Science.gov

Sample records for absorption rates sar

  1. Effects of Averaging Mass on Predicted Specific Absorption Rate (SAR) Values

    DTIC Science & Technology

    2002-09-01

    lung, liver , muscle, cerebral spinal fluid, nerve spinal, heart) in relation to various frequencies and orientations. This parametric study...relatively low ratios between spatial peak SAR and whole body SAR average were found in heart, liver , lung outer and lung inner (between 3 and 7) (see...MASS ON PREDICTED SAR 38 Figure 19. Ratios between peak localized SAR and whole body SAR average for liver for various mass intervals (1g and 10 g

  2. Resonance behaviour of whole-body averaged specific energy absorption rate (SAR) in the female voxel model, NAOMI

    NASA Astrophysics Data System (ADS)

    Dimbylow, Peter

    2005-09-01

    Finite-difference time-domain (FDTD) calculations have been performed of the whole-body averaged specific energy absorption rate (SAR) in a female voxel model, NAOMI, under isolated and grounded conditions from 10 MHz to 3 GHz. The 2 mm resolution voxel model, NAOMI, was scaled to a height of 1.63 m and a mass of 60 kg, the dimensions of the ICRP reference adult female. Comparison was made with SAR values from a reference male voxel model, NORMAN. A broad SAR resonance in the NAOMI values was found around 900 MHz and a resulting enhancement, up to 25%, over the values for the male voxel model, NORMAN. This latter result confirmed previously reported higher values in a female model. The effect of differences in anatomy was investigated by comparing values for 10-, 5- and 1-year-old phantoms rescaled to the ICRP reference values of height and mass which are the same for both sexes. The broad resonance in the NAOMI child values around 1 GHz is still a strong feature. A comparison has been made with ICNIRP guidelines. The ICNIRP occupational reference level provides a conservative estimate of the whole-body averaged SAR restriction. The linear scaling of the adult phantom using different factors in longitudinal and transverse directions, in order to match the ICRP stature and weight, does not exactly reproduce the anatomy of children. However, for public exposure the calculations with scaled child models indicate that the ICNIRP reference level may not provide a conservative estimate of the whole-body averaged SAR restriction, above 1.2 GHz for scaled 5- and 1-year-old female models, although any underestimate is by less than 20%.

  3. Verification of Parallel C Code for Specific Absorption Rate (SAR) of Electromagnetic Fields (EMF)

    DTIC Science & Technology

    2010-07-06

    P.A. Mason. 2002. Empirical validation of SAR values predicted by FDTD modeling. Bioelectromagnetics 23, no. 1: 37-48. doi:10.1002/bem.96. Gajšek P...permittivity values. Bioelectromagnetics 22, no. 6: 384-400. doi:10.1002/bem.66. Gandhi OP, Numerical and experimental methods for dosimetry of RF radiation

  4. SAROTA: application of specific absorption rate (SAR) and over-the-air (OTA) data for the characterization of the real-life exposure due to mobile phones

    NASA Astrophysics Data System (ADS)

    Monebhurrun, Vikass

    2013-04-01

    The RF exposure level of a mobile phone is quantified by the measurement of the specific absorption rate (SAR) under laboratory conditions. The SAR which is measured while the mobile phone is operated at maximum power level does not reflect the real-life exposure scenario since the mobile phone typically re-adjusts its power level and frequency depending on the quality of the communication link with the nearest base station. The choice of a low RF exposure device based on the comparison of the relative SAR values of mobile phones can be misleading. The real-life RF exposure also depends on the over-the-air (OTA) performance of the mobile phone. Taken independently, the two sets of data do not allow a straightforward comparison of the global RF performance amongst mobile phones. A unique and simple parameter denoted as the SAROTA index is proposed for the characterization of mobile phones with regard to both RF exposure and OTA performance. The SAROTA index provides the real-life exposure index of the mobile phone.

  5. Synthetic aperture design for increased SAR image rate

    SciTech Connect

    Bielek, Timothy P.; Thompson, Douglas G.; Walker, Bruce C.

    2009-03-03

    High resolution SAR images of a target scene at near video rates can be produced by using overlapped, but nevertheless, full-size synthetic apertures. The SAR images, which respectively correspond to the apertures, can be analyzed in sequence to permit detection of movement in the target scene.

  6. Intelligent low rate compression of speckled SAR imagery

    SciTech Connect

    Ives, R.W.; Eichel, P.; Magotra, N.

    1997-05-01

    This paper describes a compression technique under development at Sandia National Laboratories for the compression of complex synthetic aperture radar (SAR) imagery at very low overall bit rates. The methods involved combine several elements of existing and new lossy and lossless compression schemes in order to achieve an overall compression ratio of large SAR scenes of at least 50:1, while maintaining reasonable image quality. It is assumed that the end user will be primarily interested in specific regions of interest within the image (called chips), but that the context in which these chips appear within the entire scene is also of importance to an image analyst. The term intelligent is used to signify an external cuer which locates the chips of interest.

  7. Accurate measurement of the specific absorption rate using a suitable adiabatic magnetothermal setup

    NASA Astrophysics Data System (ADS)

    Natividad, Eva; Castro, Miguel; Mediano, Arturo

    2008-03-01

    Accurate measurements of the specific absorption rate (SAR) of solids and fluids were obtained by a calorimetric method, using a special-purpose setup working under adiabatic conditions. Unlike in current nonadiabatic setups, the weak heat exchange with the surroundings allowed a straightforward determination of temperature increments, avoiding the usual initial-time approximations. The measurements performed on a commercial magnetite aqueous ferrofluid revealed a good reproducibility (4%). Also, the measurements on a copper sample allowed comparison between experimental and theoretical values: adiabatic conditions gave SAR values only 3% higher than the theoretical ones, while the typical nonadiabatic method underestimated SAR by 21%.

  8. Design of Miniaturized Double-Negative Material for Specific Absorption Rate Reduction in Human Head

    PubMed Central

    Faruque, Mohammad Rashed Iqbal; Islam, Mohammad Tariqul

    2014-01-01

    In this study, a double-negative triangular metamaterial (TMM) structure, which exhibits a resounding electric response at microwave frequency, was developed by etching two concentric triangular rings of conducting materials. A finite-difference time-domain method in conjunction with the lossy-Drude model was used in this study. Simulations were performed using the CST Microwave Studio. The specific absorption rate (SAR) reduction technique is discussed, and the effects of the position of attachment, the distance, and the size of the metamaterials on the SAR reduction are explored. The performance of the double-negative TMMs in cellular phones was also measured in the cheek and the tilted positions using the COMOSAR system. The TMMs achieved a 52.28% reduction for the 10 g SAR. These results provide a guideline to determine the triangular design of metamaterials with the maximum SAR reducing effect for a mobile phone. PMID:25350398

  9. Rate allocation for spotlight SAR phase history data compression.

    PubMed

    Owens, J W; Marcellin, M W

    1999-01-01

    Complex phase history data in synthetic aperture radar (SAR) systems require extensive processing before useful images can be obtained. In spotlight mode SAR systems, useful images can be obtained by applying aperture weighting and inverse Fourier transform operations to SAR phase history data. In this paper, we are concerned with the compression of the complex phase history data obtained by a spotlight SAR system. We exploit knowledge of the aperture weighting function along with Fourier transform processing to attach a "gain" factor to each complex phase history data sample. This gain factor is then used to efficiently allocate bits to the phase history data during quantization. Performance evaluations are presented for this compression system relative to other existing SAR phase history data compression systems.

  10. Parallel Transmission Pulse Design with Explicit Control for the Specific Absorption Rate in the Presence of Radiofrequency Errors

    PubMed Central

    Martin, Adrian; Schiavi, Emanuele; Eryaman, Yigitcan; Herraiz, Joaquin L.; Gagoski, Borjan; Adalsteinsson, Elfar; Wald, Lawrence L.; Guerin, Bastien

    2016-01-01

    Purpose A new framework for the design of parallel transmit (pTx) pulses is presented introducing constraints for local and global specific absorption rate (SAR) in the presence of errors in the radiofrequency (RF) transmit chain. Methods The first step is the design of a pTx RF pulse with explicit constraints for global and local SAR. Then, the worst possible SAR associated with that pulse due to RF transmission errors (“worst-case SAR”) is calculated. Finally, this information is used to re-calculate the pulse with lower SAR constraints, iterating this procedure until its worst-case SAR is within safety limits. Results Analysis of an actual pTx RF transmit chain revealed amplitude errors as high as 8% (20%) and phase errors above 3° (15°) for spokes (spiral) pulses. Simulations show that using the proposed framework, pulses can be designed with controlled “worst-case SAR” in the presence of errors of this magnitude at minor cost of the excitation profile quality. Conclusion Our worst-case SAR-constrained pTx design strategy yields pulses with local and global SAR within the safety limits even in the presence of RF transmission errors. This strategy is a natural way to incorporate SAR safety factors in the design of pTx pulses. PMID:26147916

  11. Analysis of the role of lead resistivity in specific absorption rate for deep brain stimulator leads at 3T MRI.

    PubMed

    Angelone, Leonardo M; Ahveninen, Jyrki; Belliveau, John W; Bonmassar, Giorgio

    2010-04-01

    Magnetic resonance imaging (MRI) on patients with implanted deep brain stimulators (DBSs) can be hazardous because of the antenna-effect of leads exposed to the incident radio-frequency field. This study evaluated electromagnetic field and specific absorption rate (SAR) changes as a function of lead resistivity on an anatomically precise head model in a 3T system. The anatomical accuracy of our head model allowed for detailed modeling of the path of DBS leads between epidermis and the outer table. Our electromagnetic finite difference time domain (FDTD) analysis showed significant changes of 1 g and 10 g averaged SAR for the range of lead resistivity modeled, including highly conductive leads up to highly resistive leads. Antenna performance and whole-head SAR were sensitive to the presence of the DBS leads only within 10%, while changes of over one order of magnitude were observed for the peak 10 g averaged SAR, suggesting that local SAR values should be considered in DBS guidelines. With rho(lead) = rho(copper) , and the MRI coil driven to produce a whole-head SAR without leads of 3.2 W/kg, the 1 g averaged SAR was 1080 W/kg and the 10 g averaged SAR 120 W/kg at the tip of the DBS lead. Conversely, in the control case without leads, the 1 g and 10 g averaged SAR were 0.5 W/kg and 0.6 W/kg, respectively, in the same location. The SAR at the tip of lead was similar with electrically homogeneous and electrically heterogeneous models. Our results show that computational models can support the development of novel lead technology, properly balancing the requirements of SAR deposition at the tip of the lead and power dissipation of the system battery.

  12. Analysis of the Role of Lead Resistivity in Specific Absorption Rate for Deep Brain Stimulator Leads at 3T MRI

    PubMed Central

    Angelone, Leonardo M.; Ahveninen, Jyrki; Belliveau, John W.; Bonmassar, Giorgio

    2011-01-01

    Magnetic resonance imaging (MRI) on patients with implanted deep brain stimulators (DBSs) can be hazardous because of the antenna-effect of leads exposed to the incident radio-frequency field. This study evaluated electromagnetic field and specific absorption rate (SAR) changes as a function of lead resistivity on an anatomically precise head model in a 3T system. The anatomical accuracy of our head model allowed for detailed modeling of the path of DBS leads between epidermis and the outer table. Our electromagnetic finite difference time domain (FDTD) analysis showed significant changes of 1 g and 10 g averaged SAR for the range of lead resistivity modeled, including highly conductive leads up to highly resistive leads. Antenna performance and whole-head SAR were sensitive to the presence of the DBS leads only within 10%, while changes of over one order of magnitude were observed for the peak 10 g averaged SAR, suggesting that local SAR values should be considered in DBS guidelines. With ρlead = ρcopper, and the MRI coil driven to produce a whole-head SAR without leads of 3.2 W/kg, the 1 g averaged SAR was 1080 W/kg and the 10 g averaged SAR 120 W/kg at the tip of the DBS lead. Conversely, in the control case without leads, the 1 g and 10 g averaged SAR were 0.5 W/kg and 0.6 W/kg, respectively, in the same location. The SAR at the tip of lead was similar with electrically homogeneous and electrically heterogeneous models. Our results show that computational models can support the development of novel lead technology, properly balancing the requirements of SAR deposition at the tip of the lead and power dissipation of the system battery. PMID:20335090

  13. Occurrence rate of SAR arcs during the 23nd solar activity cycle

    NASA Astrophysics Data System (ADS)

    Ievenko, Igor

    By data of photometric observations at the Maimaga station (57° N, 200° E, geomagnetic coordinates) at the Yakutsk meridian the occurrence rate of subauroral red (SAR) arcs for the 1997 to 2006 period has been analysed. The observations were carried out during winterspring periods at moonless nights under favorable atmospheric conditions. For˜370 nights of observations (total duration is˜3170 hours) 114 cases of SAR arcs occurrence (˜500 hours) have been registered. The occurrence rate of SAR arcs have been determined as a ratio of the number of registration hour intervals of SAR arcs to the summary observation time in hours for particular months. Subauroral red arcs have been registered every year both in the maximum and in the minimum of the solar activity cycle. The most observation occurrence of red arcs is registered on the rise (˜27%) and decay of the maximum of the solar activity cycle (˜36%). The average occurrence rate of SAR arcs during these years was less than in the 22nd solar activity cycle and is equal to ˜16% of the total observation time. The occurrence rate of SAR arcs observations corresponds to the changes of geomagnetic activity during the 23nd solar activity cycle.

  14. Enhancement of specific absorption rate in lossy dielectric objects using a slab of left-handed material

    NASA Astrophysics Data System (ADS)

    Zhao, Lei; Cui, Tie Jun

    2005-12-01

    An enhancement of the specific absorption rate (SAR) inside a lossy dielectric object has been investigated theoretically based on a slab of left-handed medium (LHM). In order to make an accurate analysis of SAR distribution, a proper Green’s function involved in the LHM slab is proposed, from which an integral equation for the electric field inside the dielectric object is derived. Such an integral equation has been solved accurately and efficiently using the conjugate gradient method and the fast Fourier transform. We have made a lot of numerical experiments on the SAR distributions inside the dielectric object excited by a line source with and without the LHM slab. Numerical experiments show that SAR can be enhanced tremendously when the LHM slab is involved due to the proper usage of strong surface waves, which will be helpful in the potential biomedical applications for hyperthermia. The physical insight for such a phenomenon has also been discussed.

  15. FDTD chiral brain tissue model for specific absorption rate determination under radiation from mobile phones at 900 and 1800 MHz

    NASA Astrophysics Data System (ADS)

    Zamorano, M.; Torres-Silva, H.

    2006-04-01

    A new electrodynamics model formed by chiral bioplasma, which represents the human head inner structure and makes it possible to analyse its behaviour when it is irradiated by a microwave electromagnetic field from cellular phones, is presented. The finite-difference time-domain (FDTD) numeric technique is used, which allows simulation of the electromagnetic fields, deduced with Maxwell's equations, and allows us to simulate the specific absorption rate (SAR). The results show the SAR behaviour as a function of the input power and the chirality factor. In considering the chiral brain tissue in the proposed human head model, the two more important conclusions of our work are the following: (a) the absorption of the electromagnetic fields from cellular phones is stronger, so the SAR coefficient is higher than that using the classical model, when values of the chiral factor are of order of 1; (b) 'inverse skin effect' shows up at 1800 MHz, with respect to a 900 MHz source.

  16. Animal model of Sar1b deficiency presents lipid absorption deficits similar to Anderson Disease

    PubMed Central

    Levic, Daniel S.; Minkel, JR; Wang, Wen-Der; Rybski, Witold M.; Melville, David B.; Knapik, Ela W.

    2015-01-01

    Anderson Disease (ANDD) or Chylomicron Retention Disease (CMRD) is a rare, hereditary lipid malabsorption syndrome associated with mutations in the SAR1B gene that is characterized by failure to thrive and hypocholesterolemia. Although the SAR1B structure has been resolved and its role in formation of coat protein II (COPII) coated carriers is well established, little is known about the requirement for SAR1B during embryogenesis. To address this question, we have developed a zebrafish model of Sar1b deficiency based on antisense oligonucleotide knockdown. We show that zebrafish sar1b is highly conserved among vertebrates, broadly expressed during development, and enriched in the digestive tract organs, brain and craniofacial skeleton. Consistent with ANDD symptoms of chylomicron retention, we found that dietary lipids in Sar1b deficient embryos accumulate in enterocytes. Transgenic expression analysis revealed that Sar1b is required for growth of exocrine pancreas and liver. Furthermore, we found abnormal differentiation and maturation of craniofacial cartilage associated with defects in procollagen II secretion, and absence of select, neuroD-positive neurons of the midbrain and hindbrain. The model presented here will help to systematically dissect developmental roles of Sar1b and to discover molecular and cellular mechanisms leading to organ-specific ANDD pathology. PMID:25559265

  17. Design of parallel transmission pulses for simultaneous multi-slice with explicit control for peak power and local specific absorption rate

    PubMed Central

    Guérin, Bastien; Setsompop, Kawin; Ye, Huihui; Poser, Benedikt A.; Stenger, Andrew V.; Wald, Lawrence L.

    2014-01-01

    Purpose To design parallel transmit (pTx) simultaneous multi-slice (SMS) spokes pulses with explicit control for peak power, local and global specific absorption rate (SAR). Methods We designed SMS pTx least-squares and magnitude least squares spokes pulses while constraining local SAR using the virtual observation points (VOPs) compression of SAR matrices. We evaluated our approach in simulations of a head (7 T) and a body (3 T) coil with 8 channels arranged in two z-rows. Results For many of our simulations, control of average power by Tikhonov regularization of the SMS pTx spokes pulse design yielded pulses that violated hardware and SAR safety limits. On the other hand, control of peak power alone yielded pulses that violated local SAR limits. Pulses optimized with control of both local SAR and peak power satisfied all constraints and therefore had the best excitation performance under limiting power and SAR constraints. These results extend our previous results for single slice pTx excitations but are more pronounced because of the large power demands and SAR of SMS pulses. Conclusions Explicit control of local SAR and peak power is required to generate optimal SMS pTx excitations satisfying both the system's hardware limits and regulatory safety limits. PMID:24938991

  18. Comparison of specific absorption rate induced in brain tissues of a child and an adult using mobile phone

    NASA Astrophysics Data System (ADS)

    Lu, Mai; Ueno, Shoogo

    2012-04-01

    The steady increase of mobile phone usage, especially mobile phones by children, has led to a rising concern about the possible adverse health effects of radio frequency electromagnetic field exposure. The objective of this work is to study whether there is a larger radio frequency energy absorption in the brain of a child compared to that of an adult. For this reason, three high-resolution models, two child head models (6 - and 11-year old) and one adult head model (34-year old) have been used in the study. A finite-difference time-domain method was employed to calculate the specific absorption rate (SAR) in the models from exposure to a generic handset at 1750 MHz. The results show that the SAR distributions in the human brain are age-dependent, and there is a deeper penetration of the absorbed SAR in the child's brain. The induced SAR can be significantly higher in subregions of the child's brain. In all of the examined cases, the SAR values in the brains of a child and an adult are well below the IEEE safety standard.

  19. Bioelectromagnetic effects measurements - SAR and induced current.

    PubMed

    Dlugosz, Tomasz

    2015-01-01

    The paper discusses several theoretical and practical aspects of the application of currents flowing through the body of a radiotelephone operator and Specific Absorption Rate (SAR). SAR is known as the physical quantity which is a perfect solution for biological experiments. Unfortunately, SAR cannot be measured directly. Contrary to SAR, which is limited to the penetration depth, a current induced in a point of a body is measurable in any other point of the body. The main objective of this paper is to show that the current induced in a human body when using a radiotelephone or mobile phone is significant and should be analyzed as widely as SAR is. Computer simulations of a human's hand with a radiotelephone were made. Experiments were also conducted. The results of the experiments show that induced current is also as important as SAR and it cannot be omitted in bioelectromagnetic experiments. In biomedical studies both parameters: induced current and SAR play a major role.

  20. Specific absorption rate dependence on temperature in magnetic field hyperthermia measured by dynamic hysteresis losses (ac magnetometry).

    PubMed

    Garaio, Eneko; Sandre, Olivier; Collantes, Juan-Mari; Garcia, Jose Angel; Mornet, Stéphane; Plazaola, Fernando

    2015-01-09

    Magnetic nanoparticles (NPs) are intensively studied for their potential use for magnetic hyperthermia, a treatment that has passed a phase II clinical trial against severe brain cancer (glioblastoma) at the end of 2011. Their heating power, characterized by the 'specific absorption rate (SAR)', is often considered temperature independent in the literature, mainly because of the difficulties that arise from the measurement methodology. Using a dynamic magnetometer presented in a recent paper, we measure here the thermal dependence of SAR for superparamagnetic iron oxide (maghemite) NPs of four different size-ranges corresponding to mean diameters around 12 nm, 14 nm, 15 nm and 16 nm. The article reports a parametrical study extending from 10 to 60 °C in temperature, from 75 to 1031 kHz in frequency, and from 2 to 24 kA m(-1) in magnetic field strength. It was observed that SAR values of smaller NPs decrease with temperature whereas for the larger sample (16 nm) SAR values increase with temperature. The measured variation of SAR with temperature is frequency dependent. This behaviour is fully explained within the scope of linear response theory based on Néel and Brown relaxation processes, using independent magnetic measurements of the specific magnetization and the magnetic anisotropy constant. A good quantitative agreement between experimental values and theoretical values is confirmed in a tri-dimensional space that uses as coordinates the field strength, the frequency and the temperature.

  1. Specific absorption rate dependence on temperature in magnetic field hyperthermia measured by dynamic hysteresis losses (ac magnetometry)

    NASA Astrophysics Data System (ADS)

    Garaio, Eneko; Sandre, Olivier; Collantes, Juan-Mari; Garcia, Jose Angel; Mornet, Stéphane; Plazaola, Fernando

    2015-01-01

    Magnetic nanoparticles (NPs) are intensively studied for their potential use for magnetic hyperthermia, a treatment that has passed a phase II clinical trial against severe brain cancer (glioblastoma) at the end of 2011. Their heating power, characterized by the ‘specific absorption rate (SAR)’, is often considered temperature independent in the literature, mainly because of the difficulties that arise from the measurement methodology. Using a dynamic magnetometer presented in a recent paper, we measure here the thermal dependence of SAR for superparamagnetic iron oxide (maghemite) NPs of four different size-ranges corresponding to mean diameters around 12 nm, 14 nm, 15 nm and 16 nm. The article reports a parametrical study extending from 10 to 60 {}^\\circ C in temperature, from 75 to 1031 kHz in frequency, and from 2 to 24 kA m-1 in magnetic field strength. It was observed that SAR values of smaller NPs decrease with temperature whereas for the larger sample (16 nm) SAR values increase with temperature. The measured variation of SAR with temperature is frequency dependent. This behaviour is fully explained within the scope of linear response theory based on Néel and Brown relaxation processes, using independent magnetic measurements of the specific magnetization and the magnetic anisotropy constant. A good quantitative agreement between experimental values and theoretical values is confirmed in a tri-dimensional space that uses as coordinates the field strength, the frequency and the temperature.

  2. The formation of linear aggregates in magnetic hyperthermia: implications on specific absorption rate and magnetic anisotropy.

    PubMed

    Saville, Steven L; Qi, Bin; Baker, Jonathon; Stone, Roland; Camley, Robert E; Livesey, Karen L; Ye, Longfei; Crawford, Thomas M; Mefford, O Thompson

    2014-06-15

    The design and application of magnetic nanoparticles for use as magnetic hyperthermia agents has garnered increasing interest over the past several years. When designing these systems, the fundamentals of particle design play a key role in the observed specific absorption rate (SAR). This includes the particle's core size, polymer brush length, and colloidal arrangement. While the role of particle core size on the observed SAR has been significantly reported, the role of the polymer brush length has not attracted as much attention. It has recently been reported that for some suspensions linear aggregates form in the presence of an applied external magnetic field, i.e. chains of magnetic particles. The formation of these chains may have the potential for a dramatic impact on the biomedical application of these materials, specifically the efficiency of the particles to transfer magnetic energy to the surrounding cells. In this study we demonstrate the dependence of SAR on magnetite nanoparticle core size and brush length as well as observe the formation of magnetically induced colloidal arrangements. Colloidally stable magnetic nanoparticles were demonstrated to form linear aggregates in an alternating magnetic field. The length and distribution of the aggregates were dependent upon the stabilizing polymer molecular weight. As the molecular weight of the stabilizing layer increased, the magnetic interparticle interactions decreased therefore limiting chain formation. In addition, theoretical calculations demonstrated that interparticle spacing has a significant impact on the magnetic behavior of these materials. This work has several implications for the design of nanoparticle and magnetic hyperthermia systems, while improving understanding of how colloidal arrangement affects SAR.

  3. Exercise, Insulin Absorption Rates, and Artificial Pancreas Control

    NASA Astrophysics Data System (ADS)

    Frank, Spencer; Hinshaw, Ling; Basu, Rita; Basu, Ananda; Szeri, Andrew J.

    2016-11-01

    Type 1 Diabetes is characterized by an inability of a person to endogenously produce the hormone insulin. Because of this, insulin must be injected - usually subcutaneously. The size of the injected dose and the rate at which the dose reaches the circulatory system have a profound effect on the ability to control glucose excursions, and therefore control of diabetes. However, insulin absorption rates via subcutaneous injection are variable and depend on a number of factors including tissue perfusion, physical activity (vasodilation, increased capillary throughput), and other tissue geometric and physical properties. Exercise may also have a sizeable effect on the rate of insulin absorption, which can potentially lead to dangerous glucose levels. Insulin-dosing algorithms, as implemented in an artificial pancreas controller, should account accurately for absorption rate variability and exercise effects on insulin absorption. The aforementioned factors affecting insulin absorption will be discussed within the context of both fluid mechanics and data driven modeling approaches.

  4. Metal-framed spectacles and implants and specific absorption rate among adults and children using mobile phones at 900/1800/2100 MHz.

    PubMed

    Joó, Ervin; Szász, András; Szendrö, Péter

    2006-01-01

    The specific absorption rate (SAR) from mobile telephones at horizontal and vertical positions is investigated in human adult and child heads wearing metal-rim spectacles and having metallic implants. The SAR values calculated by Finite Difference Time Domain (FTDT) method are compared to the actual ANSI/IEEE standards and to the 900/1800/2100 MHz electromagnetic radiation limits according to EU standards. Our calculation shows a maximum of the cellular SAR in the child head, which in the case of metallic implant could be as much as 100% higher than in the adult head. The averaging on 1 and 10 g tissue-masses shows SAR generally under the limit of 519/1999/EC standards. However, in the case of 2100 MHz with vertical position of the phone for adults and of the 900 MHz for children with metallic implants the ANSI/IEEE limits are exceeded.

  5. Further studies of human whole-body radiofrequency absorption rates.

    PubMed

    Hill, D A

    1985-01-01

    Further studies of human whole-body radiofrequency (RF) absorption rates were carried out using a TEM-cell exposure system. Experiments were done at one frequency near the grounded resonance frequency (approximately 40 MHz), and at several below-resonance frequencies. Absorption rates are small for the K and H orientations of the body, even when grounded. For the body trunk in an E orientation, the absorption rate of a sitting person is about half of the rate for the same person standing with arms at the sides; the latter in turn is about half the rate for the same subject standing with arms over the head. Two-body interactions cause no increase in absorption rates for grounded people. They do, however, increase the absorption rates for subjects in an E orientation in free space; the largest interaction occurs when one subject is lambda/2 behind the other (as seen by the incident wave). When these results are applied to practical occupational exposure situations, the whole-body specific absorption rate does not exceed the ANSI limit of 0.4 W/kg for exposures permitted by the ANSI standard (C95.1-1982) at frequencies from 7 to 40 MHz.

  6. Correlation between relative growth rate and specific leaf area requires associations of specific leaf area with nitrogen absorption rate of roots.

    PubMed

    Osone, Yoko; Ishida, Atsushi; Tateno, Masaki

    2008-07-01

    Close correlations between specific leaf area (SLA) and relative growth rate (RGR) have been reported in many studies. However, theoretically, SLA by itself has small net positive effect on RGR because any increase in SLA inevitably causes a decrease in area-based leaf nitrogen concentration (LNCa), another RGR component. It was hypothesized that, for a correlation between SLA and RGR, SLA needs to be associated with specific nitrogen absorption rate of roots (SAR), which counteracts the negative effect of SLA on LNCa. Five trees and six herbs were grown under optimal conditions and relationships between SAR and RGR components were analyzed using a model based on balanced growth hypothesis. SLA varied 1.9-fold between species. Simulations predicted that, if SAR is not associated with SLA, this variation in SLA would cause a47% decrease in LNCa along the SLA gradient, leading to a marginal net positive effect on RGR. In reality, SAR was positively related to SLA, showing a 3.9-fold variation, which largely compensated for the negative effect of SLA on LNCa. Consequently, LNCa values were almost constant across species and a positive SLA-RGR relationship was achieved. These results highlight the importance of leaf-root interactions in understanding interspecific differences in RGR.

  7. Specific absorption rate and electric field measurements in the near field of six mobile phone base station antennas.

    PubMed

    Toivonen, Tommi; Toivo, Tim; Puranen, Lauri; Jokela, Kari

    2009-05-01

    In this article, the exposure to radio frequency electromagnetic fields was studied in close proximity (distances of 10, 100, 300, and 600 mm) to six base station antennas. The specific absorption rate (SAR) in 800 mm x 500 mm x 200 mm box phantom as well as unperturbed electric field (E) in air was measured. The results were used to determine whether the measurement of local maximum of unperturbed electric field can be used as a compliance check for local exposure. Also, the conservativeness of this assessment method compared to the ICNIRP basic restriction was studied. Moreover, the assessment of whole-body exposure was discussed and the distance ranges presented in which the ICNIRP limit for local exposure could be exceeded before the limit for whole-body SAR. These results show that the electric field measurement alone can be used for easy compliance check for the local exposure at all distances and for all antenna types studied. However, in some cases when the local peak value of E was compared directly to the ICNIRP reference level for unperturbed E, the exposure was overestimated only very slightly (by factor 1.1) compared to the basic restriction for localized SAR in a human, and hence these results can not be generalized to all antenna types. Moreover, it was shown that the limit for localized exposure could be exceeded before the limit for the whole-body average SAR, if the distance to the antenna was less than 240 mm.

  8. Magnetic Nanoparticles with High Specific Absorption Rate at Low Alternating Magnetic Field

    PubMed Central

    Kekalo, K.; Baker, I.; Meyers, R.; Shyong, J.

    2015-01-01

    This paper describes the synthesis and properties of a new type of magnetic nanoparticle (MNP) for use in the hyperthermia treatment of tumors. These particles consist of 2–4 nm crystals of gamma-Fe2O3 gathered in 20–40 nm aggregates with a coating of carboxymethyl-dextran, producing a zetasize of 110–120 nm. Despite their very low saturation magnetization (1.5–6.5 emu/g), the specific absorption rate (SAR) of the nanoparticles is 22–200 W/g at applied alternating magnetic field (AMF) with strengths of 100–500 Oe at a frequency of 160 kHz. PMID:26884816

  9. Adiabatic vs. non-adiabatic determination of specific absorption rate of ferrofluids

    NASA Astrophysics Data System (ADS)

    Natividad, Eva; Castro, Miguel; Mediano, Arturo

    2009-05-01

    The measurement of temperature variations in adiabatic conditions allows the determination of the specific absorption rate of magnetic nanoparticles and ferrofluids from the correct incremental expression, SAR=(1/ m MNP) C(Δ T/Δ t). However, when measurements take place in non-adiabatic conditions, one must approximate this expression by SAR≈ Cβ/ m MNP, where β is the initial slope of the temperature vs. time curve during alternating field application. The errors arising from the use of this approximation were estimated through several experiments with different isolating conditions, temperature sensors and sample-sensor contacts. It is concluded that small to appreciable errors can appear, which are difficult to infer or control.

  10. MRI-based anatomical model of the human head for specific absorption rate mapping

    PubMed Central

    Makris, Nikos; Angelone, Leonardo; Tulloch, Seann; Sorg, Scott; Kaiser, Jonathan; Kennedy, David

    2009-01-01

    In this study, we present a magnetic resonance imaging (MRI)-based, high-resolution, numerical model of the head of a healthy human subject. In order to formulate the model, we performed quantitative volumetric segmentation on the human head, using T1-weighted MRI. The high spatial resolution used (1 × 1 × 1 mm3), allowed for the precise computation and visualization of a higher number of anatomical structures than provided by previous models. Furthermore, the high spatial resolution allowed us to study individual thin anatomical structures of clinical relevance not visible by the standard model currently adopted in computational bioelectromagnetics. When we computed the electromagnetic field and specific absorption rate (SAR) at 7 Tesla MRI using this high-resolution model, we were able to obtain a detailed visualization of such fine anatomical structures as the epidermis/dermis, bone structures, bone-marrow, white matter and nasal and eye structures. PMID:18985401

  11. Impact of head morphology on local brain specific absorption rate from exposure to mobile phone radiation.

    PubMed

    Adibzadeh, Fatemeh; Bakker, Jurriaan F; Paulides, Margarethus M; Verhaart, René F; van Rhoon, Gerard C

    2015-01-01

    Among various possible health effects of mobile phone radiation, the risk of inducing cancer has the strongest interest of laymen and health organizations. Recently, the Interphone epidemiological study investigated the association between the estimated Radio Frequency (RF) dose from mobile phones and the risk of developing a brain tumor. Their dosimetric analysis included over 100 phone models but only two homogeneous head phantoms. So, the potential impact of individual morphological features on global and local RF absorption in the brain was not investigated. In this study, we performed detailed dosimetric simulations for 20 head models and quantified the variation of RF dose in different brain regions as a function of head morphology. Head models were exposed to RF fields from generic mobile phones at 835 and 1900 MHz in the "tilted" and "cheek" positions. To evaluate the local RF dose variation, we used and compared two different post-processing methods, that is, averaging specific absorption rate (SAR) over Talairach regions and over sixteen predefined 1 cm(3) cube-shaped field-sensors. The results show that the variation in the averaged SAR among the heads can reach up to 16.4 dB at a 1 cm(3) cube inside the brain (field-sensor method) and alternatively up to 15.8 dB in the medulla region (Talairach method). In conclusion, we show head morphology as an important uncertainty source for dosimetric studies of mobile phones. Therefore, any dosimetric analysis dealing with RF dose at a specific region in the brain (e.g., tumor risk analysis) should be based upon real morphology.

  12. A study on transmission characteristics and specific absorption rate using impedance-matched electrodes for various human body communication.

    PubMed

    Machida, Yuta; Yamamoto, Takahiko; Koshiji, Kohji

    2013-01-01

    Human body communication (HBC) is a new communication technology that has presented potential applications in health care and elderly support systems in recent years. In this study, which is focused on a wearable transmitter and receiver for HBC in a body area network (BAN), we performed electromagnetic field analysis and simulation using the finite difference time domain (FDTD) method with various models of the human body. Further we redesigned a number of impedance-matched electrodes to allow transmission without stubs or transformers. The specific absorption rate (SAR) and transmission characteristics S21 of these electrode structures were compared for several models.

  13. Fault creep rates of the Chaman fault (Afghanistan and Pakistan) inferred from InSAR

    NASA Astrophysics Data System (ADS)

    Barnhart, William D.

    2017-01-01

    The Chaman fault is the major strike-slip structural boundary between the India and Eurasia plates. Despite sinistral slip rates similar to the North America-Pacific plate boundary, no major (>M7) earthquakes have been documented along the Chaman fault, indicating that the fault either creeps aseismically or is at a late stage in its seismic cycle. Recent work with remotely sensed interferometric synthetic aperture radar (InSAR) time series documented a heterogeneous distribution of fault creep and interseismic coupling along the entire length of the Chaman fault, including an 125 km long creeping segment and an 95 km long locked segment within the region documented in this study. Here I present additional InSAR time series results from the Envisat and ALOS radar missions spanning the southern and central Chaman fault in an effort to constrain the locking depth, dip, and slip direction of the Chaman fault. I find that the fault deviates little from a vertical geometry and accommodates little to no fault-normal displacements. Peak-documented creep rates on the fault are 9-12 mm/yr, accounting for 25-33% of the total motion between India and Eurasia, and locking depths in creeping segments are commonly shallower than 500 m. The magnitude of the 1892 Chaman earthquake is well predicted by the total area of the 95 km long coupled segment. To a first order, the heterogeneous distribution of aseismic creep combined with consistently shallow locking depths suggests that the southern and central Chaman fault may only produce small to moderate earthquakes (

  14. FDTD based SAR analysis in human head using irregular volume averaging techniques of different resolutions at GSM 900 band

    NASA Astrophysics Data System (ADS)

    Ali, Md Faruk; Ray, Sudhabindu

    2014-06-01

    Specific absorption rate (SAR) induced inside human head in the near-field of a mobile phone antenna has been investigated for three different SAR resolutions using Finite Difference in Time Domain (FDTD) method at GSM 900 band. Voxel based anthropomorphic human head model, consisting of different anatomical tissues, is used to calculate the peak SAR values averaged over 10-g, 1-g and 0.1-g mass. It is observed that the maximum local SAR increases significantly for smaller mass averages.

  15. Toward Online Adaptive Hyperthermia Treatment Planning: Correlation Between Measured and Simulated Specific Absorption Rate Changes Caused by Phase Steering in Patients

    SciTech Connect

    Kok, H. Petra; Ciampa, Silvia; Kroon-Oldenhof, Rianne de; Steggerda-Carvalho, Eva J.; Stam, Gerard van; Zum Vörde Sive Vörding, Paul J.; Stalpers, Lukas J.A.; Geijsen, Elisabeth D.; Bardati, Fernando; Bel, Arjan; Crezee, Johannes

    2014-10-01

    Purpose: Hyperthermia is the clinical application of heat, in which tumor temperatures are raised to 40°C to 45°C. This proven radiation and chemosensitizer significantly improves clinical outcome for several tumor sites. Earlier studies of the use of pre-treatment planning for hyperthermia showed good qualitative but disappointing quantitative reliability. The purpose of this study was to investigate whether hyperthermia treatment planning (HTP) can be used more reliably for online adaptive treatment planning during locoregional hyperthermia treatments. Methods and Materials: This study included 78 treatment sessions for 15 patients with non-muscle-invasive bladder cancer. At the start of treatments, temperature rise measurements were performed with 3 different antenna settings optimized for each patient, from which the absorbed power (specific absorption rate [SAR]) was derived. HTP was performed based on a computed tomography (CT) scan in treatment position with the bladder catheter in situ. The SAR along the thermocouple tracks was extracted from the simulated SAR distributions. Correlations between measured and simulated (average) SAR values were determined. To evaluate phase steering, correlations between the changes in simulated and measured SAR values averaged over the thermocouple probe were determined for all 3 combinations of antenna settings. Results: For 42% of the individual treatment sessions, the correlation coefficient between measured and simulated SAR profiles was higher than 0.5, whereas 58% showed a weak correlation (R of <0.5). The overall correlation coefficient between measured and simulated average SAR was weak (R=0.31; P<.001). The measured and simulated changes in average SAR after adapting antenna settings correlated much better (R=0.70; P<.001). The ratio between the measured and simulated quotients of maximum and average SARs was 1.03 ± 0.26 (mean ± SD), indicating that HTP can also correctly predict the relative amplitude of

  16. Subsidence rate monitoring of Aghajari oil field based on Differential SAR Interferometry

    NASA Astrophysics Data System (ADS)

    Moghaddam, N. Fouladi; Sahebi, M. R.; Matkan, A. A.; Roostaei, M.

    2013-06-01

    Land subsidence, due to natural or anthropogenic processes, causes significant costs in both economic and structural aspects. That part of subsidence observed most is the result of human activities, which relates to underground exploitation. Since the gradual surface deformation is a consequence of hydrocarbon reservoirs extraction, the process of displacement monitoring is amongst the petroleum industry priorities. Nowadays, Differential SAR Interferometry, in which satellite images are utilized for elevation change detection and analysis - in a millimetre scale, has proved to be a more real-time and cost-effective technology in contrast to the traditional surveying method. In this study, surface displacements in Aghajari oil field, i.e. one of the most industrious Iranian hydrocarbon sites, are being examined using radar observations. As in a number of interferograms, the production wells inspection reveals that surface deformation signals develop likely due to extraction in a period of several months. In other words, different subsidence or uplift rates and deformation styles occur locally depending on the geological conditions and excavation rates in place.

  17. Accuracy improvement of the ice flow rate measurements on Antarctic ice sheet by DInSAR method

    NASA Astrophysics Data System (ADS)

    Shiramizu, Kaoru; Doi, Koichiro; Aoyama, Yuichi

    2015-04-01

    DInSAR (Differential Interferometric Synthetic Aperture Radar) is an effective tool to measure the flow rate of slow flowing ice streams on Antarctic ice sheet with high resolution. In the flow rate measurement by DInSAR method, we use Digital Elevation Model (DEM) at two times in the estimating process. At first, we use it to remove topographic fringes from InSAR images. And then, it is used to project obtained displacements along Line-Of-Sight (LOS) direction to the actual flow direction. ASTER-GDEM widely-used for InSAR prosessing of the data of polar region has a lot of errors especially in the inland ice sheet area. Thus the errors yield irregular flow rates and directions. Therefore, quality of DEM has a substantial influence on the ice flow rate measurement. In this study, we created a new DEM (resolution 10m; hereinafter referred to as PRISM-DEM) based on ALOS/PRISM images, and compared PRISM-DEM and ASTER-GDEM. The study area is around Skallen, 90km south from Syowa Station, in the southern part of Sôya Coast, East Antarctica. For making DInSAR images, we used ALOS/PALSAR data of 13 pairs (Path633, Row 571-572), observed during the period from November 23, 2007 through January 16, 2011. PRISM-DEM covering the PALSAR scene was created from nadir and backward view images of ALOS/PRISM (Observation date: 2009/1/18) by applying stereo processing with a digital mapping equipment, and then the automatically created a primary DEM was corrected manually to make a final DEM. The number of irregular values of actual ice flow rate was reduced by applying PRISM-DEM compared with that by applying ASTER-GDEM. Additionally, an averaged displacement of approximately 0.5cm was obtained by applying PRISM-DEM over outcrop area, where no crustal displacement considered to occur during the recurrence period of ALOS/PALSAR (46days), while an averaged displacement of approximately 1.65 cm was observed by applying ASTER-GDEM. Since displacements over outcrop area are considered

  18. Relationship between peak spatial-averaged specific absorption rate and peak temperature elevation in human head in frequency range of 1-30 GHz.

    PubMed

    Morimoto, Ryota; Laakso, Ilkka; De Santis, Valerio; Hirata, Akimasa

    2016-07-01

    This study investigates the relationship between the peak temperature elevation and the peak specific absorption rate (SAR) averaged over 10 g of tissue in human head models in the frequency range of 1-30 GHz. As a wave source, a half-wave dipole antenna resonant at the respective frequencies is located in the proximity of the pinna. The bioheat equation is used to evaluate the temperature elevation by employing the SAR, which is computed by electromagnetic analysis, as a heat source. The computed SAR is post-processed by calculating the peak spatial-averaged SAR with six averaging algorithms that consider different descriptions provided in international guidelines and standards, e.g. the number of tissues allowed in the averaging volume, different averaging shapes, and the consideration of the pinna. The computational results show that the SAR averaging algorithms excluding the pinna are essential when correlating the peak temperature elevation in the head excluding the pinna. In the averaging scheme considering an arbitrary shape, for better correlation, multiple tissues should be included in the averaging volume rather than a single tissue. For frequencies higher than 3-4 GHz, the correlation for peak temperature elevation in the head excluding the pinna is modest for the different algorithms. The 95th percentile value of the heating factor as well as the mean and median values derived here would be helpful for estimating the possible temperature elevation in the head.

  19. FDTD calculations of specific energy absorption rate in a seated voxel model of the human body from 10 MHz to 3 GHz.

    PubMed

    Findlay, R P; Dimbylow, P J

    2006-05-07

    Finite-difference time-domain (FDTD) calculations have been performed to investigate the frequency dependence of the specific energy absorption rate (SAR) in a seated voxel model of the human body. The seated model was derived from NORMAN (NORmalized MAN), an anatomically realistic voxel phantom in the standing posture with arms to the side. Exposure conditions included both vertically and horizontally polarized plane wave electric fields between 10 MHz and 3 GHz. The resolution of the voxel model was 4 mm for frequencies up to 360 MHz and 2 mm for calculations in the higher frequency range. The reduction in voxel size permitted the calculation of SAR at these higher frequencies using the FDTD method. SAR values have been calculated for the seated adult phantom and scaled versions representing 10-, 5- and 1-year-old children under isolated and grounded conditions. These scaled models do not exactly reproduce the dimensions and anatomy of children, but represent good geometric information for a seated child. Results show that, when the field is vertically polarized, the sitting position causes a second, smaller resonance condition not seen in resonance curves for the phantom in the standing posture. This occurs at approximately 130 MHz for the adult model when grounded. Partial-body SAR calculations indicate that the upper and lower regions of the body have their own resonant frequency at approximately 120 MHz and approximately 160 MHz, respectively, when the grounded adult model is orientated in the sitting position. These combine to produce this second resonance peak in the whole-body averaged SAR values calculated. Two resonance peaks also occur for the sitting posture when the incident electric field is horizontally polarized. For the adult model, the peaks in the whole-body averaged SAR occur at approximately 180 and approximately 600 MHz. These peaks are due to resonance in the arms and feet, respectively. Layer absorption plots and colour images of SAR in

  20. Definition of a parameter for a typical specific absorption rate under real boundary conditions of cellular phones in a GSM networkd

    NASA Astrophysics Data System (ADS)

    Gerhardt, D.

    2003-05-01

    Using cellular phones the specific absorption rate (SAR) as a physical value must observe established and internationally defined levels to guarantee human protection. To assess human protection it is necessary to guarantee safety under worst-case conditions (especially maximum transmitting power) using cellular phones. To evaluate the exposure to electromagnetic fields under normal terms of use of cellular phones the limitations of the specific absorption rate must be pointed out. In a mobile radio network normal terms of use of cellular phones, i.e. in interconnection with a fixed radio transmitter of a mobile radio network, power control of the cellular phone as well as the antenna diagram regarding a head phantom are also significant for the real exposure. Based on the specific absorption rate, the antenna diagram regarding a head phantom and taking into consideration the power control a new parameter, the typical absorption rate (SARtyp), is defined in this contribution. This parameter indicates the specific absorption rate under average normal conditions of use. Constant radio link attenuation between a cellular phone and a fixed radio transmitter for all mobile models tested was assumed in order to achieve constant field strength at the receiving antenna of the fixed radio transmitter as a result of power control. The typical specific absorption rate is a characteristic physical value of every mobile model. The typical absorption rate was calculated for 16 different mobile models and compared with the absorption rate at maximum transmitting power. The results confirm the relevance of the definition of this parameter (SARtyp) as opposed to the specific absorption rate as a competent and applicable method to establish the real mean exposure from a cellular phone in a mobile radio network. The typical absorption rate provides a parameter to assess electromagnetic fields of a cellular phone that is more relevant to the consumer.

  1. Specific absorption rate levels measured in a phantom head exposed to radio frequency transmissions from analog hand-held mobile phones

    SciTech Connect

    Anderson, V.; Joyner, K.H.

    1995-05-01

    Electric fields (E-fields) induced within a phantom head from exposure to three different advanced mobile phone system (AMPS) hand-held telephones were measured using an implantable E-Field probe. Measurements were taken in the eye nearest the phone and along a lateral scan through the brain from its center to the side nearest the phone. During measurement, the phones were positioned alongside the phantom head as in typical use and were configured to transmit at maximum power (600 mW nominal). The specific absorption rate (SAR) was calculated from the in situ E-field measurements, which varied significantly between phone models and antenna configuration. The SARs induced in the eye ranged from 0.007 to 0.21 W/kg. Metal-framed spectacles enhanced SAR levels in the eye by 9--29%. In the brain, maximum levels were recorded at the measurement point closest to the phone and ranged from 0.12 to 0.83 W/kg. These SARs are below peak spatial limits recommended in the US and Australian national standards and the IRPA guidelines for safe exposure to radio frequency (RF) electromagnetic fields. Furthermore, a detailed thermal analysis of the eye indicated only a 0.022 C maximum steady-state temperature rise in the eye from a uniform SAR loading of 0.21 W/kg. A more approximate thermal analysis in the brain also indicated only a small maximum temperature rise of 0.034 C for a local SAR loading of 0.83 W/kg.

  2. Analysis of in situ electric field and specific absorption rate in human models for wireless power transfer system with induction coupling

    NASA Astrophysics Data System (ADS)

    Sunohara, Tetsu; Hirata, Akimasa; Laakso, Ilkka; Onishi, Teruo

    2014-07-01

    This study investigates the specific absorption rate (SAR) and the in situ electric field in anatomically based human models for the magnetic field from an inductive wireless power transfer system developed on the basis of the specifications of the wireless power consortium. The transfer system consists of two induction coils covered by magnetic sheets. Both the waiting and charging conditions are considered. The transfer frequency considered in this study is 140 kHz, which is within the range where the magneto-quasi-static approximation is valid. The SAR and in situ electric field in the chest and arm of the models are calculated by numerically solving the scalar potential finite difference equation. The electromagnetic modelling of the coils in the wireless power transfer system is verified by comparing the computed and measured magnetic field distributions. The results indicate that the peak value of the SAR averaged over a 10 g of tissue and that of the in situ electric field are 72 nW kg-1 and 91 mV m-1 for a transmitted power of 1 W, Consequently, the maximum allowable transmitted powers satisfying the exposure limits of the SAR (2 W kg-1) and the in situ electric field (18.9 V m-1) are found to be 28 MW and 43 kW. The computational results show that the in situ electric field in the chest is the most restrictive factor when compliance with the wireless power transfer system is evaluated according to international guidelines.

  3. SARS Basics

    MedlinePlus

    ... coronavirus (SARS-CoV). SARS was first reported in Asia in February 2003. Over the next few months, ... countries in North America, South America, Europe, and Asia before the SARS global outbreak of 2003 was ...

  4. The relationship between specific absorption rate and temperature elevation in anatomically based human body models for plane wave exposure from 30 MHz to 6 GHz.

    PubMed

    Hirata, Akimasa; Laakso, Ilkka; Oizumi, Takuya; Hanatani, Ryuto; Chan, Kwok Hung; Wiart, Joe

    2013-02-21

    According to the international safety guidelines/standard, the whole-body-averaged specific absorption rate (Poljak et al 2003 IEEE Trans. Electromagn. Compat. 45 141-5) and the peak spatial average SAR are used as metrics for human protection from whole-body and localized exposures, respectively. The IEEE standard (IEEE 2006 IEEE C95.1) indicates that the upper boundary frequency, over which the whole-body-averaged SAR is deemed to be the basic restriction, has been reduced from 6 to 3 GHz, because radio-wave energy is absorbed around the body surface when the frequency is increased. However, no quantitative discussion has been provided to support this description especially from the standpoint of temperature elevation. It is of interest to investigate the maximum temperature elevation in addition to the core temperature even for a whole-body exposure. In the present study, using anatomically based human models, we computed the SAR and the temperature elevation for a plane-wave exposure from 30 MHz to 6 GHz, taking into account the thermoregulatory response. As the primary result, we found that the ratio of the core temperature elevation to the whole-body-averaged SAR is almost frequency independent for frequencies below a few gigahertz; the ratio decreases above this frequency. At frequencies higher than a few gigahertz, core temperature elevation for the same whole-body averaged SAR becomes lower due to heat convection from the skin to air. This lower core temperature elevation is attributable to skin temperature elevation caused by the power absorption around the body surface. Then, core temperature elevation even for whole-body averaged SAR of 4 W kg(-1) with the duration of 1 h was at most 0.8 °C, which is smaller than a threshold considered in the safety guidelines/standard. Further, the peak 10 g averaged SAR is correlated with the maximum body temperature elevations without extremities and pinna over the frequencies considered. These findings

  5. Observations on the relation between alcohol absorption and the rate of gastric emptying.

    PubMed Central

    Holt, S

    1981-01-01

    Alcohol (ethanol) is absorbed slowly from the stomach and rapidly from the small intestine, and the rate of its absorption depends on the rate of gastric emptying. When gastric emptying is fast, the absorption of alcohol is fast. When gastric emptying is slow the absorption of alcohol is delayed and peak blood alcohol concentrations are reduced. Alterations of the gastric emptying rate, which may have a physiologic, pharmacologic or pathologic cause, markedly influence the rate of alcohol absorption. The gastric emptying rate makes an important contribution to inter- and intraindividual variations in the rate of alcohol absorption and therefore the timing and magnitude of the acute intoxicating effect of an oral dose of alcohol. PMID:7459787

  6. Analysis of specific absorption rate and internal electric field in human biological tissues surrounding an air-core coil-type transcutaneous energy transmission transformer.

    PubMed

    Shiba, Kenji; Zulkifli, Nur Elina Binti; Ishioka, Yuji

    2016-11-21

    In this study, we analyzed the internal electric field E and specific absorption rate (SAR) of human biological tissues surrounding an air-core coil transcutaneous energy transmission transformer. Using an electromagnetic simulator, we created a model of human biological tissues consisting of a dry skin, wet skin, fat, muscle, and cortical bone. A primary coil was placed on the surface of the skin, and a secondary coil was located subcutaneously inside the body. The E and SAR values for the model representing a 34-year-old male subject were analyzed using electrical frequencies of 0.3-1.5 MHz. The transmitting power was 15 W, and the load resistance was 38.4 Ω. The results showed that the E values were below the International Commission on Non-ionizing Radiation Protection (ICNIRP) limit for the general public exposure between the frequencies of 0.9 and 1.5 MHz, and SAR values were well below the limit prescribed by the ICNIRP for the general public exposure between the frequencies of 0.3 and 1.2 MHz.

  7. Proportion-corrected scaled voxel models for Japanese children and their application to the numerical dosimetry of specific absorption rate for frequencies from 30 MHz to 3 GHz

    NASA Astrophysics Data System (ADS)

    Nagaoka, Tomoaki; Kunieda, Etsuo; Watanabe, Soichi

    2008-12-01

    The development of high-resolution anatomical voxel models of children is difficult given, inter alia, the ethical limitations on subjecting children to medical imaging. We instead used an existing voxel model of a Japanese adult and three-dimensional deformation to develop three voxel models that match the average body proportions of Japanese children at 3, 5 and 7 years old. The adult model was deformed to match the proportions of a child by using the measured dimensions of various body parts of children at 3, 5 and 7 years old and a free-form deformation technique. The three developed models represent average-size Japanese children of the respective ages. They consist of cubic voxels (2 mm on each side) and are segmented into 51 tissues and organs. We calculated the whole-body-averaged specific absorption rates (WBA-SARs) and tissue-averaged SARs for the child models for exposures to plane waves from 30 MHz to 3 GHz; these results were then compared with those for scaled down adult models. We also determined the incident electric-field strength required to produce the exposure equivalent to the ICNIRP basic restriction for general public exposure, i.e., a WBA-SAR of 0.08 W kg-1.

  8. Analysis of in situ electric field and specific absorption rate in human models for wireless power transfer system with induction coupling.

    PubMed

    Sunohara, Tetsu; Hirata, Akimasa; Laakso, Ilkka; Onishi, Teruo

    2014-07-21

    This study investigates the specific absorption rate (SAR) and the in situ electric field in anatomically based human models for the magnetic field from an inductive wireless power transfer system developed on the basis of the specifications of the wireless power consortium. The transfer system consists of two induction coils covered by magnetic sheets. Both the waiting and charging conditions are considered. The transfer frequency considered in this study is 140 kHz, which is within the range where the magneto-quasi-static approximation is valid. The SAR and in situ electric field in the chest and arm of the models are calculated by numerically solving the scalar potential finite difference equation. The electromagnetic modelling of the coils in the wireless power transfer system is verified by comparing the computed and measured magnetic field distributions. The results indicate that the peak value of the SAR averaged over a 10 g of tissue and that of the in situ electric field are 72 nW kg(-1) and 91 mV m(-1) for a transmitted power of 1 W, Consequently, the maximum allowable transmitted powers satisfying the exposure limits of the SAR (2 W kg(-1)) and the in situ electric field (18.9 V m(-1)) are found to be 28 MW and 43 kW. The computational results show that the in situ electric field in the chest is the most restrictive factor when compliance with the wireless power transfer system is evaluated according to international guidelines.

  9. Induction of an adaptive response in human blood lymphocytes exposed to radiofrequency fields: influence of the universal mobile telecommunication system (UMTS) signal and the specific absorption rate.

    PubMed

    Zeni, Olga; Sannino, Anna; Romeo, Stefania; Massa, Rita; Sarti, Maurizio; Reddy, Abishek B; Prihoda, Thomas J; Vijayalaxmi; Scarfì, Maria Rosaria

    2012-08-30

    The induction of an adaptive response (AR) was examined in human peripheral blood lymphocytes exposed to non-ionizing radiofrequency fields (RF). Cells from nine healthy human volunteers were stimulated for 24h with phytohaemagglutinin and then exposed for 20h to an adaptive dose (AD) of a 1950MHz RF UMTS (universal mobile telecommunication system) signal used for mobile communications, at different specific absorption rates (SAR) of 1.25, 0.6, 0.3, and 0.15W/kg. This was followed by treatment of the cells at 48h with a challenge dose (CD) of 100ng/ml mitomycin C (MMC). Lymphocytes were collected at the end of the 72h total culture period. The cytokinesis-block method was used to record the frequency of micronuclei (MN) as genotoxicity end-point. When lymphocytes from six donors were pre-exposed to RF at 0.3W/kg SAR and then treated with MMC, these cells showed a significant reduction in the frequency of MN, compared with the cells treated with MMC alone; this result is indicative of induction of AR. The results from our earlier study indicated that lymphocytes that were stimulated for 24h, exposed for 20h to a 900MHz RF GSM (global system for mobile communication) signal at 1.25W/kg SAR and then treated with 100ng/ml MMC, also exhibited AR. These overall data suggest that the induction of AR depends on RF frequency, type of the signal and SAR. Further characterization of RF-induced AR is in progress.

  10. Accumulation Rates in the Dry Snow Zone of the Greenland Ice Sheet Inferred from L-band InSAR Data

    NASA Astrophysics Data System (ADS)

    Chen, A. C.; Zebker, H. A.

    2012-12-01

    The Greenland ice sheet contains about 2.9 million km3 of ice and would raise global sea levels by about 7.1 m if it melted completely. Two unusually large iceberg calving events at Petermann Glacier in the past several years, along with the unusually large extent of ice sheet melt this summer point to the relevance of understanding the mass balance of the Greenland ice sheet. In this study, we use data from the PALSAR instrument aboard the ALOS satellite to form L-band (23-centimeter carrier wavelength) InSAR images of the dry snow zone of the Greenland ice sheet. We form geocoded differential interferograms, using the ice sheet elevation model produced by Howat et.al. [1]. By applying phase and radiometric calibration, we can examine interferograms formed between any pair of transmit and receive polarization channels. In co-polarized interferograms, the InSAR correlation ranges from about 0.35 at the summit (38.7 deg W, 73.0 deg N) where accumulation is about 20 cm w.e./yr to about 0.70 at the north-eastern part of the dry snow zone (35.1 deg W, 77.1 deg N), where accumulation is about 11.7 cm w.e./yr. Cross-polarized interferograms show similar geographic variation with overall lower correlation. We compare our InSAR data with in-situ measurements published by Bales et.al. [2]. We examine the applicability of dense-medium radiative transfer electromagnetic scattering models for estimating accumulation rates from L-band InSAR data. The large number and broad coverage of ALOS scenes acquired between 2007 and 2009 with good InSAR coherence at 46-day repeat times and 21.5 degree incidence angles gives us the opportunity to examine the empirical relationship between in-situ accumulation rate observations and the polarimetric InSAR correlation and radar brightness at this particular imaging geometry. This helps us quantify the accuracy of accumulation rates estimated from InSAR data. In some regions, 46-day interferograms acquired in the winters of several consecutive

  11. Approach for an improved experimental evaluation of the specific absorption rate in magnetic fluid hyperthermia

    NASA Astrophysics Data System (ADS)

    Iacob, N.; Schinteie, G.; Palade, P.; Kuncser, V.

    2015-04-01

    A new methodology for the accurate determination of the specific absorption rate of ferrofluids with magnetite nanoparticles of average size of about 10 nm subjected to alternative current magnetic fields is proposed. A simple numerical compensation of the heating rates by the cooling rates obtained at similar temperatures is employed. Comparisons of the as-obtained adiabatic heating curves with theoretical evaluations are discussed.

  12. Carbonic anhydrase promotes the absorption rate of CO2 in post-combustion processes.

    PubMed

    Vinoba, Mari; Bhagiyalakshmi, Margandan; Grace, Andrews Nirmala; Kim, Dae Hoon; Yoon, Yeoil; Nam, Sung Chan; Baek, Il Hyun; Jeong, Soon Kwan

    2013-05-09

    The rate of carbon dioxide (CO2) absorption by monoethanol amine (MEA), diethanol amine (DEA), N-methyl-2,2'-iminodiethanol (MDEA), and 2-amino-2-methyl 1-propanol (AMP) solutions was found to be enhanced by the addition of bovine carbonic anhydrase (CA), has been investigated using a vapor-liquid equilibrium (VLE) device. The enthalpy (-ΔHabs) of CO2 absorption and the absorption capacities of aqueous amines were measured in the presence and/or absence of CA enzyme via differential reaction calorimeter (DRC). The reaction temperature (ΔT) under adiabatic conditions was determined based on the DRC analysis. Bicarbonate and carbamate species formation mechanisms were elucidated by (1)H and (13)C NMR spectral analysis. The overall CO2 absorption rate (flux) and rate constant (kapp) followed the order MEA > DEA > AMP > MDEA in the absence or presence of CA. Hydration of CO2 by MDEA in the presence of CA directly produced bicarbonate, whereas AMP produced unstable carbamate intermediate, then underwent hydrolytic reaction and converted to bicarbonate. The MDEA > AMP > DEA > MEA reverse ordering of the enhanced CO2 flux and kapp in the presence of CA was due to bicarbonate formation by the tertiary and sterically hindered amines. Thus, CA increased the rate of CO2 absorption by MDEA by a factor of 3 relative to the rate of absorption by MDEA alone. The thermal effects suggested that CA yielded a higher activity at 40 °C.

  13. GPS and InSAR constraints on vertical tectonic motion improve the estimate of slip rate of the San Andreas Fault in southern California

    NASA Astrophysics Data System (ADS)

    Hammond, William; Johnson, Kaj; Blewitt, Geoff; Kreemer, Corné; Weldon, Ray; Burgette, Reed

    2014-05-01

    The San Andreas fault (SAF) is the fastest slipping member of a complex plate boundary system that poses a looming earthquake hazard to millions of people in southern California. Seismic hazard analysis products rely on accurate estimates of fault slip rate in order to best forecast the shaking from future damaging earthquakes. Data from geodetic GPS networks such as the EarthScope Plate Boundary Observatory, SCIGN, and other municipal networks place strong constraints on faults slip rates. However, models based geodetic measurements in the eastern Transverse Ranges suffer from uncertainties in fault dip, slip history, and viscoelastic Earth structure. Part of the problem is that data are commonly limited to horizontal interseismic rates of motion at GPS stations. Here we present results of integrated analysis of GPS and space-based InSAR data that together provide a high-resolution three-component estimation of the interseismic velocity field around the SAF. Aligning the InSAR to GPS mitigates long wavelength errors in InSAR while increasing the density of measurements between geographically sparse GPS stations. We use solutions from our GPS mega-network analysis of over 12,000 globally distributed stations processed using the GIPSY-OASIS software. Solutions are aligned to our new North America fixed reference frame (NA12), which provides strong vertical reference to compare rates across the plate boundary. Vertical data are considered if the station has at least 4 years of data, have time series that are fit well by a linear plus seasonal terms plus steps from known equipment changes and earthquakes. We use over 750 ERS and ENVISAT radar scenes from between 1992 and 2009 obtained from the WinSAR archive, including 4 frames from 5 tracks to form over 10,000 interferograms, providing line-of-sight (LOS) velocities for overlapping domains. To separate the contributions from vertical and horizontal signals, we align the InSAR LOS rates to the GPS LOS rates and

  14. Numerical analysis of specific absorption rate in the human head due to a 13.56 MHz RFID-based intra-ocular pressure measurement system

    NASA Astrophysics Data System (ADS)

    Hirtl, Rene; Schmid, Gernot

    2013-09-01

    A modern wireless intra-ocular pressure monitoring system, based on 13.56 MHz inductively coupled data transmission, was dosimetrically analyzed with respect to the specific absorption rate (SAR) induced inside the head and the eye due to the electromagnetic field exposure caused by the reader antenna of the transmission system. The analysis was based on numerical finite difference time domain computations using a high resolution anatomical eye model integrated in a modern commercially available anatomical model of a male head. Three different reader antenna configurations, a 7-turn elliptic (30 mm × 50 mm) antenna at 12 mm distance from the eye, a flexible circular antenna (60 mm diameter, 8 turns on 2 mm substrate) directly attached to the skin, and a circular 7-turn antenna (30 mm diameter at 12 mm distance to the eye) were analyzed, respectively. Possible influences of the eye-lid status (closed or opened) and the transponder antenna contained in a contact lens directly attached to the eye were taken into account. The results clearly demonstrated that for typical reader antenna currents required for proper data transmission, the SAR values remain far below the limits for localized exposure of the head, as defined by the International Commission for Non-Ionizing Radiation Protection. Particularly the induced SAR inside the eye was found to be substantially (orders of magnitudes for typical reader antenna currents in the order of 1 A turn) below values which have been reported to be critical with respect to thermally induced adverse health effects in eye tissues.

  15. 3D finite element simulation of effects of deflection rate on energy absorption for TRIP steel

    NASA Astrophysics Data System (ADS)

    Hayashi, Asuka; Pham, Hang; Iwamoto, Takeshi

    2015-09-01

    Recently, with the requirement of lighter weight and more safety for a design of automobile, energy absorption capability of structural materials has become important. TRIP (Transformation-induced Plasticity) steel is expected to apply to safety members because of excellent energy absorption capability and ductility. Past studies proved that such excellent characteristics in TRIP steel are dominated by strain-induced martensitic transformation (SIMT) during plastic deformation. Because SIMT strongly depends on deformation rate and temperature, an investigation of the effects of deformation rate and temperature on energy absorption in TRIP is essential. Although energy absorption capability of material can be estimated by J-integral experimentally by using pre-cracked specimen, it is difficult to determine volume fraction of martensite and temperature rise during the crack extension. In addition, their effects on J-integral, especially at high deformation rate in experiment might be quite hard. Thus, a computational prediction needs to be performed. In this study, bending deformation behavior of pre-cracked specimen until the onset point of crack extension are predicted by 3D finite element simulation based on the transformation kinetics model proposed by Iwamoto et al. (1998). It is challenged to take effects of temperature, volume fraction of martensite and deformation rate into account. Then, the mechanism for higher energy absorption characteristic will be discussed.

  16. Measurement of the absorption rate of carbon dioxide into aqueous diethanolamine

    SciTech Connect

    Rowley, R.L.; Adams, M.E.; Marshall, T.L.; Oscarson, J.L.; Wilding, W.V.; Anderson, D.J.

    1998-05-01

    Aqueous alkanolamine solutions are commonly used in natural gas sweetening processes to remove the acid gases CO{sub 2} and H{sub 2}S. Absorption rates of gaseous CO{sub 2} into aqueous diethanolamine (DEA) solutions were measured in a quiescent, inverted-tube diffusiometer by monitoring the rate of pressure drop. The absorption rate was found to be insensitive to the diffusion coefficient of CO{sub 2} in solution but very sensitive to the diffusion rate of bicarbonate, protonated DEA, and carbamate ions. Evidence also suggested that chemical reaction equilibrium is rapid relative to diffusion. The diffusion coefficient of DEA in water was also measured using a Taylor dispersion apparatus. A numerical model was developed and used to regress diffusion coefficients of bicarbonate, carbamate, and protonated amine from measured absorption rates. CO{sub 2} absorption rates and diffusion coefficients of bicarbonate, carbamate, and protonated DEA were obtained at 298.2 K and 318.2 K in solutions containing 20, 35, and 50 mass % DEA in water.

  17. A study of energy absorption rate in a quantum dot and metallic nanosphere hybrid system

    NASA Astrophysics Data System (ADS)

    Schindel, Daniel; Singh, Mahi R.

    2015-09-01

    We have studied energy absorption rate in a quantum dot-metallic nanosphere system embedded on a dielectric substrate. We applied a control field to induce dipole moments in the quantum dot and the metal nanosphere, and monitored the energy absorption using a probe field. These external fields induce dipole moments in the metal nanosphere and the quantum dot, and these two structures interact with one another via the dipole-dipole interaction. The density matrix method was used to evaluate the absorption, indicating that it can be shifted by moving the metal nanosphere close to the quantum dot. Also, absorption efficiency can either be quenched or enhanced by the addition of a metal nanosphere. This hybrid system can be used to create ultrafast switching and sensing nanodevices.

  18. Energy absorption at high strain rate of glass fiber reinforced mortars

    NASA Astrophysics Data System (ADS)

    Fenu, Luigi; Forni, Daniele; Cadoni, Ezio

    2015-09-01

    In this paper, the dynamic behaviour of cement mortars reinforced with glass fibers was studied. The influence of the addition of glass fibers on energy absorption and tensile strength at high strain-rate was investigated. Static tests in compression, in tension and in bending were first performed. Dynamic tests by means of a Modified Hopkinson Bar were then carried out in order to investigate how glass fibers affected energy absorption and tensile strength at high strain-rate of the fiber reinforced mortar. The Dynamic Increase Factor (DIF) was finally evaluated.

  19. A review of lung-to-blood absorption rates for radon progeny.

    PubMed

    Marsh, J W; Bailey, M R

    2013-12-01

    The International Commission on Radiological Protection (ICRP) Publication 66 Human Respiratory Tract Model (HRTM) treats clearance of materials from the respiratory tract as a competitive process between absorption into blood and particle transport to the alimentary tract and lymphatics. The ICRP recommended default absorption rates for lead and polonium (Type M) in ICRP Publication 71 but stated that the values were not appropriate for short-lived radon progeny. This paper reviews and evaluates published data from volunteer and laboratory animal experiments to estimate the HRTM absorption parameter values for short-lived radon progeny. Animal studies showed that lead ions have two phases of absorption: ∼10 % absorbed with a half-time of ∼15 min, the rest with a half-time of ∼10 h. The studies also indicated that some of the lead ions were bound to respiratory tract components. Bound fractions, f(b), for lead were estimated from volunteer and animal studies and ranged from 0.2 to 0.8. Based on the evaluations of published data, the following HRTM absorption parameter values were derived for lead as a decay product of radon: f(r) = 0.1, s(r) = 100 d(-1), s(s) = 1.7 d(-1), f(b) = 0.5 and s(b) = 1.7 d(-1). Effective doses calculated assuming these absorption parameter values instead of a single absorption half-time of 10 h with no binding (as has generally been assumed) are only a few per cent higher. However, as there is some conflicting evidence on the absorption kinetics for radon progeny, dose calculations have been carried out for different sets of absorption parameter values derived from different studies. The results of these calculations are discussed.

  20. Mobile phone types and SAR characteristics of the human brain

    NASA Astrophysics Data System (ADS)

    Lee, Ae-Kyoung; Hong, Seon-Eui; Kwon, Jong-Hwa; Choi, Hyung-Do; Cardis, Elisabeth

    2017-04-01

    Mobile phones differ in terms of their operating frequency, outer shape, and form and location of the antennae, all of which affect the spatial distributions of their electromagnetic field and the level of electromagnetic absorption in the human head or brain. For this paper, the specific absorption rate (SAR) was calculated for four anatomical head models at different ages using 11 numerical phone models of different shapes and antenna configurations. The 11 models represent phone types accounting for around 86% of the approximately 1400 commercial phone models released into the Korean market since 2002. Seven of the phone models selected have an internal dual-band antenna, and the remaining four possess an external antenna. Each model was intended to generate an average absorption level equivalent to that of the same type of commercial phone model operating at the maximum available output power. The 1 g peak spatial SAR and ipsilateral and contralateral brain-averaged SARs were reported for all 11 phone models. The effects of the phone type, phone position, operating frequency, and age of head models on the brain SAR were comprehensively determined.

  1. Mobile phone types and SAR characteristics of the human brain.

    PubMed

    Lee, Ae-Kyoung; Hong, Seon-Eui; Kwon, Jong-Hwa; Choi, Hyung-Do; Cardis, Elisabeth

    2017-04-07

    Mobile phones differ in terms of their operating frequency, outer shape, and form and location of the antennae, all of which affect the spatial distributions of their electromagnetic field and the level of electromagnetic absorption in the human head or brain. For this paper, the specific absorption rate (SAR) was calculated for four anatomical head models at different ages using 11 numerical phone models of different shapes and antenna configurations. The 11 models represent phone types accounting for around 86% of the approximately 1400 commercial phone models released into the Korean market since 2002. Seven of the phone models selected have an internal dual-band antenna, and the remaining four possess an external antenna. Each model was intended to generate an average absorption level equivalent to that of the same type of commercial phone model operating at the maximum available output power. The 1 g peak spatial SAR and ipsilateral and contralateral brain-averaged SARs were reported for all 11 phone models. The effects of the phone type, phone position, operating frequency, and age of head models on the brain SAR were comprehensively determined.

  2. Metamaterial-Embedded Low SAR PIFA for Cellular Phone.

    PubMed

    Faruque, M R I; Hossain, M I; Misran, N; Singh, M; Islam, M T

    2015-01-01

    A metamaterial-embedded planar inverted-F antenna (PIFA) is proposed in this study for cellular phone applications. A dual-band PIFA is designed to operate both GSM 900 MHz and DCS 1800 MHz. The ground plane of a conventional PIFA is modified using a planar one-dimensional metamaterial array. The investigation is performed using the Finite Integration Technique (FIT) of CST Microwave Studio. The performance of the developed antenna was measured in an anechoic chamber. The specific absorption rate (SAR) values are calculated considering two different holding positions: cheek and tilt. The SAR values are measured using COMOSAR measurement system. Good agreement is observed between the simulated and measured data. The results indicate that the proposed metamaterial-embedded antenna produces significantly lower SAR in the human head compared to the conventional PIFA. Moreover, the modified antenna substrate leads to slight improvement of the antenna performances.

  3. Metamaterial-Embedded Low SAR PIFA for Cellular Phone

    PubMed Central

    Faruque, M. R. I.; Hossain, M. I.; Misran, N.; Singh, M.; Islam, M. T.

    2015-01-01

    A metamaterial-embedded planar inverted-F antenna (PIFA) is proposed in this study for cellular phone applications. A dual-band PIFA is designed to operate both GSM 900 MHz and DCS 1800 MHz. The ground plane of a conventional PIFA is modified using a planar one-dimensional metamaterial array. The investigation is performed using the Finite Integration Technique (FIT) of CST Microwave Studio. The performance of the developed antenna was measured in an anechoic chamber. The specific absorption rate (SAR) values are calculated considering two different holding positions: cheek and tilt. The SAR values are measured using COMOSAR measurement system. Good agreement is observed between the simulated and measured data. The results indicate that the proposed metamaterial-embedded antenna produces significantly lower SAR in the human head compared to the conventional PIFA. Moreover, the modified antenna substrate leads to slight improvement of the antenna performances. PMID:26599584

  4. B1-based specific energy absorption rate determination for nonquadrature radiofrequency excitation.

    PubMed

    Katscher, Ulrich; Findeklee, Christian; Voigt, Tobias

    2012-12-01

    The current gold standard to estimate local and global specific energy absorption rate for MRI involves numerically modeling the patient and the transmit radiofrequency coil. Recently, a patient-individual method was presented, which estimated specific energy absorption rate from individually measured B(1) maps. This method, however, was restricted to quadrature volume coils due to difficulties distinguishing phase contributions from radiofrequency transmission and reception. In this study, a method separating these two phase contributions by comparing the electric conductivity reconstructed from different transmit channels of a parallel radiofrequency transmission system is presented. This enables specific energy absorption rate estimation not only for quadrature excitation but also for the nonquadrature excitation of the single elements of the transmit array. Though the contributions of the different phases are known, unknown magnetic field components and tissue boundary artifacts limit the technique. Nevertheless, the high agreement between simulated and experimental results found in this study is promising. B(1)-based specific energy absorption rate determination might become possible for arbitrary radiofrequency excitation on a patient-individual basis.

  5. Assessment of induced SAR in children exposed to electromagnetic plane waves between 10 MHz and 5.6 GHz.

    PubMed

    Bakker, J F; Paulides, M M; Christ, A; Kuster, N; van Rhoon, G C

    2010-06-07

    To avoid potentially adverse health effects of electromagnetic fields (EMF), the International Commission on Non-Ionizing Radiation Protection (ICNIRP) has defined EMF reference levels from the basic restrictions on the induced whole-body-averaged specific absorption rate (SAR(wb)) and the peak 10 g spatial-averaged SAR (SAR(10g)). The objective of this study is to assess if the SAR in children remains below the basic restrictions upon exposure at the reference levels. Finite difference time domain (FDTD) modeling was used to calculate the SAR in six children and two adults when exposed to all 12 orthogonal plane wave configurations. A sensitivity study showed an expanded uncertainty of 53% (SAR(wb)) and 58% (SAR(10g)) due to variations in simulation settings and tissue properties. In this study, we found that the basic restriction on the SAR(wb) is occasionally exceeded for children, up to a maximum of 45% in small children. The maximum SAR(10g) values, usually found at body protrusions, remain under the limit for all scenarios studied. Our results are in good agreement with the literature, suggesting that the recommended ICNIRP reference levels may need fine tuning.

  6. Mechanism and rate of glucose absorption differ between an Australian honeyeater (Meliphagidae) and a lorikeet (Loriidae).

    PubMed

    Napier, Kathryn R; McWhorter, Todd J; Fleming, Patricia A

    2008-11-01

    Efficient mechanisms of glucose absorption are necessary for volant animals as a means of reducing mass during flight: they speed up gut transit time and require smaller volume and mass of gut tissue. One mechanism that may be important is absorption via paracellular (non-mediated) pathways. This may be particularly true for nectarivorous species which encounter large quantities of sugar in their natural diet. We investigated the extent of mediated and non-mediated glucose absorption in red wattlebirds Anthochaera carunculata (Meliphagidae) and rainbow lorikeets Trichoglossus haematodus (Loriidae) to test the hypothesis that paracellular uptake accounts for a significant proportion of total glucose uptake in these species. We found that routes of glucose absorption are highly dynamic in both species. In lorikeets, absorption of L-glucose (non-mediated uptake) is slower than that of D-glucose (mediated and non-mediated uptake), with as little as 10% of total glucose absorbed by the paracellular pathway initially (contrasting previous indirect estimates of approximately 80%). Over time, however, more glucose may be absorbed via the paracellular route. Glucose absorption by both mediated and non-mediated mechanisms in wattlebirds occurred at a faster rate than in lorikeets, and wattlebirds also rely substantially on paracellular uptake. In wattlebirds, we recorded higher bioavailability of L-glucose (96+/-3%) compared with D-glucose (57+/-2%), suggesting problems with the in vivo use of radiolabeled d-glucose. Further trials with 3-O-methyl-D-glucose revealed high bioavailability in wattlebirds (90+/-5%). This non-metabolisable glucose analogue remains the probe of choice for measuring uptake rates in vivo, especially in birds in which absorption and metabolism occur extremely rapidly.

  7. Updated Long Term Fault Slip Rates and Seismic Hazard in the Central Alborz, Iran: New Constraints From InSAR and GPS

    NASA Astrophysics Data System (ADS)

    Weston, J. M.; Shirzaei, M.

    2015-12-01

    The Alborz mountain range, located south of the Caspian Sea, accommodates 30% of the 25 mm/yr convergence between Arabia and Eurasia. The resulting shortening and left lateral motion is distributed over several active fault zones within the Central Alborz. Despite earlier efforts using only GPS data, little is known about the long term rate of vertical deformation and aseismic slip. Several historical earthquakes have affected this region, some of the largest of these events occurred on the Mosha fault which is close to the capital city, Tehran, which has a population of over eight million. Thus, constraining the interseismic slip rates in this region is particularly important. In this study we complement existing horizontal velocities from a regional GPS network, with line of sight velocities from interferometric synthetic aperture radar (InSAR), to provide additional constraints on the vertical deformation and enhance the spatial coverage. Assuming a seismogenic depth of 30 km, based on microseismicity data, we solve for the geometry and long term slip rates on four major fault strands in this region. We obtain a long term slip rate of ~ 3 mm/yr for the Mosha and North Alborz faults, and ~ 10 mm/yr for the Khazar fault and Parchin faults. These rates and fault geometries are in agreement with earlier works, and fit the GPS data well. However, close to the fault traces there are large residuals in the InSAR data, suggesting that there is shallow creep (< 30 km). Therefore, we carry out a subsequent inversion using only the residual InSAR displacements to solve for the distribution of creep within the seismogenic zones on these faults. We find that the Mosha and North Alborz faults remain locked between 0 - 30 km depth, whilst the Parchin and Khazar faults are creeping. This new observation of fault creep has direct implications for the seismic hazard in the region. On the Mosha fault we estimate a slip deficit equivalent to a Mw 7.0 event. The combination of InSAR

  8. CRUCIAL: Cryosat-2 Success over Inland Water and Land: SAR and SARin Full Bit Rate Altimetric Heights and Validation

    NASA Astrophysics Data System (ADS)

    Moore, Philip; Birkinshaw, Stephen; Restano, Marco; Ambrozio, Americo; Benveniste, Jerome

    2016-04-01

    CRUCIAL is an ESA/STSE funded project investigating innovative land and inland water applications from Cryosat-2 with a forward-look component to the future Sentinel-3 and Jason-CS/Sentinel-6 missions. The high along-track sampling and resolution of Cryosat-2 altimeter in SAR and SARin modes offer the opportunity to recover high frequency signals over inland waters. This paper will present the theoretical approach to analysis of the FBR L1A Doppler beams to form a product using ground cell gridding, beam steering and beam stacking from which inland water heights are derivable from the retracked Cryosat-2 altimetric waveforms. Details of the processing strategy will include a comparison of waveforms and heights from the burst echoes (~80 m along-track) and from multi-look waveforms (~320 m along-track). SAR and SARin FBR data are available for the Amazon, Brahmaputra and Mekong. The Mekong and Amazon FBR SAR data has been processed for 2011-2015 and results will be compared against stage data from the nearest gauge. Similarly, heights from Tonle Sap will be compared against Jason-2 data from the United States Department of Agriculture web site. A strategy to select the number of multi-looks over rivers will also be presented. Results of FBR SARin processing will be presented including comparison of heights from the two antennae and the extraction of slope of the ground surface.

  9. Effects of Receive-Only Inserts on SAR, B1+ Field and Tx Coil Performance

    PubMed Central

    Krishnamurthy, Narayanan; Zhao, Tiejun; Ibrahim, Tamer S

    2013-01-01

    Purpose To evaluate the effect of different cylindrical and close conforming receive only array designs on spin excitation and specific absorption rate (SAR) of a 7 Tesla transmit only head coil. Materials and Methods We developed FDTD models of different receive only array geometries. Cylindrical and close fitting helmet arrays with varying copper trace widths; a TEM Tx coil model and two head models were used in numerical simulations. Tx coil coupling was experimentally measured and validated with FDTD modeling. Results Changing copper trace width of loops in array models caused subtle changes in RF absorption (<5%). Changes in SAR distribution were observed in the head models with Rx-only inserts. Peak SAR increased (−1 to +15%) in different tissues for a mean B1+ in the brain of 2 μT. Total absorption in the head models for 1 Watt forward power increased (5 to 21%) in the heads with Rx-only inserts. Changes in RF absorption with different Rx-inserts indicate a change in RF radiation of the Tx coil even when changes in B1+ and coupling between ports of Tx coil were minimal. Conclusion Changes in local/global SAR and subtle changes in B1+ field distributions were observed with the presence of Rx-only inserts. Thus, incorporation of the receive-only array effects are needed when evaluating SAR and designing RF transmit pulse waveform parameters for shimming and/or Tx-SENSE for 7 T MRI. PMID:23913474

  10. Spatial and temporal variations in creep rate along the El Pilar fault at the Caribbean-South American plate boundary (Venezuela), from InSAR

    NASA Astrophysics Data System (ADS)

    Pousse Beltran, Léa.; Pathier, Erwan; Jouanne, François; Vassallo, Riccardo; Reinoza, Carlos; Audemard, Franck; Doin, Marie Pierre; Volat, Matthieu

    2016-11-01

    In eastern Venezuela, the Caribbean-South American plate boundary follows the El Pilar fault system. Previous studies based on three GPS campaigns (2003-2005-2013) demonstrated that the El Pilar fault accommodates the whole relative displacement between the two tectonic plates (20 mm/yr) and proposed that 50-60% of the slip is aseismic. In order to quantify the possible variations of the aseismic creep in time and space, we conducted an interferometric synthetic aperture radar (InSAR) time series analysis, using the (NSBAS) New Small BAseline Subset method, on 18 images from the Advanced Land Observing Satellite (ALOS-1) satellite spanning the 2007-2011 period. During this 3.5 year period, InSAR observations show that aseismic slip decreases eastward along the fault: the creep rate of the western segment reaches 25.3 ± 9.4 mm/yr on average, compared to 13.4 ± 6.9 mm/yr on average for the eastern segment. This is interpreted, through slip distribution models, as being related to coupled and uncoupled areas between the surface and 20 km in depth. InSAR observations also show significant temporal creep rate variations (accelerations) during the considered time span along the western segment. The transient behavior of the creep is not consistent with typical postseismic afterslip following the 1997 Ms 6.8 earthquake. The creep is thus interpreted as persistent aseismic slip during an interseismic period, which has a pulse- or transient-like behavior.

  11. Analytic SAR computation in a multilayer elliptic cylinder for bioelectromagnetic applications.

    PubMed

    Caorsi, S; Pastorino, M; Raffetto, M

    1999-09-01

    The specific absorption rate (SAR) is usually considered as the basic quantity to derive the reference levels for the exposure of workers and general population. In this paper, we propose an analytical procedure for the SAR computation inside a biological elliptic cylinder model made up of layers of different biological tissues. The procedure makes it possible to obtain accurate SAR values in simplified models of biological subsystems, and it is also helpful to test numerical techniques to be used for more realistic models and to generate synthetic input data for diagnostic methodologies. For the assumed model, the calculation of the analytical solution has been obtained by generalizing a known procedure that deals only with lossless materials, and the model makes possible the calculation of the SAR for realistic human tissues. Various calculations prove the reliability of the technique.

  12. SAR Computation inside Fetus by RF Coil during MR Imaging Employing Realistic Numerical Pregnant Woman Model

    NASA Astrophysics Data System (ADS)

    Kikuchi, Satoru; Saito, Kazuyuki; Takahashi, Masaharu; Ito, Koichi; Ikehira, Hiroo

    This paper presents the computational electromagnetic dosimetry inside an anatomically based pregnant woman models exposed to electromagnetic wave during magnetic resonance imaging. The two types of pregnant woman models corresponding to early gestation and 26 weeks gestation were used for this study. The specific absorption rate (SAR) in and around a fetus were calculated by radiated electromagnetic wave from highpass and lowpass birdcage coil. Numerical calculation results showed that high SAR region is observed at the body in the vicinity of gaps of the coil, and is related to concentrated electric field in the gaps of human body such as armpit and thigh. Moreover, it has confirmed that the SAR in the fetus is less than International Electrotechnical Commission limit of 10W/kg, when whole-body average SARs are 2W/kg and 4W/kg, which are the normal operating mode and first level controlled operating mode, respectively.

  13. Specific absorption rate analysis of broadband mobile antenna with negative index metamaterial

    NASA Astrophysics Data System (ADS)

    Alam, Touhidul; Faruque, Mohammad Rashed Iqbal; Islam, Mohammad Tariqul

    2016-03-01

    This paper presents a negative index metamaterial-inspired printed mobile wireless antenna that can support most mobile applications such as GSM, UMTS, Bluetooth and WLAN frequency bands. The antenna consists of a semi-circular patch, a 50Ω microstrip feed line and metamaterial ground plane. The antenna occupies a very small space of 37 × 47 × 0.508 mm3, making it suitable for mobile wireless application. The perceptible novelty shown in this proposed antenna is that reduction of specific absorption rate using the negative index metamaterial ground plane. The proposed antenna reduced 72.11 and 75.53 % of specific absorption rate at 1.8 and 2.4 GHz, respectively.

  14. Specific absorption rate determination of magnetic nanoparticles through hyperthermia measurements in non-adiabatic conditions

    NASA Astrophysics Data System (ADS)

    Coïsson, M.; Barrera, G.; Celegato, F.; Martino, L.; Vinai, F.; Martino, P.; Ferraro, G.; Tiberto, P.

    2016-10-01

    An experimental setup for magnetic hyperthermia operating in non-adiabatic conditions is described. A thermodynamic model that takes into account the heat exchanged by the sample with the surrounding environment is developed. A suitable calibration procedure is proposed that allows the experimental validation of the model. Specific absorption rate can then be accurately determined just from the measurement of the sample temperature at the equilibrium steady state. The setup and the measurement procedure represent a simplification with respect to other systems requiring calorimeters or crucial corrections for heat flow. Two families of magnetic nanoparticles, one superparamagnetic and one characterised by larger sizes and static hysteresis, have been characterised as a function of field intensity, and specific absorption rate and intrinsic loss power have been obtained.

  15. Local SAR, Global SAR, and Power-Constrained Large-Flip-Angle Pulses with Optimal Control and Virtual Observation Points

    PubMed Central

    Vinding, Mads S.; Guérin, Bastien; Vosegaard, Thomas; Nielsen, Niels Chr.

    2016-01-01

    Purpose To present a constrained optimal-control (OC) framework for designing large-flip-angle parallel-transmit (pTx) pulses satisfying hardware peak-power as well as regulatory local and global specific-absorption-rate (SAR) limits. The application is 2D and 3D spatial-selective 90° and 180° pulses. Theory and Methods The OC gradient-ascent-pulse-engineering method with exact gradients and the limited-memory Broyden-Fletcher-Goldfarb-Shanno method is proposed. Local SAR is constrained by the virtual-observation-points method. Two numerical models facilitated the optimizations, a torso at 3 T and a head at 7 T, both in eight-channel pTx coils and acceleration-factors up to 4. Results The proposed approach yielded excellent flip-angle distributions. Enforcing the local-SAR constraint, as opposed to peak power alone, reduced the local SAR 7 and 5-fold with the 2D torso excitation and inversion pulse, respectively. The root-mean-square errors of the magnetization profiles increased less than 5% with the acceleration factor of 4. Conclusion A local and global SAR, and peak-power constrained OC large-flip-angle pTx pulse design was presented, and numerically validated for 2D and 3D spatial-selective 90° and 180° pulses at 3 T and 7 T. PMID:26715084

  16. Evaluation of Specific Absorption Rate as a Dosimetric Quantity for Electromagnetic Fields Bioeffects

    PubMed Central

    Panagopoulos, Dimitris J.; Johansson, Olle; Carlo, George L.

    2013-01-01

    Purpose To evaluate SAR as a dosimetric quantity for EMF bioeffects, and identify ways for increasing the precision in EMF dosimetry and bioactivity assessment. Methods We discuss the interaction of man-made electromagnetic waves with biological matter and calculate the energy transferred to a single free ion within a cell. We analyze the physics and biology of SAR and evaluate the methods of its estimation. We discuss the experimentally observed non-linearity between electromagnetic exposure and biological effect. Results We find that: a) The energy absorbed by living matter during exposure to environmentally accounted EMFs is normally well below the thermal level. b) All existing methods for SAR estimation, especially those based upon tissue conductivity and internal electric field, have serious deficiencies. c) The only method to estimate SAR without large error is by measuring temperature increases within biological tissue, which normally are negligible for environmental EMF intensities, and thus cannot be measured. Conclusions SAR actually refers to thermal effects, while the vast majority of the recorded biological effects from man-made non-ionizing environmental radiation are non-thermal. Even if SAR could be accurately estimated for a whole tissue, organ, or body, the biological/health effect is determined by tiny amounts of energy/power absorbed by specific biomolecules, which cannot be calculated. Moreover, it depends upon field parameters not taken into account in SAR calculation. Thus, SAR should not be used as the primary dosimetric quantity, but used only as a complementary measure, always reporting the estimating method and the corresponding error. Radiation/field intensity along with additional physical parameters (such as frequency, modulation etc) which can be directly and in any case more accurately measured on the surface of biological tissues, should constitute the primary measure for EMF exposures, in spite of similar uncertainty to predict

  17. CASCADE CALCULATION OF EXOTIC HELIUM ATOMS -- s-orbit vs. p-orbit absorption rates

    NASA Astrophysics Data System (ADS)

    Koike, T.; Akaishi, Y.

    2000-09-01

    We construct a new model for the Stark-mixing process of exotic helium atoms using the impact-parameter method, and compared it with a phenomenological one used so far (sliding transition model). It turns out that the sliding transition model is justified only for low-n states and largely overestimates the Stark-mixing transition rate at high-n states. As a result of the atomic-cascade calculation, the s-(p-)orbit absorption rates in our new model are considerably smaller (larger) than those in the phenomenological one, although both our new model and old one well reproduce the experimental x-ray yields.

  18. Thermal effects of high-field (1.5 tesla) magnetic resonance imaging of the spine. Clinical experience above a specific absorption rate of 0.4 W/kg.

    PubMed

    Shellock, F G; Schaefer, D J; Grundfest, W; Crues, J V

    1986-01-01

    Current safety guidelines recommend limiting the exposure to radiofrequency (RF) radiation used for clinical magnetic resonance imaging to a whole body average specific absorption rate (SAR) of 0.4 W/kg. Since it may be desirable to image with SARs that exceed this level during MRI of the spine, we evaluated the thermal responses associated with these procedures. Body and skin temperatures were determined in 25 patients immediately before and after MRI. Since the eye is particularly susceptible to thermal injury, corneal temperature was also measured. High-resolution thermography was performed on three subjects to evaluate the surface heating pattern and identify potential thermal 'hot spots'. A 1.5 tesla/64 MHz MRI system with quadrature transmission and reception was used iN this study. The whole body average specific absorption rate ranged from 0.5 to 1.3 W/kg. Ambient conditions were room temperature 20-24 degrees C and relative humidity between 40 and 50 per cent. There was a slight but statistically significant (p less than 0.01) increase in body temperature after MRI (36.5 +/- 0.4 to 36.7 +/- 0.4 degrees C). Temperatures of the hand (30.4 +/- 1.4 to 31.2 +/- 1.0 degrees C), positioning isocenter (32.1 +/- 0.6 to 32.9 +/- 0.5), and cornea (32.5 +/- 0.6 to 32.9 +/- 0.5 degrees C) also increased a statistically significant amount. Thermographic imaging revealed normal heating patterns with no surface 'hot spots'. We conclude that the temperature changes associated with MRI of the spine at the SARs we studied were well below known thresholds for adverse effects and do not appear to be harmful to patients.

  19. Two-spoke placement optimization under explicit specific absorption rate and power constraints in parallel transmission at ultra-high field

    NASA Astrophysics Data System (ADS)

    Dupas, Laura; Massire, Aurélien; Amadon, Alexis; Vignaud, Alexandre; Boulant, Nicolas

    2015-06-01

    The spokes method combined with parallel transmission is a promising technique to mitigate the B1+ inhomogeneity at ultra-high field in 2D imaging. To date however, the spokes placement optimization combined with the magnitude least squares pulse design has never been done in direct conjunction with the explicit Specific Absorption Rate (SAR) and hardware constraints. In this work, the joint optimization of 2-spoke trajectories and RF subpulse weights is performed under these constraints explicitly and in the small tip angle regime. The problem is first considerably simplified by making the observation that only the vector between the 2 spokes is relevant in the magnitude least squares cost-function, thereby reducing the size of the parameter space and allowing a more exhaustive search. The algorithm starts from a set of initial k-space candidates and performs in parallel for all of them optimizations of the RF subpulse weights and the k-space locations simultaneously, under explicit SAR and power constraints, using an active-set algorithm. The dimensionality of the spoke placement parameter space being low, the RF pulse performance is computed for every location in k-space to study the robustness of the proposed approach with respect to initialization, by looking at the probability to converge towards a possible global minimum. Moreover, the optimization of the spoke placement is repeated with an increased pulse bandwidth in order to investigate the impact of the constraints on the result. Bloch simulations and in vivo T2∗-weighted images acquired at 7 T validate the approach. The algorithm returns simulated normalized root mean square errors systematically smaller than 5% in 10 s.

  20. Influence of light absorption rate by Nannochloropsis oculata on triglyceride production during nitrogen starvation.

    PubMed

    Kandilian, Razmig; Pruvost, Jérémy; Legrand, Jack; Pilon, Laurent

    2014-07-01

    This study aims to understand the role of light transfer in triglyceride fatty-acid (TG-FA) cell content and productivity from microalgae during nitrogen starvation. Large amounts of TG-FA can be produced via nitrogen starvation of microalgae in photobioreactors exposed to intense light. First, spectral absorption and scattering cross-sections of N. oculata were measured at different times during nitrogen starvation. They were used to relate the mean volumetric rate of energy absorption (MVREA) per unit mass of microalgae to the TG-FA productivity and cell content. TG-FA productivity correlated with the MVREA and reached a maximum for MVREA of 13 μmol hν/gs. This indicated that TG-FA synthesis was limited by the photon absorption rate in the PBR. A minimum MVREA of 13 μmol hν/gs was also necessary at the onset of nitrogen starvation to trigger large accumulation of TG-FA in cells. These results will be instrumental in defining protocols for TG-FA production in scaled-up photobioreactors.

  1. Effective absorption cross sections and photolysis rates of anthropogenic and biogenic secondary organic aerosols

    NASA Astrophysics Data System (ADS)

    Romonosky, Dian E.; Ali, Nujhat N.; Saiduddin, Mariyah N.; Wu, Michael; Lee, Hyun Ji (Julie); Aiona, Paige K.; Nizkorodov, Sergey A.

    2016-04-01

    Mass absorption coefficient (MAC) values were measured for secondary organic aerosol (SOA) samples produced by flow tube ozonolysis and smog chamber photooxidation of a wide range of volatile organic compounds (VOC), specifically: α-pinene, β-pinene, β-myrcene, d-limonene, farnesene, guaiacol, imidazole, isoprene, linalool, ocimene, p-xylene, 1-methylpyrrole, and 2-methylpyrrole. Both low-NOx and high-NOx conditions were employed during the chamber photooxidation experiments. MAC values were converted into effective molecular absorption cross sections assuming an average molecular weight of 300 g/mol for SOA compounds. The upper limits for the effective photolysis rates of SOA compounds were calculated by assuming unity photolysis quantum yields and convoluting the absorption cross sections with a time-dependent solar spectral flux. A more realistic estimate for the photolysis rates relying on the quantum yield of acetone was also obtained. The results show that condensed-phase photolysis of SOA compounds can potentially occur with effective lifetimes ranging from minutes to days, suggesting that photolysis is an efficient and largely overlooked mechanism of SOA aging.

  2. Sensitivity of the atmospheric lapse rate to solar cloud absorption in a radiative-convective model

    NASA Astrophysics Data System (ADS)

    Erlick, Carynelisa; Ramaswamy, V.

    2003-08-01

    Previous radiative-convective model studies of the radiative forcing due to absorbing aerosols such as soot and dust have revealed a strong dependence on the vertical distribution of the absorbers. In this study, we extend this concept to absorption in cloud layers, using a one-dimensional radiative-convective model employing high, middle, and low cloud representations to investigate the response of the surface temperature and atmospheric lapse rate to increases in visible cloud absorption. The visible single-scattering albedo (ssa) of the clouds is prescribed, ranging from 1.0 to 0.6, where 0.99 is the minimum that would be expected from the presence of absorbing aerosols within the cloud drops on the basis of recent Monterey Area Ship Track (MAST) Experiment case studies. Simulations are performed with respect to both a constant cloud optical depth and an increasing cloud optical depth and as a function of cloud height. We find that increases in solar cloud absorption tend to warm the troposphere and surface and stabilize the atmosphere, while increases in cloud optical depth cool the troposphere and surface and slightly stabilize the atmosphere between the low cloud top and surface because of the increase in surface cooling. In the absence of considerations involving microphysical or cloud-climate feedbacks, we find that two conditions are required to yield an inversion from a solar cloud absorption perturbation: (1) The solar absorption perturbation must be included throughout the tropospheric clouds column, distributing the solar heating to higher altitudes, and (2) the ssa of the clouds must be ≤0.6, which is an unrealistically low value. The implication is that there is very little possibility of significant stabilization of the global mean atmosphere due to perturbation of cloud properties given current ssa values.

  3. New constraints in absorptive capacity and the optimum rate of petroleum output

    SciTech Connect

    El Mallakh, R

    1980-01-01

    Economic policy in four oil-producing countries is analyzed within a framework that combines a qualitative assessment of the policy-making process with an empirical formulation based on historical and current trends in these countries. The concept of absorptive capacity is used to analyze the optimum rates of petroleum production in Iran, Iraq, Saudi Arabia, and Kuwait. A control solution with an econometric model is developed which is then modified for alternative development strategies based on analysis of factors influencing production decisions. The study shows the consistencies and inconsistencies between the goals of economic growth, oil production, and exports, and the constraints on economic development. Simulation experiments incorporated a number of the constraints on absorptive capacity. Impact of other constraints such as income distribution and political stability is considered qualitatively. (DLC)

  4. Specific absorption rate calculations of magnetite, using a modified linear response model for applications in magnetic hyperthermia

    SciTech Connect

    Hernández S, A. E-mail: meduardo2001@hotmail.com; Cano, M. E. E-mail: meduardo2001@hotmail.com; Torres-Arenas, J.

    2014-11-07

    Currently the absorption of electromagnetic radiation by magnetic nanoparticles is studied for biomedical applications of cancer thermotherapy. Several experiments are conduced following the framework of the Rosensweig model, in order to estimate their specific absorption rate. Nevertheless, this linear approximation involves strong simplifications which constrain their accuracy and validity range. The main aim of this work is to incorporate the deviation of the sphericity assumption in particles shapes, to improve the determination of their specific absorption rate. The correction to the effective particles volume is computed as a measure of the apparent amount of magnetic material, interacting with the external AC magnetic field. Preliminary results using the physical properties of Fe3O4 nanoparticles, exhibit an important correction in their estimated specific absorption rate, as a function of the apparent mean particles radius. Indeed, we have observed using a small deviation (6% of the apparent radius), up to 40% of the predicted specific absorption rate by the Rosensweig linear approximation.

  5. ERS-1 SAR data processing

    NASA Technical Reports Server (NTRS)

    Leung, K.; Bicknell, T.; Vines, K.

    1986-01-01

    To take full advantage of the synthetic aperature radar (SAR) to be flown on board the European Space Agency's Remote Sensing Satellite (ERS-1) (1989) and the Canadian Radarsat (1990), the implementation of a receiving station in Alaska is being studied to gather and process SAR data pertaining in particular to regions within the station's range of reception. The current SAR data processing requirement is estimated to be on the order of 5 minutes per day. The Interim Digital Sar Processor (IDP) which was under continual development through Seasat (1978) and SIR-B (1984) can process slightly more than 2 minutes of ERS-1 data per day. On the other hand, the Advanced Digital SAR Processore (ADSP), currently under development for the Shuttle Imaging Radar C (SIR-C, 1988) and the Venus Radar Mapper, (VMR, 1988), is capable of processing ERS-1 SAR data at a real time rate. To better suit the anticipated ERS-1 SAR data processing requirement, both a modified IDP and an ADSP derivative are being examined. For the modified IDP, a pipelined architecture is proposed for the mini-computer plus array processor arrangement to improve throughout. For the ADSP derivative, a simplified version is proposed to enhance ease of implementation and maintainability while maintaing real time throughput rates. These processing systems are discussed and evaluated.

  6. INTERSTELLAR METASTABLE HELIUM ABSORPTION AS A PROBE OF THE COSMIC-RAY IONIZATION RATE

    SciTech Connect

    Indriolo, Nick; McCall, Benjamin J.; Hobbs, L. M.; Hinkle, K. H.

    2009-10-01

    The ionization rate of interstellar material by cosmic rays has been a major source of controversy, with different estimates varying by three orders of magnitude. Observational constraints of this rate have all depended on analyzing the chemistry of various molecules that are produced following cosmic-ray ionization, and in many cases these analyses contain significant uncertainties. Even in the simplest case (H{sup +} {sub 3}), the derived ionization rate depends on an (uncertain) estimate of the absorption path length. In this paper, we examine the feasibility of inferring the cosmic-ray ionization rate using the 10830 A absorption line of metastable helium. Observations through the diffuse clouds toward HD 183143 are presented, but yield only an upper limit on the metastable helium column density. A thorough investigation of He{sup +} chemistry reveals that only a small fraction of He{sup +} will recombine into the triplet state and populate the metastable level. In addition, excitation to the triplet manifold of helium by secondary electrons must be accounted for as it is the dominant mechanism which produces He* in some environments. Incorporating these various formation and destruction pathways, we derive new equations for the steady state abundance of metastable helium. Using these equations in concert with our observations, we find zeta{sub He} < 1.2 x 10{sup -15} s{sup -1}, an upper limit about 5 times larger than the ionization rate previously inferred for this sight line using H{sup +} {sub 3}. While observations of interstellar He* are extremely difficult at present, and the background chemistry is not nearly as simple as previously thought, potential future observations of metastable helium would provide an independent check on the cosmic-ray ionization rate derived from H{sup +} {sub 3} in diffuse molecular clouds, and, perhaps more importantly, allow the first direct measurements of the ionization rate in diffuse atomic clouds.

  7. Analysis of the local worst-case SAR exposure caused by an MRI multi-transmit body coil in anatomical models of the human body.

    PubMed

    Neufeld, Esra; Gosselin, Marie-Christine; Murbach, Manuel; Christ, Andreas; Cabot, Eugenia; Kuster, Niels

    2011-08-07

    Multi-transmit coils are increasingly being employed in high-field magnetic resonance imaging, along with a growing interest in multi-transmit body coils. However, they can lead to an increase in whole-body and local specific absorption rate (SAR) compared to conventional body coils excited in circular polarization for the same total incident input power. In this study, the maximum increase of SAR for three significantly different human anatomies is investigated for a large 3 T (128 MHz) multi-transmit body coil using numerical simulations and a (generalized) eigenvalue-based approach. The results demonstrate that the increase of SAR strongly depends on the anatomy. For the three models and normalization to the sum of the rung currents squared, the whole-body averaged SAR increases by up to a factor of 1.6 compared to conventional excitation and the peak spatial SAR (averaged over any 10 cm(3) of tissue) by up to 13.4. For some locations the local averaged SAR goes up as much as 800 times (130 when looking only at regions where it is above 1% of the peak spatial SAR). The ratio of the peak spatial SAR to the whole-body SAR increases by a factor of up to 47 and can reach values above 800. Due to the potentially much larger power deposition, additional, preferably patient-specific, considerations are necessary to avoid injuries by such systems.

  8. The absorption efficiency and respiration rate of the Florida lancelet, Branchiostoma floridae.

    PubMed

    Nash, Troy R; Ruppert, Edward E; Colacino, James M

    2009-12-01

    The present study investigates some aspects of the digestive biology and physiological energetics of the Florida lancelet, Branchiostoma floridae. Florida lancelets are able to remove 47.2-56.9% of the energy from a diet of mixed algae. The respiration rate is 0.100mL O(2) (STPD) h(-1) g(-1) (wet), which estimates a metabolic rate of 0.248 J h(-1), at an average body mass of 0.125 g (wet). Published values of the chlorophyll a concentration in its natural habitat indicate that a 125 mg lancelet would need to filter 0.018-0.031 L h(-1) to remove sufficient food to support its resting metabolism. The filtration rate of lancelets has been reported as 0.138 L h(-1), indicating that the actual filtration rate is 4-7 times greater than the filtration rate needed to meet resting metabolic demands. It appears that lancelets have the potential to be raised in aquaculture, because their absorption efficiency and respiration rate are comparable to suspension-feeding invertebrates that have been successfully aquacultured.

  9. Greater apparent absorption of flavonoids is associated with lesser human fecal flavonoid disappearance rates.

    PubMed

    Simons, Andrean L; Renouf, Mathieu; Murphy, Patricia A; Hendrich, Suzanne

    2010-01-13

    It was hypothesized that 5,7,4'-OH-flavonoids disappeared more rapidly from human fecal incubations and were less absorbable by humans than flavonoids without 5-OH moieties. Anaerobic fecal disappearance rates over 24 h were determined for 15 flavonoids in samples from 20 men and 13 women. In these anaerobic fecal mixtures, flavonoids with 5,7,4'-OH groups, genistein, apigenin, naringenin, luteolin, kaempferol, and quercetin (disappearance rate, k=0.46+/-0.10 h(-1)), and methoxylated flavonoids, hesperetin and glycitein (k=0.24+/-0.21 h(-1)), disappeared rapidly compared with flavonoids lacking 5-OH (e.g., daidzein, k=0.07+/-0.03 h(-1)). Apparent absorption of flavonoids that disappeared rapidly from in vitro fecal incubations, genistein, naringenin, quercetin, and hesperetin, was compared with that of daidzein, a slowly disappearing flavonoid, in 5 men and 5 women. Subjects ingested 104 micromol of genistein and 62 micromol of daidzein (soy milk), 1549 micromol of naringenin and 26 micromol of hesperetin (grapefruit juice), and 381 micromol of quercetin (onions) in three test meals, each separated by 1 week. Blood and urine samples were collected over 24 h after each test meal. Plasma flavonoid concentrations ranged from 0.01 to 1 microM. The apparent absorption, expressed as percentage of ingested dose excreted in urine, was significantly less for naringenin (3.2+/-1.7%), genistein (7.2+/-4.6%), hesperetin (7.3+/-3.2%), and quercetin (5.6+/-3.7%) compared with daidzein (43.4+/-15.5%, p=0.02). These data affirmed the hypothesis that the 5,7,4'-OH of flavonoids limited apparent absorption of these compounds in humans.

  10. Gas-phase rate coefficients for reactions of NO 3, OH, O 3 and O( 3P) with unsaturated alcohols and ethers: Correlations and structure-activity relations (SARs)

    NASA Astrophysics Data System (ADS)

    Pfrang, Christian; King, Martin D.; Braeckevelt, Mareike; Canosa-Mas, Carlos E.; Wayne, Richard P.

    Experimental difficulties sometimes force modellers to use predicted rate coefficients for reactions of oxygenated volatile organic compounds (oVOCs). We examine here methods for making the predictions for reactions of atmospheric initiators of oxidation, NO 3, OH, O 3 and O( 3P), with unsaturated alcohols and ethers. Logarithmic correlations are found between measured rate coefficients and calculated orbital energies, and these correlations may be used directly to estimate rate coefficients for compounds where measurements have not been performed. To provide a shortcut that obviates the need to calculate orbital energies, structure-activity relations (SARs) are developed. Our SARs are tested for predictive power against compounds for which experimental rate coefficients exist, and their accuracy is discussed. Estimated atmospheric lifetimes for oVOCs are presented. The SARs for alkenols successfully predict key rate coefficients, and thus can be used to enhance the scope of atmospheric models incorporating detailed chemistry. SARs for the ethers have more limited applicability, but can still be useful in improving tropospheric models.

  11. Elementary reaction rate measurements at high temperatures by tunable-laser flash-absorption

    SciTech Connect

    Hessler, J.P.

    1993-12-01

    The major objective of this program is to measure thermal rate coefficients and branching ratios of elementary reactions. To perform these measurements, the authors constructed an ultrahigh-purity shock tube to generate temperatures between 1000 and 5500 K. The tunable-laser flash-absorption technique is used to measure the rate of change of the concentration of species which absorb below 50,000 cm{sup {minus}1} e.g.: OH, CH, and CH{sub 3}. This technique is being extended into the vacuum-ultraviolet spectral region where one can measure atomic species e.g.: H, D, C, O, and N; and diatomic species e.g.: O{sub 2}, CO, and OH.

  12. Prostaglandin E2 regulation of amnion cell vascular endothelial growth factor expression: relationship with intramembranous absorption rate in fetal sheep.

    PubMed

    Cheung, Cecilia Y; Beardall, Michael K; Anderson, Debra F; Brace, Robert A

    2014-08-01

    We hypothesized that prostaglandin E2 (PGE2) stimulates amniotic fluid transport across the amnion by upregulating vascular endothelial growth factor (VEGF) expression in amnion cells and that amniotic PGE2 concentration correlates positively with intramembranous (IM) absorption rate in fetal sheep. The effects of PGE2 at a range of concentrations on VEGF 164 and caveolin-1 gene expressions were analyzed in cultured ovine amnion cells. IM absorption rate, amniotic fluid (AF) volume, and PGE2 concentration in AF were determined in late-gestation fetal sheep during control conditions, isovolumic fetal urine replacement (low IM absorption rate), or intra-amniotic fluid infusion (high IM absorption rate). In ovine amnion cells, PGE2 induced dose- and time-dependent increases in VEGF 164 mRNA levels and reduced caveolin-1 mRNA and protein levels. VEGF receptor blockade abolished the caveolin-1 response, while minimally affecting the VEGF response to PGE2. In sheep fetuses, urine replacement reduced amniotic PGE2 concentration by 58%, decreased IM absorption rate by half, and doubled AF volume (P < 0.01). Intra-amniotic fluid infusion increased IM absorption rate and AF volume (P < 0.01), while amniotic PGE2 concentration was unchanged. Neither IM absorption rate nor AF volume correlated with amniotic PGE2 concentration under each experimental condition. Although PGE2 at micromolar concentrations induced dose-dependent responses in VEGF and caveolin-1 gene expression in cultured amnion cells consistent with a role of PGE2 in activating VEGF to mediate AF transport across the amnion, amniotic PGE2 at physiological nanomolar concentrations does not appear to regulate IM absorption rate or AF volume.

  13. C (max) and t (max) verification using Fibonacci sequence and absorption rate.

    PubMed

    Grabowski, Tomasz; Jaroszewski, Jerzy J; Borucka, Beata; Ziółkowski, Hubert

    2013-06-01

    The aim of this study was to verify the values of maximal observed concentration (C max,obs) and the time, at which maximum concentration is observed (t max,obs) using the analysis of the absorption rate constant (k ab). It focused on the changes in concentration over time (C-T) for drugs, for which several peaks of concentration occur. In addition, the attempt was made to use Fibonacci sequence to facilitate the visual analysis of the dynamics in changes of concentration on C-T graphs. The analyses were conducted with the use of three hypothetical data groups (groups I, II and III), which had distinct C-T profiles, and with the in vivo data form healthy subjects (n = 10) taking part in a bioequivalence study, who was given a single oral dose of topiramate (100 mg). The comparison of hypothetical and real in vivo data demonstrated that for the C-T curves, in which there are several peaks of concentration C max,obs and t max,obs values can easily be miscalculated when the increase in concentration is not properly related to the appropriate absorption phase (63.2, 87.50, 96.88 %). It was also demonstrated that the data transformation with the use of Fibonacci sequence exposes slight differences in the observed concentration values in a semi-logarithmic scale. The results of this study show that in case of C-T curves with several peaks of concentration, the verification of C max and t max data obtained taking into account different absorption phases enables more precise evaluation of these parameters.

  14. Confirmation of quasi-static approximation in SAR evaluation for a wireless power transfer system

    NASA Astrophysics Data System (ADS)

    Hirata, Akimasa; Ito, Fumihiro; Laakso, Ilkka

    2013-09-01

    The present study discusses the applicability of the magneto-quasi-static approximation to the calculation of the specific absorption rate (SAR) in a cylindrical model for a wireless power transfer system. Resonant coils with different parameters were considered in the 10 MHz band. A two-step quasi-static method that is comprised of the method of moments and the scalar-potential finite-difference methods is applied, which can consider the effects of electric and magnetic fields on the induced SAR separately. From our computational results, the SARs obtained from our quasi-static method are found to be in good agreement with full-wave analysis for different positions of the cylindrical model relative to the wireless power transfer system, confirming the applicability of the quasi-static approximation in the 10 MHz band. The SAR induced by the external electric field is found to be marginal as compared to that induced by the magnetic field. Thus, the dosimetry for the external magnetic field, which may be marginally perturbed by the presence of biological tissue, is confirmed to be essential for SAR compliance in the 10 MHz band or lower. This confirmation also suggests that the current in the coil rather than the transferred power is essential for SAR compliance.

  15. SAR simulations for high-field MRI: how much detail, effort, and accuracy is needed?

    PubMed

    Wolf, S; Diehl, D; Gebhardt, M; Mallow, J; Speck, O

    2013-04-01

    Accurate prediction of specific absorption rate (SAR) for high field MRI is necessary to best exploit its potential and guarantee safe operation. To reduce the effort (time, complexity) of SAR simulations while maintaining robust results, the minimum requirements for the creation (segmentation, labeling) of human models and methods to reduce the time for SAR calculations for 7 Tesla MR-imaging are evaluated. The geometric extent of the model required for realistic head-simulations and the number of tissue types sufficient to form a reliable but simplified model of the human body are studied. Two models (male and female) of the virtual family are analyzed. Additionally, their position within the head-coil is taken into account. Furthermore, the effects of retuning the coils to different load conditions and the influence of a large bore radiofrequency-shield have been examined. The calculation time for SAR simulations in the head can be reduced by 50% without significant error for smaller model extent and simplified tissue structure outside the coil. Likewise, the model generation can be accelerated by reducing the number of tissue types. Local SAR can vary up to 14% due to position alone. This must be considered and sets a limit for SAR prediction accuracy. All these results are comparable between the two body models tested.

  16. Confirmation of quasi-static approximation in SAR evaluation for a wireless power transfer system.

    PubMed

    Hirata, Akimasa; Ito, Fumihiro; Laakso, Ilkka

    2013-09-07

    The present study discusses the applicability of the magneto-quasi-static approximation to the calculation of the specific absorption rate (SAR) in a cylindrical model for a wireless power transfer system. Resonant coils with different parameters were considered in the 10 MHz band. A two-step quasi-static method that is comprised of the method of moments and the scalar-potential finite-difference methods is applied, which can consider the effects of electric and magnetic fields on the induced SAR separately. From our computational results, the SARs obtained from our quasi-static method are found to be in good agreement with full-wave analysis for different positions of the cylindrical model relative to the wireless power transfer system, confirming the applicability of the quasi-static approximation in the 10 MHz band. The SAR induced by the external electric field is found to be marginal as compared to that induced by the magnetic field. Thus, the dosimetry for the external magnetic field, which may be marginally perturbed by the presence of biological tissue, is confirmed to be essential for SAR compliance in the 10 MHz band or lower. This confirmation also suggests that the current in the coil rather than the transferred power is essential for SAR compliance.

  17. ENHANCED ABSORPTION OF MILLIMETER WAVE ENERGY IN MURINE SUBCUTANEOUS BLOOD VESSELS

    PubMed Central

    Alekseev, Stanislav I.; Ziskin, Marvin C.

    2011-01-01

    The aim of the present study was to determine millimeter wave (MMW) absorption by blood vessels traversing the subcutaneous fat layer of murine skin. Most calculations were performed using the finite-difference time-domain (FDTD) technique. We used two types of models: (1) a rectangular block of multilayer tissue with blood vessels traversing the fat layer and (2) cylindrical models with circular and elliptical cross sections simulating the real geometry of murine limbs. We found that the specific absorption rate (SAR) in blood vessels normally traversing the fat layer achieved its maximal value at the parallel orientation of the E-field to the vessel axis. At 42 GHz exposure, the maximal SAR in small blood vessels could be more than 30 times greater than that in the skin. The SAR increased with decreasing the blood vessel diameter and increasing the fat thickness. The SAR decreased with increasing the exposure frequency. When the cylindrical or elliptical models of murine limbs were exposed to plane MMW, the greatest absorption of MMW energy occurred in blood vessels located on the lateral areas of the limb model. At these areas the maximal SAR values were comparable with or were greater than the maximal SAR on the front surface of the skin. Enhanced absorption of MMW energy by blood vessels traversing the fat layer may play a primary role in initiating MMW effects on blood cells and vasodilatation of cutaneous blood vessels. PMID:21344460

  18. Enhanced absorption of millimeter wave energy in murine subcutaneous blood vessels.

    PubMed

    Alekseev, Stanislav I; Ziskin, Marvin C

    2011-09-01

    The aim of the present study was to determine millimeter wave (MMW) absorption by blood vessels traversing the subcutaneous fat layer of murine skin. Most calculations were performed using the finite-difference time-domain (FDTD) technique. We used two types of models: (1) a rectangular block of multilayer tissue with blood vessels traversing the fat layer and (2) cylindrical models with circular and elliptical cross-sections simulating the real geometry of murine limbs. We found that the specific absorption rate (SAR) in blood vessels normally traversing the fat layer achieved its maximal value at the parallel orientation of the E-field to the vessel axis. At 42 GHz exposure, the maximal SAR in small blood vessels could be more than 30 times greater than that in the skin. The SAR increased with decreasing the blood vessel diameter and increasing the fat thickness. The SAR decreased with increasing the exposure frequency. When the cylindrical or elliptical models of murine limbs were exposed to plane MMW, the greatest absorption of MMW energy occurred in blood vessels located on the lateral areas of the limb model. At these areas the maximal SAR values were comparable with or were greater than the maximal SAR on the front surface of the skin. Enhanced absorption of MMW energy by blood vessels traversing the fat layer may play a primary role in initiating MMW effects on blood cells and vasodilatation of cutaneous blood vessels.

  19. Chirp Scaling Algorithms for SAR Processing

    NASA Technical Reports Server (NTRS)

    Jin, M.; Cheng, T.; Chen, M.

    1993-01-01

    The chirp scaling SAR processing algorithm is both accurate and efficient. Successful implementation requires proper selection of the interval of output samples, which is a function of the chirp interval, signal sampling rate, and signal bandwidth. Analysis indicates that for both airborne and spaceborne SAR applications in the slant range domain a linear chirp scaling is sufficient. To perform nonlinear interpolation process such as to output ground range SAR images, one can use a nonlinear chirp scaling interpolator presented in this paper.

  20. Quasi-static magnetic measurements to predict specific absorption rates in magnetic fluid hyperthermia experiments

    NASA Astrophysics Data System (ADS)

    Coral, D. F.; Mendoza Zélis, P.; de Sousa, M. E.; Muraca, D.; Lassalle, V.; Nicolás, P.; Ferreira, M. L.; Fernández van Raap, M. B.

    2014-01-01

    In this work, the issue on whether dynamic magnetic properties of polydispersed magnetic colloids modeled using physical magnitudes derived from quasi-static magnetic measurement can be extrapolated to analyze specific absorption rate data acquired at high amplitudes and frequencies of excitation fields is addressed. To this end, we have analyzed two colloids of magnetite nanoparticles coated with oleic acid and chitosan in water displaying, under a radiofrequency field, high and low specific heat power release. Both colloids are alike in terms of liquid carrier, surfactant and magnetic phase composition but differ on the nanoparticle structuring. The colloid displaying low specific dissipation consists of spaced magnetic nanoparticles of mean size around 4.8 nm inside a large chitosan particle of 52.5 nm. The one displaying high specific dissipation consists of clusters of magnetic nanoparticles of mean size around 9.7 nm inside a chitosan particle of 48.6 nm. The experimental evaluation of Néel and Brown relaxation times (˜10-10 s and 10-4 s, respectively) indicate that the nanoparticles in both colloids magnetically relax by Néel mechanism. The isothermal magnetization curves analysis for this mechanism show that the magnetic nanoparticles behave in the interacting superparamagnetic regime. The specific absorption rates were determined calorimetrically at 260 kHz and up to 52 kA/m and were well modeled within linear response theory using the anisotropy density energy retrieved from quasi-static magnetic measurement, validating their use to predict heating ability of a given polydispersed particle suspension. Our findings provide new insight in the validity of quasi-static magnetic characterization to analyze the high frequency behavior of polydispersed colloids within the framework of the linear response and Wohlfarth theories and indicate that dipolar interactions play a key role being their strength larger for the colloid displaying higher dissipation, i

  1. Terrain Measurement with SAR/InSAR

    NASA Astrophysics Data System (ADS)

    Li, Deren; Liao, Mingsheng; Balz, Timo; Zhang, Lu; Yang, Tianliang

    2016-08-01

    Terrain measurement and surface motion estimation are the most important applications for commercial and scientific SAR missions. In Dragon-3, we worked on these applications, especially regarding DEM generation, surface motion estimation with SAR time- series for urban subsidence monitoring and landslide motion estimation, as well as developing tomographic SAR processing methods in urban areas.

  2. Decadal deformation rates from SAR interferometry in the eastern Pamir-Tian Shan collision zone and implication for the growth and erosion of detachment folds

    NASA Astrophysics Data System (ADS)

    Bufe, A.; Burbank, D. W.; Bookhagen, B.

    2012-12-01

    The Cenozoic Indo-Asian collision caused the impingement of the north-verging Pamir orogen with the south-verging Tian Shan. Rapid convergence rates of 8-12 mm/y across the Pamir-Tian Shan boundary are suggested by GPS measurements and broadly match Holocene and Quaternary shortening rates. The shortening is dominantly accommodated by a series of oppositely verging thrust faults that interfere to form a complex pattern of temporal and spatial variation in deformation style and rate. Cosmogenic radionuclide (CRN) dating and optically stimulated luminescence (OSL) dating suggest late Quaternary shortening rates of 3-7 mm/y on individual structures. To the east, the rigid Tarim basin is translated northward alongside the Pamir and subducted beneath the Tian Shan. Since ~16 Ma deformation has stepped southward into the Tarim basin from the Tian Shan range-bounding fault. Most recently a series of detachment folds with inferred shortening rates of 1-5 mm/y and lateral propagation rates of up to 50-80 mm/y formed and continue to be active today. We present (1) new decadal deformation rates in the Pamir - Tian Shan and Tarim - Tian Shan collision zone in westernmost China inferred from Interferometric Synthetic Aperture Radar (InSAR) and (2) digital topography and fluvial network analysis to constrain deformation on longer timescales. These data are integrated with (3), published GPS data, (4) published Quaternary shortening rates, and (5) geologic mapping in order to identify spatial patterns of modern deformation, investigate temporal variations in deformation rate and show the response of the river network to active deformation. Preliminary InSAR results reveal interseismic deformation of 1-6 mm/y that is concentrated on thrust faults and detachment folds. However, current deformation appears localized on particular segments of the structures, a pattern that is likely to change with time. We speculate that rapid Quaternary growth of detachment folds in the Kashi

  3. Heat equation inversion framework for average SAR calculation from magnetic resonance thermal imaging.

    PubMed

    Alon, Leeor; Sodickson, Daniel K; Deniz, Cem M

    2016-10-01

    Deposition of radiofrequency (RF) energy can be quantified via electric field or temperature change measurements. Magnetic resonance imaging has been used as a tool to measure three dimensional small temperature changes associated with RF radiation exposure. When duration of RF exposure is long, conversion from temperature change to specific absorption rate (SAR) is nontrivial due to prominent heat-diffusion and conduction effects. In this work, we demonstrated a method for calculation of SAR via an inversion of the heat equation including heat-diffusion and conduction effects. This method utilizes high-resolution three dimensional magnetic resonance temperature images and measured thermal properties of the phantom to achieve accurate calculation of SAR. Accuracy of the proposed method was analyzed with respect to operating frequency of a dipole antenna and parameters used in heat equation inversion. Bioelectromagnetics. 37:493-503, 2016. © 2016 Wiley Periodicals, Inc.

  4. SAR transmitter

    NASA Astrophysics Data System (ADS)

    1983-06-01

    In the follow-on of the ESA contract 4122/79 it was intended to demonstrate on breadboard the feasibility of a modular EPC supplied by a multibus for a KLYSTRON power transmitter. The aim of this final report is to give details on the design and on test results of the electronics required to drive a KLYSTRON for a SAR system. The concept utilized for the DC/DC conversion is a Series Resonant type (SCHWARZ Converter). An elegant Breadboard of 2 Modules (over 4 required for the complete EPC) has been realized and the tests have demonstrated the envisaged feasibility of an active redundancy with modular EPC both for output voltage generation and for output power. Also the concept of the multibus has been implemented (2 bus over 4) and verified in the EPC breadboard.

  5. Shock tube/laser absorption measurements of the reaction rates of OH with ethylene and propene.

    PubMed

    Vasu, Subith S; Hong, Zekai; Davidson, David F; Hanson, Ronald K; Golden, David M

    2010-11-04

    Reaction rates of hydroxyl (OH) radicals with ethylene (C₂H₄) and propene (C₃H₆) were studied behind reflected shock waves. OH + ethylene → products (rxn 1) rate measurements were conducted in the temperature range 973-1438 K, for pressures from 2 to 10 atm, and for initial concentrations of ethylene of 500, 751, and 1000 ppm. OH + propene → products (rxn 2) rate measurements spanned temperatures of 890-1366 K, pressures near 2.3 atm, and initial propene concentrations near 300 ppm. OH radicals were produced by shock-heating tert-butyl hydroperoxide, (CH₃)₃-CO-OH, and monitored by laser absorption near 306.7 nm. Rate constants for the reactions of OH with ethylene and propene were extracted by matching modeled and measured OH concentration time-histories in the reflected shock region. Current data are in excellent agreement with previous studies and extend the temperature range of OH + propene data. Transition state theory calculations using recent ab initio results give excellent agreement with our measurements and other data outside our temperature range. Fits (in units of cm³/mol/s) to the abstraction channels of OH + ethylene and OH + propene are k₁ = 2.23 × 10⁴ (T)(2.745) exp(-1115 K/T) for 600-2000 K and k₂ = 1.94 × 10⁶ (T)(2.229) exp(-540 K/T) for 700-1500 K, respectively. A rate constant determination for the reaction TBHP → products (rxn 3) was also obtained in the range 745-1014 K using OH data from behind both incident and reflected shock waves. These high-temperature measurements were fit with previous low-temperature data, and the following rate expression (0.6-2.6 atm), applicable over the temperature range 400-1050 K, was obtained: k₃ (1/s) = 8.13 × 10⁻¹² (T)(7.83) exp(-14598 K/T).

  6. Activable enriched stable isotope iron-58 for monitoring absorption rate of juvenile athletes for iron: a case study.

    PubMed

    Qian, Qinfang; Chai, Zhifang; Feng, Weiyu; Chen, Jidi; Zhang, Peiqun; Pan, Jianxiang

    2002-09-01

    Activable enriched stable isotopes can play a unique role in studies of nutritional status, metabolism, absorption rates, and bioavailability of minerals. As a practical example, eight juvenile athletes were selected to test the absorption rates of iron during training and non-training periods by enriched stable isotope of Fe-58 (enriched degree: 51.1%) via activation analysis Fe-58 (n, gamma) Fe-59 of the collected feces samples. The results indicated that the average iron absorption rates of the juvenile athletes with and without training are 9.1 +/- 2.8 and 11.9 +/- 4.7%, respectively, which implies that the long-term endurance training with high intensity makes the iron absorption rate of athletes lower. In the meantime, the comparison of the activable enriched isotope technique with atomic absorption spectrometry was performed, which showed that the former was better than the latter in reliability and sensitivity. It is because this nuclear method can distinguish the exogenous and endogenous iron in the samples, but not for non-nuclear methods.

  7. Study of the influence of the laterality of mobile phone use on the SAR induced in two head models

    NASA Astrophysics Data System (ADS)

    Ghanmi, Amal; Varsier, Nadège; Hadjem, Abdelhamid; Conil, Emmanuelle; Picon, Odile; Wiart, Joe

    2013-05-01

    The objective of this paper is to investigate and to analyse the influence of the laterality of mobile phone use on the exposure of the brain to radio-frequencies (RF) and electromagnetic fields (EMF) from different mobile phone models using the finite-difference time-domain (FDTD) method. The study focuses on the comparison of the specific absorption rate (SAR) induced on the right and left sides of two numerical adult and child head models. The heads are exposed by both phone models operating in GSM frequency bands for both ipsilateral and contralateral configurations. A slight SAR difference between the two sides of the heads is noted. The results show that the variation between the left and the right sides is more important at 1800 MHz for an ipsilateral use. Indeed, at this frequency, the variation can even reach 20% for the SAR10g and the SAR1g induced in the head and in the brain, respectively. Moreover, the average SAR induced by the mobile phone in the half hemisphere of the brain in ipsilateral exposure is higher than in contralateral exposure. Owing to the superficial character of energy deposition at 1800 MHz, this difference in the SAR induced for the ipsilateral and contralateral usages is more significant at 1800 MHz than at 900 MHz. The results have shown that depending on the phantom head models, the SAR distribution in the brain can vary because of differences in anatomical proportions and in the geometry of the head models. The induced SAR in child head and in sub-regions of the brain is significantly higher (up to 30%) compared to the adult head. This paper confirms also that the shape/design of the mobile and the location of the antenna can have a large influence at high frequency on the exposure of the brain, particularly on the SAR distribution and on the distinguished brain regions.

  8. Measurement and validation of GHz-band whole-body average SAR in a human volunteer using reverberation chamber

    NASA Astrophysics Data System (ADS)

    Wang, Jianqing; Suzuki, Tokio; Fujiwara, Osamu; Harima, Katsushige

    2012-12-01

    The World Health Organization’s (WHO) recommendation on the need for further research for radio-frequency dosimetry has promoted studies on the whole-body average-specific absorption rate (WBA-SAR) in various kinds of anatomical-based numerical models. For experimental validation of GHz-band WBA-SARs in a real human, however, there have not so far been any published papers, despite the fact that, in 1982, Hill measured WBA-SARs at frequencies less than 40 MHz in human volunteers using a TEM-cell exposure system. In this study, we provide a measurement technique with a reverberation chamber for validating numerical dosimetry results on GHz-band WBA-SARs in living humans. We measured WBA-SARs at 1, 1.5 and 2 GHz for a 22 year old male volunteer, with a height of 173 cm and a weight of 73 kg, in the reverberation chamber, and compared the results with the finite-difference time-domain (FDTD) simulation. The reverberation chamber was excited by using a signal generator through an amplifier with an output power of 30-40 mW, which produced inside the chamber with the volunteer an average electric field strength of 5 V m-1 equivalent to an average power spectral density of 6.6 μW cm-2. The WBA-SARs were obtained from the measured S11 and S21 together with the power density. On the other hand, the WBA-SARs have been calculated using the FDTD method for an adult male model with almost the same physique as that of the volunteer exposed to the electromagnetic field in the reverberation chamber. From the comparison between the measured and the calculated WBA-SARs, we could confirm that the measured GHz-band WBA-SARs approximately agree with the FDTD calculated results.

  9. Comparison of SAR in realistic fetus models of two fetal positions exposed to electromagnetic wave from business portable radio close to maternal abdomen.

    PubMed

    Akimoto, Shimpei; Nagaoka, Tomoaki; Saito, Kazuyuki; Watanabe, Soichi; Takahashi, Masaharu; Ito, Koichi

    2010-01-01

    Since the diversification of the electromagnetic (EM) environment is spreading, it is essential to estimate the EM energy absorption rate [specific absorption rate (SAR)] of a pregnant woman's body and her fetus under various exposure situations. For example, if pregnant women work in jobs where they might wear business portable radios around their abdomens, they should also be concerned about this issue, because the fetuses are in their abdomens. In this paper, in order to evaluate the SAR in the pregnant woman and her fetus when wearing the wireless radio terminal on her abdomen, the SAR distribution in the fetus is calculated using the numerical model of the pregnant woman by exposed to near-field of a normal mode helical antenna (NHA) with a metallic case at 150 MHz. In addition, the SAR in the fetus will be evaluated under two fetal positions. It was found that the fetal SARs are greatly affected by the distance and penetration path from the antenna to the fetal surface. In addition, the fetal SARs are lower than the RF safety guidelines for occupational exposure.

  10. Electromagnetic absorption in the head of adults and children due to mobile phone operation close to the head.

    PubMed

    de Salles, Alvaro A; Bulla, Giovani; Rodriguez, Claudio E Fernández

    2006-01-01

    The Specific Absorption Rate (SAR) produced by mobile phones in the head of adults and children is simulated using an algorithm based on the Finite Difference Time Domain (FDTD) method. Realistic models of the child and adult head are used. The electromagnetic parameters are fitted to these models. Comparison also are made with the SAR calculated in the children model when using adult human electromagnetic parameters values. Microstrip (or patch) antennas and quarter wavelength monopole antennas are used in the simulations. The frequencies used to feed the antennas are 1850 MHz and 850 MHz. The SAR results are compared with the available international recommendations. It is shown that under similar conditions, the 1g-SAR calculated for children is higher than that for the adults. When using the 10-year old child model, SAR values higher than 60% than those for adults are obtained.

  11. CHBr3 (bromoform): Revised UV Absorption Spectrum and Atmospheric Photolysis Rates

    NASA Astrophysics Data System (ADS)

    Burkholder, J. B.; Papanastasiou, D.; McKeen, S. A.

    2013-12-01

    CHBr3 (bromoform) is a short-lived atmospheric trace compound primarily of natural origin that is a source of reactive bromine in both the troposphere and stratosphere. Estimating the impact of CHBr3 on the environment and its transport to the stratosphere requires a thorough understanding of its atmospheric loss processes, which are primarily UV photolysis and reaction with the OH radical. In this presentation, new measurements of the UV absorption spectrum of CHBr3 will be presented. Spectra were measured at wavelengths between 300 and 345 nm at temperatures between 260 and 330 K using cavity ring-down spectroscopy. The present results will be compared with currently recommended values for use in atmospheric modeling taken from Moortgat et al. [The tropospheric chemistry of ozone in the polar regions, edited by H. Niki and K. H. Becker, Springer-Verlag Berlin Heidelberg, 1993]. The discrepancies and impact on CHBr3 photolysis lifetime will be discussed. A parameterization of the CHBr3 UV spectrum for use in atmospheric models will be presented and local photolysis rate calculations used to highlight the impact of the revised cross section data on local lifetimes and the relative importance of photolysis loss versus reaction with the OH radical. The results from the present study will contribute to a better understanding (and accuracy) of estimates of stratospheric ozone loss due to very short-lived brominated substances.

  12. Potential chlorofluorocarbon replacements: OH reaction rate constants between 250 and 315 K and infrared absorption spectra

    SciTech Connect

    Garland, N.L.; Medhurst, L.J.; Nelson, H.H.

    1993-12-20

    The authors measured the rate constant for reactions of the OH radical with several potential chlorofluorocarbon replacements over the temperature range 251-314 K using laser photolysis laser-induced fluorescence techniques. The compounds studied and Arrhenius parameters determined from fits to the measured rate constants are as follows: CHF{sub 2}OCHF{sub 2} (E 134), k(T) = (5.4 {+-} 3.5) x 10{sup {minus}13} cm{sup 3} s{sup {minus}1} exp [({minus}3.1 {+-} 0.4 kcal mol{sup {minus}1})/RT]; CF{sub 3}CH{sub 2}CF{sub 3} (FC 236fa), k(T) = (2.0 {+-} 1.0) x 10{sup {minus}14} cm{sup 3} s{sup {minus}1} exp [({minus}1.8 {+-} 0.3 kcal mol{sup {minus}1})/RT]; CF{sub 3}CHFCHF{sub 2} (FC 236ea), k(T) = (2.0 {+-} 0.9) x 10{sup {minus}13} cm{sup 3} s{sup {minus}1} exp [({minus}2.0 {+-} 0.3 kcal mol{sup {minus}1})/RT]; and CF{sub 3}CF{sub 2}CH{sub 2}F (FC 236cb), k(T) = (2.6 {+-} 1.6) x 10{sup {minus}13} cm{sup 3} s{sup {minus}1} exp [({minus}2.2 {+-} 0.4 kcal mol{sup {minus}1})/RT]. The measured activation energies (2-3 kcal mol{sup {minus}1}) are consistent with a mechanism of H atom abstraction. The tropospheric lifetimes, estimated from the measured OH reaction rates, and measured integrated infrared absorption cross sections over the range 770 to 1430 cm{sup {minus}1} suggest that E 134 and FC 236fa may have significant global warming potential, while FC 236ea and FC 236cb do not. 17 refs., 4 figs., 3 tabs.

  13. SAR measurement due to mobile phone exposure in a simulated biological media.

    PubMed

    Behari, J; Nirala, Jay Prakash

    2012-09-01

    The specific absorption rate (SAR) measurements are carried out for compliance testing of personal 3G Mobile phone. The accuracy of this experimental setup has been checked by comparing the SAR in 10 gm of simulated tissue and an arbitrary shaped box. This has been carried out using a 3G mobile Phone at 1718.5 MHz, in a medium simulating brain and muscle phantom. The SAR measurement system consists of a stepper motor to move a monopole E-field probe in two dimensions inside an arbitrary shaped box. The phantom is filled with appropriate frequency-specific fluids with measured electrical properties (dielectric constant and conductivity). That is close to the average for gray and white matters of the brain at the frequencies of interest (1718.5 MHz). Induced fields are measured using a specially designed monopole probe in its close vicinity. The probe is immersed in the phantom material. The measured data for induced fields are used to compute SAR values at various locations with respect to the mobile phone location. It is concluded that these SAR values are position dependent and well below the safety criteria prescribed for human exposure.

  14. SAR exposure from UHF RFID reader in adult, child, pregnant woman, and fetus anatomical models.

    PubMed

    Fiocchi, Serena; Markakis, Ioannis A; Ravazzani, Paolo; Samaras, Theodoros

    2013-09-01

    The spread of radio frequency identification (RFID) devices in ubiquitous applications without their simultaneous exposure assessment could give rise to public concerns about their potential adverse health effects. Among the various RFID system categories, the ultra high frequency (UHF) RFID systems have recently started to be widely used in many applications. This study addresses a computational exposure assessment of the electromagnetic radiation generated by a realistic UHF RFID reader, quantifying the exposure levels in different exposure scenarios and subjects (two adults, four children, and two anatomical models of women 7 and 9 months pregnant). The results of the computations are presented in terms of the whole-body and peak spatial specific absorption rate (SAR) averaged over 10 g of tissue to allow comparison with the basic restrictions of the exposure guidelines. The SAR levels in the adults and children were below 0.02 and 0.8 W/kg in whole-body SAR and maximum peak SAR levels, respectively, for all tested positions of the antenna. On the contrary, exposure of pregnant women and fetuses resulted in maximum peak SAR(10 g) values close to the values suggested by the guidelines (2 W/kg) in some of the exposure scenarios with the antenna positioned in front of the abdomen and with a 100% duty cycle and 1 W radiated power.

  15. B1-based SAR reconstruction using contrast source inversion-electric properties tomography (CSI-EPT).

    PubMed

    Balidemaj, Edmond; van den Berg, Cornelis A T; van Lier, Astrid L H M W; Nederveen, Aart J; Stalpers, Lukas J A; Crezee, Hans; Remis, Rob F

    2017-02-01

    Specific absorption rate (SAR) assessment is essential for safety purposes during MR acquisition. Online SAR assessment is not trivial and requires, in addition, knowledge of the electric tissue properties and the electric fields in the human anatomy. In this study, the potential of the recently developed CSI-EPT method to reconstruct SAR distributions is investigated. This method is based on integral representations for the electromagnetic field and attempts to reconstruct the tissue parameters and the electric field strength based on [Formula: see text] field data only. Full three-dimensional FDTD simulations using a female pelvis model are used to validate two-dimensional CSI reconstruction results in the central transverse plane of a 3T body coil. Numerical experiments demonstrate that the reconstructed SAR distributions are in good agreement with the SAR distributions as determined via 3D FDTD simulations and show that these distributions can be computed very efficiently in the central transverse plane of a body coil with the two-dimensional approach of CSI-EPT.

  16. On the SAR and field inhomogeneity of birdcage coils loaded with the human head.

    PubMed

    Jin, J; Chen, J

    1997-12-01

    Birdcage coils are widely used as a radiofrequency (RF) resonator in magnetic resonance imaging (MRI) because of their capability to produce a highly homogeneous B1 field over a large volume within the coil. When they are employed for high-frequency MRI, the interaction between the electromagnetic field and the object to be imaged deteriorates the B1-field homogeneity and increases the specific absorption rate (SAR) in the object. To investigate this problem, a finite-element method (FEM) is developed to analyze the SAR and the B1 field in a two-dimensional (2D) model of a birdcage coil loaded with a 2D model of a human head. The electric field, magnetic field, and SAR distributions are shown, and a comprehensive study is carried out for both linear and quadrature birdcage coils at 64, 128, 171, and 256 MHz. It is shown that to generate the same value of the B1 field, the SAR is increased significantly with the frequency, and for the same imaging method the SAR produced by a quadrature coil is significantly lower than that of a linear coil. It is also shown that the B1-field inhomogeneity is increased significantly with the frequency.

  17. A multichannel, real-time MRI RF power monitor for independent SAR determination

    SciTech Connect

    El-Sharkawy, AbdEl-Monem M.; Qian Di; Bottomley, Paul A.; Edelstein, William A.

    2012-05-15

    Purpose: Accurate measurements of the RF power delivered during clinical MRI are essential for safety and regulatory compliance, avoiding inappropriate restrictions on clinical MRI sequences, and for testing the MRI safety of peripheral and interventional devices at known RF exposure levels. The goal is to make independent RF power measurements to test the accuracy of scanner-reported specific absorption rate (SAR) over the extraordinary range of operating conditions routinely encountered in MRI. Methods: A six channel, high dynamic range, real-time power profiling system was designed and built for monitoring power delivery during MRI up to 440 MHz. The system was calibrated and used in two 3 T scanners to measure power applied to human subjects during MRI scans. The results were compared with the scanner-reported SAR. Results: The new power measurement system has highly linear performance over a 90 dB dynamic range and a wide range of MRI duty cycles. It has about 0.1 dB insertion loss that does not interfere with scanner operation. The measurements of whole-body SAR in volunteers showed that scanner-reported SAR was significantly overestimated by up to about 2.2 fold. Conclusions: The new power monitor system can accurately and independently measure RF power deposition over the wide range of conditions routinely encountered during MRI. Scanner-reported SAR values are not appropriate for setting exposure limits during device or pulse sequence testing.

  18. Assessment of induced SAR in children exposed to electromagnetic plane waves between 10 MHz and 5.6 GHz

    NASA Astrophysics Data System (ADS)

    Bakker, J. F.; Paulides, M. M.; Christ, A.; Kuster, N.; van Rhoon, G. C.

    2010-06-01

    To avoid potentially adverse health effects of electromagnetic fields (EMF), the International Commission on Non-Ionizing Radiation Protection (ICNIRP) has defined EMF reference levels from the basic restrictions on the induced whole-body-averaged specific absorption rate (SARwb) and the peak 10 g spatial-averaged SAR (SAR10g). The objective of this study is to assess if the SAR in children remains below the basic restrictions upon exposure at the reference levels. Finite difference time domain (FDTD) modeling was used to calculate the SAR in six children and two adults when exposed to all 12 orthogonal plane wave configurations. A sensitivity study showed an expanded uncertainty of 53% (SARwb) and 58% (SAR10g) due to variations in simulation settings and tissue properties. In this study, we found that the basic restriction on the SARwb is occasionally exceeded for children, up to a maximum of 45% in small children. The maximum SAR10g values, usually found at body protrusions, remain under the limit for all scenarios studied. Our results are in good agreement with the literature, suggesting that the recommended ICNIRP reference levels may need fine tuning.

  19. SAR Reduction in 7T C-Spine Imaging Using a “Dark Modes” Transmit Array Strategy

    PubMed Central

    Eryaman, Yigitcan; Guerin, Bastien; Keil, Boris; Mareyam, Azma; Herraiz, Joaquin L.; Kosior, Robert K.; Martin, Adrian; Torrado-Carvajal, Angel; Malpica, Norberto; Hernandez-Tamames, Juan A.; Schiavi, Emanuele; Adalsteinsson, Elfar; Wald, Lawrence L.

    2016-01-01

    Purpose Local specific absorption rate (SAR) limits many applications of parallel transmit (pTx) in ultra high-field imaging. In this Note, we introduce the use of an array element, which is intentionally inefficient at generating spin excitation (a “dark mode”) to attempt a partial cancellation of the electric field from those elements that do generate excitation. We show that adding dipole elements oriented orthogonal to their conventional orientation to a linear array of conventional loop elements can lower the local SAR hotspot in a C-spine array at 7 T. Methods We model electromagnetic fields in a head/torso model to calculate SAR and excitation B1+ patterns generated by conventional loop arrays and loop arrays with added electric dipole elements. We utilize the dark modes that are generated by the intentional and inefficient orientation of dipole elements in order to reduce peak 10g local SAR while maintaining excitation fidelity. Results For B1+ shimming in the spine, the addition of dipole elements did not significantly alter the B1+ spatial pattern but reduced local SAR by 36%. Conclusion The dipole elements provide a sufficiently complimentary B1+ and electric field pattern to the loop array that can be exploited by the radiofrequency shimming algorithm to reduce local SAR. PMID:24753012

  20. SAR compliance assessment of PMR 446 and FRS walkie-talkies.

    PubMed

    Vermeeren, Günter; Joseph, Wout; Martens, Luc

    2015-10-01

    The vast amount of studies on radiofrequency dosimetry deal with exposure due to mobile devices and base station antennas for cellular communication systems. This study investigates compliance of walkie-talkies to exposure guidelines established by the International Commission on Non-Ionizing Radiation Protection and the Federal Communications Committee. The generic walkie-talkie consisted of a helical antenna and a ground plane and was derived by reverse engineering of a commercial walkie-talkie. Measured and simulated values of antenna characteristics and electromagnetic near fields of the generic walkie-talkie were within 2% and 8%, respectively. We also validated normalized electromagnetic near fields of the generic walkie-talkie against a commercial device and observed a very good agreement (deviation <6%). We showed that peak localized specific absorption rate (SAR) induced in the oval flat phantom by the generic walkie-talkie is in agreement with four commercial devices if input power of the generic walkie-talkie is rescaled based on magnetic near field. Finally, we found that SAR of commercial devices is within current SAR limits for general public exposure for a worst-case duty cycle of 100%, that is, about 3 times and 6 times lower than the limit on the 1 g SAR (1.6 W/kg) and 10 g SAR (2 W/kg), respectively. But, an effective radiated power as specified by the Private Mobile Radio at 446 MHz (PMR 446) radio standard can cause localized SAR exceeding SAR limits for 1 g of tissue.

  1. STAP for SAR

    DTIC Science & Technology

    2003-04-01

    UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADP014042 TITLE: STAP for SAR DISTRIBUTION: Approved for public release...compilation report: ADP014040 thru ADP014047 UNCLASSIFIED 3-1 STAP for SAR A. Farina Technical Directorate, Radar & Technology Division Alenia...Adaptive Processing) to Synthetic Aperture Radar ( SAR ) systems. SAR is a microwave sensor that allows us to have a high resolution mapping of

  2. Survey on Different Samsung with Nokia Smart Mobile Phones in the Specific Absorption Rate Electrical Field of Head.

    PubMed

    Fakhri, Yadolah; Alinejad, Azim; Keramati, Hassan; Bay, Abotaleb; Avazpour, Moayed; Zandsalimi, Yahya; Moradi, Bigard; Rasouli Amirhajeloo, Leila; Mirzaei, Maryam

    2016-09-01

    The use of smart phones is increasing in the world. This excessive use, especially in the last two decades, has created too much concern on the effects of emitted electromagnetic fields and specific absorption rate on human health. In this descriptive-analytical study of the electric field resulting from smart phones of Samsung and Nokia by portable measuring device, electromagnetic field, Model HI-3603-VDT/VLF, were measured. Then, head absorption rate was calculated in these two mobiles by ICNIRP equation. Finally, the comparison of specific absorption rate, especially between Samsung and Nokia smart phones, was conducted by T-Test statistics analysis. The mean of electric field for Samsung and Nokia smart mobile phones was obtained 1.8 ±0.19 v/m  and 2.23±0.39 v/m , respectively, while the range of the electric field was obtained as 1.56-2.21 v/m and 1.69-2.89 v/m for them, respectively. The mean of specific absorption rate in Samsung and Nokia was obtained 0.002 ± 0.0005 W/Kg and 0.0041±0.0013 W/Kg at the frequency of 900 MHz and 0.004±0.001 W/Kg and 0.0062±0.0002 W/Kg at the frequency of 1800 MHz respectively. The ratio of mean electronic field to guidance in the Samsung mobile phone at the frequency of 900 MHz and 1800 MHz was 4.36% and 3.34%, while was 5.62% and 4.31% in the Nokia mobile phone, respectively. The ratio of mean head specific absorption rate in smart mobile phones of Samsung and Nokia in the guidance level at the frequency of 900 was 0.15% and 0.25%, respectively, while was 0.23 %and 0.38% at the frequency of 1800 MHz, respectively. The rate of specific absorption of Nokia smart  mobile phones at the frequencies of 900 and 1800 MHz  was significantly higher than Samsung (p value <0.05). Hence, we can say that in a fixed period, health risks of Nokia smart phones is higher than Samsung smart mobile phone.

  3. Survey on Different Samsung with Nokia Smart Mobile Phones in the Specific Absorption Rate Electrical Field of Head

    PubMed Central

    Fakhri, Yadolah; Alinejad, Azim; Keramati, Hassan; Bay, Abotaleb; Avazpour, Moayed; Zandsalimi, Yahya; Moradi, Bigard; Amirhajeloo, Leila Rasouli; Mirzaei, Maryam

    2016-01-01

    The use of smart phones is increasing in the world. This excessive use, especially in the last two decades, has created too much concern on the effects of emitted electromagnetic fields and specific absorption rate on human health. In this descriptive-analytical study of the electric field resulting from smart phones of Samsung and Nokia by portable measuring device, electromagnetic field, Model HI-3603-VDT/VLF, were measured. Then, head absorption rate was calculated in these two mobiles by ICNIRP equation. Finally, the comparison of specific absorption rate, especially between Samsung and Nokia smart phones, was conducted by T-Test statistics analysis. The mean of electric field for Samsung and Nokia smart mobile phones was obtained 1.8 ±0.19 v/m and 2.23±0.39 v/m, respectively, while the range of the electric field was obtained as 1.56-2.21 v/m and 1.69-2.89 v/m for them, respectively. The mean of specific absorption rate in Samsung and Nokia was obtained 0.002 ± 0.0005 W/Kg and 0.0041±0.0013 W/Kg at the frequency of 900 MHz and 0.004±0.001 W/Kg and 0.0062±0.0002 W/Kg at the frequency of 1800 MHz respectively. The ratio of mean electronic field to guidance in the Samsung mobile phone at the frequency of 900 MHz and 1800 MHz was 4.36% and 3.34%, while was 5.62% and 4.31% in the Nokia mobile phone, respectively. The ratio of mean head specific absorption rate in smart mobile phones of Samsung and Nokia in the guidance level at the frequency of 900 was 0.15% and 0.25%, respectively, while was 0.23% and 0.38% at the frequency of 1800 MHz, respectively. The rate of specific absorption of Nokia smart mobile phones at the frequencies of 900 and 1800 MHz was significantly higher than Samsung (p value <0.05). Hence, we can say that in a fixed period, health risks of Nokia smart phones is higher than Samsung smart mobile phone. PMID:27157169

  4. Association of acute adverse effects with high local SAR induced in the brain from prolonged RF head and neck hyperthermia

    NASA Astrophysics Data System (ADS)

    Adibzadeh, F.; Verhaart, R. F.; Verduijn, G. M.; Fortunati, V.; Rijnen, Z.; Franckena, M.; van Rhoon, G. C.; Paulides, M. M.

    2015-02-01

    To provide an adequate level of protection for humans from exposure to radio-frequency (RF) electromagnetic fields (EMF) and to assure that any adverse health effects are avoided. The basic restrictions in terms of the specific energy absorption rate (SAR) were prescribed by IEEE and ICNIRP. An example of a therapeutic application of non-ionizing EMF is hyperthermia (HT), in which intense RF energy is focused at a target region. Deep HT in the head and neck (H&N) region involves inducing energy at 434 MHz for 60 min on target. Still, stray exposure of the brain is considerable, but to date only very limited side-effects were observed. The objective of this study is to investigate the stringency of the current basic restrictions by relating the induced EM dose in the brain of patients treated with deep head and neck (H&N) HT to the scored acute health effects. We performed a simulation study to calculate the induced peak 10 g spatial-averaged SAR (psSAR10g) in the brains of 16 selected H&N patients who received the highest SAR exposure in the brain, i.e. who had the minimum brain-target distance and received high forwarded power during treatment. The results show that the maximum induced SAR in the brain of the patients can exceed the current basic restrictions (IEEE and ICNIRP) on psSAR10g for occupational environments by 14 times. Even considering the high local SAR in the brain, evaluation of acute effects by the common toxicity criteria (CTC) scores revealed no indication of a serious acute neurological effect. In addition, this study provides pioneering quantitative human data on the association between maximum brain SAR level and acute adverse effects when brains are exposed to prolonged RF EMF.

  5. Recovering Seasat SAR Data

    NASA Astrophysics Data System (ADS)

    Logan, T. A.; Arko, S. A.; Rosen, P. A.

    2013-12-01

    To demonstrate the feasibility of orbital remote sensing for global ocean observations, NASA launched Seasat on June 27th, 1978. Being the first space borne SAR mission, Seasat produced the most detailed SAR images of Earth from space ever seen to that point in time. While much of the data collected in the USA was processed optically, a mere 150 scenes had been digitally processed by March 1980. In fact, only an estimated 3% of Seasat data was ever digitally processed. Thus, for over three decades, the majority of the SAR data from this historic mission has been dormant, virtually unavailable to scientists in the 21st century. Over the last year, researchers at the Alaska Satellite Facility (ASF) Distributed Active Archive Center (DAAC) have processed the Seasat SAR archives into imagery products. A telemetry decoding system was created and the data were filtered into readily processable signal files. Due to nearly 35 years of bit rot, the bit error rate (BER) for the ASF DAAC Seasat archives was on the order of 1 out of 100 to 1 out of 100,000. This extremely high BER initially seemed to make much of the data undecodable - because the minor frame numbers are just 7 bits and no range line numbers exist in the telemetry even the 'simple' tasks of tracking the minor frame number or locating the start of each range line proved difficult. Eventually, using 5 frame numbers in sequence and a handful of heuristics, the data were successfully decoded into full range lines. Concurrently, all metadata were stored into external files. Recovery of this metadata was also problematic, the BER making the information highly suspect and, initially at least, unusable in any sort of automated fashion. Because of the BER, all of the single bit metadata fields proved unreliable. Even fields that should be constant for a data take (e.g. receiving station, day of the year) showed high variability, each requiring a median filter to be usable. The most challenging, however, were the

  6. Heating from free-free absorption and the mass-loss rate of the progenitor stars to supernovae

    SciTech Connect

    Björnsson, C.-I.; Lundqvist, P. E-mail: peter@astro.su.se

    2014-06-01

    An accurate determination of the mass-loss rate of the progenitor stars to core-collapse supernovae is often limited by uncertainties pertaining to various model assumptions. It is shown that under conditions when the temperature of the circumstellar medium is set by heating due to free-free absorption, observations of the accompanying free-free optical depth allow a direct determination of the mass-loss rate from observed quantities in a rather model-independent way. The temperature is determined self-consistently, which results in a characteristic time dependence of the free-free optical depth. This can be used to distinguish free-free heating from other heating mechanisms. Since the importance of free-free heating is quite model dependent, this also makes possible several consistency checks of the deduced mass-loss rate. It is argued that the free-free absorption observed in SN 1993J is consistent with heating from free-free absorption. The deduced mass-loss rate of the progenitor star is, approximately, 10{sup –5} M {sub ☉} yr{sup –1} for a wind velocity of 10 km s{sup –1}.

  7. SAR change detection MTI

    NASA Astrophysics Data System (ADS)

    Scarborough, Steven; Lemanski, Christopher; Nichols, Howard; Owirka, Gregory; Minardi, Michael; Hale, Todd

    2006-05-01

    This paper examines the theory, application, and results of using single-channel synthetic aperture radar (SAR) data with Moving Reference Processing (MRP) to focus and geolocate moving targets. Moving targets within a standard SAR imaging scene are defocused, displaced, or completely missing in the final image. Building on previous research at AFRL, the SAR-MRP method focuses and geolocates moving targets by reprocessing the SAR data to focus the movers rather than the stationary clutter. SAR change detection is used so that target detection and focusing is performed more robustly. In the cases where moving target returns possess the same range versus slow-time histories, a geolocation ambiguity results. This ambiguity can be resolved in a number of ways. This paper concludes by applying the SAR-MRP method to high-frequency radar measurements from persistent continuous-dwell SAR observations of a moving target.

  8. Between-country comparison of whole-body SAR from personal exposure data in Urban areas.

    PubMed

    Joseph, Wout; Frei, Patrizia; Röösli, Martin; Vermeeren, Günter; Bolte, John; Thuróczy, György; Gajšek, Peter; Trček, Tomaž; Mohler, Evelyn; Juhász, Péter; Finta, Viktoria; Martens, Luc

    2012-12-01

    In five countries (Belgium, Switzerland, Slovenia, Hungary, and the Netherlands), personal radio frequency electromagnetic field measurements were performed in different microenvironments such as homes, public transports, or outdoors using the same exposure meters. From the mean personal field exposure levels (excluding mobile phone exposure), whole-body absorption values in a 1-year-old child and adult male model were calculated using a statistical multipath exposure method and compared for the five countries. All mean absorptions (maximal total absorption of 3.4 µW/kg for the child and 1.8 µW/kg for the adult) were well below the International Commission on Non-Ionizing Radiation Protection (ICNIRP) basic restriction of 0.08 W/kg for the general public. Generally, incident field exposure levels were well correlated with whole-body absorptions (SAR(wb) ), although the type of microenvironment, frequency of the signals, and dimensions of the considered phantom modify the relationship between these exposure measures. Exposure to the television and Digital Audio Broadcasting band caused relatively higher SAR(wb) values (up to 65%) for the 1-year-old child than signals at higher frequencies due to the body size-dependent absorption rates. Frequency Modulation (FM) caused relatively higher absorptions (up to 80%) in the adult male.

  9. The generation of simple compliance boundaries for mobile communication base station antennas using formulae for SAR estimation.

    PubMed

    Thors, B; Hansson, B; Törnevik, C

    2009-07-07

    In this paper, a procedure is proposed for generating simple and practical compliance boundaries for mobile communication base station antennas. The procedure is based on a set of formulae for estimating the specific absorption rate (SAR) in certain directions around a class of common base station antennas. The formulae, given for both whole-body and localized SAR, require as input the frequency, the transmitted power and knowledge of antenna-related parameters such as dimensions, directivity and half-power beamwidths. With knowledge of the SAR in three key directions it is demonstrated how simple and practical compliance boundaries can be generated outside of which the exposure levels do not exceed certain limit values. The conservativeness of the proposed procedure is discussed based on results from numerical radio frequency (RF) exposure simulations with human body phantoms from the recently developed Virtual Family.

  10. [Effect of antidotes on the rate of absorption of 2,4-dinitrophenol from the digestive tract into the blood].

    PubMed

    Sen'chuk, V; Adamska, T

    1977-01-01

    An investigation of the rate of the 2,4-dinitrophenol absorption from the digestive tract into the blood with the use of an antidote and its components (activated charcoal, tannin, magnesium oxide), stach water and paraffin oil demonstrated the activated charcoal and magnesium oxide to be the best antidotes among the ones studied. The antidote exerts a somewhat less marked, but still quite a strong action.

  11. Inhaled histamine increases the rate of absorption of sodium cromoglycate from the lung.

    PubMed Central

    Richards, R; Fowler, C; Simpson, S; Renwick, A G; Holgate, S T

    1992-01-01

    Since many factors may alter lung epithelial permeability (LEP) to water soluble molecules, the effect of histamine on the absorption and clearance of inhaled sodium cromoglycate was examined in seven mildly asthmatic patients with hyperresponsive airways and eight normal subjects. The subjects underwent histamine challenge to determine the provocative concentration of histamine required to reduce the forced expiratory volume in one second (FEV1) by 20% (PC20) from baseline. On two further visits they inhaled either saline placebo or histamine and 5 min later inhaled an aerosol containing sodium cromoglycate. Measurements of FEV1 were made and blood samples taken for analysis of plasma sodium cromoglycate concentration at intervals for 3 h. In the asthmatic group histamine inhalation led to a 24 +/- 4% reduction in FEV1 but had no effect on the normal subjects. When compared with inhaled saline, histamine increased the initial pulmonary absorption of SCG without influencing the total amount of drug absorbed in both asthmatics and normals. These observations suggest that the pharmacokinetics of inhaled sodium cromoglycate may be altered significantly by inflammatory mediators present at the site of drug absorption from the airways. PMID:1576060

  12. Application of postured human model for SAR measurements

    NASA Astrophysics Data System (ADS)

    Vuchkovikj, M.; Munteanu, I.; Weiland, T.

    2013-07-01

    In the last two decades, the increasing number of electronic devices used in day-to-day life led to a growing interest in the study of the electromagnetic field interaction with biological tissues. The design of medical devices and wireless communication devices such as mobile phones benefits a lot from the bio-electromagnetic simulations in which digital human models are used. The digital human models currently available have an upright position which limits the research activities in realistic scenarios, where postured human bodies must be considered. For this reason, a software application called "BodyFlex for CST STUDIO SUITE" was developed. In its current version, this application can deform the voxel-based human model named HUGO (Dipp GmbH, 2010) to allow the generation of common postures that people use in normal life, ensuring the continuity of tissues and conserving the mass to an acceptable level. This paper describes the enhancement of the "BodyFlex" application, which is related to the movements of the forearm and the wrist of a digital human model. One of the electromagnetic applications in which the forearm and the wrist movement of a voxel based human model has a significant meaning is the measurement of the specific absorption rate (SAR) when a model is exposed to a radio frequency electromagnetic field produced by a mobile phone. Current SAR measurements of the exposure from mobile phones are performed with the SAM (Specific Anthropomorphic Mannequin) phantom which is filled with a dispersive but homogeneous material. We are interested what happens with the SAR values if a realistic inhomogeneous human model is used. To this aim, two human models, a homogeneous and an inhomogeneous one, in two simulation scenarios are used, in order to examine and observe the differences in the results for the SAR values.

  13. An RF dosimeter for independent SAR measurement in MRI scanners

    PubMed Central

    Qian, Di; El-Sharkawy, AbdEl-Monem M.; Bottomley, Paul A.; Edelstein, William A.

    2013-01-01

    Purpose: The monitoring and management of radio frequency (RF) exposure is critical for ensuring magnetic resonance imaging (MRI) safety. Commercial MRI scanners can overestimate specific absorption rates (SAR) and improperly restrict clinical MRI scans or the application of new MRI sequences, while underestimation of SAR can lead to tissue heating and thermal injury. Accurate scanner-independent RF dosimetry is essential for measuring actual exposure when SAR is critical for ensuring regulatory compliance and MRI safety, for establishing RF exposure while evaluating interventional leads and devices, and for routine MRI quality assessment by medical physicists. However, at present there are no scanner-independent SAR dosimeters. Methods: An SAR dosimeter with an RF transducer comprises two orthogonal, rectangular copper loops and a spherical MRI phantom. The transducer is placed in the magnet bore and calibrated to approximate the resistive loading of the scanner's whole-body birdcage RF coil for human subjects in Philips, GE and Siemens 3 tesla (3T) MRI scanners. The transducer loop reactances are adjusted to minimize interference with the transmit RF field (B1) at the MRI frequency. Power from the RF transducer is sampled with a high dynamic range power monitor and recorded on a computer. The deposited power is calibrated and tested on eight different MRI scanners. Whole-body absorbed power vs weight and body mass index (BMI) is measured directly on 26 subjects. Results: A single linear calibration curve sufficed for RF dosimetry at 127.8 MHz on three different Philips and three GE 3T MRI scanners. An RF dosimeter operating at 123.2 MHz on two Siemens 3T scanners required a separate transducer and a slightly different calibration curve. Measurement accuracy was ∼3%. With the torso landmarked at the xiphoid, human adult whole‑body absorbed power varied approximately linearly with patient weight and BMI. This indicates that whole-body torso SAR is on average

  14. An RF dosimeter for independent SAR measurement in MRI scanners

    SciTech Connect

    Qian, Di; Bottomley, Paul A.; El-Sharkawy, AbdEl-Monem M.; Edelstein, William A.

    2013-12-15

    Purpose: The monitoring and management of radio frequency (RF) exposure is critical for ensuring magnetic resonance imaging (MRI) safety. Commercial MRI scanners can overestimate specific absorption rates (SAR) and improperly restrict clinical MRI scans or the application of new MRI sequences, while underestimation of SAR can lead to tissue heating and thermal injury. Accurate scanner-independent RF dosimetry is essential for measuring actual exposure when SAR is critical for ensuring regulatory compliance and MRI safety, for establishing RF exposure while evaluating interventional leads and devices, and for routine MRI quality assessment by medical physicists. However, at present there are no scanner-independent SAR dosimeters. Methods: An SAR dosimeter with an RF transducer comprises two orthogonal, rectangular copper loops and a spherical MRI phantom. The transducer is placed in the magnet bore and calibrated to approximate the resistive loading of the scanner's whole-body birdcage RF coil for human subjects in Philips, GE and Siemens 3 tesla (3T) MRI scanners. The transducer loop reactances are adjusted to minimize interference with the transmit RF field (B{sub 1}) at the MRI frequency. Power from the RF transducer is sampled with a high dynamic range power monitor and recorded on a computer. The deposited power is calibrated and tested on eight different MRI scanners. Whole-body absorbed power vs weight and body mass index (BMI) is measured directly on 26 subjects. Results: A single linear calibration curve sufficed for RF dosimetry at 127.8 MHz on three different Philips and three GE 3T MRI scanners. An RF dosimeter operating at 123.2 MHz on two Siemens 3T scanners required a separate transducer and a slightly different calibration curve. Measurement accuracy was ∼3%. With the torso landmarked at the xiphoid, human adult whole‑body absorbed power varied approximately linearly with patient weight and BMI. This indicates that whole-body torso SAR is on

  15. CRUCIAL: Cryosat-2 Success over Inland Water and Land: Analyses and Validation of SAR and SARin Full Bit Rate Altimetric Heights

    NASA Astrophysics Data System (ADS)

    Moore, Philip; Benveniste, Jérôme; Birkinshaw, Stephen; Ambrózio, Américo; Restano, Marco

    2016-07-01

    CRUCIAL is an ESA/STSE funded project investigating innovative land and inland water applications from Cryosat-2 with a forward-look component to the future Sentinel-3 and Jason-CS/Sentinel-6 missions. The high along-track sampling of Cryosat-2 in its SAR and SARin modes offer the opportunity to recover high frequency signals over inland waters. A theoretical approach has been developed to process the FBR L1A Doppler beams to form a product using ground cell gridding, beam steering and beam stacking from which inland water heights are derivable from the retracked Cryosat-2 altimetric waveforms. Results of the processing strategy will include a comparison of waveforms and heights from the burst echoes (˜80 m along-track) and from multi-look waveforms (˜320 m along-track). SAR and SARin FBR data are available for the Amazon, Brahmaputra and Mekong for 2011-2015. FBR SAR results will be compared against stage data from the nearest gauge where applicable with heights from Tonle Sap compared against Jason-2 data from the United States Department of Agriculture. A strategy to select the number of multi-looks over rivers will also be presented. Results of FBR SARin processing for the Amazon and Brahmaputra will be presented including comparison of heights from the two antennae, extraction of slope of the ground surface and validation against ground data where appropriate.

  16. Modifying the high rate algal pond light environment and its effects on light absorption and photosynthesis.

    PubMed

    Sutherland, Donna L; Montemezzani, Valerio; Howard-Williams, Clive; Turnbull, Matthew H; Broady, Paul A; Craggs, Rupert J

    2015-03-01

    The combined use of high rate algal ponds (HRAPs) for wastewater treatment and commercial algal production is considered to be an economically viable option. However, microalgal photosynthesis and biomass productivity is constrained in HRAPs due to light limitation. This paper investigates how the light climate in the HRAP can be modified through changes in pond depth, hydraulic retention time (HRT) and light/dark turnover rate and how this impacts light absorption and utilisation by the microalgae. Wastewater treatment HRAPs were operated at three different pond depth and HRT during autumn. Light absorption by the microalgae was most affected by HRT, significantly decreasing with increasing HRT, due to increased internal self-shading. Photosynthetic performance (as defined by Pmax, Ek and α), significantly increased with increasing pond depth and decreasing HRT. Despite this, increasing pond depth and/or HRT, resulted in decreased pond light climate and overall integrated water column net oxygen production. However, increased light/dark turnover was able to compensate for this decrease, bringing the net oxygen production in line with shallower ponds operated at shorter HRT. On overcast days, modelled daily net photosynthesis significantly increased with increased light/dark turnover, however, on clear days such increased turnover did not enhance photosynthesis. This study has showed that light absorption and photosynthetic performance of wastewater microalgae can be modified through changes to pond depth, HRT and light/dark turnover.

  17. A comparative study of the PIFA and printed monopole antenna EM absorption.

    PubMed

    Hossain, Md Ikbal; Iqbal Faruque, Mohammad Rashed; Islam, Mohammad Tariqul

    2017-02-01

    This paper represents a comparative study on electromagnetic (EM) absorption in the human head between a printed monopole antenna and a planar inverted-F antenna (PIFA). The specific absorption rate (SAR) values and total absorbed power in the human head phantom are used to evaluate EM absorption for both antennae. Moreover, antenna performances in terms of return loss, radiation efficiency, and gain are also investigated in this study. The finite integration technique (FIT) based on CST Microwave studio and SAM head phantom are used in this study. The antenna performances are measured in an anechoic chamber and the SAR is tested using COMOSAR measurement system. The obtained results indicate that the printed monopole antenna lead to higher EM absorption in the human head as compared to PIFA for both GSM frequencies.

  18. Transient absorption and photocurrent microscopy show that hot electron supercollisions describe the rate-limiting relaxation step in graphene.

    PubMed

    Graham, Matt W; Shi, Su-Fei; Wang, Zenghui; Ralph, Daniel C; Park, Jiwoong; McEuen, Paul L

    2013-01-01

    Using transient absorption (TA) microscopy as a hot electron thermometer, we show that disorder-assisted acoustic-phonon supercollisions (SCs) best describe the rate-limiting relaxation step in graphene over a wide range of lattice temperatures (Tl = 5-300 K), Fermi energies (E(F) = ± 0.35 eV), and optical probe energies (~0.3-1.1 eV). Comparison with simultaneously collected transient photocurrent, an independent hot electron thermometer, confirms that the rate-limiting optical and electrical response in graphene are best described by the SC-heat dissipation rate model, H = A(T(e)(3) - T(l)(3)). Our data further show that the electron cooling rate in substrate-supported graphene is twice as fast as in suspended graphene sheets, consistent with SC model prediction for disorder.

  19. Severe acute respiratory syndrome (SARS): knowledge, attitudes, practices and sources of information among physicians answering a SARS fever hotline service.

    PubMed

    Deng, J-F; Olowokure, B; Kaydos-Daniels, S C; Chang, H-J; Barwick, R S; Lee, M-L; Deng, C-Y; Factor, S H; Chiang, C-E; Maloney, S A

    2006-01-01

    In June 2003, Taiwan introduced a severe acute respiratory syndrome (SARS) telephone hotline service to provide concerned callers with rapid access to information, advice and appropriate referral where necessary. This paper reports an evaluation of the knowledge, attitude, practices and sources of information relating to SARS among physicians who staffed the SARS fever hotline service. A retrospective survey was conducted using a self-administered postal questionnaire. Participants were physicians who staffed a SARS hotline during the SARS epidemic in Taipei, Taiwan from June 1 to 10, 2003. A response rate of 83% was obtained. All respondents knew the causative agent of SARS, and knowledge regarding SARS features and preventive practices was good. However, only 54% of respondents knew the incubation period of SARS. Hospital guidelines and news media were the major information sources. In responding to two case scenarios most physicians were likely to triage callers at high risk of SARS appropriately, but not callers at low risk. Less than half of all respondents answered both scenarios correctly. The results obtained suggest that knowledge of SARS was generally good although obtained from both medical and non-medical sources. Specific knowledge was however lacking in certain areas and this affected the ability to appropriately triage callers. Standardized education and assessment of prior knowledge of SARS could improve the ability of physicians to triage callers in future outbreaks.

  20. Studies in RF power communication, SAR, and temperature elevation in wireless implantable neural interfaces.

    PubMed

    Zhao, Yujuan; Tang, Lin; Rennaker, Robert; Hutchens, Chris; Ibrahim, Tamer S

    2013-01-01

    Implantable neural interfaces are designed to provide a high spatial and temporal precision control signal implementing high degree of freedom real-time prosthetic systems. The development of a Radio Frequency (RF) wireless neural interface has the potential to expand the number of applications as well as extend the robustness and longevity compared to wired neural interfaces. However, it is well known that RF signal is absorbed by the body and can result in tissue heating. In this work, numerical studies with analytical validations are performed to provide an assessment of power, heating and specific absorption rate (SAR) associated with the wireless RF transmitting within the human head. The receiving antenna on the neural interface is designed with different geometries and modeled at a range of implanted depths within the brain in order to estimate the maximum receiving power without violating SAR and tissue temperature elevation safety regulations. Based on the size of the designed antenna, sets of frequencies between 1 GHz to 4 GHz have been investigated. As expected the simulations demonstrate that longer receiving antennas (dipole) and lower working frequencies result in greater power availability prior to violating SAR regulations. For a 15 mm dipole antenna operating at 1.24 GHz on the surface of the brain, 730 uW of power could be harvested at the Federal Communications Commission (FCC) SAR violation limit. At approximately 5 cm inside the head, this same antenna would receive 190 uW of power prior to violating SAR regulations. Finally, the 3-D bio-heat simulation results show that for all evaluated antennas and frequency combinations we reach FCC SAR limits well before 1 °C. It is clear that powering neural interfaces via RF is possible, but ultra-low power circuit designs combined with advanced simulation will be required to develop a functional antenna that meets all system requirements.

  1. Analysis of the effect of mobile phone base station antenna loading on localized SAR and its consequences for measurements.

    PubMed

    Hansson, Björn; Thors, Björn; Törnevik, Christer

    2011-12-01

    In this work, the effect of antenna element loading on the localized specific absorption rate (SAR) has been analyzed for base station antennas. The analysis was conducted in order to determine whether localized SAR measurements of large multi-element base station antennas can be conducted using standardized procedures and commercially available equipment. More specifically, it was investigated if the antenna shifting measurement procedure, specified in the European base station exposure assessment standard EN 50383, will produce accurate localized SAR results for base station antennas larger than the specified measurement phantom. The obtained results show that SAR accuracy is affected by the presence of lossy material within distances of one wavelength from the tested antennas as a consequence of coupling and redistribution of transmitted power among the antenna elements. It was also found that the existing standardized phantom is not optimal for SAR measurements of large base station antennas. A new methodology is instead proposed based on a larger, box-shaped, whole-body phantom.

  2. Simulation of exposure and SAR estimation for adult and child heads exposed to radiofrequency energy from portable communication devices.

    PubMed

    Bit-Babik, G; Guy, A W; Chou, C-K; Faraone, A; Kanda, M; Gessner, A; Wang, J; Fujiwara, O

    2005-05-01

    The level and distribution of radiofrequency energy absorbed in a child's head during the use of a mobile phone compared to those in an adult head has been a controversial issue in recent years. It has been suggested that existing methods that are used to determine specific absorption rate (SAR) and assess compliance with exposure standards using an adult head model may not adequately account for potentially higher levels of exposure in children due to their smaller head size. The present study incorporates FDTD computations of locally averaged SAR in two different anatomically correct adult and child head models using the IEEE standard (Std. C95.3-2002) SAR averaging algorithm. The child head models were obtained by linear scaling of the adult head model to replicate the conditions of previous studies reported in the literature and also by transforming the different adult head models based on data on the external shapes of children's heads. The tissue properties of the adult and corresponding child head models were kept the same. In addition, modeling and experimental measurements were made using three spheres filled with a tissue-equivalent mixture to approximate heads of increasing size. Results show that the peak local average SAR over 1 g and 10 g of tissue and the electromagnetic energy penetration depths are about the same in all of the head models under the same exposure conditions. When making interlaboratory comparisons, the model and the SAR averaging algorithm used must be standardized to minimize controversy.

  3. New model for assessing dose, dose rate, and temperature sensitivity of radiation-induced absorption in glasses

    SciTech Connect

    Gilard, Olivier; Quadri, Gianandrea; Caussanel, Matthieu; Duval, Herve; Reynaud, Francois

    2010-11-15

    A new theoretical approach is proposed to explain the dose, dose rate and temperature sensitivity of the radiation-induced absorption (RIA) in glasses. In this paper, a {beta}{sup th}-order dispersive kinetic model is used to simulate the growth of the density of color centers in irradiated glasses. This model yields an explanation for the power-law dependence on dose and dose rate usually observed for the RIA in optical fibers. It also leads to an Arrhenius-like relationship between the RIA and the glass temperature during irradiation. With a very limited number of adjustable parameters, the model succeeds in explaining, with a good agreement, the RIA growth of two different optical fiber references over wide ranges of dose, dose rate and temperature.

  4. A novel encapsulation of N,N-diethyl-3-methylbenzamide (DEET) favorably modifies skin absorption while maintaining effective evaporation rates.

    PubMed

    Karr, Jennifer I; Speaker, Tycho J; Kasting, Gerald B

    2012-06-28

    N,N-diethyl-3-methylbenzamide (DEET) is popular insect repellent which is considered safe and effective, yet is subject to considerable skin absorption. Skin absorption decreases effective repellency since less DEET is available for evaporation. We have investigated the extent to which DEET skin absorption can be reduced and evaporation sustained through encapsulation. DEET permeation through human skin in vitro was measured for an ethanolic solution standard and for two novel topical controlled-release formulations in which the DEET active material was temporarily sequestered within a permeable, charged-film microcapsule. Evaporation measurements were gathered using Tenax TA cartridges and a sampling pump drawing air over the skin. Three formulations were studied: a previously reported microcapsule formulation (Formulation A); a newly-developed microcapsule formulation (Formulation B); and a non-encapsulated ethanol control solution. Formulation B led to a 30% reduction in DEET permeation versus control. The two microcapsule DEET formulations exhibited 36-40% higher cumulative evaporation from the skin than did the control. The vapor trapping measurements in vitro show that Formulation B provided more than 48h of effective evaporation rate for repellency, while Formulation A provided less than 35h and the ethanol control less than 15h. This establishes a technical advantage for the controlled-release approach.

  5. The estimation of 3D SAR distributions in the human head from mobile phone compliance testing data for epidemiological studies.

    PubMed

    Wake, Kanako; Varsier, Nadège; Watanabe, Soichi; Taki, Masao; Wiart, Joe; Mann, Simon; Deltour, Isabelle; Cardis, Elisabeth

    2009-10-07

    A worldwide epidemiological study called 'INTERPHONE' has been conducted to estimate the hypothetical relationship between brain tumors and mobile phone use. In this study, we proposed a method to estimate 3D distribution of the specific absorption rate (SAR) in the human head due to mobile phone use to provide the exposure gradient for epidemiological studies. 3D SAR distributions due to exposure to an electromagnetic field from mobile phones are estimated from mobile phone compliance testing data for actual devices. The data for compliance testing are measured only on the surface in the region near the device and in a small 3D region around the maximum on the surface in a homogeneous phantom with a specific shape. The method includes an interpolation/extrapolation and a head shape conversion. With the interpolation/extrapolation, SAR distributions in the whole head are estimated from the limited measured data. 3D SAR distributions in the numerical head models, where the tumor location is identified in the epidemiological studies, are obtained from measured SAR data with the head shape conversion by projection. Validation of the proposed method was performed experimentally and numerically. It was confirmed that the proposed method provided good estimation of 3D SAR distribution in the head, especially in the brain, which is the tissue of major interest in epidemiological studies. We conclude that it is possible to estimate 3D SAR distributions in a realistic head model from the data obtained by compliance testing measurements to provide a measure for the exposure gradient in specific locations of the brain for the purpose of exposure assessment in epidemiological studies. The proposed method has been used in several studies in the INTERPHONE.

  6. SAR Interferometry with TerraSAR-X

    NASA Astrophysics Data System (ADS)

    Eineder, M.; Runge, H.; Boerner, E.; Bamler, R.; Adam, N.; Schättler, B.; Breit, H.; Suchandt, S.

    2004-06-01

    The TerraSAR-X project is a public private partnership between Astrium GmbH and the German Aerospace Center DLR. Astrium will launch the satellite in late 2005 and holds the rights of commercial data exploitation. DLR is currently developing the ground segment and is responsible for the scientific exploitation of the data. Even if the mission goal is not primarily SAR interferometry, TerraSAR-X offers a number of new perspectives to SAR interferometry when compared to ERS and also ENVISAT: a) High resolution of 3 meters and better in stripmap and spotlight mode. b) The option for a burst synchronized ScanSAR mode. c) The high range bandwidth will allow large baselines and the option for highly precise DEM generation. d) X- Band will show new scattering properties. e) High observation frequency due to the short repeat cycle and variable incidence angles. f) An along track interferometric mode. The available products relevant for interferometry are presented and other relevant topics like orbit control and delta-k interferometry are discussed.

  7. Laboratory diagnosis of SARS.

    PubMed Central

    Bermingham, A; Heinen, P; Iturriza-Gómara, M; Gray, J; Appleton, H; Zambon, M C

    2004-01-01

    The emergence of new viral infections of man requires the development of robust diagnostic tests that can be applied in the differential diagnosis of acute illness, or to determine past exposure, so as to establish the true burden of disease. Since the recognition in April 2003 of the severe acute respiratory syndrome coronavirus (SARS-CoV) as the causative agent of severe acute respiratory syndrome (SARS), enormous efforts have been applied to develop molecular and serological tests for SARS which can assist rapid detection of cases, accurate diagnosis of illness and the application of control measures. International progress in the laboratory diagnosis of SARS-CoV infection during acute illness has led to internationally agreed World Health Organization criteria for the confirmation of SARS. Developments in the dissection of the human immune response to SARS indicate that serological tests on convalescent sera are essential to confirm SARS infection, given the sub-optimal predictive value of molecular detection tests performed during acute SARS illness. PMID:15306394

  8. Investigation of ionospheric effects on SAR Interferometry (InSAR): A case study of Hong Kong

    NASA Astrophysics Data System (ADS)

    Zhu, Wu; Ding, Xiao-Li; Jung, Hyung-Sup; Zhang, Qin; Zhang, Bo-Chen; Qu, Wei

    2016-08-01

    Synthetic Aperture Radar Interferometry (InSAR) has demonstrated its potential for high-density spatial mapping of ground displacement associated with earthquakes, volcanoes, and other geologic processes. However, this technique may be affected by the ionosphere, which can result in the distortions of Synthetic Aperture Radar (SAR) images, phases, and polarization. Moreover, ionospheric effect has become and is becoming further significant with the increasing interest in low-frequency SAR systems, limiting the further development of InSAR technique. Although some research has been carried out, thorough analysis of ionospheric influence on true SAR imagery is still limited. Based on this background, this study performs a thorough investigation of ionospheric effect on InSAR through processing L-band ALOS-1/PALSAR-1 images and dual-frequency Global Positioning System (GPS) data over Hong Kong, where the phenomenon of ionospheric irregularities often occurs. The result shows that the small-scale ionospheric irregularities can cause the azimuth pixel shifts and phase advance errors on interferograms. Meanwhile, it is found that these two effects result in the stripe-shaped features in InSAR images. The direction of the stripe-shaped effects keep approximately constant in space for our InSAR dataset. Moreover, the GPS-derived rate of total electron content change index (ROTI), an index to reflect the level of ionospheric disturbances, may be a useful indicator for predicting the ionospheric effect for SAR images. This finding can help us evaluate the quality of SAR images when considering the ionospheric effect.

  9. Absorbed dose rates in tissue from prompt gamma emissions from near-thermal neutron absorption

    DOE PAGES

    Schwahn, Scott O.

    2015-10-01

    Prompt gamma emission data from the International Atomic Energy Agency s Prompt Gamma-ray Neutron Activation Analysis database are analyzed to determine the absorbed dose rates in tissue to be expected when natural elements are exposed in a near-thermal neutron environment.

  10. High Repetition Rate and Frequency Stabilized Ho:YLF Laser for CO2 Differential Absorption Lidar

    NASA Technical Reports Server (NTRS)

    Bai, Yingxin; Yu, Jirong; Petros, M.; Petzar, Pau; Trieu, Bo; Lee, Hyung; Singh, U.

    2009-01-01

    High repetition rate operation of an injection seeded Ho:YLF laser has been demonstrated. For 1 kHz operation, the output pulse energy reaches 5.8mJ and the optical-to-optical efficiency is 39% when the pump power is 14.5W.

  11. Advanced digital SAR processing study

    NASA Technical Reports Server (NTRS)

    Martinson, L. W.; Gaffney, B. P.; Liu, B.; Perry, R. P.; Ruvin, A.

    1982-01-01

    A highly programmable, land based, real time synthetic aperture radar (SAR) processor requiring a processed pixel rate of 2.75 MHz or more in a four look system was designed. Variations in range and azimuth compression, number of looks, range swath, range migration and SR mode were specified. Alternative range and azimuth processing algorithms were examined in conjunction with projected integrated circuit, digital architecture, and software technologies. The advaced digital SAR processor (ADSP) employs an FFT convolver algorithm for both range and azimuth processing in a parallel architecture configuration. Algorithm performace comparisons, design system design, implementation tradeoffs and the results of a supporting survey of integrated circuit and digital architecture technologies are reported. Cost tradeoffs and projections with alternate implementation plans are presented.

  12. Enhancement of specific absorption rate by exchange coupling of the core-shell structure of magnetic nanoparticles for magnetic hyperthermia

    NASA Astrophysics Data System (ADS)

    Phadatare, M. R.; Meshram, J. V.; Gurav, K. V.; Hyeok Kim, Jin; Pawar, S. H.

    2016-03-01

    Conversion of electromagnetic energy into heat by nanoparticles (NPs) has the potential to be a powerful, non-invasive technique for biomedical applications such as magnetic fluid hyperthermia, drug release, disease treatment and remote control of single cell functions, but poor conversion efficiencies have hindered practical applications so far. In this paper, an attempt has been made to increase the efficiency of magnetic thermal induction by NPs. To increase the efficiency of magnetic thermal induction by NPs, one can take advantage of the exchange coupling between a magnetically hard core and magnetically soft shell to tune the magnetic properties of the NP and maximize the specific absorption rate, which is the gauge of conversion efficiency. In order to examine the tunability of magnetocrystalline anisotropy and its magnetic heating power, a representative magnetically hard material (CoFe2O4) has been coupled to a soft material (Ni0.5Zn0.5Fe2O4). The synthesized NPs show specific absorption rates that are of an order of magnitude larger than the conventional one.

  13. B1 field homogeneity and SAR calculations for the birdcage coil.

    PubMed

    Ibrahim, T S; Lee, R; Baertlein, B A; Robitaille, P M

    2001-02-01

    The finite-difference time-domain (FDTD) method is used to model a birdcage resonator. All the coil components, including the wires, lumped capacitors and the source, are geometrically modelled together. As such, the coupling effects within the birdcage, including the interactions of coil, source and human head, are accurately computed. A study of the transverse magnetic (B1) field homogeneity and the specific absorption rate (SAR) is presented on an anatomically detailed human head model at 64 and 200 MHz representing 1.5 and 4.7 T MRI systems respectively. Unlike that at 64 MHz, the B1 field distribution is found to be inhomogeneous at 200 MHz. Also, high local SAR values are observed in the tissue near the source due to the coupling between the source and the head at 200 MHz.

  14. B1 field homogeneity and SAR calculations for the birdcage coil

    NASA Astrophysics Data System (ADS)

    Ibrahim, T. S.; Lee, R.; Baertlein, B. A.; Robitaille, P.-M. L.

    2001-02-01

    The finite-difference time-domain (FDTD) method is used to model a birdcage resonator. All the coil components, including the wires, lumped capacitors and the source, are geometrically modelled together. As such, the coupling effects within the birdcage, including the interactions of coil, source and human head, are accurately computed. A study of the transverse magnetic (B1) field homogeneity and the specific absorption rate (SAR) is presented on an anatomically detailed human head model at 64 and 200 MHz representing 1.5 and 4.7 T MRI systems respectively. Unlike that at 64 MHz, the B1 field distribution is found to be inhomogeneous at 200 MHz. Also, high local SAR values are observed in the tissue near the source due to the coupling between the source and the head at 200 MHz.

  15. Generalized energy-aperture product limit for multi-beam and spotlight SARs

    SciTech Connect

    Karr, T.J.

    1995-12-21

    The SAR energy-aperture product limit is extended to multi-beam SARS, Spotlight and moving spotlight SARS. This fundamental limit bounds the tradeoff between energy and antenna size. The kinematic relations between design variables such as platform speed, pulse repetition frequency, beam width and area rate are analyzed in a unified framework applicable to a wide variety of SARs including strip maps, spotlights, vermer arrays and multi-beam SARS, both scanning and swept-beam. Then the energy-aperture product limit is derived from the signal-to noise requirement and the kinematic constraints. The derivation clarifies impact of multiple beams and spotlighting on SAR performance.

  16. Heating rates in furnace atomic absorption using the L'vov platform

    USGS Publications Warehouse

    Koirtyohann, S.R.; Giddings, R.C.; Taylor, H.E.

    1984-01-01

    Heating rate profiles for the furnace tube wall, the furnace atmosphere, and a L'vov platform were established for a range of conditions in a cyclically heated graphite atomizer. The tube wall profile was made by direct observation with a recording optical pyrometer. The sodium line reversal method was used to establish the heating rate of the furnace atmosphere, and appearance temperatures for a series metals of differing volatility was used to establish platform profiles. The tube wall heating rate was nearly linear at 2240??C s- until the desired temperature was reached after which the temperature remained constant. The furnace atmosphere reached a given temperature 0.2-0.4 s later than the tube wall through most of the atomize cycle. The platform lagged the tube wall 0.5-0.8 s. Under typical operating conditions the furnace atmosphere was 100-200??C cooler than the tube wall and at nearly constant temperature when the analyte vaporized from the platform. The L'vov platform causes the cyclically heated commercial furnace to approximate the behavior of a constant temperature furnace during atomization. ?? 1984.

  17. Unimolecular Decomposition Rate of the Criegee Intermediate (CH3)2COO Measured Directly with UV Absorption Spectroscopy.

    PubMed

    Smith, Mica C; Chao, Wen; Takahashi, Kaito; Boering, Kristie A; Lin, Jim Jr-Min

    2016-07-14

    The unimolecular decomposition of (CH3)2COO and (CD3)2COO was measured by direct detection of the Criegee intermediate at temperatures from 283 to 323 K using time-resolved UV absorption spectroscopy. The unimolecular rate coefficient kd for (CH3)2COO shows a strong temperature dependence, increasing from 269 ± 82 s(-1) at 283 K to 916 ± 56 s(-1) at 323 K with an Arrhenius activation energy of ∼6 kcal mol(-1). The bimolecular rate coefficient for the reaction of (CH3)2COO with SO2, kSO2, was also determined in the temperature range 283 to 303 K. Our temperature-dependent values for kd and kSO2 are consistent with previously reported relative rate coefficients kd/kSO2 of (CH3)2COO formed from ozonolysis of tetramethyl ethylene. Quantum chemical calculations of kd for (CH3)2COO are consistent with the experiment, and the combination of experiment and theory for (CD3)2COO indicates that tunneling plays a significant role in (CH3)2COO unimolecular decomposition. The fast rates of unimolecular decomposition for (CH3)2COO measured here, in light of the relatively slow rate for the reaction of (CH3)2COO with water previously reported, suggest that thermal decomposition may compete with the reactions with water and with SO2 for atmospheric removal of the dimethyl-substituted Criegee intermediate.

  18. SAR distribution in human beings when using body-worn RF transmitters.

    PubMed

    Christ, Andreas; Samaras, Theodoros; Neufeld, Esra; Klingenböck, Anja; Kuster, Niels

    2007-01-01

    This study analyzes the exposure of the human torso to electromagnetic fields caused by wireless body-mounted or handheld devices. Because of the frequency and distance ranges from 30-5800 MHz and 10 to 200 mm, respectively, both near-field and far-field effects are considered. A generic body model and simulations of anatomical models are used to evaluate the worst case tissue composition with respect to the absorption of electromagnetic energy. Both standing wave effects and enhanced coupling of reactive near-field components can lead to a specific absorption rate (SAR) increase in comparison to homogeneous tissue. In addition, the exposure and temperature increase of different inner organs is assessed. With respect to compliance testing, the observed SAR enhancement may require the introduction of a multiplication factor for the spatial peak SAR measured in the liquid-filled phantom in order to obtain a conservative exposure assessment. The observed tissue heating at the body surface under adiabatic conditions can be significant, whereas the temperature increase in the inner organs turned out to be negligible for the cases investigated.

  19. A fast, programmable hardware architecture for spaceborne SAR processing

    NASA Technical Reports Server (NTRS)

    Bennett, J. R.; Cumming, I. G.; Lim, J.; Wedding, R. M.

    1983-01-01

    The launch of spaceborne SARs during the 1980's is discussed. The satellite SARs require high quality and high throughput ground processors. Compression ratios in range and azimuth of greater than 500 and 150 respectively lead to frequency domain processing and data computation rates in excess of 2000 million real operations per second for C-band SARs under consideration. Various hardware architectures are examined and two promising candidates and proceeds to recommend a fast, programmable hardware architecture for spaceborne SAR processing are selected. Modularity and programmability are introduced as desirable attributes for the purpose of HTSP hardware selection.

  20. High repetition rate laser produced soft x-ray source for ultrafast x-ray absorption near edge structure measurements.

    PubMed

    Fourmaux, S; Lecherbourg, L; Harmand, M; Servol, M; Kieffer, J C

    2007-11-01

    Recent progress in high intensity ultrafast laser systems provides the opportunity to produce laser plasma x-ray sources exhibiting broad spectrum and high average x-ray flux that are well adapted to x-ray absorption measurements. In this paper, the development of a laser based x-ray absorption near edge structure (XANES) beamline exhibiting high repetition rate by using the Advanced Laser Light Source (ALLS) facility 100 Hz laser system (100 mJ, 35 fs at 800 nm) is presented. This system is based on a broadband tantalum solid target soft x-ray source and a grazing incidence grating spectrometer in the 1-5 nm wavelength range. To demonstrate the high potential of this laser based XANES technique in condensed matter physics, material science, or biology, measurements realized with several samples are presented: VO2 vanadium L edge, Si3N4 nitrogen K edge, and BPDA/PPD polyimide carbon K edge. The characteristics of this laser based beamline are discussed in terms of brightness, signal to noise ratio, and compared to conventional synchrotron broadband x-ray sources which allow achieving similar measurements. Apart from the very compact size and the relative low cost, the main advantages of such a laser based soft x-ray source are the picosecond pulse duration and the perfect synchronization between this x-ray probe and a laser pulse excitation which open the way to the realization of time resolved x-ray absorption measurements with picosecond range time resolution to study the dynamics of ultrafast processes and phase transition.

  1. Energy transfer among CP29 chlorophylls: calculated Förster rates and experimental transient absorption at room temperature.

    PubMed Central

    Cinque, G; Croce, R; Holzwarth, A; Bassi, R

    2000-01-01

    The energy transfer rates between chlorophylls in the light harvesting complex CP29 of higher plants at room temperature were calculated ab initio according to the Förster mechanism (Förster T. 1948, Ann. Physik. 2:55-67). Recently, the transition moment orientation of CP29 chlorophylls was determined by differential linear dichroism and absorption spectroscopy of wild-type versus mutant proteins in which single chromophores were missing (Simonetto R., Crimi M., Sandonà D., Croce R., Cinque G., Breton J., and Bassi R. 1999. Biochemistry. 38:12974-12983). In this way the Q(y) transition energy and chlorophyll a/b affinity of each binding site was obtained and their characteristics supported by reconstruction of steady-state linear dichroism and absorption spectra at room temperature. In this study, the spectral form of individual chlorophyll a and b ligands within the protein environment was experimentally determined, and their extinction coefficients were also used to evaluate the absolute overlap integral between donors and acceptors employing the Stepanov relation for both the emission spectrum and the Stokes shift. This information was used to calculate the time-dependent excitation redistribution among CP29 chlorophylls on solving numerically the Pauli master equation of the complex: transient absorption measurements in the (sub)picosecond time scale were simulated and compared to pump-and-probe experimental data in the Q(y) region on the native CP29 at room temperature upon selective excitation of chlorophylls b at 640 or 650 nm. The kinetic model indicates a bidirectional excitation transfer over all CP29 chlorophylls a species, which is particularly rapid between the pure sites A1-A2 and A4-A5. Chlorophylls b in mixed sites act mostly as energy donors for chlorophylls a, whereas site B5 shows high and bidirectional coupling independent of the pigment hosted. PMID:11023879

  2. SAR antenna calibration techniques

    NASA Technical Reports Server (NTRS)

    Carver, K. R.; Newell, A. C.

    1978-01-01

    Calibration of SAR antennas requires a measurement of gain, elevation and azimuth pattern shape, boresight error, cross-polarization levels, and phase vs. angle and frequency. For spaceborne SAR antennas of SEASAT size operating at C-band or higher, some of these measurements can become extremely difficult using conventional far-field antenna test ranges. Near-field scanning techniques offer an alternative approach and for C-band or X-band SARs, give much improved accuracy and precision as compared to that obtainable with a far-field approach.

  3. The absorption and metabolism of a single L-menthol oral versus skin administration: Effects on thermogenesis and metabolic rate.

    PubMed

    Valente, Angelica; Carrillo, Andres E; Tzatzarakis, Manolis N; Vakonaki, Elena; Tsatsakis, Aristidis M; Kenny, Glen P; Koutedakis, Yiannis; Jamurtas, Athanasios Z; Flouris, Andreas D

    2015-12-01

    We investigated the absorption and metabolism pharmacokinetics of a single L-menthol oral versus skin administration and the effects on human thermogenesis and metabolic rate. Twenty healthy adults were randomly distributed into oral (capsule) and skin (gel) groups and treated with 10 mg kg(-1) L-menthol (ORALMENT; SKINMENT) or control (lactose capsule: ORALCON; water application: SKINCON) in a random order on two different days. Levels of serum L-menthol increased similarly in ORALMENT and SKINMENT (p > 0.05). L-menthol glucuronidation was greater in ORALMENT than SKINMENT (p < 0.05). Cutaneous vasoconstriction, rectal temperature and body heat storage showed greater increase following SKINMENT compared to ORALMENT and control conditions (p < 0.05). Metabolic rate increased from baseline by 18% in SKINMENT and 10% in ORALMENT and respiratory exchange ratio decreased more in ORALMENT (5.4%) than SKINMENT (4.8%) compared to control conditions (p < 0.05). Levels of plasma adiponectin and leptin as well as heart rate variability were similar to control following either treatment (p > 0.05). Participants reported no cold, shivering, discomfort, stress or skin irritation. We conclude that a single L-menthol skin administration increased thermogenesis and metabolic rate in humans. These effects are minor following L-menthol oral administration probably due to faster glucuronidation and greater blood menthol glucuronide levels.

  4. Development of a carbonate absorption-based process for post-combustion CO2 capture: The role of biocatalyst to promote CO2 absorption rate

    USGS Publications Warehouse

    Lu, Y.; Ye, X.; Zhang, Z.; Khodayari, A.; Djukadi, T.

    2011-01-01

    An Integrated Vacuum Carbonate Absorption Process (IVCAP) for post-combustion carbon dioxide (CO2) capture is described. IVCAP employs potassium carbonate (PC) as a solvent, uses waste or low quality steam from the power plant for CO2 stripping, and employs a biocatalyst, carbonic anhydrase (CA) enzyme, for promoting the CO2 absorption into PC solution. A series of experiments were performed to evaluate the activity of CA enzyme mixed in PC solutions in a stirred tank reactor system under various temperatures, CA dosages, CO2 loadings, CO2 partial pressures, and the presence of major flue gas contaminants. It was demonstrated that CA enzyme is an effective biocatalyst for CO2 absorption under IVCAP conditions. ?? 2011 Published by Elsevier Ltd.

  5. The correlation between mass-averaged SAR and temperature elevation in the human head model exposed to RF near-fields from 1 to 6 GHz.

    PubMed

    Hirata, Akimasa; Fujiwara, Osamu

    2009-12-07

    In the present study, we investigate the relationship between the mass-averaged specific absorption rate (SAR) and temperature elevation in anatomically based Japanese head models due to the dipole antenna. A homogeneous cubical model is also used as a basis for the investigation. The frequency region considered is from 1 to 6 GHz. We focused on the averaging mass of SAR, which maximizes the correlation with local temperature elevation. An averaged SAR over 10 g was found to reasonably correlate with local temperature elevation even for frequencies from 3 to 6 GHz. The dominant factor influencing the correlation between mass-averaged SAR and temperature elevation is suggested to be the thermal diffusion length in biological tissue, together with the penetration depth of radio-frequency waves. The correlation of local temperature elevation to mass-averaged SAR is largely influenced by the blood perfusion rate, while at most 10% or less is due to the pinna, model inhomogeneity and the antenna position relative to the head model.

  6. Hydrogen capacity and absorption rate of the SAES St707 non-evaporable getter at various temperatures.

    SciTech Connect

    Hsu, Irving; Mills, Bernice E.

    2010-08-01

    A prototype of a tritium thermoelectric generator (TTG) is currently being developed at Sandia. In the TTG, a vacuum jacket reduces the amount of heat lost from the high temperature source via convection. However, outgassing presents challenges to maintaining a vacuum for many years. Getters are chemically active substances that scavenge residual gases in a vacuum system. In order to maintain the vacuum jacket at approximately 1.0 x 10{sup -4} torr for decades, nonevaporable getters that can operate from -55 C to 60 C are going to be used. This paper focuses on the hydrogen capacity and absorption rate of the St707{trademark} non-evaporable getter by SAES. Using a getter testing manifold, we have carried out experiments to test these characteristics of the getter over the temperature range of -77 C to 60 C. The results from this study can be used to size the getter appropriately.

  7. Comparing the rates of absorption and weight loss during a desorption test using near infrared spectroscopy.

    PubMed

    Qassem, M; Kyriacou, P A

    2013-05-01

    The importance of determining skin hydration has over the years prompt the development of many instruments and methods, specifically designed to assess this parameter or water contents especially in the stratum corneum, and have greatly matured to suit different anatomical sites and measure multiple attributes. Of those, Near Infrared Spectroscopy (NIRS) has gained wide interest as a precise, safe, fast and noninvasive technique for determining skin hydration due to its high sensitivity to hydrogen bonding and ability to measure the amount of water in skin directly using the intensities of overtone and combination bands of OH and HOH water bonds occurring in the NIR region, that are good indicators of the state of skin hydration. This paper reports near infrared spectrophotometric measurements using a highly sophisticated spectrophotometer in the region of 1000-2500 nm to study the water uptake and dehydration properties of skin in vitro using samples of porcine skin. Initial results of pure liquid water and skin samples have clearly displayed the prominent bands associated with water content, and desorption tests have been able to verify changes in these bands associated with water content, although a clear correlation between the rates of weight loss and absorbance loss at various hydration periods has not yet been established. These preliminary results are expected to further explain the relationship between water and skin, and its role within, in hope to aid the future development of a portable instrument based on near infrared spectroscopy that would be capable of directly measuring skin hydration and/or water content in a fast and noninvasive manner.

  8. Ingestion of insoluble dietary fibre increased zinc and iron absorption and restored growth rate and zinc absorption suppressed by dietary phytate in rats.

    PubMed

    Hayashi, K; Hara, H; Asvarujanon, P; Aoyama, Y; Luangpituksa, P

    2001-10-01

    We examined the effects of ingestion of five types of insoluble fibre on growth and Zn absorption in rats fed a marginally Zn-deficient diet (6.75 mg (0.103 mmol) Zn/kg diet) with or without added sodium phytate (12.6 mmol/kg diet). The types of insoluble fibre tested were corn husks, watermelon skin, yam-bean root (Pachyrhizus erosus) and pineapple core, and cellulose was used as a control (100 g/kg diet). Body-weight gain in the cellulose groups was suppressed by 57 % by feeding phytate. Body-weight gain in phytate-fed rats was 80 % greater in the watermelon skin fibre and yam-bean root fibre group than that in the cellulose group. Zn absorption ratio in the cellulose groups was lowered by 46 and 70 % in the first (days 7-10) and second (days 16-19) measurement periods with feeding phytate. In the rats fed the phytate-containing diets, Zn absorption ratio in the watermelon skin, yam-bean root and pineapple core fibre groups was 140, 80 and 54 % higher respectively than that in the cellulose group, in the second period. Fe absorption was not suppressed by phytate, however, feeding of these three types of fibre promoted Fe absorption in rats fed phytate-free diets. The concentration of soluble Zn in the caecal contents in the watermelon skin fibre or yam-bean root fibre groups was identical to that in the control group in spite of a higher short-chain fatty acid concentration and lower pH in the caecum. These findings indicate that ingestion of these types of insoluble fibre recovered the growth and Zn absorption suppressed by feeding a high level of phytate, and factors other than caecal fermentation may also be involved in this effect of insoluble fibre.

  9. SAR calibration technology review

    NASA Technical Reports Server (NTRS)

    Walker, J. L.; Larson, R. W.

    1981-01-01

    Synthetic Aperture Radar (SAR) calibration technology including a general description of the primary calibration techniques and some of the factors which affect the performance of calibrated SAR systems are reviewed. The use of reference reflectors for measurement of the total system transfer function along with an on-board calibration signal generator for monitoring the temporal variations of the receiver to processor output is a practical approach for SAR calibration. However, preliminary error analysis and previous experimental measurements indicate that reflectivity measurement accuracies of better than 3 dB will be difficult to achieve. This is not adequate for many applications and, therefore, improved end-to-end SAR calibration techniques are required.

  10. Magnetic nanoparticles with high specific absorption rate of electromagnetic energy at low field strength for hyperthermia therapy.

    PubMed

    Shubitidze, Fridon; Kekalo, Katsiaryna; Stigliano, Robert; Baker, Ian

    2015-03-07

    Magnetic nanoparticles (MNPs), referred to as the Dartmouth MNPs, which exhibit high specific absorption rate at low applied field strength have been developed for hyperthermia therapy applications. The MNPs consist of small (2-5 nm) single crystals of gamma-Fe2O3 with saccharide chains implanted in their crystalline structure, forming 20-40 nm flower-like aggregates with a hydrodynamic diameter of 110-120 nm. The MNPs form stable (>12 months) colloidal solutions in water and exhibit no hysteresis under an applied quasistatic magnetic field, and produce a significant amount of heat at field strengths as low as 100 Oe at 99-164 kHz. The MNP heating mechanisms under an alternating magnetic field (AMF) are discussed and analyzed quantitatively based on (a) the calculated multi-scale MNP interactions obtained using a three dimensional numerical model called the method of auxiliary sources, (b) measured MNP frequency spectra, and (c) quantified MNP friction losses based on magneto-viscous theory. The frequency responses and hysteresis curves of the Dartmouth MNPs are measured and compared to the modeled data. The specific absorption rate of the particles is measured at various AMF strengths and frequencies, and compared to commercially available MNPs. The comparisons demonstrate the superior heating properties of the Dartmouth MNPs at low field strengths (<250 Oe). This may extend MNP hyperthermia therapy to deeper tumors that were previously non-viable targets, potentially enabling the treatment of some of the most difficult cancers, such as pancreatic and rectal cancers, without damaging normal tissue.

  11. Magnetic nanoparticles with high specific absorption rate of electromagnetic energy at low field strength for hyperthermia therapy

    NASA Astrophysics Data System (ADS)

    Shubitidze, Fridon; Kekalo, Katsiaryna; Stigliano, Robert; Baker, Ian

    2015-03-01

    Magnetic nanoparticles (MNPs), referred to as the Dartmouth MNPs, which exhibit high specific absorption rate at low applied field strength have been developed for hyperthermia therapy applications. The MNPs consist of small (2-5 nm) single crystals of gamma-Fe2O3 with saccharide chains implanted in their crystalline structure, forming 20-40 nm flower-like aggregates with a hydrodynamic diameter of 110-120 nm. The MNPs form stable (>12 months) colloidal solutions in water and exhibit no hysteresis under an applied quasistatic magnetic field, and produce a significant amount of heat at field strengths as low as 100 Oe at 99-164 kHz. The MNP heating mechanisms under an alternating magnetic field (AMF) are discussed and analyzed quantitatively based on (a) the calculated multi-scale MNP interactions obtained using a three dimensional numerical model called the method of auxiliary sources, (b) measured MNP frequency spectra, and (c) quantified MNP friction losses based on magneto-viscous theory. The frequency responses and hysteresis curves of the Dartmouth MNPs are measured and compared to the modeled data. The specific absorption rate of the particles is measured at various AMF strengths and frequencies, and compared to commercially available MNPs. The comparisons demonstrate the superior heating properties of the Dartmouth MNPs at low field strengths (<250 Oe). This may extend MNP hyperthermia therapy to deeper tumors that were previously non-viable targets, potentially enabling the treatment of some of the most difficult cancers, such as pancreatic and rectal cancers, without damaging normal tissue.

  12. Magnetic nanoparticles with high specific absorption rate of electromagnetic energy at low field strength for hyperthermia therapy

    PubMed Central

    Stigliano, Robert; Baker, Ian

    2015-01-01

    Magnetic nanoparticles (MNPs), referred to as the Dartmouth MNPs, which exhibit high specific absorption rate at low applied field strength have been developed for hyperthermia therapy applications. The MNPs consist of small (2–5 nm) single crystals of gamma-Fe2O3 with saccharide chains implanted in their crystalline structure, forming 20–40 nm flower-like aggregates with a hydrodynamic diameter of 110–120 nm. The MNPs form stable (>12 months) colloidal solutions in water and exhibit no hysteresis under an applied quasistatic magnetic field, and produce a significant amount of heat at field strengths as low as 100 Oe at 99–164 kHz. The MNP heating mechanisms under an alternating magnetic field (AMF) are discussed and analyzed quantitatively based on (a) the calculated multi-scale MNP interactions obtained using a three dimensional numerical model called the method of auxiliary sources, (b) measured MNP frequency spectra, and (c) quantified MNP friction losses based on magneto-viscous theory. The frequency responses and hysteresis curves of the Dartmouth MNPs are measured and compared to the modeled data. The specific absorption rate of the particles is measured at various AMF strengths and frequencies, and compared to commercially available MNPs. The comparisons demonstrate the superior heating properties of the Dartmouth MNPs at low field strengths (<250 Oe). This may extend MNP hyperthermia therapy to deeper tumors that were previously non-viable targets, potentially enabling the treatment of some of the most difficult cancers, such as pancreatic and rectal cancers, without damaging normal tissue. PMID:25825545

  13. SAR versus VAR, and the size and shape that provide the most appropriate RF exposure metric in the range of 0.5-6 GHz.

    PubMed

    McIntosh, Robert L; Anderson, Vitas

    2011-05-01

    Basic restrictions for protecting against localized tissue heating induced from exposure to radiofrequency (RF) fields are typically specified as the specific energy absorption rate (SAR), which is mass averaged in recognition of the thermal diffusion properties of tissues. This article seeks to determine the most appropriate averaging mass (1, 3, 5, 7, or 10 g) and averaging shape (cube or sphere). We also consider an alternative metric, volumetric energy absorption rate (VAR), which uses volume averaging (over 1, 3, 5, 7, and 10 cm(3) ; cube and sphere). The SAR and VAR averaging approaches were compared by considering which was a better predictor of tissue temperature rise (ΔT) induced by near- and far-field RF exposures (0.5-6 GHz), calculated in a detailed human body model. For the exposure scenarios that we examined, VAR is better correlated with ΔT than SAR, though not at a statistically significant level for most of the metric types we studied. However, as VAR offers substantive advantages in ease of assessment we recommend this metric over SAR. Averaging over a cube or a sphere provides equivalent levels of correlation with ΔT, and so we recommend choosing the averaging shape on the basis of which is easier to assess. The optimal averaging volume is 10 cm(3) for VAR, and the optimal mass is 10 g for SAR. The correlation between VAR or SAR and ΔT diminishes substantially at 6 GHz, where incident power flux density may be a better exposure metric.

  14. Optical absorption and heating rate dependent glass transition in vanadyl doped calcium oxy-chloride borate glasses

    NASA Astrophysics Data System (ADS)

    Dahiya, M. S.; Khasa, S.; Agarwal, A.

    2015-04-01

    Some important results pertaining to optical and thermal properties of vanadyl doped oxy-halide glasses in the chemical composition CaCl2-CaO-B2O3 are discussed. These glasses have been prepared by conventional melt quench technique. From X-ray diffraction (XRD) profiles the amorphous nature of the doped glasses has been confirmed. The electronic polarizability is calculated and found to increase with increase in chloride content. The optical absorption spectra have been recorded in the frequency range of 200-3200 nm. Recorded spectra are analyzed to evaluate cut-off wavelength (λcut-off), optical band gap (Eg), band tailing (B), Urbach energy (ΔE) and refractive index (n). Thermal analysis has been carried out for the prepared glasses at three different heating rates viz. 5, 10 and 20 °C/min. The glass transition temperature (Tg) along with thermal activation energy (Ea) corresponding to each heating rate are evaluated from differential scanning calorimetry (DSC) thermographs. It is found that Ea decrease and Tg increase with increase in heating rate. The variation in Tg is also observed with the substitution of calcium chloride in place of calcium oxide. The increasing and higher values of Ea suggest that prepared glasses have good thermal stability. Variation in Tg and Eg suggests that Cl- anions enter into the voids of borate network at low concentrations (<5.0%) and contribute to the network formation at high concentration (>5.0%).

  15. Atmospheric chemistry of hydrazoic acid (HN3): UV absorption spectrum, HO reaction rate, and reactions of the N3 radical.

    PubMed

    Orlando, John J; Tyndall, Geoffrey S; Betterton, Eric A; Lowry, Joe; Stegall, Steve T

    2005-03-15

    Processes related to the tropospheric lifetime and fate of hydrazoic acid, HN3, have been studied. The ultraviolet absorption spectrum of HN3 is shown to possess a maximum near 262 nm with a tail extending to at least 360 nm. The photolysis quantum yield for HN3 is shown to be approximately 1 at 351 nm. Using the measured spectrum and assuming unity quantum yield throughout the actinic region, a diurnally averaged photolysis lifetime near the earth's surface of 2-3 days is estimated. Using a relative rate method, the rate coefficient for reaction of HO with HN3 was found to be (3.9 +/-0.8) x 10(-12) cm3 molecule(-1) s(-1), substantially larger than the only previous measurement. The atmospheric HN3 lifetime with respect to HO oxidation is thus about 2-3 days, assuming a diurnally averaged [HO] of 10(6) molecule cm(-3). Reactions of N3, the product of the reaction of HO with HN3, were studied in an environmental chamber using an FTIR spectrometer for end-product analysis. The N3 radical reacts efficiently with NO, producing N2O with 100% yield. Reaction of N3 with NO2 appears to generate both NO and N2O, although the rate coefficient for this reaction is slower than that for reaction with NO. No evidence for reaction of N3 with CO was observed, in contrast to previous literature data. Reaction of N3 with O2 was found to be extremely slow, k < 6 x 10(-20) cm3 molecule(-1) s(-1), although this upper limit does not necessarily rule out its occurrence in the atmosphere. Finally, the rate coefficient for reaction of Cl with HN3 was measured using a relative rate method, k = (1.0+/-0.2) x 10(-12) cm3 molecule(-1) s(-1).

  16. SAR Simulation with Magneto Chiral Effects for Human Head Radiated from Cellular Phones

    NASA Astrophysics Data System (ADS)

    Torres-Silva, H.

    2008-09-01

    A numerical method for a microwave signal emitted by a cellular phone, propagating in a magneto-chiral media, characterized by an extended Born-Fedorov formalism, is presented. It is shown that the use of a cell model, combined with a real model of the human head, derived from the magnetic resonance of images allows a good determination of the near fields induced in the head when the brain chirality and the battery magnetic field are considered together. The results on a 2-Dim human head model show the evolution of the specific absorption rate, (SAR coefficient) and the spatial peak specific absorption rate which are sensitives to the magneto-chiral factor, which is important in the brain layer. For GSM/PCN phones, extremely low frequency real pulsed magnetic fields (in the order of 10 to 60 milligauss) are added to the model through the whole of the user's head. The more important conclusion of our work is that the head absorption is bigger than the results for a classical model without the magneto chiral effect. Hot spots are produced due to the combination of microwave and the magnetic field produced by the phone's operation. The FDTD method was used to compute the SARs inside the MRI based head models consisting of various tissues for 1.8 GHz. As a result, we found that in the head model having more than four kinds of tissue, the localized peak SAR reaches maximum inside the head for over five tissues including skin, bone, blood and brain cells.

  17. SAR and temperature distribution in the rat head model exposed to electromagnetic field radiation by 900 MHz dipole antenna.

    PubMed

    Yang, Lei; Hao, Dongmei; Wu, Shuicai; Zhong, Rugang; Zeng, Yanjun

    2013-06-01

    Rats are often used in the electromagnetic field (EMF) exposure experiments. In the study for the effect of 900 MHz EMF exposure on learning and memory in SD rats, the specific absorption rate (SAR) and the temperature rise in the rat head are numerically evaluated. The digital anatomical model of a SD rat is reconstructed with the MRI images. Numerical method as finite difference time domain has been applied to assess the SAR and the temperature rise during the exposure. Measurements and simulations are conducted to characterize the net radiated power of the dipole to provide a precise dosimetric result. The whole-body average SAR and the localized SAR averaging over 1, 0.5 and 0.05 g mass for different organs/tissues are given. It reveals that during the given exposure experiment setup, no significant temperature rise occurs. The reconstructed anatomical rat model could be used in the EMF simulation and the dosimetric result provides useful information for the biological effect studies.

  18. Modelling millimetre wave propagation and absorption in a high resolution skin model: the effect of sweat glands

    NASA Astrophysics Data System (ADS)

    Shafirstein, Gal; Moros, Eduardo G.

    2011-03-01

    The aim of this work was to investigate the potential effect of sweat gland ducts (SGD) on specific absorption rate (SAR) and temperature distributions during mm-wave irradiation. High resolution electromagnetic and bio-heat transfer models of human skin with SGD were developed using a commercially available simulation software package (SEMCAD X™). The skin model consisted of a 30 µm stratum corneum, 350 µm epidermis and papillary dermis (EPD) and 1000 µm dermis. Five SGD of 60 µm radius and 300 µm height were embedded linearly with 370 µm separation. A WR-10 waveguide positioned 20 µm from the skin surface and delivering 94 GHz electromagnetic radiation was included in the model. Saline conductivity was assigned inside SGD. SAR and temperatures were computed with and without SGD. Despite their small scale, SAR was significantly higher within SGD than in the EPD without SGD. Without SGD, SAR and temperature maxima were in the dermis near EPD. With SGD, SAR maximum was inside SGD while temperature maximum moved to the EPD/stratum-corneum junction. Since the EPD participates actively in perception, the effect of SGD should be taken into account in nociceptive studies involving mm-waves. This research represents a significant step towards higher spatial resolution numerical modelling of the skin and shows that microstructures can play a significant role in mm-wave absorption and induced temperature distributions.

  19. Characterizing and estimating noise in InSAR and InSAR time series with MODIS

    USGS Publications Warehouse

    Barnhart, William D.; Lohman, Rowena B.

    2013-01-01

    InSAR time series analysis is increasingly used to image subcentimeter displacement rates of the ground surface. The precision of InSAR observations is often affected by several noise sources, including spatially correlated noise from the turbulent atmosphere. Under ideal scenarios, InSAR time series techniques can substantially mitigate these effects; however, in practice the temporal distribution of InSAR acquisitions over much of the world exhibit seasonal biases, long temporal gaps, and insufficient acquisitions to confidently obtain the precisions desired for tectonic research. Here, we introduce a technique for constraining the magnitude of errors expected from atmospheric phase delays on the ground displacement rates inferred from an InSAR time series using independent observations of precipitable water vapor from MODIS. We implement a Monte Carlo error estimation technique based on multiple (100+) MODIS-based time series that sample date ranges close to the acquisitions times of the available SAR imagery. This stochastic approach allows evaluation of the significance of signals present in the final time series product, in particular their correlation with topography and seasonality. We find that topographically correlated noise in individual interferograms is not spatially stationary, even over short-spatial scales (<10 km). Overall, MODIS-inferred displacements and velocities exhibit errors of similar magnitude to the variability within an InSAR time series. We examine the MODIS-based confidence bounds in regions with a range of inferred displacement rates, and find we are capable of resolving velocities as low as 1.5 mm/yr with uncertainties increasing to ∼6 mm/yr in regions with higher topographic relief.

  20. Polarimetric SAR Interferometry to Monitor Land Subsidence in Tehran

    NASA Astrophysics Data System (ADS)

    Sadeghi, Zahra; Valadan Zoej, Mohammad Javad; Muller, Jan-Peter

    2016-08-01

    This letter uses a combination of ADInSAR with a coherence optimization method. Polarimetric DInSAR is able to enhance pixel phase quality and thus coherent pixel density. The coherence optimization method is a search-based approach to find the optimized scattering mechanism introduced by Navarro-Sanchez [1]. The case study is southwest of Tehran basin located in the North of Iran. It suffers from a high-rate of land subsidence and is covered by agricultural fields. Usually such an area would significantly decorrelate but applying polarimetric ADInSAR it is possible to obtain a more coherent pixel coverage. A set of dual-pol TerraSAR-X images was ordered for polarimetric ADInSAR procedure. The coherence optimization method is shown to have increased the density and phase quality of coherent pixels significantly.

  1. SARS and Common Viral Infections

    PubMed Central

    Hacker, Jill K.; Mark, Jennifer; Gavali, Shilpa S.; Yagi, Shigeo; Espinosa, Alex; Schnurr, David P.; Cossen, Cynthia K.; Isaacson, Erin R.; Glaser, Carol A.; Fischer, Marc; Reingold, Arthur L.; Vugia, Duc J.

    2004-01-01

    In California, molecular testing was useful in decreasing suspicion for severe acute respiratory syndrome (SARS), by detecting common respiratory pathogens (influenza A/B, human metapneumovirus, picornavirus, Mycoplasma pneumoniae, Chlamydia spp., parainfluenza virus, respiratory syncytial virus, and adenovirus) in 23 (45%) of 51 patients with suspected SARS and 9 (47%) of 19 patients with probable SARS. PMID:15207072

  2. SAR11 bacteria linked to ocean anoxia and nitrogen loss

    PubMed Central

    Tsementzi, Despina; Wu, Jieying; Deutsch, Samuel; Nath, Sangeeta; Rodriguez-R, Luis M; Burns, Andrew S.; Ranjan, Piyush; Sarode, Neha; Malmstrom, Rex R.; Padilla, Cory C.; Stone, Benjamin K.; Bristow, Laura A.; Larsen, Morten; Glass, Jennifer B.; Thamdrup, Bo; Woyke, Tanja; Konstantinidis, Konstantinos T.; Stewart, Frank J.

    2016-01-01

    Summary Bacteria of the SAR11 clade constitute up to one half of all microbial cells in the oxygen-rich surface ocean. DNA sequences from SAR11 are also abundant in oxygen minimum zones (OMZs) where oxygen falls below detection and anaerobic microbes play important roles in converting bioavailable nitrogen to N2 gas. Evidence for anaerobic metabolism in SAR11 has not yet been observed, and the question of how these bacteria contribute to OMZ biogeochemical cycling is unanswered. Here, we identify the metabolic basis for SAR11 activity in anoxic ocean waters. Genomic analysis of single cells from the world’s largest OMZ revealed diverse and previously uncharacterized SAR11 lineages that peak in abundance at anoxic depths, but are largely undetectable in oxygen-rich ocean regions. OMZ SAR11 contain adaptations to low oxygen, including genes for respiratory nitrate reductases (Nar). SAR11 nar genes were experimentally verified to encode proteins catalyzing the nitrite-producing first step of denitrification and constituted ~40% of all OMZ nar transcripts, with transcription peaking in the zone of maximum nitrate reduction rates. These results redefine the ecological niche of Earth’s most abundant organismal group and suggest an important contribution of SAR11 to nitrite production in OMZs, and thus to pathways of ocean nitrogen loss. PMID:27487207

  3. Understanding the T cell immune response in SARS coronavirus infection.

    PubMed

    Janice Oh, Hsueh-Ling; Ken-En Gan, Samuel; Bertoletti, Antonio; Tan, Yee-Joo

    2012-09-01

    The severe acute respiratory syndrome (SARS) epidemic started in late 2002 and swiftly spread across 5 continents with a mortality rate of around 10%. Although the epidemic was eventually controlled through the implementation of strict quarantine measures, there continues a need to investigate the SARS coronavirus (SARS-CoV) and develop interventions should it re-emerge. Numerous studies have shown that neutralizing antibodies against the virus can be found in patients infected with SARS-CoV within days upon the onset of illness and lasting up to several months. In contrast, there is little data on the kinetics of T cell responses during SARS-CoV infection and little is known about their role in the recovery process. However, recent studies in mice suggest the importance of T cells in viral clearance during SARS-CoV infection. Moreover, a growing number of studies have investigated the memory T cell responses in recovered SARS patients. This review covers the available literature on the emerging importance of T cell responses in SARS-CoV infection, particularly on the mapping of cytotoxic T lymphocyte (CTL) epitopes, longevity, polyfunctionality and human leukocyte antigen (HLA) association as well as their potential implications on treatment and vaccine development.

  4. A new high-absorption-rate Paracetamol 500-mg formulation: a comparative bioavailability study in healthy volunteers

    PubMed Central

    Portolés, Antonio; Puerro, Miguel; Terleira, Ana; Rodríguez, Angel; Caturla, Maria-Cruz; Fernández, Nieves; Vargas, Emilio

    2003-01-01

    Background: Paracetamol is often the analgesic or antipyretic of choice, especially for patients for whom salicylates or other nonsteroidal anti-inflammatory drugs are contraindicated. Objective: The aim of this study was to compare the absorption rate of a new tablet formulation of paracetamol (500 mg) with a reference formulation of paracetamol at the same dose. Methods: This was a single-center, Phase I, open-label, randomized, 2-period, crossover, single-dose, comparative bioavailability clinical trial. During both study periods, healthy volunteers were given a single oral dose of a more hydrophilic test formulation of paracetamol, or a reference formulation. Fifteen plasma samples were obtained to determine paracetamol concentrations and to calculate kinetic parameters. Results: The study participants comprised 24 healthy volunteers (12 men, 12 women; mean [SD] age, 22.8 [1.5] years). The pharmacokinetic parameters calculated for the test versus the reference formulation were as follows: median time to maximum concentration (Tmax), 0.42 versus 0.75 hour; mean (SD) maximum plasma drug concentration (Cmax), 9.85 (2.40) μg/mL versus 8.33 (2.22) μg/mL; and mean (SD) area under the plasma concentration–time curve from time 0 to infinity (AUC0–∞), 30.16 (8.87) μg·h/mL versus 28.49 (8.57) μg · h/mL. The 90% CIs of the ratios were as follows: base e logarithm (Ln)-transformed Cmax, 105.08% to 137.59%; Ln-AUC0–∞, 102.02% to 110.43%; and the difference in Tmax, −0.375 to −0.085 hours. Conclusions: The speed of release and absorption was statistically significantly higher with the test formulation compared with the reference one (evaluated using Tmax, Cmax, and Cmax/AUC parameters). This speed is especially important for a rapid analgesic or antipyretic effect. PMID:24944391

  5. Simulation of SAR in the Human Body to Determine Effects of RF Heating

    NASA Astrophysics Data System (ADS)

    Michiyama, Tetsuyuki; Nikawa, Yoshio

    The body area network (BAN) has attracted attention because of its potential for high-grade wireless communication technology and its safety and high durability. Also, human area transmission of a BAN propagating at an ultra-wide band (UWB) has been demonstrated recently. When considering the efficiency of electromagnetic (EM) propagation inside the human body for BAN and hyperthermia treatment using RF, it is important to determine the mechanism of EM dissipation in the human body. A body heating system for hyperthermia must deposit EM energy deep inside the body. Also, it is important that the EM field generated by the implant system is sufficiently strong. In this study, the specific absorption rate (SAR) distribution is simulated using an EM simulator to consider the biological transmission mechanism and its effects. To utilize the EM field distribution using an implant system for hyperthermia treatment, the SAR distribution inside the human body is simulated. As a result, the SAR distribution is concentrated on the surface of human tissue, the muscle-bolus interface, the pancreas, the stomach, the spleen and the regions around bones. It can also be concentrated in bone marrow and cartilage. From these results, the appropriate location for the implant system is revealed on the basis of the current distribution and differences in the wave impedance of interfacing tissues. The possibility of accurate data transmission and suitable treatment planning is confirmed.

  6. admetSAR: a comprehensive source and free tool for assessment of chemical ADMET properties.

    PubMed

    Cheng, Feixiong; Li, Weihua; Zhou, Yadi; Shen, Jie; Wu, Zengrui; Liu, Guixia; Lee, Philip W; Tang, Yun

    2012-11-26

    Absorption, distribution, metabolism, excretion, and toxicity (ADMET) properties play key roles in the discovery/development of drugs, pesticides, food additives, consumer products, and industrial chemicals. This information is especially useful when to conduct environmental and human hazard assessment. The most critical rate limiting step in the chemical safety assessment workflow is the availability of high quality data. This paper describes an ADMET structure-activity relationship database, abbreviated as admetSAR. It is an open source, text and structure searchable, and continually updated database that collects, curates, and manages available ADMET-associated properties data from the published literature. In admetSAR, over 210,000 ADMET annotated data points for more than 96,000 unique compounds with 45 kinds of ADMET-associated properties, proteins, species, or organisms have been carefully curated from a large number of diverse literatures. The database provides a user-friendly interface to query a specific chemical profile, using either CAS registry number, common name, or structure similarity. In addition, the database includes 22 qualitative classification and 5 quantitative regression models with highly predictive accuracy, allowing to estimate ecological/mammalian ADMET properties for novel chemicals. AdmetSAR is accessible free of charge at http://www.admetexp.org.

  7. Occupational exposure assessment on an FM mast: electric field and SAR values.

    PubMed

    Valič, Blaž; Kos, Bor; Gajšek, Peter

    2012-01-01

    Electric field strengths normally exceed the reference levels for occupational exposure in close vicinity to large frequency modulation (FM) transmitters. Thus, a detailed investigation on compliance with basic restrictions is needed before any administrative protection measures are applied. We prepared a detailed numerical model of a 20-kW FM transmitter on a 32-m mast. An electrically isolated anatomical human model was placed in 3 different positions inside the mast in the region where the values of the electric field were highest. The electric field strengths in this region were up to 700 V/m. The highest calculated whole-body specific absorption rate (SAR) was 0.48 W/kg, whereas the maximum 10-g average SAR in the head and trunk was 1.66 W/kg. The results show that the reference levels in the FM frequency range are very conservative for near field exposure. SAR values are not exceeded even for fields 10 times stronger than the reference levels.

  8. Effect of high SARs produced by cell phone like radiofrequency fields on mollusk single neuron.

    PubMed

    Partsvania, B; Sulaberidze, T; Shoshiashvili, L

    2013-03-01

    During exposure to the cell phone electromagnetic field (EMF), some neurons in the brain at areas of peak specific absorption rate (SAR) absorb more electromagnetic energy than is permitted by existing guidelines. The goal of the present work was to investigate the influence of cell phone-like EMF signal on excitability and memory processes in single neurons. A Transverse Electromagnetic Cell (TEM Cell) was used to expose single neurons of mollusk to the EMF. Finite-Difference Time-Domain (FDTD) method was used for modeling the TEM Cell and the EMF interactions with living nerve ganglion and neurons. Neuron electrophysiology was investigated using standard microelectrode technique. SAR deposited into the single neuron was calculated to be 8.2 W/kg with a temperature increment of 1.21°C. After acute exposure, the threshold of firing of action potentials (AP) was significantly decreased (p ≈ 0.001). Time of habituation to stimulation with the intracellular current injection was increased (p ≈ 0.003). These results indicate that acute exposure to EMF at high SARs impairs the ability of neurons to store information.

  9. Validation of experimental whole-body SAR assessment method in a complex indoor environment.

    PubMed

    Bamba, Aliou; Joseph, Wout; Vermeeren, Gunter; Tanghe, Emmeric; Gaillot, Davy Paul; Andersen, Jørgen B; Nielsen, Jesper Ødum; Lienard, Martine; Martens, Luc

    2013-02-01

    Experimentally assessing the whole-body specific absorption rate (SAR(wb) ) in a complex indoor environment is very challenging. An experimental method based on room electromagnetics theory (accounting only the line-of-sight as specular path) is validated using numerical simulations with the finite-difference time-domain method. Furthermore, the method accounts for diffuse multipath components (DMC) in the total absorption rate by considering the reverberation time of the investigated room, which describes all the losses in a complex indoor environment. The advantage of the proposed method is that it allows discarding the computational burden because it does not use any discretizations. Results show good agreement between measurement and computation at 2.8 GHz, as long as the plane wave assumption is valid, that is, at large distances from the transmitter. Relative deviations of 0.71% and 4% have been obtained for far-field scenarios, and 77.5% for the near field-scenario. The contribution of the DMC in the total absorption rate is also quantified here, which has never been investigated before. It is found that the DMC may represent an important part of the total absorption rate; its contribution may reach up to 90% for certain scenarios in an indoor environment.

  10. Minimal-SAR RF pulse optimization for parallel transmission in MRI.

    PubMed

    Liu, Yinan; Ji, Jim X

    2008-01-01

    Parallel transmission is an emerging technique to achieve multi-dimensional spatially selective or modulated excitation in Magnetic Resonance Imaging (MRI). Minimizing Specific Absorption Ratio (SAR) is a critical issue in this technique for radio frequency power absorption safety. In this paper, we presented an automatic design method to minimize SAR in an optimization framework. The RF pulses and corresponding k-space trajectory are iteratively adjusted. The method is verified using computer simulations of a 4-channel parallel transmission system. The results showed significantly reduction in SAR can be achieved while the quality of the excited pattern is well preserved without enlonging the pulse duration.

  11. SARS: just another viral acronym?

    PubMed

    Broxmeyer, L

    2003-08-01

    Recent observations and experimental evidence have purported that a virus causes SARS, but such viruses have been isolated in only less than half of SARS patients in some studies and virologist Vincent Plummer of Winnipeg's National Microbiology Laboratory found that indeed 1 in 5 perfectly healthy Canadians with a history of recent travel to Asia had the virus. Therefore SARS microbiologic origins remain unclear. Outbreaks of multi-drug resistant (MDR) tuberculosis and the atypical mycobacteria simulate SARS on clinical, radiologic, epidemiologic, and diagnostic laboratory grounds and it is only logical then to include them in the differential to find a definitive cause and cure for SARS.

  12. Simple SAR demonstrator

    NASA Astrophysics Data System (ADS)

    Kulpa, Krzysztof; Misiurewicz, Jacek; Baranowski, Piotr; Wojdołowicz, Grzegorz

    2008-01-01

    In this paper we present a simple SAR radar demonstrator build using commercially available (COTS) components. For the microwave analog front end, a standard police radar microwave head has been used. The Motorola DSP processor board, equipped with ADC and DAC, has been used for generating of modulating signal and for signal acquisition. The raw radar signal (I and Q components) have been recorded on 2.5" HDD. The signal processing has been performed on standard PC computer after copying the recorded data. The aim of constructing simple and relatively cheap demonstrator was to provide the students the real-life unclassified radar signals and motivate them to test and develop various kinds of SAR and ISAR algorithms, including image formation, motion compensation and autofocusing. The simple microwave frontend hardware has a lot of non-idealities, so for obtaining nice SAR image it was necessary to develop the number of correction algorithms at the calibration stage. The SAR demonstrator have been tested using car as a moving platform. The flight tests with a small airborne platform are planned for the summer.

  13. Recursive SAR imaging

    NASA Astrophysics Data System (ADS)

    Moses, Randolph L.; Ash, Joshua N.

    2008-04-01

    We investigate a recursive procedure for synthetic aperture imaging. We consider a concept in which a SAR system persistently interrogates a scene, for example as it flies along or around that scene. In traditional SAR imaging, the radar measurements are processed in blocks, by partitioning the data into a set of non-overlapping or overlapping azimuth angles, then processing each block. We consider a recursive update approach, in which the SAR image is continually updated, as a linear combination of a small number of previous images and a term containing the current radar measurement. We investigate the crossrange sidelobes realized by such an imaging approach. We show that a first-order autoregression of the image gives crossrange sidelobes similar to a rectangular azimuth window, while a third-order autoregression gives sidelobes comparable to those obtained from widely-used windows in block-processing image formation. The computational and memory requirements of the recursive imaging approach are modest - on the order of M • N2 where M is the recursion order (typically <= 3) and N2 is the image size. We compare images obtained from the recursive and block processing techniques, both for a synthetic scene and for X-band SAR measurements from the Gotcha data set.

  14. A comparative numerical study of rotating and stationary RF coils in terms of flip angle and specific absorption rate for 7 T MRI

    NASA Astrophysics Data System (ADS)

    Trakic, A.; Jin, J.; Li, M. Y.; McClymont, D.; Weber, E.; Liu, F.; Crozier, S.

    2013-11-01

    While high-field magnetic resonance imaging promises improved image quality and faster scan time, it is affected by non-uniform flip angle distributions and unsafe specific absorption rate levels within the patient, as a result of the complicated radiofrequency (RF) field - tissue interactions. This numerical study explored the possibility of using a single mechanically rotating RF coil for RF shimming and specific absorption rate management applications at 7 T. In particular, this new approach (with three different RF coil element arrangements) was compared against both an 8-channel parallel coil array and a birdcage volume coil, with and without RF current optimisation. The evaluation was conducted using an in-house developed and validated finite-difference time-domain method in conjunction with a tissue-equivalent human head model. It was found that, without current optimisation, the rotating RF coil method produced a more uniform flip angle distribution and a lower maximum global and local specific absorption rate compared to the 8-channel parallel coil array and birdcage resonator. In addition, due to the large number of degrees of freedom in the form of rotated sensitivity profiles, the rotating RF coil approach exhibited good RF shimming and specific absorption rate management performance. This suggests that the proposed method can be useful in the development of techniques that address contemporary RF issues associated with high-field magnetic resonance imaging.

  15. A comparative numerical study of rotating and stationary RF coils in terms of flip angle and specific absorption rate for 7 T MRI.

    PubMed

    Trakic, A; Jin, J; Li, M Y; McClymont, D; Weber, E; Liu, F; Crozier, S

    2013-11-01

    While high-field magnetic resonance imaging promises improved image quality and faster scan time, it is affected by non-uniform flip angle distributions and unsafe specific absorption rate levels within the patient, as a result of the complicated radiofrequency (RF) field-tissue interactions. This numerical study explored the possibility of using a single mechanically rotating RF coil for RF shimming and specific absorption rate management applications at 7 T. In particular, this new approach (with three different RF coil element arrangements) was compared against both an 8-channel parallel coil array and a birdcage volume coil, with and without RF current optimisation. The evaluation was conducted using an in-house developed and validated finite-difference time-domain method in conjunction with a tissue-equivalent human head model. It was found that, without current optimisation, the rotating RF coil method produced a more uniform flip angle distribution and a lower maximum global and local specific absorption rate compared to the 8-channel parallel coil array and birdcage resonator. In addition, due to the large number of degrees of freedom in the form of rotated sensitivity profiles, the rotating RF coil approach exhibited good RF shimming and specific absorption rate management performance. This suggests that the proposed method can be useful in the development of techniques that address contemporary RF issues associated with high-field magnetic resonance imaging.

  16. Bistatic SAR: Proof of Concept.

    SciTech Connect

    Yocky, David A.; Doren, Neall E.; Bacon, Terry A.; Wahl, Daniel E.; Eichel, Paul H.; Jakowatz, Charles V,; Delaplain, Gilbert G.; Dubbert, Dale F.; Tise, Bertice L.; White, Kyle R.

    2014-10-01

    Typical synthetic aperture RADAR (SAR) imaging employs a co-located RADAR transmitter and receiver. Bistatic SAR imaging separates the transmitter and receiver locations. A bistatic SAR configuration allows for the transmitter and receiver(s) to be in a variety of geometric alignments. Sandia National Laboratories (SNL) / New Mexico proposed the deployment of a ground-based RADAR receiver. This RADAR receiver was coupled with the capability of digitizing and recording the signal collected. SNL proposed the possibility of creating an image of targets the illuminating SAR observes. This document describes the developed hardware, software, bistatic SAR configuration, and its deployment to test the concept of a ground-based bistatic SAR. In the proof-of-concept experiments herein, the RADAR transmitter will be a commercial SAR satellite and the RADAR receiver will be deployed at ground level, observing and capturing RADAR ground/targets illuminated by the satellite system.

  17. SARS in Hospital Emergency Room

    PubMed Central

    Chen, Yee-Chun; Huang, Li-Min; Chan, Chang-Chuan; Su, Chan-Ping; Chang, Ying-Ying; Chen, Mei-Ling; Hung, Chien-Ching; Chen, Wen-Jone; Lin, Fang-Yue; Lee, Yuan-Teh

    2004-01-01

    Thirty-one cases of severe acute respiratory syndrome (SARS) occurred after exposure in the emergency room at the National Taiwan University Hospital. The index patient was linked to an outbreak at a nearby municipal hospital. Three clusters were identified over a 3-week period. The first cluster (5 patients) and the second cluster (14 patients) occurred among patients, family members, and nursing aids. The third cluster (12 patients) occurred exclusively among healthcare workers. Six healthcare workers had close contact with SARS patients. Six others, with different working patterns, indicated that they did not have contact with a SARS patient. Environmental surveys found 9 of 119 samples of inanimate objects to be positive for SARS coronavirus RNA. These observations indicate that although transmission by direct contact with known SARS patients was responsible for most cases, environmental contamination with the SARS coronavirus may have lead to infection among healthcare workers without documented contact with known hospitalized SARS patients. PMID:15200809

  18. Real-time optical processor prototype for remote SAR applications

    NASA Astrophysics Data System (ADS)

    Marchese, Linda; Doucet, Michel; Harnisch, Bernd; Suess, Martin; Bourqui, Pascal; Legros, Mathieu; Desnoyers, Nichola; Guillot, Ludovic; Mercier, Luc; Savard, Maxime; Martel, Anne; Châteauneuf, François; Bergeron, Alain

    2009-09-01

    A Compact Real-Time Optical SAR Processor has been successfully developed and tested. SAR, or Synthetic Aperture Radar, is a powerful tool providing enhanced day and night imaging capabilities. SAR systems typically generate large amounts of information generally in the form of complex data that are difficult to compress. Specifically, for planetary missions and unmanned aerial vehicle (UAV) systems with limited communication data rates this is a clear disadvantage. SAR images are typically processed electronically applying dedicated Fourier transformations. This, however, can also be performed optically in real-time. Indeed, the first SAR images have been optically processed. The optical processor architecture provides inherent parallel computing capabilities that can be used advantageously for the SAR data processing. Onboard SAR image generation would provide local access to processed information paving the way for real-time decision-making. This could eventually benefit navigation strategy and instrument orientation decisions. Moreover, for interplanetary missions, onboard analysis of images could provide important feature identification clues and could help select the appropriate images to be transmitted to Earth, consequently helping bandwidth management. This could ultimately reduce the data throughput requirements and related transmission bandwidth. This paper reviews the design of a compact optical SAR processor prototype that would reduce power, weight, and size requirements and reviews the analysis of SAR image generation using the table-top optical processor. Various SAR processor parameters such as processing capabilities, image quality (point target analysis), weight and size are reviewed. Results of image generation from simulated point targets as well as real satellite-acquired raw data are presented.

  19. A New SAR Image Segmentation Algorithm for the Detection of Target and Shadow Regions

    NASA Astrophysics Data System (ADS)

    Huang, Shiqi; Huang, Wenzhun; Zhang, Ting

    2016-12-01

    The most distinctive characteristic of synthetic aperture radar (SAR) is that it can acquire data under all weather conditions and at all times. However, its coherent imaging mechanism introduces a great deal of speckle noise into SAR images, which makes the segmentation of target and shadow regions in SAR images very difficult. This paper proposes a new SAR image segmentation method based on wavelet decomposition and a constant false alarm rate (WD-CFAR). The WD-CFAR algorithm not only is insensitive to the speckle noise in SAR images but also can segment target and shadow regions simultaneously, and it is also able to effectively segment SAR images with a low signal-to-clutter ratio (SCR). Experiments were performed to assess the performance of the new algorithm on various SAR images. The experimental results show that the proposed method is effective and feasible and possesses good characteristics for general application.

  20. A New SAR Image Segmentation Algorithm for the Detection of Target and Shadow Regions

    PubMed Central

    Huang, Shiqi; Huang, Wenzhun; Zhang, Ting

    2016-01-01

    The most distinctive characteristic of synthetic aperture radar (SAR) is that it can acquire data under all weather conditions and at all times. However, its coherent imaging mechanism introduces a great deal of speckle noise into SAR images, which makes the segmentation of target and shadow regions in SAR images very difficult. This paper proposes a new SAR image segmentation method based on wavelet decomposition and a constant false alarm rate (WD-CFAR). The WD-CFAR algorithm not only is insensitive to the speckle noise in SAR images but also can segment target and shadow regions simultaneously, and it is also able to effectively segment SAR images with a low signal-to-clutter ratio (SCR). Experiments were performed to assess the performance of the new algorithm on various SAR images. The experimental results show that the proposed method is effective and feasible and possesses good characteristics for general application. PMID:27924935

  1. A New SAR Image Segmentation Algorithm for the Detection of Target and Shadow Regions.

    PubMed

    Huang, Shiqi; Huang, Wenzhun; Zhang, Ting

    2016-12-07

    The most distinctive characteristic of synthetic aperture radar (SAR) is that it can acquire data under all weather conditions and at all times. However, its coherent imaging mechanism introduces a great deal of speckle noise into SAR images, which makes the segmentation of target and shadow regions in SAR images very difficult. This paper proposes a new SAR image segmentation method based on wavelet decomposition and a constant false alarm rate (WD-CFAR). The WD-CFAR algorithm not only is insensitive to the speckle noise in SAR images but also can segment target and shadow regions simultaneously, and it is also able to effectively segment SAR images with a low signal-to-clutter ratio (SCR). Experiments were performed to assess the performance of the new algorithm on various SAR images. The experimental results show that the proposed method is effective and feasible and possesses good characteristics for general application.

  2. Initial analysis of SAR from a cell phone inside a vehicle by numerical computation.

    PubMed

    Anzaldi, Gabriel; Silva, Ferran; Fernández, Mireya; Quílez, Marcos; Riu, Pere J

    2007-05-01

    The purpose of this paper is to analyze the influence of the metallic structures of a realistic car body frame on the specific absorption rate (SAR) produced by a cell phone when a complete human body model is placed at different locations inside the vehicle, and to identify the relevant parameters responsible for these changes. The modeling and analysis of the whole system was conducted by means of computer simulations based on the full wave finite-difference time-domain (FDTD) numerical method. The excitation considered was an 835 MHz lambda/2 dipole located as a hands-free communication device or as a hand-held portable system. We compared the SAR at different planes on the human model, placed inside the vehicle with respect to the free space situation. The presence of the car body frame significantly changes the SAR distributions, especially when the dipole is far from the body. Although the results are not conclusive on this point, this change in SAR distribution is not likely to produce an increase above the limits in current guidelines for partial body exposure, but may be significant for whole-body exposure. The most relevant change found was the change in the impedance of the dipole, affecting the radiated power. A complementary result from the electromagnetic computations performed is the change in the electromagnetic field distribution inside a vehicle when human bodies are present. The whole vehicle model has been optimized to provide accurate results for sources placed inside the vehicle, while keeping low requirements for computer storage and simulation time.

  3. Very High Resolution SAR and Multichannel SAR/MTI

    DTIC Science & Technology

    2006-09-01

    single channel SAR system: • Detection outside the clutter bandwidth • Chirp slope analysis • Chirp filter bank • MTI via multilook images (change...53343 Wachtberg, Germany berens@fgan.de ABSTRACT SAR is widely used today in earth observation and is a potential means for military surveillance...However, systems only operating in the basic SAR mode will be superseded by new developments which fulfil much more user demands. Highest resolution

  4. SAR based adaptive GMTI

    NASA Astrophysics Data System (ADS)

    Vu, Duc; Guo, Bin; Xu, Luzhou; Li, Jian

    2010-04-01

    We consider ground moving target indication (GMTI) and target velocity estimation based on multi-channel synthetic aperture radar (SAR) images. Via forming velocity versus cross-range images, we show that small moving targets can be detected even in the presence of strong stationary ground clutter. Moreover, the velocities of the moving targets can be estimated, and the misplaced moving targets can be placed back to their original locations based on the estimated velocities. Adaptive beamforming techniques, including Capon and generalizedlikelihood ratio test (GLRT), are used to form velocity versus cross-range images for each range bin of interest. The velocity estimation ambiguities caused by the multi-channel array geometry are analyzed. We also demonstrate the effectiveness of our approaches using the Air Force Research Laboratory (AFRL) publicly-released Gotcha SAR based GMTI data set.

  5. Aseismic events in Southern California: Detection with InSAR

    NASA Astrophysics Data System (ADS)

    Lohman, R. B.; McGuire, J. J.; Lundgren, P.

    2007-05-01

    Aseismic slow slip events are usually studied using data types that have a dense temporal sampling rate, such as continuous GPS or tremor analysis using seismic data. However, even the sparser temporal coverage of InSAR data can further our understanding of these events in three significant ways - First, in areas where aseismic transients have been detected on geodetic arrays, InSAR may be able to provide a spatially denser image of the extent and magnitude of deformation. Second, InSAR observations are complementary to GPS because of the differing sensitivities to horizontal and vertical motions. Thirdly, in areas with no ground-based geodetic instrumentation, InSAR can be used in survey mode to detect deformation signals that are not associated with any observed seismicity. The temporal constraints on such signals may not be tight enough to allow for dynamics models of how aseismic transients occur, but InSAR-only detections can improve our understanding of the spatial extent of these types of events and can also identify key areas for future instrumentation and observation. Here, I summarize some of the contributions of InSAR observations of slow slip events, including data spanning the 2005 Obsidian Buttes swam in the Salton Trough, CA, and InSAR time-series results for the Salton Trough using both traditional interferometry and the persistent scatterer method.

  6. Circular SAR GMTI

    NASA Astrophysics Data System (ADS)

    Page, Douglas; Owirka, Gregory; Nichols, Howard; Scarborough, Steven

    2014-06-01

    We describe techniques for improving ground moving target indication (GMTI) performance in multi-channel synthetic aperture radar (SAR) systems. Our approach employs a combination of moving reference processing (MRP) to compensate for defocus of moving target SAR responses and space-time adaptive processing (STAP) to mitigate the effects of strong clutter interference. Using simulated moving target and clutter returns, we demonstrate focusing of the target return using MRP, and discuss the effect of MRP on the clutter response. We also describe formation of adaptive degrees of freedom (DOFs) for STAP filtering of MRP processed data. For the simulated moving target in clutter example, we demonstrate improvement in the signal to interference plus noise (SINR) loss compared to more standard algorithm configurations. In addition to MRP and STAP, the use of tracker feedback, false alarm mitigation, and parameter estimation techniques are also described. A change detection approach for reducing false alarms from clutter discretes is outlined, and processing of a measured data coherent processing interval (CPI) from a continuously orbiting platform is described. The results demonstrate detection and geolocation of a high-value target under track. The endoclutter target is not clearly visible in single-channel SAR chips centered on the GMTI track prediction. Detections are compared to truth data before and after geolocation using measured angle of arrival (AOA).

  7. Mixed jamming method for SAR

    NASA Astrophysics Data System (ADS)

    Zhao, Hong-feng; Zhang, Peng; Wang, Yong-sheng

    2007-11-01

    The mixed jamming method of synthetic aperture radar is analyzed and discussed. The methods of active noise and deception jamming and the signal model of transmitting is described. The raw echo signal of SAR and the model of jammed echo signal are expatiated, the characteristic of SAR and the evaluating method of jamming effect are established. Finally, the mixed jamming imaging of SAR is simulated.

  8. Wetland InSAR

    NASA Astrophysics Data System (ADS)

    Wdowinski, S.; Kim, S.; Amelung, F.; Dixon, T.

    2006-12-01

    Wetlands are transition zones where the flow of water, the nutrient cycling, and the sun energy meet to produce a unique and very productive ecosystem. They provide critical habitat for a wide variety of plant and animal species, including the larval stages of many ocean fish. Wetlands also have a valuable economical importance, as they filter nutrients and pollutants from fresh water used by human and provide aquatic habitats for outdoor recreation, tourism, and fishing. Globally, many such regions are under severe environmental stress, mainly from urban development, pollution, and rising sea level. However, there is increasing recognition of the importance of these habitats, and mitigation and restoration activities have begun in a few regions. A key element in wetlands conservation, management, and restoration involves monitoring its hydrologic system, as the entire ecosystem depends on its water supply. Heretofore, hydrologic monitoring of wetlands are conducted by stage (water level) stations, which provide good temporal resolution, but suffer from poor spatial resolution, as stage station are typically distributed several, or even tens of kilometers, from one another. Wetland application of InSAR provides the needed high spatial resolution hydrological observations, complementing the high temporal resolution terrestrial observations. Although conventional wisdom suggests that interferometry does not work in vegetated areas, several studies have shown that both L- and C-band interferograms with short acquisition intervals (1-105 days) can maintain excellent coherence over wetlands. In this study we explore the usage of InSAR for detecting water level changes in various wetland environments around the world, including the Everglades (south Florida), Louisiana Coast (southern US), Chesapeake Bay (eastern US), Pantanal (Brazil), Okavango Delta (Botswana), and Lena Delta (Siberia). Our main study area is the Everglades wetland (south Florida), which is covered by

  9. SAR Educational Resources From ASF

    NASA Astrophysics Data System (ADS)

    Gens, R.

    2006-12-01

    In parallel with developing software tools specifically for SAR data, the Alaska Satellite Facility (ASF) has a long history of supporting users in the use of the tools and the data. Over the years a number of educational resources have been developed as well. ASF distributes a number of educational CDs (Glacier Power, Dynamic Planet, and Ends of the Earth) that cover a wide range of imagery and applications. In addition, an extensive and frequently updated SAR bibliograpy is made available to users through the ASF website. Summer courses in SAR/InSAR and its applications are offered for credit and are being well received by the user community. The summer courses allow users to get a complete overview about SAR and InSAR as well as all the relevant techniques within an intense two week time frame. In order to explain the various processing steps in a Range-Doppler SAR Processor in detail the SAR Training Processor (STP) has been developed. This enhanced debugging mode of the fully functional, regular SAR processor allows the user to save all the intermediate products and have full control over all processing steps and parameters. This way, the user can evaluate the results of omitting a processing step or changing Doppler parameters. For the future, tailor made offsite training courses and workshops are planned. Updates on these can be found at http://www.asf.alaska.edu/educational/index.html.

  10. Monomeric C-phycocyanin at room temperature and 77 K. Resolution of the absorption and fluorescence spectra of the individual chromophores and the energy-transfer rate constants

    SciTech Connect

    Debreczeny, M.P.; Sauer, K. Univ. of California, Berkeley, CA ); Zhou, J.; Bryant, D.A. )

    1993-09-23

    At both room temperature (RT) and 77 K, the absorption and fluorescence spectra of the three individual chromophore types ([alpha][sub 84], [beta][sub 84], and [beta][sub 155]) found in monomeric C-phycocyanin ([alpha][sup PC][beta][sup PC]), isolated from the cyanobacterium Synechococcus sp. PCC 7002, were resolved along with the rates of energy transfer between the chromophores. The cpcB/C155S mutant, whose PC is missing the [beta][sub 155] chromophore, was useful in effecting this resolution. At RT, the single broad peak in the visible region of the absorption spectrum of ([alpha][sup PC][beta][sup PC]) was resolved into its three-component spectra by comparing the steady-state absorption spectra of the isolated wild-type [alpha] subunit of PC ([alpha][sup PC]) (containing only the [alpha][sub 84] chromophore) with those of the monomeric PCs isolated from the mutant strain ([alpha][sup PC][beta]*) and the wild-type strain ([alpha][sup PC][beta][sup PC]). At 77 K, the visible region of the absorption spectrum of ([alpha][sup PC][beta][sup PC]) splits into two peaks. This partial resolution at 77 K of the chromophore spectra of ([alpha][sup PC][beta][sup PC]) when compared with the 77 K absorption spectra of [alpha][sup PC], [beta][sup PC], and ([alpha][sup PC][beta]*) provided a confirmation of our RT assignments of the chromophore absorption spectra. 38 refs., 9 figs., 6 tabs.

  11. SAR and thermal response effects of a two-arm Archimedean spiral coil in a magnetic induction sensor on a human head.

    PubMed

    Zhang, Ziyi; Liu, Peiguo; Zhou, Dongming; Zhang, Liang; Ding, Liang

    2015-01-01

    This study investigates the radiation safety of a newly designed magnetic induction sensor. This novel magnetic induction sensor uses a two-arm Archimedean spiral coil (TAASC) as the exciter. A human head model with a real anatomical structure was used to calculate the specific absorption rate (SAR) and temperature change. Computer Simulation Technology (CST) was used to determine the values of the peak 10-g SAR under different operating parameters (current, frequency, horizontal distance between the excitation coil and the receiver coil, vertical distance between the top of the head model and the XOY plane, position of excitation coil, and volume of hemorrhage). Then, the highest response for the SAR and temperature rise was determined. The results showed that this new magnetic induction sensor is safe in the initial state; for safety reasons, the TAASC current should not exceed 4 A. The scalp tissue absorbed most of the electromagnetic energy. The TAASC's SAR/thermal performance was close to that of the circular coil.

  12. Bistatic SAR: Imagery & Image Products.

    SciTech Connect

    Yocky, David A.; Wahl, Daniel E.; Jakowatz, Charles V,

    2014-10-01

    While typical SAR imaging employs a co-located (monostatic) RADAR transmitter and receiver, bistatic SAR imaging separates the transmitter and receiver locations. The transmitter and receiver geometry determines if the scattered signal is back scatter, forward scatter, or side scatter. The monostatic SAR image is backscatter. Therefore, depending on the transmitter/receiver collection geometry, the captured imagery may be quite different that that sensed at the monostatic SAR. This document presents imagery and image products formed from captured signals during the validation stage of the bistatic SAR research. Image quality and image characteristics are discussed first. Then image products such as two-color multi-view (2CMV) and coherent change detection (CCD) are presented.

  13. SARS in Three Categories of Hospital Workers, Hong Kong

    PubMed Central

    Yang, Xilin; Leung, Ping-Chung; Chan, Louis; Wong, Eliza; Fong, Carmen; Tsui, Hi-Yi

    2004-01-01

    We analyzed attack rates for severe acute respiratory syndrome (SARS) in three categories of hospital workers (nurses, nonmedical support staff, and other technical or medical staff) in all public hospitals in Hong Kong that had admitted SARS patients. Of 16 such hospitals, 14 had cases. The overall attack rate was 1.20%. Nonmedical support staff had the highest attack rate (2.73%). The odds ratios of group nonmedical support staff versus those of nurses and of nonmedical support staff versus other technical or medical staff were 2.30 (p < 0.001) and 9.78 (p < 0.001), respectively. The number of affected staff and attack rates were significantly correlated with the number of SARS patients admitted (r = 0.914 and 0.686, respectively). Affected patients were concentrated in three hospitals and in the earlier phase of the epidemic. Cleaning and clerical staff on hospital wards were at a much higher risk. PMID:15496240

  14. Neuromusculoskeletal disorders following SARS: a case series

    PubMed Central

    Stainsby, Brynne; Howitt, Scott; Porr, Jason

    2011-01-01

    Objective: To detail the presentation of three health care workers diagnosed with sudden acute respiratory syndrome (SARS) who later presented to a CMCC teaching clinic with neuromusculoskeletal sequelae and underwent conservative treatments. This case series aims to inform practitioners of the potential pathogenesis of these neuromuscular complaints and describes their treatment in a chiropractic practice. Clinical Features: Three patients presented with a variety of neurological, muscular and joint findings. Conservative treatment was aimed at decreasing hypertonic muscles, increasing joint mobility, and improving ability to perform activities of daily living. Intervention and Outcome: The conservative treatment approach utilized in these cases involved spinal manipulative therapy, soft tissue therapy, modalities, and rehabilitation. Outcome measures included subjective pain ratings, disability indices, and return to work. Conclusion: Three patients previously diagnosed with SARS presented with neuromusculoskeletal complaints and subjectively experienced intermittent relief of pain and improvement in disability status after conservative treatments. PMID:21403780

  15. Addition of sodium bicarbonate to either 1 or 2 feedings of colostrum replacer: effect on uptake and rate of absorption of immunoglobulin G in neonatal calves.

    PubMed

    Cabral, R G; Kent, E J; Haines, D M; Erickson, P S

    2012-06-01

    Forty Holstein dairy calves were blocked by birth date and sex, and randomly assigned to 1 of 4 treatments within each block to elucidate the effect of feeding regimen and sodium bicarbonate (NaHCO₃) supplementation on absorption of IgG from colostrum replacer (CR). Calves received CR containing 191.4 g of IgG fed either in 1 feeding at 0 h (within 45 min of birth), with or without 30 g of NaHCO₃, or in 2 feedings (127.6 g of IgG at 0 h, with or without 20 g of NaHCO₃, and 63.8 g of IgG at 6 h, with or without 10 g of NaHCO₃). The treatments were (1) 1 feeding of CR+0 g of NaHCO₃; (2) 1 feeding of CR+30 g of NaHCO₃; (3) 2 feedings of CR+0 g of NaHCO₃; and (4) 2 feedings of CR+30 g total of NaHCO₃. Only calves born with no dystocia were used on this study. Blood samples were taken at 0, 6, 12, 18, and 24h postpartum and were analyzed for IgG using a radial immunoassay. Results indicated that, individually, feeding regimen and NaHCO₃ treatments had no effect. However, the interaction was significant for 24-h IgG and area under the curve, and showed a trend for apparent efficiency of absorption. Absorption rate data indicated that, for calves fed within 45 min of birth, most IgG absorption occurred in the first 6 h after birth. From 6 to 12 h postpartum, IgG absorption started to decrease; however, IgG absorption remained higher for calves fed in a single feeding than in 2 feedings. These data indicated that NaHCO₃ may increase IgG absorption when calves are fed colostrum in a single feeding but is not beneficial when colostrum is fed in 2 feedings.

  16. Rate-controlled rectal absorption enhancement of cefoxitin by co-administration of sodium salicylate or sodium octanoate in healthy volunteers.

    PubMed Central

    Van Hoogdalem, E J; Wackwitz, A T; De Boer, A G; Cohen, A F; Breimer, D D

    1989-01-01

    1. The effects of sodium octanoate and sodium salicylate on the rectal absorption of cefoxitin were investigated in healthy volunteers. Drug solutions were given either as a bolus or as a zero-order infusion. 2. On rectal infusion sodium octanoate and sodium salicylate both enhanced mean cefoxitin bioavailability (+/- s.d.) from 5.0 +/- 1.2% to 9.1 +/- 1.3% and 9.2 +/- 1.5%, respectively. After rectal bolus delivery octanoate increased the mean cefoxitin bioavailability from 7 +/- 3% to 17 +/- 3%, whereas bolus salicylate did not produce a statistically significant effect. All formulations were well tolerated by the volunteers. 3. It is concluded that both octanoate and salicylate are capable of enhancing rectal cefoxitin absorption in man; rate of delivery seems to be an important factor. PMID:2706190

  17. The Alaska SAR processor

    NASA Technical Reports Server (NTRS)

    Carande, R. E.; Charny, B.

    1988-01-01

    The Alaska SAR processor was designed to process over 200 100 km x 100 km (Seasat like) frames per day from the raw SAR data, at a ground resolution of 30 m x 30 m from ERS-1, J-ERS-1, and Radarsat. The near real time processor is a set of custom hardware modules operating in a pipelined architecture, controlled by a general purpose computer. Input to the processor is provided from a high density digital cassette recording of the raw data stream as received by the ground station. A two pass processing is performed. During the first pass clutter-lock and auto-focus measurements are made. The second pass uses the results to accomplish final image formation which is recorded on a high density digital cassette. The processing algorithm uses fast correlation techniques for range and azimuth compression. Radiometric compensation, interpolation and deskewing is also performed by the processor. The standard product of the ASP is a high resolution four-look image, with a low resolution (100 to 200 m) many look image provided simultaneously.

  18. Health Council of The Netherlands: no need to change from SAR to time-temperature relation in electromagnetic fields exposure limits.

    PubMed

    van Rhoon, Gerard C; Aleman, André; Kelfkens, Gert; Kromhout, Hans; Van Leeuwen, Flora E; Savelkoul, Huub F J; Wadman, Wytse J; Van De Weerdt, Rik D H J; Zwamborn, A Peter M; Van Rongen, Eric

    2011-01-01

    The Health Council of the Netherlands (HCN) and other organisations hold the basic assumption that induced electric current and the generation and absorption of heat in biological material caused by radiofrequency electromagnetic fields are the only causal effects with possible adverse consequences for human health that have been scientifically established to date. Hence, the exposure guidelines for the 10 MHz-10 GHz frequency range are based on avoiding adverse effects of increased temperatures that may occur of the entire human body at a specific absorption rate (SAR) level above 4 W/kg. During the workshop on Thermal Aspects of Radio Frequency Exposure on 11-12 January 2010 in Gaithersburg, Maryland, USA, the question was raised whether there would be a practical advantage in shifting from expressing the exposure limits in SAR to expressing them in terms of a maximum allowable temperature increase. This would mean defining adverse time-temperature thresholds. In this paper, the HCN discusses the need for this, considering six points: consistency, applicability, quantification, causality, comprehensibility and acceptability. The HCN concludes that it seems unlikely that a change of dosimetric quantity will help us forward in the discussion on the scientific controversies regarding the existence or non-existence of non-thermal effects in humans following long duration, low intensity exposure to electromagnetic fields. Therefore, the HCN favours maintaining the current approach of basic restrictions and reference levels being expressed as SAR and in V/m or µT, respectively.

  19. InSAR Monitoring of Landslides using RADARSAT and Alos

    NASA Astrophysics Data System (ADS)

    Singhroy, V.; Pierre-Jean, A.; Pavlic, G.

    2009-05-01

    We present the results of InSAR monitoring of several landslides using RADARDAT, and ALOS satellites. InSAR techniques are increasingly being used in slope stability assessment. Our research has shown that differential InSAR and coherent target monitoring techniques using field corner reflectors are useful to monitor landslide activity along strategic transportation and energy corridors. The Mackenzie Valley in northern Canada is experiencing one of the highest rates on mean annual air temperature for any region in Canada, thereby triggering melting in the permafrost, which results in active layer detachment slides. There are approximately 2000 landslides along the proposed Mackenzie Valley pipeline route. In addition, the Trans Canada Highway in the Canadian Rockies are affected by several rock avalanches and slow retrogressive slides. The ALOS PALSAR InSAR results show that we can observe deformation on both vegetated and exposed rock areas on the Little Smokey slide and the Frank Slide. RADARSAT-1 InSAR images indicate the different level of activity of the slopes (large and small) during different periods of the year. RADARSAT-2 is providing the high resolution rapid revisit capabilities needed to continuously monitor these active slopes along Canadian strategic energy and transportation corridors. The information produced by our InSAR activity maps on various landslides are used to realign the pipeline route in sensitive permafrost areas, and to install slope stability measures along the Trans-Canada and Provincial Highways. Using these different satellites we are able to develop guidelines for more reliable uses of these SAR missions Keywords: InSAR, landslides, RADARSAT, ALOS .

  20. Anatomy of a SAR impulse response.

    SciTech Connect

    Doerry, Armin Walter

    2007-08-01

    A principal measure of Synthetic Aperture Radar (SAR) image quality is the manifestation in the SAR image of a spatial impulse, that is, the SAR's Impulse Response (IPR). IPR requirements direct certain design decisions in a SAR. Anomalies in the IPR can point to specific anomalous behavior in the radar's hardware and/or software.

  1. Processor architecture for airborne SAR systems

    NASA Technical Reports Server (NTRS)

    Glass, C. M.

    1983-01-01

    Digital processors for spaceborne imaging radars and application of the technology developed for airborne SAR systems are considered. Transferring algorithms and implementation techniques from airborne to spaceborne SAR processors offers obvious advantages. The following topics are discussed: (1) a quantification of the differences in processing algorithms for airborne and spaceborne SARs; and (2) an overview of three processors for airborne SAR systems.

  2. Dynamic absorption and scattering of water and hydrogel during high-repetition-rate (>100 MHz) burst-mode ultrafast-pulse laser ablation

    PubMed Central

    Qian, Zuoming; Covarrubias, Andrés; Grindal, Alexander W.; Akens, Margarete K.; Lilge, Lothar; Marjoribanks, Robin S.

    2016-01-01

    High-repetition-rate burst-mode ultrafast-laser ablation and disruption of biological tissues depends on interaction of each pulse with the sample, but under those particular conditions which persist from previous pulses. This work characterizes and compares the dynamics of absorption and scattering of a 133-MHz repetition-rate, burst-mode ultrafast-pulse laser, in agar hydrogel targets and distilled water. The differences in energy partition are quantified, pulse-by-pulse, using a time-resolving integrating-sphere-based device. These measurements reveal that high-repetition-rate burst-mode ultrafast-laser ablation is a highly dynamical process affected by the persistence of ionization, dissipation of plasma plume, neutral material flow, tissue tensile strength, and the hydrodynamic oscillation of cavitation bubbles. PMID:27375948

  3. [A study of absorption of energy of the extremely high frequency electromagnetic radiation in the rat skin by various dosimetric methods and approaches].

    PubMed

    Gapeev, A B; Sokolov, P A; Chemeris, N K

    2002-01-01

    Using experimental and theoretical methods of dosimetry, the energy absorption of extremely high-frequency electromagnetic radiation (EHF EMR) in the skin of laboratory rats was analyzed. Specific absorption rate (SAR) in the skin was determined on the basis of both microthermometric measurements of initial rates of temperature rise in rat skin induced by the exposure and microcalorimetric measurements of specific heat of the skin. Theoretical calculations of SAR in the skin were performed with consideration for dielectric parameters of rat skin obtained from the measurements of the standing wave ratio upon reflection of electromagnetic waves from the skin surface and for the effective area of stationary overheating measured by infrared thermography. A numerical method was developed to determine electromagnetic wave energy reflected, absorbed, and transmitted in the model of flat layers. The algorithm of the method was realized in a computer program and used to calculate SAR in the skin on the basis of the complex dielectric constant of rat skin. The SAR values obtained from experimental measurements, theoretical calculations and numerical analysis are in good mutual correspondence and make about 220-280 W/kg at a frequency of 42.25 GHz and a power of 20 mW at the radiator output. The results obtained can be used for dosimetric supply of biomedical experiments on studying the physicochemical mechanisms of the biological effects of EHF EMR.

  4. Determination of drug absorption rate in time-variant disposition by direct deconvolution using beta clearance correction and end-constrained non-parametric regression.

    PubMed

    Neelakantan, S; Veng-Pedersen, P

    2005-11-01

    A novel numerical deconvolution method is presented that enables the estimation of drug absorption rates under time-variant disposition conditions. The method involves two components. (1) A disposition decomposition-recomposition (DDR) enabling exact changes in the unit impulse response (UIR) to be constructed based on centrally based clearance changes iteratively determined. (2) A non-parametric, end-constrained cubic spline (ECS) input response function estimated by cross-validation. The proposed DDR-ECS method compensates for disposition changes between the test and the reference administrations by using a "beta" clearance correction based on DDR analysis. The representation of the input response by the ECS method takes into consideration the complex absorption process and also ensures physiologically realistic approximations of the response. The stability of the new method to noisy data was evaluated by comprehensive simulations that considered different UIRs, various input functions, clearance changes and a novel scaling of the input function that includes the "flip-flop" absorption phenomena. The simulated input response was also analysed by two other methods and all three methods were compared for their relative performances. The DDR-ECS method provides better estimation of the input profile under significant clearance changes but tends to overestimate the input when there were only small changes in the clearance.

  5. Synthetic Aperture Radar (SAR) data processing

    NASA Technical Reports Server (NTRS)

    Beckner, F. L.; Ahr, H. A.; Ausherman, D. A.; Cutrona, L. J.; Francisco, S.; Harrison, R. E.; Heuser, J. S.; Jordan, R. L.; Justus, J.; Manning, B.

    1978-01-01

    The available and optimal methods for generating SAR imagery for NASA applications were identified. The SAR image quality and data processing requirements associated with these applications were studied. Mathematical operations and algorithms required to process sensor data into SAR imagery were defined. The architecture of SAR image formation processors was discussed, and technology necessary to implement the SAR data processors used in both general purpose and dedicated imaging systems was addressed.

  6. Prevalence of psychiatric morbidity and psychological adaptation of the nurses in a structured SARS caring unit during outbreak: a prospective and periodic assessment study in Taiwan.

    PubMed

    Su, Tung-Ping; Lien, Te-Cheng; Yang, Chih-Yi; Su, Yiet Ling; Wang, Jia-Horng; Tsai, Sing-Ling; Yin, Jeo-Chen

    2007-01-01

    To assess the rapidly changing psychological status of nurses during the acute phase of the 2003 SARS outbreak, we conducted a prospective and periodic evaluation of psychiatric morbidity and psychological adaptation among nurses in SARS units and non-SARS units. Nurse participants were from two SARS units (regular SARS [N=44] and SARS ICU [N=26]) and two non-SARS units (Neurology [N=15] and CCU [N=17]). Participants periodically self-evaluated their depression, anxiety, post-traumatic stress symptoms, sleep disturbance, attitude towards SARS and family support. Results showed that depression (38.5% vs. 3.1%) and insomnia (37% vs. 9.7%) were, respectively, greater in the SARS unit nurses than the non-SARS unit nurses. No difference between these two groups was found in the prevalence of post-traumatic stress symptoms (33% vs. 18.7%), yet, three unit subjects (SARS ICU, SARS regular and Neurology) had significantly higher rate than those in CCU (29.7% vs. 11.8%, respectively) (p<0.05). For the SARS unit nurses, significant reduction in mood ratings, insomnia rate and perceived negative feelings as well as increasing knowledge and understanding of SARS at the end of the study (all p<0.001) indicated that a gradual psychological adaptation had occurred. The adjustment of nurses in the more structured SARS ICU environment, where nurses care for even more severely ill patients, may have been as good or better than that of nurses in the regular SARS unit. Occurrence of psychiatric symptoms was linked to direct exposure to SARS patient care, previous mood disorder history, younger age and perceived negative feelings. Positive coping attitude and strong social and family support may have protected against acute stress. In conclusion, the psychological impact on the caring staffs facing future bio-disaster will be minimized with lowered risk factors and a safer and more structured work environment.

  7. Initial Point Selection and Validation in PS-InSAR Using Integrated Amplitude Calibration

    DTIC Science & Technology

    2005-07-25

    in PS-InSAR analysis can be summarized as: 1) oversampling with a factor 2 to avoid aliasing, 2) SAR image coregistration to the same radar grid, 3...are not caused by coregistration precision, which is for both methods around 0.1 pixel. The higher detection rate of the calibration validation

  8. The effects of receiving room dimensions and absorption in the measurement of impact insulation class (IIC) rating

    NASA Astrophysics Data System (ADS)

    Su, Rose Mary; Tocci, Gregory

    2005-09-01

    The measurement of the Impact Insulation Class (IIC) rating of any floor/ceiling construction requires the use of a certified laboratory space. In a recent investigation into the IIC rating of a new floor system, several tests were conducted in a certified laboratory. In many tests, the IIC rating was controlled by the 100-Hz 1/3-octave frequency band, despite changes in the floor/ceiling construction. The base floor/ceiling construction included a wood structural floor on open-web wood joists and a GWB ceiling below. This paper will investigate the possibility that room resonances influenced the IIC ratings of the several floor systems tested. These data will be compared with IIC data collected for the same floor construction with the GWB ceiling removed. The removal of the GWB ceiling increased the receiver room volume and exposed the glass fiber insulation to the receiver room, thus eliminating the control of the 100-Hz 1/3-octave band over the IIC rating.

  9. Transdermal absorption of (-)-linalool induces autonomic deactivation but has no impact on ratings of well-being in humans.

    PubMed

    Heuberger, Eva; Redhammer, Sandra; Buchbauer, Gerhard

    2004-10-01

    Essential lavender oil has a long tradition as a mild sedative in herbal medicine. Relaxing effects after inhalation have also been demonstrated for one of its main constituents, (-)-linalool. The aim of the present investigation was to determine the effects of this monoterpenoid alcohol on human physiological parameters (blood oxygen saturation, breathing rate, eye-blink rate, pulse rate, skin conductance, skin temperature, surface electromyogram as well as systolic and diastolic blood pressure) and assessments of subjective well-being. (-)-Linalool was applied to 14 healthy subjects by percutaneous administration. Inhalation of the fragrance was prevented by means of breathing masks. (-)-Linalool induced deactivation with respect to physiology, that is, a decrease of systolic blood pressure and a smaller decrease of skin temperature, compared to a corresponding control group receiving a placebo, but had no effects on subjective evaluation of well-being.

  10. SAR imaging - Seeing the unseen

    NASA Technical Reports Server (NTRS)

    Kobrick, M.

    1982-01-01

    The functional abilities and operations of synthetic aperture radar (SAR) are described. SAR employs long wavelength radio waves in bursts, imaging a target by 'listening' to the small frequency changes that result from the Doppler shift due to the relative motion of the imaging craft and the motions of the target. The time delay of the signal return allows a determination of the location of the target, leading to the build up of a two-dimensional image. The uses of both Doppler shifts and time delay enable detailed imagery which is independent of distance. The synthetic aperture part of the name of SAR derives from the beaming of multiple pulses, which result in a picture that is effectively the same as using a large antenna. Mechanisms contributing to the fineness of SAR images are outlined.

  11. TerraSAR-X mission

    NASA Astrophysics Data System (ADS)

    Werninghaus, Rolf

    2004-01-01

    The TerraSAR-X is a German national SAR- satellite system for scientific and commercial applications. It is the continuation of the scientifically and technologically successful radar missions X-SAR (1994) and SRTM (2000) and will bring the national technology developments DESA and TOPAS into operational use. The space segment of TerraSAR-X is an advanced high-resolution X-Band radar satellite. The system design is based on a sound market analysis performed by Infoterra. The TerraSAR-X features an advanced high-resolution X-Band Synthetic Aperture Radar based on the active phased array technology which allows the operation in Spotlight-, Stripmap- and ScanSAR Mode with various polarizations. It combines the ability to acquire high resolution images for detailed analysis as well as wide swath images for overview applications. In addition, experimental modes like the Dual Receive Antenna Mode allow for full-polarimetric imaging as well as along track interferometry, i.e. moving target identification. The Ground Segment is optimized for flexible response to (scientific and commercial) User requests and fast image product turn-around times. The TerraSAR-X mission will serve two main goals. The first goal is to provide the strongly supportive scientific community with multi-mode X-Band SAR data. The broad spectrum of scientific application areas include Hydrology, Geology, Climatology, Oceanography, Environmental Monitoring and Disaster Monitoring as well as Cartography (DEM Generation) and Interferometry. The second goal is the establishment of a commercial EO-market in Europe which is driven by Infoterra. The commercial goal is the development of a sustainable EO-business so that the e.g. follow-on systems can be completely financed by industry from the profit. Due to its commercial potential, the TerraSAR-X project will be implemented based on a public-private partnership with the Astrium GmbH. This paper will describe first the mission objectives as well as the

  12. Focusing of bistatic SAR data

    NASA Astrophysics Data System (ADS)

    Bia, Pietro; Ricci, Nicola; Zonno, Mariantonietta; Nico, Giovanni; Catalao, Joao; Tesauro, Manlio

    2014-10-01

    The problems of simulation of bistatic SAR raw data and focusing are studied. A discrete target simulator is described. The simulator introduces the scene topography and compute the integration time of general bistatic configurations providing a means to derived maps of the range and azimuth spatial resolutions. The problem of focusing of bistatic SAR data acquired in a translational-invariant bistatic configuration is studied by deriving the bistatic Point Target Reference spectrum and presenting an analytical solution for its stationary points.

  13. Normal and Differential SAR Interferometry

    DTIC Science & Technology

    2007-02-01

    Geudtner, B. Schättler, P. Vachon, U. Steinbrecher, J. Holzner, J. Mittermayer , H. Breit, A. Moreira. RADARSAT ScanSAR interferometry. In: Proc.IGARSS’99...IV, Ottawa, Vol. XXXIV, part 4, pp. 470-475 Krieger, G., Wendler, M., Fiedler, H., Mittermayer , J., Moreira, A., 2002. Performance analysis for...bistatic interferometric SAR configurations. In: Proc.IGARSS 2002, Toronto, Canada, vol. 1, pp. 650-652. Krieger, G., Fiedler, H., Mittermayer , J

  14. Normal and Differential SAR Interferometry

    DTIC Science & Technology

    2005-02-01

    Geudtner, B. Schättler, P. Vachon, U. Steinbrecher, J. Holzner, J. Mittermayer , H. Breit, A. Moreira. RADARSAT ScanSAR interferometry. In: Proceedings of...part 4, pp. 470-475 Krieger, G., Wendler, M., Fiedler, H., Mittermayer , J., Moreira, A., 2002. Performance analysis for bistatic interferometric...SAR configurations. In: Proceedings of IGARSS 2002, Toronto, Canada, vol. 1, pp. 650-652. Krieger, G., Fiedler, H., Mittermayer , J., Papathanassiou, K

  15. Evaluation of in vitro release rate and in vivo absorption characteristics of four metoprolol tartrate immediate-release tablet formulations.

    PubMed

    Rekhi, G S; Eddington, N D; Fossler, M J; Schwartz, P; Lesko, L J; Augsburger, L L

    1997-02-01

    The purpose of this investigation was to examine the impact of formulation and process changes on dissolution and bioavailability/bioequivalency of metoprolol tartrate tablets manufactured using a high-shear granulation process. A half-factorial (2(4-1), Res IV) design was undertaken to study the selected formulation and processing variables during scale-up. Levels and ranges for excipients and processing changes studied represented level 2 or greater changes as indicated by the SUPAC-IR Guidance. Blend and tableting properties were evaluated. Changes in sodium starch glycolate and magnesium stearate levels, and the order of addition microcrystalline cellulose (intra- vs. extragranular) were significant only in affecting percent drug released (Q) in 5, 10, and 15 min. Statistical analysis of data showed no significant curvature. No interaction effects were found to be statistically significant. To examine the impact of formulation and processing variables on in vivo absorption, three batches were selected for a bioavailability study based on their dissolution profiles. Subjects received four metoprolol treatments (Lopressor, slow-, medium-, and fast-dissolving formulations) separated by 1 week according to a randomized crossover design. After an overnight fast, subjects were administered one tablet (100 mg), blood samples were collected over 24 hr and plasma samples were analyzed. The formulations were found to be bioequivalent with respect to the log Cmax and log AUC0-infinity. The results of this study suggest that: (i) bioavailability/bioequivalency studies may not be necessary for metoprolol tartrate and perhaps other class 1 drugs after level 2 type changes and (ii) in vitro dissolution tests may be used to show bioequivalence of metoprolol formulations with processing or formulation changes within the specified level 2 ranges for the equipment examined.

  16. Analysis of three-dimensional SAR distributions emitted by mobile phones in an epidemiological perspective.

    PubMed

    Deltour, Isabelle; Wiart, Joe; Taki, Masao; Wake, Kanako; Varsier, Nadège; Mann, Simon; Schüz, Joachim; Cardis, Elisabeth

    2011-12-01

    The three-dimensional distribution of the specific absorption rate of energy (SAR) in phantom models was analysed to detect clusters of mobile phones producing similar spatial deposition of energy in the head. The clusters' characteristics were described from the phones external features, frequency band and communication protocol. Compliance measurements with phones in cheek and tilt positions, and on the left and right side of a physical phantom were used. Phones used the Personal Digital Cellular (PDC), Code division multiple access One (CdmaOne), Global System for Mobile Communications (GSM) and Nordic Mobile Telephony (NMT) communication systems, in the 800, 900, 1500 and 1800 MHz bands. Each phone's measurements were summarised by the half-ellipsoid in which the SAR values were above half the maximum value. Cluster analysis used the Partitioning Around Medoids algorithm. The dissimilarity measure was based on the overlap of the ellipsoids, and the Manhattan distance was used for robustness analysis. Within the 800 MHz frequency band, and in part within the 900 MHz and the 1800 MHz frequency bands, weak clustering was obtained for the handset shape (bar phone, flip with top and flip with central antennas), but only in specific positions (tilt or cheek). On measurements of 120 phones, the three-dimensional distribution of SAR in phantom models did not appear to be related to particular external phone characteristics or measurement characteristics, which could be used for refining the assessment of exposure to radiofrequency energy within the brain in epidemiological studies such as the Interphone.

  17. Comparisons of peak SAR levels in concentric sphere head models of children and adults for irradiation by a dipole at 900 MHz.

    PubMed

    Anderson, Vitas

    2003-10-21

    The aim of this study is to examine the scale and significance of differences in peak specific energy absorption rate (SAR) in the brains of children and adults exposed to radiofrequency emissions from mobile phones. Estimates were obtained by method of multipole analysis of a three layered (scalp/cranium/brain) spherical head exposed to a nearby 0.4 lambda dipole at 900 MHz. A literature review of head parameters that influence SAR induction revealed strong indirect evidence based on total body water content that there are no substantive age-related changes in tissue conductivity after the first year of life. However, it was also found that the thickness of the ear, scalp and cranium do decrease on average with decreasing age, though individual variability within any age group is very high. The model analyses revealed that compared to an average adult, the peak brain 10 g averaged SAR in mean 4, 8, 12 and 16 year olds (yo) is increased by a factor of 1.31, 1.23, 1.15 and 1.07, respectively. However, contrary to the expectations of a recent prominent expert review, the UK Stewart Report, the relatively small scale of these increases does not warrant any special precautionary measures for child mobile phone users since: (a) SAR testing protocols as contained in the CENELEC (2001) standard provide an additional safety margin which ensures that allowable localized SAR limits are not exceeded in the brain; (b) the maximum worst case brain temperature rise (approximately 0.13 to 0.14 degrees C for an average 4 yo) in child users of mobile phones is well within safe levels and normal physiological parameters; and (c) the range of age average increases in children is less than the expected range of variation seen within the adult population.

  18. Receptor-binding domain as a target for developing SARS vaccines.

    PubMed

    Zhu, Xiaojie; Liu, Qi; Du, Lanying; Lu, Lu; Jiang, Shibo

    2013-08-01

    A decade ago, severe acute respiratory syndrome (SARS) coronavirus (SARS-CoV) caused a global pandemic with a mortality rate of 10%. Reports of recent outbreaks of a SARS-like disease caused by Middle East respiratory syndrome coronavirus (MERS-CoV) have raised serious concerns of a possible reemergence of SARS-CoV, either by laboratory escape or the presence of a natural reservoir. Therefore, the development of effective and safe SARS vaccines is still needed. Based on our previous studies, we believe that the receptor-binding domain (RBD) in the S1 subunit of the SARS-CoV spike (S) protein is the most important target for developing a SARS vaccine. In particular, RBD of S protein contains the critical neutralizing domain (CND), which is able to induce highly potent neutralizing antibody response and cross-protection against divergent SARS-CoV strains. Furthermore, a RBD-based subunit vaccine is expected to be safer than other vaccines that may induce Th2-type immunopathology. This review will discuss key advances in the development of RBD-based SARS vaccines and the possibility of using a similar strategy to develop vaccines against MERS-CoV.

  19. SAR changes in a human head model for plane wave exposure (500 - 2500 MHz) and a comparison with IEEE 2005 safety limits.

    PubMed

    Yelkenci, Tanju; Paker, Selcuk

    2008-01-01

    In this paper, external electric field values that are derived from the largest peak average 10 g SAR (Specific Absorption Rate) results in a realistic human head model are compared with current IEEE and ICNIRP reference levels. The head is illuminated by a plane wave source at seven different frequencies ranging from 500 MHz to 2500 MHz, with five different incident directions and three polarizations. Results reveal that the presence of metallic wire spectacles reduces the external electric field levels in the region above 900 MHz. Comparison of derived electric field values shows that the current IEEE and ICNIRP safety limits provide a conservative estimate.

  20. Diffusion coefficients significant in modeling the absorption rate of carbon dioxide into aqueous blends of N-methyldiethanolamine and diethanolamine and of hydrogen sulfide into aqueous N-methyldiethanolamine

    SciTech Connect

    Adams, M.E.; Marshall, T.L.; Rowley, R.L.

    1998-07-01

    Absorption rates of gaseous CO{sub 2} into aqueous blends of N-methyldiethanolamine (MDEA) and diethanolamine (DEA) and of gaseous H{sub 2}S into aqueous MDEA were measured in a quiescent, inverted-tube diffusiometer by monitoring the rate of pressure drop. A numerical model for absorption, diffusion, and reaction of CO{sub 2} and H{sub 2}S in blends of MDEA, DEA, and water was developed. The model was used to regress diffusion coefficients of bicarbonate, carbamate, and MDEAH{sub 2}CO{sub 3} for the case of CO{sub 2} absorption and of bisulfide ion for the case of H{sub 2}S absorption from measured absorption rates. CO{sub 2} absorption rates and diffusion coefficients of bicarbonate, carbamate, and MDEAH{sub 2}CO{sub 3} were obtained at 298.2 K and 318.2 K in aqueous solutions containing 50 mass % total amine at DEA:MDEA mole ratios of 1:20, 1:4, 1L3, and 2:3. H{sub 2}S absorption rates and diffusion coefficients of bisulfide ion were obtained at 298.2 K and 318.2 K in aqueous solutions containing 20, 35, and 50 mass % MDEA.

  1. In vitro hyperthermia with improved colloidal stability and enhanced SAR of magnetic core/shell nanostructures.

    PubMed

    Patil, R M; Thorat, N D; Shete, P B; Otari, S V; Tiwale, B M; Pawar, S H

    2016-02-01

    Magnetic core/shell nanostructures of Fe3O4 nanoparticles coated with oleic acid and betaine-HCl were studied for their possible use in magnetic fluid hyperthermia (MFH). Their colloidal stability and heat induction ability were studied in different media viz. phosphate buffer solution (PBS), saline solution and glucose solution with different physiological conditions and in human serum. The results showed enhanced colloidal stability in these media owing to their high zeta potential values. Heat induction studies showed that specific absorption rates (SAR) of core/shells were 82-94W/g at different pH of PBS and concentrations of NaCl and glucose. Interestingly, core/shells showed 78.45±3.90W/g SAR in human serum. The cytotoxicity of core/shells done on L929 and HeLa cell lines using 3-(4,5-dimethylthiazol-2-yl)2,5-diphenyl tetrazolium bromide and trypan blue dye exclusion assays showed >89% and >80% cell viability for 24 and 48h respectively. Core/shell structures were also found to be very efficient for in vitro MFH on cancer cell line. About 95% cell death was occurred in 90min after hyperthermia treatment. The mechanism of cell death was found to be elevated ROS generation in cells after exposure to core/shells in external magnetic field. This study showed that these core/shells have a great potential to be used in in vivo MFH.

  2. SAR reduction using a single SRR superstrate for a dual-band antenna.

    PubMed

    Rosaline, Imaculate; Singaravelu, Raghavan

    2017-01-01

    A dual-band microstrip antenna operating at GSM 900 and GSM 1800 MHz is designed initially. Then a single split ring resonator (SRR) structure is used as a superstrate for this dual-band antenna. A circular current is induced in the SRR due to the perpendicular plane wave excitation, which in turn leads to an electric excitation coupled to the magnetic resonance. It also exhibits higher order excitations at 0.9 and 1.8 GHz which ultimately resulted in specific absorption rate (SAR) reduction of human head at both the designed frequencies of the antenna. The antenna and the SRR superstrate are printed on a 1.6 mm thick FR-4 substrate of dimension 59.6 × 49.6 mm(2). Analysis of the SRR using the classic waveguide theory approach is discussed. Radiation pattern of the antenna in the presence of SRR superstrate and human head is also discussed. Prototype of the antenna along with the SRR superstrate is fabricated and measured for return loss and radiation pattern. Measurement results fairly agree with the simulated results. A human head phantom is utilized in the calculation of SAR.

  3. Millimeter-wave interferometric SAR and polarimetry

    NASA Astrophysics Data System (ADS)

    Boehmsdorff, Stephan; Essen, Helmut; Schimpf, Hartmuf; Wahlen, Alfred

    1998-07-01

    Using synthetic aperture radars with appropriate signal processing algorithms is a recognized technique for remote sensing applications. A wide spectrum of radar frequencies is used and a high degree of sophistication implies polarimetric and further multichannel approaches. Each frequency band used, exhibits special sensitivities to features of the earth's surface or man-made targets. This is mostly due to the coupling of the electromagnetic waves to backscattering geometries which are related to the radarwavelength. A part of the spectrum which has been covered not very intensely is the millimeterwave region. This may be mostly due to the relatively high atmospheric absorption at millimeterwaves which obstructs the use of such sensors for long range applications. On the other hand for military applications IR-imaging sensors are widely used which suffer even more from adverse transmission properties of the atmosphere. Application of multichannel techniques as polarimetry, multifrequency techniques and interferometry are also done with more ease due to compactness of the hardware and simplicity of processing. As there exist no data which would allow to investigate the potential of multifrequency polarimetric and interferometric mmW-SAR the Millimeterwave Experimental Multifrequency Polarimetric High Resolution Interferometric Imaging System was installed into an aircraft C-160 `Transall' to gather respective data over different land scenarios. The off-line evaluation of the radar data starts with off-line track, calibration and reformatting procedures. Afterwards synthetic aperture processing is applied to these data to generate radar images for co- and cross-polarization at 35 GHz and 94 GHz. As already mentioned above, SAR-processing at millimeterwavelengths requires a considerable lower amount of sophistication in comparison with algorithms applied at lower radar-frequencies. This can mainly be attributed to the short aperture length at mm-wave frequencies

  4. Adapted RF Pulse Design for SAR Reduction in Parallel Excitation with Experimental Verification at 9.4 Tesla

    PubMed Central

    Wu, Xiaoping; Akgün, Can; Vaughan, J. Thomas; Andersen, Peter; Strupp, John; Uğurbil, Kâmil; Van de Moortele, Pierre-François

    2010-01-01

    Parallel excitation holds strong promises to mitigate the impact of large transmit B1 (B1+) distortion at very high magnetic field. Accelerated RF pulses, however, inherently tend to require larger values in RF peak power which may result in substantial increase in Specific Absorption Rate in tissues, which is a constant concern for patient safety at very high field. In this study, we demonstrate adapted rate RF pulse design allowing for SAR reduction while preserving excitation target accuracy. Compared with other proposed implementations of adapted rate RF pulses, our approach is compatible with any k-space trajectories, does not require an analytical expression of the gradient waveform and can be used for large flip angle excitation. We demonstrate our method with numerical simulations based on electromagnetic modeling and we include an experimental verification of transmit pattern accuracy on an 8 transmit channel 9.4 T system. PMID:20556882

  5. Hydrogen peroxide decomposition rate: a shock tube study using tunable laser absorption of H(2)O near 2.5 microm.

    PubMed

    Hong, Zekai; Farooq, Aamir; Barbour, Ethan A; Davidson, David F; Hanson, Ronald K

    2009-11-19

    The thermal decomposition of hydrogen peroxide was measured behind reflected shock waves in hydrogen peroxide/inert gas mixtures using a sensitive laser diagnostic for water vapor. In these mixtures, the formation rate of water is predominantly controlled by the decomposition rate of hydrogen peroxide. Rate determinations were made over a temperature range of 1000-1200 K and a pressure range of 0.9-3.2 atm for both argon and nitrogen carrier gases. Good detection sensitivity for water was achieved using tunable diode laser absorption of water at 2550.96 nm within its v(3) fundamental band. Hydrogen peroxide decomposition rates were found to be independent of pressure at 0.9 and 1.7 atm and showed only slight influence of pressure at 3.2 atm. The best fit of the current data to the low-pressure-limit rate for H(2)O(2) dissociation in argon bath gas is k(1,0) = 10(15.97+/-0.10) exp(-21 220 +/- 250 K/T) [cm(3) mol(-1) s(-1)] (1000-1200 K). Experiments conducted in a nitrogen bath gas show a relative collision efficiency of argon to nitrogen of 0.67.

  6. X-SAR as high-performance interferometric SAR

    NASA Astrophysics Data System (ADS)

    Werner, Marian U.; Schandl, Josef

    1995-11-01

    In April and October 1994 the X-SAR radar has been flown twice onboard the Space Shuttle, as part of the Space Radar Laboratory (SRL-1 and SRL-2). This radar payload is the first synthetic aperture radar (SAR) system of its kind in space, with three frequencies, multi- polarization, variable incidence angle and variable modes of operation. SIR-C/X-SAR, the new generation of imaging microwave remote sensing sensors from space, demonstrated successfully repeat pass interferometry in all three frequencies with a one day repeat as well as a six month repeat orbit. The major problems with the repeat orbit interferometry are the temporal target decorrelation, unsuitable baseline and different squint angles for the two passes to be processed. Therefore, for the third mission of the Space Radar Lab which shall be called SRTM (shuttle radar topographic mapper), single pass interferometry with a second receive antenna is proposed to generate a topographic map of all land surfaces between +60 degrees and -56 degrees latitude. X-SAR's 12 meter long and 40 cm wide main transmit and receive antenna is mounted directly to a tiltable part of the SIR-C antenna truss structure in the Shuttle cargo bay. The second receive antenna is 6 meters long and is mounted together with the second C-band antenna to a 31 meter long deployable boom structure perpendicular to the velocity direction to build the baseline. X-SAR is not capable of operating in a scan SAR model like SIR-C to allow continuous coverage, but will operate in a high resolution mode with a swath width of 30 - 35 km. The engineering design of the interferometric configuration for X-SAR, the requirement specifications, and the predicted performance as well as the mission operation aspects are described in this paper. SIR-C/X- SAR is a cooperative project. The SIR-C instrument was developed by NASA's Jet Propulsion Laboratory (JPL). The X-band radar (X-SAR) was developed by the Dornier and Alenia Spazio Companies for the German

  7. Improved Shock Tube Measurement of the CH4 + Ar = CH3 + H + Ar Rate Constant using UV Cavity-Enhanced Absorption Spectroscopy of CH3.

    PubMed

    Wang, Shengkai; Davidson, David F; Hanson, Ronald K

    2016-07-21

    We report an improved measurement for the rate constant of methane dissociation in argon (CH4 + Ar = CH3 + H + Ar) behind reflected shock waves. The experiment was conducted using a sub-parts per million sensitivity CH3 diagnostic recently developed in our laboratory based on ultraviolet cavity-enhanced absorption spectroscopy. The high sensitivity of this diagnostic allowed for measurements of quantitatively resolved CH3 time histories during the initial stage of CH4 pyrolysis, where the reaction system is clean and free from influences of secondary reactions and temperature change. This high sensitivity also allowed extension of our measurement range to much lower temperatures (<1500 K). The current-reflected shock measurements were performed at temperatures between 1487 and 1866 K and pressures near 1.7 atm, resulting in the following Arrhenius rate constant expression for the title reaction: k(1.7 atm) = 3.7 × 10(16) exp(-42 200 K/T) cm(3)/mol·s, with a 2σ uncertainty factor of 1.25. The current data are in good consensus with various theoretical and review studies, but at the low temperature end they suggest a slightly higher (up to 35%) rate constant compared to these previous results. A re-evaluation of previous and current experimental data in the falloff region was also performed, yielding updated expressions for both the low-pressure limit and the high-pressure limit rate constants and improved agreement with all existing data.

  8. Ten Years Of Subsidence Monitoring With SAR Interferometry And Its Contribution To Risk Management In Aguascalientes, Mexico

    NASA Astrophysics Data System (ADS)

    Esquivel, Ruben; Castaneda, Laura; Taud, Hind; Lira, Jorge

    2013-12-01

    A Study involving GPS and differential SAR interferometry (DInSAR) monitoring is developed to investigate a subsidence phenomenon in Aguascalientes valley and to obtain displacement models concerned with risk management applications and geodetic purposes. DInSAR study with archived Envisat data allows accumulated displacement mapping yearly, and recent TerraSAR-X data implementation provides a more accurate estimation of displacements, which is used for developing models to correct geodetic positions. The maximum subsidence rate calculated is 15 cm/year with a decreasing rate throughout time in some areas.

  9. Measuring the Absorption Rate of CO 2 in Nonaqueous CO 2 -Binding Organic Liquid Solvents with a Wetted-Wall Apparatus

    SciTech Connect

    Mathias, Paul M.; Zheng, Feng; Heldebrant, David J.; Zwoster, Andy; Whyatt, Greg; Freeman, Charles M.; Bearden, Mark D.; Koech, Phillip

    2015-09-17

    The kinetics of the absorption of CO2 into two nonaqueous CO2-binding organic liquid (CO2BOL) solvents were measured at T=35, 45, and 55 °C with a wetted-wall column. Selected CO2 loadings were run with a so-called “first-generation” CO2BOL, comprising an independent base and alcohol, and a “second-generation” CO2BOL, in which the base and alcohol were conjoined. Liquid-film mass-transfer coefficient (k'g) values for both solvents were measured to be comparable to values for monoethanolamine and piperazine aqueous solvents under a comparable driving force, in spite of far higher solution viscosities. An inverse temperature dependence of the k'g value was also observed, which suggests that the physical solubility of CO2 in organic liquids may be making CO2 mass transfer faster than expected. Aspen Plus software was used to model the kinetic data and compare the CO2 absorption behavior of nonaqueous solvents with that of aqueous solvent platforms. This work continues our development of the CO2BOL solvents. Previous work established the thermodynamic properties related to CO2 capture. The present paper quantitatively studies the kinetics of CO2 capture and develops a rate-based model.

  10. Measuring the Absorption Rate of CO2 in Nonaqueous CO2-Binding Organic Liquid Solvents with a Wetted-Wall Apparatus.

    PubMed

    Mathias, Paul M; Zheng, Feng; Heldebrant, David J; Zwoster, Andy; Whyatt, Greg; Freeman, Charles M; Bearden, Mark D; Koech, Phillip

    2015-11-01

    The kinetics of the absorption of CO2 into two nonaqueous CO2-binding organic liquid (CO2 BOL) solvents were measured at T=35, 45, and 55 °C with a wetted-wall column. Selected CO2 loadings were run with a so-called "first-generation" CO2 BOL, comprising an independent base and alcohol, and a "second-generation" CO2 BOL, in which the base and alcohol were conjoined. Liquid-film mass-transfer coefficient (k'g ) values for both solvents were measured to be comparable to values for monoethanolamine and piperazine aqueous solvents under a comparable driving force, in spite of far higher solution viscosities. An inverse temperature dependence of the k'g value was also observed, which suggests that the physical solubility of CO2 in organic liquids may be making CO2 mass transfer faster than expected. Aspen Plus software was used to model the kinetic data and compare the CO2 absorption behavior of nonaqueous solvents with that of aqueous solvent platforms. This work continues our development of the CO2 BOL solvents. Previous work established the thermodynamic properties related to CO2 capture. The present paper quantitatively studies the kinetics of CO2 capture and develops a rate-based model.

  11. Effect of the abrasive properties of sedges on the intestinal absorptive surface and resting metabolic rate of root voles.

    PubMed

    Wieczorek, Monika; Szafrańska, Paulina A; Labecka, Anna Maria; Lázaro, Javier; Konarzewski, Marek

    2015-01-15

    Recent studies on grasses and sedges suggest that the induction of a mechanism reducing digestibility of plant tissues in response to herbivore damage may drive rodent population cycles. This defence mechanism seems to rely on the abrasive properties of ingested plants. However, the underlying mechanism has not been demonstrated in small wild herbivores. Therefore, we carried out an experiment in which we determined the joint effect of abrasive sedge components on the histological structure of small intestine as well as resting metabolic rate (RMR) of the root vole (Microtus oeconomus). Histological examination revealed that voles fed with a sedge-dominated diet had shorter villi composed from narrower enterocytes in duodenum, jejunum and ileum. Reduction in the height of villi decreased along the small intestine. Activity of the mucus secretion increased along the small intestine and was significantly higher in the ileum. The intestinal abrasion exceeded the compensatory capabilities of voles, which responded to a sedge-dominated diet by a reduction of body mass and a concomitant decrease in whole body RMR. These results explain the inverse association between body mass and the probability of winter survival observed in voles inhabiting homogenous sedge wetlands.

  12. Marine Targets Classification in PolInSAR Data

    NASA Astrophysics Data System (ADS)

    Chen, Peng; Yang, Jingsong; Ren, Lin

    2014-11-01

    In this paper, marine stationary targets and moving targets are studied by Pol-In-SAR data of Radarsat-2. A new method of stationary targets detection is proposed. The method get the correlation coefficient image of the In-SAR data, and using the histogram of correlation coefficient image. Then, A Constant False Alarm Rate (CFAR) algorithm and The Probabilistic Neural Network model are imported to detect stationary targets. To find the moving targets, Azimuth Ambiguity is show as an important feature. We use the length of azimuth ambiguity to get the target's moving direction and speed. Make further efforts, Targets classification is studied by rebuild the surface elevation of marine targets.

  13. Marine Targets Classification in PolInSAR Data

    NASA Astrophysics Data System (ADS)

    Chen, Peng; Yang, Jingsong; Ren, Lin

    2014-11-01

    In this paper, marine stationary targets and moving targets are studied by Pol-In-SAR data of Radarsat-2. A new method of stationary targets detection is proposed. The method get the correlation coefficient image of the In-SAR data, and using the histogram of correlation coefficient image. Then , A Constant False Alarm Rate (CFAR) algorithm and The Probabilistic Neural Network model are imported to detect stationary targets. To find the moving targets, Azimuth Ambiguity is show as an important feature. We use the length of azimuth ambiguity to get the target's moving direction and speed. Make further efforts, Targets classification is studied by rebuild the surface elevation of marine targets.

  14. On Ambiguities in SAR Design

    NASA Technical Reports Server (NTRS)

    Freeman, Anthony

    2006-01-01

    Ambiguities are an aliasing effect caused by the periodic sampling of the scene backscatter inherent to pulsed radar systems such as Synthetic Aperture radar (SAR). In this paper we take a fresh look at the relationship between SAR range and azimuth ambiguity constraints on the allowable pulse repetition frequency (PRF) and the antenna length. We show that for high squint angles smaller antennas may be feasible in some cases. For some applications, the ability to form a synthetic aperture at high squint angles is desirable, but the size of the antenna causes problems in the design of systems capable of such operation. This is because the SAR system design is optimized for a side-looking geometry. In two examples design examples we take a suboptimum antenna size and examine the performance in terms of azimuth resolution and swath width as a function of squint angle. We show that for stripmap SARs, the swath width is usually worse for off-boresight squint angles, because it is severely limited by range walk, except in cases where we relax the spatial resolution. We consider the implications for the design of modest-resolution, narrow swath, scanning SAR scatterometers .

  15. Basis for optronic ScanSAR processing

    NASA Astrophysics Data System (ADS)

    Marchese, Linda; Bourqui, Pascal; Turgeon, Sandra; Harnish, Bernd; Suess, Martin; Châteauneuf, François; Bergeron, Alain

    2011-11-01

    ScanSAR is an important imaging mode of operation for SAR systems. It allows extended range coverage albeit at the expense of azimuth resolution. Compared to stripmap, ScanSAR is used more for large swath coverage for mapping and monitoring over a wide area. Applications are numerous and include boreal forest mapping, wetland mapping and soil moisture monitoring. The goal of the present work was thus to explore the possibility of processing ScanSAR data optronicaly. Tests were performed with artificially bursted ASAR stripmap data demonstrating that reconstruction of ScanSAR data using the optronic SAR processor is feasible. This paper describes specifically how the data control and handling of ScanSAR data is performed to make it compatible with the optronic processor that was otherwise specifically designed for stripmap processing. As well, the ScanSAR images generated optronicaly are presented.

  16. SARS Patients and Their Close Contacts

    MedlinePlus

    ... Fact Sheet for SARS Patients and Their Close Contacts Format: Select one PDF [256 KB] Recommend on ... that are not now known. What does "close contact" mean? In the context of SARS, close contact ...

  17. A Bottom-Up Whole-Body Physiologically Based Pharmacokinetic Model to Mechanistically Predict Tissue Distribution and the Rate of Subcutaneous Absorption of Therapeutic Proteins.

    PubMed

    Gill, Katherine L; Gardner, Iain; Li, Linzhong; Jamei, Masoud

    2016-01-01

    The ability to predict subcutaneous (SC) absorption rate and tissue distribution of therapeutic proteins (TPs) using a bottom-up approach is highly desirable early in the drug development process prior to clinical data being available. A whole-body physiologically based pharmacokinetic (PBPK) model, requiring only a few drug parameters, to predict plasma and interstitial fluid concentrations of TPs in humans after intravenous and subcutaneous dosing has been developed. Movement of TPs between vascular and interstitial spaces was described by considering both convection and diffusion processes using a 2-pore framework. The model was optimised using a variety of literature sources, such as tissue lymph/plasma concentration ratios in humans and animals, information on the percentage of dose absorbed following SC dosing via lymph in animals and data showing loss of radiolabelled IgG from the SC dosing site in humans. The resultant model was used to predict t max and plasma concentration profiles for 12 TPs (molecular weight 8-150 kDa) following SC dosing. The predicted plasma concentration profiles were generally comparable to observed data. t max was predicted within 3-fold of reported values, with one third of the predictions within 0.8-1.25-fold. There was no systematic bias in simulated C max values, although a general trend for underprediction of t max was observed. No clear trend between prediction accuracy of t max and TP isoelectric point or molecular size was apparent. The mechanistic whole-body PBPK model described here can be applied to predict absorption rate of TPs into blood and movement into target tissues following SC dosing.

  18. SweepSAR: Beam-forming on Receive Using a Reflector-Phased Array Feed Combination for Spaceborne SAR

    NASA Technical Reports Server (NTRS)

    Freeman, A.; Krieger, G.; Rosen, P.; Younis, M.; Johnson, W. T. K.; Huber, S.; Jordan, R.; Moreira, A.

    2012-01-01

    In this paper, an alternative approach is described that is suited for longer wavelength SARs in particular, employing a large, deployable reflector antenna and a much simpler phased array feed. To illuminate a wide swath, a substantial fraction of the phased array feed is excited on transmit to sub-illuminate the reflector. Shorter transmit pulses are required than for conventional SAR. On receive, a much smaller portion of the phased array feed is used to collect the return echo, so that a greater portion of the reflector antenna area is used. The locus of the portion of the phased array used on receive is adjusted using an analog beam steering network, to 'sweep' the receive beam(s) across the illuminated swath, tracking the return echo. This is similar in some respects to the whiskbroom approach to optical sensors, hence the name: SweepSAR.SweepSAR has advantages over conventional SAR in that it requires less transmit power, and if the receive beam is narrow enough, it is relatively immune to range ambiguities. Compared to direct radiating arrays with digital beam- forming, it is much simpler to implement, uses currently available technologies, is better suited for longer wavelength systems, and does not require extremely high data rates or onboard processing.

  19. Method for removing RFI from SAR images

    DOEpatents

    Doerry, Armin W.

    2003-08-19

    A method of removing RFI from a SAR by comparing two SAR images on a pixel by pixel basis and selecting the pixel with the lower magnitude to form a composite image. One SAR image is the conventional image produced by the SAR. The other image is created from phase-history data which has been filtered to have the frequency bands containing the RFI removed.

  20. Effects of dielectric values of human body on specific absorption rate following 430, 800, and 1200 MHz RF exposure to ingestible wireless device.

    PubMed

    Xu, L S; Meng, Max Q-H; Hu, Chao

    2010-01-01

    In order to assess the compliance of ingestible wireless device (IWD) within safety guidelines, the SAR, and near fields of IWD in two realistic human body models, whose dielectric values are increased from the original by +/-10% and +/- 20% are studied using the finite-difference time-domain method. The radiation characteristics of the IWD in the human body models with changed and unchanged dielectric values are compared. Simulations are carried out at 13 scenarios where the IWD is placed at center positions of abdomens in the two models at the operation frequency of 430, 800, and 1200 MHz, respectively. Results show that variation of radiation intensity near the surface of abdomen is around 2.5, 2.6, and 3.5 dB within 20% variation of dielectric values corresponding to the frequency of 430, 800, and 1200 MHz, respectively. Electric fields in the anterior of the human body models are higher than those in the posterior for all scenarios. SAR values increase with the increase of conductivities of human body tissues, and usually decrease with the increase of relative permittivities of human body tissues. The effect of the dielectric values of human body on SAR is orientation-, human-body-, and frequency-dependent. A variation up to 20% in conductivities and relative permittivities alone or simultaneously always causes a SAR variation less than 10%, 20%, and 30% at the frequency of 430, 800, and 1200 MHz, respectively. As far as the compliance of safety was concerned, the IWD was safe to be used at the input power less than 12.6, 9.3, and 8.4 mW, according to the IEEE safety standards at the frequency of 430, 800, and 1200 MHz, respectively.

  1. Registration of interferometric SAR images

    NASA Technical Reports Server (NTRS)

    Lin, Qian; Vesecky, John F.; Zebker, Howard A.

    1992-01-01

    Interferometric synthetic aperture radar (INSAR) is a new way of performing topography mapping. Among the factors critical to mapping accuracy is the registration of the complex SAR images from repeated orbits. A new algorithm for registering interferometric SAR images is presented. A new figure of merit, the average fluctuation function of the phase difference image, is proposed to evaluate the fringe pattern quality. The process of adjusting the registration parameters according to the fringe pattern quality is optimized through a downhill simplex minimization algorithm. The results of applying the proposed algorithm to register two pairs of Seasat SAR images with a short baseline (75 m) and a long baseline (500 m) are shown. It is found that the average fluctuation function is a very stable measure of fringe pattern quality allowing very accurate registration.

  2. Monsoon '90 - Preliminary SAR results

    NASA Technical Reports Server (NTRS)

    Dubois, Pascale C.; Van Zyl, Jakob J.; Guerra, Abel G.

    1992-01-01

    Multifrequency polarimetric synthetic aperture radar (SAR) images of the Walnut Gulch watershed near Tombstone, Arizona were acquired on 28 Mar. 1990 and on 1 Aug. 1990. Trihedral corner reflectors were deployed prior to both overflights to allow calibration of the two SAR data sets. During both overflights, gravimetric soil moisture and dielectric constant measurements were made. Detailed vegetation height, density, and water content measurements were made as part of the Monsoon 1990 Experiment. Preliminary results based on analysis of the multitemporal polarimetric SAR data are presented. Only the C-band data (5.7-cm wavelength) radar images show significant difference between Mar. and Aug., with the strongest difference observed in the HV images. Based on the radar data analysis and the in situ measurements, we conclude that these differences are mainly due to changes in the vegetation and not due to the soil moisture changes.

  3. Monsoon 1990: Preliminary SAR results

    NASA Technical Reports Server (NTRS)

    Vanzyl, Jakob J.; Dubois, Pascale; Guerra, Abel

    1991-01-01

    Multifrequency polarimetric synthetic aperture radar (SAR) images of the Walnut Gulch watershed near Tombstone, Arizona were acquired on 28 Mar. 1990 and on 1 Aug. 1990. Trihedral corner reflectors were deployed prior to both overflights to allow calibration of the two SAR data sets. During both overflights, gravimetric soil moisture and dielectric constant measurements were made. Detailed vegetation height, density, and water content measurements were made as part of the Monsoon 1990 Experiment. Preliminary results based on analysis of the multitemporal polarimetric SAR data are presented. Only the C-band data (5.7-cm wavelength) radar images show significant difference between Mar. and Aug., with the strongest difference observed in the HV images. Based on the radar data analysis and the in situ measurements, we conclude that these differences are mainly due to changes in the vegetation and not due to the soil moisture changes.

  4. Kronecker STAP and SAR GMTI

    NASA Astrophysics Data System (ADS)

    Greenewald, Kristjan H.; Zelnio, Edmund G.; Hero, Alfred O.

    2016-05-01

    As a high resolution radar imaging modality, SAR detects and localizes non-moving targets accurately, giving it an advantage over lower resolution GMTI radars. Moving target detection is more challenging due to target smearing and masking by clutter. Space-time adaptive processing (STAP) is often used on multiantenna SAR to remove the stationary clutter and enhance the moving targets. In (Greenewald et al., 2016),1 it was shown that the performance of STAP can be improved by modeling the clutter covariance as a space vs. time Kronecker product with low rank factors, providing robustness and reducing the number of training samples required. In this work, we present a massively parallel algorithm for implementing Kronecker product STAP, enabling application to very large SAR datasets (such as the 2006 Gotcha data collection) using GPUs. Finally, we develop an extension of Kronecker STAP that uses information from multiple passes to improve moving target detection.

  5. Registration Of SAR Images With Multisensor Images

    NASA Technical Reports Server (NTRS)

    Evans, Diane L.; Burnette, Charles F.; Van Zyl, Jakob J.

    1993-01-01

    Semiautomated technique intended primarily to facilitate registration of polarimetric synthetic-aperture-radar (SAR) images with other images of same or partly overlapping terrain while preserving polarization information conveyed by SAR data. Technique generally applicable in sense one or both of images to be registered with each other generated by polarimetric or nonpolarimetric SAR, infrared radiometry, conventional photography, or any other applicable sensing method.

  6. System Turns SAR Images Into Maps

    NASA Technical Reports Server (NTRS)

    Curlander, J. C.; Kwok, Ronald; Pang, Shirley S. N.

    1988-01-01

    Postprocessing system for synthetic-aperture radar (SAR) transforms raw images from natural rotated and distorted SAR reference frame into geocoded images. Images automatically corrected to remove slant-range nonlinearities and Doppler skew. Produces multiple-frame mosaics for large-scale mapping. Does not require tedious manual registration of representative "tie" points in raw SAR imagery with known locations on Earth.

  7. Polarization Filtering of SAR Data

    NASA Technical Reports Server (NTRS)

    Dubois, Pascale C.; Van Zyl, Jakob J.

    1991-01-01

    Theoretical analysis of polarization filtering of synthetic-aperture-radar (SAR) returns provide hybrid method applied to either (1) maximize signal-to-noise ratio of return from given target or (2) enhance contrast between targets of two different types (that have different polarization properties). Method valid for both point and extended targets and for both monostatic and bistatic radars as well as SAR. Polarization information in return signals provides more complete description of radar-scattering properties of targets and used to obtain additional information about targets for use in classifying them, discriminating between them, or enhancing features of radar images.

  8. How change of public transportation usage reveals fear of the SARS virus in a city.

    PubMed

    Wang, Kuo-Ying

    2014-01-01

    The outbreaks of the severe acute respiratory syndrome (SARS) epidemic in 2003 resulted in unprecedented impacts on people's daily life. One of the most significant impacts to people is the fear of contacting the SARS virus while engaging daily routine activity. Here we use data from daily underground ridership in Taipei City and daily reported new SARS cases in Taiwan to model the dynamics of the public fear of the SARS virus during the wax and wane of the SARS period. We found that for each reported new SARS case there is an immediate loss of about 1200 underground ridership (the fresh fear). These daily loss rates dissipate to the following days with an e-folding time of about 28 days, reflecting the public perception on the risk of contacting SARS virus when traveling with the underground system (the residual fear). About 50% of daily ridership was lost during the peak of the 2003 SARS period, compared with the loss of 80% daily ridership during the closure of the underground system after Typhoon Nari, the loss of 50-70% ridership due to the closure of the governmental offices and schools during typhoon periods, and the loss of 60% daily ridership during Chinese New Year holidays.

  9. Indoor experimental facility for airborne synthetic aperture radar (SAR) configurations - rail-SAR

    NASA Astrophysics Data System (ADS)

    Kirose, Getachew; Phelan, Brian R.; Sherbondy, Kelly D.; Ranney, Kenneth I.; Koenig, Francois; Narayanan, Ram M.

    2014-05-01

    The Army Research Laboratory (ARL) is developing an indoor experimental facility to evaluate and assess airborne synthetic-aperture-radar-(SAR)-based detection capabilities. The rail-SAR is located in a multi-use facility that also provides a base for research and development in the area of autonomous robotic navigation. Radar explosive hazard detection is one key sensordevelopment area to be investigated at this indoor facility. In particular, the mostly wooden, multi-story building houses a two (2) story housing structure and an open area built over a large sandbox. The housing structure includes reconfigurable indoor walls which enable the realization of multiple See-Through-The-Wall (STTW) scenarios. The open sandbox, on the other hand, allows for surface and buried explosive hazard scenarios. The indoor facility is not rated for true explosive hazard materials so all targets will need to be inert and contain surrogate explosive fills. In this paper we discuss the current system status and describe data collection exercises conducted using canonical targets and frequencies that may be of interest to designers of ultra-wideband (UWB) airborne, ground penetrating SAR systems. A bi-static antenna configuration will be used to investigate the effects of varying airborne SAR parameters such as depression angle, bandwidth, and integration angle, for various target types and deployment scenarios. Canonical targets data were used to evaluate overall facility capabilities and limitations. These data is analyzed and summarized for future evaluations. Finally, processing techniques for dealing with RF multi-path and RFI due to operating inside the indoor facility are described in detail. Discussion of this facility and its capabilities and limitations will provide the explosive hazard community with a great airborne platform asset for sensor to target assessment.

  10. Experimental and numerical analysis of B1+ field and SAR with a new transmit array design for 7 T breast MRI

    NASA Astrophysics Data System (ADS)

    Kim, Junghwan; Krishnamurthy, Narayan; Santini, Tales; Zhao, Yujuan; Zhao, Tiejun; Bae, Kyongtae Ty; Ibrahim, Tamer S.

    2016-08-01

    Developing a radiofrequency (RF) coil system that produces a uniform B1+ field (circularly polarized component of the transverse magnetic field responsible for excitation) and low specific absorption rate (SAR) is critical for high performance ultrahigh field human imaging. In this study, we provide the design of a new eight channel radiofrequency (RF) transmit (Tx) array for breast MRI at 7 T. A numerical analysis utilizing an in-house finite difference time domain (FDTD) package was carried out in (1) four breast models, (2) homogeneous spherical model and (3) full body model to calculate the B1+ intensity (μT) and homogeneity represented by coefficient of variation (CoV = standard deviation/mean) in the proposed RF array design. The numerical results were compared with that measured in breast phantom (Bphantom) and homogeneous spherical phantom at 7 T MRI and showed very good agreement. Average and peak SARs were also calculated in the four breast models and the temperature rises due to the operation of the RF array were also measured in the Bphantom. The proposed RF array; which can operate in a single or multi transmit modes, demonstrates homogeneous RF field excitation with acceptable local/average SAR levels for breast MRI at 7 T.

  11. Robust Ground Target Detection by SAR and IR Sensor Fusion Using Adaboost-Based Feature Selection

    PubMed Central

    Kim, Sungho; Song, Woo-Jin; Kim, So-Hyun

    2016-01-01

    Long-range ground targets are difficult to detect in a noisy cluttered environment using either synthetic aperture radar (SAR) images or infrared (IR) images. SAR-based detectors can provide a high detection rate with a high false alarm rate to background scatter noise. IR-based approaches can detect hot targets but are affected strongly by the weather conditions. This paper proposes a novel target detection method by decision-level SAR and IR fusion using an Adaboost-based machine learning scheme to achieve a high detection rate and low false alarm rate. The proposed method consists of individual detection, registration, and fusion architecture. This paper presents a single framework of a SAR and IR target detection method using modified Boolean map visual theory (modBMVT) and feature-selection based fusion. Previous methods applied different algorithms to detect SAR and IR targets because of the different physical image characteristics. One method that is optimized for IR target detection produces unsuccessful results in SAR target detection. This study examined the image characteristics and proposed a unified SAR and IR target detection method by inserting a median local average filter (MLAF, pre-filter) and an asymmetric morphological closing filter (AMCF, post-filter) into the BMVT. The original BMVT was optimized to detect small infrared targets. The proposed modBMVT can remove the thermal and scatter noise by the MLAF and detect extended targets by attaching the AMCF after the BMVT. Heterogeneous SAR and IR images were registered automatically using the proposed RANdom SAmple Region Consensus (RANSARC)-based homography optimization after a brute-force correspondence search using the detected target centers and regions. The final targets were detected by feature-selection based sensor fusion using Adaboost. The proposed method showed good SAR and IR target detection performance through feature selection-based decision fusion on a synthetic database generated

  12. Robust Ground Target Detection by SAR and IR Sensor Fusion Using Adaboost-Based Feature Selection.

    PubMed

    Kim, Sungho; Song, Woo-Jin; Kim, So-Hyun

    2016-07-19

    Long-range ground targets are difficult to detect in a noisy cluttered environment using either synthetic aperture radar (SAR) images or infrared (IR) images. SAR-based detectors can provide a high detection rate with a high false alarm rate to background scatter noise. IR-based approaches can detect hot targets but are affected strongly by the weather conditions. This paper proposes a novel target detection method by decision-level SAR and IR fusion using an Adaboost-based machine learning scheme to achieve a high detection rate and low false alarm rate. The proposed method consists of individual detection, registration, and fusion architecture. This paper presents a single framework of a SAR and IR target detection method using modified Boolean map visual theory (modBMVT) and feature-selection based fusion. Previous methods applied different algorithms to detect SAR and IR targets because of the different physical image characteristics. One method that is optimized for IR target detection produces unsuccessful results in SAR target detection. This study examined the image characteristics and proposed a unified SAR and IR target detection method by inserting a median local average filter (MLAF, pre-filter) and an asymmetric morphological closing filter (AMCF, post-filter) into the BMVT. The original BMVT was optimized to detect small infrared targets. The proposed modBMVT can remove the thermal and scatter noise by the MLAF and detect extended targets by attaching the AMCF after the BMVT. Heterogeneous SAR and IR images were registered automatically using the proposed RANdom SAmple Region Consensus (RANSARC)-based homography optimization after a brute-force correspondence search using the detected target centers and regions. The final targets were detected by feature-selection based sensor fusion using Adaboost. The proposed method showed good SAR and IR target detection performance through feature selection-based decision fusion on a synthetic database generated

  13. Computerized ionospheric tomography based on geosynchronous SAR

    NASA Astrophysics Data System (ADS)

    Hu, Cheng; Tian, Ye; Dong, Xichao; Wang, Rui; Long, Teng

    2017-02-01

    Computerized ionospheric tomography (CIT) based on spaceborne synthetic aperture radar (SAR) is an emerging technique to construct the three-dimensional (3-D) image of ionosphere. The current studies are all based on the Low Earth Orbit synthetic aperture radar (LEO SAR) which is limited by long repeat period and small coverage. In this paper, a novel ionospheric 3-D CIT technique based on geosynchronous SAR (GEO SAR) is put forward. First, several influences of complex atmospheric environment on GEO SAR focusing are detailedly analyzed, including background ionosphere and multiple scattering effects (induced by turbulent ionosphere), tropospheric effects, and random noises. Then the corresponding GEO SAR signal model is constructed with consideration of the temporal-variant background ionosphere within the GEO SAR long integration time (typically 100 s to 1000 s level). Concurrently, an accurate total electron content (TEC) retrieval method based on GEO SAR data is put forward through subband division in range and subaperture division in azimuth, obtaining variant TEC value with respect to the azimuth time. The processing steps of GEO SAR CIT are given and discussed. Owing to the short repeat period and large coverage area, GEO SAR CIT has potentials of covering the specific space continuously and completely and resultantly has excellent real-time performance. Finally, the TEC retrieval and GEO SAR CIT construction are performed by employing a numerical study based on the meteorological data. The feasibility and correctness of the proposed methods are verified.

  14. [Medical history from SARS to pneumonia].

    PubMed

    Zhen, Cheng

    2003-05-31

    SARS is a new kind of pneumonia. From the end of 2002 to the beginning of 2003, SARS broke in Guangdong province, Hong Kong and Beijing, and then gradually spread to the world. SARS is extremely contagious. The symptoms of SARS progress very quickly. SARS smashes the people's tranquil life and many people live in horror, worry and anxiety. But if we review the medical history of pneumonia, we would have a better understanding of SARS. This article focuses the history of people's understanding of pneumonia on the historical documents, diagnosis, etiology and treatment. Through the epidemic of SARS, the author hopes to express that contagion will live with us for a long time, but it is not a deadly disease. It is preventable and good care is essential for contagious patients. As Chinese people, we should have the best use of TCM in our combat with contagion.

  15. Spacecraft on-board SAR processing technology

    NASA Technical Reports Server (NTRS)

    Liu, K. Y.; Arens, W. E.

    1987-01-01

    This paper provides an assessment of the on-board SAR processing technology for Eos-type missions. The proposed Eos SAR sensor and flight data system are introduced, and the SAR processing requirements are described. The SAR on-board SAR processor architecture selection is discussed, and a baseline processor architecture using a frequency-domain processor for range correlation and a modular fault-tolerant VLSI time-domain parallel array for azimuth correlation are described. The mass storage and VLSI technologies needed for implementing the proposed SAR processing are assessed. It is shown that acceptable processor power and mass characteristics should be feasible for Eos-type applications. A proposed development strategy for the on-board SAR processor is presented.

  16. Further SEASAT SAR coastal ocean wave analysis

    NASA Technical Reports Server (NTRS)

    Kasischke, E. S.; Shuchman, R. A.; Meadows, G. A.; Jackson, P. L.; Tseng, Y.

    1981-01-01

    Analysis techniques used to exploit SEASAT synthetic aperture radar (SAR) data of gravity waves are discussed and the SEASAT SAR's ability to monitor large scale variations in gravity wave fields in both deep and shallow water is evaluated. The SAR analysis techniques investigated included motion compensation adjustments and the semicausal model for spectral analysis of SAR wave data. It was determined that spectra generated from fast Fourier transform analysis (FFT) of SAR wave data were not significantly altered when either range telerotation adjustments or azimuth focus shifts were used during processing of the SAR signal histories, indicating that SEASAT imagery of gravity waves is not significantly improved or degraded by motion compensation adjustments. Evaluation of the semicausal (SC) model using SEASAT SAR data from Rev. 974 indicates that the SC spectral estimates were not significantly better than the FFT results.

  17. Proton Resonance Spectroscopy Study of the Effects of L-Ornithine-L-Aspartate on the Development of Encephalopathy, Using Localization Pulses with Reduced Specific Absorption Rate

    NASA Astrophysics Data System (ADS)

    Slotboom, J.; Vogels, B. A. P. M.; Dehaan, J. G.; Creyghton, J. H. N.; Quack, G.; Chamuleau, R. A. F. M.; Bovee, W. M. M. J.

    Using the SADLOVE ( single-shot adiabatic localized volume excitation) localization technique with reduced specific absorption rate phase-compensated 2π pulses for localization, in vivo rat brain spectra were obtained in order to study the possible beneficial effects of L-ornithine-L-aspartate (OA) on the development of encephalopathy induced by hyperammonemia in portacaval shunted rats, an experimental model for subacute hepatic encephalopathy. The in vivo1H spectra were quantified using a conjugate-gradient-based frequency-domain fitting procedure. OA treatment resulted in an about threefold lower increase in train lactate ( P < 0.0001) and a slower increase of brain glutamine ( P = 0.022) concentration. However, these changes in brain metabolism, including a significantly lower ammonia concentration during OA treatment, were not associated with a sig significant improvement in clinical symptoms of encephalopathy, suggesting either insufficient decrease in brain ammonia concentration or another effect of OA treatment counteracting the lowering effect on blood and brain ammonia and on brain glutamine and lactate. It is concluded that localized in vivo1H MRS of the brain in combination with other analytical techniques, such as in vivo microdialysis, is helpful in explaining pathophysiological changes during hyperammonemia-induced encephalopathy.

  18. Intrinsic absolute bioavailability prediction in rats based on in situ absorption rate constants and/or in vitro partition coefficients: 6-fluoroquinolones.

    PubMed

    Sánchez-Castaño, G; Ruíz-García, A; Bañón, N; Bermejo, M; Merino, V; Freixas, J; Garriguesx, T M; Plá-Delfina, J M

    2000-11-01

    A preliminary study attempting to predict the intrinsic absolute bioavailability of a group of antibacterial 6-fluoroquinolones-including true and imperfect homologues as well as heterologues-was carried out. The intrinsic absolute bioavailability of the test compounds, F, was assessed on permanently cannulated conscious rats by comparing the trapezoidal normalized areas under the plasma concentration-time curves obtained by intravenous and oral routes (n = 8-12). The high-performance liquid chromatography analytical methods used for plasma samples are described. Prediction of the absolute bioavailability of the compounds was based on their intrinsic rat gut in situ absorption rate constant, k(a). The working equation was: where T represents the mean absorbing time. A T value of 0.93 (+/-0.06) h provides the best correlation between predicted and experimentally obtained bioavailabilities (F' and F, respectively) when k(a) values are used (slope a = 1.10; intercept b = -0.05; r = 0.991). The k(a) values can also be expressed in function of the in vitro partition coefficients, P, between n-octanol and a phosphate buffer. In this case, theoretical k(a) values can be determined with the parameters of a standard k(a)/P correlation previously established for a group of model compounds. When P values are taken instead of k(a) values, reliable bioavailability predictions can also be made. These and other relevant features of the method are discussed.

  19. Ideal current patterns yielding optimal signal-to-noise ratio and specific absorption rate in magnetic resonance imaging: computational methods and physical insights.

    PubMed

    Lattanzi, Riccardo; Sodickson, Daniel K

    2012-07-01

    At high and ultra-high magnetic field strengths, understanding interactions between tissues and the electromagnetic fields generated by radiofrequency coils becomes crucial for safe and effective coil design as well as for insight into limits of performance. In this work, we present a rigorous electrodynamic modeling framework, using dyadic Green's functions, to derive the electromagnetic field in homogeneous spherical and cylindrical samples resulting from arbitrary surface currents in the presence or absence of a surrounding radiofrequency shield. We show how to calculate ideal current patterns that result in the highest possible signal-to-noise ratio (ultimate intrinsic signal-to-noise ratio) or the lowest possible radiofrequency power deposition (ultimate intrinsic specific absorption rate) compatible with electrodynamic principles. We identify familiar coil designs within optimal current patterns at low to moderate field strength, thereby establishing and explaining graphically the near-optimality of traditional surface and volume quadrature designs. We also document the emergence of less familiar patterns, e.g., involving substantial electric--as well as magnetic-dipole contributions, at high field strength. Performance comparisons with particular coil array configurations demonstrate that optimal performance may be approached with finite arrays if ideal current patterns are used as a guide for coil design.

  20. Multi-coil approach to reduce electromagnetic energy absorption for wirelessly powered implants.

    PubMed

    RamRakhyani, Anil Kumar; Lazzi, Gianluca

    2014-01-01

    Near-field inductive coupling is a commonly used technique for wireless power transfer (WPT) in biomedical implants. Owing to the close proximity of the implant coil(s) with the tissue ( ∼1 mm) and high current ( ∼100-300 mA) in the magnetic coil(s), a significant induced electric field can be generated for the operating frequency (1-20 MHz). In this Letter, a multi-coil-based WPT technique is proposed to selectively control the currents in the external and implant coils to reduce the specific absorption rate (SAR). A three-coil WPT system, that can achieve 26% reduction in peak 1-g SAR and 15% reduction in peak 10-g SAR, as compared to a two-coil WPT system with the same dimensions, is implemented and used to demonstrate the effectiveness of the proposed approach. To achieve the seamless design for the external and implant electronics, the multi-coil system achieves the same voltage gain and bandwidth as the two-coil design with 46% improvement in the power transfer efficiency.

  1. Evaluation of transmit efficiency and SAR for a tight fit transceiver human head phased array at 9.4 T.

    PubMed

    Avdievich, N I; Hoffmann, J; Shajan, G; Pfrommer, A; Giapitzakis, I A; Scheffler, K; Henning, A

    2017-02-01

    Ultra-high field (UHF, ≥7 T) tight fit transceiver phased arrays improve transmit (Tx) efficiency (B1(+) /√P) in comparison with Tx-only arrays, which are usually larger to fit receive (Rx)-only arrays inside. One of the major problems limiting applications of tight fit arrays at UHFs is the anticipated increase of local tissue heating, which is commonly evaluated by the local specific absorption rate (SAR). To investigate the tradeoff between Tx efficiency and SAR when a tight fit UHF human head transceiver phased array is used instead of a Tx-only/Rx-only RF system, a single-row eight-element prototype of a 400 MHz transceiver head phased array was constructed. The Tx efficiency and SAR of the array were evaluated and compared with that of a larger Tx-only array, which could also be used in combination with an 18-channel Rx-only array. Data were acquired on the Siemens Magnetom whole body 9.4 T human MRI system. Depending on the head size, positioning and the RF shim strategy, the smaller array provides from 11 to 23% higher Tx efficiency. In general, the Tx performance, evaluated as B1(+) /√SAR, i.e. the safety excitation efficiency (SEE), is also not compromised. The two arrays provide very similar SEEs evaluated over 1000 random RF shim sets. We demonstrated that, in general, the tight fit transceiver array improves Tx performance without compromising SEE. However, in specific cases, the SEE value may vary, favoring one of the arrays, and therefore must be carefully evaluated.

  2. Atmospheric Chemistry of 1-Methoxy 2-Propyl Acetate: UV Absorption Cross Sections, Rate Coefficients, and Products of Its Reactions with OH Radicals and Cl Atoms.

    PubMed

    Zogka, Antonia G; Mellouki, Abdelwahid; Romanias, Manolis N; Bedjanian, Yuri; Idir, Mahmoud; Grosselin, Benoit; Daële, Véronique

    2016-11-17

    The rate coefficients for the reactions of OH and Cl with 1-methoxy 2-propyl acetate (MPA) in the gas phase were measured using absolute and relative methods. The kinetic study on the OH reaction was conducted in the temperature (263-373) K and pressure (1-760) Torr ranges using the pulsed laser photolysis-laser-induced fluorescence technique, a low pressure fast flow tube reactor-quadrupole mass spectrometer, and an atmospheric simulation chamber/GC-FID. The derived Arrhenius expression is kMPA+OH(T) = (2.01 ± 0.02) × 10(-12) exp[(588 ± 123/T)] cm(3) molecule(-1) s(-1). The absolute and relative rate coefficients for the reaction of Cl with MPA were measured at room temperature in the flow reactor and the atmospheric simulation chamber, which led to k(Cl+MPA) = (1.98 ± 0.31) × 10(-10) cm(3) molecule(-1) s(-1). GC-FID, GC-MS, and FT-IR techniques were used to investigate the reaction mechanism in the presence of NO. The products formed from the reaction of MPA with OH and their yields were methyl formate (80 ± 7.3%), acetic acid (50 ± 4.8%), and acetic anhydride (22 ± 2.4%), while for Cl reaction, the obtained yields were 60 ± 5.4, 41 ± 3.8, and 11 ± 1.2%, respectively, for the same products. The UV absorption cross section spectrum of MPA was determined in the wavelength range 210-370 nm. The study has shown no photolysis of MPA under atmospheric conditions. The obtained results are used to derive the atmospheric implication.

  3. Prediction and comparison of downlink electric-field and uplink localised SAR values for realistic indoor wireless planning.

    PubMed

    Plets, David; Joseph, Wout; Aerts, Sam; Vanhecke, Kris; Vermeeren, Günter; Martens, Luc

    2014-12-01

    In this paper, for the first time a heuristic network calculator for both whole-body exposure due to indoor base station antennas or access points (downlink exposure) and localised exposure due to the mobile device (uplink exposure) in indoor wireless networks is presented. As an application, three phone call scenarios are investigated (Universal Mobile Telecommunications System (UMTS) macrocell, UMTS femtocell and WiFi voice-over-IP) and compared with respect to the electric-field strength and localised specific absorption rate (SAR) distribution. Prediction models are created and successfully validated with an accuracy of 3 dB. The benefits of the UMTS power control mechanisms are demonstrated. However, dependent on the macrocell connection quality and on the user's average phone call connection time, also the macrocell solution might be preferential from an exposure point of view for the considered scenario.

  4. Controlling Data Collection to Support SAR Image Rotation

    DOEpatents

    Doerry, Armin W.; Cordaro, J. Thomas; Burns, Bryan L.

    2008-10-14

    A desired rotation of a synthetic aperture radar (SAR) image can be facilitated by adjusting a SAR data collection operation based on the desired rotation. The SAR data collected by the adjusted SAR data collection operation can be efficiently exploited to form therefrom a SAR image having the desired rotational orientation.

  5. Linearity analysis of single-ended SAR ADC with split capacitive DAC

    NASA Astrophysics Data System (ADS)

    Osipov, Dmitry; Malankin, Evgeny; Shumikhin, Vitaly

    2016-10-01

    This paper proposes the design of a 6-bit single-ended SAR ADC with a variable sampling rate at a maximum achievable speed of 50 MS/s. The SAR ADC utilizes the split capacitor array DAC with a non-conventional split-capacitor value. The influence of switches in the capacitive DAC on the ADC's non-linearity is analysed. According to the fulfilled analysis the recommendations for switches and capacitor array dimensioning are given to provide a minimum differential non-linearity (DNL). At a sampling rate of 50 MS/s, the SAR ADC achieves an ENOB of 5.4 bit at an input signal frequency of 1 MHz and consumes 1.2 mW at a 1.8 V power supply, resulting in an energy efficiency of 568 fJ/conv.-step. The SAR ADC was simulated with parasitics in a standard 180nm CMOS process.

  6. 5. SWITCH TOWER AND JUNCTION OF S.A.R. #1 & S.A.R. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. SWITCH TOWER AND JUNCTION OF S.A.R. #1 & S.A.R. #2 TRANSMISSION LINES, MARCH 7, 1916. SCE drawing no. 4932. - Santa Ana River Hydroelectric System, Transmission Lines, Redlands, San Bernardino County, CA

  7. A SAR Observation and Numerical Study on Ocean Surface Imprints of Atmospheric Vortex Streets.

    PubMed

    Li, Xiaofeng; Zheng, Weizhong; Zou, Cheng-Zhi; Pichel, William G

    2008-05-21

    The sea surface imprints of Atmospheric Vortex Street (AVS) off Aleutian Volcanic Islands, Alaska were observed in two RADARSAT-1 Synthetic Aperture Radar (SAR) images separated by about 11 hours. In both images, three pairs of distinctive vortices shedding in the lee side of two volcanic mountains can be clearly seen. The length and width of the vortex street are about 60-70 km and 20 km, respectively. Although the AVS's in the two SAR images have similar shapes, the structure of vortices within the AVS is highly asymmetrical. The sea surface wind speed is estimated from the SAR images with wind direction input from Navy NOGAPS model. In this paper we present a complete MM5 model simulation of the observed AVS. The surface wind simulated from the MM5 model is in good agreement with SAR-derived wind. The vortex shedding rate calculated from the model run is about 1 hour and 50 minutes. Other basic characteristics of the AVS including propagation speed of the vortex, Strouhal and Reynolds numbers favorable for AVS generation are also derived. The wind associated with AVS modifies the cloud structure in the marine atmospheric boundary layer. The AVS cloud pattern is also observed on a MODIS visible band image taken between the two RADARSAT SAR images. An ENVISAT advance SAR image taken 4 hours after the second RADARSAT SAR image shows that the AVS has almost vanished.

  8. Antigen Production in Plant to Tackle Infectious Diseases Flare Up: The Case of SARS.

    PubMed

    Demurtas, Olivia C; Massa, Silvia; Illiano, Elena; De Martinis, Domenico; Chan, Paul K S; Di Bonito, Paola; Franconi, Rosella

    2016-01-01

    Severe acute respiratory syndrome (SARS) is a dangerous infection with pandemic potential. It emerged in 2002 and its aetiological agent, the SARS Coronavirus (SARS-CoV), crossed the species barrier to infect humans, showing high morbidity and mortality rates. No vaccines are currently licensed for SARS-CoV and important efforts have been performed during the first outbreak to develop diagnostic tools. Here we demonstrate the transient expression in Nicotiana benthamiana of two important antigenic determinants of the SARS-CoV, the nucleocapsid protein (N) and the membrane protein (M) using a virus-derived vector or agro-infiltration, respectively. For the M protein, this is the first description of production in plants, while for plant-derived N protein we demonstrate that it is recognized by sera of patients from the SARS outbreak in Hong Kong in 2003. The availability of recombinant N and M proteins from plants opens the way to further evaluation of their potential utility for the development of diagnostic and protection/therapy tools to be quickly manufactured, at low cost and with minimal risk, to face potential new highly infectious SARS-CoV outbreaks.

  9. A facile inhibitor screening of SARS coronavirus N protein using nanoparticle-based RNA oligonucleotide.

    PubMed

    Roh, Changhyun

    2012-01-01

    Hundreds of million people worldwide have been infected with severe acute respiratory syndrome (SARS), and the rate of global death from SARS has remarkably increased. Hence, the development of efficient drug treatments for the biological effects of SARS is highly needed. We have previously shown that quantum dots (QDs)-conjugated RNA oligonucleotide is sensitive to the specific recognition of the SARS-associated coronavirus (SARS-CoV) nucleocapsid (N) protein. In this study, we found that a designed biochip could analyze inhibitors of the SARS-CoV N protein using nanoparticle-based RNA oligonucleotide. Among the polyphenolic compounds examined, (-)-catechin gallate and (-)-gallocatechin gallate demonstrated a remarkable inhibition activity on SARS-CoV N protein. (-)-catechin gallate and (-)-gallocatechin gallate attenuated the binding affinity in a concentrated manner as evidenced by QDs-conjugated RNA oligonucleotide on a designed biochip. At a concentration of 0.05 μg mL(-1), (-)-catechin gallate and (-)-gallocatechin gallate showed more than 40% inhibition activity on a nanoparticle-based RNA oligonucleotide biochip system.

  10. Monitoring of Land Subsidence in Ravenna Municipality Using Integrated SAR - GPS Techniques: Description and First Results

    NASA Astrophysics Data System (ADS)

    Artese, G.; Fiaschi, S.; Di Martire, D.; Tessitore, S.; Fabris, M.; Achilli, V.; Ahmed, A.; Borgstrom, S.; Calcaterra, D.; Ramondini, M.; Artese, S.; Floris, M.; Menin, A.; Monego, M.; Siniscalchi, V.

    2016-06-01

    The Emilia Romagna Region (N-E Italy) and in particular the Adriatic Sea coastline of Ravenna, is affected by a noticeable subsidence that started in the 1950s, when the exploitation of on and off-shore methane reservoirs began, along with the pumping of groundwater for industrial uses. In such area the current subsidence rate, even if lower than in the past, reaches the -2 cm/y. Over the years, local Authorities have monitored this phenomenon with different techniques: spirit levelling, GPS surveys and, more recently, Differential Interferometric Synthetic Aperture Radar (DInSAR) techniques, confirming the critical situation of land subsidence risk. In this work, we present the comparison between the results obtained with DInSAR and GPS techniques applied to the study of the land subsidence in the Ravenna territory. With regard to the DInSAR, the Small Baseline Subset (SBAS) and the Coherent Pixel Technique (CPT) techniques have been used. Different SAR datasets have been exploited: ERS-1/2, ENVISAT, TerraSAR-X and Sentinel-1. Some GPS campaigns have been also carried out in a subsidence prone area. 3D vertices have been selected very close to existing persistent scatterers in order to link the GPS measurement results to the SAR ones. GPS data were processed into the International reference system and the comparisons between the coordinates, for the first 6 months of the monitoring, provided results with the same trend of the DInSAR data, even if inside the precision of the method.

  11. Reflectors for SAR performance testing.

    SciTech Connect

    Doerry, Armin Walter

    2008-01-01

    Synthetic Aperture Radar (SAR) performance testing and estimation is facilitated by observing the system response to known target scene elements. Trihedral corner reflectors and other canonical targets play an important role because their Radar Cross Section (RCS) can be calculated analytically. However, reflector orientation and the proximity of the ground and mounting structures can significantly impact the accuracy and precision with which measurements can be made. These issues are examined in this report.

  12. SAR Image Complex Pixel Representations

    SciTech Connect

    Doerry, Armin W.

    2015-03-01

    Complex pixel values for Synthetic Aperture Radar (SAR) images of uniform distributed clutter can be represented as either real/imaginary (also known as I/Q) values, or as Magnitude/Phase values. Generally, these component values are integers with limited number of bits. For clutter energy well below full-scale, Magnitude/Phase offers lower quantization noise than I/Q representation. Further improvement can be had with companding of the Magnitude value.

  13. SAR Object Change Detection Study.

    DTIC Science & Technology

    1980-03-01

    based techniques when applied to Synthetic Aperature Radar (SAR imagery. DOUGLA 3. PRASKA, 2LT, USAF Project Engineer viii Section 1 INTRODUCTION AND...to assess the applicability of three region-based change-detection methods to synthetic aperture radar imagery. I/ Ac .0ion For K:CTAB [ ft i . i...Section 2, the algorithms developed were applied to synthetic -aperture radar image data furnished by RADC. Some preprocessing of all images was required

  14. Parallel strategies for SAR processing

    NASA Astrophysics Data System (ADS)

    Segoviano, Jesus A.

    2004-12-01

    This article proposes a series of strategies for improving the computer process of the Synthetic Aperture Radar (SAR) signal treatment, following the three usual lines of action to speed up the execution of any computer program. On the one hand, it is studied the optimization of both, the data structures and the application architecture used on it. On the other hand it is considered a hardware improvement. For the former, they are studied both, the usually employed SAR process data structures, proposing the use of parallel ones and the way the parallelization of the algorithms employed on the process is implemented. Besides, the parallel application architecture classifies processes between fine/coarse grain. These are assigned to individual processors or separated in a division among processors, all of them in their corresponding architectures. For the latter, it is studied the hardware employed on the computer parallel process used in the SAR handling. The improvement here refers to several kinds of platforms in which the SAR process is implemented, shared memory multicomputers, and distributed memory multiprocessors. A comparison between them gives us some guidelines to follow in order to get a maximum throughput with a minimum latency and a maximum effectiveness with a minimum cost, all together with a limited complexness. It is concluded and described, that the approach consisting of the processing of the algorithms in a GNU/Linux environment, together with a Beowulf cluster platform offers, under certain conditions, the best compromise between performance and cost, and promises the major development in the future for the Synthetic Aperture Radar computer power thirsty applications in the next years.

  15. The effect of authentic metallic implants on the SAR distribution of the head exposed to 900, 1800 and 2450 MHz dipole near field.

    PubMed

    Virtanen, H; Keshvari, J; Lappalainen, R

    2007-03-07

    As the use of radiofrequency (RF) electromagnetic (EM) fields has increased along with increased use of wireless communication, the possible related health risks have also been widely discussed. One safety aspect is the interaction of medical implants and RF devices like mobile phones. In the literature, effects on active implants like pacemakers have been discussed but the studies of passive metallic (i.e. conductive) implants are rare. However, some studies have shown that the EM power absorption in tissues may be enhanced due to metallic implants. In this study, the effect of authentic passive metallic implants in the head region was examined. A half-wave dipole antenna was used as an exposure source and the specific absorption rate (SAR, W kg(-1)) in the near field was studied numerically. The idea was to model the presumably worst cases of most common implants in an accurate MRI-based phantom. As exposure frequencies GSM (900 and 1800 MHz) and UMTS (2450 MHz) regions were considered. The implants studied were skull plates, fixtures, bone plates and ear rings. The results indicate that some of the implants, under very rare exposure conditions, may cause a notable enhancement in peak mass averaged SAR.

  16. The effect of authentic metallic implants on the SAR distribution of the head exposed to 900, 1800 and 2450 MHz dipole near field

    NASA Astrophysics Data System (ADS)

    Virtanen, H.; Keshvari, J.; Lappalainen, R.

    2007-03-01

    As the use of radiofrequency (RF) electromagnetic (EM) fields has increased along with increased use of wireless communication, the possible related health risks have also been widely discussed. One safety aspect is the interaction of medical implants and RF devices like mobile phones. In the literature, effects on active implants like pacemakers have been discussed but the studies of passive metallic (i.e. conductive) implants are rare. However, some studies have shown that the EM power absorption in tissues may be enhanced due to metallic implants. In this study, the effect of authentic passive metallic implants in the head region was examined. A half-wave dipole antenna was used as an exposure source and the specific absorption rate (SAR, W kg-1) in the near field was studied numerically. The idea was to model the presumably worst cases of most common implants in an accurate MRI-based phantom. As exposure frequencies GSM (900 and 1800 MHz) and UMTS (2450 MHz) regions were considered. The implants studied were skull plates, fixtures, bone plates and ear rings. The results indicate that some of the implants, under very rare exposure conditions, may cause a notable enhancement in peak mass averaged SAR.

  17. Classification of the Gabon SAR Mosaic Using a Wavelet Based Rule Classifier

    NASA Technical Reports Server (NTRS)

    Simard, Marc; Saatchi, Sasan; DeGrandi, Gianfranco

    2000-01-01

    A method is developed for semi-automated classification of SAR images of the tropical forest. Information is extracted using the wavelet transform (WT). The transform allows for extraction of structural information in the image as a function of scale. In order to classify the SAR image, a Desicion Tree Classifier is used. The method of pruning is used to optimize classification rate versus tree size. The results give explicit insight on the type of information useful for a given class.

  18. Spaceborne SAR Imaging Algorithm for Coherence Optimized

    PubMed Central

    Qiu, Zhiwei; Yue, Jianping; Wang, Xueqin; Yue, Shun

    2016-01-01

    This paper proposes SAR imaging algorithm with largest coherence based on the existing SAR imaging algorithm. The basic idea of SAR imaging algorithm in imaging processing is that output signal can have maximum signal-to-noise ratio (SNR) by using the optimal imaging parameters. Traditional imaging algorithm can acquire the best focusing effect, but would bring the decoherence phenomenon in subsequent interference process. Algorithm proposed in this paper is that SAR echo adopts consistent imaging parameters in focusing processing. Although the SNR of the output signal is reduced slightly, their coherence is ensured greatly, and finally the interferogram with high quality is obtained. In this paper, two scenes of Envisat ASAR data in Zhangbei are employed to conduct experiment for this algorithm. Compared with the interferogram from the traditional algorithm, the results show that this algorithm is more suitable for SAR interferometry (InSAR) research and application. PMID:26871446

  19. SAR image registration based on Susan algorithm

    NASA Astrophysics Data System (ADS)

    Wang, Chun-bo; Fu, Shao-hua; Wei, Zhong-yi

    2011-10-01

    Synthetic Aperture Radar (SAR) is an active remote sensing system which can be installed on aircraft, satellite and other carriers with the advantages of all day and night and all-weather ability. It is the important problem that how to deal with SAR and extract information reasonably and efficiently. Particularly SAR image geometric correction is the bottleneck to impede the application of SAR. In this paper we introduces image registration and the Susan algorithm knowledge firstly, then introduces the process of SAR image registration based on Susan algorithm and finally presents experimental results of SAR image registration. The Experiment shows that this method is effective and applicable, no matter from calculating the time or from the calculation accuracy.

  20. Building Detection in SAR Imagery

    SciTech Connect

    Steinbach, Ryan Matthew; Koch, Mark William; Moya, Mary M; Goold, Jeremy

    2014-08-01

    Current techniques for building detection in Synthetic Aperture Radar (SAR) imagery can be computationally expensive and/or enforce stringent requirements for data acquisition. The desire is to present a technique that is effective and efficient at determining an approximate building location. This approximate location can be used to extract a portion of the SAR image to then perform a more robust detection. The proposed technique assumes that for the desired image, bright lines and shadows, SAR artifact effects, are approximately labeled. These labels are enhanced and utilized to locate buildings, only if the related bright lines and shadows can be grouped. In order to find which of the bright lines and shadows are related, all of the bright lines are connected to all of the shadows. This allows the problem to be solved from a connected graph viewpoint. Where the nodes are the bright lines and shadows and the arcs are the connections between bright lines and shadows. Constraints based on angle of depression and the relationship between connected bright lines and shadows are applied to remove unrelated arcs. Once the related bright lines and shadows are grouped, their locations are combined to provide an approximate building location. Experimental results are provided showing the outcome of the technique.

  1. Building detection in SAR imagery

    SciTech Connect

    Steinbach, Ryan Matthew

    2015-04-01

    Current techniques for building detection in Synthetic Aperture Radar (SAR) imagery can be computationally expensive and/or enforce stringent requirements for data acquisition. I present two techniques that are effective and efficient at determining an approximate building location. This approximate location can be used to extract a portion of the SAR image to then perform a more robust detection. The proposed techniques assume that for the desired image, bright lines and shadows, SAR artifact effects, are approximately labeled. These labels are enhanced and utilized to locate buildings, only if the related bright lines and shadows can be grouped. In order to find which of the bright lines and shadows are related, all of the bright lines are connected to all of the shadows. This allows the problem to be solved from a connected graph viewpoint, where the nodes are the bright lines and shadows and the arcs are the connections between bright lines and shadows. For the first technique, constraints based on angle of depression and the relationship between connected bright lines and shadows are applied to remove unrelated arcs. The second technique calculates weights for the connections and then performs a series of increasingly relaxed hard and soft thresholds. This results in groups of various levels on their validity. Once the related bright lines and shadows are grouped, their locations are combined to provide an approximate building location. Experimental results demonstrate the outcome of the two techniques. The two techniques are compared and discussed.

  2. SAR data compression: Application, requirements, and designs

    NASA Technical Reports Server (NTRS)

    Curlander, John C.; Chang, C. Y.

    1991-01-01

    The feasibility of reducing data volume and data rate is evaluated for the Earth Observing System (EOS) Synthetic Aperture Radar (SAR). All elements of data stream from the sensor downlink data stream to electronic delivery of browse data products are explored. The factors influencing design of a data compression system are analyzed, including the signal data characteristics, the image quality requirements, and the throughput requirements. The conclusion is that little or no reduction can be achieved in the raw signal data using traditional data compression techniques (e.g., vector quantization, adaptive discrete cosine transform) due to the induced phase errors in the output image. However, after image formation, a number of techniques are effective for data compression.

  3. InSAR Forensics: Tracing InSAR Scatterers in High Resolution Optical Image

    NASA Astrophysics Data System (ADS)

    Wang, Yuanyuan; Zhu, XiaoXiang

    2015-05-01

    This paper presents a step towards a better interpretation of the scattering mechanism of different objects and their deformation histories in SAR interferometry (InSAR). The proposed technique traces individual SAR scatterer in high resolution optical images where their geometries, materials, and other properties can be better analyzed and classified. And hence scatterers of a same object can be analyzed in group, which brings us to a new level of InSAR deformation monitoring.

  4. Large scale study on the variation of RF energy absorption in the head & brain regions of adults and children and evaluation of the SAM phantom conservativeness.

    PubMed

    Keshvari, J; Kivento, M; Christ, A; Bit-Babik, G

    2016-04-21

    This paper presents the results of two computational large scale studies using highly realistic exposure scenarios, MRI based human head and hand models, and two mobile phone models. The objectives are (i) to study the relevance of age when people are exposed to RF by comparing adult and child heads and (ii) to analyze and discuss the conservativeness of the SAM phantom for all age groups. Representative use conditions were simulated using detailed CAD models of two mobile phones operating between 900 MHz and 1950 MHz including configurations with the hand holding the phone, which were not considered in most previous studies. The peak spatial-average specific absorption rate (psSAR) in the head and the pinna tissues is assessed using anatomically accurate head and hand models. The first of the two mentioned studies involved nine head-, four hand- and two phone-models, the second study included six head-, four hand- and three simplified phone-models (over 400 configurations in total). In addition, both studies also evaluated the exposure using the SAM phantom. Results show no systematic differences between psSAR induced in the adult and child heads. The exposure level and its variation for different age groups may be different for particular phones, but no correlation between psSAR and model age was found. The psSAR from all exposure conditions was compared to the corresponding configurations using SAM, which was found to be conservative in the large majority of cases.

  5. Large scale study on the variation of RF energy absorption in the head & brain regions of adults and children and evaluation of the SAM phantom conservativeness

    NASA Astrophysics Data System (ADS)

    Keshvari, J.; Kivento, M.; Christ, A.; Bit-Babik, G.

    2016-04-01

    This paper presents the results of two computational large scale studies using highly realistic exposure scenarios, MRI based human head and hand models, and two mobile phone models. The objectives are (i) to study the relevance of age when people are exposed to RF by comparing adult and child heads and (ii) to analyze and discuss the conservativeness of the SAM phantom for all age groups. Representative use conditions were simulated using detailed CAD models of two mobile phones operating between 900 MHz and 1950 MHz including configurations with the hand holding the phone, which were not considered in most previous studies. The peak spatial-average specific absorption rate (psSAR) in the head and the pinna tissues is assessed using anatomically accurate head and hand models. The first of the two mentioned studies involved nine head-, four hand- and two phone-models, the second study included six head-, four hand- and three simplified phone-models (over 400 configurations in total). In addition, both studies also evaluated the exposure using the SAM phantom. Results show no systematic differences between psSAR induced in the adult and child heads. The exposure level and its variation for different age groups may be different for particular phones, but no correlation between psSAR and model age was found. The psSAR from all exposure conditions was compared to the corresponding configurations using SAM, which was found to be conservative in the large majority of cases.

  6. Satellite SAR geocoding with refined RPC model

    NASA Astrophysics Data System (ADS)

    Zhang, Lu; Balz, Timo; Liao, Mingsheng

    2012-04-01

    Recent studies have proved that the Rational Polynomial Camera (RPC) model is able to act as a reliable replacement of the rigorous Range-Doppler (RD) model for the geometric processing of satellite SAR datasets. But its capability in absolute geolocation of SAR images has not been evaluated quantitatively. Therefore, in this article the problems of error analysis and refinement of SAR RPC model are primarily investigated to improve the absolute accuracy of SAR geolocation. Range propagation delay and azimuth timing error are identified as two major error sources for SAR geolocation. An approach based on SAR image simulation and real-to-simulated image matching is developed to estimate and correct these two errors. Afterwards a refined RPC model can be built from the error-corrected RD model and then used in satellite SAR geocoding. Three experiments with different settings are designed and conducted to comprehensively evaluate the accuracies of SAR geolocation with both ordinary and refined RPC models. All the experimental results demonstrate that with RPC model refinement the absolute location accuracies of geocoded SAR images can be improved significantly, particularly in Easting direction. In another experiment the computation efficiencies of SAR geocoding with both RD and RPC models are compared quantitatively. The results show that by using the RPC model such efficiency can be remarkably improved by at least 16 times. In addition the problem of DEM data selection for SAR image simulation in RPC model refinement is studied by a comparative experiment. The results reveal that the best choice should be using the proper DEM datasets of spatial resolution comparable to that of the SAR images.

  7. A Modular and Configurable Instrument Electronics Architecture for "MiniSAR"- An Advanced Smallsat SAR Instrument

    NASA Astrophysics Data System (ADS)

    Gomez, Jaime; Pastena, Max; Bierens, Laurens

    2013-08-01

    MiniSAR is a Dutch program focused on the development of a commercial smallsat featuring a SAR instrument, led by SSBV as prime contractor. In this paper an Instrument Electronics (IEL) system concept to meet the MiniSAR demands is presented. This system has several specificities wrt similar initiatives in the European space industry, driven by our main requirement: keep it small.

  8. Comparing The Results Of Terrasar-X And Envisat Sar Images With Ps-InSAR Methods On Slow Motion Landslides: Koyulhisar, Turkey

    NASA Astrophysics Data System (ADS)

    Demirel, Mehmet; Poyraz, Fatih; Özgür Hastaoğlu, Kemal; Türk, Tarık; Tatar, Orhan; Birdal, Anıl Can

    2015-04-01

    In recent years, PS-InSAR method has been used widely on monitoring slow motion landslides. The motion amounts obtained by PS-InSAR method is avaliable only in LOS(line of sight) and it can't provide information about three dimensional motions. Nevertheless, motions caused by landslides are usually 3 dimensional and also they are not homogeneous. This is one of the biggest handicaps of monitoring landslides with SAR method. In this study, annual motion rates of the PS points that are located in Koyulhisar landslide region are obtained from differently resolutioned sar images of Envisat and Terrasar-x satellite's frames through PS-InSAR method and by using StaMPS software. Throughout the landslide region a profile has been established in North-South line, and the correlation of the results obtained from the sar images lining on this profile. All results are observed to have %80 correlation with each other. By means of these results a subsidence area has been found in the northern region and an uplifting area has been found in the southern region. Through this study, general information about the landslide mechanism has been obtained.

  9. SIR-C/X-SAR free flyer concept

    NASA Technical Reports Server (NTRS)

    Monson, R.

    1993-01-01

    Viewgraphs on Spaceborne Imaging Radar (SAR) - C/X- Synthetic Aperture Radar (SAR) Free Flyer concept are presented. An overview, science objectives, science rationale, geophysical parameters from SAR, programmatic goals, concept description, and a candidate mission description are included.

  10. High resolution SAR applications and instrument design

    NASA Technical Reports Server (NTRS)

    Dionisio, C.; Torre, A.

    1993-01-01

    The Synthetic Aperture Radar (SAR) has viewed, in the last two years, a huge increment of interest from many preset and potential users. The good spatial resolution associated to the all weather capability lead to considering SAR not only a scientific instrument but a tool for verifying and controlling the daily human relationships with the Earth Environment. New missions were identified for SAR as spatial resolution became lower than three meters: disasters, pollution, ships traffic, volcanic eruptions, earthquake effect are only a few of the possible objects which can be effectively detected, controlled and monitored by SAR mounted on satellites. High resolution radar design constraints and dimensioning are discussed.

  11. Bistatic SAR: Signal Processing and Image Formation.

    SciTech Connect

    Wahl, Daniel E.; Yocky, David A.

    2014-10-01

    This report describes the significant processing steps that were used to take the raw recorded digitized signals from the bistatic synthetic aperture RADAR (SAR) hardware built for the NCNS Bistatic SAR project to a final bistatic SAR image. In general, the process steps herein are applicable to bistatic SAR signals that include the direct-path signal and the reflected signal. The steps include preprocessing steps, data extraction to for a phase history, and finally, image format. Various plots and values will be shown at most steps to illustrate the processing for a bistatic COSMO SkyMed collection gathered on June 10, 2013 on Kirtland Air Force Base, New Mexico.

  12. Mapping ground surface deformation using temporarily coherent point SAR interferometry: Application to Los Angeles Basin

    USGS Publications Warehouse

    Zhang, L.; Lu, Zhiming; Ding, X.; Jung, H.-S.; Feng, G.; Lee, C.-W.

    2012-01-01

    Multi-temporal interferometric synthetic aperture radar (InSAR) is an effective tool to detect long-term seismotectonic motions by reducing the atmospheric artifacts, thereby providing more precise deformation signal. The commonly used approaches such as persistent scatterer InSAR (PSInSAR) and small baseline subset (SBAS) algorithms need to resolve the phase ambiguities in interferogram stacks either by searching a predefined solution space or by sparse phase unwrapping methods; however the efficiency and the success of phase unwrapping cannot be guaranteed. We present here an alternative approach - temporarily coherent point (TCP) InSAR (TCPInSAR) - to estimate the long term deformation rate without the need of phase unwrapping. The proposed approach has a series of innovations including TCP identification, TCP network and TCP least squares estimator. We apply the proposed method to the Los Angeles Basin in southern California where structurally active faults are believed capable of generating damaging earthquakes. The analysis is based on 55 interferograms from 32 ERS-1/2 images acquired during Oct. 1995 and Dec. 2000. To evaluate the performance of TCPInSAR on a small set of observations, a test with half of interferometric pairs is also performed. The retrieved TCPInSAR measurements have been validated by a comparison with GPS observations from Southern California Integrated GPS Network. Our result presents a similar deformation pattern as shown in past InSAR studies but with a smaller average standard deviation (4.6. mm) compared with GPS observations, indicating that TCPInSAR is a promising alternative for efficiently mapping ground deformation even from a relatively smaller set of interferograms. ?? 2011.

  13. From SARS coronavirus to novel animal and human coronaviruses.

    PubMed

    To, Kelvin K W; Hung, Ivan F N; Chan, Jasper F W; Yuen, Kwok-Yung

    2013-08-01

    In 2003, severe acute respiratory syndrome coronavirus (SARS-CoV) caused one of the most devastating epidemics known to the developed world. There were two important lessons from this epidemic. Firstly, coronaviruses, in addition to influenza viruses, can cause severe and rapidly spreading human infections. Secondly, bats can serve as the origin and natural animal reservoir of deadly human viruses. Since then, researchers around the world, especially those in Asia where SARS-CoV was first identified, have turned their focus to find novel coronaviruses infecting humans, bats, and other animals. Two human coronaviruses, HCoV-HKU1 and HCoV-NL63, were identified shortly after the SARS-CoV epidemic as common causes of human respiratory tract infections. In 2012, a novel human coronavirus, now called Middle East respiratory syndrome coronavirus (MERS-CoV), has emerged in the Middle East to cause fatal human infections in three continents. MERS-CoV human infection is similar to SARS-CoV in having a high fatality rate and the ability to spread from person to person which resulted in secondary cases among close contacts including healthcare workers without travel history to the Middle East. Both viruses also have close relationships with bat coronaviruses. New cases of MERS-CoV infection in humans continue to occur with the origins of the virus still unknown in many cases. A multifaceted approach is necessary to control this evolving MERS-CoV outbreak. Source identification requires detailed epidemiological studies of the infected patients and enhanced surveillance of MERS-CoV or similar coronaviruses in humans and animals. Early diagnosis of infected patients and appropriate infection control measures will limit the spread in hospitals, while social distancing strategies may be necessary to control the outbreak in communities if it remained uncontrolled as in the SARS epidemic.

  14. Laboratory studies of some halogenated ethanes and ethers: Measurements of rates of reaction with OH and of infrared absorption cross-sections

    NASA Astrophysics Data System (ADS)

    Brown, Anne C.; Canosa-Mas, Carlos E.; Douglas Parr, A.; Wayne, Richard P.

    We have measured, using a conventional discharge-flow resonance-fluorescence technique, the rates of reaction between the hydroxyl radical and a series of halogenated ethanes and ethers for the temperature range 230-423 K. Our measurements gave the following Arrhenius expressions (units are cm 3 molecule -1 s -1): CF 2HCH 3 (HFC-152), 14.2 × 10 -13 exp-(1050/ T); CF 2ClCH 3 (HCFC-142b), 2.6 × 10 -13 exp-(1230/ T); CFCl 2CH 3 (HCFC-141b), 5.8 × 10 -13 exp-(1100/ T); CF 3CFH 2 (HFC-134a), 5.8 × 10 -13 exp-(1350/ T); CF 3CF 2H (HFC-125), 2.8 × 10 -13 exp-(1350/ T); CF 3CCl 2H (HCFC-123), 11.8 × 10 -13 exp-(900/ T); CF 2HOCF 2CFClH, (enflurane), 6.1 × 10 -13 exp-(1080/ T); CFH 2OCH(CF 3) 2, (sevoflurane), 15.3 × 10 -13 exp-(900/ T). In two cases, we measured rate constants only at room temperature: CF 3CClBrH (halothane), 6 × 10 -14 and CF 2HOCClHCF 3 (isoflurane), 2.1 × 10 -14. We also report the following values for the integrated absorption cross-sections of the compounds in the spectral region 800-1200 cm -1 in units of cm -2 atm -1: CF 2HCH 3, 1155; CF 2ClCH 3, 1422; CFCl 2CH 3, 1995; CF 3CFH 2, 2686; CF 3CF 2H, 1970, CF 3CCl 2H, 1411; CF 3CClBrH, 1400; CF 2HOCF 2CFClH, 4800; CF 2HOCClHCF 3, 3900; CFH 2OCH(CF 3) 2, 2550. We use our measurements to calculate ozone depletion potentials and greenhouse warming potentials relative to CFCl 3 for each compound.

  15. Three-dimensional surface reconstruction from multistatic SAR images.

    PubMed

    Rigling, Brian D; Moses, Randolph L

    2005-08-01

    This paper discusses reconstruction of three-dimensional surfaces from multiple bistatic synthetic aperture radar (SAR) images. Techniques for surface reconstruction from multiple monostatic SAR images already exist, including interferometric processing and stereo SAR. We generalize these methods to obtain algorithms for bistatic interferometric SAR and bistatic stereo SAR. We also propose a framework for predicting the performance of our multistatic stereo SAR algorithm, and, from this framework, we suggest a metric for use in planning strategic deployment of multistatic assets.

  16. InfoTerra/TerraSAR initiative

    NASA Astrophysics Data System (ADS)

    Wahl, Manfred W.

    2004-01-01

    The overarching goal of the InfoTerra/TerraSAR Initiative is to establish a self-sustaining operational/commercial business built on Europe"s know-how and experience in space-borne Synthetic Aperture Radar (SAR) technology, in SAR data processing as well as in SAR applications. InfoTerra stands for a new business concept based on supplying innovative geo-information products and services. TerraSAR is a space and ground system conceived to consist of an initial deployment and operation of 2 Radar satellites (one in X- and one in L-band) flying in a tandem configuration in the same orbit. The design of TerraSAR is driven by the market and is user-oriented. TerraSAR is key to capturing a significant proportion of the existing market and to opening new market opportunities, when it becomes operational. The InfoTerra/TerraSAR Initiative has evolved gradually. It started in 1997 as a joint venture between German (DSS) and British (MMS-UK) space industry, strongly supported by both space agencies, DLR and BNSC. In early 2001, DLR and BNSC submitted to ESA the Formal Programme Proposal for InfoTerra/TerraSAR to become an essential element of ESA"s Earth Watch Programme. In summer 2001, when it became evident that there was not yet sufficient support from the ESA Member States to allow immediate start entering into TerraSAR Phase C/D, it has been decided to implement first a TerraSAR consolidation phase. In early 2002, in order to avoid further delays, a contract was signed between DLR and Astrium GmbH on the development of one component of TerraSAR, the TerraSAR-X, in the frame of a national programme, governed by a Public Private Partnership Agreement. Even if now the different launch dates for TerraSAR-X and TerraSAR-L are narrowing down the window of common data acquisition, it is a reasonable starting point, but it should always be kept in mind that the utmost goal for the longterm is to achieve self sustainability by supplying geo-information products and services

  17. Helmand river hydrologic studies using ALOS PALSAR InSAR and ENVISAT altimetry

    USGS Publications Warehouse

    Lu, Zhiming; Kim, J.-W.; Lee, H.; Shum, C.K.; Duan, J.; Ibaraki, M.; Akyilmaz, O.; Read, C.-H.

    2009-01-01

    The Helmand River wetland represents the only fresh-water resource in southern Afghanistan and one of the least mapped water basins in the world. The relatively narrow wetland consists of mostly marshes surrounded by dry lands. In this study, we demonstrate the use of the Advanced Land Observing Satellite (ALOS) Phased Array type L-band Synthetic Aperture Radar (PALSAR) Interferometric SAR (InSAR) to detect the changes of the Helmand River wetland water level. InSAR images are combined with the geocentric water level measurements from the retracked high-rate (18-Hz) Environmental Satellite (Envisat) radar altimetry to construct absolute water level changes over the marshes. It is demonstrated that the integration of the altimeter and InSAR can provide spatio-temporal measurements of water level variation over the Helmand River marshes where in situ measurements are absent. ?? Taylor & Francis Group, LLC.

  18. SBAS-InSAR analysis of surface deformation at Mauna Loa and Kilauea volcanoes in Hawaii

    USGS Publications Warehouse

    Casu, F.; Lanari, Riccardo; Sansosti, E.; Solaro, G.; Tizzani, Pietro; Poland, M.; Miklius, Asta

    2009-01-01

    We investigate the deformation of Mauna Loa and K??lauea volcanoes, Hawai'i, by exploiting the advanced differential Synthetic Aperture Radar Interferometry (InSAR) technique referred to as the Small BAseline Subset (SBAS) algorithm. In particular, we present time series of line-of-sight (LOS) displacements derived from SAR data acquired by the ASAR instrument, on board the ENVISAT satellite, from the ascending (track 93) and descending (track 429) orbits between 2003 and 2008. For each coherent pixel of the radar images we compute time-dependent surface displacements as well as the average LOS deformation rate. Our results quantify, in space and time, the complex deformation of Mauna Loa and K??lauea volcanoes. The derived InSAR measurements are compared to continuous GPS data to asses the quality of the SBAS-InSAR products. ??2009 IEEE.

  19. Rapid Landslide Mapping by Means of Post-Event Polarimetric SAR Imagery

    NASA Astrophysics Data System (ADS)

    Plank, Simon; Martinis, Sandro; Twele, Andre

    2016-08-01

    Rapid mapping of landslides, quickly providing information about the extent of the affected area and type and grade of damage, is crucial to enable fast crisis response. Reviewing the literature shows that most synthetic aperture radar (SAR) data-based landslide mapping procedures use change detection techniques. However, the required very high resolution (VHR) pre-event SAR imagery, acquired shortly before the landslide event, is commonly not available. Due to limitations in onboard disk space and downlink transmission rates modern VHR SAR missions do not systematically cover the entire world. We present a fast and robust procedure for mapping of landslides, based on change detection between freely available and systematically acquired pre-event optical and post-event polarimetric SAR data.

  20. Sentinel-3 SAR Altimetry Toolbox

    NASA Astrophysics Data System (ADS)

    Benveniste, Jerome; Lucas, Bruno; DInardo, Salvatore

    2015-04-01

    The prime objective of the SEOM (Scientific Exploitation of Operational Missions) element is to federate, support and expand the large international research community that the ERS, ENVISAT and the Envelope programmes have build up over the last 20 years for the future European operational Earth Observation missions, the Sentinels. Sentinel-3 builds directly on a proven heritage of ERS-2 and Envisat, and CryoSat-2, with a dual-frequency (Ku and C band) advanced Synthetic Aperture Radar Altimeter (SRAL) that provides measurements at a resolution of ~300m in SAR mode along track. Sentinel-3 will provide exact measurements of sea-surface height along with accurate topography measurements over sea ice, ice sheets, rivers and lakes. The first of the two Sentinels is expected to be launched in early 2015. The current universal altimetry toolbox is BRAT (Basic Radar Altimetry Toolbox) which can read all previous and current altimetry mission's data, but it does not have the capabilities to read the upcoming Sentinel-3 L1 and L2 products. ESA will endeavour to develop and supply this capability to support the users of the future Sentinel-3 SAR Altimetry Mission. BRAT is a collection of tools and tutorial documents designed to facilitate the processing of radar altimetry data. This project started in 2005 from the joint efforts of ESA (European Space Agency) and CNES (Centre National d'Etudes Spatiales), and it is freely available at http://earth.esa.int/brat. The tools enable users to interact with the most common altimetry data formats, the BratGUI is the front-end for the powerful command line tools that are part of the BRAT suite. BRAT can also be used in conjunction with Matlab/IDL (via reading routines) or in C/C++/Fortran via a programming API, allowing the user to obtain desired data, bypassing the data-formatting hassle. BRAT can be used simply to visualise data quickly, or to translate the data into other formats such as netCDF, ASCII text files, KML (Google Earth

  1. Cross-calibration between airborne SAR sensors

    NASA Technical Reports Server (NTRS)

    Zink, Manfred; Olivier, Philippe; Freeman, Anthony

    1993-01-01

    As Synthetic Aperture Radar (SAR) system performance and experience in SAR signature evaluation increase, quantitative analysis becomes more and more important. Such analyses require an absolute radiometric calibration of the complete SAR system. To keep the expenditure on calibration of future multichannel and multisensor remote sensing systems (e.g., X-SAR/SIR-C) within a tolerable level, data from different tracks and different sensors (channels) must be cross calibrated. The 1989 joint E-SAR/DC-8 SAR calibration campaign gave a first opportunity for such an experiment, including cross sensor and cross track calibration. A basic requirement for successful cross calibration is the stability of the SAR systems. The calibration parameters derived from different tracks and the polarimetric properties of the uncalibrated data are used to describe this stability. Quality criteria for a successful cross calibration are the agreement of alpha degree values and the consistency of radar cross sections of equally sized corner reflectors. Channel imbalance and cross talk provide additional quality in case of the polarimetric DC-8 SAR.

  2. A Simple Model for a SARS Epidemic

    ERIC Educational Resources Information Center

    Ang, Keng Cheng

    2004-01-01

    In this paper, we examine the use of an ordinary differential equation in modelling the SARS outbreak in Singapore. The model provides an excellent example of using mathematics in a real life situation. The mathematical concepts involved are accessible to students with A level Mathematics backgrounds. Data for the SARS epidemic in Singapore are…

  3. Development and Validation of New Advanced Ocean Altimetry Products From Cryosat-2 in Conventional and in SAR Mode

    NASA Astrophysics Data System (ADS)

    Cotton, D.; Gommenginger, C.; Andersen, O. B.; Boy, F.; Cancet, M.; Egido, A.; Fernandes, J.; Moreau, T.; Naeije, M.; Garcia, P.; Dinardo, S.; Benveniste, J.

    2013-12-01

    The ESA CryoSat-2 mission is the first space mission to carry a radar altimeter that can operate in Synthetic Aperture Radar (SAR) mode, as well as the more conventional Low Rate Mode (LRM), and also the SAR Interferometric mode (SARIN). Although the prime mission objective of CryoSat-2 is to monitor land and marine ice, the SAR mode capability of the CryoSat-2 SIRAL altimeter also presents the opportunity of demonstrating significant potential benefits of SAR altimetry for ocean applications. Expected performance enhancements of SAR mode include improved range precision, finer along track spatial resolution, and an improved ability to provide measurements close to the coast. The 'Cryosat Plus for Oceans' (CP4O) project is supported by ESA under the Support To Science Element Programme. CP4O started in June 2012, and will continue to June 2014. The objectives of CP4O are: to build a sound scientific basis for new scientific and operational applications of CryoSat-2 data over the open ocean, polar ocean, coastal seas and for sea-floor mapping. to generate and evaluate new methods and products that will enable the full exploitation of the capabilities of the CryoSat-2 SIRAL altimeter, and extend their application beyond the initial mission objectives. to ensure that the scientific return of the CryoSat-2 mission is maximised. This work is being carried out within four sub-themes: Open Ocean Altimetry, Coastal Zone Altimetry, Polar Ocean Altimetry, and Sea Floor Altimetry. In this presentation we provide a detailed assessment of the capability of SAR altimeter data to provide improved oceanographic measurements over the open ocean, coastal ocean and polar ocean. We describe different processing schemes applied to Cryosat-2 SAR mode data, to carry out full resolution SAR processing and SAR mode retracking, and to construct LRM-type altimeter waveforms from the SAR bursts, - so called Reduced SAR mode (RDSAR). The latter processing is important to determine if it is

  4. Understanding bat SARS-like coronaviruses for the preparation of future coronavirus outbreaks - Implications for coronavirus vaccine development.

    PubMed

    Ng, Oi-Wing; Tan, Yee-Joo

    2017-01-02

    The severe acute respiratory syndrome coronavirus (SARS-CoV) first emerged in 2003, causing the SARS epidemic which resulted in a 10% fatality rate. The advancements in metagenomic techniques have allowed the identification of SARS-like coronaviruses (SL-CoVs) sequences that share high homology to the human SARS-CoV epidemic strains from wildlife bats, presenting concrete evidence that bats are the origin and natural reservoir of SARS-CoV. The application of reverse genetics further enabled that characterization of these bat CoVs and the prediction of their potential to cause disease in humans. The knowledge gained from such studies is valuable in the surveillance and preparation of a possible future outbreak caused by a spill-over of these bat SL-CoVs.

  5. SAR processing using SHARC signal processing systems

    NASA Astrophysics Data System (ADS)

    Huxtable, Barton D.; Jackson, Christopher R.; Skaron, Steve A.

    1998-09-01

    Synthetic aperture radar (SAR) is uniquely suited to help solve the Search and Rescue problem since it can be utilized either day or night and through both dense fog or thick cloud cover. Other papers in this session, and in this session in 1997, describe the various SAR image processing algorithms that are being developed and evaluated within the Search and Rescue Program. All of these approaches to using SAR data require substantial amounts of digital signal processing: for the SAR image formation, and possibly for the subsequent image processing. In recognition of the demanding processing that will be required for an operational Search and Rescue Data Processing System (SARDPS), NASA/Goddard Space Flight Center and NASA/Stennis Space Center are conducting a technology demonstration utilizing SHARC multi-chip modules from Boeing to perform SAR image formation processing.

  6. Electromagnetic power absorption and temperature changes due to brain machine interface operation.

    PubMed

    Ibrahim, Tamer S; Abraham, Doney; Rennaker, Robert L

    2007-05-01

    To fully understand neural function, chronic neural recordings must be made simultaneously from 10s or 100s of neurons. To accomplish this goal, several groups are developing brain machine interfaces. For these devices to be viable for chronic human use, it is likely that they will need to be operated and powered externally via a radiofrequency (RF) source. However, RF exposure can result in tissue heating and is regulated by the FDA/FCC. This paper provides an initial estimate of the amount of tissue heating and specific absorption rate (SAR) associated with the operation of a brain-machine interface (BMI). The operation of a brain machine interface was evaluated in an 18-tissue anatomically detailed human head mesh using simulations of electromagnetics and bio-heat phenomena. The simulations were conducted with a single chip, as well as with eight chips, placed on the surface of the human brain and each powered at four frequencies (13.6 MHz, 1.0 GHz, 2.4 GHz, and 5.8 GHz). The simulated chips consist of a wire antenna on a silicon chip covered by a Teflon dura patch. SAR values were calculated using the finite-difference time-domain method and used to predict peak temperature changes caused by electromagnetic absorption in the head using two-dimensional bio-heat equation. Results due to SAR alone show increased heating at higher frequencies, with a peak temperature change at 5.8 GHz of approximately 0.018 degrees C in the single-chip configuration and 0.06 degrees C in the eight-chip configuration with 10 mW of power absorption (in the human head) per chip. In addition, temperature elevations due to power dissipation in the chip(s) were studied. Results show that for the neural tissue, maximum temperature rises of 3.34 degrees C in the single-chip configuration and 7.72 degrees C in the eight-chip configuration were observed for 10 mW dissipation in each chip. Finally, the maximum power dissipation allowable in each chip before a 1.0 degrees C temperature

  7. InSAR and Numeric Modeling for Land Subsidence

    NASA Astrophysics Data System (ADS)

    Wulamu, A.; Grzovic, M.

    2015-12-01

    Monitoring land subsidence due to coal mining is a function of several controlling factors, including: depth of the mine, stratigraphy, presence or absence of faults, thickness of mineral seam, mining method used, and hydrogeological conditions. Numerical modeling, e.g., finite element modeling (FEM), provides a comprehensive tool to simulate three-dimensional deformation at specific locations. The basis of the FEM is the representation of a body or a structure by an assemblage of subdivisions called finite elements, which requires the availability of site specific environmental and physical characteristics. The lack of availability of the necessary data leads to large uncertainties in subsidence estimates. With the use of InSAR, many of the needed controlling parameters for improving mine subsidence rate estimates can be identified. Coupling InSAR with FEM can further improve subsidence rate estimates through additional analysis yielding information on the relative importance of various controlling parameters contributing to the mine subsidence, the key mechanisms of failure associated with these parameters, and the surface expressions of these processes. In this contribution, we show that utilizing InSAR and FEM leads to an overall enhanced understanding of mine behavior, including the physical mechanisms that lead to mine subsidence through understanding the rheological behavior of the material over the mine in response to wide range of physical and environmental conditions.

  8. Rapid subsidence over oil fields measured by SAR

    NASA Technical Reports Server (NTRS)

    Fielding, E. J.; Blom, R. G.; Goldstein, R. M.

    1998-01-01

    The Lost Hills and Belridge oil felds are in the San Joaquin Valley, California. The major oil reservoir is high porosity and low permeability diatomite. Extraction of large volumes from shallow depths causes reduction in pore pressure and subsequent compaction, forming a surface subsidence bowl. We measure this subsidence from space using interferometric analysis of SAR (Synthetic Aperture Radar) data collected by the European Space Agency Remote Sensing Satellites (ERS-1 and ERS-2). Maximum subsidence rates are as high as 40 mm in 35 days or > 400 mm/yr, measured from interferograms with time separations ranging from one day to 26 months. The 8- and 26-month interferograms contain areas where the subsidence gradient exceeds the measurement possible with ERS SAR, but shows increased detail in areas of less rapid subsidence. Synoptic mapping of subsidence distribution from satellite data powerfully complements ground-based techniques, permits measurements where access is difficult, and aids identification of underlying causes.

  9. Forest Information Extraction from Airborne P-Band PolSAR and X-Band InSAR Data

    NASA Astrophysics Data System (ADS)

    Chen, Erxue; Li, Zengyuan; Tian, Xin; Feng, Qi; Zhao, Lei; Li, Lan; Hong, Wen; Pottier, Eric

    2014-11-01

    The key research progress of forest information extraction from high resolution PolSAR/InSAR data acquired by one China airborne system were summarized. Firstly, the airborne campaign activities carried out in 2012, 2013, in China were introduced. Secondly, the key SAR/InSAR data processing steps, such as, InSAR processing, SAR image geocoding terrain correction (GTC),the methods used to derive forest height, forest above ground biomass (AGB)from LiDAR, CCD and ground plots data were described. Finally, we introduced the forest information extraction methods and preliminary validation results from P-band PolSAR data and single baseline X-band InSAR data: (1)Forest height inversion using high resolution X-band InSAR data;(2) Forest AGB estimation using P-band PolSAR data; (3) Forest land cover types classification using PolSAR data.

  10. Forest Information Extraction from Airborne P-Band PolSAR and X-Band InSAR Data

    NASA Astrophysics Data System (ADS)

    Chen, Erxue; Li, Zengyuan; Tian, Xin; Feng, Qi; Zhao, Lei; Li, Lan; Hong, Wen; Pottier, Eric

    2014-11-01

    The key research progress of forest information extraction from high resolution PolSAR/InSAR data acquired by one China airborne system were summarized. Firstly, the airborne campaign activities carried out in 2012, 2013, in China were introduced. Secondly, the key SAR/InSAR data processing steps, such as, InSAR processing, SAR image geocoding terrain correction (GTC), the methods used to derive forest height, forest above ground biomass (AGB) from LiDAR, CCD and ground plots data were described. Finally, we introduced the forest information extraction methods and preliminary validation results from P-band PolSAR data and single baseline X-band InSAR data: (1) Forest height inversion using high resolution X-band InSAR data; (2) Forest AGB estimation using P-band PolSAR data; (3) Forest land cover types classification using PolSAR data.

  11. Dynamic mechanical analysis and high strain-rate energy absorption characteristics of vertically aligned carbon nanotube reinforced woven fiber-glass composites

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The dynamic mechanical behavior and energy absorption characteristics of nano-enhanced functionally graded composites, consisting of 3 layers of vertically aligned carbon nanotube (VACNT) forests grown on woven fiber-glass (FG) layer and embedded within 10 layers of woven FG, with polyester (PE) and...

  12. Validation of burst overlapping for ALOS-2 PALSAR-2 ScanSAR-ScanSAR interferometry

    NASA Astrophysics Data System (ADS)

    Natsuaki, Ryo; Motohka, Takeshi; Ohki, Masato; Watanabe, Manabu; Suzuki, Shinichi

    2016-10-01

    The Phased Array type L-band Synthetic Aperture Radar-2 (PALSAR-2) aboard the Advanced Land Observing Satellite- 2 (ALOS-2, "DAICHI-2") is the latest L-band spaceborne synthetic aperture radar (SAR). PALSAR-2 observes the world mainly with 10 m resolution / 70 km swath Stripmap mode and 25 m resolution / 350 km swath ScanSAR mode. The 3-m resolution Stripmap mode is mainly used upon Japan. 350 km ScanSAR observation could detect large scale deformation e.g., the Mw 7.8 Gorkha, Nepal earthquake and its aftershocks in 2015. ALOS-2 ScanSAR is the first one that supports ScanSAR-ScanSAR interferometry in L-band spaceborne SAR. However, because of the parameter setting error for the orbit estimation, ALOS-2 PALSAR-2 ScanSAR could achieve little number of interferometric pair until the software modification on February 8, 2015. That is, the burst overlap timing required for the interferometric analysis was insufficient and it depends on the observation date. In this paper, we report the investigation results of this case and discuss the current status of the ALOS-2 ScanSAR InSAR. Some archives achieved before February 8, 2015 can be used for interferometric analysis with after Feb. 8. However, most of them have no interferometric pair. We also report that the archives acquired after February 8, have enough burst overlapping.

  13. An application of backprojection for video SAR image formation exploiting a subaperature circular shift register

    NASA Astrophysics Data System (ADS)

    Miller, J.; Bishop, E.; Doerry, A.

    2013-05-01

    This paper details a Video SAR (Synthetic Aperture Radar) mode that provides a persistent view of a scene centered at the Motion Compensation Point (MCP). The radar platform follows a circular flight path. An objective is to form a sequence of SAR images while observing dynamic scene changes at a selectable video frame rate. A formulation of backprojection meets this objective. Modified backprojection equations take into account changes in the grazing angle or squint angle that result from non-ideal flight paths. The algorithm forms a new video frame relying upon much of the signal processing performed in prior frames. The method described applies an appropriate azimuth window to each video frame for window sidelobe rejection. A Cardinal Direction Up (CDU) coordinate frame forms images with the top of the image oriented along a given cardinal direction for all video frames. Using this coordinate frame helps characterize a moving target's target response. Generation of synthetic targets with linear motion including both constant velocity and constant acceleration is described. The synthetic target video imagery demonstrates dynamic SAR imagery with expected moving target responses. The paper presents 2011 flight data collected by General Atomics Aeronautical Systems, Inc. (GA-ASI) implementing the video SAR mode. The flight data demonstrates good video quality showing moving vehicles. The flight imagery demonstrates the real-time capability of the video SAR mode. The video SAR mode uses a circular shift register of subapertures. The radar employs a Graphics Processing Unit (GPU) in order to implement this algorithm.

  14. Moving from Temporal Coherence to Decorrelation Time of Interferometric Measurements Exploiting ESA's SAR Archive

    NASA Astrophysics Data System (ADS)

    Foumelis, Michael; Mitraka, Zina; Cuccu, Roberto; Desnos, Yves-Louis; Engdahl, Marcus

    2015-05-01

    Interferometric coherence can be considered as an expression of temporal decorrelation. It is understood that interferometric coherence decreases with time between SAR acquisitions because of changes in surface reflectivity, reducing the quality of SAR phase measurements. This is an intrinsic characteristic of the design of SAR systems that has a significant contribution at longer time scales. Although in the past there was not sufficient amount of SAR data to extract robust statistical metrics for decorrelation, in the present study it is demonstrated that tailored analysis of interferometric coherence exploiting the large SAR archive available by the European Space Agency (ESA), enables the accurate quantification of temporal decorrelation. A methodology to translate the observed rate of coherence loss into decorrelation times over a volcanic landscape, namely the Santorini volcanic complex is the subject treated in this study. Specifically, a sensitivity analysis was performed on a large data stack of interferometric pairs to quantify at a pixel level the time beyond which the interferometric phase becomes practically unusable due to the effect of decorrelation. Though the dependence of decorrelation on various land cover/use types is already documented the provision of additional information regarding the expected time of decorrelation is of practical use especially when EO data are utilized in operational activities. The performed analysis is viewed within the improved capacity of current and future SAR systems, while underlining the necessity for exploitation of archive data.

  15. Deceptive jamming for countering UWB-SAR based on Doppler frequency phase template of false target

    NASA Astrophysics Data System (ADS)

    He, Xiaodong; Tang, Bin

    2016-04-01

    A false target deceptive jamming method for countering ultra-wideband synthetic aperture radar (UWB-SAR) is proposed in this paper, which is based on dechirp processing to intercepted UWB-SAR signal and inverse dechirp to jamming signal. The jammer quadrature down-converts and dechirps the intercepted UWB-SAR signal using a linear frequency modulation (LFM) signal oscillator, which could reduce the bandwidth and sample rate of analog-to-digital converter. Then, the jammer utilises the azimuth direction Doppler frequency phase between the false target and the jammer, and backward reflection coefficient template to modulate the phase of the intercepted UWB-SAR signal, and then delayed the modulated phase and also modulated the range direction Doppler frequency phase to the that. Finally, the jammer uses LFM signal oscillator to up-convert the narrowband jamming signal in order to recover the bandwidth of the signal. Parameter errors analysis and simulation results have shown that the detected parameters and motion characteristic errors reduce the resolution and offset the expected position of the false target, but it still could obtain an expected false target image. Theoretical analysis and simulation results indicated that the jamming signal proposed in this paper could produce a false target in the UWB-SAR image, which provide a feasible method for countering UWB-SAR in real time.

  16. Updated progress in theories and applications of spaceborne SAR interferometry

    NASA Astrophysics Data System (ADS)

    Chen, Yan-Ling; Huang, Cheng; Ding, Xiao-Li; Li, Zhi-Wei

    2006-12-01

    InSAR (Interferometric Synthetic Aperture Radar) and D-InSAR (Differential InSAR) are rapidly developed new technologies of space geodesy during the late 20th century, and now obviously become hot research topics in the field of microwave remote sensing. Compared with the other sensors, InSAR possesses many incomparable advantages such as the capability to work at all-time and under all weather, very high spatial resolution and strong penetrability through the ground surface. This paper introduces general status of SAR, InSAR, D-InSAR technology, and the principles of InSAR and D-InSAR. New theories and the potential problems of (D-)InSAR technology are largely discussed, including multi-baseline interferometry, Pol-InSAR technique, the correction of atmospheric effects, permanent Scatterers method, the synthesization technique between InSAR and GPS, LIDAR etc., and the InSAR parallel algorithm. Then the new applications of InSAR and D-InSAR are described in detail including 3D topographic mapping, deformation monitoring (including surface subsidence, landside monitoring and ITRF's foundation and maintenance, etc.), thematic mapping (including agriculture and forestry, oceanic surveying and flood monitoring, etc.) and meteorology etc.. Finally, the prospect and future trends in InSAR development are summarized.

  17. Temporal Coherence as an Estimate of Decorrelation Time of SAR Interferometric Measurements

    NASA Astrophysics Data System (ADS)

    Foumelis, Michael

    2014-05-01

    Following a plethora of validations and demonstrations Interferometric SAR (InSAR) has been established as a mature space geodetic technique for providing valuable insights for various phenomena related to geohazards. One of the main advantages of space borne SAR systems with respect to GNSS is the continuous spatial coverage. However, the impact of temporal decorrelation especially in repeat-pass interferometry has been observed during the historical development of InSAR applications. Interferometric coherence is considered as the expression of temporal decorrelation. It is understood that interferometric coherence decreases with time between SAR acquisitions because of changes in surface reflectivity, reducing the accuracy and spatial coverage of SAR phase measurements. This is an intrinsic characteristic of the design of SAR systems that has a significant contribution at longer time scales. Since the majority of geohazards rely on long term observation scenarios, the effect of temporal decorrelation is evident as coherence becomes dominated by temporal changes. Although in the past there was not sufficient amount of SAR data to extract robust statistical metrics, in the present study it is demonstrated that tailored analysis of interferometric coherence by exploiting the large archive of SAR data available by the European Space Agency (ESA), enables the accurate quantification of temporal decorrelation. A methodology to translate the observed rate of coherence loss into decorrelation times over a volcanic landscape is the subject treated in this study. Specifically, a sensitivity analysis based on a large data stack of interferometric pairs in order to quantitatively estimate at a pixel level the time beyond which each interferometric phase becomes practically unusable is presented. The estimation and mapping of the spatial distribution of the temporal decorrelation times in an area without a necessary a priori knowledge of its surface characteristics is a

  18. Antenna motion errors in bistatic SAR imagery

    NASA Astrophysics Data System (ADS)

    Wang, Ling; Yazıcı, Birsen; Cagri Yanik, H.

    2015-06-01

    Antenna trajectory or motion errors are pervasive in synthetic aperture radar (SAR) imaging. Motion errors typically result in smearing and positioning errors in SAR images. Understanding the relationship between the trajectory errors and position errors in reconstructed images is essential in forming focused SAR images. Existing studies on the effect of antenna motion errors are limited to certain geometries, trajectory error models or monostatic SAR configuration. In this paper, we present an analysis of position errors in bistatic SAR imagery due to antenna motion errors. Bistatic SAR imagery is becoming increasingly important in the context of passive imaging and multi-sensor imaging. Our analysis provides an explicit quantitative relationship between the trajectory errors and the positioning errors in bistatic SAR images. The analysis is applicable to arbitrary trajectory errors and arbitrary imaging geometries including wide apertures and large scenes. We present extensive numerical simulations to validate the analysis and to illustrate the results in commonly used bistatic configurations and certain trajectory error models.

  19. Graph mining for SAR transfer series.

    PubMed

    Gupta-Ostermann, Disha; Wawer, Mathias; Wassermann, Anne Mai; Bajorath, Jürgen

    2012-04-23

    The transfer of SAR information from one analog series to another is a difficult, yet highly attractive task in medicinal chemistry. At present, the evaluation of SAR transfer potential from a data mining perspective is still in its infancy. Only recently, a first computational approach has been introduced to evaluate SAR transfer events. Here, a substructure relationship-based molecular network representation has been used as a starting point to systematically identify SAR transfer series in large compound data sets. For this purpose, a methodology is introduced that consists of two stages. For graph mining, an algorithm has been designed that extracts all parallel series from compound data sets. A parallel series is formed by two series of analogs with different core structures but pairwise corresponding substitution patterns. The SAR transfer potential of identified parallel series is then evaluated using a scoring function that emphasizes corresponding potency progression over many analog pairs and large potency ranges. The substructure relationship-based molecular network in combination with the graph mining algorithm currently represents the only generally applicable approach to systematically detect SAR transfer events in large compound data sets. The combined approach has been evaluated on a large number of compound data sets and shown to systematically identify SAR transfer series.

  20. The Alaska SAR processor - Operations and control

    NASA Technical Reports Server (NTRS)

    Carande, Richard E.

    1989-01-01

    The Alaska SAR (synthetic-aperture radar) Facility (ASF) will be capable of receiving, processing, archiving, and producing a variety of SAR image products from three satellite-borne SARs: E-ERS-1 (ESA), J-ERS-1 (NASDA) and Radarsat (Canada). Crucial to the success of the ASF is the Alaska SAR processor (ASP), which will be capable of processing over 200 100-km x 100-km (Seasat-like) frames per day from the raw SAR data, at a ground resolution of about 30 m x 30 m. The processed imagery is of high geometric and radiometric accuracy, and is geolocated to within 500 m. Special-purpose hardware has been designed to execute a SAR processing algorithm to achieve this performance. This hardware is currently undergoing acceptance testing for delivery to the University of Alaska. Particular attention has been devoted to making the operations semi-automated and to providing a friendly operator interface via a computer workstation. The operations and control of the Alaska SAR processor are described.

  1. SAR and LIDAR fusion: experiments and applications

    NASA Astrophysics Data System (ADS)

    Edwards, Matthew C.; Zaugg, Evan C.; Bradley, Joshua P.; Bowden, Ryan D.

    2013-05-01

    In recent years ARTEMIS, Inc. has developed a series of compact, versatile Synthetic Aperture Radar (SAR) systems which have been operated on a variety of small manned and unmanned aircraft. The multi-frequency-band SlimSAR has demonstrated a variety of capabilities including maritime and littoral target detection, ground moving target indication, polarimetry, interferometry, change detection, and foliage penetration. ARTEMIS also continues to build upon the radar's capabilities through fusion with other sensors, such as electro-optical and infrared camera gimbals and light detection and ranging (LIDAR) devices. In this paper we focus on experiments and applications employing SAR and LIDAR fusion. LIDAR is similar to radar in that it transmits a signal which, after being reflected or scattered by a target area, is recorded by the sensor. The differences are that a LIDAR uses a laser as a transmitter and optical sensors as a receiver, and the wavelengths used exhibit a very different scattering phenomenology than the microwaves used in radar, making SAR and LIDAR good complementary technologies. LIDAR is used in many applications including agriculture, archeology, geo-science, and surveying. Some typical data products include digital elevation maps of a target area and features and shapes extracted from the data. A set of experiments conducted to demonstrate the fusion of SAR and LIDAR data include a LIDAR DEM used in accurately processing the SAR data of a high relief area (mountainous, urban). Also, feature extraction is used in improving geolocation accuracy of the SAR and LIDAR data.

  2. Detection of concealed ground targets in CARABAS SAR images using change detection

    NASA Astrophysics Data System (ADS)

    Ulander, Lars M.; Froelind, Per-Olov; Gustavsson, Anders; Hellsten, Hans; Larsson, Bjoern

    1999-08-01

    The paper describes a new method to detect man-made objects hidden under foliage or camouflage. The method is based on change detection and thus multiple revisits of the same area. It uses SAR image data provided by the low-frequency and ultra-wideband CARABAS SAR system which operate in the 20 - 90 MHz frequency range. Experimental results show a drastic reduction in false-alarm rate compared to methods based on single-pass SAR images. Small- to medium-sized trucks are consistently detected with a false-alarm rate of the order of 0.1 - 1 per km2. This level of false-alarm rate is quite sufficient for most military or civilian applications of interest.

  3. Land Subsidence Monitoring Using PS-InSAR Technique for L-Band SAR Data

    NASA Astrophysics Data System (ADS)

    Thapa, S.; Chatterjee, R. S.; Singh, K. B.; Kumar, D.

    2016-10-01

    Differential SAR-Interferometry (D-InSAR) is one of the potential source to measure land surface motion induced due to underground coal mining. However, this technique has many limitation such as atmospheric in homogeneities, spatial de-correlation, and temporal decorrelation. Persistent Scatterer Interferometry synthetic aperture radar (PS-InSAR) belongs to a family of time series InSAR technique, which utilizes the properties of some of the stable natural and anthropogenic targets which remain coherent over long time period. In this study PS-InSAR technique has been used to monitor land subsidence over selected location of Jharia Coal field which has been correlated with the ground levelling measurement. This time series deformation observed using PS InSAR helped us to understand the nature of the ground surface deformation due to underground mining activity.

  4. First Results from an Airborne Ka-band SAR Using SweepSAR and Digital Beamforming

    NASA Technical Reports Server (NTRS)

    Sadowy, Gregory; Ghaemi, Hirad; Hensley, Scott

    2012-01-01

    NASA/JPL has developed SweepSAR technique that breaks typical Synthetic Aperture Radar (SAR) trade space using time-dependent multi-beam DBF on receive. Developing SweepSAR implementation using array-fed reflector for proposed DESDynI Earth Radar Mission concept. Performed first-of-a-kind airborne demonstration of the SweepSAR concept at Ka-band (35.6 GHz). Validated calibration and antenna pattern data sufficient for beam forming in elevation. (1) Provides validation evidence that the proposed Deformation Ecosystem Structure Dynamics of Ice (DESDynI) SAR architecture is sound. (2) Functions well even with large variations in receiver gain / phase. Future plans include using prototype DESDynI SAR digital flight hardware to do the beam forming in real-time onboard the aircraft.

  5. Glucose-dependent insulinotropic polypeptide regulates dipeptide absorption in mouse jejunum.

    PubMed

    Coon, Steven D; Schwartz, John H; Rajendran, Vazhaikkurichi M; Jepeal, Lisa; Singh, Satish K

    2013-11-15

    Glucose-dependent insulinotropic polypeptide (GIP) secreted from jejunal mucosal K cells augments insulin secretion and plays a critical role in the pathogenesis of obesity and Type 2 diabetes mellitus. In recent studies, we have shown GIP directly activates Na-glucose cotransporter-1 (SGLT1) and enhances glucose absorption in mouse jejunum. It is not known whether GIP would also regulate other intestinal nutrient absorptive processes. The present study investigated the effect of GIP on proton-peptide cotransporter-1 (PepT1) that mediates di- and tripeptide absorption as well as peptidomimetic drugs. Immunohistochemistry studies localized both GIP receptor (GIPR) and PepT1 proteins on the basolateral and apical membranes of normal mouse jejunum, respectively. Anti-GIPR antibody detected 50-, 55-, 65-, and 70-kDa proteins, whereas anti-PepT1 detected a 70-kDa proteins in mucosal homogenates of mouse jejunum. RT-PCR analyses established the expression of GIPR- and PepT1-specific mRNA in mucosal cells of mouse jejunum. Absorption of Gly-Sar (a nondigestible dipeptide) measured under voltage-clamp conditions revealed that the imposed mucosal H(+) gradient-enhanced Gly-Sar absorption as an evidence for the presence of PepT1-mediated H(+):Gly-Sar cotransport on the apical membranes of mouse jejunum. H(+):Gly-Sar absorption was completely inhibited by cephalexin (a competitive inhibitor of PepT1) and was activated by GIP. The GIP-activated Gly-Sar absorption was completely inhibited by RP-cAMP (a cAMP antagonist). In contrast to GIP, the ileal L cell secreting glucagon-like peptide-1 (GLP-1) did not affect the H(+):Gly-Sar absorption in mouse jejunum. We conclude from these observations that GIP, but not GLP-1, directly activates PepT1 activity by a cAMP-dependent signaling pathway in jejunum.

  6. Primary studies of Chinese spaceborne SAR

    NASA Technical Reports Server (NTRS)

    Wang, Zhen-Song; Wu, Guo-Xiang; Guo, Hua-Dong; Wei, Zhong-Quan; Zhu, Min-Hui

    1993-01-01

    The primary studies on spaceborne synthetic aperture radar (SAR) in China are discussed. The SAR will be launched aboard a Chinese satellite and operated at L-band with HH polarization. The purpose of the mission in consideration is dedicated to resources and environment uses, especially to natural disaster monitoring. The ground resolution is designed as 25 m x 25 m for detailed mode and 100 m x 100 m for wide scan-SAR mode. The off-nadir angle can be varied from 20 to 40 deg. The key system concepts are introduced.

  7. NASA/JPL Aircraft SAR Workshop Proceedings

    NASA Technical Reports Server (NTRS)

    Donovan, N. (Editor); Evans, D. L. (Editor); Held, D. N. (Editor)

    1985-01-01

    Speaker-supplied summaries of the talks given at the NASA/JPL Aircraft SAR Workshop on February 4 and 5, 1985, are provided. These talks dealt mostly with composite quadpolarization imagery from a geologic or ecologic prespective. An overview and summary of the system characteristics of the L-band synthetic aperture radar (SAR) flown on the NASA CV-990 aircraft are included as supplementary information. Other topics ranging from phase imagery and interferometric techniques classifications of specific areas, and the potentials and limitations of SAR imagery in various applications are discussed.

  8. SAR observations of coastal zone conditions

    NASA Technical Reports Server (NTRS)

    Meadows, G. A.; Kasischke, E. S.; Shuchman, R. A.

    1980-01-01

    Applications of Synthetic Aperture Radar (SAR) technology to the observation of coastal zones phenomena are detailed. The conditions observed include gravity wave detection, surf zone location, surface currents, and long-period 'surf beats'. Algorithms have been developed and successfully tested that determine significant wave and current parameters from the sea surface backscatter of microwave energy. Doppler information from the SAR optical correlator allows a rough estimation of near shore surface flow velocities that has been found in agreement with both theory and in situ observations as well. Seasat SAR data of the Scotland and North Carolina coasts are considered, as well as the results of bathymetric updating of coastal area charts.

  9. Imaging of Ocean Waves by SAR

    DTIC Science & Technology

    1988-01-01

    SAR o Contract N00014-87-C-0687N TDTIC R.L. Schult iZ L E C T E F.S. Henyey -JAN 2 4 1989 J.A. Wright Center for Studies of Nonlinear Dynamics La...Waves by SAR R.L. Schult F.S. Henyey J.A. Wright Center for Studies of Nonlinear Dynamics La Jolla Institute 7855 Fay Avenue, Suite 320 La Jolla...TOWARD data. 467.abstract 7-13-󈨜 Imaging of Ocean Waves by SAR 1. Introduction Synthetic Aperture Radar images of long-wavelength features on the

  10. Segmentation Of Multifrequency, Multilook SAR Data

    NASA Technical Reports Server (NTRS)

    Rignot, Eric J.; Kwok, Ronald; Chellappa, Rama

    1993-01-01

    Segmentation of multifrequency, multilook synthetic-aperture radar (SAR) image intensity data into regions, within each of which backscattering characteristics of target scene considered homogeneous, enhanced by use of two statistical models. One represents statistics of multifrequency, multilook speckled intensities of SAR picture elements; other represents statistics of labels applied to regions into which picture elements grouped. Each region represents different type of terrain, terrain cover, or other surface; e.g., forest, agricultural land, sea ice, or water. Segmentation of image into regions of neighboring picture elements accomplished by method similar to that described in "Algorithms For Segmentation Of Complex-Amplitude SAR Data" (NPO-18524).

  11. Cascades of InSAR in the Cascades - outlook for the use of InSAR and space-based imaging catalogues in a Subduction Zone Observatory

    NASA Astrophysics Data System (ADS)

    Lohman, R. B.

    2015-12-01

    Interferometric synthetic aperture radar (InSAR) has long demonstrated its utility to studies of subduction zone earthquakes, crustal events and volcanic processes, particularly in regions with very good temporal data coverage (e.g., Japan), or arid regions where the timescale of surface change is long compared to the repeat time of the available SAR imagery (e.g., portions of South America). Recently launched and future SAR missions with open data access will increase the temporal sampling rates further over many areas of the globe, resulting in a new ability to lower the detection threshold for earthquakes and, potentially, interseismic motion and transients associated with subduction zone settings. Here we describe some of the anticipated detection abilities for events ranging from earthquakes and slow slip along the subduction zone interface up to landslides, and examine the variations in land use around the circum-Pacific and how that and its changes over time will affect the use of InSAR. We will show the results of an effort to combine Landsat and other optical imagery with SAR data catalogues in the Pacific Northwest to improve the characterization of ground deformation signals, including the identification of "spurious" signals that are not related to true ground deformation. We also describe prospects for working with other communities that are interested in variations in soil moisture and vegetation structure over the same terrain.

  12. Comparison of alternative parameters to dual polarimetric SAR data

    NASA Astrophysics Data System (ADS)

    Sugimoto, Mitsunobu; Ouchi, Kazuo

    2012-09-01

    The goal of this study is to examine the potential of deriving information comparable to quad-polarization synthetic aperture radar (SAR) data from dual-polarization data. Multi-polarization data have shown the potential to increase further the ability of extracting physical quantities of observation targets. Above all, quad-polarization data have more information than others, but they are relatively few in number compared with single or dual-polarization data. Although there are many SAR systems capable of quad-polarization observation, most of them are operated mainly on single or dual-polarization mode because of limited data transfer rate, area of coverage, required resolution, other system restriction, and so on. Thus, there is a certain trade- off between data availability and multi polarization. Therefore, we focused on dual-polarization as a good compromise between single and quad-polarization data. In this study, we investigated possible alternative parameters that can be derived from HH-VV dual-polarization data and can serve as substitutes for cross-polarization component in quad-polarization data. Experiments are performed using the Advanced Land Observation Satellite-Phased Array L-band SAR (ALOS-PALSAR) quad-polarization data. The cross polarization component in the data is used as benchmark for the alternative parameters.

  13. Feature preserving compression of high resolution SAR images

    NASA Astrophysics Data System (ADS)

    Yang, Zhigao; Hu, Fuxiang; Sun, Tao; Qin, Qianqing

    2006-10-01

    Compression techniques are required to transmit the large amounts of high-resolution synthetic aperture radar (SAR) image data over the available channels. Common Image compression methods may lose detail and weak information in original images, especially at smoothness areas and edges with low contrast. This is known as "smoothing effect". It becomes difficult to extract and recognize some useful image features such as points and lines. We propose a new SAR image compression algorithm that can reduce the "smoothing effect" based on adaptive wavelet packet transform and feature-preserving rate allocation. For the reason that images should be modeled as non-stationary information resources, a SAR image is partitioned to overlapped blocks. Each overlapped block is then transformed by adaptive wavelet packet according to statistical features of different blocks. In quantifying and entropy coding of wavelet coefficients, we integrate feature-preserving technique. Experiments show that quality of our algorithm up to 16:1 compression ratio is improved significantly, and more weak information is reserved.

  14. The Compound and Homologous Eruptions from the SAR 11429

    NASA Astrophysics Data System (ADS)

    Dhakal, Suman Kumar; Zhang, Jie

    2016-05-01

    Super Active Regions (SARs) are ARs which shows extremely high rate of solar eruptions. NOAA AR 11429 was a SAR which produced 47 C-Class, 15 M-Class and 3 X-Class flares and 8 CMEs during its passage from the front disk of the Sun. This SAR had anti-Hale and delta-spot magnetic configuration and many sub-regions of magnetic flux emergence. With the aid of multi-wavelength observations of the Solar Dynamics Observatory (SDO), the Solar Terrestrial Relations Observatory (STEREO) and nonlinear force-free model for the magnetic field in the solar corona, we found the existence of many magnetic flux structures (flux bundles) in the corona of the AR. The energy released by these co-existing flux bundles within short time, resulted in compound erutpions from the AR on March 9 and 10, 2012. In the period of 38 hours, after the CME eruption on March 9, the continuous shearing and cancellation and new magnetic flux emergence resulted in another CME on March 10. Both of the events showed the compound nature and the similarity of the foot-points and EUV dimming made these eruptions homologous.

  15. Atmosphere Observations by Geosynchronous SARs

    NASA Astrophysics Data System (ADS)

    Monti guarnieri, Andrea; Rocca, Fabio; Wadge, Geoff; Schulz, Detlef

    2014-05-01

    We analyze different geosynchronous Synthetic Aperture RADAR concepts aimed to get both tropospheric and ionospheric delay maps with a revisit time of minutes and sub-continental coverage. Such products could be used either to compensate the delay in LEO-SAR missions and GNSS, or to generate integrated water-vapor maps to be used for Numerical Weather Forecast. The system exploits the principle of RADAR location, by transmitting a pulse with a suitable bandwidth, and the residual non-zero eccentricity of COMmunication SATellites. Different concepts are proposed as payload in COMSAT, or constellations of small satellites, that is monostatic or bistatic/multistatic RADARS. The selection of the best frequency, from L to Ku, and the analysis of performances is presented.

  16. The influence of the reflective environment on the absorption of a human male exposed to representative base station antennas from 300 MHz to 5 GHz.

    PubMed

    Vermeeren, G; Gosselin, M C; Kühn, S; Kellerman, V; Hadjem, A; Gati, A; Joseph, W; Wiart, J; Meyer, F; Kuster, N; Martens, L

    2010-09-21

    The environment is an important parameter when evaluating the exposure to radio-frequency electromagnetic fields. This study investigates numerically the variation on the whole-body and peak spatially averaged-specific absorption rate (SAR) in the heterogeneous virtual family male placed in front of a base station antenna in a reflective environment. The SAR values in a reflective environment are also compared to the values obtained when no environment is present (free space). The virtual family male has been placed at four distances (30 cm, 1 m, 3 m and 10 m) in front of six base station antennas (operating at 300 MHz, 450 MHz, 900 MHz, 2.1 GHz, 3.5 GHz and 5.0 GHz, respectively) and in three reflective environments (a perfectly conducting wall, a perfectly conducting ground and a perfectly conducting ground + wall). A total of 72 configurations are examined. The absorption in the heterogeneous body model is determined using the 3D electromagnetic (EM) finite-difference time-domain (FDTD) solver Semcad-X. For the larger simulations, requirements in terms of computer resources are reduced by using a generalized Huygens' box approach. It has been observed that the ratio of the SAR in the virtual family male in a reflective environment and the SAR in the virtual family male in the free-space environment ranged from -8.7 dB up to 8.0 dB. A worst-case reflective environment could not be determined. ICNIRP reference levels not always showed to be compliant with the basic restrictions.

  17. Coastal and Wetlands Applications for an InSAR Mission

    NASA Astrophysics Data System (ADS)

    Dixon, T.; Amelung, F.; Gourmelen, N.; Kim, S.; Osmanoglu, B.; Wdowinski, S.

    2006-12-01

    Interferometric Synthetic Aperture Radar (InSAR) has found wide application in the study of Earth surface change, including earthquake and volcano deformation, motion of glaciers and ice sheets, and ground subsidence due to fluid extraction. In the last few years, InSAR may have significant application in studies of wetlands, coastal regions, and related environmental problems. These are becoming increasingly important as global warming contributes to sea level rise, with consequent modification or loss of coastal habitat, and increased storm frequency/intensity, with consequent increased hazard to coastal communities. Most of these applications would benefit from increased data availability and spatial resolution. A common problem for many InSAR studies in these areas is the influence of spatially and temporally variable tropospheric water vapor. Multiple interferograms can be used to average down tropospheric noise, or selectively edit image pairs where tropospheric noise is high. Alternately, the Permanent Scatterer (PSInSAR) technique can produce an average surface change rate over several months or years for coastal land applications where the assumption of steady state deformation is reasonable (e.g., some land subsidence applications). This technique also effectively identifies tropospheric noise. Common to both approaches is the need for large numbers of images, closely spaced in time. Wetland water levels also change on short time scales (days to weeks) implying the need for frequent coverage. Hence, such applications benefit from mission scenarios emphasizing repeat times shorter than 7 days. Assuming global coverage is desirable, the requirement for rapid re-survey suggests that multi-satellite constellations should be considered.

  18. Effect of carbachol on intestinal mucosal blood flow, activity of Na+-K+-ATPase, expression of aquaporin-1, and intestinal absorption rate during enteral resuscitation of burn shock in rats.

    PubMed

    Bao, Chengmei; Hu, Sen; Zhou, Guoyong; Tian, Yijun; Wu, Yan; Sheng, Zhiyong

    2010-01-01

    We investigated the effect of carbachol (CAR, a cholinergic agent) on intestinal mucosal blood flow (IMBF), activity of Na-K-ATPase, expression of aquaporin (AQP)-1, and intestinal absorption rate during enteral resuscitation of a 35%TBSA scald in rats with a glucose electrolyte solution (GES). One hundred male Wistar rats were randomly divided into five groups: sham scald (N group); scald without fluid resuscitation (S group); scald resuscitated with enteral GES alone (GES group); scald resuscitated with enteral CAR alone (CAR group); and scald resuscitated with enteral CAR plus GES (GES/CAR group). The rats were inflicted 35%TBSA third degree of scald injury on the back with boiling water (100 degrees C, 15 seconds) in all groups, except the sham scald group. A catheter was inserted into the proximal duodenum (5 cm distal to pylorus) and distal ileum (5 cm proximal to cecum), of each rats through laparotomy, thus a segment of intestine was virtually isolated to form a loop for inlet and outlet of introduced fluid. In N, GES, and GES/CAR groups, fluids were introduced 30 minutes after scald injury. The speed of fluid infusion was 4 ml/kg/1%TBSA for 4 hours. CAR (60 microg/kg) was injected into the intestinal lumen at 30-minute after injury in CAR and GES/CAR groups. At 2 and 4 hours after scald, intestinal absorption rate of water and Na, and IMBF were determined, respectively. Then, animals were killed, and specimens of intestinal tissue were obtained for the determination of the activity of Na-K-ATPase, hematoxylin-eosin coloring, and expression of AQP-1. The intestinal absorption rate was reduced markedly in GES group compared with sham scald group at 2 and 4 hours after scald, and absorption rate of small intestine in GES/CAR was significantly higher than that in GES group (P < .05). It was also found that there was significant decrease in IMBF, activity of Na-K-ATPase, and expression of AQP-1 in scald group compared with the sham group. However, in GES

  19. Combined DEM Extration Method from StereoSAR and InSAR

    NASA Astrophysics Data System (ADS)

    Zhao, Z.; Zhang, J. X.; Duan, M. Y.; Huang, G. M.; Yang, S. C.

    2015-06-01

    A pair of SAR images acquired from different positions can be used to generate digital elevation model (DEM). Two techniques exploiting this characteristic have been introduced: stereo SAR and interferometric SAR. They permit to recover the third dimension (topography) and, at the same time, to identify the absolute position (geolocation) of pixels included in the imaged area, thus allowing the generation of DEMs. In this paper, StereoSAR and InSAR combined adjustment model are constructed, and unify DEM extraction from InSAR and StereoSAR into the same coordinate system, and then improve three dimensional positioning accuracy of the target. We assume that there are four images 1, 2, 3 and 4. One pair of SAR images 1,2 meet the required conditions for InSAR technology, while the other pair of SAR images 3,4 can form stereo image pairs. The phase model is based on InSAR rigorous imaging geometric model. The master image 1 and the slave image 2 will be used in InSAR processing, but the slave image 2 is only used in the course of establishment, and the pixels of the slave image 2 are relevant to the corresponding pixels of the master image 1 through image coregistration coefficient, and it calculates the corresponding phase. It doesn't require the slave image in the construction of the phase model. In Range-Doppler (RD) model, the range equation and Doppler equation are a function of target geolocation, while in the phase equation, the phase is also a function of target geolocation. We exploit combined adjustment model to deviation of target geolocation, thus the problem of target solution is changed to solve three unkonwns through seven equations. The model was tested for DEM extraction under spaceborne InSAR and StereoSAR data and compared with InSAR and StereoSAR methods respectively. The results showed that the model delivered a better performance on experimental imagery and can be used for DEM extraction applications.

  20. Precise SAR measurements in the near-field of RF antenna systems

    NASA Astrophysics Data System (ADS)

    Hakim, Bandar M.

    Wireless devices must meet specific safety radiation limits, and in order to assess the health affects of such devices, standard procedures are used in which standard phantoms, tissue-equivalent liquids, and miniature electric field probes are used. The accuracy of such measurements depend on the precision in measuring the dielectric properties of the tissue-equivalent liquids and the associated calibrations of the electric-field probes. This thesis describes work on the theoretical modeling and experimental measurement of the complex permittivity of tissue-equivalent liquids, and associated calibration of miniature electric-field probes. The measurement method is based on measurements of the field attenuation factor and power reflection coefficient of a tissue-equivalent sample. A novel method, to the best of the authors knowledge, for determining the dielectric properties and probe calibration factors is described and validated. The measurement system is validated using saline at different concentrations, and measurements of complex permittivity and calibration factors have been made on tissue-equivalent liquids at 900MHz and 1800MHz. Uncertainty analysis have been conducted to study the measurement system sensitivity. Using the same waveguide to measure tissue-equivalent permittivity and calibrate e-field probes eliminates a source of uncertainty associated with using two different measurement systems. The measurement system is used to test GSM cell-phones at 900MHz and 1800MHz for Specific Absorption Rate (SAR) compliance using a Specific Anthropomorphic Mannequin phantom (SAM).

  1. Statistical modeling of SAR images: a survey.

    PubMed

    Gao, Gui

    2010-01-01

    Statistical modeling is essential to SAR (Synthetic Aperture Radar) image interpretation. It aims to describe SAR images through statistical methods and reveal the characteristics of these images. Moreover, statistical modeling can provide a technical support for a comprehensive understanding of terrain scattering mechanism, which helps to develop algorithms for effective image interpretation and creditable image simulation. Numerous statistical models have been developed to describe SAR image data, and the purpose of this paper is to categorize and evaluate these models. We first summarize the development history and the current researching state of statistical modeling, then different SAR image models developed from the product model are mainly discussed in detail. Relevant issues are also discussed. Several promising directions for future research are concluded at last.

  2. Enhanced SAR Data Compressor for Sentinel-1

    NASA Astrophysics Data System (ADS)

    Algra, T.; Bierens, L.

    2007-08-01

    This paper presents a new on-board SAR data compressor which outperforms the conventionally used Block Adaptive Quantization (BAQ) compressor. The system applies improved entropy-constrained block adaptive quantization of raw Synthetic Aperture Radar (SAR) data in the frequency domain. For advanced multi-mode satellite SAR instruments, such as the one to be implemented on-board of Sentinel- , the average compression ratio can be doubled as compared to BAQ. Space borne implementation with a high-speed data throughput is feasible due to the advent of advanced space FPGA's and ASIC's including the powerFFT, a fast FFT-oriented DSP. The complete compressor module can be implemented on a 6U Eurocard that fits in the SAR Electronics System crate of Sentinel-1.

  3. Tracking ocean wave spectrum from SAR images

    NASA Technical Reports Server (NTRS)

    Goldfinger, A. D.; Beal, R. C.; Monaldo, F. M.; Tilley, D. G.

    1984-01-01

    An end to end algorithm for recovery of ocean wave spectral peaks from Synthetic Aperture Radar (SAR) images is described. Current approaches allow precisions of 1 percent in wave number, and 0.6 deg in direction.

  4. Formation Flying for Distributed InSAR

    NASA Technical Reports Server (NTRS)

    Scharf, Daniel P.; Murray, Emmanuell A.; Ploen, Scott R.; Gromov, Konstantin G.; Chen, Curtis W.

    2006-01-01

    We consider two spacecraft flying in formation to create interferometric synthetic aperture radar (InSAR). Several candidate orbits for such in InSar formation have been previously determined based on radar performance and Keplerian orbital dynamics. However, with out active control, disturbance-induced drift can degrade radar performance and (in the worst case) cause a collision. This study evaluates the feasibility of operating the InSAR spacecraft as a formation, that is, with inner-spacecraft sensing and control. We describe the candidate InSAR orbits, design formation guidance and control architectures and algorithms, and report the (Delta)(nu) and control acceleration requirements for the candidate orbits for several tracking performance levels. As part of determining formation requirements, a formation guidance algorithm called Command Virtual Structure is introduced that can reduce the (Delta)(nu) requirements compared to standard Leader/Follower formation approaches.

  5. Polarimetric SAR Interferometry Evaluation in Mangroves

    NASA Technical Reports Server (NTRS)

    Lee, Seung-Kuk; Fatoyinbo,Temilola; Osmanoglu, Batuhan; Sun, Guoqing

    2014-01-01

    TanDEM-X (TDX) enables to generate an interferometric coherence without temporal decorrelation effect that is the most critical factor for a successful Pol-InSAR inversion, as have recently been used for forest parameter retrieval. This paper presents mangrove forest height estimation only using single-pass/single-baseline/dual-polarization TDX data by means of new dual-Pol-InSAR inversion technique. To overcome a lack of one polarization in a conventional Pol- InSAR inversion (i.e. an underdetermined problem), the ground phase in the Pol-InSAR model is directly estimated from TDX interferograms assuming flat underlying topography in mangrove forest. The inversion result is validated against lidar measurement data (NASA's G-LiHT data).

  6. SAR/LANDSAT image registration study

    NASA Technical Reports Server (NTRS)

    Murphrey, S. W. (Principal Investigator)

    1978-01-01

    The author has identified the following significant results. Temporal registration of synthetic aperture radar data with LANDSAT-MSS data is both feasible (from a technical standpoint) and useful (from an information-content viewpoint). The greatest difficulty in registering aircraft SAR data to corrected LANDSAT-MSS data is control-point location. The differences in SAR and MSS data impact the selection of features that will serve as a good control points. The SAR and MSS data are unsuitable for automatic computer correlation of digital control-point data. The gray-level data can not be compared by the computer because of the different response characteristics of the MSS and SAR images.

  7. SAR Ambiguity Study for the Cassini Radar

    NASA Technical Reports Server (NTRS)

    Hensley, Scott; Im, Eastwood; Johnson, William T. K.

    1993-01-01

    The Cassini Radar's synthetic aperture radar (SAR) ambiguity analysis is unique with respect to other spaceborne SAR ambiguity analyses owing to the non-orbiting spacecraft trajectory, asymmetric antenna pattern, and burst mode of data collection. By properly varying the pointing, burst mode timing, and radar parameters along the trajectory this study shows that the signal-to-ambiguity ratio of better than 15 dB can be achieved for all images obtained by the Cassini Radar.

  8. SARS: Down But Still a Threat

    DTIC Science & Technology

    2003-08-01

    economic and political impact. • Although SARS has killed far fewer people than die each year from more common maladies such as pneumonia, influenza...is not necessarily authoritative. DI Cartography Center/MPG 764135AI 8-03 All of these diseases, except cholera , dengue, and diphtheria, are... Cholera O1 Dengue/Dengue Hemorrhagic Fever Cholera O139 Dengue 9 Discussion SARS: Down But Still a Threat The Global Health Challenge

  9. Introduction to Synthetic Aperture Radar (SAR)

    DTIC Science & Technology

    2006-09-01

    Lynx 1999 10 cm × 10 cm Ku MISAR 2003 0.5 m × 0.5 m Ka RAMSES 1994 10 cm × 10 cm P,L,S,C,X,Ku,Ka,W MEMPHIS 1997 20 cm × 20 cm Ka,W E-SAR 1994 1.5...Bamler, I. G. Cumming and F. H. Wong , Precision SAR processing using chirp scaling, IEEE Transactions on Geoscience and Remote Sensing, Vol. 32, No. 4

  10. Classification Of Terrain In Polarimetric SAR Images

    NASA Technical Reports Server (NTRS)

    Van Zyl, Jakob J.; Kong, Jin A.; Shin, Robert T.; Lim, Harold; Swartz, Albert; Yueh, Simon H.

    1993-01-01

    Two algorithms processing polarimetric synthetic-aperture-radar data found effective in assigning various parts of SAR images to classes representing different types of terrain. Partially automate interpretation of SAR imagery, reducing amount of photointerpretation needed and putting whole interpretation process on more quantitative and systematic basis. First algorithm implements Bayesian classification scheme "supervised" by use of training data. Second algorithm implements classification procedure unsupervised.

  11. Bacteriorhodopsin Film For Processing SAR Signals

    NASA Technical Reports Server (NTRS)

    Yu, Jeffrey W.; Chao, Tien-Hsin; Margalit, Ruth; Cheng, Li-Jen

    1992-01-01

    "Instant" photographic film based on semisynthetic retinal pigment bacteriorhodopsin proposed for optical processing of synthetic-aperture-radar (SAR) signals. Input image recorded on film by laser operating at writing wavelength of bacteriorhodopsin, and output image recorded on computer by standard frame-grabber. Because it requires no chemical development, enables processing in nearly real time. Fast response and high resolution well suited for application. Film reusable, with concomitant reduction in cost of SAR processing.

  12. PERITONEAL ABSORPTION

    PubMed Central

    Hahn, P. F.; Miller, L. L.; Robscheit-Robbins, F. S.; Bale, W. F.; Whipple, G. H.

    1944-01-01

    The absorption of red cells from the normal peritoneum of the dog can be demonstrated by means of red cells labeled with radio-iron incorporated in the hemoglobin of these red cells. Absorption in normal dogs runs from 20 to 100 per cent of the amount given within 24 hours. Dogs rendered anemic by bleeding absorb red cells a little less rapidly—ranging from 5 to 80 per cent of the injected red cells. Doubly depleted dogs (anemic and hypoproteinemic) absorb even less in the three experiments recorded. This peritoneal absorption varies widely in different dogs and even in the same dog at different times. We do not know the factors responsible for these variations but there is no question about active peritoneal absorption. The intact red cells pass readily from the peritoneal cavity into lymph spaces in diaphragm and other areas of the peritoneum. The red cells move along the lymphatics and through the lymph glands with little or no phagocytosis and eventually into the large veins through the thoracic ducts. PMID:19871404

  13. Nutrient absorption.

    PubMed

    Rubin, Deborah C

    2004-03-01

    Our understanding of nutrient absorption continues to grow, from the development of unique animal models and from studies in which cutting-edge molecular and cellular biologic approaches have been used to analyze the structure and function of relevant molecules. Studies of the molecular genetics of inherited disorders have also provided many new insights into these processes. A major advance in lipid absorption has been the cloning and characterization of several intestinal acyl CoA:monoacylglycerol acyltransferases; these may provide new targets for antiobesity drug therapy. Studies of intestinal cholesterol absorption and reverse cholesterol transport have encouraged the development of novel potential treatments for hyperlipidemia. Observations in genetically modified mice and in humans with mutations in glucose transporter 2 suggest the importance of a separate microsomal membrane transport pathway for glucose transport. The study of iron metabolism has advanced greatly with the identification of the hemochromatosis gene and the continued examination of the genetic regulation of iron absorptive pathways. Several human thiamine transporters have been identified, and their specific roles in different tissues are being explored.

  14. SAR versus S(inc): What is the appropriate RF exposure metric in the range 1-10 GHz? Part II: Using complex human body models.

    PubMed

    McIntosh, Robert L; Anderson, Vitas

    2010-09-01

    This is the second of the two articles that present modeling data and reasoned arguments for specifying the appropriate crossover frequency at which incident power flux density (S(inc)) replaces the peak 10 g averaged value of the specific energy absorption rate (SAR) as the designated basic restriction for protecting against radiofrequency electromagnetic heating effects in the 1-10 GHz range. In our first study, we compared the degree of correlation between these basic restrictions and the peak-induced tissue temperature rise (DeltaT) for a representative range of population/exposure scenarios using simple multi-planar models exposed to plane wave conditions. In this complementary study, complex heterogeneous head models for an adult and 12-year-old child were analyzed at 1, 3, 6, 8, and 10 GHz for a variety of exposure conditions. The complex models indicate that peak DeltaT is better correlated with peak 10 g SAR than S(inc) at 1 and 3 GHz and with S(inc) at 6-10 GHz, in contrast to the results from Part I. Considering the planar and complex body modeling results together, and given the equivocal indications of the two metrics in the 6-10 GHz range, we recommend that the breakpoint be set at 6 GHz. This choice is also based on other considerations such as ease of assessment. We also recommend that the limit level of S(inc) should be adjusted to provide a better match with 10 g SAR in the induced tissue temperature rise.

  15. Optimization of a DNA vaccine against SARS.

    PubMed

    Zakhartchouk, Alexander N; Viswanathan, Sathiyanarayanan; Moshynskyy, Igor; Petric, Martin; Babiuk, Lorne A

    2007-10-01

    Severe acute respiratory syndrome coronavirus (SARS-CoV) first appeared in Southern China in November 2002, and then quickly spread to 33 countries on five continents along international air travel routes. Although the SARS epidemic has been contained, there is a clear need for a safe and effective vaccine should an outbreak of a SARS-CoV infection reappear in human population. In this study, we tested four DNA-vaccine constructs: (1) pLL70, containing cDNA for the SARS-CoV spike (S) gene; (2) pcDNA-SS, containing codon-optimized S gene for SARS-CoV S protein (residues 12-1255) fused with a leader sequence derived from the human CD5 gene; (3) pcDNA-St, containing the gene encoding the N-portion of the codon-optimized S gene (residues 12-532) with the CD5 leader sequence; (4) pcDNA-St-VP22C, containing the gene encoding the N-portion of the codon-optimized S protein with the CD5 leader sequence fused with the C-terminal 138 amino acids of the bovine herpesvirus-1 (BHV-1) major tegument protein VP22. Each of these plasmids was intradermally administered to C57BL/6 mice in three separate immunizations. Analysis of humoral and cellular immune responses in immunized mice demonstrated that pcDNA-SS and pcDNA-St-VP22C are the most immunogenic SARS vaccine candidates.

  16. SARS: Key factors in crisis management.

    PubMed

    Tseng, Hsin-Chao; Chen, Thai-Form; Chou, Shieu-Ming

    2005-03-01

    This study was conducted at a single hospital selected in Taipei during the SARS (Severe Acute Respiratory Syndrome) outbreak from March to July, 2003 in Taiwan. During this period of time, 104 SARS patients were admitted to the hospital. There were no negative reports related to the selected hospital despite its being located right in the center of an area struck by the epidemic. The purpose of this study was to identify the key factors enabling the hospital to survive SARS unscathed. Data were collected from in-depth interviews with the nursing directors and nursing managers of the SARS units, along with a review of relevant hospital documents. The five key elements identified as survival factors during this SARS crisis are as follows: 1. good control of timing for crisis management, 2. careful decision-making, 3. thorough implementation, 4. effective communication, and 5. trust between management and employees. The results of this study reconfirmed the selected hospital as a model for good crisis management during the SARS epidemic.

  17. Ionospheric Specifications for SAR Interferometry (ISSI)

    NASA Technical Reports Server (NTRS)

    Pi, Xiaoqing; Chapman, Bruce D; Freeman, Anthony; Szeliga, Walter; Buckley, Sean M.; Rosen, Paul A.; Lavalle, Marco

    2013-01-01

    The ISSI software package is designed to image the ionosphere from space by calibrating and processing polarimetric synthetic aperture radar (PolSAR) data collected from low Earth orbit satellites. Signals transmitted and received by a PolSAR are subject to the Faraday rotation effect as they traverse the magnetized ionosphere. The ISSI algorithms combine the horizontally and vertically polarized (with respect to the radar system) SAR signals to estimate Faraday rotation and ionospheric total electron content (TEC) with spatial resolutions of sub-kilometers to kilometers, and to derive radar system calibration parameters. The ISSI software package has been designed and developed to integrate the algorithms, process PolSAR data, and image as well as visualize the ionospheric measurements. A number of tests have been conducted using ISSI with PolSAR data collected from various latitude regions using the phase array-type L-band synthetic aperture radar (PALSAR) onboard Japan Aerospace Exploration Agency's Advanced Land Observing Satellite mission, and also with Global Positioning System data. These tests have demonstrated and validated SAR-derived ionospheric images and data correction algorithms.

  18. Accelerating Spaceborne SAR Imaging Using Multiple CPU/GPU Deep Collaborative Computing.

    PubMed

    Zhang, Fan; Li, Guojun; Li, Wei; Hu, Wei; Hu, Yuxin

    2016-04-07

    With the development of synthetic aperture radar (SAR) technologies in recent years, the huge amount of remote sensing data brings challenges for real-time imaging processing. Therefore, high performance computing (HPC) methods have been presented to accelerate SAR imaging, especially the GPU based methods. In the classical GPU based imaging algorithm, GPU is employed to accelerate image processing by massive parallel computing, and CPU is only used to perform the auxiliary work such as data input/output (IO). However, the computing capability of CPU is ignored and underestimated. In this work, a new deep collaborative SAR imaging method based on multiple CPU/GPU is proposed to achieve real-time SAR imaging. Through the proposed tasks partitioning and scheduling strategy, the whole image can be generated with deep collaborative multiple CPU/GPU computing. In the part of CPU parallel imaging, the advanced vector extension (AVX) method is firstly introduced into the multi-core CPU parallel method for higher efficiency. As for the GPU parallel imaging, not only the bottlenecks of memory limitation and frequent data transferring are broken, but also kinds of optimized strategies are applied, such as streaming, parallel pipeline and so on. Experimental results demonstrate that the deep CPU/GPU collaborative imaging method enhances the efficiency of SAR imaging on single-core CPU by 270 times and realizes the real-time imaging in that the imaging rate outperforms the raw data generation rate.

  19. Accelerating Spaceborne SAR Imaging Using Multiple CPU/GPU Deep Collaborative Computing

    PubMed Central

    Zhang, Fan; Li, Guojun; Li, Wei; Hu, Wei; Hu, Yuxin

    2016-01-01

    With the development of synthetic aperture radar (SAR) technologies in recent years, the huge amount of remote sensing data brings challenges for real-time imaging processing. Therefore, high performance computing (HPC) methods have been presented to accelerate SAR imaging, especially the GPU based methods. In the classical GPU based imaging algorithm, GPU is employed to accelerate image processing by massive parallel computing, and CPU is only used to perform the auxiliary work such as data input/output (IO). However, the computing capability of CPU is ignored and underestimated. In this work, a new deep collaborative SAR imaging method based on multiple CPU/GPU is proposed to achieve real-time SAR imaging. Through the proposed tasks partitioning and scheduling strategy, the whole image can be generated with deep collaborative multiple CPU/GPU computing. In the part of CPU parallel imaging, the advanced vector extension (AVX) method is firstly introduced into the multi-core CPU parallel method for higher efficiency. As for the GPU parallel imaging, not only the bottlenecks of memory limitation and frequent data transferring are broken, but also kinds of optimized strategies are applied, such as streaming, parallel pipeline and so on. Experimental results demonstrate that the deep CPU/GPU collaborative imaging method enhances the efficiency of SAR imaging on single-core CPU by 270 times and realizes the real-time imaging in that the imaging rate outperforms the raw data generation rate. PMID:27070606

  20. A novel method to decrease electric field and SAR using an external high dielectric sleeve at 3 T head MRI: numerical and experimental results.

    PubMed

    Park, Bu S; Rajan, Sunder S; Guag, Joshua W; Angelone, Leonardo M

    2015-04-01

    Materials with high dielectric constant (HDC) have been used in high field MRI to decrease specific absorption rate (SAR), increase magnetic field intensity, and increase signal-to-noise ratio. In previous studies, the HDC materials were placed inside the RF coil decreasing the space available. This study describes an alternative approach that considers an HDC-based sleeve placed outside the RF coil. The effects of an HDC on the electromagnetic (EM) field were studied using numerical simulations with a coil unloaded and loaded with a human head model. In addition, experimental EM measurements at 128 MHz were performed inside a custom-made head coil, fitted with a distilled water sleeve. The numerical simulations showed up to 40% decrease in maximum 10 g-avg. SAR on the surface of the head model with an HDC material of barium titanate. Experimental measurements also showed up to 20% decrease of maximum electric field using an HDC material of distilled water. The proposed method can be incorporated in the design of high field transmit RF coils.

  1. Measurement of DNA damage in mammalian cells exposed in vitro to radiofrequency fields at SARs of 3-5 W/kg.

    PubMed

    Li, L; Bisht, K S; LaGroye, I; Zhang, P; Straube, W L; Moros, E G; Roti Roti, J L

    2001-09-01

    In the present study, we determined whether exposure of mammalian cells to 3.2-5.1 W/kg specific absorption rate (SAR) radiofrequency fields could induce DNA damage in murine C3H 10T(1/2) fibroblasts. Cell cultures were exposed to 847.74 MHz code-division multiple access (CDMA) and 835.62 frequency-division multiple access (FDMA) modulated radiations in radial transmission line (RTL) irradiators in which the temperature was regulated to 37.0 +/- 0.3 degrees C. Using the alkaline comet assay to measure DNA damage, we found no statistically significant differences in either comet moment or comet length between sham-exposed cells and those exposed for 2, 4 or 24 h to CDMA or FDMA radiations in either exponentially growing or plateau-phase cells. Further, a 4-h incubation after the 2-h exposure resulted in no significant changes in comet moment or comet length. Our results show that exposure of cultured C3H 10T(1/2) cells at 37 degrees C CDMA or FDMA at SAR values of up to 5.1 W/kg did not induce measurable DNA damage.

  2. On variant strategies to solve the magnitude least squares optimization problem in parallel transmission pulse design and under strict SAR and power constraints.

    PubMed

    Hoyos-Idrobo, A; Weiss, P; Massire, A; Amadon, A; Boulant, N

    2014-03-01

    Parallel transmission is a very promising candidate technology to mitigate the inevitable radio-frequency (RF) field inhomogeneity in magnetic resonance imaging at ultra-high field. For the first few years, pulse design utilizing this technique was expressed as a least squares problem with crude power regularizations aimed at controlling the specific absorption rate (SAR), hence the patient safety. This approach being suboptimal for many applications sensitive mostly to the magnitude of the spin excitation, and not its phase, the magnitude least squares (MLS) problem then was first formulated in 2007. Despite its importance and the availability of other powerful numerical optimization methods, the MLS problem yet has been faced almost exclusively by the pulse designer with the so-called variable exchange method. In this paper, we investigate various two-stage strategies consisting of different initializations and nonlinear programming approaches, and incorporate directly the strict SAR and hardware constraints. Several schemes such as sequential quadratic programming, interior point methods, semidefinite programming and magnitude squared least squares relaxations are studied both in the small and large tip angle regimes with RF and static field maps obtained in vivo on a human brain at 7T. Convergence and robustness of the different approaches are analyzed, and recommendations to tackle this specific problem are finally given. Small tip angle and inversion pulses are returned in a few seconds and in under a minute respectively while respecting the constraints, allowing the use of the proposed approach in routine.

  3. InSAR and GPS time series analysis: Crustal deformation in the Yucca Mountain, Nevada region

    NASA Astrophysics Data System (ADS)

    Li, Z.; Hammond, W. C.; Blewitt, G.; Kreemer, C. W.; Plag, H.

    2010-12-01

    Several previous studies have successfully demonstrated that long time series (e.g. >5 years) of GPS measurements can be employed to detect tectonic signals with a vertical rate greater than 0.3 mm/yr (e.g. Hill and Blewitt, 2006; Bennett et al. 2009). However, GPS stations are often sparse, with spacing from a few kilometres to a few hundred kilometres. Interferometric SAR (InSAR) can complement GPS by providing high horizontal spatial resolution (e.g. meters to tens-of metres) over large regions (e.g. 100 km × 100 km). A major source of error for repeat-pass InSAR is the phase delay in radio signal propagation through the atmosphere. The portion of this attributable to tropospheric water vapour causes errors as large as 10-20 cm in deformation retrievals. InSAR Time Series analysis with Atmospheric Estimation Models (InSAR TS + AEM), developed at the University of Glasgow, is a robust time series analysis approach, which mainly uses interferograms with small geometric baselines to minimise the effects of decorrelation and inaccuracies in topographic data. In addition, InSAR TS + AEM can be used to separate deformation signals from atmospheric water vapour effects in order to map surface deformation as it evolves in time. The principal purposes of this study are to assess: (1) how consistent InSAR-derived deformation time series are with GPS; and (2) how precise InSAR-derived atmospheric path delays can be. The Yucca Mountain, Nevada region is chosen as the study site because of its excellent GPS network and extensive radar archives (>10 years of dense and high-quality GPS stations, and >17 years of ERS and ENVISAT radar acquisitions), and because of its arid environment. The latter results in coherence that is generally high, even for long periods that span the existing C-band radar archives of ERS and ENVISAT. Preliminary results show that our InSAR LOS deformation map agrees with GPS measurements to within 0.35 mm/yr RMS misfit at the stations which is the

  4. Geolocation with error analysis using imagery from an experimental spotlight SAR

    NASA Astrophysics Data System (ADS)

    Wonnacott, William Mark

    This dissertation covers the development of a geometry-based sensor model for a specific monostatic spotlight synthetic aperture radar (SAR) system---referred to as the ExSAR (for experimental SAR). This sensor model facilitates single- and multiple-image geopositioning with error analysis. It allows for the use of known ground control points in refining the collection geometry parameters (a process called image resection) and for the subsequent geopositioning of other points using the resected image. Theoretically, the model also allows for the potential recovery of bias-like, persistent errors common across multiple images. The model also includes multi-image correspondence equations to aid in the cross-image identification of conjugate points. The sensor model development begins with a generic, theoretical approach to the modeling of spotlight SAR. A closed-form solution to the range and range-rate condition equations and the corresponding error propagation equation are presented. (The SAR condition equations have traditionally been solved iteratively.) The application of the closed-form solution in the image-to-ground and ground-to-image transformations is documented. The theoretical work also includes a preliminary error sensitivity analysis and a treatment of the spotlight SAR resection process. The ExSAR-specific model is established and assessed with an extensive set of images collected using the experimental radar over arrays of ground control points. Using this set, the imagery metadata elements are assessed, and the optimal element set for geopositioning is determined. The ExSAR imagery is shown to be transformed to the ground plane in only one dimension. The eventual ExSAR sensor model is used with known elevations and single-image geopositioning to show a horizontal accuracy of 8.23 m (rms). With resection using five ground-surveyed control points per image, the horizontal accuracy of reserved check points is 0.45 m (rms). Resections using the same

  5. Extraordinary GU-rich single-strand RNA identified from SARS coronavirus contributes an excessive innate immune response.

    PubMed

    Li, Yan; Chen, Ming; Cao, Hongwei; Zhu, Yuanfeng; Zheng, Jiang; Zhou, Hong

    2013-02-01

    A dangerous cytokine storm occurs in the SARS involving in immune disorder, but many aspects of the pathogenetic mechanism remain obscure since its outbreak. To deeply reveal the interaction of host and SARS-CoV, based on the basic structural feature of pathogen-associated molecular pattern, we created a new bioinformatics method for searching potential pathogenic molecules and identified a set of SARS-CoV specific GU-rich ssRNA fragments with a high-density distribution in the genome. In vitro experiments, the result showed the representative SARS-CoV ssRNAs had powerful immunostimulatory activities to induce considerable level of pro-inflammatory cytokine TNF-a, IL-6 and IL-12 release via the TLR7 and TLR8, almost 2-fold higher than the strong stimulatory ssRNA40 that was found previously from other virus. Moreover, SARS-CoV ssRNA was able to cause acute lung injury in mice with a high mortality rate in vivo experiment. It suggests that SARS-CoV specific GU-rich ssRNA plays a very important role in the cytokine storm associated with a dysregulation of the innate immunity. This study not only presents new evidence about the immunopathologic damage caused by overactive inflammation during the SARS-CoV infection, but also provides a useful clue for a new therapeutic strategy.

  6. UAVSAR: InSAR and PolSAR Test Bed for the Proposed NI-SAR Mission

    NASA Astrophysics Data System (ADS)

    Jones, C. E.; Hensley, S.; Lou, Y.

    2014-12-01

    UAVSAR, which first became operational in 2009, has served as an operational testbed for the NI-SAR L-band radar concept and a unique instrument in its own right. UAVSAR supports a broad array of basic and applied geoscience, covering on smaller scale all the disciplines NI-SAR would be able to address on a global scale. Although designed specifically to provide high accuracy repeated flight tracks and precise imaging geometry for InSAR-based solid earth studies, its fully polarimetric operation, low noise, and consistent calibration accuracy has made it a premier instrument for PolSAR-based studies also. Since 2009 it has successfully imaged more than 16 million km2 and >4300 quad-polarimetric data products are now publicly available online. Upgrades made in the last year to automate the repeat track processing serve as a model for generating large volumes of InSAR products: Since January 2014 more than 700 interferometric products have been released, exceeding the output of all previous years combined. Standardly available products now include browse images of all InSAR acquisitions and coregistered single-look complex image stacks suitable for standard time series analysis. Here we present an overview of the wide range of studies utilizing UAVSAR data including those based on polarimetry and pair-wise and times series interferometry, highlighting both the unique capabilities of UAVSAR and the ways in which NI-SAR would be able to dramatically extend the capabilities. This research was conducted at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration.

  7. Online Health Education on SARS to University Students during the SARS Outbreak

    ERIC Educational Resources Information Center

    Wong, Mee Lian; Koh, David; Iyer, Prasad; Seow, Adeline; Goh, Lee Gan; Chia, Sin Eng; Lim, Meng Kin; Ng, Daniel; Ong, Choon Nam; Phua, Kai Hong; Tambyah, Paul; Chow, Vincent T K; Chew, Suok Kai; Chandran, Ravi; Lee, Hin Peng

    2005-01-01

    Little is known about how online learning may be used to disseminate health information rapidly and widely to large university populations if there is an infectious disease outbreak. During the SARS outbreak in Singapore in 2003, a six-lesson elearning module on SARS was developed for a large university population of 32,000 students. The module…

  8. 20. OVERVIEW OF SAR3 COMPLEX, SHOWING FORMER RESIDENTIAL AREA, SAR3 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. OVERVIEW OF SAR-3 COMPLEX, SHOWING FORMER RESIDENTIAL AREA, SAR-3 SWITCH RACK, MAINTENANCE YARD, AND GREENSPOT BRIDGE. NOTE ALSO LARGE PIPE CONDUCTING TAILRACE WATER INTO IRRIGATION SYSTEM. VIEW TO SOUTHWEST. - Santa Ana River Hydroelectric System, Redlands, San Bernardino County, CA

  9. 23. OVERVIEW OF SAR3 AREA, SHOWING CORNER OF SAR3 WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. OVERVIEW OF SAR-3 AREA, SHOWING CORNER OF SAR-3 WITH TAILRACE, ADMINISTRATIVE OFFICE, TOILET SHED, AND RETAINING WALLS AT FORMER EMPLOYEE HOUSING SITE. VIEW TO SOUTHEAST. PANORAMA 1/2. - Santa Ana River Hydroelectric System, Redlands, San Bernardino County, CA

  10. The X-space formulation of the magnetic particle imaging process: 1-D signal, resolution, bandwidth, SNR, SAR, and magnetostimulation.

    PubMed

    Goodwill, Patrick W; Conolly, Steven M

    2010-11-01

    The magnetic particle imaging (MPI) imaging process is a new method of medical imaging with great promise. In this paper we derive the 1-D MPI signal, resolution, bandwidth requirements, signal-to-noise ratio (SNR), specific absorption rate, and slew rate limitations. We conclude with experimental data measuring the point spread function for commercially available SPIO nanoparticles and a demonstration of the principles behind 1-D imaging using a static offset field. Despite arising from the nonlinear temporal response of a magnetic nanoparticle to a changing magnetic field, the imaging process is linear in the magnetization distribution and can be described as a convolution. Reconstruction in one dimension is exact and has a well-behaved quasi-Lorentzian point spread function.The spatial resolution improves cubically with increasing diameter of the SPIO domain, inverse to absolute temperature, linearly with saturation magnetization, and inversely with gradient. The band width requirements approach a megahertz for reasonable imaging parameters and millimeter scale resolutions, and the SNR increases with the scanning rate. The limit to SNR as we scale MPI to human sizes will be patient heating. SAR and magnetostimulation limits give us surprising relations between optimal scanning speeds and scanning frequency for different types of scanners.

  11. Spaceborne SAR imaging by exact compensation of the attitude errors

    NASA Astrophysics Data System (ADS)

    Zhang, Zhiyong; Cao, Zhiguo; Zhang, Tianxu

    1999-08-01

    When the space-borne SAR works on the low-stability platform, the Doppler parameters (Doppler centroid and Doppler frequency rate) show variations during the azimuth illumination time, except that the variation of the Doppler parameters as a function of the range distance. That is to say, the azimuth reference function is two-dimensional variant (in range distance and azimuth), the conventional clutter lock and auto- focus for estimation of Doppler parameters are not sufficient for imaging. A model-based algorithm is proposed to exactly compensate the error introduced by the platform attitude instability, the efficiency of the algorithm is tested with computer simulation.

  12. On InSAR Ambiguity Resolution For Deformation Monitoring

    NASA Astrophysics Data System (ADS)

    Teunissen, P.

    2006-01-01

    Integer carrier phase ambiguity resolution is the key to fast and highprecision satellite positioning and navigation. It applies to a great variety of current and future models of GPS, modernized GPS and Galileo. It also applies to stacked radar interferometry for deformation monitoring, see e.g. [Hanssen, et al, 2001]. In this contribution we apply the integer least-squares' principle to the rank defect model of stacked InSAR carrier phase data. We discuss two ways of dealing with the rank defect for ambiguity resolution. One is based on the use of a priori data, the other is based on the use of an interval constraint on the deformation rate.

  13. Performance evaluation of SAR/GMTI algorithms

    NASA Astrophysics Data System (ADS)

    Garber, Wendy; Pierson, William; Mcginnis, Ryan; Majumder, Uttam; Minardi, Michael; Sobota, David

    2016-05-01

    There is a history and understanding of exploiting moving targets within ground moving target indicator (GMTI) data, including methods for modeling performance. However, many assumptions valid for GMTI processing are invalid for synthetic aperture radar (SAR) data. For example, traditional GMTI processing assumes targets are exo-clutter and a system that uses a GMTI waveform, i.e. low bandwidth (BW) and low pulse repetition frequency (PRF). Conversely, SAR imagery is typically formed to focus data at zero Doppler and requires high BW and high PRF. Therefore, many of the techniques used in performance estimation of GMTI systems are not valid for SAR data. However, as demonstrated by papers in the recent literature,1-11 there is interest in exploiting moving targets within SAR data. The techniques employed vary widely, including filter banks to form images at multiple Dopplers, performing smear detection, and attempting to address the issue through waveform design. The above work validates the need for moving target exploitation in SAR data, but it does not represent a theory allowing for the prediction or bounding of performance. This work develops an approach to estimate and/or bound performance for moving target exploitation specific to SAR data. Synthetic SAR data is generated across a range of sensor, environment, and target parameters to test the exploitation algorithms under specific conditions. This provides a design tool allowing radar systems to be tuned for specific moving target exploitation applications. In summary, we derive a set of rules that bound the performance of specific moving target exploitation algorithms under variable operating conditions.

  14. Monitoring delta subsidence with Interferometric Synthetic Aperture Radar (InSAR)

    NASA Astrophysics Data System (ADS)

    Higgins, S.; Overeem, I.; Syvitski, J. P.

    2014-12-01

    Can subsidence in river deltas be monitored in near real-time at the spatial and temporal resolution needed for informing critical management decisions? Interferometric Synthetic Radar Aperture (InSAR) is a satellite-based technique that can map ground deformation with millimeter-scale vertical resolution over thousands of square kilometers. InSAR has enormous potential to shed light on the dynamics of actively subsiding deltas, but the technique is not commonly applied outside of major cities due to the difficulty of performing InSAR in wet, vegetated settings. Given these limitations, how can InSAR best serve the global effort to monitor sinking deltas? Here, an overview of InSAR processing is provided that addresses delta-specific challenges, including frequent cloud-cover in tropical areas; noisy signals in wetlands and flooded fields; dense forests that interact unpredictably with different radar wavelengths; flat landscapes that hinder image stacking algorithms; rapid urban development that can render Digital Elevation Models (DEMs) inaccurate; and a lack of in situ GPS (Global Positioning System) receivers for InSAR calibration. InSAR has unique value for monitoring subsidence in deltas, and some natural and anthropogenic drivers of subsidence can be resolved by InSAR. High-resolution InSAR measurements from the Ganges-Brahmaputra Delta (GBD) are then presented and validated against GPS data. Surface motion is shown to reflect subsurface stratigraphy, and sediment compaction is shown to be the most important factor in this delta on short (non-tectonic) timescales. Average compaction rates throughout the eastern delta range from 0 to > 18 mm/y, varying by more than an order of magnitude depending on the ages and grain sizes of surface and subsurface sediment layers. Fastest subsidence is observed in Holocene organic-rich mud, and slowest subsidence is observed along the Meghna River and in areas with surface or subsurface sand deposits. Although groundwater

  15. Resilience of SAR11 bacteria to rapid acidification in the high-latitude open ocean.

    PubMed

    Hartmann, Manuela; Hill, Polly G; Tynan, Eithne; Achterberg, Eric P; Leakey, Raymond J G; Zubkov, Mikhail V

    2016-02-01

    Ubiquitous SAR11 Alphaproteobacteria numerically dominate marine planktonic communities. Because they are excruciatingly difficult to cultivate, there is comparatively little known about their physiology and metabolic responses to long- and short-term environmental changes. As surface oceans take up anthropogenic, atmospheric CO2, the consequential process of ocean acidification could affect the global biogeochemical significance of SAR11. Shipping accidents or inadvertent release of chemicals from industrial plants can have strong short-term local effects on oceanic SAR11. This study investigated the effect of 2.5-fold acidification of seawater on the metabolism of SAR11 and other heterotrophic bacterioplankton along a natural temperature gradient crossing the North Atlantic Ocean, Norwegian and Greenland Seas. Uptake rates of the amino acid leucine by SAR11 cells as well as other bacterioplankton remained similar to controls despite an instant ∼50% increase in leucine bioavailability upon acidification. This high physiological resilience to acidification even without acclimation, suggests that open ocean dominant bacterioplankton are able to cope even with sudden and therefore more likely with long-term acidification effects.

  16. Bridge Deformation Monitoring: Instight From InSAR Time-Series And Finite Element Modelling

    NASA Astrophysics Data System (ADS)

    Shamshiri, Roghayeh; Motagh, Mahdi; Baes, Marzieh; Sharifi, Mohammad-Ali

    2013-12-01

    This paper presents the capability of advanced InSAR time-series techniques such as Small BAseline Subset (SBAS) for monitoring of civil engineering structures like bridge. Deformation monitoring of bridges are essential to mitigate not only the financial and human losses, but also ecological and environmental-related problems. Assessment of deformation during bridge lifespan can provide invaluable insight for better planning and management. The study area, Lake Urmia Causeway (LUC) in northwest Iran, consists of one bridge and two embankments on both sides of it. The difference between the deformation rate of the embankments on both sides of the bridge may seriously damage the bridge itself, so it is very important to accurately monitor them in space and time in order to assess the state of the bridge concerning deformations. In this study we apply the InSAR time-series technique of SBAS for 58 SAR images including 10 ALOS, 30 Envisat and 18 TerraSAR-X (TSX) to assess deflation of embankments of Urmia bridge during 2003-2013. The InSAR results are used in a 2D Finite Element Model (FEM) to assess structural stability of the embankments.

  17. Quantifying sub-pixel urban impervious surface through fusion of optical and inSAR imagery

    USGS Publications Warehouse

    Yang, L.; Jiang, L.; Lin, H.; Liao, M.

    2009-01-01

    In this study, we explored the potential to improve urban impervious surface modeling and mapping with the synergistic use of optical and Interferometric Synthetic Aperture Radar (InSAR) imagery. We used a Classification and Regression Tree (CART)-based approach to test the feasibility and accuracy of quantifying Impervious Surface Percentage (ISP) using four spectral bands of SPOT 5 high-resolution geometric (HRG) imagery and three parameters derived from the European Remote Sensing (ERS)-2 Single Look Complex (SLC) SAR image pair. Validated by an independent ISP reference dataset derived from the 33 cm-resolution digital aerial photographs, results show that the addition of InSAR data reduced the ISP modeling error rate from 15.5% to 12.9% and increased the correlation coefficient from 0.71 to 0.77. Spatially, the improvement is especially noted in areas of vacant land and bare ground, which were incorrectly mapped as urban impervious surfaces when using the optical remote sensing data. In addition, the accuracy of ISP prediction using InSAR images alone is only marginally less than that obtained by using SPOT imagery. The finding indicates the potential of using InSAR data for frequent monitoring of urban settings located in cloud-prone areas.

  18. SAR Monitoring of Waves in Pancake Ice in the Marginal Ice Zone

    NASA Astrophysics Data System (ADS)

    De Carolis, Giacomo; Laurenza, Lucia Maria

    2016-08-01

    Frazil and pancake ice (FPI) is becoming an important component of the marginal ice zone (MIZ) owing to the dramatic changes occurring in the Arctic seas. This paper deals with the capability of synthetic aperture radars (SAR) to capture the changes suffered by ocean waves traveling in FPI fields, in order to relate them to the thickness of the ice layer crossed. We took advantage of the long-term ERS SAR acquisitions over polar oceans to carry out quantitative SAR spectral analysis for the Odden Ice Tongue (OIT), which developed in the Eastern Greenland Sea in the winter/spring 1997. A sea ice model, specifically developed to predict FPI distribution in the OIT, ran for that period to provide daily ice thicknesses and concentrations over 25 Km spatial scale. In situ samplings and wave ocean spectra collected within FPI fields during an oceanographic campaign for ice-ocean physics study carried on the R/V Jan Mayen were also available. To demonstrate the feasibility of the method, SAR inversion results were compared to the wave spectra collected by a directional wave buoy deployed on different FPI locations. Finally, wave attenuation rates computed over the ERS2 SAR image acquired on March 11, were compared with those collected in the Weddell Sea using an array of wave buoys.

  19. Permanent Scatterer InSAR Analysis and Validation in the Gulf of Corinth

    PubMed Central

    Elias, Panagiotis; Kontoes, Charalabos; Papoutsis, Ioannis; Kotsis, Ioannis; Marinou, Aggeliki; Paradissis, Dimitris; Sakellariou, Dimitris

    2009-01-01

    The Permanent Scatterers Interferometric SAR technique (PSInSAR) is a method that accurately estimates the near vertical terrain deformation rates, of the order of ∼1 mm year-1, overcoming the physical and technical restrictions of classic InSAR. In this paper the method is strengthened by creating a robust processing chain, incorporating PSInSAR analysis together with algorithmic adaptations for Permanent Scatterer Candidates (PSCs) and Permanent Scatterers (PSs) selection. The processing chain, called PerSePHONE, was applied and validated in the geophysically active area of the Gulf of Corinth. The analysis indicated a clear subsidence trend in the north-eastern part of the gulf, with the maximum deformation of ∼2.5 mm year-1 occurring in the region north of the Gulf of Alkyonides. The validity of the results was assessed against geophysical/geological and geodetic studies conducted in the area, which include continuous seismic profiling data and GPS height measurements. All these observations converge to the same deformation pattern as the one derived by the PSInSAR technique. PMID:22389587

  20. 14-bit pipeline-SAR ADC for image sensor readout circuits

    NASA Astrophysics Data System (ADS)

    Wang, Gengyun; Peng, Can; Liu, Tianzhao; Ma, Cheng; Ding, Ning; Chang, Yuchun

    2015-03-01

    A two stage 14bit pipeline-SAR analog-to-digital converter includes a 5.5bit zero-crossing MDAC and a 9bit asynchronous SAR ADC for image sensor readout circuits built in 0.18um CMOS process is described with low power dissipation as well as small chip area. In this design, we employ comparators instead of high gain and high bandwidth amplifier, which consumes as low as 20mW of power to achieve the sampling rate of 40MSps and 14bit resolution.

  1. Electron thermalization and trapping rates in pure and doped alkali and alkaline-earth iodide crystals studied by picosecond optical absorption

    NASA Astrophysics Data System (ADS)

    Ucer, K. B.; Bizarri, G.; Burger, A.; Gektin, A.; Trefilova, L.; Williams, R. T.

    2014-04-01

    Although light continues to be emitted from insulating crystals used as scintillators over a period of nanoseconds to microseconds after stopping of an energetic particle, much of what determines the nonlinearity of response goes on in the first picoseconds. On this time scale, free carriers and excitons are at high density near the track core and thus are subject to nonlinear quenching. The hot (free) electrons eventually cool to low enough energy that trapping on holes, dopants, or defects can commence. In the track environment, spatial distributions of trapped carriers determined on the picosecond time scale can influence the proportionality between light yield and the initial particle energy throughout the whole light pulse. Picosecond spectroscopy of optical absorption induced by a short pulse of above-gap excitation provides a useful window on what occurs during the crucial early evolution of excited populations. The laser excitation can be tuned to excite carriers that are initially very hot (˜3 eV) relative to the band edges, or that are almost thermalized (˜0.1 eV excess energy) at the outset. Undoped and doped samples of NaI:Tl(0%, 0.1%), CsI:Tl(0%, 0.01%, 0.04%, 0.3%), and SrI2:Eu(0%, 0.2%, 0.5%, 3%) are studied in this work.

  2. A simple and fast method for assessment of the nitrogen-phosphorus-potassium rating of fertilizers using high-resolution continuum source atomic and molecular absorption spectrometry

    NASA Astrophysics Data System (ADS)

    Bechlin, Marcos André; Fortunato, Felipe Manfroi; da Silva, Ricardo Moutinho; Ferreira, Edilene Cristina; Gomes Neto, José Anchieta

    2014-11-01

    The determination of N, P, and K in fertilizers by high-resolution continuum source flame atomic and molecular absorption spectrometry is proposed. Under optimized conditions, measurements of the diatomic molecules NO and PO at 215.360 and 247.620 nm, respectively, and K using the wing of the alternative line at 404.722 nm allowed calibration curves to be constructed in the ranges 500-5000 mg L- 1 N (r = 0.9994), 100-2000 mg L- 1 P (r = 0.9946), and 100-2500 mg L- 1 K (r = 0.9995). Commercial fertilizers were analyzed by the proposed method and the concentrations of N, P, and K were found to be in agreement with those obtained by Kjeldahl, spectrophotometric, and flame atomic emission spectrometry methods, respectively, at a 95% confidence level (paired t-test). A phosphate rock certified reference material (CRM) was analyzed and the results for P and K were in agreement with the reference values. Recoveries from spiked CRM were in the ranges 97-105% (NO3--N), 95-103% (NH4+-N), 93-103% (urea-N), 99-108% (P), and 99-102% (K). The relative standard deviations (n = 12) for N, P, and K were 6, 4, and 2%, respectively.

  3. Motion compensation for aircraft-borne interferometric SAR

    NASA Astrophysics Data System (ADS)

    Bullock, Richard John

    This research has studied data driven techniques for roll compensation for aircraft-borne InSAR, for platforms where an accurate Inertial Navigation Unit (INU) is inappropriate due to limitations on weight or cost, such as a low-cost civilian mapping system or a miniature UAV. It is shown that for unknown topography, roll errors cannot simply be filtered from the interferogram due to a fundamental ambiguity between aircraft roll effects and certain types of undulating terrain. The solution to this problem lies in the differential Doppler shifts of the signals received at the two antennas. These are proportional to the aircraft roll rate and can be extracted by incoherent or coherent means and utilised to reconstruct the aircraft roll history. This research analyses, experimentally evaluates and further develops the incoherent Differential Doppler (DD) method for roll compensation, developed to the proof-of-concept stage by A. Currie at QinetiQ (Malvern) and compares this with the two-look method, which is a novel coherent technique developed, analysed and experimentally evaluated as part of this PhD from an original idea proposed by Prof. R. Voles of UCL. By means of empirical analysis, numerical simulation and real test data from the QinetiQ C-Band InSAR, it is shown that the two-look method offers significant advantages in sensitivity, frequency performance, robustness and efficiency of implementation over the DD method, particularly at long range. The experimental results also show that for the QinetiQ C-Band InSAR, the two-look method provides roll compensation to a similar quality or better than provided by the on-board Litton-93 INU, which has a specified accuracy of +/-0.05°. Ambiguities in the roll rate estimates from other motions are also shown to be small for this platform, and could be reduced further by employing differential GPS track compensation.

  4. Representations of SARS in the British newspapers.

    PubMed

    Washer, Peter

    2004-12-01

    In the Spring of 2003, there was a huge interest in the global news media following the emergence of a new infectious disease: severe acute respiratory syndrome (SARS). This study examines how this novel disease threat was depicted in the UK newspapers, using social representations theory and in particular existing work on social representations of HIV/AIDS and Ebola to analyse the meanings of the epidemic. It investigates the way that SARS was presented as a dangerous threat to the UK public, whilst almost immediately the threat was said to be 'contained' using the mechanism of 'othering': SARS was said to be unlikely to personally affect the UK reader because the Chinese were so different to 'us'; so 'other'. In this sense, the SARS scare, despite the remarkable speed with which it was played out in the modern global news media, resonates with the meanings attributed to other epidemics of infectious diseases throughout history. Yet this study also highlights a number of differences in the social representations of SARS compared with earlier epidemics. In particular, this study examines the phenomena of 'emerging and re-emerging infectious diseases' over the past 30 or so years and suggests that these have impacted on the faith once widely held that Western biomedicine could 'conquer' infectious disease.

  5. Automated rectification and geocoding of SAR imagery

    NASA Technical Reports Server (NTRS)

    Kwok, R.; Curlander, J. C.

    1987-01-01

    An automated post-processing system has been developed for rectification and geocoding of SAR (Synthetic Aperture Radar) imagery. The system uses as input a raw uncorrected image from the operational SAR correlator, and produces as a standard output a rectified and geocoded product. The accurate geolocation of SAR image pixels is provided by a spatial transformation model which maps the slant range-azimuth SAR image pixels into their location on a prespecified map grid. This model predicts the geodetic location of each pixel by utilizing: the sensor platform position; a geoid model; the parameters of the data collection system and the processing parameters used in the SAR correlator. Based on their geodetic locations, the pixels are mapped by using the desired cartographic projection equations. This rectification and geocoding technique has been tested with Seasat and SIR-B images. The test results demonstrate absolute location uncertainty of less than 50 m and relative distortion (scale factor and skew) of less than 0.1 percent relative to local variations from the assumed geoid.

  6. ICAO's anti-SARS airport activities.

    PubMed

    Finkelstein, Silvio; Curdt-Christiansen, Claus M

    2003-11-01

    To prevent SARS from spreading through air travel and in order to rebuild the confidence of the traveling public in the safety of air travel, ICAO has set up an "Anti-SARS Airport Evaluation Project." The first phase of this project was to develop a set of protective measures for international airports in affected areas to adopt and implement and then to send out, on the request of Contracting States, a team of inspectors to evaluate and assess airports and issue a "statement of evaluation" that the airport inspected complies with the ICAO anti-SARS protective measures. In cooperation with the World Health Organization (WHO), the first part of phase 1 was completed in early June this year, and the second part of phase 1 followed soon after. By mid-July, five international airports in Southeast Asia had been inspected and found to be in full compliance with the ICAO anti-SARS protective measures. The success of this ICAO project is believed to have contributed significantly to the recovery of international air travel and related industries now taking place. Phase 2 of the project is now being developed. It is aimed at preventing a resurgence of SARS, but it also contains elements to make the methodology developed applicable to future outbreaks of any other communicable disease in which the mode of transmission could involve aviation and/or the need to prevent the spread of the disease by air travel.

  7. A comparative evaluation of SAR and SLAR

    SciTech Connect

    Mastin, G.A.; Manson, J.J.; Bradley, J.D.; Axline, R.M.; Hover, G.L.

    1993-11-01

    Synthetic aperture radar (SAR) was evaluated as a potential technological improvement over the Coast Guard`s existing side-looking airborne radar (SLAR) for oil-spill surveillance applications. The US Coast Guard Research and Development Center (R&D Center), Environmental Branch, sponsored a joint experiment including the US Coast Guard, Sandia National Laboratories, and the Naval Oceanographic and Atmospheric Administration (NOAA), Hazardous Materials Division. Radar imaging missions were flown on six days over the coastal waters off Santa Barbara, CA, where there are constant natural seeps of oil. Both the Coast Guard SLAR and the Sandia National Laboratories SAR were employed to acquire simultaneous images of oil slicks and other natural sea surface features that impact oil-spill interpretation. Surface truth and other environmental data were also recorded during the experiment. The experiment data were processed at Sandia National Laboratories and delivered to the R&D Center on a computer workstation for analysis by experiment participants. Issues such as optimal spatial resolution, single-look vs. multi-look SAR imaging, and the utility of SAR for oil-spill analysis were addressed. Finally, conceptual design requirements for a possible future Coast Guard SAR were outlined and evaluated.

  8. Sparse and accurate high resolution SAR imaging

    NASA Astrophysics Data System (ADS)

    Vu, Duc; Zhao, Kexin; Rowe, William; Li, Jian

    2012-05-01

    We investigate the usage of an adaptive method, the Iterative Adaptive Approach (IAA), in combination with a maximum a posteriori (MAP) estimate to reconstruct high resolution SAR images that are both sparse and accurate. IAA is a nonparametric weighted least squares algorithm that is robust and user parameter-free. IAA has been shown to reconstruct SAR images with excellent side lobes suppression and high resolution enhancement. We first reconstruct the SAR images using IAA, and then we enforce sparsity by using MAP with a sparsity inducing prior. By coupling these two methods, we can produce a sparse and accurate high resolution image that are conducive for feature extractions and target classification applications. In addition, we show how IAA can be made computationally efficient without sacrificing accuracies, a desirable property for SAR applications where the size of the problems is quite large. We demonstrate the success of our approach using the Air Force Research Lab's "Gotcha Volumetric SAR Data Set Version 1.0" challenge dataset. Via the widely used FFT, individual vehicles contained in the scene are barely recognizable due to the poor resolution and high side lobe nature of FFT. However with our approach clear edges, boundaries, and textures of the vehicles are obtained.

  9. Millimeter waves thermally alter the firing rate of the Lymnaea pacemaker neuron

    SciTech Connect

    Alekseev, S.I.; Kochetkova, N.V.; Ziskin, M.C.; Bolshakov, M.A.

    1997-05-01

    The effects of millimeter waves (mm-waves, 75 GHz) and temperature elevation on the firing rate of the BP-4 pacemaker neuron of the pond snail Lymnaea stagnalis were studied by using microelectrode techniques. The open end of a rectangular waveguide covered with a thin Teflon film served as a radiator. Specific absorption rates (SARs), measured in physiological solution at the radiator outlet, ranged from 600 to 4,200 W/kg, causing temperature rises from 0.3 to 2.2 C, respectively. Irradiation at an SAR of 4,200 W/kg caused a biphasic change in the firing rate, i.e., a transient decrease in the firing rate followed by a gradual increase to a new level that was 68 {+-} 21% above control. The biphasic changes in the firing rate were reproduced by heating under the condition that the magnitude (2 C) and the rate of temperature rise were equal to those produced by the irradiation. The addition of 0.05 mM of ouabain caused the disappearance of transient responses of the neuron to the irradiation. It was shown that the rate of temperature rise played an important role in the development of a transient neuronal response. The threshold stimulus for a transient response of the BP-4 neutron found in warming experiments was a temperature rise of 0.0025 C/s.

  10. Does absorption of ultraviolet B by stratospheric ozone and urban aerosols influence colon and breast cancer mortality rates? Contributions from NASA and NOAA data

    NASA Astrophysics Data System (ADS)

    Gorham, Edward D.; Garland, Frank C.; Mohr, Sharif B.; Grant, William B.; Garland, Cedric F.

    2005-08-01

    Although most ultraviolet B (UVB) radiation is absorbed by stratospheric ozone, dense anthropogenic sulfate aerosols in the troposphere may further attenuate UVB in some regions. Mortality rates from colon and breast cancer tend to be much higher in areas with low levels of UVB radiation. These high rates may be due in part to inadequate cutaneous photosynthesis of vitamin D. Satellite data on atmospheric aerosols, stratospheric ozone, and cloud cover were obtained from the National Aeronautics and Space Administration (NASA) and the National Oceanic and Atmospheric Administration (NOAA). These data were combined with age-adjusted mortality rates from 175 countries reporting to the World Health Organization. Regression was used to assess the relationship of stratospheric ozone thickness, aerosol optical depth, cloud cover, solar UVB irradiance at the top of the atmosphere, average skin exposure, and a dietary factor with colon and breast cancer mortality rates. Solar UVB irradiance at the top of the atmosphere, total cloud cover, and atmospheric aerosols had the strongest associations with mortality rates, apart from a strong influence of diet. Since 95% of circulating vitamin D is derived from current or stored products of photosynthesis, which may be nonexistent or minimal much of the year above 37°N or below 37°S, attenuation of UVB by atmospheric aerosols and clouds may have a greater than expected adverse effect on human health.

  11. Mapping Glacier Surface Elevation and its Changes of Puruogangri Ice Field with SAR Interferometry

    NASA Astrophysics Data System (ADS)

    Liu, Lin; Jiang, Liming; Sun, Yafei; Wang, Hansheng; Sun, Yongling

    2014-11-01

    Accurate DEMs are required for measuring glacier volume and mass change. The recently launched TanDEM-X (TDX) and TerraSAR-X (TSX) satellite system, which is the first bistatic spaceborne SAR mission, has the potential to acquire the accurate DEMs of most glaciers and ice caps. Here, we report on the application of TSX/TDX data sets for the measurement of mountain glacier DEMs over Tibetan Plateau. A DEM is generated with two pairs of TSX/TDX SAR images obtained in January 2012 over Puruogangri ice field (PIF). Moreover, we also estimate the elevation changes of the PIF by subtracting the SRTM-X DEM from the TSX/TDX DEM. Mean annual thinning rate of -0.0225±0.015 m yr-1 is observed between 2000 and 2012.

  12. APES-based procedure for super-resolution SAR imagery with GPU parallel computing

    NASA Astrophysics Data System (ADS)

    Jia, Weiwei; Xu, Xiaojian; Xu, Guangyao

    2015-10-01

    The amplitude and phase estimation (APES) algorithm is widely used in modern spectral analysis. Compared with conventional Fourier transform (FFT), APES results in lower sidelobes and narrower spectral peaks. However, in synthetic aperture radar (SAR) imaging with large scene, without parallel computation, it is difficult to apply APES directly to super-resolution radar image processing due to its great amount of calculation. In this paper, a procedure is proposed to achieve target extraction and parallel computing of APES for super-resolution SAR imaging. Numerical experimental are carried out on Tesla K40C with 745 MHz GPU clock rate and 2880 CUDA cores. Results of SAR image with GPU parallel computing show that the parallel APES is remarkably more efficient than that of CPU-based with the same super-resolution.

  13. Pre-processing SAR image stream to facilitate compression for transport on bandwidth-limited-link

    DOEpatents

    Rush, Bobby G.; Riley, Robert

    2015-09-29

    Pre-processing is applied to a raw VideoSAR (or similar near-video rate) product to transform the image frame sequence into a product that resembles more closely the type of product for which conventional video codecs are designed, while sufficiently maintaining utility and visual quality of the product delivered by the codec.

  14. An improved MIMO-SAR simulator strategy with ray tracing

    NASA Astrophysics Data System (ADS)

    Xiang, Xingyu; Mo, Zijian; Wang, Zhonghai; Chen, Genshe; Pham, Khanh; Blasch, Erik

    2016-05-01

    High resolution and wide-swath imaging can be obtained by Multiple-Input Multiple-Output (MIMO) synthetic aperture radar (SAR) with the state of the art technologies. The time division multiple access (TDMA) MIMO SAR mimics the motion of the antenna of SAR systems by switching the array channels to transmit the radar signals at different time slots. In this paper, we develop a simulation tool with ray tracing techniques to retrieve high resolution and accurate SAR images for development of MIMO SAR imaging methods. Without loss of generality, in the proposed simulator, we apply a TDMA MIMO SAR system with 13 transmitting antennas and 8 receiving antennas, where all transmitting antennas share a single transmitter and the receiving antennas share a single receiver. By comparing with the normal simulation MIMO SAR strategies, the simulation image using ray tracing results validate that the proposed method provides more accurate and higher resolution SAR images.

  15. Orchitis: a complication of severe acute respiratory syndrome (SARS).

    PubMed

    Xu, Jian; Qi, Lihua; Chi, Xiaochun; Yang, Jingjing; Wei, Xiaohong; Gong, Encong; Peh, Suatcheng; Gu, Jiang

    2006-02-01

    Severe acute respiratory syndrome (SARS) coronavirus has been known to damage multiple organs; however, little is known about its impact on the reproductive system. In the present study, we analyzed the pathological changes of testes from six patients who died of SARS. Results suggested that SARS caused orchitis. All SARS testes displayed widespread germ cell destruction, few or no spermatozoon in the seminiferous tubule, thickened basement membrane, and leukocyte infiltration. The numbers of CD3+ T lymphocytes and CD68+ macrophages increased significantly in the interstitial tissue compared with the control group (P < 0.05). SARS viral genomic sequences were not detected in the testes by in situ hybridization. Immunohistochemistry demonstrated abundant IgG precipitation in the seminiferous epithelium of SARS testes, indicating possible immune response as the cause for the damage. Our findings indicated that orchitis is a complication of SARS. It further suggests that the reproductive functions should be followed and evaluated in recovered male SARS patients.

  16. Processing pharus data with the generic SAR processor

    SciTech Connect

    Otten, M.P.G.

    1996-11-01

    The Generic SAR Processor (GSP) is a SAR processing environment created to process airborne and spaceborne SAR data with a maximum amount of flexibility, while at the same time providing a user friendly and powerful environment for handling and analyzing SAR, including polarimetric calibration. PHARUS is an airborne polarimetric C-band SAR, utilizing an active (solid state) phased array. The absence of mechanical antenna stabilization, the use of electronic beam steering, in combination with high PRF, polarimetric operation, under motion condition which can be severe, requires a very large flexibility of the SAR processor. The GSP is designed to handle this type of SAR data with a very flexible motion compensation-, azimuth compression-, and radiometric correction approach. First experiences with the processing of PHARUS data show that this is a valid approach to obtain high quality polarimetric imagery with a phased array SAR. 4 refs., 5 figs.

  17. A new rapidly absorbed paediatric paracetamol suspension. A six-way crossover pharmacokinetic study comparingthe rate and extent of paracetamol absorption from a new paracetamol suspension with two marketed paediatric formulations.

    PubMed

    Smith, Stephen; Collaku, Agron; Heaslip, Louise; Yue, Yong; Starkey, Yan-Yan; Clarke, Geoffrey; Kronfeld, Nick

    2012-03-01

    The objective of this study was to compare the rate and extent of paracetamol absorption from the new Paracetamol pediatric suspension (PPS) with two marketed paracetamol suspensions: Children's panadol (CP) and Panodil baby & infant (PBI). The study also assessed the effect on paracetamol absorption of light-calorie, low-fat food consumed 2 h before dosing. Twenty eight male adult volunteers received a single oral dose of 1000 mg of paracetamol from each of three treatments, in both fasted and fed states according to a randomized, single-center, open-label, six-way crossover study design. PPS was bioequivalent to both CP and PBI for AUC(0-10 h), AUC(0-inf) and C(max) in both fasted and fed state. However, PPS had greater rate of paracetamol absorption and a faster speed of onset. T(max) for PPS was significantly shorter than for PBI in both fasted (p = 0.0005) and fed state (p = 0.0001). Median T(max) for PPS was also 10 min shorter than CP in fasted state. Time to reach minimum effective concentration (MEC) for PPS was significantly shorter than CP and PBI. Early paracetamol exposure of PPS was significantly higher than that of the two existing paracetamol products. Food had a significant effect in the early exposure and onset of therapeutic level of paracetamol from PPS. AUC(0-30 min) was significantly higher and time to reach plasma paracetamol at MEC level was significantly shorter than in the fasted state.

  18. Characterizing hydrologic changes of Great Dismal Swamp using SAR/InSAR technology

    NASA Astrophysics Data System (ADS)

    Kim, J. W.; Lu, Z.; Zhu, Z.

    2015-12-01

    Great Dismal Swamp is one of the largest, northernmost peatlands on the Atlantic Coastal Plain, and the swamp is underlain by a thick water-logged organic soil layer (peat) made up of dead and decaying plant material. The peatlands play a role as the sink of large amount of soil organic carbon and methane. However, the disturbance of the peatland negatively impacted the ecosystem and contributed to the climate change caused by the released greenhouse gas. Our SAR/InSAR methods observed the hydrologic changes in the peatlands, which is a key factor to conserve the wetland, through several methods. First, we compared averaged SAR intensity from C- and L-band SAR sensors with groundwater level changes, and deduced a linear relationship between the SAR backscattering intensity and the groundwater level change. Second, we extracted the inundated area during wet season from InSAR coherence. Third, we measured the relative water level changes in the inundated area using the interferometric phases. Finally, we estimated the groundwater level changes corresponding to the soil moisture changes from time-series InSAR method. Our results can provide the unique opportunity to understand the occurring hydrologic and vegetation changes in the Great Dismal Swamp.

  19. Justification of Drug Product Dissolution Rate and Drug Substance Particle Size Specifications Based on Absorption PBPK Modeling for Lesinurad Immediate Release Tablets.

    PubMed

    Pepin, Xavier J H; Flanagan, Talia R; Holt, David J; Eidelman, Anna; Treacy, Don; Rowlings, Colin E

    2016-09-06

    In silico absorption modeling has been performed, to assess the impact of in vitro dissolution on in vivo performance for ZURAMPIC (lesinurad) tablets. The dissolution profiles of lesinurad tablets generated using the quality control method were used as an input to a GastroPlus model to estimate in vivo dissolution in the various parts of the GI tract and predict human exposure. A model was set up, which accounts for differences of dosage form transit, dissolution, local pH in the GI tract, and fluid volumes available for dissolution. The predictive ability of the model was demonstrated by confirming that it can reproduce the Cmax observed for independent clinical trial. The model also indicated that drug product batches that pass the proposed dissolution specification of Q = 80% in 30 min are anticipated to be bioequivalent to the clinical reference batch. To further explore the dissolution space, additional simulations were performed using a theoretical dissolution profile below the proposed specification. The GastroPlus modeling indicates that such a batch will also be bioequivalent to standard clinical batches despite having a dissolution profile, which would fail the proposed dissolution specification of Q = 80% in 30 min. This demonstrates that the proposed dissolution specification sits comfortably within a region of dissolution performance where bioequivalence is anticipated and is not near an edge of failure for dissolution, providing additional confidence to the proposed specifications. Finally, simulations were performed using a virtual drug substance batch with a particle size distribution at the limit of the proposed specification for particle size. Based on these simulations, such a batch is also anticipated to be bioequivalent to clinical reference, demonstrating that the proposed specification limits for particle size distribution would give products bioequivalent to the pivotal clinical batches.

  20. Estimating subtle long-wavelength deformation with InSAR: Application to the Chaman Fault

    NASA Astrophysics Data System (ADS)

    Fattahi, H.; Amelung, F.

    2012-12-01

    error. Results from this study are very promising for InSAR community to explore the Envisat archive to measure long-wavelength deformation using the proposed strategy. We have applied the proposed processing strategy on the Envisat ASAR time-series data to measure the geodetic slip rate along the northern Chaman Fault. The preliminary results show the shallow fault creep along some segments of the fault, north of Chaman city. Velocity map from InSAR combined with seismic information in this area suggests strain partitioning between various known and unknown faults at the western Indian boundary.

  1. PRF Ambiguity Detrmination for Radarsat ScanSAR System

    NASA Technical Reports Server (NTRS)

    Jin, Michael Y.

    1998-01-01

    PRF ambiguity is a potential problem for a spaceborne SAR operated at high frequencies. For a strip mode SAR, there were several approaches to solve this problem. This paper, however, addresses PRF ambiguity determination algorithms suitable for a burst mode SAR system such as the Radarsat ScanSAR. The candidate algorithms include the wavelength diversity algorithm, range look cross correlation algorithm, and multi-PRF algorithm.

  2. Development of InSAR technology on deformation monitoring

    NASA Astrophysics Data System (ADS)

    Jiao, Ming-lian; Jiang, Ting-chen; Zong, Yu-yu

    2008-10-01

    In recent years, application of InSAR (Interferometric Synthetic Aperture, Radar) to deformation monitoring has become a hotspot in research of geological hazards. This paper introduces the basic principles and data processing procedures of InSAR and summarizes main progresses made in InSAR technology and its application to deformation monitoring. Through actual examples of application and research at home and abroad, the article figures out existing problems and the future of application of InSAR.

  3. Segmentation of Multilook, Multifrequency, and Multipolarimetric SAR Data.

    DTIC Science & Technology

    1995-11-20

    1995 Final Technical 02/01/92-07/31/95 4. TITLE AND SUBTITLE S. FUNDING NUMBERS Segmentation of Multilook , Multifrequency, and Multipolarimetric SAR Data...Maximum 200 worth) This final report summarizes the findings of the research, "Segmentation of Multi-look, Multi-frequency and Multi- polarimetric SAR ...segmentation of high resolution SAR images, b) detection of man-made features in SAR images and c) labeling, as well as, grouping algorithms. These

  4. Classification of Targets in SAR Images Using ISAR Data

    DTIC Science & Technology

    2005-05-01

    Classification of Targets in SAR Images Using ISAR Data J. J. M. de Wit, R. J. Dekker, and A. C. van den Broek TNO Defence, Security, and Safety...classification of targets in SAR images by using ISAR measurements was studied, based on polarimetric SAR and ISAR data acquired with the MEMPHIS...interest in synthetic aperture radar ( SAR ) systems is increasing as well, mainly due to their all-weather capability. A study for the Dutch Ministry of

  5. Coastal Sea Level From CRYOSAT-2 SAR and SAR-In Altimetry

    NASA Astrophysics Data System (ADS)

    Andersen, O. B.; Abulaitijiang, A.; Knudsen, P.; Stenseng, L.

    2014-12-01

    Cryosat-2 offers the first ever possibility to perform coastal altimetric studies using bor SAR-altimetry and SAR-In altimetry. With this technological leap forward Cryosat-2 is now able to observe sea level in very small water bodies and also to provide coastal sea level very close to the shore. We perform an investigation into the retrieval of sea surface height around Denmark and Greenland. These regions have been chosen as the coastal regions around Denmark falls within the SAR mask and the coastal regions of Greenland falls in under the SAR-in mask employed on Cryosat-2. SAR-in was mainly used in coastal regions of Greenland because of its huge topographic changes as Cryosat-2 is designed to map the margins of the ice-sheet. The coastal region around Denmark is a test region of the EU FP7 sponsored project LOTUS esablishing SAR altimetry product in preparation for Sentinel-3. With the increased spatial resolution of Cryosat-2 SAR we provide valuable sea level observations within the Straits around Denmark which are crucial to constrain the waterflow in and out of the Baltic Sea. The investigation of SAR-in data in Greenland adds an entire new dimension to coastal altimetry. An amazing result of the investigation is the ability of Cryosat-2 to detect and recover sea level even though the coast (sealevel) is up to 15 km away from the nadir location of the satellite. This ability of capture and use returns from outside the main (-3Db) loop in theory enables Cryosat-2 SAR-in to map sea level height of fjords more frequently than the 369 days repeat.

  6. A P-band SAR interference filter

    NASA Technical Reports Server (NTRS)

    Taylor, Victor B.

    1992-01-01

    The synthetic aperture radar (SAR) interference filter is an adaptive filter designed to reduce the effects of interference while minimizing the introduction of undesirable side effects. The author examines the adaptive spectral filter and the improvement in processed SAR imagery using this filter for Jet Propulsion Laboratory Airborne SAR (JPL AIRSAR) data. The quality of these improvements is determined through several data fidelity criteria, such as point-target impulse response, equivalent number of looks, SNR, and polarization signatures. These parameters are used to characterize two data sets, both before and after filtering. The first data set consists of data with the interference present in the original signal, and the second set consists of clean data which has been coherently injected with interference acquired from another scene.

  7. Verification of L-band SAR calibration

    NASA Technical Reports Server (NTRS)

    Larson, R. W.; Jackson, P. L.; Kasischke, E.

    1985-01-01

    Absolute calibration of a digital L-band SAR system to an accuracy of better than 3 dB has been verified. This was accomplished with a calibration signal generator that produces the phase history of a point target. This signal relates calibration values to various SAR data sets. Values of radar cross-section (RCS) of reference reflectors were obtained using a derived calibration relationship for the L-band channel on the ERIM/CCRS X-C-L SAR system. Calibrated RCS values were compared to known RCS values of each reference reflector for verification and to obtain an error estimate. The calibration was based on the radar response to 21 calibrated reference reflectors.

  8. Stop outbreak of SARS with infrared cameras

    NASA Astrophysics Data System (ADS)

    Wu, Yigang M.

    2004-04-01

    SARS (Severe Acute Respiratory Syndrome, commonly known as Atypical Pneumonia in mainland China) caused 8422 people affected and resulting in 918 deaths worldwide in half year. This disease can be transmitted by respiratory droplets or by contact with a patient's respiratory secretions. This means it can be spread out very rapidly through the public transportations by the travelers with the syndrome. The challenge was to stop the SARS carriers traveling around by trains, airplanes, coaches and etc. It is impractical with traditional oral thermometers or spot infrared thermometers to screen the tens of travelers with elevated body temperature from thousands of normal travelers in hours. The thermal imager with temperature measurement function is a logical choice for this special application although there are some limitations and drawbacks. This paper discusses the real SARS applications of industrial infrared cameras in China from April to July 2003.

  9. Viral load distribution in SARS outbreak.

    PubMed

    Chu, Chung-Ming; Cheng, Vincent C C; Hung, Ivan F N; Chan, Kin-Sang; Tang, Bone S F; Tsang, Thomas H F; Chan, Kwok-Hung; Yuen, Kwok-Yung

    2005-12-01

    An unprecedented community outbreak of severe acute respiratory syndrome (SARS) occurred in the Amoy Gardens, a high-rise residential complex in Hong Kong. Droplet, air, contaminated fomites, and rodent pests have been proposed to be mechanisms for transmitting SARS in a short period. We studied nasopharyngeal viral load of SARS patients on admission and their geographic distribution. Higher nasopharyngeal viral load was found in patients living in adjacent units of the same block inhabited by the index patient, while a lower but detectable nasopharyngeal viral load was found in patients living further away from the index patient. This pattern of nasopharyngeal viral load suggested that airborne transmission played an important part in this outbreak in Hong Kong. Contaminated fomites and rodent pests may have also played a role.

  10. First Results from an Airborne Ka-Band SAR Using SweepSAR and Digital Beamforming

    NASA Technical Reports Server (NTRS)

    Sadowy, Gregory A.; Ghaemi, Hirad; Hensley, Scott C.

    2012-01-01

    SweepSAR is a wide-swath synthetic aperture radar technique that is being studied for application on the future Earth science radar missions. This paper describes the design of an airborne radar demonstration that simulates an 11-m L-band (1.2-1.3 GHz) reflector geometry at Ka-band (35.6 GHz) using a 40-cm reflector. The Ka-band SweepSAR Demonstration system was flown on the NASA DC-8 airborne laboratory and used to study engineering performance trades and array calibration for SweepSAR configurations. We present an instrument and experiment overview, instrument calibration and first results.

  11. Efficacy of various disinfectants against SARS coronavirus.

    PubMed

    Rabenau, H F; Kampf, G; Cinatl, J; Doerr, H W

    2005-10-01

    The recent severe acute respiratory syndrome (SARS) epidemic in Asia and Northern America led to broad use of various types of disinfectant in order to control the public spread of the highly contagious virus. However, only limited data were available to demonstrate their efficacy against SARS coronavirus (SARS-CoV). We therefore investigated eight disinfectants for their activity against SARS-CoV according to prEN 14476. Four hand rubs were tested at 30s (Sterillium, based on 45% iso-propanol, 30% n-propanol and 0.2% mecetronium etilsulphate; Sterillium Rub, based on 80% ethanol; Sterillium Gel, based on 85% ethanol; Sterillium Virugard, based on 95% ethanol). Three surface disinfectants were investigated at 0.5% for 30 min and 60 min (Mikrobac forte, based on benzalkonium chloride and laurylamine; Kohrsolin FF, based on benzalkonium chloride, glutaraldehyde and didecyldimonium chloride; Dismozon pur, based on magnesium monoperphthalate), and one instrument disinfectant was investigated at 4% for 15 min, 3% for 30 min and 2% for 60 min [Korsolex basic, based on glutaraldehyde and (ethylenedioxy)dimethanol]. Three types of organic load were used: 0.3% albumin, 10% fetal calf serum, and 0.3% albumin with 0.3% sheep erythrocytes. Virus titres were determined by a quantitative test (endpoint titration) in 96-well microtitre plates. With all tested preparations, SARS-CoV was inactivated to below the limit of detection (reduction factor mostly > or =4), regardless of the type of organic load. In summary, SARS-CoV can be inactivated quite easily with many commonly used disinfectants.

  12. Calibration of dual-frequency SAR ocean imagery

    NASA Technical Reports Server (NTRS)

    Kasischke, E. S.; Larson, R. W.; Lyzenga, D. R.

    1986-01-01

    A calibration procedure for digital aircraft SAR imagery is presented. Techniques to utilize internal and external calibration references are discussed. Examples of calibrated intensity scans from an oceanographic test site are presented. The relationship of the aircraft SAR calibration procedure to future spaceborne SAR systems is discussed.

  13. Severe Acute Respiratory Syndrome (SARS) Prevention in Taiwan

    ERIC Educational Resources Information Center

    Liu, Hsueh-Erh

    2004-01-01

    Severe Acute Respiratory Syndrome (SARS) is a newly identified respiratory disease that threatened Taiwan between April 14 and July 5, 2003. Chang Gung University experienced various SARS-related episodes, such as the postponement of classes for 7 days, the reporting of probable SARS cases, and the isolation of students under Level A and B…

  14. SAR imagery using chaotic carrier frequency agility pulses

    NASA Astrophysics Data System (ADS)

    Xu, Xiaojian; Feng, Xiangzhi

    2011-06-01

    Synthetic aperture radar (SAR) systems are getting more and more applications in both civilian and military remote sensing missions. With the increasing deployment of electronic countermeasures (ECM) on modern battlefields, SAR encounters more and more interference jamming signals. The ECM jamming signals cause the SAR system to receive and process erroneous information which results in severe degradations in the output SAR images and/or formation of phony images of nonexistent targets. As a consequence, development of the electronic counter-countermeasures (ECCM) capability becomes one of the key problems in SAR system design. This paper develops radar signaling strategies and algorithms that enhance the ability of synthetic aperture radar to image targets under conditions of electronic jamming. The concept of SAR using chaotic carrier frequency agility pulses (CCFAP-SAR) is first proposed. Then the imaging procedure for CCFAP-SAR is discussed in detail. The ECCM performance of CCFAP-SAR for both depressive noise jamming and deceptive repeat jamming is analyzed. The impact of the carrier frequency agility range on the image quality of CCFAP-SAR is also studied. Simulation results demonstrate that, with adequate agility range of the carrier frequency, the proposed CCFAP-SAR performs as well as conventional radar with linear frequency modulation (LFM) waveform in image quality and slightly better in anti-noise depressive jamming; while performs very well in anti-deception jamming which cannot be rejected by LFM-SAR.

  15. Deformation analysis through the SBAS-DInSAR technique and geotechnical methods for structural damage assessment

    NASA Astrophysics Data System (ADS)

    Bonano, M.; Arangio, S.; Calò, F.; Di Mauro, M.; Manunta, M.; Marsella, M.; Sansosti, E.; Sonnessa, A.; Tagliafierro, V.; Lanari, R.

    2012-04-01

    Monitoring of displacements affecting single buildings or human-made infrastructures is of key importance for their diagnostic and damage assessment. The evaluation of the structural damage in urban areas is a critical problem related to the complexity of soil-structure interaction. Indeed, the structural damage is influenced by several factors, such as the uniformity of the settlements, the variability on the soil property, the type of foundations, the rigidity and type of the considered structure, as well as the rate at which the settlements occur. Concerning this latter issue, settlements occurring very slowly over periods of decades or more may be tolerable by masonry or reinforced concrete structures; on the other hand, the same settlements related to a few months or a few years would result in severe structural damage. In this context, remote sensing techniques allow non-invasive and non-destructive deformation analyses over large areas by properly exploiting a large number of space-borne radar data. Within this framework, Differential SAR Interferometry (DInSAR) has emerged as a valuable microwave methodology to detect and monitor ground displacements, with centimeter to millimeter accuracy, by exploiting the phase difference (interferogram) between two SAR images relevant to the same area. Recent developments of advanced DInSAR techniques are aimed at investigating not only single event deformation phenomena, but also the temporal evolution of the detected displacements through the generation of deformation time-series. These approaches benefit of the availability of huge archives of SAR data, including the ones acquired over the last 20 years by the Synthetic Aperture Radar (SAR) sensors on-board the ERS-1/2 and ENVISAT satellites of the European Space Agency (ESA). Among these advanced DInSAR approaches, we focus on the Small BAseline Subset (SBAS) algorithm (Berardino et al., 2002) that implements an easy combination of DInSAR data pairs characterized by

  16. [Effects of soil fertility and nitrogen application rate on nitrogen absorption and translocation, grain yield, and grain protein content of wheat].

    PubMed

    Wang, Yuefu; Yu, Zhenwen; Li, Xiangxia; Yu, Songlie

    2003-11-01

    The results of this study showed that nitrogen application improved the nitrogen uptake by wheat, especially during its late growth stage. Although a higher nitrogen application rate could increase the amount of absorbed nitrogen, an excess of nitrogen would remain in vegetative organs at the stage after flowering, owing to the low translocation rate of nitrogen from these organs to the grain, and hence, the nitrogen use efficiency and nitrogen harvest index were decreased. Compared with that on high fertility soil, the ratio of nitrogen absorbed from fertilizer to total absorbed nitrogen was higher when the wheat was grown on low fertility soil. On high fertility soil, wheat plant absorbed more nitrogen from top-dressed fertilizer than from basis fertilizer, and top-dressed fertilizer contributed more nitrogen to the grain. It was reversed on low fertility soil.

  17. Geocoding of AIRSAR/TOPSAR SAR Data

    NASA Technical Reports Server (NTRS)

    Holecz, Francesco; Lou, Yun-Ling; vanZyl, Jakob

    1996-01-01

    It has been demonstrated and recognized that radar interferometry is a promising method for the determination of digital elevation information and terrain slope from Synthetic Aperture Radar (SAR) data. An important application of Interferometric SAR (InSAR) data in areas with topographic variations is that the derived elevation and slope can be directly used for the absolute radiometric calibration of the amplitude SAR data as well as for scattering mechanisms analysis. On the other hand polarimetric SAR data has long been recognized as permitting a more complete inference of natural surfaces than a single channel radar system. In fact, imaging polarimetry provides the measurement of the amplitude and relative phase of all transmit and receive polarizations. On board the NASA DC-8 aircraft, NASA/JPL operates the multifrequency (P, L and C bands) multipolarimetric radar AIRSAR. The TOPSAR, a special mode of the AIRSAR system, is able to collect single-pass interferometric C- and/or L-band VV polarized data. A possible configuration of the AIRSAR/TOPSAR system is to acquire single-pass interferometric data at C-band VV polarization and polarimetric radar data at the two other lower frequencies. The advantage of this system configuration is to get digital topography information at the same time the radar data is collected. The digital elevation information can therefore be used to correctly calibrate the SAR data. This step is directly included in the new AIRSAR Integrated Processor. This processor uses a modification of the full motion compensation algorithm described by Madsen et al. (1993). However, the Digital Elevation Model (DEM) with the additional products such as local incidence angle map, and the SAR data are in a geometry which is not convenient, since especially DEMs must be referred to a specific cartographic reference system. Furthermore, geocoding of SAR data is important for multisensor and/or multitemporal purposes. In this paper, a procedure to

  18. Estimating IMU heading error from SAR images.

    SciTech Connect

    Doerry, Armin Walter

    2009-03-01

    Angular orientation errors of the real antenna for Synthetic Aperture Radar (SAR) will manifest as undesired illumination gradients in SAR images. These gradients can be measured, and the pointing error can be calculated. This can be done for single images, but done more robustly using multi-image methods. Several methods are provided in this report. The pointing error can then be fed back to the navigation Kalman filter to correct for problematic heading (yaw) error drift. This can mitigate the need for uncomfortable and undesired IMU alignment maneuvers such as S-turns.

  19. Unsupervised Segmentation Of Polarimetric SAR Data

    NASA Technical Reports Server (NTRS)

    Rignot, Eric J.; Dubois, Pascale; Van Zyl, Jakob; Kwok, Ronald; Chellappa, Rama

    1994-01-01

    Method of unsupervised segmentation of polarimetric synthetic-aperture-radar (SAR) image data into classes involves selection of classes on basis of multidimensional fuzzy clustering of logarithms of parameters of polarimetric covariance matrix. Data in each class represent parts of image wherein polarimetric SAR backscattering characteristics of terrain regarded as homogeneous. Desirable to have each class represent type of terrain, sea ice, or ocean surface distinguishable from other types via backscattering characteristics. Unsupervised classification does not require training areas, is nearly automated computerized process, and provides nonsubjective selection of image classes naturally well separated by radar.

  20. Mapping slope movements in Alpine environments using TerraSAR-X interferometric methods

    NASA Astrophysics Data System (ADS)

    Barboux, Chloé; Strozzi, Tazio; Delaloye, Reynald; Wegmüller, Urs; Collet, Claude

    2015-11-01

    Mapping slope movements in Alpine environments is an increasingly important task in the context of climate change and natural hazard management. We propose the detection, mapping and inventorying of slope movements using different interferometric methods based on TerraSAR-X satellite images. Differential SAR interferograms (DInSAR), Persistent Scatterer Interferometry (PSI), Short-Baseline Interferometry (SBAS) and a semi-automated texture image analysis are presented and compared in order to determine their contribution for the automatic detection and mapping of slope movements of various velocity rates encountered in Alpine environments. Investigations are conducted in a study region of about 6 km × 6 km located in the Western Swiss Alps using a unique large data set of 140 DInSAR scenes computed from 51 summer TerraSAR-X (TSX) acquisitions from 2008 to 2012. We found that PSI is able to precisely detect only points moving with velocities below 3.5 cm/yr in the LOS, with a root mean squared error of about 0.58 cm/yr compared to DGPS records. SBAS employed with 11 days summer interferograms increases the range of detectable movements to rates up to 35 cm/yr in the LOS with a root mean squared error of 6.36 cm/yr, but inaccurate measurements due to phase unwrapping are already possible for velocity rates larger than 20 cm/year. With the semi-automated texture image analysis the rough estimation of the velocity rates over an outlined moving zone is accurate for rates of "cm/day", "dm/month" and "cm/month", but due to the decorrelation of yearly TSX interferograms this method fails for the observation of slow movements in the "cm/yr" range.

  1. The 2010 slow slip event and secular motion at Kilauea, Hawai`i inferred from TerraSAR-X InSAR data

    USGS Publications Warehouse

    Chen, Jingyi; Zebker, Howard A.; Segall, Paul; Miklius, Asta

    2014-01-01

    We present here an Small BAseline Subset (SBAS) algorithm to extract both transient and secular ground deformations on the order of millimeters in the presence of tropospheric noise on the order of centimeters, when the transient is of short duration and known time, and the background deformation is smooth in time. We applied this algorithm to study the 2010 slow slip event as well as the secular motion of Kīlauea's south flank using 49 TerraSAR-X images. We also estimate the tropospheric delay variation relative to a given reference pixel using an InSAR SBAS approach. We compare the InSAR SBAS solution for both ground deformation and tropospheric delays with existing GPS measurements and confirm that the ground deformation signal andtropospheric noise in InSAR data are successfully separated. We observe that the coastal region on the south side of the Hilina Pali moves at a higher background rate than the region north side of the Pali. We also conclude that the 2010 SSE displacement is mainly horizontal and the maximum magnitude of the 2010 SSE vertical component is less than 5 mm.

  2. A novel RF-based propagation model with tissue absorption for location of the GI tract.

    PubMed

    Wang, Lujia; Liu, Li; Hu, Chao; Meng, Max Q

    2010-01-01

    In order to accurately estimate (build) the radio signal propagation attenuation model, especially inside the gastro-intestine (GI) tract of the human body, the Radio Frequency (RF) absorption characterization in human body is investigated. This characterization provides a criterion to design the Received Signal Strength (RSS) based localization system for the objective inside the human body. In this paper, the Specific Absorption Rate (SAR), E-field, H-field of the near and far field are investigated at frequencies of 434MHz, 868MHz, 1.2GHz and 2.4GHz respectively. Then, the numerical electromagnetic analysis with the finite-differencetime-domain (FDTD) is applied to model the in vivo radio propagation channels by using a dipole antenna. Finally, simulation experiments are carried out in homogenous and heterogeneous mediums. The results show that the electromagnetic (EM) propagation is not only distance and orientation dependent, but also tissue absorption dependent in human body. The proposed model is in agreement with measurements in the simulation experiments.

  3. Mars Mission Concepts: SAR and Solar Electric Propulsion

    NASA Astrophysics Data System (ADS)

    Elsperman, Michael; Clifford, S.; Lawrence, S.; Klaus, K.; Smith, D.

    2013-10-01

    Introduction: The time has come to leverage technology advances to reduce the cost and increase the flight rate of planetary missions, while actively developing a scientific and engineering workforce to achieve national space objectives. Mission Science at Mars: A SAR imaging radar offers an ability to conduct high resolution investigations of the shallow subsurface of Mars, enabling identification of fine-scale layering within the Martian polar layered deposits (PLD), as well as the identification of pingos, investigations of polygonal terrain, and measurements of the thickness of mantling layers at non-polar latitudes. It would allow systematic near-surface prospecting, which is tremendously useful for human exploration purposes. Limited color capabilities in a notional high-resolution stereo imaging system would enable the generation of false color images, resulting in useful science results, and the stereo data could be reduced into high-resolution Digital Elevation Models uniquely useful for exploration planning and science purposes. Mission Concept: Using a common spacecraft for multiple missions reduces costs. Solar electric propulsion (SEP) provides the flexibility required for multiple mission objectives. Our concept involves using a Boeing 702SP with a highly capable SAR imager that also conducts autonomous rendezvous and docking experiments accomplished from Mars orbit. Summary/Conclusions: A robust and compelling Mars mission can be designed to meet the 2018 Mars launch window opportunity. Using advanced in-space power and propulsion technologies like High Power Solar Electric Propulsion provides enormous mission flexibility to execute the baseline science mission and conduct necessary Mars Sample Return Technology Demonstrations in Mars orbit on the same mission. An observation spacecraft platform like the high power 5Kw) 702SP at Mars also enables the use of a SAR instrument to reveal new insights and understanding of the Mars regolith for both

  4. ABSORPTION ANALYZER

    DOEpatents

    Brooksbank, W.A. Jr.; Leddicotte, G.W.; Strain, J.E.; Hendon, H.H. Jr.

    1961-11-14

    A means was developed for continuously computing and indicating the isotopic assay of a process solution and for automatically controlling the process output of isotope separation equipment to provide a continuous output of the desired isotopic ratio. A counter tube is surrounded with a sample to be analyzed so that the tube is exactly in the center of the sample. A source of fast neutrons is provided and is spaced from the sample. The neutrons from the source are thermalized by causing them to pass through a neutron moderator, and the neutrons are allowed to diffuse radially through the sample to actuate the counter. A reference counter in a known sample of pure solvent is also actuated by the thermal neutrons from the neutron source. The number of neutrons which actuate the detectors is a function of a concentration of the elements in solution and their neutron absorption cross sections. The pulses produced by the detectors responsive to each neu tron passing therethrough are amplified and counted. The respective times required to accumulate a selected number of counts are measured by associated timing devices. The concentration of a particular element in solution may be determined by utilizing the following relation: T2/Ti = BCR, where B is a constant proportional to the absorption cross sections, T2 is the time of count collection for the unknown solution, Ti is the time of count collection for the pure solvent, R is the isotopic ratlo, and C is the molar concentration of the element to be determined. Knowing the slope constant B for any element and when the chemical concentration is known, the isotopic concentration may be readily determined, and conversely when the isotopic ratio is known, the chemical concentrations may be determined. (AEC)

  5. Sinking Chao Phraya delta plain, Thailand, derived from SAR interferometry time series analysis

    NASA Astrophysics Data System (ADS)

    Tanaka, A.; Mio, A.; Saito, Y.

    2013-12-01

    The Bangkok Metropolitan region and its surrounding provinces are located in a low-lying delta plain of the Chao Phraya River. Extensive groundwater use from the late 1950s has caused the decline of groundwater levels in the aquifers and Holocene clay compaction beneath the Bangkok Region, resulting in significant subsidence of the ground. This ground deformation has been monitored using leveling surveys since 1978, and differential InSAR (Interferometric Synthetic Aperture Radar) analysis. It shows that the Bangkok Metropolitan region is subsiding at a rate of about 20 mm/year during the recent years due to law-limited groundwater pumping, although the highest subsidence rate as high as 120 mm/year was recorded in 1981. The subsidence rate in the Bangkok area has significantly decreased since the late 1980s; however, the affected area has spread out to the surrounding areas. The maximum subsidence rate up to 30 mm/year occurred in the outlying southeast and southwest coastal zones in 2002. In this study, we apply a SAR interferometry time series analysis to monitor ground deformations in the lower Chao Phraya delta plain (Lower Central Plain), Thailand, using ALOS (Advanced Land Observing Satellite) PALSAR (Phased Array type L-band SAR) data acquired between July 2007 and September 2010. We derive a single reference time series interferogram from the stacking of unwrapped phases under the assumptions that those phases are smoothly and continuously connected, and apply a smoothness-constrained inversion algorithm that optimizes the displacement from the phase unwrapping of multitemporal differential SAR interferograms. The SAR interferometry time series analysis succeeds to monitor the incremental line-of-sight (LOS)-change between SAR scene acquisitions. LOS displacements are converted to vertical displacements, based on the assumption that the ground displacement in this area occurs only in the vertical directions. This reveals an overall pattern of subsidence

  6. Very low rate compression of speckled SAR imagery

    SciTech Connect

    Eichel, P.H.; Ives, R.W.

    1998-01-01

    Synthetic aperture radars produce coherent, and speckled, high resolution images of the ground. Because modern systems can generate large amounts of imagery, there is substantial interest in applying image compression techniques to these products. In this paper, the authors examine the properties of speckled imagery relevant to the task of data compression. In particular, they demonstrate the advisability of compressing the speckle mean function rather than the literal image. The theory, methodology, and an example are presented.

  7. Quantum-SAR extension of the spectral-SAR algorithm: application to polyphenolic anticancer bioactivity.

    PubMed

    Putz, Mihai V; Putz, Ana-Maria; Lazea, Marius; Ienciu, Luciana; Chiriac, Adrian

    2009-03-01

    Aiming to assess the role of individual molecular structures in the molecular mechanism of ligand-receptor interaction correlation analysis, the recent Spectral-SAR approach is employed to introduce the Quantum-SAR (QuaSAR) "wave" and "conversion factor" in terms of difference between inter-endpoint inter-molecular activities for a given set of compounds; this may account for inter-conversion (metabolization) of molecular (concentration) effects while indicating the structural (quantum) based influential/detrimental role on bio-/eco- effect in a causal manner rather than by simple inspection of measured values; the introduced QuaSAR method is then illustrated for a study of the activity of a series of flavonoids on breast cancer resistance protein.

  8. Quantum-SAR Extension of the Spectral-SAR Algorithm. Application to Polyphenolic Anticancer Bioactivity

    PubMed Central

    Putz, Mihai V.; Putz, Ana-Maria; Lazea, Marius; Ienciu, Luciana; Chiriac, Adrian

    2009-01-01

    Aiming to assess the role of individual molecular structures in the molecular mechanism of ligand-receptor interaction correlation analysis, the recent Spectral-SAR approach is employed to introduce the Quantum-SAR (QuaSAR) “wave” and “conversion factor” in terms of difference between inter-endpoint inter-molecular activities for a given set of compounds; this may account for inter-conversion (metabolization) of molecular (concentration) effects while indicating the structural (quantum) based influential/detrimental role on bio-/eco- effect in a causal manner rather than by simple inspection of measured values; the introduced QuaSAR method is then illustrated for a study of the activity of a series of flavonoids on breast cancer resistance protein. PMID:19399244

  9. Design and realization of an active SAR calibrator for TerraSAR-X

    NASA Astrophysics Data System (ADS)

    Dummer, Georg; Lenz, Rainer; Lutz, Benjamin; Kühl, Markus; Müller-Glaser, Klaus D.; Wiesbeck, Werner

    2005-10-01

    TerraSAR-X is a new earth observing satellite which will be launched in spring 2006. It carries a high resolution X-band SAR sensor. For high image data quality, accurate ground calibration targets are necessary. This paper describes a novel system concept for an active and highly integrated, digitally controlled SAR system calibrator. A total of 16 active transponder and receiver systems and 17 receiver only systems will be fabricated for a calibration campaign. The calibration units serve for absolute radiometric calibration of the SAR image data. Additionally, they are equipped with an extra receiver path for two dimensional satellite antenna pattern recognition. The calibrator is controlled by a dedicated digital Electronic Control Unit (ECU). The different voltages needed by the calibrator and the ECU are provided by the third main unit called Power Management Unit (PMU).

  10. An Optical Flow Method Applied to Co-Registration of Remote Sensing Images: Example for SAR/SAR, SAR/LIDAR, SAR/Optical Images of BIOSAR 2010 Campaign

    NASA Astrophysics Data System (ADS)

    Colin-Koeniguer, Elise

    2016-08-01

    This article proposes an optical flow type method for coregistration of forest remote sensing images. The principle of the algorithm called GeFolki is first explained. Results are shown on the images of the BioSAR 3 campaign, for the production of SAR interferograms, the coregistration a SAR and LIDAR image, and the coregistration an optical image and SAR image.The advantages of such an algorithm over conventional algorithms are explained. Finally, we propose various applications within the operating data for future BIOMASS mission: massive interferometry, ground truth production, upscaling by fusion of LIDAR and SAR data, and image mining.

  11. Using InSAR for Characterizing Pyroclastic Flow Deposits at Augustine Volcano Across Two Eruptive Cycles

    NASA Astrophysics Data System (ADS)

    McAlpin, D. B.; Meyer, F. J.; Lu, Z.; Beget, J. E.

    2014-12-01

    Augustine Island is a small, 8x11 km island in South Central Alaska's lower Cook Inlet. It is approximately 280 km southwest of Anchorage, and occupied entirely by its namesake Augustine Volcano. At Augustine Volcano, SAR data suitable for interferometry is available from 1992 to 2005, from March 2006 to April 2007, and from July 2007 to October 2010. Its last two eruptive episodes, in 1986 and 2006, resulted in substantial pyroclastic flow deposits (PFDs) on the Volcano's north flank. Earlier InSAR analyses of the area, from 1992-1999, identified local subsidence, but no volcano-wide deformation indicative of magma-chamber evacuation. In contrast to previous studies, we use InSAR data to determine a range of geophysical parameters for PFDs emplaced during the Augustine's two most recent eruption cycles. Based on InSAR measurements between 1992 and 2010, we reconstruct the deformation behavior of PFDs emplaced during Augustine's last two eruption cycles. Using a combination of InSAR measurements and modeling, we determine the thickness and long-term deformation of overlaying pyroclastic flow deposits emplaced in 1986 and 2006. Consistent with previous observations of pyroclastic flows, we found that the PFDs on Augustine Island rapidly subsided after emplacement due to an initial compaction of the material. We determined the length of this initial settling period and measured the compaction rate. Subsequent to this initial rapid subsidence, we found that PFD deformation slowed to a more persistent, linear, long-term rate, related to cooling of the deposits. We established that the deposits' contraction rate is linearly related to their thickness and measured the contraction rate. Finally, a study of long term coherence properties of the Augustine PFDs showed remarkable stability of the surface over long time periods. This information provides clues on the structural properties and composition of the emplaced material.

  12. Direct and Quantitative Photothermal Absorption Spectroscopy of Individual Particulates

    DTIC Science & Technology

    2013-01-01

    photovoltaics and photo detectors.17,22,23 To predict the absorptive properties of an individual silicon microwire, the well-established Mie theory was... silicon microwire is frequency limiting .43 It was also observed that vibration, thermal drift, and electrical noise were significant below 100 Hz. In...NOTES 14. ABSTRACT 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT Same as Report (SAR) 18. NUMBER OF PAGES 7

  13. Cryosat-2 SAR and SAR-In Altimetry for Coastal Sea Level

    NASA Astrophysics Data System (ADS)

    Baltazar Andersen, Ole; Knudsen, Per; Abulaitijiang, Adil; Stenseng, Lars

    2015-04-01

    Cryosat-2 offers the first ever possibility to perform coastal altimetric studies using SAR-Interferometry as well as SAR altimetry. With this technological leap forward Cryosat-2 is now able to observe sea level in very small water bodies and also to provide coastal sea level very close to the shore. We perform an investigation into the retrieval of sea surface height around Denmark and Greenland. These regions have been chosen as the coastal regions around Denmark falls within the SAR mask and the coastal regions of Greenland falls in under the SAR-in mask employed on Cryosat-2. SAR-in was mainly used in coastal regions of Greenland because of its huge topographic changes as Cryosat-2 is designed to map the margins of the ice-sheet. The coastal region around Denmark is a test region of the EU sponsored project LOTUS in which With the increased spatial resolution of Cryosat-2 SAR we provide valuable sea level observations within the Straits around Denmark which are crucial to constrain the waterflow in and out of the Baltic Sea. The investigation of SAR-in data in Greenland adds an entire new dimension to coastal altimetry. An amazing result of the investigation is the ability of Cryosat-2 to detect and recover sea level even though the coast (sealevel) is up to 15 km away from the nadir location of the satellite. This ability of capture and use returns from outside the main (-3Db) loop in theory enables Cryosat-2 SAR-in to map sea level height of fjords more frequently than the 369 days repeat.

  14. Calculation of SAR and temperature rise in a high-resolution vascularized model of the human eye and orbit when exposed to a dipole antenna at 900, 1500 and 1800 MHz

    NASA Astrophysics Data System (ADS)

    Flyckt, V. M. M.; Raaymakers, B. W.; Kroeze, H.; Lagendijk, J. J. W.

    2007-05-01

    The eye is considered to be a critical organ when determining safety standards for radiofrequency radiation. With a detailed anatomy of the human eye and orbit inserted in a whole-head model, the specific absorption rates (SARs) and thermal effects were determined under exposure to a dipole antenna representing a mobile phone operating at 900, 1500 and 1800 MHz with an output power of 1 W. The temperature rise was calculated by taking the blood flow into account either by the Pennes bioheat model or by including the discrete vasculature (DIVA). In addition, a simple spherical model using constant heat transfer coefficients was used. Peak SARs in the humour are 4.5, 7.7 and 8.4 W kg-1 for 900, 1500 and 1800 MHz respectively. Averaged over the whole eyeball, the SARs are 1.7, 2.5 and 2.2 W kg-1. The maximum temperature rises in the eye due to the exposure are 0.22, 0.27 and 0.25 °C for exposure of 900, 1500 and 1800 MHz, respectively, calculated with DIVA. For the Pennes bioheat model, the temperature rises are slightly lower: 0.19, 0.24, 0.22 °C respectively. For the simple spherical model, the maximum temperature rises are 0.15, 0.22 and 0.20 °C. The peak temperature is located in the anterior part of the lens for 900 MHz and deeper in the eye for higher frequencies, and in the posterior part of the lens for 1500 MHz and close to the centre of the eyeball for 1800 MHz. For these RF safety applications, both DIVA and the Pennes bioheat model could be used to relate the SAR distributions to the resulting temperature distributions. Even though, for these artificial exposure conditions, the SAR values are not in compliance with safety guidelines, the maximum temperature rises in the eye are too small to give harmful effects. The temperature in the eye also remains below body core temperature.

  15. Calculation of SAR and temperature rise in a high-resolution vascularized model of the human eye and orbit when exposed to a dipole antenna at 900, 1500 and 1800 MHz.

    PubMed

    Flyckt, V M M; Raaymakers, B W; Kroeze, H; Lagendijk, J J W

    2007-05-21

    The eye is considered to be a critical organ when determining safety standards for radiofrequency radiation. With a detailed anatomy of the human eye and orbit inserted in a whole-head model, the specific absorption rates (SARs) and thermal effects were determined under exposure to a dipole antenna representing a mobile phone operating at 900, 1500 and 1800 MHz with an output power of 1 W. The temperature rise was calculated by taking the blood flow into account either by the Pennes bioheat model or by including the discrete vasculature (DIVA). In addition, a simple spherical model using constant heat transfer coefficients was used. Peak SARs in the humour are 4.5, 7.7 and 8.4 W kg(-1) for 900, 1500 and 1800 MHz respectively. Averaged over the whole eyeball, the SARs are 1.7, 2.5 and 2.2 W kg(-1). The maximum temperature rises in the eye due to the exposure are 0.22, 0.27 and 0.25 degrees C for exposure of 900, 1500 and 1800 MHz, respectively, calculated with DIVA. For the Pennes bioheat model, the temperature rises are slightly lower: 0.19, 0.24, 0.22 degrees C respectively. For the simple spherical model, the maximum temperature rises are 0.15, 0.22 and 0.20 degrees C. The peak temperature is located in the anterior part of the lens for 900 MHz and deeper in the eye for higher frequencies, and in the posterior part of the lens for 1500 MHz and close to the centre of the eyeball for 1800 MHz. For these RF safety applications, both DIVA and the Pennes bioheat model could be used to relate the SAR distributions to the resulting temperature distributions. Even though, for these artificial exposure conditions, the SAR values are not in compliance with safety guidelines, the maximum temperature rises in the eye are too small to give harmful effects. The temperature in the eye also remains below body core temperature.

  16. Infrequent transitions between saline and fresh waters in one of the most abundant microbial lineages (SAR11).

    PubMed

    Logares, Ramiro; Bråte, Jon; Heinrich, Friederike; Shalchian-Tabrizi, Kamran; Bertilsson, Stefan

    2010-02-01

    The aquatic bacterial group SAR11 is one of the most abundant organisms on Earth, with an estimated global population size of 2.4 x 10(28) cells in the oceans. Members of SAR11 have also been detected in brackish and fresh waters, but the evolutionary relationships between the species present in the different environments have been ambiguous. In particular, it was not clear how frequently this lineage has crossed the saline-freshwater boundary during its evolutionary diversification. Due to the huge population size of SAR11 and the potential of microbes for long-distance dispersal, we hypothesized that environmental transitions could have occurred repeatedly during the evolutionary diversification of this group. Here, we have constructed extensive 16S rDNA-based molecular phylogenies and undertaken metagenomic data analyses to assess the frequency of saline-freshwater transitions in SAR11 and to investigate the evolutionary implications of this process. Our analyses indicated that very few saline-freshwater transitions occurred during the evolutionary diversification of SAR11, generating genetically distinct saline and freshwater lineages that do not appear to exchange genes extensively via horizontal gene transfer. In contrast to lineages from saline environments, extant freshwater taxa from diverse, and sometimes distant, geographic locations were very closely related. This points to a rapid diversification and dispersal in fresh waters or to slower evolutionary rates in fresh water SAR11 when compared with marine counterparts. In addition, the colonization of both saline and fresh waters appears to have occurred early in the evolution of SAR11. We conclude that the different biogeochemical conditions that prevail in saline and fresh waters have likely prevented the environmental transitions in SAR11, promoting the evolution of clearly distinct lineages in each environment.

  17. Ambiguity noise analysis of a SAR system

    NASA Astrophysics Data System (ADS)

    Tian, Haishan; Chang, Wenge; Li, Xiangyang

    2015-12-01

    The presence of range and azimuth (or Doppler) ambiguities in synthetic aperture radars (SARs) is well known. The ambiguity noise is related to the antenna pattern and the value of pulse repetition frequency (PRF). Because a new frequency modulated continuous wave (FMCW) SAR has the characters of low cost and small size, and the capacity of real-time signal processing, the antenna will likely vibrate or deform due to a lack of the stabilized platform. And the value of PRF cannot be much high because of the high computation burden for the real-time processing. The aim of this study is to access and improve the performance of a new FMCW SAR system based on the ambiguity noise. First, the quantitative analysis of the system's ambiguity noise level is performed; an antenna with low sidelobes is designed. The conclusion is that the range ambiguity noise is small; the azimuth ambiguity noise is somewhat increased, however, it is sufficiently small to have marginal influence on the image quality. Finally, the ambiguity noise level is measured using the imaging data from a Ku-band FMCW SAR. The results of this study show that the measured noise level coincides with the theoretical noise level.

  18. SAR Image Texture Analysis of Oil Spill

    NASA Astrophysics Data System (ADS)

    Ma, Long; Li, Ying; Liu, Yu

    Oil spills are seriously affecting the marine ecosystem and cause political and scientific concern since they have serious affect on fragile marine and coastal ecosystem. In order to implement an emergency in case of oil spills, it is necessary to monitor oil spill using remote sensing. Spaceborne SAR is considered a promising method to monitor oil spill, which causes attention from many researchers. However, research in SAR image texture analysis of oil spill is rarely reported. On 7 December 2007, a crane-carrying barge hit the Hong Kong-registered tanker "Hebei Spirit", which released an estimated 10,500 metric tons of crude oil into the sea. The texture features on this oil spill were acquired based on extracted GLCM (Grey Level Co-occurrence Matrix) by using SAR as data source. The affected area was extracted successfully after evaluating capabilities of different texture features to monitor the oil spill. The results revealed that the texture is an important feature for oil spill monitoring. Key words: oil spill, texture analysis, SAR

  19. SAR observations of waves in ice

    NASA Astrophysics Data System (ADS)

    De Carolis, Giacomo

    2003-03-01

    Ocean waves properties propagating in grease ice composed of frazil and pancakes as observed by SAR images are discussed. An ERS-2 SAR scene relevant to the Greenland Sea in an area where the Odden ice tongue developed in 1997 is considered as case study. The scene includes open sea and ice covered waters where a wave field is traveling from the open sea region. Wind induced features known as "wind rolls" can be distinguished, allowing the estimation of the wind vector. Hence the related wind generated ocean waves can be retrieved using a SAR spectral inversion procedure. The wave field is tracked while it propagates inside the ice field, thus allowing the estimation of the wave changes. Under the assumption of continuum medium, physical ice properties are then retrieved using a special SAR inversion procedure in conjunction with a recently developed wave propagation model in sea ice. The model assumes both the ice layer and the water beneath it as a system of viscous fluids. As a result, the changes suffered by the ocean wave spectrum in terms of wave dispersion and energy attenuation are related to sea ice properties such as concentration and thickness. Although the free parameters to be inverted are the ice thickness and viscosity and the water viscosity, the ice thickness is the only parameter of geophysical interest. Results are finally compared with external ice parameters information.

  20. Epidemic Models for SARS and Measles

    ERIC Educational Resources Information Center

    Rozema, Edward

    2007-01-01

    Recent events have led to an increased interest in emerging infectious diseases. This article applies various deterministic models to the SARS epidemic of 2003 and a measles outbreak in the Netherlands in 1999-2000. We take a historical approach beginning with the well-known logistic curve and a lesser-known extension popularized by Pearl and Reed…

  1. SAR Image Despeckling Via Structural Sparse Representation

    NASA Astrophysics Data System (ADS)

    Lu, Ting; Li, Shutao; Fang, Leyuan; Benediktsson, Jón Atli

    2016-12-01

    A novel synthetic aperture radar (SAR) image despeckling method based on structural sparse representation is introduced. The proposed method utilizes the fact that different regions in SAR images correspond to varying terrain reflectivity. Therefore, SAR images can be split into a heterogeneous class (with a varied terrain reflectivity) and a homogeneous class (with a constant terrain reflectivity). In the proposed method, different sparse representation based despeckling schemes are designed by combining the different region characteristics in SAR images. For heterogeneous regions with rich structure and texture information, structural dictionaries are learned to appropriately represent varied structural characteristics. Specifically, each patch in these regions is sparsely coded with the best fitted structural dictionary, thus good structure preservation can be obtained. For homogenous regions without rich structure and texture information, the highly redundant photometric self-similarity is exploited to suppress speckle noise without introducing artifacts. That is achieved by firstly learning the sub-dictionary, then simultaneously sparsely coding for each group of photometrically similar image patches. Visual and objective experimental results demonstrate the superiority of the proposed method over the-state-of-the-art methods.

  2. JERS SAR interferometry for land subsidence monitoring

    NASA Astrophysics Data System (ADS)

    Strozzi, Tazio; Wegmüller, Urs; Werner, Charles; Wiesmann, Andreas

    2002-01-01

    In this paper the potential of L-Band repeat-pass differential SAR interferometry for land subsidence monitoring is evaluated using JERS SAR data. Bologna, Mexico City and the Ruhrgebiet were selected as application sites representing slow to fast deformation velocities. The investigation includes feasibility aspects as the data availability, the temporal decorrelation over different landcover classes and the range of useful spatial baselines, an analysis of the achieved deformation accuracy and considerations on the complementarity to ERS SAR interferometry and levelling surveys. In spite of the rather limited data availability, land subsidence maps could be generated for the three selected application sites. Unlike with ERS C-Band SAR data, JERS L-Band interferometry permitted to retrieve subsidence values also over vegetated areas and forest when using interferograms of less than one year acquisition time interval and short baseline. In addition, the longer L-Band wavelength was found to be superior in the case of large deformation gradients that lead to phase unwrapping problems in C-Band interferometry.

  3. Herc SAR Task 106: AIMS Feature Development

    DTIC Science & Technology

    2007-03-01

    of the recommendations should be implemented, and discuss with Greenley & Associates any other features or capabilities needed. Herc-SAR Task 106...2001-029; Greenley & Associates, Ottawa, Ontario. 2. Schoenborn, O. (2006). AIMSsim User Manual. DRDC Toronto CR 2001-030; Greenley & Associates

  4. Model-based 3D SAR reconstruction

    NASA Astrophysics Data System (ADS)

    Knight, Chad; Gunther, Jake; Moon, Todd

    2014-06-01

    Three dimensional scene reconstruction with synthetic aperture radar (SAR) is desirable for target recognition and improved scene interpretability. The vertical aperture, which is critical to reconstruct 3D SAR scenes, is almost always sparsely sampled due to practical limitations, which creates an underdetermined problem. This papers explores 3D scene reconstruction using a convex model-based approach. The approach developed is demonstrated on 3D scenes, but can be extended to SAR reconstruction of sparsely sampled signals in the spatial and, or, frequency domains. The model-based approach enables knowledge-aided image formation (KAIF) by incorporating spatial, aspect, and sparsity magnitude terms into the image reconstruction. The incorporation of these terms, which are based on prior scene knowledge, will demonstrate improved results compared to traditional image formation algorithms. The SAR image formation problem is formulated as a second order cone program (SOCP) and the results are demonstrated on 3D scenes using simulated data and data from the GOTCHA data collect.1 The model-based results are contrasted against traditional backprojected images.

  5. PS-InSAR Monitoring Of Landslides In The Great Caucasus, Russia, Using Envisat, ALOS And TerraSAR-X SAR Images

    NASA Astrophysics Data System (ADS)

    Mikhailov, V.; Kiseleva, E.; Smolyaninova, E.; Golubev, V.; Dmitriev, P.; Isaev, Yu.; Dorokhin, K.; Hooper, A.; Esfahany, S.; Hanssen, R.; Khairetdinov, S.

    2013-12-01

    We investigated two landslides in the Northern Caucasus above railroad tunnels near the Kepsha and Mamayka villages using the StaMPS software. We discuss approaches to careful selection of processing strategy that is especially important in mountainous highly vegetated areas. For the rural Kepsha area we incorporated ALOS, Envisat (both ascending and descending), and TerraSAR images. For the mostly urban Mamayka area we used Envisat and TSX images. For the Kepsha landslide we found that average displacement rate in the line of site (LOS) direction (mean LOS velocitity - VLOS) do not exceed 10 mm/year, i.e. the Kepsha landslide has been stable since at least 2004.Mamayka landslide appeared to be much more active. Mean LOS velocities in the active area reach 60 mm/year. Corner reflector installed in the rural area above the tunnel permitted us to estimate VLOS equal to 49 mm/year.

  6. Post-eruptive inflation of Okmok Volcano, Alaska, from InSAR, 2008–2014

    USGS Publications Warehouse

    Qu, Feifei; Lu, Zhong; Poland, Michael; Freymueller, Jeffrey T.; Zhang, Qin; Jung, Hyung-Sup

    2016-01-01

    Okmok, a ~10-km wide caldera that occupies most of the northeastern end of Umnak Island, is one of the most active volcanoes in the Aleutian arc. The most recent eruption at Okmok during July-August 2008 was by far its largest and most explosive since at least the early 19th century. We investigate post-eruptive magma supply and storage at the volcano during 2008–2014 by analyzing all available synthetic aperture radar (SAR) images of Okmok acquired during that time period using the multi-temporal InSAR technique. Data from the C-band Envisat and X-band TerraSAR-X satellites indicate that Okmok started inflating very soon after the end of 2008 eruption at a time-variable rate of 48-130 mm/y, consistent with GPS measurements. The “model-assisted” phase unwrapping method is applied to improve the phase unwrapping operation for long temporal baseline pairs. The InSAR time-series is used as input for deformation source modeling, which suggests magma accumulating at variable rates in a shallow storage zone at ~3.9 km below sea level beneath the summit caldera, consistent with previous studies. The modeled volume accumulation in the 6 years following the 2008 eruption is ~75% of the 1997 eruption volume and ~25% of the 2008 eruption volume.

  7. A Scheme of Intelligent Oil Spill Monitoring System by SAR for Operational Application

    NASA Astrophysics Data System (ADS)

    Zeng, Kan; Ma, Youjun; Ding, Xingtao; Zhao, Chaofang; He, Mingxia

    2014-11-01

    A scheme of intelligent oil spill monitoring system by SAR for operational application is presented. The system includes four key techniques. 1) Picking out dark targets from SAR images using a new adaptive threshold segmentation algorithm based on evaluating the trends of background of SAR image along the range direction. The algorithm is applicable for SAR images of different satellites. 2) Filtering out some of look-alikes from dark targets by a chain of rules. 3) Extracting features from all the remained dark targets, selecting the most useful features and then discriminating the targets between oil spill and look-alikes by an artificial neural network (ANN). The feature extraction is based on lots of targets. The ANN experiences enough training. 4) Using an intelligent feedback with expert knowledge and relevant environment parameters to continually optimize system and improve the detection rate. So far, the test on 1448 oil spill and look-alike targets from Envisat/ASAR images shows that the correct recognition rate of the system can reach 88 % without the intelligent feedback.

  8. Detecting Land Subsidence in Shanghai by PS-Networking SAR Interferometry.

    PubMed

    Liu, Guoxiang; Luo, Xiaojun; Chen, Qiang; Huang, Dingfa; Ding, Xiaoli

    2008-08-19

    Existing studies have shown that satellite synthetic aperture radar (SAR) interferometry has two apparent drawbacks, i.e., temporal decorrelation and atmospheric contamination, in the application of deformation mapping. It is however possible to improve deformation analysis by tracking some natural or man-made objects with steady radar reflectivity, i.e., permanent scatterers (PS), in the frame of time series of SAR images acquired over the same area. For detecting land subsidence in Shanghai, China, this paper presents an attempt to explore an approach of PS-neighborhood networking SAR interferometry. With use of 26 ERS-1/2 SAR images acquired 1992 through 2002 over Shanghai, the analysis of subsiding process in time and space is performed on the basis of a strong network which is formed by connecting neighboring PSs according to a distance threshold. The linear and nonlinear subsidence, atmospheric effects as well as topographic errors can be separated effectively in this way. The subsidence velocity field in 10 years over Shanghai is also derived. It was found that the annual subsidence rates in the study area range from -2.1 to -0.6 cm/yr, and the averaged subsidence rate reaches -1.1 cm/yr.

  9. Analysis of Multipath Pixels in SAR Images

    NASA Astrophysics Data System (ADS)

    Zhao, J. W.; Wu, J. C.; Ding, X. L.; Zhang, L.; Hu, F. M.

    2016-06-01

    As the received radar signal is the sum of signal contributions overlaid in one single pixel regardless of the travel path, the multipath effect should be seriously tackled as the multiple bounce returns are added to direct scatter echoes which leads to ghost scatters. Most of the existing solution towards the multipath is to recover the signal propagation path. To facilitate the signal propagation simulation process, plenty of aspects such as sensor parameters, the geometry of the objects (shape, location, orientation, mutual position between adjacent buildings) and the physical parameters of the surface (roughness, correlation length, permittivity)which determine the strength of radar signal backscattered to the SAR sensor should be given in previous. However, it's not practical to obtain the highly detailed object model in unfamiliar area by field survey as it's a laborious work and time-consuming. In this paper, SAR imaging simulation based on RaySAR is conducted at first aiming at basic understanding of multipath effects and for further comparison. Besides of the pre-imaging simulation, the product of the after-imaging, which refers to radar images is also taken into consideration. Both Cosmo-SkyMed ascending and descending SAR images of Lupu Bridge in Shanghai are used for the experiment. As a result, the reflectivity map and signal distribution map of different bounce level are simulated and validated by 3D real model. The statistic indexes such as the phase stability, mean amplitude, amplitude dispersion, coherence and mean-sigma ratio in case of layover are analyzed with combination of the RaySAR output.

  10. Data compression for Eos on-board SAR processor

    NASA Technical Reports Server (NTRS)

    Chang, C. Y.; Fang, W. C.; Curlander, J. C.

    1989-01-01

    A lightweight, low-power, real-time data compressor design for the Earth Observing System (Eos) onboard synthetic aperture radar (SAR) processor is presented. The implementation is based on VLSI design of a pipelined binary tree-searched vector quantizer (VQ), utilizing space-qualifiable 1.25-micron CMOS technology. The implementation exploits VLSI system design principles such as the modularity, regular data flow, simple interconnection, localized communication, simple global control, and parallel/pipelined processing. The overall system requires 30 chips with only one VLSI processing element design. The total weight is about 1.2 lbs, with an estimated power dissipation of approximately 4 watts operating at the maximum input data rate. The projected throughput rate exceeds 5 MHz.

  11. Monitoring urban subsidence based on SAR lnterferometric point target analysis

    USGS Publications Warehouse

    Zhang, Y.; Zhang, Jiahua; Gong, W.; Lu, Zhiming

    2009-01-01

    lnterferometric point target analysis (IPTA) is one of the latest developments in radar interferometric processing. It is achieved by analysis of the interferometric phases of some individual point targets, which are discrete and present temporarily stable backscattering characteristics, in long temporal series of interferometric SAR images. This paper analyzes the interferometric phase model of point targets, and then addresses two key issues within IPTA process. Firstly, a spatial searching method is proposed to unwrap the interferometric phase difference between two neighboring point targets. The height residual error and linear deformation rate of each point target can then be calculated, when a global reference point with known height correction and deformation history is chosen. Secondly, a spatial-temporal filtering scheme is proposed to further separate the atmosphere phase and nonlinear deformation phase from the residual interferometric phase. Finally, an experiment of the developed IPTA methodology is conducted over Suzhou urban area. Totally 38 ERS-1/2 SAR scenes are analyzed, and the deformation information over 3 546 point targets in the time span of 1992-2002 are generated. The IPTA-derived deformation shows very good agreement with the published result, which demonstrates that the IPTA technique can be developed into an operational tool to map the ground subsidence over urban area.

  12. Microwave radiation absorption: behavioral effects.

    PubMed

    D'Andrea, J A

    1991-07-01

    The literature contains much evidence that absorption of microwave energy will lead to behavioral changes in man and laboratory animals. The changes include simple perturbations or outright stoppage of ongoing behavior. On one extreme, intense microwave absorption can result in seizures followed by death. On the other extreme, man and animals can hear microwave pulses at very low rates of absorption. Under certain conditions of exposure, animals will avoid microwaves, while under other conditions, they will actively work to obtain warmth produced by microwaves. Some research has shown behavioral effects during chronic exposure to low-level microwaves. The specific absorption rates that produce behavioral effects seem to depend on microwave frequency, but controversy exists over thresholds and mechanism of action. In all cases, however, the behavioral disruptions cease when chronic microwave exposure is terminated. Thermal changes in man and animals during microwave exposure appear to account for all reported behavioral effects.

  13. Rapid Mapping Of Floods Using SAR Data: Opportunities And Critical Aspects

    NASA Astrophysics Data System (ADS)

    Pulvirenti, Luca; Pierdicca, Nazzareno; Chini, Marco

    2013-04-01

    present other critical aspects. Searching for low SAR backscatter areas only may cause inaccuracies because flooded soils do not always act as smooth open water bodies. The presence of wind or of vegetation emerging above the water surface may give rise to an increase of the radar backscatter. In particular, mapping flooded vegetation using SAR data may represent a difficult task since backscattering phenomena in the volume between canopy, trunks and floodwater are quite complex in the presence of vegetation. A typical phenomenon is the double-bounce effect involving soil and stems or trunks, which is generally enhanced by the floodwater, so that flooded vegetation may appear very bright in a SAR image. Even in the absence of dense vegetation or wind, some regions may appear dark because of artefacts due to topography (shadowing), absorption caused by wet snow, and attenuation caused by heavy precipitating clouds (X-band SARs). Examples of the aforementioned effects that may limit the reliability of flood maps will be presented at the conference and some indications to deal with these effects (e.g. presence of vegetation and of artefacts) will be provided.

  14. Climate change effects on Glacier recession in Himalayas using Multitemporal SAR data and Automatic Weather Station observations

    NASA Astrophysics Data System (ADS)

    Kumar, V.; Singh, S. K.; Venkataraman, G.

    2009-04-01

    The Himalaya is the highest but the youngest mountain belt (20 to 60 million years B.P.) of the earth running in arc shape for about 2500 km. It has more than 90 peaks above 6000 m and contains about 50% of all glaciers outside of the polar environments (Bahadur, 1993). All glaciers in this region are in general recession since last 150 years (Paul et al.,1979). Gangotri, Siachen, Bara Shigri and Patsio are major glaciers in this region which are showing retreat with different rates and their respective tributary glaciers are completely disconnected from main body of glaciers. Spaceborne synthetic aperture radar data provide an important tool for monitoring the fluctuation of the glaciers. In this paper attempt has been made for quantifying the glacier retreat using multitemporal synthetic aperture radar (SAR) data. SAR intensity and phase information will be exploited separately under SAR intensity tracking and interferometric SAR (InSAR) coherence tracking (Strozzi et al., 2002) respectively. Glacier retreat study have been done using time series coregistered multi temporal SAR images. Simultaneously InSAR coherence thresholding is applied for tracking the snout of Gangotri glacier. It is observed that glacier is retreating at the rate of 21 m/a. Availability of high resolution spotlight mode TerraSAR-X SAR data will supplement the ENVISAT ASAR and ERS-1/2 based observations. The observatory in the proximity of Gangotri glacier has been made functional at Bhojbasa and all weather parameters viz. Snow fall, temperature, pressure, air vector, column water vapor and humidity are recorded twice a day as per WMO standards manually and automatically. Three Automatic Weather Stations (AWS) have been established in the glacier area at Bhojbasa , Kalindipass and Nandaban. Since Himalayan environment is presently under great stress of decay and degeneration, AWS data will be analyzed in the context of climate change effects on fluctuation of glaciers. References 1.Jagdish

  15. Investigating long-term subsidence at Medicine Lake Volcano, CA, using multitemporal InSAR

    NASA Astrophysics Data System (ADS)

    Parker, Amy L.; Biggs, Juliet; Lu, Zhong

    2014-11-01

    Long-term volcanic subsidence provides insight into intereruptive processes, which comprise the longest portion of the eruptive cycle. Ground-based geodetic surveys of Medicine Lake Volcano (MLV), northern CA, document subsidence at rates of ˜-10 mm yr-1 between 1954 and 2004. The long observation period plus the duration and stable magnitude of this signal presents an ideal opportunity to study long-term volcanic deformation, but this first requires accurate knowledge of the geometry and magnitude of the source. Best-fitting analytical source models to past levelling and GPS data sets show conflicting source parameters-primarily the model depth. To overcome this, we combine multiple tracks of InSAR data, each with a different look angle, to improve upon the spatial resolution of ground-based measurements. We compare the results from InSAR to those of past geodetic studies, extending the geodetic record to 2011 and demonstrating that subsidence at MLV continues at ˜-10 mm yr-1. Using geophysical inversions, we obtain the best-fitting analytical source model-a sill located at 9-10 km depth beneath the caldera. This model geometry is similar to those of past studies, providing a good fit to the high spatial density of InSAR measurements, while accounting for the high ratio of vertical to horizontal deformation derived from InSAR and recorded by existing levelling and GPS data sets. We discuss possible causes of subsidence and show that this model supports the hypothesis that deformation at MLV is driven by tectonic extension, gravitational loading, plus a component of volume loss at depth, most likely due to cooling and crystallization within the intrusive complex that underlies the edifice. Past InSAR surveys at MLV, and throughout the Cascades, are of variable success due to dense vegetation, snow cover and atmospheric artefacts. In this study, we demonstrate how InSAR may be successfully used in this setting by applying a suite of multitemporal analysis methods

  16. Integration of GPS and InSAR Measurements for Kinematic Analysis of Crustal Deformation in Taiwan

    NASA Astrophysics Data System (ADS)

    Chang, W. L.; Wang, C. C.; Liu, T. Y.; Chiu, C. Y.; Chang, C. P.

    2015-12-01

    GPS (Global Positioning System) and InSAR (Interferometric Synthetic Aperture Radar) observations have their own characteristic: GPS can measure three-dimensional (East, North, Up) ground motion in high accuracy but has relatively sparse station coverage, while InSAR can provide densely spatial measurements of surface displacement but only in one dimension (LOS direction). In this study we adapt a velocity field method to combine InSAR measurements of LOS velocities with available GPS data. This allows us to form a velocity field in the GPS reference frame with higher spatial resolution than is available from the sparse GPS data alone. We first divide study areas into triangular meshes, and assume that the velocity varies linearly with latitude and longitude (i.e., homogeneous strain) within each triangle. Therefore, the geodetic observations within each triangle are related to the velocities of its vertices by an interpolation shape function. Given observed GPS ENU and InSAR LOS velocities, we can solve a system of linear equations for unknown velocities of the triangular vertices. With this velocity field model, we can get a continuous velocity field by interpolation of the vertex velocities and further calculate the strain rate of each triangular mesh. An additional advantage of this method is that it can provide ground motion (and their uncertainties) even in areas of InSAR incoherence. We apply this method to the Taipei area and the northern Longitudinal Valley (LV) of Taiwan by combining continuous GPS data and PSInSAR (Permanent Scatter InSAR) measurements observed by Envisat and ALOS satellites. Results show that the vertical motion in the Taipei basin is episodic, with the largest strain-rate magnitude shown along the hanging-wall of the Sanchiao normal fault and the south of the Tatun volcano area. In the northern LV, ground subsidence of ~5 mm/yr is revealed, with the largest strain-rate magnitude near 23.4°~23.6°N that is consistent with an area of

  17. Photochemical properties of trans-1-chloro-3,3,3-trifluoropropene (trans-CHCl═CHCF3): OH reaction rate constant, UV and IR absorption spectra, global warming potential, and ozone depletion potential.

    PubMed

    Orkin, Vladimir L; Martynova, Larissa E; Kurylo, Michael J

    2014-07-17

    Measurements of the rate constant for the gas-phase reactions of OH radicals with trans-1-chloro-3,3,3-trifluoropropene (trans-CHCl═CHCF3) were performed using a flash photolysis resonance-fluorescence technique over the temperature range 220-370 K. The reaction rate constant exhibits a noticeable curvature of the temperature dependence in the Arrhenius plot, which can be represented by the following expression: kt-CFP (220-370 K) = 1.025 × 10(-13) × (T/298)(2.29) exp(+384/T) cm(3 )molecule(-1) s(-1). The room-temperature rate constant was determined to be kt-CFP (298 K) = (3.29 ± 0.10) × 10(-13) cm(3) molecule(-1) s(-1), where the uncertainty includes both two standard errors (statistical) and the estimated systematic error. For atmospheric modeling purposes, the rate constant below room temperature can be represented by the following expression: kt-CFP (220-298 K) = (7.20 ± 0.46) × 10(-13) exp[-(237 ± 16)/T] cm(3) molecule(-1) s(-1). There was no difference observed between the rate constants determined at 4 kPa (30 Torr) and 40 kPa (300 Torr) at both 298 and 370 K. The UV and IR absorption cross sections of this compound were measured at room temperature. The atmospheric lifetime, global warming potential, and ozone depletion potential of trans-CHCl═CHCF3 were estimated.

  18. InSAR measurements of compaction and subsidence in the Ganges-Brahmaputra Delta, Bangladesh

    NASA Astrophysics Data System (ADS)

    Higgins, Stephanie A.; Overeem, Irina; Steckler, Michael S.; Syvitski, James P. M.; Seeber, Leonardo; Akhter, S. Humayun

    2014-08-01

    Many of the world's largest river deltas are sinking due to sediment loading, compaction, and tectonics but also recently because of groundwater extraction, hydrocarbon extraction, and reduced aggradation. Little is known, however, about the full spatial variability of subsidence rates in complex delta systems. This study reconstructs subsidence rates in the eastern portion of the Ganges-Brahmaputra Delta (GBD), Bangladesh, covering more than 10,000 km2 at a high spatial resolution of 100 m. The map was produced using Interferometric Synthetic Aperture Radar (InSAR) covering the period 2007 to 2011. Eighteen Advanced Land Observing Satellite Phased-Array L-band SAR scenes were used to generate 30 interferograms calibrated with GPS. Interferograms were stacked to yield average subsidence rates over the study period. Small Baseline Subset-InSAR was then applied to validate the results against an additional GPS record from Dhaka, Bangladesh. Land subsidence of 0 to > 10 mm/yr is seen in Dhaka, with variability likely related to local variations in shallow subsurface sediment properties. Outside of the city, rates vary from 0 to > 18 mm/yr, with the lowest rates appearing primarily in Pleistocene Madhupur Clay and the highest rates in Holocene organic-rich muds. Results demonstrate that subsidence in this delta is primarily controlled by local stratigraphy, with rates varying by more than an order of magnitude depending on lithology. The ability of L-band InSAR to differentiate between stratigraphic units in this humid, vegetated subtropical river delta demonstrates the power of interferometry as a tool for studying the subsurface in deltaic environments.

  19. IDEAL CURRENT PATTERNS YIELDING OPTIMAL SNR AND SAR IN MAGNETIC RESONANCE IMAGING: COMPUTATIONAL METHODS AND PHYSICAL INSIGHTS

    PubMed Central

    Lattanzi, Riccardo; Sodickson, Daniel K.

    2011-01-01

    At high and ultra-high magnetic field strengths, understanding interactions between tissues and the electromagnetic fields generated by radiofrequency (RF) coils becomes crucial for safe and effective coil design, as well as for insight into limits of performance. In this work we present a rigorous electrodynamic modeling framework, using dyadic Green’s functions, to derive the electromagnetic field in homogeneous spherical and cylindrical samples resulting from arbitrary surface currents in the presence or absence of a surrounding RF shield. We show how to calculate ideal current patterns which result in the highest possible signal to noise ratio (“ultimate intrinsic signal to noise ratio (SNR)”) or the lowest possible RF power deposition (“ultimate intrinsic specific absorption rate (SAR)”) compatible with electrodynamic principles. We identify familiar coil designs within optimal current patterns at low to moderate field strength, thereby establishing and explaining graphically the near-optimality of traditional surface and volume quadrature designs. We also document the emergence of less familiar patterns, e.g. involving substantial electric as well as magnetic dipole contributions, at high field strength. Performance comparisons with particular coil array configurations demonstrate that optimal performance may be approached with finite arrays if ideal current patterns are used as a guide for coil design. PMID:22127735

  20. Single-Chip FPGA Azimuth Pre-Filter for SAR

    NASA Technical Reports Server (NTRS)

    Gudim, Mimi; Cheng, Tsan-Huei; Madsen, Soren; Johnson, Robert; Le, Charles T-C; Moghaddam, Mahta; Marina, Miguel

    2005-01-01

    A field-programmable gate array (FPGA) on a single lightweight, low-power integrated-circuit chip has been developed to implement an azimuth pre-filter (AzPF) for a synthetic-aperture radar (SAR) system. The AzPF is needed to enable more efficient use of data-transmission and data-processing resources: In broad terms, the AzPF reduces the volume of SAR data by effectively reducing the azimuth resolution, without loss of range resolution, during times when end users are willing to accept lower azimuth resolution as the price of rapid access to SAR imagery. The data-reduction factor is selectable at a decimation factor, M, of 2, 4, 8, 16, or 32 so that users can trade resolution against processing and transmission delays. In principle, azimuth filtering could be performed in the frequency domain by use of fast-Fourier-transform processors. However, in the AzPF, azimuth filtering is performed in the time domain by use of finite-impulse-response filters. The reason for choosing the time-domain approach over the frequency-domain approach is that the time-domain approach demands less memory and a lower memory-access rate. The AzPF operates on the raw digitized SAR data. The AzPF includes a digital in-phase/quadrature (I/Q) demodulator. In general, an I/Q demodulator effects a complex down-conversion of its input signal followed by low-pass filtering, which eliminates undesired sidebands. In the AzPF case, the I/Q demodulator takes offset video range echo data to the complex baseband domain, ensuring preservation of signal phase through the azimuth pre-filtering process. In general, in an SAR I/Q demodulator, the intermediate frequency (fI) is chosen to be a quarter of the range-sampling frequency and the pulse-repetition frequency (fPR) is chosen to be a multiple of fI. The AzPF also includes a polyphase spatial-domain pre-filter comprising four weighted integrate-and-dump filters with programmable decimation factors and overlapping phases. To prevent aliasing of signals

  1. Modeling the intracellular pathogen-immune interaction with cure rate

    NASA Astrophysics Data System (ADS)

    Dubey, Balram; Dubey, Preeti; Dubey, Uma S.

    2016-09-01

    Many common and emergent infectious diseases like Influenza, SARS, Hepatitis, Ebola etc. are caused by viral pathogens. These infections can be controlled or prevented by understanding the dynamics of pathogen-immune interaction in vivo. In this paper, interaction of pathogens with uninfected and infected cells in presence or absence of immune response are considered in four different cases. In the first case, the model considers the saturated nonlinear infection rate and linear cure rate without absorption of pathogens into uninfected cells and without immune response. The next model considers the effect of absorption of pathogens into uninfected cells while all other terms are same as in the first case. The third model incorporates innate immune response, humoral immune response and Cytotoxic T lymphocytes (CTL) mediated immune response with cure rate and without absorption of pathogens into uninfected cells. The last model is an extension of the third model in which the effect of absorption of pathogens into uninfected cells has been considered. Positivity and boundedness of solutions are established to ensure the well-posedness of the problem. It has been found that all the four models have two equilibria, namely, pathogen-free equilibrium point and pathogen-present equilibrium point. In each case, stability analysis of each equilibrium point is investigated. Pathogen-free equilibrium is globally asymptotically stable when basic reproduction number is less or equal to unity. This implies that control or prevention of infection is independent of initial concentration of uninfected cells, infected cells, pathogens and immune responses in the body. The proposed models show that introduction of immune response and cure rate strongly affects the stability behavior of the system. Further, on computing basic reproduction number, it has been found to be minimum for the fourth model vis-a-vis other models. The analytical findings of each model have been exemplified by

  2. Simulation of SAR backscatter for forest vegetation

    NASA Astrophysics Data System (ADS)

    Prajapati, Richa; Kumar, Shashi; Agrawal, Shefali

    2016-05-01

    Synthetic Aperture Radar (SAR) is one of the most recent imaging technology to study the forest parameters. The invincible characteristics of microwave acquisition in cloudy regions and night imaging makes it a powerful tool to study dense forest regions. A coherent combination of radar polarimetry and interferometry (PolInSAR) enhances the accuracy of retrieved biophysical parameters. This paper attempts to address the issue of estimation of forest structural information caused due to instability of radar platforms through simulation of SAR image. The Terai Central Forest region situated at Haldwani area in Uttarakhand state of India was chosen as the study area. The system characteristics of PolInSAR dataset of Radarsat-2 SAR sensor was used for simulation process. Geometric and system specifications like platform altitude, center frequency, mean incidence angle, azimuth and range resolution were taken from metadata. From the field data it was observed that average tree height and forest stand density were 25 m and 300 stems/ha respectively. The obtained simulated results were compared with the sensor acquired master and slave intensity images. It was analyzed that for co-polarized horizontal component (HH), the mean values of simulated and real master image had a difference of 0.3645 with standard deviation of 0.63. Cross-polarized (HV) channel showed better results with mean difference of 0.06 and standard deviation of 0.1 while co-polarized vertical component (VV) did not show similar values. In case of HV polarization, mean variation between simulated and real slave images was found to be the least. Since cross-polarized channel is more sensitive to vegetation feature therefore better simulated results were obtained for this channel. Further the simulated images were processed using PolInSAR inversion modelling approach using three different techniques DEM differencing, Coherence Amplitude Inversion and Random Volume over Ground Inversion. DEM differencing

  3. Influenza and SARS: the impact of viral pandemics on maritime health.

    PubMed

    Lim, Poh Lian

    2011-01-01

    Global travel and transport play a critical role in the spread of infections. We see this clearly in the first two pandemics of the 21st century: SARS and influenza H1N1-2009. Although air travel contributed to dissemination in these two pandemics, the travel restrictions, quarantines, and heightened vigilance which resulted had an impact on maritime health. Seasonal, pandemic, and avian influenza have some important differences with regards to exposure risks, infectivity, and severity. Most of the data for maritime influenza outbreaks focus on seasonal influenza on cruise ships, but influenza among crew members occurs due to close working conditions and is potentially preventable with staff vaccination programs. To date, avian influenza has low human-to-human transmission; infection typically requires close contact with poultry, but presents with severe disease and a high fatality rate. Pandemic (swine) influenza was readily transmitted between people, including young adults, and caused severe illness in high-risk groups including pregnant women, children, and those with co-morbidities and obesity. In contrast, SARS had lower infectivity compared to influenza, and a longer incubation period. These characteristics slowed its propagation enough that outbreak control measures, such as isolation of infected cases and quarantine of exposed but well persons, were effective in terminating this pandemic. No effective vaccine exists for SARS at this time, whereas countries were able to deploy millions of doses of pandemic influenza vaccine within 7 months after the outbreak was first recognized in Mexico. The lack of a protective vaccine and the higher case fatality rate in SARS will mean that stringent quarantine measures may still be required for outbreak control if SARS ever occurs again. Compliance with international health regulations, and the ability to adapt these to maritime health needs, will be important in the shipping industry.

  4. Dynamic Deformation of ETNA Volcano Observed by GPS and SAR Interferometry

    NASA Technical Reports Server (NTRS)

    Lundgren, P.; Rosen, P.; Webb, F.; Tesauro, M.; Lanari, R.; Sansosi, E.; Puglisi, G.; Bonforte, A.; Coltelli, M.

    1999-01-01

    Synthetic aperture radar (SAR) interferometry and GPS have shown that during the quiescent period from 1993-1995 Mt. Etna volcano, Italy, inflated. Since the initiation of eruptive activity since late 1995 the deformation has been more contentious. We will explore the detailed deformation during the period from 1995-1996 spanning the late stages of inflation and the beginning of eruptive activity. We use SAR interferometry and GPS data to measure the volcano deformation. We invert the observed deformation for both simple point source. le crack elastic sources or if warranted for a spheroidal pressure So In particular, we will examine the evolution of the inflation and the transition to a lesser deflation observed at the end of 1995. We use ERS-1/2 SAR data from both ascending and descending passes to allow for dense temporal 'sampling of the deformation and to allow us to critically assess atmospheric noise. Preliminary results from interferometry suggest that the inflation rate accelerated prior to resumption of activity in 1995, while GPS data suggest a more steady inflation with some fluctuation following the start of activity. This study will compare and contrast the interferometric SAR and GPS results and will address the strengths and weaknesses of each technique towards volcano deformation studies.

  5. The dual-use potential of the TerraSAR-X mission

    NASA Astrophysics Data System (ADS)

    Suess, Helmut; Buckreuss, Stefan

    2009-05-01

    TerraSAR-X, Germany's first national remote sensing satellite, is implemented in a public-private partnership between the German Aerospace Centre (DLR) and EADS Astrium, Infoterra GmbH. This radar satellite, launched at June 15th 2007 supplies high-quality radar data for purposes of scientific observation of the Earth for a period of at least five years. The first part of the paper describes the key features of the TerraSAR-X mission, the high-resolution X-Band Synthetic Aperture Radar which allows the operation in Spotlight, Stripmap and ScanSAR mode with various polarizations. The second part of this paper deals with the interpretation of TerraSAR-X images under dual-use aspects, especially for security and reconnaissance purposes. Examples for relevant and characteristic target categories are listed and attributes for a precise description are defined. As a measure for resolution and interpretation the public NIIRS-table (National Image Interpretation Rating Scale) is used. As an application example the characteristic scenario of a military airport including railway and route connections are extracted. Finally the applicability of the NIIRS-table is discussed in this particular case.

  6. Fifteen years of surface deformation in Western Taiwan: Insight from SAR interferometry

    NASA Astrophysics Data System (ADS)

    Huang, Mong-Han; Bürgmann, Roland; Hu, Jyr-Ching

    2016-12-01

    Geodetically measured surface displacements are produced by a combination of underlying deformation processes acting at different spatial and temporal scales. A complete history of surface measurements in an area can help discriminate contributions from tectonic, hydrologic, and anthropogenic processes. In this study, we use Synthetic Aperture Radar (SAR) images of the active mountain front and adjacent coastal plain of southwestern Taiwan to generate time series of surface deformation from 1995 to 2001 and from 2005 to 2008 based on the InSAR small baseline method. The InSAR measurements agree well with LOS motions estimated from continuous GPS measurements of 3D displacements between 2006 and 2008. A significant range increase in line of sight (LOS) is dominated by land subsidence in the coastal area of western and southwestern Taiwan. Subsidence rates vary with annual periods and are highly correlated with seasonal precipitation, which are likely associated with groundwater recharge and withdrawal. The long-term deformation is dominated by long-term tectonic loading in SW Taiwan during the interseismic period of the earthquake cycle, including elastic strain along or continuous creep on the active faults. Our results show the ability of InSAR to reveal spatiotemporal crustal deformation in western Taiwan with high spatial resolution and accuracy, which is potentially important for evaluating seismic hazards.

  7. Compressed Sensing for Millimeter-wave Ground Based SAR/ISAR Imaging

    NASA Astrophysics Data System (ADS)

    Yiğit, Enes

    2014-11-01

    Millimeter-wave (MMW) ground based (GB) synthetic aperture radar (SAR) and inverse SAR (ISAR) imaging are the powerful tools for the detection of foreign object debris (FOD) and concealed objects that requires wide bandwidths and highly frequent samplings in both slow-time and fast-time domains according to Shannon/Nyquist sampling theorem. However, thanks to the compressive sensing (CS) theory GB-SAR/ISAR data can be reconstructed by much fewer random samples than the Nyquist rate. In this paper, the impact of both random frequency sampling and random spatial domain data collection of a SAR/ISAR sensor on reconstruction quality of a scene of interest was studied. To investigate the feasibility of using proposed CS framework, different experiments for various FOD-like and concealed object-like targets were carried out at the Ka and W band frequencies of the MMW. The robustness and effectiveness of the recommend CS-based reconstruction configurations were verified through a comparison among each other by using integrated side lobe ratios (ISLR) of the images.

  8. Hydroxyl radical reaction rate coefficients as a function of temperature and IR absorption cross sections for CF3CH=CH2 (HFO-1243zf), potential replacement of CF3CH2F (HFC-134a).

    PubMed

    González, Sergio; Jiménez, Elena; Ballesteros, Bernabé; Martínez, Ernesto; Albaladejo, José

    2015-04-01

    CF3CH=CH2 (hydrofluoroolefin, HFO-1243zf) is a potential replacement of high global-warming potential (GWP) hydrofluorocarbon (HFC-134a, CF3CFH2). Both the atmospheric lifetime and the radiative efficiency of HFO-1243zf are parameters needed for estimating the GWP of this species. Therefore, the aim of this work is (i) to estimate the atmospheric lifetime of HFO-1243zf from the reported OH rate coefficients, k OH, determined under tropospheric conditions and (ii) to calculate its radiative efficiency from the reported IR absorption cross sections. The OH rate coefficient at 298 K also allows the estimation of the photochemical ozone creation potential (ε(POCP)). The pulsed laser photolysis coupled to a laser-induced fluorescence technique was used to determine k OH for the reaction of OH radicals with HFO-1243zf as a function of pressure (50-650 Torr of He) and temperature (263-358 K). Gas-phase IR spectra of HFO-1243zf were recorded at room temperature using a Fourier transform IR spectrometer between 500 and 4,000 cm(-1). At all temperatures, k OH did not depend on bath gas concentration (i.e., on the total pressure between 50 and 650 Torr of He). A slight but noticeable T dependence of k OH was observed in the temperature range investigated. The observed behavior is well described by the following Arrhenius expression: k OH(T) = (7.65 ± 0.26) × 10(-13) exp [(165 ± 10) / T] cm(3) molecule(-1) s(-1). Negligible IR absorption of HFO-1243zf was observed at wavenumbers greater than 1,700 cm(-1). Therefore, IR absorption cross sections, [Formula: see text], were determined in the 500-1,700 cm(-1) range. Integrated [Formula: see text] were determined between 650 and 1,800 cm(-1) for comparison purposes. The main diurnal removal pathway for HFO-1243zf is the reaction with OH radicals, which accounts for 64% of the overall loss by homogeneous reactions at 298 K. Globally, the lifetime due to OH reaction (τ OH) was estimated to be 8.7 days under

  9. Animal models for SARS and MERS coronaviruses

    PubMed Central

    Gretebeck, Lisa M; Subbarao, Kanta

    2015-01-01

    The emergence of Severe Acute Respiratory Syndrome coronavirus (SARS-CoV) and Middle East Respiratory Syndrome coronavirus (MERS-CoV), two strains of animal coronaviruses that crossed the species barrier to infect and cause severe respiratory infections in humans within the last 12 years, have taught us that coronaviruses represent a global threat that does not recognize international borders. We can expect to see other novel coronaviruses emerge in the future. An ideal animal model should reflect the clinical signs, viral replication and pathology seen in humans. In this review, we present factors to consider in establishing an animal model for the study of novel coronaviruses and compare the different animal models that have been employed to study SARS-CoV and MERS-CoV. PMID:26184451

  10. International collaboration in SAR ground data systems

    NASA Technical Reports Server (NTRS)

    Curlander, John C.

    1993-01-01

    A set of considerations that are pertinent to future international cooperation in the area of synthetic aperture radar (SAR) ground data systems are presented. The considerations are as follows: (1) success of future spaceborne SAR missions will require multi-agency and/or multi-national collaboration; (2) ground processing is typically performed by each agency for their user base; (3) international standards are required to achieve a uniform data product independent of the processing center; (4) to reduce the aggregate cost of the ground data systems, collaboration is required in design and development; (5) effective utilization of the data by an international user community; (6) commercialization of data products; and (7) security of data systems.

  11. Animal models for SARS and MERS coronaviruses.

    PubMed

    Gretebeck, Lisa M; Subbarao, Kanta

    2015-08-01

    The emergence of Severe Acute Respiratory Syndrome coronavirus (SARS-CoV) and Middle East Respiratory Syndrome coronavirus (MERS-CoV), two strains of animal coronaviruses that crossed the species barrier to infect and cause severe respiratory infections in humans within the last 12 years, have taught us that coronaviruses represent a global threat that does not recognize international borders. We can expect to see other novel coronaviruses emerge in the future. An ideal animal model should reflect the clinical signs, viral replication and pathology seen in humans. In this review, we present factors to consider in establishing an animal model for the study of novel coronaviruses and compare the different animal models that have been employed to study SARS-CoV and MERS-CoV.

  12. SAR impulse response with residual chirps.

    SciTech Connect

    Doerry, Armin Walter

    2009-06-01

    A Linear Frequency-Modulated (LFM) chirp is a function with unit amplitude and quadratic phase characteristic. In a focused Synthetic Aperture Radar (SAR) image, a residual chirp is undesired for targets of interest, as it coarsens the manifested resolution. However, for undesired spurious signals, a residual chirp is often advantageous because it spreads the energy and thereby diminishes its peak value. In either case, a good understanding of the effects of a residual LFM chirp on a SAR Impulse Response (IPR) is required to facilitate system analysis and design. This report presents an analysis of the effects of a residual chirp on the IPR. As reference, there is a rich body of publications on various aspects of LFM chirps. A quick search reveals a plethora of articles, going back to the early 1950s. We mention here purely as trivia one of the earlier analysis papers on this waveform by Klauder, et al.

  13. Relic Neutrino Absorption Spectroscopy

    SciTech Connect

    Eberle, b

    2004-01-28

    Resonant annihilation of extremely high-energy cosmic neutrinos on big-bang relic anti-neutrinos (and vice versa) into Z-bosons leads to sizable absorption dips in the neutrino flux to be observed at Earth. The high-energy edges of these dips are fixed, via the resonance energies, by the neutrino masses alone. Their depths are determined by the cosmic neutrino background density, by the cosmological parameters determining the expansion rate of the universe, and by the large redshift history of the cosmic neutrino sources. We investigate the possibility of determining the existence of the cosmic neutrino background within the next decade from a measurement of these absorption dips in the neutrino flux. As a by-product, we study the prospects to infer the absolute neutrino mass scale. We find that, with the presently planned neutrino detectors (ANITA, Auger, EUSO, OWL, RICE, and SalSA) operating in the relevant energy regime above 10{sup 21} eV, relic neutrino absorption spectroscopy becomes a realistic possibility. It requires, however, the existence of extremely powerful neutrino sources, which should be opaque to nucleons and high-energy photons to evade present constraints. Furthermore, the neutrino mass spectrum must be quasi-degenerate to optimize the dip, which implies m{sub {nu}} 0.1 eV for the lightest neutrino. With a second generation of neutrino detectors, these demanding requirements can be relaxed considerably.

  14. Impact of pinna compression on the RF absorption in the heads of adult and juvenile cell phone users.

    PubMed

    Christ, Andreas; Gosselin, Marie-Christine; Kühn, Sven; Kuster, Niels

    2010-07-01

    The electromagnetic exposure of cell phone users depends on several parameters. One of the most dominant of these is the distance between the cell phone and the head tissue. The pinna can be regarded as a spacer between the top of the phone and the head tissue. The size of this spacer has not yet been systematically studied. The objective of this article is to investigate the variations of distance as a function of age of the exposed person, and the mechanical force on the pinna and how it affects the peak spatial specific absorption rat