Science.gov

Sample records for abstract study design

  1. Designing for Mathematical Abstraction

    ERIC Educational Resources Information Center

    Pratt, Dave; Noss, Richard

    2010-01-01

    Our focus is on the design of systems (pedagogical, technical, social) that encourage mathematical abstraction, a process we refer to as "designing for abstraction." In this paper, we draw on detailed design experiments from our research on children's understanding about chance and distribution to re-present this work as a case study in designing…

  2. Abstract Line Designs

    ERIC Educational Resources Information Center

    Nevinskas, Nancy

    2011-01-01

    In this article, the author describes a unit on the exploration of line. The unit was composed of two individual line lessons. In the first lesson, students were introduced to line as an element of design. They were asked to describe different types of lines, and look for them in art reproductions. The second lesson in the unit involved painting…

  3. Abstractions for DNA circuit design

    PubMed Central

    Lakin, Matthew R.; Youssef, Simon; Cardelli, Luca; Phillips, Andrew

    2012-01-01

    DNA strand displacement techniques have been used to implement a broad range of information processing devices, from logic gates, to chemical reaction networks, to architectures for universal computation. Strand displacement techniques enable computational devices to be implemented in DNA without the need for additional components, allowing computation to be programmed solely in terms of nucleotide sequences. A major challenge in the design of strand displacement devices has been to enable rapid analysis of high-level designs while also supporting detailed simulations that include known forms of interference. Another challenge has been to design devices capable of sustaining precise reaction kinetics over long periods, without relying on complex experimental equipment to continually replenish depleted species over time. In this paper, we present a programming language for designing DNA strand displacement devices, which supports progressively increasing levels of molecular detail. The language allows device designs to be programmed using a common syntax and then analysed at varying levels of detail, with or without interference, without needing to modify the program. This allows a trade-off to be made between the level of molecular detail and the computational cost of analysis. We use the language to design a buffered architecture for DNA devices, capable of maintaining precise reaction kinetics for a potentially unbounded period. We test the effectiveness of buffered gates to support long-running computation by designing a DNA strand displacement system capable of sustained oscillations. PMID:21775321

  4. Simulation, Design Abstraction, and SystemC

    ERIC Educational Resources Information Center

    Harcourt, Ed

    2007-01-01

    SystemC is a system-level design and simulation language based on C++. We've been using SystemC for computer organization and design projects for the past several years. Because SystemC is embedded in C++ it contains the powerful abstraction mechanisms of C++ not found in traditional hardware description languages, such as support for…

  5. Manpower Management Studies: Selected Abstracts.

    ERIC Educational Resources Information Center

    Ryerson, William R., Comp.

    This bibliography contains 58 selected abstracts of research reports dating back to 1964 on the general subject of manpower management. It was prepared from a search of the National Technical Information Service data base of more than 300,000 documents submitted by agencies of the Federal Government and also by private organizations or individuals…

  6. Youth Studies Abstracts. Vol. 4 No. 3.

    ERIC Educational Resources Information Center

    Youth Studies Abstracts, 1985

    1985-01-01

    This volume contains 169 abstracts of documents dealing with youth and educational programs for youth. Included in the volume are 97 abstracts of documents dealing with social and educational developments; 56 abstracts of program reports, reviews, and evaluations; and 16 abstracts of program materials. Abstracts are grouped according to the…

  7. Abstracts

    NASA Astrophysics Data System (ADS)

    2012-09-01

    Measuring cosmological parameters with GRBs: status and perspectives New interpretation of the Amati relation The SED Machine - a dedicated transient spectrograph PTF10iue - evidence for an internal engine in a unique Type Ic SN Direct evidence for the collapsar model of long gamma-ray bursts On pair instability supernovae and gamma-ray bursts Pan-STARRS1 observations of ultraluminous SNe The influence of rotation on the critical neutrino luminosity in core-collapse supernovae General relativistic magnetospheres of slowly rotating and oscillating neutron stars Host galaxies of short GRBs GRB 100418A: a bridge between GRB-associated hypernovae and SNe Two super-luminous SNe at z ~ 1.5 from the SNLS Prospects for very-high-energy gamma-ray bursts with the Cherenkov Telescope Array The dynamics and radiation of relativistic flows from massive stars The search for light echoes from the supernova explosion of 1181 AD The proto-magnetar model for gamma-ray bursts Stellar black holes at the dawn of the universe MAXI J0158-744: the discovery of a supersoft X-ray transient Wide-band spectra of magnetar burst emission Dust formation and evolution in envelope-stripped core-collapse supernovae The host galaxies of dark gamma-ray bursts Keck observations of 150 GRB host galaxies Search for properties of GRBs at large redshift The early emission from SNe Spectral properties of SN shock breakout MAXI observation of GRBs and short X-ray transients A three-dimensional view of SN 1987A using light echo spectroscopy X-ray study of the southern extension of the SNR Puppis A All-sky survey of short X-ray transients by MAXI GSC Development of the CALET gamma-ray burst monitor (CGBM)

  8. Youth Studies Abstracts. Vol. 4 No. 1.

    ERIC Educational Resources Information Center

    Youth Studies Abstracts, 1985

    1985-01-01

    This volume contains abstracts of 76 projects (most of which were conducted in Australia and New Zealand) concerned with programs for youth and with social and educational developments affecting youth. The abstracts are arranged in the following two categories: (1) Social and Educational Developments: Policy, Analysis, Research; and (2) Programs:…

  9. Abstracting Attribute Space for Transfer Function Exploration and Design.

    PubMed

    Maciejewski, Ross; Jang, Yun; Woo, Insoo; Jänicke, Heike; Gaither, Kelly P; Ebert, David S

    2013-01-01

    Currently, user centered transfer function design begins with the user interacting with a one or two-dimensional histogram of the volumetric attribute space. The attribute space is visualized as a function of the number of voxels, allowing the user to explore the data in terms of the attribute size/magnitude. However, such visualizations provide the user with no information on the relationship between various attribute spaces (e.g., density, temperature, pressure, x, y, z) within the multivariate data. In this work, we propose a modification to the attribute space visualization in which the user is no longer presented with the magnitude of the attribute; instead, the user is presented with an information metric detailing the relationship between attributes of the multivariate volumetric data. In this way, the user can guide their exploration based on the relationship between the attribute magnitude and user selected attribute information as opposed to being constrained by only visualizing the magnitude of the attribute. We refer to this modification to the traditional histogram widget as an abstract attribute space representation. Our system utilizes common one and two-dimensional histogram widgets where the bins of the abstract attribute space now correspond to an attribute relationship in terms of the mean, standard deviation, entropy, or skewness. In this manner, we exploit the relationships and correlations present in the underlying data with respect to the dimension(s) under examination. These relationships are often times key to insight and allow us to guide attribute discovery as opposed to automatic extraction schemes which try to calculate and extract distinct attributes a priori. In this way, our system aids in the knowledge discovery of the interaction of properties within volumetric data. PMID:22508900

  10. A Genre Analysis Study of 80 Medical Abstracts.

    ERIC Educational Resources Information Center

    Anderson, Kenneth; Maclean, Joan

    1997-01-01

    A study investigated the usefulness of instructional materials on the writing of scientific articles by comparing the descriptions of abstracts offered in the textbook with a sample of abstracts drawn from four fields of medicine (clinical medicine, surgery, epidemiology, basic sciences). The comparison was confined to abstracts of results-focused…

  11. Honors Dissertation Abstracts: A Bounded Qualitative Meta-Study

    ERIC Educational Resources Information Center

    Holman, Debra K.; Banning, James H.

    2012-01-01

    A potential source of useful information about undergraduate honors education can be found in doctoral dissertation abstracts that focus on honors. Debra Holman and James Banning of Colorado State University sought to explore this resource by undertaking a bounded qualitative meta-study of such abstracts using document analysis. Three…

  12. Z-2 Threaded Insert Design and Testing Abstract

    NASA Technical Reports Server (NTRS)

    Rhodes, RIchard; Graziosi, Dave; Jones, Bobby; Ferl, Jinny; Scarborough, Steve; Sweeney, Mitch

    2016-01-01

    The Z-2 Prototype Planetary Extravehicular Space Suit Assembly is a continuation of NASA's Z series of spacesuits. The Z-2 is another step in the NASA's technology development roadmap leading to human exploration of the Martian surface. To meet a more challenging set of requirements than previous suit systems standard design features, such as threaded inserts, have been re-analyzed and improved. NASA's Z-2 prototype space suit contains several components fabricated from an advanced hybrid composite laminate consisting of IM10 carbon fiber and fiber glass. One requirement NASA levied on the suit composites was the ability to have removable, replaceable helicoil inserts to which other suit components would be fastened. An approach utilizing bonded in inserts with helicoils inside of them was implemented. The design of the interface flanges of the composites allowed some of the inserts to be a "T" style insert that was installed through the entire thickness of the laminate. The flange portion of the insert provides a mechanical lock as a redundancy to the adhesive aiding in the pullout load that the insert can withstand. In some locations it was not possible to utilize at "T" style insert and a blind insert was used instead. These inserts rely completely on the bond strength of the adhesive to resist pullout. It was determined during the design of the suit that the inserts did not need to withstand loads induced from pressure cycling but instead tension induced from torqueing the screws to bolt on hardware which creates a much higher stress on them. Bolt tension is determined by dividing the torque on the screw by a k value multiplied by the thread diameter of the bolt. The k value is a factor that accounts for friction in the system. A common value used for k for a non-lubricated screw is 0.2. The k value can go down by as much as 0.1 if the screw is lubricated which means for the same torque, a much larger tension could be placed on the bolt and insert. This paper

  13. (abstract) Scaling Nominal Solar Cell Impedances for Array Design

    NASA Technical Reports Server (NTRS)

    Mueller, Robert L; Wallace, Matthew T.; Iles, Peter

    1994-01-01

    This paper discusses a task the objective of which is to characterize solar cell array AC impedance and develop scaling rules for impedance characterization of large arrays by testing single solar cells and small arrays. This effort is aimed at formulating a methodology for estimating the AC impedance of the Mars Pathfinder (MPF) cruise and lander solar arrays based upon testing single cells and small solar cell arrays and to create a basis for design of a single shunt limiter for MPF power control of flight solar arrays having very different inpedances.

  14. Some design constraints required for the assembly of software components: The incorporation of atomic abstract types into generically structured abstract types

    NASA Technical Reports Server (NTRS)

    Johnson, Charles S.

    1986-01-01

    It is nearly axiomatic, that to take the greatest advantage of the useful features available in a development system, and to avoid the negative interactions of those features, requires the exercise of a design methodology which constrains their use. A major design support feature of the Ada language is abstraction: for data, functions processes, resources, and system elements in general. Atomic abstract types can be created in packages defining those private types and all of the overloaded operators, functions, and hidden data required for their use in an application. Generically structured abstract types can be created in generic packages defining those structured private types, as buildups from the user-defined data types which are input as parameters. A study is made of the design constraints required for software incorporating either atomic or generically structured abstract types, if the integration of software components based on them is to be subsequently performed. The impact of these techniques on the reusability of software and the creation of project-specific software support environments is also discussed.

  15. Non-Determinism: An Abstract Concept in Computer Science Studies

    ERIC Educational Resources Information Center

    Armoni, Michal; Gal-Ezer, Judith

    2007-01-01

    Non-determinism is one of the most important, yet abstract, recurring concepts of Computer Science. It plays an important role in Computer Science areas such as formal language theory, computability theory, distributed computing, and operating systems. We conducted a series of studies on the perception of non-determinism. In the current research,…

  16. ClinicalTrials.gov registration can supplement information in abstracts for systematic reviews: a comparison study

    PubMed Central

    2013-01-01

    Background The inclusion of randomized controlled trials (RCTs) reported in conference abstracts in systematic reviews is controversial, partly because study design information and risk of bias is often not fully reported in the abstract. The Association for Research in Vision and Ophthalmology (ARVO) requires trial registration of abstracts submitted for their annual conference as of 2007. Our goal was to assess the feasibility of obtaining study design information critical to systematic reviews, but not typically included in conference abstracts, from the trial registration record. Methods We reviewed all conference abstracts presented at the ARVO meetings from 2007 through 2009, and identified 496 RCTs; 154 had a single matching registration record in ClinicalTrials.gov. Two individuals independently extracted information from the abstract and the ClinicalTrials.gov record, including study design, sample size, inclusion criteria, masking, interventions, outcomes, funder, and investigator name and contact information. Discrepancies were resolved by consensus. We assessed the frequencies of reporting variables appearing in the abstract and the trial register and assessed agreement of information reported in both sources. Results We found a substantial amount of study design information in the ClinicalTrials.gov record that was unavailable in the corresponding conference abstract, including eligibility criteria associated with gender (83%; 128/154); masking or blinding of study participants (53%, 82/154), persons administering treatment (30%, 46/154), and persons measuring the outcomes (40%, 61/154)); and number of study centers (58%; 90/154). Only 34% (52/154) of abstracts explicitly described a primary outcome, but a primary outcome was included in the “Primary Outcome” field in the ClinicalTrials.gov record for 82% (126/154) of studies. One or more study interventions were reported in each abstract, but agreed exactly with those reported in Clinical

  17. The Advantages of Abstract Control Knowledge in Expert System Design. Technical Report #7.

    ERIC Educational Resources Information Center

    Clancey, William J.

    This paper argues that an important design principle for building expert systems is to represent all control knowledge abstractly and separately from the domain knowledge upon which it operates. Abstract control knowledge is defined as the specifications of when and how a program is to carry out its operations, such as pursuing a goal, focusing,…

  18. Abstract art and cortical motor activation: an EEG study

    PubMed Central

    Umilta', M. Alessandra; Berchio, Cristina; Sestito, Mariateresa; Freedberg, David; Gallese, Vittorio

    2012-01-01

    The role of the motor system in the perception of visual art remains to be better understood. Earlier studies on the visual perception of abstract art (from Gestalt theory, as in Arnheim, 1954 and 1988, to balance preference studies as in Locher and Stappers, 2002, and more recent work by Locher et al., 2007; Redies, 2007, and Taylor et al., 2011), neglected the question, while the field of neuroesthetics (Ramachandran and Hirstein, 1999; Zeki, 1999) mostly concentrated on figurative works. Much recent work has demonstrated the multimodality of vision, encompassing the activation of motor, somatosensory, and viscero-motor brain regions. The present study investigated whether the observation of high-resolution digitized static images of abstract paintings by Lucio Fontana is associated with specific cortical motor activation in the beholder's brain. Mu rhythm suppression was evoked by the observation of original art works but not by control stimuli (as in the case of graphically modified versions of these works). Most interestingly, previous visual exposure to the stimuli did not affect the mu rhythm suppression induced by their observation. The present results clearly show the involvement of the cortical motor system in the viewing of static abstract art works. PMID:23162456

  19. A study of optimal abstract jamming strategies vs. noncoherent MFSK

    NASA Technical Reports Server (NTRS)

    Mceliece, R. J.; Rodemich, E. R.

    1983-01-01

    The present investigation is concerned with the performance of uncoded MFSK modulation in the presence of arbitrary additive jamming, taking into account the objective to devise robust antijamming strategies. An abstract model is considered, giving attention to the signal strength as a nonnegative real number X, the employment of X as a random variable, its distribution function G(x), the transmitter's strategy G, the jamming noise as an M-dimensional random vector Z, and the error probability. A summary of previous work on the considered problem is provided, and the results of the current study are presented.

  20. Comparing Natural and Abstract Categories: A Case Study from Computer Science.

    ERIC Educational Resources Information Center

    Adelson, Beth

    1985-01-01

    Designed to determine whether abstract and concrete concepts are classified similarly, this study used three separate experiments to explore the vertical and horizontal dimensions used by computer scientists to categorize the common concepts of their field. It found that concrete concept categorization operates over a wider range than previously…

  1. Hanford Personnel Dosimeter supporting studies FY-1980. [Lead abstract

    SciTech Connect

    Endres, G.W.R.; Cummings, F.M.; Aldrich, J.M.; Thorson, M.R.; Kathren, R.L.

    1981-02-01

    Separate abstracts were prepared for the 10 sections of this report which describe fundamental characteristics of the Hanford multipurpose personnel dosimeter (HMPD). Abstracts were not prepared for Appendix A and Appendix B which deal with calculated standard deviations for 100 mrem mixed field exposures and detailed calculations of standard deviations, respectively. (KRM)

  2. Abstraction in Expertise: A Study of Nurses' Conceptions of Concentration.

    ERIC Educational Resources Information Center

    Noss, Richard; Hoyles, Celia; Pozzi, Stefano

    2002-01-01

    Uses situated abstraction to understand nurses' conceptions of intensive quantity of drug concentration. Explores nurses' conceptions to undertake a pointed examination of the degree of situatedness of nurses' knowledge and reasoning. Demonstrates that nurses' conceptions were abstracted within their practice when they coordinated mathematical…

  3. Fifth SIAM conference on geometric design 97: Final program and abstracts. Final technical report

    SciTech Connect

    1997-12-31

    The meeting was divided into the following sessions: (1) CAD/CAM; (2) Curve/Surface Design; (3) Geometric Algorithms; (4) Multiresolution Methods; (5) Robotics; (6) Solid Modeling; and (7) Visualization. This report contains the abstracts of papers presented at the meeting. Proceding the conference there was a short course entitled ``Wavelets for Geometric Modeling and Computer Graphics``.

  4. Field Initiated Studies Program: Abstracts of Funded Projects, 1993.

    ERIC Educational Resources Information Center

    Office of Educational Research and Improvement (ED), Washington, DC. Office of Research.

    Projects funded in 1993 as part of the Field-Initiated Studies program of the U.S. Department of Education are described, including information on research objective, project design, principal investigators, amount of award, and report availability. Program titles and locations of principal investigator are: "Promoting Equity in Teacher Education…

  5. An experimental analogue study into the role of abstract thinking in trauma-related rumination.

    PubMed

    Ehring, Thomas; Szeimies, Anna-Kristina; Schaffrick, Christina

    2009-04-01

    Trauma-related rumination has been shown to predict the maintenance of posttraumatic stress disorder (PTSD). However, it is still unclear how rumination can be distinguished from functional forms of thinking about traumatic events. The current study used an analogue design to experimentally test the hypothesis that the abstractness of thinking is responsible for the dysfunctional effects of trauma-related rumination. Eighty-three healthy university students first watched a distressing video and were then randomly assigned to abstract ruminative thinking, concrete thinking or distraction. Abstract thinking was found to lead to a significantly longer maintenance of negative mood and arousal than both concrete thinking and distraction. These results are in line with earlier findings in the context of excessive worry and depressive rumination and support the view that abstractness is a critical factor for the dysfunctional effects of trauma-related rumination. However, results regarding intrusive memories were not supportive of the hypotheses. Unexpectedly, the distraction group showed the highest number of intrusions, whereas the abstract and concrete conditions did not significantly differ. Implications for theoretical models of trauma-related rumination and possible clinical implications are discussed. PMID:19200947

  6. International symposium on in vivo body composition studies: Program and abstracts

    SciTech Connect

    Not Available

    1986-01-01

    This booklet contains the program and individual abstracts for papers presented at the International symposium on in vivo body composition studies. The presentations were divided into five sessions. Individual abstracts were indexed for the Energy Data Base. (DT)

  7. An Analytic Study of the Postgraduate Students' Difficulties in Writing Abstracts in English

    ERIC Educational Resources Information Center

    Aly, Mahsoub Abdul-Sadeq

    2006-01-01

    The present study investigated the Egyptian postgraduate students' difficulties in writing abstracts in English. In order to achieve the objectives of this study, a list of criteria for writing a good and effective abstract has been developed in the light of the review of literature. Besides, a content analysis of 35 abstracts written in English…

  8. 1971 Annual Conference Abstracts

    ERIC Educational Resources Information Center

    Journal of Engineering Education, 1971

    1971-01-01

    Included are 112 abstracts listed under headings such as: acoustics, continuing engineering studies, educational research and methods, engineering design, libraries, liberal studies, and materials. Other areas include agricultural, electrical, mechanical, mineral, and ocean engineering. (TS)

  9. Neural Correlates of Abstract Rule Learning: An Event-Related Potential Study

    ERIC Educational Resources Information Center

    Sun, Fang; Hoshi-Shiba, Reiko; Abla, Dilshat; Okanoya, Kazuo

    2012-01-01

    Abstract rule learning is a fundamental aspect of human cognition, and is essential for language acquisition. However, despite its importance, the neural mechanisms underlying abstract rule learning are still largely unclear. In this study, we investigated the neural correlates of abstract rule learning by recording auditory event-related…

  10. Learner Perceptions on Instructional Design of Multimedia in Learning Abstract Concepts in Science at a Distance

    ERIC Educational Resources Information Center

    Kulasekara, Geetha Udayangani; Jayatilleke, Buddhini Gayathri; Coomaraswamy, Uma

    2011-01-01

    This study was carried out to explore learner perceptions on the instructional design features of interactive multimedia (IMM), which was especially designed to support the open and distance learners studying microbiology as a part of the BSc degree programme of the Open University of Sri Lanka (OUSL). The purpose of developing this IMM was to…

  11. CHARACTERIZING THE MICROBIAL COMMUNITY IN SABRE MICROCOSM STUDIES (ABSTRACT ONLY)

    EPA Science Inventory

    The SABRE (Source Area BioREmediation) project will evaluate accelerated anaerobic bioremediation of chlorinated solvents in areas of high concentration, such as DNAPL source areas. In preparation for a field scale pilot test, laboratory microcosm and column studies were conducte...

  12. METRICS OF PERFORMANCE FOR THE SABRE MICROCOSM STUDY (ABSTRACT ONLY)

    EPA Science Inventory

    The SABRE (Source Area BioREmediation) project will evaluate accelerated anaerobic bioremediation of chlorinated solvents in areas of high concentration, such as DNAPL source areas. In preparation for a field scale pilot test, a laboratory microcosm study was conducted to provide...

  13. Constraint-Based Abstract Semantics for Temporal Logic: A Direct Approach to Design and Implementation

    NASA Astrophysics Data System (ADS)

    Banda, Gourinath; Gallagher, John P.

    interpretation provides a practical approach to verifying properties of infinite-state systems. We apply the framework of abstract interpretation to derive an abstract semantic function for the modal μ-calculus, which is the basis for abstract model checking. The abstract semantic function is constructed directly from the standard concrete semantics together with a Galois connection between the concrete state-space and an abstract domain. There is no need for mixed or modal transition systems to abstract arbitrary temporal properties, as in previous work in the area of abstract model checking. Using the modal μ-calculus to implement CTL, the abstract semantics gives an over-approximation of the set of states in which an arbitrary CTL formula holds. Then we show that this leads directly to an effective implementation of an abstract model checking algorithm for CTL using abstract domains based on linear constraints. The implementation of the abstract semantic function makes use of an SMT solver. We describe an implemented system for proving properties of linear hybrid automata and give some experimental results.

  14. Abstract Constructions.

    ERIC Educational Resources Information Center

    Pietropola, Anne

    1998-01-01

    Describes a lesson designed to culminate a year of eighth-grade art classes in which students explore elements of design and space by creating 3-D abstract constructions. Outlines the process of using foam board and markers to create various shapes and optical effects. (DSK)

  15. STEM Education Related Dissertation Abstracts: A Bounded Qualitative Meta-Study

    ERIC Educational Resources Information Center

    Banning, James; Folkestad, James E.

    2012-01-01

    This article utilizes a bounded qualitative meta-study framework to examine the 101 dissertation abstracts found by searching the ProQuest Dissertation and Theses[TM] digital database for dissertations abstracts from 1990 through 2010 using the search terms education, science, technology, engineer, and STEM/SMET. Professional search librarians…

  16. STEM Education Related Dissertation Abstracts: A Bounded Qualitative Meta-study

    NASA Astrophysics Data System (ADS)

    Banning, James; Folkestad, James E.

    2012-12-01

    This article utilizes a bounded qualitative meta-study framework to examine the 101 dissertation abstracts found by searching the ProQuest Dissertation and Theses™ digital database for dissertations abstracts from 1990 through 2010 using the search terms education, science, technology, engineer, and STEM/SMET. Professional search librarians established the search criteria used to establish the database. The overarching research question for this study was: What can we learn from the examination of doctoral dissertations abstracts that focus on the STEM education found from 1990 through 2010? The study's findings provide an overview of doctoral research related to STEM education and the discussion section focuses on quality of abstracts, questions regarding the use of the pipeline metaphor, and location of instructional innovation.

  17. A Comparative Study of Effect of New and Old Science Curriculum on Chinese Junior High School Students' Abstract Thinking

    ERIC Educational Resources Information Center

    Hu, Weiping; Chen, Ming

    2008-01-01

    "Teenagers' abstract thinking ability test" was designed in accordance with the structure and performance of teenagers' ability to think abstractly. 138 Chinese junior high school students who learned New curriculum and old curriculum separately were measured. A comparison between the two kinds of students shows that abstract thinking ability of…

  18. Spatiotemporal dynamics during processing of abstract and concrete verbs: an ERP study.

    PubMed

    Dalla Volta, Riccardo; Fabbri-Destro, Maddalena; Gentilucci, Maurizio; Avanzini, Pietro

    2014-08-01

    Different accounts have been proposed to explain the nature of concept representations. Embodied accounts claim a key involvement of sensory-motor systems during semantic processing while more traditional accounts posit that concepts are abstract mental entities independent of perceptual and motor brain systems. While the involvement of sensory-motor areas in concrete language processing is supported by a large number of studies, this involvement is far from being established when considering abstract language. The present study addressed abstract and concrete verb processing, by investigating the spatiotemporal dynamics of evoked responses by means of high density EEG while participants performed a semantic decision task. In addition, RTs to the same set of stimuli were collected. In both early and late time intervals, ERP scalp topography significantly differed according to word categories. Concrete verbs showed involvement of parieto-frontal networks for action, according to the implied body effector. In contrast, abstract verbs recruited mostly frontal regions outside the motor system, suggesting a non-motor semantic processing for this category. In addition, differently from what has been reported during action observation, the parietal recruitment related to concrete verbs presentation followed the frontal one. The present findings suggest that action word semantic is grounded in sensory-motor systems, provided a bodily effector is specified, while abstract concepts׳ representation cannot be easily explained by a motor embodiment. PMID:24956569

  19. Commercial Database Design vs. Library Terminology Comprehension: Why Do Students Print Abstracts Instead of Full-Text Articles?

    ERIC Educational Resources Information Center

    Imler, Bonnie; Eichelberger, Michelle

    2014-01-01

    When asked to print the full text of an article, many undergraduate college students print the abstract instead of the full text. This study seeks to determine the underlying cause(s) of this confusion. In this quantitative study, participants (n = 40) performed five usability tasks to assess ease of use and usefulness of five commercial library…

  20. Abstracts: US-International Biological Program ecosystems analysis studies. Volume 5. No. 3-4

    SciTech Connect

    Watts, J.A.; Myers, V.G.

    1980-12-01

    This issue documents 1149 entries to the US/IBP Abstracts computerized data base and completes the Abstracts journal series. Contributions from all five US/IBP biomes (Coniferous Forest, Desert, Eastern Deciduous Forest, Grassland, and Tundra) are included. Citations only for theses are included as abstracts were not available to the Ecosystem Analysis Data Center staff. Presentations and literature publications from the Desert Biome (Desert Biome 1975) have also been included in order to document the results of the US/IBP studies as completely as possible. Publication lists submitted by each biome (Brown 1977, Desert Biome 1975, Grassland Biome 1976, Coniferous Forest 1976, Eastern Deciduous Forest 1979) were used in compiling this volume.

  1. An Eye-Tracking Study of Learning from Science Text with Concrete and Abstract Illustrations

    ERIC Educational Resources Information Center

    Mason, Lucia; Pluchino, Patrik; Tornatora, Maria Caterina; Ariasi, Nicola

    2013-01-01

    This study investigated the online process of reading and the offline learning from an illustrated science text. The authors examined the effects of using a concrete or abstract picture to illustrate a text and adopted eye-tracking methodology to trace text and picture processing. They randomly assigned 59 eleventh-grade students to 3 reading…

  2. On Abstractions and Simplifications in the Design of Human-Automation Interfaces

    NASA Technical Reports Server (NTRS)

    Heymann, Michael; Degani, Asaf; Clancy, Daniel (Technical Monitor)

    2002-01-01

    This report addresses the design of human-automation interaction from a formal perspective that focuses on the information content of the interface, rather than the design of the graphical user interface. It also addresses the issue of the information provided to the user (e.g., user-manuals, training material, and all other resources). In this report, we propose a formal procedure for generating interfaces and user-manuals. The procedure is guided by two criteria: First, the interface must be correct, that is, with the given interface the user will be able to perform the specified tasks correctly. Second, the interface should be succinct. The report discusses the underlying concepts and the formal methods for this approach. Two examples are used to illustrate the procedure. The algorithm for constructing interfaces can be automated, and a preliminary software system for its implementation has been developed.

  3. On Abstractions and Simplifications in the Design of Human-Automation Interfaces

    NASA Technical Reports Server (NTRS)

    Heymann, Michael; Degani, Asaf; Shafto, Michael; Meyer, George; Clancy, Daniel (Technical Monitor)

    2001-01-01

    This report addresses the design of human-automation interaction from a formal perspective that focuses on the information content of the interface, rather than the design of the graphical user interface. It also addresses the, issue of the information provided to the user (e.g., user-manuals, training material, and all other resources). In this report, we propose a formal procedure for generating interfaces and user-manuals. The procedure is guided by two criteria: First, the interface must be correct, i.e., that with the given interface the user will be able to perform the specified tasks correctly. Second, the interface should be as succinct as possible. The report discusses the underlying concepts and the formal methods for this approach. Several examples are used to illustrate the procedure. The algorithm for constructing interfaces can be automated, and a preliminary software system for its implementation has been developed.

  4. ABSTRACT: Design of Groundwater Monitoring Networks Considering Conceptual Model and Parametric Uncertainty

    SciTech Connect

    A. Hassan; H. Bekhit; Y. Zhang; J. Chapman

    2008-09-15

    Uncertainty built into conceptual groundwater flow and transport models and associated parametric uncertainty should be appropriately included when such models are used to develop detection monitoring networks for contaminated sites. We compare alternative approaches of propagating such uncertainty from the flow and transport model into the network design. The focus is on detection monitoring networks where the primary objective is to intercept the contaminant before it reaches a boundary of interest (e.g., compliance boundary). Different uncertainty propagation approaches identify different well locations and different well combinations (networks) as having the highest detection efficiency. It is thus recommended that multiple uncertainty propagation approaches are considered. If several approaches yield consistent results in terms of identifying the best performing candidate wells and the best performing well network for detecting a contaminant plume, this would provide confidence in the suitability of the selected well locations.

  5. An ERP study of recognition memory for concrete and abstract pictures in school-aged children.

    PubMed

    Boucher, Olivier; Chouinard-Leclaire, Christine; Muckle, Gina; Westerlund, Alissa; Burden, Matthew J; Jacobson, Sandra W; Jacobson, Joseph L

    2016-08-01

    Recognition memory for concrete, nameable pictures is typically faster and more accurate than for abstract pictures. A dual-coding account for these findings suggests that concrete pictures are processed into verbal and image codes, whereas abstract pictures are encoded in image codes only. Recognition memory relies on two successive and distinct processes, namely familiarity and recollection. Whether these two processes are similarly or differently affected by stimulus concreteness remains unknown. This study examined the effect of picture concreteness on visual recognition memory processes using event-related potentials (ERPs). In a sample of children involved in a longitudinal study, participants (N=96; mean age=11.3years) were assessed on a continuous visual recognition memory task in which half the pictures were easily nameable, everyday concrete objects, and the other half were three-dimensional abstract, sculpture-like objects. Behavioral performance and ERP correlates of familiarity and recollection (respectively, the FN400 and P600 repetition effects) were measured. Behavioral results indicated faster and more accurate identification of concrete pictures as "new" or "old" (i.e., previously displayed) compared to abstract pictures. ERPs were characterized by a larger repetition effect, on the P600 amplitude, for concrete than for abstract images, suggesting a graded recollection process dependent on the type of material to be recollected. Topographic differences were observed within the FN400 latency interval, especially over anterior-inferior electrodes, with the repetition effect more pronounced and localized over the left hemisphere for concrete stimuli, potentially reflecting different neural processes underlying early processing of verbal/semantic and visual material in memory. PMID:27329352

  6. Ab initio kinetics studies of hydrogen atom abstraction from methyl propanoate.

    PubMed

    Tan, Ting; Yang, Xueliang; Ju, Yiguang; Carter, Emily A

    2016-02-14

    The kinetics of hydrogen abstraction by five radicals (H, CH3, O((3)P), OH, and HO2) from a biodiesel surrogate, methyl propanoate (MP), is theoretically investigated. We employ high-level ab initio quantum chemistry methods, coupled-cluster singles and doubles with perturbative triples correction (CCSD(T)) and multi-reference singles and doubles configuration interaction (MRSDCI) with the Davidson-Silver (DS) correction, and obtain chemically accurate reaction energetics. Overall, MRSDCI + DS predicts comparable energetics to CCSD(T) for MP + H/CH3/O/OH. The rate constants are computed using transition state theory (TST-Rice-Ramsperger-Kassel-Marcus theory) in conjunction with the separable-hindered-rotor approximation, variable reaction coordinate TST, and the multi-structure all-structure (MS-AS) approach. A simplified method, semi-multi-structure, is also employed for MP + OH/HO2, and the rate coefficients with this less expensive method are in good agreement with the results obtained with the MS-AS method. The fitted modified Arrhenius expressions are provided over a temperature range of 250 to 2000 K. The predicted rate coefficients for MP + OH agree remarkably well with experimental data over a wide temperature range. Branching ratio analysis of all the studied reactions shows that abstractions of the secondary H atoms within MP are expected to dominate the consumption of fuel at low temperatures, and the contributions of abstractions from the two methyl groups increase with temperature for all abstracting radicals. PMID:26796249

  7. Theory-guided design of Ti-based binaries for human implants (abstract only)

    NASA Astrophysics Data System (ADS)

    Friak, Martin; Sander, Benedikt; Raabe, Dierk; Neugebauer, Jörg

    2008-02-01

    State-of-the-art ab initio methods constitute a solid basis of modern materials science and materials design. The theoretical research is nowadays increasingly combined with mesoscale and macroscale approaches as well as advanced experimental techniques in order to address complex multiscale and finite-temperature phenomena. The applicability of such a interdisciplinary methodology will be exemplified by our development of novel alloys for human implants, particularly the improvement of hip transplants. The progress in this field is severely hampered by a lack of suitable materials which are biocompatible in terms of non-toxicity and mechanical properties. The aim of our research has been therefore to identify metallurgical trends for non-poisonous Ti-based alloys employing quantum-mechanical calculations. Guided by the theoretical calculations of phase stability and elastic properties, selected alloys were actually melted, cast, and heat treated to a homogeneous state. The samples have been experimentally characterized by x-ray methods and electron microscopy, including crystallographic and chemical analysis, and mechanically tested using ultrasound measurements. The experimental data obtained in these experiments are in excellent agreement with theoretical predictions.

  8. Discrete Abstractions of Hybrid Systems: Verification of Safety and Application to User-Interface Design

    NASA Technical Reports Server (NTRS)

    Oishi, Meeko; Tomlin, Claire; Degani, Asaf

    2003-01-01

    Human interaction with complex hybrid systems involves the user, the automation's discrete mode logic, and the underlying continuous dynamics of the physical system. Often the user-interface of such systems displays a reduced set of information about the entire system. In safety-critical systems, how can we identify user-interface designs which do not have adequate information, or which may confuse the user? Here we describe a methodology, based on hybrid system analysis, to verify that a user-interface contains information necessary to safely complete a desired procedure or task. Verification within a hybrid framework allows us to account for the continuous dynamics underlying the simple, discrete representations displayed to the user. We provide two examples: a car traveling through a yellow light at an intersection and an aircraft autopilot in a landing/go-around maneuver. The examples demonstrate the general nature of this methodology, which is applicable to hybrid systems (not fully automated) which have operational constraints we can pose in terms of safety. This methodology differs from existing work in hybrid system verification in that we directly account for the user's interactions with the system.

  9. LOXT mirror design study

    NASA Technical Reports Server (NTRS)

    Vanspeybroeck, L.; Antrim, W.; Boyd, D.; Giacconi, R.; Sinnamon, G.; Stille, F.

    1972-01-01

    The final report for the large orbiting X-ray telescope (LOXT) high resolution mirror design study is presented. The following tasks were performed: (1) Generation of a reference and alternate preliminary design for the LOXT high resolution mirror assembly, which will meet the LOXT scientific requirements, and are within the present state of the art of materials and fabrication techniques. (2) Measurement, in X-rays, of the scattering properties of a variety of optical flats, embodying materials, coatings, and polishing techniques which might be applicable to the flight configuration LOXT high resolution mirror. (3) Preparation of a procurement specification for a paraboloid test mirror of the size of the innermost paraboloid of the high resolution mirror assembly, including the design requirements for the reference design evolved from this preliminary design study. The results of the engineering and scientific analysis and the conclusions drawn are presented. The procurement specification for the test mirror is included.

  10. Computational materials science aided design of glass ceramics and crystal properties (abstract only)

    NASA Astrophysics Data System (ADS)

    Mannstadt, Wolfgang

    2008-02-01

    Today's high tech materials have in many cases highly specialized properties and designed functionalities. Materials parameters like high temperature stability, high stiffness and certain optical properties have to be optimized and in many cases an adaptation to given processes is necessary. Many materials are compounds or layered structures. Thus, surface and interface properties need to be considered as well. At the same time to some extent just a few atomic layers sometimes determine the properties of the material, as is well known in semiconductor and other thin film technologies. Therefore, a detailed understanding of the materials properties at the atomic scale becomes more and more important. In addition many high tech materials have to be of high purity or selective dopant concentrations have to be adjusted to fulfill the desired functionality. Modern materials developments successfully use computational materials science to achieve that goal. Improved software tools and continuously growing computational power allow us to predict macroscopic properties of materials on the basis of microscopic/atomic ab initio simulation approaches. At Schott, special materials, in particular glasses and glass ceramics, are produced for a variety of applications. For a glass ceramic all the above mentioned difficulties for materials development arise. The properties of a glass ceramic are determined by the interplay of crystalline phases embedded in an amorphous glass matrix. For materials development the understanding of crystal structures and their properties, surfaces and interface phenomena, and amorphous systems are necessary, likewise. Each by itself is already a challenging problem. Many crystal phases that are grown within the glass matrix do not exist as single crystals or are difficult to grow in reasonable amounts for experimental investigations. The only way to obtain the properties of these crystalline phases is through 'ab initio' simulations in the computer

  11. Computational materials science aided design of glass ceramics and crystal properties (abstract only).

    PubMed

    Mannstadt, Wolfgang

    2008-02-13

    Today's high tech materials have in many cases highly specialized properties and designed functionalities. Materials parameters like high temperature stability, high stiffness and certain optical properties have to be optimized and in many cases an adaptation to given processes is necessary. Many materials are compounds or layered structures. Thus, surface and interface properties need to be considered as well. At the same time to some extent just a few atomic layers sometimes determine the properties of the material, as is well known in semiconductor and other thin film technologies. Therefore, a detailed understanding of the materials properties at the atomic scale becomes more and more important. In addition many high tech materials have to be of high purity or selective dopant concentrations have to be adjusted to fulfill the desired functionality. Modern materials developments successfully use computational materials science to achieve that goal. Improved software tools and continuously growing computational power allow us to predict macroscopic properties of materials on the basis of microscopic/atomic ab initio simulation approaches. At Schott, special materials, in particular glasses and glass ceramics, are produced for a variety of applications. For a glass ceramic all the above mentioned difficulties for materials development arise. The properties of a glass ceramic are determined by the interplay of crystalline phases embedded in an amorphous glass matrix. For materials development the understanding of crystal structures and their properties, surfaces and interface phenomena, and amorphous systems are necessary, likewise. Each by itself is already a challenging problem. Many crystal phases that are grown within the glass matrix do not exist as single crystals or are difficult to grow in reasonable amounts for experimental investigations. The only way to obtain the properties of these crystalline phases is through 'ab initio' simulations in the computer

  12. Moving Away from Ones and Zeros, Designing a Ground Data System Based on Higher Levels of Abstraction

    NASA Technical Reports Server (NTRS)

    Tankenson, Michael

    2008-01-01

    Previous JPL ground systems have been designed with the Ground Data System (GDS) engineer in mind. The focus on these systems has been on packaging and delivery of low level information (frames, packets, telemetry values) to the end user. It was not that long ago when project teams would be huddled over a workstation, examining crude displays of telemetry bits organized in various ways, trying to determine the status of a spacecraft. Understanding the data often required additional levels of GDS expertise, or worse, transformation of the raw data into alternative formats followed by ingestion into other tools so that the data became meaningful. The primary focus was often to answer these types of questions: "Why did this particular frame fail Reed-Solomon decode? Why did this packet get marked as invalid? Why am I missing a block of telemetry from my query?" -- which are completely valid questions to ask from a GDS Engineer's point of view, and large families of tools have been designed to help answer these questions. But these are not the questions that most users care about - which are more like: "Why is the battery state of charge trending down? Show me a summary image report for the last traverse to the target. Show me a data accountability summary for the last DSN pass." Answers to these questions, which are what users are looking for, requires a higher level of abstraction and supporting tools than mining through ones and zeros. JPL has created a next generation capability called the Mission Data Processing and Control System (MPCS) which is designed to support this higher level of abstraction by providing customizable views of the ground system combining collections of lower level information into more meaningful ways. Instead of examining frames, packets, and individual telemetry data points -- MPCS is capable of providing comprehensive summary reports, product status, overall flight/ground event status, as well as payload health summaries. Based on these

  13. Motorcycle safety, environmental effects, and performance studies. 1964-June, 1980 (a bibliography with abstracts). Report for 1964-June 1980

    SciTech Connect

    Kenton, E.

    1980-07-01

    The reports cited in this bibliography primarily are concerned with motorcycle safety and pollution. These studies cover safety equipment and education, visual and visibility factors, noise, fuel consumption, engine performance, air pollution, vehicle design, tire and brake characteristics, and illuminating systems. Testing programs are described for both machines and operators, underlining impact and anthropomorphic crash data. Training programs are noted for drivers. Particular attention is given to accident prevention, safety helmets, and protective clothing. (This updated bibliography contains 172 abstracts, 37 of which are new entries to the previous edition.)

  14. Design Issues in Transgender Studies

    PubMed Central

    Emel, Lynda; Hanscom, Brett; Zangeneh, Sahar

    2016-01-01

    Abstract: Transgender individuals constitute an important focus for HIV prevention, but studies in this population present some unique methodologic and operational challenges. We consider issues related to sampling, sample size, number of sites, and trial cost. We discuss relevant design issues for evaluating interventions in both HIV-negative and HIV-infected transgender populations, as well as a method for assessing the impact of an intervention on population HIV incidence. We find that HIV-endpoint studies of transgender individuals will likely require fewer participants but more sites and have higher operational costs than HIV prevention trials in other populations. Because any intervention targeted to transgender individuals will likely include antiretroviral drugs, small scale studies looking at potential interactions between antiretroviral therapy and hormone therapy are recommended. Finally, assessing the impact of an intervention targeted to transgender individuals will require better information on the contribution of such individuals to the population HIV incidence. PMID:27429191

  15. Ab initio study of the kinetics of hydrogen abstraction reactions on toluene and tetralin

    SciTech Connect

    Beste, Ariana; Britt, Phillip F; Buchanan III, A C; Harrison, Robert J; Hathorn, Bryan C

    2008-01-01

    Hydrogen abstraction reactions play a key role in many thermal and catalytic processes involved in the production of fuels and chemicals. In this paper, the reaction barriers and rate constants for the hydrogen abstraction reactions on toluene and tetralin by the benzyl radical are calculated by ab initio methods. These reactions are representatives of similar reactions occurring in the thermolysis of lignin model compounds containing the phenethyl phenyl ether (PPE) structural moiety. Thermolysis of PPE occurs by a free radical chain mechanism in which the product selectivity arises from competitive hydrogen abstraction at the benzylic and nonbenzylic methylen sites by chain carrying benzyl and phenoxyl radicals. The title reactions serve to calibrate the theoretical methods to be used in the study of PPE through comparison of the rate constants and the reaction enthalpies with reliable experimental values. In this study, we used two different hybrid density functionals (BHandHLYP, B3LYP) and second-order perturbation theory to obtain equilibrium and transition state geometries. Multiple transition states were found for both reactions. BHandHLYP underestimates and second-order perturbation theory overestimates the reaction barriers; B3LYP energy barriers agree well with experiment. Absolute and relative rate constants were calculated using transition state theory. We found that the relative rate constant using the B3LYP functional agrees within a factor of 2.0 with experiment at the experimental temperature of 333 K, indicating that the B3LYP functional will be successful in predicting relative rate constants for hydrogen abstraction reactions participating in the pyrolysis of PPE.

  16. Abstract Painting

    ERIC Educational Resources Information Center

    Henkes, Robert

    1978-01-01

    Abstract art provokes numerous interpretations, and as many misunderstandings. The adolescent reaction is no exception. The procedure described here can help the student to understand the abstract from at least one direction. (Author/RK)

  17. Abstracts: US-International Biological Program ecosystems analysis studies. Volume 5. No. 2

    SciTech Connect

    Watts, J.A.; Myers, V.G.

    1980-12-01

    This issue documents 162 entries to the US/IBP Abstracts computerized data base. Only contributions from the Eastern Deciduous Forest Biome (EDFB) and the Tundra Biome (TNB) are included. Literature contributions and numeric data are abstracted in this volume.

  18. Study Design for Sequencing Studies.

    PubMed

    Honaas, Loren A; Altman, Naomi S; Krzywinski, Martin

    2016-01-01

    Once a biochemical method has been devised to sample RNA or DNA of interest, sequencing can be used to identify the sampled molecules with high fidelity and low bias. High-throughput sequencing has therefore become the primary data acquisition method for many genomics studies and is being used more and more to address molecular biology questions. By applying principles of statistical experimental design, sequencing experiments can be made more sensitive to the effects under study as well as more biologically sound, hence more replicable. PMID:27008009

  19. Ab initio study for the hydrogen abstraction reactions on toluene and tetralin.

    SciTech Connect

    Beste, Ariana; Harrison, Robert J; Britt, Phillip F; Buchanan III, A C

    2006-01-01

    Hydrogen abstraction reactions play a key role in many thermal and catalytic processes involved in the production of fuels and chemicals. In this paper, the hydrogen abstraction reactions on toluene and tetralin by the benzyl radical are investigated by ab initio methods. These reactions are representatives of similar reactions occurring in the thermolysis of lignin model compounds containing the phenethyl phenyl ether (PPE) structural moiety. The title reactions serve to calibrate the theoretical methods to be used in the study of PPE pyrolysis through comparison of the reaction barriers with reliable experimental values. We used two different hybrid density functionals (BHandHLYP, B3LYP) and second-order perturbation theory to obtain equilibrium and transition state geometries. We recomputed selected energy barriers at the B3LYP geometries with the coupled cluster singles and doubles (CCSD) method. Multiple transition states were found for both reactions. BHandHLYP underestimates and second-order perturbation theory overestimates the reaction barriers; B3LYP energy barriers agree well with experiment and the corresponding CCSD energy barriers. The flat potential energy surface around the saddle points causes numerical inaccuracies. We observe the break down of the harmonic approximation in the calculation of low frequencies.

  20. Theoretical study of the kinetics of chlorine atom abstraction from chloromethanes by atomic chlorine.

    PubMed

    Brudnik, Katarzyna; Twarda, Maria; Sarzyński, Dariusz; Jodkowski, Jerzy T

    2013-10-01

    Ab initio calculations at the G3 level were used in a theoretical description of the kinetics and mechanism of the chlorine abstraction reactions from mono-, di-, tri- and tetra-chloromethane by chlorine atoms. The calculated profiles of the potential energy surface of the reaction systems show that the mechanism of the studied reactions is complex and the Cl-abstraction proceeds via the formation of intermediate complexes. The multi-step reaction mechanism consists of two elementary steps in the case of CCl4 + Cl, and three for the other reactions. Rate constants were calculated using the theoretical method based on the RRKM theory and the simplified version of the statistical adiabatic channel model. The temperature dependencies of the calculated rate constants can be expressed, in temperature range of 200-3,000 K as [Formula: see text]. The rate constants for the reverse reactions CH3/CH2Cl/CHCl2/CCl3 + Cl2 were calculated via the equilibrium constants derived theoretically. The kinetic equations [Formula: see text] allow a very good description of the reaction kinetics. The derived expressions are a substantial supplement to the kinetic data necessary to describe and model the complex gas-phase reactions of importance in combustion and atmospheric chemistry. PMID:23455925

  1. Identification and Descriptions of the Momentum Effect in Studies of Learning: An Abstract Science Concept.

    ERIC Educational Resources Information Center

    Kwon, Jae-Sool; Mayer, Victor J.

    1985-01-01

    Several studies of the validity of the intensive time-series design have revealed a post-intervention increase in the level of achievement data (the "momentum effect"). Reports on the development and use of a technique to study the effect as it is observed in several data sets on the learning of plate tectonics. (Author/JN)

  2. Abstract or Concrete Examples in Learning Mathematics? A Replication and Elaboration of Kaminski, Sloutsky, and Heckler's Study

    ERIC Educational Resources Information Center

    De Bock, Dirk; Deprez, Johan; Van Dooren, Wim; Roelens, Michel; Verschaffel, Lieven

    2011-01-01

    Kaminski, Sloutsky, and Heckler (2008a) published in "Science" a study on "The advantage of abstract examples in learning math," in which they claim that students may benefit more from learning mathematics through a single abstract, symbolic representation than from multiple concrete examples. This publication elicited both enthusiastic and…

  3. Slurry reactor design studies

    SciTech Connect

    Fox, J.M.; Degen, B.D.; Cady, G.; Deslate, F.D.; Summers, R.L. ); Akgerman, A. ); Smith, J.M. )

    1990-06-01

    The objective of these studies was to perform a realistic evaluation of the relative costs of tublar-fixed-bed and slurry reactors for methanol, mixed alcohols and Fischer-Tropsch syntheses under conditions where they would realistically be expected to operate. The slurry Fischer-Tropsch reactor was, therefore, operated at low H{sub 2}/CO ratio on gas directly from a Shell gasifier. The fixed-bed reactor was operated on 2.0 H{sub 2}/CO ratio gas after adjustment by shift and CO{sub 2} removal. Every attempt was made to give each reactor the benefit of its optimum design condition and correlations were developed to extend the models beyond the range of the experimental pilot plant data. For the methanol design, comparisons were made for a recycle plant with high methanol yield, this being the standard design condition. It is recognized that this is not necessarily the optimum application for the slurry reactor, which is being proposed for a once-through operation, coproducing methanol and power. Consideration is also given to the applicability of the slurry reactor to mixed alcohols, based on conditions provided by Lurgi for an Octamix{trademark} plant using their standard tubular-fixed reactor technology. 7 figs., 26 tabs.

  4. Seal design alternatives study

    SciTech Connect

    Van Sambeek, L.L.

    1993-06-01

    This report presents the results from a study of various sealing alternatives for the WIPP sealing system. Overall, the sealing system has the purpose of reducing to the extent possible the potential for fluids (either gas or liquid) from entering or leaving the repository. The sealing system is divided into three subsystems: drift and panel seals within the repository horizon, shaft seals in each of the four shafts, and borehole seals. Alternatives to the baseline configuration for the WIPP seal system design included evaluating different geometries and schedules for seal component installations and the use of different materials for seal components. Order-of-magnitude costs for the various alternatives were prepared as part of the study. Firm recommendations are not presented, but the advantages and disadvantages of the alternatives are discussed. Technical information deficiencies are identified and studies are outlined which can provide required information.

  5. Shuttle communications design study

    NASA Technical Reports Server (NTRS)

    Cartier, D. E.

    1975-01-01

    The design and development of a space shuttle communication system are discussed. The subjects considered include the following: (1) Ku-band satellite relay to shuttle, (2) phased arrays, (3) PN acquisition, (4) quadriplexing of direct link ranging and telemetry, (5) communications blackout on launch and reentry, (6) acquisition after blackout on reentry, (7) wideband communications interface with the Ku-Band rendezvous radar, (8) aeroflight capabilities of the space shuttle, (9) a triple multiplexing scheme equivalent to interplex, and (10) a study of staggered quadriphase for use on the space shuttle.

  6. English and French Journal Abstracts in the Language Sciences: Three Exploratory Studies

    ERIC Educational Resources Information Center

    Van Bonn, Sarah; Swales, John M.

    2007-01-01

    This article compares French and English academic article abstracts from the language sciences in an attempt to understand how and why language choice might affect this part-genre--both in actual use and according to authors' linguistic and rhetorical perceptions. Two corpora are used: Corpus A consists of abstracts from a French linguistics…

  7. Youth Studies Abstracts. Vol. 3 No. 4 and Index 1981-84: Subject Index, Author Index.

    ERIC Educational Resources Information Center

    Youth Studies Abstracts, 1984

    1984-01-01

    This quarterly publication contains 106 abstracts of educational materials published in Australia, covering social and educational developments, programs, and program materials. In the first two sections of the document, the abstracts are arranged in clusters according to prime subject matter. The topics covered, listed at the front of the…

  8. A study of understanding: Alchemy, abstraction, and circulating reference in tertiary science education

    NASA Astrophysics Data System (ADS)

    Merritt, Brett W.

    Understanding is widely touted to be of paramount importance for education. This is especially true in science education research and development where understanding is heralded as one of the cornerstones of reform. Teachers are expected to teach for understanding and students are expected to learn with understanding. This dissertation is an empirical study of the concept of understanding. After analyzing various constructions of understanding in current U.S. education literature, I suggest that understanding is defined by five distinct features---they are knowledge (or knowledge base), coherence, transfer, extrapolation, and cognition--- and that these features are heavily informed and shaped by the psychological sciences. This relationship is neither good nor bad, I argue, but it means that teaching for and learning with understanding are not heavily informed and shaped by, for example, the natural sciences. Drawing from historical, philosophical, and anthropological perspectives of science, but especially from the work of Bruno Latour, I enact a radical revision(ing) of psychological notions such as "abstraction" and "transfer." The two main purposes of this re-visioning are (1) to draw critical attention to particular characteristics of a cognitive learning theory that emphasizes abstract concepts, and (2) to align many of the principles and tools used in science education more closely with those used in empirical scientific research. Finally, by bringing some examples of teaching and learning from an undergraduate biology classroom into conversation with both psychological and empirical practices and perspectives, I suggest that problematizing the current construction of understanding creates much needed room in mainstream science education for more empirical forms of learning and styles of teaching. A shift to such forms and styles, I conclude, should prove to be more inclusive and less constraining for both students and teachers.

  9. Writing Abstracts for MLIS Research Proposals Using Worked Examples: An Innovative Approach to Teaching the Elements of Research Design

    ERIC Educational Resources Information Center

    Ondrusek, Anita L.; Thiele, Harold E.; Yang, Changwoo

    2014-01-01

    The authors examined abstracts written by graduate students for their research proposals as a requirement for a course in research methods in a distance learning MLIS program. The students learned under three instructional conditions that involved varying levels of access to worked examples created from abstracts representing research in the LIS…

  10. Definition of tolerance to continuous hyperoxia in man - An abstract report of Predictive Studies V

    NASA Technical Reports Server (NTRS)

    Lambertsen, C. J.; Clark, J. M.; Gelfand, R.; Pisarello, J. B.; Cobbs, W. H.

    1987-01-01

    The overall goals, design, and procedures of Predictive Studies V are discussed as well as the specific elements of neural effects produced by prolonged hyperoxia. It is noted that Predictive Studies V study of oxygen poisoning in normal men during uninterrupted exposures to oxygen over the range of hyperbaric oxygen exposure most useful in diving, the treatment of gas lesion diseases, and general hyperbaric medicine. It is found that, throughout the study, the most striking observations were related to effects on visual function, on the lung, and the probable interactions of preconvulsive neural activity with effects on cardiovascular and respiratory-pulmonary functions.

  11. BWID System Design Study

    SciTech Connect

    O`Brien, M.C.; Rudin, M.J.; Morrison, J.L.; Richardson, J.G.

    1991-12-31

    The mission of the Buried Waste Integrated Demonstration (BWID) System Design Study is to identify and evaluate technology process options for the cradle-to-grave remediation of Transuranic (TRU)-Contaminated Waste Pits and Trenches buried at the Idaho National Engineering Laboratory (INEL). Emphasis is placed upon evaluating system configuration options and associated functional and operational requirements for retrieving and treating the buried wastes. A Performance-Based Technology Selection Filter was developed to evaluate the identified remediation systems and their enabling technologies based upon system requirements and quantification of technical Comprehensive Environmental Response, Compensation, and Liability (CERCLA) balancing criteria. Remediation systems will also be evaluated with respect to regulatory and institutional acceptance and cost-effectiveness.

  12. BWID System Design Study

    SciTech Connect

    O'Brien, M.C.; Rudin, M.J.; Morrison, J.L.; Richardson, J.G.

    1991-01-01

    The mission of the Buried Waste Integrated Demonstration (BWID) System Design Study is to identify and evaluate technology process options for the cradle-to-grave remediation of Transuranic (TRU)-Contaminated Waste Pits and Trenches buried at the Idaho National Engineering Laboratory (INEL). Emphasis is placed upon evaluating system configuration options and associated functional and operational requirements for retrieving and treating the buried wastes. A Performance-Based Technology Selection Filter was developed to evaluate the identified remediation systems and their enabling technologies based upon system requirements and quantification of technical Comprehensive Environmental Response, Compensation, and Liability (CERCLA) balancing criteria. Remediation systems will also be evaluated with respect to regulatory and institutional acceptance and cost-effectiveness.

  13. Conceptual design optimization study

    NASA Technical Reports Server (NTRS)

    Hollowell, S. J.; Beeman, E. R., II; Hiyama, R. M.

    1990-01-01

    The feasibility of applying multilevel functional decomposition and optimization techniques to conceptual design of advanced fighter aircraft was investigated. Applying the functional decomposition techniques to the conceptual design phase appears to be feasible. The initial implementation of the modified design process will optimize wing design variables. A hybrid approach, combining functional decomposition techniques for generation of aerodynamic and mass properties linear sensitivity derivatives with existing techniques for sizing mission performance and optimization, is proposed.

  14. Thermionic Reactor Design Studies

    SciTech Connect

    Schock, Alfred

    1994-06-01

    During the 1960's and early 70's the author performed extensive design studies, analyses, and tests aimed at thermionic reactor concepts that differed significantly from those pursued by other investigators. Those studies, like most others under Atomic Energy Commission (AEC and DOE) and the National Aeronautics and Space Administration (NASA) sponsorship, were terminated in the early 1970's. Some of this work was previously published, but much of it was never made available in the open literature. U.S. interest in thermionic reactors resumed in the early 80's, and was greatly intensified by reports about Soviet ground and flight tests in the late 80's. This recent interest resulted in renewed U.S. thermionic reactor development programs, primarily under Department of Defense (DOD) and Department of Energy (DOE) sponsorship. Since most current investigators have not had an opportunity to study all of the author's previous work, a review of the highlights of that work may be of value to them. The present paper describes some of the author's conceptual designs and their rationale, and the special analytical techniques developed to analyze their performance. The basic designs, first published in 1963, are based on single-cell converters, either double-ended diodes extending over the full height of the reactor core or single-ended diodes extending over half the core height. In that respect they are similar to the thermionic fuel elements employed in the Topaz-2 reactor subsequently developed in the Soviet Union, copies of which were recently imported by the U.S. As in the Topaz-2 case, electrically heated steady-state performance tests of the converters are possible before fueling. Where the author's concepts differed from the later Topaz-2 design was in the relative location of the emitter and the collector. Placing the fueled emitter on the outside of the cylindrical diodes permits much higher axial conductances to reduce ohmic losses in the electrodes of full

  15. Revisiting Caroline Furness's An Introduction to the Study of Variable Stars on its Centenary (Poster abstract)

    NASA Astrophysics Data System (ADS)

    Larsen, K.

    2016-06-01

    (Abstract only) A century and one month ago (October 1915) Dr. Caroline Ellen Furness (1869-1936), Director of the Vassar College Observatory, published An Introduction to the Study of Variable Stars. Issued in honor of the fiftieth anniversary of the founding of Vassar College, the work was meant to fill a void in the literature, namely as both an introduction to the topic of variable stars and as a manual explaining how they should be observed and the resulting data analyzed. It was judged to be one of the hundred best books written by an American woman in the last hundred years at the 1933 World's Fair in Chicago. The book covers the relevant history of and background on types of variable stars, star charts, catalogs, and the magnitude scale, then describes observing techniques, including visual, photographic, and photoelectric photometry. The work finishes with a discussion of light curves and patterns of variability, with a special emphasis on eclipsing binaries and long period variables. Furness's work is a valuable snapshot of the state of astronomical knowledge, technology, and observing techniques from a century ago. This presentation will analyze both Furness's book and its reception in the scientific community, and draw parallels to current advice given to beginning variable star observers.

  16. Geochemistry Model Abstraction and Sensitivity Studies for the 21 PWR CSNF Waste Package

    SciTech Connect

    P. Bernot; S. LeStrange; E. Thomas; K. Zarrabi; S. Arthur

    2002-10-29

    The CSNF geochemistry model abstraction, as directed by the TWP (BSC 2002b), was developed to provide regression analysis of EQ6 cases to obtain abstracted values of pH (and in some cases HCO{sub 3}{sup -} concentration) for use in the Configuration Generator Model. The pH of the system is the controlling factor over U mineralization, CSNF degradation rate, and HCO{sub 3}{sup -} concentration in solution. The abstraction encompasses a large variety of combinations for the degradation rates of materials. The ''base case'' used EQ6 simulations looking at differing steel/alloy corrosion rates, drip rates, and percent fuel exposure. Other values such as the pH/HCO{sub 3}{sup -} dependent fuel corrosion rate and the corrosion rate of A516 were kept constant. Relationships were developed for pH as a function of these differing rates to be used in the calculation of total C and subsequently, the fuel rate. An additional refinement to the abstraction was the addition of abstracted pH values for cases where there was limited O{sub 2} for waste package corrosion and a flushing fluid other than J-13, which has been used in all EQ6 calculation up to this point. These abstractions also used EQ6 simulations with varying combinations of corrosion rates of materials to abstract the pH (and HCO{sub 3}{sup -} in the case of the limiting O{sub 2} cases) as a function of WP materials corrosion rates. The goodness of fit for most of the abstracted values was above an R{sup 2} of 0.9. Those below this value occurred during the time at the very beginning of WP corrosion when large variations in the system pH are observed. However, the significance of F-statistic for all the abstractions showed that the variable relationships are significant. For the abstraction, an analysis of the minerals that may form the ''sludge'' in the waste package was also presented. This analysis indicates that a number a different iron and aluminum minerals may form in the waste package other than those

  17. Paper Abstract Animals

    ERIC Educational Resources Information Center

    Sutley, Jane

    2010-01-01

    Abstraction is, in effect, a simplification and reduction of shapes with an absence of detail designed to comprise the essence of the more naturalistic images being depicted. Without even intending to, young children consistently create interesting, and sometimes beautiful, abstract compositions. A child's creations, moreover, will always seem to…

  18. Modular antenna design study

    NASA Technical Reports Server (NTRS)

    Ribble, J. W.

    1981-01-01

    The mechanical design of a modular antenna concept was developed sufficiently to allow manufacture of a working demonstration model of a module, to predict mass properties, and to make performance estimates for antenna reflectors composed of these modules. The primary features of this concept are: (1) each module is an autonomous structural element which can be attached to adjacent modules through a three point connection; (2) the upper surface is a folding hexagonal truss plate mechanism which serves as the supporting structure for a reflective surface; and (3) the entire truss and surface can be folded into a cylindrical envelope in which all truss elements are essentially parallel. The kinematic studies and engineering demonstration model fully verified the deployment kinematics, stowing philosophy, and deployment sequencing for large antenna modules. It was established that such modules can be stowed in packages as small as 25 cm in diameter, using 1.27 cm diameter structural tubes. The development activity indicates that this deployable modular approach towards building large structures in space will support erection of 450 m apertures for operation up to 3 GHz with a single space shuttle flight.

  19. Computational study on SiH4 dissociation channels and H abstraction reactions

    NASA Astrophysics Data System (ADS)

    Hayashi, Toshio; Ishikawa, Kenji; Sekine, Makoto; Hori, Masaru

    2016-07-01

    The primary dissociation channels of SiH4 were investigated using computational chemistry. The results showed properties very similar to those of CH4. The main dissociation product was SiH2 and the second dissociation product was SiH3. SiH was produced through SiH3 to SiH + H2 dissociation by electronic excitation. H abstraction reactions by H and SiH3 were also calculated for SiH4, Si2H6, Si3H8, and Si9H14(100) cluster models. The energy barriers of H abstraction reactions were lower than those of SiH3 abstraction reactions. This result is considerably important for deposition in SiH4/H2 process plasma.

  20. Abstracts of SIG Sessions.

    ERIC Educational Resources Information Center

    Proceedings of the ASIS Annual Meeting, 1997

    1997-01-01

    Presents abstracts of SIG Sessions. Highlights include digital collections; information retrieval methods; public interest/fair use; classification and indexing; electronic publication; funding; globalization; information technology projects; interface design; networking in developing countries; metadata; multilingual databases; networked…

  1. Baseline Study of Women in South Africa with Postgraduate Physics Degrees (abstract)

    NASA Astrophysics Data System (ADS)

    Grayson, Diane J.

    2009-04-01

    A baseline study was conducted of women in South Africa who obtained BSc (Honours), MSc, or PhD degrees in physics and astronomy between 1995 and 2005. The first step involved identifying and contacting the women, using snowball sampling. These women were then asked to complete a questionnaire by e-mail. Responses to the questionnaire yielded information about the types of schools they attended, attitudes of their teachers, family history of studying science, influences on choosing to study physics, role models and mentors, employment history and aspects of a job that are important to them, experiences of gender bias, and suggestions for improving the situation for women in physics. This information is very valuable in designing programs, projects, and advocacy to encourage and retain women in physics, from school level to senior management. The methodology and questions developed can be useful to participants interested in obtaining similar information for their own countries.

  2. Reading and Study Skills and Instruction: Secondary: Abstracts of Doctoral Dissertations Published in "Dissertation Abstracts International," July through December 1981 (Vol. 42 Nos. 1 through 6).

    ERIC Educational Resources Information Center

    ERIC Clearinghouse on Reading and Communication Skills, Urbana, IL.

    This collection of abstracts is part of a continuing series providing information on recent doctoral dissertations. The ten titles deal with the following topics: (1) an inductive method for teaching three skills necessary for reading narrative fiction; (2) the use of reading strategies in secondary level content area classrooms; (3) seventh grade…

  3. Reading and Study Skills and Instruction: Preschool and Elementary: Abstracts of Doctoral Dissertations Published in "Dissertation Abstracts International," January through June 1984, (Vol. 44 Nos. 7 through 12).

    ERIC Educational Resources Information Center

    ERIC Clearinghouse on Reading and Communication Skills, Urbana, IL.

    This collection of abstracts is part of a continuing series providing information on recent doctoral dissertations. The 24 titles deal with a variety of topics, including the following: (1) inferential questions in four basal readers; (2) reading instruction in an effective school setting; (3) the social-emotional dimension of teacher-student…

  4. Scientific Affairs Division of NATO Advanced Study Institute: abstracts for nonequilibrium superconductivity, phonons and Kapitza boundaries

    SciTech Connect

    1980-05-01

    Abstracts of papers presented at the meeting are given. Topics covered include: Kapitza resistance; superconducting tunneling; energy gap enhancement in superconductors; instabilities in nonequilibrium superconducting states; exchange of charge between superconducting pairs and quasiparticles; motion of magnetic flux (flux flow); and other new phenomena. (GHT)

  5. On the Relation of Abstract and Concrete in Scientists' Graph Interpretations: A Case Study

    ERIC Educational Resources Information Center

    Roth, Wolff-Michael; Hwang, SungWon

    2006-01-01

    The notions of "abstract" and "concrete" are central to the conceptualization of mathematical knowing and learning. Much of the literature takes a dualist approach, leading to the privileging of the former term at the expense of the latter. In this article, we provide a concrete analysis of a scientist interpreting an unfamiliar graph to show how…

  6. Developmental Changes in Visual Scanning of Dynamic Faces and Abstract Stimuli in Infants: A Longitudinal Study

    ERIC Educational Resources Information Center

    Hunnius, Sabine; Geuze, Reint H.

    2004-01-01

    The characteristics of scanning patterns between the ages of 6 and 26 weeks were investigated through repeated assessments of 10 infants. Eye movements were recorded using a corneal-reflection system while the infants looked at 2 dynamic stimuli: the naturally moving face of their mother and an abstract stimulus. Results indicated that the way…

  7. A Comparative Study of Differences in Judged Relevance of Abstracts Located by Two Information Systems.

    ERIC Educational Resources Information Center

    Coulson, John

    Differences in judged relevance of Educational Resources Information Center (ERIC) abstracts identified by two different information systems were investigated. A national semi-private educational service agency which utilizes mechanical searching of the research literature was one information system, while the other was a regional,…

  8. Deficiencies in structured medical abstracts.

    PubMed

    Froom, P; Froom, J

    1993-07-01

    This study was carried out to determine if the content of structured abstracts conforms with recommendations of the Ad Hoc Working Group for the critical appraisal of the medical literature as adopted by the Annals of Internal Medicine. The study design was a survey. All articles published in Annals of Internal Medicine in 1991, excluding editorials, case-reports, literature reviews, decision analysis, studies in medical education, descriptive studies of clinical and basic phenomena, and papers lacking a structured abstract, were studied. Of a total of 150 articles, 20 were excluded. The abstract and text of each article were assessed for the presence of the following items; patient selection criteria, statements concerning extrapolation of findings, need for further study, and whether or not the information should be used now. Number of refusers, drop outs and reason(s) for drop outs were assessed for intervention and prospective cohort studies only. Deficiencies of assessed items were noted in both abstracts and texts. For abstracts, patient selection criteria, numbers of refusers, number of drop outs and reason(s) for drop outs were reported in 44.6% (58/130), 3.1% (4/130), 16.9% (14/83) and 2.4% (2/83) respectively. These items were reported more frequently in the texts 87.7% (114/130), 9.2% (12/130), 60.2% (50/83) and 37.3% (31/83) respectively (p < 0.05). Statements concerning extrapolation of findings, need for further study and use of information now were also more frequent in texts than abstracts (p < 0.0001). A large number of structured abstracts published in the Annals of Internal Medicine in 1991, lack information recommended by the Ad Hoc Working Group. Our findings should not be extrapolated to other journals requiring structured abstracts. PMID:8326342

  9. INVENTORY ABSTRACTION

    SciTech Connect

    G. Ragan

    2001-12-19

    The purpose of the inventory abstraction, which has been prepared in accordance with a technical work plan (CRWMS M&O 2000e for ICN 02 of the present analysis, and BSC 2001e for ICN 03 of the present analysis), is to: (1) Interpret the results of a series of relative dose calculations (CRWMS M&O 2000c, 2000f). (2) Recommend, including a basis thereof, a set of radionuclides that should be modeled in the Total System Performance Assessment in Support of the Site Recommendation (TSPA-SR) and the Total System Performance Assessment in Support of the Final Environmental Impact Statement (TSPA-FEIS). (3) Provide initial radionuclide inventories for the TSPA-SR and TSPA-FEIS models. (4) Answer the U.S. Nuclear Regulatory Commission (NRC)'s Issue Resolution Status Report ''Key Technical Issue: Container Life and Source Term'' (CLST IRSR) key technical issue (KTI): ''The rate at which radionuclides in SNF [spent nuclear fuel] are released from the EBS [engineered barrier system] through the oxidation and dissolution of spent fuel'' (NRC 1999, Subissue 3). The scope of the radionuclide screening analysis encompasses the period from 100 years to 10,000 years after the potential repository at Yucca Mountain is sealed for scenarios involving the breach of a waste package and subsequent degradation of the waste form as required for the TSPA-SR calculations. By extending the time period considered to one million years after repository closure, recommendations are made for the TSPA-FEIS. The waste forms included in the inventory abstraction are Commercial Spent Nuclear Fuel (CSNF), DOE Spent Nuclear Fuel (DSNF), High-Level Waste (HLW), naval Spent Nuclear Fuel (SNF), and U.S. Department of Energy (DOE) plutonium waste. The intended use of this analysis is in TSPA-SR and TSPA-FEIS. Based on the recommendations made here, models for release, transport, and possibly exposure will be developed for the isotopes that would be the highest contributors to the dose given a release to the

  10. Overstatements in abstract conclusions claiming effectiveness of interventions in psychiatry: a study protocol for a meta-epidemiological investigation

    PubMed Central

    Suganuma, Aya M; Shinohara, Kiyomi; Imai, Hissei; Takeshima, Nozomi; Hayasaka, Yu

    2016-01-01

    Introduction Abstracts are the major and often the most important source of information for readers of the medical literature. However, there is mounting criticism that abstracts often exaggerate the positive findings and emphasise the beneficial effects of intervention beyond the actual findings mentioned in the corresponding full texts. In order to examine the magnitude of this problem, we will introduce a systematic approach to detect overstated abstracts and to quantify the extent of their prevalence in published randomised controlled trials (RCTs) in the field of psychiatry. Methods and analysis We will source RCTs published in 2014 from the Cochrane Register of Controlled Trials (CENTRAL) that claim effectiveness of any intervention for mental disorders. The abstract conclusions will be categorised into three types: superior (only stating significant superiority of intervention to control), limited (suggesting that intervention has limited superiority to control) and equal (claiming equal effectiveness of intervention as control). The full texts will also be classified as one of the following based on the primary outcome results: significant (all primary outcomes were statistically significant in favour of the intervention), mixed (primary outcomes included both significant and non-significant results) or all non-significant results. By comparing the abstract conclusion classification and that of the corresponding full text, we will assess whether each study exhibited overstatements in its abstract conclusion. Ethics and dissemination This trial requires no ethical approval. We will publish our findings in a peer-reviewed journal. Trial registration number UMIN000018668; Pre-results. PMID:27103624

  11. How to Make a Good Animation: A Grounded Cognition Model of How Visual Representation Design Affects the Construction of Abstract Physics Knowledge

    ERIC Educational Resources Information Center

    Chen, Zhongzhou; Gladding, Gary

    2014-01-01

    Visual representations play a critical role in teaching physics. However, since we do not have a satisfactory understanding of how visual perception impacts the construction of abstract knowledge, most visual representations used in instructions are either created based on existing conventions or designed according to the instructor's…

  12. Thermionic Reactor Design Studies

    SciTech Connect

    Schock, Alfred

    1994-08-01

    Paper presented at the 29th IECEC in Monterey, CA in August 1994. The present paper describes some of the author's conceptual designs and their rationale, and the special analytical techniques developed to analyze their (thermionic reactor) performance. The basic designs, first published in 1963, are based on single-cell converters, either double-ended diodes extending over the full height of the reactor core or single-ended diodes extending over half the core height. In that respect they are similar to the thermionic fuel elements employed in the Topaz-2 reactor subsequently developed in the Soviet Union, copies of which were recently imported by the U.S. As in the Topaz-2 case, electrically heated steady-state performance tests of the converters are possible before fueling.

  13. Advanced turbocharger design study program

    NASA Technical Reports Server (NTRS)

    Culy, D. G.; Heldenbrand, R. W.; Richardson, N. R.

    1984-01-01

    The advanced Turbocharger Design Study consisted of: (1) the evaluation of three advanced engine designs to determine their turbocharging requirements, and of technologies applicable to advanced turbocharger designs; (2) trade-off studies to define a turbocharger conceptual design and select the engine with the most representative requirements for turbocharging; (3) the preparation of a turbocharger conceptual design for the Curtiss Wright RC2-32 engine selected in the trade-off studies; and (4) the assessment of market impact and the preparation of a technology demonstration plan for the advanced turbocharger.

  14. Abstract Interpreters for Free

    NASA Astrophysics Data System (ADS)

    Might, Matthew

    In small-step abstract interpretations, the concrete and abstract semantics bear an uncanny resemblance. In this work, we present an analysis-design methodology that both explains and exploits that resemblance. Specifically, we present a two-step method to convert a small-step concrete semantics into a family of sound, computable abstract interpretations. The first step re-factors the concrete state-space to eliminate recursive structure; this refactoring of the state-space simultaneously determines a store-passing-style transformation on the underlying concrete semantics. The second step uses inference rules to generate an abstract state-space and a Galois connection simultaneously. The Galois connection allows the calculation of the "optimal" abstract interpretation. The two-step process is unambiguous, but nondeterministic: at each step, analysis designers face choices. Some of these choices ultimately influence properties such as flow-, field- and context-sensitivity. Thus, under the method, we can give the emergence of these properties a graph-theoretic characterization. To illustrate the method, we systematically abstract the continuation-passing style lambda calculus to arrive at two distinct families of analyses. The first is the well-known k-CFA family of analyses. The second consists of novel "environment-centric" abstract interpretations, none of which appear in the literature on static analysis of higher-order programs.

  15. COMPUTER-AIDED INDEXING OF A SCIENTIFIC ABSTRACTS JOURNAL BY THE UDC WITH UNIDEK--A CASE STUDY.

    ERIC Educational Resources Information Center

    FREEMAN, ROBERT R.; RUSSELL, MARTIN

    THIS PAPER IS A CASE STUDY OF THE ADOPTION BY GEOSCIENCE ABSTRACTS OF UNIDEK, A COMPUTER-COMPILED SYSTEMATIC SUBJECT INDEX BASED ON THE UNIVERSAL DECIMAL CLASSIFICATION (UDC). EVENTS LEADING TO A DECISION TO ADOPT THE SYSTEM, SOME THEORY OF INDEXES, PROBLEMS INVOLVED IN CONVERSION, AND SOME OF THE RESULTS ACHIEVED ARE REVIEWED. UNIDEK MAKES…

  16. Ab initio study of the H + HONO reaction: Direct abstraction versus indirect exchange processes

    SciTech Connect

    Hsu, C.C.; Lin, M.C.; Mebel, A.M.; Melius, C.F.

    1997-01-02

    The mechanism of the H + HONO reaction (for which no experimental data are available) has been elucidated by ab initio molecular orbital calculations using modified G2 and BAC-MP4 methods. These results indicate that the reaction occurs predominantly by two indirect metathetical processes. One produces OH + HNO and H{sub 2}O + NO from the decomposition of vibrationally excited hydroxyl nitroxide, HN(O)OH, formed by H atom addition to the N atom of HONO. The other produces H{sub 2}O + NO from the decomposition of vibrationally excited dihydroxylamino radical, N(OH){sub 2}, formed by H atom addition to the terminal O atom. These indirect displacement processes are much more efficient than the commonly assumed, direct H-abstraction reaction producing H{sub 2} + NO{sub 2}. A transition-state theory calculation for the direct abstraction reaction and RRKM calculations for the two indirect displacement processes give rise to the following rate constants, in units of cm{sup 3} molecule{sup -1} s{sup -1} for the 300-3500 K temperature range under atmospheric conditions: k{sub H(2)} = 3.33 x 10{sup -16}T{sup 1.55} exp(-3328.5/T), k{sub OH} = 9.36 x 10{sup -14}T{sup 0.86} exp(-2500.8/T), k{sub H(2)O} = 1.35 x 10{sup -17}T{sup 1.89} exp-(-1935.7/T), where the rate constant for H{sub 2}O production represents the sum from both indirect displacement reactions. 32 refs., 3 figs., 7 tabs.

  17. The Tactile Dimensions of Abstract Paintings: A Cross-Modal Study.

    PubMed

    Albertazzi, Liliana; Bacci, Francesca; Canal, Luisa; Micciolo, Rocco

    2016-07-01

    In our research, we tested for the existence of cross-modal visual and tactile associations in the experience of abstract art. Specifically, we measured the association of 60 abstract paintings with four couples of antonyms related to texture, such as warm or cold, smooth or rough, lightweight or heavy, soft or hard, investigating if the different modality of presentation on a computer screen (color versions: natural colors, inverted colors, black and white) gave rise to different associations relative to the four couples of opponent qualities. Second, we tested whether there might be differences between the ratings of the paintings when they were presented as images on a computer screen versus in real life at the museum. The results confirmed that associations between visual and tactile experience with such complex stimuli exist. In the case of the couple warm or cold, a significant inversion of associated qualities occurs when the images are presented in inverted colors as opposed to natural colors; furthermore, when presented in black and white, warm evaluations are "cooled down," but cold evaluations remain the same. The degree of smoothness could be considered not associated with the color versions. When seen in black and white, both the mean softness and the mean lightweight-ness of the paintings were reduced; however, in the last case, this effect was more evident for the most lightweight pictures. There is only a slight difference between the two presentations of the paintings as images presented on a computer screen and seen in real life, relative to the warm or cold and soft or hard dimensions. Of the four opponent qualities, the three pairs warm or cold, lightweight or heavy, and soft or hard showed the most interesting results in relation to the cross-modal associations. PMID:27071636

  18. INTRODUCTION AND STUDY DESIGN

    EPA Science Inventory

    Under the sponsorship of the UNEP/ILO/IPCS, 17 laboratories from diverse regions of the world participated in evaluating the utility of four plant bioassays for detecting genetic hazards of environmental chemicals. he bioassays included in this collaborative study were Arabidopsi...

  19. Community Development Abstracts.

    ERIC Educational Resources Information Center

    Agency for International Development (Dept. of State), Washington, DC.

    This volume of 1,108 abstracts summarizes the majority of important works on community development during the last ten years. Part I contains abstracts of periodical literature and is classified into 19 sections, including general history, communications, community and area studies, decision-making, leadership, migration and settlement, social…

  20. Gas-Grain Simulation Facility: Fundamental studies of particle formation and interactions. Volume 2: Abstracts, candidate experiments and feasibility study

    NASA Technical Reports Server (NTRS)

    Fogleman, Guy (Editor); Huntington, Judith L. (Editor); Schwartz, Deborah E. (Editor); Fonda, Mark L. (Editor)

    1989-01-01

    An overview of the Gas-Grain Simulation Facility (GGSF) project and its current status is provided. The proceedings of the Gas-Grain Simulation Facility Experiments Workshop are recorded. The goal of the workshop was to define experiments for the GGSF--a small particle microgravity research facility. The workshop addressed the opportunity for performing, in Earth orbit, a wide variety of experiments that involve single small particles (grains) or clouds of particles. Twenty experiments from the fields of exobiology, planetary science, astrophysics, atmospheric science, biology, physics, and chemistry were described at the workshop and are outlined in Volume 2. Each experiment description included specific scientific objectives, an outline of the experimental procedure, and the anticipated GGSF performance requirements. Since these experiments represent the types of studies that will ultimately be proposed for the facility, they will be used to define the general science requirements of the GGSF. Also included in the second volume is a physics feasibility study and abstracts of example Gas-Grain Simulation Facility experiments and related experiments in progress.

  1. Pilot Study of Behavioral Treatment in Dementia Care Units.(practice Concepts)(author Abstract)

    ERIC Educational Resources Information Center

    Lichtenberg, Peter A.; Kemp-Havican, Julie; MacNeill, Susan E.; Johnson, Amanda Schafer

    2005-01-01

    Purpose: This article reports on the development and use of behavioral treatment as a well-being intervention for individuals with dementia residing at special care units in a nursing home. Design and Methods: The project took place upon the construction and opening of two new homelike units for dementia care in a rural community-care center.…

  2. X-ray Ross filter method for impurity transport studies on DIII-D (abstract)

    NASA Astrophysics Data System (ADS)

    Bogatu, I. N.; Kim, J. S.; Egdell, D. H.; Snider, R. T.; Brooks, N. H.; Wade, M. R.; West, W. P.

    2001-01-01

    The injection of Ar into the region of the DIII-D divertor is a promising technique for energy dissipation (through radiation and collisions) and consequently for reduction of the heat load on the plates. An important problem related to this technique, is the inherent poisoning of the core plasma by migrating Ar. The Ar core contamination seems also to improve the thermal transport in an advanced operating mode of the tokamak. It is therefore of great importance to measure the evolution of the impurity concentration profile within the core plasma. This goal could be achieved by using the Ross filter method in conjunction with the existing x-ray diagnostics on DIII-D. A basic Ross filter system consists of two identical detectors placed behind two different x-ray absorbing foils looking at the same plasma volume. The foils are made of different elements or compounds with adjacent or nearly adjacent atomic numbers. Their accurate thickness causes the x-ray transmission curves of the two foils to be effectively identical over the entire energy range except within the narrow region between their absorption edges. Since the transmission characteristics of the foils above and below their absorption edges are the same, any difference in the two detected signals is proportional to the total x-ray power of the emission spectrum between these two edge energies. An x-ray Ross filter with its energy pass band centered on the Ar XVII Kα line at 3.14 keV has been designed. This allows for the discrimination of the Ar Kα line only, regardless of Ar ionization state, against any background radiation with energies outside the energy pass band. The Ross filter was installed in front of two of the fan shaped poloidal x-ray arrays on DIII-D. The first measurements showed very good discrimination against Ne, another injected impurity. Emissivity profile evolution of the Kα lines and Ar enhanced continuum within the energy pass band of the Ross filter can be determined from the x

  3. Abstract coherent categories.

    PubMed

    Rehder, B; Ross, B H

    2001-09-01

    Many studies have demonstrated the importance of the knowledge that interrelates features in people's mental representation of categories and that makes our conception of categories coherent. This article focuses on abstract coherent categories, coherent categories that are also abstract because they are defined by relations independently of any features. Four experiments demonstrate that abstract coherent categories are learned more easily than control categories with identical features and statistical structure, and also that participants induced an abstract representation of the category by granting category membership to exemplars with completely novel features. The authors argue that the human conceptual system is heavily populated with abstract coherent concepts, including conceptions of social groups, societal institutions, legal, political, and military scenarios, and many superordinate categories, such as classes of natural kinds. PMID:11550753

  4. Northern Illinois University Abstracts of Graduate Studies on the Community (Junior) College, 1968-1969.

    ERIC Educational Resources Information Center

    Northern Illinois Univ., De Kalb. Community Coll. Services.

    This document summarizes recent graduate studies (independent or for degree) on junior colleges. The topics examined were: general education requirements in three states; characteristics and attitudes of women students; student characteristics (five studies); self-concepts of selected students; socail studies curricula in three states; secretarial…

  5. RAD hard PROM design study

    NASA Technical Reports Server (NTRS)

    1981-01-01

    The results of a preliminary study on the design of a radiation hardened fusible link programmable read-only memory (PROM) are presented. Various fuse technologies and the effects of radiation on MOS integrated circuits are surveyed. A set of design rules allowing the fabrication of a radiation hardened PROM using a Si-gate CMOS process is defined. A preliminary cell layout was completed and the programming concept defined. A block diagram is used to describe the circuit components required for a 4 K design. A design goal data sheet giving target values for the AC, DC, and radiation parameters of the circuit is presented.

  6. Designing case-control studies.

    PubMed Central

    Yanagawa, T

    1979-01-01

    Identification of confounding factors, evaluation of their influence on cause-effect associations, and the introduction of appropriate ways to account for these factors are important considerations in designing case-control studies. This paper presents designs useful for these purposes, after first providing a statistical definition of a confounding factor. Differences in the ability to identify and evaluate confounding factors and estimate disease risk between designs employing stratification (matching) and designs randomly sampling cases and controls are noted. Linear logistic models for the analysis of data from such designs are described and are shown to liberalize design requirements and to increase relative risk estimation efficiency. The methods are applied to data from a multiple factor investigation of lung cancer patients and controls. PMID:540588

  7. Water reuse. [Lead abstract

    SciTech Connect

    Middlebrooks, E.J.

    1982-01-01

    Separate abstracts were prepared for the 31 chapters of this book which deals with all aspects of wastewater reuse. Design data, case histories, performance data, monitoring information, health information, social implications, legal and organizational structures, and background information needed to analyze the desirability of water reuse are presented. (KRM)

  8. Meeting Abstracts - Annual Meeting 2016.

    PubMed

    2016-04-01

    The AMCP Abstracts program provides a forum through which authors can share their insights and outcomes of advanced managed care practice through publication in AMCP's Journal of Managed Care & Specialty Pharmacy (JMCP). Most of the reviewed and unreviewed abstracts are presented as posters so that interested AMCP meeting attendees can review findings and query authors. The Student/Resident/ Fellow poster presentation (unreviewed) is Wednesday, April 20, 2016, and the Professional poster presentation (reviewed) is Thursday, April 21. The Professional posters will also be displayed on Friday, April 22. The reviewed abstracts are published in the JMCP Meeting Abstracts supplement. The AMCP Managed Care & Specialty Pharmacy Annual Meeting 2016 in San Francisco, California, is expected to attract more than 3,500 managed care pharmacists and other health care professionals who manage and evaluate drug therapies, develop and manage networks, and work with medical managers and information specialists to improve the care of all individuals enrolled in managed care programs. Abstracts were submitted in the following categories: Research Report: describe completed original research on managed care pharmacy services or health care interventions. Examples include (but are not limited to) observational studies using administrative claims, reports of the impact of unique benefit design strategies, and analyses of the effects of innovative administrative or clinical programs. Economic Model: describe models that predict the effect of various benefit design or clinical decisions on a population. For example, an economic model could be used to predict the budget impact of a new pharmaceutical product on a health care system. Solving Problems in Managed Care: describe the specific steps taken to introduce a needed change, develop and implement a new system or program, plan and organize an administrative function, or solve other types of problems in managed care settings. These

  9. Northern Illinois University Abstracts of Graduate Studies on the Community (Junior) College, 1969-1970.

    ERIC Educational Resources Information Center

    Northern Illinois Univ., De Kalb. Community Coll. Services.

    This is a summary of 30 recent graduate studies in terms of (1) problem statement, (2) procedure description, and (3) significant findings. Most of the studies deal with the junior college student, and include reading achievement levels and scholastic performance, achievement and retention effects of course load requirements, and attitudes toward…

  10. (abstract) The Design of a Benign Fail-safe Mechanism Using a Low-melting-point Metal Alloy Coupler

    NASA Technical Reports Server (NTRS)

    Blomquist, Richard S.

    1995-01-01

    Because the alpha proton X ray spectrometer (APXS) sensor head on the Mars Pathfinder rover, Sojourner, is placed on Martian soil by the deployment mechanism (ADM), the rover would be crippled if the actuator fails when the mechanism is in its deployed position, as rover ground clearance is then reduced to zero. This paper describes the unique fail-safe mounted on the ADM, especially the use of a low-temperature-melting alloy as a coupler device. The final form of the design is a low-melting-point metal pellet coupler, made from Cerrobend, in parallel with a Negator spring pack. In its solid state, the metal rigidly connects the driver (the actuator) and the driven part (the mechanism). When commanded, a strip heater wrapped around the coupler melts the metal pellet (at 60(deg)C), allowing the driven part to turn independent of the driver. The Negator spring retracts the mechanism to its fully stowed position. This concept meets all the design criteria, and provides an added benefit. When the metal hardens the coupler once again rigidly connects the actuator and the mechanism. The concept presented here can easily be applied to other applications. Anywhere release devices are needed, low-melting-point couplers can be considered. The issues to be concerned with are thermal isolation, proper setting of the parts before actuation, and possible outgassing concerns. However, when these issues are overcome, the resulting release mechanism can promise to be the most light, simple, power conserving alternative available.

  11. Mechanistic studies of the radical SAM enzyme 4-demethylwyosine synthase reveals the site of hydrogen atom abstraction

    PubMed Central

    Young, Anthony P.; Bandarian, Vahe

    2015-01-01

    TYW1 catalyzes the formation of 4-demethylwyosine via the condensation of N-methylguanosine (m1G) with carbons 2 and 3 of pyruvate. In this study labeled transfer ribonucleic acid (tRNA) and pyruvate were utilized to determine the site of hydrogen atom abstraction and regiochemistry of the pyruvate addition. tRNA containing a 2H labeled m1G methyl group was used to identify the methyl group of m1G as the site of hydrogen atom abstraction by S-adenosyl-L-methionine. [2-13C1,3,3,3-2H3]-Pyruvate was used to demonstrate retention of all the pyruvate protons indicating that C2 of pyruvate forms the bridging carbon of the imidazoline ring and C3 the methyl. PMID:26052987

  12. (abstract) Application of the GPS Worldwide Network in the Study of Global Ionospheric Storms

    NASA Technical Reports Server (NTRS)

    Ho, C. M.; Mannucci, A. J.; Lindqwister, U. J.; Pi, X.; Sparks, L. C.; Rao, A. M.; Wilsion, B. D.; Yuan, D. N.; Reyes, M.

    1997-01-01

    Ionospheric storm dynamics as a response to the geomagnetic storms is a very complicated global process involving many different mechanisms. Studying ionospheric storms will help us to understand the energy coupling process between the Sun and Earth and possibly also to effectively forecast space weather changes. Such a study requires a worldwide monitoring system. The worldwide GPS network, for the first time, makes near real-time global ionospheric TEC measurements a possibility.

  13. DS-OPTIMAL DESIGNS FOR STUDYING COMBINATIONS OF CHEMICALS USING MULTIPLE FIXED-RATIO RAY EXPERIMENTS

    EPA Science Inventory

    ABSTRACT

    Detecting and characterizing interactions among chemicals is an important environmental issue. Traditional factorial designs become infeasible as the number of compounds under study increases. Ray designs, which reduce the amount of experimental effort, can be...

  14. Student Project Work and Abstracts. Beaufort, North Carolina Environmental Studies Project, No. 2.

    ERIC Educational Resources Information Center

    Carteret County Board of Education, Beaufort, NC.

    This document contains reports of 11 environmental study projects conducted by junior and senior students in a North Carolina high school. Topics range from the construction of an artificial reef and a survey of seashore changes to surveys of past and present development of various facets of the county ecology. The emphasis is on student…

  15. FIELD-SCALE STUDIES: HOW DOES SOIL SAMPLE PRETREATMENT AFFECT REPRESENTATIVENESS ? (ABSTRACT)

    EPA Science Inventory

    Samples from field-scale studies are very heterogeneous and can contain large soil and rock particles. Oversize materials are often removed before chemical analysis of the soil samples because it is not practical to include these materials. Is the extracted sample representativ...

  16. SORPTION OF LEAD ON A HIGH AFFINITY OXIDE: MACROSCOPIC AND MICROSCOPIC STUDIES (ABSTRACT)

    EPA Science Inventory

    Sorption of lead (Pb) was investigated on an innovative metal oxide compound using macroscopic and microscopic techniques. The objective of this study was to elucidate the sorption mechanism of Pb on the high-affinity engineered oxide with time at pH 6 employing batch methods an...

  17. Analogical Scaffolding and the Learning of Abstract Ideas in Physics: Empirical Studies

    ERIC Educational Resources Information Center

    Podolefsky, Noah S.; Finkelstein, Noah D.

    2007-01-01

    Previously, we proposed a model of student reasoning which combines the roles of representation, analogy, and layering of meaning--analogical scaffolding [Podolefsky and Finkelstein, Phys. Rev. ST Phys. Educ. Res. 3, 010109 (2007)]. The present empirical studies build on this model to examine its utility and demonstrate the vital intertwining of…

  18. Fractured rock hydrogeology: Modeling studies. (Latest citations from the Selected Water Resources Abstracts database). Published Search

    SciTech Connect

    Not Available

    1993-07-01

    The bibliography contains citations concerning the use of mathematical and conceptual models in describing the hydraulic parameters of fluid flow in fractured rock. Topics include the use of tracers, solute and mass transport studies, and slug test analyses. The use of modeling techniques in injection well performance prediction is also discussed. (Contains 250 citations and includes a subject term index and title list.)

  19. Optical Telescope Design Study Results

    NASA Astrophysics Data System (ADS)

    Livas, J.; Sankar, S.

    2015-05-01

    We report on the results of a study conducted from Nov 2012-Apr 2013 to develop a telescope design for a space-based gravitational wave detector. The telescope is needed for efficient power delivery but since it is directly in the beam path, the design is driven by the requirements for the overall displacement sensitivity of the gravitational wave observatory. Two requirements in particular, optical pathlength stability and scattered light performance, are beyond the usual specifications for good image quality encountered in traditional telescopic systems. An important element of the study was to tap industrial expertise to develop an optimized design that can be reliably manufactured. Key engineering and design trade-offs and the sometimes surprising results will be presented.

  20. Software design studies emphasizing Project LOGOS

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The results of a research project on the development of computer software are presented. Research funds of $200,000 were expended over a three year period for software design and projects in connection with Project LOGOS (computer-aided design and certification of computing systems). Abstracts of theses prepared during the project are provided.

  1. Design of an undulator white beam profiler and test results on the Advanced Photon Source beamline (abstract)

    NASA Astrophysics Data System (ADS)

    Shu, Deming; Ramanathan, Mohan; Singh, Om; Decker, Glenn

    2002-03-01

    At the Advanced Photon Source (APS), each insertion device (ID) beamline front end has two x-ray beam position monitors (XBPMs) to monitor the x-ray beam position for both the vertical and horizontal directions. The XBPMs measure photoelectrons generated by the chemical vapor deposited-diamond-based sensory blades and deduce the beam position by comparison of the relative signals from the blades [D. Shu, B. Rodricks, J. Barraza, T. Sanchez, and T. M. Kuzay, Nucl. Instrum. Methods. Phys. Res. A 319, 56 (1992)]. Performance challenges for an undulator XBPM during operation are contamination of the signal from the neighboring bending-magnet sources and the sensitivity of the XBPM to the ID gap variations. Problems are exacerbated because users change the ID gap during their operations, and hence the percentage level of the contamination in the front-end XBPM signals varies. The smart XBPM system partially solved these problems [D. Shu, H. Ding, J. Barraza, T. M. Kuzay, and M. Ramanathan, J. Synchrotron Radia. 5, 632 (1998)], but it is still very difficult to eliminate the contamination of the signal from the storage ring orbit-corrector magnets. A method was proposed by G. Decker and O. Singh [Phys. Rev. ST Accel. Beams 2, 112801 (1999)] that provides a solution to the long-standing problem of stray radiation-induced signals on photoemission-based XBPMs located on the ID beamline front end. The method involves the introduction of a chicane into the accelerator lattice that directs unwanted x rays away from the photosensitive XBPM blades. This technique has been implemented at the APS. In this paper, we present the design of an undulator white beam profiler that provides experimental confirmation of this technique.

  2. Application of TFTR diagnostics to study of limiter H modes (abstract)

    NASA Astrophysics Data System (ADS)

    Bush, C. E.; Schivell, J.; Taylor, G.; Bretz, N.; Cavallo, A.; Fredrickson, E.; Janos, A.; Mansfield, D. K.; McGuire, K.; Nazikian, R.; Park, H.; Ramsey, A. T.; Stratton, B.; Synakowski, E. J.

    1990-10-01

    Circular limiter H modes with centrally peaked density profiles have been obtained on TFTR. Diagnostics used to study these unique plasmas include arrays of Dα and C ii detectors, bolometers, and Mirnov coils; x-ray imaging, charge exchange recombination spectroscopy, ECE, microwave scattering systems, and a multichannel infrared interferometer. These diagnostics have special features which allow time and space-resolved measurements during the H-mode transition and during ELMs. Microwave scattering during the H phase shows a feature in the scattered spectrum which is consistent with a poloidal rotation in the electron diamagnetic drift direction. Mirnov coil data digitized at 2 MHz show an increase in high-frequency magnetic fluctuations (60-200 kHz) during an ELM, while ECE data show 20-30 μs intense emission spikes in the outer 15-20 cm of the plasma edge.

  3. An ion microprobe study of CAIs from CO3 meteorites. [Abstract only

    NASA Technical Reports Server (NTRS)

    Russell, S. S.; Greenwood, R. C.; Fahey, A. J.; Huss, G. R.; Wasserburg, G. J.

    1994-01-01

    When attempting to interpret the history of Ca, Al-rich inclusions (CAIs) it is often difficult to distinguish between primary features inherited from the nebula and those produced during secondary processing on the parent body. We have undertaken a systematic study of CAIs from 10 CO chondrites, believed to represent a metamorphic sequence with the goal of distinguishing primary and secondary features. ALHA 77307 (3.0), Colony (3.0), Kainsaz (3.1), Felix (3.2), ALH 82101 (3.3), Ornans (3.3), Lance (3.4), ALHA 77003 (3.5), Warrenton (3.6), and Isna (3.7) were examined by Scanning Electron Microscopy (SEM) and optical microscopy. We have identified 141 CAIs within these samples, and studied in detail the petrology of 34 inclusions. The primary phases in the lower petrologic types are spinel, melilite, and hibonite. Perovskite, FeS, ilmenite, anorthite, kirschsteinite, and metallic Fe are present as minor phases. Melilite becomes less abundant in higher petrologic types and was not detected in chondrites of type 3.5 and above, confirming previous reports that this mineral easily breaks down during heating. Iron, an element that would not be expected to condense at high temperatures, has a lower abundance in spinel from low-petrologic-type meteorites than those of higher grade, and CaTiO3 is replaced by FeTiO3 in meteorites of higher petrologic type. The abundance of CAIs is similar in each meteorite. Eight inclusions have been analyzed by ion probe. The results are summarized. The results obtained to date show that CAIs in CO meteorites, like those from other meteorite classes, contain Mg* and that Mg in some inclusions has been redistributed.

  4. Equilibrium Studies of Designed Metalloproteins.

    PubMed

    Gibney, B R

    2016-01-01

    Complete thermodynamic descriptions of the interactions of cofactors with proteins via equilibrium studies are challenging, but are essential to the evaluation of designed metalloproteins. While decades of studies on protein-protein interaction thermodynamics provide a strong underpinning to the successful computational design of novel protein folds and de novo proteins with enzymatic activity, the corresponding paucity of data on metal-protein interaction thermodynamics limits the success of computational metalloprotein design efforts. By evaluating the thermodynamics of metal-protein interactions via equilibrium binding studies, protein unfolding free energy determinations, proton competition equilibria, and electrochemistry, a more robust basis for the computational design of metalloproteins may be provided. Our laboratory has shown that such studies provide detailed insight into the assembly and stability of designed metalloproteins, allow for parsing apart the free energy contributions of metal-ligand interactions from those of porphyrin-protein interactions in hemeproteins, and even reveal their mechanisms of proton-coupled electron transfer. Here, we highlight studies that reveal the complex interplay between the various equilibria that underlie metalloprotein assembly and stability and the utility of making these detailed measurements. PMID:27586343

  5. A study of sound transmission in an abstract middle ear using physical and finite element models.

    PubMed

    Gonzalez-Herrera, Antonio; Olson, Elizabeth S

    2015-11-01

    The classical picture of middle ear (ME) transmission has the tympanic membrane (TM) as a piston and the ME cavity as a vacuum. In reality, the TM moves in a complex multiphasic pattern and substantial pressure is radiated into the ME cavity by the motion of the TM. This study explores ME transmission with a simple model, using a tube terminated with a plastic membrane. Membrane motion was measured with a laser interferometer and pressure on both sides of the membrane with micro-sensors that could be positioned close to the membrane without disturbance. A finite element model of the system explored the experimental results. Both experimental and theoretical results show resonances that are in some cases primarily acoustical or mechanical and sometimes produced by coupled acousto-mechanics. The largest membrane motions were a result of the membrane's mechanical resonances. At these resonant frequencies, sound transmission through the system was larger with the membrane in place than it was when the membrane was absent. PMID:26627771

  6. Advances in Studies of Electrode Kinetics and Mass Transport in AMTEC Cells (abstract)

    NASA Technical Reports Server (NTRS)

    Williams, R. M.; Jeffries-Nakamura, B.; Ryan, M. A.; Underwood, M. L.; Kisor, A.; O'Connor, D.; Kikkert, S.

    1993-01-01

    Previous work reported from JPL has included characterization of electrode kinetics and alkali atom transport from electrodes including Mo, W, WRh(sub x), WPt(sub x)(Mn), in sodium AMTEC cells and vapor exposure cells, and Mo in potassium vapor exposure cells. These studies were generally performed in cells with small area electrodes (about 1 to 5 cm(sup 2)), and device geometry had little effect on transport. Alkali diffusion coefficients through these electrodes have been characterized, and approximate surface diffusion coefficients derived in cases of activated transport. A basic model of electrode kinetic at the alkali metal vapor/porous metal electrode/alkali beta'-alumina solid electrolyte three phase boundary has been proposed which accounts for electrochemical reaction rates with a collision frequency near the three phase boundary and tunneling from the porous electrode partially covered with adsorbed alkali metal atoms. The small electrode effect in AMTEC cells has been discussed in several papers, but quantitative investigations have described only the overall effect and the important contribution of electrolyte resistance. The quantitative characterization of transport losses in cells with large area electrodes has been limited to simulations of large area electrode effects, or characterization of transport losses from large area electrodes with significant longitudinal temperature gradients. This paper describes new investigations of electrochemical kinetics and transport, particularily with WPt(sub 3.5) electrodes, including the influence of electrode size on the mass transport loss in the AMTEC cell. These electrodes possess excellent sodium transport properties making verification of device limitations on transport much more readily attained.

  7. Studies into the use of waterborne coating formulations for the preparation of magnetic tape (abstract)

    NASA Astrophysics Data System (ADS)

    Barrom, Stacy; Bray, Ashley; Cheng, Song; Elike, John; Fan, Hong; Lane, Alan M.; Nikles, David E.

    1994-05-01

    The objective of this research project is to replace the organic solvents used in modern tape manufacture with water, thereby eliminating the potential for solvent emissions. This has led to a search to identify tape components compatible with a waterborne coating process. The pigments were either cobalt-modified γ-Fe2O3 or barium ferrite, with the majority of the research focused on cobalt-modified γ-Fe2O3 formulations. A combination of sodium polyphosphate and Surfynol CT-136, a pigment grinding aid, were used as dispersing agents. The binders included commercial water-dispersed polyurethanes and a commercial ethylene-vinylchloride copolymer emulsion. A commercial waterborne melamine-formaldehyde was used as a cross-linking agent. Addition of the ethylene-vinylchloride copolymer to the polyurethane increased the tensile strength and Young's modulus of the unpigmented binder films. The melamine-formaldehyde cross-linker further enhanced the mechanical properties and increased the adhesion between the pigmented binder films and the polyester base film. In a 180° peel test, the adhesion easily exceeded the ITO specification for 8 mm helical scan magnetic tape.1 Rheological studies of the waterborne dispersions revealed that the viscosity was too low. Hydroxyethylcellulose, a water soluble polymer, was added as a thickener and this gave rise to a desirable thixotropic behavior in the dispersion. Waterborne dispersions were cast onto polyester base film, oriented in a 2000 G longitudinal magnetic field, and cured in a convection oven at 60 °C. Magnetic hysteresis loops showed a squareness of 0.875 and a switching field distribution of 0.324 for films containing cobalt-modified γ-Fe2O3.

  8. Visual Design Principles: An Empirical Study of Design Lore

    ERIC Educational Resources Information Center

    Kimball, Miles A.

    2013-01-01

    Many books, designers, and design educators talk about visual design principles such as balance, contrast, and alignment, but with little consistency. This study uses empirical methods to explore the lore surrounding design principles. The study took the form of two stages: a quantitative literature review to determine what design principles are…

  9. Theoretical and kinetic study of the hydrogen atom abstraction reactions of unsaturated C6 methyl esters with hydroxyl radical

    NASA Astrophysics Data System (ADS)

    Wang, Quan-De; Ni, Zhong-Hai

    2016-04-01

    This work reports a systematic ab initio and chemical kinetic study of the rate constants for hydrogen atom abstraction reactions by hydroxyl radical (OH) on typical isomers of unsaturated C6 methyl esters at the CBS/QB3 level of theory. The high-pressure limit rate constants at different reaction sites for all the methyl esters in the temperature range from 500 to 2000 K are calculated via transition-state theory with the Wigner method for quantum tunneling effect and fitted to the modified three parameters Arrhenius expression using least-squares regression. Further, a branching ratio analysis for each reaction site has been performed.

  10. Factorial study of rain garden design for nitrogen removal

    EPA Science Inventory

    Abstract Nitrate (〖NO〗_3^--N ) removal studies in bioretention systems showed great variability in removal rates and in some cases 〖NO〗_3^--N was exported. A 3-way factorial design (2 x 2 x 4) was devised for eight outdoor un-vegetated rain gardens to evaluate the effects of ...

  11. PROSPECTIVE PREGNANCY STUDY DESIGNS FOR ASSESSING REPRODUCTIVE AND DEVELOPMENTAL TOXICANTS

    EPA Science Inventory

    Prospective Pregnancy Study Designs for Assessing Reproductive and Developmental Toxicants
    Germaine M. Buck,1 Courtney D. Johnson,1 Joseph Stanford,2 Anne Sweeney,3 Laura Schieve,4 John Rockett,5 Sherry G. Selevan,6 Steve Schrader 7

    Abstract
    The origin of successfu...

  12. A Comparison Study on the Rhetorical Moves of Abstracts in Published Research Articles and Master's Foreign-Language Theses

    ERIC Educational Resources Information Center

    Ren, Hongwei; Li, Yuying

    2011-01-01

    The abstract of research papers is one of the first things that a reader will read to determine the value of the research. A well-written abstract will surely promote the text attached to it more effectively. By examining the rhetorical moves in the abstracts of Chinese Master's English theses and published research articles in applied…

  13. Metacognition and abstract reasoning.

    PubMed

    Markovits, Henry; Thompson, Valerie A; Brisson, Janie

    2015-05-01

    The nature of people's meta-representations of deductive reasoning is critical to understanding how people control their own reasoning processes. We conducted two studies to examine whether people have a metacognitive representation of abstract validity and whether familiarity alone acts as a separate metacognitive cue. In Study 1, participants were asked to make a series of (1) abstract conditional inferences, (2) concrete conditional inferences with premises having many potential alternative antecedents and thus specifically conducive to the production of responses consistent with conditional logic, or (3) concrete problems with premises having relatively few potential alternative antecedents. Participants gave confidence ratings after each inference. Results show that confidence ratings were positively correlated with logical performance on abstract problems and concrete problems with many potential alternatives, but not with concrete problems with content less conducive to normative responses. Confidence ratings were higher with few alternatives than for abstract content. Study 2 used a generation of contrary-to-fact alternatives task to improve levels of abstract logical performance. The resulting increase in logical performance was mirrored by increases in mean confidence ratings. Results provide evidence for a metacognitive representation based on logical validity, and show that familiarity acts as a separate metacognitive cue. PMID:25416026

  14. Horn antenna design studies. Citations from the International Aerospace Abstract data base

    NASA Technical Reports Server (NTRS)

    Gallagher, M. K.

    1980-01-01

    These citations from the international literature describe the antenna radiation patterns, polarization characteristics, wave propagation, noise temperature, wave diffraction, and wideband communication of various horn antennas. This updated bibliography contains 217 citations, 63 of which are new entries to the previous edition.

  15. Liquid belt radiator design study

    NASA Technical Reports Server (NTRS)

    Teagan, W. P.; Fitzgerald, K. F.

    1986-01-01

    The Liquid Belt Radiator (LBR) is an advanced concept developed to meet the needs of anticipated future space missions. A previous study documented the advantages of this concept as a lightweight, easily deployable alternative to present day space heat rejection systems. The technical efforts associated with this study concentrate on refining the concept of the LBR as well as examining the issues of belt dynamics and potential application of the LBR to intermediate and high temperature heat rejection applications. A low temperature point design developed in previous work is updated assuming the use of diffusion pump oil, Santovac-6, as the heat transfer media. Additional analytical and design effort is directed toward determining the impact of interface heat exchanger, fluid bath sealing, and belt drive mechanism designs on system performance and mass. The updated design supports the earlier result by indicating a significant reduction in system specific system mass as compared to heat pipe or pumped fluid radiator concepts currently under consideration (1.3 kg/sq m versus 5 kg/sq m).

  16. Study/Experimental/Research Design: Much More Than Statistics

    PubMed Central

    Knight, Kenneth L.

    2010-01-01

    Abstract Context: The purpose of study, experimental, or research design in scientific manuscripts has changed significantly over the years. It has evolved from an explanation of the design of the experiment (ie, data gathering or acquisition) to an explanation of the statistical analysis. This practice makes “Methods” sections hard to read and understand. Objective: To clarify the difference between study design and statistical analysis, to show the advantages of a properly written study design on article comprehension, and to encourage authors to correctly describe study designs. Description: The role of study design is explored from the introduction of the concept by Fisher through modern-day scientists and the AMA Manual of Style. At one time, when experiments were simpler, the study design and statistical design were identical or very similar. With the complex research that is common today, which often includes manipulating variables to create new variables and the multiple (and different) analyses of a single data set, data collection is very different than statistical design. Thus, both a study design and a statistical design are necessary. Advantages: Scientific manuscripts will be much easier to read and comprehend. A proper experimental design serves as a road map to the study methods, helping readers to understand more clearly how the data were obtained and, therefore, assisting them in properly analyzing the results. PMID:20064054

  17. Integrating model abstraction into monitoring strategies

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study was designed and performed to investigate the opportunities and benefits of integrating model abstraction techniques into monitoring strategies. The study focused on future applications of modeling to contingency planning and management of potential and actual contaminant release sites wi...

  18. How to make a good animation: A grounded cognition model of how visual representation design affects the construction of abstract physics knowledge

    NASA Astrophysics Data System (ADS)

    Chen, Zhongzhou; Gladding, Gary

    2014-06-01

    Visual representations play a critical role in teaching physics. However, since we do not have a satisfactory understanding of how visual perception impacts the construction of abstract knowledge, most visual representations used in instructions are either created based on existing conventions or designed according to the instructor's intuition, which leads to a significant variance in their effectiveness. In this paper we propose a cognitive mechanism based on grounded cognition, suggesting that visual perception affects understanding by activating "perceptual symbols": the basic cognitive unit used by the brain to construct a concept. A good visual representation activates perceptual symbols that are essential for the construction of the represented concept, whereas a bad representation does the opposite. As a proof of concept, we conducted a clinical experiment in which participants received three different versions of a multimedia tutorial teaching the integral expression of electric potential. The three versions were only different by the details of the visual representation design, only one of which contained perceptual features that activate perceptual symbols essential for constructing the idea of "accumulation." On a following post-test, participants receiving this version of tutorial significantly outperformed those who received the other two versions of tutorials designed to mimic conventional visual representations used in classrooms.

  19. Annual Conference Abstracts

    ERIC Educational Resources Information Center

    Journal of Engineering Education, 1972

    1972-01-01

    Includes abstracts of papers presented at the 80th Annual Conference of the American Society for Engineering Education. The broad areas include aerospace, affiliate and associate member council, agricultural engineering, biomedical engineering, continuing engineering studies, chemical engineering, civil engineering, computers, cooperative…

  20. Warm gas TVC design study

    NASA Technical Reports Server (NTRS)

    Moorhead, S. B., Jr.

    1973-01-01

    A warm gas thrust vector control system was studied to optimize the injection geometry for a specific engine configuration, and an injection valve was designed capable of meeting the base line requirements. To optimize injection geometry, studies were made to determine the performance effects of varying injection location, angle, port size, and port configuration. Having minimized the injection flow rate required, a warm gas valve was designed to handle the required flow. A direct drive hydraulic servovalve capable of operating with highly contaminated hydraulic fluid was designed. The valve is sized to flow 15 gpm at 3000 psia and the direct drive feature is capable of applying a spool force of 200 pounds. The baseline requirements are the development of 6 deg of thrust vector control utilizing 2000 F (total temperature) gas for 180 seconds on a 1.37 million pound thrust engine burning LOX and RP-1 at a chamber pressure of 250 psia with a 155 inch long conical nozzle having a 68 inch diameter throat and a 153 inch diameter exit.

  1. Supersonic airplane study and design

    NASA Technical Reports Server (NTRS)

    Cheung, Samson

    1993-01-01

    A supersonic airplane creates shocks which coalesce and form a classical N-wave on the ground, forming a double bang noise termed sonic boom. A recent supersonic commercial transport (the Concorde) has a loud sonic boom (over 100 PLdB) and low aerodynamic performance (cruise lift-drag ratio 7). To enhance the U.S. market share in supersonic transport, an airframer's market risk for a low-boom airplane has to be reduced. Computational fluid dynamics (CFD) is used to design airplanes to meet the dual constraints of low sonic boom and high aerodynamic performance. During the past year, a research effort was focused on three main topics. The first was to use the existing design tools, developed in past years, to design one of the low-boom wind-tunnel configurations (Ames Model 3) for testing at Ames Research Center in April 1993. The second was to use a Navier-Stokes code (Overflow) to support the Oblique-All-Wing (OAW) study at Ames. The third was to study an optimization technique applied on a Haack-Adams body to reduce aerodynamic drag.

  2. Lunar astronomical observatories - Design studies

    NASA Technical Reports Server (NTRS)

    Johnson, Stewart W.; Burns, Jack O.; Chua, Koon Meng; Duric, Nebojsa; Gerstle, Walter H.

    1990-01-01

    The best location in the inner solar system for the grand observatories of the 21st century may be the moon. A multidisciplinary team including university students and faculty in engineering, astronomy, physics, and geology, and engineers from industry is investigating the moon as a site for astronomical observatories and is doing conceptual and preliminary designs for these future observatories. Studies encompass lunar facilities for radio astronomy and astronomy at optical, ultraviolet, and infrared wavelengths of the electromagnetic spectrum. Although there are significant engineering challenges in design and construction on the moon, the rewards for astronomy can be great, such as detection and study of earth-like planets orbiting nearby stars, and the task for engineers promises to stimulate advances in analysis and design, materials and structures, automation and robotics, foundations, and controls. Fabricating structures in the reduced-gravity environment of the moon will be easier than in the zero-gravity environment of earth orbit, as Apollo and space-shuttle missions have revealed. Construction of observatories on the moon can be adapted from techniques developed on the earth, with the advantage that the moon's weaker gravitational pull makes it possible to build larger devices than are practical on earth.

  3. Humor, abstraction, and disbelief.

    PubMed

    Hoicka, Elena; Jutsum, Sarah; Gattis, Merideth

    2008-09-01

    We investigated humor as a context for learning about abstraction and disbelief. More specifically, we investigated how parents support humor understanding during book sharing with their toddlers. In Study 1, a corpus analysis revealed that in books aimed at 1-to 2-year-olds, humor is found more often than other forms of doing the wrong thing including mistakes, pretense, lying, false beliefs, and metaphors. In Study 2, 20 parents read a book containing humorous and non-humorous pages to their 19-to 26-month-olds. Parents used a significantly higher percentage of high abstraction extra-textual utterances (ETUs) when reading the humorous pages. In Study 3, 41 parents read either a humorous or non-humorous book to their 18-to 24-month-olds. Parents reading the humorous book made significantly more ETUs coded for a specific form of high abstraction: those encouraging disbelief of prior utterances. Sharing humorous books thus increases toddlers' exposure to high abstraction and belief-based language. PMID:21585438

  4. Design Evolution Study - Aging Options

    SciTech Connect

    P. McDaniel

    2002-04-05

    The purpose of this study is to identify options and issues for aging commercial spent nuclear fuel received for disposal at the Yucca Mountain Mined Geologic Repository. Some early shipments of commercial spent nuclear fuel to the repository may be received with high-heat-output (younger) fuel assemblies that will need to be managed to meet thermal goals for emplacement. The capability to age as much as 40,000 metric tons of heavy metal of commercial spent nuclear he1 would provide more flexibility in the design to manage this younger fuel and to decouple waste receipt and waste emplacement. The following potential aging location options are evaluated: (1) Surface aging at four locations near the North Portal; (2) Subsurface aging in the permanent emplacement drifts; and (3) Subsurface aging in a new subsurface area. The following aging container options are evaluated: (1) Complete Waste Package; (2) Stainless Steel inner liner of the waste package; (3) Dual Purpose Canisters; (4) Multi-Purpose Canisters; and (5) New disposable canister for uncanistered commercial spent nuclear fuel. Each option is compared to a ''Base Case,'' which is the expected normal waste packaging process without aging. A Value Engineering approach is used to score each option against nine technical criteria and rank the options. Open issues with each of the options and suggested future actions are also presented. Costs for aging containers and aging locations are evaluated separately. Capital costs are developed for direct costs and distributable field costs. To the extent practical, unit costs are presented. Indirect costs, operating costs, and total system life cycle costs will be evaluated outside of this study. Three recommendations for aging commercial spent nuclear fuel--subsurface, surface, and combined surface and subsurface are presented for further review in the overall design re-evaluation effort. Options that were evaluated but not recommended are: subsurface aging in a new

  5. Abstracts of State Authorizing and Oversight Laws and Regulations. A Study of State Oversight in Postsecondary Education.

    ERIC Educational Resources Information Center

    Helliwell, Carolyn B.; And Others

    Herein are contained abstracts of state laws and regulations governing postsecondary education in three sectors: public, private degree-granting, and private nondegree-granting. With some exceptions, all obtainable statutes having the force of law are included. The statutes are arranged by state. Each abstract includes basic identifying data,…

  6. Thermochemical and kinetics studies of the CH3SH+S (3P) hydrogen abstraction and insertion reactions.

    PubMed

    Cardoso, Daniely V V; Cunha, Leonardo A; Spada, Rene F K; Ferrão, Luiz F A; Roberto-Neto, Orlando; Machado, Francisco B C

    2014-09-01

    Sulfur-containing molecules have a significant impact on atmosphere and biosphere. In this work we studied, from the point of view of electronic structure and chemical kinetics methods, the elementary reactions between a methanethiol molecule and a sulfur atom leading to hydrogen abstraction C-S bond cleavage (CH(3)SH+S; R1:→ CH(3)S+SH; R2: → CH(2)SH+SH; R3:→ CH(3)+HS(2)). The geometrical structures of the reactants, products, and saddle points for the three reaction paths were optimized using the BB1K method with the aug-cc-pV(T+d)Z basis set. The thermochemical properties were improved using single point coupled-cluster (CCSD(T)) calculations on the BB1K geometries followed by extrapolation to the complete basis set (CBS) limit. This methodology was previously applied and has given accurate values of thermochemical and kinetics properties when compared to benchmark calculations and experimental data. For each reaction, the thermal rate constants were calculated using the improved canonical variational theory (ICVT) including the zero-curvature (ICVT/ZCT) and small-curvature (ICVT/SCT) tunneling corrections. For comparison, the overall ICVT/SCT reaction rate constant at 300 K obtained with single-point CCSD(T)/CBS calculations for the CH(3)SH+S reaction is approximately 1400 times lower than the isovalent CH(3)SH+O reaction, obtained with CVT/SCT. The reaction path involving the hydrogen abstraction from the thiol group is the most important reactive path in all temperatures. PMID:25204585

  7. Design Issues in Transgender Studies.

    PubMed

    Hughes, James P; Emel, Lynda; Hanscom, Brett; Zangeneh, Sahar

    2016-08-15

    Transgender individuals constitute an important focus for HIV prevention, but studies in this population present some unique methodologic and operational challenges. We consider issues related to sampling, sample size, number of sites, and trial cost. We discuss relevant design issues for evaluating interventions in both HIV-negative and HIV-infected transgender populations, as well as a method for assessing the impact of an intervention on population HIV incidence. We find that HIV-endpoint studies of transgender individuals will likely require fewer participants but more sites and have higher operational costs than HIV prevention trials in other populations. Because any intervention targeted to transgender individuals will likely include antiretroviral drugs, small scale studies looking at potential interactions between antiretroviral therapy and hormone therapy are recommended. Finally, assessing the impact of an intervention targeted to transgender individuals will require better information on the contribution of such individuals to the population HIV incidence. PMID:27429191

  8. AEROSOL PARTICLE COLLECTOR DESIGN STUDY

    SciTech Connect

    Lee, S; Richard Dimenna, R

    2007-09-27

    A computational evaluation of a particle collector design was performed to evaluate the behavior of aerosol particles in a fast flowing gas stream. The objective of the work was to improve the collection efficiency of the device while maintaining a minimum specified air throughput, nominal collector size, and minimal power requirements. The impact of a range of parameters was considered subject to constraints on gas flow rate, overall collector dimensions, and power limitations. Potential improvements were identified, some of which have already been implemented. Other more complex changes were identified and are described here for further consideration. In addition, fruitful areas for further study are proposed.

  9. Study designs for dependent happenings.

    PubMed

    Halloran, M E; Struchiner, C J

    1991-09-01

    In 1916, Sir Ronald Ross defined "dependent happenings" as events where the number affected in a unit of time depends on the number already affected. That is, the incidence depends on the prevalence, a characteristic of many infectious diseases. Because of this dependence, interventions against infectious diseases can have not only direct protective effects for the person receiving an intervention, but also indirect effects resulting from changes in the intensity of transmission in the population. This paper develops the conceptual framework for four types of study designs that differentiate and account for direct and indirect effects of intervention programs in dependent happenings. PMID:1742381

  10. Abstract spatial reasoning as an autistic strength.

    PubMed

    Stevenson, Jennifer L; Gernsbacher, Morton Ann

    2013-01-01

    Autistic individuals typically excel on spatial tests that measure abstract reasoning, such as the Block Design subtest on intelligence test batteries and the Raven's Progressive Matrices nonverbal test of intelligence. Such well-replicated findings suggest that abstract spatial processing is a relative and perhaps absolute strength of autistic individuals. However, previous studies have not systematically varied reasoning level--concrete vs. abstract--and test domain--spatial vs. numerical vs. verbal, which the current study did. Autistic participants (N = 72) and non-autistic participants (N = 72) completed a battery of 12 tests that varied by reasoning level (concrete vs. abstract) and domain (spatial vs. numerical vs. verbal). Autistic participants outperformed non-autistic participants on abstract spatial tests. Non-autistic participants did not outperform autistic participants on any of the three domains (spatial, numerical, and verbal) or at either of the two reasoning levels (concrete and abstract), suggesting similarity in abilities between autistic and non-autistic individuals, with abstract spatial reasoning as an autistic strength. PMID:23533615

  11. Representing and Extracting Lung Cancer Study Metadata: Study Objective and Study Design

    PubMed Central

    Garcia-Gathright, Jean I.; Oh, Andrea; Abarca, Phillip A.; Han, Mary; Sago, William; Spiegel, Marshall L.; Wolf, Brian; Garon, Edward B.; Bui, Alex A.T.; Aberle, Denise R.

    2015-01-01

    This paper describes the information retrieval step in Casama (Contextualized Semantic Maps), a project that summarizes and contextualizes current research articles on driver mutations in non-small cell lung cancer. Casama’s representation of lung cancer studies aims to capture elements that will assist an end-user in retrieving studies and, importantly, judging their strength. This paper focuses on two types of study metadata: study objective and study design. 430 abstracts on EGFR and ALK mutations in lung cancer were annotated manually. Casama’s support vector machine (SVM) automatically classified the abstracts by study objective with as much as 129% higher F-scores compared to PubMed’s built-in filters. A second SVM classified the abstracts by epidemiological study design, suggesting strength of evidence at a more granular level than in previous work. The classification results and the top features determined by the classifiers suggest that this scheme would be generalizable to other mutations in lung cancer, as well as studies on driver mutations in other cancer domains. PMID:25618216

  12. Representing and extracting lung cancer study metadata: study objective and study design.

    PubMed

    Garcia-Gathright, Jean I; Oh, Andrea; Abarca, Phillip A; Han, Mary; Sago, William; Spiegel, Marshall L; Wolf, Brian; Garon, Edward B; Bui, Alex A T; Aberle, Denise R

    2015-03-01

    This paper describes the information retrieval step in Casama (Contextualized Semantic Maps), a project that summarizes and contextualizes current research papers on driver mutations in non-small cell lung cancer. Casama׳s representation of lung cancer studies aims to capture elements that will assist an end-user in retrieving studies and, importantly, judging their strength. This paper focuses on two types of study metadata: study objective and study design. 430 abstracts on EGFR and ALK mutations in lung cancer were annotated manually. Casama׳s support vector machine (SVM) automatically classified the abstracts by study objective with as much as 129% higher F-scores compared to PubMed׳s built-in filters. A second SVM classified the abstracts by epidemiological study design, suggesting strength of evidence at a more granular level than in previous work. The classification results and the top features determined by the classifiers suggest that this scheme would be generalizable to other mutations in lung cancer, as well as studies on driver mutations in other cancer domains. PMID:25618216

  13. MIUS community conceptual design study

    NASA Technical Reports Server (NTRS)

    Fulbright, B. E.

    1976-01-01

    The feasibility, practicality, and applicability of the modular integrated utility systems (MIUS) concept to a satellite new-community development with a population of approximately 100,000 were analyzed. Two MIUS design options, the 29-MIUS-unit (option 1) and the 8-MIUS-unit (option 2) facilities were considered. Each resulted in considerable resource savings when compared to a conventional utility system. Economic analyses indicated that the total cash outlay and operations and maintenance costs for these two options were considerably less than for a conventional system. Computer analyses performed in support of this study provided corroborative data for the study group. An environmental impact assessment was performed to determine whether the MIUS meets or will meet necessary environmental standards. The MIUS can provide improved efficiency in the conservation of natural resources while not adversely affecting the physical environment.

  14. A select bibliography with abstracts of reports related to Waste Isolation Pilot Plant geotechnical studies (1972--1990)

    SciTech Connect

    Powers, D.W.; Martin, M.L.

    1993-08-01

    This select bibliography contains 941 entries. Each bibliographic entry contains the citation of a report, conference paper, or journal article containing geotechnical information about the Waste Isolation Pilot Plant (WIPP). The entries cover the period from 1972, when investigation began for a WIPP Site in southeastern New Mexico, through December 1990. Each entry is followed by an abstract. If an abstract or suitable summary existed, it has been included; 316 abstracts were written for other documents. For some entries, an annotation has been provided to clarify the abstract, comment on the setting and significance of the document, or guide the reader to related reports. An index of key words/phrases is included for all entries.

  15. Piaget on Abstraction.

    ERIC Educational Resources Information Center

    Moessinger, Pierre; Poulin-Dubois, Diane

    1981-01-01

    Reviews and discusses Piaget's recent work on abstract reasoning. Piaget's distinction between empirical and reflective abstraction is presented; his hypotheses are considered to be metaphorical. (Author/DB)

  16. Integrated technology wing design study

    NASA Technical Reports Server (NTRS)

    Hays, A. P.; Beck, W. E.; Morita, W. H.; Penrose, B. J.; Skarshaug, R. E.; Wainfan, B. S.

    1984-01-01

    The technology development costs and associated benefits in applying advanced technology associated with the design of a new wing for a new or derivative trijet with a capacity for 350 passengers and maximum range of 8519 km, entering service in 1990 were studied. The areas of technology are: (1) airfoil technology; (2) planform parameters; (3) high lift; (4) pitch active control system; (5) all electric systems; (6) E to 3rd power propulsion; (7) airframe/propulsion integration; (8) graphite/epoxy composites; (9) advanced aluminum alloys; (10) titanium alloys; and (11) silicon carbide/aluminum composites. These technologies were applied to the reference aircraft configuration. Payoffs were determined for block fuel reductions and net value of technology. These technologies are ranked for the ratio of net value of technology (NVT) to technology development costs.

  17. Novel Compressor Blade Design Study

    NASA Astrophysics Data System (ADS)

    Srinivas, Abhay

    Jet engine efficiency goals are driving compressors to higher pressure ratios and engines to higher bypass ratios, each one driving to smaller cores. This is leading to larger tip gaps relative to the blade height. These larger relative tip clearances would negate some of the cycle improvements, and ways to mitigate this effect must be found. A novel split tip blade geometry has been created which helps improve the efficiency at large clearances while also improving operating range. Two identical blades are leaned in opposite directions starting at 85% span. They are cut at mid chord and the 2 halves then merged together so a split tip is created. The result is similar to the alula feathers on a soaring bird. The concept is that the split tip will energize the tip flow and increase range. For higher relative tip clearance, this will also improve efficiency. The 6th rotor of a highly loaded 10 stage machine was chosen as the baseline for this study. Three dimensional CFD simulations were performed using CD Adapco's Star-CCM+ at 5 clearances for the baseline and split tip geometry. The choking flow and stall margin of the split tip blade was higher than that of the baseline blade for all tip clearances. The pressure ratio of the novel blade was higher than that of the baseline blade near choke, but closer to stall it decreased. The sensitivity of peak efficiency to clearance was improved. At tight clearances of 0.62% of blade height, the maximum efficiency of the new design was less than the baseline blade, but as the tip clearance was increased above 2.5%, the maximum efficiency increased. Structural analysis was also performed to ascertain the feasibility of the design.

  18. Theoretical and kinetic study of the hydrogen atom abstraction reactions of esters with H(O.)2 radicals.

    PubMed

    Mendes, Jorge; Zhou, Chong-Wen; Curran, Henry J

    2013-12-27

    This work details an ab initio and chemical kinetic study of the hydrogen atom abstraction reactions by the hydroperoxyl radical (HȮ2) on the following esters: methyl ethanoate, methyl propanoate, methyl butanoate, methyl pentanoate, methyl isobutyrate, ethyl ethanoate, propyl ethanoate, and isopropyl ethanoate. Geometry optimizations and frequency calculations of all of the species involved, as well as the hindrance potential descriptions for reactants and transition states, have been performed with the Møller-Plesset (MP2) method using the 6-311G(d,p) basis set. A validation of all of the connections between transition states and local minima was performed by intrinsic reaction coordinate calculations. Electronic energies for all of the species are reported at the CCSD(T)/cc-pVTZ level of theory in kcal mol(-1) with the zero-point energy corrections. The CCSD(T)/CBS (extrapolated from CCSD(T)/cc-pVXZ, in which X = D, T, Q) was used for the reactions of methyl ethanoate + HȮ2 radicals as a benchmark in the electronic energy calculations. High-pressure limit rate constants, in the temperature range 500-2000 K, have been calculated for all of the reaction channels using conventional transition state theory with asymmetric Eckart tunneling corrections. The 1-D hindered rotor approximation has been used for the low frequency torsional modes in both reactants and transition states. The calculated individual and total rate constants are reported for all of the reaction channels in each reaction system. A branching ratio analysis for each reaction site has also been investigated for all of the esters studied in this work. PMID:24175616

  19. Optimal design for epidemiological studies subject to designed missingness.

    PubMed

    Morara, Michele; Ryan, Louise; Houseman, Andres; Strauss, Warren

    2007-12-01

    In large epidemiological studies, budgetary or logistical constraints will typically preclude study investigators from measuring all exposures, covariates and outcomes of interest on all study subjects. We develop a flexible theoretical framework that incorporates a number of familiar designs such as case control and cohort studies, as well as multistage sampling designs. Our framework also allows for designed missingness and includes the option for outcome dependent designs. Our formulation is based on maximum likelihood and generalizes well known results for inference with missing data to the multistage setting. A variety of techniques are applied to streamline the computation of the Hessian matrix for these designs, facilitating the development of an efficient software tool to implement a wide variety of designs. PMID:18080755

  20. The cerebral basis of mapping nonsymbolic numerical quantities onto abstract symbols: an fMRI training study.

    PubMed

    Lyons, Ian M; Ansari, Daniel

    2009-09-01

    Although significant insights into the neural basis of numerical and mathematical processing have been made, the neural processes that enable abstract symbols to become numerical remain largely unexplored in humans. In the present study, adult participants were trained to associate novel symbols with nonsymbolic numerical magnitudes (arrays of dots). Functional magnetic resonance imaging was used to examine the neural correlates of numerical comparison versus recognition of the novel symbols after each of two training stages. A left-lateralized fronto-parietal network, including the intraparietal sulcus, the precuneus, and the dorsal prefrontal cortex, was more active during numerical comparison than during perceptual recognition. In contrast, a network including bilateral temporal-occipital regions was more active during recognition than comparison. A whole-brain three-way interaction revealed that those individuals who had higher scores on a postscan numerical task (measuring their understanding of the global numerical organization of the novel symbols) exhibited increasing segregation between the two tasks in the bilateral intraparietal sulci as a function of increased training. Furthermore, whole-brain regression analysis showed that activity in the left intraparietal sulcus was systematically related to the effect of numerical distance on accuracy. These data provide converging evidence that parietal and left prefrontal cortices are involved in learning to map numerical quantities onto visual symbols. Only the parietal cortex, however, appeared systematically related to the degree to which individuals learned to associate novel symbols with their numerical referents. We conclude that the left parietal cortex, in particular, may play a central role in imbuing visual symbols with numerical meaning. PMID:18823231

  1. Understanding Why Things Happen: Case-Studies of Pupils Using an Abstract Picture Language to Represent the Nature of Changes.

    ERIC Educational Resources Information Center

    Stylianidou, Fani; Boohan, Richard

    1998-01-01

    Six 12-year-old students were followed during an eight-month course using "Energy and Change" curricular materials, which introduce ideas related to the Second Law of Thermodynamics through an abstract picture language. Concludes that students had higher levels of generalization in their explanations of physical, chemical, and biological change.…

  2. Concentrator enhanced solar arrays design study

    NASA Technical Reports Server (NTRS)

    Lott, D. R.

    1978-01-01

    The analysis and preliminary design of a 25 kW concentrator enhanced lightweight flexible solar array are presented. The study was organized into five major tasks: (1) assessment and specification of design requirements; (2) mechanical design; (3) electric design; (4) concentrator design; and (5) cost projection. The tasks were conducted in an iterative manner so as to best derive a baseline design selection. The objectives of the study are discussed and comparative configurations and mass data on the SEP (Solar Electric Propulsion) array design, concentrator design options and configuration/mass data on the selected concentrator enhanced solar array baseline design are presented. Design requirements supporting design analysis and detailed baseline design data are discussed. The results of the cost projection analysis and new technology are also discussed.

  3. The software IDA for investigation of asteroid dynamics and its use for study of some asteroid motion (Abstract)

    NASA Astrophysics Data System (ADS)

    Galushina, T.; Bykova, L.; Letner, O.; Baturin, A.

    2015-08-01

    This work is devoted to description of the application suite IDA that is designed for investigation of dynamics and probability orbital evolution of asteroids. IDA allows to predict asteroid motion, to reveal close encounters, possible collisions and orbital resonance with planets, to estimate impact probability, to demonstrate asteroid and planets motion on a computer screen and to solve some additional problems. The features of the suite are multifunctionality, high efficiency and a convenient interface. The application suite IDA consists of following subsystems: subsystem "Assol" which allows to study orbital evolution of the nominal orbit and to demonstrate the asteroid and planets motion on a computer screen; subsystem "Observations" which intended to asteroid orbit fitting to positional observations and construction of initial probability domain with non-linear methods; subsystem "Distribution" which developed for the visualization of distribution of observations along an asteroid orbit; subsystem "Clones ensemble" which allows to construct an initial probability domain with the linear method; subsystem "Evolution" which designed for the study of the orbital evolution of an ensemble of asteroid clones; subsystem "Megno" which intended to estimate of predictability time of asteroid motion by means of average MEGNO parameter. The results of the motion investigation of the asteroid 2012 MF7 are given to demonstrate use of the application suite. This object has nonzero collision probability with the Earth in 2046.

  4. Student-Designed River Study.

    ERIC Educational Resources Information Center

    Turkall, Sheila Florian

    1996-01-01

    Describes an integrated student-designed investigation in which students explore different aspects of the Chagrin River including the river ecosystem, velocity and average depth, river flooding, water quality, and economic and political factors. (JRH)

  5. A study of commuter airplane design optimization

    NASA Technical Reports Server (NTRS)

    Roskam, J.; Wyatt, R. D.; Griswold, D. A.; Hammer, J. L.

    1977-01-01

    Problems of commuter airplane configuration design were studied to affect a minimization of direct operating costs. Factors considered were the minimization of fuselage drag, methods of wing design, and the estimated drag of an airplane submerged in a propellor slipstream; all design criteria were studied under a set of fixed performance, mission, and stability constraints. Configuration design data were assembled for application by a computerized design methodology program similar to the NASA-Ames General Aviation Synthesis Program.

  6. Advanced Design Studies. Final report

    SciTech Connect

    Steiner, Don

    2012-12-01

    The ARIES-CS project was a multi-year multi-institutional project to assess the feasibility of a compact stellarator as a fusion power plant. The work herein describes efforts to help design one aspect of the device, the divertor, which is responsible for the removal of particle and heat flux from the system, acting as the first point of contact between the magnetically confined hot plasma and the outside world. Specifically, its location and topology are explored, extending previous work on the sub ject. An optimized design is determined for the thermal particle flux using a suite of 3D stellarator design codes which trace magnetic field lines from just inside the confined plasma edge to their strike points on divertor plates. These divertor plates are specified with a newly developed plate design code. It is found that a satisfactory thermal design exists which maintains the plate temperature and heat load distribution below tolerable engineering limits. The design is unique, including a toroidal taper on the outboard plates which was found to be important to our results. The maximum thermal heat flux for the final design was 3.61 M W/m2 and the maximum peaking factor was 10.3, below prescribed limits of 10 M W/m2 and 15.6, respectively. The median length of field lines reaching the plates is about 250 m and their average angle of inclination to the surface is 2 deg. Finally, an analysis of the fast alphas, resulting from fusion in the core, which escape the plasma was performed. A method is developed for obtaining the mapping from magnetic coordinates to real-space coordinates for the ARIES-CS. This allows the alpha exit locations to be identified in real space for the first time. These were then traced using the field line algorithm as well as a guiding center routine accounting for their mass, charge, and specific direction and energy. Results show that the current design is inadequate for accommodating the alpha heat flux, capturing at most 1/3 of lost alphas

  7. Vague Language in Conference Abstracts

    ERIC Educational Resources Information Center

    Cutting, Joan

    2012-01-01

    This study examined abstracts for a British Association for Applied Linguistics conference and a Sociolinguistics Symposium, to define the genre of conference abstracts in terms of vague language, specifically universal general nouns (e.g. people) and research general nouns (e.g. results), and to discover if the language used reflected the level…

  8. A study of the use of abstract types for the representation of engineering units in integration and test applications

    NASA Technical Reports Server (NTRS)

    Johnson, Charles S.

    1986-01-01

    Physical quantities using various units of measurement can be well represented in Ada by the use of abstract types. Computation involving these quantities (electric potential, mass, volume) can also automatically invoke the computation and checking of some of the implicitly associable attributes of measurements. Quantities can be held internally in SI units, transparently to the user, with automatic conversion. Through dimensional analysis, the type of the derived quantity resulting from a computation is known, thereby allowing dynamic checks of the equations used. The impact of the possible implementation of these techniques in integration and test applications is discussed. The overhead of computing and transporting measurement attributes is weighed against the advantages gained by their use. The construction of a run time interpreter using physical quantities in equations can be aided by the dynamic equation checks provided by dimensional analysis. The effects of high levels of abstraction on the generation and maintenance of software used in integration and test applications are also discussed.

  9. Annual Conference Abstracts

    ERIC Educational Resources Information Center

    Engineering Education, 1975

    1975-01-01

    Papers abstracted represent those submitted to the distribution center at the 83rd American Society for Engineering Education Convention. Abstracts are grouped under headings corresponding to the main topic of the paper. (Editor/CP)

  10. A channel simulator design study

    NASA Technical Reports Server (NTRS)

    Devito, D. M.; Goutmann, M. M.; Harper, R. C.

    1971-01-01

    A propagation path simulator was designed for the channel between a Tracking and Data Relay Satellite in geostationary orbit and a user spacecraft orbiting the earth at an altitude between 200 and 4000 kilometers. The simulator is required to duplicate the time varying parameters of the propagation channel.

  11. Preliminary aerosol generator design studies

    NASA Technical Reports Server (NTRS)

    Stampfer, J. F., Jr.

    1976-01-01

    The design and construction of a prototype vaporization generator for highly dispersed sodium chloride aerosols is described. The aerosol generating system is to be used in the Science Simulator of the Cloud Physics Laboratory Project and as part of the Cloud Physics Laboratory payload to be flown on the shuttle/spacelab.

  12. Abstraction and Consolidation

    ERIC Educational Resources Information Center

    Monaghan, John; Ozmantar, Mehmet Fatih

    2006-01-01

    The framework for this paper is a recently developed theory of abstraction in context. The paper reports on data collected from one student working on tasks concerned with absolute value functions. It examines the relationship between mathematical constructions and abstractions. It argues that an abstraction is a consolidated construction that can…

  13. Abstraction and Problem Reformulation

    NASA Technical Reports Server (NTRS)

    Giunchiglia, Fausto

    1992-01-01

    In work done jointly with Toby Walsh, the author has provided a sound theoretical foundation to the process of reasoning with abstraction (GW90c, GWS9, GW9Ob, GW90a). The notion of abstraction formalized in this work can be informally described as: (property 1), the process of mapping a representation of a problem, called (following historical convention (Sac74)) the 'ground' representation, onto a new representation, called the 'abstract' representation, which, (property 2) helps deal with the problem in the original search space by preserving certain desirable properties and (property 3) is simpler to handle as it is constructed from the ground representation by "throwing away details". One desirable property preserved by an abstraction is provability; often there is a relationship between provability in the ground representation and provability in the abstract representation. Another can be deduction or, possibly inconsistency. By 'throwing away details' we usually mean that the problem is described in a language with a smaller search space (for instance a propositional language or a language without variables) in which formulae of the abstract representation are obtained from the formulae of the ground representation by the use of some terminating rewriting technique. Often we require that the use of abstraction results in more efficient .reasoning. However, it might simply increase the number of facts asserted (eg. by allowing, in practice, the exploration of deeper search spaces or by implementing some form of learning). Among all abstractions, three very important classes have been identified. They relate the set of facts provable in the ground space to those provable in the abstract space. We call: TI abstractions all those abstractions where the abstractions of all the provable facts of the ground space are provable in the abstract space; TD abstractions all those abstractions wllere the 'unabstractions' of all the provable facts of the abstract space are

  14. Abstraction in mathematics.

    PubMed

    Ferrari, Pier Luigi

    2003-07-29

    Some current interpretations of abstraction in mathematical settings are examined from different perspectives, including history and learning. It is argued that abstraction is a complex concept and that it cannot be reduced to generalization or decontextualization only. In particular, the links between abstraction processes and the emergence of new objects are shown. The role that representations have in abstraction is discussed, taking into account both the historical and the educational perspectives. As languages play a major role in mathematics, some ideas from functional linguistics are applied to explain to what extent mathematical notations are to be considered abstract. Finally, abstraction is examined from the perspective of mathematics education, to show that the teaching ideas resulting from one-dimensional interpretations of abstraction have proved utterly unsuccessful. PMID:12903658

  15. Some design constraints required for the use of generic software in embedded systems: Packages which manage abstract dynamic structures without the need for garbage collection

    NASA Technical Reports Server (NTRS)

    Johnson, Charles S.

    1986-01-01

    The embedded systems running real-time applications, for which Ada was designed, require their own mechanisms for the management of dynamically allocated storage. There is a need for packages which manage their own internalo structures to control their deallocation as well, due to the performance implications of garbage collection by the KAPSE. This places a requirement upon the design of generic packages which manage generically structured private types built-up from application-defined input types. These kinds of generic packages should figure greatly in the development of lower-level software such as operating systems, schedulers, controllers, and device driver; and will manage structures such as queues, stacks, link-lists, files, and binary multary (hierarchical) trees. Controlled to prevent inadvertent de-designation of dynamic elements, which is implicit in the assignment operation A study was made of the use of limited private type, in solving the problems of controlling the accumulation of anonymous, detached objects in running systems. The use of deallocator prodecures for run-down of application-defined input types during deallocation operations during satellites.

  16. Theoretical study of the hydrogen abstraction of substituted phenols by nitrogen dioxide as a source of HONO.

    PubMed

    Shenghur, Abraham; Weber, Kevin H; Nguyen, Nhan D; Sontising, Watit; Tao, Fu-Ming

    2014-11-20

    The mild yet promiscuous reactions of nitrogen dioxide (NO2) and phenolic derivatives to produce nitrous acid (HONO) have been explored with density functional theory calculations. The reaction is found to occur via four distinct pathways with both proton coupled electron transfer (PCET) and hydrogen atom transfer (HAT) mechanisms available. While the parent reaction with phenol may not be significant in the gas phase, electron donating groups in the ortho and para positions facilitate the reduction of nitrogen dioxide by electronically stabilizing the product phenoxy radical. Hydrogen bonding groups in the ortho position may additionally stabilize the nascent resonantly stabilized radical product, thus enhancing the reaction. Catechol (ortho-hydroxy phenol) has a predicted overall free energy change ΔG(0) = -0.8 kcal mol(-1) and electronic activation energy Ea = 7.0 kcal mol(-1). Free amines at the ortho and para positions have ΔG(0) = -3.8 and -1.5 kcal mol(-1); Ea = 2.3 and 2.1 kcal mol(-1), respectively. The results indicate that the hydrogen abstraction reactions of these substituted phenols by NO2 are fast and spontaneous. Hammett constants produce a linear correlation with bond dissociation energy (BDE) demonstrating that the BDE is the main parameter controlling the dark abstraction reaction. The implications for atmospheric chemistry and ground-level nitrous acid production are discussed. PMID:25325182

  17. The Effectiveness of Education and Schooling Activities with Respect to Learning Styles on the Learning of Abstract and Tangible Concepts of Social Studies by Students

    ERIC Educational Resources Information Center

    Seker, Mustafa

    2013-01-01

    This research reviews the effects of education and schooling activities that are conducted with respect to different learning styles on the success of teaching abstract and tangible concepts of 6th Grade Social Studies, and researches whether the demographic variables (age, gender) of the students had any effect on this success levels. To do so, 2…

  18. Education and Training that Meets the Needs of Small Business: List of 198 Studies with Abstracts and Reasons for Exclusion. Support Document

    ERIC Educational Resources Information Center

    Dawe, Susan; Naidu, Radhika; Harris, Lee-Ann

    2007-01-01

    This document lists 198 studies with abstracts and reasons for exclusion in support of the main report, "Education and Training that Meets the Needs of Small Business: A Systematic Review of Research" (ED499699). [This work has been produced with funding provided through the Australian Department of Education, Science and Training. For a related…

  19. Loving Those Abstracts

    ERIC Educational Resources Information Center

    Stevens, Lori

    2004-01-01

    The author describes a lesson she did on abstract art with her high school art classes. She passed out a required step-by-step outline of the project process. She asked each of them to look at abstract art. They were to list five or six abstract artists they thought were interesting, narrow their list down to the one most personally intriguing,…

  20. Critical Studies in Art and Design Education.

    ERIC Educational Resources Information Center

    Thistlewood, David, Ed.

    This book brings together British and U.S. contributions to the debate of a critical studies approach to art and design education. The approach links practice and appreciation. But critical differences exist in definitions of the term design, with the U.S. recognition of design as the use of principles and elements of art in works and a British…

  1. Vehicle systems design optimization study

    SciTech Connect

    Gilmour, J. L.

    1980-04-01

    The optimization of an electric vehicle layout requires a weight distribution in the range of 53/47 to 62/38 in order to assure dynamic handling characteristics comparable to current production internal combustion engine vehicles. It is possible to achieve this goal and also provide passenger and cargo space comparable to a selected current production sub-compact car either in a unique new design or by utilizing the production vehicle as a base. Necessary modification of the base vehicle can be accomplished without major modification of the structure or running gear. As long as batteries are as heavy and require as much space as they currently do, they must be divided into two packages - one at front under the hood and a second at the rear under the cargo area - in order to achieve the desired weight distribution. The weight distribution criteria requires the placement of batteries at the front of the vehicle even when the central tunnel is used for the location of some batteries. The optimum layout has a front motor and front wheel drive. This configuration provides the optimum vehicle dynamic handling characteristics and the maximum passsenger and cargo space for a given size vehicle.

  2. Recycler ring conceptual design study

    SciTech Connect

    Jackson, G.

    1995-07-18

    The Tevatron Collider provides the highest center of mass energy collisions in the world. To fully exploit this unique tool, Fermilab is committed to a program of accelerator upgrades for the purpose of increasing the Collider luminosity. Over the past 7 years the luminosity has been increased from a peak of 1.6{times}10{sup 30}cm{sup {minus}2}sec{sup {minus}1} in 1989 to over 3{times}10{sup 31}cm{sup {minus}2}sec{sup {minus}1} during 1995. The Main Injector will supply a larger flux of protons for antiproton production and more intense proton bunches for use in the Collider, and this is expected to increase the peak luminosity to close to 1{times}10{sup 32}cm{sup {minus}2}sec{sup {minus}1}. Further increases in luminosity will require additional upgrades to the Fermilab accelerator complex. This report documents the design of a new fixed-energy storage ring to be placed in the Main Injector tunnel which will provide an initial factor of 2 increase to 2{times}10{sup 32}cm{sup {minus}2}sec{sup {minus}1}, and ultimately provide the basis for an additional order of magnitude luminosity increase up to 1{times}10{sup 33}cm{sup {minus}2}sec{sup {minus}1}.

  3. Interval Management Display Design Study

    NASA Technical Reports Server (NTRS)

    Baxley, Brian T.; Beyer, Timothy M.; Cooke, Stuart D.; Grant, Karlus A.

    2014-01-01

    In 2012, the Federal Aviation Administration (FAA) estimated that U.S. commercial air carriers moved 736.7 million passengers over 822.3 billion revenue-passenger miles. The FAA also forecasts, in that same report, an average annual increase in passenger traffic of 2.2 percent per year for the next 20 years, which approximates to one-and-a-half times the number of today's aircraft operations and passengers by the year 2033. If airspace capacity and throughput remain unchanged, then flight delays will increase, particularly at those airports already operating near or at capacity. Therefore it is critical to create new and improved technologies, communications, and procedures to be used by air traffic controllers and pilots. National Aeronautics and Space Administration (NASA), the FAA, and the aviation industry are working together to improve the efficiency of the National Airspace System and the cost to operate in it in several ways, one of which is through the creation of the Next Generation Air Transportation System (NextGen). NextGen is intended to provide airspace users with more precise information about traffic, routing, and weather, as well as improve the control mechanisms within the air traffic system. NASA's Air Traffic Management Technology Demonstration-1 (ATD-1) Project is designed to contribute to the goals of NextGen, and accomplishes this by integrating three NASA technologies to enable fuel-efficient arrival operations into high-density airports. The three NASA technologies and procedures combined in the ATD-1 concept are advanced arrival scheduling, controller decision support tools, and aircraft avionics to enable multiple time deconflicted and fuel efficient arrival streams in high-density terminal airspace.

  4. User Studies and Systems Design: Bridging the Gap (SIGs USE, HCI).

    ERIC Educational Resources Information Center

    Robins, David

    2000-01-01

    Presents an abstract for a planned session on the need to coordinate user studies and information retrieval system design research. Topics include human-based research and system-based research; children's information use; usability and cartographic information systems; and ethnomethodology and system design. Panelists included: Nick Belkin, Dania…

  5. Principles of study design in environmental epidemiology.

    PubMed Central

    Morgenstern, H; Thomas, D

    1993-01-01

    This paper discusses the principles of study design and related methodologic issues in environmental epidemiology. Emphasis is given to studies aimed at evaluating causal hypotheses regarding exposures to suspected health hazards. Following background sections on the quantitative objectives and methods of population-based research, we present the major types of observational designs used in environmental epidemiology: first, the three basic designs involving the individual as the unit of analysis (i.e., cohort, cross-sectional, and case-control studies) and a brief discussion of genetic studies for assessing gene-environment interactions; second, various ecologic designs involving the group or region as the unit of analysis. Ecologic designs are given special emphasis in this paper because of our lack of resources or inability to accurately measure environmental exposures in large numbers of individuals. The paper concludes with a section highlighting current design issues in environmental epidemiology and several recommendations for future work. PMID:8206038

  6. Leadership Abstracts, Volume 10.

    ERIC Educational Resources Information Center

    Milliron, Mark D., Ed.

    1997-01-01

    The abstracts in this series provide brief discussions of issues related to leadership, administration, professional development, technology, and education in community colleges. Volume 10 for 1997 contains the following 12 abstracts: (1) "On Community College Renewal" (Nathan L. Hodges and Mark D. Milliron); (2) "The Community College Niche in a…

  7. Has Abstractness Been Resolved?

    ERIC Educational Resources Information Center

    Al-Omoush, Ahmad

    1989-01-01

    A discussion focusing on the abstractness of analysis in phonology, debated since the 1960s, describes the issue, reviews the literature on the subject, cites specific natural language examples, and examines the extent to which the issue has been resolved. An underlying representation is said to be abstract if it is different from the derived one,…

  8. Knowledge-Based Abstracting.

    ERIC Educational Resources Information Center

    Black, William J.

    1990-01-01

    Discussion of automatic abstracting of technical papers focuses on a knowledge-based method that uses two sets of rules. Topics discussed include anaphora; text structure and discourse; abstracting techniques, including the keyword method and the indicator phrase method; and tools for text skimming. (27 references) (LRW)

  9. Leadership Abstracts, 1995.

    ERIC Educational Resources Information Center

    Johnson, Larry, Ed.

    1995-01-01

    The abstracts in this series provide two-page discussions of issues related to leadership, administration, and teaching in community colleges. The 12 abstracts for Volume 8, 1995, are: (1) "Redesigning the System To Meet the Workforce Training Needs of the Nation," by Larry Warford; (2) "The College President, the Board, and the Board Chair: A…

  10. Is It Really Abstract?

    ERIC Educational Resources Information Center

    Kernan, Christine

    2011-01-01

    For this author, one of the most enjoyable aspects of teaching elementary art is the willingness of students to embrace the different styles of art introduced to them. In this article, she describes a project that allows upper-elementary students to learn about abstract art and the lives of some of the master abstract artists, implement the idea…

  11. Journalism Abstracts. Vol. 15.

    ERIC Educational Resources Information Center

    Popovich, Mark N., Ed.

    This book, the fifteenth volume of an annual publication, contains 373 abstracts of 52 doctoral and 321 master's theses from 50 colleges and universities. The abstracts are arranged alphabetically by author, with the doctoral dissertations appearing first. These cover such topics as advertising, audience analysis, content analysis of news issues…

  12. Leadership Abstracts, 1996.

    ERIC Educational Resources Information Center

    Johnson, Larry, Ed.

    1996-01-01

    The abstracts in this series provide two-page discussions of issues related to leadership, administration, professional development, technology, and education in community colleges. Volume 9 for 1996 includes the following 12 abstracts: (1) "Tech-Prep + School-To-Work: Working Together To Foster Educational Reform," (Roderick F. Beaumont); (2)…

  13. Mathematical Abstraction through Scaffolding

    ERIC Educational Resources Information Center

    Ozmantar, Mehmet Fatih; Roper, Tom

    2004-01-01

    This paper examines the role of scaffolding in the process of abstraction. An activity-theoretic approach to abstraction in context is taken. This examination is carried out with reference to verbal protocols of two 17 year-old students working together on a task connected to sketching the graph of |f|x|)|. Examination of the data suggests that…

  14. Theoretical study of the rate constants for the hydrogen atom abstraction reactions of esters with (•)OH radicals.

    PubMed

    Mendes, Jorge; Zhou, Chong-Wen; Curran, Henry J

    2014-07-10

    A systematic investigation of the rate constants for hydrogen atom abstraction reactions by hydroxyl radicals on esters has been performed. The geometry optimizations and frequency calculations were obtained using the second-order Møller-Plesset method with the 6-311G(d,p) basis set. The same method was also used in order to determine the dihedral angle potential for each individual hindered rotor in each reactant and transition state. Intrinsic reaction coordinate calculations were used in order to connect each transition state to the corresponding local minimum. For the reactions of methyl ethanoate with an (•)OH radical, the relative electronic energies were calculated using the G3 and the CCSD(T)/cc-pVXZ (where X = D, T, and Q) methods, which were extrapolated to the complete basis set (CBS) limit. The electronic energies obtained using the G3 method were then benchmarked against the CBS results and were found to be within 1 kcal mol(-1) of one another. The high-pressure limit rate constants for every reaction channel were calculated by conventional transition-state theory, with an asymmetric Eckart tunneling correction, using the energies obtained with the G3 method. We report the individual, average, and total rate constants in the temperature range from 500 to 2200 K. Our calculated results are within a factor of 2 for methyl ethanoate and between 40% to 50% for methyl propanoate and methyl butanoate when compared to previously reported experimental data. PMID:24878337

  15. Abstract Datatypes in PVS

    NASA Technical Reports Server (NTRS)

    Owre, Sam; Shankar, Natarajan

    1997-01-01

    PVS (Prototype Verification System) is a general-purpose environment for developing specifications and proofs. This document deals primarily with the abstract datatype mechanism in PVS which generates theories containing axioms and definitions for a class of recursive datatypes. The concepts underlying the abstract datatype mechanism are illustrated using ordered binary trees as an example. Binary trees are described by a PVS abstract datatype that is parametric in its value type. The type of ordered binary trees is then presented as a subtype of binary trees where the ordering relation is also taken as a parameter. We define the operations of inserting an element into, and searching for an element in an ordered binary tree; the bulk of the report is devoted to PVS proofs of some useful properties of these operations. These proofs illustrate various approaches to proving properties of abstract datatype operations. They also describe the built-in capabilities of the PVS proof checker for simplifying abstract datatype expressions.

  16. Lunar NTR vehicle design and operations study

    NASA Technical Reports Server (NTRS)

    Hodge, John

    1993-01-01

    The results of a lunar nuclear thermal rocket (NTR) vehicle design and operations study are presented in text and graphic form. The objectives of the study were to evaluate the potential applications of a specific NTR design to past and current (First Lunar Outpost) mission profiles for piloted and cargo lunar missions, and to assess the applicability of utilizing lunar vehicle design concepts for Mars missions.

  17. Mobile Variable Depth Sampling System Design Study

    SciTech Connect

    BOGER, R.M.

    2000-08-25

    A design study is presented for a mobile, variable depth sampling system (MVDSS) that will support the treatment and immobilization of Hanford LAW and HLW. The sampler can be deployed in a 4-inch tank riser and has a design that is based on requirements identified in the Level 2 Specification (latest revision). The waste feed sequence for the MVDSS is based on Phase 1, Case 3S6 waste feed sequence. Technical information is also presented that supports the design study.

  18. On the Science of Education Design Studies.

    ERIC Educational Resources Information Center

    Shavelson, Richard J.; Phillips, D. C.; Towne, Lisa; Feuer, Michael J.

    2003-01-01

    Asserts that design studies, like all scientific work, must comport with guiding scientific principles and provide adequate warrants for their knowledge claims. Provides a framework that links design study research questions as they evolve over time with corresponding research methods, thus allowing an integration of research methods focused on…

  19. Experimental and Theoretical Study of Reactions of OH Radicals with Hexenols: An Evaluation of the Relative Importance of the H-Abstraction Reaction Channel.

    PubMed

    Gai, Yanbo; Lin, Xiaoxiao; Ma, Qiao; Hu, Changjin; Gu, Xuejun; Zhao, Weixiong; Fang, Bo; Zhang, Weijun; Long, Bo; Long, Zhengwen

    2015-09-01

    C6 hexenols are one of the most significant groups of volatile organic compounds with biogenic emissions. The lack of corresponding kinetic parameters and product information on their oxidation reactions will result in incomplete atmospheric chemical mechanisms and models. In this paper, experimental and theoretical studies are reported for the reactions of OH radicals with a series of C6 hexenols, (Z)-2-hexen-1-ol, (Z)-3-hexen-1-ol, (Z)-4-hexen-1-ol, (E)-2-hexen-1-ol, (E)-3-hexen-1-ol, and (E)-4-hexen-1-ol, at 298 K and 1.01 × 10(5) Pa. The corresponding rate constants were 8.53 ± 1.36, 10.1 ± 1.6, 7.86 ± 1.30, 8.08 ± 1.33, 9.10 ± 1.50, and 7.14 ± 1.20 (in units of 10(-11) cm(3) molecule(-1) s(-1)), respectively, measured by gas chromatography with a flame ionization detector (GC-FID), using a relative technique. Theoretical calculations concerning the OH-addition and H-abstraction reaction channels were also performed for these reactions to further understand the reaction mechanism and the relative importance of the H-abstraction reaction. By contrast to previously reported results, the H-abstraction channel is a non-negligible reaction channel for reactions of OH radicals with these hexenols. The rate constants of the H-abstraction channel are comparable with those for the OH-addition channel and contribute >20% for most of the studied alcohols, even >50% for (E)-3-hexen-1-ol. Thus, H-abstraction channels may have an important role in the reactions of these alcohols with OH radicals and must be considered in certain atmospheric chemical mechanisms and models. PMID:26274814

  20. Bilingual, Bicultural, and Bidialectal Studies Related to Reading and Communication Skills: Abstracts of Doctoral Dissertations Published in "Dissertation Abstracts International," January through June 1980 (Vol. 40 Nos. 7 through 12).

    ERIC Educational Resources Information Center

    ERIC Clearinghouse on Reading and Communication Skills, Urbana, IL.

    This collection of abstracts is part of a continuing series providing information on recent doctoral dissertations. The 29 titles deal with a variety of topics, including the following: (1) the language in a Spanish bilingual reading classroom; (2) the early stages of language acquisition of black children; (3) the dependency relation between oral…

  1. Bilingual, Bicultural, and Bidialectal Studies Related to Reading and Communication Skills: Abstracts of Doctoral Dissertations Published in "Dissertation Abstracts International," July through December 1981 (Vol. 42 Nos. 1 through 6).

    ERIC Educational Resources Information Center

    ERIC Clearinghouse on Reading and Communication Skills, Urbana, IL.

    This collection of abstracts is part of a continuing series providing information on recent doctoral dissertations. The 17 titles deal with a variety of topics, including the following: (1) the communicative competence of teenage boys in a northern United States urban warren; (2) the effects of second language learning upon reading achievement in…

  2. Bilingual, Bicultural, and Bidialectal Studies Related to Reading and Communication Skills: Abstracts of Doctoral Dissertations Published in "Dissertation Abstracts International," November 1978 through June 1979 (Vol. 39 Nos. 5 through 12).

    ERIC Educational Resources Information Center

    ERIC Clearinghouse on Reading and Communication Skills, Urbana, IL.

    This collection of abstracts is part of a continuing series providing information on recent doctoral dissertations. The 21 titles deal with the following topics: the language, communicative styles, and speech patterns of blacks and non-blacks; the prereading concept acquisition of Spanish-dominant kindergarten children; the self-concept and…

  3. Bilingual, Bicultural, and Bidialectal Studies Related to Reading and Communication Skills: Abstracts of Doctoral Dissertations Published in "Dissertation Abstracts International," January through April 1978 (Vol. 38 Nos. 7 through 10).

    ERIC Educational Resources Information Center

    ERIC Clearinghouse on Reading and Communication Skills, Urbana, IL.

    This collection of abstracts is part of a continuing series providing information on recent doctoral dissertations. The 12 titles deal with the following topics: the acquisition of bilingualism by infants and young children; psycholinguistic abilities of American Indian children; effects of creative dramatics on oral language abilities and self…

  4. Abstractions of Awareness: Aware of What?

    NASA Astrophysics Data System (ADS)

    Metaxas, Georgios; Markopoulos, Panos

    This chapter presents FN-AAR, an abstract model of awareness systems. The purpose of the model is to capture in a concise and abstract form essential aspects of awareness systems, many of which have been discussed in design essays or in the context of evaluating specific design solutions.

  5. [Choosing study design in urologic research].

    PubMed

    Barreales Tolosa, Laura; Mato Chaín, Gloria; Mariano Lázaro, Alberto; Fernández Pérez, Cristina; Rodríguez Caravaca, Gil; Fereres Castiel, José

    2003-01-01

    The design of an epidemiological study includes the procedures, methods and techniques by which the researcher tries to obtain valid (avoiding systematic errors or bias) and precise (avoiding random errors) answers to the research question posed. This principal question aimed to be answered is the specific objective of the study, which guides the election of an adequate type of design. The objective of this article is to describe the classification criteria (finality, temporal sequence, directionality, and control of the assignation of different study factors) of the different types of epidemiological studies (experimental, almost-experimental, and observational) and the main advantages, disadvantages, utilities and objectives of each investigation design. PMID:12958995

  6. Designing with Ada for satellite simulation: A case study

    NASA Technical Reports Server (NTRS)

    Agresti, W. W.; Church, V. E.; Card, D. N.; Lo, P. L.

    1986-01-01

    A FORTRAN oriented and an Ada oriented design for the same system are compared to learn whether an essentially different design was produced using Ada. The designs were produced by an experiment that involves the parallel development of software for a spacecraft dynamics simulator. Design differences are identified in the use of abstractions, system structure, and simulator operations. Although the designs were vastly different, this result may be influenced by some special characteristics discussed.

  7. Designing with Ada for satellite simulation: A case study

    NASA Technical Reports Server (NTRS)

    Agresti, William W.; Church, Victor E.; Card, David N.; Lo, P. L.

    1986-01-01

    A FORTRAN-operated and an Ada-oriented design for the same system are compared to learn whether an essentially different design was produced using Ada. The designs were produced by an experiment that involves the parallel development of software for a spacecraft dynamics simulator. Design differences are identified in the use of abstractions, system structure, and simulator operations. Although the designs were significantly different, this result may be influenced by some special characteristics discussed.

  8. Automatic Abstraction in Planning

    NASA Technical Reports Server (NTRS)

    Christensen, J.

    1991-01-01

    Traditionally, abstraction in planning has been accomplished by either state abstraction or operator abstraction, neither of which has been fully automatic. We present a new method, predicate relaxation, for automatically performing state abstraction. PABLO, a nonlinear hierarchical planner, implements predicate relaxation. Theoretical, as well as empirical results are presented which demonstrate the potential advantages of using predicate relaxation in planning. We also present a new definition of hierarchical operators that allows us to guarantee a limited form of completeness. This new definition is shown to be, in some ways, more flexible than previous definitions of hierarchical operators. Finally, a Classical Truth Criterion is presented that is proven to be sound and complete for a planning formalism that is general enough to include most classical planning formalisms that are based on the STRIPS assumption.

  9. 2016 ACPA MEETING ABSTRACTS.

    PubMed

    2016-07-01

    The peer-reviewed abstracts presented at the 73rd Annual Meeting of the ACPA are published as submitted by the authors. For financial conflict of interest disclosure, please visit http://meeting.acpa-cpf.org/disclosures.html. PMID:27447885

  10. ACSYNT inner loop flight control design study

    NASA Technical Reports Server (NTRS)

    Bortins, Richard; Sorensen, John A.

    1993-01-01

    The NASA Ames Research Center developed the Aircraft Synthesis (ACSYNT) computer program to synthesize conceptual future aircraft designs and to evaluate critical performance metrics early in the design process before significant resources are committed and cost decisions made. ACSYNT uses steady-state performance metrics, such as aircraft range, payload, and fuel consumption, and static performance metrics, such as the control authority required for the takeoff rotation and for landing with an engine out, to evaluate conceptual aircraft designs. It can also optimize designs with respect to selected criteria and constraints. Many modern aircraft have stability provided by the flight control system rather than by the airframe. This may allow the aircraft designer to increase combat agility, or decrease trim drag, for increased range and payload. This strategy requires concurrent design of the airframe and the flight control system, making trade-offs of performance and dynamics during the earliest stages of design. ACSYNT presently lacks means to implement flight control system designs but research is being done to add methods for predicting rotational degrees of freedom and control effector performance. A software module to compute and analyze the dynamics of the aircraft and to compute feedback gains and analyze closed loop dynamics is required. The data gained from these analyses can then be fed back to the aircraft design process so that the effects of the flight control system and the airframe on aircraft performance can be included as design metrics. This report presents results of a feasibility study and the initial design work to add an inner loop flight control system (ILFCS) design capability to the stability and control module in ACSYNT. The overall objective is to provide a capability for concurrent design of the aircraft and its flight control system, and enable concept designers to improve performance by exploiting the interrelationships between

  11. Abstracts of contributed papers

    SciTech Connect

    Not Available

    1994-08-01

    This volume contains 571 abstracts of contributed papers to be presented during the Twelfth US National Congress of Applied Mechanics. Abstracts are arranged in the order in which they fall in the program -- the main sessions are listed chronologically in the Table of Contents. The Author Index is in alphabetical order and lists each paper number (matching the schedule in the Final Program) with its corresponding page number in the book.

  12. Preliminary design study of lunar housing configurations

    NASA Technical Reports Server (NTRS)

    Reynolds, K. H.

    1992-01-01

    A preliminary design study assesses various configurations for habitation of the lunar surface. The study assumes an initial 4-man habitation module expandable to a 48-man concept. Through the numerous coupling combinations of identical modules, five basic configuration types are identified. A design model presents each configuration in light of certain issues. The issues include circulation, internal and external spatial characteristics, functional organizations, and future growth potential. The study discusses the attributes, potentials, and unique requirements of each configuration.

  13. Mirror Advanced Reactor Study interim design report

    SciTech Connect

    Not Available

    1983-04-01

    The status of the design of a tenth-of-a-kind commercial tandem-mirror fusion reactor is described at the midpoint of a two-year study. When completed, the design is to serve as a strategic goal for the mirror fusion program. The main objectives of the Mirror Advanced Reactor Study (MARS) are: (1) to design an attractive tandem-mirror fusion reactor producing electricity and synfuels (in alternate versions), (2) to identify key development and technology needs, and (3) to exploit the potential of fusion for safety, low activation, and simple disposal of radioactive waste. In the first year we have emphasized physics and engineering of the central cell and physics of the end cell. Design optimization and trade studies are continuing, and we expect additional modifications in the end cells to further improve the performance of the final design.

  14. Attracting Girls into Physics (abstract)

    NASA Astrophysics Data System (ADS)

    Gadalla, Afaf

    2009-04-01

    A recent international study of women in physics showed that enrollment in physics and science is declining for both males and females and that women are severely underrepresented in careers requiring a strong physics background. The gender gap begins early in the pipeline, from the first grade. Girls are treated differently than boys at home and in society in ways that often hinder their chances for success. They have fewer freedoms, are discouraged from accessing resources or being adventurous, have far less exposure to problem solving, and are not encouraged to choose their lives. In order to motivate more girl students to study physics in the Assiut governorate of Egypt, the Assiut Alliance for the Women and Assiut Education District collaborated in renovating the education of physics in middle and secondary school classrooms. A program that helps in increasing the number of girls in science and physics has been designed in which informal groupings are organized at middle and secondary schools to involve girls in the training and experiences needed to attract and encourage girls to learn physics. During implementation of the program at some schools, girls, because they had not been trained in problem-solving as boys, appeared not to be as facile in abstracting the ideas of physics, and that was the primary reason for girls dropping out of science and physics. This could be overcome by holding a topical physics and technology summer school under the supervision of the Assiut Alliance for the Women.

  15. A Case Study in Acoustical Design.

    ERIC Educational Resources Information Center

    Ledford, Bruce R.; Brown, John A.

    1992-01-01

    Addresses concerns of both facilities planners and instructional designers in planning for the audio component of group presentations. Factors in the architectural design of enclosures for the reproduction of sound are described, including frequency, amplitude, and reverberation; and a case study for creating an acceptable enclosure is presented.…

  16. Prospective pregnancy study designs for assessing reproductive and developmental toxicants.

    PubMed Central

    Buck, Germaine M; Lynch, Courtney D; Stanford, Joseph B; Sweeney, Anne M; Schieve, Laura A; Rockett, John C; Selevan, Sherry G; Schrader, Steven M

    2004-01-01

    The determinants of successful human reproduction and development may act as early as periconceptionally, underscoring the need to capture exposures during these critical windows when assessing potential toxicants. To identify such toxicants, couples must be studied longitudinally prior to conception without regard to a couple's ability to ascertain a clinically recognized pregnancy. We examined the utility and feasibility of prospective pregnancy study designs by conducting a systematic review of the literature to summarize relevant information regarding the planning, implementation, and success of previously published prospective pregnancy studies. Information concerning design elements and participation was abstracted from 15 eligible studies (from a total of 20 identified studies) using a standardized form. The primary author of each study was contacted to review our summary of their work and obtain missing information. Our findings confirm the ability to recruit women/couples from diverse populations using a variety of recruitment strategies. Among the studies we reviewed, 4-97% of eligible individuals were successfully contacted, with enrollment rates ranging from 42 to 100%. Length of follow-up varied from 3 to 12 months. A high percentage of women provided urine (57-98%) and blood (86-91%) specimens and most male partners (94-100%) provided semen samples. These data support the feasibility of this design. PMID:14698935

  17. Cost studies for commercial fuselage crown designs

    NASA Technical Reports Server (NTRS)

    Walker, T. H.; Smith, P. J.; Truslove, G.; Willden, K. S.; Metschan, S. L.; Pfahl, C. L.

    1991-01-01

    Studies were conducted to evaluate the cost and weight potential of advanced composite design concepts in the crown region of a commercial transport. Two designs from each of three design families were developed using an integrated design-build team. A range of design concepts and manufacturing processes were included to allow isolation and comparison of cost centers. Detailed manufacturing/assembly plans were developed as the basis for cost estimates. Each of the six designs was found to have advantages over the 1995 aluminum benchmark in cost and weight trade studies. Large quadrant panels and cobonded frames were found to save significant assembly labor costs. Comparisons of high- and intermediate-performance fiber systems were made for skin and stringer applications. Advanced tow placement was found to be an efficient process for skin lay up. Further analysis revealed attractive processes for stringers and frames. Optimized designs were informally developed for each design family, combining the most attractive concepts and processes within that family. A single optimized design was selected as the most promising, and the potential for further optimization was estimated. Technical issues and barriers were identified.

  18. DOE Ofice of Civilian Radioactive Waste Management Systems studies plan, fiscal years 1991 and 1992. [Appendix lists system studies with respective abstracts

    SciTech Connect

    Wood, T W; Haffner, D R; Fletcher, J F

    1991-08-01

    The Systems Engineering Management Plan for the DOE Office of Civilian Radioactive Waste Management, which defines the systems engineering process for the Federal Radioactive Waste System (FWMS), requires that systems studies to support the integration, evaluation, and optimization of the system be identified. These studies are generally directed toward further defining system or system-element functional requirements, including interface requirements, evaluating alternative system configurations or operational rules, or optimizing design features to achieve system integration. Because the decisions based on these studies are conducted within the overall configuration management process, a consistent and documented framework for the identification and conduct of systems studies must be available. A planned approach is needed so that results from defensible and referenceable systems analyses are available to make informed decisions in a timely manner. This Plan covers top level'' studies (i.e., those involving system requirements generally and the definition of requirements for system elements). This Plan is focused on the FY 1991 and 1992 period, and will be updated periodically as required to ensure its currency. Proposed systems studies for FY 1991 and 1992, their recommended timing, and their relations to one another, current studies, and major program milestones are identified. In general, only those studies supporting monitored retrievable storage (MRS) design requirements are recommended for immediate initiation. The studies are grouped into five major decision groups to allow scheduling to support specific decision windows. The proposed system studies schedule is generally a conservative one, with studies occurring early in or before the associated decision window. These proposed studies are described in this Plan. 16 refs., 6 figs., 2 tabs.

  19. Does "Social Work Abstracts" Work?

    ERIC Educational Resources Information Center

    Holden, Gary; Barker, Kathleen; Covert-Vail, Lucinda; Rosenberg, Gary; Cohen, Stephanie A.

    2008-01-01

    Objective: The current study seeks to provide estimates of the adequacy of journal coverage in the Social Work Abstracts (SWA) database. Method: A total of 23 journals listed in the Journal Citation Reports social work category during the 1997 to 2005 period were selected for study. Issue-level coverage estimates were obtained for SWA and…

  20. Relating clinical study design to basic research.

    PubMed

    Choh, V; Priolo, S

    1999-07-01

    Devising any research study involves careful attention to its design, as well as the development of an appropriate research question and hypothesis. Together, these attributes ensure the validity of the study in question. In most clinical or epidemiological studies, the types of research designs are often explicitly noted, whereas in papers describing basic or biological research, they are couched in different terms or, more often, are ignored, thus potentially hindering communication between basic and clinical researchers. However, given that the framework for all valid scientific research is based on sound logic, it is proposed that for each study design, a direct homology exists between clinical and basic research paradigms, despite the problem of relating epidemiological vernacular to basic research. By applying examples of basic research protocols to traditional clinical study designs, this paper shows that parallels can be drawn between the two strategies, suggesting that in the absence of a conventional nomenclature to describe basic research study designs, the use of traditional clinical design jargon is valid in describing basic research protocols. PMID:10445637

  1. Thyra Abstract Interface Package

    2005-09-01

    Thrya primarily defines a set of abstract C++ class interfaces needed for the development of abstract numerical atgorithms (ANAs) such as iterative linear solvers, transient solvers all the way up to optimization. At the foundation of these interfaces are abstract C++ classes for vectors, vector spaces, linear operators and multi-vectors. Also included in the Thyra package is C++ code for creating concrete vector, vector space, linear operator, and multi-vector subclasses as well as other utilitiesmore » to aid in the development of ANAs. Currently, very general and efficient concrete subclass implementations exist for serial and SPMD in-core vectors and multi-vectors. Code also currently exists for testing objects and providing composite objects such as product vectors.« less

  2. Abstracting and indexing guide

    USGS Publications Warehouse

    U.S. Department of the Interior; Office of Water Resources Research

    1974-01-01

    These instructions have been prepared for those who abstract and index scientific and technical documents for the Water Resources Scientific Information Center (WRSIC). With the recent publication growth in all fields, information centers have undertaken the task of keeping the various scientific communities aware of current and past developments. An abstract with carefully selected index terms offers the user of WRSIC services a more rapid means for deciding whether a document is pertinent to his needs and professional interests, thus saving him the time necessary to scan the complete work. These means also provide WRSIC with a document representation or surrogate which is more easily stored and manipulated to produce various services. Authors are asked to accept the responsibility for preparing abstracts of their own papers to facilitate quick evaluation, announcement, and dissemination to the scientific community.

  3. Radioactive dating: Studies on ground water and sediments. (Latest citations from the Selected Water Resources Abstracts database). Published Search

    SciTech Connect

    Not Available

    1994-10-01

    The bibliography contains citations concerning radioactive dating of ground water and sediments. Articles discuss ground water movement and recharge; and lake, marine, and glacial sediments. Citations address dating techniques using isotopes of carbon, lead, uranium, radium, and tritium. Studies on sedimentation rate, water quality, aquifer characteristics, geological survey, and glacial history are presented. (Contains a minimum of 103 citations and includes a subject term index and title list.)

  4. Scientific drilling to study the roots of active hydrothermal systems related to young magmatic intrusions. [Abstract only

    SciTech Connect

    Muffler, L.J.P.

    1983-03-01

    At present, hydrothermal-magma processes can be studied only inferentially, using observations on hot springs and volcanic rocks, data from shallow- and intermediate-depth drill holes, analogies with exhumed fossil systems, and extrapolation of laboratory investigations. The Thermal Regimes Panel of the Continental Scientific Drilling Committee in a draft report concludes that an understanding of active hydrothermal-magma systems requires drill-hole investigations of deeper and hotter levels than have been drilled and studied to date. The Panel groups hydrothermal-magma systems in the United States into five classes: (1) dominantly andesitic centers, (2) spreading ridges, (3) basaltic fields, (4) evolved basaltic centers, and (5) silicic caldera complexes. Application of eight scientific criteria and three social criteria leads to the conclusion that silicic caldera complexes should be the first target of a focused drilling program to investigate the hydrothermal-magma interface at depths of 5 to 7 km. Primary targets are the three young, silicic caldera systems in the western conterminous United States: Yellowstone (Wyoming), Valles (New Mexico), and Long Valley (California). Scientific drilling of these active hydrothermal-magma systems complements scientific drilling proposed for fossil systems such as Creede (Colorado). In addition, the roots of the Salton Sea geothermal system (California) present an opportunity for add-on deep drilling and scientific experiments to supplement geothermal drilling by industry in this active spreading-ridge environment.

  5. Design optimization studies using COSMIC NASTRAN

    NASA Technical Reports Server (NTRS)

    Pitrof, Stephen M.; Bharatram, G.; Venkayya, Vipperla B.

    1993-01-01

    The purpose of this study is to create, test and document a procedure to integrate mathematical optimization algorithms with COSMIC NASTRAN. This procedure is very important to structural design engineers who wish to capitalize on optimization methods to ensure that their design is optimized for its intended application. The OPTNAST computer program was created to link NASTRAN and design optimization codes into one package. This implementation was tested using two truss structure models and optimizing their designs for minimum weight, subject to multiple loading conditions and displacement and stress constraints. However, the process is generalized so that an engineer could design other types of elements by adding to or modifying some parts of the code.

  6. Design Considerations for Artificial Pancreas Pivotal Studies.

    PubMed

    Russell, Steven J; Beck, Roy W

    2016-07-01

    The development of artificial pancreas systems has evolved to the point that pivotal studies designed to assess efficacy and safety are in progress or soon to be initiated. These pivotal studies are intended to provide the necessary data to gain clearance from the U.S. Food and Drug Administration, coverage by payers, and adoption by patients and clinicians. Although there will not be one design that is appropriate for every system, there are certain aspects of protocol design that will be considerations in all pivotal studies designed to assess efficacy and safety. One key aspect of study design is the intervention to be used by the control group. A case can be made that the control group should use the currently available best technology, which is sensor-augmented pump therapy. However, an equally, if not more, compelling case can be made that the control intervention should be usual care. In this Perspective, we elaborate on this issue and provide a pragmatic approach to the design of clinical trials of artificial pancreas systems. PMID:27330125

  7. Abstraction and art.

    PubMed Central

    Gortais, Bernard

    2003-01-01

    In a given social context, artistic creation comprises a set of processes, which relate to the activity of the artist and the activity of the spectator. Through these processes we see and understand that the world is vaster than it is said to be. Artistic processes are mediated experiences that open up the world. A successful work of art expresses a reality beyond actual reality: it suggests an unknown world using the means and the signs of the known world. Artistic practices incorporate the means of creation developed by science and technology and change forms as they change. Artists and the public follow different processes of abstraction at different levels, in the definition of the means of creation, of representation and of perception of a work of art. This paper examines how the processes of abstraction are used within the framework of the visual arts and abstract painting, which appeared during a period of growing importance for the processes of abstraction in science and technology, at the beginning of the twentieth century. The development of digital platforms and new man-machine interfaces allow multimedia creations. This is performed under the constraint of phases of multidisciplinary conceptualization using generic representation languages, which tend to abolish traditional frontiers between the arts: visual arts, drama, dance and music. PMID:12903659

  8. The SIDdatagrabber (Abstract)

    NASA Astrophysics Data System (ADS)

    Silvis, G.

    2015-12-01

    (Abstract only) The Stanford/SARA SuperSid project offers an opportunity for adding data to the AAVSO SID Monitoring project. You can now build a SID antenna and monitoring setup for about $150. And with the SIDdatagrabber application you can easily re-purpose the data collected for the AAVSO.

  9. Making the Abstract Concrete

    ERIC Educational Resources Information Center

    Potter, Lee Ann

    2005-01-01

    President Ronald Reagan nominated a woman to serve on the United States Supreme Court. He did so through a single-page form letter, completed in part by hand and in part by typewriter, announcing Sandra Day O'Connor as his nominee. While the document serves as evidence of a historic event, it is also a tangible illustration of abstract concepts…

  10. Learning Abstracts, 2001.

    ERIC Educational Resources Information Center

    Wilson, Cynthia, Ed.

    2001-01-01

    Volume 4 of the League for Innovation in the Community College's Learning Abstracts include the following: (1) "Touching Students in the Digital Age: The Move Toward Learner Relationship Management (LRM)," by Mark David Milliron, which offers an overview of an organizing concept to help community colleges navigate the intersection between digital…

  11. Leadership Abstracts, 2002.

    ERIC Educational Resources Information Center

    Wilson, Cynthia, Ed.; Milliron, Mark David, Ed.

    2002-01-01

    This 2002 volume of Leadership Abstracts contains issue numbers 1-12. Articles include: (1) "Skills Certification and Workforce Development: Partnering with Industry and Ourselves," by Jeffrey A. Cantor; (2) "Starting Again: The Brookhaven Success College," by Alice W. Villadsen; (3) "From Digital Divide to Digital Democracy," by Gerardo E. de los…

  12. Leadership Abstracts, 1993.

    ERIC Educational Resources Information Center

    Doucette, Don, Ed.

    1993-01-01

    This document includes 10 issues of Leadership Abstracts (volume 6, 1993), a newsletter published by the League for Innovation in the Community College (California). The featured articles are: (1) "Reinventing Government" by David T. Osborne; (2) "Community College Workforce Training Programs: Expanding the Mission to Meet Critical Needs" by…

  13. Abstraction through Game Play

    ERIC Educational Resources Information Center

    Avraamidou, Antri; Monaghan, John; Walker, Aisha

    2012-01-01

    This paper examines the computer game play of an 11-year-old boy. In the course of building a virtual house he developed and used, without assistance, an artefact and an accompanying strategy to ensure that his house was symmetric. We argue that the creation and use of this artefact-strategy is a mathematical abstraction. The discussion…

  14. CIRF Abstracts, Volume 12.

    ERIC Educational Resources Information Center

    International Labour Office, Geneva (Switzerland).

    The aim of the CIRF abstracts is to convey information about vocational training ideas, programs, experience, and experiments described in periodicals, books, and other publications and relating to operative personnel, supervisors, and technical and training staff in all sectors of economic activity. Information is also given on major trends in…

  15. Leadership Abstracts, 1999.

    ERIC Educational Resources Information Center

    Leadership Abstracts, 1999

    1999-01-01

    This document contains five Leadership Abstracts publications published February-December 1999. The article, "Teaching the Teachers: Meeting the National Teacher Preparation Challenge," authored by George R. Boggs and Sadie Bragg, examines the community college role and makes recommendations and a call to action for teacher education. "Chaos…

  16. Double Trouble (Abstract)

    NASA Astrophysics Data System (ADS)

    Simonsen, M.

    2015-12-01

    (Abstract only) Variable stars with close companions can be difficult to accurately measure and characterize. The companions can create misidentifications, which in turn can affect the perceived magnitudes, amplitudes, periods, and colors of the variable stars. We will show examples of these Double Trouble stars and the impact their close companions have had on our understanding of some of these variable stars.

  17. Send Me No Abstract.

    ERIC Educational Resources Information Center

    Levy, Steven

    1985-01-01

    Discusses Magazine Index's practice of assigning letter grades (sometimes inaccurate) to book, restaurant, and movie reviews, thus allowing patrons to get the point of the review from the index rather than the article itself, and argues that this situation is indicative of the larger problem of reliability of abstracts. (MBR)

  18. Annual Conference Abstracts

    ERIC Educational Resources Information Center

    Engineering Education, 1976

    1976-01-01

    Presents the abstracts of 158 papers presented at the American Society for Engineering Education's annual conference at Knoxville, Tennessee, June 14-17, 1976. Included are engineering topics covering education, aerospace, agriculture, biomedicine, chemistry, computers, electricity, acoustics, environment, mechanics, and women. (SL)

  19. Reasoning abstractly about resources

    NASA Technical Reports Server (NTRS)

    Clement, B.; Barrett, A.

    2001-01-01

    r describes a way to schedule high level activities before distributing them across multiple rovers in order to coordinate the resultant use of shared resources regardless of how each rover decides how to perform its activities. We present an algorithm for summarizing the metric resource requirements of an abstract activity based n the resource usages of its potential refinements.

  20. Abstracts of SIG Sessions.

    ERIC Educational Resources Information Center

    Proceedings of the ASIS Annual Meeting, 1995

    1995-01-01

    Presents abstracts of 15 special interest group (SIG) sessions. Topics include navigation and information utilization in the Internet, natural language processing, automatic indexing, image indexing, classification, users' models of database searching, online public access catalogs, education for information professions, information services,…

  1. 2002 NASPSA Conference Abstracts.

    ERIC Educational Resources Information Center

    Journal of Sport & Exercise Psychology, 2002

    2002-01-01

    Contains abstracts from the 2002 conference of the North American Society for the Psychology of Sport and Physical Activity. The publication is divided into three sections: the preconference workshop, "Effective Teaching Methods in the Classroom;" symposia (motor development, motor learning and control, and sport psychology); and free…

  2. Learning Abstracts, 1999.

    ERIC Educational Resources Information Center

    League for Innovation in the Community Coll.

    This document contains volume two of Learning Abstracts, a bimonthly newsletter from the League for Innovation in the Community College. Articles in these seven issues include: (1) "Get on the Fast Track to Learning: An Accelerated Associate Degree Option" (Gerardo E. de los Santos and Deborah J. Cruise); (2) "The Learning College: Both Learner…

  3. Computers in Abstract Algebra

    ERIC Educational Resources Information Center

    Nwabueze, Kenneth K.

    2004-01-01

    The current emphasis on flexible modes of mathematics delivery involving new information and communication technology (ICT) at the university level is perhaps a reaction to the recent change in the objectives of education. Abstract algebra seems to be one area of mathematics virtually crying out for computer instructional support because of the…

  4. Abstract Film and Beyond.

    ERIC Educational Resources Information Center

    Le Grice, Malcolm

    A theoretical and historical account of the main preoccupations of makers of abstract films is presented in this book. The book's scope includes discussion of nonrepresentational forms as well as examination of experiments in the manipulation of time in films. The ten chapters discuss the following topics: art and cinematography, the first…

  5. A full-dimensional quantum dynamics study of the mode specificity in the H + HOD abstraction reaction.

    PubMed

    Fu, Bina; Zhang, Dong H

    2015-02-14

    We employ the initial state-selected time-dependent wave packet approach to an atom-triatom reaction to study the H + HOD → OH + HD/OD + H2 reaction without the centrifugal sudden approximation, based on an accurate potential energy surface which was recently developed by neural network fitting to high level ab initio energy points. The total reaction probabilities and integral cross sections, which are the exact coupled-channel results, are calculated for the HOD reactant initially in the ground and several vibrationally excited states, including the bending excited state, OD stretching excited states, OH stretching excited states, and combined excitations of them. The reactivity enhancements from different initial states of HOD are presented, which feature strong bond-selective effects of the reaction dynamics. The current results for the product branching ratios, reactivity enhancements, and relative cross sections are largely improved over the previous calculations, in quantitatively good agreement with experiment. The thermal rate constant for the title reaction and the contributions from individual vibrational states of HOD are also obtained. PMID:25681913

  6. Dynamics study of the OH + NH3 hydrogen abstraction reaction using QCT calculations based on an analytical potential energy surface

    NASA Astrophysics Data System (ADS)

    Monge-Palacios, M.; Corchado, J. C.; Espinosa-Garcia, J.

    2013-06-01

    To understand the reactivity and mechanism of the OH + NH3 → H2O + NH2 gas-phase reaction, which evolves through wells in the entrance and exit channels, a detailed dynamics study was carried out using quasi-classical trajectory calculations. The calculations were performed on an analytical potential energy surface (PES) recently developed by our group, PES-2012 [Monge-Palacios et al. J. Chem. Phys. 138, 084305 (2013)], 10.1063/1.4792719. Most of the available energy appeared as H2O product vibrational energy (54%), reproducing the only experimental evidence, while only the 21% of this energy appeared as NH2 co-product vibrational energy. Both products appeared with cold and broad rotational distributions. The excitation function (constant collision energy in the range 1.0-14.0 kcal mol-1) increases smoothly with energy, contrasting with the only theoretical information (reduced-dimensional quantum scattering calculations based on a simplified PES), which presented a peak at low collision energies, related to quantized states. Analysis of the individual reactive trajectories showed that different mechanisms operate depending on the collision energy. Thus, while at high energies (Ecoll ≥ 6 kcal mol-1) all trajectories are direct, at low energies about 20%-30% of trajectories are indirect, i.e., with the mediation of a trapping complex, mainly in the product well. Finally, the effect of the zero-point energy constraint on the dynamics properties was analyzed.

  7. A full-dimensional quantum dynamics study of the mode specificity in the H + HOD abstraction reaction

    SciTech Connect

    Fu, Bina Zhang, Dong H.

    2015-02-14

    We employ the initial state-selected time-dependent wave packet approach to an atom-triatom reaction to study the H + HOD → OH + HD/OD + H{sub 2} reaction without the centrifugal sudden approximation, based on an accurate potential energy surface which was recently developed by neural network fitting to high level ab initio energy points. The total reaction probabilities and integral cross sections, which are the exact coupled-channel results, are calculated for the HOD reactant initially in the ground and several vibrationally excited states, including the bending excited state, OD stretching excited states, OH stretching excited states, and combined excitations of them. The reactivity enhancements from different initial states of HOD are presented, which feature strong bond-selective effects of the reaction dynamics. The current results for the product branching ratios, reactivity enhancements, and relative cross sections are largely improved over the previous calculations, in quantitatively good agreement with experiment. The thermal rate constant for the title reaction and the contributions from individual vibrational states of HOD are also obtained.

  8. Generic turbine design study. Final report

    SciTech Connect

    Not Available

    1993-06-01

    The purpose of Task 12, Generic Turbine Design Study was to develop a conceptual design of a combustion turbine system that would perform in a pressurized fluidized bed combustor (PFBC) application. A single inlet/outlet casing design that modifies the W251B12 combustion turbine to provide compressed air to the PFBC and accept clean hot air from the PFBC was developed. Performance calculations show that the net power output expected, at an inlet temperature of 59{degrees}F, is 20,250 kW.

  9. Engineering study for ISSTRS design concept

    SciTech Connect

    Hertzel, J.S.

    1997-01-31

    Los Alamos Technical Associates, Inc., is pleased to transmit the attached Conceptual Design Package for the Initial Single Shell Tank Retrieval System (ISSTRS), 90% Conceptual Design Review. The package includes the following: (1) ISSTRS Trade Studies: (a) Retrieval Facility Cooling Requirements; (b) Equipment Re-usability between Project W-320 and Tanks 241-C-103 and 241-C-1 05; (c) Sluice Line Options; and (d) Options for the Location of Tanks AX-103 and A-1 02 HVAC Equipment; (2) Drawings; (3) Risk Management Plan; (4) 0850 Interface Control Document; (5) Requirements Traceability Report; and (6) Project Design Specification.

  10. Controlled air incinerator conceptual design study

    SciTech Connect

    Not Available

    1982-01-01

    This report presents a conceptual design study for a controlled air incinerator facility for incineration of low level combustible waste at Three Mile Island Unit 2 (TMI-2). The facility design is based on the use of a Helix Process Systems controlled air incinerator. Cost estimates and associated engineering, procurement, and construction schedules are also provided. The cost estimates and schedules are presented for two incinerator facility designs, one with provisions for waste ash solidification, the other with provisions for packaging the waste ash for transport to an undefined location.

  11. Giant magnetoresistance studies in evaporated Ni-Fe/Cu and Ni-Fe-Co/Cu multilayers (abstract)

    NASA Astrophysics Data System (ADS)

    Haftek, E.; Zeltser, A. M.; Smith, Neil

    1997-04-01

    Room temperature giant magnetoresistance (GMR) and magnetic properties of (Ni-Fe/Cu)n and (Ni-Fe-Co/Cu)n multilayers were investigated. Alternating layers of Ni-Fe-(Co) and Cu were electron-beam evaporated in a computer-controlled high-vacuum system at base pressure of ⩽4×10-8 Torr and deposition rates of ⩽2 Å/s. To complement and expand our previous investigation,1 GMR properties were additionally studied here as a function of cobalt content of Ni-Fe-Co films, the number (n) of bilayers, deposition temperature, and type of buffer layer. The Co content was varied from 7 to 17 at. %, and the number of bilayers ranged from n=8 to 20. No significant GMR was observed in the as-deposited multilayers. To produce tangible GMR, these multilayers were annealed between 300 and 360 °C for 2 h in a 150 Oe magnetic field in an argon atmosphere. The GMR effect (ΔR/R) was essentially independent of copper spacer thickness, which varied between 25 and 30 Å. For Co containing multilayers the highest ΔR/R=7.6% was obtained for 17 at. % Co deposited at 100 °C. The ΔR/R in all Ni-Fe-Co/Cu multilayers was sensitive to the deposition temperature, and R-H loops always showed significant hysteresis independent of the type of buffer layer. For application of these materials to very high density reproduce heads,2 the best results were obtained for (27 Å NiFe/25 Å Cu)14-18 multilayers deposited at 160 °C on 70 Å Ta buffer layer. For example, n=17 multilayers annealed at 350 °C exhibited ΔR/R=7.5%, half-width at half-maximum of ˜50 Oe, essentially no anisotropy, and virtually zero hysteresis (Fig. 1). Frequency dependent permeability measurements showed constant permeability between 10 and 200 MHz. Low- and high-angle x-ray diffraction as well as atomic force microscopy were used to investigate the effect of different geometries of multilayers on structure and roughness and to correlate them with GMR properties.

  12. Abstract Journal Concept Being Examined

    ERIC Educational Resources Information Center

    Somerville, Brendan F.

    1972-01-01

    In order to control the information explosion, some European chemical groups are studying the idea of abandoning full publication in printed form of all primary journals and, in their place, substituting a new form of abstract journal combined with a microfilm record of full scientific papers. (Author/CP)

  13. Office Design: A Study of Environment.

    ERIC Educational Resources Information Center

    Manning, Peter, Ed.

    Reporting upon a study of environment which was based on the design of office buildings and office space, the study forms part of a continuing program of environmental research sponsored by Pilkington Brothers Limited of St. Helens, England. In this report the word 'environment' is used in the sense of the sum of the physical and emotional…

  14. Collaborative Behavioral Teratology Study: protocol design and testing procedures.

    PubMed

    Adams, J; Buelke-Sam, J; Kimmel, C A; Nelson, C J; Reiter, L W; Sobotka, T J; Tilson, H A; Nelson, B K

    1985-01-01

    This paper presents background information on the methods used in the Collaborative Behavioral Teratology Study (CBTS), the rationale behind the experimental design, and the design and specific procedures used in the CBTS. Each of the following methods is discussed: negative geotaxis, olfactory discrimination, auditory startle habituation, one-hour activity in the figure-8 maze, visual discrimination learning, 23-hour activity in the figure-8 maze, and amphetamine-stimulated activity. The CBTS was designed to determine the intra- and interlaboratory reliability of these test methods and the detection sensitivity of each method, as well as to determine the importance of several major variables (early test experience, gender, litter). The important design features which permitted these evaluations are discussed. Each laboratory conducted two independent experiments: one using d-amphetamine sulfate as the test agent and one using methylmercuric chloride. Other than the use of different agents and dosing regimens in the two studies, all other characteristics of experimental design were identical. Each study was conducted in four replicates with 4 litters/each of 4 treatment groups/replicate. The replicate design was an important feature which permitted reliability of the tests to be addressed under conditions in which several other sources of variation in responding could be identified and accounted for in the model. Other methods by which optimal testing conditions were implemented in the participating laboratories included the "blind" testing of all subjects in specific orders which were counterbalanced for treatment group, time of day, and the apparatus in which the animals were placed.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:3835452

  15. Semantic memory: distinct neural representations for abstractness and valence.

    PubMed

    Skipper, Laura M; Olson, Ingrid R

    2014-03-01

    The hypothesis that abstract words are grounded in emotion has been supported by behavioral research and corpus studies of English words. A recent neuroimaging study reported that a single brain region, the rostral anterior cingulate cortex (rACC), is responsive to abstract words, and is furthermore modulated by the emotional valence. This finding is surprising because the rACC is not commonly associated with semantic processing. It is possible that the effects observed were driven not by abstractness, but rather by valence, since the abstract words used in that study were significantly more emotional than the concrete words. We tested this hypothesis by presenting participants with words that were abstract/concrete, as well as emotionally valenced/neutral in a 2×2 factorial design. Activations to emotional words overlapped with both abstract and concrete activations throughout the brain. An ROI analysis revealed that the rACC was responsive to valence, not abstractness, when concreteness and valence unconfounded. PMID:24561187

  16. Experimental design of a waste glass study

    SciTech Connect

    Piepel, G.F.; Redgate, P.E.; Hrma, P.

    1995-04-01

    A Composition Variation Study (CVS) is being performed to support a future high-level waste glass plant at Hanford. A total of 147 glasses, covering a broad region of compositions melting at approximately 1150{degrees}C, were tested in five statistically designed experimental phases. This paper focuses on the goals, strategies, and techniques used in designing the five phases. The overall strategy was to investigate glass compositions on the boundary and interior of an experimental region defined by single- component, multiple-component, and property constraints. Statistical optimal experimental design techniques were used to cover various subregions of the experimental region in each phase. Empirical mixture models for glass properties (as functions of glass composition) from previous phases wee used in designing subsequent CVS phases.

  17. Study and design of cryogenic propellant acquisition systems. Volume 1: Design studies

    NASA Technical Reports Server (NTRS)

    Burge, G. W.; Blackmon, J. B.

    1973-01-01

    An in-depth study and selection of practical propellant surface tension acquisition system designs for two specific future cryogenic space vehicles, an advanced cryogenic space shuttle auxiliary propulsion system and an advanced space propulsion module is reported. A supporting laboratory scale experimental program was also conducted to provide design information critical to concept finalization and selection. Designs using localized pressure isolated surface tension screen devices were selected for each application and preliminary designs were generated. Based on these designs, large scale acquisition prototype hardware was designed and fabricated to be compatible with available NASA-MSFC feed system hardware.

  18. Phenotypic extremes in rare variant study designs.

    PubMed

    Peloso, Gina M; Rader, Daniel J; Gabriel, Stacey; Kathiresan, Sekar; Daly, Mark J; Neale, Benjamin M

    2016-06-01

    Currently, next-generation sequencing studies aim to identify rare and low-frequency variation that may contribute to disease. For a given effect size, as the allele frequency decreases, the power to detect genes or variants of interest also decreases. Although many methods have been proposed for the analysis of such data, study design and analytic issues still persist in data interpretation. In this study we present sequencing data for ABCA1 that has known rare variants associated with high-density lipoprotein cholesterol (HDL-C). We contrast empirical findings from two study designs: a phenotypic extreme sample and a population-based random sample. We found differing strengths of association with HDL-C across the two study designs (P=0.0006 with n=701 phenotypic extremes vs P=0.03 with n=1600 randomly sampled individuals). To explore this apparent difference in evidence for association, we performed a simulation study focused on the impact of phenotypic selection on power. We demonstrate that the power gain for an extreme phenotypic selection study design is much greater in rare variant studies than for studies of common variants. Our study confirms that studying phenotypic extremes is critical in rare variant studies because it boosts power in two ways: the typical increases from extreme sampling and increasing the proportion of relevant functional variants ascertained and thereby tested for association. Furthermore, we show that when combining statistical evidence through meta-analysis from an extreme-selected sample and a second separate population-based random sample, power is lower when a traditional sample size weighting is used compared with weighting by the noncentrality parameter. PMID:26350511

  19. Defining and Designing Mixed Research Synthesis Studies

    PubMed Central

    Sandelowski, Margarete; Voils, Corrine I.; Barroso, Julie

    2009-01-01

    Mixed research synthesis is the latest addition to the repertoires of mixed methods research and systematic review. Mixed research synthesis requires that the problems generated by the methodological diversity within and between qualitative and quantitative studies be resolved. Three basic research designs accommodate this diversity, including the segregated, integrated, and contingent designs. Much work remains to be done before mixed research synthesis can secure its place in the repertoires of mixed methods research and systematic review, but the effort is well worth it as it has the potential to enhance both the significance and utility for practice of the many qualitative and quantitative studies constituting shared domains of research. PMID:20098638

  20. Historical development of abstracting.

    PubMed

    Skolnik, H

    1979-11-01

    The abstract, under a multitude of names, such as hypothesis, marginalia, abridgement, extract, digest, précis, resumé, and summary, has a long history, one which is concomitant with advancing scholarship. The progression of this history from the Sumerian civilization ca. 3600 B.C., through the Egyptian and Greek civilizations, the Hellenistic period, the Dark Ages, Middle Ages, Renaissance, and into the modern period is reviewed. PMID:399482

  1. Generalized Abstract Symbolic Summaries

    NASA Technical Reports Server (NTRS)

    Person, Suzette; Dwyer, Matthew B.

    2009-01-01

    Current techniques for validating and verifying program changes often consider the entire program, even for small changes, leading to enormous V&V costs over a program s lifetime. This is due, in large part, to the use of syntactic program techniques which are necessarily imprecise. Building on recent advances in symbolic execution of heap manipulating programs, in this paper, we develop techniques for performing abstract semantic differencing of program behaviors that offer the potential for improved precision.

  2. Learning Designs: Study, Learn, Design; Repeat as Necessary

    ERIC Educational Resources Information Center

    Joyce, Bruce R.; Calhoun, Emily F.

    2011-01-01

    Designers reside mostly in school districts and schools and can have primary assignments of all sorts. In many districts, central office personnel are most visible on design committees, but teachers, principals, and superintendents are included. Members of professional learning communities can design their own processes, and individual teachers…

  3. Instructional Design by Novice Designers: Two Empirical Studies

    ERIC Educational Resources Information Center

    Verstegen, Danielle; Barnard, Yvonne; Pilot, Albert

    2008-01-01

    In many cases advanced instructional products, such as computer-based training, e-learning programs, simulations, and simulators are not designed by experienced instructional designers, but by novices: subject matter experts, teachers, instructors, or inexperienced designers. The literature indicates that these novices do not always have the…

  4. EBS Radionuclide Transport Abstraction

    SciTech Connect

    J. Prouty

    2006-07-14

    The purpose of this report is to develop and analyze the engineered barrier system (EBS) radionuclide transport abstraction model, consistent with Level I and Level II model validation, as identified in Technical Work Plan for: Near-Field Environment and Transport: Engineered Barrier System: Radionuclide Transport Abstraction Model Report Integration (BSC 2005 [DIRS 173617]). The EBS radionuclide transport abstraction (or EBS RT Abstraction) is the conceptual model used in the total system performance assessment (TSPA) to determine the rate of radionuclide releases from the EBS to the unsaturated zone (UZ). The EBS RT Abstraction conceptual model consists of two main components: a flow model and a transport model. Both models are developed mathematically from first principles in order to show explicitly what assumptions, simplifications, and approximations are incorporated into the models used in the TSPA. The flow model defines the pathways for water flow in the EBS and specifies how the flow rate is computed in each pathway. Input to this model includes the seepage flux into a drift. The seepage flux is potentially split by the drip shield, with some (or all) of the flux being diverted by the drip shield and some passing through breaches in the drip shield that might result from corrosion or seismic damage. The flux through drip shield breaches is potentially split by the waste package, with some (or all) of the flux being diverted by the waste package and some passing through waste package breaches that might result from corrosion or seismic damage. Neither the drip shield nor the waste package survives an igneous intrusion, so the flux splitting submodel is not used in the igneous scenario class. The flow model is validated in an independent model validation technical review. The drip shield and waste package flux splitting algorithms are developed and validated using experimental data. The transport model considers advective transport and diffusive transport

  5. Designing a Futuristic Business Studies Curriculum

    ERIC Educational Resources Information Center

    Mei, Chiew Wye; Siraj, Saedah

    2013-01-01

    This paper is a discourse on the theoretical aspects underpinning the design of the Business Studies curriculum domain. It draws on recent shifts in the business and educational environment of Malaysia, and maps out the methodology and method for expanding and revamping the core ground of the discipline. Using the pragmatic worldview stance, this…

  6. Deepening Kindergarteners' Science Vocabulary: A Design Study

    ERIC Educational Resources Information Center

    Parsons, Allison Ward; Bryant, Camille Lawrence

    2016-01-01

    Early, effective instruction to introduce both science vocabulary and general academic language may help children build a strong conceptual and linguistic foundation for later instruction. In this study, a design research intervention was employed to expose children to a variety of interrelated science content words to increase both the breadth…

  7. Overall Rationale and Design of Study.

    ERIC Educational Resources Information Center

    Hegsted, D. Mark

    This paper outlines research designed to establish dietary correlates of malnutrition, and questions the common assumption that high protein foods should be used as dietary supplements in humans. Because thorough investigation of dietary needs in children is ethically unfeasible, squirrel monkeys were used in the research to study the biological…

  8. Preliminary design study of a baseline MIUS

    NASA Technical Reports Server (NTRS)

    Wolfer, B. M.; Shields, V. E.; Rippey, J. O.; Roberts, H. L.; Wadle, R. C.; Wallin, S. P.; Gill, W. L.; White, E. H.; Monzingo, R.

    1977-01-01

    Results of a conceptual design study to establish a baseline design for a modular integrated utility system (MIUS) are presented. The system concept developed a basis for evaluating possible projects to demonstrate an MIUS. For the baseline study, climate conditions for the Washington, D.C., area were used. The baseline design is for a high density apartment complex of 496 dwelling units with a planned full occupancy of approximately 1200 residents. Environmental considerations and regulations for the MIUS installation are discussed. Detailed cost data for the baseline MIUS are given together with those for design and operating variations under climate conditions typified by Las Vegas, Nevada, Houston, Texas, and Minneapolis, Minnesota. In addition, results of an investigation of size variation effects, for 300 and 1000 unit apartment complexes, are presented. Only conceptual aspects of the design are discussed. Results regarding energy savings and costs are intended only as trend information and for use in relative comparisons. Alternate heating, ventilation, and air conditioning concepts are considered in the appendix.

  9. Research & writing basics: elements of the abstract.

    PubMed

    Krasner, D; Van Rijswijk, L

    1995-04-01

    Writing an abstract is a challenging skill that requires precision and care. Criteria for well-formulated abstracts and abstract guidelines for 2 types of articles (empirical studies and reviews or theoretical articles) as well as a description of the content of a structured abstract are presented. Details were gleaned from a review of the literature including the American Medical Association Manual of Style, Eighth Edition and the Publication Manual of the American Psychological Association, Fourth Edition. A good abstract is like a crystal: it is a clear, sharp synthesis that elucidates meaning for the reader. PMID:7546111

  10. LST phase A design update study

    NASA Technical Reports Server (NTRS)

    1973-01-01

    An update is presented of the Phase A study of the Large Space Telescope (LST), based on changes in guidelines and new data developed subsequent to the Phase A study. The study defines an LST concept based on the broad mission guidelines provided by the Office of Space Science (OSS), the scientific requirements developed by OSS with the scientific community, and an understanding of long range NASA planning current at the time the study was performed. A low cost design approach was followed. This resulted in the use of standard spacecraft hardware, the provision for maintenance at the black box level, growth potential in systems designs, and sharing of shuttle maintenance flights with other payloads (See N73-18449 through N73-18453)

  11. The Development of Flexibility and Abstraction in Preschool Children

    ERIC Educational Resources Information Center

    Bennett, Joanna; Muller, Ulrich

    2010-01-01

    This study examined the development of flexibility and abstraction in preschool children by using a newly designed Pattern Completion Task (PCT) and the Flexible Item Selection Task (FIST). In the PCT, children were presented with an incomplete pattern consisting of different-colored shapes and were asked to select the colored shape that…

  12. Study on singular radius and surface boundary constraint in refractive beam shaper design

    SciTech Connect

    Liu, C.; Zhang, Shukui

    2007-10-01

    Abstract: This paper presents analysis on important issues associated with the design of the refractive laser beam shaping system. The concept of â singular radiusâ is introduced along with solutions to minimize its adverse effect on the shaper performance. In addition, the surface boundary constraint is also discussed in details. This study provides useful guidelines against possible general design errors that would degrade the shaper quality or add undesired complication to the system.

  13. An empirical study of software design practices

    NASA Technical Reports Server (NTRS)

    Card, David N.; Church, Victor E.; Agresti, William W.

    1986-01-01

    Software engineers have developed a large body of software design theory and folklore, much of which was never validated. The results of an empirical study of software design practices in one specific environment are presented. The practices examined affect module size, module strength, data coupling, descendant span, unreferenced variables, and software reuse. Measures characteristic of these practices were extracted from 887 FORTRAN modules developed for five flight dynamics software projects monitored by the Software Engineering Laboratory (SEL). The relationship of these measures to cost and fault rate was analyzed using a contingency table procedure. The results show that some recommended design practices, despite their intuitive appeal, are ineffective in this environment, whereas others are very effective.

  14. Cryogenic Propellant Management Device: Conceptual Design Study

    NASA Technical Reports Server (NTRS)

    Wollen, Mark; Merino, Fred; Schuster, John; Newton, Christopher

    2010-01-01

    Concepts of Propellant Management Devices (PMDs) were designed for lunar descent stage reaction control system (RCS) and lunar ascent stage (main and RCS propulsion) missions using liquid oxygen (LO2) and liquid methane (LCH4). Study ground rules set a maximum of 19 days from launch to lunar touchdown, and an additional 210 days on the lunar surface before liftoff. Two PMDs were conceptually designed for each of the descent stage RCS propellant tanks, and two designs for each of the ascent stage main propellant tanks. One of the two PMD types is a traditional partial four-screen channel device. The other type is a novel, expanding volume device which uses a stretched, flexing screen. It was found that several unique design features simplified the PMD designs. These features are (1) high propellant tank operating pressures, (2) aluminum tanks for propellant storage, and (3) stringent insulation requirements. Consequently, it was possible to treat LO2 and LCH4 as if they were equivalent to Earth-storable propellants because they would remain substantially subcooled during the lunar mission. In fact, prelaunch procedures are simplified with cryogens, because any trapped vapor will condense once the propellant tanks are pressurized in space.

  15. Thermodynamic Studies for Drug Design and Screening

    PubMed Central

    Garbett, Nichola C.; Chaires, Jonathan B.

    2012-01-01

    Introduction A key part of drug design and development is the optimization of molecular interactions between an engineered drug candidate and its binding target. Thermodynamic characterization provides information about the balance of energetic forces driving binding interactions and is essential for understanding and optimizing molecular interactions. Areas covered This review discusses the information that can be obtained from thermodynamic measurements and how this can be applied to the drug development process. Current approaches for the measurement and optimization of thermodynamic parameters are presented, specifically higher throughput and calorimetric methods. Relevant literature for this review was identified in part by bibliographic searches for the period 2004 – 2011 using the Science Citation Index and PUBMED and the keywords listed below. Expert opinion The most effective drug design and development platform comes from an integrated process utilizing all available information from structural, thermodynamic and biological studies. Continuing evolution in our understanding of the energetic basis of molecular interactions and advances in thermodynamic methods for widespread application are essential to realize the goal of thermodynamically-driven drug design. Comprehensive thermodynamic evaluation is vital early in the drug development process to speed drug development towards an optimal energetic interaction profile while retaining good pharmacological properties. Practical thermodynamic approaches, such as enthalpic optimization, thermodynamic optimization plots and the enthalpic efficiency index, have now matured to provide proven utility in design process. Improved throughput in calorimetric methods remains essential for even greater integration of thermodynamics into drug design. PMID:22458502

  16. EBS Radionuclide Transport Abstraction

    SciTech Connect

    J.D. Schreiber

    2005-08-25

    The purpose of this report is to develop and analyze the engineered barrier system (EBS) radionuclide transport abstraction model, consistent with Level I and Level II model validation, as identified in ''Technical Work Plan for: Near-Field Environment and Transport: Engineered Barrier System: Radionuclide Transport Abstraction Model Report Integration'' (BSC 2005 [DIRS 173617]). The EBS radionuclide transport abstraction (or EBS RT Abstraction) is the conceptual model used in the total system performance assessment for the license application (TSPA-LA) to determine the rate of radionuclide releases from the EBS to the unsaturated zone (UZ). The EBS RT Abstraction conceptual model consists of two main components: a flow model and a transport model. Both models are developed mathematically from first principles in order to show explicitly what assumptions, simplifications, and approximations are incorporated into the models used in the TSPA-LA. The flow model defines the pathways for water flow in the EBS and specifies how the flow rate is computed in each pathway. Input to this model includes the seepage flux into a drift. The seepage flux is potentially split by the drip shield, with some (or all) of the flux being diverted by the drip shield and some passing through breaches in the drip shield that might result from corrosion or seismic damage. The flux through drip shield breaches is potentially split by the waste package, with some (or all) of the flux being diverted by the waste package and some passing through waste package breaches that might result from corrosion or seismic damage. Neither the drip shield nor the waste package survives an igneous intrusion, so the flux splitting submodel is not used in the igneous scenario class. The flow model is validated in an independent model validation technical review. The drip shield and waste package flux splitting algorithms are developed and validated using experimental data. The transport model considers

  17. Advanced turbine systems: Studies and conceptual design

    SciTech Connect

    van der Linden, S.; Gnaedig, G.; Kreitmeier, F.

    1993-11-01

    The ABB selection for the Advanced Turbine System (ATS) includes advanced developments especially in the hot gas path of the combustion turbine and new state-of-the-art units such as the steam turbine and the HRSG. The increase in efficiency by more than 10% multiplicative compared to current designs will be based on: (1) Turbine Inlet Temperature Increase; (2) New Cooling Techniques for Stationary and Rotating Parts; and New Materials. Present, projected component improvements that will be introduced with the above mentioned issues will yield improved CCSC turbine performance, which will drive the ATS selected gas-fired reference CC power plant to 6 % LHV or better. The decrease in emission levels requires a careful optimization of the cycle design, where cooling air consumption has to be minimized. All interfaces of the individual systems in the complete CC Plant need careful checks, especially to avoid unnecessary margins in the individual designs. This study is an important step pointing out the feasibility of the ATS program with realistic goals set by DOE, which, however, will present challenges for Phase II time schedule of 18 months. With the approach outlined in this study and close cooperation with DOE, ATS program success can be achieved to deliver low emissions and low cost of electricity by the year 2002. The ABB conceptual design and step approach will lead to early component demonstration which will help accelerate the overall program objectives.

  18. Theoretical studies on the kinetics of hydrogen abstraction reactions of H and CH3 radicals from CH3OCH3 and some of their H/D isotopologues.

    PubMed

    Saheb, Vahid

    2015-05-21

    The hydrogen abstraction reactions by H and CH3 radicals from CH3OCH3 and some of their H/D isotopologues are studied by semiclassical transition state theory. Many high-level density functional, ab initio, and combinatory quantum chemical methods, including B3LYP, BB1K, MP2, MP4, CCSD(T), CBS-Q, and G4 methods, are employed to compute the energies and rovibrational properties of the stationary points for the title reactions. Xij vibrational anharmonicity coefficients, used in semiclassical transition state theory, are computed at the B3LYP, BB1K, and MP2 levels of theory. Thermal rate coefficients and kinetic isotope effects are computed over the temperature range from 200 to 2500 K and compared with available experimental data. The computed rate constants for the title reactions are represented as the equation k(T) = ATn exp[−E(T + T0)/(T2 + T02)]. PMID:25873440

  19. Electrostatic camera system functional design study

    NASA Technical Reports Server (NTRS)

    Botticelli, R. A.; Cook, F. J.; Moore, R. F.

    1972-01-01

    A functional design study for an electrostatic camera system for application to planetary missions is presented. The electrostatic camera can produce and store a large number of pictures and provide for transmission of the stored information at arbitrary times after exposure. Preliminary configuration drawings and circuit diagrams for the system are illustrated. The camera system's size, weight, power consumption, and performance are characterized. Tradeoffs between system weight, power, and storage capacity are identified.

  20. Conceptual design studies for surface infrastructure

    NASA Technical Reports Server (NTRS)

    Bufkin, Ann L.; Jones, William R., II

    1986-01-01

    The utimate design of a manned Mars base will be the result of considerable engineering analysis and many trade studies to optimize the configuration. Many options and scenarios are available and all need to be considered at this time. Initial base elements, two base configuration concepts, internal space architectural concerns, and two base set-up scenarios are discussed. There are many variables as well as many unknowns to be reckoned with before people set foot on the red planet.

  1. A LARI Experience (Abstract)

    NASA Astrophysics Data System (ADS)

    Cook, M.

    2015-12-01

    (Abstract only) In 2012, Lowell Observatory launched The Lowell Amateur Research Initiative (LARI) to formally involve amateur astronomers in scientific research by bringing them to the attention of and helping professional astronomers with their astronomical research. One of the LARI projects is the BVRI photometric monitoring of Young Stellar Objects (YSOs), wherein amateurs obtain observations to search for new outburst events and characterize the colour evolution of previously identified outbursters. A summary of the scientific and organizational aspects of this LARI project, including its goals and science motivation, the process for getting involved with the project, a description of the team members, their equipment and methods of collaboration, and an overview of the programme stars, preliminary findings, and lessons learned is presented.

  2. IEEE conference record -- Abstracts

    SciTech Connect

    Not Available

    1994-01-01

    This conference covers the following areas: computational plasma physics; vacuum electronic; basic phenomena in fully ionized plasmas; plasma, electron, and ion sources; environmental/energy issues in plasma science; space plasmas; plasma processing; ball lightning/spherical plasma configurations; plasma processing; fast wave devices; magnetic fusion; basic phenomena in partially ionized plasma; dense plasma focus; plasma diagnostics; basic phenomena in weakly ionized gases; fast opening switches; MHD; fast z-pinches and x-ray lasers; intense ion and electron beams; laser-produced plasmas; microwave plasma interactions; EM and ETH launchers; solid state plasmas and switches; intense beam microwaves; and plasmas for lighting. Separate abstracts were prepared for 416 papers in this conference.

  3. A Numerical Climate Observing Network Design Study

    NASA Technical Reports Server (NTRS)

    Stammer, Detlef

    2003-01-01

    This project was concerned with three related questions of an optimal design of a climate observing system: 1. The spatial sampling characteristics required from an ARGO system. 2. The degree to which surface observations from ARGO can be used to calibrate and test satellite remote sensing observations of sea surface salinity (SSS) as it is anticipated now. 3. The more general design of an climate observing system as it is required in the near future for CLIVAR in the Atlantic. An important question in implementing an observing system is that of the sampling density required to observe climate-related variations in the ocean. For that purpose this project was concerned with the sampling requirements for the ARGO float system, but investigated also other elements of a climate observing system. As part of this project we studied the horizontal and vertical sampling characteristics of a global ARGO system which is required to make it fully complementary to altimeter data with the goal to capture climate related variations on large spatial scales (less thanAttachment: 1000 km). We addressed this question in the framework of a numerical model study in the North Atlantic with an 1/6 horizontal resolution. The advantage of a numerical design study is the knowledge of the full model state. Sampled by a synthetic float array, model results will therefore allow to test and improve existing deployment strategies with the goal to make the system as optimal and cost-efficient as possible. Attachment: "Optimal observations for variational data assimilation".

  4. MRF study. Part 2: Antenna design

    NASA Technical Reports Server (NTRS)

    1976-01-01

    An assessment of the practical feasibility of the design and construction of an antenna to meet the requirements of a conceptual radar system is studied. Both the subscale antenna, nominally 5 by 4 meters in dimensions, and the full scale antenna, taken as nominally 18 by 4 meters in size, were considered. The examination of feasibility was from electrical, mechanical, and thermal standpoints. Fundamental, electrical, microwave design questions applying to both the subscale and the full scale antennas were considered in greater detail than questions of mechanical configuration and thermal design. Layouts were made in the development of preliminary configurations, along with a deployment method, for the subscale antenna in conjunction with an antenna cluster for alternate arrangements of the three pallet configuration. Implementation of the array and support structure and attachment of the array to the support and thermal provision was considered. Results show that a microwave design of antennas that incorporate traveling wave arrays can be effected with the beam scanned to 45 degrees in elevation without occurrence of higher order beams.

  5. Microgravity isolation system design: A case study

    NASA Technical Reports Server (NTRS)

    Hampton, R. D.; Knospe, C. R.; Allaire, P. E.; Grodsinsky, C. M.

    1994-01-01

    Many acceleration-sensitive, microgravity science experiments will require active vibration isolation from manned orbiters on which they will be mounted. The isolation problem, especially in the case of a tethered payload, is a complex three-dimensional one that is best suited to modern-control design methods. In this paper, extended H(sub 2) synthesis is used to design an active isolator (i.e., controller) for a realistic single-input-multiple-output (SIMO) microgravity vibration isolation problem. Complex mu-analysis methods are used to analyze the isolation system with respect to sensor, actuator, and umbilical uncertainties. The paper fully discusses the design process employed and the insights gained. This design case study provides a practical approach for isolation problems of greater complexity. Issues addressed include a physically intuitive state-space description of the system, disturbance and noise filters, filters for frequency weighting, and uncertainty models. The controlled system satisfies all the performance specifications and is robust with respect to model uncertainties.

  6. AFE ion mass spectrometer design study

    NASA Technical Reports Server (NTRS)

    Wright, Willie

    1989-01-01

    This final technical report covers the activities engaged in by the University of Texas at Dallas, Center for Space Sciences in conjunction with the NASA Langley Research Center, Systems Engineering Division in design studies directed towards defining a suitable ion mass spectrometer to determine the plasma parameter around the Aeroassisted Flight Experiment vehicle during passage through the earth's upper atmosphere. Additional studies relate to the use of a Langmuir probe to measure windward ion/electron concentrations and temperatures. Selected instrument inlet subsystems were tested in the NASA Ames Arc-Jet Facility.

  7. Teaching for Abstraction: A Model

    ERIC Educational Resources Information Center

    White, Paul; Mitchelmore, Michael C.

    2010-01-01

    This article outlines a theoretical model for teaching elementary mathematical concepts that we have developed over the past 10 years. We begin with general ideas about the abstraction process and differentiate between "abstract-general" and "abstract-apart" concepts. A 4-phase model of teaching, called Teaching for Abstraction, is then proposed…

  8. First LDEF Post-Retrieval Symposium abstracts

    NASA Technical Reports Server (NTRS)

    Levine, Arlene S. (Compiler)

    1991-01-01

    The LDE facility was designed to better understand the environments of space and the effects of prolonged exposure in these environments on future spacecraft. The symposium abstracts presented here are organized according to the symposium agenda into five sessions. The first session provides an overview of the LDEF, the experiments, the mission, and the natural and induced environments the spacecraft and experiments encountered during the mission. The second session presents results to date from studies to better define the environments of near-Earth space. The third session addresses studies of the effects of the space environments on spacecraft materials. The fourth session addresses studies of the effects of the space environments on spacecraft systems. And the fifth session addresses other subjects such as results of the LDEF life science and crystal growth experiments.

  9. Study of joint designing on composite structures

    NASA Astrophysics Data System (ADS)

    Kazushi, Haruna

    In this paper, strength design techniques of CFRP mechanical joints and adhesively bonded joints were examined. Remarkable stress concentration generates at the mechanical hole edge and the adhesive edge, therefore an unskillful design of joints often causes a reduction in the strength of composite structures. In mechanical joints, a study on predicting the joint strength has been performed, but bearing failure that is most important failure mode for designing joints can not be predicted. So in this paper, the strength prediction method in consideration with bearing failure was examined. On the other hand, the criterion using the intensity of stress singularity was suggested in adhesive joints, but it was clarified in this paper, that this method can not be applied the prediction of the final failure strength. So the critical stress distribution of single-lap adhesive bonded carbon/epoxy joints was examined to obtain the failure criterion of the final failure. Moreover the simulation method for an internal stress generated by cure shrinkage of adhesive was also examined. In the proposed method for mechanical joint, 2-parameter criterion, that is combined the characteristic length with the Yamada-Sun criterion, was applied and the characteristic length for compression was determined from "bearing failure test" that was newly conceived to take bearing failure into consideration. In case of adhesive joints, it was thought that 2-parameter criterion was effective. So the prediction method using 2-parameter criterion was applied to other adhesive joints. Good agreement was obtained between predicted and experimental results in both mechanical and adhesive joints. And it was cleared that an internal stress could be simulated by the proposed method. Moreover, in mechanical joints, the most suitable stacking sequence, the reduction technique of interlaminar stress, and the elevation of joint strength by application of high toughness matrix were also shown. Consequently

  10. Influence of study design in receiver operating characteristics studies: sequential versus independent reading

    PubMed Central

    Schalekamp, Steven; van Ginneken, Bram; Schaefer-Prokop, Cornelia M.; Karssemeijer, Nico

    2014-01-01

    Abstract. Observer studies to assess new image processing devices or computer-aided diagnosis techniques are often performed, but little is known about the effect of the study design on observer performance results. We investigated the effect of the sequential and independent reading design on observer study results with respect to reader performance and their statistical power. For this we performed an observer study for the detection of lung nodules with bone-suppressed images (BSIs) compared with original chest radiographs. In a fully crossed observer study, eight observers assessed a series of 300 radiographs four times, including one assessment of the original radiograph with sequential BSI and two independent reading sessions with BSI. Observer performance was compared using multireader multicase receiver operating characteristics. No significant difference between the effect of BSI in the sequential and the independent reading sessions could be found (p=0.09; p=0.46). Compared with the original radiographs, increased performance with BSI was significant in the sequential and one of the independent reading sessions (p<0.0001; p=0.0007), and nonsignificant in the other independent reading session (p=0.10). A strong increase of uncorrelated variance components was found in the independent reading sessions, masking the ability to demonstrate differences in observer performance across modalities. Therefore, the sequential reading design is the preferred design because it is less burdensome and has more statistical power. PMID:26158028

  11. Automated Supernova Discovery (Abstract)

    NASA Astrophysics Data System (ADS)

    Post, R. S.

    2015-12-01

    (Abstract only) We are developing a system of robotic telescopes for automatic recognition of Supernovas as well as other transient events in collaboration with the Puckett Supernova Search Team. At the SAS2014 meeting, the discovery program, SNARE, was first described. Since then, it has been continuously improved to handle searches under a wide variety of atmospheric conditions. Currently, two telescopes are used to build a reference library while searching for PSN with a partial library. Since data is taken every night without clouds, we must deal with varying atmospheric and high background illumination from the moon. Software is configured to identify a PSN, reshoot for verification with options to change the run plan to acquire photometric or spectrographic data. The telescopes are 24-inch CDK24, with Alta U230 cameras, one in CA and one in NM. Images and run plans are sent between sites so the CA telescope can search while photometry is done in NM. Our goal is to find bright PSNs with magnitude 17.5 or less which is the limit of our planned spectroscopy. We present results from our first automated PSN discoveries and plans for PSN data acquisition.

  12. Stellar Presentations (Abstract)

    NASA Astrophysics Data System (ADS)

    Young, D.

    2015-12-01

    (Abstract only) The AAVSO is in the process of expanding its education, outreach and speakers bureau program. powerpoint presentations prepared for specific target audiences such as AAVSO members, educators, students, the general public, and Science Olympiad teams, coaches, event supervisors, and state directors will be available online for members to use. The presentations range from specific and general content relating to stellar evolution and variable stars to specific activities for a workshop environment. A presentation—even with a general topic—that works for high school students will not work for educators, Science Olympiad teams, or the general public. Each audience is unique and requires a different approach. The current environment necessitates presentations that are captivating for a younger generation that is embedded in a highly visual and sound-bite world of social media, twitter and U-Tube, and mobile devices. For educators, presentations and workshops for themselves and their students must support the Next Generation Science Standards (NGSS), the Common Core Content Standards, and the Science Technology, Engineering and Mathematics (STEM) initiative. Current best practices for developing relevant and engaging powerpoint presentations to deliver information to a variety of targeted audiences will be presented along with several examples.

  13. VXIbus data collection system -- A design study

    SciTech Connect

    Hacker, U.; Richter, B.; Weinert, A.; Arlt, R.; Lewis, W.; Swinhoe, M.

    1995-12-31

    The German support program has sponsored the work to investigate the VXIbus as integration platform for safeguards instrumentation. This paper will cover the analysis of the user requirements for a VXIbus based monitoring system for integrated safeguards -- primarily for reliable unattended in-field collection of large amounts of data. The goal is to develop a suitable system architecture. The design of the system makes use of the VXIbus standard as the selected hardware platform Based upon the requirement analysis and the overriding need for high reliability and robustness, a systematic investigation of different operating system options, as well as development and integration tools will be considered. For the software implementation cycle high and low level programming tools are required. The identification of the constraints for the programming platform and the tool selection will be presented. Both the strategic approach, the rules for analysis and design work as well as the executive components for the support of the implementation and production cycle are given. Here all the conditions for reliable, unattended and integrated safeguards monitoring systems will be addressed. The definition of the basic and advanced design principles are covered. The paper discusses the results of a study on a system produced to demonstrate a high data rate timer/counter application.

  14. Advanced Subsonic Airplane Design and Economic Studies

    NASA Technical Reports Server (NTRS)

    Liebeck, Robert H.; Andrastek, Donald A.; Chau, Johnny; Girvin, Raquel; Lyon, Roger; Rawdon, Blaine K.; Scott, Paul W.; Wright, Robert A.

    1995-01-01

    A study was made to examine the effect of advanced technology engines on the performance of subsonic airplanes and provide a vision of the potential which these advanced engines offered. The year 2005 was selected as the entry-into-service (EIS) date for engine/airframe combination. A set of four airplane classes (passenger and design range combinations) that were envisioned to span the needs for the 2005 EIS period were defined. The airframes for all classes were designed and sized using 2005 EIS advanced technology. Two airplanes were designed and sized for each class: one using current technology (1995) engines to provide a baseline, and one using advanced technology (2005) engines. The resulting engine/airframe combinations were compared and evaluated on the basis on sensitivity to basic engine performance parameters (e.g. SFC and engine weight) as well as DOC+I. The advanced technology engines provided significant reductions in fuel burn, weight, and wing area. Average values were as follows: reduction in fuel burn = 18%, reduction in wing area = 7%, and reduction in TOGW = 9%. Average DOC+I reduction was 3.5% using the pricing model based on payload-range index and 5% using the pricing model based on airframe weight. Noise and emissions were not considered.

  15. National accounts manager: Design study. Final report

    SciTech Connect

    Waggoner, J.

    1998-09-01

    This document addresses a typical application -- that of a hypothetical nationwide chain of restaurants. The design study uses the Reference Model for Open Distributed Processing (RM-ODP) as a guideline for specifying standard systems. Far from limiting the study`s usefulness to a particular type of National Account, this guideline is highly portable, and will be useful, with slight modifications only, in similarly specifying systems for other types of customers. A brief list of other applications could include many ``campus`` environments -- government agencies and university systems as well as manufacturers, airports, railyards, ski resorts, apartment complexes, hotels, hospitals, telecommunication facilities, oil fields, irrigation systems, municipal water/sewer systems, and so on.

  16. Protecting count queries in study design

    PubMed Central

    Sarwate, Anand D; Boxwala, Aziz A

    2012-01-01

    Objective Today's clinical research institutions provide tools for researchers to query their data warehouses for counts of patients. To protect patient privacy, counts are perturbed before reporting; this compromises their utility for increased privacy. The goal of this study is to extend current query answer systems to guarantee a quantifiable level of privacy and allow users to tailor perturbations to maximize the usefulness according to their needs. Methods A perturbation mechanism was designed in which users are given options with respect to scale and direction of the perturbation. The mechanism translates the true count, user preferences, and a privacy level within administrator-specified bounds into a probability distribution from which the perturbed count is drawn. Results Users can significantly impact the scale and direction of the count perturbation and can receive more accurate final cohort estimates. Strong and semantically meaningful differential privacy is guaranteed, providing for a unified privacy accounting system that can support role-based trust levels. This study provides an open source web-enabled tool to investigate visually and numerically the interaction between system parameters, including required privacy level and user preference settings. Conclusions Quantifying privacy allows system administrators to provide users with a privacy budget and to monitor its expenditure, enabling users to control the inevitable loss of utility. While current measures of privacy are conservative, this system can take advantage of future advances in privacy measurement. The system provides new ways of trading off privacy and utility that are not provided in current study design systems. PMID:22511018

  17. CONCEPTUAL DESIGN STUDY OF HORN POWER SUPPLY.

    SciTech Connect

    ZHANG,W.; SANDBERG,J.; WENG,W.T.

    2003-06-16

    A 250 kA pulsed power supply is required for the focusing horn of the proposed Brookhaven AGS Super Neutrino Beam Facility for long baseline neutrino oscillation experiment. It is expected to pulse at 2.5 Hz repetition rate. A preliminary study is being conducted to explore the key issues associated with the power supply system design. Advanced technologies used in similar systems as well as new ideas are being examined, simulated and evaluated. This power supply will be a very high stored energy, high average power, and high peak power system.

  18. Study of wrap-rib antenna design

    NASA Technical Reports Server (NTRS)

    Wade, W. D.; Sinha, A.; Singh, R.

    1979-01-01

    The results of a parametric design study conducted to develop the significant characteristics and technology limitations of space deployable antenna systems with aperture sizes ranging from 50 up to 300 m and F/D ratios between 0.5 and 3.0 are presented. Wrap/rib type reflectors of both the prime and offset fed geometry and associated feed support structures were considered. The significant constraints investigated as limitations on achievable aperture were inherent manufacturability, orbit dynamic and thermal stability, antenna weight, and antenna stowed volume. A data base, resulting in the defined maximum achievable aperture size as a function of diameter, frequency and estimated cost, was formed.

  19. Design Study: Rocket Based MHD Generator

    NASA Technical Reports Server (NTRS)

    1997-01-01

    This report addresses the technical feasibility and design of a rocket based MHD generator using a sub-scale LOx/RP rocket motor. The design study was constrained by assuming the generator must function within the performance and structural limits of an existing magnet and by assuming realistic limits on (1) the axial electric field, (2) the Hall parameter, (3) current density, and (4) heat flux (given the criteria of heat sink operation). The major results of the work are summarized as follows: (1) A Faraday type of generator with rectangular cross section is designed to operate with a combustor pressure of 300 psi. Based on a magnetic field strength of 1.5 Tesla, the electrical power output from this generator is estimated to be 54.2 KW with potassium seed (weight fraction 3.74%) and 92 KW with cesium seed (weight fraction 9.66%). The former corresponds to a enthalpy extraction ratio of 2.36% while that for the latter is 4.16%; (2) A conceptual design of the Faraday MHD channel is proposed, based on a maximum operating time of 10 to 15 seconds. This concept utilizes a phenolic back wall for inserting the electrodes and inter-electrode insulators. Copper electrode and aluminum oxide insulator are suggested for this channel; and (3) A testing configuration for the sub-scale rocket based MHD system is proposed. An estimate of performance of an ideal rocket based MHD accelerator is performed. With a current density constraint of 5 Amps/cm(exp 2) and a conductivity of 30 Siemens/m, the push power density can be 250, 431, and 750 MW/m(sup 3) when the induced voltage uB have values of 5, 10, and 15 KV/m, respectively.

  20. Foundations of the Bandera Abstraction Tools

    NASA Technical Reports Server (NTRS)

    Hatcliff, John; Dwyer, Matthew B.; Pasareanu, Corina S.; Robby

    2003-01-01

    Current research is demonstrating that model-checking and other forms of automated finite-state verification can be effective for checking properties of software systems. Due to the exponential costs associated with model-checking, multiple forms of abstraction are often necessary to obtain system models that are tractable for automated checking. The Bandera Tool Set provides multiple forms of automated support for compiling concurrent Java software systems to models that can be supplied to several different model-checking tools. In this paper, we describe the foundations of Bandera's data abstraction mechanism which is used to reduce the cardinality (and the program's state-space) of data domains in software to be model-checked. From a technical standpoint, the form of data abstraction used in Bandera is simple, and it is based on classical presentations of abstract interpretation. We describe the mechanisms that Bandera provides for declaring abstractions, for attaching abstractions to programs, and for generating abstracted programs and properties. The contributions of this work are the design and implementation of various forms of tool support required for effective application of data abstraction to software components written in a programming language like Java which has a rich set of linguistic features.

  1. 2013 SYR Accepted Poster Abstracts.

    PubMed

    2013-01-01

    SYR 2013 Accepted Poster abstracts: 1. Benefits of Yoga as a Wellness Practice in a Veterans Affairs (VA) Health Care Setting: If You Build It, Will They Come? 2. Yoga-based Psychotherapy Group With Urban Youth Exposed to Trauma. 3. Embodied Health: The Effects of a Mind�Body Course for Medical Students. 4. Interoceptive Awareness and Vegetable Intake After a Yoga and Stress Management Intervention. 5. Yoga Reduces Performance Anxiety in Adolescent Musicians. 6. Designing and Implementing a Therapeutic Yoga Program for Older Women With Knee Osteoarthritis. 7. Yoga and Life Skills Eating Disorder Prevention Among 5th Grade Females: A Controlled Trial. 8. A Randomized, Controlled Trial Comparing the Impact of Yoga and Physical Education on the Emotional and Behavioral Functioning of Middle School Children. 9. Feasibility of a Multisite, Community based Randomized Study of Yoga and Wellness Education for Women With Breast Cancer Undergoing Chemotherapy. 10. A Delphi Study for the Development of Protocol Guidelines for Yoga Interventions in Mental Health. 11. Impact Investigation of Breathwalk Daily Practice: Canada�India Collaborative Study. 12. Yoga Improves Distress, Fatigue, and Insomnia in Older Veteran Cancer Survivors: Results of a Pilot Study. 13. Assessment of Kundalini Mantra and Meditation as an Adjunctive Treatment With Mental Health Consumers. 14. Kundalini Yoga Therapy Versus Cognitive Behavior Therapy for Generalized Anxiety Disorder and Co-Occurring Mood Disorder. 15. Baseline Differences in Women Versus Men Initiating Yoga Programs to Aid Smoking Cessation: Quitting in Balance Versus QuitStrong. 16. Pranayam Practice: Impact on Focus and Everyday Life of Work and Relationships. 17. Participation in a Tailored Yoga Program is Associated With Improved Physical Health in Persons With Arthritis. 18. Effects of Yoga on Blood Pressure: Systematic Review and Meta-analysis. 19. A Quasi-experimental Trial of a Yoga based Intervention to Reduce Stress and

  2. Abstraction of Drift Seepage

    SciTech Connect

    J.T. Birkholzer

    2004-11-01

    This model report documents the abstraction of drift seepage, conducted to provide seepage-relevant parameters and their probability distributions for use in Total System Performance Assessment for License Application (TSPA-LA). Drift seepage refers to the flow of liquid water into waste emplacement drifts. Water that seeps into drifts may contact waste packages and potentially mobilize radionuclides, and may result in advective transport of radionuclides through breached waste packages [''Risk Information to Support Prioritization of Performance Assessment Models'' (BSC 2003 [DIRS 168796], Section 3.3.2)]. The unsaturated rock layers overlying and hosting the repository form a natural barrier that reduces the amount of water entering emplacement drifts by natural subsurface processes. For example, drift seepage is limited by the capillary barrier forming at the drift crown, which decreases or even eliminates water flow from the unsaturated fractured rock into the drift. During the first few hundred years after waste emplacement, when above-boiling rock temperatures will develop as a result of heat generated by the decay of the radioactive waste, vaporization of percolation water is an additional factor limiting seepage. Estimating the effectiveness of these natural barrier capabilities and predicting the amount of seepage into drifts is an important aspect of assessing the performance of the repository. The TSPA-LA therefore includes a seepage component that calculates the amount of seepage into drifts [''Total System Performance Assessment (TSPA) Model/Analysis for the License Application'' (BSC 2004 [DIRS 168504], Section 6.3.3.1)]. The TSPA-LA calculation is performed with a probabilistic approach that accounts for the spatial and temporal variability and inherent uncertainty of seepage-relevant properties and processes. Results are used for subsequent TSPA-LA components that may handle, for example, waste package corrosion or radionuclide transport.

  3. Studying the Effectiveness of Conceptual Design in Secondary Design and Technology in England

    ERIC Educational Resources Information Center

    Trebell, Donna

    2013-01-01

    The purpose of the study reported here was to investigate the effectiveness of a conceptual design unit as part of the Design and Technology curriculum for 14 years old pupils in England. One research question drove this study: What sort of designing do pupils do when they design without having to make what they have designed? Data consisted of…

  4. Advanced heat receiver conceptual design study

    NASA Technical Reports Server (NTRS)

    Kesseli, James; Saunders, Roger; Batchelder, Gary

    1988-01-01

    Solar Dynamic space power systems are candidate electrical power generating systems for future NASA missions. One of the key components of the solar dynamic power system is the solar receiver/thermal energy storage (TES) subsystem. Receiver development was conducted by NASA in the late 1960's and since then a very limited amount of work has been done in this area. Consequently the state of the art (SOA) receivers designed for the IOC space station are large and massive. The objective of the Advanced Heat Receiver Conceptual Design Study is to conceive and analyze advanced high temperature solar dynamic Brayton and Stirling receivers. The goal is to generate innovative receiver concepts that are half of the mass, smaller, and more efficient than the SOA. It is also necessary that these innovative receivers offer ease of manufacturing, less structural complexity and fewer thermal stress problems. Advanced Brayton and Stirling receiver storage units are proposed and analyzed in this study which can potentially meet these goals.

  5. Abstracting in the Context of Spontaneous Learning

    ERIC Educational Resources Information Center

    Williams, Gaye

    2007-01-01

    There is evidence that spontaneous learning leads to relational understanding and high positive affect. To study spontaneous abstracting, a model was constructed by combining the RBC model of abstraction with Krutetskii's mental activities. Using video-stimulated interviews, the model was then used to analyze the behavior of two Year 8 students…

  6. Writing Abstracts for Free-Text Searching.

    ERIC Educational Resources Information Center

    Fidel, Raya

    1986-01-01

    This study surveyed abstracting policies and guidelines used by producers of bibliographic databases that aim to enhance free-text retrieval. Results indicate editors consider content of abstracts and their language as primary factors in retrieval enhancement. Most recommend that concepts and form be coordinated with controlled vocabulary…

  7. Analysis of complex networks using aggressive abstraction.

    SciTech Connect

    Colbaugh, Richard; Glass, Kristin.; Willard, Gerald

    2008-10-01

    This paper presents a new methodology for analyzing complex networks in which the network of interest is first abstracted to a much simpler (but equivalent) representation, the required analysis is performed using the abstraction, and analytic conclusions are then mapped back to the original network and interpreted there. We begin by identifying a broad and important class of complex networks which admit abstractions that are simultaneously dramatically simplifying and property preserving - we call these aggressive abstractions -- and which can therefore be analyzed using the proposed approach. We then introduce and develop two forms of aggressive abstraction: 1.) finite state abstraction, in which dynamical networks with uncountable state spaces are modeled using finite state systems, and 2.) onedimensional abstraction, whereby high dimensional network dynamics are captured in a meaningful way using a single scalar variable. In each case, the property preserving nature of the abstraction process is rigorously established and efficient algorithms are presented for computing the abstraction. The considerable potential of the proposed approach to complex networks analysis is illustrated through case studies involving vulnerability analysis of technological networks and predictive analysis for social processes.

  8. Advance Organizers: Concret Versus Abstract.

    ERIC Educational Resources Information Center

    Corkill, Alice J.; And Others

    1988-01-01

    Two experiments examined the relative effects of concrete and abstract advance organizers on students' memory for subsequent prose. Results of the experiments are discussed in terms of the memorability, familiarity, and visualizability of concrete and abstract verbal materials. (JD)

  9. Accepted scientific research works (abstracts).

    PubMed

    2014-01-01

    These are the 39 accepted abstracts for IAYT's Symposium on Yoga Research (SYR) September 24-24, 2014 at the Kripalu Center for Yoga & Health and published in the Final Program Guide and Abstracts. PMID:25645134

  10. Advanced EVA system design requirements study

    NASA Technical Reports Server (NTRS)

    Woods, T. G.

    1988-01-01

    The results are presented of a study to identify specific criteria regarding space station extravehicular activity system (EVAS) hardware requirements. Key EVA design issues include maintainability, technology readiness, LSS volume vs. EVA time available, suit pressure/cabin pressure relationship and productivity effects, crew autonomy, integration of EVA as a program resource, and standardization of task interfaces. A variety of DOD EVA systems issues were taken into consideration. Recommendations include: (1) crew limitations, not hardware limitations; (2) capability to perform all of 15 generic missions; (3) 90 days on-orbit maintainability with 50 percent duty cycle as minimum; and (4) use by payload sponsors of JSC document 10615A plus a Generic Tool Kit and Specialized Tool Kit description. EVA baseline design requirements and criteria, including requirements of various subsystems, are outlined. Space station/EVA system interface requirements and EVA accommodations are discussed in the areas of atmosphere composition and pressure, communications, data management, logistics, safe haven, SS exterior and interior requirements, and SS airlock.

  11. Tubular copper thrust chamber design study

    NASA Technical Reports Server (NTRS)

    Masters, A. I.; Galler, D. E.

    1992-01-01

    The use of copper tubular thrust chambers is particularly important in high performance expander cycle space engines. Tubular chambers have more surface area than flat wall chambers, and this extra surface area provides enhanced heat transfer for additional energy to power the cycle. This paper was divided into two sections: (1) a thermal analysis and sensitivity study; and (2) a preliminary design of a selected thrust chamber configuration. The thermal analysis consisted of a statistical optimization to determine the optimum tube geometry, tube booking, thrust chamber geometry, and cooling routing to achieve the maximum upper limit chamber pressure for a 25,000 pound thrust engine. The preliminary design effort produced a layout drawing of a tubular thrust chamber that is three inches shorter than the Advanced Expander Test Bed (AETB) milled channel chamber but is predicted to provide a five percent increase in heat transfer. Testing this chamber in the AETB would confirm the inherent advantages of tubular chamber construction and heat transfer.

  12. Next Step Spherical Torus Design Studies

    SciTech Connect

    C. Neumeyer; P. Heitzenroeder; C. Kessel; M. Ono; M. Peng; J. Schmidt; R. Woolley; I. Zatz

    2002-11-08

    Studies are underway to identify and characterize a design point for a Next Step Spherical Torus (NSST) experiment. This would be a ''Proof of Performance'' device which would follow and build upon the successes of the National Spherical Torus Experiment (NSTX) a ''Proof of Principle'' device which has operated at PPPL since 1999. With the Decontamination and Decommissioning (D&D) of the Tokamak Fusion Test Reactor (TFTR) nearly completed, the TFTR test cell and facility will soon be available for a device such as NSST. By utilizing the TFTR test cell, NSST can be constructed for a relatively low cost on a short time scale. In addition, while furthering spherical torus (ST) research, this device could achieve modest fusion power gain for short-pulse lengths, a significant step toward future large burning plasma devices now under discussion in the fusion community. The selected design point is Q=2 at HH=1.4, P subscript ''fusion''=60 MW, 5 second pulse, with R subscript ''0''=1.5 m, A=1.6, I subscript ''p''=10vMA, B subscript ''t''=2.6 T, CS flux=16 weber. Most of the research would be conducted in D-D, with a limited D-T campaign during the last years of the program.

  13. Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 2: The design process

    NASA Technical Reports Server (NTRS)

    Gillette, W. B.; Turner, M. J.; Southall, J. W.; Whitener, P. C.; Kowalik, J. S.

    1973-01-01

    The extent to which IPAD is to support the design process is identified. Case studies of representative aerospace products were developed as models to characterize the design process and to provide design requirements for the IPAD computing system.

  14. Design study of prestressed rotor spar concept

    NASA Technical Reports Server (NTRS)

    Gleich, D.

    1980-01-01

    Studies on the Bell Helicopter 540 Rotor System of the AH-1G helicopter were performed. The stiffness, mass and geometric configurations of the Bell blade were matched to give a dynamically similar prestressed composite blade. A multi-tube, prestressed composite spar blade configuration was designed for superior ballistic survivability at low life cycle cost. The composite spar prestresses, imparted during fabrication, are chosen to maintain compression in the high strength cryogenically stretchformed 304-L stainless steel liner and tension in the overwrapped HTS graphite fibers under operating loads. This prestressing results in greatly improved crack propagation and fatigue resistance as well as enhanced fiber stiffness properties. Advantages projected for the prestressed composite rotor spar concept include increased operational life and improved ballistic survivability at low life cycle cost.

  15. Preliminary systems design study assessment report

    SciTech Connect

    Mayberry, J.L.; Feizollahi, F.; Del Signore, J.C.

    1991-10-01

    The System Design Study (SDS), part of the Waste Technology Development Department of the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex's Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each concept. The SDS results are published in eight volumes. Volume I contains an executive summary. The SDS summary and analysis of results are presented in Volume II. Volumes III through VII contain descriptions of twelve system and four subsystem concepts. Volume VIII contains the appendixes.

  16. Photovoltaic module electrical termination design requirement study

    SciTech Connect

    Mosna, F.J. Jr.; Donlinger, J.

    1980-07-01

    Motorola Inc., in conjunction with ITT Cannon, has conducted a study to develop information to facilitate the selection of existing, commercial, electrical termination hardware for photovoltaic modules and arrays. This volume of the report contains the executive summary. Module and array design parameters were investigated and recommendations were developed for use in surveying, evaluating, and comparing electrical termination hardware. Electrical termination selection criteria factors were developed and applied to nine generic termination types in each of the four application sectors: remote, residential, intermediate and industrial. Existing terminations best suited for photovoltaic modules and arrays were identified. Cost information was developed to identify cost drivers and/or requirements which might lead to cost reductions. The general conclusion is that there is no single generic termination that is best suited for photovoltaic application, but that the appropriate termination is strongly dependent upon the module construction and its support structure as well as the specific application sector.

  17. Space shuttle visual simulation system design study

    NASA Technical Reports Server (NTRS)

    1973-01-01

    A recommendation and a specification for the visual simulation system design for the space shuttle mission simulator are presented. A recommended visual system is described which most nearly meets the visual design requirements. The cost analysis of the recommended system covering design, development, manufacturing, and installation is reported. Four alternate systems are analyzed.

  18. The microwave radiometer spacecraft: A design study

    NASA Technical Reports Server (NTRS)

    Wright, R. L. (Editor)

    1981-01-01

    A large passive microwave radiometer spacecraft with near all weather capability of monitoring soil moisture for global crop forecasting was designed. The design, emphasizing large space structures technology, characterized the mission hardware at the conceptual level in sufficient detail to identify enabling and pacing technologies. Mission and spacecraft requirements, design and structural concepts, electromagnetic concepts, and control concepts are addressed.

  19. Chicago Healthy Aging Study: Objectives and Design

    PubMed Central

    Pirzada, Amber; Reid, Kathryn; Kim, Daniel; Garside, Daniel B.; Lu, Brandon; Vu, Thanh-Huyen T.; Lloyd-Jones, Donald M.; Zee, Phyllis; Liu, Kiang; Stamler, Jeremiah; Daviglus, Martha L.

    2013-01-01

    Investigators in the Chicago Healthy Aging Study (CHAS) reexamined 1,395 surviving participants aged 65–84 years (28% women) from the Chicago Heart Association Detection Project in Industry (CHA) 1967–1973 cohort whose cardiovascular disease (CVD) risk profiles were originally ascertained at ages 25–44 years. CHAS investigators reexamined 421 participants who were low-risk (LR) at baseline and 974 participants who were non-LR at baseline. LR was defined as having favorable levels of 4 major CVD risk factors: serum total cholesterol level <200 mg/dL and no use of cholesterol-lowering medication; blood pressure 120/≤80 mm Hg and no use of antihypertensive medication; no current smoking; and no history of diabetes or heart attack. While the potential of LR status in overcoming the CVD epidemic is being recognized, the long-term association of LR with objectively measured health in older age has not been examined. It is hypothesized that persons who were LR in 1967–1973 and have survived to older age will have less clinical and subclinical CVD, lower levels of inflammatory markers, and better physical performance/functioning and sleep quality. Here we describe the rationale, objectives, design, and implementation of this longitudinal epidemiologic study, compare baseline and follow-up characteristics of participants and nonparticipants, and highlight the feasibility of reexamining study participants after an extended period postbaseline with minimal interim contact. PMID:23669655

  20. Design study status of compact containment BWR

    SciTech Connect

    Heki, H.; Nakamaru, M.; Kuroki, M.; Kojima, Y.; Arai, K.; Tahara, M.; Hoshi, T.

    2006-07-01

    The reactor concept considered in this paper has a relatively mid/small power output, a compact containment and a simplified BWR configuration with comprehensive safety features. The Japan Atomic Power Company has been taking initiative in developing the concept of the Compact Containment Boiling Water Reactor (CCR). The CCR., which is being developed with matured BWR technologies together with innovative systems/components, is expected to prove attractive in the world energy markets due to its flexibility in regard to energy demands and site conditions, its high potential for reducing investment risk and its safety features facilitating public acceptance. The flexibility is achieved by CCR's relatively mid/small power output of 400 MWe class and capability of long operating cycle (refueling intervals). CCR is expected to be attractive from view point of investment due to its simplification/innovation in design such as natural circulation core cooling with the bottom located short core, upper entry control rod drives (CRDs) and simplified safety system with high pressure resistible containment concept. The natural circulation core eliminates recirculation pumps and the maintenance of such pumps. The upper entry CRDs enable a simplified safety system followed by in-vessel retention (IVR) capability with the compact primary containment vessel (PCV). The safety features mainly consist of large water inventory above the core without large penetration of RPV below the top of the core height, passive cooling system by isolation condenser (IC). The large inventory increases the system response time in the case of design-base accidents, including loss of coolant accidents. The IC suppresses PCV pressure by steam condensation without any AC power. Cooling the molten core inside the RPV if the core should be damaged by loss of core coolability could attain the IVR. Further core design study has been carried out taking into account compact reactor size and reduction of fuel

  1. HEALTHY study rationale, design and methods

    PubMed Central

    2009-01-01

    The HEALTHY primary prevention trial was designed and implemented in response to the growing numbers of children and adolescents being diagnosed with type 2 diabetes. The objective was to moderate risk factors for type 2 diabetes. Modifiable risk factors measured were indicators of adiposity and glycemic dysregulation: body mass index ≥85th percentile, fasting glucose ≥5.55 mmol l-1 (100 mg per 100 ml) and fasting insulin ≥180 pmol l-1 (30 μU ml-1). A series of pilot studies established the feasibility of performing data collection procedures and tested the development of an intervention consisting of four integrated components: (1) changes in the quantity and nutritional quality of food and beverage offerings throughout the total school food environment; (2) physical education class lesson plans and accompanying equipment to increase both participation and number of minutes spent in moderate-to-vigorous physical activity; (3) brief classroom activities and family outreach vehicles to increase knowledge, enhance decision-making skills and support and reinforce youth in accomplishing goals; and (4) communications and social marketing strategies to enhance and promote changes through messages, images, events and activities. Expert study staff provided training, assistance, materials and guidance for school faculty and staff to implement the intervention components. A cohort of students were enrolled in sixth grade and followed to end of eighth grade. They attended a health screening data collection at baseline and end of study that involved measurement of height, weight, blood pressure, waist circumference and a fasting blood draw. Height and weight were also collected at the end of the seventh grade. The study was conducted in 42 middle schools, six at each of seven locations across the country, with 21 schools randomized to receive the intervention and 21 to act as controls (data collection activities only). Middle school was the unit of sample size and

  2. Direct ab initio dynamics studies on the hydrogen-abstraction reactions of OH radicals with HOX (X = F, Cl, and Br).

    PubMed

    Wang, Li; Liu, Jing-Yao; Li, Ze-Sheng; Sun, Chia-Chung

    2004-03-01

    The hydrogen abstract reactions of OH radicals with HOF (R1), HOCl (R2), and HOBr (R3) have been studied systematically by a dual-level direct-dynamics method. The geometries and frequencies of all the stationary points are optimized at the MP2/6-311+G(2d, 2p) level of theory. A hydrogen-bonded complex is located at the product channel for the OH + HOBr reaction. To improve the energetics information along the minimum energy path (MEP), single-point energy calculations are carried out at the CCSD(T)/6-311++G(3df, 3pd) level of theory. Interpolated single-point energy (ISPE) method is employed to correct the energy profiles for the three reactions. It is found that neither the barrier heights (DeltaE) nor the H-O bond dissociation energies [D(H-O)] exhibit any clear-cut linear correlations with the halogen electronegative. The decrease of DeltaE and D(H-O) for the three reactions are in order of HOF > HOBr > HOCl. Rate constants for each reaction are calculated by canonical variational transition-state theory (CVT) with a small-curvature tunneling correction (SCT) within 200-2000 K. The agreement of the rate constants with available experimental values for reactions R2 and R3 at 298 K is good. Our results show that the variational effect is small while the tunneling correction has an important contribution in the calculation of rate constants in the low-temperature range. Due to the lack of the kinetic data of these reactions, the present theoretical results are expected to be useful and reasonable to estimate the dynamical properties of these reactions over a wide temperature range where no experimental value is available. PMID:14735573

  3. Case studies in alternative landfill design

    SciTech Connect

    Barbagallo, J.C.; Druback, G.W.

    1995-12-31

    In the past, landfills or {open_quotes}dumps{close_quotes} were not highly regulated and typically did not require a detailed engineering design. However, landfills are no longer just holes in the ground, and landfill closures entail more than just spreading some dirt on top of piles of garbage. Today landfill design is a highly regulated, complex design effort that integrates soils and geosynthetics into systems aimed at providing long-term protection for the environment and surrounding communities. Integrating these complex design systems into the available landscape and exising landfill configuration often requires the designer go beyond the {open_quotes}typical{close_quotes} landfill and landfill closure design to satisfy regulations and provide cost-effective solutions.

  4. Front Range Report, Abstracts

    NASA Astrophysics Data System (ADS)

    Spence, William

    The second regional conference of the Front Range Branch, AGU, was attended by more than 80 professionals and some 20 outstanding high school students. The conference included 2 days of interdisciplinary talks, and lots of discussion, that primarily were keyed to geophysical studies of Colorado, Wyoming, and New Mexico. Other talks reported on nonregional, and sometimes global, studies being done by geophypsicists of the Front Range region.Topics included tectonics of the Front Range and the Colorado Plateau, pollution of the Arkansas and Mississippi rivers, and a supreme polluting event that caused the late-Cretaceous extinctions. Other notable talks were on toxic cleanup, microburst (wind shear) detection at U.S. airports, and other meteorological studies. Several talks treated the audience to the excitement of new work and surprise discoveries. The meeting was multimedia, including the playing of two videos through a projection TV and the playing of a fascinating tape between an airport control tower and incoming pilots during a severe microburst event.

  5. Design study of the storage ring EUTERPE

    NASA Astrophysics Data System (ADS)

    Xi, Boling; Botman, J. I. M.; Timmermans, C. J.; Hagedoorn, H. L.

    1992-05-01

    At present the 400 MeV electron storage ring EUTERPE is being constructed at the Eindhoven University of Technology. It is a university project set up for studies of charged particle beam dynamics and applications of synchroton radiation, and for the education of students in these fields. The design of the ring is described in this paper. Considering the requirements of users in different fields, a lattice based on a so-called triple bend achromat structure with a high flexibility has been chosen. With this lattice, different optical options, including the HBSB (high brightness, small beam), the SBL (short bunch length) and the HLF (high light flux) modes can be realized. A small emittance of 7 nm rad and a short bunch length of the order of several mm can be achieved. In the first phase the synchrotron radiation in the UV and XUV region (the critical wavelength is 8.3 nm) will be provided from the regular dipole magnets. Later on, a 10 T wiggler magnet and other special inserters will be added, and other applications and beam dynamics studies will be feasible. Bending magnets are of the parallel faced C configuration. The effective aperture of the vacuum chamber is 2.3 cm (vertical) in the bending magnets and 4.7 cm elsewhere with a working vacuum condition of 10-9 Torr. Collective effects have been studied initially. First calculations indicate that a lifetime of several hours, influenced by the Touschek effect and residual gas scattering will be achievable for a 200 mA beam in the HLF mode for the standard rf parameters. A 70 MeV racetrack microtron will serve as injector for the ring.

  6. Toward Generalization of Automated Temporal Abstraction to Partially Observable Reinforcement Learning.

    PubMed

    Çilden, Erkin; Polat, Faruk

    2015-08-01

    Temporal abstraction for reinforcement learning (RL) aims to decrease learning time by making use of repeated sub-policy patterns in the learning task. Automatic extraction of abstractions during RL process is difficult but has many challenges such as dealing with the curse of dimensionality. Various studies have explored the subject under the assumption that the problem domain is fully observable by the learning agent. Learning abstractions for partially observable RL is a relatively less explored area. In this paper, we adapt an existing automatic abstraction method, namely extended sequence tree, originally designed for fully observable problems. The modified method covers a certain family of model-based partially observable RL settings. We also introduce belief state discretization methods that can be used with this new abstraction mechanism. The effectiveness of the proposed abstraction method is shown empirically by experimenting on well-known benchmark problems. PMID:25216494

  7. Perspectives toward the stereotype production method for public symbol design: a case study of novice designers.

    PubMed

    Ng, Annie W Y; Siu, Kin Wai Michael; Chan, Chetwyn C H

    2013-01-01

    This study investigated the practices and attitudes of novice designers toward user involvement in public symbol design at the conceptual design stage, i.e. the stereotype production method. Differences between male and female novice designers were examined. Forty-eight novice designers (24 male, 24 female) were asked to design public symbol referents based on suggestions made by a group of users in a previous study and provide feedback with regard to the design process. The novice designers were receptive to the adoption of user suggestions in the conception of the design, but tended to modify the pictorial representations generated by the users to varying extents. It is also significant that the male and female novice designers appeared to emphasize different aspects of user suggestions, and the female novice designers were more positive toward these suggestions than their male counterparts. The findings should aid the optimization of the stereotype production method for user-involved symbol design. PMID:22632980

  8. Abstractions for Fault-Tolerant Distributed System Verification

    NASA Technical Reports Server (NTRS)

    Pike, Lee S.; Maddalon, Jeffrey M.; Miner, Paul S.; Geser, Alfons

    2004-01-01

    Four kinds of abstraction for the design and analysis of fault tolerant distributed systems are discussed. These abstractions concern system messages, faults, fault masking voting, and communication. The abstractions are formalized in higher order logic, and are intended to facilitate specifying and verifying such systems in higher order theorem provers.

  9. Recording of Neonatal Seizures in Birth Certificates, Maternal Interviews, and Hospital Discharge Abstracts in a Cerebral Palsy Case-Control Study in Michigan.

    PubMed

    Li, Qing; Lenski, Madeleine; Copeland, Glenn; Kinsman, Stephen L; Francis, Matthew; Kirby, Russell S; Paneth, Nigel

    2016-06-01

    We evaluated the recording of neonatal seizures in birth certificates, hospital discharge abstracts, and maternal interviews in 372 children, 198 of them with cerebral palsy, born in Michigan hospitals from 1993 to 2010. In birth certificates, we examined checkbox items "seizures" or "seizure or serious neurologic dysfunction"; in hospital discharge abstracts ICD-9-CM codes 779.0, 345.X, and 780.3; and in maternal interviews a history of seizures or convulsions on day 1 of life recalled 2-16 years later. In 27 neonates, 38 neonatal seizures were recorded in 1 or more sources, 17 in discharge abstracts, 20 in maternal interviews, but just 1 on a birth certificate. The kappa coefficient (κ) between interviews and discharge abstracts was moderate (κ = 0.55), and substantial (κ = 0.63) if mothers noted use of antiepileptics. Agreement was higher (κ = 0.71 vs κ = 0.29) in term births than in preterm births. Birth certificates significantly underreported neonatal seizures. PMID:26668053

  10. Replace with abstract title

    NASA Astrophysics Data System (ADS)

    Park, Daesik; Kang, Seongjun; Kim, Huijung; Whang, Jungnam

    2004-03-01

    The interface property of perylene thin-film and OTS (octadecyltriclorosilane) monolayer, and its effects on the characteristics of perylene thin-film transistor D. S. Park, S. J. Kang, H. J. Kim, and C. N. Whang Institute of Physics and Applied Physics, Yonsei University, Seoul, KOREA We researched the perylene thin-film which is known for the characteristics of both P-type, and N-type. Perylene thin-film was deposited on SiO2 substrates with different deposition rate. Next, to study the interface effects of OTS (octadecyltriclorosilane) we inserted OTS monolayer between perylene thin-film and SiO2 substrates. And we compared grain size and crystallinity with AFM (Atomoic Force Microscopy) and XRD (X-Ray Diffraction), then we got dramatically increased crystallinity and reduced film roughness with OTS treatment. And we studied the interface with XPS (X-ray Photoelectron Spectroscopy) and FESEM (Field Effect Single Electron Spectroscopy). Then we fabricated OTS inserted perylene thin-film transistor with different deposition rate and mesured current-voltage characteristics. And we got increased saturation current and hole mobility over a hundred time with OTS treatment on SiO2, the saturation current was over 1/1000000 A and mobility was approximately 0.1cm^2/Vs.

  11. Heat source reentry vehicle design study

    NASA Technical Reports Server (NTRS)

    Ryan, R. L.

    1971-01-01

    The design details are presented of a flight-type heat source reentry vehicle and heat exchanger compatible with the isotope Brayton power conversion system. The reference reentry vehicle and heat exchanger were modified, orbital and superorbital capability was assessed, and a complete set of detail design layout drawings were provided.

  12. New Study Designs | Division of Cancer Prevention

    Cancer.gov

    The Division of Cancer Prevention is expanding clinical research beyond standard trial designs to find interventions that may play a role in more than one prevalent disease. | The Division of Cancer Prevention is expanding clinical research beyond standard trial designs to find interventions that may play a role in more than one prevalent disease.

  13. Low vision goggles: optical design studies

    NASA Astrophysics Data System (ADS)

    Levy, Ofer; Apter, Boris; Efron, Uzi

    2006-08-01

    Low Vision (LV) due to Age Related Macular Degeneration (AMD), Glaucoma or Retinitis Pigmentosa (RP) is a growing problem, which will affect more than 15 million people in the U.S alone in 2010. Low Vision Aid Goggles (LVG) have been under development at Ben-Gurion University and the Holon Institute of Technology. The device is based on a unique Image Transceiver Device (ITD), combining both functions of imaging and Display in a single chip. Using the ITD-based goggles, specifically designed for the visually impaired, our aim is to develop a head-mounted device that will allow the capture of the ambient scenery, perform the necessary image enhancement and processing, and re-direct it to the healthy part of the patient's retina. This design methodology will allow the Goggles to be mobile, multi-task and environmental-adaptive. In this paper we present the optical design considerations of the Goggles, including a preliminary performance analysis. Common vision deficiencies of LV patients are usually divided into two main categories: peripheral vision loss (PVL) and central vision loss (CVL), each requiring different Goggles design. A set of design principles had been defined for each category. Four main optical designs are presented and compared according to the design principles. Each of the designs is presented in two main optical configurations: See-through system and Video imaging system. The use of a full-color ITD-Based Goggles is also discussed.

  14. Shuttle Global Positioning System (GPS) design study

    NASA Technical Reports Server (NTRS)

    Nilsen, P. W.

    1979-01-01

    The effects of oscillator noise on Shuttle Global Positioning System (GPS) receiver performance, GPS navigation system self-test, GPS ground transmitter design to augment shuttle navigation, the effect of ionospheric delay modelling on GPS receiver design, and GPS receiver tracking of Shuttle transient maneuvers were investigated.

  15. A Case Study in CAD Design Automation

    ERIC Educational Resources Information Center

    Lowe, Andrew G.; Hartman, Nathan W.

    2011-01-01

    Computer-aided design (CAD) software and other product life-cycle management (PLM) tools have become ubiquitous in industry during the past 20 years. Over this time they have continuously evolved, becoming programs with enormous capabilities, but the companies that use them have not evolved their design practices at the same rate. Due to the…

  16. Thomas Leps Internship Abstract

    NASA Technical Reports Server (NTRS)

    Leps, Thomas

    2016-01-01

    issue. I have since narrowed the likely source of the error down to a Software Development Kit released by the camera supplier PixeLink. I have since developed a workaround in order to build star grids for calibration until the software bug can be isolated and fixed. I was also tasked with building a Hardware in the Loop test stand in order to test the full Op-Nav system. A 4k screen displays simulated Lunar and Terrestrial images from a possible Orion trajectory. These images are then projected through a collimator and then captured with an Op-Nav camera controlled by an Intel NUC computer running flight software. The flight software then analyzes the images to determine attitude and position, this data is then reconstructed into a trajectory and matched to the simulated trajectory in order to determine the accuracy of the attitude and position estimates. In order for the system to work it needs to be precisely and accurately aligned. I developed an alignment procedure that allows the screen, collimator and camera to be squared, centered and collinear with each other within a micron spatially and 5 arcseconds in rotation. I also designed a rigid mount for the screen that was machined on site in Building 10 by another intern. While I was working in the EOL we received a $500k Orion startracker for alignment procedure testing. Due to my prior experience in electronics development, as an ancillary duty, I was tasked with building the cables required to operate and power the startracker. If any errors are made building these cables the startracker would be destroyed, I was honored that the director of the lab entrusted such a critical component with me. This internship has cemented my view on public space exploration. I always preferred public sector to privatization because, as a scientist, the most interesting aspects of space for me are not necessarily the most profitable. I was concerned that the public sector was faltering however, and that in order to improve human

  17. Instructional Design: Case Studies in Communities of Practice

    ERIC Educational Resources Information Center

    Keppell, Michael, Ed.

    2007-01-01

    "Instructional Design: Case Studies in Communities of Practice" documents real-world experiences of instructional designers and staff developers who work in communities of practice. "Instructional Design: Case Studies in Communities of Practice" explains the strategies and heuristics used by instructional designers when working in different…

  18. Heat pipe technology. A bibliography with abstracts

    NASA Technical Reports Server (NTRS)

    1978-01-01

    This bibliography cites 55 publications on the theory, design, development, fabrication, and testing of heat pipes. Applications covered include solar, nuclear, and thermoelectric energy conversion. A book (in Russian) on low temperature heat pipes is included as well as abstracts when available. Indexes provided list authors, titles/keywords (permuted) and patents.

  19. ANNUAL REPORT-AUTOMATIC INDEXING AND ABSTRACTING.

    ERIC Educational Resources Information Center

    Lockheed Missiles and Space Co., Palo Alto, CA. Electronic Sciences Lab.

    THE INVESTIGATION IS CONCERNED WITH THE DEVELOPMENT OF AUTOMATIC INDEXING, ABSTRACTING, AND EXTRACTING SYSTEMS. BASIC INVESTIGATIONS IN ENGLISH MORPHOLOGY, PHONETICS, AND SYNTAX ARE PURSUED AS NECESSARY MEANS TO THIS END. IN THE FIRST SECTION THE THEORY AND DESIGN OF THE "SENTENCE DICTIONARY" EXPERIMENT IN AUTOMATIC EXTRACTION IS OUTLINED. SOME OF…

  20. Heat pipe technology: A bibliography with abstracts

    NASA Technical Reports Server (NTRS)

    1971-01-01

    The annual supplement on heat pipe technology for 1971 is presented. The document contains 101 references with abstracts and 47 patents. The subjects discussed are: (1) heat pipe applications, (2) heat pipe theory, (3) design, development, and fabrication of heat pipes, (4) testing and operation, (5) subject and author index, and (6) heat pipe related patents.

  1. An Introduction to Chemical Abstracts, with Exercises.

    ERIC Educational Resources Information Center

    Robertson, Craig A.

    This workbook is the first in a series of three that has been integrated into the chemistry curriculum for majors at the University of Vermont. The workbook consists of exercises designed to provide undergraduate students with foundation skills in the use of professional literature and a familiarity with the printed "Chemical Abstracts." Each…

  2. Taxonomic abstraction in psychobiology.

    PubMed

    Evans, S H; Chafetz, M D; Gage, F H

    1984-10-01

    If a body of knowledge in a scientific discipline is to be extended beyond empirical observation and into the realm of laws and principles, one of the fundamental requirements is a taxonomy which supports the systematic integration of observations. Psychobiology benefits from taxonomies provided by biology and chemistry, which include not only object oriented taxonomies such as species or chemical elements, but also process oriented taxonomies, such as oxidation, metabolism, phototaxis, or predation. Psychobiology has yet to provide equivalent taxonomies for its behavioral observations, although the common use of terms such as fear, anger, arousal, stress, and memory might lead one to suppose that these are based on a well established taxonomy of behavioral measures. In this report the logical and quantitative requirements for treating behavioral measures in terms of taxonomic classes are reviewed. A sample of studies representing recent research in psychobiology was examined to assess interest in such a taxonomy and to identify elements of current practice which might contribute to its development. Recent practice displays some evidence of interest in behavioral classes, in choice of language, and in frequent use of multiple dependent measures. Multivariate methods, which might elicit from such data evidence contributing to the development of a taxonomy, are rarely used. Recommendations are given on some appropriate analytic methods for data resulting from current practice and for new exploratory paradigms which could aim directly at the establishment of taxonomic classes for behaviors. PMID:6512516

  3. Perfect study, poor evidence: interpretation of biases preceding study design.

    PubMed

    Ioannidis, John P A

    2008-07-01

    In the interpretation of research evidence, data that have been accumulated in a specific isolated study are typically examined. However, important biases may precede the study design. A study may be misleading, useless, or even harmful, even though it seems to be perfectly designed, conducted, analyzed, and reported. Some biases pertain to setting the wider research agenda and include poor scientific relevance, minimal clinical utility, or failure to consider prior evidence (non-consideration of prior evidence, biased consideration of prior evidence, or consideration of biased prior evidence). Other biases reflect issues in setting the specific research questions: examples include straw man effects, avoidance of head-to-head comparisons, head-to-head comparisons bypassing demonstration of effectiveness, overpowered studies, unilateral aims (focusing on benefits and neglecting harms), and the approach of the industry towards research as bulk advertisement (including ghost management of the literature). The concerted presence of such biases may have a multiplicative, detrimental impact on the scientific literature. These issues should be considered carefully when interpreting research results. PMID:18582622

  4. Mechanical Engineering Department technical abstracts

    SciTech Connect

    Denney, R.M.

    1982-07-01

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  5. Recursive Abstractions for Parameterized Systems

    NASA Astrophysics Data System (ADS)

    Jaffar, Joxan; Santosa, Andrew E.

    We consider a language of recursively defined formulas about arrays of variables, suitable for specifying safety properties of parameterized systems. We then present an abstract interpretation framework which translates a paramerized system as a symbolic transition system which propagates such formulas as abstractions of underlying concrete states. The main contribution is a proof method for implications between the formulas, which then provides for an implementation of this abstract interpreter.

  6. Program and abstracts

    SciTech Connect

    Not Available

    1994-10-01

    The increasing scale-up of fast pyrolysis in North America and Europe, as well as the exploration and expansion of markets for the energy use of biocrude oils that now needs to take place, suggested that it was timely to convene an international meeting on the properties and combustion behavior of these oils. A common understanding of the state-of-the-art and technical and other challenges which need to be met during the commercialization of biocrude fuel use, can be achieved. The technical issues and understanding of combustion of these oils are rapidly being advanced through R&D in the United States, Canada, Europe and Scandinavia. It is obvious that for the maximum economic impact of biocrude, it will be necessary to have a common set of specifications so that oils can be used interchangeably with engines and combustors which require minimal modification to use these renewable fuels. Fundamental and applied studies being pursued in several countries are brought together in this workshop so that we can arrive at common strategies. In this way, both the science and the commercialization are advanced to the benefit of all, without detracting from the competitive development of both the technology and its applications. This United States-Canada-Finland collaboration has led to the two and one half day specialists meeting at which the technical basis for advances in biocrude development is discussed. The goal is to arrive at a common agenda on issues that cross national boundaries in this area. Examples of agenda items are combustion phenomena, the behavior of trace components . of the oil (N, alkali metals), the formation of NO{sub x}, in combustion, the need for common standards and environmental safety and health issues in the handling, storage and transportation of biocrudes.

  7. A study of commuter airplane design optimization

    NASA Technical Reports Server (NTRS)

    Keppel, B. V.; Eysink, H.; Hammer, J.; Hawley, K.; Meredith, P.; Roskam, J.

    1978-01-01

    The usability of the general aviation synthesis program (GASP) was enhanced by the development of separate computer subroutines which can be added as a package to this assembly of computerized design methods or used as a separate subroutine program to compute the dynamic longitudinal, lateral-directional stability characteristics for a given airplane. Currently available analysis methods were evaluated to ascertain those most appropriate for the design functions which the GASP computerized design program performs. Methods for providing proper constraint and/or analysis functions for GASP were developed as well as the appropriate subroutines.

  8. PLUTONIUM-238 PRODUCTION TARGET DESIGN STUDIES

    SciTech Connect

    Hurt, Christopher J; Wham, Robert M; Hobbs, Randall W; Owens, R Steven; Chandler, David; Freels, James D; Maldonado, G Ivan

    2014-01-01

    A new supply chain is planned for plutonium-238 using existing reactors at the Oak Ridge National Laboratory (ORNL) and Idaho National Laboratory (INL) and existing chemical recovery facilities at ORNL. Validation and testing activities for new irradiation target designs have been conducted in three phases over a 2 year period to provide data for scale-up to production. Target design, qualification, target fabrication, and irradiation of fully-loaded targets have been accomplished. Data from post-irradiation examination (PIE) supports safety analysis and irradiation of future target designs.

  9. Ozone Conference II: Abstract Proceedings

    SciTech Connect

    1999-11-01

    Ozone Conference II: Pre- and Post-Harvest Applications Two Years After Gras, was held September 27-28, 1999 in Tulare, California. This conference, sponsored by EPRI's Agricultural Technology Alliance and Southern California Edison's AgTAC facility, was coordinated and organized by the on-site ATA-AgTAC Regional Center. Approximately 175 people attended the day-and-a-half conference at AgTAC. During the Conference twenty-two presentations were given on ozone food processing and agricultural applications. Included in the presentations were topics on: (1) Ozone fumigation; (2) Ozone generation techniques; (3) System and design applications; (4) Prewater treatment requirements; (5) Poultry water reuse; (6) Soil treatments with ozone gas; and (7) Post-harvest aqueous and gaseous ozone research results. A live videoconference between Tulare and Washington, D.C. was held to discuss the regulators' view from inside the beltway. Attendees participated in two Roundtable Question and Answer sessions and visited fifteen exhibits and demonstrations. The attendees included university and governmental researchers, regulators, consultants and industry experts, technology developers and providers, and corporate and individual end-users. This report is comprised of the Abstracts of each presentation, biographical sketches for each speaker and a registration/attendees list.

  10. Mars orbiter conceptual systems design study

    NASA Technical Reports Server (NTRS)

    Dixon, W.; Vogl, J.

    1982-01-01

    Spacecraft system and subsystem designs at the conceptual level to perform either of two Mars Orbiter missions, a Climatology Mission and an Aeronomy Mission were developed. The objectives of these missions are to obtain and return data.

  11. Argonne Tau-charm factory collider design study

    SciTech Connect

    Teng, L.C.; Crosbie, E.A.; Norem, J.

    1995-12-01

    The design approach and design principles for a Tau-charm Factory at Argonne were studied. These studies led to a set of preliminary parameters and tentative component features as presented in this paper.

  12. Epidemiological study air disaster in Amsterdam (ESADA): study design

    PubMed Central

    Slottje, Pauline; Huizink, Anja C; Twisk, Jos WR; Witteveen, Anke B; van der Ploeg, Henk M; Bramsen, Inge; Smidt, Nynke; Bijlsma, Joost A; Bouter, Lex M; van Mechelen, Willem; Smid, Tjabe

    2005-01-01

    Background In 1992, a cargo aircraft crashed into apartment buildings in Amsterdam, killing 43 victims and destroying 266 apartments. In the aftermath there were speculations about the cause of the crash, potential exposures to hazardous materials due to the disaster and the health consequences. Starting in 2000, the Epidemiological Study Air Disaster in Amsterdam (ESADA) aimed to assess the long-term health effects of occupational exposure to this disaster on professional assistance workers. Methods/Design Epidemiological study among all the exposed professional fire-fighters and police officers who performed disaster-related task(s), and hangar workers who sorted the wreckage of the aircraft, as well as reference groups of their non-exposed colleagues who did not perform any disaster-related tasks. The study took place, on average, 8.5 years after the disaster. Questionnaires were used to assess details on occupational exposure to the disaster. Health measures comprised laboratory assessments in urine, blood and saliva, as well as self-reported current health measures, including health-related quality of life, and various physical and psychological symptoms. Discussion In this paper we describe and discuss the design of the ESADA. The ESADA will provide additional scientific knowledge on the long-term health effects of technological disasters on professional workers. PMID:15921536

  13. Empirical studies of software design: Implications for SSEs

    NASA Technical Reports Server (NTRS)

    Krasner, Herb

    1988-01-01

    Implications for Software Engineering Environments (SEEs) are presented in viewgraph format for characteristics of projects studied; significant problems and crucial problem areas in software design for large systems; layered behavioral model of software processes; implications of field study results; software project as an ecological system; results of the LIFT study; information model of design exploration; software design strategies; results of the team design study; and a list of publications.

  14. Leadership Abstracts; Volume 4, 1991.

    ERIC Educational Resources Information Center

    Doucette, Don, Ed.

    1991-01-01

    "Leadership Abstracts" is published bimonthly and distributed to the chief executive officer of every two-year college in the United States and Canada. This document consists of the 15 one-page abstracts published in 1991. Addressing a variety of topics of interest to the community college administrators, this volume includes: (1) "Delivering the…

  15. Food Science and Technology Abstracts.

    ERIC Educational Resources Information Center

    Cohen, Elinor; Federman, Joan

    1979-01-01

    Introduces the reader to the Food Science and Technology Abstracts, a data file that covers worldwide literature on human food commodities and aspects of food processing. Topics include scope, subject index, thesaurus, searching online, and abstracts; tables provide a comparison of ORBIT and DIALOG versions of the file. (JD)

  16. Innovation Abstracts, Volume XV, 1993.

    ERIC Educational Resources Information Center

    Roueche, Suanne D., Ed.

    1993-01-01

    This volume of 30 one- to two-page abstracts from 1993 highlights a variety of innovative approaches to teaching and learning in the community college. Topics covered in the abstracts include: (1) role-playing to encourage critical thinking; (2) team learning techniques to cultivate business skills; (3) librarian-instructor partnerships to create…

  17. Student Success with Abstract Art

    ERIC Educational Resources Information Center

    Hamidou, Kristine

    2009-01-01

    An abstract art project can be challenging or not, depending on the objectives the teacher sets up. In this article, the author describes an abstract papier-mache project that is a success for all students, and is a versatile project easily manipulated to suit the classroom of any art teacher.

  18. Abstraction in perceptual symbol systems.

    PubMed Central

    Barsalou, Lawrence W

    2003-01-01

    After reviewing six senses of abstraction, this article focuses on abstractions that take the form of summary representations. Three central properties of these abstractions are established: ( i ) type-token interpretation; (ii) structured representation; and (iii) dynamic realization. Traditional theories of representation handle interpretation and structure well but are not sufficiently dynamical. Conversely, connectionist theories are exquisitely dynamic but have problems with structure. Perceptual symbol systems offer an approach that implements all three properties naturally. Within this framework, a loose collection of property and relation simulators develops to represent abstractions. Type-token interpretation results from binding a property simulator to a region of a perceived or simulated category member. Structured representation results from binding a configuration of property and relation simulators to multiple regions in an integrated manner. Dynamic realization results from applying different subsets of property and relation simulators to category members on different occasions. From this standpoint, there are no permanent or complete abstractions of a category in memory. Instead, abstraction is the skill to construct temporary online interpretations of a category's members. Although an infinite number of abstractions are possible, attractors develop for habitual approaches to interpretation. This approach provides new ways of thinking about abstraction phenomena in categorization, inference, background knowledge and learning. PMID:12903648

  19. Technical abstracts: Mechanical engineering, 1990

    SciTech Connect

    Broesius, J.Y.

    1991-03-01

    This document is a compilation of the published, unclassified abstracts produced by mechanical engineers at Lawrence Livermore National Laboratory (LLNL) during the calendar year 1990. Many abstracts summarize work completed and published in report form. These are UCRL-JC series documents, which include the full text of articles to be published in journals and of papers to be presented at meetings, and UCID reports, which are informal documents. Not all UCIDs contain abstracts: short summaries were generated when abstracts were not included. Technical Abstracts also provides descriptions of those documents assigned to the UCRL-MI (miscellaneous) category. These are generally viewgraphs or photographs presented at meetings. An author index is provided at the back of this volume for cross referencing.

  20. Metaphor: Bridging embodiment to abstraction.

    PubMed

    Jamrozik, Anja; McQuire, Marguerite; Cardillo, Eileen R; Chatterjee, Anjan

    2016-08-01

    Embodied cognition accounts posit that concepts are grounded in our sensory and motor systems. An important challenge for these accounts is explaining how abstract concepts, which do not directly call upon sensory or motor information, can be informed by experience. We propose that metaphor is one important vehicle guiding the development and use of abstract concepts. Metaphors allow us to draw on concrete, familiar domains to acquire and reason about abstract concepts. Additionally, repeated metaphoric use drawing on particular aspects of concrete experience can result in the development of new abstract representations. These abstractions, which are derived from embodied experience but lack much of the sensorimotor information associated with it, can then be flexibly applied to understand new situations. PMID:27294425

  1. Empirical studies of design software: Implications for software engineering environments

    NASA Technical Reports Server (NTRS)

    Krasner, Herb

    1988-01-01

    The empirical studies team of MCC's Design Process Group conducted three studies in 1986-87 in order to gather data on professionals designing software systems in a range of situations. The first study (the Lift Experiment) used thinking aloud protocols in a controlled laboratory setting to study the cognitive processes of individual designers. The second study (the Object Server Project) involved the observation, videotaping, and data collection of a design team of a medium-sized development project over several months in order to study team dynamics. The third study (the Field Study) involved interviews with the personnel from 19 large development projects in the MCC shareholders in order to study how the process of design is affected by organizationl and project behavior. The focus of this report will be on key observations of design process (at several levels) and their implications for the design of environments.

  2. Preliminary design study. Shuttle modular scanning spectroradiometer

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Fundamental concepts on which to base a detailed design for a Shuttle Modular Scanning Spectroradiometer were developed, and a preliminary design is presented. The recommended design features modularity and flexibility. It includes a 75-cm f/1.7-telescope assembly in an all-reflective Schmidt configuration, a solid state scan system (pushbroom) with high resolution over a 15 deg field of view, and ten detector channels covering the spectral range from 0.45 to 12.5 micrometers. It uses charge transfer device techniques to accommodate a large number of detector elements for earth observation measurements. Methods for in-flight radiometric calibration, for image motion compensation, and for data processing are described. Recommendations for ground support equipment are included, and interfaces with the shuttle orbiter vehicle are illustrated.

  3. Design Study for a Mars Geyser Hopper

    NASA Technical Reports Server (NTRS)

    Landis, Geoffrey A.; Oleson, Steven J.; McGuire, Melissa

    2012-01-01

    The Mars Geyser Hopper is a design reference missions (DRMs) for a Discovery-class spacecraft using Advanced Stirling Radioisotope Generator (ASRG) power source. The Geyser Hopper is a mission concept that will investigate the springtime carbon-dioxide geysers found in regions around the south pole of Mars. The Geyser Hopper design uses Phoenix heritage systems and approach, but uses a single ASRG as the power source, rather than twin solar arrays, and is designed to last over a one-year stay on the South Pole. The spacecraft will land at a target landing area near the south pole of Mars, and have the ability to "hop" after a summertime landing to reposition itself close to a geyser site, and wait through the winter until the first sunlight of spring to witness first-hand the geyser phenomenon.

  4. Study of design constraints on helicopter noise

    NASA Technical Reports Server (NTRS)

    Sternfeld, H., Jr.; Wiedersum, C. W.

    1979-01-01

    A means of estimating the noise generated by a helicopter main rotor using information which is generally available during the preliminary design phase of aircraft development is presented. The method utilizes design charts and tables which do not require an understanding of acoustical theory or computational procedures in order to predict the perceived noise level, a weighted sound pressure level, or C weighted sound pressure level of a single hovering rotor. A method for estimating the effective perceived noise level in forward flight is also included. In order to give the designer an assessment of the relative rotor performance, which may be traded off against noise, an additional chart for estimating the percent of available rotor thrust which must be expended in lifting the rotor and drive system, is included as well as approach for comparing the subjective acceptability of various rotors once the absolute sound pressure levels are predicted.

  5. Observational Activities at Manipur University, India (Abstract)

    NASA Astrophysics Data System (ADS)

    Singh, K. Y.; Meitei, I. A.; Singh, S. A.; Singh, R. B.

    2015-06-01

    (Abstract only) We have innovatively designed and constructed three observatories each costing a few hundred USD for housing three small Schmidt-Cassegrain type telescopes namely, Celestron CGE925, Celestron CGE1400, Meade 12-inch LX200GPS. These observatories are completely different in design and are found to be perfectly usable for doing serious work on astronomical observation and measurements. The observatory with the Celestron CGE1400 telescope has been inducted, since January 2012, as one of the observatories of the international “Orion Project” headquartered at Phoenix, Arizona, which is dedicated for photometric and spectroscopic observations of five bright variable stars of the Orion constellation namely, Betelgeuse (alpha Ori), Rigel (beta Ori), Mintaka (delta Ori), Alnilam (epsilon Ori) and Alnitak (zeta Ori). Using this observatory, we have been producing BVRI photometric data for the five stars of the Orion project. The other observatory with the Meade 12-inch LX200GPS telescope is being inducted into service for CCD photometric study of SU UMa stars in connection with implementation of a project funded by Indian Space Research Organization (ISRO). In the present paper, we would like to describe our self-built observatories, our observational facilities, the BVRI photometric data that we acquired for the Orion project, and our future plan for observation of variable stars of interest.

  6. A Study of Improving Eighth Graders' Learning Deficiency in Algebra by Applying a Realistic Context Instructional Design

    ERIC Educational Resources Information Center

    Chang, Yu-Liang; Huang, Yu-I

    2014-01-01

    The intention of this study was to improve the learning deficiency in algebraic learning and to enhance Taiwanese middle students' learning achievement and interest in algebra. By using a grade skipping experimental design, the research team intended to find out an effective way to benefit these students' leaning in abstract algebraic concepts.…

  7. Study on Reactive Automatic Compensation System Design

    NASA Astrophysics Data System (ADS)

    Zhe, Sun; Qingyang, Liang; Peiqing, Luo; Chenfei, Zhang

    At present, low-voltage side of transformer is public in urban distribution network, as inductive load of household appliances is increasing, the power factor decreased, this lead to a large loss of public transformer low voltage side, the supply voltage indicators can not meet user's requirements. Therefore, the design of reactive power compensation system has become another popular research. This paper introduces the principle of reactive power compensation, analyzes key technologies of reactive power compensation, design an overall program of reactive power automatic compensation system to conquer various deficiencies of reactive power automatic compensation equipment.

  8. Youth in the Netherlands Study (JOiN): study design

    PubMed Central

    2012-01-01

    Background Adolescence is a critical developmental period regarding exposure to substances. Therefore, it is important to be able to identify those adolescents who are most vulnerable to substance abuse in the (near) future. The JOiN study was specifically designed to examine two endophenotypes of adolescent substance use in a normal risk (NR) and high risk (HR) sample of adolescents: (1) behavioural disinhibition, and (2) individual differences in stress sensitivity. Methods The NR adolescents were part of a longitudinal general population study at the Erasmus Medical Center in Rotterdam, the Netherlands of children and adolescents initially aged 6 to 18 years old. Three assessment waves have been nearly completed, and data are available of N = 711 participants for stress sensitivity measures, and of a subsample of N = 110 for electroencephalography (EEG) measures. Added to this study, HR adolescents who had at least one parent with a substance use disorder and who were treated by an outpatient clinic of a primary addiction care provider were approached via their parent(s). In total, N = 83 adolescents formed this HR sample. NR and HR adolescents participated in standardized stress procedure and EEG procedures in our laboratory. Questionnaires were filled out on background variables, behavioural and emotional problems, and substance use, and a diagnostic interview was conducted with adolescents and parents to assess psychopathology symptoms. DNA was collected through saliva or blood samples. Discussion The design of the JOiN study is optimal for examining the predictive role of endophenotypes of adolescent substance use. The combination of different methods, i.e. stress physiology, electrophysiology, genetics, and questionnaire data from several informants on a range of behaviours and environmental factors enables the investigation of the multifactorial nature of adolescent substance use. PMID:22583863

  9. Semantic Neighborhood Effects for Abstract versus Concrete Words

    PubMed Central

    Danguecan, Ashley N.; Buchanan, Lori

    2016-01-01

    Studies show that semantic effects may be task-specific, and thus, that semantic representations are flexible and dynamic. Such findings are critical to the development of a comprehensive theory of semantic processing in visual word recognition, which should arguably account for how semantic effects may vary by task. It has been suggested that semantic effects are more directly examined using tasks that explicitly require meaning processing relative to those for which meaning processing is not necessary (e.g., lexical decision task). The purpose of the present study was to chart the processing of concrete versus abstract words in the context of a global co-occurrence variable, semantic neighborhood density (SND), by comparing word recognition response times (RTs) across four tasks varying in explicit semantic demands: standard lexical decision task (with non-pronounceable non-words), go/no-go lexical decision task (with pronounceable non-words), progressive demasking task, and sentence relatedness task. The same experimental stimulus set was used across experiments and consisted of 44 concrete and 44 abstract words, with half of these being low SND, and half being high SND. In this way, concreteness and SND were manipulated in a factorial design using a number of visual word recognition tasks. A consistent RT pattern emerged across tasks, in which SND effects were found for abstract (but not necessarily concrete) words. Ultimately, these findings highlight the importance of studying interactive effects in word recognition, and suggest that linguistic associative information is particularly important for abstract words. PMID:27458422

  10. Semantic Neighborhood Effects for Abstract versus Concrete Words.

    PubMed

    Danguecan, Ashley N; Buchanan, Lori

    2016-01-01

    Studies show that semantic effects may be task-specific, and thus, that semantic representations are flexible and dynamic. Such findings are critical to the development of a comprehensive theory of semantic processing in visual word recognition, which should arguably account for how semantic effects may vary by task. It has been suggested that semantic effects are more directly examined using tasks that explicitly require meaning processing relative to those for which meaning processing is not necessary (e.g., lexical decision task). The purpose of the present study was to chart the processing of concrete versus abstract words in the context of a global co-occurrence variable, semantic neighborhood density (SND), by comparing word recognition response times (RTs) across four tasks varying in explicit semantic demands: standard lexical decision task (with non-pronounceable non-words), go/no-go lexical decision task (with pronounceable non-words), progressive demasking task, and sentence relatedness task. The same experimental stimulus set was used across experiments and consisted of 44 concrete and 44 abstract words, with half of these being low SND, and half being high SND. In this way, concreteness and SND were manipulated in a factorial design using a number of visual word recognition tasks. A consistent RT pattern emerged across tasks, in which SND effects were found for abstract (but not necessarily concrete) words. Ultimately, these findings highlight the importance of studying interactive effects in word recognition, and suggest that linguistic associative information is particularly important for abstract words. PMID:27458422

  11. A pragmatic approach to the design of population pharmacokinetic studies.

    PubMed

    Roy, Amit; Ette, Ene I

    2005-01-01

    The publication of a seminal article on nonlinear mixed-effect modeling led to a revolution in pharmacokinetics (PKs) with the introduction of the population approach. Since then, interest in obtaining accurate and precise estimates of population PK parameters has led to work on population PK study design that extended previous work on optimal sampling designs for individual PK parameter estimation. The issues and developments in the design of population PK studies are reviewed as a prelude to investigating, via simulation, the performance of 2 approaches (population Fisher information matrix D-optimal design and informative block [profile] randomized [IBR] design) for designing population PK studies. The results of our simulation study indicate that the designs based on the 2 approaches yielded efficient parameter estimates. The designs based on the 2 approaches performed similarly, and in some cases designs based on the IBR approach were slightly better. The ease with which the IBR designs can be generated makes them preferable in drug development, where pragmatism and time are of great consideration. We, therefore, refer to the IBR designs as pragmatic designs. Pragmatic designs that achieve high efficiency in the estimation parameters should be used in the design of population PK studies, and simulation should be used to determine the efficiency of the designs. PMID:16353920

  12. The Study of the Relationship between Probabilistic Design and Axiomatic Design Methodology. Volume 1

    NASA Technical Reports Server (NTRS)

    Onwubiko, Chinyere; Onyebueke, Landon

    1996-01-01

    This program report is the final report covering all the work done on this project. The goal of this project is technology transfer of methodologies to improve design process. The specific objectives are: 1. To learn and understand the Probabilistic design analysis using NESSUS. 2. To assign Design Projects to either undergraduate or graduate students on the application of NESSUS. 3. To integrate the application of NESSUS into some selected senior level courses in Civil and Mechanical Engineering curricula. 4. To develop courseware in Probabilistic Design methodology to be included in a graduate level Design Methodology course. 5. To study the relationship between the Probabilistic design methodology and Axiomatic design methodology.

  13. Advanced EVA system design requirements study

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Design requirements and criteria for the Space Station Advanced Extravehicular Activity System (EVAS) including crew enclosures, portable life support systems, maneuvering propulsion systems, and related extravehicular activity (EVA) support equipment were defined and established. The EVA mission requirements, environments, and medical and physiological requirements, as well as opertional, procedures, and training issues were considered.

  14. NASA Patent Abstracts bibliography: A continuing bibliography. Section 1: Abstracts (supplement 21) Abstracts

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Abstracts are cited for 87 patents and applications introduced into the NASA scientific and technical information system during the period of January 1982 through June 1982. Each entry consists of a citation, an abstract, and in mose cases, a key illustration selected from the patent or patent application.

  15. Choosing a Database for Social Work: A Comparison of Social Work Abstracts and Social Service Abstracts

    ERIC Educational Resources Information Center

    Flatley, Robert K.; Lilla, Rick; Widner, Jack

    2007-01-01

    This study compared Social Work Abstracts and Social Services Abstracts databases in terms of indexing, journal coverage, and searches. The authors interviewed editors, analyzed journal coverage, and compared searches. It was determined that the databases complement one another more than compete. The authors conclude with some considerations.

  16. Systematic study of high-frequency ultrasonic transducer design for laser-scanning photoacoustic ophthalmoscopy

    PubMed Central

    Ma, Teng; Zhang, Xiangyang; Chiu, Chi Tat; Chen, Ruimin; Kirk Shung, K.; Zhou, Qifa; Jiao, Shuliang

    2014-01-01

    Abstract. Photoacoustic ophthalmoscopy (PAOM) is a high-resolution in vivo imaging modality that is capable of providing specific optical absorption information for the retina. A high-frequency ultrasonic transducer is one of the key components in PAOM, which is in contact with the eyelid through coupling gel during imaging. The ultrasonic transducer plays a crucial role in determining the image quality affected by parameters such as spatial resolution, signal-to-noise ratio, and field of view. In this paper, we present the results of a systematic study on a high-frequency ultrasonic transducer design for PAOM. The design includes piezoelectric material selection, frequency selection, and the fabrication process. Transducers of various designs were successfully applied for capturing images of biological samples in vivo. The performances of these designs are compared and evaluated. PMID:24441942

  17. Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 4: IPAD system design

    NASA Technical Reports Server (NTRS)

    Goldfarb, W.; Carpenter, L. C.; Redhed, D. D.; Hansen, S. D.; Anderson, L. O.; Kawaguchi, A. S.

    1973-01-01

    The computing system design of IPAD is described and the requirements which form the basis for the system design are discussed. The system is presented in terms of a functional design description and technical design specifications. The functional design specifications give the detailed description of the system design using top-down structured programming methodology. Human behavioral characteristics, which specify the system design at the user interface, security considerations, and standards for system design, implementation, and maintenance are also part of the technical design specifications. Detailed specifications of the two most common computing system types in use by the major aerospace companies which could support the IPAD system design are presented. The report of a study to investigate migration of IPAD software between the two candidate 3rd generation host computing systems and from these systems to a 4th generation system is included.

  18. Computer aided design study of hypermixing nozzles

    NASA Technical Reports Server (NTRS)

    Mefferd, L. A.; Bevilacqua, P. M.

    1979-01-01

    The development of a nozzle which combines the hypermixing and lobe mechanisms to achieve further increases in jet entrainment and ejector performance is investigated. A computer program which incorporates a two equation turbulence model and is used to predict and compare the evolution of jets from various nozzle designs is discussed. Increasing the length of the nozzle lobes and an alternating lobe nozzle are a methods examined for increasing the entrainment rate.

  19. Preliminary design studies of an advanced general aviation aircraft

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Preliminary design studies are presented for an advanced general aviation aircraft. Advanced guidance and display concepts, laminar flow, smart structures, fuselage and wing structural design and manufacturing, and preliminary configuration design are discussed. This project was conducted as a graduate level design class under the auspices of the KU/NASA/USRA Advanced Design Program in Aeronautics. The results obtained during the fall semester of 1990 (Phase 1) and the spring semester of 1991 (Phase 2) are presented.

  20. MESUR probe aerobrake preliminary design study

    NASA Technical Reports Server (NTRS)

    Tauber, M.; Henline, W.; Chargin, M.; Papadopoulos, P.; Chen, Y.; Yang, L.; Hamm, K.

    1992-01-01

    Aerobrake design for the Mars Environmental Survey (MESUR) vehicles is considered which is intended for both a nominal entry velocity of 7 km/sec and a high-speed case of 9 km/sec. Topics discussed include the entry environment, the thermal protection requirements for several types of heat shield materials, the structural design of the aeroshell, and the total aerobrake masses and mass fractions. For the nominal 7 km/sec entry, a silicone elastometric charring ablator, SLA-561, was found to be the lightest heat shield material. For the 7 km/sec entry, the mass fraction of the aerobrake was 13.2 percent. For the 9 km/sec entry, the heat shield consisted of the medium-density ablator AVCOAT-5026; SLA-561 was used on part of the conical skirt. The aerobrake mass fraction in this case was 18 percent. It is recommended that separate aerobrakes be designed for probes entering at 7 and 9 km/sec.

  1. MESUR probe aerobrake preliminary design study

    NASA Astrophysics Data System (ADS)

    Tauber, M.; Henline, W.; Chargin, M.; Papadopoulos, P.; Chen, Y.; Yang, L.; Hamm, K.

    1992-07-01

    Aerobrake design for the Mars Environmental Survey (MESUR) vehicles is considered which is intended for both a nominal entry velocity of 7 km/sec and a high-speed case of 9 km/sec. Topics discussed include the entry environment, the thermal protection requirements for several types of heat shield materials, the structural design of the aeroshell, and the total aerobrake masses and mass fractions. For the nominal 7 km/sec entry, a silicone elastometric charring ablator, SLA-561, was found to be the lightest heat shield material. For the 7 km/sec entry, the mass fraction of the aerobrake was 13.2 percent. For the 9 km/sec entry, the heat shield consisted of the medium-density ablator AVCOAT-5026; SLA-561 was used on part of the conical skirt. The aerobrake mass fraction in this case was 18 percent. It is recommended that separate aerobrakes be designed for probes entering at 7 and 9 km/sec.

  2. Study Design in fMRI: Basic Principles

    ERIC Educational Resources Information Center

    Amaro, Edson, Jr.; Barker, Gareth J.

    2006-01-01

    There is a wide range of functional magnetic resonance imaging (fMRI) study designs available for the neuroscientist who wants to investigate cognition. In this manuscript we review some aspects of fMRI study design, including cognitive comparison strategies (factorial, parametric designs), and stimulus presentation possibilities (block,…

  3. User Design: A Case Study on Corporate Change

    ERIC Educational Resources Information Center

    Pastore, Raymond S.; Carr-Chellman, Alison A.; Lohmann, Neal

    2011-01-01

    The purpose of this study was to examine the effects of implementing user design strategies within the corporate culture. Using a case study design approach, this article explores the change process within a "Fortune" 100 company in which users were given significant decision-making powers. The main focus is on the unique nature of user design in…

  4. Design and analysis of multilevel analytic studies with applications to a study of air pollution.

    PubMed Central

    Navidi, W; Thomas, D; Stram, D; Peters, J

    1994-01-01

    We discuss a hybrid epidemiologic design that aims to combine two approaches to studying exposure-disease associations. The analytic approach is based on comparisons between individuals, e.g., case-control and cohort studies, and the ecologic approach is based on comparisons between groups. The analytic approach generally provides a stronger basis for inference, in part because of freedom from between-group confounding and better quality data, but the ecologic approach is less susceptible to attenuation bias from measurement error and may provide greater variability in exposure. The design we propose entails selection of a number of groups and enrollment of individuals within each group. Exposures, outcomes, confounders, and modifiers would be assessed on each individual; but additional exposure data might be available on the groups. The analysis would then combine the individual-level and the group-level comparisons, with appropriate adjustments for exposure measurement errors, and would test for compatibility between the two levels of analysis, e.g., to determine whether the associations at the individual level can account for the differences in disease rates between groups. Trade-offs between numbers of groups, numbers of individuals, and the extent of the individual and group measurement protocols are discussed in terms of design efficiency. These issues are illustrated in the context of an on-going study of the health effects of air pollution in southern California, in which 12 communities with different levels and types of pollution have been selected and 3500 school children are being enrolled in a ten-year cohort study.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7851327

  5. A hingeless rotor XV-15 design integration feasibility study. Volume 1: Engineering design studies

    NASA Technical Reports Server (NTRS)

    Magee, J. P.; Alexander, H. R.

    1978-01-01

    A design integration feasibility study was carried out to investigate what modifications to the basic XV-15 were necessary to accomplish a flight demonstration of the XV-15 with a Boeing hingeless rotor. Also investigated were additional modifications which would exploit the full capability provided by the combination of the new rotor and the existing T53 engine. An evaluation of the aircraft is presented and the data indicate improved air vehicle performance, acceptable aeroelastic margins, lower noise levels and improved flying qualities compared with the XV-15 aircraft. Inspection of the rotor system data provided shows an essentially unlimited life rotor for the flight spectrum anticipated for the XV-15.

  6. Designing SoTL Studies--Part II: Practicality

    ERIC Educational Resources Information Center

    Bartsch, Robert A.

    2013-01-01

    This chapter suggests solutions to common practical problems in designing SoTL studies. In addition, the advantages and disadvantages of different types of designs are discussed. [Part I available at EJ1029363.

  7. Phase A design study of microgravity fluoride fiber puller

    NASA Technical Reports Server (NTRS)

    Workman, Gary L.; Smith, Guy A.; Kosten, Susan

    1994-01-01

    Improved transmission properties for fluoride fibers due to space processing has great potential for commercial benefits. Phase A design study will determine conceptual feasibility and provide initial definition of the technical requirements and design issues for space.

  8. Teaching Abstract Concepts by Metaphor.

    ERIC Educational Resources Information Center

    Sutherland, Judith A.

    2001-01-01

    Defines metaphor and its uses; explains the construction and application of metaphors in nursing education. Describes the transformation of the abstract psychiatric concept of therapeutic milieu into a visual metaphor. (SK)

  9. Reusable Reentry Satellite (RRS) system design study

    NASA Technical Reports Server (NTRS)

    1991-01-01

    The Reusable Reentry Satellite (RRS) is intended to provide investigators in several biological disciplines with a relatively inexpensive method to access space for up to 60 days with eventual recovery on Earth. The RRS will permit totally intact, relatively soft, recovery of the vehicle, system refurbishment, and reflight with new and varied payloads. The RRS is to be capable of three reflights per year over a 10-year program lifetime. The RRS vehicle will have a large and readily accessible volume near the vehicle center of gravity for the Payload Module (PM) containing the experiment hardware. The vehicle is configured to permit the experimenter late access to the PM prior to launch and rapid access following recovery. The RRS will operate in one of two modes: (1) as a free-flying spacecraft in orbit, and will be allowed to drift in attitude to provide an acceleration environment of less than 10(exp -5) g. the acceleration environment during orbital trim maneuvers will be less than 10(exp -3) g; and (2) as an artificial gravity system which spins at controlled rates to provide an artificial gravity of up to 1.5 Earth g. The RRS system will be designed to be rugged, easily maintained, and economically refurbishable for the next flight. Some systems may be designed to be replaced rather than refurbished, if cost effective and capable of meeting the specified turnaround time. The minimum time between recovery and reflight will be approximately 60 days. The PMs will be designed to be relatively autonomous, with experiments that require few commands and limited telemetry. Mass data storage will be accommodated in the PM. The hardware development and implementation phase is currently expected to start in 1991 with a first launch in late 1993.

  10. Wind study for high altitude platform design

    NASA Technical Reports Server (NTRS)

    Strganac, T. W.

    1979-01-01

    An analysis of upper air winds was performed to define the wind environment at potential operating altitudes for high-altitude powered platform concepts. Expected wind conditions of the contiguous United States, Pacific area (Alaska to Sea of Japan), and European area (Norwegian and Mediterranean Seas) were obtained using a representative network of sites selected based upon adequate high-altitude sampling, geographic dispersion, and observed upper wind patterns. A data base of twenty plus years of rawinsonde gathered wind information was used in the analysis. Annual variations from surface to 10 mb (approximately 31 km) pressure altitude were investigated to encompass the practical operating range for the platform concepts. Parametric analysis for the United States and foreign areas was performed to provide a basis for vehicle system design tradeoffs. This analysis of wind magnitudes indicates the feasibility of annual operation at a majority of sites and more selective seasonal operation for the extreme conditions between the pressure altitudes of 100 to 25 mb based upon the assumed design speeds.

  11. Liquid Acquisition Device Design Sensitivity Study

    NASA Technical Reports Server (NTRS)

    VanDyke, M. K.; Hastings, L. J.

    2012-01-01

    In-space propulsion often necessitates the use of a capillary liquid acquisition device (LAD) to assure that gas-free liquid propellant is available to support engine restarts in microgravity. If a capillary screen-channel device is chosen, then the designer must determine the appropriate combination screen mesh and channel geometry. A screen mesh selection which results in the smallest LAD width when compared to any other screen candidate (for a constant length) is desirable; however, no best screen exists for all LAD design requirements. Flow rate, percent fill, and acceleration are the most influential drivers for determining screen widths. Increased flow rates and reduced percent fills increase the through-the-screen flow pressure losses, which drive the LAD to increased widths regardless of screen choice. Similarly, increased acceleration levels and corresponding liquid head pressures drive the screen mesh selection toward a higher bubble point (liquid retention capability). After ruling out some screens on the basis of acceleration requirements alone, candidates can be identified by examining screens with small flow-loss-to-bubble point ratios for a given condition (i.e., comparing screens at certain flow rates and fill levels). Within the same flow rate and fill level, the screen constants inertia resistance coefficient, void fraction, screen pore or opening diameter, and bubble point can become the driving forces in identifying the smaller flow-loss-to-bubble point ratios.

  12. Multilevel Interventions: Study Design and Analysis Issues

    PubMed Central

    Gross, Cary P.; Zaslavsky, Alan M.; Taplin, Stephen H.

    2012-01-01

    Multilevel interventions, implemented at the individual, physician, clinic, health-care organization, and/or community level, increasingly are proposed and used in the belief that they will lead to more substantial and sustained changes in behaviors related to cancer prevention, detection, and treatment than would single-level interventions. It is important to understand how intervention components are related to patient outcomes and identify barriers to implementation. Designs that permit such assessments are uncommon, however. Thus, an important way of expanding our knowledge about multilevel interventions would be to assess the impact of interventions at different levels on patients as well as the independent and synergistic effects of influences from different levels. It also would be useful to assess the impact of interventions on outcomes at different levels. Multilevel interventions are much more expensive and complicated to implement and evaluate than are single-level interventions. Given how little evidence there is about the value of multilevel interventions, however, it is incumbent upon those arguing for this approach to do multilevel research that explicates the contributions that interventions at different levels make to the desired outcomes. Only then will we know whether multilevel interventions are better than more focused interventions and gain greater insights into the kinds of interventions that can be implemented effectively and efficiently to improve health and health care for individuals with cancer. This chapter reviews designs for assessing multilevel interventions and analytic ways of controlling for potentially confounding variables that can account for the complex structure of multilevel data. PMID:22623596

  13. Wind study for high altitude platform design

    NASA Technical Reports Server (NTRS)

    Strganac, T. W.

    1979-01-01

    An analysis of upper air winds was performed to define the wind environment at potential operating altitudes for high altitude powered platform concepts. Wind conditions of the continental United States, Pacific area (Alaska to Sea of Japan), and European area (Norwegian and Mediterranean Sea) were obtained using a representative network of sites selected based upon adequate high altitude sampling, geographic dispersion, and observed upper wind patterns. A data base of twenty plus years of rawinsonde gathered wind information was used in the analysis. Annual variations from surface to 10 mb pressure altitude were investigated to encompass the practical operating range for the platform concepts. Parametric analysis for the United States and foreign areas was performed to provide a basis for vehicle system design tradeoffs. This analysis of wind magnitudes indicates the feasibility of annual operation at a majority of sites and more selective seasonal operation for the extreme conditions between the pressure altitudes of 100 to 25 mb based upon the assumed design speeds.

  14. Second Generation Waste Package Design Study

    SciTech Connect

    Armijo, J.S.; Misra, M.; Kar, Piyush

    2007-06-28

    The following describes the objectives of Project Activity 023 “Second Generation Waste Package Design Study” under DOE Cooperative Agreement DE-FC28-04RW12232. The objectives of this activity are: to review the current YMP baseline environment and establish corrosion testenvironments representative of the range of dry to intermittently wet conditions expected in the drifts as a function of time; to demonstrate the oxidation and corrosion resistance of A588 weathering steel and reference Alloy 22 samples in the representative dry to intermittently dry conditions; and to evaluate backfill and design features to improve the thermal performance analyses of the proposed second-generation waste packages using existing models developed at the University of Nevada, Reno(UNR). The work plan for this project activity consists of three major tasks: Task 1. Definition of expected worst-case environments (humidity, liquid composition and temperature) at waste package outer surfaces as a function of time, and comparison with environments defined in the YMP baseline; Task 2. Oxidation and corrosion tests of proposed second-generation outer container material; and Task 3. Second Generation waste package thermal analyses. Full funding was not provided for this project activity.

  15. Universal Design and Study Abroad: (Re-)Designing Programs for Effectiveness and Access

    ERIC Educational Resources Information Center

    Soneson, Heidi M.; Cordano, Roberta J.

    2009-01-01

    Universal Design provides a framework to effectively increase the number of students studying abroad by creating and expanding supportive environments designed to meet a wide range of student needs. While the concept of Universal Design originated with the needs of students with disabilities, its value and application extend to a much wider…

  16. Documentation Research and Training Centre Annual Seminar 9. Part 1: Papers: Abstracting, Indexing, and Reviewing Periodicals. Pattern of Use of Documents by Specialists. Comparative Study of Schemes for Library Classification.

    ERIC Educational Resources Information Center

    Documentation Research and Training Centre, Bangalore (India).

    Presented are the proceedings of the annual seminar (1971) of the Documentation Research and Training Centre (DRTC), Indian Statistical Institute. The text of 26 reports appears under the following major section headings: (1) Abstracting, indexing and reviewing periodicals; (2) Pattern of use of documents by specialists; (3) Comparative Study of…

  17. Techniques for Conducting Effective Concept Design and Design-to-Cost Trade Studies

    NASA Technical Reports Server (NTRS)

    Di Pietro, David A.

    2015-01-01

    Concept design plays a central role in project success as its product effectively locks the majority of system life cycle cost. Such extraordinary leverage presents a business case for conducting concept design in a credible fashion, particularly for first-of-a-kind systems that advance the state of the art and that have high design uncertainty. A key challenge, however, is to know when credible design convergence has been achieved in such systems. Using a space system example, this paper characterizes the level of convergence needed for concept design in the context of technical and programmatic resource margins available in preliminary design and highlights the importance of design and cost evaluation learning curves in determining credible convergence. It also provides techniques for selecting trade study cases that promote objective concept evaluation, help reveal unknowns, and expedite convergence within the trade space and conveys general practices for conducting effective concept design-to-cost studies.

  18. Subwog 12-D tritium technology meeting. Abstracts

    SciTech Connect

    Parker, M.J.; Addis, R.P.

    1991-12-31

    The first Subwog 12-D Tritium Technology Meeting was held at the Westinghouse Savannah River Site during the week of May 21, 1990. Subwog 12-D was created as a subwog of JOWOG 12 to address the need to understand tritium applications throughout the entire weapons complex. This includes weapons related concerns, but is primarily intended to cover tritium production and handling, environmental, safety and health issues, compatibility with materials in general; and facility design, commissioning and decommissioning activities. Tritium technology issues discussed included the physical and chemical properties, kinetics, storage, reservoir loading techniques, isotope exchange, radiolysis/aging, process and handling technology, compatibility, purification and filtering, analysis, monitoring methods, function testing, packaging and shipping, environmental and operational safety, facility design and safety, glovebox atmosphere clean-up systems, glovebox/facility decommissioning, tritium production target materials, and tritium recovery. This document provides a collection of most of the unclassified extended abstracts and abstracts presented at Subwog 12-D.

  19. Multicavity wave resonator design using chaos studies

    NASA Astrophysics Data System (ADS)

    Méndez-Bermúdez, J. A.; Luna-Acosta, G. A.

    2007-03-01

    We propose the construction of electromagnetic and electronic multicavity resonators based on the mechanism of dynamical tunneling proper of mixed chaotic systems. We use chaotic two-dimensional (2D) waveguides formed by a linear array of coupled cavities whose geometrical parameters are chosen to produce mixed phase space: chaotic regions surrounding islands of stability where ray (particle) motion is regular. Rays (particles) coming into the waveguide cannot penetrate into these islands but incoming plane waves tunnel into them at a certain discrete set of frequencies (energies) forming quasi-bound states. In this paper we demonstrate the tunneling mechanism in 2D waveguides and how it can be used to design multicavity resonators. We also discuss possible applications in the construction of microlasers and electro-optical beam splitters and switches.

  20. Spacecraft (Mobile Satellite) configuration design study

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The relative costs to procure and operate a two-satellite mobile satellite system designed to operate either in the UHF band of the L Band, and with several antenna diameter options in each frequency band was investigated. As configured, the size of the spacecraft is limited to the current RCA Series 4000 Geosynchronous Communications Spacecraft bus, which spans the range from 4000 to 5800 pounds in the transfer orbit. The Series 4000 bus forms the basis around which the Mobile Satellite transponder and associated antennas were appended. Although the resultant configuration has little outward resemblance to the present Series 4000 microwave communications spacecraft, the structure, attitude control, thermal, power, and command and control subsystems of the Series 4000 spacecraft are all adapted to support the Mobile Satellite mission.

  1. HBCUs Research Conference agenda and abstracts

    NASA Technical Reports Server (NTRS)

    Dutta, Sunil (Compiler)

    1995-01-01

    The purpose of this Historically Black Colleges and Universities (HBCUs) Research conference was to provide an opportunity for principal investigators and their students to present research progress reports. The abstracts included in this report indicate the range and quality of research topics such as aeropropulsion, space propulsion, space power, fluid dynamics, designs, structures and materials being funded through grants from Lewis Research Center to HBCUs. The conference generated extensive networking between students, principal investigators, Lewis technical monitors, and other Lewis researchers.

  2. HBCUs Research Conference Agenda and Abstracts

    NASA Technical Reports Server (NTRS)

    Dutta, Sunil (Compiler)

    1998-01-01

    The purpose of this Historically Black Colleges and Universities (HBCUs) Research Conference was to provide an opportunity for principal investigators and their students to present research progress reports. The abstracts included in this report indicate the range and quality of research topics such as aeropropulsion, space propulsion, space power, fluid dynamics, designs, structures and materials being funded through grants from Lewis Research Center to HBCUs. The conference generated extensive networking between students, principal investigators, Lewis technical monitors, and other Lewis researchers.

  3. HBCUs Research Conference Agenda and Abstracts

    NASA Technical Reports Server (NTRS)

    Dutta, Sunil (Compiler)

    1997-01-01

    The purpose of this Historically Black Colleges and Universities (HBCUS) Research Conference was to provide an opportunity for principal investigators and their students to present research progress reports. The abstracts included in this report indicate the range and quality of research topics such as aeropropulsion, space propulsion, space power, fluid dynamics, designs, structures and materials being funded through grants from Lewis Research Center to HBCUS. The conference generated extensive networking between students, principal investigators, Lewis technical monitors, and other Lewis researchers.

  4. Development of Abstract Grammatical Categorization in Infants

    ERIC Educational Resources Information Center

    Cyr, Marilyn; Shi, Rushen

    2013-01-01

    This study examined abstract syntactic categorization in infants, using the case of grammatical gender. Ninety-six French-learning 14-, 17-, 20-, and 30-month-olds completed the study. In a preferential looking procedure infants were tested on their generalized knowledge of grammatical gender involving pseudonouns and gender-marking determiners.…

  5. Scaffolding Preservice Teachers' WebQuest Design: A Qualitative Study

    ERIC Educational Resources Information Center

    Wang, Feng; Hannafin, Michael J.

    2009-01-01

    This study examined how participating preservice teachers reported their perceptions and use of different scaffolds provided to support their WebQuest design. Sixteen preservice teachers participated in a succession of course activities designed to guide WebQuest design and development. Results indicated that while participants followed, adapted,…

  6. Embracing Wicked Problems: The Turn to Design in Composition Studies

    ERIC Educational Resources Information Center

    Marback, Richard

    2009-01-01

    Recent appeal to the concept of design in composition studies benefits teaching writing in digital media. Yet the concept of design has not been developed enough to fully benefit composition instruction. This article develops an understanding of design as a matter of resolving wicked problems and makes a case for the advantages of this…

  7. Parametric Design Studies on a Direct Liquid Feed Fuel Cell

    NASA Technical Reports Server (NTRS)

    Frank, H. A.; Narayanan, S. R.; Nakamura, B.; Surampudi, S.; Halpert, G.

    1995-01-01

    Parametric design studies were carried out on a direct methanol liquid feed fuel cell employing 1 M MeOH fuel, air and oxygen as oxidant in a 2 inch x 2 inch cell employing polymeric electrolyte membranes. Measurements include voltage-current output parameters, methanol crossover rate, and impedance as a function of several design and operational variables. Design variables are described.

  8. DESIGN ISSUES FOR EVALUATING SEEDLING EXPOSURE STUDIES

    EPA Science Inventory

    Tree seedling studies, covering a wide range of experimental conditions in pollutant treatment, species, facilities, and exposure regimes, have become commonplace in forestry research for assessing the actual and potential environmental effects of air pollutants on forest ecosyst...

  9. Study on Product Innovative Design Process Driven by Ideal Solution

    NASA Astrophysics Data System (ADS)

    Zhang, Fuying; Lu, Ximei; Wang, Ping; Liu, Hui

    Product innovative design in companies today relies heavily on individual members’ experience and creative ideation as well as their skills of integrating creativity and innovation tools with design methods agilely. Creative ideation and inventive ideas generation are two crucial stages in product innovative design process. Ideal solution is the desire final ideas for given problem, and the striving reaching target for product design. In this paper, a product innovative design process driven by ideal solution is proposed. This design process encourages designers to overcome their psychological inertia, to foster creativity in a systematic way for acquiring breakthrough creative and innovative solutions in a reducing sphere of solution-seeking, and results in effective product innovative design rapidly. A case study example is also presented to illustrate the effectiveness of the proposed design process.

  10. Airborne optical tracking control system design study

    NASA Astrophysics Data System (ADS)

    1992-09-01

    The Kestrel LOS Tracking Program involves the development of a computer and algorithms for use in passive tracking of airborne targets from a high altitude balloon platform. The computer receivers track error signals from a video tracker connected to one of the imaging sensors. In addition, an on-board IRU (gyro), accelerometers, a magnetometer, and a two-axis inclinometer provide inputs which are used for initial acquisitions and course and fine tracking. Signals received by the control processor from the video tracker, IRU, accelerometers, magnetometer, and inclinometer are utilized by the control processor to generate drive signals for the payload azimuth drive, the Gimballed Mirror System (GMS), and the Fast Steering Mirror (FSM). The hardware which will be procured under the LOS tracking activity is the Controls Processor (CP), the IRU, and the FSM. The performance specifications for the GMS and the payload canister azimuth driver are established by the LOS tracking design team in an effort to achieve a tracking jitter of less than 3 micro-rad, 1 sigma for one axis.

  11. Cometary particulate analyzer design definition study

    NASA Technical Reports Server (NTRS)

    Utterback, N. G.

    1981-01-01

    A concept for remotely determining the relative abundance of elements contained in cometary particulates collected by a spacecraft was conducted with very encouraging results. The technique utilizes a short high intensity burst of laser radiation to vaporize and ionize collected particulate material. Ions extracted from this laser-produced plasma are analyzed in a time of flight mass spectrometer to yield an atomic mass spectrum representative of the relative abundance of elements in the particulates. A prototype analyzer system was designed, constructed, and tested. Results show that: (1) energy-time focus performs as predicted in improving resolution; (2) power densities sufficient to produce usable ionization efficiencies can be obtained; (3) complex alloys such as stainless steel can be analyzed; and (4) a tiny, simple and reliable laser used in the demonstration easily meets spacecraft power and mass limitations. A mass resolution of 150 was experimentally demonstrated at mass 108, and an analytical extrapolation predicts a resolution sufficient to separate masses 250 and 251.

  12. A study for designing YBCO power transformer

    NASA Astrophysics Data System (ADS)

    Hayashi, H.; Okamoto, H.; Harimoto, T.; Imayoshi, T.; Tomioka, A.; Bouno, T.; Konno, M.; Iwakuma, M.

    2007-10-01

    It is highly expected that superconducting transformers, which are characterized by incombustibility, light weight, and compactness, will be used practically for equipment in substations and office buildings sited in urban areas. In recent years, remarkable improvements in the performance of YBaCuO (YBCO) tape wire have been seen. This kind of tape wire has the property that its critical current is large in a highly magnetic field; and, its use is expected to reduce AC loss by applying slit processing on the tape wire, contributing to future cost reductions. In addition, the development of efficient, economical cryogenic units is also expected. The authors have developed a conceptual design for a 66 kV/20 MVA power transformer using YBCO tape wires, or an YBCO power transformer. As a result, we were able to identify the transformer's optimal system structure including coil winding comprised of coils and tape wires; and, we confirmed that the devised transformer can made to be both compact and highly efficient.

  13. California Education in Environmental Design and Urban Studies.

    ERIC Educational Resources Information Center

    Anderson, Lawrence B.

    The purpose of the study was to examine California's needs in the broad field of environmental design and urban studies. Chapter 1 discusses the purposes, methods, and sources of the study. Chapter 2 deals with the Environmental Design Professions which include: architecture, landscape architecture, city planning, and their educational systems.…

  14. Impact of Design Trade Studies on System Human Resources.

    ERIC Educational Resources Information Center

    Whalen, Gary V.; Askren, William B.

    This study focused on two objectives. The first objective was to identify and classify the characteristics of conceptual design trade studies that have high potential impact on human resource requirements of Air Force weapon systems. The approach used was a case history review and analysis of 129 F-15 aircraft design trade studies. The analysis…

  15. Study designs in dermatology: A review for the clinical dermatologist.

    PubMed

    Silverberg, Jonathan I

    2015-11-01

    A working knowledge of common research study designs and their advantages and disadvantages is necessary for critical reading of the literature by clinicians. However, understanding study designs and related statistical methodologies may be perceived as being complex and difficult to execute. This review aims to provide a practical foundation for basic study designs and to help physicians identify pitfalls that commonly occur in clinical studies and their level of evidence. Topics covered include the pros and cons of observational versus prospectively controlled studies, case-control, cohort, randomized controlled studies, adaptive controlled trials and metaanalyses, and the role of matching in studies. PMID:26475532

  16. Tokamak Fusion Core Experiment: design studies based on superconducting and hybrid toroidal field coils. Design overview

    SciTech Connect

    Flanagan, C.A.

    1984-10-01

    This document is a design overview that describes the scoping studies and preconceptual design effort performed in FY 1983 on the Tokamak Fusion Core Experiment (TFCX) class of device. These studies focussed on devices with all-superconducting toroidal field (TF) coils and on devices with superconducting TF coils supplemented with copper TF coil inserts located in the bore of the TF coils in the shield region. Each class of device is designed to satisfy the mission of ignition and long pulse equilibrium burn. Typical design parameters are: major radius = 3.75 m, minor radius = 1.0 m, field on axis = 4.5 T, plasma current = 7.0 MA. These designs relay on lower hybrid (LHRH) current rampup and heating to ignition using ion cyclotron range of frequency (ICRF). A pumped limiter has been assumed for impurity control. The present document is a design overview; a more detailed design description is contained in a companion document.

  17. Computational wing design studies relating to natural laminar flow

    NASA Technical Reports Server (NTRS)

    Waggoner, Edgar G.

    1986-01-01

    Two research studies are described which directly relate to the application of natural laminar flow (NLF) technology to transonic transport-type wing planforms. Each involved using state-of-the-art computational methods to design three-dimensional wing contours which generate significant runs of favorable pressure gradients. The first study supported the Variable Sweep Transition Flight Experiment and involves design of a full-span glove which extends from the leading edge to the spoiler hinge line on the upper surface of an F-14 outer wing panel. A wing was designed computationally for a corporate transport aircraft in the second study. The resulting wing design generated favorable pressure gradients from the leading edge aft to the mid-chord on both upper and lower surfaces at the cruise design point. Detailed descriptions of the computational design approach are presented along with the various constraints imposed on each of the designs.

  18. Modelling Metamorphism by Abstract Interpretation

    NASA Astrophysics Data System (ADS)

    Dalla Preda, Mila; Giacobazzi, Roberto; Debray, Saumya; Coogan, Kevin; Townsend, Gregg M.

    Metamorphic malware apply semantics-preserving transformations to their own code in order to foil detection systems based on signature matching. In this paper we consider the problem of automatically extract metamorphic signatures from these malware. We introduce a semantics for self-modifying code, later called phase semantics, and prove its correctness by showing that it is an abstract interpretation of the standard trace semantics. Phase semantics precisely models the metamorphic code behavior by providing a set of traces of programs which correspond to the possible evolutions of the metamorphic code during execution. We show that metamorphic signatures can be automatically extracted by abstract interpretation of the phase semantics, and that regular metamorphism can be modelled as finite state automata abstraction of the phase semantics.

  19. Mechanical Engineering Department technical abstracts

    SciTech Connect

    Not Available

    1984-07-01

    The Mechanical Engineering Department publishes abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). General information about the current role and activities of each of the Department's seven divisions precedes the technical abstracts. Further information about a division's work may be obtained from the division leader, whose name is given at the end of each divisional summary. The Department's seven divisions are as follows: Nuclear Test Engineering Division, Nuclear Explosives Engineering Division, Weapons Engineering Division, Energy Systems Engineering Division, Engineering Sciences Division, Magnetic Fusion Engineering Division and Materials Fabrication Division.

  20. Abstract communication for coordinated planning

    NASA Technical Reports Server (NTRS)

    Clement, Bradley J.; Durfee, Edmund H.

    2003-01-01

    work offers evidence that distributed planning agents can greatly reduce communication costs by reasoning at abstract levels. While it is intuitive that improved search can reduce communication in such cases, there are other decisions about how to communicate plan information that greatly affect communication costs. This paper identifies cases independent of search where communicating at multiple levels of abstraction can exponentially decrease costs and where it can exponentially add costs. We conclude with a process for determining appropriate levels of communication based on characteristics of the domain.

  1. Combining genetic association study designs: a GWAS case study.

    PubMed

    Estus, Janice L; Fardo, David W

    2013-01-01

    Genome-wide association studies (GWAS) explore the relationship between genome variability and disease susceptibility with either population- or family-based data. Here, we have evaluated the utility of combining population- and family-based statistical association tests and have proposed a method for reducing the burden of multiple testing. Unrelated singleton and parent-offspring trio cases and controls from the Genetics of Kidneys in Diabetes (GoKinD) study were analyzed for genetic association with diabetic nephropathy (DN) in type 1 diabetics (T1D). The Cochran-Armitage test for trend and the family-based association test were employed using either unrelated cases and controls or trios, respectively. In addition to combining single nucleotide polymorphism (SNP) p-values across these tests via Fisher's method, we employed a novel screening approach to rank SNPs based on conditional power for more efficient testing. Using either the population-based or family-based subset alone predictably limited resolution to detect DN SNPs. For 384,197 SNPs passing quality control (QC), none achieved strict genome-wide significance (1.4 × 10(-7)) using 1171 singletons (577/594 cases/controls) or 1738 pooled singletons and offspring probands (841/897). Similarly, none of the 352,004 SNPs passing QC in 567 family trios (264/303 case/control proband trios) reached genome-wide significance. Testing the top 10 SNPs ranked using aggregated conditional power resulted in two SNPs reaching genome-wide significance, rs11645147 on chromosome 16 (p = 1.74 × 10(-4) < 0.05/10 = 0.005) and rs7866522 on chromosome 9 (p = 0.0033). Efficient usage of mixed designs incorporating both unrelated and family-based data may help to uncover associations otherwise difficult to detect in the presence of massive multiple testing corrections. Capitalizing on the strengths of both types while using screening approaches may be useful especially in light of large-scale, next-generation sequencing and rare

  2. Designing Radiology Outcomes Studies-Essential Principles.

    PubMed

    Kang, Stella K; Mushlin, Alvin I

    2016-07-01

    Health outcomes research is essential to align radiology with current standards of high-value patient care, through the assessment of end results of diagnostic tests, interventions, or policy on patient health. To bridge studies of diagnostic test accuracy and health outcomes research, key considerations include: (1) how to determine when a diagnostic test merits evaluation of impact on outcomes, (2) when study of intermediate/surrogate outcomes can be useful, (3) how to consider the possible harms as well as potential benefits of a test, and (4) how to integrate evidence of an imaging test's efficacy/effectiveness with clinical data to assess outcomes. Due to challenges in conducting studies of long-term outcomes consequent to imaging use, intermediate health outcomes may capture a test's impact on successful diagnosis and therapy, and can provide readily measurable, incremental insights into the role of imaging in health-care delivery and efficiency. In an era marked by recognition of quality and value of care, outcomes research will provide essential evidence to inform radiologists' guidance of imaging use toward improved patient care, creation of clinical guidelines, and policy decisions. PMID:27066756

  3. Details Matter: Designing Skin Microbiome Studies.

    PubMed

    Kong, Heidi H

    2016-05-01

    The use of genomic sequencing to investigate microbes has expanded, yet it has also raised questions regarding optimal approaches to studying the skin microbiome. Meisel et al. show that while whole genome shotgun metagenomic sequences were most similar to expected microbial profiles, sequencing of the hypervariable regions V1-V3 of the 16S ribosomal RNA gene had greater accuracy than sequencing of the hypervariable region V4 in determining genus and species level classifications of prominent skin bacteria. PMID:27107375

  4. ER-20037 LLNL eternal pathfinder wing spar design study report

    SciTech Connect

    Not Available

    1994-03-01

    This document outlines the results of a design study performed by EDO-FSD on the LLNL Eternal Pathfinder Wing Spar/Fuel Tank. The main focus of the design study was the weight minimization of the composite wall of the mid span spar section of the aircraft. The torque, shear, moment and pressure loading requirements, as well as LLNL`s preliminary drawings, were used to develop a reduced weight mid-span spar design. The design study also encompassed details such as the pressure bulkheads, wing rod connectors, and attachment flanges.

  5. FFAG Designs for the International Design Study for the Neutrino Factory

    SciTech Connect

    Berg, J.S.; Machida, S.

    2009-05-04

    The International Design Study for the Neutrino Factory (IDS-NF) aims to produce a design report for a neutrino factory. One component of that design is a linear nonscaling fixed-field alternating gradient accelerator (FFAG) that will accelerate to the final energy of 25 GeV. An FFAG is used to reduce the machine cost by maximizing the number of passes made through the RF cavities. We present some design options for this FFAG, individually optimized for cost. We study the addition of nonlinear magnets to the lattice to improve the performance of the lattice and consider the negative effects of doing so.

  6. Design Evolution Study Thermal Operating Methodology

    SciTech Connect

    T.L. Mitchell

    2002-04-29

    This study provides results supporting the conclusion that the repository can be operated over a varying range of thermal modes and therefore temperatures. In particular, this work focused on limiting the peak, postclosure waste package surface temperature to less than 85 degrees Celsius, a possible limit due to corrosion considerations. These operating modes were compared by varying the waste package in drift spacing (0.1-2.83 meters), drift pitch (drift spacing centerline to centerline of 40-120 meters), ventilation duration (75-300 years), and ventilation efficiency (50-80%). The resulting graphical representation shows where the constant temperature of the waste package (85 degrees Celsius) lies with respect to drift pitch and waste package spacing. The waste considered in this study is the strict youngest fuel first 5 years old fuel. Using only strict youngest fuel first 5 years old fuel in the waste stream results in an average heat load per waste package of 12.48kW/Pkg. With this high average heat load, it is not possible to achieve a maximum waste package surface temperature of 85 degrees Celsius or less. By aging 63% of the strict youngest fuel first 5 years old fuel for 27 years, it becomes possible to maintain the waste package surface temperature at 85 degrees Celsius or less. The 27 years of aging comes from the fact that the repository could be closed in as little as 50 years. It takes 23 years to emplace the waste and therefore the last fuel received for emplacement is 27 years prior to closures. The strict youngest fuel first 5 years old fuel waste stream with 63% aged for 27 years, results in an average power level of 8.4kW/Pkg. This lower heat load allows the controlled parameters of drift pitch, waste package spacing, aging, and ventilation duration to be varied to achieve the desired results. This study compares the hot strict youngest fuel first 5 years old fuel to the previous waste stream, which has an average of 26-year-old fuel. The 26-year

  7. Innovation Abstracts, Volume XIX, 1997.

    ERIC Educational Resources Information Center

    Roueche, Suanne D., Ed.

    1997-01-01

    The 52 abstracts in these 29 serial issues describe innovative approaches to teaching and learning in the community college. Sample topics include a checklist for conference presenters, plan to retain students, faculty home page, improvements in writing instruction, cooperative learning, support for high risk students, competitive colleges and the…

  8. Handedness Shapes Children's Abstract Concepts

    ERIC Educational Resources Information Center

    Casasanto, Daniel; Henetz, Tania

    2012-01-01

    Can children's handedness influence how they represent abstract concepts like "kindness" and "intelligence"? Here we show that from an early age, right-handers associate rightward space more strongly with positive ideas and leftward space with negative ideas, but the opposite is true for left-handers. In one experiment, children indicated where on…

  9. Innovation Abstracts, Volume XX, 1998.

    ERIC Educational Resources Information Center

    Roueche, Suanne D., Ed.

    1998-01-01

    The 52 abstracts in these 29 serial issues describe innovative approaches to teaching and learning in the community college. Sample topics include reading motivation, barriers to academic success, the learning environment, writing skills, leadership in the criminal justice profession, role-playing strategies, cooperative education, distance…

  10. Metaphoric Images from Abstract Concepts.

    ERIC Educational Resources Information Center

    Vizmuller-Zocco, Jana

    1992-01-01

    Discusses children's use of metaphors to create meaning, using as an example the pragmatic and "scientific" ways in which preschool children explain thunder and lightning to themselves. Argues that children are being shortchanged by modern scientific notions of abstractness and that they should be encouraged to create their own explanations of…

  11. Abstract Expressionism. Clip and Save.

    ERIC Educational Resources Information Center

    Hubbard, Guy

    2002-01-01

    Provides information on the art movement, Abstract Expressionism, and includes learning activities. Focuses on the artist Jackson Pollock, offering a reproduction of his artwork, "Convergence: Number 10." Includes background information on the life and career of Pollock and a description of the included artwork. (CMK)

  12. ERGONOMICS ABSTRACTS 48347-48982.

    ERIC Educational Resources Information Center

    Ministry of Technology, London (England). Warren Spring Lab.

    IN THIS COLLECTION OF ERGONOMICS ABSTRACTS AND ANNOTATIONS THE FOLLOWING AREAS OF CONCERN ARE REPRESENTED--GENERAL REFERENCES, METHODS, FACILITIES, AND EQUIPMENT RELATING TO ERGONOMICS, SYSTEMS OF MAN AND MACHINES, VISUAL, AUDITORY, AND OTHER SENSORY INPUTS AND PROCESSES (INCLUDING SPEECH AND INTELLIGIBILITY), INPUT CHANNELS, BODY MEASUREMENTS,…

  13. The Theatre Audience: An Abstraction.

    ERIC Educational Resources Information Center

    Campbell, Paul Newell

    1981-01-01

    Argues that theater is aimed at and presented to an ideal or abstract audience. Discusses the implications of performing for an actual audience, adaptation to various audiences, and the concept of the audience as an evaluative device. (See CS 705 536.) (JMF)

  14. Chemical Abstracts' Document Delivery Service.

    ERIC Educational Resources Information Center

    Rollins, Stephen

    1984-01-01

    The Document Delivery Service offered by Chemical Abstracts is described in terms of the DIALORDER option on the Dialog information retrieval system, mail requests, and requests transmitted through OCLC's Interlibrary Loan system. Transmission costs, success rates, delivery rates, and other considerations in utilizing the service are included.…

  15. On study design in neuroimaging heritability analyses

    NASA Astrophysics Data System (ADS)

    Koran, Mary Ellen; Li, Bo; Jahanshad, Neda; Thornton-Wells, Tricia A.; Glahn, David C.; Thompson, Paul M.; Blangero, John; Nichols, Thomas E.; Kochunov, Peter; Landman, Bennett A.

    2014-03-01

    Imaging genetics is an emerging methodology that combines genetic information with imaging-derived metrics to understand how genetic factors impact observable structural, functional, and quantitative phenotypes. Many of the most well-known genetic studies are based on Genome-Wide Association Studies (GWAS), which use large populations of related or unrelated individuals to associate traits and disorders with individual genetic factors. Merging imaging and genetics may potentially lead to improved power of association in GWAS because imaging traits may be more sensitive phenotypes, being closer to underlying genetic mechanisms, and their quantitative nature inherently increases power. We are developing SOLAR-ECLIPSE (SE) imaging genetics software which is capable of performing genetic analyses with both large-scale quantitative trait data and family structures of variable complexity. This program can estimate the contribution of genetic commonality among related subjects to a given phenotype, and essentially answer the question of whether or not the phenotype is heritable. This central factor of interest, heritability, offers bounds on the direct genetic influence over observed phenotypes. In order for a trait to be a good phenotype for GWAS, it must be heritable: at least some proportion of its variance must be due to genetic influences. A variety of family structures are commonly used for estimating heritability, yet the variability and biases for each as a function of the sample size are unknown. Herein, we investigate the ability of SOLAR to accurately estimate heritability models based on imaging data simulated using Monte Carlo methods implemented in R. We characterize the bias and the variability of heritability estimates from SOLAR as a function of sample size and pedigree structure (including twins, nuclear families, and nuclear families with grandparents).

  16. Southern Orthopaedic Association Abstract Publication Rate.

    PubMed

    Tait, Mark Adam; Petrus, Cara; Barnes, C Lowry

    2016-01-01

    The purpose of this study was to determine the publication rate of manuscripts presented at the Southern Orthopaedic Association's (SOA) annual meetings. An extensive literature search was performed using Google Scholar and PubMed search engines and all accepted abstracts (posters or podium presentations) presented at an SOA annual meeting from 2005 to 2011 were evaluated. A total of 568 abstracts were presented at SOA meetings between 2005 and 2011. Of these, 234 (41%) were published in the peer-reviewed literature. The publication rate was 66% in 2005 and 28% in 2010. The average time from presentation to peer-reviewed publication was 1.6 ± 0.24 years (range, 2 years in 2006 to 1 year in 2011). The SOA publication rate was comparable with other major orthopaedic conference publication rates, yet more than half of all abstracts remain unpublished. SOA attendees should be aware that approximately 40% of all accepted presentations will go unpublished. PMID:27518291

  17. Communicating Qualitative Research Study Designs to Research Ethics Review Boards

    ERIC Educational Resources Information Center

    Ells, Carolyn

    2011-01-01

    Researchers using qualitative methodologies appear to be particularly prone to having their study designs called into question by research ethics or funding agency review committees. In this paper, the author considers the issue of communicating qualitative research study designs in the context of institutional research ethics review and offers…

  18. A Study of Head Start Effectiveness Using a Randomized Design.

    ERIC Educational Resources Information Center

    Abbott-Shim, Martha; Lambert, Richard; McCart, Frances

    Although an extensive body of literature exists on the impact of Head Start, very few studies have used an experimental design with random assignment, a key methodological component needed to increase the weight of evaluation findings. This study used a randomized design with a wide range of outcomes related to school readiness to assess the…

  19. Interior Design Supports Art Education: A Case Study

    ERIC Educational Resources Information Center

    Clemons, Stephanie A.

    2006-01-01

    Interior design, as a field of study, is a rapidly growing area of interest--particularly for teenagers in the United States. Part of this interest stems from the proliferation of design-related reality shows available through television media. Some art educators and curriculum specialists in the nation perceive the study of interior spaces as a…

  20. Preliminary design study for an atomospheric science facility

    NASA Technical Reports Server (NTRS)

    Hutchison, R.

    1972-01-01

    The activities and results of the Atmospheric Science Facility preliminary design study are reported. The objectives of the study were to define the scientific goals, to determine the range of experiment types, and to develop the preliminary instrument design requirements for a reusable, general purpose, optical research facility for investigating the earth's atmosphere from a space shuttle orbital vehicle.

  1. Children as Educational Computer Game Designers: An Exploratory Study

    ERIC Educational Resources Information Center

    Baytak, Ahmet; Land, Susan M.; Smith, Brian K.

    2011-01-01

    This study investigated how children designed computer games as artifacts that reflected their understanding of nutrition. Ten 5th grade students were asked to design computer games with the software "Game Maker" for the purpose of teaching 1st graders about nutrition. The results from the case study show that students were able to express their…

  2. Should Intelligent Design Be Taught in Social Studies Courses?

    ERIC Educational Resources Information Center

    Hess, Diana E.

    2006-01-01

    In this article, the author examines whether the very reasons that explain why intelligent design is controversial in the science curriculum also apply to social studies. She reports what teachers at a recent democratic education conference said about four different lessons on intelligent design that could fit into social studies courses. She…

  3. Preliminary design studies of an advanced general aviation aircraft

    NASA Technical Reports Server (NTRS)

    Barrett, Ron; Demoss, Shane; Dirkzwager, AB; Evans, Darryl; Gomer, Charles; Keiter, Jerry; Knipp, Darren; Seier, Glen; Smith, Steve; Wenninger, ED

    1991-01-01

    The preliminary design results are presented of the advanced aircraft design project. The goal was to take a revolutionary look into the design of a general aviation aircraft. Phase 1 of the project included the preliminary design of two configurations, a pusher, and a tractor. Phase 2 included the selection of only one configuration for further study. The pusher configuration was selected on the basis of performance characteristics, cabin noise, natural laminar flow, and system layouts. The design was then iterated to achieve higher levels of performance.

  4. An analytical study for the design of advanced rotor airfoils

    NASA Technical Reports Server (NTRS)

    Kemp, L. D.

    1973-01-01

    A theoretical study has been conducted to design and evaluate two airfoils for helicopter rotors. The best basic shape, designed with a transonic hodograph design method, was modified to meet subsonic criteria. One airfoil had an additional constraint for low pitching-moment at the transonic design point. Airfoil characteristics were predicted. Results of a comparative analysis of helicopter performance indicate that the new airfoils will produce reduced rotor power requirements compared to the NACA 0012. The hodograph design method, written in CDC Algol, is listed and described.

  5. Adult Education Dissertation Abstracts: 1968-1969.

    ERIC Educational Resources Information Center

    Grabowski, Stanley M., Ed.; Loague, Nehume, Ed.

    This bibliography contains citations, abstracts, and ordering information for 303 dissertations pertinent to the education or training of adults. Studies are classified by broad subject headings used in the ERIC Clearinghouse on Adult Education. Each section of the classification is identified by a four-digit number, with a one-, two-, or…

  6. Contextualising Numeracy: Abstract Tools at the Coalface.

    ERIC Educational Resources Information Center

    Lukin, Annabelle

    1998-01-01

    A social semiotic approach to math is necessary because of the increasing significance of abstract tools in the workplace. A case study from the coal mining industry illustrates the need to recognize mathematics as a socially constructed system and to contextualize math instruction. (SK)

  7. Abstract Schemas in Children's Chess Cognition.

    ERIC Educational Resources Information Center

    Horgan, Dianne; And Others

    The nature and development of semantic processing in chess was investigated in a study involving younger players from 6 through 18 years of age. Efforts were directed toward establishing the assertion that skilled players' memory for chess positions depends largely upon the availability of pre-stored schema (PSS) that are both abstract and…

  8. Situated Learning in an Abstract Algebra Classroom

    ERIC Educational Resources Information Center

    Ticknor, Cindy S.

    2012-01-01

    Advisory committees of mathematics consider abstract algebra as an essential component of the mathematical preparation of secondary teachers, yet preservice teachers find it challenging to connect the topics addressed in this advanced course with the high school algebra they must someday teach. This study analyzed the mathematical content…

  9. Using Group Explorer in Teaching Abstract Algebra

    ERIC Educational Resources Information Center

    Schubert, Claus; Gfeller, Mary; Donohue, Christopher

    2013-01-01

    This study explores the use of Group Explorer in an undergraduate mathematics course in abstract algebra. The visual nature of Group Explorer in representing concepts in group theory is an attractive incentive to use this software in the classroom. However, little is known about students' perceptions on this technology in learning concepts in…

  10. Research designs and making causal inferences from health care studies.

    PubMed

    Flannelly, Kevin J; Jankowski, Katherine R B

    2014-01-01

    This article summarizes the major types of research designs used in healthcare research, including experimental, quasi-experimental, and observational studies. Observational studies are divided into survey studies (descriptive and correlational studies), case-studies and analytic studies, the last of which are commonly used in epidemiology: case-control, retrospective cohort, and prospective cohort studies. Similarities and differences among the research designs are described and the relative strength of evidence they provide is discussed. Emphasis is placed on five criteria for drawing causal inferences that are derived from the writings of the philosopher John Stuart Mill, especially his methods or canons. The application of the criteria to experimentation is explained. Particular attention is given to the degree to which different designs meet the five criteria for making causal inferences. Examples of specific studies that have used various designs in chaplaincy research are provided. PMID:24579956

  11. A Course in Medical Research Study Design and Analysis.

    ERIC Educational Resources Information Center

    Linskey, Mark E.; And Others

    1987-01-01

    A course to familiarize medical students with the principles of good medical research study design and analysis focuses on three types of studies: clinical trials, laboratory science, and epidemiology and biostatistics. (MSE)

  12. Design of Orion Soil Impact Study using the Modern Design of Experiments

    NASA Technical Reports Server (NTRS)

    DeLoach, Richard

    2010-01-01

    Two conventional One Factor At a Time (OFAT) test matrices under consideration for an Orion Landing System subscale soil impact study are reviewed. Certain weaknesses in the designs, systemic to OFAT experiment designs generally, are identified. An alternative test matrix is proposed that is based in the Modern Design of Experiments (MDOE), which achieves certain synergies by combining the original two test matrices into one. The attendant resource savings are quantified and the impact on uncertainty is discussed.

  13. Ecological Research Division Theoretical Ecology Program. [Contains abstracts

    SciTech Connect

    Not Available

    1990-10-01

    This report presents the goals of the Theoretical Ecology Program and abstracts of research in progress. Abstracts cover both theoretical research that began as part of the terrestrial ecology core program and new projects funded by the theoretical program begun in 1988. Projects have been clustered into four major categories: Ecosystem dynamics; landscape/scaling dynamics; population dynamics; and experiment/sample design.

  14. The International Design Study for the Neutrino Factory

    SciTech Connect

    Long, K.

    2008-02-21

    The International Design Study for a future Neutrino Factory and super-beam facility (the ISS) established the physics case for a high-precision programme of long-baseline neutrino-oscillation measurements. The ISS also identified baseline specifications for the Neutrino Factory accelerator complex and the neutrino detector systems. This paper summarises the objectives of the International Design Study for the Neutrino Factory (the IDS-NF). The IDS-NF will build on the work of the ISS to deliver a Reference Design Report for the Neutrino Factory by 2012/13 and an Interim Design Report by 2010/11.

  15. Magnetic suspension and balance system advanced study, 1989 design

    NASA Technical Reports Server (NTRS)

    Boom, Roger W.; Eyssa, Y. M.; Abdelsalam, Moustafa K.; Mcintosh, Glen E.

    1991-01-01

    The objectives are to experimentally confirm several advanced design concepts on the Magnetic Suspension and Balance Systems (MSBS). The advanced design concepts were identified as potential improvements by Madison Magnetics, Inc. (MMI) during 1984 and 1985 studies of an MSBS utilizing 14 external superconductive coils and a superconductive solenoid in an airplane test model suspended in a wind tunnel. This study confirmed several advanced design concepts on magnetic suspension and balance systems. The 1989 MSBS redesign is based on the results of these experiments. Savings of up to 30 percent in supporting magnet ampere meters and 50 percent in energy stored over the 1985 design were achieved.

  16. TQM: A bibliography with abstracts. [total quality management

    NASA Technical Reports Server (NTRS)

    Gottlich, Gretchen L. (Editor)

    1992-01-01

    This document is designed to function as a special resource for NASA Langley scientists, engineers, and managers during the introduction and development of total quality management (TQM) practices at the Center. It lists approximately 300 bibliographic citations for articles and reports dealing with various aspects of TQM. Abstracts are also available for the majority of the citations. Citations are organized by broad subject areas, including case studies, customer service, senior management, leadership, communication tools, TQM basics, applications, and implementation. An introduction and indexes provide additional information on arrangement and availability of these materials.

  17. Advanced wind turbine design studies: Advanced conceptual study. Final report

    SciTech Connect

    Hughes, P; Sherwin, R

    1994-08-01

    In conjunction with the US Department of Energy and the National Renewable Energy Laboratory`s Advanced Wind Turbine Program, the Atlantic Orient Corporation developed preliminary designs for the next generation of wind turbines. These 50 kW and 350 kW turbines are based upon the concept of simplicity. By adhering to a design philosophy that emphasizes simplicity, we project that these turbines will produce energy at extremely competitive rates which will unlock the potential of wind energy domestically and internationally. The program consisted of three distinct phases. First, we evaluated the operational history of the Enertech 44 series wind turbines. As a result of this evaluation, we developed, in the second phase, a preliminary design for a new 50 kW turbine for the near-term market. In the third phase, we took a clean-sheet-of-paper approach to designing a 350 kW turbine focused on the mid-1990s utility market that incorporated past experience and advanced technology.

  18. Transitioning from Marketing-Oriented Design to User-Oriented Design: A Case Study

    ERIC Educational Resources Information Center

    Laster, Shari; Stitz, Tammy; Bove, Frank J.; Wise, Casey

    2011-01-01

    The transition to a new architecture and design for an academic library Web site does not always proceed smoothly. In this case study, a library at a large research university hired an outside Web development contractor to create a new architecture and design for the university's Web site using dotCMS, an open-source content management system. The…

  19. Design Fixation and Cooperative Learning in Elementary Engineering Design Project: A Case Study

    ERIC Educational Resources Information Center

    Luo, Yi

    2015-01-01

    This paper presents a case study examining 3rd, 4th and 5th graders' design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP), was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes.…

  20. Object Classification via Planar Abstraction

    NASA Astrophysics Data System (ADS)

    Oesau, Sven; Lafarge, Florent; Alliez, Pierre

    2016-06-01

    We present a supervised machine learning approach for classification of objects from sampled point data. The main idea consists in first abstracting the input object into planar parts at several scales, then discriminate between the different classes of objects solely through features derived from these planar shapes. Abstracting into planar shapes provides a means to both reduce the computational complexity and improve robustness to defects inherent to the acquisition process. Measuring statistical properties and relationships between planar shapes offers invariance to scale and orientation. A random forest is then used for solving the multiclass classification problem. We demonstrate the potential of our approach on a set of indoor objects from the Princeton shape benchmark and on objects acquired from indoor scenes and compare the performance of our method with other point-based shape descriptors.

  1. An Abstract Plan Preparation Language

    NASA Technical Reports Server (NTRS)

    Butler, Ricky W.; Munoz, Cesar A.

    2006-01-01

    This paper presents a new planning language that is more abstract than most existing planning languages such as the Planning Domain Definition Language (PDDL) or the New Domain Description Language (NDDL). The goal of this language is to simplify the formal analysis and specification of planning problems that are intended for safety-critical applications such as power management or automated rendezvous in future manned spacecraft. The new language has been named the Abstract Plan Preparation Language (APPL). A translator from APPL to NDDL has been developed in support of the Spacecraft Autonomy for Vehicles and Habitats Project (SAVH) sponsored by the Explorations Technology Development Program, which is seeking to mature autonomy technology for application to the new Crew Exploration Vehicle (CEV) that will replace the Space Shuttle.

  2. Cryogenic foam insulation: Abstracted publications

    NASA Technical Reports Server (NTRS)

    Williamson, F. R.

    1977-01-01

    A group of documents were chosen and abstracted which contain information on the properties of foam materials and on the use of foams as thermal insulation at cryogenic temperatures. The properties include thermal properties, mechanical properties, and compatibility properties with oxygen and other cryogenic fluids. Uses of foams include applications as thermal insulation for spacecraft propellant tanks, and for liquefied natural gas storage tanks and pipelines.

  3. Lean, Premixed-Prevaporized (LPP) combustor conceptual design study

    NASA Technical Reports Server (NTRS)

    Dickman, R. A.; Dodds, W. J.; Ekstedt, E. E.

    1979-01-01

    Four combustion systems were designed and sized for the energy efficient engine. A fifth combustor was designed for the cycle and envelope of the twin-spool, high bypass ratio, high pressure ratio turbofan engine. Emission levels, combustion performance, life, and reliability assessments were made for these five combustion systems. Results of these design studies indicate that cruise NOx emission can be reduced by the use of lean, premixed-prevaporaized combustion and airflow modulation.

  4. Concrete and abstract Voronoi diagrams

    SciTech Connect

    Klein, R. )

    1989-01-01

    The Voronoi diagram of a set of sites is a partition of the plane into regions, one to each site, such that the region of each site contains all points of the plane that are closer to this site than to the other ones. Such partitions are of great importance to computer science and many other fields. The challenge is to compute Voronoi diagrams quickly. The problem is that their structure depends on the notion of distance and the sort of site. In this book the author proposes a unifying approach by introducing abstract Voronoi diagrams. These are based on the concept of bisecting curves which are required to have some simple properties that are actually possessed by most bisectors of concrete Voronoi diagrams. Abstract Voronoi diagrams can be computed efficiently and there exists a worst-case efficient algorithm of divide-and-conquer type that applies to all abstract Voronoi diagrams satisfying a certain constraint. The author shows that this constraint is fulfilled by the concrete diagrams based no large classes of metrics in the plane.

  5. Epidemiology and Clinical Research Design, Part 1: Study Types

    PubMed Central

    Manja, Veena; Lakshminrusimha, Satyan

    2015-01-01

    Selecting the best available preventive and therapeutic measures to avoid disability and death is an important goal for all health care practitioners. To achieve this goal, we need to perform studies that determine the value of these measures. In this article, we discuss the possible study designs that can be used for evaluating new approaches to prevention and treatment. The gold standard study design is a randomized, controlled, double-blind trial. In many instances, a randomized controlled trial may not be ethically or practically feasible. Other study types, such as case series, case-control studies, cohort studies, cross-sectional studies, crossover designs, and open-label studies, may be required to hypothesize and evaluate the link between an exposure or predictor variable and an outcome variable. Various study types pertaining to neonatal-perinatal medicine are reviewed in this article. PMID:25848346

  6. AGRICULTURAL HEALTH STUDY/PESTICIDE EXPOSURE STUDY DESIGN

    EPA Science Inventory

    The Agricultural Health Study (AHS) is a prospective epidemiologic study of a large cohort of pesticide applicators and their spouses in Iowa and North Carolina. The Pesticide Exposure Study is a sub-study to evaluate exposure factors and to provide data to assess exposure cla...

  7. Cognitive Networks and Abstract Terminology.

    ERIC Educational Resources Information Center

    Hays, David G.

    The design of codes and formats for information storage must be guided by the requirements of the processes in which the stored information is to be used. In the case of medical data, a code must be designed to facilitate several different processes, including case management, administration, evaluation and research. Design of such a system can be…

  8. Design Languages, Notation Systems, and Instructional Technology: A Case Study

    ERIC Educational Resources Information Center

    Waters, Sandie H.; Gibbons, Andrew S.

    2004-01-01

    Notational systems, used in mature fields of study, are closely related to design languages. The future of a technological field depends on the ability to communicate ideas and changes with others in the field. Instructional technology is one field that can benefit from a notation system enabling designers to duplicate, execute, and communicate…

  9. Meaning Making Using New Media: Learning by Design Case Studies

    ERIC Educational Resources Information Center

    Neville, Mary

    2010-01-01

    This article discusses a study of three Australian middle-years teachers who deployed Learning by Design principles and practice to support multiliteracies learning through students' production of digital/multimodal texts. The aim of the research was to develop an understanding of how three teachers embraced new e-learning pedagogical designs for…

  10. Open Educational Resources: A Delphi Study of Instructional Design Quality

    ERIC Educational Resources Information Center

    Emerson, Marnice K.

    2013-01-01

    The purpose of this modified Delphi research study was to investigate instructional designers' beliefs about the instructional strategies and activities to be included in a universal framework for designing quality, self-directed, multimedia, open educational resources (OERs). With the rapid growth of availability and use of OERs by a widely…

  11. Instructional Design and Online Learning: A Quality Assurance Study

    ERIC Educational Resources Information Center

    Monroe, Rose M.

    2011-01-01

    The purpose of this study was to investigate the difference in the evaluations of online course quality using the Quality Matters model among four groups of reviewers: instructional designers, faculty with subject-matter expertise, peer faculty with no subject-matter expertise, and administrators. A causal-comparative design was utilized to…

  12. Design study for a magnetically supported reaction wheel

    NASA Technical Reports Server (NTRS)

    Stocking, G.; Dendy, J.; Sabnis, A.

    1974-01-01

    Results are described of a study program in which the characteristics of a magnetically supported reaction wheel are defined. Tradeoff analyses are presented for the principal components, which are then combined in several reaction wheel design concepts. A preliminary layout of the preferred configuration is presented along with calculated design and performance parameters. Recommendations are made for a prototype development program.

  13. An Empirical Study on Students' Ability to Comprehend Design Patterns

    ERIC Educational Resources Information Center

    Chatzigeorgiou, Alexander; Tsantalis, Nikolaos; Deligiannis, Ignatios

    2008-01-01

    Design patterns have become a widely acknowledged software engineering practice and therefore have been incorporated in the curricula of most computer science departments. This paper presents an observational study on students' ability to understand and apply design patterns. Within the context of a postgraduate software engineering course,…

  14. Thinking about "Design Thinking": A Study of Teacher Experiences

    ERIC Educational Resources Information Center

    Retna, Kala S.

    2016-01-01

    Schools are continuously looking for new ways of enhancing student learning to equip students with skills that would enable them to cope with twenty-first century demands. One promising approach focuses on design thinking. This study examines teacher's perceptions, experiences and challenges faced in adopting design thinking. There is a lack of…

  15. 23 CFR 650.117 - Content of design studies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... reasons, when applicable, why FEMA criteria (44 CFR 60.3, formerly 24 CFR 1910.3) are demonstrably... BRIDGES, STRUCTURES, AND HYDRAULICS Location and Hydraulic Design of Encroachments on Flood Plains § 650...) Studies by highway agencies shall contain: (1) The hydrologic and hydraulic data and design...

  16. Neutronic design studies for an unattended, low power reactor

    SciTech Connect

    Palmer, R.G.; Durkee, J.W. Jr.

    1986-01-01

    The Los Alamos National Laboratory is involved in the design and demonstrations of a small, long-lived nuclear heat and electric power source for potential applications at remote sites where alternate fossil energy systems would not be cost effective. This paper describes the neutronic design analysis that was performed to arrive at two conceptual designs, one using thermoelectric conversion, the other using an organic Rankine cycle. To meet the design objectives and constraints a number of scoping and optimization studies were carried out. The results of calculations of control worths, temperature coefficients of reactivity and fuel depletion effects are reported.

  17. The Study of the Relationship between Probabilistic Design and Axiomatic Design Methodology. Volume 2

    NASA Technical Reports Server (NTRS)

    Onwubiko, Chin-Yere; Onyebueke, Landon

    1996-01-01

    The structural design, or the design of machine elements, has been traditionally based on deterministic design methodology. The deterministic method considers all design parameters to be known with certainty. This methodology is, therefore, inadequate to design complex structures that are subjected to a variety of complex, severe loading conditions. A nonlinear behavior that is dependent on stress, stress rate, temperature, number of load cycles, and time is observed on all components subjected to complex conditions. These complex conditions introduce uncertainties; hence, the actual factor of safety margin remains unknown. In the deterministic methodology, the contingency of failure is discounted; hence, there is a use of a high factor of safety. It may be most useful in situations where the design structures are simple. The probabilistic method is concerned with the probability of non-failure performance of structures or machine elements. It is much more useful in situations where the design is characterized by complex geometry, possibility of catastrophic failure, sensitive loads and material properties. Also included: Comparative Study of the use of AGMA Geometry Factors and Probabilistic Design Methodology in the Design of Compact Spur Gear Set.

  18. Design study for a 16x zoom lens system for visible surveillance camera

    NASA Astrophysics Data System (ADS)

    Vella, Anthony; Li, Heng; Zhao, Yang; Trumper, Isaac; Gandara-Montano, Gustavo A.; Xu, Di; Nikolov, Daniel K.; Chen, Changchen; Brown, Nicolas S.; Guevara-Torres, Andres; Jung, Hae Won; Reimers, Jacob; Bentley, Julie

    2015-09-01

    *avella@ur.rochester.edu Design study for a 16x zoom lens system for visible surveillance camera Anthony Vella*, Heng Li, Yang Zhao, Isaac Trumper, Gustavo A. Gandara-Montano, Di Xu, Daniel K. Nikolov, Changchen Chen, Nicolas S. Brown, Andres Guevara-Torres, Hae Won Jung, Jacob Reimers, Julie Bentley The Institute of Optics, University of Rochester, Wilmot Building, 275 Hutchison Rd, Rochester, NY, USA 14627-0186 ABSTRACT High zoom ratio zoom lenses have extensive applications in broadcasting, cinema, and surveillance. Here, we present a design study on a 16x zoom lens with 4 groups (including two internal moving groups), designed for, but not limited to, a visible spectrum surveillance camera. Fifteen different solutions were discovered with nearly diffraction limited performance, using PNPX or PNNP design forms with the stop located in either the third or fourth group. Some interesting patterns and trends in the summarized results include the following: (a) in designs with such a large zoom ratio, the potential of locating the aperture stop in the front half of the system is limited, with ray height variations through zoom necessitating a very large lens diameter; (b) in many cases, the lens zoom motion has significant freedom to vary due to near zero total power in the middle two groups; and (c) we discuss the trade-offs between zoom configuration, stop location, packaging factors, and zoom group aberration sensitivity.

  19. Implementing abstract multigrid or multilevel methods

    NASA Technical Reports Server (NTRS)

    Douglas, Craig C.

    1993-01-01

    Multigrid methods can be formulated as an algorithm for an abstract problem that is independent of the partial differential equation, domain, and discretization method. In such an abstract setting, problems not arising from partial differential equations can be treated. A general theory exists for linear problems. The general theory was motivated by a series of abstract solvers (Madpack). The latest version was motivated by the theory. Madpack now allows for a wide variety of iterative and direct solvers, preconditioners, and interpolation and projection schemes, including user callback ones. It allows for sparse, dense, and stencil matrices. Mildly nonlinear problems can be handled. Also, there is a fast, multigrid Poisson solver (two and three dimensions). The type of solvers and design decisions (including language, data structures, external library support, and callbacks) are discussed. Based on the author's experiences with two versions of Madpack, a better approach is proposed. This is based on a mixed language formulation (C and FORTRAN + preprocessor). Reasons for not using FORTRAN, C, or C++ (individually) are given. Implementing the proposed strategy is not difficult.

  20. SUPERFUND TREATABILITY CLEARINGHOUSE: ABSTRACT ON-SITE INCINERATION TESTING OF SHIRCO INFRARED SYSTEMS PORTABLE DEMONSTRATION UNIT-CONTAMINATED SOILS TREATABILITY STUDY

    EPA Science Inventory

    In August of 1986, Shirco was contracted by Dekonta GmbH, a Vest German hazardous waste treatment company, to perform treatability studies at one of the largest dioxin-contaminated sites in the world. The Shirco Infrared process was selected by Dekonta after a two year stud...

  1. Conceptual design study for a teleoperator visual system, phase 1

    NASA Technical Reports Server (NTRS)

    Adams, D.; Grant, C.; Johnson, C.; Meirick, R.; Polhemus, C.; Ray, A.; Rittenhouse, D.; Skidmore, R.

    1972-01-01

    Results are reported for work performed during the first phase of the conceptual design study for a teleoperator visual system. This phase consists of four tasks: General requirements, concept development, subsystem requirements and analysis, and concept evaluation.

  2. New Office Technology: A Study on Curriculum Design.

    ERIC Educational Resources Information Center

    Mulder, Martin

    1989-01-01

    A study collected information about office automation trends, office personnel job profiles, and existing curricula. A curriculum conference was held to design and validate a modular curriculum for office automation. (SK)

  3. Designing SoTL Studies--Part I: Validity

    ERIC Educational Resources Information Center

    Bartsch, Robert A.

    2013-01-01

    This chapter discusses how to improve validity in SoTL studies through generating appropriate measures and using designs that examine causality between an activity and students' performance. [Part II available at EJ1029365.

  4. DESIGN STRATEGIES FOR EPIDEMIOLOGIC STUDIES OF ENVIRONMENTAL IMPACTS ON HEALTH

    EPA Science Inventory

    The papers describes epidemiologic designs and methods in studies of health effects of air pollution, whose implications, however, can be extended to the detection of health effects of other environmental exposures. Recent advances in measurement technology for the assessment of ...

  5. Scenario for concurrent conceptual assembly line design: A case study

    NASA Astrophysics Data System (ADS)

    Mas, F.; Ríos, J.; Menéndez, J. L.

    2012-04-01

    The decision to design and build a new aircraft is preceded by years of research and study. Different disciplines work together throughout the lifecycle to ensure not only a complete functional definition of the product, but also a complete industrialization, a marketing plan, a maintenance plan, etc. This case study focuses on the conceptual design phase. During this phase, the design solutions that will meet the functional and industrial requirements are defined, i.e.: the basic requirements of industrialization. During this phase, several alternatives are studied, and the most attractive in terms of performance and cost requirements is selected. As a result of the study of these alternatives, it is possible to define an early conceptual design of the assembly line and its basic parameters. The plant needs, long cycle jigs & tools or industrial means and human resources with the necessary skills can be determined in advance.

  6. Preliminary design study of advanced multistage axial flow core compressors

    NASA Technical Reports Server (NTRS)

    Wisler, D. C.; Koch, C. C.; Smith, L. H., Jr.

    1977-01-01

    A preliminary design study was conducted to identify an advanced core compressor for use in new high-bypass-ratio turbofan engines to be introduced into commercial service in the 1980's. An evaluation of anticipated compressor and related component 1985 state-of-the-art technology was conducted. A parametric screening study covering a large number of compressor designs was conducted to determine the influence of the major compressor design features on efficiency, weight, cost, blade life, aircraft direct operating cost, and fuel usage. The trends observed in the parametric screening study were used to develop three high-efficiency, high-economic-payoff compressor designs. These three compressors were studied in greater detail to better evaluate their aerodynamic and mechanical feasibility.

  7. Design and analysis study of a spacecraft optical transceiver package

    NASA Technical Reports Server (NTRS)

    Lambert, S. G.

    1985-01-01

    A detailed system level design of an Optical Transceiver Package (OPTRANSPAC) for a deep space vehicle whose mission is outer planet exploration is developed. In addition to the terminal design, this study provides estimates of the dynamic environments to be encountered by the transceiver throughout its mission life. Optical communication link analysis, optical thin lens design, electronic functional design and mechanical layout and packaging are employed in the terminal design. Results of the study describe an Optical Transceiver Package capable of communicating to an Earth Orbiting Relay Station at a distance of 10 Astronomical Units (AU) and data rates up to 100 KBPS. The transceiver is also capable of receiving 1 KBPS of command data from the Earth Relay. The physical dimensions of the terminal are contained within a 3.5' x 1.5' x 2.0' envelope and the transceiver weight and power are estimated at 52.2 Kg (115 pounds) and 57 watts, respectively.

  8. Supersonic civil airplane study and design: Performance and sonic boom

    NASA Technical Reports Server (NTRS)

    Cheung, Samson

    1995-01-01

    Since aircraft configuration plays an important role in aerodynamic performance and sonic boom shape, the configuration of the next generation supersonic civil transport has to be tailored to meet high aerodynamic performance and low sonic boom requirements. Computational fluid dynamics (CFD) can be used to design airplanes to meet these dual objectives. The work and results in this report are used to support NASA's High Speed Research Program (HSRP). CFD tools and techniques have been developed for general usages of sonic boom propagation study and aerodynamic design. Parallel to the research effort on sonic boom extrapolation, CFD flow solvers have been coupled with a numeric optimization tool to form a design package for aircraft configuration. This CFD optimization package has been applied to configuration design on a low-boom concept and an oblique all-wing concept. A nonlinear unconstrained optimizer for Parallel Virtual Machine has been developed for aerodynamic design and study.

  9. Fluid design studies of integrated modular engine system

    NASA Technical Reports Server (NTRS)

    Frankenfield, Bruce; Carek, Jerry

    1993-01-01

    A study was performed to develop a fluid system design and show the feasibility of constructing an integrated modular engine (IME) configuration, using an expander cycle engine. The primary design goal of the IME configuration was to improve the propulsion system reliability. The IME fluid system was designed as a single fault tolerant system, while minimizing the required fluid components. This study addresses the design of the high pressure manifolds, turbopumps and thrust chambers for the IME configuration. A physical layout drawing was made, which located each of the fluid system components, manifolds and thrust chambers. Finally, a comparison was made between the fluid system designs of an IME system and a non-network (clustered) engine system.

  10. Word Processing/Text Editing and the Quality of Student Abstracts.

    ERIC Educational Resources Information Center

    O'Brien, George E.; Pizzini, Edward L.

    1986-01-01

    This study demonstrated that abstracts composed with the aid of a computer were rated higher than those without a computer. Categories assessed included spelling/punctuation, organization/design, sentence structure, clarity, and overall quality. Subjects were 68 students participating in the 1984 Secondary Student Training (SST) Research Program…

  11. Operating System Abstraction Layer (OSAL)

    NASA Technical Reports Server (NTRS)

    Yanchik, Nicholas J.

    2007-01-01

    This viewgraph presentation reviews the concept of the Operating System Abstraction Layer (OSAL) and its benefits. The OSAL is A small layer of software that allows programs to run on many different operating systems and hardware platforms It runs independent of the underlying OS & hardware and it is self-contained. The benefits of OSAL are that it removes dependencies from any one operating system, promotes portable, reusable flight software. It allows for Core Flight software (FSW) to be built for multiple processors and operating systems. The presentation discusses the functionality, the various OSAL releases, and describes the specifications.

  12. IEEE conference record--Abstracts

    SciTech Connect

    Not Available

    1992-01-01

    The following topics were covered in this meeting: basic plasma phenomena and plasma waves; plasma diagnostics; space plasma diagnostics; magnetic fusion; electron, ion and plasma sources; intense electron and ion beams; intense beam microwaves; fast wave M/W devices; microwave plasma interactions; plasma focus; ultrafast Z-pinches; plasma processing; electrical gas discharges; fast opening switches; magnetohydrodynamics; electromagnetic and electrothermal launchers; x-ray lasers; computational plasma science; solid state plasmas and switches; environmental/energy issues in plasma science; vacuum electronics; plasmas for lighting; gaseous electronics; and ball lightning and other spherical plasmas. Separate abstracts were prepared for 278 papers of this conference.

  13. Removing the impact of water abstractions on flow duration curves

    NASA Astrophysics Data System (ADS)

    Masoero, Alessandro; Ganora, Daniele; Galeati, Giorgio; Laio, Francesco; Claps, Pierluigi

    2015-04-01

    on few easy-access parameters, of correction of the water abstraction impact. The model, based on an exponential form of the river Flow Duration Curve (FDC), allows completely analytical solutions. Hence the method can be applied extensively. This is particularly relevant when working on a general outlook on water resources (regional or basin scale), given the high number of water abstractions that should be considered. The correction method developed is based on only two hard data that can be easily found: i) the design maximum discharge of the water intake and ii) the days of exercise, between a year. Following the same correction hypothesis also the abstracted discharge statistics have been reconstructed analytically and combined with the statistics of the receiving reach, that can be different from the original one. This information can be useful when we are assessing water availability in a river network interconnected by derivation channels. The goodness of the correction method proposed is proven by the application to a case study in North-West Italy, along a second order tributary of the Po River. Flow values recorded at the river gauge station were affected, significantly, by the presence of a 5 MW hydropower plant. Knowing the amount of water abstracted daily by the power plant we are able to reconstruct, empirically, the natural discharge on the river and compare its main statistics with the ones computed analytically using the proposed correction model. An extremely low difference between empirical and analytical reconstructed mean discharge and L-moment of variation was founded. Also, the importance of the day of exercise information was highlighted. The correction proposed in this work is able to give a correct indication of the non-impacted natural streamflows characteristics, especially in alpine regions where water abstraction impact is a main issue.

  14. Better Cancer Biomarker Discovery Through Better Study Design

    PubMed Central

    Rundle, Andrew; Ahsan, Habibul; Vineis, Paolo

    2013-01-01

    Background High through-put laboratory technologies coupled with sophisticated bioinformatics algorithms have tremendous potential for discovering novel biomarkers, or profiles of biomarkers, that could serve as predictors of disease risk, response to treatment or prognosis. We discuss methodological issues in wedding high through-put approaches for biomarker discovery with the case-control study designs typically used in biomarker discovery studies, especially focusing on nested case-control designs. Methods We review principles for nested case-control study design in relation to biomarker discovery studies and describe how the efficiency of biomarker discovery can be effected by study design choices. We develop a simulated prostate cancer cohort data set and a series of biomarker discovery case-control studies nested within the cohort to illustrate how study design choices can influence biomarker discovery process. Result Common elements of nested case-control design, incidence density sampling and matching of controls to cases, are not typically factored correctly into biomarker discovery analyses, inducing bias in the discovery process. We illustrate how incidence density sampling and matching of controls to cases reduces the apparent specificity of truly valid biomarkers “discovered” in a nested case-control study. We also propose and demonstrate a new case-control matching protocol, we call “anti-matching”, that improves the efficiency of biomarker discovery studies. Conclusions For a valid, but as yet undiscovered, biomarker(s) disjunctions between correctly designed epidemiologic studies and the practice of biomarker discovery reduce the likelihood that true biomarker(s) will be discovered and increases the false positive discovery rate. PMID:22998109

  15. Structural Design Feasibility Study for the Global Climate Experiment

    SciTech Connect

    Lewin,K.F.; Nagy, J.

    2008-12-01

    Neon, Inc. is proposing to establish a Global Change Experiment (GCE) Facility to increase our understanding of how ecological systems differ in their vulnerability to changes in climate and other relevant global change drivers, as well as provide the mechanistic basis for forecasting ecological change in the future. The experimental design was initially envisioned to consist of two complementary components; (A) a multi-factor experiment manipulating CO{sub 2}, temperature and water availability and (B) a water balance experiment. As the design analysis and cost estimates progressed, it became clear that (1) the technical difficulties of obtaining tight temperature control and maintaining elevated atmospheric carbon dioxide levels within an enclosure were greater than had been expected and (2) the envisioned study would not fit into the expected budget envelope if this was done in a partially or completely enclosed structure. After discussions between NEON management, the GCE science team, and Keith Lewin, NEON, Inc. requested Keith Lewin to expand the scope of this design study to include open-field exposure systems. In order to develop the GCE design to the point where it can be presented within a proposal for funding, a feasibility study of climate manipulation structures must be conducted to determine design approaches and rough cost estimates, and to identify advantages and disadvantages of these approaches including the associated experimental artifacts. NEON, Inc requested this design study in order to develop concepts for the climate manipulation structures to support the NEON Global Climate Experiment. This study summarizes the design concepts considered for constructing and operating the GCE Facility and their associated construction, maintenance and operations costs. Comparisons and comments about experimental artifacts, construction challenges and operational uncertainties are provided to assist in selecting the final facility design. The overall goal

  16. Child Development and Social Studies Curriculum Design: Toward a Rationale.

    ERIC Educational Resources Information Center

    Knox, Gary A.

    This paper is a working draft of a study which has examined the accumulated research on child growth and development. The draft is designed as an input paper to enable the Marin Social Studies Project to refine its rationale and criteria for a recommended K-12 social studies program of curriculum options. Identification of the capabilities of…

  17. Block 2 SRM conceptual design studies. Volume 1, Book 1: Conceptual design package

    NASA Technical Reports Server (NTRS)

    Smith, Brad; Williams, Neal; Miller, John; Ralston, Joe; Richardson, Jennifer; Moore, Walt; Doll, Dan; Maughan, Jeff; Hayes, Fred

    1986-01-01

    The conceptual design studies of a Block 2 Solid Rocket Motor (SRM) require the elimination of asbestos-filled insulation and was open to alternate designs, such as case changes, different propellants, modified burn rate - to improve reliability and performance. Limitations were placed on SRM changes such that the outside geometry should not impact the physical interfaces with other Space Shuttle elements and should have minimum changes to the aerodynamic and dynamic characteristics of the Space Shuttle vehicle. Previous Space Shuttle SRM experience was assessed and new design concepts combined to define a valid approach to assured flight success and economic operation of the STS. Trade studies, preliminary designs, analyses, plans, and cost estimates are documented.

  18. Design and study of programmable ring oscillator using IDUDGMOSFET

    NASA Astrophysics Data System (ADS)

    Mukherjee, Sagar; Roy, Swarnil; Koley, Kalyan; Dutta, Arka; Sarkar, Chandan Kumar

    2016-03-01

    In this paper, a novel RF range programmable ring oscillator is designed using independently driven underlap double gate (IDUDG) MOSFET and its performance is studied. The study also presents the variation in analog parameters of the designed oscillator circuit considering different source/drain (S/D) lateral straggle lengths of the IDUDGMOS device. The primary objective behind the programmable oscillator design is the variation of frequency with number of inverter stages and the back gate voltage of IDUDGMOS. The analog parameters analyzed are, the bandwidth, the Total Harmonic Distortion (THD), the linearity and the power consumption of the circuit. The proposed circuit reduces power loss and presents larger bandwidth than other established oscillator circuit designs. The study also shows that IDUDGMOS with larger S/D straggle length improves bandwidth of the oscillator circuit.

  19. Vestibular Function Research (VFR) experiment. Phase B: Design definition study

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The Vestibular Functions Research (VFR) Experiment was established to investigate the neurosensory and related physiological processes believed to be associated with the space flight nausea syndrome and to develop logical means for its prediction, prevention and treatment. The VFR Project consists of ground and spaceflight experimentation using frogs as specimens. The phase B Preliminary Design Study provided for the preliminary design of the experiment hardware, preparation of performance and hardware specification and a Phase C/D development plan, establishment of STS (Space Transportation System) interfaces and mission operations, and the study of a variety of hardware, experiment and mission options. The study consist of three major tasks: (1) mission mode trade-off; (2) conceptual design; and (3) preliminary design.

  20. Using Group Explorer in teaching abstract algebra

    NASA Astrophysics Data System (ADS)

    Schubert, Claus; Gfeller, Mary; Donohue, Christopher

    2013-04-01

    This study explores the use of Group Explorer in an undergraduate mathematics course in abstract algebra. The visual nature of Group Explorer in representing concepts in group theory is an attractive incentive to use this software in the classroom. However, little is known about students' perceptions on this technology in learning concepts in abstract algebra. A total of 26 participants in an undergraduate course studying group theory were surveyed regarding their experiences using Group Explorer. Findings indicate that all participants believed that the software was beneficial to their learning and described their attitudes regarding the software in terms of using the technology and its helpfulness in learning concepts. A multiple regression analysis reveals that representational fluency of concepts with the software correlated significantly with participants' understanding of group concepts yet, participants' attitudes about Group Explorer and technology in general were not significant factors.