Science.gov

Sample records for absorbing material ram

  1. An Introduction to Radar Absorbent Materials (RAM),

    DTIC Science & Technology

    1986-02-01

    transition metal ion, a combination of two or more such ions or alterna- tively a combination of mono- and tri- valent ions that maintains overall... valent ions. Not only does the wide variety of compositions lead to a wide variation in the electromagnetic material constants of ferrites, but, even... Giordano , "Measurement of Standing Wave Ratio", ch. 2 in M Sucher, J Fox (Eds) "Handbook of Microwave Measurements, Vol 1", Polytechnic Press of

  2. Knitted radar absorbing materials (RAM) based on nickel-cobalt magnetic materials

    NASA Astrophysics Data System (ADS)

    Teber, Ahmet; Unver, Ibrahim; Kavas, Huseyin; Aktas, Bekir; Bansal, Rajeev

    2016-05-01

    There has been a long-standing interest in the development of flexible, lightweight, thin, and reconfigurable radar absorbing materials (RAM) for military applications such as camouflaging ground-based hardware against airborne radar observation. The use of polymeric Polyacrylonitrile (PAN) fabrics as a host matrix for magnetic metal nano-particles (either at the yarn-stage or after weaving the fabric) for shielding and absorbing applications has been described in the literature. In our experimental investigation, the relative concentrations of Nickel and Cobalt as well as the coating time are varied with a view to optimizing the microwave absorption characteristics of the resulting PAN-based composite material in the radar-frequency bands (X, Ku, and K). It is found that the PAN samples with the shortest coating time have the best return losses (under -20 dB return loss over a moderate bandwidth).

  3. Advanced neutron absorber materials

    DOEpatents

    Branagan, Daniel J.; Smolik, Galen R.

    2000-01-01

    A neutron absorbing material and method utilizing rare earth elements such as gadolinium, europium and samarium to form metallic glasses and/or noble base nano/microcrystalline materials, the neutron absorbing material having a combination of superior neutron capture cross sections coupled with enhanced resistance to corrosion, oxidation and leaching.

  4. Solar radiation absorbing material

    DOEpatents

    Googin, John M.; Schmitt, Charles R.; Schreyer, James M.; Whitehead, Harlan D.

    1977-01-01

    Solar energy absorbing means in solar collectors are provided by a solar selective carbon surface. A solar selective carbon surface is a microporous carbon surface having pores within the range of 0.2 to 2 micrometers. Such a surface is provided in a microporous carbon article by controlling the pore size. A thermally conductive substrate is provided with a solar selective surface by adhering an array of carbon particles in a suitable binder to the substrate, a majority of said particles having diameters within the range of about 0.2-10 microns.

  5. Porcelain enamel neutron absorbing material

    DOEpatents

    Iverson, Daniel C.

    1990-02-06

    A porcelain enamel composition as a neutron absorbing material can be prepared of a major proportion by weight of a cadmium compound and a minor proportion of compounds of boron, lithium and silicon. These compounds in the form of a porcelain enamel coating or layer on several alloys has been found to be particularly effective in enhancing the nuclear safety of equipment for use in the processing and storage of fissile material. The composition of the porcelain enamel coating can be tailored to match the coefficient of thermal expansion of the equipment to be coated and excellent coating adhesion can be achieved.

  6. Porcelain enamel neutron absorbing material

    DOEpatents

    Iverson, D.C.

    1987-11-20

    A porcelain enamel composition as a neutron absorbing material can be prepared of a major proportion by weight of a cadmium compound and a minor proportion of compound of boron, lithium and silicon. These compounds in the form of a porcelain enamel coating or layer on several alloys has been found to be particularly effective in enhancing the nuclear safety of equipment for use in the processing and storage of fissile material. The composition of the porcelain enamel coating can be tailored to match the coefficient of thermal expansion of the equipment to be coated and excellent coating adhesion can be achieved. 2 figs.

  7. Porcelain enamel neutron absorbing material

    DOEpatents

    Iverson, Daniel C.

    1990-01-01

    A porcelain enamel composition as a neutron absorbing material can be prepared of a major proportion by weight of a cadmium compound and a minor proportion of compounds of boron, lithium and silicon. These compounds in the form of a porcelain enamel coating or layer on several alloys has been found to be particularly effective in enhancing the nuclear safety of equipment for use in the processing and storage of fissile material. The composition of the porcelain enamel coating can be tailored to match the coefficient of thermal expansion of the equipment to be coated and excellent coating adhesion can be achieved.

  8. Damage tolerant light absorbing material

    DOEpatents

    Lauf, R.J.; Hamby, C. Jr.; Akerman, M.A.; Seals, R.D.

    1993-09-07

    A light absorbing article comprised of a composite of carbon-bonded carbon fibers, is prepared by: blending carbon fibers with a carbonizable organic powder to form a mixture; dispersing the mixture into an aqueous slurry; vacuum molding the aqueous slurry to form a green article; drying and curing the green article to form a cured article; and, carbonizing the cured article at a temperature of at least about 1000 C to form a carbon-bonded carbon fiber light absorbing composite article having a bulk density less than 1 g/cm[sup 3]. 9 figures.

  9. Damage tolerant light absorbing material

    DOEpatents

    Lauf, Robert J.; Hamby, Jr., Clyde; Akerman, M. Alfred; Seals, Roland D.

    1993-01-01

    A light absorbing article comprised of a composite of carbon-bonded carbon fibers, prepared by: blending carbon fibers with a carbonizable organic powder to form a mixture; dispersing the mixture into an aqueous slurry; vacuum molding the aqueous slurry to form a green article; drying and curing the green article to form a cured article; and, carbonizing the cured article at a temperature of at least about 1000.degree. C. to form a carbon-bonded carbon fiber light absorbing composite article having a bulk density less than 1 g/cm.sup.3.

  10. Magnetic field effects on microwave absorbing materials

    NASA Technical Reports Server (NTRS)

    Goldberg, Ira; Hollingsworth, Charles S.; Mckinney, Ted M.

    1991-01-01

    The objective of this program was to gather information to formulate a microwave absorber that can work in the presence of strong constant direct current (DC) magnetic fields. The program was conducted in four steps. The first step was to investigate the electrical and magnetic properties of magnetic and ferrite microwave absorbers in the presence of strong magnetic fields. This included both experimental measurements and a literature survey of properties that may be applicable to finding an appropriate absorbing material. The second step was to identify those material properties that will produce desirable absorptive properties in the presence of intense magnetic fields and determine the range of magnetic field in which the absorbers remain effective. The third step was to establish ferrite absorber designs that will produce low reflection and adequate absorption in the presence of intense inhomogeneous static magnetic fields. The fourth and final step was to prepare and test samples of such magnetic microwave absorbers if such designs seem practical.

  11. Multilayer Radar Absorbing Non-Woven Material

    NASA Astrophysics Data System (ADS)

    Dedov, A. V.; Nazarov, V. G.

    2016-06-01

    We study the electrical properties of multilayer radar absorbing materials obtained by adding nonwoven sheets of dielectric fibers with an intermediate layer of electrically conductive carbon fibers. Multilayer materials that absorb electromagnetic radiation in a wide frequency range are obtained by varying the content of the carbon fibers. The carbon-fiber content dependent mechanism of absorption of electromagnetic radiation by sheets and multilayer materials is considered.

  12. Interaction of Electromagnetic Waves with Two-Dimensional Metal Covered with Radar Absorbing Material and Plasma

    NASA Astrophysics Data System (ADS)

    Lan, Chaohui; Hu, Xiwei; Jiang, Zhonghe

    2008-12-01

    A two-dimensional metal model is established to investigate the stealth mechanisms of radar absorbing material (RAM) and plasma when they cover the model together. Using the finite-difference time-domain (FDTD) method, the interaction of electromagnetic (EM) waves with the model can be studied. In this paper, three covering cases are considered: a. RAM or plasma covering the metal solely; b. RAM and plasma covering the metal, while plasma is placed outside; c. RAM and plasma covering the metal, while RAM is placed outside. The calculated results show that the covering order has a great influence on the absorption of EM waves. Compared to case a, case b has an advantage in the absorption of relatively high-frequency EM waves (HFWs), whereas case c has an advantage in the absorption of relatively low-frequency EM waves (LFWs). Through the optimization of the parameters of both plasma and RAM, it is hopeful to obtain a broad absorption band by RAM and plasma covering. Near-field attenuation rate and far-field radar cross section (RCS) are employed to compare the different cases.

  13. Radar Absorbing Materials for Cube Stealth Satellite

    NASA Astrophysics Data System (ADS)

    Micheli, D.; Pastore, R.; Vricella, A.; Marchetti, M.

    A Cube Stealth Satellite is proposed for potential applications in defense system. Particularly, the faces of the satellite exposed to the Earth are made of nanostructured materials able to absorb radar surveillance electromagnetic waves, conferring stealth capability to the cube satellite. Microwave absorbing and shielding material tiles are proposed using composite materials consisting in epoxy-resin and carbon nanotubes filler. The electric permittivity of the composite nanostructured materials is measured and discussed. Such data are used by the modeling algorithm to design the microwave absorbing and the shielding faces of the cube satellite. The electromagnetic modeling takes into account for several incidence angles (0-80°), extended frequency band (2-18 GHz), and for the minimization of the electromagnetic reflection coefficient. The evolutionary algorithm used for microwave layered microwave absorber modeling is the recently developed Winning Particle Optimization. The mathematical model of the absorbing structure is finally experimentally validated by comparing the electromagnetic simulation to the measurement of the manufactured radar absorber tile. Nanostructured composite materials manufacturing process and electromagnetic reflection measurements methods are described. Finally, a finite element method analysis of the electromagnetic scattering by cube stealth satellite is performed.

  14. Durability of Polymeric Glazing and Absorber Materials

    SciTech Connect

    Jorgensen, G.; Terwilliger, K.; Bingham, C.; Milbourne, M.

    2005-01-01

    The Solar Heating and Lighting Program has set the goal of reducing the cost of solar water heating systems by at least 50%. An attractive approach to such large cost reduction is to replace glass and metal parts with less-expensive, lighter-weight, more-integrated polymeric components. The key challenge with polymers is to maintain performance and assure requisite durability for extended lifetimes. The objective of this task is to quantify lifetimes through measurement of the optical and mechanical stability of candidate polymeric glazing and absorber materials. Polycarbonate sheet glazings, as proposed by two industry partners, have been tested for resistance to UV radiation with three complementary methods. Incorporation of a specific 2-mil thick UV-absorbing screening layer results in glazing lifetimes of at least 15 years; improved screens promise even longer lifetimes. Proposed absorber materials were tested for creep and embrittlement under high temperature, and appear adequate for planned ICS absorbers.

  15. Design and Manufacture of Energy Absorbing Materials

    ScienceCinema

    Duoss, Eric

    2016-07-12

    Learn about an ordered cellular material that has been designed and manufactured using direct ink writing (DIW), a 3-D printing technology being developed at LLNL. The new material is a patterned cellular material that can absorb mechanical energy-a cushion-while also providing protection against sheering. This material is expected to find utility in application spaces that currently use unordered foams, such as sporting and consumer goods as well as defense and aerospace.

  16. Design and Manufacture of Energy Absorbing Materials

    SciTech Connect

    Duoss, Eric

    2014-05-28

    Learn about an ordered cellular material that has been designed and manufactured using direct ink writing (DIW), a 3-D printing technology being developed at LLNL. The new material is a patterned cellular material that can absorb mechanical energy-a cushion-while also providing protection against sheering. This material is expected to find utility in application spaces that currently use unordered foams, such as sporting and consumer goods as well as defense and aerospace.

  17. Absorber Materials at Room and Cryogenic Temperatures

    SciTech Connect

    F. Marhauser, T.S. Elliott, A.T. Wu, E.P. Chojnacki, E. Savrun

    2011-09-01

    We recently reported on investigations of RF absorber materials at cryogenic temperatures conducted at Jefferson Laboratory (JLab). The work was initiated to find a replacement material for the 2 Kelvin low power waveguide Higher Order Mode (HOM) absorbers employed within the original cavity cryomodules of the Continuous Electron Beam Accelerator Facility (CEBAF). This effort eventually led to suitable candidates as reported in this paper. Furthermore, though constrained by small funds for labor and resources, we have analyzed a variety of lossy ceramic materials, several of which could be usable as HOM absorbers for both normal conducting and superconducting RF structures, e.g. as loads in cavity waveguides and beam tubes either at room or cryogenic temperatures and, depending on cooling measures, low to high operational power levels.

  18. Tech Transfer Webinar: Energy Absorbing Materials

    ScienceCinema

    Duoss, Eric

    2016-07-12

    A new material has been designed and manufactured at LLNL that can absorb mechanical energy--a cushion--while also providing protection against sheering. This ordered cellular material is 3D printed using direct ink writing techniques under development at LLNL. It is expected to find utility in application spaces that currently use unordered foams, such as sporting and consumer goods as well as defense and aerospace.

  19. Tech Transfer Webinar: Energy Absorbing Materials

    SciTech Connect

    Duoss, Eric

    2014-06-17

    A new material has been designed and manufactured at LLNL that can absorb mechanical energy--a cushion--while also providing protection against sheering. This ordered cellular material is 3D printed using direct ink writing techniques under development at LLNL. It is expected to find utility in application spaces that currently use unordered foams, such as sporting and consumer goods as well as defense and aerospace.

  20. Durability of Polymeric Glazing and Absorber Materials

    SciTech Connect

    Jorgensen, G.; Terwilliger, K.; Bingham, C.; Lindquist, C.; Milbourne, M.

    2005-11-01

    The Solar Heating and Lighting Program has set the goal of reducing the cost of solar water heating systems by at least 50%. An attractive approach to such large cost reduction is to replace glass and metal parts with less-expensive, lighter-weight, more-integrated polymeric components. The key challenge with polymers is to maintain performance and assure requisite durability for extended lifetimes. We have begun evaluation of several new UV-screened polycarbonate sheet glazing constructions. This has involved interactions with several major polymer industry companies to obtain improved candidate samples. Proposed absorber materials were tested for UV resistance, and appear adequate for unglazed ICS absorbers.

  1. Investigations on Absorber Materials at Cryogenic Temperatures

    SciTech Connect

    Marhauser, Frank; Elliott, Thomas; Rimmer, Robert

    2009-05-01

    In the framework of the 12 GeV upgrade project for the Continuous Electron Beam Accelerator Facility (CEBAF) improvements are being made to refurbish cryomodules housing Thomas Jefferson National Accelerator Facility's (JLab) original 5-cell cavities. Recently we have started to look into a possible simplification of the existing Higher Order Mode (HOM) absorber design combined with the aim to find alternative material candidates. The absorbers are implemented in two HOM-waveguides immersed in the helium bath and operate at 2 K temperature. We have built a cryogenic setup to perform measurements on sample load materials to investigate their lossy characteristics and variations from room temperature down to 2 K. Initial results are presented in this paper.

  2. Dependence of microwave absorption properties on ferrite volume fraction in MnZn ferrite/rubber radar absorbing materials

    NASA Astrophysics Data System (ADS)

    Gama, Adriana M.; Rezende, Mirabel C.; Dantas, Christine C.

    2011-11-01

    We report the analysis of measurements of the complex magnetic permeability ( μr) and dielectric permittivity ( ɛr) spectra of a rubber radar absorbing material (RAM) with various MnZn ferrite volume fractions. The transmission/reflection measurements were carried out in a vector network analyzer. Optimum conditions for the maximum microwave absorption were determined by substituting the complex permeability and permittivity in the impedance matching equation. Both the MnZn ferrite content and the RAM thickness effects on the microwave absorption properties, in the frequency range of 2-18 GHz, were evaluated. The results show that the complex permeability and permittivity spectra of the RAM increase directly with the ferrite volume fraction. Reflection loss calculations by the impedance matching degree (reflection coefficient) show the dependence of this parameter on both thickness and composition of RAM.

  3. THERMAL UPGRADING OF 9977 RADIOACTIVE MATERIAL (RAM) TYPE B PACKAGE

    SciTech Connect

    Gupta, N.; Abramczyk, G.

    2012-03-26

    The 9977 package is a radioactive material package that was originally certified to ship Heat Sources and RTG contents up to 19 watts and it is now being reviewed to significantly expand its contents in support of additional DOE missions. Thermal upgrading will be accomplished by employing stacked 3013 containers, a 3013 aluminum spacer and an external aluminum sleeve for enhanced heat transfer. The 7th Addendum to the original 9977 package Safety Basis Report describing these modifications is under review for the DOE certification. The analyses described in this paper show that this well-designed and conservatively analyzed package can be upgraded to carry contents with decay heat up to 38 watts with some simple design modifications. The Model 9977 package has been designed as a replacement for the Department of Transportation (DOT) Fissile Specification 6M package. The 9977 package is a very versatile Type B package which is certified to transport and store a wide spectrum of radioactive materials. The package was analyzed quite conservatively to increase its usefulness and store different payload configurations. Its versatility is evident from several daughter packages such as the 9978 and H1700, and several addendums where the payloads have been modified to suit the Shipper's needs without additional testing.

  4. DEVELOPMENT OF BURN TEST SPECIFICATIONS FOR FIRE PROTECTION MATERIALS IN RAM PACKAGES

    SciTech Connect

    Gupta, N.

    2010-03-03

    The regulations in 10 CFR 71 require that the radioactive material (RAM) packages must be able to withstand specific fire conditions given in 10 CFR 71.73 during Hypothetical Accident Conditions (HAC). This requirement is normally satisfied by extensive testing of full scale test specimens under required test conditions. Since fire test planning and execution is expensive and only provides a single snapshot into a package performance, every effort is made to minimize testing and supplement tests with results from computational thermal models. However, the accuracy of such thermal models depends heavily on the thermal properties of the fire insulating materials that are rarely available at the regulatory fire temperatures. To the best of authors knowledge no test standards exist that could be used to test the insulating materials and derive their thermal properties for the RAM package design. This paper presents a review of the existing industry fire testing standards and proposes testing methods that could serve as a standardized specification for testing fire insulating materials for use in RAM packages.

  5. New Solutions for Energy Absorbing Materials

    DTIC Science & Technology

    2012-11-01

    effective material properties of the microstructure have been obtained using finite element analysis and the overall behavior of a... effective material properties of the microstructure have been obtained using finite element analysis and the overall behavior of a composite material ... Materials Page 5 of 68 particulate composite material is assumed to behave as an effective homogeneous medium. The properties of the effective medium

  6. Practical Thermal Evaluation Methods For HAC Fire Analysis In Type B Radiaoactive Material (RAM) Packages

    SciTech Connect

    Abramczyk, Glenn; Hensel, Stephen J; Gupta, Narendra K.

    2013-03-28

    Title 10 of the United States Code of Federal Regulations Part 71 for the Nuclear Regulatory Commission (10 CFR Part 71.73) requires that Type B radioactive material (RAM) packages satisfy certain Hypothetical Accident Conditions (HAC) thermal design requirements to ensure package safety during accidental fire conditions. Compliance with thermal design requirements can be met by prototype tests, analyses only or a combination of tests and analyses. Normally, it is impractical to meet all the HAC using tests only and the analytical methods are too complex due to the multi-physics non-linear nature of the fire event. Therefore, a combination of tests and thermal analyses methods using commercial heat transfer software are used to meet the necessary design requirements. The authors, along with his other colleagues at Savannah River National Laboratory in Aiken, SC, USA, have successfully used this 'tests and analyses' approach in the design and certification of several United States' DOE/NNSA certified packages, e.g. 9975, 9977, 9978, 9979, H1700, and Bulk Tritium Shipping Package (BTSP). This paper will describe these methods and it is hoped that the RAM Type B package designers and analysts can use them for their applications.

  7. Shock Tube Test for Energy Absorbing Materials

    DTIC Science & Technology

    2013-09-13

    Compressed  Air  Cylinder Driver  Section Driven  Section Max Driver  Pressure: 200 PSI Diaphragm Striker Material Nylon Striker Face Diameter...part of a study of materials for an impact attenuating helmet liner project (3). Table 2. Foam materials for testing (7) (8) (9) Manufacturer...including application in helmet liners (8). Zorbium™ is the viscoelastic polyurethane foam used in military helmet suspension system pads (9). 8

  8. Contribution of recoil atoms to irradiation damage in absorber materials

    NASA Astrophysics Data System (ADS)

    Simeone, D.; Hablot, O.; Micalet, V.; Bellon, P.; Serruys, Y.

    1997-08-01

    Absorbing materials are used to control the reactivity of nuclear reactors by taking advantage of nuclear reactions (e.g., 10B(n,α) 7Li) where neutrons are absorbed. During such reactions, energetic recoils are produced. As a result, radiation damage in absorbing materials originates both from these nuclear reactions and from elastic collisions between neutrons and atoms. This damage eventually leads to a partial destruction of the materials, and this is the main limitation on their lifetime in nuclear reactors. Using a formalism developed to calculate displacements per atoms (dpa) in a multi atomic target, we have calculated damages in terms of displacements per atom in a (n,α) absorbing material taking into account geometrical effects of 10 boron self shielding and transmutation reactions induced by neutrons inside the absorber. Radiation damage is calculated for boron carbide and hafnium diboride ceramics in a Pressurized Water Reactor environment. It is shown that recoils produced by nuclear reactions account for the main part of the radiation damage created in these ceramics. Damages are calculated as a function of the distance from the center of an absorber pellet. Due to the self-shielding effect, these damage curves exhibit sharp maxima, the position of which changes in time.

  9. A high absorbance material for solar collectors' applications

    NASA Astrophysics Data System (ADS)

    Oliva, A. I.; Maldonado, R. D.; Díaz, E. A.; Montalvo, A. I.

    2013-06-01

    In this work, we proposed a low cost material to be used as an excellent absorber for solar collectors, to increase its thermal efficiency by the high capacity to absorb solar radiation. The material, known as "smoke black" (soot) can be obtained by the incomplete combustion of organic materials, such as the oxygen-acetylene, paraffin, or candles. A comparative analysis between the optical properties (reflectance, absorbance, and emissivity) measured on three covered copper surfaces (without paint, with a commercial matte black paint, and with smoke black) shows amazing optical results for the smoke black. Reflectance values of the smoke black applied over copper surfaces improves 56 times the values obtained from commercial black paints. High values of emissivity (E=0.9988) were measured on the surface covered with smoke black by spectrophotometry in the UV-VIS range, which represents about 7% of increment as compared with the value obtained for commercial black paints (E=0.938). The proposed high absorbance material can be easily applied on any kind of surfaces at low cost.

  10. Sound-absorbing slabs and structures based on granular materials (bound and unbound). [energy absorbing efficiency of porous material

    NASA Technical Reports Server (NTRS)

    Petre-Lazar, S.; Popeea, G.

    1974-01-01

    Sound absorbing slabs and structures made up of bound or unbound granular materials are considered and how to manufacture these elements at the building site. The raw material is a single grain powder (sand, expanded blast furnace slag, etc.) that imparts to the end products an apparent porosity of 25-45% and an energy dissipation within the structure leading to absorption coefficients that can be compared with those of mineral wool and urethane.

  11. Application of Absorbable Hemostatic Materials Observed in Thyroid Operation

    NASA Astrophysics Data System (ADS)

    Li, Yan-Ming; Liang, Zhen-Zhen; Song, Yan

    2016-05-01

    To observe the application effects of the absorbable hemostatic materials in thyroid operation. Methods: From May 2014 to January 2015, 100 patients with thyroid surgery in our university affiliated hospital were selected as the research object. Randomly divided into experimental group and control group, 50 cases in each group. Application of absorbable hemostatic hemostatic materials in the experimental group during the operation, the control group using the traditional mechanical methods of hemostasis hemostasis to observe the operation time, bleeding volume, postoperative drainage volume, complications and hospital stay of the two groups. Results: The operation time, bleeding volume, postoperative drainage and hospital stay in the experimental group were significantly lower in the study group than in the control group, and the difference between the two groups was statistically significant (P< 0.05); The satisfaction of patients in the experimental group was significantly higher than that in the control group, the difference was statistically significant in the two groups (P < 0.05); There was no significant difference in the incidence of wound bleeding complications between the study group and the control group (P > 0.05). Conclusion: Absorbable hemostatic materials can effectively shorten the operation time, reduce intraoperative blood loss and postoperative drainage, reduce the length of hospital stay and improve the success rate of surgery and patient satisfaction, which is worthy to be popularized in clinical thyroid surgery.

  12. Porphyrin Based Near Infrared-Absorbing Materials for Organic Photovoltaics

    NASA Astrophysics Data System (ADS)

    Zhong, Qiwen

    The conservation and transformation of energy is essential to the survival of mankind, and thus concerns every modern society. Solar energy, as an everlasting source of energy, holds one of the key solutions to some of the most urgent problems the world now faces, such as global warming and the oil crisis. Advances in technologies utilizing clean, abundant solar energy, could be the steering wheel of our societies. Solar cells, one of the major advances in converting solar energy into electricity, are now capturing people's interest all over the globe. While solar cells have been commercially available for many years, the manufacturing of solar cells is quite expensive, limiting their broad based implementation. The cost of solar cell based electricity is 15-50 cents per kilowatt hour (¢/kwh), depending on the type of solar cell, compared to 0.7 ¢/kwh for fossil fuel based electricity. Clearly, decreasing the cost of electricity from solar cells is critical for their wide spread deployment. This will require a decrease in the cost of light absorbing materials and material processing used in fabricating the cells. Organic photovoltaics (OPVs) utilize organic materials such as polymers and small molecules. These devices have the advantage of being flexible and lower cost than conventional solar cells built from inorganic semiconductors (e.g. silicon). The low cost of OPVs is tied to lower materials and fabrication costs of organic cells. However, the current power conversion efficiencies of OPVs are still below 15%, while convention crystalline Si cells have efficiencies of 20-25%. A key limitation in OPVs today is their inability to utilize the near infrared (NIR) portion of the solar spectrum. This part of the spectrum comprises nearly half of the energy in sunlight that could be used to make electricity. The first and foremost step in conversion solar energy conversion is the absorption of light, which nature has provided us optimal model of, which is

  13. Device for Measuring Heat Capacities of Microcalorimeter Absorber Materials

    NASA Astrophysics Data System (ADS)

    Kotsubo, Vincent; Beall, James; Ullom, Joel

    2009-12-01

    We are developing a device for measuring the heat capacity of candidate absorber materials for gamma-ray microcalorimeters with the goal of finding materials with low heat capacity and high stopping power to improve detector efficiency. To date, only Sn has been effective as an absorber, and speculation is that other materials suffer from anomalously high heat capacities at low temperatures. The key component of the measurement device is a 17 mm×17 mm low heat capacity silicon platform suspended by Kevlar fibers designed for accepting 1 g to 2 g samples, and whose heat capacity can be characterized prior to attaching a sample. The platform has a thin film Pd/Au heater deposited directly on the silicon, and a semiconducting thermometer bonded to the surface. The heat capacity is determined from C = Gτ, where G is the in-situ measured conductance and x is the measured temperature decay time from a step change in applied heat. For a platform without samples, decay periods on the order of 0.3 to 0.05 seconds were measured. With samples, decay periods of several seconds are projected, allowing good resolution of the heat capacities. Several thermometers were tested in an effort to find one with the optimum characteristics for measuring platform temperatures. These included a commercial thick-film Ruthenium-oxide surface-mount resistor, a germanium NTD, and a zirconium oxy-nitride thin-film thermometer.

  14. Material Model Evaluation of a Composite Honeycomb Energy Absorber

    NASA Technical Reports Server (NTRS)

    Jackson, Karen E.; Annett, Martin S.; Fasanella, Edwin L.; Polanco, Michael A.

    2012-01-01

    A study was conducted to evaluate four different material models in predicting the dynamic crushing response of solid-element-based models of a composite honeycomb energy absorber, designated the Deployable Energy Absorber (DEA). Dynamic crush tests of three DEA components were simulated using the nonlinear, explicit transient dynamic code, LS-DYNA . In addition, a full-scale crash test of an MD-500 helicopter, retrofitted with DEA blocks, was simulated. The four material models used to represent the DEA included: *MAT_CRUSHABLE_FOAM (Mat 63), *MAT_HONEYCOMB (Mat 26), *MAT_SIMPLIFIED_RUBBER/FOAM (Mat 181), and *MAT_TRANSVERSELY_ANISOTROPIC_CRUSHABLE_FOAM (Mat 142). Test-analysis calibration metrics included simple percentage error comparisons of initial peak acceleration, sustained crush stress, and peak compaction acceleration of the DEA components. In addition, the Roadside Safety Verification and Validation Program (RSVVP) was used to assess similarities and differences between the experimental and analytical curves for the full-scale crash test.

  15. Boron-copper neutron absorbing material and method of preparation

    DOEpatents

    Wiencek, Thomas C.; Domagala, Robert F.; Thresh, Henry

    1991-01-01

    A composite, copper clad neutron absorbing material is comprised of copper powder and boron powder enriched with boron 10. The boron 10 content can reach over 30 percent by volume, permitting a very high level of neutron absorption. The copper clad product is also capable of being reduced to a thickness of 0.05 to 0.06 inches and curved to a radius of 2 to 3 inches, and can resist temperatures of 900.degree. C. A method of preparing the material includes the steps of compacting a boron-copper powder mixture and placing it in a copper cladding, restraining the clad assembly in a steel frame while it is hot rolled at 900.degree. C. with cross rolling, and removing the steel frame and further rolling the clad assembly at 650.degree. C. An additional sheet of copper can be soldered onto the clad assembly so that the finished sheet can be cold formed into curved shapes.

  16. Bacteriocin typing by leakage of ultraviolet light-absorbing material.

    PubMed Central

    Farkas-Himsley, H; Pagel, A

    1977-01-01

    A rapid and reproducible method of bacteriocin typing is described based on leakage of ultraviolet light-absorbing material (UVAM), detectable in supernatants of bacteriocin-sensitive cultures, by means of a spectrophotometer. The prerequisites for reproducible results, with nonsignificant fluctuations in standard error of the mean, are: a set of standardized bacteriocins, produced under defined conditions and of determined strength. These must interact with the unknown bacterial culture in suspension and at a given ratio in order to achieve an optimal multiplicity of interaction. Pyocin and colicin typing by the "scrape and streak" technique of Gillies (J. Hyg. 62:1-10, 1963) was compared with the UVAM leakage method in 275 tests; the two tests were found to be in good agreement for the strains tested. PMID:406200

  17. Alternative materials to cadmium for neutron absorbers in safeguards applications

    SciTech Connect

    Freeman, Corey R; Geist, William H; West, James D

    2009-01-01

    Cadmium is increasingly difficult to use in safeguards applications because of rising cost and increased safety regulations. This work examines the properties of two materials produced by Ceradyne, inc. that present alternatives to cadmium for neutron shielding. The first is an aluminum metal doped with boron and the second is a boron carbide powder, compressed into a ceramic. Both are enriched in the {sup 10}B isotope. Two sheets of boron doped aluminum (1.1 mm and 5.2mm thick) and one sheet of boron carbide (8.5mm thick) were provided by Ceradyne for testing. An experiment was designed to test the neutron absorption capabilities of these three sheets against two different thicknesses of cadmium (0.6mm and 1.6mm thick). The thinner piece of aluminum boron alloy (1.1mm) performed as well as the cadmium pieces at absorbing neutrons. The thicker aluminum-boron plate provided more shielding than the cadmium sheets and the boron carbide performed best by a relatively large margin. Monte Carlo N-Particle eXtended (MCNPX) transport code modeling of the experiment was performed to provide validaLed computational tools for predicting the behavior of systems in which these materials may be incorporated as alternatives to cadmium. MCNPX calculations predict that approximately 0.17mm of the boron carbide is equivalent to 0.6mm of cadmium. There are drawbacks to these materials that need to be noted when considering using them as replacements for cadmium. Notably, they may need to be thicker than cadmium, and are not malleable, requiring machining to fit any curved forms.

  18. Dysprosium titanate as an absorber material for control rods

    NASA Astrophysics Data System (ADS)

    Risovany, V. D.; Varlashova, E. E.; Suslov, D. N.

    2000-09-01

    Disprosium titanate is an attractive control rod material for the thermal neutron reactors. Its main advantages are: insignificant swelling, no out-gassing under neutron irradiation, rather high neutron efficiency, a high melting point (˜1870°C), non-interaction with the cladding at temperatures above 1000°C, simple fabrication and easily reprocessed non-radioactive waste. It can be used in control rods as pellets and powder. The disprosium titanate control rods have worked off in the MIR reactor for 17 years, in VVER-1000 - for 4 years without any operating problems. After post-irradiation examinations this type of control rod having high lifetime was recommended for the VVER and RBMK. The paper presents the examination results of absorber element dummies containing dysprosium titanate, irradiated in the SM reactor to the neutron fluence of 3.4×10 22 cm -2 ( E>0.1 MeV) and, also, the data on structure, thermal-physical properties of dysprosium titanate, efficiency of dysprosium titanate control rods.

  19. Thin films of copper antimony sulfide: A photovoltaic absorber material

    SciTech Connect

    Ornelas-Acosta, R.E.; Shaji, S.; Avellaneda, D.; Castillo, G.A.; Das Roy, T.K.; Krishnan, B.

    2015-01-15

    Highlights: • CuSbS{sub 2} thin films were prepared by heating Sb{sub 2}S{sub 3}/Cu layers. • Analyzed the structure, composition, optical, and electrical properties. • PV structures: glass/SnO{sub 2}:F/n-CdS/p-CuSbS{sub 2}/C/Ag were formed at different conditions. • The PV parameters (J{sub sc}, V{sub oc}, and FF) were evaluated from the J–V characteristics. • J{sub sc}: 0.52–3.20 mA/cm{sup 2}, V{sub oc}:187–323 mV, FF: 0.27–0.48 were obtained. - Abstract: In this work, we report preparation and characterization of CuSbS{sub 2} thin films by heating glass/Sb{sub 2}S{sub 3}/Cu layers and their use as absorber material in photovoltaic structures: glass/SnO{sub 2}:F/n-CdS/p-CuSbS{sub 2}/C/Ag. The Sb{sub 2}S{sub 3} thin films of 600 nm were prepared by chemical bath deposition on which copper thin films of 50 nm were thermally evaporated, and the glass/Sb{sub 2}S{sub 3}/Cu multilayers were heated in vacuum at different temperatures. X-ray diffraction analysis showed the formation of orthorhombic CuSbS{sub 2} after heating the precursor layers. Studies on identification and chemical state of the elements were done using X-ray photoelectron spectroscopy. The optical band gap of the CuSbS{sub 2} thin films was 1.55 eV and the thin films were photoconductive. The photovoltaic parameters of the devices using CuSbS{sub 2} as absorber and CdS as window layer were evaluated from the J–V curves, yielding J{sub sc}, V{sub oc}, and FF values in the range of 0.52–3.20 mA/cm{sup 2}, 187–323 mV, and 0.27–0.48, respectively, under illumination of AM1.5 radiation.

  20. Analysis and evaluation of RF absorbing material in suppressing modes associated with a metallic cavity

    NASA Astrophysics Data System (ADS)

    Green, David L.

    Application of absorbing materials within enclosures designed to house high-speed digital electronics has become common practice for suppressing resonances associated with the enclosure geometry. Use of absorbing material is often considered toward the end of the design phase when the product is undergoing electromagnetic compatibility compliance testing, leaving little time for the additional experimentation required to optimize absorber material selection or placement within the device. The engineering principles required for maximizing absorber performance within the enclosure are often disregarded, replaced by a "shotgun" approach where multiple material options are experimented with until a solution is achieved. For this research a frequency domain reverberation chamber technique and one-port time domain quality factor estimation technique are employed to quantify the ability of various absorbing materials to suppress resonances of a physically small, electrically large cavity representative of those that may be used to enclose high-speed circuitry. Using both measurement techniques, assessment of the performance of various absorbing materials was performed as well as an evaluation of the affect absorber position has on overall material performance. It was found that both measurement techniques were effective in quantifying absorber performance within the cavity. For the frequency domain reverberation chamber approach the absorber effectiveness, defined as the difference in insertion loss between the cavity with and without absorbing material, was analyzed for various materials. For the undermoded cavity it was found that absorber effectiveness was positionally dependent. For the overmoded cavity, however, the position of the absorber within the cavity, as long as the total exposed surface area remained constant, did not have a significant impact on the absorber effectiveness. Similar results were also found by comparing the estimated quality factor for

  1. Nano-Textured Fiber Coatings for Energy Absorbing Polymer Matrix Composite Materials

    DTIC Science & Technology

    2004-12-01

    NANO-TEXTURED FIBER COATINGS FOR ENERGY ABSORBING POLYMER MATRIX COMPOSITE MATERIALS R. E. Jensen and S. H. McKnight Army Research Laboratory...Textured Fiber Coatings For Energy Absorbing Polymer Matrix Composite Materials 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

  2. Boron cage compound materials and composites for shielding and absorbing neutrons

    DOEpatents

    Bowen, III, Daniel E; Eastwood, Eric A

    2014-03-04

    Boron cage compound-containing materials for shielding and absorbing neutrons. The materials include BCC-containing composites and compounds. BCC-containing compounds comprise a host polymer and a BCC attached thereto. BCC-containing composites comprise a mixture of a polymer matrix and a BCC filler. The BCC-containing materials can be used to form numerous articles of manufacture for shielding and absorbing neutrons.

  3. Metal Hydrides as hot carrier cell absorber materials

    NASA Astrophysics Data System (ADS)

    Wang, Pei; Wen, Xiaoming; Shrestha, Santosh; Conibeer, Gavin; Aguey-Zinsou, Kondo-Francois

    2016-09-01

    The hot Carrier Solar Cell (HCSC) allows the photon-induced hot carriers (the carriers with energy larger than the band gap) to be collected before they completely thermalise. The absorber of the HCSC should have a large phononic band gap to supress Klemens Decay, which results in a slow carrier cooling speed. In fact, a large phononic band gap likely exists in a binary compound whose constituent elements have a large mass ratio between each other. Binary hydrides with their overwhelming mass ratio of the constituent elements are important absorber candidates. Study on different types of binary hydrides as potential absorber candidates is presented in this paper. Many binary transition metal hydrides have reported theoretical or experimental phonon dispersion charts which show large phononic band gaps. Among these hydrides, the titanium hydride (TiHX) is outstanding because of its low cost, easy fabrication process and is relatively inert to air and water. A TiHX thin film is fabricated by directly hydrogenating an evaporated titanium thin film. Characterisation shows good crystal quality and the hydrogenation process is believed to be successful. Ultrafast transient absorption (TA) spectroscopy is used to study the electron cooling time of TiHX. The result is very noisy due to the low absorption and transmission of the sample. The evolution of the TA curves has been explained by band to band transition using the calculated band structure of TiH2. Though not reliable due to the high noise, decay time fitting at 700nm and 600nm shows a considerably slow carrier cooling speed of the sample.

  4. Negative Refraction in a Uniaxial Absorbent Dielectric Material

    ERIC Educational Resources Information Center

    Jen, Yi-Jun; Lakhtakia, Akhlesh; Yu, Ching-Wei; Lin, Chin-Te

    2009-01-01

    Refraction of light from an isotropic dielectric medium to an anisotropic dielectric material is a complicated phenomenon that can have several different characteristics not usually discussed in electromagnetics textbooks for undergraduate students. With a simple problem wherein the refracting material is uniaxial with its optic axis normal to the…

  5. Levelized Cost of Coating (LCOC) for selective absorber materials

    SciTech Connect

    Ho, Clifford K.; Pacheco, James E.

    2014-08-08

    A new metric has been developed to evaluate and compare selective absorber coatings for concentrating solar power applications. Previous metrics have typically considered the performance of the selective coating (i.e., solar absorptance and thermal emittance), but cost and durability were not considered. This report describes the development of the levelized cost of coating (LCOC), which is similar to the levelized cost of energy (LCOE) commonly used to evaluate alternative energy technologies. The LCOC is defined as the ratio of the annualized cost of the coating (and associated costs such as labor and number of heliostats required) to the average annual thermal energy produced by the receiver. The baseline LCOC using Pyromark 2500 paint was found to be %240.055/MWht, and the distribution of LCOC values relative to this baseline were determined in a probabilistic analysis to range from -%241.6/MWht to %247.3/MWht, accounting for the cost of additional (or fewer) heliostats required to yield the same baseline average annual thermal energy produced by the receiver. A stepwise multiple rank regression analysis showed that the initial solar absorptance was the most significant parameter impacting the LCOC, followed by thermal emittance, degradation rate, reapplication interval, and downtime during reapplication.

  6. Pipe ram improvement facilitates hang off

    SciTech Connect

    Not Available

    1986-06-02

    Hard facing on the top surface of ram blowout preventors (BOPs) can prevent deformation when hanging off drill pipe. A new ram body features this hardfacing. This improvement is important to floating drilling because it transfers potential damage from critical pressure components to relatively inexpensive and less critical drill pipe upsets. National Association of Corrosion Engineers (NACE) specifications for H/sub 2/S resistance often mean that pipe rams do not have the hardness required to hang off long strings without deformation to the ram. Conventionally, the problem has been solved by welding a harder material to the portion of the ram on which the tool joint lands. This method, although widely used, can result in cracking in the inlaid area of the ram. In a typical sequence, weather requires a floating drilling rig to disconnect. The pipe rams are closed after the bit is pulled off bottom. The string is lowered until a tool joint is in the rams. The drillstring is backed off, leaving downhole string weight on the rams. Upper rams are shut, and upper marine riser package, riser, and drillstring are disconnected, freeing the vessel from the well. On reentry, the operator can find that the ram bodies are damaged or the inlay is broken. This can necessitate pulling the riser for BOP stack maintenance.

  7. 3D-Printing ‘Smarter’ Energy Absorbing Materials

    SciTech Connect

    Duoss, Eric

    2014-08-29

    Foams are, by nature, disordered materials studded with air pockets of varying sizes. Lack of control over the material’s architecture at the micrometer or nanometer scale can make it difficult to adjust the foam’s basic properties. But Eric Duoss and a team of Livermore researchers are using additive manufacturing to develop “smarter” silicone cushions. By architecting the structure at the micro scale, they are able to control macro-scale properties previously unachievable with foam materials.

  8. Evaluation of blue and green absorbing proteorhodopsins as holographic materials.

    PubMed

    Xi, Bangwei; Tetley, William C; Marcy, Duane L; Zhong, Cheng; Whited, Gregg; Birge, Robert R; Stuart, Jeffrey A

    2008-02-28

    Transient holographic diffraction is observed for the green (GPR) and blue (BPR) absorbing proteorhodopsins (BAC31A8 and HOT75M1, respectively), as well as the GPR E108Q and BPR E110Q variants. In contrast to bacteriorhodopsin, where the metastable bR-M pair is responsible for generating diffraction, the pR and red-shifted N-like states fulfill that role in both the green and blue wild-type proteorhodopsins. The GPR E108Q and BPR E110Q variants, however, behave more similarly to their bacteriorhodopsin analogue, D96N, with diffraction arising from the PR M-state (strongly enhanced in both GPR E108Q and BPR E110Q). Of the four proteins evaluated, wild type (WT) GPR and GPR E108Q produce the highest diffraction efficiencies, etamax, at approximately 1% for a 1.7 OD sample. GPR E108Q, however, requires 1-2 orders of magnitude less laser intensity to generate eta equivalent to WT GPR and BR D96N under similar conditions (as compared to literature values). WT BPR requires lower actinic powers than GPR but diffracts only about 30% as well. BPR E110Q performs the most poorly of the four, with etamax < 0.05% for a 1.4 OD film. The Kramers-Kronig transformation and Koglenik's coupled wave theory were used to predict the dispersion spectra and diffraction efficiency for the long M-state variants. To a first approximation, the gratings formed by all samples decay upon discontinuing the 520 nm actinic beams with a time constant characteristic of the appropriate intermediate: the N-like state for WT GPR and BPR and the M-state for GPR 108Q and BPR E110Q.

  9. Method of Synthesizing a Novel Absorbent Titanosilicate Material (UPRM-5)

    NASA Technical Reports Server (NTRS)

    Hernandez-Maldonado, Arturo (Inventor); Primera-Pedrozo, Jose N (Inventor)

    2013-01-01

    A titanium silicate variant named UPRM-5 was prepared using tetraethylammonium hydroxide as a structure-directing agent (SDA). Successful detemplation was achieved via ion exchange with NH4Cl. Effective functionalization was obtained after ion exchanging the detemplated material using SrCl2 and BaCl2. Adsorption of CO2 at 25 deg C in Sr(-) and Ba-UPRM-5 materials activated at different temperatures. For low partial pressures, the observed CO2 adsorption capacities increased as follows: NH4-UPRM-5 less than Sr-UPRM-5 less than Ba-UPRM-5. Both the Sr(-) and Ba-UPRM-5 materials exhibited outstanding selectivity for CO2 over CH4, N2 and O2.

  10. Electrokinetic profiles of nonowoven cotton for absorbent incontinence material

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This paper discusses recent work on cotton/synthetic nonwovens, their electrokinetic analysis, and their potential use in incontinence materials. Electrokinetic analysis is useful in exploring fiber surface polarity properties, and it is a useful tool to render a snap shot of the role of fiber char...

  11. Highly Absorbing Metal Nanolaminates for Bi-Material THz Sensors

    DTIC Science & Technology

    2011-09-01

    able to penetrate most insulating materials ( textiles , paper, etc.) while reflecting from metallic objects makes it a good candidate for the leading...layers usually consist of a structural layer coated with a metal film having different coefficient of thermal expansion to that of the structural...degree angle of incidence. In order to measure the background, a gold coated silicon wafer, which behaves as a perfect mirror with reflection close to

  12. Material Activation Benchmark Experiments at the NuMI Hadron Absorber Hall in Fermilab

    SciTech Connect

    Matsumura, H.; Matsuda, N.; Kasugai, Y.; Toyoda, A.; Yashima, H.; Sekimoto, S.; Iwase, H.; Oishi, K.; Sakamoto, Y.; Nakashima, H.; Leveling, A.; Boehnlein, D.; Lauten, G.; Mokhov, N.; Vaziri, K.

    2014-06-15

    In our previous study, double and mirror symmetric activation peaks found for Al and Au arranged spatially on the back of the Hadron absorber of the NuMI beamline in Fermilab were considerably higher than those expected purely from muon-induced reactions. From material activation bench-mark experiments, we conclude that this activation is due to hadrons with energy greater than 3 GeV that had passed downstream through small gaps in the hadron absorber.

  13. On the use of a loudspeaker for measuring the viscoelastic properties of sound absorbing materials.

    PubMed

    Doutres, Olivier; Dauchez, Nicolas; Génevaux, Jean-Michel; Lemarquand, Guy

    2008-12-01

    This paper investigates the feasibility to use an electrodynamic loudspeaker to determine viscoelastic properties of sound-absorbing materials in the audible frequency range. The loudspeaker compresses the porous sample in a cavity, and a measurement of its electrical impedance allows one to determine the mechanical impedance of the sample: no additional sensors are required. Viscoelastic properties of the material are then estimated by inverting a 1D Biot model. The method is applied to two sound-absorbing materials (glass wool and polymer foam). Results are in good agreement with the classical compression quasistatic method.

  14. Determining the Absorbance Spectra of Photochromic Materials From Measured Spectrophotometer Data

    NASA Technical Reports Server (NTRS)

    Downie, John D.

    1998-01-01

    If a two-state photochromic material is optically bleached, the absorbance spectrum data measured by a spectrophotometer is in general comprised of components from both the ground state and the upper state. Under general conditions, it may be difficult to extract the actual upper state spectrum from the spectrum of the bleached material. A simple algorithm is presented here for the recovery of the pure absorbance spectra of the upper state of a material such as bacteriorhodopsin, given single wavelength bleaching illumination, steady-state conditions, and accurate knowledge of phototransition rates and thermal decay rates.

  15. Absorber Materials for Transition-Edge Sensor X-ray Microcalorimeters

    NASA Technical Reports Server (NTRS)

    Brown, Ari-David; Bandler, Simon; Brekosky, Regis; Chervenak, James; Figueroa-Feliciano, Enectali; Finkbeiner, Fred; Sadleir, Jack; Iyomoto, Naoko; Kelley, Richard; Kilbourne, Caroline; Porter, F. Scott; Smith, Stephen; Saab, Tarek; Sadleir, Jac,

    2007-01-01

    Arrays of superconducting transition-edge sensors (TES) can provide high spatial and energy resolution necessary for x-ray astronomy. High quantum efficiency and uniformity of response can be achieved with a suitable absorber material, in which absorber x-ray stopping power, heat capacity, and thermal conductivity are relevant parameters. Here we compare these parameters for bismuth and gold. We have fabricated electroplated gold, electroplated gold/electroplated bismuth, and evaporated gold/evaporated bismuth 8x8 absorber arrays and find that a correlation exists between the residual resistance ratio (RRR) and thin film microstructure. This finding indicates that we can tailor absorber material conductivity via microstructure alteration, so as to permit absorber thermalization on timescales suitable for high energy resolution x-ray microcalorimetry. We show that by incorporating absorbers possessing large grain size, including electroplated gold and electroplated gold/electroplated bismuth, into our current Mo/Au TES, devices with tunable heat capacity and energy resolution of 2.3 eV (gold) and 2.1 eV (gold/bismuth) FWHM at 6 keV have been fabricated.

  16. Improving impact resistance of ceramic materials by energy absorbing surface layers

    NASA Technical Reports Server (NTRS)

    Kirchner, H. P.; Seretsky, J.

    1974-01-01

    Energy absorbing surface layers were used to improve the impact resistance of silicon nitride and silicon carbide ceramics. Low elastic modulus materials were used. In some cases, the low elastic modulus was achieved using materials that form localized microcracks as a result of thermal expansion anisotropy, thermal expansion differences between phases, or phase transformations. In other cases, semi-vitreous or vitreous materials were used. Substantial improvements in impact resistance were observed at room and elevated temperatures.

  17. Characterization and preparation of p(U-MMA-An) interpenetrating polymer network damping and absorbing material.

    PubMed

    Liu, Jun; Li, Qingshan; Zhuo, Yuguo; Hong, Wei; Lv, Wenfeng; Xing, Guangzhong

    2014-06-01

    P(U-MMA-ANI) interpenetrating polymer network (IPN) damping and absorbing material is successfully synthesized by PANI particles served as an absorbing agent with the microemulsion polymerization and P(U-MMA) foam IPN network structure for substrate materials with foaming way. P(U-MMA-ANI) IPN is characterized by the compression mechanical performance testing, TG-DSC, and DSC. The results verify that the P(U-MMA) IPN foam damping material has a good compressive strength and compaction cycle property, and the optimum content of PMMA was 40% (mass) with which the SEM graphs do not present the phase separation on the macro level between PMMA and PU, while the phase separation was observed on the micro level. The DTG curve indicates that because of the formation of P(U-MMA) IPN, the decomposition temperature of PMMA and the carbamate in PU increases, while that of the polyol segment in PU has almost no change. P(U-MMA-ANI) IPN foam damping and absorbing material is obtained by PANI particles served as absorbing agent in the form of filler, and PMMA in the form of micro area in substrate material. When the content of PANI was up to 2.0% (mass), the dissipation factor of composites increased, and with the increasing of frequency the dissipation factor increased in a straight line.

  18. Preparation of steel slag porous sound-absorbing material using coal powder as pore former.

    PubMed

    Sun, Peng; Guo, Zhancheng

    2015-10-01

    The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50% (wt.%), percentage of coal powder of 30% (wt.%), sintering temperature of 1130°C, and sintering time of 6.0hr, which were determined by analyzing the properties of the sound-absorbing material.

  19. Absorbent Material

    NASA Technical Reports Server (NTRS)

    1985-01-01

    A superabsorbent fabric developed by Johnson Space Center and described in Tech Briefs was adapted by Honeywell and fabricated into special containment devices used on Navy "smart" torpedos. The superabsorbent fabric can sequester up to 400 times its own weight in water and protects the torpedo electronic controls from possible short circuiting by deepwater hull seepage.

  20. Clinical studies with disposable diapers containing absorbent gelling materials: evaluation of effects on infant skin condition.

    PubMed

    Campbell, R L; Seymour, J L; Stone, L C; Milligan, M C

    1987-12-01

    Disposable infant diapers with absorbent gelling material (cross-linked sodium polyacrylates) incorporated into the core were clinically evaluated for their effect on infant skin condition. Absorbent gelling materials tightly hold water and provide pH control by a buffering capacity as well as by helping to segregate urine apart from feces. Four clinical studies were conducted with each following a rigid protocol that controlled for variables of diet and age in addition to the diaper material that may influence the development of diaper dermatitis and helped to control for any inherent bias in the study. This allowed for the controlled assessment of skin condition with respect to diaper type. Absorbent gelling material-containing disposable, conventional (100% cellulose core) disposable, and home-laundered cloth diapers were test products. In these studies 1614 infants were initially enrolled with 522 of them assigned to absorbent gelling material disposable, 738 to conventional disposable, and 354 to home-laundered cloth diapers. Objective measurements of skin wetness (transepidermal water loss) and skin pH, as well as double-blind grading of diaper dermatitis, were the measures of skin condition. Absorbent gelling material disposable diapers were associated with significantly reduced skin wetness, closer to normal skin pH, and lower degrees of diaper dermatitis when compared to conventional disposable or home-laundered cloth diapers. The results are consistent with the hypothesis that better control in the diaper area of skin wetness, skin pH, and the prevention of the mixing of urine and feces produces a better diaper environment.

  1. Food-processes wastewaters treatment using food solid-waste materials as adsorbents or absorbents

    NASA Astrophysics Data System (ADS)

    Rapti, Ilaira; Georgopoulos, Stavros; Antonopoulou, Maria; Konstantinou, Ioannis; Papadaki, Maria

    2016-04-01

    The wastewaters generated by olive-mills during the production of olive oil, wastewaters from a dairy and a cow-farm unit and wastewaters from a small food factory have been treated by means of selected materials, either by-products of the same units, or other solid waste, as absorbents or adsorbents in order to identify the capacity of those materials to remove organic load and toxicity from the aforementioned wastewaters. The potential of both the materials used as absorbents as well as the treated wastewaters to be further used either as fertilizers or for agricultural irrigation purposes are examined. Dry olive leaves, sheep wool, rice husks, etc. were used either in a fixed-bed or in a stirred batch arrangemen,t employing different initial concentrations of the aforementioned wastewaters. The efficiency of removal was assessed using scpectrophotometric methods and allium test phytotoxicity measurements. In this presentation the response of each material employed is shown as a function of absorbent/adsorbent quantity and kind, treatment time and wastewater kind and initial organic load. Preliminary results on the potential uses of the adsorbents/absorbents and the treated wastewaters are also shown. Keywords: Olive-mill wastewaters, dairy farm wastewaters, olive leaves, zeolite, sheep wool

  2. Realizing thin electromagnetic absorbers for wide incidence angles from commercially available planar circuit materials

    SciTech Connect

    Glover, Brian B; Whites, Kieth W; Radway, Matthew J

    2009-01-01

    In this study, recent work on engineering R-card surface resistivity with printed metallic patterns is extended to the design of thin electromagnetic absorbers. Thin electromagnetic absorbers for wide incidence angles and both polarizations have recently been computationally verified by Luukkonen et al.. These absorbers are analytically modeled high-impedance surfaces with capacitive arrays of square patches implemented with relatively high dielectric constant and high loss substrate. However, the advantages provided by the accurate analytical model are largely negated by the need to obtain high dielectric constant material with accurately engineered loss. Fig. I(c) illustrates full-wave computational results for an absorber without vias engineered as proposed by Luukkonen et al.. Unique values for the dielectric loss are required for different center frequencies. Parameters for the capacitive grid are D=5.0 mm and w=O.l mm for a center frequency of 3.36 GHz. The relative permittivity and thickness is 9.20(1-j0.234) and 1=3.048 mm. Consider a center frequency of5.81 GHz and again 1=3.048 mm, the required parameters for the capacitive grid are D=2.0 mm and w=0.2 mm where the required relative permittivity is now 9.20(1-j0.371) Admittedly, engineered dielectrics are themselves a historically interesting and fruitful research area which benefits today from advances in monolithic fabrication using direct-write of dielectrics with nanometer scale inclusions. However, our objective in the present study is to realize the advantages of the absorber proposed by Luukkonen et al. without resort to engineered lossy dielectrics. Specifically we are restricted to commercially available planer circuit materials without use of in-house direct-write technology or materials engineering capability. The materials considered here are TMM 10 laminate with (35 {mu}lm copper cladding with a complex permittivity 9.20-j0.0022) and Ohmegaply resistor conductor material (maximum 250 {Omega

  3. Thin absorber EUV photomask based on mixed Ni and TaN material

    NASA Astrophysics Data System (ADS)

    Hay, Derrick; Bagge, Patrick; Khaw, Ian; Sun, Lei; Wood, Obert; Chen, Yulu; Kim, Ryoung-han; Qi, Zhengqing John; Shi, Zhimin

    2016-05-01

    Lithographic patterning at the 7 and 5 nm nodes will likely require EUV (λ=13.5 nm) lithography for many of the critical levels. All optical elements in an EUV scanner are reflective which requires the EUV photomask to be illuminated at an angle to its normal. Current scanners have an incidence of 6 degree, but future designs will be <6 degrees for high-NA systems. Non-telecentricity has been shown to cause H-V bias due to shadowing, pattern shift through focus, and image contrast lost due to apodization by the reflective mask coating. A thinner EUV absorber can dramatically reduce these issues. Ni offers better EUV absorption than Ta-based materials, which hold promise as a thinner absorber candidate. Unfortunately, the challenge of etching Ni has prevented its adoption into manufacturing. We propose a new absorber material that infuses Ni nanoparticles into the TaN host medium, allowing for the use of established Ta etching chemistry. A thinner is absorber is created due to the enhanced absorption properties of the Ni-Ta nano-composite material. Finite integral method and effective medium theory-based transfer matrix method have been independently developed to analyze the performance of the nano-composite absorption layer. We show that inserting 15% volume fraction Ni nanoparticles into 40-nm of TaN absorber material can reduce the reflection below 2% over the EUV range. Numerical simulations confirm that the reduced reflectivity is due to the increased absorption of Ni, while scattering only contributes to approximately 0.2% of the reduction in reflectivity.

  4. Oriented free-standing ammonium vanadium oxide nanobelt membranes: highly selective absorbent materials.

    PubMed

    Zou, Rujia; Zhang, Zhenyu; Yu, Li; Tian, Qiwei; Wu, Jianghong; Sun, Yangang; Chen, Zhigang; Hu, Junqing

    2010-12-27

    Highly selective, absorbent, free-standing, paper-like membranes made of ammonium vanadium oxide (NH(4)V(4)O(14)) nanobelts have been engineered by taking advantage of the nanoscaled self-assembly of architectures that display a mesh structure with an average periodic pore size of about 5 to 10 nm. The NH(4)V(4)O(14) nanobelts are synthesized by using a simple hydrothermal process, and exhibit the same orientation and assemble into bundles, each about 40 to 80 nm in width, 3 to 5 nm in thickness, and up to several millimeters in length. Importantly, the as-obtained NH(4)V(4)O(14) nanobelt membranes can highly selectively absorb a variety of organic solvents, covering both polar and non-polar solvents, for example, the absorbent capacity of glycol is 28 times as high as the initial weight of the membrane, and it can even separate organic solvents with similar polarities and absorb solid contaminants in organic solvents. These highly selective, absorbent membrane materials can be an ideal candidate for the separation and removal of pollution in industrial and environmental applications.

  5. Research and application of kapok fiber as an absorbing material: a mini review.

    PubMed

    Zheng, Yian; Wang, Jintao; Zhu, Yongfeng; Wang, Aiqin

    2015-01-01

    Kapok fiber corresponds to the seed hairs of the kapok tree (Ceiba pentandra), and is a typical cellulosic fiber with the features of thin cell wall, large lumen, low density and hydrophobic-oleophilic properties. As a type of renewable natural plant fiber, kapok fiber is abundant, biocompatible and biodegradable, and its full exploration and potential application have received increasing attention in both academic and industrial fields. Based on the structure and properties of kapok fiber, this review provides a summary of recent research on kapok fiber including chemical and physical treatments, kapok fiber-based composite materials, and the application of kapok fiber as an absorbent material for oils, metal ions, dyes, and sound, with special attention to its use as an oil-absorbing material, one predominant application of kapok fiber in the coming future.

  6. Absorbable or nonabsorbable suture materials for closure of the dura mater?

    PubMed

    Vällfors, B; Hansson, H A; Svensson, J

    1981-10-01

    This study was undertaken to determine which suture material would give the best results for closure of the dura mater. Because there is no need for the suture to remain longer than until healing has occurred and as remaining foreign material will predispose to foreign body reactions and infection, it was considered important to test new absorbable materials like polyglactin 910 (Vicryl) and polyglycolic acid (Dexon) for closure of the dura mater. The reactions from these materials were compared to those of silk and polyester (Ethibond) in dogs 60 days after the suture of dural incisions. The quality of healing with respect to the smoothness of the subdural surface, the presence of adhesions between sutures and the brain surface, the degree of absorption of the material, and reactions around the sutures were evaluated. Vicryl gave the best results, providing a smooth subdural surface without adhesions. It was almost totally absorbed when healing was completed, in contrast to Dexon and the other materials. The cellular reaction around Vicryl was slight. Silk, Ethibond, and Dexon protruded from the subdural surface and adhesions to the arachnoid were common. When the dura mater was removed, these adhesions tore off the leptomeninges with their vascular supply to the cortex. The results of these experiments seem to justify the recommendation of Vicryl for suturing of the dura mater. Such an absorbable material decreases the risk of foreign body reactions, and infections will be more easily combated because of the absence of foreign material. The lack of subdural adhesions is an advantage if reoperation is necessary.

  7. Evaluations of diapers containing absorbent gelling material with conventional disposable diapers in newborn infants.

    PubMed

    Lane, A T; Rehder, P A; Helm, K

    1990-03-01

    We evaluated 149 infants diapered in either conventional cellulose core disposable diapers or diapers containing cellulose core with absorbent gelling material. The infants were evaluated from 1 day of age to 14 weeks of age for the prevalence and severity of diaper dermatitis. We identified a low prevalence of diaper dermatitis throughout the study period. At 14 weeks of age, we noted that infants in diapers containing absorbent gelling material had significantly less diaper dermatitis than those in conventional disposable diapers. Despite the overall low prevalence of diaper dermatitis in the newborn period, 7 of 204 infants evaluated had small skin erosions in the diaper area noted within the first 4 days of age. Both diaper types were associated with infants with erosions. This surprisingly high incidence of erosions in newborn infants suggests previously undocumented increased skin fragility of full-term infants.

  8. A novel quaternary solid solution photo-absorber material for photoelectrochemical hydrogen generation.

    PubMed

    Hong, Tiantian; Liu, Zhifeng; Yan, Weiguo; Wang, Bo; Zhang, Xueqi; Liu, Junqi; Wang, Junkai; Han, Jianhua

    2015-09-14

    We report a novel quaternary solid solution (Ag-Cu-Sb-S or ACSS) serving as a photo-absorber material in the photoelectrochemical field for the first time, and ZnO/ACSS nanoarrays exhibited a photocurrent density of 4.45 mA cm(-2). The research indicates that ZnO/ACSS composite structures have enormous potential in PEC hydrogen generation systems.

  9. Optical response of strongly absorbing inhomogeneous materials: Application to paper degradation

    NASA Astrophysics Data System (ADS)

    Missori, M.; Pulci, O.; Teodonio, L.; Violante, C.; Kupchak, I.; Bagniuk, J.; Łojewska, J.; Conte, A. Mosca

    2014-02-01

    In this paper, we present a new noninvasive and nondestructive approach to recover scattering and absorption coefficients from reflectance measurements of highly absorbing and optically inhomogeneous media. Our approach is based on the Yang and Miklavcic theoretical model of light propagation through turbid media, which is a generalization of the Kubelka-Munk theory, extended to accommodate optically thick samples. We show its applications to paper, a material primarily composed of a web of fibers of cellulose, whose optical properties are strongly governed by light scattering effects. Samples studied were ancient and industrial paper sheets, aged in different conditions and highly absorbing in the ultraviolet region. The recovered experimental absorptions of cellulose fibers have been compared to theoretical ab initio quantum-mechanical computational simulations carried out within time-dependent density functional theory. In this way, for each sample, we evaluate the absolute concentration of different kinds of oxidized groups formed upon aging and acting as chromophores causing paper discoloration. We found that the relative concentration of different chromophores in cellulose fibers depends on the aging temperature endured by samples. This clearly indicates that the oxidation of cellulose follows temperature-dependent reaction pathways. Our approach has a wide range of applications for cellulose-based materials, like paper, textiles, and other manufactured products of great industrial and cultural interest, and can potentially be extended to other strongly absorbing inhomogeneous materials.

  10. An antibacterial and absorbable silk-based fixation material with impressive mechanical properties and biocompatibility

    PubMed Central

    Shi, Chenglong; Pu, Xiaobing; Zheng, Guan; Feng, Xinglong; Yang, Xuan; Zhang, Baoliang; Zhang, Yu; Yin, Qingshui; Xia, Hong

    2016-01-01

    Implant-associated infections and non-absorbing materials are two important reasons for a second surgical procedure to remove internal fixation devices after an orthopedic internal fixation surgery. The objective of this study was to produce an antibacterial and absorbable fixation screw by adding gentamicin to silk-based materials. The antibacterial activity was assessed against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) in vitro by plate cultivation and scanning electron microscopy (SEM). We also investigated the properties, such as the mechanical features, swelling properties, biocompatibility and degradation, of gentamicin-loaded silk-based screws (GSS) in vitro. The GSS showed significant bactericidal effects against S. aureus and E. coli. The antibacterial activity remained high even after 4 weeks of immersion in protease solution. In addition, the GSS maintained the remarkable mechanical properties and excellent biocompatibility of pure silk-based screws (PSS). Interestingly, after gentamicin incorporation, the degradation rate and water-absorbing capacity increased and decreased, respectively. These GSS provide both impressive material properties and antibacterial activity and have great potential for use in orthopedic implants to reduce the incidence of second surgeries. PMID:27869175

  11. Decontamination of skin exposed to nanocarriers using an absorbent textile material and PEG-12 dimethicone

    NASA Astrophysics Data System (ADS)

    Lademann, J.; Richter, H.; Baier, G.; Landfester, K.; Frazier, L.; Gefeller, H.; Wunderlich, U.; Gross, I.; Rühl, E.; Knorr, F.

    2014-11-01

    The removal of noxious particulate contaminants such as pollutants derived from particle-to-gas conversions from exposed skin is essential to avoid the permeation of potentially harmful substances into deeper skin layers via the stratum corneum or the skin appendages and their dispersion throughout the circulatory system. This study is aimed at evaluating the efficacy of using the silicone glycol polymer PEG-12 dimethicone and an absorbent textile material to remove fluorescing hydroxyethyl starch nanocapsules implemented as model contaminants from exposed porcine ear skin. Using laser scanning microscopy, it could be shown that while the application and subsequent removal of the absorbent textile material alone did not result in sufficient decontamination, the combined application with PEG-12 dimethicone almost completely eliminated the nanocapsules from the surface of the skin. By acting as a wetting agent, PEG-12 dimethicone enabled the transfer of the nanocapsules into a liquid phase which was taken up by the absorbent textile material. Only traces of fluorescence remained detectable in several skin furrows and follicular orifices, suggesting that the repeated implementation of the procedure may be necessary to achieve total skin surface decontamination.

  12. An antibacterial and absorbable silk-based fixation material with impressive mechanical properties and biocompatibility

    NASA Astrophysics Data System (ADS)

    Shi, Chenglong; Pu, Xiaobing; Zheng, Guan; Feng, Xinglong; Yang, Xuan; Zhang, Baoliang; Zhang, Yu; Yin, Qingshui; Xia, Hong

    2016-11-01

    Implant-associated infections and non-absorbing materials are two important reasons for a second surgical procedure to remove internal fixation devices after an orthopedic internal fixation surgery. The objective of this study was to produce an antibacterial and absorbable fixation screw by adding gentamicin to silk-based materials. The antibacterial activity was assessed against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) in vitro by plate cultivation and scanning electron microscopy (SEM). We also investigated the properties, such as the mechanical features, swelling properties, biocompatibility and degradation, of gentamicin-loaded silk-based screws (GSS) in vitro. The GSS showed significant bactericidal effects against S. aureus and E. coli. The antibacterial activity remained high even after 4 weeks of immersion in protease solution. In addition, the GSS maintained the remarkable mechanical properties and excellent biocompatibility of pure silk-based screws (PSS). Interestingly, after gentamicin incorporation, the degradation rate and water-absorbing capacity increased and decreased, respectively. These GSS provide both impressive material properties and antibacterial activity and have great potential for use in orthopedic implants to reduce the incidence of second surgeries.

  13. All-Metal Magnetic RAM

    NASA Technical Reports Server (NTRS)

    Torok, E. J.; Spitzer, R.

    2000-01-01

    The factors that enter into the development of an all-metal, nonvolatile magnetic RAM, in which multilayer giant magnetoresistive films are used for all functions - storage, readout, and support electronics - are described. Four significant characteristics are expected to favor all-metal over hybrid magnetic RAM. First, silicon-technology fabrication requires a large number of masking steps, including complex ones such as ion implantation. Conversely, all-metal technology is inherently simple: fewer masking steps, no doping, scaling to lithographic limits, very little operating power. Second, the all-metal footprint is significantly smaller than the hybrid one. Third, an all-metal RAM is expected to be able to be miniaturized to lithographic limits; miniaturization of hybrid magnetic RAMs is likely to be limited by the semiconductor circuitry. Finally, semiconductor processing and magnetic processing in MRAM are done separately because the former requires high temperatures, whereas magnetic fabrication is a low-temperature process. By contrast, because both GMR electronics and the memory elements are made of the same materials, the two major components are deposited and patterned concurrently on the same substrate.

  14. Super water-absorbing new material from chitosan, EDTA and urea.

    PubMed

    Narayanan, Abathodharanan; Dhamodharan, Raghavachari

    2015-12-10

    A new, super water-absorbing, material is synthesized by the reaction between chitosan, EDTA and urea and named as CHEDUR. CHEDUR is probably formed through the crosslinking of chitosan molecules (CH) with the EDTA-urea (EDUR) adduct that is formed during the reaction. CHEDUR as well as the other products formed in control reactions are characterized extensively. CHEDUR exhibits a very high water uptake capacity when compared with chitosan, chitosan-EDTA adduct, as well as a commercial diaper material. A systematic study was done to find the optimum composition as well as reaction conditions for maximum water absorbing capacity. CHEDUR can play a vital role in applications that demand the rapid absorption and slow release of water such as agriculture, as a three in one new material for the slow release of urea, water and other metal ions that can be attached through the EDTA component. The other potential advantage of CHEDUR is that it can be expected to degrade in soil based on its chitosan backbone. The new material with rapid and high water uptake could also find potential applications as biodegradable active ingredient of the diaper material.

  15. Development of microwave absorbing materials prepared from a polymer binder including Japanese lacquer and epoxy resin

    NASA Astrophysics Data System (ADS)

    Iwamaru, T.; Katsumata, H.; Uekusa, S.; Ooyagi, H.; Ishimura, T.; Miyakoshi, T.

    Microwave absorption composites were synthesized from a poly urushiol epoxy resin (PUE) mixed with one of microwave absorbing materials; Ni-Zn ferrite, Soot, Black lead, and carbon nano tube (CNT) to investigate their microwave absorption properties. PUE binders were specially made from Japanese lacquer and epoxy resin, where Japanese lacquer has been traditionally used for bond and paint because it has excellent beauty. Japanese lacquer solidifies with oxygen contained in air's moisture, which has difficulty in making composite, but we improved Japanese lacquer's solidification properties by use of epoxy resin. We made 10 mm thickness composite samples and cut them into toroidal shape to measure permittivity, permeability, and reflection loss in frequencies ranging from 50 Hz to 20 GHz. Electric magnetic absorber's composites synthesized from a PUE binders mixed either with Soot or CNT showed significantly higher wave absorption over -27 dB than the others at frequencies around 18 GHz, although Japanese lacquer itself doesn't affect absorption. This means Japanese lacquer can be used as binder materials for microwave absorbers.

  16. Evaluation of polypropylene and poly (butylmethacrylate-co-hydroxyethylmethacrylate) nonwoven material as oil absorbent.

    PubMed

    Zhao, Jian; Xiao, Changfa; Xu, Naiku

    2013-06-01

    Polypropylene (PP) and poly(butylmethacrylate-co-hydroxyethylmethacrylate) (PBMA-co-HEMA) nonwoven materials as oil absorbents have been fabricated for the first time via melt blown method. As-prepared nonwovens were investigated in terms of mass per unit area, density, air permeability, contact angle, and morphology observations for fiber diameter distribution and single fiber surface by a field emission scanning electron microscope. The nonwovens are demonstrated as fast and efficient absorbents for various kinds of oils with oil absorbency up to seven to ten times their own weight. The nonwovens show excellent water repulsion but superoleophilic properties. The measured contact angles for water and toluene are more than 127° and ca. 0°, respectively. The addition of PBMA-co-HEMA makes the nonwoven surface more hydrophobic while conserving superoleophilicity. Compared with PP nonwoven, broad diameter distribution of the blend nonwoven is attributed to poor melt fluidity of PBMA-co-HEMA. In terms of single fiber, coarse surface and the presence of point-like convexities lead to the fibers being more readily wetted by oil. More interesting, oil-water separation and oil recovery can be easily carried out by filter and absorption-desorption process, the recovered materials contained hardly any oil droplet and could be reused for next cycles.

  17. Carbon nanotube scaffolds with controlled porosity as electromagnetic absorbing materials in the gigahertz range.

    PubMed

    González, M; Crespo, M; Baselga, J; Pozuelo, J

    2016-05-19

    Control of the microscopic structure of CNT nanocomposites allows modulation of the electromagnetic shielding in the gigahertz range. The porosity of CNT scaffolds has been controlled by two freezing protocols and a subsequent lyophilization step: fast freezing in liquid nitrogen and slow freezing at -20 °C. Mercury porosimetry shows that slowly frozen specimens present a more open pore size (100-150 μm) with a narrow distribution whereas specimens frozen rapidly show a smaller pore size and a heterogeneous distribution. 3D-scaffolds containing 3, 4, 6 and 7% CNT were infiltrated with epoxy and specimens with 2, 5 and 8 mm thicknesses were characterized in the GHz range. Samples with the highest pore size and porosity presented the lowest reflected power (about 30%) and the highest absorbed power (about 70%), which allows considering them as electromagnetic radiation absorbing materials.

  18. Aging behavior of polymeric solar absorber materials: Aging on the component level

    SciTech Connect

    Kahlen, S.; Wallner, G.M.; Lang, R.W.; Meir, M.; Rekstad, J.

    2010-03-15

    Within this study, the aging behavior of a PPE + PS absorber material was investigated on the absorber component level. To indicate aging, characteristic mechanical values were determined by indentation tests of specimens taken from components and exposed to laboratory aging (140 C in air, 80 C in water) and service near outdoor aging conditions (stagnation in northern climate). In addition to the mechanical tests, the unaged and aged specimens were also characterized thermo-analytically via differential scanning calorimetry (DSC). The results indicate that reductions in both characteristic mechanical values of the indentation tests, i.e., load of the first transition and ultimate indentation, reflect at least some physical aging although chemical aging may also be of importance based on previous analytical investigations of laboratory aged polymer films. While laboratory aging in air at 140 C and service exposure at a test facility in Oslo (N) under stagnation conditions led to a significant reduction in the mechanical indentation resistance, no influence of laboratory aging in water at 80 C on the mechanical behavior of the absorber sheet was found. Depending on the ultimate failure criterion applied (reduction of characteristic mechanical values to 80% and 50%, respectively), the technical service life found for hot air laboratory and stagnation service conditions was found to be less than 51 and 159 h, respectively. As these durations are significantly below the estimated stagnation conditions accumulated in the desired operation lifetime for such a collector, the PPE + PS type investigated does not seem to be a proper material candidate for solar thermal absorbers. Finally, based on the results obtained, a relation between laboratory aging time in air at 140 C and cumulated irradiation energy during exposure on the test facility in Oslo was established. (author)

  19. Method and apparatus for determining the content and distribution of a thermal neutron absorbing material in an object

    DOEpatents

    Crane, Thomas W.

    1986-01-01

    The disclosure is directed to an apparatus and method for determining the content and distribution of a thermal neutron absorbing material within an object. Neutrons having an energy higher than thermal neutrons are generated and thermalized. The thermal neutrons are detected and counted. The object is placed between the neutron generator and the neutron detector. The reduction in the neutron flux corresponds to the amount of thermal neutron absorbing material in the object. The object is advanced past the neutron generator and neutron detector to obtain neutron flux data for each segment of the object. The object may comprise a space reactor heat pipe and the thermal neutron absorbing material may comprise lithium.

  20. Method and apparatus for determining the content and distribution of a thermal neutron absorbing material in an object

    DOEpatents

    Crane, T.W.

    1983-12-21

    The disclosure is directed to an apparatus and method for determining the content and distribution of a thermal neutron absorbing material within an object. Neutrons having an energy higher than thermal neutrons are generated and thermalized. The thermal neutrons are detected and counted. The object is placed between the neutron generator and the neutron detector. The reduction in the neutron flux corresponds to the amount of thermal neutron absorbing material in the object. The object is advanced past the neutron generator and neutron detector to obtain neutron flux data for each segment of the object. The object may comprise a space reactor heat pipe and the thermal neutron absorbing material may comprise lithium.

  1. The NuSTAR View of Reflecting and Absorbing Circumnuclear Material in AGN

    NASA Astrophysics Data System (ADS)

    Rivers, Elizabeth

    2016-04-01

    The physical conditions and precise geometry of the accreting circumnuclear material in the vicinity of supermassive black holes remain open and critical questions. Between July 2012 and February 2013, NuSTAR and XMM-Newton performed four long-look joint observations of the type 1.8 Seyfert, NGC 1365. We have analyzed the variable absorption seen in these observations in order to characterize the geometry of the absorbing material. Two of the observations caught NGC 1365 in an unusually low absorption state, revealing complexity in the multi-layer absorbers which had previously been hidden, including a the Compton-thick torus, BLR clouds, and a patchy absorber with a variable column around 1022 cm-2 and a line of sight covering fraction of 0.3-0.9 which responds directly to the intrinsic source flux, possibly due to a wind geometry. We have also analyzed two NuSTAR observations of NGC 7582, a well-studied X-ray bright Seyfert 2 with moderately heavy highly variable absorption and strong reflection spectral features. Changes in the spectral shape and high reflection fractions have led to competing explanations: 1) the central X-ray source partially “shut off”, decreasing in intrinsic luminosity, with a delayed decrease in reflection features due to the light-crossing time of the Compton-thick material or 2) the source became more heavily obscured, with only a portion of the power law continuum leaking through. The high quality of the NuSTAR spectra above 10 keV give us the best look at the reflection hump to date and allow us to test these two scenarios.

  2. Nanostructured thin film-based near-infrared tunable perfect absorber using phase-change material

    NASA Astrophysics Data System (ADS)

    Kocer, Hasan

    2015-01-01

    Nanostructured thin film absorbers embedded with phase-change thermochromic material can provide a large level of absorption tunability in the near-infrared region. Vanadium dioxide was employed as the phase-change material in the designed structures. The optical absorption properties of the designed structures with respect to the geometric and material parameters were systematically investigated using finite-difference time-domain computations. Absorption level of the resonance wavelength in the near-IR region was tuned from the perfect absorption level to a low level (17%) with a high positive dynamic range of near-infrared absorption intensity tunability (83%). Due to the phase transition of vanadium dioxide, the resonance at the near-infrared region is being turned on and turned off actively and reversibly under the thermal bias, thereby rendering these nanostructures suitable for infrared camouflage, emitters, and sensors.

  3. Grating-type mid-infrared light absorber based on silicon carbide material.

    PubMed

    Xue, Wenrui; Chen, Xi; Peng, Yanling; Yang, Rongcao

    2016-10-03

    A kind of grating-type mid-infrared light absorber based on silicon carbide (SiC) material is designed and its absorption properties are studied using the finite-difference frequency-domain (FDFD) method. The results show that, its absorption mechanism is the excitation of surface plasmon and magnetic polariton as well as the loss of materials. Due to the optical characteristics of the SiC material in the mid-infrared band and the truncated pyramid structure in the grating, in the range of 10.5-12.5μm and 0-80°, absorptivity of higher than 80% can be obtained with optimized structural parameters. Among six structural parameters, the layer number of the composite layers has a relatively great influence on the absorption properties, while the thickness of the dielectric layer has less influence on the absorption properties.

  4. Does the composition of urine change when collected from disposable diapers and other absorbent materials?

    PubMed

    Ye, Xiaoyun; Zhou, Xiaoliu; Bishop, Amber M; Needham, Larry L; Calafat, Antonia M

    2010-11-01

    The free and conjugated urinary species of non-persistent environmental chemicals or their breakdown products are valid human exposure biomarkers. For convenience, disposable diapers and other absorbent materials are widely used to collect urine specimens from infants and young toddlers. However, the extent to which the different urinary species of the target analytes and other components are recovered after the urine is extracted from these absorbent materials is unknown. In this proof-of-concept study, we investigated the extraction recovery from disposable diapers, cotton pads, and gauzes of the free versus glucuronidated urinary species of three example chemicals: bisphenol A, triclosan, and 4-methylumbelliferone. Although the glucuronides were almost fully recovered, the free species were not. Our results suggest that, in addition to other sampling considerations, the binding affinity and extraction recovery of the target biomarkers to the material used to collect the urine should be considered. Alternative collection approaches that do not require such an extraction (e.g., urine bags routinely used in hospitals) may be worth exploring. Despite its shortcomings, having urinary concentrations for biomonitoring considerably strengthens the exposure assessment, particularly for infants and young toddlers, and the benefits of including biomonitoring data outweigh their potential limitations.

  5. Ram Burn Observations (RAMBO)

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Ram Burn Observations (RAMBO) is a Department of Defense experiment that observes shuttle Orbital Maneuvering System engine burns for the purpose of improving plume models. On STS-107 the appropriate sensors will observe selected rendezvous and orbit adjust burns.

  6. Ram jet engine

    SciTech Connect

    Crispin, B.; Pohl, W.D.; Thomaier, D.; Voss, N.

    1983-11-29

    In a ram jet engine, a tubular combustion chamber is divided into a flame chamber followed by a mixing chamber. The ram air is supplied through intake diffusers located on the exterior of the combustion chamber. The intake diffusers supply combustion air directly into the flame chamber and secondary air is conveyed along the exterior of the combustion chambers and then supplied directly into the mixing chamber.

  7. SQL-RAMS

    NASA Technical Reports Server (NTRS)

    Alfaro, Victor O.; Casey, Nancy J.

    2005-01-01

    SQL-RAMS (where "SQL" signifies Structured Query Language and "RAMS" signifies Rocketdyne Automated Management System) is a successor to the legacy version of RAMS a computer program used to manage all work, nonconformance, corrective action, and configuration management on rocket engines and ground support equipment at Stennis Space Center. The legacy version resided in the FileMaker Pro software system and was constructed in modules that could act as stand-alone programs. There was little or no integration among modules. Because of limitations on file-management capabilities in FileMaker Pro, and because of difficulty of integration of FileMaker Pro with other software systems for exchange of data using such industry standards as SQL, the legacy version of RAMS proved to be limited, and working to circumvent its limitations too time-consuming. In contrast, SQL-RAMS is an integrated SQL-server-based program that supports all data-exchange software industry standards. Whereas in the legacy version, it was necessary to access individual modules to gain insight to a particular work-status documents, SQL-RAMS provides access through a single-screen presentation of core modules. In addition, SQL-RAMS enable rapid and efficient filtering of displayed statuses by predefined categories and test numbers. SQL-RAMS is rich in functionality and encompasses significant improvements over the legacy system. It provides users the ability to perform many tasks which in the past required administrator intervention. Additionally many of the design limitations have been corrected allowing for a robust application that is user centric.

  8. SQL-RAMS

    NASA Technical Reports Server (NTRS)

    Alfaro, Victor O.; Casey, Nancy J.

    2005-01-01

    SQL-RAMS (where "SQL" signifies Structured Query Language and "RAMS" signifies Rocketdyne Automated Management System) is a successor to the legacy version of RAMS -- a computer program used to manage all work, nonconformance, corrective action, and configuration management on rocket engines and ground support equipment at Stennis Space Center. The legacy version resided in the File-Maker Pro software system and was constructed in modules that could act as standalone programs. There was little or no integration among modules. Because of limitations on file-management capabilities in FileMaker Pro, and because of difficulty of integration of FileMaker Pro with other software systems for exchange of data using such industry standards as SQL, the legacy version of RAMS proved to be limited, and working to circumvent its limitations too time-consuming. In contrast, SQL-RAMS is an integrated SQL-server-based program that supports all data-exchange software industry standards. Whereas in the legacy version, it was necessary to access individual modules to gain insight into a particular workstatus document, SQL-RAMS provides access through a single-screen presentation of core modules. In addition, SQL-RAMS enables rapid and efficient filtering of displayed statuses by predefined categories and test numbers. SQL-RAMS is rich in functionality and encompasses significant improvements over the legacy system. It provides users the ability to perform many tasks, which in the past required administrator intervention. Additionally, many of the design limitations have been corrected, allowing for a robust application that is user centric.

  9. Study on metal microparticle content of the material transferred with Absorbing Film Assisted Laser Induced Forward Transfer when using silver absorbing layer

    NASA Astrophysics Data System (ADS)

    Smausz, T.; Hopp, B.; Kecskeméti, G.; Bor, Z.

    2006-04-01

    Absorbing Film Assisted Laser Induced Forward Transfer (AFA-LIFT) is a modified LIFT method where a high absorption coefficient thin film coating of a transparent substrate is used to transform the laser energy into kinetic in order to transfer the "target" material spread on it. This method can be used for the transfer of biomaterials and living cells, which could be damaged by direct irradiation of the laser beam. In previous experiments, ˜50-100 nm thick metal films have been used as absorbing layer. The transferred material can also contain metal microparticles originating from the absorbing thin film and acting as non-desired impurities in some cases. The aim of our work was to study how the properties (number, size and covered area) of metal particles transferred during the AFA-LIFT process depend on film thickness and the applied fluence. Silver thin films with different thickness (50-400 nm) were used as absorbing layers and real experimental conditions were modeled by a 100 μm thick water layer. The particles transferred without the use of water layer were also studied. The threshold laser fluence for the complete removal of the absorber from the irradiated area was found to strongly increase with increasing film thickness. The deposited micrometer and submicrometer particles were observed with optical microscope and atomic force microscope. Their size ranged from 100 nm to 20 μm and depended on the laser fluence. The increase in fluence resulted in an increasing number of particles of smaller average size.

  10. Scientists Identify New Quaternary Materials for Solar Cell Absorbers (Fact Sheet), NREL Highlights, Science

    SciTech Connect

    Not Available

    2011-10-01

    Research provides insight for exploring use of earth-abundant quaternary semiconductors for large-scale solar cell applications. For large-scale solar electricity generation, it is critical to find new material that is Earth abundant and easily manufactured. Previous experimental studies suggest that Cu{sub 2}ZnSnS{sub 4} could be a strong candidate absorber materials for large-scale thin-film solar cells due to its optimal bandgap, high adsorption coefficient, and ease of synthesis. However, due to the complicated nature of the quaternary compound, it is unclear whether other quaternary compounds have physical properties suitable for solar cell application. Researchers at the National Renewable Energy Laboratory (NREL), Fudan University, and University College London have performed systematic searches of quaternary semiconductors using a sequential cation mutation method in which the material properties of the quaternary compounds can be derived and understood through the evolution from the binary, to ternary, and to quaternary compounds. The searches revealed that in addition to Cu{sub 2}ZnSnS{sub 4}, Cu{sub 2}ZnGeSe{sub 4} and Cu{sub 2}ZnSnSe{sub 4} are also suitable quaternary materials for solar cell absorbers. Through the extensive study of defect and alloy properties of these materials, the researchers propose that to maximize solar cell performance, growth of Cu{sub 2}ZnSnS{sub 4} under Cu-poor/Zn-rich conditions will be optimal and the formation of Cu{sub 2}ZnSn(S,Se){sub 4} alloy will be beneficial in improving solar cell performance.

  11. Ram-jet Performance

    NASA Technical Reports Server (NTRS)

    Cervenko, A. J.; Friedman, R.

    1956-01-01

    The ram jet is basically one of the most dimple types of aircraft engine. It consists only of an inlet diffuser, a combustion system, and an exit nozzle. A typical ram-jet configuration is shown in figure 128. The engine operates on the Brayton cycle, and ideal cycle efficiency depends only on the ratio of engine to ambient pressure. The increased, engine pressures are obtained by ram action alone, and for this reason the ram jet has zero thrust at zero speed. Therefore, ram-jet-powered aircraft must be boosted to flight speeds close to a Mach number of 1.0 before appreciable thrust is generated by the engine. Since pressure increases are obtained by ram action alone, combustor-inlet pressures and temperatures are controlled by the flight speed, the ambient atmospheric condition, and by the efficiency of the inlet diffuser. These pressures and temperatures, as functions of flight speed and altitude, are shown in figure 129 for the NACA standard atmosphere and for practical values of diffuser efficiency. It can be seen that very wide ranges of combustor-inlet temperatures and pressures may be encountered over the ranges of flight velocity and altitude at which ram jets may be operated. Combustor-inlet temperatures from 500 degrees to 1500 degrees R and inlet pressures from 5 to 100 pounds per square inch absolute represent the approximate ranges of interest in current combustor development work. Since the ram jet has no moving parts in the combustor outlet, higher exhaust-gas temperatures than those used in current turbojets are permissible. Therefore, fuel-air ratios equivalent to maximum rates of air specific impulse or heat release can be used, and, for hydrocarbon fuels, this weight ratio is about 0.070. Lower fuel-air ratios down to about 0.015 may also be required to permit efficient cruise operation. This fuel-air-ratio range of 0.015 to 0.070 used in ram jets can be compared with the fuel-air ratios up to 0.025 encountered in current turbojets. Ram

  12. All-GaInNAs ultrafast lasers: Material development for emitters and absorbers

    NASA Astrophysics Data System (ADS)

    Rutz, A.; Liverini, V.; Müller, E.; Schön, S.; Keller, U.

    2007-04-01

    Defect engineering is a key feature in material development for active and passive laser devices. Active devices such as surface emitting lasers require excellent material quality with low defect concentration and good strain management. In contrast, passive devices such as saturable absorbers benefit from nonradiative recombination via defect states. Different molecular beam epitaxy (MBE) growth conditions and annealing parameters were developed to optimize GaInNAs for both active and passive devices. We have demonstrated for the first time an all-GaInNAs modelocked vertical external-cavity surface-emitting laser (VECSEL) at 1.3 μm. We combined a GaInNAs VECSEL with a GaInNAs semiconductor saturable absorber mirror (SESAM) in a laser cavity. The VECSEL was optically pumped by an 808 nm semiconductor diode laser. The intracavity GaInNAs SESAM self-starts stable modelocking and generates a pulse duration of 18.7 ps with a pulse repetition rate of 6.1 GHz at 57 mW of average output power at a center wavelength of 1308 nm. In this paper, we briefly review the modelocking result and then focus on the MBE growth and fabrication of both active and passive GaInNAs devices.

  13. High-volume use of self-cementing spray dry absorber material for structural applications

    NASA Astrophysics Data System (ADS)

    Riley, Charles E.

    Spray dry absorber (SDA) material, or spray dryer ash, is a byproduct of energy generation by coal combustion and sulfur emissions controls. Like any resource, it ought to be used to its fullest potential offsetting as many of the negative environmental impacts of coal combustion as possible throughout its lifecycle. Its cementitious and pozzolanic properties suggest it be used to augment or replace another energy and emissions intensive product: Portland cement. There is excellent potential for spray dryer ash to be used beneficially in structural applications, which will offset CO2 emissions due to Portland cement production, divert landfill waste by further utilizing a plentiful coal combustion by-product, and create more durable and sustainable structures. The research into beneficial use applications for SDA material is relatively undeveloped and the material is highly underutilized. This dissertation explored a specific self-cementing spray dryer ash for use as a binder in structural materials. Strength and stiffness properties of hydrated spray dryer ash mortars were improved by chemical activation with Portland cement and reinforcement with polymer fibers from automobile tire recycling. Portland cement at additions of five percent of the cementitious material was found to function effectively as an activating agent for spray dryer ash and had a significant impact on the hardened properties. The recycled polymer fibers improved the ductility and toughness of the material in all cases and increased the compressive strength of weak matrix materials like the pure hydrated ash. The resulting hardened materials exhibited useful properties that were sufficient to suggest that they be used in structural applications such as concrete, masonry block, or as a hydraulic cement binder. While the long-term performance characteristics remain to be investigated, from an embodied-energy and carbon emissions standpoint the material investigated here is far superior to

  14. Neutron-Absorbing Coatings for Safe Storage of Fissile Materials with Enhanced Shielding & Criticality Safety

    SciTech Connect

    Choi, J; Farmer, J; Lee, C; Fischer, L; Boussoufi, M; Liu, B; Egbert, H

    2007-07-03

    Neutron-absorbing Fe-based amorphous-metal coatings have been developed that are more corrosion resistant than other criticality-control materials, including Al-B{sub 4}C composites, borated stainless steels, and Ni-Cr-Mo-Gd alloys. The presence of relatively high concentration of boron in these coatings not only enhances its neutron-absorption capability, but also enables these coatings to exist in the amorphous state. Exceptional corrosion resistance has been achieved with these Fe-based amorphous-metal alloys through additions of chromium, molybdenum, and tungsten. The addition of rare earth elements such as yttrium has lowered the critical cooling rate of these materials, thereby rendering them more easily processed. Containers used for the storage of nuclear materials, and protected from corrosion through the application of amorphous metal coatings, would have greatly enhanced service lives, and would therefore provide greater long-term safety. Amorphous alloy powders have been successfully produced in multi-ton quantities with gas atomization, and applied to several half-scale spent fuel storage containers and criticality control structures with the high-velocity oxy-fuel (HVOF) thermal spray process. Salt fog testing and neutron radiography of these prototypes indicates that such an approach is viable for the production of large-scale industrial-scale facilities and containers. The use of these durable neutron-absorbing materials to coat stainless steel containers and storage racks, as well as vaults, hot-cell facilities and glove boxes could substantially reduce the risk of criticality in the event of an accident. These materials are particularly attractive for shielding applications since they are fire proof. Additionally, layers of other cold and thermal sprayed materials that include carbon and/or carbides can be used in conjunction with the high-boron amorphous metal coatings for the purpose of moderation. For example, various carbides, including boron

  15. Molecular Dynamics of a Water-Absorbent Nanoscale Material Based on Chitosan.

    PubMed

    Borca, Carlos H; Arango, Carlos A

    2016-04-21

    Although hydrogels have been widely investigated for their use in materials science, nanotechnology, and novel pharmaceuticals, mechanistic details explaining their water-absorbent features are not well understood. We performed an all-atom molecular dynamics study of the structural transformation of chitosan nanohydrogels due to water absorption. We analyzed the conformation of dry, nanoscaled chitosan, the structural modifications that emerge during the process of water inclusion, and the dynamics of this biopolymer in the presence of nature's solvent. Two sets of nanoscaled, single-chained chitosan models were simulated: one to study the swelling dependence upon the degree of self-cross-linking and other to observe the response with respect to the degree of protonation. We verified that nanohydrogels keep their ability to absorb water and grow, regardless of their degree of cross-linking. Noteworthy, we found that the swelling behavior of nanoscaled chitosan is pH-dependent, and it is considerably more limited than that of larger scale hydrogels. Thus, our study suggests that properties of nanohydrogels are significantly different from those of larger hydrogels. These findings might be important in the design of novel controlled-release and targeted drug-delivery systems based on chitosan.

  16. Measurements of the light-absorbing material inside cloud droplets and its effect on cloud albedo

    NASA Technical Reports Server (NTRS)

    Twohy, C. H.; Clarke, A. D.; Warren, Stephen G.; Radke, L. F.; Charleson, R. J.

    1990-01-01

    Most of the measurements of light-absorbing aerosol particles made previously have been in non-cloudy air and therefore provide no insight into aerosol effects on cloud properties. Here, researchers describe an experiment designed to measure light absorption exclusively due to substances inside cloud droplets, compare the results to related light absorption measurements, and evaluate possible effects on the albedo of clouds. The results of this study validate those of Twomey and Cocks and show that the measured levels of light-absorbing material are negligible for the radiative properties of realistic clouds. For the measured clouds, which appear to have been moderately polluted, the amount of elemental carbon (EC) present was insufficient to affect albedo. Much higher contaminant levels or much larger droplets than those measured would be necessary to significantly alter the radiative properties. The effect of the concentrations of EC actually measured on the albedo of snow, however, would be much more pronounced since, in contrast to clouds, snowpacks are usually optically semi-infinite and have large particle sizes.

  17. Ram and buck management.

    PubMed

    Ridler, A L; Smith, S L; West, D M

    2012-02-01

    Careful management is necessary to ensure the reproductive success in any small ruminant farm and to maximise the productive longevity of rams and bucks. Rams and bucks are frequently overlooked outside of the breeding period, but year-round attention to nutrition, parasite control and general disease control is important in keeping them healthy and sound for breeding. Pre-mating soundness examinations are an inexpensive and relatively easy way to assess the potential ability of a ram or buck to perform during the breeding period and should be incorporated annually into the management of any flock. During the breeding period, careful thought should be given to the appropriate use of males, and the effectiveness of mating should be monitored.

  18. [A new embolic material: super absorbent polymer (SAP) microsphere and its embolic effects].

    PubMed

    Jiaqi, Y; Hori, S; Minamitani, K; Hashimoto, T; Yoshimura, H; Nomura, N; Ishida, T; Fukuda, H; Tomoda, K; Nakamura, H

    1996-01-01

    SAP-Microsphere (sodium acrylic acid-vinyl alcohol copolymer) has the ability to absorb fluids within a few minutes and increase its diameter. Its diameter can also be calibrated. The diameters in ionic contrast material and human serum are 2.1 and 3.5 times larger, respectively, than the original size. It can pass through a microcatheter with an ionic contrast material, and swells at the occluding point into the desired size. It can be recognized under fluoroscopy due to its absorption of contrast material. A total of 10 rabbit kidney embolizations were done followed by resection in 1-14 weeks. Recanalization was absent in all cases. No adhesion to the perirenal tissue was found. Limited reactive change in endothelial cells was found at one week. No changes in the smooth muscle layer were found at any time during the study. Limited infiltration of neutrophil cells was found in perivascular tissue within a period of one week. SAP-Microspheres maintained their spherical shape during a 14-week period. Extensive fibrosis and calcification were found after 4 weeks. SAP-Microspheres are promising as an embolic agent to obtain satisfactory results of embolization therapy.

  19. Organizational Impact of RAMS.

    ERIC Educational Resources Information Center

    Staebler, Mel

    A series of observations is made regarding the potential impact of the Remotely Accessible Management System (RAMS) upon the administrative structure of the Pontiac, Michigan City School System. Nine major results of the district wide needs assessment are reported, and evidence is advanced to support the conclusion that modern educational…

  20. The Ram's Horn.

    ERIC Educational Resources Information Center

    Rassias, John A., Ed.; And Others

    1983-01-01

    The summer-fall and winter-spring numbers of the journal, "The Ram's Horn," contain these articles: "The Text as Dramatic Departure"; "The Dartmouth Language Outreach Approach to Spanish for Police Action"; "The Dartmouth Intensive Language Model (DILM) in Florida: John Rassias with High School Teachers";…

  1. 2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications.

    PubMed

    Cao, Duyen H; Stoumpos, Constantinos C; Farha, Omar K; Hupp, Joseph T; Kanatzidis, Mercouri G

    2015-06-24

    We report on the fabrication and properties of the semiconducting 2D (CH3(CH2)3NH3)2(CH3NH3)(n-1)Pb(n)I(3n+1) (n = 1, 2, 3, and 4) perovskite thin films. The band gaps of the series decrease with increasing n values, from 2.24 eV (CH3(CH2)3NH3)2PbI4 (n = 1) to 1.52 eV CH3NH3PbI3 (n = ∞). The compounds exhibit strong light absorption in the visible region, accompanied by strong photoluminescence at room temperature, rendering them promising light absorbers for photovoltaic applications. Moreover, we find that thin films of the semi-2D perovskites display an ultrahigh surface coverage as a result of the unusual film self-assembly that orients the [Pb(n)I(3n+1)](-) layers perpendicular to the substrates. We have successfully implemented this 2D perovskite family in solid-state solar cells, and obtained an initial power conversion efficiency of 4.02%, featuring an open-circuit voltage (V(oc)) of 929 mV and a short-circuit current density (J(sc)) of 9.42 mA/cm(2) from the n = 3 compound. This result is even more encouraging considering that the device retains its performance after long exposure to a high-humidity environment. Overall, the homologous 2D halide perovskites define a promising class of stable and efficient light-absorbing materials for solid-state photovoltaics and other applications.

  2. Derivation of a Levelized Cost of Coating (LCOC) metric for evaluation of solar selective absorber materials

    DOE PAGES

    Ho, C. K.; Pacheco, J. E.

    2015-06-05

    A new metric, the Levelized Cost of Coating (LCOC), is derived in this paper to evaluate and compare alternative solar selective absorber coatings against a baseline coating (Pyromark 2500). In contrast to previous metrics that focused only on the optical performance of the coating, the LCOC includes costs, durability, and optical performance for more comprehensive comparisons among candidate materials. The LCOC is defined as the annualized marginal cost of the coating to produce a baseline annual thermal energy production. Costs include the cost of materials and labor for initial application and reapplication of the coating, as well as the costmore » of additional or fewer heliostats to yield the same annual thermal energy production as the baseline coating. Results show that important factors impacting the LCOC include the initial solar absorptance, thermal emittance, reapplication interval, degradation rate, reapplication cost, and downtime during reapplication. The LCOC can also be used to determine the optimal reapplication interval to minimize the levelized cost of energy production. As a result, similar methods can be applied more generally to determine the levelized cost of component for other applications and systems.« less

  3. Derivation of a Levelized Cost of Coating (LCOC) metric for evaluation of solar selective absorber materials

    SciTech Connect

    Ho, C. K.; Pacheco, J. E.

    2015-06-05

    A new metric, the Levelized Cost of Coating (LCOC), is derived in this paper to evaluate and compare alternative solar selective absorber coatings against a baseline coating (Pyromark 2500). In contrast to previous metrics that focused only on the optical performance of the coating, the LCOC includes costs, durability, and optical performance for more comprehensive comparisons among candidate materials. The LCOC is defined as the annualized marginal cost of the coating to produce a baseline annual thermal energy production. Costs include the cost of materials and labor for initial application and reapplication of the coating, as well as the cost of additional or fewer heliostats to yield the same annual thermal energy production as the baseline coating. Results show that important factors impacting the LCOC include the initial solar absorptance, thermal emittance, reapplication interval, degradation rate, reapplication cost, and downtime during reapplication. The LCOC can also be used to determine the optimal reapplication interval to minimize the levelized cost of energy production. As a result, similar methods can be applied more generally to determine the levelized cost of component for other applications and systems.

  4. Inorganic-organic solar cells based on quaternary sulfide as absorber materials.

    PubMed

    Hong, Tiantian; Liu, Zhifeng; Yan, Weiguo; Liu, Junqi; Zhang, Xueqi

    2015-12-14

    We report a novel promising quaternary sulfide (CuAgInS) to serve as a semiconductor sensitizer material in the photoelectrochemical field. In this study, CuAgInS (CAIS) sulfide sensitized ZnO nanorods were fabricated on ITO substrates through a facile and low-cost hydrothermal chemical method and applied on photoanodes for solar cells for the first time. The component and stoichiometry were key factors in determining the photoelectric performance of CAIS sulfide, which were controlled by modulating their reaction time. ZnO/Cu0.7Ag0.3InS2 nanoarrays exhibit an enhanced optical and photoelectric performance and the power conversion efficiency of ITO/ZnO/Cu0.7Ag0.3InS2/P3HT/Pt solid-state solar cell was up to 1.80%. The remarkable performance stems from improved electron transfer, a higher efficiency of light-harvesting and appropriate band gap alignment at the interface of the ZnO/Cu0.7Ag0.3InS2 NTs. The research indicates that CAIS as an absorbing material has enormous potential in solar cell systems.

  5. Rice straw-wood particle composite for sound absorbing wooden construction materials.

    PubMed

    Yang, Han-Seung; Kim, Dae-Jun; Kim, Hyun-Joong

    2003-01-01

    In this study, rice straw-wood particle composite boards were manufactured as insulation boards using the method used in the wood-based panel industry. The raw material, rice straw, was chosen because of its availability. The manufacturing parameters were: a specific gravity of 0.4, 0.6, and 0.8, and a rice straw content (10/90, 20/80, and 30/70 weight of rice straw/wood particle) of 10, 20, and 30 wt.%. A commercial urea-formaldehyde adhesive was used as the composite binder, to achieve 140-290 psi of bending modulus of rupture (MOR) with 0.4 specific gravity, 700-900 psi of bending MOR with 0.6 specific gravity, and 1400-2900 psi of bending MOR with a 0.8 specific gravity. All of the composite boards were superior to insulation board in strength. Width and length of the rice straw particle did not affect the bending MOR. The composite boards made from a random cutting of rice straw and wood particles were the best and recommended for manufacturing processes. Sound absorption coefficients of the 0.4 and 0.6 specific gravity boards were higher than the other wood-based materials. The recommended properties of the rice straw-wood particle composite boards are described, to absorb noises, preserve the temperature of indoor living spaces, and to be able to partially or completely substitute for wood particleboard and insulation board in wooden constructions.

  6. Coupling Hollow Fe3O4-Fe Nanoparticles with Graphene Sheets for High-Performance Electromagnetic Wave Absorbing Material.

    PubMed

    Qu, Bin; Zhu, Chunling; Li, Chunyan; Zhang, Xitian; Chen, Yujin

    2016-02-17

    We developed a strategy for coupling hollow Fe3O4-Fe nanoparticles with graphene sheets for high-performance electromagnetic wave absorbing material. The hollow Fe3O4-Fe nanoparticles with average diameter and shell thickness of 20 and 8 nm, respectively, were uniformly anchored on the graphene sheets without obvious aggregation. The minimal reflection loss RL values of the composite could reach -30 dB at the absorber thickness ranging from 2.0 to 5.0 mm, greatly superior to the solid Fe3O4-Fe/G composite and most magnetic EM wave absorbing materials recently reported. Moreover, the addition amount of the composite into paraffin matrix was only 18 wt %.

  7. Incorporation of Integral Fuel Burnable Absorbers Boron and Gadolinium into Zirconium-Alloy Fuel Clad Material

    SciTech Connect

    Sridharan, K.; Renk, T.J.; Lahoda, E.J.; Corradini, M.L

    2004-12-14

    Long-lived fuels require the use of higher enrichments of 235U or other fissile materials. Such high levels of fissile material lead to excessive fuel activity at the beginning of life. To counteract this excessive activity, integral fuel burnable absorbers (IFBA) are added to some rods in the fuel assembly. The two commonly used IFBA elements are gadolinium, which is added as gadolinium-oxide to the UO2 powder, and boron, which is applied as a zirconium-diboride coating on the UO2 pellets using plasma spraying or chemical vapor deposition techniques. The incorporation of IFBA into the fuel has to be performed in a nuclear-regulated facility that is physically separated from the main plant. These operations tend to be very costly because of their small volume and can add from 20 to 30% to the manufacturing cost of the fuel. Other manufacturing issues that impact cost and performance are maintaining the correct levels of dosing, the reduction in fuel melting point due to gadolinium-oxide additions, and parasitic neutron absorption at fuel's end-of-life. The goal of the proposed research is to develop an alternative approach that involves incorporation of boron or gadolinium into the outer surface of the fuel cladding material rather than as an additive to the fuel pellets. This paradigm shift will allow for the introduction of the IFBA in a non-nuclear regulated environment and will obviate the necessity of additional handling and processing of the fuel pellets. This could represent significant cost savings and potentially lead to greater reproducibility and control of the burnable fuel in the early stages of the reactor operation. The surface alloying is being performed using the IBEST (Ion Beam Surface Treatment) process developed at Sandia National Laboratories. IBEST involves the delivery of energetic ion beam pulses onto the surface of a material, near-surface melting, and rapid solidification. The non-equilibrium nature of such processing allows for surface

  8. Broad line region clouds and the absorbing material in NGC 4151

    NASA Technical Reports Server (NTRS)

    Ferland, G. J.; Mushotzky, R. F.

    1982-01-01

    A discussion is presented of the constraints imposed by X-ray, UV and optical observations on the absorbing material in the Seyfert 1.5 galaxy NGC 4151, comparing said observations with both photoionization model predictions of broad line region clouds and models of the narrow line region gas. The weakness of both semiforbidden C III 1909 and the broad component of H-alpha relative to C IV 1549, in conjunction with the absence of an absorption Balmer jump, indicate a broad line region ionization parameter that is greater in NGC 4151 than in QSO clouds by a factor of 30. The present calculations suggest that narrow line region clouds have a composition similar to extragalactic giant H II regions, with the H line spectrum showing that dust is mixed with narrow line region gas. It is hypothesized that broad line region clouds are likely to be in a radiatively driven wind, and it is shown that such clouds are opaque to radio emission.

  9. A Novel, Real-Valued Genetic Algorithm for Optimizing Radar Absorbing Materials

    NASA Technical Reports Server (NTRS)

    Hall, John Michael

    2004-01-01

    A novel, real-valued Genetic Algorithm (GA) was designed and implemented to minimize the reflectivity and/or transmissivity of an arbitrary number of homogeneous, lossy dielectric or magnetic layers of arbitrary thickness positioned at either the center of an infinitely long rectangular waveguide, or adjacent to the perfectly conducting backplate of a semi-infinite, shorted-out rectangular waveguide. Evolutionary processes extract the optimal physioelectric constants falling within specified constraints which minimize reflection and/or transmission over the frequency band of interest. This GA extracted the unphysical dielectric and magnetic constants of three layers of fictitious material placed adjacent to the conducting backplate of a shorted-out waveguide such that the reflectivity of the configuration was 55 dB or less over the entire X-band. Examples of the optimization of realistic multi-layer absorbers are also presented. Although typical Genetic Algorithms require populations of many thousands in order to function properly and obtain correct results, verified correct results were obtained for all test cases using this GA with a population of only four.

  10. Study of earth abundant tco and absorber materials for photovoltaic applications

    NASA Astrophysics Data System (ADS)

    Prabhakar, Tejas

    In order to make photovoltaic power generation a sustainable venture, it is necessary to use cost-effective materials in the manufacture of solar cells. In this regard, AZO (Aluminum doped Zinc Oxide) and CZTS (Copper Zinc Tin Sulfide) have been studied for their application in thin film solar cells. While AZO is a transparent conducting oxide, CZTS is a photovoltaic absorber. Both AZO and CZTS consist of earth abundant elements and are non-toxic in nature. Highly transparent and conductive AZO thin films were grown using RF sputtering. The influence of deposition parameters such as working pressure, RF power, substrate temperature and flow rate on the film characteristics was investigated. The as-grown films had a high degree of preferred orientation along the (002) direction which enhanced at lower working pressures, higher RF powers and lower substrate temperatures. Williamson-Hall analysis on the films revealed that as the working pressure was increased, the nature of stress and strain gradually changed from being compressive to tensile. The fall in optical transmission of the films was a consequence of free carrier absorption resulting from enhanced carrier density due to incorporation of Al atoms or oxygen vacancies. The optical and electrical properties of the films were described well by the Burstein-Moss effect. CZTS absorber layers were grown using ultrasonic spray pyrolysis at a deposition temperature of 350 C and subsequently annealed in a sulfurization furnace. Measurements from XRD and Raman spectra confirmed the presence of pure single phase Cu2ZnSnS4. Texture analysis of as-deposited and annealed CZTS films indicated that the (112) plane which is characteristic of the kesterite phase was preferred. The grain size increased from 50 nm to 100 nm on conducting post-deposition annealing. CZTS films with stoichiometric composition yielded a band gap of 1.5 eV, which is optimal for solar energy conversion. The variation of tin in the film changed its

  11. Hybrid Composite Response to Hydraulic Ram

    DTIC Science & Technology

    1986-10-20

    braided E-Glass 1/8-inch diameter, braided Additional materials Styrofoam 2 lb/ft3 , closed cell Self- vulcanizing rubber 1/8 thick 7 JTCG/AS-86-T-001...conducted under the Survivable Composite Structures program funded by the JTCG/AS Structures and Materials Subcommittee. Under this project, NWC (Naval...Weapons Center), China Lake, Calif. was tasked with developing struc- tural and material techniques for reducing hydraulic ram damage to composite aircraft

  12. [Simultaneous determination of migration amounts of antioxidants and ultraviolet absorbents by high performance liquid chromatography in food contact materials].

    PubMed

    Li, Chengfa; Li, Ying; Chen, Zhinan; Liang, Feng; Chen, Xuhui; Wu, Shaojing; Li, Yongtao; Sun, Xiaoying

    2014-06-01

    An efficient analytical method for the quantitative determination of migration levels of antioxidants and ultraviolet absorbents in food contact materials by high performance liquid chromatography (HPLC) has been developed. The analytical method showed good linearity with the correlation coefficients (r2) > or = 0.999 8 for all the compounds. The limits of detection were between 0.01 mg/L and 0.22 mg/L and the limits of quantification were in the range of 0.03 to 0.85 mg/L for the 23 analytes. According to the European Union Directive No 10/2011, five food simulants were investigated: 30 g/L acetic acid, 10% (v/v) ethanol, 20% (v/v) ethanol, 50% (v/v) ethanol, and fatty food simulant (isooctane). The recoveries were in the range of 92.8%-117.7%, with the relative standard deviations of 0.95%-9.72%. The effects of different experimental conditions on the recoveries of antioxidants and UV absorbents were studied. The results showed that the method is accurate and stable, and can meet the requirements of European Commission Regulation (EU) No 10/2011 and GB 9685-2008 for the specific migration limits (SML) of the antioxidants and ultraviolet absorbents in real food contact plastic materials and article samples. The method has been applied to determine the migration levels of antioxidants and ultraviolet absorbents in different simulants from the migration tests of 30 batches of food contact material samples.

  13. Analysis of the effect of different absorber materials and loading on the shielding effectiveness of a metallic enclosure

    NASA Astrophysics Data System (ADS)

    Parr, S.; Karcoon, H.; Dickmann, S.; Rambousky, R.

    2015-11-01

    Metallic rooms as part of a complex system, like a ship, are necessarily connected electromagnetically via apertures and cables to the outside. Therefore, their electromagnetic shielding effectiveness (SE) is limited by ventilation openings, cable feed-throughs and door gaps. Thus, electronic equipment inside these rooms is susceptible to outer electromagnetic threats like IEM (Intentional Electromagnetic Interference). Dielectric or magnetic absorber inside such a screened room can be used in order to prevent the SE from collapsing at the resonant frequencies. In this contribution, the effect of different available absorber materials is compared, as well as other properties like weight and workability. Furthermore, parameter variations of the absorber as well as the effect of loading in form of metallic and dielectric structures on the SE are analyzed.

  14. Evaluation of Aluminum-Boron Carbide Neutron Absorbing Materials for Interim Storage of Used Nuclear Fuel

    SciTech Connect

    Wang, Lumin; Wierschke, Jonathan Brett

    2015-04-08

    The objective of this work was to understand the corrosion behavior of Boral® and Bortec® neutron absorbers over long-term deployment in a used nuclear fuel dry cask storage environment. Corrosion effects were accelerated by flowing humidified argon through an autoclave at temperatures up to 570°C. Test results show little corrosion of the aluminum matrix but that boron is leaching out of the samples. Initial tests performed at 400 and 570°C were hampered by reduced flow caused by the rapid build-up of solid deposits in the outlet lines. Analysis of the deposits by XRD shows that the deposits are comprised of boron trioxide and sassolite (H3BO3). The collection of boron- containing compounds in the outlet lines indicated that boron was being released from the samples. Observation of the exposed samples using SEM and optical microscopy show the growth of new phases in the samples. These phases were most prominent in Bortec® samples exposed at 570°C. Samples of Boral® exposed at 570°C showed minimal new phase formation but showed nearly the complete loss of boron carbide particles. Boron carbide loss was also significant in Boral samples at 400°C. However, at 400°C phases similar to those found in Bortec® were observed. The rapid loss of the boron carbide particles in the Boral® is suspected to inhibit the formation of the new secondary phases. However, Material samples in an actual dry cask environment would be exposed to temperatures closer to 300°C and less water than the lowest test. The results from this study conclude that at the temperature and humidity levels present in a dry cask environment, corrosion and boron leaching will have no effect on the performance of Boral® and Bortec® to maintain criticality control.

  15. Development of FeCoB/Graphene Oxide based microwave absorbing materials for X-Band region

    NASA Astrophysics Data System (ADS)

    Das, Sukanta; Chandra Nayak, Ganesh; Sahu, S. K.; Oraon, Ramesh

    2015-06-01

    This work explored the microwave absorption capability of Graphene Oxide and Graphene Oxide coated with FeCoB for stealth technology. Epoxy based microwave absorbing materials were prepared with 30% loading of Graphene Oxide, FeCoB alloy and Graphene Oxide coated with FeCoB. Graphene Oxide and FeCoB were synthesized by Hummer's and Co-precipitation methods, respectively. The filler particles were characterized by FESEM, XRD and Vibrating Sample Magnetometer techniques. Permittivity, permeability and reflection loss values of the composite absorbers were measured with vector network analyzer which showed a reflection loss value of -7.86 dB, at 10.72 GHz, for single layered Graphene Oxide/Epoxy based microwave absorbers which can be correlated to the absorption of about 83.97% of the incident microwave energy. Reflection loss value of FeCoB/Epoxy based microwave absorber showed -13.30 dB at 11.67 GHz, which corresponded to maximum absorption of 93.8%. However, reflection loss values of Graphene Oxide coated with FeCoB/Epoxy based single-layer absorber increased to -22.24 dB at 12.4 GHz which corresponds to an absorption of 99% of the incident microwave energy.

  16. On the physical and geometrical properties responsible for the highly absorbing nature of black materials in the infrared

    NASA Astrophysics Data System (ADS)

    Meier, Steven Robert

    Black surfaces are of paramount importance in the design of terrestrial and space-borne optical systems. Optical designers can choose from a variety of black materials to suppress reflected and scattered stray light. Among these applications are the suppression of unwanted reflection or scattering of light in optical systems, solar collectors, blackbody absorbers, thermal insulators, telescope housing and baffles where stray light reduction is vital, and cold stops and light shields for infrared detectors. The physical mechanisms responsible for understanding the highly absorbing nature of black materials in the infrared spectral region are investigated in this dissertation. We present experimental data on the optical, surface, and constituent properties of black materials. In addition, we developed unique optical instrumentation to characterize the hemispherical reflectance and scattering properties of these materials as a function of incident angle and state of polarization. We compared the experimental data to theoretical rough surface scattering models to understand the absorption mechanisms of these black materials and found good agreement. Furthermore, results from a new, highly absorbing black material in the infrared wavelength regime, known as carbon aerogels, are presented and shown to be superior or equivalent to existing black materials used by optical designers. In addition, we presented a new cylindrical-spherical cavity enclosure and calculated the apparent emissivity along the bounding surfaces of this new cavity enclosure. To our knowledge, this was the first calculation of the apparent emissivity for a cavity enclosure with obscuration. Finally, we proposed several improvements for each individual black material in order to achieve even higher absorption levels.

  17. Remotely Accessible Management System (RAMS).

    ERIC Educational Resources Information Center

    Wood, Rex

    Oakland Schools, an Intermediate School District for Administration, operates a Remotely Accessible Management System (RAMS). RAMS is composed of over 100 computer programs, each of which performs procedures on the files of the 28 local school districts comprising the constituency of Oakland Schools. This regional service agency covers 900 square…

  18. A Two-Step Absorber Deposition Approach To Overcome Shunt Losses in Thin-Film Solar Cells: Using Tin Sulfide as a Proof-of-Concept Material System

    SciTech Connect

    Steinmann, Vera; Chakraborty, Rupak; Rekemeyer, Paul H.; Hartman, Katy; Brandt, Riley E.; Polizzotti, Alex; Yang, Chuanxi; Moriarty, Tom; Gradečak, Silvija; Gordon, Roy G.; Buonassisi, Tonio

    2016-08-31

    As novel absorber materials are developed and screened for their photovoltaic (PV) properties, the challenge remains to reproducibly test promising candidates for high-performing PV devices. Many early-stage devices are prone to device shunting due to pinholes in the absorber layer, producing 'false-negative' results. Here, we demonstrate a device engineering solution toward a robust device architecture, using a two-step absorber deposition approach. We use tin sulfide (SnS) as a test absorber material. The SnS bulk is processed at high temperature (400 degrees C) to stimulate grain growth, followed by a much thinner, low-temperature (200 degrees C) absorber deposition. At a lower process temperature, the thin absorber overlayer contains significantly smaller, densely packed grains, which are likely to provide a continuous coating and fill pinholes in the underlying absorber bulk. We compare this two-step approach to the more standard approach of using a semi-insulating buffer layer directly on top of the annealed absorber bulk, and we demonstrate a more than 3.5x superior shunt resistance Rsh with smaller standard error ..sigma..Rsh. Electron-beam-induced current (EBIC) measurements indicate a lower density of pinholes in the SnS absorber bulk when using the two-step absorber deposition approach. We correlate those findings to improvements in the device performance and device performance reproducibility.

  19. Electromagnetic property of SiO2-coated carbonyl iron/polyimide composites as heat resistant microwave absorbing materials

    NASA Astrophysics Data System (ADS)

    Wang, Hongyu; Zhu, Dongmei; Zhou, Wancheng; Luo, Fa

    2015-02-01

    Heat resistant microwave absorbing materials were prepared by compression molding method, using polyimide resin as matrix and SiO2 coated carbonyl iron (CI) as filler. The SiO2 coated CI particles were prepared by Stober process. The microwave absorbing properties and the effect of heat treatment on the electromagnetic properties of SiO2 coated CI/polyimide composites were investigated. When the content of SiO2 coated CI is 60 wt%, the value of minimum reflection loss decreases from -25 dB to -33 dB with the thickness increases from 1.5 mm to 2.1 mm. According to the thermal-gravimetric analyses (TGA) curves, the polyimide matrix can be used at 300 °C for long time. The complex permittivity of the composites slightly increases while the complex permeability almost keeps constant after heat treatment at 300 °C for 10 h, which indicating that the composites can be used at elevated temperature as microwave absorbing materials at the same time have good heat resistance and microwave absorption.

  20. Microstructural Characterization of Burnable Absorber Materials Being Evaluated for Application in LEU U-Mo Fuel Plates

    SciTech Connect

    J. F. Jue; B. Miller; B. Yao; E. Perez; Y. H. Sohn

    2011-03-01

    The starting microstructure of a fuel plate will impact how it performs during irradiation. As a result, microstructural characterization has been performed on as-fabricated monolithic fuel plates to determine the changes in fuel plate microstructure that may result from changes in fabrication parameters. Particular focus has been given to the fuel plate U-10Mo/Zr and Zr/AA6061 cladding interfaces, since the integrity of these interfaces will play a big role in determining the overall performance of the fuel plate during irradiation. In addition, burnable absorber materials for potential incorporation into monolithic fuel plates have been characterized to identify their as-fabricated microstructures. This information will be important when trying to understand the PIE data from fuel plates with burnable absorbers that are irradiated in future irradiation experiments. This paper will focus on the microstructures observed using optical metallography, X-ray diffraction, and scanning and transmission electron microscopy for monolithic fuel plates exposed to different fabrication parameters and for as-fabricated burnable absorber materials.

  1. Development of High Band Gap Absorber and Buffer Materials for Thin Film Solar Cell Applications

    NASA Astrophysics Data System (ADS)

    Dwyer, Dan

    2011-12-01

    CuInGaSe2 (CIGS) device efficiencies are the highest of the thin film absorber materials (vs. CdTe, alpha-Si, CuInSe2). However, the band gap of the highest efficiency CIGS cells deviates from the expected ideal value predicted by models [1]. Widening the band gap to the theoretically ideal value is one way to increase cell efficiencies. Widening the band gap can be accomplished in two ways; by finding a solution to the Ga-related defects which limit the open circuit voltage at high Ga ratios, or by utilizing different elemental combinations to form an alternative high band gap photoactive Cu-chalcopyrite (which includes any combination of the cations Cu, Al, Ga, and In along with the anions S, Se, and Te). This thesis focuses on the second option, substituting aluminum for gallium in the chalcopyrite lattice to form a CuInAlSe2 (CIAS) film using a sputtering and selenization approach. Both sequential and co-sputtering of metal precursors is performed. Indium was found to be very mobile during both sputtering processes, with a tendency to diffuse to the film surface even when deposited as the base layer in a sequential sputtering process. Elemental diffusion was controlled to a degree using thicker Cu top layer in co-sputtering. The greater thermal conductivity of stainless steel foil (16 W/mK) vs. glass (0.9-1.3 W/mK) can also be used to limit indium diffusion, by keeping the substrate cooler during sputtering. In both sputtering methods aluminum is deposited oxygen-free by capping the film with a Cu capping layer in combination with controlling the indium diffusion. Selenization of metal precursor films is completed using two different techniques. The first is a thermal evaporation approach from a heated box source (method 1 -- reactive thermal evaporation (RTE-Se)). The second is batch selenization using a heated tube furnace (method 2 -- batch selenization). Some batch selenized precursors were capped with ˜ 1mum of selenium. In both selenization methods

  2. Composition for absorbing hydrogen

    DOEpatents

    Heung, Leung K.; Wicks, George G.; Enz, Glenn L.

    1995-01-01

    A hydrogen absorbing composition. The composition comprises a porous glass matrix, made by a sol-gel process, having a hydrogen-absorbing material dispersed throughout the matrix. A sol, made from tetraethyl orthosilicate, is mixed with a hydrogen-absorbing material and solidified to form a porous glass matrix with the hydrogen-absorbing material dispersed uniformly throughout the matrix. The glass matrix has pores large enough to allow gases having hydrogen to pass through the matrix, yet small enough to hold the particles dispersed within the matrix so that the hydrogen-absorbing particles are not released during repeated hydrogen absorption/desorption cycles.

  3. Composition for absorbing hydrogen

    DOEpatents

    Heung, L.K.; Wicks, G.G.; Enz, G.L.

    1995-05-02

    A hydrogen absorbing composition is described. The composition comprises a porous glass matrix, made by a sol-gel process, having a hydrogen-absorbing material dispersed throughout the matrix. A sol, made from tetraethyl orthosilicate, is mixed with a hydrogen-absorbing material and solidified to form a porous glass matrix with the hydrogen-absorbing material dispersed uniformly throughout the matrix. The glass matrix has pores large enough to allow gases having hydrogen to pass through the matrix, yet small enough to hold the particles dispersed within the matrix so that the hydrogen-absorbing particles are not released during repeated hydrogen absorption/desorption cycles.

  4. High Terahertz Absorbing Nanoscale Metal Films for Fabrication of Micromechanical Bi-material THz Sensors

    DTIC Science & Technology

    2010-06-01

    the vacuum cell , when the THz source is off. After the THz illumination, through the lens and the wrapped object, the respective pixels which absorb...placed into the vacuum cell , when the THz source is off. After the THz illumination, through the lens and the wrapped object, the respective pixels...Refraction Index of Silicon Oxide layer % n4=2.05; n5=1.46; n6=2.05; n7=1.46; n8=2.05; n9 =1.46; n10=2.05; n11=1.46; n12=(1-i

  5. Two-photon or higher-order absorbing optical materials and methods of use

    NASA Technical Reports Server (NTRS)

    Marder, Seth (Inventor); Perry, Joseph (Inventor)

    2001-01-01

    Compositions capable of simultaneous two-photon absorption and higher order absorptivities are disclosed. Many of these compositions are compounds satisfying the formulae D-.PI.-D, A-.PI.-A, D-A-D and A-D-A, wherein D is an electron donor group, A is an electron acceptor group and .PI. comprises a bridge of .pi.-conjugated bonds connecting the electron donor groups and electron acceptor groups. In A-D-A and D-A-D compounds, the .pi. bridge is substituted with electron donor groups and electron acceptor groups, respectively. Also disclosed are methods that generate an electronically excited state of a compound, including those satisfying one of these formulae. The electronically excited state is achieved in a method that includes irradiating the compound with light. Then, the compound is converted to a multi-photon electronically excited state upon simultaneous absorption of at least two photons of light. The sum of the energies of all of the absorbed photons is greater than or equal to the transition energy from a ground state of the compound to the multi-photon excited state. The energy of each absorbed photon is less than the transition energy between the ground state and the lowest single-photon excited state of the compound is less than the transition energy between the multi-photon excited state and the ground state.

  6. Quantitation of absorbed or deposited materials on a substrate that measures energy deposition

    DOEpatents

    Grant, Patrick G.; Bakajin, Olgica; Vogel, John S.; Bench, Graham

    2005-01-18

    This invention provides a system and method for measuring an energy differential that correlates to quantitative measurement of an amount mass of an applied localized material. Such a system and method remains compatible with other methods of analysis, such as, for example, quantitating the elemental or isotopic content, identifying the material, or using the material in biochemical analysis.

  7. Spacecraft ram glow and surface temperature

    NASA Technical Reports Server (NTRS)

    Swenson, G. R.; Mende, S. B.; Llewellyn, E. J.

    1987-01-01

    Space shuttle glow intensity measurements show large differences when the data from different missions are compared. In particular, on the 41-G mission the space shuttle ram glow was observed to display an unusually low intensity. Subsequent investigation of this measurement and earlier measurements suggest that there was a significant difference in temperature of the glow producing ram surfaces. The highly insulating properties coupled with the high emissivity of the shuttle tile results in surfaces that cool quickly when exposed to deep space on the night side of the orbit. The increased glow intensity is consistent with the hypothesis that the glow is emitted from excited NO2. The excited NO2 is likely formed through three body recombination (OI + NO + M = NO2*) where ramming of OI interacts with weakly surface bound NO. The NO is formed from atmospheric OI and NI which is scavenged by the spacecraft moving through the atmosphere. It is postulated that the colder surfaces retain a thicker layer of NO thereby increasing the probability of the reaction. It has been found from the glow intensity/temperature data that the bond energy of the surface bound precursor, leading to the chemical recombination producing the glow, is approximately 0.14 eV. A thermal analysis of material samples of STS-8 was made and the postulated temperature change of individual material samples prior to the time of glow measurements above respective samples are consistent with the thermal effect on glow found for the orbiter surface.

  8. SeaRAM: an evaluation of the safety of RAM transport by sea

    SciTech Connect

    McConnell, P.; Sorenson, K.B.; Carter, M.H.; Keane, M.P.; Keith, V.F.; Heid, R.J.

    1995-12-31

    SeaRAM is a multi-year Department of Energy (DOE) project designed to validate the safety of shipping radioactive materials (RAM) by sea. The project has an ultimate goal of developing and demonstrating analytic tools for performing comprehensive analyses to evaluate the risks to humans and the environment due to sea transport of plutonium, vitrified high-level waste (VHLW), and spent fuel associated with reprocessing and research reactors. To achieve this end, evaluations of maritime databases and structural an thermal analyses of particular severe collision and fire accidents have been and will continue to be conducted. Program management for SeaRAM is based at the DOE`s Office of Environmental Restoration. Technical activities for the project are being conducted at Sandia National Laboratories (SNL). Several private organizations are also involved in providing technical support, notably Engineering Computer Optecnomics, Inc. (ECO). The technical work performed for SeaRAM also supports DOE participation in an International Atomic Energy Agency (IAEA) Cooperative Research Program (CRP) entitled Accident Severity at Sea During Transport of Radioactive Material. This paper discusses activities performed during the first year of the project.

  9. Sexual activity patterns in rams.

    PubMed Central

    Bernon, D E; Shrestha, J N

    1984-01-01

    Behaviour was measured in reproductively experienced rams from three crossbred strains and two pure breeds (Suffolk and Finnish Landrace) in an attempt to develop a method for rapid screening of sexually aggressive rams and to measure breed differences in sexual activity. A set sequential pattern of activity need not occur in sexually experienced rams, and components of their sexual behaviour may be influenced by the estrual status of the ewe. The data indicate that the number of attempted mounts is an acceptable selection tool, with a mount following a short period of investigation most likely to be followed by coitus. Two sequential ten minute periods are sufficient for rapid screening of rams for short-term sexual activity levels. PMID:6713255

  10. Absorbents as packing materials in on-line coupling of reversed phase liquid chromatography and gas chromatography via a programmed temperature vaporizer.

    PubMed

    Flores, Gema; Ruiz Del Castillo, Maria Luisa; Herraiz, Marta

    2007-06-15

    A method based on the use of absorbents as packing materials in the interface of the direct coupling between reversed phase liquid chromatography and gas chromatography (RPLC-GC) is proposed. To that end, a comparative study on different adsorbents and absorbents was carried out. Specifically, Tenax TA and Gaschrom were used as adsorbents while polydimethylsiloxane and poly(50% phenyl:50% methylsiloxane) were the absorbents tested. Some experimental variables involved in the solvent elimination were separately optimised for adsorbent and absorbent materials. Relative standard deviations (RSD) lower than 10% were achieved in all cases but the use of absorbents showed interesting advantages with respect to adsorbents, namely a simpler performance of the experimental work, which facilitates the sample preparation step and the subsequent gas chromatographic analysis to be performed.

  11. Two-photon or higher-order absorbing optical materials for generation of reactive species

    NASA Technical Reports Server (NTRS)

    Cumpston, Brian (Inventor); Lipson, Matthew (Inventor); Marder, Seth R (Inventor); Perry, Joseph W (Inventor)

    2007-01-01

    Disclosed are highly efficient multiphoton absorbing compounds and methods of their use. The compounds generally include a bridge of pi-conjugated bonds connecting electron donating groups or electron accepting groups. The bridge may be substituted with a variety of substituents as well. Solubility, lipophilicity, absorption maxima and other characteristics of the compounds may be tailored by changing the electron donating groups or electron accepting groups, the substituents attached to or the length of the pi-conjugated bridge. Numerous photophysical and photochemical methods are enabled by converting these compounds to electronically excited states upon simultaneous absorption of at least two photons of radiation. The compounds have large two-photon or higher-order absorptivities such that upon absorption, one or more Lewis acidic species, Lewis basic species, radical species or ionic species are formed.

  12. Two-Photon or Higher-Order Absorbing Optical Materials for Generation of Reactive Species

    NASA Technical Reports Server (NTRS)

    Cumpston, Brian (Inventor); Lipson, Matthew (Inventor); Marder, Seth R. (Inventor); Perry, Joseph W. (Inventor)

    2013-01-01

    Disclosed are highly efficient multiphoton absorbing compounds and methods of their use. The compounds generally include a bridge of pi-conjugated bonds connecting electron donating groups or electron accepting groups. The bridge may be substituted with a variety of substituents as well. Solubility, lipophilicity, absorption maxima and other characteristics of the compounds may be tailored by changing the electron donating groups or electron accepting groups, the substituents attached to or the length of the pi-conjugated bridge. Numerous photophysical and photochemical methods are enabled by converting these compounds to electronically excited states upon simultaneous absorption of at least two photons of radiation. The compounds have large two-photon or higher-order absorptivities such that upon absorption, one or more Lewis acidic species, Lewis basic species, radical species or ionic species are formed.

  13. Two-photon or higher-order absorbing optical materials for generation of reactive species

    NASA Technical Reports Server (NTRS)

    Cumpston, Brian (Inventor); Lipson, Matthew (Inventor); Marder, Seth R. (Inventor); Perry, Joseph W. (Inventor)

    2003-01-01

    Disclosed are highly efficient multiphoton absorbing compounds and methods of their use. The compounds generally include a bridge of pi-conjugated bonds connecting electron donating groups or electron accepting groups. The bridge may be substituted with a variety of substituents as well. Solubility, lipophilicity, absorption maxima and other characteristics of the compounds may be tailored by changing the electron donating groups or electron accepting groups, the substituents attached to or the length of the pi-conjugated bridge. Numerous photophysical and photochemical methods are enabled by converting these compounds to electronically excited states upon simultaneous absorption of at least two photons of radiation. The compounds have large two-photon or higher-order absorptivities such that upon absorption, one or more Lewis acidic species, Lewis basic species, radical species or ionic species are formed.

  14. Remote Attitude Measurement Sensor (RAMS)

    NASA Technical Reports Server (NTRS)

    Davis, H. W.

    1989-01-01

    Remote attitude measurement sensor (RAMS) offers a low-cost, low-risk, proven design concept that is based on mature, demonstrated space sensor technology. The electronic design concepts and interpolation algorithms were tested and proven in space hardware like th Retroreflector Field Tracker and various star trackers. The RAMS concept is versatile and has broad applicability to both ground testing and spacecraft needs. It is ideal for use as a precision laboratory sensor for structural dynamics testing. It requires very little set-up or preparation time and the output data is immediately usable without integration or extensive analysis efforts. For on-orbit use, RAMS rivals any other type of dynamic structural sensor (accelerometer, lidar, photogrammetric techniques, etc.) for overall performance, reliability, suitability, and cost. Widespread acceptance and extensive usage of RAMS will occur only after some interested agency, such as OAST, adopts the RAMS concept and provides the funding support necessary for further development and implementation of RAMS for a specific program.

  15. [The potential of tone audiometry for the determination of the sound-absorbing properties of various materials].

    PubMed

    Zinkin, V N; Sheshegov, P M

    2014-01-01

    The objective of the present work was to experimentally estimate the potential of the tone audiometry technique for the determination of the sound-absorbing properties of various material. The study included 15 subjects at the age from 19 to 32 years. Their audiological examination was followed by the placement of the 5×7 cm spacer plate from the study material beneath the bone vibrator telephone to determine the bone sound-conduction threshold; no air-marking was undertaken. The sound absorption by the study materials of interest was determined in each octave-band from 250 to 8000 Hz from the difference between the starting audiogram and the audiogram of the material of interest. The study was carried out in three stages: (1) evaluation of sound absorption of each of the five materials, (2) measurement of the same parameter in the combinations of 2--4 layers for increasing sound absorption, and (3) fixation of the bone conduction telephone by the operator's hand (the head-mounted harness was used for the same purpose at stages 1 and 2). The experiments demonstrated that the study of bone sound conduction by means of tone audiometry allows to estimate the sound absorption of various materials. This technique may be applied for the development of a subjective method for the measurement of sound absorption in order to evaluate the acoustic effectiveness of materials that can be used to construct individual protective anti-noise devices.

  16. Corrosion resistant neutron absorbing coatings

    DOEpatents

    Choi, Jor-Shan [El Cerrito, CA; Farmer, Joseph C [Tracy, CA; Lee, Chuck K [Hayward, CA; Walker, Jeffrey [Gaithersburg, MD; Russell, Paige [Las Vegas, NV; Kirkwood, Jon [Saint Leonard, MD; Yang, Nancy [Lafayette, CA; Champagne, Victor [Oxford, PA

    2012-05-29

    A method of forming a corrosion resistant neutron absorbing coating comprising the steps of spray or deposition or sputtering or welding processing to form a composite material made of a spray or deposition or sputtering or welding material, and a neutron absorbing material. Also a corrosion resistant neutron absorbing coating comprising a composite material made of a spray or deposition or sputtering or welding material, and a neutron absorbing material.

  17. Corrosion resistant neutron absorbing coatings

    DOEpatents

    Choi, Jor-Shan; Farmer, Joseph C; Lee, Chuck K; Walker, Jeffrey; Russell, Paige; Kirkwood, Jon; Yang, Nancy; Champagne, Victor

    2013-11-12

    A method of forming a corrosion resistant neutron absorbing coating comprising the steps of spray or deposition or sputtering or welding processing to form a composite material made of a spray or deposition or sputtering or welding material, and a neutron absorbing material. Also a corrosion resistant neutron absorbing coating comprising a composite material made of a spray or deposition or sputtering or welding material, and a neutron absorbing material.

  18. Measurement and Simulation of Thermal Conductivity of Hafnium-Aluminum Thermal Neutron Absorber Material

    NASA Astrophysics Data System (ADS)

    Guillen, Donna Post; Harris, William H.

    2016-09-01

    A metal matrix composite (MMC) material composed of hafnium aluminide (Al3Hf) intermetallic particles in an aluminum matrix has been identified as a promising material for fast flux irradiation testing applications. This material can filter thermal neutrons while simultaneously providing high rates of conductive cooling for experiment capsules. The purpose of this work is to investigate effects of Hf-Al material composition and neutron irradiation on thermophysical properties, which were measured before and after irradiation. When performing differential scanning calorimetry (DSC) on the irradiated specimens, a large exotherm corresponding to material annealment was observed. Therefore, a test procedure was developed to perform DSC and laser flash analysis (LFA) to obtain the specific heat and thermal diffusivity of pre- and post-annealment specimens. This paper presents the thermal properties for three states of the MMC material: (1) unirradiated, (2) as-irradiated, and (3) irradiated and annealed. Microstructure-property relationships were obtained for the thermal conductivity. These relationships are useful for designing components from this material to operate in irradiation environments. The ability of this material to effectively conduct heat as a function of temperature, volume fraction Al3Hf, radiation damage, and annealing is assessed using the MOOSE suite of computational tools.

  19. Plasmonic materials based on ZnO films and their potential for developing broadband middle-infrared absorbers

    SciTech Connect

    Kesim, Yunus E. Battal, Enes; Okyay, Ali K.

    2014-07-15

    Noble metals such as gold and silver have been extensively used for plasmonic applications due to their ability to support plasmons, yet they suffer from high intrinsic losses. Alternative plasmonic materials that offer low loss and tunability are desired for a new generation of efficient and agile devices. In this paper, atomic layer deposition (ALD) grown ZnO is investigated as a candidate material for plasmonic applications. Optical constants of ZnO are investigated along with figures of merit pertaining to plasmonic waveguides. We show that ZnO can alleviate the trade-off between propagation length and mode confinement width owing to tunable dielectric properties. In order to demonstrate plasmonic resonances, we simulate a grating structure and computationally demonstrate an ultra-wide-band (4–15 μm) infrared absorber.

  20. Optimisation of the electromagnetic matching of manganese dioxide/multi-wall carbon nanotube composites as dielectric microwave-absorbing materials

    NASA Astrophysics Data System (ADS)

    Ting, Tzu-Hao; Chiang, Chih-Chia; Lin, Po-Chuan; Lin, Chia-Huei

    2013-08-01

    An optimised composite sample was prepared using two dielectric materials manganese dioxide (MnO2) and multi-wall carbon nanotubes (MWNTs) in an epoxy-resin matrix. Structural characterisations of both the synthesised manganese dioxide (MnO2) and the multi-wall carbon nanotubes (MWNTs) were performed by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The microwave absorption properties of dielectric composites with different weight fractions of MnO2 were investigated by measuring the complex permittivity, the complex permeability and the reflection loss in the 2-18 and 18-40 GHz microwave frequency ranges using the free space method. The complex permittivity varied with the MnO2 content, and the results show that a high concentration of fillers increased the dielectric constant. Therefore, the appropriate combination of components and experimental conditions can produce materials with specific characteristic for use as wide-band microwave absorbers.

  1. 3D-Printing ‘Smarter’ Energy Absorbing Materials

    ScienceCinema

    Duoss, Eric

    2016-07-12

    Foams are, by nature, disordered materials studded with air pockets of varying sizes. Lack of control over the material’s architecture at the micrometer or nanometer scale can make it difficult to adjust the foam’s basic properties. But Eric Duoss and a team of Livermore researchers are using additive manufacturing to develop “smarter” silicone cushions. By architecting the structure at the micro scale, they are able to control macro-scale properties previously unachievable with foam materials.

  2. Hydrogen Absorbing Materials for Use as Radiation Shielding During Extended Space Flight Missions

    NASA Technical Reports Server (NTRS)

    Grugel, Richard N.; Rose, M. Franklin (Technical Monitor)

    2001-01-01

    Minimizing radiation exposure from the galactic cosmic ray (GCR) environment during extended space missions is particularly crucial to crew health and safety. Here, an ideal candidate for shielding would be pure solid or liquid hydrogen, a material that effectively fragments heavy ions into ones of lower mass and energy that are more easily attenuated. Unfortunately, utilizing pure hydrogen is not presently feasible. It is, however, known that the hydrogen content of other materials (for example, metal hydrides, palladium alloys, and organic compounds) can exceed that of pure solid hydrogen and thus merit consideration as shielding candidates. This presentation will discuss an ongoing effort to develop novel shielding from such materials in concert with a coordinated testing/evaluation and modeling effort.

  3. Characterization of porous glass-ceramic material as absorber of electromagnetic radiation

    NASA Astrophysics Data System (ADS)

    Kazmina, O.; Suslyaev, V.; Dushkina, M.; Semukhin, B.

    2015-04-01

    Investigations of a foam glass-ceramic material synthesized from raw siliceous earth material by the two-stage method at temperatures below 950°C have demonstrated the improvement of its physic mechanical properties in comparison with foam glass synthesized from glass cullet. This material actively interacts with microwaves and can be used for the development of protective screens reducing the adverse effect of microwaves on biological objects, anechoic chambers, and rooms with low level of electromagnetic background noise. Spectra of the transmission and absorption coefficients and of the complex dielectric permittivity for frequencies in the range 26-260 GHz are presented. The observed effects demonstrate the existence of regions with partial and total reflection arising on the glass-pore boundary and of the microwave interaction with ultradisperse carbon particles that remain after foaming with incomplete frothier transition from the soot to the gas phase.

  4. Electromagnetic power absorber

    NASA Technical Reports Server (NTRS)

    Iwasaki, R. S. (Inventor)

    1979-01-01

    A structure is presented with a surface portion of dielectric material which passes electromagnetic radiation and with a portion below the surface which includes material that absorbs the radiation, the face of the structure being formed with numerous steep ridges. The steepness of the dielectric material results in a high proportion of the electromagnetic energy passing through the surface for absorption by the absorbing material under the surface. A backing of aluminum or other highly heat-conductive and reflective material lies under the face and has very steep protuberances supporting the absorbing and dielectric materials.

  5. Determination of refractive index and absorbance modulation amplitudes from angular selectivity of holograms in polymer material with phenanthrenequinone

    NASA Astrophysics Data System (ADS)

    Borisov, Vladimir; Veniaminov, Andrey

    2015-10-01

    Amplitude and phase contributions to mixed volume holographic gratings were extracted from measured contours of angular selectivity. Holograms for the investigation were recorded in the glassy polymer material with phenan-threnequinone (PQ) using the DPSS CW laser (532 nm) and then self-developed due to molecular diffusion of PQ, reaching diffraction efficiency about 40%. Refractive index and absorbance modulation amplitudes of those holograms were obtained as adjustable parameters from theoretical equations by fitting angular dependencies of zeros and 1st orders diffraction efficiency measured at 450, 473, 532, and 633 nm at the different stages of hologram development. Mixed gratings manifest themselves in asymmetrical transmittance selectivity contours with one minimum and one maximum shifted with respect to the Bragg angle, while symmetrical contours with a minimum or a maximum at the Bragg angle are characteristic of pure phase and amplitude gratings, respectively. In the course of a hologram development, it converts from a predominantly amplitude-mixed to almost purely phase one in the case of readout using a light within the absorption band of PQ and maintains the phase nature besides it. The value of refractive index amplitude is ranging from 5×10-6 to 10-4 and the value of absorbance amplitude is up to 140 m-1.

  6. Antimicrobial Formulations of Absorbable Bone Substitute Materials as Drug Carriers Based on Calcium Sulfate

    PubMed Central

    Obermeier, A.; Kiokekli, M.; Büchner, H.; Vogt, S.; Stemberger, A.; Burgkart, R.; Lucke, M.

    2016-01-01

    Substitution of bones is a well-established, necessary procedure to treat bone defects in trauma and orthopedic surgeries. For prevention or treatment of perioperative infection, the implantation of resorbable bone substitute materials carrying antibiotics is a necessary treatment. In this study, we investigated the newly formulated calcium-based resorbable bone substitute materials containing either gentamicin (CaSO4-G [Herafill-G]), vancomycin (CaSO4-V), or tobramycin (Osteoset). We characterized the released antibiotic concentration per unit. Bone substitute materials were implanted in bones of rabbits via a standardized surgical procedure. Clinical parameters and levels of the antibiotic-releasing materials in serum were determined. Local concentrations of antibiotics were measured using antimicrobial tests of bone tissue. Aminoglycoside release kinetics in vitro per square millimeter of bead surface showed the most prolonged release for gentamicin, followed by vancomycin and, with the fastest release, tobramycin. In vivo level in serum detected over 28 days was highest for gentamicin at 0.42 μg/ml, followed by vancomycin at 0.11 μg/ml and tobramycin at 0.04 μg/ml. The clinical parameters indicated high biocompatibility for materials used. None of the rabbits subjected to the procedure showed any adverse reaction. The highest availability of antibiotics at 14.8 μg/g on day 1 in the cortical tibia ex vivo was demonstrated for gentamicin, decreasing within 14 days. In the medulla, vancomycin showed a high level at 444 μg/g on day 1, decreasing continuously over 14 days, whereas gentamicin decreased faster within the initial 3 days. The compared antibiotic formulations varied significantly in release kinetics in serum as well as locally in medulla and cortex. PMID:27067337

  7. 10B areal density: A novel approach for design and fabrication of B4C/6061Al neutron absorbing materials

    NASA Astrophysics Data System (ADS)

    Li, Yuli; Wang, Wenxian; Zhou, Jun; Chen, Hongsheng; Zhang, Peng

    2017-04-01

    In this paper, a novel approach to evaluate the neutron shielding performance of a boron-containing neutron absorbing material was proposed for the first time through the establishment of a direct relationship between 10B areal density (10BAD) of the material and its neutron absorption ratio. It is found when the 10BAD of a material is greater than 0.034 g/cm2, the material will achieve a good neutron shielding performance. Based on this proposed approach, B4C/6061Al composite plates with different B4C content (10 wt%, 20 wt%, 30 wt%) were successfully fabricated using vacuum hot pressing followed by hot-extrusion. The characteristics of the B4C/Al interface were studied in details using transmission electron microscopy (TEM), and the effects of B4C particle content on microstructure and mechanical properties of the Al matrix were investigated. Through current studies, B4C/6061Al composite plates possessing good neutron shielding performance and tensile strength are found to be able to be fabricated using either 20 wt% of B4C content with a plate thickness of 4.5 mm or 30 wt% B4C content with a plate thickness of 3 mm.

  8. Analysis of SnS2 hyperdoped with V proposed as efficient absorber material.

    PubMed

    Seminovski, Yohanna; Palacios, Pablo; Wahnón, Perla

    2014-10-01

    Intermediate-band materials can improve the photovoltaic efficiency of solar cells through the absorption of two subband-gap photons that allow extra electron-hole pair formations. Previous theoretical and experimental findings support the proposal that the layered SnS2 compound, with a band-gap of around 2 eV, is a candidate for an intermediate-band material when it is doped with a specific transition-metal. In this work we characterize vanadium doped SnS2 using density functional theory at the dilution level experimentally found and including a dispersion correction combined with the site-occupancy-disorder method. In order to analyze the electronic characteristics that depend on geometry, two SnS2 polytypes partially substituted with vanadium in symmetry-adapted non-equivalent configurations were studied. In addition the magnetic configurations of vanadium in a SnS2 2H-polytype and its comparison with a 4H-polytype were also characterized. We demonstrate that a narrow intermediate-band is formed, when these dopant atoms are located in different layers. Our theoretical predictions confirm the recent experimental findings in which a paramagnetic intermediate-band material in a SnS2 2H-polytype with 10% vanadium concentration is obtained.

  9. Analysis of SnS2 hyperdoped with V proposed as efficient absorber material

    NASA Astrophysics Data System (ADS)

    Seminovski, Yohanna; Palacios, Pablo; Wahnón, Perla

    2014-10-01

    Intermediate-band materials can improve the photovoltaic efficiency of solar cells through the absorption of two subband-gap photons that allow extra electron-hole pair formations. Previous theoretical and experimental findings support the proposal that the layered SnS2 compound, with a band-gap of around 2 eV, is a candidate for an intermediate-band material when it is doped with a specific transition-metal. In this work we characterize vanadium doped SnS2 using density functional theory at the dilution level experimentally found and including a dispersion correction combined with the site-occupancy-disorder method. In order to analyze the electronic characteristics that depend on geometry, two SnS2 polytypes partially substituted with vanadium in symmetry-adapted non-equivalent configurations were studied. In addition the magnetic configurations of vanadium in a SnS2 2H-polytype and its comparison with a 4H-polytype were also characterized. We demonstrate that a narrow intermediate-band is formed, when these dopant atoms are located in different layers. Our theoretical predictions confirm the recent experimental findings in which a paramagnetic intermediate-band material in a SnS2 2H-polytype with 10% vanadium concentration is obtained.

  10. Scientists Identify New Family of Iron-Based Absorber Materials for Solar Cells (Fact Sheet), NREL Highlights, Science

    SciTech Connect

    Not Available

    2011-10-01

    Use of Earth-abundant materials in solar absorber films is critical for expanding the reach of photovoltaic (PV) technologies. The use of Earth-abundant and inexpensive Fe in PV was proposed more than 25 years ago in the form of FeS{sub 2} pyrite - fool's gold. Unfortunately, the material has been plagued by performance problems that to this day are both persistent and not well understood. Researchers from the National Renewable Energy Laboratory (NREL) and Oregon State University, working collaboratively in the Center for Inverse Design, an Energy Frontier Research Center, have uncovered several new insights into the problems of FeS{sub 2}. They have used these advances to propose and implement design rules that can be used to identify new Fe-containing materials that can circumvent the limitations of FeS{sub 2} pyrite. The team has identified that it is the unavoidable metallic secondary phases and surface defects coexisting near the FeS{sub 2} thin-film surfaces and grain boundaries that limit its open-circuit voltage, rather than the S vacancies in the bulk, which has long been commonly assumed. The materials Fe{sub 2}SiS{sub 4} and Fe{sub 2}GeS{sub 4} hold considerable promise as PV absorbers. The ternary Si compound is especially attractive, as it contains three of the more abundant low-cost elements available today. The band gap (E{sub g} = 1.5 eV) from both theory and experiment is higher than those of c-Si and FeS{sub 2}, offering better absorption of the solar spectrum and potentially higher solar cell efficiencies. More importantly, these materials do not have metallic secondary phase problems as seen in FeS{sub 2}. High calculated formation energies of donor-type defects are consistent with p-type carriers in thin films and are prospects for high open-circuit voltages in cells.

  11. Absorbed Gamma-Ray Doses due to Natural Radionuclides in Building Materials

    SciTech Connect

    Aguiar, Vitor A. P.; Medina, Nilberto H.; Moreira, Ramon H.; Silveira, Marcilei A. G.

    2010-05-21

    This work is devoted to the application of high-resolution gamma-ray spectrometry in the study of the effective dose coming from naturally occurring radionuclides, namely {sup 40}K, {sup 232}Th and {sup 238}U, present in building materials such as sand, cement, and granitic gravel. Four models were applied to estimate the effective dose and the hazard indices. The maximum estimated effective dose coming from the three reference rooms considered is 0.90(45) mSv/yr, and maximum internal hazard index is 0.77(24), both for the compact clay brick reference room. The principal gamma radiation sources are cement, sand and bricks.

  12. Modeling rammed earth wall using discrete element method

    NASA Astrophysics Data System (ADS)

    Bui, T.-T.; Bui, Q.-B.; Limam, A.; Morel, J.-C.

    2016-03-01

    Rammed earth is attracting renewed interest throughout the world thanks to its "green" characteristics in the context of sustainable development. Several research studies have thus recently been carried out to investigate this material. Some of them attempted to simulate the rammed earth's mechanical behavior by using analytical or numerical models. Most of these studies assumed that there was a perfect cohesion at the interface between earthen layers. This hypothesis proved to be acceptable for the case of vertical loading, but it could be questionable for horizontal loading. To address this problem, discrete element modeling seems to be relevant to simulate a rammed earth wall. To our knowledge, no research has been conducted thus far using discrete element modeling to study a rammed earth wall. This paper presents an assessment of the discrete element modeling's robustness for rammed earth walls. Firstly, a brief description of the discrete element modeling is presented. Then the parameters necessary for discrete element modeling of the material law of the earthen layers and their interfaces law following the Mohr-Coulomb model with a tension cut-off and post-peak softening were given. The relevance of the model and the material parameters were assessed by comparing them with experimental results from the literature. The results showed that, in the case of vertical loading, interfaces did not have an important effect. In the case of diagonal loading, model with interfaces produced better results. Interface characteristics can vary from 85 to 100% of the corresponding earthen layer's characteristics.

  13. Tunable microwave absorbing nano-material for X-band applications

    NASA Astrophysics Data System (ADS)

    Sadiq, Imran; Naseem, Shahzad; Ashiq, Muhammad Naeem; Khan, M. A.; Niaz, Shanawer; Rana, M. U.

    2016-03-01

    The effect of rare earth elements substitution in Sr1.96RE0.04Co2Fe27.80Mn0.2O46 (RE=Ce, Gd, Nd, La and Sm) X-type hexagonal ferrites prepared by using sol gel autocombustion method was studied. The XRD and FTIR analysis show the single phase of the prepared material. The lattice constants a (Å) and c (Å) varies with the additives. The particle size measured by Scherer formula for all the samples varies in the range of 54-100 nm and confirmed by the TEM analysis. The average grain size measured by SEM analysis lies in the range of 0.672-1.01 μm for all the samples. The Gd-substituted ferrite has higher value of coercivity (526.06 G) among all the samples which could be a good material for longitudinal recording media. The results also indicate that the Gd-substituted sample has maximum reflection loss of -25.2 dB at 11.878 GHz, can exhibit the best microwave absorption properties among all the substituted samples. Furthermore, the minimum value of reflection loss shifts towards the lower and higher frequencies with the substitution of rare earth elements which confirms that the microwave absorption properties can be tuned with the substitution of rare earth elements in pure ferrites. The peak value of attenuation constant at higher frequency agrees well the reflection loss data.

  14. A Versatile and Scalable Approach toward Robust Superhydrophobic Porous Materials with Excellent Absorbency and Flame Retardancy

    NASA Astrophysics Data System (ADS)

    Ruan, Changping; Shen, Mengxia; Ren, Xiaoyan; Ai, Kelong; Lu, Lehui

    2016-08-01

    The frequent oil spillages and the industrial discharge of organic contaminants have not only created severe environmental and ecological crises, but also cause a risk of fire and explosion. These environmental and safety issues emphasize the urgent need for materials that possess superior sorption capability and less flammability and thus can effectively and safely clean up the floating oils and water-insoluble organic compounds. Here we present the successful hydrophobic modification of the flame retardant melamine sponge with a commercial fluorosilicone, by using a facile one-step solvent-free approach and demonstrate that the resultant superhydrophobic sponge not only exhibits extraordinary absorption efficiency (including high capacity, superior selectivity, good recyclability, and simple recycling routes), but also retains excellent flame retardancy and robust stability. In comparison to conventional methods, which usually utilize massive organic solvents, the present approach does not involve any complicated process or sophisticated equipment nor generates any waste liquids, and thus is a more labor-saving, environment-friendly, energy-efficient and cost-effective strategy for the hydrophobic modification. Taking into account the critical role of hydrophobic porous materials, especially in the field of environmental remediation, the approach presented herein would be highly valuable for environmental remediation and industrial applications.

  15. A Versatile and Scalable Approach toward Robust Superhydrophobic Porous Materials with Excellent Absorbency and Flame Retardancy.

    PubMed

    Ruan, Changping; Shen, Mengxia; Ren, Xiaoyan; Ai, Kelong; Lu, Lehui

    2016-08-09

    The frequent oil spillages and the industrial discharge of organic contaminants have not only created severe environmental and ecological crises, but also cause a risk of fire and explosion. These environmental and safety issues emphasize the urgent need for materials that possess superior sorption capability and less flammability and thus can effectively and safely clean up the floating oils and water-insoluble organic compounds. Here we present the successful hydrophobic modification of the flame retardant melamine sponge with a commercial fluorosilicone, by using a facile one-step solvent-free approach and demonstrate that the resultant superhydrophobic sponge not only exhibits extraordinary absorption efficiency (including high capacity, superior selectivity, good recyclability, and simple recycling routes), but also retains excellent flame retardancy and robust stability. In comparison to conventional methods, which usually utilize massive organic solvents, the present approach does not involve any complicated process or sophisticated equipment nor generates any waste liquids, and thus is a more labor-saving, environment-friendly, energy-efficient and cost-effective strategy for the hydrophobic modification. Taking into account the critical role of hydrophobic porous materials, especially in the field of environmental remediation, the approach presented herein would be highly valuable for environmental remediation and industrial applications.

  16. A Versatile and Scalable Approach toward Robust Superhydrophobic Porous Materials with Excellent Absorbency and Flame Retardancy

    PubMed Central

    Ruan, Changping; Shen, Mengxia; Ren, Xiaoyan; Ai, Kelong; Lu, Lehui

    2016-01-01

    The frequent oil spillages and the industrial discharge of organic contaminants have not only created severe environmental and ecological crises, but also cause a risk of fire and explosion. These environmental and safety issues emphasize the urgent need for materials that possess superior sorption capability and less flammability and thus can effectively and safely clean up the floating oils and water-insoluble organic compounds. Here we present the successful hydrophobic modification of the flame retardant melamine sponge with a commercial fluorosilicone, by using a facile one-step solvent-free approach and demonstrate that the resultant superhydrophobic sponge not only exhibits extraordinary absorption efficiency (including high capacity, superior selectivity, good recyclability, and simple recycling routes), but also retains excellent flame retardancy and robust stability. In comparison to conventional methods, which usually utilize massive organic solvents, the present approach does not involve any complicated process or sophisticated equipment nor generates any waste liquids, and thus is a more labor-saving, environment-friendly, energy-efficient and cost-effective strategy for the hydrophobic modification. Taking into account the critical role of hydrophobic porous materials, especially in the field of environmental remediation, the approach presented herein would be highly valuable for environmental remediation and industrial applications. PMID:27501762

  17. Preparation and low-frequency microwave-absorbing properties of MWCNTs/Co-Ni/Fe3O4 hybrid material

    NASA Astrophysics Data System (ADS)

    Lu, Shao-Wei; Yuan, Chao-Jun; Jia, Cai-Xia; Ma, Ke-Ming; Wang, Xiao-Qiang

    2016-04-01

    MWCNTs/Co-Ni/Fe3O4 hybrid material has been successfully prepared by electroless plating and coprecipitation method, which is applied to the low-frequency microwave absorption. Their surface morphology, structure, magnetism and electromagnetic properties in the low-frequency range of 1-4GHz were characterized by field-emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and vector network analyzer. Results indicated that magnetic Co-Ni/Fe3O4 particles were attached on the surface of multi-walled carbon nanotubes successfully. The saturation magnetization of MWCNTs/Co-Ni/Fe3O4 hybrid materials was 68.6emu/g and the coercivity is 17.9 Oe. The electromagnetic and microwave absorbing properties analysis in the low-frequency range of 1-4GHz indicated that the hybrid material exhibited excellent magnetic loss and the maximum reflection loss could reach -13.57dB at 1.51GHz with 1.05GHz bandwidth below -5dB.

  18. Surface Modification of Fuel Cladding Materials with Integral Fuel BUrnable Absorber Boron

    SciTech Connect

    Dr. Kumar Sridharan; Dr. Todd Allen; Jesse Gudmundson; Benjamin Maier

    2008-11-03

    Integral fuel burnable absorgers (IFBA) are added to some rods in the fuel assembly to counteract excessive reactivity. These IFBA elements (usually boron or gadolinium) are presently incorporated in the U)2 pellets either by mixing in the pellets or as coatings on the pellet surface. In either case, the incorporation of ifba into the fuel has to be performed in a nuclear-regulated facility that is physically separated from the main plant. These operations tend to be costly and can add from 20 to 30% to the manufacturing cost of the fuel. The goal of this NEER research project was to develop an alternative approach that involves incorporation of IFBA element boron at the surface of the fuel cladding material.

  19. Time-bin quantum RAM

    NASA Astrophysics Data System (ADS)

    Moiseev, E. S.; Moiseev, S. A.

    2016-11-01

    We have proposed a compact scheme of quantum random access memory (qRAM) based on the impedance matched multi-qubit photon echo quantum memory incorporated with the control four-level atom in two coupled QED cavities. A set of matching conditions for basic physical parameters of the qRAM scheme that provides an efficient quantum control of the fast single photon storage and readout has been found. In particular, it has been discovered that the efficient qRAM operations are determined by the specific properties of the excited photonic molecule coupling the two QED cavities. Herein, the maximal efficiency of the qRAM is realized when the cooperativity parameter of the photonic molecule equals to unity that can be experimentally achievable. We have also elaborated upon the new quantum address scheme where the multi-time-bin photon state is used for the control of the four-level atom during the readout of the photonic qubits from the quantum memory. The scheme reduces the required number of logical elements to one. Experimental implementation by means of current quantum technologies in the optical and microwave domains is also discussed.

  20. [Using UV-Vis Absorbance for Characterization of Maturity in Composting Process with Different Materials].

    PubMed

    Zhao, Yue; Wei, Yu-quan; Li, Yang; Xi, Bei-dou; Wei, Zi-min; Wang, Xing-lei; Zhao, Zhi-nan; Ding, Jei

    2015-04-01

    The present study was conducted to assess the degree of humification in DOM during composting using different raw materials, and their effect on maturity of compost based on UV-Vis spectra measurements and chemometrics method. The raw materials of composting studied included chicken manure, pig manure, kitchen waste, lawn waste, fruits and vegetables waste, straw waste, green waste, sludge, and municipal solid waste. During composting, the parameters of UV-Vis spectra of DOM, including SUVA254 , SUVA280 , E250/E365, E4/E6, E2/E4, E2/E6, E253/E203, E253/E220, A226-400, S275-295 and S350-400 were calculated, Statistical analysis indicated that all the parameter were significantly changed during composting. SUVA254 and SUVA280 of DOM were continuously increased, E250/E365 and E4/E6 were continuously decreased in DOM, while A226-400, S275-295 and S350-400 of DOM at the final stage were significantly different with those at other stages of composting. Correlation analysis indicated that the parameters were significantly correlated with each other except for E2/E4 and E235/E203. Furthermore, principal component analysis suggested that A226-400, SUVA254, S350-400, SUVA280 and S275~295 were reasonable parameters for assessing the compost maturity. To distinguish maturity degree among different composts, hierarchical cluster analysis, an integrated tool utilizing multiple UV-Vis parameters, was performed based on the data (A226-400, SUVA254, S350-400, SUVA280 and S275-295) of DOM derived from the final stage of composting. Composts from different sources were clustered into 2 groups. The first group included chicken manure, pig manure, lawn waste, fruits and vegetables waste, green waste, sludge, and municipal solid waste characterized by a lower maturity degree, and the second group contained straw waste and kitchen waste associated with a higher maturity degree. The above results suggest that a multi-index of UV-Vis spectra could accurately evaluate the compost maturity

  1. Bottom-up approach for microstructure optimization of sound absorbing materials.

    PubMed

    Perrot, Camille; Chevillotte, Fabien; Panneton, Raymond

    2008-08-01

    Results from a numerical study examining micro-/macrorelations linking local geometry parameters to sound absorption properties are presented. For a hexagonal structure of solid fibers, the porosity phi, the thermal characteristic length Lambda('), the static viscous permeability k(0), the tortuosity alpha(infinity), the viscous characteristic length Lambda, and the sound absorption coefficient are computed. Numerical solutions of the steady Stokes and electrical equations are employed to provide k(0), alpha(infinity), and Lambda. Hybrid estimates based on direct numerical evaluation of phi, Lambda('), k(0), alpha(infinity), Lambda, and the analytical model derived by Johnson, Allard, and Champoux are used to relate varying (i) throat size, (ii) pore size, and (iii) fibers' cross-section shapes to the sound absorption spectrum. The result of this paper tends to demonstrate the important effect of throat size in the sound absorption level, cell size in the sound absorption frequency selectivity, and fibers' cross-section shape in the porous material weight reduction. In a hexagonal porous structure with solid fibers, the sound absorption level will tend to be maximized with a 48+/-10 microm throat size corresponding to an intermediate resistivity, a 13+/-8 microm fiber radius associated with relatively small interfiber distances, and convex triangular cross-section shape fibers allowing weight reduction.

  2. Evaluation of absorbent materials for use as ad hoc dry decontaminants during mass casualty incidents as part of the UK’s Initial Operational Response (IOR)

    PubMed Central

    Kassouf, Nick; Syed, Sara; Larner, Joanne; Amlôt, Richard

    2017-01-01

    The UK’s Initial Operational Response (IOR) is a revised process for the medical management of mass casualties potentially contaminated with hazardous materials. A critical element of the IOR is the introduction of immediate, on-scene disrobing and decontamination of casualties to limit the adverse health effects of exposure. Ad hoc cleansing of the skin with dry absorbent materials has previously been identified as a potential means of facilitating emergency decontamination. The purpose of this study was to evaluate the in vitro oil and water absorbency of a range of materials commonly found in the domestic and clinical environments and to determine the effectiveness of a small, but representative selection of such materials in skin decontamination, using an established ex vivo model. Five contaminants were used in the study: methyl salicylate, parathion, diethyl malonate, phorate and potassium cyanide. In vitro measurements of water and oil absorbency did not correlate with ex vivo measurements of skin decontamination. When measured ex vivo, dry decontamination was consistently more effective than a standard wet decontamination method (“rinse-wipe-rinse”) for removing liquid contaminants. However, dry decontamination was ineffective against particulate contamination. Collectively, these data confirm that absorbent materials such as wound dressings and tissue paper provide an effective, generic capability for emergency removal of liquid contaminants from the skin surface, but that wet decontamination should be used for non-liquid contaminants. PMID:28152053

  3. Evaluation of absorbent materials for use as ad hoc dry decontaminants during mass casualty incidents as part of the UK's Initial Operational Response (IOR).

    PubMed

    Kassouf, Nick; Syed, Sara; Larner, Joanne; Amlôt, Richard; Chilcott, Robert P

    2017-01-01

    The UK's Initial Operational Response (IOR) is a revised process for the medical management of mass casualties potentially contaminated with hazardous materials. A critical element of the IOR is the introduction of immediate, on-scene disrobing and decontamination of casualties to limit the adverse health effects of exposure. Ad hoc cleansing of the skin with dry absorbent materials has previously been identified as a potential means of facilitating emergency decontamination. The purpose of this study was to evaluate the in vitro oil and water absorbency of a range of materials commonly found in the domestic and clinical environments and to determine the effectiveness of a small, but representative selection of such materials in skin decontamination, using an established ex vivo model. Five contaminants were used in the study: methyl salicylate, parathion, diethyl malonate, phorate and potassium cyanide. In vitro measurements of water and oil absorbency did not correlate with ex vivo measurements of skin decontamination. When measured ex vivo, dry decontamination was consistently more effective than a standard wet decontamination method ("rinse-wipe-rinse") for removing liquid contaminants. However, dry decontamination was ineffective against particulate contamination. Collectively, these data confirm that absorbent materials such as wound dressings and tissue paper provide an effective, generic capability for emergency removal of liquid contaminants from the skin surface, but that wet decontamination should be used for non-liquid contaminants.

  4. Enantiomeric analysis of beta-pinene and limonene by direct coupling of reversed phase liquid chromatography and gas chromatography using absorbents as packing materials.

    PubMed

    Flores, Gema; Ruiz del Castillo, Maria Luisa; Herraiz, Marta

    2007-11-01

    A method based on the use of absorbents as packing materials inside the interface of the online coupling between RPLC and GC is proposed for the enantiomeric analysis of beta-pinene and limonene in essential oils. For that purpose, a comparison of the RSD, detection limit and recovery provided by two absorbents and one adsorbent is included in this study. The results found in this work proved the validity of absorbents as packing materials in online RPLC-GC to determine minor compounds in complex matrices. In particular, PDMS seemed to be specially useful to analyse nonpolar compounds, such as beta-pinene and limonene, since it provided higher sensitivity for this kind of compounds. The developed method was applied to the evaluation of the natural and non-natural character of commercial essential oils by means of the determination of the enantiomeric composition of beta-pinene and limonene.

  5. Study of the Use of Oxygen-Absorbing Packaging Material to Prolong Shelf-Life of Rations

    DTIC Science & Technology

    2010-05-28

    unlimited. The effectiveness of a new oxygen absorbing packaging technology in modifying the inner atmosphere to very low residual oxygen retarding...attached 3 Summary The effectiveness of a new oxygen absorbing packaging technology in modifying the inner atmosphere to very low residual...packaged products according to product specifications (Phase I); (2) identifying the relationship between food moisture content and activation of

  6. Radio-Absorbing Materials

    DTIC Science & Technology

    2007-11-02

    Transliteration Block Italic Transliteratic:. Ae A 4 A, a P p Pp R , r Su 6 B, b C c C S, s 8 B Ba V , v T T T m T.t Fr r a G, g Y y Y y U, u a D P , d...image on the scren^f th ahd -ray i tub ofthez sina I z f. rqrii r be A rns placed on both sides of takeoff and landing strip. System Microvision works...I or in Requester: FTD/TQTR ’I S RA&I Approved for public release; distribution unlimited. TAB b. I)U. , ou c I d II r_. [uistribatto’!/ ,A v ui

  7. Fan/Ram Duct Program

    DTIC Science & Technology

    1973-10-01

    turbofan engine shutoff scheme, the ram duct flow conditions, and the Ian duct shutoff vane area transi- tion schedule. This loss will be...airflow. The performance of the turbofan is neglected until the main engine burner is ignited. At that time it is assumed that the turbo - fan...B. Transient Operation . . .. TRANSIENT TRANSITION TEST CASES A. Turbofan to Ramjet B. Ramjet to Turbo fan CONCLUSIONS AND RECOMMENDATIONS

  8. Study of the antifungal potential of novel cellulose/copper composites as absorbent materials for fruit juices.

    PubMed

    Llorens, Amparo; Lloret, Elsa; Picouet, Pierre; Fernandez, Avelina

    2012-08-17

    Cellulose/copper composites with antifungal properties have been synthesized by physical/chemical methods. Physical treatments by heat or by a combination of heat and UV radiation provided composites with metallic copper and excellent interfacial adhesion; in contrast, chemical reduction with borohydride generated small although partially aggregated copper oxide nanoparticles. Copper micro/nano-particles and copper ions (Cu(2+)) were released from the cellulose matrix at an adequate rate to achieve a strong antimicrobial activity against Saccharomyces cerevisiae in in vitro experiments. Moreover, the copper oxide composites showed an excellent antifungal activity in pineapple and melon juice, reducing about 4 log cycles the loads of spoilage-related yeasts and moulds. The metallic copper composites reduced in 4 log cycles the load of yeasts and moulds in pineapple juice, although their antifungal activity was weaker in contact with melon juice. Copper loaded absorbent materials could be selectively implemented during the shelf-life of minimally processed fruits to reduce the number of spoilage-related microorganisms in the drip.

  9. Evaluation of absorbed dose in irradiated sugar-containing plant material (peony roots) by an ESR method

    NASA Astrophysics Data System (ADS)

    Yamaoki, Rumi; Kimura, Shojiro; Ohta, Masatoshi

    2015-12-01

    The relationship between electron spin resonance (ESR) signal intensity of irradiated plant materials and sugar content was investigated by spectral analysis using peony roots. A weak background signal near g=2.005 was observed in the roots. After a 10 kGy irradiation, the ESR line broadened and the intensity increased, and the spectral characteristics were similar to a typical spectrum of irradiated food containing crystalline sugars. The free radical concentration was nearly stable 30 days after irradiation. The spectrum of peony root 30 days after irradiation was simulated using the summation of the intensities of six assumed components: radical signals derived from (a) sucrose, (b) glucose, (c) fructose, (d) cellulose, (e) the background signal near g=2.005 and (f) unidentified component. The simulated spectra using the six components were in agreement with the observed sample spectra. The intensity of sucrose radical signal in irradiated samples increased proportionally up to 20 kGy. In addition, the intensity of sucrose radical signals was strongly correlated with the sucrose contents of the samples. The results showed that the radiation sensitivity of sucrose in peony roots was influenced little by other plant constituents. There was also a good correlation between the total area of the spectra and the sucrose content, because the sucrose content was higher than that of other sugars in the samples. In peony roots, estimation of the absorbed dose from the ESR signal intensity may be possible by a calibration method based on the sucrose content.

  10. Distribution of absorbed doses in the materials irradiated by ''RHODOTRON'' electron accelerator: Experiment and Monte Carlo simulations

    SciTech Connect

    Oleg E. Krivosheev et al.

    2001-07-02

    This paper describes the experimental setup and presents studies of absorbed doses in different metals and dielectrics along with corresponding Monte Carlo energy deposition simulations. Experiments were conducted using a 5 MeV electron accelerator. We used several Monte Carlo code systems, namely MARS, MCNP, and GEANT to simulate the absorbed doses under the same conditions as in experiment. We compare calculated and measured high and low absorbed doses (from few kGy to hundreds kGy) and discuss the applicability of these computer codes for applied accelerator dosimetry.

  11. Research and Applications Modules (RAM), phase B study

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The research and applications modules (RAM) system is discussed. The RAM is a family of payload carrier modules that can be delivered to and retrieved from earth orbit by the space shuttle. The RAM's capability for implementing a wide range of manned and man-tended missions is described. The rams have evolved into three types; (1) pressurized RAMs, (2) unpressurized RAMs, and (3) pressurizable free-flying RAMs. A reference experiment plan for use as a baseline in the derivation and planning of the RAM project is reported. The plan describes the number and frequency of shuttle flights dedicated to RAM missions and the RAM payloads for the identified flights.

  12. HyRAM Testing Script.

    SciTech Connect

    Parkins, Owen

    2014-12-01

    The testing script is to provide a method of inspections to HyRAM (v1.0.0.244 Alpha) application features. This document will lead participants through the use of the application to make sure the application performs as designed. If a feature of the application becomes non-working, this script will relay useful information back to the designers of the application so that the feature can be fixed. This is essential to keep the application updated and performing as designed so that the users of this program can be satisfied. There will be frequent updates of this document to ensure proper testing of future application versions.

  13. Feasibility of Integrated Insulation in Rammed Earth

    NASA Astrophysics Data System (ADS)

    Stone, C.; Balintova, M.; Holub, M.

    2015-11-01

    Building Codes in Europe stipulate strict thermal performance criteria which any traditional rammed earth recipe cannot meet. This does not infer that the material itself is inferior; it has many other face saving attributes such as low embodied energy, high workability, sound insulation, fire resistance, aesthetics, high diffusivity and thermal accumulation properties. Integrated insulation is experimented with, to try achieve a 0.22 [W/(m2.K)] overall coefficient of heat transfer for walls required by 2015 Slovak standards, without using external insulation or using technologically complex interstitial insulation. This has the added aesthetic benefit of leaving the earth wall exposed to the external environment. Results evaluate the feasibility of this traditional approach.

  14. Liquid Cryogen Absorber for MICE

    SciTech Connect

    Baynham, D.E.; Bish, P.; Bradshaw, T.W.; Cummings, M.A.; Green,M.A.; Ishimoto, S.; Ivaniouchenkov, I.; Lau, W.; Yang, S.Q.; Zisman, M.S.

    2005-08-20

    The Muon Ionization Cooling Experiment (MICE) will test ionization cooling of muons. In order to have effective ionization cooling, one must use an absorber that is made from a low-z material. The most effective low z materials for ionization cooling are hydrogen, helium, lithium hydride, lithium and beryllium, in that order. In order to measure the effect of material on cooling, several absorber materials must be used. This report describes a liquid-hydrogen absorber that is within a pair of superconducting focusing solenoids. The absorber must also be suitable for use with liquid helium. The following absorber components are discussed in this report; the absorber body, its heat exchanger, the hydrogen system, and the hydrogen safety. Absorber cooling and the thin windows are not discussed here.

  15. Light scattering by dust particles (PROGRA2 experiment): size and structure effects for transparent and absorbing materials

    NASA Astrophysics Data System (ADS)

    Hadamcik, E.; Renard, J.-B.; Lasue, J.; Levasseur-Regourd, A. C.

    2007-08-01

    1- Introduction Cometary and possibly interplanetary dust particles seem to be mainly made of agglomerates of submicron and micron-sized grains. These particles are among the most primitive in our solar system. Regoliths on asteroidal and planetary surfaces seem to be loose materials produced by impinging meteorites on the surface of small bodies. Comparing their physical properties is thus fundamental to understand their evolution. To interpret remote observations of solar light scattered by dust particles and regoliths, it is necessary to use numerical and experimental simulations [1,2,3]. 2- PROGRA2 experiment PROGRA2 instruments are polarimeters; the light sources are two randomly polarized lasers (632.8 nm and 543.5 nm). Levitating particles (in microgravity or lifted by an air-draught) are studied by imaging polarimetry. Details on the instruments can be found in [4,5]. 3- Samples Two kinds of samples are studied: compact particles in the (1-400) micrometer size range and fluffy aggregates in the same size range, made from submicron and micronsized grains. The materials are transparent silica and absorbing carbon. Some deposited particles are huge agglomerates of micron-sized grains produced by random ballistic deposition of single grains [6,7] or produced by evaporation of mixtures in alcohol of fluffy aggregates of submicron-sized grains. Two samples are made of silica spheres coated by a carbonaceous black compound. Cometary analogues are mixtures of silica and amorphous carbon or Mg-Fe silicates mixed with amorphous carbon. 4- Results Phase curves and their main parameters (negative polarization at small phase angles and maximum polarization, Pmax, at 90-100° phase angle) for the different materials will be compared and related to the physical properties. For example, it is well known by numerical simulations and/or by experiments that the maximum polarization decreases when the size (submicrometer range) of the grains increases [2,8,9]. An inverse rule

  16. Combining linear polarization spectroscopy and the Representative Layer Theory to measure the Beer-Lambert law absorbance of highly scattering materials.

    PubMed

    Gobrecht, Alexia; Bendoula, Ryad; Roger, Jean-Michel; Bellon-Maurel, Véronique

    2015-01-01

    Visible and Near Infrared (Vis-NIR) Spectroscopy is a powerful non destructive analytical method used to analyze major compounds in bulk materials and products and requiring no sample preparation. It is widely used in routine analysis and also in-line in industries, in-vivo with biomedical applications or in-field for agricultural and environmental applications. However, highly scattering samples subvert Beer-Lambert law's linear relationship between spectral absorbance and the concentrations. Instead of spectral pre-processing, which is commonly used by Vis-NIR spectroscopists to mitigate the scattering effect, we put forward an optical method, based on Polarized Light Spectroscopy to improve the absorbance signal measurement on highly scattering samples. This method selects part of the signal which is less impacted by scattering. The resulted signal is combined in the Absorption/Remission function defined in Dahm's Representative Layer Theory to compute an absorbance signal fulfilling Beer-Lambert's law, i.e. being linearly related to concentration of the chemicals composing the sample. The underpinning theories have been experimentally evaluated on scattering samples in liquid form and in powdered form. The method produced more accurate spectra and the Pearson's coefficient assessing the linearity between the absorbance spectra and the concentration of the added dye improved from 0.94 to 0.99 for liquid samples and 0.84-0.97 for powdered samples.

  17. Architecture of the sperm whale forehead facilitates ramming combat.

    PubMed

    Panagiotopoulou, Olga; Spyridis, Panagiotis; Mehari Abraha, Hyab; Carrier, David R; Pataky, Todd C

    2016-01-01

    Herman Melville's novel Moby Dick was inspired by historical instances in which large sperm whales (Physeter macrocephalus L.) sank 19th century whaling ships by ramming them with their foreheads. The immense forehead of sperm whales is possibly the largest, and one of the strangest, anatomical structures in the animal kingdom. It contains two large oil-filled compartments, known as the "spermaceti organ" and "junk," that constitute up to one-quarter of body mass and extend one-third of the total length of the whale. Recognized as playing an important role in echolocation, previous studies have also attributed the complex structural configuration of the spermaceti organ and junk to acoustic sexual selection, acoustic prey debilitation, buoyancy control, and aggressive ramming. Of these additional suggested functions, ramming remains the most controversial, and the potential mechanical roles of the structural components of the spermaceti organ and junk in ramming remain untested. Here we explore the aggressive ramming hypothesis using a novel combination of structural engineering principles and probabilistic simulation to determine if the unique structure of the junk significantly reduces stress in the skull during quasi-static impact. Our analyses indicate that the connective tissue partitions in the junk reduce von Mises stresses across the skull and that the load-redistribution functionality of the former is insensitive to moderate variation in tissue material parameters, the thickness of the partitions, and variations in the location and angle of the applied load. Absence of the connective tissue partitions increases skull stresses, particularly in the rostral aspect of the upper jaw, further hinting of the important role the architecture of the junk may play in ramming events. Our study also found that impact loads on the spermaceti organ generate lower skull stresses than an impact on the junk. Nevertheless, whilst an impact on the spermaceti organ would

  18. Architecture of the sperm whale forehead facilitates ramming combat

    PubMed Central

    Spyridis, Panagiotis; Mehari Abraha, Hyab; Carrier, David R.; Pataky, Todd C.

    2016-01-01

    Herman Melville’s novel Moby Dick was inspired by historical instances in which large sperm whales (Physeter macrocephalus L.) sank 19th century whaling ships by ramming them with their foreheads. The immense forehead of sperm whales is possibly the largest, and one of the strangest, anatomical structures in the animal kingdom. It contains two large oil-filled compartments, known as the “spermaceti organ” and “junk,” that constitute up to one-quarter of body mass and extend one-third of the total length of the whale. Recognized as playing an important role in echolocation, previous studies have also attributed the complex structural configuration of the spermaceti organ and junk to acoustic sexual selection, acoustic prey debilitation, buoyancy control, and aggressive ramming. Of these additional suggested functions, ramming remains the most controversial, and the potential mechanical roles of the structural components of the spermaceti organ and junk in ramming remain untested. Here we explore the aggressive ramming hypothesis using a novel combination of structural engineering principles and probabilistic simulation to determine if the unique structure of the junk significantly reduces stress in the skull during quasi-static impact. Our analyses indicate that the connective tissue partitions in the junk reduce von Mises stresses across the skull and that the load-redistribution functionality of the former is insensitive to moderate variation in tissue material parameters, the thickness of the partitions, and variations in the location and angle of the applied load. Absence of the connective tissue partitions increases skull stresses, particularly in the rostral aspect of the upper jaw, further hinting of the important role the architecture of the junk may play in ramming events. Our study also found that impact loads on the spermaceti organ generate lower skull stresses than an impact on the junk. Nevertheless, whilst an impact on the spermaceti organ

  19. Cellulose-silver nanoparticle hybrid materials to control spoilage-related microflora in absorbent pads located in trays of fresh-cut melon.

    PubMed

    Fernández, Avelina; Picouet, Pierre; Lloret, Elsa

    2010-08-15

    The antimicrobial activity of newly developed cellulose-silver nanoparticle hybrid materials was investigated during storage of minimally processed "Piel de Sapo" melon. Silver nanoparticles were produced after in-situ reduction by physical methods of 1% silver nitrate adsorbed on cellulose fibres; they accounted between 5 and 35 nm diameter, and were not aggregated. Fresh-cut melon pieces were stored for 10 days at 4 degrees C under natural modified atmosphere packaging, in presence or absence of silver loaded absorbent pads. The evolution of headspace gas composition, quality parameters, and the antimicrobial activity against spoilage-related microorganisms were investigated. The cellulose-silver nanoparticle hybrid materials released silver ions after melon juice impregnated the pad. The released silver ions were particularly useful to control the population of spoilage-related microorganisms in cellulose based absorbent pads in contact with vegetable matrices, showing a low chelating effect against silver ions; the lag phases of the microorganisms were considerably incremented and microbial loads in the pads remained in average approx. 3 log(10) CFU/g below the control during the investigated storage period. Furthermore, the presence of silver loaded absorbent pads retarded the senescence of the melon cuts, presenting remarkably lower yeast counts, lower degrees Brix values, and a juicier appearance after 10 days of storage.

  20. Use of absorbent materials in on-line coupled reversed-phase liquid chromatography-gas chromatography via the through oven transfer adsorption desorption interface.

    PubMed

    Flores, Gema; Díaz-Plaza, Eva María; Cortés, Jose Manuel; Villén, Jesús; Herraiz, Marta

    2008-11-21

    The use of absorbents as retaining materials in the through oven transfer adsorption desorption interface (TOTAD) of an on-line coupled reversed-phase liquid chromatography-gas chromatography system (RPLC-GC) is proposed for the first time. A comparative study of an adsorbent (Tenax TA) and two absorbents, namely polydimethylsiloxane and poly(50% phenyl/50% methylsiloxane) is performed to establish the best experimental conditions for the automated and simultaneous determination of 15 organophosphorus and organochlorine pesticide residues in olive oil. The proposed method provides satisfactory repeatability (RSDs lower, in general, than 8.5%) and sensitivity (limits of detection ranging from 0.6 to 81.9 microg/L) for the investigated compounds.

  1. Sound Absorbers

    NASA Astrophysics Data System (ADS)

    Fuchs, H. V.; Möser, M.

    Sound absorption indicates the transformation of sound energy into heat. It is, for instance, employed to design the acoustics in rooms. The noise emitted by machinery and plants shall be reduced before arriving at a workplace; auditoria such as lecture rooms or concert halls require a certain reverberation time. Such design goals are realised by installing absorbing components at the walls with well-defined absorption characteristics, which are adjusted for corresponding demands. Sound absorbers also play an important role in acoustic capsules, ducts and screens to avoid sound immission from noise intensive environments into the neighbourhood.

  2. Optical addressing technique for a CMOS RAM

    NASA Technical Reports Server (NTRS)

    Wu, W. H.; Bergman, L. A.; Allen, R. A.; Johnston, A. R.

    1988-01-01

    Progress on optically addressing a CMOS RAM for a feasibility demonstration of free space optical interconnection is reported in this paper. The optical RAM chip has been fabricated and functional testing is in progress. Initial results seem promising. New design and SPICE simulation of optical gate cell (OGC) circuits have been carried out to correct the slow fall time of the 'weak pull down' OGC, which has been characterized experimentally. Methods of reducing the response times of the photodiodes and the associated circuits are discussed. Even with the current photodiode, it appears that an OGC can be designed with a performance that is compatible with a CMOS circuit such as the RAM.

  3. Transient simulation of ram accelerator flowfields

    NASA Astrophysics Data System (ADS)

    Drabczuk, Randall P.; Rolader, G.; Dash, S.; Sinha, N.; York, B.

    1993-01-01

    This paper describes the development of an advanced computational fluid dynamic (CFD) simulation capability in support of the USAF Armament Directorate ram accelerator research initiative. The state-of-the-art CRAFT computer code has been specialized for high fidelity, transient ram accelerator simulations via inclusion of generalized dynamic gridding, solution adaptive grid clustering, and high pressure thermo-chemistry. Selected ram accelerator simulations are presented that serve to exhibit the CRAFT code capabilities and identify some of the principle research/design Issues.

  4. Transient simulation of ram accelerator flowfields

    NASA Astrophysics Data System (ADS)

    Sinha, N.; York, B. J.; Dash, S. M.; Drabczuk, R.; Rolader, G. E.

    1992-10-01

    This paper describes the development of an advanced computational fluid dynamic (CFD) simulation capability in support of the U.S. Air Force Armament Directorate's ram accelerator research initiative. The state-of-the-art CRAFT computer code has been specialized for high fidelity, transient ram accelerator simulations via inclusion of generalized dynamic gridding, solution adaptive grid clustering, high pressure thermochemistry, etc. Selected ram accelerator simulations are presented which serve to exhibit the CRAFT code's capabilities and identify some of the principal research/design issues.

  5. Effects of increased collagen-matrix density on the mechanical properties and in vivo absorbability of hydroxyapatite-collagen composites as artificial bone materials.

    PubMed

    Yunoki, Shunji; Sugiura, Hiroaki; Ikoma, Toshiyuki; Kondo, Eiji; Yasuda, Kazunori; Tanaka, Junzo

    2011-02-01

    The aim of this study was to evaluate the effects of increased collagen-matrix density on the mechanical properties and in vivo absorbability of porous hydroxyapatite (HAp)-collagen composites as artificial bone materials. Seven types of porous HAp-collagen composites were prepared from HAp nanocrystals and dense collagen fibrils. Their densities and HAp/collagen weight ratios ranged from 122 to 331 mg cm⁻³ and from 20/80 to 80/20, respectively. The flexural modulus and strength increased with an increase in density, reaching 2.46 ± 0.48 and 0.651 ± 0.103 MPa, respectively. The porous composites with a higher collagen-matrix density exhibited much higher mechanical properties at the same densities, suggesting that increasing the collagen-matrix density is an effective way of improving the mechanical properties. It was also suggested that other structural factors in addition to collagen-matrix density are required to achieve bone-like mechanical properties. The in vivo absorbability of the composites was investigated in bone defects of rabbit femurs, demonstrating that the absorption rate decreased with increases in the composite density. An exhaustive increase in density is probably limited by decreases in absorbability as artificial bones.

  6. A facile fabrication of chemically converted graphene oxide thin films and their uses as absorber materials for solar cells

    NASA Astrophysics Data System (ADS)

    Adelifard, Mehdi; Darudi, Hosein

    2016-07-01

    There is a great interest in the use of graphene sheets in thin film solar cells with low-cost and good-optoelectronic properties. Here, the production of absorbent conductive reduced graphene oxide (RGO) thin films was investigated. RGO thin films were prepared from spray-coated graphene oxide (GO) layers at various substrate temperature followed by a simple hydrazine-reducing method. The structural, morphological, optical, and electrical characterizations of graphene oxide (GO) and RGO thin films were investigated. X-ray diffraction analysis showed a phase shift from GO to RGO due to hydrazine treatment, in agreement with the FTIR spectra of the layers. FESEM images clearly exhibited continuous films resulting from the overlap of graphene nanosheets. The produced low-cost thin films had high absorption coefficient up to 1.0 × 105 cm-1, electrical resistance as low as 0.9 kΩ/sq, and effective optical band gap of about 1.50 eV, close to the optimum value for solar conversion. The conductive absorbent properties of the reduced graphene oxide thin films would be useful to develop photovoltaic cells.

  7. Energy-Saving RAM-Power Tap

    NASA Technical Reports Server (NTRS)

    Bruner, Alan Roy

    1987-01-01

    Reverse-flow HEXFET(R) minimizes voltage drop and power dissipation. HEXFET(R) scheme reduces voltage drop by approximately 80 percent. Design for power tap for random-access memory (RAM) has potential application in digital systems.

  8. Effect of sound-absorbing materials on intensity of disturbances in the shock layer on a flat plate aligned at an angle of attack

    NASA Astrophysics Data System (ADS)

    Maslov, A. A.; Mironov, S. G.; Poplavskaya, T. V.; Tsyryulnikov, I. S.; Kirilovskiy, S. V.

    2012-03-01

    Results of a numerical and experimental study of characteristics of disturbances in a hypersonic shock layer on a flat plate covered by a sound-absorbing coating and aligned at an angle of attack are presented. Experiments and computations are performed for the free-stream Mach number M ∞ = 21 and Reynolds number Re L = 6 · 104. A possibility of suppressing pressure fluctuations in the shock layer at frequencies of 20-40 kHz with the use of tubular and porous materials incorporated into the plate surface is demonstrated. Results of numerical simulations are found to be in good agreement with experimental data.

  9. RAMS (Risk Analysis - Modular System) methodology

    SciTech Connect

    Stenner, R.D.; Strenge, D.L.; Buck, J.W.

    1996-10-01

    The Risk Analysis - Modular System (RAMS) was developed to serve as a broad scope risk analysis tool for the Risk Assessment of the Hanford Mission (RAHM) studies. The RAHM element provides risk analysis support for Hanford Strategic Analysis and Mission Planning activities. The RAHM also provides risk analysis support for the Hanford 10-Year Plan development activities. The RAMS tool draws from a collection of specifically designed databases and modular risk analysis methodologies and models. RAMS is a flexible modular system that can be focused on targeted risk analysis needs. It is specifically designed to address risks associated with overall strategy, technical alternative, and `what if` questions regarding the Hanford cleanup mission. RAMS is set up to address both near-term and long-term risk issues. Consistency is very important for any comparative risk analysis, and RAMS is designed to efficiently and consistently compare risks and produce risk reduction estimates. There is a wide range of output information that can be generated by RAMS. These outputs can be detailed by individual contaminants, waste forms, transport pathways, exposure scenarios, individuals, populations, etc. However, they can also be in rolled-up form to support high-level strategy decisions.

  10. Broadband patterned magnetic microwave absorber

    SciTech Connect

    Li, Wei; Wu, Tianlong; Wang, Wei; Guan, Jianguo; Zhai, Pengcheng

    2014-07-28

    It is a tough task to greatly improve the working bandwidth for the traditional flat microwave absorbers because of the restriction of available material parameters. In this work, a simple patterning method is proposed to drastically broaden the absorption bandwidth of a conventional magnetic absorber. As a demonstration, an ultra-broadband microwave absorber with more than 90% absorption in the frequency range of 4–40 GHz is designed and experimentally realized, which has a thin thickness of 3.7 mm and a light weight equivalent to a 2-mm-thick flat absorber. In such a patterned absorber, the broadband strong absorption is mainly originated from the simultaneous incorporation of multiple λ/4 resonances and edge diffraction effects. This work provides a facile route to greatly extend the microwave absorption bandwidth for the currently available absorbing materials.

  11. Neutron Absorbing Alloys

    SciTech Connect

    Mizia, Ronald E.; Shaber, Eric L.; DuPont, John N.; Robino, Charles V.; Williams, David B.

    2004-05-04

    The present invention is drawn to new classes of advanced neutron absorbing structural materials for use in spent nuclear fuel applications requiring structural strength, weldability, and long term corrosion resistance. Particularly, an austenitic stainless steel alloy containing gadolinium and less than 5% of a ferrite content is disclosed. Additionally, a nickel-based alloy containing gadolinium and greater than 50% nickel is also disclosed.

  12. Theoretical and experimental study of the diffuse transmission of light through highly concentrated absorbing and scattering materials. Part I: Monte-Carlo simulations

    NASA Astrophysics Data System (ADS)

    Bressel, L.; Reich, O.

    2014-10-01

    In many technical materials and commercial products like sunscreen or paint high particle and absorber concentrations are present. An important parameter for slabs of these materials is the diffuse transmission of light, which quantifies the total amount of directly and diffusely transmitted light. Due to the high content of scattering particles not only multiple scattering but also additional dependent scattering occurs. Hence, simple analytical models cannot be applied to calculate the diffuse transmission. In this work a Monte-Carlo program for the calculation of the diffuse transmission of light through dispersions in slab-like geometry containing high concentrations of scattering particles and absorbers is presented and discussed in detail. Mie theory is applied for the calculation of the scattering properties of the samples. Additionally, dependent scattering is considered in two different models, the well-known hard sphere model in the Percus-Yevick approximation (HSPYA) and the Yukawa model in the Mean Spherical Approximation (YMSA). Comparative experiments will show the accurateness of the program as well as its applicability to real samples [1].

  13. HyRAM Testing Strategy and Quality Design Elements.

    SciTech Connect

    Reynolds, John Thomas

    2014-12-01

    Strategy document and tentative schedule for testing of HyRAM, a software toolkit that integrates data and methods relevant to assessing the safety of hydrogen fueling and storage infrastructure. Because proposed and existing features in HyRAM that support testing are important factors in this discussion, relevant design considerations of HyRAM are also discussed. However, t his document does not cover all of HyRAM desig n, nor is the full HyRAM software development schedule included.

  14. Sodium antimony sulfide (NaSbS2): Turning an unexpected impurity into a promising, environmentally friendly novel solar absorber material

    NASA Astrophysics Data System (ADS)

    Rahayu, Siti Utari; Chou, Chia-Ling; Suriyawong, Nipapon; Aragaw, Belete Asefa; Shi, Jen-Bin; Lee, Ming-Way

    2016-11-01

    We present a novel absorber material—NaSbS2—for solar cells. NaSbS2 is formed as an unexpected byproduct in the chemical synthesis of Sb2S3. However, NaSbS2 has many attractive features for a solar material. Here single phase NaSbS2 nanoparticles were synthesized through solution processing. NaSbS2 semiconductor-sensitized solar cells were demonstrated for the first time. The best cell yielded Jsc = 10.76 mA/cm2, Voc = 0.44 V, FF = 48.6%, and efficiency η = 2.30% under 1 sun. At the reduced 0.1 sun, the η increased to 3.18%—a respectable η for a new solar material.

  15. Epidemiology of Haemophilus somnus in young rams.

    PubMed Central

    Lees, V W; Meek, A H; Rosendal, S

    1990-01-01

    The prevalence of Haemophilus somnus in the prepuce of young rams was examined. Of 473 rams entering Record of Performance (ROP) stations at 50 days of age, 43 (9.1%) were positive. Average daily gain was not affected by Haemophilus status, but was influenced by breed of ram. Suffolks were predicted to gain 0.515 kg daily compared to 0.427 kg for a group combining all other breeds. Using logistic regression to identify risk factors for individual H. somnus infection, rams in 1989 were 0.382 times as likely to be infected as rams in 1988, and Suffolks were 0.314 times as likely to be infected as the other breeds group, but these factors were not significant at the flock level. Of 80 eligible flocks of origin, 22 (27.5%) were classified as infected with H. somnus, based on rams submitted to the ROP station. Infected flocks contributed 133 rams, 43 (32.3%) of which were positive. There was no association between H. somnus status and lambing percent of the percent of abortions and stillbirths, but there was a statistically significant association with the percent of ewes which failed to lamb. In the model developed, 6% of the bred ewes in noninfected flocks failed to lamb, compared to a rate of 12% in infected flocks. These results suggest H. somnus may influence ewe fertility earlier, rather than later in gestation. Purchasing replacement animals and having cattle on the farm were risk factors for Haemophilus infection in the flock. Where replacements had been purchased within the previous year, the risk of flock infection rose 8.5 times, and on farms having cattle as well as sheep, the risk rose 13.2 times.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2379113

  16. Apollo couch energy absorbers

    NASA Technical Reports Server (NTRS)

    Wesselski, C. J.; Drexel, R. E.

    1972-01-01

    Load attenuators for the Apollo spacecraft crew couch and its potential applications are described. Energy absorption is achieved through friction and cyclic deformation of material. In one concept, energy absorption is accomplished by rolling a compressed ring of metal between two surfaces. In another concept, energy is absorbed by forcing a plastically deformed washer along a rod. Among the design problems that had to be solved were material selection, fatigue life, ring slippage, lubrication, and friction loading.

  17. Experimental model studies of a hydraulic ram with special emphasis on the velocities in the ram tube

    NASA Astrophysics Data System (ADS)

    Basfeld, M.

    1980-12-01

    The velocity of the ram tube to make it accessible for production in pattern flows examining human circulation was investigated. A simplified theory of the function of the hydraulic ram was developed using the Navier-Stokes equation for a square rubbing component for one dimensional flows. The influence of the valve movement on the ram efficiency is evaluated. The difference between the significance of the influences on the ram model as opposed to the technical ram is discussed.

  18. FPS-RAM: Fast Prefix Search RAM-Based Hardware for Forwarding Engine

    NASA Astrophysics Data System (ADS)

    Zaitsu, Kazuya; Yamamoto, Koji; Kuroda, Yasuto; Inoue, Kazunari; Ata, Shingo; Oka, Ikuo

    Ternary content addressable memory (TCAM) is becoming very popular for designing high-throughput forwarding engines on routers. However, TCAM has potential problems in terms of hardware and power costs, which limits its ability to deploy large amounts of capacity in IP routers. In this paper, we propose new hardware architecture for fast forwarding engines, called fast prefix search RAM-based hardware (FPS-RAM). We designed FPS-RAM hardware with the intent of maintaining the same search performance and physical user interface as TCAM because our objective is to replace the TCAM in the market. Our RAM-based hardware architecture is completely different from that of TCAM and has dramatically reduced the costs and power consumption to 62% and 52%, respectively. We implemented FPS-RAM on an FPGA to examine its lookup operation.

  19. A new method to retrieve spectral absorption coefficient of highly-scattering and weakly-absorbing materials

    NASA Astrophysics Data System (ADS)

    Dombrovsky, Leonid A.

    2016-03-01

    A significant uncertainty in the absorption coefficient of highly scattering dispersed materials is typical in the spectral ranges of very weak absorption. The traditional way to identify the main absorption and scattering characteristics of semi-transparent materials is based on spectral measurements of normal-hemispherical reflectance and transmittance for the material sample. Unfortunately this way cannot be used in the case of in vivo measurements of optical properties of biological tissues. A method suggested in the present paper is based on thermal response to the periodic radiative heating of the open surface of a semi-transparent material. It is shown that the period of a variation of the surface temperature is sensitive to the value of an average absorption coefficient in the surface layer. As a result, the monochromatic external irradiation combined with the surface temperature measurements can be used to retrieve the spectral values of absorption coefficient. Possible application of this method to porous semi-transparent ceramics is considered. An example problem is also solved to illustrate the applicability of this method to human skin. The approach suggested enables one to estimate an average absorption coefficient of human skin of a patient just before the thermal processing.

  20. Structural Responses and Finite Element Modeling of Hakka Tulou Rammed Earth Structures

    NASA Astrophysics Data System (ADS)

    Sranislawski, Daniel

    Hakka Tulous are rammed earth structures that have survived the effects of aging and natural elements upwards of even over a thousand years. These structures have housed the Hakka people of the Fujian Province, China in natural yet modern housing that has provided benefits over newer building materials. The key building material, rammed earth, which is used for the walls of the Hakka Tulou structures, has provided structural stability along with thermal comfort to the respective inhabitants of the Hakka Tulous. Through material testing and analysis this study has examined how the Tulou structures have maintained their structural stability while also providing thermal comfort. Reports of self healing cracks in the rammed earth walls were also analyzed for their validity in this study. The study has found that although the story of the self healing crack cannot be validated, there is reason to believe that with the existence of lime, some type of autogenous healing could occur on a small scale. The study has also found, through the use of nondestructive testing, that both the internal wooden systems (flooring, roof, and column support) and the rammed earth walls, are still structurally sound. Also, rammed earth's high thermal mass along with the use of sufficient shading has allowed for a delay release of heat energy from the walls of the Tulous, thus providing thermal comfort that can be felt during both night and day temperatures. The Hakka Tulou structures have been found to resist destruction from natural disasters such as strong earthquakes even when more modern construction has not. Through finite element modeling, this study has shown that the high volume of rammed earth used in the construction of the Hakka Tulous helps dissipate lateral force energy into much lower stresses for the rammed earth wall. This absorption of lateral force energy allows the rammed earth structures to survive even the strongest of earthquakes experienced in the region. The Hakka

  1. Seasonal profiles of melatonin in adult rams.

    PubMed

    Sheikheldin, M A; Howland, B E; Palmer, W M

    1992-03-01

    The objective of this study was to investigate the seasonal changes in melatonin profiles based on frequently collected samples in adult rams maintained under simulated natural photoperiod. In a group of six rams, the seasonal changes of melatonin were characterized in samples collected at 10-min intervals for an equal period before and after the median of the scotophase during the spring (March) and the autumn (September) equinoxes, and also during the summer (June) and the winter (December) solstices. In an additional two rams, the rapid changes in melatonin concentrations were investigated in samples drawn at 2-min intervals for a 2-hr period before and after the median of the scotophase, but only during the summer and the winter solstices. The results show that in adult rams there is a distinct seasonal variation in the nightly rise of melatonin (P less than 0.01). Mean concentrations in June and September were higher than in March or December (P less than 0.05). There was no difference between the means in June or September. However, the means in March were lower than in December (P less than 0.05). Rapid changes in melatonin concentrations occurred in samples collected either at 10-min or 2-min intervals. In rams sampled at 2-min intervals, mean melatonin values in June were also higher than in December (P less than 0.01). The results suggest that there are distinct seasonal changes in melatonin concentrations in the ram and that rapid changes in melatonin concentrations reflect pulsatile secretion.

  2. Effect of zeolite nano-materials and artichoke (Cynara scolymus L.) leaf extract on increase in urinary clearance of systematically absorbed nicotine.

    PubMed

    Malekshah, R E; Mahjub, R; Rastgarpanah, M; Ghorbani, M; Partoazar, A R; Mehr, S E; Dehpour, A R; Dorkoosh, F A

    2012-12-01

    Nicotine, the main pharmacologically active component in tobacco and cigarette, has some toxic effects and also high potential for addiction. In this study, the effect of artichoke (Cynara scolymus L.) and zeolite nano-materials on urinary excretion of nicotine and consequently elimination of systematically absorbed nicotine was investigated. A simple, valid and highly sensitive high performance liquid chromatography method has been developed for determination of nicotine in rat urine according to guidelines for bioanalysis.It was found that nano-zeolites can cause increase in urinary concentration of nicotine due to its high surface adsorption. Artichoke leaf extract can cause increase in urinary excretion of nicotine in longer post administration times. It was observed that co-administration of nanozeolites and the leaf extract has the synergetic effect on increasing the urinary excretion of nicotine.

  3. Determination of fat-soluble vitamins and carotenoids in standard reference material 3280 multivitamin/multielement tablets by liquid chromatography with absorbance detection.

    PubMed

    Thomas, Jeanice B; Sharpless, Katherine E; Yen, James H; Rimmer, Catherine A

    2011-01-01

    The concentrations of selected fat-soluble vitamins and carotenoids in Standard Reference Material (SRM) 3280 Multivitamin/Multielement Tablets have been determined by two independent LC methods, with measurements performed by the National Institute of Standards and Technology (NIST). This SRM has been prepared as part of a collaborative effort between NIST and the National Institutes of Health Office of Dietary Supplements. The SRM is also intended to support the Dietary Supplement Ingredient Database that is being established by the U.S. Department of Agriculture. The methods used at NIST to determine the concentration levels of vitamins A and E, and beta-carotene in the SRM used RPLC with absorbance detection. The relative precision of these methods ranged from 2 to 8% for the analytes measured. SRM 3280 is primarily intended for use in validating analytical methods for the determination of selected vitamins, carotenoids, and elements in multivitamin/multielement tablets and similar matrixes.

  4. Guided tissue regeneration. Absorbable barriers.

    PubMed

    Wang, H L; MacNeil, R L

    1998-07-01

    Over the past 15 years, techniques aimed at regeneration of lost periodontal tissue have become widely used and accepted in clinical practice. Among these techniques are those which use the principles of guided tissue regeneration (GTR), wherein barriers (i.e., membranes) are used to control cell and tissue repopulation of the periodontal wound. A variety of non-absorbable and absorbable barriers have been developed and used for this purpose, with a trend in recent years toward increased use of absorbable GTR materials. This article describes the evolution of absorbable barrier materials and overview materials available for clinical use today. In addition, advantages and disadvantages of these materials are discussed, as well as possible new developments in barrier-based GTR therapy.

  5. Use of co-combustion bottom ash to design an acoustic absorbing material for highway noise barriers

    SciTech Connect

    Arenas, Celia; Leiva, Carlos; Vilches, Luis F.

    2013-11-15

    Highlights: • The particle size of bottom ash influenced the acoustic behavior of the barrier. • The best sound absorption coefficients were measured for larger particle sizes. • The maximum noise absorption is displaced to lower frequencies for higher thickness. • A noise barrier was designed with better properties than commercial products. • Recycling products from bottom ash no present leaching and radioactivity problems. - Abstract: The present study aims to determine and evaluate the applicability of a new product consisting of coal bottom ash mixed with Portland cement in the application of highway noise barriers. In order to effectively recycle the bottom ash, the influence of the grain particle size of bottom ash, the thickness of the panel and the combination of different layers with various particle sizes have been studied, as well as some environmental properties including leachability (EN-12457-4, NEN-7345) and radioactivity tests. Based on the obtained results, the acoustic properties of the final composite material were similar or even better than those found in porous concrete used for the same application. According to this study, the material produced presented no environmental risk.

  6. Extracting material parameters from x-ray attenuation: a CT feasibility study using kilovoltage synchrotron x-rays incident upon low atomic number absorbers.

    PubMed

    Kirby, B J; Davis, J R; Grant, J A; Morgan, M J

    2003-10-21

    The work reported here is a feasibility study of the extraction of material parameters from measurements of the linear x-ray attenuation coefficient of low atomic number absorbers. Computed tomography (CT) scans of small samples containing several liquids and solids were carried out with synchrotron radiation at the Australian National Beamline Facility (BL 20B) in Japan. Average values of the x-ray linear attenuation coefficient were extracted for each material for x-ray energies ranging from 11 keV to 20.5 keV. The electron density was estimated by applying results derived from a parametrization of the x-ray linear attenuation coefficient first developed by Jackson and Hawkes and extended for this work. Average estimates for the electron density of triethanolamine and acetic acid were made to within +5.3% of the actual value. Other materials examined included furfuraldehyde, perspex and teflon, for which average estimates of the electron density were less than 10% in excess of the calculated value.

  7. Ram side of Wake Shield Facility

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The ram side of the Wake Shield Facility (WSF) is in the grasp of the Space Shuttle Discovery's Remote Manipulator System (RMS) arm in this 70mm frame. Clouds over the Atlantic Ocean and the blackness of space share the backdrop for the picture.

  8. Projectile Combustion Effects on Ram Accelerator Performance

    NASA Astrophysics Data System (ADS)

    Chitale, Saarth Anjali

    University of Washington Abstract Projectile Combustion Effects on Ram Accelerator Performance Saarth Anjali Chitale Chair of the Supervisory Committee: Prof. Carl Knowlen William E. Boeing Department of Aeronautics and Astronautics The ram accelerator facility at the University of Washington is used to propel projectiles at supersonic velocities. This concept is similar to an air-breathing ramjet engine in that sub-caliber projectiles, shaped like the ramjet engine center-body, are shot through smooth-bore steel-walled tubes having an internal diameter of 38 mm. The ram accelerator propulsive cycles operate between Mach 2 to 10 and have the potential to accelerate projectile to velocities greater than 8 km/s. The theoretical thrust versus Mach number characteristics can be obtained using knowledge of gas dynamics and thermodynamics that goes into the design of the ram accelerator. The corresponding velocity versus distance profiles obtained from the test runs at the University of Washington, however, are often not consistent with the theoretical predictions after the projectiles reach in-tube Mach numbers greater than 4. The experimental velocities are typically greater than the expected theoretical predictions; which has led to the proposition that the combustion process may be moving up onto the projectile. An alternative explanation for higher than predicted thrust, which is explored here, is that the performance differences can be attributed to the ablation of the projectile body which results in molten metal being added to the flow of the gaseous combustible mixture around the projectile. This molten metal is assumed to mix uniformly and react with the gaseous propellant; thereby enhancing the propellant energy release and altering the predicted thrust-Mach characteristics. This theory predicts at what Mach number the projectile will first experience enhanced thrust and the corresponding velocity-distance profile. Preliminary results are in good agreement

  9. 24. WESTERNMOST HYDRAULIC RAM IN NORTH BANK, LOWER LEVEL OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. WESTERNMOST HYDRAULIC RAM IN NORTH BANK, LOWER LEVEL OF STAGE, LOOKING SOUTH. NOTE PIN CONNECTION BETWEEN STAGE FLOOR AND RAM. - Auditorium Building, 430 South Michigan Avenue, Chicago, Cook County, IL

  10. 116. Stage mezzanine level floor structure. North rams (type D), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    116. Stage mezzanine level floor structure. North rams (type D), facing south-southwest. The right hand ram is the same one visible from above in IL-1007-114. - Auditorium Building, 430 South Michigan Avenue, Chicago, Cook County, IL

  11. 3. Light tower, view northwest, south side Ram Island ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Light tower, view northwest, south side - Ram Island Light Station, Ram Island, south of Ocean Point & just north of Fisherman Island, marking south side of Fisherman Island Passage, Ocean Point, Lincoln County, ME

  12. Synthesis of a novel composite imprinted material based on multiwalled carbon nanotubes as a selective melamine absorbent.

    PubMed

    Zhang, Huabin; Zhang, Zhaohui; Hu, Yufang; Yang, Xiao; Yao, Shouzhuo

    2011-02-23

    A novel composite imprinted material, on the basis of a multiwalled carbon nanotube (CNT)-incorporated layer using melamine as a template, methacrylic acid as a functional monomer, and ethylene glycol dimethacrylate as a cross-linker, was synthesized by a surface imprinting technique. The imprinted/CNT sorbent was characterized by a scanning electron microscope (SEM). Adsorption dynamics and a Scatchard adsorption model were employed to evaluate the adsorption process. The results showed that the imprinted/CNT sorbent displayed a rapid dynamic adsorption and a high adsorption capacity of 79.9 μmol g(-1) toward melamine. Applied as a sorbent, the imprinted/CNT sorbent was used for the determination of melamine in a real sample by online solid-phase extraction-high-performance liquid chromatography (SPE-HPLC). An enrichment ratio of 563-fold, detection limit (S/N = 3) of 0.3 μg L(-1), and quantification limit of 4.5 μg L(-1) were achieved.

  13. Reliability and Maintainability (RAM) Training

    NASA Technical Reports Server (NTRS)

    Lalli, Vincent R. (Editor); Malec, Henry A. (Editor); Packard, Michael H. (Editor)

    2000-01-01

    The theme of this manual is failure physics-the study of how products, hardware, software, and systems fail and what can be done about it. The intent is to impart useful information, to extend the limits of production capability, and to assist in achieving low-cost reliable products. In a broader sense the manual should do more. It should underscore the urgent need CI for mature attitudes toward reliability. Five of the chapters were originally presented as a classroom course to over 1000 Martin Marietta engineers and technicians. Another four chapters and three appendixes have been added, We begin with a view of reliability from the years 1940 to 2000. Chapter 2 starts the training material with a review of mathematics and a description of what elements contribute to product failures. The remaining chapters elucidate basic reliability theory and the disciplines that allow us to control and eliminate failures.

  14. Thermal conversion of an Fe3O4@metal-organic framework: a new method for an efficient Fe-Co/nanoporous carbon microwave absorbing material

    NASA Astrophysics Data System (ADS)

    Zhang, Xingmiao; Ji, Guangbin; Liu, Wei; Quan, Bin; Liang, Xiaohui; Shang, Chaomei; Cheng, Yan; Du, Youwei

    2015-07-01

    A novel FeCo nanoparticle embedded nanoporous carbon composite (Fe-Co/NPC) was synthesized via in situ carbonization of dehydro-ascorbic acid (DHAA) coated Fe3O4 nanoparticles encapsulated in a metal-organic framework (zeolitic imidazolate framework-67, ZIF-67). The molar ratio of Fe/Co significantly depends on the encapsulated content of Fe3O4 in ZIF-67. The composites filled with 50 wt% of the Fe-Co/NPC-2.0 samples in paraffin show a maximum reflection loss (RL) of -21.7 dB at a thickness of 1.2 mm; in addition, a broad absorption bandwidth for RL < -10 dB which covers from 12.2 to 18 GHz can be obtained, and its minimum reflection loss and bandwidth (RL values exceeding -10 dB) are far greater than those of commercial carbonyl iron powder under a very low thickness (1-1.5 mm). This study not only provides a good reference for future preparation of carbon-based lightweight microwave absorbing materials but also broadens the application of such kinds of metal-organic frameworks.A novel FeCo nanoparticle embedded nanoporous carbon composite (Fe-Co/NPC) was synthesized via in situ carbonization of dehydro-ascorbic acid (DHAA) coated Fe3O4 nanoparticles encapsulated in a metal-organic framework (zeolitic imidazolate framework-67, ZIF-67). The molar ratio of Fe/Co significantly depends on the encapsulated content of Fe3O4 in ZIF-67. The composites filled with 50 wt% of the Fe-Co/NPC-2.0 samples in paraffin show a maximum reflection loss (RL) of -21.7 dB at a thickness of 1.2 mm; in addition, a broad absorption bandwidth for RL < -10 dB which covers from 12.2 to 18 GHz can be obtained, and its minimum reflection loss and bandwidth (RL values exceeding -10 dB) are far greater than those of commercial carbonyl iron powder under a very low thickness (1-1.5 mm). This study not only provides a good reference for future preparation of carbon-based lightweight microwave absorbing materials but also broadens the application of such kinds of metal-organic frameworks. Electronic

  15. Effects of ram preexposure and ram breed on fertility of ewes in summer breeding.

    PubMed

    Nugent, R A; Notter, D R; McClure, W H

    1988-07-01

    Suffolk x Rambouillet ewes were used in two consecutive years to test the ability of Dorset and Suffolk yearling rams to stimulate ovulation and estrus in early summer (late June and July) breeding. After spring weaning about June 1, ewes were randomly divided into three groups and for 2 wk either were isolated from rams or were preexposed to either yearling Dorset or Suffolk rams by penning of rams in proximity to ewes. Ewes then were rerandomized into two groups for joining with either yearling Dorset or Suffolk rams fitted with marking harnesses. Serum progesterone profiles and crayon marks were used as indicators of ovulation and estrus. Overall lambing rate was not different among preexposure treatments for the 2 yr. However, early lambing rate (in the first 14 d of lambing season) was significantly affected by preexposure group (24% for Dorset vs 9% for Suffolk and 10% for isolation), especially in the 2nd yr (31% for Dorset vs 8% for both Suffolk and isolation). Ewes preexposed to Dorsets also lambed 10 d earlier (P less than .05) than ewes preexposed to Suffolks in yr 2, but the groups did not differ in yr 1. Ewes exposed to Dorset rams for breeding had higher overall lambing rates than ewes bred to Suffolks (75% vs 54%), especially in the 1st yr (77% vs 48%). Lambs sired by Dorset rams were born 6 d earlier in yr 1 (P less than .05) but only 1 d earlier in yr 2. Data from both years indicate that Dorsets are superior to Suffolks in ability to sire lambs in fall lambing systems.

  16. Synthesis and microwave absorbing characteristics of functionally graded carbonyl iron/polyurethane composites

    NASA Astrophysics Data System (ADS)

    Yang, R. B.; Liang, W. F.; Wu, C. H.; Chen, C. C.

    2016-05-01

    Radar absorbing materials (RAMs) also known as microwave absorbers, which can absorb and dissipate incident electromagnetic wave, are widely used in the fields of radar-cross section reduction, electromagnetic interference (EMI) reduction and human health protection. In this study, the synthesis of functionally graded material (FGM) (CI/Polyurethane composites), which is fabricated with semi-sequentially varied composition along the thickness, is implemented with a genetic algorithm (GA) to optimize the microwave absorption efficiency and bandwidth of FGM. For impedance matching and broad-band design, the original 8-layered FGM was obtained by the GA method to calculate the thickness of each layer for a sequential stacking of FGM from 20, 30, 40, 50, 60, 65, 70 and 75 wt% of CI fillers. The reflection loss of the original 8-layered FGM below -10 dB can be obtained in the frequency range of 5.12˜18 GHz with a total thickness of 9.66 mm. Further optimization reduces the number of the layers and the stacking sequence of the optimized 4-layered FGM is 20, 30, 65, 75 wt% with thickness of 0.8, 1.6, 0.6 and 1.0 mm, respectively. The synthesis and measurement of the optimized 4-layered FGM with a thickness of 4 mm reveal a minimum reflection loss of -25.2 dB at 6.64 GHz and its bandwidth below - 10 dB is larger than 12.8 GHz.

  17. Investigation of advanced propulsion technologies: The RAM accelerator and the flowing gas radiation heater

    NASA Technical Reports Server (NTRS)

    Bruckner, A. P.; Knowlen, C.; Mattick, A. T.; Hertzberg, A.

    1992-01-01

    The two principal areas of advanced propulsion investigated are the ram accelerator and the flowing gas radiation heater. The concept of the ram accelerator is presented as a hypervelocity launcher for large-scale aeroballistic range applications in hypersonics and aerothermodynamics research. The ram accelerator is an in-bore ramjet device in which a projectile shaped like the centerbody of a supersonic ramjet is propelled in a stationary tube filled with a tailored combustible gas mixture. Combustion on and behind the projectile generates thrust which accelerates it to very high velocities. The acceleration can be tailored for the 'soft launch' of instrumented models. The distinctive reacting flow phenomena that have been observed in the ram accelerator are relevant to the aerothermodynamic processes in airbreathing hypersonic propulsion systems and are useful for validating sophisticated CFD codes. The recently demonstrated scalability of the device and the ability to control the rate of acceleration offer unique opportunities for the use of the ram accelerator as a large-scale hypersonic ground test facility. The flowing gas radiation receiver is a novel concept for using solar energy to heat a working fluid for space power or propulsion. Focused solar radiation is absorbed directly in a working gas, rather than by heat transfer through a solid surface. Previous theoretical analysis had demonstrated that radiation trapping reduces energy loss compared to that of blackbody receivers, and enables higher efficiencies and higher peak temperatures. An experiment was carried out to measure the temperature profile of an infrared-active gas and demonstrate the effect of radiation trapping. The success of this effort validates analytical models of heat transfer in this receiver, and confirms the potential of this approach for achieving high efficiency space power and propulsion.

  18. Optical Addressing And Clocking Of RAM's

    NASA Technical Reports Server (NTRS)

    Johnston, Alan R.; Nixon, Robert H.; Bergman, Larry A.; Esener, Sadik

    1989-01-01

    Proposed random-access-memory (RAM) addressing system, in which memory linked optically to read/write logic circuits, greatly increases computer operating speed. System - comprises addressing circuits including numerous lasers as signal sources, numerous optical gates including optical detectors associated with memory cells, and holographic element to direct light signals to desired memory-cell locations - applied to high-capacity digital systems, supercomputers, and complex microcircuits.

  19. Ram Pressure Stripping: Observations Meet Simulations

    NASA Astrophysics Data System (ADS)

    Past, Matthew; Ruszkowski, Mateusz; Sharon, Keren

    2017-01-01

    Ram pressure stripping occurs when a galaxy falls into the potential well of a cluster, removing gas and dust as the galaxy travels through the intracluster medium. This interaction leads to filamentary gas tails stretching behind the galaxy and plays an important role in galaxy evolution. Previously, these “jellyfish” galaxies had only been observed in nearby clusters, but recently, higher redshift (z > 0.3) examples have been found from HST data imaging.Recent work has shown that cosmic rays injected by supernovae can cause galactic disks to thicken due to cosmic ray pressure. We run three-dimensional magneto-hydrodynamical simulations of ram pressure stripping including cosmic rays to compare to previous models. We study how the efficiency of the ram pressure stripping of the gas, and the morphology of the filamentary tails, depend on the magnitude of the cosmic ray pressure support. We generate mock X-ray images and radio polarization data. Simultaneously, we perform an exhaustive search of the HST archive to increase the sample of jellyfish galaxies and compare selected cases to simulations.

  20. Review of Radar Absorbing Materials

    DTIC Science & Technology

    2005-01-01

    DeAngelis, A. R.; Childs, A. D.; Green, D. E., US Patent 5,720,892. 1998. (58) Genies, E. M.; Petrescu, C.; Olmedo , L. Synth. Met. 1991, 41-43, 665...S.H. J. Appl. Poly. Sci. 1999, 74, 2094. (74) Olmedo , L., Hourquebie, P., Jousse, F. Synth. Met. 1995, 69, 205 (75) Pitman, E. H., Kuhn, H.H., US...Condensed Matter 1998, 10, 5595. (168) Mohamed, A. B. H.; Miane, J. L.; Zangar, H. Polymer International 2001, 50, 773. (169) Olmedo , L

  1. Urinary tract ultrasonography in normal rams and in rams with obstructive urolithiasis

    PubMed Central

    Braun, Ueli; Schefer, Ursula; Föhn, Josef

    1992-01-01

    We determined the position, dimensions, and structure of the kidneys, ureters, bladder, and urethra in 20 healthy, adult rams by use of ultrasonography. The findings were compared with those of seven rams with obstructive urolithiasis, thus establishing criteria for the diagnosis of urolithiasis via ultrasonography. A 5.0 MHz convex transducer was placed over the right paralumbar fossa to examine the kidneys, and a 5.0 MHz linear rectal transducer was used to examine the bladder and urethra transrectally. All examinations were performed on standing rams. The left kidney had a length of 8.4 ± 0.3 cm (mean ± SD), a width of 4.7 ± 0.3 cm, and a depth of 4.4 ± 0.3 cm. The diameter of the renal sinus of the left kidney was 1.5 ± 0.2 cm. The circumference of the medullary pyramids measured 2.8 ± 0.3 cm. Similar ultrasonographic measurements were obtained for the right kidney. The mean diameter of the bladder of 12 rams was 7.5 ± 2.8 cm. The diameter of the bladder could not be determined in the remaining eight rams because it was greater than 10 cm and therefore beyond the penetration depth of the scanner. The only part of the urethra which could be visualized ultrasonographically was the internal urethral orifice. It had a diameter of 0.2 ± 0.1 cm. Ultrasonographic examination of seven rams with obstructive urolithiasis revealed a markedly dilated urethra and urinary bladder. Due to severe cystitis, the contents of the urinary bladder appeared as multiple, tiny, uniformly distributed echoes. The renal pelvis and medullary pyramids of both kidneys were dilated in four rams. In two rams, uroperitoneum and accumulation of urine in the abdomen were diagnosed via ultrasonography. In one ram this was due to a ruptured ureter and in one to a ruptured bladder. The results of this study indicate that ultrasonography is a useful aid in the diagnosis of obstructive urolithiasis. ImagesFigure 2.Figure 3.Figure 4.Figure 5.Figure 6.Figure 7. PMID:17424090

  2. Truly Absorbed Microbial Protein Synthesis, Rumen Bypass Protein, Endogenous Protein, and Total Metabolizable Protein from Starchy and Protein-Rich Raw Materials: Model Comparison and Predictions.

    PubMed

    Parand, Ehsan; Vakili, Alireza; Mesgaran, Mohsen Danesh; van Duinkerken, Gert; Yu, Peiqiang

    2015-07-29

    This study was carried out to measure truly absorbed microbial protein synthesis, rumen bypass protein, and endogenous protein loss, as well as total metabolizable protein, from starchy and protein-rich raw feed materials with model comparisons. Predictions by the DVE2010 system as a more mechanistic model were compared with those of two other models, DVE1994 and NRC-2001, that are frequently used in common international feeding practice. DVE1994 predictions for intestinally digestible rumen undegradable protein (ARUP) for starchy concentrates were higher (27 vs 18 g/kg DM, p < 0.05, SEM = 1.2) than predictions by the NRC-2001, whereas there was no difference in predictions for ARUP from protein concentrates among the three models. DVE2010 and NRC-2001 had highest estimations of intestinally digestible microbial protein for starchy (92 g/kg DM in DVE2010 vs 46 g/kg DM in NRC-2001 and 67 g/kg DM in DVE1994, p < 0.05 SEM = 4) and protein concentrates (69 g/kg DM in NRC-2001 vs 31 g/kg DM in DVE1994 and 49 g/kg DM in DVE2010, p < 0.05 SEM = 4), respectively. Potential protein supplies predicted by tested models from starchy and protein concentrates are widely different, and comparable direct measurements are needed to evaluate the actual ability of different models to predict the potential protein supply to dairy cows from different feedstuffs.

  3. The ram accelerator - A chemically driven mass launcher

    NASA Technical Reports Server (NTRS)

    Kaloupis, P.; Bruckner, A. P.

    1988-01-01

    The ram accelerator, a chemically propelled mass driver, is presented as a viable new approach for directly launching acceleration-insensitive payloads into low earth orbit. The propulsion principle is similar to that of a conventional air-breathing ramjet. The cargo vehicle resembles the center-body of a ramjet and travels through a tube filled with a pre-mixed fuel and oxidizer mixture. The launch tube acts as the outer cowling of the ramjet and the combustion process travels with the vehicle. Two drive modes of the ram accelerator propulsion system are described, which when used in sequence are capable of accelerating the vehicle to as high as 10 km/sec. The requirements are examined for placing a 2000 kg vehicle into a 500 km orbit with a minimum of on-board rocket propellant for circularization maneuvers. It is shown that aerodynamic heating during atmospheric transit results in very little ablation of the nose. An indirect orbital insertion scenario is selected, utilizing a three step maneuver consisting of two burns and aerobraking. An on-board propulsion system using storable liquid propellants is chosen in order to minimize propellant mass requirements, and the use of a parking orbit below the desired final orbit is suggested as a means to increase the flexibility of the mass launch concept. A vehicle design using composite materials is proposed that will best meet the structural requirements, and a preliminary launch tube design is presented.

  4. Stability of (Cs, K)Al4Be5B11O28 (londonite) at high pressure and high temperature: a potential neutron absorber material

    NASA Astrophysics Data System (ADS)

    Gatta, G. Diego; Vignola, Pietro; Lee, Yongjae

    2011-06-01

    The stability and the thermo-elastic behaviour of a natural londonite [^{{1a}} ( {Cs_{{0.36}} K_{{0.34}} Rb_{{0.15}} Ca_{{0.04}} Na_{{0.02}} } )_{Σ 0.91}{}^{{4e}} ( {Al_{{3.82}} Li_{{0.05}} Fe_{{0.02}} } )_{{Σ 3.89}}{}^{{4e}} ( {Be_{{3.82}} B_{{0.18}} } )_{{Σ 4}}{}^{{12h}} ( {B_{{10.97}} Be1 Si_{{0.01}} } )_{{Σ 11.98}} O_{{28}}] has been investigated up to 1,273(3) K (at 0.0001 GPa) and up to 4.85(5) GPa (at 298 K) by means of in situ X-ray powder diffraction. Up to 973 K, no evidence of phase transition or anomalous thermo-elastic behaviour was observed. At T > 973 K, londonite shows the first evidence of an irreversible structure destabilisation. The volume thermal expansion coefficient between 298 and 973 K is α0 = 2.38(6)·10-5 K-1. Londonite shows an elastic behaviour up to 4.85 GPa. No phase transition has been observed within the pressure range investigated. P- V data fitted with a second-order Birch-Murnaghan equation of state give V 0 = 389.1(1)Å3 and K T0 = 280(12) GPa. On the basis of the good thermo-elastic behaviour, substantiated by the significantly low compressibility, the modest thermal expansion up to 1,000 K and the significantly high amount of boron (B2O3 50wt%), londonite-type materials could be considered as potential inorganic host for 10B in composite neutron-absorbing materials.

  5. Absorbent product to absorb fluids. [for collection of human wastes

    NASA Technical Reports Server (NTRS)

    Dawn, F. S.; Correale, J. V. (Inventor)

    1982-01-01

    A multi-layer absorbent product for use in contact with the skin to absorb fluids is discussed. The product utilizes a water pervious facing layer for contacting the skin, overlayed by a first fibrous wicking layer, the wicking layer preferably being of the one-way variety in which fluid or liquid is moved away from the facing layer. The product further includes a first container section defined by inner and outer layer of a water pervious wicking material between which is disposed a first absorbent mass. A second container section defined by inner and outer layers between which is disposed a second absorbent mass and a liquid impermeable/gas permeable layer. Spacesuit applications are discussed.

  6. Incorporation of RAM techniques into simulation modeling

    SciTech Connect

    Nelson, S.C. Jr.; Haire, M.J.; Schryver, J.C.

    1995-07-01

    This work concludes that reliability, availability, and maintainability (RAM) analytical techniques can be incorporated into computer network simulation modeling to yield an important new analytical tool. This paper describes the incorporation of failure and repair information into network simulation to build a stochastic computer model represents the RAM Performance of two vehicles being developed for the US Army: The Advanced Field Artillery System (AFAS) and the Future Armored Resupply Vehicle (FARV). The AFAS is the US Army`s next generation self-propelled cannon artillery system. The FARV is a resupply vehicle for the AFAS. Both vehicles utilize automation technologies to improve the operational performance of the vehicles and reduce manpower. The network simulation model used in this work is task based. The model programmed in this application requirements a typical battle mission and the failures and repairs that occur during that battle. Each task that the FARV performs--upload, travel to the AFAS, refuel, perform tactical/survivability moves, return to logistic resupply, etc.--is modeled. Such a model reproduces a model reproduces operational phenomena (e.g., failures and repairs) that are likely to occur in actual performance. Simulation tasks are modeled as discrete chronological steps; after the completion of each task decisions are programmed that determine the next path to be followed. The result is a complex logic diagram or network. The network simulation model is developed within a hierarchy of vehicle systems, subsystems, and equipment and includes failure management subnetworks. RAM information and other performance measures are collected which have impact on design requirements. Design changes are evaluated through ``what if`` questions, sensitivity studies, and battle scenario changes.

  7. Optimizing Clinical Drug Product Performance: Applying Biopharmaceutics Risk Assessment Roadmap (BioRAM) and the BioRAM Scoring Grid.

    PubMed

    Dickinson, Paul A; Kesisoglou, Filippos; Flanagan, Talia; Martinez, Marilyn N; Mistry, Hitesh B; Crison, John R; Polli, James E; Cruañes, Maria T; Serajuddin, Abu T M; Müllertz, Anette; Cook, Jack A; Selen, Arzu

    2016-11-01

    The aim of Biopharmaceutics Risk Assessment Roadmap (BioRAM) and the BioRAM Scoring Grid is to facilitate optimization of clinical performance of drug products. BioRAM strategy relies on therapy-driven drug delivery and follows an integrated systems approach for formulating and addressing critical questions and decision-making (J Pharm Sci. 2014,103(11): 3777-97). In BioRAM, risk is defined as not achieving the intended in vivo drug product performance, and success is assessed by time to decision-making and action. Emphasis on time to decision-making and time to action highlights the value of well-formulated critical questions and well-designed and conducted integrated studies. This commentary describes and illustrates application of the BioRAM Scoring Grid, a companion to the BioRAM strategy, which guides implementation of such an integrated strategy encompassing 12 critical areas and 6 assessment stages. Application of the BioRAM Scoring Grid is illustrated using published literature. Organizational considerations for implementing BioRAM strategy, including the interactions, function, and skillsets of the BioRAM group members, are also reviewed. As a creative and innovative systems approach, we believe that BioRAM is going to have a broad-reaching impact, influencing drug development and leading to unique collaborations influencing how we learn, and leverage and share knowledge.

  8. Radiation-hardened nonvolatile MNOS RAM

    SciTech Connect

    Wrobel, T.F.; Dodson, W.H.; Hash, G.L.; Jones, R.V.; Nasby, R.D.; Olson, R.J.

    1983-01-01

    A radiation hardened nonvolatile MNOS RAM is being developed at Sandia National Laboratories. The memory organization is 128 x 8 bits and utilizes two p-channel MNOS transistors per memory cell. The peripheral circuitry is constructed with CMOS metal gate and is processed with standard Sandia rad-hard processing techniques. The devices have memory retention after a dose-rate exposure of 1E12 rad(Si)/s, are functional after total dose exposure of 1E6 rad(Si), and are dose-rate upset resistant to levels of 7E8 rad(Si)/s.

  9. A radiation hardened nonvolatile MNOS RAM

    NASA Astrophysics Data System (ADS)

    Wrobel, T. F.; Dodson, W. H.; Hash, G. L.; Jones, R. V.; Nasby, R. D.; Olson, R. J.

    1983-12-01

    A radiation hardened nonvolatile MNOS RAM (SA2998) is being developed at Sandia National Laboratories. The memory organization is 128 x 8 bits and utilizes two p-channel MNOS transistors per memory cell. The peripheral circuitry is constructed with CMOS metal gate and is processed with standard Sandia rad-hard processing techniques. The device requires +10 V and +25 V for operation. The devices have memory retention after a dose-rate exposure of 1E12 rad(Si)/s, are functional after total dose exposure of 1E6 rad(Si), and are dose-rate upset resistant to levels of 7E8 rad(Si)/s.

  10. Investigation of Superdetonative Ram Accelerator Drive Modes

    DTIC Science & Technology

    1989-12-15

    s) 31 atm IV 0.6 C2 H 4 -20 2 - 3.3 CO2 291 (m/s) 16 atm I IFig. 11 Velocity profile in thermally choked and superdetonative ram accelerator modes...Accelerator Concept," Ph.D. Dissertation, Department of Aeronautics \\& Astronautics, University of Washington, Oct. 1989. I 22. Stull, D.R. and Prophet ...Physical Gas Dynamics, Wiley, New 3 York, 1985, Chap. VII. 2. Stull, D.R. and Prophet , H., "JANAF Thermochemical Tables, 2nd. Ed.," NSRDS- I Report 37

  11. PADDLEFISH BUCCAL FLOW VELOCITY DURING RAM SUSPENSION FEEDING AND RAM VENTILATION

    PubMed

    Cech; Cheer

    1994-01-01

    A micro-thermistor probe was inserted into the buccal cavity of freely swimming paddlefish to measure flow velocity during ram ventilation, ram suspension feeding and prey processing. Swimming speed was measured from videotapes recorded simultaneously with the buccal flow velocity measurements. Both swimming velocity and buccal flow velocity were significantly higher during suspension feeding than during ram ventilation. As the paddlefish shifted from ventilation to feeding, buccal flow velocity increased to approximately 60 % of the swimming velocity. During prey processing, buccal flow velocity was significantly higher than the swimming velocity, indicating that prey processing involves the generation of suction. The Reynolds number (Re) for flow at the level of the paddlefish gill rakers during feeding is about 30, an order of magnitude lower than the Re calculated previously for pump suspension-feeding blackfish. These data, combined with data available from the literature, indicate that the gill rakers of ram suspension-feeding teleost fishes may operate at a substantially lower Re than the rakers of pump suspension feeders.

  12. Remotely variable multiple bore ram system and method

    SciTech Connect

    Carnahan, D.A.

    1989-05-02

    A ram assembly is described for use in a ram type blow out preventer, comprising: a thrust rod defining a longitudinal axis; a ram block body interconnected to the rod and defining a vertical cylindrical and normal to the longitudinal axis of the thrust rod; a ram shoe preselected from a plurality of parts thereof having different bores, the shoe having a load shoulder with a vertical cylindrical pin hole extending through the shoulder, and further having pipe faces and a seal disposed between the pipe faces and circumscribing the shoe; and a lock pin means having a collet hole disposed in one end for releasably interconnecting the ram shoe and the ram block when the lock pin means, the lock pin hole, and the pin hole are coaligned in vertical registry with the lock pin means disposed in the lock pin hole and the pin hole. The patent also describes a method using a running tool suspended from a drill hole string for changing from a first location a pair of ram shoes releasably interconnected by pins to respective rams of a ram type blow out preventer.

  13. Robotic Assisted Microsurgery - RAMS FY'97

    NASA Technical Reports Server (NTRS)

    1997-01-01

    JPL and Microdexterity Systems collaborated to develop new surgical capabilities. They developed a Robot Assisted Microsurgery (RAM) tool for surgeons to use for operating on the eye, ear, brain, and blood vessels with unprecedented dexterity. A surgeon can hold the surgical instrument with motions of 6 degrees of freedom with an accuracy of 25 microns in a 70 cu cm workspace. In 1996 a demonstration was performed to remove a microscopic particle from a simulated eyeball. In 1997, tests were performed at UCLA to compare telerobotics with mechanical operations. In 5 out of 7 tests, the RAM tool performed with a significant improvement of preciseness over mechanical operation. New design features include: (1) amplified forced feedback; (2) simultaneous slave robot instrumentation; (3) index control switch on master handle; and (4) tool control switches. Upgrades include: (1) increase in computational power; and (2) installation of hard disk memory storage device for independent operation and independent operation of forceps. In 1997 a final demonstration was performed using 2 telerobotics simultaneously in a microsurgery suture procedure to close a slit in a thin sheet of latex rubber which extended the capabilities of microsurgery procedures. After completing trials and demonstrations for the FDA the potential benefits for thousands of operations will be exposed.

  14. The rams horn in western history

    NASA Astrophysics Data System (ADS)

    Lubman, David

    2003-10-01

    The shofar or rams horn-one of the most ancient of surviving aerophones-may have originated with early Neolithic herders. The shofar is mentioned frequently and importantly in the Hebrew bible and in later biblical and post-biblical literature. Despite its long history, contemporary ritual uses, and profound symbolic significance to western religion, no documentation of shofar acoustical properties was found. Since ancient times, shepherds of many cultures have fashioned sound instruments from the horns of herd animals for practical and musical uses. Shepherd horns of other cultures exhibit an evolution of form and technology (e.g., the inclusion of finger holes). The shofar is unique in having retained its primitive form. It is suggested that after centuries of practical use, the shofar became emblematic of the shepherd culture. Ritual use then developed, which froze its form. A modern ritual rams horn played by an experienced blower was examined. This rather short horn was determined to have a source strength of 92 dB (A) at 1 m, a fundamental frequency near 420 Hz, and maximum power output between 1.2 and 1.8 kHz. Sample sounds and detection range estimates are provided.

  15. Ram Pressure Stripping of Galaxy JO201

    NASA Astrophysics Data System (ADS)

    Zhong, Greta; Tonnesen, Stephanie; Jaffé, Yara; Bellhouse, Callum; Bianca Poggianti

    2017-01-01

    Despite the discovery of the morphology-density relation more than 30 years ago, the process driving the evolution of spiral galaxies into S0s in clusters is still widely debated. Ram pressure stripping--the removal of a galaxy's interstellar medium by the pressure of the intracluster medium through which it orbits--may help explain galactic evolution and quenching in clusters. MUSE (Multi Unit Spectroscopic Explorer) observational data of galaxy JO201 in cluster Abell 85 reveal it to be a jellyfish galaxy--one with an H-alpha emitting gas tail on only one side. We model the possible orbits for this galaxy, constrained by the cluster mass profile, line of sight velocity, and projected distance from the cluster center. Using Enzo, an adaptive mesh refinement hydrodynamics code, we simulate effects of ram pressure on this galaxy for a range of possible orbits. We present comparisons of both the morphology and velocity structure of our simulated galaxy to the observations of H-alpha emission.

  16. Absorbent product and articles made therefrom

    NASA Technical Reports Server (NTRS)

    Dawn, F. S.; Correale, J. V. (Inventor)

    1982-01-01

    A multilayer absorbent product for use in contact with the skin to absorb fluids is described. The product has a water pervious facing layer for contacting the skin, and a first fibrous wicking layer overlaying the water pervious layer. A first container section is defined by inner and outer layers of a water pervious wicking material in between a first absorbent mass and a second container section defined by inner and outer layers of a water pervious wicking material between what is disposed a second absorbent mass, and a liquid impermeable/gas permeable layer overlaying the second fibrous wicking layer.

  17. Low temperature selective absorber research

    NASA Astrophysics Data System (ADS)

    Herzenberg, S. A.; Silberglitt, R.

    1982-04-01

    Research carried out since 1979 on selective absorbers is surveyed, with particular attention given to the low-temperature coatings seen as promising for flat plate and evacuated tube applications. The most thoroughly investigated absorber is black chrome, which is highly selective and is the most durable low-temperature absorber. It is believed that other materials, because of their low cost and lower content of strategic materials, may eventually supplant black chrome. Among these candidates are chemically converted black nickel; anodically oxidized nickel, zinc, and copper composites; and nickel or other low-cost multilayer coatings. In reviewing medium and high-temperature research, black chrome, multilayer coatings and black cobalt are seen as best medium-temperature candidates. For high temperatures, an Al2O3/Pt-Al203 multilayer composite or the zirconium diboride coating is preferred.

  18. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  19. Hydrodynamic ram modeling with the immersed boundary method

    SciTech Connect

    Lewis, M.W.; Kashiwa, B.A.; Rauenzahn, R.M.

    1998-03-01

    The authors have modeled a hydrodynamic ram experiment conducted at Wright-Patterson Air Force Base. In the experiment, a projectile traveling at 200 ft/sec impacted and penetrated a simulated airplane wing containing water. The structure consisted of composite panels with stiffeners and rivets, and an aluminum panel. The test included instrumentation to measure strains, accelerations, and pressures. The technique used for modeling this experiment was a multifluid compressible finite volume approach. The solid fields, namely the projectile and the plates which comprised the structure, were represented by a set of discrete, Lagrangian-frame, mass points. These mass points were followed throughout the computation. The contribution of the stress state at each mass point was applied on the grid to determine the stress divergence contribution to the equations of motion and resulting grid based accelerations. This approach has been defined as the immersed boundary method. The immersed boundary method allows the modeling of fluid-structure interaction problems involving material failure. The authors implemented a plate theory to allow the representation of each plate by a surface of mass points. This theory includes bending terms and transverse shear. Arbitrary constitutive models may be used for each plate. Here they describe the immersed boundary method as they have implemented. They then describe the plate theory and its implementation. They discuss the hydrodynamic ram experiment and describe how they modeled it. They compare computed results with test data. They finally conclude with a discussion of benefits and difficulties associated with this modeling approach and possible improvement to it.

  20. Digital Alloy Absorber for Photodetectors

    NASA Technical Reports Server (NTRS)

    Hill, Cory J. (Inventor); Ting, David Z. (Inventor); Gunapala, Sarath D. (Inventor)

    2016-01-01

    In order to increase the spectral response range and improve the mobility of the photo-generated carriers (e.g. in an nBn photodetector), a digital alloy absorber may be employed by embedding one (or fraction thereof) to several monolayers of a semiconductor material (insert layers) periodically into a different host semiconductor material of the absorber layer. The semiconductor material of the insert layer and the host semiconductor materials may have lattice constants that are substantially mismatched. For example, this may performed by periodically embedding monolayers of InSb into an InAsSb host as the absorption region to extend the cutoff wavelength of InAsSb photodetectors, such as InAsSb based nBn devices. The described technique allows for simultaneous control of alloy composition and net strain, which are both key parameters for the photodetector operation.

  1. Neutron absorbers and methods of forming at least a portion of a neutron absorber

    SciTech Connect

    Guillen, Donna P; Porter, Douglas L; Swank, W David; Erickson, Arnold W

    2014-12-02

    Methods of forming at least a portion of a neutron absorber include combining a first material and a second material to form a compound, reducing the compound into a plurality of particles, mixing the plurality of particles with a third material, and pressing the mixture of the plurality of particles and the third material. One or more components of neutron absorbers may be formed by such methods. Neutron absorbers may include a composite material including an intermetallic compound comprising hafnium aluminide and a matrix material comprising pure aluminum.

  2. Single Event Upset Behavior of CMOS Static RAM Cells

    NASA Technical Reports Server (NTRS)

    Lieneweg, Udo; Jeppson, Kjell O.; Buehler, Martin G.

    1993-01-01

    An improved state-space analysis of the CMOS static RAM cell is presented. Introducing theconcept of the dividing line, the critical charge for heavy-ion-induced upset of memory cells can becalculated considering symmetrical as well as asymmetrical capacitive loads. From the criticalcharge, the upset-rate per bit-day for static RAMs can be estimated.

  3. 29. NORTH SIDE OF SOUTH BANK OF HYDRAULIC RAMS, MIDDLE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. NORTH SIDE OF SOUTH BANK OF HYDRAULIC RAMS, MIDDLE LEVEL OF STAGE, LOOKING SOUTHEAST. RAMS HAVE BEEN FIXED IN POSITION AT STAGE LEVEL AND NEW MIDDLE LEVEL FLOOR CONSTRUCTED BELOW. - Auditorium Building, 430 South Michigan Avenue, Chicago, Cook County, IL

  4. Space station synergetic RAM-logistics analysis

    NASA Technical Reports Server (NTRS)

    Dejulio, Edmund T.; Leet, Joel H.

    1988-01-01

    NASA's Space Station Maintenance Planning and Analysis (MP&A) Study is a step in the overall Space Station Program to define optimum approaches for on-orbit maintenance planning and logistics support. The approach used in the MP&A study and the analysis process used are presented. Emphasis is on maintenance activities and processes that can be accomplished on orbit within the known design and support constraints of the Space Station. From these analyses, recommendations for maintainability/maintenance requirements are established. The ultimate goal of the study is to reduce on-orbit maintenance requirements to a practical and safe minimum, thereby conserving crew time for productive endeavors. The reliability, availability, and maintainability (RAM) and operations performance evaluation models used were assembled and developed as part of the MP&A study and are described. A representative space station system design is presented to illustrate the analysis process.

  5. THz-metamaterial absorbers

    NASA Astrophysics Data System (ADS)

    Tuong Pham, Van; Park, J. W.; Vu, Dinh Lam; Zheng, H. Y.; Rhee, J. Y.; Kim, K. W.; Lee, Y. P.

    2013-03-01

    An ultrabroad-band metamaterial absorber was investigated in mid-IR regime based on a similar model in previous work. The high absorption of metamaterial was obtained in a band of 8-11.7 THz with energy loss distributed in SiO2, which is appropriate potentially for solar-cell applications. A perfect absorption peak was provided by using a sandwich structure with periodical anti-dot pattern in the IR region, getting closed to visible-band metamaterials. The dimensional parameters were examined for the corresponding fabrication. Invited talk at the 6th International Workshop on Advanced Materials Science and Nanotechnology, 30 October-2 November, 2012, Ha Long, Vietnam.

  6. Absorbencies of six different rodent beddings: commercially advertised absorbencies are potentially misleading.

    PubMed

    Burn, C C; Mason, G J

    2005-01-01

    Moisture absorbency is one of the most important characteristics of rodent beddings for controlling bacterial growth and ammonia production. However, bedding manufacturers rarely provide information on the absorbencies of available materials, and even when they do, absorption values are usually expressed per unit mass of bedding. Since beddings are usually placed into cages to reach a required depth rather than a particular mass, their volumetric absorbencies are far more relevant. This study therefore compared the saline absorbencies of sawdust, aspen woodchips, two virgin loose pulp beddings (Alpha-Dri and Omega-Dri), reclaimed wood pulp (Tek-Fresh), and corncob, calculated both by volume and by mass. Absorbency per unit volume correlated positively with bedding density, while absorbency per unit mass correlated negatively. Therefore, the relative absorbencies of the beddings were almost completely reversed depending on how absorbency was calculated. By volume, corncob was the most absorbent bedding, absorbing about twice as much saline as Tek-Fresh, the least absorbent bedding. Conversely, when calculated by mass, Tek-Fresh appeared to absorb almost three times as much saline as the corncob. Thus, in practical terms the most absorbent bedding here was corncob, followed by the loose pulp beddings; and this is generally supported by their relatively low ammonia production as seen in previous studies. Many factors other than absorbency determine whether a material is suitable as a rodent bedding, and they are briefly mentioned here. However, manufacturers should provide details of bedding absorbencies in terms of volume, in order to help predict the relative absorbencies of the beddings in practical situations.

  7. A simple parameterization of aerosol emissions in RAMS

    NASA Astrophysics Data System (ADS)

    Letcher, Theodore

    Throughout the past decade, a high degree of attention has been focused on determining the microphysical impact of anthropogenically enhanced concentrations of Cloud Condensation Nuclei (CCN) on orographic snowfall in the mountains of the western United States. This area has garnered a lot of attention due to the implications this effect may have on local water resource distribution within the Region. Recent advances in computing power and the development of highly advanced microphysical schemes within numerical models have provided an estimation of the sensitivity that orographic snowfall has to changes in atmospheric CCN concentrations. However, what is still lacking is a coupling between these advanced microphysical schemes and a real-world representation of CCN sources. Previously, an attempt to representation the heterogeneous evolution of aerosol was made by coupling three-dimensional aerosol output from the WRF Chemistry model to the Colorado State University (CSU) Regional Atmospheric Modeling System (RAMS) (Ward et al. 2011). The biggest problem associated with this scheme was the computational expense. In fact, the computational expense associated with this scheme was so high, that it was prohibitive for simulations with fine enough resolution to accurately represent microphysical processes. To improve upon this method, a new parameterization for aerosol emission was developed in such a way that it was fully contained within RAMS. Several assumptions went into generating a computationally efficient aerosol emissions parameterization in RAMS. The most notable assumption was the decision to neglect the chemical processes in formed in the formation of Secondary Aerosol (SA), and instead treat SA as primary aerosol via short-term WRF-CHEM simulations. While, SA makes up a substantial portion of the total aerosol burden (much of which is made up of organic material), the representation of this process is highly complex and highly expensive within a numerical

  8. Testicular pathology, gonadal and epididymal sperm reserves of Yankasa rams infected with experimental Trypanosoma brucei brucei and Trypanosoma evansi

    PubMed Central

    Wada, Yunusa A.; Oniye, Sonnie J.; Rekwot, Peter I.; Okubanjo, Oluyinka O.

    2016-01-01

    Aim: The study was conducted to evaluate the pathological effects of trypanosomosis on the testes, gonadal, and epididymal sperm reserves of Yankasa rams for 98 days. Materials and Methods: A total of 16 Yankasa rams, aged between 24 and 30 months and weighed between 22 and 25 kg, were acclimatized for a period of 2-months in a clean fly proof house and were adequately fed and given water ad-libitum. Of the 16 rams, 12 that were clinically fit for the experiment at the end of the acclimatization period were randomly divided into four groups: Groups I, II, III, and IV, each having 3 rams. Groups I and II were each challenged singly with experimental Trypanosoma brucei brucei (Federer strain) and Trypanosoma evansi (Sokoto strain), respectively, while Group III was challenged with mixed T. brucei brucei and T. evansi parasites (50% of each species in the infective inoculum) and Group IV was left as an uninfected control. Each infected ram received 2 mL of the infected blood containing 2×106 trypomastigotes via the jugular vein, while the control group received 2 mL each, normal saline. Results: All the infected rams developed clinical signs typical of trypanosomosis at varying pre-patent periods. The gross lesions observed in the infected rams in Group II were moderate and more severe in those of Groups I and III. Histological sections of the testes of infected rams (Groups I, II, and III) showed moderate (T. evansi-infected group) to severe (mixed and T. brucei brucei-infected groups) testicular degenerations with reduction in number of spermatogenic cell layers, degenerated seminiferous tubules, congested interlobular spaces, loss of tissue architecture with significant (p<0.01) depletion, and loss of gonadal and epididymal sperm reserves in Groups I and III in comparison to Group II and the control Group IV. No observable clinical signs and histopathological lesions were found in those rams of the control Group IV. Conclusion: The study concluded that

  9. Ram-Jet off Design Performances

    NASA Astrophysics Data System (ADS)

    Andriani, Roberto; Ghezzi, Umberto

    2002-01-01

    In this work it is intended to study the off-design performances of a ram jet engine. To this purpouse it has been analyzed in a first time the behaviour of an ideal engine, that means to not consider the losses in the various components, or, under a thermodynamic point of view, to consider the fluid transformation through the air intake and exhaust nozzle, remembering that in a ram jet there are not rotating components as compressor and turbine, isentropic. Referring to the ram-jet scheme of fig.1. we can say, neglecting the fuel introduced, that the air mass flow rate throughout the engine is constant. If we consider the two control sections 4 and 8, respectively the throat section of the converging-diverging supersonic inlet and the throat section of the discharge nozzle, the condition of constant mass flow leads to the relation: m4 =f (M 4 ) m8 = m 4 = m8 We can imaging that the throat section # 4 is always choked for any value of the flight Mach number M0. This means that the throat section 4 is adjusted at any value of M0 so that the flow Mach number in 4 is equal to unity. In this it follows: R. Andriani, U. Ghezzi1 Since in an ideal case T t8 The relation [1] allows to determine the T8 temperature, that represent the maximum cycle temperature, for different operating conditions, as flight Mach number and altitude. We then have two cases: the first is A8 (nozzle throat section) fixed, and the second is A8 variable. In the first case the maximum temperature T8 is univocally determined by the operating condition. In the second case A8 can be varied so to maintain T8 at a chosen value. The graphic of fig.2 shows the first case. In particular it has been considered as design point an altitude of 15000 meters and a flight Mach number equal to 2. In this condition it has been evaluated the section A8 for unity mass flow rate. At the same altitude, varying the flight Mach number, with the section A4 always choked, the graphic shows the variation of the maximum

  10. Method for absorbing an ion from a fluid

    DOEpatents

    Gao, Huizhen; Wang, Yifeng; Bryan, Charles R.

    2007-07-03

    A method for absorbing an ion from a fluid by using dispersing an organic acid into an anion surfactant solution, mixing in a divalent-metal containing compound and a trivalent-metal containing compound and calcining the resulting solid layered double hydroxide product to form an absorbent material and then contacting the absorbent material with an aqueous solution of cations or anions to be absorbed.

  11. 26. EASTERNMOST HYDRAULIC RAM IN CENTER RANK (STILL OPERABLE), LOWER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. EASTERNMOST HYDRAULIC RAM IN CENTER RANK (STILL OPERABLE), LOWER LEVEL OF STAGE, LOOKING SOUTH. THE CENTER BANK OF RAMS MOVED SMALL SECTIONS OF STAGE IN THE CENTER OF EACH LARGE MOVABLE SECTION. THE WEST EDGE OF THIS SECTION HAS BEEN EXTENDED TO THE WEST EDGE OF THE LARGE SECTION WHICH ORIGINALLY SURROUNDED IT. THE SOUTH RAM FOR THE LARGE SECTION IS VISIBLE IN THE BACKGROUND. THE SMALL MOVABLE SECTIONS COULD NOT TILT BUT COULD BE LOWERED TO THE LOWER LEVEL OF THE STAGE WITH HINGED PANELS UNDER EACH LARGE SECTION FILLING THE VOID. - Auditorium Building, 430 South Michigan Avenue, Chicago, Cook County, IL

  12. STS-9 Shuttle grow - Ram angle effect and absolute intensities

    NASA Technical Reports Server (NTRS)

    Swenson, G. R.; Mende, S. B.; Clifton, K. S.

    1986-01-01

    Visible imagery from Space Shuttle mission STS-9 (Spacelab 1) has been analyzed for the ram angle effect and the absolute intensity of glow. The data are compared with earlier measurements and the anomalous high intensities at large ram angles are confirmed. Absolute intensities of the ram glow on the shuttle tile, at 6563 A, are observed to be about 20 times more intense than those measured on the AE-E spacecraft. Implications of these observations for an existing theory of glow involving NO2 are presented.

  13. 117. Stage mezzanine level floor structure. North rams, facing south. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    117. Stage mezzanine level floor structure. North rams, facing south. The left hand ram is the same one visible from above in IL-1007-114. A hinged slot in the mezzanine floor corresponding to the slot in the stage floor above is visible in the center of the photo (also visible from below in IL-1007-119). To the right, the top of one of the lowered, smaller, downstage rams (type C) is visible. - Auditorium Building, 430 South Michigan Avenue, Chicago, Cook County, IL

  14. Research and applications modules /RAM/ - A family of payload carriers.

    NASA Technical Reports Server (NTRS)

    Withee, W. W.

    1973-01-01

    RAM is a family of payload carriers, pressurized, unpressurized and pressurizable, that operate in conjunction with the Space Shuttle and associated space systems to provide modular facilities to conduct manned or man-tended research in low earth orbit. RAM family elements are discussed as the next step in evolution from the Sortie Laboratory required to provide a significant increase in experimental capability, flexibility, and economy necessary to meet the needs of an expanding program of research and applications activities. Examples of RAM missions and operations as sortie mission laboratories and observatories, and free-flying man-tended observatories are illustrated.

  15. New River Geothermal Exploration (Ram Power Inc.)

    DOE Data Explorer

    Miller, Clay

    2013-11-15

    The New River Geothermal Exploration (DOE Award No. EE0002843) is located approximately 25km south of the Salton Sea, near town of Brawley in Imperial County and approximately 150km east of San Diego, California. A total of 182 MT Logger sites were completed covering the two separate Mesquite and New River grids. The data was collected over a frequency range of 320Hz to 0.001Hz with variable site spacing. A number of different inversion algorithms in 1D, 2D and 3D were used to produce resistivity-depth profiles and maps of subsurface resistivity variations over the survey area. For 2D inversions, a total of eighteen lines were constructed in east-west and north-south orientations crossing the entire survey area. For MT 3D inversion, the New River property was divided in two sub-grids, Mesquite and New River areas. The report comprises of two parts. For the first part, inversions and geophysical interpretation results are presented with some recommendations of the potential targets for future follow up on the property. The second part of the report describes logistics of the survey, survey parameters, methodology and the survey results (data) in digital documents. The report reviews a Spartan MT survey carried out by Quantec Geoscience Limited over the New River Project in California, USA on behalf of Ram Power Inc. Data was acquired over a period of 29 days from 2010/06/26 to 2010/07/24.

  16. Ram pressure stripping in the Virgo Cluster

    NASA Astrophysics Data System (ADS)

    Verdugo, C.; Combes, F.; Dasyra, K.; Salomé, P.; Braine, J.

    2015-10-01

    Gas can be violently stripped from their galaxy disks in rich clusters, and be dispersed over 100 kpc-scale tails or plumes. Young stars have been observed in these tails, suggesting they are formed in situ. This will contribute to the intracluster light, in addition to tidal stripping of old stars. We want to quantify the efficiency of intracluster star formation. We present CO(1-0) and CO(2-1) observations, made with the IRAM-30 m telescope, towards the ram-pressure stripped tail northeast of NGC 4388 in Virgo. We selected HII regions found all along the tails, together with dust patches, as observing targets. We detect molecular gas in 4 positions along the tail, with masses between 7 × 105 to 2 × 106M⊙. Given the large distance from the NGC 4388 galaxy, the molecular clouds must have formed in situ, from the HI gas plume. We compute the relation between surface densities of star formation and molecular gas in these regions, and find that the star formation has very low efficiency. The corresponding depletion time of the molecular gas can be up to 500 Gyr and more. Since this value exceeds a by far Hubble time, this gas will not be converted into stars, and will stay in a gaseous phase to join the intracluster medium.

  17. Energy absorber uses expanded coiled tube

    NASA Technical Reports Server (NTRS)

    Johnson, E. F.

    1972-01-01

    Mechanical shock mitigating device, based on working material to its failure point, absorbs mechanical energy by bending or twisting tubing. It functions under axial or tangential loading, has no rebound, is area independent, and is easy and inexpensive to build.

  18. Externally tuned vibration absorber

    DOEpatents

    Vincent, Ronald J.

    1987-09-22

    A vibration absorber unit or units are mounted on the exterior housing of a hydraulic drive system of the type that is powered from a pressure wave generated, e.g., by a Stirling engine. The hydraulic drive system employs a piston which is hydraulically driven to oscillate in a direction perpendicular to the axis of the hydraulic drive system. The vibration absorbers each include a spring or other resilient member having one side affixed to the housing and another side to which an absorber mass is affixed. In a preferred embodiment, a pair of vibration absorbers is employed, each absorber being formed of a pair of leaf spring assemblies, between which the absorber mass is suspended.

  19. Shock absorber control system

    SciTech Connect

    Nakano, Y.; Ohira, M.; Ushida, M.; Miyagawa, T.; Shimodaira, T.

    1987-01-13

    A shock absorber control system is described for controlling a dampening force of a shock absorber of a vehicle comprising: setting means for setting a desired dampening force changeable within a predetermined range; drive means for driving the shock absorber to change the dampening force of the shock absorber linearly; control means for controlling the drive means in accordance with the desired dampening force when the setting of the desired dampening force has been changed; detecting means for detecting an actual dampening force of the shock absorber; and correcting means for correcting the dampening force of the shock absorber by controlling the drive means in accordance with a difference between the desired dampening force and the detected actual dampening force.

  20. CPCs with segmented absorbers

    SciTech Connect

    Keita, M.; Robertson, H.S. )

    1991-01-01

    One of the most promising means of improving the performance of solar thermal collectors is to reduce the energy lost by the hot absorber. One way to do this, not currently part of the technology, is to recognize that since the absorber is usually not irradiated uniformly, it is therefore possible to construct an absorber of thermally isolated segments, circulate the fluid in sequence from low to high irradiance segments, and reduce loss by improving effective concentration. This procedure works even for ideal concentrators, without violating Winston's theorem. Two equivalent CPC collectors with single and segmented absorber were constructed and compared under actual operating conditions. The results showed that the daily thermal efficiency of the collector with segmented absorber is higher (about 13%) than that of the collector with nonsegmented absorber.

  1. Methods for absorbing neutrons

    DOEpatents

    Guillen, Donna P [Idaho Falls, ID; Longhurst, Glen R [Idaho Falls, ID; Porter, Douglas L [Idaho Falls, ID; Parry, James R [Idaho Falls, ID

    2012-07-24

    A conduction cooled neutron absorber may include a metal matrix composite that comprises a metal having a thermal neutron cross-section of at least about 50 barns and a metal having a thermal conductivity of at least about 1 W/cmK. Apparatus for providing a neutron flux having a high fast-to-thermal neutron ratio may include a source of neutrons that produces fast neutrons and thermal neutrons. A neutron absorber positioned adjacent the neutron source absorbs at least some of the thermal neutrons so that a region adjacent the neutron absorber has a fast-to-thermal neutron ratio of at least about 15. A coolant in thermal contact with the neutron absorber removes heat from the neutron absorber.

  2. 30. DETAIL OF TOP OF TYPICAL HYDRAULIC RAM IN SOUTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. DETAIL OF TOP OF TYPICAL HYDRAULIC RAM IN SOUTH RANK SHOWING ROLLER CONNECTIONS FOR STAGE FLOORS, MIDDLE LEVEL OF STAGE, LOOKING SOUTH. - Auditorium Building, 430 South Michigan Avenue, Chicago, Cook County, IL

  3. RAM simulation model for SPH/RSV systems

    SciTech Connect

    Schryver, J.C.; Primm, A.H.; Nelson, S.C.

    1995-12-31

    The US Army`s Project Manager, Crusader is sponsoring the development of technologies that apply to the Self-Propelled Howitzer (SPH), formerly the Advanced Field Artillery System (AFAS), and Resupply Vehicle (RSV), formerly the Future Armored Resupply Vehicle (FARV), weapon system. Oak Ridge National Laboratory (ORNL) is currently performing developmental work in support of the SPH/PSV Crusader system. Supportive analyses of reliability, availability, and maintainability (RAM) aspects were also performed for the SPH/RSV effort. During FY 1994 and FY 1995 OPNL conducted a feasibility study to demonstrate the application of simulation modeling for RAM analysis of the Crusader system. Following completion of the feasibility study, a full-scale RAM simulation model of the Crusader system was developed for both the SPH and PSV. This report provides documentation for the simulation model as well as instructions in the proper execution and utilization of the model for the conduct of RAM analyses.

  4. DETAIL OF CORNICE MOULDING WITH RAM'S HEAD MOTIF. EIGHT SHADES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF CORNICE MOULDING WITH RAM'S HEAD MOTIF. EIGHT SHADES OF GOLD LEAF AND BURNISHED GOLD LEAF WERE USED FOR THE INTERIOR FINISHES. - Anaconda Historic District, Washoe Theater, 305 Main Street, Anaconda, Deer Lodge County, MT

  5. 10. DETAIL OF CORNICE MOULDING WITH RAM'S HEAD MOTIF. EIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. DETAIL OF CORNICE MOULDING WITH RAM'S HEAD MOTIF. EIGHT SHADES OF GOLD LEAF AND BURNISHED GOLD LEAF WERE USED FOR THE INTERIOR FINISHES - Anaconda Historic District, Washoe Theater, 305 Main Street, Anaconda, Deer Lodge County, MT

  6. Truck transport of RAM: Risk effects of avoiding metropolitan areas

    SciTech Connect

    Mills, G.S.; Neuhauser, K.S.

    1997-11-01

    In the transport of radioactive material (RAM), e.g., spent nuclear fuel (SNF), stakeholders are generally most concerned about risks in high population density areas along transportation routes because of the perceived high consequences of potential accidents. The most significant portions of a transcontinental route and an alternative examined previously were evaluated again using population density data derived from US Census Block data. This method of characterizing population that adjoins route segments offers improved resolution of population density variations, especially in high population density areas along typical transport routes. Calculated incident free doses and accident dose risks for these routes, and the rural, suburban and urban segments are presented for comparison of their relative magnitudes. The results indicate that modification of this route to avoid major metropolitan areas through use of non-Interstate highways increases total risk yet does not eliminate a relatively small urban component of the accident dose risk. This conclusion is not altered by improved resolution of route segments adjoining high density populations.

  7. 33 CFR 147.811 - Ram-Powell Tension Leg Platform safety zone.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Ram-Powell Tension Leg Platform... SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.811 Ram-Powell Tension Leg Platform safety zone. (a) Description. The Ram-Powell Tension Leg Platform (Ram-Powell TLP) is located...

  8. 33 CFR 147.811 - Ram-Powell Tension Leg Platform safety zone.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Ram-Powell Tension Leg Platform... SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.811 Ram-Powell Tension Leg Platform safety zone. (a) Description. The Ram-Powell Tension Leg Platform (Ram-Powell TLP) is located...

  9. 33 CFR 147.811 - Ram-Powell Tension Leg Platform safety zone.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Ram-Powell Tension Leg Platform... SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.811 Ram-Powell Tension Leg Platform safety zone. (a) Description. The Ram-Powell Tension Leg Platform (Ram-Powell TLP) is located...

  10. 33 CFR 147.811 - Ram-Powell Tension Leg Platform safety zone.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Ram-Powell Tension Leg Platform... SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.811 Ram-Powell Tension Leg Platform safety zone. (a) Description. The Ram-Powell Tension Leg Platform (Ram-Powell TLP) is located...

  11. 33 CFR 147.811 - Ram-Powell Tension Leg Platform safety zone.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Ram-Powell Tension Leg Platform... SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.811 Ram-Powell Tension Leg Platform safety zone. (a) Description. The Ram-Powell Tension Leg Platform (Ram-Powell TLP) is located...

  12. Why the Survivability Onion Should Include Reliability, Availability and Maintainability (RAM)

    DTIC Science & Technology

    2013-09-01

    NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA JOINT APPLIED PROJECT WHY THE SURVIVABILITY ONION SHOULD INCLUDE RELIABILITY...SURVIVABILITY ONION SHOULD INCLUDE RELIABILITY, AVAILABILITY, AND MAINTAINABILITY (RAM): THE INTERRELATIONSHIP BETWEEN SURVIVABILITY AND RAM 5. FUNDING...This analysis uses an Active Protection System (APS) to show that, when RAM is included in the Survivability Onion ; both Survivability and RAM

  13. Multispectral metamaterial absorber.

    PubMed

    Grant, J; McCrindle, I J H; Li, C; Cumming, D R S

    2014-03-01

    We present the simulation, implementation, and measurement of a multispectral metamaterial absorber (MSMMA) and show that we can realize a simple absorber structure that operates in the mid-IR and terahertz (THz) bands. By embedding an IR metamaterial absorber layer into a standard THz metamaterial absorber stack, a narrowband resonance is induced at a wavelength of 4.3 μm. This resonance is in addition to the THz metamaterial absorption resonance at 109 μm (2.75 THz). We demonstrate the inherent scalability and versatility of our MSMMA by describing a second device whereby the MM-induced IR absorption peak frequency is tuned by varying the IR absorber geometry. Such a MSMMA could be coupled with a suitable sensor and formed into a focal plane array, enabling multispectral imaging.

  14. Internal absorber solar collector

    DOEpatents

    Sletten, Carlyle J.; Herskovitz, Sheldon B.; Holt, F. S.; Sletten, E. J.

    1981-01-01

    Thin solar collecting panels are described made from arrays of small rod collectors consisting of a refracting dielectric rod lens with an absorber imbedded within it and a reflecting mirror coated on the back side of the dielectric rod. Non-tracking collector panels on vertical walls or roof tops receive approximately 90% of solar radiation within an acceptance zone 60.degree. in elevation angle by 120.degree. or more in the azimuth sectors with a collector concentration ratio of approximately 3.0. Miniaturized construction of the circular dielectric rods with internal absorbers reduces the weight per area of glass, plastic and metal used in the collector panels. No external parts or insulation are needed as heat losses are low due to partial vacuum or low conductivity gas surrounding heated portions of the collector. The miniature internal absorbers are generally made of solid copper with black selective surface and the collected solar heat is extracted at the collector ends by thermal conductivity along the absorber rods. Heat is removed from end fittings by use of liquid circulants. Several alternate constructions are provided for simplifying collector panel fabrication and for preventing the thermal expansion and contraction of the heated absorber or circulant tubes from damaging vacuum seals. In a modified version of the internal absorber collector, oil with temperature dependent viscosity is pumped through a segmented absorber which is now composed of closely spaced insulated metal tubes. In this way the circulant is automatically diverted through heated portions of the absorber giving higher collector concentration ratios than theoretically possible for an unsegmented absorber.

  15. Origin of the OFF state variability in ReRAM cells

    NASA Astrophysics Data System (ADS)

    Salaoru, Iulia; Khiat, Ali; Li, Qingjiang; Berdan, Radu; Papavassiliou, Christos; Prodromakis, Themistoklis

    2014-04-01

    This work exploits the switching dynamics of nanoscale resistive random access memory (ReRAM) cells with particular emphasis on the origin of the observed variability when cells are consecutively cycled/programmed at distinct memory states. It is demonstrated that this variance is a common feature of all ReRAM elements and is ascribed to the formation and rupture of conductive filaments that expand across the active core, independently of the material employed as the active switching core, the causal physical switching mechanism, the switching mode (bipolar/unipolar) or even the unit cells' dimensions. Our hypothesis is supported through both experimental and theoretical studies on TiO2 and In2O3 : SnO2 (ITO) based ReRAM cells programmed at three distinct resistive states. Our prototypes employed TiO2 or ITO active cores over 5 × 5 µm2 and 100 × 100 µm2 cell areas, with all tested devices demonstrating both unipolar and bipolar switching modalities. In the case of TiO2-based cells, the underlying switching mechanism is based on the non-uniform displacement of ionic species that foster the formation of conductive filaments. On the other hand, the resistive switching observed in the ITO-based devices is considered to be due to a phase change mechanism. The selected experimental parameters allowed us to demonstrate that the observed programming variance is a common feature of all ReRAM devices, proving that its origin is dependent upon randomly oriented local disorders within the active core that have a substantial impact on the overall state variance, particularly for high-resistive states.

  16. Lipid-absorbing Polymers

    NASA Technical Reports Server (NTRS)

    Marsh, H. E., Jr.; Wallace, C. J.

    1973-01-01

    The removal of bile acids and cholesterol by polymeric absorption is discussed in terms of micelle-polymer interaction. The results obtained with a polymer composed of 75 parts PEO and 25 parts PB plus curing ingredients show an absorption of 305 to 309%, based on original polymer weight. Particle size effects on absorption rate are analyzed. It is concluded that crosslinked polyethylene oxide polymers will absorb water, crosslinked polybutadiene polymers will absorb lipids; neither polymer will absorb appreciable amounts of lipids from micellar solutions of lipids in water.

  17. An ultrathin dual-band metamaterial absorber

    NASA Astrophysics Data System (ADS)

    Zhang, Yong; Duan, Junping; Zhang, Wendong; Wang, Wanjun; Zhang, Binzhen

    2016-10-01

    The design and preparation of an ultrathin dual-band metamaterial absorber whose resonant frequency located at radar wave (20 GHz-60 GHz) is presented in this paper. The absorber is composed of a 2-D periodic sandwich featured with two concentric annuluses. The influence on the absorber's performance produced by resonant cell's structure size and material parameters was numerically simulated and analyzed based on the standard full wave finite integration technology in CST. Laser ablation process was adopted to prepare the designed absorber on epoxy resin board coated with on double plane of copper with a thickness that is 1/30 and 1/50 of the resonant wavelength at a resonant frequency of 30.51 GHz and 48.15 GHz. The full width at half maximum (FWHM) reached 2.2 GHz and 2.35 GHz and the peak of the absorptance reached 99.977%. The ultrathin absorber is nearly omnidirectional for all polarizations. The test results of prepared sample testify the designed absorber's excellent absorbing performance forcefully. The absorber expands inspirations of radar stealth in military domain due to its flexible design, cost-effective and other outstanding properties.

  18. Perovskite semiconductor La(Ni0.75W0.25)O3 nanoparticles for visible-light-absorbing photocatalytic material

    NASA Astrophysics Data System (ADS)

    Xu, Lei; Xie, Hongde; Pu, Yinfu; Huang, Yanlin; Qin, Lin; Seo, Hyo Jin

    2017-01-01

    La(Ni0.75W0.25)O3 perovskite oxide was prepared via the sol-gel Pechini route. The pure crystalline phase was verified via X-ray diffraction measurements and Rietveld structure refinements. Some measurements were applied to characterize the surface of the nanoparticles such as transmission electron microscopy, scanning electron microscope, energy-dispersive X-ray spectroscopy, specific surface area, and X-ray photo-electron spectroscopy measurements. The optical measurement confirmed that this perovskite oxide can absorb the visible light presenting low band energy of 2.41 eV. The d-d allowed transitions in Ni2+-O octahedral have great contributions to the narrow band-gap. The Ni2+-containing perovskite was applied as a photocatalyst showing the desirable photodegradation ability for methylene blue solutions under the excitation of visible-light. The photocatalysis activities were discussed in the relationship with its special perovskite-type structure such as the NiO6 color centers and multivalent cation ions etc.

  19. Container and method for absorbing and reducing hydrogen concentration

    DOEpatents

    Wicks, George G.; Lee, Myung W.; Heung, Leung K.

    2001-01-01

    A method for absorbing hydrogen from an enclosed environment comprising providing a vessel; providing a hydrogen storage composition in communication with a vessel, the hydrogen storage composition further comprising a matrix defining a pore size which permits the passage of hydrogen gas while blocking the passage of gaseous poisons; placing a material within the vessel, the material evolving hydrogen gas; sealing the vessel; and absorbing the hydrogen gas released into the vessel by the hydrogen storage composition. A container for absorbing evolved hydrogen gas comprising: a vessel having an interior and adapted for receiving materials which release hydrogen gas; a hydrogen absorbing composition in communication with the interior, the composition defining a matrix surrounding a hydrogen absorber, the matrix permitting the passage of hydrogen gas while excluding gaseous poisons; wherein, when the vessel is sealed, hydrogen gas, which is released into the vessel interior, is absorbed by the hydrogen absorbing composition.

  20. Composite neutron absorbing coatings for nuclear criticality control

    DOEpatents

    Wright, Richard N.; Swank, W. David; Mizia, Ronald E.

    2005-07-19

    Thermal neutron absorbing composite coating materials and methods of applying such coating materials to spent nuclear fuel storage systems are provided. A composite neutron absorbing coating applied to a substrate surface includes a neutron absorbing layer overlying at least a portion of the substrate surface, and a corrosion resistant top coat layer overlying at least a portion of the neutron absorbing layer. An optional bond coat layer can be formed on the substrate surface prior to forming the neutron absorbing layer. The neutron absorbing layer can include a neutron absorbing material, such as gadolinium oxide or gadolinium phosphate, dispersed in a metal alloy matrix. The coating layers may be formed by a plasma spray process or a high velocity oxygen fuel process.

  1. Operational advances in ring current modeling using RAM-SCB

    SciTech Connect

    Welling, Daniel T; Jordanova, Vania K; Zaharia, Sorin G; Morley, Steven K

    2010-12-03

    The Ring current Atmosphere interaction Model with Self-Consistently calculated 3D Magnetic field (RAM-SCB) combines a kinetic model of the ring current with a force-balanced model of the magnetospheric magnetic field to create an inner magnetospheric model that is magnetically self consistent. RAM-SCB produces a wealth of outputs that are valuable to space weather applications. For example, the anisotropic particle distribution of the KeV-energy population calculated by the code is key for predicting surface charging on spacecraft. Furthermore, radiation belt codes stand to benefit substantially from RAM-SCB calculated magnetic field values and plasma wave growth rates - both important for determining the evolution of relativistic electron populations. RAM-SCB is undergoing development to bring these benefits to the space weather community. Data-model validation efforts are underway to assess the performance of the system. 'Virtual Satellite' capability has been added to yield satellite-specific particle distribution and magnetic field output. The code's outer boundary is being expanded to 10 Earth Radii to encompass previously neglected geosynchronous orbits and allow the code to be driven completely by either empirical or first-principles based inputs. These advances are culminating towards a new, real-time version of the code, rtRAM-SCB, that can monitor the inner magnetosphere conditions on both a global and spacecraft-specific level. This paper summarizes these new features as well as the benefits they provide the space weather community.

  2. "Smart" Electromechanical Shock Absorber

    NASA Technical Reports Server (NTRS)

    Stokes, Lebarian; Glenn, Dean C.; Carroll, Monty B.

    1989-01-01

    Shock-absorbing apparatus includes electromechanical actuator and digital feedback control circuitry rather than springs and hydraulic damping as in conventional shock absorbers. Device not subject to leakage and requires little or no maintenance. Attenuator parameters adjusted in response to sensory feedback and predictive algorithms to obtain desired damping characteristic. Device programmed to decelerate slowly approaching vehicle or other large object according to prescribed damping characteristic.

  3. Porous absorber for solar air heaters

    SciTech Connect

    Finch, J.A.

    1980-09-10

    A general discussion of the factors affecting solar collector performance is presented. Bench scale tests done to try to determine the heat transfer characteristics of various screen materials are explained. The design, performance, and evaluation of a crude collector with a simple screen stack absorber is treated. The more sophisticated absorber concept, and its first experimental approximation is examined. A short summary of future plans for the collector concept is included. (MHR)

  4. Radio-Absorbing Nanocoatings on Corrugated Surfaces

    NASA Astrophysics Data System (ADS)

    Antipov, V. B.; Potekaev, A. I.; Vorozhtsov, A. B.; Melentyev, S. V.; Tsyganok, Yu. I.

    2016-12-01

    The feasibility of producing protective radio-absorbing shielding materials on the basis of differently shaped surfaces with nanostructured coatings is investigated. Combinations of special nanostructured materials and technical solutions for the shape of the absorbing surface were tested, in order to create efficient nanocoatings. It is shown that the coatings of interest that meet the requirements of low reflection and high attenuation of transmitted radiation combined with low coating thickness can be developed, using corrugated surfaces. Corrugated chicken egg-packing cell samples with nanostructured carbon coatings were examined and found to allow for effective shielding of electromagnetic radiation and to exhibit minimum reflection coefficients as compared to construction materials.

  5. Application of RAM to Facility/Laboratory Design

    SciTech Connect

    Mohammadi, K

    2008-04-14

    Reliability, Availability, and Maintainability (RAM) studies are extensively used for mission critical systems (e.g., weapons systems) to predict the RAM parameters at the preliminary design phase. A RAM methodology is presented for predicting facility/laboratory inherent availability (i.e., availability that only considers the steady-state effects of design) at the preliminary design phase in support of Department of Energy (DOE) Order 430.1A (Life Cycle Asset Management) and DOE Order 420.1B (Facility Safety). The methodology presented identifies the appropriate system-level reliability and maintainability metrics and discusses how these metrics are used in a fault tree analysis for predicting the facility/laboratory inherent availability. The inherent availability predicted is compared against design criteria to determine if changes to the facility/laboratory preliminary design are necessary to meet the required availability objective in the final design.

  6. Computational Study of Flow Establishment in a Ram Accelerator

    NASA Technical Reports Server (NTRS)

    Yungster, S.; Radhakrishnan, K.; Rabinowitz, M. J.

    1995-01-01

    The temporal evolution of the combustion process established during projectile transition from the launch tube into the ram accelerator section containing an explosive hydrogen-oxygen-argon gas mixture is studied. The Navier-Stokes equations for chemically reacting flow are solved in a fully coupled manner, using an implicit, time accurate algorithm. The solution procedure is based on a spatially second order total variation diminishing scheme and a temporally second order, variable-step, backward differentiation formula method. The hydrogen-oxygen chemistry is modeled with a 9-species, 19-step mechanism. The accuracy of the solution method is first demonstrated by several benchmark calculations. Numerical simulations of two ram accelerator configurations are then presented. In particular, the temporal developments of shock-induced combustion and thrust forces are followed. Positive thrust is established in both cases; however, in one of the ram accelerator configurations studied, combustion in the boundary layer enhances its separation, ultimately resulting in unstart.

  7. Ram pressure induced star formation in Abell 3266

    NASA Astrophysics Data System (ADS)

    Bonsall, Brittany

    An X-ray observation of the merging galaxy cluster Abell 3266 was obtained via the ROSAT PSPC. This information, along with spectroscopic data from the WIde-field Nearby Galaxy-clusters Survey (i.e. WINGS), were used to investigate whether ram pressure is a mechanism that influences star formation. Galaxies exhibiting ongoing star formation are identified by the presence of strong Balmer lines (Hbeta), known to correspond to early type stars. Older galaxies where a rapid increase in star formation has recently ceased, known as E+A galaxies, are identified by strong Hbeta absorption coupled with little to no [OII] emission. The correlation between recent star formation and "high" ram pressure, as defined by Kapferer et al. (2009) as ≥ 5 x 10-11 dyn cm-2, was tested and lead to a contradiction of the previously held belief that ram pressure influences star formation on the global cluster scale.

  8. Wrap spring clutch syringe ram and frit mixer

    DOEpatents

    Simpson, Frank B.

    2006-07-25

    A wrap spring clutch syringe ram pushes at least one syringe with virtually instantaneous starting and stopping, and with constant motion at a defined velocity during the intervening push. The wrap spring clutch syringe ram includes an electric motor, a computer, a flywheel, a wrap spring clutch, a precision lead screw, a slide platform, and syringe reservoirs, a mixing chamber, and a reaction incubation tube. The electric motor drives a flywheel and the wrap spring clutch couples the precision lead screw to the flywheel when a computer enables a solenoid of the wrap spring clutch. The precision lead screw drives a precision slide which causes syringes to supply a portion of solution into the mixing chamber and the incubation tube. The wrap spring clutch syringe ram is designed to enable the quantitative study of solution phase chemical and biochemical reactions, particularly those reactions that occur on the subsecond time scale.

  9. Energy-Absorbing, Lightweight Wheels

    NASA Technical Reports Server (NTRS)

    Waydo, Peter

    2003-01-01

    Improved energy-absorbing wheels are under development for use on special-purpose vehicles that must traverse rough terrain under conditions (e.g., extreme cold) in which rubber pneumatic tires would fail. The designs of these wheels differ from those of prior non-pneumatic energy-absorbing wheels in ways that result in lighter weights and more effective reduction of stresses generated by ground/wheel contact forces. These wheels could be made of metals and/or composite materials to withstand the expected extreme operating conditions. As shown in the figure, a wheel according to this concept would include an isogrid tire connected to a hub via spring rods. The isogrid tire would be a stiff, lightweight structure typically made of aluminum. The isogrid aspect of the structure would both impart stiffness and act as a traction surface. The hub would be a thin-walled body of revolution having a simple or compound conical or other shape chosen for structural efficiency. The spring rods would absorb energy and partially isolate the hub and the supported vehicle from impact loads. The general spring-rod configuration shown in the figure was chosen because it would distribute contact and impact loads nearly evenly around the periphery of the hub, thereby helping to protect the hub against damage that would otherwise be caused by large loads concentrated onto small portions of the hub.

  10. Design of a Ram Accelerator mass launch system

    NASA Technical Reports Server (NTRS)

    1988-01-01

    The Ram Accelerator, a chemically propelled, impulsive mass launch system, is presented as a viable concept for directly launching acceleration-insensitive payloads into low Earth orbit. The principles of propulsion are based on those of an airbreathing supersonic ramjet. The payload vehicle acts as the ramjet centerbody and travels through a fixed launch tube that acts as the ramjet outer cowling. The launch tube is filled with premixed gaseous fuel and oxidizer mixtures that combust at the base of the vehicle and produce thrust. Two modes of in-tube propulsion involving ramjet cycles are used in sequence to accelerate the vehicle from 0.7 km/sec to 9 km/sec. Requirements for placing a 2000 kg vehicle into a 500-km circular orbit, with a minimum amount of onboard rocket propellant for orbital maneuvers, are examined. It is shown that in-tube propulsion requirements dictate a launch tube length of 5.1 km to achieve an exit velocity of 9 km/sec, with peak accelerations not to exceed 1000 g's. Aerodynamic heating due to atmospheric transit requires minimal ablative protection and the vehicle retains a large percentage of its exit velocity. An indirect orbital insertion maneuver with aerobraking and two apogee burns is examined to minimize the required onboard propellant mass. An appropriate onboard propulsion system design to perform the required orbital maneuvers with minimum mass requirements is also determined. The structural designs of both the launch tube and the payload vehicle are examined using simple structural and finite element analysis for various materials.

  11. Data requirements for verification of ram glow chemistry

    NASA Technical Reports Server (NTRS)

    Swenson, G. R.; Mende, S. B.

    1985-01-01

    A set of questions is posed regarding the surface chemistry producing the ram glow on the space shuttle. The questions surround verification of the chemical cycle involved in the physical processes leading to the glow. The questions, and a matrix of measurements required for most answers, are presented. The measurements include knowledge of the flux composition to and from a ram surface as well as spectroscopic signatures from the U to visible to IR. A pallet set of experiments proposed to accomplish the measurements is discussed. An interim experiment involving an available infrared instrument to be operated from the shuttle Orbiter cabin is also be discussed.

  12. Three-dimensional assessment of the effects of high-density embolization material on the absorbed dose in the target for Gamma Knife radiosurgery of arteriovenous malformations.

    PubMed

    Watanabe, Yoichi; Sandhu, Divyajot; Warmington, Leighton; Moen, Sean; Tummala, Ramachandra

    2016-12-01

    OBJECTIVE Arteriovenous malformation (AVM) is an intracranial vascular disorder. Gamma Knife radiosurgery (GKRS) is used in conjunction with intraarterial embolization to eradicate the nidus of AVMs. Clinical results indicate that patients with prior embolization tend to gain less benefit from GKRS. The authors hypothesized that this was partly caused by dosimetric deficiency. The actual dose delivered to the target may be smaller than the intended dose because of increased photon attenuation by high-density embolic materials. The authors performed a phantom-based study to quantitatively evaluate the 3D dosimetric effect of embolic material on GKRS. METHODS A 16-cm-diameter and 12-cm-long cylindrical phantom with a 16-cm-diameter hemispherical dome was printed by a 3D printer. The phantom was filled with radiologically tissue-equivalent polymer gel. To simulate AVM treatment with embolization, phantoms contained Onyx 18. The material was injected into an AVM model, which was suspended in the polymer gel. The phantom was attached to a Leksell frame by standard GK fixation method, using aluminum screws, for imaging. The phantom was scanned by a Phillips CT scanner with the standard axial-scanning protocol (120 kV and 1.5-mm slice thickness). CT-based treatment planning was performed with the GammaPlan treatment planning system (version 10.1.1). The plan was created to cover a fictitious AVM target volume near the embolization areas with eleven 8-mm shots and a prescription dose of 20 Gy to 50% isodose level. Dose distributions were computed using both tissue maximum ratio (TMR) 10 and convolution dose-calculation algorithms. These two 3D dose distributions were compared using an in-house program. Additionally, the same analysis method was applied to evaluate the dosimetric effects for 2 patients previously treated by GKRS. RESULTS The phantom-based analyses showed that the mean dose difference between TMR 10 and convolution doses of the AVM target was no larger than

  13. Lack of evidence of Brucella ovis infection in rams in Quebec.

    PubMed

    Arsenault, Julie; Girard, Christiane; Dubreuil, Pascal; Bélanger, Denise

    2004-04-01

    A study was conducted to estimate the seroprevalence of Brucella ovis infection in rams in the Estrie and Bas-Saint-Laurent regions (Quebec). Rams sera (n = 258) were serologically evaluated from 224 rams in 30 commercial flocks and from 34 rams at 2 slaughterhouses by using an enzyme linked immunosorbent assay. Epididymides and testes were examined by palpation on farms and microscopically for culled rams. No ram was seropositive to Brucella ovis or had lesions suggestive of brucellosis from the farm or slaughterhouse surveys.

  14. Equatorial disk formation around rotating stars due to ram pressure confinement by the stellar wind

    NASA Technical Reports Server (NTRS)

    Bjorkman, J. E.; Cassinelli, J. P.

    1993-01-01

    The axisymmetric 2D supersonic solution of a rotating, radiation-driven stellar wind presently obtained by a simple approximation predicts the formation of a dense equatorial disk, when the star's rotation rate lies above a threshold value that depends on the ratio of the wind's terminal speed to the escape speed of the star. The disk is formed because the trajectories of the wind leaving the stellar surface at high latitudes carry it down to the equatorial plane; there, the material passes through a standing oblique shock atop the disk; it is therefore the ram pressure of the polar wind that compresses and confines the disk.

  15. Simulation of Hydrodynamic RAM of Aircraft Fuel Tank by Ballistic Penetration and Detonation

    NASA Astrophysics Data System (ADS)

    Kim, Jong H.; Jun, Seung M.

    Airframe survivability and hydrodynamic ram effect of aircraft are investigated. Penetration and internal detonation of a simple tank and ICW(Intermediate Complexity Wing) are simulated by nonlinear explicit calculation. Structural rupture and fluid burst are analytically realized using general coupling of FSI(Fluid-Structure Interaction) and adaptive master-slave contact. Besides, multi-material Eulerian solver and porosity algorithm are employed to model explosive inside fuel and tank bays which are defined in multi-coupling surfaces. Structure and fluid results are animated on the same viewport for enhanced visualization.

  16. Atomic and electronic structure of perfect dislocations in the solar absorber materials CuInSe2 and CuGaSe2 studied by first-principles calculations

    NASA Astrophysics Data System (ADS)

    Barragan-Yani, Daniel; Albe, Karsten

    2017-03-01

    Structural and electronic properties of screw and 60∘-mixed glide and shuffle dislocations in the solar absorber materials CuInSe2 and CuGaSe2 are investigated by means of electronic structure calculations within density functional theory (DFT). Screw dislocations present distorted bonds but remain fully coordinated after structural relaxation. Relaxed 60∘-mixed dislocations, in contrast, exhibit dangling and "wrong," cation-cation or anion-anion bonds, which induce deep charge transition levels and are electrically active. Analysis of Bader charges and local density of states (LDOS) reveals that acceptor and donor levels are induced by α and β cores, respectively. Moreover, there is local charge accumulation in the surrounding of those cores which contain dangling or "wrong" bonds. Thus the apparently harmless nature of dislocations is not because they are electrically inactive, but can only be a result of passivation by segregating defects.

  17. A comparison of screen and ram extrusion-spheronisation of simple pharmaceutical pastes based on microcrystalline cellulose.

    PubMed

    Zhang, M; Wilson, D I; Ward, R; Seiler, C; Rough, S L

    2013-11-18

    The performance of two laboratory-scale extrusion apparatuses used to approximate the action of an industrial screen extruder, namely a multi-holed die ram extruder and a roller screen extruder, were compared. Both devices featured short dies (ram 2mm, screen 1mm) with die diameter 1mm and hole area fraction approaching 0.25. A series of water/microcrystalline cellulose (MCC) pastes with water contents varying from 45 to 60 wt% were extruded and pellets obtained from subsequent spheronisation of the extrudates characterised in terms of size and shape. Each device exhibited a different range of processing windows for acceptable spheronised products, with the ram apparatus being able to extrude a wider range of paste water contents than the screen device. The pellets obtained from extrusion-spheronisation (E-S) of the pastes via the screen device were in general smaller, with a wider size distribution, than those from ram E-S. These results are attributed to the different mechanical histories experienced by the pastes in the two types of extruder, which lead to different extrudate densities being achieved. MCC/water/calcium carbonate pastes were also tested, where the latter component represented a 'hard' (non-deformable) active pharmaceutical ingredient. Addition of calcium carbonate increased the stiffness of the paste, which could be countered by adjusting the water content of the deformable MCC/water matrix within the extrudability limits of the latter material.

  18. Application of ICP-OES to the determination of CuIn(1-x)Ga(x)Se2 thin films used as absorber materials in solar cell devices.

    PubMed

    Fernández-Martínez, Rodolfo; Caballero, Raquel; Guillén, Cecilia; Gutiérrez, María Teresa; Rucandio, María Isabel

    2005-05-01

    CuIn(1-x)Ga(x)Se2 [CIGS; x=Ga/(In+Ga)] thin films are among of the best candidates as absorber materials for solar cell applications. The material quality and main properties of the polycrystalline absorber layer are critically influenced by deviations in the stoichiometry, particularly in the Cu/(In+Ga) atomic ratio. In this work a simple, sensitive and accurate method has been developed for the quantitative determination of these thin films by inductively coupled plasma optical emission spectrometry (ICP-OES). The proposed method involves an acid digestion of the samples to achieve the complete solubilization of CIGS, followed by the analytical determination by ICP-OES. A digestion procedure with 50% HNO3 alone or in the presence of 10% HCl was performed to dissolve those thin films deposited on glass or Mo-coated glass substrates, respectively. Two analytical lines were selected for each element (Cu 324.754 and 327.396 nm, Ga 294.364 and 417.206 nm, In 303.936 and 325.609 nm, Se 196.090 and 203.985 nm, and Mo 202.030 and 379.825 nm) and a study of spectral interferences was performed which showed them to be suitable, since they offered a high sensitivity and no significant inter-element interferences were detected. Detection limits for all elements at the selected lines were found to be appropriate for this kind of application, and the relative standard deviations were lower than 1.5% for all elements with the exception of Se (about 5%). The Cu/(In+Ga) atomic ratios obtained from the application of this method to CIGS thin films were consistent with the study of the structural and morphological properties by X-ray diffraction (XRD) and scanning electron microscopy (SEM).

  19. Unidirectional perfect absorber

    PubMed Central

    Jin, L.; Wang, P.; Song, Z.

    2016-01-01

    This study proposes a unidirectional perfect absorber (UPA), which we realized with a two-arm Aharonov-Bohm interferometer, that consists of a dissipative resonator side-coupled to a uniform resonator array. The UPA has reflection-less full absorption on one direction, and reflectionless full transmission on the other, with an appropriate magnetic flux and coupling, detuning, and loss of the side-coupled resonator. The magnetic flux controls the transmission, the left transmission is larger for magnetic flux less than one-half flux quantum; and the right transmission is larger for magnetic flux between one-half and one flux quantum. Besides, a perfect absorber (PA) can be realized based on the UPA, in which light waves from both sides, with arbitrary superposition of the ampli- tude and phase, are perfectly absorbed. The UPA is expected to be useful in the design of novel optical devices. PMID:27615125

  20. Shock absorber servicing tool

    NASA Technical Reports Server (NTRS)

    Koepler, Jack L. (Inventor); Hill, Robert L. (Inventor)

    1981-01-01

    A tool to assist in the servicing of a shock absorber wherein the shock absorber is constructed of a pair of aligned gas and liquid filled chambers. Each of the chambers is separated by a movable separator member. Maximum efficiency of the shock absorber is achieved in the locating of a precise volume of gas within the gas chamber and a precise volume of liquid within the liquid chamber. The servicing tool of this invention employs a rod which is to connect with the separator and by observation of the position of the rod with respect to the gauge body, the location of the separator is ascertained even though it is not directly observable.

  1. Unidirectional perfect absorber

    NASA Astrophysics Data System (ADS)

    Jin, L.; Wang, P.; Song, Z.

    2016-09-01

    This study proposes a unidirectional perfect absorber (UPA), which we realized with a two-arm Aharonov-Bohm interferometer, that consists of a dissipative resonator side-coupled to a uniform resonator array. The UPA has reflection-less full absorption on one direction, and reflectionless full transmission on the other, with an appropriate magnetic flux and coupling, detuning, and loss of the side-coupled resonator. The magnetic flux controls the transmission, the left transmission is larger for magnetic flux less than one-half flux quantum; and the right transmission is larger for magnetic flux between one-half and one flux quantum. Besides, a perfect absorber (PA) can be realized based on the UPA, in which light waves from both sides, with arbitrary superposition of the ampli- tude and phase, are perfectly absorbed. The UPA is expected to be useful in the design of novel optical devices.

  2. Design of a nonlinear torsional vibration absorber

    NASA Astrophysics Data System (ADS)

    Tahir, Ammaar Bin

    larger than that in the latter. A nonlinear absorber design has been proposed comprising of thin beams as elastic elements. The geometric configuration of the proposed design has been shown to provide cubic stiffness nonlinearity in torsion. The values of design variables, namely the strength of nonlinearity alpha and torsional stiffness kalpha, were obtained by optimizing dimensions and material properties of the beams for a maximum vibration energy dissipation in the nonlinear absorber. A parametric study has also been conducted to analyze the effect of the magnitude of excitation provided to the system on the performance of a nonlinear absorber. It has been shown that the nonlinear absorber turns out to be more effective in terms of energy dissipation as compared to a linear absorber with an increase in the excitation level applied to the system.

  3. Shock Absorbing System

    NASA Astrophysics Data System (ADS)

    1982-01-01

    A lightweight, inexpensive shock-absorbing system, developed by Langley Research Center 20 years ago, is now in service as safety device for an automated railway at Duke University Medical Center. The transportation system travels at about 25 miles per hour, carrying patients, visitors, staff and cargo. At the end of each guideway of the system are "frangible," (breakable) tube "buffers." If a slowing car fails to make a complete stop at the terminal, it would bump and shatter the tubes, absorbing energy that might otherwise jolt the passengers or damage the vehicle.

  4. Efficient Hessian computation using sparse matrix derivatives in RAM notation.

    PubMed

    von Oertzen, Timo; Brick, Timothy R

    2014-06-01

    This article proposes a new, more efficient method to compute the minus two log likelihood, its gradient, and the Hessian for structural equation models (SEMs) in reticular action model (RAM) notation. The method exploits the beneficial aspect of RAM notation that the matrix derivatives used in RAM are sparse. For an SEM with K variables, P parameters, and P' entries in the symmetrical or asymmetrical matrix of the RAM notation filled with parameters, the asymptotical run time of the algorithm is O(P ' K (2) + P (2) K (2) + K (3)). The naive implementation and numerical implementations are both O(P (2) K (3)), so that for typical applications of SEM, the proposed algorithm is asymptotically K times faster than the best previously known algorithm. A simulation comparison with a numerical algorithm shows that the asymptotical efficiency is transferred to an applied computational advantage that is crucial for the application of maximum likelihood estimation, even in small, but especially in moderate or large, SEMs.

  5. Initiation of combustion in the thermally choked ram accelerator

    NASA Technical Reports Server (NTRS)

    Bruckner, A. P.; Burnham, E. A.; Knowlen, C.; Hertzberg, A.; Bogdanoff, D. W.

    1992-01-01

    The methodology for initiating stable combustion in a ram accelerator operating in the thermally choked mode is presented in this paper. The ram accelerator is a high velocity ramjet-in-tube projectile launcher whose principle of operation is similar to that of an airbreathing ramjet. The subcaliber projectile travels supersonically through a stationary tube filled with a premixed combustible gas mixture. In the thermally choked propulsion mode subsonic combustion takes place behind the base of the projectile and leads to thermal choking, which stabilizes a normal shock system on the projectile, thus producing forward thrust. Projectiles with masses in the 45-90 g range have been accelerated to velocities up to 2650 m/sec in a 38 mm bore, 16 m long accelerator tube. Operation of the ram accelerator is started by injecting the projectile into the accelerator tube at velocities in the 700 - 1300 m/sec range by means of a conventional gas gun. A specially designed obturator, which seals the bore of the gun during this initial acceleration, enters the ram accelerator together with the projectile. The interaction of the obturator with the propellant gas ignites the gas mixture and establishes stable combustion behind the projectile.

  6. A User of RAMS*--Saginaw City Schools.

    ERIC Educational Resources Information Center

    Hall, Randall K.

    In 1969 the Saginaw, Michigan City School System affiliated with the Remotely Accessible Management System (RAMS) developed by the Oakland Schools, a regional service agency. The affiliation enabled Saginaw to move into computerized data processing with minimal costs for programing personnel, systems specialists, hardware, software, and operating…

  7. RAMS approach for reusable launch vehicle advanced studies

    NASA Astrophysics Data System (ADS)

    Tatry, PH.; Deneu, F.; Simonotti, J. L.

    The emerging of reusable single stage to orbit concept as credible launchers in the turn of the century is changing some technical and technological approaches in the way of doing future launcher advanced studies. Among others (such as operations through the "aircraft-like operations" concept), the RAMS approach (reliability, availability, maintainability and safety) has to be implemented from the very beginning of a concept study, especially for the SSTOs ones in order to meet the "able" requirements (affordable, reusable, reliable, available and operable). Beyond the "traditional" considerations applied to expendable launchers and/or man rated space transportation systems, the RAMS involvement in reusable launcher advanced studies and concept trade-offs must allow to perform the best balance between costs, performance and related risks. For instance, in the framework of SSTOs key technologies identification studies performed at Aerospatiale, the RAMS have been involved from the beginning of the preliminary design task. This approach has shown that the assessment of the main propulsion failure risks and associated probabilities of occurrence have strongly affected the vehicle design within the mission management and technical aspects such as main propulsion specifications, ascent trajectory shaping and landing phase scenario (VTOVL configuration). This paper intends to describe this RAMS approach and addresses how it has been applied on trade-off on VTOVL concept.

  8. 17. Detail of base of 'Flying Ram' in NW corner ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. Detail of base of 'Flying Ram' in NW corner of foyer. Camera is looking SW. First doorway beyond fountain leads to basement and men's lounge seen in WA-197-44. Second doorway leads to storefront corner at Seventh Ave. and Olive Way. (Aug. 1991) - Fox Theater, Seventh Avenue & Olive Way, Seattle, King County, WA

  9. BioRAM Lite v.1.0

    SciTech Connect

    2010-08-05

    BioRAM lite is a training tool for teaching the processes which should be using in assessing biosafety and biosecurity risks. The tool includes 4 separate workbooks – two for biosafety and two for biosecurity. The tools include a set of questions which are scored using ordinal values and the mathematical equations to combine the answers into likelihood and consequence values.

  10. OSCEE fan exhaust bulk absorber treatment evaluation

    NASA Technical Reports Server (NTRS)

    Bloomer, H. E.; Samanich, N. E.

    1980-01-01

    The acoustic suppression capability of bulk absorber material designed for use in the fan exhaust duct walls of the quiet clean short haul experiment engine (OCSEE UTW) was evaluated. The acoustic suppression to the original design for the engine fan duct which consisted of phased single degree-of-freedom wall treatment was tested with a splitter and also with the splitter removed. Peak suppression was about as predicted with the bulk absorber configuration, however, the broadband characteristics were not attained. Post test inspection revealed surface oil contamination on the bulk material which could have caused the loss in bandwidth suppression.

  11. Determination of ginsenoside content in Panax ginseng C.A. Meyer and Panax quinquefolius L. root materials and finished products by high-performance liquid chromatography with ultraviolet absorbance detection: interlaboratory study.

    PubMed

    Brown, Paula N; Yu, Ronan; Cain, T; Huie, G; Jin, C D; Kababick, J N; Leong, G; LeVanseler, K; Lunetta, S; Ma, Y C; Reif, K; Schaneberg, B; Shevchuk, C; Smith, R; Sullivan, D; Wijewickreme, N; Windust, A

    2013-01-01

    An interlaboratory study was conducted on an HPLC method with UV absorbance detection, previously validated using AOAC single-laboratory validation guidelines, for the determination of the six major ginsenosides (Rg1, Re, Rb1, Rc, Rb2, and Rd) in Panax ginseng C.A. Meyer and Panax quinquefolius L. root materials, extracts, and finished products. Fourteen participating laboratories analyzed five test materials (P. ginseng whole root, P. ginseng powdered extract, P. quinquefolius whole root, P. quinquefolius powdered extract, and P. ginseng powdered extract spiked in a matrix blank) as blind duplicates, and two test materials (P. ginseng powdered whole root tablet and P. quinquefolius powdered extract hard-filled capsule) as single samples. Due to the variability of the ginsenosides (low level concentration of Rb2 in P. quinquefolius raw materials and in P. ginseng spiked matrix blanks, and the possibility of incomplete hydrolysis of the finished products during processing), it was deemed more applicable to analyze total ginsenosides rather than individual ones. Outliers were evaluated and omitted using the Cochran's test and single and double Grubbs' tests. The reproducibility RSD (RSD(R)) for the blind duplicate samples ranged from 4.38 to 5.39%, with reproducibility Horwitz Ratio (HorRat(R)) values ranging from 1.5 to 1.9. For the single replicate samples, the data sets were evaluated solely by their repeatability HorRat (HorRat(r)), which were 2.9 and 3.5 for the capsule and tablet samples, respectively. Based on these results, the method is recommended for AOAC Official First Action for the determination of total ginsenosides in P. ginseng and P. quinquefolius root materials and powdered extracts.

  12. Evidence of melatonin synthesis in the ram reproductive tract.

    PubMed

    Gonzalez-Arto, M; Hamilton, T R dos S; Gallego, M; Gaspar-Torrubia, E; Aguilar, D; Serrano-Blesa, E; Abecia, J A; Pérez-Pé, R; Muiño-Blanco, T; Cebrián-Pérez, J A; Casao, A

    2016-01-01

    Melatonin is a ubiquitous molecule found in a wide range of fluids, one of them being ram seminal plasma, in which it can reach higher concentrations than those found in blood, suggesting an extrapineal secretion by the reproductive tract. In order to identify the source of the melatonin found in ram seminal plasma, we first tried to determine whether the melatonin levels were maintained during the day. For this purpose, melatonin concentrations were measured in seminal plasma obtained from first ejaculates of six rams at 6:00 a.m. in total darkness, at 10:00 a.m. and at 14:00 p.m. The melatonin concentration was higher (p < 0.05) in ejaculates collected at 6:00 a.m. than at 10:00 and 14:00. There was no statistical difference between the latter. To further corroborate an extrapineal secretion of melatonin, the presence of the two key enzymes involved in melatonin synthesis, arylalkylamine-N-acetyltransferase (AANAT) and N-acetylserotonin-O-methyltransferase (ASMT) was analyzed by RT-PCR, q-PCR and Western-blot in ram testes, epididymis, and accessory glands. The RT-PCR showed the presence of the m-RNA codifying both AANAT and ASTM in all the tissues under study, but the q-PCR and Western-blot revealed that gene expression of these enzymes was significantly higher in the testis (p < 0.05). Immunohistochemistry confirmed the presence of AANAT and ASMT in the testis and revealed that they were found in the Leydig cells, spermatocytes, and spermatids. Also, measurable levels of melatonin were found in testicular tissue and the tail of the epididymis. In conclusion, our study indicates that the testes are one of the likely sources of the high levels of melatonin found in ram seminal plasma, at least during the day.

  13. Penicillamine prevents ram sperm agglutination in media that support capacitation.

    PubMed

    Leahy, T; Rickard, J P; Aitken, R J; de Graaf, S P

    2016-02-01

    Ram spermatozoa are difficult to capacitate in vitro. Here we describe a further complication, the unreported phenomenon of head-to-head agglutination of ram spermatozoa following dilution in the capacitation medium Tyrodes plus albumin, lactate and pyruvate (TALP). Sperm agglutination is immediate, specific and persistent and is not associated with a loss of motility. Agglutination impedes in vitro sperm handling and analysis. So the objectives of this study were to investigate the cause of sperm agglutination and potential agents which may reduce agglutination. The percentage of non-agglutinated, motile spermatozoa increased when bicarbonate was omitted from complete TALP suggesting that bicarbonate ions stimulate the agglutination process. d-penicillamine (PEN), a nucleophilic thiol, was highly effective at reducing agglutination. The inclusion of 250 μM PEN in TALP reduced the incidence of motile, agglutinated spermatozoa from 76.7 ± 2.7% to 2.8 ± 1.4%. It was then assessed if PEN (1 mM) could be included in existing ram sperm capacitation protocols (TALP +1 mM dibutyryl cAMP, caffeine and theophylline) to produce spermatozoa that were simultaneously capacitated and non-agglutinated. This protocol resulted in a sperm population which displayed high levels of tyrosine phosphorylated proteins and lipid disordered membranes (merocyanine-540) while remaining motile, viable, acrosome-intact and non-agglutinated. In summary, PEN (1 mM) can be included in ram sperm capacitation protocols to reduce sperm agglutination and allow for the in vitro assessment of ram sperm capacitation.

  14. RAM: a Relativistic Adaptive Mesh Refinement Hydrodynamics Code

    SciTech Connect

    Zhang, Wei-Qun; MacFadyen, Andrew I.; /Princeton, Inst. Advanced Study

    2005-06-06

    The authors have developed a new computer code, RAM, to solve the conservative equations of special relativistic hydrodynamics (SRHD) using adaptive mesh refinement (AMR) on parallel computers. They have implemented a characteristic-wise, finite difference, weighted essentially non-oscillatory (WENO) scheme using the full characteristic decomposition of the SRHD equations to achieve fifth-order accuracy in space. For time integration they use the method of lines with a third-order total variation diminishing (TVD) Runge-Kutta scheme. They have also implemented fourth and fifth order Runge-Kutta time integration schemes for comparison. The implementation of AMR and parallelization is based on the FLASH code. RAM is modular and includes the capability to easily swap hydrodynamics solvers, reconstruction methods and physics modules. In addition to WENO they have implemented a finite volume module with the piecewise parabolic method (PPM) for reconstruction and the modified Marquina approximate Riemann solver to work with TVD Runge-Kutta time integration. They examine the difficulty of accurately simulating shear flows in numerical relativistic hydrodynamics codes. They show that under-resolved simulations of simple test problems with transverse velocity components produce incorrect results and demonstrate the ability of RAM to correctly solve these problems. RAM has been tested in one, two and three dimensions and in Cartesian, cylindrical and spherical coordinates. they have demonstrated fifth-order accuracy for WENO in one and two dimensions and performed detailed comparison with other schemes for which they show significantly lower convergence rates. Extensive testing is presented demonstrating the ability of RAM to address challenging open questions in relativistic astrophysics.

  15. Solar concentrator/absorber

    NASA Technical Reports Server (NTRS)

    Von Tiesenhausen, G. F.

    1976-01-01

    Collector/energy converter, consisting of dual-slope optical concentrator and counterflow thermal energy absorber, is attached to multiaxis support structure. Efficient over wide range of illumination levels, device may be used to generate high temperature steam, serve as solar powered dryer, or power absorption cycle cooler.

  16. Shock Absorbing Helmets

    NASA Technical Reports Server (NTRS)

    1978-01-01

    This paper presents a description of helmets used by football players that offer three times the shock-absorbing capacity of earlier types. An interior padding for the helmets, composed of Temper Foam, first used by NASA's Ames Research Center in the design of aircraft seats is described.

  17. INTERACTION OF LASER RADIATION WITH MATTER. LASER PLASMA: Efficiency of ablative loading of material upon the fast-electron transfer of absorbed laser energy

    NASA Astrophysics Data System (ADS)

    Gus'kov, Sergei Yu; Kasperczuk, A.; Pisarczyk, T.; Borodziuk, S.; Kalal, M.; Limpouch, J.; Ullschmied, J.; Krousky, E.; Masek, K.; Pfeifer, M.; Rohlena, K.; Skala, J.; Pisarczyk, P.

    2006-05-01

    We present the results of experiments on the short-term irradiation of a solid material by a laser beam. The data testify to a rise in efficiency of the energy transfer from the laser pulse to a shock wave due to the fast-electron energy transfer. The experiments were performed with massive aluminium targets on the PALS iodine laser, whose pulse duration (0.4 ns) was much shorter than the time of shock decay and crater formation in the target (50-200 ns). The irradiation experiments were carried out using the fundamental laser harmonic (1.315 μm) with an energy of 360 J. The greater part of the experiments were performed for the radiation intensity exceeding 1015 W cm-2, which corresponded to the efficient generation of fast electrons under the conditions where the relatively long-wavelength iodine-laser radiation was employed. The irradiation intensity was varied by varying the laser beam radius for a specified pulse energy.

  18. Windsock memory COnditioned RAM (CO-RAM) pressure effect: Forced reconnection in the Earth's magnetotail

    NASA Astrophysics Data System (ADS)

    Vörös, Z.; Facskó, G.; Khodachenko, M.; Honkonen, I.; Janhunen, P.; Palmroth, M.

    2014-08-01

    Magnetic reconnection (MR) is a key physical concept explaining the addition of magnetic flux to the magnetotail and closed flux lines back-motion to the dayside magnetosphere. This scenario elaborated by Dungey (1963) can explain many aspects of solar wind-magnetosphere interaction processes, including substorms. However, neither the Dungey model nor its numerous modifications were able to explain fully the onset conditions for MR in the tail. In this paper, we introduce new onset conditions for forced MR in the tail. We call our scenario the "windsock memory conditioned ram pressure effect." Our nonflux transfer-associated forcing is introduced by a combination of the large-scale windsock motions exhibiting memory effects and solar wind dynamic pressure actions on the nightside magnetopause during northward oriented interplanetary magnetic field (IMF). Using global MHD Grand Unified Magnetosphere Ionosphere Coupling Simulation version 4 simulation results, upstream data from Wind, magnetosheath data from Cluster 1 and distant tail data from the two-probe Acceleration, Reconnection, Turbulence and Electrodynamics of the Moon's Interaction with the Sun mission, we show that the simultaneous occurrence of vertical windsock motions of the magnetotail and enhanced solar wind dynamic pressure introduces strong nightside disturbances, including enhanced electric fields and persistent vertical cross-tail shear flows. These perturbations, associated with a stream interaction region in the solar wind, drive MR in the tail during episodes of northward oriented interplanetary magnetic field (IMF). We detect MR indirectly, observing plasmoids in the tail and ground-based signatures of earthward moving fast flows. We also consider the application to solar system planets and close-in exoplanets, where the proposed scenario can elucidate some new aspects of solar/stellar wind-magnetosphere interactions.

  19. Translatory shock absorber for attitude sensors

    NASA Technical Reports Server (NTRS)

    Vonpragenau, G. L.; Morgan, I. T., Jr.; Kirby, C. A. (Inventor)

    1976-01-01

    A translatory shock absorber is provided for mounting an attitude sensor thereon for isolating a sensor from translatory vibrations. The translatory shock absorber includes a hollow block structure formed as one piece to form a parallelogram. The absorber block structure includes a movable top plate for supporting the attitude sensor and a fixed base plate with opposed side plates interposed between. At the junctions of the side plates, and the base and top plates, there are provided grooves which act as flexible hinges for attenuating translatory vibrations. A damping material is supported on a pedestal which is carried on the base plate between the side plates thereof. The top of the damping material rests against the bottom surface of the top plate for eliminating the resonant peaks of vibration.

  20. Perfect terahertz absorber using fishnet based metafilm

    SciTech Connect

    Azad, Abul Kalam; Shchegolkov, Dmitry Yu; Chen, Houtong; Taylor, Antoinette; Smirnova, E I; O' Hara, John F

    2009-01-01

    We present a perfect terahertz (THz) absorber working for a broad-angle of incidence. The two fold symmetry of rectangular fishnet structure allows either complete absorption or mirror like reflection depending on the polarization of incident the THz beam. Metamaterials enable the ability to control the electromagnetic wave in a unique fashion by designing the permittivity or permeability of composite materials with desired values. Although the initial idea of metamaterials was to obtain a negative index medium, however, the evolution of metamaterials (MMs) offers a variety of practically applicable devices for controlling electromagnetic wave such as tunable filters, modulators, phase shifters, compact antenna, absorbers, etc. Terahertz regime, a crucial domain of the electromagnetic wave, is suffering from the scarcity of the efficient devices and might take the advantage of metamaterials. Here, we demonstrate design, fabrication, and characterization of a terahertz absorber based on a simple fishnet metallic film separated from a ground mirror plane by a dielectric spacer. Such absorbers are in particular important for bolometric terahertz detectors, high sensitivity imaging, and terahertz anechoic chambers. Recently, split-ring-resonators (SRR) have been employed for metamaterial-based absorbers at microwave and THz frequencies. The experimental demonstration reveals that such absorbers have absorptivity close to unity at resonance frequencies. However, the downside of these designs is that they all employ resonators of rather complicated shape with many fine parts and so they are not easy to fabricate and are sensitive to distortions.

  1. Evaluation of Magnetoresistive RAM for Space Applications

    NASA Technical Reports Server (NTRS)

    Heidecker, Jason

    2014-01-01

    Magnetoresistive random-access memory (MRAM) is a non-volatile memory that exploits electronic spin, rather than charge, to store data. Instead of moving charge on and off a floating gate to alter the threshold voltage of a CMOS transistor (creating different bit states), MRAM uses magnetic fields to flip the polarization of a ferromagnetic material thus switching its resistance and bit state. These polarized states are immune to radiation-induced upset, thus making MRAM very attractive for space application. These magnetic memory elements also have infinite data retention and erase/program endurance. Presented here are results of reliability testing of two space-qualified MRAM products from Aeroflex and Honeywell.

  2. Operation of polycarbonate projectiles in the ram accelerator

    NASA Astrophysics Data System (ADS)

    Elder, Timothy

    The ram accelerator is a hypervelocity launcher with direct space launch applications in which a sub-caliber projectile, analogous to the center-body of a ramjet engine, flies through fuel and oxidizer that have been premixed in a tube. Shock interactions in the tube ignite the propellant upon entrance of the projectile and the combustion travels with it, creating thrust on the projectile by stabilizing a high pressure region of gas behind it. Conventional ram accelerator projectiles consist of aluminum, magnesium, or titanium nosecones and bodies. An experimental program has been undertaken to determine the performance of polycarbonate projectiles in ram accelerator operation. Experimentation using polycarbonate projectiles has been divided into two series: determining the lower limit for starting velocity (i.e., less than 1100 m/s) and investigating the upper velocity limit. To investigate the influence of body length and starting velocity, a newly developed "combustion gun" was used to launch projectiles to their initial velocities. The combustion gun uses 3-6 m of ram accelerator test section as a breech and 4-6 m of the ram accelerator test section as a launch tube. A fuel-oxidizer mix is combusted in the breech using a spark plug or electric match and bursts a diaphragm, accelerating the ram projectile to its entrance velocity. The combustion gun can be operated at modest fill pressures (20 bar) but can only launch to relatively low velocities (approximately 1000 m/s) without destroying the projectile and obturator upon launch. Projectiles were successfully started at entrance velocities as low as 810 m/s and projectile body lengths as long as 91 mm were used. The tests investigating the upper Mach number limits of polycarbonate projectiles used the conventional single-stage light-gas gun because of its ability to reach higher velocities with a lower acceleration launch. It was determined that polycarbonate projectiles have an upper velocity limit in the

  3. Metasurface Broadband Solar Absorber

    PubMed Central

    Azad, Abul K.; Kort-Kamp, Wilton J. M.; Sykora, Milan; Weisse-Bernstein, Nina R.; Luk, Ting S.; Taylor, Antoinette J.; Dalvit, Diego A. R.; Chen, Hou-Tong

    2016-01-01

    We demonstrate a broadband, polarization independent, wide-angle absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low absorptivity (emissivity) at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- and p-polarizations. We also investigate numerically the frequency-dependent field and current distributions to elucidate how the absorption occurs within the metasurface structure. PMID:26828999

  4. Metasurface Broadband Solar Absorber

    DOE PAGES

    Azad, Abul K.; Kort-Kamp, Wilton J. M.; Sykora, Milan; ...

    2016-02-01

    Here, we demonstrate a broadband, polarization independent, wide-angle absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low absorptivity (emissivity) at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Moreover, our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- and p-polarizations. We also investigate numerically the frequency-dependent field and current distributionsmore » to elucidate how the absorption occurs within the metasurface structure.« less

  5. Metasurface Broadband Solar Absorber

    SciTech Connect

    Azad, Abul K.; Kort-Kamp, Wilton J. M.; Sykora, Milan; Weisse-Bernstein, Nina R.; Luk, Ting S.; Taylor, Antoinette J.; Dalvit, Diego A. R.; Chen, Hou-Tong

    2016-02-01

    Here, we demonstrate a broadband, polarization independent, wide-angle absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low absorptivity (emissivity) at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Moreover, our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- and p-polarizations. We also investigate numerically the frequency-dependent field and current distributions to elucidate how the absorption occurs within the metasurface structure.

  6. Ionized Absorbers in AGN

    NASA Technical Reports Server (NTRS)

    Mathur, S.

    1999-01-01

    As a part of this program, we observed three AGN:PKS2251 + 113, PG0043 = 039 and PLH909. Two objects show signatures of absorbtion in their UV spectra. Based on our earlier modeling of X-ray warm absorbents, we expected to observe X-ray observation in these objects. The third, PLH909, is known to have soft excess in EINSTEIN data. Attachment: "Exploratory ASCA observation of broad absorption line quasi-stellar objects".

  7. Ram seminal plasma improves pregnancy rates in ewes cervically inseminated with ram semen stored at 5 °C for 24 hours.

    PubMed

    López-Pérez, A; Pérez-Clariget, R

    2012-01-15

    In this study, we compared pregnancy rates obtained using ram semen stored at 5 °C for 24 h, with ram or bull seminal plasma (SP) added to TRIS-egg yolk extender. During the breeding period, 670 adult Corriedale ewes were cervically inseminated with semen (2 × 10(8) sperm in a volume of 0.2 mL) from eight adult Corriedale rams. Ejaculates, obtained using an artificial vagina, were split into three aliquots and diluted with the following: TRIS-egg yolk based extender (T), T + 30% ram SP (R), or T + 30% bull SP (B). Samples were refrigerated and stored at 5 °C for 24 h until used for AI. Pregnancy was assessed by ultrasonography 35 to 40 d after AI. Pregnancy rate was not affected by ram (P = 0.77) or breeding period (P = 0.43), and there were no interactions between extender and ram (P = 0.94), or extender and breeding period (P = 0.24). However, there was an effect of extender (P = 0.0009) on pregnancy rates; ram SP, but not bull SP, increased pregnancy rates compared with extender without SP (49.7, 38.1, and 31.1%, for R, B, and T respectively). In conclusion, ram SP added to TRIS-egg yolk extender had a beneficial effect on the pregnancy rate of ram sperm stored at 5 °C for 24 h and used for cervical insemination of ewes.

  8. Oxygen absorbers in food preservation: a review.

    PubMed

    Cichello, Simon Angelo

    2015-04-01

    The preservation of packaged food against oxidative degradation is essential to establish and improve food shelf life, customer acceptability, and increase food security. Oxygen absorbers have an important role in the removal of dissolved oxygen, preserving the colour, texture and aroma of different food products, and importantly inhibition of food spoilage microbes. Active packaging technology in food preservation has improved over decades mostly due to the sealing of foods in oxygen impermeable package material and the quality of oxygen absorber. Ferrous iron oxides are the most reliable and commonly used oxygen absorbers within the food industry. Oxygen absorbers have been transformed from sachets of dried iron-powder to simple self-adhesive patches to accommodate any custom size, capacity and application. Oxygen concentration can be effectively lowered to 100 ppm, with applications spanning a wide range of food products and beverages across the world (i.e. bread, meat, fish, fruit, and cheese). Newer molecules that preserve packaged food materials from all forms of degradation are being developed, however oxygen absorbers remain a staple product for the preservation of food and pharmaceutical products to reduce food wastage in developed nations and increased food security in the developing & third world.

  9. Methods of calculating radiation absorbed dose.

    PubMed

    Wegst, A V

    1987-01-01

    The new tumoricidal radioactive agents being developed will require a careful estimate of radiation absorbed tumor and critical organ dose for each patient. Clinical methods will need to be developed using standard imaging or counting instruments to determine cumulated organ activities with tracer amounts before the therapeutic administration of the material. Standard MIRD dosimetry methods can then be applied.

  10. Composition for absorbing hydrogen from gas mixtures

    DOEpatents

    Heung, Leung K.; Wicks, George G.; Lee, Myung W.

    1999-01-01

    A hydrogen storage composition is provided which defines a physical sol-gel matrix having an average pore size of less than 3.5 angstroms which effectively excludes gaseous metal hydride poisons while permitting hydrogen gas to enter. The composition is useful for separating hydrogen gas from diverse gas streams which may have contaminants that would otherwise render the hydrogen absorbing material inactive.

  11. Shock absorbing mount for electrical components

    NASA Technical Reports Server (NTRS)

    Dillon, R. F., Jr.; Mayne, R. C. (Inventor)

    1975-01-01

    A shock mount for installing electrical components on circuit boards is described. The shock absorber is made of viscoelastic material which interconnects the electrical components. With this system, shocks imposed on one component of the circuit are not transmitted to other components. A diagram of a typical circuit is provided.

  12. Applications of the ram accelerator to hypervelocity aerothermodynamic testing

    NASA Technical Reports Server (NTRS)

    Bruckner, A. P.; Knowlen, C.; Hertzberg, A.

    1992-01-01

    A ram accelerator used as a hypervelocity launcher for large-scale aeroballistic range applications in hypersonics and aerodynamics research is presented. It is an in-bore ramjet device in which a projectile shaped like the centerbody of a supersonic ramjet is propelled down a stationary tube filled with a tailored combustible gas mixture. Ram accelerator operation has been demonstrated at 39 mm and 90 mm bores, supporting the proposition that this launcher concept can be scaled up to very large bore diameters of the order of 30-60 cm. It is concluded that high quality data obtained from the tube wall and projectile during the aceleration process itself are very useful for understanding aerothermodynamics of hypersonic flow in general, and for providing important CFD validation benchmarks.

  13. Numerical simulations of the superdetonative ram accelerator combusting flow field

    NASA Technical Reports Server (NTRS)

    Soetrisno, Moeljo; Imlay, Scott T.; Roberts, Donald W.

    1993-01-01

    The effects of projectile canting and fins on the ram accelerator combusting flowfield and the possible cause of the ram accelerator unstart are investigated by performing axisymmetric, two-dimensional, and three-dimensional calculations. Calculations are performed using the INCA code for solving Navier-Stokes equations and a guasi-global combustion model of Westbrook and Dryer (1981, 1984), which includes N2 and nine reacting species (CH4, CO, CO2, H2, H, O2, O, OH, and H2O), which are allowed to undergo a 12-step reaction. It is found that, without canting, interactions between the fins, boundary layers, and combustion fronts are insufficient to unstart the projectile at superdetonative velocities. With canting, the projectile will unstart at flow conditions where it appears to accelerate without canting. Unstart occurs at some critical canting angle. It is also found that three-dimensionality plays an important role in the overall combustion process.

  14. Investigation of starting transients in the thermally choked ram accelerator

    NASA Technical Reports Server (NTRS)

    Burnham, E. A.; Hinkey, J. B.; Bruckner, A. P.

    1992-01-01

    An experimental investigation of the starting transients of the thermally choked ram accelerator is presented in this paper. Construction of a highly instrumented tube section and instrumentation inserts provide high resolution experimental pressure, luminosity, and electromagnetic data of the starting transients. Data obtained prior to and following the entrance diaphragm show detailed development of shock systems in both combustible and inert mixtures. With an evacuated launch tube, starting the diffuser is possible at any Mach number above the Kantrowitz Mach number. The detrimental effects and possible solutions of higher launch tube pressures and excessive obturator leakage (blow-by) are discussed. Ignition of a combustible mixture is demonstrated with both perforated and solid obturators. The relative advantages and disadvantages of each are discussed. Data obtained from these starting experiments enhance the understanding of the ram accelerator, as well as assist in the validation of unsteady, chemically reacting CFD codes.

  15. Effect of selenium supplementation on performance, cost economics, and biochemical profile of Nellore ram lambs

    PubMed Central

    Sushma, K.; Reddy, Y. Ramana; Kumari, N. Nalini; Reddy, P. Baswa; Raghunandan, T.; Sridhar, K.

    2015-01-01

    Aim: Present experiment was conducted to investigate the effect of selenium (Se) supplementation on performance, carcass characteristics, meat composition, shelflife of meat and biochemical profile in Nellore ram lambs. Materials and Methods: 24 male Nellore ram lambs (15.75±0.47 kg) were randomly divided into four dietary groups with six lambs in each and reared under uniform management conditions for 120 days. Basal diet was not supplemented with Se and consisted of green fodder (Se 0.09 mg/kg dry matter [DM]), dry roughage (Se 0.11 mg/kg DM) and concentrate mixture (Se 0.019 mg/kg DM) and fed individually. Dietary treatments were prepared by adding graded levels Se (0, 0.45, 0.9, and 1.8 ppm) to concentrate mixture (1% body weight [BW]) from sodium selenite. Feed offered and refusal measured daily; and BWs were measured at fortnight interval to find out average daily gain (g), feed conversion ratio (FCR), cost economics and plane of nutrition. Serum biochemical profile (concentration of glucose, total protein, albumin, globulin, cholesterol, and hemoglobin) was assessed on 0, 60th, and 120th day. At the end of experiment, the carcass characteristics (dressing percentage, cut-up parts, meat to bone ratio) and meat chemical composition were evaluated. Meat keeping (thiobarbituric acid reactive substances) quality from different groups was evaluated on day 0, 3, and 6 post-slaughter. Results: Dietary Se supplementation did not show any effect on weight gain, FCR, cost economics, plane of nutrition, and serum biochemical profile in Nellore ram lambs. However, Se supplemented lambs had numerically higher weight gain than the unsupplemented lambs. Similarly, carcass characteristics and keeping quality were comparable among the four treatments. However, numerical increase in post-slaughter keeping quality with increasing Se supplementation was observed. Conclusion: It can be concluded that supplementation of Se in the form of sodium selenite (inorganic source) at

  16. The effect of cushion-ram pulsation on hot stamping

    NASA Astrophysics Data System (ADS)

    Landgrebe, Dirk; Rautenstrauch, Anja; Kunke, Andreas; Polster, Stefan; Kriechenbauer, Sebastian; Mauermann, Reinhard

    2016-10-01

    Hot stamping is an important technology for manufacturing high-strength components. This technology offers the possibility to achieve significant weight reductions. In this study, cushion-ram pulsation (CRP), a new technology for hot stamping on servo-screw presses, was investigated and applied for hot stamping. Compared to a conventional process, the tests yielded a significantly higher drawing depth. In this paper, the CRP technology and the first test results with hot stamping were described in comparison to the conventional process.

  17. 120. Stage basement. View of the downstage, right, hydraulic ram ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    120. Stage basement. View of the downstage, right, hydraulic ram (type B) "star lift" and trap mechanism. The trap is in the retracted (open) position, but the opening in the stage floor was covered after the lift was taken out of service (see also sheet 8 of 9, details 5, 6A and 6B). - Auditorium Building, 430 South Michigan Avenue, Chicago, Cook County, IL

  18. Research Needs to Reduce Maritime Collisions, Rammings, and Groundings.

    DTIC Science & Technology

    1981-05-01

    S .. -A CHAPTER VI: COLLECTION AND EXCHANGE OF INFORMATION 52 Models of Information-Exchange Systems Needs in the Maritime Industry CHAPTER VII...Relations FIGURE 2 Facets of a systems approach to mritin-e casualties. 31 -, 1> MINT a ~ II -b -* -* I TTTIT V < S .T . IT B . - III - MYTNI I NI ’p I I...PREPARED BY: IMTRB COMMITTEE ON MARITIME COLLISIONS, RAMMINGS, AND GROUNDINGS DETNTO POIIN EVALUTE -]3-3HAZ RD "-- " . .. .. ... S *.....I..... .,,VEi

  19. The Alcoa ram fastener: A reusable blind rivet

    NASA Technical Reports Server (NTRS)

    Dewalt, W. J.

    1972-01-01

    Results of tensile, shear, fatigue and accelerated weathering tests are presented for the ram fastener, a reusable, single unit blind rivet. The effects of variations in hole size, grip length and sheet thickness on strength properties of the fastener were determined. The test results show these fasteners to have strength characteristics suitable for light structural applications. Exposure to accelerated weathering did not impair their performance.

  20. Simulating Single-Event Upsets in Bipolar RAM's

    NASA Technical Reports Server (NTRS)

    Zoutendyk, J. A.

    1986-01-01

    Simulation technique saves testing. Uses interactive version of SPICE (Simulation Program with Integrated Circuit Emphasis). Device and subcircuit models available in software used to construct macromodel for an integrated bipolar transistor. Time-dependent current generators placed inside transistor macromodel to simulate charge collection from ion track. Significant finding of experiments is standard design practice of reducing power in unaddressed bipolar RAM cell increases sensitivity of cell to single-event upsets.

  1. A 4-Kbit Four-Transistor Dynamic Ram

    DTIC Science & Technology

    1983-06-23

    Low-speed testing of the RAM test chips was done using a 68000-based single - board computer . C programs were used to read and write the chip pins through...testing, high-speed testing, and on-chip test logic. 12 6.3.1. Test Programs Our low-speed tester is a 68000-based single - board computer with parallel I/0

  2. Investigation of Reactive Gasdynamics Phenomena in the Ram Accelerator

    DTIC Science & Technology

    2007-11-02

    Mach number depends on propellant energetics were the topics of this particular study. Propellant mixtures with less heat release than the optimum...Velocity Regime An investigation of superdetonative propulsive cycles was performed. Experiments with projectiles fabricated from aluminum and titanium ...pressures of 21~kPa or less , successful starting of the ram accelerator was possible at a fill pressure of 50 atm. High Acceleration Experiments Using

  3. Tracing ram-pressure stripping with warm molecular hydrogen emission

    SciTech Connect

    Sivanandam, Suresh; Rieke, Marcia J.; Rieke, George H.

    2014-12-01

    We use the Spitzer Infrared Spectrograph to study four infalling cluster galaxies with signatures of ongoing ram-pressure stripping. H{sub 2} emission is detected in all four, and two show extraplanar H{sub 2} emission. The emission usually has a warm (T ∼ 115-160 K) and a hot (T ∼ 400-600 K) component that is approximately two orders of magnitude less massive than the warm one. The warm component column densities are typically 10{sup 19} to 10{sup 20} cm{sup –2} with masses of 10{sup 6} to 10{sup 8} M {sub ☉}. The warm H{sub 2} is anomalously bright compared with normal star-forming galaxies and therefore may be excited by ram-pressure. In the case of CGCG 97-073, the H{sub 2} is offset from the majority of star formation along the direction of the galaxy's motion in the cluster, suggesting that it is forming in the ram-pressure wake of the galaxy. Another galaxy, NGC 4522, exhibits a warm H{sub 2} tail approximately 4 kpc in length. These results support the hypothesis that H{sub 2} within these galaxies is shock-heated from the interaction with the intracluster medium. Stripping of dust is also a common feature of the galaxies. For NGC 4522, where the distribution of dust at 8 μm is well resolved, knots and ripples demonstrate the turbulent nature of the stripping process. The Hα and 24 μm luminosities show that most of the galaxies have star-formation rates comparable to similar mass counterparts in the field. Finally, we suggest a possible evolutionary sequence primarily related to the strength of ram-pressure that a galaxy experiences to explain the varied results observed in our sample.

  4. A 1K shadow RAM for circumvention applications

    SciTech Connect

    Murray, J.R. )

    1991-12-01

    This paper reports that circumvention applications require a memory that retains data through radiation (total dose and transient) and loss of power. Various memory technologies have been reviewed and none, as yet, can meet, these requirements. However, if complementary metal oxide silicon (CMOS) and silicon nitride oxide silicon (SNOS) memories are combined in a shadow RAM (random access memory) configuration, the requirements can be fulfilled.

  5. 86. Photocopied August 1978. CLAY RAMMING EQUIPMENT IN OPERATION IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    86. Photocopied August 1978. CLAY RAMMING EQUIPMENT IN OPERATION IN THE POWER HOUSE IN 1910. A PILE OF CLAY USED TO FILL THE WASHED-OUT AREAS BENEATH THE FOUNDATIONS IS SHOWN IN THE CENTER OF THE ILLUSTRATION BESIDE THE FILLER PIPE. THE WEIGHT USED TO FORCE THE CLAY DOWN UNDER THE FOUNDATIONS IS SHOWN PRESSING ON THE PLUNGER PIPE. (542) - Michigan Lake Superior Power Company, Portage Street, Sault Ste. Marie, Chippewa County, MI

  6. Absorber for terahertz radiation management

    SciTech Connect

    Biallas, George Herman; Apeldoorn, Cornelis; Williams, Gwyn P.; Benson, Stephen V.; Shinn, Michelle D.; Heckman, John D.

    2015-12-08

    A method and apparatus for minimizing the degradation of power in a free electron laser (FEL) generating terahertz (THz) radiation. The method includes inserting an absorber ring in the FEL beam path for absorbing any irregular THz radiation and thus minimizes the degradation of downstream optics and the resulting degradation of the FEL output power. The absorber ring includes an upstream side, a downstream side, and a plurality of wedges spaced radially around the absorber ring. The wedges form a scallop-like feature on the innermost edges of the absorber ring that acts as an apodizer, stopping diffractive focusing of the THz radiation that is not intercepted by the absorber. Spacing between the scallop-like features and the shape of the features approximates the Bartlett apodization function. The absorber ring provides a smooth intensity distribution, rather than one that is peaked on-center, thereby eliminating minor distortion downstream of the absorber.

  7. Ram accelerator direct space launch system - New concepts

    NASA Technical Reports Server (NTRS)

    Bogdanoff, David W.

    1992-01-01

    The ram accelerator, a chemically driven ramjet-in-tube device is a new option for direct launch of acceleration-insensitive payloads into earth orbit. The projectile is the centerbody of a ramjet and travels through a tube filled with a premixed fuel-oxidizer mixture. The tube acts as the cowl of the ramjet. A number of new concepts for a ram accelerator space launch system are presented. The velocity and acceleration capabilities of a number of ram accelerator drive modes, including several new modes, are given. Passive (fin) stabilization during atmospheric transit is investigated and found to be promising. Gasdynamic heating in-tube and during atmospheric transit is studied; the former is found to be severe, but may be alleviated by the selection of the most suitable drive modes, transpiration cooling, or a hydrogen gas core in the launch tube. To place the payload in earth orbit, scenarios using one impulse and three impulses (with an aeropass) and a new scenario involving an auxiliary vehicle are studied. The auxiliary vehicle scenario is found to be competitive regarding payload, and requires a much simpler projectile, but has the disadvantage of requiring the auxiliary vehicle.

  8. High spatial resolution measurements in a single stage ram accelerator

    NASA Technical Reports Server (NTRS)

    Hinkey, J. B.; Burnham, E. A.; Bruckner, A. P.

    1992-01-01

    High spatial resolution experimental tube wall pressure measurements of ram accelerator gas dynamic phenomena are presented in this paper. The ram accelerator is a ramjet-in-tube device which operates in a manner similar to that of a conventional ramjet. The projectile resembles the centerbody of a ramjet and travels supersonically through a tube filled with a combustible gaseous mixture, with the tube acting as the outer cowling. Pressure data are recorded as the projectile passes by sensors mounted in the tube wall at various locations along the tube. Utilization of special highly instrumented sections of tube has allowed the recording of gas dynamic phenomena with high resolution. High spatial resolution tube wall pressure data from the three regimes of propulsion studied to date (subdetonative, transdetonative, and superdetonative) in a single stage gas mixture are presented and reveal the three-dimensional character of the flow field induced by projectile fins and the canting of the fins and the canting of the projectile body relative to the tube wall. Also presented for comparison to the experimental data are calculations made with an inviscid, three-dimensional CFD code. The knowledge gained from these experiments and simulations is useful in understanding the underlying nature of ram accelerator propulsive regimes, as well as assisting in the validation of three-dimensional CFD coded which model unsteady, chemically reactive flows.

  9. Melatonin MT₁ and MT₂ Receptors in the Ram Reproductive Tract.

    PubMed

    González-Arto, Marta; Aguilar, David; Gaspar-Torrubia, Elena; Gallego, Margarita; Carvajal-Serna, Melissa; Herrera-Marcos, Luis V; Serrano-Blesa, Edith; Hamilton, Thais Rose Dos Santos; Pérez-Pé, Rosaura; Muiño-Blanco, Teresa; Cebrián-Pérez, José A; Casao, Adriana

    2017-03-19

    Some melatonin functions in mammals are exerted through MT₁ and MT₂ receptors. However, there are no reports of their presence in the reproductive tract of the ram, a seasonal species. Thus, we have investigated their existence in the ram testis, epididymis, accessory glands and ductus deferens. Real-time polymerase chain reaction (qPCR) revealed higher levels of m-RNA for both receptors in the testis, ampulla, seminal vesicles, and vas deferens, than in the other organs of the reproductive tract (p < 0.05). Western blot analyses showed protein bands compatible with the MT₁ in the testis and cauda epididymis, and for the MT₂ in the cauda epididymis and deferent duct. Immunohistochemistry analyses revealed the presence of MT₁ receptors in spermatogonias, spermatocytes, and spermatids, and MT₂ receptors in the newly-formed spermatozoa in the testis, whereas both receptors were located in the epithelial cells of the ampulla, seminal vesicles, and ductus deferens. Indirect immunofluorescence showed significant differences in the immunolocation of both receptors in spermatozoa during their transit in the epididymis. In conclusion, it was demonstrated that melatonin receptors are present in the ram reproductive tract. These results open the way for new studies on the molecular mechanism of melatonin and the biological significance of its receptors.

  10. RAM - A concept for reducing space payload costs.

    NASA Technical Reports Server (NTRS)

    Powell, D. J.

    1972-01-01

    The post-Apollo era in manned space flight will be dominated in the short term by development of the space shuttle as an economical transportation system for payloads to low earth orbit. Research and Applications Modules (RAM) are a related group of shuttle-launched carriers for such payloads which can be used many times over, thus effecting great savings over currently conventional methods of implementing a program of this type. In order to maximize the potential savings, development and unit costs of the RAM vehicles must be minimized. All of the mission and operating modes can be covered in an economical fashion by the use of only three basic RAM elements - a pressurized module, an unpressurized pallet, and a pressurizable free-flying unit utilized in several combinations. These have been developed as a least cost approach through the consideration of such cost/weight related drivers as available crew size, separability of costly subsystems for multiple use, easy accessibility for maintenance/refurbishment for reuse, and a maximum commonality of hardware with existing and projected space projects.

  11. Experiments on hypersonic ramjet propulsion cycles using a ram accelerator

    NASA Technical Reports Server (NTRS)

    Chew, G.; Knowlen, C.; Burnham, E. A.; Hertzberg, A.; Bruckner, A. P.

    1991-01-01

    Work on hypersonic propulsion research using a ram accelerator is presented. Several different ram accelerator propulsive cycles have been experimentally demonstrated over the Mach number range of 3 to 8.5. The subsonic, thermally choked combustion mode has accelerated projectiles to near the Chapman-Jouguet (C-J) detonation velocity within many different propellant mixtures. In the transdetonative velocity regime (85 to 115 percent of C-J speed), projectiles have established a propulsive cycle which allows them to transition smoothly from subdetonative to superdetonative velocities. Luminosity data indicate that the combustion process moves forward onto the projectile body as it approaches the C-J speed. In the superdetonative velocity range, the projectiles accelerate while always traveling faster than the C-J velocity. Ram accelerator projectiles operating continuously through these velocity regimes generate distinctive hypersonic phenomena which can be studied very effectively in the laboratory. These results would be very useful for validating sophisticated CFD computer codes and in collecting engineering data for potential airbreathing hypersonic propulsive systems.

  12. Electrochemical Corrosion Testing of Neutron Absorber Materials

    SciTech Connect

    Tedd Lister; Ron Mizia; Arnold Erickson; Tammy Trowbridge

    2007-05-01

    This report summarizes the results of crevice-corrosion tests for six alloys in solutions representative of ionic compositions inside the Yucca Mountain waste package should a breech occur. The alloys in these tests are Neutronit A978a (ingot metallurgy, hot rolled), Neutrosorb Plus 304B4 Grade Ab (powder metallurgy, hot rolled), Neutrosorb Plus 304B5 Grade Ab (powder metallurgy, hot rolled), Neutrosorb Plus 304B6 Grade Ab (powder metallurgy, hot rolled), Ni-Cr-Mo-Gd alloy2 (ingot metallurgy, hot rolled), and Alloy 22 (ingot metallurgy, hot rolled).

  13. Multiobjective Topology Optimization of Energy Absorbing Materials

    DTIC Science & Technology

    2015-08-01

    overlapping function. This data structure is tree-shaped and so genetic programming is used as the optimizer. The forward problem is solved with a...strain energy. Results demonstrate the efficacy of the proposed algorithm. 15. SUBJECT TERMS topology optimization; Pareto optimization; genetic ...combined using an overlapping function. This data structure is tree-shaped and so genetic programming is used as the optimizer. The forward problem

  14. Development of structural materials exhibiting dielectric and magnetic loss at radio frequencies

    SciTech Connect

    Duke, J.R. Jr.; Apen, P.G.; Hoisington, M.

    1996-10-01

    This is the final report of a one-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The reduction of radio frequency (RF) return from military assets has been of critical interest for the last twenty years. New materials are required that not only provide a reduction in specular and travelling wave RF energy, but also function mechanically in primary structural applications. Typical radar attenuating material (RAM) is structurally parasitic and its utilization decreases the vehicle range by adding significant weight. New conducting and semiconducting polymers have demonstrated potential for RF absorption and can be incorporated into newly developed isotropic structural foams developed from laser target technology at LANL to absorb RF energy. Successful implementation of this technology will lead to broad-band absorbers, light-weight absorbers and radar-absorbing structures (RAS) that can be applied to existing aircraft or integrated into new designs. These new materials also show a high potential to be developed into {open_quotes}smart{close_quotes} structures, i.e., structures that adapt to the threat environment and optimize their absorption.

  15. Studies on Freezing RAM Semen in Absence of Glycerol.

    NASA Astrophysics Data System (ADS)

    Abdelnaby, Abdelhady Abdelhakeam

    1988-12-01

    Glycerol is widely used as a major cryoprotective agent for freezing spermatozoa of almost all species. However, it reduces fertility of sheep inseminated cervically compared with intrauterine insemination. Studies were conducted to develop a method and procedure for freezing ram semen in the absence of glycerol. Post -thaw survival of ram spermatozoa frozen in the absence of glycerol was affected by time and temperature after collection and before dilution and time after dilution and before freezing. Increase in time at 5^ circC before or after dilution and before freezing increased both post-thaw motility and number of cells passing through Sephadex filter. A cold dilution method was developed. Slow cooling of fresh ram semen and diluting at 5^circ C 2-3 hr. after collection, then freezing 1 hr. after dilution improved both post-thaw motility and number of cells passing through Sephadex filter compared with immediate dilution at 30-37^circC after collection and freezing 3-4 hr. later (P < 0.05). An extender was developed to freeze ram semen in the absence of glycerol. An increase in post-thaw motility was obtained when semen was extended in TES titrated with Tris to pH 7.0 (TEST) and osmotic pressure of 375-400 mOsm/kg, containing 25-30% (v/v) egg yolk and 10% (v/v) maltose. A special device (boat) for freezing was constructed to insure the same height of the sample above LN _2 and thus the same freezing rate from freeze to freeze. Freezing of semen in 0.25cc straws at 5-10 cm above LN_2 (73.8 to 49.5 ^circC/min) yielded higher post-thaw motility than the rates resulted from freezing at 15 cm above LN_2 or 1 cm above LN _2. Faster Thawing in 37^ circC water for 30 sec. (7.8^ circC/sec.) increased post-thaw motility compared with slower thawing in 5 or 20^circ C water (P < 0.05). A lambing rate of 52.2% was obtained in one fertility trial conducted with ram semen frozen without glycerol and 17.1% in a second trial. One injection (IM) of 15 mg PGF_{2alpha}/ewe for

  16. Water absorbency by wool fibers: Hofmeister effect.

    PubMed

    Lo Nostro, Pierandrea; Fratoni, Laura; Ninham, Barry W; Baglioni, Piero

    2002-01-01

    Wool is a complex material, composed of cuticle and epicuticle cells, surrounded by a cell membrane complex. Wool fibers absorb moisture from air, and, once immersed in water, they take up considerable amounts of liquid. The water absorbency parameter can be determined from weight gain, according to a standard method, and used to quantify this phenomenon. In this paper we report a study on the water absorbency (or retention) of untreated wool fibers in the presence of aqueous 1 M salt solutions at 29 degrees C and a relative humidity of either 33% or 56%. The effect of anions was determined by selecting a wide range of different sodium salts, while the effect of cations was checked through some chlorides and nitrates. Our results show a significant specific ion and ion pair "Hofmeister" effects, that change the amount of water absorbed by the fibers. To understand this phenomenon, the water absorbency parameter (A(w)) is compared to different physicochemical parameters such as the lyotropic number, free energy of hydration of ions, molar surface tension increment, polarizability, refractive index increment, and molar refractivity. The data indicate that this Hofmeister phenomenon is controlled by dispersion forces that depend on the polarizability of ionic species, their adsorption frequencies, the solvent, and the substrate. These dispersion forces dominate the behavior in concentrated solutions. They are in accord with new developing theories of solutions and molecular interactions in colloidal systems that account for Hofmeister effects.

  17. Optimization and engineering of microwave absorbers

    NASA Astrophysics Data System (ADS)

    Chen, Kuo-Liang

    1998-12-01

    In this thesis, a concerted effort has been made to study and evaluate the individual electromagnetic properties of the absorbing components including carbon black, conducting fibers, metal flakes, magnetic materials such as carbonyl iron, ferrite and the chiral type of micro- carbon coil. The study of the electromagnetic properties covers functions such as dielectric dissipation, random scattering effect at low and high frequencies, magnetic dissipation at high frequencies and also the effect of chirality for different angles of incidence. The results of these studies have been used in the design, engineering and optimization of the microwave absorbers. The objective of this thesis is to identify the absorption mechanism of each of various type of fillers and to study the synergic effect arising from a combination of these in a non-metallic host medium. This will help us in producing microwave absorbers suitable for broad band application with the advantages of light weight, having high strength and possessing good chemical resistance. The results from experimental measurements of various material combinations have been greatly influenced by the theoretical understanding of the absorption mechanism. Design of microwave absorbers is governed by the requirement of the users as well as the characteristics of the objects (targets) inferred by theoretical understanding and experimental data to arrive at the right formula. Finally a detailed quality control program has to be charted out reflecting both the electromagnetic as well as mechanical properties. This is done by carrying out the tests systematically on small samples and then proceeding to practical absorbers making use of the data compiled earlier on smaller samples. In this thesis, to modify all dielectric absorbing components including micro-carbon chirals to reduce the sensitivity of absorption for different incident angles is unprecedented topic.

  18. The Register of Antarctic Marine Species (RAMS): a ten-year appraisal

    PubMed Central

    Jossart, Quentin; Moreau, Camille; Agüera, Antonio; Broyer, Claude De; Danis, Bruno

    2015-01-01

    Abstract The Register of Antarctic Marine Species (RAMS) is a marine species database that manages an authoritative taxonomic list of species occurring in the Southern Ocean. RAMS links with several other initiatives managing biogeographic or genomics information. The current paper aims to briefly present RAMS and provides an updated snapshot of its contents, in the form of a DarwinCore checklist (available through http://ipt.biodiversity.aq/resource.do?r=rams) and illustrative barplots. Moreover, this article presents a ten year appraisal (since the creation of RAMS). This appraisal first focuses on RAMS bibliometrics. We observed that RAMS was cited (Google Scholar) in 50 distinct publications among which 32 were peer-reviewed in 18 different journals. Three journals (Antarctic Science, Polar Biology, ZooKeys) represent almost 40% of these peer-review publications. The second appraisal focuses on the evolution of new RAMS records. We observed an important decrease in data additions since 2011. As a case study, we focused on an original dataset for a specific group (Asteroidea, Echinodermata). It appears that around one hundred species of asteroids are lacking in RAMS despite the relatively high availability of these data. This suggests that the users’ community (or collaborative projects such as AquaRES) could be helpful in order to maintain the RAMS database over the long term. PMID:26478709

  19. Polarization independent broadband metamaterial absorber based on tapered helical structure

    NASA Astrophysics Data System (ADS)

    Agarwal, Sajal; Prajapati, Y. K.; Singh, V.; Saini, J. P.

    2015-12-01

    This communication presents a tapered helical structure as absorber, made of unconventional material i.e. metamaterial. Modeling, analytical study and the optimization of the absorber have been done. Quad helical optimized structure gives almost unity absorption at 499 nm wavelength and gives the absorption more than 75% from 300 nm to 1650 nm which is a very wide operating region with, average absorbance of 91.32%. Whereas, triple helical structure gives 85% average absorbance with the operating range from 300 nm to 1350 nm. Also, it is analyzed that the presented structures are polarization independent and broadband. Comparison of the proposed quad helical absorber with the existing metamaterial absorbers is done and found it is most eligible.

  20. Absorbent properties of carboxymethylated fiber, hydroentangled nonwoven and regenerated cellulose: a comparative study

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Commercially-available, bleached cotton fibers, rayon, and their hydroentangled counterparts were carboxymethylated to produce cellulosic products with increased absorbency. These cellulose materials were tested for absorbance, spectroscopic properties, degree of substitution and carding ability. Ca...

  1. Ferroelectrics based absorbing layers

    NASA Astrophysics Data System (ADS)

    Hao, Jianping; Sadaune, Véronique; Burgnies, Ludovic; Lippens, Didier

    2014-07-01

    We show that ferroelectrics-based periodic structure made of BaSrTiO3 (BST) cubes, arrayed onto a metal plate with a thin dielectric spacer film exhibit a dramatic enhancement of absorbance with value close to unity. The enhancement is found around the Mie magnetic resonance of the Ferroelectrics cubes with the backside metal layer stopping any transmitted waves. It also involves quasi-perfect impedance matching resulting in reflection suppression via simultaneous magnetic and electrical activities. In addition, it was shown numerically the existence of a periodicity optimum, which is explained from surface waves analysis along with trade-off between the resonance damping and the intrinsic loss of ferroelectrics cubes. An experimental verification in a hollow waveguide configuration with a good comparison with full-wave numerical modelling is at last reported by measuring the scattering parameters of single and dual BST cubes schemes pointing out coupling effects for densely packed structures.

  2. Dual broadband metamaterial absorber.

    PubMed

    Kim, Young Ju; Yoo, Young Joon; Kim, Ki Won; Rhee, Joo Yull; Kim, Yong Hwan; Lee, YoungPak

    2015-02-23

    We propose polarization-independent and dual-broadband metamaterial absorbers at microwave frequencies. This is a periodic meta-atom array consisting of metal-dielectric-multilayer truncated cones. We demonstrate not only one broadband absorption from the fundamental magnetic resonances but additional broadband absorption in high-frequency range using the third-harmonic resonance, by both simulation and experiment. In simulation, the absorption was over 90% in 3.93-6.05 GHz, and 11.64-14.55 GHz. The corresponding experimental absorption bands over 90% were 3.88-6.08 GHz, 9.95-10.46 GHz and 11.86-13.84 GHz, respectively. The origin of absorption bands was elucidated. Furthermore, it is independent of polarization angle owing to the multilayered circular structures. The design is scalable to smaller size for the infrared and the visible ranges.

  3. [Surgery of Lower Eyelid Ectropion with the Tarsal Strip Procedure, Using Absorbable or Non-Absorbable Sutures for Periosteal Fixation].

    PubMed

    Sommer, F

    2017-01-01

    Purpose Tightening of the lower eyelid is often performed and many techniques are available. This paper describes the outcome of lower eyelid ectropion repair using the lateral tarsal strip procedure. Periosteal fixation of the tarsal strip can be performed with absorbable or non-absorbable sutures. This study compares the surgical results of periosteal fixation of the tarsal strip with a) absorbable and b) non-absorbable suture. Methods Of 206 patients who underwent surgery, data from 161 were available. During the 6 month follow-up period, suture material, recurrence rates and complications were assessed. The analysis was based on photo documentation, surgery reports and patient statements. In all cases surgery was performed by the same surgeon. Results After 6 months, patients showed similar recurrence rates, regardless of whether periosteal fixation of the tarsal strip had been performed with absorbable (61 patients) or non-absorbable (100 patients) material. Only a few complications occurred, including wound healing problems and one allergic reaction in the non-absorbable group. Conclusions In cases of lower eyelid ectropion, the surgical outcome after the tarsal strip procedure was similar for absorbable and non-absorbable sutures.

  4. The New S-RAM Air Variable Compressor/Expander for Heat Pump and Waste Heat to Power Application

    SciTech Connect

    Dehoff, Ryan R; Jestings, Lee; Conde, Ricardo

    2016-05-23

    S-RAM Dynamics (S-RAM) has designed an innovative heat pump system targeted for commercial and industrial applications. This new heat pump system is more efficient than anything currently on the market and utilizes air as the refrigerant instead of hydrofluorocarbon (HFC) refrigerants, leading to lower operating costs, minimal environmental costs or concerns, and lower maintenance costs. The heat pumps will be manufactured in the United States. This project was aimed at determining the feasibility of utilizing additive manufacturing to make the heat exchanger device for the new heat pump system. ORNL and S-RAM Dynamics collaborated on determining the prototype performance and subsequently printing of the prototype using additive manufacturing. Complex heat exchanger designs were fabricated using the Arcam electron beam melting (EBM) powder bed technology using Ti-6Al-4V material. An ultrasonic welding system was utilized in order to remove the powder from the small openings of the heat exchanger. The majority of powder in the small chambers was removed, however, the amount of powder remaining in the heat exchanger was a function of geometry. Therefore, only certain geometries of heat exchangers could be fabricated. SRAM Dynamics evaluated a preliminary heat exchanger design. Although the results of the additive manufacturing of the heat exchanger were not optimum, a less complex geometry was demonstrated. A sleeve valve was used as a demonstration piece, as engine designs from S-RAM Dynamics require the engine to have a very high density. Preliminary designs of this geometry were successfully fabricated using the EBM technology.

  5. Effect of selenium supplementation on semen characteristics of Brazil's ram.

    PubMed

    Piagentini, M; Silva, D C; Dell'Aqua, Cpf; Moya-Araujo, C F; Codognoto, V M; Ramos, A A; Oba, E

    2017-02-20

    The aim of this study was to investigate the effects of different concentrations of oral supplementation with selenium (Se) upon ram sperm parameters. Thirty rams managed in stall under intensive system were used and divided into five groups (six animals per group) as follows: control group (G1) mineral mixture supplementation without Se, group 2 (G2) mineral mixture supplemented with 5 mg/kg Se, group 3 (G3) supplemented with 10 mg/kg Se, group 4 (G4) supplemented with 15 mg/kg Se and group 5 (G5) supplemented with 20 mg/kg Se. For each group, there was an adjustment period of 14 days. The experimental period was 350 days. Every 56 days, the animals were weighed and semen samples were collected by electroejaculation. Semen analysis included volume, mass moviment, total motility, vigour, concentration and morphology. For plasmatic and acrosomal membrane integrity evaluation and mitochondrial membrane potential were used a combination of fluorescent probes. Differences between means values obtained by analysis of variance were verified by Tukey test with 5% probability. There was no statistical difference between treatment groups in relation to volume, mass moviment, total motility, vigour, concentration, plasma and acrosomal membrane integrity (p > .05). Sperm morphology was different between treatment groups, the G1 (0 mg of selenium) had the highest percentage of major defects (11.11 ± 1.11(a) ; p < .05). It was concluded that selenium decrease the percentage of sperm defects and did not directly influence on ram sperm volume, mass moviment, total motility, vigour, concentration and membrane integrity.

  6. Thermally tunable water-substrate broadband metamaterial absorbers

    NASA Astrophysics Data System (ADS)

    Pang, Yongqiang; Wang, Jiafu; Cheng, Qiang; Xia, Song; Zhou, Xiao Yang; Xu, Zhuo; Cui, Tie Jun; Qu, Shaobo

    2017-03-01

    The naturally occurring water has frequency dispersive permittivity at microwave frequencies and thus is a promising constituent material for broadband absorbers. Here, we develop water as the dielectric spacer in the substrate of metal-backed metamaterial (MM) absorbers. The designed substrate is a hybrid of water and a low-permittivity dielectric material. Such a design allows tight packaging of water and easy fabrication of the absorber. We obtain broadband absorption at temperatures of interest by designing the hybrid substrate and MM inclusions. Additionally, the absorption performance of the water-substrate MM absorbers could be tunable according to the environment temperature. We experimentally demonstrate the broadband and thermally tunable absorption performance. We expect that water could replace dielectric layers in other structural MM absorbers to achieve the broadband and thermally tunable absorption performance.

  7. Ram air turbine driving a variable displacement hydraulic pump

    SciTech Connect

    Dickes, G.E.; Brekhus, R.D.; Seidel, W.E.

    1992-09-08

    This patent describes a ram air turbine for use in generating power for an aircraft by driving a load with an airstream intercepting blades of the turbine as the aircraft moves through the air with the turbine applying power to the load during rotation of the blades in a first rotational velocity range and during rotation of the blades in a second rotational velocity range which is lower than the first rotational velocity. It comprises a variable displacement hydraulic pump; and a reduced power output.

  8. Ram accelerator direct launch system for space cargo

    NASA Technical Reports Server (NTRS)

    1987-01-01

    A new method of efficiently accelerating relatively large masses (up to several metric tons) to velocities of 0.6 km/sec up to 12 km/sec using chemical energy has been developed. The vehicle travels through a tube filled with a premixed gaseous fuel and oxidizer mixture. There is no propellant on-board the vehicle. The tube acts as the outer cowling of a ram jet and the energy release process travels with the vehicle. The ballistic efficiency remains high up to extremely high velocities and the acceleration can be maintained at a nearly constant level. Five modes of ram accelerator operation have been investigated; these modes differ primarily in the method of chemical heat release and the operational velocity range, and include two subsonic combustion modes (one of which involves thermally choke a combustion behind the vehicle) and three detonation drive modes. These modes of propulsion are capable of efficient acceleration in the range of 0.6-12 km/sec, although aerodynamic heating becomes severe above about 8 km/sec. Experiments carried out to date at the University of Washington up to 2 km/sec have established proof of principle of the ram accelerator concept and have shown close agreement between predicted and measured performance. A launch system capable of delivering two metric tons into low earth orbit was selected for the purposes of the present study. The preliminary analysis indicates that the overall dimensions of a restricted acceleration (less than approx. 1000 g) launch facility would require a tube 1 m in diameter, with an overall length of approximately 4 km. As in any direct launch scheme, a small on-board rocket is required to circularize the otherwise highly elliptical orbit which intersects the Earth. Various orbital insertion scenarios have been explored for the case of a 9 km/sec ram accelerator launch. These include direct insertion through a single circularization maneuver (i.e., on rocket burn), insertion involving two burns, and a

  9. History of fat grafting: from ram fat to stem cells.

    PubMed

    Mazzola, Riccardo F; Mazzola, Isabella C

    2015-04-01

    Fat injection empirically started 100 years ago to correct contour deformities mainly on the face and breast. The German surgeon Eugene Hollaender (1867-1932) proposed a cocktail of human and ram fat, to avoid reabsorption. Nowadays, fat injection has evolved, and it ranks among the most popular procedures, for it provides the physician with a range of aesthetic and reconstructive clinical applications with regenerative effects on the surrounding tissues. New research from all over the world has demonstrated the role of adipose-derived stem cells, present in the adipose tissue, in the repair of damaged or missing tissues.

  10. Electrochemically regenerable carbon dioxide absorber

    NASA Technical Reports Server (NTRS)

    Woods, R. R.; Marshall, R. D.; Schubert, F. H.; Heppner, D. B.

    1979-01-01

    Preliminary designs were generated for two electrochemically regenerable carbon dioxide absorber concepts. Initially, an electrochemically regenerable absorption bed concept was designed. This concept incorporated the required electrochemical regeneration components in the absorber design, permitting the absorbent to be regenerated within the absorption bed. This hardware was identified as the electrochemical absorber hardware. The second hardware concept separated the functional components of the regeneration and absorption process. This design approach minimized the extravehicular activity component volume by eliminating regeneration hardware components within the absorber. The electrochemical absorber hardware was extensively characterized for major operating parameters such as inlet carbon dioxide partial pressure, process air flow rate, operational pressure, inlet relative humidity, regeneration current density and absorption/regeneration cycle endurance testing.

  11. Liquid Hydrogen Absorber for MICE

    SciTech Connect

    Ishimoto, S.; Suzuki, S.; Yoshida, M.; Green, Michael A.; Kuno, Y.; Lau, Wing

    2010-05-30

    Liquid hydrogen absorbers for the Muon Ionization Cooling Experiment (MICE) have been developed, and the first absorber has been tested at KEK. In the preliminary test at KEK we have successfully filled the absorber with {approx}2 liters of liquid hydrogen. The measured hydrogen condensation speed was 2.5 liters/day at 1.0 bar. No hydrogen leakage to vacuum was found between 300 K and 20 K. The MICE experiment includes three AFC (absorber focusing coil) modules, each containing a 21 liter liquid hydrogen absorber made of aluminum. The AFC module has safety windows to separate its vacuum from that of neighboring modules. Liquid hydrogen is supplied from a cryocooler with cooling power 1.5 W at 4.2 K. The first absorber will be assembled in the AFC module and installed in MICE at RAL.

  12. Effect of heterologous seminal plasma and semen extenders on motility of frozen-thawed ram spermatozoa.

    PubMed

    Mataveia, G A; Terblanche, S J; Nöthling, J O; Gerber, D

    2010-09-01

    Ram seminal plasma increases the fertility of frozen-thawed ram spermatozoa deposited into the cervix. The aim of the current study was to compare the effect of ram seminal plasma to that of bull seminal plasma, dog prostatic fluid, protein-free TALP TrilEq (Triladyl with 0.5 mt of Equex STM paste added to each 100 mt) and heat-treated skim milk on longevity and percentages of progressively motile and aberrantly motile frozen-thawed ram spermatozoa. Three ejaculates from each of 6 rams were extended in TrilEq, pooled and frozen in straws as a single batch per ram. One hundred and eight straws (3 straws from each ram for each fluid) were thawed in random order. Once thawed, a straw was emptied into a tube with 0.85 ml of the appropriate fluid at 37 degrees C and kept at that temperature for 6 h. Motility was assessed at x200 magnification immediately (time zero) and 2, 4 and 6 h after thawing. Progressive motility decreased from each time to the next (P < 0.05) and was 39.0 % (0 h), 26.0 % (2 h), 19.6 % (4 h) and 12.6 % (6 h); SEM 1.24, n = 108 for each group. Ram seminal plasma resulted in higher progressive motility than bull seminal plasma, lower than milk, and similar to the other fluids. Ram seminal plasma resulted in lower aberrant motility than protein-free TALP and similar aberrant motility to other fluids. The effect of ram seminal plasma and dog prostatic fluid was very similar. The effect of ram seminal plasma on the fertility of frozen-thawed ram spermatozoa deposited into the cervix is not due an exceptionally beneficial effect on the motility of spermatozoa.

  13. Numerical Study of Ram Air Airfoils and Upper Surface Bleed-Air Control

    DTIC Science & Technology

    2014-06-16

    of ram -air parachute systems to complement the design and analysis of new and existing airdrop systems. In this paper an unsteady numerical study of...two-dimensional, rigid, ram -air sections with an array of upper surface bleed-air actuators is presented. Aerodynamic forces and lift-to-drag ratios of...a modified Clark-Y ram -air airfoil are calculated from unsteady Reynolds-Averaged Navier-Stokes (RANS) simulations, using the Kestrel and Cobalt flow

  14. Novel Ultraviolet Light Absorbing Polymers For Optical Applications

    NASA Astrophysics Data System (ADS)

    Doddi, Namassivaya; Yamada, Akira; Dunks, Gary B.

    1988-07-01

    Ultraviolet light absorbing monomers have been developed that can be copolymerized with acrylates. The composition of the resultant stable copolymers can be adjusted to totally block the transmission of light below about 430 nm. Fabrication of lenses from the materials is accomplished by lathe cutting and injection molding procedures. These ultraviolet light absorbing materials are non-mutagenic and non-toxic and are currently being used in intraocular lenses.

  15. Elucidation of the RamA Regulon in Klebsiella pneumoniae Reveals a Role in LPS Regulation

    PubMed Central

    De Majumdar, Shyamasree; Yu, Jing; Fookes, Maria; McAteer, Sean P.; Llobet, Enrique; Finn, Sarah; Spence, Shaun; Monaghan, Avril; Kissenpfennig, Adrien; Ingram, Rebecca J.; Bengoechea, José; Gally, David L.; Fanning, Séamus; Elborn, Joseph S.; Schneiders, Thamarai

    2015-01-01

    Klebsiella pneumoniae is a significant human pathogen, in part due to high rates of multidrug resistance. RamA is an intrinsic regulator in K. pneumoniae established to be important for the bacterial response to antimicrobial challenge; however, little is known about its possible wider regulatory role in this organism during infection. In this work, we demonstrate that RamA is a global transcriptional regulator that significantly perturbs the transcriptional landscape of K. pneumoniae, resulting in altered microbe-drug or microbe-host response. This is largely due to the direct regulation of 68 genes associated with a myriad of cellular functions. Importantly, RamA directly binds and activates the lpxC, lpxL-2 and lpxO genes associated with lipid A biosynthesis, thus resulting in modifications within the lipid A moiety of the lipopolysaccharide. RamA-mediated alterations decrease susceptibility to colistin E, polymyxin B and human cationic antimicrobial peptide LL-37. Increased RamA levels reduce K. pneumoniae adhesion and uptake into macrophages, which is supported by in vivo infection studies, that demonstrate increased systemic dissemination of ramA overexpressing K. pneumoniae. These data establish that RamA-mediated regulation directly perturbs microbial surface properties, including lipid A biosynthesis, which facilitate evasion from the innate host response. This highlights RamA as a global regulator that confers pathoadaptive phenotypes with implications for our understanding of the pathogenesis of Enterobacter, Salmonella and Citrobacter spp. that express orthologous RamA proteins. PMID:25633080

  16. The modification and application of RAMS computer code. Final report

    SciTech Connect

    McKee, T.B.

    1995-01-17

    The Regional Atmospheric Modeling System (RAMS) has been utilized in its most updated form, version 3a, to simulate a case night from the Atmospheric Studies in COmplex Terrain (ASCOT) experimental program. ASCOT held a wintertime observational campaign during February, 1991 to observe the often strong drainage flows which form on the Great Plains and in the canyons embedded within the slope from the Continental Divide to the Great Plains. A high resolution (500 m grid spacing) simulation of the 4-5 February 1991 case night using the more advanced turbulence closure now available in RAMS 3a allowed greater analysis of the physical processes governing the drainage flows. It is found that shear interaction above and within the drainage flow are important, and are overpredicted with the new scheme at small grid spacing (< {approximately}1000 m). The implication is that contaminants trapped in nighttime stable flows such as these, will be mixed too strongly in the vertical reducing predicted ground concentrations. The HYPACT code has been added to the capability at LANL, although due to the reduced scope of work, no simulations with HYPACT were performed.

  17. Ram accelerator direct launch system for space cargo

    NASA Technical Reports Server (NTRS)

    Bruckner, A. P.; Hertzberg, A.

    1987-01-01

    The ram accelerator, a chemically-propelled mass driver, is presented as a new approach for directly launching acceleration-insensitive pay-loads into LEO. The cargo vehicle resembles the centerbody of a conventional ramjet and travels through a launch tube filled with a premixed gaseous fuel and oxidizer mixture. The tube acts as the outer cowling of the ramjet and the combustion process travels with the vehicle. Two modes of ram accelerator drive are described, which when used in sequence, are capable of accelerating the cargo vehicle to 10 km/sec. The requirements for placing a 2000 kg vehicle with 50 percent payload fraction into a 400 km orbit, with a minimum of on-board rocket propellant for circularization maneuvers, are examined. It is shown that aerodynamic heating during atmospheric transit results in very little ablation of the nose. Both direct and indirect orbital insertion scenarios are investigated, and a three-step maneuver consisting of two burns and aerobraking is found to minimize the on-board propellant mass. A scenario involving a parking orbit below the desired final orbit is suggested as a means to increase the flexibility of the mass launch concept.

  18. Experimental and numerical investigation of ram extrusion of bread dough

    NASA Astrophysics Data System (ADS)

    Mohammed, M. A. P.; Wanigasooriya, L.; Charalambides, M. N.

    2016-10-01

    An experimental and numerical study on ram extrusion of bread dough was conducted. A laboratory ram extrusion rig was designed and manufactured, where dies with different angles and exit radii were employed. Rate dependent behaviour was observed from tests conducted at different extrusion speeds, and higher extrusion pressure was reported for dies with decreasing exit radius. A finite element simulation of extrusion was performed using the adaptive meshing technique in Abaqus. Simulations using a frictionless contact between the billet and die wall showed that the model underestimates the response at high entry angles. On the other hand, when the coefficient of friction value was set to 0.09 as measured from friction experiments, the dough response was overestimated, i.e. the model extrusion pressure was much higher than the experimentally measured values. When a critical shear stress limit, τmax, was used, the accuracy of the model predictions improved. The results showed that higher die angles require higher τmax values for the model and the experiments to agree.

  19. Flow over a Ram-Air Parachute Canopy

    NASA Astrophysics Data System (ADS)

    Eslambolchi, Ali; Johari, Hamid

    2012-11-01

    The flow field over a full-scale, ram-air personnel parachute canopy was investigated numerically using a finite-volume flow solver coupled with the Spalart-Allmaras turbulence model. Ram-air parachute canopies resemble wings with arc-anhedral, surface protuberances, and an open leading edge for inflation. The rectangular planform canopy had an aspect ratio of 2.2 and was assumed to be rigid and impermeable. The chord-based Reynolds number was 3.2 million. Results indicate that the oncoming flow barely penetrates the canopy opening, and creates a large separation bubble below the lower lip of canopy. A thick boundary layer exists over the entire lower surface of the canopy. The flow over the upper surface of the canopy remains attached for an extended fraction of the chord. Lift increases linearly with angle of attack up to about 12 degrees. To assess the capability of lifting-line theory in predicting the forces on the canopy, the lift and drag data from a two-dimensional simulation of the canopy profile were extended using finite-wing expressions and compared with the forces from the present simulations. The finite-wing predicted lift and drag trends compare poorly against the full-span simulation, and the maximum lift-to-drag ratio is over-predicted by 36%. Sponsored by the US Army NRDEC.

  20. Flow over a Modern Ram-Air Parachute Canopy

    NASA Astrophysics Data System (ADS)

    Mohammadi, Mohammad; Johari, Hamid

    2010-11-01

    The flow field on the central section of a modern ram-air parachute canopy was examined numerically using a finite-volume flow solver coupled with the one equation Spalart-Allmaras turbulence model. Ram-air parachutes are used for guided airdrop applications, and the canopy resembles a wing with an open leading edge for inflation. The canopy surfaces were assumed to be impermeable and rigid. The flow field consisted of a vortex inside the leading edge opening which effectively closed off the canopy and diverted the flow around the leading edge. The flow experienced a rather bluff leading edge in contrast to the smooth leading of an airfoil, leading to a separation bubble on the lower lip of the canopy. The flow inside the canopy was stagnant beyond the halfway point. The section lift coefficient increased linearly with the angle of attack up to 8.5 and the lift curve slope was about 8% smaller than the baseline airfoil. The leading edge opening had a major effect on the drag prior to stall; the drag is at least twice the baseline airfoil drag. The minimum drag of the section occurs over the angle of attack range of 3 -- 7 .

  1. Characterization of Malaysian Trichoderma isolates using random amplified microsatellites (RAMS).

    PubMed

    Siddiquee, Shafiquzzaman; Tan, Soon Guan; Yusuf, Umi Kalsom; Fatihah, Nur Hasan Nudin; Hasan, Md Mainul

    2012-01-01

    Trichoderma species are commercially applied as biocontrol agents against numerous plant pathogenic fungi due to their production of antifungal metabolites, competition for nutrients and space, and mycoparasitism. However, currently the identification of Trichoderma species from throughout the world based on micro-morphological descriptions is tedious and prone to error. The correct identification of Trichoderma species is important as several traits are species-specific. The Random Amplified Microsatellites (RAMS) analysis done using five primers in this study showed different degrees of the genetic similarity among 42 isolates of this genus. The genetic similarity values were found to be in the range of 12.50-85.11% based on a total of 76 bands scored in the Trichoderma isolates. Of these 76 bands, 96.05% were polymorphic, 3.95% were monomorphic and 16% were exclusive bands. Two bands (250 bp and 200 bp) produced by primer LR-5 and one band (250 bp) by primer P1A were present in all the Trichoderma isolates collected from healthy and infected oil palm plantation soils. Cluster analysis based on UPGMA of the RAMS marker data showed that T. harzianum, T. virens and T. longibrachiatum isolates were grouped into different clades and lineages. In this study we found that although T. aureoviride isolates were morphologically different when compared to T. harzianum isolates, the UPGMA cluster analysis showed that the majority isolates of T. aureoviride (seven from nine) were closely related to the isolates of T. harzianum.

  2. Space shuttle Ram glow: Implication of NO2 recombination continuum

    NASA Astrophysics Data System (ADS)

    Swenson, G. R.; Mende, S. B.; Clifton, S.

    1985-09-01

    The ram glow data gathered to data from imaging experiments on space shuttle suggest the glow is a continuum (within 34 angstrom resolution); the continuum shape is such that the peak is near 7000 angstroms decreasing to the blue and red, and the average molecular travel leading to emission after leaving the surface is 20 cm (assuming isotropic scattering from the surface). Emission continuum is rare in molecular systems but the measured spectrum does resemble the laboratory spectrum of NO2 (B) recombination continuum. The thickness of the observed emission is consistent with the NO2 hypothesis given an exit velocity of approx. 2.5 km/sec (1.3 eV) which leaves approx. 3.7 eV of ramming OI energy available for unbonding the recombined NO2 from the surface. The NO2 is formed in a 3-body recombination of OI + NO + m = NO2 + m where OI originates from the atmosphere and NO is chemically formed on the surface from atmospheric NI and OI. The spacecraft surface then acts as the n for the reaction: Evidence exists from orbital mass spectrometer data that the NO and NO2 chemistry described in this process does occur on surfaces of spectrometer orifices in orbit. Surface temperature effects are likely a factor in the NO sticking efficiency and, therefore, glow intensities.

  3. Sperm head phenotype and male fertility in ram semen.

    PubMed

    Maroto-Morales, A; Ramón, M; García-Álvarez, O; Montoro, V; Soler, A J; Fernández-Santos, M R; Roldan, E R S; Pérez-Guzmán, M D; Garde, J J

    2015-12-01

    Although there is ample evidence for the effects of sperm head shape on sperm function, its impact on fertility has not been explored in detail at the intraspecific level in mammals. Here, we assess the relationship between sperm head shape and male fertility in a large-scale study in Manchega sheep (Ovis aries), which have not undergone any selection for fertility. Semen was collected from 83 mature rams, and before insemination, head shapes were measured for five parameters: area, perimeter, length, width, and p2a (perimeter(2)/2×π×area) using a computer-assisted sperm morphometric analysis. In addition, a cluster analysis using sperm head length and p2a factor was performed to determine sperm subpopulations (SPs) structure. Our results show the existence of four sperm SPs, which present different sperm head phenotype: SP1 (large and round), SP2 (short and elongated), SP3 (shortest and round), and SP4 (large and the most elongated). No relationships were found between males' fertility rates and average values of sperm head dimensions. However, differences in fertility rates between rams were strongly associated to the proportion of spermatozoa in an ejaculate SP with short and elongated heads (P < 0.001). These findings show how the heterogeneity in sperm head shape of the ejaculate has an effect on reproductive success, and highlight the important role of modulation of the ejaculate at the intraspecific level.

  4. Metamaterial Resonant Absorbers for Terahertz Sensing

    DTIC Science & Technology

    2015-12-01

    and their periodic nature , finite element (FE) modeling is the preferable means of designing metamaterials. In order to use metamaterials in sensors ...will incorporate the metamaterial absorber design of this research into a more efficient, cost effective, bi-material THz sensor that can be employed...in a variety of naval applications. 14. SUBJECT TERMS terahertz sensors , metamaterials, uncooled detectors 15. NUMBER OF PAGES 73 16

  5. Metamaterial Absorber Based Multifunctional Sensor Application

    NASA Astrophysics Data System (ADS)

    Ozer, Z.; Mamedov, A. M.; Ozbay, E.

    2017-02-01

    In this study metamaterial based (MA) absorber sensor, integrated with an X-band waveguide, is numerically and experimentally suggested for important application including pressure, density sensing and marble type detecting applications based on rectangular split ring resonator, sensor layer and absorber layer that measures of changing in the dielectric constant and/or the thickness of a sensor layer. Changing of physical, chemical or biological parameters in the sensor layer can be detected by measuring the resonant frequency shifting of metamaterial absorber based sensor. Suggested MA based absorber sensor can be used for medical, biological, agricultural and chemical detecting applications in microwave frequency band. We compare the simulation and experimentally obtained results from the fabricated sample which are good agreement. Simulation results show that the proposed structure can detect the changing of the refractive indexes of different materials via special resonance frequencies, thus it could be said that the MA-based sensors have high sensitivity. Additionally due to the simple and tiny structures it could be adapted to other electronic devices in different sizes.

  6. Energy absorber for the CETA

    NASA Technical Reports Server (NTRS)

    Wesselski, Clarence J.

    1994-01-01

    The energy absorber that was developed for the CETA (Crew Equipment and Translation Aid) on Space Station Freedom is a metal on metal frictional type and has a load regulating feature that prevents excessive stroking loads from occurring while in operation. This paper highlights some of the design and operating aspects and the testing of this energy absorber.

  7. Improvement Of The Helmholtz Absorber

    NASA Technical Reports Server (NTRS)

    Morrow, Duane L.

    1992-01-01

    Helmholtz-resonator system improved to enable it to absorb sound at more than one frequency without appreciable loss of effectiveness at primary frequency. Addition of annular cavities enables absorption of sound at harmonic frequencies in addition to primary frequency. Improved absorber designed for use on structures of high transmission loss. Applied to such machines as fixed-speed engines and fans.

  8. Metal-shearing energy absorber

    NASA Technical Reports Server (NTRS)

    Fay, R. J.; Wittrock, E. P.

    1971-01-01

    Device, consisting of tongue of thin aluminum alloy strip, pull tab, slotted steel plate which serves as cutter, and steel buckle, absorbs mechanical energy when its ends are subjected to tensile loading. Device is applicable as auxiliary shock absorbing anchor for automobile and airplane safety belts.

  9. Structural investigation and microwave characteristics of (Ba{sub 0.2}La{sub 0.8})Fe{sub 0.2}Mn{sub 0.4}Ti{sub 0.4}O{sub 3} absorbing materials

    SciTech Connect

    Manaf, Azwar; Adi, Wisnu Ari

    2014-03-24

    Synthesis and characterization of (Ba{sub 0.2}La{sub 0.8})Fe{sub 0.2}Mn{sub 0.4}Ti{sub 0.4}O{sub 3} absorbing material by mechanical alloying process has been performed. The absorbing material was prepared by oxide materials, namely BaCO{sub 3}, La{sub 2}O{sub 3}, TiO{sub 2}, Fe{sub 2}O{sub 3}, and MnCO{sub 3}. The mixture was milled for 10 h and then sintered at a temperature of 1000 ° C for 10 h. The refinement results of x-ray diffraction pattern of lanthanum manganite substituted with barium showed that the sample consisted of two phases, namely, La{sub 0.9125}MnO{sub 3} phase which has a structure monoclinic (I12/a1) with lattice parameters a = 5.527(1) Å, b = 5.572(1) Å and c = 7.810(1) Å, α = γ = 90° and β = 89.88(5)°, the unit cell volume of V = 240.57(8) Å{sup 3}, and the atomic density of ρ = 6.238 gr.cm{sup −3}. The microstructure analyses showed that the particle shapes was polygonal with the varied particle sizes of 1 ∼ 3 μm distributed homogeneously on the surface of the samples. The results of the electromagnetic wave absorption curve analysis by using a vector network analyzer (VNA) showed that the sample can absorb microwaves in the frequency range of 8-15 GHz with a very wide absorption bandwidth. It indicates that the as prepared absorber presents potential absorbing property in X and Ku-band. We concluded that the (Ba{sub 0.2}La{sub 0.8})Fe{sub 0.2}Mn{sub 0.4}Ti{sub 0.4}O{sub 3} material can be applied as a candidate absorber material of microwaves or electromagnetic wave.

  10. Leaf absorbance and photosynthesis

    NASA Technical Reports Server (NTRS)

    Schurer, Kees

    1994-01-01

    The absorption spectrum of a leaf is often thought to contain some clues to the photosynthetic action spectrum of chlorophyll. Of course, absorption of photons is needed for photosynthesis, but the reverse, photosynthesis when there is absorption, is not necessarily true. As a check on the existence of absorption limits we measured spectra for a few different leaves. Two techniques for measuring absorption have been used, viz. the separate determination of the diffuse reflectance and the diffuse transmittance with the leaf at a port of an integrating sphere and the direct determination of the non-absorbed fraction with the leaf in the sphere. In a cross-check both methods yielded the same results for the absorption spectrum. The spectrum of a Fuchsia leaf, covering the short-wave region from 350 to 2500 nm, shows a high absorption in UV, blue and red, the well known dip in the green and a steep fall-off at 700 nm. Absorption drops to virtually zero in the near infrared, with subsequent absorptions, corresponding to the water absorption bands. In more detailed spectra, taken at 5 nm intervals with a 5 nm bandwidth, differences in chlorophyll content show in the different depths of the dip around 550 nm and in a small shift of the absorption edge at 700 nm. Spectra for Geranium (Pelargonium zonale) and Hibiscus (with a higher chlorophyll content) show that the upper limit for photosynthesis can not be much above 700 nm. No evidence, however, is to be seen of a lower limit for photosynthesis and, in fact, some experiments down to 300 nm still did not show a decrease of the absorption although it is well recognized that no photosynthesis results with 300 nm wavelengths.

  11. Innovative Anti Crash Absorber for a Crashworthy Landing Gear

    NASA Astrophysics Data System (ADS)

    Guida, Michele; Marulo, Francesco; Montesarchio, Bruno; Bruno, Massimiliano

    2014-06-01

    This paper defines an innovative concept to anti-crash absorber in composite material to be integrated on the landing gear as an energy-absorbing device in crash conditions to absorb the impact energy. A composite cylinder tube in carbon fiber material is installed coaxially to the shock absorber cylinder and, in an emergency landing gear condition, collapses in order to enhance the energy absorption performance of the landing system. This mechanism has been developed as an alternative solution to a high-pressure chamber installed on the Agusta A129 CBT helicopter, which can be considered dangerous when the helicopter operates in hard and/or crash landing. The characteristics of the anti-crash device are presented and the structural layout of a crashworthy landing gear adopting the developed additional energy absorbing stage is outlined. Experimental and numerical results relevant to the material characterization and the force peaks evaluation of the system development are reported. The anti-crash prototype was designed, analysed, optimized, made and finally the potential performances of a landing gear with the additional anti-crash absorber system are tested by drop test and then correlated with a similar test without the anti-crash system, showing that appreciable energy absorbing capabilities and efficiencies can be obtained in crash conditions.

  12. Device for absorbing mechanical shock

    DOEpatents

    Newlon, C.E.

    1979-08-29

    This invention is a comparatively inexpensive but efficient shock-absorbing device having special application to the protection of shipping and storage cylinders. In a typical application, two of the devices are strapped to a cylinder to serve as saddle-type supports for the cylinder during storage and to protect the cylinder in the event it is dropped during lifting or lowering operations. In its preferred form, the invention includes a hardwood plank whose grain runs in the longitudinal direction. The basal portion of the plank is of solid cross-section, whereas the upper face of the plank is cut away to form a concave surface fittable against the sidewall of a storage cylinder. The concave surface is divided into a series of segments by transversely extending, throughgoing relief slots. A layer of elastomeric material is positioned on the concave face, the elastomer being extrudable into slots when pressed against the segments by a preselected pressure characteristic of a high-energy impact. The compressive, tensile, and shear properties of the hardwood and the elastomer are utilized in combination to provide a surprisingly high energy-absorption capability.

  13. Device for absorbing mechanical shock

    DOEpatents

    Newlon, Charles E.

    1980-01-01

    This invention is a comparatively inexpensive but efficient shock-absorbing device having special application to the protection of shipping and storage cylinders. In a typical application, two of the devices are strapped to a cylinder to serve as saddle-type supports for the cylinder during storage and to protect the cylinder in the event it is dropped during lifting or lowering operations. In its preferred form, the invention includes a hardwood plank whose grain runs in the longitudinal direction. The basal portion of the plank is of solid cross-section, whereas the upper face of the plank is cut away to form a concave surface fittable against the sidewall of a storage cylinder. The concave surface is divided into a series of segments by transversely extending, throughgoing relief slots. A layer of elastomeric material is positioned on the concave face, the elastomer being extrudable into slots when pressed against the segments by a preselected pressure characteristic of a high-energy impact. The compressive, tensile, and shear properties of the hardwood and the elastomer are utilized in combination to provide a surprisingly high energy-absorption capability.

  14. The utility of nanowater for ram semen cryopreservation.

    PubMed

    Murawski, Maciej; Schwarz, Tomasz; Grygier, Joanna; Patkowski, Krzysztof; Oszczęda, Zdzisław; Jelkin, Igor; Kosiek, Anna; Gruszecki, Tomasz M; Szymanowska, Anna; Skrzypek, Tomasz; Zieba, Dorota A; Bartlewski, Pawel M

    2015-05-01

    Nanowater (NW; water declusterized in the low-temperature plasma reactor) has specific physicochemical properties that could increase semen viability after freezing and hence fertility after artificial insemination (AI) procedures. The main goal of this study was to evaluate ram semen quality after freezing in the media containing NW. Ejaculates from 10 rams were divided into two equal parts, diluted in a commercially available semen extender (Triladyl®; MiniTüb GmbH, Tiefenbach, Germany) prepared with deionized water (DW) or NW, and then frozen in liquid nitrogen. Semen samples were examined for sperm motility and morphology using the sperm class analyzer system and light microscopy. Cryo-scanning electron microscopy (cryo-SEM) was employed to determine the size of extracellular water crystals in frozen semen samples. Survival time at room temperature, aspartate aminotransferase (AspAT) and alkaline phosphatase (ALP) concentrations post-thawing as well as conception/lambing rates after laparoscopic intrauterine AI of 120 ewes were also determined. There were no significant differences between DW and NW groups in sperm progressive motility (26.4 ± 12.2 and 30.8 ± 12.4%) or survival time (266.6 ± 61.3 and 270.9 ± 76.7 min) after thawing and no differences in the percentages of spermatozoa with various morphological defects before or after freezing. There were, however, differences (P < 0.05) in AspAT (DW: 187.1 ± 160.4 vs. NW: 152.7 ± 118.3 U/l) and ALP concentrations (DW: 2198.3 ± 1810.5 vs. NW: 1612.1 ± 1144.8 U/l) in semen samples post-thawing. Extracellular water crystals were larger (P < 0.05) in ejaculates frozen in NW-containing media. Ultrasonographic examinations on day 40 post-AI revealed higher (P < 0.05) conception rates in ewes inseminated with NW (78.3%) compared with DW semen (58.3%), and the percentages of ewes that carried lambs to term were 73.3% and 45.0% in NW and DW groups, respectively (P < 0.01). In summary, the use of a semen

  15. An electromechanical low frequency panel sound absorber.

    PubMed

    Chang, Daoqing; Liu, Bilong; Li, Xiaodong

    2010-08-01

    The sound absorbing properties of a thin micro-perforated plate (MPP) coated with piezoelectric material with shunt damping technology is investigated. First a theoretical model is presented to predict the sound absorption coefficients of a thin plate attached with a piezoelectric patch and electrical circuits. Then the model is extended to analyze the sound absorption for a thin plate with micro perforations and piezoelectric material. Measurements are also carried out in an impedance tube and found to be in good agreements with the theoretical model. The sound absorption of the constructions can be much improved by tuning the electrical circuits.

  16. Experimental results on indoor electromagnetic wave absorber using magnetic wood

    NASA Astrophysics Data System (ADS)

    Oka, Hideo; Narita, Koichi; Osada, Hiroshi; Seki, Kyoushirou

    2002-05-01

    The purpose of this paper is to propose a new type of indoor electromagnetic wave absorber using magnetic wood. This magnetic wood has good electromagnetic wave absorbing characteristics, a low specific gravity, a wood texture and other wood characteristics and can be easily processed. Electromagnetic wave absorbing characteristics were measured for four types of magnetic wood. The sandwich-type magnetic wood demonstrated the best wave absorbing characteristics among the four types of magnetic wood that were studied. The experimental results showed that the proposed indoor electromagnetic wave absorber can be used to suppress the transmission and reception of cellular phone and Personal Handy Phone System (PHS) signals and can be used as a cross protection for indoor wireless Local Area Networks (LAN). This wood can be processed for use in furniture, building materials, and other applications.

  17. Absorbable Antimicrobial Battlefield Hemostat

    DTIC Science & Technology

    2013-04-01

    to graphene sheet and carbon nanotubes . Coupled with ABTS, the GQDs can be used for the detection of hydrogen peroxide with the limit of detection......dressing could be made of any material that is compatible to our coating solvent. Examples include gelatin based and cellulose based substrates. The

  18. Molecular basis of RNA guanine-7 methyltransferase (RNMT) activation by RAM.

    PubMed

    Varshney, Dhaval; Petit, Alain-Pierre; Bueren-Calabuig, Juan A; Jansen, Chimed; Fletcher, Dan A; Peggie, Mark; Weidlich, Simone; Scullion, Paul; Pisliakov, Andrei V; Cowling, Victoria H

    2016-12-01

    Maturation and translation of mRNA in eukaryotes requires the addition of the 7-methylguanosine cap. In vertebrates, the cap methyltransferase, RNA guanine-7 methyltransferase (RNMT), has an activating subunit, RNMT-Activating Miniprotein (RAM). Here we report the first crystal structure of the human RNMT in complex with the activation domain of RAM. A relatively unstructured and negatively charged RAM binds to a positively charged surface groove on RNMT, distal to the active site. This results in stabilisation of a RNMT lobe structure which co-evolved with RAM and is required for RAM binding. Structure-guided mutagenesis and molecular dynamics simulations reveal that RAM stabilises the structure and positioning of the RNMT lobe and the adjacent α-helix hinge, resulting in optimal positioning of helix A which contacts substrates in the active site. Using biophysical and biochemical approaches, we observe that RAM increases the recruitment of the methyl donor, AdoMet (S-adenosyl methionine), to RNMT. Thus we report the mechanism by which RAM allosterically activates RNMT, allowing it to function as a molecular rheostat for mRNA cap methylation.

  19. The RAM Scale: Development and Validation of the Revised Scale in Likert Format.

    ERIC Educational Resources Information Center

    Wright, Claudia R.; And Others

    1983-01-01

    The development and validation of a revised form of the RAM Scale in Likert format are described. The RAM Scale measures student philosophical orientations in terms of relative, absolute, or mixed biases or preferences toward issues of knowledge, methods, and values. (Author/PN)

  20. Effect of semen extender and storage temperature on ram sperm motility over time

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Storage of ram semen for long period of time depends on a number of factors, including type of extender and storage temperature. A study compared the effect of semen extender and storage temperature on motility of ram semen stored for 72 h. Semen collected via electroejaculator from 5 mature Katahd...

  1. Single-Event Effect Response of a Commercial ReRAM

    NASA Technical Reports Server (NTRS)

    Chen, Dakai; Label, Kenneth A.; Kim, Hak; Phan, Anthony; Wilcox, Edward; Buchner, Stephen; Khachatrian, Ani; Roche, Nicolas

    2014-01-01

    We show heavy ion test results of a commercial production-level ReRAM. The memory array is robust to bit upsets. However the ReRAM system is vulnerable to SEFIs due to upsets in peripheral circuits, including the sense amplifier.

  2. Variation in seminal plasma alters the ability of ram spermatozoa to survive cryopreservation.

    PubMed

    Rickard, J P; Schmidt, R E; Maddison, J W; Bathgate, R; Lynch, G W; Druart, X; de Graaf, S P

    2016-03-01

    Variation in the effect of seminal plasma on sperm function and fertility has been hypothesised to be due to differences between males and their seminal plasma composition. The freezing resilience of individual rams (n=17) was investigated to characterise inter-male variation. This was determined by measuring the degree of change in motility induced by cryopreservation (Experiment 1). Experiment 2 examined the effect of pooled seminal plasma from rams identified as having high or low resilience to freezing on the cryosurvival of washed spermatozoa from either high (n=3) or low (n=3) sperm freezing resilience rams. Immediately after thawing and throughout the incubation period (0-4h), spermatozoa from high-resilience rams frozen with high-resilience seminal plasma demonstrated superior motility to spermatozoa from high-resilience rams frozen with low-resilience seminal plasma (P<0.001). Similarly, spermatozoa from low-resilience rams frozen with high-resilience seminal plasma exhibited higher motility than spermatozoa from low-resilience rams frozen with low-resilience seminal plasma immediately after thawing (0h; P<0.001). The present study shows that variation in freezing resilience of ram spermatozoa is related to the source and composition of the seminal plasma.

  3. Molecular basis of RNA guanine-7 methyltransferase (RNMT) activation by RAM

    PubMed Central

    Varshney, Dhaval; Petit, Alain-Pierre; Bueren-Calabuig, Juan A.; Jansen, Chimed; Fletcher, Dan A.; Peggie, Mark; Weidlich, Simone; Scullion, Paul; Pisliakov, Andrei V.; Cowling, Victoria H.

    2016-01-01

    Maturation and translation of mRNA in eukaryotes requires the addition of the 7-methylguanosine cap. In vertebrates, the cap methyltransferase, RNA guanine-7 methyltransferase (RNMT), has an activating subunit, RNMT-Activating Miniprotein (RAM). Here we report the first crystal structure of the human RNMT in complex with the activation domain of RAM. A relatively unstructured and negatively charged RAM binds to a positively charged surface groove on RNMT, distal to the active site. This results in stabilisation of a RNMT lobe structure which co-evolved with RAM and is required for RAM binding. Structure-guided mutagenesis and molecular dynamics simulations reveal that RAM stabilises the structure and positioning of the RNMT lobe and the adjacent α-helix hinge, resulting in optimal positioning of helix A which contacts substrates in the active site. Using biophysical and biochemical approaches, we observe that RAM increases the recruitment of the methyl donor, AdoMet (S-adenosyl methionine), to RNMT. Thus we report the mechanism by which RAM allosterically activates RNMT, allowing it to function as a molecular rheostat for mRNA cap methylation. PMID:27422871

  4. NGC 4438: Ram pressure sweeping of a tidally disrupted galaxy

    NASA Technical Reports Server (NTRS)

    Hibbard, J. E.; Vangorkom, Jacqueline H.

    1990-01-01

    NGC 4438 is the highly HI deficient peculiar spiral in the center of the Virgo cluster. Observations are given of the neutral hydrogen emission obtained with the Very Large Array (VLA) in the D-array configuration. These observations map out the total HI as determined from single dish measurements, and show the hydrogen to be confined to a region about one third the size of the optical disk and displaced to the side of the galaxy opposite M87. The hydrogen content of the galaxy is over an order of magnitude less than that expected for a galaxy of its type. The data suggest that the HI deficiency is a result of ram pressure stripping of the gas in the outer regions of the galaxy by the hot intracluster medium after being tidally perturbed.

  5. High spatial resolution measurements of ram accelerator gas dynamic phenomena

    NASA Technical Reports Server (NTRS)

    Hinkey, J. B.; Burnham, E. A.; Bruckner, A. P.

    1992-01-01

    High spatial resolution experimental tube wall pressure measurements of ram accelerator gas dynamic phenomena are presented. The projectile resembles the centerbody of a ramjet and travels supersonically through a tube filled with a combustible gaseous mixture, with the tube acting as the outer cowling. Pressure data are recorded as the projectile passes by sensors mounted in the tube wall at various locations along the tube. Data obtained by using a special highly instrumented section of tube has allowed the recording of gas dynamic phenomena with a spatial resolution on the order of one tenth the projectile length. High spatial resolution tube wall pressure data from the three regimes of propulsion studied to date (subdetonative, transdetonative, and superdetonative) are presented and reveal the 3D character of the flowfield induced by projectile fins and the canting of the projectile body relative to the tube wall. Also presented for comparison to the experimental data are calculations made with an inviscid, 3D CFD code.

  6. Chemical forms of selenium present in rat and ram spermatozoa.

    PubMed

    Alabi, N S; Beilstein, M A; Whanger, P D

    2000-08-01

    In vivo and in vitro studies were conducted to investigate the chemical forms by ion-exchange chromatography of selenium (Se) present in rat and ovine spermatozoa. After injection with 75Se-selenite, the form of 75Se in rat sperm was selenocysteine, but selenocysteine and selenomethionine (SeMet) were present in ovine sperm. Presumably, synthesis of SeMet by rumen microbes are responsible for its presence in ovine sperm. In vitro incubation of ram sperm with selenocysteine or SeMet produced no changes, but incubation with selenite produced a compound that eluted one fraction before SeMet from the ion-exchange column. After treatment of this fraction with mercaptoethanol, it eluted in a later fraction upon rechromatography, suggesting it to be selenodicysteine. This compound is apparently formed because of high levels of cysteine in semen. Cysteine, reduced glutathione, and oxidized glutathione were also found in semen. The significance of the results is discussed.

  7. Ram acceleration from a two phase detonative system

    NASA Technical Reports Server (NTRS)

    Cambier, Jean-Luc; Bogdanoff, David W.

    1993-01-01

    A concept for ram acceleration is presented here, which uses a combination of a gas core and a layer of solid explosive or propellant to generate high thrust densities. The concept can be either self-synchronized or externally synchronized, and may be reusable. It has the potential to achieve very high acceleration rates, higher exit velocities and to lower the tube length requirements. Preliminary numerical simulations are presented and discussed, which show the characteristics of the flow fields. Stable conditions can be achieved for low mass loadings of solid explosive, and relatively slow combustion. Accurate knowledge of the thermo-chemical properties and the equations of state of the gas and solid components is essential for further tuning of the concept.

  8. RAM analysis helps cut turbine-generator systems costs

    SciTech Connect

    Cockerill, A.W. ); Lavoie, M. )

    1990-07-01

    Maintenance is effective when it improves equipment availability and reduces costs. Reduced costs stem from increased availability, which is the primary objective of this study. As a result, overall operating costs decrease. RAM analysis requires a logical approach to the problem through the use of techniques such as FMEA, FTA and goal trees. To illustrate the steps of this method, the authors used a simplified T-G system. This method is to rank critical components in terms of the severity of failure. On the basis of ranking, it is possible to assign the preventive maintenance tasks in order of priority. Other options are available. Examples are revised procedures, more detailed outage plans using PC-based programs and better spare parts management.

  9. NGC 3312: A victim of ram pressure sweeping

    NASA Technical Reports Server (NTRS)

    Mcmahon, P. M.; Richter, O.-G.; Vangorkom, Jacqueline H.; Ferguson, H. C.

    1990-01-01

    Researchers are undertaking a volume limited survey of the Hydra I cluster in neutral hydrogen using the National Radio Astronomy Observatory's Very Large Array (VLA). The main purpose is to study the effects of a dense environment on the gaseous component of the galaxies. Observational evidence has been accumulating recently that ram pressure sweeping does occur in the centers of clusters, but it is possible that tidal interactions play a role as well. Results of high resolution HI imaging of NGC 3312, the large peculiar spiral near the cluster center are presented. Hydra I (= A1060) is the nearest rich cluster beyond Virgo and, as such, presents a unique opportunity to do a complete survey of a cluster. It is similar to the Virgo cluster in many of its general physical characteristics, such as size, x ray luminosity, velocity dispersion, and galaxy content (high spiral fraction). However, Hydra I appears to be more regular and relaxed. This is evident in the x ray distribution in its central region, which is radially symmetric and centered on the dominant galaxy, NGC 3311, a cD-like elliptical. The observed x ray luminosity implies a central gas density of 4.5 x 10 to the 3rd power cm(-3). Gallagher (1978) argued from optical images of NGC 3312 that this galaxy might be an ideal candidate to directly study effects of the ram pressure process; it might currently be undergoing stripping of its interstellar medium. The researchers' data are consistent with this suggestion, but other origins of the peculiar appearance cannot yet be ruled out.

  10. Ram Pressure Stripping and Morphological Transformation in the Coma Cluster

    NASA Astrophysics Data System (ADS)

    Gregg, Michael; West, Michael

    2017-01-01

    The two largest spiral galaxies in the Coma cluster, NGC4911 and NGC4921, exhibit signs of being vigorously ram-pressure stripped by the hot intracluster medium. HST ACS and WFC3 images have revealed galactic scale shock fronts, giant "Pillars of Creation", rivulets of dust, and spatially coherent star formation in these grand design spirals. All evidence points to these galaxies being stressed by a global external source which can only be the hot intracluster medium (ICM). Inspired by these examples, we have obtained HST WFC3 imaging of five additional large spirals to search for and investigate the effects of ram pressure stripping across the wider Coma cluster. The results are equally spectacular as the first two examples. The geometry of the interactions in some cases allows us to estimate the various time scales involved, including gas flows out of the disk leading to creation of the ICM, and the attendant triggered star formation in the galaxy disks. The global star formation patterns and wholesale tidal stripping of matter yield insights into the spatial and temporal ISM-ICM interactions driving the evolution of galaxies in clusters and ultimately transforming their morphologies from spiral to S0. These processes, much more common in the early Universe, led to the wholesale morphological transformation of Hubble types during the assembly of rich clusters, when the intergalactic populations and hot ICM were first being created and laid down from such stripping and destruction of their member galaxies.We also report on two instrumental aspects of WFC3: 1) using the filter pair F350LP and F600LP to create an extremely broad pseudo Blue-Red color to achieve the greatest observing efficiency with HST, and 2) a WFC3 CCD effect which leads to apparent quantization of background counts, making automatic sky determination challenging when using drizzlepac routines.

  11. NGC 3312: A victim of Ram pressure sweeping

    NASA Astrophysics Data System (ADS)

    McMahon, P. M.; Richter, O.-G.; van Gorkom, Jacqueline H.; Ferguson, H. C.

    1990-07-01

    Researchers are undertaking a volume limited survey of the Hydra I cluster in neutral hydrogen using the National Radio Astronomy Observatory's Very Large Array (VLA). The main purpose is to study the effects of a dense environment on the gaseous component of the galaxies. Observational evidence has been accumulating recently that ram pressure sweeping does occur in the centers of clusters, but it is possible that tidal interactions play a role as well. Results of high resolution HI imaging of NGC 3312, the large peculiar spiral near the cluster center are presented. Hydra I (= A1060) is the nearest rich cluster beyond Virgo and, as such, presents a unique opportunity to do a complete survey of a cluster. It is similar to the Virgo cluster in many of its general physical characteristics, such as size, x ray luminosity, velocity dispersion, and galaxy content (high spiral fraction). However, Hydra I appears to be more regular and relaxed. This is evident in the x ray distribution in its central region, which is radially symmetric and centered on the dominant galaxy, NGC 3311, a cD-like elliptical. The observed x ray luminosity implies a central gas density of 4.5 x 10 to the 3rd power cm(-3). Gallagher (1978) argued from optical images of NGC 3312 that this galaxy might be an ideal candidate to directly study effects of the ram pressure process; it might currently be undergoing stripping of its interstellar medium. The researchers' data are consistent with this suggestion, but other origins of the peculiar appearance cannot yet be ruled out.

  12. Design of a ram accelerator mass launch system

    NASA Technical Reports Server (NTRS)

    Aarnio, Michael; Armerding, Calvin; Berschauer, Andrew; Christofferson, Erik; Clement, Paul; Gohd, Robin; Neely, Bret; Reed, David; Rodriguez, Carlos; Swanstrom, Fredrick

    1988-01-01

    The ram accelerator mass launch system has been proposed to greatly reduce the costs of placing acceleration-insensitive payloads into low earth orbit. The ram accelerator is a chemically propelled, impulsive mass launch system capable of efficiently accelerating relatively large masses from velocities of 0.7 km/sec to 10 km/sec. The principles of propulsion are based on those of a conventional supersonic air-breathing ramjet; however the device operates in a somewhat different manner. The payload carrying vehicle resembles the center-body of the ramjet and accelerates through a stationary tube which acts as the outer cowling. The tube is filled with premixed gaseous fuel and oxidizer mixtures that burn in the vicinity of the vehicle's base, producing a thrust which accelerates the vehicle through the tube. This study examines the requirement for placing a 2000 kg vehicle into a 500 km circular orbit with a minimum amount of on-board rocket propellant for orbital maneuvers. The goal is to achieve a 50 pct payload mass fraction. The proposed design requirements have several self-imposed constraints that define the vehicle and tube configurations. Structural considerations on the vehicle and tube wall dictate an upper acceleration limit of 1000 g's and a tube inside diameter of 1.0 m. In-tube propulsive requirements and vehicle structural constraints result in a vehicle diameter of 0.76 m, a total length of 7.5 m and a nose-cone half angle of 7 degrees. An ablating nose-cone constructed from carbon-carbon composite serves as the thermal protection mechanism for atmospheric transit.

  13. Parallel finite element simulation of large ram-air parachutes

    NASA Astrophysics Data System (ADS)

    Kalro, V.; Aliabadi, S.; Garrard, W.; Tezduyar, T.; Mittal, S.; Stein, K.

    1997-06-01

    In the near future, large ram-air parachutes are expected to provide the capability of delivering 21 ton payloads from altitudes as high as 25,000 ft. In development and test and evaluation of these parachutes the size of the parachute needed and the deployment stages involved make high-performance computing (HPC) simulations a desirable alternative to costly airdrop tests. Although computational simulations based on realistic, 3D, time-dependent models will continue to be a major computational challenge, advanced finite element simulation techniques recently developed for this purpose and the execution of these techniques on HPC platforms are significant steps in the direction to meet this challenge. In this paper, two approaches for analysis of the inflation and gliding of ram-air parachutes are presented. In one of the approaches the point mass flight mechanics equations are solved with the time-varying drag and lift areas obtained from empirical data. This approach is limited to parachutes with similar configurations to those for which data are available. The other approach is 3D finite element computations based on the Navier-Stokes equations governing the airflow around the parachute canopy and Newtons law of motion governing the 3D dynamics of the canopy, with the forces acting on the canopy calculated from the simulated flow field. At the earlier stages of canopy inflation the parachute is modelled as an expanding box, whereas at the later stages, as it expands, the box transforms to a parafoil and glides. These finite element computations are carried out on the massively parallel supercomputers CRAY T3D and Thinking Machines CM-5, typically with millions of coupled, non-linear finite element equations solved simultaneously at every time step or pseudo-time step of the simulation.

  14. Preference of redear sunfish on zebra mussels and rams-horn snails

    USGS Publications Warehouse

    French, John R. P.; Morgan, Michael N.

    1995-01-01

    We tested prey preferences of adult (200- to 222-mm long) redear sunfish (Lepomis microlophus) on two size classes of zebra mussels (Dreissena polymorpha) and two-ridge rams-horns (Helisoma anceps) in experimental aquaria. We also tested physical limitations on consuming these mollusks and determined prey bioenergetic profitability. Redear sunfish strongly preferred rams-horns over zebra mussels, but they displayed no size preference for either prey. Ingestion was not physically limited since both prey species up to 15-mm long fit within the pharyngeal gapes of redear sunfish. Rams-horns were more bioenergetically profitable than zebra mussels and ingestion of rams-horn shell fragments was about three times less than zebra mussels. Rams-horns were somewhat more resistant to shell-crushing, but all size ranges of both prey species tested were crushable by redear sunfish. These studies suggested that the redear sunfish should not be considered a panacea for biological control of zebra mussels.

  15. Impact of oxygen exchange reaction at the ohmic interface in Ta2O5-based ReRAM devices.

    PubMed

    Kim, Wonjoo; Menzel, Stephan; Wouters, Dirk J; Guo, Yuzheng; Robertson, John; Roesgen, Bernd; Waser, Rainer; Rana, Vikas

    2016-10-20

    Interface reactions constitute essential aspects of the switching mechanism in redox-based resistive random access memory (ReRAM). For example, the modulation of the electronic barrier height at the Schottky interface is considered to be responsible for the toggling of the resistance states. On the other hand, the role of the ohmic interface in the resistive switching behavior is still ambigious. In this paper, the impact of different ohmic metal-electrode (M) materials, namely W, Ta, Ti, and Hf on the characteristics of Ta2O5 ReRAM is investigated. These materials are chosen with respect to their free energy for metal oxide formation and, associated, their impact on the formation energy of oxygen vacancy defects at the M/Ta2O5 interface. The resistive switching devices with Ti and Hf electrodes that have a negative defect formation energy, show an early RESET failure during the switching cycles. This failure process with Ti and Hf electrode is attributed to the accumulation of oxygen vacancies in the Ta2O5 layer, which leads to permanent breakdown of the metal-oxide to a low resistive state. In contrast, the defect formation energy in the Ta2O5 with respect to Ta and W electrodes is positive and for those highly stable resistive switching behavior is observed. During the quasi-static and transient-pulse characterization, the ReRAM devices with the W electrode consistently show an increased high resistance state (HRS) than with the Ta electrode for all RESET stop voltages. This effect is attributed to the faster oxygen exchange reaction at the W-electrode interface during the RESET process in accordance to lower stability of WO3 than Ta2O5. Based on these findings, an advanced resistive switching model, wherein also the oxygen exchange reaction at the ohmic M-electrode interface plays a vital role in determining of the resistance states, is presented.

  16. An introduction to absorbent dressings.

    PubMed

    Jones, Menna Lloyd

    2014-12-01

    Exudate bathes the wound bed with a serous fluid that contains essential components that promote wound healing. However, excess exudate is often seen as a challenge for clinicians. Absorbent dressings are often used to aid in the management of exudate, with the aim of providing a moist but unmacerated environment. With so many different types of absorbent dressings available today-alongside making a holistic assessment-it is essential that clinicians also have the knowledge and skill to select the most appropriate absorbent dressing for a given patient.

  17. Self-Regulating Shock Absorber

    NASA Technical Reports Server (NTRS)

    Wesselski, Clarence J.

    1995-01-01

    Mechanical shock absorber keeps frictional damping force within tolerable limit. Its damping force does not increase with coefficient of friction between energy-absorbing components; rather, frictional damping force varies only slightly. Relatively insensitive to manufacturing variations and environmental conditions altering friction. Does not exhibit high breakaway friction and consequent sharp increase followed by sharp decrease in damping force at beginning of stroking. Damping force in absorber does not vary appreciably with speed of stroking. In addition, not vulnerable to leakage of hydraulic fluid.

  18. Unglazed transpired solar collector having a low thermal-conductance absorber

    DOEpatents

    Christensen, Craig B.; Kutscher, Charles F.; Gawlik, Keith M.

    1997-01-01

    An unglazed transpired solar collector using solar radiation to heat incoming air for distribution, comprising an unglazed absorber formed of low thermal-conductance material having a front surface for receiving the solar radiation and openings in the unglazed absorber for passage of the incoming air such that the incoming air is heated as it passes towards the front surface of the absorber and the heated air passes through the openings in the absorber for distribution.

  19. Unglazed transpired solar collector having a low thermal-conductance absorber

    DOEpatents

    Christensen, C.B.; Kutscher, C.F.; Gawlik, K.M.

    1997-12-02

    An unglazed transpired solar collector using solar radiation to heat incoming air for distribution, comprises an unglazed absorber formed of low thermal-conductance material having a front surface for receiving the solar radiation and openings in the unglazed absorber for passage of the incoming air such that the incoming air is heated as it passes towards the front surface of the absorber and the heated air passes through the openings in the absorber for distribution. 3 figs.

  20. Imaging highly absorbing nanoparticles using photothermal microscopy

    NASA Astrophysics Data System (ADS)

    Lussier, Simon-Alexandre; Moradi, Hamid; Price, Alain; Murugkar, Sangeeta

    2015-03-01

    Gold nanoparticles (NPs) have tremendous potential in biomedicine. They can be used as absorbing labels inside living cells for the purpose of biomedical imaging, biosensing as well as for photothermal therapy. We demonstrate photothermal imaging of highly-absorbing particles using a pump-probe setup. The photothermal signal is recovered by heterodyne detection, where the excitation pump laser is at 532 nm and the probe laser is at 638 nm. The sample is moved by a scanning stage. Proof of concept images of red polystyrene microspheres and gold nanoparticles are obtained with this home-built multimodal microscope. The increase in temperature at the surface of the gold NPs, due to the pump laser beam, can be directly measured by means of this photothermal microscope and then compared with the results from theoretical predictions. This technique will be useful for characterization of nanoparticles of different shapes, sizes and materials that are used in cancer diagnosis and therapy.

  1. Impedance matched thin metamaterials make metals absorbing

    PubMed Central

    Mattiucci, N.; Bloemer, M. J.; Aközbek, N.; D'Aguanno, G.

    2013-01-01

    Metals are generally considered good reflectors over the entire electromagnetic spectrum up to their plasma frequency. Here we demonstrate an approach to tailor their absorbing characteristics based on the effective metamaterial properties of thin, periodic metallo-dielectric multilayers by exploiting a broadband, inherently non-resonant, surface impedance matching mechanism. Based on this mechanism, we design, fabricate and test omnidirectional, thin (<1 micron), polarization independent, extremely efficient absorbers (in principle being capable to reach A > 99%) over a frequency range spanning from the UV to the IR. Our approach opens new venues to design cost effective materials for many applications such as thermo-photovoltaic energy conversion devices, light harvesting for solar cells, flat panel display, infrared detectors, stray light reduction, stealth and others. PMID:24220284

  2. Accelerated life testing of solar absorber coatings

    NASA Astrophysics Data System (ADS)

    Carlsson, Bo; Moeller, K.; Frei, Ulrich; Koehl, Michael

    1994-09-01

    Results from a comprehensive case study on accelerated life testing of some selective solar collector absorber coatings for DHW systems are reviewed. The study was conducted within Task X `Solar Materials Research and Development' of the IEA Solar Heating and Cooling Program from 1987 to 1992 and is unique due to its quantitative and systematic approach for durability assessment. The work of case study involved the development of both experimental and theoretical tools to aid the assessment of service life or absorber coatings. This entailed performance analysis, failure analysis, microclimate characterization, environmental resistance testing and life date analysis. Predicted in-service degradation of coatings from accelerated life testing was found to be in fairly good agreement both qualitatively and quantitatively with what was actually observed on coatings installed and tested for three years in solar collectors working under typical DHW conditions.

  3. Disposable Diaper Absorbency: Improvements via Advanced Designs.

    PubMed

    Helmes, C Tucker; O'Connor, Robert; Sawyer, Larry; Young, Sharon

    2014-08-01

    Absorbency effectiveness in diapers has improved significantly in recent years with the advent of new ingredient combinations and advanced design features. With these features, many leading products maintain their dryness performance overnight. Considering the importance of holding liquid away from the skin, ongoing research in diaper construction focuses on strategies to increase the effectiveness to capture liquid and help avoid rewetting of infant skin. The layout and design of a disposable diaper allows for distribution of absorbency features where they can provide the optimal benefit. Clinical evidence indicates materials can keep moisture away from the skin in the diapered area, helping maintain proper skin hydration, minimizing irritation, and contributing to reduced rates of diaper rash.

  4. Effects of ram speed on prey capture kinematics of juvenile Indo-Pacific tarpon, Megalops cyprinoides.

    PubMed

    Tran, Hoang Q; Mehta, Rita S; Wainwright, Peter C

    2010-03-01

    We examined the effects of variation in swimming speed, or 'ram speed', on the feeding kinematics of juvenile Indo-Pacific tarpon, Megalops cyprinoides. Tarpon were filmed feeding on non-elusive prey at 500 images s(-1). Prey items were offered at one end of the filming tank, the opposite end where tarpon grouped, to encourage them to use a ram strategy to capture their prey. We describe tarpon as ram-suction feeders. Ram speed varied among strikes from 0.19 to 1.38 m/s and each individual produced speeds that spanned at least 0.9 m/s across trials. Although suction distances were much less variable, prey movement towards the predator was present in all feeding trials. There was a strong positive relationship between initial predator - prey distance and ram speed (r(2)=0.72, P<0.001). When tarpon initiated their strike from further away, they achieved higher ram speeds, but also took longer to capture their prey. All other timing variables were unaffected by ram speed whereas at higher ram speeds tarpon exhibited greater expansion of the mouth and buccal cavity. Greater buccal expansion accomplished in the same period of time implies that both the total volume of water captured and the water flow rate entering the mouth was greater in strikes at higher ram speeds. Our results demonstrate how feeding kinematics may vary as a function of ram speed, and how fish predators that lack jaw protrusion and have a large gape capacity can maximize their feeding success by altering their swimming speed.

  5. Energy deposition studies for the LBNE beam absorber

    SciTech Connect

    Rakhno, Igor L.; Mokhov, Nikolai V.; Tropin, Igor S.

    2015-01-29

    Results of detailed Monte Carlo energy deposition studies performed for the LBNE absorber core and the surrounding shielding with the MARS15 code are described. The model of the entire facility, that includes a pion-production target, focusing horns, target chase, decay channel, hadron absorber system – all with corresponding radiation shielding – was developed using the recently implemented ROOT-based geometry option in the MARS15 code. This option provides substantial flexibility and automation when developing complex geometry models. Both normal operation and accidental conditions were studied. Various design options were considered, in particular the following: (i) filling the decay pipe with air or helium; (ii) the absorber mask material and shape; (iii) the beam spoiler material and size. Results of detailed thermal calculations with the ANSYS code helped to select the most viable absorber design options.

  6. Controlling optical absorption in metamaterial absorbers for plasmonic solar cells

    NASA Astrophysics Data System (ADS)

    Adams, Wyatt; Vora, Ankit; Gwamuri, Jephias; Pearce, Joshua M.; Güney, Durdu Ö.

    2015-08-01

    Metals in the plasmonic metamaterial absorbers for photovoltaics constitute undesired resistive heating. However, tailoring the geometric skin depth of metals can minimize resistive losses while maximizing the optical absorbance in the active semiconductors of the photovoltaic device. Considering experimental permittivity data for InxGa1-xN, absorbance in the semiconductor layers of the photovoltaic device can reach above 90%. The results here also provides guidance to compare the performance of different semiconductor materials. This skin depth engineering approach can also be applied to other optoelectronic devices, where optimizing the device performance demands minimizing resistive losses and power consumption, such as photodetectors, laser diodes, and light emitting diodes.

  7. Optimization of the acoustic absorption coefficients of certain functional absorbents

    NASA Technical Reports Server (NTRS)

    Pocsa, V.; Biborosch, L.; Veres, A.; Halpert, E.; Lorian, R.; Botos, T.

    1974-01-01

    The sound absorption coefficients of some functional absorbents (mineral wool plates) are determined by the reverberation chamber method. The influence of the angle of inclination of the sound absorbing material with respect to the surface to be treated is analyzed as well as the influence of the covering index, defined as the ratio of the designed area of a plate and the area of the treated surface belonging to another plate. As compared with the conventional method of applying sound-absorbing plates, the analyzed structures have a higher technological and economical efficiency. The optimum structure corresponds to an angle of inclination of 15 deg and a covering index of 0.8.

  8. Metamaterial perfect absorber based on artificial dielectric "atoms".

    PubMed

    Liu, Xiaoming; Bi, Ke; Li, Bo; Zhao, Qian; Zhou, Ji

    2016-09-05

    In this work, we numerically designed and then experimentally verified a metamaterial perfect absorber based on artificial dielectric "atoms". This metamaterial absorber is composed of dielectric ceramic material (SrTiO3) "atoms" embedded in a background matrix on a metal plate. The dielectric "atoms" couple strongly to the incident electric and magnetic fields at the Mie resonance mode, leading to the narrow perfect absorption band with simulated and experimental absorptivities of 99% and 98.5% at 8.96 GHz, respectively. The designed metamaterial perfect absorber is polarization insensitive and can operate in wide angle incidence.

  9. Spontaneous emission and absorber theory

    NASA Astrophysics Data System (ADS)

    Pegg, David T.

    1997-01-01

    One of the long term interests of George Series was the construction of a theory of spontaneous emission which does not involve field quantisation. His approach was written in terms of atomic operators only and he drew a parallel with the Wheeler-Feynman absorber theory of radiation. By making a particular extra postulate, he was able to obtain the correct spontaneous emission rate and the Lamb shift reasonably simply and directly. An examination of his approach indicates that this postulate is physically reasonable and the need for it arises because quantisation in his theory occurs after the response of the absorber has been accounted for by means of the radiative reaction field. We review briefly an alternative absorber theory approach to spontaneous emission based on the direct action between the emitting atom and a quantised absorber, and outline some applications to more recent effects of interest in quantum optics.

  10. Countercurrent flow absorber and desorber

    DOEpatents

    Wilkinson, W.H.

    1984-10-16

    Countercurrent flow absorber and desorber devices are provided for use in absorption cycle refrigeration systems and thermal boosting systems. The devices have increased residence time and surface area resulting in improved heat and mass transfer characteristics. The apparatuses may be incorporated into open cycle thermal boosting systems in which steam serves both as the refrigerant vapor which is supplied to the absorber section and as the supply of heat to drive the desorber section of the system. 9 figs.

  11. Countercurrent flow absorber and desorber

    DOEpatents

    Wilkinson, William H.

    1984-01-01

    Countercurrent flow absorber and desorber devices are provided for use in absorption cycle refrigeration systems and thermal boosting systems. The devices have increased residence time and surface area resulting in improved heat and mass transfer characteristics. The apparatuses may be incorporated into open cycle thermal boosting systems in which steam serves both as the refrigerant vapor which is supplied to the absorber section and as the supply of heat to drive the desorber section of the system.

  12. Perfect selective metamaterial solar absorbers.

    PubMed

    Wang, Hao; Wang, Liping

    2013-11-04

    In this work, we numerically investigate the radiative properties of metamaterial nanostructures made of two-dimensional tungsten gratings on a thin dielectric spacer and an opaque tungsten film from UV to mid-infrared region as potential selective solar absorbers. The metamaterial absorber with single-sized tungsten patches exhibits high absorptance in the visible and near-infrared region due to several mechanisms such as surface plasmon polaritons, magnetic polaritons, and intrinsic bandgap absorption of tungsten. Geometric effects on the resonance wavelengths and the absorptance spectra are studied, and the physical mechanisms are elucidated in detail. The absorptance could be further enhanced in a broader spectral range with double-sized metamaterial absorbers. The total solar absorptance of the optimized metamaterial absorbers at normal incidence could be more than 88%, while the total emittance is less than 3% at 100°C, resulting in total photon-to-heat conversion efficiency of 86% without any optical concentration. Moreover, the metamaterial solar absorbers exhibit quasi-diffuse behaviors as well as polarization independence. The results here will facilitate the design of novel highly efficient solar absorbers to enhance the performance of various solar energy conversion systems.

  13. 76 FR 49834 - Notice of Receipt of Petition for Decision That Nonconforming 2009 Dodge RAM 1500 Laramie Crew...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-11

    ... Nonconforming 2009 Dodge RAM 1500 Laramie Crew Cab Trucks Manufactured for the Mexican Market Are Eligible for... a petition for a decision that 2009 Dodge RAM 1500 Laramie Crew Cab trucks manufactured for the Mexican market (2009 Dodge RAM 1500 Mexican trucks), that were not originally manufactured to comply...

  14. Absorbing WIPP brines : a TRU waste disposal strategy.

    SciTech Connect

    Yeamans, D. R.; Wright, R.

    2002-01-01

    Los Alamos National Laboratory (LANL) has completed experiments involving 15 each, 250-liter experimental test containers of transuranic (TRU) heterogeneous waste immersed in two types of brine similar to those found in the underground portion of the Waste Isolation Pilot Plant (WIPP). To dispose of the waste without removing the brine from the test containers, LANL added commercially available cross-linked polyacrylate granules to absorb the 190 liters of brine in each container, making the waste compliant for shipping to the WlPP in a Standard Waste Box (SWB). Prior to performing the absorption, LANL and the manufacturer of the absorbent conducted laboratory and field tests to determine the ratio of absorbent to brine that would fully absorb the liquid. Bench scale tests indicated a ratio of 10 parts Castile brine to one part absorbent and 6.25 parts Brine A to one part absorbent. The minimum ratio of absorbent to brine was sought because headspace in the containers was limited. However, full scale testing revealed that the ratio should be adjusted to be about 15% richer in absorbent. Additional testing showed that the absorbent would not apply more than 13.8 kPa pressure on the walls of the vessel and that the absorbent would still function normally at that pressure and would not degrade in the approximately 5e-4 Sv/hr radioactive field produced by the waste. Heat generation from the absorption was minimal. The in situ absorption created a single waste stream of 8 SWBs whereas the least complicated alternate method of disposal would have yielded at least an additional 2600 liters of mixed low level liquid waste plus about two cubic meters of mixed low level solid waste, and would have resulted in higher risk of radiation exposure to workers. The in situ absorption saved $3 1 lk in a combination of waste treatment, disposal, material and personnel costs compared to the least expensive alternative and $984k compared to the original plan.

  15. ABSORBING WIPP BRINES: A TRU WASTE DISPOSAL STRATEGY

    SciTech Connect

    Yeamans, D. R.; Wrights, R. S.

    2002-02-25

    Los Alamos National Laboratory (LANL) has completed experiments involving 15 each, 250- liter experimental test containers of transuranic (TRU) heterogeneous waste immersed in two types of brine similar to those found in the underground portion of the Waste Isolation Pilot Plant (WIPP). To dispose of the waste without removing the brine from the test containers, LANL added commercially available cross-linked polyacrylate granules to absorb the 190 liters of brine in each container, making the waste compliant for shipping to the WIPP in a Standard Waste Box (SWB). Prior to performing the absorption, LANL and the manufacturer of the absorbent conducted laboratory and field tests to determine the ratio of absorbent to brine that would fully absorb the liquid. Bench scale tests indicated a ratio of 10 parts Castile brine to one part absorbent and 6.25 parts Brine A to one part absorbent. The minimum ratio of absorbent to brine was sought because headspace in the containers was limited. However, full scale testing revealed that the ratio should be adjusted to be about 15% richer in absorbent. Additional testing showed that the absorbent would not apply more than 13.8 kPa pressure on the walls of the vessel and that the absorbent would still function normally at that pressure and would not degrade in the approximately 5e-4 Sv/hr radioactive field produced by the waste. Heat generation from the absorption was minimal. The in situ absorption created a single waste stream of 8 SWBs whereas the least complicated alternate method of disposal would have yielded at least an additional 2600 liters of mixed low level liquid waste plus about two cubic meters of mixed low level solid waste, and would have resulted in higher risk of radiation exposure to workers. The in situ absorption saved $311k in a combination of waste treatment, disposal, material and personnel costs compared to the least expensive alternative and $984k compared to the original plan.

  16. Dissecting and circumventing the requirement for RAM in CSL-dependent Notch signaling.

    PubMed

    Johnson, Scott E; Barrick, Douglas

    2012-01-01

    The Notch signaling pathway is an intercellular communication network vital to metazoan development. Notch activation leads to the nuclear localization of the intracellular portion (NICD) of the Notch receptor. Once in the nucleus, NICD binds the transcription factor CSL through a bivalent interaction involving the high-affinity RAM region and the lower affinity ANK domain, converting CSL from a transcriptionally-repressed to an active state. This interaction is believed to directly displace co-repressor proteins from CSL and recruit co-activator proteins. Here we investigate the consequences of this bivalent organization in converting CSL from the repressed to active form. One proposed function of RAM is to promote the weak ANK:CSL interaction; thus, fusion of CSL-ANK should bypass this function of RAM. We find that a CSL-ANK fusion protein is transcriptionally active in reporter assays, but that the addition of RAM in trans further increases transcriptional activity, suggesting another role of RAM in activation. A single F235L point substitution, which disrupts co-repressor binding to CSL, renders the CSL-ANK fusion fully active and refractory to further stimulation by RAM in trans. These results suggest that in the context of a mammalian CSL-ANK fusion protein, the main role of RAM is to displace co-repressor proteins from CSL.

  17. Role of the RAM Network in Cell Polarity and Hyphal Morphogenesis in Candida albicans

    PubMed Central

    Song, Yunkyoung; Cheon, Seon Ah; Lee, Kyung Eun; Lee, So-Yeon; Lee, Byung-Kyu; Oh, Doo-Byung; Kang, Hyun Ah

    2008-01-01

    RAM (regulation of Ace2p transcription factor and polarized morphogenesis) is a conserved signaling network that regulates polarized morphogenesis in yeast, worms, flies, and humans. To investigate the role of the RAM network in cell polarity and hyphal morphogenesis of Candida albicans, each of the C. albicans RAM genes (CaCBK1, CaMOB2, CaKIC1, CaPAG1, CaHYM1, and CaSOG2) was deleted. All C. albicans RAM mutants exhibited hypersensitivity to cell-wall- or membrane-perturbing agents, exhibiting cell-separation defects, a multinucleate phenotype and loss of cell polarity. Yeast two-hybrid and in vivo functional analyses of CaCbk1p and its activator, CaMob2p, the key factors in the RAM network, demonstrated that the direct interaction between the SMA domain of CaCbk1p and the Mob1/phocein domain of CaMob2p was necessary for hyphal growth of C. albicans. Genome-wide transcription profiling of a Camob2 mutant suggested that the RAM network played a role in serum- and antifungal azoles–induced activation of ergosterol biosynthesis genes, especially those involved in the late steps of ergosterol biosynthesis, and might be associated, at least indirectly, with the Tup1p-Nrg1p pathway. Collectively, these results demonstrate that the RAM network is critically required for hyphal growth as well as normal vegetative growth in C. albicans. PMID:18843050

  18. Theoretical Performance Model and Initial Experimentation of a Baffled-Tube Ram Accelerator

    NASA Astrophysics Data System (ADS)

    Glusman, Jeffrey F.

    The baffled-tube ram accelerator is an innovation in hypervelocity launch technology that allows the acceleration of axisymmetric projectiles in the velocity range of 500 to 3000 meters per second. This device has the potential to double the thrust performance of the conventional smooth-bore ram accelerator while reducing its minimum starting velocity. The baffled-tube ram accelerator utilizes a series of internal baffles to suppress the forward surge of a combustion driven shock wave, thus enabling operation in propellants having two to three times the energy release of those used with conventional smooth-bore ram accelerators. An experimental and theoretical investigation of this device is currently on-going at the University of Washington. Operation at velocities between 620 and 1220 meters per second has been demonstrated to date. Theoretical modeling indicates that momentum loss due to baffle interactions is a key factor in the baffled-tube ram accelerator, which reduces its performance. Nevertheless, baffled-tube experiments have demonstrated thrusts 30-100% greater than that of a smooth-bore ram accelerator operating at the same fill pressure. The design, modeling, and experimental results from a 38-mm-bore, two-meter-long baffled-tube ram accelerator apparatus are presented.

  19. Hubble space telescope imaging of decoupled dust clouds in the ram pressure stripped Virgo spirals NGC 4402 and NGC 4522

    SciTech Connect

    Abramson, Anne; Kenney, Jeffrey D. P. E-mail: jeff.kenney@yale.edu

    2014-03-01

    We present the highest-resolution study to date of the interstellar medium (ISM) in galaxies undergoing ram pressure stripping, using Hubble Space Telescope BVI imaging of NGC 4522 and NGC 4402, Virgo Cluster spirals that are well known to be experiencing intracluster medium (ICM) ram pressure. We find that throughout most of both galaxies, the main dust lane has a fairly well-defined edge, with a population of giant molecular cloud (GMC) sized (tens- to hundreds-of-pc scale), isolated, highly extincting dust clouds located up to ∼1.5 kpc radially beyond it. Outside of these dense clouds, the area has little or no diffuse dust extinction, indicating that the clouds have decoupled from the lower-density ISM material that has already been stripped. Several of the dust clouds have elongated morphologies that indicate active ram pressure, including two large (kpc scale) filaments in NGC 4402 that are elongated in the projected ICM wind direction. We calculate a lower limit on the H I + H{sub 2} masses of these clouds based on their dust extinctions and find that a correction factor of ∼10 gives cloud masses consistent with those measured in CO for clouds of similar diameters, probably due to the complicating factors of foreground light, cloud substructure, and resolution limitations. Assuming that the clouds' actual masses are consistent with those of GMCs of similar diameters (∼10{sup 4}-10{sup 5} M {sub ☉}), we estimate that only a small fraction (∼1%-10%) of the original H I + H{sub 2} remains in the parts of the disks with decoupled clouds. Based on Hα images, a similar fraction of star formation persists in these regions, 2%-3% of the estimated pre-stripping star formation rate. We find that the decoupled cloud lifetimes may be up to 150-200 Myr.

  20. Protective effect of silymarin on viability, motility and mitochondrial membrane potential of ram sperm treated with sodium arsenite

    PubMed Central

    Eskandari, Farzaneh; Momeni, Hamid Reza

    2016-01-01

    Background: Sodium arsenite can impair male reproductive function by inducing oxidative stress. Silymarin is known as a potent antioxidant. Objective: This study was performed to investigate if silymarin can prevent the adverse effect of sodium arsenite on ram sperm viability, motility and mitochondrial membrane potential. Materials and Methods: Epidydimal spermatozoa obtained from ram were divided into five groups: 1) Spermatozoa at 0 hr, 2) spermatozoa at 180 min (control), 3) spermatozoa treated with sodium arsenite (10 μM) for 180 min, 4) spermatozoa treated with silymarin (20 μM) + sodium arsenite (10 μM) for 180 min and 5) spermatozoa treated with silymarin (20 μM) for 180 min. MTT assay and Rhodamine 123 staining were used to assess sperm viability and mitochondrial membrane potential respectively. Sperm motility was performed according to World Health Organization (WHO) guidelines. Results: Viability (p<0.01), nonprogressive motility (p<0.001) and intact mitochondrial membrane potential (p<0.001) of the spermatozoa were significantly decreased in sodium arsenite treated group compared to control group. In silymarin + sodium arsenite group, silymarin could significantly reverse the adverse effect of sodium arsenite on these sperm parameters compared to sodium arsenite group (p<0.001). In addition, the application of silymarin alone for 180 minutes could significantly increase progressively motile sperm (p<0.001) and decrease non motile sperm (p<0.01) compared to the control. Conclusion: Silymarin could compensate the adverse effect of sodium arsenite on viability, nonprogressive motility and mitochondrial membrane potential of ram sperm. PMID:27525323

  1. THE MAGELLANIC STREAM SYSTEM. I. RAM-PRESSURE TAILS AND THE RELICS OF THE COLLISION BETWEEN THE MAGELLANIC CLOUDS

    SciTech Connect

    Hammer, F.; Yang, Y. B.; Flores, H.; Puech, M.; Fouquet, S.

    2015-11-10

    We have analyzed the Magellanic Stream (MS) using the deepest and the most resolved H i survey of the Southern Hemisphere (the Galactic All-Sky Survey). The overall Stream is structured into two filaments, suggesting two ram-pressure tails lagging behind the Magellanic Clouds (MCs), and resembling two close, transonic, von Karman vortex streets. The past motions of the Clouds appear imprinted in them, implying almost parallel initial orbits, and then a radical change after their passage near the N(H i) peak of the MS. This is consistent with a recent collision between the MCs, 200–300 Myr ago, which has stripped their gas further into small clouds, spreading them out along a gigantic bow shock, perpendicular to the MS. The Stream is formed by the interplay between stellar feedback and the ram pressure exerted by hot gas in the Milky Way (MW) halo with n{sub h} = 10{sup −4} cm{sup −3} at 50–70 kpc, a value necessary to explain the MS multiphase high-velocity clouds. The corresponding hydrodynamic modeling provides the currently most accurate reproduction of the whole H i Stream morphology, of its velocity, and column density profiles along L{sub MS}. The “ram pressure plus collision” scenario requires tidal dwarf galaxies, which are assumed to be the Cloud and dSph progenitors, to have left imprints in the MS and the Leading Arm, respectively. The simulated LMC and SMC have baryonic mass, kinematics, and proper motions consistent with observations. This supports a novel paradigm for the MS System, which could have its origin in material expelled toward the MW by the ancient gas-rich merger that formed M31.

  2. The "Ram Effect": A "Non-Classical" Mechanism for Inducing LH Surges in Sheep.

    PubMed

    Fabre-Nys, Claude; Chanvallon, Audrey; Dupont, Joëlle; Lardic, Lionel; Lomet, Didier; Martinet, Stéphanie; Scaramuzzi, Rex J

    2016-01-01

    During spring sheep do not normally ovulate but exposure to a ram can induce ovulation. In some ewes an LH surge is induced immediately after exposure to a ram thus raising questions about the control of this precocious LH surge. Our first aim was to determine the plasma concentrations of oestradiol (E2) E2 in anoestrous ewes before and after the "ram effect" in ewes that had a "precocious" LH surge (starting within 6 hours), a "normal" surge (between 6 and 28h) and "late» surge (not detected by 56h). In another experiment we tested if a small increase in circulating E2 could induce an LH surge in anoestrus ewes. The concentration of E2 significantly was not different at the time of ram introduction among ewes with the three types of LH surge. "Precocious" LH surges were not preceded by a large increase in E2 unlike "normal" surges and small elevations of circulating E2 alone were unable to induce LH surges. These results show that the "precocious" LH surge was not the result of E2 positive feedback. Our second aim was to test if noradrenaline (NA) is involved in the LH response to the "ram effect". Using double labelling for Fos and tyrosine hydroxylase (TH) we showed that exposure of anoestrous ewes to a ram induced a higher density of cells positive for both in the A1 nucleus and the Locus Coeruleus complex compared to unstimulated controls. Finally, the administration by retrodialysis into the preoptic area, of NA increased the proportion of ewes with an LH response to ram odor whereas treatment with the α1 antagonist Prazosin decreased the LH pulse frequency and amplitude induced by a sexually active ram. Collectively these results suggest that in anoestrous ewes NA is involved in ram-induced LH secretion as observed in other induced ovulators.

  3. Shock wave absorber having a deformable liner

    DOEpatents

    Youngdahl, C.K.; Wiedermann, A.H.; Shin, Y.W.; Kot, C.A.; Ockert, C.E.

    1983-08-26

    This invention discloses a shock wave absorber for a piping system carrying liquid. The absorber has a plastically deformable liner defining the normal flow boundary for an axial segment of the piping system, and a nondeformable housing is spaced outwardly from the liner so as to define a gas-tight space therebetween. The flow capacity of the liner generally corresponds to the flow capacity of the piping system line, but the liner has a noncircular cross section and extends axially of the piping system line a distance between one and twenty times the diameter thereof. Gas pressurizes the gas-tight space equal to the normal liquid pressure in the piping system. The liner has sufficient structural capacity to withstand between one and one-half and two times this normal liquid pressures; but at greater pressures it begins to plastically deform initially with respect to shape to a more circular cross section, and then with respect to material extension by circumferentially stretching the wall of the liner. A high energy shock wave passing through the liner thus plastically deforms the liner radially into the gas space and progressively also as needed in the axial direction of the shock wave to minimize transmission of the shock wave beyond the absorber.

  4. Microscopic modeling of nitride intersubband absorbance

    NASA Astrophysics Data System (ADS)

    Montano, Ines; Allerman, A. A.; Wierer, J. J.; Moseley, M.; Skogen, E. J.; Tauke-Pedretti, A.; Vawter, G. A.

    III-nitride intersubband structures have recently attracted much interest because of their potential for a wide variety of applications ranging from electro-optical modulators to terahertz quantum cascade lasers. To overcome present simulation limitations we have developed a microscopic absorbance simulator for nitride intersubband devices. Our simulator calculates the band structure of nitride intersubband systems using a fully coupled 8x8 k.p Hamiltonian and determines the material response of a single period in a density-matrix-formalism by solving the Heisenberg equation including many-body and dephasing contributions. After calculating the polarization due to intersubband transitions in a single period, the resulting absorbance of a superlattice structure including radiative coupling between the different periods is determined using a non-local Green's-function formalism. As a result our simulator allows us to predict intersubband absorbance of superlattice structures with microscopically determined lineshapes and linewidths accounting for both many-body and correlation contributions. This work is funded by Sandia National Laboratories Laboratory Directed Research and Development program. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin.

  5. Load limiting energy absorbing lightweight debris catcher

    NASA Technical Reports Server (NTRS)

    Kahn, Jon B. (Inventor); Schneider, William C. (Inventor)

    1991-01-01

    In the representative embodiment of the invention disclosed, a load limiting, energy absorbing net is arranged to overlay a normally-covered vent opening in the rear bulkhead of the space orbiter vehicle. Spatially-disposed flexible retainer straps are extended from the net and respectively secured to bulkhead brackets spaced around the vent opening. The intermediate portions of the straps are doubled over and stitched together in a pattern enabling the doubled-over portions to progressively separate at a predicable load designed to be well below the tensile capability of the straps as the stitches are successively torn apart by the forces imposed on the retainer members whenever the cover plate is explosively separated from the bulkhead and propelled into the net. By arranging these stitches to be successively torn away at a load below the strap strength in response to forces acting on the retainers that are less than the combined strength of the retainers, this tearing action serves as a predictable compact energy absorber for safely halting the cover plate as the retainers are extended as the net is deployed. The invention further includes a block of an energy-absorbing material positioned in the net for receiving loose debris produced by the explosive release of the cover plate.

  6. Absorption-induced scattering and surface plasmon out-coupling from absorber-coated plasmonic metasurfaces

    PubMed Central

    Petoukhoff, Christopher E.; O'Carroll, Deirdre M.

    2015-01-01

    Interactions between absorbers and plasmonic metasurfaces can give rise to unique optical properties not present for either of the individual materials and can influence the performance of a host of optical sensing and thin-film optoelectronic applications. Here we identify three distinct mode types of absorber-coated plasmonic metasurfaces: localized and propagating surface plasmons and a previously unidentified optical mode type called absorption-induced scattering. The extinction of the latter mode type can be tuned by controlling the morphology of the absorber coating and the spectral overlap of the absorber with the plasmonic modes. Furthermore, we show that surface plasmons are backscattered when the crystallinity of the absorber is low but are absorbed for more crystalline absorber coatings. This work furthers our understanding of light–matter interactions between absorbers and surface plasmons to enable practical optoelectronic applications of metasurfaces. PMID:26271900

  7. Expansion tube experiments for the investigation of ram-accelerator-related combustion and gasdynamic problems

    NASA Astrophysics Data System (ADS)

    Srulijes, J.; Smeets, G.; Seiler, F.

    1992-07-01

    By means of a specially devised expansion tube, it has proven possible to accelerate an explosive gas mixture to a superdetonative, ram-accelerator-type velocity without autoignition. By reducing the driver length, a gas flow of decreasing velocity was generated; this allowed detailed observations of the sub-, trans-, and superdetonative regimes to be conducted in a simple experiment. In addition to aiding ram accelerator-related research, this method will help optimize the operating parameters of 30 mm and 90 mm ram accelerator test facilities that are currently under construction.

  8. Model-Based RAMS & FDIR Co-Engineering at Astrium Satellites

    NASA Astrophysics Data System (ADS)

    Thomas, Dave; Blanquart, Jean-Paul

    2013-08-01

    This paper presents the new model-based process developed within Astrium Satellites in order to support and improve RAMS & FDIR Co-Engineering. The first part of the paper focuses on the proposed RAMS & FDIR model-based process and its objectives. The second part analyses the needs and depicts the specific requirements that the modelling language and the tool(s) have to meet in order to support fully such a process in an industrial context. Finally the third section describes current implementation within Astrium Satellites where an overall RAMS / FDIR Modelling Framework has been developed and is being pushed into operation.

  9. Recent developments of smart electromagnetic absorbers based polymer-composites at gigahertz frequencies

    NASA Astrophysics Data System (ADS)

    Idris, Fadzidah Mohd.; Hashim, Mansor; Abbas, Zulkifly; Ismail, Ismayadi; Nazlan, Rodziah; Ibrahim, Idza Riati

    2016-05-01

    The rapid increase in electromagnetic interference has received a serious attention from researchers who responded by producing a variety of radar absorbing materials especially at high gigahertz frequencies. Ongoing investigation is being carried out in order to find the best absorbing materials which can fulfill the requirements for smart absorbing materials which are lightweight, broad bandwidth absorption, stronger absorption etc. Thus, to improve the absorbing capability, several important parameters need to be taken into consideration such as filler type, loading level, type of polymer matrix, physical thickness, grain sizes, layers and bandwidth. Therefore, this article introduces the electromagnetic wave absorption mechanisms and then reveals and reviews those parameters that enhance the absorption performance.

  10. Fabrication of THz Sensor with Metamaterial Absorber

    NASA Astrophysics Data System (ADS)

    Gonzalez, Hugo; Alves, Fabio; Karunasiri, Gamani

    The terahertz (THz) portion of the electromagnetic spectrum (0.1-10 THz) has not been fully utilized due to the lack of sensitive detectors. Real-time imaging in this spectral range has been demonstrated using uncooled infrared microbolometer cameras and external illumination provided by quantum cascade laser (QCL) based THz sources. However, the microbolometer pixels in the cameras have not been optimized to achieve high sensitivity in THz frequencies. Recently, we have developed a highly sensitive micromechanical THz sensor employing bi-material effect with an integrated metamaterial absorber tuned to the THz frequency of interest. The use of bi-material structures causes deflection on the sensor to as the absorbed THz radiation increases its temperature, which can be monitored optically by reflecting a light beam. This approach eliminates the integration of readout electronics needed in microbolometers. The absorption of THz by metamaterial can be tailored by controlling geometrical parameters. The sensors can be fabricated using conventional microelectronic materials and incorporated into pixels to form focal plane arrays (FPAs). In this presentation, characterization and readout of a THz sensor with integrated metamaterial structure will be described. Supported by DoD.

  11. Exposure testing of solar absorber surfaces

    SciTech Connect

    Moore, S.W.

    1986-01-01

    The Los Alamos National Laboratory has been involved in supporting, monitoring and conducting exposure testing of solar materials for approximately ten years. The Laboratory has provided technical monitoring of the IITRI, DSET, Lockheed, and Berry contracts and has operated the Los Alamos exposure Facility for over five years. This report will outline some of the past exposure testing, the testing still in progress, and describe some of the major findings. While this report will primarily emphasize solar absorber surfaces, some of the significant findings relative to advanced glazing will be discussed.

  12. Piston-rotaxanes as molecular shock absorbers.

    PubMed

    Sevick, E M; Williams, D R M

    2010-04-20

    We describe the thermomechanical response of a new molecular system that behaves as a shock absorber. The system consists of a rodlike rotaxane connected to a piston and tethered to a surface. The response of this system is dominated by the translational entropy of the rotaxane rings and can be calculated exactly. The force laws are contrasted with those for a rigid rod and a polymer. In some cases, the rotaxanes undergo a sudden transition to a tilted state when compressed. These piston-rotaxanes provide a potential motif for the design of a new class of materials with a novel thermomechanical response.

  13. A novel broadband waterborne acoustic absorber

    NASA Astrophysics Data System (ADS)

    Wang, Changxian; Wen, Weibin; Huang, Yixing; Chen, Mingji; Lei, Hongshuai; Fang, Daining

    2016-07-01

    In this paper, we extended the ray tracing theory in polar coordinate system, and originally proposed the Snell-Descartes law in polar coordinates. Based on these theories, a novel broadband waterborne acoustic absorber device was proposed. This device is designed with gradient-distributing materials along radius, which makes the incidence acoustic wave ray warps. The echo reduction effects of this device were investigated by finite element analysis, and the numerical results show that the reflectivity of acoustic wave for the new device is lower than that of homogenous and Alberich layers in almost all frequency 0-30 kHz at the same loss factor.

  14. Read disturb errors in a CMOS static RAM chip

    NASA Astrophysics Data System (ADS)

    Wood, Steven H.; Marr, James C., IV; Nguyen, Tien T.; Padgett, Dwayne J.; Tran, Joe C.; Griswold, Thomas W.; Lebowitz, Daniel C.

    Results are reported from an extensive investigation into pattern-sensitive soft errors (read disturb errors) in the TCC244 CMOS static RAM chip. The TCC244, also known as the SA2838, is a radiation-hard single-event-upset-resistant 4 x 256 memory chip. This device is being used by the Jet Propulsion Laboratory in the Galileo and Magellan spacecraft, which will have encounters with Jupiter and Venus, respectively. Two aspects of the part's design are shown to result in the occurrence of read disturb errors: the transparence of the signal path from the address pins to the array of cells, and the large resistance in the Vdd and Vss lines of the cells in the center of the array. Probe measurements taken during a read disturb failure illustrate how address skews and the data pattern in the chip combine to produce a bit flip. A capacitive charge pump formed by the individual cell capacitances and the resistance in the supply lines pumps down both the internal cell voltage and the local supply voltage until a bit flip occurs.

  15. Compact and High Thrust Air Turbo Ram Engine

    NASA Astrophysics Data System (ADS)

    Hasegawa, Hiroaki; Kitahara, Kazuki; Inukai, Yasuo

    The Air Turbo Ramjet (ATR) is a combined cycle engine which performs like a turbojet engine at subsonic speeds and a ramjet at supersonic speeds and therefore the ATR is an attractive propulsion system for the wide operation range (e.g. Mach 0 to Mach 4). The ATR can provide a higher specific impulse than a solid fuel rocket engine and a higher thrust per frontal area than a turbojet engine. The major ATR components are the inlet, fan (compressor), turbine, gas generator, combustor and exhaust nozzle. In the ATR, the turbine drive gas is generated by a decomposed liquid or solid fuel gas generator. In order to carry heavier payloads and to attain shorter flight time, the compact and high thrust engine is required. In this study, the ram combustor with the double-staged flameholders and the fan with tandem blade were introduced to shorten the engine length and to increase the fan pressure ratio, respectively. Furthermore, the engine testing was carried out on sea level static condition to confirm the engine component integration technologies for the ATR propulsion system.

  16. Mushroom plasmonic metamaterial infrared absorbers

    SciTech Connect

    Ogawa, Shinpei Fujisawa, Daisuke; Hata, Hisatoshi; Uetsuki, Mitsuharu; Misaki, Koji; Kimata, Masafumi

    2015-01-26

    There has been a considerable amount of interest in the development of various types of electromagnetic wave absorbers for use in different wavelength ranges. In particular, infrared (IR) absorbers with wavelength selectivity can be applied to advanced uncooled IR sensors, which would be capable of identifying objects through their radiation spectrum. In the present study, mushroom plasmonic metamaterial absorbers (MPMAs) for the IR wavelength region were designed and fabricated. The MPMAs consist of a periodic array of thin metal micropatches connected to a thin metal plate with narrow silicon (Si) posts. A Si post height of 200 nm was achieved by isotropic XeF{sub 2} etching of a thin Si layer sandwiched between metal plates. This fabrication procedure is relatively simple and is consistent with complementary metal oxide semiconductor technology. The absorption spectra of the fabricated MPMAs were experimentally measured. In addition, theoretical calculations of their absorption properties were conducted using rigorous coupled wave analysis. Both the calculated and measured absorbance results demonstrated that these MPMAs can realize strong selective absorption at wavelengths beyond the period of the array by varying the micropatch width. Absorbance values greater than 90% were achieved. Dual- or single-mode absorption can also be selected by varying the width of the Si posts. Pixel structures using such MPMAs could be used as high responsivity, high resolution and fast uncooled IR sensors.

  17. Mushroom plasmonic metamaterial infrared absorbers

    NASA Astrophysics Data System (ADS)

    Ogawa, Shinpei; Fujisawa, Daisuke; Hata, Hisatoshi; Uetsuki, Mitsuharu; Misaki, Koji; Kimata, Masafumi

    2015-01-01

    There has been a considerable amount of interest in the development of various types of electromagnetic wave absorbers for use in different wavelength ranges. In particular, infrared (IR) absorbers with wavelength selectivity can be applied to advanced uncooled IR sensors, which would be capable of identifying objects through their radiation spectrum. In the present study, mushroom plasmonic metamaterial absorbers (MPMAs) for the IR wavelength region were designed and fabricated. The MPMAs consist of a periodic array of thin metal micropatches connected to a thin metal plate with narrow silicon (Si) posts. A Si post height of 200 nm was achieved by isotropic XeF2 etching of a thin Si layer sandwiched between metal plates. This fabrication procedure is relatively simple and is consistent with complementary metal oxide semiconductor technology. The absorption spectra of the fabricated MPMAs were experimentally measured. In addition, theoretical calculations of their absorption properties were conducted using rigorous coupled wave analysis. Both the calculated and measured absorbance results demonstrated that these MPMAs can realize strong selective absorption at wavelengths beyond the period of the array by varying the micropatch width. Absorbance values greater than 90% were achieved. Dual- or single-mode absorption can also be selected by varying the width of the Si posts. Pixel structures using such MPMAs could be used as high responsivity, high resolution and fast uncooled IR sensors.

  18. Carbon Absorber Retrofit Equipment (CARE)

    SciTech Connect

    Klein, Eric

    2015-12-23

    During Project DE-FE0007528, CARE (Carbon Absorber Retrofit Equipment), Neumann Systems Group (NSG) designed, installed and tested a 0.5MW NeuStream® carbon dioxide (CO2) capture system using the patented NeuStream® absorber equipment and concentrated (6 molal) piperazine (PZ) as the solvent at Colorado Springs Utilities’ (CSU’s) Martin Drake pulverized coal (PC) power plant. The 36 month project included design, build and test phases. The 0.5MW NeuStream® CO2 capture system was successfully tested on flue gas from both coal and natural gas combustion sources and was shown to meet project objectives. Ninety percent CO2 removal was achieved with greater than 95% CO2product purity. The absorbers tested support a 90% reduction in absorber volume compared to packed towers and with an absorber parasitic power of less than 1% when configured for operation with a 550MW coal plant. The preliminary techno-economic analysis (TEA) performed by the Energy and Environmental Research Center (EERC) predicted an over-the-fence cost of $25.73/tonne of CO2 captured from a sub-critical PC plant.

  19. Process for separating and/or recovering hydrocarbon oils from water using biodegradable absorbent sponges

    SciTech Connect

    Mueller, M.B.; Mareau, K.J.

    1991-08-13

    This patent describes an improved process for absorbing oils selected from the group consisting of hydrocarbon oils and hydrocarbon fuels. It comprises the step of contacting the oils with an absorbent oleophilic biodegradable sponge material comprised of at least one essentially fat free, foamed, biodegradable natural product selected from the group consisting of animal proteins and plant polymaccharides, which material is capable of absorbing at least about thirty times its weight of oils.

  20. Efficacy of long-acting oxytetracycline alone or in combination with streptomycin for treatment of Brucella ovis infection of rams.

    PubMed

    Marín, C M; Jiménez de Bagués, M P; Barberán, M; Blasco, J M

    1989-04-01

    Twenty-four rams inoculated with Brucella ovis by conjunctival and preputial routes were treated with a long-acting oxytetracycline alone or in combination with dihydrostreptomycin sulfate. The combined treatment eliminated Brucella ovis from 11 of 12 (91.6%) treated rams. Only 4 of 12 (33.3%) rams treated with oxytetracycline alone were bacteriologically negative. Neither treatment resolved clinical epididymitis in 2 rams affected before treatment. Many rams had pathologic lesions in the epididymis and ampullae, which limited the efficacy of antibiotic treatment.

  1. Metamaterial Absorber for Electromagnetic Waves in Periodic Water Droplets

    NASA Astrophysics Data System (ADS)

    Yoo, Young Joon; Ju, Sanghyun; Park, Sang Yoon; Ju Kim, Young; Bong, Jihye; Lim, Taekyung; Kim, Ki Won; Rhee, Joo Yull; Lee, Youngpak

    2015-09-01

    Perfect metamaterial absorber (PMA) can intercept electromagnetic wave harmful for body in Wi-Fi, cell phones and home appliances that we are daily using and provide stealth function that military fighter, tank and warship can avoid radar detection. We reported new concept of water droplet-based PMA absorbing perfectly electromagnetic wave with water, an eco-friendly material which is very plentiful on the earth. If arranging water droplets with particular height and diameter on material surface through the wettability of material surface, meta-properties absorbing electromagnetic wave perfectly in GHz wide-band were shown. It was possible to control absorption ratio and absorption wavelength band of electromagnetic wave according to the shape of water droplet-height and diameter- and apply to various flexible and/or transparent substrates such as plastic, glass and paper. In addition, this research examined how electromagnetic wave can be well absorbed in water droplets with low electrical conductivity unlike metal-based metamaterials inquiring highly electrical conductivity. Those results are judged to lead broad applications to variously civilian and military products in the future by providing perfect absorber of broadband in all products including transparent and bendable materials.

  2. Metamaterial Absorber for Electromagnetic Waves in Periodic Water Droplets

    PubMed Central

    Yoo, Young Joon; Ju, Sanghyun; Park, Sang Yoon; Ju Kim, Young; Bong, Jihye; Lim, Taekyung; Kim, Ki Won; Rhee, Joo Yull; Lee, YoungPak

    2015-01-01

    Perfect metamaterial absorber (PMA) can intercept electromagnetic wave harmful for body in Wi-Fi, cell phones and home appliances that we are daily using and provide stealth function that military fighter, tank and warship can avoid radar detection. We reported new concept of water droplet-based PMA absorbing perfectly electromagnetic wave with water, an eco-friendly material which is very plentiful on the earth. If arranging water droplets with particular height and diameter on material surface through the wettability of material surface, meta-properties absorbing electromagnetic wave perfectly in GHz wide-band were shown. It was possible to control absorption ratio and absorption wavelength band of electromagnetic wave according to the shape of water droplet–height and diameter– and apply to various flexible and/or transparent substrates such as plastic, glass and paper. In addition, this research examined how electromagnetic wave can be well absorbed in water droplets with low electrical conductivity unlike metal-based metamaterials inquiring highly electrical conductivity. Those results are judged to lead broad applications to variously civilian and military products in the future by providing perfect absorber of broadband in all products including transparent and bendable materials. PMID:26354891

  3. Metamaterial Absorber for Electromagnetic Waves in Periodic Water Droplets.

    PubMed

    Yoo, Young Joon; Ju, Sanghyun; Park, Sang Yoon; Ju Kim, Young; Bong, Jihye; Lim, Taekyung; Kim, Ki Won; Rhee, Joo Yull; Lee, YoungPak

    2015-09-10

    Perfect metamaterial absorber (PMA) can intercept electromagnetic wave harmful for body in Wi-Fi, cell phones and home appliances that we are daily using and provide stealth function that military fighter, tank and warship can avoid radar detection. We reported new concept of water droplet-based PMA absorbing perfectly electromagnetic wave with water, an eco-friendly material which is very plentiful on the earth. If arranging water droplets with particular height and diameter on material surface through the wettability of material surface, meta-properties absorbing electromagnetic wave perfectly in GHz wide-band were shown. It was possible to control absorption ratio and absorption wavelength band of electromagnetic wave according to the shape of water droplet-height and diameter- and apply to various flexible and/or transparent substrates such as plastic, glass and paper. In addition, this research examined how electromagnetic wave can be well absorbed in water droplets with low electrical conductivity unlike metal-based metamaterials inquiring highly electrical conductivity. Those results are judged to lead broad applications to variously civilian and military products in the future by providing perfect absorber of broadband in all products including transparent and bendable materials.

  4. Thin Perfect Absorbers for Electromagnetic Waves: Theory, Design, and Realizations

    NASA Astrophysics Data System (ADS)

    Ra'di, Y.; Simovski, C. R.; Tretyakov, S. A.

    2015-03-01

    With recent advances in nanophotonics and nanofabrication, considerable progress has been achieved in realizations of thin composite layers designed for full absorption of incident electromagnetic radiation, from microwaves to the visible. If the layer is structured at a subwavelength scale, thin perfect absorbers are usually called "metamaterial absorbers," because these composite structures are designed to emulate some material responses not reachable with any natural material. On the other hand, many thin absorbing composite layers were designed and used already in the time of the introduction of radar technology, predominantly as a means to reduce radar visibility of targets. In view of a wide variety of classical and new topologies of optically thin metamaterial absorbers and plurality of applications, there is a need for a general, conceptual overview of the fundamental mechanisms of full absorption of light or microwave radiation in thin layers. Here, we present such an overview in the form of a general theory of thin perfectly absorbing layers. Possible topologies of perfect metamaterial absorbers are classified based on their fundamental operational principles. For each of the identified classes, we provide design equations and give examples of particular realizations. The concluding section provides a summary and gives an outlook on future developments in this field.

  5. All-Silicon Ultra-Broadband Infrared Light Absorbers

    PubMed Central

    Gorgulu, Kazim; Gok, Abdullah; Yilmaz, Mehmet; Topalli, Kagan; Bıyıklı, Necmi; Okyay, Ali K.

    2016-01-01

    Absorbing infrared radiation efficiently is important for critical applications such as thermal imaging and infrared spectroscopy. Common infrared absorbing materials are not standard in Si VLSI technology. We demonstrate ultra-broadband mid-infrared absorbers based purely on silicon. Broadband absorption is achieved by the combined effects of free carrier absorption, and vibrational and plasmonic absorption resonances. The absorbers, consisting of periodically arranged silicon gratings, can be fabricated using standard optical lithography and deep reactive ion etching techniques, allowing for cost-effective and wafer-scale fabrication of micro-structures. Absorption wavebands in excess of 15 micrometers (5–20 μm) are demonstrated with more than 90% average absorptivity. The structures also exhibit broadband absorption performance even at large angles of incidence (θ = 50°), and independent of polarization. PMID:27924933

  6. Magnetically tunable metamaterial perfect absorber

    NASA Astrophysics Data System (ADS)

    Lei, Ming; Feng, Ningyue; Wang, Qingmin; Hao, Yanan; Huang, Shanguo; Bi, Ke

    2016-06-01

    A magnetically tunable metamaterial perfect absorber (MPA) based on ferromagnetic resonance is experimentally and numerically demonstrated. The ferrite-based MPA is composed of an array of ferrite rods and a metallic ground plane. Frequency dependent absorption of the ferrite-based MPA under a series of applied magnetic fields is discussed. An absorption peak induced by ferromagnetic resonance appears in the range of 8-12 GHz under a certain magnetic field. Both the simulated and experimental results demonstrate that the absorption frequency of the ferrite-based MPA can be tuned by the applied magnetic field. This work provides an effective way to fabricate the magnetically tunable metamaterial perfect absorber.

  7. Adaptive inertial shock-absorber

    NASA Astrophysics Data System (ADS)

    Faraj, Rami; Holnicki-Szulc, Jan; Knap, Lech; Seńko, Jarosław

    2016-03-01

    This paper introduces and discusses a new concept of impact absorption by means of impact energy management and storage in dedicated rotating inertial discs. The effectiveness of the concept is demonstrated in a selected case-study involving spinning management, a recently developed novel impact-absorber. A specific control technique performed on this device is demonstrated to be the main source of significant improvement in the overall efficiency of impact damping process. The influence of various parameters on the performance of the shock-absorber is investigated. Design and manufacturing challenges and directions of further research are formulated.

  8. Design of wide bandwidth pyramidal microwave absorbers using ferrite composites with broad magnetic loss spectra

    NASA Astrophysics Data System (ADS)

    Park, Myung-Jun; Kim, Sung-Soo

    2016-09-01

    Wide bandwidth microwave absorbers with a pyramidal shape and a significantly reduced thickness can be designed using high lossy ferrite materials with broad magnetic loss spectra. The microwave absorbing properties of pyramidal cone absorbers are analyzed using the transmission line approximation, which provides the reflection loss as a function of the material parameters and absorber geometry. Three types of ferrite materials (NiZn spinel ferrite, Co2Z hexaferrite, and RuCoM hexaferrite) are used as the absorbent fillers in a rubber matrix. Among these, Co2Z ferrite is the most suitable material for wide bandwidth pyramidal absorbers, due to its broad magnetic loss spectrum in the GHz frequency range. The optimal geometry of the pyramidal absorber is also determined using the transmission line theory. With the reduced total height of the pyramidal absorber (approximately 60 mm), a wide bandwidth (1.5-18 GHz with respect to the -20 dB reflection loss) can be realized. The proposed absorbers have a thickness advantage over the classical pyramidal ohmic absorbers; thus, they are suitable for small and semi-anechoic chambers.

  9. Effect of vane opening on aerodynamic performance of the ram-rotor test system

    NASA Astrophysics Data System (ADS)

    Han, Ji-ang; Guan, Jian; Zhong, Jingjun; Yuan, Chenguang

    2016-06-01

    In order to research the influence of adjustable vane on the aerodynamic performance of the ram-rotor test system, FLUENT software has been adopted to simulate the flow passage of the ram-rotor test system numerically. The vane opening is controlled by changing the stagger angle of the vane blades. Results show that flow uniformity of vane outlet is influenced by the vane openings, which has an impact on the aerodynamic loss to some extent. Total pressure ratio, adiabatic efficiency and mass flow rate can be regulated by different openings of the vane. Compared with -8° vane opening, top efficiency of the ram-rotor increases by about 13.8% at +6° opening. And total pressure ratio drops by 5.87%. The rising opening increases the relative Mach number at inlet of the ram-rotor and weakens the intensity of the tip clearance leakage, which comes to a decreasing aerodynamic loss.

  10. Reliable Acquisition of RAM Dumps from Intel-Based Apple Mac Computers over FireWire

    NASA Astrophysics Data System (ADS)

    Gladyshev, Pavel; Almansoori, Afrah

    RAM content acquisition is an important step in live forensic analysis of computer systems. FireWire offers an attractive way to acquire RAM content of Apple Mac computers equipped with a FireWire connection. However, the existing techniques for doing so require substantial knowledge of the target computer configuration and cannot be used reliably on a previously unknown computer in a crime scene. This paper proposes a novel method for acquiring RAM content of Apple Mac computers over FireWire, which automatically discovers necessary information about the target computer and can be used in the crime scene setting. As an application of the developed method, the techniques for recovery of AOL Instant Messenger (AIM) conversation fragments from RAM dumps are also discussed in this paper.

  11. Thermal-induced phase-change ODS and photo-excited bistable state-change DVD-RAM

    NASA Astrophysics Data System (ADS)

    Rong, Ailun; Huang, De-yin; Lu, Yanwu; Zhang, Zhonglin; Shi, Luqing; Wang, Rui

    1996-09-01

    High density and high data rate are two key points in the development of ODS (optical data storage) which has advanced remarkably in recent years. The aim of this contribution is to report on the migration from CD-E to DVD-RAM by changing: 1) the recording media from heat-mode material to photo-mode material, 2) the recording laser from near infrared to green or blue wavelength, and 3) the recording methods from CD- format to sectorial format and from PPM-RLL to PWM-RLL, where PPM and PWM are pulse position modulation and pulse width modulation respectively, of which all have a potential to achieve an ultrafast recording rate-60ps/bit.

  12. Materialism.

    PubMed

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website.

  13. The origin of type I profiles in cluster lenticulars: an interplay between ram pressure stripping and tidally induced spiral migration

    NASA Astrophysics Data System (ADS)

    Clarke, Adam J.; Debattista, Victor P.; Roškar, Rok; Quinn, Tom

    2017-02-01

    Using N-body + smooth particle hydrodynamics simulations of galaxies falling into a cluster, we study the evolution of their radial density profiles. When evolved in isolation, galaxies develop a type II (down-bending) profile. In the cluster, the evolution of the profile depends on the minimum cluster-centric radius the galaxy reaches, which controls the degree of ram pressure stripping. If the galaxy falls to ˜50 per cent of the virial radius, then the profile remains type II, but if the galaxy reaches down to ˜20 per cent of the virial radius, the break weakens and the profile becomes more type I like. The velocity dispersions are only slightly increased in the cluster simulations compared with the isolated galaxy; random motion therefore cannot be responsible for redistributing material sufficiently to cause the change in the profile type. Instead, we find that the joint action of radial migration driven by tidally induced spirals and the outside-in quenching of star formation due to ram pressure stripping alters the density profile. As a result, this model predicts a flattening of the age profiles amongst cluster lenticulars with type I profiles, which can be observationally tested.

  14. Reliability study of retention and memory gate integrity in a 1K MNOS RAM

    SciTech Connect

    Nasby, R.D.; Miller, W.M.; White, R.L.

    1986-01-01

    The reliability of a 1K MNOS RAM with regards to retention and nitride gate integrity has been demonstrated. Over 400 devices were screened and life tested to demonstrate 0.999 reliability during device life. The device was a 1K MNOS memory used in a RAM application with an erase/write cycle of 32 microseconds and a life specification of 1E7 cycles.

  15. DaimlerChrysler builds a mine-duty Dodge Ram trucks

    SciTech Connect

    Fiscor, S.

    2006-10-15

    Automotive and engine OEMS worked together with the mines to develop a diesel-powered underground pickup truck that meets emissions standards. The article relates how DaimlerChrysler and Cummins eventually managed to redesign the engine for the Dodge Ram truck to satisfy the new HD10 onroad Environmental Protection Agency regulations for diesel engines that come into force in January 2007. Classic Motors in Richfield, Utah modifies Dodge Ram pickups for use as mantrips and service vehicles. 4 photos.

  16. Effects of ewe breed and ram exposure on estrous behavior in May and June.

    PubMed

    Nugent, R A; Notter, D R; Beal, W E

    1988-06-01

    Two groups of purebred ewes (A and B), each consisting of 25 Dorsets and 25 Hampshires, were used to study effects of ewe breed and ram exposure on ovulation and estrus in May and June. Ewes lambed in January and February and were isolated from mature rams for at least 5 mo. From May 8 to June 11 (Period 1), Group A ewes were penned with vasectomized rams fitted with marking harnesses and Group B ewes were isolated from rams. From June 11 to July 13 (Period 2), rams were placed with Group B ewes and Group A ewes were isolated from rams. Ovulation was monitored by biweekly serum progesterone assays and crayon marks were used to detect estrus. For Group A ewes in Period 1, more Dorsets ovulated (96%) than did Hampshires (72%), and of ewes that ovulated, more Dorsets mated (83 vs 28%). Fifty-five percent of Dorsets, but only 20% of Hampshires, appeared to have been spontaneously cycling at the start of the experiment. Of ewes mated in Period 1, more Dorsets than Hampshires continued to cycle during Period 2 (65 vs 0%). For Group B ewes in Period 1, 44% of Dorsets, but only 8% of Hampshires, ovulated in the absence of rams. In Period 2, 92% of Dorsets and 84% of Hampshires ovulated. Of ewes that ovulated, more Dorset ewes mated (78 vs 52%). Of ewes that mated, more Dorsets appeared to be cycling spontaneously at ram introduction (39 vs 0%). Throughout the study, 24% of Dorsets, but no Hampshires, cycled continuously.(ABSTRACT TRUNCATED AT 250 WORDS)

  17. Parallel-Plate Acoustic Absorbers For Hot Environments

    NASA Technical Reports Server (NTRS)

    Doychak, Joseph; Parrot, Tony L.

    1995-01-01

    Stacking patterns and materials chosen to suppress noise. Acoustic liners incorporating parallel-plate absorbing elements proposed for use in suppressing broadband aerodynamic noise originating in flows of hot gases in ducts. One potential application lies in suppressing noise generated in exhaust-jet mixer/ejectors in propulsion system of proposed High-Speed Civil Transport. In addition, such absorbers useful in any situation in which high temperature limits use of such conventional resonant acoustic-liner materials as perforated face sheets bonded to honey-comb-core panels.

  18. Counterflow absorber for an absorption refrigeration system

    DOEpatents

    Reimann, Robert C.

    1984-01-01

    An air-cooled, vertical tube absorber for an absorption refrigeration system is disclosed. Strong absorbent solution is supplied to the top of the absorber and refrigerant vapor is supplied to the bottom of the absorber to create a direct counterflow of refrigerant vapor and absorbent solution in the absorber. The refrigeration system is designed so that the volume flow rate of refrigerant vapor in the tubes of the absorber is sufficient to create a substantially direct counterflow along the entire length of each tube in the absorber. This provides several advantages for the absorber such as higher efficiency and improved heat transfer characteristics, and allows improved purging of non-condensibles from the absorber.

  19. Prolactin variants in ram adenohypophyses vary with season

    NASA Technical Reports Server (NTRS)

    Stroud, C. M.; Deaver, D. R.; Peters, J. L.; Loeper, D. C.; Toth, B. E.; Derr, J. A.; Hymer, W. C.

    1992-01-01

    Secretion of PRL in sheep is affected by photoperiod being highest during the spring and summer, lowest in fall and winter. The objectives of this study were to determine if 1) the production of variant forms of PRL, and 2) immuno- and bioactivities of PRL (iPRL and bPRL) differ during times of the year selected to represent periods of low, transitional and high PRL secretion. Twelve mature rams were maintained on pasture and killed in October, December, and April (n = 4/month). Individual pituitary glands were dispersed, cells obtained, and fixed for immunocytochemical flow cytometry, extracted with 0.01 N NaHCO3 or cultured in serum-free, defined media. The Mr of PRL extracted from cells immediately following dispersion ranged from 14-140K, with significantly more bands greater than 40K being detected from rams sacrificed in December than from those killed in October and April (P less than 0.01). No bands of PRL greater than 25K were observed when samples were reduced with beta-mercaptoethanol prior to electrophoresis, indicating that the high Mr forms were disulfide-linked aggregates. Culture media from October and April contained variants of PRL that ranged from 22-40K but those greater than 25K were generally not observed from cells harvested during December. Extracts of cells after 24 h in culture contained fewer high Mr species during December than had been present in initial extracts from that month. In contrast, during April more high Mr intracellular forms were present after culture than had been detected prior to culture during that month. The percentage of lactotrophs averaged 50.0 +/- 2.5, 47.4 +/- 5.7, and 59.4 +/- 5.5 for October, December, and April, respectively. Initial lactotroph content (pg/lactotroph) of iPRL was higher (P = 0.06) in April (46.0 +/- 17.0) when compared to October and December (8.0 +/- 2.0 and 20.0 +/- 10.0, respectively). In contrast, the bPRL content of initial extracts was higher (P = 0.05) in December (267.0 +/- 68.0) than

  20. [Castration in the bull calf and ram lamb].

    PubMed

    Steiner, A; Janett, F

    2013-11-01

    This paper aims to provide an overview of the accepted techniques of pain relief and castration and guidelines of how to best perform these painful interventions in an animal-friendly way under Swiss conditions. Calves should be castrated at the age of 14 days or less, at least 10 minutes after local anesthesia with lidocaine, applying a single rubber ring. Concurrently, a NSAID should be administered intravenously (ketoprofen, 3 mg/kg of bodyweight) and Tetanus-serum subcutaneously (off label use). If possible, ketoprofen(4.5 mg/kg BW) should be orally administered for 3 - 5 days postoperatively. At 10 days after applying the rubber ring, the dried-off scrotum including the rubber ring should be removed with a clean knife or a scalpel. Local anesthesia is not necessary for this procedure. Ram lambs should be castrated at the age of 14 days or less, at least 10 minutes after local anesthesia with lidocaine, applying a rubber ring. The toxic dose of 4 mg lidocaine/kg BW (corresponds to 1 ml lidocaine 2 % per lamb of 5 kg BW) should not be exceeded. Concurrently, a NSAID (off label use) and Tetanus-serum should be administered systemically. Immunization against GnRH represents an animal-friendly and economically feasible alternative to rubber ring castration. With two immunizations at an interval of 3 - 4 weeks testicular development can be inhibited for at least 3 months and the onset of puberty clearly delayed. However, a specific vaccine for use in ruminants is currently registered neither in Switzerland nor in Europe.

  1. Determination of fatty acid profile in ram spermatozoa and seminal plasma.

    PubMed

    Díaz, R; Torres, M A; Bravo, S; Sanchez, R; Sepúlveda, N

    2016-08-01

    Fatty acids are important in male reproductive function because they are associated with membrane fluidity, acrosome reaction, sperm motility and viability, but limited information exists about the fatty acid profile of ram semen. Our aim was to determine the fatty acid composition in ram spermatozoa and seminal plasma. Sixty ejaculates were obtained from three ram (20 ejaculates/ram) using artificial vagina. Ram spermatozoa (RS) and seminal plasma (SP) were separated using centrifugation, and the fatty acids were analysed by gas chromatography. Total lipids obtained in ram spermatozoa were 1.8% and 1.6% in seminal plasma. Saturated fatty acid (SFA) was proportionally major in SP (66.6%) that RS (49.9%). The highest proportions of SFA corresponded to C4:0 (RS = 16.3% and SP = 28.8%) and C16:0 (RS = 16.3% and PS = 20%). The most important unsaturated fatty acid (UFA) was docosahexaenoic acid (DHA), 44.9% in RS and 31.5% in SP. The profile of fatty acid and their proportions showed differences between spermatozoa and seminal plasma.

  2. Structural adaptations for ram ventilation: gill fusions in scombrids and billfishes.

    PubMed

    Wegner, Nicholas C; Sepulveda, Chugey A; Aalbers, Scott A; Graham, Jeffrey B

    2013-01-01

    For ram-gill ventilators such as tunas and mackerels (family Scombridae) and billfishes (families Istiophoridae, Xiphiidae), fusions binding the gill lamellae and filaments prevent gill deformation by a fast and continuous ventilatory stream. This study examines the gills from 28 scombrid and seven billfish species in order to determine how factors such as body size, swimming speed, and the degree of dependence upon ram ventilation influence the site of occurrence and type of fusions. In the family Scombridae there is a progressive increase in the reliance on ram ventilation that correlates with the elaboration of gill fusions. This ranges from mackerels (tribe Scombrini), which only utilize ram ventilation at fast cruising speeds and lack gill fusions, to tunas (tribe Thunnini) of the genus Thunnus, which are obligate ram ventilators and have two distinct fusion types (one binding the gill lamellae and a second connecting the gill filaments). The billfishes appear to have independently evolved gill fusions that rival those of tunas in terms of structural complexity. Examination of a wide range of body sizes for some scombrids and billfishes shows that gill fusions begin to develop at lengths as small as 2.0 cm fork length. In addition to securing the spatial configuration of the gill sieve, gill fusions also appear to increase branchial resistance to slow the high-speed current produced by ram ventilation to distribute flow evenly and optimally to the respiratory exchange surfaces.

  3. RAM function is dependent on Kapβ2-mediated nuclear entry.

    PubMed

    Gonatopoulos-Pournatzis, Thomas; Cowling, Victoria H

    2014-02-01

    Eukaryotic gene expression is dependent on the modification of the first transcribed nucleotide of pre-mRNA by the addition of the 7-methylguanosine cap. The cap protects transcripts from exonucleases and recruits complexes which mediate transcription elongation, processing and translation initiation. The cap is synthesized by a series of reactions which link 7-methylguanosine to the first transcribed nucleotide via a 5' to 5' triphosphate bridge. In mammals, cap synthesis is catalysed by the sequential action of RNGTT (RNA guanylyltransferase and 5'-phosphatase) and RNMT (RNA guanine-7 methyltransferase), enzymes recruited to RNA pol II (polymerase II) during the early stages of transcription. We recently discovered that the mammalian cap methyltransferase is a heterodimer consisting of RNMT and the RNMT-activating subunit RAM (RNMT-activating mini-protein). RAM activates and stabilizes RNMT and thus is critical for cellular cap methylation and cell viability. In the present study we report that RNMT interacts with the N-terminal 45 amino acids of RAM, a domain necessary and sufficient for maximal RNMT activation. In contrast, smaller components of this RAM domain are sufficient to stabilize RNMT. RAM functions in the nucleus and we report that nuclear import of RAM is dependent on PY nuclear localization signals and Kapβ2 (karyopherin β2) nuclear transport protein.

  4. The vitamin D receptor localization and mRNA expression in ram testis and epididymis.

    PubMed

    Jin, Hui; Huang, Yang; Jin, Guang; Xue, Yanrong; Qin, Xiaowei; Yao, Xiaolei; Yue, Wenbing

    2015-02-01

    The objectives of present study were to investigate the presence of vitamin D receptor (VDR) in testis and epididymis of ram by polymerase chain reaction (PCR), to locate VDR in testis and epididymis by immunohistochemistry and to compare difference of VDR expression between testis and epididymis before and after sexual maturation by Real time-PCR and Western blot. The results showed that VDR exists in the testis and epididymis of ram while VDR protein in testis and epididymis was localized in Leydig cells, spermatogonial stem cells, spermatocytes, Sertoli cells and principal cells. For the adult ram, the amounts of VDR mRNA and VDR protein were less (p < 0.01) in testis than compared with caput, corpus and cauda epididymis. For prepubertal ram, the result showed the same trend (p < 0.01). However, the expression levels of VDR mRNA and VDR protein in caput, corpus, cauda epididymis and testis showed no significant difference (p > 0.05) between adult and prepubertal. In conclusion, VDR exists in testis and epididymis of ram, suggesting 1α,25-(OH)(2)VD(3) may play a role in ram reproduction.

  5. Abnormalities of the testes and epididymis in bucks and rams slaughtered at Debre Zeit abattoir, Ethiopia.

    PubMed

    Regassa, F; Terefe, F; Bekana, M

    2003-12-01

    A study was conducted at Debre Zeit export abattoir on 404 bucks belonging to four breeds and 167 rams of two breeds. The animals were selected from the slaughter flock using stratified sampling based on breed. Ante-mortem and post-mortem examinations were carried out after each animal was carefully identified. Various genital abnormalities were observed, among which testicular atrophy and epididymitis were the predominant genital problems in both bucks and rams. The prevalence of cryptorchidism was higher (p<0.05) in bucks than in rams, while epididymitis (p<0.05), sperm granuloma (p<0.01) and epididymal cysts (p<0.05) were more frequent in rams. In bucks, none of these abnormalities was significantly associated with age (p>0.05). However, testicular atrophy (p<0.01), epididymitis (p<0.01) and haemorrhagic lesions (p<0.05) were associated with breed, the prevalence being higher in Woito-Guji and Boran bucks than in the Arsi-Bale and Afar breeds. In rams, age affected (p<0.05) the incidence of testicular atrophy, epididymitis and sperm granulomas. Epididymitis, sperm granuloma and epididymal cysts were more frequent (p<0.01) in Adal rams than in Black Head Somalis.

  6. Expression of basal cell marker revealed by RAM11 antibody during epithelial regeneration in rabbits.

    PubMed

    Lis, Grzegorz J; Jasek, Ewa; Litwin, Jan A; Gajda, Mariusz; Zarzecka, Joanna; Cichocki, Tadeusz

    2010-01-01

    RAM11 is a mouse monoclonal anti-rabbit macrophage antibody recognizing connective tissue and vascular macrophages. Our previous report showed that RAM11 reacted with basal cells of stratified squamous epithelia of rabbit skin, oral mucosa and esophagus. The aim of the present study was to follow the appearance of RAM11 immunoreactivity in basal cells of regenerating oral epithelium in rabbits. No RAM11 immunostaining was observed in the regenerating epithelium examined on days 1 and 3 of wound healing. A weak immunofluorescence first appeared on day 7 in single basal cells and 32% of RAM11- positive basal cells were observed on day 14. These findings indicate that expression of the antigen recognized by RAM11 antibody is a transient event in the differentiation of oral keratinocytes which not always occurs during epithelial repair, although it is a constant feature of epithelial turnover in mature epithelium. Therefore this antigen can be regarded as basal cell marker only in mature stratified squamous epithelia.

  7. Mapping liquid distribution in absorbent incontinence products.

    PubMed

    Landeryou, M A; Yerworth, R J; Cottenden, A M

    2003-01-01

    This paper reviews methods available for mapping the distribution of fluid in incontinence pad materials to assist with evaluating existing products and developing new ones, and to provide data for building and validating predictive models. Specifically, the following technologies are considered and their strengths and limitations described: discrete sensors based on conductance, temperature or optical measurements, optical imaging, gravimetric methods, X-ray imaging and magnetic resonance imaging. It is suggested that the ideal method would enable fluid distribution to be mapped in three dimensions with good spatial and time resolution in single materials and composite structures of simple and complex geometries under static and dynamic mechanical loading. It would also allow liquid to be mapped in products when worn by users. It is concluded that, although each existing method meets some of these requirements, and each requirement is met, at least reasonably well, by at least one method, improved techniques are needed. The particular need for methods that can provide some measurement of liquid saturation within absorbent products, both in the laboratory and in real use, is highlighted. In many cases, simple methods used appropriately are sufficient to elicit the important aspects of liquid transport and storage within absorbent products.

  8. Metamaterial Absorbers for Microwave Detection

    DTIC Science & Technology

    2015-06-01

    a) Depiction of metamaterial array of square resonators atop FR4. (b) Metamaterial dimensions and structure...comparison for varying resonator array dimension sizes. ..............23 Figure 12. Absorption derived from raw reflection data...36 x Figure 23. Metamaterial absorber array where resonator dimensions control the detection frequencies and

  9. Oil and fat absorbing polymers

    NASA Technical Reports Server (NTRS)

    Marsh, H. E., Jr. (Inventor)

    1977-01-01

    A method is described for forming a solid network polymer having a minimal amount of crosslinking for use in absorbing fats and oils. The polymer remains solid at a swelling ratio in oil or fat of at least ten and provides an oil absorption greater than 900 weight percent.

  10. Porous Carbon Nanoparticle Networks with Tunable Absorbability

    PubMed Central

    Dai, Wei; Kim, Seong Jin; Seong, Won-Kyeong; Kim, Sang Hoon; Lee, Kwang-Ryeol; Kim, Ho-Young; Moon, Myoung-Woon

    2013-01-01

    Porous carbon materials with high specific surface areas and superhydrophobicity have attracted much research interest due to their potential application in the areas of water filtration, water/oil separation, and oil-spill cleanup. Most reported superhydrophobic porous carbon materials are fabricated by complex processes involving the use of catalysts and high temperatures but with low throughput. Here, we present a facile single-step method for fabricating porous carbon nanoparticle (CNP) networks with selective absorbability for water and oils via the glow discharge of hydrocarbon plasma without a catalyst at room temperature. Porous CNP networks were grown by the continuous deposition of CNPs at a relatively high deposition pressure. By varying the fluorine content, the porous CNP networks exhibited tunable repellence against liquids with various degrees of surface tension. These porous CNP networks could be applied for the separation of not only water/oil mixtures but also mixtures of liquids with different surface tension levels. PMID:23982181

  11. OVI absorbers in SDSS spectra

    NASA Astrophysics Data System (ADS)

    Frank, Stephan

    We conducted a systematic search for signatures of the Intergalactic Medium (IGM) in Quasar spectra of the Sloan Digital Sky Survey (SDSS) Data Release 3 (DR3), focusing on finding intervening absorbers via detection of their O VI doublet. We present a search algorithm, and criteria for distinguishing candidates from spurious Lyman a forest lines. In addition, we compare our findings with simulations of the Lyman a forest in order to estimate the detectability of O VI doublets over various redshift intervals. We obtain a sample of 1866 O VI doublet candidates with rest-frame equivalent width >= 0.05 λ in 855 AGN spectra (out of 3702 objects with redshifts in the range accessible for O VI detection). This sample is subdivided into 3 groups according to the likelihood of being real and the potential for follow-up observation of the candidate. The group with the cleanest and most secure candidates is comprised of 145 candidates. 69 of these reside at a velocity separation >= 5000 km/s from the QSO, and can therefore be classified tentatively as intervening absorbers. Most of these absorbers have not been picked up by earlier, automated QSO absorption line detection algorithms. This sample increases the number of known O VI absorbers at redshifts beyond z abs >= 2.7 substantially. We propose to obtain observations of some of the candidates with the best signatures for O VI doublets with high signal-to-noise and high resolution in order to better constrain the physical state of the absorbers. We then focused on a subsample of 387 AGN sightlines with an average S/N >= 5: 0, allowing for the detection of absorbers above a rest-frame equivalent width limit of W r >= 0:19 ? A for the O VI 1032 λ component. Accounting for random interlopers mimicking an O VI doublet, we derive for the first time a secure lower limit for the redshift number density DN/Dz for redshifts z abs >= 2:8. With extensive Monte Carlo simulations we quantify the losses of absorbers due to blending

  12. Numerical Sensitivity Analysis of a Composite Impact Absorber

    NASA Astrophysics Data System (ADS)

    Caputo, F.; Lamanna, G.; Scarano, D.; Soprano, A.

    2008-08-01

    This work deals with a numerical investigation on the energy absorbing capability of structural composite components. There are several difficulties associated with the numerical simulation of a composite impact-absorber, such as high geometrical non-linearities, boundary contact conditions, failure criteria, material behaviour; all those aspects make the calibration of numerical models and the evaluation of their sensitivity to the governing geometrical, physical and numerical parameters one of the main objectives of whatever numerical investigation. The last aspect is a very important one for designers in order to make the application of the model to real cases robust from both a physical and a numerical point of view. At first, on the basis of experimental data from literature, a preliminary calibration of the numerical model of a composite impact absorber and then a sensitivity analysis to the variation of the main geometrical and material parameters have been developed, by using explicit finite element algorithms implemented in the Ls-Dyna code.

  13. Wideband-Switchable Metamaterial Absorber Using Injected Liquid Metal

    NASA Astrophysics Data System (ADS)

    Kim, Hyung Ki; Lee, Dongju; Lim, Sungjoon

    2016-08-01

    Metamaterial absorbers can provide good solutions for radar-cross-section (RCS) reduction. In spite of their attractive features of thinness, lightness, and low cost, resonant metamaterial absorbers have a drawback of narrow bandwidth. For practical radar applications, wideband absorbers are necessary. In this paper, we propose a wideband-switchable metamaterial absorber using liquid metal. In order to reduce RCS both for X-band and C-band, the switchable Jerusalem cross (JC) resonator is introduced. The JC resonator consists of slotted circular rings, chip resistors, and microfluidic channels. The JC resonator is etched on a flexible printed circuit board (FPCB), and the microfluidic channels are laser-etched on a polydimethylsiloxane (PDMS) material. The proposed absorber can switch the absorption frequency band by injecting a liquid metal alloy into the channels. The performance of the absorber was demonstrated through full-wave simulation and through measurements employing prototypes. The experimental results showed absorption ratios of over 90% from 7.43 GHz to 14.34 GHz, and from 5.62 GHz to 7.3 GHz, with empty channels and liquid metal-filled channels, respectively. Therefore, the absorption band was successfully switched between the C-band (4–8 GHz) and the X-band (8–12 GHz) by injecting liquid metal eutectic gallium indium alloy (EGaIn) into the channels.

  14. Wideband-Switchable Metamaterial Absorber Using Injected Liquid Metal.

    PubMed

    Kim, Hyung Ki; Lee, Dongju; Lim, Sungjoon

    2016-08-22

    Metamaterial absorbers can provide good solutions for radar-cross-section (RCS) reduction. In spite of their attractive features of thinness, lightness, and low cost, resonant metamaterial absorbers have a drawback of narrow bandwidth. For practical radar applications, wideband absorbers are necessary. In this paper, we propose a wideband-switchable metamaterial absorber using liquid metal. In order to reduce RCS both for X-band and C-band, the switchable Jerusalem cross (JC) resonator is introduced. The JC resonator consists of slotted circular rings, chip resistors, and microfluidic channels. The JC resonator is etched on a flexible printed circuit board (FPCB), and the microfluidic channels are laser-etched on a polydimethylsiloxane (PDMS) material. The proposed absorber can switch the absorption frequency band by injecting a liquid metal alloy into the channels. The performance of the absorber was demonstrated through full-wave simulation and through measurements employing prototypes. The experimental results showed absorption ratios of over 90% from 7.43 GHz to 14.34 GHz, and from 5.62 GHz to 7.3 GHz, with empty channels and liquid metal-filled channels, respectively. Therefore, the absorption band was successfully switched between the C-band (4-8 GHz) and the X-band (8-12 GHz) by injecting liquid metal eutectic gallium indium alloy (EGaIn) into the channels.

  15. Wideband-Switchable Metamaterial Absorber Using Injected Liquid Metal

    PubMed Central

    Kim, Hyung Ki; Lee, Dongju; Lim, Sungjoon

    2016-01-01

    Metamaterial absorbers can provide good solutions for radar-cross-section (RCS) reduction. In spite of their attractive features of thinness, lightness, and low cost, resonant metamaterial absorbers have a drawback of narrow bandwidth. For practical radar applications, wideband absorbers are necessary. In this paper, we propose a wideband-switchable metamaterial absorber using liquid metal. In order to reduce RCS both for X-band and C-band, the switchable Jerusalem cross (JC) resonator is introduced. The JC resonator consists of slotted circular rings, chip resistors, and microfluidic channels. The JC resonator is etched on a flexible printed circuit board (FPCB), and the microfluidic channels are laser-etched on a polydimethylsiloxane (PDMS) material. The proposed absorber can switch the absorption frequency band by injecting a liquid metal alloy into the channels. The performance of the absorber was demonstrated through full-wave simulation and through measurements employing prototypes. The experimental results showed absorption ratios of over 90% from 7.43 GHz to 14.34 GHz, and from 5.62 GHz to 7.3 GHz, with empty channels and liquid metal-filled channels, respectively. Therefore, the absorption band was successfully switched between the C-band (4–8 GHz) and the X-band (8–12 GHz) by injecting liquid metal eutectic gallium indium alloy (EGaIn) into the channels. PMID:27546310

  16. MULTI-WAVELENGTH STUDIES OF SPECTACULAR RAM PRESSURE STRIPPING OF A GALAXY: DISCOVERY OF AN X-RAY ABSORPTION FEATURE

    SciTech Connect

    Gu, Liyi; Makishima, Kazuo; Yagi, Masafumi; Nakazawa, Kazuhiro; Yoshida, Michitoshi; Fujita, Yutaka; Hattori, Takashi; Akahori, Takuya

    2013-11-10

    We report the detection of an X-ray absorption feature near the galaxy M86 in the Virgo cluster. The absorber has a column density of 2-3 × 10{sup 20} cm{sup –2}, and its position coincides with the peak of an intracluster H I cloud which was removed from the galaxy NGC 4388 presumably by ram pressure. These results indicate that the H I cloud is located in front of M86 along the line-of-sight, and suggest that the stripping was primarily created by an interaction between NGC 4388 and the hot plasmas of the Virgo cluster, not the M86 halo. By calculating an X-ray temperature map, we further detected an X-ray counterpart of the H I cloud up to ≈3' south of M86. It has a temperature of 0.89 keV and a mass of ∼4.5 × 10{sup 8} M {sub ☉}, exceeding the estimated H I gas mass. The high hot-to-cold gas ratio in the cloud indicates a significant evaporation of the H I gas, probably by thermal conduction from the hotter cluster plasma with a sub-Spitzer rate.

  17. Continuous exposure to sexually active rams extends estrous activity in ewes in spring.

    PubMed

    Abecia, J A; Chemineau, P; Flores, J A; Keller, M; Duarte, G; Forcada, F; Delgadillo, J A

    2015-12-01

    Sexual activity in sheep is under photoperiodic control, which is the main environmental factor responsible for the seasonality of reproduction. However, other natural environmental factors such as presence of conspecifics can slightly influence the timing of onset and offset of the breeding season. In goats, we have found that the continuous presence of bucks that were rendered sexually active out of season by previous exposure to long days, prevented goats from displaying seasonal anestrus, which suggests that the relative contribution of photoperiod in controlling seasonal anestrus should be reevaluated in small ruminant species. The aim of this study was to assess whether the presence of sexually active rams that had been stimulated by artificial photoperiod and melatonin implants, reduces seasonal anestrus in sheep, by prolonging ovulatory activity in spring. Ewes were assigned to one of two groups (n = 16 and 15), which were housed in two separate barns, and kept in contact, either with the treated or the control rams between March and July. Vasectomized rams were either exposed to 2 months of long days followed by the insertion of three subcutaneous melatonin implants (treated rams, n = 8), or exposed to natural light conditions (control rams, n = 2). Estrus was monitored daily, and weekly plasma progesterone analyses indicated ovulatory activity. Ewes that were exposed to treated rams exhibited a higher proportion of monthly estrus than ewes exposed to the control rams (P < 0.05). Thirteen of 15 ewes (one ewe was not considered because of the presence of persistent CL) exposed to stimulated rams exhibited estrous behavior in a cyclic manner. In contrast, all ewes exposed to control rams stopped estrous activity for a period of time during the study, such that this group exhibited a significantly longer anestrous season (mean ± standard error of the mean 89 ± 9 days) than did the ewes housed with treated rams (26 ± 10 days; P < 0

  18. A ram-pressure threshold for star formation

    NASA Astrophysics Data System (ADS)

    Whitworth, A. P.

    2016-05-01

    In turbulent fragmentation, star formation occurs in condensations created by converging flows. The condensations must be sufficiently massive, dense and cool to be gravitationally unstable, so that they start to contract; and they must then radiate away thermal energy fast enough for self-gravity to remain dominant, so that they continue to contract. For the metallicities and temperatures in local star-forming clouds, this second requirement is only met robustly when the gas couples thermally to the dust, because this delivers the capacity to radiate across the full bandwidth of the continuum, rather than just in a few discrete spectral lines. This translates into a threshold for vigorous star formation, which can be written as a minimum ram pressure PCRIT ˜ 4 × 10-11 dyne. PCRIT is independent of temperature, and corresponds to flows with molecular hydrogen number density n_{{H_2.FLOW}} and velocity vFLOW satisfying n_{{H_2.FLOW}} v_{FLOW}^2≳ 800 cm^{-3} (km s^{-1})^2. This in turn corresponds to a minimum molecular hydrogen column density for vigorous star formation, N_{{H_2.CRIT}} ˜ 4 × 10^{21} cm^{-2} (ΣCRIT ˜ 100 M⊙ pc-2), and a minimum visual extinction AV, CRIT ˜ 9 mag. The characteristic diameter and line density for a star-forming filament when this threshold is just exceeded - a sweet spot for local star formation regions - are 2RFIL ˜ 0.1 pc and μFIL ˜ 13 M⊙ pc-2. The characteristic diameter and mass for a prestellar core condensing out of such a filament are 2RCORE ˜ 0.1 pc and MCORE ˜ 1 M⊙. We also show that fragmentation of a shock-compressed layer is likely to commence while the convergent flows creating the layer are still ongoing, and we stress that, under this circumstance, the phenomenology and characteristic scales for fragmentation of the layer are fundamentally different from those derived traditionally for pre-existing layers.

  19. [Performance of desulfurizing absorbent of roasted navajoite].

    PubMed

    Chen, Fang; Yang, Chun-ping; Gan, Hai-ming; Wu, Ting; Chen, Hai-lin; Chen, Hong; Xu, Ke-hui; Xie, Geng-xin

    2010-04-01

    An innovative flue gas desulfurization (FGD) coupling process was proposed in this study to overcome the problems in wet-type limestone/lime processes which include fouling, clogging, and difficulty of selling the by-products and the problems in traditional process for vanadium extraction from navajoite ore such as excessive consumption of sulfuric acid and emissions of pollutants. The performance of a jet bubbling reactor (JBR) at pilot-scale was evaluated using navajoite ore produced in the process of extracting vanadium pentoxide as desulfurization absorbent. Results showed that navajoite ore slurry achieved better desulfurization performance than limestone slurry. When the inlet flue gas pressure drop was 3.0 kPa, the gas flow was about 2350 m3 x h(-1) and the pH of the navajoite ore slurry was higher than 4.5, the desulfurization efficiency was stable about 90%. The SO2 removal efficiency appeared to increase along with the increasing of absorbent cycle-index. The efficiency of the second circulation was improved 3.5% compared to the first circulation. After an operating duration of 40 minutes, the leaching rate of vanadium pentoxide was about 20%, and reached 60% when the by-products were leached with 5% dilute sulfuric acid for 10 hours. The by-product from this process not only could be used to produce vanadium pentoxide which is a valuable industrial product, but also could significantly overcome the pollution problem existing in the traditional refining process of vanadium pentoxide when navajoite ore is used as the feed material. This FGD process using roasted navajoite slurry as absorbent is environmental sound and cost-effective, and shows the potential for application in the field of flue gas desulfurization as well as hydrometallurgy.

  20. Polymers used to absorb fats and oils: A concept

    NASA Technical Reports Server (NTRS)

    Marsh, H. E., Jr.

    1974-01-01

    One approach to problem of excessive oils and fats is to develop method by which oil is absorbed into solid mixture for elimination as solid waste. Materials proposed for these purposes are cross-linked (network) polymers that have high affinity for aliphatic substances, i. e., petroleum, animal, and vegetable oils.