Science.gov

Sample records for ac joint cc

  1. The prevalence of chondrocalcinosis (CC) of the acromioclavicular (AC) joint on chest radiographs and correlation with calcium pyrophosphate dihydrate (CPPD) crystal deposition disease.

    PubMed

    Parperis, Konstantinos; Carrera, Guillermo; Baynes, Keith; Mautz, Alan; Dubois, Melissa; Cerniglia, Ross; Ryan, Lawrence M

    2013-09-01

    Digital imaging combined with picture archiving and communication system (PACS) access allows detailed image retrieval and magnification. Calcium pyrophosphate dihydrate (CPPD) crystals preferentially deposit in fibrocartilages, the cartilage of the acromioclavicular (AC) joint being one such structure. We sought to determine if examination of the AC joints on magnified PACS imaging of chest films would be useful in identifying chondrocalcinosis (CC). Retrospective radiographic readings and chart reviews involving 1,920 patients aged 50 or more who had routine outpatient chest radiographs over a 4-month period were performed. Knee radiographs were available for comparison in 489 patients. Medical records were reviewed to abstract demographics, chest film reports, and diagnoses. AC joint CC was identified in 1.1 % (21/1,920) of consecutive chest films. Patients with AC joint CC were 75 years of age versus 65.4 in those without CC (p < 0.0002). Four hundred eighty-nine patients had knee films. Six of these patients had AC joint CC, and of these, five also had knee CC (83 %). Of the 483 without AC joint CC, 62 (12 %) had knee CC (p = 0.002). Patients with AC joint CC were more likely to have a recorded history of CPPD crystal deposition disease than those without AC joint CC (14 versus 1 %, p = 0.0017). The prevalence of AC joint CC increases with age and is associated with knee CC. A finding of AC joint CC should heighten suspicion of pseudogout or secondary osteoarthritis in appropriate clinical settings and, in a young patient, should alert the clinician to the possibility of an associated metabolic condition.

  2. Characterization of Brazed Joints of C-C Composite to Cu-clad-Molybdenum

    NASA Technical Reports Server (NTRS)

    Singh, M.; Asthana, R.

    2008-01-01

    Carbon-carbon composites with either pitch+CVI matrix or resin-derived matrix were joined to copper-clad molybdenum using two active braze alloys, Cusil-ABA (1.75% Ti) and Ticusil (4.5% Ti). The brazed joints revealed good interfacial bonding, preferential precipitation of Ti at the composite/braze interface, and a tendency toward de-lamination in resin-derived C-C composite due to its low inter-laminar shear strength. Extensive braze penetration of the inter-fiber channels in the pitch+CVI C-C composites was observed. The relatively low brazing temperatures (<950 C) precluded melting of the clad layer and restricted the redistribution of alloying elements but led to metallurgically sound composite joints. The Knoop microhardness (HK) distribution across the joint interfaces revealed sharp gradients at the Cu-clad-Mo/braze interface and higher hardness in Ticusil (approx.85-250 HK) than in Cusil-ABA (approx.50-150 HK). These C-C/Cu-clad-Mo joints with relatively low thermal resistance may be promising for thermal management applications.

  3. Active Metal Brazing and Characterization of Brazed Joints in C-C and C-SiC Composites to Copper-Clad-Molybdenum System

    NASA Technical Reports Server (NTRS)

    Singh, M.; Asthana, R.

    2008-01-01

    Carbon/carbon composites with CVI and resin-derived matrices, and C/SiC composites reinforced with T-300 carbon fibers in a CVI SiC matrix were joined to Cu-clad Mo using two Ag-Cu braze alloys, Cusil-ABA (1.75% Ti) and Ticusil (4.5% Ti). The brazed joints revealed good interfacial bonding, preferential precipitation of Ti at the composite/braze interface, and a tendency toward delamination in resin-derived C/C composite. Extensive braze penetration of the inter-fiber channels in the CVI C/C composites was observed. The Knoop microhardness (HK) distribution across the C/C joints indicated sharp gradients at the interface, and a higher hardness in Ticusil than in Cusil-ABA. For the C/SiC composite to Cu-clad-Mo joints, the effect of composite surface preparation revealed that ground samples did not crack whereas unground samples cracked. Calculated strain energy in brazed joints in both systems is comparable to the strain energy in a number of other ceramic/metal systems. Theoretical predictions of the effective thermal resistance suggest that such joined systems may be promising for thermal management applications.

  4. Regular structures in 5CB liquid crystals under the joint action of ac and dc voltages

    NASA Astrophysics Data System (ADS)

    Aguirre, Luis E.; Anoardo, Esteban; Éber, Nándor; Buka, Ágnes

    2012-04-01

    A nematic liquid crystal with high, positive dielectric anisotropy (5CB) has been studied under the influence of the combined action of a dc and an ac electric field. Broad frequency, voltage, and cell thickness ranges were considered. Pattern morphologies were identified; the thresholds and critical wave numbers were measured and analyzed as a function of frequency, dc-to-ac voltage ratio, and thickness. The current-voltage characteristics were simultaneously detected.

  5. A comparison of primary and passaged chondrocytes for use in engineering the temporomandibular joint

    PubMed Central

    Johns, D.E.; Athanasiou, K.A.

    2009-01-01

    Objective This study examines the tissue engineering potential of passaged (P3) and primary (P0) articular chondrocytes (ACs) and costal chondrocytes (CCs) from skeletally-mature goats for use in the temporomandibular joint (TMJ). Design These four cell types were assembled into scaffoldless tissue engineered constructs and cultured for 4 wks. The constructs were then tested for cell, collagen, and glycosaminoglycan (GAG) content with biochemical assays, and collagen types I and II with enzyme-linked immunosorbent assays. Constructs were also tested under tension and compression to determine biomechanical properties. Results Both primary and passaged CC constructs had greater GAG/wet weight than AC constructs. Primary AC constructs had significantly less total collagen and contained no collagen type I. AC P3 constructs had the largest collagen I/collagen II ratio, which was also greater in passaged CC constructs relative to primary groups. Primary AC constructs were not mechanically testable, while passaged AC and CC constructs had significantly greater tensile properties than primary CC constructs. Conclusions Primary CCs are considerably better than primary ACs and have potential use in tissue engineering when larger quantities of collagen type II are desired. The poor performance of the ACs, in this study, which contradicts the results seen with previous studies using immature bovine ACs, may thus be attributed to the animals’ maturity. However, CC P3 cells appear particularly well-suited for tissue engineering fibrocartilage of the TMJ due to the high quantity of collagen and GAG, and tensile and compressive mechanical properties. PMID:19013549

  6. Arthroscopic reconstruction of chronic AC joint dislocations by transposition of the coracoacromial ligament augmented by the Tight Rope device: a technical note.

    PubMed

    Hosseini, Hamid; Friedmann, Svenja; Tröger, Markus; Lobenhoffer, Philipp; Agneskirchner, Jens D

    2009-01-01

    We present a new arthroscopic technique for chronic AC joint dislocations with coracoacromial ligament transposition and augmentation by the Tight Rope device (Arthrex, Naples, USA). First the glenohumeral joint is visualised to repair concomitant lesions, such as SLAP lesions, if needed. Once the rotator interval is opened and the coracoid is identified, the arthroscope is moved to an additional anterolateral portal. A 1.5 cm incision is made 2 cm medial to the AC joint. After drilling a 4 mm hole with a cannulated drill through the clavicle and coracoid a Tight Rope is inserted, the clavicule is reduced and stabilized with the implant. The arthroscope is moved to the subacromial space and a partial bursectomy is performed to visualise the CA ligament and lateral clavicle. The CA ligament is armed with a strong braided suture using a Lasso stitch and dissected from the undersurface of the acromion. It is then reattached to the distal part of the clavicle by transosseous suture fixation after abrasion of its undersurface. Although this combined arthroscopic procedure of AC joint augmentation with a Tight Rope combined with a ligament transposition is technically demanding, it is a safe method to reconstruct the coracoclavicular ligaments and achieve a sufficient reduction of the clavicle without the need of further implant removal or autologous tendon transplantation.

  7. CC-1088 Celgene.

    PubMed

    Dredge, Keith

    2005-05-01

    CC-1088, a thalidomide analog inhibitor of phosphodiesterase 4, was being developed by Celgene for the potential treatment of inflammatory diseases and myelodysplastic syndromes, and had undergone clinical trials. By April 2005, however, the company was no longer developing CC-1088, with CC-10004 presumed to be the preferred compound.

  8. OASIS-CC presentation

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The Operations and Science Instrument Support (OASIS) project is a long-term effort to help produce operations capabilities that can support space science missions of the next century. Portions of the OASIS concept in software have been implemented under the general name OASIS-R/T. OASIS-CC is the OASIS Command and Control, for monitoring and controlling science instruments and spacecraft during test, integration, launch and on-orbit operations. Viewgraphs are presented on the OASIS-CC functionality description, OASIS-CC support, and OASIS-CC as a tool.

  9. Actinium-225 conjugates of MAb CC49 and humanized delta CH2CC49.

    PubMed

    Kennel, Stephen J; Brechbiel, Martin W; Milenic, Diane E; Schlom, Jeffrey; Mirzadeh, Saed

    2002-04-01

    Radioisotopes with moderate half-lives are essential for conventional radioimmunotherapy using tumor-selective MAbs which require days for localization. Actinium-225, with a half-life of 10 days and a yield of 4 alpha particles in its decay chain, may be an ideal choice for tumor-targeted radioimmunotherapy. Release of daughter radioisotopes from the primary chelator after the first decay has been a complication with the use of 225Ac. It has been reported that the domain-deleted product of MAb CC49, Hu-delta CH2 CC49, is able to extravasate and penetrate more deeply into tumors than the parent IgG molecule. We reasoned that once the 225Ac-chelate-MAb had penetrated into the tumor, the daughter radioisotopes would remain trapped even if they had been released from the primary chelator. Actinium-225 HEHA MAb CC49 conjugates were tested for distribution, micro-distribution and therapy in immunocompromised mice which had LS174T tumors growing at subcutaneous or intramuscular sites. Both 125I and 225Ac CC49 and Hu-delta CH2 CC49 were efficient in delivery of the radioisotopes to tumor sites. Tissue micro-autoradiography for the two antibody forms did not demonstrate any differences in micro-distribution of either 125I or 225Ac in the tumor. Furthermore, there was no detectable difference for the two carriers in the tumor retention of daughter radioisotopes from 225Ac. Therapy experiments with 225Ac were complicated by radiotoxicity of the conjugates. The lethal dose was about 0.5 microCi in two strains of mice regardless of the carrier. At injected doses of 0.5 and 0.25 microCi, CC49 was slightly active in tumor stasis, whereas no consistent significant effect of 225Ac-Hu-delta CH2 CC49 on growth of tumors was observed. The potential of 225Ac in radioimmunotherapy is limited by the radiotoxicity of its daughter radioisotopes. Its potential will only be realized if stable conjugates, capable of daughter radioisotope retention, can be devised.

  10. Brazing C-C composites to metals

    SciTech Connect

    Liu, J.Y.; Banerjee, P.; Chin, B.A.

    1994-12-31

    Carbon-carbon composites are attractive for use at high temperature because of their high strength, modulus, chemical stability and resistance to activation by radiation. In these applications, the C-C composite must be joined to itself and to metals. The research described in this paper has led to the invention of a new brazing filler metal from the Cu-Mu-Ti system and the development of a brazing process for joining CC composites to metals. The newly invented brazing filler metal compositions, with controllable melting points ranging from 800{emdash}920{degrees}C has excellent wettability on both C-C composites and metals (stainless steel, Nb, Mo, W, and Zr). Sound joints of C-C composite/metal were produced using the brazing filler metal and the specially developed brazing processes. Finite element analyses were used to predict the residual stress distribution in the brazed joints. Theoretical predictions were confirmed by interlayer experiments. The brazed joints were studied using optical and scanning electron microscopy (SEM) to examine the microstructure and fractured brazed joints. The results showed 100% bonding was obtained using the developed braze metal and brazing procedure.

  11. CC-5013 (Celgene).

    PubMed

    Mitsiades, Constantine S; Mitsiades, Nicholas

    2004-06-01

    Celgene, in collaboration with the National Cancer Institute, is developing CC-5013, the lead compound in a series of thalidomide derivatives that inhibit TNFalpha overproduction, for the potential treatment of hematological and solid tumor cancers and inflammatory diseases.

  12. Reconstruction of displaced acromio-clavicular joint dislocations using a triple suture-cerclage: description of a safe and efficient surgical technique

    PubMed Central

    2012-01-01

    Purpose In this retrospective study we investigated the clinical and radiological outcome after operative treatment of acute Rockwood III-V injuries of the AC-joint using two acromioclavicular (AC) cerclages and one coracoclavicular (CC) cerclage with resorbable sutures. Methods Between 2007 and 2009 a total of 39 patients fit the inclusion criteria after operative treatment of acute AC joint dislocation. All patients underwent open reduction and anatomic reconstruction of the AC and CC-ligaments using PDS® sutures (Polydioxane, Ethicon, Norderstedt, Germany). Thirty-three patients could be investigated at a mean follow up of 32±9 months (range 24–56 months). Results The mean Constant score was 94.3±7.1 (range 73–100) with an age and gender correlated score of 104.2%±6.9 (88-123%). The DASH score (mean 3.46±6.6 points), the ASES score (94.6±9.7points) and the Visual Analogue Scale (mean 0.5±0,6) revealed a good to excellent clinical outcome. The difference in the coracoclavicular distance compared to the contralateral side was <5 mm for 28 patients, between 5-10 mm for 4 patients, and more than 10 mm for another patient. In the axial view, the anterior border of the clavicle was within 1 cm (ventral-dorsal direction) of the anterior rim of the acromion in 28 patients (85%). Re-dislocations occured in three patients (9%). Conclusion Open AC joint reconstruction using AC and CC PDS cerclages provides good to excellent clinical results in the majority of cases. However, radiographically, the CC distance increased significantly at final follow up, but neither the amount of re-dislocation nor calcifications of the CC ligaments or osteoarthritis of the AC joint had significant influence on the outcome. Level of evidence Case series, Level IV PMID:23098339

  13. Acromioclavicular Joint Separations

    DTIC Science & Technology

    2013-01-01

    non-surgical measures, high-grade inju- ries frequently warrant surgical intervention to minimize pain and maximize shoulder function. Factors such as...sports [1–3]. While most injuries can be managed non-operatively, high-grade separations may result in per- sistent pain or functional decline and...joint pathology (cross arm adduction and loading of the AC joint) can be helpful to localize shoulder pain to the AC joint. These tests are especial- ly

  14. Joining C/C composite to copper using active Cu-3.5Si braze

    NASA Astrophysics Data System (ADS)

    Shen, Yuanxun; Li, Zhenglin; Hao, Chuanyong; Zhang, Jinsong

    2012-02-01

    A simple technique was developed to join C/C composite to Cu using active Cu-3.5Si braze for nuclear thermal applications. The brazing alloy exhibited good wettability on C/C substrate due to the reaction layer formed at the interface. A strong interfacial bond of the brazing alloy on C/C with the formation of TiC + SiC + Ti 5Si 3 reaction layer was obtained. The produced CC/Cu/CuCrZr joint exhibited shear strength as high as 79 MPa and excellent thermal resistance during the thermal shock tests.

  15. Peptide backbone folding induced by the C(alpha)-tetrasubstituted cyclic alpha-amino acids 4-amino-1,2-dithiolane-4-carboxylic acid (Adt) and 1-aminocyclopentane-1-carboxylic acid (Ac5c). A joint computational and experimental study.

    PubMed

    Aschi, Massimiliano; Lucente, Gino; Mazza, Fernando; Mollica, Adriano; Morera, Enrico; Nalli, Marianna; Paglialunga Paradisi, Mario

    2003-06-07

    The conformational study of a new group of synthetic peptides containing 4-amino-1,2-dithiolane-4-carboxylic acid (Adt), a cysteine-related achiral residue, has been carried out through a joint application of computational and experimental methodologies. Molecular Dynamics simulations clearly suggest the tendency of this molecule to adopt a gamma-turn conformation in vacuum and help in analyzing the complex and crucial conformational behaviour of the dithiolane ring which appears to preferentially adopt a C(S)-like structure. Electronic structure calculations carried out in solution using the Density Functional Theory also indicate the preservation of the gamma-like folding in apolar solvents and the helix-like one in more polar solvents. A comparison with the achiral 1-aminocycloalkane-1-carboxylic acid (Ac5c) has been carried out using the same computational tools. NMR and IR data on dipeptide derivatives containing the Adt or Ac5c residue show that in chloroform solution all the models prefer a gamma-turn structure, centered at the cyclic residue, stabilized by an intramolecular H-bond, whereas in a more polar solvent, i.e. dimethyl sulfoxide, this folding is not maintained. The experimental conformational studies, extended to N-Boc protected tripeptides, clearly indicate the remarkable tendency of both the five-membered C(alpha)-tetrasubstituted cyclic amino acids Adt and Ac5c to induce the gamma-turn structure also in models able to adopt the beta-bend conformation.

  16. Active Brazing of C/C Composite to Copper by AgCuTi Filler Metal

    NASA Astrophysics Data System (ADS)

    Zhang, Kexiang; Xia, Lihong; Zhang, Fuqin; He, Lianlong

    2016-05-01

    Brazing between the carbon-fiber-reinforced carbon composite (C/C composite) and copper has gained increasing interest because of its important application in thermal management systems in nuclear fusion reactors and in the aerospace industry. In order to examine the "interfacial shape effect" on the mechanical properties of the joint, straight and conical interfacial configurations were designed and machined on the surface of C/C composites before joining to copper using an Ag-68.8Cu-4.5Ti (wt pct) alloy. The microstructure and interfacial microchemistry of C/C composite/AgCuTi/Cu brazed joints were comprehensively investigated by using high-resolution transmission electron microscopy. The results indicate that the joint region of both straight and conical joints can be described as a bilayer. Reaction products of Cu3Ti3O and γ-TiO were formed near the copper side in a conical interface joint, while no reaction products were found in the straight case. The effect of Ag on the interfacial reaction was discussed, and the formation mechanism of the joints during brazing was proposed. On the basis of the detailed microstructure presented, the mechanical performance of the brazed joints was discussed in terms of reaction and morphology across the joint.

  17. Engineering and Technical Services for Joint Group on Acquisition Pollution Prevention (JG-APP) Joint Test Protocol CC-P-1-1 for Validation of Alternatives to Lead-Containing Surface Finishes, for Development of Guidelines for Conformal Coating Usage, and for Qualification of Low-VOC Conformal Coatings

    DTIC Science & Technology

    1999-06-23

    Fungus Type ATCC a No. MYCO b No. Aspergillus Niger 9642 386 Penicillium Pinophilum c 11797 391 Chaetomium Globosum 6205 459 Gliocladium... identification markings  No discoloration of printed conductors and base materials  No corrosion Joint Test Protocol 39 Major or Unique Equipment...chamber. This apparatus is similar to a terminal strip, and must be located outside the chamber. It must be able to isolate each individual

  18. Energy Materials Coordinating Committee (EMaCC)

    SciTech Connect

    Not Available

    1991-05-31

    This report summarizes EMaCC activities for fiscal year 1990 and describes the materials research programs of various offices and divisions within the department. The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the department. (JL)

  19. The cryogenic system for ITER CC superconducting conductor test facility

    NASA Astrophysics Data System (ADS)

    Peng, Jinqing; Wu, Yu; Liu, Huajun; Shi, Yi; Chen, Jinglin; Ren, Zhibin

    2011-01-01

    This paper describes the cryogenic system of the International Thermonuclear Experimental Reactor (ITER) Correction Coils (CC) test facility, which consists of a 500 W/4.5 K helium refrigerator, a 50 kA superconducting transformer cryostat (STC) and a background field magnet cryostat (BFMC). The 500 W/4.5 K helium refrigerator synchronously produces both the liquid helium (LHe) and supercritical helium (SHe). The background field magnet and the primary coil of the superconducting transformer (PCST) are cooled down by immersing into 4.2 K LHe. The secondary Cable-In-Conduit Conductor (CICC) coil of the superconducting transformer (SCST), superconducting joints and the testing sample of ITER CC are cooled down by forced-flow supercritical helium. During the commissioning experiment, all the superconducting coils were successfully translated into superconducting state. The background field magnet was fully cooled by immersing it into 4.2 K LHe and generated a maximal background magnetic field of 6.96 T; the temperature of transformer coils and current leads was reduced to 4.3 K; the inlet temperature of SHe loop was 5.6 K, which can meet the cooling requirements of CIC-Conductor and joint boxes. It is noted that a novel heat cut-off device for High Temperature Superconducting (HTS) binary current leads was introduced to reduce the heat losses of transformer cryostat.

  20. THE MASS STRUCTURE OF THE GALAXY CLUSTER Cl0024+1654 FROM A FULL LENSING ANALYSIS OF JOINT SUBARU AND ACS/NIC3 OBSERVATIONS

    SciTech Connect

    Umetsu, Keiichi; Okabe, Nobuhiro; Hsieh, Bau-Ching; Molnar, Sandor M.; Medezinski, Elinor; Broadhurst, Tom; Zitrin, Adi

    2010-05-10

    We derive an accurate mass distribution of the rich galaxy cluster Cl0024+1654 (z = 0.395) based on deep Subaru BR{sub c} z' imaging and our recent comprehensive strong-lensing analysis of Hubble Space Telescope/Advanced Camera for Surveys/NIC3 observations. We obtain the weak-lensing distortion and magnification of undiluted samples of red and blue background galaxies by carefully combining all color and positional information. Unlike previous work, the weak and strong lensing are in excellent agreement where the data overlap. The joint mass profile continuously steepens out to the virial radius with only a minor contribution {approx}10% in the mass from known subcluster at a projected distance of {approx_equal}700 kpc h {sup -1}. The cluster light profile closely resembles the mass profile, and our model-independent M/L{sub R} profile shows an overall flat behavior with a mean of (M/L{sub R} ) {approx_equal} 230h(M/L{sub R} ){sub sun}, but exhibits a mild declining trend with increasing radius at cluster outskirts, r {approx_gt} 0.6r{sub vir}. The projected mass distribution for the entire cluster is well fitted with a single Navarro-Frenk-White model with a virial mass, M{sub vir} = (1.2 {+-} 0.2) x 10{sup 15} M{sub sun} h {sup -1}, and a concentration, c{sub vir} = 9.2{sup +1.4}{sub -1.2}. This model fit is fully consistent with the depletion of the red background counts, providing independent confirmation. Careful examination and interpretation of X-ray and dynamical data, based on recent high-resolution cluster collision simulations, strongly suggest that this cluster system is in a post collision state, which we show is consistent with our well-defined mass profile for a major merger occurring along the line of sight, viewed approximately 2-3 Gyr after impact when the gravitational potential has had time to relax in the center, before the gas has recovered and before the outskirts are fully virialized. Finally, our full lensing analysis provides a model

  1. The Mass Structure of the Galaxy Cluster Cl0024+1654 from a Full Lensing Analysis of Joint Subaru and ACS/NIC3 Observations

    NASA Astrophysics Data System (ADS)

    Umetsu, Keiichi; Medezinski, Elinor; Broadhurst, Tom; Zitrin, Adi; Okabe, Nobuhiro; Hsieh, Bau-Ching; Molnar, Sandor M.

    2010-05-01

    We derive an accurate mass distribution of the rich galaxy cluster Cl0024+1654 (z = 0.395) based on deep Subaru BR c z' imaging and our recent comprehensive strong-lensing analysis of Hubble Space Telescope/Advanced Camera for Surveys/NIC3 observations. We obtain the weak-lensing distortion and magnification of undiluted samples of red and blue background galaxies by carefully combining all color and positional information. Unlike previous work, the weak and strong lensing are in excellent agreement where the data overlap. The joint mass profile continuously steepens out to the virial radius with only a minor contribution ~10% in the mass from known subcluster at a projected distance of sime700 kpc h -1. The cluster light profile closely resembles the mass profile, and our model-independent M/LR profile shows an overall flat behavior with a mean of langM/LR rang ~= 230h(M/LR )sun, but exhibits a mild declining trend with increasing radius at cluster outskirts, r >~ 0.6r vir. The projected mass distribution for the entire cluster is well fitted with a single Navarro-Frenk-White model with a virial mass, M vir = (1.2 ± 0.2) × 1015 M sun h -1, and a concentration, c vir = 9.2+1.4 -1.2. This model fit is fully consistent with the depletion of the red background counts, providing independent confirmation. Careful examination and interpretation of X-ray and dynamical data, based on recent high-resolution cluster collision simulations, strongly suggest that this cluster system is in a post collision state, which we show is consistent with our well-defined mass profile for a major merger occurring along the line of sight, viewed approximately 2-3 Gyr after impact when the gravitational potential has had time to relax in the center, before the gas has recovered and before the outskirts are fully virialized. Finally, our full lensing analysis provides a model-independent constraint of M 2D(

  2. Joint swelling

    MedlinePlus

    Swelling of a joint ... Joint swelling may occur along with joint pain . The swelling may cause the joint to appear larger or abnormally shaped. Joint swelling can cause pain or stiffness. After an ...

  3. Anomalous absorption in c-C_3H and c-C_3D radicals

    NASA Astrophysics Data System (ADS)

    Chandra, S.; Shinde, S. V.; Kegel, W. H.; Sedlmayr, E.

    Yamamoto et al. (1987) reported the first detection of the c-C_3H radical in TMC-1 through its transition 2_1 2 rightarrow 1_1 1 at 91.5 GHz. The column density of c-C_3H in TMC-1 was estimated to be 6 times 10^12 cm^-2, which is about one order of magnitude lower than that of the c-C_3H_2 which is ubiquitous in galactic objects. Mangum & Wootten (1990) detected c-C_3H through the transition 1_1 0 rightarrow 1_1 1 at 14.8 GHz in 12 additional galactic objects. The most probable production mechanism of both the c-C_3H and c-C_3H_2 in dark clouds is a common dissociation reaction of the C_3H_3^+ ion (Adams & Smith 1987). Although the c-C_3H is 0.8 eV less stable than its isomer l-C_3H, finding of comparable column densities of both the isomers in TMC-1 suggests that the formation rate for both, c-C_3H and l-C_3H, are of about the same order in the cosmic objects. The existence of a metastable isomer under interstellar conditions is a well known phenomenon in astronomy. The aim of this investigation is a quantitative estimate of relative line intensities under NLTE conditions. For wide ranges of physical parameters, where these molecules may be found, we have solved a set of statistical equilibrium equations coupled with the equations of radiative transfer in an on-the-spot approximation. For c-C_3H, we accounted for 51 energy levels connected by 207 radiative transitions and for c-C_3D, we accounted for 51 energy levels connected by 205 radiative transitions. Our results show that the 3_3 1 rightarrow 3_3 0 transition of c-C_3H and c-C_3D may be found in absorption against the cosmic microwave background (CMB). Furthermore, we found population inversion for the 1_1 0 rightarrow 1_1 1 transition. These findings may be useful in identifying these molecules in other cosmic objects, as well as for the determination of physical parameters in these objects.

  4. Benchmarks for electronically excited states: CASPT2, CC2, CCSD, and CC3

    NASA Astrophysics Data System (ADS)

    Schreiber, Marko; Silva-Junior, Mario R.; Sauer, Stephan P. A.; Thiel, Walter

    2008-04-01

    A benchmark set of 28 medium-sized organic molecules is assembled that covers the most important classes of chromophores including polyenes and other unsaturated aliphatic compounds, aromatic hydrocarbons, heterocycles, carbonyl compounds, and nucleobases. Vertical excitation energies and one-electron properties are computed for the valence excited states of these molecules using both multiconfigurational second-order perturbation theory, CASPT2, and a hierarchy of coupled cluster methods, CC2, CCSD, and CC3. The calculations are done at identical geometries (MP2/6-31G*) and with the same basis set (TZVP). In most cases, the CC3 results are very close to the CASPT2 results, whereas there are larger deviations with CC2 and CCSD, especially in singlet excited states that are not dominated by single excitations. Statistical evaluations of the calculated vertical excitation energies for 223 states are presented and discussed in order to assess the relative merits of the applied methods. CC2 reproduces the CC3 reference data for the singlets better than CCSD. On the basis of the current computational results and an extensive survey of the literature, we propose best estimates for the energies of 104 singlet and 63 triplet excited states.

  5. Modelling ac ripple currents in HTS coated conductors

    NASA Astrophysics Data System (ADS)

    Xu, Zhihan; Grilli, Francesco

    2015-10-01

    Dc transmission using high temperature superconducting (HTS) coated conductors (CCs) offers a promising solution to the globally growing demand for effective, reliable and economic transmission of green energy up to the gigawatt level over very long distances. The credible estimation of the losses and thereby the heat dissipation involved, where ac ripples (introduced in rectification/ac-dc conversion) are viewed as a potential source of notable contribution, is highly essential for the rational design of practical HTS dc transmission cables and corresponding cryogenic systems to fulfil this demand. Here we report a targeted modelling study into the ac losses in a HTS CC subject to dc and ac ripple currents simultaneously, by solving Maxwell’s equations using the finite element method (FEM) in the commercial software package COMSOL. It is observed that the instantaneous loss exhibits only one peak per cycle in the HTS CC subject to sinusoidal ripples, given that the amplitude of the ac ripples is smaller than approximately 20% of that of the dc current. This is a distinct contrast to the usual observation of two peaks per cycle in a HTS CC subject to ac currents only. The unique mechanism is also revealed, which is directly associated with the finding that, around any local minima of the applied ac ripples, the critical state of -J c is never reached at the edges of the HTS CC, as it should be according to the Bean model. When running further into the longer term, it is discovered that the ac ripple loss of the HTS CC in full-wave rectification decays monotonically, at a speed which is found to be insensitive to the frequency of the applied ripples within our targeted situations, to a relatively low level of approximately 1.38 × 10-4 W m-1 in around 1.7 s. Comparison between this level and other typical loss contributions in a HTS dc cable implies that ac ripple currents in HTS CCs should only be considered as a minor source of dissipation in superconducting dc

  6. ASW and Support-Ship Corrosion-Control (CC) Program Pilot SIMA CC Shop.

    DTIC Science & Technology

    1984-09-14

    CONCLUSIONS/ACTIONS: 1. Establish "Small" Corrosion-Control (CC) Shop and deliver 14 of the 15 * CC systems using the Flame Spray, Incorporated (FSI) Model ...Alternative 2, PSI Model 5005, has been selected for implementation for a one-year service test. (Section 10.2) UTILITIES Elec: 440 vat. 3 0 .• 60 H...4 IN-PROCESS REVIEW OF 27 APRIL 1984 (Subtask 1-3) 4-1 4.1 General 4-1 4.2 Formal Comments, Discussion & Recommendations 4-1 * 4.3 Informal Comment 4

  7. An Overview of CC Coherent Pion Production

    NASA Astrophysics Data System (ADS)

    Williams, Zachary

    2017-01-01

    Neutrino cross-sections are a critical component to any neutrino measurement. With the modern neutrino experiments aiming to measure precision parameters, such as those in long-baseline oscillation experiments, the need for a detailed understanding of neutrino interactions has become even more important. Within this landscape remains a number of experimental challenges in the regime of low energy neutrino cross-sections. This talk will give an overview of recent publications on Charged Current-Coherent Pion Production (CC-Coh Pion) results from a number of experimental collaborations. Specifically, the lack of observation from the SciBooNE and T2K collaborations to observe CC-Coh Pion below one GeV in contrast to the observation of this signature at higher energies by other experiments. The work presented here is a part of the beginning steps to a reanalysis of the SciBooNE data using a modern neutrino generator in order to better understand the previous results. There will be included details of a liquid Argon purification system that is being built at UTA, and of plans for a ``Baby Time Projection Chamber (TPC)'' which will also be built at UTA, and the instrumentation and detector methods used in their construction. The closing is a look to the future for a new analysis at low neutrino energies utilizing Liquid Argon Time Projection Chambers (LArTPCs) based at Fermilab.

  8. D0 Cryo CC Heater Installation

    SciTech Connect

    Urbin, J.; /Fermilab

    1991-03-16

    Nine pairs of heaters are installed in the bottom of the CC pressure vessel.The physical layout is shown in the CC internal development drawing, D0 dwg. 3740.510-ME-255523. Electrically the heater system is a delta configuration. Electrical details are found on D0 dwg. 3740.515EC-273761. The feedthrough connectors for power to the heaters are located in the instrumentation box. Connector positions are found on D0 dwg.3740.515-EC-273760. Original sketches for the above named drawings are included in this document. The heaters and wiring were cleaned various times prior to and after installation with ethyl a1chohol. At various stages in the installation hi-pot and continuity tests were successfully accomplished to verify the integrity of the system. The fmal hi-pot numbers are included in the documentation. The heaters and wiring are kept separated from thermometry and purity cell wiring by SS sheetmetal barriers. The fabrication, testing and installation was completed by M. Hentges and his crew from AD/Cryo.

  9. Replacement of Neisseria meningitidis C cc11/ET-15 variant by a cc103 hypervirulent clone, Brazil 2005-2011.

    PubMed

    Sardinha, Guilherme; Cordeiro, Soraia; Gomes, Erica; Romanelli, Cinthia; Andrade, Claudia; Reis, Joice; de Filippis, Ivano

    2013-08-01

    Outbreaks caused by serogroup C meningococci in the northeast region of Brazil from 2005 to 2011 were associated to the emergence of variant ET-15 of cc11, which has been replaced by cc103 from 2006 to date. The increase of cc103 should be closely monitored to prevent the spread of this clone to neighbouring regions.

  10. Acromioclavicular and sternoclavicular joint injuries.

    PubMed

    Macdonald, Peter B; Lapointe, Pierre

    2008-10-01

    Acromioclavicular (AC) joint injuries are a frequent diagnosis following an acute shoulder injury. The literature on AC joint dislocation is extensive, reflecting the intense debate surrounding the topic. The choice of treatment is influenced by factors including the type of injury, the patient's occupation, the patient's past medical history, the acuity of the injury, and patient expectations. Sternoclavicular (SC) joint dislocation is an uncommon injury. The treatment of acute anterior SC joint dislocations is controversial. It is difficult to study with a well-designed prospective study because of the low frequency of this injury. Posterior dislocations are much less common than anterior dislocations. Posterior dislocations, however, are more serious; they are associated with significant complications and require prompt attention.

  11. cc domains with intrinsic screening and absence of closure domains in atomically ordered BaTiO3 in UHV

    NASA Astrophysics Data System (ADS)

    Watanabe, Y.; Kaku, S.; Nakamura, K.

    2010-03-01

    cc domains have been observed in ordinary environments, where extraneous screening hampers rigorous comparison with theories. Indeed, recent theories predict closure domains in the absence of extraneous screening. Therefore, we performed simultaneous topographic, electrostatic and piezoelectric imaging of atomically clean, free surface of BaTiO3 single crystal by AFM operated in ultra high vacuum (UHV).footnotetextS. Kaku et al., J.Kor.Phys.Soc.55,799(2009) BaTiO3 surface retains stoichiometry in UHV because of the absence of volatile elements (Pb, Bi, Li) and low TC The surface cleanness is confirmed by the detection of chemical bonding. Three imaging methods verified the assignment of ac and cc domains, which is consistent with conventional theory and experiments. These ac and cc domains change reversibly by weak electric field of 2kV/cm at RT. In addition, the temperature dependence of the domains agrees with convention theories. These observations prove the absence of dominating control of defects and impurities on the observed domains. The sole deviation is the reduction of the potential difference to 1/30 of the conventional theories. The described intrinsic nature of the domains indicates an intrinsic screening in cc domains, which is consistent with the intrinsic surface carrier layer on ferroelectrics.footnotetextWatanabe et al. PRL86332(2001), PRB57,789(1998)

  12. Anomalous absorption in c-C3H and c-C3D radicals

    NASA Astrophysics Data System (ADS)

    Chandra, S.; Shinde, S. V.; Kegel, W. H.; Sedlmayr, E.

    2007-05-01

    Context: The c-C3H radical was first detected in TMC-1 by Yamamoto et al. (1987, ApJ, 322, L55), who observed the 2{12} → 1{11} transition at 91.5 GHz in emission. Mangum & Wootten (1990, A&A, 239, 319) observed the 1{10} → 1{11} transition at 14.8 GHz in emission in 12 additional galactic objects. Aims: The aim of this investigation is a quantitative estimate of relative line intensities under NLTE conditions. Methods: For wide ranges of physical parameters, where these molecules may be found, we have solved a set of statistical equilibrium equations coupled with the equations of radiative transfer in an on-the-spot approximation. For c-C3H, we accounted for 51 energy levels connected by 207 radiative transitions, and for c-C3D, we accounted for 51 energy levels connected by 205 radiative transitions. Results: Our results show that the 3{31} → 3{30} transition of c-C3H and c-C3D may be found in absorption against the cosmic microwave background (CMB). Furthermore, we found population inversion for the 1{10} → 1{11} transition. These findings may be useful in identifying these molecules in other cosmic objects, as well as for the determination of physical parameters in these objects. Tables 1-3 and Figs. 4, 5 are only available in electronic form at http://www.aanda.org

  13. First North American 50 cc Total Artificial Heart Experience: Conversion from a 70 cc Total Artificial Heart.

    PubMed

    Khalpey, Zain; Kazui, Toshinobu; Ferng, Alice S; Connell, Alana; Tran, Phat L; Meyer, Mark; Rawashdeh, Badi; Smith, Richard G; Sweitzer, Nancy K; Friedman, Mark; Lick, Scott; Slepian, Marvin J; Copeland, Jack G

    2016-01-01

    The 70 cc total artificial heart (TAH) has been utilized as bridge to transplant (BTT) for biventricular failure. However, the utilization of 70 cc TAH has been limited to large patients for the low output from the pulmonary as well as systemic vein compression after chest closure. Therefore, the 50 cc TAH was developed by SynCardia (Tucson, AZ) to accommodate smaller chest cavity. We report the first TAH exchange from a 70 to 50 cc due to a fit difficulty. The patient failed to be closed with a 70 cc TAH, although the patient met the conventional 70 cc TAH fit criteria. We successfully closed the chest with a 50 cc TAH.

  14. Roebel assembled coated conductor cables (RACC): Ac-Losses and current carrying potential

    NASA Astrophysics Data System (ADS)

    Frank, A.; Heller, R.; Goldacker, W.; Kling, A.; Schmidt, C.

    2008-02-01

    Low ac-loss HTS cables for transport currents well above 1 kA are required for application in transformers and generators and are taken into consideration for future generations of fusion reactor coils. Coated conductors (CC) are suitable candidates for high field application at an operation temperature in the range 50-77 K. Ac-field applications require cables with low ac-losses and hence twisting of the individual strands. We solved this problem using the Roebel technique. Short lengths of Roebel bar cables were prepared from industrial DyBCO and YBCO-CC. Meander shaped tapes of 4 or 5 mm width with twist pitches of 123 or 127 mm were cut from the 10 or 12 mm wide CC tapes using a specially designed tool. Eleven or twelve of these strands were assembled to a cable. The electrical and mechanical connection of the tapes was achieved using a silver powder filled conductive epoxy resin. Ac-losses of a short sample in an external ac-field were measured as a function of frequency and field amplitude as well as the coupling current decay time constant. We discuss the results in terms of available theories and compare measured time constants in transverse field with measured coupling losses. Finally the potential of this cable type for ac-use is discussed with respect to ac-losses and current carrying capability.

  15. Antinociceptive activity of CC44, a biotinylated improgan congener

    PubMed Central

    Hoerbelt, Paul; Nalwalk, Julia W.; Phillips, James G.; Wentland, Mark P.; Shan, Zhixing; Hough, Lindsay B.

    2013-01-01

    Improgan, a non-opioid, antinociceptive drug, activates descending analgesic circuits following brain administration, but the improgan receptor remains unidentified. Since biotinylation of drugs can enhance drug potency or facilitate discovery of new drug targets, a biotinylated congener of improgan (CC44) and several related compounds were synthesized and tested for antinociceptive activity. In rats and mice, intracerebroventricular (i.c.v.) administration of CC44 produced dose-dependent reductions in thermal nociceptive (tail flick and hot plate) responses, with 5-fold greater potency than improgan. CC44 also robustly attenuated mechanical (tail pinch) nociception in normal rats and mechanical allodynia in a spinal nerve ligation model of neuropathic pain. Similar to the effects of improgan, CC44 antinociception was reversed by the GABAA agonist muscimol (consistent with activation of analgesic circuits), and was resistant to the opioid antagonist naltrexone (implying a non-opioid mechanism). Also like improgan, CC44 produced thermal antinociception when microinjected into the rostral ventromedial medulla (RVM). Unlike improgan, CC44 (i.c.v.) produced antinociception which was resistant to antagonism by the cannabinoid CB1 antagonist/inverse agonist rimonabant. CC44 was inactive in mice following systemic administration, indicating that CC44 does not penetrate the brain. Preliminary findings with other CC44 congeners suggest that the heteroaromatic nucleus (imidazole), but not the biotin moiety, is required for CC44’s antinociceptive activity. These findings demonstrate that CC44 is a potent analgesic compound with many improgan-like characteristics. Since powerful techniques are available to characterize and identify the binding partners for biotin-containing ligands, CC44 may be useful in searching for new receptors for analgesic drugs. PMID:23834775

  16. ACS: ALMA Common Software

    NASA Astrophysics Data System (ADS)

    Chiozzi, Gianluca; Šekoranja, Matej

    2013-02-01

    ALMA Common Software (ACS) provides a software infrastructure common to all ALMA partners and consists of a documented collection of common patterns and components which implement those patterns. The heart of ACS is based on a distributed Component-Container model, with ACS Components implemented as CORBA objects in any of the supported programming languages. ACS provides common CORBA-based services such as logging, error and alarm management, configuration database and lifecycle management. Although designed for ALMA, ACS can and is being used in other control systems and distributed software projects, since it implements proven design patterns using state of the art, reliable technology. It also allows, through the use of well-known standard constructs and components, that other team members whom are not authors of ACS easily understand the architecture of software modules, making maintenance affordable even on a very large project.

  17. Autyomatic Differentiation of C/C++

    SciTech Connect

    Beata Winnicka, Boyana Norris

    2005-11-14

    Automatic differentiation (AD) tools mechanize the process of developing code for the computation of derivatives. AD avoids the inaccuracies inherent in numerical approximations. Furthermore, sophisticated AD algoirthms can often produce c ode that is more reliable and more efficient than code written by an expert programmer. ADIC is the first and only AD tool for C and C++ based on compiler technology. This compiler foundation makes possible analyses and optimizations not available in toos based on operator overloading. The earliest implementations of ADIC included support for ANSI C applications, ADIC 2.0 lverages EDG, a commercial C/C++ parser, to provide robust C++ differentiation support. Modern AD tools, including ADIC are implemented in a modular way, aiming to isolate language-dependent program analyses and semantic transformations. The component design leads to much higher implementation quality because the different components can be implemented by experts in each of the different domains involved. For example, a compiler expert can focus on parsing, canonicalizing, and unparising C and C++, while an expert in graph theory and algorithms can produce new differentiation modules without having to worry about the complexity of parsing and generating C++ code. Thsi separation of concerns was achieved through the use of language-independent program analysis interfaces (in collaboration with researcgers at Rice University) and a language-independent XML representation of the computational portions of programs (XAIF). In addition to improved robustness and faster development times, this design naturally enables the reuse of program analysis algorithms and differentiation modules in compiler-based AD tools for other languages. In fact, the analysis and differention components are used in both ADIC and the Open AD Fortran front-end (based on Rice's Open64 compiler.

  18. 75 FR 64727 - Joint and Several Liability Reallocation Agreement

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-20

    ... RIN 3052-AC64 Joint and Several Liability Reallocation Agreement AGENCY: Farm Credit Administration. ACTION: Notice of approval of the draft joint and several liability reallocation agreement. SUMMARY: The Farm Credit Administration (FCA or we) is announcing that it has given approval of a Joint and...

  19. 40 CFR Appendix to Subpart Cc of... - Tables

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 11 2013-07-01 2013-07-01 false Tables Appendix to Subpart CC of Part... to Subpart CC of Part 63—Tables Table 1—Hazardous Air Pollutants Chemical name CAS No.a Benzene 71432... salts, esters, or derivatives. Table 2—Leak Definitions for Pumps and Valves Standard a Phase...

  20. 40 CFR Appendix to Subpart Cc of... - Tables

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Tables Appendix to Subpart CC of Part... to Subpart CC of Part 63—Tables Link to an amendment published at 75 FR 37731, June 30, 2010. Link to an amendment published at 75 FR 37731, June 30, 2010. Table 1—Hazardous Air Pollutants Chemical...

  1. Roof Plans: Section "CC", Roof Plan; Roof Framing Plans: Section ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Roof Plans: Section "C-C", Roof Plan; Roof Framing Plans: Section "C-C", Section "D-D"; Roof Framing Sections: Cross Section "G-G", Cross Section "H-H" - Fort Washington, Fort Washington Light, Northeast side of Potomac River at Fort Washington Park, Fort Washington, Prince George's County, MD

  2. Understanding Rotation about a C=C Double Bond

    ERIC Educational Resources Information Center

    Barrows, Susan E.; Eberlein, Thomas H.

    2005-01-01

    The study focuses on the process and energetic cost of twisting around a C=C double bond and provides instructors with a simple vehicle for rectifying the common misrepresentation of C=C double bonds as rigid and inflexible. Discussions of cis and trans isomers of cycloalkenes are a good entry point for introducing students to the idea of a…

  3. Exchange of the H(CC) domain mediating double receptor recognition improves the pharmacodynamic properties of botulinum neurotoxin.

    PubMed

    Rummel, Andreas; Mahrhold, Stefan; Bigalke, Hans; Binz, Thomas

    2011-12-01

    The four-domain structure of botulinum neurotoxins (BoNTs) reflects their multistep intoxication process. The high toxicity of BoNTs primarily results from specific binding and uptake into neurons mediated by their 50-kDa cell-binding fragment (H(C) ). X-ray crystallography data have revealed that the H(C) fragment consists of two domains of equal size, named the 25-kDa N-terminal half of H(C) (H(CN) ) and the 25-kDa C-terminal half of H(C) (H(CC) ). In recent years, the ganglioside-binding sites of all seven BoNT serotypes have been allocated to the H(CC) domain. For BoNT/A, BoNT/B and BoNT/G, the protein receptor-binding site has been also been localized to the H(CC) domain. Here, we demonstrate that the H(CC) serotype can modulate the affinity of the H(C) fragment for neuronal membranes as well as the potency of full-length BoNT by replacing the BoNT/A H(CC) domain with the BoNT/B H(CC) , BoNT/C H(CC) and BoNT/E H(CC) domains, which exhibit higher affinity for synaptosomes. Indeed, the hybrids H(C) AB and H(C) AC display a higher affinity than wild-type H(C) A. Furthermore, the potency of a BoNT/A-based full-length hybrid containing the H(CC) B domain (AAAB; letters represent the serotype origin of the four domains) was quadrupled as compared with wild-type BoNT/A. Analogously, exchange of the H(C) fragment (AABB) yielded a neurotoxin with four-fold higher potency. As BoNT/A and BoNT/B are extensively used to treat neurological disorders, thereby facing the problem of BoNT neutralizing antibody formation, a BoNT with increased potency would lower the repeatedly administered protein dosage while maintaining the clinical benefit. Such a lowered protein load will delay the onset of neurotoxin antibody formation in patients.

  4. Experiment of low resistance joints for the ITER correction coil.

    PubMed

    Liu, Huajun; Wu, Yu; Wu, Weiyue; Liu, Bo; Shi, Yi; Guo, Shuai

    2013-01-01

    A test method was designed and performed to measure joint resistance of the ITER correction coil (CC) in liquid helium (LHe) temperature. A 10 kA superconducting transformer was manufactured to provide the joints current. The transformer consisted of two concentric layer-wound superconducting solenoids. NbTi superconducting wire was wound in the primary coil and the ITER CC conductor was wound in the secondary coil. The primary and the secondary coils were both immersed in liquid helium of a 300 mm useful bore diameter cryostat. Two ITER CC joints were assembled in the secondary loop and tested. The current of the secondary loop was ramped to 9 kA in several steps. The two joint resistances were measured to be 1.2 nΩ and 1.65 nΩ, respectively.

  5. Bonding and Integration of C-C Composite to Cu-Clad-Molybdenum for Thermal Management Applications

    NASA Technical Reports Server (NTRS)

    Asthana, R.; Singh, M.; Shpargel, T.P.

    2008-01-01

    Two- and three-dimensional carbon-carbon composites with either resin-derived matrix or CVI matrix were joined to Cu-clad-Mo using active Ag-Cu braze alloys for thermal management applications. The joint microstructure and composition were examined using Field-Emission Scanning Electron Microscopy and Energy-Dispersive Spectroscopy, and the joint hardness was characterized using the Knoop microhardness testing. Observations on the infiltration of the composite with molten braze, dissolution of metal substrate, and solute segregation at the C-C surface have been discussed. The thermal response of the integrated assembly is also briefly discussed.

  6. Energy Materials Coordinating Committee (EMaCC), Fiscal year 1990

    SciTech Connect

    None, None

    1991-05-31

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. Four topical subcommittees are established and are continuing their own programs: Structural Ceramics, Electrochemical Technologies, Radioactive Waste Containment, and Superconductivity. In addition, the EMaCC aids in obtaining materialsrelated inputs for both intra- and inter-agency compilations. Membership in the EMaCC is open to any Department organizational unit; participants are appointed by Division or Office Directors. The current active membership is listed on the following four pages. The EMaCC reports to the Director of the Office of Energy Research in his capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1990 and describes the materials research programs of various offices and divisions within the Department. The Chairman of EMaCC for FY 1990 was Scott L. Richlen; the Executive Secretary was Dr. Jerry Smith.

  7. Chlorodifluoroacetyl isocyanate, ClF2CC(O)NCO: preparation and structural and spectroscopic studies.

    PubMed

    Ramos, Luis A; Ulic, Sonia E; Romano, Rosana M; Vishnevskiy, Yury V; Berger, Raphael J F; Mitzel, Norbert W; Beckers, Helmut; Willner, Helge; Tong, Shengrui; Ge, Maofa; Della Védova, Carlos O

    2012-11-29

    Chlorodifluoroacetyl isocyanate, ClF2CC(O)NCO, was prepared by the reaction of ClF2CC(O)Cl with excess of AgNCO. The colorless compound melts at −83 °C and the vapor pressure follows the equation ln p = −3868.3 (1/T) + 10.89 (p [Atm], T [K]) in the range −38 to +22 °C, extrapolated bp ca. 82 °C. It has been characterized by IR (gas phase, Ar matrix), liquid Raman, 19F and 13C NMR, gas UV–vis spectrum, photoelectron spectroscopy (PES), photoionization mass spectrometry (PIMS), and gas electron diffraction (GED). The matrix photochemistry has been studied and the conformational properties of ClF2CC(O)NCO have been analyzed by joint application of vibrational spectroscopy, GED, and quantum chemical calculations. Two conformers were detected in gaseous and liquid phases, in which the C–Cl bond adopts a gauche orientation with respect to the C═O group, whereas this group can be in syn or anti orientation with respect to the N═C bond of the NCO group. An enthalpy difference ΔH(exp)° = 1.3 ± 0.2 kcal mol(–1) between the most stable syn–gauche and the less stable anti-gauche form was derived using the van’t Hoff equation, which is in reasonable agreement with the computed difference of ΔH° = 0.8 kcal mol(–1) (B3LYP/6-311+G(3df) approximation). The most significant gas phase structural parameters for gauche–syn ClF2CC(O)NCO are r(e)(NC═O) = 1.157(1) Å, r(e)(N═CO) = 1.218(1) Å, r(e)(N–C) = 1.378(9) Å, r(e)(C═O) = 1.195(1) Å, angle(e)(CNC) = 128.6(19)°. Photolysis of ClF2CC(O)NCO using an ArF excimer laser (193 nm) mainly yield ClF2CNCO along with some ClF2CC(O)N nitrene. The valence electronic properties of the title compound were studied using the PES and PIMS. The experimental first vertical ionization energy of 11.54 eV corresponds to the ejection of a carbonylic oxygen lone pair electron.

  8. Microfabricated AC impedance sensor

    DOEpatents

    Krulevitch, Peter; Ackler, Harold D.; Becker, Frederick; Boser, Bernhard E.; Eldredge, Adam B.; Fuller, Christopher K.; Gascoyne, Peter R. C.; Hamilton, Julie K.; Swierkowski, Stefan P.; Wang, Xiao-Bo

    2002-01-01

    A microfabricated instrument for detecting and identifying cells and other particles based on alternating current (AC) impedance measurements. The microfabricated AC impedance sensor includes two critical elements: 1) a microfluidic chip, preferably of glass substrates, having at least one microchannel therein and with electrodes patterned on both substrates, and 2) electrical circuits that connect to the electrodes on the microfluidic chip and detect signals associated with particles traveling down the microchannels. These circuits enable multiple AC impedance measurements of individual particles at high throughput rates with sufficient resolution to identify different particle and cell types as appropriate for environmental detection and clinical diagnostic applications.

  9. Joint pain

    MedlinePlus

    ... that may be done include: CBC or blood differential C-reactive protein Joint x-ray Sedimentation rate ... chap 256. Schaible H-G. Joint pain: basic mechanisms. In: McMahon SB, Koltzenburg M, Tracey I, Turk ...

  10. Joint Interdiction

    DTIC Science & Technology

    2016-09-09

    Purpose This publication has been prepared under the direction of the Chairman of the Joint Chiefs of Staff. It sets forth joint doctrine to govern the...governmental and nongovernmental organizations, multinational forces, and other interorganizational partners. It provides military guidance for the...exercise of authority by combatant commanders and other joint force commanders (JFCs), and prescribes joint doctrine for operations and training. It

  11. Joint Disorders

    MedlinePlus

    A joint is where two or more bones come together, like the knee, hip, elbow, or shoulder. Joints can be damaged by many types of injuries or diseases, including Arthritis - inflammation of a joint. It causes pain, stiffness, and swelling. Over time, ...

  12. AC magnetohydrodynamic microfluidic switch

    SciTech Connect

    Lemoff, A V; Lee, A P

    2000-03-02

    A microfluidic switch has been demonstrated using an AC Magnetohydrodynamic (MHD) pumping mechanism in which the Lorentz force is used to pump an electrolytic solution. By integrating two AC MHD pumps into different arms of a Y-shaped fluidic circuit, flow can be switched between the two arms. This type of switch can be used to produce complex fluidic routing, which may have multiple applications in {micro}TAS.

  13. Understanding Rotation about a C=C Double Bond

    NASA Astrophysics Data System (ADS)

    Barrows, Susan E.; Eberlein, Thomas H.

    2005-09-01

    In this article, twisting about the C=C double bond and the consequential pyramidalization of sp 2 carbon atoms in alkenes were examined in a molecular modeling study using trans -2-butene as a model system. According to our trans -2-butene model and other similar work, most of the strength of a π bond is retained upon twisting, even for remarkably large C C=C C dihedral angles (up to 90°). The phenomenon of sp 2 carbon atom pyramidalization and preservation of π bond strength upon twisting a C=C double bond is well established in the literature, but is rarely discussed in introductory textbooks. This absence is noteworthy because profound manifestations of this effect do occur in compounds that are covered in an introductory organic chemistry curriculum. We present a simple method of introducing the concept of a flexible C=C π bond into beginning organic chemistry courses. We report the energetic demands of partial twisting about the C=C bond in 2-butene as calculated using DFT, LMP2, and MCSCF methods. Finally, using the results of these calculations, we assessed the degree of strain introduced by the twisted nature of the C=C bond in trans cycloalkenes.

  14. AC Losses of Prototype HTS Transmission Cables

    SciTech Connect

    Demko, J.A.; Dresner, L.; Hughey, R.L.; Lue, J.W.; Olsen, S.K.; Sinha, U.; Tolbert, J.C.

    1998-09-13

    Since 1995 Southwire Company and Oak Ridge National Laboratory (ORNL) have jointly designed, built, and tested nine, l-m long, high temperature superconducting (HTS) transmission cable prototypes. This paper summarizes the AC loss measurements of five of the cables not reported elsewhere, and compares the losses with each other and with theory developed by Dresner. Losses were measured with both a calorimetric and an electrical technique. Because of the broad resistive transition of the HTS tapes, the cables can be operated stably beyond their critical currents. The AC losses were measured in this region as well as below critical currents. Dresner's theory takes into account the broad resistive transition of the HTS tapes and calculates the AC losses both below and above the critical current. The two sets of AC 10SS data agree with each other and with the theory quite welL In particular, at low currents of incomplete penetration, the loss data agree with the theoretical prediction of hysteresis loss based on only the outer two Iayers carrying the total current.

  15. The 3'UTR 1188A/C polymorphism of IL-12p40 is not associated with susceptibility for developing plaque psoriasis in Mestizo population from western Mexico.

    PubMed

    Sandoval-Talamantes, Ana Karen; Brito-Luna, Myrian Johanna; Fafutis-Morris, Mary; Villanueva-Quintero, Delfina Guadalupe; Graciano-Machuca, Omar; Ramírez-Dueñas, María Guadalupe; Alvarado-Navarro, Anabell

    2015-02-01

    Psoriasis is a chronic autoimmune inflammatory disease that affects the skin and the joints. Psoriasis is characterized by the keratinocyte proliferation, which is induced by cytokines Th1 and Th17. Patients with plaque psoriasis present a chronic inflammatory response with high levels of interleukin (IL)-12 and IL-23. Various single-nucleotide polymorphisms (SNP) have been identified in the IL12B gene, such as SNP 3' UTR 1188 A/C (SNP rs3212227), which has been associated with susceptibility to developing plaque psoriasis and with the production of IL-12 and IL-23 in individuals of different ethnic groups. In this study, we determined whether there is an association of SNP rs3212227 with the susceptibility of developing plaque psoriasis and with serum levels of IL-12 and IL-23 in Mestizo population in western Mexico. We included 112 patients with psoriasis and 112 clinical healthy individuals in the study. The frequencies of genotypes A/A, A/C, and C/C in patients with plaque psoriasis were 41, 53, and 6%, respectively, while in the control group, these were 37, 53, and 10%, respectively, without finding statistically significant differences between both groups (p>0.05). Although IL-12 and IL-23 serum levels were higher in patients than in controls, we found no significant differences. The group of patients with genotype CC presented the highest levels of IL-23 (p<0.05). These data suggest that the SNP rs3212227 phenotype is not associated with the risk of developing plaque psoriasis or with IL-12 and IL-23 levels in Mestizo population in western Mexico.

  16. Synthesis, conjugation, and radiolabeling of a novel bifunctional chelating agent for (225)Ac radioimmunotherapy applications.

    PubMed

    Chappell, L L; Deal, K A; Dadachova, E; Brechbiel, M W

    2000-01-01

    225Ac (t(1/2) = 10 days) is an alternative alpha-emitter that has been proposed for radioimmunotherapy (RIT) due to its many favorable properties, such as half-life and mode of decay. The factor limiting use of (225)Ac in RIT is the lack of an acceptably stable chelate for in vivo applications. Herein is described the first reported bifunctional chelate for (225)Ac that has been evaluated for stability for in vivo applications. The detailed synthesis of a bifunctional chelating agent 2-(4-isothiocyanatobenzyl)-1,4,7,10,13, 16-hexaazacyclohexadecane- 1,4,7,10,13,16-hexaacetic acid (HEHA-NCS) is reported. This ligand was conjugated to three monoclonal antibodies, CC49, T101, and BL-3 with chelate-to-protein ratios between 1.4 and 2. The three conjugates were radiolabeled with (225)Ac, and serum stability study of the [(225)Ac]BL-3-HEHA conjugate was performed.

  17. Tevatron AC dipole system

    SciTech Connect

    Miyamoto, R.; Kopp, S.E.; Jansson, A.; Syphers, M.J.; /Fermilab

    2007-06-01

    The AC dipole is an oscillating dipole magnet which can induce large amplitude oscillations without the emittance growth and decoherence. These properties make it a good tool to measure optics of a hadron synchrotron. The vertical AC dipole for the Tevatron is powered by an inexpensive high power audio amplifier since its operating frequency is approximately 20 kHz. The magnet is incorporated into a parallel resonant system to maximize the current. The use of a vertical pinger magnet which has been installed in the Tevatron made the cost relatively inexpensive. Recently, the initial system was upgraded with a more powerful amplifier and oscillation amplitudes up to 2-3{sigma} were achieved with the 980 GeV proton beam. This paper discusses details of the Tevatron AC dipole system and also shows its test results.

  18. ACS CCDs daily monitor

    NASA Astrophysics Data System (ADS)

    Sirianni, Marco

    2006-07-01

    This program consists of a set of basic tests to monitor, the read noise, thedevelopment of hot pixels and test for any source of noise in ACS CCDdetectors. The files, biases and dark will be used to create referencefiles for science calibration. This programme will be for the entire lifetime of ACS.For cycle 15 the program will cover 18 months 12.1.06->05.31.08and it has been divied into three different proposal each covering six months.The three poroposal are 11041-11042-11043.

  19. ac bidirectional motor controller

    NASA Technical Reports Server (NTRS)

    Schreiner, K.

    1988-01-01

    Test data are presented and the design of a high-efficiency motor/generator controller at NASA-Lewis for use with the Space Station power system testbed is described. The bidirectional motor driver is a 20 kHz to variable frequency three-phase ac converter that operates from the high-frequency ac bus being designed for the Space Station. A zero-voltage-switching pulse-density-modulation technique is used in the converter to shape the low-frequency output waveform.

  20. Internal friction and gas desorption of {C}/{C} composites

    NASA Astrophysics Data System (ADS)

    Serizawa, H.; Sato, S.; Kohyama, A.

    1994-09-01

    {C}/{C} composites are the most promising candidates as high heat flux component materials, where temperature dependence of mechanical properties and gas desorption behavior at elevated temperature are important properties. At the beginning, the newly developed internal friction measurement apparatus, which enables the accurate measurement of dynamic elastic properties up to 1373 K along with the measurement of gas desorption behavior, was used. The materials studied were unidirectional (UD) {C}/{C} composites reinforced with mesophase pitch-based carbon fibers, which were heat treated at temperatures ranging from 1473 to 2773 K which produced a variety of graphitized microstructures. Two-dimensional (2D) {C}/{C} composites reinfored with flat woven fabrics of PAN type carbon fibers were also studied. These materials were heat treated at 1873 K. From the temperature spectrum of internal friction of 2D {C}/{C} composites, these internal friction peaks were detected and were related to gas desorption. Also the temperature dependence of Young's modulus of UD {C}/{C} composites, negative and positive dependence of Young's modulus were observed reflecting microstructure changes resulting from the heat treatments.

  1. Comparison of hepatocellular carcinoma (HCC), cholangiocarcinoma (CC), and combined HCC-CC (CHC) with each other based on microarray dataset.

    PubMed

    Wang, Lishan; Zang, Weidong; Xie, Dongli; Ji, Weidong; Pan, Yaosheng; Li, Zhiqiang; Shen, Jiawei; Shi, Yongyong

    2013-06-01

    Liver carcinomas have been classified into three types: hepatocellular carcinoma (HCC), cholangiocarcinoma (CC), and combined HCC-CC (CHC). We aim to find the common and different characteristic of these three types of liver cancer. The gene expression profiling of HCC, CC, and CHC were compared with each other, and enrichment pathways and processes in these three liver cancers were also identified. Using GSE15765 datasets downloaded from NCBI GEO database, the gene expression profiling of HCC, CC, and CHC were compared with each other (HCC compared with CC, HCC compared with CHC, and CC compared with HCC). Then, the differentially expressed genes (DEGs) were identified in these three groups respectively, and three PPI networks were constructed for DEGs in each group. Subsequently, the clusters in these networks were identified and further analyzed by ClusterONE and MCODE. Finally, gene set enrichment analysis enrichment analysis was performed to illustrate altered pathways and processes for each type of liver cancer. A total of 112, 530, and 64 DEGs were identified in three groups, respectively, and three PPI networks were constructed respectively for the corresponding group. Through the cluster analysis, we found some new differential marker genes for distinguishing the difference between these three types of liver cancer. We also indicated that we can distinguish HCC with CC through altered pathways and processes. Our findings develop new biomarkers for categorizing the primary liver cancer and may improve patient prognosis of these cancers. However, further validation is required since our results were based on microarray data derived from a small sample size.

  2. Symposium introduction: the first joint American Chemical Society Agricultural and Food Chemistry Division and the American Chemical Society International Chemical Sciences Chapter in Thailand

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The American Chemical Society (ACS) Agricultural and Food Chemistry Division (AGFD) and the ACS International Chemical Sciences Chapter in Thailand (ICSCT) worked together to stage the “1st Joint ACS AGFD - ACS ICSCT Symposium on Agricultural and Food Chemistry,” which was held in Bangkok, Thailand ...

  3. Alkali metal mediated C-C bond coupling reaction

    NASA Astrophysics Data System (ADS)

    Tachikawa, Hiroto

    2015-02-01

    Metal catalyzed carbon-carbon (C-C) bond formation is one of the important reactions in pharmacy and in organic chemistry. In the present study, the electron and hole capture dynamics of a lithium-benzene sandwich complex, expressed by Li(Bz)2, have been investigated by means of direct ab-initio molecular dynamics method. Following the electron capture of Li(Bz)2, the structure of [Li(Bz)2]- was drastically changed: Bz-Bz parallel form was rapidly fluctuated as a function of time, and a new C-C single bond was formed in the C1-C1' position of Bz-Bz interaction system. In the hole capture, the intermolecular vibration between Bz-Bz rings was only enhanced. The mechanism of C-C bond formation in the electron capture was discussed on the basis of theoretical results.

  4. Alkali metal mediated C-C bond coupling reaction.

    PubMed

    Tachikawa, Hiroto

    2015-02-14

    Metal catalyzed carbon-carbon (C-C) bond formation is one of the important reactions in pharmacy and in organic chemistry. In the present study, the electron and hole capture dynamics of a lithium-benzene sandwich complex, expressed by Li(Bz)2, have been investigated by means of direct ab-initio molecular dynamics method. Following the electron capture of Li(Bz)2, the structure of [Li(Bz)2](-) was drastically changed: Bz-Bz parallel form was rapidly fluctuated as a function of time, and a new C-C single bond was formed in the C1-C1' position of Bz-Bz interaction system. In the hole capture, the intermolecular vibration between Bz-Bz rings was only enhanced. The mechanism of C-C bond formation in the electron capture was discussed on the basis of theoretical results.

  5. Ceramic joints

    DOEpatents

    Miller, Bradley J.; Patten, Jr., Donald O.

    1991-01-01

    Butt joints between materials having different coefficients of thermal expansion are prepared having a reduced probability of failure of stress facture. This is accomplished by narrowing/tapering the material having the lower coefficient of thermal expansion in a direction away from the joint interface and not joining the narrow-tapered surface to the material having the higher coefficient of thermal expansion.

  6. AC/DC converter

    NASA Astrophysics Data System (ADS)

    Jain, Praveen K.

    1992-08-01

    In a system such as a 20 kHz space station primary electrical power distribution system, power conversion from AC to DC is required. Some of the basic requirements for this conversion are high efficiency, light weight and small volume, regulated output voltage, close to unity input power factor, distortionless input current, soft-starting, low electromagnetic interference, and high reliability. An AC-to-DC converter is disclosed which satisfies the main design objectives of such converters for use in space. The converter of the invention comprises an input transformer, a resonant network, a current controller, a diode rectifier, and an output filter. The input transformer is for connection to a single phase, high frequency, sinusoidal waveform AC voltage source and provides a matching voltage isolating from the AC source. The resonant network converts this voltage to a sinusoidal, high frequency bidirectional current output, which is received by the current controller to provide the desired output current. The diode rectifier is connected in parallel with the current controller to convert the bidirectional current into a unidirectional current output. The output filter is connected to the rectifier to provide an essentially ripple-free, substantially constant voltage DC output.

  7. AC/RF Superconductivity

    SciTech Connect

    Ciovati, Gianluigi

    2015-02-01

    This contribution provides a brief introduction to AC/RF superconductivity, with an emphasis on application to accelerators. The topics covered include the surface impedance of normal conductors and superconductors, the residual resistance, the field dependence of the surface resistance, and the superheating field.

  8. Cell volume regulation in hemoglobin CC and AA erythrocytes

    SciTech Connect

    Berkowitz, L.R.; Orringer, E.P.

    1987-03-01

    Swelling hemoglobin CC erythrocytes stimulates a ouabain-insensitive K flux that restores original cell volume. Studies were performed with the K analog, /sup 86/Rb. This volume regulatory pathway was characterized for its anion dependence, sensitivity to loop diuretics, and requirement for Na. The swelling-induced K flux was eliminated if intracellular chloride was replaced by nitrate and both swelling-activated K influx and efflux were partially inhibited by 1 mM furosemide or bumetanide. K influx in swollen hemoglobin CC cells was not diminished when Na in the incubation medium was replaced with choline, indicating Na independence of the swelling-induced flux. Identical experiments with hemoglobin AA cells also demonstrated a swelling-induced increase in K flux, but the magnitude and duration of this increase were considerably less than that seen with hemoglobin CC cells. The increased K flux in hemoglobin AA cells was likewise sensitive to anion replacement and to loop diuretics and did not require the presence of Na. These data indicate that a volume-activated K pathway with similar transport characteristics exists in both hemoglobin CC and AA red cells.

  9. Explicitly Correlated Methods within the ccCA Methodology.

    PubMed

    Mahler, Andrew; Wilson, Angela K

    2013-03-12

    The prediction of energetic properties within "chemical accuracy" (1 kcal mol(-1) from well-established experiment) can be a major challenge in computational quantum chemistry due to the computational requirements (computer time, memory, and disk space) needed to achieve this level of accuracy. Methodologies such as coupled cluster with single, double, and perturbative triple excitations (CCSD(T)) combined with very large basis sets are often required to reach this level of accuracy. Unfortunately, such calculations quickly become cost prohibitive as system size increases. Our group has developed an ab initio composite method, the correlation consistent Composite Approach (ccCA), which enables such accuracy to be possible, on average, but at reduced computational cost as compared with CCSD(T) in combination with a large basis set. While ccCA has proven quite useful, computational bottlenecks still occur. In this study, the means to reduce the computational cost of ccCA without compromising accuracy by utilizing explicitly correlated methods within ccCA have been considered, and an alternative formulation is described.

  10. Crossing Levels and Representations: The Connected Chemistry (CC1) Curriculum

    ERIC Educational Resources Information Center

    Levy, Sharona T.; Wilensky, Uri

    2009-01-01

    Connected Chemistry (named CC1 to denote Connected Chemistry Chapter 1) is a computer-based environment for learning the topics of gas laws and kinetic molecular theory in chemistry. It views chemistry from an "emergent" perspective, how macroscopic phenomena result from the interaction of many submicroscopic particles. Connected Chemistry employs…

  11. BB: Half Section; Top of Engine; Valve Gear Detail; CC: ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    B-B: Half Section; Top of Engine; Valve Gear Detail; C-C: Top of Condenser; D-D: Condenser Interior; Air Pump Piston; Air Pump Lever; Water Pump - Steamboat COLUMBUS, Submerged south-southeast of Point Lookout, Scotland, St. Mary's County, MD

  12. 32. SECTIONS AA, BB, CC, DD, AND EE WASTE CALCINATION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. SECTIONS A-A, B-B, C-C, D-D, AND E-E WASTE CALCINATION FACILITY SHOWING RELATIONSHIPS OF DIFFERENT FLOOR LEVELS TO ONE ANOTHER. INEEL DRAWING NUMBER 200-0633-00-287-106353. FLUOR NUMBER 5775-CPP-633-A-3. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

  13. C-C bond-forming desulfurizations of sulfoximines.

    PubMed

    Reggelin, M; Slavik, S; Bühle, P

    2008-09-18

    Highly substituted, enantiomerically pure azaheterocyclic ring systems play an important role in medicinal chemistry as potential peptide mimetics. Metalated 2-alkenyl sulfoximines offer an efficient entry to this class of compounds. In this paper, we describe a new means to remove the sulfonimidoyl auxiliary with concomitant formation of a C-C double bond.

  14. Cohort profile: Antiretroviral Therapy Cohort Collaboration (ART-CC).

    PubMed

    May, Margaret T; Ingle, Suzanne M; Costagliola, Dominique; Justice, Amy C; de Wolf, Frank; Cavassini, Matthias; D'Arminio Monforte, Antonella; Casabona, Jordi; Hogg, Robert S; Mocroft, Amanda; Lampe, Fiona C; Dabis, François; Fätkenheuer, Gerd; Sterling, Timothy R; del Amo, Julia; Gill, M John; Crane, Heidi M; Saag, Michael S; Guest, Jodie; Brodt, Hans-Reinhard; Sterne, Jonathan A C

    2014-06-01

    The advent of effective combination antiretroviral therapy (ART) in 1996 resulted in fewer patients experiencing clinical events, so that some prognostic analyses of individual cohort studies of human immunodeficiency virus-infected individuals had low statistical power. Because of this, the Antiretroviral Therapy Cohort Collaboration (ART-CC) of HIV cohort studies in Europe and North America was established in 2000, with the aim of studying the prognosis for clinical events in acquired immune deficiency syndrome (AIDS) and the mortality of adult patients treated for HIV-1 infection. In 2002, the ART-CC collected data on more than 12,000 patients in 13 cohorts who had begun combination ART between 1995 and 2001. Subsequent updates took place in 2004, 2006, 2008, and 2010. The ART-CC data base now includes data on more than 70,000 patients participating in 19 cohorts who began treatment before the end of 2009. Data are collected on patient demographics (e.g. sex, age, assumed transmission group, race/ethnicity, geographical origin), HIV biomarkers (e.g. CD4 cell count, plasma viral load of HIV-1), ART regimen, dates and types of AIDS events, and dates and causes of death. In recent years, additional data on co-infections such as hepatitis C; risk factors such as smoking, alcohol and drug use; non-HIV biomarkers such as haemoglobin and liver enzymes; and adherence to ART have been collected whenever available. The data remain the property of the contributing cohorts, whose representatives manage the ART-CC via the steering committee of the Collaboration. External collaboration is welcomed. Details of contacts are given on the ART-CC website (www.art-cohort-collaboration.org).

  15. Cohort Profile: Antiretroviral Therapy Cohort Collaboration (ART-CC)

    PubMed Central

    May, Margaret T; Ingle, Suzanne M; Costagliola, Dominique; Justice, Amy C; de Wolf, Frank; Cavassini, Matthias; D’Arminio Monforte, Antonella; Casabona, Jordi; Hogg, Robert S; Mocroft, Amanda; Lampe, Fiona C; Dabis, François; Fätkenheuer, Gerd; Sterling, Timothy R; del Amo, Julia; Gill, M John; Crane, Heidi M; Saag, Michael S; Guest, Jodie; Brodt, Hans-Reinhard; Sterne, Jonathan AC

    2014-01-01

    The advent of effective combination antiretroviral therapy (ART) in 1996 resulted in fewer patients experiencing clinical events, so that some prognostic analyses of individual cohort studies of human immunodeficiency virus-infected individuals had low statistical power. Because of this, the Antiretroviral Therapy Cohort Collaboration (ART-CC) of HIV cohort studies in Europe and North America was established in 2000, with the aim of studying the prognosis for clinical events in acquired immune deficiency syndrome (AIDS) and the mortality of adult patients treated for HIV-1 infection. In 2002, the ART-CC collected data on more than 12,000 patients in 13 cohorts who had begun combination ART between 1995 and 2001. Subsequent updates took place in 2004, 2006, 2008, and 2010. The ART-CC data base now includes data on more than 70 000 patients participating in 19 cohorts who began treatment before the end of 2009. Data are collected on patient demographics (e.g. sex, age, assumed transmission group, race/ethnicity, geographical origin), HIV biomarkers (e.g. CD4 cell count, plasma viral load of HIV-1), ART regimen, dates and types of AIDS events, and dates and causes of death. In recent years, additional data on co-infections such as hepatitis C; risk factors such as smoking, alcohol and drug use; non-HIV biomarkers such as haemoglobin and liver enzymes; and adherence to ART have been collected whenever available. The data remain the property of the contributing cohorts, whose representatives manage the ART-CC via the steering committee of the Collaboration. External collaboration is welcomed. Details of contacts are given on the ART-CC website (www.art-cohort-collaboration.org). PMID:23599235

  16. Compliant joint

    NASA Technical Reports Server (NTRS)

    Eklund, Wayne D. (Inventor); Kerley, James J. (Inventor)

    1990-01-01

    A compliant joint is provided for prosthetic and robotic devices which permits rotation in three different planes. The joint provides for the controlled use of cable under motion. Perpendicular outer mounting frames are joined by swaged cables that interlock at a center block. Ball bearings allow for the free rotation of the second mounting frame relative to the first mounting frame within a predetermined angular rotation that is controlled by two stop devices. The cables allow for compliance at the stops and the cables allow for compliance in six degrees of freedom enabling the duplication or simulation of the rotational movement and flexibility of a natural hip or knee joint, as well as the simulation of a joint designed for a specific robotic component for predetermined design parameters.

  17. Joint Commission

    MedlinePlus

    Skip to main content The Joint Commission Log In | Request Guest Access Forgot password? | Log In Help Contact Us | Careers | JCR Web Store | Press Room Search Home Accreditation Accreditation Ambulatory Health ...

  18. Accurate Anharmonic IR Spectra from Integrated Cc/dft Approach

    NASA Astrophysics Data System (ADS)

    Barone, Vincenzo; Biczysko, Malgorzata; Bloino, Julien; Carnimeo, Ivan; Puzzarini, Cristina

    2014-06-01

    The recent implementation of the computation of infrared (IR) intensities beyond the double harmonic approximation [1] paved the route to routine calculations of infrared spectra for a wide set of molecular systems. Contrary to common beliefs, second-order perturbation theory is able to deliver results of high accuracy provided that anharmonic resonances are properly managed [1,2]. It has been already shown for several small closed- and open shell molecular systems that the differences between coupled cluster (CC) and DFT anharmonic wavenumbers are mainly due to the harmonic terms, paving the route to introduce effective yet accurate hybrid CC/DFT schemes [2]. In this work we present that hybrid CC/DFT models can be applied also to the IR intensities leading to the simulation of highly accurate fully anharmonic IR spectra for medium-size molecules, including ones of atmospheric interest, showing in all cases good agreement with experiment even in the spectral ranges where non-fundamental transitions are predominant[3]. [1] J. Bloino and V. Barone, J. Chem. Phys. 136, 124108 (2012) [2] V. Barone, M. Biczysko, J. Bloino, Phys. Chem. Chem. Phys., 16, 1759-1787 (2014) [3] I. Carnimeo, C. Puzzarini, N. Tasinato, P. Stoppa, A. P. Charmet, M. Biczysko, C. Cappelli and V. Barone, J. Chem. Phys., 139, 074310 (2013)

  19. Sim4cc: a cross-species spliced alignment program.

    PubMed

    Zhou, Leming; Pertea, Mihaela; Delcher, Arthur L; Florea, Liliana

    2009-06-01

    Advances in sequencing technologies have accelerated the sequencing of new genomes, far outpacing the generation of gene and protein resources needed to annotate them. Direct comparison and alignment of existing cDNA sequences from a related species is an effective and readily available means to determine genes in the new genomes. Current spliced alignment programs are inadequate for comparing sequences between different species, owing to their low sensitivity and splice junction accuracy. A new spliced alignment tool, sim4cc, overcomes problems in the earlier tools by incorporating three new features: universal spaced seeds, to increase sensitivity and allow comparisons between species at various evolutionary distances, and powerful splice signal models and evolutionarily-aware alignment techniques, to improve the accuracy of gene models. When tested on vertebrate comparisons at diverse evolutionary distances, sim4cc had significantly higher sensitivity compared to existing alignment programs, more than 10% higher than the closest competitor for some comparisons, while being comparable in speed to its predecessor, sim4. Sim4cc can be used in one-to-one or one-to-many comparisons of genomic and cDNA sequences, and can also be effectively incorporated into a high-throughput annotation engine, as demonstrated by the mapping of 64,000 Fagus grandifolia 454 ESTs and unigenes to the poplar genome.

  20. [Study on spectral emissivity of C/C composites].

    PubMed

    Zhu, Bo; Cao, Wei-Wei; Jing, Min; Dong, Xing-Guang; Wang, Cheng-Guo

    2009-11-01

    Different types of C/C composites were prepared by conventional molding, and the changes in normal spectral emissivity of samples were tested. The testing results show that spectral emissivity of C/C composite reinforced by short cut carbon fibers is generally higher than the sample reinforced by carbon cloth in the entire 2500-13000nm wavelength region. The structure of short cut carbon fibers is relatively loose and the number of material particles is less than other samples in unit volume, which increases the penetration depth of electromagnetic waves. This is the reason for higher normal spectral emissivity and better heat radiation property. Meanwhile, the test results of normal spectral emissivity for fiber perform and C/C composite samples show that the spectral emissivity of resin carbon is better than fiber carbon because of the difference in microstructure for the two kinds of carbon materials. Laser Raman spectroscopy was employed to analyze the microstructures of different carbon materials, and the results show that because sp3 and sp2 hybrid states of carbon atoms in resin carbon produced more vibration modes, the resin carbon also has higher normal spectral emissivity and better characteristics of heat radiation.

  1. AC resistance measuring instrument

    DOEpatents

    Hof, P.J.

    1983-10-04

    An auto-ranging AC resistance measuring instrument for remote measurement of the resistance of an electrical device or circuit connected to the instrument includes a signal generator which generates an AC excitation signal for application to a load, including the device and the transmission line, a monitoring circuit which provides a digitally encoded signal representing the voltage across the load, and a microprocessor which operates under program control to provide an auto-ranging function by which range resistance is connected in circuit with the load to limit the load voltage to an acceptable range for the instrument, and an auto-compensating function by which compensating capacitance is connected in shunt with the range resistance to compensate for the effects of line capacitance. After the auto-ranging and auto-compensation functions are complete, the microprocessor calculates the resistance of the load from the selected range resistance, the excitation signal, and the load voltage signal, and displays of the measured resistance on a digital display of the instrument. 8 figs.

  2. AC Resistance measuring instrument

    DOEpatents

    Hof, Peter J.

    1983-01-01

    An auto-ranging AC resistance measuring instrument for remote measurement of the resistance of an electrical device or circuit connected to the instrument includes a signal generator which generates an AC excitation signal for application to a load, including the device and the transmission line, a monitoring circuit which provides a digitally encoded signal representing the voltage across the load, and a microprocessor which operates under program control to provide an auto-ranging function by which range resistance is connected in circuit with the load to limit the load voltage to an acceptable range for the instrument, and an auto-compensating function by which compensating capacitance is connected in shunt with the range resistance to compensate for the effects of line capacitance. After the auto-ranging and auto-compensation functions are complete, the microprocessor calculates the resistance of the load from the selected range resistance, the excitation signal, and the load voltage signal, and displays of the measured resistance on a digital display of the instrument.

  3. AC Optimal Power Flow

    SciTech Connect

    2016-10-04

    In this work, we have implemented and developed the simulation software to implement the mathematical model of an AC Optimal Power Flow (OPF) problem. The objective function is to minimize the total cost of generation subject to constraints of node power balance (both real and reactive) and line power flow limits (MW, MVAr, and MVA). We have currently implemented the polar coordinate version of the problem. In the present work, we have used the optimization solver, Knitro (proprietary and not included in this software) to solve the problem and we have kept option for both the native numerical derivative evaluation (working satisfactorily now) as well as for analytical formulas corresponding to the derivatives being provided to Knitro (currently, in the debugging stage). Since the AC OPF is a highly non-convex optimization problem, we have also kept the option for a multistart solution. All of these can be decided by the user during run-time in an interactive manner. The software has been developed in C++ programming language, running with GCC compiler on a Linux machine. We have tested for satisfactory results against Matpower for the IEEE 14 bus system.

  4. Brief communication: Cineradiographic analysis of the chimpanzee (Pan troglodytes) talonavicular and calcaneocuboid joints.

    PubMed

    Thompson, Nathan E; Holowka, Nicholas B; O'Neill, Matthew C; Larson, Susan G

    2014-08-01

    During terrestrial locomotion, chimpanzees exhibit dorsiflexion of the midfoot between midstance and toe-off of stance phase, a phenomenon that has been called the "midtarsal break." This motion is generally absent during human bipedalism, and in chimpanzees is associated with more mobile foot joints than in humans. However, the contribution of individual foot joints to overall foot mobility in chimpanzees is poorly understood, particularly on the medial side of the foot. The talonavicular (TN) and calcaneocuboid (CC) joints have both been suggested to contribute significantly to midfoot mobility and to the midtarsal break in chimpanzees. To evaluate the relative magnitude of motion that can occur at these joints, we tracked skeletal motion of the hindfoot and midfoot during passive plantarflexion and dorsiflexion manipulations using cineradiography. The sagittal plane range of motion was 38 ± 10° at the TN joint and 14 ± 8° at the CC joint. This finding indicates that the TN joint is more mobile than the CC joint during ankle plantarflexion-dorsiflexion. We suggest that the larger range of motion at the TN joint during dorsiflexion is associated with a rotation (inversion-eversion) across the transverse tarsal joint, which may occur in addition to sagittal plane motion.

  5. Identification of /sup 233/Ac

    SciTech Connect

    Chu, Y.Y.; Zhou, M.L.

    1983-09-01

    We report in this paper identification of the new isotope /sup 233/Ac. Uranium targets were irradiated with 28 GeV protons; after rapid retrieval of the target and separation of actinium from thorium, /sup 233/Ac was allowed to decay into the known /sup 233/Th daughter. Exhaustive chemical purification was employed to permit the identification of /sup 233/Th via its characteristic ..gamma.. radiations. The half-life derived for /sup 233/Ac from several experiments is 2.3 +- 0.3 min. The production cross section for /sup 233/Ac is 100 ..mu..b.

  6. GENXICC: A generator for hadronic production of the double heavy baryons ΞccΞcc, ΞbcΞbc and ΞbbΞbb

    NASA Astrophysics Data System (ADS)

    Chang, Chao-Hsi; Wang, Jian-Xiong; Wu, Xing-Gang

    2007-09-01

    We write down a generator program for the hadronic production of the double-heavy baryons Ξ, Ξ and Ξ according to relevant publications. We name it as GENXICC and we test it by comparing its numerical results with those in references. It is written in a PYTHIA-compatible format and it can be easily implemented into PYTHIA. GENXICC is also written in modularization manner, with make, a GNU C compiler, one may apply the generator to various situations or experimental environments very conveniently. Program summaryProgram title:GENXICC Catalogue identifier:ADZJ_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADZJ_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions:Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.:99 252 No. of bytes in distributed program, including test data, etc.:1 432 846 Distribution format:tar.gz Programming language:FORTRAN77/90 Computer:Any LINUX based on PC with FORTRAN77 or FORTRAN90 and GNU C compiler installed Operating systems:LINUX RAM:About 2.0 MB Classification:11.2 Nature of problem:Hadronic production of a double-heavy baryons: Ξ, Ξ and Ξ. Solution method:The production of the double-heavy baryons is realized by producing a binding double-heavy diquark either (QQ)[3]3¯,6 ( Q,Q=b,c) or (QQ)[1]3¯,6, which is in color anti-triplet 3¯ or color sextuplet 6 and in S-wave triplet or singlet configuration, respectively, and then by absorbing a proper light quark non-perturbatively. For the production of the various double-heavy baryons Ξ, Ξ and Ξ, the 'gluon-gluon fusion' mechanism, being the most important, is written precisely in the generator, but two additional mechanisms, i.e. the 'gluon-charm collision' and the 'charm-charm collision' ones, only for Ξ ( Ξcc+ or Ξcc++) are written. Furthermore, all the mechanisms are treated consistently within the general-mass flavor

  7. Hypermobile joints

    MedlinePlus

    ... A.M. Editorial team. Related MedlinePlus Health Topics Joint Disorders Browse the Encyclopedia A.D.A.M., Inc. is accredited by URAC, also known as the American Accreditation HealthCare Commission (www.urac.org). URAC's accreditation program is an ...

  8. Digital ac monitor

    DOEpatents

    Hart, George W.; Kern, Jr., Edward C.

    1987-06-09

    An apparatus and method is provided for monitoring a plurality of analog ac circuits by sampling the voltage and current waveform in each circuit at predetermined intervals, converting the analog current and voltage samples to digital format, storing the digitized current and voltage samples and using the stored digitized current and voltage samples to calculate a variety of electrical parameters; some of which are derived from the stored samples. The non-derived quantities are repeatedly calculated and stored over many separate cycles then averaged. The derived quantities are then calculated at the end of an averaging period. This produces a more accurate reading, especially when averaging over a period in which the power varies over a wide dynamic range. Frequency is measured by timing three cycles of the voltage waveform using the upward zero crossover point as a starting point for a digital timer.

  9. Digital ac monitor

    DOEpatents

    Hart, G.W.; Kern, E.C. Jr.

    1987-06-09

    An apparatus and method is provided for monitoring a plurality of analog ac circuits by sampling the voltage and current waveform in each circuit at predetermined intervals, converting the analog current and voltage samples to digital format, storing the digitized current and voltage samples and using the stored digitized current and voltage samples to calculate a variety of electrical parameters; some of which are derived from the stored samples. The non-derived quantities are repeatedly calculated and stored over many separate cycles then averaged. The derived quantities are then calculated at the end of an averaging period. This produces a more accurate reading, especially when averaging over a period in which the power varies over a wide dynamic range. Frequency is measured by timing three cycles of the voltage waveform using the upward zero crossover point as a starting point for a digital timer. 24 figs.

  10. Cooling Floor AC Systems

    NASA Astrophysics Data System (ADS)

    Jun, Lu; Hao, Ding; Hong, Zhang; Ce, Gao Dian

    The present HVAC equipments for the residential buildings in the Hot-summer-and-Cold-winter climate region are still at a high energy consuming level. So that the high efficiency HVAC system is an urgently need for achieving the preset government energy saving goal. With its advantage of highly sanitary, highly comfortable and uniform of temperature field, the hot-water resource floor radiation heating system has been widely accepted. This paper has put forward a new way in air-conditioning, which combines the fresh-air supply unit and such floor radiation system for the dehumidification and cooling in summer or heating in winter. By analyze its advantages and limitations, we found that this so called Cooling/ Heating Floor AC System can improve the IAQ of residential building while keep high efficiency quality. We also recommend a methodology for the HVAC system designing, which will ensure the reduction of energy cost of users.

  11. Automated ac galvanomagnetic measurement system

    NASA Technical Reports Server (NTRS)

    Szofran, F. R.; Espy, P. N.

    1985-01-01

    An automated, ac galvanomagnetic measurement system is described. Hall or van der Pauw measurements in the temperature range 10-300 K can be made at a preselected magnetic field without operator attendance. Procedures to validate sample installation and correct operation of other system functions, such as magnetic field and thermometry, are included. Advantages of ac measurements are discussed.

  12. Structural And Functional Characterization of CC Chemokine CCL14

    SciTech Connect

    Blain, K.Y.; Kwiatkowski, W.; Zhao, Q.; Fleur, D.La; Naik, C.; Chun, T.-W.; Tsareva, T.; Kanakaraj, P.; Laird, M.W.; Shah, R.; George, L.; Sanyal, I.; Moore, P.A.; Demeler, B.; Choe, S.

    2009-06-02

    CC chemokine ligand 14, CCL14, is a human CC chemokine that is of recent interest because of its natural ability, upon proteolytic processing of the first eight NH{sub 2}-terminal residues, to bind to and signal through the human immunodeficiency virus type-1 (HIV-1) co-receptor, CC chemokine receptor 5 (CCR5). We report X-ray crystallographic structures of both full-length CCL14 and signaling-active, truncated CCL14 [9-74] determined at 2.23 and 1.8 {angstrom}, respectively. Although CCL14 and CCL14 [9-74] differ in their ability to bind CCR5 for biological signaling, we find that the NH{sub 2}-terminal eight amino acids (residues 1 through 8) are completely disordered in CCL14 and both show the identical mode of the dimeric assembly characteristic of the CC type chemokine structures. However, analytical ultracentrifugation studies reveal that the CCL14 is stable as a dimer at a concentration as low as 100 nM, whereas CCL14 [9-74] is fully monomeric at the same concentration. By the same method, the equilibrium between monomers of CCL14 [9-74] and higher order oligomers is estimated to be of EC{sub 1,4} = 4.98 {mu}M for monomer-tetramer conversion. The relative instability of CCL14 [9-74] oligomers as compared to CCL14 is also reflected in the K{sub d}'s that are estimated by the surface plasmon resonance method to be {approx}9.84 and 667 nM for CCL14 and CCL14 [9-74], respectively. This {approx}60-fold difference in stability at a physiologically relevant concentration can potentially account for their different signaling ability. Functional data from the activity assays by intracellular calcium flux and inhibition of CCR5-mediated HIV-1 entry show that only CCL14 [9-74] is fully active at these near-physiological concentrations where CCL14 [9-74] is monomeric and CCL14 is dimeric. These results together suggest that the ability of CCL14 [9-74] to monomerize can play a role for cellular activation.

  13. Serotype IV Streptococcus agalactiae ST-452 has arisen from large genomic recombination events between CC23 and the hypervirulent CC17 lineages

    PubMed Central

    Campisi, Edmondo; Rinaudo, C. Daniela; Donati, Claudio; Barucco, Mara; Torricelli, Giulia; Edwards, Morven S.; Baker, Carol J.; Margarit, Imma; Rosini, Roberto

    2016-01-01

    Streptococcus agalactiae (Group B Streptococcus, GBS) causes life-threatening infections in newborns and adults with chronic medical conditions. Serotype IV strains are emerging both among carriers and as cause of invasive disease and recent studies revealed two main Sequence Types (STs), ST-452 and ST-459 assigned to Clonal Complexes CC23 and CC1, respectively. Whole genome sequencing of 70 type IV GBS and subsequent phylogenetic analysis elucidated the localization of type IV isolates in a SNP-based phylogenetic tree and suggested that ST-452 could have originated through genetic recombination. SNPs density analysis of the core genome confirmed that the founder strain of this lineage originated from a single large horizontal gene transfer event between CC23 and the hypervirulent CC17. Indeed, ST-452 genomes are composed by two parts that are nearly identical to corresponding regions in ST-24 (CC23) and ST-291 (CC17). Chromosome mapping of the major GBS virulence factors showed that ST-452 strains have an intermediate yet unique profile among CC23 and CC17 strains. We described unreported large recombination events, involving the cps IV operon and resulting in the expansion of serotype IV to CC23. This work sheds further light on the evolution of GBS providing new insights on the recent emergence of serotype IV. PMID:27411639

  14. Serotype IV Streptococcus agalactiae ST-452 has arisen from large genomic recombination events between CC23 and the hypervirulent CC17 lineages.

    PubMed

    Campisi, Edmondo; Rinaudo, C Daniela; Donati, Claudio; Barucco, Mara; Torricelli, Giulia; Edwards, Morven S; Baker, Carol J; Margarit, Imma; Rosini, Roberto

    2016-07-14

    Streptococcus agalactiae (Group B Streptococcus, GBS) causes life-threatening infections in newborns and adults with chronic medical conditions. Serotype IV strains are emerging both among carriers and as cause of invasive disease and recent studies revealed two main Sequence Types (STs), ST-452 and ST-459 assigned to Clonal Complexes CC23 and CC1, respectively. Whole genome sequencing of 70 type IV GBS and subsequent phylogenetic analysis elucidated the localization of type IV isolates in a SNP-based phylogenetic tree and suggested that ST-452 could have originated through genetic recombination. SNPs density analysis of the core genome confirmed that the founder strain of this lineage originated from a single large horizontal gene transfer event between CC23 and the hypervirulent CC17. Indeed, ST-452 genomes are composed by two parts that are nearly identical to corresponding regions in ST-24 (CC23) and ST-291 (CC17). Chromosome mapping of the major GBS virulence factors showed that ST-452 strains have an intermediate yet unique profile among CC23 and CC17 strains. We described unreported large recombination events, involving the cps IV operon and resulting in the expansion of serotype IV to CC23. This work sheds further light on the evolution of GBS providing new insights on the recent emergence of serotype IV.

  15. Joint assembly

    NASA Technical Reports Server (NTRS)

    Wilson, Andrew (Inventor); Punnoose, Andrew (Inventor); Strausser, Katherine (Inventor); Parikh, Neil (Inventor)

    2010-01-01

    A joint assembly is provided which includes a drive assembly and a swivel mechanism. The drive assembly features a motor operatively associated with a plurality of drive shafts for driving auxiliary elements, and a plurality of swivel shafts for pivoting the drive assembly. The swivel mechanism engages the swivel shafts and has a fixable element that may be attached to a foundation. The swivel mechanism is adapted to cooperate with the swivel shafts to pivot the drive assembly with at least two degrees of freedom relative to the foundation. The joint assembly allows for all components to remain encased in a tight, compact, and sealed package, making it ideal for space, exploratory, and commercial applications.

  16. Joint Warrior

    DTIC Science & Technology

    2011-05-04

    hour per response , including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and...reflect my own personal views and are not necessarily endorsed by the NWC or the Department of the Navy. 14. ABSTRACT The way we fight wars has been...evolving over thousands of years. Today, the U.S. Navy, finds itself in the post- modern area of war fighting . Joint warfare is the latest

  17. 29 CFR Appendix A to Subpart Cc of... - Standard Hand Signals

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Standard Hand Signals A Appendix A to Subpart CC of Part 1926 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Construction Pt. 1926, Subpt. CC, App. A Appendix A to Subpart CC of Part 1926—Standard Hand Signals...

  18. 29 CFR Appendix A to Subpart Cc of... - Standard Hand Signals

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Standard Hand Signals A Appendix A to Subpart CC of Part 1926 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Construction Pt. 1926, Subpt. CC, App. A Appendix A to Subpart CC of Part 1926—Standard Hand Signals...

  19. 29 CFR Appendix A to Subpart Cc of... - Standard Hand Signals

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Standard Hand Signals A Appendix A to Subpart CC of Part 1926 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Construction Pt. 1926, Subpt. CC, App. A Appendix A to Subpart CC of Part 1926—Standard Hand Signals...

  20. 29 CFR Appendix A to Subpart Cc of... - Standard Hand Signals

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Standard Hand Signals A Appendix A to Subpart CC of Part 1926 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Construction Pt. 1926, Subpt. CC, App. A Appendix A to Subpart CC of Part 1926—Standard Hand Signals...

  1. Swift Observations Of CC Eri: X-Ray Superflare

    NASA Astrophysics Data System (ADS)

    Karmakar, Subhajeet; Pandey, Jeewan C.

    2016-08-01

    We present ananalysis of a superflare detected on an active binary system CC Eridani by Swift observatory. The flare (F1) triggeredthe Burst Alert Telescope (BAT) in the hard X-ray band on 2008 October 16. The rise-phase was observed only with BAT, whereasthe decay phase was observed simultaneously with X-Ray Telescope (XRT). The e-folding decay time indicates a faster decayin the hard X-ray band than in the soft X-ray band. Spectral analysis indicates a presence of three temperature corona withfirst two plasma temperatures remain constant during the flare at ˜3 and ˜10 MK. The flare-temperature peaked at 342 MKwhich is ˜4 times more than the minimum value observed at post-flaring (PF) phase. The abundances peaked at 2 times thesolar abundances, which is also ˜11 times larger than the quiescent state value. Using hydrodynamic loop modeling we derivea loop-length of 1.25±0.13×10^{10} cm. The peak X-ray luminosity for flares F1 in the 0.3-50 keV energy band (excluding 10-14keV band) reached up to ˜4×10^{32} erg s^{-1} , which is ˜3500 times more than the quiescent value and larger than any otherflares previously observed on CC Eri.

  2. Energy Materials Coordinating Committee (EMaCC), Fiscal year 1989

    SciTech Connect

    1991-03-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. Four topical subcommittees are established and are continuing their own programs: Structural Ceramics, Electrochemical Technologies, Radioactive Waste Containment, and Superconductivity. In addition, the EMaCC aids in obtaining materials-related inputs for both intra- and inter-agency compilations. The first part of the Program Descriptions consists of a funding summary for each Assistant Secretary office and the Office of Energy Research. This is followed by a summary of project titles and objectives, including the program/project manager(s) and principal investigator. The second part of the Program Descriptions consists of more detailed project summaries with project goals and accomplishments.

  3. Acute septic arthritis of the acromioclavicular joint caused by Haemophilus parainfluenzae: a rare causative origin.

    PubMed

    Hong, Myong-Joo; Kim, Yeon-Dong; Ham, Hyang-Do

    2015-04-01

    Septic arthritis of the acromioclavicular (AC) joint is a rare entity with symptoms that include erythema, swelling, and tenderness over the AC joint, fever, and limitation of shoulder motion with pain. In previous reports, Staphylococcus and Streptococcus species have been mentioned as common causative organisms. Haemophilus parainfluenzae is a normal inhabitant of the oral cavity, respiratory tract, gastrointestinal tract, and urogenital tract. However, it sometimes causes opportunistic infections leading to septic arthritis and osteomyelitis. AC joint infection associated with H.parainfluenzae is very rare, and only one case has been reported in the literature. Moreover, septic arthritis in immunocompetent patients is also very rare. Here, we report the case of a healthy patient with H. parainfluenzae-related septic arthritis of the AC joint.

  4. Do Joint Fighter Programs Save Money? Technical Appendixes on Methodology

    DTIC Science & Technology

    2013-01-01

    quality and objectivity. C O R P O R A T I O N Do Joint Fighter Programs Save Money? Technical Appendixes on Methodology Mark A. Lorell, Michael...programs.3 Define CC( n ) as the cumulative cost of producing n units of the aircraft. Then, an 87 percent cost-quantity improvement curve is represented...by the equation4 CC n ( ) = A n ( )! . Here, A is the cost of the first unit, and β is a coefficient defined by ! = ln "( ) ln 2

  5. Layoff Handling Still Lags ACS Standards.

    ERIC Educational Resources Information Center

    Chemical and Engineering News, 1981

    1981-01-01

    Reviews termination procedures of professional chemists and the compliance of these terminations to the American Chemical Society's (ACS's) Professional Employment Guidelines. Provides the ACS guidelines. (DS)

  6. Isolation and characterization of a proteinaceous α-amylase inhibitor AAI-CC5 from Streptomyces sp. CC5, and its gene cloning and expression.

    PubMed

    Sun, Zhibin; Lu, Weihao; Liu, Pingping; Wang, Hui; Huang, Yan; Zhao, Yuguo; Kong, Yi; Cui, Zhongli

    2015-02-01

    An α-amylase inhibitor producing Streptomyces sp. strain CC5 was isolated from soil. A proteinaceous α-amylase inhibitor AAI-CC5 was purified from strain CC5. AAI-CC5 specifically inhibited mammalian α-amylases. The molecular weight of the inhibitor was determined to be 8,212 Da by MALDI-TOF Mass Spectrum. The N-terminal 15 amino acid residues of the purified AAI-CC5 were DTGSPAPECVEYFQS, which is dissimilar to other reported proteinaceous α-amylase inhibitors. AAI-CC5 is a pH insensitive and heat-stable protein, and cannot be hydrolysed by trypsin. AAI-CC5 was cloned and expressed in Escherichia coli BL21 (DE3) with a hexa-histidine tag on the C terminal. AAI-CC5 shared 82 % identity with Parvulustat. The recombinant α-amylase inhibitor was purified to homogeneity by one-step affinity chromatography using Ni(2+)-NTA resin with molecular mass of 9,404 Da. Steady state kinetics studies of α-amylase and the inhibitor revealed an irreversible, non-competitive inhibition mechanism with IC50 and Ki value of 6.43 ×1 10(-11) and 4.45 × 10(-11) M respectively. These results suggest this novel α-amylase inhibitor possessed powerful inhibitory activity for α-amylase, and it may be a candidate in research of diabetes therapy and obesity treatment.

  7. AC photovoltaic module magnetic fields

    SciTech Connect

    Jennings, C.; Chang, G.J.; Reyes, A.B.; Whitaker, C.M.

    1997-12-31

    Implementation of alternating current (AC) photovoltaic (PV) modules, particularly for distributed applications such as PV rooftops and facades, may be slowed by public concern about electric and magnetic fields (EMF). This paper documents magnetic field measurements on an AC PV module, complementing EMF research on direct-current PV modules conducted by PG and E in 1993. Although not comprehensive, the PV EMF data indicate that 60 Hz magnetic fields (the EMF type of greatest public concern) from PV modules are comparable to, or significantly less than, those from household appliances. Given the present EMF research knowledge, AC PV module EMF may not merit considerable concern.

  8. [Comporison Sduty of Microstructure by Metallographicalk on the Polarized Light and Texture by XRD of CC 5083 and CC 5182 Aluminium Alloy after Cold Rolling and Recrystallization].

    PubMed

    Chen, Ming-biao; Li, Yong-wei; Tan, Yuan-biao; Ma, Min; Wang, Xue-min; Liu, Wen-chang

    2015-03-01

    At present the study of relation between microstructure, texture and performance of CC 5083 aluminium alloy after cold tolling and recrystallization processes is still finitude. So that the use of the CC 5083 aluminium alloy be influenced. Be cased into electrical furnace, hot up with unlimited speed followed the furnace hot up to different temperature and annealed 2h respectively, and be cased into salt-beth furnace, hot up quickly to different temperature and annealed 30 min respectively for CC 5083 and CC 5182 aluminum alloy after cold roling with 91.5% reduction. The microstructure be watched use metallographic microscope, the texture be inspected by XRD. The start temperature of recrystallization and grain grow up temperature within annealing in the electric furnace of CC 5083 aluminum alloy board is 343 degrees C, and the shap of grain after grow up with long strip (the innovation point ); The start temperature of recrystallization within annealling in the salt bath furnace of CC 5083 is 343 degrees C. The start temperature and end temperature of recrystallization within annealling of CC 5083 and CC 5182 aluminum alloy is 371 degrees C. The grain grow up outstanding of cold rooled CC 5152 aluminum alloy after annealed with 454 degrees C in the electric furnace and salt bath furnace. The start temperature of grain grow up of CC 5083 alluminurn alloy annealed in the electric furnace and salt bath furnace respectively is higher than the start temperature of grain grow up of CC 5182 alluminum alloy annealed in the electric furnace and salt bath furnace respectively. The strat temperature of recrystallization grain grow up is higher than which annealled with other three manner annealing process. The recrystallization temperature of CC 5182 annealed in the salt bath furnace is higher than which annealed in the electric furnace. The recrystallization temperature of the surface layer of CC 5083 and CC 5182 aluminum alloy is higher than the inner layer (the innovation

  9. A Simple Test to Determine the Effectiveness of Different Braze Compositions for Joining Ti-Tubes to C/C Composite Plates

    NASA Technical Reports Server (NTRS)

    Morscher, Gregory N.; Singh, Mrityunjay; Shpargel, Tarah; Asthana, Rajiv

    2006-01-01

    A simple tube-plate joint tensile test was implemented to compare the effectiveness of commercial brazes, namely, TiCuNi, TiCuSil, and Cu-ABA, used for bonding Ti-tubes joined to C-C composite plates. The different braze systems yielded different; yet, repeatable results. The Cu-ABA system proved to have about twice the load-carrying ability of the other two systems due to the fact that the bonded area between the braze material and the C-C plate was largest for this system. The orientation of the surface fiber tows also had a significant effect on load-carrying ability with tows oriented perpendicular to the tube axis displaying the highest failure loads. Increasing the process load and modifying the surface of the C-C plate by grooving out channels for the Ti-Tube to nest in resulted in increased load-carrying ability for the TiCuSil and Cu-ABA systems due to increased bonded area and better penetration of the braze material into the C-C composite.

  10. New Results on RZ Leo and CC Scl

    NASA Astrophysics Data System (ADS)

    Szkody, Paula; Mukadam, Anjum S.; Gaensicke, Boris T.; Toloza, Odette; Dai, Zhibin; HST GO12870 Team

    2017-01-01

    Using HST COS ultraviolet spectra in time-tag mode and a long K2 observation, we have determined a spin period for the white in RZ Leo of 220 seconds, thus confirming this cataclysmic variable as a new member of the Intermediate Polar class of systems. The ultraviolet light curve of CC Scl at quiescence created from its COS spectral observations is dominated by its spin period of 195 seconds (that has only been previously observed during one of its outbursts). Spectra formed from the high and low sections of its light curve shows a temperature difference of several thousand degrees.PS and ASM acknowledge support from NASA grant HST-GO13807 and from NSF grant AST-1514737.

  11. Results of the BETS Survey of the CC Cryostat

    SciTech Connect

    Luther, R.D.; /Fermilab

    1988-01-07

    This Engineering Note presents results of dimensional surveys of the CC Cryostat. The surveys were performed by members of the Fermilab Alignment Group using a computerized optical system known as BETS. The coordinate system used is described on page 1 of the note. Locations of the support bosses in the inner vessel are given on pages 2 and 3. The bosses control the position of the module array within the cryostat. Locations of the center cylinders (bores) and bypass tubes in both vessels are given on pages 2 and 4 through 6. Elevations and locations of the nozzles on top of the cryostat are given on page 9. Measurements of the stack-up heights of the support stanchions are given on page 13. Raw BETS data are included in Appendix A of the Note.

  12. Simulating CC and MLO compressions with the Surface Evolver

    NASA Astrophysics Data System (ADS)

    Zanchetta do Nascimento, Marcelo; Ramos Batista, Valério

    2015-01-01

    Mammographies are X-ray images of the breast under external compressions called Craniocaudal (CC) and Mediolateral Oblique (MLO). Together they increase the chances of detecting cancer but the breast is shown in strongly deformed shapes. Cancer location is highly uncertain for the surgery and so the breast is commonly taken out entirely, a serious trauma for the patient. In this paper we present a fully virtual mammography procedure that faithfully reproduces all shapes of the breast and in its inside tracks the cancer at any step. The cancer is then precisely located for the surgery and can be removed through a small incision. So the whole structure is preserved and cured as an integral benefit to the patient.

  13. Mirrors fabricated with slightly oxidized C/C composites

    NASA Astrophysics Data System (ADS)

    Wang, Yongjie; Xu, Liang; Ding, Jiaoteng; Xie, Yongjie; Ma, Zhen

    2016-10-01

    Up to now, traditional materials, such as glass, metal and SiC ceramic, gradually begin to be unsatisfied development of the future mirrors. Designable carbon fiber reinforced composites became optimized material for large aperture lightweight mirrors. Carbon/carbon composites exhibit low thermal expansion and no moisture-absorption expansion problem, therefore, they get particular attention in the space reflector field. Ni was always employed as optical layer in the mirror, however, the coating behaved poor bond with substrate and often peeled off during optical processing. In order to solve this problem, slight oxidation was carried on the C/C composites before Ni plated. The Ni coating exhibited stronger coherence and better finish performance. Finally, a 100mm diameter plane mirror was successful fabricated.

  14. CC Chemokine Ligand 18 in ANCA-Associated Crescentic GN.

    PubMed

    Brix, Silke R; Stege, Gesa; Disteldorf, Erik; Hoxha, Elion; Krebs, Christian; Krohn, Sonja; Otto, Benjamin; Klätschke, Kristin; Herden, Elisabeth; Heymann, Felix; Lira, Sergio A; Tacke, Frank; Wolf, Gunter; Busch, Martin; Jabs, Wolfram J; Özcan, Fedai; Keller, Frieder; Beige, Joachim; Wagner, Karl; Helmchen, Udo; Noriega, Mercedes; Wiech, Thorsten; Panzer, Ulf; Stahl, Rolf A K

    2015-09-01

    ANCA-associated vasculitis is the most frequent cause of crescentic GN. To define new molecular and/or cellular biomarkers of this disease in the kidney, we performed microarray analyses of renal biopsy samples from patients with ANCA-associated crescentic GN. Expression profiles were correlated with clinical data in a prospective study of patients with renal ANCA disease. CC chemokine ligand 18 (CCL18), acting through CC chemokine receptor 8 (CCR8) on mononuclear cells, was identified as the most upregulated chemotactic cytokine in patients with newly diagnosed ANCA-associated crescentic GN. Macrophages and myeloid dendritic cells in the kidney were detected as CCL18-producing cells. The density of CCL18(+) cells correlated with crescent formation, interstitial inflammation, and impairment of renal function. CCL18 protein levels were higher in sera of patients with renal ANCA disease compared with those in sera of patients with other forms of crescentic GN. CCL18 serum levels were higher in patients who suffered from ANCA-associated renal relapses compared with those in patients who remained in remission. Using a murine model of crescentic GN, we explored the effects of the CCL18 murine functional analog CCL8 and its receptor CCR8 on kidney function and morphology. Compared with wild-type mice, Ccr8(-/-) mice had significantly less infiltration of pathogenic mononuclear phagocytes. Furthermore, Ccr8(-/-) mice maintained renal function better and had reduced renal tissue injury. In summary, our data indicate that CCL18 drives renal inflammation through CCR8-expressing cells and could serve as a biomarker for disease activity and renal relapse in ANCA-associated crescentic GN.

  15. Molecular characterization of miiuy croaker CC chemokine gene and its expression following Vibrio anguillarum injection.

    PubMed

    Cheng, Yuan-zhi; Wang, Ri-xin; Sun, Yue-na; Xu, Tian-jun

    2011-07-01

    A CC chemokine gene was isolated from miiuy croaker (Miichthys miiuy) by expressed sequence tag analysis. The Mimi-CC cDNA contains an open reading frame of 429 nucleotides encoding 142 amino acid residues. The deduced Mimi-CC possesses the typical arrangement of four cysteines as found in other known CC chemokines (C³¹, C³², C⁵⁶, and C⁷⁰). It shares 15.3%-37.4% identity to CC chemokines of mammal and teleost. Phylogenetic analysis showed that miiuy croaker was most closely related to Atlantic cod. Genomic analysis revealed that Mimi-CC gene consists of four exons and three introns, which is not typical of CC chemokines but resembles that of CXC chemokines. Real-time quantitative RT-PCR demonstrated that Mimi-CC is constitutively expressed in most tissues including lymphoid organs, and the highest expression of Mimi-CC transcripts in normal tissues was observed in muscle. Challenge of miiuy croaker with Vibrio anguillarum resulted in significant changes in the expression of CC chemokine transcripts in four tissues, especially in kidney and spleen.

  16. Molecular cloning, characterization and expression analysis of a CC chemokine gene from miiuy croaker (Miichthys miiuy).

    PubMed

    Cheng, Yuanzhi; Sun, Yuena; Shi, Ge; Wang, Rixin; Xu, Tianjun

    2012-12-01

    Chemokines are a family of structurally related chemotactic cytokines that regulate the migration of leukocytes, under both physiological and inflammatory conditions. A partial cDNA of CC chemokine gene designed as Mimi-CC3 was isolated from miiuy croaker (Miichthys miiuy) spleen cDNA library. Unknown 3' part of the cDNA was amplified by 3'-RACE. The complete cDNA of Mimi-CC3 contains an 89-nt 5'-UTR, a 303-nt open reading frame and a 441-nt 3'-UTR. Three exons and two introns were identified in Mimi-CC3. The deduced Mimi-CC3 protein sequences contain a 22 amino acids signal peptide and a 78 amino acids mature polypeptide, which possesses the typical arrangement of four cysteines as found in other known CC chemokines. It shares low amino acid sequence identities with most other fish and mammalian CC chemokines (less than 54.1 %), but shares very high identities with large yellow croaker CC chemokine (94.6 %). Phylogenetic analysis showed that Mimi-CC3 gene may have an orthologous relationship with mammalian/amphibian CCL25 gene. Tissue expression distributed analysis showed that Mimi-CC3 gene was constitutively expressed in all nine tissues examined, although at different levels. Upon stimulated with Vibrio anguillarum, the time-course analysis using a real-time PCR showed that Mimi-CC3 transcript in kidney and liver was obviously up-regulated and reached the peak levels, followed by a recovery. Mimi-CC3 expression in kidney was more strongly increased than in liver. However, down-regulation was observed in spleen. These results indicated that Mimi-CC3 plays important roles in miiuy croaker immune response as well as in homeostatic mechanisms.

  17. AC Cable: Yokohama Project

    NASA Astrophysics Data System (ADS)

    Masuda, Takato

    High Temperature Superconducting (HTS) cables can transmit large amounts of electricity in a compact size with minimal losses. Therefore, they are expected to save the construction cost of underground lines in urban areas and decrease transmission losses. Several HTS cables have recently been demonstrated in networks around the world, and full-scale commercialization is expected in the near future. In Japan, the development of compact HTS cables suitable for urban deployment has been underway since the early 1990s. In 2007, a national project was started to verify their operational performance and long-term reliability in the grid. An HTS cable 240 m long was installed at the Asahi substation of the Tokyo Electric Power Company (TEPCO) in Yokohama; then a joint, terminations and cooling system was constructed in 2011. After successful performance tests, the cable was connected to the grid for the first time in Japan, and started to deliver electricity to 70,000 households in October 2012. This trouble-free in-grid service continued for over a year. We can conclude that the HTS cable system performs well and has the stability required for long-term in-grid operations.

  18. Testing of DLR C/C-SiC and C/C for HIFiRE 8 Scramjet Combustor

    NASA Technical Reports Server (NTRS)

    Glass, David E.; Capriotti, Diego P.; Reimer, Thomas; Kutemeyer, Marius; Smart, Michael K.

    2014-01-01

    Ceramic Matrix Composites (CMCs) have been proposed for use as lightweight hot structures in scramjet combustors. Previous studies have calculated significant weight savings by utilizing CMCs (active and passive) versus actively cooled metallic scramjet structures. Both a carbon/carbon (C/C) and a carbon/carbon-silicon carbide (C/C-SiC) material fabricated by DLR (Stuttgart, Germany) are being considered for use in a passively cooled combustor design for Hypersonic International Flight Research Experimentation (HIFiRE) 8, a joint Australia / Air Force Research Laboratory hypersonic flight program, expected to fly at Mach 7 for approximately 30 sec, at a dynamic pressure of 55 kilopascals. Flat panels of the DLR C/C and C/C-SiC materials were installed downstream of a hydrogen-fueled, dual-mode scramjet combustor and tested for several minutes at conditions simulating flight at Mach 5 and Mach 6. Gaseous hydrogen fuel was used to fuel the scramjet combustor. The test panels were instrumented with embedded Type K and Type S thermocouples. Zirconia felt insulation was used during some of the tests to reduce heat loss from the back surface and thus increase the heated surface temperature of the C/C-SiC panel approximately 177 C (350 F). The final C/C-SiC panel was tested for three cycles totaling over 135 sec at Mach 6 enthalpy. Slightly more erosion was observed on the C/C panel than the C/C-SiC panels, but both material systems demonstrated acceptable recession performance for the HIFiRE 8 flight.

  19. Joint x-ray

    MedlinePlus

    X-ray - joint; Arthrography; Arthrogram ... x-ray technologist will help you position the joint to be x-rayed on the table. Once in place, pictures are taken. The joint may be moved into other positions for more ...

  20. Does a narrow tetraquark /ccūd¯ state exist?

    NASA Astrophysics Data System (ADS)

    Gelman, Boris A.; Nussinov, Shmuel

    2003-01-01

    The existence of a shallow or virtual tetraquark state, ccūd¯, is discussed. Using the putative masses for the doubly charmed baryons (ccu/ccd) from SELEX, the mass of the ccūd¯ state is estimated to be about 3.9 GeV, only slightly above the DD∗ threshold. The experimental signatures for various ccūd¯ masses are also discussed.

  1. Broadband inversion of 1J(CC) responses in 1,n-ADEQUATE spectra.

    PubMed

    Reibarkh, Mikhail; Williamson, R Thomas; Martin, Gary E; Bermel, Wolfgang

    2013-11-01

    Establishing the carbon skeleton of a molecule greatly facilitates the process of structure elucidation, both manual and computer-assisted. Recent advances in the family of ADEQUATE experiments demonstrated their potential in this regard. 1,1-ADEQUATE, which provides direct (13)C-(13)C correlation via (1)J(CC), and 1,n-ADEQUATE, which typically yields (3)J(CC) and (1)J(CC) correlations, are more sensitive and more widely applicable experiments than INADEQUATE and PANACEA. A recently reported modified pulse sequence that semi-selectively inverts (1)J(CC) correlations in 1,n-ADEQUATE spectra provided a significant improvement, allowing (1)J(CC) and (n)J(CC) correlations to be discerned in the same spectrum. However, the reported experiment requires a careful matching of the amplitude transfer function with (1)J(CC) coupling constants in order to achieve the inversion, and even then some (1)J(CC) correlations could still have positive intensity due to the oscillatory nature of the transfer function. Both shortcomings limit the practicality of the method. We now report a new, dual-optimized inverted (1)J(CC) 1,n-ADEQUATE experiment, which provides more uniform inversion of (1)J(CC) correlations across the range of 29-82 Hz. Unlike the original method, the dual optimization experiment does not require fine-tuning for the molecule's (1)J(CC) coupling constant values. Even more usefully, the dual-optimized version provides up to two-fold improvement in signal-to-noise for some long-range correlations. Using modern, cryogenically-cooled probes, the experiment can be successfully applied to samples of ~1 mg under favorable circumstances. The improvements afforded by dual optimization inverted (1)J(CC) 1,n-ADEQUATE experiment make it a useful and practical tool for NMR structure elucidation and should facilitate the implementation and utilization of the experiment.

  2. Role of platelet-derived growth factor-CC in capillary rarefaction in renal fibrosis.

    PubMed

    Boor, Peter; Bábíčková, Janka; Steegh, Floor; Hautvast, Petra; Martin, Ina V; Djudjaj, Sonja; Nakagawa, Taizo; Ehling, Josef; Gremse, Felix; Bücher, Eva; Eriksson, Ulf; van Roeyen, Claudia R C; Eitner, Frank; Lammers, Twan; Floege, Jürgen; Peutz-Kootstra, Carine J; Ostendorf, Tammo

    2015-08-01

    We have identified platelet-derived growth factor (PDGF)-CC as a potent profibrotic mediator in kidney fibrosis and pro-angiogenic mediator in glomeruli. Because renal fibrosis is associated with progressive capillary rarefaction, we asked whether PDGF-CC neutralization in fibrosis might have detrimental anti-angiogenic effects leading to aggravated peritubular capillary loss. We analyzed capillary rarefaction in mice with and without PDGF-CC neutralization (using genetically deficient mice and neutralizing antibodies), in three different models of renal interstitial fibrosis, unilateral ureteral obstruction, unilateral ischemia-reperfusion, Col4a3-deficient (Alport) mice, and healthy animals. Independent of the effect of PDGF-CC neutralization on renal fibrosis, we found no difference in capillary rarefaction between PDGF-CC-neutralized mice and mice with intact PDGF-CC. We also found no differences in microvascular leakage (determined by extravasation of Evans Blue Dye) and in renal relative blood volume quantified using in vivo microcomputed tomography. PDGF-CC neutralization had no effects on renal microvasculature in healthy animals. Capillary endothelium did not express PDGF receptor-α, suggesting that potential PDGF-CC effects would have to be indirect. PDGF-CC neutralization or deficiency was not associated with preservation or accelerated loss of peritubular capillaries, suggesting no significant pro-angiogenic effects of PDGF-CC during renal fibrosis. From a clinical perspective, the profibrotic effects of PDGF-CC outweigh the pro-angiogenic effects and, thus, do not limit a potential therapeutic use of PDGF-CC inhibition in renal fibrosis.

  3. NONLINEAR DIAGNOSTICS USING AC DIPOLES.

    SciTech Connect

    PEGGS,S.

    1999-03-29

    There are three goals in the accurate nonlinear diagnosis of a storage ring. First, the beam must be moved to amplitudes many times the natural beam size. Second, strong and long lasting signals must be generated. Third, the measurement technique should be non-destructive. Conventionally, a single turn kick moves the beam to large amplitudes, and turn-by-turn data are recorded from multiple beam position monitors (BPMs) [1-6]. Unfortunately, tune spread across the beam causes the center of charge beam signal to ''decohere'' on a time scale often less than 100 turns. Filamentation also permanently destroys the beam emittance (in a hadron ring). Thus, the ''strong single turn kick'' technique successfully achieves only one out of the three goals. AC dipole techniques can achieve all three. Adiabatically excited AC dipoles slowly move the beam out to large amplitudes. The coherent signals then recorded last arbitrarily long. The beam maintains its original emittance if the AC dipoles are also turned off adiabatically, ready for further use. The AGS already uses an RF dipole to accelerate polarized proton beams through depolarizing resonances with minimal polarization loss [7]. Similar AC dipoles will be installed in the horizontal and vertical planes of both rings in RHIC [8]. The RHIC AC dipoles will also be used as spin flippers, and to measure linear optical functions [9].

  4. Expression and regulation of RB1CC1 in developing murine and human tissues.

    PubMed

    Bamba, Noriko; Chano, Tokuhiro; Taga, Takashi; Ohta, Shigeru; Takeuchi, Yoshihiro; Okabe, Hidetoshi

    2004-10-01

    RB1-inducible coiled-coil 1 (RB1CC1) is a novel molecule implicated in the regulation of RB1 (retinoblastoma 1) expression. However, information about the RB1CC1 gene is limited and its function remains somewhat obscure. The present study analyzes the expression and promoter activities of RB1CC1 in developing murine and human tissues. Rb1cc1 was abundantly expressed from an early stage of the mouse embryo throughout development. Immunohistochemical analyses revealed that Rb1cc1 was ubiquitous in the mouse, rather than in the human embryo, especially in the musculoskeletal system, heart and neural tissues. Promoter activity was highest in a region located about 300 bp immediately upstream of exon 1 in both the mouse and human RB1CC1 genes, suggesting that this region is a core promoter. The promoter activity of RB1CC1 was generally higher in mice than in humans, and suppressive with intron 1, especially in humans. These results suggested that more Rb1cc1 is expressed throughout developing murine than in human tissues, and that RB1CC1 expression is controlled more stringently by modification at intron 1 in humans than in mice.

  5. Immunological role of C4 CC chemokine-1 from snakehead murrel Channa striatus.

    PubMed

    Bhatt, Prasanth; Kumaresan, Venkatesh; Palanisamy, Rajesh; Chaurasia, Mukesh Kumar; Gnanam, Annie J; Pasupuleti, Mukesh; Arockiaraj, Jesu

    2014-02-01

    In this study, we have reported a cDNA sequence of C4 CC chemokine identified from snakehead murrel (also known as striped murrel) Channa striatus (named as CsCC-Chem-1) normalized cDNA library constructed by Genome Sequencing FLX™ Technology (GS-FLX™). CsCC-Chem-1 is 641 base pairs (bp) long that contain 438 bp open reading frame (ORF). The ORF encodes a polypeptide of 146 amino acids with a molecular mass of 15 kDa. The polypeptide contains a small cytokine domain at 30-88. The domain carries the CC motif at Cys(33)-Cys(34). In addition, CsCC-Chem-1 consists of another two cysteine residues at C(59) and C(73), which, together with C(33) and C(34), make CsCC-Chem-1 as a C4-CC chemokine. CsCC-Chem-1 also contains a 'TCCT' motif at 32-35 as CC signature motif; this new motif may represent new characteristic features, which may lead to some unknown function that needs to be further focused on. Phylogenitically, CsCC-Chem-1 clustered together with CC-Chem-1 from rock bream Oplegnathus fasciatus and European sea bass Dicentrarchus labrax. Significantly (P<0.05) highest gene expression was noticed in spleen and is up-regulated upon fungus (Aphanomyces invadans), bacteria (Aeromonas hydrophila) and virus (poly I:C) infection at various time points. The gene expression results indicate the influence of CsCC-Chem-1 in the immune system of murrel. Overall, the gene expression study showed that the CsCC-Chem-1 is a capable gene to increase the cellular response against various microbial infections. Further, we cloned the coding sequence of CsCC-Chem-1 in pMAL vector and purified the recombinant protein to study the functional properties. The cell proliferation activity of recombinant CsCC-Chem-1 protein showed a significant metabolic activity in a concentration dependent manner. Moreover, the chemotaxis assay showed the capability of recombinant CsCC-Chem-1 protein which can induce the migration of spleen leukocytes in C. striatus. However, this remains to be verified

  6. Spacesuit mobility knee joints

    NASA Technical Reports Server (NTRS)

    Vykukal, H. C. (Inventor)

    1979-01-01

    Pressure suit mobility joints are for use in interconnecting adjacent segments of an hermetically sealed spacesuit in which low torques, low leakage and a high degree of reliability are required. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics and includes linkages which restrain the joint from longitudinal distension and includes a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

  7. Spacesuit mobility joints

    NASA Technical Reports Server (NTRS)

    Vykukal, H. C. (Inventor)

    1978-01-01

    Joints for use in interconnecting adjacent segments of an hermetically sealed spacesuit which have low torques, low leakage and a high degree of reliability are described. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics. Linkages which restrain the joint from longitudinal distension and a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli are featured. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

  8. JMS Proxy and C/C++ Client SDK

    NASA Technical Reports Server (NTRS)

    Wolgast, Paul; Pechkam, Paul

    2007-01-01

    JMS Proxy and C/C++ Client SDK (JMS signifies "Java messaging service" and "SDK" signifies "software development kit") is a software package for developing interfaces that enable legacy programs (here denoted "clients") written in the C and C++ languages to communicate with each other via a JMS broker. This package consists of two main components: the JMS proxy server component and the client C library SDK component. The JMS proxy server component implements a native Java process that receives and responds to requests from clients. This component can run on any computer that supports Java and a JMS client. The client C library SDK component is used to develop a JMS client program running in each affected C or C++ environment, without need for running a Java virtual machine in the affected computer. A C client program developed by use of this SDK has most of the quality-of-service characteristics of standard Java-based client programs, including the following: Durable subscriptions; Asynchronous message receipt; Such standard JMS message qualities as "TimeToLive," "Message Properties," and "DeliveryMode" (as the quoted terms are defined in previously published JMS documentation); and Automatic reconnection of a JMS proxy to a restarted JMS broker.

  9. D0 CC Cryostat Test Cooldown - Cooldown Time

    SciTech Connect

    Fuerst, J.D.; /Fermilab

    1987-08-19

    The D0 CC Cryostat is to be cold tested with LN{sub 2}. Calculations show that the time required for the 12.5 ton stainless steel inner vessel to reach equilibrium is around 5 hours if the vessel is cooled by introducing liquid into a nozzle at the bottom. The heat transfer calculations contain many assumptions. As a result, the vessel will be cooled by spraying LN{sub 2} through a nozzle at the vessel top, providing as fast a cooldown as desired. Although calculations of the bottom-fill cooldown method indicate a reasonable cooldown time, the assumption of uniform gas temperature (absence of stratification) is vital to the analysis and in fast may not be valid. Initially, as liquid is introduced into the bottom of the vessel, it will boil rapidly creating large amounts of cold gas which then cool the walls above. As the vessel bottom cools and LN{sub 2} begins to pool, however, the boiloff rate could decrease significantly. Thus the cold gas assumed in the free convection calculations is not generated. For this reason and in the interest of a speedy cooldown it has been decided to fill the vessel by spraying LN{sub 2} in through a nozzle in the vessel top.

  10. Application of Aquaculture Monitoring System Based on CC2530

    NASA Astrophysics Data System (ADS)

    Chen, H. L.; Liu, X. Q.

    In order to improve the intelligent level of aquaculture technology, this paper puts forward a remote wireless monitoring system based on ZigBee technology, GPRS technology and Android mobile phone platform. The system is composed of wireless sensor network (WSN), GPRS module, PC server, and Android client. The WSN was set up by CC2530 chips based on ZigBee protocol, to realize the collection of water quality parameters such as the water level, temperature, PH and dissolved oxygen. The GPRS module realizes remote communication between WSN and PC server. Android client communicates with server to monitor the level of water quality. The PID (proportion, integration, differentiation) control is adopted in the control part, the control commands from the android mobile phone is sent to the server, the server again send it to the lower machine to control the water level regulating valve and increasing oxygen pump. After practical testing to the system in Liyang, Jiangsu province, China, temperature measurement accuracy reaches 0.5°C, PH measurement accuracy reaches 0.3, water level control precision can be controlled within ± 3cm, dissolved oxygen control precision can be controlled within ±0.3 mg/L, all the indexes can meet the requirements, this system is very suitable for aquaculture.

  11. Exposure to bloom-like concentrations of two marine Synechococcus cyanobacteria (strains CC9311 and CC9902) differentially alters fish behaviour.

    PubMed

    Hamilton, T J; Paz-Yepes, J; Morrison, R A; Palenik, B; Tresguerres, M

    2014-01-01

    Coastal California experiences large-scale blooms of Synechococcus cyanobacteria, which are predicted to become more prevalent by the end of the 21st century as a result of global climate change. This study investigated whether exposure to bloom-like concentrations of two Synechococcus strains, CC9311 and CC9902, alters fish behaviour. Black perch (Embiotoca jacksoni) were exposed to Synechococcus strain CC9311 or CC9902 (1.5 × 10(6) cells ml(-1)) or to control seawater in experimental aquaria for 3 days. Fish movement inside a testing arena was then recorded and analysed using video camera-based motion-tracking software. Compared with control fish, fish exposed to CC9311 demonstrated a significant preference for the dark zone of the tank in the light-dark test, which is an indication of increased anxiety. Furthermore, fish exposed to CC9311 also had a statistically significant decrease in velocity and increase in immobility and they meandered more in comparison to control fish. There was a similar trend in velocity, immobility and meandering in fish exposed to CC9902, but there were no significant differences in behaviour or locomotion between this group and control fish. Identical results were obtained with a second batch of fish. Additionally, in this second trial we also investigated whether fish would recover after a 3 day period in seawater without cyanobacteria. Indeed, there were no longer any significant differences in behaviour among treatments, demonstrating that the sp. CC9311-induced alteration of behaviour is reversible. These results demonstrate that blooms of specific marine Synechococcus strains can induce differential sublethal effects in fish, namely alterations light-dark preference behaviour and motility.

  12. Exposure to bloom-like concentrations of two marine Synechococcus cyanobacteria (strains CC9311 and CC9902) differentially alters fish behaviour

    PubMed Central

    Hamilton, T. J.; Paz-Yepes, J.; Morrison, R. A.; Palenik, B.; Tresguerres, M.

    2014-01-01

    Coastal California experiences large-scale blooms of Synechococcus cyanobacteria, which are predicted to become more prevalent by the end of the 21st century as a result of global climate change. This study investigated whether exposure to bloom-like concentrations of two Synechococcus strains, CC9311 and CC9902, alters fish behaviour. Black perch (Embiotoca jacksoni) were exposed to Synechococcus strain CC9311 or CC9902 (1.5 × 106 cells ml−1) or to control seawater in experimental aquaria for 3 days. Fish movement inside a testing arena was then recorded and analysed using video camera-based motion-tracking software. Compared with control fish, fish exposed to CC9311 demonstrated a significant preference for the dark zone of the tank in the light–dark test, which is an indication of increased anxiety. Furthermore, fish exposed to CC9311 also had a statistically significant decrease in velocity and increase in immobility and they meandered more in comparison to control fish. There was a similar trend in velocity, immobility and meandering in fish exposed to CC9902, but there were no significant differences in behaviour or locomotion between this group and control fish. Identical results were obtained with a second batch of fish. Additionally, in this second trial we also investigated whether fish would recover after a 3 day period in seawater without cyanobacteria. Indeed, there were no longer any significant differences in behaviour among treatments, demonstrating that the sp. CC9311-induced alteration of behaviour is reversible. These results demonstrate that blooms of specific marine Synechococcus strains can induce differential sublethal effects in fish, namely alterations light–dark preference behaviour and motility. PMID:27293641

  13. Ac-loss measurement of a DyBCO-Roebel assembled coated conductor cable (RACC)

    NASA Astrophysics Data System (ADS)

    Schuller, S.; Goldacker, W.; Kling, A.; Krempasky, L.; Schmidt, C.

    2007-10-01

    Low ac-loss HTS cables for transport currents well above 1 kA are required for application in transformers and generators and are taken into consideration for future generations of fusion reactor coils. Coated conductors (CC) are suitable candidates for high field application at an operation temperature around 50-77 K, which is a crucial precondition for economical cooling costs. We prepared a short length of a Roebel bar cable made of industrial DyBCO coated conductor (Theva Company, Germany). Meander shaped tapes of 4 mm width with a twist pitch of 122 mm were cut from 10 mm wide CC tapes using a specially designed tool. Eleven of these strands were assembled to a cable. The electrical and mechanical connection of the tapes was achieved using a silver powder filled conductive epoxy resin. Ac-losses of a short sample in an external ac field were measured as a function of frequency and field amplitude in transverse and parallel field orientations. In addition, the coupling current time constant of the sample was directly measured.

  14. Pursuing low joint resistivity in Cu-stabilized REBa2Cu3O δ coated conductor tapes by the ultrasonic weld-solder hybrid method

    NASA Astrophysics Data System (ADS)

    Shin, Hyung-Seop; Kim, Jong-min; Dedicatoria, Marlon J.

    2016-01-01

    Development of a coated conductor tape joint with good quality and low joint resistivity, R sj, in terms of transport and mechanical properties, was attempted by direct bonding at the interface of the Cu-Cu stabilizers in overlapped GdBCO CC tapes. In this study, we attempted to achieve a low R sj by introducing hybrid joining, soldering and ultrasonic welding (UW), and its mechanism was analyzed theoretically. Coated conductor tapes were experimentally joined using various methods of soldering, UW, and combinations of the two. As a result, a much lower R sj of about 57 nΩ · cm2 was obtained for RCE-DR-processed GdBCO CC tape joints using the hybrid joining method. The mechanical properties of the jointed CC tapes were also evaluated at room temperature and 77 K under self-field. Load-displacement curves of joined CC tapes followed the curve of the single CC tape. Critical current and joint resistance, R j, of hybrid-joined CC tape were retained after double bending at room temperature up to 20 mm bending diameter.

  15. 76 FR 44800 - Election of Reduced Research Credit Under Section 280C(c)(3)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-27

    ... [TD 9539] RIN 1545-BI09 Election of Reduced Research Credit Under Section 280C(c)(3) AGENCY: Internal... dates of applicability, see Sec. 1.280C- 4(c). FOR FURTHER INFORMATION CONTACT: David Selig, (202) 622... research credit under section 280C(c)(3). On July 16, 2009, a notice of proposed rulemaking...

  16. Inhibition of Btk with CC-292 provides early pharmacodynamic assessment of activity in mice and humans.

    PubMed

    Evans, Erica K; Tester, Richland; Aslanian, Sharon; Karp, Russell; Sheets, Michael; Labenski, Matthew T; Witowski, Steven R; Lounsbury, Heather; Chaturvedi, Prasoon; Mazdiyasni, Hormoz; Zhu, Zhendong; Nacht, Mariana; Freed, Martin I; Petter, Russell C; Dubrovskiy, Alex; Singh, Juswinder; Westlin, William F

    2013-08-01

    Targeted therapies that suppress B cell receptor (BCR) signaling have emerged as promising agents in autoimmune disease and B cell malignancies. Bruton's tyrosine kinase (Btk) plays a crucial role in B cell development and activation through the BCR signaling pathway and represents a new target for diseases characterized by inappropriate B cell activity. N-(3-(5-fluoro-2-(4-(2-methoxyethoxy)phenylamino)pyrimidin-4-ylamino)phenyl)acrylamide (CC-292) is a highly selective, covalent Btk inhibitor and a sensitive and quantitative assay that measures CC-292-Btk engagement has been developed. This translational pharmacodynamic assay has accompanied CC-292 through each step of drug discovery and development. These studies demonstrate the quantity of Btk bound by CC-292 correlates with the efficacy of CC-292 in vitro and in the collagen-induced arthritis model of autoimmune disease. Recently, CC-292 has entered human clinical trials with a trial design that has provided rapid insight into safety, pharmacokinetics, and pharmacodynamics. This first-in-human healthy volunteer trial has demonstrated that a single oral dose of 2 mg/kg CC-292 consistently engaged all circulating Btk protein and provides the basis for rational dose selection in future clinical trials. This targeted covalent drug design approach has enabled the discovery and early clinical development of CC-292 and has provided support for Btk as a valuable drug target for B-cell mediated disorders.

  17. Choosing the Right CC Welding Unit: Student Success Depends on It

    ERIC Educational Resources Information Center

    Borchert, Neal

    2008-01-01

    Understanding the personality of a constant current (CC) dc welding machine can make the difference between a successful or unsuccessful weld test or between a student who pursues a career in welding and one who may quit in frustration. In this article, the author explains the two different "personalities" of CC welders. He also explains how…

  18. ACS from development to operations

    NASA Astrophysics Data System (ADS)

    Caproni, Alessandro; Colomer, Pau; Jeram, Bogdan; Sommer, Heiko; Chiozzi, Gianluca; Mañas, Miguel M.

    2016-08-01

    The ALMA Common Software (ACS), provides the infrastructure of the distributed software system of ALMA and other projects. ACS, built on top of CORBA and Data Distribution Service (DDS) middleware, is based on a Component- Container paradigm and hides the complexity of the middleware allowing the developer to focus on domain specific issues. The transition of the ALMA observatory from construction to operations brings with it that ACS effort focuses primarily on scalability, stability and robustness rather than on new features. The transition came together with a shorter release cycle and a more extensive testing. For scalability, the most problematic area has been the CORBA notification service, used to implement the publisher subscriber pattern because of the asynchronous nature of the paradigm: a lot of effort has been spent to improve its stability and recovery from run time errors. The original bulk data mechanism, implemented using the CORBA Audio/Video Streaming Service, showed its limitations and has been replaced with a more performant and scalable DDS implementation. Operational needs showed soon the difference between releases cycles for Online software (i.e. used during observations) and Offline software, which requires much more frequent releases. This paper attempts to describe the impact the transition from construction to operations had on ACS, the solution adopted so far and a look into future evolution.

  19. Simple Equipment for Imaging AC.

    ERIC Educational Resources Information Center

    Kamata, Masahiro; Anayama, Takayuki

    2003-01-01

    Presents an effective way to demonstrate the difference between direct current and alternating current using red and green LEDs. Describes how to make a tool that shows how an AC voltage changes with time using the afterimage effect of the LEDs. (Author/NB)

  20. Etching of porous and solid SiO2 in Ar /c-C4F8, O2/c-C4F8 and Ar /O2/c-C4F8 plasmas

    NASA Astrophysics Data System (ADS)

    Sankaran, Arvind; Kushner, Mark J.

    2005-01-01

    C-C4F8-based plasmas are used for selective etching of high aspect ratio (HAR) trenches in SiO2 and other dielectrics for microelectronics fabrication. Additives such as Ar and O2 are often used to optimize the process. Understanding the fundamentals of these processes is critical to extending technologies developed for solid SiO2 to porous SiO2, as used in low-dielectric constant insulators. To investigate these issues, reaction mechanisms developed for etching of solid and porous SiO2 in fluorocarbon plasmas and for etching of organic polymers in O2 plasmas have been incorporated into a feature profile model capable of addressing two-phase porous materials. The reaction mechanism was validated by comparison to experiments for blanket etching of solid and porous SiO2 in Ar /c-C4F8 and O2/c-C4F8 plasmas using inductively coupled plasma reactors. We found that the blanket etch rates of both solid and porous SiO2 had maxima as a function of Ar and O2 addition to c-C4F8 at mole fractions corresponding to an optimum thickness of the overlying polymer layer. Larger Ar and O2 additions were required to optimize the etch rate for porous SiO2. Whereas etch stops occurred during etching of HAR features in solid and porous SiO2 using pure c-C4F8 plasmas, Ar and O2 addition facilitated etching by reducing the polymer thickness, though with some loss of critical dimensions. Mixtures of Ar /O2/c-C4F8 can be used to manage this tradeoff.

  1. Structural insights into the interaction between a potent anti-inflammatory protein, viral CC chemokine inhibitor (vCCI), and the human CC chemokine, Eotaxin-1.

    PubMed

    Kuo, Nai-Wei; Gao, Yong-Guang; Schill, Megan S; Isern, Nancy; Dupureur, Cynthia M; Liwang, Patricia J

    2014-03-07

    Chemokines play important roles in the immune system, not only recruiting leukocytes to the site of infection and inflammation but also guiding cell homing and cell development. The soluble poxvirus-encoded protein viral CC chemokine inhibitor (vCCI), a CC chemokine inhibitor, can bind to human CC chemokines tightly to impair the host immune defense. This protein has no known homologs in eukaryotes and may represent a potent method to stop inflammation. Previously, our structure of the vCCI·MIP-1β (macrophage inflammatory protein-1β) complex indicated that vCCI uses negatively charged residues in β-sheet II to interact with positively charged residues in the MIP-1β N terminus, 20s region and 40s loop. However, the interactions between vCCI and other CC chemokines have not yet been fully explored. Here, we used NMR and fluorescence anisotropy to study the interaction between vCCI and eotaxin-1 (CCL11), a CC chemokine that is an important factor in the asthma response. NMR results reveal that the binding pattern is very similar to the vCCI·MIP-1β complex and suggest that electrostatic interactions provide a major contribution to binding. Fluorescence anisotropy results on variants of eotaxin-1 further confirm the critical roles of the charged residues in eotaxin-1. In addition, the binding affinity between vCCI and other wild type CC chemokines, MCP-1 (monocyte chemoattractant protein-1), MIP-1β, and RANTES (regulated on activation normal T cell expressed and secreted), were determined as 1.1, 1.2, and 0.22 nm, respectively. To our knowledge, this is the first work quantitatively measuring the binding affinity between vCCI and multiple CC chemokines.

  2. Energy Materials Coordinating Committee (EMaCC): Fiscal year 1996. Annual technical report

    SciTech Connect

    1997-08-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. The EMaCC reports to the Director of the Office of Energy Research in his or her capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1996 and describes the materials research programs of various offices and divisions within the Department.

  3. CC-122 immunomodulatory effects in refractory patients with diffuse large B-cell lymphoma.

    PubMed

    Cubillos-Zapata, Carolina; Cordoba, Raúl; Avendaño-Ortiz, José; Arribas-Jiménez, Cristina; Hernández-Jiménez, Enrique; Toledano, Víctor; Villaescusa, Teresa; Moreno, Víctor; López-Collazo, Eduardo

    2016-01-01

    In the three patients included in a phase I clinical trial (NCT01421524), we report the immunomodulatory effects and efficacy of CC-122, a novel pleiotropic pathway modifier compound originally developed for broad diffuse large B-cell lymphoma (DLBCL). The chemical structure of CC-122 includes the glutarimide moiety that is known to modulate the immune response. The immunomodulatory agents including lenalidomide represent a promising therapeutic strategy targeting tumors in B-cell lymphoid malignancies. We observed that CC-122 might regulate the NK phenotype and its activity due to the reduced accumulation of myeloid-derived suppressor cell and eventually decrease the Tregs subsets. Finally, the activation of T cells through co-stimulatory molecule (CD28) was detected as a delayed CC-122 effect. In this context, CC-122 arises as an alternative option for DLBCL patients refractory to the traditional chemotherapeutic agents.

  4. Photodissociation dynamics of cyclopropenylidene, c-C3 H2.

    PubMed

    Schuurman, Michael S; Giegerich, Jens; Pachner, Kai; Lang, Daniel; Kiendl, Benjamin; MacDonell, Ryan J; Krueger, Anke; Fischer, Ingo

    2015-10-05

    In this joint experimental and theoretical study we characterize the complete dynamical "life cycle" associated with the photoexcitation of the singlet carbene cyclopropenylidene to the lowest lying optically bright excited electronic state: from the initial creation of an excited-state wavepacket to the ultimate fragmentation of the molecule on the vibrationally hot ground electronic state. Cyclopropenylidene is prepared in this work using an improved synthetic pathway for the preparation of the precursor quadricyclane, thereby greatly simplifying the assignment of the molecular origin of the measured photofragments. The excitation process and subsequent non-adiabatic dynamics have been previously investigated employing time-resolved photoelectron spectroscopy and are now complemented with high-level ab initio trajectory simulations that elucidate the specific vibronic relaxation pathways. Lastly, the fragmentation channels accessed by the molecule following internal conversion are probed using velocity map imaging (VMI) so that the identity of the fragmentation products and their corresponding energy distributions can be definitively assigned.

  5. Optimized Bolted Joint

    NASA Technical Reports Server (NTRS)

    Hart-Smith, L. J.; Bunin, B. L.; Watts, D. J.

    1986-01-01

    Computer technique aids joint optimization. Load-sharing between fasteners in multirow bolted composite joints computed by nonlinear-analysis computer program. Input to analysis was load-deflection data from 180 specimens tested as part of program to develop technology of structural joints for advanced transport aircraft. Bolt design optimization technique applicable to major joints in composite materials for primary and secondary structures and generally applicable for metal joints as well.

  6. Design and Test of the CC Cryostat Head Cart

    SciTech Connect

    Jaques, Al; /Fermilab

    1989-08-08

    This Engineering Note documents the design of the stand to be used to transport the CC Cryostat heads into the D-Zero clean room. Due to the width of the clean room access door, the heads will have to be upright to fit through. This head cart will hold the heads upright and wheel them into the clean room on a guided track. Before the wheels are placed on the heat cart, it will be used as a stand to place the heads on for the purpose of test fitting the super insulation. The head cart will not only be structurally sufficient to support the weight of the heads but also stiff enough to allow a maximum deflection of 1/2-inch at the end of the 48-inch cylinder. The heaviest head assembly weighs about 9000 pounds. Following A.I.S.C. specifications and using a 9000 pound design load, the head cart was initially designed and built and later modified in order to meet the deflection requirements. Bending and tension stresses were limited to two thirds the yield strength. Weld and shear stresses are limited to 0.4*Fy. The C7 X 12.25 channels, the L2.5 X 2.5 X 0.25 angles adn the 1/2-inch plate are all A36 steel. In order to validate the need for an end plate in the 48-inch cylinder, an ANSYS model was created of the cylinder itself to determine it's rigidity under a point load applied at it's outer end. Appendix D contains the results which demonstrate the rigidity of the cylinder-end plate assembly. Also included is a Frame-Mac simulation of the head cart which was used to estimate the deflection at the cylinder end. A load test was performed to 133% of the rated capacity, or 12,000 pounds. The test load was incrementally applied using a crane and hook scale. A graph of deflection vs. load is shown in Appendix E. A spreader beam was designed and built to properly test the head cart. Stress calculations for this test spreader beam are included in Appendix C.

  7. Pharmacokinetics and Pharmacodynamics with Extended Dosing of CC-486 in Patients with Hematologic Malignancies

    PubMed Central

    Garcia-Manero, Guillermo; Cogle, Christopher R.; Gore, Steven D.; Hetzer, Joel; Kumar, Keshava; Skikne, Barry; MacBeth, Kyle J.

    2015-01-01

    CC-486 (oral azacitidine) is an epigenetic modifier in development for patients with myelodysplastic syndromes and acute myeloid leukemia. In part 1 of this two-part study, a 7-day CC-486 dosing schedule showed clinical activity, was generally well tolerated, and reduced DNA methylation. Extending dosing of CC-486 beyond 7 days would increase duration of azacitidine exposure. We hypothesized that extended dosing would therefore provide more sustained epigenetic activity. Reported here are the pharmacokinetic (PK) and pharmacodynamic (PD) profiles of CC-486 extended dosing schedules in patients with myelodysplastic syndromes (MDS), chronic myelomonocytic leukemia (CMML) or acute myeloid leukemia (AML) from part 2 of this study. PK and/or PD data were available for 59 patients who were sequentially assigned to 1 of 4 extended CC-486 dosing schedules: 300mg once-daily or 200mg twice-daily for 14 or 21 days per 28-day cycle. Both 300mg once-daily schedules and the 200mg twice-daily 21-day schedule significantly (all P < .05) reduced global DNA methylation in whole blood at all measured time points (days 15, 22, and 28 of the treatment cycle), with sustained hypomethylation at cycle end compared with baseline. CC-486 exposures and reduced DNA methylation were significantly correlated. Patients who had a hematologic response had significantly greater methylation reductions than non-responding patients. These data demonstrate that extended dosing of CC-486 sustains epigenetic effects through the treatment cycle. Trial Registration ClinicalTrials.gov NCT00528983 PMID:26296092

  8. RB1CC1 protein suppresses type II collagen synthesis in chondrocytes and causes dwarfism.

    PubMed

    Nishimura, Ichiro; Chano, Tokuhiro; Kita, Hiroko; Matsusue, Yoshitaka; Okabe, Hidetoshi

    2011-12-23

    RB1-inducible coiled-coil 1 (RB1CC1) functions in various processes, such as cell growth, differentiation, senescence, apoptosis, and autophagy. The conditional transgenic mice with cartilage-specific RB1CC1 excess that were used in the present study were made for the first time by the Cre-loxP system. Cartilage-specific RB1CC1 excess caused dwarfism in mice without causing obvious abnormalities in endochondral ossification and subsequent skeletal development from embryo to adult. In vitro and in vivo analysis revealed that the dwarf phenotype in cartilaginous RB1CC1 excess was induced by reductions in the total amount of cartilage and the number of cartilaginous cells, following suppressions of type II collagen synthesis and Erk1/2 signals. In addition, we have demonstrated that two kinds of SNPs (T-547C and C-468T) in the human RB1CC1 promoter have significant influence on the self-transcriptional level. Accordingly, human genotypic variants of RB1CC1 that either stimulate or inhibit RB1CC1 transcription in vivo may cause body size variations.

  9. Carotid stenosis evaluation by 64-slice CTA: comparison of NASCET, ECST and CC grading methods.

    PubMed

    Kılıçkap, Gülsüm; Ergun, Elif; Başbay, Elif; Koşar, Pınar; Kosar, Uğur

    2012-06-01

    Purpose is to evaluate the intraobserver and interobserver variability of the North American Symptomatic Carotid Endarterectomy Trial (NASCET), European Carotid Surgery Trial (ECST) and Common Carotid (CC) methods, which are used to measure the degree of ICA stenosis, using 64-slice CT angiography and to compare the measurements made by these three methods. 88 cases (111 carotid arteries) were included in the study. Carotid CTA was performed by a 64 slice scanner (Toshiba, Aqullion 64).Two radiologists measured the degree of carotid stenosis by using NASCET, ECST and CC methods. Intraobserver and interobserver variability of each method was determined by intraclass correlation coefficient (ICC), Bland-Altman plots and kappa and linear weighted kappa statistics. The relation between the measurements was assessed by correlation coefficient (with linear and quadratic methods). Correlation coefficients showed that there is linear correlation between the measurements made by the three methods. The degree of stenosis measured with the NASCET method had the lowest value, while the corresponding values measured with the ECST and CC methods were close to each other. ICC and Bland-Altman plots showed high intra and inter observer agreement for NASCET, ECST and CC methods whereas kappa statistics showed moderate to substantial agreement. CC method had slightly higher agreement when compared with the other two methods. Intra and interobserver agreement is high for NASCET, ECST and CC methods however CC method has a slightly higher reproducibility. There is linear correlation between the measurements made by the three methods.

  10. Vasoprotective effect of PDGF-CC mediated by HMOX1 rescues retinal degeneration.

    PubMed

    He, Chang; Zhao, Chen; Kumar, Anil; Lee, Chunsik; Chen, Mingquan; Huang, Lijuan; Wang, Jing; Ren, Xiangrong; Jiang, Yida; Chen, Wei; Wang, Bin; Gao, Zhiqin; Zhong, Zheng; Huang, Zijing; Zhang, Fan; Huang, Bing; Ding, Hao; Ju, Rong; Tang, Zhongshu; Liu, Yizhi; Cao, Yihai; Li, Xuri; Liu, Xialin

    2014-10-14

    Blood vessel degeneration is critically involved in nearly all types of degenerative diseases. Therefore strategies to enhance blood vessel protection and survival are highly needed. In this study, using different animal models and cultured cells, we show that PDGF-CC is a potent vascular protective and survival factor. PDGF-CC deficiency by genetic deletion exacerbated blood vessel regression/degeneration in various animal models. Importantly, treatment with PDGF-CC protein not only increased the survival of retinal blood vessels in a model of oxygen-induced blood vessel regression but also markedly rescued retinal and blood vessel degeneration in a disease model of retinitis pigmentosa. Mechanistically, we revealed that heme oxygenase-1 (HMOX1) activity is critically required for the vascular protective/survival effect of PDGF-CC, because blockade of HMOX1 completely abolished the protective effect of PDGF-CC in vitro and in vivo. We further found that both PDGF receptors, PDGFR-β and PDGFR-α, are required for the vasoprotective effect of PDGF-CC. Thus our data show that PDGF-CC plays a pivotal role in maintaining blood vessel survival and may be of therapeutic value in treating various types of degenerative diseases.

  11. CC10 reduces inflammation in meconium aspiration syndrome in newborn piglets.

    PubMed

    Angert, Robert M; Pilon, Aprile L; Chester, Darrin; Davis, Jonathan M

    2007-12-01

    Complications from meconium aspiration syndrome (MAS) remain significant despite a variety of therapeutic interventions. Clara cell protein (CC10) is a novel anti-inflammatory agent that can also inhibit phospholipase A2 (PLA2) (an important component of meconium). The present study examined whether administration of recombinant human CC10 (rhCC10) would reduce inflammation and improve lung function in a piglet model of MAS. Following meconium instillation, piglets exhibited significant physiologic dysfunction that improved significantly after surfactant administration. Analysis of tracheal aspirates revealed significant increases in both tumor necrosis factor (TNF) alpha and interleukin (IL)-8 after meconium instillation. rhCC10-treated animals had significantly lower TNF-alpha levels at 24 h (561 +/- 321 versus 1357 +/- 675 pg/mL, p < 0.05) compared with saline controls. There were no differences between rhCC10-treated and untreated groups with respect to other measured physiologic variables or inflammatory markers, including secretory PLA2 activity. Histologic analyses revealed marked inflammatory infiltrates and thickened alveolar walls, but no significant differences among rhCC10 and control animals. Newborn piglets with MAS have significant physiologic dysfunction, marked inflammatory changes and histologic abnormalities, which was partially counteracted by a single dose of exogenous surfactant and rhCC10.

  12. ac-resistance-measuring instrument

    SciTech Connect

    Hof, P.J.

    1981-04-22

    An auto-ranging ac resistance measuring instrument for remote measurement of the resistance of an electrical device or circuit connected to the instrument includes a signal generator which generates an ac excitation signal for application to a load, including the device and the transmission line, a monitoring circuit which provides a digitally encoded signal representing the voltage across the load, and a microprocessor which operates under program control to provide an auto-ranging function by which range resistance is connected in circuit with the load to limit the load voltage to an acceptable range for the instrument, and an auto-compensating function by which compensating capacitance is connected in shunt with the range resistance to compensate for the effects of line capacitance.

  13. The MRI geyser sign: acromioclavicular joint cysts in the setting of a chronic rotator cuff tear.

    PubMed

    Cooper, H John; Milillo, Ralph; Klein, Devon A; DiFelice, Gregory S

    2011-06-01

    We present the case of a 71-year-old man with a large acromioclavicular (AC) joint cyst successfully managed with surgical excision. AC joint cysts are soft tissue masses generally signifying underlying rotator cuff pathology. Traditionally, these cysts were identified with shoulder arthrography as a "geyser" of fluid escaping through the AC joint. Magnetic resonance imaging (MRI) is today's preferred imaging modality; we describe the MRI equivalent of the "geyser sign," signifying synovial fluid escaping through the cuff defect, across the subacromial bursa, and decompressing superiorly through a degenerated AC joint. Surgical management is preferred for symptomatic cysts. Based on a review of limited retrospective case series, recommendations for management of these lesions are as follows. Repair of the rotator cuff is preferable whenever possible. In the case of an irreparable defect, good results can be achieved through excisional AC joint arthroplasty and resection of the cyst base. Aspiration of these cysts should not be attempted, due to the high recurrence rate and potential for a draining sinus. Hemiarthroplasty also may be effective in indirectly decompressing these cysts; but given the invasive nature of this procedure, it should be reserved for patients who are also symptomatic from cuff arthropathy.

  14. Structural Insights into the Interaction Between a Potent Anti-Inflammatory Protein, Viral CC Chemokine Inhibitor (vCCI), and the Human CC Chemokine, Eotaxin-1

    SciTech Connect

    Kuo, Nai-Wei; Gao, Yong; Schill, Megan S.; Isern, Nancy G.; Dupureur, Cynthia M.; Liwang, Patricia J.

    2014-01-30

    Chemokines play important roles in the immune system, not only recruiting leukocytes to the site of infection and inflammation but also guiding cell homing and cell development. The soluble poxvirusencoded protein vCCI, a CC chemokine inhibitor, can bind to human CC chemokines tightly to impair the host immune defense. This protein has no known homologs in eukaryotes, and may represent a potent method to stop inflammation. Previously, our structure of the vCCI:MIP-1β complex indicated that vCCI uses negatively charged residues in β-sheet II to interact with positively charged residues in the MIP-1βN-terminus, 20’s region and 40’s loop. However, the interactions between vCCI and other CC chemokines have not yet been fully explored. Here, we used NMR and fluorescence anisotropy to study the interaction between vCCI and eotaxin-1 (CCL11), another CC chemokine that is an important factor in the asthma response. NMR results reveal that the binding pattern is very similar to the vCCI:MIP-1βcomplex, and suggest that electrostatic interactions provide a major contribution to binding. Fluorescence anisotropy results on variants of eotaxin-1 further confirm the critical roles of the charged residues in eotaxin. Compared to wild-type eotaxin, single, double, or triple mutations at these critical charged residues weaken the binding. One exception is the K47A mutation that exhibits increased affinity for vCCI, which can be explained structurally. In addition, the binding affinity between vCCI and other wild type CC chemokines, MCP-1, MIP-1β and RANTES, were determined as 1.09 nM, 1.16 nM, and 0.22 nM, respectively. To our knowledge, this is the first work quantitatively measuring the binding affinity between vCCI and different CC chemokines.

  15. Exposure-response analysis to assess the concentration–QTc relationship of CC-122

    PubMed Central

    Li, Yan; Carayannopoulos, Leonidas N; Thomas, Michael; Palmisano, Maria; Zhou, Simon

    2016-01-01

    CC-122 hydrochloride is a novel pleiotropic pathway modifier compound that binds cereblon, a substrate receptor of the Cullin 4 RING E3 ubiquitin ligase complex. CC-122 has multiple activities including modulation of immune cells, antiproliferative activity of multiple myeloma and lymphoma cells, and antiangiogenic activity. CC-122 is being developed as an oncology treatment for hematologic malignancies and advanced solid tumors. Cardiovascular and vital sign assessments of CC-122 have been conducted in hERG assays in vitro and in a 28-day good laboratory practice monkey study with negative signals. To assess the potential concentration–QTc relationship in humans and to ascertain or exclude a small QT effect by CC-122, a plasma concentration exposure- and ΔQTcF-response model of CC-122 was developed. Intensive CC-122 concentration and paired triplicate electrocardiogram data from a single ascending dose study were included in the analysis. The parameters included in the final linear exposure-response model are intercept, slope, and treatment effect. The slope estimate of 0.0201 with 90% CI of (0.009, 0.035) indicates a weak relationship between ΔQTcF and CC-122 concentration. The upper bounds of the 90% CI of the model-predicted ΔΔQTcF effect at Cmax from the 4 mg clinical dose and the supratherapeutic dose of 15 mg (1.18 ms and 8.76 ms, respectively) are <10 ms threshold, suggesting that the risk of CC-122 QT prolongation effect at the relevant therapeutic dose range from 1 mg to 4 mg is low. PMID:27672344

  16. The Coprinopsis cinerea septin Cc.Cdc3 is involved in stipe cell elongation.

    PubMed

    Shioya, Tatsuhiro; Nakamura, Hiroe; Ishii, Noriyoshi; Takahashi, Naoki; Sakamoto, Yuichi; Ozaki, Noriaki; Kobayashi, Masayuki; Okano, Keiju; Kamada, Takashi; Muraguchi, Hajime

    2013-01-01

    We have identified and characterized a Coprinopsis cinerea mutant defective in stipe elongation during fruiting body development. In the wild-type, stipe cells elongate at the maturation stage of fruiting, resulting in very slender cells. In the mutant, the stipe cells fail to elongate, but become rather globular at the maturation stage. We found that the mutant phenotype is rescued by a gene encoding a homolog of Saccharomyces cerevisiae CDC3 septin, Cc.Cdc3. The C. cinerea genome includes 6 septin genes, 5 of which, including Cc.cdc3, are highly transcribed during stipe elongation in the wild type. In the mutant, the level of Cc.cdc3 transcription in the stipe cells remains the same as that in the mycelium, and the level of Cc.cdc10 transcription is approximately 100 times lower than that in the wild-type stipe cells. No increase in transcription of Cc.cdc3 in the mutant may be due to the fact that the Cc.cdc3 gene has a 4-base pair insertion in its promoter and/or that the promoter region is methylated in the mutant. Overexpressed EGFP-Cc.Cdc3 fusion protein rescues the stipe elongation in the transformants, localizes to the cell cortex and assembles into abundant thin filaments in the elongating stipe cells. In contrast, in vegetative hyphae, EGFP-Cc.Cdc3 is localized to the hyphal tips of the apical cells of hyphae. Cellular defects in the mutant, combined with the localization of EGFP-Cc.Cdc3, suggest that septin filaments in the cell cortex provide the localized rigidity to the plasma membrane and allow cells to elongate cylindrically.

  17. Exposure-response analysis to assess the concentration-QTc relationship of CC-122.

    PubMed

    Li, Yan; Carayannopoulos, Leonidas N; Thomas, Michael; Palmisano, Maria; Zhou, Simon

    2016-01-01

    CC-122 hydrochloride is a novel pleiotropic pathway modifier compound that binds cereblon, a substrate receptor of the Cullin 4 RING E3 ubiquitin ligase complex. CC-122 has multiple activities including modulation of immune cells, antiproliferative activity of multiple myeloma and lymphoma cells, and antiangiogenic activity. CC-122 is being developed as an oncology treatment for hematologic malignancies and advanced solid tumors. Cardiovascular and vital sign assessments of CC-122 have been conducted in hERG assays in vitro and in a 28-day good laboratory practice monkey study with negative signals. To assess the potential concentration-QTc relationship in humans and to ascertain or exclude a small QT effect by CC-122, a plasma concentration exposure- and ΔQTcF-response model of CC-122 was developed. Intensive CC-122 concentration and paired triplicate electrocardiogram data from a single ascending dose study were included in the analysis. The parameters included in the final linear exposure-response model are intercept, slope, and treatment effect. The slope estimate of 0.0201 with 90% CI of (0.009, 0.035) indicates a weak relationship between ΔQTcF and CC-122 concentration. The upper bounds of the 90% CI of the model-predicted ΔΔQTcF effect at C max from the 4 mg clinical dose and the supratherapeutic dose of 15 mg (1.18 ms and 8.76 ms, respectively) are <10 ms threshold, suggesting that the risk of CC-122 QT prolongation effect at the relevant therapeutic dose range from 1 mg to 4 mg is low.

  18. Association of TNF -1031 C/C as a potential protection marker for leprosy development in Amazonas state patients, Brazil.

    PubMed

    Silva, G A V; Ramasawmy, R; Boechat, A L; Morais, A C; Carvalho, B K S; Sousa, K B A; Souza, V C; Cunha, M G S; Barletta-Naveca, R H; Santos, M P; Naveca, F G

    2015-03-01

    Polymorphisms present in the TNF promoter region has shown to influence the gene transcription. Leprosy displays different clinical manifestations according to the immune responses of the individual infected with Mycobacterium leprae. In this study, we evaluated the single nucleotide polymorphisms (SNPs) -238 G/A (rs361525), -308 G/A (rs1800629), -857 C/T (rs1799724), -863 A/C (rs1800630) and -1031 T/C (rs1799964) in the promoter region of the TNF to see whether these SNPs influence host-susceptibility to leprosy and the different clinical manifestation. Nucleotide sequencing was performed with DNA samples from 108 leprosy patients and 253 control subjects. An association between -1031 C/C genotype and protection from leprosy was observed when leprosy patients were compared to controls (OR 0.11; 95% CI=0.01-0.82; p=0.012). The -857 C/T genotype may be associated with susceptibility to leprosy (OR=1.81; 95% CI=1.09-3.00; p=0.028). Similar genotype and allele frequencies for the SNPs -308 G/A and -238 G/A were observed between leprosy patients and control subjects. Altogether, TNF polymorphisms in the promoter region may be predictive of leprosy outcome.

  19. Simultaneous distribution of AC and DC power

    DOEpatents

    Polese, Luigi Gentile

    2015-09-15

    A system and method for the transport and distribution of both AC (alternating current) power and DC (direct current) power over wiring infrastructure normally used for distributing AC power only, for example, residential and/or commercial buildings' electrical wires is disclosed and taught. The system and method permits the combining of AC and DC power sources and the simultaneous distribution of the resulting power over the same wiring. At the utilization site a complementary device permits the separation of the DC power from the AC power and their reconstruction, for use in conventional AC-only and DC-only devices.

  20. Extinction coefficients of CC and CC bands in ethyne and ethene molecules interacting with Cu+ and Ag+ in zeolites--IR studies and quantumchemical DFT calculations.

    PubMed

    Kozyra, Paweł; Góra-Marek, Kinga; Datka, Jerzy

    2015-02-05

    The values of extinction coefficients of CC and CC IR bands of ethyne and ethene interacting with Cu+ and Ag+ in zeolites were determined in quantitative IR experiments and also by quantumchemical DFT calculations with QM/MM method. Both experimental and calculated values were in very good agreement validating the reliability of calculations. The values of extinction coefficients of ethyne and ethene interacting with bare cations and cations embedded in zeolite-like clusters were calculated. The interaction of organic molecules with Cu+ and Ag+ in zeolites ZSM-5 and especially charge transfers between molecule, cation and zeolite framework was also discussed in relation to the values of extinction coefficients.

  1. An excursion from normal to inverted C-C bonds shows a clear demarcation between covalent and charge-shift C-C bonds.

    PubMed

    Shaik, Sason; Chen, Zhenhua; Wu, Wei; Stanger, Amnon; Danovich, David; Hiberty, Philippe C

    2009-10-19

    What is the nature of the C-C bond? Valence bond and electron density computations of 16 C-C bonds show two families of bonds that flesh out as a phase diagram. One family, involving ethane, cyclopropane and so forth, is typified by covalent C-C bonding wherein covalent spin-pairing accounts for most of the bond energy. The second family includes the inverted bridgehead bonds of small propellanes, where the bond is neither covalent nor ionic, but owes its existence to the resonance stabilization between the respective structures; hence a charge-shift (CS) bond. The dual family also emerges from calculated and experimental electron density properties. Covalent C-C bonds are characterized by negative Laplacians of the density, whereas CS-bonds display small or positive Laplacians. The positive Laplacian defines a region suffering from neighbouring repulsive interactions, which is precisely the case in the inverted bonding region. Such regions are rich in kinetic energy, and indeed the energy-density analysis reveals that CS-bonds are richer in kinetic energy than the covalent C-C bonds. The large covalent-ionic resonance energy is precisely the mechanism that lowers the kinetic energy in the bonding region and restores equilibrium bonding. Thus, different degrees of repulsive strain create two bonding families of the same chemical bond made from a single atomic constituent. It is further shown that the idea of repulsive strain is portable and can predict the properties of propellanes of various sizes and different wing substituents. Experimentally (M. Messerschmidt, S. Scheins, L. Bruberth, M. Patzel, G. Szeimies, C. Paulman, P. Luger, Angew. Chem. 2005, 117, 3993-3997; Angew. Chem. Int. Ed. 2005, 44, 3925-3928), the C-C bond families are beautifully represented in [1.1.1]propellane, where the inverted C-C is a CS-bond, while the wings are made from covalent C-C bonds. What other manifestations can we expect from CS-bonds? Answers from experiment have the potential

  2. Corrosion-Control (CC) Program SIMA (Shore Intermediate Maintenance Activity) Pilot CC (Corrosion-Control) Shop Service Test and Technical Support. Volume 3. Appendix A7.

    DTIC Science & Technology

    1985-11-30

    CC compound; anti-seize and 304 stainless steel fasteners. Lesson 9: CC Systems 10, 11, 12, 13, 14 and 15: Sealing and Coating Compounds - Properties...o c 0 I - 0 a- o A7--29 0 ILl C C ’u 0 a o -c Z’ z 0 0 k. .aL0 1a. 0 0 -4 C. 4 , L; 0 ba. aFa 0D 40 z ~ - 0. m U C 0 a C.a 6 -: C2- EE 41 0. c- 00 -4

  3. Modeling of Human Joint Structures.

    DTIC Science & Technology

    1982-09-01

    Radial Lateral " epicondyle Olecranon Radius Ulna Figure 3. Lateral aspect of the right elbow joint. -17- Annular Ligament This strong band encircles... elbow joint, knee joint, human joints, shoulder joint, ankle joint, joint models, hip joint, ligaments. 20. ABSTRACT (Continue on reverse side If...ligaments. -A rather extended discussion of the articulations and anatomical descriptions of the elbow , shoulder, hip, knee and ankle joints are

  4. Energy Materials Coordinating Committee (EMaCC) Fiscal Year 1999 annual technical report

    SciTech Connect

    2000-10-31

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1999 and describes the materials research programs of various offices and divisions within the Department.

  5. Application of configuration software WinCC in logistics automatic control system

    NASA Astrophysics Data System (ADS)

    Weng, Yifang; Duan, Zhengang; Lian, Xiaoqin; Zhang, Xiaoli; Yang, Wenying

    2006-11-01

    This paper presents the application of WinCC in Logistics Automatic Control System on the experiment facility of miniature warehouse. The information management system, the supervisory control system and the PLC execution part are developed. The communication between WinCC and PLC based on the PROFIBUS protocol is implemented. DDE Communication, VB as server and WinCC as client, is realized. The system combines information management and supervisory control together and works well. It would be applicable to industry after deeper study.

  6. Active Metal Brazing and Characterization of Brazed Joints in Titanium to Carbon-Carbon Composites

    NASA Technical Reports Server (NTRS)

    Singh, M.; Shpargel, T. P.; Morscher, G. N.; Asthana, R.

    2006-01-01

    The Ti-metal/C-C composite joints were formed by reactive brazing with three commercial brazes, namely, Cu-ABA, TiCuNi, and TiCuSiI. The joint microstructures were examined using optical microscopy and scanning electron microscopy (SEM) coupled with energy dispersive spectrometry (EDS). The results of the microstructure analysis indicate solute redistribution across the joint and possible metallurgical bond formation via interdiffusion, which led to good wetting and spreading. A tube-on-plate tensile test was used to evaluate joint strength of Ti-tube/ C-C composite joints. The load-carrying ability was greatest for the Cu-ABA braze joint structures. This system appeared to have the best braze spreading which resulted in a larger braze/C-C composite bonded area compared to the other two braze materials. Also, joint loadcarrying ability was found to be higher for joint structures where the fiber tows in the outer ply of the C-C composite were aligned perpendicular to the tube axis when compared to the case where fiber tows were aligned parallel to the tube axis.

  7. Joint Aspiration (Arthrocentesis)

    MedlinePlus

    ... arthritis, or JRA), systemic lupus erythematosus (SLE), and Lyme disease. Joint aspiration is diagnostic but it also can ... Parents MORE ON THIS TOPIC Evaluate Your Child's Lyme Disease Risk Living With Lupus Bones, Muscles, and Joints ...

  8. Culture - joint fluid

    MedlinePlus

    Joint fluid culture ... fungi, or viruses grow. This is called a culture. If these germs are detected, other tests may ... is no special preparation needed for the lab culture. How to prepare for the removal of joint ...

  9. Temporomandibular Joint Dysfunction

    MedlinePlus

    The temporomandibular joint (TMJ) connects your jaw to the side of your head. When it works well, it enables you to ... For people with TMJ dysfunction, problems with the joint and muscles around it may cause Pain that ...

  10. Knee joint replacement

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002974.htm Knee joint replacement To use the sharing features on this page, please enable JavaScript. Knee joint replacement is a surgery to replace a knee ...

  11. Large displacement spherical joint

    DOEpatents

    Bieg, Lothar F.; Benavides, Gilbert L.

    2002-01-01

    A new class of spherical joints has a very large accessible full cone angle, a property which is beneficial for a wide range of applications. Despite the large cone angles, these joints move freely without singularities.

  12. Hip joint injection

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007633.htm Hip joint injection To use the sharing features on this ... injection is a shot of medicine into the hip joint. The medicine helps relieve pain and inflammation. It ...

  13. Arch & Chord Joint Detail; Crossbracing Center Joint Detail; Chord, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Arch & Chord Joint Detail; Crossbracing Center Joint Detail; Chord, Panel Post, Tie & Diagonal Brace Joint Detail; Chord, Panel Post, Tie & Crossbracing Joint Detail - Dunlapsville Covered Bridge, Spanning East Fork Whitewater River, Dunlapsville, Union County, IN

  14. Effect of N-terminal truncation on antibacterial activity, cytotoxicity and membrane perturbation activity of Cc-CATH3.

    PubMed

    Jittikoon, Jiraphun; Ngamsaithong, Narumon; Pimthon, Jutarat; Vajragupta, Opa

    2015-10-01

    A series of amino-terminal truncated analogues of quail antimicrobial peptide Cc-CATH3(1-29) were created and examined antibacterial activity against Gram-positive bacteria, cytotoxicity against mouse fibroblast cell line, and membrane perturbation activity against various membrane models. Parent peptide Cc-CATH3(1-29) and the first four-residue truncated peptide Cc-CATH3(5-29) were active in all tested experiments. In contrast, the eight- and twelve-residue truncated variants Cc-CATH3(9-29) and Cc-CATH3(13-29) appeared to have lost activities. Cc-CATH3(1-29) and Cc-CATH3(5-29) possessed antibacterial activity with minimum inhibitory concentrations of 2-4 and 1-2 µM, respectively. For cytotoxicity, Cc-CATH3(1-29) and Cc-CATH3(5-29) displayed cytotoxicity with the IC50 values of 9.33 and 4.93 μM, respectively. Cc-CATH3(5-29) induced greater liposome membranes disruption than Cc-CATH3(1-29) regardless of lipid type and composition. The leakage results of Cc-CATH3(1-29) share a similar trend with that in Cc-CATH3(5-29); they exhibit no preferential binding to anionic phospholipids. In conclusion, the results suggested that the first four residues at the N-terminus "RVRR" is not essential for presenting all test activities. In contrast, residues five to eight of "FWPL" are necessary as the exclusion of this short motif in Cc-CATH3(9-29) and Cc-CATH3(13-29) leads to a loss of activities. This study will be beneficial for further design and development of Cc-CATH3 to be novel antibiotic.

  15. Energy materials coordinating committee (EMaCC). Annual technical report, fiscal year 2003

    SciTech Connect

    none,

    2004-10-18

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. Topical subcommittees of the EMaCC are responsible for conducting seminars and otherwise facilitating information flow between DOE organizational units in materials areas of particular importance to the Department. The EMaCC Terms of Reference were recently modified and developed into a Charter that was approved on June 5, 2003. As a result of this reorganization, the existing subcommittees were disbanded and new subcommittees are being formed.

  16. 21. Historic American Buildings Survey Copyright C.C. Pierce Original: ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. Historic American Buildings Survey Copyright - C.C. Pierce Original: About 1902 Re-photo: April 1940 QUANDRANGLE (view from north) - Mission Nuestra Senora de la Soledad, Soledad, Monterey County, CA

  17. Iron-mediated cleavage of C-C bonds in vicinal tricarbonyl compounds in water.

    PubMed

    Mecinović, Jasmin; Hamed, Refaat B; Schofield, Christopher J

    2009-01-01

    Three of a kind: Vicinal tricarbonyl compounds undergo C-C cleavage mediated by ferric ions (see scheme). The observed cleavage of ninhydrin and dehydroascorbic acid has relevance for amino acid detection and the metabolism of vitamin C.

  18. Metal-Free Oxidative C-C Bond Formation through C-H Bond Functionalization.

    PubMed

    Narayan, Rishikesh; Matcha, Kiran; Antonchick, Andrey P

    2015-10-12

    The formation of C-C bonds embodies the core of organic chemistry because of its fundamental application in generation of molecular diversity and complexity. C-C bond-forming reactions are well-known challenges. To achieve this goal through direct functionalization of C-H bonds in both of the coupling partners represents the state-of-the-art in organic synthesis. Oxidative C-C bond formation obviates the need for prefunctionalization of both substrates. This Minireview is dedicated to the field of C-C bond-forming reactions through direct C-H bond functionalization under completely metal-free oxidative conditions. Selected important developments in this area have been summarized with representative examples and discussions on their reaction mechanisms.

  19. 5. Historic American Buildings Survey C.C. Woodburn, Photographer. January 12, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Historic American Buildings Survey C.C. Woodburn, Photographer. January 12, 1934 DETAIL OF ENTRANCE (WEST ELEVATION) - Ferdinand Daniel Pulver House, County Road F-70 Vicinity, Vandalia, Jasper County, IA

  20. Lnc-CC3 increases metastasis in cervical cancer by increasing Slug expression

    PubMed Central

    Jiang, Binyuan; Sun, Ruili; Fang, Shujuan; Qin, Changfei; Pan, Xi; Peng, Li; Li, Yuehui; Li, Guancheng

    2016-01-01

    Although screening has reduced mortality rates, metastasis still results in poor survival and prognosis in cervical cancer patients. We compared cervical cancer ESTs libraries with other ESTs libraries to identify candidate genes and cloned a novel cervical cancer-associated lncRNA, lnc-CC3. Overexpression of lnc-CC3 promoted migration and invasion by SiHa cervical cancer cells in vitro and in vivo, increased Slug expression, and reduced the expression of the epithelial cell marker E-cadherin. Conversely, lnc-CC3 knockdown altered SiHa cell morphology and increased the expression of E-cadherin, thereby suppressing migration and invasion. These results suggest lnc-CC3 may be a useful marker of metastasis in cervical cancer. PMID:27223436

  1. C/C composite brake disk nondestructive evaluation by IR thermography

    NASA Astrophysics Data System (ADS)

    Chu, Tsuchin P.; Poudel, Anish; Filip, Peter

    2012-06-01

    This paper discusses the non-destructive evaluation of thick Carbon/Carbon (C/C) composite aircraft brake disks by using transient infrared thermography (IRT) approach. Thermal diffusivity measurement technique was applied to identify the subsurface anomalies in thick C/C brake disks. In addition, finite element analysis (FEA) modeling tool was used to determine the transient thermal response of the C/C disks that were subjected to flash heating. For this, series of finite element models were built and thermal responses with various thermal diffusivities subjected to different heating conditions were investigated. Experiments were conducted to verify the models by using custom built in-house IRT system and commercial turnkey system. The analysis and experimental results showed good correlation between thermal diffusivity value and anomalies within the disk. It was demonstrated that the step-heating transient thermal approach could be effectively applied to obtain the whole field thermal diffusivity value of C/C composites.

  2. Pyrazole prevention of CC14-induced ultrastructural changes in rat liver.

    PubMed Central

    Bernacchi, A. S.; de Castro, C. R.; de Toranzo, E. G.; Marzi, A.; de Ferreyra, E. C.; de Fenos, O. M.; Castro, J. A.

    1980-01-01

    Carbon tetrachloride (CC14) administration to rats leads to an early dilatation, vesiculation and disorganization of the liver endoplasmic reticulum (ER). This hepatotoxin also causes detachment of ribosomes from ER membranes, dilatation of the Golgi cisternae and occasionally dilatation of the perinuclear membrane. Prior treatment of the rats with pyrazole completely prevents CC14- induced ultrastructural alterations observed in liver at 3 h. This drug is known to decrease the intensity of the irreversible binding of CC14 reactive metabolites to cellular constituents without modifying the intensity of the CC14- induced lipid peroxidation, either in vitro or in vivo, as measured by the diene conjugation procedure or by decreases inthe arachidonic acid content of microsomal phospholipids. Results suggest that interaction of reactive metabolites rather than lipid peroxidation mediates deleterious effects of CCl4 on the liver ER. Images Fig. 1 Fig. 2 Fig. 3 PMID:7448119

  3. Aberrant MHC class II expression in mouse joints leads to arthritis with extraarticular manifestations similar to rheumatoid arthritis

    PubMed Central

    Kanazawa, Satoshi; Ota, Shusuke; Sekine, Chiyoko; Tada, Toyohiro; Otsuka, Takanobu; Okamoto, Takashi; Sønderstrup, Grete; Peterlin, B. Matija

    2006-01-01

    Genetic susceptibility to rheumatoid arthritis (RA) is associated with certain MHC class II molecules. To clarify the role of these determinants in RA, we generated the D1CC transgenic mouse that expressed genes involved in antigen processing and presentation by the MHC class II pathway in joints. The class II transactivator, which was transcribed from the rat collagen type II promoter and enhancer, directed the expression of these genes. In D1CC mice congenic for the H-2q (DBA/1) background, small amounts of bovine collagen type II in adjuvant induced reproducibly an inflammatory arthritis resembling RA. Importantly, these stimuli had no effect in DBA/1 mice. Eighty-nine percent of D1CC mice developed chronic disease with joint swelling, redness, and heat in association with synovial proliferation as well as pannus formation and mononuclear infiltration of synovial membranes. Granulomatous lesions resembling rheumatoid nodules and interstitial pneumonitis also were observed. As in patients with RA, anticyclic citrullinated peptide antibodies were detected during the inflammatory stage. Finally, joints in D1CC mice displayed juxtaarticular demineralization, severe joint space narrowing, and erosions, which led to ankylosis, but without the appearance of osteophytes. Thus, aberrant expression of MHC class II in joints facilitates the development of severe erosive inflammatory polyarthritis, which is very similar to RA. PMID:16980409

  4. Joint Enrollment Report, 2014

    ERIC Educational Resources Information Center

    Iowa Department of Education, 2014

    2014-01-01

    The Iowa Department of Education collects information on joint enrollment in Iowa's 15 community colleges. Jointly enrolled students are high school students enrolled in community college credit coursework. Most jointly enrolled students enroll through Senior Year Plus (SYP) programs such as Postsecondary Enrollment Options (PSEO) and concurrent…

  5. Joint Aspiration (Arthrocentesis)

    MedlinePlus

    ... Old Feeding Your 1- to 2-Year-Old Joint Aspiration (Arthrocentesis) KidsHealth > For Parents > Joint Aspiration (Arthrocentesis) Print A A A What's in ... español Aspiración articular (artrocentesis) What It Is A joint aspiration (arthrocentesis) is a test that involves withdrawing ( ...

  6. TIM-3 Rs10515746 (A/C) and Rs10053538 (C/A) Gene Polymorphisms and Risk of Multiple Sclerosis

    PubMed Central

    YAGHOOBI, Esmat; ABEDIAN, Saeed; BABANI, Omid; IZAD, Maryam

    2016-01-01

    Background: Multiple sclerosis (MS) is an autoimmune disease of the central nervous system (CNS) caused by auto-reactive T cells against myelin antigens. T-cell immunoglobulin mucin -3 (TIM-3) is a negative regulator glycoprotein expressed by a range of immune cells, including, Th1 cells, activated CD8+ T cells and in a lower level on Th17 cells. A defect in TIM-3 regulation has been shown in multiple sclerosis patients. In humans, several single nucleotide polymorphisms (SNPs) have been identified in the TIM-3 gene and are associated with inflammatory diseases. The aim of this study was to analyze the association between TIM-3 -574A>C and -1516 C>A SNPs in the promoter region, and susceptibility to MS. Methods: DNA samples from 102 patients and 102 healthy controls were genotyped using RFLP-PCR method. Results: In this case-control study, analysis of the alleles and genotypes revealed a significant higher frequency of C/C and lower frequency of A/C genotypes for -574 locus of TIM-3 gene in MS patients (P=0.0002). We also found that C/C genotype for locus of -1516 increased in MS patients, while A/C genotype decreased (P=0.012). Allele C of -574C/C and -1516 C>A SNPs were also more frequent in MS patients (P=0.036 and 0.0027 respectively). Conclusion: -574 A>C and -1516 C>A SNPs in the promoter region of TIM3 gene may affect the disease susceptibility. PMID:27398337

  7. Energy Materials Coordinating Committee (EMaCC). Annual technical report, Fiscal Year 2001

    SciTech Connect

    None, None

    2002-08-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations.

  8. Photocatalytic C-C Bond Cleavage and Amination of Cycloalkanols by Cerium(III) Chloride Complex.

    PubMed

    Guo, Jing-Jing; Hu, Anhua; Chen, Yilin; Sun, Jianfeng; Tang, Haoming; Zuo, Zhiwei

    2016-12-05

    A general strategy for the cleavage and amination of C-C bonds of cycloalkanols has been achieved through visible-light-induced photoredox catalysis utilizing a cerium(III) chloride complex. This operationally simple methodology has been successfully applied to a wide array of unstrained cyclic alcohols, and represents the first example of catalytic C-C bond cleavage and functionalization of unstrained secondary cycloalkanols.

  9. First Detection of c-C3H2 in a Circumstellar Disk

    NASA Astrophysics Data System (ADS)

    Qi, Chunhua; Öberg, Karin I.; Wilner, David J.; Rosenfeld, Katherine A.

    2013-03-01

    We report the first detection of c-C3H2 in a circumstellar disk. The c-C3H2 J = 6-5 line (217.882 GHz) is detected and imaged through Atacama Large Millimeter Array (ALMA) Science Verification observations toward the disk around the Herbig Ae star HD 163296 at 0.''8 resolution. The emission is consistent with that arising from a Keplerian rotating disk. Two additional c-C3H2 transitions are also tentatively detected, bolstering the identification of this species, but with insufficient signal-to-noise ratio to constrain the spatial distribution. Using a previously developed model for the physical structure of this disk, we fit a radial power-law distribution model to the c-C3H2 6-5 emission and find that c-C3H2 is present in a ring structure from an inner radius of about 30 AU to an outer radius of about 165 AU. The column density is estimated to be 1012-1013 cm-2. The clear detection and intriguing ring structure suggest that c-C3H2 has the potential to become a useful probe of radiation penetration in disks.

  10. Energy Materials Coordinating Committee (EMaCC): Annual technical report, fiscal year 1988

    SciTech Connect

    1989-06-30

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. Four topical subcommittees are established and are continuing their own programs: Structural Ceramics, Batteries and Fuel Cells, Radioactive Waste Containment, and Superconductivity (established in FY 1987). In addition, the EMaCC aids in obtaining materials-related inputs for both intra- and interagency compilations. Membership in the EMaCC is open to any Department organizational unit; participants are appointed by Division or Office Directors. The current active membership is listed on the following four pages. The EMaCC reports to the Director of the Office of Energy Research in his capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1988 and describes the materials research programs of various offices and divisions within the Department.

  11. Improving Forecast Skill by Assimilation of AIRS Cloud Cleared Radiances RiCC

    NASA Technical Reports Server (NTRS)

    Susskind, Joel; Rosenberg, Robert I.; Iredell, Lena

    2015-01-01

    ECMWF, NCEP, and GMAO routinely assimilate radiosonde and other in-situ observations along with satellite IR and MW Sounder radiance observations. NCEP and GMAO use the NCEP GSI Data Assimilation System (DAS).GSI DAS assimilates AIRS, CrIS, IASI channel radiances Ri on a channel-by-channel, case-by-case basis, only for those channels i thought to be unaffected by cloud cover. This test excludes Ri for most tropospheric sounding channels under partial cloud cover conditions. AIRS Version-6 RiCC is a derived quantity representative of what AIRS channel i would have seen if the AIRS FOR were cloud free. All values of RiCC have case-by-case error estimates RiCC associated with them. Our experiments present to the GSI QCd values of AIRS RiCC in place of AIRS Ri observations. GSI DAS assimilates only those values of RiCC it thinks are cloud free. This potentially allows for better coverage of assimilated QCd values of RiCC as compared to Ri.

  12. Evaluation by Rocket Combustor of C/C Composite Cooled Structure Using Metallic Cooling Tubes

    NASA Astrophysics Data System (ADS)

    Takegoshi, Masao; Ono, Fumiei; Ueda, Shuichi; Saito, Toshihito; Hayasaka, Osamu

    In this study, the cooling performance of a C/C composite material structure with metallic cooling tubes fixed by elastic force without chemical bonding was evaluated experimentally using combustion gas in a rocket combustor. The C/C composite chamber was covered by a stainless steel outer shell to maintain its airtightness. Gaseous hydrogen as a fuel and gaseous oxygen as an oxidizer were used for the heating test. The surface of these C/C composites was maintained below 1500 K when the combustion gas temperature was about 2800 K and the heat flux to the combustion chamber wall was about 9 MW/m2. No thermal damage was observed on the stainless steel tubes that were in contact with the C/C composite materials. The results of the heating test showed that such a metallic tube-cooled C/C composite structure is able to control the surface temperature as a cooling structure (also as a heat exchanger) as well as indicated the possibility of reducing the amount of coolant even if the thermal load to the engine is high. Thus, application of this metallic tube-cooled C/C composite structure to reusable engines such as a rocket-ramjet combined-cycle engine is expected.

  13. High-resolution structure of the Tiam1 PHn-CC-Ex domain.

    PubMed

    Joshi, Monika; Gakhar, Lokesh; Fuentes, Ernesto J

    2013-07-01

    The T-lymphoma and metastasis gene 1 (TIAM1) encodes a guanine nucleotide-exchange factor protein (Tiam1) that is specific for the Rho-family GTPase Rac1 and is important for cell polarity, migration and adhesion. Tiam1 is a large multi-domain protein that contains several protein-protein binding domains that are important for regulating cellular function. The PHn-CC-Ex domain is critical for plasma-membrane association and interactions with protein-scaffold proteins (e.g. Par3b, spinophilin, IRSp53 and JIP2) that direct Tiam1-Rac1 signaling specificity. It was determined that the coiled-coil domain of Par3b binds the PHn-CC-Ex domain with a dissociation constant of ≈ 30 µM. Moreover, the structures of two variants of the Tiam1 PHn-CC-Ex domain were solved at resolutions of 1.98 and 2.15 Å, respectively. The structures indicate that the PHn, CC and Ex regions form independent subdomains that together provide an integrated platform for binding partner proteins. Small-angle X-ray scattering (SAXS) data indicate that the Tiam1 PHn-CC-Ex domain is monomeric in solution and that the solution and crystal structures are very similar. Together, these data provide the foundation necessary to elucidate the structural mechanism of the PHn-CC-Ex/scaffold interactions that are critical for Tiam1-Rac1 signaling specificity.

  14. Hemorrhagic metalloproteinase, Cc HSM-III, isolated from Cerastes cerastes venom: Purification and biochemical characterization.

    PubMed

    Tachoua, Wafa; Boukhalfa-Abib, Hinda; Laraba-Djebari, Fatima

    2017-02-28

    Snake venom metalloproteinases are the most abundant toxins in Viperidae venoms. In this study, a new hemorrhagin, Cc HSM-III (66 kDa), was purified from Cerastes cerastes venom by gel filtration, ion exchange, and reversed-phase high-performance liquid chromatographies. The analysis of Cc HSM-III by liquid chromatography with a tandem mass spectrometry revealed 32 peptides sharing a homology with P-III metalloproteinases from Echis ocellatus snake venom. Cc HSM-III displays hemorrhagic activity with a minimal hemorrhagic dose of 5 μg, which is abolished by ethylene diamine tetracetic acid but not by phenylmethylsulfonyl fluoride. The mechanism underlying Cc HSM-III hemorrhagic activity is probably due to its extensive proteolytic activity against type IV collagen. Cc HSM-III induces local tissue damage and an inflammatory response by upregulating both matrix metalloproteinase 2 and 9 in skin of mice. Thus, Cc HSM-III may play a key role in the pathogenesis of C. cerastes envenomation.

  15. Ablation Resistance of C/C Composites with Atmospheric Plasma-Sprayed W Coating

    NASA Astrophysics Data System (ADS)

    Zhou, Zhe; Wang, Yuan; Gong, Jieming; Ge, Yicheng; Peng, Ke; Ran, Liping; Yi, Maozhong

    2016-12-01

    To improve the ablation resistance of carbon/carbon (C/C) composites, tungsten (W) coating with thickness of 1.2 mm was applied by atmospheric plasma spraying. The antiablation property of the coated composites was evaluated by oxyacetylene flame ablation experiments. The phase composition of the coating was investigated by a combination of x-ray diffraction analysis and scanning electron microscopy with energy-dispersive x-ray spectroscopy analysis. The ablation resistance of the coated C/C substrates was compared with that of uncoated C/C composites and C/C-CuZr composites after ablation for 30 s. The properties of the coated C/C composites after ablation time of 10, 30, 60, 90, 120, and 180 s were further studied. The results indicated that the mass and linear ablation rates of the W-coated C/C composites were lower than those of uncoated C/C or C/C-CuZr composites after ablation for 30 s. The coating exhibited heat stability after 120 s of ablation, with mass loss and linear ablation rates of 7.39 × 10-3 g/s and 3.50 × 10-3 mm/s, respectively. However, the W coating became ineffective and failed after ablation for 180 s. Three ablation regions could be identified, in which the ablation mechanism of the coating changed from thermochemical to thermophysical erosion to mechanical scouring with increasing ablation time.

  16. Densification Behavior and Performances of C/C Composites Derived from Various Carbon Matrix Precursors

    NASA Astrophysics Data System (ADS)

    Shao, H. C.; Xia, H. Y.; Liu, G. W.; Qiao, G. J.; Xiao, Z. C.; Su, J. M.; Zhang, X. H.; Li, Y. J.

    2014-01-01

    Three types of carbon/carbon (C/C) composites were manufactured by densifying the needled carbon fiber preform through resin and pitch impregnation/carbonization repeatedly, as well as propylene pyrolysis by chemical vapor infiltration plus carbonization after the resin impregnation/carbonization. The densification behavior and performances (involving electric, thermal, and mechanical properties, as well as impurity) of the C/C composites were investigated systematically. The results show that besides the processing and testing conditions, the electric resistivity, thermal conductivity (TC), coefficient of thermal expansion (CTE), strength, and fracture, as well as impurity content and composition of the C/C composites were closely related to the fiber orientation, interfacial bonding between carbon fiber and carbon matrix, material characteristics of the three precursors and the resulting matrix carbons. In particular, the resin-carbon matrix C/C (RC/C) composites had the highest electric resistivity, tensile, and flexural strength, as well as impurity content. Meanwhile, the pitch-carbon matrix C/C (PC/C) composites possessed the highest TC and CTE in the parallel and vertical direction. And most of the performances of pyro-carbon/resin carbon matrix C/C composites were between those of the RC/C and PC/C composites except the impurity content.

  17. Effect of the magnetic material on AC losses in HTS conductors in AC magnetic field carrying AC transport current

    NASA Astrophysics Data System (ADS)

    Wan, Xing-Xing; Huang, Chen-Guang; Yong, Hua-Dong; Zhou, You-He

    2015-11-01

    This paper presents an investigation on the AC losses in several typical superconducting composite conductors using the H-formulation model. A single superconducting strip with ferromagnetic substrate or cores and a stack of coated conductors with ferromagnetic substrates are studied. We consider all the coated conductors carrying AC transport currents and simultaneously exposed to perpendicular AC magnetic fields. The influences of the amplitude, frequency, phase difference and ferromagnetic materials on the AC losses are investigated. The results show that the magnetization losses of single strip and stacked strips have similar characteristics. The ferromagnetic substrate can increase the magnetization loss at low magnetic field, and decrease the loss at high magnetic field. The ferromagnetic substrate can obviously increase the transport loss in stacked strips. The trends of total AC losses of single strip and stacked strips are similar when they are carrying current or exposed to a perpendicular magnetic field. The effect of the frequency on the total AC losses of single strip is related to the amplitude of magnetic field. The AC losses decrease with increasing frequency in low magnetic field region while increase in high magnetic field region. As the phase difference changes, there is a periodic variation for the AC losses. Moreover, when the strip is under only the transport current and magnetic field, the ferromagnetic cores will increase the AC losses for large transport current or field.

  18. Human and Swine Hosts Share Vancomycin-Resistant Enterococcus faecium CC17 and CC5 and Enterococcus faecalis CC2 Clonal Clusters Harboring Tn1546 on Indistinguishable Plasmids▿†

    PubMed Central

    Freitas, Ana R.; Coque, Teresa M.; Novais, Carla; Hammerum, Anette M.; Lester, Camilla H.; Zervos, Marcus J.; Donabedian, Susan; Jensen, Lars B.; Francia, Maria Victoria; Baquero, Fernando; Peixe, Luísa

    2011-01-01

    VRE isolates from pigs (n = 29) and healthy persons (n = 12) recovered during wide surveillance studies performed in Portugal, Denmark, Spain, Switzerland, and the United States (1995 to 2008) were compared with outbreak/prevalent VRE clinical strains (n = 190; 23 countries; 1986 to 2009). Thirty clonally related Enterococcus faecium clonal complex 5 (CC5) isolates (17 sequence type 6 [ST6], 6 ST5, 5 ST185, 1 ST147, and 1 ST493) were obtained from feces of swine and healthy humans. This collection included isolates widespread among pigs of European Union (EU) countries since the mid-1990s. Each ST comprised isolates showing similar pulsed-field gel electrophoresis (PFGE) patterns (≤6 bands difference; >82% similarity). Some CC5 PFGE subtype strains from swine were indistinguishable from hospital vancomycin-resistant enterococci (VRE) causing infections. A truncated variant of Tn1546 (encoding resistance to vancomycin) and tcrB (coding for resistance to copper) were consistently located on 150- to 190-kb plasmids (reppLG1). E. faecium CC17 (ST132) isolates from pig manure and two clinical samples showed identical PFGE profiles and contained a 60-kb mosaic plasmid (repInc18 plus reppRUM) carrying diverse Tn1546-IS1216 variants. The only Enterococcus faecalis isolate obtained from pigs (CC2-ST6) corresponded to a multidrug-resistant clone widely disseminated in hospitals in Italy, Portugal, and Spain, and both animal and human isolates harbored an indistinguishable 100-kb mosaic plasmid (reppRE25 plus reppCF10) containing the whole Tn1546 backbone. The results indicate a current intra- and international spread of E. faecium and E. faecalis clones and their plasmids among swine and humans. PMID:21227995

  19. ac electroosmosis in rectangular microchannels.

    PubMed

    Campisi, Michele; Accoto, Dino; Dario, Paolo

    2005-11-22

    Motivated by the growing interest in ac electroosmosis as a reliable no moving parts strategy to control fluid motion in microfluidic devices for biomedical applications, such as lab-on-a-chip, we study transient and steady-state electrokinetic phenomena (electroosmosis and streaming currents) in infinitely extended rectangular charged microchannels. With the aid of Fourier series and Laplace transforms we provide a general formal solution of the problem, which is used to study the time-dependent response to sudden ac applied voltage differences in case of finite electric double layer. The Debye-Huckel approximation has been adopted to allow for an algebraic solution of the Poisson-Boltzmann problem in Fourier space. We obtain the expressions of flow velocity profiles, flow rates, streaming currents, as well as expressions of the complex hydraulic and electrokinetic conductances. We analyze in detail the dependence of the electrokinetic conductance on the extension of linear dimensions relative to the Debye length, with an eye on finite electric double layer effects.

  20. ACS PSF Variations with Temperatures

    NASA Astrophysics Data System (ADS)

    Sahu, Kailash C.; Lallo, Matt; Makidon, Russ

    2007-09-01

    We have used the HST ACS/WFC observations of a Galactic bulge field taken over a continuous interval of 7 days (Prop 9750) to investigate the possible dependence of the ACS focus with the external temperatures. This dataset allows us to investigate possible focus variations over timescales of a few hours to a few days. The engineering data related to the external temperatures for this duration show that the maximum temperature change occurred over the first 1.5 days. Among all the different temperatures recorded, the truss diametric differential and the truss axial temperatures are the only two temperatures which have the same timescale of variation as the PSFwidth variations. The PSF-widths also strongly correlate with these two temperatures during this time interval. We empirically fit the PSF-width variations with these 2 temperature sensor values. This suggests that the focus has a similar dependence, and we recommend that this finding be followed up with the determination of actual focus values to check if the focus values indeed have the same correlation. If so, the temperature data can be useful in estimating the focus values, which can then be used to predict the PSFs to a first order.

  1. ac electroosmosis in rectangular microchannels

    NASA Astrophysics Data System (ADS)

    Campisi, Michele; Accoto, Dino; Dario, Paolo

    2005-11-01

    Motivated by the growing interest in ac electroosmosis as a reliable no moving parts strategy to control fluid motion in microfluidic devices for biomedical applications, such as lab-on-a-chip, we study transient and steady-state electrokinetic phenomena (electroosmosis and streaming currents) in infinitely extended rectangular charged microchannels. With the aid of Fourier series and Laplace transforms we provide a general formal solution of the problem, which is used to study the time-dependent response to sudden ac applied voltage differences in case of finite electric double layer. The Debye-Hückel approximation has been adopted to allow for an algebraic solution of the Poisson-Boltzmann problem in Fourier space. We obtain the expressions of flow velocity profiles, flow rates, streaming currents, as well as expressions of the complex hydraulic and electrokinetic conductances. We analyze in detail the dependence of the electrokinetic conductance on the extension of linear dimensions relative to the Debye length, with an eye on finite electric double layer effects.

  2. Arthroscopic-Assisted Acromioclavicular Joint Reconstruction Using the TightRope Device With Allograft Augmentation: Surgical Technique

    PubMed Central

    Frank, Rachel M.; Trenhaile, Scott W.

    2015-01-01

    Surgical management of acromioclavicular (AC) joint separations remains challenging, especially in the revision setting. Most commonly, Rockwood type I and II injuries are managed nonoperatively whereas type IV, V, and VI injuries are managed with surgery. Type III separations are more controversial, with evidence supporting both nonoperative and operative treatment options. Multiple different arthroscopic techniques have been described; however, there is no current gold standard. AC joint reconstruction with the TightRope device (Arthrex, Naples, FL) with the patient in the lateral decubitus position is a method of restoring joint stability that allows for a minimally invasive, low-profile fixation construct using a single drill hole through the clavicle. Allograft augmentation of this fixation construct helps to eliminate the stress risers potentially created by this device while increasing overall repair construct stability. The purpose of this article is to describe the surgical technique for arthroscopic AC joint reconstruction using a TightRope device with allograft augmentation. PMID:26759765

  3. RHIC spin flipper AC dipole controller

    SciTech Connect

    Oddo, P.; Bai, M.; Dawson, C.; Gassner, D.; Harvey, M.; Hayes, T.; Mernick, K.; Minty, M.; Roser, T.; Severino, F.; Smith, K.

    2011-03-28

    The RHIC Spin Flipper's five high-Q AC dipoles which are driven by a swept frequency waveform require precise control of phase and amplitude during the sweep. This control is achieved using FPGA based feedback controllers. Multiple feedback loops are used to and dynamically tune the magnets. The current implementation and results will be presented. Work on a new spin flipper for RHIC (Relativistic Heavy Ion Collider) incorporating multiple dynamically tuned high-Q AC-dipoles has been developed for RHIC spin-physics experiments. A spin flipper is needed to cancel systematic errors by reversing the spin direction of the two colliding beams multiple times during a store. The spin flipper system consists of four DC-dipole magnets (spin rotators) and five AC-dipole magnets. Multiple AC-dipoles are needed to localize the driven coherent betatron oscillation inside the spin flipper. Operationally the AC-dipoles form two swept frequency bumps that minimize the effect of the AC-dipole dipoles outside of the spin flipper. Both AC bumps operate at the same frequency, but are phase shifted from each other. The AC-dipoles therefore require precise control over amplitude and phase making the implementation of the AC-dipole controller the central challenge.

  4. Association of Children’s Urinary CC16 Levels with Arsenic Concentrations in Multiple Environmental Media

    PubMed Central

    Beamer, Paloma I.; Klimecki, Walter T.; Loh, Miranda; Van Horne, Yoshira Ornelas; Sugeng, Anastasia J.; Lothrop, Nathan; Billheimer, Dean; Guerra, Stefano; Lantz, Robert Clark; Canales, Robert A.; Martinez, Fernando D.

    2016-01-01

    Arsenic exposure has been associated with decreased club cell secretory protein (CC16) levels in adults. Further, both arsenic exposure and decreased levels of CC16 in childhood have been associated with decreased adult lung function. Our objective was to determine if urinary CC16 levels in children are associated with arsenic concentrations in environmental media collected from their homes. Yard soil, house dust, and tap water were taken from 34 homes. Urine and toenail samples were collected from 68 children. All concentrations were natural log-transformed prior to data analysis. There were associations between urinary CC16 and arsenic concentration in soil (b = −0.43, p = 0.001, R2 = 0.08), water (b = −0.22, p = 0.07, R2 = 0.03), house dust (b = −0.37, p = 0.07, R2 = 0.04), and dust loading (b = −0.21, p = 0.04, R2 = 0.04). In multiple analyses, only the concentration of arsenic in soil was associated with urinary CC16 levels (b = −0.42, p = 0.02, R2 = 0.14 (full model)) after accounting for other factors. The association between urinary CC16 and soil arsenic may suggest that localized arsenic exposure in the lungs could damage the airway epithelium and predispose children for diminished lung function. Future work to assess this possible mechanism should examine potential associations between airborne arsenic exposures, CC16 levels, lung function, and other possible confounders in children in arsenic-impacted communities. PMID:27223295

  5. CC-chemokine class inhibition attenuates pathological angiogenesis while preserving physiological angiogenesis.

    PubMed

    Ridiandries, Anisyah; Tan, Joanne T M; Ravindran, Dhanya; Williams, Helen; Medbury, Heather J; Lindsay, Laura; Hawkins, Clare; Prosser, Hamish C G; Bursill, Christina A

    2017-03-01

    Increasing evidence shows that CC-chemokines promote inflammatory-driven angiogenesis, with little to no effect on hypoxia-mediated angiogenesis. Inhibition of the CC-chemokine class may therefore affect angiogenesis differently depending on the pathophysiological context. We compared the effect of CC-chemokine inhibition in inflammatory and physiological conditions. In vitro, the broad-spectrum CC-chemokine inhibitor "35K" inhibited inflammatory-induced endothelial cell proliferation, migration, and tubulogenesis, with more modest effects in hypoxia. In vivo, adenoviruses were used to overexpress 35K (Ad35K) and GFP (AdGFP, control virus). Plasma chemokine activity was suppressed by Ad35K in both models. In the periarterial femoral cuff model of inflammatory-driven angiogenesis, overexpression of 35K inhibited adventitial neovessel formation compared with control AdGFP-infused mice. In contrast, 35K preserved neovascularization in the hindlimb ischemia model and had no effect on physiological neovascularization in the chick chorioallantoic membrane assay. Mechanistically, 2 key angiogenic proteins (VEGF and hypoxia-inducible factor-1α) were conditionally regulated by 35K, such that expression was inhibited in inflammation but was unchanged in hypoxia. In conclusion, CC-chemokine inhibition by 35K suppresses inflammatory-driven angiogenesis while preserving physiological ischemia-mediated angiogenesis via conditional regulation of VEGF and hypoxia-inducible factor-1α. CC-chemokine inhibition may be an alternative therapeutic strategy for suppressing diseases associated with inflammatory angiogenesis without inducing the side effects caused by global inhibition.- Ridiandries, A., Tan, J. T. M., Ravindran, D., Williams, H., Medbury, H. J., Lindsay, L., Hawkins, C., Prosser, H. C. G., Bursill, C. A. CC-chemokine class inhibition attenuates pathological angiogenesis while preserving physiological angiogenesis.

  6. Quartic scaling second-order approximate coupled cluster singles and doubles via tensor hypercontraction: THC-CC2

    NASA Astrophysics Data System (ADS)

    Hohenstein, Edward G.; Kokkila, Sara I. L.; Parrish, Robert M.; Martínez, Todd J.

    2013-03-01

    The second-order approximate coupled cluster singles and doubles method (CC2) is a valuable tool in electronic structure theory. Although the density fitting approximation has been successful in extending CC2 to larger molecules, it cannot address the steep O(N^5) scaling with the number of basis functions, N. Here, we introduce the tensor hypercontraction (THC) approximation to CC2 (THC-CC2), which reduces the scaling to O(N^4) and the storage requirements to O(N^2). We present an algorithm to efficiently evaluate the THC-CC2 correlation energy and demonstrate its quartic scaling. This implementation of THC-CC2 uses a grid-based least-squares THC (LS-THC) approximation to the density-fitted electron repulsion integrals. The accuracy of the CC2 correlation energy under these approximations is shown to be suitable for most practical applications.

  7. Summary of the Mini BNL/LARP/CARE-HHH Workshop on Crab Cavities for the LHC (LHC-CC08)

    SciTech Connect

    Ben-Zvi,I.; Calaga, R.; Zimmermann, F.

    2008-05-01

    The first mini-workshop on crab compensation for the LHC luminosity upgrade (LHC-CC08) was held February 24-25, 2008 at the Brookhaven National Laboratory. A total of 35 participants from 3 continents and 15 institutions from around the world participated to discuss the exciting prospect of a crab scheme for the LHC. If realized it will be the first demonstration in hadron colliders. The workshop is organized by joint collaboration of BNL, US-LARP and CARE-HHH. The enormous interest in the subject of crab cavities for the international linear collider and future light sources has resulted in a large international collaboration to exchange aspects of synergy and expertise. A central repository for this exchange of information documenting the latest design effort for LHC crab cavities is consolidated in a wiki page: https://twiki.cern.ch/twiki/bin/view/Main/LHCCrabCavities. The main goal of this workshop was to define a road-map for a prototype crab cavity to be installed in the LHC and to discuss the associated R&D and beam dynamics challenges. The diverse subject of implementing the crab scheme resulted in a scientific program with a wide range of subtopics which were divided into 8 sessions. Each session was given a list of fundamental questions to be addressed and used as a guideline to steer the discussions.

  8. SOD1 Gene +35A/C (exon3/intron3) Polymorphism in Type 2 Diabetes Mellitus among South Indian Population.

    PubMed

    Nithya, K; Angeline, T; Isabel, W; Asirvatham, A J

    2016-01-01

    Superoxide dismutase is an antioxidant enzyme that is involved in defence mechanisms against oxidative stress. Cu/Zn SOD is a variant that is located in exon3/intron3 boundary. The aim of the present study was to investigate whether the Cu/Zn SOD (+35A/C) gene polymorphism is associated with the susceptibility to type 2 diabetes mellitus among south Indian population. The study included patients with type 2 diabetes mellitus (n = 100) and healthy controls (n = 75). DNA was isolated from the blood and genotyping of Cu/Zn SOD gene polymorphism was done by polymerase chain reaction based restriction fragment length polymorphism method. Occurrence of different genotypes and normal (A) and mutant (C) allele frequencies were determined. The frequency of the three genotypes of the total subjects was as follows: homozygous wild-type A/A (95%), heterozygous genotype A/C (3%), and homozygous mutant C/C (2%). The mutant (C) allele and the mutant genotypes (AC/CC) were found to be completely absent among the patients with type 2 diabetes mellitus. Absence of mutant genotype (CC) shows that the Cu/Zn SOD gene polymorphism may not be associated with the susceptibility to type 2 diabetes mellitus among south Indian population.

  9. SOD1 Gene +35A/C (exon3/intron3) Polymorphism in Type 2 Diabetes Mellitus among South Indian Population

    PubMed Central

    Nithya, K.; Angeline, T.; Isabel, W.; Asirvatham, A. J.

    2016-01-01

    Superoxide dismutase is an antioxidant enzyme that is involved in defence mechanisms against oxidative stress. Cu/Zn SOD is a variant that is located in exon3/intron3 boundary. The aim of the present study was to investigate whether the Cu/Zn SOD (+35A/C) gene polymorphism is associated with the susceptibility to type 2 diabetes mellitus among south Indian population. The study included patients with type 2 diabetes mellitus (n = 100) and healthy controls (n = 75). DNA was isolated from the blood and genotyping of Cu/Zn SOD gene polymorphism was done by polymerase chain reaction based restriction fragment length polymorphism method. Occurrence of different genotypes and normal (A) and mutant (C) allele frequencies were determined. The frequency of the three genotypes of the total subjects was as follows: homozygous wild-type A/A (95%), heterozygous genotype A/C (3%), and homozygous mutant C/C (2%). The mutant (C) allele and the mutant genotypes (AC/CC) were found to be completely absent among the patients with type 2 diabetes mellitus. Absence of mutant genotype (CC) shows that the Cu/Zn SOD gene polymorphism may not be associated with the susceptibility to type 2 diabetes mellitus among south Indian population. PMID:27190652

  10. Sacroiliac joint pain.

    PubMed

    Dreyfuss, Paul; Dreyer, Susan J; Cole, Andrew; Mayo, Keith

    2004-01-01

    The sacroiliac joint is a source of pain in the lower back and buttocks in approximately 15% of the population. Diagnosing sacroiliac joint-mediated pain is difficult because the presenting complaints are similar to those of other causes of back pain. Patients with sacroiliac joint-mediated pain rarely report pain above L5; most localize their pain to the area around the posterior superior iliac spine. Radiographic and laboratory tests primarily help exclude other sources of low back pain. Magnetic resonance imaging, computed tomography, and bone scans of the sacroiliac joint cannot reliably determine whether the joint is the source of the pain. Controlled analgesic injections of the sacroiliac joint are the most important tool in the diagnosis. Treatment modalities include medications, physical therapy, bracing, manual therapy, injections, radiofrequency denervation, and arthrodesis; however, no published prospective data compare the efficacy of these modalities.

  11. Plant-specific CC-type glutaredoxins: functions in developmental processes and stress responses.

    PubMed

    Gutsche, Nora; Thurow, Corinna; Zachgo, Sabine; Gatz, Christiane

    2015-05-01

    Glutaredoxins (GRXs) are small oxidoreductases of the thioredoxin family proteins that can either regulate the thiol redox state of proteins or are linked to iron metabolism because of their ability to incorporate iron-sulfur [2Fe-2S] clusters. Here we review recent research on a land plant-specific class of GRX-like proteins, which are characterized by the conserved CC motif in the active centre. Loss-of-function mutants of CC-type GRXs in Arabidopsis (also named ROXYs), maize, and rice have unraveled a role in floral development, including regulation of organ primordia initiation, control of organ identity gene expression, and progression into meiosis in the male germ line. Other CC-type GRXs play a role in stress responses, most likely through their capacity to regulate nuclear gene expression. Consistently, CC-type GRXs, physically and genetically interact with individual members of the TGA transcription factor family. One of the challenges in the future is to unravel whether ROXYs control the redox state of TGA factors or other yet unknown target proteins or whether they regulate gene expression through other processes. Other intriguing questions concern the original function of the first CC-type GRXs in basal land plants and their potential contribution to the extremely successful radiation of angiosperms.

  12. Joint Program Management Handbook

    DTIC Science & Technology

    1994-12-01

    the Engieermg and Manufacuring Devopment Phase. Nfilestoae HI- Develommen Annros Devopment approval marks a significant step for any program, but it is...to review concept formulaton. Systems Engilneertn As with service programs, systems engineering in joint program management is an essential tool . I...MANAGEMENT HANDBOOK On=e wd Umawtaiutt As discussed in Chapter 7, systems analysis of relationships is a usef tool for joint program managers. The joint

  13. Characterization of carbapenem-resistant Acinetobacter baumannii in Brazil (2008-2011): countrywide spread of OXA-23-producing clones (CC15 and CC79).

    PubMed

    Chagas, Thiago Pavoni Gomes; Carvalho, Karyne Rangel; de Oliveira Santos, Ivson Cassiano; Carvalho-Assef, Ana Paula D'Alincourt; Asensi, Marise Dutra

    2014-08-01

    The study investigated the genetic relationship of carbapenem-resistant Acinetobacter baumannii clinical isolated from inpatients during 2008-2011 from 11 Brazilian states. Antimicrobial susceptibility profile was determined by disc diffusion method and Etest. Polymerase chain reaction was applied for carbapenemase genes, and ISAba1. Isolates were subjected to pulsed field gel electrophoresis (PFGE) and multilocus sequence typing (MLST) for molecular typing. Most of the isolates showed high resistance rates to antibiotics tested. The blaOXA-51-like gene was found in all isolates, and 146 (94.2%) isolates were positive for blaOXA-23-like. In the most OXA-23-producing isolates, the blaOXA-23-like gene was accompanied by ISAba1. A total of 146 OXA-23-producing isolates were clustered into 28 genotypes by PFGE. Molecular analysis by MLST identified 13 sequence types (STs). The most prevalent PFGE profiles were designated as ST15 (CC15), ST1 (CC1), and ST79 (CC79). This study showed the widespread of clonal complexes of A. baumannii harboring the blaOXA-23-like gene in different Brazilian states.

  14. Therapeutic Targeting of CC Ligand 21 or CC Chemokine Receptor 7 Abrogates Pulmonary Fibrosis Induced by the Adoptive Transfer of Human Pulmonary Fibroblasts to Immunodeficient Mice

    PubMed Central

    Pierce, Elizabeth M.; Carpenter, Kristin; Jakubzick, Claudia; Kunkel, Steven L.; Flaherty, Kevin R.; Martinez, Fernando J.; Hogaboam, Cory M.

    2007-01-01

    Idiopathic interstitial pneumonias (IIPs) are a collection of pulmonary fibrotic diseases of unknown etiopathogenesis. CC chemokine receptor 7 (CCR7) is expressed in IIP biopsies and primary fibroblast lines, but its role in pulmonary fibrosis was not previously examined. To study the in vivo role of CCR7 in a novel model of pulmonary fibrosis, 1.0 × 106 primary fibroblasts grown from idiopathic pulmonary fibrosis/usual interstitial pneumonia, nonspecific interstitial pneumonia, or histologically normal biopsies were injected intravenously into C.B-17 severe combined immunodeficiency (SCID)/beige (bg) mice. At days 35 and 63 after idiopathic pulmonary fibrosis/usual interstitial pneumonia fibroblast injection, patchy interstitial fibrosis and increased hydroxyproline were present in the lungs of immunodeficient mice. Adoptively transferred nonspecific interstitial pneumonia fibroblasts caused a more diffuse interstitial fibrosis and increased hydroxyproline levels at both times, but injected normal human fibroblasts did not induce interstitial remodeling changes in C.B-17SCID/bg mice. Systemic therapeutic immunoneutralization of either human CCR7 or CC ligand 21, its ligand, significantly attenuated the pulmonary fibrosis in groups of C.B-17SCID/bg mice that received either type of IIP fibroblasts. Thus, the present study demonstrates that pulmonary fibrosis is initiated by the intravenous introduction of primary human fibroblast lines into immunodeficient mice, and this fibrotic response is dependent on the interaction between CC ligand 21 and CCR7. PMID:17392156

  15. Assessing the Adequacy of Coverage of Joint Command and Control in the Capstone Concept for Joint Operations

    DTIC Science & Technology

    2007-02-01

    move to the edge, making the lowest-level organizations joint and empowering them. Still other trends were cited: 1) There will be a “ market -based...C o m m ande rs to A ntic ip ate and b e P roac tive ag ains t re ac tive thre ats • Harm o nizatio n and Inte ro pe rab ility with

  16. Acromioclavicular joint dislocation with associated brachial plexus injury

    PubMed Central

    Gallagher, Charles Alexander; Blakeney, William; Zellweger, René

    2014-01-01

    We present the case of a 32-year-old female who sustained a left acromioclavicular (AC) joint type V injury and brachial plexus injury. The patient's AC joint injury was identified 6 days after she was involved in a motorbike accident where she sustained multiple other injuries. She required operative fixation of the AC joint using a locking compression medial proximal tibial plate. At 3 months post operatively, the patient was found to have a subluxed left shoulder as a result of an axonal injury to the upper trunk of the brachial plexus. In addition, the tibial plate had cut out. The plate was subsequently removed. At 8 months the glenohumeral articulation had been restored and the patient had clinically regained significant shoulder function. After 15 months the patient was pain free and could complete all her activities of daily living without impediment. She returned to playing competitive pool after 24 months. PMID:24855076

  17. [Chronic knee joint discomfort].

    PubMed

    Wittke, R

    2005-06-23

    Chronic pain in the knee joint is frequently a sign of arthrosis in adults. This must be clearly differentiated from other knee problems. Patellofemoral stress syndrome (occurs mostly in young people) and arthritis with effusion in the knee joint after long and mostly unusual stress also allow only a reduced function of the knee joint. However, even when the knee joint is still fully functional, chronic problems could already exist: For example, for joggers, iliotibial band friction syndrome (runner's knee) or after high unphysiological stress, patellar tendinopathy (jumper's knee). These must be differentiated from pes anserinus syndrome and a plica mediopatellaris.

  18. Joint Attention in Parent-Child Dyads Involving Children with Selective Mutism: A Comparison between Anxious and Typically Developing Children

    ERIC Educational Resources Information Center

    Nowakowski, Matilda E.; Tasker, Susan L.; Cunningham, Charles E.; McHolm, Angela E.; Edison, Shannon; St. Pierre, Jeff; Boyle, Michael H.; Schmidt, Louis A.

    2011-01-01

    Although joint attention processes are known to play an important role in adaptive social behavior in typical development, we know little about these processes in clinical child populations. We compared early school age children with selective mutism (SM; n = 19) versus mixed anxiety (MA; n = 18) and community controls (CC; n = 26) on joint…

  19. The Feasibility of Applying AC Driven Low-Temperature Plasma for Multi-Cycle Detonation Initiation

    NASA Astrophysics Data System (ADS)

    Zheng, Dianfeng

    2016-11-01

    Ignition is a key system in pulse detonation engines (PDE). As advanced ignition methods, nanosecond pulse discharge low-temperature plasma ignition is used in some combustion systems, and continuous alternating current (AC) driven low-temperature plasma using dielectric barrier discharge (DBD) is used for the combustion assistant. However, continuous AC driven plasmas cannot be used for ignition in pulse detonation engines. In this paper, experimental and numerical studies of pneumatic valve PDE using an AC driven low-temperature plasma igniter were described. The pneumatic valve was jointly designed with the low-temperature plasma igniter, and the numerical simulation of the cold-state flow field in the pneumatic valve showed that a complex flow in the discharge area, along with low speed, was beneficial for successful ignition. In the experiments ethylene was used as the fuel and air as oxidizing agent, ignition by an AC driven low-temperature plasma achieved multi-cycle intermittent detonation combustion on a PDE, the working frequency of the PDE reached 15 Hz and the peak pressure of the detonation wave was approximately 2.0 MPa. The experimental verifications of the feasibility in PDE ignition expanded the application field of AC driven low-temperature plasma. supported by National Natural Science Foundation of China (No. 51176001)

  20. Extinction coefficient of H2CC(3B2) at 137 nm

    NASA Technical Reports Server (NTRS)

    Fahr, A.; Laufer, A. H.

    1985-01-01

    In spite of the conduction of numerous studies regarding the vinylidene free radical, its role and importance as a reactive intermediate is not well characterized. Laufer (1980, 1983) has reported the absorption spectrum of metastable H2CC(3B2), the lowest excited state, in the vacuum ultraviolet and has measured several aspects of its quenching properties. The present study provides a measurement of the extinction coefficient of H2CC(3B2). Knowledge of the vinylidene concentration is required to convert readily available absorption data into an extinction coefficient or cross section. In the current work, the H2CC(3B2) concentration was determined in an investigation of the photodissociation of vinyl chloride.

  1. Kinetics of the C-C bond beta scission reactions in alkyl radicals.

    PubMed

    Ratkiewicz, Artur

    2011-09-07

    High pressure limits of thermal rate constants of four C-C bond beta scission reactions of propyl, 1-butyl, 2-butyl and isobutyl radicals were calculated using the canonical variational transition state theory (CVT) with a multi-dimensional small-curvature tunneling (SCT) correction over the temperature range of 300-3000 K. The CCSD(T)/cc-pVDZ//BH&HLYP/cc-pVDZ method was used to provide necessary potential energy surface information. Rate constants for these reactions were used to extrapolate rate constants for reactions in larger alkyls where experimental data are available using the Reaction Class Transition State Theory (RC-TST). Excellent agreement with experimental data confirms the validity of the RC-TST methodology and the accuracy of the calculated kinetic data in this study.

  2. Energy Materials Coordinating Committee (EMaCC): Annual technical report, fiscal year 1993

    SciTech Connect

    Not Available

    1994-07-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1993 and describes the materials research programs of various offices and divisions within the Department. The program descriptions consist of a funding summary for each Assistant Secretary office and the Office of Energy Research, and detailed project summaries with project goals and accomplishments. The FY 1993 budget summary table for DOE Materials Activities in each of the programs is presented.

  3. Genetic transformation of marine cyanobacterium Synechococcus sp. CC9311 (Cyanophyceae) by electroporation

    NASA Astrophysics Data System (ADS)

    Chen, Huaxin; Lin, Hanzhi; Jiang, Peng; Li, Fuchao; Qin, Song

    2013-03-01

    Synechococcus sp. CC9311 is a marine cyanobacterium characterized by type IV chromatic acclimation (CA). A genetic transformation system was developed as a first step to elucidate the molecular mechanism of CA. The results show that Synechococcus sp. CC9311 cells were sensitive to four commonly used antibiotics: ampicillin, kanamycin, spectinomycin, and chloramphenicol. An integrative plasmid to disrupt the putative phycoerythrin lyase gene mpeV, using a kanamycin resistance gene as selectable marker, was constructed by recombinant polymerase chain reaction. The plasmid was then transformed into Synechococcus sp. CC9311 via electroporation. High transformation efficiency was achieved at a field strength of 2 kV/cm. DNA analysis showed that mpeV was fully disrupted following challenge of the transformants with a high concentration of kanamycin. In addition, the transformants that displayed poor growth on agar SN medium could be successfully plated on agarose SN medium.

  4. Acetoacetyl Coenzyme A Reductase and Polyhydroxybutyrate Synthesis in Rhizobium (Cicer) sp. Strain CC 1192

    PubMed Central

    Chohan, Shahid N.; Copeland, Les

    1998-01-01

    Biochemical controls that regulate the biosynthesis of poly-3-hydroxybutyrate (PHB) were investigated in Rhizobium (Cicer) sp. strain CC 1192. This species is of interest for studying PHB synthesis because the polymer accumulates to a large extent in free-living cells but not in bacteroids during nitrogen-fixing symbiosis with chickpea (Cicer arietinum L.) plants. Evidence is presented that indicates that CC 1192 cells retain the enzymic capacity to synthesize PHB when they differentiate from the free-living state to the bacteroid state. This evidence includes the incorporation by CC 1192 bacteroids of radiolabel from [14C]malate into 3-hydroxybutyrate which was derived by chemically degrading insoluble material from bacteroid pellets. Furthermore, the presence of an NADPH-dependent acetoacetyl coenzyme A (CoA) reductase, which was specific for R-(−)-3-hydroxybutyryl-CoA and NADP+ in the oxidative direction, was demonstrated in extracts from free-living and bacteroid cells of CC 1192. Activity of this enzyme in the reductive direction appeared to be regulated at the biochemical level mainly by the availability of substrates. The CC 1192 cells also contained an NADH-specific acetoacetyl-CoA reductase which oxidized S-(+)-3-hydroxybutyryl-CoA. A membrane preparation from CC 1192 bacteroids readily oxidized NADH but not NADPH, which is suggested to be a major source of reductant for nitrogenase. Thus, a high ratio of NADPH to NADP+, which could enhance delivery of reductant to nitrogenase, could also favor the reduction of acetoacetyl-CoA for PHB synthesis. This would mean that fine controls that regulate the partitioning of acetyl-CoA between citrate synthase and 3-ketothiolase are important in determining whether PHB accumulates. PMID:9687441

  5. An inflammatory CC chemokine of Cynoglossus semilaevis is involved in immune defense against bacterial infection.

    PubMed

    Li, Yong-xin; Sun, Jin-sheng; Sun, Li

    2011-09-01

    Chemokines are a family of small cytokines that regulate leukocyte migration. Based on the arrangement of the first two cysteine residues, chemokines are classified into four groups called CXC(α), CC(β), C, and CX(3)C. In this study, we identified a CC chemokine, CsCCK1, from half-smooth tongue sole (Cynoglossus semilaevis) and analyzed its biological activity. The deduced amino acid sequence of CsCCK1 contains 111 amino acid residues and is phylogenetically belonging to the CCL19/21/25 group of CC chemokines. CsCCK1 possesses a DCCL motif that is highly conserved among CC chemokines. Quantitative real time RT-PCR analysis showed that the expression of CsCCK1 was relatively abundant in immune organs under normal physiological conditions and was upregulated by experimental infection of a bacterial pathogen. Purified recombinant CsCCK1 (rCsCCK1) induced chemotaxis in peripheral blood leukocytes (PBL) of both tongue sole and turbot (Scophthalmus maximus) in a dose-dependent manner. Mutation of the CC residues in the DCCL motif by serine substitution completely abolished the biological activity of rCsCCK1. When rCsCCK1, but not the mutant protein, was added to the cell culture of PBL, it enhanced cellular resistance against intracellular bacterial infection. Taken together, these results indicate that CsCCK1 is a functional CC chemokine whose biological activity depends on the DCCL motif and that CsCCK1 plays a role in host immune defense against bacterial infection.

  6. Mechanics of Sheeting Joints

    NASA Astrophysics Data System (ADS)

    Martel, S. J.

    2015-12-01

    Physical breakdown of rock across a broad scale spectrum involves fracturing. In many areas large fractures develop near the topographic surface, with sheeting joints being among the most impressive. Sheeting joints share many geometric, textural, and kinematic features with other joints (opening-mode fractures) but differ in that they are (a) discernibly curved, (b) open near the topographic surface, and (c) form subparallel to the topographic surface. Where sheeting joints are geologically young, the surface-parallel compressive stresses are typically several MPa or greater. Sheeting joints are best developed beneath domes, ridges, and saddles; they also are reported, albeit rarely, beneath valleys or bowls. A mechanism that accounts for all these associations has been sought for more than a century: neither erosion of overburden nor high lateral compressive stresses alone suffices. Sheeting joints are not accounted for by Mohr-Coulomb shear failure criteria. Principles of linear elastic fracture mechanics, together with the mechanical effect of a curved topographic surface, do provide a basis for understanding sheeting joint growth and the pattern sheeting joints form. Compressive stresses parallel to a singly or doubly convex topographic surface induce a tensile stress perpendicular to the surface at shallow depths; in some cases this alone could overcome the weight of overburden to open sheeting joints. If regional horizontal compressive stresses, augmented by thermal stresses, are an order of magnitude or so greater than a characteristic vertical stress that scales with topographic amplitude, then topographic stress perturbations can cause sheeting joints to open near the top of a ridge. This topographic effect can be augmented by pressure within sheeting joints arising from water, ice, or salt. Water pressure could be particularly important in helping drive sheeting joints downslope beneath valleys. Once sheeting joints have formed, the rock sheets between

  7. Measurements of the absolute branching fractions of B+/- --> K+/-X(cc).

    PubMed

    Aubert, B; Barate, R; Boutigny, D; Couderc, F; Karyotakis, Y; Lees, J P; Poireau, V; Tisserand, V; Zghiche, A; Grauges, E; Palano, A; Pappagallo, M; Pompili, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Battaglia, M; Breon, A B; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Day, C T; Gill, M S; Gritsan, A V; Groysman, Y; Jacobsen, R G; Kadel, R W; Kadyk, J; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, M T; Wenzel, W A; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Fritsch, M; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Peters, K; Schroeder, T; Steinke, M; Boyd, J T; Burke, J P; Chevalier, N; Cottingham, W N; Cuhadar-Donszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Kyberd, P; Saleem, M; Teodorescu, L; Blinov, A E; Blinov, V E; Bukin, A D; Druzhinin, V P; Golubev, V B; Kravchenko, E A; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Yushkov, A N; Best, D; Bondioli, M; Bruinsma, M; Chao, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M; Mommsen, R K; Roethel, W; Stoker, D P; Buchanan, C; Hartfiel, B L; Weinstein, A J R; Foulkes, S D; Gary, J W; Long, O; Shen, B C; Wang, K; Zhang, L; del Re, D; Hadavand, H K; Hill, E J; MacFarlane, D B; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Mazur, M A; Richman, J D; Verkerke, W; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dubois-Felsmann, G P; Dvoretskii, A; Hitlin, D G; Minamora, J S; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Andreassen, R; Mancinelli, G; Meadows, B T; Sokoloff, M D; Blanc, F; Bloom, P; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nauenberg, U; Olivas, A; Ruddick, W O; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Chen, A; Eckhart, E A; Soffer, A; Toki, W H; Wilson, R J; Zeng, Q; Altenburg, D; Feltresi, E; Hauke, A; Spaan, B; Brandt, T; Brose, J; Dickopp, M; Klose, V; Lacker, H M; Nogowski, R; Otto, S; Petzold, A; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Bernard, D; Bonneaud, G R; Grenier, P; Schrenk, S; Thiebaux, Ch; Vasileiadis, G; Verderi, M; Bard, D J; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Xie, Y; Andreotti, M; Azzolini, V; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Piemontese, L; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; de Sangro, R; Finocchiaro, G; Patteri, P; Peruzzi, I M; Piccolo, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Lo Vetere, M; Macri, M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Won, E; Wu, J; Dubitzky, R S; Langenegger, U; Marks, J; Schenk, S; Uwer, U; Schott, G; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Flack, R L; Gaillard, J R; Nash, J A; Nikolich, M B; Vazquez, W Panduro; Chai, X; Charles, M J; Mader, W F; Mallik, U; Mohapatra, A K; Ziegler, V; Cochran, J; Crawley, H B; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Yi, J; Arnaud, N; Davier, M; Giroux, X; Grosdidier, G; Höcker, A; Le Diberder, F; Lepeltier, V; Lutz, A M; Oyanguren, A; Petersen, T C; Plaszczynski, S; Rodier, S; Roudeau, P; Schune, M H; Stocchi, A; Wormser, G; Cheng, C H; Lange, D J; Simani, M C; Wright, D M; Bevan, A J; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; George, K A; Hutchcroft, D E; Parry, R J; Payne, D J; Schofield, K C; Touramanis, C; Cormack, C M; Di Lodovico, F; Menges, W; Sacco, R; Brown, C L; Cowan, G; Flaecher, H U; Green, M G; Hopkins, D A; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Brown, D; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Edgar, C L; Hodgkinson, M C; Kelly, M P; Lafferty, G D; Naisbit, M T; Williams, J C; Chen, C; Hulsbergen, W D; Jawahery, A; Kovalskyi, D; Lae, C K; Roberts, D A; Simi, G; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Kofler, R; Koptchev, V B; Li, X; Moore, T B; Saremi, S; Staengle, H; Willocq, S; Cowan, R; Koeneke, K; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; Kim, H; Patel, P M; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Reidy, J; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Taras, P; Viaud, B; Nicholson, H; Cavallo, N; De Nardo, G; Fabozzi, F; Gatto, C; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Bulten, H; Raven, G; Snoek, H L; Wilden, L; Jessop, C P; Losecco, J M; Allmendinger, T; Benelli, G; Gan, K K; Honscheid, K; Hufnagel, D; Jackson, P D; Kagan, H; Kass, R; Pulliam, T; Rahimi, A M; Ter-Antonyan, R; Wong, Q K; Brau, J; Frey, R; Igonkina, O; Lu, M; Potter, C T; Sinev, N B; Strom, D; Strube, J; Torrence, E; Galeazzi, F; Margoni, M; Morandin, M; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Benayoun, M; Briand, H; Chauveau, J; David, P; Del Buono, L; de la Vaissière, Ch; Hamon, O; John, M J J; Leruste, Ph; Malclès, J; Ocariz, J; Roos, L; Therin, G; Behera, P K; Gladney, L; Guo, Q H; Panetta, J; Biasini, M; Covarelli, R; Pacetti, S; Pioppi, M; Angelini, C; Batignani, G; Bettarini, S; Bucci, F; Calderini, G; Carpinelli, M; Cenci, R; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Morganti, M; Neri, N; Paoloni, E; Rama, M; Rizzo, G; Walsh, J; Haire, M; Judd, D; Wagoner, D E; Biesiada, J; Danielson, N; Elmer, P; Lau, Y P; Lu, C; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; D'Orazio, A; Marco, E Di; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Gioi, L Li; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Tehrani, F Safai; Voena, C; Schröder, H; Wagner, G; Waldi, R; Adye, T; De Groot, N; Franek, B; Gopal, G P; Olaiya, E O; Wilson, F F; Aleksan, R; Emery, S; Gaidot, A; Ganzhur, S F; Graziani, G; de Monchenault, G Hamel; Kozanecki, W; Legendre, M; London, G W; Mayer, B; Vasseur, G; Yèche, Ch; Zito, M; Purohit, M V; Weidemann, A W; Wilson, J R; Yumiceva, F X; Abe, T; Allen, M T; Aston, D; Bartoldus, R; Berger, N; Boyarski, A M; Buchmueller, O L; Claus, R; Coleman, J P; Convery, M R; Cristinziani, M; Dingfelder, J C; Dong, D; Dorfan, J; Dujmic, D; Dunwoodie, W; Fan, S; Field, R C; Glanzman, T; Gowdy, S J; Hadig, T; Halyo, V; Hast, C; Hryn'ova, T; Innes, W R; Kelsey, M H; Kim, P; Kocian, M L; Leith, D W G S; Libby, J; Luitz, S; Luth, V; Lynch, H L; Marsiske, H; Messner, R; Muller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Va'vra, J; van Bakel, N; Weaver, M; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Roat, C; Ahmed, M; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Satpathy, A; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Bona, M; Gallo, F; Gamba, D; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Vitale, L; Martinez-Vidal, F; Panvini, R S; Banerjee, Sw; Bhuyan, B; Brown, C M; Fortin, D; Hamano, K; Kowalewski, R; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Band, H R; Chen, X; Cheng, B; Dasu, S; Datta, M; Eichenbaum, A M; Flood, K T; Graham, M; Hollar, J J; Johnson, J R; Kutter, P E; Li, H; Liu, R; Mellado, B; Mihalyi, A; Pan, Y; Pierini, M; Prepost, R; Tan, P; Wu, S L; Yu, Z; Neal, H

    2006-02-10

    We study the two-body decays of B+/- mesons to K+/- and a charmonium state X(cc) in a sample of 210.5 fb(-1) of data from the BABAR experiment. We perform measurements of absolute branching fractions beta(B+/- --> K+/-X(cc)) using a missing mass technique, and report several new or improved results. In particular, the upper limit beta(B+/- --> K+/- X(3872)) < 3.2 x 10(-4) at 90% C.L. and the inferred lower limit beta(X(3872)J/psipi+ pi-) > 4.2% will help in understanding the nature of the recently discovered X(3872).

  8. Effects of rhCC10 as a Post-Treatment in Mice Challenged with Phosgene

    DTIC Science & Technology

    2005-03-01

    cause non- cardiogenic pulmonary edema and possibly death, within 6-24 hours after exposure.4 In this study we evaluated the therapeutic efficacy of a...therapy for phosgene. 15. SUBJECT TERMS rhCC10, lung protein, mucosal host defense proteins, phosgene, pulmonary edema , pulmonary inflammation, anti...of 5 mg/kg, 10 mg/kg, and 20 mg/kg 4 ofrhCC10 was also not able to show an improvement from saline in pulmonary edema formation. 120- - Phosgene

  9. Effects of Tobacco Smoke (TS) on Growth of Clear Cell Renal Cell Carcinoma (ccRCC)

    DTIC Science & Technology

    2015-10-01

    changes in kidney /tumor tissues and promote ccRCC tumor growth. Because of a high prevalence of smoking in active military personnel and veterans...goals? The performed work is focused on Task 1 and Task 6, i.e. collection of tumor/ kidney specimens from VA patients smokers and non-smokers and on...Task 2, i.e. DNA and RNA extraction from tumors and kidneys and are in the process of sequencing VHL gene as well as other ccRCC tumor supressors

  10. Energy Materials Coordinating Committee (EMaCC). Annual Technical Report, Fiscal Year 2000

    SciTech Connect

    none,

    2001-07-31

    The Energy Materials Coordinating Committee Annual Report (attached, DOE/SC-0040) provides an annual summary of non-classified materials-related research programs supported by various elements within the Department of Energy. The EMaCC Annual Report is a useful working tool for project managers who want to know what is happening in other divisions, and it provides a guide for persons in industry and academia to the materials program within the Department. The major task of EMaCC this year was to make the Annual Report a more user-friendly document by removing redundant program information and shortening the project summaries.

  11. From Saturated BN Compounds to Isoelectronic BN/CC Counterparts: An Insight from Computational Perspective.

    PubMed

    Sagan, Filip; Piękoś, Łukasz; Andrzejak, Marcin; Mitoraj, Mariusz Paweł

    2015-10-19

    In the present study, the inorganic analogues of alkanes as well as their isoelectronic BN/CC counterparts that bridge the gap between organic and inorganic chemistry are comparatively studied on the grounds of static DFT and Car-Parrinello molecular dynamics simulations. The BN/CC butanes CH3 CH2 BH2 NH3 , BH3 CH2 NH2 CH3 , and NH3 CH2 BH2 CH3 were considered and compared with their isoelectronic counterparts NH3 BH2 NH2 BH3 and CH3 CH2 CH2 CH3 . In addition, systematical replacement of the NH2 BH2 fragment by the isoelectronic CH2 CH2 moiety is studied in the molecules H3 N(NH2 BH2 )3-m (CH2 CH2 )m BH3 (for m=0, 1, 2, or 3) and H3 N(NH2 BH2 )2-m (CH2 CH2 )m BH3 (for m=0, 1, or 2). The DFT and Car-Parrinello simulations show that the isosteres of the BN/CC butanes CH3 CH2 BH2 NH3 , BH3 CH2 NH2 CH3 , and NH3 CH2 BH2 CH3 and of larger oligomers of the type (BN)k (CC)l where k≥l are stable compounds. The BN/CC butane H3 NCH2 CH2 BH3 spontaneously produces molecular hydrogen at room temperature. The reaction, prompted by very strong dihydrogen bonding NH⋅⋅⋅HB, undergoes through the neutral, hypervalent, pentacoordinated boron dihydrogen complex RBH2 (H2 ) [R=(CH2 CH2 )n NH2 ]. The calculations suggest that such intermediate and the other BN/CC butanes CH3 CH2 BH2 NH3 , BH3 CH2 NH2 CH3 , and NH3 CH2 BH2 CH3 as well as larger BN/CC oligomers are viable experimentally. A simple recipe for the synthesis of CH3 CH2 BH2 NH3 is proposed. The strength of the dihydrogen bonding appeared to be crucial for the overall stability of the saturated BN/CC derivatives.

  12. Onto-CC: a web server for identifying Gene Ontology conceptual clusters

    PubMed Central

    Romero-Zaliz, R.; del Val, C.; Cobb, J. P.; Zwir, I.

    2008-01-01

    The Gene Ontology (GO) vocabulary has been extensively explored to analyze the functions of coexpressed genes. However, despite its extended use in Biology and Medical Sciences, there are still high levels of uncertainty about which ontology (i.e. Molecular Process, Cellular Component or Molecular Function) should be used, and at which level of specificity. Moreover, the GO database can contain incomplete information resulting from human annotations, or highly influenced by the available knowledge about a specific branch in an ontology. In spite of these drawbacks, there is a trend to ignore these problems and even use GO terms to conduct searches of gene expression profiles (i.e. expression + GO) instead of more cautious approaches that just consider them as an independent source of validation (i.e. expression versus GO). Consequently, propagating the uncertainty and producing biased analysis of the required gene grouping hypotheses. We proposed a web tool, Onto-CC, as an automatic method specially suited for independent explanation/validation of gene grouping hypotheses (e.g. coexpressed genes) based on GO clusters (i.e. expression versus GO). Onto-CC approach reduces the uncertainty of the queries by identifying optimal conceptual clusters that combine terms from different ontologies simultaneously, as well as terms defined at different levels of specificity in the GO hierarchy. To do so, we implemented the EMO-CC methodology to find clusters in structural databases [GO Directed acyclic Graph (DAG) tree], inspired on Conceptual Clustering algorithms. This approach allows the management of optimal cluster sets as potential parallel hypotheses, guided by multiobjective/multimodal optimization techniques. Therefore, we can generate alternative and, still, optimal explanations of queries that can provide new insights for a given problem. Onto-CC has been successfully used to test different medical and biological hypotheses including the explanation and prediction of

  13. Comparison of the A-Cc curve fitting methods in determining maximum ribulose 1.5-bisphosphate carboxylase/oxygenase carboxylation rate, potential light saturated electron transport rate and leaf dark respiration.

    PubMed

    Miao, Zewei; Xu, Ming; Lathrop, Richard G; Wang, Yufei

    2009-02-01

    A review of the literature revealed that a variety of methods are currently used for fitting net assimilation of CO2-chloroplastic CO2 concentration (A-Cc) curves, resulting in considerable differences in estimating the A-Cc parameters [including maximum ribulose 1.5-bisphosphate carboxylase/oxygenase (Rubisco) carboxylation rate (Vcmax), potential light saturated electron transport rate (Jmax), leaf dark respiration in the light (Rd), mesophyll conductance (gm) and triose-phosphate utilization (TPU)]. In this paper, we examined the impacts of fitting methods on the estimations of Vcmax, Jmax, TPU, Rd and gm using grid search and non-linear fitting techniques. Our results suggested that the fitting methods significantly affected the predictions of Rubisco-limited (Ac), ribulose 1,5-bisphosphate-limited (Aj) and TPU-limited (Ap) curves and leaf photosynthesis velocities because of the inconsistent estimate of Vcmax, Jmax, TPU, Rd and gm, but they barely influenced the Jmax : Vcmax, Vcmax : Rd and Jmax : TPU ratio. In terms of fitting accuracy, simplicity of fitting procedures and sample size requirement, we recommend to combine grid search and non-linear techniques to directly and simultaneously fit Vcmax, Jmax, TPU, Rd and gm with the whole A-Cc curve in contrast to the conventional method, which fits Vcmax, Rd or gm first and then solves for Vcmax, Jmax and/or TPU with V(cmax), Rd and/or gm held as constants.

  14. Joint Newspaper Operating Agreements.

    ERIC Educational Resources Information Center

    Parsons, Marie

    The number of competing daily newspapers in American cities has dwindled until only about 50 cities boast two papers. Of the newspapers in those cities, 23 now maintain separate editorial operations but have joint printing, advertising, and circulation departments. The concept of joint operation is 50 years old, dating from the Depression years…

  15. Jointness, A Selected Bibliography.

    DTIC Science & Technology

    1997-02-01

    Joint warfare is team warfare. Joint Pub 1 purple- suiter -An officer assigned to duty on a staff where no particu- lar service predominates. This may...Force Quarterly, no. 5 (Summer 1994): 64-70. Winton, Harold R. "Partnership and Tension: The Army and Air Force Between Vietnam and Desert Shield

  16. AC-DC Power Processor, Type I.

    DTIC Science & Technology

    1979-11-01

    LLI- >- Crto C) UU- LIJj LLJLJ Q 0d CC LJ CC LA exLLIW LL-13- c c. System Waveforms. Figure 6 shows the control system waveforms which includes the...C mJJ9 aJ mi oli o. o o a, aO ~ ~ ’ ’ 0 C. 1.0 r-.J a, 0) a, m- a, 00 00.0 0% (-> ) V - C - q r I 0D 0 0DC < cc 1.0 W 000 a LO~ r- LO Ul) U) Lo UO...o tt ; q ; t .. .. .. I -- ... ...... 0.. .. . . .. . . ~i31b~dI1Ik. ... ... LodA 3dV~~~~.. ....2 ..ZLI ~ ~O 63l t iJ w il. 4 N ... ... . . 4

  17. Jointness for the Rest of Us: Reforming Joint Professional Development

    DTIC Science & Technology

    2016-06-10

    Vision 2020 (JV 2020 ) is the conceptual template established to guide the transformation of America’s Armed Forces. According to this template, the...of Staff. Joint Vision 2020 , (Washington DC. Office of the Chairman of the Joint Chiefs of Staff Joint Electronic Library, February 2001):1. 2 Ibid...Staffs of Staff, 2011. __________. Joint Vision 2020 .Washington DC. Office of the Chairman of the Joint Chiefs of Staff Joint Electronic Library

  18. Three phase AC motor controller

    DOEpatents

    Vuckovich, Michael; Wright, Maynard K.; Burkett, John P.

    1984-03-20

    A motor controller for a three phase AC motor (10) which is adapted to operate bidirectionally from signals received either from a computer (30) or a manual control (32). The controller is comprised of digital logic circuit means which implement a forward and reverse command signal channel (27, 29) for the application of power through the forward and reverse power switching relays (16, 18, 20, 22). The digital logic elements are cross coupled to prevent activation of both channels simultaneously and each includes a plugging circuit (65, 67) for stopping the motor upon the removal of control signal applied to one of the two channels (27, 29) for a direction of rotation desired. Each plugging circuit (65, 67) includes a one-shot pulse signal generator (88, 102) which outputs a single pulse signal of predetermined pulsewidth which is adapted to inhibit further operation of the application of power in the channel which is being activated and to apply a reversal command signal to the other channel which provides a reversed phase application of power to the motor for a period defined by the pulse-width output of the one-shot signal generator to plug the motor (10) which will then be inoperative until another rotational command signal is applied to either of the two channels.

  19. Generation of liquid metal structures of high aspect ratio by application of an ac magnetic field

    NASA Astrophysics Data System (ADS)

    Andreev, Oleg; Pothérat, Alban; Thess, André

    2010-06-01

    We study how the shape of parts obtained through the LASER cladding process can be controlled by application of an ac magnetic field by means of two simple physical models: a numerical and an experimental one. More specifically, we show that straight metallic joints of high aspect ratio can be obtained by using inductors of triangular cross-section that concentrate electromagnetic forces at the bottom of the joint. The effect is first demonstrated on a numerical model for an infinitely long joint such as: we illustrate how the joint shape can be controlled by varying the inclination of the inductor and for a magnetic Bond number Bom=60 (which measures the ratio of electromagnetic to capillary forces), we obtain a joint of aspect ratio up to 7.2. We further find that inductor angles in the range 15°-25° lead to joint side faces that are close to vertical. These findings are then verified experimentally by placing a liquid metal drop in a purpose built inductor of triangular cross-section. We find a good agreement between the theoretical prediction of our two-dimensional model and the real three-dimensional drop. For the highest magnetic Bond number our generator could deliver, Bom=20.19, we achieved a drop aspect ratio of 2.73.

  20. Ablative property of HfC-based multilayer coating for C/C composites under oxy-acetylene torch

    NASA Astrophysics Data System (ADS)

    Wang, Yong-Jie; Li, He-Jun; Fu, Qian-Gang; Wu, Heng; Yao, Dong-Jia; Wei, Bing-Bo

    2011-03-01

    To improve ablation resistance of C/C composites, HfC-based coating and SiC coating were prepared on the surface of C/C composites by chemical vapor deposition. The coating exhibits dense surface and outstanding anti-ablation ability. Compared with uncoated C/C, the linear and mass ablation rates of the coated C/C decreased by 33.3% and 66.7%, respectively, after ablation for 20 s. The residual oxides can prevent oxygen from diffusing inwardly; large amounts of heat can be taken away by the gas generated during ablation, which is also helpful for protection.

  1. A YAC contig of the human CC chemokine genes clustered on chromosome 17q11.2

    SciTech Connect

    Naruse, Kuniko |; Nomiyama, Hisayuki; Miura, Retsu

    1996-06-01

    CC chemokines are cytokines that attract and activate leukocytes. The human genes for the CC chemokines are clustered on chromosome 17. To elucidate the genomic organization of the CC chemokine genes, we constructed a YAC contig comprising 34 clones. The contig was shown to contain all 10 CC chemokine genes reported so far, except for one gene whose nucleotide sequence is not available. The contig also contains 4 CC chemokine-like genes, which were deposited in GenBank as ESTs and are here referred to as NCC-1, NCC-2, NCC-3, and NCC-4. Within the contig, the CC chemokine genes were localized in two regions. In addition, the CC chemokine genes were localized in two regions. In addition, the CC chemokine genes were more precisely mapped on chromosome 17q11.2 using a somatic cell hybrid cell DNA panel containing various portions of human chromosome 17. Interestingly, a reciprocal translocation t(Y;17) breakpoint, contained in the hybrid cell line Y1741, lay between the two chromosome 17 chemokine gene regions covered by our YAC contig. From these results, the order and the orientation of CC chemokine genes on chromosome 17 were determined as follows: centromere-neurofibromatosis 1-(MCP-3, MCP-1, NCC-1, I-309)-Y1741 breakpoint-RANTES-(LD78{gamma}, AT744.2, LD78{beta})-(NCC-3, NCC-2, AT744.1, LD78{alpha})-NCC-4-retinoic acid receptor {alpha}-telomere. 22 refs., 1 fig., 2 tabs.

  2. Memory effect in ac plasma displays

    NASA Astrophysics Data System (ADS)

    Szlenk, K.; Obuchowicz, E.

    1993-10-01

    The bistable or `memory' mode of operation of an ac plasma display panel is presented. The difference between dc and ac plasma panel operation from the point of view of memory function is discussed. The graphic ac plasma display with thin film Cr-Cu-Cr electrodes was developed in OBREP and its basic parameters are described. It consists of 36 X 59 picture elements, its outer dimensions are: 76 X 52 mm2 and the screen size is: 49 X 30 mm2. The different dielectric glass materials were applied as dielectric layers and the influence of the properties of these materials on display parameters and memory function was investigated.

  3. Superconductor coil geometry and ac losses

    NASA Technical Reports Server (NTRS)

    Pierce, T. V., Jr.; Zapata, R. N.

    1976-01-01

    An empirical relation is presented which allows simple computation of volume-averaged winding fields from central fields for coils of small rectangular cross sections. This relation suggests that, in certain applications, ac-loss minimization can be accomplished by use of low winding densities, provided that hysteresis losses are independent of winding density. The ac-loss measurements on coils wound of twisted multifilamentary composite superconductors show no significant dependence on ac losses on winding density, thus permitting the use of winding density as an independent design parameter in loss minimization.

  4. The Role of CC-Chemokines in the Regulation of Angiogenesis

    PubMed Central

    Ridiandries, Anisyah; Tan, Joanne T. M.; Bursill, Christina A.

    2016-01-01

    Angiogenesis, the formation of new blood vessels, is critical for survival and in the regenerative response to tissue injury or ischemia. However, in diseases such as cancer and atherosclerosis, inflammation can cause unregulated angiogenesis leading to excessive neovascularization, which exacerbates disease. Current anti-angiogenic therapies cause complete inhibition of both inflammatory and ischemia driven angiogenesis causing a range of side effects in patients. Specific inhibition of inflammation-driven angiogenesis would therefore be immensely valuable. Increasing evidence suggests that the CC-chemokine class promotes inflammation-driven angiogenesis, whilst there is little evidence for a role in ischemia-mediated angiogenesis. The differential regulation of angiogenesis by CC-chemokines suggests it may provide an alternate strategy to treat angiogenesis associated pathological diseases. The focus of this review is to highlight the significant role of the CC-chemokine class in inflammation, versus ischemia driven angiogenesis, and to discuss the related pathologies including atherosclerosis, cancer, and rheumatoid arthritis. We examine the pros and cons of anti-angiogenic therapies currently in clinical trials. We also reveal novel therapeutic strategies that cause broad-spectrum inhibition of the CC-chemokine class that may have future potential for the specific inhibition of inflammatory angiogenesis. PMID:27834814

  5. 46. Construction Drawing 2042F163, entitled Power House Longitudinal Section CC ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. Construction Drawing 2042-F-163, entitled Power House- Longitudinal Section C-C through Boiler Room. (Original drawing, in the possession of Wyre Dick and Company, Livingston, New Jersey.) - Central Railroad of New Jersey, Engine Terminal, Jersey City, Hudson County, NJ

  6. Calculation of excitation energies from the CC2 linear response theory using Cholesky decomposition

    SciTech Connect

    Baudin, Pablo; Marín, José Sánchez; Cuesta, Inmaculada García; Sánchez de Merás, Alfredo M. J.

    2014-03-14

    A new implementation of the approximate coupled cluster singles and doubles CC2 linear response model is reported. It employs a Cholesky decomposition of the two-electron integrals that significantly reduces the computational cost and the storage requirements of the method compared to standard implementations. Our algorithm also exploits a partitioning form of the CC2 equations which reduces the dimension of the problem and avoids the storage of doubles amplitudes. We present calculation of excitation energies of benzene using a hierarchy of basis sets and compare the results with conventional CC2 calculations. The reduction of the scaling is evaluated as well as the effect of the Cholesky decomposition parameter on the quality of the results. The new algorithm is used to perform an extrapolation to complete basis set investigation on the spectroscopically interesting benzylallene conformers. A set of calculations on medium-sized molecules is carried out to check the dependence of the accuracy of the results on the decomposition thresholds. Moreover, CC2 singlet excitation energies of the free base porphin are also presented.

  7. Students' Learning with the Connected Chemistry (CC1) Curriculum: Navigating the Complexities of the Particulate World

    ERIC Educational Resources Information Center

    Levy, Sharona T.; Wilensky, Uri

    2009-01-01

    The focus of this study is students' learning with a Connected Chemistry unit, CC1 (denotes Connected Chemistry, chapter 1), a computer-based environment for learning the topics of gas laws and kinetic molecular theory in chemistry (Levy and Wilensky 2009). An investigation was conducted into high-school students' learning with Connected…

  8. Re-mediated C-C coupling of pyridines and imidazoles.

    PubMed

    Espinal Viguri, Maialen; Huertos, Miguel A; Pérez, Julio; Riera, Lucía; Ara, Irene

    2012-12-19

    Rhenium tricarbonyl complexes with three N-heterocyclic ligands (N-alkylimidazoles or pyridines) undergo deprotonation with KN(SiMe(3))(2) and then oxidation with AgOTf to afford complexes with pyridylimidazole or bipyridine bidentate ligands resulting from deprotonation, C-C coupling and rearomatization.

  9. Imidazole-nitrile or imidazole-isonitrile C-C coupling on rhenium tricarbonyl complexes.

    PubMed

    Viguri, Maialen Espinal; Huertos, Miguel A; Pérez, Julio; Riera, Lucía

    2013-09-23

    Ligand activation: Deprotonation of the nitrile or isonitrile complexes [Re(CO)3(N-RIm)2(L)](+) (N-RIm = N-alkylimidazole; L = N≡CtBu, C≡NtBu) selectively afforded alkylidenamido or iminoacyl derivatives, respectively, in which C-C coupling has occurred. Protonation of the latter complex leads to aminocarbene products.

  10. The Freud-1/CC2D1A family: transcriptional regulators implicated in mental retardation.

    PubMed

    Rogaeva, Anastasia; Galaraga, Kimberly; Albert, Paul R

    2007-10-01

    The CC2D1A gene family consists of two homologous genes, Freud-1/CC2D1A and Freud-2/CC2D1B, that share conserved domains, including several DM14 domains that are specific to this protein family, a C-terminal helix-loop-helix domain, and a C2 calcium-dependent phospholipid binding domain. Although the function of Freud-2 is unknown, Freud-1 has been shown to function as a transcriptional repressor of the serotonin-1A receptor gene that binds to a novel DNA element (FRE, 5'-repressor element). The DNA binding and repressor activities of Freud-1 are inhibited by calcium-calmodulin-dependent protein kinase. Recently, a deletion in the CC2D1A gene has been linked to nonsyndromic mental retardation. This deletion results in the truncation of the helix-loop-helix DNA binding and the C2 domains, crucial for Freud-1 repressor activity, and hence is predicted to generate an inactive or weakly dominant negative protein. The possible mechanisms by which inactivation of Freud-1 could lead to abnormal cortical development and cognitive impairment and the potential roles of Freud-1 gene targets are discussed.

  11. Staphylococcus aureus nasal carriage, virulence traits, antibiotic resistance mechanisms, and genetic lineages in healthy humans in Spain, with detection of CC398 and CC97 strains.

    PubMed

    Lozano, Carmen; Gómez-Sanz, Elena; Benito, Daniel; Aspiroz, Carmen; Zarazaga, Myriam; Torres, Carmen

    2011-08-01

    S. aureus nasal carriage was investigated in 278 healthy humans, determining the antibiotic resistance mechanisms, virulence traits, and genetic lineages of recovered isolates. Nasal samples were cultured in specific media for S. aureus and methicillin-resistant S. aureus (MRSA) recovery. S. aureus was detected in 53 of 278 nasal samples (19.1%): MRSA was found in one sample (0.4%) and methicillin-susceptible S. aureus (MSSA) in the remaining 52 samples. The MRSA isolate was typed as ST1649-t701-agrI-SCCmec-IVc and only exhibited resistance to beta-lactams. A high diversity of spa types (n=37) was identified among the 52 MSSA, identifying 5 new spa-types. Multi-locus sequence typing (MLST) typing was performed in 30 selected MSSA, detecting 16 different sequence types, 2 of them being new. MSSA strains presented agr types I (30.2%), II (30.2%), III (34%), and IV (5.6%). Eleven strains showed erythromycin resistance and harbored different combinations of erm(A), erm(B), erm(C), erm(T), and msr(A) genes. Two strains exhibited ciprofloxacin resistance, and one of them presented amino acid changes in GyrA and GrlA proteins. The presence of 28 genes encoding staphylococcal toxins was investigated by PCR in all 53 S. aureus isolates. The toxic shock syndrome toxin 1 (TSST-1) gene was detected in 15 MSSA isolates (11 of them typed within the clonal complex CC30) and the gene of exfoliative toxin A in 2 strains. Different combinations of enterotoxin genes were identified among S. aureus strains. None of the S. aureus isolates harbored the Panton-Valentine leukocidin gene. Two MSSA presented the sequence-type ST398 [harboring erm(T) gene], and 2 additional isolates were typed as ST97. Interestingly, MSSA CC398 and CC97 isolates were detected. These clonal complexes are associated with food-producing animals.

  12. Arthroscopically Assisted Acromioclavicular and Coracoclavicular Ligament Reconstruction for Chronic Acromioclavicular Joint Instability.

    PubMed

    Martetschläger, Frank; Tauber, Mark; Habermeyer, Peter; Hawi, Nael

    2016-12-01

    Acromioclavicular (AC) joint injuries are common injuries, especially in the young and active, male population. AC joint injuries account for 12% of all injuries of the shoulder girdle in the overall population. Although conservative treatment is recommended for Rockwood type I and type II injuries, there is controversial debate about optimal treatment for type III injuries. High-grade injuries are typically treated operatively to avoid painful sequelae. A vast number of different surgical methods have been described over the past few decades. Recent advances in arthroscopic surgery have enabled the shoulder surgeon to treat acute and chronic AC lesions arthroscopically assisted. Clinical studies have already shown good and reliable results. Although surgeons agree that a biological augmentation is required to minimize the risk of recurrent instability in chronic cases, a gold standard still needs to be defined. We present an arthroscopically assisted biological augmentation technique to reconstruct the AC and coracoclavicular ligaments, protected by a button-suture tape construct for chronic AC joint instability. The presented arthroscopic biological augmentation technique uses less and/or smaller drill holes in the clavicle and coracoid than previously described, thus reducing weakening of the bony structures. At the same time it enhances both horizontal and vertical stability.

  13. Exenatide: AC 2993, AC002993, AC2993A, exendin 4, LY2148568.

    PubMed

    2004-01-01

    Exenatide [AC002993, AC2993A, AC 2993, LY2148568, exendin 4], a glucagon-like peptide-1 (GLP-1) agonist, is a synthetic exendin 4 compound under development with Amylin Pharmaceuticals for the treatment of type 2 diabetes. Both exendin 4 and its analogue, exendin 3, are 39-amino acid peptides isolated from Heloderma horridum lizard venom that have different amino acids at positions 2 and 3, respectively. Exendins are able to stimulate insulin secretion in response to rising blood glucose levels, and modulate gastric emptying to slow the entry of ingested sugars into the bloodstream. Amylin Pharmaceuticals acquired exclusive patent rights for the two exendin compounds (exendin 3 and exendin 4) from the originator, Dr John Eng (Bronx, NY, US). On 20 September 2002, Amylin and Eli Lilly signed a collaborative agreement for the development and commercialisation of exenatide for type 2 diabetes. Under the terms of the agreement, Eli Lilly has paid Amylin a licensing fee of 80 million US dollars and bought Amylin's stock worth 30 million US dollars at 18.69 US dollars a share. After the initial payment, Eli Lilly will pay Amylin up to 85 US dollars million upon reaching certain milestones and also make an additional payment of up to 130 million US dollars upon global commercialisation of exenatide. Both companies will share the US development and commercialisation costs, while Eli Lilly will pick up up to 80% of development costs and all commercialisation costs outside the US. Amylin and Eli Lilly will equally share profit from sales in the US, while Eli Lilly will get 80% of the profit outside the US and Amylin will get the rest. This agreement has also enabled Amylin to train its sales force to co-promote Lilly's human growth hormone Humatrope. Alkermes will receive research and development funding and milestone payments, and also a combination of royalty payments and manufacturing fees based on product sales. Alkermes undertakes the responsibility for the development

  14. Pressure vessel flex joint

    NASA Technical Reports Server (NTRS)

    Kahn, Jon B. (Inventor)

    1992-01-01

    An airtight, flexible joint is disclosed for the interfacing of two pressure vessels such as between the Space Station docking tunnel and the Space Shuttle Orbiter bulkhead adapter. The joint provides for flexibility while still retaining a structural link between the two vessels required due to the loading created by the internal/external pressure differential. The joint design provides for limiting the axial load carried across the joint to a specific value, a function returned in the Orbiter/Station tunnel interface. The flex joint comprises a floating structural segment which is permanently attached to one of the pressure vessels through the use of an inflatable seal. The geometric configuration of the joint causes the tension between the vessels created by the internal gas pressure to compress the inflatable seal. The inflation pressure of the seal is kept at a value above the internal/external pressure differential of the vessels in order to maintain a controlled distance between the floating segment and pressure vessel. The inflatable seal consists of either a hollow torus-shaped flexible bladder or two rolling convoluted diaphragm seals which may be reinforced by a system of straps or fabric anchored to the hard structures. The joint acts as a flexible link to allow both angular motion and lateral displacement while it still contains the internal pressure and holds the axial tension between the vessels.

  15. Energy materials coordinating committee (EMaCC). Annual technical report, fiscal year 2002

    SciTech Connect

    none,

    2003-08-08

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. Topical subcommittees of the EMaCC are responsible for conducting seminars and otherwise facilitating information flow between DOE organizational units in materials areas of particular importance to the Department. The EMaCC Terms of Reference were recently modified and developed into a Charter that was approved on June 5, 2003. As a result of this reorganization, the existing subcommittees were disbanded and new subcommittees are being formed. The EMaCC Charter and the memorandum approving it are presented in the Appendix of this report. The FY 2002 budget summary for DOE Materials Activities is presented on page 8. The distribution of these funds between DOE laboratories, private industry, academia and other organizations is presented in tabular form on page 10. Following the budget summary is a set of detailed program descriptions for the FY 2002 DOE Materials activities. These descriptions are presented according to the organizational structure of the Department. A mission statement, a budget summary listing the project titles and FY 2002 funding, and detailed project summaries are presented for each Assistant Secretary office, the Office of Science, and the National Nuclear Security Administration. The project summaries also provide DOE, laboratory, academic and industrial contacts for each project, as appropriate.

  16. Increased Expression of CC16 in Patients with Idiopathic Pulmonary Fibrosis

    PubMed Central

    Buendía-Roldán, Ivette; Ruiz, Víctor; Sierra, Patricia; Montes, Eduardo; Ramírez, Remedios; Vega, Anita; Salgado, Alfonso; Vargas, Mario H.; Mejía, Mayra; Pardo, Annie; Selman, Moisés

    2016-01-01

    Idiopathic pulmonary fibrosis (IPF) is a devastating disease of unknown etiology. The pathogenic mechanisms are unclear, but evidence indicates that aberrantly activated alveolar epithelial cells secrete a variety of mediators which induce the migration, proliferation and activation of fibroblasts and finally the excessive accumulation of extracellular matrix with the consequent destruction of the lung parenchyma. CC16 (approved symbol SCGB1A1), a putative anti-inflammatory protein produced by “club” cells in the distal airways, has not been evaluated in IPF lungs. In this study, we determined the serum and bronchoalveolar lavage (BAL) levels as well as the lung cell localization of this protein. Also, we explored the usefulness of serum levels of CC16 for the differential diagnosis of IPF (n = 85), compared with non-IPF interstitial lung diseases [chronic hypersensitivity pneumonitis (cHP; n = 85) and connective tissue diseases (CTD-ILD; n = 85)]. CC16 was significantly increased in serum and BAL fluids of IPF patients and was found not only in club cells but also in alveolar epithelial cells. When compared with non-IPF patients and controls, serum levels were significantly increased (p<0.0001). Sensitivity and specificity for CC16 (cut-off 41ng/mL) were 24% and 90%, positive predictive value 56% and negative predictive value 69%. These findings demonstrate that CC16 is upregulated in IPF patients suggesting that may participate in its pathogenesis. Although higher than the serum levels of non-IPF patients it shows modest sensitivity to be useful as a potential biomarker for the differential diagnosis. PMID:27977812

  17. A pair natural orbital implementation of the coupled cluster model CC2 for excitation energies.

    PubMed

    Helmich, Benjamin; Hättig, Christof

    2013-08-28

    We demonstrate how to extend the pair natural orbital (PNO) methodology for excited states, presented in a previous work for the perturbative doubles correction to configuration interaction singles (CIS(D)), to iterative coupled cluster methods such as the approximate singles and doubles model CC2. The original O(N(5)) scaling of the PNO construction is reduced by using orbital-specific virtuals (OSVs) as an intermediate step without spoiling the initial accuracy of the PNO method. Furthermore, a slower error convergence for charge-transfer states is analyzed and resolved by a numerical Laplace transformation during the PNO construction, so that an equally accurate treatment of local and charge-transfer excitations is achieved. With state-specific truncated PNO expansions, the eigenvalue problem is solved by combining the Davidson algorithm with deflation to project out roots that have already been determined and an automated refresh with a generation of new PNOs to achieve self-consistency of the PNO space. For a large test set, we found that truncation errors for PNO-CC2 excitation energies are only slightly larger than for PNO-CIS(D). The computational efficiency of PNO-CC2 is demonstrated for a large organic dye, where a reduction of the doubles space by a factor of more than 1000 is obtained compared to the canonical calculation. A compression of the doubles space by a factor 30 is achieved by a unified OSV space only. Moreover, calculations with the still preliminary PNO-CC2 implementation on a series of glycine oligomers revealed an early break even point with a canonical RI-CC2 implementation between 100 and 300 basis functions.

  18. Broad-Spectrum Inhibition of the CC-Chemokine Class Improves Wound Healing and Wound Angiogenesis

    PubMed Central

    Ridiandries, Anisyah; Bursill, Christina; Tan, Joanne

    2017-01-01

    Angiogenesis is involved in the inflammation and proliferation stages of wound healing, to bring inflammatory cells to the wound and provide a microvascular network to maintain new tissue formation. An excess of inflammation, however, leads to prolonged wound healing and scar formation, often resulting in unfavourable outcomes such as amputation. CC-chemokines play key roles in the promotion of inflammation and inflammatory-driven angiogenesis. Therefore, inhibition of the CC-chemokine class may improve wound healing. We aimed to determine if the broad-spectrum CC-chemokine inhibitor “35K” could accelerate wound healing in vivo in mice. In a murine wound healing model, 35K protein or phosphate buffered saline (PBS, control) were added topically daily to wounds. Cohorts of mice were assessed in the early stages (four days post-wounding) and in the later stages of wound repair (10 and 21 days post-wounding). Topical application of the 35K protein inhibited CC-chemokine expression (CCL5, CCL2) in wounds and caused enhanced blood flow recovery and wound closure in early-mid stage wounds. In addition, 35K promoted neovascularisation in the early stages of wound repair. Furthermore, 35K treated wounds had significantly lower expression of the p65 subunit of NF-κB, a key inflammatory transcription factor, and augmented wound expression of the pro-angiogenic and pro-repair cytokine TGF-β. These findings show that broad-spectrum CC-chemokine inhibition may be beneficial for the promotion of wound healing. PMID:28098795

  19. Broad-Spectrum Inhibition of the CC-Chemokine Class Improves Wound Healing and Wound Angiogenesis.

    PubMed

    Ridiandries, Anisyah; Bursill, Christina; Tan, Joanne

    2017-01-13

    Angiogenesis is involved in the inflammation and proliferation stages of wound healing, to bring inflammatory cells to the wound and provide a microvascular network to maintain new tissue formation. An excess of inflammation, however, leads to prolonged wound healing and scar formation, often resulting in unfavourable outcomes such as amputation. CC-chemokines play key roles in the promotion of inflammation and inflammatory-driven angiogenesis. Therefore, inhibition of the CC-chemokine class may improve wound healing. We aimed to determine if the broad-spectrum CC-chemokine inhibitor "35K" could accelerate wound healing in vivo in mice. In a murine wound healing model, 35K protein or phosphate buffered saline (PBS, control) were added topically daily to wounds. Cohorts of mice were assessed in the early stages (four days post-wounding) and in the later stages of wound repair (10 and 21 days post-wounding). Topical application of the 35K protein inhibited CC-chemokine expression (CCL5, CCL2) in wounds and caused enhanced blood flow recovery and wound closure in early-mid stage wounds. In addition, 35K promoted neovascularisation in the early stages of wound repair. Furthermore, 35K treated wounds had significantly lower expression of the p65 subunit of NF-κB, a key inflammatory transcription factor, and augmented wound expression of the pro-angiogenic and pro-repair cytokine TGF-β. These findings show that broad-spectrum CC-chemokine inhibition may be beneficial for the promotion of wound healing.

  20. A pair natural orbital implementation of the coupled cluster model CC2 for excitation energies

    NASA Astrophysics Data System (ADS)

    Helmich, Benjamin; Hättig, Christof

    2013-08-01

    We demonstrate how to extend the pair natural orbital (PNO) methodology for excited states, presented in a previous work for the perturbative doubles correction to configuration interaction singles (CIS(D)), to iterative coupled cluster methods such as the approximate singles and doubles model CC2. The original O(N^5) scaling of the PNO construction is reduced by using orbital-specific virtuals (OSVs) as an intermediate step without spoiling the initial accuracy of the PNO method. Furthermore, a slower error convergence for charge-transfer states is analyzed and resolved by a numerical Laplace transformation during the PNO construction, so that an equally accurate treatment of local and charge-transfer excitations is achieved. With state-specific truncated PNO expansions, the eigenvalue problem is solved by combining the Davidson algorithm with deflation to project out roots that have already been determined and an automated refresh with a generation of new PNOs to achieve self-consistency of the PNO space. For a large test set, we found that truncation errors for PNO-CC2 excitation energies are only slightly larger than for PNO-CIS(D). The computational efficiency of PNO-CC2 is demonstrated for a large organic dye, where a reduction of the doubles space by a factor of more than 1000 is obtained compared to the canonical calculation. A compression of the doubles space by a factor 30 is achieved by a unified OSV space only. Moreover, calculations with the still preliminary PNO-CC2 implementation on a series of glycine oligomers revealed an early break even point with a canonical RI-CC2 implementation between 100 and 300 basis functions.

  1. Compliant Joints For Robots

    NASA Technical Reports Server (NTRS)

    Kerley, James J., Jr.

    1990-01-01

    Compliant joints devised to accommodate misalignments of tools and/or workpieces with respect to robotic manipulators. Has characteristics and appearance of both universal-joint and cable-spring-type flexible shaft coupling. Compliance derived from elastic properties of short pieces of cable. Compliance of joint determined by lengths, distances between, relative orientations, thickness of strands, number of strands, material, amount of pretwist, and number of short pieces of cable. Worm-drive mechanism used to adjust lengths to vary compliance as needed during operation.

  2. Joint Robotics Program

    DTIC Science & Technology

    2008-04-23

    Åèìáëáíáçå= oÉëÉ~êÅÜ=póãéçëáìã= JOINT ROBOTICS PROGRAM Published: 23 April 2008 by Joel Brown and Paul Varian 5th Annual Acquisition Research...3. DATES COVERED 00-00-2008 to 00-00-2008 4. TITLE AND SUBTITLE Joint Robotics Program 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...ëóåÉêÖó=Ñçê=áåÑçêãÉÇ=ÅÜ~åÖÉ=======- 464 - = = Joint Robotics Program Presenter: Joel Brown, Defense Acquisition University Author: Paul Varian

  3. Total ankle joint replacement.

    PubMed

    2016-02-01

    Ankle arthritis results in a stiff and painful ankle and can be a major cause of disability. For people with end-stage ankle arthritis, arthrodesis (ankle fusion) is effective at reducing pain in the shorter term, but results in a fixed joint, and over time the loss of mobility places stress on other joints in the foot that may lead to arthritis, pain and dysfunction. Another option is to perform a total ankle joint replacement, with the aim of giving the patient a mobile and pain-free ankle. In this article we review the efficacy of this procedure, including how it compares to ankle arthrodesis, and consider the indications and complications.

  4. Joint attention in parent-child dyads involving children with selective mutism: a comparison between anxious and typically developing children.

    PubMed

    Nowakowski, Matilda E; Tasker, Susan L; Cunningham, Charles E; McHolm, Angela E; Edison, Shannon; Pierre, Jeff St; Boyle, Michael H; Schmidt, Louis A

    2011-02-01

    Although joint attention processes are known to play an important role in adaptive social behavior in typical development, we know little about these processes in clinical child populations. We compared early school age children with selective mutism (SM; n = 19) versus mixed anxiety (MA; n = 18) and community controls (CC; n = 26) on joint attention measures coded from direct observations with their parent during an unstructured free play task and two structured tasks. As predicted, the SM dyads established significantly fewer episodes of joint attention through parental initiation acts than the MA and CC dyads during the structured tasks. Findings suggest that children with SM may withdraw from their parents during stressful situations, thus missing out on opportunities for learning other coping skills. We discuss the implications of the present findings for understanding the maintenance and treatment of SM.

  5. High School Teachers Win ACS Prizes

    NASA Astrophysics Data System (ADS)

    Editorial Staff, Jce

    2009-07-01

    William E. Snyder is the 2009 winner of the ACS Division of Chemical Education Central Region Award for Excellence in High School Teaching; Sally Mitchell is the winner of the 2009 James Bryant Conant Award in High School Chemistry Teaching.

  6. The AC-120: The advanced commercial transport

    NASA Technical Reports Server (NTRS)

    Duran, David; Griffin, Ernest; Mendoza, Saul; Nguyen, Son; Pickett, Tim; Noernberg, Clemm

    1993-01-01

    The main objective of this design was to fulfill a need for a new airplane to replace the aging 100 to 150 passenger, 1500 nautical mile range aircraft such as the Douglas DC9 and Boeing 737-100 airplanes. After researching the future aircraft market, conducting extensive trade studies, and analysis on different configurations, the AC-120 Advanced Commercial Transport final design was achieved. The AC-120's main design features include the incorporation of a three lifting surface configuration which is powered by two turboprop engines. The AC-120 is an economically sensitive aircraft which meets the new FM Stage Three noise requirements, and has lower NO(x) emissions than current turbofan powered airplanes. The AC-120 also improves on its contemporaries in passenger comfort, manufacturing, and operating cost.

  7. Emergence of a novel subpopulation of CC398 Staphylococcus aureus infecting animals is a serious hazard for humans

    PubMed Central

    van der Mee-Marquet, Nathalie L.; Corvaglia, Anna; Haenni, Marisa; Bertrand, Xavier; Franck, Jean-Baptiste; Kluytmans, Jan; Girard, Myriam; Quentin, Roland; François, Patrice

    2014-01-01

    Until recently, Staphylococcus aureus from clonal complex (CC)398 were mostly described as colonizing asymptomatic raised pigs and pig-farmers. Currently, the epidemiology of the CC398 lineage is becoming more complex. CC398 human-adapted isolates are increasingly being identified in bloodstream infections in humans living in animal-free environments. In addition, CC398 isolates are increasingly responsible for invasive infections in various animals. CC398 isolates that colonize asymptomatic pigs and the isolates that infect humans living in animal-free environments (human-adapted isolates) both lack several clinically important S. aureus–associated virulence factors but differ on the basis of their prophage content. Recent findings have provided insight into the influence of a φMR11-like helper prophage on the ability of CC398 isolates to infect humans. To assess the recent spread of the CC398 lineage to various animal species and to investigate the links between the φMR11-like prophage and the emergence of CC398 isolates infecting animals, we studied 277 isolates causing infections in unrelated animals. The prevalence of CC398 isolates increased significantly between 2007 and 2013 (p < 0.001); 31.8% of the animal isolates harbored the φMR11-like prophage. High-density DNA microarray experiments with 37 representative infected-animal isolates positive for φMR11-like DNA established that most infected-animal isolates carried many genetic elements related to antimicrobial resistance and virulence genes, and a φ3 prophage encoding immune-modulating proteins and associated with animal-to-human jumps. Our findings suggest recent clonal expansion and dissemination of a new subpopulation of CC398 isolates, responsible for invasive infections in various animals, with a considerable potential to colonize and infect humans, probably greater than that of human-adapted CC398 isolates, justifying active surveillance. PMID:25538688

  8. Three-phase-to-two-phase direct AC-AC converter with three leg structure

    NASA Astrophysics Data System (ADS)

    Kwak, S.-S.

    2014-05-01

    A three-phase-to-two-phase ac-ac converter is, along with a modulation strategy based on the space vector scheme, introduced to directly drive two-phase output ac systems with high input power quality. The converter is capable of synthesising two sinusoidal output voltages with variable output frequency and arbitrary magnitude in quadrature phase-shift as well as sinusoidal input currents.

  9. Phase protection system for ac power lines

    NASA Technical Reports Server (NTRS)

    Wong, W. J. (Inventor)

    1974-01-01

    The system described provides protection for phase sensitive loads from being or remaining connected to ac power lines whenever a phase reversal occurs. It comprises a solid state phase detection circuit, a dc power relay circuit, an ac-to-dc converter for energizing the relay circuit, and a bistable four terminal transducer coupled between the phase detection circuit and the power relay circuit, for controlling both circuits.

  10. Shoulder Joint Replacement

    MedlinePlus

    ... examination. This will assess shoulder motion, stability, and strength. joint. (Right) Osteoarthritis of the shoulder. Note the ... you can start moving sooner and get your strength back more quickly. Talk with your surgeon if ...

  11. Microtubule alignment and manipulation using AC electrokinetics.

    PubMed

    Uppalapati, Maruti; Huang, Ying-Ming; Jackson, Thomas N; Hancock, William O

    2008-09-01

    The kinesin-microtubule system plays an important role in intracellular transport and is a model system for integrating biomotor-driven transport into microengineered devices. AC electrokinetics provides a novel tool for manipulating and organizing microtubules in solution, enabling new experimental geometries for investigating and controlling the interactions of microtubules and microtubule motors in vitro. By fabricating microelectrodes on glass substrates and generating AC electric fields across solutions of microtubules in low-ionic-strength buffers, bundles of microtubules are collected and aligned and the electrical properties of microtubules in solution are measured. The AC electric fields result in electro-osmotic flow, electrothermal flow, and dielectrophoresis of microtubules, which can be controlled by varying the solution conductivity, AC frequency, and electrode geometry. By mapping the solution conductivity and AC frequency over which positive dielectrophoresis occurs, the apparent conductivity of taxol-stabilized bovine-brain microtubules in PIPES buffer is measured to be 250 mS m(-1). By maximizing dielectrophoretic forces and minimizing electro-osmotic and electrothermal flow, microtubules are assembled into opposed asters. These experiments demonstrate that AC electrokinetics provides a powerful new tool for kinesin-driven transport applications and for investigating the role of microtubule motors in development and maintenance of the mitotic spindle.

  12. Panel Post & Diagonal Brace Joint Detail; Crossbracing Center Joint ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Panel Post & Diagonal Brace Joint Detail; Crossbracing Center Joint Detail; Chord, Panel Post, Tie Bar, & Diagonal Brace Joint Detail; Chord, Tie Bar, & Crossbracing Joint Detail - Medora Bridge, Spanning East Fork of White River at State Route 235, Medora, Jackson County, IN

  13. Jointness: A Selected Bibliography

    DTIC Science & Technology

    2010-12-01

    JOINTNESS A Selected Bibliography U.S. ARMY WAR COLLEGE LIBRARY December 2010 Report Documentation Page Form...Lenore Garder 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) U.S. Army War College...of the U.S. Army War College. A revised and updated version of our earlier bibliographies on jointness, it focuses on aspects of United States

  14. Successfully Developing Joint Leaders

    DTIC Science & Technology

    2010-07-26

    least for the ROTC aspect of the Navy commissioning source, this is about to change at the University of South Florida (USF). In fact the “Joint...get their training over a six- month period at Fort Sill, Oklahoma. A Marine aviator will go through Pensacola Naval Air Station, Florida alongside...MCAS Beaufort, he served in Afghanistan as “Commanding Officer of Taskforce Panther , a joint coalition taskforce in support of OEF” (http

  15. High pressure ceramic joint

    DOEpatents

    Ward, Michael E.; Harkins, Bruce D.

    1993-01-01

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

  16. High pressure ceramic joint

    DOEpatents

    Ward, M.E.; Harkins, B.D.

    1993-11-30

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures. 4 figures.

  17. Hospital Dissemination of tst-1-Positive Clonal Complex 5 (CC5) Methicillin-Resistant Staphylococcus aureus

    PubMed Central

    Wang, Min; Zheng, Yi; Mediavilla, Jose. R.; Chen, Liang; Kreiswirth, Barry. N.; Song, Yajun; Yang, Ruifu; Du, Hong

    2017-01-01

    Methicillin-resistant Staphylococcus aureus (MRSA), is one of the most prevalent clinical pathogens isolated from hospital settings, and has increasingly identified in community settings. In China, the SCCmecIII-ST239 strains are disseminated in different geographic regions, accounting for >75% of all MRSA isolates in some national studies. Here we characterized 150 non-duplicate MRSA isolates collected from February 2012 to May 2013 in a tertiary hospital in Suzhou, Eastern China, to explore the molecular epidemiology. All isolates were characterized by spa typing, SCCmec typing, and detection of genes encoding Panton-Valentine leukocidin (PVL) and toxic shock syndrome toxin (TSST-1). Representative genotypes were also subjected to multilocus sequence typing (MLST). Antibiotic susceptibility testing was performed using BD Phoenix™ Automated Microbiology System. Molecular typing identified 11 clonal complex (CC) and 28 spa types, with the CC5-spa t002 (29.3%) and CC239-spa t037 (14.7%) being the most prevalent. SCCmec types II, III, IV, and V were identified in 33.3, 21.3, 23.3, and 21.3% of all isolates, respectively. PVL genes (lukF/S-PV) were detected in 11.3% of all isolates and from 6 CCs (5, 8, 59, 88, 239, and 398). The TSST-1 gene (tst) was detected in 18.0% of the all isolates, predominantly in CC5 (96.3%). All the tst-1-positve CC5 isolates were spa t002. Eighteen patients died within 30 days of hospitalization, and the in-hospital 30-day mortality was 12.0%. Multivariable analysis showed that 60 years old (odds ratio [OR] = 7.2, P = 0.026), cancer diagnosis (OR = 9.6, P = 0.022), and MRSA isolate carriage of tst-1 (OR = 62.5, P < 0.001) were independent factors associated with 30-day mortality. Our study revealed unique MRSA dissemination patterns in our hospital in comparison to those of other regions in China. The finding that tst-1-positive CC5 strains were associated with higher mortality highlights the need for strict infection control measures in

  18. 17 CFR 240.15Cc1-1 - Withdrawal from registration of government securities brokers or government securities dealers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Withdrawal from registration of government securities brokers or government securities dealers. 240.15Cc1-1 Section 240.15Cc1-1 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) GENERAL RULES...

  19. Pseudopotential-Based Correlation Consistent Composite Approach (rp-ccCA) for First- and Second-Row Transition Metal Thermochemistry.

    PubMed

    Manivasagam, Sivabalan; Laury, Marie L; Wilson, Angela K

    2015-07-02

    The relativistic-pseudopotential correlation consistent composite approach (rp-ccCA) was used to determine the enthalpy of formation (ΔHf) of 24 first row (3d) transition metal compounds. The rp-ccCA-derived ΔHf's were compared to ΔHf's previously obtained with an all-electron composite method for transition metals (ccCA-TM). For the 3d metal systems, rp-ccCA achieves transition metal accuracy, within 3 kcal/mol of reliable experimental data, overall. By utilizing pseudopotentials within the rp-ccCA methodology, we observed a significant computational time savings (53%) in comparison to the all-electron basis sets employed within ccCA-TM. With the proven reliability and accuracy of rp-ccCA, the methodology was employed to construct a calibration set of 210 second-row (4d) transition metal compounds and their ΔHf's. The 4d calibration set is referred to as 4dHf-210. Within the 4dHf-210 set, there were 61 molecules with available experimental data. The average experimental uncertainty was 4.05 kcal/mol and the mean absolute deviation of rp-ccCA was 3.64 kcal/mol, excluding outliers (10 total). This study provides a large set of energetics that can be used to gauge existing and future computational methodologies and to aid experimentalists in reaction design.

  20. 78 FR 6811 - Country Code Top-Level Domain (ccTLD) for the United States; Policies and Requirements; Comments...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-31

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF COMMERCE National Telecommunications and Information Administration RIN 0660-XC005 Country Code Top-Level Domain (cc... Administration (NTIA) administers the contract for the country code top-level domain (ccTLD) for the...

  1. 32 CFR Appendix E to Part 57 - DoD-CC on Early Intervention, Special Education, and Related Services

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 1 2013-07-01 2013-07-01 false DoD-CC on Early Intervention, Special Education... SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN PROVISION OF EARLY INTERVENTION AND SPECIAL EDUCATION..., Special Education, and Related Services A. Committee Membership The DoD-CC shall meet at least yearly...

  2. 32 CFR Appendix E to Part 57 - DoD-CC on Early Intervention, Special Education, and Related Services

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 1 2014-07-01 2014-07-01 false DoD-CC on Early Intervention, Special Education... SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN PROVISION OF EARLY INTERVENTION AND SPECIAL EDUCATION..., Special Education, and Related Services A. Committee Membership The DoD-CC shall meet at least yearly...

  3. 32 CFR Appendix E to Part 57 - DoD-CC on Early Intervention, Special Education, and Related Services

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 1 2011-07-01 2011-07-01 false DoD-CC on Early Intervention, Special Education... SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN PROVISION OF EARLY INTERVENTION AND SPECIAL EDUCATION..., Special Education, and Related Services A. Committee Membership The DoD-CC shall meet at least yearly...

  4. 32 CFR Appendix E to Part 57 - DoD-CC on Early Intervention, Special Education, and Related Services

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 1 2012-07-01 2012-07-01 false DoD-CC on Early Intervention, Special Education... SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN PROVISION OF EARLY INTERVENTION AND SPECIAL EDUCATION..., Special Education, and Related Services A. Committee Membership The DoD-CC shall meet at least yearly...

  5. The chemokinome superfamily: II. The 64 CC chemokines in channel catfish and their involvement in disease and hypoxia responses.

    PubMed

    Fu, Qiang; Yang, Yujia; Li, Chao; Zeng, Qifan; Zhou, Tao; Li, Ning; Liu, Yang; Li, Yun; Wang, Xiaozhu; Liu, Shikai; Li, Daoji; Liu, Zhanjiang

    2017-03-18

    Chemokines are a superfamily of structurally related chemotactic cytokines exerting significant roles in regulating cell migration and activation. Based on the arrangement of the first four cysteine residues, they are classified into CC, CXC, C and CX3C subfamilies. In this study, a complete set of 64 CC chemokine ligand (CCL) genes was systematically identified, annotated, and characterized from the channel catfish genome. Extensive phylogenetic and comparative genomic analyses supported their annotations, allowing establishment of their orthologies, revealing fish-specific CC chemokines and the expansion of CC chemokines in the teleost genomes through lineage-specific tandem duplications. With 64 genes, the channel catfish genome harbors the largest numbers of CC chemokines among all the genomes characterized to date, however, they fall into 11 distinct CC chemokine groups. Analysis of gene expression after bacterial infections indicated that the CC chemokines were regulated in a gene-specific and time-dependent manner. While only one member of CCL19 (CCL19a.1) was significantly up-regulated after Edwardsiella ictaluri infection, all CCL19 members (CCL19a.1, CCL19a.2 and CCL19b) were significantly induced after Flavobacterium columnare infection. In addition, CCL19a.1, CCL19a.2 and CCL19b were also drastically up-regulated in ESC-susceptible fish, but not in resistant fish, suggesting potential significant roles of CCL19 in catfish immune responses. High expression levels of certain CC appeared to be correlated with susceptibility to diseases and intolerance to hypoxia.

  6. Narrowing the Broader Autism Phenotype: A Study Using the Communication Checklist-Adult Version (CC-A)

    ERIC Educational Resources Information Center

    Whitehouse, Andrew J. O.; Coon, Hilary; Miller, Judith; Salisbury, Bryanna; Bishop, Dorothy V. M.

    2010-01-01

    This study investigated whether the Communication Checklist-Adult (CC-A) could identify subtypes of social and communication dysfunction in autism probands and their parents. The CC-A is divided into subscales measuring linguistic ability as well as two aspects of social communication: the Pragmatic Skills subscale assesses the level of pragmatic…

  7. 32 CFR Appendix E to Part 57 - DoD-CC on Early Intervention, Special Education, and Related Services

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false DoD-CC on Early Intervention, Special Education, and Related Services E Appendix E to Part 57 National Defense Department of Defense OFFICE OF THE... SERVICES TO ELIGIBLE DOD DEPENDENTS Pt. 57, App. E Appendix E to Part 57—DoD-CC on Early...

  8. 21 CFR 886.1630 - AC-powered photostimulator.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered photostimulator. 886.1630 Section 886...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1630 AC-powered photostimulator. (a) Identification. An AC-powered photostimulator is an AC-powered device intended to provide light stimulus...

  9. 21 CFR 886.1630 - AC-powered photostimulator.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false AC-powered photostimulator. 886.1630 Section 886...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1630 AC-powered photostimulator. (a) Identification. An AC-powered photostimulator is an AC-powered device intended to provide light stimulus...

  10. 21 CFR 886.1850 - AC-powered slitlamp biomicroscope.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered slitlamp biomicroscope. 886.1850... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1850 AC-powered slitlamp biomicroscope. (a) Identification. An AC-powered slitlamp biomicroscope is an AC-powered device that is...

  11. 21 CFR 886.1850 - AC-powered slitlamp biomicroscope.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false AC-powered slitlamp biomicroscope. 886.1850... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1850 AC-powered slitlamp biomicroscope. (a) Identification. An AC-powered slitlamp biomicroscope is an AC-powered device that is...

  12. 21 CFR 888.1240 - AC-powered dynamometer.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false AC-powered dynamometer. 888.1240 Section 888.1240...) MEDICAL DEVICES ORTHOPEDIC DEVICES Diagnostic Devices § 888.1240 AC-powered dynamometer. (a) Identification. An AC-powered dynamometer is an AC-powered device intended for medical purposes to...

  13. 21 CFR 886.4440 - AC-powered magnet.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered magnet. 886.4440 Section 886.4440 Food... DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4440 AC-powered magnet. (a) Identification. An AC-powered magnet is an AC-powered device that generates a magnetic field intended to find and...

  14. 21 CFR 886.4440 - AC-powered magnet.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false AC-powered magnet. 886.4440 Section 886.4440 Food... DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4440 AC-powered magnet. (a) Identification. An AC-powered magnet is an AC-powered device that generates a magnetic field intended to find and...

  15. 21 CFR 886.4440 - AC-powered magnet.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false AC-powered magnet. 886.4440 Section 886.4440 Food... DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4440 AC-powered magnet. (a) Identification. An AC-powered magnet is an AC-powered device that generates a magnetic field intended to find and...

  16. 21 CFR 886.4440 - AC-powered magnet.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false AC-powered magnet. 886.4440 Section 886.4440 Food... DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4440 AC-powered magnet. (a) Identification. An AC-powered magnet is an AC-powered device that generates a magnetic field intended to find and...

  17. 21 CFR 886.4440 - AC-powered magnet.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false AC-powered magnet. 886.4440 Section 886.4440 Food... DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4440 AC-powered magnet. (a) Identification. An AC-powered magnet is an AC-powered device that generates a magnetic field intended to find and...

  18. 21 CFR 888.1240 - AC-powered dynamometer.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered dynamometer. 888.1240 Section 888.1240...) MEDICAL DEVICES ORTHOPEDIC DEVICES Diagnostic Devices § 888.1240 AC-powered dynamometer. (a) Identification. An AC-powered dynamometer is an AC-powered device intended for medical purposes to...

  19. Joint Doctrine for Civil Affairs

    DTIC Science & Technology

    2007-11-02

    Authorities ( MACA ), DODD 5525.5, DOD Cooperation with Civilian Law Enforcement Officials, and JP 3-07.7, Joint Doctrine for Civil Support. II-15 Civil Affairs...Joint Operation Planning and Execution System JP joint publication JTF joint task force LOAC law of armed conflict MACA military assistance to civil

  20. Joint Electromagnetic Spectrum Management Operations

    DTIC Science & Technology

    2012-03-20

    synchronizing, and deconflicting JEMSMO actions (p. IV-7) Doctrine Update for JP 6-01, Joint Electromagnetic Spectrum Management Operations...communications system directorate of a joint staff (J-6), to support joint planning, coordination, and control of the spectrum for assigned forces. Executive...in the respective Service or joint publications. Interference Resolution To ensure critical frequencies and spectrum-dependent systems are

  1. AC Electrokinetics of Physiological Fluids for Biomedical Applications.

    PubMed

    Lu, Yi; Liu, Tingting; Lamanda, Ariana C; Sin, Mandy L Y; Gau, Vincent; Liao, Joseph C; Wong, Pak Kin

    2015-12-01

    Alternating current (AC) electrokinetics is a collection of processes for manipulating bulk fluid mass and embedded objects with AC electric fields. The ability of AC electrokinetics to implement the major microfluidic operations, such as pumping, mixing, concentration, and separation, makes it possible to develop integrated systems for clinical diagnostics in nontraditional health care settings. The high conductivity of physiological fluids presents new challenges and opportunities for AC electrokinetics-based diagnostic systems. In this review, AC electrokinetic phenomena in conductive physiological fluids are described followed by a review of the basic microfluidic operations and the recent biomedical applications of AC electrokinetics. The future prospects of AC electrokinetics for clinical diagnostics are presented.

  2. AC Electrokinetics of Physiological Fluids for Biomedical Applications

    PubMed Central

    Lu, Yi; Liu, Tingting; Lamanda, Ariana C.; Sin, Mandy L Y; Gau, Vincent; Liao, Joseph C.; Wong, Pak Kin

    2016-01-01

    AC electrokinetics is a collection of processes for manipulating bulk fluid mass and embedded objects with AC electric fields. The ability of AC electrokinetics to implement the major microfluidic operations, such as pumping, mixing, concentration and separation, makes it possible to develop integrated systems for clinical diagnostics in non-traditional healthcare settings. The high conductivity of physiological fluids presents new challenges and opportunities for AC electrokinetics based diagnostic systems. In this review, AC electrokinetic phenomena in conductive physiological fluids are described followed by a review of the basic microfluidic operations and the recent biomedical applications of AC electrokinetics. The future prospects of AC electrokinetics for clinical diagnostics are presented. PMID:25487557

  3. PDGF-CC underlies resistance to VEGF-A inhibition and combinatorial targeting of both suppresses pathological angiogenesis more efficiently

    PubMed Central

    Du, Yuxiang; Lin, Xianchai; Jiang, Yida; Lee, Chunsik; Tian, Geng; Mi, Jia; Li, Xianglin; Chen, Qishan; Ye, Zhimin; Huang, Lijuan; Wang, Shasha; Ren, Xiangrong; Xing, Liying; Chen, Wei; Huang, Delong; Gao, Zhiqin; Zhang, Shuping; Lu, Weisi; Tang, Zhongshu; Wang, Bin; Ju, Rong; Li, Xuri

    2016-01-01

    Anti-VEGF-A therapy has proven to be effective for many neovascular diseases. However, drug resistance to anti-VEGF-A treatment can develop. Also, not all patients with neovascular diseases are responsive to anti-VEGF-A treatment. The mechanisms underlying these important issues remain unclear. In this study, using different model systems, we found that inhibition of VEGF-A directly upregulated PDGF-CC and its receptors in multiple cell types in pathological angiogenesis in vitro and in vivo. Importantly, we further revealed that combinatorial targeting of VEGF-A and PDGF-CC suppressed pathological angiogenesis more efficiently than monotherapy. Given the potent angiogenic activity of PDGF-CC, our findings suggest that the development of resistance to anti-VEGF-A treatment may be caused by the compensatory upregulation of PDGF-CC, and combined inhibition of VEGF-A and PDGF-CC may have therapeutic advantages in treating neovascular diseases. PMID:27788490

  4. PDGF-CC underlies resistance to VEGF-A inhibition and combinatorial targeting of both suppresses pathological angiogenesis more efficiently.

    PubMed

    Zheng, Lei; Zhao, Chen; Du, Yuxiang; Lin, Xianchai; Jiang, Yida; Lee, Chunsik; Tian, Geng; Mi, Jia; Li, Xianglin; Chen, Qishan; Ye, Zhimin; Huang, Lijuan; Wang, Shasha; Ren, Xiangrong; Xing, Liying; Chen, Wei; Huang, Delong; Gao, Zhiqin; Zhang, Shuping; Lu, Weisi; Tang, Zhongshu; Wang, Bin; Ju, Rong; Li, Xuri

    2016-11-22

    Anti-VEGF-A therapy has proven to be effective for many neovascular diseases. However, drug resistance to anti-VEGF-A treatment can develop. Also, not all patients with neovascular diseases are responsive to anti-VEGF-A treatment. The mechanisms underlying these important issues remain unclear. In this study, using different model systems, we found that inhibition of VEGF-A directly upregulated PDGF-CC and its receptors in multiple cell types in pathological angiogenesis in vitro and in vivo. Importantly, we further revealed that combinatorial targeting of VEGF-A and PDGF-CC suppressed pathological angiogenesis more efficiently than monotherapy. Given the potent angiogenic activity of PDGF-CC, our findings suggest that the development of resistance to anti-VEGF-A treatment may be caused by the compensatory upregulation of PDGF-CC, and combined inhibition of VEGF-A and PDGF-CC may have therapeutic advantages in treating neovascular diseases.

  5. Non-Federal Participation in AC Intertie : Final Environmental Impact Statement. Volume 1: Environmental Analysis.

    SciTech Connect

    United States. Bonneville Power Administration.

    1994-01-01

    Bonneville Power Administration (BPA) is considering action in two areas: (1) non-Federal access to the AC Intertie, and, (2) BPA Intertie marketing. BPA`s preferred alternative for non-Federal access is the Capacity Ownership alternative combined with the Increased Assured Delivery -- Access for Non-Scheduling Utilities alternative; the preferred alternative for BPA Intertie marketing is the Federal Marketing and Joint Ventures alternative. BPA considered these two areas previously in its Intertie Development and Use EIS of April 1988. The EIS resulted in BPA decisions to participate in the construction of the Third AC Intertie, to allow non-Federal access to BPA`s share of the Pacific Northwest-Pacific Southwest (PNW-PSW) Intertie (AC and DC lines) pursuant to a Long-Term Intertie Access Policy (LTIAP), and to pursue BPA`s export marketing alternative. The decision on allowing direct financial non-Federal participation in the Third AC line was deferred to a later, separate process, examined here. Also, BPA`s export marketing objectives must now be examined in view of changed operations of Columbia River hydro facilities for improved fish survival.

  6. Structural Transformation and Aggregation of cc-beta Peptides Into Amyloid Proto-fibrils

    NASA Astrophysics Data System (ADS)

    Bhandari, Yuba; Steckmann, Timothy; Chapagain, Prem; Gerstman, Bernard

    2013-03-01

    The study of amyloid fibrils has important implications in understanding and treatment of various neurodegenerative diseases such as Alzheimer's and Parkinson's. During the formation of amyloid fibrils, peptide polymers manifest fascinating physical behavior by undergoing complicated structural transformations. We examine the behavior of a small engineered peptide called cc-beta, that was designed to mimic the structural changes of the much larger, naturally occurring amyloid beta proteins. Molecular dynamics (MD) simulations are performed to uncover the underlying physics that is responsible for the large scale structural transformations. By using implicit solvent replica exchange MD simulations, we examined the behavior of 12 peptides, initially arranged in four different cc-beta alpha helix trimers. We observed various intermediate stages of aggregation, as well as an organized proto-fibril beta aggregate. We discuss the time evolution and the various interactions involved in the structural transformation.

  7. Tunable hybrid plasma decomposition of dilute concentrations of CC14 in air

    SciTech Connect

    Truex, M.J. ); Bromberg, L.; Cohn, D.R.; Koch, M.; Patrick, R.M.; Thomas, P. . Plasma Fusion Center)

    1993-01-01

    At the Department of Energy Hanford site, a large quantity of the industrial solvent carbon tetrachloride (CC14) was used and subsequently disposed of in leaching fields. Efforts under the Volatile Organic Compound - Arid Integrated Demonstration Program (VOC-Arid ID) are directed at vapor extraction of carbon tetrachloride from the ground and its subsequent decomposition in the contaminated humid air stream. We are developing a mobile electron-beam driven plasma reactor for versatile efficient on-site decomposition of CC14 and other VOCs in carrier gases at atmospheric pressure. The decomposition of the VOCs could result in the generation of CO[sub 2], light hydrocarbons, and reactive chlorine compounds. The latter dissolve and/or dissociate in aqueous solutions.

  8. Tunable hybrid plasma decomposition of dilute concentrations of CC14 in air

    SciTech Connect

    Truex, M.J.; Bromberg, L.; Cohn, D.R.; Koch, M.; Patrick, R.M.; Thomas, P.

    1993-01-01

    At the Department of Energy Hanford site, a large quantity of the industrial solvent carbon tetrachloride (CC14) was used and subsequently disposed of in leaching fields. Efforts under the Volatile Organic Compound - Arid Integrated Demonstration Program (VOC-Arid ID) are directed at vapor extraction of carbon tetrachloride from the ground and its subsequent decomposition in the contaminated humid air stream. We are developing a mobile electron-beam driven plasma reactor for versatile efficient on-site decomposition of CC14 and other VOCs in carrier gases at atmospheric pressure. The decomposition of the VOCs could result in the generation of CO{sub 2}, light hydrocarbons, and reactive chlorine compounds. The latter dissolve and/or dissociate in aqueous solutions.

  9. Scaling animal to human biodistribution of the radiopharmaceutical [68Ga]Ga-PSMA-HBED-CC

    NASA Astrophysics Data System (ADS)

    Parra, Pamela Ochoa; Veloza, Stella

    2016-07-01

    The radiotracer called 68Ga-labelled Glu-urea-Lys(Ahx)-HBED-CC ([68Ga]Ga-PSMA-HBED-CC) is a novel radiophar-maceutical for the detection of prostate cancer lesions by positron emission tomography (PET) imaging. Setting up a cost-effective manual synthesis of this radiotracer and making its clinical translation in Colombia will require two important elements: the evaluation of the procedure to yield a consistent product, meeting standards of radio-chemical purity and low toxicity and then, the evaluation of the radiation dosimetry. In this paper a protocol to extrapolate the biokinetic model made in normal mice to humans by using the computer software for internal dose assessment OLINDA/EXM® is presented as an accurate and standardized method for the calculation of radiation dosimetry estimates.

  10. Endothelial PDGF-CC regulates angiogenesis-dependent thermogenesis in beige fat

    PubMed Central

    Seki, Takahiro; Hosaka, Kayoko; Lim, Sharon; Fischer, Carina; Honek, Jennifer; Yang, Yunlong; Andersson, Patrik; Nakamura, Masaki; Näslund, Erik; Ylä-Herttuala, Seppo; Sun, Meili; Iwamoto, Hideki; Li, Xuri; Liu, Yizhi; Samani, Nilesh J.; Cao, Yihai

    2016-01-01

    Cold- and β3-adrenoceptor agonist-induced sympathetic activation leads to angiogenesis and UCP1-dependent thermogenesis in mouse brown and white adipose tissues. Here we show that endothelial production of PDGF-CC during white adipose tissue (WAT) angiogenesis regulates WAT browning. We find that genetic deletion of endothelial VEGFR2, knockout of the Pdgf-c gene or pharmacological blockade of PDGFR-α impair the WAT-beige transition. We further show that PDGF-CC stimulation upregulates UCP1 expression and acquisition of a beige phenotype in differentiated mouse WAT-PDGFR-α+ progenitor cells, as well as in human WAT-PDGFR-α+ adipocytes, supporting the physiological relevance of our findings. Our data reveal a paracrine mechanism by which angiogenic endothelial cells modulate adipocyte metabolism, which may provide new targets for the treatment of obesity and related metabolic diseases. PMID:27492130

  11. Potential of Metal-Catalyzed C-C Single Bond Cleavage for Organic Synthesis.

    PubMed

    Murakami, Masahiro; Ishida, Naoki

    2016-10-11

    Conventional organic synthesis has been mainly based upon the reactivities of π-bonds and polar σ-bonds. Carbon-carbon single bonds are nonpolar and generally far less reactive. Although they remain intact under most reaction conditions, it is possible to activate and cleave them if suitable organometallic compounds or metal catalysts are applied. Such C-C single bond cleavage reactions are attracting increasing attention in the context of synthetic chemistry because they provide a unique and more straightforward route from readily available substances to targets, while requiring significantly fewer steps. The present Perspective aims to exemplify the potential of metal-catalyzed C-C single bond cleavage for organic synthesis.

  12. Hubble Space Telescope Ultraviolet Light Curves Reveal Interesting Properties of CC Sculptoris and RZ Leonis

    NASA Astrophysics Data System (ADS)

    Szkody, Paula; Mukadam, Anjum S.; Toloza, Odette; Gänsicke, Boris T.; Dai, Zhibin; Pala, Anna F.; Waagen, Elizabeth O.; Godon, Patrick; Sion, Edward M.

    2017-03-01

    Time-tag ultraviolet data obtained on the Hubble Space Telescope in 2013 reveal interesting variability related to the white dwarf spin in the two cataclysmic variables RZ Leo and CC Scl. RZ Leo shows a period at 220 s and its harmonic at 110 s, thus identifying it as a likely Intermediate Polar (IP). The spin signal is not visible in a short single night of ground-based data in 2016, but the shorter exposures in that data set indicate a possible partial eclipse. The much larger UV amplitude of the spin signal in the known IP CC Scl allows the spin of 389 s, previously only seen at outburst, to be visible at quiescence. Spectra created from the peaks and troughs of the spin times indicate a hotter temperature of several thousand degrees during the peak phases, with multiple components contributing to the UV light.

  13. Phyto-relief CC: prevention of cold episodes. Control of signs/symptoms and complications.

    PubMed

    Luzzi, R; Belcaro, G; Pellegrini, L; Cornelli, U; Feragalli, B; Dugall, M

    2015-10-22

    The aim of this supplement, registry study was to evaluate the effects of the use of standardized, oral supplement (Phyto-Relief CC, Alchem). Phyto-Relief CC includes anti-inflammatory, anti-oxidant and anti- edema natural compounds. Increased salivation produced by ginger is useful in the prevention of cold episodes and on signs and symptoms associated to the episodes by increasing saliva and its content (i.e. lysozyme). Main targets of the study were the evaluation of the occurrence of episodes and the reduction of signs/symptoms, the reduction of days of disease, the reduction in the use of other treatments and the control of cold-related complications.

  14. Effect of Cu particles on the ablation properties of C/C composites

    NASA Astrophysics Data System (ADS)

    Liu, Lei; Li, Hejun; Shi, Xiaohong; Feng, Wei; Feng, Bo; Sun, Can

    2013-11-01

    To improve the ablation property, Cu particles were introduced into carbon/carbon (C/C) composites through liquid precursor infiltration combined with in-situ reaction. Compared to pure C/C composites, the modified composites displayed better mechanical property and ablation resistance under oxyacetylene torch when the Cu content was below 8 wt. %. For C/C-Cu composites with 8 wt. % Cu, a 14% decline of linear ablation rate was obtained while defective fibers and laminar matrix survived after ablation. Analyses of ablation behavior depending on ablation time indicated that overflowing of Cu gas weakened the scouring of ablation gas and the Cu gas reduced the partial pressure of oxidizing species, which led to the improved ablation property.

  15. 78 FR 49318 - Availability of Draft Advisory Circular (AC) 90-106A and AC 20-167A

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-13

    ... Federal Aviation Administration Availability of Draft Advisory Circular (AC) 90-106A and AC 20- 167A...: This notice announces the availability of draft Advisory Circular (AC) 90-106A, Enhanced Flight Vision Systems and draft AC 20- 167A, Airworthiness Approval of Enhanced Vision System, Synthetic Vision...

  16. Energy materials coordinating committee (EMaCC). Annual technical report, fiscal year 2004

    SciTech Connect

    none,

    2005-08-31

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. Topical subcommittees of the EMaCC are responsible for conducting seminars and otherwise facilitating information flow between DOE organizational units in materials areas of particular importance to the Department. The EMaCC Terms of Reference were recently modified and developed into a Charter that was approved on June 5, 2003. As a result of this reorganization, the existing subcommittees were disbanded and new subcommittees are being formed. The FY 2004 budget summary for DOE Materials Activities is presented on page 8. The distribution of these funds between DOE laboratories, private industry, academia and other organizations is presented in tabular form on page 10. Following the budget summary is a set of detailed program descriptions for the FY 2004 DOE Materials activities. These descriptions are presented according to the organizational structure of the Department. A mission statement, a budget summary listing the project titles and FY 2004 funding, and detailed project summaries are presented for each Assistant Secretary office, the Office of Science, and the National Nuclear Security Administration. The project summaries also provide DOE, laboratory, academic and industrial contacts for each project, as appropriate.

  17. The Consumer Assessment of Healthcare Providers and Systems (CAHPS®) Cultural Competence (CC) Item Set

    PubMed Central

    Weech-Maldonado, Robert; Carle, Adam; Weidmer, Beverly; Hurtado, Margarita; Ngo-Metzger, Quyen; Hays, Ron D.

    2013-01-01

    Background There is a need for reliable and valid measures of cultural competence from the patient’s perspective. Objective This paper evaluates the reliability and validity of the Consumer Assessments of Healthcare Providers and Systems (CAHPS®) Cultural Competence (CC) item set. Research Design Using 2008 survey data, we assessed the internal consistency of the CAHPS CC scales using Cronbach alphas, and examined the validity of the measures using exploratory and confirmatory factor analysis, multitrait scaling analysis, and regression analysis. Subjects A random stratified sample (based on race/ethnicity and language) of 991 enrollees, less than 65 years old, from two Medicaid managed care plans in California and New York. Measures CAHPS CC item set after excluding screener items and ratings. Results Confirmatory factor analysis (CFI= 0.98; TLI= 0.98; RMSEA= 0.06) provided support for a seven-factor structure: Doctor Communication-Positive Behaviors; Doctor Communication-Negative Behaviors; Doctor Communication-Health Promotion; Doctor Communication-Alternative Medicine; Shared Decision Making; Equitable Treatment; and Trust. Item--total correlations (corrected for item overlap) for the 7 scales exceeded 0.40. Exploratory factor analysis showed support for one additional factor: Access to Interpreter Services. Internal consistency reliability estimates ranged from 0.58 (Alternative Medicine) to 0.92 (Positive Behaviors), and was 0.70 or higher for four of the eight composites. All composites were positively and significantly associated with the overall doctor rating. Conclusions The CAHPS CC 26-item set demonstrates adequate measurement properties, and can be used as a supplemental item set to the CAHPS Clinician and Group Surveys in assessing culturally competent care from the patient’s perspective. PMID:22895226

  18. Staphylococcus aureus CC398: Host Adaptation and Emergence of Methicillin Resistance in Livestock

    PubMed Central

    Price, Lance B.; Stegger, Marc; Hasman, Henrik; Aziz, Maliha; Larsen, Jesper; Andersen, Paal Skytt; Pearson, Talima; Waters, Andrew E.; Foster, Jeffrey T.; Schupp, James; Gillece, John; Driebe, Elizabeth; Liu, Cindy M.; Springer, Burkhard; Zdovc, Irena; Battisti, Antonio; Franco, Alessia; Żmudzki, Jacek; Schwarz, Stefan; Butaye, Patrick; Jouy, Eric; Pomba, Constanca; Porrero, M. Concepción; Ruimy, Raymond; Smith, Tara C.; Robinson, D. Ashley; Weese, J. Scott; Arriola, Carmen Sofia; Yu, Fangyou; Laurent, Frederic; Keim, Paul; Skov, Robert; Aarestrup, Frank M.

    2012-01-01

    ABSTRACT Since its discovery in the early 2000s, methicillin-resistant Staphylococcus aureus (MRSA) clonal complex 398 (CC398) has become a rapidly emerging cause of human infections, most often associated with livestock exposure. We applied whole-genome sequence typing to characterize a diverse collection of CC398 isolates (n = 89), including MRSA and methicillin-susceptible S. aureus (MSSA) from animals and humans spanning 19 countries and four continents. We identified 4,238 single nucleotide polymorphisms (SNPs) among the 89 core genomes. Minimal homoplasy (consistency index = 0.9591) was detected among parsimony-informative SNPs, allowing for the generation of a highly accurate phylogenetic reconstruction of the CC398 clonal lineage. Phylogenetic analyses revealed that MSSA from humans formed the most ancestral clades. The most derived lineages were composed predominantly of livestock-associated MRSA possessing three different staphylococcal cassette chromosome mec element (SCCmec) types (IV, V, and VII-like) including nine subtypes. The human-associated isolates from the basal clades carried phages encoding human innate immune modulators that were largely missing among the livestock-associated isolates. Our results strongly suggest that livestock-associated MRSA CC398 originated in humans as MSSA. The lineage appears to have undergone a rapid radiation in conjunction with the jump from humans to livestock, where it subsequently acquired tetracycline and methicillin resistance. Further analyses are required to estimate the number of independent genetic events leading to the methicillin-resistant sublineages, but the diversity of SCCmec subtypes is suggestive of strong and diverse antimicrobial selection associated with food animal production. PMID:22354957

  19. Energy Materials Coordinating Committee (EMaCC). Annual technical report, fiscal year 1983

    SciTech Connect

    1984-03-01

    The following text briefly describes the materials research programs of the Department of Energy. It is organized by office and organizational charts are provided to allow easy identification of the materials research programs of each office. These program descriptions have been prepared from inputs submitted by many different EMaCC members. This report is not a comprehensive summary of the Department's programs, but rather a compilation of the programs of those offices that submitted inputs.

  20. Deletion of autophagy inducer RB1CC1 results in degeneration of the retinal pigment epithelium.

    PubMed

    Yao, Jingyu; Jia, Lin; Khan, Naheed; Lin, Chengmao; Mitter, Sayak K; Boulton, Michael E; Dunaief, Joshua L; Klionsky, Daniel J; Guan, Jun-Lin; Thompson, Debra A; Zacks, David N

    2015-01-01

    Autophagy regulates cellular homeostasis and response to environmental stress. Within the retinal pigment epithelium (RPE) of the eye, the level of autophagy can change with both age and disease. The purpose of this study is to determine the relationship between reduced autophagy and age-related degeneration of the RPE. The gene encoding RB1CC1/FIP200 (RB1-inducible coiled-coil 1), a protein essential for induction of autophagy, was selectively knocked out in the RPE by crossing Best1-Cre mice with mice in which the Rb1cc1 gene was flanked with Lox-P sites (Rb1cc1(flox/flox)). Ex vivo and in vivo analyses, including western blot, immunohistochemistry, transmission electron microscopy, fundus photography, optical coherence tomography, fluorescein angiography, and electroretinography were performed to assess the structure and function of the retina as a function of age. Deletion of Rb1cc1 resulted in multiple autophagy defects within the RPE including decreased conversion of LC3-I to LC3-II, accumulation of autophagy-targeted precursors, and increased numbers of mitochondria. Age-dependent degeneration of the RPE occurred, with formation of atrophic patches, subretinal migration of activated microglial cells, subRPE deposition of inflammatory and oxidatively damaged proteins, subretinal drusenoid deposits, and occasional foci of choroidal neovascularization. There was secondary loss of photoreceptors overlying the degenerated RPE and reduction in the electroretinogram. These observations are consistent with a critical role of autophagy in the maintenance of normal homeostasis in the aging RPE, and indicate that disruption of autophagy leads to retinal phenotypes associated with age-related degeneration.

  1. Energy Materials Coordinating Committee (EMaCC), Fiscal year 1992. Annual technical report

    SciTech Connect

    Not Available

    1993-05-01

    The DOE EMaCC serves to coordinate the department`s materials programs and to further effective use of materials expertise within the department. This document presents summaries of budgets and of research projects, arranged according to the offices of energy efficiency and renewable energy, energy research, environmental restoration and waste management, nuclear energy, civilian radioactive waste management, defense, and fossil energy. A directory and a keyword index are included.

  2. Energy materials coordinating committee (EMaCC). Annual technical report, fiscal year 2005

    SciTech Connect

    None, None

    2006-09-29

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. Topical subcommittees of the EMaCC are responsible for conducting seminars and otherwise facilitating information flow between DOE organizational units in materials areas of particular importance to the Department. The EMaCC Terms of Reference were recently modified and developed into a Charter that was approved on June 5, 2003. As a result of this reorganization, the existing subcommittees were disbanded and new subcommittees are being formed. The FY 2004 budget summary for DOE Materials Activities is presented on page 8. The distribution of these funds between DOE laboratories, private industry, academia and other organizations is presented in tabular form on page 10. Following the budget summary is a set of detailed program descriptions for the FY 2004 DOE Materials activities. These descriptions are presented according to the organizational structure of the Department. A mission statement, a budget summary listing the project titles and FY 2004 funding, and detailed project summaries are presented for each Assistant Secretary office, the Office of Science, and the National Nuclear Security Administration. The project summaries also provide DOE, laboratory, academic and industrial contacts for each project, as appropriate.

  3. A measurement of the gluon splitting rate into /cc¯ pairs in hadronic Z decays

    NASA Astrophysics Data System (ADS)

    ALEPH Collaboration; Heister, A.; Schael, S.; Barate, R.; Brunelière, R.; de Bonis, I.; Decamp, D.; Goy, C.; Jezequel, S.; Lees, J.-P.; Martin, F.; Merle, E.; Minard, M.-N.; Pietrzyk, B.; Trocmé, B.; Bravo, S.; Casado, M. P.; Chmeissani, M.; Crespo, J. M.; Fernandez, E.; Fernandez-Bosman, M.; Garrido, Ll.; Martinez, M.; Pacheco, A.; Ruiz, H.; Colaleo, A.; Creanza, D.; de Filippis, N.; de Palma, M.; Iaselli, G.; Maggi, G.; Maggi, M.; Nuzzo, S.; Ranieri, A.; Raso, G.; Ruggieri, F.; Selvaggi, G.; Silvestris, L.; Tempesta, P.; Tricomi, A.; Zito, G.; Huang, X.; Lin, J.; Ouyang, Q.; Wang, T.; Xie, Y.; Xu, R.; Xue, S.; Zhang, J.; Zhang, L.; Zhao, W.; Abbaneo, D.; Barklow, T.; Buchmüller, O.; Cattaneo, M.; Cerutti, F.; Clerbaux, B.; Drevermann, H.; Forty, R. W.; Frank, M.; Gianotti, F.; Hansen, J. B.; Harvey, J.; Hutchcroft, D. E.; Janot, P.; Jost, B.; Kado, M.; Mato, P.; Moutoussi, A.; Ranjard, F.; Rolandi, L.; Schlatter, D.; Sguazzoni, G.; Tejessy, W.; Teubert, F.; Valassi, A.; Videau, I.; Badaud, F.; Dessagne, S.; Falvard, A.; Fayolle, D.; Gay, P.; Jousset, J.; Michel, B.; Monteil, S.; Pallin, D.; Pascolo, J. M.; Perret, P.; Hansen, J. D.; Hansen, J. R.; Hansen, P. H.; Kraan, A.; Nilsson, B. S.; Kyriakis, A.; Markou, C.; Simopoulou, E.; Vayaki, A.; Zachariadou, K.; Blondel, A.; Brient, J.-C.; Machefert, F.; Rougé, A.; Swynghedauw, M.; Tanaka, R.; Videau, H.; Ciulli, V.; Focardi, E.; Parrini, G.; Antonelli, A.; Antonelli, M.; Bencivenni, G.; Bossi, F.; Capon, G.; Chiarella, V.; Laurelli, P.; Mannocchi, G.; Murtas, G. P.; Passalacqua, L.; Kennedy, J.; Lynch, J. G.; Negus, P.; O'Shea, V.; Thompson, A. S.; Wasserbaech, S.; Cavanaugh, R.; Dhamotharan, S.; Geweniger, C.; Hanke, P.; Hepp, V.; Kluge, E. E.; Leibenguth, G.; Putzer, A.; Stenzel, H.; Tittel, K.; Wunsch, M.; Beuselinck, R.; Cameron, W.; Davies, G.; Dornan, P. J.; Girone, M.; Hill, R. D.; Marinelli, N.; Nowell, J.; Rutherford, S. A.; Sedgbeer, J. K.; Thompson, J. C.; White, R.; Ghete, V. M.; Girtler, P.; Kneringer, E.; Kuhn, D.; Rudolph, G.; Bouhova-Thacker, E.; Bowdery, C. K.; Clarke, D. P.; Ellis, G.; Finch, A. J.; Foster, F.; Hughes, G.; Jones, R. W. L.; Pearson, M. R.; Robertson, N. A.; Smizanska, M.; van der Aa, O.; Delaere, C.; Lemaitre, V.; Blumenschein, U.; Hölldorfer, F.; Jakobs, K.; Kayser, F.; Kleinknecht, K.; Müller, A.-S.; Renk, B.; Sander, H.-G.; Schmeling, S.; Wachsmuth, H.; Zeitnitz, C.; Ziegler, T.; Bonissent, A.; Coyle, P.; Curtil, C.; Ealet, A.; Fouchez, D.; Payre, P.; Tilquin, A.; Ragusa, F.; David, A.; Dietl, H.; Ganis, G.; Hüttmann, K.; Lütjens, G.; Männer, W.; Moser, H.-G.; Settles, R.; Villegas, M.; Wolf, G.; Boucrot, J.; Callot, O.; Davier, M.; Duflot, L.; Grivaz, J.-F.; Heusse, Ph.; Jacholkowska, A.; Serin, L.; Veillet, J.-J.; Azzurri, P.; Bagliesi, G.; Boccali, T.; Foà, L.; Giammanco, A.; Giassi, A.; Ligabue, F.; Messineo, A.; Palla, F.; Sanguinetti, G.; Sciabà, A.; Spagnolo, P.; Tenchini, R.; Venturi, A.; Verdini, P. G.; Awunor, O.; Blair, G. A.; Cowan, G.; Garcia-Bellido, A.; Green, M. G.; Jones, L. T.; Medcalf, T.; Misiejuk, A.; Strong, J. A.; Teixeira-Dias, P.; Clifft, R. W.; Edgecock, T. R.; Norton, P. R.; Tomalin, I. R.; Ward, J. J.; Bloch-Devaux, B.; Boumediene, D.; Colas, P.; Fabbro, B.; Lançon, E.; Lemaire, M.-C.; Locci, E.; Perez, P.; Rander, J.; Tuchming, B.; Vallage, B.; Konstantinidis, N.; Litke, A. M.; Taylor, G.; Booth, C. N.; Cartwright, S.; Combley, F.; Hodgson, P. N.; Lehto, M.; Thompson, L. F.; Böhrer, A.; Brandt, S.; Grupen, C.; Hess, J.; Ngac, A.; Prange, G.; Borean, C.; Giannini, G.; He, H.; Putz, J.; Rothberg, J.; Armstrong, S. R.; Berkelman, K.; Cranmer, K.; Ferguson, D. P. S.; Gao, Y.; González, S.; Hayes, O. J.; Hu, H.; Jin, S.; Kile, J.; McNamara, P. A.; Nielsen, J.; Pan, Y. B.; von Wimmersperg-Toeller, J. H.; Wiedenmann, W.; Wu, J.; Wu, Sau Lan; Wu, X.; Zobernig, G.; Dissertori, G.

    2003-05-01

    The rate of gluon splitting into /cc¯ pairs in hadronic Z decays is measured using the data sample collected by ALEPH from 1991 to 1995. The selection is based on the identification of leptons (electrons and muons) originating from semileptonic charm decays, and on the topological properties of signal events. The result derived from the selected sample is gcc¯=(3.26+/-0.23(stat)+/-0.42(syst))%.

  4. Minimum Flying Qualities. Volume 3. Program CC’s Implementation of the Human Optimal Control Model

    DTIC Science & Technology

    1990-01-01

    BTIC FILE COPY WRDC-TR-89-3125 Volume III Lfl MINIMUM FLYING QUALITIES _ Volume III: Program CC’s Implementation of the Human Optimal Control Model...technical report has been reviewed and is approved for publica- tion. CAPT MARK J. DETROIT, USAF DAVID K. BOWSER, Chief Control Dynamics Branch... Controls Dynamics Branch Flight Control Division Flight Control Division FOR THE CO.’,ANDER H. MAX DAVIS, Assistant for Research and Technology Flight

  5. Granger Causality and National Procurement Spending: Applications to the CC130 Hercules Fleet Performance

    DTIC Science & Technology

    2011-09-01

    Assistant Deputy Minister (Materiel) DRDC CORA TM 2011-154 September 2011 Granger Causality and National Procurement Spending Applications to the CC130...Hercules Fleet Performance David W. Maybury Materiel Group Operational Research Dr aft Co py Dr aft Co py Granger Causality and National Procurement...Canada), telle que représentée par le ministre de la Défense nationale, 2011 Dr aft Co py Abstract Using Granger causality tests, we look for relationships

  6. Catalogue of maximum crack opening stress for CC(T) specimen assuming large strain condition

    NASA Astrophysics Data System (ADS)

    Graba, Marcin

    2013-06-01

    In this paper, values for the maximum opening crack stress and its distance from crack tip are determined for various elastic-plastic materials for centre cracked plate in tension (CC(T) specimen) are presented. Influences of yield strength, the work-hardening exponent and the crack length on the maximum opening stress were tested. The author has provided some comments and suggestions about modelling FEM assuming large strain formulation.

  7. Quartic scaling analytical gradients of scaled opposite-spin CC2

    NASA Astrophysics Data System (ADS)

    Winter, Nina O. C.; Hättig, Christof

    2012-06-01

    An implementation of analytical gradients, transition moments and excited state properties for scaled opposite-spin (SOS) CC2 and a SOS variant of the algebraic diagrammatic construction through second order ADC(2) is presented. The time-determining fifth order scaling steps in the algorithms are replaced by schemes with only fourth order scaling computational costs using a "resolution of the identity" approximation for the electron repulsion integrals and a numerical Laplace transformation of the orbital energy denominators. This leads to a significant reduction of the computational costs for geometry optimizations of large systems. This work is an extension to the recently presented quartic scaling algorithm for SOS-CC2 energies for ground and excited states. The Laplace error for adiabatic electronic excitation energies and excited state structures is found to be very small. SOS-ADC(2) provides for adiabatic electronic excitation energies, excited state structure parameters, harmonic vibrational frequencies as well as dipole moments and transition strengths an accuracy similar to SOS-CC2. Timings for ground and excited state calculations are reported and applications to a chlorophyll molecule and a ditopic 2,2':6',2″-bis(terpyridine) with 160 atoms demonstrate how the new implementation extends the applicability of these methods for large systems.

  8. C-C Bond Activation and Coupling of Propene Induced by la Atom

    NASA Astrophysics Data System (ADS)

    Hewage, Dilrukshi; Tao, Hong; Silva, Ruchira; Kumari, Sudesh; Yang, Dong-Sheng

    2013-06-01

    A series of La(C_nH_m) complexes with n ≤ 6 and m ≤ 12 were produced by the reactions between propene and La in a supersonic molecular beam source. Their formation and structures were investigated using mass-analyzed threshold ionization (MATI) spectroscopy in combination with theoretical calculations. Previously, we identified the formation of La(C_3H_4) and H-La(C_3H_5) through dehydrogenation and metal insertion mechanisms. In this work, we will discuss the formation of La(CH_2) and La(C_4H_6) by La induced C-C bond activation and coupling. La(CH_2) is formed by the C-C bond breakage and 1,2-hydride shift of propene and is a Schrock-type carbene complex. This complex is then coupled with the C=C bond of a second propene molecule to form La(C_4H_6) by removing two hydrogen atoms. The resultant La(C_4H_6) complex was idetified in two low-energy isomeric forms: one was a metallacycle (isomer A) and the other was lanthanum trimethylenemethane (isomer B). Both La(C_4H_6) isomers are in a doublet ground state, with isomer A in C_s point group and isomer B in C_3_v. Adiabatic ionization energies and several vibrational frequencies of the two complexes were obtained from the sharp MATI spectra.

  9. CC-122, a pleiotropic pathway modifier, mimics an interferon response and has antitumor activity in DLBCL.

    PubMed

    Hagner, Patrick R; Man, Hon-Wah; Fontanillo, Celia; Wang, Maria; Couto, Suzana; Breider, Mike; Bjorklund, Chad; Havens, Courtney G; Lu, Gang; Rychak, Emily; Raymon, Heather; Narla, Rama Krishna; Barnes, Leo; Khambatta, Gody; Chiu, Hsiling; Kosek, Jolanta; Kang, Jian; Amantangelo, Michael D; Waldman, Michelle; Lopez-Girona, Antonia; Cai, Ti; Pourdehnad, Michael; Trotter, Matthew; Daniel, Thomas O; Schafer, Peter H; Klippel, Anke; Thakurta, Anjan; Chopra, Rajesh; Gandhi, Anita K

    2015-08-06

    Cereblon (CRBN), a substrate receptor of the Cullin 4 RING E3 ubiquitin ligase complex, is the target of the immunomodulatory drugs lenalidomide and pomalidomide. Recently, it was demonstrated that binding of these drugs to CRBN promotes the ubiquitination and subsequent degradation of 2 common substrates, transcription factors Aiolos and Ikaros. Here we report that CC-122, a new chemical entity termed pleiotropic pathway modifier, binds CRBN and promotes degradation of Aiolos and Ikaros in diffuse large B-cell lymphoma (DLBCL) and T cells in vitro, in vivo, and in patients, resulting in both cell autonomous as well as immunostimulatory effects. In DLBCL cell lines, CC-122-induced degradation or short hairpin RNA-mediated knockdown of Aiolos and Ikaros correlates with increased transcription of interferon (IFN)-stimulated genes independent of IFN-α, -β, and -γ production and/or secretion and results in apoptosis in both activated B-cell (ABC) and germinal center B-cell DLBCL cell lines. Our results provide mechanistic insight into the cell-of-origin independent antilymphoma activity of CC-122, in contrast to the ABC subtype selective activity of lenalidomide.

  10. Real-time MPEG video over LAN with DSM-CC signaling

    NASA Astrophysics Data System (ADS)

    Kan, Kou-Sou; Chen, Cheng-Tie; Loui, Alexander C. P.

    1997-01-01

    For video applications such as video-on-demand, signaling is an important step for service initialization including service setup, authentication, and resource allocation. This paper describes the design and implementation of an experimental platform for delivery of real-time MPEG encoded video over LAN with DSM-CC signaling. The platform consists of a real-time MPEG encoder system as a server, a network node workstation, and a client with MPEG decoding capability. Specifically, we have implemented a client- initiated subset of the DSM-CC user-to-network (UN) protocol for signaling. Communication between the network node and server/client is achieved by using the TCP/IP protocol. The network node provides the functionality of upstream message exchange, UN and/or UU (user-to-user) resource negotiation, and MPEG bitstream relay. The operation of our current video platform setup is quite robust and can deliver MPEG video up to about 1.5 Mb/s via DSM-CC protocols. It is demonstrated that practical implementation of video applications is feasible over small-scale LANs.

  11. CC-122, a pleiotropic pathway modifier, mimics an interferon response and has antitumor activity in DLBCL

    PubMed Central

    Hagner, Patrick R.; Man, Hon-Wah; Fontanillo, Celia; Wang, Maria; Couto, Suzana; Breider, Mike; Bjorklund, Chad; Havens, Courtney G.; Lu, Gang; Rychak, Emily; Raymon, Heather; Narla, Rama Krishna; Barnes, Leo; Khambatta, Gody; Chiu, Hsiling; Kosek, Jolanta; Kang, Jian; Amantangelo, Michael D.; Waldman, Michelle; Lopez-Girona, Antonia; Cai, Ti; Pourdehnad, Michael; Trotter, Matthew; Daniel, Thomas O.; Schafer, Peter H.; Klippel, Anke; Thakurta, Anjan; Gandhi, Anita K.

    2015-01-01

    Cereblon (CRBN), a substrate receptor of the Cullin 4 RING E3 ubiquitin ligase complex, is the target of the immunomodulatory drugs lenalidomide and pomalidomide. Recently, it was demonstrated that binding of these drugs to CRBN promotes the ubiquitination and subsequent degradation of 2 common substrates, transcription factors Aiolos and Ikaros. Here we report that CC-122, a new chemical entity termed pleiotropic pathway modifier, binds CRBN and promotes degradation of Aiolos and Ikaros in diffuse large B-cell lymphoma (DLBCL) and T cells in vitro, in vivo, and in patients, resulting in both cell autonomous as well as immunostimulatory effects. In DLBCL cell lines, CC-122-induced degradation or short hairpin RNA–mediated knockdown of Aiolos and Ikaros correlates with increased transcription of interferon (IFN)–stimulated genes independent of IFN-α, -β, and -γ production and/or secretion and results in apoptosis in both activated B-cell (ABC) and germinal center B-cell DLBCL cell lines. Our results provide mechanistic insight into the cell-of-origin independent antilymphoma activity of CC-122, in contrast to the ABC subtype selective activity of lenalidomide. PMID:26002965

  12. cc¯ pair production in proton-proton collisions including subdominant terms

    NASA Astrophysics Data System (ADS)

    Łuszczak, M.; Szczurek, A.

    2011-10-01

    For the cc¯ production at high-energies the gluon-gluon fusion is the dominant mechanism. This process was calculated in the NLO collinear as well as in the k-factorisation approaches in the past. We show that the present knowledge of gluon distributions does not allow to make precise predictions for cc¯ production at LHC. Next, we study production of cc¯ pairs including following subprocesses: gg→QQ¯, γg→QQ¯, gγ→QQ¯, γγ→QQ¯. In this context we use MRST-QED (Martin, Roberts, Stirling, Thorne) parton distributions which include photon as a parton in the proton. We include also elastic contributions (single proton in the final state) within the equivalent photon approximation. We present distributions in c ( c¯) rapidity and transverse momenta and compare them with the dominant gluon-gluon fusion contribution. We discuss also single and central diffractive processes using diffractive parton distribution found from the analysis of HERA data. As in the previous case we present distribution in c ( c¯) rapidity and transverse momentum.

  13. Subdominant terms in the production of cc¯ pairs in proton-proton collisions

    NASA Astrophysics Data System (ADS)

    Łuszczak, M.; Maciuła, R.; Szczurek, A.

    2011-12-01

    At high energies the gluon-gluon fusion is the dominant mechanism of cc¯ production. This process was calculated in the next-to-leading-order collinear as well as in the kt-factorization approaches in the past. We show that the present knowledge of gluon distributions does not allow one to make precise predictions for cc¯ production at LHC, in particular at forward rapidities. In this paper we study production of cc¯ pairs including several subleading mechanisms. This includes gg→QQ¯, γg→QQ¯, gγ→QQ¯, and γγ→QQ¯. In this context we use Martin-Roberts-Stirling-Thorne QED parton distributions which include the photon as a parton in the proton as well as elastic photon distributions calculated in the equivalent photon approximation. We present distributions in the c quark (c¯ antiquark) rapidity and transverse momenta and compare them to the dominant gluon-gluon fusion contribution. We discuss also inclusive single and central diffractive processes using diffractive parton distribution found from the analysis of HERA diffractive data. As in the previous case we present the distribution in c (c¯) rapidity and transverse momentum. Finally, we present results for an exclusive central diffractive mechanism discussed recently in the literature. We show corresponding differential distributions and compare them with corresponding distributions for single and central diffractive components.

  14. Characterization of CC-531 as a Rat Model of Colorectal Liver Metastases

    PubMed Central

    White, Sarah Beth; Procissi, Daniele; Chen, Jeane; Gogineni, Venkateswara Rao; Tyler, Patrick; Yang, Yihe; Omary, Reed A.; Larson, Andrew C.

    2016-01-01

    Purpose Surgical resection of colorectal liver metastases is not achievable in more than 70% of the cases. Although the liver directed therapies have become a part of the stand of care, lack of a preclinical model impedes the assessment of toxicity and therapeutic benefits attributed several candidate drugs or treatment regimens that can be designed. In the present study we aim develop and characterize a rat colorectal liver metastasis model. Materials and Methods Growth characteristics of CC-531 cells were determined in vitro followed by subcapsular liver implantation in syngeneic WAG/Rij rats. Tumor growth progression was followed over 3 weeks by ultrasound (US) and magnetic resonance imaging (MRI). Growth characteristics were also assessed by histopathology and immunohistochemistry in harvested tumor tissues. Results The doubling time of CC-531 cells was found be under 24hrs and all the implanted rats grew tumors. US imaging showed hypoechoic masses and MRI showed contrast enhancement representing complex tumor microenvironments. Hematoxylin and Eosin staining confirmed tumor growth and uniform CD31 staining in tumor confirmed even vessel density. Conclusion CC-531 can be used as a metastatic rat tumor colorectal liver metastases model with well-defined characteristics that can be readily followed by imaging whilst having a therapeutic window for interventions. PMID:27171151

  15. Periprosthetic Joint Infections

    PubMed Central

    Lima, Ana Lucia L.; Oliveira, Priscila R.; Carvalho, Vladimir C.; Saconi, Eduardo S.; Cabrita, Henrique B.; Rodrigues, Marcelo B.

    2013-01-01

    Implantation of joint prostheses is becoming increasingly common, especially for the hip and knee. Infection is considered to be the most devastating of prosthesis-related complications, leading to prolonged hospitalization, repeated surgical intervention, and even definitive loss of the implant. The main risk factors to periprosthetic joint infections (PJIs) are advanced age, malnutrition, obesity, diabetes mellitus, HIV infection at an advanced stage, presence of distant infectious foci, and antecedents of arthroscopy or infection in previous arthroplasty. Joint prostheses can become infected through three different routes: direct implantation, hematogenic infection, and reactivation of latent infection. Gram-positive bacteria predominate in cases of PJI, mainly Staphylococcus aureus and Staphylococcus epidermidis. PJIs present characteristic signs that can be divided into acute and chronic manifestations. The main imaging method used in diagnosing joint prosthesis infections is X-ray. Computed tomography (CT) scan may assist in distinguishing between septic and aseptic loosening. Three-phase bone scintigraphy using technetium has high sensitivity, but low specificity. Positron emission tomography using fluorodeoxyglucose (FDG-PET) presents very divergent results in the literature. Definitive diagnosis of infection should be made by isolating the microorganism through cultures on material obtained from joint fluid puncturing, surgical wound secretions, surgical debridement procedures, or sonication fluid. Success in treating PJI depends on extensive surgical debridement and adequate and effective antibiotic therapy. Treatment in two stages using a spacer is recommended for most chronic infections in arthroplasty cases. Treatment in a single procedure is appropriate in carefully selected cases. PMID:24023542

  16. Distal radioulnar joint injuries

    PubMed Central

    Thomas, Binu P; Sreekanth, Raveendran

    2012-01-01

    Distal radioulnar joint is a trochoid joint relatively new in evolution. Along with proximal radioulnar joint, forearm bones and interosseous membrane, it allows pronosupination and load transmission across the wrist. Injuries around distal radioulnar joint are not uncommon, and are usually associated with distal radius fractures,fractures of the ulnar styloid and with the eponymous Galeazzi or Essex_Lopresti fractures. The injury can be purely involving the soft tissue especially the triangular fibrocartilage or the radioulnar ligaments. The patients usually present with ulnar sided wrist pain, features of instability, or restriction of rotation. Difficulty in carrying loads in the hand is a major constraint for these patients. Thorough clinical examination to localize point of tenderness and appropriate provocative tests help in diagnosis. Radiology and MRI are extremely useful, while arthroscopy is the gold standard for evaluation. The treatment protocols are continuously evolving and range from conservative, arthroscopic to open surgical methods. Isolated dislocation are uncommon. Basal fractures of the ulnar styloid tend to make the joint unstable and may require operative intervention. Chronic instability requires reconstruction of the stabilizing ligaments to avoid onset of arthritis. Prosthetic replacement in arthritis is gaining acceptance in the management of arthritis. PMID:23162140

  17. 13. Sacroiliac joint pain.

    PubMed

    Vanelderen, Pascal; Szadek, Karolina; Cohen, Steven P; De Witte, Jan; Lataster, Arno; Patijn, Jacob; Mekhail, Nagy; van Kleef, Maarten; Van Zundert, Jan

    2010-01-01

    The sacroiliac joint accounts for approximately 16% to 30% of cases of chronic mechanical low back pain. Pain originating in the sacroiliac joint is predominantly perceived in the gluteal region, although pain is often referred into the lower and upper lumbar region, groin, abdomen, and/ or lower limb(s). Because sacroiliac joint pain is difficult to distinguish from other forms of low back pain based on history, different provocative maneuvers have been advocated. Individually, they have weak predictive value, but combined batteries of tests can help ascertain a diagnosis. Radiological imaging is important to exclude "red flags" but contributes little in the diagnosis. Diagnostic blocks are the diagnostic gold standard but must be interpreted with caution, because false-positive as well as false-negative results occur frequently. Treatment of sacroiliac joint pain is best performed in the context of a multidisciplinary approach. Conservative treatments address the underlying causes (posture and gait disturbances) and consist of exercise therapy and manipulation. Intra-articular sacroiliac joint infiltrations with local anesthetic and corticosteroids hold the highest evidence rating (1 B+). If the latter fail or produce only short-term effects, cooled radiofrequency treatment of the lateral branches of S1 to S3 (S4) is recommended (2 B+) if available. When this procedure cannot be used, (pulsed) radiofrequency procedures targeted at L5 dorsal ramus and lateral branches of S1 to S3 may be considered (2 C+).

  18. Temporomandibular joint disorders.

    PubMed

    Buescher, Jennifer J

    2007-11-15

    Temporomandibular joint disorders are common in adults; as many as one third of adults report having one or more symptoms, which include jaw or neck pain, headache, and clicking or grating within the joint. Most symptoms improve without treatment, but various noninvasive therapies may reduce pain for patients who have not experienced relief from self-care therapies. Physical therapy modalities (e.g., iontophoresis, phonophoresis), psychological therapies (e.g., cognitive behavior therapy), relaxation techniques, and complementary therapies (e.g., acupuncture, hypnosis) are all used for the treatment of temporomandibular joint disorders; however, no therapies have been shown to be uniformly superior for the treatment of pain or oral dysfunction. Noninvasive therapies should be attempted before pursuing invasive, permanent, or semi-permanent treatments that have the potential to cause irreparable harm. Dental occlusion therapy (e.g., oral splinting) is a common treatment for temporomandibular joint disorders, but a recent systematic review found insufficient evidence for or against its use. Some patients with intractable temporomandibular joint disorders develop chronic pain syndrome and may benefit from treatment, including antidepressants or cognitive behavior therapy.

  19. Dissimilar metals joint evaluation

    NASA Technical Reports Server (NTRS)

    Wakefield, M. E.; Apodaca, L. E.

    1974-01-01

    Dissimilar metals tubular joints between 2219-T851 aluminum alloy and 304L stainless steel were fabricated and tested to evaluate bonding processes. Joints were fabricated by four processes: (1) inertia (friction) weldings, where the metals are spun and forced together to create the weld; (2) explosive welding, where the metals are impacted together at high velocity; (3) co-extrusion, where the metals are extruded in contact at high temperature to promote diffusion; and (4) swaging, where residual stresses in the metals after a stretching operation maintain forced contact in mutual shear areas. Fifteen joints of each type were prepared and evaluated in a 6.35 cm (2.50 in.) O.D. size, with 0.32 cm (0.13 in.) wall thickness, and 7.6 cm (3.0 in) total length. The joints were tested to evaluate their ability to withstand pressure cycle, thermal cycle, galvanic corrosion and burst tests. Leakage tests and other non-destructive test techniques were used to evaluate the behavior of the joints, and the microstructure of the bond areas was analyzed.

  20. Design and synthesis of 225Ac radioimmunopharmaceuticals.

    PubMed

    McDevitt, Michael R; Ma, Dangshe; Simon, Jim; Frank, R Keith; Scheinberg, David A

    2002-12-01

    The alpha-particle-emitting radionuclides 213Bi, 211At, 224Ra are under investigation for the treatment of leukemias, gliomas, and ankylosing spondylitis, respectively. 213Bi and 211At were attached to monoclonal antibodies and used as targeted immunotherapeutic agents while unconjugated 224Ra chloride selectively seeks bone. 225Ac possesses favorable physical properties for radioimmunotherapy (10d half-life and 4 net alpha particles), but has a history of unfavorable radiolabeling chemistry and poor metal-chelate stability. We selected functionalized derivatives of DOTA as the most promising to pursue from out of a group of potential 225Ac chelate compounds. A two-step synthetic process employing either MeO-DOTA-NCS or 2B-DOTA-NCS as the chelating moiety was developed to attach 225Ac to monoclonal antibodies. This method was tested using several different IgG systems. The chelation reaction yield in the first step was 93+/-8% radiochemically pure (n=26). The second step yielded 225Ac-DOTA-IgG constructs that were 95+/-5% radiochemically pure (n=27) and the mean percent immunoreactivity ranged from 25% to 81%, depending on the antibody used. This process has yielded several potential novel targeted 225Ac-labeled immunotherapeutic agents that may now be evaluated in appropriate model systems and ultimately in humans.

  1. From Beamline to Scanner with 225Ac

    NASA Astrophysics Data System (ADS)

    Robertson, Andrew K. H.; Ramogida, Caterina F.; Kunz, Peter; Rodriguez-Rodriguez, Cristina; Schaffer, Paul; Sossi, Vesna

    2016-09-01

    Due to the high linear energy transfer and short range of alpha-radiation, targeted radiation therapy using alpha-emitting pharmaceuticals that successfully target small disease clusters will kill target cells with limited harm to healthy tissue, potentially treating the most aggressive forms of cancer. As the parent of a decay chain with four alpha- and two beta-decays, 225Ac is a promising candidate for such a treatment. However, this requires retention of the entire decay chain at the target site, preventing the creation of freely circulating alpha-emitters that reduce therapeutic effect and increase toxicity to non-target tissues. Two major challenges to 225Ac pharmaceutical development exist: insufficient global supply, and the difficulty of preventing toxicity by retaining the entire decay chain at the target site. While TRIUMF works towards large-scale (C i amounts) production of 225Ac, we already use our Isotope Separation On-Line facility to provide small (< 1 mCi) quantities for in-house chemistry and imaging research that aims to improve and assess 225Ac radiopharmaceutical targeting. This presentation provides an overview of this research program and the journey of 225Ac from the beamline to the scanner. This research is funded by the Natural Sciences and Engineering Research Council of Canada.

  2. Immunomodulatory drug CC-4047 is a cell-type and stimulus-selective transcriptional inhibitor of cyclooxygenase 2.

    PubMed

    Ferguson, Gregory D; Jensen-Pergakes, Kristen; Wilkey, Candice; Jhaveri, Urvi; Richard, Normand; Verhelle, Dominique; De Parseval, Laure Moutouh; Corral, Laura G; Xie, Weilin; Morris, Christopher L; Brady, Helen; Chan, Kyle

    2007-03-01

    COX2 (prostaglandin G/H synthase, PTGS2) is a well-validated target in the fields of both oncology and inflammation. Despite their significant toxicity profile, non-steroidal anti-inflammatory drugs (NSAIDs) have become standard of care in the treatment of many COX2-mediated inflammatory conditions. In this report, we show that one IMiDs((R)) immunomodulatory drug, CC-4047, can reduce the levels of COX2 and the production of prostaglandins (PG) in human LPS-stimulated monocytes. The inhibition of COX2 by CC-4047 occurs at the level of gene transcription, by reducing the LPS-stimulated transcriptional activity at the COX2 gene. Because it is a transcriptional rather than an enzymatic inhibitor of COX2, CC-4047 inhibition of PG production is not susceptible to competition by exogenous arachadonic acid (AA). The distinct mechanisms of action allow CC-4047 and a COX2-selective NSAID to work additively to block PG secretion from monocytes. CC-4047 does not, however, block COX2 induction in or prostacyclin secretion from IL-1beta stimulated human umbilical vein endothelial cells (HUVEC) cells, nor does it inhibit COX1 in either monocytes or HUVEC cells. CC-4047 also inhibits COX2 and PG production in monocytes derived from patients with sickle cell disease (SCD). Taken together, the data in this manuscript suggest CC-4047 will provide important anti-inflammatory benefit to patients and will improve the safety of NSAIDs in the treatment of SCD or other inflammatory conditions.

  3. Efficacy and safety of extended dosing schedules of CC-486 (oral azacitidine) in patients with lower-risk myelodysplastic syndromes

    PubMed Central

    Garcia-Manero, G; Gore, S D; Kambhampati, S; Scott, B; Tefferi, A; Cogle, C R; Edenfield, W J; Hetzer, J; Kumar, K; Laille, E; Shi, T; MacBeth, K J; Skikne, B

    2016-01-01

    CC-486, the oral formulation of azacitidine (AZA), is an epigenetic modifier and DNA methyltransferase inhibitor in clinical development for treatment of hematologic malignancies. CC-486 administered for 7 days per 28-day treatment cycle was evaluated in a phase 1 dose-finding study. AZA has a short plasma half-life and DNA incorporation is S-phase-restricted; extending CC-486 exposure may increase the number of AZA-affected diseased target cells and maximize therapeutic effects. Patients with lower-risk myelodysplastic syndromes (MDS) received 300 mg CC-486 once daily for 14 days (n=28) or 21 days (n=27) of repeated 28-day cycles. Median patient age was 72 years (range 31–87) and 75% of patients had International Prognostic Scoring System Intermediate-1 risk MDS. Median number of CC-486 treatment cycles was 7 (range 2–24) for the 14-day dosing schedule and 6 (1–24) for the 21-day schedule. Overall response (complete or partial remission, red blood cell (RBC) or platelet transfusion independence (TI), or hematologic improvement) (International Working Group 2006) was attained by 36% of patients receiving 14-day dosing and 41% receiving 21-day dosing. RBC TI rates were similar with both dosing schedules (31% and 38%, respectively). CC-486 was generally well-tolerated. Extended dosing schedules of oral CC-486 may provide effective long-term treatment for patients with lower-risk MDS. PMID:26442612

  4. Efficacy and safety of extended dosing schedules of CC-486 (oral azacitidine) in patients with lower-risk myelodysplastic syndromes.

    PubMed

    Garcia-Manero, G; Gore, S D; Kambhampati, S; Scott, B; Tefferi, A; Cogle, C R; Edenfield, W J; Hetzer, J; Kumar, K; Laille, E; Shi, T; MacBeth, K J; Skikne, B

    2016-04-01

    CC-486, the oral formulation of azacitidine (AZA), is an epigenetic modifier and DNA methyltransferase inhibitor in clinical development for treatment of hematologic malignancies. CC-486 administered for 7 days per 28-day treatment cycle was evaluated in a phase 1 dose-finding study. AZA has a short plasma half-life and DNA incorporation is S-phase-restricted; extending CC-486 exposure may increase the number of AZA-affected diseased target cells and maximize therapeutic effects. Patients with lower-risk myelodysplastic syndromes (MDS) received 300 mg CC-486 once daily for 14 days (n=28) or 21 days (n=27) of repeated 28-day cycles. Median patient age was 72 years (range 31-87) and 75% of patients had International Prognostic Scoring System Intermediate-1 risk MDS. Median number of CC-486 treatment cycles was 7 (range 2-24) for the 14-day dosing schedule and 6 (1-24) for the 21-day schedule. Overall response (complete or partial remission, red blood cell (RBC) or platelet transfusion independence (TI), or hematologic improvement) (International Working Group 2006) was attained by 36% of patients receiving 14-day dosing and 41% receiving 21-day dosing. RBC TI rates were similar with both dosing schedules (31% and 38%, respectively). CC-486 was generally well-tolerated. Extended dosing schedules of oral CC-486 may provide effective long-term treatment for patients with lower-risk MDS.

  5. Pigeonpea Hybrid-Proline-Rich Protein (CcHyPRP) Confers Biotic and Abiotic Stress Tolerance in Transgenic Rice

    PubMed Central

    Mellacheruvu, Sunitha; Tamirisa, Srinath; Vudem, Dashavantha Reddy; Khareedu, Venkateswara Rao

    2016-01-01

    In this study, we report the overexpression of Cajanus cajan hybrid-proline-rich protein encoding gene (CcHyPRP) in rice which resulted in increased tolerance to both abiotic and biotic stresses. Compared to the control plants, the transgenic rice lines, expressing CcHyPRP, exhibited high-level tolerance against major abiotic stresses, viz., drought, salinity, and heat, as evidenced by increased biomass, chlorophyll content, survival rate, root, and shoot growth. Further, transgenic rice lines showed increased panicle size and grain number compared to the control plants under different stress conditions. The CcHyPRP transgenics, as compared to the control, revealed enhanced activities of catalase and superoxide dismutase (SOD) enzymes and reduced malondialdehyde (MDA) levels. Expression pattern of CcHyPRP::GFP fusion-protein confirmed its predominant localization in cell walls. Moreover, the CcHyPRP transgenics, as compared to the control, exhibited increased resistance to the fungal pathogen Magnaporthe grisea which causes blast disease in rice. Higher levels of bZIP and endochitinase transcripts as well as endochitinase activity were observed in transgenic rice compared to the control plants. The overall results demonstrate the intrinsic role of CcHyPRP in conferring multiple stress tolerance at the whole-plant level. The multipotent CcHyPRP seems promising as a prime candidate gene to fortify crop plants for enhanced tolerance/resistance to different stress factors. PMID:26834756

  6. Numerical simulation of ac plasma arc thermodynamics

    NASA Astrophysics Data System (ADS)

    Wu, Han-Ming; Carey, G. F.; Oakes, M. E.

    1994-05-01

    A mathematical model and approximate analysis for the energy distribution of an ac plasma arc with a moving boundary is developed. A simplified electrical conductivity function is assumed so that the dynamic behavior of the arc may be determined, independent of the gas type. The model leads to a reduced set of non-linear partial differential equations which governs the quasi-steady ac arc. This system is solved numerically and it is found that convection plays an important role, not only in the temperature distribution, but also in arc disruptions. Moreover, disruptions are found to be influenced by convection only for a limited frequency range. The results of the present studies are applicable to the frequnecy range of 10-10(exp 2) Hz which includes most industry ac arc frequencies.

  7. Numerical Simulation of AC Plasma Arc Thermodynamics

    NASA Astrophysics Data System (ADS)

    Wu, Han-Ming; Carey, G. F.; Oakes, M. E.

    1994-05-01

    A mathematical model and approximate analysis for the energy distribution of an ac plasma arc with a moving boundary is developed. A simplified electrical conductivity function is assumed so that the dynamic behavior of the arc may be determined, independent of the gas type. The model leads to a reduced set of non-linear partial differential equations which governs the quasi-steady ac arc. This system is solved numerically and it is found that convection plays an important role, not only in the temperature distribution, but also in arc disruptions. Moreover, disruptions are found to be influenced by convection only for a limited frequency range. The results of the present studies are applicable to the frequency range of 10-102 Hz which includes most industry ac arc frequencies.

  8. [The temporomandibular joint].

    PubMed

    Louryan, S

    1992-10-01

    With its discordant articular surfaces and complete division in two cavities separated by a disk, the temporomandibular joint appears as a complex anatomical and functional entity. Combined movements involving anteroposterior gliding between the disk and temporal bone in the upper cavity, anteroposterior condyle translation, hinge and rotation movements between the disk and mandibular condyle contribute to the different movements of the jaw. With dental occlusion, the masticatory apparatus therefore includes five functionally coordinated articular compartments. Various impairments of the normal static and dynamic features of the temporomandibular joint may lead to relatively frequent pathological conditions which can be easily diagnosed by modern imaging and arthroscopic methods.

  9. Joint for deployable structures

    NASA Technical Reports Server (NTRS)

    Craighead, N. D., II; Preliasco, R. J.; Hult, T. D. (Inventor)

    1985-01-01

    A joint is described for connecting a pair of beams to pivot them between positions in alignment or beside one another, which is of light weight and which operates in a controlled manner. The joint includes a pair of fittings and at least one center link having opposite ends pivotally connected to opposite fittings and having axes that pass through centerplates of the fittings. A control link having opposite ends pivotally connected to the different fittings controls their relative orientations, and a toggle assemly holds the fittings in the deployed configuration wherein they are aligned. The fittings have stops that lie on one side of the centerplane opposite the toggle assembly.

  10. Prosthetic Joint Infection

    PubMed Central

    Tande, Aaron J.

    2014-01-01

    SUMMARY Prosthetic joint infection (PJI) is a tremendous burden for individual patients as well as the global health care industry. While a small minority of joint arthroplasties will become infected, appropriate recognition and management are critical to preserve or restore adequate function and prevent excess morbidity. In this review, we describe the reported risk factors for and clinical manifestations of PJI. We discuss the pathogenesis of PJI and the numerous microorganisms that can cause this devastating infection. The recently proposed consensus definitions of PJI and approaches to accurate diagnosis are reviewed in detail. An overview of the treatment and prevention of this challenging condition is provided. PMID:24696437

  11. Induction of heat-labile sites in DNA of mammalian cells by the antitumor alkylating drug CC-1065

    SciTech Connect

    Zsido, T.J.; Woynarowski, J.M.; Baker, R.M.; Gawron, L.S.; Beerman, T.A. )

    1991-04-16

    CC-1065 is a very potent antitumor antibiotic capable of covalent and noncovalent binding to the minor groove of naked DNA. Upon thermal treatment, covalent adducts formed between CC-1065 and DNA generate strand break. The authors have shown that this molecular damage can be detected following CC-1065 treatment of mammalian whole cells. Using alkaline sucrose gradient analysis, They observe thermally induced breakage of ({sup 14}C)thymidine-prelabeled DNA from drug-treated African green monkey kidney BSC-1 cells. Very little damage to cellular DNA by CC-1065 can be detected without first heating the drug-treated samples. CC-1065 can also generate heat-labile sites within DNA during cell lysis and heating, subsequent to the exposure of cells to drug, suggesting that a pool of free and noncovalently bound drug is available for posttreatment adduct formation. This effect was controlled for by mixing ({sup 3}H)thymidine-labeled untreated cells with the ({sup 14}C)thymidine-labeled drug-treated samples. The lowest drug dose at which heat-labile sites were detected was 3 nM CC-1065 (3 single-stranded breaks/10{sup 6} base pairs). This concentration reduced survival of BSC-1 cells to 0.1% in cytotoxicity assays. The generation of CC-1065-induced lesions in cellular DNA is time dependent (the frequency of lesions caused by a 60 nM treatment reaching a plateau at 2 h) and is not readily reversible. The results of this study demonstrate that CC-1065 does generate heat-labile sites with the cellular DNA of intact cells and suggest that a mechanism of cytotoxic action of CC-1065 involves formation of covalent adducts to DNA.

  12. Merging Active-Space and Renormalized Coupled-Cluster Methods via the CC(P;Q) Formalism, with Benchmark Calculations for Singlet-Triplet Gaps in Biradical Systems.

    PubMed

    Shen, Jun; Piecuch, Piotr

    2012-12-11

    We have recently developed a flexible form of the method of moments of coupled-cluster (CC) equations and the CC(P;Q) hierarchy, which enable one to correct the CC and equation-of-motion CC energies obtained with unconventional truncations in the cluster and excitation operators [Shen, J.; Piecuch, P. Chem. Phys.2012, 401, 180; J. Chem. Phys.2012, 136, 144104]. One of the CC(P;Q) methods is a novel hybrid scheme, abbreviated as CC(t;3), in which the results of CC calculations with singles, doubles, and active-space triples, termed CCSDt, are corrected for the triple excitations missing in CCSDt using the expressions that are reminiscent of the completely renormalized (CR) CC approach known as CR-CC(2,3). We demonstrate that the total electronic energies of the lowest singlet and triplet states, and the singlet-triplet gaps in biradical systems, including methylene, (HFH)(-), and trimethylenemethane, resulting from the CC(t;3) calculations agree with those obtained with the full CC approach with singles, doubles, and triples to within fractions of a millihartree, improving the results of the noniterative triples CCSD(T), CCSD(2)T, and CR-CC(2,3) and hybrid CCSD(T)-h calculations, and competing with the best multireference CC data.

  13. Use of autologous conditioned serum (Orthokine®) for the treatment of the dege-nerative osteoarthritis of the temporomandibular joint. Review of the literature

    PubMed Central

    Álvarez-Camino, Juan C.; Vázquez-Delgado, Eduardo

    2013-01-01

    Objectives: Treatment of osteoarthritis (OA) using autologous conditioned serum (ACS) has become in recent years an alternative to consider in the approach of the degenerative joint disease of the knee. There is no support in the literature for the use of ACS for the treatment of OA of the temporomandibular joint (TMJ), although the promising results obtained in human patients with knee joint disease as well as in animal studies are opening the way for its use at the TMJ. The aim of this paper is to conduct a review of the published literature regarding the use of the ACS for the treatment of OA in humans, considering the level of scientific evidence, and following the principles of the evidence-based medicine and dentistry. Material and Methods: A PubMed-MEDLINE search was carried out of articles published between 1980 and 2011. After an initial search, a total of 102 articles were obtained, followed by a selection of the most relevant articles according to the topic; a total of 8 articles were selected, which were stratified according to their level of scientific evidence using SORT criteria (Strength of Recommendation Taxonomy). Results: At the time of this review, there is no available literature referring the use of ACS at the TMJ. However, the use of the ACS in other joints is well documented, both experimentally and clinically, in humans and animals. The reviewed articles, with a level of evidence 1 and 2 according to the SORT criteria, have generally promising results. Discussion and Conclusions: The use of ACS in the treatment of OA in joints other than the TMJ, is endorsed by the level of evidence found in the literature, which opens the door to future studies to determine the feasibility of the use of the ACS in the treatment of degenerative OA that affects TMJ. Key words:Osteoarthritis, temporomandibular joint, autologous conditioned serum. PMID:23524415

  14. Incidental Malignancies identified during staging for Prostate Cancer with (68)Ga -PSMA HBED-CC PET imaging.

    PubMed

    Joshi, Andre; Nicholson, Cheryl; Rhee, Handoo; Gustafson, Sonja; Miles, Ken; Vela, Ian

    2017-03-20

    The rapid uptake of 68Ga Prostate-Specific Membrane Antigen (PSMA) HBED-CC PET imaging for prostate cancer staging has led to concerns regarding its specificity, with uptake in both malignant and non-malignant tissues. We describe three separate malignancies identified on 68Ga PSMA HBED-CC PET imaging. The misnomer of "prostate specific membrane antigen" is demonstrated by this case and highlights the importance of continued investigation of the potential role for 68Ga PSMA HBED-CC PET in other malignancies.

  15. New Joint Sealants. Criteria, Design and Materials.

    ERIC Educational Resources Information Center

    Building Research Inst., Inc., Washington, DC.

    Contents include--(1) sealing concrete joints, (2) sealing glass and metal joints, (3) metal and glass joint sealants from a fabricator's viewpoint, (4) a theory of adhesion for joint sealants, (5) geometry of simple joint seals under strain, (6) joint sealant specifications from a manufacturer's viewpoint, (7) joint sealant requirements from an…

  16. Experimental and theoretical study of AC electrical conduction mechanisms of semicrystalline parylene C thin films.

    PubMed

    Kahouli, Abdelkader; Sylvestre, Alain; Jomni, Fethi; Yangui, Béchir; Legrand, Julien

    2012-01-26

    The electrical conduction mechanisms of semicrystalline thermoplastic parylene C (-H(2)C-C(6)H(3)Cl-CH(2)-)(n) thin films were studied in large temperature and frequency regions. The alternative current (AC) electrical conduction in parylene C is governed by two processes which can be ascribed to a hopping transport mechanism: correlated barrier hopping (CBH) model at low [77-155 K] and high [473-533 K] temperature and the small polaron tunneling mechanism (SPTM) from 193 to 413 K within the framework of the universal law of dielectric response. The conduction mechanism is explained with the help of Elliot's theory, and the Elliot's parameters are determined. From frequency- and temperature-conductivity characteristics, the activation energy is found to be 1.27 eV for direct current (DC) conduction interpreted in terms of ionic conduction mechanism. The power law dependence of AC conductivity is interpreted in terms of electron hopping with a density N(E(F)) (~10(18) eV cm(-3)) over a 0.023-0.03 eV high barrier across a distance of 1.46-1.54 Å.

  17. Examining the knee joint.

    PubMed

    Monk, Daniel

    2013-04-01

    Appropriate history taking and examination can ensure accurate diagnosis of common knee problems, and rapid and effective interventions or referral to orthopaedic specialists. This article describes the anatomy of the knee joint and discusses relevant history taking, the examination process, special tests and radiology, as well as common knee injuries and their management.

  18. Jointness: A Selected Bibliography

    DTIC Science & Technology

    2007-08-01

    Straus, Giroux, 2000. (UA23 .O94 2000) Perry, Mark. Four Stars. Boston: Houghton Mifflin, 1989. 412pp. (UA23.7 .P47 1989) 4 Quinn , Dennis J., ed...U.S. Naval Institute 131 (June 2005): 77-79. ProQuest 23 Strabbing, Timothy R., and Elliot L. Ackerman. "Preparing Lieutenants for the Joint

  19. Clad metal joint closure

    SciTech Connect

    Siebert, O.W.

    1985-04-09

    A plasma arc spray overlay of cladding metals is used over joints between clad metal pieces to provide a continuous cladding metal surface. The technique permits applying an overlay of a high melting point cladding metal to a cladding metal surface without excessive heating of the backing metal.

  20. Joint Operation Planning

    DTIC Science & Technology

    2006-12-26

    feasibility — only then does he issue an order.” General Mathew B. Ridgway The Korean War, 1967 SECTION A. JOINT STRATEGIC PLANNING — TYPES AND SCOPE 1...necessary. Meanwhile from the west would come the U.S. (sic) Army’s power punch. Looking at [Commander, XVIII Airborne Corps, Lieutenant General] Gary

  1. Geomechanical Response of Jointed Caprock During CO2 Geological Sequestration

    NASA Astrophysics Data System (ADS)

    Newell, P.; Martinez, M. J.; Bishop, J. E.

    2014-12-01

    Geological sequestration of CO2 refers to the injection of supercritical CO2 into deep reservoirs trapped beneath a low-permeability caprock formation. Maintaining caprock integrity during the injection process is the most important factor for a successful injection. In this work we evaluate the potential for jointed caprock during injection scenarios using coupled three-dimensional multiphase flow and geomechanics modeling. Evaluation of jointed/fractured caprock systems is of particular concern to CO2 sequestration because creation or reactivation of joints (mechanical damage) can lead to enhanced pathways for leakage. In this work, we use an equivalent continuum approach to account for the joints within the caprock. Joint's aperture and non-linear stiffness of the caprock will be updated dynamically based on the effective normal stress. Effective permeability field will be updated based on the joints' aperture creating an anisotropic permeability field throughout the caprock. This feature would add another coupling between the solid and fluid in addition to basic Terzaghi's effective stress concept. In this study, we evaluate the impact of the joint's orientation and geometry of caprock and reservoir layers on geomechanical response of the CO2 geological systems. This work is supported as part of the Center for Frontiers of Subsurface Energy Security, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Award Number DE-SC0001114. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  2. Heterologous Quaternary Structure of CXCL12 and its Relationship to the CC Chemokine Family

    SciTech Connect

    Murphy, J.; Yuan, H; Kong, Y; Xiong, Y; Lolis, E

    2010-01-01

    X-ray crystallographic studies reveal that CXCL12 is able to form multiple dimer types, a traditional CXC dimer and a 'CC-like' form. Phylogenetic analysis of all known human chemokines demonstrates CXCL12 is more closely related to the CC chemokine class than other CXC chemokines. These observations indicate that CXCL12 contains genomic and structural elements characteristic of both CXC and CC chemokines.Chemokines are members of a superfamily of proteins involved in the migration of cells to the proper anatomical position during embryonic development or in response to infection or stress during an immune response. There are two major (CC and CXC) and two minor (CX3C and XC) families based on the sequence around the first conserved cysteine. The topology of all structures is essentially identical with a flexible N-terminal region of 3-8 amino acids, a 10-20 residue N-terminal loop, a short 3{sub 10}-helix, three {beta}-strands, and a {alpha}-helix. The major consequence of the subtle difference between the families occurs at the oligomeric level. Monomers of the CC, CXC, and CX3C families form dimers in a family-specific manner. The XCL1 chemokine is a monomer that can interconvert between two folded states. All chemokines activate GPCRs according to family-specificity, however there are a few examples of chemokines crossing the family boundary to function as antagonists. A two-stage mechanism for chemokine activation of GPCRs has been proposed. The N-terminal region of the receptor interacts with the chemokine, followed by receptor activation by the chemokine N-terminal region. Monomeric chemokines have been demonstrated to be the active form for receptor function. There are numerous examples of both chemokines and their receptors forming dimers. While family-specific dimerization may be an attractive explanation for why specific chemokines only activate GPCRs within their own family, the role of dimers in the function of chemokines has not been resolved. Given

  3. Radar and optical observations and physical modeling of triple near-Earth Asteroid (136617) 1994 CC

    NASA Astrophysics Data System (ADS)

    Brozović, Marina; Benner, Lance A. M.; Taylor, Patrick A.; Nolan, Michael C.; Howell, Ellen S.; Magri, Christopher; Scheeres, Daniel J.; Giorgini, Jon D.; Pollock, Joseph T.; Pravec, Petr; Galád, Adrián; Fang, Julia; Margot, Jean-Luc; Busch, Michael W.; Shepard, Michael K.; Reichart, Daniel E.; Ivarsen, Kevin M.; Haislip, Joshua B.; LaCluyze, Aaron P.; Jao, Joseph; Slade, Martin A.; Lawrence, Kenneth J.; Hicks, Michael D.

    2011-11-01

    We report radar, photometric, and spectroscopic observations of near-Earth Asteroid (136617) 1994 CC. The radar measurements were obtained at Goldstone (8560 MHz, 3.5 cm) and Arecibo (2380 MHz, 12.6 cm) on 9 days following the asteroid's approach within 0.0168 AU on June 10, 2009. 1994 CC was also observed with the Panchromatic Robotic Optical Monitoring and Polarimetry Telescopes (PROMPT) on May 21 and June 1-3. Visible-wavelength spectroscopy was obtained with the 5-m Hale telescope at Palomar on August 25. Delay-Doppler radar images reveal that 1994 CC is a triple system; along with (153591) 2001 SN263, this is only the second confirmed triple in the near-Earth population. Photometry obtained with PROMPT yields a rotation period for the primary P = 2.38860 ± 0.00009 h and a lightcurve amplitude of ˜0.1 mag suggesting a shape with low elongation. Hale telescope spectroscopy indicates that 1994 CC is an Sq-class object. Delay-Doppler radar images and shape modeling reveal that the primary has an effective diameter of 0.62 ± 0.06 km, low pole-on elongation, few obvious surface features, and a prominent equatorial ridge and sloped hemispheres that closely resemble those seen on the primary of binary near-Earth Asteroid (66391) 1999 KW4. Detailed orbit fitting reported separately by Fang et al. (Fang, J., Margot, J.-L., Brozovic, M., Nolan, M.C., Benner, L.A.M., Taylor, P.A. [2011]. Astron. J. 141, 154-168) gives a mass of the primary of 2.6 × 10 11 kg that, coupled with the effective diameter, yields a bulk density of 2.1 ± 0.6 g cm -3. The images constrain the diameters of the inner and outer satellites to be 113 ± 30 m and 80 ± 30 m, respectively. The inner satellite has a semimajor axis of ˜1.7 km (˜5.5 primary radii), an orbital period of ˜30 h, and its Doppler dispersion suggests relatively slow rotation, 26 ± 12 h, consistent with spin-orbit lock. The outer satellite has an orbital period of ˜9 days and a rotation period of 14 ± 7 h, establishing

  4. AC power generation from microbial fuel cells

    NASA Astrophysics Data System (ADS)

    Lobo, Fernanda Leite; Wang, Heming; Forrestal, Casey; Ren, Zhiyong Jason

    2015-11-01

    Microbial fuel cells (MFCs) directly convert biodegradable substrates to electricity and carry good potential for energy-positive wastewater treatment. However, the low and direct current (DC) output from MFC is not usable for general electronics except small sensors, yet commercial DC-AC converters or inverters used in solar systems cannot be directly applied to MFCs. This study presents a new DC-AC converter system for MFCs that can generate alternating voltage in any desired frequency. Results show that AC power can be easily achieved in three different frequencies tested (1, 10, 60 Hz), and no energy storage layer such as capacitors was needed. The DC-AC converter efficiency was higher than 95% when powered by either individual MFCs or simple MFC stacks. Total harmonic distortion (THD) was used to investigate the quality of the energy, and it showed that the energy could be directly usable for linear electronic loads. This study shows that through electrical conversion MFCs can be potentially used in household electronics for decentralized off-grid communities.

  5. Organic magnetoresistance under resonant ac drive

    NASA Astrophysics Data System (ADS)

    Roundy, R. C.; Raikh, M. E.

    2013-09-01

    Motivated by a recent experiment, we develop a theory of organic magnetoresistance (OMAR) in the presence of a resonant ac drive. To this end, we perform a thorough analysis of the dynamics of ac-driven electron-hole polaron pair in magnetic field, which is a sum of external and random hyperfine fields. Resonant ac drive affects the OMAR by modifying the singlet content of the eigenmodes. This, in turn, leads to the change of recombination rate, and ultimately, to the change of the spin-blocking that controls the current. Our analysis demonstrates that, upon increasing the drive amplitude, the blocking eigenmodes of the triplet type acquire a singlet admixture and become unblocking. Most surprisingly, the opposite process goes in parallel: new blocking modes emerge from nonblocking precursors as the drive increases. These emergent blocking modes are similar to subradiant modes in the Dicke effect. A nontrivial evolution of eigenmodes translates into a nontrivial behavior of OMAR with the amplitude of the ac drive: it is initially linear, then passes through a maximum, drops, and finally saturates.

  6. A dry-cooled AC quantum voltmeter

    NASA Astrophysics Data System (ADS)

    Schubert, M.; Starkloff, M.; Peiselt, K.; Anders, S.; Knipper, R.; Lee, J.; Behr, R.; Palafox, L.; Böck, A. C.; Schaidhammer, L.; Fleischmann, P. M.; Meyer, H.-G.

    2016-10-01

    The paper describes a dry-cooled AC quantum voltmeter system operated up to kilohertz frequencies and 7 V rms. A 10 V programmable Josephson voltage standard (PJVS) array was installed on a pulse tube cooler (PTC) driven with a 4 kW air-cooled compressor. The operating margins at 70 GHz frequencies were investigated in detail and found to exceed 1 mA Shapiro step width. A key factor for the successful chip operation was the low on-chip power consumption of 65 mW in total. A thermal interface between PJVS chip and PTC cold stage was used to avoid a significant chip overheating. By installing the cryocooled PJVS array into an AC quantum voltmeter setup, several calibration measurements of dc standards and calibrator ac voltages up to 2 kHz frequencies were carried out to demonstrate the full functionality. The results are discussed and compared to systems with standard liquid helium cooling. For dc voltages, a direct comparison measurement between the dry-cooled AC quantum voltmeter and a liquid-helium based 10 V PJVS shows an agreement better than 1 part in 1010.

  7. C=C π bond modified graphitic carbon nitride films for enhanced photoelectrochemical cell performance.

    PubMed

    Bian, Juncao; Xi, Lifei; Li, Jianfu; Xiong, Ze; Huang, Chao; Lange, Kathrin; Tang, Jinyao; Shalom, Menny; Zhang, Rui-Qin

    2017-03-08

    Applications of graphitic carbon nitride (g-CN) in photoelectrochemical and optoelectronic devices are still hindered due to the difficulties in synthesis of g-CN films with tunable chemical, physical and catalytic properties. Herein we present a general method to alter the electronic and photoelectrochemical properties of g-CN films by annealing. We found that N atoms can be removed from the g-CN networks after annealing treatment. Assisted by theoretical calculations, we confirm that upon appropriate N removal, the adjacent C atoms will form new C=C π bonds. Detailed calculations demonstrate that the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) are localized at the structure unit with C=C π bonds and the electrons are more delocalized. Valence band X-ray photoelectron spectroscopy spectra together with the absorption spectra unveil that the structure changes result in the alteration of the g-CN energy levels and position of band edges. Our results show that the photocurrent density of the annealed g-CN film is doubled compared with the pristine one, thanks to the better charge separation and transport within the film induced by the new C=C π bonds. An ultrathin TiO2 film (2.2 nm) is applied as stabilizer and the photocurrent density is kept at 0.05 mA/cm2 at 1.23 V vs. reversible hydrogen electrode after two-cycle stability assessment. This work enables the applications of g-CN films in many electronic and optoelectronic devices.

  8. A compendium of the data used with the SYVAC3-CC3 system model

    SciTech Connect

    Szekely, J.G.; Stephens, M.E.; Witzke, K.H.; Melnyk, T.W.; LeNeveu, D.M.; McConnell, D.B.; Goodwin, B.W.

    1994-12-01

    AECL is evaluating a concept for disposing of nuclear fuel waste from Canada`s CANDU reactors deep in plutonic rock of the Canadian Shield. As part of this evaluation, AECL has developed models of the physical, chemical, geological and biological processes that could occur in a sealed disposal vault designed to limit transport of contaminants to the accessible environment over thousands of years. The mathematical models of the transport of radionuclides and toxic chemicals from nuclear fuel waste to the environment are incorporated into a computer model named the Systems Variability Analysis Code, Generation 3, and Canadian Concept Model, Generation 3 (SYVAC3-CC3). This report reproduces the data in the master database used by SYVAC3-CC3 for the postclosure assessment of deep geological disposal. These data are derived from a major program of laboratory and field studies conducted by AECL Research over the past fifteen years, including the investigations at an Underground Research Laboratory excavated to a depth of 450 meters in a large granitic batholith within the Whiteshell Research Area near Lac du Bonnet, Manitoba; conceptual engineering studies; detailed analyses of specific features, events and processes; and published literature. The data represent characteristics of a hypothetical vault, certain geological characteristics of the Whiteshell Research Area, and a general surface environment with a human population living a rural lifestyle on a portion of the Canadian Shield in central Canada. The data are stored in a master database, which is used with a suite of computer programs to create the input data files used by SYVAC3-CC3.

  9. Stability of DNA duplexes containing GG, CC, AA, and TT mismatches.

    PubMed

    Tikhomirova, Anna; Beletskaya, Irina V; Chalikian, Tigran V

    2006-09-05

    We employed salt-dependent differential scanning calorimetric measurements to characterize the stability of six oligomeric DNA duplexes (5'-GCCGGAXTGCCGG-3'/5'-CCGGCAYTCCGGC-3') that contain in the central XY position the GC, AT, GG, CC, AA, or TT base pair. The heat-induced helix-to-coil transitions of all the duplexes are associated with positive changes in heat capacity, DeltaC(p), ranging from 0.43 to 0.53 kcal/mol. Positive values of DeltaC(p) result in strong temperature dependences of changes in enthalpy, DeltaH degrees, and entropy, DeltaS degrees , accompanying duplex melting and cause melting free energies, DeltaG degrees, to exhibit characteristically curved shapes. These observations suggest that DeltaC(p) needs to be carefully taken into account when the parameters of duplex stability are extrapolated to temperatures distant from the transition temperature, T(M). Comparison of the calorimetric and van't Hoff enthalpies revealed that none of the duplexes studied in this work exhibits two-state melting. Within the context of the central AXT/TYA triplet, the thermal and thermodynamic stabilities of the duplexes in question change in the following order: GC > AT > GG > AA approximately TT > CC. Our estimates revealed that the thermodynamic impact of the GG, AA, and TT mismatches is confined within the central triplet. In contrast, the thermodynamic impact of the CC mismatch propagates into the adjacent helix domains and may involve 7-9 bp. We discuss implications of our results for understanding the origins of initial recognition of mismatched DNA sites by enzymes of the DNA repair machinery.

  10. LA-MRSA CC398 differ from classical community acquired-MRSA and hospital acquired-MRSA lineages: functional analysis of infection and colonization processes.

    PubMed

    Ballhausen, Britta; Jung, Philipp; Kriegeskorte, André; Makgotlho, Phuti Edward; Ruffing, Ulla; von Müller, Lutz; Köck, Robin; Peters, Georg; Herrmann, Mathias; Ziebuhr, Wilma; Becker, Karsten; Bischoff, Markus

    2014-10-01

    Livestock-associated methicillin-resistant Staphylococcus aureus (LA-MRSA) of the clonal complex (CC) 398 became primarily known as colonizers of livestock animals. In the past few years, they have been increasingly introduced into hospitals with subsequent emergence of human infections. However, the (re-)adaptation to the human host is only incompletely understood. This study aimed to assess virulence properties of LA-MRSA CC398 by functional modeling of infection and colonization processes. A selection of 15 human LA-MRSA CC398 isolates and 11 pig-colonizing isolates were characterized regarding their virulence capacities and compared with human isolates of hospital-acquired (HA)-MRSA (CC5, CC22 and CC45) and community-associated (CA)-MRSA (CC8, CC30 and CC80) clonal lineages. Our investigations demonstrated that LA-MRSA CC398 adhered less efficient to human cells and human/bovine plasma fibronectin than CA-MRSA and HA-MRSA isolates. In contrast, the LA-MRSA CC398 isolates revealed a high cytotoxic potential comparable to certain CA-MRSA. Comparing the most prevalent LA-MRSA CC398 spa types (t011, t034, t108), isolates associated with spa t108 showed an increased adhesive and invasive potential paired with an increased ability to evade phagocytosis. The results underline both the pathogenic potential of LA-MRSA in general and the heterogeneity within the CC398 clade regarding the virulence characteristics of CC398 subpopulations. Assuming an ongoing (re-)adaptation to the human host combined with a huge reservoir of LA-MRSA CC398 in livestock and constant zoonotic transmission, the LA-MRSA CC398 lineage has the potential to pose a serious threat to human health.

  11. Steroid injections - tendon, bursa, joint

    MedlinePlus

    ... ency/article/007678.htm Steroid injections - tendon, bursa, joint To use the sharing features on this page, ... often painful. It can be injected into a joint, tendon, or bursa. Description Your health care provider ...

  12. Shoulder Joint For Protective Suit

    NASA Technical Reports Server (NTRS)

    Kosmo, Joseph J.; Smallcombe, Richard D.

    1994-01-01

    Shoulder joint allows full range of natural motion: wearer senses little or no resisting force or torque. Developed for space suit, joint offers advantages in protective garments for underwater work, firefighting, or cleanup of hazardous materials.

  13. Activation of Aromatic C-C Bonds of 2,2'-Bipyridine Ligands.

    PubMed

    Fombona, Sergio; Espinal-Viguri, Maialen; Huertos, Miguel A; Díaz, Jesús; López, Ramón; Menéndez, M Isabel; Pérez, Julio; Riera, Lucía

    2016-11-21

    4,4'-Disubstituted-2,2'-bipyridine ligands coordinated to Mo(II) and Re(I) cationic fragments become dearomatized by an intramolecular nucleophilic attack from a deprotonated N-alkylimidazole ligand in cis disposition. The subsequent protonation of these neutral complexes takes place on a pyridine carbon atom rather than at nitrogen, weakening an aromatic C-C bond and affording a dihydropyridyl moiety. Computational calculations allowed for the rationalization of the formation of the experimentally obtained products over other plausible alternatives.

  14. SALT spectroscopic classification of ASASSN-16cc (SN 2016aqf) as a type-II supernova

    NASA Astrophysics Data System (ADS)

    Jha, S. W.; Miszalski, B.

    2016-02-01

    We obtained SALT (+RSS) spectroscopy of ASASSN-16cc (SN 2016aqf) on 2016 February 27.9 UT, covering the wavelength range 360-920 nm. The spectrum features a blue continuum with prominent P-Cygni lines of H and He. Cross-correlation of the spectrum with a template library using SNID (Blondin & Tonry 2007, ApJ, 666, 1024) shows a good match to the type-IIP SN 2014et at -3 days, confirming the results of Hosseinzadeh et al. (ATel 8748).

  15. An erbium-based bifuctional heterogeneous catalyst: a cooperative route towards C-C bond formation.

    PubMed

    Oliverio, Manuela; Costanzo, Paola; Macario, Anastasia; De Luca, Giuseppina; Nardi, Monica; Procopio, Antonio

    2014-07-15

    Heterogeneous bifuctional catalysts are multifunctional synthetic catalysts enabling efficient organic transformations by exploiting two opposite functionalities without mutual destruction. In this paper we report the first Er(III)-based metallorganic heterogeneous catalyst, synthesized by post-calcination MW-assisted grafting and modification of the natural aminoacid L-cysteine. The natural acid-base distance between sites was maintained to assure the cooperation. The applicability of this new bifunctional heterogeneous catalyst to C-C bond formation and the supposed mechanisms of action are discussed as well.

  16. Validation Studies for CHRISTINE-CC Using a Ka-Band Coupled-Cavity TWT

    DTIC Science & Technology

    2006-04-01

    Cavity TWT for 29-31 GHz Figure 3: Output power vs. input power at f=30.0 Communications Systems," I Ith Ka and Broadband GHz for the VTA-6430A1 Ka...Coupled-Cavity TWT DISTRIBUTION: Approved for public release, distribution unlimited This paper is part of the following report: TITLE: 2006 IEEE...Studies for CHRISTINE-CC Using a Ka-Band Coupled-Cavity TWT * D. Chernin, D. Dialetis, T. M. Antonsen, Jr.t, Science Applications International Corp McLean

  17. A tracking detector to study O(1 GeV) νμ CC interactions

    NASA Astrophysics Data System (ADS)

    Bernardini, P.; Cecchini, S.; Cindolo, F.; D'Antone, I.; Degli Esposti, L.; Lax, I.; Mandrioli, G.; Marsella, G.; Mauri, N.; Pasqualini, L.; Patrizii, L.; Pozzato, M.; Sirri, G.; Surdo, A.; Tenti, M.

    2017-03-01

    A tracking system composed of planes of triangular shape scintillator bars coupled to Silicon PhotoMultipliers in analog mode read-out has been developed for applications in neutrino experiments. A spatial resolution of O(1 mm) is required for the determination of momentum and charge of muons produced in νμ CC interactions at few GeV energy scale. The performance of the system has been studied by exposing it to charged particle beams at the CERN-PS. Preliminary results are discussed.

  18. Design of wireless temperature measurement system for piston based on CC2530

    NASA Astrophysics Data System (ADS)

    Rongyu, Ge; Jin, Wang; Yimin, Wu; Guodong, Wu

    2016-11-01

    Temperature measurement of piston is important to analysis its temperature field. Since it is difficult to extract the temperature signal in the piston by hard line, a multi-channel wireless measurement system of piston temperature is developed. The wireless SOC CC2530 is used. NTC thermistors with glass package are selected as temperature sensors. The realization of hardware and the design of software flowchart are explained in detail. The actual test demonstrates that the system has high measurement accuracy and strong practical value.

  19. Formation of C-C bonds via ruthenium-catalyzed transfer hydrogenation().

    PubMed

    Moran, Joseph; Krische, Michael J

    2012-01-01

    Ruthenium-catalyzed transfer hydrogenation of diverse π-unsaturated reactants in the presence of aldehydes provides products of carbonyl addition. Dehydrogenation of primary alcohols in the presence of the same π-unsaturated reactants provides identical products of carbonyl addition. In this way, carbonyl addition is achieved from the alcohol or aldehyde oxidation level in the absence of stoichiometric organometallic reagents or metallic reductants. In this account, the discovery of ruthenium-catalyzed C-C bond-forming transfer hydrogenations and the recent development of diastereo- and enantioselective variants are discussed.

  20. Determination of the static performance of a Cuyuna cc model UL-430RR engine

    NASA Technical Reports Server (NTRS)

    Roskam, J.

    1983-01-01

    The results of static performance tests were carried out on an ultralight engine. A Cuyuna 430 cc, 2 stroke, 2 cylinder model was used to measure thrust, torque, propeller RPM, fuel flow, cylinder head temperature, and change in pressure through the propeller. Measurement of each of the above parameters was taken at specific values of RPM. The propeller's RPM's ranged from idle at approximately 750 RPM to a maximum value of 2810 RPM. The test results were then manipulated to obtain thrust coefficient, power coefficient, shaft horse power, and shaft specific fuel consumption.

  1. Caregiver's concerns-quality of life scale (CC-QoLS): development and evaluation of psychometric properties.

    PubMed

    Unwin, Gemma; Deb, Shoumitro

    2014-10-01

    We have developed a Caregiver's Concerns-Quality of Life Scale (CC-QoLS) for adults with intellectual disabilities (ID) who exhibit aggressive behaviour. The CC-QoLS is a brief (8 items in each subscale, CC and QoL respectively) proxy measure completed by caregivers. This is a specific health related quality of life instrument (HRQoL) combined with measures of caregiver's concerns for use as an outcome measure to assess clinical and cost effectiveness of interventions for aggression in adults with ID. The CC-QoLS was found to have good face validity and very good test-retest reliability with an ICC of 0.81 for CC (range 0.46-0.83 across items) and 0.80 for QoL (range 0.65-0.81 across items). Similarly, the scale had good inter-rater reliability with an ICC of 0.67 for CC (range 0.31-0.63 across items) and 0.63 for QoL (range 0.31-0.65 across items). Internal consistency for each subscale was also good (Cronbach's alpha was 0.85 for CC and 0.80 for QoL; Split-half Spearman-Brown was 0.81 for CC and 0.70 for QoL). Furthermore, the scale showed good concurrent validity with measures of severity of aggressive behaviour, namely Modified Overt Aggression Scale (MOAS) (CC: r=0.4; p≤0.01 and QoL: r=-0.2; p≤0.05) and Aberrant Behavior Checklist-Irritability subscale (ABC-I) (CC: r=0.5; p≤0.01 and QoL: r=-0.02; p≤0.05) as well as Caregiver's Uplift and Burden Scale score (<0.05). We believe that the CC-QoLS is a user friendly, easy to complete, first-ever HRQoL measure for adults with ID and aggressive behaviour with very good psychometric properties.

  2. Determination of Parachute Joint Factors using Seam and Joint Testing

    NASA Technical Reports Server (NTRS)

    Mollmann, Catherine

    2015-01-01

    This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

  3. Planning for Victory: Joint Synchronization

    DTIC Science & Technology

    1993-02-22

    Desert Storm . . . .. 13 V A JOINT SYNCHRONIZATION MATRIX .. ........ .. 16 Proposed Synchronization Matrixes Joint Sync Matrix: D-day, 1944 . . .. 16...campaigns. I will offer two such proposals. Joint Sync Matrix: D-day, 1944 . Figure 2 is offered as one proposal of how a joint synchronization matrix...CHANNEL sweep CENTRAL CHANNEL commence sweep AfW ALLIED completeI CHERBOURG-LE HAVRE FLEET sweep UTAH OMAHA GOLD JUNO SWORD ASUW SWEEPS ALLIED

  4. Deficiencies in Indian Joint Operations

    DTIC Science & Technology

    2016-05-26

    India’s Sri Lanka Fiasco: Peace Keepers at War (New Delhi: Vision Books, 1990), 137. 3...Joint Force 2020 (Washington, DC: Government Printing Office, 10 September 2012), 16; Indian Army Doctrine, Part II Conduct of Operations, 1st ed...the US principles of joint operations. 11 JP 3-0, I-1. 12 Capstone Concept for Joint Operations: Joint Force 2020 , 16. 13 Indian Army Doctrine, Part

  5. Permanent draft genome sequences of the symbiotic nitrogen fixing Ensifer meliloti strains BO21CC and AK58

    PubMed Central

    Galardini, Marco; Bazzicalupo, Marco; Biondi, Emanuele; Brambilla, Eveline; Brilli, Matteo; Bruce, David; Chain, Patrick; Chen, Amy; Daligault, Hajnalka; Davenport, Karen Walston; Deshpande, Shweta; Detter, John C.; Goodwin, Lynne A.; Han, Cliff; Han, James; Huntemann, Marcel; Ivanova, Natalia; Klenk, Hans-Peter; Kyrpides, Nikos C.; Markowitz, Victor; Mavrommatis, Kostas; Mocali, Stefano; Nolan, Matt; Pagani, Ioanna; Pati, Amrita; Pini, Francesco; Pitluck, Sam; Spini, Giulia; Szeto, Ernest; Teshima, Hazuki; Woyke, Tanja; Mengoni, Alessio

    2013-01-01

    Ensifer (syn. Sinorhizobium) meliloti is an important symbiotic bacterial species that fixes nitrogen. Strains BO21CC and AK58 were previously investigated for their substrate utilization and their plant-growth promoting abilities showing interesting features. Here, we describe the complete genome sequence and annotation of these strains. BO21CC and AK58 genomes are 6,985,065 and 6,974,333 bp long with 6,746 and 6,992 genes predicted, respectively. PMID:24976889

  6. Permanent draft genome sequences of the symbiotic nitrogen fixing Ensifer meliloti strains BO21CC and AK58.

    PubMed

    Galardini, Marco; Bazzicalupo, Marco; Biondi, Emanuele; Brambilla, Eveline; Brilli, Matteo; Bruce, David; Chain, Patrick; Chen, Amy; Daligault, Hajnalka; Davenport, Karen Walston; Deshpande, Shweta; Detter, John C; Goodwin, Lynne A; Han, Cliff; Han, James; Huntemann, Marcel; Ivanova, Natalia; Klenk, Hans-Peter; Kyrpides, Nikos C; Markowitz, Victor; Mavrommatis, Kostas; Mocali, Stefano; Nolan, Matt; Pagani, Ioanna; Pati, Amrita; Pini, Francesco; Pitluck, Sam; Spini, Giulia; Szeto, Ernest; Teshima, Hazuki; Woyke, Tanja; Mengoni, Alessio

    2013-12-20

    Ensifer (syn. Sinorhizobium) meliloti is an important symbiotic bacterial species that fixes nitrogen. Strains BO21CC and AK58 were previously investigated for their substrate utilization and their plant-growth promoting abilities showing interesting features. Here, we describe the complete genome sequence and annotation of these strains. BO21CC and AK58 genomes are 6,985,065 and 6,974,333 bp long with 6,746 and 6,992 genes predicted, respectively.

  7. CC-223, a Potent and Selective Inhibitor of mTOR Kinase: In Vitro and In Vivo Characterization.

    PubMed

    Mortensen, Deborah S; Fultz, Kimberly E; Xu, Shuichan; Xu, Weiming; Packard, Garrick; Khambatta, Godrej; Gamez, James C; Leisten, Jim; Zhao, Jingjing; Apuy, Julius; Ghoreishi, Kamran; Hickman, Matt; Narla, Rama Krishna; Bissonette, Rene; Richardson, Samantha; Peng, Sophie X; Perrin-Ninkovic, Sophie; Tran, Tam; Shi, Tao; Yang, Wen Qing; Tong, Zeen; Cathers, Brian E; Moghaddam, Mehran F; Canan, Stacie S; Worland, Peter; Sankar, Sabita; Raymon, Heather K

    2015-06-01

    mTOR is a serine/threonine kinase that regulates cell growth, metabolism, proliferation, and survival. mTOR complex-1 (mTORC1) and mTOR complex-2 (mTORC2) are critical mediators of the PI3K-AKT pathway, which is frequently mutated in many cancers, leading to hyperactivation of mTOR signaling. Although rapamycin analogues, allosteric inhibitors that target only the mTORC1 complex, have shown some clinical activity, it is hypothesized that mTOR kinase inhibitors, blocking both mTORC1 and mTORC2 signaling, will have expanded therapeutic potential. Here, we describe the preclinical characterization of CC-223. CC-223 is a potent, selective, and orally bioavailable inhibitor of mTOR kinase, demonstrating inhibition of mTORC1 (pS6RP and p4EBP1) and mTORC2 [pAKT(S473)] in cellular systems. Growth inhibitory activity was demonstrated in hematologic and solid tumor cell lines. mTOR kinase inhibition in cells, by CC-223, resulted in more complete inhibition of the mTOR pathway biomarkers and improved antiproliferative activity as compared with rapamycin. Growth inhibitory activity and apoptosis was demonstrated in a panel of hematologic cancer cell lines. Correlative analysis revealed that IRF4 expression level associates with resistance, whereas mTOR pathway activation seems to associate with sensitivity. Treatment with CC-223 afforded in vivo tumor biomarker inhibition in tumor-bearing mice, after a single oral dose. CC-223 exhibited dose-dependent tumor growth inhibition in multiple solid tumor xenografts. Significant inhibition of mTOR pathway markers pS6RP and pAKT in CC-223-treated tumors suggests that the observed antitumor activity of CC-223 was mediated through inhibition of both mTORC1 and mTORC2. CC-223 is currently in phase I clinical trials.

  8. 40 CFR 86.447-2006 - What provisions apply to motorcycle engines below 50 cc that are certified under the Small SI...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... engines below 50 cc that are certified under the Small SI program or the Recreational-vehicle program? 86... motorcycle engines below 50 cc that are certified under the Small SI program or the Recreational-vehicle... engine below 50 cc that is already certified to the requirements that apply to engines or vehicles...

  9. Phase 1 Program Joint Report

    NASA Technical Reports Server (NTRS)

    Nield, George C. (Editor); Vorobiev, Pavel Mikhailovich (Editor)

    1999-01-01

    This report consists of inputs from each of the Phase I Program Joint Working Groups. The Working Groups were tasked to describe the organizational structure and work processes that they used during the program, joint accomplishments, lessons learned, and applications to the International Space Station Program. This report is a top-level joint reference document that contains information of interest to both countries.

  10. Signaling networks in joint development.

    PubMed

    Salva, Joanna E; Merrill, Amy E

    2017-04-01

    Here we review studies identifying regulatory networks responsible for synovial, cartilaginous, and fibrous joint development. Synovial joints, characterized by the fluid-filled synovial space between the bones, are found in high-mobility regions and are the most common type of joint. Cartilaginous joints such as the intervertebral disc unite adjacent bones through either a hyaline cartilage or a fibrocartilage intermediate. Fibrous joints, which include the cranial sutures, form a direct union between bones through fibrous connective tissue. We describe how the distinct morphologic and histogenic characteristics of these joint classes are established during embryonic development. Collectively, these studies reveal that despite the heterogeneity of joint strength and mobility, joint development throughout the skeleton utilizes common signaling networks via long-range morphogen gradients and direct cell-cell contact. This suggests that different joint types represent specialized variants of homologous developmental modules. Identifying the unifying aspects of the signaling networks between joint classes allows a more complete understanding of the signaling code for joint formation, which is critical to improving strategies for joint regeneration and repair. Developmental Dynamics 246:262-274, 2017. © 2016 Wiley Periodicals, Inc.

  11. Double slotted socket spherical joint

    DOEpatents

    Bieg, Lothar F.; Benavides, Gilbert L.

    2001-05-22

    A new class of spherical joints is disclosed. These spherical joints are capable of extremely large angular displacements (full cone angles in excess of 270.degree.), while exhibiting no singularities or dead spots in their range of motion. These joints can improve or simplify a wide range of mechanical devices.

  12. Critical current degradation behaviour of GdBCO CC tapes in pure torsion and combined tension-torsion modes

    NASA Astrophysics Data System (ADS)

    Gorospe, Alking; Bautista, Zhierwinjay; Shin, Hyung-Seop

    2016-10-01

    Coated conductor (CC) tapes utilized in high-current-density superconducting cables are commonly subjected to different loading modes, primarily torsion and tension especially in the case of twisted stacked-tape cable. Torsion load can occur due to twisting along the length or when winding the CC tapes around a former, while tension load can occur due to pre-tension when coiled and as a hoop stress when the coil is energized. In this study, electromechanical properties of single CC tapes under torsion load were investigated using a new test apparatus. The results could provide basic information for cable designers to fully characterize stacked cables. Copper-electroplated and brass-laminated CC tapes fabricated with different deposition techniques were subjected to pure torsion and combined tension-torsion loading. The critical current, I c degradation behaviours of CC tapes under torsional deformation were examined. Also, the effect of further external lamination on the I c degradation behaviour of the CC tapes under such loading conditions was investigated. In the case of the combined tension-torsion test, short samples were subjected to twist pitches of 200 mm and 100 mm. Critical parameters including reversible axial stress and strain in such twist pitch conditions were also investigated.

  13. A High-resolution Isotopic Study of the Rotational Spectrum of c-C3H2

    NASA Astrophysics Data System (ADS)

    Spezzano, S.; Tamassia, F.; Thorwirth, S.; Thaddeus, P.; Gottlieb, C. A.; McCarthy, M. C.

    2012-05-01

    The rotational spectra of the normal and seven isotopic species of cyclopropenylidene c-C3H2 have been measured at high spectral resolution by Fourier transform microwave spectroscopy of a supersonic molecular beam between 10 and 43 GHz. Deuterium quadrupole coupling and carbon-13 spin-rotation hyperfine constants were determined in addition to the rotational constants. Quartic and sextic centrifugal distortion constants derived from 28 lines between 150 and 316 GHz of the doubly deuterated species c-C3D2 allow the rotational spectrum to be calculated to 0.5 km s-1 or better in equivalent radial velocity up to 500 GHz. Spectroscopic constants determined from four centimeter-wave and 19 millimeter-wave lines of the normal species c-C3H2, including 15 with sharp Lamb-dips, allow prediction of the most important astronomical transitions (i.e., those with ΔJ = 1 and Ka <= 3) to 0.05 km s-1 or better at 500 GHz. The doubly deuterated species is a good candidate for detection in cold dark clouds, because deuterium fractionation is high in c-C3H2 and lines of C3HD are fairly intense in these sources. An accurate empirical equilibrium structure of c-C3H2, derived from the experimental rotational constants of normal and isotopic c-C3H2, corrected for zero-point vibrational effects, is compared with previously reported structures.

  14. Cloning of two chemokine receptor homologs (CXC-R4 and CC-R7) in rainbow trout Oncorhynchus mykiss.

    PubMed

    Daniels, G D; Zou, J; Charlemagne, J; Partula, S; Cunningham, C; Secombes, C J

    1999-05-01

    Two rainbow trout chemokine receptors have been sequenced, with homology to CXC-R4 and CC-R7 molecules. The CXC-R4 sequence consisted of 1681 nucleotides, which translated into a mature protein of 357 amino acids, with 80.7% similarity to human CXC-R4. The CC-R7 sequence consisted of 2287 nucleotides, which translated into a 368-amino acid mature protein with 64.5% similarity to human CC-R7. Both sequences contained seven hydrophobic regions, representing the seven transmembrane domains (TM) typical of G-protein-coupled receptors. Extracellular cysteines, transmembrane prolines, and the DRY motif immediately following TM3 were conserved. Phylogenetic tree analysis revealed a tight clustering of trout CXC-R4 with CXC-R3-5 genes. Trout CC-R7 clustered with CC-R6-7 and CXC-R1-2. Reverse transcriptase-polymerase chain reaction analysis demonstrated a wide tissue distribution of CXC-R4 and CC-R7 message in trout, being present in head-kidney leukocytes, blood, gill, brain, spleen, and liver.

  15. Importance of Triples Contributions to NMR Spin-Spin Coupling Constants Computed at the CC3 and CCSDT Levels.

    PubMed

    Faber, Rasmus; Sauer, Stephan P A; Gauss, Jürgen

    2017-02-14

    We present the first analytical implementation of CC3 second derivatives using the spin-unrestricted approach. This allows, for the first time, the calculation of nuclear spin-spin coupling constants (SSCC) relevant to NMR spectroscopy at the CC3 level of theory in a fully analytical manner. CC3 results for the SSCCs of a number of small molecules and their fluorine substituted derivatives are compared with the corresponding coupled cluster singles and doubles (CCSD) results obtained using specialized basis sets. For one-bond couplings the change when going from CCSD to CC3 is typically 1-3%, but much higher corrections were found for (1)JCN in FCN, 15.7%, and (1)JOF in OF2, 6.4%. The changes vary significantly in the case of multibond couplings, with differences of up to 10%, and even 13.6% for (3)JFH in fluoroacetylene. Calculations at the coupled cluster singles, doubles, and triples (CCSDT) level indicate that the most important contributions arising from connected triple excitations in the coupled cluster expansion are accounted for at the CC3 level. Thus, we believe that the CC3 method will become the standard approach for the calculation of reference values of nuclear spin-spin coupling constants.

  16. Pharmacological targeting of the PDGF-CC signaling pathway for blood-brain barrier restoration in neurological disorders.

    PubMed

    Lewandowski, Sebastian A; Fredriksson, Linda; Lawrence, Daniel A; Eriksson, Ulf

    2016-11-01

    Neurological disorders account for a majority of non-malignant disability in humans and are often associated with dysfunction of the blood-brain barrier (BBB). Recent evidence shows that despite apparent variation in the origin of neural damage, the central nervous system has a common injury response mechanism involving platelet-derived growth factor (PDGF)-CC activation in the neurovascular unit and subsequent dysfunction of BBB integrity. Inhibition of PDGF-CC signaling with imatinib in mice has been shown to prevent BBB dysfunction and have neuroprotective effects in acute damage conditions, including traumatic brain injury, seizures or stroke, as well as in neurodegenerative diseases that develop over time, including multiple sclerosis and amyotrophic lateral sclerosis. Stroke and traumatic injuries are major risk factors for age-associated neurodegenerative disorders and we speculate that restoring BBB properties through PDGF-CC inhibition might provide a common therapeutic opportunity for treatment of both acute and progressive neuropathology in humans. In this review we will summarize what is known about the role of PDGF-CC in neurovascular signaling events and the variety of seemingly different neuropathologies it is involved in. We will also discuss the pharmacological means of therapeutic interventions for anti-PDGF-CC therapy and ongoing clinical trials. In summary: inhibition of PDGF-CC signaling can be protective for immediate injury and decrease the long-term neurodegenerative consequences.

  17. CC2D2A mutations in Meckel and Joubert syndromes indicate a genotype-phenotype correlation

    PubMed Central

    Mougou-Zerelli, Soumaya; Thomas, Sophie; Szenker, Emmanuelle; Audollent, Sophie; Elkhartoufi, Nadia; Babarit, Candice; Romano, Stéphane; Salomon, Rémi; Amiel, Jeanne; Esculpavit, Chantal; Gonzales, Marie; Escudier, Estelle; Leheup, Bruno; Loget, Philippe; Odent, Sylvie; Roume, Joëlle; Gérard, Marion; Delezoide, Anne-Lise; Khung, Suonavy; Patrier, Sophie; Cordier, Marie-Pierre; Bouvier, Raymonde; Martinovic, Jéléna; Gubler, Marie-Claire; Boddaert, Nathalie; Munnich, Arnold; Encha-Razavi, Férechté; Valente, Enza Maria; Saad, Ali; Saunier, Sophie; Vekemans, Michel; Attié-Bitach, Tania

    2009-01-01

    The Meckel syndrome (MKS) is a lethal fetal disorder characterized by diffuse renal cystic dysplasia, polydactyly, a brain malformation that is usually occipital encephalocele and/or vermian agenesis, with intrahepatic biliary duct proliferation. Joubert syndrome (JBS) is a viable neurological disorder with a characteristic “molar tooth sign” (MTS) on axial images reflecting cerebellar vermian hypoplasia/dysplasia. Both conditions are classified as ciliopathies with an autosomal recessive mode of inheritance. Allelism of MS and JBS has been reported for TMEM67/MKS3, CEP290/MKS4, and RPGRIP1L/MKS5. Recently, one homozygous splice mutation with a founder effect was reported in the CC2D2A gene in Finnish fetuses with MKS, defining the 6th locus for MKS. Shortly thereafter, CC2D2A mutations were reported in JBS also. The analysis of the CC2D2A gene in our series of MKS fetuses, identified 14 novel truncating mutations in 11 cases. These results confirm the involvement of CC2D2A in MKS and reveal a major contribution of CC2D2A to the disease. We also identified three missense CC2D2A mutations in two JBS cases. Therefore and in accordance with the data reported regarding RPGRIP1L, our results indicate phenotype-genotype correlations, as missense and presumably hypomorphic mutations lead to JBS while all null alleles lead to MKS. PMID:19777577

  18. 48 CFR Appendixes A-C to Chapter 7 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false A Appendixes A-C to Chapter 7 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT Appendixes A-C to Chapter 7...

  19. 48 CFR Appendixes A-C to Chapter 7 - [Reserved

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false A Appendixes A-C to Chapter 7 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT Appendixes A-C to Chapter 7...

  20. AC losses in a HTS coil carrying DC current in AC external magnetic field

    NASA Astrophysics Data System (ADS)

    Ogawa, J.; Zushi, Y.; Fukushima, M.; Tsukamoto, O.; Suzuki, E.; Hirakawa, M.; Kikukawa, K.

    2003-10-01

    We electrically measured AC losses in a Bi2223/Ag-sheathed pancake coil excited by a DC current in AC external magnetic field. Losses in the coil contain two kinds of loss components that are the magnetization losses and dynamic resistance losses. In the measurement, current leads to supply a current to the coil were specially arranged to suppress electromagnetic coupling between the coil current and the AC external magnetic field. A double pick-up coils method was used to suppress a large inductive voltage component contained in voltage signal for measuring the magnetization losses. It was observed that the magnetization losses were dependent on the coil current and that a peak of a curve of the loss factor vs. amplitude of the AC external magnetic field shifted to lower amplitude of the AC magnetic field as the coil current increased. This result suggests the full penetration magnetic field of the coil tape decreases as the coil current increases. The dynamic resistance losses were measured by measuring a DC voltage appearing between the coil terminals. It was observed that the DC voltage appearing in the coil subject to the AC external magnetic field was much larger than that in the coil subject to DC magnetic field.

  1. Evaluation of modern IGBT-modules for hard-switched AC/DC/AC converters

    SciTech Connect

    Blaabjerg, F.; Pedersen, J.K.; Jaeger, U.

    1995-12-31

    The development of IGBT devices is still producing faster devices with lower losses. The applications become more advanced like a complete hard-switched AC/DC/AC converter with almost clean input current and regenerating capabilities. This paper will first focus on a detailed characterization and comparison of eight different IGBT-modules representing state-of-the-art for both PT and NPT technologies. The voltage level of the devices is 1,200V and 1,600V/1,700V. The characterization is done on an advanced measurement system which is briefly described. The characterization is based on static and dynamic tests for both IGBT and the diodes in the IGBT-modules at a junction temperature at 125 C. The comparison is first done directly based on conduction losses and switching losses, and later the measurements are used in a loss model for a complete AC/DC/AC converter application. In the AC/DC/AC converter the power losses are modelled, and different operating conditions are compared like different voltage levels in the DC-link. It is concluded dependent on operation conditions different devices will be preferable, but the high voltage devices have the highest losses even at a high operating voltage.

  2. Achieving joint benefits from joint implementation

    SciTech Connect

    Moomaw, W.R.

    1995-11-01

    Joint Implementation (JI) appears to have been born with Applied Energy Services Guatemala project in 1988. That project, to plant 52 million trees, protect existing forests from cutting and fire, and enhance rural development, is being implemented by CARE Guatemala to offset 120 per cent of the emissions of a small coal burning power plant that has been built in Connecticut. Since that time, several utilities and governments have initiated additional projects. Not all of these necessarily consist of tree planting in other countries, but may consist of energy efficiency or energy conservation programs designed to reduce carbon emissions by at least as much as the additional releases from a new facility. All JI projects share the characteristic of linking the release of greenhouse gases in an industrial country with an offset that reduces or absorbs a comparable amount in another country. The emitter in the industrial country is willing to pay for the reduction elsewhere because costs are less than they would be at home.

  3. Formation of tough composite joints

    SciTech Connect

    Brun, M.K.

    1997-05-01

    Joints which exhibit tough fracture behavior were formed in a composite with a Si/SiC matrix reinforced with Textron SCS-6 fibers with either boron nitride or silicon nitride fiber coatings. In composites with BN coatings fibers were aligned uniaxially, while composites with Si{sub 3}N{sub 4}-coated fibers had a 0/90{degree} architecture. Lapped joints (joints with overlapping fingers) were necessary to obtain tough behavior. Geometrical requirements necessary to avoid brittle joint failure have been proposed. Joints with a simple overlap geometry (only a few fingers) would have to be very long in order to prevent brittle failure. Typical failure in these joints is caused by a crack propagating along the interfaces between the joint fingers. Joints of the same overall length, but with geometry changed to be symmetric about the joint centerline and with an extra shear surface exhibited tough fractures accompanied with extensive fiber pullout. The initial matrix cracking of these joints was relatively low because cracks propagated easily through the ends of the fingers. Joints with an optimized stepped sawtooth geometry produced composite-like failures with the stress/strain curves containing an elastic region followed by a region of rising stress with an increase of strain. Increasing the fiber/matrix interfacial strength from 9 to 25 MPa, by changing the fiber coating, increased matrix cracking and ultimate strength of the composite significantly. The best joints had matrix cracking stress and ultimate strength of 138 and 240 MPa, respectively. Joint failure was preceded by multiple matrix cracking in the entire composite. The high strength of the joints will permit building of structures containing joints with only a minor reduction of design stresses.

  4. Epilepsy, Seizures, and Inflammation: Role of the C-C Motif Ligand 2 Chemokine.

    PubMed

    Bozzi, Yuri; Caleo, Matteo

    2016-06-01

    Epilepsy is a chronic disorder characterized by spontaneous recurrent seizures. Several lines of evidence demonstrate that inflammatory processes within the brain parenchyma contribute to recurrence and precipitation of seizures. In both epileptic patients and animal models, seizures upregulate inflammatory mediators, which in turn may enhance brain excitability. We recently showed that the C-C motif ligand 2 (CCL2) chemokine (also known as monocyte chemoattractant protein-1 [MCP-1]) mediates the seizure-promoting effects of inflammation. Systemic inflammatory challenge in chronically epileptic mice markedly enhanced seizure frequency and upregulated CCL2 expression in the brain. Selective pharmacological blockade of CCL2 synthesis or C-C chemokine receptor type 2 (CCR2) significantly suppressed inflammation-induced seizures. These results have important implications for the development of novel anticonvulsant therapies: drugs interfering with CCL2 signaling are used clinically for several human disorders and might be redirected for use in pharmacoresistant epilepsy. Here we review the role of CCL2/CCR2 signaling in linking systemic inflammation with seizure susceptibility and discuss some open questions that arise from our recent studies.

  5. ASASSN-14cc: A likely helium analog of RZ Leonis Minoris

    NASA Astrophysics Data System (ADS)

    Kato, Taichi; Hambsch, Franz-Josef; Monard, Berto

    2015-04-01

    We identified that ASASSN-14cc is a very active dwarf nova spending approximately 60% of the time in outburst. Our long-term photometry revealed that the object shows long outbursts recurring with a period of 21-33 d and very brief short outbursts lasting less than 1 d. The maximum fading rate exceeds 2.8 mag d-1. The duration of the long outbursts is 9-18 d, comprising 50%-60% of the recurrence time of long outbursts. We detected 0.01560-0.01562 d (22.5 min) modulations during long outbursts, which we identified as superhumps. These features indicate that ASASSN-14cc has outburst parameters very similar to the extremely unusual dwarf nova RZ LMi but with a much shorter superhump period. All the observations can be naturally understood, considering that this object is a helium analog (AM CVn-type object) of RZ LMi. The highest outburst activity among AM CVn-type objects can be understood as the high-mass transfer rate expected for the orbital period giving a condition close to the stability limit of the accretion disk. In contrast to RZ LMi, this object shows little evidence for premature quenching of the superoutburst, which has been proposed to explain the unusual outburst parameters in RZ LMi.

  6. Emission line tomography of the short period cataclysmic variables CC Scl and V2051 Oph

    NASA Astrophysics Data System (ADS)

    Longa-Peña, P.; Steeghs, D.; Marsh, T.

    2015-02-01

    We present time series spectroscopy of two short period cataclysmic variables, CC Scl and V2051 Oph, to test the efficiency of Doppler-tomography-based methods in constraining orbital parameters of evolved cataclysmic variables. We find that the Ca II triplet lines offer superior diagnostics, revealing emission components from the mass donors and sharp images of the accretion discs. Furthermore, we use Monte Carlo methods to estimate the uncertainties from ensembles of Doppler maps. We compare our new methods against traditional radial velocity methods and show that they offer a valid route towards system parameter determination. Our analysis of CC Scl suggests a low mass ratio of q = 0.08 ± 0.03 with a primary velocity of K1 = 37 ± 14 km s-1. This mass ratio is in between the pre- and post-period minimum status, however our K1 solution favours a post-period minimum system. Our derived parameters for V2051 Oph (q = 0.18 ± 0.05, K1 = 97 ± 10 km s-1) are in agreement with the eclipse solution (q = 0.19 ± 0.03), offering a direct validation of our methods.

  7. Neolignans from the Arils of Myristica fragrans as Potent Antagonists of CC Chemokine Receptor 3.

    PubMed

    Morikawa, Toshio; Hachiman, Ikuko; Matsuo, Kazuhiko; Nishida, Eriko; Ninomiya, Kiyofumi; Hayakawa, Takao; Yoshie, Osamu; Muraoka, Osamu; Nakayama, Takashi

    2016-08-26

    CC chemokine receptor 3 (CCR3) is expressed selectively in eosinophils, basophils, and some Th2 cells and plays a major role in allergic diseases. A methanol extract from the arils of Myristica fragrans inhibited CC chemokine ligand 11-induced chemotaxis in CCR3-expressing L1.2 cells at 100 μg/mL. From this extract, eight new neolignans, maceneolignans A-H (1-8), were isolated, and their stereostructures were elucidated from their spectroscopic values and chemical properties. Of those constituents, compounds 1, 4, 6, and 8 and (+)-erythro-(7S,8R)-Δ(8')-7-hydroxy-3,4-methylenedioxy-3',5'-dimethoxy-8-O-4'-neolignan (11), (-)-(8R)-Δ(8')-3,4-methylenedioxy-3',5'-dimethoxy-8-O-4'-neolignan (17), (+)-licarin A (20), nectandrin B (25), verrucosin (26), and myristicin (27) inhibited CCR3-mediated chemotaxis at a concentration of 1 μM. Among them, 1 (EC50 1.6 μM), 6 (1.5 μM), and 8 (1.4 μM) showed relatively strong activities, which were comparable to that of a synthetic CCR3 selective antagonist, SB328437 (0.78 μM).

  8. Energy Materials Coordinating Committee (EMaCC), fiscal year 1985. Annual technical report

    SciTech Connect

    1986-05-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meeting/workshops on selected topics involving both DOE and major contractors. Four topical subcommittees on Structural Ceramics, Batteries and Fuel Cells, Radioactive Waste Containment, and Steel are established and are continuing their own program. The FY 1985 and FY 1986 meeting program is given. The EMaCC aids in obtaining materials-related inputs for both intra- and inter-agency compilations. Brief summaries of the materials research programs associated with each office and division are presented, including tables listing individual projects and the FY 1985 budgets for each. More details on the individual projects within the divisions and the specific tasks or subcontracts within the various projects are given in the paragraph descriptions.

  9. Cloning and expression analysis of three novel CC chemokine genes from Japanese flounder (Paralichthys olivaceus).

    PubMed

    Zou, Gang-gang; Nozaki, Reiko; Kondo, Hidehiro; Hirono, Ikuo

    2014-10-01

    Chemokines are small cytokines secreted by various cell types. They not only function in cell activation, differentiation and trafficking, but they also have influences on many biological processes. In this study, three novel CC chemokine genes Paol-SCYA105, 106 and 107 in Japanese flounder (Paralichthys olivaceus) were cloned and characterized. Paol-SCYA105 was mainly detected in gill, kidney and spleen, Paol-SCYA106 was detected in all tissues examined and Paol-SCYA107 was mainly detected in the spleen and kidney. Paol-SCYA105 and Paol-SCYA106 gene expressions peaked in kidney at day 3 after viral hemorrhagic septicemia virus infection and decreased at day 6, but Paol-SCYA106 still remained at a high level at day 6. Paol-SCYA107 gene expression was significantly up-regulated in kidney at day 6 after viral hemorrhagic septicemia virus infection. In response to infection by Gram-negative Edwardsiella tarda and Gram-positive Streptococcus iniae in kidney, only Paol-SCYA106 gene expression significantly increased. Together, these results indicate that these three novel CC chemokines are involved in the immune response against pathogen infections.

  10. Time resolved QCLAS measurements in pulsed cc-rf CF4/H2 plasmas

    NASA Astrophysics Data System (ADS)

    Stepanov, S.; Welzel, S.; Röpcke, J.; Meichsner, J.

    2009-03-01

    Fluorocarbon containing capacitively coupled radio frequency (cc-rf) plasmas are widely used in technical applications and as model systems for fundamental investigations of complex plasmas. Absorption spectroscopy based on pulsed quantum cascade lasers (QCL) was applied in the mid-IR spectral range of 1269-1275 cm-1. Absolute densities of the precursor molecule CF4 and of the stable product C3F8 were measured with a time resolution of up to 1 ms in pulsed CF4/H2 asymmetrical cc-rf (13.56 MHz) discharges. For this purpose both the non-negligible temperature dependence of the absorption coefficients and the interference of the absorption features of CF4 and C3F8 had to be taken into account in the target spectral range. Therefore, at two different spectral positions composite absorption spectra were acquired under the same plasma conditions in order to discriminate between CF4 and C3F8 contributions. A total consumption of~ 12 % was observed for CF4 during a 1 s plasma pulse, whereas C3F8 appeared to be produced mainly from amorphous fluorocarbon layers deposited at the reactor walls. A gas temperature increase by ~ 100 K in the plasma pulse was estimated from the measurements. Additionally, not yet identified unresolved absorption (potentially from the excited CF4 molecule) was found during the àon-phase'.

  11. [The role of CC-chemokine ligand 2 in the development of psychic dependence on methamphetamine].

    PubMed

    Saika, Fumihiro; Kiguchi, Norikazu; Kishioka, Shiroh

    2015-10-01

    Addiction is described as a chronic neurological disorder associated with plasticity in the mesolimbic system. Recently, it has been suggested that neuroinflammation plays an important role in the induction of neuronal plasticity and the formation of pathogenesis in chronic neurological disorders. Therefore, we examined the role of CC-chemokine ligand 2 (CCL2), a proinflammatory chemokine, in the development of psychic dependence on methamphetamine. In mice treated with methamphetamine, CCL2 mRNA was significantly increased in prefrontal cortex and nucleus accumbens. Moreover, phosphorylated tyrosine hydroxylase serine40 (pTH Ser40) levels in the ventral tegmental area (VTA) were increased by methamphetamine. Similarly, pTH Ser40 levels in the VTA were also increased by the intracerebroventricular administration of recombinant CCL2. The increment of pTH Ser40 levels in the VTA by methamphetamine was attenuated by RS504393, a selective CC-chemokine receptor 2 (CCR2) antagonist, indicating that the increased CCL2 activates the brain reward system via CCR2 activation. In the conditioned place preference test, methamphetamine produced place preference in a dose-dependent manner, which was attenuated by RS504393. These results suggest that the activation of the brain reward system via CCL2-CCR2 pathway plays an important role in the development of psychic dependence on methamphetamine.

  12. Abrogation of CC chemokine receptor 9 ameliorates ventricular remodeling in mice after myocardial infarction

    PubMed Central

    Huang, Yan; Wang, Dandan; Wang, Xin; Zhang, Yijie; Liu, Tao; Chen, Yuting; Tang, Yanhong; Wang, Teng; Hu, Dan; Huang, Congxin

    2016-01-01

    CC chemokine receptor 9 (CCR9), which is a unique receptor for CC chemokine ligand (CCL25), is mainly expressed on lymphocytes, dendritic cells (DCs) and monocytes/macrophages. CCR9 mediates the chemotaxis of inflammatory cells and participates in the pathological progression of inflammatory diseases. However, the role of CCR9 in the pathological process of myocardial infarction (MI) remains unexplored; inflammation plays a key role in this process. Here, we used CCR9 knockout mice to determine the functional significance of CCR9 in regulating post-MI cardiac remodeling and its underlying mechanism. MI was induced by surgical ligation of the left anterior descending coronary artery in CCR9 knockout mice and their CCR9+/+ littermates. Our results showed that the CCR9 expression levels were up-regulated in the hearts of the MI mice. Abrogation of CCR9 improved the post-MI survival rate and left ventricular (LV) dysfunction and decreased the infarct size. In addition, the CCR9 knockout mice exhibited attenuated inflammation, apoptosis, structural and electrical remodeling compared with the CCR9+/+ MI mice. Mechanistically, CCR9 mainly regulated the pathological response by interfering with the NF-κB and MAPK signaling pathways. In conclusion, the data reveal that CCR9 serves as a novel modulator of pathological progression following MI through NF-κB and MAPK signaling. PMID:27585634

  13. 78 FR 14620 - Joint Development: Proposed Circular

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-06

    ... Federal Transit Administration Joint Development: Proposed Circular AGENCY: Federal Transit Administration... the form of a circular, on joint development. This circular provides guidance to recipients of Federal... joint development. This circular: (1) Defines the term ``joint development''; ] (2) explains how...

  14. 49 CFR 213.121 - Rail joints.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for... accommodate expansion and contraction due to temperature variations. When no-slip, joint-to-rail...

  15. 49 CFR 213.121 - Rail joints.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for... accommodate expansion and contraction due to temperature variations. When no-slip, joint-to-rail...

  16. 49 CFR 213.121 - Rail joints.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for... accommodate expansion and contraction due to temperature variations. When no-slip, joint-to-rail...

  17. ISAKOS upper extremity committee consensus statement on the need for diversification of the Rockwood classification for acromioclavicular joint injuries.

    PubMed

    Beitzel, Knut; Mazzocca, Augustus D; Bak, Klaus; Itoi, Eiji; Kibler, William B; Mirzayan, Raffy; Imhoff, Andreas B; Calvo, Emilio; Arce, Guillermo; Shea, Kevin

    2014-02-01

    Optimal treatment for the unstable acromioclavicular (AC) joint remains a highly debated topic in the field of orthopaedic medicine. In particular, no consensus exists regarding treatment of grade III injuries, which are classified according to the Rockwood classification by disruption of both the coracoclavicular and AC ligaments. The ISAKOS Upper Extremity Committee has provided a more specific classification of shoulder pathologies to enhance the knowledge on and clinical approach to these injuries. We suggest the addition of grade IIIA and grade IIIB injuries to a modified Rockwood classification. Grade IIIA injuries would be defined by a stable AC joint without overriding of the clavicle on the cross-body adduction view and without significant scapular dysfunction. The unstable grade IIIB injury would be further defined by therapy-resistant scapular dysfunction and an overriding clavicle on the cross-body adduction view.

  18. Joint Services Electronics Program.

    DTIC Science & Technology

    1985-12-31

    collisional decay rate expected on the basis of traditional collision-broadening- type experiments. Our experiment, per- formed in a well understood...with respect to) the observations. An unexpected outcome of this line inquiry is a new. and rat her compelling, argument for the use of edge information...Report No. 99 I_3A 0 __. _______$_A _______ 4. TITLE (,.e Subtitle) 5. TYPE OF REPORT & PERIOD COVC.ZD JOINT SERVICES ELECTRONICS PROGRAM Annual

  19. Optimized bolted joint

    NASA Technical Reports Server (NTRS)

    Hart-Smith, L. J.; Bunin, B. L.; Watts, D. J. (Inventor)

    1986-01-01

    A method is disclosed for joining segments of the skin of an aircraft. The ends of the skin are positioned in close proximity or abutt each other. The skin is of constant thickness throughout the joint and is sandwiched between splice plates, which taper in thickness from the last to the first bolt rows in order to reduce the stiffness of the splice plate and thereby reduce the load transfer at the location where bypass loads are the highest.

  20. Australias Joint Approach

    DTIC Science & Technology

    2015-09-01

    School of Signals, Defence Force School of Music , Defence Intelligence Training Centre, Defence Police Training Centre and Army School of Health...been published including planning, joint exercises and training, maritime operations, intelligence and electronic warfare. The 1981 version of JSP (AS...in the white paper published in the same year. DCP 2009 also promised to provide an electronic update every six months, with a particular focus on

  1. Joint Services Electronics Program.

    DTIC Science & Technology

    1983-09-30

    AeSTRACT ( Coat nu an rever s e f n cessry and Identify by block number) , An annual report of the JSEP (Joint Services Electronics Program) in Electro...solid state electals in the following areas: (1) Use of silicides and regrown silicon as materials for interconnects, gate electrodes, and/or active...the gate " electrode and for the interconnect between devices. Recent work in our laboratory has shown that silicides and regrown silicon are very

  2. Distal Radioulnar Joint Instability

    PubMed Central

    Mirghasemi, Ali R.; Lee, Daniel J.; Rahimi, Narges; Rashidinia, Shervin

    2015-01-01

    Distal radioulnar joint (DRUJ) instability is a common clinical condition but a frequently missed diagnosis. Both surgical and nonsurgical treatments are possible for chronic cases of DRUJ instability. Nonsurgical treatment can be considered as the primary therapy in less active patients, while surgery should be considered to recover bone and ligament injuries if nonsurgical treatment fails to restore forearm stability and function. The appropriate choice of treatment depends on the individual patient and specific derangement of the DRUJ PMID:26328241

  3. Joint Forces Capabilities

    DTIC Science & Technology

    2007-11-02

    for countering the proliferation of weapons of mass destruction (WMD) in space. The Space Operations Center ( SPOC ), USSPACECOM is the single point...of contact for assessing space capabilities. Combatant commanders, subordinate JFCs, and Services can access this information from the SPOC via the...special operations forces SPOC Space Operations Center SSBN fleet ballistic missile submarine SST space support team UJTL Universal Joint Task List UN

  4. Prosthetic elbow joint

    NASA Technical Reports Server (NTRS)

    Weddendorf, Bruce C. (Inventor)

    1994-01-01

    An artificial, manually positionable elbow joint for use in an upper extremity, above-elbow, prosthetic is described. The prosthesis provides a locking feature that is easily controlled by the wearer. The instant elbow joint is very strong and durable enough to withstand the repeated heavy loadings encountered by a wearer who works in an industrial, construction, farming, or similar environment. The elbow joint of the present invention comprises a turntable, a frame, a forearm, and a locking assembly. The frame generally includes a housing for the locking assembly and two protruding ears. The forearm includes an elongated beam having a cup-shaped cylindrical member at one end and a locking wheel having a plurality of holes along a circular arc on its other end with a central bore for pivotal attachment to the protruding ears of the frame. The locking assembly includes a collar having a central opening with a plurality of internal grooves, a plurality of internal cam members each having a chamfered surface at one end and a V-shaped slot at its other end; an elongated locking pin having a crown wheel with cam surfaces and locking lugs secured thereto; two coiled compression springs; and a flexible filament attached to one end of the elongated locking pin and extending from the locking assembly for extending and retracting the locking pin into the holes in the locking wheel to permit selective adjustment of the forearm relative to the frame. In use, the turntable is affixed to the upper arm part of the prosthetic in the conventional manner, and the cup-shaped cylindrical member on one end of the forearm is affixed to the forearm piece of the prosthetic in the conventional manner. The elbow joint is easily adjusted and locked between maximum flex and extended positions.

  5. Joint Services Electronics Program.

    DTIC Science & Technology

    1985-12-31

    Director Joint Services Electronics Program E.L . T*.. I * cumnent has been app- lvad JAN 141986;- f -I p-bli- ’ l.-tse and sale; it: di~ributionl is...fluctuations cause localized layers of varying composition that resulted in large PL line widths and apparently random PL emission wavelength. The presence of...vent and * growth lines . Steps are being taken to eliminate these imbalances. Studies of diffusion induced disordering of superlattices has been

  6. 7 CFR 1737.31 - Area Coverage Survey (ACS).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 11 2012-01-01 2012-01-01 false Area Coverage Survey (ACS). 1737.31 Section 1737.31... Studies-Area Coverage Survey and Loan Design § 1737.31 Area Coverage Survey (ACS). (a) The Area Coverage Survey (ACS) is a market forecast of service requirements of subscribers in a proposed service area....

  7. 7 CFR 1737.31 - Area Coverage Survey (ACS).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Area Coverage Survey (ACS). 1737.31 Section 1737.31... Studies-Area Coverage Survey and Loan Design § 1737.31 Area Coverage Survey (ACS). (a) The Area Coverage Survey (ACS) is a market forecast of service requirements of subscribers in a proposed service area....

  8. 7 CFR 1737.31 - Area Coverage Survey (ACS).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 11 2013-01-01 2013-01-01 false Area Coverage Survey (ACS). 1737.31 Section 1737.31... Studies-Area Coverage Survey and Loan Design § 1737.31 Area Coverage Survey (ACS). (a) The Area Coverage Survey (ACS) is a market forecast of service requirements of subscribers in a proposed service area....

  9. 7 CFR 1737.31 - Area Coverage Survey (ACS).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 11 2011-01-01 2011-01-01 false Area Coverage Survey (ACS). 1737.31 Section 1737.31... Studies-Area Coverage Survey and Loan Design § 1737.31 Area Coverage Survey (ACS). (a) The Area Coverage Survey (ACS) is a market forecast of service requirements of subscribers in a proposed service area....

  10. 21 CFR 880.5500 - AC-powered patient lift.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false AC-powered patient lift. 880.5500 Section 880.5500 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Devices § 880.5500 AC-powered patient lift. (a) Identification. An AC-powered lift is an...

  11. Methods for Addressing Missing Data with Applications from ACS Exams

    ERIC Educational Resources Information Center

    Brandriet, Alexandra; Holme, Thomas

    2015-01-01

    As part of the ACS Examinations Institute (ACS-EI) national norming process, student performance data sets are collected from professors at colleges and universities from around the United States. Because the data sets are collected on a volunteer basis, the ACS-EI often receives data sets with only students' total scores and without the students'…

  12. Measuring Hole Elongation in Bolted Joints

    NASA Technical Reports Server (NTRS)

    Wichorek, G. R.

    1986-01-01

    Measurement does not affect joint parameters. Verification of analytical and strength-prediction methods for bolted composite joints based generally on data obtained experimentally from double-lap-joint specimens. In mechanically fastened joints, stresses maximal at fastener holes. Ability to measure accurately hole elongations without affecting joint parameters provides better understanding of elastic and plastic behavior of joint material leading to failure mechanisms in mechanically fastened joints required for design of more-efficient, lightweight composite joints.

  13. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Rail joints. 213.351 Section 213.351... Rail joints. (a) Each rail joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for the rail on which it is applied. (b) If a joint bar is cracked,...

  14. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  15. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 17 Commodity and Securities Exchanges 4 2014-04-01 2014-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  16. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Rail joints. 213.351 Section 213.351... Rail joints. (a) Each rail joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for the rail on which it is applied. (b) If a joint bar is cracked,...

  17. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 3 2013-04-01 2013-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  18. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 17 Commodity and Securities Exchanges 3 2012-04-01 2012-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  19. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 17 Commodity and Securities Exchanges 3 2011-04-01 2011-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  20. Molecular characterization, functional analysis, and defense mechanisms of two CC chemokines in Nile tilapia (Oreochromis niloticus) in response to severely pathogenic bacteria.

    PubMed

    Nakharuthai, Chatsirin; Areechon, Nontawith; Srisapoome, Prapansak

    2016-06-01

    Two full-length cDNAs encoding CC chemokine genes in Nile tilapia (Oreochromis niloticus) (On-CC1 and On-CC2) were cloned and characterized. On-CC1 and On-CC2 showed signature cysteine motifs consisting of four cysteines. The expression levels of On-CC1 and On-CC2 were analyzed by RT-PCR, which showed that low expression of these two genes was only observed in the peripheral blood leukocytes (PBLs) and spleen of normal fish. Expression levels of these two molecules were quantified in 13 tissues of fish infected with virulent strains of Streptococcus agalactiae and Flavobacterium columnare. Most tissues, especially PBLs, the spleen and the liver, expressed significantly higher mRNA levels than the controls, particularly at 12 and 24 h after infection (P < 0.05). The current study strongly indicates that CC chemokine genes in Nile tilapia are crucially involved in the early immune responses to pathogens. Functional analyses clearly demonstrated that 10 and 100 μg/ml of recombinant rOn-CC1 and rOn-CC2 proteins efficiently enhanced the phagocytic activity (in vitro) of Nile tilapia phagocytes. Finally, Southern blot analysis and searching in Ensembl databases demonstrated that two different functional CC chemokine genes and other pseudogene fragments were discovered in the Nile tilapia genome.

  1. Effect of irradiation dose on mechanical properties and fracture character of Cu//SS joints for ITER

    NASA Astrophysics Data System (ADS)

    Pokrovsky, A. S.; Fabritsiev, S. A.; Peacock, A.; Gerwash, A.; Barabash, V. R.

    2007-08-01

    Cu//SS type joints are essential for the heat-sink systems of the ITER high-heat flux components. A number of technologies have been proposed for the production of such bimetallic structures, including brazing, friction welding, HIP and cast-copper-to-steel. In this paper, the authors present the results of investigations into the irradiation resistance of GlidCopAl25//316L(N) and CuCrZr//316L(N)-type joints produced by the HIP and cast-copper-to-steel (CC) technologies. Specimens of the joints were irradiated in the RBT-6 reactor in the dose range of 10 -3-10 -1 dpa at Tirr = 150 °C. Irradiation causes strengthening of the joint specimens and the uniform elongation drops from 7% in the initial state to 1-2%. However, the total elongation remains at the relatively high level of ˜10%. The investigations performed make it possible to recommend joints of CuCrZr//316L(N) (CC) and CuCrZr//316L(N) (HIP) type produced by the cast-copper-to-steel and HIP technologies, respectively, for ITER applications.

  2. Colibactin Contributes to the Hypervirulence of pks+ K1 CC23 Klebsiella pneumoniae in Mouse Meningitis Infections

    PubMed Central

    Lu, Min-Chi; Chen, Ying-Tsong; Chiang, Ming-Ko; Wang, Yao-Chen; Hsiao, Pei-Yi; Huang, Yi-Jhen; Lin, Ching-Ting; Cheng, Ching-Chang; Liang, Chih-Lung; Lai, Yi-Chyi

    2017-01-01

    Klebsiella pneumoniae is the most common pathogen of community-acquired meningitis in Taiwan. However, the lack of a physiologically relevant meningitis model for K. pneumoniae has impeded research into its pathogenesis mechanism. Based on the core genome MLST analyses, the hypervirulent K1 K. pneumoniae strains, which are etiologically implicated in adult meningitis, mostly belong to a single clonal complex, CC23. Some K1 CC23 K. pneumoniae strains carry a gene cluster responsible for colibactin production. Colibactin is a small genotoxic molecule biosynthesized by an NRPS-PKS complex, which is encoded by genes located on the pks island. Compared to other hypervirulent K. pneumoniae which primarily infect the liver, the colibactin-producing (pks+) K1 CC23 strains had significant tropism toward the brain of BALB/c mice. We aimed in this study to develop a physiologically relevant meningitis model with the use of pks+ K1 CC23 K. pneumoniae. Acute meningitis was successfully induced in adult BALB/c male mice through orogastric, intranasal, and intravenous inoculation of pks+ K1 CC23 K. pneumoniae. Besides the typical symptoms of bacterial meningitis, severe DNA damages, and caspase 3-independent cell death were elicited by the colibactin-producing K1 CC23 K. pneumoniae strain. The deletion of clbA, which abolished the production of colibactin, substantially hindered K. pneumoniae hypervirulence in the key pathogenic steps toward the development of meningitis. Our findings collectively demonstrated that colibactin was necessary but not sufficient for the meningeal tropism of pks+ K1 CC23 K. pneumoniae, and the mouse model established in this study can be applied to identify other virulence factors participating in the development of this life-threatening disease.

  3. Combining active-space coupled-cluster methods with moment energy corrections via the CC(P;Q) methodology, with benchmark calculations for biradical transition states

    NASA Astrophysics Data System (ADS)

    Shen, Jun; Piecuch, Piotr

    2012-04-01

    We have recently suggested the CC(P;Q) methodology that can correct energies obtained in the active-space coupled-cluster (CC) or equation-of-motion (EOM) CC calculations, which recover much of the nondynamical and some dynamical electron correlation effects, for the higher-order, mostly dynamical, correlations missing in the active-space CC/EOMCC considerations. It is shown that one can greatly improve the description of biradical transition states, both in terms of the resulting energy barriers and total energies, by combining the CC approach with singles, doubles, and active-space triples, termed CCSDt, with the CC(P;Q)-style correction due to missing triple excitations defining the CC(t;3) approximation.

  4. Combining active-space coupled-cluster methods with moment energy corrections via the CC(P;Q) methodology, with benchmark calculations for biradical transition states.

    PubMed

    Shen, Jun; Piecuch, Piotr

    2012-04-14

    We have recently suggested the CC(P;Q) methodology that can correct energies obtained in the active-space coupled-cluster (CC) or equation-of-motion (EOM) CC calculations, which recover much of the nondynamical and some dynamical electron correlation effects, for the higher-order, mostly dynamical, correlations missing in the active-space CC/EOMCC considerations. It is shown that one can greatly improve the description of biradical transition states, both in terms of the resulting energy barriers and total energies, by combining the CC approach with singles, doubles, and active-space triples, termed CCSDt, with the CC(P;Q)-style correction due to missing triple excitations defining the CC(t;3) approximation.

  5. Large aperture ac interferometer for optical testing.

    PubMed

    Moore, D T; Murray, R; Neves, F B

    1978-12-15

    A 20-cm clear aperture modified Twyman-Green interferometer is described. The system measures phase with an AC technique called phase-lock interferometry while scanning the aperture with a dual galvanometer scanning system. Position information and phase are stored in a minicomputer with disk storage. This information is manipulated with associated software, and the wavefront deformation due to a test component is graphically displayed in perspective and contour on a CRT terminal.

  6. YBCO Coated Conductors with Reduced AC Losses

    DTIC Science & Technology

    2008-01-30

    application such as turbo- generators and gyrotron magnets . The major reason is the enhanced in-field performance at 50-65 K and the proven...transformers, current limiters and the stators of rotating equipment. Low AC-loss in 2G HTS requires wire components with low magnetism , and an YBCO...layer with low transport and low hysteretic losses in an alternating magnetic field. The latter loss type requires a suitable filamentization technique

  7. AC plasma anemometer—characteristics and design

    NASA Astrophysics Data System (ADS)

    Marshall, Curtis; Matlis, Eric; Corke, Thomas; Gogineni, Sivaram

    2015-08-01

    The characteristics and design of a high-bandwidth flow sensor that uses an AC glow discharge (plasma) as the sensing element is presented. The plasma forms in the air gap between two protruding low profile electrodes attached to a probe body. The output from the anemometer is an amplitude modulated version of the AC voltage input that contains information about the mean and fluctuating velocity components. The anemometer circuitry includes resistance and capacitance elements that simulate a dielectric-barrier to maintain a diffuse plasma, and a constant-current feedback control that maintains operation within the desired glow discharge regime over an extended range of air velocities. Mean velocity calibrations are demonstrated over a range from 0 to 140 m s-1. Over this velocity range, the mean output voltage varied linearly with air velocity, providing a constant static sensitivity. The effect of the electrode gap and input AC carrier frequency on the anemometer static sensitivity and dynamic response are investigated. Experiments are performed to compare measurements obtained with a plasma sensor operating at two AC carrier frequencies against that of a constant-temperature hot-wire. All three sensors were calibrated against the same known velocity reference. An uncertainty based on the standard deviation of the velocity calibration fit was applied to the mean and fluctuating velocity measurements of the three sensors. The motivation is not to replace hot-wires as a general measurement tool, but rather as an alternative to hot-wires in harsh environments or at high Mach numbers where they either have difficulty in surviving or lack the necessary frequency response.

  8. THE ACS NEARBY GALAXY SURVEY TREASURY

    SciTech Connect

    Dalcanton, Julianne J.; Williams, Benjamin F.; Rosema, Keith; Gogarten, Stephanie M.; Christensen, Charlotte; Gilbert, Karoline; Hodge, Paul; Seth, Anil C.; Dolphin, Andrew; Holtzman, Jon; Skillman, Evan D.; Weisz, Daniel; Cole, Andrew; Girardi, Leo; Karachentsev, Igor D.; Olsen, Knut; Freeman, Ken; Gallart, Carme; De Jong, Roelof S. E-mail: ben@astro.washington.edu E-mail: stephanie@astro.washington.edu E-mail: fabio@astro.washington.edu E-mail: aseth@cfa.harvard.edu

    2009-07-15

    The ACS Nearby Galaxy Survey Treasury (ANGST) is a systematic survey to establish a legacy of uniform multi-color photometry of resolved stars for a volume-limited sample of nearby galaxies (D < 4 Mpc). The survey volume encompasses 69 galaxies in diverse environments, including close pairs, small and large groups, filaments, and truly isolated regions. The galaxies include a nearly complete range of morphological types spanning a factor of {approx}10{sup 4} in luminosity and star formation rate. The survey data consist of images taken with the Advanced Camera for Surveys (ACS) on the Hubble Space Telescope (HST), supplemented with archival data and new Wide Field Planetary Camera 2 (WFPC2) imaging taken after the failure of ACS. Survey images include wide field tilings covering the full radial extent of each galaxy, and single deep pointings in uncrowded regions of the most massive galaxies in the volume. The new wide field imaging in ANGST reaches median 50% completenesses of m {sub F475W} = 28.0 mag, m {sub F606W} = 27.3 mag, and m {sub F814W} = 27.3 mag, several magnitudes below the tip of the red giant branch (TRGB). The deep fields reach magnitudes sufficient to fully resolve the structure in the red clump. The resulting photometric catalogs are publicly accessible and contain over 34 million photometric measurements of >14 million stars. In this paper we present the details of the sample selection, imaging, data reduction, and the resulting photometric catalogs, along with an analysis of the photometric uncertainties (systematic and random), for both ACS and WFPC2 imaging. We also present uniformly derived relative distances measured from the apparent magnitude of the TRGB.

  9. Graphs for Isotopes of 89-Ac (Actinium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides a graphic representation of nucleon separation energies and residual interaction parameters for isotopes of the chemical element 89-Ac (Actinium, atomic number Z = 89).

  10. The ACS Nearby Galaxy Survey Treasury

    NASA Astrophysics Data System (ADS)

    Dalcanton, Julianne J.; Williams, Benjamin F.; Seth, Anil C.; Dolphin, Andrew; Holtzman, Jon; Rosema, Keith; Skillman, Evan D.; Cole, Andrew; Girardi, Léo; Gogarten, Stephanie M.; Karachentsev, Igor D.; Olsen, Knut; Weisz, Daniel; Christensen, Charlotte; Freeman, Ken; Gilbert, Karoline; Gallart, Carme; Harris, Jason; Hodge, Paul; de Jong, Roelof S.; Karachentseva, Valentina; Mateo, Mario; Stetson, Peter B.; Tavarez, Maritza; Zaritsky, Dennis; Governato, Fabio; Quinn, Thomas

    2009-07-01

    The ACS Nearby Galaxy Survey Treasury (ANGST) is a systematic survey to establish a legacy of uniform multi-color photometry of resolved stars for a volume-limited sample of nearby galaxies (D < 4 Mpc). The survey volume encompasses 69 galaxies in diverse environments, including close pairs, small and large groups, filaments, and truly isolated regions. The galaxies include a nearly complete range of morphological types spanning a factor of ~104 in luminosity and star formation rate. The survey data consist of images taken with the Advanced Camera for Surveys (ACS) on the Hubble Space Telescope (HST), supplemented with archival data and new Wide Field Planetary Camera 2 (WFPC2) imaging taken after the failure of ACS. Survey images include wide field tilings covering the full radial extent of each galaxy, and single deep pointings in uncrowded regions of the most massive galaxies in the volume. The new wide field imaging in ANGST reaches median 50% completenesses of m F475W = 28.0 mag, m F606W = 27.3 mag, and m F814W = 27.3 mag, several magnitudes below the tip of the red giant branch (TRGB). The deep fields reach magnitudes sufficient to fully resolve the structure in the red clump. The resulting photometric catalogs are publicly accessible and contain over 34 million photometric measurements of >14 million stars. In this paper we present the details of the sample selection, imaging, data reduction, and the resulting photometric catalogs, along with an analysis of the photometric uncertainties (systematic and random), for both ACS and WFPC2 imaging. We also present uniformly derived relative distances measured from the apparent magnitude of the TRGB.

  11. Level structure and reflection asymmetric shape in sup 223 Ac

    SciTech Connect

    Sheline, R.K.; Liang, C.F.; Paris, P. )

    1990-07-20

    Mass separated sources of {sup 227}Pa (separated as PaF{sub 4}{sup +} ions) were used to study the level structure of {sup 223}Ac following alpha decay. The levels in {sup 223}Ac are interpreted as K = 5/2{sup {plus minus}} parity doublet bands which occur naturally in reflection asymmetric models and the multiphonon octupole model. The anomalous structure of the K = 3/2{sup {minus}} band is explained in terms of Coriolis coupling. The low lying parity doublet bands in {sup 223}Ac, {sup 225}Ac, and {sup 227}Ac are compared and contrasted.

  12. Channel model for AC electric arc

    NASA Astrophysics Data System (ADS)

    Larsen, H. L.

    1993-06-01

    This report contains the results from calculations of free-burning AC electric arcs in argon. In order to calculate the arc current and arc voltage, the external electric circuit must be taken into consideration. The external circuit is modeled by an equivalent circuit consisting of an ideal AC voltage source, a loss resistance, and an inductance. The qualitative behavior of the current-voltage characteristic is in agreement with observed characteristics, but experimental data are necessary in order to check whether the calculated power loss is reasonable. Non-symmetry was modeled by introducing different anode and cathode falls in the two half periods. An attempt at taking into account different cathode current densities in the two half periods, depending on whether the electrode or silicon melt is cathode, did not give satisfactory results. Thermionic emission was assumed in both half periods, but this may not be the right mechanism when the silicon melt is cathode. The time delay of the AC arc compared to the DC case is modeled by a time constant. It was shown that this preset time constant must be in agreement with the mean 'mechanical' relaxation time in the arc in order to fulfill the energy balance. By updating the time constant until this is achieved, the time constant is eliminated as a parameter that must be chosen a priori.

  13. The ACS Nearby Galaxy Survey Treasury

    NASA Astrophysics Data System (ADS)

    Weisz, Daniel R.

    2010-01-01

    The ACS Nearby Galaxy Survey Treasury (ANGST) is a systematic survey to establish a legacy of uniform multi-color photometry of resolved stars for a volume-limited sample of nearby galaxies (D<4Mpc). The survey volume encompasses 69 galaxies in diverse environments, including close pairs, small & large groups, filaments, and truly isolated regions. The galaxies include a nearly complete range of morphological types spanning a factor of 104 in luminosity and star formation rate. The survey data consists of images taken with the Advanced Camera for Surveys (ACS) on the Hubble Space Telescope, supplemented with archival data and new Wide Field Planetary Camera (WFPC2) imaging taken after the failure of ACS. Survey images include wide field tilings covering the full radial extent of each galaxy, and single deep pointings in uncrowded regions of the most massive galaxies in the volume. We will discuss the many ways in which this data set is being used to reconstruct the star formation history of galaxies within the local volume.

  14. Usefulness of electromyography of the cavernous corpora (CC EMG) in the diagnosis of arterial erectile dysfunction.

    PubMed

    Virseda-Chamorro, M; Lopez-Garcia-Moreno, A M; Salinas-Casado, J; Esteban-Fuertes, M

    2012-01-01

    Electromyography (EMG) of the corpora cavernosa (CC-EMG) is able to record the activity of the erectile tissue during erection, and thus has been used as a diagnostic technique in patients with erectile dysfunction (ED). The present study examines the usefulness of the technique in the diagnosis of arterial ED. A cross-sectional study was made of 35 males with a mean age of 48.5 years (s.d. 11.34), referred to our center with ED for >1 year. The patients were subjected to CC-EMG and a penile Doppler ultrasound study following the injection of 20 μg of prostaglandin E1 (PGE1). The patients were divided into three groups according to their response to the intracavernous injection of PGE1: Group 1 (adequate erection and reduction/suppression of EMG activity); Group 2 (insufficient erection and persistence of EMG activity); and Group 3 (insufficient erection and reduction/suppression of EMG activity). Patient classification according to response to the intracavernous injection of PGE1 was as follows: Group 1: six patients (17%), Group 2: 18 patients (51%), and Group 3: 11 patients (31%). Patients diagnosed with arterial insufficiency according to Doppler ultrasound (systolic arterial peak velocity <30 mm s(-1) in both arteries) were significantly older than those without such damage (54.5 versus 41.8 years, respectively; s.d. 11.12). The patients in Group 3 showed a significantly lower maximum systolic velocity in both arteries than the subjects belonging to Group 2. Likewise, a statistically significant relationship was observed between the diagnosis of arterial insufficiency and patient classification in Group 3. The confirmation of insufficient erection associated with reduction/suppression of EMG activity showed a sensitivity of 66.7% (confidence interval between 50 and 84%) and a specificity of 92.9% (confidence interval between 84 and 100%) in the diagnosis of arterial ED. Owing to the high specificity of CC-EMG response to the injection of PGE1, this test is

  15. CYP7A1 (-204 A>C; rs3808607 and -469 T>C; rs3824260) promoter polymorphisms and risk of gallbladder cancer in North Indian population.

    PubMed

    Srivastava, Anvesha; Choudhuri, Gourdas; Mittal, Balraj

    2010-06-01

    Cholesterol 7-alpha hydroxylase (CYP7A1), which is a rate-limiting enzyme for cholesterol catabolism and bile acid synthesis, may affect cholesterol homeostasis and result in gallstone formation that is a major risk factor for gallbladder cancer (GBC) pathogenesis. Genetic variations in CYP7A1 may influence its expression and thus may affect the risk of gallstone disease and GBC. We aimed to study the association of 2 promoter polymorphisms of CYP7A1 (-204 A>C [rs3808607] and -469 T>C [rs3824260]) in gallstone and GBC susceptibility in North Indian population. The study included 185 GBC patients, 195 symptomatic gallstone patients, and 200 healthy controls. Genotyping for both polymorphisms was done by polymerase chain reaction-restriction fragment length polymorphism method. Although the CC genotype of CYP7A1 -204 A>C was not significantly associated with gallstone disease (P = .083, odds ratio [OR] = 1.69, 95% confidence interval [CI] = 0.9-3.0), it was conferring higher risk for GBC (P = .018, OR = 2.05, 95% CI = 1.1-3.7). However, CYP7A1 -469 T>C was not associated with gallstone disease and GBC risk in our population. After subgroup stratifications on the basis of sex and gallstone status, CC genotype and variant allele of CYP7A1 -204 A>C imparted higher risk for GBC in women (P = .003, OR = 3.30, 95% CI = 1.5-7.2) and patients without gallstones (P = .045, OR = 1.91, 95% CI = 1.2-3.6). Haplotype analysis of the 2 polymorphisms showed that C,T (P = .045, OR = 1.84, 95% CI = 1.0-3.3) and C,C (P = .0001, OR = 3.10, 95% CI = 1.6-6.0) haplotypes had elevated risk of GBC predisposition. CYP7A1 -469 T>C is not associated with gallstone disease or GBC risk. Although CYP7A1 -204 A>C might play a modest role in gallstone susceptibility, it is an independent risk factor for GBC in North Indian population. Underlying mechanism for GBC susceptibility by CYP7A1 (-204 A>C and -469 T>C) haplotype appears to be independent of gallstone pathway and is believed to involve

  16. A g.-1256 A>C in the promoter region of CAPN1 is associated with semen quality traits in Chinese Holstein bulls.

    PubMed

    Cui, Xiaohui; Sun, Yan; Wang, Xiuge; Yang, Chunhong; Ju, Zhihua; Jiang, Qiang; Zhang, Yan; Huang, Jinming; Zhong, Jifeng; Yin, Miao; Wang, Changfa

    2016-07-01

    The micromolar calcium-activated neutral protease gene (CAPN1) is a physiological candidate gene for sperm motility. However, the molecular mechanisms involved in regulating the expression of the CAPN1 gene in bulls remain unknown. In this study, we investigated the expression pattern of CAPN1 in testis, epididymis, and sperm at the RNA and protein levels by qRT-PCR, western blot, immunohistochemistry, and immunofluorescence assay. Results revealed that the expression of CAPN1 levels was higher in the sperm head compared with that in other tissues. Moreover, we identified a novel single-nucleotide polymorphism (g.-1256 A>C, ss 1917715340) in the noncanonical core promoter of the CAPN1 gene between base g.-1306 and g.-1012. Additionally, we observed greater sperm motility in bulls with the genotype CC than in those with the genotype AA (P<0.01), indicating that different genotypes were associated with the bovine semen trait. Furthermore, a higher fluorescence intensity of the C allele than that of the A allele at g. -1256 A>C was revealed by transient transfection in MLTC-1 cells and luciferase report assay. Finally, CAPN1 was highly expressed in the spermatozoa with the CC genotype compared with that with the AA genotype by qRT-PCR. This study is the first report on genetic variant g.-1256 A>C in the promoter region of CAPN1 gene association with the semen quality of Chinese Holstein bulls by influencing its expression. g.-1256 A>C can be a functional molecular marker in cattle breeding.

  17. Association of CYP7A1 -278A>C polymorphism and the response of plasma triglyceride after dietary intervention in dyslipidemic patients.

    PubMed

    Barcelos, A L V; Chies, R; Almeida, S E M; Fiegenbaum, M; Schweigert, I D; Chula, F G L; Rossetti, M L; Silva, C M D

    2009-06-01

    We investigated the effect of the -278A>C polymorphism in the CYP7A1 gene on the response of plasma lipids to a reduced-fat diet for 6 to 8 weeks in a group of 82 dyslipidemic males with a mean age of 46.0 +/- 11.7 years. Individuals who presented at least one high alteration in total cholesterol, low-density lipoprotein cholesterol or triglyceride values were considered to be dyslipidemic. Exclusion criteria were secondary dyslipidemia due to diabetes mellitus, renal, liver, or thyroid disease. None of the subjects were using lipid-lowering medication. Baseline and follow-up lipid concentrations were measured. The genotypes were determined by the digestion of PCR products with the BsaI restriction endonuclease. There were statistically significant reductions in plasma total cholesterol, low-density lipoprotein cholesterol and triglyceride concentrations after dietary intervention. The minor allele C has a frequency of 43%. Carriers of the C allele had significantly lower triglyceride concentrations (P = 0.02) than AA homozygotes. After adjustment of covariates, subjects with the AC and CC genotypes showed a greater reduction in triglyceride concentrations compared to subjects with the AA genotype. Multiple linear regression analyses showed that the AC and CC CYP7A1 genotypes accounted for 5.2 and 6.2% of triglyceride concentration during follow-up and adjusted percent of change of triglyceride concentration, respectively. The present study provides evidence that -278A>C polymorphism in the CYP7A1 gene can modify triglyceride concentrations in response to a reduced fat diet in a dyslipidemic male population. This gene represents a potential locus for a nutrigenetic directed approach.

  18. Analysis of factors responsible for the accelerated creep rupture of 12% Cr martensitic steel weld joints

    NASA Astrophysics Data System (ADS)

    Kudryavtsev, A. S.; Okhapkin, K. A.; Mikhailov, M. S.; Skutin, V. S.; Zubova, G. E.; Fedotov, B. V.

    2016-06-01

    In the process of the investigation of the heat resistance of a 0.07C-12Cr-Ni-Mo-V-Nb steel of the martensitic-ferritic class, a reduction was revealed in the long-term strength of its welded joints to below the level of the strength of the base metal. To establish the causes for the accelerated failure of the welded joints, an imitation of the thermal cycles was carried out that produce the structure of the heataffected zone using a dilatometer. In the samples with the structure that corresponds to that of the heataffected zone, a local zone of softening was revealed. The investigations of the metal structure using transmission electron microscopy have shown that the reduction in the creep rupture strength was caused by structural changes under the conditions of the thermal cycle of welding upon the staying of the steel in the temperature range between the Ac 1 and Ac 3 points.

  19. Total AC losses in twisted and untwisted multifilamentary Bi-2223 superconducting tapes carrying AC transport current in AC longitudinal magnetic field

    NASA Astrophysics Data System (ADS)

    Amemiya, Naoyuki; Jin, Feng; Jiang, Zhenan; Shirai, Shunsuke; ten Haken, Bennie; Rabbers, Jan-Jaap; Ayai, Naoki; Hayashi, Kazuhiko

    2003-03-01

    In some electrical apparatuses, superconducting tapes are exposed to the longitudinal magnetic field. In this work, AC losses were measured in twisted and untwisted Bi-2223 tapes carrying AC transport current in the AC longitudinal magnetic field. In twisted tapes, the transport, magnetization and total losses depend on the relative direction of the longitudinal magnetic field to the direction of the transport current, while the field direction does not influence the AC loss characteristics in untwisted tapes. In the Z-twisted tapes, the total AC loss is larger in the longitudinal magnetic field that is anti-parallel to the transport current than in the longitudinal magnetic field of another direction. Numerical analysis shows that this field direction dependence of the total AC loss results from the change in the current distribution. In the longitudinal magnetic field that is anti-parallel to the transport current, the total AC loss in the Z-twisted tape is more than that in the untwisted tape. This dependence on the field direction is reversed in S-twisted tapes. It is to be noted that the twist increases the total AC loss in a longitudinal magnetic field of a certain direction, while it reduces the AC loss in the transverse magnetic field.

  20. AC loss measurements of twisted and untwisted BSCCO multifilamentary tapes

    NASA Astrophysics Data System (ADS)

    Jiang, Zhenan; Amemiya, Naoyuki; Nishioka, Takamasa; Oh, Sang-Soo

    2005-01-01

    AC losses in twisted and untwisted BSCCO multifilamentary superconducting tapes with Ag matrix developed in DAPAS program were measured by an electrical method. Magnetization and transport losses were measured by a pick-up coil and by a voltage taps. Total AC loss during simultaneous application of AC transport current and an AC transverse magnetic field was given by the sum of the magnetization and transport losses measured during this simultaneous application. The magnetization loss without transport current of untwisted and twisted tapes was measured first to evaluate the effect of twisting to decouple filaments. Then, the total AC loss of the twisted tape was measured in transverse magnetic fields with various amplitudes and orientations, while the amplitude of the transport current was fixed. The measured total AC loss in a parallel transverse magnetic field was compared with some theoretical models to study the detailed characteristics of the measured total AC loss of the sample.

  1. Development of a hardware-based AC microgrid for AC stability assessment

    NASA Astrophysics Data System (ADS)

    Swanson, Robert R.

    As more power electronic-based devices enable the development of high-bandwidth AC microgrids, the topic of microgrid power distribution stability has become of increased interest. Recently, researchers have proposed a relatively straightforward method to assess the stability of AC systems based upon the time-constants of sources, the net bus capacitance, and the rate limits of sources. In this research, a focus has been to develop a hardware test system to evaluate AC system stability. As a first step, a time domain model of a two converter microgrid was established in which a three phase inverter acts as a power source and an active rectifier serves as an adjustable constant power AC load. The constant power load can be utilized to create rapid power flow transients to the generating system. As a second step, the inverter and active rectifier were designed using a Smart Power Module IGBT for switching and an embedded microcontroller as a processor for algorithm implementation. The inverter and active rectifier were designed to operate simultaneously using a synchronization signal to ensure each respective local controller operates in a common reference frame. Finally, the physical system was created and initial testing performed to validate the hardware functionality as a variable amplitude and variable frequency AC system.

  2. The Hubble Legacy Archive ACS grism data

    NASA Astrophysics Data System (ADS)

    Kümmel, M.; Rosati, P.; Fosbury, R.; Haase, J.; Hook, R. N.; Kuntschner, H.; Lombardi, M.; Micol, A.; Nilsson, K. K.; Stoehr, F.; Walsh, J. R.

    2011-06-01

    A public release of slitless spectra, obtained with ACS/WFC and the G800L grism, is presented. Spectra were automatically extracted in a uniform way from 153 archival fields (or "associations") distributed across the two Galactic caps, covering all observations to 2008. The ACS G800L grism provides a wavelength range of 0.55-1.00 μm, with a dispersion of 40 Å/pixel and a resolution of ~80 Å for point-like sources. The ACS G800L images and matched direct images were reduced with an automatic pipeline that handles all steps from archive retrieval, alignment and astrometric calibration, direct image combination, catalogue generation, spectral extraction and collection of metadata. The large number of extracted spectra (73,581) demanded automatic methods for quality control and an automated classification algorithm was trained on the visual inspection of several thousand spectra. The final sample of quality controlled spectra includes 47 919 datasets (65% of the total number of extracted spectra) for 32 149 unique objects, with a median iAB-band magnitude of 23.7, reaching 26.5 AB for the faintest objects. Each released dataset contains science-ready 1D and 2D spectra, as well as multi-band image cutouts of corresponding sources and a useful preview page summarising the direct and slitless data, astrometric and photometric parameters. This release is part of the continuing effort to enhance the content of the Hubble Legacy Archive (HLA) with highly processed data products which significantly facilitate the scientific exploitation of the Hubble data. In order to characterize the slitless spectra, emission-line flux and equivalent width sensitivity of the ACS data were compared with public ground-based spectra in the GOODS-South field. An example list of emission line galaxies with two or more identified lines is also included, covering the redshift range 0.2 - 4.6. Almost all redshift determinations outside of the GOODS fields are new. The scope of science projects

  3. Combustion Gas Heating Tests of C/C Composites Coated with SiC Layer

    NASA Astrophysics Data System (ADS)

    Sato, Masaki; Moriya, Shin-ichi; Sato, Masahiro; Tadano, Makoto; Kusaka, Kazuo; Hasegawa, Keiichi; Kumakawa, Akinaga; Yoshida, Makoto

    2008-02-01

    In order to examine the applicability of carbon fiber/carbon matrix composites coated with a silicon carbide layer (C/C-SiCs) to an advanced nozzle for the future reusable rocket engines, two series of combustion gas heating tests were conducted using a small rocket combustor. In the first series of heating tests, five different kinds of C/C-SiCs were tested with specimens in the shape of a square plate for material screening. In the second series of heating tests, two selected C/C-SiCs were tested with specimens in the shape of a small nozzle. The effectiveness of an interlayer between a C/C composite and a SiC layer, which was introduced to improve the durability based on the concept of functionally graded materials (FGMs), can be observed. The typical damage mode was also pointed out in the results of heating test using the small nozzle specimens.

  4. Architectural Visualization of C/C++ Source Code for Program Comprehension

    SciTech Connect

    Panas, T; Epperly, T W; Quinlan, D; Saebjornsen, A; Vuduc, R

    2006-09-01

    Structural and behavioral visualization of large-scale legacy systems to aid program comprehension is still a major challenge. The challenge is even greater when applications are implemented in flexible and expressive languages such as C and C++. In this paper, we consider visualization of static and dynamic aspects of large-scale scientific C/C++ applications. For our investigation, we reuse and integrate specialized analysis and visualization tools. Furthermore, we present a novel layout algorithm that permits a compressive architectural view of a large-scale software system. Our layout is unique in that it allows traditional program visualizations, i.e., graph structures, to be seen in relation to the application's file structure.

  5. A Homogeneous, Recyclable Polymer Support for Rh(I)-Catalyzed C-C Bond Formation

    PubMed Central

    Jana, Ranjan; Tunge, Jon A.

    2011-01-01

    A robust and practical polymer-supported, homogeneous, recyclable biphephos rhodium(I) catalyst has been developed for C-C bond formation reactions. Control of polymer molecular weight allowed tuning of the polymer solubility such that the polymer-supported catalyst is soluble in nonpolar solvents and insoluble in polar solvents. Using the supported rhodium catalysts, addition of aryl and vinylboronic acids to the electrophiles such as enones, aldehydes, N-sulfonyl aldimines, and alkynes occurs smoothly to provide products in high yields. Additions of terminal alkynes to enones and industrially relevant hydroformylation reactions have also been successfully carried out. Studies show that the leaching of Rh from the polymer support is low and catalyst recycle can be achieved by simple precipitation and filtration. PMID:21895010

  6. Matching plasmon resonances to the C=C and C-H bonds in estradiol

    NASA Astrophysics Data System (ADS)

    Mbomson, Ifeoma G.; McMeekin, Scott; De La Rue, Richard; Johnson, Nigel P.

    2015-03-01

    We tune nanoantennas to resonate within mid-infrared wavelengths to match the vibrational resonances of C=C and C-H of the hormone estradiol. Modelling and fabrication of the nanoantennas produce plasmon resonances between 2 μm to 7 μm. The hormone estradiol was dissolved in ethanol and evaporated, leaving thickness of a few hundreds of nanometres on top of gold asymmetric split H-like shaped on a fused silica substrate. The reflectance was measured and a red-shift is recorded from the resonators plasmonic peaks. Fourier transform infrared spectroscopy is use to observe enhanced spectra of the stretching modes for the analyte which belongs to alkenyl biochemical group.

  7. Complex absorbing potentials within EOM-CC family of methods: Theory, implementation, and benchmarks

    SciTech Connect

    Zuev, Dmitry; Jagau, Thomas-C.; Krylov, Anna I.; Bravaya, Ksenia B.; Epifanovsky, Evgeny; Shao, Yihan; Sundstrom, Eric; Head-Gordon, Martin

    2014-07-14

    A production-level implementation of equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) for electron attachment and excitation energies augmented by a complex absorbing potential (CAP) is presented. The new method enables the treatment of metastable states within the EOM-CC formalism in a similar manner as bound states. The numeric performance of the method and the sensitivity of resonance positions and lifetimes to the CAP parameters and the choice of one-electron basis set are investigated. A protocol for studying molecular shape resonances based on the use of standard basis sets and a universal criterion for choosing the CAP parameters are presented. Our results for a variety of π{sup *} shape resonances of small to medium-size molecules demonstrate that CAP-augmented EOM-CCSD is competitive relative to other theoretical approaches for the treatment of resonances and is often able to reproduce experimental results.

  8. C/C++ Coding for Matrix Pseudo Inverses in Clinical Near Infrared Spectroscopy.

    PubMed

    Gagnon, ROY E.; Macnab, ANDREW J.

    1998-01-01

    Near infrared spectroscopy is used clinically to investigate patterns of change in cerebral oxygenation. We have shown that differences reported between authors are likely the result of computer encoding errors in the manipulation of matrices. Current methods compute the inverse of a non-square matrix to derive chromophore concentration values, and solution of another non-square matrix to derive polynomial coefficients of a least squares best fit curve from which the first derivative can be used to estimate blood flow values. Encoding of these pseudo inverses involves too many nested looping steps to easily identify encoding errors. We have given C/C++ source code along with sample numerical values at the termination of each loop within the algorithm. This provides counter checking for future software development by other programmers, and also permits other investigators to report whether the software used for their experiments agrees with previously published material.

  9. Iron-Catalyzed C-C Cross-Couplings Using Organometallics.

    PubMed

    Guérinot, Amandine; Cossy, Janine

    2016-08-01

    Over the last decades, iron-catalyzed cross-couplings have emerged as an important tool for the formation of C-C bonds. A wide variety of alkenyl, aryl, and alkyl (pseudo)halides have been coupled to organometallic reagents, the most currently used being Grignard reagents. Particular attention has been devoted to the development of iron catalysts for the functionalization of alkyl halides that are generally challenging substrates in classical cross-couplings. The high functional group tolerance of iron-catalyzed cross-couplings has encouraged organic chemists to use them in the synthesis of bioactive compounds. Even if some points remain obscure, numerous studies have been carried out to investigate the mechanism of iron-catalyzed cross-coupling and several hypotheses have been proposed.

  10. Design of belt conveyor electric control device based on CC-link bus

    NASA Astrophysics Data System (ADS)

    Chen, Goufen; Zhan, Minhua; Li, Jiehua

    2016-01-01

    In view of problem of the existing coal mine belt conveyor is no field bus communication function, two levels belt conveyor electric control system design is proposed based on field bus. Two-stage belt conveyor electric control system consists of operation platform, PLC control unit, various sensors, alarm device and the water spraying device. The error protection is realized by PLC programming, made use of CC-Link bus technology, the data share and the cooperative control came true between host station and slave station. The real-time monitor was achieved by the touch screen program. Practical application shows that the system can ensure the coalmine production, and improve the automatic level of the coalmine transport equipment.

  11. Joint Services Electronics Program.

    DTIC Science & Technology

    1980-09-30

    O no~ On A’. JOINT SERVICES ELECTRONICS PROGRAM ANNUAL PROGRESS REPORT (CONTRACT F49620-79-C-0178) 1 September 1979 - 31 August 1980 by D.J...dCis0ributUonEunlimiAed. If. DISTRIBUTION STATEMENT (of ehl. Rbept) ie~ iSok2,I flr, o eo Apeprovedneticublid statae; electronuis: maiterasd dvcs unu It. AUST WRDS...nun- erical analysis endeavors. 1 The accuracy of the system has been shown to be reliable for cross-sections on the order of o /A 2 - 1. 2. Computation

  12. Posttraumatic Temporomandibular Joint Disorders

    PubMed Central

    Giannakopoulos, Helen E.; Quinn, Peter D.; Granquist, Eric; Chou, Joli C.

    2009-01-01

    The temporomandibular joint (TMJ) has many essential functions. None of its components are exempt from injury. Facial asymmetry, malocclusion, disturbances in growth, osteoarthritis, and ankylosis can manifest as complications from trauma to the TMJ. The goals of initial treatment include achievement of pretraumatic function, restoration of facial symmetry, and resolution of pain. These same objectives hold true for late repairs and reconstruction of the TMJ apparatus. Treatment is demanding, and with opposing approaches. The following article explores various treatment options for problems presenting as a result of a history of trauma to the TMJ. PMID:22110802

  13. Joint Services Electronics Program.

    DTIC Science & Technology

    2014-09-26

    RAD-A158 731 JOINT SERVICES ELECTRONICS PROGRBM(U) C BERKELEY ELECTRONICS RESEARCH LAB W G OLDHAN 38 APR 85 UCBERL-85-1 AFOSR-TR-85-8669 F49620-84-C...RESEARCH LABORATORY College of Engineering * ’University of California, Berkeley , CA 94720 • .’, - .. +- -’-’. .’’ "+ ’ " - ,’? .( i.". - "" -. ) 7...ELECTRONICS RESEARCH LABORATORY College of Engineering University of California, Berkeley , CA 94720 .. 4 MTV.? CLASSIFICATION OF THIS PAGE (When Dioseed

  14. Reoperative temporomandibular joint surgery.

    PubMed

    Vega, Luis G; Gutta, Rajesh; Louis, Patrick

    2011-02-01

    TMJ surgeries are not always successful. Many potential pitfalls can occur during any phase of the treatment and can lead to complications, less than desirable results, and short- or long-term failures. Unsatisfactory results can occur for multiple reasons, including misdiagnosis of the original pathologic condition, incorrect selection of surgical technique, technical failures, complications, systemic disease, and unrealistic expectations. This article focuses on the reoperation of the TMJ primarily in cases of internal derangement and discusses TMJ arthrocentesis, arthroscopy, modified condylotomy, and open joint procedures.

  15. Joint hypermobility syndrome.

    PubMed

    Fikree, Asma; Aziz, Qasim; Grahame, Rodney

    2013-05-01

    Although perceived as a rare condition, joint hypermobility syndrome is common. Its prevalence in rheumatology clinics is extremely high. Early estimates suggest that it may be the most common of all rheumatologic conditions. The problem lies in the general lack of awareness of the syndrome, its means of recognition, and the resultant failure to diagnose it correctly when present. It is a worldwide problem. This article provides an overview of hypermobility and hypermobility syndrome, stressing its multisystemic nature and the negative impact that it may have on quality of life, with particular reference to gastrointestinal involvement.

  16. Jointness: A Selected Bibliography

    DTIC Science & Technology

    1993-10-01

    Research Report. Maxwell Air Force Base: US Air University, Air War College, 1989. 55pp. (UG635.3 .U5 RR-89 C54) Colley , Jackie W. CINCFOR...Command, 1973-1993, by John L. Romjue, Susan Canedy, and Anne W. Chapman. Fort Monroe: 1993. Pp. 65-73: "TRADOC in the Joint Service Arena." (U408.3...Proceedings - U.S. Naval Institute, Vol. 119, June 1993, pp. 64-65. Flores, Susan J. "Let’s Play Ball." Marine Corps Gazette, Vol. 74, October 1990, pp. 60-61

  17. On representations for joint moments using a joint coordinate system.

    PubMed

    O'Reilly, Oliver M; Sena, Mark P; Feeley, Brian T; Lotz, Jeffrey C

    2013-11-01

    In studies of the biomechanics of joints, the representation of moments using the joint coordinate system has been discussed by several authors. The primary purpose of this technical brief is to emphasize that there are two distinct, albeit related, representations for moment vectors using the joint coordinate system. These distinct representations are illuminated by exploring connections between the Euler and dual Euler bases, the "nonorthogonal projections" presented in a recent paper by Desroches et al. (2010, "Expression of Joint Moment in the Joint Coordinate System," ASME J. Biomech. Eng., 132(11), p. 11450) and seminal works by Grood and Suntay (Grood and Suntay, 1983, "A Joint Coordinate System for the Clinical Description of Three-Dimensional Motions: Application to the Knee," ASME J. Biomech. Eng., 105(2), pp. 136-144) and Fujie et al. (1996, "Forces and Moment in Six-DOF at the Human Knee Joint: Mathematical Description for Control," Journal of Biomechanics, 29(12), pp. 1577-1585) on the knee joint. It is also shown how the representation using the dual Euler basis leads to straightforward definition of joint stiffnesses.

  18. A Numerical Study on the Thermal Conductivity of 3D Woven C/C Composites at High Temperature

    NASA Astrophysics Data System (ADS)

    Shigang, Ai; Rujie, He; Yongmao, Pei

    2015-12-01

    Experimental data for Carbon/Carbon (C/C) constituent materials are combined with a three dimensional steady state heat transfer finite element analysis to demonstrate the average in-plane and out-of-plane thermal conductivities (TCs) of C/C composites. The finite element analysis is carried out at two distinct length scales: (a) a micro scale comparable with the diameter of carbon fibres and (b) a meso scale comparable with the carbon fibre yarns. Micro-scale model calculate the TCs at the fibre yarn scale in the three orthogonal directions ( x, y and z). The output results from the micro-scale model are then incorporated in the meso-scale model to obtain the global TCs of the 3D C/C composite. The simulation results are quite consistent with the theoretical and experimental counterparts reported in references. Based on the numerical approach, TCs of the 3D C/C composite are calculated from 300 to 2500 K. Particular attention is given in elucidating the variations of the TCs with temperature. The multi-scale models provide an efficient approach to predict the TCs of 3D textile materials, which is helpful for the thermodynamic property analysis and structure design of the C/C composites.

  19. Amide-directed photoredox-catalysed C-C bond formation at unactivated sp(3) C-H bonds.

    PubMed

    Chu, John C K; Rovis, Tomislav

    2016-11-10

    Carbon-carbon (C-C) bond formation is paramount in the synthesis of biologically relevant molecules, modern synthetic materials and commodity chemicals such as fuels and lubricants. Traditionally, the presence of a functional group is required at the site of C-C bond formation. Strategies that allow C-C bond formation at inert carbon-hydrogen (C-H) bonds enable access to molecules that would otherwise be inaccessible and the development of more efficient syntheses of complex molecules. Here we report a method for the formation of C-C bonds by directed cleavage of traditionally non-reactive C-H bonds and their subsequent coupling with readily available alkenes. Our methodology allows for amide-directed selective C-C bond formation at unactivated sp(3) C-H bonds in molecules that contain many such bonds that are seemingly indistinguishable. Selectivity arises through a relayed photoredox-catalysed oxidation of a nitrogen-hydrogen bond. We anticipate that our findings will serve as a starting point for functionalization at inert C-H bonds through a strategy involving hydrogen-atom transfer.

  20. Purification and characterization of a platelet aggregation inhibitor and anticoagulant Cc 5_NTase, CD 73-like, from Cerastes cerastes venom.

    PubMed

    Saoud, Samah; Chérifi, Fatah; Benhassine, Traki; Laraba-Djebari, Fatima

    2016-12-07

    The present study is the first attempt to report the characterization of a nucleotidase from Cerastes cerastes venom. A 70 kDa 5'-nucleotidase (Cc-5'NTase) was purified to homogeneity. The amino acid sequence of Cc-5'NTase displayed high homology with many nucleotidases. Its activity was optimal at pH 7 with a specific hydrolytic activity toward mono-, di-, and triphosphate adenylated nucleotides. Cc-5'NTase preferentially hydrolyzed ADP and obeyed Michaelis-Menten kinetics. Among the metals and inhibitors tested, Ni(2+) and Mg(2+) completely potentiated enzyme activity, whereas EGTA, PMSF, iodoacetamide, vanillic acid, vanillyl mandelic acid, and 1,10-phenanthroline partially abolished its activity. Cc-5'NTase was not lethal for mice at 5 mg/kg and exhibited in vivo anticoagulant effect. It also dose-dependently inhibited adenosine diphosphate-induced platelet aggregation by converting adenosine diphosphate to adenosine and prohibited arachidonic acid-induced aggregation but was not effective on fibrinogen-induced aggregation. Cc-5'NTase could be a good tool as pharmacological molecule in thrombosis diagnostic and/or therapy.

  1. The Electronegativity Analysis of c-C4F8 as a Potential Insulation Substitute of SF6

    NASA Astrophysics Data System (ADS)

    Zhao, Xiaoling; Jiao, Juntao; Li, Bing; Xiao, Dengming

    2016-03-01

    The density distributions related to gas electronegativity for c-C4F8 gas, including negative ion, electron number and electron energy densities in the discharge process, are derived theoretically in both plane-to-plane and point-to-plane electrode geometries. These calculations have been performed through the Boltzmann equation in the condition of a steady-state Townsend (SST) experiment and a fluid model in the condition of both uniform and non-uniform electric fields. The electronegativity coefficients a = n-/ne of c-C4F8 and SF6 are compared to further describe the electron affinity of c-C4F8. The result shows that c-C4F8 represents an obvious electron-attachment performance in the discharge process. However, c-C4F8 still has much weaker gas electronegativity than SF6, whose electronegativity coefficient is lower than that of SF6 by at least three orders of magnitude. supported by National Natural Science Foundation of China (No. 51337006)

  2. Energy Materials Coordinating Committee (EMaCC) annual technical report, fiscal year 1984 with fiscal year 1985 data

    SciTech Connect

    1985-07-01

    The Department of Energy funded about 374 million dollars of materials science and technology activities in both fiscal years 1984 and 1985. These funds and the commensurate program management responsibilities resided in 21 DOE program offices, each of which has its own mission and responsibilities. The Energy Materials Coordinating Committee (EMaCC) provides a formal mechanism to insure coordinated planning and maximum programmatic effectiveness for the Department's 374 million dollar per year materials effort. The EMaCC reports to the Director of the Office of Energy Research who in turn has oversight responsibilities for proper coordination of the technical programs of the Department. In carrying out this responsibility, EMaCC hosts meetings, organizes working groups, and publishes an annual technical report. This report is mandated by the EMaCC Terms of Reference. Its purpose is to disseminate information on the DOE materials programs for more effective coordination. It describes the materials research programs of various offices and divisions within the Department for FY 1984, contains funding information for FYs 1984 and 1985, and summarizes EMaCC activities for FY 1985.

  3. Amide-directed photoredox-catalysed C-C bond formation at unactivated sp3 C-H bonds

    NASA Astrophysics Data System (ADS)

    Chu, John C. K.; Rovis, Tomislav

    2016-11-01

    Carbon-carbon (C-C) bond formation is paramount in the synthesis of biologically relevant molecules, modern synthetic materials and commodity chemicals such as fuels and lubricants. Traditionally, the presence of a functional group is required at the site of C-C bond formation. Strategies that allow C-C bond formation at inert carbon-hydrogen (C-H) bonds enable access to molecules that would otherwise be inaccessible and the development of more efficient syntheses of complex molecules. Here we report a method for the formation of C-C bonds by directed cleavage of traditionally non-reactive C-H bonds and their subsequent coupling with readily available alkenes. Our methodology allows for amide-directed selective C-C bond formation at unactivated sp3 C-H bonds in molecules that contain many such bonds that are seemingly indistinguishable. Selectivity arises through a relayed photoredox-catalysed oxidation of a nitrogen-hydrogen bond. We anticipate that our findings will serve as a starting point for functionalization at inert C-H bonds through a strategy involving hydrogen-atom transfer.

  4. Synergy between coproduced CC and CXC chemokines in monocyte chemotaxis through receptor-mediated events.

    PubMed

    Gouwy, Mieke; Struyf, Sofie; Noppen, Samuel; Schutyser, Evemie; Springael, Jean-Yves; Parmentier, Marc; Proost, Paul; Van Damme, Jo

    2008-08-01

    CC and CXC chemokines coinduced in fibroblasts and leukocytes by cytokines and microbial agents determine the number of phagocytes infiltrating into inflamed tissues. Interleukin-8/CXCL8 and stromal cell-derived factor-1/CXCL12 significantly and dose-dependently increased the migration of monocytes, expressing the corresponding CXC chemokine receptors CXCR2 and CXCR4, toward suboptimal concentrations of the monocyte chemotactic proteins CCL2 or CCL7. These findings were confirmed using different chemotaxis assays and monocytic THP-1 cells. In contrast, the combination of two CC chemokines (CCL2 plus CCL7) or two CXC chemokines (CXCL8 plus CXCL12) did not provide synergy in monocyte chemotaxis. These data show that chemokines competing for related receptors and using similar signaling pathways do not synergize. Receptor heterodimerization is probably not essential for chemokine synergy as shown in CXCR4/CCR2 cotransfectants. It is noteworthy that CCL2 mediated extracellular signal-regulated kinase 1/2 phosphorylation and calcium mobilization was significantly enhanced by CXCL8 in monocytes, indicating cooperative downstream signaling pathways during enhanced chemotaxis. Moreover, in contrast to intact CXCL12, truncated CXCL12(3-68), which has impaired receptor signaling capacity but can still desensitize CXCR4, was unable to synergize with CCL2 in monocytic cell migration. Furthermore, AMD3100 and RS102895, specific CXCR4 and CCR2 inhibitors, respectively, reduced the synergistic effect between CCL2 and CXCL12 significantly. These data indicate that for synergistic interaction between chemokines binding and signaling of the two chemokines via their proper receptors is necessary.

  5. Novel CC chemokine receptor 4 antagonist RS-1154 inhibits ovalbumin-induced ear swelling in mice.

    PubMed

    Nakagami, Yasuhiro; Kawashima, Kayo; Yonekubo, Kazuki; Etori, Maki; Jojima, Takaaki; Miyazaki, Shojiro; Sawamura, Ryoko; Hirahara, Kazuki; Nara, Futoshi; Yamashita, Makoto

    2009-12-10

    CC chemokine ligand 17 (CCL17/thymus and activation-regulated chemokine: TARC) and CCL22 (macrophage-derived chemokine: MDC) selectively bind to CC chemokine receptor 4 (CCR4). The CCR4 system is considered to be responsible for the pathology of allergic diseases such as atopic dermatitis. To find and develop potential medicines against allergic diseases, we screened an in-house library to search for compounds having a profile as a CCR4 antagonist. From among the screening hits, we focused on 3-{2-[(2R)-2-phenyl-4-(4-pyridin-4-ylbenzyl)morpholin-2-yl]ethyl}quinazoline-2,4(1H,3H)-dione (named RS-1154), which had been newly synthesized in our laboratory. This compound inhibited the binding of [(125)I]CCL17 to human CCR4-expressing CHO cells with an IC(50) value of 27.7 nM and moreover inhibited CCL17-induced migration of DO11.10 mice-derived T helper 2 cells with an IC(50) value of 1.5 nM in vitro. We then examined the effect of RS-1154 in an ovalbumin-induced ear swelling assay. The ear thickness was decreased by intravenous administration of anti-CCL17 or anti-CCL22 antibodies, suggesting that the CCR4 system is involved in the ear swelling. Though partially, the oral administration of RS-1154 also significantly ameliorated the ear swelling at the doses of 30 and 100 mg/kg. Furthermore, the serum level of interleukin-4 decreased after the administration of RS-1154. In this study, we succeeded in obtaining a newly-synthesized compound, RS-1154, which has a potential to inhibit the chemotaxis of T helper 2 cells in vitro and to ameliorate ovalbumin-induced ear swelling in vivo. These results raise the possibility that RS-1154 or one of derivatives might become a therapeutic agent for atopic dermatitis patients.

  6. Structure of CC chemokine receptor 2 with orthosteric and allosteric antagonists

    SciTech Connect

    Zheng, Yi; Qin, Ling; Zacarías, Natalia V. Ortiz; de Vries, Henk; Han, Gye Won; Gustavsson, Martin; Dabros, Marta; Zhao, Chunxia; Cherney, Robert J.; Carter, Percy; Stamos, Dean; Abagyan, Ruben; Cherezov, Vadim; Stevens, Raymond C.; IJzerman, Adriaan P.; Heitman, Laura H.; Tebben, Andrew; Kufareva, Irina; Handel, Tracy M.

    2016-12-07

    CC chemokine receptor 2 (CCR2) is one of 19 members of the chemokine receptor subfamily of human class A G-protein-coupled receptors. CCR2 is expressed on monocytes, immature dendritic cells, and T-cell subpopulations, and mediates their migration towards endogenous CC chemokine ligands such as CCL2 (ref. 1). CCR2 and its ligands are implicated in numerous inflammatory and neurodegenerative diseases2 including atherosclerosis, multiple sclerosis, asthma, neuropathic pain, and diabetic nephropathy, as well as cancer3. These disease associations have motivated numerous preclinical studies and clinical trials4 (see http://www.clinicaltrials.gov) in search of therapies that target the CCR2–chemokine axis. To aid drug discovery efforts5, here we solve a structure of CCR2 in a ternary complex with an orthosteric (BMS-681 (ref. 6)) and allosteric (CCR2-RA-[R]7) antagonist. BMS-681 inhibits chemokine binding by occupying the orthosteric pocket of the receptor in a previously unseen binding mode. CCR2-RA-[R] binds in a novel, highly druggable pocket that is the most intracellular allosteric site observed in class A G-protein-coupled receptors so far; this site spatially overlaps the G-protein-binding site in homologous receptors. CCR2-RA-[R] inhibits CCR2 non-competitively by blocking activation-associated conformational changes and formation of the G-protein-binding interface. The conformational signature of the conserved microswitch residues observed in double-antagonist-bound CCR2 resembles the most inactive G-protein-coupled receptor structures solved so far. Like other protein–protein interactions, receptor–chemokine complexes are considered challenging therapeutic targets for small molecules, and the present structure suggests diverse pocket epitopes that can be exploited to overcome obstacles in drug design.

  7. Evolutionary blueprint for host- and niche-adaptation in Staphylococcus aureus clonal complex CC30

    PubMed Central

    McGavin, Martin J.; Arsic, Benjamin; Nickerson, Nicholas N.

    2012-01-01

    Staphylococcus aureus clonal complex CC30 has caused infectious epidemics for more than 60 years, and, therefore, provides a model system to evaluate how evolution has influenced the disease potential of closely related strains. In previous multiple genome comparisons, phylogenetic analyses established three major branches that evolved from a common ancestor. Clade 1, comprised of historic pandemic phage type 80/81 methicillin susceptible S. aureus (MSSA), and Clade 2 comprised of contemporary community acquired methicillin resistant S. aureus (CA-MRSA) were hyper-virulent in murine infection models. Conversely, Clade 3 strains comprised of contemporary hospital associated MRSA (HA-MRSA) and clinical MSSA exhibited attenuated virulence, due to common single nucleotide polymorphisms (SNP's) that abrogate production of α-hemolysin Hla, and interfere with signaling of the accessory gene regulator agr. We have now completed additional in silico genome comparisons of 15 additional CC30 genomes in the public domain, to assess the hypothesis that Clade 3 has evolved to favor niche adaptation. In addition to SNP's that influence agr and hla, other common traits of Clade 3 include tryptophan auxotrophy due to a di-nucleotide deletion within trpD, a premature stop codon within isdH encoding an immunogenic cell surface protein involved in iron acquisition, loss of a genomic toxin–antitoxin (TA) addiction module, acquisition of S. aureus pathogenicity islands SaPI4, and SaPI2 encoding toxic shock syndrome toxin tst, and increased copy number of insertion sequence ISSau2, which appears to target transcription terminators. Compared to other Clade 3 MSSA, S. aureus MN8, which is associated with Staphylococcal toxic shock syndrome, exhibited a unique ISSau2 insertion, and enhanced production of toxic shock syndrome toxin encoded by SaPI2. Cumulatively, our data support the notion that Clade 3 strains are following an evolutionary blueprint toward niche-adaptation. PMID:22919639

  8. The role of chemokine C-C motif ligand 2 genotype and cerebrospinal fluid chemokine C-C motif ligand 2 in neurocognition among HIV-infected patients

    PubMed Central

    Thames, April D.; Briones, Marisa S.; Magpantay, Larry I.; Martinez-Maza, Otoniel; Singer, Elyse J.; Hinkin, Charles H.; Morgello, Susan; Gelman, Benjamin B.; Moore, David J.; Heizerling, Keith; Levine, Andrew J.

    2015-01-01

    Objectives We examined interrelationships between chemokine C-C motif ligand 2 (CCL2) genotype and expression of inflammatory markers in the cerebrospinal fluid (CSF), plasma viral load, CD4+ cell count and neurocognitive functioning among HIV-infected adults. We hypothesized that HIV-positive carriers of the ‘risk’ CCL2 −2578G allele, caused by a single nucleotide polymorphism (SNP) at rs1024611, would have a higher concentration of CCL2 in CSF, and that CSF CCL2 would be associated with both higher concentrations of other proinflammatory markers in CSF and worse neurocognitive functioning. Design A cross-sectional study of 145 HIV-infected individuals enrolled in the National NeuroAIDS Tissue Consortium cohort for whom genotyping, CSF and neurocognitive data were available. Methods Genomic DNA was extracted from peripheral blood mononuclear cells and/or frozen tissue specimens. CSF levels of CCL2, interleukin (IL)-2, IL-6, tumour necrosis factor-alpha (TNF-α), interferon-gamma (IFN-γ), soluble tumor necrosis factor receptor 2, sIL-6Rα, sIL-2, sCD14 and B-cell activating factor were quantified. Neurocognitive functioning was measured using a comprehensive battery of neuropsychological tests. Results Carriers of the CCL2 −2578G allele had a significantly higher concentration of CCL2 in CSF. CSF CCL2 level was positively and significantly associated with other CSF neuroinflammatory markers and worse cognitive functioning. There was a significant association between genotype and plasma viral load, such that carriers of the CCL2 −2578G allele with high viral load expressed greater levels of CCL2 and had higher neurocognitive deficit scores than other genotype/viral load groups. Conclusion Individuals with the CCL2 −2578G allele had higher levels of CCL2 in CSF, which was associated with increased pro-inflammatory markers in CSF and worse neurocognitive functioning. The results highlight the potential role of intermediate phenotypes in studies of

  9. Electromigration and thermomigration studies in composite high lead and eutectic tin-lead flip chip solder joint

    NASA Astrophysics Data System (ADS)

    Huang, Annie Tzuyu

    The effect of thermomigration and the combination effect of thermomigration and electromigration have been studied in composite SnPb flip chip solder joints. Because Al line on the silicon chip side is the major heat source exerted on flip chip solder joint, temperature gradient across the joint is induced when a long Al line is stressed with high current density. Under a estimated temperature gradient of 1000°C/cm, Sn-rich and Pb-rich phase separation is found to occur. Experimental results have shown that Sn-rich phase accumulates at the hot side and Pb-rich phase accumulates at the cold side after thermomigration. When solder bumps are current high current density, thermomigration was found to accompany electromigration. Not only Pb-rich phase migrated toward the anode side and Sn-rich phase migrated toward the cathode side due to electromigration, Sn-rich phase was found to migrate along the top of solder joint due to thermomigration. It was found that as void propagates along the top of the solder joint, current crowding region shifts with the tip of the void. This created a local hot spot and thus a lateral temperature gradient was induced for thermomigration to occur. To isolate the thermal effect from the current effect, ac stressing at 60 Hz was also utilized. Interestingly, ac seems to have an effect other than thermal effect due to the difference in microstructure evolution between pure thermomigration and ac case after stressing. Further investigation at different frequency is needed to fully understand the effect of ac. Furthermore, analysis was performed to explain the phenomena of phase separation and phase reversal in the solder joint considering a constraint volume within underfill. Both Kirkendall effect and back stress were considered. Finally, detail morphological change after thermomigration and electromigration were investigated. Grain refinement was found to occur at a certain stressing condition. Production of entropy and morphological

  10. Contribution of the P2X7 1513A/C loss-of-function polymorphism to extrapulmonary tuberculosis susceptibility in Tunisian populations.

    PubMed

    Ben-Selma, Walid; Ben-Kahla, Imen; Boukadida, Jalel; Harizi, Hedi

    2011-10-01

    The P2X7 receptor has been found to be linked to an increased risk for tuberculosis in some populations. In this study, we investigate whether the P2X7 receptor plays a role in increasing susceptibility to tuberculosis in Tunisia. We examined two 1513A/C and -762T/C polymorphisms at the P2X7 receptor in 168 patients with pulmonary TB (pTB), 55 patients with extrapulmonary TB (epTB) and 150 blood donors from Tunisia. Genotyping of 1513A/C and -762T/C polymorphisms was performed in purified genomic DNA using PCR-restriction fragment length polymorphism and allele-specific PCR, respectively. The 1513C, CC and AC loss-of-function allele and genotypes were overrepresented in the epTB group compared with the control group (45% vs. 17%, P=10(-8) ; 24% vs. 4%, P=3 × 10(-7) ; 42% vs. 27%, P=10(-3) , respectively). Additionally, they were associated with 3.83-, 11.86- and 3.15-fold risks of developing this clinical tuberculosis form, respectively. No associations between the -762T/C polymorphism and tuberculosis disease, as well as disease anatomic location were observed. Collectively, our results suggest that the P2X7 1513A/C loss-of-function polymorphism may contribute to susceptibility to epTB in Tunisian populations.

  11. Strength of Welded Aircraft Joints

    NASA Technical Reports Server (NTRS)

    Brueggeman, W C

    1937-01-01

    This investigation is a continuation of work started in 1928 and described in NACA-TR-348 which shows that the insertion of gusset plates was the most satisfactory way of strengthening a joint. Additional tests of the present series show that joints of this type could be improved by cutting out the portion of the plate between the intersecting tubes. T and lattice joints in thin-walled tubing 1 1/2 by 0.020 inch have somewhat lower strengths than joints in tubing of greater wall thickness because of failure by local buckling. In welding the thin-walled tubing, the recently developed "carburizing flux" process was found to be the only method capable of producing joints free from cracks. The "magnetic powder" inspection was used to detect cracks in the joints and flaws in the tubing.

  12. Metal to ceramic sealed joint

    DOEpatents

    Lasecki, J.V.; Novak, R.F.; McBride, J.R.

    1991-08-27

    A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system. 11 figures.

  13. Metal to ceramic sealed joint

    DOEpatents

    Lasecki, John V.; Novak, Robert F.; McBride, James R.

    1991-01-01

    A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system.

  14. Deletion of the AcMNPV core gene ac109 results in budded virions that are non-infectious

    SciTech Connect

    Fang Minggang; Nie, Yingchao; Theilmann, David A.

    2009-06-20

    Autographa californica multiple nucleopolyhedrovirus (AcMNPV) ac109 is a core gene and its function in the virus life cycle is unknown. To determine its role in the baculovirus life cycle, we used the AcMNPV bacmid system to generate an ac109 deletion virus (vAc{sup 109KO}). Fluorescence and light microscopy showed that transfection of vAc{sup 109KO} results in a single-cell infection phenotype. Viral DNA replication is unaffected and the development of occlusion bodies in vAc{sup 109KO}-transfected cells evidenced progression to the very late phases of viral infection. Western blot and confocal immunofluorescence analysis showed that AC109 is expressed in the cytoplasm and nucleus throughout infection. In addition, AC109 is a structural protein as it was detected in both budded virus (BV) and occlusion derived virus in both the envelope and nucleocapsid fractions. Titration assays by qPCR and TCID{sub 50} showed that vAc{sup 109KO} produced BV but the virions are non-infectious. The vAc{sup 109KO} BV were indistinguishable from the BV of repaired and wild type control viruses as determined by negative staining and electron microscopy.

  15. Phytomedicine in Joint Disorders

    PubMed Central

    Dragos, Dorin; Gilca, Marilena; Gaman, Laura; Vlad, Adelina; Iosif, Liviu; Stoian, Irina; Lupescu, Olivera

    2017-01-01

    Chronic joint inflammatory disorders such as osteoarthritis and rheumatoid arthritis have in common an upsurge of inflammation, and oxidative stress, resulting in progressive histological alterations and disabling symptoms. Currently used conventional medication (ranging from pain-killers to biological agents) is potent, but frequently associated with serious, even life-threatening side effects. Used for millennia in traditional herbalism, medicinal plants are a promising alternative, with lower rate of adverse events and efficiency frequently comparable with that of conventional drugs. Nevertheless, their mechanism of action is in many cases elusive and/or uncertain. Even though many of them have been proven effective in studies done in vitro or on animal models, there is a scarcity of human clinical evidence. The purpose of this review is to summarize the available scientific information on the following joint-friendly medicinal plants, which have been tested in human studies: Arnica montana, Boswellia spp., Curcuma spp., Equisetum arvense, Harpagophytum procumbens, Salix spp., Sesamum indicum, Symphytum officinalis, Zingiber officinalis, Panax notoginseng, and Whitania somnifera. PMID:28275210

  16. Jointly Sponsored Research Program

    SciTech Connect

    Everett A. Sondreal; John G. Hendrikson; Thomas A. Erickson

    2009-03-31

    U.S. Department of Energy (DOE) Cooperative Agreement DE-FC26-98FT40321 funded through the Office of Fossil Energy and administered at the National Energy Technology Laboratory (NETL) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy & Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying highly efficient, nonpolluting energy systems that meet the nation's requirements for clean fuels, chemicals, and electricity in the 21st century. The EERC in partnership with its nonfederal partners jointly performed 131 JSRP projects for which the total DOE cost share was $22,716,634 (38%) and the nonfederal share was $36,776,573 (62%). Summaries of these projects are presented in this report for six program areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, and (6) advanced materials. The work performed under this agreement addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration; near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources.

  17. Joint collaborative technology experiment

    NASA Astrophysics Data System (ADS)

    Wills, Michael; Ciccimaro, Donny; Yee, See; Denewiler, Thomas; Stroumtsos, Nicholas; Messamore, John; Brown, Rodney; Skibba, Brian; Clapp, Daniel; Wit, Jeff; Shirts, Randy J.; Dion, Gary N.; Anselmo, Gary S.

    2009-05-01

    Use of unmanned systems is rapidly growing within the military and civilian sectors in a variety of roles including reconnaissance, surveillance, explosive ordinance disposal (EOD), and force-protection and perimeter security. As utilization of these systems grows at an ever increasing rate, the need for unmanned systems teaming and inter-system collaboration becomes apparent. Collaboration provides a means of enhancing individual system capabilities through relevant data exchange that contributes to cooperative behaviors between systems and enables new capabilities not possible if the systems operate independently. A collaborative networked approach to development holds the promise of adding mission capability while simultaneously reducing the workload of system operators. The Joint Collaborative Technology Experiment (JCTE) joins individual technology development efforts within the Air Force, Navy, and Army to demonstrate the potential benefits of interoperable multiple system collaboration in a force-protection application. JCTE participants are the Air Force Research Laboratory, Materials and Manufacturing Directorate, Airbase Technologies Division, Force Protection Branch (AFRL/RXQF); the Army Aviation and Missile Research, Development, and Engineering Center Software Engineering Directorate (AMRDEC SED); and the Space and Naval Warfare Systems Center - Pacific (SSC Pacific) Unmanned Systems Branch operating with funding provided by the Joint Ground Robotics Enterprise (JGRE). This paper will describe the efforts to date in system development by the three partner organizations, development of collaborative behaviors and experimentation in the force-protection application, results and lessons learned at a technical demonstration, simulation results, and a path forward for future work.

  18. Phytomedicine in Joint Disorders.

    PubMed

    Dragos, Dorin; Gilca, Marilena; Gaman, Laura; Vlad, Adelina; Iosif, Liviu; Stoian, Irina; Lupescu, Olivera

    2017-01-16

    Chronic joint inflammatory disorders such as osteoarthritis and rheumatoid arthritis have in common an upsurge of inflammation, and oxidative stress, resulting in progressive histological alterations and disabling symptoms. Currently used conventional medication (ranging from pain-killers to biological agents) is potent, but frequently associated with serious, even life-threatening side effects. Used for millennia in traditional herbalism, medicinal plants are a promising alternative, with lower rate of adverse events and efficiency frequently comparable with that of conventional drugs. Nevertheless, their mechanism of action is in many cases elusive and/or uncertain. Even though many of them have been proven effective in studies done in vitro or on animal models, there is a scarcity of human clinical evidence. The purpose of this review is to summarize the available scientific information on the following joint-friendly medicinal plants, which have been tested in human studies: Arnica montana, Boswellia spp., Curcuma spp., Equisetum arvense, Harpagophytum procumbens, Salix spp., Sesamum indicum, Symphytum officinalis, Zingiber officinalis, Panax notoginseng, and Whitania somnifera.

  19. Ball-joint grounding ring

    NASA Technical Reports Server (NTRS)

    Aperlo, P. J. A.; Buck, P. A.; Weldon, V. A.

    1981-01-01

    In ball and socket joint where electrical insulator such as polytetrafluoroethylene is used as line to minimize friction, good electrical contact across joint may be needed for lightning protection or to prevent static-charge build-up. Electrical contact is maintained by ring of spring-loaded fingers mounted in socket. It may be useful in industry for cranes, trailers, and other applications requiring ball and socket joint.

  20. β1 Integrin Deficiency Results in Multiple Abnormalities of the Knee Joint*

    PubMed Central

    Raducanu, Aurelia; Hunziker, Ernst B.; Drosse, Inga; Aszódi, Attila

    2009-01-01

    The lack of β1 integrins on chondrocytes leads to severe chondrodysplasia associated with high mortality rate around birth. To assess the impact of β1 integrin-mediated cell-matrix interactions on the function of adult knee joints, we conditionally deleted the β1 integrin gene in early limb mesenchyme using the Prx1-cre transgene. Mutant mice developed short limbed dwarfism and had joint defects due to β1 integrin deficiency in articular regions. The articular cartilage (AC) was structurally disorganized, accompanied by accelerated terminal differentiation, altered shape, and disrupted actin cytoskeleton of the chondrocytes. Defects in chondrocyte proliferation, cytokinesis, and survival resulted in hypocellularity. However, no significant differences in cartilage erosion, in the expression of matrix-degrading proteases, or in the exposure of aggrecan and collagen II cleavage neoepitopes were observed between control and mutant AC. We found no evidence for disturbed activation of MAPKs (ERK1/2, p38, and JNK) in vivo. Furthermore, fibronectin fragment-stimulated ERK activation and MMP-13 expression were indistinguishable in control and mutant femoral head explants. The mutant synovium was hyperplastic and frequently underwent chondrogenic differentiation. β1-null synoviocytes showed increased proliferation and phospho-focal adhesion kinase expression. Taken together, deletion of β1 integrins in the limb bud results in multiple abnormalities of the knee joints; however, it does not accelerate AC destruction, perturb cartilage metabolism, or influence intracellular MAPK signaling pathways. PMID:19586917