontium chloride dentifrice (SC), (2) n-CAP dentifrice (n-CAP), and (3) an Er,Cr:YSGG laser (laser) group. The study was conducted for 4 weeks: a treatment period of 2 weeks and a maintenance period of 2 subsequent weeks. The SC and n-CAP groups were instructed to brush their teeth twice a day for 1 min. The laser group visited twice at 1 week intervals for irradiation of the sensitive teeth. The desensitizing effect was evaluated by assessing the tactile sensitivity using the visual analogue scale (VAS), and evaporative air sensitivity was determined using an air blast score (ABS). The n-CAP group and the laser group showed significantly different desensitizing effects in VAS after 4 weeks (69% and 63%, respectively) and a 33% (p<0.05) and 3% (p>0.05) desensitizing effect, respectively, in VAS during the maintenance period. The n-CAP and the laser were effective in reducing dentin hypersensitivity. The laser had a superior desensitizing effect at the initial stage, whereas the n-CAP maintained its effect for a relatively longer time in clinical situations.

Crossover clinical investigation of a whitening chewing gum for inhibiting dental stain formation in conjunction with tooth brushing.

PubMed

Milleman, Jeffery L; Milleman, Kimberly R; Kleber, Carl J; Proskin, Howard M; Dodds, Michael; Kelley, Michael; Ramirez, Lilian

2014-01-01

The purpose of this clinical investigation was to evaluate the effectiveness of a marketed whitening chewing gum compared to a no-gum control in preventing the formation of extrinsic stains on the teeth of stain-forming subjects when chewed over a 12-week period of regular unsupervised use in conjunction with daily tooth brushing. This was a single-center, examiner-blind, randomized, 12-week crossover clinical trial. Stain-forming (after smoking or drinking coffee or tea) adults, starting with a stain-free baseline, either chewed the test gum (Orbit White) unsupervised four times per day, 15 minutes/chew, or used no gum along with daily brushing with a commercially available toothbrush and dentifrice for 12 weeks. At the crossover, all procedures were repeated with subjects assigned the opposite treatment. Extrinsic stain was measured at six and 12 weeks by both the Lobene Stain Index (LSI) and the Modified Lobene Stain Index (MLSI) using separate experienced examiners. After 12 weeks, LSI stain scores showed a significant 25% reduction (p = 0.0008) in new stain formation for subjects using the test chewing gum along with tooth brushing versus tooth brushing alone (no-gum control). The corresponding MLSI stain scores demonstrated a 36% reduction (p < 0.0001) in the formation of extrinsic stain on the teeth. The overall findings of this clinical study demonstrated that regular use of Orbit White chewing gum, soon after smoking or drinking coffee or tea, will supplement daily tooth brushing in preventing unsightly stains from forming on the anterior teeth compared to brushing alone.

The effect of toothbrush bristle stiffness on nanohybrid surface roughness

NASA Astrophysics Data System (ADS)

Zairani, O.; Irawan, B.; Damiyanti, M.

2017-08-01

The surface of a restoration can be affected by toothpaste containing abrasive agents and the stiffness of toothbrush bristles. Objective: To identify the effect of toothbrush bristle stiffness on nanohybrid surface roughness. Methods: Sixteen nanohybrid specimens were separated into two groups. The first group was brushed using soft-bristle toothbrushes, and the second group was brushed using medium-bristle toothbrushes. Media such as aqua bides was used for brushing in both groups. Brushing was done 3 times for 5 minutes. Surface roughness was measured initially and at 5, 10, and 15 minutes using a surface roughness tester. Results: The results, tested with One-Way ANOVA and Independent Samples t Test, demonstrated that after brushing for 15 minutes, the soft-bristle toothbrush group showed a significantly different value (p < 0.05) of nanohybrid surface roughness. The group using medium-bristle toothbrushes showed the value of nano hybrid surface roughness significant difference after brushing for 10 minutes. Conclusion: Roughness occurs more rapidly when brushing with medium-bristle tooth brushes than when brushing with soft-bristle toothbrushes.

The effect of brushing with nano calcium carbonate and calcium carbonate toothpaste on the surface roughness of nano-ionomer

NASA Astrophysics Data System (ADS)

Anisja, D. H.; Indrani, D. J.; Herda, E.

2017-08-01

Nanotechnology developments in dentistry have resulted in the development of nano-ionomer, a new restorative material. The surface roughness of restorative materials can increase bacteria adhesion and lead to poor oral hygiene. Abrasive agents in toothpaste can alter tooth and restorative material surfaces. The aim of this study is to identify the effect of brushing with nano calcium carbonate, and calcium carbonate toothpaste on surface roughness of nano-ionomer. Eighteen nano-ionomer specimens were brushed with Aquabidest (doubledistilled water), nano calcium carbonate and calcium carbonate toothpaste. Brushing lasted 30 minutes, and the roughness value (Ra) was measured after each 10 minute segment using a surface roughness tester. The data was analyzed using repeated ANOVA and one-way ANOVA test. The value of nano-ionomer surface roughness increased significantly (p<0.05) after 20 minutes of brushing with the nano calcium carbonate toothpaste. Brushing with calcium carbonate toothpaste leaves nano-ionomer surfaces more rugged than brushing with nano calcium carbonate toothpaste.

Comparing the effectiveness of four desensitizing toothpastes on dentinal tubule occlusion: A scanning electron microscope analysis.

PubMed

Jena, Amit; Kala, Soumik; Shashirekha, Govind

2017-01-01

Dentin hypersensitivity (DH) is a sudden short sharp pain best explained by hydrodynamic theory. Several agents are available throughout the market that can treat DH either by blocking the nerves that helps in conducting pain or by blocking the open dentinal tubules. The aim of the present study was to compare the tubule occluding efficacy of four different desensitizing dentifrices under scanning electron microscope (SEM). Sixty-two dentin blocks measuring 5 mm × 5 mm × 3 mm were obtained from extracted human molar teeth and were randomly divided into five groups: Group 1 - no treatment (control, n = 2); Group 2 - Pepsodent Pro-sensitive relief and repair ( n = 15); Group 3 - Sensodyne repair and protect ( n = 15); Group 4 - Remin Pro ( n = 15); Group 5 - Test toothpaste containing 15% nano-hydroxyapatite (n-HA) crystals ( n = 15). The specimens were brushed for 2 min/day for 14 days and stored in artificial saliva. After final brushing, specimens were gold sputtered and viewed under SEM at ×2000 magnification. Results obtained were statistically analyzed using nonparametric Kruskal-Wallis test and least significant difference post hoc test. All test groups showed significant increase in dentin tubule occlusion as compared to control group. The highest percentage of tubules occluded was shown by Group 4 and Group 5 which was significantly different from other groups ( P ≤ 0.05), and there was no significant difference in tubule occlusion among them. Newer desensitizing dentifrices containing 15% n-HA and Remin Pro can provide effective tubule occlusion and thereby reduce the pain and discomfort caused by DH.

Toothpastes containing abrasive and chemical whitening agents: efficacy in reducing extrinsic dental staining.

PubMed

Soares, Cristina Neves Girao Salgado; Amaral, Flavia Lucisano Botelho do; Mesquita, Marcelo Ferraz; Franca, Fabiana Mantovani Gomes; Basting, Roberta Tarkany; Turssi, Cecilia Pedroso

2015-01-01

This in vitro study evaluated the efficacy of toothpastes containing abrasive and chemical whitening agents in reducing the extrinsic discoloration of dental enamel. Sixty slabs of dentin from human teeth were sealed so that only the enamel surface was exposed. The enamel surfaces were photographed for initial color assessment. Staining was performed by immersing the dental slabs in 0.2% chlorhexidine solution for 2 minutes and then in black tea for 60 minutes. This process was repeated 15 times. Photographs were taken at the end of the staining process, and the slabs were divided into 5 groups (n = 12), 3 to be brushed with toothpastes containing chemical whitening agents (2 containing phosphate salts and 1 containing phosphate salts plus hydrogen peroxide) and 2 to represent control groups (ordinary/nonwhitening toothpaste and distilled water). The dental slabs were subjected to mechanical toothbrushing with toothpaste slurry or distilled water, according to each group's specifications. After brushing, more photographs were taken for color analysis. The results showed a significant reduction in luminosity after the staining process in addition to an increase in the colors red and yellow (P < 0.001). After brushing, there was a significant increase in luminosity and a reduction in both red and yellow (P < 0.001). However, there was no observed difference between the changes in color values in dental enamel slabs brushed with whitening toothpastes and the changes found in slabs brushed with ordinary toothpaste. The whitening toothpastes did not outperform an ordinary toothpaste in the removal of extrinsic staining.

Sample from Deep in Martian Crust: Marquette Island

NASA Image and Video Library

2010-01-21

Perched on a rippled Martian plain, a dark rock not much bigger than a basketball was the target of interest for NASA Opportunity during the past two months; Opportunity rock abrasion tool brushed dust out of the circular area.

Potential effects of tooth-brushing on human dentin wear following exposure to acidic soft drinks.

PubMed

Choi, S; Park, K-H; Cheong, Y; Moon, S W; Park, Y-G; Park, H-K

2012-08-01

This study used scanning electron microscopy and atomic force microscopy to examine the short-term potential effects of brushing time and the start-time of tooth-brushing after demineralization on primary dentin wear in vitro. Thirty-six noncarious primary central incisors were assigned to 12 experimental groups. Exposure to cola drinks was used to initiate the demineralization process. Three brushing times (5, 15 and 30 s) and four start-times of brushing (0, 30, 60 and 120 min) after an erosive attack were used for the abrasion process. Tooth-brushing the softened dentin surface led to increases in the open tubular fraction and microstructural changes on the dentin surface. Brushing immediately after exposure to cola resulted in the greatest irreversible dentin loss, whereas brushing 60 or 120 min after pretreatment resulted in the least irreversible dentin loss. However, brushing time had no effect on the irreversible loss of dentin wear. Based on these experimental results, tooth-brushing should be performed at least 60 min after consuming a cola drink to achieve the desired tooth cleaning and avoid the introduction of surface lesions on dentin. © 2012 The Authors Journal of Microscopy © 2012 Wadsworth Center, New York State Department of Health.

Abrasive wear of resin composites as related to finishing and polishing procedures.

PubMed

Turssi, Cecilia P; Ferracane, Jack L; Serra, Mônica C

2005-07-01

Finishing and polishing procedures may cause topographical changes and introduce subsurface microcracks in dental composite restoratives. Since both of these effects may contribute toward the kinetics of wear, the purpose of this study was to assess and correlate the wear and surface roughness of minifilled and nanofilled composites finished and polished by different methods. Specimens (n=10) made of a minifilled and a nanofilled composite were finished and polished with one of the four sequences: (1) tungsten carbide burs plus Al(2)O(3)-impregnated brush (CbBr) or (2) tungsten carbide burs plus diamond-impregnated cup (CbCp), (3) diamond burs plus brush (DmBr) or (4) diamond burs plus cup (DmCp). As a control, abrasive papers were used. After surface roughness had been quantified, three-body abrasion was simulated using the OHSU wear machine. The wear facets were then scanned to measure wear depth and post-testing roughness. All sets of data were subjected to ANOVA and Tukey's tests (alpha=0.05). Pearson's correlation test was applied to check for the existence of a relationship between pre-testing roughness and wear. Significantly smoother surfaces were attained with the sequences CbBr and CbCp, whereas DmCp yielded the roughest surface. Regardless of the finishing/polishing technique, the nanofilled composite exhibited the lowest pre-testing roughness and wear. There was no correlation between the surface roughness achieved after finishing/polishing procedures and wear (p=0.3899). Nano-sized materials may have improved abrasive wear resistance over minifilled composites. The absence of correlation between wear and surface roughness produced by different finishing/polishing methods suggests that the latter negligibly influences material loss due to three-body abrasion.

Toothbrush abrasion, simulated tongue friction and attrition of eroded bovine enamel in vitro.

PubMed

Vieira, A; Overweg, E; Ruben, J L; Huysmans, M C D N J M

2006-05-01

Enamel erosion results in the formation of a softened layer that is susceptible to disruption by mechanical factors such as brushing abrasion, tongue friction and attrition. The aim of this study was to investigate the individual contribution of those mechanical insults to the enamel loss caused by dental erosion. Forty two bovine enamel samples were randomly divided into seven groups (n=6 per group) that were submitted to 3cycles of one of the following regimes: erosion and remineralization (er/remin); toothbrush abrasion and remineralization (abr/remin); erosion, toothbrush abrasion and remineralization (er/abr/remin); attrition and remineralization (at/remin); erosion, attrition and remineralization (er/at/remin); simulated tongue friction and remineralization (tg/remin); erosion, simulated tongue friction and remineralization (er/tg/remin). Erosion took place in a demineralization solution (50mM citric acid, pH 3) for 10min under agitation. Brushing abrasion, tongue friction and attrition were simulated for 1min using a home-made wear device. Remineralization was carried out in artificial saliva for 2h. Enamel loss was quantified using optical profilometry. One-way ANOVA indicated a significant difference between the amounts of enamel lost due to the different wear regimes (p

Influence of the Relative Enamel Abrasivity (REA) of Toothpastes on the Uptake of KOH-soluble and Structurally Bound Fluoride.

PubMed

Elmazi, Valbona; Sener, Beatrice; Attin, Thomas; Imfeld, Thomas; Wegehaupt, Florian J

2015-01-01

To determine the influence of the relative enamel abrasivity (REA) of fluoridated toothpaste on the uptake of KOH-soluble and structurally bound fluoride into enamel. Bovine enamel samples were randomly allocated to 6 groups (n=36 per group). Groups A to C were treated with sodium fluoride (NaF) toothpastes and groups D to F with amine fluoride (AmF) toothpastes (1500 ppm F each). The REA in groups A and D was 2, in groups B and E it was 6 and in groups C and F it was 9. Twice a day, 18 samples of each group were immersed for 2 min in a slurry (toothpaste:artificial saliva=1:3), while the remaining samples were brushed with the respective slurry (2.5 N force; 60 strokes/min; 2 min). All samples were stored at 37°C and 100% humidity. After five days, the amount of KOH-soluble and structurally bound fluoride was determined and statistically compared by Scheffe's post-hoc tests. REA value and mode of application (immersion or brushing) had no significant influence on the amount of either kind of fluoride from NaF toothpastes. Only for the NaF toothpaste with REA 6 was the amount of KOH-soluble fluoride significantly higher after brushing. With AmF toothpastes, KOH-soluble and structurally bound fluoride concentrations were significantly higher when the samples were brushed. Furthermore, in the REA-2 group, the amounts of KOH-soluble fluoride (brushed or immersed) and structurally bound fluoride (brushed) were significantly higher than in the other groups. The REA dependency of KOH-soluble and structurally bound fluoride was found only for the AmF toothpastes. Using AmF toothpaste, the mode of application influenced the uptake of KOH-soluble and structurally bound fluoride into enamel.

Surface preparation effects on GTA weld shape in JBK-75 stainless steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, R.D.; Robertson, A.M.; Heiple, C.R.

1993-02-01

The results of a study are reported here on the effects of surface preparation on the shape of autogenous gas tungsten arc (GTA) welds in JBK-75, an austenitic precipitation hardenable stainless steel similar to A286. Minor changes in surface preparation produced substantial changes in the fusion zone shape and welding behavior of this alloy. Increased and more consistent depth of fusion (higher d/w ratios) along with improved arc stability and less arc wander resulted from wire brushing and other abrasive surface preparations, although chemical and machining methods did not produce any increase in depth of fusion. Abrasive treatments roughen themore » surface, increase the surface area, increase the surface oxide thickness, and entrap oxide. The increased weld d/w ratio is attributed to oxygen added to the weld pool from the surface oxide on the base metal. The added oxygen alters the surface-tension-driven fluid flow pattern in the weld pool. Increased depth of fusion in wire-fed U-groove weld joints also resulted when welding wire with a greater surface oxide thickness was used. Increasing the amount of wire brushing produced even deeper welds. However, a maximum in depth of fusion was observed with further wire brushing, beyond which weld fusion depth decreased.« less

A safety study in vitro for the effects of an in-office bleaching system on the integrity of enamel and dentine.

PubMed

Sulieman, M; Addy, M; Macdonald, E; Rees, J S

2004-09-01

The aim of this study was to investigate safety concerns with bleaching procedures by studying the effects of a high concentration hydrogen peroxide (HP) in-surgery bleaching product on enamel and dentine. Flat enamel and dentine samples embedded in epoxy resin were prepared from human third molar teeth. Erosion of enamel: groups of enamel samples were treated with 35% HP then citric acid (CA) or brushing with toothpaste or CA alone and water alone. Enamel Loss was measured using a profilometer. Abrasion/erosion of dentine: groups of dentine specimens were treated as follows: Group 1--brushed with water for 30 min. Group 2--brushed with 35% HP for 30 min. Group 3--power bleached for 30 min and then Group 4--brushed with toothpaste for 1 minute. Group 5--water soaked for 30 min followed by brushing with toothpaste for 1 min. Group 6--orange juice soaked for 30 min followed by brushing with toothpaste for 1 min. Treatment effects were measured using a profilometer. Hardness tests: enamel and dentine specimens were hardness tested using a Wallace indenter prior to and post bleaching. Scanning Electron Microscopy: enamel and dentine specimens were taped and the exposed tissue treated with 35% HP and then studied under scanning electronmicroscopy (SEM). Enamel erosion: bleaching enamel samples had no measurable effect on enamel. Pre-bleaching had no significant effect on subsequent CA erosion or brushing. Abrasion/erosion of dentine: no significant differences were found between treatments 1-5 with little change from baseline detected. Orange juice (Group 6) produced considerable and significantly more erosion than other treatments. Hardness tests: there were no significant changes in hardness values for enamel and dentine. SEM: there was no evidence of any topographical changes to either enamel or dentine. Using one of the highest concentrations of HP for tooth bleaching procedures and maximum likely peroxide exposure, there was no evidence of deleterious effects on enamel or dentine. It must be assumed that studies which reported adverse effects on enamel and or dentine of bleaches reflect not the bleach itself but the pH of the formulation used.

Prevention of lingual calculus formation with daily use of 6% H2O2/2% pyrophosphate whitening strips.

PubMed

Farrell, S; Barker, M L; Gerlach, R W; Putt, M S; Milleman, J L

2009-01-01

This randomized controlled clinical trial was conducted to evaluate whether daily use of a hydrogen peroxide/ pyrophosphate-containing antitartar whitening strip might safely yield clinical reductions in post-prophylaxis calculus accumulation. A three-month, randomized controlled trial was conducted to compare calculus accumulation with a daily 6% hydrogen peroxide/pyrophosphate strip versus regular brushing. After an eight-week run-in phase to identify calculus formers, a prophylaxis was administered, and 77 subjects were randomly assigned to daily strip or brushing only groups. All subjects received an anticavity dentifrice (Crest Cavity Protection) and manual brush for use throughout the three-month study; for subjects assigned to the experimental group, strip application was once daily for five minutes on the facial and lingual surfaces of the mandibular teeth. Efficacy was measured as mm calculus (VMI) before prophylaxis and after six and 12 weeks of treatment, while safety was assessed from examination and interview. Subjects ranged in age from 21-87 years, with groups balanced (p > 0.26) on pertinent demographic and behavioral parameters, and pre-prophylaxis calculus baseline mean scores (16.0 mm). At Week 6, calculus accumulation was lower in the strip group, with adjusted mean (SE) lingual VMI of 12.0 (0.87) for the strip group and 17.0 (0.88) for the brushing control. At Week 12, calculus accumulation was lower in the strip group, with adjusted mean (SE) lingual VMI of 14.3 (0.85) for the strip group and 17.2 (0.86) for the brushing control. Treatments differed significantly (p < 0.02) on calculus accumulation at both time points. A total of three subjects (8%) in the strip group and two subjects (5%) in the brushing control had mild oral irritation or tooth sensitivity during treatment; no one discontinued early due to an adverse event. Daily use of hydrogen peroxide whitening strips with pyrophosphate reduced calculus formation by up to 29% versus regular brushing, without meaningful adverse events.

Impact of Gastric Acid Induced Surface Changes on Mechanical Behavior and Optical Characteristics of Dental Ceramics.

PubMed

Kulkarni, Aditi; Rothrock, James; Thompson, Jeffery

2018-01-14

To test the impact of exposure to artificial gastric acid combined with toothbrush abrasion on the properties of dental ceramics. Earlier research has indicated that immersion in artificial gastric acid has caused increased surface roughness of dental ceramics; however, the combined effects of acid immersion and toothbrush abrasion and the impact of increased surface roughness on mechanical strength and optical properties have not been studied. Three commercially available ceramics were chosen for this study: feldspathic porcelain, lithium disilicate glass-ceramic, and monolithic zirconium oxide. The specimens (10 × 1 mm discs) were cut, thermally treated as required, and polished. Each material was divided into four groups (n = 8 per group): control (no exposure), acid only, brush only, acid + brush. The specimens were immersed in artificial gastric acid (50 ml of 0.2% [w/v] sodium chloride in 0.7% [v/v] hydrochloric acid mixed with 0.16 g of pepsin powder, pH = 2) for 2 minutes and rinsed with deionized water for 2 minutes. The procedure was repeated 6 times/day × 9 days, and specimens were stored in deionized water at 37°C. Toothbrush abrasion was performed using an ISO/ADA design brushing machine for 100 cycles/day × 9 days. The acid + brush group received both treatments. Specimens were examined under SEM and an optical microscope for morphological changes. Color and translucency were measured using spectrophotometer CIELAB coordinates (L*, a*, b*). Surface gloss was measured using a gloss meter. Surface roughness was measured using a stylus profilometer. Biaxial flexural strength was measured using a mechanical testing machine. The data were analyzed by one-way ANOVA followed by Tukey's HSD post hoc test (p < 0.05). Statistically significant changes were found for color, gloss, and surface roughness for porcelain and e.max specimens. No statistically significant changes were found for any properties of zirconia specimens. The acid treatment affected the surface roughness, color, and gloss of porcelain and e.max ceramics. The changes in translucency and mechanical strength for all materials were not statistically significant. Zirconia ceramic showed resistance to all treatments. © 2018 by the American College of Prosthodontists.

Polyelectrolyte brushes: a novel stable lubrication system in aqueous conditions.

PubMed

Kobayashi, Motoyasu; Terada, Masami; Takahara, Atsushi

2012-01-01

Surface-initiated controlled radical copolymerizations of 2-dimethylaminoethyl methacrylate (DMAEMA), 2-(methacryloyloxy)ethyl phosphorylcholine (MPC), 2-(methacryloyloxy)ethyltrimethylammonium chloride) (MTAC), and 3-sulfopropyl methacrylate potassium salt (SPMK) were carried out on a silicon wafer and glass ball to prepare polyelectrolyte brushes with excellent water wettability. The frictional coefficient of the polymer brushes was recorded on a ball-on-plate type tribometer by linear reciprocating motion of the brush specimen at a selected velocity of 1.5 x 10(-3) m s-1 under a normal load of 0.49 N applied to the stationary glass ball (d = 10 mm) at 298 K. The poly(DMAEMA-co-MPC) brush partially cross-linked by bis(2-iodoethoxy)ethane maintained a relatively low friction coefficient around 0.13 under humid air (RH > 75%) even after 200 friction cycles. The poly(SPMK) brush revealed an extremely low friction coefficient around 0.01 even after 450 friction cycles. We supposed that the abrasion of the brush was prevented owing to the good affinity of the poly(SPMK) brush for water forming a water lubrication layer, and electrostatic repulsive interactions among the brushes bearing sulfonic acid groups. Furthermore, the poly(SPMK-co-MTAC) brush with a chemically cross-linked structure showed a stable low friction coefficient in water even after 1400 friction cycles under a normal load of 139 MPa, indicating that the cross-linking structure improved the wear resistance of the brush layer.

Structure zone diagram and particle incorporation of nickel brush plated composite coatings

PubMed Central

Isern, L.; Impey, S.; Almond, H.; Clouser, S. J.; Endrino, J. L.

2017-01-01

This work studies the deposition of aluminium-incorporated nickel coatings by brush electroplating, focusing on the electroplating setup and processing parameters. The setup was optimised in order to increase the volume of particle incorporation. The optimised design focused on increasing the plating solution flow to avoid sedimentation, and as a result the particle transport experienced a three-fold increase when compared with the traditional setup. The influence of bath load, current density and the brush material used was investigated. Both current density and brush material have a significant impact on the morphology and composition of the coatings. Higher current densities and non-abrasive brushes produce rough, particle-rich samples. Different combinations of these two parameters influence the surface characteristics differently, as illustrated in a Structure Zone Diagram. Finally, surfaces featuring crevices and peaks incorporate between 3.5 and 20 times more particles than smoother coatings. The presence of such features has been quantified using average surface roughness Ra and Abbott-Firestone curves. The combination of optimised setup and rough surface increased the particle content of the composite to 28 at.%. PMID:28300159

Structure zone diagram and particle incorporation of nickel brush plated composite coatings

NASA Astrophysics Data System (ADS)

Isern, L.; Impey, S.; Almond, H.; Clouser, S. J.; Endrino, J. L.

2017-03-01

This work studies the deposition of aluminium-incorporated nickel coatings by brush electroplating, focusing on the electroplating setup and processing parameters. The setup was optimised in order to increase the volume of particle incorporation. The optimised design focused on increasing the plating solution flow to avoid sedimentation, and as a result the particle transport experienced a three-fold increase when compared with the traditional setup. The influence of bath load, current density and the brush material used was investigated. Both current density and brush material have a significant impact on the morphology and composition of the coatings. Higher current densities and non-abrasive brushes produce rough, particle-rich samples. Different combinations of these two parameters influence the surface characteristics differently, as illustrated in a Structure Zone Diagram. Finally, surfaces featuring crevices and peaks incorporate between 3.5 and 20 times more particles than smoother coatings. The presence of such features has been quantified using average surface roughness Ra and Abbott-Firestone curves. The combination of optimised setup and rough surface increased the particle content of the composite to 28 at.%.

Structure zone diagram and particle incorporation of nickel brush plated composite coatings.

PubMed

Isern, L; Impey, S; Almond, H; Clouser, S J; Endrino, J L

2017-03-16

This work studies the deposition of aluminium-incorporated nickel coatings by brush electroplating, focusing on the electroplating setup and processing parameters. The setup was optimised in order to increase the volume of particle incorporation. The optimised design focused on increasing the plating solution flow to avoid sedimentation, and as a result the particle transport experienced a three-fold increase when compared with the traditional setup. The influence of bath load, current density and the brush material used was investigated. Both current density and brush material have a significant impact on the morphology and composition of the coatings. Higher current densities and non-abrasive brushes produce rough, particle-rich samples. Different combinations of these two parameters influence the surface characteristics differently, as illustrated in a Structure Zone Diagram. Finally, surfaces featuring crevices and peaks incorporate between 3.5 and 20 times more particles than smoother coatings. The presence of such features has been quantified using average surface roughness Ra and Abbott-Firestone curves. The combination of optimised setup and rough surface increased the particle content of the composite to 28 at.%.

Randomized clinical study of alterations in the color and surface roughness of dental enamel brushed with whitening toothpaste.

PubMed

de Moraes Rego Roselino, Lourenço; Tirapelli, Camila; de Carvalho Panzeri Pires-de-Souza, Fernanda

2018-03-30

This clinical study evaluated the influence of whitening toothpaste on color and surface roughness of dental enamel. Initially, the abrasiveness of the toothpastes used (Sorriso Dentes Brancos [SDB]; Colgate Luminous White and Close up White Now) was tested on 30 (n = 10) plexiglass acrylic plates that were submitted to mechanical tooth brushing totalizing 29,200 cycles. Subsequently, 30 participants were selected, and received a toothbrush and nonwhitening toothpaste (SDB). The participants used these products for 7 days and initial color readouts (Spectrophotometer) and surface roughness of one maxillary central incisors was performed after this period of time. For surface roughness readouts, one replica of the maxillary central incisor was obtained by a polyvinyl siloxane impression material (Express) and polyurethane resin. After baseline measurements, participants were separated into three groups (n = 10), according to the toothpaste used. The participants returned after 7, 30, and 90 days when new color readouts and surface roughness were recorded. The measured values were statistically analyzed (2-way-ANOVA, repeated measures, Tukey, P < .05). Whitening toothpastes did not promote significant (P > .05) color alteration and nor increased the surface roughness of the dental enamel in brushing time of the study. The abrasiveness of whitening toothpaste and the brushing trial period did not affect the surface roughness of dental enamel. However, color changes observed on enamel were above the perceptibility and acceptability thresholds reported in the literature. The over-the-counter toothpastes tested had an effect on dental enamel color above the perceptibility and acceptability thresholds but did not change the surface roughness of the teeth. © 2018 Wiley Periodicals, Inc.

Evaluation of a dental floss containing soluble pyrophosphate on calculus formation using a short-term clinical model.

PubMed

Kleber, C J; Putt, M S; Milleman, J L; Harris, M

1998-01-01

This clinical study compared the effect of a dental floss containing 0.25 mg tetrasodium pyrophosphate per cm and a placebo floss on supragingival calculus formation using a 6-week, partial-mouth toothshield model. The six lower anterior teeth were scaled and polished before each 2-week period (i.e., pre-trial, washout, trial). During both the pre-trial and trial periods, subjects brushed twice daily with a non-tartar control dentifrice, while a toothshield protected the six test teeth from brushing. After rinsing with water and removing the shield, they flossed the test teeth. All subjects used placebo floss during the pre-trial period in order to determine the baseline Volpe-Manhold Index (VMI) calculus formation scores, which were used to balance groups for the trial period. During the trial period, one group used the placebo floss, while the second group used the pyrophosphate floss. The final results demonstrated that the pyrophosphate floss significantly inhibited calculus formation between teeth (mesial-distal scores) by 21%, and on labial surfaces by 37% relative to the placebo floss.

'King George Island' Brushed

NASA Technical Reports Server (NTRS)

2006-01-01

[figure removed for brevity, see original site] Annotated Version

This mosaic was made from frames acquired by the microscopic imager on NASA's Mars Exploration Rover Spirit during Spirit's 1,031 Martian day, or sol, on the red planet (Nov. 27, 2006). It shows a rock target called 'King George Island' after the target was brushed by the rover's rock abrasion tool. The mosaic covers approximately 6 centimeters (2.4 inches) across and shows the granular nature of the rock exposure. The grains are typically about 1 millimeter (.04 inches) wide. Data from the rover's Moessbauer spectrometer provides evidence that they have an enhanced amount of the mineral hematite relative to surrounding soils.

Toothbrushing before or after an acidic challenge to minimize tooth wear? An in situ/ex vivo study.

PubMed

Wiegand, Annette; Egert, Sebastian; Attin, Thomas

2008-02-01

To evaluate whether patients should be advised to perform toothbrushing before or after an acidic challenge to minimize enamel and dentin wear by brushing abrasion. The study was a two-period crossover design (A and B, each 14 days) in which three enamel and dentin specimens were fixed in intraoral appliances of 10 volunteers. The following regimens were performed three times a day with at least 4 hours in between: A: 20-second brushing treatment in an automatic brushing machine, 5 minutes intraoral exposure of the specimens, extraoral erosion of enamel and dentin specimens for 40 seconds or B: Extraoral erosion for 40 seconds, 5 minutes intraoral exposure of the specimens, 20-second brushing treatment in an automatic brushing machine. Enamel and dentin loss at the end of each 14-day regimen was assessed by profilometry and statistically analyzed by t-test. For all volunteers, mean enamel and dentin wear was significantly lower when brushing treatment was performed before erosion (A: enamel: 2.3 +/- 1.0 microm, dentin: 4.1 +/- 1.6 microm) than when brushing was applied after erosion (B: enamel: 6.4 +/- 3.0 microm, dentin: 15.3 +/- 6.8 microm). It was concluded that patients awaiting an erosive attack should perform toothbrushing prior to rather than after an acidic challenge to minimize enamel and dentin wear.

Focus on 'Flatrock'

NASA Technical Reports Server (NTRS)

2004-01-01

This panoramic image of the 3.1 millimeter-deep (just over one-tenth of an inch) hole ground by the Mars Exploration Rover Opportunity's rock abrasion tool in the target called 'Mojo 2' on 'Flatrock' was taken on the 44th martian day, or sol, of the mission. It will help complete the chemical analysis of the lowest layer of the outcrop in the crater where the rover now resides. After a brief brushing on sol 45, the science team plans to place Opportunity's spectrometers on the hole to collect data vital to their understanding of this impressive outcrop.

Scientists believe that the spherule or 'blueberry' in the upper right area of the circular impression was sliced in half by the rock abrasion tool. 'Blueberries' are a known obstruction to the grinding tool that cause it to terminate its sequence. Despite the stall, the rock abrasion tool abraded 'Flatrock' for one hour and five minutes, producing a cavity ripe for investigation.

Brushed Target on Rock 'Champagne' in Gusev Crater

NASA Technical Reports Server (NTRS)

2005-01-01

NASA's Mars Exploration Rover Spirit took this microscopic image of a target called 'Bubbles' on a rock called 'Champagne' after using its rock abrasion tool to brush away a coating of dust. The circular brushed area is about 5 centimeters (2 inches) across. This rock is different from rocks out on the plains of Gusev Crater but is similar to other rocks in this area of the 'Columbia Hills' in that it has higher levels of phosphorus. Plagioclase, a mineral commonly found in igneous rocks, is also present in these rocks, according to analysis with the minature thermal emission spectrometer. By using the alpha particle X-ray spectrometer to collect data over multiple martian days, or sols, scientists are also beginning to get measurements of trace elements in these rocks. Spirit took the images that are combined into this mosaic on sol 354 (Dec. 30, 2004).

Effect of a calcium glycerophosphate fluoride dentifrice formulation on enamel demineralization in situ.

PubMed

Tenuta, Livia Maria Andaló; Cenci, Maximiliano Sergio; Cury, Altair A Del Bel; Pereira-Cenci, Tatiana; Tabchoury, Cínthia Pereira Machado; Moi, Gisele Pedroso; Cury, Jaime Aparecido

2009-10-01

To evaluate in situ the effect and mechanisms involved in the anticariogenic effect of a calcium glycerophosphate fluoride dentifrice. In a double-blind, crossover design, a non-F dentifrice (negative control), a F dentifrice and a F dentifrice containing 0.13% CaGP were compared regarding the inhibition of enamel demineralization. Both F dentifrices contained 1500 microg F/g (w/w) as sodium monofluorophosphate (MFP). Bovine enamel blocks were mounted in contact with a S. mutans test plaque, in palatal appliances worn by 10 volunteers. 30 minutes after treatment with the dentifrices, a sucrose rinse was performed and enamel demineralization was assessed after an additional 45 minutes. No significant difference was observed among groups in the calcium and inorganic phosphate concentrations in the fluid phase of the test plaque 30 minutes after the dentifrice use (P > 0.05), but F concentration was significantly higher for both F dentifrices (P < 0.05). Also, the dentifrices did not differ regarding the pH before or 5 minutes after the sugar challenge (P > 0.05). A higher mineral loss was observed for the non-F dentifrice group (P < 0.05), but no significant difference was observed between the F dentifrices containing CaGP or not (P > 0.05). Using this in situ model, the findings suggested that CaGP at the concentration tested did not enhance the inhibition of enamel demineralization promoted by F dentifrice.

Effect of nanofillers' size on surface properties after toothbrush abrasion.

PubMed

Cavalcante, Larissa M; Masouras, Konstantinos; Watts, David C; Pimenta, Luiz A; Silikas, Nick

2009-02-01

To investigate the effect of filler-particle size of experimental and commercial resin composites, undergoing toothbrush abrasion, on three surface properties: surface roughness (SR), surface gloss (G) and color stability (CS). Four model (Ivoclar/Vivadent) and one commercial resin composite (Tokuyama) with varying filler-size from 100-1000 nm were examined. Six discs (10 mm x 2 mm) from each product were prepared and mechanically polished. The samples were then submitted to 20,000 brushing strokes in a toothbrush abrasion machine. SR parameters (Ra, Rt and RSm), G, and CS were measured before and after toothbrush abrasion. Changes in SR and G were analyzed by 2-way ANOVA, with Bonferroni post hoc test. CS values were submitted to one-way ANOVA and Bonferroni post hoc test (alpha=0.05). Initial G values ranged between 73-87 gloss units (GU) and were reduced after toothbrush abrasion to a range of 8-64 GU. Toothbrush abrasion resulted in significant modifications in SR and G amongst the materials tested, attributed to filler sizes. There was statistically significant difference in color (delta E* ranged from 0.38-0.88). Filler size did not affect color stability. Toothbrush abrasion resulted in rougher and matte surfaces for all materials tested. Although the individual differences in surface roughness among filler sizes were not always significant, the correlation showed a trend that larger filler sizes resulted in higher surface roughness after abrasion for the SR parameters Ra and Rt (r = 0.95; r = 0.93, respectively). RSm showed an increase after toothbrush abrasion for all resin composites, however no significant correlation was detected (r = 0.21).There was a significant correlation between G and Ra ratios (r = - 0.95).

Enhancement of plaque removal by baking soda toothpastes from less accessible areas in the dentition.

PubMed

Thong, S; Hooper, W; Xu, Y; Ghassemi, A; Winston, A

2011-01-01

To determine if baking soda toothpastes are relatively more effective than non-baking soda toothpastes in promoting plaque removal from less accessible sites in the dentition. Several single-brushing comparisons of baking soda and non-baking soda toothpastes for their overall ability to remove plaque have been published. In this study, individual comparisons of these published data, comparing the plaque removal performance of baking soda and non-baking soda toothpastes at various sites in the dentition, were examined to see if there were any site-dependant performance trends. The site-specific single-brushing data were then combined and analyzed in two ways. Meta-analyses of the clinical studies were performed to compare baking soda's relative plaque removal advantage at various sites in the mouth using paired t-testing at p <0.05. Also, plaque index reductions at various sites due to brushing with baking soda toothpastes were graphically compared with plaque index reductions due to brushing with non-baking soda dentifrices. The percent relative plaque removal advantage for baking soda toothpastes at various sites were plotted against the reduction in plaque index due to brushing with non-baking soda toothpastes. Individual comparisons showed that brushing with the toothpastes containing baking soda generally removed significantly more plaque from each site than brushing with toothpastes without baking soda. The relative efficacy advantage for baking soda toothpastes was consistently higher at sites where the non-baking soda toothpastes removed less plaque. Meta-analytical comparisons confirmed baking soda toothpastes to be relatively more effective in enhancing plaque removal from sites where less plaque was removed compared to brushing with non-baking soda toothpastes (p < 0.05). Graphically, the baking soda toothpastes' relative plaque removal advantage could be seen to increase hyperbolically with decreasing plaque removal by the non-baking soda toothpastes with which they were compared. We presuppose that the reason less plaque is removed by non-baking soda toothpastes at some sites than others is that these sites are less accessible to the toothbrush. These results show that baking soda toothpastes are relatively more effective in enhancing plaque removal from harder-to-reach areas of the dentition (p <0.05), i.e., from lingual than facial surfaces, from posterior than anterior areas, and from proximal than mid-surface sites.

The protective effect of SnF2 containing toothpastes and solution on enamel surfaces subjected to erosion and abrasion in situ.

PubMed

Hove, L H; Stenhagen, K R; Holme, B; Tveit, A B

2014-08-01

Stannous fluoride solutions have shown promising protective effect against erosion/abrasion, but the effect of SnF2 toothpastes is uncertain. The aim of the study was to test the inhibiting effect of two SnF2 toothpastes and a SnF2 solution against erosive/abrasive wear in a single-blind, randomised in situ study, using a white light interferometer. Sixteen human molars were each divided into four specimens, mounted on mouth appliances and worn by 8 volunteers for 9 days. Specimens were brushed with toothpaste twice each day for 30 s either with fluoride-free toothpaste or toothpastes including SnF2. Toothpaste was left on the surface for 90 additional seconds. Group 1, fluoride-free toothpaste; Group 2, toothpaste A (0.4% SnF2, Solidox); Group 3, toothpaste B (0.454 % SnF2, Oral-B(®)); Group 4, brushed with fluoride-free toothpaste (30 s) and treated for 2 min with a 0.4 % SnF2 solution (1,000 ppm F). To mimic gastric reflux/vomit, specimens were etched for 2 min twice a day (0.01 M HCl). Procedures were performed extra-orally. The mean enamel wear (in μm) for the control specimens was: -29.2 ± SD 10.5; for group 2 -14.5 SD ± 9.3; for group 3 -33.3 SD ± 7.4, and for group 4 +0.4 SD ± 1.3. The specimens treated with SnF2 solution and toothpaste A showed significantly lower enamel wear than the control group. Toothpaste B gave no significant reduction in enamel wear. The SnF2 solution fully protected the enamel surface against erosive and abrasive challenges. The SnF2 toothpaste A (Solidox) showed less, but significant protection of the enamel, while no statistically significant protection was demonstrated by SnF2 toothpaste B (Oral-B(®) Pro-Expert).

Evaluation of antimicrobial efficacy of Aloe vera and Meswak containing dentifrices with fluoridated dentifrice: An in vivo study

PubMed Central

Bhati, Neha; Jaidka, Shipra; Somani, Rani

2015-01-01

Aim: To comparatively evaluate the antimicrobial efficacy of fluoridated and herbal dentifrices. Materials and Methods: Sixty students in the age group 6–12 years with DMF/def score 0 were selected from an orphanage center. The participants were divided into four groups. In group A, no dentifrice was used; in group B, fluoride containing dentifrice was used; group C subjects used Aloe vera containing dentifrice; and in group D, Meswak containing dentifrice was used. The salivary samples were collected at the washout period of 2 days, 15 days, and 30 days and cultured on Mitis Salivarius Agar for determining Streptococcus mutans count. Results obtained were statistically analyzed using Student's t-test. Results: There was an increase in bacterial count in group A where no dentifrices were used, while the bacterial count steadily decreased in groups B, C, and D by 83.7%, 80.94%, and 83.5%, respectively. Conclusion: Herbal dentifrices containing A. vera and Meswak can be safely recommended as an alternative to fluoridated dentifrices in terms of antimicrobial efficacy. PMID:26539392

The health belief model and determinants of oral hygiene practices and beliefs in preteen children: a pilot study.

PubMed

Walker, Kimberly; Jackson, Richard

2015-01-01

There is limited understanding of children's behavioral decisions for practicing good oral hygiene. The purpose of this study was to identify factors that may motivate children to practice good oral hygiene. Guided by the Health Belief Model (HBM), eight focus groups of 42 American children (second through fifth graders) were interviewed concerning their histories with caries, perceived confidence in brushing, self-perceived susceptibility and vulnerability for caries and/or poor oral health, and perceived benefits and barriers to practicing oral hygiene. Most children equated good oral health as being central to their overall health; however, some viewed poor oral health as occurring only in the elderly while others believed poor oral health could begin at any age. Children cited esthetic appearance of teeth and the desire to please others by brushing without reminders as motivators of good oral hygiene. The greatest barriers to performing oral hygiene were a perceived lack of time and limited access to toothbrushes and dentifrice when away. To motivate children in this age range, emphasis should be placed on the positive aspects of maintaining good oral hygiene for its contribution to appearance and its implication for an overall healthy body and self-image.

Polymer Claw: Instant Underwater Adhesive

DTIC Science & Technology

2012-03-23

technology is the use of pressure sensitive microcapsules , which release reactive amine crosslinkers into an adhesive putty when pressed against the...PROIECT GOALS AND OBIECTIVES 2 2 KEY ACCOMPLISHMENTS 2 3.1 KICKOFF MEETING 3 3.2 AMINE MICROENCAPSULATION 3 3.3 CAUSTIC CLEANING AGENT 5 3.4...caustic, and the abrasive brush. We successfully synthesized amine-filled microcapsules and a dry mixture of caustic ingredients that only activate when

A 12-week clinical comparison of an oscillating-rotating power brush versus a marketed sonic brush with self-adjusting technology in reducing plaque and gingivitis.

PubMed

Klukowska, Malgorzata; Grender, Julie M; Conde, Erinn; Goyal, C Ram

2013-01-01

The aim of this investigation was to assess the comparative gingivitis and plaque reduction efficacy of a leading oscillating-rotating power toothbrush and a recently introduced sonic toothbrush in adults with gingivitis. This was a 12-week, randomized and controlled, parallel group, examiner-blind, single-center clinical study of 130 adults with pre-existing gingivitis and plaque. At baseline, the Modified Gingival Index (MGI), Gingival Bleeding Index (GBI), and total number of bleeding sites were assessed, along with plaque levels (whole mouth, gingival margin, and interproximal) via the Rustogi Modified Navy Plaque Index (RMNPI). Qualified subjects were randomly assigned to one of two power toothbrush test groups: the Oral-B Triumph with SmartGuide (marketed in the United States as the Oral-B Professional Care SmartSeries 5000 [D34]) oscillating-rotating brush, or the Colgate ProClinical A1500 (also marketed as elmex ProClinical) sonic brush. Subjects brushed at home for two minutes twice daily with their assigned power toothbrush and a marketed sodium fluoride dentifrice, and were reevaluated for gingivitis at Week 4 and Week 12 via the MGI, GBI, and total number of bleeding sites, and for plaque reduction via the RMNPI. Ninety-seven percent (97%) of the 130 enrolled subjects completed the trial and 62 and 65 subjects in the oscillating-rotating and sonic brush groups, respectively, had evaluable data for analysis. Statistically significant mean reductions in all three gingivitis parameters and plaque relative to baseline were seen at both Weeks 4 and 12 with unsupervised use of both test toothbrushes (p < 0.001). The oscillating-rotating power brush provided statistically significantly superior reductions compared to the sonic brush in mean adjusted MGI (31% and 29% at Weeks 4 and 12, respectively; p < 0.001), GBI (17% at Week 12; p = 0.047), and total number of bleeding sites (48% and 30% at Weeks 4 and 12, respectively; p = 0.002), and produced statistically significantly greater relative mean adjusted plaque reductions for RMNPI whole mouth plaque (38% and 24% at Weeks 4 and 12, respectively; p < 0.001), gingival margin plaque (36% at Week 4; p = 0.004), and interproximal plaque (39% and 26% at Weeks 4 and 12, respectively; p < 0.001). Both power toothbrushes were well-tolerated. An advanced oscillating-rotating power toothbrush produced substantial, statistically superior reductions in plaque and gingivitis via multiple outcome measures compared to a new sonic toothbrush after both four weeks and 12 weeks of tooth brushing.

Effect of a chitosan additive to a Sn2+-containing toothpaste on its anti-erosive/anti-abrasive efficacy--a controlled randomised in situ trial.

PubMed

Schlueter, N; Klimek, J; Ganss, C

2014-01-01

It is well known that Sn(2+) is a notable anti-erosive agent. There are indications that biopolymers such as chitosan can enhance the effect of Sn(2+), at least in vitro. However, little information exists about their anti-erosive/anti-abrasive in situ effects. In the present in situ study, the efficacy of Sn(2+)-containing toothpastes in the presence or absence of chitosan was tested. Ten subjects participated in the randomised crossover study, wearing mandibular appliances with human enamel specimens. Specimens were extraorally demineralised (7 days, 0.5% citric acid, pH 2.6; 6 × 2 min/day) and intraorally exposed to toothpaste suspensions (2 × 2 min/day). Within the suspension immersion time, one half of the specimens were additionally brushed intraorally with a powered toothbrush (5 s, 2.5 N). Tested preparations were a placebo toothpaste (negative control), two experimental toothpastes (F/Sn = 1,400 ppm F(-), 3,500 ppm Sn(2+); F/Sn/chitosan = 1,400 ppm F(-), 3,500 ppm Sn(2+), 0.5 % chitosan) and an SnF2-containing gel (positive control, GelKam = 3,000 ppm Sn(2+), 1,000 ppm F(-)). Substance loss was quantified profilometrically (μm). In the placebo group, tissue loss was 11.2 ± 4.6 (immersion in suspension) and 17.7 ± 4.7 (immersion in suspension + brushing). Immersion in each Sn(2+)-containing suspension significantly reduced tissue loss (p ≤ 0.01); after immersion in suspension + brushing, only the treatments with GelKam (5.4 ± 5.5) and with F/Sn/chitosan (9.6 ± 5.6) significantly reduced loss [both p ≤ 0.05 compared to placebo; F/Sn 12.8 ± 6.4 (not significant)] Chitosan enhanced the efficacy of the Sn(2+)-containing toothpaste as an anti-erosive/anti-abrasive agent. The use of Sn(2+)- and chitosan-containing toothpaste is a good option for symptomatic therapy in patients with regular acid impacts.

Surface roughness and bacterial adhesion on root dentin treated with diode laser and conventional desensitizing agents.

PubMed

Cury, Maiza S; Silva, Camilla B; Nogueira, Ruchele D; Campos, Michelle G D; Palma-Dibb, Regina G; Geraldo-Martins, Vinicius R

2018-02-01

The treatments for dentin hypersensitivity (DH) may change the surface roughness of the root dentin, which can lead to biofilm accumulation, increasing the risk of root caries. The aim was to compare the surface roughness of root dentin after different treatments of DH and the biofilm formation on those surfaces. After initial surface roughness (Sa) assessment, 50 bovine root fragments received the following treatments (n = 10): G 1-no treatment; G2-5% sodium fluoride varnish; G3-professional application of a desensitizing dentifrice; G4-toothbrushing with a desensitizing dentifrice; and G5-diode laser application (908 nm; 1.5 W, 20 s). The Sa was reevaluated after treatments. Afterward, all samples were incubated in a suspension of Streptococcus mutans at 37 °C for 24 h. The colony-forming units (CFU) were counted using a stereoscope, and the results were expressed in CFU/mL. The one-way ANOVA and the Tukey's tests compared the roughness data and the results obtained on the bacterial adhesion test (α = 5%). G2 (2.3 ± 1.67%) showed similar Sa variation than G1 (0.25 ± 0.41%) and G5 (5.69 ± 0.99%), but different from group G3 (9.05 ± 2.39%). Group 4 showed the highest Sa variation (30.02 ± 3.83%; p < 0.05). Bacterial adhesion was higher in G4 (2208 ± 211.9), suggesting that bacterial growth is greater on rougher surfaces. The diode laser and the conventional treatments for DH may change the surface roughness of the root dentin, but only brushing with desensitizing dentifrice induced a higher bacteria accumulation on root dentin surface.

Comparative evaluation of cemental abrasion caused by soft and medium bristle hardness toothbrushes at three predetermined toothbrushing forces: An in vitro study

PubMed Central

Joshi, Chaitanya Pradeep; Patil, Agraja Ganpat; Karde, Prerna Ashok; Mahale, Swapna Arunkumar; Dani, Nitin Hemchandra

2017-01-01

Background: Plaque control has been shown to have a pivotal role in maintaining optimal periodontal health. Toothbrushing as a mechanical plaque control tool is the most popular and effective option for self-performed oral health maintenance. However, the detrimental effects of bristle hardness and force exerted by toothbrushes on the tooth surface are the areas of concern. Objective: The aim of this in vitro study was to evaluate the abrasive effect of two different manual toothbrushes exerting predetermined forces on cemental surfaces of the teeth. Materials and Methods: Sixty extracted first molars were selected. Totally six experimental groups were formed based on the three predetermined forces 1.5, 3, and 4.5 Newton (N) and two types of manual toothbrushes, i.e., soft and medium bristle hardness. Buccal and lingual surfaces were independently brushed for 5000 cycles using specially designed toothbrushing machine. Throughout the experiment, type and quantity of toothpaste were kept constant. Post 5000 cycles of toothbrushing, change in surface roughness was measured using profilometer in microns and change in weight indicating loss of substance was measured in milligrams. Results: Abrasion of cementum is force dependent. Data revealed that both soft and medium bristle hardness toothbrushes cause significant cemental abrasion at 3 and 4.5 N forces. Conclusions: Higher is the force, more is the cemental surface abrasion. Soft bristled toothbrush causes more cemental abrasion than medium bristled toothbrush at 3 and 4.5 N forces. PMID:29386794

The role of erosion, abrasion and attrition in tooth wear.

PubMed

Barbour, Michele E; Rees, Gareth D

2006-01-01

There is increasing clinical awareness of erosion of enamel and dentine by dietary acids and the consequent increased susceptibility to physical wear. Enamel erosion is characterized by acid-mediated surface softening that, if unchecked, will progress to irreversible loss of surface tissue, potentially exposing the underlying dentine. In comparison, dentine erosion is less well understood as the composition and microstructure are more heterogeneous. Factors which affect the erosive potential of a solution include pH, titratable acidity, common ion concentrations, and frequency and method of exposure. Abrasion and attrition are sources of physical wear and are commonly associated with tooth brushing and tooth-to-tooth contact, respectively. A combination of erosion and abrasion or attrition exacerbates wear; however, further research is required to understand the role of fluoride in protecting mineralized tissues from such processes. Abrasive wear may be seen in a wide range of patients, whereas attritive loss is usually seen in individuals with bruxism. Wear processes are implicated in the development of dentine hypersensitivity. Saliva confers the major protective function against wear due to its role in pellicle formation, buffering, acid clearance, and hard tissue remineralization. This review focuses on the physiochemical factors impacting tooth wear.

Ambient, rapid and facile deposition of polymer brushes for immobilization of plasmonic nanoparticles

NASA Astrophysics Data System (ADS)

Yilmaz, Hatice; Pekdemir, Sami; Ipekci, Hasan H.; Kiremitler, N. Burak; Hancer, Mehmet; Onses, M. Serdar

2016-11-01

The immobilization of nanoparticles (NPs) is of great interest to many technological applications and scientific fields. Methods to immobilize NPs either lack the uniformity, robustness and controllability or require complex and impractical preparation techniques. This paper aims in closing this gap by presenting practical routes in preparation of poly(2-vinyl pyridine) (P2VP) brush grafted silicon oxide terminated substrates for immobilization of NPs. Here, we demonstrate that hydroxyl-terminated P2VP can be deposited using different coating techniques and grafted in air at processing times as short as a few minutes. The grafted P2VP brushes can immobilize spherical Au nanoparticles that are 20 nm in diameter, on the surface of substrates with densities as high as ∼600 particles/μm2. The density of the immobilized NPs can be further tuned with the grafting conditions and duration of the particle treatment. More than 80% of the grafted brushes and Au NPs remain on the substrate following abrasion tests proving mechanical robustness of the coatings. The immobilized Au NPs can impart surface enhanced Raman scattering effects in sensing of molecules, illustrating a representative use of the presented platform.

Effect of a triclosan/PVM/MA copolymer/fluoride dentifrice on volatile sulfur compounds in vitro.

PubMed

Pilch, S; Williams, M I; Cummins, D

2005-01-01

The objective of the investigation was to document the in vitro efficacy of a triclosan/PVM/MA copolymer/fluoride (TCF) dentifrice against the formation of volatile sulfur compounds (VSC) as well as the growth of H2S-producing bacteria. Clinical studies using organoleptic judges, gas chromatography, or a portable sulfide monitor have generally been employed in the assessment of treatments for the control of oral malodor. However, these studies are not appropriate for screening purposes because of the expense and time required. An in vitro method was developed for the purpose of screening new compounds, agents or formulations for their ability to control VSC formation and for determining bio-equivalence of efficacy when implementing changes in existing formulations. The method combines basic microbiological methods, dynamic flow cell techniques and head space analysis. The in vitro VSC method was validated by comparing the efficacy of two dentifrices containing TCF with a control fluoride dentifrice as the TCF products have been clinically proven to control oral malodor. In the validation studies, the TCF-containing dentifrices were significantly better (P < 0.05) than the control dentifrice in inhibiting VSC formation and reducing H(2)S-producing bacteria. For example, when compared with baseline, the TCF dentifrices reduced VSC formation between 42 and 49% compared with the control dentifrice which reduced VSC formation 3%. There was no significant difference (P > 0.05) between the two TCF dentifrice formulations. Using an in vitro breath VSC model, it has been demonstrated that two variants of a dentifrice containing triclosan, PVM/MA copolymer and fluoride have efficacy that is significantly better than a control fluoridated dentifrice and that there is no significant difference between the triclosan/PVM/MA copolymer/fluoride dentifrice variants.

Anticaries Potential of Low Fluoride Dentifrices Found in The Brazilian Market.

PubMed

Ortiz, Adriana de Cássia; Tenuta, Livia Maria Andaló; Tabchoury, Cínthia Pereira Machado; Cury, Jaime Aparecido

2016-01-01

Low-fluoride (F) dentifrices (<600 µg F/g) are widely available worldwide, but evidence to recommend the use of such dentifrices, with either regular or improved formulations, is still lacking. Therefore, the aim of this study was to evaluate the anticaries potential of low-F dentifrices found in the Brazilian market, using a validated and tested pH-cycling model. Enamel blocks were selected by surface hardness (SH) and randomized into four treatment groups (n=12): non-F dentifrice (negative control), low-F dentifrice (500 μg F/g), low-F acidulated dentifrice (550 μg F/g) and 1,100 μg F/g dentifrice (positive control). The blocks were subjected to pH-cycling regimen for 8 days and were treated 2x/day with dentifrice slurries prepared in water (1:3, w/v). The pH of the slurries was checked, and only the acidulated one had low pH. After the pH cycling, SH was again determined and the percentage of surface hardness loss was calculated as indicator of demineralization. Loosely- and firmly-bound F concentrations in enamel were also determined. The 1,100 μg F/g dentifrice was more effective than the low-F ones to reduce enamel demineralization and was the only one that differed from the non-F (p<0.05). All F dentifrices formed higher concentration of loosely-bound F on enamel than the non-F (p<0.05), but the 1,100 μg F/g was the only one that differed from the non-F in the ability to form firmly-bound F. The findings suggest that the low-F dentifrices available in the Brazilian market, irrespective of their formulation, do not have anticaries potential.

The effect of cleaning substances on the surface of denture base material.

PubMed

Žilinskas, Juozas; Junevičius, Jonas; Česaitis, Kęstutis; Junevičiūtė, Gabrielė

2013-12-11

The aim of this study was to evaluate the effect of substances used for hygienic cleaning of dentures on the surface of the denture base material. Meliodent Heat Cure (Heraeus-Kulzer, Germany) heat-polymerized acrylic resin was used to produce plates with all the characteristics of removable denture bases (subsequently, "plates"). Oral-B Complete toothbrushes of various brush head types were fixed to a device that imitated tooth brushing movements; table salt and baking soda (frequently used by patients to improve tooth brushing results), toothpaste ("Colgate Total"), and water were also applied. Changes in plate surfaces were monitored by measuring surface reflection alterations on spectrometry. Measurements were conducted before the cleaning and at 2 and 6 hours after cleaning. No statistically significant differences were found between the 3 test series. All 3 plates used in the study underwent statistically significant (p<0.05 changed)--the reflection became poorer. The plates were most affected by the medium-bristle toothbrush with baking soda--the total reflection reduction was 4.82 ± 0.1%; among toothbrushes with toothpaste, the hard-type toothbrush had the greatest reflection-reducing effect--4.6 ± 0.05%, while the toothbrush with table salt inflicted the least damage (3.5 ± 0.16%) due to the presence of rounded crystals between the bristles and the resin surface. Toothbrushes with water had a uniform negative effect on the plate surface - 3.8 9 ± 0.07%. All substances used by the patients caused surface abrasion of the denture base material, which reduced the reflection; a hard toothbrush with toothpaste had the greatest abrasive effect, while soft toothbrushes inflicted the least damage.

Effect of tooth brush abrasion and thermo-mechanical loading on direct and indirect veneer restorations.

PubMed

Rosentritt, Martin; Sawaljanow, Alexander; Behr, Michael; Kolbeck, Carola; Preis, Verena

2015-01-01

This study investigated toothbrush abrasion and in vitro aging on ceramic (indirect technique) and composite veneers (direct technique). Identical composite and individual human incisors were restored with industrially preformed composite veneers, indirectly produced ceramic veneers, and direct composite restorations. Surface roughness was determined before and after tooth brushing. A 5-year period of oral service was simulated by thermal cycling and mechanical loading (TCML). After TCML, all specimens were examined with microscopy and scanning electron microscopy. Specimens without failures during TCML were loaded until failure. analysis of variance; Bonferroni's post hoc analysis, Kaplan-Meier-Log Rank test (α = 0.05). Tooth brushing yielded a non-significant increase (p = 0.560) in roughness in all materials (industrial veneer, 0.12+/-0.07 μm, direct restoration, 0.18+/-0.14 μm, ceramic, 0.35+/-0.16 μm). No significant differences in roughness could be determined between the materials, neither before nor after testing (p < 0.001). After TCML of artificial teeth, direct and preformed composite veneers on composite teeth showed no failures or damages. Two ceramic veneers showed cracking in the labial area. After TCML of human teeth, transmission microscopy indicated a facial crack in a ceramic veneer and chipping in the cervical area of a preformed veneer. Two direct composite veneers lost retention. No significantly different survival rates were found between the three veneer groups. Fracture force on human teeth varied between 527.8+/-132.4 N (ceramic), 478.3+/-165.4 N (preformed composite), and 605.0+/-263.5 N (direct composite). All materials revealed comparable wear resistance. Indirect ceramic, direct restorative composite, and preformed composite veneers showed comparable failure rates and satisfying longevity. The results indicate similar longevity of the chosen materials for veneer restorations.

Clinical effect of a triclosan containing dentifrice on gingivitis during pregnancy and post-partum.

PubMed

Kraivaphan, Petcharat; Amornchat, Cholticha; Triratana, Terdphong; Leethochawalit, Ungkana

2006-07-01

One hundred forty pregnant women 3 months gestation were enrolled in a 9 month, double-blind clinical study to evaluate the effect of 0.3% triclosan/copolymer dentifrice on gingivitis, compared to a placebo dentifrice. Women were stratified into two balanced groups according to their baseline gingivitis scores. They then received oral prophylaxis and were assigned to use either a placebo or the triclosan dentifrice for the next 9 months. The 3, 5 and 9 month results of this study showed that the triclosan dentifrice provided statistically significant reductions in gingivitis of 19.73, 27.91and 38.45%, respectively, compared to the placebo dentifrice.

A comparative clinical study evaluating stain removal efficacy of a new sensitivity whitening dentifrice compared to commercially available whitening dentifrices.

PubMed

Hughes, Nathan; Maggio, Brenda; Sufi, Farzana; Mason, Stephen; Kleber, Carl J

2009-01-01

To assess the extrinsic stain removal efficacy of a new sensitivity dentifrice containing sodium tripolyphosphate (STP) to marketed whitening toothpastes after six weeks of product use. This was a single-center, double-blind, stratified, six-week clinical study comparing the reduction in stain area and intensity of Sensodyne Extra Whitening to Crest Maximum Strength Sensitivity Protection Whitening plus Scope and Colgate Tartar Control Plus Whitening Mint dentifrice, as measured by MacPherson's Modification of the Lobene Stain Index (MMLSI) in a forced stain model. Two-hundred and ninety-five subjects completed the study. Tooth stain MMSLI scores showed significant differences between Sensodyne and Crest dentifrices in favor of Sensodyne for all surface sites (p = 0.014), and individually for facial (p = 0.023), lingual (p = 0.027), and interproximal (p = 0.014) surfaces. No significant statistical differences between Sensodyne and Colgate dentifrices were observed for any of the surfaces. Results from this stain removal clinical study demonstrate significant extrinsic stain removal efficacy for all dentifrices relative to baseline. Significant differences between the two marketed sensitivity whitening dentifrices were demonstrated in favor of the new Sensodyne Sensitivity Whitening dentifrice.

21 CFR 355.70 - Testing procedures for fluoride dentifrice drug products.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Testing procedures for fluoride dentifrice drug... Procedures § 355.70 Testing procedures for fluoride dentifrice drug products. (a) A fluoride dentifrice drug... tests: Enamel solubility reduction or fluoride enamel uptake. The testing procedures for these...

21 CFR 355.70 - Testing procedures for fluoride dentifrice drug products.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 5 2011-04-01 2011-04-01 false Testing procedures for fluoride dentifrice drug... Procedures § 355.70 Testing procedures for fluoride dentifrice drug products. (a) A fluoride dentifrice drug... tests: Enamel solubility reduction or fluoride enamel uptake. The testing procedures for these...

Friction and wear characteristics of wire-brush skids

NASA Technical Reports Server (NTRS)

Dreher, R. C.

1979-01-01

The testing technique consisted of towing the skids with a ground test vehicle over asphalt and concrete surfaces at ground speeds up to 80 km/hr (50 mph) and bearing pressures up to 689 kPa (100 psi) over sliding distances up to 1585 m (5200 ft). Results indicate that the friction coefficient developed by wire brush skids is essentially independent of ground speed, is slightly increased with increasing bearing pressure, is noticeably affected by surface texture, and is not degraded by surface wetness. Skid wear is shown to increase with increasing bearing pressure and with increasing ground speed and is dependent on the nature of the surface. Runway surface damage caused by the skids was in the form of an abrasive scrubbing action rather than physical damage.

Evaluation of tartar control dentifrices in in vitro models of dentin sensitivity.

PubMed

Mason, S; Levan, A; Crawford, R; Fisher, S; Gaffar, A

1991-01-01

The effects of anticalculus dentifrices were compared with other commercially available dentifrices in in vitro models of dentin sensitivity. Changes in the hydraulic conductance of dentin discs were measured with and without a smear layer before and after treatment and also after a post-treatment acid etch. The capacity of dentifrices to occlude open dentinal tubules in vitro was also assessed by scanning electron microscopy (SEM). There was good correlation (R = 0.98) between our test and values reported in the literature. Tartar control dentifrices gave reductions in fluid flow rates through the dentin discs comparable to those obtained with Promise, Sensodyne, Thermodent and Denquel. Additionally, tartar control dentifrices did not remove microcrystalline debris (smear layers) from the surfaces of dentin in vitro. These results were confirmed by SEM. Thus, according to the hydrodynamic theory of dentin sensitivity, these in vitro results suggest that pyrophosphate-containing dentifrices should reduce dentinal sensitivity.

Assessment of the influence of vegetarian diet on the occurrence of erosive and abrasive cavities in hard tooth tissues.

PubMed

Herman, Katarzyna; Czajczyńska-Waszkiewicz, Agnieszka; Kowalczyk-Zając, Małgorzata; Dobrzyński, Maciej

2011-11-25

The aim of the study was to determine the potential relation between vegetarian diet and tooth erosion and abrasion. The examination included 46 vegetarians and the same number in the control group. Clinical research was carried out in order to detect the presence of abrasive and erosive changes and the level of hygiene in oral cavities. The questionnaire survey concerned dietary and hygienic habits. Statistical analysis of the data was conducted with Chi-square test and Mann-Whitney U test. The relations between following a vegetarian diet and the occurrence of non-carious cavities was tested with models of logistic regression. Tooth erosion was present among 39.1% of vegetarians and 23.9% of controls, while abrasion appeared among 26.1% and 10.9%, respectively, and the differences were statistically insignificant. The distribution of the changes was similar in both groups. Among vegetarians, significantly more frequent consumption of sour products (predominantly raw vegetables and fruit and tomatoes) was observed. The level of oral hygiene and hygienic habits were similar in both groups. The analysis of statistical regression did not reveal any relations between following a vegetarian diet and the occurrence of tooth erosion and abrasion. The results did not reveal any direct influence of vegetarian diet on the occurrence of erosive and abrasive changes. However, in the vegetarian group, more frequent consumption of some sour products and more commonly used horizontal brushing method were observed, with a slightly higher occurrence of non-carious cavities. Further research is required to obtain unambiguous conclusions.

21 CFR 355.70 - Testing procedures for fluoride dentifrice drug products.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 5 2014-04-01 2014-04-01 false Testing procedures for fluoride dentifrice drug... SERVICES (CONTINUED) DRUGS FOR HUMAN USE ANTICARIES DRUG PRODUCTS FOR OVER-THE-COUNTER HUMAN USE Testing Procedures § 355.70 Testing procedures for fluoride dentifrice drug products. (a) A fluoride dentifrice drug...

21 CFR 355.70 - Testing procedures for fluoride dentifrice drug products.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 5 2012-04-01 2012-04-01 false Testing procedures for fluoride dentifrice drug... SERVICES (CONTINUED) DRUGS FOR HUMAN USE ANTICARIES DRUG PRODUCTS FOR OVER-THE-COUNTER HUMAN USE Testing Procedures § 355.70 Testing procedures for fluoride dentifrice drug products. (a) A fluoride dentifrice drug...

21 CFR 355.70 - Testing procedures for fluoride dentifrice drug products.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 5 2013-04-01 2013-04-01 false Testing procedures for fluoride dentifrice drug... SERVICES (CONTINUED) DRUGS FOR HUMAN USE ANTICARIES DRUG PRODUCTS FOR OVER-THE-COUNTER HUMAN USE Testing Procedures § 355.70 Testing procedures for fluoride dentifrice drug products. (a) A fluoride dentifrice drug...

A Randomized Clinical Study to Evaluate the Effect of Two Experimental Toothpastes on Tooth Enamel Gloss and Smoothness.

PubMed

Milleman, Kimberly R; Milleman, Jeffery L; Creeth, Jonathan E; Butler, Andrew; Bosma, Mary Lynn

2016-03-01

The study compared the effects on examiner-assessed tooth gloss and smoothness of two experimental toothpastes (1% or 2% alumina abrasive) with a reference, silica-based toothpaste used twice daily for one, four, and eight weeks. The study also monitored the safety of the products. This was a randomized, examiner-blind study, stratified by gloss score and age, three-treatment, parallel-group using healthy adult volunteers. Following a two-week washout period where subjects brushed with a conventional silica-abrasive toothpaste, 169 subjects began the trial period after receiving a dental scaling and polishing using the washout toothpaste. Subjects brushed for two minutes, twice daily, with their assigned toothpaste. The experimental toothpastes contained 927 ppm fluoride as NaF with either 1% or 2% alumina as the sole abrasive. The reference toothpaste contained 927 ppm fluoride as NaF in a conventional amorphous silica abrasive base. Enamel polish (i.e., gloss) was assessed visually by comparing the facial surfaces of the maxillary incisors with a set of standards. Tooth smoothness was assessed by lightly dragging a dental explorer over the surface. Subjects using the 2% alumina toothpaste had significantly higher gloss compared to the reference toothpaste at Weeks 1 and 4, but the difference was of borderline significance at Week 8 (one-covariate analysis: p = 0.0529; two-covariate analysis: p = 0.0494). Subjects using the 1% alumina toothpaste had significantly higher gloss improvement scores than the reference toothpaste at Weeks 4 and 8, but not at Week 1. All three treatment groups' gloss scores improved during the study. Regarding tooth smoothness, the effects of the experimental toothpastes followed a broadly similar profile to the effects on tooth gloss. After four weeks' use, both experimental toothpastes were superior to the reference. After eight weeks' use, however, only the 2% alumina toothpaste approached significant superiority versus the reference (p = 0.0639). The 1% and 2% alumina toothpastes improved tooth gloss compared to a standard silica toothpaste when used twice daily for two minutes over an eight-week study period. Furthermore, there was evidence of a corresponding increase in tooth smoothness.

The effect of a fluoride dentifrice containing an anticalculus agent on dental caries in children.

PubMed

Lu, K H; Yen, D J; Zacherl, W A; Ruhlman, C D; Sturzenberger, O P; Lehnhoff, R W

1985-01-01

In this double-blind caries study, 1160 Taiwanese children (ages 8-15) completed a program using a test dentifrice containing 1.243 percent sodium fluoride and soluble pyrophosphates, or a control dentifrice without these agents. The average reduction of new carious tooth surfaces was 39 percent with the sodium fluoride dentifrice.

A three-year clinical comparison of a sodium monofluorophosphate dentifrice with sodium fluoride dentifrices on dental caries in children.

PubMed

Lu, K H; Ruhlman, C D; Chung, K L; Sturzenberger, O P; Lehnhoff, R W

1987-01-01

This study compared the anticaries effects of these three fluoride-containing dentifrices: 1100 ppm F as NaF (positive control); 2800 ppm F as SMFP; and 2800 ppm F as NaF. The group using the 2800 SMFP dentifrice showed no significant differences in DMFS or DMFT, compared to the positive control, at anytime during the study. This indicated that higher levels of sodium monofluorophosphate in a dentifrice offer no advantage in caries protection over the conventional level of sodium fluoride, 1100 ppm F.

In vitro wear of new indirect resin composites.

PubMed

Jain, V; Platt, J A; Moore, B K; Borges, G A

2009-01-01

This in vitro study evaluated the toothbrush abrasion wear, three-body Alabama wear and two-body pin-on-disc wear of four commercial indirect resin composites. Enamel shades of Radica (R), Sculpture Plus (S), Belleglass-NG (B) and Gradia Indirect (G) were used. For measuring wear due to toothbrush abrasion, six specimens of each group were fabricated, then brushed in a toothbrush abrasion machine for 20,000 cycles. Material loss was determined by weighing and conversion to volume loss. Three-body wear was measured on six samples for each group using an Alabama-type wear testing machine for 400,000 cycles. Wear depth was measured with a contact profilometer. For two-body wear, five disc specimens were prepared and tested in a two-body wear-testing machine against hydroxypatite sliders for 25,000 cycles. Data were analyzed with one-way analysis of variance (ANOVA) and Tukey test (alpha=0.05). Wear was the highest in Sculpture Plus by all three methods tested and the lowest wear was observed in Belleglass-NG. No statistical difference in wear was noted from Radica.

Toothpaste Prevents Debonded Brackets on Erosive Enamel

PubMed Central

Barros, Érico Luiz Damasceno; Pinto, Shelon Cristina Souza; Borges, Alvaro Henrique; Tonetto, Mateus Rodrigues; Ellwood, Roger Phillip; Pretty, Ian; Bandéca, Matheus Coelho

2015-01-01

This study evaluated the effect of high fluoride dentifrice on the bond strength of brackets after erosive challenge. Eighty-four enamel specimens were divided into seven groups (n = 12): WN (distilled water/no acid challenge), W3C (distilled water/3 cycles of acid challenge), and W6C (distilled water/6 cycles of acid challenge) were not submitted to dentifrice treatment. Groups RF3C (regular fluoride dentifrice/3 cycles of acid challenge) and RF6C (regular fluoride dentifrice/6 cycles of acid challenge) were treated with dentifrices containing 1450 μg F−/g and HF3C (high fluoride dentifrice/3 cycles of acid challenge) and HF6C (high fluoride dentifrice/6 cycles of acid challenge) were with 5000 μg F−/g. Acid challenges were performed for seven days. After bond strength test, there was no significant difference among groups submitted to 3 cycles of acid challenge (P > 0.05). Statistically significant difference was found between the regular and high fluoride dentifrices after 6 cycles of acid challenge (<0.05). Similar areas of adhesive remaining were found among control groups and among groups W6C, RF3C, RF6C, HF3C, and HF6C. The high fluoride dentifrice was able to prevent the reduction of bond strength values of brackets submitted to acid challenge. Clinical relevance: the high fluoride toothpaste prevents debonded brackets on erosive enamel. PMID:25879058

The antimicrobial efficacy of commercial dentifrices.

PubMed

Haraszthy, Violet I; Zambon, Joseph J; Sreenivasan, Prem K

2010-01-01

This investigation compared the effects of a fluoride dentifrice and toothpastes formulated with antimicrobial ingredients (stannous fluoride and triclosan/copolymer) on oral micro-organisms, including those found in samples taken from the human oral cavity. Microbiological techniques determined the minimum inhibitory concentrations (MICs) of each dentifrice necessary to inhibit the growth of bacterial strains from the healthy oral cavity, as well as those found in dental caries, periodontal disease, and halitosis. Ex vivo studies utilized oral rinse samples and supragingival plaque from adults to determine antimicrobial effects on the entire microbial diversity of these samples, including biofilm-derived micro-organisms. The triclosan/copolymer dentifrice demonstrated the lowest MICs and significantly inhibited Gram-positive and Gram-negative bacteria (including the periodontal pathogens Aggregatibacter actinomycetemcomitans, Eikenella corrodens, and Fusobacterium nucleatum). In the ex vivo tests, the triclosan/copolymer dentifrice demonstrated substantial inhibition in the oral rinse samples over each treatment period (p > 0.0005) as compared to either the fluoride or stannous fluoride dentifrices. Similarly, the triclosan/copolymer dentifrice demonstrated the highest inhibition of micro-organisms in the supragingival plaque biofilm (p < 0.0005). No significant differences were observed between the fluoride and stannous fluoride dentifrices (p > 0.5).

ENHANCING REMINERALIZATION OF PRIMARY ENAMEL LESIONS WITH FLUORIDE DENTIFRICE CONTAINING TRICALCIUM PHOSPHATE.

PubMed

Rirattanapong, Praphasri; Vongsavan, Kadkao; Saengsirinavin, Chavengkiat; Waidee, Sumana

2017-03-01

Fluoride dentifrice is effective in preventive dental caries but may cause fluorosis, especially in young children. Reducing the concentration of fluoride from the regular concentration of 1,000 parts per million (ppm) to 500 ppm can reduce the risk for fluorosis but increases the risk of caries. Adding tricalcium phosphate (TCP) to the dentifrices may improve the efficacy of remineralization possibly allowing for a lower concentration of fluoride to reduce the risk of fluorosis. We studied this to inform future caries prevention efforts in children. We immersed 40 sound primary incisors into demineralizing solution (pH=4.4) for 96 hours at 37°C to create demineralized lesions. The 40 teeth were then divided into 4 groups of 10 teeth each. Group A: control (treated with deionized water only); Group B: treated with fluoride dentifrice at a concentration of 1,000 ppm; Group C: treated with fluoride dentifrice at a concentration of 500 ppm and 500 ppm TCP, and Group D: treated with fluoride dentifrice at a concentration of 1,000 ppm and 500 ppm TCP. The teeth were each subjected to 7 days of pH-cycling and the studied dentifrice was applied for one minute, 3 times daily during the 7 day period. After the 7 day period the teeth were each sectioned and examined with polarized light microscopy. The depths of demineralized areas were measured using Image-Pro plus software. A pair t-test was used to compare lesion depths before and after dentifrice treatment. Differences in mean lesion depths within each group were analyzed using the One-way ANOVA and LSD tests; a 95% confidence intervals were calculated. The mean lesion depths in all the groups before dentifrice treatment were not significantly different (p=0.143). The mean demineralized lesion depths after dentifrice treatment were significantly different by group (p=0.00). The mean demineralized lesion depth in Group A significantly deeper than the other groups (p=0.00). Group D had the shallowest depth, significantly shallower than the other groups (p=0.006). There was no significant difference in the mean demineralized lesion depth between Groups B and C (p=0.478). The mean demineralized lesion depth changed significantly after dentifrice treatment in all the groups (p=0.00). Group A was significantly deeper (p=0.00) and groups B, C and D were all significantly shallow. Group D had the greatest reduction in mean demineralized lesion depth (p<0.05). The 1,000 ppm fluoride plus TCP dentifrice gave superior remineralization than the 500 ppm fluoride plus TCP and the 1,000 ppm fluoride dentifrice. The 500 ppm fluoride plus TCP gave the same remineralizing effect as the 1,000 ppm fluoride dentifrice. TCP enhances remineralization on primary enamel when added to fluoride dentifrice. Our results show if TCP is added to fluoride dentifrice a lower concentration of fluoride is needed to provide the same benefit as fluoride dentifrice with a higher concentration of fluoride, reducing the risk of fluorosis in children.

Discovery Served Up in a Bowl

NASA Technical Reports Server (NTRS)

2004-01-01

This image from the Mars Exploration Rover Opportunity's panoramic camera is an approximate true-color rendering of the exceptional rock called 'Berry Bowl' in the 'Eagle Crater' outcrop. The study of this 'blueberry-strewn' area and the identification of hematite as the major iron-bearing element within these sphere-like grains helped scientists confirm their hypothesis that the hematite in these martian spherules was deposited in water. To separately analyze the mineralogical content of three main features within this area -- blueberries, dust and rock -- it was important that the rock abrasion tool's brush was able to rest on a relatively berry-free spot. The rock's small size and crowd of berries made the 10-minute brushing a challenge to plan and execute. The successful brushing on the target whimsically referred to as 'Near Empty' on the rover's 48th sol on Mars left a dust-free impression for subsequent examination by the rover's spectrometers. No grinding was necessary on the rock because spectral data obtained on the dust-free surface were sufficient to verify that the rock's chemical composition differs significantly from the hematite-rich berries.

The effects of a new therapeutic triclosan/copolymer/sodium-fluoride dentifrice on oral bacteria, including odorigenic species.

PubMed

Furgang, David; Sreenivasan, Prem K; Zhang, Yun Po; Fine, Daniel H; Cummins, Diane

2003-09-01

This investigation examined the in vitro and ex vivo antimicrobial effects of a new dentifrice, Colgate Total Advanced Fresh, formulated with triclosan/copolymer/sodium fluoride, on oral bacteria, including those odorigenic bacteria implicated in bad breath. The effects of Colgate Total Advanced Fresh were compared to commercially available fluoride dentifrices that served as controls. Three experimental approaches were undertaken for these studies. In the first approach, the dentifrice formulations were tested in vitro against 13 species of oral bacteria implicated in bad breath. The second approach examined the antimicrobial activity derived from dentifrice that was adsorbed to and released from hydroxyapatite disks. In this approach, dentifrice-treated hydroxyapatite disks were immersed in a suspension of bacteria, and reduction in bacterial viability from the release of bioactive agents from hydroxyapatite was determined. The third approach examined the effect of treating bacteria immediately after their removal from the oral cavity of 11 adult human volunteers. This ex vivo study examined the viability of cultivable oral bacteria after dentifrice treatment for 2 minutes. Antimicrobial effects were determined by plating Colgate Total Advanced Fresh and control-dentifrice-treated samples on enriched media (for all cultivable oral bacteria) and indicator media (for hydrogen-sulfide-producing organisms), respectively. Results indicated that the antimicrobial effects of Colgate Total Advanced Fresh were significantly greater than either of the other dentifrices for all 13 oral odorigenic bacterial strains tested in vitro (P < or = 0.05). In the second approach, Colgate Total Advanced Fresh-treated hydroxyapatite disks were significantly more active in reducing bacterial growth than the other dentifrices tested (P < or = 0.05). Finally, ex vivo treatment of oral bacteria with Colgate Total Advanced Fresh demonstrated a 90.9% reduction of all oral cultivable bacteria and a 91.5% reduction of oral bacteria producing hydrogen sulfide compared with the control dentifrice. In conclusion, these results, taken together with the significant reductions in clinical malodor scores by Colgate Total Advanced Fresh demonstrated in organoleptic studies, strongly suggest that this dentifrice kills the bacteria that are implicated in the cause of bad breath.

Spirit Studies Rock Outcrop at 'Home Plate'

NASA Technical Reports Server (NTRS)

2006-01-01

NASA's Mars Exploration Rover Spirit acquired this false-color image at 11:48 local true solar time on Mars on the rover's 746th Martian day, or sol (Feb. 26, 2006), after using the rock abrasion tool to brush the surfaces of rock targets informally named 'Stars' (left) and 'Crawfords' (right). Small streaks of dust extend for several centimeters behind the small rock chips and pebbles in the dusty, red soils. Because the rover was looking southwest when this image was taken, the wind streaks indicate that the dominant wind direction was from the southeast.

The targets Stars and Crawfords are on a rock outcrop located on top of 'Home Plate.' The outcrop is informally named 'James 'Cool Papa' Bell,' after a Negro Leagues Hall of Famer who played for both the Pittsburgh Crawfords and the Kansas City Stars. To some science team members, the two brushed spots resemble the eyes of a face, with rocks below and between the eyes as a nose and layered rocks at the bottom of the image as a mouth.

The image combines frames taken by Spirit's panoramic camera through the camera's 753-nanometer, 535-namometer, and 432-nanometer filters. It is enhanced to emphasize color differences among the rocks, soils and brushed areas. The blue circular area on the left, Stars, was brushed on 761 (Feb. 22, 2006). The one on the right, Crawfords, was brushed on sol 763 (Feb. 25, 2006).

Combination effect of fluoride dentifrices and varnish on deciduous enamel demineralization.

PubMed

Gatti, Alessandra; Camargo, Lucila Basto; Imparato, José Carlos Pettorossi; Mendes, Fausto Medeiros; Raggio, Daniela Prócida

2011-01-01

The aim of this study was to evaluate the anticaries potential of 500 or 1100 ppm F dentifrices combined with fluoride varnish using a pH-cycling regimen. Seventy primary canines were covered with nail polish, leaving a 4×4 mm window on their buccal surface, and randomly assigned into 7 groups (n = 10): S: sound enamel not submitted to the pH-cycling regimen or treatment; N: negative control, submitted to the pH-cycling regimen without any treatment; D1 and D2: subjected to the pH-cycling regimen and treated twice daily with 1100 or 500 ppm F dentifrice, respectively; VF: fluoride varnish (subjected to F-varnish before and in the middle of the pH-cycling regimen); and VF+D1 and VF+D2. After 10 days, the teeth were sectioned, and enamel demineralization was assessed by cross-sectional hardness at different distances from the dental surface. Data were analyzed using a two-way ANOVA followed by Tukey's test. Dentifrice with 1100 ppm F and the combination of F-varnish with the dentifrices significantly reduced enamel demineralization compared with the negative control (p < 0.05), but the isolated effects of F-varnish and dentifrice with low concentration were not significant (p > 0.05). The effect of combining F-varnish with the dentifrices was not greater than the effect of the dentifrices alone (p < 0.05). The data suggest that the combination of F-varnish with dentifrices containing 500 and 1100 ppm F is not more effective in reducing demineralization in primary teeth than the isolated effect of dentifrice containing 1100 ppm F.

A randomised clinical study to measure the anti-erosion benefits of a stannous-containing sodium fluoride dentifrice

PubMed Central

West, Nicola; Seong, Joon; Macdonald, Emma; He, Tao; Barker, Matthew; Hooper, Susan

2015-01-01

Background: To compare the enamel protection efficacy of stannous-containing sodium fluoride and sodium monofluorophosphate (MFP)/triclosan dentifrices marketed in India in an in situ erosion model with acidic challenge. Materials and Methods: This randomised and controlled, in situ, supervised, double-blind clinical trial employed a two-treatment, four-period crossover design, wherein subjects wore an appliance fitted with human enamel samples 6 h/day during each 10 day treatment period and swished twice daily with their assigned dentifrice slurry: Oral-B® Pro-Health (maximum 1,000 ppm F as sodium fluoride with stannous chloride) or Colgate® Strong Teeth with Cavity Protection (maximum 1,000 F as sodium MFP and triclosan). Subjects swished with 250 ml of orange juice over a 10 min period after each treatment and twice daily for the acidic erosive challenge. Enamel samples were measured for tooth surface loss using contact profilometry at baseline and day 10. Results: A total of 34 subjects were randomised to treatment; 32 subjects completed the final visit. Baseline profilometry measurements of the specimen surfaces were near zero within ± 0.3 μm, and no statistically significant difference (P > 0.48) on average was observed between the two test dentifrices. At day 10, the stannous-containing dentifrice demonstrated 88% less erosion (P < 0.0001) relative to the MFP/triclosan dentifrice. Estimated medians (95% confidence intervals) were 0.21 μm (0.17, 0.25) for the stannous-containing dentifrice versus 1.66 μm (1.39, 1.99) for the MFP/triclosan dentifrice. Both dentifrices were well-tolerated. Conclusions: Compared with MFP/triclosan toothpaste, a stabilised stannous-containing sodium fluoride dentifrice gave statistically significantly greater protection against tooth enamel surface loss in situ following repeated acid erosive challenge. PMID:26015669

Fingernail may not be a reliable biomarker of fluoride body burden from dentifrice.

PubMed

Lima-Arsati, Ynara Bosco Oliveira; Martins, Carolina Castro; Rocha, Lília Alves; Cury, Jaime Aparecido

2010-01-01

Fingernail has been suggested as a biomarker of fluoride (F) body burden, but there is no consensus if it would be a reliable indicator of F exposure from dentifrice. Therefore, the present study was conducted to investigate if fingernails would have sensitivity to detect F exposure from dentifrice in young children. Twenty-three 1-3-year-old children living in the city of Piracicaba (0.72 ppm F in water), Brazil, were enrolled in two phases of different F exposure: in phase A (1st to 11th week), they were exposed to the combination of F from diet (solids and liquids) and dentifrice (1,500 microg F/g as MFP), and in phase B (12th to 29th week), only to F from diet (the use of F dentifrice was interrupted). Fingernails were weekly clipped during 35 weeks for F determination. F intake from diet and dentifrice in each phase was also determined. Both analyses were made with ion-specific electrode. F intake (Mean +/- SD) was significantly higher (p<0.01) when the children were exposed to F from diet+dentifrice than only to F from diet (0.086 +/- 0.032 and 0.040 +/- 0.009 mg F/day/kg body weight, respectively). However, F concentrations in nails collected during the whole experimental period of 35 weeks presented great variation with no trend of decreasing after F dentifrice intake interruption. The findings suggest that fingernail may not be a reliable F biomarker of body burden from dentifrice.

Remineralization effects of two pediatric dentifrices and one regular dentifrice on artificial carious lesion in primary teeth: An in vitro study

PubMed Central

Advani, Shweta; Sogi, Suma; Hugar, Shivayogi; Indushekar, K. R.; Kiran, K.; Hallikerimath, Seema

2014-01-01

Aim: The aim of the following study is to know the efficacy of remineralization of two pediatric dentifrices and one regular dentifrice on artificial carious lesions in primary teeth. Materials and Methods: A total of 21 teeth coated with nail varnish leaving a window of 1 mm were subjected to demineralization for 72 h. These 21 teeth were then sectioned into two equal parts with a diamond disc. The 42 sections obtained were then evaluated under the stereomicroscope and the demineralization values were noted. The 42 sections were divided into three groups: Group 1: Kidodent, Group 2: Cheeriogel, Group 3: Colgate Total and subjected to remineralization respectively for 7 days. The specimens were again evaluated under the stereomicroscope for the remineralisation values. Results: All the three dentifrices showed remineralization with artificial carious lesions. Colgate Total showed higher remineralization rates compared with the other two pediatric dentifrices. Kidodent showed a slightly higher remineralisation rate compared with Cheeriogel which was not significant. Conclusion/Hypothesis: The pediatric dentifrices also showed remineralization with artificial carious lesions. Hence, we conclude that, this amount of remineralization was more or less, when compared to the regular dentifrice which showed higher remineralization rates, which could lead to adverse effects, like fluorosis if not used judiciously. On basis of which we hypothetize: Pediatric dentifrices have an appropriate fluoride content, as required by the children, and also does not minimize the cariostatic effects. PMID:25254193

APF and dentifrice effect on root dentin demineralization and biofilm.

PubMed

Vale, G C; Tabchoury, C P M; Del Bel Cury, A A; Tenuta, L M A; ten Cate, J M; Cury, J A

2011-01-01

Because dentin is more caries-susceptible than enamel, its demineralization may be more influenced by additional fluoride (F). We hypothesized that a combination of professional F, applied as acidulated phosphate F (APF), and use of 1100-ppm-F dentifrice would provide additional protection for dentin compared with 1100-ppm-F alone. Twelve adult volunteers wore palatal appliances containing root dentin slabs, which were subjected, during 4 experimental phases of 7 days each, to biofilm accumulation and sucrose exposure 8x/day. The volunteers were randomly assigned to the following treatments: placebo dentifrice (PD), 1100-ppm-F dentifrice (FD), APF + PD, and APF+FD. APF gel (1.23% F) was applied to the slabs once at the beginning of the experimental phase, and the dentifrices were used 3x/day. APF and FD increased F concentration in biofilm fluid and reduced root dentin demineralization, presenting an additive effect. Analysis of the data suggests that the combination of APF gel application and daily regular use of 1100-ppm-F dentifrice may provide additional protection against root caries compared with the dentifrice alone.

Pop-cola acids and tooth erosion: an in vitro, in vivo, electron-microscopic, and clinical report.

PubMed

Borjian, Amirfirooz; Ferrari, Claudia C F; Anouf, Antoni; Touyz, Louis Z G

2010-01-01

Introduction. Manufactured Colas are consumed universally as soft drinks. Evidence about the acid contents of Cola-beverages and its effects on teeth is rare. Aim. To assess (i) cola acidity and buffering capacity in vitro, (ii) tooth erosion after swishing with colas in vivo (iii) scanning electron microscopic effects on teeth of colas, and tooth-brush abrasion, and (iv) report a clinical case of erosion from cola consumption. Materials and Methods. (i) We measured six commercially available pop "Cola beverages", pH, and buffering capacities using a pH-Mettler Automatic Titrator, with weak solution of Sodium Hydroxide (ii) two cohorts, one with teeth, the second without teeth rinsed with aliquots of Cola for 60 seconds. Swished cola samples tested for calcium and phosphorus contents using standardized chemical analytical methods (iii) enamel, dentine, and the enamel-cemental junction from unerupted extracted wisdom teeth were examined with a scanning electron microscope after exposure to colas, and tested for tooth-brush abrasion; (iv) a clinical case of pop cola erosion presentation, are all described. Results. Comparisons among pop colas tested in vitro reveal high acidity with very low pH. Buffering capacities in millilitres of 0.5 M NaOH needed to increase one pH unit, to pH 5.5 and pH 7 are reported. Rinsing in vivo with pop cola causes leeching of calcium from teeth; SEM shows dental erosion, and pop-cola consumption induces advanced dental erosion and facilitates abrasion. Conclusions. (i) Pop-Cola acid activity is below the critical pH 5.5 for tooth dissolution, with high buffering capacities countering neutralization effects of saliva; (ii) calcium is leeched out of teeth after rinsing with pop colas; (iii) SEM evidence explains why chronic exposure to acid pop colas causes dental frangibles; (iv) a clinical case of pop-cola erosion confirms this.

Pop-Cola Acids and Tooth Erosion: An In Vitro, In Vivo, Electron-Microscopic, and Clinical Report

PubMed Central

Borjian, Amirfirooz; Ferrari, Claudia C. F.; Anouf, Antoni; Touyz, Louis Z. G.

2010-01-01

Introduction. Manufactured Colas are consumed universally as soft drinks. Evidence about the acid contents of Cola-beverages and its effects on teeth is rare. Aim. To assess (i) cola acidity and buffering capacity in vitro, (ii) tooth erosion after swishing with colas in vivo (iii) scanning electron microscopic effects on teeth of colas, and tooth-brush abrasion, and (iv) report a clinical case of erosion from cola consumption. Materials and Methods. (i) We measured six commercially available pop “Cola beverages”, pH, and buffering capacities using a pH-Mettler Automatic Titrator, with weak solution of Sodium Hydroxide (ii) two cohorts, one with teeth, the second without teeth rinsed with aliquots of Cola for 60 seconds. Swished cola samples tested for calcium and phosphorus contents using standardized chemical analytical methods (iii) enamel, dentine, and the enamel-cemental junction from unerupted extracted wisdom teeth were examined with a scanning electron microscope after exposure to colas, and tested for tooth-brush abrasion; (iv) a clinical case of pop cola erosion presentation, are all described. Results. Comparisons among pop colas tested in vitro reveal high acidity with very low pH. Buffering capacities in millilitres of 0.5 M NaOH needed to increase one pH unit, to pH 5.5 and pH 7 are reported. Rinsing in vivo with pop cola causes leeching of calcium from teeth; SEM shows dental erosion, and pop-cola consumption induces advanced dental erosion and facilitates abrasion. Conclusions. (i) Pop-Cola acid activity is below the critical pH 5.5 for tooth dissolution, with high buffering capacities countering neutralization effects of saliva; (ii) calcium is leeched out of teeth after rinsing with pop colas; (iii) SEM evidence explains why chronic exposure to acid pop colas causes dental frangibles; (iv) a clinical case of pop-cola erosion confirms this. PMID:21151663

Chlorhexidine mouthwash and sodium lauryl sulphate dentifrice: do they mix effectively or interfere?

PubMed

Elkerbout, T A; Slot, D E; Bakker, E W P; Van der Weijden, G A

2016-02-01

What is the effectiveness of a chlorhexidine (CHX) mouthwash used in combination with a sodium lauryl sulphate (SLS) dentifrice on the parameters of plaque and gingivitis? MEDLINE-PubMed, Cochrane-CENTRAL, EMBASE and other electronic databases were searched up to July 2014. The inclusion criteria were (randomized) controlled clinical trials, subjects ≥18 years of age with good general health. Papers evaluating the effect of CHX mouthwash used in combination with SLS dentifrice or a dentifrice slurry compared with CHX mouthwash as a single oral hygiene intervention or in combination with an SLS-free dentifrice were included. From the eligible studies, data were extracted, and a meta-analysis was performed when feasible. Independent screening of 83 unique papers resulted in four eligible publications, with nine comparisons. The meta-analysis showed that when an SLS dentifrice was used as a slurry rinse, the interference on the plaque-inhibiting effect of a CHX mouthwash was significantly decreased (MD 0.33; P ≤ 0.00001; 95% CI: <0.24; 0.42>). No significant difference was observed when SLS dentifrice was applied as a paste in combination with CHX mouthwash (MD 0.08; P = 0.42; 95% CI: <-0.26; 0.11>). Descriptive and subgroup analyses support these findings. Moreover, the observed effect for the dentifrice paste occurred regardless of the order of use. This review demonstrates that when CHX mouthwash is recommended, it can be used in combination with an SLS dentifrice without any interference regarding its inhibiting effect on dental plaque, regardless of the order of use. Consequently, the collective evidence indicates that the combined use of dentifrice and CHX mouthwash is not contraindicated. However, this recommendation has been graded as moderate taking into account a potential publication bias because three of the four included studies emerged from the same research group. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Outer Appearances Can Be Deceiving

NASA Technical Reports Server (NTRS)

2004-01-01

This graph shows the chemical composition of the rock at Gusev Crater dubbed 'Mazatzal' after it was brushed and ground by the Mars Exploration Rover Spirit's rock abrasion tool. The data, taken by the rover's alpha particle X-ray spectrometer over the last few sols, show that the amount of chlorine and sulfur tri-oxide in Mazatzal first increased after brushing, then diminished after grinding. The interior of the rock appears to have the same chemical make-up as other volcanic or basalt rocks studied in the Gusev Crater area ('Adirondack' and 'Humphrey'). Its outer coating or rind, on the other hand, appears to be of a different constitution. Scientists are still puzzling out the implications of these data.

The larger symbols on the graph represent inferred rock compositions, while the smaller symbols are actual data points. Observations were made at the target dubbed 'New York' on Mazatzal.

Efficacy and mechanisms of non-antibacterial, chemical plaque control by dentifrices--an in vitro study.

PubMed

Busscher, Henk J; White, Don J; Atema-Smit, Jelly; van der Mei, Henny C

2007-04-01

The provision of antiplaque benefits to dentifrices assists patients in improving hygiene and reducing susceptibility to gingivitis and caries. Chemical plaque control involves different mechanisms and is mostly associated with antibacterial effects, but also includes effects on pellicle surface chemistry to improve cleansing or discourage renewed plaque formation. It is the aim of this paper to analyze in vitro detachment of co-aggregating oral actinomyces and streptococci from pellicle surfaces by dentifrice supernates and to study subsequent de novo streptococcal deposition. Detachment by dentifrices of a co-adhering bacterial pair was studied in the parallel plate flow chamber on a 16 h pellicle coated surface. After detachment by perfusing the chamber with a dentifrice, re-deposition was initiated by flowing with a fresh streptococcal suspension. The dentifrices included both a regular, SLS-fluoride based formulation as well a pyrophosphate, anticalculus and antimicrobial formulations. All dentifrice supernates containing SLS were effective in detaching co-adhering bacteria from pellicles surfaces, except in combination with SnF(2). When hexametaphosphate was added immediate detachment was relatively low, but continued even during re-deposition. The re-deposition of streptococci after detachment by other, NaF containing dentifrices involved relatively few large aggregates, presumably because fluoride was able to block bi-dentate calcium binding sites on the bacterial cell surfaces, mediating co-adhesion. When pyrophosphate was present in addition to NaF, re-deposition involved significantly more large aggregates, likely because pyrophosphate served as a bi-dentate bridge between calcium bound on the bacterial cell surfaces. Commercially available dentifrice formulations differ in their ability to stimulate bacterial detachment from pellicles and dependent on their composition yield the formation of large co-adhering aggregates of actinomyces and streptococci in de novo deposition.

Effect of low-fluoride dentifrices supplemented with calcium glycerophosphate on enamel demineralization in situ.

PubMed

do Amaral, Jackeline Gallo; Sassaki, Kikue Takebayashi; Martinhon, Cleide Cristina Rodrigues; Delbem, Alberto Carlos Botazzo

2013-04-01

To evaluate whether a low-fluoride dentifrice with calcium glycerophosphate (CaGP) reduced the demineralization process in situ. A cross-over design with four treatment phases of 7 days each was used. Ten volunteers wore palatal devices containing four blocks of bovine dental enamel. The enamel was treated (ex-vivo) with a placebo, 500 microg-F/g (500), 500 microg-F/g with 0.25%CaGP (500 CaGP), and 1,100 microg-F/g (1,100) dentifrices (twice a day/1 minute) under cariogenic challenge from sucrose solution. To evaluate mineral loss, surface and cross-sectional hardness were performed. The fluoride, calcium, and phosphorus ion concentrations from enamel and dental plaque were determined. The insoluble extracellular polysaccharide (EPS) concentrations were also analyzed. The data were submitted to ANOVA (1-way) followed by the Student-Newman-Keuls test (P < 0.05). The mineral loss and EPS concentration were lowest in the 500 CaGP and 1,100 dentifrice groups. The use of the 500 CaGP and 1,100 dentifrices resulted in similar fluoride, calcium, and phosphorus concentrations in the enamel and in dental plaque (P > 0.05). The ionic activities of calcium phosphate phases for the 500 CaGP and 1,100 dentifrices were similar (P > or = 0.492). The low-fluoride dentifrice with 0.25%CaGP demonstrated efficacy similar to that of the positive control (1,100 dentifrice) with respect to in situ demineralization.

Drilling and Caching Architecture for the Mars2020 Mission

NASA Astrophysics Data System (ADS)

Zacny, K.

2013-12-01

We present a Sample Acquisition and Caching (SAC) architecture for the Mars2020 mission and detail how the architecture meets the sampling requirements described in the Mars2020 Science Definition Team (SDT) report. The architecture uses 'One Bit per Core' approach. Having dedicated bit for each rock core allows a reduction in the number of core transfer steps and actuators and this reduces overall mission risk. It also alleviates the bit life problem, eliminates cross contamination, and aids in hermetic sealing. An added advantage is faster drilling time, lower power, lower energy, and lower Weight on Bit (which reduces Arm preload requirements). To enable replacing of core samples, the drill bits are based on the BigTooth bit design. The BigTooth bit cuts a core diameter slightly smaller than the imaginary hole inscribed by the inner surfaces of the bits. Hence the rock core could be much easier ejected along the gravity vector. The architecture also has three additional types of bits that allow analysis of rocks. Rock Abrasion and Brushing Bit (RABBit) allows brushing and grinding of rocks in the same was as Rock Abrasion Tool does on MER. PreView bit allows viewing and analysis of rock core surfaces. Powder and Regolith Acquisition Bit (PRABit) captures regolith and rock powder either for in situ analysis or sample return. PRABit also allows sieving capabilities. The architecture can be viewed here: http://www.youtube.com/watch?v=_-hOO4-zDtE

Long-term effect of the combined use of powered toothbrush and triclosan dentifrice in periodontal maintenance patients.

PubMed

Bogren, Anna; Teles, Ricardo P; Torresyap, Gay; Haffajee, Anne D; Socransky, Sigmund S; Jönsson, Kerstin; Wennström, Jan L

2008-02-01

To test the hypothesis of a superior clinical and microbiological effect of the combined use of powered toothbrush+triclosan-containing dentifrice compared with manual toothbrush+regular fluoride-containing dentifrice in periodontal maintenance patients. A total of 128 periodontitis subjects involved in recall programmes were randomized to use either powered toothbrush with triclosan-dentifrice (test) or manual toothbrush and standard dentifrice (control). Supportive periodontal treatment was provided at baseline and every 6 months. Plaque, bleeding on probing (BoP), probing pocket depth (PPD) and relative attachment level (RAL) were scored at baseline, 1, 2 and 3 years. Subgingival plaque samples were taken and analysed for their content of 40 bacterial species at each examination interval. All analyses were performed by "intention-to-treat" protocol. Both groups showed significant reduction in BoP, PPD and in mean total counts of the 40 bacterial species between baseline and 3 years, while plaque score and RAL remained almost unchanged. No significant differences between the two prevention programmes were found for any of the clinical outcome variables or in mean counts of the various bacterial species. The study failed to demonstrate superior clinical and microbiological effects of powered toothbrush+triclosan dentifrice compared with manual toothbrush+standard fluoride-dentifrice in periodontitis-susceptible patients on regular maintenance therapy.

The stability of water- and fat-soluble vitamin in dentifrices according to pH level and storage type.

PubMed

Park, Jung-Eun; Kim, Ki-Eun; Choi, Yong-Jun; Park, Yong-Duk; Kwon, Ha-Jeong

2016-02-01

The purpose of this study is to evaluate the vitamin stabilities in dentifrices by analyzing various vitamins according to the level and storage temperature. The stabilities of water- and fat-soluble vitamins were investigated in buffer solution at different pH values (4, 7, 8, 10 and 11) for 14 days and in dentifrices at different pH (7 and 10) for 5 months at two temperature conditions (room and refrigeration temperature) by analyzing the remaining amounts using HPLC methods. In the buffer solution, the stability of vitamins B1 , B6 and C was increased as the pH values increased. Vitamins E and K showed poor stability at pH 4, and vitamin B3 showed poor stability at pH 11. In dentifrices, the storage temperature highly influenced vitamin stability, especially vitamins C and E, but the stabilities of vitamins B1 and C according to pH values did not correspond to the buffer solution tests. Vitamin B group was relatively stable in dentifrices, but vitamin C completely disappeared after 5 months. Vitamin K showed the least initial preservation rates. Vitamins were not detected in commercial dentifrices for adults and detected amounts were less than the advertised contents in dentifrices for children. Copyright © 2015 John Wiley & Sons, Ltd.

Aloe vera herbal dentifrices for plaque and gingivitis control: a systematic review.

PubMed

Dhingra, K

2014-04-01

To evaluate the effectiveness of aloe vera containing herbal dentifrices in improving plaque control and gingival health. A manual and electronic literature (MEDLINE and Cochrane Central Register of Controlled Trials) search was performed up to July 2012, for randomized controlled trials presenting clinical, microbiological, immunological, and patient-centered data for the efficacy of aloe vera herbal dentifrices for controlling plaque and gingival inflammation in patients with gingivitis. From 79 titles and abstracts, eight full-text articles were screened and finally two randomized controlled trials were selected. These randomized controlled trials reported that aloe vera dentifrices were similar in efficacy to control dentifrices in effectively reducing plaque and gingival inflammation in gingivitis patients based on the assessment of clinical, microbiological, and patient-centered treatment outcomes. However, many important details (composition and characteristics of aloe vera and control dentifrices along with appropriate randomization, blinding, and outcomes assessed) were lacking in these trials, and therefore, the quality of reporting and methods was generally flawed with high risk of bias. Even though there are some promising results, the clinical effectiveness of aloe vera herbal dentifrices is not sufficiently defined at present and warrants further investigations based on reporting guidelines of herbal CONSORT statement. © 2013 John Wiley & Sons A/S.

Effect of a variety of Chinese herbs and an herb-containing dentifrice on volatile sulfur compounds associated with halitosis: An in vitro analysis

PubMed Central

Li, Ming-yu; Wang, Jun; Xu, Zhu-ting

2010-01-01

Background: The principal components of halitosis are volatile sulfur compounds (VSCs) such as hydrogen sulfide, methyl mercaptan, and dimethylsulfide or compounds such as butyric acid, propionic acid, putrescine, and cadaverine. Objective: The aim of this study was to evaluate the effect of Chinese herbs on VSCs in vitro. Methods: Saliva samples from volunteers were used as the source for the evaluation of bacterial activity and VSC inhibition. Extracted substances from Chinese herbs were identified by VSC inhibition tests with a Halimeter and microbial sensitivity testing. The effectiveness on halitosis was compared between a dentifrice containing one of the effective Chinese herbs (ie, chrysanthemum flower [Chrysanthemum morifolium flos]), 4 commercially available antihalitosis dentifrices, and a positive control that received no treatment. Results: Ten volunteers provided saliva samples for VSC testing. Of the 40 herbs tested, 14 extracts had percent inhibition rates of VSCs >50%. Ten herbs showed greatest effect against all culturable microorganisms with bacterial inhibition >70%. There was a weak positive correlation between bacteriostasis and the anti-VSC activity of the herbs with a correlation coefficient of 0.2579 (Pearson). The mean (SD) values of the VSC testing were as follows: dentifrice containing chrysanthemum flower, 55.91 (8.16) ppb; Crest Tea Refreshing Dentifrice®, 48.39 (7.48) ppb (P = NS); Cortex Phellodendri Dentifrice®, 139.90 (14.70) ppb (P < 0.01); Colgate Total Plus Whitening®, 120.94 (15.58) ppb (P < 0.01); Zhong Hua Chinese Herbs Dentifrice®, 136.96 (13.06) ppb (P < 0.01); and positive control, 312.38 (28.58) ppb (P < 0.01). Conclusions: Of 40 herbs tested, 14 Chinese herbs were found to be effective for VSC inhibition. A dentifrice containing chrysanthemum flower reduced the formation of VSC in vitro, showing a significantly greater effect than the control group and 3 of 4 dentifrices already on the market. PMID:24683259

Effect of a variety of Chinese herbs and an herb-containing dentifrice on volatile sulfur compounds associated with halitosis: An in vitro analysis.

PubMed

Li, Ming-Yu; Wang, Jun; Xu, Zhu-Ting

2010-04-01

The principal components of halitosis are volatile sulfur compounds (VSCs) such as hydrogen sulfide, methyl mercaptan, and dimethylsulfide or compounds such as butyric acid, propionic acid, putrescine, and cadaverine. The aim of this study was to evaluate the effect of Chinese herbs on VSCs in vitro. Saliva samples from volunteers were used as the source for the evaluation of bacterial activity and VSC inhibition. Extracted substances from Chinese herbs were identified by VSC inhibition tests with a Halimeter and microbial sensitivity testing. The effectiveness on halitosis was compared between a dentifrice containing one of the effective Chinese herbs (ie, chrysanthemum flower [Chrysanthemum morifolium flos]), 4 commercially available antihalitosis dentifrices, and a positive control that received no treatment. Ten volunteers provided saliva samples for VSC testing. Of the 40 herbs tested, 14 extracts had percent inhibition rates of VSCs >50%. Ten herbs showed greatest effect against all culturable microorganisms with bacterial inhibition >70%. There was a weak positive correlation between bacteriostasis and the anti-VSC activity of the herbs with a correlation coefficient of 0.2579 (Pearson). The mean (SD) values of the VSC testing were as follows: dentifrice containing chrysanthemum flower, 55.91 (8.16) ppb; Crest Tea Refreshing Dentifrice®, 48.39 (7.48) ppb (P = NS); Cortex Phellodendri Dentifrice®, 139.90 (14.70) ppb (P < 0.01); Colgate Total Plus Whitening®, 120.94 (15.58) ppb (P < 0.01); Zhong Hua Chinese Herbs Dentifrice®, 136.96 (13.06) ppb (P < 0.01); and positive control, 312.38 (28.58) ppb (P < 0.01). Of 40 herbs tested, 14 Chinese herbs were found to be effective for VSC inhibition. A dentifrice containing chrysanthemum flower reduced the formation of VSC in vitro, showing a significantly greater effect than the control group and 3 of 4 dentifrices already on the market.

Influence of Bristle Stiffness of Manual Toothbrushes on Eroded and Sound Human Dentin – An In Vitro Study

PubMed Central

Arnold, Wolfgang H.; Domin, Julia

2016-01-01

Aim The aim of this study was to determine the influence of manual toothbrushes with different bristle stiffness on the abrasivity on eroded and sound human dentin. Materials and Methods Dentin specimens were made from impacted third molars and attributed to three groups: erosion-abrasion (EA), abrasion (A) and erosion (E). The specimens from EA and E were treated with 1% citric acid (pH 2.3) for 1 min rinsed, and neutralized with artificial saliva for 15 min. This cycle was repeated five times. Thereafter, specimens from EA and A were treated with three toothbrushes types with different bristle stiffness (soft, medium, and hard) in a custom-made toothbrushing machine. The brushing was performed at a load of 3 N with a toothpaste slurry for 630 s. This procedure was repeated five times, in group EA after each erosion cycle. EA and A groups passed through five cycles with a total of 6300 strokes. The abrasivity was analyzed by contact-free profilometry. Kruskal-Wallis and Mann-Whitney U tests were performed for statistical analysis. Results With respect to bristle stiffness there was no statistically significant difference in dentin loss within the EA group. In group A, a statistically significantly higher dentin loss was found for the soft in comparison to the hard bristles. No statistically significant differences were measured between soft/medium and medium/hard toothbrushes. The amount of dentin loss from specimens in the EA group was significantly higher than in the A group. Conclusions Within the limitations of this study, the dentin loss in the Abrasion group was higher with soft bristles than with hard ones. This result might have an influence on the toothbrush recommendations for patients with non-carious cervical lesions. PMID:27070901

Non-contact profilometry of eroded and abraded enamel irradiated with an Er:YAG laser

PubMed Central

Scatolin, Renata Siqueira; Colucci, Vivian; Lepri, Taísa Penazzo; de Alexandria, Adílis Kalina; Maia, Lucianne Cople; Galo, Rodrigo; Borsatto, Maria Cristina; Corona, Silmara Aparecida Milori

2018-01-01

Abstract Literature has reported positive results regarding the use of lasers in the control of erosive lesions; however, evaluating whether they are effective in the control of the progression of erosive/abrasive lesions is important. Objectives This study aimed to evaluate the effect of the Er:YAG laser irradiation in controlling the progression of erosion associated with abrasive lesions in enamel. Material and methods Bovine incisors were sectioned, flattened and polished. Forty-eight enamel slabs were subjected to treatment in an intraoral phase. Twelve volunteers used an intraoral appliance containing one slab that was irradiated with an Er:YAG laser (5.2 J/cm2, 85 mJ, 2 Hz) and another non-irradiated slab on each side of the appliance, during one phase of 5 d, under a split-mouth design. Devices were subjected to erosive challenges (1% citric acid, 5 min, 3 times a day) and abrasive challenges one h after (brushing force of 1.5 N for 15 s) randomly and independently on each side of the device. Measurements of enamel loss were performed via 3D optical profilometry (μm). We analyzed data using the Kruskal-Wallis and Mann-Whitney tests and morphological characteristics via scanning electron microscopy. Results Following erosive and abrasive challenges, the group that was irradiated with the Er:YAG laser presented less loss of structure than the non-irradiated group. The group that underwent erosion and irradiation did not exhibit a significant difference from the non-irradiated group. Conclusion Irradiation with the Er:YAG laser did not control the loss of structure of enamel subjected to erosion but did control abrasion after erosion. PMID:29742259

Non-contact profilometry of eroded and abraded enamel irradiated with an Er:YAG laser.

PubMed

Scatolin, Renata Siqueira; Colucci, Vivian; Lepri, Taísa Penazzo; Alexandria, Adílis Kalina de; Maia, Lucianne Cople; Galo, Rodrigo; Borsatto, Maria Cristina; Corona, Silmara Aparecida Milori

2018-01-01

Literature has reported positive results regarding the use of lasers in the control of erosive lesions; however, evaluating whether they are effective in the control of the progression of erosive/abrasive lesions is important. Objectives This study aimed to evaluate the effect of the Er:YAG laser irradiation in controlling the progression of erosion associated with abrasive lesions in enamel. Material and methods Bovine incisors were sectioned, flattened and polished. Forty-eight enamel slabs were subjected to treatment in an intraoral phase. Twelve volunteers used an intraoral appliance containing one slab that was irradiated with an Er:YAG laser (5.2 J/cm2, 85 mJ, 2 Hz) and another non-irradiated slab on each side of the appliance, during one phase of 5 d, under a split-mouth design. Devices were subjected to erosive challenges (1% citric acid, 5 min, 3 times a day) and abrasive challenges one h after (brushing force of 1.5 N for 15 s) randomly and independently on each side of the device. Measurements of enamel loss were performed via 3D optical profilometry (μm). We analyzed data using the Kruskal-Wallis and Mann-Whitney tests and morphological characteristics via scanning electron microscopy. Results Following erosive and abrasive challenges, the group that was irradiated with the Er:YAG laser presented less loss of structure than the non-irradiated group. The group that underwent erosion and irradiation did not exhibit a significant difference from the non-irradiated group. Conclusion Irradiation with the Er:YAG laser did not control the loss of structure of enamel subjected to erosion but did control abrasion after erosion.

Evaluating the bonding of two adhesive systems to enamel submitted to whitening dentifrices.

PubMed

Briso, André Luiz Fraga; Toseto, Roberta Mariano; de Arruda, Alex Mendes; Tolentino, Patricia Ramos; de Alexandre, Rodrigo Sversut; dos Santos, Paulo Henrique

2010-01-01

The aim of this study was to evaluate by micro-shear bond strength test, the bond strength of composite resin restoration to enamel submitted to whitening dentifrices. Forty bovine teeth were embedded in polystyrene resin and polished. The specimens were randomly divided into eight groups (n=5), according to the dentifrice (carbamide peroxide, hydrogen peroxide and conventional dentifrice) and the adhesive system (Prime & Bond 2.1 and Adper Single Bond 2). Dentifrice was applied for 15 minutes a day, for 21 days. Thirty minutes after the last exposure to dentifrice, the samples were submitted to a bonding procedure with the respective adhesive system. After that, four buttons of resin were bonded in each sample using transparent cylindrical molds. After 24 hours, the teeth were submitted to the micro-shear bond strength test and subsequent analysis of the fracture mode. Data were submitted to analysis of variance and Fisher's PLSD test (alpha = 0.05). The micro-shear bond strength showed no difference between adhesives systems but a significant reduction was found between the control and carbamide groups (p = 0.0145) and the control and hydrogen groups (p = 0.0370). The evaluation of the failures modes showed that adhesive failures were predominant. Cohesive failures were predominant in group IV The use of dentifrice with peroxides can decrease bonding strength in enamel.

The effectiveness of a dentifrice without sodium lauryl sulphate on dental plaque and gingivitis - a randomized controlled clinical trial.

PubMed

Sälzer, S; Rosema, Nam; Hennequin-Hoenderdos, N L; Slot, D E; Timmer, C; Dörfer, C E; Van der Weijden, G A

2017-08-01

The purpose of the study was to evaluate the effect on dental plaque and gingivitis of a dentifrice without sodium lauryl sulphate (SLS) compared to two SLS-containing dentifrices. For this double-blind, parallel study, 90 volunteers having moderate gingival inflammation (≥40%) were randomly divided among three groups: one group using non-SLS dentifrice containing enzymes, colostrum and low concentrations of zinc and two control groups each using different SLS-containing dentifrices. Dental plaque scores (Turesky modification of Quigley & Hein) and gingivitis scores (Bleeding On Marginal Probing) were assessed at baseline, after 2 and 4 weeks. Eighty-nine participants provided evaluable data. A slight decrease in gingivitis scores was observed for all groups over 4 weeks, which was statistically significant for the non-SLS group. Mean values for dental plaque scores did not show major differences over 4 weeks. For both parameters, no significant differences between groups could be observed at any time point. Patient appreciation was in favour of the SLS groups especially regarding the foaming effect. No significant differences could be observed with respect to the effect on plaque and gingivitis between SLS-containing and SLS-free dentifrice containing enzymes, colostrum and low concentration zinc. Patients enjoyed the duration of taste and the 'foaming effect' of SLS-containing dentifrices better. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The effect of CO2 laser irradiation plus fluoride dentifrice on the inhibition of secondary caries on root surfaces adjacent to glass ionomer cement or composite resin restorations

NASA Astrophysics Data System (ADS)

Rodrigues, S. R.; Moraes, M.; Hanashiro, F. S.; Youssef, M. N.; Brugnera Junior, A.; Nobre-dos-Santos, M.; de Souza-Zaroni, W. C.

2016-02-01

Although the cariostatic effects of CO2 laser on the root surface have been shown, there is scarce information regarding its effects on root secondary caries. The objective of this research was to investigate the effect of the association of CO2 laser and a fluoride dentifrice on the inhibition of secondary caries on root surfaces adjacent to composite-resin or glass-ionomer-cement restorations. Dental blocks of human roots were divided into two groups: composite resin (CR) or glass ionomer cement (GIC). Subsequently, the blocks were divided into four subgroups (n  =  10): C, non-fluoride dentifrice; FD, fluoride dentifrice; L, CO2 laser with an energy density of 6.0 J cm-2  +  non-fluoride dentifrice; and L  +  FD, CO2 laser  +  fluoride dentifrice. The blocks were subjected to pH cycling to simulate a high cariogenic challenge. Dental demineralization around the restorations was quantified by microhardness analysis. The results were subjected to analysis of variance (ANOVA) and the Tukey-Kramer test (p  ⩽  0.05). As for mineral loss, it can be observed that all the groups that were treated with a fluoride dentifrice and laser, used alone or not, were statistically similar and superior to the RC-C group. It was concluded that CO2 laser irradiation and a fluoride dentifrice used alone or combined with each other are efficient surface treatments for preventing secondary root caries, regardless of the restorative material used.

Plaque fluoride concentrations in a community without water fluoridation: effects of calcium and use of a fluoride or placebo dentifrice.

PubMed

Whitford, G M; Buzalaf, M A R; Bijella, M F B; Waller, J L

2005-01-01

The results of a recent study by Whitford et al. [Caries Res 2002;36:256-265] with subjects whose drinking water was fluoridated led to two major conclusions: (1) Compared to the use of a placebo dentifrice, plaque fluoride concentrations ([F]) throughout much of the day are not significantly increased by the use of an F dentifrice but (2) they are positively related to plaque [Ca] (p = 0.0001). The present double-blind, double-crossover study with 16 subjects used the same protocol and was done to: (1) determine the effects of the use of an F dentifrice on salivary and plaque [F] in a community without water fluoridation and (2) further examine the relationship between plaque [Ca] and [F]. Following the use of an F dentifrice or placebo for one week, whole saliva and plaque were collected 1.0 and 12 h after the last use of the products. The study was repeated to include rinsing with a 20 mmol/l CaCl(2) solution immediately before the use of the dentifrices. The CaCl(2) rinse had only minor effects on salivary [Ca] and [F] and none on the plaque concentrations. Unlike the results found in the fluoridated community, all salivary and plaque [F] associated with the use of the F dentifrice were significantly higher than those associated with the use of the placebo. The results suggest that the cariostatic effectiveness of an F dentifrice should be greater in areas without water fluoridation. As noted previously, plaque [F] were positively related to plaque [Ca] (p = 0.0001). Copyright (c) 2005 S. Karger AG, Basel.

Abfraction, abrasion, biocorrosion, and the enigma of noncarious cervical lesions: a 20-year perspective.

PubMed

Grippo, John O; Simring, Marvin; Coleman, Thomas A

2012-02-01

Hitherto, noncarious cervical lesions (NCCLs) of teeth have been generally ascribed to either toothbrush-dentifrice abrasion or acid "erosion." The last two decades have provided a plethora of new studies concerning such lesions. The most significant studies are reviewed and integrated into a practical approach to the understanding and designation of these lesions. A paradigm shift is suggested regarding use of the term "biocorrosion" to supplant "erosion" as it continues to be misused in the United States and many other countries of the world. Biocorrosion embraces the chemical, biochemical, and electrochemical degradation of tooth substance caused by endogenous and exogenous acids, proteolytic agents, as well as the piezoelectric effects only on dentin. Abfraction, representing the microstructural loss of tooth substance in areas of stress concentration, should not be used to designate all NCCLs because these lesions are commonly multifactorial in origin. Appropriate designation of a particular NCCL depends upon the interplay of the specific combination of three major mechanisms: stress, friction, and biocorrosion, unique to that individual case. Modifying factors, such as saliva, tongue action, and tooth form, composition, microstructure, mobility, and positional prominence are elucidated. By performing a comprehensive medical and dental history, using precise terms and concepts, and utilizing the Revised Schema of Pathodynamic Mechanisms, the dentist may successfully identify and treat the etiology of root surface lesions. Preventive measures may be instituted if the causative factors are detected and their modifying factors are considered. © 2011 Wiley Periodicals, Inc.

Sustained antibacterial actions of a new stabilized stannous fluoride dentifrice containing sodium hexametaphosphate.

PubMed

Ramji, Nivedita; Baig, Arif; He, Tao; Lawless, Michelle A; Saletta, Lisa; Suszcynsky-Meister, Elaine; Coggan, John

2005-09-01

Stannous fluoride has been used as a chemotherapeutic agent for years to improve oral health. The benefits of stannous fluoride in controlling caries, plaque, and gingivitis are directly associated with its antimicrobial actions. Recently, a novel dentifrice was developed that combines stannous fluoride with an anticalculus agent, sodium hexa. metaphosphate. A series of independent evaluations were conducted to assess the long-lasting antimicrobial activity of stannous fluoride in the new stannous fluoride/sodium hexametaphosphate dentifrice: an in vitro Live/Dead assay; an in vivo Plaque Glycolysis and Regrowth Model study; a rapid in vitro salivary bacteria metabolic activity study; and a 12-hour in vivo tin-retention study. In the Live/Dead study, the new stannous fluoride/sodium hexametaphosphate dentifrice killed approximately 90% to 99% of the salivary microbes 16 hours after a single exposure. Similarly, the stannous fluoride dentifrice produced statistically significant reductions in plaque acid production and plaque regrowth activity compared to plaque treated with a standard fluoride dentifrice at all time intervals measured after product exposure (15 and 45 minutes). Results from the final two studies collectively demonstrated the presence of total soluble tin, which serves as a marker for the active stannous fluoride, at levels above the minimum concentration for inhibition of salivary bacteria metabolic activity 12 hours posttreatment. These findings confirm the long-lasting antibacterial action of the new stannous fluoride dentifrice, which serves as a basis for its therapeutic benefits.

Rock Bites into 'Bounce'

NASA Technical Reports Server (NTRS)

2004-01-01

This panoramic camera image from the Mars Exploration Rover Opportunity features the 6.44 millimeter (0.25 inch) deep hole ground into the rock dubbed 'Bounce' by the rover's rock abrasion tool. The tool took 2 hours and 15 minutes to grind the hole on sol 66 of the rover's journey. A combination of limited solar power and the rock's jagged texture led the rock abrasion tool team to set very aggressive grinding parameters to ensure that the end result was a full circle, suitable for a thorough read from the rover's spectrometers.

Bounce's markedly different appearance (when compared to the rocks that were previously examined in the Eagle Crater outcrop) made it a natural target for rover research. In order to achieve an ideal position from which to grind into the rock, Opportunity moved in very close with its right wheel next to Bounce. In this image, the panoramic camera on the rover's mast is looking down, catching the tip of the solar panel which partially blocks the full circle ground by the rock abrasion tool.

The outer ring consists of the cuttings from the rock, pushed out by the brushes on the grinding instrument. The dark impression at the top of the outer circle was caused by the instrument's contact mechanism which serves to stabilize it while grinding.

The influence of salivary variables on fluoride retention in dental plaque exposed to a mineral-enriching solution.

PubMed

Kato, K; Nakagaki, H; Arai, K; Pearce, E I F

2002-01-01

This study was carried out to examine interindividual differences in salivary variables related to plaque accumulation and to estimate their influence on the fluoride retention in plaque in vivo by a mineral-enriching solution. Two saliva samples were taken from 10 subjects, once after brushing and once after 24 h without brushing. Calcium, phosphate and monofluorophosphatase (MFPase) activity in the saliva samples were determined. The salivary flow rate and the debris index were also recorded. After plaque had formed over 3 days within in situ plaque-generating devices, subjects were instructed to rinse with a mineral-enriching mouthrinse three times a day on 4 consecutive days. Plaque exposed to distilled water plus flavoring agents served as a control. Fluoride-free dentifrice was used during the experimental period. Twenty-four hours after the last rinsing, the samples were removed from the mouth, and fluoride and mineral distributions in plaque analyzed using a method previously reported by the authors. Salivary flow, MFPase activity and calcium concentration in saliva were significantly higher after 24 h of plaque accumulation. Rinsing with the mineral-enriching solution produced retention of fluoride and phosphate in the outer and middle layers of plaque. Salivary calcium concentration had a direct effect on fluoride uptake in plaque, but no obvious relationship was found between other salivary variables and the plaque fluoride retention. The salivary calcium effect may be due to enhanced bacterial cell wall binding of fluoride via calcium bridging. Copyright 2002 S. Karger AG, Basel

Remineralization Potential of Three Different Dentifrices using Raman Spectroscopy and Confocal Laser Scanning Microscope.

PubMed

Job, Tisson V; Narayana, Girish T; Venkappa, Kishan K; Nathan, K Binu; Ahsan, Shameem; Harikaran, Jayakkodi

2018-04-01

Aim: The aim of this study was to compare the remineralization potential of three different dentifrices using Raman spectroscopy and confocal laser scanning microscopy (CLSM). Materials and methods: Totally, 30 extracted intact impacted third molar teeth were selected and the crown of each tooth in a group was separated from the root and longitudinally sectioned into four parts with each section under a subgroup, of which one section was an untreated section, the second and the third sections were demineralized in a demineralizing solution, and the third section was remineralized after demineralization. The teeth in the three groups were demineralized for 4 days and then treated with 0.21% sodium fluoride dentifrice with trical-cium phosphate, casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), and NovaMin for 14 days, following which the teeth surfaces were studied using Raman spec-troscopy and CLSM to assess the remineralization potential of the three dentifrices. The data were recorded and analyzed statistically. Results: Raman spectroscopic analysis revealed better remin-eralization with CPP-ACP, which was statistically significant from the groups treated with the NovaMin dentifrice and the fluoride-containing dentifrice.Confocal laser scanning microscopic examination also revealed significant differences between the three groups with the NovaMin-containing dentifrice demonstrating a greater remineralization of the surface when compared with the CPP-ACP dentifrice. The teeth samples treated with fluoride-containing dentifrice demonstrated the least reminer-alization among the three groups. Conclusion: It can be concluded that the demineralized samples of teeth treated with CPP-ACP showed the highest concentration of phosphate ions when analyzed using Raman spectroscopy, and the microscopic examination using confocal laser revealed a better surface remineralization of the demin-eralized samples when treated with the NovaMin technology. Clinical significance: There is a great need to find ways to enhance the remineralization process and transfer such knowledge into clinical therapy to alter caries balance for the better, especially in individuals with a high cariogenic bacterial challenge. Keywords: Casein phosphopeptide-amorphous calcium phosphate, Fluoride, NovaMin, Remineralization, Tricalcium phosphate.

The measurement of enamel and dentine abrasion by tooth whitening products using an in situ model.

PubMed

Joiner, A; Collins, L Z; Cox, T F; Pickles, M J; Weader, E; Liscombe, C; Holt, J S

2005-01-01

To determine the enamel and dentine wear of two whitening toothpastes using an in situ model with ex vivo brushing. Human enamel/dentine (approximately 50:50) blocks (approximately 4 x 4mm) were placed in the upper buccal aspects of full or partial dentures of a group of 25 subjects. Subjects brushed the specimens ex vivo with either a calcium carbonate/perlite or silica containing whitening toothpaste under exaggerated conditions as compared to normal for 30 s, twice per day. Specimens were removed after 4, 8 and 12 weeks and the wear to the enamel and dentine was determined. Enamel wear was determined by change in Knoop indent length and dentine wear was determined from the enamel-dentine step height, measured using optical profilometry. The mean wear after 12 weeks was for enamel 0.27 and 0.19 microns, and for dentine 34.3 and 61.1 microns, for the calcium carbonate/perlite and silica toothpastes respectively. There were no significant differences between products after 12 weeks. The rate of wear was found to decrease throughout the duration of the study. There were no significant differences between the two whitening toothpastes in terms of enamel and dentine wear after 12 weeks brushing.

In situ clinical effects of new dentifrices containing 1.5% arginine and fluoride on enamel de- and remineralization and plaque metabolism.

PubMed

Cantore, R; Petrou, I; Lavender, S; Santarpia, P; Liu, Z; Gittins, E; Vandeven, M; Cummins, D; Sullivan, R; Utgikar, N

2013-01-01

The primary objective of the three studies reported in this paper was to evaluate the effects of new dentifrices containing 1.5% arginine, an insoluble calcium compound, and fluoride for their ability to promote remineralization of demineralized enamel, and to prevent mineral loss from sound enamel specimens. A secondary objective was to determine the effects on plaque metabolism with respect to the conversion of arginine to ammonia and sucrose to lactic acid. In Study 1, an intraoral remineralization/demineralization clinical model was used to assess the ability to promote remineralization of enamel of two dentifrices containing 1.5% arginine and 1450 ppm fluoride, as sodium monofluorophosphate (MFP), relative to a positive control with dicalcium phosphate dihydrate (Dical) and 1450 ppm fluoride, and a negative control with Dical and 250 ppm fluoride. One of the arginine-containing dentifrices contained Dical, and the other contained calcium carbonate as the source of insoluble calcium. Microradiography and image analysis were used to measure mineral changes. The study used a double-blind crossover design with a two-week treatment period. Each treatment period was preceded by a one-week washout period. Each product was used twice a day for two weeks. In the two other studies, the ability of dentifrices containing 1.5% arginine and fluoride to prevent demineralization of sound enamel blocks was assessed using an intraoral demineralization/remineralization clinical model and a double-blind crossover design with a five-day treatment period. A one-week minimum washout period preceded each treatment phase. Microhardness was used to assess mineral changes. Cariogenic challenges were administered by dipping each intraoral retainer into a 10% sucrose solution four times per day. Each product was used twice per day during the treatment period. Plaque was harvested from the specimens to measure the ability of the plaque to convert arginine to ammonia (Studies 2 and 3) and sucrose to lactic acid (Study 3) at the end of each treatment period. In Study 2, a dentifrice containing 1.5% arginine, Dical, and 1450 ppm fluoride as MFP was compared to a matched positive control containing 1450 ppm fluoride and to a matched negative control containing 250 ppm fluoride. In Study 3, a dentifrice containing 1.5% arginine, calcium carbonate, and 1000 ppm fluoride as MFP was compared to a matched positive control containing 1000 ppm fluoride and to a matched negative control containing 0 ppm fluoride. In Study 1, the percent mineral changes were +18.64, +16.77, +4.08, and -24.95 for the 1.5% arginine/Dical/1450 ppm fluoride, the 1.5% arginine/calcium carbonate/1450 ppm fluoride, the positive control, and negative control dentifrices, respectively. Study validation was successfully achieved by showing that the positive control was statistically significantly better that the negative control in promoting remineralization (p = 0.0001). The two arginine-containing test products were statistically significantly better than the positive control (p < 0.05). No significant difference was observed in efficacy between the two arginine-containing products, indicating that efficacy in promoting remineralization was independent of the choice of Dical or calcium carbonate as the source of insoluble calcium. In Study 2, the percent demineralization values were -8.50, +1.67, and +12.64 for the 1.5% arginine/Dical/1450 ppm fluoride, the positive control, and negative control dentifrices, respectively. Study validation was successfully achieved by showing that the positive control was statistically significantly better at preventing demineralization than the negative control (p < 0.0001). The arginine-containing dentifrice was shown to be statistically significantly better at preventing enamel demineralization than the positive control (p < 0.0001). Plaque metabolism measures for plaque exposed to the three treatments gave the following values for ammonia production after an arginine-sucrose challenge, expressed in nanomoles per milligram plaque: 162.7; 105.4; and 115.9 for the 1.5% arginine/Dical/1450 ppm fluoride, positive control, and negative control dentifrices, respectively. No statistically significant differences were observed between the three treatments, but the arginine-based dentifrice showed directionally higher ammonia production than both the positive and negative controls In Study 3, the percent demineralization values were +1.16, +4.96, and +15.34, for the 1.5% arginine/calcium carbonate/1 000 ppm fluoride, the positive control, and negative control dentifrices, respectively. Study validation was successfully achieved by showing that the positive control was statistically significantly better at preventing demineralization than the negative control (p < 0.0001). The arginine-containing dentifrice was shown to be statistically significantly better at preventing enamel demineralization than the positive control (p < 0.05). Plaque metabolism measures for plaque exposed to the three treatments gave the following values for ammonia production after an arginine-sucrose challenge, expressed in nanomoles per milligram plaque: 99.6; 56.2; and 42.2 for the 1.5% arginine/calcium carbonate/1000 ppm fluoride, the positive control, and negative control dentifrices, respectively. Plaque treated with the arginine- containing dentifrice produced significantly more ammonia than the positive and negative control dentifrices (p < 0.05). No significant difference in ammonia production was observed between the two controls. Lactic acid production after a sucrose challenge gave the following values, expressed as nanomoles per milligram plaque: 4.06; 5.12; and 4.64 for the 1.5% arginine/calcium carbonate/1000 ppm fluoride, the positive control, and negative control dentifrices, respectively. No significant difference was observed between the three treatments, but the arginine-based treatment showed directionally lower lactic acid production. The results of these three studies show that dentifrices containing 1.5% arginine, an insoluble calcium compound, and fluoride have a significantly improved ability to promote remineralization and prevent demineralization of enamel relative to dentifrices containing the same level of fluoride alone. Two different sources of insoluble calcium were evaluated, Dical and calcium carbonate. Dentifrices with Dical and with calcium carbonate, each in combination with 1.5% arginine and fluoride, provided superior efficacy as compared to matched dentifrices with fluoride alone, and the two products demonstrated comparable efficacy in promoting remineralization. The results of these studies demonstrate that the addition of 1.5% arginine to Dical-and calcium carbonate-based fluoride dentifrices provides superior efficacy in preventing demineralization and promoting remineralization, and, further, indicate that he arginine-containing dentifrices enhance the ability of plaque to metabolize arginine to ammonia.

Dentifrice Containing Extract of Rosmarinus officinalis Linn.: An Antimicrobial Evaluation.

PubMed

Valones, Marcela Agne Alves; Higino, Jane Sheila; Souza, Paulo Roberto Eleutério; Crovella, Sérgio; Caldas, Arnaldo de França; Carvalho, Alessandra de Albuquerque Tavares

2016-01-01

This study aimed to evaluate the antimicrobial activity of a dentifrice containing an alcoholic extract of rosemary on oral bacteria, compared to a commercially available herbal dentifrice. Standard strains of Streptococcus mutans (ATCC 25175), Streptococcus oralis (ATCC 9811) and Lactobacillus rhamnosus (ATCC 7469) were used, as well as different toothpastes based on rosemary (TR), on propolis (TH), triclosan (positive control) (TPC) and non-fluoridated dentifrice (negative control) (TNC). Bacteria were seeded in Petri dishes and paper discs soaked with dilutions of dentifrice placed on the plates. The inhibition halos were analyzed. It was observed that TR did not show statistical difference in relation to the TH to inhibit S. mutans and S. oralis, while TH was more active against L. rhamnosus. The toothpaste containing rosemary extract had the ability to inhibit the growth of S. mutans, S. oralis and L. rhamnosus, revealing an antimicrobial activity similar to commercially available toothpastes for inhibition of S. mutans and S. oralis.

Clinical efficacy of a herbal dentifrice on dentinal hypersensitivity: a randomized controlled clinical trial.

PubMed

Kumari, M; Naik, S B; Rao, N S; Martande, S S; Pradeep, A R

2013-12-01

Dentinal hypersensitivity is a common problem and there is a growing interest in herbal based formulations for the treatment of oral diseases. This study was conducted to assess the efficacy of a commercially available novel herbal dentifrice in reduction of dentinal hypersensitivity. A total of 73 subjects (38 males and 35 females; aged 25-60 years) were randomly divided into two groups: Group 1 - a placebo dentifrice (The Himalaya Drug Company Research and Development, Makali, Bangalore) and Group 2 - (test group), a commercially available herbal dentifrice (Hi Ora K, The Himalaya Drug Company Research and Development, Makali, Bangalore). Sensitivity scores for controlled air stimulus and cold water were recorded at baseline, 6 weeks and 12 weeks. The test group was found to be significantly better compared to the placebo group at the end of 6 and 12 weeks in reduction of dentinal hypersensitivity. The novel herbal dentifrice can be recommended for treatment of dentinal hypersensitivity. © 2013 Australian Dental Association.

Clinical study to monitor dentinal hypersensitivity with episodic use of a desensitising dentifrice

PubMed Central

Mason, Stephen; Kingston, Rose; Shneyer, Lucy; Harding, Máiréad

2017-01-01

Objectives/Aims: To evaluate continuous and episodic twice-daily usage regimens of a desensitising dentifrice containing 5% calcium sodium phosphosilicate (CSPS). Materials and Methods: In this exploratory, single-centre, randomised, examiner-blind study, subjects with dentinal hypersensitivity were randomised to continuous (24 weeks) use of a 5% CSPS-containing dentifrice or episodic use of the dentifrice comprising two 8-week treatment periods separated by 8 weeks′ use of a standard fluoride dentifrice. Sensitivity was assessed by tactile threshold (Yeaple probe) and evaporative (air) sensitivity (Schiff sensitivity score). Other measures included labelled magnitude scales to assess subjects′ responses to the evaporative stimulus, the Dentine Hypersensitivity Experience Questionnaire and a tooth sensitivity question. Results: Seventy-six subjects were randomised to continuous (n=38) or episodic (n=38) use. Small but statistically significant improvements from baseline in Schiff sensitivity scores were observed at weeks 8, 16 and 24 with both regimens (all P<0.05). Increases from baseline in tactile threshold were not statistically significant. No significant between-regimen difference was observed for any endpoint. No treatment-related adverse events were reported. Discussion: Dentifrice containing 5% CSPS improved dentinal hypersensitivity with both episodic and continuous twice-daily usage regimens over 24 weeks and was well tolerated. Conclusion: No performance differences were observed between the two usage regimens. PMID:29789771

Erosion and abrasion-inhibiting in situ effect of the Euclea natalensis plant of African regions.

PubMed

Sales-Peres, Silvia Helena de Carvalho; Xavier, Cheila Nilza Hamina; Mapengo, Marta Artemisa Abel; Forim, Moacir Rossi; Silva, Maria de Fatima; Sales-Peres, Arsenio

2016-06-14

This study evaluated the effect of Euclea natalensis gel on the reduction of erosive wear with or without abrasion, in enamel and dentin. During two five-day experimental crossover phases, volunteers (n = 10) wore palatal devices containing human enamel and dentin blocks (E = 8 and D = 8). The gel was applied in a thin layer in the experimental group, and was not applied in the control group. In the intraoral phase, volunteers used the palatal appliance for 12 h before the gel treatment, and were instructed to start the erosive challenges 6 h after the gel application. Erosion was performed with Coca-Cola® (for 5 min) 4 times/day. The appliance was then put back into the mouth and was brushed after 30 minutes. After intraoral exposure, the appliances were removed and the specimens were analyzed using profilometry (mean ± SD, μm). The Euclea natalensis gel caused less wear in enamel in the experimental group (EROS = 12.86 ± 1.75 µm; EROS + ABRAS = 12.13 ± 2.12 µm) than in the control group (EROS = 14.12 ± 7.66 µm; EROS + ABRAS = 16.29 ± 10.72 µm); however, the groups did not differ from each other significantly. A statistically significant value was found for erosion and eros + abrasion in dentin (p = 0.001). Euclea natalensis may play a role in the prevention of dentin loss under mild erosive and abrasive conditions. A clinical trial is required to confirm these promising results in a clinical situation.

A Comparison of the Effect of Two Power Toothbrushes on the Gingival Health and Plaque Status of Subjects with Moderate Gingivitis.

PubMed

Starke, Michelle; Delaurenti, Marcia; Ward, Marilyn; Souza, Sonia; Milleman, Kimberly R; Milleman, Jeffery L

2017-03-01

To compare the effect of the Philips Sonicare DiamondClean plus Premium plaque control brush head with the Oral-B 7000 plus CrossAction brush head on gingivitis and supragingival plaque reduction following a 42-day period of home use. This was a randomized, parallel, examiner-blind, prospective clinical trial conducted on generally healthy subjects. Eligible subjects met the following eligibility criteria: age 18-65, non-smoker, routine manual toothbrush user, ≥ 50 sites of gingival bleeding per the Gingival Bleeding Index (GBI), and ≥ 1.8 plaque score per the Modified Plaque Index (MPI), assessed three to six hours following the last oral hygiene procedure. Eligible subjects were enrolled in the study and randomly assigned to use either a Philips Sonicare DiamondClean with Premium plaque control brush head power toothbrush (SPC) or an Oral-B® 7000 with CrossAction™ brush head power toothbrush (OCA), for twice daily home use over a period of 42 days. All subjects were dispensed a standard fluoride-containing dentifrice and both toothbrushes were to be used in their respective Deep Clean modes. Safety and efficacy evaluations were performed at 14 and 42 days following Baseline. Two-hundred eighty-four subjects completed this trial (142 subjects per treatment group). Least squares mean (95% CI) estimates for reduction and percent reduction of gingivitis per Modified Gingival Index (MGI) following 42 days of product use for the SPC group were 1.17 (1.10, 1.24) and 45.68% (42.95%, 48.40%); for the OCA group they were 0.69 (0.62, 0.76) and 26.83% (24.10%, 29.56%). The mean difference (95% CI) between the two treatment groups was 0.48 (0.38, 0.58) and 18.85% (14.99%, 22.70%) for reduction and percent reduction, respectively. The lower limit of the 95% CI for the difference in Overall score between the two treatment groups was greater than the predefined non-inferiority margin (i.e., -0.10 or -5%); therefore SPC was declared non-inferior to OCA. In addition, since the 95% CI for the difference did not include zero, SPC was declared superior to OCA in the reduction of gingivitis per MGI at Day 42 (p-value < 0.0001). Similarly, for MGI at Day 14 and for GBI and MPI at Day 14 and Day 42, significantly larger reductions were observed for SPC compared to OCA (p-value < 0.0001). Philips Sonicare DiamondClean with Premium plaque control brush head (SPC) was statistically superior to the Oral-B 7000 with CrossAction brush head (OCA) in reducing gingival inflammation, gingival bleeding, and supragingival plaque following 14 and 42 days of home use. Both products were safe for use.

The effect of magnesium hydroxide-containing dentifrice using an extrinsic and intrinsic erosion cycling model.

PubMed

Passos, Vanara Florêncio; Rodrigues, Lidiany Karla Azevedo; Santiago, Sérgio Lima

2018-02-01

To evaluate, in vitro, the effect of Mg(OH) 2 dentifrice, and the influence of the number of experimental days, on the extrinsic (citric acid -CA) and intrinsic (hydrochloric acid -HCl) enamel erosion models. Human enamel slabs were selected according to surface hardness and randomly assigned to 3 groups (n=9) as follows: non-fluoridated (negative control), NaF (1450ppm F- positive control) and Mg(OH) 2 (2%) dentifrices. The slabs were daily submitted to a 2-h period of pellicle formation and, over a period of 5days, submitted to cycles (3×/day) of erosive challenge (CA 0.05M, pH=3.75 or HCl 0.01M, pH=2 for 30s), treatment (1min -1:3w/w of dentifrice/distilled water) and remineralization (artificial saliva/120min). Enamel changes were determined by surface hardness loss (SHL) for each day and mechanical profilometry analysis. Data were analyzed by two-way ANOVA followed by Tukey's test to % SHL and one-way ANOVA to profilometry (p<0.05). The number of experimental days influenced the erosion process for the two types of erosion models (p<0.001). Mg(OH) 2 -containing dentifrices were effective in reducing enamel extrinsic acid erosion as determined by % SHL (p<0.001) when compared to the control group, being better than positive control (p<0.001); however, the dentifrices were not effective for the intrinsic model (p=0.295). With regards to surface wear, no statistically significant differences were found among the groups for CA (p=0.225) and HCl (p=0.526). The findings suggest that Mg(OH) 2 dentifrices might protect enamel against slight erosion, but protection was not effective for stronger acid erosion. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Self-perception of fluorosis due to fluoride exposure to drinking water and dentifrice].

PubMed

de Menezes, Léa Maria Bezerra; de Sousa, Maria da Luz Rosário; Rodrigues, Lidiany Karla Azevedo; Cury, Jaime Aparecido

2002-12-01

The impact of dental fluorosis in children exposed to fluoride in drinking water and dentifrice was evaluated. Dental fluorosis was found in 72% of the children, but the children's well-being was not affected. It was concluded that although dental fluorosis due to the intake of optimally fluoridated drinking water and dentifrice did not affect the dental aesthetics of this studied population sample, there is a need of further studies on the subject.

Loss on drying, calcium concentration and pH of fluoride dentifrices

PubMed Central

Brito, Arella Cristina Muniz; Dantas, Lívia Rocha; De Brito, André Luiz Fiquene; Muniz, Ana Cristina Silva; Ramos, Ianny Alves; Cardoso, Andreia Medeiros Rodrigues; Xavier, Alidianne Fábia Cabral; Cavalcanti, Alessandro Leite

2015-01-01

Introduction: Fluoride dentifrices containing calcium carbonate have advantages such as control of dental plaque and progression of dental caries, also contributing to oral hygiene, represent most dentifrices marketed in Brazil. Aim: To evaluate the physicochemical properties of seven fluoride dentifrices containing calcium carbonate in relation to hydrogen potential (pH), loss on drying and calcium concentration. Materials and Methods: Data collection was performed using the potentiometric method for pH ranges, gravimetric analysis for loss on drying and atomic absorption spectrometry for the concentration of calcium ions. All tests were performed in triplicate and the analysis was performed entirely at random according to one-way analysis of variance at 5% significance level. Results: The pH values were alkaline and ranged from 8.67 (Oral-B 123®) to 10.03 (Colgate Máxima Proteção Anticáries®). The results of loss on drying ranged from 33.81% (Oral-B 123®) to 61.13% (Close Up®), with significant differences between brands tested. In relation to the calcium content, the highest and lowest concentrations were found in dentifrices Even® (155.55 g/kg) and Colgate Ultra Branco® (129 g/kg), respectively, with significant difference (P < 0.05). Conclusion: Fluoride dentifrices analyzed showed alkaline pH and high levels of loss on drying and calcium concentration. However, these physicochemical characteristics differed according to the different brands tested. PMID:25821380

Comparison of anti-plaque efficacy between a low and high cost dentifrice: A short term randomized double-blind trial

PubMed Central

Ganavadiya, Rahul; Shekar, B. R. Chandra; Goel, Pankaj; Hongal, Sudheer G.; Jain, Manish; Gupta, Ruchika

2014-01-01

Objective: The aim of this study was to compare the anti-plaque efficacy of a low and high cost commercially available tooth paste among 13-20 years old adolescents in a Residential Home, Bhopal, India. Materials and Methods: The study was randomized double-blind parallel clinical trial conducted in a Residential Home, Bhopal, India. A total of 65 patients with established dental plaque and gingivitis were randomly assigned to either low cost or high cost dentifrice group for 4 weeks. The plaque and gingival scores at baseline and post-intervention were assessed and compared. Statistical analysis was performed using paired t-test and the independent sample t-test. The statistical significance was fixed at 0.05. Results: Results indicated a significant reduction in plaque and gingival scores in both groups post-intervention compared with the baseline. Difference between the groups was not significant. No adverse events were reported and both the dentifrices were well-tolerated. Conclusion: Low cost dentifrice is equally effective to the high cost dentifrice in reducing plaque and gingival inflammation. PMID:25202220

The durability of phosphoric acid promoted bioglass-dentin interaction layer.

PubMed

Bakry, A S; Takahashi, H; Otsuki, M; Tagami, J

2013-04-01

Phosphoric acid-Bioglass 45S5 paste can create an interaction layer formed of calcium-phosphate crystals on the dentin surface. In this study, the efficiency of decreasing the dentin permeability exerted by the interaction layer formed between bioglass and dentin was compared to a resin-containing oxalate desensitizing agent (MS Coat One) and a resin-free oxalate desensitizing agent (Super Seal). Dentin permeability was measured before/after a brushing abrasion challenge, followed by examining the top and the fractured dentin surfaces with a field emission scanning electron microscope. Moreover, the chemical nature of the compounds formed on top of the dentin surface was examined using the field emission scanning electron microscope (FE-SEM) equipped with an energy-dispersive X-ray spectroscope (EDS), and the crystalline structures of the dentinal surfaces were examined by X-ray diffraction (XRD). The results showed that application of 45S5 bioglass paste to dentin was able to occlude patent dentinal tubule orifices with a layer of calcium-phosphate crystals, while the oxalate containing agents were able to form small crystals which were found in dentinal tubule orifices and scattered along the superficial parts of the dentinal tubule lumen. The brushing-abrasion challenge significantly increased the permeability of dentin treated by Super Seal and MS Coat One, while these challenges had no significant effect on the dentin permeability of specimens treated with 45S5 bioglass paste. The new technique provided better durability than two products available on the market. Moreover, our previous research showed the biocompatibility of using this technique on dental pulp cells, suggesting that this technique can aid in treating dentin hypersensitivity cases. Copyright © 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Baking soda dentifrice and periodontal health: A review of the literature.

PubMed

Sabharwal, Amarpreet; Scannapieco, Frank A

2017-11-01

Mechanical disruption of dental biofilm is critical to maintain periodontal health. Baking soda-containing dentifrices have shown to be potential aids for improving gingival health and maintaining dental biofilm control. Evidence from classic and contemporary literature is reviewed and summarized in this review. In vitro and in vivo (animal and human, respectively) studies and clinical trials have been analyzed. Some clinical studies demonstrated the benefits of baking soda dentifrices in plaque and gingivitis reduction. Clinical trials with longer follow-up would be useful to confirm the impact of baking soda on gingival health. Regular dental biofilm control and adjunctive use of baking soda dentifrices in an otherwise healthy and compliant patient may provide success in maintenance of gingival health. Copyright © 2017 American Dental Association. Published by Elsevier Inc. All rights reserved.

Effect of mechanical cleaning with granular material on the permeability of submerged membranes in the MBR process.

PubMed

Siembida, B; Cornel, P; Krause, S; Zimmermann, B

2010-07-01

The research on fouling reduction and permeability loss in membrane bioreactors (MBRs) was carried out at two MBR pilot plants with synthetic and real wastewater. On the one hand, the effect of mechanical cleaning with an abrasive granular material on the performance of a submerged MBR process was tested. Additionally, scanning electron microscopy (SEM) measurements and integrity tests were conducted to check whether the membrane material was damaged by the granulate.The results indicate that the fouling layer formation was significantly reduced by abrasion using the granular material. This technique allowed a long-term operation of more than 600 days at a flux up to 40 L/(m2 h) without chemical cleaning of the membranes. Moreover, it was demonstrated that the membrane bioreactor (MBR) with granulate could be operated with more than 20% higher flux compared to a conventional MBR operation. SEM images and integrity tests showed that in consequence of abrasive cleaning, the granular material left brush marks on the membrane surface, however, the membrane function was not affected.In a parallel experimental set up, the impact of the operationally defined "truly soluble fraction" <0.04 microm from wastewater and activated sludge on the ultrafiltration membrane fouling characteristics was investigated. It was shown that the permeability loss was caused predominantly by the colloidal fraction >0.04 microm rather than by the dissolved fraction of wastewater and activated sludge.

pH-cycling models for in vitro evaluation of the efficacy of fluoridated dentifrices for caries control: strengths and limitations

PubMed Central

BUZALAF, Marília Afonso Rabelo; HANNAS, Angélica Reis; MAGALHÃES, Ana Carolina; RIOS, Daniela; HONÓRIO, Heitor Marques; DELBEM, Alberto Carlos Botazzo

2010-01-01

Despite a plethora of in situ studies and clinical trials evaluating the efficacy of fluoridated dentifrices on caries control, in vitro pH cycling models are still broadly used because they mimic the dynamics of mineral loss and gain involved in caries formation. This paper critically reviews the current literature on existing pH-cycling models for the in vitro evaluation of the efficacy of fluoridated dentifrices for caries control, focusing on their strengths and limitations. A search was undertaken in the MEDLINE electronic journal database using the keywords "pH-cycling", "demineralization", "remineralization", "in vitro", "fluoride", "dentifrice". The primary outcome was the decrease of demineralization or the increase of remineralization as measured by different methods (e.g.: transverse microradiography) or tooth fluoride uptake. Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. One hundred and sixteen studies were included, of which 42 addressed specifically the comparison of dentifrices using different pH-cycling models. The other studies included meta-analysis or reviews, data about the effect of different fluoride sources on de-remineralization, different methods for analysis de-remineralization and chemical variables and characteristics of dental hard tissues that might have influence on de-remineralization processes. Generally, the studies presented ability to detect known results established by clinical trials, to demonstrate dose-related responses in the fluoride content of the dentifrices, and to provide repeatability and reproducibility between tests. In order to accomplish these features satisfactorily, it is mandatory to take into account the type of substrate and baseline artificial lesion, as well as the adequate response variables and statistical approaches to be used. This critical review of literature showed that the currently available pH-cycling models are appropriate to detect dose-response and pH-response of fluoride dentifrices, and to evaluate the impact of new active principles on the effect of fluoridated dentifrices, as well as their association with other anti-caries treatments. PMID:20835565

Titanium surface topography after brushing with fluoride and fluoride-free toothpaste simulating 10 years of use.

PubMed

Fais, Laiza M G; Fernandes-Filho, Romeu B; Pereira-da-Silva, Marcelo A; Vaz, Luis G; Adabo, Gelson L

2012-04-01

To conduct a controlled study contrasting titanium surface topography after procedures that simulated 10 years of brushing using toothpastes with or without fluoride. Commercially pure titanium (cp Ti) and Ti-6Al-4V disks (6 mm Ø×4 mm) were mirror-polished and treated according to 6 groups (n=6) as a function of immersion (I) or brushing (B) using deionised water (W), fluoride-free toothpaste (T) and fluoride toothpaste (FT). Surface topography was evaluated at baseline (pretreatment) and post-treatment, using atomic force microscope in order to obtain three-dimensional images and mean roughness. Specimens submitted to immersion were submerged in the vehicles without brushing. For brushed specimens, procedures were conducted using a linear brushing machine with a soft-bristled toothbrush. Immersion and brushing were performed for 244 h. IFT and BFT samples were analysed under scanning electron microscope with Energy-Dispersive X-ray Spectroscopy (EDS). Pre and post-treatment values were compared using the paired Student T-test (α=.05). Intergroup comparisons were conducted using one-way ANOVA with Tukey post-test (α=.05). cp Ti mean roughness (in nanometers) comparing pre and post-treatment were: IW, 2.29±0.55/2.33±0.17; IT, 2.24±0.46/2.02±0.38; IFT, 2.22±0.53/1.95±0.36; BW, 2.22±0.42/3.76±0.45; BT, 2.27±0.55/16.05±3.25; BFT, 2.27±0.51/22.39±5.07. Mean roughness (in nanometers) measured in Ti-6Al-4V disks (pre/post-treatment) were: IW, 1.79±0.25/2.01±0.25; IT, 1.61±0.13/1.74±0.19; IFT, 1.92±0.39/2.29±0.51; BW, 2.00±0.71/2.05±0.43; BT, 2.37±0.86/11.17±2.29; BFT, 1.83±0.50/15.73±1.78. No significant differences were seen after immersions (p>.05). Brushing increased the roughness of cp Ti and of Ti-6Al-4V (p<.01); cp Ti had topographic changes after BW, BT and BFT treatments whilst Ti-6Al-4V was significantly different only after BT and BTF. EDS has not detected fluoride or sodium ions on metal surfaces. Exposure to toothpastes (immersion) does not affect titanium per se; their use during brushing affects titanium topography and roughness. The associated effects of toothpaste abrasives and fluorides seem to increase roughness on titanium brushed surfaces. Copyright © 2012 Elsevier Ltd. All rights reserved.

Influence of Toothbrushing on the Antierosive Effect of Film-Forming Agents.

PubMed

Scaramucci, Taís; João-Souza, Samira Helena; Lippert, Frank; Eckert, George J; Aoki, Idalina V; Hara, Anderson T

2016-01-01

This study evaluated the influence of toothbrushing on the antierosive effect of solutions containing sodium fluoride (225 ppm/F), stannous chloride (800 ppm/Sn), sodium linear polyphosphate (2%/LPP), and their combinations, and deionized water as negative control (C). Solutions were tested in a 5-day erosion-remineralization-abrasion cycling model, using enamel and dentin specimens (n = 8). Erosion was performed 6 times/day for 5 min, exposure to the test solutions 3 times/day for 2min, and toothbrushing (or not) with toothpaste slurry 2 times/day for 2 min (45 strokes). Surface loss (SL) was determined by noncontact profilometry. Data were analyzed using three-way ANOVA (α = 0.05). Brushing caused more SL than no brushing for enamel (mean ± SD, in micrometers: 52.7 ± 6.6 and 33.0 ± 4.5, respectively), but not for dentin (28.2 ± 1.9 and 26.6 ± 1.8, respectively). For enamel without brushing, F+LPP+Sn showed the lowest SL (23.8 ± 3.4), followed by F+Sn (30.6 ± 4.9) and F+LPP (31.7 ± 1.7), which did not differ from each other. No differences were found between the other groups and C (37.8 ± 2.1). When brushing, F+LPP+Sn exhibited the lowest SL (36.7 ± 2.4), not differing from F+LPP (39.1 ± 1.8). F, F+Sn and LPP+Sn were similar (46.7 ± 2.9, 42.1 ± 2.8 and 45.3 ± 4.6, respectively) and better than C (52.7 ± 4.3). Sn (55.0 ± 2.4) and LPP (51.0 ± 4.3) did not differ from C. For dentin, neither groups differed from C, regardless of brushing. In conclusion, toothbrushing did not affect the antierosive effect of F+Sn, F+LPP and F+LPP+Sn on enamel, although overall it led to more erosion than nonbrushing. F and LPP+Sn showed a protective effect only under brushing conditions, whereas Sn and LPP did not exhibit any protection. For dentin, neither toothbrushing nor the test solutions influenced the development of erosion. © 2016 S. Karger AG, Basel.

Surface preparation effects on GTA (gas tungsten arc) weld penetration in JBK-75 stainless steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, R.D.; Heiple, C.R.; Sturgill, P.L.

1989-01-01

The results of a study are reported here on the effects of surface preparation on the shape of GTA welds on JBK-75, an austenitic precipitation hardenable stainless steel similar to A286. Minor changes in surface (weld groove) preparation produced substantial changes in the penetration characteristics and welding behavior of this alloy. Increased and more consistent weld penetration (higher d/w ratios) along with improved arc stability and less arc wander result from wire brushing and other abrasive surface preparations, although chemical and machining methods did not produce any improvement in penetration. Abrasive treatments roughen the surface, increase the surface area, andmore » increase the surface oxide thickness. The increased weld d/w ratio is attributed to oxygen added to the weld pool from the surface oxide on the base metal. The added oxygen alters the surface-tension driven fluid flow pattern in the weld pool. Similar results were observed with changes in filler wire surface oxide thickness, caused by changes in wire production conditions. 15 refs., 14 figs., 4 tabs.« less

'Bounce' Exposed

NASA Technical Reports Server (NTRS)

2004-01-01

This approximate true-color image, acquired by the Mars Exploration Rover Opportunity's panoramic camera, features the hole ground by the rover's rock abrasion tool into 'Bounce' rock. The hole measures approximately 35 centimeters (14 inches) long and 10 centimeters (4 inches) high. The depression measures 6.44 millimeters (0.25 inch) deep and about 4.5 centimeters (1.7 inches) across. The grinding procedure took place on the rover's 66th sol on Mars and lasted 2 hours and 15 minutes. A combination of limited solar power, added safety measures and the rock's jagged texture led the rock abrasion tool team to set more aggressive grinding parameters to ensure that the end result was a full circle, suitable for a thorough read from the rover's spectrometers.

Bounce's outer ring consists of the cuttings from the rock, pushed out by the brushes on the grinding instrument. The small impressions filled with red dust on the outer ring were caused by the instrument's contact mechanism, which serves to stabilize it while grinding.

This image was created using the panoramic camera's blue, green and red filters.

Associations between fluorosis of permanent incisors and fluoride intake from infant formula, other dietary sources and dentifrice during early childhood

PubMed Central

Levy, Steven M.; Broffitt, Barbara; Marshall, Teresa A.; Eichenberger-Gilmore, Julie M.; Warren, John J.

2017-01-01

Objectives The authors describe associations between dental fluorosis and fluoride intakes, with an emphasis on intake from fluoride in infant formula. Methods The authors administered periodic questionnaires to parents to assess early fluoride intake sources from beverages, selected foods, dentifrice and supplements. They assessed relationships between fluorosis of the permanent maxillary incisors and fluoride intake from beverages and other sources, both for individual time points and cumulatively using area-under-the-curve (AUC) estimates. The authors determined effects associated with fluoride in reconstituted powdered infant formulas, along with risks associated with intake of fluoride from dentifrice and other sources. Results Considering only fluoride intake from age 3 to 9 months, the authors found that participants with fluorosis (97 percent of which was mild) had significantly greater cumulative fluoride intake (AUC) from reconstituted powdered infant formula, other beverages with added water or a combination of these than did those without fluorosis. For participants aged 16 to 36 months, participants with fluorosis had significantly higher fluoride intake from water by itself, dentifrice or a combination of these than did those without fluorosis. In a model combining both the 3- to 9-month and 16- to 36-months age groups, the significant variables were fluoride intake from reconstituted powder concentrate formula (by participants aged 3–9 months), other beverages with added water (also by participants aged 3–9 months) and dentifrice (by participants aged 16–36 months). Conclusions Greater fluoride intakes from reconstituted powdered formulas (when participants were aged 3–9 months) and other water-added beverages (when participants were aged 3–9 months) increased fluorosis risk as did higher dentifrice intake by participants when aged 16 to 36 months. Clinical Implications Results suggest that prevalence of mild dental fluorosis could be reduced by avoiding ingestion of large quantities of fluoride from reconstituted powdered concentrate infant formula and fluoridated dentifrice. PMID:20884921

Fluoride Availability and Stability in Children's Toothpastes in Uruguay.

PubMed

Loureiro, Licet Alvarez; Fager, Anunzziatta Fabruccini; Santos Moreira, Maurício José; Maltz, Marisa; Hashizume, Lina Naomi

2017-05-15

The purpose of this study was to evaluate the availability and stability of fluoride in children's toothpastes in Uruguay. Six commercial brands of children's toothpaste available in Uruguay were tested. Analyses were made when the dentifrices were purchased (fresh samples) and after one year of storage (aged samples). Total fluoride (TF) and total soluble fluoride (TSF) concentrations were determined using an ion specific electrode. Four of the children's dentifrices showed TF concentration similar to that specified on the package. Three products showed similar concentrations of TF and TSF with no variations after the one-year storage period. Two dentifrices showed an initial insoluble fluoride concentration greater than 50 percent, which increased with toothpaste aging. Most tested toothpastes showed a decrease in the soluble fluoride content with aging. The high quantity of insoluble fluoride found in two tested dentifrices may compromise their anti-caries efficacy.

The global increase in dental caries. A pending public health crisis.

PubMed

Bagramian, Robert A; Garcia-Godoy, Franklin; Volpe, Anthony R

2009-02-01

A current review of the available epidemiological data from many countries clearly indicates that there is a marked increase in the prevalence of dental caries. This global increase in dental caries prevalence affects children as well as adults, primary as well as permanent teeth, and coronal as well as root surfaces. This increase in dental caries signals a pending public health crisis. Although there are differences of opinion regarding the cause of this global dental caries increase, the remedy is well known: a return to the public health strategies that were so successful in the past, a renewed campaign for water fluoridation, topical fluoride application, the use of fluoride rinses, a return to school oral health educational programs, an emphasis on proper tooth brushing with a fluoride dentifrice, as well as flossing, a proper diet and regular dental office visits. If these remedies are not initiated, there could be a serious negative impact upon the future oral health (and systemic health) of the global community, as well as a strain on the dental profession along with a major increase in the cost of dental services.

21 CFR 211.132 - Tamper-evident packaging requirements for over-the-counter (OTC) human drug products.

Code of Federal Regulations, 2014 CFR

2014-04-01

... dermatological, dentifrice, insulin, or lozenge product) for retail sale that is not packaged in a tamper..., dentifrice, insulin, or lozenge product) for retail sale shall package the product in a tamper-evident...

21 CFR 211.132 - Tamper-evident packaging requirements for over-the-counter (OTC) human drug products.

Code of Federal Regulations, 2012 CFR

2012-04-01

... dermatological, dentifrice, insulin, or lozenge product) for retail sale that is not packaged in a tamper..., dentifrice, insulin, or lozenge product) for retail sale shall package the product in a tamper-evident...

21 CFR 211.132 - Tamper-evident packaging requirements for over-the-counter (OTC) human drug products.

Code of Federal Regulations, 2013 CFR

2013-04-01

... dermatological, dentifrice, insulin, or lozenge product) for retail sale that is not packaged in a tamper..., dentifrice, insulin, or lozenge product) for retail sale shall package the product in a tamper-evident...

21 CFR 211.132 - Tamper-evident packaging requirements for over-the-counter (OTC) human drug products.

Code of Federal Regulations, 2010 CFR

2010-04-01

... dermatological, dentifrice, insulin, or lozenge product) for retail sale that is not packaged in a tamper..., dentifrice, insulin, or lozenge product) for retail sale shall package the product in a tamper-evident...

21 CFR 211.132 - Tamper-evident packaging requirements for over-the-counter (OTC) human drug products.

Code of Federal Regulations, 2011 CFR

2011-04-01

... dermatological, dentifrice, insulin, or lozenge product) for retail sale that is not packaged in a tamper..., dentifrice, insulin, or lozenge product) for retail sale shall package the product in a tamper-evident...

A randomised study to compare salivary pH, calcium, phosphate and calculus formation after using anticavity dentifrices containing Recaldent(®) and functionalized tri-calcium phosphate.

PubMed

Sharma, Ena; Vishwanathamurthy, Ramesh Alampalli; Nadella, Manjari; Savitha, A N; Gundannavar, Gayatri; Hussain, M Ahad

2012-10-01

The aim of this study was to estimate the pH of saliva, concentration of calcium and inorganic phosphate, and calculus formation before and after usage of Recaldent(®) (GC Tooth Mousse Plus™), Functionalized Tricalcium Phosphate (3M ESPE ClinPro™ Tooth Crème) and standard dentifrice (Colgate dental cream). Randomized double-blind study. A total of 50 subjects were recruited, the subjects were assessed at their first visit, on the 21(st) day and on the 42(nd) day. At the first visit, scaling was carried out and oral hygiene instructions were given. After 21 days, the subjects were given coded dentifrices where the operator and the subjects both were unaware of the type of dentifrice. Clinical parameters assessed were Plaque index, Gingival index, and Calculus index. Salivary samples were obtained to measure calcium, phosphate levels, and pH at 21(st) day and 42(nd) day. ANOVA test, t-test, Mann-Whitney test, Kruskal-Wallis test. The mean salivary calcium level and mean salivary phosphate level were higher in Group III (functionalized tricalcium phosphate (3M ESPE ClinPro™ Tooth Creme) as compared to Group II (Recaldent(®) GC Tooth Mousse Plus™) and Group I (Colgate dental cream) on the 42(nd) day after using dentifrices, which was statistically significant. This showed that the usage of remineralizing dentifrices led to an increase in the salivary calcium, phosphate, and pH but it did not reach the level of super saturation of the ions caused by elevated pH which could lead to calculus formation. Thought here was a statistically significant increase in salivary calcium and phosphate level in all three groups from baseline to 42(nd) day, there was no calculus formation.

Two sampling methods yield distinct microbial signatures in the nasopharynges of asthmatic children.

PubMed

Pérez-Losada, Marcos; Crandall, Keith A; Freishtat, Robert J

2016-06-16

The nasopharynx is a reservoir for pathogens associated with respiratory illnesses, such as asthma. Next-generation sequencing (NGS) has been used to characterize the nasopharyngeal microbiome during health and disease. Most studies so far have surveyed the nasopharynx as a whole; however, less is known about spatial variation (biogeography) in nasal microenvironments and how sampling techniques may capture that microbial diversity. We used targeted 16S rRNA MiSeq sequencing and two different sampling strategies [nasal washes (NW) and nasal brushes (NB)] to characterize the nasopharyngeal microbiota in 30 asthmatic children. Nasal brushing is more abrasive than nasal washing and targeted the inner portion of the inferior turbinate. This region is expected to be different from other nasal microenvironments. Nasal washing is not spatially specific. Our 30 × 2 nasal microbiomes generated 1,474,497 sequences, from which we identified an average of 157 and 186 OTUs per sample in the NW and NB groups, respectively. Microbiotas from NB showed significantly higher alpha-diversity than microbiotas from NW. Similarly, both nasal microbiotas were distinct from each other (PCoA) and significantly differed in their community composition and abundance in at least 9 genera (effective size ≥1 %). Nasopharyngeal microenvironments in asthmatic children contain microbiotas with different diversity and structure. Nasal washes and brushes capture that diversity differently. Future microbial studies of the nasopharynx need to be aware of potential spatial variation (biogeography).

Experimental gingivitis, bacteremia and systemic biomarkers: a randomized clinical trial.

PubMed

Kinane, D F; Zhang, P; Benakanakere, M; Singleton, J; Biesbrock, A; Nonnenmacher, C; He, T

2015-12-01

Bacteremia and systemic inflammatory markers are associated with periodontal and systemic diseases and may be linking mechanisms between these conditions. We hypothesized that in the development of gingival inflammation, systemic markers of inflammation and bacteremia would increase. To study the effect of bacteremia on systemic inflammatory markers, we recruited 80 subjects to participate in an experimental gingivitis study. Subjects were stratified based on gender, smoking and the number of bleeding sites and then randomized to one of two groups: control group (n = 40) or experimental gingivitis group (n = 40). Subjects in the control group conducted an oral hygiene regimen: brushing twice daily with a regular sodium fluoride cavity protection dentifrice and a standard manual toothbrush, flossing twice daily, and mouth rinsing with an anti-cavity fluoride rinse once daily. The experimental group stopped brushing and flossing, and used only the fluoride anti-cavity mouth rinse for 21 d. Seventy-nine of 80 subjects were evaluable. One subject in the control group was excluded from the results due to antibiotic use during the study. Our data showed the experimental gingivitis group exhibited a significant (p < 0.05) increase in dental plaque level and gingival inflammatory indices relative to baseline and the control group but a decrease in bacteremia and soluble intercellular adhesion molecule-1 levels vs. baseline. Bacteremia was negatively correlated with gingival inflammatory indices and soluble intercellular adhesion molecule-1 levels in the experimental gingivitis group, thus negating our hypothesis. We conclude that there are marked differences in systemic cytokine levels over the course of short-term experimentally induced gingivitis and further conclude that a long-term periodontitis study must be considered to address mechanisms whereby oral diseases may affect systemic diseases. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Clinical effect of a mouthwash containing Anacardium occidentale Linn. on plaque and gingivitis control: A randomized controlled trial.

PubMed

Gomes, Carlos Eduardo Bezerra; Cavalcante, Dhiogo Gonçalves; Filho, José Eduardo Girão; da Costa, Flávio Nogueira; da Silva Pereira, Sérgio Luís

2016-01-01

Plaque-associated gingivitis is a prevalent disease and research in its treatment using herbal agents must be encouraged to verify which would be a useful addition to the current range or chemotherapeutic treatment options. The aim of this study was to evaluate the clinical effect of a mouth rinse containing 10% Anacardium occidentale (AO) Linn., a typical plant commonly found in the Northeast Region of Brazil, on the reduction of plaque and gingivitis in comparison to a gold-standard chemotherapeutic agent. Thirty normosystemic adult volunteers of both genders, who had a minimum of twenty natural teeth, aging between 18 and 32 years, were enrolled in this crossover, controlled, examiner-blind clinical study. They were randomly allocated into three groups: 10% AO Linn. (n = 10); 0.12% chlorhexidine digluconate (CLX, n = 10); or placebo (PB, n = 10). All volunteers were instructed to brush their teeth with a fluoridated dentifrice two times a day (12/12 h) and to rinse for 1 min with one of the mouthwashes (AO, CLX, or PB) 30 min after tooth brushing for 1 month. Plaque index (PLI) and gingival bleeding index (BLI) were recorded on days 0 and 30. Nonparametric Kruskal-Wallis and Wilcoxon tests (α = 0.05) were performed to evaluate statistical differences among groups. There was a significant reduction (P < 0.05) on plaque and gingivitis at day 30 just in CLX ([PLI = 0.47 ± 0.16; -30%]; [BLI = 0.15 ± 0.09; -55.8%]) and AO ([PLI = 0.49 ± 0.21; -31%]; [BLI = 0.13 ± 0.10; -56.6%]) groups, but no statistically significant difference was observed among them (P > 0.05). Mouthwash containing 10% AO was effective as an antiplaque and antigingivitis agent, in a similar manner that 0.12% CLX.

Effect of sodium lauryl sulfate on recurrent aphthous stomatitis: a randomized controlled clinical trial.

PubMed

Shim, Y J; Choi, J-H; Ahn, H-J; Kwon, J-S

2012-10-01

To compare the effects of sodium lauryl sulfate (SLS)-free and SLS-containing dentifrice in patient with recurrent aphthous stomatitis (RAS). The design of this study was a double-blind crossover trial. The 90 subjects were divided into three groups: group I used SLS-free (a commercially available SLS-free dentifrice) and SLS-A (SLS-free + 1.5% SLS), group II used SLS-A and SLS-B (a commercially available 1.5% SLS-containing dentifrice), and group III used SLS-free and SLS-B. The subjects used one of the two assigned dentifrices for 8 weeks and then the other for the following 8 weeks. The order of the dentifrices used was selected at random, and there was a 2-week washout period between the two phases. The clinical parameters (number of ulcers, number of episodes, duration of ulcers, mean pain score) were compared between the two phases for each group. The number of ulcers and episodes did not differ significantly between SLS-A, SLS-B, and SLS-free. Only duration of ulcers and mean pain score was significantly decreased during the period using SLS-free. Although SLS-free did not reduce the number of ulcers and episodes, it affected the ulcer-healing process and reduces pain in daily lives in patients with RAS. © 2012 John Wiley & Sons A/S.

Antimicrobial effects of a new therapeutic liquid dentifrice formulation on oral bacteria including odorigenic species.

PubMed

Sreenivasan, P K; Furgang, D; Zhang, Y; DeVizio, W; Fine, D H

2005-03-01

The control of oral malodor is well-recognized in efforts to improve oral health. Antimicrobial formulations can mitigate oral malodor, however, procedures to assess effects on oral bacteria including those implicated in halitosis are unavailable. This investigation examined the antimicrobial effects of a new liquid triclosan/copolymer dentifrice (test) formulation that demonstrated significant inhibition of oral malodor in previous organoleptic clinical studies. Procedures compared antimicrobial effects of the test and control formulations on a range of oral micro-organisms including members implicated in halitosis, substantive antimicrobial effects of formulations with hydroxyapatite as a surrogate for human teeth and ex vivo effects on oral bacteria from human volunteers. With Actinomyces viscosus, as a model system, the test formulation demonstrated a dose-dependent effect. At these concentrations the test formulation provided significant antimicrobial effects on 13 strains of oral bacteria including those implicated in bad breath at selected posttreatment time points. Treatment of hydroxyapatite by the test dentifrice resulted in a significant and substantive antimicrobial effect vs. controls. Oral bacteria from subjects treated ex vivo with the test dentifrice resulted in significant reductions in cultivable oral bacteria and odorigenic bacteria producing hydrogen sulfide. In summary, microbiological methods adapted to study odorigenic bacteria demonstrate the significant antimicrobial effects of the test (triclosan/copolymer) dentifrice with laboratory and clinical strains of oral bacteria implicated in bad breath.

The influence of a dentifrice containing a zinc salt and a nonionic antimicrobial agent on the maintenance of gingival health.

PubMed

Svatun, B; Saxton, C A; van der Ouderaa, F; Rölla, G

1987-09-01

The purpose of the present investigation was to test the concept that a dentifrice containing zinc citrate and Triclosan could maintain gingival health. The gingival health of 101 young predominately female student nurses in Oslo was brought to a high level by professional cleaning supported by oral hygiene instruction. The criterion of gingival health was less than or equal to 5 elicited bleeding sites from a full mouth assessment. The mean bleeding value attained for the whole group was 3.5. 2 balanced groups were formed, based on the initial number of elicited bleeding sites and plaque values. One group used the test dentifrice and the other group the placebo for 6 months, with an intermediate assessment after 3 months. The placebo group failed to maintain the standard of oral hygiene and gingival health that had been achieved by professional care. In contrast, the group using the test dentifrice for 6 months exhibited similar levels of plaque and gingival health to that observed at baseline following oral hygiene instruction. After 6 months, less than 7% of the subjects in the placebo group possessed healthy gingivae in contrast to 60% of the test group. Thus a dentifrice containing a zinc salt and nonionic germicide had successfully maintained gingival health in a group of young adults.

Brushing-Induced Surface Roughness of Two Nickel Based Alloys and a Titanium Based Alloy: A Comparative Study - In Vitro Study

PubMed Central

Acharya, B L Guruprasanna; Nadiger, Ramesh; Shetty, Bharathraj; Gururaj, G; Kumar, K Naveen; Darshan, D D

2014-01-01

Background: Alloys with high nickel content have been increasingly used in dentistry. Alloys have high corrosion rates when exposed to chemical or physical forces that are common intra orally. Titanium is the most biocompatible materials for crowns, fixed partial dentures and implants in the present use, but paradoxically the self-protective oxide film on the titanium can be affected by excessive use of the most common preventive agents in dentistry. Therefore, this study is undertaken in order to draw attention toward the potential effect of prophylactic brushing in a saline medium. Materials and Methods: Forty-five wax patterns in equal dimensions of 10 mm × 10 mm × 2 mm were cast in titanium (Grade II) and nickel-chromium. Of the 45 wax patterns, 15 wax patterns were used for preparing cast titanium samples and 30 wax patterns were used for preparing cast nickel-chromium samples and polished. These samples were divided into three groups of 15 samples each. They are brushed for 48 h each clinically simulating 2 years of brushing in a saline tooth paste medium. The surface roughnesses of the samples were evaluated using profilometer, scanning electron microscopes and energy dispersive spectroscopy. Results were subjected to statistical analysis. Results: The statistical analysis of the Rz and Ra surface roughness values were calculated. Significant difference of surface roughness was present in the titanium samples compared to that of the machine-readable cataloguing and Wirolloy (nickel-chromium) samples after the study. To know the difference in the values of all samples before and after, Student’s paired t-test was carried out. Results showed that there is a significant change in the Rz and Ra values of titanium samples. Conclusion: The present findings suggest that, prophylactic brushing with the fluoridated toothpaste have an effect on the surface roughness of titanium and also to a certain extent, on nickel-chromium. Therefore, careful consideration must be given to the selection of the toothbrushes and toothpastes with the medium abrasives in patients with these restorations. How to cite the article: Acharya BL, Nadiger R, Shetty B, Gururaj G, Kumar KN, Darshan DD. Brushing induced surface roughness of two nickel based alloys and a titanium based alloy: A comparative study - In vitro study. J Int Oral Health 2014;6(3):36-49. PMID:25083031

Recommendation for a non-animal alternative to rat caries testing.

PubMed

Featherstone, John D B; Stookey, George K; Kaminski, Michael A; Faller, Robert V

2011-10-01

As a requirement of the Food & Drug Administration's final monograph on "Anticaries drug products for over-the-counter human use", the toothpaste industry has been conducting animal caries tests on every fluoride-containing toothpaste introduced into the U.S. market since 1996. The practice of testing in animals, although required by law, is in stark conflict with the corporate policy of many U.S. and global toothpaste manufacturers, in which, if possible, alternatives to animal testing are utilized. A provision does exist within the regulation which allows the use of an alternative method to demonstrate efficacy. However, to take advantage of this provision, a petition must be submitted to the FDA and in this petition data demonstrating the alternative provides results of "equivalent accuracy" must be included. After many years of research, model development and model comparisons, we have identified one particular laboratory model that demonstrated excellent correlation with the currently accepted animal caries models. This model, known as the Featherstone pH cycling model, is discussed in this paper. The Featherstone pH cycling model has been shown to produce results of equivalent accuracy to the animal caries model by: (1) demonstrating a clinically relevant fluoride dose response similar to that shown in the animal caries model (including 1100 ppm F, 250 ppm F and placebo); (2) demonstrating similar results to the animal caries model for clinically proven dentifrice formulations relative to positive and negative controls; (3) demonstrating discriminating ability in strong agreement with the animal caries model for differentiating between a dentifrice formulation with attenuated fluoride activity and a USP standard; and (4) providing a clinically relevant representation of the caries process, as demonstrated by orthodontic banding studies. In addition, the model sufficiently addresses both salivary and abrasive/anticalculus agent interference concerns. For more than 50 years, fluoride has been the first defense in the fight against dental caries. The clinical effectiveness of fluoride is well accepted and documented extensively in the literature. The mechanism through which fluoride provides its benefit is very straightforward and well understood. The proposed laboratory model effectively simulates the effect of the caries process and has been shown to demonstrate equivalent accuracy to animal caries. This indicates that there are strong scientific grounds for the use of this model as an alternative to the animal caries test. Based on the strength of the data and the correlations noted between the two models, we recommend that the scientific community and the toothpaste industry broadly accept the Featherstone laboratory pH cycling model as an appropriate alternative to animal testing, particularly for ionic fluoride based dentifrices.

Impact of Sn/F Pre-Treatments on the Durability of Protective Coatings against Dentine Erosion/Abrasion

PubMed Central

Ganss, Carolina; Lussi, Adrian; Peutzfeldt, Anne; Naguib Attia, Nader; Schlueter, Nadine

2015-01-01

For preventing erosive wear in dentine, coating with adhesives has been suggested as an alternative to fluoridation. However, clinical studies have revealed limited efficacy. As there is first evidence that Sn2+ increases bond strength of the adhesive Clearfil SE (Kuraray), the aim of the present study was to investigate whether pre-treatment with different Sn2+/F− solutions improves the durability of Clearfil SE coatings. Dentine samples (eight groups, n=16/group) were freed of smear layer (0.5% citric acid, 10 s), treated (15 s) either with no solution (control), aminefluoride (AmF, 500 ppm F−, pH 4.5), SnCl2 (800/1600 ppm Sn2+; pH 1.5), SnCl2/AmF (500 ppm F−, 800 ppm Sn2+, pH 1.5/3.0/4.5), or Elmex Erosion Protection Rinse (EP, 500 ppm F−, 800 ppm Sn2+, pH 4.5; GABA International), then rinsed with water (15 s) and individually covered with Clearfil SE. Subsequently the specimens were subjected to an erosion/abrasion protocol consisting of 1320 cycles of immersion in 0.5% citric acid (5°C/55°C; 2 min) and automated brushing (15 s, 200 g, NaF-toothpaste, RDA 80). As the coatings proved stable up to 1320 cycles, 60 modified cycles (brushing time 30 min/cycle) were added. Wear was measured profilometrically. After SnCl2/AmF, pH 4.5 or EP pre-treatment all except one coating survived. In the other groups, almost all coatings were lost and there was no significant difference to the control group. Pre-treatment with a Sn2+/F− solution at pH 4.5 seems able to improve the durability of adhesive coatings, rendering these an attractive option in preventing erosive wear in dentine. PMID:26075906

Examining the prevalence and characteristics of abfractionlike cervical lesions in a population of U.S. veterans.

PubMed

Piotrowski, B T; Gillette, W B; Hancock, E B

2001-12-01

Abfraction is believed to be caused by biomechanical loading forces. It may be due to flexure and ultimate fatigue of tooth tissues that occur away from the point of occlusal loading. Other possible causes of cervical lesions include toothbrush abrasion and erosion. The purpose of this study was to investigate the characteristics and prevalence of abfraction-like lesions in a population of U.S. veterans. The authors evaluated 103 teeth with noncarious cervical lesions in 32 subjects and characterized them based on the surface on which the lesion was located, history of toothbrush abrasion, size of the lesion, presence of plaque, surface texture, and presence and size of occlusal wear facets. Clinical examination revealed that adjacent control teeth had a significantly lower percentage of surfaces with plaque than did teeth with cervical lesions. Control teeth also had significantly less gingival recession than did affected teeth. Seventy-five percent of subjects reported a history of using a firm toothbrush, and 78.1 percent reported using a brushing technique that is known to cause toothbrush abrasion in the affected area. Affected teeth had neither significantly different occlusal wear facets nor occlusal contacts than control teeth. No significant correlations were found between cervical lesion dimensions and facet area. Toothbrush abrasion is strongly suspected as contributing to the formation of the majority of wedge-shaped lesions in this group of subjects. A small subset of lesions is thought to have resulted from some other phenomenon. Although the presence or contribution of occlusal stresses in the direct formation of these lesions could not be measured directly, the possibility of abfraction could not be eliminated. Because the existence of abfraction could not be ruled out in about 15 percent of the cases, teeth with noncarious, wedge-shaped lesions warrant careful occlusal evaluation, with the possible need for occlusal adjustment or bitesplint therapy to treat bruxism.

Influence of mechanical instruments on the biocompatibility of titanium dental implants surfaces: a systematic review.

PubMed

Louropoulou, Anna; Slot, Dagmar E; Van der Weijden, Fridus

2015-07-01

The objective of this systematic review was to evaluate the effect of mechanical instruments on the biocompatibility of titanium dental implant surfaces. MEDLINE, Cochrane-CENTRAL and EMBASE databases were searched up to December 2013, to identify controlled studies on the ability of cells to adhere and colonize non-contaminated and contaminated, smooth and rough, titanium surfaces after instrumentation with different mechanical instruments. A comprehensive search identified 1893 unique potential papers. Eleven studies met the inclusion criteria and were selected for this review. All studies were in vitro studies. Most studies used titanium discs, strips and cylinders. The air abrasive was the treatment mostly evaluated. The available studies had a high heterogeneity which precluded any statistical analysis of the data. Therefore, the conclusions are not based on quantitative data. Instrumentation seems to have a selective influence on the attachment of different cells. In the presence of contamination, plastic curettes, metal curettes, rotating titanium brushes and an ultrasonic scaling system with a carbon tip and polishing fluid seem to fail to restore the biocompatibility of rough titanium surfaces. The air-powder abrasive system with sodium bicarbonate powder does not seem to affect the fibroblast-titanium surface interaction after treatment of smooth or rough surfaces, even in the presence of contamination. The available data suggest that treatment with an air-powder abrasive system with sodium bicarbonate powder does not seem to adversely affect the biocompatibility of titanium dental implant surfaces. However, the clinical impact of these findings requires further clarification. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effect of fluoride dentifrice and casein phosphopeptide-amorphous calcium phosphate cream with and without fluoride in preventing enamel demineralization in a pH cyclic study.

PubMed

Sinfiteli, Priscila de Pinto; Coutinho, Thereza Christina Lopes; Oliveira, Patrícia Regina Almeida de; Vasques, Wesley Felisberto; Azevedo, Leandra Matos; Pereira, André Maues Brabo; Tostes, Monica Almeida

2017-01-01

Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) complexes are anticariogenic and capable of remineralizing the early stages of enamel lesions. The use of fluoride prevents dental decay and the association of CPP-ACP with fluoride can increase remineralization. To evaluate the effect of CPP-ACP and CPP-ACPF creams associated with a fluoride dentifrice to prevent enamel demineralization in a pH cyclic model. Previously selected by surface microhardness (SH) analysis, human enamel blocks (n = 56) were submitted to daily treatment with dentifrice in a pH-cycling model. The enamel blocks were divided into four groups; G1: Crest™ Cavity Protection - Procter & Gamble (1,100 ppmF of NaF); G2: Crest™ +MI Paste (MP) - Recaldent™ GC Corporation Tokyo, Japan); G3: Crest™ + MI Paste Plus (MPP) - Recaldent™ 900 ppm as NaF, GC Corporation Tokyo, Japan), and G4: control, saliva. Specimens were soaked alternatively in a demineralizing solution and in artificial saliva for 5 d. The fluoride dentifrice, with proportion of 1:3 (w/w), was applied three times for 60 s after the remineralization period. The undiluted MP and MPP creams were applied for 3 m/d. After cycling, SH was re-measured and cross section microhardness measurements were taken. The SH values observed for the groups G3 (257±70), G1 (205±70), and G2 (208±84) differed from the G4 group (98±110) (one-way ANOVA and Tukey's post hoc test). There were no differences between the groups G1xG2, G2xG3, and G1xG3 for demineralization inhibition. The percentage of volume mineral showed that, when applied with fluoride dentifrice, MPP was the most effective in preventing enamel demineralization at 50 µ from the outer enamel surface (Kruskal-Wallis and Mann Whitney p<0.05). Fluoride dentifrice associated with CPP-ACPF inhibited subsurface enamel demineralization.

Prevention of dentine erosion by brushing with anti-erosive toothpastes.

PubMed

Aykut-Yetkiner, Arzu; Attin, Thomas; Wiegand, Annette

2014-07-01

This in vitro study aimed to investigate the preventive effect of brushing with anti-erosive toothpastes compared to a conventional fluoride toothpaste on dentine erosion. Bovine dentine specimens (n=12 per subgroup) were eroded in an artificial mouth (6 days, 6×30 s/day) using either citric acid (pH:2.5) or a hydrochloric acid/pepsin solution (pH:1.6), simulating extrinsic or intrinsic erosive conditions, respectively. In between, the specimens were rinsed with artificial saliva. Twice daily, the specimens were brushed for 15 s in an automatic brushing machine at 2.5 N with a conventional fluoride toothpaste slurry (elmex, AmF) or toothpaste slurries with anti-erosive formulations: Apacare (NaF/1% nHAP), Biorepair (ZnCO3-HAP), Chitodent (Chitosan), elmex Erosionsschutz (NaF/AmF/SnCl2/Chitosan), mirasensitive hap (NaF/30% HAP), Sensodyne Proschmelz (NaF/KNO3). Unbrushed specimens served as control. Dentine loss was measured profilometrically and statistically analysed using two-way and one-way ANOVA followed by Scheffe's post hoc tests. RDA-values of all toothpastes were determined, and linear mixed models were applied to analyse the influence of toothpaste abrasivity on dentine wear (p<0.05). Dentine erosion of unbrushed specimens amounted to 5.1±1.0 μm (extrinsic conditions) and 12.9±1.4 μm (intrinsic conditions). All toothpastes significantly reduced dentine erosion by 24-67% (extrinsic conditions) and 21-40% (intrinsic conditions). Biorepair was least effective, while all other toothpastes were not significantly different from each other. Linear mixed models did not show a significant effect of the RDA-value of the respective toothpaste on dentine loss. Toothpastes with anti-erosive formulations reduced dentine erosion, especially under simulated extrinsic erosive conditions, but were not superior to a conventional fluoride toothpaste. Copyright © 2014 Elsevier Ltd. All rights reserved.

Possible Ni-Rich Mafic-Ultramafic Magmatic Sequence in the Columbia Hills: Evidence from the Spirit Rover

NASA Technical Reports Server (NTRS)

Mittlefehldt, David W.; Gellert, R.; McCoy, T.; McSween, H. Y., Jr.; Li, R.

2006-01-01

The Spirit rover landed on geologic units of Hesperian age in Gusev Crater. The Columbia Hills rise above the surrounding plains materials, but orbital images show that the Columbia Hills are older [1, 2]. Spirit has recently descended the southeast slope of the Columbia Hills doing detailed measurements of a series of outcrops. The mineralogical and compositional data on these rocks are consistent with an interpretation as a magmatic sequence becoming increasingly olivine-rich down slope. The outcrop sequence is Larry s Bench, Seminole, Algonquin and Comanche. The "teeth" on the Rock Abrasion Tool (RAT) wore away prior to arrival at Larry s Bench; the data discussed are for RAT brushed surfaces.

A surface physicochemical rationale for calculus formation in the oral cavity

NASA Astrophysics Data System (ADS)

Busscher, Henk J.; White, Don J.; Kamminga-Rasker, Hannetta J.; van der Mei, Henny C.

2004-01-01

Surface free energies of dental hard tissues, including salivary conditioning films on enamel, play a crucial role in mineralization, dissolution and adhesion processes at the tooth surface. These mineralization reactions at oral surfaces control the development and progression of various diseases. In this paper, we compare the surface free energies, as derived from measured contact angles with liquids, of salivary conditioning films on enamel after exposure to dentifrices with and without anti-calculus additives, such as hexametaphosphate, pyrophosphate or zinc citrate trihydrate. Measured contact angles were converted to surface free energies using the concept of Lifshitz-Van der Waals and Lewis acid-base components. Nearly all dentifrices yield film properties with a negative interfacial tension against an aqueous phase, which thermodynamically opposes mineralization. Concurrent with negative interfacial tensions, are positive values of the interfacial free energy of adhesion for octacalcium-phosphate (OCP) to the film surfaces, indicating that adhesion of newly mineralized, calcium-phosphate rich phases is thermodynamically unfavorable. Interestingly, two out of the three dentifrices with anti-calculus additives containing hexametaphosphate and pyrophosphate cause most positive interfacial free energies for OCP adhesion of 5.8 and 2.6 mJ/m 2, respectively. In summary, surface thermodynamical analyses indicate that anti-calculus effects of commercial dentifrice formulations are consistent with more negative interfacial tensions of salivary conditioning films on enamel surfaces and thus with more positive values for the interfacial free energy of adhesion toward newly formed mineral phases. A dentifrice containing hexametaphosphate yielded thermodynamic properties of salivary conditioning films most unfavorable for calculus formation.

Remineralization Potential of Three Tooth Pastes on Enamel Caries.

PubMed

Singhal, Rajnish K; Rai, Balwant

2017-08-15

Different formulations of dentifrices exist in the market. Usually, single toothpaste is used by all family members including children. There is a big concern of fluoride ingestion with the toothpaste containing high fluoride content in children. Recently, new toothpaste (including toothpaste) with remineralization potential without fluoride content has been formulated. There is an urgent need to compare remineralization potential of this new formulation with the exiting dentifrices. Therefore, the present study has been undertaken to assess and compare the remineralization potential of three dentifrices with different compositions on artificially induced carious lesions in vitro by using scanning electron microscopy and polarised light microscopy. The present in vitro study was conducted on 21 healthy extracted primary central incisor teeth surfaces, which were divided into three groups and were treated by three different dentifrices. Artificial demineralization was followed by remineralization using dentifrice slurry as per the group distribution. All the samples were studied for remineralization by using scanning electron microscopy and polarised light microscopy. Data were analysed using SPSS version 11 software. A significant difference was found between the remineralization potential of incudent toothpaste and other toothpaste groups based on the analysis of polarised light microscopy and stereomicroscope. The remineralizing ability of incudent toothpaste for artificial enamel lesions was found to be significantly higher than that of Colgate® and Crest toothpaste. The limitations of this study include, being a short term study, low sample size and in vitro experiment. incudent toothpaste has exhibited a higher remineralizing potential as compared to fluoride based toothpaste in our study.

Remineralization of eroded enamel by a NaF rinse containing a novel calcium phosphate agent in an in situ model: a pilot study

PubMed Central

Amaechi, Bennett T; Karthikeyan, Ramalingam; Mensinkai, Poornima K; Najibfard, Kaveh; Mackey, Allen C; Karlinsey, Robert L

2010-01-01

Purpose An in situ study evaluated the remineralization potential of 225 ppm fluoride (F) rinses with and without a calcium phosphate agent (TCP-Si-Ur) on eroded enamel. Methods 20 human patients participated in this IRB approved study. Enamel blocks extracted from 20 human molars were assigned to each of the three study phases (G1, G2, G3). Each block was eroded using 1% citric acid (pH = 2.5), with a slice cut from each block to establish baseline lesion parameters (ie, integrated mineral loss ΔZ, and lesion depth LD) using transverse microradiography (TMR). Participants and assigned blocks were randomly divided into three 28-day phases. The blocks were mounted into modified orthodontic brackets and bonded to the buccal surface of one of the subject’s mandibular molars. The appliance remained in the subject’s mouth for 28 days. Prior to each study phase, participants observed a one-week-washout period using a fluoride-free dentifrice. In each phase, participants brushed with the fluoride-free dentifrice for 1 min, followed by one of the following coded treatments: G1: 225 ppm F + 40 ppm TCP-Si-Ur rinse (1 min); G2: 225 ppm F rinse (1 min); G3: no rinse (saliva-only). After each phase, appliances were removed and specimens were analyzed using TMR. Results TMR data (ie, ΔZ and LD) revealed all three groups significantly remineralized eroded enamel (paired t-tests, P < 0.001). Net mineralization (% change in ΔZ, LD) were as follows (mean (std.dev): G1: 44.1 (22.6), 30.5 (27.0); G2: 30.0 (7.4), 29.4 (10.5); G3: 23.8 (16.4), 25.7 (15.5). Furthermore, G1 was found to cause significantly more remineralization than G2 (P = 0.039) and G3, (P = 0.002). Conclusion Mouthrinse containing 225 ppm F plus TCP-Si-Ur provided significantly greater remineralization relative to 225 ppm F only or saliva alone. PMID:23662086

Robust Superhydrophobic Graphene-Based Composite Coatings with Self-Cleaning and Corrosion Barrier Properties.

PubMed

Nine, Md J; Cole, Martin A; Johnson, Lucas; Tran, Diana N H; Losic, Dusan

2015-12-30

Superhydrophobic surfaces for self-cleaning applications often suffer from mechanical instability and do not function well after abrasion/scratching. To address this problem, we present a method to prepare graphene-based superhydrophobic composite coatings with robust mechanical strength, self-cleaning, and barrier properties. A suspension has been formulated that contains a mixture of reduced graphene oxide (rGO) and diatomaceous earth (DE) modified with polydimethylsiloxane (PDMS) that can be applied on any surface using common coating methods such as spraying, brush painting, and dip coating. Inclusion of TiO2 nanoparticles to the formulation shows further increase in water contact angle (WCA) from 159 ± 2° to 170 ± 2° due to the structural improvement with hierarchical surface roughness. Mechanical stability and durability of the coatings has been achieved by using a commercial adhesive to bond the superhydrophobic "paint" to various substrates. Excellent retention of superhydrophobicity was observed even after sandpaper abrasion and crosscut scratching. A potentiodynamic polarization study revealed excellent corrosion resistance (96.78%) properties, and an acid was used to provide further insight into coating barrier properties. The ease of application and remarkable properties of this graphene-based composite coating show considerable potential for broad application as a self-cleaning and protective layer.

Effect of fluoride dentifrice and casein phosphopeptide-amorphous calcium phosphate cream with and without fluoride in preventing enamel demineralization in a pH cyclic study

PubMed Central

Sinfiteli, Priscila de Pinto; Coutinho, Thereza Christina Lopes; de Oliveira, Patrícia Regina Almeida; Vasques, Wesley Felisberto; Azevedo, Leandra Matos; Pereira, André Maues Brabo; Tostes, Monica Almeida

2017-01-01

Abstract Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) complexes are anticariogenic and capable of remineralizing the early stages of enamel lesions. The use of fluoride prevents dental decay and the association of CPP-ACP with fluoride can increase remineralization. Objective: To evaluate the effect of CPP-ACP and CPP-ACPF creams associated with a fluoride dentifrice to prevent enamel demineralization in a pH cyclic model. Material and Methods: Previously selected by surface microhardness (SH) analysis, human enamel blocks (n = 56) were submitted to daily treatment with dentifrice in a pH-cycling model. The enamel blocks were divided into four groups; G1: Crest™ Cavity Protection - Procter & Gamble (1,100 ppmF of NaF); G2: Crest™ +MI Paste (MP) - Recaldent™ GC Corporation Tokyo, Japan); G3: Crest™ + MI Paste Plus (MPP) - Recaldent™ 900 ppm as NaF, GC Corporation Tokyo, Japan), and G4: control, saliva. Specimens were soaked alternatively in a demineralizing solution and in artificial saliva for 5 d. The fluoride dentifrice, with proportion of 1:3 (w/w), was applied three times for 60 s after the remineralization period. The undiluted MP and MPP creams were applied for 3 m/d. After cycling, SH was re-measured and cross section microhardness measurements were taken. Results: The SH values observed for the groups G3 (257±70), G1 (205±70), and G2 (208±84) differed from the G4 group (98±110) (one-way ANOVA and Tukey's post hoc test). There were no differences between the groups G1xG2, G2xG3, and G1xG3 for demineralization inhibition. The percentage of volume mineral showed that, when applied with fluoride dentifrice, MPP was the most effective in preventing enamel demineralization at 50 µ from the outer enamel surface (Kruskal-Wallis and Mann Whitney p<0.05). Conclusion: Fluoride dentifrice associated with CPP-ACPF inhibited subsurface enamel demineralization. PMID:29211281

The effect of different cleaning methods on the surface and temperature of failed titanium implants: an in vitro study.

PubMed

Hakki, Sema S; Tatar, Gulsah; Dundar, Niyazi; Demiralp, Burak

2017-04-01

The aims of this in vitro study are to compare the efficacy of different cleaning methods in removing debris of failed implants and to detect thermal changes of the implants treated by various scaling instruments. Twenty-seven failed implants and two unused implants as control were included to this study-group 1: plastic curette (P), group 2: titanium curette (T), group 3: carbon curette (C), group 4: titanium brush (TB), group 5: Er:YAG laser (laser 1 (L1) 100 mJ/pulse at 10 Hz), group 6: Er:YAG laser (laser 2 (L2) 150 mJ/pulse at 10 Hz), group 7: Er:YAG laser (laser 3 (L3) 200 mJ/pulse at 10 Hz), group 8: ultrasonic scaler appropriate for titanium (US), group 9: air abrasive method (AA) + citric acid, and group 10: implantoplasty (I). The changes on the treated/untreated titanium surfaces and remnant debris were observed by scanning electron microscopy (SEM). Temperature of the implants before and after treatment was detected using a thermocouple. The use of air abrasive and citric acid combination and Er:YAG laser groups was found as the best methods for the decontamination of titanium surfaces of failed implant. When the hand instruments were compared, titanium curette was found better than both the plastic and the carbon curettes which leave plastics and carbon remnants on the titanium surface. The temperature was higher after hand instrumentation when compared to other experimental groups (p < 0.05). Within the limitations of the present in vitro model, it can be concluded that the best method for decontamination of the implant surface is the use of air abrasives and Er:YAG laser.

Simulation of Magnetic Field Assisted Finishing (MFAF) Process Utilizing Smart MR Polishing Tool

NASA Astrophysics Data System (ADS)

Barman, Anwesa; Das, Manas

2017-02-01

Magnetic field assisted finishing process is an advanced finishing process. This process is capable of producing nanometer level surface finish. In this process magnetic field is applied to control the finishing forces using magnetorheological polishing medium. In the current study, permanent magnet is used to provide the required magnetic field in the finishing zone. The working gap between the workpiece and the magnet is filled with MR fluid which is used as the polishing brush to remove surface undulations from the top surface of the workpiece. In this paper, the distribution of magnetic flux density on the workpiece surface and behaviour of MR polishing medium during finishing are analyzed using commercial finite element packages (Ansys Maxwell® and Comsol®). The role of magnetic force in the indentation of abrasive particles on the workpiece surface is studied. A two-dimensional simulation study of the steady, laminar, and incompressible MR fluid flow behaviour during finishing process is carried out. The material removal and surface roughness modelling of the finishing process are also presented. The indentation force by a single active abrasive particle on the workpiece surface is modelled during simulation. The velocity profile of MR fluid with and without application of magnetic field is plotted. It shows non-Newtonian property without application of magnetic field. After that the total material displacement due to one abrasive particle is plotted. The simulated roughness profile is in a good agreement with the experimental results. The conducted study will help in understanding the fluid behavior and the mechanism of finishing during finishing process. Also, the modelling and simulation of the process will help in achieving better finishing performance.

Effect of an essential oil-containing dentifrice on dental plaque microbial composition.

PubMed

Charles, C H; Vincent, J W; Borycheski, L; Amatnieks, Y; Sarina, M; Qaqish, J; Proskin, H M

2000-09-01

To determine the effect of 6 months use of an essential oil-containing (EO) antiplaque/antigingivitis fluoride dentifrice on the balance of the oral microbial flora and on the emergence of resistant microbial forms by analysis of dental plaque and saliva. The dentifrice essential oils consisted of a fixed combination of thymol, menthol, methyl salicylate, and eucalyptol. An identical fluoride-containing dentifrice without the essential oils served as the control. A subgroup of 66 subjects from a clinical trial population of 321 was randomly selected for characterization of their dental plaque microflora. Saliva was also cultured to monitor for the emergence of opportunistic pathogens. Supragingival plaque and saliva were harvested at baseline, after which subjects received a dental prophylaxis. Subjects were sampled again after 3 and 6 months of product use prior to clinical examination. Plaque was characterized for microbial content by phase contrast microscopy for recognizable cellular morphotypes and by cultivation on nonselective and selective culture media. Determination of the minimum inhibitory concentrations of the test agent against selected Actinomyces and Veillonella isolated bacterial species was conducted at all time points to monitor for the potential development of bacterial resistance. There were no statistically significant differences between the microbial flora obtained from subjects using the essential oil-containing dentifrice and the vehicle control for all parameters and time periods except for the percentage of spirochetes at 6 months and for percentage of "other" microorganisms at 3 months. The EO group exhibited a lower adjusted mean for both parameters. Additionally, there was no evidence of the development of bacterial resistance to the antimicrobial activity of the essential oils or the emergence of opportunistic pathogens.

Clinical and microbiologic changes associated with the combined use of a powered toothbrush and a triclosan/copolymer dentifrice: a 3-year prospective study.

PubMed

Bogren, Anna; Teles, Ricardo P; Torresyap, Gay; Haffajee, Anne D; Socransky, Sigmund S; Wennström, Jan L

2007-09-01

Different means are available for self-performed oral hygiene. The aim of this study was to evaluate the clinical and microbiologic effects of a preventive homecare program including the combined use of a powered toothbrush and a triclosan/copolymer-containing dentifrice. A total of 160 adult subjects without signs of destructive periodontal disease were recruited for this 3-year randomized controlled trial. The subjects were assigned to a homecare program using an oscillating/rotating powered toothbrush and a triclosan/copolymer/fluoride-containing dentifrice (test) or a manual toothbrush and a standard fluoride-containing dentifrice (control). Supragingival polishing and reinforcement of homecare procedures were provided every 6 months. Plaque, bleeding on probing (BOP), and probing depth (PD) were scored at baseline and after 1, 2, and 3 years. Subgingival plaque samples were taken from the mesial aspect of each tooth at baseline and after 1, 2, and 3 years and were analyzed for their content of 40 bacterial species using checkerboard DNA-DNA hybridization. All data analyses were based on "intention-to-treat" with the subject as the statistical unit. Compared to baseline, no significant changes in clinical parameters were observed during the 3 years, except for a reduction in the mean PD at the 2- and 3-year follow-up examinations (P <0.05). No significant differences were found between the two groups with regard to plaque, BOP, or PD or in the mean counts of the 40 species at any time point. The study failed to prove additional benefits of the combined use of a powered toothbrush and a triclosan/copolymer-containing dentifrice in adult subjects without signs of destructive periodontal disease.

In vitro study of the effect of a dentifrice containing 8% arginine, calcium carbonate, and sodium monofluorophosphate on acid-softened enamel.

PubMed

Rege, Aarti; Heu, Rod; Stranick, Michael; Sullivan, Richard J

2014-01-01

To investigate the possible mode of action of a dentifrice containing 8% arginine and calcium carbonate (Pro-Argin Technology), and sodium monofluorophosphate in delivering the benefits of preventing acid erosion and rehardening acid-softened enamel. The surfaces of acid-softened bovine enamel specimens were evaluated after application of a dentifrice containing 8% arginine, calcium carbonate, and sodium monofluorophosphate in vitro. Scanning Electron Microscopy (SEM), Electronic Spectrometry for Chemical Analysis (ESCA), and Secondary Ion Mass Spectrometry (SIMS) were used to characterize the enamel surfaces. Exposure of pristine enamel surfaces to citric acid resulted in clear roughening of the surface. Multiple applications of a dentifrice containing 8% arginine, calcium carbonate, and sodium monofluorophosphate to the surface of the enamel resulted in the disappearance of the microscopic voids observed by SEM as a function of treatment applications. The ESCA analysis demonstrated that both the nitrogen and carbonate levels increased as the number of treatments increased, which provides evidence that arginine and calcium carbonate were bound to the surface. Observance of arginine's signature mass fragmentation pattern by SIMS analysis confirmed the identity of arginine on the enamel surface. A series of in vitro experiments has demonstrated a possible mode of action by which a dentifrice containing 8% arginine, calcium carbonate, and sodium monofluorophosphate delivers the benefits of preventing acid erosion and rehardening acid-softened enamel. The combination of arginine and calcium carbonate adheres to the enamel surface and helps to fill the microscopic gaps created by acid, which in turn helps repair the enamel and provides a protective coating against future acid attacks.

Impact of the Daily Use of a Microcrystal Hydroxyapatite Dentifrice on De Novo Plaque Formation and Clinical/Microbiological Parameters of Periodontal Health. A Randomized Trial

PubMed Central

Schlagenhauf, Ulrich; May, Theodor W.; Gravemeier, Martina; Prior, Karola; Petersilka, Gregor; Ehmke, Benjamin

2016-01-01

Aim This 12-week prospective, randomized, double-blind, two-center trial evaluated the impact of a microcrystalline zinc hydroxyapatite (mHA) dentifrice on plaque formation rate (PFR) in chronic periodontitis patients. We hypothesized that mHA precipitates cause delayed plaque development when compared to a fluoridated control (AmF/SnF2), and therefore would improve periodontal health. Material & Methods At baseline and after 4 and 12 weeks, PFR and other clinical and microbiological parameters were recorded. Seventy periodontitis patients received a mHA or AmF/SnF2 dentifrice as daily oral care without hygiene instructions. Four weeks after baseline, participants received full mouth debridement and continued using the dentifrices for another 8 weeks. Results Primary outcome PFR did not change statistically significantly from baseline to weeks 4 and 12, neither in mHA (n = 33; 51.7±17.2% vs. 48.5±16.65% vs. 48.4±19.9%) nor in AmF/SnF2-group (n = 34; 52.3±17.5% vs. 52.5±21.3% vs. 46.1±21.8%). Secondary clinical parameters such as plaque control record, gingival index, bleeding on probing, and pocket probing depth improved, but between-group differences were not statistically significant. Microbiological analyses showed similar slight decreases in colony-forming units in both groups. Conclusion In patients with mild-to-moderate periodontitis, periodontal therapy and use of a mHA-or AmF/SnF2 dentifrice without instructions induced comparable improvements in periodontal health but did not significantly reduce the PFR. Trial Registration ClincalTrials.gov NCT02697539 PMID:27467683

Impact of the Daily Use of a Microcrystal Hydroxyapatite Dentifrice on De Novo Plaque Formation and Clinical/Microbiological Parameters of Periodontal Health. A Randomized Trial.

PubMed

Harks, Inga; Jockel-Schneider, Yvonne; Schlagenhauf, Ulrich; May, Theodor W; Gravemeier, Martina; Prior, Karola; Petersilka, Gregor; Ehmke, Benjamin

2016-01-01

This 12-week prospective, randomized, double-blind, two-center trial evaluated the impact of a microcrystalline zinc hydroxyapatite (mHA) dentifrice on plaque formation rate (PFR) in chronic periodontitis patients. We hypothesized that mHA precipitates cause delayed plaque development when compared to a fluoridated control (AmF/SnF2), and therefore would improve periodontal health. At baseline and after 4 and 12 weeks, PFR and other clinical and microbiological parameters were recorded. Seventy periodontitis patients received a mHA or AmF/SnF2 dentifrice as daily oral care without hygiene instructions. Four weeks after baseline, participants received full mouth debridement and continued using the dentifrices for another 8 weeks. Primary outcome PFR did not change statistically significantly from baseline to weeks 4 and 12, neither in mHA (n = 33; 51.7±17.2% vs. 48.5±16.65% vs. 48.4±19.9%) nor in AmF/SnF2-group (n = 34; 52.3±17.5% vs. 52.5±21.3% vs. 46.1±21.8%). Secondary clinical parameters such as plaque control record, gingival index, bleeding on probing, and pocket probing depth improved, but between-group differences were not statistically significant. Microbiological analyses showed similar slight decreases in colony-forming units in both groups. In patients with mild-to-moderate periodontitis, periodontal therapy and use of a mHA-or AmF/SnF2 dentifrice without instructions induced comparable improvements in periodontal health but did not significantly reduce the PFR. ClincalTrials.gov NCT02697539.

A Randomized Controlled Clinical Trial to Evaluate Extrinsic Stain Removal of a Whitening Dentifrice.

PubMed

Terézhalmy, Géza; He, Tao; Anastasia, Mary Kay; Eusebio, Rachelle

2016-12-01

To evaluate the extrinsic stain removal efficacy of a new whitening dentifrice containing sodium hexametaphosphate (SHMP) over a two-week period. This study used a controlled and randomized, examiner-blind, single-center, two-treatment, parallel group design. Subjects with visible extrinsic dental stain on facial surfaces of their anterior teeth, and meeting all study criteria, were entered into the trial. The test group received the whitening dentifrice with sodium fluoride and SHMP and an ADA reference soft manual toothbrush. Subjects in the control group received a dental prophylaxis after the initial examination at Baseline and were instructed to use their usual oral hygiene products at home. Subjects returned at Day 3 and Week 2 for re-evaluation of extrinsic dental stain. Extrinsic stain was measured using the Interproximal Modified Lobene (IML) Stain Index; safety was assessed based on clinical examination. Fifty subjects (mean age 32.0 years) completed the study, with 25 in each group. Statistically significant reductions in composite stain for whole tooth, as well as interproximal, gingival, and body surfaces were observed for both groups at Day 3 and Week 2 (p < 0.0001) with no significant differences between the two groups (p > 0.3). At Day 3, median percent reductions in composite IML stain from Baseline were 98% for the prophylaxis group and 100% for the test dentifrice group. At Week 2, median percent reductions in composite IML stain were 100% compared to Baseline for both groups. No adverse events were reported for either group. The whitening dentifrice demonstrated a statistically significant reduction in IML stain after three days and two weeks of use relative to baseline. Stain reduction with the toothpaste was comparable to a dental prophylaxis.

Surface roughness of composite resins subjected to hydrochloric acid.

PubMed

Roque, Ana Carolina Cabral; Bohner, Lauren Oliveira Lima; de Godoi, Ana Paula Terossi; Colucci, Vivian; Corona, Silmara Aparecida Milori; Catirse, Alma Blásida Concepción Elizaur Benitez

2015-01-01

The purpose of this study was to determine the influence of hydrochloric acid on surface roughness of composite resins subjected to brushing. Sixty samples measuring 2 mm thick x 6 mm diameter were prepared and used as experimental units. The study presented a 3x2 factorial design, in which the factors were composite resin (n=20), at 3 levels: microhybrid composite (Z100), nanofilled composite (FiltekTM Supreme), nanohybrid composite (Ice), and acid challenge (n=10) at 2 levels: absence and presence. Acid challenge was performed by immersion of specimens in hydrochloric acid (pH 1.2) for 1 min, 4 times per day for 7 days. The specimens not subjected to acid challenge were stored in 15 mL of artificial saliva at 37 oC. Afterwards, all specimens were submitted to abrasive challenge by a brushing cycle performed with a 200 g weight at a speed of 356 rpm, totaling 17.8 cycles. Surface roughness measurements (Ra) were performed and analyzed by ANOVA and Tukey test (p≤0.05). Surface roughness values were higher in the presence (1.07±0.24) as compared with the absence of hydrochloric acid (0.72±0.04). Surface roughness values were higher for microhybrid (1.01±0.27) compared with nanofilled (0.68 ±0.09) and nanohybrid (0.48±0.15) composites when the specimens were not subjects to acid challenge. In the presence of hydrochloric acid, microhybrid (1.26±0.28) and nanofilled (1.18±0,30) composites presents higher surface roughness values compared with nanohybrid (0.77±0.15). The hydrochloric acid affected the surface roughness of composite resin subjected to brushing.

Clinical Effects of Stabilized Stannous Fluoride Dentifrice in Reducing Plaque Microbial Virulence I: Microbiological and Receptor Cell Findings.

PubMed

Klukowska, Malgorzata; Haught, John Christian; Xie, Sancai; Circello, Ben; Tansky, Cheryl S; Khambe, Deepa; Huggins, Tom; White, Donald J

2017-06-01

Lipopolysaccharides (LPSs) and lipoteichoic acids (LTAs), or bacterial endotoxins, bind with Toll-like receptors (TLRs) that are expressed on host cells of the periodontium, thereby contributing to the periodontal pathogenicity of oral bacteria. Stannous fluoride (SnF2), an antibacterial fluoride that treats and controls gingivitis, has been shown to react with lipophilic domains/anionic charges in LPS and LTA. The effects of bacterial species and dental plaque on toll receptors can be studied using genetically engineered cell lines containing linked toll receptors on their surfaces. This randomized, examiner-blinded study examined the clinical effects of stabilized SnF2 dentifrice intervention on gingivitis and dental plaque virulence in populations exhibiting high and low levels of clinical gingivitis. Recruited populations were evaluated for gingival inflammation (MGI) and gingival bleeding (GBI) at baseline and assigned into two cohorts of 20 each, those with high (GBI > 20 sites) and low (GBI < 3 sites) levels of observed bleeding/gingivitis. Participants were sampled at baseline for both supra- and subgingival dental plaque at both healthy (no bleeding, PD = 2 mm), as well as clinically diseased sites (bleeding, PD = 3-4 mm), and then provided with an intervention hygiene product including a stabilized SnF2 dentifrice and a new soft bristle manual toothbrush. Following two and four weeks of assigned dentifrice use, participants returned for a re-evaluation of gingival inflammation and bleeding and repeat samplings of dental plaque. Plaque samples were analyzed by anaerobic culturing of gram negative anaerobes (GNA), as well as by incubation of subgingival sampled plaques with TLR4 transfected HEK293 cells, where gene expression was assessed by measurement of a SEAP alkaline phosphatase reporter as a marker of toll receptor activation. Clinical assessments showed statistically significant reductions in MGI (24-26%) and GBI (42-53%) gingivitis in both diseased and healthy cohorts following four weeks of dentifrice intervention. For all clinical examinations, MGI and bleeding sites were statistically significantly different (lower) in the low bleeding versus the higher bleeding cohort. Supragingival and subgingival GNAs were significantly reduced (p < 0.05) in both high and low disease cohorts at bleeding and healthy sites following four weeks of stabilized SnF2 dentifrice use. TLR activation from subgingival sampled plaque was reduced following four weeks of stabilized SnF2 dentifrice use in both high and low disease cohorts and in both healthy, as well as diseased sites. Collectively, these results support the potential for stabilized SnF2 dentifrice to provide clinical gingivitis benefits via mechanisms beyond control of plaque mass, potentially directly decreasing the pathogenicity of plaque biofilms by blocking reactivity of LPS and LTA ligands with tissue receptors associated with inflammation. Importantly, benefits could be seen in both diseased sites, as well as sites not yet exhibiting symptoms of inflammation, supporting the activity of SnF2 not just in treating diseased sites, but in preventing disease development. These learnings may influence treatment planning for patients susceptible to gingivitis.

Fluorosis and dental caries in Mexican schoolchildren residing in areas with different water fluoride concentrations and receiving fluoridated salt.

PubMed

García-Pérez, A; Irigoyen-Camacho, M E; Borges-Yáñez, A

2013-01-01

To explore the association between fluoride in drinking water and the prevalence and severity of fluorosis and dental caries in children living in communities receiving fluoridated salt. Participants were schoolchildren (n = 457) living in two rural areas of the State of Morelos, Mexico, where the water fluoride concentration was 0.70 or 1.50 ppm. Dental caries status was assessed using Pitts' criteria. Lesions that were classified as D3 (decayed) were identified to determine the decayed, missing, and filled teeth index (D3MFT). Fluorosis was assessed using the Thylstrup-Fejerskov Index (TFI). Information regarding drinking water source and oral hygiene practices (tooth brushing frequency, dentifrice use, and oral hygiene index) was obtained. The prevalence of fluorosis (TFI ≥1) in communities with 0.70 and 1.50 ppm water fluoride was 39.4 and 60.5% (p = 0.014), respectively, while the prevalence of more severe forms (TFI ≥4) was 7.9 and 25.5% (p < 0.001), respectively. The mean D3MFT was 0.49 (±1.01) in the 0.70 ppm community and 0.61 (±1.47) in the 1.50 ppm community (p = 0.349). A logistic regression model for caries (D3 >1) showed that higher fluorosis categories (TFI 5-6 OR = 6.81, p = 0.001) were associated with higher caries experience, adjusted by age, number of teeth present, tooth brushing frequency, bottled water use, and natural water fluoride concentration. The prevalence of fluorosis was associated with the water fluoride concentration. Fluorosis at moderate and severe levels was associated with a higher prevalence of dental caries, compared with lesser degrees of fluorosis. The impact of dental fluorosis should be considered in dental public health programs. Copyright © 2013 S. Karger AG, Basel.

Macleya cordata and Prunella vulgaris in oral hygiene products - their efficacy in the control of gingivitis.

PubMed

Adámková, Hana; Vicar, Jaroslav; Palasová, Jirina; Ulrichová, Jitka; Simánek, Vilím

2004-07-01

A double-blind, placebo-controlled clinical trial was performed to investigate the effectiveness of a herbal-based dentifrice in the control of gingivitis. Forty volunteers completed the 84-day study. All subjects were balanced for parameters measured - plaque index (PI), community periodontal index of treatment needs (CPITN) and papillary bleeding index (PBI). The dentifrice was effective in reducing symptoms of gingivitis as evaluated by the CPITN and PBI indexes.

A flexible nanobrush pad for the chemical mechanical planarization of Cu/ultra-low-к materials

NASA Astrophysics Data System (ADS)

Han, Guiquan; Liu, Yuhong; Lu, Xinchun; Luo, Jianbin

2012-10-01

A new idea of polishing pad called flexible nanobrush pad (FNP) has been proposed for the low down pressure chemical mechanical planarization (CMP) process of Cu/ultra-low-к materials. The FNP was designed with a surface layer of flexible brush-like nanofibers which can `actively' carry nanoscale abrasives in slurry independent of the down pressure. Better planarization performances including high material removal rate, good planarization, good polishing uniformity, and low defectivity are expected in the CMP process under the low down pressure with such kind of pad. The FNP can be made by template-assisted replication or template-based synthesis methods, which will be driven by the development of the preparation technologies for ordered nanostructure arrays. The present work would potentially provide a new solution for the Cu/ultra-low-к CMP process.

Finishing/polishing of composite and compomer restoratives: effectiveness of one-step systems.

PubMed

Yap, Adrian U J; Yap, S H; Teo, C K; Ng, J J

2004-01-01

This study investigated the surface texture of composite (Z100, 3M ESPE) and compomer (F2000, 3M ESPE) restoratives after treatment with different one-step finishing/polishing systems (One-Gloss [OG], Shofu; PoGo [PG], Dentsply; Sof-Lex Brush [SB], 3M ESPE). The surface roughness obtained was compared to that using a matrix strip [MS], a two-step rubber abrasive (CompoSite [CS], Shofu) and a graded abrasive disk (Super Snap [SS], Shofu) system. Eight specimens (3-mm long x 3-mm wide x 2-mm deep) of each material were made according to manufacturer's instructions. With exception of the MS group, all groups were roughened with 320 grit grinding paper using a lapping device prior to finishing/polishing with the different systems. The mean surface roughness (microm) was measured with a profilometer. Data was subjected to ANOVA/Scheffe's tests and independent samples t-test at significance level 0.05. Mean Ra ranged from 0.22 to 0.32 microm for Z100 and 0.45 to 0.68 for F2000. For both materials, the smoothest surfaces were obtained with MS. The roughest surfaces were observed after treatment with SS and OG for Z100 and F2000, respectively. The effectiveness of the finishing/polishing systems was material dependent. The surface finish produced by PG and SB was superior or comparable to that obtained with CS, SS and OG.

The effect of home-use and in-office bleaching treatments combined with experimental desensitizing agents on enamel and dentin

PubMed Central

Pintado-Palomino, Karen; Tirapelli, Camila

2015-01-01

Objective: This study aimed to evaluate in vitro the effect of formulations containing Biosilicate to treat enamel and dentin bovine samples exposed to dental bleaching agents. Materials and Methods: On enamel and dentin bleached with commercial gels containing 16% carbamide peroxide (CP) (14 days/4 h) or 35% hydrogen peroxide (single session/45 min), desensitizing dentifrices (Sensodyne®; experimental dentifrice of Biosilicate®; Odontis RX®; Sorriso®) were applied along 14 days and desensitizing pastes (Biosilicate®/water 1:1; Dessensebilize NanoP®; Bioglass type 45S5/water 1:1) were applied on days 1, 3, 7, 10 and 14. Distilled water was the control. Microhardness (MH) and roughness measurements were the variables measured on the samples before and after the treatments. Student's t-test analyzed differences before and after the treatments. Two-way analysis of variance and post-hoc Tukey test analyzed differences among the factors desensitizing, bleaching agents and substrate. Results: Tukey test showed no differences in roughness for both bleaching treatments and among the desensitizing agents (P > 0.05). Differences in MH appeared on enamel treated with in-home bleaching when control group (lower values) was compared with Sensodyne, Biosilicate dentifrice, Biosilicate paste, and Bioglass paste (higher values). Comparisons between desensitizing agents on dentin treated with both bleaching gels showed no statistical differences. Conclusions: The effect of formulations containing Biosilicate (Biosilicate dentifrice and paste) was significant in the MH of enamel bleached with 16% CP. PMID:25713487

Efficacy of an experimental toothpaste containing 5% calcium sodium phosphosilicate in the relief of dentin hypersensitivity: An 8-week randomized study (Study 2).

PubMed

Sufi, Farzana; Hall, Claire; Mason, Stephen; Shaw, David; Milleman, Jeffery; Milleman, Kimberly

2016-04-01

To compare the efficacy of an experimental toothpaste containing 5% (w/w) calcium sodium phosphosilicate (CSPS) in relieving dentin hypersensitivity (DH) with that of control toothpastes containing no known anti-sensitivity ingredients. This was the second of two exploratory, randomized, four-treatment, examiner-blind, parallel-design, single-site, 8-week studies in healthy subjects with self-reported and clinically diagnosed DH. After an initial lead-in period, subjects were randomized to one of four study treatments: the experimental toothpaste containing 5% CSPS with a modified surfactant system, developed to enhance its organoleptic properties; an abrasivity-matched placebo formulation (0% CSPS) with additional abrasive silica replacing the CSPS; or one of two commercially available fluoride toothpastes as controls. Subjects were instructed to brush twice daily for the next 8 weeks. DH was assessed at baseline and following 4 and 8 weeks of treatment by response to tactile and evaporative (air) stimuli, and using a Dentine Hypersensitivity Experience Questionnaire (DHEQ; a validated quality of life measure for DH). A total of 137 subjects were included in the efficacy analysis. The experimental 5% CSPS toothpaste demonstrated statistically significant reductions from baseline in sensitivity at Week 4 and Week 8 for each clinical measure (all P< 0.01). It also demonstrated significantly greater improvements in DH compared with the two control toothpastes for the majority of clinical measures at Week 4 (P ≤ 0.01) and for all clinical measures at Week 8 (all P < 0.01). The abrasivity-matched 0% CSPS toothpaste was associated with similar outcomes to the 5% CSPS toothpaste. The DHEQ responses did not reveal any consistent statistically significant within-treatment changes from baseline or between-treatment differences. Strong correlations with DHEQ outcomes were only observed for the subjects' sensitivity rating in response to evaporative (air) stimuli at Week 8. Study treatments were well tolerated.

Humectancies of d-tagatose and d-sorbitol.

PubMed

Lu, Y

2001-06-01

Most toothpastes contain either d-sorbitol or glycerin, or both, as humectants. Both compounds are about half as sweet as sucrose. This level of sweetness is not as intense as desired by most people when brushing teeth. Therefore, many brands of toothpaste add saccharin, a high-intensity sweetener, to increase product sweetness to acceptable levels. While this combination provides the required bulk, humectancy and sweetness, the last characteristic suffers from the widely perceived metallic, or bitter, aftertaste of saccharin. d-tagatose, a full-bulk, low-calorie, sucrose-like sweetener with about twice the sweetness of d-sorbitol, and which does not promote tooth decay, holds promise as a sole sweetener for toothpastes. The only untested aspect of this use of d-tagatose was its humectancy, the characteristic that retains the required level of moisture in toothpaste. The current study was made to investigate this important property, to make a direct comparison of the humectancies of d-tagatose and d-sorbitol as pure substances, and to determine whether the humectancy of d-tagatose is sufficient to counter the crystallizing potentiation of the abrasives used in toothpastes. The humectancies of d-tagatose and d-sorbitol were tested through measuring their water activity (a(w)) vs. water content. By comparing their desorption curves, d-tagatose was seen to have a humectancy equal to that of d-sorbitol when a(w) in the d-tagatose solution was above 0.62. d-Tagatose was then tested in toothpastes containing typical abrasives to determine whether the abrasives would induce crystallization of the sweetener. The addition of 20-25% wt/wt of d-tagatose to the Tom of Maine's toothpastes imparted a satisfactory sweetness. It was found that, within that range of concentration, d-tagatose retained its humectancy, and did not crystallize in the popular brands of commercial toothpastes tested. Thus, d-tagatose could be used as a humectant sweetener in toothpastes, although further work on a final toothpaste formula will be necessary to check stability and flavour factors.

A flexible nanobrush pad for the chemical mechanical planarization of Cu/ultra-low-к materials

PubMed Central

2012-01-01

A new idea of polishing pad called flexible nanobrush pad (FNP) has been proposed for the low down pressure chemical mechanical planarization (CMP) process of Cu/ultra-low-к materials. The FNP was designed with a surface layer of flexible brush-like nanofibers which can ‘actively’ carry nanoscale abrasives in slurry independent of the down pressure. Better planarization performances including high material removal rate, good planarization, good polishing uniformity, and low defectivity are expected in the CMP process under the low down pressure with such kind of pad. The FNP can be made by template-assisted replication or template-based synthesis methods, which will be driven by the development of the preparation technologies for ordered nanostructure arrays. The present work would potentially provide a new solution for the Cu/ultra-low-к CMP process. PMID:23110959

All-organic superhydrophobic coatings with mechanochemical robustness and liquid impalement resistance

NASA Astrophysics Data System (ADS)

Peng, Chaoyi; Chen, Zhuyang; Tiwari, Manish K.

2018-03-01

Superhydrophobicity is a remarkable evolutionary adaption manifested by several natural surfaces. Artificial superhydrophobic coatings with good mechanical robustness, substrate adhesion and chemical robustness have been achieved separately. However, a simultaneous demonstration of these features along with resistance to liquid impalement via high-speed drop/jet impact is challenging. Here, we describe all-organic, flexible superhydrophobic nanocomposite coatings that demonstrate strong mechanical robustness under cyclic tape peels and Taber abrasion, sustain exposure to highly corrosive media, namely aqua regia and sodium hydroxide solutions, and can be applied to surfaces through scalable techniques such as spraying and brushing. In addition, the mechanical flexibility of our coatings enables impalement resistance to high-speed drops and turbulent jets at least up to 35 m s-1 and a Weber number of 43,000. With multifaceted robustness and scalability, these coatings should find potential usage in harsh chemical engineering as well as infrastructure, transport vehicles and communication equipment.

Positional asphyxia without active restraint following an assault.

PubMed

Fernando, Tarini; Byard, Roger W

2013-11-01

Deaths due to positional asphyxia are most often accidental, associated with alcohol and/or drug intoxication. A 19-year-old male is reported who was assaulted and placed in a head-down position in the back of a car were he was later found dead. Brush abrasions indicated that he had been dragged to the vehicle. The head and right shoulder were wedged into the foot well with the body uppermost. At autopsy, there was marked congestion of the face, neck, and upper chest with conjunctival ecchymoses, bruising of the face and scalp, focal subarachnoid hemorrhage, minor cerebral contusion, and diffuse cerebral swelling with early hypoxic ischemic encephalopathy (HIE). Toxicology was negative. Death was attributed to HIE resulting from the unusual positioning of the body. Cases of positional asphyxia involving others may not always include restraint, and when encountered should initiate a careful evaluation of the possible events and lethal pathophysiological processes. © 2013 American Academy of Forensic Sciences.

Remineralization effect of CPP-ACP and fluoride for white spot lesions in vitro.

PubMed

Oliveira, Gustavo M S; Ritter, André V; Heymann, Harald O; Swift, Edward; Donovan, Terry; Brock, Guy; Wright, Tim

2014-12-01

This in vitro study compared the remineralization effect on white spot lesions of casein phosphopeptide-amorphous calcium phosphate crème, or CPP-ACP (MI Paste™), 1.1% NaF dentifrice containing 5000ppm of fluoride (ControlRX™), or CPP-ACP crème with 900ppm of fluoride (MI Paste Plus™) with that of a control. Artificial white spot lesions were created on smooth enamel surfaces of sound molars using a previously reported demineralization model. Specimens were randomly assigned to four treatments (n=35) with a pH-cycling model over 30 days: Control (no treatment); MI Paste (10% CPP-ACP crème); F5000 (1.1% NaF dentifrice); or MI Paste Plus (10% CPP-ACP plus 900ppm fluoride crème). Products were applied following manufacturers' directions. Changes in mean lesion depth expressed by percent fluorescence loss (ΔF%), and lesion area (mm(2)) from baseline to after treatment were measured with light-induced fluorescence (QLF). Mean values of each parameter were compared between groups (p<0.05). The remineralization pattern for the F5000 group was unique with marked initial remineralization during the first 10 days and little subsequent change. Based on mean lesion area, the F5000 demonstrated greater remineralization than Control, MI Paste and MI Paste Plus groups. Based on mean fluorescence loss, the F5000 group showed improved remineralization relative to MI Paste Plus, but did not differ statistically from the Control at the end of 30 days. The 1.1% NaF dentifrice demonstrated overall greater remineralization ability than 10% CPP-ACP crème. However, the 1.1% NaF dentifrice was only as effective as the Control to reduce fluorescence loss. This study showed that a 1.1% NaF dentifrice (5000ppm) demonstrated greater remineralization ability than the CPP-ACP topical tooth crème and that the addition of fluoride to its formulation seems to enhance remineralization. Saliva also has the ability to exert an important remineralization effect over time. Copyright © 2014 Elsevier Ltd. All rights reserved.

Remineralization Effect of Topical NovaMin Versus Sodium Fluoride (1.1%) on Caries-Like Lesions in Permanent Teeth

PubMed Central

Vahid Golpayegani, M.; Sohrabi, A.; Biria, M.; Ansari, G.

2012-01-01

Objective: NovaMin, a synthetic mineral composed of calcium, sodium, phosphorous and silica releases deposits of crystalline hydroxyl-carbonate apatite (HCA) structurally similar to tooth mineral composition. The aim of this investigation was to compare the potential remineralization effect of topical NovaMin and Sodium Fluoride gel on caries like lesions in permanent teeth. Materials and Methods: A total of 60 sound human freshly extracted teeth were subjected to a pH-cycling protocol. Specimens were randomly assigned to one of the two treatment groups with NovaMin contained dentifrice applied to group 1, while group 2 received a dentifrice containing 1.1% neutral Sodium Fluoride. Pastes were applied five times after the samples received a demineralization from an earlier cariogenic challenge. Specimens were then evaluated by a Surface Micro Hardness test (SMH, 25G, 5s). Post-treatment SMH measurements were conducted and Mann Whitney test was employed for statistical analysis. Results: Mean post lesion SMH values were 221.99±26.27 and 224.50±28.64 for the first and second groups, respectively. Post treatment SMH values were 232.52±24.34 for NovaMin and 232.03 ±24.46 for the fluoride group. Two way ANOVA test showed a highly significant difference between the two different treatment protocols (p<0.001). Conclusion: NovaMin dentifrice appears to have a greater effect on remineralization of carious-like lesions when compared to that of fluoride containing dentifrice in permanent teeth. PMID:22924104

Clinical evaluation of the Jay Sensitivity Sensor Probe: a new microprocessor-controlled instrument to evaluate dentin hypersensitivity.

PubMed

Sowinski, Joseph A; Kakar, Ashish; Kakar, Kanupriya

2013-05-01

To compare the Jay Sensitivity Sensor Probe (Jay Probe), a new microprocessor-based, pre-calibrated instrument, with well accepted methods used to evaluate sensitivity, i.e. tactile response to the Yeaple Probe, air blast (Schiff scale), and patient responses by Visual Analog Score (VAS). Jay Probe assessments were accomplished using several approaches. With a cohort of 12 subjects, two clinical examiners compared the repeatability of the Jay and Yeaple Probes. A second evaluation of both probes was conducted during two independent parallel design clinical studies each enrolling 100 adults with dentin hypersensitivity (DH). In each study, subjects were evaluated for DH responses after twice daily oral hygiene with a negative control fluoride dentifrice or a positive control dentifrice formulated with ingredients proven to reduce sensitivity, i.e. potassium nitrate or 8.0% arginine with calcium carbonate. Tactile evaluations by the Jay and Yeaple Probes were conducted at baseline and recall visits over the 8-week duration of each study. Also evaluated at each visit were responses to air blast and to patient reported DH assessment by VAS. Low inter-examiner variability with no significant differences between replicate measurements (P > 0.05) was observed with the Jay Probe. Consistent with results from previous studies, subjects assigned dentifrices formulated with potassium nitrate or 8% arginine/calcium carbonate demonstrated improvements in Yeaple, air blast and VAS responses in comparison to those assigned the fluoride dentifrice (P < 0.05). Jay Probe responses correlated significantly with all other sensitivity measures (P < 0.05). Differences between these treatments were observed at all post-treatment evaluations using these methods.

Surface finish of resin-modified and highly viscous glass ionomer cements produced by new one-step systems.

PubMed

Yap, Adrian U J; Ng, J J; Yap, S H; Teo, C K

2004-01-01

This study investigated the surface finish of resin-modified (Fuji II LC, GC) and highly viscous (Fuji IX GP Fast, GC) glass ionomer cements after treatment with three one-step finishing/polishing systems (One-Gloss [OG], Shofu; Pogo [PG], Dentsply; Sof-Lex Brush [SB], 3M-ESPE). The surface roughness obtained was compared to that using a matrix strip [MS], a two-step rubber abrasive (CompoSite [CS], Shofu) and a graded abrasive disk (Super Snap [SS], Shofu) system. Eight specimens (3-mm long x 3-mm wide x 2-mm deep) of each material were made for the various treatment groups. With the exception of the MS group, all groups were roughened with 320 grit grinding paper using a lapping device prior to finishing/polishing with the different systems. The mean surface roughness (microm) was measured with a profilometer. Data was subjected to ANOVA/Scheffe's tests at significance level 0.05. Mean Ra ranged from 0.13 to 1.04 microm for Fuji II LC and 0.14 to 0.81 for Fuji IX GP. For both materials, the smoothest surface was obtained with MS and the roughest with OG. Depending on the materials, the surface finish produced by PG and SB was superior or comparable to that obtained with CS and SS. The effectiveness of one-step systems, when used to finish/polish resin-modified and highly viscous glass ionomer cements, is product dependent.

Erosion Remineralization Efficacy of Gel-to-Foam Fluoride Toothpastes in situ: A Randomized Clinical Trial.

PubMed

Nehme, Marc; Jeffery, Peter; Mason, Stephen; Lippert, Frank; Zero, Domenick T; Hara, Anderson T

2016-01-01

This single-center, randomized, placebo-controlled, four-treatment, four-period crossover study compared the enamel remineralization effects of low- and medium-abrasivity gel-to-foam toothpastes and a reference toothpaste (all 1,450 ppm fluoride as NaF) versus placebo toothpaste (0 ppm fluoride) using a short-term in situ erosion model. Subjects (n = 56) wearing a palatal appliance holding acid-softened bovine enamel specimens brushed their teeth with the test toothpastes. Thereafter, the specimens were removed for analysis of percent surface microhardness recovery (%SMHR) and percent relative erosion resistance (%RER) at 2, 4, and 8 h. Both low- and medium-abrasivity gel-to-foam fluoride toothpastes and the reference toothpaste provided significantly greater %SMHR than placebo at all assessment time points (all p < 0.05). No statistically significant difference of %SMHR was observed between the fluoride treatment groups at any time point. Similarly, all fluoride products provided significantly superior %RER versus placebo (all p < 0.0001), whereas no significant difference of this parameter was noted between the fluoride treatment groups. Increasing numerical improvements of %SMHR and %RER were observed in all four treatment groups over time (2, 4, and 8 h). The present in situ model is a sensitive tool to investigate intrinsic and fluoride-enhanced rehardening of eroded enamel. All three fluoride toothpastes were more efficacious than placebo, and there were no safety concerns following single dosing in this short-term in situ model. © 2016 The Author(s) Published by S. Karger AG, Basel.

Clinical evaluation of seven anticalculus dentifrice formulations.

PubMed

Scruggs, R R; Stewart, P W; Samuels, M S; Stamm, J W

1991-01-01

One hundred ninety-two subjects completed a clinical trial to determine the effects of seven dentifrice formulations on calculus inhibition. The double-blind study involved a ten-day control phase and a ten-day experimental phase. For the control phase, subjects were evaluated for calculus present, received a prophylaxis and had pre-weighed mylar strips attached to the lingual surfaces of the mandibular incisors to harvest mineral deposits. Subjects were then assigned the placebo dentifrice for unsupervised twice-daily use and were required to report once a day for a supervised mouthrinse using a 1:3 dilution of the dentrifice. The experimental phase was identical except that subjects were allocated the experimental dentifices using a stratified random assignment based on age, gender and the initial presence of calculus. Simple linear regression analyses of the dry and ash log weights obtained from the strips were performed. The results showed no statistically significant differences among the test products; however, two formulations containing zinc citrate showed some calculus inhibition-potential suggesting that further research and development of such products may be warranted.

In vitro assessment of 3 dentifrices containing fluoride in preventing demineralization of overdenture abutments and root surfaces.

PubMed

Goettsche, Zachary S; Ettinger, Ronald L; Wefel, James S; Hogan, Mary M; Harless, Jeffery D; Qian, Fang

2014-11-01

Caries development under overdentures has been a continuing problem and requires the daily use of fluoride to prevent demineralization. The purpose of this in vitro study was to compare the effectiveness of dentifrices containing tricalcium phosphate or calcium phosphosilicate in combination with fluoride to prevent the demineralization of overdenture abutments and root surfaces. A total of 56 caries-free extracted teeth were prepared as overdenture abutments. The teeth were painted with acid-resistant varnish, leaving one 1×4-mm window on occlusal and root surfaces. The teeth were randomly divided into 4 groups: a control group treated with distilled/deionized water only, a group treated with ClinPro 5000, a group treated with ReNew, and a group treated with Prevident 5000 gel. Each tooth was subjected to a demineralizing/remineralizing cycling protocol for 12 days with the appropriate treatment products. The teeth were sectioned longitudinally through both windows. Photomicrographs were made of 3 representative sections from each tooth. A representative section was defined as one that included both windows and was cut from the part of the tooth that had the flattest surface to reduce the edge effect. The depths of the lesions were measured on representative sections from each group. A 1-way MANOVA and a 1-way ANOVA with the post hoc Tukey-Kramer test were used to evaluate the treatment effects on the criterion variables (α=.05). The total lesion depths of the control teeth on the occlusal surface were not statistically significantly deeper than for the 3 dentifrices (P=.7705). However, all 3 dentifrices had narrower cavitation depths than the control (mean cavitation band depth, 43.59 [ReNew] versus 37.99 [Prevident 5000 gel] versus 36.70 [ClinPro 5000] versus 246.86 [control]) (P<.001). The mean remineralization band depth for ClinPro 5000 was significantly greater than for the other 2 treatment groups (118.03 [ClinPro 5000] versus 107.80 [ReNew] versus 102.28 [Prevident 5000 gel]) (P<.001). On root surfaces, the total lesion depth for the control group was statistically significantly deeper than for the 3 dentifrices (mean total lesion depth, 150.31 [control] versus 82.05 [ReNew] versus 68.10 [ClinPro 5000] versus 56.97 [Prevident 5000 gel]) (P<.001). The data indicated that teeth treated with Prevident 5000 gel had the shallowest total lesion depth and were statistically significantly different from those treated with ReNew and ClinPro 5000. Moreover, teeth treated with ReNew were found to have the largest remineralization band depth, which was statistically significantly different compared with ClinPro 5000 and Prevident 5000 gel (mean remineralization band depth, 49.66 [ReNew] versus 36.14 [ClinPro 5000] versus 23.27 [Prevident 5000 gel]) (P<.001), but no difference was found in cavitation depth of the root lesions between the 3 dentifrices. The addition of tricalcium phosphate or calcium phosphosilicate to fluoride-containing dentifrices (5000 ppm) does not significantly improve their ability to prevent demineralization of the cut dentin surface of overdenture abutments. However, on root surfaces, ReNew, which contains calcium phosphosilicate, was found to improve remineralization of the lesions compared with Prevident 5000 gel or ClinPro 5000. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

A comparison of terahertz-pulsed imaging with transverse microradiography and microhardness to measure mineral changes in enamel after treatment with fluoride dentifrices

NASA Astrophysics Data System (ADS)

Churchley, David; Lippert, Frank; Lynch, Richard; Alton, Jesse; Gonzalez-Cabezas, C.; Eder, J.

2009-02-01

The aim of this study was to determine the ability of Terahertz Pulsed Imaging (TPI) to measure mineral changes in enamel lesions during de/remineralisation studies. A comparison was made between transverse microradiography (TMR) and microhardness measurements. Artificial lesions were formed in bovine enamel using a solution of 0.1 M lactic acid (pH 5.0) containing 0.2% Carbopol C907 and 50% saturated with hydroxyapatite. The 20 day experimental protocol consisted of four, one-minute treatment periods with dentifrices containing 10, 675, 1385 and 2700ppm fluoride, a 4 h/day acid challenge, and for the remaining time specimens were stored in a 50:50 pooled human / artificial saliva mixture. Terahertz images were generated by positioning the specimens at the focus of the beam and raster scanning the optics to collect the reflections from the air / enamel (AEI) and lesion / enamel (LEI) interface. Significant differences were observed in the intensity change from baseline of the AEI and LEI reflections upon treatment with the four dentifrices. A linear correlation was observed between ΔAEI vs ΔVHN (r2 = 0.997), ΔAEI vs ΔKHN (r2 =0.964), ΔII (ratio of LEI to AEI) vs ΔΔZ (r2 =0.875) and ΔLEI vs ΔΔZ (r2 =0.870). Statistically significant correlations (p<0.05 Pearson correlation coefficient) were also found between the TPI and microhardness / microradiography data. This study has demonstrated that TPI is a useful technology to measure in vitro (and possibly in situ) mineral changes in enamel and is sufficiently sensitive to discriminate between the levels of remineralization produced by the different dentifrices.

A double blind randomised controlled clinical trial comparing a novel anti-stain and calculus reducing dentifrice with a standard fluoride dentifrice.

PubMed

Jowett, Adrian K; Marlow, Ian; Rawlinson, Andrew

2013-04-01

This clinical trial tested the anti-stain efficacy at 3 and 6 months of a novel, sodium polyaspartate-containing, anti-stain dentifrice. In addition, the efficacy of the new dentifrice in controlling gingival inflammation and inhibition of calculus deposition was tested. Participants were recruited to this double blind randomised control clinical trial, and allocated to either test or control groups. The presence of stain and calculus were entry criteria. Measurements of stain, calculus and gingival inflammation were recorded using the Shaw and Murray Stain score, Volpe-Manhold Calculus score and the Modified Gingival Index respectively. Measurements were made at baseline, prior to the removal of stain and calculus, and after 3 and 6 months. Missing data were imputed by and the outcomes were analysed using univariate analysis. At three months, toothpaste containing sodium polyaspartate was better (difference of mean 1.13 with SEM 0.57) than control for the control of dental stain (p<0.05). Stain scores also showed a trend in favour of the test product (difference of mean 1.03 with SEM 0.78) at six months (p>0.05). There was no difference between toothpastes with respect to calculus deposition or gingival inflammation. Toothpaste containing sodium polyaspartate was more effective than a control toothpaste at preventing deposition of dental stain for 3 months after professional tooth cleaning but showed no significant effect at 6 months. Sodium polyaspartate toothpaste was more effective than a control toothpaste at preventing dental stain formation and maybe helpful in controlling staining between episodes of scaling and polishing. Copyright © 2012 Elsevier Ltd. All rights reserved.

Evidence for biofilm acid neutralization by baking soda.

PubMed

Zero, Domenick T

2017-11-01

The generating of acids from the microbial metabolism of dietary sugars and the subsequent decrease in biofilm pH below the pH at which tooth mineral begins to demineralize (critical pH) are the key elements of the dental caries process. Caries preventive strategies that rapidly neutralize biofilm acids can prevent demineralization and favor remineralization and may help prevent the development of sugar-induced dysbiosis that shifts the biofilm toward increased cariogenic potential. Although the neutralizing ability of sodium bicarbonate (baking soda) has been known for many years, its anticaries potential as an additive to fluoride dentifrice has received only limited investigation. There is evidence that baking soda rapidly can reverse the biofilm pH decrease after a sugar challenge; however, the timing of when it is used in relation to a dietary sugar exposure is critical in that the sooner its used the greater the benefit in preventing a sustained biofilm pH decrease and subsequent demineralization. Furthermore, the effectiveness of baking soda in elevating biofilm pH appears to depend on concentration. Thus, the concentration of baking soda in marketed dentifrice products, which ranges from 10% to 65%, may affect their biofilm pH neutralizing performance. People with hyposalivation particularly may benefit from using fluoride dentifrice containing baking soda because of their diminished ability to clear dietary sugars and buffer biofilm acids. Although promising, there is the need for more evidence that strategies that modify the oral ecology, such as baking soda, can alter the cariogenic (acidogenic and aciduric) properties of biofilm microorganisms. The acid neutralization of dental biofilm by using fluoride dentifrice that contains baking soda has potential for helping counteract modern high-sugar diets by rapidly neutralizing biofilm-generated acid, especially in people with hyposalivation. Copyright © 2017 American Dental Association. Published by Elsevier Inc. All rights reserved.

Measurement of dentin hypersensitivity with the Jay Sensitivity Sensor Probe and the Yeaple probe to compare relief from dentin hypersensitivity by dentifrices.

PubMed

Kakar, Ashish; Kakar, Kanupriya

2013-05-01

To compare relief from dentin hypersensitivity (DH) after use of dentifrices formulated with potassium nitrate or fluoride. For the study, DH evaluations were conducted with the Jay Sensitivity Sensor Probe (Jay Probe), a novel tactile hypersensitivity instrument, in conjunction with three other DH methods, i.e. Yeaple probe (tactile), air blast, and the Visual Analog Scale (VAS). Adults (n = 100) who presented two teeth with DH and met study criteria were enrolled for this double-blind, randomized, parallel, controlled clinical trial conducted in an outpatient setting. DH evaluations at baseline were conducted by the tactile, air blast, and VAS methods. Subjects were randomly assigned a dentifrice formulated with 5% potassium nitrate and 1,000 ppm fluoride (as sodium monofluorophosphate) (Colgate Sensitive toothpaste; Test) or a commercially available fluoride dentifrice with 1,000 ppm fluoride as sodium monofluorophosphate (Colgate Cibaca toothpaste; Negative control). Subjects were recalled for DH evaluations after 4 and 8 weeks of product use. 85 subjects completed the entire study with evaluable results. Both treatments resulted in significant reductions in DH from baseline to all recall visits. In comparison to the Negative control, subjects in the Test group demonstrated significantly greater reductions for all DH evaluations at both 4 and 8 weeks (P < 0.05). Average tactile DH scores at week 8 for the Test and Negative control groups were 36.25 and 15.24 with the Yeaple probe and 35 and 12.43 with the Jay probe. Correspondingly, subjects in the Test group demonstrated significantly greater reductions in air blast and VAS responses for DH than those in the Negative control group (P < 0.05).

Clinical and microbiologic effects of commercially available dentifrice containing aloe vera: a randomized controlled clinical trial.

PubMed

Pradeep, A R; Agarwal, Esha; Naik, Savitha B

2012-06-01

Certain plants used in folk medicine serve as a source of therapeutic agents that have antimicrobial and other multipotential effects. This prospective, randomized, placebo, and positively controlled clinical trial was designed to evaluate the clinical and microbiologic effects of a commercially available dentifrice containing aloe vera on the reduction of plaque and gingival inflammation in patients with gingivitis. Ninety patients diagnosed with chronic generalized gingivitis were selected and randomly divided into three groups: group 1, placebo toothpaste; group 2, toothpaste containing aloe vera; and group 3, toothpaste with polymer and fluoride containing triclosan. Clinical evaluation was undertaken using a gingival index, plaque was assessed using a modification of the Quigley-Hein index, and microbiologic counts were assessed at baseline, 6 weeks, 12 weeks, and 24 weeks. A subjective evaluation was also undertaken by questionnaire. Toothpaste containing aloe vera showed significant improvement in gingival and plaque index scores as well as microbiologic counts compared with placebo dentifrice. These improvements were comparable to those achieved with toothpaste containing triclosan. Toothpaste containing aloe vera may be a useful herbal formulation for chemical plaque control agents and improvement in plaque and gingival status.

Apparatus and processes for the mass production of photovoltaic modules

DOEpatents

Barth, Kurt L [Ft. Collins, CO; Enzenroth, Robert A [Fort Collins, CO; Sampath, Walajabad S [Fort Collins, CO

2007-05-22

An apparatus and processes for large scale inline manufacturing of CdTe photovoltaic modules in which all steps, including rapid substrate heating, deposition of CdS, deposition of CdTe, CdCl.sub.2 treatment, and ohmic contact formation, are performed within a single vacuum boundary at modest vacuum pressures. A p+ ohmic contact region is formed by subliming a metal salt onto the CdTe layer. A back electrode is formed by way of a low cost spray process, and module scribing is performed by means of abrasive blasting or mechanical brushing through a mask. The vacuum process apparatus facilitates selective heating of substrates and films, exposure of substrates and films to vapor with minimal vapor leakage, deposition of thin films onto a substrate, and stripping thin films from a substrate. A substrate transport apparatus permits the movement of substrates into and out of vacuum during the thin film deposition processes, while preventing the collection of coatings on the substrate transport apparatus itself.

Apparatus and processes for the mass production of photovotaic modules

DOEpatents

Barth, Kurt L.; Enzenroth, Robert A.; Sampath, Walajabad S.

2002-07-23

An apparatus and processes for large scale inline manufacturing of CdTe photovoltaic modules in which all steps, including rapid substrate heating, deposition of CdS, deposition of CdTe, CdCl.sub.2 treatment, and ohmic contact formation, are performed within a single vacuum boundary at modest vacuum pressures. A p+ ohmic contact region is formed by subliming a metal salt onto the CdTe layer. A back electrode is formed by way of a low cost spray process, and module scribing is performed by means of abrasive blasting or mechanical brushing through a mask. The vacuum process apparatus facilitates selective heating of substrates and films, exposure of substrates and films to vapor with minimal vapor leakage, deposition of thin films onto a substrate, and stripping thin films from a substrate. A substrate transport apparatus permits the movement of substrates into and out of vacuum during the thin film deposition processes, while preventing the collection of coatings on the substrate transport apparatus itself.

Choice of toothpaste for the elderly: an in vitro study.

PubMed

Souza-Rodrigues, Renata Duarte de; Ferreira, Stella da Silva; D'Almeida-Couto, Roberta Souza; Lachowski, Karina Monteleone; Sobral, Maria Ângela Pita; Marques, Márcia Martins

2015-01-01

Hyposalivation and dental root exposure in the elderly are problems that require special oral care. In this context, the characteristics of certain toothpastes are of particular importance. Thus, the aim of this study was to evaluate the cytotoxicity and dentin wear caused by seven different toothpastes. For dentin wear analysis, 40 root dentin specimens were submitted to 20,000 brushing cycles with the different toothpastes and distilled water (control group-CG), using a brushing machine. Dentin surface loss (SL) was measured by contact profilometer. The cytotoxicity of each toothpaste was tested using cultured fibroblasts submitted to a cell-culture-conditioned medium. Fresh medium served as the control. Cell viability was assessed by MTT assay after 24 h of contact with the conditioned media. The data were analyzed statistically by ANOVA, followed by Tukey's test (p < 0.05). The SL of the CG was minimal and significantly lower than that of the Oral B Pro Health (OBPH) group (p < 0.05). All other groups presented SL in between that of the CG and the Oral B Pro Health OBPH group, except for the Sensodyne (SEN) group, which presented SL similar to that of CG (p = 0.05). The SEN group presented a percentage of viable cells similar to that of CG: between 60-89%. All the other toothpastes showed high cytotoxicity, with cell viability less than 50% of the CG. Considering study limitations, we concluded that only one of the seven tested toothpastes exhibited the most desirable toothpaste characteristics for the worldwide growing elderly population (e.g. low cytotoxicity and low-abrasive potential).

Conventional and whitening toothpastes: cytotoxicity, genotoxicity and effect on the enamel surface.

PubMed

Camargo, Samira Esteves Afonso; Jóias, Renata Pilli; Santana-Melo, Gabriela Fátima; Ferreira, Lara Tolentino; El Achkar, Vivian Narana Ribeiro; Rode, Sigmar de Mello

2014-12-01

To evaluate the cytotoxicity and genotoxicity of whitening and common toothpastes, and the surface roughness of tooth enamel submitted to brushing with both toothpastes. Samples of whitening toothpastes [Colgate Whitening (CW) and Oral-B Whitening (OBW)] and regular (non-whitening) toothpastes (Colgate and Oral-B) were extracted in culture medium. Gingival human fibroblasts (FMM-1) were placed in contact with different dilutions of culture media that had been previously exposed to such materials, and the cytotoxicity was evaluated using the MTT assay. The genotoxicity was assessed by the micronucleus formation assay in Chinese hamster fibroblasts (V79). The cell survival rate and micronuclei number were assessed before and after exposure to the toothpaste extracts. For the surface roughness evaluation, 20 bovine tooth specimens, divided into four groups according to toothpastes, were submitted to 10,000 brushing cycles. The results were analyzed using the Mann-Whitney U and two-way ANOVA tests (P < 0.05). MTT assay showed that Colgate was significantly less cytotoxic than CW, Oral-B and OBW at all dilutions (P < 0.01). CW was the most cytotoxic toothpaste (P < 0.01). The whitening toothpastes showed the highest numbers of micronuclei compared to the untreated control (UC) (P < 0.01). Colgate and Oral-B toothpastes were not genotoxic compared to UC (P = 0.326). The OBW toothpaste was statistically significantly abrasive to the enamel surface (P < 0.01). The whitening toothpastes and Oral-B were cytotoxic to the cells. The whitening toothpastes were more genotoxic to cells in vitro than the common toothpastes, and genotoxicity was more pronounced in the OBW toothpaste.

[Anticaries effectiveness of fluoride toothpaste: a meta-analysis].

PubMed

Chaves, Sônia Cristina Lima; Vieira-da-Silva, Lígia Maria

2002-10-01

To carry out a meta-analysis on the effectiveness of fluoride toothpaste for reducing dental caries to calculate the effect size of different hypothesis. MEDLINE and LILACS databases were studied in the period from 1980 to 1998. To evaluate the quality of the studies, methodological rigor criteria proposed by Kay & Locker (1996) were applied after the criteria were submitted to an expert committee of CNPq (National Scientific Council of Brazil) senior researchers. Of 43 papers selected, 22 met the proposed criteria. The effect size of intervention was calculated from differences among the groups and the overall effect of five groups of hypothesis. The high concentration of fluoride in the toothpaste is associated with a larger effect (overall effect = -0.17 CI 95% -0.22/-0.12). The largest caries reductions were observed when comparing fluoride toothpastes and no fluoride toothpastes (overall effect = -0.29 IC 95% -0.34/-0.24). The addiction of antimicrobial agents (overall effect = -0.03 IC 95% -0.07/+0.02), differences in abrasive systems (overall effect = -0.02 IC 95% -0.09/+0.04) and active components do not increase the effectiveness of fluoride toothpastes (overall effect = -0.04 IC 95% -0.10/+0.01). The highest caries reductions were seen in studies where there was supervised tooth brushing. This review reinforced the importance of tooth brushing with fluoride toothpastes for controlling dental caries. However it showed the emphasis put on medical approaches for disease control rather than specific educational actions. The heterogeneity of the results shows the need to consider issues such as the scenario for implementing preventive methods in the evaluation process.

Erosion-protecting effect of oral-care products available on the Swiss market. A pilot study

PubMed

Wasser, Gregor; João-Souza, Samira H; Lussi, Adrian; Carvalho, Thiago S

2018-03-28

The present study sought to test oral-care products available on the Swiss market, such as toothpastes and gels, with respect to the protection of enamel against erosive tooth wear. A total of 56 enamel specimens were divided into 7 groups (n = 8): F-TP = Migros Budget Anti-Caries Toothpaste (Negative Control); F+Sn3500-TP = Elmex Erosion Protection Toothpaste (Positive Control); F-TP + F+Oligopep-Gel = Migros Budget Anti-Caries Toothpaste + Emofluor Protect Gel Professional; F+Sn3120-Gel = Emofluor Gel Intensive Care; F+Oligopep-TP = Candida Protect Professional Toothpaste; F+Sn1260-TP = Emoform-F Protect Toothpaste; and F+Sn3440-TP = Sensodyne Repair & Protect Toothpaste. The specimens were incubated in artificial saliva for 30 min and then brushed in a toothbrushing machine (10 s brushing; total 2 min exposure to the product). After the toothbrush abrasion, the specimens were rinsed, dried and submitted to an erosive challenge (2 min; 1% citric acid; pH 3.6). This sequence was repeated 4 times, and the total enamel surface loss was calculated using indentation measurements before and after the brushing period. All groups presented progressive surface loss throughout the experiment; after 4 cycles, total surface loss values ranged from 0.11 µm (F+Sn3120-Gel) to 0.89 µm (F+Sn1260-TP). Regarding the total surface loss values (median; interquartile range), F-TP (0.54; 0.42–0.59) presented no significant differences compared to any of the other groups. F+Sn3500-TP (0.33; 0.30–0.40), F-TP + F+Oligopep-Gel (0.34; 0.29–0.42) and F+Sn3120-Gel (0.11; 0.09–0.15) presented lower surface loss than F+Oligopep-TP (0.75; 0.59–0.98), F+Sn1260-TP (0.89; 0.68–1.13) and F+Sn3440-TP (0.69; 0.66–0.78). Conclusion: Although some of the oral-care products containing stannous ions or oligopeptide-104 presented numerically lower SL values, they did not present significantly better protection than a regular fluoride toothpaste. The gels showed a general trend of better enamel protection against ETW.

Effect of tetracalcium phosphate/monetite toothpaste on dentin remineralization and tubule occlusion in vitro.

PubMed

Medvecky, L; Stulajterova, R; Giretova, M; Mincik, J; Vojtko, M; Balko, J; Briancin, J

2018-03-01

To investigate the tubule occlusion and remineralization potential of a novel toothpaste with active tetracalcium phosphate/monetite mixtures under de/remineralization cycling. Dentin de/remineralization cycling protocol consisted of demineralization in 1% citric acid at pH 4.6 with following remineralization with toothpastes and soaking in artificial saliva. Effectiveness of toothpastes to promote remineralization was evaluated by measurement of microhardness recovery, analysis of surface roughness, thickness of coating and scanning electron microscopy. The novel tetracalcium phosphate/monetite dentifrice had comparable remineralization potential as commercial calcium silicate/phosphate (SENSODYNE ® ) and magnesium aluminum silicate (Colgate ® ) toothpastes and significantly higher than control saliva (p<0.02). Surface roughness was significantly lower after treatment with prepared and SENSODYNE ® dentifirice (p<0.05). The coatings on dentin surfaces was significantly thicker after applying toothpastes as compared to negative control (p<0.001). The new fluoride toothpaste formulation with bioactive tetracalcium phosphate/monetite calcium phosphate mixture effectively occluded dentin tubules and showed good dentin remineralization potential under de/remineralization cycling. It could replace professional powder preparation based on this mixture. It was demonstrated that prepared dentifrice had comparable properties with commercial fluoride calcium silicate/phosphate or magnesium aluminum silicate dentifrices. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Successes and drawbacks in the caries-preventive use of fluorides--lessons to be learnt from history.

PubMed

Marthaler, T M

2003-01-01

Water fluoridation was the first breakthrough in the practice of preventive cariology on a community level and has remained one of the cornerstones of prevention in dentistry. The concepts regarding the mechanisms of the caries-inhibitory effect, however, have changed in several respects. Today there is general agreement that topical effects on the erupted enamel are most important. The contention that there is no pre-eruptive effect whatsoever has created confusion; there is in fact evidence for a minor pre-eruptive protective effect. Around 1980 many experts believed that fluorides should not be used in high concentrations, for instance above those in dentifrices, because this could block remineralisation in the body of pre-cavity lesions. However, it is now known that such undesirable effects are negligible or non-existent. In the fifties and sixties, fluoride tablets were widely used in Europe and helped to make the concept of caries prevention popular. From 1980 onwards, fluoride dentifrices were found to have a much greater impact and were recognized as being able to lead to a decline of caries prevalence in entire countries, and fluoride tablets gradually lost their importance. Antifluoridationists were unable to delay or hinder the widespread use of fluoride toothpastes but in many cases have successfully opposed public health measures such as fluoridation of water or of salt. The spread of these methods, beneficial for all social strata, might have been more rapid if some of the experts had not propounded the erroneous supposition that fluoride dentifrice will be sufficient for caries prevention. Sale of fluoridated salt has been authorized in several countries on a nationwide scale. However, only Latin American countries have introduced salt fluoridation for entire populations. In Central and Eastern Europe where caries prevalence continues to be high and where the level of usage of topical fluorides including dentifrices will presumably remain at a low level for many years, salt fluoridation would be beneficial.

Dentifrices, mouthwashes, and remineralization/caries arrestment strategies

PubMed Central

Zero, Domenick T

2006-01-01

While our knowledge of the dental caries process and its prevention has greatly advanced over the past fifty years, it is fair to state that the management of this disease at the level of the individual patient remains largely empirical. Recommendations for fluoride use by patients at different levels of caries risk are mainly based on the adage that more is better. There is a general understanding that the fluoride compound, concentration, frequency of use, duration of exposure, and method of delivery can influence fluoride efficacy. Two important factors are (1) the initial interaction of relatively high concentrations of fluoride with the tooth surface and plaque during application and (2) the retention of fluoride in oral fluids after application. Fluoride dentifrices remain the most widely used method of delivering topical fluoride. The efficacy of this approach in preventing dental caries is beyond dispute. However, the vast majority of currently marketed dentifrice products have not been clinically tested and have met only the minimal requirements of the FDA monograph using mainly laboratory testing and animal caries testing. Daily use of fluoride dental rinses as an adjunct to fluoride dentifrice has been shown to be clinically effective as has biweekly use of higher concentration fluoride rinses. The use of remineralizing agents (other than fluoride), directed at reversing or arresting non-cavitated lesions, remains a promising yet largely unproven strategy. High fluoride concentration compounds, e.g., AgF, Ag(NH3)2F, to arrest more advanced carious lesions with and without prior removal of carious tissue are being used in several countries as part of the Atraumatic Restorative Treatment (ART) approach. Most of the recent innovations in oral care products have been directed toward making cosmetic marketing claims. There continues to be a need for innovation and collaboration with other scientific disciplines to fully understand and prevent dental caries. PMID:16934126

Spirit View of 'Wishstone' (False Color)

NASA Technical Reports Server (NTRS)

2005-01-01

[figure removed for brevity, see original site] Figure 1

Scientists working with NASA's Mars Exploration Rover Spirit decided to examine this rock, dubbed 'Wishstone,' based on data from the miniature thermal emission spectrometer. That instrument's data indicated that the mineralogy of the rocks in this area is different from that of rocks encountered either on the plains of Gusev Crater or in bedrock outcrops examined so far in the 'Columbia Hills' inside the crater. Spirit used its rock abrasion tool first to scour a patch of the rock's surface with a wire brush, then to grind away the surface to reveal interior material. Placement of the rover's alpha particle X-ray spectrometer on the exposed circle of interior material revealed that the rock is rich in phosphorus. Spirit used its panoramic camera during the rover's 342nd martian day, or sol, (Dec. 18, 2004) to take the three individual images that were combined to produce this false-color view emphasizing the freshly ground dust around the hole cut by the rock abrasion tool.

Unusually Rich in Phosophorus The graph in figure 1 compares the elemental makeup of a rock dubbed 'Wishstone' with the average composition of rocks that Spirit examined on the western spur of the 'Columbia Hills.' Wishstone lies farther into the hills than that spur. It is richer in phosphorus than any other Mars rock ever examined. Scientists plan to examine other rocks near Wishstone to help explain the significance of the high phosphorus concentration. The vertical scale is the ratio of the concentration of an element in the hills rocks to the concentration of the same element in a typical volcanic rock from the plains that Spirit crossed to reach the hills.

Effect of oxybenzone on PGE2-production in vitro and on plaque and gingivitis in vivo.

PubMed

Jannesson, Lillemor; Birkhed, Dowen; Scherl, Dale; Gaffar, Abdul; Renvert, Stefan

2004-02-01

To study the effect of oxybenzone on prostaglandin E2 (PGE2) production in cell culture and to evaluate the effect of an oxybenzone-containing dentifrice on plaque and gingivitis in a 6-week clinical trial. Human embryo palatal mesenchyme (HEPM) cells were used for testing the inhibition of IL-1beta-stimulated PGE2-production in vitro by different concentrations of oxybenzone. For the in vivo study, a total of 66 individuals with a Quigley & Hein plaque index of at least 1.5 and an Ainamo & Bay gingival index of at least 0.2 were included in a double-blind clinical trial with two cells and a parallel design. Two compositions of fluoride dentifrice were used, one with the addition of 0.5% oxybenzone, and one without. Plaque and gingival index were obtained at three time points: (1) at baseline, (2) after 3 weeks, and (3) after 6 weeks. A dose-dependent inhibition of PGE2-production was found in the HEPM cell culture following oxybenzone exposure. In the clinical trial, a 25% reduction of gingival index was observed in the oxybenzone group (p<0.001) after 6 weeks as compared with 2% for the placebo group. These findings indicate that PGE2-production is reduced by oxybenzone in vitro and that the use of oxybenzone in a dentifrice reduces gingivitis in vivo. Copyright Blackwell Munksgaard, 2004.

Anti-ageing effects of dentifrices containing anti-oxidative, anti-inflammatory, and anti-bacterial agents (Tomarina®) on gingival collagen degradation in rats.

PubMed

Koichiro, Irie; Tomofuji, Takaaki; Ekuni, Daisuke; Endo, Yasumasa; Kasuyama, Kenta; Azuma, Tetsuji; Tamaki, Naofumi; Yoneda, Toshiki; Morita, Manabu

2014-01-01

Previous studies have demonstrated the relationship between ageing and oxidative stress. In this study, we examined the effects of topical application of a dentifrice containing anti-oxidative, anti-inflammatory, and anti-bacterial agents (Tomarina®) to the gingival surface on gingival collagen degradation in rats. Fischer 344 male rats (4 or 8 months old) were divided into two groups: experimental group and control group. Tomarina® (the experimental group) or control dentifrice (the control group) was applied 5 days per week for 2 months. In the control group, gingival collagen density decreased with ageing. In the experimental group, the collagen density did not change with ageing, and was greater than that in the control group at 10 months of age (p < 0.0083). In addition, the control group showed an increase in serum oxidative stress with ageing. The experimental group also showed increased serum oxidative stress, but the value was lower than the control group at 10 months of age (p < 0.0083). Furthermore, low expressions of protein oxidative damage in the periodontal tissue were observed in the experimental group, compared to the control group at 6 months and 10 months. These findings indicate that Tomarina® might suppress the effects of ageing on gingival collagen degradation, by decreasing oxidative stress in the rat model.

Effect of an acid diet allied to sonic toothbrushing on root dentin permeability: an in vitro study.

PubMed

Pinto, Shelon Cristina Souza; Batitucci, Roberta Grasseli; Pinheiro, Michele Carolina; Zandim, Daniela Leal; Spin-Neto, Rubens; Sampaio, José Eduardo Cezar

2010-01-01

This study quantified alterations in root dentin permeability after exposure to different acid beverages. Twenty-five third molars were sectioned below the cementoenamel junction, the root segment was collected, and the pulp tissue was removed. The root segments were connected to a hydraulic pressure apparatus to measure the permeability of root dentin after the following sequential steps, with 5 specimens in each: 1) phosphoric acid etching for 30 s (maximum permeability), 2) root planning to create new smear layer, 3) exposure to different acid substances for 5 min (orange, cola drink, vinegar, white wine, lemon juice), 4) toothbrushing with sonic toothbrush for 3 min, 5) toothbrushing with sonic toothbrush plus dentifrice for 3 min. Considering step I as 100%, the data were converted into percentage and each specimen was its own control. Data were analyzed statistically by Kruskal-Wallis and Dunn's post test at 5% significance level. All acidic substances increased dentin permeability significantly after scraping (p< 0.05). Toothbrushing after exposure to acid substances decreased dentin permeability and the association with dentifrice accentuated the decrease (p< 0.05), except for the specimens treated with cola drink. Thus, it may be concluded that all tested acid fruit juices increased dentin permeability, and toothbrushing with or without dentifrice can decrease root dentin permeability after dentin exposure to acid diet.

Comparison of the incipient lesion enamel fluoride uptake from various prescription and OTC fluoride toothpastes and gels.

PubMed

Schemehorn, B R; DiMarino, J C; Movahed, N

2014-01-01

The objective of this in vitro study was to compare the fluoride uptake into incipient enamel lesions of a novel 970 ppm F- ion SnF2 over-the-counter (OTC) gel (Enamelon Preventive Treatment Gel) and a novel 1150 ppm F- ion OTC toothpaste (Enamelon), each delivering amorphous calcium phosphate (ACP), to the uptake from two different prescription strength, 5000 ppm F- ion dentifrices containing tri-calcium phosphate (TCP) and a prescription 900 ppm F- ion paste containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP). The test procedure followed method #40 in the US-FDA Anticaries Drug Products for OTC Human Use, Final Monograph testing procedures. Eight sets of twelve incisor enamel cores were mounted in Plexiglas rods and the exposed surfaces were polished. The indigenous fluoride levels of each specimen were determined prior to treatment. The treatments were performed using slurries of a negative control (water) and the following products applied to a set of sound enamel cores: 5000 ppm F- ion, sodium fluoride (NaF) prescription (Rx) dentifrice "A" containing TCP; 5000 ppm F- ion, NaF Rx dentifrice "B" containing TCP; 900 ppm F- ion, NaF Rx paste with CPP-ACP; 1150 ppm F- ion, NaF OTC toothpaste; 1150 ppm F- ion, stannous fluoride (SnF2) OTC toothpaste delivering ACP (Enamelon); 1100 ppm F- ion, SnF2 OTC toothpaste; and 970 ppm F- ion, SnF2 OTC gel delivering ACP (Enamelon Preventive Treatment Gel). The twelve specimens of each group were immersed into 25 ml of their assigned slurry with constant stirring (350 rpm) for 30 minutes. Following treatment, one layer of enamel was removed from each specimen and analyzed for fluoride and calcium. The pre-treatment fluoride (indigenous) level of each specimen was subtracted from the post-treatment value to determine the change in enamel fluoride due to the test treatment. The increase in the average fluoride uptake for treated enamel cores was: 10,263 ± 295 ppm for the 970 ppm F- ion, Enamelon Preventive Treatment Gel; 7,016 ± 353 ppm for the 1150 ppm F- ion Enamelon Toothpaste; 4,138 ± 120 ppm for the 5000 ppm F- ion, NaF prescription dentifrice "A" with TCP; 3801 ± 121 ppm for the 5000 ppm F- ion, NaF prescription dentifrice "B" with TCP; 2,647 ± 57 ppm for the 1100 ppm F- ion, SnF2 OTC toothpaste; 1470 ± 40 ppm for the 1150 ppm F- ion, NaF OTC toothpaste; and 316 ± 9 ppm for the 900 ppm F- ion, NaF paste with CPP-ACP. The differences among all the products tested were statistically significant (p < 0.05), except for the two 5000 ppm F- ion products with TCP that were not statistically different from one another, and the 900 ppm F ion, NaF paste with CPP-ACP that was not statistically different from the negative water control. The Enamelon products (970 ppm and 150 ppm F ion, SnF2OTC dentifrices) delivering ACP provide statistically significantly more fluoride to incipient enamel lesions than two prescription strength 5000 ppm F- ion toothpastes containing TCP, the 900 ppm F- ion prescription paste containing CPP-ACP, and the other OTC toothpastes compared in this study.

Update on Early Childhood Caries since the Surgeon General's Report

PubMed Central

Tinanoff, Norman; Reisine, Susan

2009-01-01

The 2000 Surgeon General's Report on Oral Health (SGROH) included a limited discussion of the condition known as Early Childhood Caries (ECC). Because of its high prevalence, its impact on young children's quality of life and potential for increasing their risk of caries in the permanent dentition, ECC is arguably one of the most serious and costly health conditions among young children. A necessary first step in preventing dental caries in preschool children is understanding and evaluating the child's caries risk factors. Previous caries experience and white spot lesions should automatically classify a preschool child as high risk for caries. Microbial factors, such as presence of visible plaque and tests that identify a child as having high levels of mutans streptococci also predict caries in young children. Frequency of sugar consumption, enamel developmental defects, social factors such as socioeconomic status, psychosocial factors, and being an ethnic minority also have shown to be relevant in determining caries risk. Based on this knowledge of specific risk factors for an individual, different preventive strategies as well as different intensities of preventive therapies can be employed. Caries preventive strategies in preschool children include fluoride therapy, such as supervised tooth brushing with fluoridated dentifrice, systemic fluoride supplement to children living in a non-fluoridated area that are at risk for caries, and professional topical fluoride with fluoride varnish. There is emerging evidence that intensive patient counseling or motivational interviews with parents to change specific behaviors may reduce caries prevalence in their children. Findings regarding antimicrobial interventions, efforts to modify diets, and traditional dental health education are less consistent. PMID:19945074

Protective Effect of Adhesive Systems associated with Neodymium-doped Yttrium Aluminum Garnet Laser on Enamel Erosive/Abrasive Wear.

PubMed

Crastechini, Erica; Borges, Alessandra B; Becker, Klaus; Attin, Thomas; Torres, Carlos Rg

2017-10-01

This study evaluated the efficacy of self-etching adhesive systems associated or not associated with the neodymium-doped yttrium aluminum garnet (Nd:YAG) laser on the protection against enamel erosive/abrasive wear. Bovine enamel specimens were demineralized with 0.3% citric acid (5 minutes). The samples were randomly assigned to eight groups (n = 20): SB - Single Bond Universal (3M/ESPE); SB+L - Single Bond Universal + laser (80 mJ/10 Hz); FB - Futurabond U (Voco); FB+L -Futurabond U + laser; GEN - G-aenial bond (GC); GEN+L -G-aenial bond + laser; L - laser irradiation; and C - no treatment. The laser was applied before light curing. The samples were subjected to erosive/abrasive challenges (0.3% citric acid - 2 minutes and tooth brushing four times daily for 5 days). Enamel surface loss was recovered profilometrically by comparison of baseline and final profiles. The adhesive layer thickness, retention percentage of the protective layer, and microhardness of cured adhesive were measured. Data were analyzed using one-way analysis of variance and Tukey's test (5%). There were significant differences for all parameters (p = 0.0001). Mean values ± SD and results of the Tukey's test were: Surface wear: GEN - 4.88 (±1.09)a, L - 5.04 ± 0.99)a, FB - 5.32 (±0.93)ab, GEN + L - 5.46 (±1.27)abc, SB + L - 5.78 (±1.12)abc, FB + L - 6.23 (±1.25)bc, SB - 6.35 (±1.11)c, and C - 6.46 (±0.61)c; layer thickness: GEN - 15.2 (±8.63)c, FB - 5.06 (±1.96)a, GEN + L - 13.96 (±7.07)bc, SB + L - 4.24 (±2.68)a, FB + L - 9.03 (±13.02)abc, and SB - 7.49 (±2.80)ab; retention: GEN - 68.89 (±20.62)c, FB - 54.53 (±24.80)abc, GEN + L - 59.90 (±19.79)abc, SB + L - 63.37 (±19.30)bc, FB + L - 42.23 (±17.68) a, and SB - 47.78 (±18.29)ab; microhardness: GEN - 9.27 (±1.75)c; FB - 6.99 (±0.89)b; GEN + L - 6.22 (±0.87)ab; SB + L - 15.48 (±2.51)d; FB + L - 10.67 (±1.58)c; SB - 5.00 (±1.60)a. The application of Futurabond U and G-aenial bond on enamel surface, as well as the Nd:YAG laser irradiation alone, was able to reduce the enamel wear. The use of laser after the adhesive systems did not improve their efficacy. Erosive/abrasive wear is a prevalent condition in clinical practice affecting many patients. The association of adhesive systems and Nd:YAG laser is of considerable clinical interest because it assesses new treatments to reduce the erosive/abrasive wear that would help dentists in clinical treatment decisions to reduce enamel wear and achieve a successful treatment.

Efficacy of an experimental toothpaste containing 5% calcium sodium phosphosilicate in the relief of dentin hypersensitivity: An 8-week randomized study (Study 1).

PubMed

Sufi, Farzana; Hall, Claire; Mason, Stephen; Shaw, David; Kennedy, Liam; Gallob, John T

2016-04-01

To evaluate the efficacy of an experimental toothpaste containing 5% (w/w) calcium sodium phosphosilicate (CSPS) in relieving dentin hypersensitivity (DH) compared with control toothpastes containing no known anti-sensitivity ingredients. This was the first of two exploratory, randomized, four-treatment, examiner-blind, parallel-design, single-site, 8-week studies in healthy subjects with self-reported and clinically diagnosed DH. The experimental toothpaste contained 5% CSPS with a modified surfactant system, developed to enhance its organoleptic properties. Efficacy was evaluated against an abrasivity-matched placebo formulation (0% CSPS) with additional abrasive silica replacing the CSPS, and two commercially available fluoride toothpastes as controls. After an initial lead-in period, subjects were randomized to one of the four study treatments and instructed to brush twice daily for the next 8 weeks. DH was assessed at baseline and following 4 and 8 weeks of treatment by response to tactile and evaporative (air) stimuli, and using a Dentine Hypersensitivity Experience Questionnaire (DHEQ; a validated quality-of-life measure for DH). A total of 134 subjects were randomized and completed the study. All treatments demonstrated statistically significant reductions in sensitivity from baseline at Week 4 and Week 8 for each clinical measure of sensitivity (all P ≤ 0.001). The 0% CSPS toothpaste demonstrated small but statistically significant reductions in Schiff sensitivity score compared with the other study toothpastes at Week 8 (all P< 0.05), whereas the experimental 5% CSPS toothpaste significantly improved the tactile threshold at Week 4 compared with the 0% CSPS toothpaste (P = 0.0467). The DHEQ responses did not reveal any consistent statistically significant within-treatment changes from baseline or between-treatment differences. Correlation analysis showed weak-to-moderate associations between the DHEQ outcomes and clinical endpoints. Study treatments were well tolerated. The treatment differences observed in this exploratory study were small and inconsistent between measures. The reasons for the inconsistencies are not clear but may be related to the properties of the abrasivity-matched 0% CSPS formulation, with the increased level of dental silica conferring an advantage in terms of reducing DH. The ability of dental silicas to occlude exposed dentin tubules and thereby reduce DH has been demonstrated in previous studies, and may warrant further clinical investigation.

Kinetics of monofluorophosphate hydrolysis in a bacterial test plaque in situ.

PubMed

Tenuta, L M A; Del Bel Cury, A A; Tabchoury, C P M; Moi, G P; Silva, W J; Cury, J A

2010-01-01

Models to evaluate the anticaries potential of fluoride (F) formulations containing monofluorophosphate (MFP) should consider the release of F ion to the oral environment by its enzymatic hydrolysis. This was tested in situ, using a test plaque of a strain of Streptococcus mutans which presents high MFPase activity at pH 5.0. The test plaque was exposed to non-F or MFP (1,450 microg F/g) dentifrices and the fluid phase of the plaque was analyzed after 15, 30, 45 and 75 min. MFP concentration in the plaque fluid decreased over time after exposure to MFP dentifrice, but F ion reached 134.9 +/- 32.0 microM at 15 min and decreased significantly only at 75 min, suggesting continuous MFP hydrolysis by the test plaque. Copyright 2010 S. Karger AG, Basel.

Comparative Evaluation of Effect of Nano-hydroxyapatite and 8% Arginine Containing Toothpastes in Managing Dentin Hypersensitivity: Double Blind Randomized Clinical Trial.

PubMed

Anand, Suresh; Rejula, Fathima; Sam, Joseph V G; Christaline, Ramakrishnan; Nair, Mali G; Dinakaran, Shiji

This double blind randomized clinical trial was conducted with the purpose of evaluating the effects of Nano-hydroxyapatite toothpaste as compared to 8% Arginine containing toothpaste in the management of Dentin hypersensitivity (DH). Patients (30 in each group) suffering from DH and eliciting a VAS score higher than 2 in air blast and tactile test were randomly allocated (block randomization) into either a group 1 (arginine toothpaste) or group 2 (nHA toothpaste). The primary outcome evaluated was the reduction of DH as measured by the electrical stimulus reading on the digital pulp tester. Current required for eliciting a VAS score of 2 was recorded before application of dentifrice. 1 cm of toothpaste was then expressed on the tooth surface for two minutes in each group and rinsed off. The electrical stimulus required to elicit a VAS score of 2 was recorded after 5 minutes, 1 week and 4 weeks. The desensitizing paste containing arginine provided a statistically significant reduction in DH and so did the paste containing nHA. Mean increase in amperage value (reduction in DH) was higher for nHA based than the arginine containing dentifrice. This difference was not statistically significant showing that both toothpastes are equally effective. The findings of the present study encourage the use of Nano-hydroxyapatite and arginine containing dentifrice as an effective desensitizing agent providing relief from symptoms 5 minutes after application and after 1 and 4 weeks.

Explicit Solvent Simulations of Friction between Brush Layers of Charged and Neutral Bottle-Brush Macromolecules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carrillo, Jan-Michael; Brown, W Michael; Dobrynin, Andrey

2012-01-01

We study friction between charged and neutral brush layers of bottle-brush macromolecules using molecular dynamics simulations. In our simulations the solvent molecules were treated explicitly. The deformation of the bottle-brush macromolecules under the shear were studied as a function of the substrate separation and shear stress. For charged bottle-brush layers we study effect of the added salt on the brush lubricating properties to elucidate factors responsible for energy dissipation in charged and neutral brush systems. Our simulations have shown that for both charged and neutral brush systems the main deformation mode of the bottle-brush macromolecule is associated with the backbonemore » deformation. This deformation mode manifests itself in the backbone deformation ratio, , and shear viscosity, , to be universal functions of the Weissenberg number W. The value of the friction coefficient, , and viscosity, , are larger for the charged bottle-brush coatings in comparison with those for neutral brushes at the same separation distance, D, between substrates. The additional energy dissipation generated by brush sliding in charged bottle-brush systems is due to electrostatic coupling between bottle-brush and counterion motion. This coupling weakens as salt concentration, cs, increases resulting in values of the viscosity, , and friction coefficient, , approaching corresponding values obtained for neutral brush systems.« less

Abrasive rolling effects on material removal and surface finish in chemical mechanical polishing analyzed by molecular dynamics simulation

NASA Astrophysics Data System (ADS)

Si, Lina; Guo, Dan; Luo, Jianbin; Lu, Xinchun; Xie, Guoxin

2011-04-01

In an abrasive chemical mechanical polishing (CMP) process, materials were considered to be removed by abrasive sliding and rolling. Abrasive sliding has been investigated by many molecular dynamics (MD) studies; while abrasive rolling was usually considered to be negligible and therefore was rarely investigated. In this paper, an MD simulation was used to study the effects of abrasive rolling on material removal and surface finish in the CMP process. As the silica particle rolled across the silicon substrate, some atoms of the substrate were dragged out from their original positions and adhered to the silica particle, leaving some atomic vacancies on the substrate surface. Meanwhile, a high quality surface could be obtained. During the abrasive rolling process, the influencing factors of material removal, e.g., external down force and driving force, were also discussed. Finally, MD simulations were carried out to examine the effects of abrasive sliding on material removal under the same external down force as abrasive rolling. The results showed that the ability of abrasive rolling to remove material on the atomic scale was not notably inferior to that of abrasive sliding. Therefore, it can be proposed that both abrasive sliding and rolling play important roles in material removal in the abrasive CMP of the silicon substrate.

Study on design of light-weight super-abrasive wheel

NASA Astrophysics Data System (ADS)

Nohara, K.; Yanagihara, K.; Ogawa, M.

2018-01-01

Fixed-abrasive tool, also called a grinding wheel, is produced by furnacing abrasive compound which contains abrasive grains and binding powder such as vitrified materials or resins. Fixed-abrasive tool is installed on spindle of grinding machine. And it is given 1,800-2,000 min-1 of spindle rotation for the usage. The centrifugal fracture of the compound of fixed- abrasive tool is one of the careful respects in designing. In recent years, however, super-abrasive wheel as a fixed-abrasive tool has been developed and applied widely. One of the most characteristic respects is that metal is applied for the body of grinding-wheel. The strength to hold abrasive grain and the rigidity of wheel become stronger than those of general grinding wheel, also the lifespan of fixed-abrasive tool becomes longer. The weight of fixed-abrasive tool, however, becomes heavier. Therefore, when the super-abrasive wheel is used, the power consumption of spindle motor becomes larger. It also becomes difficult for the grinding-wheel to respond to sudden acceleration or deceleration. Thus, in order to reduce power consumption in grinding and to obtain quicker frequency response of super-abrasive wheel, the new wheel design is proposed. The design accomplishes 46% weight reduction. Acceleration that is one second quicker than that of conventional grinding wheel is obtained.

Effect of Frequency of Brushing Teeth on Plaque and Calculus Accumulation, and Gingivitis in Dogs.

PubMed

Harvey, Colin; Serfilippi, Laurie; Barnvos, Donald

2015-01-01

The efficacy of brushing the teeth of beagle dogs in a randomized, controlled, blinded study design using a clearly-defined brushing technique was evaluated for 4 brushing frequencies: brushing daily, brushing every other day, brushing weekly and brushing every other week, compared with no brushing in a control group of dogs. All dogs were fed a standard dry kibble diet during the study. Standard plaque, calculus, and gingivitis indices were used to score the teeth. A 'clean tooth' model was used. No gingival or non-gingival lacerations or other signs of injury to oral tissues were found at the end of the 28 day trial period. Brushing more frequently had greater effectiveness in retarding accumulation of plaque and calculus, and reducing the severity of pre-existing gingivitis. Brushing daily or every other day produced statistically significant improved results compared with brushing weekly or every other week. Based on the results of this study, daily brushing is recommended.

A blind caries and fluorosis prevalence study of school-children in naturally fluoridated and nonfluoridated townships of Morayshire, Scotland.

PubMed

Stephen, Kenneth W; Macpherson, Lorna M D; Gilmour, W Harper; Stuart, Russell A M; Merrett, Martyn C W

2002-02-01

To undertake a blind caries and fluorosis prevalence study of Grade 1 (aged 5/6 yr) and Grade 4-7 (aged 8-12 yr) children from naturally water-fluoridated (1 ppm, since 1985) Burghead, Findhorn & Kinloss (F), and nearby nonfluoridated Buckie & Portessie (N-F), in rural Morayshire, Scotland. A blind clinical (+ 10% repeats) caries study of the above townships' 5/6-yr-old lifetime (15 F; 43 N-F), and 8-12-yr-old lifetime (55 F; 136 N-F)/school-lifetime (31 F; 37 N-F) residents was undertaken following bussing of these children to a common examination site in close-by Elgin Town Hall. Initially, each child was asked about their own perception of the aesthetics of their maxillary front teeth. Fluorosis was assessed clinically using the TF Index, as well as photographically - for later blind scoring (+ 10% repeats for lifetime 8-12-yr-olds) of slides by four dental and two lay 'jurors', alongside a now-established UK 'bench-mark' mildly mottled (TFI = 2), fluorosis comparator slide, judged in previous studies to be aesthetically lay-acceptable. In addition, by parental questionnaire, information was sought concerning their child's fluoride supplement and dentifrice usage histories. For 5/6-yr-olds, mean primary caries scores were 96.0% less in fluoridated than nonfluoridated subjects (P < 0.01). In 8-12-yr-olds, DMFT values favoured water-fluoridated subjects; their caries-free trend was significant (P < 0.001 overall). Clinically, 33% of all lifetime F subjects and 18% of all N-F pupils had fluorosed maxillary anterior teeth (P = 0.045), but no statistically significant difference was found between the 7% F and 3% N-F subjects with TFI scores > 2 (P = 0.25). Photographically, 'jury' mottling assessment (+ 10% repeats) of projected slides resulted in at least 1 : 6 positive scores in 43.6% of F and 30.9% of N-F pupils, albeit they unanimously scored only nine F and five N-F children as having fluorosed teeth (P < 0.01). In no case did all members score TFI > 2. Dental and lay scorers rated TFI = (1/2) in only a further 9.1% and 5.5% of F subjects, respectively, compared to 0.7% and 1.5% respectively of N-F pupils. Again, TFI > 2 was scored unanimously in no child. No differences were found regarding the children's own degree of anterior tooth aesthetic nonacceptability between F (11%) and N-F (12%) prevalence (P = 0.75). Finally, only one F child had taken F supplements and, while 26 N-F had used F drops, no significant relationship was found between their usage and TFI values in the latter group (P = 0.49). Additionally, no relationship was noted between clinical TFI scores and the age at which parents stated fluoridated dentifrice toothbrushing commenced, between 0 and 24 + months of age. Considerable caries benefit has accrued to those Morayshire rural children who have received naturally fluoridated water (at 1 ppm) throughout their lives, as compared to their socioeconomically similar, nonfluoridated rural counterparts. Furthermore, in spite of all but two subjects claiming to have brushed regularly with fluoridated dentifrice (and no evidence of the availability of nonfluoridated toothpaste being purchasable in the five townships), only borderline mild fluorosis disadvantages have been noted clinically, and none by the subjects' own aesthetic perceptions. Finally, no evidence was found to suggest any delay in permanent tooth eruption patterns of the F subjects. It would seem appropriate therefore, that adjustment of Scots' drinking waters' natural fluoride levels to 1 ppm should be pursued to extend similar dental advantages to the vast majority of that population (both young and old) which, it is well documented, has the worst dental health of mainland UK.

Dependence of Non-Prestonian Behavior of Ceria Slurry with Anionic Surfactant on Abrasive Concentration and Size in Shallow Trench Isolation Chemical Mechanical Polishing

NASA Astrophysics Data System (ADS)

Kang, Hyun‑Goo; Kim, Dae‑Hyeong; Katoh, Takeo; Kim, Sung‑Jun; Paik, Ungyu; Park, Jea‑Gun

2006-05-01

The dependencies of the non-Prestonian behavior of ceria slurry with anionic surfactant on the size and concentration of abrasive particles were investigated by performing chemical mechanical polishing (CMP) experiments using blanket wafers. We found that not only the abrasive size but also the abrasive concentration with surfactant addition influences the non-Prestonian behavior. Such behavior is clearly exhibited with small abrasive sizes and a higher concentrations of abrasives with surfactant addition, because the abrasive particles can locally contact the film surface more effectively with applied pressure. We introduce a factor to quantify these relations with the non-Prestonian behavior of a slurry. For ceria slurry, this non-Prestonian factor, βNP, was determined to be almost independent of the abrasive concentration for a larger size and a smaller weight conentration of abrasive particles, but it increased with the surfactant concentration for a smaller size and a higher concentration of abrasives with surfactant addition.

The Environmental Assessment and Management (TEAM) Guide: North Carolina Supplement

DTIC Science & Technology

2010-03-01

for Federal Regulations incorporated by reference. Definitions • Abrasive - any material used in abrasive blasting operations (15A NCAC 2D.0541...Added March 2001]. • Abrasive Blasting - the operation of cleaning or preparing a surface by forcibly propelling a stream of abrasive material against...the surface. Sandblasting is one form of abrasive blasting (15A NCAC 2D.0541) [Added March 2001]. • Abrasive Blasting Equipment - any equipment

Micro-abrasion-corrosion behaviour of a biomedical Ti-25Nb-3Mo-3Zr-2Sn alloy in simulated physiological fluid.

PubMed

Wang, Zhenguo; Li, Yan; Huang, Weijiu; Chen, Xiaoli; He, Haoran

2016-10-01

The micro-abrasion-corrosion behaviour of the biomedical Ti-25Nb-3Mo-3Zr-2Sn alloy in Hank׳s solution with protein has been investigated using electrochemical measurements, tribological tests and scanning electron microscope (SEM) observations. The potentiodynamic polarization tests showed that the corrosion potential (Ecorr) exhibits the maximum value at the abrasive concentration of 0.05gcm(-3) despite of the load level. The tribological results indicated that the total material loss of the Ti-25Nb-3Mo-3Zr-2Sn alloy during micro-abrasion increased with the increasing abrasive concentration at a certain applied load. When the abrasive concentration is no more than 0.15gcm(-3), the total material loss increases with increasing load, while the total material loss exhibits the maximum value at a moderate load in case of higher abrasive concentration levels. This was ascribed to the three-body or two-body micro-abrasion-corrosion at different abrasive concentration levels. The wastage map, abrasion mode map and synergy map associated with the applied load and the abrasive concentration were constructed to evaluate the micro-abrasion-corrosion behaviour of the Ti-25Nb-3Mo-3Zr-2Sn alloy in potential biomedical applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Brush head composition, wear profile, and cleaning efficacy: an assessment of three electric brush heads using in vitro methods.

PubMed

Kaiser, Eva; Meyners, Michael; Markgraf, Dirk; Stoerkel, Ulrich; von Koppenfels, Roxana; Adam, Ralf; Soukup, Martin; Wehrbein, Heinrich; Erbe, Christina

2014-01-01

The objective of this research was to evaluate a current store brand (SB) brush head for composition/physical characteristics, Wear Index (WI), and cleaning efficacy versus the previous SB brush head refill design (SB control) and the Oral-B Precision Clean brush head (positive control, PC). This research consisted of three parts: 1) Analytical analysis using Fourier Transform Infrared (FT-IR) spectrometry to evaluate the chemical composition of the current SB brush head bristles relative to the SB control. In addition, physical parameters such as bristle count and diameter were determined. 2) Wear Index (WI) investigation to determine the Wear Index scores of in vitro-aged brush heads at four weeks (one month) and 13 weeks (three months) by a trained investigator. To "age" the brush heads, a robot system was used as a new alternative in vitro method to simulate aging by consumer use. 3) Robot testing to determine the cleaning performance of in vitro-aged brush heads, comparing one month-aged current SB brush heads with the SB control (one and three months-aged) and the PC brush heads (three months-aged) in a standardized fashion. 1) FT-IR analysis revealed that the chemical composition of the current and control SB refill brush heads is identical. In terms of physical parameters, the current SB brush head has 12% more bristles and a slightly oval brush head compared to the round brush head of the SB control. 2) Wear Index analysis showed there was no difference in the one month-aged current SB brush head versus the one month-aged SB control (1.67 vs. 1.50, p = 0.65) or versus the three months-aged PC brush head (1.67 vs. 1.50, p = 0.65). The one month-aged current SB brush head demonstrated statistically significantly less wear than the three months-aged SB control (1.67 vs. 2.67, p = 0.01). 3) Analysis of cleaning efficacy shows that the one month-aged current SB brush head had improved cleaning performance over the one month-aged SB control brush head (p < 0.05), despite no statistically significant difference in wear. Both the one month-aged current and control SB brush heads showed statistically significantly lower cleaning performance compared to the three months-aged PC brush heads (p < 0.01). While the current SB brush head showed improved cleaning over the SB control, it demonstrated significantly lower durability and cleaning in comparison to the PC brush head. Dental professionals should be aware of these differences, both in durability and in cleaning performance, when recommending brush heads to their patients.

Virtual reality using guided imagery to create Kanji or Hiragana by computer graphics: I

NASA Astrophysics Data System (ADS)

Ishigame, Masaaki; Miura, Nozomu; Hosaka, Akiko

1997-04-01

We have been studying a kind of word-processor that is able to create Japanese characters, Kanji or Hiragana strings in the cursive style, using an electronic writing brush model. Int his paper, we describe in detail the operation characteristics of the electronic writing brush which we have proposed. We defined a touch shape pattern of the electronic writing brush as a form which is projected as a circle and a cone. The brush goes on certain points of the skeleton of the character figure which is given as skeleton data. The thickness of the line is determined by a diametric variable brush pressure. Our progressive action model can rotate the direction of the writing brush tip corresponding to the difference angle between the direction of brush tip and the direction of the brush movement, and also the softness of the writing brush to express the writing brush method called the side writing brush. The front side and back side of the writing brush can be expressed in a calligraphic drawing. With our technique we can draw characters in actual stroke order on a virtual computer plane as if they are written by an actual writing brush.

Tooth brushing habits in uninstructed adults--frequency, technique, duration and force.

PubMed

Ganss, C; Schlueter, N; Preiss, S; Klimek, J

2009-06-01

Professional recommendations for individual oral hygiene mostly include tooth brushing at least twice daily for 2-3 min with gentle force using the Bass technique or modifications of it. This study evaluated whether habitual tooth brushing actually meets these standards. Uninstructed adults (n = 103; mean age 31 +/- 6 years; 61 female, 42 male) with habitual manual tooth brushing were given a self-administered questionnaire about the frequency of brushing and a computer system recorded their brushing technique, duration and force. The majority (79.6%) of participants brushed twice daily. The mean brushing duration was 96.6 +/- 36.0 s, the mean brushing force was 2.3 +/- 0.7 N (max. 4.1 N), and no significant differences were found for quadrants. Most subjects (73.8%) brushed with circling, 8.7% with horizontal/scrubbing, 13.6% with horizontal/circling and 3.9% with vertical/sweeping movements. Modified Bass technique was not observed. When appropriate brushing habits were defined as brushing at least twice daily for 120 s with a brushing force of less than 3 N and with circling or vertical sweeping movements, only 25.2% of the participants fulfilled all criteria, emphasising the ongoing need for oral hygiene education.

Increasing operational life of brush-contact device in the turbine generator due to using lubricating molybdenum disulphide brushes

NASA Astrophysics Data System (ADS)

Izotov, A. I.; Fominykh, A. A.; Nikulin, S. V.; Prokoshev, D. K.; Legoti, A. B.; Timina, N. V.

2018-01-01

A way of reducing irregular current distribution in multi-brush systems of sliding current transfer with its wear reduction due to installing lubricating molybdenum disulphide brushes on slip rings to ensure a greasing nano-sized cover on the slip ring surface is proposed. The authors give the results of industrial tests estimated on the performance effectiveness of lubricating brushes on slip rings of the TBB-320-2UZ-type turbine generator. The results showed that the lubricating brushes reduce a) the wear of 6110 OM+M and EG2AF+M brushes by 1.2 and 2.1 times respectively, b) current distribution irregularity in parallel operating brushes due to stabilizing the contact arc, and c) the temperature of the electrical brush-contact device due to the friction reduction in brushes.

Prevalence of early childhood caries and associated risk factors in preschool children of urban Bangalore, India: A cross-sectional study

PubMed Central

Prakash, Prashanth; Subramaniam, Priya; Durgesh, B.H.; Konde, Sapna

2012-01-01

Objectives: Early childhood caries (ECC) is a devastating form of dental decay with multi-factorial origin. The aim of this cross-sectional study is to investigate the prevalence and related risk factors of ECC in preschool children of urban Bangalore (India). Methods: A random sample of 1,500 children aged between 8 and 48 months were selected from various parts of urban Bangalore. The status of dental caries was recorded according to the World Health Organization (WHO) criteria. Information regarding oral hygiene practices, feeding habits, socio-economic status, birth weight, and educational status of the mother was obtained through a structured questionnaire given to mothers of preschool children. The data was subjected to statistical analysis using the Statistical package for social sciences (SPSS) version 12. Results: The prevalence of ECC in preschool children was 27.5%, while the mean deft was 0.854. ECC increased significantly with age. Children whose mothers had no schooling and those who belonged to low socioeconomic group showed higher caries prevalence. A significant increase in caries prevalence was found in children accustomed to the practice of on-demand breast feeding and bottle feeding at night. Caries also increased significantly when snacks were consumed between meals. However, increased frequency of tooth-brushing, parental supervision, use of a baby toothbrush, and fluoridated dentifrice significantly decreased caries prevalence. Conclusion: ECC is a serious public health problem in this population and measures to increase awareness should be undertaken. The target candidates for oral health promotion programs should include mothers, general dentists, pediatricians, nurses, primary care health workers, care-takers at day-care centers and gynecologists. PMID:22509116

Ordered quasi-two-dimensional structure of nanoparticles in semiflexible ring polymer brushes under compression

NASA Astrophysics Data System (ADS)

Hua, Yunfeng; Deng, Zhenyu; Jiang, Yangwei; Zhang, Linxi

2017-06-01

Molecular dynamics simulations of a coarse-grained bead-spring model of ring polymer brushes under compression are presented. Flexible polymer brushes are always disordered during compression, whereas semiflexible polymer brushes tend to be ordered under sufficiently strong compression. Further, the polymer monomer density of the semiflexible polymer brush is very high near the brush surface, inducing a peak value of the free energy near the surface. Therefore, when nanoparticles are compressed in semiflexible ring polymer brushes, they tend to exhibit a closely packed single-layer structure between the brush surface and the impenetrable wall, and a quasi-two-dimensional ordered structure near the brush surface is formed under strong compression. These findings provide a new approach to designing responsive applications.

The effect of microstructure on abrasive wear of steel

NASA Astrophysics Data System (ADS)

Kešner, A.; Chotëborský, R.; Linda, M.

2017-09-01

Abrasive wear of agricultural tools is one of the biggest problems in currently being. The amount of abrasive wear, depending on the microstructure, has been investigated in this work. Steels 25CrMo4 and 51CrV4 were used in this work to determine the effect of the microstructure on the abrasive wear. These steels are commonly used for components that have to withstand abrasive wear.SEM analysis was used to detect the microstructure. The standardized ASTM G65 method was used to compare the abrasive wear of steels. The results show that the abrasive wear depends on the microstructure of steels.

Structure of Weakly Charged Polyelectrolyte Brushes: Monomer Density Profiles

NASA Astrophysics Data System (ADS)

Borisov, O. V.; Zhulina, E. B.

1997-03-01

The internal structure (the monomer density profiles) of weakly charged polyelectrolyte brushes of different morphologies has been analyzed on the basis of the self-consistent-field approach. In contrast to previous studies based on the local electroneutrality approximation valid for sufficiently strongly charged or densely grafted (“osmotic") brushes we consider the opposite limit of sparse brushes which are unable to retain the counterions inside the brush. We have shown that an exact analytical solution of the SCF-equations is available in the case of a planar brush. In contrast to Gaussian monomer density profile known for “osmotic" polyelectrolyte brushes we have found that weakly charged brushes are characterized by constant monomer density. At the same time free ends of grafted polyions are distributed throughout the brush. Thus, the structural cross-over between polyelectrolyte “mushrooms" and dense brush regimes is established.

Effects of desensitizing toothpastes on the permeability of dentin after different brushing times: An in vitro study.

PubMed

Yang, Meng; Lin, Hong; Jiang, Ruodan; Zheng, Gang

2016-12-01

To investigate the effects of three commercially available desensitizing toothpastes on dentin permeability, and compare the efficacy of each product for reducing dentin permeability in the short term according to the frequency and duration of usage. 100 dentin discs with no caries were prepared from freshly extracted human third molar teeth. The dentin discs were brushed with three desensitizing toothpastes or with a non-desensitizing toothpaste and distilled water, which served as control. The 100 dentin slices were randomly divided into two groups (n= 50): one group underwent continuous brushing (brushed for 3 minutes continuously), and the other group underwent discontinuous brushing (brushed three times, each time for 1 minute). Then, the two groups were divided into five subgroups (n = 10) for the five brushing applications. Dentin permeability was measured with a hydraulic permeability system before and after brushing. All desensitizing toothpastes reduced dentin permeability significantly after treatment. Sensodyne Repair and Protect (calcium sodium phosphosilicate) and discontinuous brushing reduced dentin permeability significantly compared with continuous brushing. Dentin permeability values showed no significant difference between the three toothpastes after 3 minutes of continuous brushing. When comparing the three toothpastes under discontinuous brushing conditions after 3 minutes, Sensodyne Repair and Protect (calcium sodium phosphosilicate) reduced dentin permeability significantly. Sensodyne Repair and Protect (calcium sodium phosphosilicate) and discontinuous brushing reduced dentin permeability significantly compared with continuous brushing. Moreover, brushing with Sensodyne Repair and Protect (calcium sodium phosphosilicate) resulted in the lowest dentin permeability compared with those of the other two toothpastes. These results indicated that Sensodyne Repair and Protect may relieve dentin hypersensitivity.

Application of tooth brushing behavior to active rest.

PubMed

Sadachi, Hidetoshi; Murakami, Yoshinori; Tonomura, Manabu; Yada, Yukihiro; Simoyama, Ichiro

2010-01-01

We evaluated the usefulness of tooth brushing with toothpaste as active rest using the flicker value as a physiological parameter and a subjective questionnaire as a psychological parameter. Seventeen healthy, right-handed subjects (12 males and 5 females) aged 22.5 +/- 1.5 yr (mean +/- standard deviation) were randomly divided into tooth brushing with toothpaste (N=9) and non-tooth brushing groups (N=8). The subjects performed a serial calculation task for 20 min using personal computers. Subsequently, the tooth brushing group brushed their teeth, and the flicker value and mood were compared before and after the tooth brushing. The flicker value significantly increased in the tooth brushing group compared with the non-tooth brushing group (p<0.05). Concerning the mood, in the tooth brushing group, the incidence of a "feeling of being refreshed" significantly increased (p<0.05), that of "concentration power" or a "feeling of clear-headedness" tended to increase (p<0.1), and that of "lassitude" or "sleepiness" significantly decreased (p<0.01). Somatosensory stimulation and intraoral tactile stimulation during tooth brushing activated cerebral activity, producing refreshing effects. These results suggest the applicability of tooth brushing to active rest.

Social ranking effects on tooth-brushing behaviour.

PubMed

Maltby, John; Paterson, Kevin; Day, Liz; Jones, Ceri; Kinnear, Hayley; Buchanan, Heather

2016-05-01

A tooth-brushing social rank hypothesis is tested suggesting tooth-brushing duration is influenced when individuals position their behaviour in a rank when comparing their behaviour with other individuals. Study 1 used a correlation design, Study 2 used a semi-experimental design, and Study 3 used a randomized intervention design to examine the tooth-brushing social rank hypothesis in terms of self-reported attitudes, cognitions, and behaviour towards tooth-brushing duration. Study 1 surveyed participants to examine whether the perceived health benefits of tooth-brushing duration could be predicted from the ranking of each person's tooth-brushing duration. Study 2 tested whether manipulating the rank position of the tooth-brushing duration influenced participant-perceived health benefits of tooth-brushing duration. Study 3 used a longitudinal intervention method to examine whether messages relating to the rank positions of tooth-brushing durations causally influenced the self-report tooth-brushing duration. Study 1 demonstrates that perceptions of the health benefits from tooth-brushing duration are predicted by the perceptions of how that behaviour ranks in comparison to other people's behaviour. Study 2 demonstrates that the perceptions of the health benefits of tooth-brushing duration can be manipulated experimentally by changing the ranked position of a person's tooth-brushing duration. Study 3 experimentally demonstrates the possibility of increasing the length of time for which individuals clean their teeth by focusing on how they rank among their peers in terms of tooth-brushing duration. The effectiveness of interventions using social-ranking methods relative to those that emphasize comparisons made against group averages or normative guidelines are discussed. What is already known on this subject? Individual make judgements based on social rank information. Social rank information has been shown to influence positive health behaviours such as exercise. What does this study add? The health benefits of tooth-brushing are predicted by how tooth-brushing duration ranks within a distribution. Focussing on how teeth-cleaning duration ranks among others produces longer teeth-cleaning durations. © 2015 The British Psychological Society.

[Effect of a tooth-brushing education program on oral health of preschool children].

PubMed

Kang, Bok-Hee; Park, Sun-Nam; Sohng, Kyeong-Yae; Moon, Jung-Soon

2008-12-01

To examine the effect of tooth-brushing education on the oral health of preschoolers. A quasi-experimental design with a non-equivalent control group was used. Two kindergartens were selected and 39 preschoolers from one kindergarten were assigned to the experimental group with tooth-brushing education and 39 from the other kindergarten to the control group. The tooth-brushing education program included 1 session on oral health education, individual tooth-brushing instruction for 1 week and supervised tooth-brushing after lunch for 4 weeks. Oral health behavior including use of tooth paste, tooth-brushing time and method of tooth-brushing, plague, streptococcus mutans, lactobacillus and dental caries were measured before and after the education. Fisher's exact test, t-test and paired t-test with the Window SAS 9.1 program were used to analyze the data. A significant increase in the use of tooth paste, tooth-brushing time and the practice of correct tooth-brushing and a decrease in plague and development of dental caries were observed in the experimental group. This tooth-brushing education was partially effective in improving oral health of preschoolers.

Polyelectrolyte brushes on dielectric surfaces

NASA Astrophysics Data System (ADS)

Antila, Hanne; Luijten, Erik

When chains of charged polymers are grafted to a solid surface, a polyelectrolyte (PE) brush results. These types of PE assemblies have a wide range of applications ranging from fuel cells and switchable electrodes to drug delivery. Many of these applications stem from the ability of PE brushes to respond to external stimuli: the brush properties can be tuned, for example, by varying electric field, PE grafting density, pH, salt concentration or salt valency. Accordingly, deciphering the brush behavior under different conditions has been a subject of considerable experimental, theoretical, and computational research efforts. However, the effect of the dielectric properties of the substrate on the PE brush has received much less attention. We use coarse-grained molecular dynamics simulations to show how varying the dielectric mismatch between the solvent and the substrate can significantly affect the brush. We demonstrate how tuning this mismatch can either diminish or enhance the effects of other control parameters, such as pH, on the brush properties. Furthermore, we investigate how dielectric properties of the substrate affect the brush, and the ion distribution and mobility within the brush, when the brush is exposed to an electric field.

Computer simulations of the mechanical response of brushes on the surface of cancerous epithelial cells

NASA Astrophysics Data System (ADS)

Goicochea, A. Gama; Guardado, S. J. Alas

2015-08-01

We report a model for atomic force microscopy by means of computer simulations of molecular brushes on surfaces of biological interest such as normal and cancerous cervical epithelial cells. Our model predicts that the force needed to produce a given indentation on brushes that can move on the surface of the cell (called “liquid” brushes) is the same as that required for brushes whose ends are fixed on the cell’s surface (called “solid” brushes), as long as the tip of the microscope covers the entire area of the brush. Additionally, we find that cancerous cells are softer than normal ones, in agreement with various experiments. Moreover, soft brushes are found to display larger resistance to compression than stiff ones. This phenomenon is the consequence of the larger equilibrium length of the soft brushes and the cooperative association of solvent molecules trapped within the brushes, which leads to an increase in the osmotic pressure. Our results show that a careful characterization of the brushes on epithelial cells is indispensable when determining the mechanical response of cancerous cells.

Baking soda as an abrasive in toothpastes: Mechanism of action and safety and effectiveness considerations.

PubMed

Hara, Anderson T; Turssi, Cecilia P

2017-11-01

Toothpastes can be formulated with different abrasive systems, depending on their intended clinical application. This formulation potentially affects their effectiveness and safety and, therefore, requires proper understanding. In this article, the authors focused on abrasive aspects of toothpastes containing sodium bicarbonate (baking soda), which have gained considerable attention because of their low abrasivity and good compatibility, while providing clinical effectiveness (further detailed in the other articles of this special issue). The authors first appraised the role of toothpaste abrasivity on tooth wear, exploring some underlying processes and the existing methods to determine toothpaste abrasivity. The authors reviewed the available data on the abrasivity of toothpastes containing baking soda and reported a summary of findings highlighting the clinical implications. On the basis of the collected evidence, baking soda has an intrinsic low-abrasive nature because of its comparatively lower hardness in relation to enamel and dentin. Baking soda toothpastes also may contain other ingredients, which can increase their stain removal effectiveness and, consequently, abrasivity. Even those formulations have abrasivity well within the safety limit regulatory agencies have established and, therefore, can be considered safe. Copyright © 2017 American Dental Association. Published by Elsevier Inc. All rights reserved.

Shoe heel abrasion and its possible biomechanical cause: a transversal study with infantry recruits.

PubMed

Baumfeld, Daniel; Raduan, Fernando C; Macedo, Benjamim; Silva, Thiago Alexandre Alves; Baumfeld, Tiago; Favato, Danilo Fabrino; de Andrade, Marco Antonio Percope; Nery, Caio

2015-11-19

Excessive shoe heel abrasion is of concern to patients and shoe manufacturers, but little scientific information is available about this feature and its possible causes. The purpose of this study was to relate this phenomenon with biomechanical factors that could predispose to shoe heel abrasion. Ninety-seven recruits (median age 25) were enrolled in this study. Shoe abrasion was assessed manually with a metric plastic tape on the posterior part of the heel that comes in contact with the ground. The number of sprains, foot alignment, and calf muscle shortening (Silfverskiold test) was also assessed in order to relate it with shoe heel abrasion. After using our exclusion criteria, 86 recruits and 172 were considered for this study. The most common abrasion site was the lateral portion of the heel surface (50 %). Forty-four percent of the participants had neutral hind-foot alignment and 39 % had valgus alignment. Twenty-six (30 %) patients have had previous ankle or foot sprains. Neutral foot was related with less calf muscle shortening. On the other hand, valgus hind-foot alignment was more associated with Achilles shortening (p < 0.05). Patients with neutral alignment were associated with more uniform shoe heel abrasion and varus feet were associated with more central and lateral abrasion (p < 0.05). The pattern of shoe heel abrasion was not statistically related with calf muscle shortening nor with number of sprains. This study was able to correlate shoe heel abrasion with biomechanical causes (neutral alignment-uniform abrasion/varus alignment-central and lateral abrasion). More effort has to be done to continue evaluating outsole abrasion with its possible biomechanical cause in order to predict and treat possible associated injuries.

Solid Lubrication Fundamentals and Applications. Chapter 5; Abrasion: Plowing and Cutting

NASA Technical Reports Server (NTRS)

Miyoshi, Kazuhisa

2001-01-01

Chapter 5 discusses abrasion, a common wear phenomenon of great economic importance. It has been estimated that 50% of the wear encountered in industry is due to abrasion. Also, it is the mechanism involved in the finishing of many surfaces. Experiments are described to help in understanding the complex abrasion process and in predicting friction and wear behavior in plowing and/or cutting. These experimental modelings and measurements used a single spherical pin (asperity) and a single wedge pin (asperity). Other two-body and three-body abrasion studies used hard abrasive particles.

Consumer Health.

ERIC Educational Resources Information Center

Harrelson, Orvis A.; And Others

This guide to consumer health contains two parts, the first of which covers consumerism, cosmetics (aids for skin problems, dandruff, deodorants, dentifrices), food shopping, and clothes shopping. Part 2 discusses health quackery, including arthritis quackery, and mail-order "doctoring", food quackery, weight-reducing products, and how…

Caries-Preventive Effect of NaF, NaF plus TCP, NaF plus CPP-ACP, and SDF Varnishes on Sound Dentin and Artificial Dentin Caries in vitro.

PubMed

Wierichs, Richard J; Stausberg, Sabrina; Lausch, Julian; Meyer-Lueckel, Hendrik; Esteves-Oliveira, Marcella

2018-01-01

The aim of this study was to compare the caries-preventive effect of different fluoride varnishes on sound dentin as well as on artificial dentin caries-like lesions. Bovine dentin specimens (n = 220) with one sound surface (ST) and one artificial caries lesion (DT) were prepared and randomly allocated to 11 groups. The interventions before pH cycling were as follows: application of a varnish containing NaF (22,600 ppm F-; Duraphat [NaF0/NaF1]), NaF plus tricalcium phosphate (22,600 ppm F-; Clinpro White Varnish Mint [TCP0/TCP1]), NaF plus casein phosphopeptide-stabilized amorphous calcium phosphate complexes (CPP-ACP; 22,600 ppm F-; MI Varnish [CPP0/CPP1]), or silver diamine fluoride (SDF; 35,400 ppm F-; Cariestop 30% [SDF0/SDF1]) and no intervention (NNB/N0/N1). During pH cycling (14 days, 6 × 120 min demineralization/day) half of the specimens in each group were brushed (10 s; 2 times/day) with either fluoride-free ("0"; e.g., TCP0) or 1,100 ppm F- ("1"; e.g., TCP1) dentifrice slurry. In another subgroup, the specimens were pH cycled but not brushed (NNB). Differences in integrated mineral loss (ΔΔZ), lesion depth (ΔLD), and colorimetric values (ΔΔE) were calculated between the values after initial demineralization and those after pH cycling, using transversal microradiography and photographic images. After pH cycling, no discoloration could be observed. Furthermore, NNB, N0, and N1 showed significantly increased ΔZDT/LDDT and ΔZST/LDST values, indicating further demineralization. In contrast, CPP0, CPP1, SDF0, and SDF1 showed significantly decreased ΔZDT/LDDT values, indicating remineralization (p ≤ 0.004; paired t test). CPP0, CPP1, SDF0, and SDF1 showed significantly higher changes in ΔΔZDT/ΔLDDT and ΔΔZST/ΔLDST than NNB, N0, and N1 (p < 0.001; Bonferroni post hoc test). In conclusion, under the conditions chosen, all fluoride varnishes prevented further demineralization. However, only NaF plus CPP-ACP and SDF could remineralize artificial dentin caries-like lesions under net-demineralizing conditions, thereby indicating that NaF plus CPP-ACP and SDF may be helpful to high-caries-risk patients. © 2018 S. Karger AG, Basel.

DNA decontamination of fingerprint brushes.

PubMed

Szkuta, Bianca; Oorschot, Roland A H van; Ballantyne, Kaye N

2017-08-01

Genetic profiling of DNA collected from fingerprints that have been exposed to various enhancement techniques is routine in many forensic laboratories. As a result of direct contact with fingermark residues during treatment, there is concern around the DNA contamination risk of dusting fingermarks with fingerprint brushes. Previous studies have demonstrated the potential for cross-contamination between evidentiary items through various mechanisms, highlighting the risk of using the same fingerprint brush to powder multiple surfaces within and between crime-scenes. Experiments were performed to assess the contamination risk of reused fingerprint brushes through the transfer of dried saliva and skin deposits from and to glass surfaces with new unused squirrel hair and fiberglass brushes. Additional new unused brushes and brushes previously used in casework were also tested for their ability to contaminate samples. In addition, the ability to eradicate DNA from used squirrel hair and fiberglass fingerprint brushes was assessed using a 1% sodium hypochlorite solution and a 5% solution of a commercially available alternative, Virkon. DNA profiling results from surfaces contacted by treated and untreated brushes were compared to determine the effectiveness of the devised cleaning protocol. Brush durability was also assessed over multiple wash/rinse/dry cycles with both agents. Varying amounts of DNA-containing material were collected and transferred by squirrel hair and fiberglass brushes, with detectability on the secondary surface dependent on the biological nature of the material being transferred. The impact of DNA contamination from dirty fingerprint brushes was most apparent in simulations involving the transfer of dried saliva and brushes previously used in casework, while minimal transfer of touch DNA was observed. Alarmingly, large quantities of DNA were found to reside on new unused squirrel hair brushes, while no DNA was detected on new unused fiberglass brushes or brushes sold as DNA-free. Squirrel hair brushes were easily and effectively cleaned with both hypochlorite and Virkon, with no evidence of DNA transfer between exhibits by treated brushes. Brushes were still deemed useable after multiple cleaning cycles with either agent. In contrast, fiberglass bristles became tangled and matted when wet and could not be cleaned effectively using either method. It is recommended they are disposed of following use. Each laboratory should consider their current circumstances before adapting a cleaning method. The implementation of a program to monitor the effectiveness of the cleaning regime is also advised. Copyright © 2017 Elsevier B.V. All rights reserved.

Preparation and characterization of polymeric nanocomposite films for application as protective coatings

NASA Astrophysics Data System (ADS)

Gagliardi, S.; Rondino, F.; D'Erme, C.; Persia, F.; Menchini, F.; Santarelli, M. L.; Paulke, B.-R.; Enayati, A. L.; Falconieri, M.

2017-08-01

Addiction of ceramic nanoparticles to acrylic polymers provides a simple and effective means to produce paints with important properties, such as mechanical resistance and tailored wettability, even though for optimal performances, an engineered nanoparticle distribution would be desirable. In this paper we report on the realization and on the morphological and functional characterization of nanocomposites where the nanophase is distributed on the surface of acrylic polymer films, in order to enhance the expression of surface-related properties. To this aim, commercial titanium oxide and silicon oxide nanopowders were dispersed in water and the suspensions were air-sprayed on polymeric films prepared by paint brushing, thus producing a nanostructured ceramic surface coating. Control of the pH of suspensions and acrylic acid functionalization of the surface of titania were used together with high power ultrasonic treatments in order to control dimension of the aggregates in the sprayed suspensions. Optical microscopy, mechanical profilometry, and atomic force microscopy were used to characterize the nanocomposite surface morphology and correlate it to the coating functional properties, evaluated through mechanical abrasion tests and contact angle measurements; also, colorimetry on coated stones was performed in order to test the impact of the coatings on the aesthetical appearance and their photostability under UV irradiation. Results show that the nanostructured ceramic layer slightly improves the resistance of coatings to mechanical abrasion in case of polymer films prepared from latexes. The nanocomposite surface layer does not affect the wettability of the polymer, which remained slightly hydrophilic; this behavior is likely due to inadequate distribution of the nanophase. On the other hand UV-induced superhydrophilicity was observed when the concentration of surface titania nanoparticles is about 0.6 mg/cm2. Colorimetric analysis on historical and Carrara marbles before and after coating evidenced the good transparency of the nanocomposites. Accelerated aging tests permitted to demonstrate that, on the historical marbles, the presence of the nanoparticles has a protective action against UV-induced damage of the underlying polymer film, preventing photodegradation.

SPARCLE: Space Plasma Alleviation of Regolith Concentrations in the Lunar Environment

NASA Astrophysics Data System (ADS)

Clark, P. E.; Keller, J. W.; Curtis, S. A.; Nuth, J. A.; Stubbs, T. J.; Farrell, W. M.

2006-05-01

The return of robotic devices and humans to the Moon will occur in the near future. Based on our previous experience, surface dust is a major problem requiring a solution: During Apollo landings, extensive locally- induced stirring of the regolith caused dust to be suspended long enough to come into contact with conducting surfaces. Dust behaved like abrasive Velcro: it adhered to everything and attempts to remove it by simply brushing did not remove fines (<10) and resulted in severe abrasion. Lunar fines, because of their electrostatic charging, were relatively difficult to collect in sample bags along with other size range particles. Within hours, seals were broken, samples contaminated, and portions of the samples, especially fines, lost. Because of this difficulty, details on lunar dust are relatively sparse. Obviously, the strategies initially implemented to deal with lunar dust failed. A major technological challenge will be developing a dust mitigation strategy. A currently proposed strategy based increased magnetic susceptibility in lunar fines may not work uniformly well for fines of non-mare, or non-lunar, composition. Based on dust behavior already observed on previous missions, we believe the successful strategy will deal with dust dynamics resulting from interaction between mechanical and electrostatic forces. We are planning test and develop an electrostatically-based device to modulate the electrical potential of conducting surfaces, hence to self clean exposed surfaces while collecting dust samples. It would scan a surface constantly to control its potential, and a plate of the opposite potential. As a first step, an experimental low mass, power, and volume device with complimentary electron and ion guns with specially designed self-cleaning nozzles are being designed for to test our concept and develop a working charging and discharging strategy in the lunar environment. Meanwhile, a laboratory simulation will act as a feasibility study for a laboratory breadboard self-cleaning device based on the use of combined electron or ion beams. The compact device would act as plasma dust sweeper.

Abrasion Plus Local Fibrin Sealant Instillation Produces Pleurodesis Similar to Pleurectomy in Rabbits.

PubMed

Marchi, Evaldo; de Carvalho, Marcus V H; Ventureli, Tiago R; Fruchi, Andre J; Lazaro, Ariane; do Carmo, Deborah C; Barreto, Thayssa Y A S; Dias, Bruno V B; Acencio, Milena M P; Teixeira, Lisete R; Light, Richard W

2016-09-01

Pleurodesis performed either by pleurectomy or pleural abrasion is recommended in the approach to primary spontaneous pneumothorax to avoid recurrence. However, the efficacy of parietal pleural abrasion in producing pleurodesis is questioned. This study aims to determine the efficacy of apical abrasion alone, abrasion plus fibrin sealant application, and pleurectomy in producing pleurodesis in rabbits. Rabbits were subjected to video-assisted thoracic surgery alone (control) or to video-assisted thoracic surgery with apical gauze abrasion, abrasion plus fibrin sealant instillation, or apical pleurectomy. Blood samples were collected preoperatively and 48 h and 28 days postoperatively to measure total leukocytes (white blood cell count), neutrophil counts, and serum interleukin (IL)-8 levels. After 28 days the animals were sacrificed for macroscopic evaluation of the degree of apical pleurodesis and microscopic evaluation of local pleural fibrosis and collagen deposition. White blood cell and neutrophil counts were similar in all groups, whereas the serum IL-8 level peaked at 48 h in all groups and decreased after 28 days, except in the pleurectomy group. After 28 days the abrasion plus fibrin sealant and pleurectomy groups had significantly more pleural adhesions, pleural fibrosis, and collagen deposition than the abrasion alone group, mainly due to thick mature fibers. Abrasion with local fibrin sealant instillation is as effective as pleurectomy in producing pleurodesis in rabbits. Apical pleurectomy elicits a more persistent elevation of serum IL-8 levels than apical abrasion alone or abrasion plus fibrin adhesive instillation. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Process Monitoring Evaluation and Implementation for the Wood Abrasive Machining Process

PubMed Central

Saloni, Daniel E.; Lemaster, Richard L.; Jackson, Steven D.

2010-01-01

Wood processing industries have continuously developed and improved technologies and processes to transform wood to obtain better final product quality and thus increase profits. Abrasive machining is one of the most important of these processes and therefore merits special attention and study. The objective of this work was to evaluate and demonstrate a process monitoring system for use in the abrasive machining of wood and wood based products. The system developed increases the life of the belt by detecting (using process monitoring sensors) and removing (by cleaning) the abrasive loading during the machining process. This study focused on abrasive belt machining processes and included substantial background work, which provided a solid base for understanding the behavior of the abrasive, and the different ways that the abrasive machining process can be monitored. In addition, the background research showed that abrasive belts can effectively be cleaned by the appropriate cleaning technique. The process monitoring system developed included acoustic emission sensors which tended to be sensitive to belt wear, as well as platen vibration, but not loading, and optical sensors which were sensitive to abrasive loading. PMID:22163477

Effect of abrasive grit size on wear of manganese-zinc ferrite under three-body abrasion

NASA Technical Reports Server (NTRS)

Miyoshi, Kazuhisa

1987-01-01

Wear experiments were conducted using replication electron microscopy and reflection electron diffraction to study abrasion and deformed layers produced in single-crystal Mn-Zn ferrites under three-body abrasion. The abrasion mechanism of Mn-Zn ferrite changes drastically with the size of abrasive grits. With 15-micron (1000-mesh) SiC grits, abrasion of Mn-Zn ferrite is due principally to brittle fracture; while with 4- and 2-micron (4000- and 6000-mesh) SiC grits, abrasion is due to plastic deformation and fracture. Both microcracking and plastic flow produce polycrystalline states on the wear surfaces of single-crystal Mn-Zn ferrites. Coefficient of wear, total thickness of the deformed layers, and surface roughness of the wear surfaces increase markedly with an increase in abrasive grit size. The total thicknesses of the deformed layers are 3 microns for the ferrite abraded by 15-micron SiC, 0.9 microns for the ferrite abraded by 4-micron SiC, and 0.8 microns for the ferrite abraded by 1-micron SiC.

Solidification/stabilization of spent abrasives and use as nonstructural concrete

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brabrand, D.J.; Loehr, R.C.

1993-01-01

Tons of spent abrasives result each year from the removal of old paint from bridges. Because the spent abrasives contain metals from the paint, some spent abrasives may be considered hazardous by the Toxicity Characteristic (TC) criteria. Incorporation of the spent blasting abrasives in nonstructural concrete (rip-rap, dolphins) offers an opportunity to recycle the spent abrasives while immobilizing potentially leachable metals. This study focused on the Portland Cement Solidification/Stabilization (S/S) of spent blasting abrasives taken from a bridge located in Southeast Texas. The study examined (a) the cadmium, chromium, and lead concentrations in extracts obtained by using the Toxicity Characteristicmore » Leaching Procedure (TCLP) and (b) the compressive strengths of Portland Cement mixes that contained different amounts of the spent abrasives. Performance was measured by meeting the TC criteria as well as the requirements for compressive strength. Study results indicated that considerable quantities of these spent abrasives can be solidified/stabilized while reducing the leachability of cadmium, chromium, and lead and producing compressive strengths over 6,895 kN/m[sup 2] (1,000 psi).« less

Development of a Brush Seals Program Leading to Ceramic Brush Seals

NASA Technical Reports Server (NTRS)

Hendricks, Robert C.; Flower, Ralph; Howe, Harold

1994-01-01

Some events of a U.S. Army/NASA Lewis Research Center brush seals program are reviewed, and the development of ceramic brush seals is described. Some preliminary room-temperature flow data are given, and the results of testing metallic brushes in cryogenic nitrogen are discussed.

Efficient Energy Conversion by Grafting Nanochannels with End-charged Stimuli-responsive Polyelectrolyte Brush

NASA Astrophysics Data System (ADS)

Chen, Guang; Das, Siddhartha

2017-11-01

Polyelectrolyte (PE) brushes have aroused increasing attention in applications in energy conversion and chemical sensing due to the environmentally-responsive and designable nature. PE brushes are charged polymer chains densely grafted on solid-liquid interfaces. By designing copolymeric systems, one can localize the ionizable sites at the brush tip in order to get end-charged PE brushes. Such brushes demonstrate anomalous shrinking/swelling behaviors with tunable environmental parameters such as pH and salt concentration. In this study, we probe the conformation and electrostatics of such PE brush systems with various size, grafting density and charge distribution, and exploit the electrochemomechanical energy conversion capabilities of nanochannels grafted with such PE brush systems. Our results indicate that the presence of the end-charged PE brush layer can massively enhance the streaming potential mediated energy conversion efficiency, and the improvement is more significant in strongly ionic solution.

Inhibitory effect of hydrophilic polymer brushes on surface-induced platelet activation and adhesion.

PubMed

Zou, Yuquan; Lai, Benjamin F L; Kizhakkedathu, Jayachandran N; Brooks, Donald E

2010-12-08

Poly(N,N-dimethylacrylamide) (PDMA) brushes are successfully grown from unplasticized poly(vinyl chloride) (uPVC) by well-controlled surface-initiated atom transfer radical polymerization (SI-ATRP). Molecular weights of the grafted PDMA brushes vary from ≈ 35,000 to 2,170000 Da, while the graft density ranges from 0.08 to 1.13 chains · nm(-2). The polydispersity of the grafted PDMA brushes is controlled within 1.20 to 1.80. Platelet activation (expression of CD62) and adhesion studies reveal that the graft densities of the PDMA brushes play an important role in controlling interfacial properties. PDMA brushes with graft densities between 0.35 and 0.50 chains · nm(-2) induce a significantly reduced platelet activation compared to unmodified uPVC. Moreover, the surface adhesion of platelets on uPVC is significantly reduced by the densely grafted PDMA brushes. PDMA brushes that have high molecular weights lead to a relatively lower platelet activation compared to low-molecular-weight brushes. However, the graft density of the brush is more important than molecular weight in controlling platelet interactions with PVC. PDMA brushes do not produce any significant platelet consumption in platelet rich plasma. Up to a seven-fold decrease in the number of platelets adhered on high graft density brushes is observed compared to the bare PVC surface. Unlike the bare PVC, platelets do not form pseudopodes or change morphology on PDMA brush-coated surfaces. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Effect of Pleural Abrasion on the Treatment of Primary Spontaneous Pneumothorax: A Systematic Review of Randomized Controlled Trials

PubMed Central

Ming, Mo-yu; Cai, Shuang-qi; Chen, Yi-Qiang

2015-01-01

Background Pleural abrasion has been widely used to control the recurrence of primary spontaneous pneumothorax (PSP). However, controversy still exists regarding the advantages and disadvantages of pleural abrasion compared with other interventions in preventing the recurrence of PSP. Methods The PubMed, Embase, and Cochrane Central Register of Controlled Trials databases were searched up to December 15, 2014 to identify randomized controlled trials (RCTs) that compared the effects of pleural abrasion with those of other interventions in the treatment of PSP. The study outcomes included the PSP recurrence rate and the occurrence rate of adverse effects. Results Mechanical pleural abrasion and apical pleurectomy after thoracoscopic stapled bullectomy exhibited similarly persistent postoperative air leak occurrence rates (p = 0.978) and 1-year PSP recurrence rates (p = 0.821), whereas pleural abrasion led to reduced residual chest pain and discomfort (p = 0.001) and a smaller rate of hemothorax (p = 0.036) than did apical pleurectomy. However, the addition of minocycline pleurodesis to pleural abrasion did not reduce the pneumothorax recurrence rate compared with apical pleurectomy (3.8% for both procedures) but was associated with fewer complications. There was no statistical difference in the pneumothorax recurrence rate between mechanical pleural abrasion and chemical pleurodesis with minocycline on either an intention-to-treat basis (4 of 42 versus 0 of 42, p = 0.12; Fisher exact test) or after exclusions (2 of 40 versus 0 of 42, p = 0.24; Fisher exact test). Pleural abrasion plus minocycline pleurodesis also did not reduce the pneumothorax recurrence rate compared with pleural abrasion alone (p = 0.055). Moreover, pleural abrasion plus minocycline pleurodesis was associated with more intense acute chest pain. The postoperative overall recurrence rate in patients who underwent staple line coverage with absorbable cellulose mesh and fibrin glue was similar to that with mechanical abrasion after thoracoscopic bullectomy (13.8% vs. 14.2%, respectively; p = 0.555), but staple line coverage resulted in less postoperative residual pain than mechanical abrasion (0.4% vs.3.2%; p<0.0001). Pleural abrasion after thoracoscopic wedge resection did not decrease the recurrence of pneumothorax compared with wedge resection alone (p = 0.791), but the intraoperative bleeding and postoperative pleural drainage rates were higher when pleural abrasion was performed. Conclusions In addition to resulting in the same pneumothorax recurrence rate, thoracoscopic pleural abrasion with or without minocycline pleurodesis is safer than apical pleurectomy in the treatment of PSP. However, minocycline pleurodesis with or without pleural abrasion is not any more effective than pleural abrasion alone. Moreover, additional mechanical abrasion is not safer than additional staple line coverage with absorbable cellulose mesh and fibrin glue after thoracoscopic bullectomy because of increased postoperative pain. Additionally, pleural abrasion after thoracoscopic wedge resection should not be recommended for routine application due to the greater incidence of adverse effects than wedge resection alone. However, further large-scale, well-designed RCTs are needed to confirm the best procedure. PMID:26042737

Effect of Salt Concentration on the pH Responses of Strong and Weak Polyelectrolyte Brushes.

PubMed

Zhang, Jian; Kou, Ran; Liu, Guangming

2017-07-11

Strong polyelectrolyte brushes (SPB) and weak polyelectrolyte brushes (WPB) have different origins with response to pH, which makes their pH-responsive properties sensitive to salt concentration in different ways. Herein, we have employed poly[2-(methacryloyloxy)ethyl trimethylammonium chloride] (PMETAC) and poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) brushes as model systems for SPB and WPB, respectively, to investigate the effect of salt concentration on the pH responses of SPB and WPB using several surface-sensitive techniques. The pH-responsive properties of the PMETAC brushes are governed by the reorganization of the interchain hydrogen bonds between the grafted chains, whereas the pH response of the PDMAEMA brushes is controlled by the charge of the grafted chains. The response of the properties of the PMETAC brushes including hydration, conformation, and surface wettability becomes weaker with increasing salt concentration induced by the competitive adsorption of counterions to the brushes between OH - and Cl - . The weakening of the pH response of the PMETAC brushes is more remarkable at the relatively high pH values. The pH response of the PDMAEMA brushes also exhibits a salt-concentration dependence. As the salt concentration increases, the weakening of the pH response of the PDMAEMA brushes is attributed to the decrease in osmotic pressure within the brushes at relatively low pH values.

Ordering nanoparticles with polymer brushes

NASA Astrophysics Data System (ADS)

Cheng, Shengfeng; Stevens, Mark J.; Grest, Gary S.

2017-12-01

Ordering nanoparticles into a desired super-structure is often crucial for their technological applications. We use molecular dynamics simulations to study the assembly of nanoparticles in a polymer brush randomly grafted to a planar surface as the solvent evaporates. Initially, the nanoparticles are dispersed in a solvent that wets the polymer brush. After the solvent evaporates, the nanoparticles are either inside the brush or adsorbed at the surface of the brush, depending on the strength of the nanoparticle-polymer interaction. For strong nanoparticle-polymer interactions, a 2-dimensional ordered array is only formed when the brush density is finely tuned to accommodate a single layer of nanoparticles. When the brush density is higher or lower than this optimal value, the distribution of nanoparticles shows large fluctuations in space and the packing order diminishes. For weak nanoparticle-polymer interactions, the nanoparticles order into a hexagonal array on top of the polymer brush as long as the grafting density is high enough to yield a dense brush. An interesting healing effect is observed for a low-grafting-density polymer brush that can become more uniform in the presence of weakly adsorbed nanoparticles.

In vitro effect of calcium-containing prescription-strength fluoride toothpastes on bovine enamel erosion under hyposalivation-simulating conditions.

PubMed

Scaramucci, Taís; Borges, Alessandra B; Lippert, Frank; Zero, Domenick T; Hara, Anderson T

2015-02-01

To evaluate the ability of calcium-containing prescription-strength fluoride (F) toothpastes in preventing enamel erosion under low salivary flow simulating conditions. Enamel and dentin bovine specimens were assigned to the following groups: A - placebo; B - 1,100 ppm F/NaF (Aquafresh Advanced); C - 5,000 ppm F/NaF (Prevident 5000 Booster); D - 5000 ppm F/NaF+calcium sodium phosphosilicate (Topex Renew); and E - 5,000 ppm F/NaF+tri-calcium phosphate (Clinpro 5000). Specimens were positioned in custom-made devices, creating a sealed chamber on the surface, connected to peristaltic pumps. Citric acid was injected into the chamber for 2 minutes, followed by artificial saliva (0.05 ml/minute), for 60 minutes, 4x/day, for 3 days. Aquafresh was also tested under normal salivary flow (0.5 ml/minute), as reference (Group F). Specimens were exposed to the toothpastes for 2 minutes, 2x/day. After cycling, surface loss (SL) and concentration of loosely- and firmly-bound F were determined. Data were analyzed by ANOVA. Results: Group A (placebo) presented highest surface loss (SL), while Group F had the lowest, for both substrates. For enamel, none of the dentifrices differed from Group B or among each other. For dentin, none of the dentifrices differed from Group B, but Group E showed greater protection than Group C. Group E presented the highest F concentrations for both substrates, only matched by Group D for firmly-bound fluoride on enamel. All fluoridated dentifrices tested reduced SL, with no additional benefit from higher F concentrations. Some formulations, especially Clinpro 5000, increased F availability on the dental substrates, but no further erosion protection was observed.

Effect of theobromine-containing toothpaste on dentin tubule occlusion in situ.

PubMed

Amaechi, Bennett T; Mathews, Sapna M; Mensinkai, Poornima K

2015-01-01

Dentin hypersensitivity (DH) is treated by either occlusion of dentin tubules or nerve desensitization. This in situ study compared dentin tubules occlusion by theobromine-containing dentifrices with (Theodent-classic-F®, TCF) and without (Theodent-classic®, TC) fluoride with 1,500 ppm fluoride toothpaste, Colgate®-Regular (Fluoride) and Novamin®-containing toothpaste, Sensodyne®-5000-Nupro (Novamin®). Each subject wore four intraoral appliances bearing dentin blocks while using one of four test dentifrices (n = 20/dentifrice) twice daily for 7 days. The four appliances were removed successively after 1, 2, 3, and 7 days. Treated blocks and their control (untreated) blocks were examined with scanning electron microscopy (SEM). Effects were compared statistically (ANOVA/Tukey's) based on percentage of surface area covered by deposited precipitate layer (%DPL) and percentage of fully open (%FOT), partially occluded (%POT), and completely occluded (%COT) tubules in each block calculated relative to the number of tubules in their control blocks. SEM observation indicated an increased %COT and %DPL over time. After 1 and 2 days, %COT was comparable with TC and TCF, and significantly (p < 0.05) higher compared with Novamin® and Fluoride. Following 3 and 7 days, %COT was comparable among TC, TCF, and Novamin®, but remained significantly lower in Fluoride. At any time, %DPL was significantly (p < 0.05) higher in TC, TCF, and Novamin® compared with Fluoride. Theobromine-containing toothpastes with and without fluoride have equal potential in occluding dentin tubules within a shorter time period than Novamin®-containing toothpaste; however, the three demonstrated equal potential after 1 week, but not the fluoride toothpaste. Theobromine-containing toothpaste promoted dentin tubule occlusion thus shows potential to relief DH.

Antiplaque and antigingivitis toothpastes.

PubMed

Sanz, Mariano; Serrano, Jorge; Iniesta, Margarita; Santa Cruz, Isabel; Herrera, David

2013-01-01

Dentifrices are a general term used to describe preparations that are used together with a toothbrush with the purpose to clean and/or polish the teeth. Active toothpastes were first formulated in the 1950s and included ingredients such as urea, enzymes, ammonium phosphate, sodium lauryl sarcosinate and stannous fluoride. Later, therapeutic agents were included. Today's toothpastes have two objectives: to help the toothbrush in cleaning the tooth surface and to provide a therapeutic effect. The therapeutic effect may have an antiplaque or anti-inflammatory basis when the nature of the agents is antimicrobial. Plaque inhibitory and antiplaque activity of toothpastes used for chemical plaque control is evaluated in distinct consecutive stages, the last being home use randomized clinical trials of at least 6 months' duration. In this chapter, the scientific evidence supporting the use of the most common antiplaque agents, included in toothpaste formulations, is reviewed, with a special emphasis on 6-month clinical trials, and systematic reviews with meta-analyses of the mentioned studies. Among the active agents, the following have been included in toothpastes: enzymes, amine alcohols, herbal or natural products, triclosan, bisbiguanides (chlorhexidine), quaternary ammonium compounds (cetylpyridinium chloride) and different metal salts (zinc salts, stannous fluoride, stannous fluoride with amine fluoride). Dentifrices are the ideal vehicles for any active ingredient used as an oral health preventive measure since they are used in combination with toothbrushing, which is the most frequently employed oral hygiene method. The most important indications of dentifrices with active ingredients are associated with long-term use to prevent bacterial biofilm formation, mostly in gingivitis patients or in patients on supportive periodontal therapy. Copyright © 2013 S. Karger AG, Basel.

Frequency of Fluoride Dentifrice Use and Caries Lesions Inhibition and Repair.

PubMed

Nóbrega, Diego Figueiredo; Fernández, Constanza Estefany; Del Bel Cury, Altair Antoninha; Tenuta, Livia Maria Andaló; Cury, Jaime Aparecido

2016-01-01

The clinical relevance of the frequency of fluoride dentifrice (FD) use on enamel caries is based on evidence. However, the relative effect of FD on reduction of demineralization or enhancement of remineralization is unknown and the effect of frequency on root dentine caries has not been explored. The aim of this double-blind, crossover, in situ study, which was conducted in 4 phases of 14 days each, was to evaluate the relationship between the frequency of FD use and enamel and root dentine de- and remineralization. Eighteen volunteers wore palatal appliances containing enamel and root dentine slabs, either sound or carious. Biofilm accumulation on the slab surface was allowed, and 20% sucrose solution was dripped 3 or 8 times per day on the carious and sound slabs, respectively. Volunteers used FD (1,100 μg F/g) in the frequencies 0 (fluoride-placebo dentifrice), 1, 2 and 3 times per day. The demineralization and remineralization that occurred in sound or carious slabs was estimated by the percentage of surface hardness loss (%SHL) or recovery (%SHR). Loosely (CaF2) and firmly (FAp) bound fluoride concentrations were also determined. The relationship between the variables was analyzed by linear regression. The %SHL, CaF2 and FAp concentrations were a function of the frequency of FD use for enamel and dentine, but the %SHR was a function of the frequency of FD use only for enamel (p < 0.05). The results suggest that demineralization in enamel and root dentine is reduced in proportion to the frequency of FD use, but for remineralization the effect of the frequency of FD use was relevant only to enamel. © 2016 S. Karger AG, Basel.

Ureteral retrograde brush biopsy

MedlinePlus

Biopsy - brush - urinary tract; Retrograde ureteral brush biopsy cytology; Cytology - ureteral retrograde brush biopsy ... should not be performed in people with a: Urinary tract infection Blockage at or below the biopsy site ...

Aliasing Signal Separation of Superimposed Abrasive Debris Based on Degenerate Unmixing Estimation Technique.

PubMed

Li, Tongyang; Wang, Shaoping; Zio, Enrico; Shi, Jian; Hong, Wei

2018-03-15

Leakage is the most important failure mode in aircraft hydraulic systems caused by wear and tear between friction pairs of components. The accurate detection of abrasive debris can reveal the wear condition and predict a system's lifespan. The radial magnetic field (RMF)-based debris detection method provides an online solution for monitoring the wear condition intuitively, which potentially enables a more accurate diagnosis and prognosis on the aviation hydraulic system's ongoing failures. To address the serious mixing of pipe abrasive debris, this paper focuses on the superimposed abrasive debris separation of an RMF abrasive sensor based on the degenerate unmixing estimation technique. Through accurately separating and calculating the morphology and amount of the abrasive debris, the RMF-based abrasive sensor can provide the system with wear trend and sizes estimation of the wear particles. A well-designed experiment was conducted and the result shows that the proposed method can effectively separate the mixed debris and give an accurate count of the debris based on RMF abrasive sensor detection.

Comparison of Three types of Tooth Brushes on Plaque and Gingival Indices: A Randomized Clinical Trial.

PubMed

Moeintaghavi, Amir; Sargolzaie, Naser; Rostampour, Mehrnoosh; Sarvari, Sara; Kargozar, Sanaz; Gharaei, Shideh

2017-01-01

To compare clinical results of three types of manual tooth brushes on plaque removal efficacy and gingivitis. This study is a single blind randomized trial with crossover design which involved 30 periodontaly healthy individuals. Professional plaque removal and oral hygiene instruction were performed for all the participants in the first step of our study followed by asking them to avoid brushing for 2 days. Thereafter plaque and gingivitis scores were measured using plaque and gingival indices (PI and GI). Then subjects were instructed to use Pulsar tooth brush for a two-week period and then, GI and PI indices were assessed again. After passing one-week period for wash out, subjects didn't brush for 2 days and indices were recorded again. The same procedure was done for CrossAction, and Butler 411 tooth brushes respectively and at the end of the study these variables were analyzed using SPSS software ver.16. Repeated measurement ANOVA test was used to compare the scores between different brushes. Finding of this study reveals that using all three types of tooth brushes resulted in significant plaque and gingivitis reduction compared to baseline levels. Pulsar tooth brush was significantly more effective in diminishing PI and GI than Butler tooth brush (p=0.044 and 0.031 respectively). According to our findings all 3 types of tooth brushes are effective in reduction of plaque and gingivitis and this reduction is significantly greater for Pulsar tooth brush compared to Butler and CrossAction tooth brushes.

Self-Renewing Microns-Thick Biopolymer Brush Made of Hyaluronan under Active Synthesis

NASA Astrophysics Data System (ADS)

Wei, W.; Washburn, J.; Weigel, P.; Curtis, J. E.

Hyaluronan (HA) is a large anionic polysaccharide distributed throughout many vertebrate tissues. We introduce a technology to produce dynamic HA polymer brush interfaces. The strategy relies on the enzyme hyaluronan synthase (HA synthase), which synthesizes and extrudes HA polymers up to 20 microns in length. We show that interfaces decorated by HA synthase-rich membrane fragments robustly produce polymer brushes of predictable heights and concentration profiles. The brush thickness can be tuned by the duration of growth or the enzyme density in the membranes. The system is self-renewing in that old polymers desorb and new polymers are produced. The brush can also be replenished after enzymatic removal multiple times. The large extent of the polymer interface allows for characterization of the brush architecture and for studying dynamic processes inside the brush using optical microscopy. At low ionic strengths (1 mM), we measure one of the largest polymer brushes yet reported, an average of 7.8 microns thick. For applications that require a stable brush interface, we have covalently reinforced the HA to the surfaces, and demonstrated that the brush is stable for at least two months. This self-renewing, dynamic biopolymer brush has great potential as a new biomaterial for implants, antifouling, tissue engineering and drug delivery.

Low Temperature Cure Powder Coatings (LTCPC)

DTIC Science & Technology

2010-10-01

17  3.2.2.5  Abrasion Resistance ...criteria • N/A Field Service Evaluation: • Coating Appearance • Adhesion • Fluids Resistance • Humidity Resistance • Abrasion Resistance • Low...Results • Abrasion Resistance • Low Temperature Flexibility humidity • Document occurrences of coating abrasions during

Surface friction of hydrogels with well-defined polyelectrolyte brushes.

PubMed

Ohsedo, Yutaka; Takashina, Rikiya; Gong, Jian Ping; Osada, Yoshihito

2004-08-03

Hydrogels of poly(2-hydroxyethyl methacrylate) (PHEMA) with well-defined polyelectrolyte brushes of poly(sodium 4-styrenesulfonate) (PNaSS) of various molecular weights were synthesized, keeping the distance between the polymer brushes constant at ca. 20 nm. The effect of polyelectrolyte brush length on the sliding friction against a glass plate, an electrorepulsive solid substrate, was investigated in water in a velocity range of 7.5 x 10(-5) to 7.5 x 10(-2) m/s. It is found that the presence of polymer brush can dramatically reduce the friction when the polymer brushes are short. With an increase in the length of the polymer brush, this drag reduction effect only works at a low sliding velocity, and the gel with long polymer brushes even shows a higher friction than that of a normal network gel at a high sliding velocity. The strong polymer length and sliding velocity dependence indicate a dynamic mechanism of the polymer brush effect.

Anthrax Cases Associated with Animal-Hair Shaving Brushes.

PubMed

Szablewski, Christine M; Hendricks, Kate; Bower, William A; Shadomy, Sean V; Hupert, Nathaniel

2017-05-01

During the First World War, anthrax cases in the United States and England increased greatly and seemed to be associated with use of new shaving brushes. Further investigation revealed that the source material and origin of shaving brushes had changed during the war. Cheap brushes of imported horsehair were being made to look like the preferred badger-hair brushes. Unfortunately, some of these brushes were not effectively disinfected and brought with them a nasty stowaway: Bacillus anthracis. A review of outbreak summaries, surveillance data, and case reports indicated that these cases originated from the use of ineffectively disinfected animal-hair shaving brushes. This historical information is relevant to current public health practice because renewed interest in vintage and animal-hair shaving brushes has been seen in popular culture. This information should help healthcare providers and public health officials answer questions on this topic.

Quantitative evaluation of toothbrush and arm-joint motion during tooth brushing.

PubMed

Inada, Emi; Saitoh, Issei; Yu, Yong; Tomiyama, Daisuke; Murakami, Daisuke; Takemoto, Yoshihiko; Morizono, Ken; Iwasaki, Tomonori; Iwase, Yoko; Yamasaki, Youichi

2015-07-01

It is very difficult for dental professionals to objectively assess tooth brushing skill of patients, because an obvious index to assess the brushing motion of patients has not been established. The purpose of this study was to quantitatively evaluate toothbrush and arm-joint motion during tooth brushing. Tooth brushing motion, performed by dental hygienists for 15 s, was captured using a motion-capture system that continuously calculates the three-dimensional coordinates of object's motion relative to the floor. The dental hygienists performed the tooth brushing on the buccal and palatal sides of their right and left upper molars. The frequencies and power spectra of toothbrush motion and joint angles of the shoulder, elbow, and wrist were calculated and analyzed statistically. The frequency of toothbrush motion was higher on the left side (both buccal and palatal areas) than on the right side. There were no significant differences among joint angle frequencies within each brushing area. The inter- and intra-individual variations of the power spectrum of the elbow flexion angle when brushing were smaller than for any of the other angles. This study quantitatively confirmed that dental hygienists have individual distinctive rhythms during tooth brushing. All arm joints moved synchronously during brushing, and tooth brushing motion was controlled by coordinated movement of the joints. The elbow generated an individual's frequency through a stabilizing movement. The shoulder and wrist control the hand motion, and the elbow generates the cyclic rhythm during tooth brushing.

Analysis of tooth brushing cycles.

PubMed

Tosaka, Yuki; Nakakura-Ohshima, Kuniko; Murakami, Nozomi; Ishii, Rikako; Saitoh, Issei; Iwase, Yoko; Yoshihara, Akihiro; Ohuchi, Akitsugu; Hayasaki, Haruaki

2014-11-01

The aim of this study was to demonstrate the effectiveness of an analysis of tooth brushing cycles using a system that measures tooth brushing motion and brushing force with an accelerometer and strain tension gage attached to a toothbrush. Mechanical plaque removal with a manual toothbrush remains the primary method of maintaining good oral hygiene for the majority of the population. Because toothbrush motion has not been fully understood, it should be clarified by analysis of tooth brushing cycles. Twenty healthy female dental hygienists participated in this study. Their tooth brushing motions were measured and analyzed using an American Dental Association-approved manual toothbrush to which a three-dimensional (3-D) accelerometer and strain tension gage were attached. 3-D motion and brushing force on the labial surface of the mandibular right central incisor and the lingual surface of the mandibular left first molar were measured, analyzed, and compared. Multilevel linear model analysis was applied to estimate variables and compare motion and forces related to the two tooth surfaces. The analysis of tooth brushing cycles was feasible, and significant differences were detected for durations and 3-D ranges of toothbrush motion as well as brushing force between the two tooth surfaces. The analysis used in this study demonstrated an ability to detect characteristics of tooth brushing motion, showing tooth brushing motion to change depending on the brushed location. These results also suggest that more detailed instructions might be required according to patient's oral condition.

Brush seals for cryogenic applications

NASA Astrophysics Data System (ADS)

Proctor, Margaret P.

1994-07-01

This viewgraph presentation presents test results of brush seals for cryogenic applications. Leakage for a single brush seal was two to three times less than for a 12-tooth labyrinth seal. The maximum temperature rise for a single brush seal was less than 50 R and occurred at 25 psid across the seal and 35,000 rpm. A static blowout test demonstrated sealing capability up to 550 psid. The seal limit was not obtained. The power loss for a single brush at 35,000 rpm and 175 psid was 2.45 hp. Two brushes far apart leak less than two brushes tight packed. Rotor wear was approximately 0.00075 mils and bristle wear was 1-3 mils after 4-1/2 hours.

A Laterally-Mobile Mixed Polymer/Polyelectrolyte Brush Undergoes a Macroscopic Phase Separation

NASA Astrophysics Data System (ADS)

Lee, Hoyoung; Park, Hae-Woong; Tsouris, Vasilios; Choi, Je; Mustafa, Rafid; Lim, Yunho; Meron, Mati; Lin, Binhua; Won, You-Yeon

2013-03-01

We studied mixed PEO and PDMAEMA brushes. The question we attempted to answer was: When the chain grafting points are laterally mobile, how will this lateral mobility influence the structure and phase behavior of the mixed brush? Two different model mixed PEO/PDMAEMA brush systems were prepared: a mobile mixed brush by spreading a mixture of two diblock copolymers, PEO-PnBA and PDMAEMA-PnBA, onto the air-water interface, and an inseparable mixed brush using a PEO-PnBA-PDMAEMA triblock copolymer having respective brush molecular weights matched to those of the diblock copolymers. These two systems were investigated by surface pressure-area isotherm, X-ray reflectivity and AFM imaging measurements. The results suggest that the mobile mixed brush undergoes a lateral macroscopic phase separation at high chain grafting densities, whereas the inseparable system is only microscopically phase separated under comparable brush density conditions. We also conducted an SCF analysis of the phase behavior of the mixed brush system. This analysis further supported the experimental findings. The macroscopic phase separation observed in the mobile system is in contrast to the microphase separation behavior commonly observed in two-dimensional laterally-mobile small molecule mixtures.

Ordering nanoparticles with polymer brushes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Shengfeng; Stevens, Mark J.; Grest, Gary S.

Ordering nanoparticles into a desired super-structure is often crucial for their technological applications. We use molecular dynamics simulations to study the assembly of nanoparticles in a polymer brush randomly grafted to a planar surface as the solvent evaporates. Initially, the nanoparticles are dispersed in a solvent that wets the polymer brush. After the solvent evaporates, the nanoparticles are either inside the brush or adsorbed at the surface of the brush, depending on the strength of the nanoparticle-polymer interaction. For strong nanoparticle-polymer interactions, a 2-dimensional ordered array is only formed when the brush density is finely tuned to accommodate a singlemore » layer of nanoparticles. When the brush density is higher or lower than this optimal value, the distribution of nanoparticles shows large fluctuations in space and the packing order diminishes. For weak nanoparticle-polymer interactions, the nanoparticles order into a hexagonal array on top of the polymer brush as long as the grafting density is high enough to yield a dense brush. As a result, an interesting healing effect is observed for a low-grafting-density polymer brush that can become more uniform in the presence of weakly adsorbed nanoparticles.« less

Ordering nanoparticles with polymer brushes

DOE PAGES

Cheng, Shengfeng; Stevens, Mark J.; Grest, Gary S.

2017-12-08

Ordering nanoparticles into a desired super-structure is often crucial for their technological applications. We use molecular dynamics simulations to study the assembly of nanoparticles in a polymer brush randomly grafted to a planar surface as the solvent evaporates. Initially, the nanoparticles are dispersed in a solvent that wets the polymer brush. After the solvent evaporates, the nanoparticles are either inside the brush or adsorbed at the surface of the brush, depending on the strength of the nanoparticle-polymer interaction. For strong nanoparticle-polymer interactions, a 2-dimensional ordered array is only formed when the brush density is finely tuned to accommodate a singlemore » layer of nanoparticles. When the brush density is higher or lower than this optimal value, the distribution of nanoparticles shows large fluctuations in space and the packing order diminishes. For weak nanoparticle-polymer interactions, the nanoparticles order into a hexagonal array on top of the polymer brush as long as the grafting density is high enough to yield a dense brush. As a result, an interesting healing effect is observed for a low-grafting-density polymer brush that can become more uniform in the presence of weakly adsorbed nanoparticles.« less

The effect of tooth brushing and flossing sequence on interdental plaque reduction and fluoride retention: A randomized controlled clinical trial.

PubMed

Mazhari, Fatemeh; Boskabady, Marzie; Moeintaghavi, Amir; Habibi, Atieh

2018-05-09

Mechanical plaque control methods such as brushing and flossing are highly recommended to remove dental plaque. The aim of this study is to evaluate the efficacy of the sequence of brushing and flossing on reducing interdental plaque and increasing fluoride retention in that area. This randomized controlled crossover trial was conducted on 25 dental students. After prophylaxis, they were asked to discontinue all forms of oral hygiene for 48 hours. The study was performed in two phases with two-week washout intervals. In one phase, they first brushed, then flossed (sequence 1: brush-floss group). In the other phase they initially used dental floss then brushed (sequence 2: floss-brush group). At each phase, dental plaque (using the Rustogi Modified Navy Plaque Index) and fluoride concentrations (using a fluoride ion specific electrode) were measured before and after flossing and brushing, and the dental plaque reduction and fluoride increase were compared between the two groups using the mixed model test. A significance level of 5% was selected. In the floss-brush group interdental and whole plaque was reduced significantly more than the brush-floss group (p = 0.001, p = 0.009 respectively). However, marginal plaque did not show any statistically significant difference between the two groups (p = 0.2). Fluoride concentrations in interdental plaque were significantly higher in the floss-brush group than the other group (p = 0.027). The results showed that flossing followed by brushing is preferred to brushing then flossing in order to reduce interdental plaque and increase fluoride concentration in interdental plaque. This article is protected by copyright. All rights reserved. © 2018 American Academy of Periodontology.

Study on brush of moving electrode type electrostatic precipitator (MEEP)

NASA Astrophysics Data System (ADS)

Zhao, Haibao; He, Yuzhong; Yao, Yuping

2018-02-01

MEEP was an efficient particle removal technology for coal plant and sintering machine. As the stability of brush in MEEP was relatively poor, the experiments was designed for the brush which was made by 0Cr18Ni9 stainless steel wire to find the failure mode and cause. Combining the results of the experiments, the failure models of brushes were different under different conditions and the brushes were suitable for being used in the condition of small diameter particles. And the life span of brushes can be more than 6 years.

Turbine-Driven Pipe-Cleaning Brush

NASA Technical Reports Server (NTRS)

Werlink, Rudy J.; Rowell, David E.

1994-01-01

Simple pipe-cleaning device includes small turbine wheel axially connected, by standoff, to circular brush. Turbine wheel turns on hub bearing attached to end of upstream cable. Turbine-and-brush assembly inserted in pipe with cable trailing upstream and brush facing downstream. Water or cleaning solution pumped through pipe. Cable held at upstream end, so it holds turbine and brush in pipe at location to be cleaned. Flow in pipe turns turbine, which turns wheel, producing desired cleaning action. In addition to brushing action, device provides even mixing of cleaning solution in pipe.

Short communication: use of a mechanical brush by Holstein dairy cattle around parturition.

PubMed

Newby, Nathalie C; Duffield, Todd F; Pearl, David L; Leslie, Ken E; LeBlanc, Stephen J; von Keyserlingk, Marina A G

2013-04-01

Grooming is a normal behavior that may contribute to relief of stress. The purpose of this study was to investigate the effect of access to a mechanical brush on auto-grooming behavior in parturient cows. The hypothesis was that cows would increase the total time spent scratching using the brush if they had access to a brush around the time of calving, whereas auto-grooming would be lower for the brush group compared with the no-brush group. The use of a mechanical brush was analyzed both in a group-housed pen (72 to 48 h before calving) and in an individual maternity pen (6h before to 6h after calving) in 16 multiparous Holstein cows. In the maternity pen, cows were randomly assigned to have access to the brush or not. The provision of a mechanical brush in the individual maternity pen did not change the amount of time spent auto-grooming but cows did use the brush before calving and after the calf was removed. Despite being housed in pens containing a brush, cows failed to use it when the calf was present. However, cows with access to a brush spent more time licking their calves in the first hour postcalving (β=8.7 min; 95% confidence interval: 1.5, 15.8) than cows that did not have access to a brush. Regardless of treatment, cows increased the time spent auto-grooming and scratching following separation of their newborn calf (β=1.4 min; 95% confidence interval: 0.46, 2.3 and β=0.07 min; 95% confidence interval: 0.02, 0.12, respectively). Further research is warranted to investigate possible benefits of mechanical brush devices at the time of calving, particularly for cows that experience difficult calving and require manual or mechanical assistance. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Structure of Polyelectrolyte Brushes in the Presence of Multivalent Counterions

DOE PAGES

Yu, Jing; Mao, Jun; Yuan, Guangcui; ...

2016-07-20

Polyelectrolyte brushes are of great importance to a wide range of fields, ranging from colloidal stabilization to responsive and tunable materials to lubrication. Here, we synthesized high-density polystyrenesulfonate (PSS) brushes using surface initiated atom transfer radical polymerization and performed neutron reflectivity (NR) and surface force measurements using a surface forces apparatus (SFA) to investigate the effect of monovalent Na +, divalent Ca 2+, Mg 2+, and Ba 2+, and trivalent Y 3+ counterions on the structure of the PSS brushes. NR and SFA results demonstrate that in monovalent salt solution the behavior of the PSS brushes agrees with scaling theorymore » well, exhibiting two distinct regimes: the osmotic and salted brush regimes. Introducing trivalent Y 3+ cations causes an abrupt shrinkage of the PSS brush due to the uptake of Y 3+ counterions. The uptake of Y 3+ counterions and shrinkage of the brush are reversible upon increasing the concentration of monovalent salt. Divalent cations, Mg 2+, Ca 2+, and Ba 2+, while all significantly affecting the structure of PSS brushes, show strong ion specific effects that are related to the specific interactions between the divalent cations and the sulfonate groups. Our results demonstrate that the presence of multivalent counterions, even at relatively low concentrations, can strongly affect the structure of polyelectrolyte brushes. Finally, the results also highlight the importance of ion specificity to the structure of polyelectrolyte brushes in solution.« less

Evaluation of the tooth brushing skills in children aged 6-12 years.

PubMed

Pujar, P; Subbareddy, V V

2013-08-01

To evaluate the tooth brushing skills in children aged between 6 and 12 years and its relation with age, type of grip used, duration of brushing and gender. A total of 105 children aged between 6 and 12 years were divided into seven groups and their plaque scores, type of grip used and duration of brushing were assessed. The most preferred grip was the distal oblique (58.1 %). Oblique, distal oblique and power grips were more efficient (plaque reduction up to 70 %). Plaque removal efficacy improved with age (57 % in 6-year-olds and 82 % in 12-year-old children). Plaque reduction was greater when the duration of brushing was longer (82 % plaque reduction when the brushing time was >2.5 min). Overall, the mean duration of tooth brushing in children aged 6-12 years was 1.71 min (103 s). Tooth brushing skills improved with age and the duration of tooth brushing made a significant difference to the oral hygiene status of the child. The type of grip used and gender did not influence tooth brushing ability in this group of children. Tooth brushing skills were low in children younger than 10 years of age. Hence, parental supervision is considered necessary and recommended until 10 years of age.

Study of Effect of Impacting Direction on Abrasive Nanometric Cutting Process with Molecular Dynamics

NASA Astrophysics Data System (ADS)

Li, Junye; Meng, Wenqing; Dong, Kun; Zhang, Xinming; Zhao, Weihong

2018-01-01

Abrasive flow polishing plays an important part in modern ultra-precision machining. Ultrafine particles suspended in the medium of abrasive flow removes the material in nanoscale. In this paper, three-dimensional molecular dynamics (MD) simulations are performed to investigate the effect of impacting direction on abrasive cutting process during abrasive flow polishing. The molecular dynamics simulation software Lammps was used to simulate the cutting of single crystal copper with SiC abrasive grains at different cutting angles (0o-45o). At a constant friction coefficient, we found a direct relation between cutting angle and cutting force, which ultimately increases the number of dislocation during abrasive flow machining. Our theoretical study reveal that a small cutting angle is beneficial for improving surface quality and reducing internal defects in the workpiece. However, there is no obvious relationship between cutting angle and friction coefficient.

Control technology for crystalline silica exposures in construction: wet abrasive blasting.

PubMed

Golla, Vijay; Heitbrink, William

2004-03-01

This study was designed to document the effect that wet abrasive blasting has on reducing worker exposure to crystalline silica, which has been associated with silicosis and premature death. In this study, worker exposure to respirable crystalline silica was monitored during wet abrasive blasting on the exterior walls of a parking garage to remove surface concrete and expose the underlying aggregate. In this process a wet sand mix comprised of 80% dry sand and 20% water was used. Sampling and analysis revealed that the geometric mean respirable quartz concentration was 0.2 mg/m(3) for workers conducting abrasive blasting and 0.06 mg/m(3) for helpers. When abrasive blasting was conducted in areas that apparently had reduced natural ventilation, dust exposures appeared to increase. When compared with other published data, this case study suggests that wet abrasive blasting causes less exposure to crystalline silica than dry abrasive blasting.

Study of Effect of Impacting Direction on Abrasive Nanometric Cutting Process with Molecular Dynamics.

PubMed

Li, Junye; Meng, Wenqing; Dong, Kun; Zhang, Xinming; Zhao, Weihong

2018-01-11

Abrasive flow polishing plays an important part in modern ultra-precision machining. Ultrafine particles suspended in the medium of abrasive flow removes the material in nanoscale. In this paper, three-dimensional molecular dynamics (MD) simulations are performed to investigate the effect of impacting direction on abrasive cutting process during abrasive flow polishing. The molecular dynamics simulation software Lammps was used to simulate the cutting of single crystal copper with SiC abrasive grains at different cutting angles (0 o -45 o ). At a constant friction coefficient, we found a direct relation between cutting angle and cutting force, which ultimately increases the number of dislocation during abrasive flow machining. Our theoretical study reveal that a small cutting angle is beneficial for improving surface quality and reducing internal defects in the workpiece. However, there is no obvious relationship between cutting angle and friction coefficient.

Lateral Structure Formation in Polyelectrolyte Brushes Induced by Multivalent Ions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brettmann, Blair; Pincus, Philip; Tirrell, Matthew

2017-01-13

We provide a theoretical model for the collapse of polyelectrolyte brushes in the presence of multivalent ions, focusing on the formation of lateral inhomogeneties in the collapsed state. Polyelectrolyte brushes are important in a variety of applications, including stabilizing colloidal particles and lubricating surfaces. Many uses rely on the extension of the densely grafted polymer chains from the surface in the extended brush morphology. In the presence Extended Brush of multivalent ions, brushes are significantly shorter than in monovalent ionic solutions, which greatly affects their properties. We base our theoretical analysis on an analogous collapse of polyelectrolyte brushes in amore » poor solvent, providing an energy balance representation for pinned micelles and cylindrical bundles. The equilibrium brush heights predicted for these structures are of a similar magnitude to those measured experimentally. The formation of lateral structures can open new avenues for stimuli-responsive applications that rely on nanoscale pattern formation on surfaces.« less

Synthesis and Biomedical Applications of Poly((meth)acrylic acid) Brushes.

PubMed

Qu, Zhenyuan; Xu, Hong; Gu, Hongchen

2015-07-15

Poly((meth)acrylic acid) (P(M)AA) brushes possess a number of distinctive properties that are particularly attractive for biomedical applications. This minireview summarizes recent advances in the synthesis and biomedical applications of P(M)AA brushes and brushes containing P(M)AA segments. First, we review different surface-initiated polymerization (SIP) methods, with a focus on recent progress in the surface-initiated controlled/living radical polymerization (SI-CLRP) techniques used to generate P(M)AA brushes with a tailored structure. Next, we discuss biomolecule immobilization methods for P(M)AA brushes, including physical adsorption, covalent binding, and affinity interactions. Finally, typical biomedical applications of P(M)AA brushes are reviewed, and their performance is discussed based on their unique properties. We conclude that P(M)AA brushes are promising biomaterials, and more potential biomedical applications are expected to emerge with the further development of synthetic techniques and increased understanding of their interactions with biological systems.

Antifouling Properties of Fluoropolymer Brushes toward Organic Polymers: The Influence of Composition, Thickness, Brush Architecture, and Annealing.

PubMed

Wang, Zhanhua; Zuilhof, Han

2016-07-05

Fluoropolymer brushes are widely used to prevent nonspecific adsorption of commercial polymeric or biological materials due to their strongly hydrophobic character. Herein, a series of fluoropolymer brushes with different compositions, thicknesses and molecular architectures was prepared via surface-initiated atom transfer radical polymerization (ATRP). Subsequently, the antifouling properties of these fluoropolymer brushes against organic polymers were studied in detail using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) measurements and polystyrene as a representative fouling polymer. Among all of the molecular architectures studied, homopolymerized methacrylate-based fluoropolymer brushes (PMAF17) show the best antifouling properties. Annealing the fluoropolymer brushes improves the antifouling property dramatically due to the reregulated surface composition. These fluoropolymer brushes can be combined with, e.g., micro- and nanostructuring and other advanced materials properties to yield even better long-term antifouling behavior under harsh environments.

Brush Seals for Improved Steam Turbine Performance

NASA Technical Reports Server (NTRS)

Turnquist, Norman; Chupp, Ray; Baily, Fred; Burnett, Mark; Rivas, Flor; Bowsher, Aaron; Crudgington, Peter

2006-01-01

GE Energy has retrofitted brush seals into more than 19 operating steam turbines. Brush seals offer superior leakage control compared to labyrinth seals, owing to their compliant nature and ability to maintain very tight clearances to the rotating shaft. Seal designs have been established for steam turbines ranging in size from 12 MW to over 1200 MW, including fossil, nuclear, combined-cycle and industrial applications. Steam turbines present unique design challenges that must be addressed to ensure that the potential performance benefits of brush seals are realized. Brush seals can have important effects on the overall turbine system that must be taken into account to assure reliable operation. Subscale rig tests are instrumental to understanding seal behavior under simulated steam-turbine operating conditions, prior to installing brush seals in the field. This presentation discusses the technical challenges of designing brush seals for steam turbines; subscale testing; performance benefits of brush seals; overall system effects; and field applications.

Aliasing Signal Separation of Superimposed Abrasive Debris Based on Degenerate Unmixing Estimation Technique

PubMed Central

Li, Tongyang; Wang, Shaoping; Zio, Enrico; Shi, Jian; Hong, Wei

2018-01-01

Leakage is the most important failure mode in aircraft hydraulic systems caused by wear and tear between friction pairs of components. The accurate detection of abrasive debris can reveal the wear condition and predict a system’s lifespan. The radial magnetic field (RMF)-based debris detection method provides an online solution for monitoring the wear condition intuitively, which potentially enables a more accurate diagnosis and prognosis on the aviation hydraulic system’s ongoing failures. To address the serious mixing of pipe abrasive debris, this paper focuses on the superimposed abrasive debris separation of an RMF abrasive sensor based on the degenerate unmixing estimation technique. Through accurately separating and calculating the morphology and amount of the abrasive debris, the RMF-based abrasive sensor can provide the system with wear trend and sizes estimation of the wear particles. A well-designed experiment was conducted and the result shows that the proposed method can effectively separate the mixed debris and give an accurate count of the debris based on RMF abrasive sensor detection. PMID:29543733

Study of Abrasive Wear Volume Map for PTFE and PTFE Composites

NASA Astrophysics Data System (ADS)

Unal, H.; Sen, U.; Mimaroglu, A.

2007-11-01

The potential of this work is based on consideration of wear volume map for the evaluation of abrasive wear performance of polytetrafluoroethylene (PTFE) and PTFE composites. The fillers used in the composite are 25% bronze, 35% graphite and 17% glass fibre glass (GFR). The influence of filler materials, abrasion surface roughness and applied load values on abrasive wear performance of PTFE and PTFE composites were studied and evaluated. Experimental abrasive wear tests were carried out at atmospheric condition on pin-on-disc wear tribometer. Tests were performed under 4, 6, 8 and 10 N load values, travelling speed of 1 m/sec and abrasion surface roughness values of 5, 20 and 45 µm. Wear volume maps were obtained and the results showed that the lowest wear volume rate for PTFE is reached using GFR filler. Furthermore, the results also showed that the higher is the applied load and the roughness of the abrasion surface, the higher is the wear rate. Finally it is also concluded that abrasive wear process mechanism include ploughing and cutting mechanisms.

Brush seal numerical simulation: Concepts and advances

NASA Technical Reports Server (NTRS)

Braun, M. J.; Kudriavtsev, V. V.

1994-01-01

The development of the brush seal is considered to be most promising among the advanced type seals that are presently in use in the high speed turbomachinery. The brush is usually mounted on the stationary portions of the engine and has direct contact with the rotating element, in the process of limiting the 'unwanted' leakage flows between stages, or various engine cavities. This type of sealing technology is providing high (in comparison with conventional seals) pressure drops due mainly to the high packing density (around 100 bristles/sq mm), and brush compliance with the rotor motions. In the design of modern aerospace turbomachinery leakage flows between the stages must be minimal, thus contributing to the higher efficiency of the engine. Use of the brush seal instead of the labyrinth seal reduces the leakage flow by one order of magnitude. Brush seals also have been found to enhance dynamic performance, cost less, and are lighter than labyrinth seals. Even though industrial brush seals have been successfully developed through extensive experimentation, there is no comprehensive numerical methodology for the design or prediction of their performance. The existing analytical/numerical approaches are based on bulk flow models and do not allow the investigation of the effects of brush morphology (bristle arrangement), or brushes arrangement (number of brushes, spacing between them), on the pressure drops and flow leakage. An increase in the brush seal efficiency is clearly a complex problem that is closely related to the brush geometry and arrangement, and can be solved most likely only by means of a numerically distributed model.

Voltage-induced swelling and deswelling of weak polybase brushes.

PubMed

Weir, Michael P; Heriot, Sasha Y; Martin, Simon J; Parnell, Andrew J; Holt, Stephen A; Webster, John R P; Jones, Richard A L

2011-09-06

We have investigated a novel method of remotely switching the conformation of a weak polybase brush using an applied voltage. Surface-grafted polyelectrolyte brushes exhibit rich responsive behavior and show great promise as "smart surfaces", but existing switching methods involve physically or chemically changing the solution in contact with the brush. In this study, high grafting density poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes were grown from silicon surfaces using atom transfer radical polymerization. Optical ellipsometry and neutron reflectivity were used to measure changes in the profiles of the brushes in response to DC voltages applied between the brush substrate and a parallel electrode some distance away in the surrounding liquid (water or D(2)O). Positive voltages were shown to cause swelling, while negative voltages in some cases caused deswelling. Neutron reflectometry experiments were carried out on the INTER reflectometer (ISIS, Rutherford Appleton Laboratory, UK) allowing time-resolved measurements of polymer brush structure. The PDMAEMA brushes were shown to have a polymer volume fraction profile described by a Gaussian-terminated parabola both in the equilibrium and in the partially swollen states. At very high positive voltages (in this study, positive bias means positive voltage to the brush-bearing substrate), the brush chains were shown to be stretched to an extent comparable to their contour length, before being physically removed from the interface. Voltage-induced swelling was shown to exhibit a wider range of brush swelling states in comparison to pH switching, with the additional advantages that the stimulus is remotely controlled and may be fully automated. © 2011 American Chemical Society

A switchable polymer layer: Chain folding in end-charged polymer brushes

NASA Astrophysics Data System (ADS)

Heine, David; Wu, David T.

2001-03-01

We use a self-consistent field approximation to model the configurations of end-charged homopolymer and block copolymer brushes in response to an external electric field due to charges on the grafting surface. By varying the charge density on the grafting surface, we can cause the chains either to extend outward, greatly increasing the brush height, or to loop back to the grafting surface. We show that such a copolymer brush can present one block at the exposed surface in the extended state and present the other block in the retracted state. This occurs for both a solvated brush and a dry brush. We also compare these results to those of a modified Alexander-de Gennes model for the end-charged homopolymer brush.

Macroscopic lateral heterogeneity observed in a laterally mobile immiscible mixed polyelectrolyte-neutral polymer brush

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Hoyoung; Tsouris, Vasilios; Lim, Yunho

We studied mixed poly(ethylene oxide) (PEO) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes. The question we attempted to answer was: when the chain grafting points are laterally mobile, how will this lateral mobility influence the structure and phase behavior of the mixed brush? Three different model mixed PEO/PDMAEMA brush systems were prepared: (1) a laterally mobile mixed brush by spreading onto the air–water interface a mixture of poly(ethylene oxide)–poly(n-butyl acrylate) (PEO–PnBA) and poly(2-(dimethylamino)ethyl methacrylate)–poly(n-butyl acrylate) (PDMAEMA–PnBA) diblock copolymers (the specific diblock copolymers used will be denoted as PEO 113–PnBA 100 and PDMAEMA 118–PnBA 100, where the subscripts refer to the number-average degreesmore » of polymerization of the individual blocks), (2) a mobility-restricted (inseparable) version of the above mixed brush prepared using a PEO–PnBA–PDMAEMA triblock copolymer (denoted as PEO 113–PnBA 89–PDMAEMA 120) having respective brush molecular weights matched with those of the diblock copolymers, and (3) a different laterally mobile mixed PEO and PDMAEMA brush prepared from a PEO 113–PnBA 100 and PDMAEMA 200–PnBA 103 diblock copolymer combination, which represents a further more height-mismatched mixed brush situation than described in (1). These three mixed brush systems were investigated by surface pressure–area isotherm and X-ray (XR) reflectivity measurements. These experimental data were analyzed within the theoretical framework of a continuum self-consistent field (SCF) polymer brush model. The combined experimental and theoretical results suggest that the mobile mixed brush derived using the PEO 113–PnBA 100 and PDMAEMA 118–PnBA 100 combination (i.e., mixed brush System #1) undergoes a lateral macroscopic phase separation at high chain grafting densities, whereas the more height-mismatched system (System #3) is only microscopically phase separated under comparable brush density conditions even though the lateral mobility of the grafted chains is unrestricted. The macroscopic phase separation observed in the laterally mobile mixed brush system is in contrast with the microphase separation behavior commonly observed in two-dimensional laterally mobile charged small molecule mixtures. Further study is needed to determine the detailed morphologies of the macro- and microphase-separated mixed PEO/PDMAEMA brushes.« less

Early response of ponderosa pine to spacing and brush: observations on a 12-year-old plantation

Treesearch

William W. Oliver

1979-01-01

Ponderosa pine (Pinus ponderosa Laws.) was planted at five different spacings, from 6 by 6 to 18 by 18 feet, on a productive site in northern California. Spacing and brush effects on tree growth were evaluated both on plots where brush was allowed to develop and on plots kept free of brush. Competition between trees in brush-free plots began during...

Nonlinearity in the rotational dynamics of Haidinger's brushes

NASA Astrophysics Data System (ADS)

Rothmayer, Mark; Dultz, Wolfgang; Frins, Erna; Zhan, Qiwen; Tierney, Dennis; Schmitzer, Heidrun

2007-10-01

Haidinger's brushes are an entoptic effect of the human visual system that enables us to detect polarized light. However, individual perceptions of Haidinger's brushes can vary significantly. We find that the birefringence of the cornea influences the rotational motion and the contrast of Haidinger's brushes and may offer an explanation for individual differences. We have devised an experimental setup to simulate various phase shifts of the cornea and found a switching effect in the rotational dynamics of Haidinger's brushes. In addition, age related macular degeneration reduces the polarization effect of the macula and thus also leads to changes in the brush pattern.

Behavioral Determinants of Brushing Young Children's Teeth: Implications for Anticipatory Guidance

PubMed Central

Huebner, Colleen E.; Riedy, Christine A.

2010-01-01

Purpose The purposes of this study were to identify parents' motivation, support, and barriers to twice daily tooth-brushing of infants and preschool-age children and to discover new approaches to encourage this important health behavior. Methods Qualitative interviews were conducted with 44 rural parents about tooth-brushing habits and experiences. Results Forty of 44 parents reported that they had begun to brush their child's teeth; 24 (55%) reported brushing twice a day or more. Parents who brushed twice a day, vs less often, were more likely to describe specific skills to overcome barriers; they expressed high self-efficacy and held high self-standards for brushing. Parents who brushed their children's teeth less than twice daily were more likely to: hold false beliefs about the benefits of twice daily tooth-brushing; report little normative pressure or social support for the behavior; have lower self-standards; describe more external constraints; and offer fewer ideas to overcome barriers. Conclusions The findings support an integrative framework in which barriers and support for parents' twice daily brushing of their young children's teeth are multiple and vary among individuals. Knowledge of behavioral determinants specific to individual parents could strengthen anticipatory guidance and recommendations about at-home oral hygiene of young children. PMID:20298653

Analysis of carbon fiber brush loading in anodes on startup and performance of microbial fuel cells

NASA Astrophysics Data System (ADS)

Hutchinson, Adam J.; Tokash, Justin C.; Logan, Bruce E.

Flat carbon anodes placed near a cathode in a microbial fuel cell (MFC) are adversely affected by oxygen crossover, but graphite fiber brush anodes placed near the cathode produce high power densities. The impact of the brush size and electrode spacing was examined by varying the distance of the brush end from the cathode and solution conductivity in multiple MFCs. The startup time was increased from 8 ± 1 days with full brushes (all buffer concentrations) to 13 days (50 mM), 14 days (25 mM) and 21 days (8 mM) when 75% of the brush anode was removed. When MFCs were all first acclimated with a full brush, up to 65% of the brush material could be removed without appreciably altering maximum power. Electrochemical impedance spectroscopy (EIS) showed that the main source of internal resistance (IR) was diffusion resistance, which together with solution resistance reached 100 Ω. The IR using EIS compared well with that obtained using the polarization data slope method, indicating no major components of IR were missed. These results show that using full brush anodes avoids adverse effects of oxygen crossover during startup, although brushes are much larger than needed to sustain high power.

Wear resistance and mechanisms of composite hardfacings at abrasive impact erosion wear

NASA Astrophysics Data System (ADS)

Surzhenkov, A.; Viljus, M.; Simson, T.; Tarbe, R.; Saarna, M.; Casesnoves, F.

2017-05-01

Tungsten carbide based hardmetal containing sprayed and melted composite hardfacings are prospective for protection against abrasive wear. For selection of abrasive wear resistant hardfacings under intensive impact wear conditions, both mechanical properties (hardness, fracture toughness, etc.) and abrasive wear conditions (type of abrasive, impact velocity, etc.) should be considered. This study focuses on the wear (wear rate and mechanisms) of thick metal-matrix composite hardfacings with hardmetal (WC-Co) reinforcement produced by powder metallurgy technology. The influence of the hardmetal reinforcement type on the wear resistance at different abrasive impact erosion wear (AIEW) conditions was studied. An optimal reinforcement for various wear conditions is described. Based on wear mechanism studies, a mathematical model for wear prediction was drafted.

Schoolchildren's tooth brushing characteristics and oral hygiene habits assessed with video-recorded sessions at school and a questionnaire.

PubMed

Martignon, Stefania; González, María Clara; Tellez, Marisol; Guzmán, Adriana; Quintero, Ingrid K; Sáenz, Viviana; Martínez, Miguel; Mora, Angelica; Espinosa, Luis Fernando; Castiblanco, Gina A

2012-01-01

Tooth brushing habits become established during the first years of childhood and last throughout lifetime. To assess tooth-brushing characteristics, the procedure was videotaped at school and a questionnaire on oral hygiene knowledge, attitudes and practices was completed. A total 146 5- to 8-year-old low-SES schoolchildren from Bogotá participated. The median total tooth brushing time was 115 sec (75% Q3-178 sec; 25% Q1-83 sec). The median time the toothbrush was in the child's mouth was 89 sec (75% Q3-145 sec; 25% Q1-65 sec). Most children brushed their maxillary (97%), mandibular (95%), anterior (96%) and posterior (81%) teeth. The surfaces most often brushed were the buccal-anterior-maxillary (96%) and mandibular (94%) surfaces. The amount of toothpaste dispensed was 2/3 of toothbrush head in 51% of children. Most children spat (93%), used the mirror (78%), and rinsed their mouth (72%). The majority (97%) was confident that the toothbrushing session was effective. The questionnaire revealed the following: none of the children brush their teeth at school; only 34% is supervised by an adult during the tooth brushing procedure, and only 30% brush twice a day. The study shows overall positive findings of tooth brushing while being observed, in terms of time and use of toothpaste. These results, together with the poor oral-health status and toothbrushing habits reported at home, highly recommend incorporating daily-supervised school-based tooth brushing sessions with fluoride toothpaste.

Frequency of daily tooth brushing: predictors of change in 9- to 11-year old US children.

PubMed

Polk, D E; Geng, M; Levy, S; Koerber, A; Flay, B R

2014-09-01

To investigate whether an increase in daily tooth brushing frequency in children was predicted by either a) having a strong intention to brush twice a day or b) their parents receiving information about their new caries experience. Secondary data analyses were conducted on two waves of data from the Aban Aya Youth Project and the Iowa Fluoride Study. The Aban Aya study included 576 10- and 11-year olds from Chicago, Illinois. The Iowa Fluoride Study included a convenience sample of 709 babies born in Iowa. The present study includes those children at age 9. In both studies, reported daily tooth brushing frequency was assessed twice six months apart. In the Aban Aya data, compared with children with a weak intention at wave 1 to brush twice a day, children with a strong intention to brush twice a day were more likely to increase their brushing frequency by wave 2, OR 7.0, 95%CI 1.5,32.9. In the Iowa Fluoride Study, compared with children who did not have new caries at wave 1, children who had new caries experience were less likely to increase their brushing frequency by wave 2, OR 0.4, 95%CI 0.2,0.9. Strengthening intention to brush twice a day might increase children's brushing frequency. However, simply providing parents with information about new caries probably will not. Future studies should assess tooth brushing frequency, habit strength, intention, and situational cues at closely-spaced waves.

The effect of brushing with toothpaste containing nano calcium carbonate upon nanofill composite resin surface roughness

NASA Astrophysics Data System (ADS)

Ramadhani, A. M.; Herda, E.; Triaminingsih, S.

2017-08-01

This study aims to determine the effect of brushing with toothpaste containing nanocalcium carbonate on the roughness of nanofill composite resin surface. Brushing was conducted with 3 types of materials for 3 consecutive brushing periods of 10 minutes each. Surface roughness was measured using a surface-roughness tester and the results were analyzed using the repeated ANOVA and the one-way ANOVA test. The surface morphology was observed using SEM after 3 months’ worth of brushing with the 3 materials. It was found that the nanofill composite resin surface-roughness value increased significantly (p<0.005) after brushing with toothpaste containing nano calcium carbonate for 3 months, but the value was not as high as that obtained when brushing with other types of toothpaste.

[Clinical relevance of tooth brushing in relation to dental caries].

PubMed

Pita-Fernández, Salvador; Pombo-Sánchez, Antonio; Suárez-Quintanilla, Juan; Novio-Mallón, Silvia; Rivas-Mundiña, Berta; Pértega-Díaz, Sonia

2010-07-01

To determine the impact and clinical relevance of tooth brushing on oral health. Prevalence study. Fontiñas Health Centre. (Santiago de Compostela, Spain). Prevalence study (n=281 children aged 5-14 years. Odontological examination according to WHO methodology, to determine the frequency of tooth brushing, frequency of sweet consumption and their impact on the prevalence of caries. Logistic regression and estimation of the relative prevalence difference (RPD) and the Number Needed to Treat in order to prevent one additional bad outcome (NNT). The children who never brush their teeth have a 40% (95% CI: 24.3%-57.8%) of early caries, while those who brush their teeth several times a day have 15.3% (95% CI: 9.4%-23.7%). An association between not brushing the teeth and caries in primary teeth (OR=2.3; 95% CI:1.05-5.3) was observed after adjusting for age, sweet consumption and visits to the dentist. The same occurred with final teeth (OR=3.9; 95% CI:1.4-10.3). The RPD was 62%(95% CI: 30%-79%), meaning that prevalence of caries is 62% lower in children who brush their teeth several times a day as compared to those who never brush their teeth. The NNT is 4 (95% CI: 2.4-14), so for every 4 children who brush their teeth several times a day, there is one less case of caries, compared to those who never brush their teeth. There is a dose-response relationship between prevalence of caries and brushing frequency. The same effect was observed with definitive caries: RPD=55% (95% CI:16%-76%), NNT=5 (95% CI:2.8-53.3). Tooth brushing is related to oral health, with a major clinical impact. The positive effect of tooth brushing was superior to that of a correct diet. 2009 Elsevier España, S.L. All rights reserved.

New Rock Abrasivity Test Method for Tool Life Assessments on Hard Rock Tunnel Boring: The Rolling Indentation Abrasion Test (RIAT)

NASA Astrophysics Data System (ADS)

Macias, F. J.; Dahl, F.; Bruland, A.

2016-05-01

The tunnel boring machine (TBM) method has become widely used and is currently an important presence within the tunnelling industry. Large investments and high geological risk are involved using TBMs, and disc cutter consumption has a great influence on performance and cost, especially in hard rock conditions. Furthermore, reliable cutter life assessments facilitate the control of risk as well as avoiding delays and budget overruns. Since abrasive wear is the most common process affecting cutter consumption, good laboratory tests for rock abrasivity assessments are needed. A new abrasivity test method by rolling disc named Rolling Indentation Abrasion Test (RIAT) has been developed. The goal of the new test design and procedure is to reproduce wear behaviour on hard rock tunnel boring in a more realistic way than the traditionally used methods. Wear by rolling contact on intact rock samples is introduced and several rock types, covering a wide rock abrasiveness range, have been tested by RIAT. The RIAT procedure indicates a great ability of the testing method to assess abrasive wear on rolling discs. In addition and to evaluate the newly developed RIAT test method, a comprehensive laboratory testing programme including the most commonly used abrasivity test methods and the mineral composition were carried out. Relationships between the achieved results from conventional testing and RIAT results have been analysed.

Development of a two-body wet abrasion test method with attention to the effects of reused abradant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blau, Peter Julian; Dehoff, Ryan R

2012-01-01

Abrasive wear is among the most common and costliest causes for material wastage, and it occurs in many forms. A simple method has been developed to quantify the response of metals and alloys to two-body wet abrasion. A metallographic polishing machine was modified to create a disk-on-flat sliding test rig. Adhesive-backed SiC grinding papers were used under fixed load and speed to rank the abrasive wear of seven alloy steels, some of which are candidates for drill cones for geothermal drilling. Standardized two-body abrasion tests, like those described in ASTM G132, feed unused abrasive into the contact; however, the currentmore » work investigated whether useful rankings could still be obtained with a simpler testing configuration in which specimens repeatedly slide on the same wear path under water-lubricated conditions. Tests using abrasive grit sizes of 120 and 180 resulted in the same relative ranking of the alloys although the coarser grit produced more total wear. Wear decreased when the same abrasive disk was re-used for up to five runs, but the relative rankings of the steels remained the same. This procedure was presented to ASTM Committee G2 on Wear and Erosion as a potential standard test for wet two-body abrasive wear.« less

Abrasive wear of ceramic wear protection at ambient and high temperatures

NASA Astrophysics Data System (ADS)

Varga, M.; Adam, K.; Tumma, M.; Alessio, K. O.

2017-05-01

Ceramic wear protection is often applied in abrasive conditions due to their excellent wear resistance. This is especially necessary in heavy industries conveying large amounts of raw materials, e.g. in steel industry. Some plants also require material transport at high temperatures and velocities, making the need of temperature stable and abrasion resistant wear protection necessary. Various types and wear behaviour of ceramic protection are known. Hence, the goal of this study is to identify the best suitable ceramic materials for abrasive conditions in harsh environments at temperatures up to 950°C and severe thermal gradients. Chamottes, known for their excellent thermal shock resistance are compared to high abrasion resistant ceramic wear tiles and a cost efficient cement-bounded hard compound. Testing was done under high-stress three-body abrasion regime with a modified ASTM G65 apparatus enabling for investigations up to ~950°C. Thereto heated abrasive is introduced into the wear track and also preheated ceramic samples were used and compared to ambient temperature experiments. Results indicate a significant temperature influence on chamottes and the hard compound. While the chamottes benefit from temperature increase, the cement-bounded hard compound showed its limitation at abrasive temperatures of 950°C. The high abrasion resistant wear tiles represented the materials with the best wear resistance and less temperature influence in the investigated range.

Modeling of Micro Deval abrasion loss based on some rock properties

NASA Astrophysics Data System (ADS)

Capik, Mehmet; Yilmaz, Ali Osman

2017-10-01

Aggregate is one of the most widely used construction material. The quality of the aggregate is determined using some testing methods. Among these methods, the Micro Deval Abrasion Loss (MDAL) test is commonly used for the determination of the quality and the abrasion resistance of aggregate. The main objective of this study is to develop models for the prediction of MDAL from rock properties, including uniaxial compressive strength, Brazilian tensile strength, point load index, Schmidt rebound hardness, apparent porosity, void ratio Cerchar abrasivity index and Bohme abrasion test are examined. Additionally, the MDAL is modeled using simple regression analysis and multiple linear regression analysis based on the rock properties. The study shows that the MDAL decreases with the increase of uniaxial compressive strength, Brazilian tensile strength, point load index, Schmidt rebound hardness and Cerchar abrasivity index. It is also concluded that the MDAL increases with the increase of apparent porosity, void ratio and Bohme abrasion test. The modeling results show that the models based on Bohme abrasion test and L type Schmidt rebound hardness give the better forecasting performances for the MDAL. More models, including the uniaxial compressive strength, the apparent porosity and Cerchar abrasivity index, are developed for the rapid estimation of the MDAL of the rocks. The developed models were verified by statistical tests. Additionally, it can be stated that the proposed models can be used as a forecasting for aggregate quality.

``Smart'' Surfaces of Polymer Brushes

NASA Astrophysics Data System (ADS)

Wang, Qiang; Meng, Dong

2009-03-01

``Smart'' surfaces, also known as stimuli-responsive surfaces, can change their properties (e.g., wettability, adhesion, friction, elasticity, and biocompatibility) in response to external stimuli (e.g., temperature, pressure, light, solvent selectivity, ionic strength, type of salt, pH, applied electric field, etc.). In this work, we use numerical self-consistent field calculations to study in detail the structure and stimuli- responses of various polymer brushes, including (1) the thermo- response of PNIPAM brushes in water, (2) solvent-response of uncharged diblock copolymer brushes, and (3) the stimuli- response of charged two-component polymer brushes (including both the binary A/B brushes and diblock copolymer A-B brushes) to ionic strength, pH, and applied electric field. Among the many design parameters (e.g., chain lengths, grafting densities, A-B incompatibility, degree of ionization of charged polymers, etc.) we identify those that strongly affect the surface switchability. Such knowledge is useful to the experimental design of these smart polymer brushes for their applications.

Comparing solvophobic and multivalent induced collapse in polyelectrolyte brushes

DOE PAGES

Jackson, Nicholas E.; Brettmann, Blair K.; Vishwanath, Venkatram; ...

2017-02-03

Here, coarse-grained molecular dynamics enhanced by free-energy sampling methods is used to examine the roles of solvophobicity and multivalent salts on polyelectrolyte brush collapse. Specifically, we demonstrate that while ostensibly similar, solvophobic collapsed brushes and multivalent-ion collapsed brushes exhibit distinct mechanistic and structural features. Notably, multivalent-induced heterogeneous brush collapse is observed under good solvent polymer backbone conditions, demonstrating that the mechanism of multivalent collapse is not contingent upon a solvophobic backbone. Umbrella sampling of the potential of mean-force (PMF) between two individual brush strands confirms this analysis, revealing starkly different PMFs under solvophobic and multivalent conditions, suggesting the role ofmore » multivalent “bridging” as the discriminating feature in trivalent collapse. Structurally, multivalent ions show a propensity for nucleating order within collapsed brushes, whereas poor-solvent collapsed brushes are more disordered; this difference is traced to the existence of a metastable PMF minimum for poor solvent conditions, and a global PMF minimum for trivalent systems, under experimentally relevant conditions.« less

Comparing solvophobic and multivalent induced collapse in polyelectrolyte brushes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jackson, Nicholas E.; Brettmann, Blair K.; Vishwanath, Venkatram

Here, coarse-grained molecular dynamics enhanced by free-energy sampling methods is used to examine the roles of solvophobicity and multivalent salts on polyelectrolyte brush collapse. Specifically, we demonstrate that while ostensibly similar, solvophobic collapsed brushes and multivalent-ion collapsed brushes exhibit distinct mechanistic and structural features. Notably, multivalent-induced heterogeneous brush collapse is observed under good solvent polymer backbone conditions, demonstrating that the mechanism of multivalent collapse is not contingent upon a solvophobic backbone. Umbrella sampling of the potential of mean-force (PMF) between two individual brush strands confirms this analysis, revealing starkly different PMFs under solvophobic and multivalent conditions, suggesting the role ofmore » multivalent “bridging” as the discriminating feature in trivalent collapse. Structurally, multivalent ions show a propensity for nucleating order within collapsed brushes, whereas poor-solvent collapsed brushes are more disordered; this difference is traced to the existence of a metastable PMF minimum for poor solvent conditions, and a global PMF minimum for trivalent systems, under experimentally relevant conditions.« less

Repetitive switching for an electromagnetic rail gun

NASA Astrophysics Data System (ADS)

Gruden, J. M.

1983-12-01

Previous testing on a repetitive opening switch for inductive energy storage has proved the feasibility of the rotary switch concept. The concept consists of a rotating copper disk (rotor) with a pie-shaped insulator section and brushes which slide along each of the rotor surfaces. While on top of the copper surface, the brushes and rotor conduct current allowing the energy storage inductor to charge. When the brushes slide onto the insulator section, the current cannot pass through the rotor and is diverted into the load. This study investigates two new brush designs and a rotor modification designed to improve the current commutating capabilities of the switch. One brush design (fringe fiber) employs carbon fibers on the leading and trailing edge of the brush to increase the resistive commutating action as the switch opens and closes. The other brush design uses fingers to conduct current to the rotor surface, effectively increasing the number of brush contact points. The rotor modification was the placement of tungsten inserts at the copper-insulator interfaces.

Characterization of fine abrasive particles for optical fabrication

NASA Astrophysics Data System (ADS)

Funkenbusch, Paul D.; Zhou, Y. Y.; Takahashi, Toshio; Quesnel, David J.; Lambropoulos, John C.

1995-08-01

Material removal during fine grinding operations is accomplished primarily by the action of individual abrasive particles on the glass surface. The mechanical properties of the abrasive are therefore important. Unfortunately it is difficult to directly measure the mechanical response of abrasives once they reach the scale of approximately 10 microns. As a result mechanical properties of fine abrasives are sometimes characterized in terms of an empirical `friability', based on the response of the abrasive to crushing by a metal ball in a vial. In this paper we report on modeling/experiments designed to more precisely quantify the mechanical properties of fine abrasives and ultimately to relate them to the conditions experienced by bound particles during grinding. Experiments have been performed on various types and sizes of diamond abrasives. The response of the particles is a strong function of the loading conditions and can be tracked by changing the testing parameters. Diamond size is also found to play a critical role, with finer diamonds less susceptible to fracture. A micromechanical model from the literature is employed estimate the forces likely to be seen during testing. We are also developing dynamic models to better predict the forces experienced during `friability' testing as a function of the testing parameters.

AFM-based force spectroscopy on polystyrene brushes: effect of brush thickness on protein adsorption.

PubMed

Hentschel, Carsten; Wagner, Hendrik; Smiatek, Jens; Heuer, Andreas; Fuchs, Harald; Zhang, Xi; Studer, Armido; Chi, Lifeng

2013-02-12

Herein we present a study on nonspecific binding of proteins at highly dense packed hydrophobic polystyrene brushes. In this context, an atomic force microscopy tip was functionalized with concanavalin A to perform single-molecule force spectroscopy measurements on polystyrene brushes with thicknesses of 10 and 60 nm, respectively. Polystyrene brushes with thickness of 10 nm show an almost two times stronger protein adsorption than brushes with a thickness of 60 nm: 72 pN for the thinner and 38 pN for the thicker layer, which is in qualitative agreement with protein adsorption studies conducted macroscopically by fluorescence microscopy.

Design optimization of a brush turbine with a cleaner/water based solution

NASA Technical Reports Server (NTRS)

Kim, Rhyn H.

1995-01-01

Recently, a turbine-brush was analyzed based on the energy conservation and the force momentum equation with an empirical relationship of the drag coefficient. An equation was derived to predict the rotational speed of the turbine-brush in terms of the blade angle, number of blades, rest of geometries of the turbine-brush and the incoming velocity. Using the observed flow conditions, drag coefficients were determined. Based on the experimental values as boundary conditions, the turbine-brush flows were numerically simulated to understand first the nature of the flows, and to extend the observed drag coefficient to a flow without holding the turbine-brush.

Synthesis and characterization of poly(3-sulfopropylmethacrylate) brushes for potential antibacterial applications.

PubMed

Ramstedt, Madeleine; Cheng, Nan; Azzaroni, Omar; Mossialos, Dimitris; Mathieu, Hans Jörg; Huck, Wilhelm T S

2007-03-13

This article describes the aqueous atom transfer radical polymerization synthesis of poly(3-sulfopropylmethacrylate) brushes onto gold and Si/SiO2 surfaces in a controlled manner. The effect of Cu(I)/Cu(II) ratio was examined, and a quartz crystal microbalance was used to study the kinetics of the brush synthesis. The synthesized brushes displayed a thickness from a few nanometers to several hundred nanometers and were characterized using atomic force microscopy, ellipsometry, Fourier transform infrared spectroscopy (FTIR), contact angle measurements, and X-ray photoelectron spectroscopy (XPS). The as-synthesized sulfonate brushes had very good ion-exchange properties for the ions tested in this study, i.e., Na+, K+, Cu2+, and Ag+. FTIR and XPS show that the metal ions are coordinating to sulfonate moieties inside the brushes. The brushes were easily loaded with silver ions, and the effect of silver ion concentration on silver loading of the brush was examined. The silver-loaded brushes were shown to be antibacterial toward both gram negative and gram positive bacteria. The silver leaching was studied through leaching experiments into water, NaNO3, and NaCl (physiological medium). The results from these leaching experiments are compared and discussed in the article.

Distribution of Chains in Polymer Brushes Produced by a “Grafting From” Mechanism

DOE PAGES

Martinez, Andre P.; Carrillo, Jan-Michael Y.; Dobrynin, Andrey V.; ...

2016-01-11

The molecular weight and polydispersity of the chains in a polymer brush are critical parameters determining the brush properties. However, the characterization of polymer brushes is hindered by the vanishingly small mass of polymer present in brush layers. In this study, in order to obtain sufficient quantities of polymer for analysis, polymer brushes were grown from high surface area fibrous nylon membranes by ATRP. We synthesized the brushes with varying surface initiator densities, polymerization times, and amounts of sacrificial initiator, then cleaved from the substrate, and analyzed by GPC and NMR. Characterization showed that the surface-grown polymer chains were moremore » polydisperse and had lower average molecular weight compared to solution-grown polymers synthesized concurrently. Furthermore, the molecular weight distribution of the polymer brushes was observed to be bimodal, with a low molecular weight population of chains representing a significant mass fraction of the polymer chains at high surface initiator densities. Moreover, the origin of this low MW polymer fraction is proposed to be the termination of growing chains by recombination during the early stages of polymerization, a mechanism confirmed by molecular dynamics simulations of brush polymerization.« less

Comparison of Saudi child versus parent-report of child tooth-brushing practices.

PubMed

Salama, F; Abobakr, I; Al-Khodair, N; Al-Wakeel, M

2016-01-01

This cross-sectional study compared Saudi children's tooth-brushing practices as reported by children and parents and then matched the agreement of reports. A sample of 100 Saudi parents and their children of ages 8-12 years participated in this cross-sectional investigation. A self-administered structured questionnaire regarding the current tooth-brushing practice and habits at home was filled by the child. The same questionnaire was filled independently by parents. Mothers were more likely to teach children about tooth-brushing and fathers were minimally helping children during tooth-brushing. Mothers were the first to teach the children and approximately 33% of the children started brushing their teeth by age 5. Children and parents reported that children clean their teeth using a tooth-brush (73.74% and 76.77%), miswak (5.05% and 5.05%), or both (21.21% and 18.18%), respectively. There was some agreement between reported tooth-brushing practice of children and their parents. It is important to question both the child and parent regarding oral hygiene practice and compare their answers to get more broad knowledge about their practices. Approximately, one-third of the children started brushing their teeth by age 5, which differs from recommended oral hygiene practices.

The efficacy of oral brush biopsy with computer-assisted analysis in identifying precancerous and cancerous lesions

PubMed Central

2011-01-01

Background Cancer of the oral cavity is the sixth most common malignancy reported worldwide and one with the highest mortality rate among all malignancies. There is a paucity of reliable diagnostic methods to detect early malignancies. This study was performed to evaluate the sensitivity and specificity of brush biopsy in identifying oral premalignant and malignant lesions. Methods Oral brush and scalpel biopsies were performed on 85 consecutive patients presenting with an oral lesion deemed to be minimally suspicious by clinical examination and the results were compared. Results Of 79 patients with adequate brush biopsy samples with matching scalpel biopsies, 27 revealed histopathologic evidence of dysplasia or carcinoma, 26 of which were independently identified with the oral brush biopsy (sensitivity: 96.3% - 95% CI, 87%-100%). 52 oral lesions did not reveal any histopathologic evidence of dysplasia or carcinoma and of these, brush biopsy reported 47 as "negative" and 5 as "atypical"(specificity of "positive" brush biopsy result is 100%- 95% CI, 93%-100%; specificity for "atypical" brush biopsy result is 90.4%- 95% CI, 82%-97%. The positive predictive value of an abnormal oral brush biopsy was 84% and the negative predictive value was 98%. Conclusion Our study demonstrated that the oral brush biopsy is an accurate test in identifying oral premalignant and malignant lesions, even if minimally suspicious. PMID:21864339

Effects of carbon brush anode size and loading on microbial fuel cell performance in batch and continuous mode

NASA Astrophysics Data System (ADS)

Lanas, Vanessa; Ahn, Yongtae; Logan, Bruce E.

2014-02-01

Larger scale microbial fuel cells (MFCs) require compact architectures to efficiently treat wastewater. We examined how anode-brush diameter, number of anodes, and electrode spacing affected the performance of the MFCs operated in fed-batch and continuous flow mode. All anodes were initially tested with the brush core set at the same distance from the cathode. In fed-batch mode, the configuration with three larger brushes (25 mm diameter) produced 80% more power (1240 mW m-2) than reactors with eight smaller brushes (8 mm) (690 mW m-2). The higher power production by the larger brushes was due to more negative and stable anode potentials than the smaller brushes. The same general result was obtained in continuous flow operation, although power densities were reduced. However, by moving the center of the smaller brushes closer to the cathode (from 16.5 to 8 mm), power substantially increased from 690 to 1030 mW m-2 in fed batch mode. In continuous flow mode, power increased from 280 to 1020 mW m-2, resulting in more power production from the smaller brushes than the larger brushes (540 mW m-2). These results show that multi-electrode MFCs can be optimized by selecting smaller anodes, placed as close as possible to the cathode.

Clinical validation of robot simulation of toothbrushing - comparative plaque removal efficacy

PubMed Central

2014-01-01

Background Clinical validation of laboratory toothbrushing tests has important advantages. It was, therefore, the aim to demonstrate correlation of tooth cleaning efficiency of a new robot brushing simulation technique with clinical plaque removal. Methods Clinical programme: 27 subjects received dental cleaning prior to 3-day-plaque-regrowth-interval. Plaque was stained, photographically documented and scored using planimetrical index. Subjects brushed teeth 33–47 with three techniques (horizontal, rotating, vertical), each for 20s buccally and for 20s orally in 3 consecutive intervals. The force was calibrated, the brushing technique was video supported. Two different brushes were randomly assigned to the subject. Robot programme: Clinical brushing programmes were transfered to a 6-axis-robot. Artificial teeth 33–47 were covered with plaque-simulating substrate. All brushing techniques were repeated 7 times, results were scored according to clinical planimetry. All data underwent statistical analysis by t-test, U-test and multivariate analysis. Results The individual clinical cleaning patterns are well reproduced by the robot programmes. Differences in plaque removal are statistically significant for the two brushes, reproduced in clinical and robot data. Multivariate analysis confirms the higher cleaning efficiency for anterior teeth and for the buccal sites. Conclusions The robot tooth brushing simulation programme showed good correlation with clinically standardized tooth brushing. This new robot brushing simulation programme can be used for rapid, reproducible laboratory testing of tooth cleaning. PMID:24996973

Use of a disclosed plaque visualization technique improved the self-performed, tooth brushing ability of primary schoolchildren.

PubMed

Chounchaisithi, Napa; Santiwong, Busayarat; Sutthavong, Sirikarn; Asvanit, Pompun

2014-02-01

Disclosing agents have a long history of use as an aid in children's tooth brushing instruction. However, their benefit when used to improve self-performed tooth brushing ability without any tooth brushing instruction has not been investigated. To evaluate the effect of disclosed plaque visualization on improving the self-performed, tooth brushing ability of primary school children. A cluster-randomized, crossover study was conducted in Nakhon Nayok province, Thailand. A total of 122 second-grade schoolchildren, aged 8-10 years old, from 12 schools were randomly divided into 2 groups. The first group was assigned to brush with disclosed plaque visualization, while the other group brushed without disclosed plaque visualization. One month later the groups switched procedures. Tooth brushing ability was evaluated by the subjects' reduction in patient hygiene performance (PHP) scores. The data were analyzed using repeated-measures analysis of variance, with significance set at p<0.05. Disclosed plaque visualization had a significant effect on improving the children's self-performed, tooth brushing ability in all areas of the mouth (p<0.001), particularly for anterior teeth, mandibular teeth, buccal surfaces, and areas adjacent to the gingival margin (p<0.001). Disclosed plaque visualization is a viable technique to improve children's self-performed tooth brushing ability, and could be used in school-based oral health promotion programs.

Clinical validation of robot simulation of toothbrushing--comparative plaque removal efficacy.

PubMed

Lang, Tomas; Staufer, Sebastian; Jennes, Barbara; Gaengler, Peter

2014-07-04

Clinical validation of laboratory toothbrushing tests has important advantages. It was, therefore, the aim to demonstrate correlation of tooth cleaning efficiency of a new robot brushing simulation technique with clinical plaque removal. Clinical programme: 27 subjects received dental cleaning prior to 3-day-plaque-regrowth-interval. Plaque was stained, photographically documented and scored using planimetrical index. Subjects brushed teeth 33-47 with three techniques (horizontal, rotating, vertical), each for 20s buccally and for 20s orally in 3 consecutive intervals. The force was calibrated, the brushing technique was video supported. Two different brushes were randomly assigned to the subject. Robot programme: Clinical brushing programmes were transfered to a 6-axis-robot. Artificial teeth 33-47 were covered with plaque-simulating substrate. All brushing techniques were repeated 7 times, results were scored according to clinical planimetry. All data underwent statistical analysis by t-test, U-test and multivariate analysis. The individual clinical cleaning patterns are well reproduced by the robot programmes. Differences in plaque removal are statistically significant for the two brushes, reproduced in clinical and robot data. Multivariate analysis confirms the higher cleaning efficiency for anterior teeth and for the buccal sites. The robot tooth brushing simulation programme showed good correlation with clinically standardized tooth brushing.This new robot brushing simulation programme can be used for rapid, reproducible laboratory testing of tooth cleaning.

Polymer Brushes Containing Sulfonated Sugar Repeat Units: Synthesis, Characterization and In Vitro Testing of Blood Coagulation Activation

PubMed Central

Ayres, N.; Holt, D. J.; Jones, C.F.; Corum, L. E.; Grainger, D. W.

2009-01-01

A new polymer brush chemistry containing sulfonated carbohydrate repeat units has been synthesized from silicon substrates using ATRP methods and characterized both in bulk and using surface analysis. The polymer brush was designed to act as a mimic for the naturally occurring sulfonated glycosaminoglycan, heparin, commonly used for modifying blood-contacting surfaces both in vitro and in vivo. Surface analysis showed conversion of brush saccharide precursor chemistry to the desired sulfonated polymer product. The sulfonated polymer brush surface was further analyzed using three conventional in vitro tests for blood compatibility -- plasma recalcification times, complement activation, and thrombin generation. The sulfonated polymer brush films on silicon oxide wafers exhibited better assay performance in these blood component assays than the unsulfonated sugar functionalized polymer brush in all tests performed. PMID:19859552

Methylation analysis of CMTM3 and DUSP1 gene promoters in high-quality brush hair in the Yangtze River delta white goat.

PubMed

Qiang, Wang; Guo, Haiyan; Li, Yongjun; Shi, Jianfei; Yin, Xiuyuan; Qu, Jingwen

2018-08-20

The Yangtze River delta white goat is the only goat breed that produces high-quality brush hair, which is specifically used in top-grade writing brushes. Previous studies have indicated that the CMTM3 and DUSP1 genes are involved in the growth and cycle of high-quality brush hair, and these genes are thought to be involved in the formation of high-quality brush hair traits. In this study, we investigated the relationship between methylation of CMTM3 and DUSP1 and such traits. The results indicated that the relative expression levels of the CMTM3 and DUSP1 genes were higher in non-high-quality brush hair than in high-quality brush hair. Furthermore, the CpG sites of the DUSP1 gene were not methylated, and the methylation level of CMTM3 was negatively correlated with the gene expression level. We believe that the DUSP1 gene regulates the formation of high-quality brush hair by non-methylated, and that methylation of the CMTM3 gene results in a decrease in its expression, causing an increase in the activity of the androgen receptor and the level of androgen. This high androgen level promotes the growth of high-quality brush hair. These study results provide a theoretical basis for further elucidating the molecular mechanism of the formation of high-quality brush hair characteristics, and provide scientific reference for the molecular breeding of high-quality brush hair. Copyright © 2018 Elsevier B.V. All rights reserved.

Attitudes and behavioural factors relating to toothbrushing and the use of fluoride toothpaste among caries-active Swedish adolescents - a questionnaire study.

PubMed

Nordström, Anna; Birkhed, Dowen

2017-10-01

The aim of this study was to identify attitudes and behaviour relating to fluoride toothpaste and toothbrushing habits among caries-active Swedish adolescents. This cross-sectional study is based on an earlier clinical, two-year toothpaste intervention study. At the last appointment, 206 adolescents (of 211) answered a questionnaire comprising nine semi-closed questions. The majority (93%) brushed their teeth every day, while 7% did so only occasionally. Most participants (77%) brushed twice a day, while 12% brushed just once a day. About half of those brushing just once a day forgot to brush in the evening. Similarly, more than half of the adolescents (53%) used 1 cm of toothpaste or less on their toothbrush. Moreover, 49% brushed for less than 2 min, 41% brushed for 2 min and 10% for more than 2 min. The majority (73%) rinsed with water after toothbrushing. A difference between boys and girls was also observed; 87% of the girls brushed twice a day, whereas only 67% of the boys did so and boys more frequently forgot in the evening. Attitudes and behaviour relating to fluoride toothpaste and toothbrushing habits among caries-active Swedish adolescents are still inadequate after two years of toothpaste intervention. There are several areas where improvements can be made, such as frequency of brushing, brushing time, amount of toothpaste and post-brushing procedures. The majority (81%) included 'fresh breath' as a reason for performing oral hygiene and this aspect can be used by dental staff in health promotion.

Effectiveness of Plaque Control with Novel Pediatric Oral Hygiene Need Station (Modified Oral Irrigation Device) as Compared with Manual Brushing and Flossing: Randomized Controlled Pilot Trial.

PubMed

Murthy, Prashanth Sadashiva; Shaik, Naseemoon; Deshmukh, Seema; Girish, M S

2018-01-01

Establishing good hygiene habits are valuable for present and future oral health. Below 6 years, tooth brushing should be performed by parents, as increasing dexterity and cognition may permit supervised brushing until the child is capable of independent brushing. The aim of the present study was to evaluate the effectiveness of modified oral irrigation device in children in terms of plaque control and to compare the effectiveness of plaque control with manual brushing with the modified oral irrigation device in children. A randomized clinical trial was performed on 12 subjects who were allocated to the two study groups. After obtaining the consent, the control group was instructed tooth brushing with regular pediatric commercially available toothbrush and the intervention group with modified oral irrigation device. Plaque scores in both groups were assessed pre- and post-brushing using modified navy plaque index. The data were subjected to Descriptive statistics and Paired t -test using SPSS version 22. Intragroup comparison of mean difference of plaque score in control group and intervention group pre- and post-brushing was statistically significant. Intergroup comparison of manual brushing group with modified oral irrigation group shows P < 0.05 was statistically significant. Within the limitation of the present study, it has been found novel pediatric oral hygiene need Station is more effective than manual brushing since it combined the effect of brushing, flossing (water floss), and rinsing in children simultaneously and at the same time did not demand any special motor skill.

Computer Simulations of Bottle Brushes: From Melts to Soft Networks

DOE PAGES

Cao, Zhen; Carrillo, Jan-Michael Y.; Sheiko, Sergei S.; ...

2015-07-13

We use a combination of Molecular dynamics simulations and analytical calculations, and study dens bottle-brush systems in a melt and network State. Analysis of our simulation results shows that bottle-brush macromolecules in melt behave as ideal chains with effective Kuhn length b K. Simulations show that the bottle-brush-induced bending rigidity is due to an entropy decrease caused by redistribution of the side chains upon backbone bending. The Kuhn length of the bottle:brushes increases with increasing the side-chain degree of polymerization n sc as b K proportional to n sc 0.46. Moreover, this model of bottle brush macromolecules is extended tomore » describe mechanical properties of bottle brush networks in linear and nonlinear deformation regimes. In the linear deformation regime, the network shear modulus scales with the degree of polymerization of the side chains as G 0 proportional to (n sc + 1) -1 as long as the ratio of the Kuhn length, b K, to the size of the fully extended bottle-brush backbone between cross-links, R-max, is smaller than unity, b K/R max << 1. Bottle-brush networks With b K/R max proportional to 1 demonstrate behavior similar to that of networks Of semiflexible chains with G 0 proportional to n sc -0.5. Finally, in the nonlinear network deformation regime, the deformation-dependent shear modulus is a universal function of the first strain invariant I 1 and bottle-brush backbone deformation ratio beta describing stretching ability of the bottle-brush backbone between cross-links.« less

Fluoroscopic percutaneous brush cytology, forceps biopsy and both in tandem for diagnosis of malignant biliary obstruction.

PubMed

Boos, Johannes; Yoo, Raphael J; Steinkeler, Jennifer; Ayata, Gamze; Ahmed, Muneeb; Sarwar, Ammar; Weinstein, Jeffrey; Faintuch, Salomao; Brook, Olga R

2018-02-01

To evaluate percutaneous brush cytology, forceps biopsy and a tandem procedure consisting of both, in the diagnosis of malignant biliary obstruction. A retrospective review of consecutive patients who underwent biliary brush cytology and/or forceps biopsy between 01/2010 and 09/2014 was performed. The cytology and pathology results were compared to the composite outcome (including radiological, pathological and clinical data). Cost for tandem procedure compared to brush cytology and forceps biopsy alone was calculated. A total of 232 interventions in 129 patients (70.8 ± 11.0 years) were included. Composite outcome showed malignancy in 94/129 (72.9%) patients. Sensitivity for brush cytology, forceps biopsy and tandem procedure was 40.6% (95% CI 32.6-48.7%), 42.7% (32.4-53.0%) and 55.8% (44.7-66.9%) with 100% specificity, respectively. There were 9/43 (20.9%) additional cancers diagnosed when forceps biopsy was performed in addition to brush cytology, while there were 13/43 (30.2%) more cancers diagnosed when brush cytology was performed in addition to forceps biopsy. Additional costs per additionally diagnosed malignancy if tandem approach is to be utilised in all cases was $704.96. Using brush cytology and forceps biopsy in tandem improves sensitivity compared to brush cytology and forceps biopsy alone in the diagnosis of malignant biliary obstruction. • Tandem procedure improves sensitivity compared to brush cytology and forceps biopsy. • Brush cytology may help to overcome "crush artefacts" from forceps biopsy. • The cost per diagnosed malignancy may warrant tandem procedure in all patients.

Experience of racism and tooth brushing among pregnant Aboriginal Australians: exploring psychosocial mediators.

PubMed

Ben, J; Jamieson, L M; Priest, N; Parker, E J; Roberts-Thomson, K F; Lawrence, H P; Broughton, J; Paradies, Y

2014-09-01

Despite burgeoning evidence regarding the pathways by which experiences of racism influence health outcomes, little attention has been paid to the relationship between racism and oral health-related behaviours in particular. We hypothesised that self-reported racism was associated with tooth brushing, and that this association was mediated by perceived stress and sense of control and moderated by social support. Data from 365 pregnant Aboriginal Australian women were used to evaluate tooth brushing behaviour, sociodemographic factors, psychosocial factors, general health, risk behaviours and racism exposure. Bivariate associations were explored and hierarchical logistic regression models estimated odds ratios (OR) and 95% confidence intervals (CI) for tooth brushing. Perceived stress and sense of control were examined as mediators of the association between self-reported racism and tooth brushing using binary mediation with bootstrapping. High levels of self-reported racism persisted as a risk indicator for tooth brushing (OR 0.51, 95%CI 0.27,0.98) after controlling for significant covariates. Perceived stress mediated the relationship between self-reported racism and tooth brushing: the direct effect of racism on tooth brushing was attenuated, and the indirect effect on tooth brushing was significant (beta coefficient -0.09; bias-corrected 95%CI -0.166,-0.028; 48.1% of effect mediated). Sense of control was insignificant as a mediator of the relationship between racism and tooth brushing. High levels of self-reported racism were associated with non-optimal tooth brushing behaviours, and perceived stress mediated this association among this sample of pregnant Aboriginal women.. Limitations and implications are discussed.

Frequency of daily tooth brushing: predictors of change in 9- to 11-year old US children

PubMed Central

Polk, D.E.; Geng, M.; Levy, S.; Koerber, A.; Flay, B.R.

2014-01-01

Objective To investigate whether an increase in daily tooth brushing frequency in children was predicted by either a) having a strong intention to brush twice a day or b) their parents receiving information about their new caries experience. Basic Research Design Secondary data analyses were conducted on two waves of data from the Aban Aya Youth Project and the Iowa Fluoride Study. Participants The Aban Aya study included 576 10- and 11-year olds from Chicago, Illinois. The Iowa Fluoride Study included a convenience sample of 709 babies born in Iowa. The present study includes those children at age 9. Main Outcome Measures In both studies, reported daily tooth brushing frequency was assessed twice six months apart. Results In the Aban Aya data, compared with children with a weak intention at wave 1 to brush twice a day, children with a strong intention to brush twice a day were more likely to increase their brushing frequency by wave 2, OR 7.0, 95%CI 1.5,32.9. In the Iowa Fluoride Study, compared with children who did not have new caries at wave 1, children who had new caries experience were less likely to increase their brushing frequency by wave 2, OR 0.4, 95%CI 0.2,0.9. Conclusions Strengthening intention to brush twice a day might increase children’s brushing frequency. However, simply providing parents with information about new caries probably will not. Future studies should assess tooth brushing frequency, habit strength, intention, and situational cues at closely-spaced waves. PMID:25300146

Micro-scale abrasive wear behavior of medical implant material Ti-25Nb-3Mo-3Zr-2Sn alloy on various friction pairs.

PubMed

Wang, Zhenguo; Huang, Weijiu; Ma, Yanlong

2014-09-01

The micro-scale abrasion behaviors of surgical implant materials have often been reported in the literature. However, little work has been reported on the micro-scale abrasive wear behavior of Ti-25Nb-3Mo-3Zr-2Sn (TLM) titanium alloy in simulated body fluids, especially with respect to friction pairs. Therefore, a TE66 Micro-Scale Abrasion Tester was used to study the micro-scale abrasive wear behavior of the TLM alloy. This study covers the friction coefficient and wear loss of the TLM alloy induced by various friction pairs. Different friction pairs comprised of ZrO2, Si3N4 and Al2O3 ceramic balls with 25.4mm diameters were employed. The micro-scale abrasive wear mechanisms and synergistic effect between corrosion and micro-abrasion of the TLM alloy were investigated under various wear-corrosion conditions employing an abrasive, comprised of SiC (3.5 ± 0.5 μm), in two test solutions, Hanks' solution and distilled water. Before the test, the specimens were heat treated at 760°C/1.0/AC+550°C/6.0/AC. It was discovered that the friction coefficient values of the TLM alloy are larger than those in distilled water regardless of friction pairs used, because of the corrosive Hanks' solution. It was also found that the value of the friction coefficient was volatile at the beginning of wear testing, and it became more stable with further experiments. Because the ceramic balls have different properties, especially with respect to the Vickers hardness (Hv), the wear loss of the TLM alloy increased as the ball hardness increased. In addition, the wear loss of the TLM alloy in Hanks' solution was greater than that in distilled water, and this was due to the synergistic effect of micro-abrasion and corrosion, and this micro-abrasion played a leading role in the wear process. The micro-scale abrasive wear mechanism of the TLM alloy gradually changed from two-body to mixed abrasion and then to three-body abrasion as the Vickers hardness of the balls increased. Copyright © 2014 Elsevier B.V. All rights reserved.

Characterization of Small DC Brushed and Brushless Motors

DTIC Science & Technology

2013-03-01

8 Figure 6. Torque vs. RPM for a SS7 -1.7-1 brushed motor...9 Figure 7. Efficiency vs. motor power output for SS7 -1.7-1 brushed motor...10 Figure 8. Efficiency vs. RPM for SS7 -1.7-1 brushed motor. ........................................................10 Figure 9

75 FR 21347 - Natural Bristle Paint Brushes From China

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-23

... Brushes From China AGENCY: United States International Trade Commission. ACTION: Scheduling of a full five-year review concerning the antidumping duty order on natural bristle paint brushes from China. SUMMARY... antidumping duty order on natural bristle paint brushes from China would be likely to lead to continuation or...

21 CFR 872.6030 - Oral cavity abrasive polishing agent.

Code of Federal Regulations, 2013 CFR

2013-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing.... The abrasive polish is applied to the teeth by a handpiece attachment (prophylaxis cup). (b...

21 CFR 872.6030 - Oral cavity abrasive polishing agent.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing.... The abrasive polish is applied to the teeth by a handpiece attachment (prophylaxis cup). (b...

21 CFR 872.6030 - Oral cavity abrasive polishing agent.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing.... The abrasive polish is applied to the teeth by a handpiece attachment (prophylaxis cup). (b...

21 CFR 872.6030 - Oral cavity abrasive polishing agent.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing.... The abrasive polish is applied to the teeth by a handpiece attachment (prophylaxis cup). (b...

21 CFR 872.6030 - Oral cavity abrasive polishing agent.

Code of Federal Regulations, 2014 CFR

2014-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing.... The abrasive polish is applied to the teeth by a handpiece attachment (prophylaxis cup). (b...

Electro-Optic Fabrics for the Warrior of the 21st Century - Phase II

DTIC Science & Technology

2010-01-01

46 28. Effect of 1000 cycles of hex- abrasion testing on Fire Wire cable .................................... 46 UNCLASSIFIED vi 29. Close...49 32. Effect of 2000 cycles of hex- abrasion testing on Fire Wire cable .................................... 49 33. Effect of 4000 cycles of...hex- abrasion testing on Fire Wire cable .................................... 50 34. Effect of 2000 cycles of hex- abrasion testing on USB v2 cable

21 CFR 872.6010 - Abrasive device and accessories.

Code of Federal Regulations, 2014 CFR

2014-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6010 Abrasive device and accessories... crowns. The device is attached to a shank that is held by a handpiece. The device includes the abrasive...

21 CFR 872.6010 - Abrasive device and accessories.

Code of Federal Regulations, 2013 CFR

2013-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6010 Abrasive device and accessories... crowns. The device is attached to a shank that is held by a handpiece. The device includes the abrasive...

21 CFR 872.6010 - Abrasive device and accessories.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6010 Abrasive device and accessories... crowns. The device is attached to a shank that is held by a handpiece. The device includes the abrasive...

21 CFR 872.6010 - Abrasive device and accessories.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6010 Abrasive device and accessories... crowns. The device is attached to a shank that is held by a handpiece. The device includes the abrasive...

21 CFR 872.6010 - Abrasive device and accessories.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6010 Abrasive device and accessories... crowns. The device is attached to a shank that is held by a handpiece. The device includes the abrasive...

78 FR 22213 - Airworthiness Directives; Eurocopter France Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-15

... float assemblies for any cuts, tears, punctures, or abrasion. Replace the cover if the internal... cuts, tears, punctures, or abrasion. If there is a cut, tear, puncture, or any abrasion, repair the...

Electron Microscopy Abrasion Analysis of Candidate Fabrics for Planetary Space Suit Protective Overgarment Application

NASA Technical Reports Server (NTRS)

Hennessy, Mary J.

1992-01-01

The Electron Microscopy Abrasion Analysis of Candidate Fabrics for Planetary Space Suit Protective Overgarment Application is in support of the Abrasion Resistance Materials Screening Test. The fundamental assumption made for the SEM abrasion analysis was that woven fabrics to be used as the outermost layer of the protective overgarment in the design of the future, planetary space suits perform best when new. It is the goal of this study to determine which of the candidate fabrics was abraded the least in the tumble test. The sample that was abraded the least will be identified at the end of the report as the primary candidate fabric for further investigation. In addition, this analysis will determine if the abrasion seen by the laboratory tumbled samples is representative of actual EVA Apollo abrasion.

46 CFR 108.187 - Ventilation for brush type electric motors in classified spaces.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation for brush type electric motors in classified... Ventilation for brush type electric motors in classified spaces. Ventilation for brush type electric motors in... Electrical Equipment in Hazardous Locations”, except audible and visual alarms may be used if shutting down...

77 FR 77037 - Procurement List; Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

...-Compatible, 2'' x 8'' NSN: 7920-00-NIB-0545--Scrub Brush, Wire, Knuckle Guard, Long Handle, Ergonomic, 6'' x 1 1/8'', w/built-in scraper NSN: 7920-00-NIB-0547--Scrub Brush, Wire, Stainless, Ergonomic, 5'' NSN: 7920-00-NIB-0558--Scrub Brush, Wire, Black Tempered, Ergonomic, 5'' NSN: 7920-00-NIB-0563--Wire Brush...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martinez, Andre P.; Carrillo, Jan-Michael Y.; Dobrynin, Andrey V.

The molecular weight and polydispersity of the chains in a polymer brush are critical parameters determining the brush properties. However, the characterization of polymer brushes is hindered by the vanishingly small mass of polymer present in brush layers. In this study, in order to obtain sufficient quantities of polymer for analysis, polymer brushes were grown from high surface area fibrous nylon membranes by ATRP. We synthesized the brushes with varying surface initiator densities, polymerization times, and amounts of sacrificial initiator, then cleaved from the substrate, and analyzed by GPC and NMR. Characterization showed that the surface-grown polymer chains were moremore » polydisperse and had lower average molecular weight compared to solution-grown polymers synthesized concurrently. Furthermore, the molecular weight distribution of the polymer brushes was observed to be bimodal, with a low molecular weight population of chains representing a significant mass fraction of the polymer chains at high surface initiator densities. Moreover, the origin of this low MW polymer fraction is proposed to be the termination of growing chains by recombination during the early stages of polymerization, a mechanism confirmed by molecular dynamics simulations of brush polymerization.« less

Facilitators and barriers to twice daily tooth brushing among children with special health care needs

PubMed Central

Campanaro, Maria; Huebner, Colleen E.; Davis, Beth Ellen

2015-01-01

Purpose The oral hygiene routines of preschool-age children with special health care needs (CSHCN) were examined to identify caregiver behaviors and beliefs associated with twice daily tooth brushing. Methods Ninety caregivers of CSHCN, ages 23 to 62 months, were interviewed to determine supports or barriers to tooth brushing. Results Ninety-eight percent of caregivers had begun brushing their child’s teeth and half reported brushing twice daily. Caregivers’ brushing skills and the availability of child-friendly supplies were associated with twice daily versus less frequent brushing (p = .02). Conclusions This study adds insight into the challenges of establishing daily oral health care for children who must rely on others for their care. The facilitators and barriers to tooth brushing by caregivers of CSHCN are similar to those noted previously among parents of typically developing children. Efforts to improve all caregivers’ oral hygiene skills are needed. For caregivers of CSHCN, oral health teaching opportunities may exist among professionals who provide ongoing medical care, special services and therapies. PMID:24252060

Facilitators and barriers to twice daily tooth brushing among children with special health care needs.

PubMed

Campanaro, Maria; Huebner, Colleen E; Davis, Beth Ellen

2014-01-01

The oral hygiene routines of preschool-age children with special health care needs (CSHCN) were examined to identify caregiver behaviors and beliefs associated with twice daily tooth brushing. Ninety caregivers of CSHCN, ages 23 to 62 months, were interviewed to determine supports or barriers to tooth brushing. Ninety-eight percent of caregivers had begun brushing their child's teeth and half reported brushing twice daily. Caregivers' brushing skills and the availability of child-friendly supplies were associated with twice daily versus less frequent brushing (p = .02). This study adds insight into the challenges of establishing daily oral health care for children who must rely on others for their care. The facilitators and barriers to tooth brushing by caregivers of CSHCN are similar to those noted previously among parents of typically developing children. Efforts to improve all caregivers' oral hygiene skills are needed. For caregivers of CSHCN, oral health teaching opportunities may exist among professionals who provide ongoing medical care, special services and therapies. © 2014 Special Care Dentistry Association and Wiley Periodicals, Inc.

Lapping slurry

DOEpatents

Simandl, Ronald F.; Upchurch, Victor S.; Leitten, Michael E.

1999-01-01

Improved lapping slurries provide for easier and more thorough cleaning of alumina workpieces, as well as inhibit corrosion of the lapping table and provide for easier cleaning of the lapping equipment. The unthickened lapping slurry comprises abrasive grains such as diamond abrasive dispersed in a carrier comprising water, glycerine, and triethanolamine. The thickened lapping slurry comprises abrasive grains such as diamond abrasive dispersed in a carrier comprising water, glycerine, triethanolamine, a water soluble silicate, and acid.

Microhardness evaluation of silorane and methacrylate composites submitted to erosion and abrasion processes

PubMed Central

Gazola, Eloá Aguiar; Rego, Marcos Augusto; Brandt, William Cunha; D’Arce, Maria Beatriz Freitas; Liporoni, Priscila Christiane Suzy

2015-01-01

Abstract Objective: The aim of this study was to evaluate the Knoop hardness number (KHN) of methacrylate (MC) and silorane (SC) composites after being submitted to erosion and abrasion processes. Material and methods: Forty samples were made with each composite: MC and SC. The samples were divided into eight groups (n = 10) according to the type of composite (G1–G4, MC; G5–G8, SC) and the beverages involved in the erosion process (G1 and G5 – Control (C), without erosion, with abrasion; G2 and G6 – Orange Juice (OJ), abrasion; G3 and G7 – Smirnoff Ice® (SI), abrasion; G4 and G8 – Gatorade® (GA), abrasion). The KHN test was performed 24 h after the last cycle of erosion/abrasion. Results: The MC groups showed smaller KHN values for the SI group (p < 0.05) when compared to the Control and OJ groups; however, for the SC groups, no differences were found (p > 0.05). Conclusion: Methacrylate composite when submitted to acidic beverages erosive challenge combined with abrasive process might alter its surface microhardness. However, the beverages used in the present study were not able to interfere in silorane composite surface microhardness. PMID:28642903

Size-dependent enrichment of waste slag aggregate fragments abraded from asphalt concrete.

PubMed

Takahashi, Fumitake; Shimaoka, Takayuki; Gardner, Kevin; Kida, Akiko

2011-10-30

Authors consider the environmental prospects of using melted waste slag as the aggregate for asphalt pavement. In particular, the enrichment of slag-derived fragments in fine abrasion dust particles originated from slag asphalt concrete and its size dependency were concerned. A series of surface abrasion tests for asphalt concrete specimens, containing only natural aggregates as reference or 30 wt% of substituted slag aggregates, were performed. Although two of three slag-asphalt concretes generated 1.5-3.0 times larger amount of abrasion dust than the reference asphalt concrete did, it could not be explained only by abrasion resistance of slag. The enrichment of slag-derived fragments in abrasion dust, estimated on the basis of the peak intensity of quartz and heavy metal concentrations, had size dependency for all slag-asphalt concretes. Slag-derived fragments were enriched in abrasion dust particles with diameters of 150-1000 μm. Enrichment factors were 1.4-2.1. In contrast, there was no enrichment in abrasion dust particles with diameter less than 75 μm. This suggests that prior airborne-size fragmentation of substituted slag aggregates does not need to be considered for tested slag aggregates when environmental risks of abrasion dust of slag-asphalt pavement are assessed. Copyright © 2011 Elsevier B.V. All rights reserved.

Relationships Between Abrasive Wear, Hardness, and Surface Grinding Characteristics of Titanium-Based Metal Matrix Composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blau, Peter Julian; Jolly, Brian C

2009-01-01

The objective of this work was to support the development of grinding models for titanium metal-matrix composites (MMCs) by investigating possible relationships between their indentation hardness, low-stress belt abrasion, high-stress belt abrasion, and the surface grinding characteristics. Three Ti-based particulate composites were tested and compared with the popular titanium alloy Ti-6Al-4V. The three composites were a Ti-6Al-4V-based MMC with 5% TiB{sub 2} particles, a Ti-6Al-4V MMC with 10% TiC particles, and a Ti-6Al-4V/Ti-7.5%W binary alloy matrix that contained 7.5% TiC particles. Two types of belt abrasion tests were used: (a) a modified ASTM G164 low-stress loop abrasion test, and (b)more » a higher-stress test developed to quantify the grindability of ceramics. Results were correlated with G-ratios (ratio of stock removed to abrasives consumed) obtained from an instrumented surface grinder. Brinell hardness correlated better with abrasion characteristics than microindentation or scratch hardness. Wear volumes from low-stress and high-stress abrasive belt tests were related by a second-degree polynomial. Grindability numbers correlated with hard particle content but were also matrix-dependent.« less

Investigation into the mechanisms of closed three-body abrasive wear

NASA Astrophysics Data System (ADS)

Dwyer-Joyce, R. S.; Sayles, R. S.; Ioannides, E.

1994-06-01

Contacting components frequently fail by abrasion caused by solid contaminants in the lubricant. This process can be classified as a closed three-body abrasive wear process. The mechanisms by which trapped particles cause material removal are not fully understood. This paper describes tests using model elastohydrodynamic contacts to study these mechanisms. An optical elastohydrodynamic lubrication rig has been used to study the deformation and fracture of ductile and brittle lubricant-borne debris. A ball-on-disk machine was used to study the behavior of the particles in partially sliding contacts. Small diamond particles were used as abrasives since these were thought not to break down in the contact; wear could then be directly related to particles of a known size. The particles were found to embed in the softer surface and to scratch the harder. The mass of material worn from the ball surface was approximately proportional to the particle sliding distance and abrasive concentration. Small particles tumbled through the contact, while larger particles ploughed. Mass loss was found to increase with abrasive particle size. Individual abrasion scratches have been measured and related to the abrading particle. A simple model of the abrasive process has been developed and compared with experimental data. The discrepancies are thought to be the result of the uncertainty about the entrainment of particles into the contact.

Development of feedback-speed-control system of fixed-abrasive tool for mat-surface fabrication

NASA Astrophysics Data System (ADS)

Yanagihara, K.; Kita, R.

2018-01-01

This study deals with the new method to fabricate a mat-surface by using fixed-abrasive tool. Mat-surface is a surface with microscopic irregularities whose dimensions are close to the wavelengths of visible light (400-700 nanometers). In order to develop the new method to fabricate mat-surface without pre-masking and large scale back up facility, utilization of fixed-abrasive tool is discussed. The discussion clarifies that abrasives in shot blasting are given kinetic energy along to only plunge-direction while excluding traverse-direction. If the relative motion between tool and work in fixed-abrasive process can be realized as that in blasting, mat-surface will be accomplished with fixed-abrasive process. To realize the proposed idea, new surface-fabrication system to which is adopted feedback-speed-control of abrasive wheel has been designed. The system consists of micro-computer unit (MPU), work-speed sensor, fixed-abrasive wheel, and wheel driving unit. The system can control relative speed between work and wheel in optimum range to produce mat-surface. Finally experiment to verify the developed system is carried out. The results of experiments show that the developed system is effective and it can produce the surface from grinding to mat-surface seamlessly.

Effectiveness of Plaque Control with Novel Pediatric Oral Hygiene Need Station (Modified Oral Irrigation Device) as Compared with Manual Brushing and Flossing: Randomized Controlled Pilot Trial

PubMed Central

Murthy, Prashanth Sadashiva; Shaik, Naseemoon; Deshmukh, Seema; Girish, M. S.

2018-01-01

Background: Establishing good hygiene habits are valuable for present and future oral health. Below 6 years, tooth brushing should be performed by parents, as increasing dexterity and cognition may permit supervised brushing until the child is capable of independent brushing. Aim and Objectives: The aim of the present study was to evaluate the effectiveness of modified oral irrigation device in children in terms of plaque control and to compare the effectiveness of plaque control with manual brushing with the modified oral irrigation device in children. Materials and Methods: A randomized clinical trial was performed on 12 subjects who were allocated to the two study groups. After obtaining the consent, the control group was instructed tooth brushing with regular pediatric commercially available toothbrush and the intervention group with modified oral irrigation device. Plaque scores in both groups were assessed pre- and post-brushing using modified navy plaque index. Results: The data were subjected to Descriptive statistics and Paired t-test using SPSS version 22. Intragroup comparison of mean difference of plaque score in control group and intervention group pre- and post-brushing was statistically significant. Intergroup comparison of manual brushing group with modified oral irrigation group shows P < 0.05 was statistically significant. Conclusion: Within the limitation of the present study, it has been found novel pediatric oral hygiene need Station is more effective than manual brushing since it combined the effect of brushing, flossing (water floss), and rinsing in children simultaneously and at the same time did not demand any special motor skill. PMID:29875555

Oral hygiene practices and risk of oral leukoplakia.

PubMed

Macigo, F G; Gathece, L W; Guthua, S W; Njeru, E K; Wagaiyu, E G; Mulli, T K

2006-04-01

To determine the influence of oral hygiene habits and practices on the risk of developing oral leukoplakia. Case control study. Githongo sublocation in Meru District. Eighty five cases and 141 controls identified in a house-to-house screening. The relative risk (RR) of oral leukoplakia increased gradually across the various brushing frequencies from the reference RR of 1.0 in those who brushed three times a day, to 7.6 in the "don't brush" group. The trend of increase was statistically significant (X2 for Trend : p = 0.001). The use of chewing stick as compared to conventional tooth brush had no significant influence on RR of oral leukoplakia. Non-users of toothpastes had a significantly higher risk of oral leukoplakia than users (RR = 1.8; 95% confidence levels (CI) = 1.4-2.5). Among tobacco smokers, the RR increased from 4.6 in those who brushed to 7.3 in those who did not brush. Among non-smokers, the RR of oral leukoplakia in those who did not brush (1.8) compared to those who brushed was also statistically significant (95% CL = 1.6-3.8). Failure to brush teeth and none use of toothpastes are significantly associated with the development of oral leukoplakia, while the choice of brushing tools between conventional toothbrush and chewing stick is not. In addition, failure to brush teeth appeared to potentiate the effect of smoking tobacco in the development of oral leukoplakia. Oral health education, instruction and motivation for the improvement of oral hygiene habits and practices; and therefore oral hygiene status, should be among the strategies used in oral leukoplakia preventive and control programmes.

Interdental cleaning and gingival injury potential of interdental toothbrushes.

PubMed

Vogel, Marc; Sener, Beatrice; Roos, M; Attin, Thomas; Schmidlin, Patrick R

2014-01-01

The effective cleaning of interdental spaces using toothbrushes is a challenge. The aim of the present in vitro study was to evaluate on the one hand the interdental cleaning efficiency and on the other hand the gingival injury potential of an electric single-headed sonic toothbrush (Water-pik) and two single-tufted manual toothbrushes (Curaprox 1009; Lactona Interdental Brush). Brushes were evaluated using a brushing device. Test dental casts (maxillary sextants) consisting of black teeth coated with white paint were brushed using standardized horizontal movements. Thereafter, black (i.e. cleaned) areas were measured planimetrically. The soft tissue injury potential was evaluated using front segments of porcine mandibles. In the same brushing device, test brushes were moved over the gingiva. Before and after each treatment, the porcine mucosa was stained with a plaque disclosing agent to visualize injured areas, which could then be measured planimetrically as well. These evaluations were each made after 15, 30, 60, and 120 seconds of brushing. The statistical analysis was performed using non-parametric Mann-Whitney tests, and the level of significance was set at 5%. The best cleaning performance of 46% across all interdental spaces assessed was found with the electric sonic toothbrush (Waterpik), while the performances of the manual brushes from Lactona and Curaprox were 14.8% and 5%, respectively. At each point of evaluation, the gingiva was injured most markedly by the powered sonic toothbrush (Waterpik), followed by the manual Curaprox brush. The smallest damage of the porcine gingiva was produced by the manual Lactona brush. When comparing the manual toothbrushes, the Lactona product revealed a better cleaning performance combined with a smaller injury potential than the Curaprox brush. Thus, the prophylactic goal to achieve high degrees of cleaning while producing minimal damage is important and should have priority when evaluating and selecting toothbrushes.

Efficacy of 3 toothbrush treatments on plaque removal in orthodontic patients assessed with digital plaque imaging: a randomized controlled trial.

PubMed

Erbe, Christina; Klukowska, Malgorzata; Tsaknaki, Iris; Timm, Hans; Grender, Julie; Wehrbein, Heinrich

2013-06-01

Good oral hygiene is a challenge for orthodontic patients because food readily becomes trapped around the brackets and under the archwires, and appliances are an obstruction to mechanical brushing. The purpose of this study was to compare plaque removal efficacy of 3 toothbrush treatments in orthodontic subjects. This was a replicate-use, single-brushing, 3-treatment, examiner-blind, randomized, 6-period crossover study with washout periods of approximately 24 hours between visits. Forty-six adolescent and young adult patients with fixed orthodontics from a university clinic in Germany were randomized, based on computer-generated randomization, to 1 of 3 treatments: (1) oscillating-rotating electric toothbrush with a specially designed orthodontic brush head (Oral-B Triumph, OD17; Procter & Gamble, Cincinnati, Ohio); (2) the same electric toothbrush handle with a regular brush head (EB25; Procter & Gamble); and (3) a regular manual toothbrush (American Dental Association, Chicago, Ill). The primary outcome was the plaque score change from baseline, which we determined using digital plaque image analysis. Forty-five subjects completed the study. The differences in mean plaque removal (95% confidence interval) between the electric toothbrush with an orthodontic brush head (6% [4.4%-7.6%]) or a regular brush head (3.8% [2.2%-5.3%]) and the manual toothbrush were significant (P <0.001). Plaque removal with the electric toothbrush with the orthodontic brush head was superior (2.2%; P = 0.007) to the regular brush head. No adverse events were seen. The electric toothbrush, with either brush head, demonstrated significantly greater plaque removal over the manual brush. The orthodontic brush head was superior to the regular head. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Development and testing of a theory-based behavioural change intervention: a pilot investigation in a nursery school in a deprived area of Scotland.

PubMed

Gilinsky, A; Swanson, V; Merrett, M; Power, K; Marley, L

2012-03-01

Investigate the effect of a theory-based intervention on oral-health knowledge, attitudes and behaviours of early years staff (EYS), parents and nursery children. Qualitative research with staff and parents from eight nurseries through interviews/focus groups. An intervention was developed and piloted using pre-posttest design. Nurseries in deprived communities in Dundee, Scotland. 111 children aged 3-5 years attending nursery, including 79 parents and 8 nursery staff. Staff session targeted outcome expectancies, subjective norms and self-efficacy for tooth-brushing in nursery using information provision, modelling and goal-setting, followed by a three-week intervention. Parent-child dyads received a leaflet with instructions for goal-setting, planning and monitoring home brushing. Tooth-brushing self-monitoring materials (e.g. two-minute timer, diaries) were used and certificates provided in the nursery as rewards. EYS knowledge, attitudes and behaviours were assessed before and after the intervention using self-report questionnaires. Parents completed interviews assessing beliefs about tooth-brushing and their children's tooth-brushing behaviour at baseline and post-intervention follow-up. Significant improvements in staff knowledge, but not attitudes, self-efficacy, or nursery tooth-brushing were reported. Parent-child dyads completing the intervention were not more likely to report their child carried out twice-daily tooth-brushing at home. The intervention did not improve parents' intentions to brush their child's teeth twice a day or beliefs about the ease of twice-daily tooth-brushing. Only past behaviour significantly predicted posttest brushing. Parents who found brushing easier at baseline were more likely to complete the intervention. Recommendations are made regarding implementing psychological theory and methods into oral-health interventions.

Polymer brush coatings for DNA: fundamental polymer physics and nanofabrication applications

NASA Astrophysics Data System (ADS)

de Vries, Renko

Recombinant DNA technology allows for the production of precisely defined self-assembling protein-based polymers. So far, the major applications for such protein-based polymers have been self-assembling hydrogels and micellar structures with biomedical application. Inspired by minimal models for the self-ssembly of rod-shaped viruses such as the tobacco mosaic virus, I have developed protein-polymers that co-assemble with DNA into rod-shaped virus-like particles, and protein-polymers that provide brush coatings around single DNA molecules. In this presentation I will focus on the latter, showing that on the one hand brush coated DNA is a rich model system for exploring the physics of bottle-brush polymers, while on the other hand brush coatings of DNA can also play an important practical role in nanofabrication. A key problem in the physics of bottle-brush polymers that I will address is the scale-dependence of bottle-brush elasticity. For long-wavelength thermal deformations probed by AFM imaging I will demonstrate that there is significant stiffening due to the brush coating, while for short wavelength thermal deformations probed by force spectroscopy, we find that stiffening due to the brush coating disappears completely. DNA brush coatings can also play an important practical role in nanofabrication by acting as a compatibilizer between chemically different building blocks. I will explore the example of DNA origami in combination with gold nanoparticles: while Mg2+ ions and high concentrations of monovalent salts are crucial for the stability of DNA origami, such solution conditions are typically incompatible with the colloidal stability of gold nanoparticles.I will show how DNA brush coatings can dramatically enhance the yield of formation of isolated DNA-gold nanoparticle composite nanostructures.

Tooth brushing among 11- to 15-year-olds in Denmark: combined effect of social class and migration status.

PubMed

Bast, L S; Nordahl, H; Christensen, L B; Holstein, B E

2015-03-01

Regular tooth brushing in adolescence predicts stable tooth brushing habits later in life. Differences in tooth brushing habits by ethnic background and socioeconomic position have been suggested. We investigated migration status and social class in relation to infrequent tooth brushing both separately and combined. The study population was 11-15 year-olds chosen from a clustered random sample of schools. Univariate and multivariate logistic regression analyses estimated the separate and combined effects of migration status and social class on less than twice daily tooth brushing. 10,607 respondents: a response rate of 88.3%. Boys of lower social class had higher odds ratio (OR) of infrequent tooth brushing than girls: 1.98 (95% confidence interval 1.62-2.41) vs 1.80 (1.53-2.24). Immigrants and descendants had higher odds compared to adolescents of Danish origin: immigrant boys OR 1.39 (1.05-1.89), girls OR 1.92 (1.47-2.50); descendant boys OR 2.53 (1.97-3.27), girls OR 2.56 (2.02-3.35). Analyses of the combined effect of social class and migration status showed that the social gradient in tooth brushing habits observed among ethnic Danes cannot be found among groups of immigrants and descendants. The study shows that both non-Danish origin and low social class increases the risk of infrequent tooth brushing among school-aged children. The study calls for in depth analyses of the processes which influence young people's tooth brushing habits. Further, there is a need to strengthen the promotion of appropriate tooth brushing habits of minority and low social class youths.

Tooth-brushing behaviour in 6-12 year olds.

PubMed

Sandström, Anna; Cressey, Janet; Stecksén-Blicks, Christina

2011-01-01

A common clinical finding is that many schoolchildren display a nonacceptable oral hygiene. To evaluate the tooth-brushing behaviour in children aged 6-12 years. The study used a cross-sectional descriptive design. Children aged 6, 8, 10, and 12 years in an elementary school in a middle class area in Umeå, a city in northern Sweden, were invited and 82 (82%) consented. Visible plaque on buccal surfaces of incisors and canines was recorded from photographs of the participant's teeth before and after brushing using the scores of the Green and Vermillion Oral Hygiene Index. Brushing technique was recorded with a video camera. A questionnaire was used to collect data about oral hygiene habits at home. The ratio between the sum of plaque scores after and before brushing was statistically significantly higher in the 6-year-old group compared with the 10-year olds, (P < 0.05). There was a negative correlation between time spent for brushing and the ratio between the sum of plaque scores after and before brushing (r = -0.31, P < 0.01). The lowest correlation was displayed in the youngest age group (r = 0.07, P > 0.05). Six-year olds spent statistically significantly less time for brushing than older children (P < 0.05). Plaque removal from buccal surfaces from brushing was poor and averaged 19% for 6-year olds and 30% for older children. The results of brushing for children aged 8-12 years could benefit from increasing tooth-brushing time. Children could be given an increasing responsibility from 7 to 8 year of age but parental help is motivated up to 10 years of age. © 2010 The Authors. International Journal of Paediatric Dentistry © 2010 BSPD, IAPD and Blackwell Publishing Ltd.

A comparative evaluation of the in vitro penetration performance of the improved Crest complete toothbrush versus the Current Crest complete toothbrush, the Colgate Precision toothbrush and the Oral-B P40 toothbrush.

PubMed

Volpenhein, D W; Handel, S E; Hughes, T J; Wild, J

1996-01-01

Removal of plaque and debris from interproximal surfaces during toothbrushing has generally been difficult to achieve, in large part because traditional flat-bristled toothbrushes do not offer good interproximal penetration. As a result, a number of varying bristle designs have been developed, with the rippled-design brush shown to be particularly effective at removing interproximal plaque. Recently, an existing brush, the original Crest Complete, was modified to offer a more deeply rippled version. This study evaluated the interproximal penetration of four bristle designs: rippled pattern (original Crest Complete), deeper rippled pattern (improved Crest Complete), multi-level (Colgate Precision), and flat-tufted (Oral-B P40). The study used a previously reported in vitro model for determining interproximal penetration of manual toothbrushes (J Clin Dent 5:27-33, 1994). In order to effectively mimic the in-use characteristics of toothbrushing, this model is based on analysis of videotaped consumer brushing habits, tooth morphology, and in vivo plaque tenacity characteristics and uses the three most predominantly used brushing techniques (circular, up-and-down, and back-and-forth, with the brush held at both 45 and 90 degrees to the tooth surface). In addition, the model's brush stroke length, brush force, and brush speed are likewise based on analysis of consumer brushing patterns. The results of the study indicate that the new Crest Complete with deeper rippled bristles provided significantly superior (p < or = 0.05) interproximal penetration than the Colgate Precision and Oral-B brushes overall and for three of the four brush strokes tested. In addition, the new Crest Complete was found to provide significantly superior interproximal penetration to the original Crest Complete overall and in circular and up-and-down strokes, and the original Crest Complete provided superior overall interproximal penetration to the Colgate and Oral-B brushes.

A hybrid floating brush seal (HFBS) for improved sealing and wear performance in turbomachinery applications

NASA Astrophysics Data System (ADS)

Lattime, Scott Byran

A conceptually new type of seal has been developed for gas turbine applications which dramatically reduces wear and leakage associated with current labyrinth and brush seal technologies. The Hybrid Floating Brush Seal (HFBS) combines brush seal and film riding face seal technologies to create a hybrid seal that allows both axial and radial excursions of the sealed shaft, while simultaneously eliminating interface surface speeds (friction and heat) between the rotor and the brush material that characterize standard brush seal technology. A simple test rig was designed to evaluate feasibility of the HFBS under relatively low pressures and rotational speeds (50psig, 5krpm). A second test stand was created to study the effects of centrifugal force on bristle deflection. A third test facility was constructed for prototype development and extensive room temperature testing at moderate pressures and fairly high rotational speeds (100psig, 40krpm). This test rig also allowed the evaluation of the HFBS during axial movement of a rotating shaft. An analytical model to predict the effects of centrifugal force on the bristles of a rotating brush seal was developed. Room temperature analysis of the HFBS proved successful for relatively high operating rotational velocities at moderate pressures with very acceptable leakage rates for gas turbine engines. Brush seals were able to track rotor speeds up to 24krpm while maintaining sealing integrity. The HFBS's ability to function under axial shaft displacement and synchronous dynamic radial loading was also proven successful. Hydrodynamic performance of the face seal was proven to provide adequate stiffness and load carrying capacity to keep the brush seal from contacting the face seal at pressure drops across the brush of up to 100psi. Leakage performance over standard brush seal and labyrinth technology was quite dramatic. The HFBS showed its sealing advantage using much higher radial interference between the rotor and the bristle bore over standard brush seal designs. Experimental results of the HFBS showed leakage reductions of 6 to 7 times that of a standard brush seal at the same operating pressure ratios and rotational speed and an order of magnitude less than numerical predictions of a standard labyrinth seal. (Abstract shortened by UMI.)

Precision replenishable grinding tool and manufacturing process

DOEpatents

Makowiecki, D.M.; Kerns, J.A.; Blaedel, K.L.; Colella, N.J.; Davis, P.J.; Juntz, R.S.

1998-06-09

A reusable grinding tool consisting of a replaceable single layer of abrasive particles intimately bonded to a precisely configured tool substrate, and a process for manufacturing the grinding tool are disclosed. The tool substrate may be ceramic or metal and the abrasive particles are preferably diamond, but may be cubic boron nitride. The manufacturing process involves: coating a configured tool substrate with layers of metals, such as titanium, copper and titanium, by physical vapor deposition (PVD); applying the abrasive particles to the coated surface by a slurry technique; and brazing the abrasive particles to the tool substrate by alloying the metal layers. The precision control of the composition and thickness of the metal layers enables the bonding of a single layer or several layers of micron size abrasive particles to the tool surface. By the incorporation of an easily dissolved metal layer in the composition such allows the removal and replacement of the abrasive particles, thereby providing a process for replenishing a precisely machined grinding tool with fine abrasive particles, thus greatly reducing costs as compared to replacing expensive grinding tools. 11 figs.

Precision replenishable grinding tool and manufacturing process

DOEpatents

Makowiecki, Daniel M.; Kerns, John A.; Blaedel, Kenneth L.; Colella, Nicholas J.; Davis, Pete J.; Juntz, Robert S.

1998-01-01

A reusable grinding tool consisting of a replaceable single layer of abrasive particles intimately bonded to a precisely configured tool substrate, and a process for manufacturing the grinding tool. The tool substrate may be ceramic or metal and the abrasive particles are preferably diamond, but may be cubic boron nitride. The manufacturing process involves: coating a configured tool substrate with layers of metals, such as titanium, copper and titanium, by physical vapor deposition (PVD); applying the abrasive particles to the coated surface by a slurry technique; and brazing the abrasive particles to the tool substrate by alloying the metal layers. The precision control of the composition and thickness of the metal layers enables the bonding of a single layer or several layers of micron size abrasive particles to the tool surface. By the incorporation of an easily dissolved metal layer in the composition such allows the removal and replacement of the abrasive particles, thereby providing a process for replenishing a precisely machined grinding tool with fine abrasive particles, thus greatly reducing costs as compared to replacing expensive grinding tools.

Mangrove Cultivation For Dealing With Coastal Abrasion Case Study Of Karangsong

NASA Astrophysics Data System (ADS)

Fatimatuzzahroh, Feti; Hadi, Sudharto P.; Purnaweni, Hartuti

2018-02-01

Coastal abrasion is consequence from destructive waves and sea current. One of cause is human intervention. The effort to solve of abrasion is by mangrove cultivation. Mangroves are halophyte plant that can restrain the sea wave. Mangrove cultivation required participation community that give awareness the importance of mangrove in coastal sustainability. Mangroves in coastal Karangsong, Indramayu west java, in 2007 was through abrasion approximately 127.30 ha. Mangrove cultivation in Karangsong has been replanting since 1998 to 2003, but there was no maintenance and management. In 2007 until 2015 Karangsong replanting mangroves and has been succeed. Karangsong became the center of mangrove study for west java area in 2015. This achievement is result of cooperation between community, NGO, and local government. In addition, this effort made not only overcome the abrasion problem but also give community awareness about the importance of mangrove cultivation in preventing coastal abrasion throughout community development. This paper reviews abrasion in Karangsong and the impact for local community and empowerment in mangrove cultivation. To achieve the success mangrove cultivation required community development approach from planning process, planting, maintenance and management.