Science.gov

Sample records for absorbance capacity method

  1. Antioxidant activity of the giant jellyfish Nemopilema nomurai measured by the oxygen radical absorbance capacity and hydroxyl radical averting capacity methods.

    PubMed

    Harada, Kazuki; Maeda, Toshimichi; Hasegawa, Yoshiro; Tokunaga, Takushi; Ogawa, Shinya; Fukuda, Kyoko; Nagatsuka, Norie; Nagao, Keiko; Ueno, Shunshiro

    2011-01-01

    The giant jellyfish Nemopilema nomurai (reaching sizes of up to 2 m diameter and 150 kg), which forms dense blooms, has caused extensive damage to fisheries by overloading trawl nets, while its toxic nematocysts cause dermatological symptoms. Giant jellyfish are currently discarded on the grounds of pest control. However, the giant jellyfish is considered to be edible and is part of Chinese cuisine. Therefore, we investigated whether any benefits for human health may be derived from consumption of the jellyfish in order to formulate medicated diets. Antioxidant activity of Nemopilema nomurai was measured using the oxygen radical absorbance capacity (ORAC) and hydroxyl radical averting capacity (HORAC) methods. Based on the results, the ORAC value of the giant jellyfish freeze-dried sample was 541 µmol trolox equivalent (TE)/100 g and the HORAC value was 3,687 µmol gallic acid equivalent (GAE)/100 g. On the other hand, the IC50 value of hydroxyl radical scavenging activity measured by using the electron spin resonance method was 3.3%. In conclusion, the results suggest that the freeze-dried powder of the giant jellyfish Nemopilema nomurai is a potentially beneficial food for humans.

  2. Methods for absorbing neutrons

    DOEpatents

    Guillen, Donna P [Idaho Falls, ID; Longhurst, Glen R [Idaho Falls, ID; Porter, Douglas L [Idaho Falls, ID; Parry, James R [Idaho Falls, ID

    2012-07-24

    A conduction cooled neutron absorber may include a metal matrix composite that comprises a metal having a thermal neutron cross-section of at least about 50 barns and a metal having a thermal conductivity of at least about 1 W/cmK. Apparatus for providing a neutron flux having a high fast-to-thermal neutron ratio may include a source of neutrons that produces fast neutrons and thermal neutrons. A neutron absorber positioned adjacent the neutron source absorbs at least some of the thermal neutrons so that a region adjacent the neutron absorber has a fast-to-thermal neutron ratio of at least about 15. A coolant in thermal contact with the neutron absorber removes heat from the neutron absorber.

  3. Oxygen radical absorbance capacity (ORAC) of cyclodextrin-solubilized flavonoids, resveratrol and astaxanthin as measured with the ORAC-EPR method

    PubMed Central

    Sueishi, Yoshimi; Ishikawa, Misa; Yoshioka, Daisuke; Endoh, Nobuyuki; Oowada, Shigeru; Shimmei, Masashi; Fujii, Hirotada; Kotake, Yashige

    2012-01-01

    Recently, we proposed an oxygen radical absorbance capacity method that directly quantifies the antioxidant’s scavenging capacity against free radicals and evaluated the radical scavenging abilities for water soluble antioxidant compounds. In this study, we determined the radical scavenging abilities of lipophilic antioxidants which were solubilized by cyclodextrin in water. Commonly employed fluorescence-based method measures the antioxidant’s protection capability for the fluorescent probe, while we directly quantify free-radical level using electron paramagnetic resonance spin trapping technique. In addition, the spin trapping-based method adopted controlled UV-photolysis of azo-initiator for free radical generation, but in fluorescence-based method, thermal decomposition of azo-initiator was utilized. We determined the radical scavenging abilities of seven well-known lipophilic antioxidants (five flavonoids, resveratrol and astaxanthin), using methylated β-cyclodextrin as a solubilizer. The results indicated that the agreement between spin trapping-based and fluorescence-based values was only fair partly because of a large variation in the previous fluorescence-based data. Typical radical scavenging abilities in trolox equivalent unit are: catechin 0.96; epicatechin 0.94; epigallocatechin gallate 1.3; kaempferol 0.37; myricetin 3.2; resveratrol 0.64; and astaxanthin 0.28, indicating that myricetin possesses the highest antioxidant capacity among the compounds tested. We sorted out the possible causes of the deviation between the two methods. PMID:22448093

  4. Oxygen-radical absorbance capacity assay for antioxidants.

    PubMed

    Cao, G; Alessio, H M; Cutler, R G

    1993-03-01

    A relatively simple but sensitive and reliable method of quantitating the oxygen-radical absorbing capacity (ORAC) of antioxidants in serum using a few microliter is described. In this assay system, beta-phycoerythrin (beta-PE) is used as an indicator protein, 2,2'-azobis(2-amidinopropane) dihydrochloride (AAPH) as a peroxyl radical generator, and 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (Trolox, a water-soluble vitamin E analogue) as a control standard. Results are expressed as ORAC units, where 1 ORAC unit equals the net protection produced by 1 microM Trolox. The uniqueness of this assay is that total antioxidant capacity of a sample is estimated by taking the oxidation reaction to completion. At this point all of the nonprotein antioxidants (which include alpha-tocopherol, vitamin C, beta-carotene, uric acid, and bilirubin) and most of the albumin in the sample are oxidized by the peroxyl radical. Results are quantified by measuring the protection produced by antioxidants. This solves many problems associated with kinetics or lag-time measurements. A linear correlation of ORAC value with concentration of serum. Trolox, vitamin C, uric acid, and bovine albumin is demonstrated. The coefficient of variation within a run is found to be about 2% and from run to run about 5%. Trolox, alpha-tocopherol, vitamin C, beta-carotene, uric acid, and bilirubin completely protect beta-PE from oxidation, while bovine albumin protects beta-PE only partially. On a molar basis, the relative peroxyl radical absorbance capacity of Trolox, alpha-tocopherol acid succinate, uric acid, bilirubin, and vitamin C is 1:1:0.92:0.84:0.52. Bovine albumin per unit weight has a lower peroxyl absorbing capacity than these antioxidants.(ABSTRACT TRUNCATED AT 250 WORDS)

  5. Device for Measuring Heat Capacities of Microcalorimeter Absorber Materials

    NASA Astrophysics Data System (ADS)

    Kotsubo, Vincent; Beall, James; Ullom, Joel

    2009-12-01

    We are developing a device for measuring the heat capacity of candidate absorber materials for gamma-ray microcalorimeters with the goal of finding materials with low heat capacity and high stopping power to improve detector efficiency. To date, only Sn has been effective as an absorber, and speculation is that other materials suffer from anomalously high heat capacities at low temperatures. The key component of the measurement device is a 17 mm×17 mm low heat capacity silicon platform suspended by Kevlar fibers designed for accepting 1 g to 2 g samples, and whose heat capacity can be characterized prior to attaching a sample. The platform has a thin film Pd/Au heater deposited directly on the silicon, and a semiconducting thermometer bonded to the surface. The heat capacity is determined from C = Gτ, where G is the in-situ measured conductance and x is the measured temperature decay time from a step change in applied heat. For a platform without samples, decay periods on the order of 0.3 to 0.05 seconds were measured. With samples, decay periods of several seconds are projected, allowing good resolution of the heat capacities. Several thermometers were tested in an effort to find one with the optimum characteristics for measuring platform temperatures. These included a commercial thick-film Ruthenium-oxide surface-mount resistor, a germanium NTD, and a zirconium oxy-nitride thin-film thermometer.

  6. High-Capacity Spacesuit Evaporator Absorber Radiator (SEAR)

    NASA Technical Reports Server (NTRS)

    Izenson, Michael G.; Chen, Weibo; Phillips, Scott; Chepko, Ariane; Bue, Grant; Quinn, Gregory

    2015-01-01

    Future human space exploration missions will require advanced life support technology that can operate across a wide range of applications and environments. Thermal control systems for space suits and spacecraft will need to meet critical requirements for water conservation and multifunctional operation. This paper describes a Space Evaporator Absorber Radiator (SEAR) that has been designed to meet performance requirements for future life support systems. A SEAR system comprises a lithium chloride absorber radiator (LCAR) for heat rejection coupled with a space water membrane evaporator (SWME) for heat acquisition. SEAR systems provide heat pumping to minimize radiator size, thermal storage to accommodate variable environmental conditions, and water absorption to minimize use of expendables. We have built and tested a flight-like, high-capacity LCAR, demonstrated its performance in thermal vacuum tests, and explored the feasibility of an ISS demonstration test of a SEAR system. The new LCAR design provides the same cooling capability as prior LCAR prototypes while enabling over 30% more heat absorbing capacity. Studies show that it should be feasible to demonstrate SEAR operation in flight by coupling with an existing EMU on the space station.

  7. High-Capacity Spacesuit Evaporator Absorber Radiator (SEAR)

    NASA Technical Reports Server (NTRS)

    Izenson, Michael G.; Chen, Weibo; Phillips, Scott; Chepko, Ariane; Bue, Grant; Quinn, Gregory

    2014-01-01

    Future human space exploration missions will require advanced life support technology that can operate across a wide range of applications and environments. Thermal control systems for space suits and spacecraft will need to meet critical requirements for water conservation and adaptability to highly variable thermal environments. This paper describes a Space Evaporator Absorber Radiator (SEAR) that has been designed to meet performance requirements for future life support systems. A SEAR system comprises a lithium chloride absorber radiator (LCAR) for heat rejection coupled with a space water membrane evaporator (SWME) for heat acquisition. SEAR systems provide heat pumping to minimize radiator size, thermal storage to accommodate variable environmental conditions, and water absorption to minimize use of expendables. We have built and tested a flightlike, high-capacity LCAR, demonstrated its performance in thermal vacuum tests, and explored the feasibility of an ISS demonstration test of a SEAR system. The new LCAR design provides the same cooling capability as prior LCAR prototypes while enabling over 30% more heat absorbing capacity. Studies show that it should be feasible to demonstrate SEAR operation in flight by coupling with an existing EMU on the space station.

  8. Antioxidant capacity of different broccoli (Brassica oleracea) genotypes using the oxygen radical absorbance capacity (ORAC) assay.

    PubMed

    Kurilich, Anne C; Jeffery, Elizabeth H; Juvik, John A; Wallig, Matthew A; Klein, Barbara P

    2002-08-28

    Antioxidant capacity of hydrophilic and lipophilic extracts from eight broccoli genotypes was compared using the oxygen radical absorbance capacity (ORAC) assay. Each genotype was analyzed for carotenoid, tocopherol, ascorbic acid, and flavonoid content. Results indicate that the antioxidant capacity of hydrophilic extracts ranged from 65.8 to 121.6 micromol trolox equivalents (TE)/g of tissue, and the capacity of lipophilic extracts ranged from 3.9 to 17.5 micromol TE/g. Ascorbic acid and flavonoid content of the hydrophilic extracts did not explain the total variation in antioxidant capacity of those extracts, suggesting either the presence of other antioxidant components that have yet to be identified or that the known antioxidants are producing synergistic effects. The carotenoids did correlate with antioxidant capacity of the lipophilic extracts and accounted for the majority of the variability in that fraction. The variability in hydrophilic and lipophilic antioxidant capacity found among these genotypes suggests that potential efficacy from antioxidants will vary considerably from genotype to genotype.

  9. Methods of calculating radiation absorbed dose.

    PubMed

    Wegst, A V

    1987-01-01

    The new tumoricidal radioactive agents being developed will require a careful estimate of radiation absorbed tumor and critical organ dose for each patient. Clinical methods will need to be developed using standard imaging or counting instruments to determine cumulated organ activities with tracer amounts before the therapeutic administration of the material. Standard MIRD dosimetry methods can then be applied.

  10. Absorbing Software Testing into the Scrum Method

    NASA Astrophysics Data System (ADS)

    Tuomikoski, Janne; Tervonen, Ilkka

    In this paper we study, how to absorb software testing into the Scrum method. We conducted the research as an action research during the years 2007-2008 with three iterations. The result showed that testing can and even should be absorbed to the Scrum method. The testing team was merged into the Scrum teams. The teams can now deliver better working software in a shorter time, because testing keeps track of the progress of the development. Also the team spirit is higher, because the Scrum team members are committed to the same goal. The biggest change from test manager’s point of view was the organized Product Owner Team. Test manager don’t have testing team anymore, and in the future all the testing tasks have to be assigned through the Product Backlog.

  11. Method of absorbance correction in a spectroscopic heating value sensor

    SciTech Connect

    Saveliev, Alexei; Jangale, Vilas Vyankatrao; Zelepouga, Sergeui; Pratapas, John

    2013-09-17

    A method and apparatus for absorbance correction in a spectroscopic heating value sensor in which a reference light intensity measurement is made on a non-absorbing reference fluid, a light intensity measurement is made on a sample fluid, and a measured light absorbance of the sample fluid is determined. A corrective light intensity measurement at a non-absorbing wavelength of the sample fluid is made on the sample fluid from which an absorbance correction factor is determined. The absorbance correction factor is then applied to the measured light absorbance of the sample fluid to arrive at a true or accurate absorbance for the sample fluid.

  12. Heat Capacity Setup for Superconducting Bolometer Absorbers below 400 mK

    NASA Astrophysics Data System (ADS)

    Singh, V.; Mathimalar, S.; Dokania, N.; Nanal, V.; Pillay, R. G.; Ramakrishnan, S.

    2014-05-01

    A calorimeter set up with very low heat capacity (20 nJ/K at 100 mK) has been designed using commercial Carbon based resistors. This calorimeter is used to determine the heat capacity of small samples of superconducting bolometer absorbers. In particular, we present heat capacity studies of Tin, a bolometer candidate for Neutrinoless Double Beta Decay in Sn, in the temperature range of 60-400 mK.

  13. Multiresidue analysis of pesticides in vegetables and fruits using a high capacity absorbent polymer for water.

    PubMed

    Obana, H; Akutsu, K; Okihashi, M; Kakimoto, S; Hori, S

    1999-08-01

    A single extraction and a single clean-up procedure was developed for multi-residue analysis of pesticides in non-fatty vegetables and fruits. The method involves the use of a high capacity absorbent polymer for water as a drying agent in extraction from wet food samples and of a graphitized carbon column for clean-up. A homogeneously chopped food sample (20 g) and polymer (3 g) were mixed to absorb water from the sample and then 10 min later the mixture was vigorously extracted with ethyl acetate (100 ml). The extract (50 ml), separated by filtration, was loaded on a graphitized carbon column without concentration. Additional ethyl acetate (50 ml) was also eluted and both eluates were concentrated to 5 ml for analysis. The procedure for sample preparation was completed within 2 h. In a recovery test, 107 pesticides were spiked and average recoveries were more than 80% from asparagus, orange, potato and strawberry. Most pesticides were recovered in the range 70-120% with usually less than a 10% RSD for six experiments. The results indicated that a single extraction with ethyl acetate in the presence of polymer can be applied to the monitoring of pesticide residues in foods.

  14. Method for absorbing an ion from a fluid

    DOEpatents

    Gao, Huizhen; Wang, Yifeng; Bryan, Charles R.

    2007-07-03

    A method for absorbing an ion from a fluid by using dispersing an organic acid into an anion surfactant solution, mixing in a divalent-metal containing compound and a trivalent-metal containing compound and calcining the resulting solid layered double hydroxide product to form an absorbent material and then contacting the absorbent material with an aqueous solution of cations or anions to be absorbed.

  15. Schools' Capacity to Absorb a "Healthy School" Approach into Their Operations: Insights from a Realist Evaluation

    ERIC Educational Resources Information Center

    Deschesnes, Marthe; Drouin, Nathalie; Tessier, Caroline; Couturier, Yves

    2014-01-01

    Purpose: The purpose of this paper is to understand how a Canadian intervention based on a professional development (PD) model did or did not influence schools' capacities to absorb a Healthy School (HS) approach into their operations. This study is the second part of a research project: previously published results regarding this research…

  16. Neutron absorbers and methods of forming at least a portion of a neutron absorber

    SciTech Connect

    Guillen, Donna P; Porter, Douglas L; Swank, W David; Erickson, Arnold W

    2014-12-02

    Methods of forming at least a portion of a neutron absorber include combining a first material and a second material to form a compound, reducing the compound into a plurality of particles, mixing the plurality of particles with a third material, and pressing the mixture of the plurality of particles and the third material. One or more components of neutron absorbers may be formed by such methods. Neutron absorbers may include a composite material including an intermetallic compound comprising hafnium aluminide and a matrix material comprising pure aluminum.

  17. 21 CFR 886.3300 - Absorbable implant (scleral buckling method).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Absorbable implant (scleral buckling method). 886.3300 Section 886.3300 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... (scleral buckling method). (a) Identification. An absorbable implant (scleral buckling method) is a...

  18. 21 CFR 886.3300 - Absorbable implant (scleral buckling method).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Absorbable implant (scleral buckling method). 886.3300 Section 886.3300 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... (scleral buckling method). (a) Identification. An absorbable implant (scleral buckling method) is a...

  19. Container and method for absorbing and reducing hydrogen concentration

    DOEpatents

    Wicks, George G.; Lee, Myung W.; Heung, Leung K.

    2001-01-01

    A method for absorbing hydrogen from an enclosed environment comprising providing a vessel; providing a hydrogen storage composition in communication with a vessel, the hydrogen storage composition further comprising a matrix defining a pore size which permits the passage of hydrogen gas while blocking the passage of gaseous poisons; placing a material within the vessel, the material evolving hydrogen gas; sealing the vessel; and absorbing the hydrogen gas released into the vessel by the hydrogen storage composition. A container for absorbing evolved hydrogen gas comprising: a vessel having an interior and adapted for receiving materials which release hydrogen gas; a hydrogen absorbing composition in communication with the interior, the composition defining a matrix surrounding a hydrogen absorber, the matrix permitting the passage of hydrogen gas while excluding gaseous poisons; wherein, when the vessel is sealed, hydrogen gas, which is released into the vessel interior, is absorbed by the hydrogen absorbing composition.

  20. Numerical simulation of energy-absorbing capacity of metal sheet under penetration

    NASA Astrophysics Data System (ADS)

    Kaminishi, K.

    1997-07-01

    A finite element program employing a new explicit and consistent scheme for dynamic plasticity problems has been developed and deformation analysis of metal sheet under penetration has been carried out by this program. On the basis of this simulation, formulae for estimating the energy-absorbing capacity of thin metal sheet are proposed and the validity of this formulae has been shown numerically and experimentally.

  1. Method of absorbing UF.sub.6 from gaseous mixtures in alkamine absorbents

    DOEpatents

    Lafferty, Robert H.; Smiley, Seymour H.; Radimer, Kenneth J.

    1976-04-06

    A method of recovering uranium hexafluoride from gaseous mixtures employing as an absorbent a liquid composition at least one of the components of which is chosen from the group consisting of ethanolamine, diethanolamine, and 3-methyl-3-amino-propane-diol-1,2.

  2. Synthesis, oxygen radical absorbance capacity, and tyrosinase inhibitory activity of glycosides of resveratrol, pterostilbene, and pinostilbene.

    PubMed

    Uesugi, Daisuke; Hamada, Hiroki; Shimoda, Kei; Kubota, Naoji; Ozaki, Shin-Ichi; Nagatani, Naoki

    2017-02-01

    The stilbene compound resveratrol was glycosylated to give its 4'-O-β-D-glucoside as the major product in addition to its 3-O-β-D-glucoside by a plant glucosyltransferase from Phytolacca americana expressed in recombinant Escherichia coli. This enzyme transformed pterostilbene to its 4'-O-β-D-glucoside, and converted pinostilbene to its 4'-O-β-D-glucoside as a major product and its 3-O-β-D-glucoside as a minor product. An analysis of antioxidant capacity showed that the above stilbene glycosides had lower oxygen radical absorbance capacity (ORAC) values than those of the corresponding stilbene aglycones. The 3-O-β-D-glucoside of resveratrol showed the highest ORAC value among the stilbene glycosides tested, and pinostilbene had the highest value among the stilbene compounds. The tyrosinase inhibitory activities of the stilbene aglycones were improved by glycosylation; the stilbene glycosides had higher activities than the stilbene aglycones. Resveratrol 3-O-β-D-glucoside had the highest tyrosinase inhibitory activity among the stilbene compounds tested.

  3. Crash-Energy Absorbing Composite Structure and Method of Fabrication

    NASA Technical Reports Server (NTRS)

    Kellas, Sotiris (Inventor); Carden, Huey D. (Inventor)

    1998-01-01

    A stand-alone, crash-energy absorbing structure and fabrication method are provided. A plurality of adjoining rigid cells are each constructed of resin-cured fiber reinforcement and are arranged in a geometric configuration. The geometric configuration of cells is integrated by means of continuous fibers wrapped thereabout in order to maintain the cells in the geometric configuration. The cured part results in a net shape, stable structure that can function on its own with no additional reinforcement and can withstand combined loading while crushing in a desired direction.

  4. Scattering photoacoustic method in measurement of weakly absorbing turbid suspensions

    NASA Astrophysics Data System (ADS)

    Zhao, Zuomin; Törmänen, Matti; Myllylä, Risto

    2006-08-01

    Conventional photoacoustic techniques in composition determination and biomedical diagnose and imaging are based on the optical absorption in target substance or objects from which the photons to be scattered are not concerned. It is obvious that the intensities of scattered lights closely relate to the property of the interrogated substance, therefore measuring the signals produced by them can give rise to more information of the substance. Based on this idea, a novel method entitled scattering photoacoustic (SPA) method is put forward to study weak absorption suspensions with highly scattering. In this method, a near infrared pulse laser irradiates the studied object which contacts with external absorbers, resulting the generation of a few photoacoustic signals; one is produced in the studied object as conventional case, others are in external absorbers which are produced by the scattered photons. All these signals are successively received by a piezoelectric detector with short damping period. Analyzing these signals is capable of determining reduced scattered coefficient and absorption coefficient, as well as acoustic attenuation of studied suspensions. Some measurement results in intralipid and fibre (paper pulp) suspensions are given rise to in the end.

  5. Programmable flow system for automation of oxygen radical absorbance capacity assay using pyrogallol red for estimation of antioxidant reactivity.

    PubMed

    Ramos, Inês I; Gregório, Bruno J R; Barreiros, Luísa; Magalhães, Luís M; Tóth, Ildikó V; Reis, Salette; Lima, José L F C; Segundo, Marcela A

    2016-04-01

    An automated oxygen radical absorbance capacity (ORAC) method based on programmable flow injection analysis was developed for the assessment of antioxidant reactivity. The method relies on real time spectrophotometric monitoring (540 nm) of pyrogallol red (PGR) bleaching mediated by peroxyl radicals in the presence of antioxidant compounds within the first minute of reaction, providing information about their initial reactivity against this type of radicals. The ORAC-PGR assay under programmable flow format affords a strict control of reaction conditions namely reagent mixing, temperature and reaction timing, which are critical parameters for in situ generation of peroxyl radical from 2,2'-azobis(2-amidinopropane) dihydrochloride (AAPH). The influence of reagent concentrations and programmable flow conditions on reaction development was studied, with application of 37.5 µM of PGR and 125 mM of AAPH in the flow cell, guaranteeing first order kinetics towards peroxyl radicals and pseudo-zero order towards PGR. Peroxyl-scavenging reactivity of antioxidants, bioactive compounds and phenolic-rich beverages was estimated employing the proposed methodology. Recovery assays using synthetic saliva provided values of 90 ± 5% for reduced glutathione. Detection limit calculated using the standard antioxidant compound Trolox was 8 μM. RSD values were <3.4 and <4.9%, for intra and inter-assay precision, respectively. Compared to previous batch automated ORAC assays, the developed system also accounted for high sampling frequency (29 h(-1)), low operating costs and low generation of waste.

  6. A new bipyrrole and some phenolic constituents in prunes (Prunus domestica L.) and their oxygen radical absorbance capacity (ORAC).

    PubMed

    Kayano, Shin-ichi; Kikuzaki, Hiroe; Ikami, Takao; Suzuki, Tomoo; Mitani, Takahiko; Nakatani, Nobuji

    2004-04-01

    Isolation and structural elucidation of prune constituents were performed and total 10 compounds were determined by NMR and MS analyses. A novel compound was identified to be 2-(5-hydroxymethyl-2',5'-dioxo-2',3',4',5'-tetrahydro-1'H-1,3'-bipyrrole)carbaldehyde, and 7 phenolic compounds were isolated from prunes for the first time. In addition, antioxidant activity of them was evaluated on the basis of the oxygen radical absorbance capacity (ORAC).

  7. Boron-copper neutron absorbing material and method of preparation

    DOEpatents

    Wiencek, Thomas C.; Domagala, Robert F.; Thresh, Henry

    1991-01-01

    A composite, copper clad neutron absorbing material is comprised of copper powder and boron powder enriched with boron 10. The boron 10 content can reach over 30 percent by volume, permitting a very high level of neutron absorption. The copper clad product is also capable of being reduced to a thickness of 0.05 to 0.06 inches and curved to a radius of 2 to 3 inches, and can resist temperatures of 900.degree. C. A method of preparing the material includes the steps of compacting a boron-copper powder mixture and placing it in a copper cladding, restraining the clad assembly in a steel frame while it is hot rolled at 900.degree. C. with cross rolling, and removing the steel frame and further rolling the clad assembly at 650.degree. C. An additional sheet of copper can be soldered onto the clad assembly so that the finished sheet can be cold formed into curved shapes.

  8. The additive properties of Oxygen Radical Absorbance Capacity (ORAC) assay: the case of essential oils.

    PubMed

    Bentayeb, Karim; Vera, Paula; Rubio, Carlos; Nerín, Cristina

    2014-04-01

    The ORAC assay is applied to measure the antioxidant capacity of foods or dietary supplements. Sometimes, the manufacturers claim antioxidant capacities that may not correspond to the constituents of the product. These statements are sheltered by the general understanding that antioxidants might exhibit synergistic properties, but this is not necessarily true when dealing with ORAC assay values. This contribution applies the ORAC assay to measure the antioxidant capacity of ten essential oils typically added to foodstuffs: citronella, dill, basil, red thyme, thyme, rosemary, oregano, clove and cinnamon. The major components of these essential oils were twenty-one chemicals in total. After a preliminary discrimination, the antioxidant capacity of eugenol, carvacrol, thymol, α-pinene, limonene and linalool was determined. The results showed that 72-115% of the antioxidant capacity of the essential oils corresponded to the addition of the antioxidant capacity of their constituents. Thus, the ORAC assay showed additive properties.

  9. Dietary intake, neutrophil fatty acid profile, serum antioxidant vitamins and oxygen radical absorbance capacity in patients with ulcerative colitis.

    PubMed

    Kawakami, Yuko; Okada, Hiroyuki; Murakami, Yasuko; Kawakami, Takayo; Ueda, Yukiko; Kunii, Daisuke; Sakamoto, Yachiyo; Shiratori, Yasushi; Okita, Misako

    2007-04-01

    Nutrition may play an important role in the pathogenesis and treatment of ulcerative colitis. Several studies suggest an association between dietary factors and the onset of ulcerative colitis; however, only few studies have examined the relationship between dietary intake and relapse of ulcerative colitis. The aim of this study was to assess the dietary intake and antioxidative capacity of ulcerative colitis patients and to elucidate the efficacy of dietary therapy for ulcerative colitis. Dietary intake, fatty acid composition of phospholipids in plasma and neutrophils, serum fat-soluble vitamin levels, and oxygen radical absorbance capacity were analyzed in 29 ulcerative colitis patients (7 males and 22 females), who were treated at the Department of Gastroenterology, Okayama University Hospital. Total fat intake, fat energy ratio and linoleic acid intake were significantly lower, while protein and carbohydrate intakes were significantly higher, in the patients than age- and sex-matched controls. In the neutrophil phospholipids of ulcerative colitis patients, significantly higher levels of linoleic aicd and arachidonic acid and a lower level of eicosapentaenoic acid were observed. The concentrations of serum retinol and beta-carotene but not alpha-tocopherol were significantly lower and serum oxygen radical absorbance capacity was also lower than in the controls. Significant correlations between serum oxygen radical absorbance capacity and retinol (r = 0.567, p = 0.0031), alpha-tocopherol (r = 0.560, p = 0.0036) and beta-carotene (r = 0.440, p = 0.0279) concentrations were observed in the ulcerative colitis patients. A diet restricting the intake of linoleic acid and supplemented with eicosapentaenoic acid and antioxidative vitamins may be recommendable for the nutritional management of ulcerative colitis patients.

  10. A robust absorbing layer method for anisotropic seismic wave modeling

    SciTech Connect

    Métivier, L.; Brossier, R.; Labbé, S.; Operto, S.; Virieux, J.

    2014-12-15

    When applied to wave propagation modeling in anisotropic media, Perfectly Matched Layers (PML) exhibit instabilities. Incoming waves are amplified instead of being absorbed. Overcoming this difficulty is crucial as in many seismic imaging applications, accounting accurately for the subsurface anisotropy is mandatory. In this study, we present the SMART layer method as an alternative to PML approach. This method is based on the decomposition of the wavefield into components propagating inward and outward the domain of interest. Only outgoing components are damped. We show that for elastic and acoustic wave propagation in Transverse Isotropic media, the SMART layer is unconditionally dissipative: no amplification of the wavefield is possible. The SMART layers are not perfectly matched, therefore less accurate than conventional PML. However, a reasonable increase of the layer size yields an accuracy similar to PML. Finally, we illustrate that the selective damping strategy on which is based the SMART method can prevent the generation of spurious S-waves by embedding the source in a small zone where only S-waves are damped.

  11. Determination of oxygen radical absorbance capacity of black cumin (Nigella sativa) seed quinone compounds.

    PubMed

    Tesarova, Hana; Svobodova, Blanka; Kokoska, Ladislav; Marsik, Petr; Pribylova, Marie; Landa, Premysl; Vadlejch, Jaroslav

    2011-02-01

    In this study, the antioxidant capacities of main quinone constituents of Nigella sativa seeds, namely dithymoquinone (1), thymohydroquinone (2) and thymoquinone (3), were compared using DPPH and ORAC methods. The best scavenging activity was produced by 2, which showed a remarkable activity of 2.60 Trolox equivalents (TE) in a concentration range between 1.6 and 6.4 microg/mL and IC50 value of 2.4 microg/mL in ORAC and DPPH assays, respectively. Contrastingly, 3 possessed only weak DPPH scavenging efficacy (IC50 = 170 microg/mL) but significant antioxidative action of 1.91 TE in ORAC assay. No effect has been observed for 1. Additionally, modified protocol for synthesis of 2 has been developed with aim to enhance its availability for further studies as well as for its future potential use. Based on the results of this study, we conclude that 2 could be considered as a compound with prospective antioxidative properties.

  12. Improvement and Interlaboratory Validation of the Lipophilic Oxygen Radical Absorbance Capacity: Determination of Antioxidant Capacities of Lipophilic Antioxidant Solutions and Food Extracts.

    PubMed

    Watanabe, Jun; Oki, Tomoyuki; Takebayashi, Jun; Yada, Hiroshi; Wagaki, Manabu; Takano-Ishikawa, Yuko; Yasui, Akemi

    2016-01-01

    A lipophilic oxygen radical absorbance capacity (L-ORAC) assay is an evaluation of the antioxidant capacity of solutions of lipophilic compounds. The concentrations of fluorescein, radical generator, and Trolox standard solutions were optimized to improve the precision of the assay. An interlaboratory study using two antioxidant solutions and three food extracts as test samples conducted in accordance with harmonized protocol demonstrated satisfactory L-ORAC measurements; the intermediate precision relative standard deviations (RSD(int)) ranged from 7.0 to 16.7%, the reproducibility relative standard deviations (RSD(R)) ranged from 14.8 to 19.4%, and the HorRat values ranged from 1.35 to 1.78.

  13. A circuit method to integrate metamaterial and graphene in absorber design

    NASA Astrophysics Data System (ADS)

    Wang, Zuojia; Zhou, Min; Lin, Xiao; Liu, Huixia; Wang, Huaping; Yu, Faxin; Lin, Shisheng; Li, Erping; Chen, Hongsheng

    2014-10-01

    We theoretically investigate a circuit analog approach to integrate graphene and metamaterial in electromagnetic wave absorber design. In multilayer graphene-metamaterial (GM) absorbers, ultrathin metamaterial elements are theoretically modeled as equivalent loads which attached to the junctions between two transmission lines. Combining with the benefits of tunable chemical potential in graphene, an optimized GM absorber is proposed as a proof of the circuit method. Numerical simulation results demonstrate the effectiveness of the circuit analytical model. The operating frequency of the GM absorber can be varied in terahertz frequency, indicating the potential applications of the GM absorber in sensors, modulators, and filters.

  14. Methods for applying microchannels to separate methane using liquid absorbents, especially ionic liquid absorbents from a mixture comprising methane and nitrogen

    DOEpatents

    Tonkovich, Anna Lee Y.; Litt, Robert D.; Dongming, Qiu; Silva, Laura J.; Lamont, Micheal Jay; Fanelli, Maddalena; Simmons, Wayne W.; Perry, Steven

    2011-10-04

    Methods of using microchannel separation systems including absorbents to improve thermal efficiency and reduce parasitic power loss. Energy is typically added to desorb methane and then energy or heat is removed to absorb methane using a working solution. The working solution or absorbent may comprise an ionic liquid, or other fluids that demonstrate a difference in affinity between methane and nitrogen in a solution.

  15. Effects of oolong tea on plasma antioxidative capacity in mice loaded with restraint stress assessed using the oxygen radical absorbance capacity (ORAC) assay.

    PubMed

    Kurihara, Hiroshi; Fukami, Harukazu; Asami, Sumio; Toyoda, Yoshiko; Nakai, Masaaki; Shibata, Hiroshi; Yao, Xin-Sheng

    2004-07-01

    In the present study, we investigated the antioxidative effect of oolong tea in vitro and in vivo using the oxygen radical absorbance capacity (ORAC) assay. An oolong tea extract, catechin and related compounds suppressed the oxidation of fluorescence induced by AAPH in a dose-dependent manner, that is, they prolonged the antioxidant time in vitro. Oral administration of the oolong tea extract to mice treated with restraint stress increased ORAC activity in plasma as compared with a stress control group. The extract also increased plasma vitamin C levels, and there was a good relationship between ORAC activity and the vitamin C level in plasma. The elevation of plasma ORAC and vitamin C level may have been related to the stress-relieving effect of oolong tea. These effects are probably due to the antioxidative properties of the tea. Thus, these findings suggested that oolong tea has beneficial effects on health related to its antioxidative action.

  16. Evaluation of synergistic antioxidant potential of complex mixtures using oxygen radical absorbance capacity (ORAC) and electron paramagnetic resonance (EPR).

    PubMed

    Parker, Tory L; Miller, Samantha A; Myers, Lauren E; Miguez, Fernando E; Engeseth, Nicki J

    2010-01-13

    Previous research has demonstrated that certain combinations of compounds result in a decrease in toxic or pro-oxidative effects, previously noted when compounds were administered singly. Thus, there is a need to study many complex interactions further. Two in vitro techniques [electron paramagnetic resonance (EPR) and oxygen radical absorbance capacity (ORAC) assays] were used in this study to assess pro- and antioxidant capacity and synergistic potential of various compounds. Rutin, p-coumaric acid, abscisic acid, ascorbic acid, and a sugar solution were evaluated individually at various concentrations and in all 26 possible combinations at concentrations found in certain foods (honey or papaya), both before and after simulated digestion. EPR results indicated sugar-containing combinations provided significantly higher antioxidant capacity; those combinations containing sugars and ascorbic acid demonstrated synergistic potential. The ORAC assay suggested additive effects, with some combinations having synergistic potential, although fewer combinations were significantly synergistic after digestion. Finally, ascorbic acid, caffeic acid, quercetin, and urate were evaluated at serum-achievable levels. EPR analysis did not demonstrate additive or synergistic potential, although ORAC analysis did, principally in combinations containing ascorbic acid.

  17. Oxygen radical absorbing capacity of phenolics in blueberries, cranberries, chokeberries, and lingonberries.

    PubMed

    Zheng, Wei; Wang, Shiow Y

    2003-01-15

    The antioxidant activity of phenolics in fruits of blueberry (Vaccinium corymbosum cv. Sierra), cranberry (Vaccinium macrocarpon cv. Ben Lear), wild chokeberry (Aronia melanocarpa), and lingonberry (Vaccinium vitis-idaea cv. Amberland) was determined in this study. The phenolic constituents and contents among the different berries varied considerably. Anthocyanins were found to be the main components in all these berries. Chlorogenic acid in blueberry, quercetin glycosides in cranberry and lingonberry, and caffeic acid and its derivative in chokeberry were also present in relatively high concentrations. Chlorogenic acid, peonidin 3-galactoside, cyanidin 3-galactoside, and cyanidin 3-galactoside were the most important antioxidants in blueberry, cranberry, wild chokeberry, and lingonberry, respectively. The contribution of individual phenolics to the total antioxidant capacity was generally dependent on their structure and content in the berries. Phenolics such as quercetin and cyanidin, with 3',4'-dihydroxy substituents in the B ring and conjugation between the A and B rings, had highly effective radical scavenging structures in blueberries, cranberries, chokeberries, and lingonberries. Phenolic acids such as caffeic acid also showed high antioxidant activity, probably due to its dihydroxylation in the 3,4 positions as hydrogen donors.

  18. Dietary quebracho tannins are not absorbed, but increase the antioxidant capacity of liver and plasma in sheep.

    PubMed

    López-Andrés, Patricia; Luciano, Giuseppe; Vasta, Valentina; Gibson, Trevor M; Biondi, Luisa; Priolo, Alessandro; Mueller-Harvey, Irene

    2013-08-01

    A total of sixteen lambs were divided into two groups and fed two different diets. Of these, eight lambs were fed a control diet (C) and eight lambs were fed the C diet supplemented with quebracho tannins (C+T). The objective of the present study was to assess whether dietary quebracho tannins can improve the antioxidant capacity of lamb liver and plasma and if such improvement is due to a direct transfer of phenolic compounds or their metabolites, to the animal tissues. Feed, liver and plasma samples were purified by solid-phase extraction (SPE) and analysed by liquid chromatography-MS for phenolic compounds. Profisitinidin compounds were identified in the C+T diet. However, no phenolic compounds were found in lamb tissues. The liver and the plasma from lambs fed the C+T diet displayed a greater antioxidant capacity than tissues from lambs fed the C diet, but only when samples were not purified with SPE. Profisetinidin tannins from quebracho seem not to be degraded or absorbed in the gastrointestinal tract. However, they induced antioxidant effects in animal tissues.

  19. Occurrence of UV-Absorbing, Mycosporine-Like Compounds among Cyanobacterial Isolates and an Estimate of Their Screening Capacity

    PubMed Central

    Garcia-Pichel, Ferran; Castenholz, Richard W.

    1993-01-01

    A survey of 20 strains of cyanobacteria (belonging to 13 genera) isolated from habitats exposed to strong insolation revealed that 13 strains contained one or more water-soluble, UV-absorbing, mycosporine amino acid (MAA)-like compounds. Some of the compounds were identical in several strains. In all, 13 distinct compounds were found. The UV absorption spectra of MAAs complemented well that of the extracellular sunscreen pigment scytonemin, which many of the strains also produced. Even though the specific MAA contents were variable among strains, they were invariably higher when the cultures were grown with UV radiation than when it was absent. In five strains tested, the MAA complement accumulated as a solute in the cytoplasmic cell fraction. The sunscreen capacities of MAA and scytonemin and their combined capacity were estimated for each strain and condition on the basis of the specific contents, cell size, and cellular location of the compounds. The estimates suggested that significant, albeit not complete, protection from UV photodamage could be gained from the possession of either MAA or scytonemin but especially from simultaneous screening by both types of compounds. PMID:16348839

  20. Amine-functionalized amino acid-based ionic liquids as efficient and high-capacity absorbents for CO(2).

    PubMed

    Saravanamurugan, Shunmugavel; Kunov-Kruse, Andreas J; Fehrmann, Rasmus; Riisager, Anders

    2014-03-01

    Ionic liquids (ILs) comprised of ammonium cations and anions of naturally occurring amino acids containing an additional amine group (e.g., lysine, histidine, asparagine, and glutamine) were examined as high-capacity absorbents for CO2. An absorption capacity of 2.1 mol CO2 per mol of IL (3.5 mol CO2 per kg IL, 13.1 wt% CO2) was measured for [N66614][Lys] at ambient temperature and about 1 mol CO2 per mol of IL at 808C (under 1 bar of CO2). This demonstrated that desorption is possible under CO2-rich conditions by temperature-swing absorption; three consecutive sorption cycles were performed with the IL. The mechanistic and kinetic study of the absorption process was further substantiated by NMR spectroscopy and in situ attenuated total reflectance FTIR for [N66614][Lys] and the homologous phosphonium-based IL [P66614][Lys]. This study revealed that carbamic acid was formed with CO2 in both ILs by chemisorption; however, the amino acid–carboxyl groups on the anion played an important—but different—catalytic role for the sorption kinetics in the two ILs. The origin of the cationic effect is speculated to be correlated with the strength of the ion interactions in the two ILs.

  1. Combination of UV absorbance and electron donating capacity to assess degradation of micropollutants and formation of bromate during ozonation of wastewater effluents.

    PubMed

    Chon, Kangmin; Salhi, Elisabeth; von Gunten, Urs

    2015-09-15

    In this study, the changes in UV absorbance at 254 nm (UVA254) and electron donating capacity (EDC) were investigated as surrogate indicators for assessing removal of micropollutants and bromate formation during ozonation of wastewater effluents. To measure the EDC, a novel method based on size exclusion chromatography followed by a post-column reaction was developed and calibrated against an existing electrochemical method. Low specific ozone doses led to a more efficient abatement of EDC than of UVA254. This was attributed to the abatement of phenolic moieties in the dissolved organic matter (DOM), which lose their EDC upon oxidation, but are partially transformed into quinones, which still absorb in the measured UV range. For higher specific ozone doses, the relative EDC abatement was lower than the relative UVA abatement, which can be explained by the oxidation of UV absorbing moieties (e.g. non-activated aromatic compounds), which contribute less to EDC. The abatement of the selected micropollutants (i.e., 17α-ethinylestradiol (EE2), carbamazepine (CBZ), atenolol (ATE), bezafibrate (BZF), ibuprofen (IBU), and p-chlorobenzoic acid (pCBA)) varied significantly depending on their reactivity with ozone in the examined specific ozone dose range of 0-1.45 mgO3/mgDOC. The decrease of EE2 and CBZ with high ozone reactivity was linearly proportional to the reduction of the relative residuals of UVA254 and EDC. The abatement of ATE, BZF, IBU, and pCBA with intermediate to low ozone reactivities was not significant in a first phase (UVA254/UVA254,0 = 1.00-0.70; EDC/EDC0 = 1.00-0.56) while their abatement was more efficient than the degradation of the relative residual UVA254 and much more noticeable than the degradation of the relative residual EDC in a second phase (UVA254/UVA254,0 = 0.70-0.25; EDC/EDC0 = 0.56-0.25) because the partially destroyed UV absorbing and electron donating DOM moieties become recalcitrant to ozone attack. Bromate formation was

  2. Numerical wave tank based on a conserved wave-absorbing method

    NASA Astrophysics Data System (ADS)

    Hu, Zhe; Tang, Wen-yong; Xue, Hong-xiang; Zhang, Xiao-ying

    2016-03-01

    Recently the numerical wave tank has become a widely-used tool to study waves as well as wave-structure interactions, and the wave-absorbing method is very important as its effect on the quality of waves generated. The relaxation method and the derived momentum source method are often utilized, however, the damping weight is constant during calculation and repeated trials are required to obtain an acceptable wave-absorbing effect. To address the abovementioned issues, a conserved wave-absorbing method is developed. The damping weight is determined by solving the mass conservation equation of the absorbing region at every time step. Based on this method, a two-dimensional numerical wave tank is established by using the VB language to simulate various waves by which the validation of this method is evaluated.

  3. Method of Synthesizing a Novel Absorbent Titanosilicate Material (UPRM-5)

    NASA Technical Reports Server (NTRS)

    Hernandez-Maldonado, Arturo (Inventor); Primera-Pedrozo, Jose N (Inventor)

    2013-01-01

    A titanium silicate variant named UPRM-5 was prepared using tetraethylammonium hydroxide as a structure-directing agent (SDA). Successful detemplation was achieved via ion exchange with NH4Cl. Effective functionalization was obtained after ion exchanging the detemplated material using SrCl2 and BaCl2. Adsorption of CO2 at 25 deg C in Sr(-) and Ba-UPRM-5 materials activated at different temperatures. For low partial pressures, the observed CO2 adsorption capacities increased as follows: NH4-UPRM-5 less than Sr-UPRM-5 less than Ba-UPRM-5. Both the Sr(-) and Ba-UPRM-5 materials exhibited outstanding selectivity for CO2 over CH4, N2 and O2.

  4. Refrigerator with variable capacity compressor and cycle priming action through capacity control and associated methods

    DOEpatents

    Gomes, Alberto Regio; Litch, Andrew D.; Wu, Guolian

    2016-03-15

    A refrigerator appliance (and associated method) that includes a condenser, evaporator and a multi-capacity compressor. The appliance also includes a pressure reducing device arranged within an evaporator-condenser refrigerant circuit, and a valve system for directing or restricting refrigerant flow through the device. The appliance further includes a controller for operating the compressor upon the initiation of a compressor ON-cycle at a priming capacity above a nominal capacity for a predetermined or calculated duration.

  5. Superhydrophobic hBN-Regulated Sponges with Excellent Absorbency Fabricated Using a Green and Facile Method.

    PubMed

    Zhou, Ying; Wang, Yao; Liu, Tengfei; Xu, Gang; Chen, Guangming; Li, Huayi; Liu, Lichun; Zhuo, Qiqi; Zhang, Jiaoxia; Yan, Chao

    2017-03-23

    The world faces severe environmental, human and ecological problems when major oil spills and organic discharges are released into the environment. And so it is imperative to develop tools and high performance innovative materials that can efficiently absorb these organic discharges. Furthermore, green, facile methods to produce these advanced materials are also needed. In this paper, we demonstrate a novel porous supersponge based on melamine coated with hBN. This superhydrophobic sponge (with a contact angle >150°) exhibits excellent absorption performance for oils and organic solvents, including good selectivity, high capacity (up to 175 g·g(-1)) and extraordinary recyclability (less than 20% decline after 30 cycles of absorption/squeezing). The synthetic procedure required only ultrasonication and immersion of the sponge in aqueous hBN solution, being a green, cost-effective and scalable production methodology. By virtue of the straightforward and cost-effective fabrication method, along with the excellent absorption performance, hBN-decorated sponges have great promise for real world practical application in the field of oil spills and organic leakage cleanup.

  6. Superhydrophobic hBN-Regulated Sponges with Excellent Absorbency Fabricated Using a Green and Facile Method

    PubMed Central

    Zhou, Ying; Wang, Yao; Liu, Tengfei; Xu, Gang; Chen, Guangming; Li, Huayi; Liu, Lichun; Zhuo, Qiqi; Zhang, Jiaoxia; Yan, Chao

    2017-01-01

    The world faces severe environmental, human and ecological problems when major oil spills and organic discharges are released into the environment. And so it is imperative to develop tools and high performance innovative materials that can efficiently absorb these organic discharges. Furthermore, green, facile methods to produce these advanced materials are also needed. In this paper, we demonstrate a novel porous supersponge based on melamine coated with hBN. This superhydrophobic sponge (with a contact angle >150°) exhibits excellent absorption performance for oils and organic solvents, including good selectivity, high capacity (up to 175 g·g−1) and extraordinary recyclability (less than 20% decline after 30 cycles of absorption/squeezing). The synthetic procedure required only ultrasonication and immersion of the sponge in aqueous hBN solution, being a green, cost-effective and scalable production methodology. By virtue of the straightforward and cost-effective fabrication method, along with the excellent absorption performance, hBN-decorated sponges have great promise for real world practical application in the field of oil spills and organic leakage cleanup. PMID:28332612

  7. Superhydrophobic hBN-Regulated Sponges with Excellent Absorbency Fabricated Using a Green and Facile Method

    NASA Astrophysics Data System (ADS)

    Zhou, Ying; Wang, Yao; Liu, Tengfei; Xu, Gang; Chen, Guangming; Li, Huayi; Liu, Lichun; Zhuo, Qiqi; Zhang, Jiaoxia; Yan, Chao

    2017-03-01

    The world faces severe environmental, human and ecological problems when major oil spills and organic discharges are released into the environment. And so it is imperative to develop tools and high performance innovative materials that can efficiently absorb these organic discharges. Furthermore, green, facile methods to produce these advanced materials are also needed. In this paper, we demonstrate a novel porous supersponge based on melamine coated with hBN. This superhydrophobic sponge (with a contact angle >150°) exhibits excellent absorption performance for oils and organic solvents, including good selectivity, high capacity (up to 175 g·g‑1) and extraordinary recyclability (less than 20% decline after 30 cycles of absorption/squeezing). The synthetic procedure required only ultrasonication and immersion of the sponge in aqueous hBN solution, being a green, cost-effective and scalable production methodology. By virtue of the straightforward and cost-effective fabrication method, along with the excellent absorption performance, hBN-decorated sponges have great promise for real world practical application in the field of oil spills and organic leakage cleanup.

  8. Influence of extraction solvent on antioxidant capacity value of oleaster measured by ORAC method.

    PubMed

    Yalcin, Gorkem; Sogut, Ozlem

    2014-01-01

    Oxygen radical absorbance capacity (ORAC) is a widely used hydrogen atom transfer-based method which measures the antioxidant capacity of natural products. ORAC values of oleaster (Elaeagnus angustifolia L.), which was extracted with ethanol/acetone (7:3, v/v), ethanol/water (1:1, v/v) and methanol/water (1:1, v/v) in order to evaluate the effects of solvent type on antioxidant capacity, were examined. In general, results revealed that ethanol/water extracts exhibited better antioxidant capacity values. Furthermore, results obtained by using ORAC-eosin y (ORAC-EY), one of the widely used derivative of fluorescein (FL), as a fluorescent probe were compared with those obtained by using ORAC-FL. According to the results, ORAC-EY values were found to be compatible with ORAC-FL values.

  9. Synthesis of Numerical Methods for Modeling Wave Energy Converter-Point Absorbers: Preprint

    SciTech Connect

    Li, Y.; Yu, Y. H.

    2012-05-01

    During the past few decades, wave energy has received significant attention among all ocean energy formats. Industry has proposed hundreds of prototypes such as an oscillating water column, a point absorber, an overtopping system, and a bottom-hinged system. In particular, many researchers have focused on modeling the floating-point absorber as the technology to extract wave energy. Several modeling methods have been used such as the analytical method, the boundary-integral equation method, the Navier-Stokes equations method, and the empirical method. However, no standardized method has been decided. To assist the development of wave energy conversion technologies, this report reviews the methods for modeling the floating-point absorber.

  10. Detection of Organic Compounds in Water by an Optical Absorbance Method

    PubMed Central

    Kim, Chihoon; Eom, Joo Beom; Jung, Soyoun; Ji, Taeksoo

    2016-01-01

    This paper proposes an optical method which allows determination of the organic compound concentration in water by measurement of the UV (ultraviolet) absorption at a wavelength of 250 nm~300 nm. The UV absorbance was analyzed by means of a multiple linear regression model for estimation of the total organic carbon contents in water, which showed a close correlation with the UV absorbance, demonstrating a high adjusted coefficient of determination, 0.997. The comparison of the TOC (total organic carbon) concentrations for real samples (tab water, sea, and river) calculated from the UV absorbance spectra, and those measured by a conventional TOC analyzer indicates that the higher the TOC value the better the agreement. This UV absorbance method can be easily configured for real-time monitoring water pollution, and built into a compact system applicable to industry areas. PMID:26742043

  11. Carbon dioxide absorbent and method of using the same

    DOEpatents

    Perry, Robert James; Lewis, Larry Neil; O'Brien, Michael Joseph; Soloveichik, Grigorii Lev; Kniajanski, Sergei; Lam, Tunchiao Hubert; Lee, Julia Lam; Rubinsztajn, Malgorzata Iwona

    2011-10-04

    In accordance with one aspect, the present invention provides an amino-siloxane composition comprising at least one of structures I, II, III, IV or V said compositions being useful for the capture of carbon dioxide from gas streams such as power plant flue gases. In addition, the present invention provides methods of preparing the amino-siloxane compositions are provided. Also provided are methods for reducing the amount of carbon dioxide in a process stream employing the amino-siloxane compositions of the invention as species which react with carbon dioxide to form an adduct with carbon dioxide. The reaction of the amino-siloxane compositions provided by the present invention with carbon dioxide is reversible and thus, the method provides for multicycle use of said compositions.

  12. Carbon dioxide absorbent and method of using the same

    SciTech Connect

    Perry, Robert James; O'Brien, Michael Joseph

    2014-06-10

    In accordance with one aspect, the present invention provides a composition which contains the amino-siloxane structures I, or III, as described herein. The composition is useful for the capture of carbon dioxide from process streams. In addition, the present invention provides methods of preparing the amino-siloxane composition. Another aspect of the present invention provides methods for reducing the amount of carbon dioxide in a process stream employing the amino-siloxane compositions of the invention, as species which react with carbon dioxide to form an adduct with carbon dioxide.

  13. Carbon dioxide absorbent and method of using the same

    SciTech Connect

    Perry, Robert James; O'Brien, Michael Joseph

    2015-12-29

    In accordance with one aspect, the present invention provides a composition which contains the amino-siloxane structures I, or III, as described herein. The composition is useful for the capture of carbon dioxide from process streams. In addition, the present invention provides methods of preparing the amino-siloxane composition. Another aspect of the present invention provides methods for reducing the amount of carbon dioxide in a process stream employing the amino-siloxane compositions of the invention, as species which react with carbon dioxide to form an adduct with carbon dioxide.

  14. Carotenoid analysis using the puree absorbance method for germplasm screening

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Many fruits and vegetables contain health-promoting compounds which require labor intensive analyses to detect. This is the case with quantifying carotenoids in fresh fruits and vegetables. Carotenoid content can vary significantly between varieties; therefore a method to rapidly screen germplasm ...

  15. Method of using a diatomaceous earth containing absorbent

    SciTech Connect

    Wollrich, G.W.

    1993-05-25

    A method of adsorbing petroleum oil from a petroleum oil containing material is described which comprises contacting said material with an effective amount of an adsorbent composition consisting essentially of sugar, vinegar, and diatomaceous earth combined in relative amounts which result in a composition capable of effectively adsorbing petroleum oil.

  16. Abscisic acid related compounds and lignans in prunes (Prunus domestica L.) and their oxygen radical absorbance capacity (ORAC).

    PubMed

    Kikuzaki, Hiroe; Kayano, Shin-ichi; Fukutsuka, Naoko; Aoki, Asuka; Kasamatsu, Kumi; Yamasaki, Yuka; Mitani, Takahiko; Nakatani, Nobuji

    2004-01-28

    Four new abscisic acid related compounds (1-4), together with (+)-abscisic acid (5), (+)-beta-D-glucopyranosyl abscisate (6), (6S,9R)-roseoside (7), and two lignan glucosides ((+)-pinoresinol mono-beta-D-glucopyranoside (8) and 3-(beta-D-glucopyranosyloxymethyl)-2- (4-hydroxy-3-methoxyphenyl)-5-(3-hydroxypropyl)-7-methoxy-(2R,3S)-dihydrobenzofuran (9)) were isolated from the antioxidative ethanol extract of prunes (Prunus domestica L.). The structures of 1-4 were elucidated on the basis of NMR and MS spectrometric data to be rel-5-(3S,8S-dihydroxy-1R,5S-dimethyl-7-oxa-6-oxobicyclo[3,2,1]oct-8-yl)-3-methyl-2Z,4E-pentadienoic acid (1), rel-5-(3S,8S-dihydroxy-1R,5S-dimethyl-7-oxa-6-oxobicyclo[3,2,1]oct-8-yl)-3-methyl-2Z,4E-pentadienoic acid 3'-O-beta-d-glucopyranoside (2), rel-5-(1R,5S-dimethyl-3R,4R,8S-trihydroxy-7-oxa-6-oxobicyclo[3,2,1]oct-8-yl)-3-methyl-2Z,4E-pentadienoic acid (3), and rel-5-(1R,5S-dimethyl-3R,4R,8S-trihydroxy-7-oxabicyclo[3,2,1]- oct-8-yl)-3-methyl-2Z,4E-pentadienoic acid (4). The antioxidant activities of these isolated compounds were evaluated on the basis of oxygen radical absorbance capacity (ORAC). The ORAC values of abscisic acid related compounds (1-7) were very low. Two lignans (8 and 9) were more effective antioxidants whose ORAC values were 1.09 and 2.33 micromol of Trolox equiv/micromol, respectively.

  17. Hybrid mode-scattering/sound-absorbing segmented liner system and method

    NASA Technical Reports Server (NTRS)

    Rice, Edward J. (Inventor); Walker, Bruce E. (Inventor); Hersh, Alan S. (Inventor)

    1999-01-01

    A hybrid mode-scattering/sound-absorbing segmented liner system and method in which an initial sound field within a duct is steered or scattered into higher-order modes in a first mode-scattering segment such that it is more readily and effectively absorbed in a second sound-absorbing segment. The mode-scattering segment is preferably a series of active control components positioned along the annulus of the duct, each of which includes a controller and a resonator into which a piezoelectric transducer generates the steering noise. The sound-absorbing segment is positioned acoustically downstream of the mode-scattering segment, and preferably comprises a honeycomb-backed passive acoustic liner. The invention is particularly adapted for use in turbofan engines, both in the inlet and exhaust.

  18. Preparation of Cu2ZnSnSe4 Absorber Layer by Nonvacuum Method

    NASA Astrophysics Data System (ADS)

    Liu, Shang-En; Lin, Yu-Hsuan; Huang, Hou-Ying

    2013-12-01

    Cu2ZnSnSe4 (CZTSe) was prepared by a nonvacuum, solution-based method, and used as an absorber layer in CZTSe solar cells. Copper(II) acetate monohydrate, zinc(II) acetate dehydrate, and tin(II) chloride dihydrate were used as the starting materials of the sol-gel method, and 2-methoxyethanol and monoethanolamine were used as the solvent and stabilizer, respectively. The precursor solution was deposited on Mo-coated soda lime glass (SLG) by spin-coating, then annealed at 570 °C in selenium atmosphere to convert it into the CZTSe absorber layer. The synthesized CZTSe absorber layer phase was identified by X-ray diffraction (XRD) and Raman spectrum analyses. By increasing the number of spin-coating/drying cycles, the CZTSe absorber layer thickness was increased and resulted in a current density increase in the current-voltage curve. Scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) were carried out to confirm the absorber layer thickness and metal ratios. The highest efficiency of the solar cell was 1.08% with a 1.45 µm absorber layer.

  19. [Determination of chemical oxygen demand in water using near infrared transmission and UV absorbance method].

    PubMed

    Wu, Guo-Qing; Bi, Wei-Hong; Lui, Jia-Ming; Fu, Guang-Wei

    2011-06-01

    Chemical oxygen demand (COD) is a synthetical indicator which represents the degree of organic pollution in water. The near-infrared (NIR) transmission and the UV absorbance method based on photoelectric detection technology and spectroscopy analysis have some advantages such as high precision, speed, non-contact, no secondary pollution etc compared to conventional wet chemical method. The NIR transmission spectra and UV absorbance spectra of standard solution configured with phthalate hydrogen potassium were collected respectively by MPA FTIR spectrometer (Bruker Optics Inc.) made in Germany and AvaSpec-2048-2 UV spectrometer (Avantes Inc.) made in Netherlands. After different pretreatment to the spectra, COD quantitative analysis model was established using partial least squares regression (PLS) and linear regression. The statistical analysis of COD quantitative model was implemented, and the result showed that UV absorbance method had a higher relevance but lower forecast accuracy and precision than NIR transmission method.

  20. Generator-Absorber heat exchange transfer apparatus and method using an intermediate liquor

    DOEpatents

    Phillips, Benjamin A.; Zawacki, Thomas S.

    1996-11-05

    Numerous embodiments and related methods for generator-absorber heat exchange (GAX) are disclosed, particularly for absorption heat pump systems. Such embodiments and related methods use the working solution of the absorption system for the heat transfer medium where the working solution has an intermediate liquor concentration.

  1. Absorbance correction method for estimation of telmisartan and metoprolol succinate in combined tablet dosage forms

    PubMed Central

    Patel, Komal; Patel, Amit; Dave, Jayant; Patel, Chaganbhai

    2012-01-01

    Aim and Background: The present manuscript describes simple, sensitive, rapid, accurate, precise and economical spectrophotometric method for the simultaneous determination of telmisartan and metoprolol succinate in combined tablet dosage form. Materials and Methods: The method is based on the absorbance correction equations for analysis of both the drugs using methanol as solvent. Telmisartan has absorbance maxima at 296 nm and metoprolol succinate has absorbance maxima at 223 nm in methanol. The linearity was obtained in the concentration range of 2-16 μg/ ml and 3-24 μg/ml for telmisartan and metoprolol succinate, respectively. The concentrations of the drugs were determined by using absorbance correction method at both the wavelengths. The method was successfully applied to pharmaceutical dosage form because no interference from the tablet excipients was found. The suitability of this method for the quantitative determination of telmisartan and metoprolol succinate was proved by validation. The proposed method was found to be simple and sensitive for the quality control application of telmisartan and metoprolol succinate in pharmaceutical dosage form. Result: The result of analysis has been validated statistically and by recovery studies. Recoveries were found in the range of 98.08-100.55% of telmisartan and 98.41-101.87% of metoprolol succinate. PMID:23781489

  2. High-throughput methods to assess lipophilic and hydrophilic antioxidant capacity of food extracts in vitro.

    PubMed

    Jimenez-Alvarez, D; Giuffrida, F; Vanrobaeys, F; Golay, P A; Cotting, C; Lardeau, A; Keely, Brendan J

    2008-05-28

    Assays comprising three probes for different mechanisms of antioxidant activity in food products have been modified to allow better comparison of the contributions of the different mechanisms to antioxidant capacity (AOC). Incorporation of a common format for oxygen radical absorbance capacity (ORAC), ferric reducing antioxidant power (FRAP), and iron(II) chelating activity (ICA) assays using 96-well microplates provides a comprehensive and high-throughput assessment of the antioxidant capacity of food extracts. The methods have been optimized for aqueous extracts and validated in terms of limit of quantification (LoQ), linearity, and precision (repeatability and intermediate reproducibility). In addition, FRAP and ORAC assays have been validated to assess AOC for lipophilic extracts. The relative standard deviation of repeatability of the methods ranges from 1.2 to 6.9%, which is generally considered to be acceptable for analytical measurement of AOC by in vitro methods. Radical scavenging capacity, reducing capacity, and iron chelating properties of olive mill wastewaters (OMWW), oregano, and parsley were assessed using the validated methods. OMWW showed the highest radical scavenging and reducing capacities, determined by ORAC and FRAP assays, respectively, followed by oregano and parsley. The ability to chelate Fe (2+) was, in decreasing order of activity ( p > 0.05) parsley congruent with oregano > OMWW. Total phenol content, determined by the Folin-Ciocalteu method, correlated to the radical scavenging and reducing capacities of the samples but not to their chelating properties. Results showed that the optimized high-throughput methods provided a comprehensive and precise determination of the AOC of lipophilic and hydrophilic food extracts in vitro.

  3. Liquid carbon dioxide absorbents, methods of using the same, and related systems

    DOEpatents

    O'Brien, Michael Joseph; Perry, Robert James; Lam, Tunchiao Hubert; Soloveichik, Grigorii Lev; Kniajanski, Sergei; Lewis, Larry Neil; Rubinsztajn, Malgorzata Iwona; Hancu, Dan

    2016-09-13

    A carbon dioxide absorbent composition is described, including (i) a liquid, nonaqueous silicon-based material, functionalized with one or more groups that either reversibly react with CO.sub.2 or have a high-affinity for CO.sub.2; and (ii) a hydroxy-containing solvent that is capable of dissolving both the silicon-based material and a reaction product of the silicon-based material and CO.sub.2. The absorbent may be utilized in methods to reduce carbon dioxide in an exhaust gas, and finds particular utility in power plants.

  4. Synthesis of porous-acoustic absorbing systems by an evolutionary optimization method

    NASA Astrophysics Data System (ADS)

    Silva, F. I.; Pavanello, R.

    2010-10-01

    Topology optimization is frequently used to design structures and acoustic systems in a large range of engineering applications. In this work, a method is proposed for maximizing the absorbing performance of acoustic panels by using a coupled finite element model and evolutionary strategies. The goal is to find the best distribution of porous material for sound absorbing panels. The absorbing performance of the porous material samples in a Kundt tube is simulated using a coupled porous-acoustic finite element model. The equivalent fluid model is used to represent the foam material. The porous material model is coupled to a wave guide using a modal superposition technique. A sensitivity number indicating the optimum locations for porous material to be removed is derived and used in a numerical hard kill scheme. The sensitivity number is used to form an evolutionary porous material optimization algorithm which is verified through examples.

  5. Improved Method for Determining the Heat Capacity of Metals

    ERIC Educational Resources Information Center

    Barth, Roger; Moran, Michael J.

    2014-01-01

    An improved procedure for laboratory determination of the heat capacities of metals is described. The temperature of cold water is continuously recorded with a computer-interfaced temperature probe and the room temperature metal is added. The method is more accurate and faster than previous methods. It allows students to get accurate measurements…

  6. Chiral monolithic absorbent constructed by optically active helical-substituted polyacetylene and graphene oxide: preparation and chiral absorption capacity.

    PubMed

    Li, Weifei; Wang, Bo; Yang, Wantai; Deng, Jianping

    2015-02-01

    Chiral monolithic absorbent is successfully constructed for the first time by using optically active helical-substituted polyacetylene and graphene oxide (GO). The preparative strategy is facile and straightforward, in which chiral-substituted acetylene monomer (Ma), cross-linker (Mb), and alkynylated GO (Mc) undergo copolymerization to form the desired monolithic absorbent in quantitative yield. The resulting monoliths are characterized by circular dichroism, UV-vis absorption, scanning electron microscopy (SEM), FT-IR, Raman, energy-dispersive spectrometer (EDS), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), XPS, and thermogravimetric analysis (TGA) techniques. The polymer chains derived from Ma form chiral helical structures and thus provide optical activity to the monoliths, while GO sheets contribute to the formation of porous structures. The porous structure enables the monolithic absorbents to demonstrate a large swelling ratio in organic solvents, and more remarkably, the helical polymer chains provide optical activity and further enantio-differentiating absorption ability. The present study establishes an efficient and versatile methodology for preparing novel functional materials, in particular monolithic chiral materials based on substituted polyacetylene and GO.

  7. Deterministic absorbed dose estimation in computed tomography using a discrete ordinates method

    SciTech Connect

    Norris, Edward T.; Liu, Xin; Hsieh, Jiang

    2015-07-15

    Purpose: Organ dose estimation for a patient undergoing computed tomography (CT) scanning is very important. Although Monte Carlo methods are considered gold-standard in patient dose estimation, the computation time required is formidable for routine clinical calculations. Here, the authors instigate a deterministic method for estimating an absorbed dose more efficiently. Methods: Compared with current Monte Carlo methods, a more efficient approach to estimating the absorbed dose is to solve the linear Boltzmann equation numerically. In this study, an axial CT scan was modeled with a software package, Denovo, which solved the linear Boltzmann equation using the discrete ordinates method. The CT scanning configuration included 16 x-ray source positions, beam collimators, flat filters, and bowtie filters. The phantom was the standard 32 cm CT dose index (CTDI) phantom. Four different Denovo simulations were performed with different simulation parameters, including the number of quadrature sets and the order of Legendre polynomial expansions. A Monte Carlo simulation was also performed for benchmarking the Denovo simulations. A quantitative comparison was made of the simulation results obtained by the Denovo and the Monte Carlo methods. Results: The difference in the simulation results of the discrete ordinates method and those of the Monte Carlo methods was found to be small, with a root-mean-square difference of around 2.4%. It was found that the discrete ordinates method, with a higher order of Legendre polynomial expansions, underestimated the absorbed dose near the center of the phantom (i.e., low dose region). Simulations of the quadrature set 8 and the first order of the Legendre polynomial expansions proved to be the most efficient computation method in the authors’ study. The single-thread computation time of the deterministic simulation of the quadrature set 8 and the first order of the Legendre polynomial expansions was 21 min on a personal computer

  8. Method of increasing the sulfation capacity of alkaline earth sorbents

    DOEpatents

    Shearer, J.A.; Turner, C.B.; Johnson, I.

    1980-03-13

    A system and method for increasing the sulfation capacity of alkaline earth carbonates to scrub sulfur dioxide produced during the fluidized bed combustion of coal in which partially sulfated alkaline earth carbonates are hydrated in a fluidized bed to crack the sulfate coating and convert the alkaline earth oxide to the hydroxide. Subsequent dehydration of the sulfate-hydroxide to a sulfate-oxide particle produces particles having larger pore size, increased porosity, decreased grain size and additional sulfation capacity. A continuous process is disclosed.

  9. Method of increasing the sulfation capacity of alkaline earth sorbents

    DOEpatents

    Shearer, John A.; Turner, Clarence B.; Johnson, Irving

    1982-01-01

    A system and method for increasing the sulfation capacity of alkaline earth carbonates to scrub sulfur dioxide produced during the fluidized bed combustion of coal in which partially sulfated alkaline earth carbonates are hydrated in a fluidized bed to crack the sulfate coating and convert the alkaline earth oxide to the hydroxide. Subsequent dehydration of the sulfate-hydroxide to a sulfate-oxide particle produces particles having larger pore size, increased porosity, decreased grain size and additional sulfation capacity. A continuous process is disclosed.

  10. Comparative Studies on Effects of Acid Solutions on Aquatic Plants by Beam Deflection and Absorbance Spectroscopy Methods.

    PubMed

    Wu, Xing-Zheng; Nie, Liangjiao; Inoue, Tomomi

    2015-01-01

    The beam deflection method and absorbance spectroscopy were applied to study effects of acid solutions on aquatic plants, and their results were compared. Aquatic plants Egeria densa and Ceratophyllum demersum L were used as model plants. In absorbance experiments, a piece of the plants was put in a beaker with 20 mL HCl solution, and absorbance of the HCl solution was measured every 30 min. In beam deflection experiments, a probe beam from a He-Ne laser was focused to a vicinity of the plants in a culture dish with HCl solution by an objective lens, and deflection signals of the probe beam were monitored by a position sensor. Absorbance spectra of the HCl solutions with immersing of the plants showed absorbance below 410 nm, suggesting that some compounds leaked from the plants into the HCl solutions. Changes of absorbance and deflection signals with immersion time were examined for different pH levels. The changing trends of the absorbance and deflection signals with time were similar, but the absorbance changes were delayed for about 2 - 3 h. The absorbance method could not detect the effect of the pH 5.0 HCl solutions on the aquatic plants, while the deflection method could.

  11. Method for fabricating reticles for EUV lithography without the use of a patterned absorber

    DOEpatents

    Stearns, Daniel G.; Sweeney, Donald W.; Mirkarimi, Paul B.

    2003-10-21

    Absorber material used in conventional EUVL reticles is eliminated by introducing a direct modulation in the complex-valued reflectance of the multilayer. A spatially localized energy source such as a focused electron or ion beam directly writes a reticle pattern onto the reflective multilayer coating. Interdiffusion is activated within the film by an energy source that causes the multilayer period to contract in the exposed regions. The contraction is accurately determined by the energy dose. A controllable variation in the phase and amplitude of the reflected field in the reticle plane is produced by the spatial modulation of the multilayer period. This method for patterning an EUVL reticle has the advantages of (1) avoiding the process steps associated with depositing and patterning an absorber layer and (2) providing control of the phase and amplitude of the reflected field with high spatial resolution.

  12. Phase Transfer-Catalyzed Fast CO2 Absorption by MgO-Based Absorbents with High Cycling Capacity

    SciTech Connect

    Zhang, Keling; Li, Xiaohong S.; Li, Weizhen; Rohatgi, Aashish; Duan, Yuhua; Singh, Prabhakar; Li, Liyu; King, David L.

    2014-06-01

    CO2 capture from pre-combustion syngas in the temperature range of 250-400°C is highly desirable from an energy efficiency perspective. Thermodynamically, MgO is a promising material for CO2 capture, but the gas-solid reaction to produce MgCO3 is kinetically slow due to high lattice energy. We report here fast CO2 absorption over a solid MgO-molten nitrate/nitrite aggregate through phase transfer catalysis, in which the molten phase serves as both a catalyst and reaction medium. Reaction with CO2 at the gas-solid-liquid triple phase boundary results in formation of MgCO3 with significant reaction rate and a high conversion of MgO. This methodology is also applicable to other alkaline earth oxides, inspiring the design of absorbents which require activation of the bulk material.

  13. A New Method for Measuring Cooling Capacity of Unit Coolers

    NASA Astrophysics Data System (ADS)

    Watanabe, Manabu; Mihori, Tomowo; Hara, Masakazu; Kajitani, Shino; Miyao, Daiki; Sakai, Noboru

    In order to measure cooling capacity of unit coolers, a few methods have been practically used. But all of them have serious defects that worsen measuring accuracy. Authors propose a novel method for measuring cooling capacity, which has distinct superiorities in high accuracy and brief measuring time. The method employs a short duct on which test cooler and electric heater are installed. The duct is thermally insulated and it has a fan to make air flow inside of the duct. The cooling capacity can be measured by reading electric power meter applied to the heater, under the condition that the temperature at the inlet and the outlet of the duct are equal. A test apparatus that realizes the proposed method is developed to make experiments for validating its feasibility. Preliminary tests disclose that there is fatal temperature deviation in a cross section at the outlet of the duct caused by configuration of heater unit, which spoils the measuring accuracy. Then, a specially designed air mixer is applied to the duct, which successfully suppresses the temperature deviation. Through the tests under various conditions, averaged measuring accuracy is obtained as about 2%, which proves the proposed method can be successfully applied.

  14. Generator-absorber-heat exchange heat transfer apparatus and method and use thereof in a heat pump

    DOEpatents

    Phillips, Benjamin A.; Zawacki, Thomas S.; Marsala, Joseph

    1994-11-29

    Numerous embodiments and related methods for generator-absorber heat exchange (GAX) are disclosed, particularly for absorption heat pump systems. Such embodiments and related methods use the working solution of the absorption system for the heat transfer medium.

  15. Two-photon or higher-order absorbing optical materials and methods of use

    NASA Technical Reports Server (NTRS)

    Marder, Seth (Inventor); Perry, Joseph (Inventor)

    2001-01-01

    Compositions capable of simultaneous two-photon absorption and higher order absorptivities are disclosed. Many of these compositions are compounds satisfying the formulae D-.PI.-D, A-.PI.-A, D-A-D and A-D-A, wherein D is an electron donor group, A is an electron acceptor group and .PI. comprises a bridge of .pi.-conjugated bonds connecting the electron donor groups and electron acceptor groups. In A-D-A and D-A-D compounds, the .pi. bridge is substituted with electron donor groups and electron acceptor groups, respectively. Also disclosed are methods that generate an electronically excited state of a compound, including those satisfying one of these formulae. The electronically excited state is achieved in a method that includes irradiating the compound with light. Then, the compound is converted to a multi-photon electronically excited state upon simultaneous absorption of at least two photons of light. The sum of the energies of all of the absorbed photons is greater than or equal to the transition energy from a ground state of the compound to the multi-photon excited state. The energy of each absorbed photon is less than the transition energy between the ground state and the lowest single-photon excited state of the compound is less than the transition energy between the multi-photon excited state and the ground state.

  16. Complex absorbing potentials within EOM-CC family of methods: Theory, implementation, and benchmarks

    SciTech Connect

    Zuev, Dmitry; Jagau, Thomas-C.; Krylov, Anna I.; Bravaya, Ksenia B.; Epifanovsky, Evgeny; Shao, Yihan; Sundstrom, Eric; Head-Gordon, Martin

    2014-07-14

    A production-level implementation of equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) for electron attachment and excitation energies augmented by a complex absorbing potential (CAP) is presented. The new method enables the treatment of metastable states within the EOM-CC formalism in a similar manner as bound states. The numeric performance of the method and the sensitivity of resonance positions and lifetimes to the CAP parameters and the choice of one-electron basis set are investigated. A protocol for studying molecular shape resonances based on the use of standard basis sets and a universal criterion for choosing the CAP parameters are presented. Our results for a variety of π{sup *} shape resonances of small to medium-size molecules demonstrate that CAP-augmented EOM-CCSD is competitive relative to other theoretical approaches for the treatment of resonances and is often able to reproduce experimental results.

  17. Communication: Analytic gradients for the complex absorbing potential equation-of-motion coupled-cluster method

    NASA Astrophysics Data System (ADS)

    Benda, Zsuzsanna; Jagau, Thomas-C.

    2017-01-01

    The general theory of analytic energy gradients is presented for the complex absorbing potential equation-of-motion coupled-cluster (CAP-EOM-CC) method together with an implementation within the singles and doubles approximation. Expressions for the CAP-EOM-CC energy gradient are derived based on a Lagrangian formalism with a special focus on the extra terms arising from the presence of the CAP. Our implementation allows for locating minima on high-dimensional complex-valued potential energy surfaces and thus enables geometry optimizations of resonance states of polyatomic molecules. The applicability of our CAP-EOM-CC gradients is illustrated by computations of the equilibrium structures and adiabatic electron affinities of the temporary anions of formaldehyde, formic acid, and ethylene. The results are compared to those obtained from standard EOM-CC calculations and the advantages of CAP methods are emphasized.

  18. A novel pre-oxidation method for elemental mercury removal utilizing a complex vaporized absorbent.

    PubMed

    Zhao, Yi; Hao, Runlong; Guo, Qing

    2014-09-15

    A novel semi-dry integrative method for elemental mercury (Hg(0)) removal has been proposed in this paper, in which Hg(0) was initially pre-oxidized by a vaporized liquid-phase complex absorbent (LCA) composed of a Fenton reagent, peracetic acid (CH3COOOH) and sodium chloride (NaCl), after which Hg(2+) was absorbed by the resultant Ca(OH)2. The experimental results indicated that CH3COOOH and NaCl were the best additives for Hg(0) oxidation. Among the influencing factors, the pH of the LCA and the adding rate of the LCA significantly affected the Hg(0) removal. The coexisting gases, SO2 and NO, were characterized as either increasing or inhibiting in the removal process, depending on their concentrations. Under optimal reaction conditions, the efficiency for the single removal of Hg(0) was 91%. Under identical conditions, the efficiencies of the simultaneous removal of SO2, NO and Hg(0) were 100%, 79.5% and 80.4%, respectively. Finally, the reaction mechanism for the simultaneous removal of SO2, NO and Hg(0) was proposed based on the characteristics of the removal products as determined by X-ray diffraction (XRD), atomic fluorescence spectrometry (AFS), the analysis of the electrode potentials, and through data from related research references.

  19. Absorbed Dose Calculations Using Mesh-based Human Phantoms And Monte Carlo Methods

    NASA Astrophysics Data System (ADS)

    Kramer, Richard

    2011-08-01

    Health risks attributable to the exposure to ionizing radiation are considered to be a function of the absorbed or equivalent dose to radiosensitive organs and tissues. However, as human tissue cannot express itself in terms of equivalent dose, exposure models have to be used to determine the distribution of equivalent dose throughout the human body. An exposure model, be it physical or computational, consists of a representation of the human body, called phantom, plus a method for transporting ionizing radiation through the phantom and measuring or calculating the equivalent dose to organ and tissues of interest. The FASH2 (Female Adult meSH) and the MASH2 (Male Adult meSH) computational phantoms have been developed at the University of Pernambuco in Recife/Brazil based on polygon mesh surfaces using open source software tools and anatomical atlases. Representing standing adults, FASH2 and MASH2 have organ and tissue masses, body height and body mass adjusted to the anatomical data published by the International Commission on Radiological Protection for the reference male and female adult. For the purposes of absorbed dose calculations the phantoms have been coupled to the EGSnrc Monte Carlo code, which can transport photons, electrons and positrons through arbitrary media. This paper reviews the development of the FASH2 and the MASH2 phantoms and presents dosimetric applications for X-ray diagnosis and for prostate brachytherapy.

  20. Method and apparatus for determining the content and distribution of a thermal neutron absorbing material in an object

    DOEpatents

    Crane, Thomas W.

    1986-01-01

    The disclosure is directed to an apparatus and method for determining the content and distribution of a thermal neutron absorbing material within an object. Neutrons having an energy higher than thermal neutrons are generated and thermalized. The thermal neutrons are detected and counted. The object is placed between the neutron generator and the neutron detector. The reduction in the neutron flux corresponds to the amount of thermal neutron absorbing material in the object. The object is advanced past the neutron generator and neutron detector to obtain neutron flux data for each segment of the object. The object may comprise a space reactor heat pipe and the thermal neutron absorbing material may comprise lithium.

  1. Method and apparatus for determining the content and distribution of a thermal neutron absorbing material in an object

    DOEpatents

    Crane, T.W.

    1983-12-21

    The disclosure is directed to an apparatus and method for determining the content and distribution of a thermal neutron absorbing material within an object. Neutrons having an energy higher than thermal neutrons are generated and thermalized. The thermal neutrons are detected and counted. The object is placed between the neutron generator and the neutron detector. The reduction in the neutron flux corresponds to the amount of thermal neutron absorbing material in the object. The object is advanced past the neutron generator and neutron detector to obtain neutron flux data for each segment of the object. The object may comprise a space reactor heat pipe and the thermal neutron absorbing material may comprise lithium.

  2. High capacity adsorption media and method of producing

    DOEpatents

    Tranter, Troy J.; Herbst, R. Scott; Mann, Nicholas R.; Todd, Terry A.

    2008-05-06

    A method of producing an adsorption medium to remove at least one constituent from a feed stream. The method comprises dissolving at least one metal compound in a solvent to form a metal solution, dissolving polyacrylonitrile into the metal solution to form a PAN-metal solution, and depositing the PAN-metal solution into a quenching bath to produce the adsorption medium. The at least one constituent, such as arsenic, selenium, or antimony, is removed from the feed stream by passing the feed stream through the adsorption medium. An adsorption medium having an increased metal loading and increased capacity for arresting the at least one constituent to be removed is also disclosed. The adsorption medium includes a polyacrylonitrile matrix and at least one metal hydroxide incorporated into the polyacrylonitrile matrix.

  3. High capacity adsorption media and method of producing

    DOEpatents

    Tranter, Troy J.; Mann, Nicholas R.; Todd, Terry A.; Herbst, Ronald S.

    2010-10-05

    A method of producing an adsorption medium to remove at least one constituent from a feed stream. The method comprises dissolving and/or suspending at least one metal compound in a solvent to form a metal solution, dissolving polyacrylonitrile into the metal solution to form a PAN-metal solution, and depositing the PAN-metal solution into a quenching bath to produce the adsorption medium. The at least one constituent, such as arsenic, selenium, or antimony, is removed from the feed stream by passing the feed stream through the adsorption medium. An adsorption medium having an increased metal loading and increased capacity for arresting the at least one constituent to be removed is also disclosed. The adsorption medium includes a polyacrylonitrile matrix and at least one metal hydroxide incorporated into the polyacrylonitrile matrix.

  4. Investigation of Electromagnetic Wave Absorber Based on Carbon Fiber Reinforced Aerated Concrete, Using Time-Domain Method

    NASA Astrophysics Data System (ADS)

    Laukaitis, A.; Sinica, M.; Balevičius, S.; Levitas, B.

    2008-03-01

    The electromagnetic wave absorbers prepared from autoclaved aerated concrete containing carbon fibers as additions in the shape of slabs with pyramids cut on one plane of these slabs were tested using dc microwave source and the time-domain method. It was demonstrated that autoclaved aerated concrete allows one to fabricate electromagnetic wave absorbers which have a reflection coefficient up to -30 dB in the frequency range from 2 GHz to 18 GHz.

  5. An environmentally friendly method for the fabrication of reduced graphene oxide foam with a super oil absorption capacity.

    PubMed

    He, Yongqiang; Liu, Yue; Wu, Tao; Ma, Junkui; Wang, Xingrui; Gong, Qiaojuan; Kong, Weina; Xing, Fubao; Liu, Yu; Gao, Jianping

    2013-09-15

    Three kinds of graphene oxide (GO) foams were fabricated using different freezing methods (unidirectional freezing drying (UDF), non-directional freezing drying, and air freezing drying), and the corresponding reduced graphene oxide (RGO) foams were prepared by their thermal reduction of those GO foams. These RGO foams were characterized by Fourier transform infrared spectroscopy, thermal gravimetric analysis, X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy. The absorption process and the factors that influence the absorption capacity were investigated. The RGO foams are hydrophobic and showed extremely high absorbing abilities for organic liquids. The absorption capacity of the RGO foams made by UDF was higher than 100 g g(-1) for all the oils tested (gasoline, diesel oil, pump oil, lubricating oil and olive oil) and had the highest value of about 122 g g(-1) for olive oil. The oil absorption capacity of the GO foams was lower than that of the RGO foams, but for olive oil, the absorption capacity was still high than 70 g g(-1), which is higher than that of most oil absorbents.

  6. Development of a general time-dependent absorbing potential for the constrained adiabatic trajectory method.

    PubMed

    Leclerc, Arnaud; Jolicard, Georges; Killingbeck, John P

    2011-05-21

    The constrained adiabatic trajectory method (CATM) allows us to compute solutions of the time-dependent Schrödinger equation using the Floquet formalism and Fourier decomposition, using matrix manipulation within a non-orthogonal basis set, provided that suitable constraints can be applied to the initial conditions for the Floquet eigenstate. A general form is derived for the inherent absorbing potential, which can reproduce any dispersed boundary conditions. This new artificial potential acting over an additional time interval transforms any wavefunction into a desired state, with an error involving exponentially decreasing factors. Thus, a CATM propagation can be separated into several steps to limit the size of the required Fourier basis. This approach is illustrated by some calculations for the H(2)(+) molecular ion illuminated by a laser pulse.

  7. Waters of Hydration of Cupric Hydrates: A Comparison between Heating and Absorbance Methods

    ERIC Educational Resources Information Center

    Barlag, Rebecca; Nyasulu, Frazier

    2011-01-01

    The empirical formulas of four cupric hydrates are determined by measuring the absorbance in aqueous solution. The Beer-Lambert Law is verified by constructing a calibration curve of absorbance versus known Cu[superscript 2+](aq) concentration. A solution of the unknown hydrate is prepared by using 0.2-0.3 g of hydrate, and water is added such…

  8. Chemical composition, aroma evaluation, and oxygen radical absorbance capacity of volatile oil extracted from Brassica rapa cv. "yukina" used in Japanese traditional food.

    PubMed

    Usami, Atsushi; Motooka, Ryota; Takagi, Ayumi; Nakahashi, Hiroshi; Okuno, Yoshiharu; Miyazawa, Mitsuo

    2014-01-01

    The chemical composition of the volatile oil extracted from the aerial parts of Brassica rapa cv. "yukina" was analyzed using GC-MS, GC-PFPD, and GC-O. A total of 50 compounds were identified. The most prominent constituents were (E)-1,5-heptadiene (40.27%), 3-methyl-3-butenenitrile (25.97%) and 3-phenylpropanenitrile (12.41%). With regard to aroma compounds, 12 compounds were identified by GC-O analysis. The main aroma-active compounds were dimethyl tetrasulfide (sulphury-cabbage, FD = 64), 3-phenylpropanenitrile (nutty, FD = 64), 3-methylindole (pungent, FD = 64), and methional (potato, FD = 32). The antioxidant activity of the aroma-active compounds of the oil was determined using an oxygen radical absorbance capacity (ORAC) assay using fluorescein as the fluorescent probe. The ORAC values were found to be 785 ± 67 trolox equivalents (μmol TE/g) for B. rapa cv. "yukina" oil. The results obtained showed that the volatile oil extracted from the aerial parts is a good dietary source of antioxidants.

  9. A comparison between the technical absorbent and ventilated capsule methods for measuring local sweat rate.

    PubMed

    Morris, Nathan B; Cramer, Matthew N; Hodder, Simon G; Havenith, George; Jay, Ollie

    2013-03-15

    This study assessed the accuracy of the technical absorbent (TA) method for measuring local sweat rate (LSR) relative to the well-established ventilated capsule (VC) method during steady-state and nonsteady-state sweating using large and small sample surface areas on the forearm and midback. Forty participants (38 males and two females) cycled at 60% peak oxygen consumption for 75 min in either a temperate [22.3 ± 0.9°C, 32 ± 17% relative humidity (RH)] or warm (32.5 ± 0.8°C, 29 ± 7% RH) environment. Simultaneous bilateral comparisons of 5-min LSR measurements using the TA and VC methods were performed for the back and forearm after 10, 30, 50, and 70 min. LSR values, measured using the TA method, were highly correlated with the VC method at all time points, irrespective of sample surface area and body region (all P < 0.001). On average, ≈ 79% of the variability observed in LSR measured with the VC method was described by the TA method. The mean difference in absolute LSR using the TA method (TA-VC with 95% confidence intervals) was -0.23 [-0.30,-0.16], -0.11 [-0.21,0.00], -0.03 [-0.14,+0.08], and +0.02 [-0.07,+0.11] mg · cm(-2) · min(-1) after 10, 30, 50, and 70 min of exercise, respectively. Duplicate LSR measurements within each method during steady-state sweating were highly correlated (TA: r = 0.96, P < 0.001, n = 20; VC: r = 0.97, P < 0.001, n = 20) with a mean bias of +0.07 ± 0.14 and +0.01 ± 0.10 mg · cm(-2) · min(-1) for TA and VC methods, respectively. The mean smallest detectable difference in LSR was 0.12 and 0.05 mg · min(-1) · cm(-2) for TA and VC methods, respectively. These data support the TA method as a reliable alternative for measuring the rate of sweat appearance on the skin surface.

  10. Generator-absorber-heat exchange heat transfer apparatus and method and use thereof in a heat pump

    DOEpatents

    Phillips, Benjamin A.; Zawacki, Thomas S.

    1996-12-03

    Numerous embodiments and related methods for generator-absorber heat exchange (GAX) are disclosed, particularly for absorption heat pump systems. Such embodiments and related methods use the working solution of the absorption system for the heat transfer medium. A combination of weak and rich liquor working solution is used as the heat transfer medium.

  11. Generator-absorber-heat exchange heat transfer apparatus and method and use thereof in a heat pump

    DOEpatents

    Phillips, Benjamin A.; Zawacki, Thomas S.

    1998-07-21

    Numerous embodiments and related methods for generator-absorber heat exchange (GAX) are disclosed, particularly for absorption heat pump systems. Such embodiments and related methods use, as the heat transfer medium, the working fluid of the absorption system taken from the generator at a location where the working fluid has a rich liquor concentration.

  12. Generator-absorber-heat exchange heat transfer apparatus and method and use thereof in a heat pump

    DOEpatents

    Phillips, B.A.; Zawacki, T.S.

    1998-07-21

    Numerous embodiments and related methods for generator-absorber heat exchange (GAX) are disclosed, particularly for absorption heat pump systems. Such embodiments and related methods use, as the heat transfer medium, the working fluid of the absorption system taken from the generator at a location where the working fluid has a rich liquor concentration. 5 figs.

  13. Robust one pot synthesis of colloidal silver nanoparticles by simple redox method and absorbance recovered sensing.

    PubMed

    Salman, Muhammad; Iqbal, Mahwish; El Ashry, El Sayed H; Kanwal, Shamsa

    2012-01-01

    Conventional synthesis of silver nanoparticles employs a reducing agent and a capping agent. In this report water-soluble silver nanoparticles (AgNPs) were prepared facilely by chemical reduction of Ag(I) ions. 4-Amino-3-(d-gluco-pentitol-1-yl)-4,5-dihydro-1,2,4-triazole-5-thione (AGTT) was used both as reducing and stabilizing agent. Direct heating methodology was found to be more suitable for achieving particles with a hydrodynamic diameter of ~20 nm. AGTT exists as tautomer in solution form and our studies indicate that -NH(2) group is involved in the reduction and stabilization of Ag(+) and thione (Δ=S) group of AGTT is possibly involved in stabilizing the nanoparticles via coordinate covalent linkage. Characterization of synthesized silver nanoparticles was performed by UV-vis, FT-IR and by FESEM. Based on the absorption properties of synthesized AgNPs, we used AgNPs to detect bovine serum albumin (BSA) and AgNPs-BSA composite nanoprobe was further applied to detect Cu(2+) based on absorbance recovery. The proposed method has advantages over existing methods in terms of rapid synthesis and stability of AgNPs and their applications. Analysis is reproducible, cost effective and highly sensitive. The lowest detectable concentration of BSA in this approach is 3 nM, and for Cu(2+) it can detect upto 200 pM.

  14. Effective non-retarded method as a tool for the design of tunable nanoparticle composite absorbers

    NASA Astrophysics Data System (ADS)

    Ortiz, Guillermo; Inchaussandague, Marina; Skigin, Diana; Depine, Ricardo; Mochán, W. Luis

    2014-10-01

    We investigate the capabilities of an effective non-retarded formalism (ENR) for the exploration and design of nanoparticle composites with specific optical properties. We consider a composite material comprising periodically distributed metallic spheres in a dielectric host matrix. The effective macroscopic dielectric function of the composite medium is obtained by means of the ENR and is used to calculate the electromagnetic response of a slab made of an inhomogeneous material. This response is compared with that obtained by using the layer Korringa-Kohn-Rostoker wave calculation method (LKKR). We analyze the optical properties for different filling fractions, especially in the vicinity of the resonance frequencies of the macroscopic dielectric function. We notice that for dense systems within the long wavelength regime, the results of some analytical theories developed by other authors do not properly describe the multipolar excitations and interactions of orders higher than the dipole, in contrast with the results obtained by using an ENR. Therefore, those methods are not suitable for the design of compound films with novel properties. We show that by appropriately choosing the parameters of the composite, it is possible to achieve a tunable absorber film, and more generally, we show that ENR is a versatile tool for the design of nanoparticle composite materials with specific properties.

  15. Innovative teaching methods for capacity building in knowledge translation

    PubMed Central

    2011-01-01

    Background In some current healthcare settings, there is a noticeable absence of national institutions committed to the synthesis and use of evidence in healthcare decision- and policy-making. This absence creates a need to broaden the responsibilities of healthcare providers to include knowledge brokering and advocacy in order to optimize knowledge translation to other stakeholders, especially policy-makers. However, this process requires practitioners and researchers to acquire certain types of knowledge and skills. This article introduces two innovative methods for capacity building in knowledge translation (KT). Methods During a workshop aimed at preparing 21 trainers in evidence-based medicine, two innovative methods were used: (1) debate and (2) a knowledge translation project (KTP). The main objective of the debates approach was to strengthen participants' critical thinking abilities by requiring them to search for and appraise evidence and defend their arguments. The KTP was used to introduce participants to the essential steps of knowledge translation and to suggest an extended role for healthcare practitioners, i.e., using evidence to manage not only individual patients but also to a community of patients. Participants' performances were assessed according to a pre-designed scheme. At the end of the workshop, participants' opinions and experiences with the innovative teaching methods were evaluated based on their answers to a questionnaire and the results of small-group discussions. Results The participants performed well in both the debate and KTP methods. During post-workshop group discussions, they indicated that the debate approach had added a new dimension to their evidence-based medicine skills by adding purpose and motivation. However, they felt that their performances would have been better if they had been offered practical demonstrations of how to conduct the debate. The participants indicated that the KTP enhanced their understanding of the

  16. Comparison of Primary Models to Predict Microbial Growth by the Plate Count and Absorbance Methods.

    PubMed

    Pla, María-Leonor; Oltra, Sandra; Esteban, María-Dolores; Andreu, Santiago; Palop, Alfredo

    2015-01-01

    The selection of a primary model to describe microbial growth in predictive food microbiology often appears to be subjective. The objective of this research was to check the performance of different mathematical models in predicting growth parameters, both by absorbance and plate count methods. For this purpose, growth curves of three different microorganisms (Bacillus cereus, Listeria monocytogenes, and Escherichia coli) grown under the same conditions, but with different initial concentrations each, were analysed. When measuring the microbial growth of each microorganism by optical density, almost all models provided quite high goodness of fit (r(2) > 0.93) for all growth curves. The growth rate remained approximately constant for all growth curves of each microorganism, when considering one growth model, but differences were found among models. Three-phase linear model provided the lowest variation for growth rate values for all three microorganisms. Baranyi model gave a variation marginally higher, despite a much better overall fitting. When measuring the microbial growth by plate count, similar results were obtained. These results provide insight into predictive microbiology and will help food microbiologists and researchers to choose the proper primary growth predictive model.

  17. Comparison of Primary Models to Predict Microbial Growth by the Plate Count and Absorbance Methods

    PubMed Central

    Pla, María-Leonor; Oltra, Sandra; Esteban, María-Dolores; Andreu, Santiago; Palop, Alfredo

    2015-01-01

    The selection of a primary model to describe microbial growth in predictive food microbiology often appears to be subjective. The objective of this research was to check the performance of different mathematical models in predicting growth parameters, both by absorbance and plate count methods. For this purpose, growth curves of three different microorganisms (Bacillus cereus, Listeria monocytogenes, and Escherichia coli) grown under the same conditions, but with different initial concentrations each, were analysed. When measuring the microbial growth of each microorganism by optical density, almost all models provided quite high goodness of fit (r2 > 0.93) for all growth curves. The growth rate remained approximately constant for all growth curves of each microorganism, when considering one growth model, but differences were found among models. Three-phase linear model provided the lowest variation for growth rate values for all three microorganisms. Baranyi model gave a variation marginally higher, despite a much better overall fitting. When measuring the microbial growth by plate count, similar results were obtained. These results provide insight into predictive microbiology and will help food microbiologists and researchers to choose the proper primary growth predictive model. PMID:26539483

  18. Simultaneous determination of some ultraviolet-absorbing chemicals in sunscreen cosmetics using a high-performance liquid chromatography method.

    PubMed

    Liu, T; Wu, D

    2011-10-01

    A method of gradient elution high-performance liquid chromatography (HPLC) for simultaneous determination of 11 different ultraviolet-absorbing chemicals of phenylbenzlmldazole sulphonic acid, 4-aminobenzoic acid, benzophenone-4, benzophenone-3, isoamyl p-methoxycinnamate, 4-methylbenzylidene camphor, octocrylene, ethylhexyl methoxycinnamate, homosalate, ethylhexyl salicylate, methylene bis-benzotriazolyl tetramethylbutyl phenol was developed for the application to sunscreen cosmetic products. In this study, an Agilent SB-C18 analytical column (250 × 4.6 mm, 5 μm) was utilized and methanol, tetrahydrofuran and perchloric acid aqueous solution (0.2 mL HClO(4) + 300 mL H(2)O) were used for gradient elution at a total flow rate of 1.0 mL min(-1). The optimum conditions for 11 different ultraviolet-absorbing chemicals analyses were investigated. All calibration curves showed good linear regression with UV detection (311 nm) within test ranges. The correlation coefficients were better than 0.999 in all cases. The assay was simple, selective, convenient and reproducible and is suitable for the determination of ultraviolet-absorbing chemicals in commercial sunscreen cosmetic products. The use frequency of 11 different ultraviolet absorbents in 100 sunscreen cosmetics was investigated and statistically analysed. The ultraviolet absorbent of maximum use frequency was ethylhexyl methoxycinnamate.

  19. Method of treating emissions of a hybrid vehicle with a hydrocarbon absorber and a catalyst bypass system

    SciTech Connect

    Roos, Bryan Nathaniel; Gonze, Eugene V; Santoso, Halim G; Spohn, Brian L

    2014-01-14

    A method of treating emissions from an internal combustion engine of a hybrid vehicle includes directing a flow of air created by the internal combustion engine when the internal combustion engine is spinning but not being fueled through a hydrocarbon absorber to collect hydrocarbons within the flow of air. When the hydrocarbon absorber is full and unable to collect additional hydrocarbons, the flow of air is directed through an electrically heated catalyst to treat the flow of air and remove the hydrocarbons. When the hydrocarbon absorber is not full and able to collect additional hydrocarbons, the flow of air is directed through a bypass path that bypasses the electrically heated catalyst to conserve the thermal energy stored within the electrically heated catalyst.

  20. Application of advanced methods for durability assessment of new absorber coatings

    NASA Astrophysics Data System (ADS)

    Frei, Ulrich; Brunold, Stefan; Koehl, Michael; Brucker, Franz; Carlsson, Bo; Moeller, K.

    1995-08-01

    Accelerated life testing of solar energy materials has been one of the main topics within the former Task X 'Solar Materials Research and Development' of the International Energy Agency (IEA) Solar Heating and Cooling Programme. In the case study of some selective solar absorber coating materials for domestic hot water systems procedures are presented for service time assessment, applicable for example to absorber coating materials. As a continuation of the finalized Task X a working group, 'Materials in Solar Thermal Systems' also in the framework of the International Energy Agency (IEA) 'Solar Heating and Cooling Programme' was initiated. One of the first projects is described here. Its aim is to investigate the conformity of the durability assessment, applied on solar absorber coatings tested by different laboratories. Each lab is working independently, this means there is no information exchange between the labs until the results are on paper. Test samples are delivered by the participants. Four different absorber coatings are identified to be useful for the project. The coating materials as well as the production procedures of the coatings are not relevant for the study, therefore no information is given. The experimental procedures as well as the judgement over the different absorber coatings are described in detail. Some comparisons between individual results of the different labs indicates possible weaknesses and further necessary refinements. Finally, expected costs for the whole procedure are presented.

  1. Spectral absorbance of benthic cladoceran carapaces as a new method for inferring past UV exposure of aquatic biota

    NASA Astrophysics Data System (ADS)

    Nevalainen, Liisa; Rautio, Milla

    2014-01-01

    We developed a method for measuring fossil cladoceran (Branchiopoda) carapace absorbance to infer past ultraviolet radiation (UV) exposure in lakes. This was done under the presumptions that cladocerans synthesize photoprotective compounds, of which melanin is the main UV-absorbing pigment, to their exoskeletons and melanin is preserved in sedimentary cladoceran remains. We extracted large-sized cladoceran (benthic Alona spp.) carapaces from subsections of sediment cores from two environmentally divergent lakes; a humic boreal forest lake in eastern Finland (past 1500 years) and a clear-water mountain lake in the Austrian Alps (past 300 years). We measured the absorbance of extracted carapaces with a spectrophotometer under visible light and UV wavelengths using an adapter, which was designed to hold the microfossils. When compared to the spectrum of synthetic melanin, the shapes of absorbance spectra at the 700-280 nm range suggested that the fossil carapaces contained melanin. The carapace absorbance under UV throughout the sediment cores was significantly higher in the clear-water alpine lake than in the humic boreal lake reflecting differences in the general underwater UV and optical environments between the sites. In addition, carapace absorbance was significantly higher during the Little Ice Age (LIA) than during pre- or post-LIA periods in both lakes. In the alpine lake, this was most likely a response to increased underwater UV induced by reduced primary production and more transparent water column during the cold summers of LIA, whereas reduced input of carbon compounds from the catchment through elongated permafrost and ice-cover periods likely induced higher water transparency in the boreal lake during this cold climate phase. We conclude that fossil melanin provides a good estimation of past underwater UV exposure in lakes with large cladoceran carapaces preserved in sediments and that the method introduced here is easy and cost- and time

  2. Comparison of Three Methods for Wind Turbine Capacity Factor Estimation

    PubMed Central

    Ditkovich, Y.; Kuperman, A.

    2014-01-01

    Three approaches to calculating capacity factor of fixed speed wind turbines are reviewed and compared using a case study. The first “quasiexact” approach utilizes discrete wind raw data (in the histogram form) and manufacturer-provided turbine power curve (also in discrete form) to numerically calculate the capacity factor. On the other hand, the second “analytic” approach employs a continuous probability distribution function, fitted to the wind data as well as continuous turbine power curve, resulting from double polynomial fitting of manufacturer-provided power curve data. The latter approach, while being an approximation, can be solved analytically thus providing a valuable insight into aspects, affecting the capacity factor. Moreover, several other merits of wind turbine performance may be derived based on the analytical approach. The third “approximate” approach, valid in case of Rayleigh winds only, employs a nonlinear approximation of the capacity factor versus average wind speed curve, only requiring rated power and rotor diameter of the turbine. It is shown that the results obtained by employing the three approaches are very close, enforcing the validity of the analytically derived approximations, which may be used for wind turbine performance evaluation. PMID:24587755

  3. Comparison of three methods for wind turbine capacity factor estimation.

    PubMed

    Ditkovich, Y; Kuperman, A

    2014-01-01

    Three approaches to calculating capacity factor of fixed speed wind turbines are reviewed and compared using a case study. The first "quasiexact" approach utilizes discrete wind raw data (in the histogram form) and manufacturer-provided turbine power curve (also in discrete form) to numerically calculate the capacity factor. On the other hand, the second "analytic" approach employs a continuous probability distribution function, fitted to the wind data as well as continuous turbine power curve, resulting from double polynomial fitting of manufacturer-provided power curve data. The latter approach, while being an approximation, can be solved analytically thus providing a valuable insight into aspects, affecting the capacity factor. Moreover, several other merits of wind turbine performance may be derived based on the analytical approach. The third "approximate" approach, valid in case of Rayleigh winds only, employs a nonlinear approximation of the capacity factor versus average wind speed curve, only requiring rated power and rotor diameter of the turbine. It is shown that the results obtained by employing the three approaches are very close, enforcing the validity of the analytically derived approximations, which may be used for wind turbine performance evaluation.

  4. A clinical evaluation of the ability of the Dentobuff method to estimate buffer capacity of saliva.

    PubMed

    Wikner, S; Nedlich, U

    1985-01-01

    The power of a colourimetric method to estimate buffer capacity of saliva (Dentobuff) was compared with an electrometric method in 220 adults. The methods correlated well but Dentobuff frequently underestimated high buffer values which was considered to be of minor practical importance. Dentobuff identified groups with low, intermediate and high buffer capacity as good as the electrometric method.

  5. A robust method for determining the absorbed dose to water in a phantom for low-energy photon radiation

    NASA Astrophysics Data System (ADS)

    Schneider, T.

    2011-06-01

    The application of more and more low-energy photon radiation in brachytherapy—either in the form of low-dose-rate radioactive seeds such as Pd-103 or I-125 or in the form of miniature x-ray tubes—has induced greater interest in determining the absorbed dose to water in water in this energy range. As it seems to be hardly feasible to measure the absorbed dose with calorimetric methods in this low energy range, ionometric methods are the preferred choice. However, the determination of the absorbed dose to water in water by ionometric methods is difficult in this energy range. With decreasing energy, the relative uncertainty of the photon cross sections increases and as the mass energy transfer coefficients show a steep gradient, the spectra of the radiation field must be known precisely. In this work two ionometric methods to determine the absorbed dose to water are evaluated with respect to their sensitivity to the uncertainties of the spectra and of the atomic database. The first is the measurement of the air kerma free in air and the application of an MC-based conversion factor to the absorbed dose to water. The second is the determination of the absorbed dose to water by means of an extrapolation chamber as an integral part of a phantom. In the complementing MC-calculations, two assortments of spectra each of which is based on a separate unfolding procedure were used as well as two kinds of databases: the standard PEGS and the recently implemented NIST database of EGSnrc. Experimental results were obtained by using a parallel-plate graphite extrapolation chamber and a free-air chamber. In the case when the water kerma in a phantom is determined from the measurements of air kerma free in air, differences in the order of 10% were found, according to which the database or the kind of spectrum is used. In contrast to this, for the second method, the differences found were about 0.5%.

  6. [Decision-making while implantation of biodegradable vascular scaffolds ABSORB based on methods of intravascular visualization].

    PubMed

    Buzaev, I V; Plechev, V V; Nikolaeva, I E; Zagitov, I G; Oleĭnik, B A

    A series of studies demonstrated comparability of the incidence rate of major adverse cardiac events (MACE) in the middle-term postoperative period following implantation of last-generation drug-coated stents and biodegradable intravascular scaffolds. It was noted observed that these complications may be associated with malposition and inadequate inappropriate preparation of the lesion. We carried out a total of 16 percutaneous coronary interventions (PCI) with implantation of absorbable vascular scaffolds (Absorb, Abbott Vascular) under the guidance of optical coherent tomography. Besides, a further 16 PCIs were performed without intravascular visualization (control group). As experience was gathered, the algorithm of carrying out optical coherent tomography was subjected to changes, resulting in proposal of an optimal algorithm for choice of intraoperative policy based on the findings obtained in optical coherent tomography.

  7. Thermally-Resilient, Broadband Optical Absorber from UV-to-IR Derived from Carbon Nanostructures and Method of Making the Same

    NASA Technical Reports Server (NTRS)

    Kaul, Anupama B. (Inventor); Coles, James B. (Inventor)

    2015-01-01

    A monolithic optical absorber and methods of making same. The monolithic optical absorber uses an array of mutually aligned carbon nanotubes that are grown using a PECVD growth process and a structure that includes a conductive substrate, a refractory template layer and a nucleation layer. Monolithic optical absorbers made according to the described structure and method exhibit high absorptivity, high site densities (greater than 10.sup.9 nanotubes/cm.sup.2), very low reflectivity (below 1%), and high thermal stability in air (up to at least 400.degree. C.). The PECVD process allows the application of such absorbers in a wide variety of end uses.

  8. The Methods Behind 2015 Informatics Capacity and Needs Assessment Study

    PubMed Central

    2016-01-01

    The 2015 Informatics Needs and Capacity of Local Health Departments (LHDs) survey is the most recent comprehensive source of quantitative data on LHD informatics. Conducted by the National Association of County & City Health Officials (NACCHO), this is the third nationally representative quantitative study of LHD informatics since 2009. The previous 2 comprehensive quantitative assessments were conducted by NACCHO in 2009-2010 and 2011. Given that public health informatics is rapidly evolving, the 2015 Informatics survey is a much-needed country-wide assessment of the current informatics needs and capacities of LHDs. This article outlines detailed methodology used in the 2015 Informatics survey, including instrument development, pretesting, sampling design and sample size, survey administration, and sampling weights. A 9-member advisory committee representing federal, state, and local health agency representatives guided the design and implementation of this study. The survey instrument was organized into 6 topic areas: demographics, physical infrastructure, skills and capacity available, public health workforce development needs, electronic health records, and health information exchange. The instrument was pretested with a sample of 20 LHDs and subsequently pilot-tested with 30 LHDs. The survey was administered via the Qualtrics survey software to the sample of 650 LHDs, selected using stratified random sampling. The survey was fielded for approximately 8 weeks and 324 usable responses were received, constituting a response rate of 50%. Statistical weights were developed to account for 3 factors: (a) disproportionate response rate by population size (using 7 population strata), (b) oversampling of LHDs with larger population sizes, and (c) sampling rather than a census approach. PMID:27684627

  9. Adaptive step-size algorithm for Fourier beam-propagation method with absorbing boundary layer of auto-determined width

    SciTech Connect

    Learn, R.; Feigenbaum, E.

    2016-05-27

    Two algorithms that enhance the utility of the absorbing boundary layer are presented, mainly in the framework of the Fourier beam-propagation method. One is an automated boundary layer width selector that chooses a near-optimal boundary size based on the initial beam shape. Furthermore, the second algorithm adjusts the propagation step sizes based on the beam shape at the beginning of each step in order to reduce aliasing artifacts.

  10. 21 CFR 130.12 - General methods for water capacity and fill of containers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 2 2012-04-01 2012-04-01 false General methods for water capacity and fill of containers. 130.12 Section 130.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FOOD STANDARDS: GENERAL General Provisions § 130.12 General methods for water capacity and...

  11. Method for Fast CT/SPECT-Based 3D Monte Carlo Absorbed Dose Computations in Internal Emitter Therapy

    PubMed Central

    Wilderman, S. J.; Dewaraja, Y. K.

    2010-01-01

    The DPM (Dose Planning Method) Monte Carlo electron and photon transport program, designed for fast computation of radiation absorbed dose in external beam radiotherapy, has been adapted to the calculation of absorbed dose in patient-specific internal emitter therapy. Because both its photon and electron transport mechanics algorithms have been optimized for fast computation in 3D voxelized geometries (in particular, those derived from CT scans), DPM is perfectly suited for performing patient-specific absorbed dose calculations in internal emitter therapy. In the updated version of DPM developed for the current work, the necessary inputs are a patient CT image, a registered SPECT image, and any number of registered masks defining regions of interest. DPM has been benchmarked for internal emitter therapy applications by comparing computed absorption fractions for a variety of organs using a Zubal phantom with reference results from the Medical Internal Radionuclide Dose (MIRD) Committee standards. In addition, the β decay source algorithm and the photon tracking algorithm of DPM have been further benchmarked by comparison to experimental data. This paper presents a description of the program, the results of the benchmark studies, and some sample computations using patient data from radioimmunotherapy studies using 131I. PMID:20305792

  12. An estimate by two methods of thyroid absorbed doses due to BRAVO fallout in several northern Marshall Islands

    SciTech Connect

    Musolino, S.V.; Hull, A.P.; Greenhouse, N.A.

    1997-10-01

    Estimates of the thyroid absorbed doses due to fallout originating from the 1 March 1954 BRAVO thermonuclear test on Bikini Atoll have been made for several inhabited locations in the Northern Marshall Islands. Rongelap, Utirik, Rongerik and Ailinginae Atolls were also inhabited on 1 March 1954, where retrospective thyroid absorbed doses have previously been reconstructed. Current estimates are based primarily on external exposure data, which were recorded shortly after each nuclear test in the Castle Series, and secondarily on soil concentrations of {sup 137}Cs in samples collected in 1978 and 1988, along with aerial monitoring done in 1978. External exposures and {sup 137}Cs Soil concentrations were representative of the atmospheric transport and deposition patterns of the entire Castle Series tests and show that the BRAVO test was the major contributor to fallout exposure during the Castle series and other test series which were carried out in the Marshall Islands. These data have been used as surrogates for fission product radioiodines and telluriums in order to estimate the range of thyroid absorbed doses that may have occurred throughout the Marshall Islands. Dosimetry based on these two sets of estimates agreed within a factor of 4 at the locations where BRAVO was the dominant contributor to the total exposure and deposition. Both methods indicate that thyroid absorbed doses in the range of 1 Gy (100 rad) may have been incurred in some of the northern locations, whereas the doses at southern locations did not significantly exceed levels comparable to those from worldwide fallout. The results of these estimates indicate that a systematic medical survey for thyroid disease should be conducted, and that a more definitive dose reconstruction should be made for all the populated atolls and islands in the Northern Marshall Islands beyond Rongelap, Utirik, Rongerik and Ailinginae, which were significantly contaminated by BRAVO fallout. 30 refs., 2 figs., 10 tabs.

  13. An estimate by two methods of thyroid absorbed doses due to BRAVO fallout in several Northern Marshall Islands.

    PubMed

    Musolino, S V; Greenhouse, N A; Hull, A P

    1997-10-01

    Estimates of the thyroid absorbed doses due to fallout originating from the 1 March 1954 BRAVO thermonuclear test on Bikini Atoll have been made for several inhabited locations in the Northern Marshall Islands. Rongelap, Utirik, Rongerik and Ailinginae Atolls were also inhabited on 1 March 1954, where retrospective thyroid absorbed doses have previously been reconstructed. The current estimates are based primarily on external exposure data, which were recorded shortly after each nuclear test in the Castle Series, and secondarily on soil concentrations of 137Cs in samples collected in 1978 and 1988, along with aerial monitoring done in 1978. The external exposures and 137Cs soil concentrations were representative of the atmospheric transport and deposition patterns of the entire Castle Series tests and show that the BRAVO test was the major contributor to fallout exposure during the Castle series and other test series which were carried out in the Marshall Islands. These data have been used as surrogates for fission product radioiodines and telluriums in order to estimate the range of thyroid absorbed doses that may have occurred throughout the Marshall Islands. Dosimetry based on these two sets of estimates agreed within a factor of 4 at the locations where BRAVO was the dominant contributor to the total exposure and deposition. Both methods indicate that thyroid absorbed doses in the range of 1 Gy (100 rad) may have been incurred in some of the northern locations, whereas the doses at southern locations did not significantly exceed levels comparable to those from worldwide fallout. The results of these estimates indicate that a systematic medical survey for thyroid disease should be conducted, and that a more definitive dose reconstruction should be made for all the populated atolls and islands in the Northern Marshall Islands beyond Rongelap, Utirik, Rongerik and Ailinginae, which were significantly contaminated by BRAVO fallout.

  14. Method for absorbing hydrogen using an oxidation resisant organic hydrogen getter

    DOEpatents

    Shepodd, Timothy J.; Buffleben, George M.

    2009-02-03

    A composition for removing hydrogen from an atmosphere, comprising a mixture of a polyphenyl ether and a hydrogenation catalyst, preferably a precious metal catalyst, and most preferably platinum, is disclosed. This composition is stable in the presence of oxygen, will not polymerize or degrade upon exposure to temperatures in excess of 200.degree. C., or prolonged exposure to temperatures in the range of 100-300.degree. C. Moreover, these novel hydrogen getter materials can be used to efficiently remove hydrogen from mixtures of hydrogen/inert gas (e.g., He, Ar, N.sub.2), hydrogen/ammonia atmospheres, such as may be encountered in heat exchangers, and hydrogen/carbon dioxide atmospheres. Water vapor and common atmospheric gases have no adverse effect on the ability of these getter materials to absorb hydrogen.

  15. Shock Absorbing Helmets

    NASA Technical Reports Server (NTRS)

    1978-01-01

    This paper presents a description of helmets used by football players that offer three times the shock-absorbing capacity of earlier types. An interior padding for the helmets, composed of Temper Foam, first used by NASA's Ames Research Center in the design of aircraft seats is described.

  16. Specific absorbed fractions of electrons and photons for Rad-HUMAN phantom using Monte Carlo method

    NASA Astrophysics Data System (ADS)

    Wang, Wen; Cheng, Meng-Yun; Long, Peng-Cheng; Hu, Li-Qin

    2015-07-01

    The specific absorbed fractions (SAF) for self- and cross-irradiation are effective tools for the internal dose estimation of inhalation and ingestion intakes of radionuclides. A set of SAFs of photons and electrons were calculated using the Rad-HUMAN phantom, which is a computational voxel phantom of a Chinese adult female that was created using the color photographic image of the Chinese Visible Human (CVH) data set by the FDS Team. The model can represent most Chinese adult female anatomical characteristics and can be taken as an individual phantom to investigate the difference of internal dose with Caucasians. In this study, the emission of mono-energetic photons and electrons of 10 keV to 4 MeV energy were calculated using the Monte Carlo particle transport calculation code MCNP. Results were compared with the values from ICRP reference and ORNL models. The results showed that SAF from the Rad-HUMAN have similar trends but are larger than those from the other two models. The differences were due to the racial and anatomical differences in organ mass and inter-organ distance. The SAFs based on the Rad-HUMAN phantom provide an accurate and reliable data for internal radiation dose calculations for Chinese females. Supported by Strategic Priority Research Program of Chinese Academy of Sciences (XDA03040000), National Natural Science Foundation of China (910266004, 11305205, 11305203) and National Special Program for ITER (2014GB112001)

  17. Soft wheat and flour products methods review: solvent retention capacity equation correction

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This article discusses the results of a significant change to calculations made within AACCI Approved methods 56-10 and 56-11, the Alkaline Water Retention Capacity (AWRC) test and the Solvent Retention Capacity (SRC) test. The AACCI Soft Wheat and Flour Products Technical Committee reviewed propos...

  18. Method And Apparatus For Arbitrarily Large Capacity Removable Media

    DOEpatents

    Milligan, Charles A.; Hughes, James P.; Debiez; Jacques

    2003-04-08

    A method and apparatus to handle multiple sets of removable media within a storage system. A first set of removable media are mounted on a set of drives. Data is accepted until the first set of removable media is filled. A second set of removable media is mounted on the drives, while the first set of removable media is removed. When the change in removable media is complete, writing of data proceeds on the second set of removable media. Data may be buffered while the change in removable media occurs. Alternatively, two sets of removable media may be mounted at the same time. When the first set of removable media is filled to a selected amount, the second set of removable media may then be used to write the data. A third set of removable media is set up or mounted for use, while the first set of removable media is removed.

  19. Advanced neutron absorber materials

    DOEpatents

    Branagan, Daniel J.; Smolik, Galen R.

    2000-01-01

    A neutron absorbing material and method utilizing rare earth elements such as gadolinium, europium and samarium to form metallic glasses and/or noble base nano/microcrystalline materials, the neutron absorbing material having a combination of superior neutron capture cross sections coupled with enhanced resistance to corrosion, oxidation and leaching.

  20. Periodical capacity setting methods for make-to-order multi-machine production systems.

    PubMed

    Altendorfer, Klaus; Hübl, Alexander; Jodlbauer, Herbert

    2014-08-18

    The paper presents different periodical capacity setting methods for make-to-order, multi-machine production systems with stochastic customer required lead times and stochastic processing times to improve service level and tardiness. These methods are developed as decision support when capacity flexibility exists, such as, a certain range of possible working hours a week for example. The methods differ in the amount of information used whereby all are based on the cumulated capacity demand at each machine. In a simulation study the methods' impact on service level and tardiness is compared to a constant provided capacity for a single and a multi-machine setting. It is shown that the tested capacity setting methods can lead to an increase in service level and a decrease in average tardiness in comparison to a constant provided capacity. The methods using information on processing time and customer required lead time distribution perform best. The results found in this paper can help practitioners to make efficient use of their flexible capacity.

  1. Measurement of xanthine oxidase inhibition activity of phenolics and flavonoids with a modified cupric reducing antioxidant capacity (CUPRAC) method.

    PubMed

    Ozyürek, Mustafa; Bektaşoğlu, Burcu; Güçlü, Kubilay; Apak, Reşat

    2009-03-16

    Various dietary polyphenolics have been found to show an inhibitory effect on xanthine oxidase (XO) which mediates oxidative stress-originated diseases because of its ability to generate reactive oxygen species (ROS), including superoxide anion radical (O(2)(-)) and hydrogen peroxide. XO activity has usually been determined by following the rate of uric acid formation from xanthine-xanthine oxidase (X-XO) system using the classical XO activity assay (UV-method) at 295nm. Since some polyphenolics have strong absorption from the UV to visible region, XO-inhibitory activity of polyphenolics was alternatively determined without interference by directly measuring the formation of uric acid and hydrogen peroxide using the modified CUPRAC (cupric reducing antioxidant capacity) spectrophotometric method at 450nm. The CUPRAC absorbance of the incubation solution due to the reduction of Cu(II)-neocuproine reagent by the products of the X-XO system decreased in the presence of polyphenolics, the difference being proportional to the XO inhibition ability of the tested compound. The structure-activity relationship revealed that the flavones and flavonols with a 7-hydroxyl group such as apigenin, luteolin, kaempferol, quercetin, and myricetin inhibited XO-inhibitory activity at low concentrations (IC(50) values from 1.46 to 1.90microM), while the flavan-3-ols and naringin were less inhibitory. The findings of the developed method for quercetin and catechin in the presence of catalase were statistically alike with those of HPLC. In addition to polyphenolics, five kinds of herbs were evaluated for their XO-inhibitory activity using the developed method. The proposed spectrophotometric method was practical, low-cost, rapid, and could reliably assay uric acid and hydrogen peroxide in the presence of polyphenols (flavonoids, simple phenolic acids and hydroxycinnamic acids), and less open to interferences by UV-absorbing substances.

  2. Simplified method for creating a density-absorbed dose calibration curve for the low dose range from Gafchromic EBT3 film.

    PubMed

    Gotanda, Tatsuhiro; Katsuda, Toshizo; Gotanda, Rumi; Kuwano, Tadao; Akagawa, Takuya; Tanki, Nobuyoshi; Tabuchi, Akihiko; Shimono, Tetsunori; Kawaji, Yasuyuki

    2016-01-01

    Radiochromic film dosimeters have a disadvantage in comparison with an ionization chamber in that the dosimetry process is time-consuming for creating a density-absorbed dose calibration curve. The purpose of this study was the development of a simplified method of creating a density-absorbed dose calibration curve from radiochromic film within a short time. This simplified method was performed using Gafchromic EBT3 film with a low energy dependence and step-shaped Al filter. The simplified method was compared with the standard method. The density-absorbed dose calibration curves created using the simplified and standard methods exhibited approximately similar straight lines, and the gradients of the density-absorbed dose calibration curves were -32.336 and -33.746, respectively. The simplified method can obtain calibration curves within a much shorter time compared to the standard method. It is considered that the simplified method for EBT3 film offers a more time-efficient means of determining the density-absorbed dose calibration curve within a low absorbed dose range such as the diagnostic range.

  3. Development of modern approach to absorbed dose assessment in radionuclide therapy, based on Monte Carlo method simulation of patient scintigraphy

    NASA Astrophysics Data System (ADS)

    Lysak, Y. V.; Klimanov, V. A.; Narkevich, B. Ya

    2017-01-01

    One of the most difficult problems of modern radionuclide therapy (RNT) is control of the absorbed dose in pathological volume. This research presents new approach based on estimation of radiopharmaceutical (RP) accumulated activity value in tumor volume, based on planar scintigraphic images of the patient and calculated radiation transport using Monte Carlo method, including absorption and scattering in biological tissues of the patient, and elements of gamma camera itself. In our research, to obtain the data, we performed modeling scintigraphy of the vial with administered to the patient activity of RP in gamma camera, the vial was placed at the certain distance from the collimator, and the similar study was performed in identical geometry, with the same values of activity of radiopharmaceuticals in the pathological target in the body of the patient. For correct calculation results, adapted Fisher-Snyder human phantom was simulated in MCNP program. In the context of our technique, calculations were performed for different sizes of pathological targets and various tumors deeps inside patient’s body, using radiopharmaceuticals based on a mixed β-γ-radiating (131I, 177Lu), and clear β- emitting (89Sr, 90Y) therapeutic radionuclides. Presented method can be used for adequate implementing in clinical practice estimation of absorbed doses in the regions of interest on the basis of planar scintigraphy of the patient with sufficient accuracy.

  4. High capacity image steganography method based on framelet and compressive sensing

    NASA Astrophysics Data System (ADS)

    Xiao, Moyan; He, Zhibiao

    2015-12-01

    To improve the capacity and imperceptibility of image steganography, a novel high capacity and imperceptibility image steganography method based on a combination of framelet and compressive sensing (CS) is put forward. Firstly, SVD (Singular Value Decomposition) transform to measurement values obtained by compressive sensing technique to the secret data. Then the singular values in turn embed into the low frequency coarse subbands of framelet transform to the blocks of the cover image which is divided into non-overlapping blocks. Finally, use inverse framelet transforms and combine to obtain the stego image. The experimental results show that the proposed steganography method has a good performance in hiding capacity, security and imperceptibility.

  5. A biomimetic absorbent for removal of trace level persistent organic pollutants from water.

    PubMed

    Liu, Huijuan; Qu, Jiuhui; Dai, Ruihua; Ru, Jia; Wang, Zijian

    2007-05-01

    A novel biomimetic absorbent containing the lipid triolein was developed for removing persistent organic pollutants (POPs) from water. The structural characteristics of the absorbent were obtained by SEM and a photoluminescence method. Under optimum preparation conditions, triolein was perfectly embedded in the cellulose acetate (CA) spheres, the absorbent was stable and no triolein leaked into the water. Dieldrin, endrin, aldrin and heptachlor epoxide were effectively removed by the CA--triolein absorbent in laboratory batch experiments. This suggests that CA-triolein absorbent may serve as a good absorbent for those selected POPs. Triolein in the absorbent significantly increased the absorption capacity, and lower residual concentrations of POPs were achieved when compared to the use of cellulose acetate absorbent. The absorption rate for lipophilic pollutants was very fast and exhibited some relationship with the octanol--water partition coefficient of the analyte. The absorption mechanism is discussed in detail.

  6. Comparison of a silver nanoparticle-based method and the modified spectrophotometric methods for assessing antioxidant capacity of rapeseed varieties.

    PubMed

    Szydłowska-Czerniak, Aleksandra; Tułodziecka, Agnieszka

    2013-12-01

    The antioxidant capacity of 15 rapeseed varieties was determined by the proposed silver nanoparticle-based (AgNP) method and three modified assays: ferric reducing antioxidant power (FRAP), 2,2'-diphenyl-1-picrylhydrazyl (DPPH) and Folin-Ciocalteu reducing capacity (FC). The average antioxidant capacities of the studied rapeseed cultivars ranged between 5261-9462, 3708-7112, 18864-31245 and 5816-9937 μmol sinapic acid (SA)/100g for AgNP, FRAP, DPPH and FC methods, respectively. There are significant, positive correlations between antioxidant capacities of the studied rapeseed cultivars determined by four analytical methods (r=0.5971-0.9149, p<0.05). The comparable precision for the proposed AgNP method (RSD=1.4-4.4%) and the modified FRAP, DPPH and FC methods (RSD=1.0-4.4%, 0.7-2.1% and 0.8-3.6%, respectively), demonstrate the benefit of the AgNP method in the routine analysis of antioxidant capacity of rapeseed cultivars. The principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used for discrimination the quality of the studied rapeseed varieties based on their antioxidant potential determined by different analytical methods. Three main groups were identified by HCA, while the classification and characterisation of rapeseed varieties within each of these groups were obtained from PCA. The chemometric analyses demonstrated that, rapeseed variety S13 had the highest antioxidant capacity, thus this cultivar should be considered as the richest source of natural antioxidants.

  7. Comparison of Capacity Value Methods for Photovoltaics in the Western United States

    SciTech Connect

    Madaeni, S. H.; Sioshansi, R.; Denholm, P.

    2012-07-01

    This report compares different capacity value estimation techniques applied to solar photovoltaics (PV). It compares more robust data and computationally intense reliability-based capacity valuation techniques to simpler approximation techniques at 14 different locations in the western United States. The capacity values at these locations are computed while holding the underlying power system characteristics fixed. This allows the effect of differences in solar availability patterns on the capacity value of PV to be directly ascertained, without differences in the power system confounding the results. Finally, it examines the effects of different PV configurations, including varying the orientation of a fixed-axis system and installing single- and double-axis tracking systems, on the capacity value. The capacity value estimations are done over an eight-year running from 1998 to 2005, and both long-term average capacity values and interannual capacity value differences (due to interannual differences in solar resource availability) are estimated. Overall, under the assumptions used in the analysis, we find that some approximation techniques can yield similar results to reliability-based methods such as effective load carrying capability.

  8. Evaluation of Ground Bearing Capacity Estimation Methods Based On Plate Loading Tests

    NASA Astrophysics Data System (ADS)

    Gül, Yavuz; Ceylanoğlu, Atilla

    2016-10-01

    Within the scope of this study, bearing capacities were calculated based on eleven different estimation methods in literature, using some mass and material properties for different rock units (magnetite, syenite, serpentinite, limestone, clayey limestone and gypsum) encountered in three different open-pit mines (Sivas-Ulaş Open-Pit Celestite Mine, Divriği Open-Pit Iron Mine and Kangal Open-Pit Coal Mine) around Sivas in Turkey. Through regression analyses between estimated bearing capacity values and those that had been determined as a result of plate loading tests, bearing capacity estimation methods specified in the literature were assessed. Moreover, four different equations to be used in bearing capacity estimation were proposed.

  9. Two-photon or higher-order absorbing optical materials and methods of use

    NASA Technical Reports Server (NTRS)

    Marder, Seth (Inventor); Perry, Joseph (Inventor)

    2012-01-01

    Compositions capable of simultaneous two-photon absorption and higher order absorptivities are provided. Compounds having a donor-pi-donor or acceptor-pi-acceptor structure are of particular interest, where the donor is an electron donating group, acceptor is an electron accepting group, and pi is a pi bridge linking the donor and/or acceptor groups. The pi bridge may additionally be substituted with electron donating or withdrawing groups to alter the absorptive wavelength of the structure. Also disclosed are methods of generating an excited state of such compounds through optical stimulation with light using simultaneous absorption of photons of energies individually insufficient to achieve an excited state of the compound, but capable of doing so upon simultaneous absorption of two or more such photons. Applications employing such methods are also provided, including controlled polymerization achieved through focusing of the light source(s) used.

  10. Guided-wave photodiode using through-absorber quantum-well-intermixing and methods thereof

    DOEpatents

    Skogen, Erik J.

    2016-10-25

    The present invention includes a high-speed, high-saturation power detector (e.g., a photodiode) compatible with a relatively simple monolithic integration process. In particular embodiments, the photodiode includes an intrinsic bulk absorption region, which is grown above a main waveguide core including a number of quantum wells (QWs) that are used as the active region of a phase modulator. The invention also includes methods of fabricating integrated photodiode and waveguide assemblies using a monolithic, simplified process.

  11. Fluorescence and Absorbance Spectroscopy Methods to Study Membrane Perturbations by Antimicrobial Host Defense Peptides.

    PubMed

    Arias, Mauricio; Vogel, Hans J

    2017-01-01

    Antimicrobial peptides (AMPs) are currently intensely studied because of their potential as new bactericidal and bacteriostatic agents. The mechanism of action of numerous AMPs involves the permeabilization of bacterial membranes. Several methods have been developed to study peptide-membrane interactions; in particular optical spectroscopy methods are widely used. The intrinsic fluorescence properties of the Trp indole ring in Trp-containing AMPs can be exploited by measuring the fluorescence blue shift and acrylamide-induced fluorescence quenching. One important aspect of such studies is the use of distinct models of the bacterial membrane, in most cases large unilamellar vesicles (LUVs) with different, yet well-defined, phospholipid compositions. Deploying LUVs that are preloaded with fluorescent dyes, such as calcein, also allows for the study of vesicle permeabilization by AMPs. In addition, experiments using genetically engineered live Escherichia coli cells can be used to distinguish between the effects of AMPs on the outer and inner membranes of gram-negative bacteria. In combination, these methods can provide a detailed insight into the mode of action of AMPs.

  12. Sound Absorbers

    NASA Astrophysics Data System (ADS)

    Fuchs, H. V.; Möser, M.

    Sound absorption indicates the transformation of sound energy into heat. It is, for instance, employed to design the acoustics in rooms. The noise emitted by machinery and plants shall be reduced before arriving at a workplace; auditoria such as lecture rooms or concert halls require a certain reverberation time. Such design goals are realised by installing absorbing components at the walls with well-defined absorption characteristics, which are adjusted for corresponding demands. Sound absorbers also play an important role in acoustic capsules, ducts and screens to avoid sound immission from noise intensive environments into the neighbourhood.

  13. Absorber for terahertz radiation management

    SciTech Connect

    Biallas, George Herman; Apeldoorn, Cornelis; Williams, Gwyn P.; Benson, Stephen V.; Shinn, Michelle D.; Heckman, John D.

    2015-12-08

    A method and apparatus for minimizing the degradation of power in a free electron laser (FEL) generating terahertz (THz) radiation. The method includes inserting an absorber ring in the FEL beam path for absorbing any irregular THz radiation and thus minimizes the degradation of downstream optics and the resulting degradation of the FEL output power. The absorber ring includes an upstream side, a downstream side, and a plurality of wedges spaced radially around the absorber ring. The wedges form a scallop-like feature on the innermost edges of the absorber ring that acts as an apodizer, stopping diffractive focusing of the THz radiation that is not intercepted by the absorber. Spacing between the scallop-like features and the shape of the features approximates the Bartlett apodization function. The absorber ring provides a smooth intensity distribution, rather than one that is peaked on-center, thereby eliminating minor distortion downstream of the absorber.

  14. High-capacity method for hiding data in the discrete cosine transform domain

    NASA Astrophysics Data System (ADS)

    Qazanfari, Kazem; Safabakhsh, Reza

    2013-10-01

    Steganography is the art and science of hiding data in different media such as texts, audios, images, and videos. Data hiding techniques are generally divided into two groups: spatial and frequency domain techniques. Spatial domain methods generally have low security and, as a result, are less attractive to researchers. Discrete cosine transform (DCT) is the most common transform domain used in steganography and JPEG compression. Since a large number of the DCT coefficients of JPEG images are zero, the capacity of DCT domain-based steganography methods is not very high. We present a high-capacity method for hiding messages in the DCT domain. We describe the method in two classes where the receiver has and where the receiver does not have the cover image. In each class, we consider three cases for each coefficient. By considering n coefficients, there are 3n different situations. The method embeds ⌊log2 3n⌋ bits in these n coefficients. We show that the maximum reachable capacity by our method is 58% higher than the other general steganography methods. Experimental results show that the histogram-based steganalysis methods cannot detect the stego images produced by the proposed method while the capacity is increased significantly.

  15. Corrosion resistant neutron absorbing coatings

    DOEpatents

    Choi, Jor-Shan [El Cerrito, CA; Farmer, Joseph C [Tracy, CA; Lee, Chuck K [Hayward, CA; Walker, Jeffrey [Gaithersburg, MD; Russell, Paige [Las Vegas, NV; Kirkwood, Jon [Saint Leonard, MD; Yang, Nancy [Lafayette, CA; Champagne, Victor [Oxford, PA

    2012-05-29

    A method of forming a corrosion resistant neutron absorbing coating comprising the steps of spray or deposition or sputtering or welding processing to form a composite material made of a spray or deposition or sputtering or welding material, and a neutron absorbing material. Also a corrosion resistant neutron absorbing coating comprising a composite material made of a spray or deposition or sputtering or welding material, and a neutron absorbing material.

  16. Corrosion resistant neutron absorbing coatings

    DOEpatents

    Choi, Jor-Shan; Farmer, Joseph C; Lee, Chuck K; Walker, Jeffrey; Russell, Paige; Kirkwood, Jon; Yang, Nancy; Champagne, Victor

    2013-11-12

    A method of forming a corrosion resistant neutron absorbing coating comprising the steps of spray or deposition or sputtering or welding processing to form a composite material made of a spray or deposition or sputtering or welding material, and a neutron absorbing material. Also a corrosion resistant neutron absorbing coating comprising a composite material made of a spray or deposition or sputtering or welding material, and a neutron absorbing material.

  17. Evaluation of Strip Footing Bearing Capacity Built on the Anthropogenic Embankment by Random Finite Element Method

    NASA Astrophysics Data System (ADS)

    Pieczynska-Kozlowska, Joanna

    2014-05-01

    One of a geotechnical problem in the area of Wroclaw is an anthropogenic embankment layer delaying to the depth of 4-5m, arising as a result of historical incidents. In such a case an assumption of bearing capacity of strip footing might be difficult. The standard solution is to use a deep foundation or foundation soil replacement. However both methods generate significant costs. In the present paper the authors focused their attention on the influence of anthropogenic embankment variability on bearing capacity. Soil parameters were defined on the basis of CPT test and modeled as 2D anisotropic random fields and the assumption of bearing capacity were made according deterministic finite element methods. Many repeated of the different realizations of random fields lead to stable expected value of bearing capacity. The algorithm used to estimate the bearing capacity of strip footing was the random finite element method (e.g. [1]). In traditional approach of bearing capacity the formula proposed by [2] is taken into account. qf = c'Nc + qNq + 0.5γBN- γ (1) where: qf is the ultimate bearing stress, cis the cohesion, qis the overburden load due to foundation embedment, γ is the soil unit weight, Bis the footing width, and Nc, Nq and Nγ are the bearing capacity factors. The method of evaluation the bearing capacity of strip footing based on finite element method incorporate five parameters: Young's modulus (E), Poisson's ratio (ν), dilation angle (ψ), cohesion (c), and friction angle (φ). In the present study E, ν and ψ are held constant while c and φ are randomized. Although the Young's modulus does not affect the bearing capacity it governs the initial elastic response of the soil. Plastic stress redistribution is accomplished using a viscoplastic algorithm merge with an elastic perfectly plastic (Mohr - Coulomb) failure criterion. In this paper a typical finite element mesh was assumed with 8-node elements consist in 50 columns and 20 rows. Footings width B

  18. Methodology and Method and Apparatus for Signaling with Capacity Optimized Constellations

    NASA Technical Reports Server (NTRS)

    Barsoum, Maged F. (Inventor); Jones, Christopher R. (Inventor)

    2016-01-01

    Design Methodology and Method and Apparatus for Signaling with Capacity Optimized Constellation Abstract Communication systems are described that use geometrically PSK shaped constellations that have increased capacity compared to conventional PSK constellations operating within a similar SNR band. The geometrically shaped PSK constellation is optimized based upon parallel decoding capacity. In many embodiments, a capacity optimized geometrically shaped constellation can be used to replace a conventional constellation as part of a firmware upgrade to transmitters and receivers within a communication system. In a number of embodiments, the geometrically shaped constellation is optimized for an Additive White Gaussian Noise channel or a fading channel. In numerous embodiments, the communication uses adaptive rate encoding and the location of points within the geometrically shaped constellation changes as the code rate changes.

  19. A New Pixels Flipping Method for Huge Watermarking Capacity of the Invoice Font Image

    PubMed Central

    Li, Li; Hou, Qingzheng; Lu, Jianfeng; Dai, Junping; Mao, Xiaoyang; Chang, Chin-Chen

    2014-01-01

    Invoice printing just has two-color printing, so invoice font image can be seen as binary image. To embed watermarks into invoice image, the pixels need to be flipped. The more huge the watermark is, the more the pixels need to be flipped. We proposed a new pixels flipping method in invoice image for huge watermarking capacity. The pixels flipping method includes one novel interpolation method for binary image, one flippable pixels evaluation mechanism, and one denoising method based on gravity center and chaos degree. The proposed interpolation method ensures that the invoice image keeps features well after scaling. The flippable pixels evaluation mechanism ensures that the pixels keep better connectivity and smoothness and the pattern has highest structural similarity after flipping. The proposed denoising method makes invoice font image smoother and fiter for human vision. Experiments show that the proposed flipping method not only keeps the invoice font structure well but also improves watermarking capacity. PMID:25489606

  20. A simple method for choosing the parameters of a two degree-of-freedom tuned vibration absorber

    NASA Astrophysics Data System (ADS)

    Jang, S.-J.; Brennan, M. J.; Rustighi, E.; Jung, H.-J.

    2012-10-01

    In this paper a new method for choosing the parameters of a Two degree-of-freedom (dof) tuned vibration absorber (TVA) with translational and rotational degrees of freedom is described. The dynamic stiffness approach is used to model the device, which is constrained to move in the translational direction and to rotate. The choice of the parameters involves a procedure similar to that proposed by Den Hartog in the optimization of a single dof TVA, in which the invariant (fixed) points of the frequency response function of the TVA and the host structure are used to determine the stiffness of the TVA for a given mass. In this paper the approach is extended and applied to the design of a 2dof TVA, and a numerical procedure is used to determine the optimum amount of damping. The method is simple and easy to implement. A numerical example is presented to compare the performance of the 2dof TVA designed using the method described here with the optimal 2dof TVA. It is shown that the performances of the TVAs are similar, validating the new approach.

  1. Instrumentation and method for measuring NIR light absorbed in tissue during MR imaging in medical NIRS measurements

    NASA Astrophysics Data System (ADS)

    Myllylä, Teemu S.; Sorvoja, Hannu S. S.; Nikkinen, Juha; Tervonen, Osmo; Kiviniemi, Vesa; Myllylä, Risto A.

    2011-07-01

    Our goal is to provide a cost-effective method for examining human tissue, particularly the brain, by the simultaneous use of functional magnetic resonance imaging (fMRI) and near-infrared spectroscopy (NIRS). Due to its compatibility requirements, MRI poses a demanding challenge for NIRS measurements. This paper focuses particularly on presenting the instrumentation and a method for the non-invasive measurement of NIR light absorbed in human tissue during MR imaging. One practical method to avoid disturbances in MR imaging involves using long fibre bundles to enable conducting the measurements at some distance from the MRI scanner. This setup serves in fact a dual purpose, since also the NIRS device will be less disturbed by the MRI scanner. However, measurements based on long fibre bundles suffer from light attenuation. Furthermore, because one of our primary goals was to make the measuring method as cost-effective as possible, we used high-power light emitting diodes instead of more expensive lasers. The use of LEDs, however, limits the maximum output power which can be extracted to illuminate the tissue. To meet these requirements, we improved methods of emitting light sufficiently deep into tissue. We also show how to measure NIR light of a very small power level that scatters from the tissue in the MRI environment, which is characterized by strong electromagnetic interference. In this paper, we present the implemented instrumentation and measuring method and report on test measurements conducted during MRI scanning. These measurements were performed in MRI operating rooms housing 1.5 Tesla-strength closed MRI scanners (manufactured by GE) in the Dept. of Diagnostic Radiology at the Oulu University Hospital.

  2. A new optical method coupling light polarization and Vis-NIR spectroscopy to improve the measured absorbance signal's quality of soil samples.

    NASA Astrophysics Data System (ADS)

    Gobrecht, Alexia; Bendoula, Ryad; Roger, Jean-Michel; Bellon-Maurel, Véronique

    2014-05-01

    Visible - Near-infrared spectroscopy (Vis-NIRS) is now commonly used to measure different physical and chemical parameters of soils, including carbon content. However, prediction model accuracy is insufficient for Vis-NIRS to replace routine laboratory analysis. One of the biggest issues this technique is facing up to is light scattering due to soil particles. It causes departure in the assumed linear relationship between the Absorbance spectrum and the concentration of the chemicals of interest as stated by Beer-Lambert's Law, which underpins the calibration models. Therefore it becomes essential to improve the metrological quality of the measured signal in order to optimize calibration as light/matter interactions are at the basis of the resulting linear modeling. Optics can help to mitigate scattering effect on the signal. We put forward a new optical setup coupling linearly polarized light with a Vis-NIR spectrometer to free the measured spectra from multi-scattering effect. The corrected measured spectrum was then used to compute an Absorbance spectrum of the sample, using Dahm's Equation in the frame of the Representative Layer Theory. This method has been previously tested and validated on liquid (milk+ dye) and powdered (sand + dye) samples showing scattering (and absorbing) properties. The obtained Absorbance was a very good approximation of the Beer-Lambert's law absorbance. Here, we tested the method on a set of 54 soil samples to predict Soil Organic Carbon content. In order to assess the signal quality improvement by this method, we built and compared calibration models using Partial Least Square (PLS) algorithm. The prediction model built from new Absorbance spectrum outperformed the model built with the classical Absorbance traditionally obtained with Vis-NIR diffuse reflectance. This study is a good illustration of the high influence of signal quality on prediction model's performances.

  3. Evaluating core technology capacity based on an improved catastrophe progression method: the case of automotive industry

    NASA Astrophysics Data System (ADS)

    Zhao, Shijia; Liu, Zongwei; Wang, Yue; Zhao, Fuquan

    2017-01-01

    Subjectivity usually causes large fluctuations in evaluation results. Many scholars attempt to establish new mathematical methods to make evaluation results consistent with actual objective situations. An improved catastrophe progression method (ICPM) is constructed to overcome the defects of the original method. The improved method combines the merits of the principal component analysis' information coherence and the catastrophe progression method's none index weight and has the advantage of highly objective comprehensive evaluation. Through the systematic analysis of the influencing factors of the automotive industry's core technology capacity, the comprehensive evaluation model is established according to the different roles that different indices play in evaluating the overall goal with a hierarchical structure. Moreover, ICPM is developed for evaluating the automotive industry's core technology capacity for the typical seven countries in the world, which demonstrates the effectiveness of the method.

  4. Efficient and robust method for simultaneous reconstruction of the temperature distribution and radiative properties in absorbing, emitting, and scattering media

    NASA Astrophysics Data System (ADS)

    Niu, Chun-Yang; Qi, Hong; Huang, Xing; Ruan, Li-Ming; Tan, He-Ping

    2016-11-01

    A rapid computational method called generalized sourced multi-flux method (GSMFM) was developed to simulate outgoing radiative intensities in arbitrary directions at the boundary surfaces of absorbing, emitting, and scattering media which were served as input for the inverse analysis. A hybrid least-square QR decomposition-stochastic particle swarm optimization (LSQR-SPSO) algorithm based on the forward GSMFM solution was developed to simultaneously reconstruct multi-dimensional temperature distribution and absorption and scattering coefficients of the cylindrical participating media. The retrieval results for axisymmetric temperature distribution and non-axisymmetric temperature distribution indicated that the temperature distribution and scattering and absorption coefficients could be retrieved accurately using the LSQR-SPSO algorithm even with noisy data. Moreover, the influences of extinction coefficient and scattering albedo on the accuracy of the estimation were investigated, and the results suggested that the reconstruction accuracy decreased with the increase of extinction coefficient and the scattering albedo. Finally, a non-contact measurement platform of flame temperature field based on the light field imaging was set up to validate the reconstruction model experimentally.

  5. High-power passively mode-locked Nd:YVO(4) laser using SWCNT saturable absorber fabricated by dip coating method.

    PubMed

    Tang, Chun Yin; Chai, Yang; Long, Hui; Tao, Lili; Zeng, Long Hui; Tsang, Yuen Hong; Zhang, Ling; Lin, Xuechun

    2015-02-23

    Passive mode locked laser is typically achieved by the Semiconductor Saturable absorber Mirror, SESAM, saturable absorber, which is produced by expensive and complicated metal organic chemical vapor deposition method. Carbon based single wall carbon nanotube (SWCNT), saturable absorber, is a promising material which is capable to produce stable passive mode-locking in the high power laser cavity over a wide operational wavelength range. This study has successfully demonstrated the high power mode locking laser system operating at 1 micron by using SWCNT based absorbers fabricated by dip coating method. The proposed fabrication method is practical, simple and cost effective for fabricating SWCNT saturable absorber. The demonstrated high power Nd:YVO(4) mode-locked laser operating at 1064nm have maximum output power up to 2.7W,with the 167MHz repetition rate and 3.1 ps pulse duration, respectively. The calculated output pulse energy and peak power are 16.1nJ and 5.2kW, respectively.

  6. A New Control Method of a Large-Capacity Capacitor Simulator with an Inner Series Resistor

    NASA Astrophysics Data System (ADS)

    Tanaka, Atsushi; Hiraki, Eiji; Tanaka, Toshihiko

    This paper proposes a new control method for the previously proposed large-capacity capacitor simulator, which can perform an inner series resistor of the EDLCs. In the proposed large-capacity capacitor simulator, one of three legs performs a bi-directional dc-dc converter. The others are used for a single-phase PWM rectifier. In the charging operation of the proposed large-capacity simulator, one-leg is used as a boost converter. Most power, which is stored in the proposed simulator, is injected to the utility through the PWM rectifier. In the discharging operation, the one-leg performs a buck converter. Most power, which is supplied to the load, is from the utility through the PWM rectifier. Thus the proposed simulator performs a large-capacity capacitor with an inner resistor in both charging and discharging operations. The basic principle of the proposed simulator is discussed in detail. The validity and excellent practicability of the proposed control method for the large-capacity capacitor simulator are confirmed using PSIM software.

  7. Reduction of capacity decay in vanadium flow batteries by an electrolyte-reflow method

    NASA Astrophysics Data System (ADS)

    Wang, Ke; Liu, Le; Xi, Jingyu; Wu, Zenghua; Qiu, Xinping

    2017-01-01

    Electrolyte imbalance is a major issue with Vanadium flow batteries (VFBs) as it has a significant impact on electrolyte utilization and cycle life over extended charge-discharge cycling. This work seeks to reduce capacity decay and prolong cycle life of VFBs by adopting a novel electrolyte-reflow method. Different current density and various start-up time of the method are investigated in the charge-discharge tests. The results show that the capacity decay rate is reduced markedly and the cycle life is prolonged substantially by this method. In addition, the coulomb efficiency, voltage efficiency and energy efficiency remain stable during the whole cycle life test, which indicates this method has little impact on the long lifetime performance of the VFBs. The method is low-cost, simple, effective, and can be applied in industrial VFB productions.

  8. Comparison of Accuracy in Calculation of Absorbed Dose to Patients Following Bone Scan with 99mTc-Marked Diphosphonates by Two Different Background Correction Methods

    PubMed Central

    Shahbazi-Gahrouei, Daryoush; Damoori, Mehri; Tavakoli, Mohammad Bagher; Moslehi, Masoud

    2016-01-01

    To improve the accuracy of the activity quantification and the image quality in scintigraphy, scatter correction is a vital procedure. The aim of this study is to compare the accuracy in calculation of absorbed dose to patients following bone scan with 99mTc-marked diphosphonates (99mTc-MDP) by two different methods of background correction in conjugate view method. This study involved 22 patients referring to the Nuclear Medicine Center of Shahid Chamran Hospital, Isfahan, Iran. After the injection of 99mTc-MDP, whole-body images from patients were acquired at 10, 60, 90, and 180 min. Organ activities were calculated using the conjugate view method by Buijs and conventional background correction. Finally, the absorbed dose was calculated using the Medical Internal Radiation Dosimetry (MIRD) technique. The results of this study showed that the absorbed dose per unit of injected activity (rad/mCi) ± standard deviation for pelvis bone, bladder, and kidneys by Buijs method was 0.19 ± 0.05, 0.08 ± 0.01, and 0.03 ± 0.01 and by conventional method was 0.13 ± 0.04, 0.08 ± 0.01, and 0.024 ± 0.01, respectively. This showed that Buijs background correction method had a high accuracy compared to conventional method for the estimated absorbed dose of bone and kidneys whereas, for the bladder, its accuracy was low. PMID:27014610

  9. 21 CFR 130.12 - General methods for water capacity and fill of containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false General methods for water capacity and fill of containers. 130.12 Section 130.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FOOD STANDARDS: GENERAL General Provisions § 130.12...

  10. The Capacity Profile: A Method to Classify Additional Care Needs in Children with Neurodevelopmental Disabilities

    ERIC Educational Resources Information Center

    Meester-Delver, Anke; Beelen, Anita; Hennekam, Raoul; Nollet, Frans; Hadders-Algra, Mijna

    2007-01-01

    The aim of this study was to determine the interrater reliability and stability over time of the Capacity Profile (CAP). The CAP is a standardized method for classifying additional care needs indicated by current impairments in five domains of body functions: physical health, neuromusculoskeletal and movement-related, sensory, mental, and voice…

  11. Evaluation of absorbed dose in irradiated sugar-containing plant material (peony roots) by an ESR method

    NASA Astrophysics Data System (ADS)

    Yamaoki, Rumi; Kimura, Shojiro; Ohta, Masatoshi

    2015-12-01

    The relationship between electron spin resonance (ESR) signal intensity of irradiated plant materials and sugar content was investigated by spectral analysis using peony roots. A weak background signal near g=2.005 was observed in the roots. After a 10 kGy irradiation, the ESR line broadened and the intensity increased, and the spectral characteristics were similar to a typical spectrum of irradiated food containing crystalline sugars. The free radical concentration was nearly stable 30 days after irradiation. The spectrum of peony root 30 days after irradiation was simulated using the summation of the intensities of six assumed components: radical signals derived from (a) sucrose, (b) glucose, (c) fructose, (d) cellulose, (e) the background signal near g=2.005 and (f) unidentified component. The simulated spectra using the six components were in agreement with the observed sample spectra. The intensity of sucrose radical signal in irradiated samples increased proportionally up to 20 kGy. In addition, the intensity of sucrose radical signals was strongly correlated with the sucrose contents of the samples. The results showed that the radiation sensitivity of sucrose in peony roots was influenced little by other plant constituents. There was also a good correlation between the total area of the spectra and the sucrose content, because the sucrose content was higher than that of other sugars in the samples. In peony roots, estimation of the absorbed dose from the ESR signal intensity may be possible by a calibration method based on the sucrose content.

  12. Development of a rapid and simple voltammetric method to determine total antioxidative capacity of edible oils.

    PubMed

    Gulaboski, Rubin; Mirčeski, Valentin; Mitrev, Saša

    2013-05-01

    In this work we report on a new, rapid and simple voltammetric method to determine the total antioxidant capacity (TAC) of the edible oils. The method explores the ABTS radical (2,2'-azinobis(3-ethylbenzothiazoline-6-sulphonic acid)) assay as a redox probe and it relays on measuring catalytic voltammetric currents. The electrocatalysis comprises redox regeneration of the electrochemically created ABTS(+) radical either by Trolox (6-hydroxy-2,5,7,8-tetramethychroman-2-carboxylic acid) or by antioxidants present in studied oils. The detection limit of the method is determined to be 0.5 mg/L of Trolox equivalent, being a slightly lower than the corresponding UV-VIS spectrophotometric method. Applying the proposed voltammetric method the total antioxidant capacity of three types of commercially available cold-pressed edible oils are determined, and the results are found to be in a very good agreement with those obtained by UV-VIS spectrophotometry. The reported voltammetric method is cheap, rapid and simple, and it can be used as a sustainable alternative to the UV-VIS methods for the determination of total antioxidant capacitance of oils and other liquid lipophilic nutrients. Potent antioxidant capacity of studied oils was also confirmed by electron paramagnetic resonance spectroscopy of superoxide anion produced by macrophages.

  13. A hydrostatic weighing method using total lung capacity and a small tank.

    PubMed Central

    Warner, J G; Yeater, R; Sherwood, L; Weber, K

    1986-01-01

    The purpose of this study was to establish the validity and reliability of a hydrostatic weighing method using total lung capacity (measuring vital capacity with a respirometer at the time of weighing) the prone position, and a small oblong tank. The validity of the method was established by comparing the TLC prone (tank) method against three hydrostatic weighing methods administered in a pool. The three methods included residual volume seated, TLC seated and TLC prone. Eighty male and female subjects were underwater weighed using each of the four methods. Validity coefficients for per cent body fat between the TLC prone (tank) method and the RV seated (pool), TLC seated (pool) and TLC prone (pool) methods were .98, .99 and .99, respectively. A randomised complete block ANOVA found significant differences between the RV seated (pool) method and each of the three TLC methods with respect to both body density and per cent body fat. The differences were negligible with respect to HW error. Reliability of the TLC prone (tank) method was established by weighing twenty subjects three different times with ten-minute time intervals between testing. Multiple correlations yielded reliability coefficients for body density and per cent body fat values of .99 and .99, respectively. It was concluded that the TLC prone (tank) method is valid, reliable and a favourable method of hydrostatic weighing. PMID:3697596

  14. Method 415.3, Rev. 1.2: Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water

    EPA Science Inventory

    This method provides procedures for the determination of total organic carbon (TOC), dissolved organic carbon (DOC), and UV absorption at 254 nm (UVA) in source waters and drinking waters. The DOC and UVA determinations are used in the calculation of the Specific UV Absorbance (S...

  15. Pilates Method for Lung Function and Functional Capacity in Obese Adults.

    PubMed

    Niehues, Janaina Rocha; Gonzáles, Inês; Lemos, Robson Rodrigues; Haas, Patrícia

    2015-01-01

    Obesity is defined as the condition in which the body mass index (BMI) is ≥ 30 kg/m2 and is responsible for decreased quality of life and functional limitations. The harmful effects on ventilatory function include reduced lung capacity and volume; diaphragmatic muscle weakness; decreased lung compliance and stiffness; and weakness of the abdominal muscles, among others. Pilates is a method of resistance training that works with low-impact muscle exercises and is based on isometric exercises. The current article is a review of the literature that aims to investigate the hypothesis that the Pilates method, as a complementary method of training, might be beneficial to pulmonary function and functional capacity in obese adults. The intent of the review was to evaluate the use of Pilates as an innovative intervention in the respiratory dysfunctions of obese adults. In studies with other populations, it has been observed that Pilates can be effective in improving chest capacity and expansion and lung volume. That finding is due to the fact that Pilates works through the center of force, made ​​up of the abdominal muscles and gluteus muscles lumbar, which are responsible for the stabilization of the static and dynamic body that is associated with breath control. It has been observed that different Pilates exercises increase the activation and recruitment of the abdominal muscles. Those muscles are important in respiration, both in expiration and inspiration, through the facilitation of diaphragmatic action. In that way, strengthening the abdominal muscles can help improve respiratory function, leading to improvements in lung volume and capacity. The results found in the current literature review support the authors' observations that Pilates promotes the strengthening of the abdominal muscles and that improvements in diaphragmatic function may result in positive outcomes in respiratory function, thereby improving functional capacity. However, the authors did not

  16. Powder-based adsorbents having high adsorption capacities for recovering dissolved metals and methods thereof

    DOEpatents

    Janke, Christopher J.; Dai, Sheng; Oyola, Yatsandra

    2016-05-03

    A powder-based adsorbent and a related method of manufacture are provided. The powder-based adsorbent includes polymer powder with grafted side chains and an increased surface area per unit weight to increase the adsorption of dissolved metals, for example uranium, from aqueous solutions. A method for forming the powder-based adsorbent includes irradiating polymer powder, grafting with polymerizable reactive monomers, reacting with hydroxylamine, and conditioning with an alkaline solution. Powder-based adsorbents formed according to the present method demonstrated a significantly improved uranium adsorption capacity per unit weight over existing adsorbents.

  17. Foam-based adsorbents having high adsorption capacities for recovering dissolved metals and methods thereof

    DOEpatents

    Janke, Christopher J.; Dai, Sheng; Oyola, Yatsandra

    2015-06-02

    Foam-based adsorbents and a related method of manufacture are provided. The foam-based adsorbents include polymer foam with grafted side chains and an increased surface area per unit weight to increase the adsorption of dissolved metals, for example uranium, from aqueous solutions. A method for forming the foam-based adsorbents includes irradiating polymer foam, grafting with polymerizable reactive monomers, reacting with hydroxylamine, and conditioning with an alkaline solution. Foam-based adsorbents formed according to the present method demonstrated a significantly improved uranium adsorption capacity per unit weight over existing adsorbents.

  18. Improved rapid methods for the determination of iron content and binding capacity of serum.

    PubMed

    BEALE, R N; BOSTROM, J O; TAYLOR, R F

    1962-03-01

    Improved methods are described for the determination of serum iron (SeFe) and latent iron-binding capacity under controlled conditions of pH. As before, no precipitation or heating of the serum is required, and controls are not used. Unbuffered sulphonated bathophenanthroline is employed for colour development. Statistical data for 40 normals are presented and comparisons with other data are given; the effects of ageing of serum are studied.

  19. Fractional absorption of active absorbable algal calcium (AAACa) and calcium carbonate measured by a dual stable-isotope method

    Technology Transfer Automated Retrieval System (TEKTRAN)

    With the use of stable isotopes, this study aimed to compare the bioavailability of active absorbable algal calcium (AAACa), obtained from oyster shell powder heated to a high temperature, with an additional heated seaweed component (Heated Algal Ingredient, HAI), with that of calcium carbonate. In ...

  20. Evaluation of injection methods for fast, high peak capacity separations with low thermal mass gas chromatography.

    PubMed

    Fitz, Brian D; Mannion, Brandyn C; To, Khang; Hoac, Trinh; Synovec, Robert E

    2015-05-01

    Low thermal mass gas chromatography (LTM-GC) was evaluated for rapid, high peak capacity separations with three injection methods: liquid, headspace solid phase micro-extraction (HS-SPME), and direct vapor. An Agilent LTM equipped with a short microbore capillary column was operated at a column heating rate of 250 °C/min to produce a 60s separation. Two sets of experiments were conducted in parallel to characterize the instrumental platform. First, the three injection methods were performed in conjunction with in-house built high-speed cryo-focusing injection (HSCFI) to cryogenically trap and re-inject the analytes onto the LTM-GC column in a narrower band. Next, the three injection methods were performed natively with LTM-GC. Using HSCFI, the peak capacity of a separation of 50 nl of a 73 component liquid test mixture was 270, which was 23% higher than without HSCFI. Similar peak capacity gains were obtained when using the HSCFI with HS-SPME (25%), and even greater with vapor injection (56%). For the 100 μl vapor sample injected without HSCFI, the preconcentration factor, defined as the ratio of the maximum concentration of the detected analyte peak relative to the analyte concentration injected with the syringe, was determined to be 11 for the earliest eluting peak (most volatile analyte). In contrast, the preconcentration factor for the earliest eluting peak using HSCFI was 103. Therefore, LTM-GC is demonstrated to natively provide in situ analyte trapping, although not to as great an extent as with HSCFI. We also report the use of LTM-GC applied with time-of-flight mass spectrometry (TOFMS) detection for rapid, high peak capacity separations from SPME sampled banana peel headspace.

  1. Identification of phenolic compounds in petals of nasturtium flowers (Tropaeolum majus) by high-performance liquid chromatography coupled to mass spectrometry and determination of oxygen radical absorbance capacity (ORAC).

    PubMed

    Garzón, G Astrid; Manns, David C; Riedl, Ken; Schwartz, Steven J; Padilla-Zakour, Olga

    2015-02-18

    The contents and profile of polyphenols were analyzed in edible petals of nasturtium flowers (Tropaeolum majus) of three colors, and their oxygen radical absorbance capacities (ORAC) were compared. Three primary anthocyanins (ACNs) and 15 non-ACN phenolic compounds including hydroxycinammic acids (HCAs) and flavonoids (myricetin, quercetin, and kaempferol derivatives) were detected. Anthocyanin concentration was within 31.9 ± 21.7 and 114.5 ± 2.3 mg cyanidin-3-glucoside (cy-3-glu)/100 g fresh weight (FW) in yellow and red petals, respectively. The concentration of HCAs varied between 33.3 ± 7.1 and 235.6 ± 8.1 mg chlorogenic acid equivalents/100 g FW for red and yellow flowers, respectively. Red flowers had the highest level of flavonoids (315.1 ± 2.4 mg myricetin equivalents/100 g FW) and the highest ORAC radical-scavenging activity. These results show the diversity and abundance of polyphenolic compounds in nasturtium flowers, which could be the basis for applications in functional foods, cosmetics, and pharmaceuticals.

  2. Broadband patterned magnetic microwave absorber

    SciTech Connect

    Li, Wei; Wu, Tianlong; Wang, Wei; Guan, Jianguo; Zhai, Pengcheng

    2014-07-28

    It is a tough task to greatly improve the working bandwidth for the traditional flat microwave absorbers because of the restriction of available material parameters. In this work, a simple patterning method is proposed to drastically broaden the absorption bandwidth of a conventional magnetic absorber. As a demonstration, an ultra-broadband microwave absorber with more than 90% absorption in the frequency range of 4–40 GHz is designed and experimentally realized, which has a thin thickness of 3.7 mm and a light weight equivalent to a 2-mm-thick flat absorber. In such a patterned absorber, the broadband strong absorption is mainly originated from the simultaneous incorporation of multiple λ/4 resonances and edge diffraction effects. This work provides a facile route to greatly extend the microwave absorption bandwidth for the currently available absorbing materials.

  3. Training and capacity building evaluation: Maximizing resources and results with Success Case Method.

    PubMed

    Medina, L; Acosta-Pérez, E; Velez, C; Martínez, G; Rivera, M; Sardiñas, L; Pattatucci, A

    2015-10-01

    This article describes the use of Success Case Method (Brinkerhoff, 2003) to evaluate health promotion and public health training programs. The goal of the Office Community Research and Engagement (OCRE) of the Puerto Rico Clinical and Translational Research Consortium (PRCTRC) is to establish a stable and sustainable translational research capacity. Early efforts toward achieving this goal included sponsoring two independent research training programs. A description of the implementation of the five step Success Case Method is presented. Results reveal that SCM would deem both trainings as highly successful, based upon the overall impact of a low number of success cases. However, a traditional summative evaluation would consider this disappointing. Strengths of SCM are discussed. It was concluded that the Success Case Method is a useful and valuable evaluative method for measuring the success of health promotion and public health training initiatives and provides sufficient information for decision-making processes.

  4. A Method for Scheduling Air Traffic with Uncertain En Route Capacity Constraints

    NASA Technical Reports Server (NTRS)

    Arneson, Heather; Bloem, Michael

    2009-01-01

    A method for scheduling ground delay and airborne holding for flights scheduled to fly through airspace with uncertain capacity constraints is presented. The method iteratively solves linear programs for departure rates and airborne holding as new probabilistic information about future airspace constraints becomes available. The objective function is the expected value of the weighted sum of ground and airborne delay. In order to limit operationally costly changes to departure rates, they are updated only when such an update would lead to a significant cost reduction. Simulation results show a 13% cost reduction over a rough approximation of current practices. Comparison between the proposed as needed replanning method and a similar method that uses fixed frequency replanning shows a typical cost reduction of 1% to 2%, and even up to a 20% cost reduction in some cases.

  5. A Multipurpose Method for Global Capacity Building in Using Earth Observations for Wetlands and Biodiversity

    NASA Astrophysics Data System (ADS)

    Bye, B. L.

    2015-12-01

    Monitoring and surveying biodiversity and wetlands involves the collection of vast amounts of data, most of which are Earth observations. Observations on the ground or from space and everything in between, across all time and spatial scales, represent precious information for our understanding and management of both biodiversity and wetlands. Cross-disciplinary problem solving and development of new tools are the most efficient ways to enhance our capabilities to monitor biodiversity and wetlands. To accomplish that, experts from different communities need to refresh and upgrade their knowledge of other field(s). An event based method that consists of both live active participation and the production of capacity building material for re-use in other settings, will be presented. The method includes using the vast global networks of international organizations representing the application areas as well as the field of Earth observations. An example from a cooperation between the Group of Earth Observations and the Ramsar Convention of Wetlands will be used to illustrate the method. Within the global Earth observation community there is a great potential for efficient capacity building, targeting both experts, decision-makers and the general public. The method presented is demonstrating one way of tapping into that potential.

  6. Load controller and method to enhance effective capacity of a photovoltaic power supply

    DOEpatents

    Perez, Richard

    2000-01-01

    A load controller and method are provided for maximizing effective capacity of a non-controllable, renewable power supply coupled to a variable electrical load also coupled to a conventional power grid. Effective capacity is enhanced by monitoring power output of the renewable supply and loading, and comparing the loading against the power output and a load adjustment threshold determined from an expected peak loading. A value for a load adjustment parameter is calculated by subtracting the renewable supply output and the load adjustment parameter from the current load. This value is then employed to control the variable load in an amount proportional to the value of the load control parameter when the parameter is within a predefined range. By so controlling the load, the effective capacity of the non-controllable, renewable power supply is increased without any attempt at operational feedback control of the renewable supply. The renewable supply may comprise, for example, a photovoltaic power supply or a wind-based power supply.

  7. Carbon dioxide absorbents for rebreather diving.

    PubMed

    Pennefather, John

    2016-09-01

    Firstly I would like to thank SPUMS members for making me a Life Member of SPUMS; I was surprised and greatly honoured by the award. I also want to confirm and expand on the findings on carbon dioxide absorbents reported by David Harvey et al. For about 35 years, I was the main player in deciding which absorbent went into Australian Navy and Army diving sets. On several occasions, suppliers of absorbents to the anaesthesia market tried to supply the Australian military market. On no occasion did they provide absorbent that came close to the minimum absorbent capacity required, generally being 30-40% less efficient than diving-grade absorbents. Because I regard lives as being more important than any likely dollar saving, the best absorbent was always selected unless two suppliers provided samples with the same absorbent capacity. On almost every occasion, there was a clear winner and cost was never considered. I suggest the same argument for the best absorbent should be used by members and their friends who dive using rebreather sets. I make this point because of my findings on a set that was brought to me after the death of its owner. The absorbent was not the type or grain size recommended by the manufacturer of the set and did not resemble any of the diving grade absorbents I knew of. I suspected by its appearance that it was anaesthetic grade absorbent. When I tested the set, the absorbent system failed very quickly so it is likely that carbon dioxide toxicity contributed to his death. The death was not the subject of an inquest and I have no knowledge of how the man obtained the absorbent. Possibly there was someone from an operating theatre staff who unintentionally caused their friend's death by supplying him with 'borrowed absorbent'. I make this point as I would like to discourage members from making a similar error.

  8. Method for outlier detection: a tool to assess the consistency between laboratory data and ultraviolet-visible absorbance spectra in wastewater samples.

    PubMed

    Zamora, D; Torres, A

    2014-01-01

    Reliable estimations of the evolution of water quality parameters by using in situ technologies make it possible to follow the operation of a wastewater treatment plant (WWTP), as well as improving the understanding and control of the operation, especially in the detection of disturbances. However, ultraviolet (UV)-Vis sensors have to be calibrated by means of a local fingerprint laboratory reference concentration-value data-set. The detection of outliers in these data-sets is therefore important. This paper presents a method for detecting outliers in UV-Vis absorbances coupled to water quality reference laboratory concentrations for samples used for calibration purposes. Application to samples from the influent of the San Fernando WWTP (Medellín, Colombia) is shown. After the removal of outliers, improvements in the predictability of the influent concentrations using absorbance spectra were found.

  9. Two new methods used to simulate the circumferential solar flux density concentrated on the absorber of a parabolic trough solar collector

    NASA Astrophysics Data System (ADS)

    Guo, Minghuan; Wang, Zhifeng; Sun, Feihu

    2016-05-01

    The optical efficiencies of a solar trough concentrator are important to the whole thermal performance of the solar collector, and the outer surface of the tube absorber is a key interface of energy flux. So it is necessary to simulate and analyze the concentrated solar flux density distributions on the tube absorber of a parabolic trough solar collector for various sun beam incident angles, with main optical errors considered. Since the solar trough concentrators are linear focusing, it is much of interest to investigate the solar flux density distribution on the cross-section profile of the tube absorber, rather than the flux density distribution along the focal line direction. Although a few integral approaches based on the "solar cone" concept were developed to compute the concentrated flux density for some simple trough concentrator geometries, all those integral approaches needed special integration routines, meanwhile, the optical parameters and geometrical properties of collectors also couldn't be changed conveniently. Flexible Monte Carlo ray trace (MCRT) methods are widely used to simulate the more accurate concentrated flux density distribution for compound parabolic solar trough concentrators, while generally they are quite time consuming. In this paper, we first mainly introduce a new backward ray tracing (BRT) method combined with the lumped effective solar cone, to simulate the cross-section flux density on the region of interest of the tube absorber. For BRT, bundles of rays are launched at absorber-surface points of interest, directly go through the glass cover of the absorber, strike on the uniformly sampled mirror segment centers in the close-related surface region of the parabolic reflector, and then direct to the effective solar cone around the incident sun beam direction after the virtual backward reflection. All the optical errors are convoluted into the effective solar cone. The brightness distribution of the effective solar cone is supposed

  10. Automatic method for the determination of Folin-Ciocalteu reducing capacity in food products.

    PubMed

    Magalhães, Luís M; Segundo, Marcela A; Reis, Salette; Lima, José L F C; Rangel, António O S S

    2006-07-26

    In the present work, an automatic flow procedure based on multi-syringe flow injection analysis was developed for the assessment of Folin-Ciocalteu reagent (FCR) reducing capacity in several types of food products using gallic acid as the standard. Different strategies for mixing of sample and reagent were tested (continuous flow of FCR, merging zones, and intercalated zones approaches); lower reagent consumption and higher determination throughput were attained for the merging zones approach (100 microL of sample+100 microL of FCR). The application of the proposed method to compounds with known antioxidant activity (both phenolic and nonphenolic) and to samples (wines, beers, teas, soft drinks, and fruit juices) provided results similar to those obtained by the conventional batch method. The detection limit was 0.6 mg L-1, and the determination frequency was about 12 h-1. Good repeatability was attained (RSD<1.3%, n=10).

  11. The antioxidant capacity of milk--the application of different methods in vitro and in vivo.

    PubMed

    Cloetens, L; Panee, J; Åkesson, B

    2013-11-03

    Milk contains a wide array of compounds with established or putative pro- or anti-oxidant function. The functions of these compounds have been intensively studied. This review focusses on some important aspects in this wide field namely the methodology for measurement of the total antioxidant capacity (TAC), the content of TAC and some related compounds in human and animal milks and infant formulas, and the effect of milk intake on antioxidant status in the body and on the activity of dietary flavonoids as studied in vitro and in vivo. Regarding methodology TAC in milk can be measured by spectrophotometric and electrochemical methods and some of their characteristics are reviewed. Milk, whey, high-molecular-weight and low-molecular-weight (LMW) fractions of whey have all been found to have antioxidant capacity using these techniques. The major antioxidant in the LMW fraction has been identified as urate. An extensive literature survey was made regarding data on the antioxidant capacity and related variables of milk obtained from different sources (human milk, infant formulas and animal milk) and subjected to different treatments. Differences in TAC between milks from different sources have been observed but due to the variety of techniques used no clear pattern is evident at present. Another important aspect is the putative effects of the intake of milk products on the antioxidant status of the consumer. A few studies performed in adults and premature infants are reviewed and it is stated that too little information is available to make any firm conclusions in this regard. Finally, a high interest has been devoted to the possible interference of milk with the antioxidant properties of flavonoid-rich food like tea. Most in vitro studies show an inhibition by milk on tea flavonoid activity whereas the results from the corresponding in vivo studies are equivocal. Our general conclusion is that several compounds in various milk fractions contribute to the antioxidant

  12. Novel total antioxidant capacity index for dietary polyphenols and vitamins C and E, using their cupric ion reducing capability in the presence of neocuproine: CUPRAC method.

    PubMed

    Apak, Resat; Güçlü, Kubilay; Ozyürek, Mustafa; Karademir, Saliha Esin

    2004-12-29

    The chemical diversity of antioxidants makes it difficult to separate and quantify antioxidants from the vegetable matrix. Therefore, it is desirable to establish a method that can measure the total antioxidant activity level directly from vegetable extracts. The current literature clearly states that there is no "total antioxidant" as a nutritional index available for food labeling because of the lack of standard quantitation methods. Thus, this work reports the development of a simple, widely applicable antioxidant capacity index for dietary polyphenols and vitamins C and E, utilizing the copper(II)-neocuproine [Cu(II)-Nc] reagent as the chromogenic oxidizing agent. Because the copper(II) (or cupric) ion reducing ability of polyphenols is measured, the method is named by our research group "cupric reducing antioxidant capacity" abbreviated as the CUPRAC method. This method should be advantageous over the ferric reducing antioxidant power (FRAP) method because the redox chemistry of copper(II)-as opposed to that of ferric ion-involves faster kinetics. The method comprises mixing of the antioxidant solution (directly or after acid hydrolysis) with a copper(II) chloride solution, a neocuproine alcoholic solution, and an ammonium acetate aqueous buffer at pH 7 and subsequent measurement of the developed absorbance at 450 nm after 30 min. Because the color development is fast for compounds such as ascorbic acid, gallic acid, and quercetin but slow for naringin and naringenin, the latter compounds were assayed after incubation at 50 degrees C on a water bath for 20 min [after Cu(II)-Nc reagent addition] so as to force the oxidation reaction to reach completion. The flavonoid glycosides were hydrolyzed to their corresponding aglycons by refluxing in 1.2 M HCl-containing 50% MeOH so as to exert maximal reducing power toward Cu(II)-Nc. Certain compounds also needed incubation after acid hydrolysis to fully exhibit their reducing capability. The CUPRAC antioxidant

  13. A 3D Monte Carlo Method for Estimation of Patient-specific Internal Organs Absorbed Dose for 99mTc-hynic-Tyr3-octreotide Imaging

    PubMed Central

    Momennezhad, Mehdi; Nasseri, Shahrokh; Zakavi, Seyed Rasoul; Parach, Ali Asghar; Ghorbani, Mahdi; Asl, Ruhollah Ghahraman

    2016-01-01

    Single-photon emission computed tomography (SPECT)-based tracers are easily available and more widely used than positron emission tomography (PET)-based tracers, and SPECT imaging still remains the most prevalent nuclear medicine imaging modality worldwide. The aim of this study is to implement an image-based Monte Carlo method for patient-specific three-dimensional (3D) absorbed dose calculation in patients after injection of 99mTc-hydrazinonicotinamide (hynic)-Tyr3-octreotide as a SPECT radiotracer. 99mTc patient-specific S values and the absorbed doses were calculated with GATE code for each source-target organ pair in four patients who were imaged for suspected neuroendocrine tumors. Each patient underwent multiple whole-body planar scans as well as SPECT imaging over a period of 1-24 h after intravenous injection of 99mhynic-Tyr3-octreotide. The patient-specific S values calculated by GATE Monte Carlo code and the corresponding S values obtained by MIRDOSE program differed within 4.3% on an average for self-irradiation, and differed within 69.6% on an average for cross-irradiation. However, the agreement between total organ doses calculated by GATE code and MIRDOSE program for all patients was reasonably well (percentage difference was about 4.6% on an average). Normal and tumor absorbed doses calculated with GATE were slightly higher than those calculated with MIRDOSE program. The average ratio of GATE absorbed doses to MIRDOSE was 1.07 ± 0.11 (ranging from 0.94 to 1.36). According to the results, it is proposed that when cross-organ irradiation is dominant, a comprehensive approach such as GATE Monte Carlo dosimetry be used since it provides more reliable dosimetric results. PMID:27134562

  14. A 3D Monte Carlo Method for Estimation of Patient-specific Internal Organs Absorbed Dose for (99m)Tc-hynic-Tyr(3)-octreotide Imaging.

    PubMed

    Momennezhad, Mehdi; Nasseri, Shahrokh; Zakavi, Seyed Rasoul; Parach, Ali Asghar; Ghorbani, Mahdi; Asl, Ruhollah Ghahraman

    2016-01-01

    Single-photon emission computed tomography (SPECT)-based tracers are easily available and more widely used than positron emission tomography (PET)-based tracers, and SPECT imaging still remains the most prevalent nuclear medicine imaging modality worldwide. The aim of this study is to implement an image-based Monte Carlo method for patient-specific three-dimensional (3D) absorbed dose calculation in patients after injection of (99m)Tc-hydrazinonicotinamide (hynic)-Tyr(3)-octreotide as a SPECT radiotracer. (99m)Tc patient-specific S values and the absorbed doses were calculated with GATE code for each source-target organ pair in four patients who were imaged for suspected neuroendocrine tumors. Each patient underwent multiple whole-body planar scans as well as SPECT imaging over a period of 1-24 h after intravenous injection of (99m)hynic-Tyr(3)-octreotide. The patient-specific S values calculated by GATE Monte Carlo code and the corresponding S values obtained by MIRDOSE program differed within 4.3% on an average for self-irradiation, and differed within 69.6% on an average for cross-irradiation. However, the agreement between total organ doses calculated by GATE code and MIRDOSE program for all patients was reasonably well (percentage difference was about 4.6% on an average). Normal and tumor absorbed doses calculated with GATE were slightly higher than those calculated with MIRDOSE program. The average ratio of GATE absorbed doses to MIRDOSE was 1.07 ± 0.11 (ranging from 0.94 to 1.36). According to the results, it is proposed that when cross-organ irradiation is dominant, a comprehensive approach such as GATE Monte Carlo dosimetry be used since it provides more reliable dosimetric results.

  15. Precise calculation of the triple-α reaction rates using the transmission-free complex absorbing potential method

    NASA Astrophysics Data System (ADS)

    Suno, Hiroya; Suzuki, Yasuyuki; Descouvemont, Pierre

    2016-11-01

    We study the triple-α reaction process at low temperatures, which is known to play an important role in stellar physics. The Schrödinger equation for three α particles is solved by using hyperspherical coordinates, while a complex absorbing potential is introduced in order to describe correctly the three-body continuum states. We use an angular-momentum-independent α -α potential and introduce three-body potentials to reproduce the energies of both the Hoyle state and the first 2+ state. The triple-α reaction rate is computed accurately at temperatures from T =0.01 to 10 GK and compared with those available in the literature. Our reaction rate is found to be up to three orders of magnitude larger than the NACRE rate at low temperatures T ≈0.01 GK, while we find a reasonable agreement between them at higher temperatures T ≳0.1 GK.

  16. Methodology and method and appartus for signaling with capacity optimized constellations

    NASA Technical Reports Server (NTRS)

    Barsoum, Maged F. (Inventor); Jones, Christopher R. (Inventor)

    2012-01-01

    Communication systems are described that use geometrically shaped constellations that have increased capacity compared to conventional constellations operating within a similar SNR band. In several embodiments, the geometrically shaped is optimized based upon a capacity measure such as parallel decoding capacity or joint capacity. In many embodiments, a capacity optimized geometrically shaped constellation can be used to replace a conventional constellation as part of a firmware upgrade to transmitters and receivers within a communication system. In a number of embodiments, the geometrically shaped constellation is optimized for an Additive White Gaussian Noise channel or a fading channel.

  17. Immobilized chitosan as a selective absorbent for the nickel removal in water sample.

    PubMed

    Wu, Jian-Min; Wang, Yong-Yao

    2003-09-01

    Method for preparation of chitosan immobilized on silica gel (CTS-silica) was described. The CTS-silica was used as absorbent for the absorption of nickel in water. The results showed that this absorbent had relatively high selectivity and strong affinity to nickel. The maximum absorption capacity for nickel can reach 667 mg/g of chitosan. Factors that affect the absorption capacity, such as pH, ion strength and the presence of calcium, EDTA and the mechanism of absorption were discussed in detail. The absorbent can be regenerated with acid and reused for several times. The recovery rate for nickel can reach 99.99%. This absorbent filled in a column can be used in nickel removal from wastewater and drinking water.

  18. Calibration method for a photoacoustic system for real time source apportionment of light absorbing carbonaceous aerosol based on size distribution measurements

    NASA Astrophysics Data System (ADS)

    Utry, Noemi; Ajtai, Tibor; Pinter, Mate; Orvos, Peter I.; Szabo, Gabor; Bozoki, Zoltan

    2016-04-01

    In this study, we introduce a calibration method with which sources of light absorbing carbonaceous particulate matter (LAC) can be apportioned in real time based on multi wavelength optical absorption measurements with a photoacoustic system. The method is primary applicable in wintry urban conditions when LAC is dominated by traffic and biomass burning. The proposed method was successfully tested in a field campaign in the city center of Szeged, Hungary during winter time where the dominance of traffic and wood burning aerosol has been experimentally demonstrated earlier. With the help of the proposed calibration method a relationship between the measured Aerosol Angström Exponent (AAE) and the number size distribution can be deduced. Once the calibration curve is determined, the relative strength of the two pollution sources can be deduced in real time as long as the light absorbing fraction of PM is exclusively related to traffic and wood burning. This assumption is indirectly confirmed in the presented measurement campaign by the fact that the measured size distribution is composed of two unimodal size distributions identified to correspond to traffic and wood burning aerosols. The proposed method offers the possibility of replacing laborious chemical analysis with simple in-situ measurement of aerosol size distribution data.

  19. Comparison of different methods for measuring water holding capacity and juiciness of pork versus on-line screening methods.

    PubMed

    Van Oeckel, M J; Warnants, N; Boucqué, C V

    1999-04-01

    The extent to which water holding capacity (WHC) techniques: filter paper press method, drip loss and filter paper method, are related to the sensory juiciness appreciation of pork was studied. Additionally four on-line methods: pH1, FOP1 (light scattering), PQM1 (conductivity) and DDLT (Double Density Light Transmission), were evaluated for their ability to predict WHC and juiciness scores. One-hundred and twenty samples of m. longissimus thoracis et lumborum, from animals of different genotypes, were involved in this study. Only WHC results, determined by the filter paper press method, were significantly correlated with juiciness scores (r=-0.24). The results of the filter paper method, either by weighing or visual judging, could not be predicted by the on-line methods. The results of the filter paper press method (F.p.p.-RZ) and drip loss were slightly better correlated with DDLT (respectively, r=0.56 and 0.45) than with PQM1 (r=0.51 and 0.36), FOP1 (r=0.48 and 0.34) and pH1 (r=0.41 and 0.34), although the standard error of estimate of the linear regressions was similar for the four on-line methods. Unfortunately, the on-line techniques incorrectly predicted several WHCs. Juiciness was slightly or not related to the on-line methods. The DDLT technique, which is analogous to the CGM (Capteur Gras/Maigre), an officially accepted carcass grading apparatus in France and Belgium, is as good or better than the classical on-line instruments: pH, FOP and PQM, in predicting WHC.

  20. Fiber-based adsorbents having high adsorption capacities for recovering dissolved metals and methods thereof

    DOEpatents

    Janke, Christopher J.; Dai, Sheng; Oyola, Yatsandra

    2016-09-06

    A fiber-based adsorbent and a related method of manufacture are provided. The fiber-based adsorbent includes polymer fibers with grafted side chains and an increased surface area per unit weight over known fibers to increase the adsorption of dissolved metals, for example uranium, from aqueous solutions. The polymer fibers include a circular morphology in some embodiments, having a mean diameter of less than 15 microns, optionally less than about 1 micron. In other embodiments, the polymer fibers include a non-circular morphology, optionally defining multiple gear-shaped, winged-shaped or lobe-shaped projections along the length of the polymer fibers. A method for forming the fiber-based adsorbents includes irradiating high surface area polymer fibers, grafting with polymerizable reactive monomers, reacting the grafted fibers with hydroxylamine, and conditioning with an alkaline solution. High surface area fiber-based adsorbents formed according to the present method demonstrated a significantly improved uranium adsorption capacity per unit weight over existing adsorbents.

  1. Fiber-based adsorbents having high adsorption capacities for recovering dissolved metals and methods thereof

    DOEpatents

    Janke, Christopher J; Dai, Sheng; Oyola, Yatsandra

    2014-05-13

    A fiber-based adsorbent and a related method of manufacture are provided. The fiber-based adsorbent includes polymer fibers with grafted side chains and an increased surface area per unit weight over known fibers to increase the adsorption of dissolved metals, for example uranium, from aqueous solutions. The polymer fibers include a circular morphology in some embodiments, having a mean diameter of less than 15 microns, optionally less than about 1 micron. In other embodiments, the polymer fibers include a non-circular morphology, optionally defining multiple gear-shaped, winged-shaped or lobe-shaped projections along the length of the polymer fibers. A method for forming the fiber-based adsorbents includes irradiating high surface area polymer fibers, grafting with polymerizable reactive monomers, reacting the grafted fibers with hydroxylamine, and conditioning with an alkaline solution. High surface area fiber-based adsorbents formed according to the present method demonstrated a significantly improved uranium adsorption capacity per unit weight over existing adsorbents.

  2. Methods for providing ceramic matrix composite components with increased thermal capacity

    NASA Technical Reports Server (NTRS)

    Steibel, James Dale (Inventor); Utah, David Alan (Inventor)

    2001-01-01

    A method for enhancing the cooling capability of a turbine component made from a ceramic matrix composite. The method improves the thermal performance of the component by producing a surface having increased cooling capacity, thereby allowing the component to operate at a higher temperature. The method tailors the available surface area on the cooling surface of the composite component by depositing a particulate layer of coarse grained ceramic powders of preselected size onto the surface of the ceramic matrix composite component. The size of the particulate is selectively tailored to match the desired surface finish or surface roughness of the article. The article may be designed to have different surface finishes for different locations, so that the application of different sized powders can provide different cooling capabilities at different locations, if desired. The compositions of the particulates are chemically compatible with the ceramic material comprising the outer surface or portion of the ceramic matrix composite. The particulates are applied using a slurry and incorporated into the article by heating to an elevated temperature without melting the matrix, the particulates or the fiber reinforcement.

  3. Semiautomated method for cation-exchange capacity determination of reservoir rocks

    SciTech Connect

    Gall, B.L.; Raible, C.J.; Volk, L.J.

    1983-04-01

    The presence of significant amounts of clay in tight-gas sand formations makes the determination of cation exchange capacities (CEC) important for electric-log, self potential (SP), and gamma ray log interpretation. In the past, CEC measurements have been difficult and time-consuming to obtain. However, an automated method that avoids many difficulties of other techniques while determining the CEC's of many samples at one time has been described by Worthington. This work is a modification of the work done by Worthington. Easily assembled commercial equipment instead of specially built equipment is used to agitate rock samples contained in dialysis membrane bags during ion exchange with barium acetate solution and during washing of the samples to remove excess barium ions. Barium acetate is used as the source of barium ions instead of barium chloride, which is used in Worthington's procedure, to avoid corrosion of the stainless steel equipment. The amount of barium ions on the rock samples is then determined by conductometric titration with magnesium sulfate. The titration procedure is not automated. In addition, the use of the barium ion method was extended to samples with CEC values an order of magnitude lower than those determined by Worthington. Most measured CEC's for the western tight-gas sands ranged from 0.5 to 10 meq/100 g with a few to 19 meg/100 g. A comparison of barium acetate, adsorbed water, and ammonium acetate methods for determining CEC's is made.

  4. A multi-residue method for the determination of pesticides in tea using multi-walled carbon nanotubes as a dispersive solid phase extraction absorbent.

    PubMed

    Hou, Xue; Lei, Shaorong; Qiu, Shiting; Guo, Lingan; Yi, Shengguo; Liu, Wei

    2014-06-15

    A modified QuEChERS (quick, easy, cheap, effective, rugged and safe) method using multi-walled carbon nanotubes (MWCNTs) as a dispersive solid phase extraction (d-SPE) absorbent was established for analysis of 78 pesticide residues in tea. A 6 mg MWCNT sample was selected as the optimised amount based on the distribution of pesticide recoveries and clean-up efficiency from 6 mL acetonitrile extracts. The matrix effects of the method were evaluated and matrix-matched calibration was recommended. The method was validated employing gas chromatography coupled to tandem mass spectrometry (GC-MS/MS) at the spiked concentration levels of 0.05, 0.1 and 0.15 mg kg(-1). For most of the targeted pesticides, the percent recoveries range from 70% to 120%, with relative standard deviations (RSDs) <20%. The linear correlation coefficients (r(2)) were higher than 0.99 at concentration levels of 0.025-0.500 mg kg(-1). In this study, MWCNTs were proved to be a promising d-SPE absorbent with excellent cleanup efficiency, which could be widely applied for the analysis of pesticide residues.

  5. Effect of drying methods on total antioxidant capacity of bitter gourd (momordica charantia) fruit

    NASA Astrophysics Data System (ADS)

    Tan, Ee Shian; Abdullah, Aminah; Maskat, Mohammad Yusof

    2013-11-01

    The effect of thermal and non-thermal drying methods on hydrophilic and lipophilic antioxidant capacities of bitter gourd fruit was investigated in this study. The bitter gourd fruits were dried by following methods: (i) oven drying 40°C, (ii) oven drying 50°C, (iii) oven drying 60°C, (iv) microwave drying (medium low power), (v) microwave drying (medium power) and (vi) freeze drying. Pure acetone and hexane were used to extract the hydrophilic and lipophilic antioxidant compounds from dried bitter gourd fruits. Freeze dried extracts reported to have highest values in DPPH scavenging activity (hydrophilic and lipophilic fractions), FRAP (lipophilic fraction) and TPC (hydrophilic and lipophilic fraction). Thermal drying slightly increased the values of DPPH scavenging activity, FRAP and TPC assays for hydrophilic extracts. Results concluded bitter gourd fruit is a good source of natural antioxidants and its total antioxidant quality was most preserved by freeze drying. Additionally, the higher value reported in DPPH scavenging activity, FRAP and TPC assays for lipophilic extracts than the hydrophilic extracts suggested that the lipophilic antioxidant compounds of bitter gourd fruit might possess stronger antioxidant power than its counterpart.

  6. Semiautomated method for cation-exchange capacity determination of reservoir rocks

    SciTech Connect

    Gall, B.L.; Raible, C.J.; Volk, L.J.

    1983-04-01

    The presence of significant amounts of clay in tight-gas sand formations makes the determination of cation exchange capacities (CEC) important for electric-log, self potential (SP), and gamma ray log interpretation. In the past, CEC measurements have been difficult and time-consuming to obtain. However, an automated method that avoids many difficulties of other techniques while determining the CEC's of many samples at one time has been described by Worthington. This work is a modification of the work done by Worthington. Easily assembled commercial equipment instead of specially built equipment is used to agitate rock samples contained in dialysis membrane bags during ion exchange with barium acetate solution and during washing of the samples to remove excess barium ions. Barium acetate is used as the source of barium ions instead of barium chloride, which is used in Worthington's procedure, to avoid corrosion of the stainless steel equipment. The amount of barium ions on the rock samples is then determined by conductometric titration with magnesium sulfate. The titration procedure is not automated. In addition, the use of the barium ion method was extended to samples with CEC values an order of magnitude lower than those determined by Worthington.

  7. Solvothermal and electrochemical synthetic method of HKUST-1 and its methane storage capacity

    NASA Astrophysics Data System (ADS)

    Wahyu Lestari, Witri; Adreane, Marisa; Purnawan, Candra; Fansuri, Hamzah; Widiastuti, Nurul; Budi Rahardjo, Sentot

    2016-02-01

    A comparison synthetic strategy of Metal-Organic Frameworks, namely, Hongkong University of Techhnology-1 {HKUST-1[Cu3(BTC)]2} (BTC = 1,3,5-benzene-tri-carboxylate) through solvothermal and electrochemical method in ethanol:water (1:1) has been conducted. The obtained material was analyzed using powder X-ray diffraction, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), Thermo-Gravimetric Analysis (TGA) and Surface Area Analysis (SAA). While the voltage in the electrochemical method are varied, ranging from 12 to 15 Volt. The results show that at 15 V the texture of the material has the best degree of crystallinity and comparable with solvothermal product. This indicated from XRD data and supported by the SEM image to view the morphology. The thermal stability of the synthesized compounds is up to 320 °C. The shape of the nitrogen sorption isotherm of the compound corresponds to type I of the IUPAC adsorption isotherm classification for microporous materials with BET surface area of 629.2 and 324.3 m2/g (for solvothermal and electrochemical product respectively) and promising for gas storage application. Herein, the methane storage capacities of these compounds are also tested.

  8. Poultry water holding capacity measurements using infrared spectroscopies correlated to traditional methods

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Water holding capacity (WHC) in chicken meat is directly correlated with the quality of the meat. Lower water holding capacity is linked with decreased sensory qualities and therefore lower consumer satisfaction. Additionally, measurement of WHC is subject to wide variations which can depend on many...

  9. LASERS: Ultrashort-pulse erbium-doped fibre laser using a saturable absorber based on single-wall carbon nanotubes synthesised by the arc-discharge method

    NASA Astrophysics Data System (ADS)

    Tausenev, A. V.; Obraztsova, E. D.; Lobach, A. S.; Konov, V. I.; Konyashchenko, A. V.; Kryukov, P. G.; Dianov, E. M.

    2007-09-01

    An erbium-doped fibre laser operating in self-mode-locked regime achieved with the help of a saturable absorber based on single-wall carbon nanotubes synthesised by the arc-discharge method is fabricated and studied. Due to the development of an original method for preparing samples, films of the optical quality containing individual single-wall carbon nanotubes were synthesised. The study of the dependence of resonance absorption at a wavelength of 1.5 μm on the laser radiation intensity transmitted through a film showed that these films have nonlinear transmission and can be used in fibre lasers as saturable absorbers to provide self-mode locking. Stable transform-limited pulses having the shape of optical solitons were generated at a wavelength of 1557.5 nm in the laser with a ring resonator. The pulse duration was 1.13 ps at a pulse repetition rate of 20.5 MHz. The continuous output power achieved 1.1 mW upon pumping by a 25-mW laser diode at 980 nm.

  10. Methodology and Method and Apparatus for Signaling With Capacity Optimized Constellations

    NASA Technical Reports Server (NTRS)

    Barsoum, Maged F. (Inventor); Jones, Christopher R. (Inventor)

    2014-01-01

    Communication systems are described that use geometrically shaped constellations that have increased capacity compared to conventional constellations operating within a similar SNR band. In several embodiments, the geometrically shaped is optimized based upon a capacity measure such as parallel decoding capacity or joint capacity. In many embodiments, a capacity optimized geometrically shaped constellation can be used to replace a conventional constellation as part of a firmware upgrade to transmitters and receivers within a communication system. In a number of embodiments, the geometrically shaped constellation is optimized for an Additive White Gaussian Noise channel or a fading channel. In numerous embodiments, the communication uses adaptive rate encoding and the location of points within the geometrically shaped constellation changes as the code rate changes.

  11. [Measuring water ecological carrying capacity with the ecosystem-service-based ecological footprint (ESEF) method: Theory, models and application].

    PubMed

    Jiao, Wen-jun; Min, Qing-wen; Li, Wen-hua; Fuller, Anthony M

    2015-04-01

    Integrated watershed management based on aquatic ecosystems has been increasingly acknowledged. Such a change in the philosophy of water environment management requires recognizing the carrying capacity of aquatic ecosystems for human society from a more general perspective. The concept of the water ecological carrying capacity is therefore put forward, which considers both water resources and water environment, connects socio-economic development to aquatic ecosystems and provides strong support for integrated watershed management. In this paper, the authors proposed an ESEF-based measure of water ecological carrying capacity and constructed ESEF-based models of water ecological footprint and capacity, aiming to evaluate water ecological carrying capacity with footprint methods. A regional model of Taihu Lake Basin was constructed and applied to evaluate the water ecological carrying capacity in Changzhou City which located in the upper reaches of the basin. Results showed that human demand for water ecosystem services in this city had exceeded the supply capacity of local aquatic ecosystems and the significant gap between demand and supply had jeopardized the sustainability of local aquatic ecosystems. Considering aqua-product provision, water supply and pollutant absorption in an integrated way, the scale of population and economy aquatic ecosystems in Changzhou could bear only 54% of the current status.

  12. Method for determining thermal conductivity and thermal capacity per unit volume of earth in situ

    DOEpatents

    Poppendiek, Heinz F.

    1982-01-01

    A method for determining the thermal conductivity of the earth in situ is based upon a cylindrical probe (10) having a thermopile (16) for measuring the temperature gradient between sets of thermocouple junctions (18 and 20) of the probe after it has been positioned in a borehole and has reached thermal equilibrium with its surroundings, and having means (14) for heating one set of thermocouple junctions (20) of the probe at a constant rate while the temperature gradient of the probe is recorded as a rise in temperature over several hours (more than about 3 hours). A fluid annulus thermally couples the probe to the surrounding earth. The recorded temperature curves are related to the earth's thermal conductivity, k.sub..infin., and to the thermal capacity per unit volume, (.gamma.c.sub.p).sub..infin., by comparison with calculated curves using estimates of k.sub..infin. and (.gamma.c.sub.p).sub..infin. in an equation which relates these parameters to a rise in the earth's temperature for a known and constant heating rate.

  13. Determining the cation exchange capacity of montmorillonite by simultaneous thermal analysis method

    NASA Astrophysics Data System (ADS)

    Boeva, N. M.; Bocharnikova, Yu. I.; Belousov, P. E.; Zhigarev, V. V.

    2016-08-01

    A way of determining the cation exchange capacity of montmorillonite by simultaneous thermal analysis is developed using as an example the bentonites of the 10th Khutor deposit (Republic of Khakassia) and the Vodopadnyi area (Sakhalin Island). A correlation is established between the cation exchange capacity of smectite and its weight loss upon heating in the range of dehydration; the enthalpy of dehydration of montmorillonite; and the weight loss and the enthalpy of thermal dissociation of ethylene glycol contained in the interlayer space of the mineral's crystal structure. These data open up new possibilities for determining the cation exchange capacity of montmorillonite, the most important technological indicator of the natural clay nanomineral.

  14. Quantification of oil binding capacity of structuring fats: A novel method and its application.

    PubMed

    Omonov, Tolibjon S; Bouzidi, Laziz; Narine, Suresh S

    2010-09-01

    A robust, well-defined and reproducible method to accurately measure the oil binding capacity (OBC) of structuring fats was developed. The method was validated using two oil/fat model systems, i.e., fully hydrogenated canola oil (FHCO) in canola oil (CO) (FHCO/CO) and fully hydrogenated soybean oil (FHSO) in CO (FHSO/CO). The mixtures were crystallized from the melt down to three different temperatures (15, 25 and 35 degrees C) at constant rates of cooling and the OBC was measured after different periods of storage time. The critical concentration of hard fat at which the solid fat network is stable and effectively binds oil has been also measured for mixtures crystallized at temperatures close to room temperature, i.e., 25 degrees C. Crystal structure, melting behavior, microstructure, and solid fat content of these binary systems have been investigated in relation to the OBC of the solid fat network using X-ray diffraction (XRD), differential scanning calorimetry (DSC), polarized light microscopy (PLM), and wide-line pulsed nuclear magnetic resonance (pNMR) techniques. The two model systems exhibited similar trends in OBC over time, a behavior attributed to their similar TAG composition and polymorphism. However, relatively smaller OBC values were achieved by the CO/FHSO compared to CO/FHCO samples, largely due to differences in their solid network structure. Four successive decreasing linear segments, identifying successive mechanisms of oil migration/binding, were observed in the experimental OBC versus fat weight fraction curves. The critical concentration of hard fat, at which the solid fat network is effective in binding oil, was also determined and found to be approximately 6wt% for both systems.

  15. Preparation of high absorbance and high emittance coatings on 6061 aluminum alloy with a pre-deposition method by plasma electrolytic oxidation

    NASA Astrophysics Data System (ADS)

    Ma, Delin; Lu, Chunhua; Fang, Zhenggang; Yan, Weigang; Wei, Ling; Ni, Yaru; Xu, Zhongzi

    2016-12-01

    With Sm0.5Sr0.5CoO3 microparticles as the raw material, high solar absorptive and high infrared emissive coatings were successfully prepared on 6061 aluminum alloys using a new method including firstly microparticle pre-deposition by gravity and then plasma electrolytic oxidation (PEO) technique. All four coatings were characterized by XRD, SEM and EDS respectively. The solar absorbance (αs) and infrared emittance (εT) were also investigated. The results showed that all four coatings were black and rough; the Na and P elements from the electrolyte were incorporated into the coatings; amorphous compounds containing Na and P also existed in the coatings. All four coatings had a complex multiphase composition mainly consisting of Sm2O3, SrAl4O7, AlPO4 and CoAl2O4 phases, which might derive from drastic reactions under high temperature and high pressure during the PEO process. The surface morphology and the relative content of main crystal phases changed with increasing current density or time. The cross-section of the coatings exhibited a layer structure. As current density or time increased, the αs decreased but εT increased. All four coatings showed a high solar absorbance value ≥ 0.85 and high infrared emittance value ≥ 0.90, which indicated that the coatings might have promising applications in solar and infrared heating for aluminum alloys.

  16. Effect of gamma radiation on antioxidant capacity of green tea, yerba mate, and chamomile tea as evaluated by different methods

    NASA Astrophysics Data System (ADS)

    Gerolis, Luanai Grazieli Luquini; Lameiras, Fernando Soares; Krambrock, Klaus; Neves, Maria Jose.

    2017-01-01

    Tea is a traditional plant extract with important cultural ties. It is the most widely consumed beverage in the world. Tea consumption has some health benefits including antioxidant stimulus. Gamma radiation is currently used to control of postharvest pathogens on tea herb. However, free radicals can be generated, which consumes antioxidant molecules. A positive relation was found between radiation doses used and free radicals generation in green tea (Camellia sinensis), yerba mate (Ilex paraguariensis), and chamomile tea (Matricaria recutita). Total antioxidant capacity (TAC) of aqueous and methanol extracts of these herbs was determined by various methods to compare the effect of irradiation of herb on antioxidant capacity of the extracts. TAC was evaluated by measuring: total phenols (decreased with irradiation in mate and green teas), total flavonoids (stable in aqueous extracts and decreased with irradiation in methanol extract of mate and chamomile), Trolox equivalent or ABTS (unchanged under irradiation), DPPH* scavenging capacity (stable on aqueous extract but diminished in methanol extract after irradiation), β carotene/acid linoleic ability (stable with the exception of chamomile tea that increased after irradiation) and, capacity to chelate ferrous ions (unchanged with irradiation). In conclusion, gamma irradiation reduced the capacity of some antioxidants but preserved the capacity of others. This study showed that one isolated test does not suffice to perform this evaluation reliably, which is a reflection of the diversity and complexity of the effects of irradiation on antioxidant molecules present in different samples.

  17. Recovery efficiencies of anthrax spores and ricin from nonporous or nonabsorbent and porous or absorbent surfaces by a variety of sampling methods*.

    PubMed

    Frawley, Dody A; Samaan, Marian N; Bull, Robert L; Robertson, James M; Mateczun, Alfred J; Turnbull, Peter C B

    2008-09-01

    The 2001 anthrax letter cases brought into focus the need to establish the most effective environmental sampling procedures. Results are presented from two studies aimed at establishing the best procedures for everyday surfaces likely to be contaminated after the release of environmentally stable bioaggressive agents, as exemplified by anthrax spores and ricin. With anthrax spores, contact plates, with mean retrieval rates of 28-54%, performed better than other methods by a wide margin for flat nonporous, nonabsorbent surfaces. They also proved best on flat porous, absorbent materials, although recoveries were low (<7%). For both agents, dry devices (swabs, wipes, Trace Evidence Collection Filters) had universally poor retrieval efficiencies with no significant differences between them. Among moistened devices (wipes, swabs, and Sample Collection and Recovery Devices), wipes were generally best, albeit with considerable cross-over among individual readings (highest mean recoveries for anthrax spores and ricin 5.5% and 2.5%, respectively, off plastic).

  18. A modal-based reduction method for sound absorbing porous materials in poro-acoustic finite element models.

    PubMed

    Rumpler, Romain; Deü, Jean-François; Göransson, Peter

    2012-11-01

    Structural-acoustic finite element models including three-dimensional (3D) modeling of porous media are generally computationally costly. While being the most commonly used predictive tool in the context of noise reduction applications, efficient solution strategies are required. In this work, an original modal reduction technique, involving real-valued modes computed from a classical eigenvalue solver is proposed to reduce the size of the problem associated with the porous media. In the form presented in this contribution, the method is suited for homogeneous porous layers. It is validated on a 1D poro-acoustic academic problem and tested for its performance on a 3D application, using a subdomain decomposition strategy. The performance of the proposed method is estimated in terms of degrees of freedom downsizing, computational time enhancement, as well as matrix sparsity of the reduced system.

  19. An Improvement to a Method for Measuring the Absorption Coefficient of Atmospheric Dust and other Strongly Absorbing Powders

    DTIC Science & Technology

    1975-07-01

    coefficient. Diffuse reflectance spectroscopy, and in particular the Kubelka - Munk (K-M) theory, can provide such information. A convenient method for...34Uber Den Streukoeffizienten Der Kubelka - Munk -Theorie," Z. Naturforsch, 19a, 28. 3. J. B. Gillespie, J. D. Lindberg and L. S. Laude, 1975 " Kubelka ... Munk Optical Coefficients for a Barium Sulfate White Reflectance Standard," Appl. Opt. 14, 807. 4. F. Grum and G. W. Lucky, 1968, "Optical Sphere

  20. Composition for absorbing hydrogen

    DOEpatents

    Heung, Leung K.; Wicks, George G.; Enz, Glenn L.

    1995-01-01

    A hydrogen absorbing composition. The composition comprises a porous glass matrix, made by a sol-gel process, having a hydrogen-absorbing material dispersed throughout the matrix. A sol, made from tetraethyl orthosilicate, is mixed with a hydrogen-absorbing material and solidified to form a porous glass matrix with the hydrogen-absorbing material dispersed uniformly throughout the matrix. The glass matrix has pores large enough to allow gases having hydrogen to pass through the matrix, yet small enough to hold the particles dispersed within the matrix so that the hydrogen-absorbing particles are not released during repeated hydrogen absorption/desorption cycles.

  1. Composition for absorbing hydrogen

    DOEpatents

    Heung, L.K.; Wicks, G.G.; Enz, G.L.

    1995-05-02

    A hydrogen absorbing composition is described. The composition comprises a porous glass matrix, made by a sol-gel process, having a hydrogen-absorbing material dispersed throughout the matrix. A sol, made from tetraethyl orthosilicate, is mixed with a hydrogen-absorbing material and solidified to form a porous glass matrix with the hydrogen-absorbing material dispersed uniformly throughout the matrix. The glass matrix has pores large enough to allow gases having hydrogen to pass through the matrix, yet small enough to hold the particles dispersed within the matrix so that the hydrogen-absorbing particles are not released during repeated hydrogen absorption/desorption cycles.

  2. A new method to retrieve spectral absorption coefficient of highly-scattering and weakly-absorbing materials

    NASA Astrophysics Data System (ADS)

    Dombrovsky, Leonid A.

    2016-03-01

    A significant uncertainty in the absorption coefficient of highly scattering dispersed materials is typical in the spectral ranges of very weak absorption. The traditional way to identify the main absorption and scattering characteristics of semi-transparent materials is based on spectral measurements of normal-hemispherical reflectance and transmittance for the material sample. Unfortunately this way cannot be used in the case of in vivo measurements of optical properties of biological tissues. A method suggested in the present paper is based on thermal response to the periodic radiative heating of the open surface of a semi-transparent material. It is shown that the period of a variation of the surface temperature is sensitive to the value of an average absorption coefficient in the surface layer. As a result, the monochromatic external irradiation combined with the surface temperature measurements can be used to retrieve the spectral values of absorption coefficient. Possible application of this method to porous semi-transparent ceramics is considered. An example problem is also solved to illustrate the applicability of this method to human skin. The approach suggested enables one to estimate an average absorption coefficient of human skin of a patient just before the thermal processing.

  3. Quantitative analysis of chlorpheniramine maleate and phenylephrine hydrochloride in nasal drops by differential-derivative spectrophotometric, zero-crossing first derivative UV spectrophotometric and absorbance ratio methods.

    PubMed

    Erk, N

    2000-11-01

    Three simple, rapid and accurate methods are described for the simultaneous determination of chlorpheniramine maleate and phenylephrine hydrochloride in two component mixtures. The first method comprised of measurement of difference absorptivities derivatized in first order of a nasal drops in 0.1 N NaOH relative to that of an equimolar solution in methanol at wavelengths of 271.6 and 250.2 nm, respectively. The second method, zero-crossing derivative spectrophotometry, is based on recording the first derivative curves and determining each component using the zero-crossing technique. Using first derivative spectrophotometry, the amplitudes in the first derivative spectra at 246.5 and 238.6 nm were selected to simultaneously determine chlorpheniramine maleate and phenylephrine hydrochloride in the mixture. The presence of identical zero-crossing points for pure drugs and nasal drop solutions established the non-interference of the excipients in the absorption at these wavelengths. Absorbance ratio method was also developed for a comparison method. The proposed procedures were successfully applied to the determination of chlorpheniramine maleate and phenylephrine hydrochloride in nasal drops, with a high percentage of recovery, good accuracy and precision.

  4. A Framework for Understanding Community Colleges' Organizational Capacity for Data Use: A Convergent Parallel Mixed Methods Study

    ERIC Educational Resources Information Center

    Kerrigan, Monica Reid

    2014-01-01

    This convergent parallel design mixed methods case study of four community colleges explores the relationship between organizational capacity and implementation of data-driven decision making (DDDM). The article also illustrates purposive sampling using replication logic for cross-case analysis and the strengths and weaknesses of quantitizing…

  5. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  6. Alternative methods to fabricate and evaluate copper zinc tin sulfide based absorber layers on transparent conducting electrodes

    NASA Astrophysics Data System (ADS)

    Sarswat, Prashant Kumar

    This study is focused on fabrication and characterization of Cu 2ZnSnS4 (CZTS) films on transparent conducting substrate. CZTS films were synthesized using solution based methods. A specially designed sequential and single stage electrochemical method as well as spin coating method was used to grow layers of precursors. Deposition of constituent metallic layers was carried out on SnO2/F (Fluorinated tin oxide or FTO) coated glass substrates. The electrodeposited/spin coated layers were annealed in a sulfur environment to obtain CZTS. Structural, morphological and optical characterization experiments were performed using several techniques including x-ray diffraction, Raman and UV-visible spectroscopy, scanning electron microscopy, and atomic force microscopy. All characterization experiments indicated the films are single phase with a measured direct band gap of ˜1.5 eV. Photocurrent response of CZTS film grown on FTO substrate was measured using alternating front illumination and rear illumination in a Eu 3+/Eu2+ solution environment. The photoelectrochemical response exhibited during rear illumination is comparable to that obtained for front illumination. The promising photocurrent data for CZTS films suggest these films have potential application in a variety of photovoltaic devices. A comparative study revealed that photoelectrochemical response exhibited by the films grown on molybdenum substrate is greater than that obtained for film grown on FTO substrate. A modified form of the Gartner model to explain J-V characteristics for CZTS-electrolyte solution has been proposed. Fundamental information such as energy band gap-temperature relationship and temperature dependent study of Raman 'A' mode for CZTS thin films were also investigated in this research.

  7. Teaching Methods for Science and Technology: Visualized Teaching and Cultivating the Capacity for Scientific Abstraction

    ERIC Educational Resources Information Center

    Chinese Education, 1973

    1973-01-01

    Improvement of the student's ability to analyze and solve problems by effectively relating the use of visual aids to the cultivation of capacity for scientific abstraction is discussed. These basic theory courses are based on the dialectical materialistic theory of knowledge and Mao's instruction on the unity of theory and reality.'' (SM)

  8. Load controller and method to enhance effective capacity of a photovoltaic power supply using a dynamically determined expected peak loading

    DOEpatents

    Perez, Richard

    2005-05-03

    A load controller and method are provided for maximizing effective capacity of a non-controllable, renewable power supply coupled to a variable electrical load also coupled to a conventional power grid. Effective capacity is enhanced by monitoring power output of the renewable supply and loading, and comparing the loading against the power output and a load adjustment threshold determined from an expected peak loading. A value for a load adjustment parameter is calculated by subtracting the renewable supply output and the load adjustment parameter from the current load. This value is then employed to control the variable load in an amount proportional to the value of the load control parameter when the parameter is within a predefined range. By so controlling the load, the effective capacity of the non-controllable, renewable power supply is increased without any attempt at operational feedback control of the renewable supply.

  9. Analysis of methods to determine storage capacity of, and sedimentation in, Loch Lomond Reservoir, Santa Cruz County, California, 2009

    USGS Publications Warehouse

    McPherson, Kelly R.; Freeman, Lawrence A.; Flint, Lorraine E.

    2011-01-01

    In 2009, the U.S. Geological Survey, in cooperation with the City of Santa Cruz, conducted bathymetric and topographic surveys to determine the water storage capacity of, and the loss of capacity owing to sedimentation in, Loch Lomond Reservoir in Santa Cruz County, California. The topographic survey was done as a supplement to the bathymetric survey to obtain information about temporal changes in the upper reach of the reservoir where the water is shallow or the reservoir may be dry, as well as to obtain information about shoreline changes throughout the reservoir. Results of a combined bathymetric and topographic survey using a new, state-of-the-art method with advanced instrument technology indicate that the maximum storage capacity of the reservoir at the spillway altitude of 577.5 feet (National Geodetic Vertical Datum of 1929) was 8,646 ±85 acre-feet in March 2009, with a confidence level of 99 percent. This new method is a combination of bathymetric scanning using multibeam-sidescan sonar, and topographic surveying using laser scanning (LiDAR), which produced a 1.64-foot-resolution grid with altitudes to 0.3-foot resolution and an estimate of total water storage capacity at a 99-percent confidence level. Because the volume of sedimentation in a reservoir is considered equal to the decrease in water-storage capacity, sedimentation in Loch Lomond Reservoir was determined by estimating the change in storage capacity by comparing the reservoir bed surface defined in the March 2009 survey with a revision of the reservoir bed surface determined in a previous investigation in November 1998. This revised reservoir-bed surface was defined by combining altitude data from the 1998 survey with new data collected during the current (2009) investigation to fill gaps in the 1998 data. Limitations that determine the accuracy of estimates of changes in the volume of sedimentation from that estimated in each of the four previous investigations (1960, 1971, 1982, and 1998

  10. Extremely efficient and recyclable absorbents for oily pollutants enabled by ultrathin-layered functionalization.

    PubMed

    Wang, Qianqian; Wang, Hanghua; Xiong, Sen; Chen, Rizhi; Wang, Yong

    2014-11-12

    Oils and organic solvents that leak into water bodies must be promptly removed to avoid ecological disasters, for example, by selective absorption using oleophilic absorbents. However, it remains a challenge for the low-cost synthesis of efficient and recyclable absorbents for oily pollutants. By surface functionalization to inexpensive polyurethane (PU) foams, we synthesize oil absorbents exhibiting the highest absorption capacity and the best recyclability among all polymeric absorbents. The synthesis is enabled by atomic layer deposition of ∼5 nm-thick Al2O3 transition layer onto the skeleton surface of PU foams, followed by coupling a single-molecule layer of silanes to the Al2O3 layer. The sub-10 nm functionalization layer provides the PU foam an outstanding water-repelling and oil-absorbing functionality without compromising its high porosity and elasticity. The functionalized foam is able to quickly absorb oily pollutants spread on water surfaces or precipitated in water with a capacity more than 100 times its own weight. This ultrathin-layer-functionalization method is also applicable to renewable porous biomaterials, providing a sustainable solution for oil spills. Moreover, we propose devices than can continuously operate to efficiently collect oil spills from water surfaces based on the functionalized PU foam developed in this work.

  11. An innovative method for water resources carrying capacity research--Metabolic theory of regional water resources.

    PubMed

    Ren, Chongfeng; Guo, Ping; Li, Mo; Li, Ruihuan

    2016-02-01

    The shortage and uneven spatial and temporal distribution of water resources has seriously restricted the sustainable development of regional society and economy. In this study, a metabolic theory for regional water resources was proposed by introducing the biological metabolism concept into the carrying capacity of regional water resources. In the organic metabolic process of water resources, the socio-economic system consumes water resources, while products, services and pollutants, etc. are output. Furthermore, an evaluation index system which takes into the characteristics of the regional water resources, the socio-economic system and the sustainable development principle was established based on the proposed theory. The theory was then applied to a case study to prove its availability. Further, suggestions aiming at improving the regional water carrying capacity were given on the basis of a comprehensive analysis of the current water resources situation.

  12. Effect of drying method on volatile compounds, phenolic profile and antioxidant capacity of guava powders.

    PubMed

    Nunes, Juliana C; Lago, Mabel G; Castelo-Branco, Vanessa N; Oliveira, Felipe R; Torres, Alexandre Guedes; Perrone, Daniel; Monteiro, Mariana

    2016-04-15

    We studied the chemical composition of oven and freeze dried guava powders for future use as antioxidant-rich flavour enhancers. Among thirty-one volatiles in guava powders, terpenes were predominant, even after both drying processes. In contrast, esters and aldehydes, volatiles characteristic of fresh guava fruit, appeared to have been decreased by drying. Insoluble phenolics were predominant and among the sixteen compounds identified, quercetin-3-O-rutinoside and naringenin corresponded to 56% of total phenolics. Drying processes decreased total phenolics contents by up to 44%. Oven drying promoted the release of insoluble flavonoids, generating mainly quercetin. Antioxidant capacity also decreased due to both drying processes, but guava powders still presented similar antioxidant capacity in comparison to other tropical fruit powders. Our results suggest that oven drying is a viable option for the production of a functional ingredient that would improve the phenolic content of cereal foods while adding desirable guava flavour.

  13. Methodology and method and apparatus for signaling with capacity optimized constellations

    NASA Technical Reports Server (NTRS)

    Barsoum, Maged F. (Inventor); Jones, Christopher R. (Inventor)

    2011-01-01

    Communication systems having transmitter, includes a coder configured to receive user bits and output encoded bits at an expanded output encoded bit rate, a mapper configured to map encoded bits to symbols in a symbol constellation, a modulator configured to generate a signal for transmission via the communication channel using symbols generated by the mapper. In addition, the receiver includes a demodulator configured to demodulate the received signal via the communication channel, a demapper configured to estimate likelihoods from the demodulated signal, a decoder that is configured to estimate decoded bits from the likelihoods generated by the demapper. Furthermore, the symbol constellation is a capacity optimized geometrically spaced symbol constellation that provides a given capacity at a reduced signal-to-noise ratio compared to a signal constellation that maximizes d.sub.min.

  14. A method for determination of heat storage capacity of the mold materials using a differential thermal analysis

    NASA Astrophysics Data System (ADS)

    Ol'khovik, E.

    2016-04-01

    The article proposes a method for determining of the heat storage capacity of the mould materials. Modern materials for mouldsare made using a variety of technologies, and the manufacturers of binders and additives ensure thermal properties of certain materials only when using a certain recipe. In practice, for management of the casting solidification process (creation of the volume or directed mode) it is favorable to apply various technological methods, including modification of one of the important properties of the casting mould, which is heat storage capacity. A rather simple technique based on the application of the differential thermal analysis was developed for its experimental definition. The obtained data showed a possibility of industrial application of the method.

  15. Externally tuned vibration absorber

    DOEpatents

    Vincent, Ronald J.

    1987-09-22

    A vibration absorber unit or units are mounted on the exterior housing of a hydraulic drive system of the type that is powered from a pressure wave generated, e.g., by a Stirling engine. The hydraulic drive system employs a piston which is hydraulically driven to oscillate in a direction perpendicular to the axis of the hydraulic drive system. The vibration absorbers each include a spring or other resilient member having one side affixed to the housing and another side to which an absorber mass is affixed. In a preferred embodiment, a pair of vibration absorbers is employed, each absorber being formed of a pair of leaf spring assemblies, between which the absorber mass is suspended.

  16. Shock absorber control system

    SciTech Connect

    Nakano, Y.; Ohira, M.; Ushida, M.; Miyagawa, T.; Shimodaira, T.

    1987-01-13

    A shock absorber control system is described for controlling a dampening force of a shock absorber of a vehicle comprising: setting means for setting a desired dampening force changeable within a predetermined range; drive means for driving the shock absorber to change the dampening force of the shock absorber linearly; control means for controlling the drive means in accordance with the desired dampening force when the setting of the desired dampening force has been changed; detecting means for detecting an actual dampening force of the shock absorber; and correcting means for correcting the dampening force of the shock absorber by controlling the drive means in accordance with a difference between the desired dampening force and the detected actual dampening force.

  17. CPCs with segmented absorbers

    SciTech Connect

    Keita, M.; Robertson, H.S. )

    1991-01-01

    One of the most promising means of improving the performance of solar thermal collectors is to reduce the energy lost by the hot absorber. One way to do this, not currently part of the technology, is to recognize that since the absorber is usually not irradiated uniformly, it is therefore possible to construct an absorber of thermally isolated segments, circulate the fluid in sequence from low to high irradiance segments, and reduce loss by improving effective concentration. This procedure works even for ideal concentrators, without violating Winston's theorem. Two equivalent CPC collectors with single and segmented absorber were constructed and compared under actual operating conditions. The results showed that the daily thermal efficiency of the collector with segmented absorber is higher (about 13%) than that of the collector with nonsegmented absorber.

  18. Depression storage capacities of different ideal pavements as quantified by a terrestrial laser scanning-based method.

    PubMed

    Nehls, T; Menzel, M; Wessolek, G

    2015-01-01

    Rainfall partition on paved urban surfaces is governed to a great extent by depression storage. This is especially the case for small rainfall events, which are often ignored in urban hydrology. If storage, infiltration and evaporation (important for urban heat island mitigation), rather than storm water run-off, are of interest, high-resolution simulations with exact values for depression storage capacities are required. Terrestrial laser scanners deliver fast, high-resolution surveys of pavement surface morphology. The depression storage capacity can be quantified from 3D points by generating digital elevation models and applying cut-and-fill algorithms in a geographic information system. The method was validated using a test model. It was possible to quantify depressions with a depth of at least 1.4 × 10(-3) m and a surface of at least 15 × 10(-6) m(2) with an uncertainty below 30%. Applying this method, the depression storage capacities for 11 ideal, typical pavement designs were found to vary from 0.07 to 1.4 mm. Realistic urban pavements must also be surveyed, as cracks and puddles from their use history can have a major impact on the depression storage capacities and thus on infiltration, evaporation and, finally, the annual run-off.

  19. Methods for determining the CO2 sorption capacity of coal: Experimental and theoretical high pressure isotherms

    NASA Astrophysics Data System (ADS)

    Weishauptová, Zuzana; Přibyl, Oldřich

    2016-04-01

    One way to reduce CO2 emissions discharged into the atmosphere is by trapping it and storing it in suitable repositories, including coal-bearing strata. The history of coal mining in the Czech Republic is very rich but most of the mines have been closed down in recent years. However, the unmined coal seams are interesting for the purposes of CO2 storage, especially due the opportunities they offer for recovering coal-bed methane. Mine structures of this kind can be found in large parts of the Upper Silesian Basin, where the total storage capacity has been estimated at about 380 Mt CO2. This is an interesting storage potential. In order to identify a suitable high-capacity locality for CO2 storage within a coal seam, it is necessary to study not only the geological conditions within the seam, but also the textural properties of the coal, which control the mechanism and the extent of the storage. The major storage mechanism is by sorption processes that take place in the coal porous system (adsorption in micropores and on the surface of meso/macropores, and absorption in the macromolecular structure). The CO2 sorption capacity is generally indirectly determined in a laboratory by measuring the amount of carbon dioxide captured in a coal sample at a pressure and temperature corresponding to the in situ conditions, using high pressure sorption techniques. The low pressure sorption technique can be used, by setting the partial volumes of CO2 according to its binding and storage mode. The sorption capacity is determined by extrapolation to the saturation pressure as the sum of the individual partially sorbed volumes. The aim of the study was to determine the partial volumes of CO2 bound by different mechanisms in the individual parts of the porous system of the coal, and to compare the sum with the results obtained by the high pressure isotherm. The study was carried out with 3 samples from a borehole survey in the Czech part of the Upper Silesian Basin. A high pressure

  20. On the use of flux limiters in the discrete ordinates method for 3D radiation calculations in absorbing and scattering media

    NASA Astrophysics Data System (ADS)

    Godoy, William F.; DesJardin, Paul E.

    2010-05-01

    The application of flux limiters to the discrete ordinates method (DOM), SN, for radiative transfer calculations is discussed and analyzed for 3D enclosures for cases in which the intensities are strongly coupled to each other such as: radiative equilibrium and scattering media. A Newton-Krylov iterative method (GMRES) solves the final systems of linear equations along with a domain decomposition strategy for parallel computation using message passing libraries in a distributed memory system. Ray effects due to angular discretization and errors due to domain decomposition are minimized until small variations are introduced by these effects in order to focus on the influence of flux limiters on errors due to spatial discretization, known as numerical diffusion, smearing or false scattering. Results are presented for the DOM-integrated quantities such as heat flux, irradiation and emission. A variety of flux limiters are compared to "exact" solutions available in the literature, such as the integral solution of the RTE for pure absorbing-emitting media and isotropic scattering cases and a Monte Carlo solution for a forward scattering case. Additionally, a non-homogeneous 3D enclosure is included to extend the use of flux limiters to more practical cases. The overall balance of convergence, accuracy, speed and stability using flux limiters is shown to be superior compared to step schemes for any test case.

  1. Fully automated method for simultaneous determination of total cysteine, cysteinylglycine, glutathione and homocysteine in plasma by HPLC with UV absorbance detection.

    PubMed

    Głowacki, Rafał; Bald, Edward

    2009-10-15

    A fully automated HPLC method for the simultaneous determination of total thiols in plasma samples has been developed. The method involves reductive conversion of disulfides to their reduced counterparts with the use of tris(2-carboxyethyl)phosphine. After reduction the newly formed sulfhydryl groups are reacted with 2-chloro-1-methylquinolinium tetrafluoroborate to form 2-S-quinolinium derivatives followed by deproteinization by dialysis. The reaction products are separated by reversed-phase HPLC, detected and quantified by UV absorbance detection at 355nm. The recommended HPLC procedure enables measurement of four main plasma aminothiols cysteine, cysteinylglycine, glutathione, and homocysteine with low imprecision (mean relative standard deviations within calibration range, 3.47%, 5.34%, 4.25% and 3.26%, respectively) and good sensitivity. Accuracy, expressed as the mean measured amount as percentage of added amount, was within 97.5-103.0%, 98.3-102.5%, 96.3-99.5% and 97.1-99.1%, respectively. The lower limit of quantification for all thiols was 0.5microM. The whole unattended instrument acquisition time amounts 13min.

  2. Laboratory differential simulation design method of pressure absorbers for carbonization of phenolate solution by carbon dioxide in coal-tar processing

    SciTech Connect

    Linek, V.; Sinkule, J.; Moucha, T.; Rejl, J.F.

    2009-01-15

    A laboratory differential simulation method is used for the design of carbonization columns at coal-tar processing in which phenols are regenerated from phenolate solution by carbon dioxide absorption. The design method is based on integration of local absorption rates of carbon dioxide along the column. The local absorption rates into industrial phenolate mixture are measured in a laboratory model contactor for various compositions of the gas and liquid phases under the conditions that ensure the absorption rates in the laboratory absorber simulate the local rates in the industrial column. On the bases of the calculations, two-step carbonization columns were designed for 30000 t/year of the phenolate solution treatment by carbon dioxide. The absorption proceeds at higher pressure of 500 kPa and temperatures from 50 to 65 C, pure carbon dioxide is used and toluene is added. These conditions have the following favourable effects: (I) significant size reduction of the columns, (ii) it is possible to process more concentrated solutions without danger of silting the columns by crystallization of NaHCO{sub 3} on the packing. (iii) small amount of inert gas is released, (iv) lower alkalinity and better separability of the organic phase (phenols with toluene) from water phase (soda or bicarbonate solution) in separators.

  3. Self-mode-locking in erbium-doped fibre lasers with saturable polymer film absorbers containing single-wall carbon nanotubes synthesised by the arc discharge method

    NASA Astrophysics Data System (ADS)

    Tausenev, Anton V.; Obraztsova, Elena D.; Lobach, A. S.; Chernov, A. I.; Konov, Vitalii I.; Konyashchenko, Aleksandr V.; Kryukov, P. G.; Dianov, Evgenii M.

    2007-03-01

    We studied the ring and linear schemes of erbium-doped fibre lasers in which passive mode locking was achieved with the help of saturable absorbers made of high-optical quality films based on cellulose derivatives with dispersed single-wall carbon nanotubes. The films were prepared by the original method with the use of nanotubes synthesised by the arc discharge method. The films exhibit nonlinear absorption at a wavelength of 1.5 μm. Pulses in the form of optical solitons of duration 1.17 ps at a avelength of 1.56 μm were generated in the ring scheme of the erbium laser. The average output power was 1.1 mW at a pulse repetition rate of 20.5 MHz upon pumping by the 980-nm, 25-mW radiation from a laser diode. The pulse duration in the linear scheme was reduced to 466 fs for the output power up to 4 mW and a pulse repetition rate of 28.5 MHz. The specific feature of these lasers is a low pump threshold in the regime of generation of ultrashort pulses.

  4. Analysis of cylindrical wrap-around and doubly conformal patch antennas by way of the finite element-artificial absorber method

    NASA Technical Reports Server (NTRS)

    Volakis, J. L.; Kempel, L. C.; Sliva, R.; Wang, H. T. G.; Woo, A. G.

    1994-01-01

    The goal of this project was to develop analysis codes for computing the scattering and radiation of antennas on cylindrically and doubly conformal platforms. The finite element-boundary integral (FE-BI) method has been shown to accurately model the scattering and radiation of cavity-backed patch antennas. Unfortunately extension of this rigorous technique to coated or doubly curved platforms is cumbersome and inefficient. An alternative approximate approach is to employ an absorbing boundary condition (ABC) for terminating the finite element mesh thus avoiding use of a Green's function. A FE-ABC method is used to calculate the radar cross section (RCS) and radiation pattern of a cavity-backed patch antenna which is recessed within a metallic surface. It is shown that this approach is accurate for RCS and antenna pattern calculations with an ABC surface displaced as little as 0.3 lambda from the cavity aperture. These patch antennas may have a dielectric overlay which may also be modeled with this technique.

  5. H-M bearing capacity of a modified suction caisson determined by using load-/displacement-controlled methods

    NASA Astrophysics Data System (ADS)

    Zhang, Yu-kun; Gao, Yu-feng; Li, Da-yong; Mahfouz, Ali H.

    2016-12-01

    This paper presents a series of monotonically combined lateral loading tests to investigate the bearing capacity of the MSCs (modified suction caissons) in the saturated marine fine sand. The lateral loads were applied under load- and displacement-controlled methods at the loading eccentricity ratios of 1.5, 2.0 and 2.5. Results show that, in the displacement-controlled test, the deflection-softening behavior of load-deflection curves for MSCs was observed, and the softening degree of the load-deflection response increased with the increasing external skirt length or the decreasing loading eccentricity. It was also found that the rotation center of the MSC at failure determined by the load-controlled method is slightly lower than that by the displacement-controlled method. The calculated MSC capacity based on the rotation center position in serviceability limit state is relatively conservative, compared with the calculated capacity based on the rotation center position in the ultimate limit state. In the limit state, the passive earth pressures opposite the loading direction under load- and displacement-controlled methods decrease by 46% and 74% corresponding to peak values, respectively; however, the passive earth pressures in the loading direction at failure only decrease by approximately 3% and 7%, compared with their peak values.

  6. Oil and fat absorbing polymers

    NASA Technical Reports Server (NTRS)

    Marsh, H. E., Jr. (Inventor)

    1977-01-01

    A method is described for forming a solid network polymer having a minimal amount of crosslinking for use in absorbing fats and oils. The polymer remains solid at a swelling ratio in oil or fat of at least ten and provides an oil absorption greater than 900 weight percent.

  7. A review on modification methods to cellulose-based adsorbents to improve adsorption capacity.

    PubMed

    Hokkanen, Sanna; Bhatnagar, Amit; Sillanpää, Mika

    2016-03-15

    In recent decades, increased domestic, agricultural and industrial activities worldwide have led to the release of various pollutants, such as toxic heavy metals, inorganic anions, organics, micropollutants and nutrients into the aquatic environment. The removal of these wide varieties of pollutants for better quality of water for various activities is an emerging issue and a robust and eco-friendly treatment technology is needed for the purpose. It is well known that cellulosic materials can be obtained from various natural sources and can be employed as cheap adsorbents. Their adsorption capacities for heavy metal ions and other aquatic pollutants can be significantly affected upon chemical treatment. In general, chemically modified cellulose exhibits higher adsorption capacities for various aquatic pollutants than their unmodified forms. Numerous chemicals have been used for cellulose modifications which include mineral and organic acids, bases, oxidizing agent, organic compounds, etc. This paper reviews the current state of research on the use of cellulose, a naturally occurring material, its modified forms and their efficacy as adsorbents for the removal of various pollutants from waste streams. In this review, an extensive list of various cellulose-based adsorbents from literature has been compiled and their adsorption capacities under various conditions for the removal of various pollutants, as available in the literature, are presented along with highlighting and discussing the key advancement on the preparation of cellulose-based adsorbents. It is evident from the literature survey presented herein that modified cellulose-based adsorbents exhibit good potential for the removal of various aquatic pollutants. However, still there is a need to find out the practical utility of these adsorbents on a commercial scale, leading to the improvement of pollution control.

  8. A novel method for the determination of ascorbic acid and antioxidant capacity in Opuntia ficus indica using in vivo microdialysis.

    PubMed

    Pretti, L; Bazzu, G; Serra, P A; Nieddu, G

    2014-03-15

    A simple and rapid method was developed for in vivo simultaneous determination of ascorbic-acid and antioxidant capacity in microdialysates from cladodes of Opuntia ficus-indica (L.) Miller. The method is verified in water-stressed plants, as compared with a well-watered test controls. The microdialysis probe construction and insertion procedure was specifically developed to minimise the tissue trauma of the plant and to obtain optimal dialysis performance. Microdialysis was performed using a flow rate of 3 μL/min and the samples were analysed by HPLC coupled to electrochemical detection of ascorbic-acid and DPPH-determined antioxidant capacity. Our data indicate exponential decay of the concentrations of the analysed compounds as a function of microdialysis sampling time. Water-stressed Opuntia show decreased ascorbic acid levels and increased the others antioxidants.

  9. A rebreathing method for measuring lung volume, diffusing capacity and cardiac output in conscious small animals.

    PubMed

    Yilmaz, Cuneyt; Johnson, Robert L; Hsia, Connie C W

    2005-04-15

    We developed a multiple gas rebreathing technique for measuring lung diffusing capacity (DL(CO)), lung volume (V(L)) and cardiac output simultaneously in conscious spontaneously breathing small animals. Lung volume was measured from the dilution of methane (CH4) or sulfur hexafluoride (SF6) and verified independently by a helium washout technique. Cardiac output and DL(CO) were estimated from the uptake of acetylene and carbon monoxide, respectively. We tested guinea pigs at two levels of alveolar oxygen tension in order to estimate membrane diffusing capacity and pulmonary capillary blood volume by the Roughton-Forster technique. Results show that measured DL(CO) are consistent with reported values in anesthetized guinea pigs as well as with allometric comparison across species. Lung volume estimated from SF6 dilution agreed closely with that estimated independently from helium washout; however, lung volume estimated from CH4 dilution was systematically lower due to the addition of endogenously produced CH4 to the rebreathing system. We conclude that this technique can be used to measure resting lung function in conscious unsedated small animals.

  10. Assessing upper-extremity motion: An innovative method to quantify functional capacity in patients with chronic obstructive pulmonary disease

    PubMed Central

    Toosizadeh, Nima; Berry, Cristine; Bime, Christian; Najafi, Bijan; Kraft, Monica; Mohler, Jane

    2017-01-01

    Background Assessment of functional capacity is important in directing chronic obstructive pulmonary disease (COPD) care (e.g., rehabilitation and discharge readiness), and in predicting outcomes (e.g., exacerbation, hospitalization, and mortality). The 6-minute walk distance (6MWD) test for functional capacity assessment, may be time-consuming and burdensome. Objective The purpose of the current study was to evaluate an upper-extremity function (UEF) test for assessing functional capacity in older adults with COPD. Methods In this cross-sectional study, 49 older adults (≥55 years) with diagnosed COPD were recruited, and pulmonary function measures and 6MWD were obtained. Participants wore wireless sensors on forearm and upper-arm and performed rapid elbow flexion for 20 seconds (the UEF test). Slowness was assessed by measuring elbow speed, and acceleration and weakness (muscle strength) were assessed by measuring power of movement and elbow moment. Results Speed, power, and moment UEF parameters were independently associated with 6MWD, when controlling for age, gender, and body mass index (BMI) (r = 0.78, p < .001). Elbow moment showed significant Pearson correlations with all pulmonary function measures and maximal inspiratory/expiratory pressure measures (r = 0.35–0.69, p<0.02). Conclusions Results show promise of a quick upper-extremity measure of functional capacity in patients with COPD, and as an outcome measure in clinical COPD trials. PMID:28235045

  11. Multispectral metamaterial absorber.

    PubMed

    Grant, J; McCrindle, I J H; Li, C; Cumming, D R S

    2014-03-01

    We present the simulation, implementation, and measurement of a multispectral metamaterial absorber (MSMMA) and show that we can realize a simple absorber structure that operates in the mid-IR and terahertz (THz) bands. By embedding an IR metamaterial absorber layer into a standard THz metamaterial absorber stack, a narrowband resonance is induced at a wavelength of 4.3 μm. This resonance is in addition to the THz metamaterial absorption resonance at 109 μm (2.75 THz). We demonstrate the inherent scalability and versatility of our MSMMA by describing a second device whereby the MM-induced IR absorption peak frequency is tuned by varying the IR absorber geometry. Such a MSMMA could be coupled with a suitable sensor and formed into a focal plane array, enabling multispectral imaging.

  12. Traceable Quantitative Raman Microscopy and X-ray Fluorescence Analysis as Nondestructive Methods for the Characterization of Cu(In,Ga)Se2 Absorber Films.

    PubMed

    Zakel, Sabine; Pollakowski, Beatrix; Streeck, Cornelia; Wundrack, Stefan; Weber, Alfons; Brunken, Stefan; Mainz, Roland; Beckhoff, Burckhardt; Stosch, Rainer

    2016-02-01

    The traceability of measured quantities is an essential condition when linking process control parameters to guaranteed physical properties of a product. Using Raman spectroscopy as an analytical tool for monitoring the production of Cu(In1-xGax)Se2 thin-film solar cells, proper calibration with regard to chemical composition and lateral dimensions is a key prerequisite. This study shows how the multiple requirements of calibration in Raman microscopy might be addressed. The surface elemental composition as well as the integral elemental composition of the samples is traced back by reference-free X-ray fluorescence analysis. Reference Raman spectra are then generated for the relevant Cu(In1-xGax)Se2 related compounds. The lateral dimensions are calibrated with the help of a novel dimensional standard whose regular structures have been traced back to the International System of Units by metrological scanning force microscopy. On this basis, an approach for the quantitative determination of surface coverage values from lateral Raman mappings is developed together with a complete uncertainty budget. Raman and X-ray spectrometry have here been proven as complementary nondestructive methods combining surface sensitivity and in-depth information on elemental and species distribution for the reliable quality control of Cu(In1-xGax)Se2 absorbers and Cu(In1-xGax)3Se5 surface layer formation.

  13. Nonlinear dynamic vibration absorbers with a saturation

    NASA Astrophysics Data System (ADS)

    Febbo, M.; Machado, S. P.

    2013-03-01

    The behavior of a new type of nonlinear dynamic vibration absorber is studied. A distinctive characteristic of the proposed absorber is the impossibility to extend the system to infinity. The mathematical formulation is based on a finite extensibility nonlinear elastic potential to model the saturable nonlinearity. The absorber is attached to a single degree-of-freedom linear/nonlinear oscillator subjected to a periodic external excitation. In order to solve the equations of motion and to analyze the frequency-response curves, the method of averaging is used. The performance of the FENE absorber is evaluated considering a variation of the nonlinearity of the primary system, the damping and the linearized frequency of the absorber and the mass ratio. The numerical results show that the proposed absorber has a very good efficiency when the nonlinearity of the primary system increases. When compared with a cubic nonlinear absorber, for a large nonlinearity of the primary system, the FENE absorber shows a better effectiveness for the whole studied frequency range. A complete absence of quasi-periodic oscillations is also found for an appropriate selection of the parameters of the absorber. Finally, direct integrations of the equations of motion are performed to verify the accuracy of the proposed method.

  14. Systems, methods and computer readable media for estimating capacity loss in rechargeable electrochemical cells

    DOEpatents

    Gering, Kevin L.

    2013-06-18

    A system includes an electrochemical cell, monitoring hardware, and a computing system. The monitoring hardware periodically samples charge characteristics of the electrochemical cell. The computing system periodically determines cell information from the charge characteristics of the electrochemical cell. The computing system also periodically adds a first degradation characteristic from the cell information to a first sigmoid expression, periodically adds a second degradation characteristic from the cell information to a second sigmoid expression and combines the first sigmoid expression and the second sigmoid expression to develop or augment a multiple sigmoid model (MSM) of the electrochemical cell. The MSM may be used to estimate a capacity loss of the electrochemical cell at a desired point in time and analyze other characteristics of the electrochemical cell. The first and second degradation characteristics may be loss of active host sites and loss of free lithium for Li-ion cells.

  15. A versatile noninvasive method for adsorber quantification in batch and column chromatography based on the ionic capacity.

    PubMed

    Huuk, Thiemo C; Briskot, Till; Hahn, Tobias; Hubbuch, Jürgen

    2016-05-01

    Within the Quality by Design (QbD) framework proposed by the International Conference on Harmonisation (ICH), high-throughput process development (HTPD) and mechanistic modeling are of outstanding importance for future biopharmaceutical chromatography process development. In order to compare the data derived from different column scales or batch chromatographies, the amount of adsorber has to be quantified with the same noninvasive method. Similarly, an important requirement for the implementation of mechanistic modeling is the reliable determination of column characteristics such as the ionic capacity Λ for ion-exchange chromatography with the same method at all scales and formats. We developed a method to determine the ionic capacity in column and batch chromatography, based on the adsorption/desorption of the natural, uv-detectable amino acid histidine. In column chromatography, this method produces results comparable to those of classical acid-base titration. In contrast to acid-base titration, this method can be adapted to robotic batch chromatographic experiments. We are able to convert the adsorber volumes in batch chromatography to the equivalent volume of a compressed column. In a case study, we demonstrate that this method increases the quality of SMA parameters fitted to batch adsorption isotherms, and the capability to predict column breakthrough experiments. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:666-677, 2016.

  16. Two reading techniques of the filter paper press method for measuring meat water-holding capacity.

    PubMed

    Barge, M T; Destefanis, G; Toscano, G P; Brugiapaglia, A

    1991-01-01

    Two systems of measuring the areas obtained from the filter paper press method (Grau & Hamm) on meat (beef) were compared: by planimeter (method A) and by optical-electronic system (Video Image Analyzer; method B). Data obtained by three operators, measuring 15 samples twice, were utilized to estimate the 'precision' of the two methods. The general mean area of ring zone resulting from method A was 6·69 cm(2). Analysis of variance demonstrated a significant influence both for 'operator' factor and for the interaction operator-sample. Repeatability and reproducibility were 0·1706 and 0·2580, respectively. By method B the general mean area was 6·67 cm(2). The variance among operators was significant, but lower than in the method A, and there was no interaction. The repeatability and reproducibility were 0·03055 and 0·07234, respectively. It would appear, therefore, that the optical-electronic determination is more precise than the planimetric method.

  17. A gravimetric adaptation of the filter paper press method for the determination of water-binding capacity.

    PubMed

    Karmas, E; Turk, K

    1975-07-18

    A gravimetric adaptation of the filter paper press method for the determination of water-binding capacity in meat was developed and its sensitivity was compared to that of the conventional planimetric technique of the method. Both the gravimetric and planimetric techniques were applied to samples of cooked fish treated with various water binders. The mean results of the samples were grouped and compared using an analysis of variance. In all comparisons, the gravimetric data produced higher F-values than did the planimetric data for the same samples. This indicated greater senstivity for the gravimetric technique.

  18. Fabrication of nano-Fe3O4 3D structure on carbon fibers as a microwave absorber and EMI shielding composite by modified EPD method

    NASA Astrophysics Data System (ADS)

    Gholampoor, Mahdi; Movassagh-Alanagh, Farid; Salimkhani, Hamed

    2017-02-01

    Recently, electromagnetic interference (EMI) shielding materials have absorbed a lot of attention due to a growing need for application in the area of electronic and wireless devices. In this study, a carbon-based EMI shielding composite was fabricated by electrophoretic deposition of Fe3O4 nano-particles on carbon fibers (CFs) as a 3D structure incorporated with an epoxy resin. Co-precipitation method was employed to synthesize Fe3O4 nano-particles. This as-synthesized Fe3O4 nano-powder was then successfully deposited on CFs using a modified multi-step electrophoretic deposition (EPD) method. The results of structural studies showed that the Fe3O4 nano-particles (25 nm) were successfully and uniformly deposited on CFs. The measured magnetic properties of as-synthesized Fe3O4 nano-powder and nano-Fe3O4/CFs composite showed that the saturation magnetization of bare Fe3O4 was decreased from Ms = 72.3 emu/g to Ms = 33.1 emu/g for nano-Fe3O4/CFs composite and also corecivity of Fe3O4 was increased from Hc = 4.9 Oe to Hc = 168 Oe for composite. The results of microwave absorption tests revealed that the reflection loss (RL) of an epoxy-based nano-Fe3O4/CFs composite are significantly influenced by layer thickness. The maximum RL value of -10.21 dB at 10.12 GHz with an effective absorption bandwidth about 2 GHz was obtained for the sample with the thickness of 2 mm. It also exhibited an EMI shielding performance of -23 dB for whole the frequency range of 8.2-12.4 GHz.

  19. Internal absorber solar collector

    DOEpatents

    Sletten, Carlyle J.; Herskovitz, Sheldon B.; Holt, F. S.; Sletten, E. J.

    1981-01-01

    Thin solar collecting panels are described made from arrays of small rod collectors consisting of a refracting dielectric rod lens with an absorber imbedded within it and a reflecting mirror coated on the back side of the dielectric rod. Non-tracking collector panels on vertical walls or roof tops receive approximately 90% of solar radiation within an acceptance zone 60.degree. in elevation angle by 120.degree. or more in the azimuth sectors with a collector concentration ratio of approximately 3.0. Miniaturized construction of the circular dielectric rods with internal absorbers reduces the weight per area of glass, plastic and metal used in the collector panels. No external parts or insulation are needed as heat losses are low due to partial vacuum or low conductivity gas surrounding heated portions of the collector. The miniature internal absorbers are generally made of solid copper with black selective surface and the collected solar heat is extracted at the collector ends by thermal conductivity along the absorber rods. Heat is removed from end fittings by use of liquid circulants. Several alternate constructions are provided for simplifying collector panel fabrication and for preventing the thermal expansion and contraction of the heated absorber or circulant tubes from damaging vacuum seals. In a modified version of the internal absorber collector, oil with temperature dependent viscosity is pumped through a segmented absorber which is now composed of closely spaced insulated metal tubes. In this way the circulant is automatically diverted through heated portions of the absorber giving higher collector concentration ratios than theoretically possible for an unsegmented absorber.

  20. Lipid-absorbing Polymers

    NASA Technical Reports Server (NTRS)

    Marsh, H. E., Jr.; Wallace, C. J.

    1973-01-01

    The removal of bile acids and cholesterol by polymeric absorption is discussed in terms of micelle-polymer interaction. The results obtained with a polymer composed of 75 parts PEO and 25 parts PB plus curing ingredients show an absorption of 305 to 309%, based on original polymer weight. Particle size effects on absorption rate are analyzed. It is concluded that crosslinked polyethylene oxide polymers will absorb water, crosslinked polybutadiene polymers will absorb lipids; neither polymer will absorb appreciable amounts of lipids from micellar solutions of lipids in water.

  1. Electromagnetic power absorber

    NASA Technical Reports Server (NTRS)

    Iwasaki, R. S. (Inventor)

    1979-01-01

    A structure is presented with a surface portion of dielectric material which passes electromagnetic radiation and with a portion below the surface which includes material that absorbs the radiation, the face of the structure being formed with numerous steep ridges. The steepness of the dielectric material results in a high proportion of the electromagnetic energy passing through the surface for absorption by the absorbing material under the surface. A backing of aluminum or other highly heat-conductive and reflective material lies under the face and has very steep protuberances supporting the absorbing and dielectric materials.

  2. Hydroxyl radical scavenging assay of phenolics and flavonoids with a modified cupric reducing antioxidant capacity (CUPRAC) method using catalase for hydrogen peroxide degradation.

    PubMed

    Ozyürek, Mustafa; Bektaşoğlu, Burcu; Güçlü, Kubilay; Apak, Reşat

    2008-06-02

    Hydroxyl radicals (OH) generated in the human body may play an important role in tissue injury at sites of inflammation in oxidative stress-originated diseases. As a more convenient, efficient, and less costly alternative to HPLC/electrochemical detection techniques and to the nonspecific, low-yield deoxyribose (TBARS) test, we used a salicylate probe for detecting OH generated by the reaction of iron(II)-EDTA complex with H(2)O(2). The produced hydroxyl radicals attack both the salicylate probe and the hydroxyl radical scavengers that are incubated in solution for 10 min. Added radical scavengers compete with salicylate for the OH produced, and diminish chromophore formation from Cu(II)-neocuproine. At the end of the incubation period, the reaction was stopped by adding catalase. With the aid of this reaction, a kinetic approach was adopted to assess the hydroxyl radical scavenging properties of polyphenolics, flavonoids and other compounds (e.g., ascorbic acid, glucose, mannitol). A second-order rate constant for the reaction of the scavenger with OH could be deduced from the inhibition of colour formation due to the salicylate probe. In addition to phenolics and flavonoids, five kinds of herbs were evaluated for their OH scavenging activity using the developed method. The modified CUPRAC (cupric ion reducing antioxidant capacity) assay proved to be efficient for ascorbic acid, gallic acid and chlorogenic acid, for which the deoxyribose assay test is basically nonresponsive. An important contribution of this developed assay is the inhibition of the Fenton reaction with catalase degradation of hydrogen peroxide so that the remaining H(2)O(2) would neither give a CUPRAC absorbance nor involve in redox cycling of phenolic antioxidants, enabling the rapid assay of polyphenolics.

  3. [Method for determining the acid-reducing capacity of antacid preparations].

    PubMed

    Chakŭrski, I; Dobrev, Kh; Dobreva, P

    1986-01-01

    A method is proposed for the determination of acid-binding ability of antacids, enabling the automatic reading of pH changes. Changes are provided for work with original gastric juice. The method allows the determination of individual dosage of antacid for each patient.

  4. [Method of determining serum iron and iron-binding capacity without protein precipitation in very young children].

    PubMed

    Chenusha, V P; Voronka, G Sh

    1978-01-01

    A modification of bathophenanthroline method is described. The method was used for diagnostics of anemia and in order to control the treatment of anemia in children of early ages. The method was checked by estimation of known concentrations of iron in solutions as well as by addition of known amounts of iron to blood serum. Standard deviations ranged from +/- 1.04 to +/- 6.5 and variation coefficient--from 0.5% to 10%. Normal values of iron content and of iron-binding capacity of blood serum, estimated by means of the modified method in 30 healthy children of early ages, did not differ from the corresponding data published in the literature.

  5. Load controller and method to enhance effective capacity of a photovotaic power supply using a dynamically determined expected peak loading

    DOEpatents

    Perez, Richard

    2003-04-01

    A load controller and method are provided for maximizing effective capacity of a non-controllable, renewable power supply coupled to a variable electrical load also coupled to a conventional power grid. Effective capacity is enhanced by monitoring power output of the renewable supply and loading, and comparing the loading against the power output and a load adjustment threshold determined from an expected peak loading. A value for a load adjustment parameter is calculated by subtracting the renewable supply output and the load adjustment parameter from the current load. This value is then employed to control the variable load in an amount proportional to the value of the load control parameter when the parameter is within a predefined range. By so controlling the load, the effective capacity of the non-controllable, renewable power supply is increased without any attempt at operational feedback control of the renewable supply. The expected peak loading of the variable load can be dynamically determined within a defined time interval with reference to variations in the variable load.

  6. A hybrid method based on Band Pass Filter and Correlation Algorithm to improve debris sensor capacity

    NASA Astrophysics Data System (ADS)

    Hong, Wei; Wang, Shaoping; Liu, Haokuo; Tomovic, Mileta M.; Chao, Zhang

    2017-01-01

    The inductive debris detection is an effective method for monitoring mechanical wear, and could be used to prevent serious accidents. However, debris detection during early phase of mechanical wear, when small debris (<100 um) is generated, requires that the sensor has high sensitivity with respect to background noise. In order to detect smaller debris by existing sensors, this paper presents a hybrid method which combines Band Pass Filter and Correlation Algorithm to improve sensor signal-to-noise ratio (SNR). The simulation results indicate that the SNR will be improved at least 2.67 times after signal processing. In other words, this method ensures debris identification when the sensor's SNR is bigger than -3 dB. Thus, smaller debris will be detected in the same SNR. Finally, effectiveness of the proposed method is experimentally validated.

  7. Category's analysis and operational project capacity method of transformation in design

    NASA Astrophysics Data System (ADS)

    Obednina, S. V.; Bystrova, T. Y.

    2015-10-01

    The method of transformation is attracting widespread interest in fields such contemporary design. However, in theory of design little attention has been paid to a categorical status of the term "transformation". This paper presents the conceptual analysis of transformation based on the theory of form employed in the influential essays by Aristotle and Thomas Aquinas. In the present work the transformation as a method of shaping design has been explored as well as potential application of this term in design has been demonstrated.

  8. "Smart" Electromechanical Shock Absorber

    NASA Technical Reports Server (NTRS)

    Stokes, Lebarian; Glenn, Dean C.; Carroll, Monty B.

    1989-01-01

    Shock-absorbing apparatus includes electromechanical actuator and digital feedback control circuitry rather than springs and hydraulic damping as in conventional shock absorbers. Device not subject to leakage and requires little or no maintenance. Attenuator parameters adjusted in response to sensory feedback and predictive algorithms to obtain desired damping characteristic. Device programmed to decelerate slowly approaching vehicle or other large object according to prescribed damping characteristic.

  9. Capacity-loss diagnostic and life-time prediction in lithium-ion batteries: Part 1. Development of a capacity-loss diagnostic method based on open-circuit voltage analysis

    NASA Astrophysics Data System (ADS)

    Wang, Tiansi; Pei, Lei; Wang, Tingting; Lu, Rengui; Zhu, Chunbo

    2016-01-01

    Effective capacity-loss diagnosis and life-time prediction are the foundations of battery second-use technology and will play an important role in the development of the new energy industry. Of the two, the capacity-loss diagnostic, as a precondition of the life-time prediction, needs to be studied first. Performing a capacity-loss diagnosis for an aging cell consists of finding the decisive degradation mechanisms for the cell's capacity degradation. Because a cell's capacity just equals the span of the open-circuit voltage (OCV), when suspect degradation mechanisms affect a cell's capacity, they will leave corresponding and particular clues in the OCV curve. Taking a cell's OCV as the diagnostic indicator, a multi-mechanistic and non-destructive diagnostic method is developed in this paper. To establish an unambiguous relationship between OCV changes and the combinations of the decisive mechanisms, all the possible OCV changes under various aging situations are systematically analyzed based on a novel simultaneous coordinate system, in which the effects of each suspect capacity-loss mechanism on the OCV curve can be clearly represented. As a summary of the analysis results, a straightforward diagnostic flowchart is presented. By following the flowchart, an aging cell can be diagnosed within three steps by observation of the OCV changes.

  10. Colour, phenolic content and antioxidant capacity of some fruits dehydrated by a combination of different methods.

    PubMed

    Chong, Chien Hwa; Law, Chung Lim; Figiel, Adam; Wojdyło, Aneta; Oziembłowski, Maciej

    2013-12-15

    The objective of this study was to improve product quality of dehydrated fruits (apple, pear, papaya, mango) using combined drying techniques. This involved investigation of bioactivity, colour, and sensory assessment on colour of the dried products as well as the retention of the bio-active ingredients. The attributes of quality were compared in regard to the quality of dehydrated samples obtained from continuous heat pump (HP) drying technique. It was found that for apple, pear and mango the total colour change (ΔE) of samples dried using continuous heat pump (HP) or heat pump vacuum-microwave (HP/VM) methods was lower than of samples dried by other combined methods. However, for papaya, the lowest colour change exhibited by samples dried using hot air-cold air (HHC) method and the highest colour change was found for heat pump (HP) dehydrated samples. Sensory evaluation revealed that dehydrated pear with higher total colour change (ΔE) is more desirable because of its golden yellow appearance. In most cases the highest phenol content was found from fruits dried by HP/VM method. Judging from the quality findings on two important areas namely colour and bioactivity, it was found that combined drying method consisted of HP pre-drying followed by VM finish drying gave the best results for most dehydrated fruits studied in this work as the fruits contain first group of polyphenol compounds, which preferably requires low temperature followed by rapid drying strategy.

  11. A Capacity Design Method of Distributed Battery Storage for Controlling Power Variation with Large-Scale Photovoltaic Sources in Distribution Network

    NASA Astrophysics Data System (ADS)

    Kobayashi, Yasuhiro; Sawa, Toshiyuki; Gunji, Keiko; Yamazaki, Jun; Watanabe, Masahiro

    A design method for distributed battery storage capacity has been developed for evaluating battery storage advantage on demand-supply imbalance control in distribution systems with which large-scale home photovoltaic powers connected. The proposed method is based on a linear storage capacity minimization model with design basis demand load and photovoltaic output time series subjective to battery management constraints. The design method has been experimentally applied to a sample distribution system with substation storage and terminal area storage. From the numerical results, the developed method successfully clarifies the charge-discharge control and stored power variation, satisfies peak cut requirement, and pinpoints the minimum distributed storage capacity.

  12. Effects of carrying methods and box handles on two-person team carrying capacity for females.

    PubMed

    Wu, Swei-Pi; Chang, Shu-Yu

    2010-07-01

    This study used a psychophysical approach to examine the effects of carrying methods and the presence or absence of box handles on the maximum acceptable weight carried and resulting responses (heart rate and rating of perceived exertion) in a two-person carrying task. After training, 16 female subjects performed a two-person carrying task at knuckle height for an 8-h work period. Each subject performed 4 different carrying combinations two times. The independent variables were carrying methods (parallel and tandem walking) and box handles (with and without handles). For comparison with two-person carrying, the subjects also performed one-person carrying. The results showed that the maximum acceptable weight carried (MAWC), heart rate (HR), and rating of perceived exertion (RPE) were significantly affected by the presence of box handles. However, the subjects' MAWC, HR, and RPE values were not significantly influenced by the carrying methods. The test-retest reliability of the psychophysical approach was 0.945. The carrying efficiency of two-person carrying was 96.2% of the one-person carrying method. In general, the use of box with handles allows the subjects to carry a higher MAWC (with lower HR and RPE) compared to carrying boxes without handles.

  13. 21 CFR 130.12 - General methods for water capacity and fill of containers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... method: (1) In the case of a container with lid attached by double seam, cut out the lid without removing... weight of water required to fill the container. In the case of a container with lid attached otherwise than by double seam, remove the lid and proceed as directed in paragraphs (a) (2) to (4) of...

  14. 21 CFR 130.12 - General methods for water capacity and fill of containers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... method: (1) In the case of a container with lid attached by double seam, cut out the lid without removing... weight of water required to fill the container. In the case of a container with lid attached otherwise than by double seam, remove the lid and proceed as directed in paragraphs (a) (2) to (4) of...

  15. 21 CFR 130.12 - General methods for water capacity and fill of containers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... method: (1) In the case of a container with lid attached by double seam, cut out the lid without removing... weight of water required to fill the container. In the case of a container with lid attached otherwise than by double seam, remove the lid and proceed as directed in paragraphs (a) (2) to (4) of...

  16. Participatory Training Evaluation Method (PATEM) as a Collaborative Evaluation Capacity Building Strategy

    ERIC Educational Resources Information Center

    Kuzmin, Alexey

    2012-01-01

    This article describes Participatory Training Evaluation Method (PATEM) of measuring participants' reaction to the training. PATEM provides rich information; allows to document evaluation findings; becomes organic part of the training that helps participants process their experience individually and as a group; makes sense to participants; is an…

  17. A dynamic method for the investigation of induced state metabolic capacities as a function of temperature

    PubMed Central

    2013-01-01

    Background Science-based recombinant bioprocess designs as well as the design of statistical experimental plans for process optimization (Design of Experiments, DoE) demand information on physiological bioprocess boundaries, such as the onset of acetate production, adaptation times, mixed feed metabolic capabilities or induced state maximum metabolic rates as at the desired cultivation temperature. Dynamic methods provide experimental alternatives to determine this information in a fast and efficient way. Information on maximum metabolic capabilities as a function of temperature is needed in case a reduced cultivation temperature is desirable (e.g. to avoid inclusion body formation) and an appropriate feeding profile is to be designed. Results Here, we present a novel dynamic method for the determination of the specific growth rate as a function of temperature for induced recombinant bacterial bioprocesses. The method is based on the control of the residual substrate concentration at non-limiting conditions with dynamic changes in cultivation temperature. The presented method was automated in respect to information extraction and closed loop control by means of in-line Fourier Transformation Infrared Spectroscopy (FTIR) residual substrate measurements and on-line first principle rate-based soft-sensors. Maximum induced state metabolic capabilities as a function of temperature were successfully extracted for a recombinant E. coli C41 fed-batch bioprocess without the need for sampling in a time frame of 20 hours. Conclusions The presented method was concluded to allow the fast and automated extraction of maximum metabolic capabilities (specific growth rate) as a function of temperature. This complements the dynamic toolset necessary for science-based recombinant bacterial bioprocess design and DoE design. PMID:24127686

  18. Exploration of methods to identify polymorphisms associated with variation in DNA repair capacity phenotypes

    SciTech Connect

    Jones, I M; Thomas, C B; Xi, T; Mohrenweiser, H W; Nelson, D O

    2006-07-03

    Elucidating the relationship between polymorphic sequences and risk of common disease is a challenge. For example, although it is clear that variation in DNA repair genes is associated with familial cancer, aging and neurological disease, progress toward identifying polymorphisms associated with elevated risk of sporadic disease has been slow. This is partly due to the complexity of the genetic variation, the existence of large numbers of mostly low frequency variants and the contribution of many genes to variation in susceptibility. There has been limited development of methods to find associations between genotypes having many polymorphisms and pathway function or health outcome. We have explored several statistical methods for identifying polymorphisms associated with variation in DNA repair phenotypes. The model system used was 80 cell lines that had been resequenced to identify variation; 191 single nucleotide substitution polymorphisms (SNPs) are included, of which 172 are in 31 base excision repair pathway genes, 19 in 5 anti-oxidation genes, and DNA repair phenotypes based on single strand breaks measured by the alkaline Comet assay. Univariate analyses were of limited value in identifying SNPs associated with phenotype variation. Of the multivariable model selection methods tested: the easiest that provided reduced error of prediction of phenotype was simple counting of the variant alleles predicted to encode proteins with reduced activity, which led to a genotype including 52 SNPs; the best and most parsimonious model was achieved using a two-step analysis without regard to potential functional relevance: first SNPs were ranked by importance determined by Random Forests Regression (RFR), followed by cross-validation in a second round of RFR modeling that included ever more SNPs in declining order of importance. With this approach 6 SNPs were found to minimize prediction error. The results should encourage research into utilization of multivariate

  19. Synthesis and Evaluation of the Anti-Oxidant Capacity of Curcumin Glucuronides, the Major Curcumin Metabolites

    PubMed Central

    Choudhury, Ambar K.; Raja, Suganya; Mahapatra, Sanjata; Nagabhushanam, Kalyanam; Majeed, Muhammed

    2015-01-01

    Curcumin metabolites namely curcumin monoglucuronide and curcumin diglucuronide were synthesized using an alternative synthetic approach. The anti-oxidant potential of these curcumin glucuronides was compared with that of curcumin using DPPH scavenging method and Oxygen Radical Absorbance Capacity (ORAC) assay. The results show that curcumin monoglucuronide exhibits 10 fold less anti-oxidant activity (DPPH method) and the anti-oxidant capacity of curcumin diglucuronide is highly attenuated compared to the anti-oxidant activity of curcumin. PMID:26783957

  20. Yield, Composition and Antioxidant Capacity of the Essential Oil of Sweet Basil and Holy Basil as Influenced by Distillation Methods.

    PubMed

    Shiwakoti, Santosh; Saleh, Osama; Poudyal, Shital; Barka, Abdulssamad; Qian, Yanping; Zheljazkov, Valtcho D

    2017-04-01

    The profile and bioactivity of essential oil (EO) depends on genetic, environmental, and other factors. We hypothesized that the basil EO may be influenced by the distillation methods. Hence, a study was conducted to evaluate the effect of steam distillation (SD) and hydrodistillation (HD) extraction method on the yield, composition, and bioactivity of EO of sweet basil (Ocimum basilicum) and holy basil (Ocimum tenuiflorum). In both basil species, the EO yield (content) was significantly higher from SD than from HD. There were significant differences in the compounds' concentrations of EO obtained from SD and HD as well, however, the same compounds were identified in the EO from HD and SD. In the EO of O. basilicum, the concentration of 74% of the identified compounds were higher in SD than HD, whereas in the EO of O. tenuiflorum, the concentration of 84% of identified compounds were higher in SD than in HD. However, the concentrations of two of the major compounds of O. basilicum EO (estragole and methyl cinnamate) and a major compound of O. tenuiflorum EO (methyl eugenol) were significantly higher in HD than in SD. The type of distillation did not affect the antioxidant capacity of basil EO within the species. This study demonstrated that the type of distillation may significantly affect oil yield and composition but not the antioxidant capacity of the EO from sweet and holy basil.

  1. Synthesis of bilayer MoS{sub 2} nanosheets by a facile hydrothermal method and their methyl orange adsorption capacity

    SciTech Connect

    Ye, Lijuan; Xu, Haiyan; Zhang, Dingke; Chen, Shijian

    2014-07-01

    Highlights: • Hexagonal phase of MoS{sub 2} nanosheets was synthesized by a facile hydrothermal method. • FE-SEM and TEM images show the sheets-like morphology of MoS{sub 2}. • Bilayer MoS{sub 2} can be grown under the optimized mole ratio of 2:1 of S:Mo at 180 °C for 50 h. • The MoS{sub 2} nanosheets possess high methyl orange adsorption capacity due to the large surface area. - Abstract: Molybdenum disulfide (MoS{sub 2}) nanosheets have received significant attention recently due to the potential applications for exciting physics and technology. Here we show that MoS{sub 2} nanosheets can be prepared by a facile hydrothermal method. The study of the properties of the MoS{sub 2} nanosheets prepared at different conditions suggests that the mole ratio of precursors and hydrothermal time significantly influences the purity, crystalline quality and thermal stability of MoS{sub 2}. X-ray diffraction, Raman spectra and transmission electron microscopy results indicate that bilayer MoS{sub 2} can be grown under an optimized mole ratio of 2:1 of S:Mo at 180 °C for 50 h. Moreover, such ultrathin nanosheets exhibit a prominent photoluminescence and possess high methyl orange adsorption capacity due to the large surface area, which can be potentially used in photodevice and photochemical catalyst.

  2. HPLC method for the quantification of procyanidins in cocoa and chocolate samples and correlation to total antioxidant capacity.

    PubMed

    Adamson, G E; Lazarus, S A; Mitchell, A E; Prior, R L; Cao, G; Jacobs, P H; Kremers, B G; Hammerstone, J F; Rucker, R B; Ritter, K A; Schmitz, H H

    1999-10-01

    Monomeric and oligomeric procyanidins present in cocoa liquors and chocolates were separated and quantified in four different laboratories using a normal-phase high-performance liquid chromatography (HPLC) method with fluorescence detection. Procyanidin standards through decamers were obtained by extraction from cocoa beans, enrichment by Sephadex LH-20 gel permeation chromatography, and final purification by preparative normal-phase HPLC. The purity of each oligomeric fraction was assessed using HPLC coupled to mass spectrometry. A composite standard was then prepared, and calibration curves were generated for each oligomeric class using a quadratic fit of area sum versus concentration. Results obtained by each of the laboratories were in close agreement, which suggests this method is reliable and reproducible for quantification of procyanidins. Furthermore, the procyanidin content of the samples was correlated to the antioxidant capacity measured using the ORAC assay as an indicator for potential biological activity.

  3. Evaluation of the remineralization capacity of CPP-ACP containing fluoride varnish by different quantitative methods

    PubMed Central

    SAVAS, Selcuk; KAVRÌK, Fevzi; KUCUKYÌLMAZ, Ebru

    2016-01-01

    ABSTRACT Objective The aim of this study was to evaluate the efficacy of CPP-ACP containing fluoride varnish for remineralizing white spot lesions (WSLs) with four different quantitative methods. Material and Methods Four windows (3x3 mm) were created on the enamel surfaces of bovine incisor teeth. A control window was covered with nail varnish, and WSLs were created on the other windows (after demineralization, first week and fourth week) in acidified gel system. The test material (MI Varnish) was applied on the demineralized areas, and the treated enamel samples were stored in artificial saliva. At the fourth week, the enamel surfaces were tested by surface microhardness (SMH), quantitative light-induced fluorescence-digital (QLF-D), energy-dispersive spectroscopy (EDS) and laser fluorescence (LF pen). The data were statistically analyzed (α=0.05). Results While the LF pen measurements showed significant differences at baseline, after demineralization, and after the one-week remineralization period (p<0.05), the difference between the 1- and 4-week was not significant (p>0.05). With regards to the SMH and QLF-D analyses, statistically significant differences were found among all the phases (p<0.05). After the 1- and 4-week treatment periods, the calcium (Ca) and phosphate (P) concentrations and Ca/P ratio were higher compared to those of the demineralization surfaces (p<0.05). Conclusion CPP-ACP containing fluoride varnish provides remineralization of WSLs after a single application and seems suitable for clinical use. PMID:27383699

  4. Comparison between methods using copper, lanthanum, and colorimetry for the determination of the cation exchange capacity of plant cell walls.

    PubMed

    Wehr, J Bernhard; Blamey, F Pax C; Menzies, Neal W

    2010-04-28

    The determination of the cation exchange capacity (CEC) of plant cell walls is important for many physiological studies. We describe the determination of cell wall CEC by cation binding, using either copper (Cu) or lanthanum (La) ions, and by colorimetry. Both cations are strongly bound by cell walls, permitting fast and reproducible determinations of the CEC of small samples. However, the dye binding methods using two cationic dyes, Methylene Blue and Toluidine Blue, overestimated the CEC several-fold. Column and centrifugation methods are proposed for CEC determination by Cu or La binding; both provide similar results. The column method involves packing plant material (2-10 mg dry mass) in a chromatography column (10 mL) and percolating with 20 bed volumes of 1 mM La or Cu solution, followed by washing with deionized water. The centrifugation method uses a suspension of plant material (1-2 mL) that is centrifuged, and the pellet is mixed three times with 10 pellet volumes of 1 mM La or Cu solution followed by centrifugation and final washing with deionized water. In both methods the amount of La or Cu bound to the material was determined by spectroscopic methods.

  5. Unidirectional perfect absorber

    PubMed Central

    Jin, L.; Wang, P.; Song, Z.

    2016-01-01

    This study proposes a unidirectional perfect absorber (UPA), which we realized with a two-arm Aharonov-Bohm interferometer, that consists of a dissipative resonator side-coupled to a uniform resonator array. The UPA has reflection-less full absorption on one direction, and reflectionless full transmission on the other, with an appropriate magnetic flux and coupling, detuning, and loss of the side-coupled resonator. The magnetic flux controls the transmission, the left transmission is larger for magnetic flux less than one-half flux quantum; and the right transmission is larger for magnetic flux between one-half and one flux quantum. Besides, a perfect absorber (PA) can be realized based on the UPA, in which light waves from both sides, with arbitrary superposition of the ampli- tude and phase, are perfectly absorbed. The UPA is expected to be useful in the design of novel optical devices. PMID:27615125

  6. Shock absorber servicing tool

    NASA Technical Reports Server (NTRS)

    Koepler, Jack L. (Inventor); Hill, Robert L. (Inventor)

    1981-01-01

    A tool to assist in the servicing of a shock absorber wherein the shock absorber is constructed of a pair of aligned gas and liquid filled chambers. Each of the chambers is separated by a movable separator member. Maximum efficiency of the shock absorber is achieved in the locating of a precise volume of gas within the gas chamber and a precise volume of liquid within the liquid chamber. The servicing tool of this invention employs a rod which is to connect with the separator and by observation of the position of the rod with respect to the gauge body, the location of the separator is ascertained even though it is not directly observable.

  7. Unidirectional perfect absorber

    NASA Astrophysics Data System (ADS)

    Jin, L.; Wang, P.; Song, Z.

    2016-09-01

    This study proposes a unidirectional perfect absorber (UPA), which we realized with a two-arm Aharonov-Bohm interferometer, that consists of a dissipative resonator side-coupled to a uniform resonator array. The UPA has reflection-less full absorption on one direction, and reflectionless full transmission on the other, with an appropriate magnetic flux and coupling, detuning, and loss of the side-coupled resonator. The magnetic flux controls the transmission, the left transmission is larger for magnetic flux less than one-half flux quantum; and the right transmission is larger for magnetic flux between one-half and one flux quantum. Besides, a perfect absorber (PA) can be realized based on the UPA, in which light waves from both sides, with arbitrary superposition of the ampli- tude and phase, are perfectly absorbed. The UPA is expected to be useful in the design of novel optical devices.

  8. Borehole geophysical methods for analyzing specific capacity of multiaquifer wells : ground-water hydraulics

    USGS Publications Warehouse

    Bennett, Gordon D.; Patten, Eugene P.

    1960-01-01

    Conventional well-logging techniques, combined with measurements of flow velocity in the borehole, can provide information on the discharge-drawdown characteriBtic8 of the several aquifers penetrated by a well. The information is most conveniently presented in a graph showing aquifer discharges as functions of the water level in the well at a particular time. To determine the discharge-drawdown characteristics, a well is pumped at a steady rate for a certain length of time. While the well is being pumped, measurements are made of drawdown and of the discharge rates of the individual aquifers within the well. Discharge rates and drawdowns ,are usually recorded as functions of time, and their values for any given time during the test are obtained by interpolation. The procedure is repeated for several different rates of total well discharge. The well may be allowed to recover after each step, or discharge may be changed from one rate to another, and changes in discharge and drawdown may be measured by extrapolation. The flow measurements within the well may be made by use of a subsurface flowmeter or by one of several techniques involving the injection of electrolytic or radioactive tracers. The method was tested on a well in Mercer County, Pa., and provided much useful information on aquifer yields, 'thieving,' and hydrostatic heads of the individual zones.

  9. Leaf absorbance and photosynthesis

    NASA Technical Reports Server (NTRS)

    Schurer, Kees

    1994-01-01

    The absorption spectrum of a leaf is often thought to contain some clues to the photosynthetic action spectrum of chlorophyll. Of course, absorption of photons is needed for photosynthesis, but the reverse, photosynthesis when there is absorption, is not necessarily true. As a check on the existence of absorption limits we measured spectra for a few different leaves. Two techniques for measuring absorption have been used, viz. the separate determination of the diffuse reflectance and the diffuse transmittance with the leaf at a port of an integrating sphere and the direct determination of the non-absorbed fraction with the leaf in the sphere. In a cross-check both methods yielded the same results for the absorption spectrum. The spectrum of a Fuchsia leaf, covering the short-wave region from 350 to 2500 nm, shows a high absorption in UV, blue and red, the well known dip in the green and a steep fall-off at 700 nm. Absorption drops to virtually zero in the near infrared, with subsequent absorptions, corresponding to the water absorption bands. In more detailed spectra, taken at 5 nm intervals with a 5 nm bandwidth, differences in chlorophyll content show in the different depths of the dip around 550 nm and in a small shift of the absorption edge at 700 nm. Spectra for Geranium (Pelargonium zonale) and Hibiscus (with a higher chlorophyll content) show that the upper limit for photosynthesis can not be much above 700 nm. No evidence, however, is to be seen of a lower limit for photosynthesis and, in fact, some experiments down to 300 nm still did not show a decrease of the absorption although it is well recognized that no photosynthesis results with 300 nm wavelengths.

  10. Shock Absorbing System

    NASA Astrophysics Data System (ADS)

    1982-01-01

    A lightweight, inexpensive shock-absorbing system, developed by Langley Research Center 20 years ago, is now in service as safety device for an automated railway at Duke University Medical Center. The transportation system travels at about 25 miles per hour, carrying patients, visitors, staff and cargo. At the end of each guideway of the system are "frangible," (breakable) tube "buffers." If a slowing car fails to make a complete stop at the terminal, it would bump and shatter the tubes, absorbing energy that might otherwise jolt the passengers or damage the vehicle.

  11. A quick and inexpensive method to quantify spatially variable infiltration capacity for artificial recharge ponds using photographic images

    NASA Astrophysics Data System (ADS)

    Pedretti, Daniele; Barahona-Palomo, Marco; Bolster, Diogo; Sanchez-Vila, Xavier; Fernàndez-Garcia, Daniel

    2012-04-01

    SummaryThe efficiency of artificial surface ponds (SPs) for managed aquifer recharge (MAR) is mostly controlled by the topmost portion of the soil. The most significant soil property controlling recharge is the infiltration capacity (Ic), which is highly variable in space. Assessing its spatial distribution in detail is prohibitive in practice due to high costs, time effort, and limited site accessibility. We present an alternative method for a quick and low-cost quantitative estimation of the spatial distribution of Ic based on satellite images. The fact that hydraulic properties of topsoils and color intensities of digital images depend on some common factors such as moisture content, nature and organization of grains, proportion of iron, and organic and clay content among others, allow us to infer infiltration capacities from color intensities. The relationship between these two variables is site specific and requires calibration. A pilot SP site in Catalonia (Spain) is used as an application example. Two high-resolution digital images of the site are provided at no cost by the local cartographic institute as well as from a popular Internet-based map server. An initial set of local infiltration experiments, randomly located, were found to correlate to color intensities of the digital images. This relationship was then validated against additional independent measurements. The resulting maps of infiltration were then used to estimate the total maximum infiltration of the artificial pond area, the results being consistent with an independent flooding test performed at the site.

  12. IPR 1.0: an efficient method for calculating solar radiation absorbed by individual plants in sparse heterogeneous woody plant communities

    NASA Astrophysics Data System (ADS)

    Zhang, Y.; Chen, W.; Li, J.

    2013-12-01

    Climate change may alter the spatial distribution, composition, structure, and functions of plant communities. Transitional zones between biomes, or ecotones, are particularly sensitive to climate change. Ecotones are usually heterogeneous with sparse trees. The dynamics of ecotones are mainly determined by the growth and competition of individual plants in the communities. Therefore it is necessary to calculate solar radiation absorbed by individual plants for understanding and predicting their responses to climate change. In this study, we developed an individual plant radiation model, IPR (version 1.0), to calculate solar radiation absorbed by individual plants in sparse heterogeneous woody plant communities. The model is developed based on geometrical optical relationships assuming crowns of woody plants are rectangular boxes with uniform leaf area density. The model calculates the fractions of sunlit and shaded leaf classes and the solar radiation absorbed by each class, including direct radiation from the sun, diffuse radiation from the sky, and scattered radiation from the plant community. The solar radiation received on the ground is also calculated. We tested the model by comparing with the analytical solutions of random distributions of plants. The tests show that the model results are very close to the averages of the random distributions. This model is efficient in computation, and is suitable for ecological models to simulate long-term transient responses of plant communities to climate change.

  13. IPR 1.0: an efficient method for calculating solar radiation absorbed by individual plants in sparse heterogeneous woody plant communities

    NASA Astrophysics Data System (ADS)

    Zhang, Y.; Chen, W.; Li, J.

    2014-07-01

    Climate change may alter the spatial distribution, composition, structure and functions of plant communities. Transitional zones between biomes, or ecotones, are particularly sensitive to climate change. Ecotones are usually heterogeneous with sparse trees. The dynamics of ecotones are mainly determined by the growth and competition of individual plants in the communities. Therefore it is necessary to calculate the solar radiation absorbed by individual plants in order to understand and predict their responses to climate change. In this study, we developed an individual plant radiation model, IPR (version 1.0), to calculate solar radiation absorbed by individual plants in sparse heterogeneous woody plant communities. The model is developed based on geometrical optical relationships assuming that crowns of woody plants are rectangular boxes with uniform leaf area density. The model calculates the fractions of sunlit and shaded leaf classes and the solar radiation absorbed by each class, including direct radiation from the sun, diffuse radiation from the sky, and scattered radiation from the plant community. The solar radiation received on the ground is also calculated. We tested the model by comparing with the results of random distribution of plants. The tests show that the model results are very close to the averages of the random distributions. This model is efficient in computation, and can be included in vegetation models to simulate long-term transient responses of plant communities to climate change. The code and a user's manual are provided as Supplement of the paper.

  14. The nonlinear piezoelectric tuned vibration absorber

    NASA Astrophysics Data System (ADS)

    Soltani, P.; Kerschen, G.

    2015-07-01

    This paper proposes a piezoelectric vibration absorber, termed the nonlinear piezoelectric tuned vibration absorber (NPTVA), for the mitigation of nonlinear resonances of mechanical systems. The new feature of the NPTVA is that its nonlinear restoring force is designed according to a principle of similarity, i.e., the NPTVA should be an electrical analog of the nonlinear host system. Analytical formulas for the NPTVA parameters are derived using the homotopy perturbation method. Doing so, a nonlinear generalization of Den Hartog’s equal-peak tuning rule is developed for piezoelectric vibration absorbers.

  15. An environment-friendly and multi-functional absorbent from chitosan for organic pollutants and heavy metal ion.

    PubMed

    Li, Ang; Lin, Runjun; Lin, Chong; He, Bianyang; Zheng, Tingting; Lu, Lingbin; Cao, Yang

    2016-09-05

    Developing environment-friendly green absorbents for disposal of wastewater remains to be studied. In this paper, the cross-linked chitosan aerogel (CsA) as an environment-friendly absorbent was obtained by a simple method involving cross-linked process and freeze drying technique. Compared with conventional absorbents, the porous chitosan aerogel was provided with unique properties such as low density (0.0283g/cm(3)), high porosity (97.98%) and outstanding adsorption performance. The chitosan aerogel also displayed good reusability and excellent elasticity with a maximal thickness recovery up to 96.8% of the original thickness. The as-prepared absorbent exhibited preferable adsorption capacities for crude oil, diesel and copper ion (41.07g/g, 31.07g/g and 21.38mg/g, respectively). The aerogel can collect a wide range of organic solvents and oils with absorption capacities up to 40 times their own weight, depending on the density and viscosity of the liquids. The adsorption capacity for heavy metal ion was also considerable and the maximum adsorption capacity (qm) of the aerogel for copper ion was 35.08mg/g according to Langmuir isotherm model. Consequently, the chitosan aerogel with versatile adsorption properties has a good potential for wastewater treatment in environmental application.

  16. Solar concentrator/absorber

    NASA Technical Reports Server (NTRS)

    Von Tiesenhausen, G. F.

    1976-01-01

    Collector/energy converter, consisting of dual-slope optical concentrator and counterflow thermal energy absorber, is attached to multiaxis support structure. Efficient over wide range of illumination levels, device may be used to generate high temperature steam, serve as solar powered dryer, or power absorption cycle cooler.

  17. Neutron Absorbing Alloys

    SciTech Connect

    Mizia, Ronald E.; Shaber, Eric L.; DuPont, John N.; Robino, Charles V.; Williams, David B.

    2004-05-04

    The present invention is drawn to new classes of advanced neutron absorbing structural materials for use in spent nuclear fuel applications requiring structural strength, weldability, and long term corrosion resistance. Particularly, an austenitic stainless steel alloy containing gadolinium and less than 5% of a ferrite content is disclosed. Additionally, a nickel-based alloy containing gadolinium and greater than 50% nickel is also disclosed.

  18. Oxygen absorbers in food preservation: a review.

    PubMed

    Cichello, Simon Angelo

    2015-04-01

    The preservation of packaged food against oxidative degradation is essential to establish and improve food shelf life, customer acceptability, and increase food security. Oxygen absorbers have an important role in the removal of dissolved oxygen, preserving the colour, texture and aroma of different food products, and importantly inhibition of food spoilage microbes. Active packaging technology in food preservation has improved over decades mostly due to the sealing of foods in oxygen impermeable package material and the quality of oxygen absorber. Ferrous iron oxides are the most reliable and commonly used oxygen absorbers within the food industry. Oxygen absorbers have been transformed from sachets of dried iron-powder to simple self-adhesive patches to accommodate any custom size, capacity and application. Oxygen concentration can be effectively lowered to 100 ppm, with applications spanning a wide range of food products and beverages across the world (i.e. bread, meat, fish, fruit, and cheese). Newer molecules that preserve packaged food materials from all forms of degradation are being developed, however oxygen absorbers remain a staple product for the preservation of food and pharmaceutical products to reduce food wastage in developed nations and increased food security in the developing & third world.

  19. Determination of the relative contribution of quercetin and its glucosides to the antioxidant capacity of onion by cyclic voltammetry and spectrophotometric methods.

    PubMed

    Zielinska, Danuta; Wiczkowski, Wieslaw; Piskula, Mariusz Konrad

    2008-05-28

    This paper describes the use of cyclic voltammetry (CV), spectrophotometric methods [Trolox equivalent antioxidant capacity (TEAC), peroxyl radical trapping capacity (PRTC), DPPH radical scavenging activity (RSA), and Folin-Ciocalteu reagent (FCR) reducing capacity], and photochemiluminescence (PCL) for the measurement of the antioxidant capacity of onion var. Sochaczewska and var. Szalotka. The antioxidant and reducing activity of the dominant onion flavonoids quercetin (Q), quercetin-3- O-beta-glucoside (Q3G), quercetin-4'- O-beta-glucoside (Q4'G), and quercetin-3,4'-di- O-beta-glucoside (Q3,4'G) were determined by spectrophotometric (TEAC and PRTC) and CV methods, respectively. The contribution of quercetin and its glucosides to the antioxidant capacity of onion was calculated in consequence of the qualitative and quantitative analysis of onion flavonoids by high-performance liquid chromatography-ultraviolet-mass spectrometry. The dominant forms of quercetin in the onion var. Sochaczewska and Szalotka included Q4'G (61 and 54%), Q3,4'G (37 and 44%), Q3G (1.4 and 1.1%), and free quercetin (1.1 and 0.7%), respectively. The CV experiment showed the highest reducing activity of Q while Q3G, Q4'G, and Q3,4'G exhibited about 68, 51, and 30% of the reducing power noted for Q. The order of the reducing activity of onion flavonoids was confirmed by their free radical scavenging activity and evaluated by TEAC and PRTC assays as follows: Q > Q3G > Q4'G > Q3,4'G. The Q4'G and Q3,4'G showed poor antioxidant activity under both applied spectrophotometric assays but still exhibited reducing activity based on CV experiments. The reducing capacity of onions determined by CV method was twice higher than the antioxidant capacity formed by water-soluble compounds (ACW) evaluated by PCL, and it was about 50% higher than PRTC and DPPH RSA results and the converted FCR reducing capacity. In contrast, the reducing capacity of onions determined by the CV method was 3-fold and about four

  20. Shock wave absorber having a deformable liner

    DOEpatents

    Youngdahl, C.K.; Wiedermann, A.H.; Shin, Y.W.; Kot, C.A.; Ockert, C.E.

    1983-08-26

    This invention discloses a shock wave absorber for a piping system carrying liquid. The absorber has a plastically deformable liner defining the normal flow boundary for an axial segment of the piping system, and a nondeformable housing is spaced outwardly from the liner so as to define a gas-tight space therebetween. The flow capacity of the liner generally corresponds to the flow capacity of the piping system line, but the liner has a noncircular cross section and extends axially of the piping system line a distance between one and twenty times the diameter thereof. Gas pressurizes the gas-tight space equal to the normal liquid pressure in the piping system. The liner has sufficient structural capacity to withstand between one and one-half and two times this normal liquid pressures; but at greater pressures it begins to plastically deform initially with respect to shape to a more circular cross section, and then with respect to material extension by circumferentially stretching the wall of the liner. A high energy shock wave passing through the liner thus plastically deforms the liner radially into the gas space and progressively also as needed in the axial direction of the shock wave to minimize transmission of the shock wave beyond the absorber.

  1. High-performance liquid chromatography - Ultraviolet method for the determination of total specific migration of nine ultraviolet absorbers in food simulants based on 1,1,3,3-Tetramethylguanidine and organic phase anion exchange solid phase extraction to remove glyceride.

    PubMed

    Wang, Jianling; Xiao, Xiaofeng; Chen, Tong; Liu, Tingfei; Tao, Huaming; He, Jun

    2016-06-17

    The glyceride in oil food simulant usually causes serious interferences to target analytes and leads to failure of the normal function of the RP-HPLC column. In this work, a convenient HPLC-UV method for the determination of the total specific migration of nine ultraviolet (UV) absorbers in food simulants was developed based on 1,1,3,3-tetramethylguanidine (TMG) and organic phase anion exchange (OPAE) SPE to efficiently remove glyceride in olive oil simulant. In contrast to the normal ion exchange carried out in an aqueous solution or aqueous phase environment, the OPAE SPE was performed in the organic phase environments, and the time-consuming and challenging extraction of the nine UV absorbers from vegetable oil with aqueous solution could be readily omitted. The method was proved to have good linearity (r≥0.99992), precision (intra-day RSD≤3.3%), and accuracy(91.0%≤recoveries≤107%); furthermore, the lower limit of quantifications (0.05-0.2mg/kg) in five types of food simulants(10% ethanol, 3% acetic acid, 20% ethanol, 50% ethanol and olive oil) was observed. The method was found to be well suited for quantitative determination of the total specific migration of the nine UV absorbers both in aqueous and vegetable oil simulant according to Commission Regulation (EU) No. 10/2011. Migration levels of the nine UV absorbers were determined in 31 plastic samples, and UV-24, UV-531, HHBP and UV-326 were frequently detected, especially in olive oil simulant for UV-326 in PE samples. In addition, the OPAE SPE procedure was also been applied to efficiently enrich or purify seven antioxidants in olive oil simulant. Results indicate that this procedure will have more extensive applications in the enriching or purification of the extremely weak acidic compounds with phenol hydroxyl group that are relatively stable in TMG n-hexane solution and that can be barely extracted from vegetable oil.

  2. Simultaneous measurement of thermal conductivity and heat capacity of bulk and thin film materials using frequency-dependent transient thermoreflectance method.

    PubMed

    Liu, Jun; Zhu, Jie; Tian, Miao; Gu, Xiaokun; Schmidt, Aaron; Yang, Ronggui

    2013-03-01

    The increasing interest in the extraordinary thermal properties of nanostructures has led to the development of various measurement techniques. Transient thermoreflectance method has emerged as a reliable measurement technique for thermal conductivity of thin films. In this method, the determination of thermal conductivity usually relies much on the accuracy of heat capacity input. For new nanoscale materials with unknown or less-understood thermal properties, it is either questionable to assume bulk heat capacity for nanostructures or difficult to obtain the bulk form of those materials for a conventional heat capacity measurement. In this paper, we describe a technique for simultaneous measurement of thermal conductivity κ and volumetric heat capacity C of both bulk and thin film materials using frequency-dependent time-domain thermoreflectance (TDTR) signals. The heat transfer model is analyzed first to find how different combinations of κ and C determine the frequency-dependent TDTR signals. Simultaneous measurement of thermal conductivity and volumetric heat capacity is then demonstrated with bulk Si and thin film SiO2 samples using frequency-dependent TDTR measurement. This method is further testified by measuring both thermal conductivity and volumetric heat capacity of novel hybrid organic-inorganic thin films fabricated using the atomic∕molecular layer deposition. Simultaneous measurement of thermal conductivity and heat capacity can significantly shorten the development∕discovery cycle of novel materials.

  3. Simultaneous activation/sulfurization method for production of sulfurized activated carbons: characterization and Hg(II) adsorption capacity.

    PubMed

    Shamsijazeyi, Hadi; Kaghazchi, Tahereh

    2014-01-01

    As an inexpensive method for modification of activated carbons (ACs), sulfurization has attracted significant attention. However, the resulting sulfurized activated carbons (SACs) often are less porous than the original ACs. In this work, we propose a new method for concurrent sulfurization/activation that can lead to preparation of SACs with more porosity than the corresponding non-sulfurized ACs. By using scanning electron microscopy, nitrogen adsorption/desorption, and iodine number experiments, the porous structure of the SACs has been compared with that of non-sulfurized ACs. The specific surface areas of SACs are higher than the corresponding ACs, regardless of the type of activation agents used. For instance, the specific surface area of SAC and AC activated with phosphoric acid is 1,637 and 1,338 m(2)/g, respectively. Additionally, sulfur contents and surface charges (pHpzc) of the SACs and non-sulfurized ACs are compared. In fact, the SACs have higher sulfur contents and more acidic surfaces. Furthermore, the Hg(II) adsorption capacity of SACs has been compared with the corresponding non-sulfurized ACs. The Hg(II) adsorption isotherms on a selected SAC is measured at different pH values and temperatures. Hg(II) adsorptions as high as 293 mg/g are observed by using SACs prepared by the method proposed in this study.

  4. Effect of different cooking methods on color, phytochemical concentration, and antioxidant capacity of raw and frozen brassica vegetables.

    PubMed

    Pellegrini, Nicoletta; Chiavaro, Emma; Gardana, Claudio; Mazzeo, Teresa; Contino, Daniele; Gallo, Monica; Riso, Patrizia; Fogliano, Vincenzo; Porrini, Marisa

    2010-04-14

    This study evaluated the effect of common cooking practices (i.e., boiling, microwaving, and basket and oven steaming) on the phytochemical content (carotenoids, chlorophylls, glucosinolates, polyphenols, and ascorbic acid), total antioxidant capacity (TAC), and color changes of three generally consumed Brassica vegetables analyzed fresh and frozen. Among cooking procedures, boiling determined an increase of fresh broccoli carotenoids and fresh Brussels sprout polyphenols, whereas a decrease of almost all other phytochemicals in fresh and frozen samples was observed. Steaming procedures determined a release of polyphenols in both fresh and frozen samples. Microwaving was the best cooking method for maintaining the color of both fresh and frozen vegetables and obtaining a good retention of glucosinolates. During all cooking procedures, ascorbic acid was lost in great amount from all vegetables. Chlorophylls were more stable in frozen samples than in fresh ones, even though steaming methods were able to better preserve these compounds in fresh samples than others cooking methods applied. The overall results of this study demonstrate that fresh Brassica vegetables retain phytochemicals and TAC better than frozen samples.

  5. An extremely simple method for fabricating 3D protein microarrays with an anti-fouling background and high protein capacity.

    PubMed

    Lin, Zhifeng; Ma, Yuhong; Zhao, Changwen; Chen, Ruichao; Zhu, Xing; Zhang, Lihua; Yan, Xu; Yang, Wantai

    2014-07-21

    Protein microarrays have become vital tools for various applications in biomedicine and bio-analysis during the past decade. The intense requirements for a lower detection limit and industrialization in this area have resulted in a persistent pursuit to fabricate protein microarrays with a low background and high signal intensity via simple methods. Here, we report on an extremely simple strategy to create three-dimensional (3D) protein microarrays with an anti-fouling background and a high protein capacity by photo-induced surface sequential controlled/living graft polymerization developed in our lab. According to this strategy, "dormant" groups of isopropyl thioxanthone semipinacol (ITXSP) were first introduced to a polymeric substrate through ultraviolet (UV)-induced surface abstraction of hydrogen, followed by a coupling reaction. Under visible light irradiation, the ITXSP groups were photolyzed to initiate surface living graft polymerization of poly(ethylene glycol) methyl methacrylate (PEGMMA), thus introducing PEG brushes to the substrate to generate a full anti-fouling background. Due to the living nature of this graft polymerization, there were still ITXSP groups on the chain ends of the PEG brushes. Therefore, by in situ secondary living graft cross-linking copolymerization of glycidyl methacrylate (GMA) and polyethylene glycol diacrylate (PEGDA), we could finally plant height-controllable cylinder microarrays of a 3D PEG network containing reactive epoxy groups onto the PEG brushes. Through a commonly used reaction of amine and epoxy groups, the proteins could readily be covalently immobilized onto the microarrays. This delicate design aims to overcome two universal limitations in protein microarrays: a full anti-fouling background can effectively eliminate noise caused by non-specific absorption and a 3D reactive network provides a larger protein-loading capacity to improve signal intensity. The results of non-specific protein absorption tests

  6. Suitability of the methylene blue test for determination of cation exchange capacity of clay minerals related to ammonium acetate method

    NASA Astrophysics Data System (ADS)

    Milošević, Maja; Logar, Mihovil; Dojčinović, Biljana; Erić, Suzana

    2015-04-01

    Cation exchange capacity (CEC) represents one of the most important parameters of clay minerals which reflects their ability to exchange cations with liquid phases in near contact. Measurement of CEC is used for characterizing sample plasticity, adsorbing and swelling properties which later define their usage in industrial purposes. Several methods have been developed over the years for determination of layer charge, charge density, charge distribution, etc. and have been published in numerous papers (Czimerova et al., 2006; Yukselen and Kaya, 2008). The main goal of present study is comparison of suitability of more recent method - methylene blue test in regard to older method - ammonium acetate for determination of CEC. For this study, we selected one montmorillonite clay (Bogovina, Serbia) and two mainly kaolinite clays (Miličinica, Serbia). Chemicals used for CEC determinations were solution of methylene blue (MB)(14*10-6M/ml) and ammonium acetate (AA) solution (1M). The obtained results are showing generally lower values in case of MB method. The main difference is due to molecular aggregation of MB on the clay surface. AA method is highly sensitive to the presence of CaO. Release of Ca ion from the sample into the solution can limit the saturation of exchange sites by the ammonium ion. This is clearly visible in case of montmorillonite clay. Fe2+ and Mg ions are difficult to move by the ammonium ion because of their ion radius, but in case of MB molecule there is no such restriction in removing them from the exchange sites. MB solution, even in a low concentration (2*10-6M/ml), is showing preferable results in moving the ions from their positions which is already visible after adding a small quantity of solution (25cm3). Both MB-titration and MB-spot test yield similar results and are much simpler methods than AA and they also give other information such as specific surface area (external and internal) whereas AA method only provides information about

  7. Dye-adsorption capacity of high surface-area hydrogen titanate nanosheets processed via modified hydrothermal method.

    PubMed

    Padinhattayil, Hareesh; Augustine, Rimesh; Shukla, Satyajit

    2013-04-01

    High surface-area (380 m2 x g(-1)) hydrogen titanate nanosheets (HTNS) processed via the modified hydrothermal method have been utilized for the removal of methylene blue (MB) dye from an aqueous solution via the surface-adsorption process involving the electrostatic attraction mechanism. The HTNS have been characterized using the transmission electron microscope (TEM), selected-area electron diffraction (SAED), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) specific surface-area measurement techniques. The amount of MB dye adsorbed on the surface of HTNS at equilibrium (q(e)) has been examined as a function of contact time, initial dye-concentration, and initial solution-pH. Within the investigated range of initial solution-pH (2.5-11), the MB dye adsorption on the surface of HTNS has been observed to follow the pseudo-second-order kinetics with the dye-adsorption capacity of 119 mg x g(-1) at the initial solution-pH of - 10. The adsorption equilibrium follows the Langmuir isotherm within the initial solution-pH range of 2.5-10. However, in a highly basic solution (initial solution-pH -11), the adsorption equilibrium has been observed to follow the Langmuir, Freundlich, and Dubinin-Kaganer-Radushkevich (DKR) models in the different ranges of initial MB dye concentration. The mere dependence on the DKR model has not been observed within the investigated range of initial solution-pH. The differences in the dye-adsorption characteristics and capacity of HTNS, compared with those of hydrogen titanate nanotubes, have been attributed to the difference in their specific surface-area. Irrespective of the morphology, the maximum coverage of MB dye on the surface of hydrogen titanate has been noted to be the same (52%).

  8. Carbon dioxide absorber and regeneration assemblies useful for power plant flue gas

    DOEpatents

    Vimalchand, Pannalal; Liu, Guohai; Peng, Wan Wang

    2012-11-06

    Disclosed are apparatus and method to treat large amounts of flue gas from a pulverized coal combustion power plant. The flue gas is contacted with solid sorbents to selectively absorb CO.sub.2, which is then released as a nearly pure CO.sub.2 gas stream upon regeneration at higher temperature. The method is capable of handling the necessary sorbent circulation rates of tens of millions of lbs/hr to separate CO.sub.2 from a power plant's flue gas stream. Because pressurizing large amounts of flue gas is cost prohibitive, the method of this invention minimizes the overall pressure drop in the absorption section to less than 25 inches of water column. The internal circulation of sorbent within the absorber assembly in the proposed method not only minimizes temperature increases in the absorber to less than 25.degree. F., but also increases the CO.sub.2 concentration in the sorbent to near saturation levels. Saturating the sorbent with CO.sub.2 in the absorber section minimizes the heat energy needed for sorbent regeneration. The commercial embodiments of the proposed method can be optimized for sorbents with slower or faster absorption kinetics, low or high heat release rates, low or high saturation capacities and slower or faster regeneration kinetics.

  9. Metasurface Broadband Solar Absorber

    PubMed Central

    Azad, Abul K.; Kort-Kamp, Wilton J. M.; Sykora, Milan; Weisse-Bernstein, Nina R.; Luk, Ting S.; Taylor, Antoinette J.; Dalvit, Diego A. R.; Chen, Hou-Tong

    2016-01-01

    We demonstrate a broadband, polarization independent, wide-angle absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low absorptivity (emissivity) at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- and p-polarizations. We also investigate numerically the frequency-dependent field and current distributions to elucidate how the absorption occurs within the metasurface structure. PMID:26828999

  10. Metasurface Broadband Solar Absorber

    DOE PAGES

    Azad, Abul K.; Kort-Kamp, Wilton J. M.; Sykora, Milan; ...

    2016-02-01

    Here, we demonstrate a broadband, polarization independent, wide-angle absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low absorptivity (emissivity) at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Moreover, our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- and p-polarizations. We also investigate numerically the frequency-dependent field and current distributionsmore » to elucidate how the absorption occurs within the metasurface structure.« less

  11. Metasurface Broadband Solar Absorber

    SciTech Connect

    Azad, Abul K.; Kort-Kamp, Wilton J. M.; Sykora, Milan; Weisse-Bernstein, Nina R.; Luk, Ting S.; Taylor, Antoinette J.; Dalvit, Diego A. R.; Chen, Hou-Tong

    2016-02-01

    Here, we demonstrate a broadband, polarization independent, wide-angle absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low absorptivity (emissivity) at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Moreover, our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- and p-polarizations. We also investigate numerically the frequency-dependent field and current distributions to elucidate how the absorption occurs within the metasurface structure.

  12. Contribution to improving the meat water holding capacity test by the filter paper press method. A comparison of three methods for measuring areas.

    PubMed

    Zamorano, J; Gambaruto, M

    1997-05-01

    Tests of meat water holding capacity (WHC) by the filter paper press method in bovine muscles were assayed. Two rapid methods to evaluate the liquid impregnation areas on the filter paper were used in opposition to the classic planimetric method. A special "reticular filter paper" for direct measurement of spot areas was designed. Data from 1113 meat WHC tests of Longissimus dorsi, Semitendinosus, Semimembranosus, Biceps femoris and Adductor muscles were assayed. It was verified that the reticular method has a good precision with coefficient of variation, CV%, between 4.04 and 2.64% for meat 'M' and total 'T' areas, respectively. The accuracy of the reticular method was also very high, with R(2) = 99.54% for 'T' and 97.06% for 'M'. The caliper rule method showed an acceptable accuracy, with values R(2) = 98.05 and 90.76% for 'T' and 'M', respectively. Their precision, however was somewhat smaller than reticular measures, with CV% between 5.51 and 7.37% for 'T' and 'M', respectively.

  13. Ionized Absorbers in AGN

    NASA Technical Reports Server (NTRS)

    Mathur, S.

    1999-01-01

    As a part of this program, we observed three AGN:PKS2251 + 113, PG0043 = 039 and PLH909. Two objects show signatures of absorbtion in their UV spectra. Based on our earlier modeling of X-ray warm absorbents, we expected to observe X-ray observation in these objects. The third, PLH909, is known to have soft excess in EINSTEIN data. Attachment: "Exploratory ASCA observation of broad absorption line quasi-stellar objects".

  14. Apollo couch energy absorbers

    NASA Technical Reports Server (NTRS)

    Wesselski, C. J.; Drexel, R. E.

    1972-01-01

    Load attenuators for the Apollo spacecraft crew couch and its potential applications are described. Energy absorption is achieved through friction and cyclic deformation of material. In one concept, energy absorption is accomplished by rolling a compressed ring of metal between two surfaces. In another concept, energy is absorbed by forcing a plastically deformed washer along a rod. Among the design problems that had to be solved were material selection, fatigue life, ring slippage, lubrication, and friction loading.

  15. Durability of Polymeric Glazing and Absorber Materials

    SciTech Connect

    Jorgensen, G.; Terwilliger, K.; Bingham, C.; Milbourne, M.

    2005-01-01

    The Solar Heating and Lighting Program has set the goal of reducing the cost of solar water heating systems by at least 50%. An attractive approach to such large cost reduction is to replace glass and metal parts with less-expensive, lighter-weight, more-integrated polymeric components. The key challenge with polymers is to maintain performance and assure requisite durability for extended lifetimes. The objective of this task is to quantify lifetimes through measurement of the optical and mechanical stability of candidate polymeric glazing and absorber materials. Polycarbonate sheet glazings, as proposed by two industry partners, have been tested for resistance to UV radiation with three complementary methods. Incorporation of a specific 2-mil thick UV-absorbing screening layer results in glazing lifetimes of at least 15 years; improved screens promise even longer lifetimes. Proposed absorber materials were tested for creep and embrittlement under high temperature, and appear adequate for planned ICS absorbers.

  16. Radar Absorbing Materials for Cube Stealth Satellite

    NASA Astrophysics Data System (ADS)

    Micheli, D.; Pastore, R.; Vricella, A.; Marchetti, M.

    A Cube Stealth Satellite is proposed for potential applications in defense system. Particularly, the faces of the satellite exposed to the Earth are made of nanostructured materials able to absorb radar surveillance electromagnetic waves, conferring stealth capability to the cube satellite. Microwave absorbing and shielding material tiles are proposed using composite materials consisting in epoxy-resin and carbon nanotubes filler. The electric permittivity of the composite nanostructured materials is measured and discussed. Such data are used by the modeling algorithm to design the microwave absorbing and the shielding faces of the cube satellite. The electromagnetic modeling takes into account for several incidence angles (0-80°), extended frequency band (2-18 GHz), and for the minimization of the electromagnetic reflection coefficient. The evolutionary algorithm used for microwave layered microwave absorber modeling is the recently developed Winning Particle Optimization. The mathematical model of the absorbing structure is finally experimentally validated by comparing the electromagnetic simulation to the measurement of the manufactured radar absorber tile. Nanostructured composite materials manufacturing process and electromagnetic reflection measurements methods are described. Finally, a finite element method analysis of the electromagnetic scattering by cube stealth satellite is performed.

  17. Simple and Reliable Method to Quantify the Hepatitis B Viral Load and Replicative Capacity in Liver Tissue and Blood Leukocytes

    PubMed Central

    Minosse, Claudia; Coen, Sabrina; Visco Comandini, Ubaldo; Lionetti, Raffaella; Montalbano, Marzia; Cerilli, Stefano; Vincenti, Donatella; Baiocchini, Andrea; Capobianchi, Maria R.; Menzo, Stefano

    2016-01-01

    Background A functional cure of chronic hepatitis B (CHB) is feasible, but a clear view of the intrahepatic viral dynamics in each patient is needed. Intrahepatic covalently closed circular DNA (cccDNA) is the stable form of the viral genome in infected cells, and represents the ideal marker of parenchymal colonization. Its relationships with easily accessible peripheral parameters need to be elucidated in order to avoid invasive procedures in patients. Objectives The goal of this study was to design, set up, and validate a reliable and straightforward method for the quantification of the cccDNA and total DNA of the hepatitis B virus (HBV) in a variety of clinical samples. Patients and Methods Clinical samples from a cohort of CHB patients, including liver biopsies in some, were collected for the analysis of intracellular HBV molecular markers using novel molecular assays. Results A plasmid construct, including sequences from the HBV genome and from the human gene hTERT, was generated as an isomolar multi-standard for HBV quantitation and normalization to the cellular contents. The specificity of the real-time assay for the cccDNA was assessed using Dane particles isolated on a density gradient. A comparison of liver tissue from 6 untreated and 6 treated patients showed that the treatment deeply reduced the replicative capacity (total DNA/cccDNA), but had limited impact on the parenchymal colonization. The peripheral blood mononuclear cells (PBMCs) and granulocytes from the treated and untreated patients were also analyzed. Conclusions A straightforward method for the quantification of intracellular HBV molecular parameters in clinical samples was developed and validated. The widespread use of such versatile assays could better define the prognosis of CHB, and allow a more rational approach to time-limited tailored treatment strategies. PMID:27882060

  18. Quality parameters, bioactive compounds and their correlation with antioxidant capacity of commercial fruit-based baby foods.

    PubMed

    Carbonell-Capella, Juana M; Barba, Francisco J; Esteve, María J; Frígola, Ana

    2014-10-01

    Comprehensive research is required to achieve the optimization of the antioxidant protection through baby foods, in particular, the commercially available fruit-based baby foods. This study investigated the physicochemical properties, ascorbic acid (AA), total carotenoids (TC), total phenolic content (TPC), trolox equivalent antioxidant capacity (TEAC) and oxygen radical absorbance capacity (ORAC) of 23 different commercially available fruit-based baby foods. The main contribution to the total antioxidant capacity (trolox equivalent antioxidant capacity and oxygen radical absorbance capacity) was provided by ascorbic acid, followed by phenolic compounds, in accordance with a mathematical equation obtained from the data: TEAC = 245.906 + 7.727 × (AA) + 1.988 × (TPC) - 0.008 × (TC) and ORAC = 318.662 + 2.775 × (AA) - 0.531 × (TPC) - 0.073 × (TC). Moreover, a positive correlation (r = 0.346, p < 0.05) was found for oxygen radical absorbance capacity and trolox equivalent antioxidant capacity methods. Baby foods with different kind of fruits used as ingredients showed higher antioxidant capacity. Among the commercial baby foods analysed in this work, that treated by gentle steam cooking process had high levels of bioactive compounds and antioxidant capacity.

  19. A Comparative Analysis on Assessment of Land Carrying Capacity with Ecological Footprint Analysis and Index System Method.

    PubMed

    Qian, Yao; Tang, Lina; Qiu, Quanyi; Xu, Tong; Liao, Jiangfu

    2015-01-01

    Land carrying capacity (LCC) explains whether the local land resources are effectively used to support economic activities and/or human population. LCC can be evaluated commonly with two approaches, namely ecological footprint analysis (EFA) and the index system method (ISM). EFA is helpful to investigate the effects of different land categories whereas ISM can be used to evaluate the contributions of social, environmental, and economic factors. Here we compared the two LCC-evaluation approaches with data collected from Xiamen City, a typical region where rapid economic growth and urbanization are found in China. The results show that LCC assessments with EFA and ISM not only complement each other but also are mutually supportive. Both assessments suggest that decreases in arable land and increasingly high energy consumption have major negative effects on LCC and threaten sustainable development for Xiamen City. It is important for the local policy makers, planners and designers to reduce ecological deficits by controlling fossil energy consumption, protecting arable land and forest land from converting into other land types, and slowing down the speed of urbanization, and to promote sustainability by controlling rural-to-urban immigration, increasing hazard-free treatment rate of household garbage, and raising energy consumption per unit industrial added value. Although EFA seems more appropriate for estimating LCC for a resource-output or self-sufficient region and ISM is more suitable for a resource-input region, both approaches should be employed when perform LCC assessment in any places around the world.

  20. A Comparative Analysis on Assessment of Land Carrying Capacity with Ecological Footprint Analysis and Index System Method

    PubMed Central

    Qian, Yao; Tang, Lina; Qiu, Quanyi; Xu, Tong; Liao, Jiangfu

    2015-01-01

    Land carrying capacity (LCC) explains whether the local land resources are effectively used to support economic activities and/or human population. LCC can be evaluated commonly with two approaches, namely ecological footprint analysis (EFA) and the index system method (ISM). EFA is helpful to investigate the effects of different land categories whereas ISM can be used to evaluate the contributions of social, environmental, and economic factors. Here we compared the two LCC-evaluation approaches with data collected from Xiamen City, a typical region where rapid economic growth and urbanization are found in China. The results show that LCC assessments with EFA and ISM not only complement each other but also are mutually supportive. Both assessments suggest that decreases in arable land and increasingly high energy consumption have major negative effects on LCC and threaten sustainable development for Xiamen City. It is important for the local policy makers, planners and designers to reduce ecological deficits by controlling fossil energy consumption, protecting arable land and forest land from converting into other land types, and slowing down the speed of urbanization, and to promote sustainability by controlling rural-to-urban immigration, increasing hazard-free treatment rate of household garbage, and raising energy consumption per unit industrial added value. Although EFA seems more appropriate for estimating LCC for a resource-output or self-sufficient region and ISM is more suitable for a resource-input region, both approaches should be employed when perform LCC assessment in any places around the world. PMID:26121142

  1. Method of fabricating electrodes including high-capacity, binder-free anodes for lithium-ion batteries

    DOEpatents

    Ban, Chunmei; Wu, Zhuangchun; Dillon, Anne C.

    2017-01-10

    An electrode (110) is provided that may be used in an electrochemical device (100) such as an energy storage/discharge device, e.g., a lithium-ion battery, or an electrochromic device, e.g., a smart window. Hydrothermal techniques and vacuum filtration methods were applied to fabricate the electrode (110). The electrode (110) includes an active portion (140) that is made up of electrochemically active nanoparticles, with one embodiment utilizing 3d-transition metal oxides to provide the electrochemical capacity of the electrode (110). The active material (140) may include other electrochemical materials, such as silicon, tin, lithium manganese oxide, and lithium iron phosphate. The electrode (110) also includes a matrix or net (170) of electrically conductive nanomaterial that acts to connect and/or bind the active nanoparticles (140) such that no binder material is required in the electrode (110), which allows more active materials (140) to be included to improve energy density and other desirable characteristics of the electrode. The matrix material (170) may take the form of carbon nanotubes, such as single-wall, double-wall, and/or multi-wall nanotubes, and be provided as about 2 to 30 percent weight of the electrode (110) with the rest being the active material (140).

  2. Heaving buoys, point absorbers and arrays.

    PubMed

    Falnes, Johannes; Hals, Jørgen

    2012-01-28

    Absorption of wave energy may be considered as a phenomenon of interference between incident and radiated waves generated by an oscillating object; a wave-energy converter (WEC) that displaces water. If a WEC is very small in comparison with one wavelength, it is classified as a point absorber (PA); otherwise, as a 'quasi-point absorber'. The latter may be a dipole-mode radiator, for instance an immersed body oscillating in the surge mode or pitch mode, while a PA is so small that it should preferably be a source-mode radiator, for instance a heaving semi-submerged buoy. The power take-off capacity, the WEC's maximum swept volume and preferably also its full physical volume should be reasonably matched to the wave climate. To discuss this matter, two different upper bounds for absorbed power are applied in a 'Budal diagram'. It appears that, for a single WEC unit, a power capacity of only about 0.3 MW matches well to a typical offshore wave climate, and the full physical volume has, unfortunately, to be significantly larger than the swept volume, unless phase control is used. An example of a phase-controlled PA is presented. For a sizeable wave-power plant, an array consisting of hundreds, or even thousands, of mass-produced WEC units is required.

  3. Solar radiation absorbing material

    DOEpatents

    Googin, John M.; Schmitt, Charles R.; Schreyer, James M.; Whitehead, Harlan D.

    1977-01-01

    Solar energy absorbing means in solar collectors are provided by a solar selective carbon surface. A solar selective carbon surface is a microporous carbon surface having pores within the range of 0.2 to 2 micrometers. Such a surface is provided in a microporous carbon article by controlling the pore size. A thermally conductive substrate is provided with a solar selective surface by adhering an array of carbon particles in a suitable binder to the substrate, a majority of said particles having diameters within the range of about 0.2-10 microns.

  4. Thermal conversion of an Fe3O4@metal-organic framework: a new method for an efficient Fe-Co/nanoporous carbon microwave absorbing material

    NASA Astrophysics Data System (ADS)

    Zhang, Xingmiao; Ji, Guangbin; Liu, Wei; Quan, Bin; Liang, Xiaohui; Shang, Chaomei; Cheng, Yan; Du, Youwei

    2015-07-01

    A novel FeCo nanoparticle embedded nanoporous carbon composite (Fe-Co/NPC) was synthesized via in situ carbonization of dehydro-ascorbic acid (DHAA) coated Fe3O4 nanoparticles encapsulated in a metal-organic framework (zeolitic imidazolate framework-67, ZIF-67). The molar ratio of Fe/Co significantly depends on the encapsulated content of Fe3O4 in ZIF-67. The composites filled with 50 wt% of the Fe-Co/NPC-2.0 samples in paraffin show a maximum reflection loss (RL) of -21.7 dB at a thickness of 1.2 mm; in addition, a broad absorption bandwidth for RL < -10 dB which covers from 12.2 to 18 GHz can be obtained, and its minimum reflection loss and bandwidth (RL values exceeding -10 dB) are far greater than those of commercial carbonyl iron powder under a very low thickness (1-1.5 mm). This study not only provides a good reference for future preparation of carbon-based lightweight microwave absorbing materials but also broadens the application of such kinds of metal-organic frameworks.A novel FeCo nanoparticle embedded nanoporous carbon composite (Fe-Co/NPC) was synthesized via in situ carbonization of dehydro-ascorbic acid (DHAA) coated Fe3O4 nanoparticles encapsulated in a metal-organic framework (zeolitic imidazolate framework-67, ZIF-67). The molar ratio of Fe/Co significantly depends on the encapsulated content of Fe3O4 in ZIF-67. The composites filled with 50 wt% of the Fe-Co/NPC-2.0 samples in paraffin show a maximum reflection loss (RL) of -21.7 dB at a thickness of 1.2 mm; in addition, a broad absorption bandwidth for RL < -10 dB which covers from 12.2 to 18 GHz can be obtained, and its minimum reflection loss and bandwidth (RL values exceeding -10 dB) are far greater than those of commercial carbonyl iron powder under a very low thickness (1-1.5 mm). This study not only provides a good reference for future preparation of carbon-based lightweight microwave absorbing materials but also broadens the application of such kinds of metal-organic frameworks. Electronic

  5. Composite neutron absorbing coatings for nuclear criticality control

    DOEpatents

    Wright, Richard N.; Swank, W. David; Mizia, Ronald E.

    2005-07-19

    Thermal neutron absorbing composite coating materials and methods of applying such coating materials to spent nuclear fuel storage systems are provided. A composite neutron absorbing coating applied to a substrate surface includes a neutron absorbing layer overlying at least a portion of the substrate surface, and a corrosion resistant top coat layer overlying at least a portion of the neutron absorbing layer. An optional bond coat layer can be formed on the substrate surface prior to forming the neutron absorbing layer. The neutron absorbing layer can include a neutron absorbing material, such as gadolinium oxide or gadolinium phosphate, dispersed in a metal alloy matrix. The coating layers may be formed by a plasma spray process or a high velocity oxygen fuel process.

  6. Absorber Alignment Measurement Tool for Solar Parabolic Trough Collectors: Preprint

    SciTech Connect

    Stynes, J. K.; Ihas, B.

    2012-04-01

    As we pursue efforts to lower the capital and installation costs of parabolic trough solar collectors, it is essential to maintain high optical performance. While there are many optical tools available to measure the reflector slope errors of parabolic trough solar collectors, there are few tools to measure the absorber alignment. A new method is presented here to measure the absorber alignment in two dimensions to within 0.5 cm. The absorber alignment is measured using a digital camera and four photogrammetric targets. Physical contact with the receiver absorber or glass is not necessary. The alignment of the absorber is measured along its full length so that sagging of the absorber can be quantified with this technique. The resulting absorber alignment measurement provides critical information required to accurately determine the intercept factor of a collector.

  7. Liquid Cryogen Absorber for MICE

    SciTech Connect

    Baynham, D.E.; Bish, P.; Bradshaw, T.W.; Cummings, M.A.; Green,M.A.; Ishimoto, S.; Ivaniouchenkov, I.; Lau, W.; Yang, S.Q.; Zisman, M.S.

    2005-08-20

    The Muon Ionization Cooling Experiment (MICE) will test ionization cooling of muons. In order to have effective ionization cooling, one must use an absorber that is made from a low-z material. The most effective low z materials for ionization cooling are hydrogen, helium, lithium hydride, lithium and beryllium, in that order. In order to measure the effect of material on cooling, several absorber materials must be used. This report describes a liquid-hydrogen absorber that is within a pair of superconducting focusing solenoids. The absorber must also be suitable for use with liquid helium. The following absorber components are discussed in this report; the absorber body, its heat exchanger, the hydrogen system, and the hydrogen safety. Absorber cooling and the thin windows are not discussed here.

  8. Infrared bolometers with silicon nitride micromesh absorbers

    NASA Technical Reports Server (NTRS)

    Bock, J. J.; Turner, A. D.; DelCastillo, H. M.; Beeman, J. W.; Lange, A. E.; Mauskopf, P. D.

    1996-01-01

    Sensitive far infrared and millimeter wave bolometers fabricated from a freestanding membrane of low stress silicon nitride are reported. The absorber, consisting of a metallized silicon nitride micromesh thermally isolated by radial legs of silicon nitride, is placed in an integrating cavity to efficiently couple to single mode or multiple mode infrared radiation. This structure provides low heat capacity, low thermal conduction and minimal cross section to energetic particles. A neutron transmutation doped Ge thermister is bump bonded to the center of the device and read out with evaporated Cr-Au leads. The limiting performance of the micromesh absorber is discussed and the recent results obtained from a 300 mK cold stage are summarized.

  9. A method for determining the unitary functional capacity of cloned channels and transporters expressed in Xenopus laevis oocytes.

    PubMed

    Zampighi, G A; Kreman, M; Boorer, K J; Loo, D D; Bezanilla, F; Chandy, G; Hall, J E; Wright, E M

    1995-11-01

    The Xenopus laevis oocyte is widely used to express exogenous channels and transporters and is well suited for functional measurements including currents, electrolyte and nonelectrolyte fluxes, water permeability and even enzymatic activity. It is difficult, however, to transform functional measurements recorded in whole oocytes into the capacity of a single channel or transporter because their number often cannot be estimated accurately. We describe here a method of estimating the number of exogenously expressed channels and transporters inserted in the plasma membrane of oocytes. The method is based on the facts that the P (protoplasmic) face in water-injected control oocytes exhibit an extremely low density of endogenous particles (212 +/- 48 particles/microns2, mean, SD) and that exogenously expressed channels and transporters increased the density of particles (up to 5,000/microns2) only on the P face. The utility and generality of the method were demonstrated by estimating the "gating charge" per particle of the Na+/glucose cotransporter (SGLT1) and a nonconducting mutant of the Shaker K+ channel proteins, and the single molecule water permeability of CHIP (Channel-like In-tramembrane Protein) and MIP (Major Intrinsic Protein). We estimated a "gating charge" of approximately 3.5 electronic charges for SGLT1 and approximately 9 for the mutant Shaker K+ channel from the ratio of Qmax to density of particles measured on the same oocytes. The "gating charges" were 3-fold larger than the "effective valences" calculated by fitting a Boltzmann equation to the same charge transfer data suggesting that the charge movement in the channel and cotransporter occur in several steps. Single molecule water permeabilities (pfs) of 1.4 x 10(-14) cm3/sec for CHIP and of 1.5 x 10(-16) cm3/sec for MIP were estimated from the ratio of the whole-oocyte water permeability (Pf) to the density of particles. Therefore, MIP is a water transporter in oocytes, albeit approximately 100

  10. Building Capacity of Occupational Therapy Practitioners to Address the Mental Health Needs of Children and Youth: A Mixed-Methods Study of Knowledge Translation

    PubMed Central

    Demirjian, Louise; LaGuardia, Teri; Thompson-Repas, Karen; Conway, Carol; Michaud, Paula

    2015-01-01

    PURPOSE. We explored the meaning and outcomes of a 6-mo building capacity process designed to promote knowledge translation of a public health approach to mental health among pediatric occupational therapy practitioners participating in a Community of Practice. METHOD. A one-group (N = 117) mixed-methods design using a pretest–posttest survey and qualitative analysis of written reflections was used to explore the meaning and outcomes of the building capacity process. RESULTS. Statistically significant improvements (p < .02) in pretest–posttest scores of knowledge, beliefs, and actions related to a public health approach to mental health were found. Qualitative findings suggest that participation resulted in a renewed commitment to addressing children’s mental health. CONCLUSION. The building capacity process expanded practitioner knowledge, renewed energy, and promoted confidence, resulting in change leaders empowered to articulate, advocate for, and implement practice changes reflecting occupational therapy’s role in addressing children’s mental health. PMID:26565099

  11. Ferroelectrics based absorbing layers

    NASA Astrophysics Data System (ADS)

    Hao, Jianping; Sadaune, Véronique; Burgnies, Ludovic; Lippens, Didier

    2014-07-01

    We show that ferroelectrics-based periodic structure made of BaSrTiO3 (BST) cubes, arrayed onto a metal plate with a thin dielectric spacer film exhibit a dramatic enhancement of absorbance with value close to unity. The enhancement is found around the Mie magnetic resonance of the Ferroelectrics cubes with the backside metal layer stopping any transmitted waves. It also involves quasi-perfect impedance matching resulting in reflection suppression via simultaneous magnetic and electrical activities. In addition, it was shown numerically the existence of a periodicity optimum, which is explained from surface waves analysis along with trade-off between the resonance damping and the intrinsic loss of ferroelectrics cubes. An experimental verification in a hollow waveguide configuration with a good comparison with full-wave numerical modelling is at last reported by measuring the scattering parameters of single and dual BST cubes schemes pointing out coupling effects for densely packed structures.

  12. Dual broadband metamaterial absorber.

    PubMed

    Kim, Young Ju; Yoo, Young Joon; Kim, Ki Won; Rhee, Joo Yull; Kim, Yong Hwan; Lee, YoungPak

    2015-02-23

    We propose polarization-independent and dual-broadband metamaterial absorbers at microwave frequencies. This is a periodic meta-atom array consisting of metal-dielectric-multilayer truncated cones. We demonstrate not only one broadband absorption from the fundamental magnetic resonances but additional broadband absorption in high-frequency range using the third-harmonic resonance, by both simulation and experiment. In simulation, the absorption was over 90% in 3.93-6.05 GHz, and 11.64-14.55 GHz. The corresponding experimental absorption bands over 90% were 3.88-6.08 GHz, 9.95-10.46 GHz and 11.86-13.84 GHz, respectively. The origin of absorption bands was elucidated. Furthermore, it is independent of polarization angle owing to the multilayered circular structures. The design is scalable to smaller size for the infrared and the visible ranges.

  13. THz-metamaterial absorbers

    NASA Astrophysics Data System (ADS)

    Tuong Pham, Van; Park, J. W.; Vu, Dinh Lam; Zheng, H. Y.; Rhee, J. Y.; Kim, K. W.; Lee, Y. P.

    2013-03-01

    An ultrabroad-band metamaterial absorber was investigated in mid-IR regime based on a similar model in previous work. The high absorption of metamaterial was obtained in a band of 8-11.7 THz with energy loss distributed in SiO2, which is appropriate potentially for solar-cell applications. A perfect absorption peak was provided by using a sandwich structure with periodical anti-dot pattern in the IR region, getting closed to visible-band metamaterials. The dimensional parameters were examined for the corresponding fabrication. Invited talk at the 6th International Workshop on Advanced Materials Science and Nanotechnology, 30 October-2 November, 2012, Ha Long, Vietnam.

  14. Establishment of a Method for Measuring Antioxidant Capacity in Urine, Based on Oxidation Reduction Potential and Redox Couple I2/KI

    PubMed Central

    Cao, Tinghui; He, Min; Bai, Tianyu

    2016-01-01

    Objectives. To establish a new method for determination of antioxidant capacity of human urine based on the redox couple I2/KI and to evaluate the redox status of healthy and diseased individuals. Methods. The method was based on the linear relationship between oxidation reduction potential (ORP) and logarithm of concentration ratio of I2/KI. ORP of a solution with a known concentration ratio of I2/KI will change when reacted with urine. To determine the accuracy of the method, both vitamin C and urine were reacted separately with I2/KI solution. The new method was compared with the traditional method of iodine titration and then used to measure the antioxidant capacity of urine samples from 30 diabetic patients and 30 healthy subjects. Results. A linear relationship was found between logarithm of concentration ratio of I2/KI and ORP (R2 = 0.998). Both vitamin C and urine concentration showed a linear relationship with ORP (R2 = 0.994 and 0.986, resp.). The precision of the method was in the acceptable range and results of two methods had a linear correlation (R2 = 0.987). Differences in ORP values between diabetic group and control group were statistically significant (P < 0.05). Conclusions. A new method for measuring the antioxidant capacity of clinical urine has been established. PMID:28115919

  15. Advanced Methods for Incorporating Solar Energy Technologies into Electric Sector Capacity-Expansion Models: Literature Review and Analysis

    SciTech Connect

    Sullivan, P.; Eurek, K.; Margolis, R.

    2014-07-01

    Because solar power is a rapidly growing component of the electricity system, robust representations of solar technologies should be included in capacity-expansion models. This is a challenge because modeling the electricity system--and, in particular, modeling solar integration within that system--is a complex endeavor. This report highlights the major challenges of incorporating solar technologies into capacity-expansion models and shows examples of how specific models address those challenges. These challenges include modeling non-dispatchable technologies, determining which solar technologies to model, choosing a spatial resolution, incorporating a solar resource assessment, and accounting for solar generation variability and uncertainty.

  16. Electrochemically regenerable carbon dioxide absorber

    NASA Technical Reports Server (NTRS)

    Woods, R. R.; Marshall, R. D.; Schubert, F. H.; Heppner, D. B.

    1979-01-01

    Preliminary designs were generated for two electrochemically regenerable carbon dioxide absorber concepts. Initially, an electrochemically regenerable absorption bed concept was designed. This concept incorporated the required electrochemical regeneration components in the absorber design, permitting the absorbent to be regenerated within the absorption bed. This hardware was identified as the electrochemical absorber hardware. The second hardware concept separated the functional components of the regeneration and absorption process. This design approach minimized the extravehicular activity component volume by eliminating regeneration hardware components within the absorber. The electrochemical absorber hardware was extensively characterized for major operating parameters such as inlet carbon dioxide partial pressure, process air flow rate, operational pressure, inlet relative humidity, regeneration current density and absorption/regeneration cycle endurance testing.

  17. Liquid Hydrogen Absorber for MICE

    SciTech Connect

    Ishimoto, S.; Suzuki, S.; Yoshida, M.; Green, Michael A.; Kuno, Y.; Lau, Wing

    2010-05-30

    Liquid hydrogen absorbers for the Muon Ionization Cooling Experiment (MICE) have been developed, and the first absorber has been tested at KEK. In the preliminary test at KEK we have successfully filled the absorber with {approx}2 liters of liquid hydrogen. The measured hydrogen condensation speed was 2.5 liters/day at 1.0 bar. No hydrogen leakage to vacuum was found between 300 K and 20 K. The MICE experiment includes three AFC (absorber focusing coil) modules, each containing a 21 liter liquid hydrogen absorber made of aluminum. The AFC module has safety windows to separate its vacuum from that of neighboring modules. Liquid hydrogen is supplied from a cryocooler with cooling power 1.5 W at 4.2 K. The first absorber will be assembled in the AFC module and installed in MICE at RAL.

  18. Cyclodextrins: a new efficient absorbent to treat waste gas streams.

    PubMed

    Blach, Philippe; Fourmentin, Sophie; Landy, David; Cazier, Fabrice; Surpateanu, Gheorghe

    2008-01-01

    Volatile Organic Compounds (VOCs) in the air provoke health and environmental concerns. This paper focuses on the absorption method to treat industrial polluted air loaded with VOCs. The key variable of this treatment being the choice of a suitable liquid absorbent, the aim of this research work is to investigate the effectiveness and the regeneration of a new potential family of absorbent: cyclodextrins (CDs). All CDs derivatives tested are able to decrease the Henry's law constant of toluene: a reduction of volatility up to 95% may be obtained, depending on CD nature and concentration. Moreover, absorption experiments show that beta-CD, which presents the highest absorption ability, is 250 time more efficient than water. The absorption efficiency is not totally correlated with static experiments, suggesting that, in addition to Henry's law constants and inclusion compounds stability, toluene diffusion into such solutions has to be taken into account. It is also to be noted that salt and pH variations seem to have little influence on the absorption capacity of CDs, which may be of great interest for industrial applications. Finally, since production of solid compounds was not observed during these experiments and since temperature decreases the capture ability in a drastic way, regeneration of the washing solution can be achieved by heating the solution in combination with air stripping.

  19. Antioxidant and antiradical capacities in apricot (Prunus armeniaca L.) fruits: variations from genotypes, years, and analytical methods.

    PubMed

    Hegedus, Attila; Engel, Rita; Abrankó, László; Balogh, Emoke; Blázovics, Anna; Hermán, Rita; Halász, Júlia; Ercisli, Sezai; Pedryc, Andrzej; Stefanovits-Bányai, Éva

    2010-01-01

    The fruit quality parameters and antioxidant capacity (ferric reducing antioxidant power, FRAP) and total phenolic content (TPC) were determined in 27 apricot cultivars and hybrids of diverse origins. Twenty one- to 35-fold variations were measured among FRAP and TPC values. Besides genotype, harvest year also contributed significantly (P≤0.05) to the variations of TPC presumably due to the climatic differences between years. A subset of genotypes (15) was also analyzed for their antiradical activities (2,2'-diphenyl-1-picrylhydrazyl, DPPH; total radical-scavenging activity, TRSA; water-soluble antioxidant capacity, ACW; and lipid-soluble antioxidant capacity, ACL), and vitamin C contents as well as color indices (CIE H°, L*, and chroma). The hybrid "Preventa" had outstanding FRAP (>10.4 mmol ascorbic acid/L), DPPH (74.45%), TRSA (0.002%), ACW (33587.5 nmol AA/L) and ACL (78.65 nmol Trolox/L), TPC (>2890.0 mg gallic acid/L), and vitamin C (16.17 mg/100 g FW) levels and an average carotenoid content estimated from the hue angle (66.99°). Most antioxidant and antiradical activities correlated significantly except for TRSA; the closest correlation was observed between FRAP and ACW (r=0.952). Only TRSA showed significant correlations with color indices, H° and chroma, suggesting TRSA measures at least a fraction of the antioxidant capacity attributable to apricot carotenoids.

  20. Water absorbency by wool fibers: Hofmeister effect.

    PubMed

    Lo Nostro, Pierandrea; Fratoni, Laura; Ninham, Barry W; Baglioni, Piero

    2002-01-01

    Wool is a complex material, composed of cuticle and epicuticle cells, surrounded by a cell membrane complex. Wool fibers absorb moisture from air, and, once immersed in water, they take up considerable amounts of liquid. The water absorbency parameter can be determined from weight gain, according to a standard method, and used to quantify this phenomenon. In this paper we report a study on the water absorbency (or retention) of untreated wool fibers in the presence of aqueous 1 M salt solutions at 29 degrees C and a relative humidity of either 33% or 56%. The effect of anions was determined by selecting a wide range of different sodium salts, while the effect of cations was checked through some chlorides and nitrates. Our results show a significant specific ion and ion pair "Hofmeister" effects, that change the amount of water absorbed by the fibers. To understand this phenomenon, the water absorbency parameter (A(w)) is compared to different physicochemical parameters such as the lyotropic number, free energy of hydration of ions, molar surface tension increment, polarizability, refractive index increment, and molar refractivity. The data indicate that this Hofmeister phenomenon is controlled by dispersion forces that depend on the polarizability of ionic species, their adsorption frequencies, the solvent, and the substrate. These dispersion forces dominate the behavior in concentrated solutions. They are in accord with new developing theories of solutions and molecular interactions in colloidal systems that account for Hofmeister effects.

  1. Moving core beam energy absorber and converter

    DOEpatents

    Degtiarenko, Pavel V.

    2012-12-18

    A method and apparatus for the prevention of overheating of laser or particle beam impact zones through the use of a moving-in-the-coolant-flow arrangement for the energy absorbing core of the device. Moving of the core spreads the energy deposition in it in 1, 2, or 3 dimensions, thus increasing the effective cooling area of the device.

  2. Selective Pyroelectric Detection of Millimetre Waves Using Ultra-Thin Metasurface Absorbers

    PubMed Central

    Kuznetsov, Sergei A.; Paulish, Andrey G.; Navarro-Cía, Miguel; Arzhannikov, Andrey V.

    2016-01-01

    Sensing infrared radiation is done inexpensively with pyroelectric detectors that generate a temporary voltage when they are heated by the incident infrared radiation. Unfortunately the performance of these detectors deteriorates for longer wavelengths, leaving the detection of, for instance, millimetre-wave radiation to expensive approaches. We propose here a simple and effective method to enhance pyroelectric detection of the millimetre-wave radiation by combining a compact commercial infrared pyro-sensor with a metasurface-enabled ultra-thin absorber, which provides spectrally- and polarization-discriminated response and is 136 times thinner than the operating wavelength. It is demonstrated that, due to the small thickness and therefore the thermal capacity of the absorber, the detector keeps the high response speed and sensitivity to millimetre waves as the original infrared pyro-sensor does against the regime of infrared detection. An in-depth electromagnetic analysis of the ultra-thin resonant absorbers along with their complex characterization by a BWO-spectroscopy technique is presented. Built upon this initial study, integrated metasurface absorber pyroelectric sensors are implemented and tested experimentally, showing high sensitivity and very fast response to millimetre-wave radiation. The proposed approach paves the way for creating highly-efficient inexpensive compact sensors for spectro-polarimetric applications in the millimetre-wave and terahertz bands. PMID:26879250

  3. Selective Pyroelectric Detection of Millimetre Waves Using Ultra-Thin Metasurface Absorbers

    NASA Astrophysics Data System (ADS)

    Kuznetsov, Sergei A.; Paulish, Andrey G.; Navarro-Cía, Miguel; Arzhannikov, Andrey V.

    2016-02-01

    Sensing infrared radiation is done inexpensively with pyroelectric detectors that generate a temporary voltage when they are heated by the incident infrared radiation. Unfortunately the performance of these detectors deteriorates for longer wavelengths, leaving the detection of, for instance, millimetre-wave radiation to expensive approaches. We propose here a simple and effective method to enhance pyroelectric detection of the millimetre-wave radiation by combining a compact commercial infrared pyro-sensor with a metasurface-enabled ultra-thin absorber, which provides spectrally- and polarization-discriminated response and is 136 times thinner than the operating wavelength. It is demonstrated that, due to the small thickness and therefore the thermal capacity of the absorber, the detector keeps the high response speed and sensitivity to millimetre waves as the original infrared pyro-sensor does against the regime of infrared detection. An in-depth electromagnetic analysis of the ultra-thin resonant absorbers along with their complex characterization by a BWO-spectroscopy technique is presented. Built upon this initial study, integrated metasurface absorber pyroelectric sensors are implemented and tested experimentally, showing high sensitivity and very fast response to millimetre-wave radiation. The proposed approach paves the way for creating highly-efficient inexpensive compact sensors for spectro-polarimetric applications in the millimetre-wave and terahertz bands.

  4. Food-processes wastewaters treatment using food solid-waste materials as adsorbents or absorbents

    NASA Astrophysics Data System (ADS)

    Rapti, Ilaira; Georgopoulos, Stavros; Antonopoulou, Maria; Konstantinou, Ioannis; Papadaki, Maria

    2016-04-01

    The wastewaters generated by olive-mills during the production of olive oil, wastewaters from a dairy and a cow-farm unit and wastewaters from a small food factory have been treated by means of selected materials, either by-products of the same units, or other solid waste, as absorbents or adsorbents in order to identify the capacity of those materials to remove organic load and toxicity from the aforementioned wastewaters. The potential of both the materials used as absorbents as well as the treated wastewaters to be further used either as fertilizers or for agricultural irrigation purposes are examined. Dry olive leaves, sheep wool, rice husks, etc. were used either in a fixed-bed or in a stirred batch arrangemen,t employing different initial concentrations of the aforementioned wastewaters. The efficiency of removal was assessed using scpectrophotometric methods and allium test phytotoxicity measurements. In this presentation the response of each material employed is shown as a function of absorbent/adsorbent quantity and kind, treatment time and wastewater kind and initial organic load. Preliminary results on the potential uses of the adsorbents/absorbents and the treated wastewaters are also shown. Keywords: Olive-mill wastewaters, dairy farm wastewaters, olive leaves, zeolite, sheep wool

  5. Energy absorber for the CETA

    NASA Technical Reports Server (NTRS)

    Wesselski, Clarence J.

    1994-01-01

    The energy absorber that was developed for the CETA (Crew Equipment and Translation Aid) on Space Station Freedom is a metal on metal frictional type and has a load regulating feature that prevents excessive stroking loads from occurring while in operation. This paper highlights some of the design and operating aspects and the testing of this energy absorber.

  6. Improvement Of The Helmholtz Absorber

    NASA Technical Reports Server (NTRS)

    Morrow, Duane L.

    1992-01-01

    Helmholtz-resonator system improved to enable it to absorb sound at more than one frequency without appreciable loss of effectiveness at primary frequency. Addition of annular cavities enables absorption of sound at harmonic frequencies in addition to primary frequency. Improved absorber designed for use on structures of high transmission loss. Applied to such machines as fixed-speed engines and fans.

  7. Metal-shearing energy absorber

    NASA Technical Reports Server (NTRS)

    Fay, R. J.; Wittrock, E. P.

    1971-01-01

    Device, consisting of tongue of thin aluminum alloy strip, pull tab, slotted steel plate which serves as cutter, and steel buckle, absorbs mechanical energy when its ends are subjected to tensile loading. Device is applicable as auxiliary shock absorbing anchor for automobile and airplane safety belts.

  8. Optimal active vibration absorber: Design and experimental results

    NASA Technical Reports Server (NTRS)

    Lee-Glauser, Gina; Juang, Jer-Nan; Sulla, Jeffrey L.

    1992-01-01

    An optimal active vibration absorber can provide guaranteed closed-loop stability and control for large flexible space structures with collocated sensors/actuators. The active vibration absorber is a second-order dynamic system which is designed to suppress any unwanted structural vibration. This can be designed with minimum knowledge of the controlled system. Two methods for optimizing the active vibration absorber parameters are illustrated: minimum resonant amplitude and frequency matched active controllers. The Controls-Structures Interaction Phase-1 Evolutionary Model at NASA LaRC is used to demonstrate the effectiveness of the active vibration absorber for vibration suppression. Performance is compared numerically and experimentally using acceleration feedback.

  9. Evaluation of antioxidant capacity of Chinese five-spice ingredients.

    PubMed

    Bi, Xinyan; Soong, Yean Yean; Lim, Siang Wee; Henry, Christiani Jeyakumar

    2015-05-01

    Phenolic compounds in spices were reportedly found to possess high antioxidant capacities (AOCs), which may prevent or reduce risk of human diseases such as cardiovascular disease, cancer and diabetes. The potential AOC of Chinese five-spice powder (consist of Szechuan pepper, fennel seed, cinnamon, star anise and clove) with varying proportion of individual spice ingredients was investigated through four standard methods. Our results suggest that clove is the major contributor to the AOC of the five-spice powder whereas the other four ingredients contribute to the flavour. For example, the total phenolic content as well as ferric reducing antioxidant power (FRAP), Trolox equivalent antioxidant capacity (TEAC) and oxygen radical absorbance capacity (ORAC) values increased linearly with the clove percentage in five-spice powder. This observation opens the door to use clove in other spice mixtures to increase their AOC and flavour. Moreover, linear relationships were also observed between AOC and the total phenolic content of the 32 tested spice samples.

  10. METHOD 415.3 - MEASUREMENT OF TOTAL ORGANIC CARBON, DISSOLVED ORGANIC CARBON AND SPECIFIC UV ABSORBANCE AT 254 NM IN SOURCE WATER AND DRINKING WATER

    EPA Science Inventory

    2.0 SUMMARY OF METHOD

    2.1 In both TOC and DOC determinations, organic carbon in the water sample is oxidized to form carbon dioxide (CO2), which is then measured by a detection system. There are two different approaches for the oxidation of organic carbon in water sample...

  11. Science on a Roll. Part One: Absorbing Inquiry.

    ERIC Educational Resources Information Center

    Brendzel, Sharon

    2002-01-01

    Presents an activity that tests the absorbency of different brands of paper towels. Suggests making this activity into an open-ended inquiry type of activity. Includes sample questions to guide students, topics for class discussion, and sample methods of using the absorbency activity. (KHR)

  12. Summary of Time Period-Based and Other Approximation Methods for Determining the Capacity Value of Wind and Solar in the United States: September 2010 - February 2012

    SciTech Connect

    Rogers, J.; Porter, K.

    2012-03-01

    This paper updates previous work that describes time period-based and other approximation methods for estimating the capacity value of wind power and extends it to include solar power. The paper summarizes various methods presented in utility integrated resource plans, regional transmission organization methodologies, regional stakeholder initiatives, regulatory proceedings, and academic and industry studies. Time period-based approximation methods typically measure the contribution of a wind or solar plant at the time of system peak - sometimes over a period of months or the average of multiple years.

  13. Development of a rapid method based on solid-phase extraction and liquid chromatography with ultraviolet absorbance detection for the determination of polyphenols in alcohol-free beers.

    PubMed

    García, A Alonso; Grande, B Cancho; Gándara, J Simal

    2004-10-29

    An analytical method based on solid-phase extraction (SPE) and followed by liquid chromatographic separation and ultraviolet detection (HPLC-UV) is proposed for the determination of 10 phenolic compounds which participate on beer stability and sensory properties in alcohol-free beers. Acetonitrile was found to be the most appropriate solvent for the elution of polyphenolic compounds adsorbed on C18 cartridges. The performance of the method was assessed by the evaluation of parameters such as absolute recovery (generally higher than 60%), repeatability (lower than 10%), linearity (r2 higher than 0.993) and limits of quantitation (ranging from 1 to 37 microg/L); no matrix effects were observed. The polyphenol content of different Spanish alcohol-free beers is presented. Five phenolic compounds such as protocatechuic, p-coumaric, ferulic, caffeic acids, and (+)-catechin were identified at levels lower than 10 mg/L.

  14. Prediction of heat of melting and heat capacity of inorganic liquids by the method of group contributions

    SciTech Connect

    Williams, J.D.; Eakman, J.M.; Montoya, M.M.

    1997-11-17

    Complex salts and salt/oxide combinations are being considered for the immobilization and storage or disposal of hazardous or radioactive wastes. There is very little information concerning such fundamental properties as heat of fusion and heat capacities for many of these inorganic materials. This work focuses on the use of elements or simple functional groups to estimate some of these fundamental thermodynamic properties for a variety of inorganic compounds. The major emphasis will be on properties for a variety of inorganic compounds. The major emphasis will be on properties for which some ancillary information may be easily measured, but which may be very difficult to measure directly. An example of such a property is the heat of fusion (or melting). The melting temperature for most pure materials is relatively easy to measure. However, the actual amount of energy required to liquefy, or conversely, the amount of energy which must be removed to solidify those same materials has not been measured. Similarly, important properties such as heat capacities of liquids are unavailable for many compounds. Such information is essential in the chemical industry and are paramount for chemical engineers if they are to design, build and operate plants and facilities in an economical and efficient manner.

  15. Experienced consent in geriatrics research: a new method to optimize the capacity to consent in frail elderly subjects.

    PubMed Central

    Rikkert, M G; van den Bercken, J H; ten Have, H A; Hoefnagels, W H

    1997-01-01

    OBJECTIVES: Cognitive and sensory difficulties frequently jeopardize informed consent of frail elderly patients This study is the first to test whether preliminary research experience could enhance geriatric patients' capacity to consent. DESIGN/SETTING: A step-wise consent procedure was introduced in a study on fluid balance in geriatric patients. Eligible patients providing verbal consent participated in a try-out of a week, during which bioelectrical impedance and weight measurements were performed daily. Afterwards, written informed consent was requested. Comprehension, risk and inconvenience scores (ranges: 0-10) were obtained before and after the try-out by asking ten questions about the study's essentials and by asking for a risk and inconvenience assessment on a ten-points rating scale. SUBJECTS AND RESULTS: Seventy of the 78 eligible subjects started the try-out and 53 (68%) provided written consent. The comprehension score increased from 5.0 (+/- 2.3) to 7.0 (+/- 1.9) following the try-out (P < 0.001). The number of subjects capable of weighing risks and inconveniences increased from 32 to 48 (P < 0.001). CONCLUSIONS: Research experience improved the capacity to consent, still enabling an acceptable participation rate. Therefore, experienced consent seems a promising tool to optimize informed consent in frail elderly subjects. PMID:9358345

  16. Absorbent product to absorb fluids. [for collection of human wastes

    NASA Technical Reports Server (NTRS)

    Dawn, F. S.; Correale, J. V. (Inventor)

    1982-01-01

    A multi-layer absorbent product for use in contact with the skin to absorb fluids is discussed. The product utilizes a water pervious facing layer for contacting the skin, overlayed by a first fibrous wicking layer, the wicking layer preferably being of the one-way variety in which fluid or liquid is moved away from the facing layer. The product further includes a first container section defined by inner and outer layer of a water pervious wicking material between which is disposed a first absorbent mass. A second container section defined by inner and outer layers between which is disposed a second absorbent mass and a liquid impermeable/gas permeable layer. Spacesuit applications are discussed.

  17. Effects of activated carbon characteristics on the electrosorption capacity of titanium dioxide/activated carbon composite electrode materials prepared by a microwave-assisted ionothermal synthesis method.

    PubMed

    Liu, Po-I; Chung, Li-Ching; Ho, Chia-Hua; Shao, Hsin; Liang, Teh-Ming; Horng, Ren-Yang; Chang, Min-Chao; Ma, Chen-Chi M

    2015-05-15

    Titanium dioxide (TiO2)/ activated carbon (AC) composite materials, as capacitive deionization electrodes, were prepared by a two-step microwave-assisted ionothermal synthesis method. The electrosorption capacity of the composite electrodes was studied and the effects of AC characteristics were explored. These effects were investigated by multiple analytical techniques, including X-ray photoelectron spectroscopy, thermogravimetry analysis and electrochemical impedance spectroscopy, etc. The experimental results indicated that the electrosorption capacity of the TiO2/AC composite electrode is dependent on the characteristics of AC including the pore structure and the surface property. An enhancement in electrosorption capacity was observed for the TiO2/AC composite electrode prepared from the AC with higher mesopore content and less hydrophilic surface. This enhancement is due to the deposition of anatase TiO2 with suitable amount of Ti-OH. On the other hand, a decline in electrosorption capacity was observed for the TiO2/AC composite electrode prepared from the AC with higher micropore content and highly hydrophilic surface. High content of hydrogen bond complex formed between the functional group on hydrophilic surface with H2O, which will slow down the TiO2 precursor-H2O reaction. In such situation, the effect of TiO2 becomes unfavorable as the loading amount of TiO2 is less and the micropore can also be blocked.

  18. An introduction to absorbent dressings.

    PubMed

    Jones, Menna Lloyd

    2014-12-01

    Exudate bathes the wound bed with a serous fluid that contains essential components that promote wound healing. However, excess exudate is often seen as a challenge for clinicians. Absorbent dressings are often used to aid in the management of exudate, with the aim of providing a moist but unmacerated environment. With so many different types of absorbent dressings available today-alongside making a holistic assessment-it is essential that clinicians also have the knowledge and skill to select the most appropriate absorbent dressing for a given patient.

  19. Self-Regulating Shock Absorber

    NASA Technical Reports Server (NTRS)

    Wesselski, Clarence J.

    1995-01-01

    Mechanical shock absorber keeps frictional damping force within tolerable limit. Its damping force does not increase with coefficient of friction between energy-absorbing components; rather, frictional damping force varies only slightly. Relatively insensitive to manufacturing variations and environmental conditions altering friction. Does not exhibit high breakaway friction and consequent sharp increase followed by sharp decrease in damping force at beginning of stroking. Damping force in absorber does not vary appreciably with speed of stroking. In addition, not vulnerable to leakage of hydraulic fluid.

  20. Poly(dimethylsiloxane) oil absorbent with a three-dimensionally interconnected porous structure and swellable skeleton.

    PubMed

    Zhang, Aijuan; Chen, Mingjie; Du, Can; Guo, Huizhang; Bai, Hua; Li, Lei

    2013-10-23

    Cleanup of oil spills is a worldwide challenge to prevent serious environmental pollution. A new kind of poly(dimethylsiloxane) (PDMS) oil absorbent with high absorption capacity and excellent reusability was prepared and used for oil/water separation. The preparation process of PDMS oil absorbents involves direct curing of a PDMS prepolymer in a p-xylene solution in the presence of commercial sugar particles, which is simple and economic. PDMS oil absorbents have interconnected pores and a swellable skeleton, combining the advantages of porous materials and gels. Absorption capacities of PDMS oil absorbents are 4-34 g/g for various oils and organic solvents, which are 3 times that reported previously. Owing to their hydrophobicity and oleophilicity, the as-obtained PDMS oil absorbents can selectively collect oils or organic solvents from water. The absorption process can be finished within tens of seconds. Furthermore, the absorbed oils or organic solvents can be recovered by compressing the oil absorbents, and after 20 absorbing/recovering cycles, PDMS oil absorbents show little loss of their absorption capacities and own weights.

  1. A chemometric-assisted method for the simultaneous determination of malachite green and crystal violet in water based on absorbance-pH data generated by a homemade pH gradient apparatus.

    PubMed

    Yu, Shuling; Yuan, Xuejie; Yang, Jing; Yuan, Jintao; Shi, Jiahua; Wang, Yali; Chen, Yuewen; Gao, Shufang

    2015-01-01

    An attractive method of generating second-order data was developed by a dropping technique to generate pH gradient simultaneously coupled with diode-array spectrophotometer scanning. A homemade apparatus designed for the pH gradient. The method and the homemade apparatus were used to simultaneously determine malachite green (MG) and crystal violet (CV) in water samples. The absorbance-pH second-order data of MG or CV were obtained from the spectra of MG or CV in a series of pH values of HCl-KCl solution. The second-order data of mixtures containing MG and CV that coexisted with interferents were analyzed using multidimensional partial least-squares with residual bilinearization. The method and homemade apparatus were used to simultaneously determine MG and CV in fish farming water samples and in river ones with satisfactory results. The presented method and the homemade apparatus could serve as an alternative tool to handle some analysis problems.

  2. Removal of 2,4-dinitrophenol using hybrid methods based on ultrasound at an operating capacity of 7 L.

    PubMed

    Bagal, Manisha V; Lele, Bhagyashree J; Gogate, Parag R

    2013-09-01

    Sonochemical removal of 2,4-dinitrophenol (DNP) has been investigated using ultrasonic bath, with an operating capacity of 7 L, fitted with a large transducer with longitudinal vibrations having a 1 kW rated power output and operating frequency of 25 kHz. It has been revealed from calorimetric studies that maximum power is dissipated at a capacity of 7 L. The concentration of DNP has been monitored with an objective of evaluation of the efficacy of ultrasonic reactor in combination with process intensifying approaches for the removal of DNP. The effect of operating pH and additives such as hydrogen peroxide and ferrous iron activated persulfate on the extent of removal of DNP has been investigated. It has been observed that the extent of removal is greater at lower pH (pH 2.5 and 4) than at higher pH (pH 10). The combined treatment strategies such as ultrasound (US)/Fenton, US/advanced Fenton and US/CuO/H2O2 have also been investigated with an objective of obtaining complete removal of DNP using hybrid treatment strategies. The extent of removal has been found to increase significantly in US/Fenton process (98.7%) as compared to that using US alone (5.8%) which demonstrates the efficacy of the combined process. First order kinetics has been fitted for all the approaches investigated in the work. Calculations of cavitational yield indicated the superiority of the reactor design as compared to the conventional ultrasonic horn type reactors. The main intermediates formed during the process of removal of DNP have been identified.

  3. Tunable metamaterial dual-band terahertz absorber

    NASA Astrophysics Data System (ADS)

    Luo, C. Y.; Li, Z. Z.; Guo, Z. H.; Yue, J.; Luo, Q.; Yao, G.; Ji, J.; Rao, Y. K.; Li, R. K.; Li, D.; Wang, H. X.; Yao, J. Q.; Ling, F. R.

    2015-11-01

    We report a design of a temperature controlled tunable dual band terahertz absorber. The compact single unit cell consists of two nested closed square ring resonators and a layer metallic separated by a substrate strontium titanate (STO) dielectric layer. It is found that the absorber has two distinctive absorption peaks at frequencies 0.096 THz and 0.137 THz, whose peaks are attained 97% and 75%. Cooling the absorber from 400 K to 250 K causes about 25% and 27% shift compared to the resonance frequency of room temperature, when we cooling the temperature to 150 K, we could attained both the two tunabilities exceeding 53%. The frequency tunability is owing to the variation of the dielectric constant of the low-temperature co-fired ceramic (LTCC) substrate. The mechanism of the dual band absorber is attributed to the overlapping of dual resonance frequencies, and could be demonstrated by the distributions of the electric field. The method opens up avenues for designing tunable terahertz devices in detection, imaging, and stealth technology.

  4. [Surgery of Lower Eyelid Ectropion with the Tarsal Strip Procedure, Using Absorbable or Non-Absorbable Sutures for Periosteal Fixation].

    PubMed

    Sommer, F

    2017-01-01

    Purpose Tightening of the lower eyelid is often performed and many techniques are available. This paper describes the outcome of lower eyelid ectropion repair using the lateral tarsal strip procedure. Periosteal fixation of the tarsal strip can be performed with absorbable or non-absorbable sutures. This study compares the surgical results of periosteal fixation of the tarsal strip with a) absorbable and b) non-absorbable suture. Methods Of 206 patients who underwent surgery, data from 161 were available. During the 6 month follow-up period, suture material, recurrence rates and complications were assessed. The analysis was based on photo documentation, surgery reports and patient statements. In all cases surgery was performed by the same surgeon. Results After 6 months, patients showed similar recurrence rates, regardless of whether periosteal fixation of the tarsal strip had been performed with absorbable (61 patients) or non-absorbable (100 patients) material. Only a few complications occurred, including wound healing problems and one allergic reaction in the non-absorbable group. Conclusions In cases of lower eyelid ectropion, the surgical outcome after the tarsal strip procedure was similar for absorbable and non-absorbable sutures.

  5. Effect of the bio-absorbent on the microwave absorption property of the flaky CIPs/rubber absorbers

    NASA Astrophysics Data System (ADS)

    Cheng, Yang; Xu, Yonggang; Cai, Jun; Yuan, Liming; Zhang, Deyuan

    2015-09-01

    Microwave absorbing composites filled with flaky carbonyl iron particles (CIPs) and the bio-absorbent were prepared by using a two-roll mixer and a vulcanizing machine. The electromagnetic (EM) parameters were measured by a vector network analyzer and the reflection loss (RL) was measured by the arch method in the frequency range of 1-4 GHz. The uniform dispersion of the absorbents was verified by comparing the calculated RL with the measured one. The results confirm that as the bio-absorbent was added, the permittivity was increased due to the volume content of absorbents, and the permeability was enlarged owing to the volume content of CIPs and interactions between the two absorbents. The composite filled with bio-absorbents achieved an excellent absorption property at a thickness of 1 mm (minimum RL reaches -7.8 dB), and as the RL was less than -10 dB the absorption band was widest (2.1-3.8 GHz) at a thickness of 2 mm. Therefore, the bio-absorbent is a promising additive candidate on fabricating microwave absorbing composites with a thinner thickness and wider absorption band.

  6. Spontaneous emission and absorber theory

    NASA Astrophysics Data System (ADS)

    Pegg, David T.

    1997-01-01

    One of the long term interests of George Series was the construction of a theory of spontaneous emission which does not involve field quantisation. His approach was written in terms of atomic operators only and he drew a parallel with the Wheeler-Feynman absorber theory of radiation. By making a particular extra postulate, he was able to obtain the correct spontaneous emission rate and the Lamb shift reasonably simply and directly. An examination of his approach indicates that this postulate is physically reasonable and the need for it arises because quantisation in his theory occurs after the response of the absorber has been accounted for by means of the radiative reaction field. We review briefly an alternative absorber theory approach to spontaneous emission based on the direct action between the emitting atom and a quantised absorber, and outline some applications to more recent effects of interest in quantum optics.

  7. Guided tissue regeneration. Absorbable barriers.

    PubMed

    Wang, H L; MacNeil, R L

    1998-07-01

    Over the past 15 years, techniques aimed at regeneration of lost periodontal tissue have become widely used and accepted in clinical practice. Among these techniques are those which use the principles of guided tissue regeneration (GTR), wherein barriers (i.e., membranes) are used to control cell and tissue repopulation of the periodontal wound. A variety of non-absorbable and absorbable barriers have been developed and used for this purpose, with a trend in recent years toward increased use of absorbable GTR materials. This article describes the evolution of absorbable barrier materials and overview materials available for clinical use today. In addition, advantages and disadvantages of these materials are discussed, as well as possible new developments in barrier-based GTR therapy.

  8. CuCr2O4 Spinel Ceramic Pigments Synthesized by Sol-Gel Self-Combustion Method for Solar Absorber Coatings

    NASA Astrophysics Data System (ADS)

    Ma, Pengjun; Geng, Qingfen; Gao, Xianghu; Yang, Shengrong; Liu, Gang

    2016-07-01

    A series of CuCr2O4 spinel ceramic pigments have been successfully synthesized via a facile and cost-effective sol-gel self-combustion method. The reaction mechanism was systematically studied using the corresponding characterization technologies. The results suggested that CuCr2O4 spinel ceramic pigments could be obtained at annealing temperature of 600 °C for 1 h, and the size, morphology, and crystallinity of CuCr2O4 spinel were greatly influenced by the annealing temperature. The as-burnt powder and CuCr2O4 spinel ceramic pigment were then employed to fabricate thickness sensitive spectrally selective (TSSS) paint coatings by a convenient spray-coating technique. The results revealed that spectral selectivity of TSSS paint coatings based on CuCr2O4 spinel ceramic pigments was much better than that of paint coatings based on the as-burnt powders. Furthermore, the effect of surface features of TSSS paint coatings on its optical property and hydrophobicity was investigated in detailed.

  9. Countercurrent flow absorber and desorber

    DOEpatents

    Wilkinson, W.H.

    1984-10-16

    Countercurrent flow absorber and desorber devices are provided for use in absorption cycle refrigeration systems and thermal boosting systems. The devices have increased residence time and surface area resulting in improved heat and mass transfer characteristics. The apparatuses may be incorporated into open cycle thermal boosting systems in which steam serves both as the refrigerant vapor which is supplied to the absorber section and as the supply of heat to drive the desorber section of the system. 9 figs.

  10. Countercurrent flow absorber and desorber

    DOEpatents

    Wilkinson, William H.

    1984-01-01

    Countercurrent flow absorber and desorber devices are provided for use in absorption cycle refrigeration systems and thermal boosting systems. The devices have increased residence time and surface area resulting in improved heat and mass transfer characteristics. The apparatuses may be incorporated into open cycle thermal boosting systems in which steam serves both as the refrigerant vapor which is supplied to the absorber section and as the supply of heat to drive the desorber section of the system.

  11. Metallic materials for mechanical damping capacity applications

    NASA Astrophysics Data System (ADS)

    Crăciun, R. C.; Stanciu, S.; Cimpoeșu, R.; (Dragoș Ursanu, A. I.; Manole, V.; Paraschiv, P.; Chicet, D. L.

    2016-08-01

    Some metallic materials exhibit good damping capacity of mechanical energy into thermal energy. This property along with the others metallic characteristics make this materials interesting for a big number of applications. These materials can be used as bumpers in different applications including automotive field. Beside grey cast iron and shape memory alloys few new metallic materials are presented for the supposition of high damping capacity. We analyze the causes that increase the internal friction of some metallic materials and possibilities to enhance this property through different mechanical, physical or chemical methods. Shape memory alloys, especially those based on copper, present a different damping capacity on martensite, austenite or transition state. In the transformation range M ↔A, which in case of copper base shape memory alloys is quite large, the metallic intelligent materials present a high internal friction, almost comparable with natural rubber behavior that can transform mechanical energy into thermal energy till a certain value of the external solicitation. These materials can be used as noise or small vibrations bumpers or even as shock absorbers in automotive industry.

  12. Perfect selective metamaterial solar absorbers.

    PubMed

    Wang, Hao; Wang, Liping

    2013-11-04

    In this work, we numerically investigate the radiative properties of metamaterial nanostructures made of two-dimensional tungsten gratings on a thin dielectric spacer and an opaque tungsten film from UV to mid-infrared region as potential selective solar absorbers. The metamaterial absorber with single-sized tungsten patches exhibits high absorptance in the visible and near-infrared region due to several mechanisms such as surface plasmon polaritons, magnetic polaritons, and intrinsic bandgap absorption of tungsten. Geometric effects on the resonance wavelengths and the absorptance spectra are studied, and the physical mechanisms are elucidated in detail. The absorptance could be further enhanced in a broader spectral range with double-sized metamaterial absorbers. The total solar absorptance of the optimized metamaterial absorbers at normal incidence could be more than 88%, while the total emittance is less than 3% at 100°C, resulting in total photon-to-heat conversion efficiency of 86% without any optical concentration. Moreover, the metamaterial solar absorbers exhibit quasi-diffuse behaviors as well as polarization independence. The results here will facilitate the design of novel highly efficient solar absorbers to enhance the performance of various solar energy conversion systems.

  13. Evaluation of Simplified Methods for Estimating Shear Capacity Using JNES/NUPEC Low-Rise Concrete Shear Wall Cyclic Test Data.

    SciTech Connect

    Nie,J.; Braverman, J.; Hofmayer, C.; Ali, S.

    2008-06-01

    The simplified methods in current codes for determining the shear capacity of reinforced concrete shear walls had mostly been validated using the test results of single-element shear walls. Recently available JNES/NUPEC test data of reinforced concrete shear walls under multi-directional cyclic loadings provided a unique opportunity to investigate the adequacy of the simplified methods for use in situations with strong interaction effects. A total of 11 test specimens with aspect ratios between 0.47 and 0.87 have been used in the assessment. Two simplified methods from the ACI 349-01 standard [1] and one from the ASCE 43-05 standard [2] have been evaluated. This paper also presents the development of an adjustment factor to consider the aspect ratio and the development of two approaches to consider interaction effects for one of the simplified methods. It concludes with the insights on the applicability of the code methods when interaction effects exist.

  14. Assessing and comparing the total antioxidant capacity of commercial beverages: application to beers, wines, waters and soft drinks using TRAP, TEAC and FRAP methods.

    PubMed

    Queirós, Raquel B; Tafulo, Paula A R; Sales, M Goreti F

    2013-01-01

    This work measures and tries to compare the Antioxidant Capacity (AC) of 50 commercial beverages of different kinds: 6 wines, 12 beers, 18 soft drinks and 14 flavoured waters. Because there is no reference procedure established for this purpose, three different optical methods were used to analyse these samples: Total Radical trapping Antioxidant Parameter (TRAP), Trolox Equivalent Antioxidant Capacity (TEAC) and Ferric ion Reducing Antioxidant Parameter (FRAP). These methods differ on the chemical background and nature of redox system. The TRAP method involves the transfer of hydrogen atoms while TEAC and FRAP involves electron transfer reactions. The AC was also assessed against three antioxidants of reference, Ascorbic acid (AA), Gallic acid (GA) and 6-hydroxy-2,5,7,8-tetramethyl- 2-carboxylic acid (Trolox). The results obtained were analyzed statistically. Anova one-way tests were applied to all results and suggested that methods and standards exhibited significant statistical differences. The possible effect of sample features in the AC, such as gas, flavours, food colouring, sweeteners, acidity regulators, preservatives, stabilizers, vitamins, juice percentage, alcohol percentage, antioxidants and the colour was also investigated. The AC levels seemed to change with brand, kind of antioxidants added, and kind of flavour, depending on the sample. In general, higher ACs were obtained for FRAP as method, and beer for kind of sample, and the standard expressing the smaller AC values was GA.

  15. Delayed-feedback vibration absorbers to enhance energy harvesting

    NASA Astrophysics Data System (ADS)

    Kammer, Ayhan S.; Olgac, Nejat

    2016-02-01

    Recovering energy from ambient vibrations has recently been a popular research topic. This article is conceived as a concept study that explores new directions to enhance the performance of such energy harvesting devices from base excitation. The main idea revolves around the introduction of delayed feedback sensitization (or tuning) of an active vibration absorber setup. To clarify the concept, the Delayed Resonator theory is reviewed and its suitability for energy harvesting purposes is studied. It is recognized that an actively tuned and purely resonant absorber is infeasible for such applications. The focus is then shifted to alternative tuning schemes that deviate from resonance conditions. Also called Delayed Feedback Vibration Absorbers, these devices may indeed provide significant enhancements in energy harvesting capacity. Analytical developments are presented to study energy generation and consumption characteristics. Effects of excitation frequency and absorber damping are investigated. The influences of time-delayed feedback on the stability and the transient performance of the system are also treated. The analysis starts from a stand-alone absorber, emulating seismic mass type harvesters. The work is then extended to vibration control applications, where an absorber/harvester is coupled with a primary structure. The results are demonstrated with numerical simulations on a case study.

  16. Absorbed fractions for electrons in ellipsoidal volumes

    NASA Astrophysics Data System (ADS)

    Amato, E.; Lizio, D.; Baldari, S.

    2011-01-01

    We applied a Monte Carlo simulation in Geant4 in order to calculate the absorbed fractions for monoenergetic electrons in the energy interval between 10 keV and 2 MeV, uniformly distributed in ellipsoids made from soft tissue. For each volume, we simulated a spherical shape, four oblate and four prolate ellipsoids, and one scalene shape. For each energy and for every geometrical configuration, an analytical relationship between the absorbed fraction and a 'generalized radius' was found, and the dependence of the fit parameters from electron energy is discussed and fitted by proper parametric functions. With the proposed formulation, the absorbed fraction for electrons in the 10-2000 keV energy range can be calculated for all volumes and for every ellipsoidal shape of practical interest. This method can be directly applied to evaluation of the absorbed fraction from the radionuclide emission of monoenergetic electrons, such as Auger or conversion electrons. The average deposited energy per disintegration in the case of extended beta spectra can be evaluated through integration. Two examples of application to a pure beta emitter such as 90Y and to 131I, whose emission include monoenergetic and beta electrons plus gamma photons, are presented. This approach represent a generalization of our previous studies, allowing a comprehensive treatment of absorbed fractions from electron and photon sources uniformly distributed in ellipsoidal volumes of any ellipticity and volume, in the whole range of practical interest for internal dosimetry in nuclear medicine applications, as well as in radiological protection estimations of doses from an internal contamination.

  17. Absorbed fractions for electrons in ellipsoidal volumes.

    PubMed

    Amato, E; Lizio, D; Baldari, S

    2011-01-21

    We applied a Monte Carlo simulation in Geant4 in order to calculate the absorbed fractions for monoenergetic electrons in the energy interval between 10 keV and 2 MeV, uniformly distributed in ellipsoids made from soft tissue. For each volume, we simulated a spherical shape, four oblate and four prolate ellipsoids, and one scalene shape. For each energy and for every geometrical configuration, an analytical relationship between the absorbed fraction and a 'generalized radius' was found, and the dependence of the fit parameters from electron energy is discussed and fitted by proper parametric functions. With the proposed formulation, the absorbed fraction for electrons in the 10-2000 keV energy range can be calculated for all volumes and for every ellipsoidal shape of practical interest. This method can be directly applied to evaluation of the absorbed fraction from the radionuclide emission of monoenergetic electrons, such as Auger or conversion electrons. The average deposited energy per disintegration in the case of extended beta spectra can be evaluated through integration. Two examples of application to a pure beta emitter such as (90)Y and to (131)I, whose emission include monoenergetic and beta electrons plus gamma photons, are presented. This approach represent a generalization of our previous studies, allowing a comprehensive treatment of absorbed fractions from electron and photon sources uniformly distributed in ellipsoidal volumes of any ellipticity and volume, in the whole range of practical interest for internal dosimetry in nuclear medicine applications, as well as in radiological protection estimations of doses from an internal contamination.

  18. The development of national quality performance standards for disposable absorbent products for adult incontinence.

    PubMed

    Muller, Nancy; McInnis, Elaine

    2013-09-01

    Disposable absorbent products are widely used in inpatient care settings and in the community to manage adult urinary and fecal incontinence, but few product standards exist to help guide their production or optimal use. Increasing costs and reduced revenues have caused a number of states to evaluate absorbent product use among persons who receive care at home with the assistance of the Medicaid Waiver Program, further increasing concerns about the lack of product performance standards. To address these issues, the National Association For Continence (NAFC) formed a council of experts and key stakeholders with the objective of establishing national, independent quality performance standards for disposable absorbent products provided by states to Waiver Program recipients. The Council consisted of representatives from five purposefully selected states, technical directors from six nonwoven product manufacturers, an officer of the nonwoven manufactures trade association, a delegate from an academic nursing program and professional societies, a family caregiver, and a patient representative. Following a consensus method and guidelines for use, nine specific recommendations were developed, posted for public comment, and further refined. Final recommendations for product performance assessment include: rewet rate (a measure of a product's ability to withstand multiple incontinent episodes between changes), rate of acquisition (a measure of the speed at which urine is drawn away from the skin by a product, product retention capacity (a measure of a product's capacity to hold fluid without rewetting the skin), sizing options, absorbency levels, product safety, closure technology, breathable zones (a measure of the air permeability across a textile-like fabric at a controlled differential pressure), and elasticity. The Council also set values for and recommended four quantifiable parameters, and the testing methodology associated with each, to help consumers and states

  19. Developing a Method for Operative Diagnostics and Appraisal of Working Capacity of a Combustion Chamber DG-90

    NASA Astrophysics Data System (ADS)

    Razboinikov, A. A.; Vashchilin, V. V.

    2016-10-01

    In the paper the problematics of gas transport system, main factors of an urgency of the development are described. Stages of a proposed reconstruction of combustion chamber DG-90 are introduced. Basic elements of the elaborated method for appraisal of risks of an emergency situation occurrence are given. The expected efficiency from implementation of the produced method is described.

  20. Carbon Dioxide Absorbents

    DTIC Science & Technology

    1950-05-17

    carbondioxide content of the solution was then determined. A gas mixture containing 2.6% carbon dioxide and 97.4% nitrogen was prepared in the...which carbon dioxide is removed by heat0 Since this step is usually carried out by "steam stripping ", that is, contacting the solution at its boiling...required to produce the steam required for stripping the carbon dioxide from the s olution. The method ueed in this investigation for determining the

  1. Vibration control in piping system by dual dynamic absorbers

    SciTech Connect

    Sodeyama, H.; Ikahata, N.; Sunakoda, K.; Seto, K.

    1995-12-31

    This paper deals with the applicability of a seismic response reduction method with a dual dynamic absorber for equipment, piping system, etc. in a nuclear power plant. The dual dynamic absorber which utilizes a magnetic damping effect was developed and the investigation was done to the characteristics of vibration controllability through excitation tests. As the primary stage of this study, a simple vertical straight pipe with a diameter of 60.8 mm and a length of 2,000 mm was excited by random vibration input, and amplitude of vibration level was reduced by the dual dynamic absorber mounted on the pipe. The mass ratio of the dual dynamic absorber to the straight pipe was 0.05. The result of this test was that the response reduction effect of the dual dynamic absorber for random excitations was verified. Also, the damping characteristic with fine linearity for the input level was obtained.

  2. Optimization of the acoustic absorption coefficients of certain functional absorbents

    NASA Technical Reports Server (NTRS)

    Pocsa, V.; Biborosch, L.; Veres, A.; Halpert, E.; Lorian, R.; Botos, T.

    1974-01-01

    The sound absorption coefficients of some functional absorbents (mineral wool plates) are determined by the reverberation chamber method. The influence of the angle of inclination of the sound absorbing material with respect to the surface to be treated is analyzed as well as the influence of the covering index, defined as the ratio of the designed area of a plate and the area of the treated surface belonging to another plate. As compared with the conventional method of applying sound-absorbing plates, the analyzed structures have a higher technological and economical efficiency. The optimum structure corresponds to an angle of inclination of 15 deg and a covering index of 0.8.

  3. Preliminary sizing of vibration absorber for space mast structures

    NASA Technical Reports Server (NTRS)

    Card, M. F.; Mccomb, H. G., Jr.; Peebles, S. W.

    1982-01-01

    A simple method of sizing a vibration absorber for a large, cantilevered flexible mast is presented. The method is based on Den Hartog's vibration absorber theory for two-degree-of-freedom systems. Generalized design curves are presented as well as specific numerical results for a candidate space experiment in which a long flexible antenna mast is attached to the shuttle orbiter and dynamically excited by orbiter accelerations. Results indicate that for large flexible masts, the mass of the vibration absorber required to meet stringent tip deflection tolerances becomes prohibitively large.

  4. A Modified Method for the Determination of the Azorubin Binding Capacity of Albumin in Small Amounts of Serum

    DTIC Science & Technology

    1951-09-04

    Validity of the procedure«, RESULTS A modified method has feeen described for the determination of the ABCS using only 1 ml of serum or protein ...values (Taible 9) • r TABLE 9 A¥ALI$|S 0F BQVINE SERUM Analysis öf S£V Average Value NO* of Experiments Method "Total Protein Non~ Protein ...COPIES OBTAINABLE FROM A3TlA^-DSC) ARMY MEDICAL RESEARCH LAB. , "’FORT KNÖx, KY. (REPORT ;NO; 63;), A MODIFIED METHOD FOR THE DETERMINATION OF THE

  5. Liquid absorbent solutions for separating nitrogen from natural gas

    DOEpatents

    Friesen, Dwayne T.; Babcock, Walter C.; Edlund, David J.; Lyon, David K.; Miller, Warren K.

    2000-01-01

    Nitrogen-absorbing and -desorbing compositions, novel ligands and transition metal complexes, and methods of using the same, which are useful for the selective separation of nitrogen from other gases, especially natural gas.

  6. Mushroom plasmonic metamaterial infrared absorbers

    SciTech Connect

    Ogawa, Shinpei Fujisawa, Daisuke; Hata, Hisatoshi; Uetsuki, Mitsuharu; Misaki, Koji; Kimata, Masafumi

    2015-01-26

    There has been a considerable amount of interest in the development of various types of electromagnetic wave absorbers for use in different wavelength ranges. In particular, infrared (IR) absorbers with wavelength selectivity can be applied to advanced uncooled IR sensors, which would be capable of identifying objects through their radiation spectrum. In the present study, mushroom plasmonic metamaterial absorbers (MPMAs) for the IR wavelength region were designed and fabricated. The MPMAs consist of a periodic array of thin metal micropatches connected to a thin metal plate with narrow silicon (Si) posts. A Si post height of 200 nm was achieved by isotropic XeF{sub 2} etching of a thin Si layer sandwiched between metal plates. This fabrication procedure is relatively simple and is consistent with complementary metal oxide semiconductor technology. The absorption spectra of the fabricated MPMAs were experimentally measured. In addition, theoretical calculations of their absorption properties were conducted using rigorous coupled wave analysis. Both the calculated and measured absorbance results demonstrated that these MPMAs can realize strong selective absorption at wavelengths beyond the period of the array by varying the micropatch width. Absorbance values greater than 90% were achieved. Dual- or single-mode absorption can also be selected by varying the width of the Si posts. Pixel structures using such MPMAs could be used as high responsivity, high resolution and fast uncooled IR sensors.

  7. Mushroom plasmonic metamaterial infrared absorbers

    NASA Astrophysics Data System (ADS)

    Ogawa, Shinpei; Fujisawa, Daisuke; Hata, Hisatoshi; Uetsuki, Mitsuharu; Misaki, Koji; Kimata, Masafumi

    2015-01-01

    There has been a considerable amount of interest in the development of various types of electromagnetic wave absorbers for use in different wavelength ranges. In particular, infrared (IR) absorbers with wavelength selectivity can be applied to advanced uncooled IR sensors, which would be capable of identifying objects through their radiation spectrum. In the present study, mushroom plasmonic metamaterial absorbers (MPMAs) for the IR wavelength region were designed and fabricated. The MPMAs consist of a periodic array of thin metal micropatches connected to a thin metal plate with narrow silicon (Si) posts. A Si post height of 200 nm was achieved by isotropic XeF2 etching of a thin Si layer sandwiched between metal plates. This fabrication procedure is relatively simple and is consistent with complementary metal oxide semiconductor technology. The absorption spectra of the fabricated MPMAs were experimentally measured. In addition, theoretical calculations of their absorption properties were conducted using rigorous coupled wave analysis. Both the calculated and measured absorbance results demonstrated that these MPMAs can realize strong selective absorption at wavelengths beyond the period of the array by varying the micropatch width. Absorbance values greater than 90% were achieved. Dual- or single-mode absorption can also be selected by varying the width of the Si posts. Pixel structures using such MPMAs could be used as high responsivity, high resolution and fast uncooled IR sensors.

  8. Carbon Absorber Retrofit Equipment (CARE)

    SciTech Connect

    Klein, Eric

    2015-12-23

    During Project DE-FE0007528, CARE (Carbon Absorber Retrofit Equipment), Neumann Systems Group (NSG) designed, installed and tested a 0.5MW NeuStream® carbon dioxide (CO2) capture system using the patented NeuStream® absorber equipment and concentrated (6 molal) piperazine (PZ) as the solvent at Colorado Springs Utilities’ (CSU’s) Martin Drake pulverized coal (PC) power plant. The 36 month project included design, build and test phases. The 0.5MW NeuStream® CO2 capture system was successfully tested on flue gas from both coal and natural gas combustion sources and was shown to meet project objectives. Ninety percent CO2 removal was achieved with greater than 95% CO2product purity. The absorbers tested support a 90% reduction in absorber volume compared to packed towers and with an absorber parasitic power of less than 1% when configured for operation with a 550MW coal plant. The preliminary techno-economic analysis (TEA) performed by the Energy and Environmental Research Center (EERC) predicted an over-the-fence cost of $25.73/tonne of CO2 captured from a sub-critical PC plant.

  9. Mental capacity.

    PubMed

    Williams, Ruth

    2010-02-03

    Three short videos exploring some of the different principles in the Mental Capacity Act 2009 are available on Social Care TV, an online channel intended mainly for the social care sector, although the films are relevant to any professionals whose work is affected by the act. The dramas, which are set in a residential home, a person's own home and a residential school for young people with learning difficulties, concern thedecision-making process and can be viewed at www.scie.org.uk/socialcaretv/topic.asp?guid=377dbe1b-de0c-4d66-bb87-22a243542db2.

  10. A method for determining the phosphorus sorption capacity and amorphous aluminum of aluminum-based drinking water treatment residuals.

    PubMed

    Dayton, E A; Basta, N T

    2005-01-01

    A high amorphous aluminum or iron oxide content in drinking water treatment residuals (WTRs) can result in a high phosphorus (P) sorption capacity. Therefore, WTR may be used beneficially to adsorb P and reduce P loss to surface or ground water. The strong relationship between acid ammonium oxalate-extractable aluminum (Al(ox)) and Langmuir phosphorus adsorption maximum (P(max)) in WTR could provide a useful tool for determining P(max) without the onus of the multipoint batch equilibrations necessary for the Langmuir model. The objectives of this study were to evaluate and/or modify an acid ammonium oxalate extraction of Al(ox) and the experimental conditions used to generate P adsorption isotherms to strengthen the relationship between Al(ox) and P(max). The oxalate extraction solution to WTR ratio varied from 40:1, 100:1, and 200:1. Batch equilibration conditions were also varied. The WTR particle size was reduced from <2 mm to <150 microm, and batch equilibration was extended from 17 h to 6 d. Increasing the solution to WTR ratio to 100:1 extracted significantly greater Al(ox) at levels of >50 mg Al kg(-1). No additional increase was found at 200:1. Reducing WTR particle size from <2 mm to <150 microm increased P(max) 2.46-fold. Extending the equilibration time from 17 h to 6 d increased P(max) by a mean of 5.83-fold. The resulting empirical regression equation between the optimized Al(ox) and P(max) (r(2) = 0.91, significant at the 0.001 probability level) may provide a tool to estimate the P(max) of Al-based WTR simply by measuring Al(ox). The accurate determination of WTR P(max) and Al(ox) is essential in using WTR effectively to reduce P loss in runoff or to reduce the solubility of P in agricultural soils or organic waste materials (biosolids, manure).

  11. Evaluation of phosphorus adsorption capacity of sesame straw biochar on aqueous solution: influence of activation methods and pyrolysis temperatures.

    PubMed

    Park, J H; Ok, Y S; Kim, S H; Cho, J S; Heo, J S; Delaune, R D; Seo, D C

    2015-12-01

    The phosphorus (P) adsorption characteristic of sesame straw biochar prepared with different activation agents and pyrolysis temperatures was evaluated. Between 0.109 and 0.300 mg L(-1) in the form of inorganic phosphate was released from raw sesame straw biochar in the first 1 h. The release of phosphate was significantly enhanced from 62.6 to 168.2 mg g(-1) as the pyrolysis temperature increased. Therefore, sesame straw biochar cannot be used as an adsorbent for P removal without change in the physicochemical characteristics. To increase the P adsorption of biochar in aqueous solution, various activation agents and pyrolysis temperatures were applied. The amount of P adsorbed from aqueous solution by biochar activated using different activation agents appeared in the order ZnCl2 (9.675 mg g(-1)) > MgO (8.669 mg g(-1)) ⋙ 0.1N-HCl > 0.1N-H2SO4 > K2SO4 ≥ KOH ≥ 0.1N-H3PO4, showing ZnCl2 to be the optimum activation agent. Higher P was adsorbed by the biochar activated using ZnCl2 under different pyrolysis temperatures in the order 600 °C > 500 °C > 400 °C > 300 °C. Finally, the amount of adsorbed P by activated biochar at different ratios of biochar to ZnCl2 appeared in the order 1:3 ≒ 1:1 > 3:1. As a result, the optimum ratio of biochar to ZnCl2 and pyrolysis temperature were found to be 1:1 and 600 °C for P adsorption, respectively. The maximum P adsorption capacity by activated biochar using ZnCl2 (15,460 mg kg(-1)) was higher than that of typical biochar, as determined by the Langmuir adsorption isotherm. Therefore, the ZnCl2 activation of sesame straw biochar was suitable for the preparation of activated biochar for P adsorption.

  12. Low temperature selective absorber research

    NASA Astrophysics Data System (ADS)

    Herzenberg, S. A.; Silberglitt, R.

    1982-04-01

    Research carried out since 1979 on selective absorbers is surveyed, with particular attention given to the low-temperature coatings seen as promising for flat plate and evacuated tube applications. The most thoroughly investigated absorber is black chrome, which is highly selective and is the most durable low-temperature absorber. It is believed that other materials, because of their low cost and lower content of strategic materials, may eventually supplant black chrome. Among these candidates are chemically converted black nickel; anodically oxidized nickel, zinc, and copper composites; and nickel or other low-cost multilayer coatings. In reviewing medium and high-temperature research, black chrome, multilayer coatings and black cobalt are seen as best medium-temperature candidates. For high temperatures, an Al2O3/Pt-Al203 multilayer composite or the zirconium diboride coating is preferred.

  13. Timing the warm absorber in NGC4051

    NASA Astrophysics Data System (ADS)

    Silva, C.; Uttley, P.; Costantini, E.

    2015-07-01

    In this work we have combined spectral and timing analysis in the characterization of highly ionized outflows in Seyfert galaxies, the so-called warm absorbers. Here, we present our results on the extensive ˜600ks of XMM-Newton archival observations of the bright and highly variable Seyfert 1 galaxy NGC4051, whose spectrum has revealed a complex multi-component wind. Working simultaneously with RGS and PN data, we have performed a detailed analysis using a time-dependent photoionization code in combination with spectral and Fourier timing techniques. This method allows us to study in detail the response of the gas due to variations in the ionizing flux of the central source. As a result, we will show the contribution of the recombining gas to the time delays of the most highly absorbed energy bands relative to the continuum (Silva, Uttley & Costantini in prep.), which is also vital information for interpreting the continuum lags associated with propagation and reverberation effects in the inner emitting regions. Furthermore, we will illustrate how this powerful method can be applied to other sources and warm-absorber configurations, allowing for a wide range of studies.

  14. Changes of the water-holding capacity and microstructure of panga and tilapia surimi gels using different stabilizers and processing methods.

    PubMed

    Filomena-Ambrosio, Annamaria; Quintanilla-Carvajal, María Ximena; Ana-Puig; Hernando, Isabel; Hernández-Carrión, María; Sotelo-Díaz, Indira

    2016-01-01

    Surimi gel is a food product traditionally manufactured from marine species; it has functional features including a specific texture and a high protein concentration. The objective of this study was to evaluate and compare the effect of the ultrasound extraction protein method and different stabilizers on the water-holding capacity (WHC), texture, and microstructure of surimi from panga and tilapia to potentially increase the value of these species. For this purpose, WHC was determined and texture profile analysis, scanning electron microscopy, and texture image analysis were carried out. The results showed that the ultrasound method and the sodium citrate can be used to obtain surimi gels from panga and tilapia with optimal textural properties such as the hardness and chewiness. Moreover, image analysis is recommended as a quantitative and non-invasive technique to evaluate the microstructure and texture image properties of surimis prepared using different processing methods and stabilizers.

  15. Refinery Capacity Report

    EIA Publications

    2016-01-01

    Data series include fuel, electricity, and steam purchased for consumption at the refinery; refinery receipts of crude oil by method of transportation; and current and projected atmospheric crude oil distillation, downstream charge, and production capacities. Respondents are operators of all operating and idle petroleum refineries (including new refineries under construction) and refineries shut down during the previous year, located in the 50 states, the District of Columbia, Puerto Rico, the Virgin Islands, Guam, and other U.S. possessions. The Refinery Capacity Report does not contain working and shell storage capacity data. This data is now being collected twice a year as of March 31 and September 30 on the Form EIA-810, "Monthly Refinery Report", and is now released as a separate report Working and Net Available Shell Storage Capacity.

  16. Magnetically tunable metamaterial perfect absorber

    NASA Astrophysics Data System (ADS)

    Lei, Ming; Feng, Ningyue; Wang, Qingmin; Hao, Yanan; Huang, Shanguo; Bi, Ke

    2016-06-01

    A magnetically tunable metamaterial perfect absorber (MPA) based on ferromagnetic resonance is experimentally and numerically demonstrated. The ferrite-based MPA is composed of an array of ferrite rods and a metallic ground plane. Frequency dependent absorption of the ferrite-based MPA under a series of applied magnetic fields is discussed. An absorption peak induced by ferromagnetic resonance appears in the range of 8-12 GHz under a certain magnetic field. Both the simulated and experimental results demonstrate that the absorption frequency of the ferrite-based MPA can be tuned by the applied magnetic field. This work provides an effective way to fabricate the magnetically tunable metamaterial perfect absorber.

  17. Adaptive inertial shock-absorber

    NASA Astrophysics Data System (ADS)

    Faraj, Rami; Holnicki-Szulc, Jan; Knap, Lech; Seńko, Jarosław

    2016-03-01

    This paper introduces and discusses a new concept of impact absorption by means of impact energy management and storage in dedicated rotating inertial discs. The effectiveness of the concept is demonstrated in a selected case-study involving spinning management, a recently developed novel impact-absorber. A specific control technique performed on this device is demonstrated to be the main source of significant improvement in the overall efficiency of impact damping process. The influence of various parameters on the performance of the shock-absorber is investigated. Design and manufacturing challenges and directions of further research are formulated.

  18. Damage tolerant light absorbing material

    DOEpatents

    Lauf, R.J.; Hamby, C. Jr.; Akerman, M.A.; Seals, R.D.

    1993-09-07

    A light absorbing article comprised of a composite of carbon-bonded carbon fibers, is prepared by: blending carbon fibers with a carbonizable organic powder to form a mixture; dispersing the mixture into an aqueous slurry; vacuum molding the aqueous slurry to form a green article; drying and curing the green article to form a cured article; and, carbonizing the cured article at a temperature of at least about 1000 C to form a carbon-bonded carbon fiber light absorbing composite article having a bulk density less than 1 g/cm[sup 3]. 9 figures.

  19. Damage tolerant light absorbing material

    DOEpatents

    Lauf, Robert J.; Hamby, Jr., Clyde; Akerman, M. Alfred; Seals, Roland D.

    1993-01-01

    A light absorbing article comprised of a composite of carbon-bonded carbon fibers, prepared by: blending carbon fibers with a carbonizable organic powder to form a mixture; dispersing the mixture into an aqueous slurry; vacuum molding the aqueous slurry to form a green article; drying and curing the green article to form a cured article; and, carbonizing the cured article at a temperature of at least about 1000.degree. C. to form a carbon-bonded carbon fiber light absorbing composite article having a bulk density less than 1 g/cm.sup.3.

  20. Absorbing WIPP brines : a TRU waste disposal strategy.

    SciTech Connect

    Yeamans, D. R.; Wright, R.

    2002-01-01

    Los Alamos National Laboratory (LANL) has completed experiments involving 15 each, 250-liter experimental test containers of transuranic (TRU) heterogeneous waste immersed in two types of brine similar to those found in the underground portion of the Waste Isolation Pilot Plant (WIPP). To dispose of the waste without removing the brine from the test containers, LANL added commercially available cross-linked polyacrylate granules to absorb the 190 liters of brine in each container, making the waste compliant for shipping to the WlPP in a Standard Waste Box (SWB). Prior to performing the absorption, LANL and the manufacturer of the absorbent conducted laboratory and field tests to determine the ratio of absorbent to brine that would fully absorb the liquid. Bench scale tests indicated a ratio of 10 parts Castile brine to one part absorbent and 6.25 parts Brine A to one part absorbent. The minimum ratio of absorbent to brine was sought because headspace in the containers was limited. However, full scale testing revealed that the ratio should be adjusted to be about 15% richer in absorbent. Additional testing showed that the absorbent would not apply more than 13.8 kPa pressure on the walls of the vessel and that the absorbent would still function normally at that pressure and would not degrade in the approximately 5e-4 Sv/hr radioactive field produced by the waste. Heat generation from the absorption was minimal. The in situ absorption created a single waste stream of 8 SWBs whereas the least complicated alternate method of disposal would have yielded at least an additional 2600 liters of mixed low level liquid waste plus about two cubic meters of mixed low level solid waste, and would have resulted in higher risk of radiation exposure to workers. The in situ absorption saved $3 1 lk in a combination of waste treatment, disposal, material and personnel costs compared to the least expensive alternative and $984k compared to the original plan.

  1. ABSORBING WIPP BRINES: A TRU WASTE DISPOSAL STRATEGY

    SciTech Connect

    Yeamans, D. R.; Wrights, R. S.

    2002-02-25

    Los Alamos National Laboratory (LANL) has completed experiments involving 15 each, 250- liter experimental test containers of transuranic (TRU) heterogeneous waste immersed in two types of brine similar to those found in the underground portion of the Waste Isolation Pilot Plant (WIPP). To dispose of the waste without removing the brine from the test containers, LANL added commercially available cross-linked polyacrylate granules to absorb the 190 liters of brine in each container, making the waste compliant for shipping to the WIPP in a Standard Waste Box (SWB). Prior to performing the absorption, LANL and the manufacturer of the absorbent conducted laboratory and field tests to determine the ratio of absorbent to brine that would fully absorb the liquid. Bench scale tests indicated a ratio of 10 parts Castile brine to one part absorbent and 6.25 parts Brine A to one part absorbent. The minimum ratio of absorbent to brine was sought because headspace in the containers was limited. However, full scale testing revealed that the ratio should be adjusted to be about 15% richer in absorbent. Additional testing showed that the absorbent would not apply more than 13.8 kPa pressure on the walls of the vessel and that the absorbent would still function normally at that pressure and would not degrade in the approximately 5e-4 Sv/hr radioactive field produced by the waste. Heat generation from the absorption was minimal. The in situ absorption created a single waste stream of 8 SWBs whereas the least complicated alternate method of disposal would have yielded at least an additional 2600 liters of mixed low level liquid waste plus about two cubic meters of mixed low level solid waste, and would have resulted in higher risk of radiation exposure to workers. The in situ absorption saved $311k in a combination of waste treatment, disposal, material and personnel costs compared to the least expensive alternative and $984k compared to the original plan.

  2. Mapping liquid distribution in absorbent incontinence products.

    PubMed

    Landeryou, M A; Yerworth, R J; Cottenden, A M

    2003-01-01

    This paper reviews methods available for mapping the distribution of fluid in incontinence pad materials to assist with evaluating existing products and developing new ones, and to provide data for building and validating predictive models. Specifically, the following technologies are considered and their strengths and limitations described: discrete sensors based on conductance, temperature or optical measurements, optical imaging, gravimetric methods, X-ray imaging and magnetic resonance imaging. It is suggested that the ideal method would enable fluid distribution to be mapped in three dimensions with good spatial and time resolution in single materials and composite structures of simple and complex geometries under static and dynamic mechanical loading. It would also allow liquid to be mapped in products when worn by users. It is concluded that, although each existing method meets some of these requirements, and each requirement is met, at least reasonably well, by at least one method, improved techniques are needed. The particular need for methods that can provide some measurement of liquid saturation within absorbent products, both in the laboratory and in real use, is highlighted. In many cases, simple methods used appropriately are sufficient to elicit the important aspects of liquid transport and storage within absorbent products.

  3. A restriction enzyme based cloning method to assess the in vitro replication capacity of HIV-1 subtype C Gag-MJ4 chimeric viruses.

    PubMed

    Claiborne, Daniel T; Prince, Jessica L; Hunter, Eric

    2014-08-31

    The protective effect of many HLA class I alleles on HIV-1 pathogenesis and disease progression is, in part, attributed to their ability to target conserved portions of the HIV-1 genome that escape with difficulty. Sequence changes attributed to cellular immune pressure arise across the genome during infection, and if found within conserved regions of the genome such as Gag, can affect the ability of the virus to replicate in vitro. Transmission of HLA-linked polymorphisms in Gag to HLA-mismatched recipients has been associated with reduced set point viral loads. We hypothesized this may be due to a reduced replication capacity of the virus. Here we present a novel method for assessing the in vitro replication of HIV-1 as influenced by the gag gene isolated from acute time points from subtype C infected Zambians. This method uses restriction enzyme based cloning to insert the gag gene into a common subtype C HIV-1 proviral backbone, MJ4. This makes it more appropriate to the study of subtype C sequences than previous recombination based methods that have assessed the in vitro replication of chronically derived gag-pro sequences. Nevertheless, the protocol could be readily modified for studies of viruses from other subtypes. Moreover, this protocol details a robust and reproducible method for assessing the replication capacity of the Gag-MJ4 chimeric viruses on a CEM-based T cell line. This method was utilized for the study of Gag-MJ4 chimeric viruses derived from 149 subtype C acutely infected Zambians, and has allowed for the identification of residues in Gag that affect replication. More importantly, the implementation of this technique has facilitated a deeper understanding of how viral replication defines parameters of early HIV-1 pathogenesis such as set point viral load and longitudinal CD4+ T cell decline.

  4. Counterflow absorber for an absorption refrigeration system

    DOEpatents

    Reimann, Robert C.

    1984-01-01

    An air-cooled, vertical tube absorber for an absorption refrigeration system is disclosed. Strong absorbent solution is supplied to the top of the absorber and refrigerant vapor is supplied to the bottom of the absorber to create a direct counterflow of refrigerant vapor and absorbent solution in the absorber. The refrigeration system is designed so that the volume flow rate of refrigerant vapor in the tubes of the absorber is sufficient to create a substantially direct counterflow along the entire length of each tube in the absorber. This provides several advantages for the absorber such as higher efficiency and improved heat transfer characteristics, and allows improved purging of non-condensibles from the absorber.

  5. Automated Absorber Attachment for X-ray Microcalorimeter Arrays

    NASA Technical Reports Server (NTRS)

    Moseley, S.; Allen, Christine; Kilbourne, Caroline; Miller, Timothy M.; Costen, Nick; Schulte, Eric; Moseley, Samuel J.

    2007-01-01

    Our goal is to develop a method for the automated attachment of large numbers of absorber tiles to large format detector arrays. This development includes the fabrication of high quality, closely spaced HgTe absorber tiles that are properly positioned for pick-and-place by our FC150 flip chip bonder. The FC150 also transfers the appropriate minute amount of epoxy to the detectors for permanent attachment of the absorbers. The success of this development will replace an arduous, risky and highly manual task with a reliable, high-precision automated process.

  6. Fundamental research on oscillating water column wave power absorbers

    SciTech Connect

    Maeda, H.; Kato, W.; Kinoshita, T.; Masuda, K.

    1985-03-01

    An oscillating water column (OWC) wave power absorber is one of the most promising devices, as well as the Salter Duck and the Clam. This paper presents a simple prediction method, in which the equivalent floating body approximation is used, for absorbing wave power characteristics of an oscillating water column device. The effects of the compressibility of air and inertia of an air turbine and electric generator on absorbed wave power are obtained by using the equivalent electric circuit concept. Both the experimental and theoretical studies are carried out in this paper.

  7. Metamaterial Absorbers for Microwave Detection

    DTIC Science & Technology

    2015-06-01

    a) Depiction of metamaterial array of square resonators atop FR4. (b) Metamaterial dimensions and structure...comparison for varying resonator array dimension sizes. ..............23 Figure 12. Absorption derived from raw reflection data...36 x Figure 23. Metamaterial absorber array where resonator dimensions control the detection frequencies and

  8. [Polyphenols content and antioxidant capacity in beverages made with panela].

    PubMed

    Colina, Jhoana; Guerra, Marisa; Guilarte, Doralys; Alvarado, Carlos

    2012-09-01

    The objective of this work was to determine the total polyphenols content and antioxidant capacity in beverages made with panela (a natural sweetener obtained after drying the unrefined whole sugarcane juice) in order to assess their potential as sources of antioxidants. In beverages made with three panela brands (A, B and C) with lemon, tangerine and peach flavors, the total polyphenols content was determined using the Folin-Ciocalteu's reactive and antioxidant capacity was determined by three methods: antiradical efficiency DPPH, ferric reducing power (FRP) and oxygen radical absorbance capacity (ORAC). The total polyphenols content ranged from 0.76 to 1.26 EAG g/mL and 0.73 to 1.32 EAT g/mL. The lemon flavored beverage showed the highest total polyphenols content followed by tangerine and peach flavored beverages. The three beverages had a low antiradical efficiency (AE) and the antioxidant compounds present in the beverages showed a slow kinetic. The ferric reducing power ranged from 8.28 to 10.41 mmol Fe(+2)/L. The ORAC values ranged from 1,536 to 5,220 micromol ET/100 mL. The brand B showed the highest ORAC, followed by brands A and C. The brand-flavor interaction significantly affects the total polyphenols content and the EA, thermal processing also significantly affect the AE (p < 0.05). The values of polyphenols and antioxidant capacity found in the beverages made with panela indicate that they are products potentially with antioxidant capacity.

  9. Gallbladder perforation by absorbable spiral tacker

    PubMed Central

    Wirsching, A; Vonlanthen, R

    2014-01-01

    Introduction Mesh fixation with tacker systems is common in laparoscopic and open hernia repair. Complications due to absorbable tackers are rare and have not been described in the literature. However, we report a case of gallbladder erosion due to tacker dislocation. Methods An open hernia repair was performed using an intraperitoneal onlay mesh for a recurrent parastomal hernia after two previous mesh repairs in a 67-year-old patient. Results On postoperative day 2, the patient was reoperated because of a dislocated tacker that eroded and perforated the fundus region of the gallbladder. Putatively, tacker dislocation occurred owing to imbalanced traction forces. Initially, the mesh was fixed with absorbable tackers around the stoma on the right and transmuscular suture fixation was carried out on the left abdominal side. On revision surgery, tension forces to the right were therefore neutralised by additional transmuscular sutures on the right side. Conclusions Absorbable tackers in open hernia repair provide a safe and effective mesh fixation if tension forces are carefully avoided. PMID:25245719

  10. Techniques for measuring intercepted and absorbed PAR in corn canopies

    NASA Technical Reports Server (NTRS)

    Gallo, K. P.; Daughtry, C. S. T.

    1984-01-01

    The quantity of radiation potentially available for photosynthesis that is captured by the crop is best described as absorbed photosynthetically active radiation (PAR). Absorbed PAR (APAR) is the difference between descending and ascending fluxes. The four components of APAR were measured above and within two planting densities of corn (Zea mays L.) and several methods of measuring and estimating APAR were examined. A line quantum sensor that spatially averages the photosynthetic photon flux density provided a rapid and portable method of measuring APAR. PAR reflectance from the soil (Typic Argiaquoll) surface decreased from 10% to less than 1% of the incoming PAR as the canopy cover increased. PAR reflectance from the canopy decreased to less than 3% at maximum vegetative cover. Intercepted PAR (1 - transmitted PAR) generally overestimated absorbed PAR by less than 4% throughout most of the growing season. Thus intercepted PAR appears to be a reasonable estimate of absorbed PAR.

  11. OVI absorbers in SDSS spectra

    NASA Astrophysics Data System (ADS)

    Frank, Stephan

    We conducted a systematic search for signatures of the Intergalactic Medium (IGM) in Quasar spectra of the Sloan Digital Sky Survey (SDSS) Data Release 3 (DR3), focusing on finding intervening absorbers via detection of their O VI doublet. We present a search algorithm, and criteria for distinguishing candidates from spurious Lyman a forest lines. In addition, we compare our findings with simulations of the Lyman a forest in order to estimate the detectability of O VI doublets over various redshift intervals. We obtain a sample of 1866 O VI doublet candidates with rest-frame equivalent width >= 0.05 λ in 855 AGN spectra (out of 3702 objects with redshifts in the range accessible for O VI detection). This sample is subdivided into 3 groups according to the likelihood of being real and the potential for follow-up observation of the candidate. The group with the cleanest and most secure candidates is comprised of 145 candidates. 69 of these reside at a velocity separation >= 5000 km/s from the QSO, and can therefore be classified tentatively as intervening absorbers. Most of these absorbers have not been picked up by earlier, automated QSO absorption line detection algorithms. This sample increases the number of known O VI absorbers at redshifts beyond z abs >= 2.7 substantially. We propose to obtain observations of some of the candidates with the best signatures for O VI doublets with high signal-to-noise and high resolution in order to better constrain the physical state of the absorbers. We then focused on a subsample of 387 AGN sightlines with an average S/N >= 5: 0, allowing for the detection of absorbers above a rest-frame equivalent width limit of W r >= 0:19 ? A for the O VI 1032 λ component. Accounting for random interlopers mimicking an O VI doublet, we derive for the first time a secure lower limit for the redshift number density DN/Dz for redshifts z abs >= 2:8. With extensive Monte Carlo simulations we quantify the losses of absorbers due to blending

  12. Meta-Analysis of the Copper, Zinc, and Cadmium Absorption Capacities of Aquatic Plants in Heavy Metal-Polluted Water.

    PubMed

    Li, Jing; Yu, Haixin; Luan, Yaning

    2015-11-26

    The use of aquatic plants for phytoremediation is an important method for restoring polluted ecosystems. We sought to analyze the capacity of different aquatic plant species to absorb heavy metals and to summarize available relevant scientific data on this topic. We present a meta-analysis of Cu, Zn, and Cd absorption capacities of aquatic plants to provide a scientific basis for the selection of aquatic plants suitable for remediation of heavy-metal pollution. Plants from the Gramineae, Pontederiaceae, Ceratophyllaceae, Typhaceae and Haloragaceae showed relatively strong abilities to absorb these metals. The ability of a particular plant species to absorb a given metal was strongly correlated with its ability to absorb the other metals. However, the absorption abilities varied with the plant organ, with the following trend: roots > stems > leaves. The pH of the water and the life habits of aquatic plants (submerged and emerged) also affect the plant's ability to absorb elements. Acidic water aids the uptake of heavy metals by plants. The correlation observed between element concentrations in plants with different aquatic life habits suggested that the enrichment mechanism is related to the surface area of the plant exposed to water. We argue that this meta-analysis would aid the selection of aquatic plants suitable for heavy-metal absorption from polluted waters.

  13. Meta-Analysis of the Copper, Zinc, and Cadmium Absorption Capacities of Aquatic Plants in Heavy Metal-Polluted Water

    PubMed Central

    Li, Jing; Yu, Haixin; Luan, Yaning

    2015-01-01

    The use of aquatic plants for phytoremediation is an important method for restoring polluted ecosystems. We sought to analyze the capacity of different aquatic plant species to absorb heavy metals and to summarize available relevant scientific data on this topic. We present a meta-analysis of Cu, Zn, and Cd absorption capacities of aquatic plants to provide a scientific basis for the selection of aquatic plants suitable for remediation of heavy-metal pollution. Plants from the Gramineae, Pontederiaceae, Ceratophyllaceae, Typhaceae and Haloragaceae showed relatively strong abilities to absorb these metals. The ability of a particular plant species to absorb a given metal was strongly correlated with its ability to absorb the other metals. However, the absorption abilities varied with the plant organ, with the following trend: roots > stems > leaves. The pH of the water and the life habits of aquatic plants (submerged and emerged) also affect the plant’s ability to absorb elements. Acidic water aids the uptake of heavy metals by plants. The correlation observed between element concentrations in plants with different aquatic life habits suggested that the enrichment mechanism is related to the surface area of the plant exposed to water. We argue that this meta-analysis would aid the selection of aquatic plants suitable for heavy-metal absorption from polluted waters. PMID:26703632

  14. A one-step thermal decomposition method to prepare anatase TiO2 nanosheets with improved adsorption capacities and enhanced photocatalytic activities

    NASA Astrophysics Data System (ADS)

    Li, Wenting; Shang, Chunli; Li, Xue

    2015-12-01

    Anatase TiO2 nanosheets (NSs) with high surface area have been prepared via a one-step thermal decomposition of titanium tetraisopropoxide (TTIP) in oleylamine (OM), and their adsorption capacities and photocatalytic activities are investigated by using methylene blue (MB) and methyl orange (MO) as model pollutants. During the synthesis procedure, only one type of surfactant, oleylamine (OM), is used as capping agents and no other solvents are added. Structure and properties of the TiO2 NSs were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N2 adsorption analysis, UV-vis spectrum, X-ray photoelectron spectroscopy (XPS) and Photoluminescence (PL) methods. The results indicate that the TiO2 NSs possess high surface area up to 378 m2 g-1. The concentration of capping agents is found to be a key factor controlling the morphology and crystalline structure of the product. Adsorption and photodegradation experiments reveal that the prepared TiO2 NSs possess high adsorption capacities of model pollutants MB and high photocatalytic activity, showing that TiO2 NSs can be used as efficient pollutant adsorbents and photocatalytic degradation catalysts of MB in wastewater treatment.

  15. Liposomal solubilization of new 3-hydroxy-quinolinone derivatives with promising anticancer activity: a screening method to identify maximum incorporation capacity.

    PubMed

    di Cagno, Massimiliano; Styskala, Jakub; Hlaváč, Jan; Brandl, Martin; Bauer-Brandl, Annette; Skalko-Basnet, Natasa

    2011-12-01

    Four new 3-hydroxy-quinolinone derivatives with promising anticancer activity could be solubilized using liposomes as vehicle to an extent that allows their in vitro and in vivo testing without use of toxic solvent(s). A screening method to identify the maximum incorporation capacity of hydrophobic drugs within liposomes was successfully applied. The compounds and lipid(s) were dissolved in methanol, and the solvent was removed by rotary evaporation. The film was resuspended with phosphate buffer (pH 7.4), and the dispersion was sonicated to reduce vesicle size. Ultracentrifugation was used to separate liposome-associated drug from free (i.e., precipitated) drug, and the amount of drug incorporated within the liposomes was quantified using high-performance liquid chromatography. All four compounds were found to be significantly incorporated within soy phosphatidylcholine (SPC) liposomes, resulting in a 200-500-fold increase in apparent solubility. Drug-to-lipid ratios in the range of 2-5 μg/mg were obtained. Interestingly, the four quinolinone derivatives have shown different association tendencies with liposomes, probably due to the physicochemical properties of the different group bonded in position 2 of the quinolinone ring. None of the alternative lipids/lipid blends tested incorporated as much drug as SPC. Photon correlation spectroscopy analyses indicated that use of ultrasounds produced an efficient reduction in liposome size. The present approach appears suitable for incorporation capacity studies of any lipophilic drug in liposomes.

  16. A diclofenac suppository-nabumetone combination therapy for arthritic pain relief and a monitoring method for the diclofenac binding capacity of HSA site II in rheumatoid arthritis.

    PubMed

    Setoguchi, Nao; Takamura, Norito; Fujita, Ken-ichi; Ogata, Kenji; Tokunaga, Jin; Nishio, Toyotaka; Chosa, Etsuo; Arimori, Kazuhiko; Kawai, Keiichi; Yamamoto, Ryuichi

    2013-03-01

    Diclofenac suppository, a non-steroidal anti-inflammatory drug (NSAID), is used widely in rheumatoid arthritis (RA) patients with severe arthritic pain. As the binding percentage of diclofenac to serum proteins is high, its free (unbound) concentration after rectal administration is low. To increase temporarily the free concentration of diclofenac and to enhance its analgesic effect by inhibiting the protein binding of diclofenac, the analgesic effect of diclofenac was examined before and after the start of an inhibitor administration to RA patients with insufficient control of arthritic pain, and the protein binding capacity of diclofenac was evaluated. Binding experiments were performed by ultrafiltration, and arthritic pain was recorded by the face scale. Free fractions of diazepam and diclofenac were augmented by increasing 6-methoxy-2-naphthylacetic acid (6-MNA; the active metabolite of the NSAID nabumetone) concentrations. The free fraction of diazepam increased after the start of nabumetone administration to RA patients, and arthritic pain relief was observed. These results suggest that 6-MNA has an inhibitory effect on the protein binding of diclofenac and the free fraction of diazepam can be used to evaluate the binding capacity of diclofenac. It is considered that diclofenac suppository-nabumetone combination therapy and the method for protein binding monitoring by diazepam can positively benefit RA patients with insufficient control of arthritic pain.

  17. Robust and portable capacity computing method for many finite element analyses of a high-fidelity crustal structure model aimed for coseismic slip estimation

    NASA Astrophysics Data System (ADS)

    Agata, Ryoichiro; Ichimura, Tsuyoshi; Hirahara, Kazuro; Hyodo, Mamoru; Hori, Takane; Hori, Muneo

    2016-09-01

    Computation of many Green's functions (GFs) in finite element (FE) analyses of crustal deformation is an essential technique in inverse analyses of coseismic slip estimations. In particular, analysis based on a high-resolution FE model (high-fidelity model) is expected to contribute to the construction of a community standard FE model and benchmark solution. Here, we propose a naive but robust and portable capacity computing method to compute many GFs using a high-fidelity model, assuming that various types of PC clusters are used. The method is based on the master-worker model, implemented using the Message Passing Interface (MPI), to perform robust and efficient input/output operations. The method was applied to numerical experiments of coseismic slip estimation in the Tohoku region of Japan; comparison of the estimated results with those generated using lower-fidelity models revealed the benefits of using a high-fidelity FE model in coseismic slip distribution estimation. Additionally, the proposed method computes several hundred GFs more robustly and efficiently than methods without the master-worker model and MPI.

  18. Fluorescence spectroscopy and principal component analysis of soy protein hydrolysate fractions and the potential to assess their antioxidant capacity characteristics.

    PubMed

    Ranamukhaarachchi, Sahan A; Peiris, Ramila H; Moresoli, Christine

    2017-02-15

    The potential of intrinsic fluorescence and principal component analysis (PCA) to characterize the antioxidant capacity of soy protein hydrolysates (SPH) during sequential ultrafiltration (UF) and nanofiltration (NF) was evaluated. SPH was obtained by enzymatic hydrolysis of soy protein isolate. Antioxidant capacity was measured by Oxygen Radical Absorbance Capacity (ORAC) and Folin Ciocalteau Reagent (FCR) assays together with fluorescence excitation-emission matrices (EEM). PCA of the fluorescence EEMs revealed two principal components (PC1-tryptophan, PC2-tyrosine) that captured significant variance in the fluorescence spectra. Regression models between antioxidant capacity and PC1 and PC2 displayed strong linear correlations for NF fractions and a weak linear correlation for UF fractions. Clustering of UF and NF fractions according to ORACFPCA and FCRFPCA was observed. The ability of this method to extract information on contributions by tryptophan and tyrosine amino acid residues to the antioxidant capacity of SPH fractions was demonstrated.

  19. Growth of Cu2ZnSnS4 Nanocrystallites on TiO2 Nanorod Arrays as Novel Extremely Thin Absorber Solar Cell Structure via the Successive-Ion-Layer-Adsorption-Reaction Method.

    PubMed

    Wang, Zhuoran; Demopoulos, George P

    2015-10-21

    Cu2ZnSnS4 (CZTS) is an environmentally benign semiconductor with excellent optoelectronic properties that attracts a lot of interest in thin film photovoltaics. In departure from that conventional configuration, we fabricate and test a novel absorber-conductor structure featuring in situ successive-ion-layer-adsorption-reaction (SILAR)-deposited CZTS nanocrystallites as a light absorber on one-dimensional TiO2 (rutile) nanorods as an electron conductor. The effectiveness of the nanoscale heterostructure in visible light harvesting and photoelectron generation is demonstrated with an initial short circuit current density of 3.22 mA/cm(2) and an internal quantum efficiency of ∼60% at the blue light region, revealing great potential in developing CZTS extremely thin absorber (ETA) solar cells.

  20. Digital Alloy Absorber for Photodetectors

    NASA Technical Reports Server (NTRS)

    Hill, Cory J. (Inventor); Ting, David Z. (Inventor); Gunapala, Sarath D. (Inventor)

    2016-01-01

    In order to increase the spectral response range and improve the mobility of the photo-generated carriers (e.g. in an nBn photodetector), a digital alloy absorber may be employed by embedding one (or fraction thereof) to several monolayers of a semiconductor material (insert layers) periodically into a different host semiconductor material of the absorber layer. The semiconductor material of the insert layer and the host semiconductor materials may have lattice constants that are substantially mismatched. For example, this may performed by periodically embedding monolayers of InSb into an InAsSb host as the absorption region to extend the cutoff wavelength of InAsSb photodetectors, such as InAsSb based nBn devices. The described technique allows for simultaneous control of alloy composition and net strain, which are both key parameters for the photodetector operation.

  1. Building Capacity to Use Earth Observations in Decision Making: A Case Study of NASA's DEVELOP National Program Methods and Best Practices

    NASA Astrophysics Data System (ADS)

    Childs-Gleason, L. M.; Ross, K. W.; Crepps, G.; Miller, T. N.; Favors, J. E.; Rogers, L.; Allsbrook, K. N.; Bender, M. R.; Ruiz, M. L.

    2015-12-01

    NASA's DEVELOP National Program fosters an immersive research environment for dual capacity building. Through rapid feasibility Earth science projects, the future workforce and current decision makers are engaged in research projects to build skills and capabilities to use Earth observation in environmental management and policy making. DEVELOP conducts over 80 projects annually, successfully building skills through partnerships with over 150 organizations and providing over 350 opportunities for project participants each year. Filling a void between short-term training courses and long-term research projects, the DEVELOP model has been successful in supporting state, local, federal and international government organizations to adopt methodologies and enhance decision making processes. This presentation will highlight programmatic best practices, feedback from participants and partner organizations, and three sample case studies of successful adoption of methods in the decision making process.

  2. Energy-Absorbing, Lightweight Wheels

    NASA Technical Reports Server (NTRS)

    Waydo, Peter

    2003-01-01

    Improved energy-absorbing wheels are under development for use on special-purpose vehicles that must traverse rough terrain under conditions (e.g., extreme cold) in which rubber pneumatic tires would fail. The designs of these wheels differ from those of prior non-pneumatic energy-absorbing wheels in ways that result in lighter weights and more effective reduction of stresses generated by ground/wheel contact forces. These wheels could be made of metals and/or composite materials to withstand the expected extreme operating conditions. As shown in the figure, a wheel according to this concept would include an isogrid tire connected to a hub via spring rods. The isogrid tire would be a stiff, lightweight structure typically made of aluminum. The isogrid aspect of the structure would both impart stiffness and act as a traction surface. The hub would be a thin-walled body of revolution having a simple or compound conical or other shape chosen for structural efficiency. The spring rods would absorb energy and partially isolate the hub and the supported vehicle from impact loads. The general spring-rod configuration shown in the figure was chosen because it would distribute contact and impact loads nearly evenly around the periphery of the hub, thereby helping to protect the hub against damage that would otherwise be caused by large loads concentrated onto small portions of the hub.

  3. Absorbable plate strength loss during molding.

    PubMed

    Ballard, Tiffany N S; Kelly, Kevin J; Zaydfudim, Victor; Walcutt, Noah L; Lahijani, Soheil S; Shack, R Bruce; Thayer, Wesley P

    2010-05-01

    Bioabsorbable plating systems play an integral role in cranial vault remodeling. After experiencing a case of plate failure requiring emergent reexploration, we investigated the potential causes. We hypothesize that extended submersion in the molding bath during plate preparation might advance the rate of hydrolysis and compromise plate structural integrity. Using an absorbable poly-D/L-lactic acid plating system, we assessed the effect of extended submersion on plate strength and stiffness when loaded in a cantilever fashion and with pure tension. We assessed these differences with the Student t test and linear regression modeling. We also generated a computer model of the plates for finite element analysis. When left in the molding bath for extended periods, the plates changed color and lost strength. After 5 minutes, 30% of maximum plate load capacity was lost in a cantilever beam test (P < 0.001) consistent with use of a 15% thinner plate. Tensile testing revealed the initial elastic modulus of 6.42 +/- 0.13 GPa decreased 16% to 5.41 +/- 0.50 GPa after 5 minutes of submersion (P = 0.027). The changes in plate strength and elastic modulus both worsened with increased submersion times. Finite element analysis of the plates also predicted clinically significant increases in plate deviation under normal loading conditions. Our study demonstrates that extended submersion of absorbable plates during molding results in a significant loss of plate strength and stiffness. Further, our computer model predicts that these changes could result in an unacceptable plate deviation under normal loading conditions. Together, these data caution against overmolding of plates to avoid compromising their structural integrity.

  4. Clearance of absorbed selenium by the liver

    SciTech Connect

    Kato, Tatsuko; Read, R.; Rozga, J.; Burk, R.F. )

    1991-03-11

    The liver plays a central role in the metabolism of selenium. It secretes plasma selenoproteins, contains a major fraction of the glutathione peroxidase in the body, and synthesizes excretory metabolites. The role of the liver in processing newly absorbed selenium was studied. Male chow-fed rats were fasted overnight and given 24 ng of selenium as {sup 75}SeO{sub 3}{sup 2{minus}} by stomach tube. Animals were exsanguinated at 15, 30, 45, 60, 90, 120, and 180 min after dosing. Comparison of {sup 75}Se uptake by liver, kidney, heart, muscle, testis, brain, and spleen indicated an earlier uptake by liver than by any other tissue. At 15 min, {sup 75}Se in the portal vein blood was 2.6 times that in the hepatic vein blood. Gel filtration analysis suggested a loose association of {sup 75}Se with protein in plasma at 15 min, but immunoprecipitation indicated it was largely in the form of selenoprotein P after 30 min. End-to-side portacaval shunts (PCS) were constructed in rats and sham-operated animals were used as controls. When {sup 75}SeO{sub 3}{sup 2{minus}} was given to animals with PCS, uptake of {sup 75}Se by liver did not precede uptake by other tissues. Also no gradient was detected across the lungs or kidney. {sup 75}Se content of the kidney was higher in PCS rats than in sham-operated rats. This is consistent with removal of the first-pass effect of the liver facilitating uptake of {sup 75}Se by systemic tissues. These results suggest that the preferential uptake of absorbed selenium by the liver is due both to its position in the portal circulation and to an intrinsic high uptake capacity.

  5. [Decoloring and spectral properties analysis of innoxious ultraviolet absorbents].

    PubMed

    Fang, Yi-Wen; Ni, Wen-Xiu; Huang, Chong; Xue, Liang; Yu, Lin

    2006-07-01

    The ultraviolet absorbent extracted from mango leaves, was discolored by some decoloring agent. Then the spectral properties of the discolored ultraviolet absorbents were analyzed. The discolored method of ultraviolet absorbent was studied by comparing one with the others. The results showed that the discoloring effect was satisfactory by using active carbon, H2O2, citric acid, and oxalic acid as decoloring agent. Specially, when oxalic acid was used as decoloring agent, the color of the production was slight, the rate of production was high, and the absorption effect of ultraviolet ray was well. When the concentration of the ultraviolet absorbent solution is 0.5% (w/w), the ultraviolet ray transmission was smaller than 0.3% in 200-370 nm, and it increased slightly from 370 nm. There was a maximum value at 400 nm, approaching 12%.

  6. Vibration absorbers for chatter suppression: A new analytical tuning methodology

    NASA Astrophysics Data System (ADS)

    Sims, Neil D.

    2007-04-01

    Vibration absorbers have been widely used to suppress undesirable vibrations in machining operations, with a particular emphasis on avoiding chatter. However, it is well known that for vibration absorbers to function effectively their stiffness and damping must be accurately tuned based upon the natural frequency of the vibrating structure. For general vibration problems, suitable tuning strategies were developed by Den Hartog and Brock over 50 years ago. However, the special nature of the chatter stability problem means that this classical tuning methodology is no longer optimal. Consequently, vibration absorbers for chatter mitigation have generally been tuned using ad hoc methods, or numerical or graphical approaches. The present article introduces a new analytical solution to this problem, and demonstrates its performance using time domain milling simulations. A 40-50% improvement in the critical limiting depth of cut is observed, compared to the classically tuned vibration absorber.

  7. The E-music box: an empirical method for exploring the universal capacity for musical production and for social interaction through music

    PubMed Central

    Novembre, Giacomo; Varlet, Manuel; Muawiyath, Shujau; Stevens, Catherine J.; Keller, Peter E.

    2015-01-01

    Humans are assumed to have a natural—universal—predisposition for making music and for musical interaction. Research in this domain is, however, typically conducted with musically trained individuals, and therefore confounded with expertise. Here, we present a rediscovered and updated invention—the E-music box—that we establish as an empirical method to investigate musical production and interaction in everyone. The E-music box transforms rotatory cyclical movements into pre-programmable digital musical output, with tempo varying according to rotation speed. The user’s movements are coded as continuous oscillatory data, which can be analysed using linear or nonlinear analytical tools. We conducted a proof-of-principle experiment to demonstrate that, using this method, pairs of non-musically trained individuals can interact according to conventional musical practices (leader/follower roles and lower-pitch dominance). The results suggest that the E-music box brings ‘active’ and ‘interactive’ musical capacities within everyone’s reach. We discuss the potential of this method for exploring the universal predisposition for music making and interaction in developmental and cross-cultural contexts, and for neurologic musical therapy and rehabilitation. PMID:26715993

  8. Shock absorber operates over wide range

    NASA Technical Reports Server (NTRS)

    Creasy, W. K.; Jones, J. C.

    1965-01-01

    Piston-type hydraulic shock absorber, with a metered damping system, operates over a wide range of kinetic energy loading rates. It is used for absorbing shock and vibration on mounted machinery and heavy earth-moving equipment.

  9. 21 CFR 872.6050 - Saliva absorber.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... absorber is a device made of paper or cotton intended to absorb moisture from the oral cavity during dental... manufacturing practice requirements of the quality system regulation in part 820 of this chapter, with...

  10. Direct MC conversion of absorbed dose to graphite to absorbed dose to water for 60Co radiation.

    PubMed

    Lye, J E; Butler, D J; Franich, R D; Harty, P D; Oliver, C P; Ramanathan, G; Webb, D V; Wright, T

    2013-06-01

    The ARPANSA calibration service for (60)Co gamma rays is based on a primary standard graphite calorimeter that measures absorbed dose to graphite. Measurements with the calorimeter are converted to the absorbed dose to water using the calculation of the ratio of the absorbed dose in the calorimeter to the absorbed dose in a water phantom. ARPANSA has recently changed the basis of this calculation from a photon fluence scaling method to a direct Monte Carlo (MC) calculation. The MC conversion uses an EGSnrc model of the cobalt source that has been validated against water tank and graphite phantom measurements, a step that is required to quantify uncertainties in the underlying interaction coefficients in the MC code. A comparison with the Bureau International des Poids et Mesures (BIPM) as part of the key comparison BIPM.RI(I)-K4 showed an agreement of 0.9973 (53).

  11. Building Adaptive Capacity with the Delphi Method and Mediated Modeling for Water Quality and Climate Change Adaptation in Lake Champlain Basin

    NASA Astrophysics Data System (ADS)

    Coleman, S.; Hurley, S.; Koliba, C.; Zia, A.; Exler, S.

    2014-12-01

    Eutrophication and nutrient pollution of surface waters occur within complex governance, social, hydrologic and biophysical basin contexts. The pervasive and perennial nutrient pollution in Lake Champlain Basin, despite decades of efforts, exemplifies problems found across the world's surface waters. Stakeholders with diverse values, interests, and forms of explicit and tacit knowledge determine water quality impacts through land use, agricultural and water resource decisions. Uncertainty, ambiguity and dynamic feedback further complicate the ability to promote the continual provision of water quality and ecosystem services. Adaptive management of water resources and land use requires mechanisms to allow for learning and integration of new information over time. The transdisciplinary Research on Adaptation to Climate Change (RACC) team is working to build regional adaptive capacity in Lake Champlain Basin while studying and integrating governance, land use, hydrological, and biophysical systems to evaluate implications for adaptive management. The RACC team has engaged stakeholders through mediated modeling workshops, online forums, surveys, focus groups and interviews. In March 2014, CSS2CC.org, an interactive online forum to source and identify adaptive interventions from a group of stakeholders across sectors was launched. The forum, based on the Delphi Method, brings forward the collective wisdom of stakeholders and experts to identify potential interventions and governance designs in response to scientific uncertainty and ambiguity surrounding the effectiveness of any strategy, climate change impacts, and the social and natural systems governing water quality and eutrophication. A Mediated Modeling Workshop followed the forum in May 2014, where participants refined and identified plausible interventions under different governance, policy and resource scenarios. Results from the online forum and workshop can identify emerging consensus across scales and sectors

  12. Improving the laboratory monitoring of absorbent oil

    SciTech Connect

    V.S. Shved; S.S. Sychev; I.V. Safina; S.A. Klykov

    2009-05-15

    The performance of absorbent coal tar oil is analyzed as a function of the constituent and group composition. The qualitative and quantitative composition of the oil that ensures the required absorbent properties is determined. Operative monitoring may be based on absorbent characteristics that permit regulation of the beginning and end of regeneration.

  13. Porcelain enamel neutron absorbing material

    DOEpatents

    Iverson, Daniel C.

    1990-02-06

    A porcelain enamel composition as a neutron absorbing material can be prepared of a major proportion by weight of a cadmium compound and a minor proportion of compounds of boron, lithium and silicon. These compounds in the form of a porcelain enamel coating or layer on several alloys has been found to be particularly effective in enhancing the nuclear safety of equipment for use in the processing and storage of fissile material. The composition of the porcelain enamel coating can be tailored to match the coefficient of thermal expansion of the equipment to be coated and excellent coating adhesion can be achieved.

  14. Porcelain enamel neutron absorbing material

    DOEpatents

    Iverson, D.C.

    1987-11-20

    A porcelain enamel composition as a neutron absorbing material can be prepared of a major proportion by weight of a cadmium compound and a minor proportion of compound of boron, lithium and silicon. These compounds in the form of a porcelain enamel coating or layer on several alloys has been found to be particularly effective in enhancing the nuclear safety of equipment for use in the processing and storage of fissile material. The composition of the porcelain enamel coating can be tailored to match the coefficient of thermal expansion of the equipment to be coated and excellent coating adhesion can be achieved. 2 figs.

  15. Porcelain enamel neutron absorbing material

    DOEpatents

    Iverson, Daniel C.

    1990-01-01

    A porcelain enamel composition as a neutron absorbing material can be prepared of a major proportion by weight of a cadmium compound and a minor proportion of compounds of boron, lithium and silicon. These compounds in the form of a porcelain enamel coating or layer on several alloys has been found to be particularly effective in enhancing the nuclear safety of equipment for use in the processing and storage of fissile material. The composition of the porcelain enamel coating can be tailored to match the coefficient of thermal expansion of the equipment to be coated and excellent coating adhesion can be achieved.

  16. A high absorbance material for solar collectors' applications

    NASA Astrophysics Data System (ADS)

    Oliva, A. I.; Maldonado, R. D.; Díaz, E. A.; Montalvo, A. I.

    2013-06-01

    In this work, we proposed a low cost material to be used as an excellent absorber for solar collectors, to increase its thermal efficiency by the high capacity to absorb solar radiation. The material, known as "smoke black" (soot) can be obtained by the incomplete combustion of organic materials, such as the oxygen-acetylene, paraffin, or candles. A comparative analysis between the optical properties (reflectance, absorbance, and emissivity) measured on three covered copper surfaces (without paint, with a commercial matte black paint, and with smoke black) shows amazing optical results for the smoke black. Reflectance values of the smoke black applied over copper surfaces improves 56 times the values obtained from commercial black paints. High values of emissivity (E=0.9988) were measured on the surface covered with smoke black by spectrophotometry in the UV-VIS range, which represents about 7% of increment as compared with the value obtained for commercial black paints (E=0.938). The proposed high absorbance material can be easily applied on any kind of surfaces at low cost.

  17. Removal of trichlorobenzene using 'oxygen-enriched' highly active absorbent.

    PubMed

    Zhao, Yi; He, Peng; Zhang, Yu-Hai; Ma, Shuangchen

    2011-01-01

    Fly ash, industry lime and an additive, Ca(ClO2)2 (C) were used to prepare the 'oxygen-enriched' highly active absorbent (HAA). The influencing factors for removal of 1,2,4-trichlorobenzene (TCB) using this absorbent such as reaction temperature, simulating gas flow rate, oxygen content, etc. were studied in a self-designed reactor. The optimum experimental conditions of removing 1,2,4-TCB are that the content of an oxidizing additive in the absorbent is 3% (wt), simulating gas flow rate is 100 mL/min, reaction temperature is 250 degrees C, and the content of oxygen in simulating gas is 6%. The maximum removal efficiency is 81.71% in 10 mins. The absorption capacity of the absorbent is 0.000111 g/g. The reaction products were determined by gas chromatograph/mass spectrometer (GC/ MS), 2,6-Bis-[1,1-Dimethylethyl]-4-methyl-Phenol is considered to be the major intermediate product. The reaction route was revealed.

  18. Preparation of pure chitosan film using ternary solvents and its super absorbency.

    PubMed

    Wang, Xuejun; Lou, Tao; Zhao, Wenhua; Song, Guojun

    2016-11-20

    Chemical modification and graft copolymerization were commonly adopted to prepare super absorbent materials. However, physical microstructure of pure chitosan film was optimized to improve the water uptake capacity in this study. Chitosan films with micro-nanostructure were prepared by a ternary solvent system. The optimal process parameters are 1% acetic acid water solution: dioxane: dimethyl sulfoxide=90: 2.5: 7.5 (v/v/v) with chitosan concentration at 1.25% (w/v). The water uptake capacity of the chitosan film prepared under the optimal process parameters was 896g/g. The prepared chitosan films also exhibited high water uptake capacity in response to external stimuli such as temperature, pH and salt. This finding may provide another way for improving the water absorbency. The pure chitosan film may find potential applications especially in the fields of hygienic products and biomedicine due to its super water absorbency and nontoxicity.

  19. A polarization-independent broadband terahertz absorber

    SciTech Connect

    Shi, Cheng; Zang, XiaoFei E-mail: ymzhu@usst.edu.cn; Wang, YiQiao; Chen, Lin; Cai, Bin; Zhu, YiMing E-mail: ymzhu@usst.edu.cn

    2014-07-21

    A highly efficient broadband terahertz absorber is designed, fabricated, and experimentally as well as theoretically evaluated. The absorber comprises a heavily doped silicon substrate and a well-designed two-dimensional grating. Due to the destructive interference of waves and diffraction, the absorber can achieve over 95% absorption in a broad frequency range from 1 to 2 THz and for angles of incidence from 0° to 60°. Such a terahertz absorber is also polarization-independent due to its symmetrical structure. This omnidirectional and broadband absorber have potential applications in anti-reflection coatings, imaging systems, and so on.

  20. Bioethics for clinicians: 3. Capacity.

    PubMed Central

    Etchells, E; Sharpe, G; Elliott, C; Singer, P A

    1996-01-01

    In the context of patient consent, "capacity" refers to the patient's ability to understand information relevant to a treatment decision and to appreciate the reasonably foreseeable consequences of a decision or lack of decision. A person may be "capable" with respect to one decision but not with respect to another. Clinicians can usually identify patients who are clearly capable or incapable, but in some cases a clinical capacity assessment is required. Such assessment may consist of cognitive status testing, general impressions of capacity or specific capacity assessment. Specific capacity assessment, in which the clinician evaluates the patient's ability to understand pertinent information and appreciate its implications, is probably the optimal method. When conducting a specific capacity assessment, the clinician must ensure that the disclosure of information is effective and must evaluate the patient's reason for his or her decision. If the assessment suggests that the patient is incapable, further assessment is generally recommended. PMID:8823211

  1. Modeling electron dynamics coupled to continuum states in finite volumes with absorbing boundaries

    NASA Astrophysics Data System (ADS)

    De Giovannini, Umberto; Larsen, Ask Hjorth; Rubio, Angel

    2015-03-01

    Absorbing boundaries are frequently employed in real-time propagation of the Schrödinger equation to remove spurious reflections and efficiently emulate outgoing boundary conditions. These conditions are a fundamental ingredient for the calculation of observables involving infinitely extended continuum states in finite volumes. In the literature, several boundary absorbers have been proposed. They mostly fall into three main families: mask function absorbers, complex absorbing potentials, and exterior complex-scaled potentials. To date none of the proposed absorbers is perfect, and all present a certain degree of reflections. Characterization of such reflections is thus a critical task with strong implications for time-dependent simulations of atoms and molecules. We introduce a method to evaluate the reflection properties of a given absorber and present a comparison of selected samples for each family of absorbers. Further, we discuss the connections between members of each family and show how the same reflection curves can be obtained with very different absorption schemes.

  2. Calculation of interaction-induced spectra using complex absorbing potentials

    SciTech Connect

    Gustafsson, Magnus; Antipov, Sergey V.

    2010-10-29

    A complex absorbing potential method is implemented for calculation of collision-induced spectra. The scheme provides a way to avoid the integration of the Schroedinger equation to very large separations of the collisional pair. The method is tested by reproducing a previously computed absorption spectrum for H-He at two different temperatures.

  3. Experimental characterization of a nonlinear vibration absorber using free vibration

    NASA Astrophysics Data System (ADS)

    Tang, Bin; Brennan, M. J.; Gatti, G.; Ferguson, N. S.

    2016-04-01

    Knowledge of the nonlinear characteristics of a vibration absorber is important if its performance is to be predicted accurately when connected to a host structure. This can be achieved theoretically, but experimental validation is necessary to verify the modelling procedure and assumptions. This paper describes the characterization of such an absorber using a novel experimental procedure. The estimation method is based on a free vibration test, which is appropriate for a lightly damped device. The nonlinear absorber is attached to a shaker which is operated such that the shaker works in its mass-controlled regime, which means that the shaker dynamics, which are also included in the measurement, are considerably simplified, which facilitates a simple estimation of the absorber properties. From the free vibration time history, the instantaneous amplitude and instantaneous damped natural frequency are estimated using the Hilbert transform. The stiffness and damping of the nonlinear vibration absorber are then estimated from these quantities. The results are compared with an analytical solution for the free vibration of the nonlinear system with cubic stiffness and viscous damping, which is also derived in the paper using an alternative approach to the conventional perturbation methods. To further verify the approach, the results are compared with a method in which the internal forces are balanced at each measured instant in time.

  4. Heat Capacity Mapping Mission

    NASA Technical Reports Server (NTRS)

    Nilsson, C. S.; Andrews, J. C.; Scully-Power, P.; Ball, S.; Speechley, G.; Latham, A. R. (Principal Investigator)

    1980-01-01

    The Tasman Front was delineated by airborne expendable bathythermograph survey; and an Heat Capacity Mapping Mission (HCMM) IR image on the same day shows the same principal features as determined from ground-truth. It is clear that digital enhancement of HCMM images is necessary to map ocean surface temperatures and when done, the Tasman Front and other oceanographic features can be mapped by this method, even through considerable scattered cloud cover.

  5. Improved methods for Feynman path integral calculations and their application to calculate converged vibrational–rotational partition functions, free energies, enthalpies, entropies, and heat capacities for methane

    SciTech Connect

    Mielke, Steven L. E-mail: truhlar@umn.edu; Truhlar, Donald G. E-mail: truhlar@umn.edu

    2015-01-28

    We present an improved version of our “path-by-path” enhanced same path extrapolation scheme for Feynman path integral (FPI) calculations that permits rapid convergence with discretization errors ranging from O(P{sup −6}) to O(P{sup −12}), where P is the number of path discretization points. We also present two extensions of our importance sampling and stratified sampling schemes for calculating vibrational–rotational partition functions by the FPI method. The first is the use of importance functions for dihedral angles between sets of generalized Jacobi coordinate vectors. The second is an extension of our stratification scheme to allow some strata to be defined based only on coordinate information while other strata are defined based on both the geometry and the energy of the centroid of the Feynman path. These enhanced methods are applied to calculate converged partition functions by FPI methods, and these results are compared to ones obtained earlier by vibrational configuration interaction (VCI) calculations, both calculations being for the Jordan–Gilbert potential energy surface. The earlier VCI calculations are found to agree well (within ∼1.5%) with the new benchmarks. The FPI partition functions presented here are estimated to be converged to within a 2σ statistical uncertainty of between 0.04% and 0.07% for the given potential energy surface for temperatures in the range 300–3000 K and are the most accurately converged partition functions for a given potential energy surface for any molecule with five or more atoms. We also tabulate free energies, enthalpies, entropies, and heat capacities.

  6. Improved methods for Feynman path integral calculations and their application to calculate converged vibrational-rotational partition functions, free energies, enthalpies, entropies, and heat capacities for methane.

    PubMed

    Mielke, Steven L; Truhlar, Donald G

    2015-01-28

    We present an improved version of our "path-by-path" enhanced same path extrapolation scheme for Feynman path integral (FPI) calculations that permits rapid convergence with discretization errors ranging from O(P(-6)) to O(P(-12)), where P is the number of path discretization points. We also present two extensions of our importance sampling and stratified sampling schemes for calculating vibrational-rotational partition functions by the FPI method. The first is the use of importance functions for dihedral angles between sets of generalized Jacobi coordinate vectors. The second is an extension of our stratification scheme to allow some strata to be defined based only on coordinate information while other strata are defined based on both the geometry and the energy of the centroid of the Feynman path. These enhanced methods are applied to calculate converged partition functions by FPI methods, and these results are compared to ones obtained earlier by vibrational configuration interaction (VCI) calculations, both calculations being for the Jordan-Gilbert potential energy surface. The earlier VCI calculations are found to agree well (within ∼1.5%) with the new benchmarks. The FPI partition functions presented here are estimated to be converged to within a 2σ statistical uncertainty of between 0.04% and 0.07% for the given potential energy surface for temperatures in the range 300-3000 K and are the most accurately converged partition functions for a given potential energy surface for any molecule with five or more atoms. We also tabulate free energies, enthalpies, entropies, and heat capacities.

  7. Effects of brewing conditions on the antioxidant capacity of twenty-four commercial green tea varieties.

    PubMed

    Sharpe, Erica; Hua, Fang; Schuckers, Stephanie; Andreescu, Silvana; Bradley, Ryan

    2016-02-01

    A novel paper-based Nanoceria Reducing Antioxidant Capacity (NanoCerac) assay for antioxidant detection (Sharpe, Frasco, Andreescu, & Andreescu, 2012), has been adapted for the first time as a high-throughput method, in order to measure the effect of brewing conditions and re-infusion on the antioxidant capacity of twenty-four commercial green teas. The oxygen radical absorbance capacity (ORAC) assay, frequently applied to complex foods and beverages, was used as a comparator measure of antioxidant capacity. A novel measure of sustained antioxidant capacity, the total inherent antioxidant capacity (TI-NanoCerac and TI-ORAC) was measured by infusing each tea six times. Effects of brewing conditions (temperature, brew time, etc.) were assessed using one popular tea as a standard. Both NanoCerac and ORAC assays correlated moderately (R(2) 0.80 ± 0.19). The average first-brew NanoCerac, TI-NanoCerac, first-brew ORAC and TI-ORAC were: 0.73 ± 0.1 GAE/g tea; 2.4 ± 0.70 mmolGAE/g tea; 1.0 ± 0.3 mmolTE/g tea and 2.1 ± 0.71 mmolTE/g tea respectively. Brewing conditions including water temperature and infusion time significantly affected antioxidant capacity. The high-throughput adaptation of the original NanoCerac assay tested here offered advantages over ORAC, including portability and rapid analysis.

  8. Effects of Brewing Conditions on the Antioxidant Capacity of Twenty-four Commercial Green Tea Varieties

    PubMed Central

    Sharpe, Erica; Hua, Fang; Schuckers, Stephanie; Andreescu, Silvana; Bradley, Ryan

    2015-01-01

    A novel paper-based Nanoceria Reducing Antioxidant Capacity (NanoCerac) assay for antioxidant detection (Sharpe, Frasco, Andreescu, & Andreescu, 2012), has been adapted for the first time as a high-throughput method, in order to measure the effect of brewing conditions and re-infusion on the antioxidant capacity of twenty-four commercial green teas. The oxygen radical absorbance capacity (ORAC) assay, frequently applied to complex foods and beverages, was used as a comparator measure of antioxidant capacity. A novel measure of sustained antioxidant capacity, the total inherent antioxidant capacity (TI-NanoCerac and TI-ORAC) was measured by infusing each tea six times. Effects of brewing conditions (temperature, brew time, etc.) were assessed using one popular tea as a standard. Both NanoCerac and ORAC assays correlated moderately (R2 0.80 ± 0.19). The average first-brew NanoCerac, TI-NanoCerac, first-brew ORAC and TI-ORAC were: 0.73 ± 0.1 GAE/g tea ; 2.4 ± 0.70 mmol GAE/g tea; 1.0 ± 0.3 mmol TE/g tea and 2.1 ± 0.71 mmol TE/g tea respectively. Brewing conditions including water temperature and infusion time significantly affected antioxidant capacity. The high-throughput adaptation of the original NanoCerac assay tested here offered advantages over ORAC, including portability and rapid analysis. PMID:26304363

  9. Wave based optimization of distributed vibration absorbers

    NASA Astrophysics Data System (ADS)

    Johnson, Marty; Batton, Brad

    2005-09-01

    The concept of distributed vibration absorbers or DVAs has been investigated in recent years as a method of vibration control and sound radiation control for large flexible structures. These devices are comprised of a distributed compliant layer with a distributed mass layer. When such a device is placed onto a structure it forms a sandwich panel configuration with a very soft core. With this configuration the main effect of the DVA is to create forces normal to the surface of the structure and can be used at low frequencies to either add damping, where constrain layer damper treatments are not very effective, or to pin the structure over a narrow frequency bandwidth (i.e., large input impedance/vibration absorber approach). This paper analyses the behavior of these devices using a wave based approach and finds an optimal damping level for the control of broadband disturbances in panels. The optimal design is calculated by solving the differential equations for waves propagating in coupled plates. It is shown that the optimal damping calculated using the infinite case acts as a good ``rule of thumb'' for designing DVAs to control the vibration of finite panels. This is bourn out in both numerical simulations and experiments.

  10. Wave energy extraction by coupled resonant absorbers.

    PubMed

    Evans, D V; Porter, R

    2012-01-28

    In this article, a range of problems and theories will be introduced that will build towards a new wave energy converter (WEC) concept, with the acronym 'ROTA' standing for resonant over-topping absorber. First, classical results for wave power absorption for WECs constrained to operate in a single degree of freedom will be reviewed and the role of resonance in their operation highlighted. Emphasis will then be placed on how the introduction of further resonances can improve power take-off characteristics by extending the range of frequencies over which the efficiency is close to a theoretical maximum. Methods for doing this in different types of WECs will be demonstrated. Coupled resonant absorbers achieve this by connecting a WEC device equipped with its own resonance (determined from a hydrodynamic analysis) to a new system having separate mass/spring/damper characteristics. It is shown that a coupled resonant effect can be realized by inserting a water tank into a WEC, and this idea forms the basis of the ROTA device. In essence, the idea is to exploit the coupling between the natural sloshing frequencies of the water in the internal tank and the natural resonance of a submerged buoyant circular cylinder device that is tethered to the sea floor, allowing a rotary motion about its axis of attachment.

  11. A new in vivo magnetic resonance imaging method to noninvasively monitor and quantify the perfusion capacity of three-dimensional biomaterials grown on the chorioallantoic membrane of chick embryos.

    PubMed

    Kivrak Pfiffner, Fatma; Waschkies, Conny; Tian, Yinghua; Woloszyk, Anna; Calcagni, Maurizio; Giovanoli, Pietro; Rudin, Markus; Buschmann, Johanna

    2015-04-01

    Adequate vascularization in biomaterials is essential for tissue regeneration and repair. Current models do not allow easy analysis of vascularization of implants in vivo, leaving it a highly desirable goal. A tool that allows monitoring of perfusion capacity of such biomaterials noninvasively in a cheap, efficient, and reliable in vivo model would hence add great benefit to research in this field. We established, for the first time, an in vivo magnetic resonance imaging (MRI) method to quantify the perfusion capacity of a model biomaterial, DegraPol(®) foam scaffold, placed on the embryonic avian chorioallantoic membrane (CAM) in ovo. Perfusion capacity was assessed through changes in the longitudinal relaxation rate before and after injection of a paramagnetic MRI contrast agent, Gd-DOTA (Dotarem(®); Guerbet S.A.). Relaxation rate changes were compared in three different regions of the scaffold, that is, at the interface to the CAM, in the middle and on the surface of the scaffold (p<0.05). The highest relaxation rate changes, and hence perfusion capacities, were measured in the interface region where the scaffold was attached to the CAM, whereas the surface of the scaffold showed the lowest relaxation rate changes. A strong positive correlation was obtained between relaxation rate changes and histologically determined vessel density (R(2) = 0.983), which corroborates our MRI findings. As a proof-of-principle, we measured the perfusion capacity in different scaffold materials, silk fibroin either with or without human dental pulp stem cells. For these, three to four times larger perfusion capacities were obtained compared to DegraPol; demonstrating that our method is sensitive to reveal such differences. In summary, we present a novel in vivo method for analyzing the perfusion capacity in three-dimensional-biomaterials grown on the CAM, enabling the determination of the perfusion capacity of a large variety of bioengineered materials.

  12. Vibration Control of Shallow Shell Structures Using a Shell-Type Dynamic Vibration Absorber

    NASA Astrophysics Data System (ADS)

    Aida, T.; Aso, T.; Nakamoto, K.; Kawazoe, K.

    1998-11-01

    In this study, a new shell-type dynamic vibration absorber is presented for suppressing several modes of vibration of the shallow shell (main shell) under harmonic load. It consists of a shallow shell (the dynamic absorbing shell), under the same boundary condition and with the same shape as those of the main shell, with connecting springs and dampers in the vertical direction between the main and dynamic absorbing shells. Formulae for an approximate tuning method for the shell-type dynamic absorber are also presented using the optimum tuning method for a dynamic absorber in the two-degree-of-freedom system, obtained by the Den Hartog method. Subsequently, numerical calculations are presented which demonstrate the usefulness of the shell-type dynamic vibration absorbers.

  13. Design of a nonlinear vibration absorber using three-to-one internal resonances

    NASA Astrophysics Data System (ADS)

    Ji, J. C.

    2014-01-01

    A weakly nonlinear vibration absorber is designed to attenuate the primary resonance vibrations of a single-degree-of-freedom weakly nonlinear oscillator having cubic nonlinearity. The linearised natural frequency of the nonlinear absorber is tuned to be approximately one-third the linearised natural frequency of the primary nonlinear oscillator. The low frequency mode for the absorber is favourably considered based on the fact that the nonlinear absorber can be easily realised in practice by using a light-weight mass attachment with small values of linear and nonlinear stiffness of coupling. For a given primary nonlinear oscillator and absorber mass, implementation of three-to-one internal resonances requires the smallest value of the absorber linear stiffness among three options for utilising internal resonances to design nonlinear absorber. The method of multiple scales is used to obtain the averaged equations that determine the amplitudes and phases of the first-order approximate solutions to the vibrations of the primary nonlinear oscillator and nonlinear absorber. It is found that the absorber response may admit either forced vibration having the forcing frequency or a combination of forced vibration and free-oscillation term having one third the forcing frequency. The nonlinear absorber can effectively suppress the amplitude of primary resonance response and eliminate saddle-node bifurcations occurring in the frequency-response curves of the primary nonlinear oscillator. Numerical results are given to show the effectiveness of the nonlinear absorber for suppressing nonlinear vibrations of the primary nonlinear oscillator under primary resonance conditions.

  14. In vivo assessment of the capacity of androstenedione to masculinize female mosquitofish (Gambusia affinis) exposed through dietary and static renewal methods.

    PubMed

    Stanko, Jason P; Angus, Robert A

    2007-05-01

    In this study, we investigated the capacity of androstenedione to masculinize female mosquitofish. Previous studies have identified androstenedione in the water and sediment of the Fenholloway River, a Florida, USA, coastal river that receives paper mill effluent and contains masculinized eastern mosquitofish (Gambusia holbrooki). Females of the closely related western mosquitofish, Gambusia affinis, were exposed to androstenedione through both dietary and static renewal treatments. Morphological masculinization of female mosquitofish is characterized by the development of a male secondary sexual trait: an elongated and modified anal fin (gonopodium). Dietary exposure to 0.7, 7, 70, and 700 microg of androstenedione per gram of food failed to induce gonopodial development at any concentration within the six-week exposure period. Static renewal treatments used androstenedione concentrations of 0.14, 1.4, 14, 140, and 350 nM. Significant anal fin ray elongation was observed in all but the lowest exposure group. Fish growth during the static renewal exposure experiment was negatively correlated with androstenedione concentration. No significant effects were observed for gonadosomatic index, vitellogenin expression, or ovarian area in fish exposed to androstenedione via either the dietary or static renewal methods. These results indicate that exposure to androstenedione via water can cause masculinization of adult female mosquitofish in a relatively short period of time and that acute dietary exposure to androstenedione at the concentrations used is not sufficient to induce masculinization.

  15. The American Thoracic Society methods in epidemiologic, clinical, and operations research program. A research capacity-building program in low- and middle-income countries.

    PubMed

    Buist, A Sonia; Parry, Vivienne

    2013-08-01

    Respiratory diseases are a major cause of morbidity and mortality worldwide. The greatest impact of many of these diseases is felt in low- and middle-income countries, but their control and management is hampered by lack of accurate estimates of their prevalence, risk factors, and distribution, and knowledge of the social and cultural setting in which they occur. Providing enough information for cost-effective response to respiratory diseases requires research by trained investigators and public health personnel. The American Thoracic Society (ATS) Methods in Epidemiologic, Clinical, and Operations Research (MECOR) Program was launched in 1994 to provide a sustainable means of increasing local and national research capacity aimed at addressing this need. As of March 2013, approximately 1,015 students have completed at least one level of the training program. Post-MECOR, 64% of participants have published a medical paper, 79% have presented at a scientific or academic meeting, 51% have submitted a research protocol for funding, and 42% have had one funded. One-quarter have been awarded an academic or clinical fellowship, and 78% reported that MECOR had made a significant or extremely important contribution to their professional life and accomplishments. Future challenges include funding, recruitment of local faculty, helping to build the research infrastructure in MECOR countries, and providing ongoing mentoring for research.

  16. A neutron-absorbing porcelain enamel for coating nuclear equipment

    SciTech Connect

    Iverson, D.C.

    1988-01-01

    In 1985, nuclear safety analyses showed that under upset conditions, strict administrative controls were necessary to limit access to a new processing vessel for enriched uranium service at the Savannah River Plant (SRP). In order to increase the level of nuclear safety associated with that vessel, the traditional methods of incorporating neutron absorbers (borated stainless steel, boral, cadmium foil, etc.) were reviewed, however, process conditions did not permit their use. A neutron-absorbing porcelain enamel containing large amounts of cadmium and boron was developed as a safe, cost-effective alternative to traditional neutron-absorbing methods. Several pieces of coated process equipment have been installed or are planned for installation at SRP.

  17. Liquid crystal tunable metamaterial absorber.

    PubMed

    Shrekenhamer, David; Chen, Wen-Chen; Padilla, Willie J

    2013-04-26

    We present an experimental demonstration of electronically tunable metamaterial absorbers in the terahertz regime. By incorporation of active liquid crystal into strategic locations within the metamaterial unit cell, we are able to modify the absorption by 30% at 2.62 THz, as well as tune the resonant absorption over 4% in bandwidth. Numerical full-wave simulations match well to experiments and clarify the underlying mechanism, i.e., a simultaneous tuning of both the electric and magnetic response that allows for the preservation of the resonant absorption. These results show that fundamental light interactions of surfaces can be dynamically controlled by all-electronic means and provide a path forward for realization of novel applications.

  18. Oxalate: Effect on calcium absorbability

    SciTech Connect

    Heaney, R.P.; Weaver, C.M. )

    1989-10-01

    Absorption of calcium from intrinsically labeled Ca oxalate was measured in 18 normal women and compared with absorption of Ca from milk in these same subjects, both when the test substances were ingested in separate meals and when ingested together. Fractional Ca absorption from oxalate averaged 0.100 +/- 0.043 when ingested alone and 0.140 +/- 0.063 when ingested together with milk. Absorption was, as expected, substantially lower than absorption from milk (0.358 +/- 0.113). Nevertheless Ca oxalate absorbability in these women was higher than we had previously found for spinach Ca. When milk and Ca oxalate were ingested together, there was no interference of oxalate in milk Ca absorption and no evidence of tracer exchange between the two labeled Ca species.

  19. A Novel Method for Quantifying the Inhaled Dose of Air Pollutants Based on Heart Rate, Breathing Rate and Forced Vital Capacity

    PubMed Central

    Greenwald, Roby; Hayat, Matthew J.; Barton, Jerusha; Lopukhin, Anastasia

    2016-01-01

    To better understand the interaction of physical activity and air pollution exposure, it is important to quantify the change in ventilation rate incurred by activity. In this paper, we describe a method for estimating ventilation using easily-measured variables such as heart rate (HR), breathing rate (fB), and forced vital capacity (FVC). We recruited healthy adolescents to use a treadmill while we continuously measured HR, fB, and the tidal volume (VT) of each breath. Participants began at rest then walked and ran at increasing speed until HR was 160–180 beats per minute followed by a cool down period. The novel feature of this method is that minute ventilation (V˙E) was normalized by FVC. We used general linear mixed models with a random effect for subject and identified nine potential predictor variables that influence either V˙E or FVC. We assessed predictive performance with a five-fold cross-validation procedure. We used a brute force selection process to identify the best performing models based on cross-validation percent error, the Akaike Information Criterion and the p-value of parameter estimates. We found a two-predictor model including HR and fB to have the best predictive performance (V˙E/FVC = -4.247+0.0595HR+0.226fB, mean percent error = 8.1±29%); however, given the ubiquity of HR measurements, a one-predictor model including HR may also be useful (V˙E/FVC = -3.859+0.101HR, mean percent error = 11.3±36%). PMID:26809066

  20. Acoustic metamaterial structures based on multi-frequency vibration absorbers

    NASA Astrophysics Data System (ADS)

    Pai, P. Frank; Peng, Hao

    2014-03-01

    This paper presents a new metamaterial beam based on multi-frequency vibration absorbers for broadband vibration absorption. The proposed metamaterial beam consists of a uniform isotropic beam and small two-mass spring-mass- damper subsystems at many locations along the beam to act as multi-frequency vibration absorbers. For an infinite metamaterial beam, governing equations of a unit cell are derived using the extended Hamilton principle. The existence of two stopbands is demonstrated using a model based on averaging material properties over a cell length and a model based on finite element modeling and the Bloch-Floquet theory for periodic structures. For a finite metamaterial beam, because these two idealized models cannot be used for finite beams and/or elastic waves having short wavelengths, a finite-element method is used for detailed modeling and analysis. The concepts of negative effective mass and effective stiffness and how the spring-mass-damper subsystem creates two stopbands are explained in detail. Numerical simulations reveal that the actual working mechanism of the proposed metamaterial beam is based on the concept of conventional mechanical vibration absorbers. For an incoming wave with a frequency in one of the two stopbands, the absorbers are excited to vibrate in their optical modes to create shear forces to straighten the beam and stop the wave propagation. For an incoming wave with a frequency outside of but between the two stopbands, it can be efficiently damped out by the damper with the second mass of each absorber. Hence, the two stopbands are connected into a wide stopband. Numerical examples validate the concept and show that the structure's boundary conditions do not have significant influence on the absorption of high-frequency waves. However, for absorption of low-frequency waves, the structure's boundary conditions and resonance frequencies and the location and spatial distribution of absorbers need to be considered in design, and it

  1. Integrated Microcalorimeters Using Ir TES And Sn Mushroom Absorbers

    SciTech Connect

    Chen, C.; Bogorin, D.; Galeazzi, M.

    2006-09-07

    Cryogenic microcalorimeters have the potential to meet the requirements of future x-ray missions. The University of Miami has recently started a program to fabricate fully integrated microcalorimeter arrays. We deposit high purity iridium thin film as Transition Edge Sensors (TES). We chose iridium because it has a bulk transition temperature of 112 mK and we expect single layer TES to have good reproducibility and long term stability. Also we use integrated tin film in a mushroom geometry as the absorbers to get high filling factor, low heat capacity and easy array manufacturing process. We present here our preliminary results in both areas.

  2. Electromagnetic scattering by pyramidal and wedge absorber

    NASA Technical Reports Server (NTRS)

    Dewitt, Brian T.; Burnside, Walter D.

    1988-01-01

    Electromagnetic scattering from pyramidal and wedge absorbers used to line the walls of modern anechoic chambers is measured and compared with theoretically predicted values. The theoretical performance for various angles of incidence is studied. It is shown that a pyramidal absorber scatters electromagnetic energy more as a random rough surface does. The apparent reflection coefficient from an absorber wall illuminated by a plane wave can be much less than the normal absorber specifications quoted by the manufacturer. For angles near grazing incidence, pyramidal absorbers give a large backscattered field from the pyramid side-faces or edges. The wedge absorber was found to give small backscattered fields for near-grazing incidence. Based on this study, some new guidelines for the design of anechoic chambers are advocated because the specular scattering models used at present do not appear valid for pyramids that are large compared to the wavelength.

  3. Magnetic field effects on microwave absorbing materials

    NASA Technical Reports Server (NTRS)

    Goldberg, Ira; Hollingsworth, Charles S.; Mckinney, Ted M.

    1991-01-01

    The objective of this program was to gather information to formulate a microwave absorber that can work in the presence of strong constant direct current (DC) magnetic fields. The program was conducted in four steps. The first step was to investigate the electrical and magnetic properties of magnetic and ferrite microwave absorbers in the presence of strong magnetic fields. This included both experimental measurements and a literature survey of properties that may be applicable to finding an appropriate absorbing material. The second step was to identify those material properties that will produce desirable absorptive properties in the presence of intense magnetic fields and determine the range of magnetic field in which the absorbers remain effective. The third step was to establish ferrite absorber designs that will produce low reflection and adequate absorption in the presence of intense inhomogeneous static magnetic fields. The fourth and final step was to prepare and test samples of such magnetic microwave absorbers if such designs seem practical.

  4. Cusps, self-organization, and absorbing states.

    PubMed

    Bonachela, Juan A; Alava, Mikko; Muñoz, Miguel A

    2009-05-01

    Elastic interfaces embedded in (quenched) random media exhibit metastability and stick-slip dynamics. These nontrivial dynamical features have been shown to be associated with cusp singularities of the coarse-grained disorder correlator. Here we show that annealed systems with many absorbing states and a conservation law but no quenched disorder exhibit identical cusps. On the other hand, similar nonconserved systems in the directed percolation class are also shown to exhibit cusps but of a different type. These results are obtained both by a recent method to explicitly measure disorder correlators and by defining an alternative new protocol inspired by self-organized criticality, which opens the door to easily accessible experimental realizations.

  5. Porous Carbon Nanoparticle Networks with Tunable Absorbability

    PubMed Central

    Dai, Wei; Kim, Seong Jin; Seong, Won-Kyeong; Kim, Sang Hoon; Lee, Kwang-Ryeol; Kim, Ho-Young; Moon, Myoung-Woon

    2013-01-01

    Porous carbon materials with high specific surface areas and superhydrophobicity have attracted much research interest due to their potential application in the areas of water filtration, water/oil separation, and oil-spill cleanup. Most reported superhydrophobic porous carbon materials are fabricated by complex processes involving the use of catalysts and high temperatures but with low throughput. Here, we present a facile single-step method for fabricating porous carbon nanoparticle (CNP) networks with selective absorbability for water and oils via the glow discharge of hydrocarbon plasma without a catalyst at room temperature. Porous CNP networks were grown by the continuous deposition of CNPs at a relatively high deposition pressure. By varying the fluorine content, the porous CNP networks exhibited tunable repellence against liquids with various degrees of surface tension. These porous CNP networks could be applied for the separation of not only water/oil mixtures but also mixtures of liquids with different surface tension levels. PMID:23982181

  6. Absorbing layers for the Dirac equation

    SciTech Connect

    Pinaud, Olivier

    2015-05-15

    This work is devoted to the construction of perfectly matched layers (PML) for the Dirac equation, that not only arises in relativistic quantum mechanics but also in the dynamics of electrons in graphene or in topological insulators. While the resulting equations are stable at the continuous level, some care is necessary in order to obtain a stable scheme at the discrete level. This is related to the so-called fermion doubling problem. For this matter, we consider the numerical scheme introduced by Hammer et al. [19], and combine it with the discretized PML equations. We state some arguments for the stability of the resulting scheme, and perform simulations in two dimensions. The perfectly matched layers are shown to exhibit, in various configurations, superior absorption than the absorbing potential method and the so-called transport-like boundary conditions.

  7. Absorbent product and articles made therefrom

    NASA Technical Reports Server (NTRS)

    Dawn, F. S.; Correale, J. V. (Inventor)

    1982-01-01

    A multilayer absorbent product for use in contact with the skin to absorb fluids is described. The product has a water pervious facing layer for contacting the skin, and a first fibrous wicking layer overlaying the water pervious layer. A first container section is defined by inner and outer layers of a water pervious wicking material in between a first absorbent mass and a second container section defined by inner and outer layers of a water pervious wicking material between what is disposed a second absorbent mass, and a liquid impermeable/gas permeable layer overlaying the second fibrous wicking layer.

  8. Metamaterial absorber with random dendritic cells

    NASA Astrophysics Data System (ADS)

    Zhu, Weiren; Zhao, Xiaopeng

    2010-05-01

    The metamaterial absorber composed of random dendritic cells has been investigated at microwave frequencies. It is found that the absorptivities come to be weaker and the resonant frequency get red shift as the disordered states increasing, however, the random metamaterial absorber still presents high absorptivity more than 95%. The disordered structures can help understanding of the metamaterial absorber and may be employed for practical design of infrared metamaterial absorber, which may play important roles in collection of radiative heat energy and directional transfer enhancement.

  9. Measurements of Light Absorbing Particles on Tropical South American Glaciers

    NASA Astrophysics Data System (ADS)

    Schmitt, C. G.; All, J.; Schwarz, J. P.; Arnott, W. P.; Warthon, J.; Andrade, M.; Celestian, A. J.; Hoffmann, D.; Cole, R. J.; Lapham, E.; Horodyskyj, U. N.; Froyd, K. D.; Liao, J.

    2014-12-01

    Glaciers in the tropical Andes have been losing mass rapidly in recent decades. In addition to the documented increase in temperature, increases in light absorbing particulates deposited on glaciers could be contributing to the observed glacier loss. Here we present results of measurements of light absorbing particles from glaciers in Peru and Bolivia. Samples have been collected by American Climber Science Program volunteers and scientists at altitudes up to 6770 meters. Collected snow samples were melted and filtered in the field. A new inexpensive technique, the Light Absorption Heating Method (LAHM) has been developed for analysis of light absorbing particles collected on filters. Results from LAHM analysis are calibrated using filters with known amounts of fullerene soot, a common industrial surrogate for black carbon (BC). For snow samples collected at the same field location LAHM analysis and measurements from the Single Particle Soot Photometer (SP2) instrument are well correlated (r2 = 0.92). Co-located SP2 and LAHM filter analysis suggest that BC could be the dominant absorbing component of the light absorbing particles in some areas.

  10. R-SQUARE IMPEDANCES OF ERL FERRITE HOM ABSORBER.

    SciTech Connect

    HAHN, H.; BURRILL, A.; CALAGA,R.; KAYRAN, D.; ZHAO, Y.

    2005-07-10

    An R&D facility for an Energy Recovery Linac (ERL) intended as part of an electron-cooling project for RHIC is, being constructed at this laboratory. The center piece of the facility is a 5-cell 703.75 MHz super-conducting RF linac. Successful operation will depend on effective HOM damping. It is planned to achieve HOM damping exclusively with ferrite absorbers. The performance of a prototype absorber was measured by transforming it into a resonant cavity and alternatively by a conventional wire method. The results expressed as a surface or R-square impedance are presented in this paper.

  11. Single-phase Stefan problem in selectively absorbing medium

    NASA Astrophysics Data System (ADS)

    Sleptsov, S. D.; Rubtsov, N. A.; Savvinova, N. A.

    2016-01-01

    The thermal state of a translucent selectively absorbing medium was studied by the methods of numerical simulation at different values of the optical properties of boundaries and heat transfer from the left surface in approximation of one-phase Stefan problem. The temperature fields and densities of resultant radiation fluxes as well as the thermal state of the left boundary and dynamics of layer reduction in the melting process were analyzed. The processes of phase transition in a flat layer of selective and gray absorbing media and emitting media were compared, and their fundamental differences were shown.

  12. Damping Performance of Taut Cables with Passive Absorbers Incorporating Inerters

    NASA Astrophysics Data System (ADS)

    Luo, Jiannan; Jiang, Jason Zheng; Macdonald, John H. G.

    2016-09-01

    As stay cables are prone to vibrations due to their low inherent damping, a common method to limit unwanted vibrations is to install a viscous damper normal to the cable near one of its supports. This paper investigates the potential performance improvement that can be delivered by a numbers of candidate absorbers that incorporate inerters. The inerter device is the true network dual of a spring, with the property that the force is proportional to the relative acceleration between its two terminals. A finite element taut cable model is used for this study. A specific cost function indicating the damping performance of a cable with an absorber attached is proposed. An optimisation of the performance is then carried out. Based on optimisation results, the best damping performance for each of the candidate absorber structures against a specific range of inertance values is presented.

  13. Scattering Properties of Heterogeneous Mineral Particles with Absorbing Inclusions

    NASA Technical Reports Server (NTRS)

    Dlugach, Janna M.; Mishchenko, Michael I.

    2015-01-01

    We analyze the results of numerically exact computer modeling of scattering and absorption properties of randomly oriented poly-disperse heterogeneous particles obtained by placing microscopic absorbing grains randomly on the surfaces of much larger spherical mineral hosts or by imbedding them randomly inside the hosts. These computations are paralleled by those for heterogeneous particles obtained by fully encapsulating fractal-like absorbing clusters in the mineral hosts. All computations are performed using the superposition T-matrix method. In the case of randomly distributed inclusions, the results are compared with the outcome of Lorenz-Mie computations for an external mixture of the mineral hosts and absorbing grains. We conclude that internal aggregation can affect strongly both the integral radiometric and differential scattering characteristics of the heterogeneous particle mixtures.

  14. Gas compressor with side branch absorber for pulsation control

    SciTech Connect

    Harris, Ralph E.; Scrivner, Christine M.; Broerman, III, Eugene L.

    2011-05-24

    A method and system for reducing pulsation in lateral piping associated with a gas compressor system. A tunable side branch absorber (TSBA) is installed on the lateral piping. A pulsation sensor is placed in the lateral piping, to measure pulsation within the piping. The sensor output signals are delivered to a controller, which controls actuators that change the acoustic dimensions of the SBA.

  15. Experimental dermatoplasty of skin defects with an absorbable bioplastic preparation.

    PubMed

    Bornemisza, G; Ladányi, J; Mikó, I

    1979-01-01

    Experimental dermatoplasty was performed with fibrin sponge preparation in the rabbit, during the course of which the whole skin thickness was substituted. The fibrin sponge was fixed to the skin-edges with surgical adhesive. The gradually absorbed fibrin was replaced by the migrating epithelium such that epithelization developed gradually. In special cases this method can be recommended for clinical purposes.

  16. Polymers used to absorb fats and oils: A concept

    NASA Technical Reports Server (NTRS)

    Marsh, H. E., Jr.

    1974-01-01

    One approach to problem of excessive oils and fats is to develop method by which oil is absorbed into solid mixture for elimination as solid waste. Materials proposed for these purposes are cross-linked (network) polymers that have high affinity for aliphatic substances, i. e., petroleum, animal, and vegetable oils.

  17. Absorber Materials for Transition-Edge Sensor X-ray Microcalorimeters

    NASA Technical Reports Server (NTRS)

    Brown, Ari-David; Bandler, Simon; Brekosky, Regis; Chervenak, James; Figueroa-Feliciano, Enectali; Finkbeiner, Fred; Sadleir, Jack; Iyomoto, Naoko; Kelley, Richard; Kilbourne, Caroline; Porter, F. Scott; Smith, Stephen; Saab, Tarek; Sadleir, Jac,

    2007-01-01

    Arrays of superconducting transition-edge sensors (TES) can provide high spatial and energy resolution necessary for x-ray astronomy. High quantum efficiency and uniformity of response can be achieved with a suitable absorber material, in which absorber x-ray stopping power, heat capacity, and thermal conductivity are relevant parameters. Here we compare these parameters for bismuth and gold. We have fabricated electroplated gold, electroplated gold/electroplated bismuth, and evaporated gold/evaporated bismuth 8x8 absorber arrays and find that a correlation exists between the residual resistance ratio (RRR) and thin film microstructure. This finding indicates that we can tailor absorber material conductivity via microstructure alteration, so as to permit absorber thermalization on timescales suitable for high energy resolution x-ray microcalorimetry. We show that by incorporating absorbers possessing large grain size, including electroplated gold and electroplated gold/electroplated bismuth, into our current Mo/Au TES, devices with tunable heat capacity and energy resolution of 2.3 eV (gold) and 2.1 eV (gold/bismuth) FWHM at 6 keV have been fabricated.

  18. Device for absorbing mechanical shock

    DOEpatents

    Newlon, C.E.

    1979-08-29

    This invention is a comparatively inexpensive but efficient shock-absorbing device having special application to the protection of shipping and storage cylinders. In a typical application, two of the devices are strapped to a cylinder to serve as saddle-type supports for the cylinder during storage and to protect the cylinder in the event it is dropped during lifting or lowering operations. In its preferred form, the invention includes a hardwood plank whose grain runs in the longitudinal direction. The basal portion of the plank is of solid cross-section, whereas the upper face of the plank is cut away to form a concave surface fittable against the sidewall of a storage cylinder. The concave surface is divided into a series of segments by transversely extending, throughgoing relief slots. A layer of elastomeric material is positioned on the concave face, the elastomer being extrudable into slots when pressed against the segments by a preselected pressure characteristic of a high-energy impact. The compressive, tensile, and shear properties of the hardwood and the elastomer are utilized in combination to provide a surprisingly high energy-absorption capability.

  19. Device for absorbing mechanical shock

    DOEpatents

    Newlon, Charles E.

    1980-01-01

    This invention is a comparatively inexpensive but efficient shock-absorbing device having special application to the protection of shipping and storage cylinders. In a typical application, two of the devices are strapped to a cylinder to serve as saddle-type supports for the cylinder during storage and to protect the cylinder in the event it is dropped during lifting or lowering operations. In its preferred form, the invention includes a hardwood plank whose grain runs in the longitudinal direction. The basal portion of the plank is of solid cross-section, whereas the upper face of the plank is cut away to form a concave surface fittable against the sidewall of a storage cylinder. The concave surface is divided into a series of segments by transversely extending, throughgoing relief slots. A layer of elastomeric material is positioned on the concave face, the elastomer being extrudable into slots when pressed against the segments by a preselected pressure characteristic of a high-energy impact. The compressive, tensile, and shear properties of the hardwood and the elastomer are utilized in combination to provide a surprisingly high energy-absorption capability.

  20. Community Capacity Building

    PubMed Central

    Goytia, Crispin N.; Todaro-Rivera, Lea; Brenner, Barbara; Shepard, Peggy; Piedras, Veronica; Horowitz, Carol

    2013-01-01

    Background: Successful community–academic research partnerships require building the capacity of both community-based organizations (CBOs) and academics to conduct collaborative research of mutual interest and benefit. Yet, information about the needs and goals of research-interested CBOs is lacking. Our partnership aimed to conduct a community research needs assessment and to use results to develop future capacity-building programs for CBOs. Methods: Based on our review of the literature, informal interviews with research-interested CBOs and community-engaged research groups locally and nationally, we developed a needs assessment survey. Key domains of this survey included history and experience with research collaboration, interest in specific research topics, and preference for learning format and structure. We trained community health workers (CHWs) to recruit senior leaders from CBOs in New York City (NYC) and encourage them to complete an on-line survey. Results: Fully 54% (33/61) of CBOs completed the needs assessment. Most (69%) reported involvement with research or evaluation in the last 2 years and 33% had some funding for research. Although 75% had collaborated with academic institutions in the past, 58% did not rate this experience well. The four areas respondents prioritized for skills building were program evaluation, developing needs assessments, building surveys, and understanding statistical analyses. They were less interested in learning to build collaborations with academics. Conclusions: A formal needs assessment of research training and educational needs of CBOs revealed that most had experience, albeit negative, with academic collaborations. CBO leaders wanted to build skills to conduct and analyze assessments and program evaluations. Our community–academic partnership is using these findings to develop a research capacity-building course. Other partnerships should consider conducting such assessments to transform the capacity of CBOs to

  1. The cupric ion reducing antioxidant capacity and polyphenolic content of some herbal teas.

    PubMed

    Apak, Reşat; Güçlü, Kubilay; Ozyürek, Mustafa; Esin Karademir, Saliha; Erçağ, Erol

    2006-01-01

    The total antioxidant capacity of the aqueous extracts of some endemic herbs-prepared as infusions by steeping these herbs in hot water--was assayed with bis(neocuproine)copper(II) chloride, also known as the cupric ion reducing antioxidant capacity (CUPRAC) reagent, which was easily accessible, rapid, stable and responsive to both hydrophilic and lipophilic antioxidants. The highest antioxidant capacities of some herbal teas available in the Turkish market were observed for scarlet pimpernel (Anagallis arvensis), sweet basil (Ocimum basilicum), green tea (Camellia sinensis) and lemon balm (Melissa officinalis), in this order (1.63, 1.18, 1.07, and 0.99 mmol trolox equivalent (TR)/g, respectively). For infusions prepared from ready-to-use tea bags, the CUPRAC values were highest for Ceylon blended ordinary tea (4.41), green tea with lemon (1.61), English breakfast ordinary tea (1.26) and green tea (0.94), all of which were manufactured types of C. sinensis. Following the strongest antioxidant herbs with capacities close to or slightly exceeding 1.0 mmol TR/g, sage, thyme, coriander, coltsfoot, blackberry and immortelle (Helichrysum) exhibited capacities around 0.5 mmol TR/g. The correlation of the Folin total phenolic content of herbal teas with their CUPRAC and ABTS (2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt) total antioxidant capacities gave linear curves with correlation coefficients of 0.966 and 0.936, respectively, showing that the CUPRAC assay results better correlated with total phenolic content of herbal teas. Absorbance versus concentration data at different dilutions and upon standard additions of model antioxidant compounds (trolox and quercetin) to herbal tea infusions showed that the absorbances (at 450 nm of the CUPRAC method) due to different antioxidant compounds in herbal tea infusions were additive; that is, the tested antioxidants did not chemically interact to cause apparent deviations from Beer's law.

  2. The changes in optical absorbance of ZrO2 thin film with the rise of the absorbed dose

    NASA Astrophysics Data System (ADS)

    Abayli, D.; Baydogan, N.

    2016-03-01

    In this study, zirconium oxide (ZrO2) thin film samples prepared by sol-gel method were irradiated using Co-60 radioisotope as gamma source. Then, it was investigated the ionizing effect on optical properties of ZrO2 thin film samples with the rise of the absorbed dose. The changes in the optical absorbance of ZrO2 thin films were determined by using optical transmittance and the reflectance measurements in the range between 190 - 1100 nm obtained from PG Instruments T80 UV-Vis spectrophotometer.

  3. Converting to DEA/MDEA mix ups sweetening capacity

    SciTech Connect

    Spears, M.L.; Hagan, K.M.; Bullin, J.A.; Michalik, C.J.

    1996-08-12

    Mixing amines can be the best method for increasing capacity or improving efficiency in an amine sweetening unit. In many cases, it may be possible simply to add a second amine to the existing solution on the fly, or as the unit is running. Union Pacific Resources` Bryan, Tex., gas plant provides one example. The plant was converted from diethanolamine (DEA) to a DEA/MDEA (methyl DEA) mixture after analysis by TSWEET, a process-simulation program. After conversion, CO{sub 2} levels in the sales gas fell to less than pipeline specifications. Data were taken for the absorber at a constant amine circulation of 120 gpm. A comparison of the performance data to the values calculated by the program proved the accuracy of TSWEET. The conversion and performance of the plant are described.

  4. Absorbencies of six different rodent beddings: commercially advertised absorbencies are potentially misleading.

    PubMed

    Burn, C C; Mason, G J

    2005-01-01

    Moisture absorbency is one of the most important characteristics of rodent beddings for controlling bacterial growth and ammonia production. However, bedding manufacturers rarely provide information on the absorbencies of available materials, and even when they do, absorption values are usually expressed per unit mass of bedding. Since beddings are usually placed into cages to reach a required depth rather than a particular mass, their volumetric absorbencies are far more relevant. This study therefore compared the saline absorbencies of sawdust, aspen woodchips, two virgin loose pulp beddings (Alpha-Dri and Omega-Dri), reclaimed wood pulp (Tek-Fresh), and corncob, calculated both by volume and by mass. Absorbency per unit volume correlated positively with bedding density, while absorbency per unit mass correlated negatively. Therefore, the relative absorbencies of the beddings were almost completely reversed depending on how absorbency was calculated. By volume, corncob was the most absorbent bedding, absorbing about twice as much saline as Tek-Fresh, the least absorbent bedding. Conversely, when calculated by mass, Tek-Fresh appeared to absorb almost three times as much saline as the corncob. Thus, in practical terms the most absorbent bedding here was corncob, followed by the loose pulp beddings; and this is generally supported by their relatively low ammonia production as seen in previous studies. Many factors other than absorbency determine whether a material is suitable as a rodent bedding, and they are briefly mentioned here. However, manufacturers should provide details of bedding absorbencies in terms of volume, in order to help predict the relative absorbencies of the beddings in practical situations.

  5. Nano-porous-water Absorbents for Solid-absorbebt Heat Pump System

    NASA Astrophysics Data System (ADS)

    Mizota, Tadato; Nakayama, Noriaki

    Zeolite-water heat-pump system has been developed in these 25 years. Recently, an instant beer-cooling system has appeared by using the zeolite heat pump system as a commercial product. It takes so long time for the development since the first proposal. The most serious problem through the development has been of the ability of absorbents. Themaximum heat exchange capacity to date exceeds 1MJ•kg-1 for Mg89-A, which is comparable to the energy storage capacity of modern alkaline-ion batteries in weight-bases. But it needs high temperature heat sources more than 200°C for the activation. Absorbents useful at lower temperatures are thus desirable for effective use of various kinds of lower temperature heat sources Various nano-porous materials as well as zeolites now under investigation as candidates of heat-pump absorbents, such as silica-gels, allophane, imogolite, hydrotalcite, etc.

  6. An ultrathin dual-band metamaterial absorber

    NASA Astrophysics Data System (ADS)

    Zhang, Yong; Duan, Junping; Zhang, Wendong; Wang, Wanjun; Zhang, Binzhen

    2016-10-01

    The design and preparation of an ultrathin dual-band metamaterial absorber whose resonant frequency located at radar wave (20 GHz-60 GHz) is presented in this paper. The absorber is composed of a 2-D periodic sandwich featured with two concentric annuluses. The influence on the absorber's performance produced by resonant cell's structure size and material parameters was numerically simulated and analyzed based on the standard full wave finite integration technology in CST. Laser ablation process was adopted to prepare the designed absorber on epoxy resin board coated with on double plane of copper with a thickness that is 1/30 and 1/50 of the resonant wavelength at a resonant frequency of 30.51 GHz and 48.15 GHz. The full width at half maximum (FWHM) reached 2.2 GHz and 2.35 GHz and the peak of the absorptance reached 99.977%. The ultrathin absorber is nearly omnidirectional for all polarizations. The test results of prepared sample testify the designed absorber's excellent absorbing performance forcefully. The absorber expands inspirations of radar stealth in military domain due to its flexible design, cost-effective and other outstanding properties.

  7. 21 CFR 872.6050 - Saliva absorber.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Saliva absorber. 872.6050 Section 872.6050 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6050 Saliva absorber. (a) Identification. A...

  8. 21 CFR 872.6050 - Saliva absorber.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Saliva absorber. 872.6050 Section 872.6050 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6050 Saliva absorber. (a) Identification. A...

  9. Surface modification as an effective approach to enhance the microwave absorbing properties of hollow carbon spheres

    NASA Astrophysics Data System (ADS)

    Zhu, Hui-Ling; Xu, Zhen-Fu; Cui, Hong-Zhi; Wu, Jie; Dang, Jun-Fan; Wang, Tian-Fang; Zhang, Li-Dong

    2016-10-01

    The microwave absorbing properties of hollow carbon spheres modified by KOH were measured using a transmission/reflection coaxial method in the range of 2-18 GHz. The modification could result in a significant enhancement in the properties, including both the increment in absorbing intensity and bandwidth and the decrease in absorber thickness, which can be well explained by the high concentration of dangling bonds in per unit volume or per unit weight introduced during the modification. This dangling bond dominated mechanism could be used to instruct the design of absorbers with outstanding performances.

  10. Development of optical tool for the characterization of selective solar absorber tubes

    NASA Astrophysics Data System (ADS)

    Braillon, Julien; Stollo, Alessio; Delord, Christine; Raccurt, Olivier

    2016-05-01

    In the Concentrated Solar Power (CSP) technologies, selective solar absorbers, which have a cylindrical geometry, are submitted to strong environmental constraints. The degradation of their optical properties (total solar absorbance and total emittance) has a direct impact on the performances. In order to know optical properties of absorber tubes, we present in this article a new optical tool developed by our laboratory which fit onto commercial spectrometers. Total solar absorbance and total emittance are calculated from total reflectance spectra measured by UV-Vis and IR spectrophotometry. To verify and validate the measurement method, we performed a comparative study between flat and cylindrical samples with same surface properties.

  11. [Absorbed doses in dental radiology].

    PubMed

    Bianchi, S D; Roccuzzo, M; Albrito, F; Ragona, R; Anglesio, S

    1996-01-01

    The growing use of dento-maxillo-facial radiographic examinations has been accompanied by the publication of a large number of studies on dosimetry. A thorough review of the literature is presented in this article. Most studies were carried out on tissue equivalent skull phantoms, while only a few were in vivo. The aim of the present study was to evaluate in vivo absorbed doses during Orthopantomography (OPT). Full Mouth Periapical Examination (FMPE) and Intraoral Tube Panoramic Radiography (ITPR). Measurements were made on 30 patients, reproducing clinical conditions, in 46 anatomical sites, with 24 intra- and 22 extra-oral thermoluminiscent dosimeters (TLDS). The highest doses were measured, in orthopantomography, at the right mandibular angle (1899 mu Gy) in FMPE on the right naso-labial fold (5640 mu Gy and in ITPR on the palatal surface of the left second upper molar (1936 mu Gy). Intraoral doses ranged from 21 mu Gy, in orthopantomography, to 4494 mu Gy in FMPE. Standard errors ranged from 142% in ITPR to 5% in orthopantomography. The highest rate of standard errors was found in FMPE and ITPR. The data collected in this trial are in agreement with others in major literature reports. Disagreements are probably due to different exam acquisition and data collections. Such differences, presented comparison in several sites, justify lower doses in FMPE and ITPR. Advantages and disadvantages of in vivo dosimetry of the maxillary region are discussed, the former being a close resemblance to clinical conditions of examination and the latter the impossibility of collecting values in depth of tissues. Finally, both ITPR and FMPE required lower doses than expected, and can be therefore reconsidered relative to their radiation risk.

  12. Introducing hepatitis B virus vaccine into the Expanded Programme on Immunization in Bangladesh: a proposed method to evaluate whether the existing infrastructure has the capacity.

    PubMed

    Trama, Annalisa; Walker, Damian; Fox-Rushby, Julia

    2005-03-01

    To determine whether the existing Expanded Programme on Immunization (EPI) in Bangladesh has the capacity to introduce the hepatitis B virus (HBV) vaccine, this study was carried out in all the nine health facilities, which maintain a cold-chain, in Chandpur district of Bangladesh. The research, focusing specifically on cold-chain equipment, aimed at developing and applying an indicator of the use of cold-chain equipment. A structured questionnaire, developed and field-tested, was used for collecting information on cold-chain equipment and their use-rate. Data were used for estimating the resources needed to introduce the HBV vaccine and for increasing the coverage of measles and DPT vaccines. The findings of the study showed that the use-rate of cold-chain equipment in this district was low, suggesting that the district has sufficient spare capacity to introduce and sustain the storage of an increased quantity of vaccines. This paper suggests an approach to study capacity in relation to infrastructural facilities. By measuring the capacity of capital equipment, the study has illustrated that the measurement of resource-use rates provides useful information about the burden that a new vaccine places on the EPI.

  13. Measurement of in-plane thermal conductivity and heat capacity of separator in Li-ion cells using a transient DC heating method

    NASA Astrophysics Data System (ADS)

    Vishwakarma, V.; Jain, A.

    2014-12-01

    The separator is a critical, multi-functional component of a Li-ion cell that plays a key role in performance and safety during energy conversion and storage processes. Heat flow through the separator is important for minimizing cell temperature and avoiding thermal runaway. Despite the critical nature of thermal conduction through the separator, very little research has been reported on understanding and measuring the thermal conductivity and heat capacity of the separator. This paper presents first-ever measurements of thermal conductivity and heat capacity of the separator material. These measurements are based on thermal response to an imposed DC heating within a time period during which an assumption of a thermally semi-infinite domain is valid. Experimental data are in excellent agreement with the analytical model. Comparison between the two results in measurement of the in-plane thermal conductivity and heat capacity of the separator. Results indicate very low thermal conductivity of the separator. Measurements at an elevated temperature indicate that thermal conductivity and heat capacity do not change much with increasing temperature. Experimental measurements of previously unavailable thermal properties reported here may facilitate a better fundamental understanding of thermal transport in a Li-ion cell, and enhanced safety due to more accurate thermal prediction.

  14. Diesel NO{sub x} reduction by plasma-regenerated absorbent beds

    DOEpatents

    Wallman, P.H.; Vogtlin, G.E.

    1998-02-10

    Reduction of NO{sub x} from diesel engine exhaust by use of plasma-regenerated absorbent beds is described. This involves a process for the reduction of NO{sub x} and particulates from diesel engines by first absorbing NO{sub x} onto a solid absorbent bed that simultaneously acts as a physical trap for the particulate matter, and second regenerating said solid absorbent by pulsed plasma decomposition of absorbed NO{sub x} followed by air oxidation of trapped particulate matter. The absorbent bed may utilize all metal oxides, but the capacity and the kinetics of absorption and desorption vary between different materials, and thus the composition of the absorbent bed is preferably a material which enables the combination of NO{sub x} absorption capability with catalytic activity for oxidation of hydrocarbons. Thus, naturally occurring or synthetically prepared materials may be utilized, particularly those having NO{sub x} absorption properties up to temperatures around 400 C which is in the area of diesel engine exhaust temperatures. 1 fig.

  15. Fluid control in microfluidic devices using a fluid conveyance extension and an absorbent microfluidic flow modulator.

    PubMed

    Yuen, Po Ki

    2013-05-07

    This article presents a simple method for controlling fluid in microfluidic devices without the need for valves or pumps. A fluid conveyance extension is fluidly coupled to the enclosed outlet chamber of a microfluidic device. After a fluid is introduced into the microfluidic device and saturates the fluid conveyance extension, a fluid flow in the microfluidic device is generated by contacting an absorbent microfluidic flow modulator with the fluid conveyance extension to absorb the fluid from the fluid conveyance extension through capillary action. Since the fluid in the microfluidic device is fluidly coupled with the fluid conveyance extension and the fluid conveyance extension is fluidly coupled with the absorbent microfluidic flow modulator, the absorption rate of the absorbent microfluidic flow modulator, which is the rate at which the absorbent microfluidic flow modulator absorbs fluid, matches the fluid flow rate in the microfluidic device. Thus, the fluid flow rate in the microfluidic device is set by the absorption rate of the absorbent microfluidic flow modulator. Sheath flow and fluid switching applications are demonstrated using this simple fluid control method without the need for valves or pumps. Also, the ability to control the fluid flow rate in the microfluidic device is demonstrated using absorbent microfluidic flow modulators with various absorbent characteristics and dimensions.

  16. Acoustic metamaterial panels based on multi frequency vibration absorbers

    NASA Astrophysics Data System (ADS)

    Shi, Chao; Sun, Hongwei; Hu, Xiaolei; Gu, Jinliang

    2016-04-01

    Presented here is a new metamaterial panel based on multi-frequency vibration absorbers for broadband vibration absorption. The proposed metamaterial panel consists of a uniform isotropic panel and small two-mass spring-mass-damper subsystem many locations along the panel to act as multi-frequency vibration absorbers. The existence of two stopbands is demonstrated using a model based on averaging material properties over a cell length and a model based on finite element modeling and the Bloch-Floquet theory for periodic structures. For a finite metamaterial panel, because these two idealized models can not be used for finite panels and/or elastic waves having short wavelengths, a finite-element method is used for detailed modeling and analysis. The concepts of negative effective stiffness is explained in detail. For an incoming wave with a frequency in one of the two stopbands, the absorbers are excited to vibrate in their optical modes to create shear forces to straighten the panel and stop the wave propagation. For an incoming wave with a frequency outside of but between the two stopbands, it can be efficiently damped out by the damper with these mass of each absorber. Hence, the two stopbands are connected in to a wide stopband. Numerical examples validate the concept and show that the structures boundary conditions do not have significant influence on the absorption of high-frequency waves. However, for absorption of low-frequency waves, the structures boundary conditions and resonance frequencies and the location and spatial distribution of absorbers need to be considered in design, and it is better to use heavier masses for absorbers.

  17. Passive Vibration Reduction with Silicone Springs and Dynamic Absorber

    NASA Astrophysics Data System (ADS)

    Lee, Ji-hoon; Dong, Yanlu; Lee, Moon G.

    In the precision manufacturing field, the major structural components are often made of rigid and massive elements. Those mechanisms are so fluctuated by swaying of building and resonating of ground floor that the precision gets lower. As a result, quality of products is declined. So far, to minimize the influences of result from external irregular vibration, various technical methods of the absorbing vibration are used. For example, vibration isolation table which use air damper and heavy granite surface plate are used. But, these devices need high cost and low mobility. In this paper, our target is to analyze the external vibration and then to develop a mechanism which is able to reduce the effect. It is also able to be produced at a lower cost. Firstly, a silicone support is proposed as a simple vibration isolating mechanism. Swaying and resonating of a building have 2∼4 Hz vibrating frequency when a person is running on a treadmill, similar phenomena happen. Therefore, the supports are mounted under the running pad of a treadmill. This is a passive vibration isolator. The support is designed to have low stiffness and high deformation to isolate and absorb the vibration. As a result, it reduces the peak amplitude of vibration by about 80%. Secondly, a dynamic vibration absorber is developed to minimize the repetitive vibration. The absorber has a fundamental resonating frequency by its spring and mass. The resonating frequency is designed to have close value to the vibrating frequency of the treadmill. The length of beam can be adjusted to have variable resonance according to the external vibration. This absorber also reduces vibration by 84%. The passive vibration isolator and dynamic vibration absorber can be applied to precision equipments with repetitive motion or with disturbance of swaying of building.

  18. Design of a nonlinear torsional vibration absorber

    NASA Astrophysics Data System (ADS)

    Tahir, Ammaar Bin

    Tuned mass dampers (TMD) utilizing linear spring mechanisms to mitigate destructive vibrations are commonly used in practice. A TMD is usually tuned for a specific resonant frequency or an operating frequency of a system. Recently, nonlinear vibration absorbers attracted attention of researchers due to some potential advantages they possess over the TMDs. The nonlinear vibration absorber, or the nonlinear energy sink (NES), has an advantage of being effective over a broad range of excitation frequencies, which makes it more suitable for systems with several resonant frequencies, or for a system with varying excitation frequency. Vibration dissipation mechanism in an NES is passive and ensures that there is no energy backflow to the primary system. In this study, an experimental setup of a rotational system has been designed for validation of the concept of nonlinear torsional vibration absorber with geometrically induced cubic stiffness nonlinearity. Dimensions of the primary system have been optimized so as to get the first natural frequency of the system to be fairly low. This was done in order to excite the dynamic system for torsional vibration response by the available motor. Experiments have been performed to obtain the modal parameters of the system. Based on the obtained modal parameters, the design optimization of the nonlinear torsional vibration absorber was carried out using an equivalent 2-DOF modal model. The optimality criterion was chosen to be maximization of energy dissipation in the nonlinear absorber attached to the equivalent 2-DOF system. The optimized design parameters of the nonlinear absorber were tested on the original 5-DOF system numerically. A comparison was made between the performance of linear and nonlinear absorbers using the numerical models. The comparison showed the superiority of the nonlinear absorber over its linear counterpart for the given set of primary system parameters as the vibration energy dissipation in the former is

  19. Characteristics of a broad band and thin ferrite absorbing wall

    NASA Astrophysics Data System (ADS)

    Kotsuka, Youji

    The author proposes a method of reducing the thickness of a ferrite absorbing wall and controlling the matching frequency characteristics by applying a DC magnetic field, HDC, perpendicularly to the microwave magnetic field. The matching characteristics of this method are investigated in detail on the basis of experimental data. The thickness reduction of the absorbing is first discussed from the standpoint of scalar permeability. Based upon these investigations, a thinned ferrite absorbing wall has been designed on a trial basis. The synthetic wave-absorbing material consists of a ferrite disk backed with a samarium-cobalt magnetic material generating a static magnetic field. Fairly good VSWR (voltage standing wave ratio) characteristics below 1.2 have been obtained with a total thickness of 3.8 mm in the frequency range from VHF to UHF. As an application of these characteristics, by controlling both the ferrite thickness and DC magnetic field simultaneously, it has been clarified that the matching frequency characteristics are easily exchanged in the broad frequency region.

  20. Prediction of trapping rates in mixtures of partially absorbing spheres

    NASA Astrophysics Data System (ADS)

    Kansal, Anuraag R.; Torquato, Salvatore

    2002-06-01

    The combined effects of diffusion and reaction in heterogeneous media govern the behavior of a wide variety of physical and biological phenomena, including the consumption of nutrients by cells and the study of magnetic relaxation in tissues. We have considered the so-called "trapping problem," in which diffusion takes place exterior to a collection of fixed traps while reaction occurs at their surface. A simulation technique for predicting the overall trapping rate for systems of partially absorbing spherical traps based on the first-passage spheres method is presented. Using data obtained by applying this simulation technique, we then consider the problem of mixtures of partially absorbing traps. By hypothesizing a method for reducing a general mixture of traps to a mixture of perfect absorbers and perfect reflectors (i.e., reducing the dimensionality of the space of variables), we are able to accurately predict the effective surface rate constant and the trapping rate for an arbitrary mixture of partially absorbing traps. Remarkably, we find that a single, nearly universal curve allows accurate predictions to be made over a wide range of trap volume fractions and even for different trap distributions.

  1. Side branch absorber for exhaust manifold of two-stroke internal combustion engine

    SciTech Connect

    Harris, Ralph E; Broerman, III, Eugene L.; Bourn, Gary D

    2011-01-11

    A method of improving scavenging operation of a two-stroke internal combustion engine. The exhaust pressure of the engine is analyzed to determine if there is a pulsation frequency. Acoustic modeling is used to design an absorber. An appropriately designed side branch absorber may be attached to the exhaust manifold.

  2. [Research progress on environmental carrying capacity].

    PubMed

    Wang, Jian; Sun, Tieheng; Li, Peijun; Li, Fayun

    2005-04-01

    To study the theories and quantification methods of environmental carrying capacity is of significance in reality for directing human beings economic behaviors and harmonizing the relationships between social development and environment. In this paper, the definition of environmental carrying capacity was introduced from the aspects of "capacity", "threshold" and "capability", with the main characteristics of objective and subjective, regional and temporal, and dynamic and adjustable, and its research progress was reviewed. On the basis of these, the quantification methods of environmental carrying capacity, including exponential assessment, carrying rate assessment, system dynamics, and multi-objective optimization, were analyzed, and the research perspectives of environmental carrying capacity were discussed.

  3. Thin film absorber for a solar collector

    DOEpatents

    Wilhelm, William G.

    1985-01-01

    This invention pertains to energy absorbers for solar collectors, and more particularly to high performance thin film absorbers. The solar collectors comprising the absorber of this invention overcome several problems seen in current systems, such as excessive hardware, high cost and unreliability. In the preferred form, the apparatus features a substantially rigid planar frame with a thin film window bonded to one planar side of the frame. An absorber in accordance with the present invention is comprised of two thin film layers that are sealed perimetrically. In a preferred embodiment, thin film layers are formed from a metal/plastic laminate. The layers define a fluid-tight planar envelope of large surface area to volume through which a heat transfer fluid flows. The absorber is bonded to the other planar side of the frame. The thin film construction of the absorber assures substantially full envelope wetting and thus good efficiency. The window and absorber films stress the frame adding to the overall strength of the collector.

  4. Blue CrO5 assay: a novel spectrophotometric method for the evaluation of the antioxidant and oxidant capacity of various biological substances.

    PubMed

    Charalampidis, Pavlos S; Veltsistas, Panos; Karkabounas, Spyros; Evangelou, Angelos

    2009-10-01

    Oxidative stress plays a pivotal role in the ageing process and in the pathogenesis of numerable diseases. The quantification of the phenomenon is of paramount importance. In the present study, we introduce a novel and simple assay, the Blue CrO(5) assay, for the evaluation of the oxidant and antioxidant capacity of various biological samples and known antioxidants. Chromium peroxide (CrO(5)) is produced by ammonium dichromate in an acidic environment in the presence of H(2)O(2). It is a deep blue potent oxidant compound, miscible and relatively stable in polar organic solvents, that can be easily measured by spectrophotometry. Its reduction by known antioxidants, both water- and lipid-soluble (ascorbate and alpha-tocopherol, respectively, in this study), detected spectrophotometrically as a decrease in the absorption and depicted in EPR spectra, can act as a measure of the antioxidant capacity of a certain compound. The assay displays significant sensitivity, stability, linearity, specificity and repeatability.

  5. Efficacy of an improved absorbent pad on incontinence-associated dermatitis in older women: cluster randomized controlled trial

    PubMed Central

    2012-01-01

    Background Most older adults with urinary incontinence use absorbent pads. Because of exposure to moisture and chemical irritating substances in urine, the perineal skin region is always at risk for development of incontinence-associated dermatitis (IAD). The aim of this study was to examine the efficacy of an improved absorbent pad against IAD. Methods A cluster randomized controlled design was used to compare the efficacy of two absorbent pads. Female inpatients aged ≥65 years who had IAD and used an absorbent pad or diaper all day were enrolled. Healing rate of IAD and variables of skin barrier function such as skin pH and skin moisture were compared between the usual absorbent pad group (n = 30) and the test absorbent pad group (n = 30). Results Thirteen patients (43.3%) from the test absorbent pad group and 4 patients (13.3%) from the usual absorbent pad group recovered completely from IAD. Moreover, the test absorbent pad group healed significantly faster than the usual absorbent pad group (p = 0.009). On the other hand, there were no significant differences between the two groups in skin barrier function. Conclusion The test absorbent pad for older adults with urinary incontinence might be more efficacious against IAD than usual absorbent pad. Trial registration UMIN-CTR: UMIN000006188 PMID:22642800

  6. Absorbed dose from traversing spherically symmetric, Gaussian radioactive clouds

    SciTech Connect

    Thompson, J.M. ); Poston, J.W. . Dept. of Nuclear Engineering)

    1999-06-01

    If a large radioactive cloud is produced, sampling may require that an airplane traverse the cloud. A method to predict the absorbed dose to the aircrew from penetrating the radioactive cloud is needed. Dose rates throughout spherically symmetric Gaussian clouds of various sizes, and the absorbed doses from traversing the clouds, were calculated. Cloud size is a dominant parameter causing dose to vary by orders of magnitude for a given dose rate measured at some distance. A method to determine cloud size, based on dose rate readings at two or more distances from the cloud center, was developed. This method, however, failed to resolve the smallest cloud sizes from measurements made at 1,000 m to 2,000 m from the cloud center.

  7. Effect of heat on the adsorption capacity of an activated carbon for decolorizing/deodorizing yellow zein.

    PubMed

    Sessa, D J; Palmquist, D E

    2008-09-01

    The Freundlich model was evaluated for use to assess the effect of heat on the adsorption capacity of an activated carbon for decolorizing/deodorizing corn zein. Because zein protein and its color/odor components are all adsorbed by activated carbon, a method to monitor their removal was needed. Yellow color is due to xanthophylls; a contributor to off-odor is diferuloylputrescine. The off-odor component absorbs ultraviolet (UV) light at about 325 nm and its removal coincides with removal of yellow color. A spectrophotometric method based on UV absorbances 280 nm for protein and 325 nm for the off-odor component was used to monitor their adsorptions onto activated carbon. Equilibrium studies were performed over temperature range from 25 to 60 degrees C for zein dissolved in 70% aqueous ethanol. Runs made at 55 degrees C adsorbed significantly more of the color/odor components than the protein.

  8. Creating a Multiband Perfect Metamaterial Absorber at K Frequency Band Using Defects in the Structure

    NASA Astrophysics Data System (ADS)

    Tran, Manh Cuong; Nguyen, Thi Thuy; Ho, Tuan Hung; Do, Hoang Tung

    2017-01-01

    We present a simple method to achieve a multiband perfect metamaterial absorber for use in the K band by applying defects to the absorber structure. Open boundary conditions with an excitation port are used for simulation of the whole considered structure. A defect was then introduced into the structure to obtain multiband absorption. Two perfect absorption peaks were observed at 19.8 GHz and 23.1 GHz for the structure with a defect of 2 × 2 unit cells. The multiple resonance frequencies could be tuned by varying the defect dimensions. In addition, it was found that the absorber structure is insensitive to the polarization angle of the incident electromagnetic wave over a wide range due to the symmetry of the configuration. This represents a simpler method to create a multifrequency absorber compared with previous works. To the best of our knowledge, this is the first study considering the influence of structural defects on the absorption frequencies of a metamaterial absorber.

  9. Impact of structural heterogeneity in solar absorber layers (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Toney, Michael

    2016-09-01

    Impact of structural heterogeneity in solar absorber layers Michael F Toney SLAC National Accelerator Laboratory Structural and morphological heterogeneity is common in thin film and emerging solar cell absorber layers, including organic photovoltaic bulk heterojunctions (OPV BHJs), hybrid organic-inorganic perovskites (HOIP), and Cu2ZnSn(S,Se)4 (CZTSSe), and has a significant impact on the (opto)electronic heterogeneity and hence absorber properties. In this talk I will use X-ray based methods, including scattering and spectroscopies, to characterize and quantify the heterogeneity in OPV BHJs and HOIP absorber layers. The BHJ films are blends of the small molecule X2 and [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) where it has been established that there are three distinct region of the films - pure PC71BM, pure X2 and intimately mixed X2:PC71BM. This talk will show how the absolute concentration of the mixed phase can be used to explain the large PC71BM:X2 composition range where good performance is observed [1]. The talk will also show that spin cast CH3NH3PbI3 films consistent of both crystalline and amorphous regions, which can explain previous heterogeneity in the PL imaging [2]. [1] Huang et al., Adv. Energy Mater. 4, 1301886 (2014). [2] deQuilettes et al., Science 348, 683 (2015).

  10. Molecular dynamic simulations of the water absorbency of hydrogels.

    PubMed

    Ou, Xiang; Han, Qiang; Dai, Hui-Hui; Wang, Jiong

    2015-09-01

    A polymer gel can imbibe solvent molecules through surface tension effect. When the solvent happens to be water, the gel can swell to a large extent and forms an aggregate called hydrogel. The large deformation caused by such swelling makes it difficult to study the behaviors of hydrogels. Currently, few molecular dynamic simulation works have been reported on the water absorbing mechanism of hydrogels. In this paper, we first use molecular dynamic simulation to study the water absorbing mechanism of hydrogels and propose a hydrogel-water interface model to study the water absorbency of the hydrogel surface. Also, the saturated water content and volume expansion rate of the hydrogel are investigated by building a hydrogel model with different cross-linking degree and by comparing the water absorption curves under different temperatures. The sample hydrogel model used consists of Polyethylene glycol diglycidyl ether (PEGDGE) as epoxy and the Jeffamine, poly-oxy-alkylene-amines, as curing agent. The conclusions obtained are useful for further investigation on PEGDGE/Jeffamine hydrogel. Moreover, the simulation methods, including hydrogel-water interface modeling, we first propose are also suitable to study the water absorbing mechanism of other hydrogels.

  11. Recycling of waste tyre rubber into oil absorbent.

    PubMed

    Wu, B; Zhou, M H

    2009-01-01

    The abundant and indiscriminant disposal of waste tyres has caused both health and environmental problems. In this work, we provide a new way to dispose off waste tyres by reusing the waste tyre rubber (WTR) for oil absorptive material production. To investigate this feasibility, a series of absorbents were prepared by graft copolymerization-blending method, using waste tyre rubber and 4-tert-butylstyrene (tBS) as monomers. Divinylbenzene (DVB) and benzoyl peroxide (BPO) were employed as crosslinker and initiator, respectively. The existence of graft-blends (WTR-g-tBS) was determined by FTIR spectrometry and verified using thin-layer chromatography (TLC). In addition, the thermal properties of WTR-g-tBS were confirmed by a thermogravimetric analyzer (TGA). Oil absorbency of the grafted-blends increased with increases in either feed ratio of WTR to tBS or DVB concentration. This absorbency reached a maximum of 24.0gg(-1) as the feed ratio and DVB concentration were 60/40 and 1wt%, respectively, after which it decreased. At other ratios and concentrations the absorbency decreased. The gel fraction of grafted-blends increased with increasing concentration of DVB. Oil-absorption processes in pure toluene and crude oil diluted with toluene were found to adhere to first-order absorption kinetics. Furthermore, the oil-absorption rate in diluted crude oil was observed to be lower than pure toluene.

  12. Electromagnetic Wave Absorbing Properties of Amorphous Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Zhao, Tingkai; Hou, Cuilin; Zhang, Hongyan; Zhu, Ruoxing; She, Shengfei; Wang, Jungao; Li, Tiehu; Liu, Zhifu; Wei, Bingqing

    2014-07-01

    Amorphous carbon nanotubes (ACNTs) with diameters in the range of 7-50 nm were used as absorber materials for electromagnetic waves. The electromagnetic wave absorbing composite films were prepared by a dip-coating method using a uniform mixture of rare earth lanthanum nitrate doped ACNTs and polyvinyl chloride (PVC). The microstructures of ACNTs and ACNT/PVC composites were characterized using transmission electron microscope and X-ray diffraction, and their electromagnetic wave absorbing properties were measured using a vector-network analyzer. The experimental results indicated that the electromagnetic wave absorbing properties of ACNTs are superior to multi-walled CNTs, and greatly improved by doping 6 wt% lanthanum nitrate. The reflection loss (R) value of a lanthanum nitrate doped ACNT/PVC composite was -25.02 dB at 14.44 GHz, and the frequency bandwidth corresponding to the reflector loss at -10 dB was up to 5.8 GHz within the frequency range of 2-18 GHz.

  13. Electromagnetic wave absorbing properties of amorphous carbon nanotubes.

    PubMed

    Zhao, Tingkai; Hou, Cuilin; Zhang, Hongyan; Zhu, Ruoxing; She, Shengfei; Wang, Jungao; Li, Tiehu; Liu, Zhifu; Wei, Bingqing

    2014-07-10

    Amorphous carbon nanotubes (ACNTs) with diameters in the range of 7-50 nm were used as absorber materials for electromagnetic waves. The electromagnetic wave absorbing composite films were prepared by a dip-coating method using a uniform mixture of rare earth lanthanum nitrate doped ACNTs and polyvinyl chloride (PVC). The microstructures of ACNTs and ACNT/PVC composites were characterized using transmission electron microscope and X-ray diffraction, and their electromagnetic wave absorbing properties were measured using a vector-network analyzer. The experimental results indicated that the electromagnetic wave absorbing properties of ACNTs are superior to multi-walled CNTs, and greatly improved by doping 6 wt% lanthanum nitrate. The reflection loss (R) value of a lanthanum nitrate doped ACNT/PVC composite was -25.02 dB at 14.44 GHz, and the frequency bandwidth corresponding to the reflector loss at -10 dB was up to 5.8 GHz within the frequency range of 2-18 GHz.

  14. Photothermal response of near-infrared-absorbing NanoGUMBOS.

    PubMed

    Dumke, Jonathan C; Qureshi, Ammar; Hamdan, Suzana; El-Zahab, Bilal; Das, Susmita; Hayes, Daniel J; Boldor, Dorin; Rupnik, Kresimir; Warner, Isiah M

    2014-01-01

    The photothermal properties of several near-infrared-absorbing nanoparticles derived from group of uniform materials based on organic salts (GUMBOS) and composed of cationic dyes coupled with biocompatible anions are evaluated. These nanoparticles were synthesized using a reprecipitation method performed at various pH values: 2.0, 5.0, 7.0, 9.0, and 11.0. The cations for the nanoparticles derived from GUMBOS (nanoGUMBOS), [1048] and [1061], have absorbance maxima at wavelengths overlapping with human soft tissue absorbance minima. Near-infrared-absorbing nanoGUMBOS excited with a 1064 nm continuous laser led to heat generation, with an average temperature increase of 20.4 ± 2.7 °C. Although the [1061][Deoxycholate] nanoGUMBOS generated the highest temperature increase (23.7 ± 2.4 °C), it was the least photothermally efficient compound (13.0%) due to its relatively large energy band gap of 0.892 eV. The more photothermally efficient compound [1048][Ascorbate] (64.4%) had a smaller energy band gap of 0.861 eV and provided an average photothermal temperature increase of 21.0 ± 2.1 °C.

  15. Absorbed fractions for alpha particles in ellipsoidal volumes

    NASA Astrophysics Data System (ADS)

    Amato, Ernesto; Italiano, Antonio; Baldari, Sergio

    2013-08-01

    Internal dosimetry of alpha particles is gaining attention due to the increasing applications in cancer treatment and also for the assessment of environmental contamination from radionuclides. We developed a Monte Carlo simulation in GEANT4 in order to calculate the absorbed fractions for monoenergetic alpha particles in the energy interval between 0.1 and 10 MeV, uniformly distributed in ellipsoids made of soft tissue. For each volume, we simulated a spherical shape, three oblate and three prolate ellipsoids, and one scalene shape. For each energy and for every geometrical configuration, an analytical relationship between the absorbed fraction and a ‘generalized radius’ was found; and the dependence of the fit parameters on the alpha energy is discussed and fitted by parametric functions. With the proposed formulation, the absorbed fraction for alpha particles in the energy range explored can be calculated for volumes and for ellipsoidal shapes of practical interest. This method can be applied to the evaluation of absorbed fraction from alpha-emitting radionuclides. The contribution to the deposited energy coming from electron and photon emissions can be accounted for exploiting the specific formulations previously introduced. As an example of application, the dosimetry of 213Bi and its decay chain in ellipsoids is reported.

  16. Cascaded Perforates as One-Dimensional, Bulk Absorbers

    NASA Technical Reports Server (NTRS)

    Parrott, T. L.; Jones, M. G.

    2006-01-01

    Porous cell honeycomb liners for aircraft engine nacelles offer the possibility of exploiting extended reaction effects to improve liner attenuation bandwidth as generally attributed to the performance of bulk absorbers. This paper describes an analytical procedure, starting with an impedance prediction model for a single perforated plate, to estimate the bulk-absorber parameters for a cascade of such perforates - a first step to modeling a porous wall honeycomb structure. The objective is to build confidence in a lumped element impedance model, when applied to a uniformly-spaced set of porous plates to predict its .bulk. absorber properties. The model is based upon a modified version of the two-parameter flow resistance model of the form A + BV(sub inc), where A and B are physics-based, semi-empirical parameters that are adjusted to provide an optimum fit to a composite dataset from three plate porosities of 2.5, 5 and 10%. The composite dataset is achieved by reformulating the two-parameter flow resistance model into a .reduced pressure drop coefficient. dependency on perforate hole Reynolds number. The resulting impedance model is employed to calculate surface impedance spectra for N and 2N-layer perforate cascades. The well-known two-thickness method for experimental determination of bulk-absorber parameters is then applied to these .synthesized. data sets to predict the characteristic impedance and propagation constant for the perforate cascades. These results are then compared with experimental results reported in a companion paper.

  17. Electromagnetic Wave Absorbing Properties of Amorphous Carbon Nanotubes

    PubMed Central

    Zhao, Tingkai; Hou, Cuilin; Zhang, Hongyan; Zhu, Ruoxing; She, Shengfei; Wang, Jungao; Li, Tiehu; Liu, Zhifu; Wei, Bingqing

    2014-01-01

    Amorphous carbon nanotubes (ACNTs) with diameters in the range of 7–50 nm were used as absorber materials for electromagnetic waves. The electromagnetic wave absorbing composite films were prepared by a dip-coating method using a uniform mixture of rare earth lanthanum nitrate doped ACNTs and polyvinyl chloride (PVC). The microstructures of ACNTs and ACNT/PVC composites were characterized using transmission electron microscope and X-ray diffraction, and their electromagnetic wave absorbing properties were measured using a vector-network analyzer. The experimental results indicated that the electromagnetic wave absorbing properties of ACNTs are superior to multi-walled CNTs, and greatly improved by doping 6 wt% lanthanum nitrate. The reflection loss (R) value of a lanthanum nitrate doped ACNT/PVC composite was −25.02 dB at 14.44 GHz, and the frequency bandwidth corresponding to the reflector loss at −10 dB was up to 5.8 GHz within the frequency range of 2–18 GHz. PMID:25007783

  18. Attenuation of external Bremsstrahlung in metallic absorbers

    SciTech Connect

    Dhaliwal, A.S.; Powar, M.S.; Singh, M. )

    1990-12-01

    In this paper attenuation of bremsstrahlung from {sup 147}Pm and {sup 170}Tm beta emitters has been studied in aluminum, copper, tin, and lead metallic absorbers. Bremsstrahlung spectra and mass attenuation coefficients for monoenergetic gamma rays are used to calculate theoretical attenuation curves. Magnetic deflection and beta stopping techniques are used to measure the integral bremsstrahlung intensities above 30 keV in different target thicknesses. Comparison of measured and calculated attenuation curves shows a good agreement for various absorbers, thus providing a test of this technique, which may be useful in understanding bremsstrahlung intensity buildup and in the design of optimum shielding for bremsstrahlung sources. It is found that the absorption of bremsstrahlung in metallic absorbers does not obey an exponential law and that absorbers act as energy filters.

  19. Energy absorber uses expanded coiled tube

    NASA Technical Reports Server (NTRS)

    Johnson, E. F.

    1972-01-01

    Mechanical shock mitigating device, based on working material to its failure point, absorbs mechanical energy by bending or twisting tubing. It functions under axial or tangential loading, has no rebound, is area independent, and is easy and inexpensive to build.

  20. Neutron absorbing coating for nuclear criticality control

    DOEpatents

    Mizia, Ronald E.; Wright, Richard N.; Swank, William D.; Lister, Tedd E.; Pinhero, Patrick J.

    2007-10-23

    A neutron absorbing coating for use on a substrate, and which provides nuclear criticality control is described and which includes a nickel, chromium, molybdenum, and gadolinium alloy having less than about 5% boron, by weight.