Science.gov

Sample records for academic publishers manufactured

  1. What Does the Academic Publisher Actually Do?

    ERIC Educational Resources Information Center

    Mendel, David

    1991-01-01

    A frustrated author recounts his own experiences and those of others in dealing with publishers. He concludes that academic publishers prefer exchanging ideas and academic gossip with authors to the basics of business, letting the books sell themselves to a captive audience of academic libraries. (MSE)

  2. Publish or Perish: The Myth and Reality of Academic Publishing

    ERIC Educational Resources Information Center

    Lee, Icy

    2014-01-01

    While writing for scholarly publications is considered a crucial dimension of academic work, the "publish-or-perish" system in our field has increasingly caused anxiety and induced stress among not only young academics but also more established scholars. Using my own publishing experience as a point of departure, I challenge the…

  3. ITForum: An Alternative Approach to Academic Publishing.

    ERIC Educational Resources Information Center

    Rieber, Lloyd P.; Wilkinson, Gene L.; Bennett, Lisa T.; Al-Ghafry, Saada

    1998-01-01

    Examines issues involved in academic publishing on the Internet in the context of experiences with the listserv ITForum, which deals with theories, research, new models, and practices in the field of instructional technology. Discusses subscribers and opportunities for authors; developing a research community; and potentials and pitfalls of…

  4. Pay Big to Publish Fast: Academic Journal Rackets

    ERIC Educational Resources Information Center

    Truth, Frank

    2012-01-01

    In the context of open-access (OA) academic publishing, the mounting pressure cross global academe to publish or perish has spawned an exponentially growing number of dodgy academic e-journals charging high fees to authors, often US$300-650, and even triple that amount, promising super-fast processing and publication open-access (OA) online.…

  5. Writing and Publishing for Academic Authors.

    ERIC Educational Resources Information Center

    Moxley, Joseph M., Ed.

    This book of author-contributed chapters on academic writing grew out of workshops on scholarly writing taught at the University of South Florida. The chapters in part I review the working habits of successful academic authors. The chapters in part II analyze the genres of academic writing. Part III focuses on revision and editing of manuscripts.…

  6. Small "p" Publishing: A Networked Blogging Approach to Academic Discourse

    ERIC Educational Resources Information Center

    Martin, Julia W.; Hughes, Brian

    2012-01-01

    This article highlights a middle ground for academic publishing between formal peer-reviewed journals and informal blogging that we call "Small "p" Publishing." Having implemented and tested a publishing network that illustrates this middle ground, we describe its unique contributions to scholars and learning communities. Three features that…

  7. Publishing bioethics and bioethics--reflections on academic publishing by a journal editor.

    PubMed

    Schüklenk, Udo

    2011-02-01

    This article by one of the Editors of Bioethics, published in the 25th anniversary issue of the journal, describes some of the revolutionary changes academic publishing has undergone during the last decades. Many humanities journals went from typically small print-runs, counting by the hundreds, to on-line availability in thousands of university libraries worldwide. Article up-take by our subscribers can be measured efficiently. The implications of this and other changes to academic publishing are discussed. Important ethical challenges need to be addressed in areas such as the enforcement of plagiarism-related policies, the so-called 'impact factor' and its impact on academic integrity, and the question of whether on-line only publishing can currently guarantee the integrity of academic publishing histories.

  8. Participating in International Academic Publishing: A Taiwan Perspective

    ERIC Educational Resources Information Center

    Min, Hui-Tzu

    2014-01-01

    There has been growing concern among researchers and scholars about how nonnative-English-speaking academics in the "expanding circle" (Kachru, 2001, p. 520) cope with challenges while publishing in English in international refereed journals in the center. Most found that academics from peripheral countries where English is a foreign…

  9. Publish or Perish: Academic Life as Management Faculty Live It

    ERIC Educational Resources Information Center

    Miller, Alan N.; Taylor, Shannon G.; Bedeian, Arthur G.

    2011-01-01

    Purpose: Although many in academe have speculated about the effects of pressure to publish on the management discipline--often referred to as "publish or perish"--prevailing knowledge has been based on anecdotal rather than empirical evidence. The aim of the present paper is to shed light on the perceptions of management faculty regarding the…

  10. Planned Merger of 2 Big Journal Publishers Worries Academic Librarians

    ERIC Educational Resources Information Center

    Glenn, David

    2006-01-01

    Last week the venerable publisher John Wiley & Sons made a surprise announcement that it would purchase Blackwell Publishing Ltd. for about $1.13-billion, an acquisition likely to have broad consequences for the world of academic journals and libraries. Assuming that the deal is completed, Wiley's scientific, technical, and medical division will…

  11. Maximizing Accessibility of Academic Publications: Applications of Electronic Publishing Technology

    ERIC Educational Resources Information Center

    Jeffress, Laura; Lyle, Stacey D.

    2012-01-01

    Professors at higher education institutions often feel pressure to "publish or perish" in order to maintain their standing in the academic community, yet a large number of these publications languish in obscure technical journals or are presented only once at a conference or online journal. While these methods achieve the goal of…

  12. Automation in Microforms: An Academic Microform Publisher's Response.

    ERIC Educational Resources Information Center

    Hamilton, Linda K.

    1984-01-01

    Summarizes current status of and concerns about automation in the academic microform publishing industry in two areas: automation of film production (computer-aided design, computer-assisted retrieval, computer-output microfilm) and automation of bibliographic control information (order-management systems, production of printed indexes,…

  13. Academic espionage: dysfunctional aspects of the publish or perish ethic.

    PubMed

    Mensah, L L

    1982-11-01

    There are many dysfunctional manifestations relative to the tenure and promotion process. These are disruptive to academic life. Much of this is encouraged by the university because of their publish or perish ethic. Excellence in classroom teaching and success in the field of clinical and human endeavours are not highly valued in deliberations to grant tenure and advancement in academic rank. Research and publications are the major yardsticks upon which a faculty member is judged. This prevailing perspective poses a dilemma for many nursing faculty who have high clinical workloads and have not been socialized for academic survival. The pressures to publish and research can be achieved in a realistic and non-stressful way. Three aspects seem to be particularly relevant to facilitate this achievement; these are: anticipatory planning, balancing the workload, and understanding the interpersonal dimensions of collegiality. PMID:6924943

  14. The future of academic publishing: what is open access?

    PubMed

    Collins, Jannette

    2005-04-01

    For more than 200 years, publishers have been charging users (i.e., subscribers) for access to scientific information to make a profit. Authors have been required to grant copyright ownership to the publisher. This system was not questioned until the Internet popularized electronic publishing. The Internet allows for rapid dissemination of information to millions of readers. Some people have seen this as an opportunity to revolutionize the system of scientific publishing and to make it one that provides free, open access to all scientific information to all persons everywhere in the world. Such systems have been launched and have instigated a wave of dialogue among proponents and opponents alike. At the center of the controversy is the issue of who will pay for the costs of publishing, because an open-access system is not free, and this threatens the backbone of the traditional publishing industry. Currently, open-access publishers charge authors a fee to have their articles published. Because of this and the uncertainty of the sustainability of the open-access system, some authors are hesitant to participate in the new system. This article reviews the events that led to the creation of open-access publishing, the arguments for and against it, and the implications of open access for the future of academic publishing.

  15. The Glut of Academic Publishing: A Call for a New Culture

    ERIC Educational Resources Information Center

    Trimble, Stanley W.; Grody, Wayne W.; McKelvey, Bill; Gad-el-Hak, Mohamed

    2010-01-01

    Academic publishing has already reached a point where too much material of too little substance is being published, and this trend is continuing. The ostensible reason for academic publishing is to communicate useful information to academic peers. But of all papers published in the "top" scientific journals, only 40.6 percent were cited at least…

  16. PUBLISHING SOUTH AFRICAN SCHOLARSHIP IN THE GLOBAL ACADEMIC COMMUNITY.

    PubMed

    Le Roux, Elizabeth

    2015-09-20

    South Africa's academic publishing history has been profoundly influenced by its colonial heritage. This is reflected in the publication of Transactions of the South African Philosophical Society (later, the Royal Society of South Africa) from 1878. Although the Society and journal sought to promote original research about South Africa, it was modelled after the Royal Society in London and formed part of an imperial scientific community. As the local higher education institutions grew more independent and research-focused, local scholarly publishing developed as well, with university presses playing an increasingly important role. The University of South Africa (Unisa) Press started publishing departmental journals in the 1950s, with a focus on journals that 'speak to the student', and it is today the only South African university press with an active journals publishing programme. As external funding declined and the country became intellectually isolated in the high apartheid period, the Press managed to attract journals that could no longer be subsidized by learned societies and other universities. More recently, new co-publishing arrangements have brought South African journals back into an international intellectual community. Although some argue that this constitutes a re-colonization of South African knowledge production, it is also an innovative strategy for positioning local research in a global context.

  17. PUBLISHING SOUTH AFRICAN SCHOLARSHIP IN THE GLOBAL ACADEMIC COMMUNITY.

    PubMed

    Le Roux, Elizabeth

    2015-09-20

    South Africa's academic publishing history has been profoundly influenced by its colonial heritage. This is reflected in the publication of Transactions of the South African Philosophical Society (later, the Royal Society of South Africa) from 1878. Although the Society and journal sought to promote original research about South Africa, it was modelled after the Royal Society in London and formed part of an imperial scientific community. As the local higher education institutions grew more independent and research-focused, local scholarly publishing developed as well, with university presses playing an increasingly important role. The University of South Africa (Unisa) Press started publishing departmental journals in the 1950s, with a focus on journals that 'speak to the student', and it is today the only South African university press with an active journals publishing programme. As external funding declined and the country became intellectually isolated in the high apartheid period, the Press managed to attract journals that could no longer be subsidized by learned societies and other universities. More recently, new co-publishing arrangements have brought South African journals back into an international intellectual community. Although some argue that this constitutes a re-colonization of South African knowledge production, it is also an innovative strategy for positioning local research in a global context. PMID:26495579

  18. Publishing South African scholarship in the global academic community

    PubMed Central

    le Roux, Elizabeth

    2015-01-01

    South Africa's academic publishing history has been profoundly influenced by its colonial heritage. This is reflected in the publication of Transactions of the South African Philosophical Society (later, the Royal Society of South Africa) from 1878. Although the Society and journal sought to promote original research about South Africa, it was modelled after the Royal Society in London and formed part of an imperial scientific community. As the local higher education institutions grew more independent and research-focused, local scholarly publishing developed as well, with university presses playing an increasingly important role. The University of South Africa (Unisa) Press started publishing departmental journals in the 1950s, with a focus on journals that ‘speak to the student’, and it is today the only South African university press with an active journals publishing programme. As external funding declined and the country became intellectually isolated in the high apartheid period, the Press managed to attract journals that could no longer be subsidized by learned societies and other universities. More recently, new co-publishing arrangements have brought South African journals back into an international intellectual community. Although some argue that this constitutes a re-colonization of South African knowledge production, it is also an innovative strategy for positioning local research in a global context. PMID:26495579

  19. Just Advanced Librarianship: The Role of Academic Libraries as Publishers

    ERIC Educational Resources Information Center

    Harboe-Ree, Cathrine

    2007-01-01

    Digital technologies, combined with library expertise in information management and bibliographic control, access, dissemination and preservation, have provided new opportunities for academic libraries to play a more active role in the publication of scholarly information. Over the past decade a number of Australian academic libraries, drawing on…

  20. Reforms in Academic Publishing: Should "Behavioral Disorders" and Special Education Journals Embrace Them?

    ERIC Educational Resources Information Center

    Cook, Bryan G.

    2016-01-01

    Bias poses a significant threat to the validity of research findings as well as practices and policies based on research. Reforms to academic publishing have been proposed and implemented in other fields to address bias in research. In this paper I review some sources of bias in research, some proposed areas of reform in academic publishing (e.g.,…

  1. Two Worlds of Academic Publishing: Chemistry and German Sociology in Comparison

    ERIC Educational Resources Information Center

    Volkmann, Ute; Schimank, Uwe; Rost, Markus

    2014-01-01

    The communication infrastructure of modern science is provided by profit-oriented business firms: the publishing houses which print and distribute academic books and journals. Surprisingly, beyond some rather superficial impressions, in science studies little is known about how academic publishers work--in particular, how markets for books and…

  2. Publishing Strategies of Young, Highly Mobile Academics: The Question of Language in the European Context

    ERIC Educational Resources Information Center

    Anderson, Laurie

    2013-01-01

    This paper examines links between publishing strategies and the academic mobility of multilingual entry-level scholars in the European context against the backdrop of European Union (EU) policies and research on academic labor market characteristics, skilled migration and scholarly publishing. An analysis of language of publication, patterns of…

  3. The Oligopoly of Academic Publishers in the Digital Era.

    PubMed

    Larivière, Vincent; Haustein, Stefanie; Mongeon, Philippe

    2015-01-01

    The consolidation of the scientific publishing industry has been the topic of much debate within and outside the scientific community, especially in relation to major publishers' high profit margins. However, the share of scientific output published in the journals of these major publishers, as well as its evolution over time and across various disciplines, has not yet been analyzed. This paper provides such analysis, based on 45 million documents indexed in the Web of Science over the period 1973-2013. It shows that in both natural and medical sciences (NMS) and social sciences and humanities (SSH), Reed-Elsevier, Wiley-Blackwell, Springer, and Taylor & Francis increased their share of the published output, especially since the advent of the digital era (mid-1990s). Combined, the top five most prolific publishers account for more than 50% of all papers published in 2013. Disciplines of the social sciences have the highest level of concentration (70% of papers from the top five publishers), while the humanities have remained relatively independent (20% from top five publishers). NMS disciplines are in between, mainly because of the strength of their scientific societies, such as the ACS in chemistry or APS in physics. The paper also examines the migration of journals between small and big publishing houses and explores the effect of publisher change on citation impact. It concludes with a discussion on the economics of scholarly publishing.

  4. The Oligopoly of Academic Publishers in the Digital Era

    PubMed Central

    Larivière, Vincent; Haustein, Stefanie; Mongeon, Philippe

    2015-01-01

    The consolidation of the scientific publishing industry has been the topic of much debate within and outside the scientific community, especially in relation to major publishers’ high profit margins. However, the share of scientific output published in the journals of these major publishers, as well as its evolution over time and across various disciplines, has not yet been analyzed. This paper provides such analysis, based on 45 million documents indexed in the Web of Science over the period 1973-2013. It shows that in both natural and medical sciences (NMS) and social sciences and humanities (SSH), Reed-Elsevier, Wiley-Blackwell, Springer, and Taylor & Francis increased their share of the published output, especially since the advent of the digital era (mid-1990s). Combined, the top five most prolific publishers account for more than 50% of all papers published in 2013. Disciplines of the social sciences have the highest level of concentration (70% of papers from the top five publishers), while the humanities have remained relatively independent (20% from top five publishers). NMS disciplines are in between, mainly because of the strength of their scientific societies, such as the ACS in chemistry or APS in physics. The paper also examines the migration of journals between small and big publishing houses and explores the effect of publisher change on citation impact. It concludes with a discussion on the economics of scholarly publishing. PMID:26061978

  5. PSYCHOLOGY IN FRENCH ACADEMIC PUBLISHING IN THE LATE NINETEENTH CENTURY: ALFRED BINET, EDITORIAL DIRECTOR AT THE SCHLEICHER PUBLISHING HOUSE.

    PubMed

    Nicolas, Serge

    2015-01-01

    To date, historians of psychology have largely ignored the role of academic publishing and the editorial policies of the late nineteenth century. This paper analyzes the role played by academic publishing in the history of psychology in the specific case of France, a country that provides a very interesting and unique model. Up until the middle of the 1890s, there was no collection specifically dedicated to psychology. Alfred Binet was the first to found, in 1897, a collection of works specifically dedicated to scientific psychology. He chose to work with Reinwald-Schleicher. However, Binet was soon confronted with (1) competition from other French publishing houses, and (2) Schleicher's management and editorial problems that were to sound the death knell for Binet's emerging editorial ambitions. The intention of this paper is to encourage the efforts of the pioneers of modern psychology to have their work published and disseminated.

  6. PSYCHOLOGY IN FRENCH ACADEMIC PUBLISHING IN THE LATE NINETEENTH CENTURY: ALFRED BINET, EDITORIAL DIRECTOR AT THE SCHLEICHER PUBLISHING HOUSE.

    PubMed

    Nicolas, Serge

    2015-01-01

    To date, historians of psychology have largely ignored the role of academic publishing and the editorial policies of the late nineteenth century. This paper analyzes the role played by academic publishing in the history of psychology in the specific case of France, a country that provides a very interesting and unique model. Up until the middle of the 1890s, there was no collection specifically dedicated to psychology. Alfred Binet was the first to found, in 1897, a collection of works specifically dedicated to scientific psychology. He chose to work with Reinwald-Schleicher. However, Binet was soon confronted with (1) competition from other French publishing houses, and (2) Schleicher's management and editorial problems that were to sound the death knell for Binet's emerging editorial ambitions. The intention of this paper is to encourage the efforts of the pioneers of modern psychology to have their work published and disseminated. PMID:25975358

  7. Knowledge/Democracy: Notes on the Political Economy of Academic Publishing

    ERIC Educational Resources Information Center

    Biesta, Gert

    2012-01-01

    The question as to who controls academics' knowledge is an important and increasingly urgent question. From the perspective of the good old ivory tower, it does indeed seem that corporate business has gained a high degree of control over the work of academics. The amount of money that is involved in publisher take-over deals not only shows how big…

  8. The Relationship Between Academic Writing Experience and Academic Publishing for Graduate Physics Students

    NASA Astrophysics Data System (ADS)

    Hess, Steven Timothy Michael

    Writing for scientific publication represents an opportunity to interact with colleagues and make a positive contribution to the academic community. However, there is a growing concern regarding the ability of graduate students' to transfer writing skill sets learned at the graduate and undergraduate levels into professional settings. The main research question in this quantitative correlational study explored potential relationships between the publication rates and the number and types of English and composition classes taken by survey participants. Fischerian development, life course theory, and phenomenological sociology framed this study. Participants from private, public, and commercial institutions of higher learning in the United States participated. Data were analyzed using correlational, chi-square, ANOVA, and multiple regression techniques to reveal relationships between the number and types of English and composition classes taken and publication rates. Open-ended questions gathered opinions about scientific writing and writing class experiences and helped triangulate the findings. The results suggested a relationship between publication rates and number of English and composition classes among certain physics specializations and a need for physics institutions to create specialized publishing courses. The results may lead to positive social change by facilitating the examination of writing within particular physics specializations and motivating the creation of departmental constructed writing courses targeting the scientific community responsible for producing technically skilled literate workers. This could enable increased sharing of scientific findings with professional societies.

  9. Electronic Publishing: Research Issues for Academic Librarians and Users.

    ERIC Educational Resources Information Center

    Tenopir, Carol

    2003-01-01

    Addresses the need for further research into three important areas of electronic publishing: how the change to digital information sources is affecting the scholarly work of college and university students; when libraries select electronic journals, how products offered to them or the delivery models they choose influence scholarship and the way…

  10. The Relationship between Academic Writing Experience and Academic Publishing for Graduate Physics Students

    ERIC Educational Resources Information Center

    Hess, Steven Timothy Michael

    2012-01-01

    Writing for scientific publication represents an opportunity to interact with colleagues and make a positive contribution to the academic community. However, there is a growing concern regarding the ability of graduate students' to transfer writing skill sets learned at the graduate and undergraduate levels into professional settings. The main…

  11. Institutional Factors Women Academics Perceive To Be Associated with Their Publishing Productivity.

    ERIC Educational Resources Information Center

    Creamer, Elizabeth G.; Engstrom, Catherine McHugh

    This study examined the attitudes of women academics in the field of education regarding institutional factors that they associate with their publishing productivity. Twenty-three senior-level faculty women in education participated in semi-structured interviews and supplied copies of their curriculum vitae. Of these, 18 qualified as being highly…

  12. Random Drift versus Selection in Academic Vocabulary: An Evolutionary Analysis of Published Keywords

    PubMed Central

    Bentley, R. Alexander

    2008-01-01

    The evolution of vocabulary in academic publishing is characterized via keyword frequencies recorded in the ISI Web of Science citations database. In four distinct case-studies, evolutionary analysis of keyword frequency change through time is compared to a model of random copying used as the null hypothesis, such that selection may be identified against it. The case studies from the physical sciences indicate greater selection in keyword choice than in the social sciences. Similar evolutionary analyses can be applied to a wide range of phenomena; wherever the popularity of multiple items through time has been recorded, as with web searches, or sales of popular music and books, for example. PMID:18728786

  13. Random drift versus selection in academic vocabulary: an evolutionary analysis of published keywords.

    PubMed

    Bentley, R Alexander

    2008-08-27

    The evolution of vocabulary in academic publishing is characterized via keyword frequencies recorded in the ISI Web of Science citations database. In four distinct case-studies, evolutionary analysis of keyword frequency change through time is compared to a model of random copying used as the null hypothesis, such that selection may be identified against it. The case studies from the physical sciences indicate greater selection in keyword choice than in the social sciences. Similar evolutionary analyses can be applied to a wide range of phenomena; wherever the popularity of multiple items through time has been recorded, as with web searches, or sales of popular music and books, for example.

  14. Academic Research and Canadian Manufacturing Productivity since the Formation of NAFTA

    ERIC Educational Resources Information Center

    Brox, James

    2007-01-01

    Does academic research have a positive impact on productivity? To examine this question, the paper focuses on national Canadian manufacturing data, using a variable-cost CES-translog cost system. Changes in the elasticities calculated from the estimation results allow the study of the impact of the free-trade agreements on Canadian production and…

  15. An academic, clinical and industrial update on electrospun, additive manufactured and imprinted medical devices.

    PubMed

    Ryan, Christina N M; Fuller, Kieran P; Larrañaga, Aitor; Biggs, Manus; Bayon, Yves; Sarasua, Jose R; Pandit, Abhay; Zeugolis, Dimitrios I

    2015-01-01

    Electrospinning, additive manufacturing and imprint lithography scaffold fabrication technologies have attracted great attention in biomedicine, as they allow production of two- and three- dimensional constructs with tuneable topographical and geometrical features. In vitro data demonstrate that electrospun and imprinted substrates offer control over permanently differentiated and stem cell function. Advancements in functionalisation strategies have further enhanced the bioactivity and reparative capacity of electrospun and additive manufactured devices, as has been evidenced in several preclinical models. Despite this overwhelming success in academic setting, only a few technologies have reached the clinic and only a fraction of them have become commercially available products.

  16. Roles of publishers, subscription agents, and institutional subscribers in the academic journal business : Opinions after reading the “Series: Perspectives on serials crisis and scholarly communication practice”

    NASA Astrophysics Data System (ADS)

    Taguchi, Nobuyuki

    Roles of publishers, subscription agents, and institutional subscribers in the academic journal business : Opinions after reading the “Series: Perspectives on serials crisis and scholarly communication practice”

  17. Industrial & Engineering Systems Career Cluster ITAC for Career-Focused Education: Manufacturing Sub-Cluster. Integrated Technical & Academic Competencies.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Designed for Ohio educators responsible for planning programs to prepare high school students for careers in the manufacturing industry, this document presents an overview of Ohio's Integrated Technical and Academic Competencies (ITAC) system of career-focused education and specific information about the manufacturing subcluster of the industrial…

  18. Reviews, Holdings, and Presses and Publishers in Academic Library Book Acquisitions.

    ERIC Educational Resources Information Center

    Calhoun, John C.

    2001-01-01

    Discussion of academic library book acquisition reviews pertinent literature on book reviews, book selection, and evaluation and proposes a model for academic library book acquisition using a two-year relational database file of approval plan records. Defines a core collection for the California State University system, and characterizes…

  19. Articulate--Academic Writing, Refereeing Editing and Publishing Our Work in Learning, Teaching and Educational Development

    ERIC Educational Resources Information Center

    Wisker, Gina

    2013-01-01

    Most work on writing and publication processes focuses on writing support for undergraduates or postgraduates writing in the disciplines, while work on academic identities frequently considers development as a university teacher. This essay consider the reviewing process for academics who write, whether doctoral students, researchers, teachers or…

  20. Manufacture of braided fabrics. (Latest citations from World Textile Abstracts). Published Search

    SciTech Connect

    Not Available

    1993-01-01

    The bibliography contains citations concerning the manufacture of braided goods. The citations examine braiding techniques and machines, including bobbin and bobbin carrier assemblies; fiber and fabrics; and the properties and end uses of braided fabrics. Machine noise emmision and noise reduction are also presented. Patents are included. (Contains a minimum of 215 citations and includes a subject term index and title list.)

  1. Focus on Academic and Research Libraries: Librarians Speak Out to Journal Publishers

    ERIC Educational Resources Information Center

    Kaser, Dick

    2009-01-01

    What is the economic situation in libraries these days? What are academic and research libraries doing with regard to making the resources in their collections more discoverable? Are they involved in institutional repository (IR) projects? And how do IRs and the availability of open access journals affect library purchasing decisions? Those were…

  2. Part I: Advancing the Conversation. Just Scholarship! Publishing Academic Research with a Social Justice Focus

    ERIC Educational Resources Information Center

    Salazar, Maria del Carmen; Rios, Francisco

    2016-01-01

    This article provides support to academics who are committed to engaging in scholarly activities in ways that promote an explicit social justice focus. Moreover, this article provides a broad overview of how to pursue social justice purposes in the field of education throughout the process of scholarly production and dissemination.

  3. Peer Review in Academic Promotion and Publishing: Its Meaning, Locus, and Future

    ERIC Educational Resources Information Center

    Harley, Diane; Acord, Sophia Krzys; Earl-Novell, Sarah

    2010-01-01

    As part of its Andrew W. Mellon Foundation-funded Future of Scholarly Communication Project, the Center for Studies in Higher Education (CSHE) has hosted two meetings to explore how peer review relates to scholarly communication and academic values. In preparation for an April 2010 workshop, four working papers were developed and circulated. They…

  4. The Book Publishing and Manufacturing Industry in Canada; A Statistical and Economic Analysis.

    ERIC Educational Resources Information Center

    Ernst and Ernst, Montreal (Quebec).

    The fundamental objective of the study is to obtain a detailed analysis of the book publishing industry and the book printing industry in Canada, in order to determine what steps the Federal Government might take to assist the industry in improving its viability and in promoting its stability and growth. This objective implies that the study will…

  5. Getting published in an academic-community hospital: the success of writing groups.

    PubMed

    Salas-Lopez, Debbie; Deitrick, Lynn; Mahady, Erica T; Moser, Kathleen; Gertner, Eric J; Sabino, Judith N

    2012-01-01

    Expressed barriers to writing for publication include lack of time, competing demands, anxiety about writing and a lack of knowledge about the submission process. These limitations can be magnified for practitioners in non-university environments in which there are fewer incentives or expectations regarding academic publication productivity. However, as members of professional disciplines, practitioners have both the responsibility and, oftentimes, the insights to make valuable contributions to the professional literature. Collaborative writing groups can be a useful intervention to overcome barriers, provide the necessary skills and encouragement as well as produce publications and conference presentations that make worthy additions to the professional body of knowledge. This article discusses the evolution and outcomes of writing groups at Lehigh Valley Health Network and describes how this strategy can be adopted by other academic community hospitals to promote professional development and publication. PMID:21922155

  6. China's postgraduate education practices and its academic impact on publishing: is it proportional?

    PubMed

    Zhu, Yuan; Zhang, Chun-jie; Hu, Cheng-liang

    2014-12-01

    Though postgraduate education started before the founding of new China in 1949, it was not until the implementation of the policy reform and the opening-up in 1978 that China's postgraduate productivity began to take off. Since the introduction of Regulations of the People's Republic of China on Academic Degrees in 1981, the number of graduate students enrolled each year has increased 50 times since 1978. China is now the second largest producer of publications indexed by the database of Science Citation Index (SCI) (Web of Science™, Thomson Reuters), which reflects great strides being made in the postgraduate education. In this paper, we discuss the relationship between the increasingly high enrollments of graduate students and the quantity (the number) and quality (the academic impact and the originality) of their publications, to see whether there is a correlation.

  7. Getting published in an academic-community hospital: the success of writing groups.

    PubMed

    Salas-Lopez, Debbie; Deitrick, Lynn; Mahady, Erica T; Moser, Kathleen; Gertner, Eric J; Sabino, Judith N

    2012-01-01

    Expressed barriers to writing for publication include lack of time, competing demands, anxiety about writing and a lack of knowledge about the submission process. These limitations can be magnified for practitioners in non-university environments in which there are fewer incentives or expectations regarding academic publication productivity. However, as members of professional disciplines, practitioners have both the responsibility and, oftentimes, the insights to make valuable contributions to the professional literature. Collaborative writing groups can be a useful intervention to overcome barriers, provide the necessary skills and encouragement as well as produce publications and conference presentations that make worthy additions to the professional body of knowledge. This article discusses the evolution and outcomes of writing groups at Lehigh Valley Health Network and describes how this strategy can be adopted by other academic community hospitals to promote professional development and publication.

  8. Self-plagiarism in academic publishing: the anatomy of a misnomer.

    PubMed

    Andreescu, Liviu

    2013-09-01

    The paper discusses self-plagiarism and associated practices in scholarly publishing. It approaches at some length the conceptual issues raised by the notion of self-plagiarism. It distinguishes among and then examines the main families of arguments against self-plagiarism, as well as the question of possibly legitimate reasons to engage in this practice. It concludes that some of the animus frequently reserved for self-plagiarism may be the result of, among others, poor choice of a label, unwarranted generalizations as to its ill effects based on the specific experience (and goals) of particular disciplines, and widespread but not necessarily beneficial publishing practices.

  9. Self-plagiarism in academic publishing: the anatomy of a misnomer.

    PubMed

    Andreescu, Liviu

    2013-09-01

    The paper discusses self-plagiarism and associated practices in scholarly publishing. It approaches at some length the conceptual issues raised by the notion of self-plagiarism. It distinguishes among and then examines the main families of arguments against self-plagiarism, as well as the question of possibly legitimate reasons to engage in this practice. It concludes that some of the animus frequently reserved for self-plagiarism may be the result of, among others, poor choice of a label, unwarranted generalizations as to its ill effects based on the specific experience (and goals) of particular disciplines, and widespread but not necessarily beneficial publishing practices. PMID:23179068

  10. Open access: academic publishing and its implications for knowledge equity in Kenya.

    PubMed

    Matheka, Duncan Mwangangi; Nderitu, Joseph; Mutonga, Daniel; Otiti, Mary Iwaret; Siegel, Karen; Demaio, Alessandro Rhyll

    2014-01-01

    Traditional, subscription-based scientific publishing has its limitations: often, articles are inaccessible to the majority of researchers in low- and middle-income countries (LMICs), where journal subscriptions or one-time access fees are cost-prohibitive. Open access (OA) publishing, in which journals provide online access to articles free of charge, breaks this barrier and allows unrestricted access to scientific and scholarly information to researchers all over the globe. At the same time, one major limitation to OA is a high publishing cost that is placed on authors. Following recent developments to OA publishing policies in the UK and even LMICs, this article highlights the current status and future challenges of OA in Africa. We place particular emphasis on Kenya, where multidisciplinary efforts to improve access have been established. We note that these efforts in Kenya can be further strengthened and potentially replicated in other African countries, with the goal of elevating the visibility of African research and improving access for African researchers to global research, and, ultimately, bring social and economic benefits to the region. We (1) offer recommendations for overcoming the challenges of implementing OA in Africa and (2) call for urgent action by African governments to follow the suit of high-income countries like the UK and Australia, mandating OA for publicly-funded research in their region and supporting future research into how OA might bring social and economic benefits to Africa. PMID:24716579

  11. Open access: academic publishing and its implications for knowledge equity in Kenya

    PubMed Central

    2014-01-01

    Traditional, subscription-based scientific publishing has its limitations: often, articles are inaccessible to the majority of researchers in low- and middle-income countries (LMICs), where journal subscriptions or one-time access fees are cost-prohibitive. Open access (OA) publishing, in which journals provide online access to articles free of charge, breaks this barrier and allows unrestricted access to scientific and scholarly information to researchers all over the globe. At the same time, one major limitation to OA is a high publishing cost that is placed on authors. Following recent developments to OA publishing policies in the UK and even LMICs, this article highlights the current status and future challenges of OA in Africa. We place particular emphasis on Kenya, where multidisciplinary efforts to improve access have been established. We note that these efforts in Kenya can be further strengthened and potentially replicated in other African countries, with the goal of elevating the visibility of African research and improving access for African researchers to global research, and, ultimately, bring social and economic benefits to the region. We (1) offer recommendations for overcoming the challenges of implementing OA in Africa and (2) call for urgent action by African governments to follow the suit of high-income countries like the UK and Australia, mandating OA for publicly-funded research in their region and supporting future research into how OA might bring social and economic benefits to Africa. PMID:24716579

  12. Cataloging the Publications of Dark Horse Comics: One Publisher in an Academic Catalog

    ERIC Educational Resources Information Center

    Markham, Gary W.

    2009-01-01

    Libraries receiving the corpus of a comics publisher are presented with challenges, especially regarding preservation and access for special and circulating collections. Libraries must consider user research needs and collection relevance. Library literature is consulted and recommendations are made regarding bibliographic description, subject…

  13. "Good Books": Is There a Future for Academic Writing within the Educational Publishing Industry?

    ERIC Educational Resources Information Center

    Nixon, Jon; Wellington, Jerry

    2005-01-01

    This paper draws on questionnaire responses received (via e-mail) during the period 2002-2003 from senior commissioning editors located within seven of the major UK publishing outlets. Drawing on the analytical framework of an earlier study by Nixon (1999), it focuses on the mediation of educational studies by market forces operating within and…

  14. Content Analysis of International Research in Geographical and Environmental Education: 18 Years of Academic Publishing

    ERIC Educational Resources Information Center

    Kidman, Gillian; Papadimitriou, Fivos

    2012-01-01

    This paper examines the history of the "International Research in Geographical and Environmental Education" (IRGEE) journal in terms of its sustainable future. The development of geographical and environmental education is evaluated, as reflected from the papers published in the journal "IRGEE". A content analysis of all papers and forum sections…

  15. Impacts of Academic R&D on High-Tech Manufacturing Products: Tentative Evidence from Supercomputer Data

    ERIC Educational Resources Information Center

    Le, Thanh; Tang, Kam Ki

    2015-01-01

    This paper empirically examines the impact of academic research on high-tech manufacturing growth of 28 Organisation for Economic Co-operation and Development (OECD) and emerging countries over the 1991-2005 period. A standard research and development (R&D) expenditure based measure is found to be too general to capture the input in high-tech…

  16. Academic Debate: Publications Which Promote Political Agendas Have no Place in Scientific and Medical Journals, and Academics Should Refrain from Publishing in Such Journals.

    PubMed

    Glick, Shimon; Clarfield, A Mark; Strous, Rael D; Horton, Richard

    2015-01-01

    This paper presents the full debate held on October 1, 2014, which focused on the following resolution: "Publications which promote political agendas have no place in scientific and medical journals, and academics should refrain from publishing in such journals." The debate moderator was Professor Shimon Glick. Taking the pro stance was Professor A. Mark Clarfield; the con stance was held by Professor Rael D. Strous. Following the first part of the debate, Dr Richard Horton, Editor-in-Chief of The Lancet, gave his thoughts on the topic. This was followed by the opportunity for rebuttal by Professors Clarfield and Strous. The debate was summarized and closed by Professor Glick. This paper provides a slightly edited text of the debate, for ease of reading.

  17. Academic Debate: Publications Which Promote Political Agendas Have no Place in Scientific and Medical Journals, and Academics Should Refrain from Publishing in Such Journals

    PubMed Central

    Glick, Shimon; Clarfield, A. Mark; Strous, Rael D.; Horton, Richard

    2015-01-01

    This paper presents the full debate held on October 1, 2014, which focused on the following resolution: “Publications which promote political agendas have no place in scientific and medical journals, and academics should refrain from publishing in such journals.” The debate moderator was Professor Shimon Glick. Taking the pro stance was Professor A. Mark Clarfield; the con stance was held by Professor Rael D. Strous. Following the first part of the debate, Dr Richard Horton, Editor-in-Chief of The Lancet, gave his thoughts on the topic. This was followed by the opportunity for rebuttal by Professors Clarfield and Strous. The debate was summarized and closed by Professor Glick. This paper provides a slightly edited text of the debate, for ease of reading. PMID:25717385

  18. Misconduct Policies, Academic Culture and Career Stage, Not Gender or Pressures to Publish, Affect Scientific Integrity

    PubMed Central

    Fanelli, Daniele; Costas, Rodrigo; Larivière, Vincent

    2015-01-01

    The honesty and integrity of scientists is widely believed to be threatened by pressures to publish, unsupportive research environments, and other structural, sociological and psychological factors. Belief in the importance of these factors has inspired major policy initiatives, but evidence to support them is either non-existent or derived from self-reports and other sources that have known limitations. We used a retrospective study design to verify whether risk factors for scientific misconduct could predict the occurrence of retractions, which are usually the consequence of research misconduct, or corrections, which are honest rectifications of minor mistakes. Bibliographic and personal information were collected on all co-authors of papers that have been retracted or corrected in 2010-2011 (N=611 and N=2226 papers, respectively) and authors of control papers matched by journal and issue (N=1181 and N=4285 papers, respectively), and were analysed with conditional logistic regression. Results, which avoided several limitations of past studies and are robust to different sampling strategies, support the notion that scientific misconduct is more likely in countries that lack research integrity policies, in countries where individual publication performance is rewarded with cash, in cultures and situations were mutual criticism is hampered, and in the earliest phases of a researcher’s career. The hypothesis that males might be prone to scientific misconduct was not supported, and the widespread belief that pressures to publish are a major driver of misconduct was largely contradicted: high-impact and productive researchers, and those working in countries in which pressures to publish are believed to be higher, are less-likely to produce retracted papers, and more likely to correct them. Efforts to reduce and prevent misconduct, therefore, might be most effective if focused on promoting research integrity policies, improving mentoring and training, and encouraging

  19. Misconduct Policies, Academic Culture and Career Stage, Not Gender or Pressures to Publish, Affect Scientific Integrity.

    PubMed

    Fanelli, Daniele; Costas, Rodrigo; Larivière, Vincent

    2015-01-01

    The honesty and integrity of scientists is widely believed to be threatened by pressures to publish, unsupportive research environments, and other structural, sociological and psychological factors. Belief in the importance of these factors has inspired major policy initiatives, but evidence to support them is either non-existent or derived from self-reports and other sources that have known limitations. We used a retrospective study design to verify whether risk factors for scientific misconduct could predict the occurrence of retractions, which are usually the consequence of research misconduct, or corrections, which are honest rectifications of minor mistakes. Bibliographic and personal information were collected on all co-authors of papers that have been retracted or corrected in 2010-2011 (N=611 and N=2226 papers, respectively) and authors of control papers matched by journal and issue (N=1181 and N=4285 papers, respectively), and were analysed with conditional logistic regression. Results, which avoided several limitations of past studies and are robust to different sampling strategies, support the notion that scientific misconduct is more likely in countries that lack research integrity policies, in countries where individual publication performance is rewarded with cash, in cultures and situations were mutual criticism is hampered, and in the earliest phases of a researcher's career. The hypothesis that males might be prone to scientific misconduct was not supported, and the widespread belief that pressures to publish are a major driver of misconduct was largely contradicted: high-impact and productive researchers, and those working in countries in which pressures to publish are believed to be higher, are less-likely to produce retracted papers, and more likely to correct them. Efforts to reduce and prevent misconduct, therefore, might be most effective if focused on promoting research integrity policies, improving mentoring and training, and encouraging

  20. The Rules of the Game: A Short Guide for PhD Students and New Academics on Publishing in Academic Journals

    ERIC Educational Resources Information Center

    Wilkinson, Adrian

    2015-01-01

    In recent times "publish or perish" has become the motto of academia. This paper provides some basic insights into the process of publishing, the view from the perspective of the editor of the journal and gives helpful hints to improve the odds of getting published in the right journal and communicating with the right audience. The need…

  1. Guayule rubber: Cultivation and manufacture. (Latest citations from the Rubber and Plastics Rsearch Association database). Published Search

    SciTech Connect

    Not Available

    1994-06-01

    The bibliography contains citations concerning research and development of guayule as a natural rubber source. Cultivation methods and locations, physical and chemical properties, economic factors of cultivation through manufacture, production forecasts, effects of mixing with synthetic rubbers, and vulcanization are among the topics discussed. Industrial health hazards, performance in the world market, and applications are considered. (Contains a minimum of 206 citations and includes a subject term index and title list.)

  2. Embracing Electronic Publishing.

    ERIC Educational Resources Information Center

    Wills, Gordon

    1996-01-01

    Electronic publishing is the grandest revolution in the capture and dissemination of academic and professional knowledge since Caxton developed the printing press. This article examines electronic publishing, describes different electronic publishing scenarios (authors' cooperative, consolidator/retailer/agent oligopsony, publisher oligopoly), and…

  3. Astronomy Research in IUCAA: A Scientometric Study of the Papers Published by IUCAA Academics during 1993-2013

    NASA Astrophysics Data System (ADS)

    Rai, V. K.; Senger, K. P. S.

    2015-04-01

    The study analyses the publication output of Inter-University Centre for Astronomy and Astrophysics during 1993-2013 and assess how Astronomy and Astrophysics research at IUCAA has progressed over that time. The publication output has been analyzed using quantitative and qualitative indicators, such as the number of papers published in journals and proceedings during the periods 1993-94 to 2012-13, an examination and analysis of authorship patterns, and citations received per paper. It identifies the prolific authors that have large number of publications and citations, and the highly productive authors of the institute. Data collected from the institute annual reports and output was analyzed with the help of Astrophysical Data System.

  4. Why Aren't E-Books Gaining More Ground in Academic Libraries? E-Book Use and Perceptions: A Review of Published Literature and Research

    ERIC Educational Resources Information Center

    Slater, Robert

    2010-01-01

    E-books have yet to assume a significant place in academic library collections. This article focuses on extracting common themes from the literature that might help the reader better understand why e-books have not yet become the cornerstone of the academic library. Patrons do not use e-books because they find the experience of using e-books…

  5. Using Delphi Surveying Techniques to Gather Input from Non-Academics for Development of a Modern Dairy Manufacturing Curriculum

    ERIC Educational Resources Information Center

    Joyner, Helen S.; Smith, Denise

    2015-01-01

    The current face of the dairy manufacturing industry has changed from its traditional conception. Industry emphasis is moving away from traditional dairy products, such as fluid milk, ice cream, and butter, and moving toward yogurts, dairy beverages, and value-added products incorporating ingredients derived from milk and whey. However, many…

  6. Publishing and Academic Writing: Experiences of Authors Who Have Published in "PROFILE" (Publicación y escritura académica: experiencias de autores que han publicado en "PROFILE")

    ERIC Educational Resources Information Center

    Cárdenas, Melba L.

    2014-01-01

    The increase in the publication of academic journals is closely related to the growing interest of research communities as well as of institutional policies that demand visibility of the work done by their staff through publications in highly-ranked journals. The purpose of this paper is to portray the experiences of some authors who published…

  7. Manufacturing technology

    SciTech Connect

    Blaedel, K.L.

    1997-02-01

    The specific goals of the Manufacturing Technology thrust area are to develop an understanding of fundamental fabrication processes, to construct general purpose process models that will have wide applicability, to document our findings and models in journals, to transfer technology to LLNL programs, industry, and colleagues, and to develop continuing relationships with industrial and academic communities to advance our collective understanding of fabrication processes. Advances in four projects are described here, namely Design of a Precision Saw for Manufacturing, Deposition of Boron Nitride Films via PVD, Manufacturing and Coating by Kinetic Energy Metallization, and Magnet Design and Application.

  8. The Economics of Publishing and the Publishing of Economics.

    ERIC Educational Resources Information Center

    La Manna, Manfredi

    2003-01-01

    Explores the relationship between economics and scientific journal publishing. Topics include journal pricing in economics; market power exerted by the dominant commercial publisher in economics journal publishing; academic experiments to improve scholarly communication in economics; policies of the United Kingdom Competition Commission; and…

  9. Love's Labour's Lost: Latino Publishing.

    ERIC Educational Resources Information Center

    Figueredo, Danilo H.

    1998-01-01

    Reviews the history of publishing of Latino literature and journals in the U.S. Nineteenth-century Latino publishing in different geographical regions is examined and the impact of social changes on 20th-century writing is discussed. Bilingual publishing and the role of academic presses are highlighted. (MMU)

  10. Philadelphia Printing and Publishing, 1876-1976

    ERIC Educational Resources Information Center

    Whitehead, Thomas M.

    1976-01-01

    Two Philadelphia printing histories, both reflecting the relationship of printing to publishing, are examined in this article: the manufacture by the publisher of his own product and the development and commercialization of the photomechanical halftone process. (Author)

  11. 75 FR 80040 - Manufacturing Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-21

    ... International Trade Administration Manufacturing Council AGENCY: International Trade Administration, U.S... Manufacturing Council. SUMMARY: On November 23, 2010, the Department of Commerce's International Trade Administration published a notice in the Federal Register (75 FR 71417) soliciting applications to fill...

  12. 75 FR 30781 - Manufacturing Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-02

    ... International Trade Administration Manufacturing Council AGENCY: International Trade Administration, U.S... Manufacturing Council. SUMMARY: On March 16, 2010, the Department of Commerce's International Trade Administration published a notice in the Federal Register (75 FR 12507) soliciting applications for membership...

  13. 77 FR 69794 - Manufacturing Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-21

    ... International Trade Administration Manufacturing Council AGENCY: International Trade Administration, U.S... Manufacturing Council. SUMMARY: On September 14, 2012, the Department of Commerce's International Trade Administration (ITA) published a notice in the Federal Register (77 FR 56811) soliciting applications...

  14. 77 FR 66179 - Manufacturing Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-02

    ... International Trade Administration Manufacturing Council AGENCY: International Trade Administration, U.S... manufacturing council. SUMMARY: On September 14, 2012, the Department of Commerce's International Trade Administration published a notice in the Federal Register (77 FR 56811) soliciting applications for...

  15. Web Database Development: Implications for Academic Publishing.

    ERIC Educational Resources Information Center

    Fernekes, Bob

    This paper discusses the preliminary planning, design, and development of a pilot project to create an Internet accessible database and search tool for locating and distributing company data and scholarly work. Team members established four project objectives: (1) to develop a Web accessible database and decision tool that creates Web pages on the…

  16. Why publish?

    PubMed

    Waugaman, W R

    1991-10-01

    The following article encourages student nurse anesthetists to publish knowledge learned from clinical and educational experiences; however, the same philosophy and advice applies to all nurse anesthetists. Dr. Waugaman presented the information in this article to more than 700 students who attended a Student Luncheon on August 6. The luncheon was among many special activities held for students during the 58th AANA Annual Meeting in Nashville, August 3-8, 1991. For more information on submitting manuscripts to the AANA Journal, please refer to "Information for Authors," published in each issue of the AANA Journal, and the February 1991 article titled "A style change for the AANA Journal," authored by Michael A. Fiedler, CRNA, MS, and E. Jane McCarthy, CRNA, PhD.

  17. Trade Publishing: A Report from the Front.

    ERIC Educational Resources Information Center

    Fister, Barbara

    2001-01-01

    Reports on the current condition of trade publishing and its future prospects based on interviews with editors, publishers, agents, and others. Discusses academic libraries and the future of trade publishing, including questions relating to electronic books, intellectual property, and social and economic benefits of sharing information…

  18. Publishers' Note

    NASA Astrophysics Data System (ADS)

    EPL Management Team

    2008-12-01

    We would like to thank all our contributors, subscribers, reviewers, and readers for their interest in EPL during 2008. You each play an invaluable role in the promotion, prestige, development and success of the journal and therefore your continued support is greatly appreciated. The Directors' vision for EPL to become a leading home for global physics letters, to offer rapid publication of ground-breaking physics results from the international community, and to provide the broadest coverage of physics research, is beginning to take shape as increased submissions, reduced acceptance rates, raised scientific quality, rapid publication, and greater visibility amongst the community are achieved. The latest published articles will continue to be freely available for 30 days from their on-line publication. Those articles highlighted by the Co-Editors in 2008 will remain free-to-all for the entire of 2009. We invite you to visit the website regularly (http://www.epljournal.org) to stay up-to-date with the journal's latest developments and to read the most recent articles. Our most recent opportunity publicized on the EPL website and in the CERN SCOAP3 (Sponsoring Consortium for Open Access Publishing in Particle Physics) messages is below: Open Access Opportunity for Authors of Experimental and Theoretical HEP Articles EPL is delighted to offer open access free of charge to all authors submitting experimental and theoretical letters in PACS codes 10 and 20. This offer will remain open until the SCOAP3 agreement at CERN takes effect. Authors submitting any article to EPL will continue to be offered the opportunity to make their published letter open access for a one-off payment. However, with effect from 1 November 2008, any author who submits work related to subject areas within PACS 10 and 20 will benefit from open access at no charge, meaning their published article will be available free to all readers, forever. ``Physics of Elementary Particles and Fields'' and

  19. Publisher's Announcement

    NASA Astrophysics Data System (ADS)

    Scriven, Neil

    2003-12-01

    We are delighted to announce that the new Editor-in-Chief of Journal of Physics A: Mathematical and General for 2004 will be Professor Carl M Bender of Washington University, St. Louis. Carl will, with the help of his world class editorial board, maintain standards of scientific rigour whilst ensuring that research published is of the highest importance. Carl attained his first degree in physics at Cornell University before studying for his PhD at Harvard. He later worked at The Institute for Advanced Study in Princeton and at MIT before assuming his current position at Washington University, St Louis. He has been a visiting professor at Technion, Haifa, and Imperial College, London and a scientific consultant for Los Alamos National Laboratory. His main expertise is in using classical applied mathematics to solve a broad range of problems in high-energy theoretical physics and mathematical physics. Since the publication of his book Advanced Mathematical Methods for Scientists and Engineers, written with Steven Orszag, he has been regarded as an expert on the subject of asymptotic analysis and perturbative methods. `Carl publishes his own internationally-important research in the journal and has been an invaluable, energetic member of the Editorial Board for some time' said Professor Ed Corrigan, Carl's predecessor as Editor, `he will be an excellent Editor-in-Chief'. Our grateful thanks and best wishes go to Professor Corrigan who has done a magnificent job for the journal during his five-year tenure.

  20. The Future of Scholarly Publishing

    ERIC Educational Resources Information Center

    Chronicle of Higher Education, 2009

    2009-01-01

    In these times of financial crisis, much of the discussion about scholarly publishing has focused on budgets, the switch to electronic formats, and the future of the monograph. Throughout, however, university presses have continued to bring out important scholarship that is the mainstay of academe. "The Chronicle Review" asked a group of editors…

  1. Corporate Mergers in the Publishing Industry: Helpful or Intrusive?

    ERIC Educational Resources Information Center

    Rudman, Herbert C.

    1990-01-01

    Examines the effects of corporate mergers in the publishing industry on the publishing of textbooks and standardized tests. Concludes that restructuring, acquisitions, and mergers have an intrusive effect on established practices of academic publishing and may severely limit the access of scholars to the academic marketplace. (FMW)

  2. Manufacturing technology

    SciTech Connect

    Blaedel, K L

    1998-01-01

    The mission of the Manufacturing Technology thrust area at Lawrence Livermore National Laboratory (LLNL) has been to have an adequate base of manufacturing technology, not necessarily resident at LLNL, to conduct their future business. The specific goals were (1) to develop an understanding of fundamental fabrication processes; (2) to construct general purpose process models that have wide applicability; (3) to document their findings and models in journals; (4) to transfer technology to LLNL programs, industry, and colleagues; and (5) to develop continuing relationships with the industrial and academic communities to advance their collective understanding of fabrication processes. In support of this mission, two projects were reported here, each of which explores a way to bring higher precision to the manufacturing challenges that we face over the next few years. The first, ''A Spatial-Frequency-Domain Approach to Designing a Precision Machine Tools,'' is an overall view of how they design machine tools and instruments to make or measure workpieces that are specified in terms of the spatial frequency content of the residual errors of the workpiece surface. This represents an improvement of an ''error budget,'' a design tool that saw significant development in the early 1980's, and has been in active use since then. The second project, ''Micro-Drilling of ICF Capsules,'' is an attempt to define the current state in commercial industry for drilling small holes, particularly laser-drilling. The report concludes that 1-{micro}m diameter holes cannot currently be drilled to high aspect ratios, and then defines the engineering challenges that will have to be overcome to machine holes small enough for NIF capsules.

  3. 78 FR 49546 - Manufacturer of Controlled Substances; Notice of Application; IRIX Manufacturing, Inc.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-14

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; IRIX Manufacturing... that on January 18, 2013, IRIX Manufacturing, Inc., 309 Delaware Street, Greenville, South...

  4. Open Access Publishing: What Authors Want

    ERIC Educational Resources Information Center

    Nariani, Rajiv; Fernandez, Leila

    2012-01-01

    Campus-based open access author funds are being considered by many academic libraries as a way to support authors publishing in open access journals. Article processing fees for open access have been introduced recently by publishers and have not yet been widely accepted by authors. Few studies have surveyed authors on their reasons for publishing…

  5. Publish, Don't Perish: Ten Tips

    ERIC Educational Resources Information Center

    Carter, Katherine; Aulette, Judy

    2016-01-01

    Going public with research is an important part of the research process. Besides the intrinsic value of sharing experience and insights with a community of peers, in higher education, publishing is vital for job security and promotion. Despite these forces encouraging publishing, few academics actually do. The purpose of this article is to provide…

  6. Manufacturing Success

    ERIC Educational Resources Information Center

    Reese, Susan

    2007-01-01

    According to the National Association of Manufacturers (NAM), "manufacturing is the engine that drives American prosperity". When NAM and its research and education arm, The Manufacturing Institute, released the handbook, "The Facts About Modern Manufacturing," in October 2006, NAM President John Engler noted, that manufacturing output in America…

  7. Dangerous Predatory Publishers Threaten Medical Research.

    PubMed

    Beall, Jeffrey

    2016-10-01

    This article introduces predatory publishers in the context of biomedical sciences research. It describes the characteristics of predatory publishers, including spamming and using fake metrics, and it describes the problems they cause for science and universities. Predatory journals often fail to properly manage peer review, allowing pseudo-science to be published dressed up as authentic science. Academic evaluation is also affected, as some researchers take advantage of the quick, easy, and cheap publishing predatory journals provide. By understanding how predatory publishers operate, researchers can avoid becoming victimized by them. PMID:27550476

  8. Dangerous Predatory Publishers Threaten Medical Research

    PubMed Central

    2016-01-01

    This article introduces predatory publishers in the context of biomedical sciences research. It describes the characteristics of predatory publishers, including spamming and using fake metrics, and it describes the problems they cause for science and universities. Predatory journals often fail to properly manage peer review, allowing pseudo-science to be published dressed up as authentic science. Academic evaluation is also affected, as some researchers take advantage of the quick, easy, and cheap publishing predatory journals provide. By understanding how predatory publishers operate, researchers can avoid becoming victimized by them. PMID:27550476

  9. Academic Blogging: Academic Practice and Academic Identity

    ERIC Educational Resources Information Center

    Kirkup, Gill

    2010-01-01

    This paper describes a small-scale study which investigates the role of blogging in professional academic practice in higher education. It draws on interviews with a sample of academics (scholars, researchers and teachers) who have blogs and on the author's own reflections on blogging to investigate the function of blogging in academic practice…

  10. Academic Hospitality

    ERIC Educational Resources Information Center

    Phipps, Alison; Barnett, Ronald

    2007-01-01

    Academic hospitality is a feature of academic life. It takes many forms. It takes material form in the hosting of academics giving papers. It takes epistemological form in the welcome of new ideas. It takes linguistic form in the translation of academic work into other languages, and it takes touristic form through the welcome and generosity with…

  11. 75 FR 44286 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-28

    ... 5, 2010, and published in the Federal Register on March 19, 2010, (75 FR 13304), Halo Pharmaceutical... company plans to manufacture Hydromorphone HCL for sale to other manufacturers and for the manufacture...

  12. Women in Academic Medicine.

    PubMed

    Thibault, George E

    2016-08-01

    More than a decade ago, women achieved parity with men in the number of matriculants to medical school, nearly one-third of the faculty of medical schools were women, and there were some women deans and department chairs. These trends were promising, but today there are still significant differences in pay, academic rank, and leadership positions for women compared with men in academic medicine. Though there has been progress in many areas, the progress is too slow to achieve previously recommended goals, such as 50% women department chairs by 2025 and 50% women deans by 2030.The author points to the findings presented in the articles from the Research Partnership on Women in Biomedical Careers in this issue, as well as research being published elsewhere, as an evidence base for the ongoing discussion of gender equity in academic medicine. More attention to culture and the working environment will be needed to achieve true parity for women in academic medical careers.

  13. Reviewing Academic Books: Are There Ethical Issues?

    ERIC Educational Resources Information Center

    Byrne, Edmund F.

    2002-01-01

    Discusses bias in academic book reviewing due to the hierarchy of perceived excellence promoted by the academic and publishing industries and that favors authors from the most prestigious universities. Focuses on pre-publication reviewing of philosophical work and considers anonymity in journal peer reviewing and transparency in academic book…

  14. PUBLISHER'S ANNOUNCEMENT: Refereeing standards

    NASA Astrophysics Data System (ADS)

    Bender, C.; Scriven, N.

    2004-08-01

    submitting papers to J. Phys. A. In addition to the office staff, the journal has two assets of enormous value. First, there is the pool of referees. It is impossible to have an academic system based on publication of original ideas without peer review. I believe that when one submits papers for publication in journals, one assumes a moral responsibility to participate in the peer review system. A published author has an obligation to referee papers and thereby to keep the scientific quality of published work as high as possible. In general, referees' reports that are submitted to scientific journals vary in quality. Some referees reply quickly and write detailed, careful, and helpful reports; other referees write cursory reports that are not so useful. Over the years J. Phys. A has amassed an amazingly talented and sedulous group of referees. I thank the referees of the journal who have worked so hard and have contributed their time without any expectation of financial compensation. I emphasize that the office tries hard to avoid overburdening referees. Sending back a quick and detailed response does not increase the likelihood of the referee receiving another paper to evaluate. (A number of people have told me that they sit on and delay the refereeing of papers in hopes of reducing the number of papers per year that they receive to referee. The office at J. Phys. A works to make this sort of strategy unnecessary.) The second asset is the Board of Editors and the Advisory Panel. For some journals membership on the Board of Editors is a sinecure. However, the 37 members of the Board of Editors and the 50 members of the Advisory Panel of J. Phys. A have been chosen not only because they are distinguished mathematical physicists but also because of their demonstrated willingness to work hard. Six members of the Board of Editors are designated as Section Editors: H Nishimori, Tokyo Institute of Technology, Japan (Statistical Physics); P Grassberger, Bergische Universität GH

  15. Manufacturing technologies

    NASA Astrophysics Data System (ADS)

    The Manufacturing Technologies Center is at the core of Sandia National Laboratories' advanced manufacturing effort which spans the entire product realization process. The center's capabilities in product and process development are summarized in the following disciplines: (1) mechanical - rapid prototyping, manufacturing engineering, machining and computer-aided manufacturing, measurement and calibration, and mechanical and electronic manufacturing liaison; (2) electronics - advanced packaging for microelectronics, printed circuits, and electronic fabrication; and (3) materials - ceramics, glass, thin films, vacuum technology, brazing, polymers, adhesives, composite materials, and process analysis.

  16. Relationship between the Chinese tobacco industry and academic institutions in China

    PubMed Central

    Gan, Quan; Glantz, Stanton A

    2011-01-01

    Objective To investigate the relationship between the Chinese tobacco industry and academic institutions in China. Methods We searched online databases of journal articles published in both Chinese and English for academic institutions in China conducting research with or sponsored by Chinese tobacco companies. We also searched the websites of tobacco companies, their affiliated institutions and academic institutions for reports of collaborations. Results The Chinese tobacco industry, in addition to its own strong tobacco research capacity, maintains close ties with an extensive network of academic research institutions and universities to provide both research and training. The Chinese tobacco industry relies heavily upon academic researchers to advance its research agenda and such reliance has grown over time. Most research deals with farming, manufacturing and management issues, but research on ‘reduced harm’ and health effects has increased from 1% of projects in 1983–1987 to 4% in 2003–2007. Conclusions Chinese academic institutions should consider the fact that engagement with the tobacco industry, particularly on issues related to health or promotion of tobacco products, could damage their reputations, a concern that has led many leading Western universities to eschew relationships with the tobacco industry. To the extent that the Chinese tobacco industry’s involvement in academic institutions affects tobacco control policy making; it violates Article 5.3 of Framework Convention on Tobacco Control, which China ratified in 2005. PMID:20952560

  17. Critical appraisal of published literature

    PubMed Central

    Umesh, Goneppanavar; Karippacheril, John George; Magazine, Rahul

    2016-01-01

    With a large output of medical literature coming out every year, it is impossible for readers to read every article. Critical appraisal of scientific literature is an important skill to be mastered not only by academic medical professionals but also by those involved in clinical practice. Before incorporating changes into the management of their patients, a thorough evaluation of the current or published literature is an important step in clinical practice. It is necessary for assessing the published literature for its scientific validity and generalizability to the specific patient community and reader's work environment. Simple steps have been provided by Consolidated Standard for Reporting Trial statements, Scottish Intercollegiate Guidelines Network and several other resources which if implemented may help the reader to avoid reading flawed literature and prevent the incorporation of biased or untrustworthy information into our practice. PMID:27729695

  18. Academic writing

    NASA Astrophysics Data System (ADS)

    Eremina, Svetlana V.

    2003-10-01

    The series of workshops on academic writing have been developed by academic writing instructors from Language Teaching Centre, Central European University and presented at the Samara Academic Writing Workshops in November 2001. This paper presents only the part dealing with strucutre of an argumentative essay.

  19. Academic Jibberish

    ERIC Educational Resources Information Center

    Krashen, Stephen

    2012-01-01

    In this article, the author talks about academic jibberish. Alfie Kohn states that a great deal of academic writing is incomprehensible even to others in the same area of scholarship. Academic Jibberish may score points for the writer but does not help research or practice. The author discusses jibberish as a career strategy that impresses those…

  20. Creating environments that foster academic integrity.

    PubMed

    Tippitt, Michelle Pixley; Ard, Nell; Kline, Juanita Reese; Tilghman, Joan; Chamberlain, Barbara; Meagher, P Gail

    2009-01-01

    A number of studies related to academic dishonesty within the nursing student population have been published; however, little has been written in the nursing literature regarding academic integrity and means of promoting this value. In addition to the many short-term solutions to prevent cheating and dissuade academic misconduct that are offered, solutions that promote long-term affective changes underlying the acquisition of academic integrity are needed. This article provides a context for discussions related to academic integrity, explores issues facing faculty when dealing with this challenge, and offers short-term and long-term strategies for creating environments that foster academic integrity. PMID:19753858

  1. The Handbook of Scholarly Writing and Publishing

    ERIC Educational Resources Information Center

    Rocco, Tonette S.; Hatcher, Tim; Creswell, John W.

    2011-01-01

    "The Handbook of Scholarly Writing and Publishing" is a groundbreaking resource that offers emerging and experienced scholars from all disciplines a comprehensive review of the essential elements needed to craft scholarly papers and other writing suitable for submission to academic journals. The authors discuss the components of different types of…

  2. How Academic Is Academic Development?

    ERIC Educational Resources Information Center

    Fraser, Kym; Ling, Peter

    2014-01-01

    University provision for academic development is well established in the USA, UK and many other countries. However, arrangements for its provision and staffing vary. In Australia, there has been a trend towards professional rather than academic staff appointments. Is this appropriate? In this paper, the domains of academic development work are…

  3. Cable manufacture

    NASA Technical Reports Server (NTRS)

    Gamble, P.

    1972-01-01

    A survey is presented of flat electrical cable manufacturing, with particular reference to patented processes. The economics of manufacture based on an analysis of material and operating costs is considered for the various methods. Attention is given to the competitive advantages of the several processes and their resulting products. The historical area of flat cable manufacture is presented to give a frame of reference for the survey.

  4. The Professionalization of Academic Advising: Where Are We in 2010?

    ERIC Educational Resources Information Center

    Shaffer, Leigh S.; Zalewski, Jacqueline M.; Leveille, John

    2010-01-01

    In the last year, three respected leaders in academic advising, Wes Habley, Terry Kuhn, and Gary Padak, published articles suggesting that academic advising has not met the standards of scholarship to be considered a field of inquiry, an academic discipline, or a profession. In this article, we examine academic advising history from the…

  5. Best practice guidelines on publishing ethics: a publisher's perspective, 2nd edition.

    PubMed

    Graf, Chris; Deakin, Lisa; Docking, Martine; Jones, Jackie; Joshua, Sue; McKerahan, Tiffany; Ottmar, Martin; Stevens, Allen; Wates, Edward; Wyatt, Deborah

    2014-12-01

    Wiley has updated its publishing ethics guidelines, first published in 2006. The new guidelines provide guidance, resources, and practical advice on ethical concerns that arise in academic publishing for editors, authors, and researchers, among other audiences. New guidance is also included on whistle blowers, animal research, clinical research, and clinical trial registration, addressing cultural differences, human rights, and confidentiality. The guidelines are uniquely interdisciplinary and were reviewed by 24 editors and experts chosen from the wide range of communities that Wiley serves. The new guidelines are also published in Advanced Materials, Headache, International Journal of Clinical Practice, Social Science Quarterly, and on the website http://exchanges.wiley.com/ethicsguidelines. PMID:25329711

  6. Best Practice Guidelines on Publication Ethics: a publisher's perspective.

    PubMed

    Graf, Chris; Wager, Elizabeth; Bowman, Alyson; Fiack, Suzan; Scott-Lichter, Diane; Robinson, Andrew

    2007-01-01

    These Best Practice Guidelines on Publication Ethics describe Blackwell Publishing's position on the major ethical principles of academic publishing and review factors that may foster ethical behavior or create problems. The aims are to encourage discussion, to initiate changes where they are needed, and to provide practical guidance, in the form of Best Practice statements, to inform these changes. Blackwell Publishing recommends that editors adapt and adopt the suggestions outlined to best fit the needs of their own particular publishing environment.

  7. Manufacturing technologies

    SciTech Connect

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  8. Manufacturing Technology.

    ERIC Educational Resources Information Center

    Barnes, James L.

    This curriculum guide is designed to assist junior high school industrial arts teachers in planning new courses and revising existing courses in manufacturing technology. Addressed in the individual units of the guide are the following topics: introduction to manufacturing, materials processing, personnel management, production management,…

  9. What publishers do, and what it costs

    NASA Astrophysics Data System (ADS)

    Hutchins, Jamie

    2015-08-01

    In the 350th year of the academic journal, it is perhaps surprising that Publishers have done such a poor job of explaining exactly what it is we do, how we add value to scientific discourse, and how we justify our charges.IOP Publishing occupies a somewhat unique position as publishing house wholly owned by a major society, and with approximately half of its portfolio managed on behalf of other societies and institutions, including several significant examples in the fields of Astronomy and Astrophysics.Studies of the costs of publishing, several different business models, and some major investment initiatives aimed at improving the author and reader experience, will be drawn upon as context to consider the true costs of publishing.

  10. Manufacturing of microarrays.

    PubMed

    Petersen, David W; Kawasaki, Ernest S

    2007-01-01

    DNA microarray technology has become a powerful tool in the arsenal of the molecular biologist. Capitalizing on high precision robotics and the wealth of DNA sequences annotated from the genomes of a large number of organisms, the manufacture of microarrays is now possible for the average academic laboratory with the funds and motivation. Microarray production requires attention to both biological and physical resources, including DNA libraries, robotics, and qualified personnel. While the fabrication of microarrays is a very labor-intensive process, production of quality microarrays individually tailored on a project-by-project basis will help researchers shed light on future scientific questions.

  11. Copyright of Electronic Publishing.

    ERIC Educational Resources Information Center

    Dong, Elaine; Wang, Bob

    2002-01-01

    Analyzes the importance of copyright, considers the main causes of copyright infringement in electronic publishing, discusses fair use of a copyrighted work, and suggests methods to safeguard copyrighted electronic publishing, including legislation, contracts, and technology. (Author/LRW)

  12. Academic Integrity and Plagiarism: Australasian Perspectives

    ERIC Educational Resources Information Center

    Joyce, Donald

    2007-01-01

    This paper reviews nearly 80 published items concerned with promoting academic integrity and reducing plagiarism. Nearly all of them were published in the last seven years and have authors based in Australasia. Most of them have authors from computing departments and many were published in computing journals or presented at computing conferences.…

  13. Darwin and his publisher.

    PubMed

    McClay, David

    2009-01-01

    Charles Darwin's publisher John Murray played an important, if often underrated, role in bringing his theories to the public. As their letters and publishing archives show they had a friendly, business like and successful relationship. This was despite fundamental scientific and religious differences between the men. In addition to publishing Darwin, Murray also published many of the critical and supportive works and reviews which Darwin's own works excited.

  14. Academic Bullies

    ERIC Educational Resources Information Center

    Fogg, Piper

    2008-01-01

    Many professors have been traumatized by academic bullies. Unlike bullies at school, the academic bully plays a more subtle game. Bullies may spread rumors to undermine a colleague's credibility or shut their target out of social conversations. The more aggressive of the species cuss out co-workers, even threatening to get physical. There is…

  15. Academic Decathlon.

    ERIC Educational Resources Information Center

    Association of California School Administrators.

    This position paper from the Research, Evaluation, and Accreditation Committee of the Association of California School Administrators (ACSA) presents a description of the Academic Decathlon program and offers recommendations for improving the program and ways that ACSA can assist the program. The description of the Academic Decathlon, a ten-event…

  16. Etiquette in scientific publishing.

    PubMed

    Krishnan, Vinod

    2013-10-01

    Publishing a scientific article in a journal with a high impact factor and a good reputation is considered prestigious among one's peer group and an essential achievement for career progression. In the drive to get their work published, researchers can forget, either intentionally or unintentionally, the ethics that should be followed in scientific publishing. In an environment where "publish or perish" rules the day, some authors might be tempted to bend or break rules. This special article is intended to raise awareness among orthodontic journal editors, authors, and readers about the types of scientific misconduct in the current publishing scenario and to provide insight into the ways these misconducts are managed by the Committee of Publishing Ethics. Case studies are presented, and various plagiarism detection software programs used by publishing companies are briefly described.

  17. Behind the Spam: A "Spectral Analysis" of Predatory Publishers

    NASA Astrophysics Data System (ADS)

    Beall, Jeffrey

    2015-08-01

    Most researchers today are bombarded with spam email solicitations from questionable scholarly publishers. These emails solicit article manuscripts, editorial board service, and even ad hoc peer reviews. These "predatory" publishers exploit the scholarly publishing process, patterning themselves after legitimate scholarly publishers yet performing little or no peer review and quickly accepting submitted manuscripts and collecting fees from submitting authors. These counterfeit publishers and journals have published much junk science — especially in the field of cosmology — threatening the integrity of the academic record. This presentation examines the current state of predatory publishing and related scams such as fake impact factors and advises researchers how to navigate scholarly publishing to best avoid predatory publishers and other scholarly publishing-related perils.

  18. Smart Manufacturing.

    PubMed

    Davis, Jim; Edgar, Thomas; Graybill, Robert; Korambath, Prakashan; Schott, Brian; Swink, Denise; Wang, Jianwu; Wetzel, Jim

    2015-01-01

    Historic manufacturing enterprises based on vertically optimized companies, practices, market share, and competitiveness are giving way to enterprises that are responsive across an entire value chain to demand dynamic markets and customized product value adds; increased expectations for environmental sustainability, reduced energy usage, and zero incidents; and faster technology and product adoption. Agile innovation and manufacturing combined with radically increased productivity become engines for competitiveness and reinvestment, not simply for decreased cost. A focus on agility, productivity, energy, and environmental sustainability produces opportunities that are far beyond reducing market volatility. Agility directly impacts innovation, time-to-market, and faster, broader exploration of the trade space. These changes, the forces driving them, and new network-based information technologies offering unprecedented insights and analysis are motivating the advent of smart manufacturing and new information technology infrastructure for manufacturing. PMID:25898070

  19. Smart Manufacturing.

    PubMed

    Davis, Jim; Edgar, Thomas; Graybill, Robert; Korambath, Prakashan; Schott, Brian; Swink, Denise; Wang, Jianwu; Wetzel, Jim

    2015-01-01

    Historic manufacturing enterprises based on vertically optimized companies, practices, market share, and competitiveness are giving way to enterprises that are responsive across an entire value chain to demand dynamic markets and customized product value adds; increased expectations for environmental sustainability, reduced energy usage, and zero incidents; and faster technology and product adoption. Agile innovation and manufacturing combined with radically increased productivity become engines for competitiveness and reinvestment, not simply for decreased cost. A focus on agility, productivity, energy, and environmental sustainability produces opportunities that are far beyond reducing market volatility. Agility directly impacts innovation, time-to-market, and faster, broader exploration of the trade space. These changes, the forces driving them, and new network-based information technologies offering unprecedented insights and analysis are motivating the advent of smart manufacturing and new information technology infrastructure for manufacturing.

  20. Manufacturing Aids

    NASA Astrophysics Data System (ADS)

    1983-01-01

    Contractor's work for Lewis Research Center on "thermal barrier" coatings designed to improve aircraft engine efficiency resulted in two related but separate spinoffs. The Materials and Manufacturing Technology Center of TRW, Inc. invented a robotic system for applying the coating, and in the course of that research found it necessary to develop a new, extremely accurate type of optical gage that offers multiple improvements in controlling the quality of certain manufactured parts.

  1. Scholarly Publishing in the Electronic Age: A Graduate Student's Perspective.

    ERIC Educational Resources Information Center

    Thompsen, Philip A.

    The issue of whether the nature of scholarship is being changed by electronic publishing was made clear to a graduate student when his telecommunication link to the world (his modem) failed. While the newer forms of academic communication offer impressive advantages over traditional publishing, scholars still feel compelled to retain somehow the…

  2. Pearls for Publishing Papers: Tips and Tricks

    PubMed Central

    Ashique, Karalikkattil T; Kaliyadan, Feroze

    2016-01-01

    With the stringent regulations from various academic bodies making it desirable for a post graduate resident to have submitted an original article prior to appearance for their exams or those working in teaching institutions to have published articles to claim credit for applying for promotions and private practitioners to increase their visibility on the academic front, paper, everyone is on a publishing spree. In this article, we attempt to elucidate the processes involved in publication; approaching it in a systematic and practical manner, incorporating some tips and tricks. This collection of pearls is aimed to serve as a beginner's guide to scientific writing and publications. The pearls cover assorted topics like- benefits of publications, collecting resources, various tools available and technical processes related to how a manuscript is processed. PMID:26955091

  3. Pearls for Publishing Papers: Tips and Tricks.

    PubMed

    Ashique, Karalikkattil T; Kaliyadan, Feroze

    2016-01-01

    With the stringent regulations from various academic bodies making it desirable for a post graduate resident to have submitted an original article prior to appearance for their exams or those working in teaching institutions to have published articles to claim credit for applying for promotions and private practitioners to increase their visibility on the academic front, paper, everyone is on a publishing spree. In this article, we attempt to elucidate the processes involved in publication; approaching it in a systematic and practical manner, incorporating some tips and tricks. This collection of pearls is aimed to serve as a beginner's guide to scientific writing and publications. The pearls cover assorted topics like- benefits of publications, collecting resources, various tools available and technical processes related to how a manuscript is processed.

  4. 46. Photograph of a published page. 'OPERATIONS IN INCORPORATION BUILDINGS: ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. Photograph of a published page. 'OPERATIONS IN INCORPORATION BUILDINGS: HOLSTON DEFENSE CORPORATION. 'HOLSTON ARMY AMMUNITION PLANT.' Page 17. (no date). - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

  5. 45. Photograph of a published page. OPERATIONS IN 'H' OR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. Photograph of a published page. OPERATIONS IN 'H' OR DEWATERING BUILDING: HOLSTON DEFENSE CORPORATION. 'HOLSTON ARMY AMMUNITION PLANT.' Page 16. (no date). - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

  6. Challenges in teaching modern manufacturing technologies

    NASA Astrophysics Data System (ADS)

    Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

    2015-07-01

    Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in executing various projects. Lectures are developed to contain materials featuring advanced manufacturing technologies, R&D trends in manufacturing. Pre- and post-surveys were conducted by an external evaluator to assess the impact of the course on increase in student's knowledge of manufacturing; increase students' preparedness and confidence in effective communication and; increase students' interest in pursuing additional academic studies and/or a career path in manufacturing and high technology. The surveyed data indicate that the students perceived significant gains in manufacturing knowledge and preparedness in effective communication. The study also shows that implementation of a collaborative course within multiple institutions requires a robust and collective communication platform.

  7. Academic Village.

    ERIC Educational Resources Information Center

    Boles, Rebecca

    2001-01-01

    Presents design features of the Renner Middle School (Plano, Texas) where the sprawling suburbs have been kept at bay while creating the atmosphere of an academic village. Photos and a floor plan are provided. (GR)

  8. Microgravity Manufacturing

    NASA Technical Reports Server (NTRS)

    Cooper, Ken; Munafo, Paul M. (Technical Monitor)

    2002-01-01

    Manufacturing capability in outer space remains one of the critical milestones to surpass to allow humans to conduct long-duration manned space exploration. The high cost-to-orbit for leaving the Earth's gravitational field continues to be the limiting factor in carrying sufficient hardware to maintain extended life support in microgravity or on other planets. Additive manufacturing techniques, or 'chipless' fabrication, like RP are being considered as the most promising technologies for achieving in situ or remote processing of hardware components, as well as for the repair of existing hardware. At least three RP technologies are currently being explored for use in microgravity and extraterrestrial fabrication.

  9. Lights, Camera, Publishing?

    ERIC Educational Resources Information Center

    Ayoub, Nina C.

    2008-01-01

    Are university presses ready for their close-up? In a nod to Hollywood, a growing number of trade publishers are producing book trailers to promote new titles. But do video teasers have a role in university-press publishing? What about longer formats? Based on an entirely unscientific poll of publicists at 25 university presses, the answer appears…

  10. Publishing: Alternatives and Economics.

    ERIC Educational Resources Information Center

    Penchansky, Mimi; And Others

    The Library Association of the City University of New York presents an annotated bibliography on the subject of small and alternative publishing. In the first section directories, indexes, catalogs, and reviews are briefly described. Book distributors for small publishers are listed next. The major portion of the bibliography is a listing of books…

  11. Publishing in English Education.

    ERIC Educational Resources Information Center

    Judy, Stephen N., Ed.

    Intended for both newcomers to writing and experienced writers, this book presents ideas that will simplify the process of submitting and getting published, cut down on the false starts and mistakes, and provide a catalyst to the educational writer. The titles of the articles and their authors are as follows: "Publishing in the Elementary Language…

  12. Publishing in Peril

    ERIC Educational Resources Information Center

    Lum, Lydia

    2009-01-01

    University presses are more likely to give voice to stories that might not otherwise be told, such as those involving minority perspectives. But opportunities are shrinking. As extensions of their parent schools, academic presses rarely reap profits, experts say. Many rely on school subsidies to survive. Factor in substantial budget cuts to…

  13. The Academic's Handbook. Second Edition.

    ERIC Educational Resources Information Center

    DeNeef, A. Leigh, Ed.; Goodwin, Craufurd D., Ed.

    This book's 29 chapters by various authors are designed to provide immediately useful advice for college and university teachers concerning current higher education issues, employment, teaching and advising, funding research, publishing research, and academic communities and administrations, The chapters are: "A Taxonomy of Colleges and…

  14. Academic Integrity and Informational Technology.

    ERIC Educational Resources Information Center

    Plowman, Travis S.

    2000-01-01

    Considers the impact of information technology on academic integrity. Highlights include machines versus man; honor codes and student cheating; copyrights for digital data; authoring versus writing; intuitive software; and an example and analysis of the use of AutoSummary in Microsoft Word 97 to create a summary of a published article. (Contains…

  15. The Other Side of Academe

    ERIC Educational Resources Information Center

    Germano, William

    2007-01-01

    In this article, the author shares his realizations as he changed careers from a former publisher to a dean of the faculty of humanities and social sciences at the Cooper Union for the Advancement of Science and Art. He describes that his work as a dean in academe is not so much different from his job as a longtime editor. He also relates that…

  16. Data Sharing & Publishing at Nature Publishing Group

    NASA Astrophysics Data System (ADS)

    VanDecar, J. C.; Hrynaszkiewicz, I.; Hufton, A. L.

    2015-12-01

    In recent years, the research community has come to recognize that upon-request data sharing has important limitations1,2. The Nature-titled journals feel that researchers have a duty to share data without undue qualifications, in a manner that allows others to replicate and build upon their published findings. Historically, the Nature journals have been strong supporters of data deposition in communities with existing data mandates, and have required data sharing upon request in all other cases. To help address some of the limitations of upon-request data sharing, the Nature titles have strengthened their existing data policies and forged a new partnership with Scientific Data, to promote wider data sharing in discoverable, citeable and reusable forms, and to ensure that scientists get appropriate credit for sharing3. Scientific Data is a new peer-reviewed journal for descriptions of research datasets, which works with a wide of range of public data repositories4. Articles at Scientific Data may either expand on research publications at other journals or may be used to publish new datasets. The Nature Publishing Group has also signed the Joint Declaration of Data Citation Principles5, and Scientific Data is our first journal to include formal data citations. We are currently in the process of adding data citation support to our various journals. 1 Wicherts, J. M., Borsboom, D., Kats, J. & Molenaar, D. The poor availability of psychological research data for reanalysis. Am. Psychol. 61, 726-728, doi:10.1037/0003-066x.61.7.726 (2006). 2 Vines, T. H. et al. Mandated data archiving greatly improves access to research data. FASEB J. 27, 1304-1308, doi:10.1096/fj.12-218164 (2013). 3 Data-access practices strengthened. Nature 515, 312, doi:10.1038/515312a (2014). 4 More bang for your byte. Sci. Data 1, 140010, doi:10.1038/sdata.2014.10 (2014). 5 Data Citation Synthesis Group: Joint Declaration of Data Citation Principles. (FORCE11, San Diego, CA, 2014).

  17. Issues in Electronic Publishing.

    ERIC Educational Resources Information Center

    Meadow, Charles T.

    1997-01-01

    Discusses issues related to electronic publishing. Topics include writing; reading; production, distribution, and commerce; copyright and ownership of intellectual property; archival storage; technical obsolescence; control of content; equality of access; and cultural changes. (Author/LRW)

  18. Lexical Bundles in L1 and L2 Academic Writing

    ERIC Educational Resources Information Center

    Chen, Yu-Hua; Baker, Paul

    2010-01-01

    This paper adopts an automated frequency-driven approach to identify frequently-used word combinations (i.e., "lexical bundles") in academic writing. Lexical bundles retrieved from one corpus of published academic texts and two corpora of student academic writing (one L1, the other L2), were investigated both quantitatively and qualitatively.…

  19. Apparel Manufacture

    NASA Technical Reports Server (NTRS)

    1995-01-01

    Marshall Space Flight Center teamed with the University of Alabama in Huntsville (UAH) in 1989 on a program involving development of advanced simulation software. Concurrently, the State of Alabama chartered UAH to conduct a technology advancement program in support of the state's apparel manufacturers. In 1992, under contract to Marshall, UAH developed an apparel-specific software package that allows manufacturers to design and analyze modules without making an actual investment -- it functions on ordinary PC equipment. By 1995, Marshall had responded to requests for the package from more than 400 companies in 36 states; some of which reported savings up to $2 million. The National Garment Company of Missouri, for example, uses the system to design and balance a modular line before committing to expensive hardware; for setting up sewing lines; and for determining the composition of a new team.

  20. An Interinstitutional Academic Collaborative Partnership to End Health Disparities

    ERIC Educational Resources Information Center

    Logan, Barbara N.; Davis, Leroy; Parker, Veronica G.

    2010-01-01

    Much has been published in the health care literature describing partnerships between academic institutions and community or health care agencies that are designed to improve health outcomes in medically underserved populations. However, little has been published regarding partnerships between minority- and majority-serving academic institutions…

  1. Manufacturing technology

    SciTech Connect

    Leonard, J.A.; Floyd, H.L.; Goetsch, B.; Doran, L.

    1993-08-01

    This bulletin depicts current research on manufacturing technology at Sandia laboratories. An automated, adaptive process removes grit overspray from jet engine turbine blades. Advanced electronic ceramics are chemically prepared from solution for use in high- voltage varistors. Selective laser sintering automates wax casting pattern fabrication. Numerical modeling improves performance of photoresist stripper (simulation on Cray supercomputer reveals path to uniform plasma). And mathematical models help make dream of low- cost ceramic composites come true.

  2. Green Manufacturing

    SciTech Connect

    Patten, John

    2013-12-31

    Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

  3. Promoting Diversity and Sustainability in the Scholarly Publishing Ecosystem: The University of Michigan's MPublishing Redefines the Role of Libraries in Publishing

    ERIC Educational Resources Information Center

    Hawkins, Kevin S.

    2012-01-01

    MPublishing, the primary academic publishing enterprise of the University of Michigan, has united the various publishing activities of the university, all of which serve the needs of scholars and the university by fostering new publishing models that cannot exist where profit is the primary value. This article provides a brief description of…

  4. Academic Journal Embargoes and Full Text Databases.

    ERIC Educational Resources Information Center

    Brooks, Sam

    2003-01-01

    Documents the reasons for embargoes of academic journals in full text databases (i.e., publisher-imposed delays on the availability of full text content) and provides insight regarding common misconceptions. Tables present data on selected journals covering a cross-section of subjects and publishers and comparing two full text business databases.…

  5. Academic Aspirations

    ERIC Educational Resources Information Center

    Durant, Linda

    2013-01-01

    As colleges and universities become even more complex organizations, advancement professionals need to have the skills, experience, and academic credentials to succeed in this ever-changing environment. Advancement leaders need competencies that extend beyond fundraising, alumni relations, and communications and marketing. The author encourages…

  6. Academic Cloning.

    ERIC Educational Resources Information Center

    Sikula, John P.; Sikula, Andrew F.

    1980-01-01

    The authors define "cloning" as an integral feature of all educational systems, citing teaching practices which reward students for closely reproducing the teacher's thoughts and/or behaviors and administrative systems which tend to promote like-minded subordinates. They insist, however, that "academic cloning" is not a totally negative practice.…

  7. Academic Culture.

    ERIC Educational Resources Information Center

    Clark, Burton R.

    With fragmentation the dominant trend in academic settings around the world, the larger wholes of profession, enterprise, and system are less held together by integrative ideology. Strong ideological bonding is characteristic of the parts, primarily the disciplines. The larger aggregations are made whole mainly by formal superstructure, many…

  8. Academic Politics.

    ERIC Educational Resources Information Center

    Brown, William R.

    The internal politics of colleges and the influence of a current emphasis on efficiency on the traditional independence of the academician are analyzed. It is suggested that the academician does not work in the same differentiated, and therefore interdependent, way as someone in industry or a bureaucracy. Academic activity is segmented, which…

  9. Academic Freedom.

    ERIC Educational Resources Information Center

    Tobin, Brian G.

    The strength of academic freedom has always depended upon historical circumstances. In the United States, higher education began with institutions founded and controlled by religious sects. The notion of who gets educated and to what ends expanded as American democracy expanded. By the 1980's, legitimate calls for equality became a general…

  10. Publishing perishing? Towards tomorrow's information architecture.

    PubMed

    Seringhaus, Michael R; Gerstein, Mark B

    2007-01-01

    Scientific articles are tailored to present information in human-readable aliquots. Although the Internet has revolutionized the way our society thinks about information, the traditional text-based framework of the scientific article remains largely unchanged. This format imposes sharp constraints upon the type and quantity of biological information published today. Academic journals alone cannot capture the findings of modern genome-scale inquiry. Like many other disciplines, molecular biology is a science of facts: information inherently suited to database storage. In the past decade, a proliferation of public and private databases has emerged to house genome sequence, protein structure information, functional genomics data and more; these digital repositories are now a vital component of scientific communication. The next challenge is to integrate this vast and ever-growing body of information with academic journals and other media. To truly integrate scientific information we must modernize academic publishing to exploit the power of the Internet. This means more than online access to articles, hyperlinked references and web-based supplemental data; it means making articles fully computer-readable with intelligent markup and Structured Digital Abstracts.Here, we examine the changing roles of scholarly journals and databases. We present our vision of the optimal information architecture for the biosciences, and close with tangible steps to improve our handling of scientific information today while paving the way for an expansive central index in the future.

  11. Ethics in Scientific Publishing

    NASA Astrophysics Data System (ADS)

    Sage, Leslie J.

    2012-08-01

    We all learn in elementary school not turn in other people's writing as if it were our own (plagiarism), and in high school science labs not to fake our data. But there are many other practices in scientific publishing that are depressingly common and almost as unethical. At about the 20 percent level authors are deliberately hiding recent work -- by themselves as well as by others -- so as to enhance the apparent novelty of their most recent paper. Some people lie about the dates the data were obtained, to cover up conflicts of interest, or inappropriate use of privileged information. Others will publish the same conference proceeding in multiple volumes, or publish the same result in multiple journals with only trivial additions of data or analysis (self-plagiarism). These shady practices should be roundly condemned and stopped. I will discuss these and other unethical actions I have seen over the years, and steps editors are taking to stop them.

  12. Electronic Scholarly Journal Publishing.

    ERIC Educational Resources Information Center

    Peek, Robin P.; Pomerantz, Jeffrey P.

    1998-01-01

    Reviews the literature that has led to the possible transformation of scholarly publishing through electronic distribution of journals. Discusses the concepts of scholarly communication and computer mediated communication; network delivery experiments; CD-ROM delivery projects; acceptance by the scholarly community; and research and development.…

  13. Publishers, Participants All

    ERIC Educational Resources Information Center

    Richardson, Will

    2011-01-01

    Students need opportunities throughout the curriculum to follow their passions and publish quality work for global audiences to interact with. Social media afford the opportunity for students to contribute to the world in meaningful ways, do real work for real audiences for real purposes, find great teachers and collaborators from around the…

  14. New Media Publishing.

    ERIC Educational Resources Information Center

    Ritchie, Ian

    The media industry is the fastest growing business in the world today; additional leisure time, coupled with increasingly global distribution, has created large international markets for information and entertainment. The United Kingdom is relatively strong in the three main areas concerned with new media publishing: information technology,…

  15. Censorship and the Publishers

    ERIC Educational Resources Information Center

    O'Donnell, James J.

    1975-01-01

    "What one school or community sees as educationally effective, another might denounce as tasteless or unnecessarily abrasive or just too novel." If you've ever wondered what it's like to be a caught on the publisher's side of censorship in schools, read this article. (Editor)

  16. Academic Vocabulary in Agriculture Research Articles: A Corpus-Based Study

    ERIC Educational Resources Information Center

    Martinez, Iliana A.; Beck, Silvia C.; Panza, Carolina B.

    2009-01-01

    Recent critical views on the usefulness of a general academic vocabulary have heightened the relevance of developing discipline specific academic wordlists to meet the needs of non-native English writers who must read and publish articles in English. Using Coxhead's (2000) Academic Word List, we set out to identify the academic words in a corpus…

  17. Prepare to publish.

    PubMed

    Price, P M

    2000-01-01

    "I couldn't possibly write an article." "I don't have anything worthwhile to write about." "I am not qualified to write for publication." Do any of these statements sound familiar? This article is intended to dispel these beliefs. You can write an article. You care for the most complex patients in the health care system so you do have something worthwhile to write about. Beside correct spelling and grammar there are no special skills, certificates or diplomas required for publishing. You are qualified to write for publication. The purpose of this article is to take the mystique out of the publication process. Each step of publishing an article will be explained, from idea formation to framing your first article. Practical examples and recommendations will be presented. The essential components of the APA format necessary for Dynamics: The Official Journal of the Canadian Association of Critical Care Nurses will be outlined and resources to assist you will be provided. PMID:11235448

  18. Prepare to publish.

    PubMed

    Price, P M

    2000-01-01

    "I couldn't possibly write an article." "I don't have anything worthwhile to write about." "I am not qualified to write for publication." Do any of these statements sound familiar? This article is intended to dispel these beliefs. You can write an article. You care for the most complex patients in the health care system so you do have something worthwhile to write about. Beside correct spelling and grammar there are no special skills, certificates or diplomas required for publishing. You are qualified to write for publication. The purpose of this article is to take the mystique out of the publication process. Each step of publishing an article will be explained, from idea formation to framing your first article. Practical examples and recommendations will be presented. The essential components of the APA format necessary for Dynamics: The Official Journal of the Canadian Association of Critical Care Nurses will be outlined and resources to assist you will be provided.

  19. Reaching the grassroots: publishing methodologies for development organizations.

    PubMed

    Zielinski, C

    1987-01-01

    There are 3 major distinctions between the traditional form of academic publishing and publishing for the grassroots as a development-organization activity, particularly in developing countries. Whereas academic publishing seeks to cover the target audience in its entirety, grassroots publishing can only cover a sampling. Academic publishing fulfills a need, while grassroots publishing demonstrates a need and a way to fulfill it. Finally, whereas academic publishing is largely a support activity aimed at facilitating the dissemination of information as a relatively minor part of a technical program, grassroots publishing is a more substantive activity aimed at producing a catalytic effect. Publication for the grassroots further calls for a different methodological approach. Given the constraint of numbers, publications aimed at the grassroots can only be examples or prototypes. The function of a prototype is to serve both as a basis for translation, adaptation, and replication and as a model end result. The approach to the use and promotion of prototypes differs according to the specific country situation. In countries with a heterogenous culture or several different languages, 2 items should be produced: a prototype of the complete text, which should be pretested and evaluated, and a prototype adaptation kit stripped of cultural and social biases. Promotion of the translation and replication of a publication can be achieved by involving officials at the various levels of government, interesting international and voluntary funding agencies, and stimulating indigenous printing capacities at the community level. The most important factors are the appropriateness of the publication in solving specific priority problems and the interest and involvement of national and state authorities at all stages of the project. PMID:12280779

  20. Chicago Manufacturing Tech Prep. Fiscal Year 1991 Final Report.

    ERIC Educational Resources Information Center

    Chicago City Colleges, IL.

    During its first year of development in 1991, the Chicago Manufacturing Technical Preparation (Tech Prep) Program established a plan for implementing an industry-driven, articulated 4-year manufacturing technology course of study that integrates applied academic courses with technical courses and meets industry hiring standards. The project…

  1. Science communications: publishing a scientific paper.

    PubMed

    Kiefer, Julie C

    2010-02-01

    Publications are the lifeblood of academic science. They are essential to the scientific community as records of research completed, building blocks for new research, and templates for new ways of thinking. Publications are also essential for individual job security. Frequently they are considered a gauge of productivity that is taken under heavy consideration for hiring, promotion, and funding decisions. Consequently, completed research is of little value unless preserved in publication. Yet publishing can be a challenging prospect, particularly in the face of abundant competition. Here, five panelists, John Fallon, Ph.D., Min Han, Ph.D., Janet Rossant, Ph.D., Cliff Tabin, Ph.D., and Yoshiko Takahashi, Ph.D., offer their advice on manuscript preparation and negotiating the publishing process. PMID:20014106

  2. PLAGIARISM IN SCIENTIFIC PUBLISHING

    PubMed Central

    Masic, Izet

    2012-01-01

    Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader’s own scientific contribution. There is no general regulation of control of

  3. Plagiarism in scientific publishing.

    PubMed

    Masic, Izet

    2012-12-01

    Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader's own scientific contribution. There is no general regulation of control of

  4. RETRACTION: Publishers' Note

    NASA Astrophysics Data System (ADS)

    post="(Executive Editor">Graeme Watt,

    2010-06-01

    Withdrawal of the paper "Was the fine-structure constant variable over cosmological time?" by L. D. Thong, N. M. Giao, N. T. Hung and T. V. Hung (EPL, 87 (2009) 69002) This paper has been formally withdrawn on ethical grounds because the article contains extensive and repeated instances of plagiarism. EPL treats all identified evidence of plagiarism in the published articles most seriously. Such unethical behaviour will not be tolerated under any circumstance. It is unfortunate that this misconduct was not detected before going to press. My thanks to Editor colleagues from other journals for bringing this fact to my attention.

  5. Some Reflections on Scholarly Review and Academic Publication.

    ERIC Educational Resources Information Center

    Schwier, Richard A.

    This paper argues that the scholarly review process in refereed academic journal publishing restricts research creativity and timeliness, promotes inertia, and wastes resources. The publishing process of a Canadian journal (The Canadian Journal of Educational Communication), published three times annually, which uses a blind referee process is…

  6. Opportunities for Libraries with Print-on-Demand Publishing

    ERIC Educational Resources Information Center

    Blummer, Barbara

    2005-01-01

    Academic libraries, university presses, and commercial ventures are embracing print-on-demand publishing to improve services as well as reduce costs. The concept dates to the early 1990s, but problems with the technology coupled with a lack of interest by libraries and book vendors hindered its popularity. Today, print-on-demand remains ideal for…

  7. An Examination of Articles Published on Preschool Education in Turkey

    ERIC Educational Resources Information Center

    Yilmaz, Kursad; Altinkurt, Yahya

    2012-01-01

    This study aims to examine articles published in Turkey on Preschool Education both in terms of subject and method. Sample of the study based on document analysis in qualitative method consists of seven Turkey-based journals indexed in SSCI (Social Science Citation Index) and 10 journals indexed in Turkish Academic Network and Information Center…

  8. Cloud manufacturing: a new manufacturing paradigm

    NASA Astrophysics Data System (ADS)

    Zhang, Lin; Luo, Yongliang; Tao, Fei; Li, Bo Hu; Ren, Lei; Zhang, Xuesong; Guo, Hua; Cheng, Ying; Hu, Anrui; Liu, Yongkui

    2014-03-01

    Combining with the emerged technologies such as cloud computing, the Internet of things, service-oriented technologies and high performance computing, a new manufacturing paradigm - cloud manufacturing (CMfg) - for solving the bottlenecks in the informatisation development and manufacturing applications is introduced. The concept of CMfg, including its architecture, typical characteristics and the key technologies for implementing a CMfg service platform, is discussed. Three core components for constructing a CMfg system, i.e. CMfg resources, manufacturing cloud service and manufacturing cloud are studied, and the constructing method for manufacturing cloud is investigated. Finally, a prototype of CMfg and the existing related works conducted by the authors' group on CMfg are briefly presented.

  9. Advanced Manufacturing Technologies

    NASA Technical Reports Server (NTRS)

    Fikes, John

    2016-01-01

    Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

  10. Why publish with AGU?

    NASA Astrophysics Data System (ADS)

    Graedel, T. E.

    The most visible activity of the American Geophysical Union is its publication of scientific journals. There are eight of these: Journal of Geophysical Research—Space Physics (JGR I), Journal of Geophysical Research—Solid Earth (JGR II), Journal of Geophysical Research—Oceans and Atmospheres (JGR III), Radio Science (RS), Water Resources Research (WRR), Geophysical Research Letters (GRL), Reviews of Geophysics and Space Physics (RGSP), and the newest, Tectonics.AGU's journals have established solid reputations for scientific excellence over the years. Reputation is not sufficient to sustain a high quality journal, however, since other factors enter into an author's decision on where to publish his or her work. In this article the characteristics of AGU's journals are compared with those of its competitors, with the aim of furnishing guidance to prospective authors and a better understanding of the value of the products to purchasers.

  11. Literature Review on Dynamic Cellular Manufacturing System

    NASA Astrophysics Data System (ADS)

    Nouri Houshyar, A.; Leman, Z.; Pakzad Moghadam, H.; Ariffin, M. K. A. M.; Ismail, N.; Iranmanesh, H.

    2014-06-01

    In previous decades, manufacturers faced a lot of challenges because of globalization and high competition in markets. These problems arise from shortening product life cycle, rapid variation in demand of products, and also rapid changes in manufcaturing technologies. Nowadays most manufacturing companies expend considerable attention for improving flexibility and responsiveness in order to overcome these kinds of problems and also meet customer's needs. By considering the trend toward the shorter product life cycle, the manufacturing environment is towards manufacturing a wide variety of parts in small batches [1]. One of the major techniques which are applied for improving manufacturing competitiveness is Cellular Manufacturing System (CMS). CMS is type of manufacturing system which tries to combine flexibility of job shop and also productivity of flow shop. In addition, Dynamic cellular manufacturing system which considers different time periods for the manufacturing system becomes an important topic and attracts a lot of attention to itself. Therefore, this paper made attempt to have a brief review on this issue and focused on all published paper on this subject. Although, this topic gains a lot of attention to itself during these years, none of previous researchers focused on reviewing the literature of that which can be helpful and useful for other researchers who intend to do the research on this topic. Therefore, this paper is the first study which has focused and reviewed the literature of dynamic cellular manufacturing system.

  12. Desktop Manufacturing Technologies.

    ERIC Educational Resources Information Center

    Snyder, Mark

    1991-01-01

    Desktop manufacturing is the use of data from a computer-assisted design system to construct actual models of an object. Emerging processes are stereolithography, laser sintering, ballistic particle manufacturing, laminated object manufacturing, and photochemical machining. (SK)

  13. Document-Centred Discourse on the Web: A Publishing Tool for Students, Tutors and Researchers.

    ERIC Educational Resources Information Center

    Shum, Simon Buckingham; Sumner, Tamara

    This paper describes how the authors are exploiting the potential of interactive World Wide Web media to support a central part of academic life--the publishing, critiquing, and discussion of documents. The paper begins with an overview of documents in academic life and a discussion of paper-based or "papyrocentric" print and scholarly work. The…

  14. Publishing in the Next Few Years: A Commercial Publisher's Perspective

    NASA Astrophysics Data System (ADS)

    Blom, Harry J. J.

    Over the past 15 years, internet technology changed the ways of publishing tremendously. It is truly revolutionary that both fresh and historic science publications are so much easier to search and find. This revolution has not been completed and all parties involved in science publishing are continuously adjusting their activities to the new rules and opportunities. From a commercial publisher's perspective, I will extrapolate what happens today to predict what happens in the next few years with journal subscriptions, book publishing, marketing, production and other steps in the publishing process.

  15. Academic detailing.

    PubMed

    Shankar, P R; Jha, N; Piryani, R M; Bajracharya, O; Shrestha, R; Thapa, H S

    2010-01-01

    There are a number of sources available to prescribers to stay up to date about medicines. Prescribers in rural areas in developing countries however, may not able to access some of them. Interventions to improve prescribing can be educational, managerial, and regulatory or use a mix of strategies. Detailing by the pharmaceutical industry is widespread. Academic detailing (AD) has been classically seen as a form of continuing medical education in which a trained health professional such as a physician or pharmacist visits physicians in their offices to provide evidence-based information. Face-to-face sessions, preferably on an individual basis, clear educational and behavioural objectives, establishing credibility with respect to objectivity, stimulating physician interaction, use of concise graphic educational materials, highlighting key messages, and when possible, providing positive reinforcement of improved practices in follow-up visits can increase success of AD initiatives. AD is common in developed countries and certain examples have been cited in this review. In developing countries the authors have come across reports of AD in Pakistan, Sudan, Argentina and Uruguay, Bihar state in India, Zambia, Cuba, Indonesia and Mexico. AD had a consistent, small but potentially significant impact on prescribing practices. AD has much less resources at its command compared to the efforts by the industry. Steps have to be taken to formally start AD in Nepal and there may be specific hindering factors similar to those in other developing nations. PMID:21209521

  16. Open Access Publishing - Strengths and Strategies

    NASA Astrophysics Data System (ADS)

    Rasmussen, Martin

    2010-05-01

    The journal crisis and the demand for free accessibility to the results of publicly funded research were the main drivers of the Open Access movement since the late 1990's. Besides many academic institutions that support the different ways of Open Access publishing, there is a growing number of publishing houses that are specialized on this new access and business model of scholarly literature. The lecture provides an overview of the different kinds of Open Access publishing, discusses the variety of underlying business models, names the advantages and potentials for researches and the public, and overcomes some objections against Open Access. Besides the increased visibility and information supply, the topic of copyrights and exploitation rights will be discussed. Furthermore, it is a central aim of the presentation to show that Open Access does not only support full peer-review, but also provides the potential for even enhanced quality assurance. The financing of business models based on open accessible literature is another important part to be outlined in the lecture.

  17. Seven Tips for Publishing Books

    ERIC Educational Resources Information Center

    Kumashiro, Kevin K.

    2004-01-01

    The publishing industry in the field of education is undergoing several profound changes. New publishers are emerging while established publishers are merging. More book series (that is, books on a certain topic that are approved and mentored by one or more established scholars in the field) are being created. Alternative paths are becoming more…

  18. Strategic Change in AAS Publishing

    NASA Astrophysics Data System (ADS)

    Steffen, Julie

    2015-08-01

    The American Astronomical Society has embarked on a process of strategic change in its publishing program. The process has incuded authors, AAS leaders, editors, publishing experts, librarians, and data scientists. This session will outline the still ongoing process and present some both upcoming and already available new AAS Publishing features and services to the global astronomy community.

  19. 77 FR 58124 - Hardins Manufacturing Company, Hardins Resources Company; Notice of Transfer of Exemption

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-19

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Hardins Manufacturing Company, Hardins Resources Company; Notice of Transfer of Exemption 1. By email filed April 23, 2012, Hardins Manufacturing Company informed the...

  20. Integrated automation for manufacturing of electronic assemblies

    NASA Technical Reports Server (NTRS)

    Sampite, T. Joseph

    1991-01-01

    Since 1985, the Naval Ocean Systems Center has been identifying and developing needed technology for flexible manufacturing of hybrid microelectronic assemblies. Specific projects have been accomplished through contracts with manufacturing companies, equipment suppliers, and joint efforts with other government agencies. The resulting technology has been shared through semi-annual meetings with government, industry, and academic representatives who form an ad hoc advisory panel. More than 70 major technical capabilities have been identified for which new development is needed. Several of these developments have been completed and are being shared with industry.

  1. Can We Still Speak of There Being an Academic Profession?

    ERIC Educational Resources Information Center

    Shattock, Michael

    2014-01-01

    This article seeks to compare the characteristics of the academic profession as described historically by Perkin in 1969 against the definitions of a profession derived from the published views of sociologists and others. It then measures the position of the academic community today against these definitions: a common range of professional tasks…

  2. The Academic Researcher Role: Enhancing Expectations and Improved Performance

    ERIC Educational Resources Information Center

    Kyvik, Svein

    2013-01-01

    This article distinguishes between six tasks related to the academic researcher role: (1) networking; (2) collaboration; (3) managing research; (4) doing research; (5) publishing research; and (6) evaluation of research. Data drawn from surveys of academic staff, conducted in Norwegian universities over three decades, provide evidence that the…

  3. Improving Publication: Advice for Busy Higher Education Academics

    ERIC Educational Resources Information Center

    Gibbs, Anita

    2016-01-01

    A major challenge for higher education academics is to research and publish when faced with substantial teaching responsibilities, higher student numbers, and higher output expectations. The focus of this piece is to encourage publication more generally by educators, and to build publication capacity, which academic developers can facilitate. The…

  4. Academic Writing: Supporting Faculty in a Critical Competency for Success

    ERIC Educational Resources Information Center

    Dankoski, Mary E.; Palmer, Megan M.; Banks, Julianna; Brutkiewicz, Randy R.; Walvoord, Emily; Hoffmann-Longtin, Krista; Bogdewic, Stephen P.; Gopen, George D.

    2012-01-01

    All faculty regardless of discipline or school need to be highly competent at writing for an academic audience. The "publish or perish" pressure is alive and well for academic advancement, publications, and external grant funding. Yet few faculty, particularly in the health professions and sciences, receive formal training on the craft of writing.…

  5. Pathology Sections: The Four Chronic Diseases of Academic Corruption

    ERIC Educational Resources Information Center

    Chinese Education and Society, 2007

    2007-01-01

    One might say that people bitterly detest "academic corruption" and call it immoral and dishonest academic conduct, and that the deliberate falsification, covert plagiarism, and empty rhetoric employed by certain scholars when expounding their theories and the various means they use when attempting to get their works published and awarded prizes…

  6. Checklist for clinical readiness published

    Cancer.gov

    Scientists from NCI, together with collaborators from outside academic centers, have developed a checklist of criteria to evaluate the readiness of complex molecular tests that will guide decisions made during clinical trials. The checklist focuses on tes

  7. Current Developments in Measuring Academic Behavioural Confidence

    ERIC Educational Resources Information Center

    Sander, Paul

    2009-01-01

    Using published findings and by further analyses of existing data, the structure, validity and utility of the Academic Behavioural Confidence scale (ABC) is critically considered. Validity is primarily assessed through the scale's relationship with other existing scales as well as by looking for predicted differences. The utility of the ABC scale…

  8. German Academic Programs in Technical Communication

    ERIC Educational Resources Information Center

    Smith, Herb J.

    2003-01-01

    While research in international technical communication has flourished during the last 10 years, there has been little published on technical communication programs outside the United States. This article addresses this need by describing 12 representative academic technical communication programs in Germany, including Germany's first master's…

  9. Fostering Research and Publication in Academic Libraries

    ERIC Educational Resources Information Center

    Sassen, Catherine; Wahl, Diane

    2014-01-01

    This study concerns administrative support provided to encourage the research and publishing activities of academic librarians working in Association of Research Libraries member libraries. Deans and directors of these libraries were asked to respond to an online survey concerning the support measures that their libraries provide, as well as their…

  10. A Publisher view on the future of scholarly publishing

    NASA Astrophysics Data System (ADS)

    Stoop, Jose

    2015-08-01

    The journal publishing landscape is changing rapidly. With the massive move from print to online taking place at the end of the last century, we are now seeing a shift from traditional subscription based publishing model to ‘hybrid’ models and full Open Access publishing. Other major changes are taking place at the article interface level (from a static PDF to the “Article of the Future”), in data and code repository linking, in publishing data and code and hence make it citable and discoverable, and in many other subject area specific online innovations that are being introduced.Elsevier is actively involved - both in Open Access publishing, and in content innovation - in discussing, and taking the lead through many big and smaller scale initiatives. This presentation will outline Elsevier’s perspective on the future of scientific publishing with regards to these developments.

  11. Medical Publishing Triage – Chronicling Predatory Open Access Publishers

    PubMed Central

    Beall, Jeffrey

    2013-01-01

    This editorial examines the problem of predatory publishers and how they have negatively affected scholarly communication. Society relies on high-quality, peer-reviewed articles for public policy, legal cases, and improving the public health. Researchers need to be aware of how predatory publishers operate and need to avoid falling into their traps. The editorial examines the recent history of predatory publishers and how they have become prominent in the world of scholarly journals. PMID:25737780

  12. 16 CFR 1102.30 - Publication of manufacturer comments.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... ACT REGULATIONS PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE (Eff. Jan. 10, 2011....24, and 1102.26, the Commission will publish in the Database manufacturer comments submitted...

  13. 76 FR 14690 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-17

    ... November 1, 2010, and published in the Federal Register on November 12, 2010, 75 FR 69464, Noramco Inc... Fentanyl (9801) II The company plans to manufacture the listed controlled substances in bulk...

  14. 76 FR 44358 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-25

    ... 13, 2011, and published in the Federal Register on April 20, 2011, 76 FR 22146, Noramco, Inc., 500... substances: Drug Schedule Amphetamine (1100) II Phenylacetone (8501) II The company plans to manufacture...

  15. 77 FR 5849 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-06

    ... September 28, 2011, and published in the Federal Register on October 7, 2011, 76 FR 62450, GE Healthcare... Drug Enforcement Administration (DEA) to be registered as a bulk manufacturer of Cocaine (9041),...

  16. 75 FR 1813 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-13

    ... September 14, 2009, and published in the Federal Register on September 18, 2009, (74 FR 47962), GE... the Drug Enforcement Administration (DEA) to be registered as a bulk manufacturer of Cocaine (9041),...

  17. 76 FR 81979 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-29

    ... September 9, 2011, and published in the Federal Register on September 15, 2011, 76 FR 57080, Chemic... to the Drug Enforcement Administration (DEA) to be registered as a bulk manufacturer of Cocaine...

  18. 76 FR 10069 - Manufacturer of Controlled Substances Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-23

    ... October 14, 2010, and published in the Federal Register on October 26, 2010, 75 FR 65659, Chemic... to the Drug Enforcement Administration (DEA) to be registered as a bulk manufacturer of Cocaine...

  19. 77 FR 5848 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-06

    ... October 20, 2011, and published in the Federal Register on October 28, 2011, 76 FR 66994, Research... Marihuana (7360) I Cocaine (9041) II The Institute will manufacture marihuana, and cocaine derivatives...

  20. 75 FR 1813 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-13

    ... August 28, 2009, and published in the Federal Register on September 8, 2009, (74 FR 46231), Chemic... to the Drug Enforcement Administration (DEA) to be registered as a bulk manufacturer of Cocaine...

  1. 76 FR 77257 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-12

    ... August 10, 2011, and published in the Federal Register on August 18, 2011, 76 FR 51400, Cambridge Isotope... Enforcement Administration (DEA) to be registered as a bulk manufacturer of Morphine (9300), a basic class...

  2. 78 FR 4157 - Manufactured Home Construction and Safety Standards Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-18

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HOUSING AND... Agencies and manufacturers request certification labels, track payment, track production, refund monies... INFORMATION CONTACT: Colette Pollard, Reports Management Officer, QDAM, Department of Housing and...

  3. 75 FR 75498 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-03

    ... 28, 2010 and published in the Federal Register on June 8, 2010, (75 FR 32506), Boehringer Ingelheim...) II Methadone (9250) II Methadone Intermediate (9254) II The company plans to manufacture the...

  4. 75 FR 69466 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-12

    ... 26, 2010, and published in the Federal Register on April 30, 2010 (75 FR 22844), Lonza Riverside, 900... Methylphenidate (1724) II The company plans to manufacture bulk active pharmaceutical ingredients (API's)...

  5. Library Faculty Publishing and Intellectual Property Issues: A Survey of Attitudes and Awareness

    ERIC Educational Resources Information Center

    Carter, Howard; Snyder, Carolyn A.; Imre, Andrea

    2007-01-01

    Researchers from Southern Illinois University Carbondale (SIUC) surveyed faculty members from 10 academic research libraries to learn about scholarly publishing activities, attitudes, and policies. Areas of special interest included the effect of publishers' intellectual property policies and institutional promotion and tenure processes on library…

  6. Back to the Future: At Last Librarians Chart a New Course in Scholarly Electronic Publishing.

    ERIC Educational Resources Information Center

    Wilkinson, Frances C.; Rosen, Barbara; Dennis, Nancy K.

    1997-01-01

    HighWire Press, an enterprise unit of Stanford University libraries and Academic Information Resources is charting new waters as co-publishers of low-cost, graphically-rich Internet editions of university and scholarly society e-journals. An interview with its publisher answers questions involving HighWire's Mission, as well as its uniqueness,…

  7. Perspective on Open-Access Publishing: An Interview with Peter Suber

    ERIC Educational Resources Information Center

    Cornwell, Reid; Suber, Peter

    2008-01-01

    In this edition of Perspectives, Reid Cornwell discusses open-access publishing with Peter Suber, senior researcher at the Scholarly Publishing and Academic Resources Coalition, senior research professor of philosophy at Earlham College, and currently visiting fellow at Yale Law School. Open access means that scholarly work is freely and openly…

  8. The Current State of European Studies in North America and of Scholarly Publishing in Western Europe.

    ERIC Educational Resources Information Center

    Hacken, Richard

    1998-01-01

    Relates how scholarly publishing in Western Europe feeds into North America. Discusses globalization, regionalism, and particularism; new models and research methodology; Biblio-Darwinism (survival of the fittest publishing languages) and the language of the imprint; differing academic infrastructures of Europe; booming scholarly-title production;…

  9. Blade Manufacturing Improvement: Remote Blade Manufacturing Demonstration

    SciTech Connect

    ASHWILL, THOMAS D.

    2003-05-01

    The objective of this program was to investigate manufacturing improvements for wind turbine blades. The program included a series of test activities to evaluate the strength, deflection, performance, and loading characteristics of the prototype blades. The original contract was extended in order to continue development of several key blade technologies identified in the project. The objective of the remote build task was to demonstrate the concept of manufacturing wind turbine blades at a temporary manufacturing facility in a rural environment. TPI Composites successfully completed a remote manufacturing demonstration in which four blades were fabricated. The remote demonstration used a manufacturing approach which relied upon material ''kits'' that were organized in the factory and shipped to the site. Manufacturing blades at the wind plant site presents serious logistics difficulties and does not appear to be the best approach. A better method appears to be regional manufacturing facilities, which will eliminate most of the transportation cost, without incurring the logistical problems associated with fabrication directly onsite. With this approach the remote facilities would use commonly available industrial infrastructure such as enclosed workbays, overhead cranes, and paved staging areas. Additional fatigue testing of the M20 root stud design was completed with good results. This design provides adhesive bond strength under fatigue loading that exceeds that of the fastener. A new thru-stud bonding concept was developed for the M30 stud design. This approach offers several manufacturing advantages; however, the test results were inconclusive.

  10. External Reporting Lines of Academic Special Libraries: A Health Sciences Case Study

    ERIC Educational Resources Information Center

    Buhler, Amy G.; Ferree, Nita; Cataldo, Tara T.; Tennant, Michele R.

    2010-01-01

    Very little literature exists on the nature of external reporting lines and funding structures of academic special libraries. This study focuses on academic health sciences libraries. The authors analyze information gathered from statistics published by the Association of Academic Health Sciences Libraries (AAHSL) from 1977 through 2007; an…

  11. An Update on AGU Publishing

    NASA Astrophysics Data System (ADS)

    Hilst, Rob; Hanson, Brooks

    2013-07-01

    In the past year, AGU publishing has undergone substantial change, and we realize that this has caused some anxiety and concern among you, our members. As the start of a regular Eos series on issues in scientific publishing in general and AGU's content in particular, we provide here an overview and update of recent developments, with an emphasis on the partnership between AGU and Wiley. Topical entries, for instance on open access, will be published later.

  12. Research Library Publishing Services: New Options for University Publishing

    ERIC Educational Resources Information Center

    Hahn, Karla L.

    2008-01-01

    A 2007 Association of Research Libraries (ARL) survey indicates that research libraries are rapidly developing publishing services: 65 percent of 80 responding ARL member libraries currently deliver or are in processing of planning these services. Established journal titles dominate this emerging publishing sector and are the main drivers of…

  13. 75 FR 69466 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-12

    ... bulk to manufacture in-vitro diagnostic test kits. The company distributes the test kits for sale to its customers. The process used in manufacturing the test kits irreversibly alters the controlled... 29, 2010, and published in the Federal Register on April 16, 2010, (75 FR 20001), Siemens...

  14. 76 FR 81979 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-29

    ... 25, 2011, and published in the Federal Register on June 3, 2011, 76 FR 32225, AMPAC Fine Chemicals... controlled substances: Drug Schedule Thebaine (9333) II Poppy Straw Concentrate (9670) II The company is a contract manufacturer. In reference to Poppy Straw Concentrate the company will manufacture...

  15. 75 FR 62570 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-12

    ... 10, 2008, and published in the Federal Register on March 19, 2008 (73 FR 14841), Chemica, Inc., 316... Administration (DEA) to be registered as a bulk manufacturer of methamphetamine (1105), a basic class of... manufacture of Benzphetamine, a schedule III non-narcotic controlled substance. The methamphetamine will...

  16. Conflicts of interest in medical publishing: it's all about trustworthiness.

    PubMed

    Gjersvik, P

    2015-11-01

    Openness and transparency are vital for the trustworthiness of scientific journals and researchers. The term 'conflict of interest' should be defined broadly. Both financial and nonfinancial conflicts of interest may influence the reporting and evaluation of medical research. This should not hinder scientific cooperation between academic and industry-affiliated researchers. In the name of transparency, scientific journals should disclose the identity of a paper's peer reviewers and publish more information on the authors.

  17. Mechanical Prototyping and Manufacturing Internship

    NASA Technical Reports Server (NTRS)

    Grenfell, Peter

    2016-01-01

    significantly reduced cost. I acquired and improved manufacturing and prototyping skills during my tour including learning about a CAD (Computer-Aided Design) program called Creo (Creo Parametric; design software), gaining valuable conventional machining experience with lathes, CNC (Computer Numerical Control) milling machines and various other tools, and improving my engineering project communication and collaboration skills. The internship also allowed me to better understand operations at NASA. I plan to work in the aerospace industry or do academic research benefitting space science and exploration, and this internship experience will enable me to have insight into manufacturing processes for research and development.

  18. Cooperation and coauthorship in scientific publishing

    NASA Astrophysics Data System (ADS)

    Wardil, Lucas; Hauert, Christoph

    2015-01-01

    Research collaboration occurs more frequently today than in the past. As a consequence, cooperation and competition are crucial determinants of academic success. In multiauthored publications, not all authors contribute evenly. Hence, some authors end up with less time or resources to work on parallel projects, decreasing their number of publications. Although detailed information on the contribution of each author in multiauthored publications is generally not available, the order of authors often discloses information on differential contributions. Here we analyze the full data set of Physical Review journals to show that, along with the increasingly number of multiauthored publications, first authors incur costs and last authors are bestowed benefits in terms of number of publications. In other words, authors publishing more often as first authors have fewer publications in the short-term than authors publishing more often as last authors. Using a simplified network representation where direct links represent the costly action of first authors towards last authors, we analyze the evolution of cooperation in multiauthored publications.

  19. AAS Publishing News: Astronomical Software Citation Workshop

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2015-07-01

    Do you write code for your research? Use astronomical software? Do you wish there were a better way of citing, sharing, archiving, or discovering software for astronomy research? You're not alone! In April 2015, AAS's publishing team joined other leaders in the astronomical software community in a meeting funded by the Sloan Foundation, with the purpose of discussing these issues and potential solutions. In attendance were representatives from academic astronomy, publishing, libraries, for-profit software sharing platforms, telescope facilities, and grantmaking institutions. The goal of the group was to establish “protocols, policies, and platforms for astronomical software citation, sharing, and archiving,” in the hopes of encouraging a set of normalized standards across the field. The AAS is now collaborating with leaders at GitHub to write grant proposals for a project to develop strategies for software discoverability and citation, in astronomy and beyond. If this topic interests you, you can find more details in this document released by the group after the meeting: http://astronomy-software-index.github.io/2015-workshop/ The group hopes to move this project forward with input and support from the broader community. Please share the above document, discuss it on social media using the hashtag #astroware (so that your conversations can be found!), or send private comments to julie.steffen@aas.org.

  20. Cooperation and coauthorship in scientific publishing.

    PubMed

    Wardil, Lucas; Hauert, Christoph

    2015-01-01

    Research collaboration occurs more frequently today than in the past. As a consequence, cooperation and competition are crucial determinants of academic success. In multiauthored publications, not all authors contribute evenly. Hence, some authors end up with less time or resources to work on parallel projects, decreasing their number of publications. Although detailed information on the contribution of each author in multiauthored publications is generally not available, the order of authors often discloses information on differential contributions. Here we analyze the full data set of Physical Review journals to show that, along with the increasingly number of multiauthored publications, first authors incur costs and last authors are bestowed benefits in terms of number of publications. In other words, authors publishing more often as first authors have fewer publications in the short-term than authors publishing more often as last authors. Using a simplified network representation where direct links represent the costly action of first authors towards last authors, we analyze the evolution of cooperation in multiauthored publications.

  1. Energy Use in Manufacturing

    EIA Publications

    2006-01-01

    This report addresses both manufacturing energy consumption and characteristics of the manufacturing economy related to energy consumption. In addition, special sections on fuel switching capacity and energy-management activities between 1998 and 2002 are also featured in this report.

  2. Facility location selection for global manufacturing

    NASA Astrophysics Data System (ADS)

    Kalantari, Amir Hossein

    The selection of a facility location for operations is an important decision in strategic planning of manufacturing corporations. As globalization is transcending national borders, the whole world is becoming the domain of site selection problem. This, in turn, significantly changes the nature of facility location problem. The change is, particularly, paramount in the consideration of attributes impacting the selection decision. Many recent studies have considered the global dimensions of manufacturing site selections and have cited economic, social, and political factors impacting manufacturing operations. The complexity of facility location problem combined with the emerging global factors impacting site selection for manufacturing operations poses challenging research topics including the selection of critical attributes and the development of a methodology for data analysis for manufacturing facility selection. In this thesis I have reviewed the academic as well as industrial literature on recent developments on global facility location problem and have identified the most frequently cited/used attributes for the selection suitable manufacturing sites. Furthermore, I have developed a new similarity coefficient for cluster analysis for the formation of groups of prospective sites. Finally, I have employed an average clustering algorithm to identify these groups. In addition, I have demonstrated my methodology by a numerical example.

  3. Academic Delay of Gratification and Academic Achievement

    ERIC Educational Resources Information Center

    Bembenutty, Hefer

    2011-01-01

    The ability to delay gratification is the cornerstone of all academic achievement and education. It is by delaying gratification that learners can pursue long-term academic and career goals. In general, "delay of gratification" refers to an individual's ability to forgo immediate rewards for the sake of more valuable ones later (Mischel, 1996).…

  4. Publish--Don't Perish!

    ERIC Educational Resources Information Center

    Halpin, Glennelle; Halpin, Gerald

    This paper proposes basic guidelines for the publishing and preparation of manuscripts, with the focus on the publication of empirical research in scientific journals. It is assumed that research is complete only when the results are shared. The guidelines serve as standards, and cover all stages of publishing from the first review of literature…

  5. A Manifesto for Scholarly Publishing

    ERIC Educational Resources Information Center

    Dougherty, Peter J.

    2009-01-01

    While university presses grapple with the economic and technological challenges now affecting how books are published--the subject of a thousand and one AAUP conference sessions, e-mail-list debates, and news articles--discussion of "what" is published seems to have taken a back seat. And understandably so. Why obsess about content if books are…

  6. Desktop Publishing in the University.

    ERIC Educational Resources Information Center

    Burstyn, Joan N., Ed.

    Highlighting changes in the work of people within the university, this book presents nine essays that examine the effects of desktop publishing and electronic publishing on professors and students, librarians, and those who work at university presses and in publication departments. Essays in the book are: (1) "Introduction: The Promise of Desktop…

  7. Association of Academic Physiatrists

    MedlinePlus

    ... RFC Newsletter - Physiatry in Motion Discussion Forums FileShare Libraries Membership Directory About AAP President's Message Mission & Strategic ... children('.slide-panel.notactive').removeClass('notactive'); autoPlay();}); }); Your Academic Home for Physiatry The Association of Academic Physiatrists ( ...

  8. Success of Academic Failures

    ERIC Educational Resources Information Center

    Meskill, Victor P.

    1971-01-01

    The process of readmission of academically troubled students should be subjected to extensive critical analysis. The human resources represented by the college academic dropout, often overlooked in the past should be reclaimed and channeled into productive areas. (Author)

  9. Globalization, Open Access Publishing, and the Disappearance of Print: Threat or Opportunity?

    NASA Astrophysics Data System (ADS)

    Blom, J. J.

    Academic publishing is changing rapidly as a result of mutually dependent developments. Electronic publishing was born through the emergence of the Internet. The Internet has accelerated globalization, which in turn has enhanced the consolidation of commercial publishing houses and the collaboration between libraries. Old business models are being replaced by new business models, such as open access publishing. The familiar print format is disappearing for journals and perhaps for books. This chapter presents an overview of these developments and addresses potential threats and opportunities to the parties involved in publishing.

  10. Workforce Development for Manufacturing

    ERIC Educational Resources Information Center

    Bernard, Rosalie

    2007-01-01

    In a recent skills gap report, the National Association of Manufacturers (NAM) noted some disturbing trends in the gap between the demand for highly skilled manufacturing workers and the potential supply. The NAM report notes that smaller manufacturers rank finding qualified workers ahead of energy costs, taxes and government regulations on the…

  11. Academic Inbreeding in Nursing

    ERIC Educational Resources Information Center

    Miller, Michael H.

    1977-01-01

    Academic inbreeding, the employment for faculty positions of persons who receive their graduate training at the same academic institution, is considered detrimental to an institution's academic environment. Results of a study conducted at 54 universities revealed that almost half the faculty (48 percent) in collegiate nursing programs are drawn…

  12. What Is Academic Vocabulary?

    ERIC Educational Resources Information Center

    Baumann, James F.; Graves, Michael F.

    2010-01-01

    In this article, the authors address the construct of "academic vocabulary." First, they attempt to bring some clarity to a constellation of terms surrounding academic vocabulary. Second, they compare and contrast definitions of academic vocabulary. Third, they review typologies that researchers and writers have proposed to organize academic…

  13. The Academic Adviser

    ERIC Educational Resources Information Center

    Darling, Ruth

    2015-01-01

    In this essay, I explore the idea that "academic" advisers are "academics" who play a major role in connecting the general education curriculum to the students' experience as well as connecting the faculty to the students' holistic experience of the curriculum. The National Academic Advising Association Concept of Academic…

  14. Bridges to Academic Writing.

    ERIC Educational Resources Information Center

    Gornowich, Barbara Bernstein; Nelson, Anthony

    The materials comprise the curriculum for an introductory course in academic writing for limited English proficient adult or college students. The guide is intended for the upper end of a survival language skills course or the lowest end of an academic developmental writing sequence. The curriculum instructs students on academic life and assists…

  15. Manufacturing Planning Guide

    NASA Technical Reports Server (NTRS)

    Waid, Michael

    2011-01-01

    Manufacturing process, milestones and inputs are unknowns to first-time users of the manufacturing facilities. The Manufacturing Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their project engineering personnel in manufacturing planning and execution. Material covered includes a roadmap of the manufacturing process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, products, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  16. Publishers, Publishing and the Internet: How Journal Publishing Will Survive and Prosper in the Electronic Age.

    ERIC Educational Resources Information Center

    Cox, John E.

    1997-01-01

    The Internet will change how publishers function. Publishers will need to acquire new skills in developing multimedia; become custodians of intellectual property rather than producers of printed artifacts; know copyright and contract law, especially international aspects; and work more closely with universities to deliver electronic information…

  17. Critical Connections: Health and Academics

    PubMed Central

    Michael, Shannon L; Merlo, Caitlin L; Basch, Charles E; Wentzel, Kathryn R; Wechsler, Howell

    2015-01-01

    BACKGROUND While it is a national priority to support the health and education of students, these sectors must better align, integrate, and collaborate to achieve this priority. This article summarizes the literature on the connection between health and academic achievement using the Whole School, Whole Community, and Whole Child (WSCC) framework as a way to address health-related barriers to learning. METHODS A literature review was conducted on the association between student health and academic achievement. RESULTS Most of the evidence examined the association between student health behaviors and academic achievement, with physical activity having the most published studies and consistent findings. The evidence supports the need for school health services by demonstrating the association between chronic conditions and decreased achievement. Safe and positive school environments were associated with improved health behaviors and achievement. Engaging families and community members in schools also had a positive effect on students' health and achievement. CONCLUSIONS Schools can improve the health and learning of students by supporting opportunities to learn about and practice healthy behaviors, providing school health services, creating safe and positive school environments, and engaging families and community. This evidence supports WSCC as a potential framework for achieving national educational and health goals. PMID:26440816

  18. 78 FR 73965 - Manufactured Home Construction and Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-09

    ... the MHCC was published as a final rule in the Federal Register on November 30, 2005 (70 FR 72024... Safety Standards published as a proposed rule in the Federal Register on July 13, 2010 (75 FR 39871... for manufactured housing in 2010 (75 FR 7556, February 22, 2010). Given the DOE rulemaking, HUD...

  19. Academic freedom, public reactions, and anonymity.

    PubMed

    Häyry, Matti

    2014-05-01

    Academic freedom can be defined as immunity against adverse reactions from the general public, designed to keep scholars unintimidated and productive even after they have published controversial ideas. Francesca Minerva claims that this notion of strict instrumental academic freedom is supported by Ronald Dworkin, and that anonymity would effectively defend the sphere of immunity implied by it. Against this, I argue that the idea defended by Minerva finds no support in the work by Dworkin referred to; that anonymity would not in most cases effectively protect the kind of immunity sought after; and that in some cases it would not even be desirable to protect scholars from public reactions to their controversial claims.

  20. I publish in I edit?--Do editorial board members of urologic journals preferentially publish their own scientific work?

    PubMed

    Mani, Jens; Makarević, Jasmina; Juengel, Eva; Ackermann, Hanns; Nelson, Karen; Bartsch, Georg; Haferkamp, Axel; Blaheta, Roman A

    2013-01-01

    Scientists who are members of an editorial board have been accused of preferentially publishing their scientific work in the journal where they serve as editor. Reputation and academic standing do depend on an uninterrupted flow of published scientific work and the question does arise as to whether publication mainly occurs in the self-edited journal. This investigation was designed to determine whether editorial board members of five urological journals were more likely to publish their research reports in their own rather than in other journals. A retrospective analysis was conducted for all original reports published from 2001-2010 by 65 editorial board members nominated to the boards of five impact leading urologic journals in 2006. Publications before editorial board membership, 2001-2005, and publications within the period of time as an editorial board member, 2006-2010, were identified. The impact factors of the journals were also recorded over the time period 2001-2010 to see whether a change in impact factor correlated with publication locality. In the five journals as a whole, scientific work was not preferentially published in the journal in which the scientists served as editor. However, significant heterogeneity among the journals was evident. One journal showed a significant increase in the amount of published papers in the 'own' journal after assumption of editorship, three journals showed no change and one journal showed a highly significant decrease in publishing in the 'own' journal after assumption of editorship.

  1. I Publish in I Edit? - Do Editorial Board Members of Urologic Journals Preferentially Publish Their Own Scientific Work?

    PubMed Central

    Mani, Jens; Makarević, Jasmina; Juengel, Eva; Ackermann, Hanns; Nelson, Karen; Bartsch, Georg

    2013-01-01

    Scientists who are members of an editorial board have been accused of preferentially publishing their scientific work in the journal where they serve as editor. Reputation and academic standing do depend on an uninterrupted flow of published scientific work and the question does arise as to whether publication mainly occurs in the self-edited journal. This investigation was designed to determine whether editorial board members of five urological journals were more likely to publish their research reports in their own rather than in other journals. A retrospective analysis was conducted for all original reports published from 2001–2010 by 65 editorial board members nominated to the boards of five impact leading urologic journals in 2006. Publications before editorial board membership, 2001–2005, and publications within the period of time as an editorial board member, 2006–2010, were identified. The impact factors of the journals were also recorded over the time period 2001–2010 to see whether a change in impact factor correlated with publication locality. In the five journals as a whole, scientific work was not preferentially published in the journal in which the scientists served as editor. However, significant heterogeneity among the journals was evident. One journal showed a significant increase in the amount of published papers in the ‘own’ journal after assumption of editorship, three journals showed no change and one journal showed a highly significant decrease in publishing in the ‘own’ journal after assumption of editorship. PMID:24386258

  2. The Ethics of Reprint Publishing

    ERIC Educational Resources Information Center

    Garrett, Daniel C.

    1971-01-01

    Reprint publishers have been charged with deceptive marketing tactics, high prices and needless duplication of titles which would seem to reflect a questionable code of ethics. Some possible solutions to these, poor communications, problems are given. (Author)

  3. Publishing Platform for Scientific Software - Lessons Learned

    NASA Astrophysics Data System (ADS)

    Hammitzsch, Martin; Fritzsch, Bernadette; Reusser, Dominik; Brembs, Björn; Deinzer, Gernot; Loewe, Peter; Fenner, Martin; van Edig, Xenia; Bertelmann, Roland; Pampel, Heinz; Klump, Jens; Wächter, Joachim

    2015-04-01

    Scientific software has become an indispensable commodity for the production, processing and analysis of empirical data but also for modelling and simulation of complex processes. Software has a significant influence on the quality of research results. For strengthening the recognition of the academic performance of scientific software development, for increasing its visibility and for promoting the reproducibility of research results, concepts for the publication of scientific software have to be developed, tested, evaluated, and then transferred into operations. For this, the publication and citability of scientific software have to fulfil scientific criteria by means of defined processes and the use of persistent identifiers, similar to data publications. The SciForge project is addressing these challenges. Based on interviews a blueprint for a scientific software publishing platform and a systematic implementation plan has been designed. In addition, the potential of journals, software repositories and persistent identifiers have been evaluated to improve the publication and dissemination of reusable software solutions. It is important that procedures for publishing software as well as methods and tools for software engineering are reflected in the architecture of the platform, in order to improve the quality of the software and the results of research. In addition, it is necessary to work continuously on improving specific conditions that promote the adoption and sustainable utilization of scientific software publications. Among others, this would include policies for the development and publication of scientific software in the institutions but also policies for establishing the necessary competencies and skills of scientists and IT personnel. To implement the concepts developed in SciForge a combined bottom-up / top-down approach is considered that will be implemented in parallel in different scientific domains, e.g. in earth sciences, climate research and

  4. 78 FR 18234 - Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-26

    ... Administration (FDA) is amending a final rule that appeared in the Federal Register of April 9, 2007 (72 FR 17397... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND...; Manufacturers Importing Electronic Products Into the United States; Agent Designation; Change of Address...

  5. Enhancing Manufacturing Process Education via Computer Simulation and Visualization

    ERIC Educational Resources Information Center

    Manohar, Priyadarshan A.; Acharya, Sushil; Wu, Peter

    2014-01-01

    Industrially significant metal manufacturing processes such as melting, casting, rolling, forging, machining, and forming are multi-stage, complex processes that are labor, time, and capital intensive. Academic research develops mathematical modeling of these processes that provide a theoretical framework for understanding the process variables…

  6. The Geoscience Data Journal: collaboration between data repositories and publishing houses in data publishing

    NASA Astrophysics Data System (ADS)

    Murphy, F. L.; Callaghan, S. A.; Hardaker, P. J.; Allan, R. J.

    2012-04-01

    It is becoming increasingly important to the scientific and wider non-academic communities that the data that underpins key scientific results should be made available to allow for the testing and confirmation of those results. Historically, publishing data has been so difficult as to be prohibitive, and those cases where it has been possible, the raw data has had to have been converted to other formats; for example, instead of raw numbers being published in a (lengthy) table, it has been converted to a graph. As scientists' ability to create and collect new data has been growing, so too has our ability to store it. A dataset can be stored on any digital medium that is convenient, but future-proofing the data so that it is readable and understandable in 20 years' time remains a time-consuming and difficult job. Yet, if the results drawn from that data are to stand up to scrutiny in the future, the data must be curated and archived properly. Openly sharing data is often proposed as a method for ensuring that data underpinning the scientific record is kept. There are issues with this in that sharing data in an unstructured way often results in the provenance of the dataset (and often the dataset itself) being changed as it passes from one "owner" to another, thereby reducing any chances of using that data to test the reproducibility of results originally made from it. Also, the present mechanism for academic recognition revolves around the production and publication of peer-reviewed papers. The production of high-quality datasets takes time and effort, and is often insufficiently recognised as an activity worthy of prestige, even though the papers that result from that dataset may be considered of significant scientific importance. Simple sharing of data is unlikely to provide the data creators with the academic recognition they deserve. It is for these reasons that a partnership has been developed between the British Atmospheric Data Centre, the Royal Meteorological

  7. 77 FR 10373 - Greenhouse Gas Reporting Program: Electronics Manufacturing: Revisions to Heat Transfer Fluid...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-22

    ... used in the electronics manufacturing industry. The proposal was published on September 9, 2011 (76 FR... AGENCY 40 CFR Part 98 RIN 2060-AR09 Greenhouse Gas Reporting Program: Electronics Manufacturing... rule. SUMMARY: The EPA is finalizing technical revisions to the electronics manufacturing...

  8. 76 FR 13664 - Elkay Manufacturing, Broadview, IL; Amended Certification Regarding Eligibility To Apply for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-14

    ... Employment and Training Administration Elkay Manufacturing, Broadview, IL; Amended Certification Regarding... Manufacturing, Broadview, Illinois. The notice will be published soon in the Federal Register. At the request of... for all workers of Elkay Manufacturing Company, Broadview, Illinois, separated from employment on...

  9. Publishing protocols for partnered research.

    PubMed

    Hysong, Sylvia J; Woodard, LeChauncy; Garvin, Jennifer H; Murawsky, Jeffrey; Petersen, Laura A

    2014-12-01

    Published scientific protocols are advocated as a means of controlling bias in research reporting. Indeed, many journals require a study protocol with manuscript submission. However, publishing protocols of partnered research (PPR) can be challenging in light of the research model's dynamic nature, especially as no current reporting standards exist. Nevertheless, as these protocols become more prevalent, a priori documentation of methods in partnered research studies becomes increasingly important. Using as illustration a suite of studies aimed at improving coordination and communication in the primary care setting, we sought to identify challenges in publishing PPR relative to traditional designs, present alternative solutions to PPR publication, and propose an initial checklist of content to be included in protocols of partnered research. Challenges to publishing PPR include reporting details of research components intended to be co-created with operational partners, changes to sampling and entry strategy, and alignment of scientific and operational goals. Proposed solutions include emulating reporting standards of qualitative research, participatory action research, and adaptive trial designs, as well as embracing technological tools that facilitate publishing adaptive protocols, with version histories that are able to be updated as major protocol changes occur. Finally, we present a proposed checklist of reporting elements for partnered research protocols. PMID:25355092

  10. Should surgical outcomes be published?

    PubMed

    Chou, Evelyn; Abboudi, Hamid; Shamim Khan, Mohammed; Dasgupta, Prokar; Ahmed, Kamran

    2015-04-01

    Despite publishing surgical outcomes being a positive step forwards in the progression of England's healthcare system, it has no doubt been faced with criticism and reservations. This review article aims to discuss the pros and cons of publishing individual surgical outcomes, as well as the challenges faced. Publishing outcomes requires data from a number of sources such as national clinical audits, hospital episode statistics, patient-reported outcomes, registers and information from revalidation. As yet, eight surgical specialties have begun publishing their data, including cardiac (coronary artery bypass graft, valve and aortic surgery), endocrine (thyroidectomy, lobectomy, isthmusectomy), orthopaedic (hip and knee replacement), urological (full and partial nephrectomies, nephroureterectomy), colorectal (bowel tumour removal), upper gastrointestinal (stomach cancer and oesophageal cancer removal, bariatric surgery), ear, nose and throat surgery (larynx, oral cavity, oropharynx, hypopharynx and salivary gland cancer removal), as well as vascular surgery (abdominal aortic aneurysm, carotid endarterectomy). However, not all procedures have been addressed. Despite the controversy surrounding the topic of publishing surgical outcomes, the advantages of reporting outcomes outweigh the disadvantages, and these challenges can be overcome, to create a more reliable, trustworthy and transparent NHS. Perhaps one of the main challenges has been the difficulty in collecting large amounts of clinically significant data able to quantify the performance of surgeons.

  11. Publishing protocols for partnered research.

    PubMed

    Hysong, Sylvia J; Woodard, LeChauncy; Garvin, Jennifer H; Murawsky, Jeffrey; Petersen, Laura A

    2014-12-01

    Published scientific protocols are advocated as a means of controlling bias in research reporting. Indeed, many journals require a study protocol with manuscript submission. However, publishing protocols of partnered research (PPR) can be challenging in light of the research model's dynamic nature, especially as no current reporting standards exist. Nevertheless, as these protocols become more prevalent, a priori documentation of methods in partnered research studies becomes increasingly important. Using as illustration a suite of studies aimed at improving coordination and communication in the primary care setting, we sought to identify challenges in publishing PPR relative to traditional designs, present alternative solutions to PPR publication, and propose an initial checklist of content to be included in protocols of partnered research. Challenges to publishing PPR include reporting details of research components intended to be co-created with operational partners, changes to sampling and entry strategy, and alignment of scientific and operational goals. Proposed solutions include emulating reporting standards of qualitative research, participatory action research, and adaptive trial designs, as well as embracing technological tools that facilitate publishing adaptive protocols, with version histories that are able to be updated as major protocol changes occur. Finally, we present a proposed checklist of reporting elements for partnered research protocols.

  12. Manufacturing with the Sun

    NASA Technical Reports Server (NTRS)

    Murphy, Lawrence M.; Hauser, Steven G.; Clyne, Richard J.

    1991-01-01

    Concentrated solar radiation is now a viable alternative source for many advanced manufacturing processes. Researchers at the National Renewable Energy Laboratory (NREL) have demonstrated the feasibility of processes such as solar induced surface transformation of materials (SISTM), solar based manufacturing, and solar pumped lasers. Researchers are also using sunlight to decontaminate water and soils polluted with organic compounds; these techniques could provide manufacturers with innovative alternatives to traditional methods of waste management. The solar technology that is now being integrated into today's manufacturing processes offer greater potential for tomorrow, especially as applied to the radiation abundant environment available in space and on the lunar surface.

  13. A Knowledge Database on Thermal Control in Manufacturing Processes

    NASA Astrophysics Data System (ADS)

    Hirasawa, Shigeki; Satoh, Isao

    A prototype version of a knowledge database on thermal control in manufacturing processes, specifically, molding, semiconductor manufacturing, and micro-scale manufacturing has been developed. The knowledge database has search functions for technical data, evaluated benchmark data, academic papers, and patents. The database also displays trends and future roadmaps for research topics. It has quick-calculation functions for basic design. This paper summarizes present research topics and future research on thermal control in manufacturing engineering to collate the information to the knowledge database. In the molding process, the initial mold and melt temperatures are very important parameters. In addition, thermal control is related to many semiconductor processes, and the main parameter is temperature variation in wafers. Accurate in-situ temperature measurment of wafers is important. And many technologies are being developed to manufacture micro-structures. Accordingly, the knowledge database will help further advance these technologies.

  14. Open Access Publishing in Astronomy

    NASA Astrophysics Data System (ADS)

    Grothkopf, U.; Meakins, S.

    2012-08-01

    Open Access (OA) in scholarly literature means the "immediate, free availability on the public internet, permitting any users to read, download, copy, distribute, print, search or link to the full text of these articles". The Open Access movement has been made possible thanks to the wide-spread availability of internet access and has received increasing interest since the 1990s, mostly due to the fast rising journal subscription prices. This presentation will review the current situation of Open Access in astronomy. It will answer the question why it makes sense to publish in an OA journal and will provide criteria to judge the quality of OA journals and publishers, along with suggestions how to identify so-called predatory publishers.

  15. [Sanitary classification of publishing products].

    PubMed

    Teksheva, L M

    2001-01-01

    The natural asthenopic pattern of the process of reading shows it necessary to set sanitary standards of publishing production, namely, printing type styling and the printing quality of publications. The necessity of sanitary classification of publishing production stems from the specificity of reading the publications of different functional uses and from the physiological features of vision in different age group readers. The developed sanitary classification of printing production is based on the researches into the actual visual load while reading the publications of different types by readers of different ages.

  16. The Academic Structure in Japan: Institutional Hierarchy and Academic Mobility.

    ERIC Educational Resources Information Center

    Arimoto, Akira

    The characteristics of the Japanese academic structure are examined with attention to the evolution of institutional hierarchy, the closed academic structure, and the effects of the academic structure upon academic research. The evolution of Japan's institutional hierarchy in academics has been tightly related to factors of nationalism,…

  17. Manufacturers' support policies.

    PubMed

    1992-09-01

    Choosing an effective plan for supporting a medical device is critical to its safe use, cost-effectiveness, and longevity. Hospitals can choose from a variety of support providers, including manufacturers, third-party service vendors, or hospital clinical engineering (CE) departments. However, if the hospital plans to use a third-party service vendor or its own CE department to provide support, the manufacturer's cooperation or assistance will still be needed to implement the support plan effectively. Over the years, ECRI has received many comments from hospitals about the way in which manufacturers respond to their equipment support needs. We have learned that some manufacturers are not willing to assist third-party service vendors or in-house service programs or do not always deliver the support they promise. Also, hospitals do not always consider their support needs before purchase, when they have the most leverage to negotiate flexible support arrangements. To help foster better equipment support and customer satisfaction, we polled manufacturers that have participated in recent Health Devices Evaluations to obtain detailed information about their policies toward manufacturers' contract, third-party, and in-house support. Ready access to this information will help hospitals evaluate whether manufacturers' support policies will meet their needs, and it will allow them to minimize problems by working with the manufacturer to negotiate optimal support arrangements during the purchase process. In this article, we briefly discuss the factors to consider when evaluating support alternatives and manufacturers' support policies. We also present the questions posed to each manufacturer on our Manufacturers' Support Policies Questionnaire, along with a summary of the responses that we received for each question.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:1428903

  18. Partnerships with Academic Departments

    ERIC Educational Resources Information Center

    English, Anthony M.

    2013-01-01

    This chapter describes how professional and continuing higher education units can develop and sustain successful partnerships with academic departments in order to deliver educational programs effectively to students.

  19. Ethics and academic integrity.

    PubMed

    Milton, Constance L

    2015-01-01

    Academics from across the globe must navigate ever-increasing demands for research, practice, and educational productivity. With the increased demands, nurse faculty must choose value priorities and actions that reflect academic integrity. What does it mean to choose actions that reflect personal integrity in the academic arena? This article begins an important nursing philosophical and theoretical discussion that members and future members of the discipline of nursing must reflect upon and grapple with as they consider what it potentially means to act with straight thinking and integrity in academics. PMID:25520458

  20. Twelve tips for getting your manuscript published.

    PubMed

    Cook, David A

    2016-01-01

    The author shares twelve practical tips on how to navigate the process of getting a manuscript published. These tips, which apply to all fields of academic writing, advise that during the initial preparation phase authors should: (1) plan early to get it out the door; (2) address authorship and writing group expectations up front; (3) maintain control of the writing; (4) ensure complete reporting; (5) use electronic reference management software; (6) polish carefully before they submit; (7) select the right journal; and (8) follow journal instructions precisely. Rejection after the first submission is likely, and when this occurs authors should (9) get it back out the door quickly, but first (10) take seriously all reviewer and editor suggestions. Finally, when the invitation comes to revise and resubmit, authors should (11) respond carefully to every reviewer suggestion, even if they disagree, and (12) get input from others as they revise. The author also shares detailed suggestions on the creation of effective tables and figures, and on how to respond to reviewer critiques.

  1. EDITORIAL AND PUBLISHER'S NOTE: BIPM to Publish Metrologia

    NASA Astrophysics Data System (ADS)

    Blackburn, D.

    1990-01-01

    Beginning in January of next year Metrologia will be published by the Bureau International des Poids et Mesures. This does not mean that a new journal is being created: externally the journal may have changed a little, but internally any changes will be of form rather than of substance. Metrologia was intended originally as a vehicle that would permit the metrological community to communicate progress in fundamental scientific measurements, to report original experiments and techniques in the area of secondary measurement, to review work in specialist fields and to disseminate the decisions of the Comité International des Poids et Mesures. The promotion of these activities remains the central objective of editorial policy. The separation from our friends in Springer-Verlag is one we view with some regret and not a little trepidation. On the days when things were not going well in the editorial office at the BIPM it was always a source of comfort to remember the willingness and professionalism with which our colleagues at Springer-Verlag supported the production and distribution of the journal. For some time, however, it has been felt at the BIPM that the Bureau should take direct responsibility for all aspects of Metrologia. This feeling led to discussions on the future of the journal and in June to the decision to separate. For those of us at the BIPM, the change represents an occasion to review the activities and priorities of the journal and so to revivify it. Our hope is to retain the best features of the existing Metrologia and to add to them others which will both expand the readership and bring to the journal a yet greater fraction of the finest articles on the topic of precise measurement. Publisher's Note The first issue of Metrologia was published in 1965. That issue, as have been all others since, was published by Springer-Verlag "under the Auspices of the International Committee for Weights and Measures". This phrase is the public expression of what

  2. Clean Energy Manufacturing Initiative

    SciTech Connect

    2013-04-01

    The initiative will strategically focus and rally EERE’s clean energy technology offices and Advanced Manufacturing Office around the urgent competitive opportunity for the United States to be the leader in the clean energy manufacturing industries and jobs of today and tomorrow.

  3. Beryllium Manufacturing Processes

    SciTech Connect

    Goldberg, A

    2006-06-30

    This report is one of a number of reports that will be combined into a handbook on beryllium. Each report covers a specific topic. To-date, the following reports have been published: (1) Consolidation and Grades of Beryllium; (2) Mechanical Properties of Beryllium and the Factors Affecting these Properties; (3) Corrosion and Corrosion Protection of Beryllium; (4) Joining of Beryllium; (5) Atomic, Crystal, Elastic, Thermal, Nuclear, and other Properties of Beryllium; and (6) Beryllium Coating (Deposition) Processes and the Influence of Processing Parameters on Properties and Microstructure. The conventional method of using ingot-cast material is unsuitable for manufacturing a beryllium product. Beryllium is a highly reactive metal with a high melting point, making it susceptible to react with mold-wall materials forming beryllium compounds (BeO, etc.) that become entrapped in the solidified metal. In addition, the grain size is excessively large, being 50 to 100 {micro}m in diameter, while grain sizes of 15 {micro}m or less are required to meet acceptable strength and ductility requirements. Attempts at refining the as-cast-grain size have been unsuccessful. Because of the large grain size and limited slip systems, the casting will invariably crack during a hot-working step, which is an important step in the microstructural-refining process. The high reactivity of beryllium together with its high viscosity (even with substantial superheat) also makes it an unsuitable candidate for precision casting. In order to overcome these problems, alternative methods have been developed for the manufacturing of beryllium. The vast majority of these methods involve the use of beryllium powders. The powders are consolidated under pressure in vacuum at an elevated temperature to produce vacuum hot-pressed (VHP) blocks and vacuum hot-isostatic-pressed (HIP) forms and billets. The blocks (typically cylindrical), which are produced over a wide range of sizes (up to 183 cm dia. by 61

  4. [Publishing models in medical journals].

    PubMed

    Reyes, Humberto B

    2012-02-01

    Medical journals are published by scientific societies, universities, publishing agencies and other for-profit or non-profit organizations. The traditional way to cover the expenses in printed journals has been a "subscribers pay" model. The rise of electronic versions in the internet, either together with the printed version or replacing it entirely, plus a progressive adherence to an "open access" for electronic versions, has created financial difficulties. Therefore, the "authors pay" model has been added. Both models can be subsidized by commercial or institutional advertising, but still a main source for financing relies either in subscriptions or in authors' payments. A small source of income that helps to cover publishing costs is a "charge for manuscript reception", currently applied by several journals. Those authors whose work has institutional or external support can use their grants to cover any charges, but the situation is more difficult for those who do not have such support. Since 1872, Sociedad Médica de Santiago-Chilean Society of Internal Medicine, owner and publisher of Revista Médica de Chile, has employed the "subscribers pay" model, subsidized by commercial advertising and temporary sponsors (Chilean government and others). The printed journal is reproduced in an open access electronic version, in www.scielo.cl. The increasing cost of both publications systems demands a time for reflection.

  5. A Course in Desktop Publishing.

    ERIC Educational Resources Information Center

    Somerick, Nancy M.

    1992-01-01

    Describes "Promotional Publications," a required course for public relations majors, which teaches the basics of desktop publishing. Outlines how the course covers the preparation of publications used as communication tools in public relations, advertising, and organizations, with an emphasis upon design, layout, and technology. (MM)

  6. Publishing Research in LIS Journals

    ERIC Educational Resources Information Center

    Shenton, Andrew K.

    2005-01-01

    In contrast to the considerable coverage of research methods and report writing, relatively little attention has been given in the professional literature to the steps that should be taken and issues which may be borne in mind by a researcher seeking to have his or her work published. By addressing ten broad questions reflecting common concerns,…

  7. Library Networks and Electronic Publishing.

    ERIC Educational Resources Information Center

    Olvey, Lee D.

    1995-01-01

    Provides a description of present and proposed plans and strategies of OCLC (Online Computer Library Center) and their relationship to electronic publishing. FirstSearch (end-user access to secondary information), GUIDON (electronic journals online) and FastDoc (document delivery) are emphasized. (JKP)

  8. Government Publishing: Past to Present.

    ERIC Educational Resources Information Center

    Hernon, Peter; Relyea, Harold C.

    1995-01-01

    Provides an overview of government publishing that focuses on the United States national government. Documents the shift from paper to electronic publication and discusses implications. Highlights include public availability and access, propaganda, policy, workshops on information dissemination, preservation of electronic resources, and the…

  9. Automatic Publishing of Library Bulletins.

    ERIC Educational Resources Information Center

    Inbal, Moshe

    1980-01-01

    Describes the use of a computer to publish library bulletins that list recent accessions of technical reports according to the subject classification scheme of NTIS/SRIM (National Technical Information Service's Scientific Reports in Microfiche). The codes file, the four computer program functions, and costs/economy are discussed. (JD)

  10. Mellon Conference: Panel on "Licensing, Copyright and Fair Use." The HYPATIA Project (toward an ASCAP for Academics).

    ERIC Educational Resources Information Center

    Ginsburg, Jane C.; Janklow, Morton L.

    The HYPATIA Project envisions the creation of a digital depository and licensing and tracking service for unpublished "academic" works, including working papers, other works-in-progress, lectures, and other writings that are not normally published in formal academic journals. Any academic who wishes to deposit a work will be welcome to do so;…

  11. Heat pipe manufacturing study

    NASA Technical Reports Server (NTRS)

    Edelstein, F.

    1974-01-01

    Heat pipe manufacturing methods are examined with the goal of establishing cost effective procedures that will ultimately result in cheaper more reliable heat pipes. Those methods which are commonly used by all heat pipe manufacturers have been considered, including: (1) envelope and wick cleaning, (2) end closure and welding, (3) mechanical verification, (4) evacuation and charging, (5) working fluid purity, and (6) charge tube pinch off. The study is limited to moderate temperature aluminum and stainless steel heat pipes with ammonia, Freon-21 and methanol working fluids. Review and evaluation of available manufacturers techniques and procedures together with the results of specific manufacturing oriented tests have yielded a set of recommended cost-effective specifications which can be used by all manufacturers.

  12. Using Quality Function Deployment To Improve Academic Advising Processes.

    ERIC Educational Resources Information Center

    Barrows, Richard; Murray, Bruce

    1997-01-01

    Quality Function Deployment, a set of concepts and tools used in manufacturing engineering to link consumer needs with product design, can also improve academic advising systems and processes. The technique promotes structured, logical examination of students' advising needs and their relationship to advising system design, processes, methods,…

  13. Protecting America's secrets while maintaining academic freedom.

    PubMed

    Keel, Brooks A

    2004-04-01

    The terrorist attacks of September 11, 2001, and the subsequent anthrax mail attacks, have had a profound impact on Americans' personal and professional lives and have sparked an active debate regarding the delicate balance between the need for national security and the pursuit of academic freedom. Although academic freedom can be defined in many ways, there are four primary tenets of freedom in an academic environment: freedom to research, freedom to publish, freedom to teach, and freedom to speak. Each of these tenets has come under attack in the wake of September 11, 2001. In this report the author further defines academic freedom and reflects upon recent events that have had a real or perceived impact on this freedom, including (1) attempts to categorize and restrict some research as "sensitive," (2) implementation of export control laws and select agent regulations, (3) limitations on the publication of research findings, (4) prohibition of certain foreign nationals from collaborating with U.S. researchers and receiving education and training in U.S. colleges and universities, and (5) restraint of faculty free speech. The author offers some suggestions as to how academia might achieve a proper balance between protecting our national security while promoting and maintaining academic freedom.

  14. Protecting America's secrets while maintaining academic freedom.

    PubMed

    Keel, Brooks A

    2004-04-01

    The terrorist attacks of September 11, 2001, and the subsequent anthrax mail attacks, have had a profound impact on Americans' personal and professional lives and have sparked an active debate regarding the delicate balance between the need for national security and the pursuit of academic freedom. Although academic freedom can be defined in many ways, there are four primary tenets of freedom in an academic environment: freedom to research, freedom to publish, freedom to teach, and freedom to speak. Each of these tenets has come under attack in the wake of September 11, 2001. In this report the author further defines academic freedom and reflects upon recent events that have had a real or perceived impact on this freedom, including (1) attempts to categorize and restrict some research as "sensitive," (2) implementation of export control laws and select agent regulations, (3) limitations on the publication of research findings, (4) prohibition of certain foreign nationals from collaborating with U.S. researchers and receiving education and training in U.S. colleges and universities, and (5) restraint of faculty free speech. The author offers some suggestions as to how academia might achieve a proper balance between protecting our national security while promoting and maintaining academic freedom. PMID:15044166

  15. Statement on Publication Ethics for Editors and Publishers.

    PubMed

    Gasparyan, Armen Yuri; Yessirkepov, Marlen; Voronov, Alexander A; Gorin, Sergey V; Koroleva, Anna M; Kitas, George D

    2016-09-01

    The digitization and related developments in journal editing and publishing necessitate increasing the awareness of all stakeholders of science communication in the emerging global problems and possible solutions. Journal editors and publishers are frequently encountered with the fast-growing problems of authorship, conflicts of interest, peer review, research misconduct, unethical citations, and inappropriate journal impact metrics. While the number of erroneous and unethical research papers and wasteful, or 'predatory', journals is increasing exponentially, responsible editors are urged to 'clean' the literature by correcting or retracting related articles. Indexers are advised to implement measures for accepting truly influential and ethical journals and delisting sources with predatory publishing practices. Updating knowledge and skills of authors, editors and publishers, developing and endorsing recommendations of global editorial associations, and (re)drafting journal instructions can be viewed as potential tools for improving ethics of academic journals. The aim of this Statement is to increase awareness of all stakeholders of science communication of the emerging ethical issues in journal editing and publishing and initiate a campaign of upgrading and enforcing related journal instructions. PMID:27510376

  16. [Trends of electronic publishing in medicine and life sciences].

    PubMed

    Strelski-Waisman, Neta; Waisman, Dan

    2005-09-01

    Scientific publication in the electronic media is gaining popularity in academic libraries, research institutions and commercial organizations. The electronic journal may shorten the processes of writing and publication, decrease publication and distribution costs, and enable access from any location in the world. Electronic publications have unique advantages: it is possible to search them, to create hyperlinks to references and footnotes, as well as to information on the web and to include graphics and photographs at a very low cost. Audio, video and tri-dimensional images may also be included. Electronic publishing may also speed up review and publication processes and enable the writer to receive immediate feedback through the web. However, in spite of the advantages, there are certain points that must be considered: accessibility to previously published material is not guaranteed as databases are not always stable and coverage may change without notice. In addition, the price that commercial publishers charge for their services may be very high or be subject to the purchase of a packaged deal that may include unwanted databases. Many issues of copyright and the use of published material are not yet finalized. In this review we discuss the advantages and disadvantages of the electronic scientific publication, the feasibility of keeping appropriate quality and peer-review process, the stability and accessibility of databases managed by the publishers and the acceptance of the electronic format by scientists and clinicians. PMID:16218535

  17. Statement on Publication Ethics for Editors and Publishers.

    PubMed

    Gasparyan, Armen Yuri; Yessirkepov, Marlen; Voronov, Alexander A; Gorin, Sergey V; Koroleva, Anna M; Kitas, George D

    2016-09-01

    The digitization and related developments in journal editing and publishing necessitate increasing the awareness of all stakeholders of science communication in the emerging global problems and possible solutions. Journal editors and publishers are frequently encountered with the fast-growing problems of authorship, conflicts of interest, peer review, research misconduct, unethical citations, and inappropriate journal impact metrics. While the number of erroneous and unethical research papers and wasteful, or 'predatory', journals is increasing exponentially, responsible editors are urged to 'clean' the literature by correcting or retracting related articles. Indexers are advised to implement measures for accepting truly influential and ethical journals and delisting sources with predatory publishing practices. Updating knowledge and skills of authors, editors and publishers, developing and endorsing recommendations of global editorial associations, and (re)drafting journal instructions can be viewed as potential tools for improving ethics of academic journals. The aim of this Statement is to increase awareness of all stakeholders of science communication of the emerging ethical issues in journal editing and publishing and initiate a campaign of upgrading and enforcing related journal instructions.

  18. Statement on Publication Ethics for Editors and Publishers

    PubMed Central

    2016-01-01

    The digitization and related developments in journal editing and publishing necessitate increasing the awareness of all stakeholders of science communication in the emerging global problems and possible solutions. Journal editors and publishers are frequently encountered with the fast-growing problems of authorship, conflicts of interest, peer review, research misconduct, unethical citations, and inappropriate journal impact metrics. While the number of erroneous and unethical research papers and wasteful, or 'predatory', journals is increasing exponentially, responsible editors are urged to 'clean' the literature by correcting or retracting related articles. Indexers are advised to implement measures for accepting truly influential and ethical journals and delisting sources with predatory publishing practices. Updating knowledge and skills of authors, editors and publishers, developing and endorsing recommendations of global editorial associations, and (re)drafting journal instructions can be viewed as potential tools for improving ethics of academic journals. The aim of this Statement is to increase awareness of all stakeholders of science communication of the emerging ethical issues in journal editing and publishing and initiate a campaign of upgrading and enforcing related journal instructions. PMID:27510376

  19. The Academic Generation Gap

    ERIC Educational Resources Information Center

    Dronzek, Anna

    2008-01-01

    The current generation gap in academia is different--fundamentally shaped by the structural problems of academic employment. The job market has especially exacerbated tensions between senior and junior faculty by ratcheting up expectations and requirements at every stage of the academic career. The disparities have been mentioned often enough to…

  20. Marketing Academic Libraries

    ERIC Educational Resources Information Center

    Mallon, Melissa, Ed.

    2013-01-01

    Ask any academic librarian if marketing their library and its services is an important task, and the answer will most likely be a resounding "yes!" Particularly in economically troubled times, librarians are increasingly called upon to promote their services and defend their library's worth. Since few academic libraries have in-house marketing…

  1. Facility Focus: Academic Buildings.

    ERIC Educational Resources Information Center

    College Planning & Management, 2002

    2002-01-01

    Describes the Humanities Building at Rice University, the Health Sciences Center at Lake Sumter Community College, and the Norman S. and Lida M. Smith Academic Technology Center at Bentley College as examples of the importance of academic buildings in helping define campus image. Includes photographs. (EV)

  2. Academic Researchers Speak

    ERIC Educational Resources Information Center

    Bergom, Inger; Waltman, Jean; August, Louise; Hollenshead, Carol

    2010-01-01

    Non-tenure-track (NTT) research faculty are perhaps the most under-recognized group of academic professionals on the campuses today, despite their increasingly important role within the expanding academic research enterprise. The American Association for the Advancement of Science reports that the amount of federal spending on R&D has more than…

  3. Becoming an Academic Researcher

    ERIC Educational Resources Information Center

    Angervall, Petra; Gustafsson, Jan

    2014-01-01

    The neo-liberal restructuring of academia justifies research concerning what constitutes academic work, what it means to be an academic researcher and how researchers manoeuvre in academia. The aim of this article is to investigate how this reshaping of higher education affects how research careers are formed and impacts on "becoming…

  4. California Redefines Academic Freedom

    ERIC Educational Resources Information Center

    Trow, Martin A.

    2003-01-01

    In the spring of 2003, University of California President Richard Atkinson forwarded to the U.C. Academic Senate a proposed revision of the existing regulation bearing on how university teachers should treat contentious and disputed issues, both political and academic, in their classrooms. The existing regulation on this matter, APM-010, had been…

  5. Academic Freedom Revisited

    ERIC Educational Resources Information Center

    Doughty, Howard A.

    2010-01-01

    One of the author's enduring concerns about the concept of academic freedom is with semantics. It has seemed to him that one of the biggest difficulties with discussions of academic freedom (as with many conversations about "value-laden" terms such as "democracy," "equity," and "justice") is that people begin from different positions and with…

  6. Academic Identities under Threat?

    ERIC Educational Resources Information Center

    Clegg, Sue

    2008-01-01

    This article focuses on the lived experience of practising academics as part of an inquiry into the vexed question of "academic identities". Identity is understood not as a fixed property, but as part of the lived complexity of a person's project. The article reports on data from a small study in one university. The data suggest that academic…

  7. Arbitration in Academe.

    ERIC Educational Resources Information Center

    Douglas, Joel, Ed.

    1989-01-01

    Questions and issues critical to an understanding of arbitration in higher education are discussed. Aspects of the academic arbitration model are defined. The following four topics are examined: (1) the procedural similarities and differences between academic arbitration and the industrial model; (2) the possible inherent conflict between academic…

  8. Impulsivity and Academic Cheating

    ERIC Educational Resources Information Center

    Anderman, Eric M.; Cupp, Pamela K.; Lane, Derek

    2009-01-01

    The authors examined the relations between academic cheating and impulsivity in a large sample of adolescents enrolled in high school health education classes. Results indicated that impulsivity predicts academic cheating for students who report extensive involvement in cheating. However, students who engage in extensive cheating are less likely…

  9. The Academic Dean.

    ERIC Educational Resources Information Center

    Bowker, Lee H.

    1981-01-01

    The role of the academic dean, role conflicts, and the occupational experiences and performance of deans are considered. Role conflict for academic deans is related to clashing constituencies, role ambiguity, lack of correspondence between organization requirements and the personalities of incumbent deans, changing organizational needs over time,…

  10. Understanding Academic Confidence

    ERIC Educational Resources Information Center

    Sander, Paul; Sanders, Lalage

    2006-01-01

    This paper draws on the psychological theories of self-efficacy and the self-concept to understand students' self-confidence in academic study in higher education as measured by the Academic Behavioural Confidence scale (ABC). In doing this, expectancy-value theory and self-efficacy theory are considered and contrasted with self-concept and…

  11. Academic Freedom and Me

    ERIC Educational Resources Information Center

    Barnard, Ian

    2009-01-01

    This article presents a personal history of the author's own relationships with the concept of academic freedom. The article is subdivided into 3 prehistories, 7 incidents, 3 disjunctions, and 3 myths. The author discusses the complications of politics, culture, and academic freedom in one career.

  12. Thinking Academic Freedom

    ERIC Educational Resources Information Center

    Lange, Lis

    2016-01-01

    This lecture argues that the politicisation and instrumentalisation of the university caused by neoliberal frames has as a result the depoliticisation of knowledge and of the academic as individual. This depoliticisation has turned academic freedom into a right to disengage not only from the political fight around these issues but also from the…

  13. The Trend towards Self-Publishing.

    ERIC Educational Resources Information Center

    Hayward, Pat

    1992-01-01

    Discusses reasons for the self-publishing trend in Canada. Topics addressed include changes in the publishing industry, desktop publishing, quality control, printing, publicity, reviews, marketing, and the future of self-publishing. Two sidebars discuss vanity presses and self-publishing and libraries. (32 references) (LRW)

  14. Electrons, Electronic Publishing, and Electronic Display.

    ERIC Educational Resources Information Center

    Brownrigg, Edwin B.; Lynch, Clifford A.

    1985-01-01

    Provides a perspective on electronic publishing by distinguishing between "Newtonian" publishing and "quantum-mechanical" publishing. Highlights include media and publishing, works delivered through electronic media, electronic publishing and the printed word, management of intellectual property, and recent copyright-law issues and their…

  15. Flexible Manufacturing Systems: What's in It for the Manufacturer.

    ERIC Educational Resources Information Center

    Chowdhury, A. R.; Peckman, Donald C.

    1987-01-01

    The authors define the Flexible Manufacturing System and outline its history. They describe what the processing time includes and provide advantages and disadvantages of Flexible Manufacturing Systems compared to conventional manufacturing. (CH)

  16. A survey of authors publishing in four megajournals.

    PubMed

    Solomon, David J

    2014-01-01

    Aim. To determine the characteristics of megajournal authors, the nature of the manuscripts they are submitting to these journals, factors influencing their decision to publish in a megajournal, sources of funding for article processing charges (APCs) or other fees and their likelihood of submitting to a megajournal in the future. Methods. Web-based survey of 2,128 authors who recently published in BMJ Open, PeerJ, PLOS ONE or SAGE Open. Results. The response rate ranged from 26% for BMJ Open to 47% for SAGE Open. The authors were international, largely academics who had recently published in both subscription and Open Access (OA) journals. Across journals about 25% of the articles were preliminary findings and just under half were resubmissions of manuscripts rejected by other journals. Editors from other BMJ journals and perhaps to a lesser extent SAGE and PLOS journals appear to be encouraging authors to submit manuscripts that were rejected by the editor's journals to a megajournal published by the same publisher. Quality of the journal and speed of the review process were important factors across all four journals. Impact factor was important for PLOS ONE authors but less so for BMJ Open authors, which also has an impact factor. The review criteria and the fact the journal was OA were other significant factors particularly important for PeerJ authors. The reputation of the publisher was an important factor for SAGE Open and BMJ Open. About half of PLOS ONE and around a third of BMJ Open and PeerJ authors used grant funding for publishing charges while only about 10% of SAGE Open used grant funding for publication charges. Around 60% of SAGE Open and 32% of PeerJ authors self-funded their publication fees however the fees are modest for these journals. The majority of authors from all 4 journals were pleased with their experience and indicated they were likely to submit to the same or similar journal in the future. Conclusions. Megajournals are drawing an

  17. A survey of authors publishing in four megajournals.

    PubMed

    Solomon, David J

    2014-01-01

    Aim. To determine the characteristics of megajournal authors, the nature of the manuscripts they are submitting to these journals, factors influencing their decision to publish in a megajournal, sources of funding for article processing charges (APCs) or other fees and their likelihood of submitting to a megajournal in the future. Methods. Web-based survey of 2,128 authors who recently published in BMJ Open, PeerJ, PLOS ONE or SAGE Open. Results. The response rate ranged from 26% for BMJ Open to 47% for SAGE Open. The authors were international, largely academics who had recently published in both subscription and Open Access (OA) journals. Across journals about 25% of the articles were preliminary findings and just under half were resubmissions of manuscripts rejected by other journals. Editors from other BMJ journals and perhaps to a lesser extent SAGE and PLOS journals appear to be encouraging authors to submit manuscripts that were rejected by the editor's journals to a megajournal published by the same publisher. Quality of the journal and speed of the review process were important factors across all four journals. Impact factor was important for PLOS ONE authors but less so for BMJ Open authors, which also has an impact factor. The review criteria and the fact the journal was OA were other significant factors particularly important for PeerJ authors. The reputation of the publisher was an important factor for SAGE Open and BMJ Open. About half of PLOS ONE and around a third of BMJ Open and PeerJ authors used grant funding for publishing charges while only about 10% of SAGE Open used grant funding for publication charges. Around 60% of SAGE Open and 32% of PeerJ authors self-funded their publication fees however the fees are modest for these journals. The majority of authors from all 4 journals were pleased with their experience and indicated they were likely to submit to the same or similar journal in the future. Conclusions. Megajournals are drawing an

  18. Rapid small lot manufacturing

    SciTech Connect

    Harrigan, R.W.

    1998-05-09

    The direct connection of information, captured in forms such as CAD databases, to the factory floor is enabling a revolution in manufacturing. Rapid response to very dynamic market conditions is becoming the norm rather than the exception. In order to provide economical rapid fabrication of small numbers of variable products, one must design with manufacturing constraints in mind. In addition, flexible manufacturing systems must be programmed automatically to reduce the time for product change over in the factory and eliminate human errors. Sensor based machine control is needed to adapt idealized, model based machine programs to uncontrolled variables such as the condition of raw materials and fabrication tolerances.

  19. Facilitating Novice Researchers in Project Publishing during the Doctoral Years and Beyond: A Hong Kong-Based Study

    ERIC Educational Resources Information Center

    Kwan, Becky Siu Chu

    2013-01-01

    This article examines the existing training that a group of supervisors in Hong Kong provide for their PhD students in helping them publish during their doctoral studies, and preparing them for the publishing demands in the early phase of their academic careers. The supervisors were interviewed about the types of training they provided for their…

  20. Does Academic Work Make Australian Academics Happy?

    ERIC Educational Resources Information Center

    Duncan, Roderick; Tilbrook, Kerry; Krivokapic-Skoko, Branka

    2015-01-01

    Happiness research is a rapidly-growing area in social psychology and has emphasised the link between happiness and workplace productivity and creativity for knowledge workers. Recent articles in this journal have raised concerns about the level of happiness and engagement of Australian academics with their work, however there is little research…

  1. Reengineering Academic Medical Centers: Reengineering Academic Values?

    ERIC Educational Resources Information Center

    Korn, David

    1996-01-01

    Discussion of academic medical centers (AMCs) looks at: change due to heavy federal funding in recent decades; adverse consequences, including deemphasis on education in favor of research and clinical service delivery, and discrepancies between AMC internal and external labor markets; and challenges to medical education in research, education, and…

  2. The Ethical Academic: Academics as Public Intellectuals

    ERIC Educational Resources Information Center

    Parsons, Jim

    2013-01-01

    Twenty-five years ago, American sociologist Robert Neelly Bellah (Bellah, et al., 1986: 303) critiqued the growing isolation of intellectuals within universities and called for a return to "social science as public philosophy." Little seems to have changed. My thirty-seven year experience at the University of Alberta suggests that academics see…

  3. How to write an article: Preparing a publishable manuscript!

    PubMed

    Shidham, Vinod B; Pitman, Martha B; Demay, Richard M

    2012-01-01

    Most of the scientific work presented as abstracts (platforms and posters) at various conferences have the potential to be published as articles in peer-reviewed journals. This DIY (Do It Yourself) article on how to achieve that goal is an extension of the symposium presented at the 36(th) European Congress of Cytology, Istanbul, Turkey (presentation available on net at http://alturl.com/q6bfp). The criteria for manuscript authorship should be based on the ICMJE (International Committee of Medical Journal Editors) Uniform Requirements for Manuscripts. The next step is to choose the appropriate journal to submit the manuscript and review the 'Instructions to the authors' for that journal. Although initially it may appear to be an insurmountable task, diligent organizational discipline with a little patience and perseverance with input from mentors should lead to the preparation of a nearly perfect publishable manuscript even by a novice. Ultimately, the published article is an excellent track record of academic productivity with contribution to the general public good by encouraging the exchange of experience and innovation. It is a highly rewarding conduit to the personal success and growth leading to the collective achievement of continued scientific progress. Recent emergences of journals and publishers offering the platform and opportunity to publish under an open access charter provides the opportunity for authors to protect their copyright from being lost to conventional publishers. Publishing your work on this open platform is the most rewarding mission and is the recommended option in the current modern era.[This open access article can be linked (copy-paste link from HTML version of this article) or reproduced FREELY if original reference details are prominently identifiable].

  4. How to write an article: Preparing a publishable manuscript!

    PubMed Central

    Shidham, Vinod B.; Pitman, Martha B.; DeMay, Richard M.

    2012-01-01

    Most of the scientific work presented as abstracts (platforms and posters) at various conferences have the potential to be published as articles in peer-reviewed journals. This DIY (Do It Yourself) article on how to achieve that goal is an extension of the symposium presented at the 36th European Congress of Cytology, Istanbul, Turkey (presentation available on net at http://alturl.com/q6bfp). The criteria for manuscript authorship should be based on the ICMJE (International Committee of Medical Journal Editors) Uniform Requirements for Manuscripts. The next step is to choose the appropriate journal to submit the manuscript and review the ‘Instructions to the authors’ for that journal. Although initially it may appear to be an insurmountable task, diligent organizational discipline with a little patience and perseverance with input from mentors should lead to the preparation of a nearly perfect publishable manuscript even by a novice. Ultimately, the published article is an excellent track record of academic productivity with contribution to the general public good by encouraging the exchange of experience and innovation. It is a highly rewarding conduit to the personal success and growth leading to the collective achievement of continued scientific progress. Recent emergences of journals and publishers offering the platform and opportunity to publish under an open access charter provides the opportunity for authors to protect their copyright from being lost to conventional publishers. Publishing your work on this open platform is the most rewarding mission and is the recommended option in the current modern era. [This open access article can be linked (copy-paste link from HTML version of this article) or reproduced FREELY if original reference details are prominently identifiable]. PMID:22363390

  5. Agile manufacturing concept

    NASA Astrophysics Data System (ADS)

    Goldman, Steven L.

    1994-03-01

    The initial conceptualization of agile manufacturing was the result of a 1991 study -- chaired by Lehigh Professor Roger N. Nagel and California-based entrepreneur Rick Dove, President of Paradigm Shifts, International -- of what it would take for U.S. industry to regain global manufacturing competitiveness by the early twenty-first century. This industry-led study, reviewed by senior management at over 100 companies before its release, concluded that incremental improvement of the current system of manufacturing would not be enough to be competitive in today's global marketplace. Computer-based information and production technologies that were becoming available to industry opened up the possibility of an altogether new system of manufacturing, one that would be characterized by a distinctive integration of people and technologies; of management and labor; of customers, producers, suppliers, and society.

  6. Computers in Manufacturing.

    ERIC Educational Resources Information Center

    Hudson, C. A.

    1982-01-01

    Advances in factory computerization (computer-aided design and computer-aided manufacturing) are reviewed, including discussions of robotics, human factors engineering, and the sociological impact of automation. (JN)

  7. [Acupuncture clinical trials published in high impact factor journals].

    PubMed

    Hu, Min; Liu, Jian-Ping; Wu, Xiao-Ke

    2014-12-01

    Acupuncture clinical trials are designed to provide reliable evidence of clinical efficacy, and SCI papers is one of the high-quality clinical efficacy of acupuncture research. To analyze these papers published in high impact factor journals on acupuncture clinical trials, we can study clinical trials from design to implementation, the efficacy of prevention and cure, combined with international standard practices to evaluate the effectiveness and safety of acupuncture. That is the core of acupuncture clinical trials, as well as a prerequisite for outstanding academic output. A scientific and complete acupuncture clinical trial should be topically novel, designed innovative, logically clear, linguistically refining, and the most important point lies in a great discovery and solving the pragmatic problem. All of these are critical points of papers to be published in high impact factor journal, and directly affect international evaluation and promotion of acupuncture.

  8. BJPsych Bulletin author mentoring scheme - helping trainees become published authors.

    PubMed

    Pimm, Jonathan; Galbraith, Niall

    2016-02-01

    The publishing world is changing rapidly. Innovations include the move to open access, the rise of social media and the transition to digitalisation. In the light of these developments and with ever-increasing pressures on early career psychiatrists and trainees to publish papers in journals with a recognised pedigree, the BJPsych Bulletin is piloting an author mentoring scheme. Mentors will help clinicians and aspiring academics develop articles from a pedestrian manuscript to one that will hopefully provoke important debate and aid changes in current practices. The scheme will run on a trial basis for approximately 12 months and will then be reviewed. Mentoring has been found to have an important effect of research output including publication and grant success; the hope is that this new initiative at the BJPsych Bulletin will result in such dividends to all involved. PMID:26958356

  9. BJPsych Bulletin author mentoring scheme - helping trainees become published authors.

    PubMed

    Pimm, Jonathan; Galbraith, Niall

    2016-02-01

    The publishing world is changing rapidly. Innovations include the move to open access, the rise of social media and the transition to digitalisation. In the light of these developments and with ever-increasing pressures on early career psychiatrists and trainees to publish papers in journals with a recognised pedigree, the BJPsych Bulletin is piloting an author mentoring scheme. Mentors will help clinicians and aspiring academics develop articles from a pedestrian manuscript to one that will hopefully provoke important debate and aid changes in current practices. The scheme will run on a trial basis for approximately 12 months and will then be reviewed. Mentoring has been found to have an important effect of research output including publication and grant success; the hope is that this new initiative at the BJPsych Bulletin will result in such dividends to all involved.

  10. Manufacturing information system

    NASA Astrophysics Data System (ADS)

    Allen, D. K.; Smith, P. R.; Smart, M. J.

    1983-12-01

    The size and cost of manufacturing equipment has made it extremely difficult to perform realistic modeling and simulation of the manufacturing process in university research laboratories. Likewise the size and cost factors, coupled with many uncontrolled variables of the production situation has even made it difficult to perform adequate manufacturing research in the industrial setting. Only the largest companies can afford manufacturing research laboratories; research results are often held proprietary and seldom find their way into the university classroom to aid in education and training of new manufacturing engineers. It is the purpose for this research to continue the development of miniature prototype equipment suitable for use in an integrated CAD/CAM Laboratory. The equipment being developed is capable of actually performing production operations (e.g. drilling, milling, turning, punching, etc.) on metallic and non-metallic workpieces. The integrated CAD/CAM Mini-Lab is integrating high resolution, computer graphics, parametric design, parametric N/C parts programmings, CNC machine control, automated storage and retrieval, with robotics materials handling. The availability of miniature CAD/CAM laboratory equipment will provide the basis for intensive laboratory research on manufacturing information systems.

  11. IBM, Elsevier Science, and academic freedom.

    PubMed

    Bailar, John C; Cicolella, Andre; Harrison, Robert; LaDou, Joseph; Levy, Barry S; Rohm, Timothy; Teitelbaum, Daniel T; Wang, Yung-Der; Watterson, Andrew; Yoshida, Fumikazu

    2007-01-01

    Elsevier Science refused to publish a study of IBM workers that IBM sought to keep from public view. Occupational and environmental health (OEH) suffers from the absence of a level playing field on which science can thrive. Industry pays for a substantial portion of OEH research. Studies done by private consulting firms or academic institutions may be published if the results suit the sponsoring companies, or they may be censored. OEH journals often reflect the dominance of industry influence on research in the papers they publish, sometimes withdrawing or modifying papers in line with industry and advertising agendas. Although such practices are widely recognized, no fundamental change is supported by government and industry or by professional organizations.

  12. Publishing integrity and good practices in editing in biomedicine.

    PubMed

    Polenakovic, Momir; Gucev, Zoran

    2014-01-01

    The Macedonian Academy of Sciences and Arts (MASA), held a scientific workshop for journal editors in biomedicine: "Publishing integrity and good practices in editing in biomedicine" on April 25, 2014 in MASA, Skopje. The meeting looked into old problems and new situations in editing and publishing, with emphasis on the situation in developing countries. This global knowledge-based society is founded on the results obtained from scientific research. The data from basic research in developed countries contribute in a quite substantial manner to the newly added economic value. One of the main reasons for underdevelopment in South Eastern Europe (SEE) is certainly a low or non-existent contribution of scientific research in the newly added economic value. This has largely to do with the perception of the political elites which simply lack the insight on the crucial importance of science in development. In the long term this leads to societies in which there are distortions in the understanding of the most basic values. Academic publishing has experienced tremendous growth: so far there are at least 50 million scientific articles. Interestingly, publishing in developing countries has experienced a rate of growth higher than in developed countries. However, this is not the case with the Balkan countries. The meeting looked at some old and some newly emerging problems in editing and publishing. First, the high cost for universities and researchers to purchase journals adversely affects both publishing and editing. In developing countries the high cost of purchasing scientific literature is an almost insurmountable problem in spite of the fact that some publishing companies offer discounted fees. Open access journals in South Eastern European (SEE) countries are hardly achievable as this also incurs costs that have to be covered in some way or other. The peer review process has the fundamental difficulty that reviewers are in the situation of a Procrustean bed, tending to

  13. Publishing integrity and good practices in editing in biomedicine.

    PubMed

    Polenakovic, Momir; Gucev, Zoran

    2014-01-01

    The Macedonian Academy of Sciences and Arts (MASA), held a scientific workshop for journal editors in biomedicine: "Publishing integrity and good practices in editing in biomedicine" on April 25, 2014 in MASA, Skopje. The meeting looked into old problems and new situations in editing and publishing, with emphasis on the situation in developing countries. This global knowledge-based society is founded on the results obtained from scientific research. The data from basic research in developed countries contribute in a quite substantial manner to the newly added economic value. One of the main reasons for underdevelopment in South Eastern Europe (SEE) is certainly a low or non-existent contribution of scientific research in the newly added economic value. This has largely to do with the perception of the political elites which simply lack the insight on the crucial importance of science in development. In the long term this leads to societies in which there are distortions in the understanding of the most basic values. Academic publishing has experienced tremendous growth: so far there are at least 50 million scientific articles. Interestingly, publishing in developing countries has experienced a rate of growth higher than in developed countries. However, this is not the case with the Balkan countries. The meeting looked at some old and some newly emerging problems in editing and publishing. First, the high cost for universities and researchers to purchase journals adversely affects both publishing and editing. In developing countries the high cost of purchasing scientific literature is an almost insurmountable problem in spite of the fact that some publishing companies offer discounted fees. Open access journals in South Eastern European (SEE) countries are hardly achievable as this also incurs costs that have to be covered in some way or other. The peer review process has the fundamental difficulty that reviewers are in the situation of a Procrustean bed, tending to

  14. GEM detector conductor manufacturing experience

    SciTech Connect

    Martovetsky, N.N.; Pace, J.R.; Reardon, P.J.; Richied, D.E.; Camille, R.J.; Marston, P.G.; Smith, B.A.; Deis, G.A.; Bohanan, J.S.; Gertsen, J.H.

    1994-10-07

    Feasibility studies and manufacturing experience on the GEM Magnet superconductor are presented, including all components - NbTi strand, cable, conduit manufacture, cable pulling, and aluminum sheath application.

  15. An Academic Curriculum Will Close the Academic Achievement Gap

    ERIC Educational Resources Information Center

    Palumbo, Anthony; Kramer-Vida, Louisa

    2012-01-01

    America's unyielding academic achievement gap has been a national priority for a long time; yet, some schools have succeeded with academically disadvantaged youth. Usually, these institutions embrace a culture of success and follow an academic curriculum that is grounded in core knowledge and scholastic vocabulary. Academically disadvantaged…

  16. Academic Capitalism and Academic Culture: A Case Study

    ERIC Educational Resources Information Center

    Mendoza, Pilar; Berger, Joseph B.

    2008-01-01

    This case study investigated the impact of academic capitalism on academic culture by examining the perspectives of faculty members in an American academic department with significant industrial funding. The results of this study indicate that faculty members believe that the broad integrity of the academic culture remains unaffected in this…

  17. Academic freedom and academic-industry relationships in biotechnology.

    PubMed

    Streiffer, Robert

    2006-06-01

    Commercial academic-industry relationships (AIRs) are widespread in biotechnology and have resulted in a wide array of restrictions on academic research. Objections to such restrictions have centered on the charge that they violate academic freedom. I argue that these objections are almost invariably unsuccessful. On a consequentialist understanding of the value of academic freedom, they rely on unfounded empirical claims about the overall effects that AIRs have on academic research. And on a rights-based understanding of the value of academic freedom, they rely on excessively lavish assumptions about the kinds of activities that academic freedom protects.

  18. Textbook Publishers' Website Objective Question Banks: Does Their Use Improve Students' Examination Performance?

    ERIC Educational Resources Information Center

    Johnston, Scott Paul; Huczynski, Andrzej

    2006-01-01

    This article presents the findings of a survey of students' usage of the objective question bank section of an academic publisher's textbook website. The findings are based on a survey of 239 business and management undergraduates conducted using a quantitative research methodology. The results suggest that increased use of the objective question…

  19. Shifting Boundaries of Intellectual Property: Authors and Publishers Negotiating the WWW.

    ERIC Educational Resources Information Center

    Latchaw, Joan S.; Galin, Jeffrey R.

    1998-01-01

    Offers a broad survey of the ways the World Wide Web has changed power relationships between academic authors and publishers. Argues that the emerging innovative methods of text distribution and attribution are challenging the way knowledge itself is produced and distributed within particular disciplines. Retheorizes the relationship between…

  20. 75 FR 104 - Manufacturing & Services' Sustainable Manufacturing Initiative; Update

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-04

    ... International Trade Administration Manufacturing & Services' Sustainable Manufacturing Initiative; Update ACTION: Notice and request for input on proposed new areas of work for the Sustainable Manufacturing Initiative... (ITA) Manufacturing & Services Unit held a Sustainability and U.S. Competitiveness Summit on October...

  1. National Center for Manufacturing Sciences: Environmentally conscious manufacturing

    NASA Technical Reports Server (NTRS)

    Vinton, Clare

    1995-01-01

    The purpose of this presentation is to share the results and some of the thinking of the Environmentally Conscious Manufacturing - Strategic Initiative Group (ECM-SIG) at the National Center for Manufacturing Sciences (NCMS). NCMS is a consortium of more than 185 North American Manufacturing organizations comprised of about 75 percent for profit manufacturing companies and about 25 percent nonprofit organizations that support manufacturing activities. NCMS conducts collaborative R&D programs designed to improve global competitiveness of its members and other North American manufacturers to address common issues that are important to manufacturing industries. NCMS is an industry driven organization whose agenda is established by industry with input from appropriate government agencies.

  2. The Once and Future Publishing Library

    ERIC Educational Resources Information Center

    Okerson, Ann; Holzman, Alex

    2015-01-01

    The report explores the revitalization of library publishing and its possible future, and examines elements that influence the success and sustainability of library publishing initiatives. The authors trace the history of library publishing and factors that have transformed the publishing landscape, and describe several significant library-press…

  3. How to Publish without Financially Perishing

    ERIC Educational Resources Information Center

    Mock, Rodney P.; Savage, Arline; Simkin, Mark G.

    2011-01-01

    Publication agreements vary by publisher and sometimes by contract as well. A number of such agreements now also include indemnity clauses. "Indemnifying a publisher" means agreeing to pay for any loss, damage, or liability incurred by the publisher, or it can mean that the publisher has the right to claim reimbursement for its loss, damage, or…

  4. Self-Published Books: An Empirical "Snapshot"

    ERIC Educational Resources Information Center

    Bradley, Jana; Fulton, Bruce; Helm, Marlene

    2012-01-01

    The number of books published by authors using fee-based publication services, such as Lulu and AuthorHouse, is overtaking the number of books published by mainstream publishers, according to Bowker's 2009 annual data. Little empirical research exists on self-published books. This article presents the results of an investigation of a random sample…

  5. Writing and Publishing: The Librarian's Handbook

    ERIC Educational Resources Information Center

    Smallwood, Carol, Ed.

    2010-01-01

    Have you ever considered writing or reviewing for the library community? Are you interested in publishing a book on your favorite author or hobby? Do you need to write and publish for tenure? If so, "Writing and Publishing" is for you. Practical how-to guidance covering fiction, poetry, children's books/magazines, self-publishing, literary agents,…

  6. Is There an "Academic Vocabulary"?

    ERIC Educational Resources Information Center

    Hyland, Ken; Tse, Polly

    2007-01-01

    This article considers the notion of "academic vocabulary": the assumption that students of English for academic purposes (EAP) should study a core of high frequency words because they are common in an English academic register. We examine the value of the term by using Cox-head's (2000) Academic Word List (AWL) to explore the distribution of its…

  7. The Rewards of Academic Leadership

    ERIC Educational Resources Information Center

    Murphy, Christina

    2003-01-01

    Recent studies of academic leadership confirm what many academic leaders know from personal experience: academic leadership is a complex and demanding role with significant stress and high burnout and turnover rates (Brown, 2002; Brown and Moshavi, 2002). In the light of these issues, an exploration of the nature of academic leadership and its…

  8. Academic Freedom and Organisational Identity.

    ERIC Educational Resources Information Center

    Tierney, William G.

    2001-01-01

    Summarizes prominent current arguments on academic freedom's endangerment by managerialism and discusses their limitations. Defines a new vision of academic freedom informed by thinking on globalization. Presents findings from interviews with Australian faculty about academic freedom and discusses ways to ensure that academic freedom endures in…

  9. Academic Writing and Tacit Knowledge

    ERIC Educational Resources Information Center

    Elton, Lewis

    2010-01-01

    The genre of academic writing is discipline dependent, so that neither specialists in academic writing nor practising academics in a discipline can, independently of each other, provide students with the necessary help to develop the ability to write in their academic disciplines. Furthermore, the rules are largely tacit, i.e. they are not…

  10. The Influence of Daily Structured Physical Activity on Academic Progress of Elementary Students with Intellectual Disabilities

    ERIC Educational Resources Information Center

    Everhart, Brett; Dimon, Chelsea; Stone, Danielle; Desmond, Deborah; Casilio, Mary

    2012-01-01

    Recent evidence suggests regular physical activity can positively influence academic performance. Although, little has been published on physical activity's impact on academic performance of students with intellectual disabilities, research shows the impact on brain and cognitive function of movement and physical activity. In this study, seven…

  11. The Case of the Disappearing E-Book: Academic Libraries and Subscription Packages

    ERIC Educational Resources Information Center

    Georgas, Helen

    2015-01-01

    One of the standard models for e-book licensing in academic libraries is the subscription package. This study is a one-year analysis of "disappeared" titles from ebrary's Academic Complete™ collection. During 2013, 3462 titles were deleted. Deleted titles were mainly recent publications (published within the last ten years), with a high…

  12. Can Low-Cost Support Programmes with Coaching Accelerate Doctoral Completion in Health Science Faculty Academics?

    ERIC Educational Resources Information Center

    Geber, Hilary; Bentley, Alison

    2012-01-01

    Career development for full-time Health Sciences academics through to doctoral studies is a monumental task. Many academics have difficulty completing their studies in the minimum time as well as publishing after obtaining their degree. As this problem is particularly acute in the Health Sciences, the PhD Acceleration Programme in Health Sciences…

  13. Research Success and Structured Support: Developing Early Career Academics in Higher Education

    ERIC Educational Resources Information Center

    Geber, H.

    2009-01-01

    Entry into a successful academic career is often an arduous process. From career preparation through to doctoral studies and beyond, the journey can be fraught with trials. Why do many academics find difficulty in completing their studies in the minimum time and publishing afterwards? As the University of the Witwatersrand has a strategic goal of…

  14. Video Self-Modeling to Improve Academic Performance: A Literature Review

    ERIC Educational Resources Information Center

    Prater, Mary Anne; Carter, Nari; Hitchcock, Caryl; Dowrick, Peter

    2012-01-01

    Video self-modeling (VSM) has been used for decades to effectively improve individuals' behaviors and skills. The purpose of this review is to locate and analyze published studies that used VSM for typical school-based academic skills to determine the effect of VSM interventions on students' academic performance. Only eight studies were located…

  15. Assessing Academic Outcomes at the United States Coast Guard Academy: The Role of Student Attitudes.

    ERIC Educational Resources Information Center

    Rezendes, George J.; Gable, Robert K.

    This paper discusses the efforts of the Department of Mathematics at the United States Coast Guard Academy (USCGA) to determine the degree to which their courses support the published academic outcomes of the institution, and presents the results of a survey of student attitudes toward the academic outcomes. A survey questionnaire was developed…

  16. A Non-Residential Alternative to off Campus Writers' Retreats for Academics

    ERIC Educational Resources Information Center

    Dickson-Swift, Virginia; James, Erica L.; Kippen, Sandra; Talbot, Lyn; Verrinder, Glenda; Ward, Bernadette

    2009-01-01

    Changes in the higher education sector over the past decade have led to increasing demands on academics and resulted in increasing workloads, longer work hours and increased workplace stress. Declining government commitment to university funding has placed increasing pressure on academics to attract research funding and to publish. In addition, an…

  17. Psst, Have You Ever Cheated? A Study of Academic Dishonesty in Sweden

    ERIC Educational Resources Information Center

    Trost, Kari

    2009-01-01

    It has been reported that academic dishonesty is a prevalent problem that crosses all disciplines at the university level. But, how prevalent is it in Sweden? Little is published in the literature about lying, cheating, and plagiarism amongst Swedish university students. This paper focuses on the frequency of past specific academically dishonest…

  18. Academic Freedom: A Guide to the Literature. Bibliographies and Indexes in Education, Number 20.

    ERIC Educational Resources Information Center

    Aby, Stephen H., Comp.; Kuhn, James C., IV, Comp.

    This guide provides descriptive annotations of 481 sources relevant to the topic of academic freedom. The focus is on postsecondary education in the United States and on items published after 1940, although some entries are for earlier sources. Sources are grouped by category into these chapters: (1) "Academic Freedom--Philosophy"; (2) "Academic…

  19. Web 2.0 Authorship: Issues of Referencing and Citation for Academic Integrity

    ERIC Educational Resources Information Center

    Gray, Kathleen; Thompson, Celia; Clerehan, Rosemary; Sheard, Judithe; Hamilton, Margaret

    2008-01-01

    Web 2.0 authoring forms such as wikis and blogs, social bookmarking, and audio and video podcasting pose a challenge to academic authorship traditions. This paper reviews the provisions made in major academic referencing and citation style guides for acknowledging content and ideas that may be published using these new web authoring forms. It…

  20. Practical Applications as a Source of Credibility: A Comparison of Three Fields of Dutch Academic Chemistry

    ERIC Educational Resources Information Center

    Hessels, Laurens K.; van Lente, Harro

    2011-01-01

    In many Western science systems, funding structures increasingly stimulate academic research to contribute to practical applications, but at the same time the rise of bibliometric performance assessments have strengthened the pressure on academics to conduct excellent basic research that can be published in scholarly literature. We analyze the…

  1. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  2. The academic generalist: an endangered species revived.

    PubMed

    Haggerty, R J

    1990-09-01

    The role of a generalist in academic medicine has been diminished because of the proliferation of specialized research and treatment in the hands of the subspecialist. Yet many observers believe that this has resulted in gaps in research and teaching concerning common health problems, especially those seen in office practice. To correct this trend, The Robert Wood Johnson Foundation has supported for 10 years a fellowship program to prepare academic pediatric generalists. A total of 111 pediatricians have completed the fellowship. Two thirds are now in full-time academic positions. By late 1988, they had published 332 papers and had received more than $20 million in grant support. A majority of departments of pediatrics have relabeled their divisions of ambulatory pediatrics as divisions of general pediatrics and have broadened these divisions' responsibilities. In spite of some difficulty obtaining research support, the carers of these fellows and the changes in pediatric departments support the thesis that there is a need for and a rebirth of academic general pediatrics. PMID:2136247

  3. JGR to publish LPSC Proceedings

    NASA Astrophysics Data System (ADS)

    AGU will publish the Proceedings of the Lunar and Planetary Science Conference (LPSC), organized by the Lunar and Planetary Institute (LPI), as a special supplement to the Red section of the Journal of Geophysical Research. The conference, being held this week in Houston, Tex., is sponsored by LPI, the Johnson Space Center, and AGU. The present 39-member board of JGR-Red associate editors will be expanded to account for the handling of the increased number of papers in petrology and geochemistry.William Boynton has accepted a 1-year special assignment as Proceedings Editor and will work in concert with JGR-Red Editor Thomas Ahrens. In addition, the regular JGR-Red board of associate editors has been expanded to include Boynton, Michael J. Drake, Richard A.F. Grieve, John F. Kerridge, Guenter W. Lugmair, James Papike, Robert O. Pepin, and Heinrich Wönke.

  4. 78 FR 67117 - Manufacturing Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-08

    ... International Trade Administration Manufacturing Council AGENCY: International Trade Administration, U.S. Department of Commerce. ACTION: Notice of an Opportunity to Apply for Membership on the Manufacturing Council.... manufacturing industry to fill five vacant positions on the Manufacturing Council (Council). The purpose of...

  5. Environmentally sound manufacturing

    NASA Technical Reports Server (NTRS)

    Caddy, Larry A.; Bowman, Ross; Richards, Rex A.

    1994-01-01

    The NASA/Thiokol/industry team has developed and started implementation of an environmentally sound manufacturing plan for the continued production of solid rocket motors. They have worked with other industry representatives and the U.S. Environmental Protection Agency to prepare a comprehensive plan to eliminate all ozone depleting chemicals from manufacturing processes and to reduce the use of other hazardous materials used to produce the space shuttle reusable solid rocket motors. The team used a classical approach for problem solving combined with a creative synthesis of new approaches to attack this problem. As our ability to gather data on the state of the Earth's environmental health increases, environmentally sound manufacturing must become an integral part of the business decision making process.

  6. Environmentally sound manufacturing

    NASA Astrophysics Data System (ADS)

    Caddy, Larry A.; Bowman, Ross; Richards, Rex A.

    The NASA/Thiokol/industry team has developed and started implementation of an environmentally sound manufacturing plan for the continued production of solid rocket motors. They have worked with other industry representatives and the U.S. Environmental Protection Agency to prepare a comprehensive plan to eliminate all ozone depleting chemicals from manufacturing processes and to reduce the use of other hazardous materials used to produce the space shuttle reusable solid rocket motors. The team used a classical approach for problem solving combined with a creative synthesis of new approaches to attack this problem. As our ability to gather data on the state of the Earth's environmental health increases, environmentally sound manufacturing must become an integral part of the business decision making process.

  7. ATS materials/manufacturing

    SciTech Connect

    Karnitz, M.A.; Wright, I.G.; Ferber, M.K.

    1997-11-01

    The Materials/Manufacturing Technology subelement is a part of the base technology portion of the Advanced Turbine Systems (ATS) Program. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. The projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single crystal airfoil manufacturing technologies, materials characterization, and technology information exchange. This paper presents highlights of the activities during the past year. 12 refs., 24 figs., 4 tabs.

  8. Manufacturing and producibility technology

    NASA Technical Reports Server (NTRS)

    Hankins, J. D.; Dreshfield, R. L.

    1985-01-01

    Activities of the manufacturing/producibility working group within the Advanced High-Pressure O2/H2 Technology Program are summarized. The objectives of the M/P working group are: to develop and evaluate process and manufacturing techniques for advanced propulsion hardware design and selected materials; and to optimize the producibility of (SSME) components and assemblies by improved performance, increased life, greater reliability, and/or reduced cost. The technologies being developed include: plasma arc, laser, and inertia welding; combustion chamber and turbine blade coatings; coating processes; high performance alloy electroforming; and process control technology.

  9. Photovoltaic manufacturing technology

    SciTech Connect

    Wohlgemuth, J.H.; Whitehouse, D.; Wiedeman, S.; Catalano, A.W.; Oswald, R. )

    1991-12-01

    This report identifies steps leading to manufacturing large volumes of low-cost, large-area photovoltaic (PV) modules. Both crystalline silicon and amorphous silicon technologies were studied. Cost reductions for each step were estimated and compared to Solarex Corporation's manufacturing costs. A cost model, a simple version of the SAMICS methodology developed by the Jet Propulsion Laboratory (JPL), projected PV selling prices. Actual costs of materials, labor, product yield, etc., were used in the cost model. The JPL cost model compared potential ways of lowering costs. Solarex identified the most difficult technical challenges that, if overcome, would reduce costs. Preliminary research plans were developed to solve the technical problems. 13 refs.

  10. Serial Killers: Academic Libraries Respond to Soaring Costs.

    ERIC Educational Resources Information Center

    McCarthy, Paul

    1994-01-01

    Discusses ways in which academic libraries are responding to rising costs of serials. Topics addressed include pricing by publishers; the effect of journal cancellations on research activities; interlibrary loans and document delivery services; coordinated cancelling; electronic journals; and experiences at the University of Arizona. (LRW)

  11. Why Academics Have a Hard Time Writing Good Grant Proposals

    ERIC Educational Resources Information Center

    Porter, Robert

    2007-01-01

    When they are new to the grant game, even scholars with fine publishing records can struggle with proposal writing. Many are surprised to find that the writing style that made them successful as academics is not well suited to crafting a winning proposal. To succeed at grant writing, most researchers need to learn a new set of writing skills. This…

  12. Digital Documents and the Future of the Academic Community.

    ERIC Educational Resources Information Center

    Lyman, Peter

    This paper examines the dynamics of change in scholarly publishing and the impact of technological innovation upon the academic community for which the system of scholarly communication serves as an infrastructure. For the purposes of this discussion, what is of immediate interest is the way the productivity issue frames the possible dimensions of…

  13. The Impact of Physically Embedded Librarianship on Academic Departments

    ERIC Educational Resources Information Center

    O'Toole, Erin; Barham, Rebecca; Monahan, Jo

    2016-01-01

    Academic librarians have been engaged in embedded librarianship for nearly 15 years, yet there are few published research studies on the impact of physically embedded librarians, who work alongside departmental faculty. This study leveraged a change in reference service to analyze what happened when subject librarians moved from the library…

  14. Research Publication as a Strategy to Improve International Academic Ranking

    ERIC Educational Resources Information Center

    Tie, Fatt Hee

    2012-01-01

    Many universities in Asia are now focused on enhancing their global academic competitiveness. Various strategies are implemented to restructure, reform and transform universities aimed at improving ranking in the global university league. One significant strategy is to encourage academicians to place priority on publishing in high-impact…

  15. Strategies and Tactics in Academic Knowledge Production by Multilingual Scholars

    ERIC Educational Resources Information Center

    Curry, Mary Jane; Lillis, Theresa M.

    2014-01-01

    In the past decade, academic evaluation systems worldwide have markedly increased the use of mechanisms that privilege the use of English in journal publishing. In the context of these trends, this article highlights our findings from more than 12 years of research on the experiences and perspectives of 50 multilingual European scholars with…

  16. Academic freedom, public reactions, and anonymity.

    PubMed

    Häyry, Matti

    2014-05-01

    Academic freedom can be defined as immunity against adverse reactions from the general public, designed to keep scholars unintimidated and productive even after they have published controversial ideas. Francesca Minerva claims that this notion of strict instrumental academic freedom is supported by Ronald Dworkin, and that anonymity would effectively defend the sphere of immunity implied by it. Against this, I argue that the idea defended by Minerva finds no support in the work by Dworkin referred to; that anonymity would not in most cases effectively protect the kind of immunity sought after; and that in some cases it would not even be desirable to protect scholars from public reactions to their controversial claims. PMID:24724541

  17. Surface texture measurement for additive manufacturing

    NASA Astrophysics Data System (ADS)

    Triantaphyllou, Andrew; Giusca, Claudiu L.; Macaulay, Gavin D.; Roerig, Felix; Hoebel, Matthias; Leach, Richard K.; Tomita, Ben; Milne, Katherine A.

    2015-06-01

    The surface texture of additively manufactured metallic surfaces made by powder bed methods is affected by a number of factors, including the powder’s particle size distribution, the effect of the heat source, the thickness of the printed layers, the angle of the surface relative to the horizontal build bed and the effect of any post processing/finishing. The aim of the research reported here is to understand the way these surfaces should be measured in order to characterise them. In published research to date, the surface texture is generally reported as an Ra value, measured across the lay. The appropriateness of this method for such surfaces is investigated here. A preliminary investigation was carried out on two additive manufacturing processes—selective laser melting (SLM) and electron beam melting (EBM)—focusing on the effect of build angle and post processing. The surfaces were measured using both tactile and optical methods and a range of profile and areal parameters were reported. Test coupons were manufactured at four angles relative to the horizontal plane of the powder bed using both SLM and EBM. The effect of lay—caused by the layered nature of the manufacturing process—was investigated, as was the required sample area for optical measurements. The surfaces were also measured before and after grit blasting.

  18. Manufacturing Technology. Curriculum Guide.

    ERIC Educational Resources Information Center

    North Dakota State Board for Vocational Education, Bismarck.

    This guide provides the basic foundation to develop a one-semester course based on the cluster concept, manufacturing technology. One of a set of six guides for an industrial arts curriculum at the junior high school level, it suggests activities that allow students (1) to become familiar with and use some of the tools, materials, and processes…

  19. Illinois Manufacturing Technology Curriculum.

    ERIC Educational Resources Information Center

    Cliffe, Roger; And Others

    This manufacturing technology curriculum involves students in learning problem-solving, communication, team building, quality control, safety, math, science, and technical skills. The document begins with a section on implementation, which gives background information on the purposes and development of the curriculum, explains its rationale,…

  20. Manufacturing and Merchandising Careers

    ERIC Educational Resources Information Center

    Ryan, Peter J.; And Others

    1977-01-01

    Anyone with a flair for business, product development, or promotion might consider a manufacturing or merchandising occupation. The music industry offers many career opportunities for administrators, salespersons, marketing specialists--the record industry offers positions from promotion manager to rack jobber. Describes instrument company…

  1. Drug development and manufacturing

    SciTech Connect

    Warner, Benjamin P.; McCleskey, T. Mark; Burrell, Anthony K.

    2015-10-13

    X-ray fluorescence (XRF) spectrometry has been used for detecting binding events and measuring binding selectivities between chemicals and receptors. XRF may also be used for estimating the therapeutic index of a chemical, for estimating the binding selectivity of a chemical versus chemical analogs, for measuring post-translational modifications of proteins, and for drug manufacturing.

  2. Turbine airfoil manufacturing technology

    SciTech Connect

    Kortovich, C.

    1995-12-31

    The specific goal of this program is to define manufacturing methods that will allow single crystal technology to be applied to complex-cored airfoils components for power generation applications. Tasks addressed include: alloy melt practice to reduce the sulfur content; improvement of casting process; core materials design; and grain orientation control.

  3. Virtual manufacturing in reality

    NASA Astrophysics Data System (ADS)

    Papstel, Jyri; Saks, Alo

    2000-10-01

    SMEs play an important role in manufacturing industry. But from time to time there is a shortage in resources to complete the particular order in time. Number of systems is introduced to produce digital information in order to support product and process development activities. Main problem is lack of opportunity for direct data transition within design system modules when needed temporary extension of design capacity (virtuality) or to implement integrated concurrent product development principles. The planning experience in the field is weakly used as well. The concept of virtual manufacturing is a supporting idea to solve this problem. At the same time a number of practical problems should be solved like information conformity, data transfer, unified technological concepts acceptation etc. In the present paper the proposed ways to solve the practical problems of virtual manufacturing are described. General objective is to introduce the knowledge-based CAPP system as missing module for Virtual Manufacturing in the selected product domain. Surface-centered planning concept based on STEP- based modeling principles, and knowledge-based process planning methodology will be used to gain the objectives. As a result the planning module supplied by design data with direct access, and supporting advising environment is expected. Mould producing SME would be as test basis.

  4. Advanced Computing for Manufacturing.

    ERIC Educational Resources Information Center

    Erisman, Albert M.; Neves, Kenneth W.

    1987-01-01

    Discusses ways that supercomputers are being used in the manufacturing industry, including the design and production of airplanes and automobiles. Describes problems that need to be solved in the next few years for supercomputers to assume a major role in industry. (TW)

  5. Reusing Old Manufacturing Buildings

    ERIC Educational Resources Information Center

    Roman, Harry T.

    2014-01-01

    This article presents an interesting design challenge for students, one that will certainly let them integrate subject matter and get a sense of pride for doing something useful in their own community. The author would be willing to bet that the average town or city has some old red brick manufacturing building(s) that have seen much better days.…

  6. Manufacturing (Industrial) Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document contains 35 units to consider for use in a tech prep competency profile for the occupation of manufacturing (industrial) technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific…

  7. MEGARA optical manufacturing process

    NASA Astrophysics Data System (ADS)

    Carrasco, E.; Páez, G.; Granados, F.; Percino, E.; Castillo-Domínguez, E.; Avilés, J. L.; García-Vargas, M. L.; Gil de Paz, A.; Gallego, J.; Iglesias-Páramo, J.; Cedazo, R.

    2014-07-01

    MEGARA is the future visible integral-field and multi-object spectrograph for the GTC 10.4-m telescope located in La Palma. INAOE is a member of the MEGARA Consortium and it is in charge of the Optics Manufacturing work package. MEGARA passed the Optics Detailed Design Review in May 2013, and the blanks of the main optics have been already ordered and their manufacturing is in progress. Except for the optical fibers and microlenses, the complete MEGARA optical system will be manufactured in Mexico, shared between the workshops of INAOE and CIO. This includes a field lens, a 5-lenses collimator, a 7-lenses camera and a complete set of volume phase holographic gratings with 36 flat windows and 24 prisms, being all these elements very large and complex. Additionally, the optical tests and the complete assembly of the camera and collimator subsystems will be carried out in Mexico. Here we describe the current status of the optics manufacturing process.

  8. Whistleblowing in academic medicine

    PubMed Central

    Rhodes, R; Strain, J

    2004-01-01

    The authors present and discuss cases of academic medicine failing to address unethical behaviour in academic science and, thereby, illustrate the scope and seriousness of the problem. The Olivieri/Apotex affair is just another instance of academic medicine's dereliction in a case of scientific fraud and misconduct. Instead of vigorously supporting their faculty member in her efforts to honestly communicate her findings and to protect patients from the risks associated with the use of the study drug, the University of Toronto collaborated with the Apotex company's "stalling tactics," closed down Dr Olivieri's laboratory, harassed her, and ultimately dismissed her. The authors argue that the incentives for addressing problematic behaviour have to be revised in order to effect a change in the current pattern of response that occurs in academic medicine. An externally imposed realignment of incentives could convert the perception of the whistleblower, from their present caste as the enemy within, into a new position, as valued friend of the institution. The authors explain how such a correction could encourage appropriate reactions to scientific misconduct from academic medicine. PMID:14872069

  9. E-Books and New Library Service Models: An Analysis of the Impact of E-Book Technology on Academic Libraries.

    ERIC Educational Resources Information Center

    Jantz, Ronald

    2001-01-01

    Analyzes the implications of electronic book technology (e-books) on academic libraries. Discusses new business models for publishers, including self-publishing, Internet publishing, and partnerships with libraries as publishers; impact on library services, including cataloging, circulation, and digital preservation; user benefits; standards;…

  10. A Web-Based EFL Writing Environment as a Bridge between Academic Advisers and Junior Researchers: A Pilot Study

    ERIC Educational Resources Information Center

    Reynolds, Barry Lee

    2013-01-01

    In the age of "publish or perish," publishing academic journal articles is a must, not only for professors but also for graduate students in Taiwan. Increasingly, Taiwanese research universities are requiring masters and PhD students to write theses and dissertations in English, with an added caveat for PhD students to publish two or more articles…

  11. Academic Culture and Campus Culture of Universities

    ERIC Educational Resources Information Center

    Shen, Xi; Tian, Xianghong

    2012-01-01

    Academic culture of universities mainly consists of academic outlooks, academic spirits, academic ethics and academic environments. Campus culture in a university is characterized by individuality, academic feature, opening, leading, variety and creativity. The academic culture enhances the construction of campus culture. The campus culture…

  12. Scientific Utopia: II. Restructuring Incentives and Practices to Promote Truth Over Publishability.

    PubMed

    Nosek, Brian A; Spies, Jeffrey R; Motyl, Matt

    2012-11-01

    An academic scientist's professional success depends on publishing. Publishing norms emphasize novel, positive results. As such, disciplinary incentives encourage design, analysis, and reporting decisions that elicit positive results and ignore negative results. Prior reports demonstrate how these incentives inflate the rate of false effects in published science. When incentives favor novelty over replication, false results persist in the literature unchallenged, reducing efficiency in knowledge accumulation. Previous suggestions to address this problem are unlikely to be effective. For example, a journal of negative results publishes otherwise unpublishable reports. This enshrines the low status of the journal and its content. The persistence of false findings can be meliorated with strategies that make the fundamental but abstract accuracy motive-getting it right-competitive with the more tangible and concrete incentive-getting it published. This article develops strategies for improving scientific practices and knowledge accumulation that account for ordinary human motivations and biases. PMID:26168121

  13. Scientific Utopia: II. Restructuring Incentives and Practices to Promote Truth Over Publishability.

    PubMed

    Nosek, Brian A; Spies, Jeffrey R; Motyl, Matt

    2012-11-01

    An academic scientist's professional success depends on publishing. Publishing norms emphasize novel, positive results. As such, disciplinary incentives encourage design, analysis, and reporting decisions that elicit positive results and ignore negative results. Prior reports demonstrate how these incentives inflate the rate of false effects in published science. When incentives favor novelty over replication, false results persist in the literature unchallenged, reducing efficiency in knowledge accumulation. Previous suggestions to address this problem are unlikely to be effective. For example, a journal of negative results publishes otherwise unpublishable reports. This enshrines the low status of the journal and its content. The persistence of false findings can be meliorated with strategies that make the fundamental but abstract accuracy motive-getting it right-competitive with the more tangible and concrete incentive-getting it published. This article develops strategies for improving scientific practices and knowledge accumulation that account for ordinary human motivations and biases.

  14. 78 FR 52802 - Manufacturer of Controlled Substances; Notice of Registration: Navinta, LLC

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-26

    ... Notice dated April 10, 2013, and published in the Federal Register on April 19, 2013, 78 FR 23596... approval, then to produce commercial size batches for distribution to dosage form manufacturers upon...

  15. 77 FR 38086 - Manufacturer of Controlled Substances; Notice of Application; Chattem Chemicals Inc.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-26

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; Chattem Chemicals Inc... 16, 2012, Chattem Chemicals Inc., 3801 St. Elmo Avenue, Chattanooga, Tennessee 37409,...

  16. 78 FR 32458 - Manufacturer of Controlled Substances; Notice of Application; Siegfried USA, LLC

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; Siegfried USA, LLC... April 18, 2013, Siegfried USA, LLC., 33 Industrial Park Road, Pennsville, New Jersey 08070,...

  17. 77 FR 70825 - Manufacturer of Controlled Substances; Notice of Application; Siegfried (USA), LLC

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-27

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; Siegfried (USA), LLC... November 5, 2012, Siegfried (USA) LLC, 33 Industrial Park Road, Pennsville, New Jersey 08070,...

  18. 78 FR 5500 - Manufacturer of Controlled Substances, Notice of Application; Siegfried (USA)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-25

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances, Notice of Application; Siegfried (USA... 19, 2012, Siegfried (USA), 33 Industrial Park Road, Pennsville, New Jersey 08070, made application...

  19. 78 FR 46613 - Manufacturer of Controlled Substances; Notice of Application; Siegfried (USA), LLC

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-01

    ... From the Federal Register Online via the Government Publishing Office ] DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; Siegfried (USA), LLC... 10, 2013, Siegfried (USA), LLC., 33 Industrial Park Road, Pennsville, New Jersey 08070,...

  20. 78 FR 64019 - Manufacturer of Controlled Substances, Notice of Registration, Penick Corporation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    ... By Notice dated May 24, 2013, and published in the Federal Register on June 4, 2013, 78 FR 33441... Enforcement Administration (DEA) to be registered as a bulk manufacturer of Opium Tincture (9630), a...

  1. 78 FR 64021 - Manufacturer of Controlled Substances; Notice of Registration; Noramco, Inc. (GA)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    ...) By Notice dated June 7, 2013, and published in the Federal Register on June 20, 2013, 78 FR 37241... Administration (DEA) to be registered as a bulk manufacturer of Opium Tincture (9630), a basic class...

  2. 77 FR 26509 - Request for Information on Proposed New Program: National Network for Manufacturing Innovation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-04

    ... sensors into manufacturing processes, enabling operators to make real-time use of ``big data'' flows from... empirical data that are not widely published should include copies of the referenced materials. All...

  3. 78 FR 69134 - Manufacturer of Controlled Substances; Notice of Registration; Apertus Pharmaceuticals

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-18

    ... Pharmaceuticals By Notice dated July 23, 2013, and published in the Federal Register on July 31, 2013, 78 FR 46372... (9740) II Fentanyl (9801) II The company plans to manufacture small quantities of the listed...

  4. 77 FR 38086 - Manufacturer of Controlled Substances, Notice of Application, Cambridge Isotope Lab

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-26

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances, Notice of Application, Cambridge Isotope Lab... 7, 2012, Cambridge Isotope Lab, 50 Frontage Road, Andover, Massachusetts 01810, made application...

  5. 78 FR 52802 - Manufacturer of Controlled Substances; Notice of Application; Cambridge Isotope Lab

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-26

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; Cambridge Isotope Lab... 01, 2013, Cambridge Isotope Lab, 50 Frontage Road, Andover, Massachusetts 01810, made application...

  6. 78 FR 49547 - Manufacturer of Controlled Substances, Notice of Registration, Rhodes Technologies

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-14

    ... By Notice dated April 10, 2013, and published in the Federal Register on April 19, 2013, 78 FR 23596... (9668) II Fentanyl (9801) II The company plans to manufacture the listed controlled substances in...

  7. 77 FR 67677 - Manufacturer of Controlled Substances; Notice of Registration; Nektar Therapeutics

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-13

    ... By Notice dated July 17, 2012, and published in the Federal Register on July 26, 2012, 77 FR 43862... Drug Enforcement Administration (DEA) to be registered as a bulk manufacturer of Fentanyl (9801),...

  8. 77 FR 55504 - Manufacturer of Controlled Substances; Notice of Registration; Research Triangle Institute

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-10

    ... Institute By Notice dated May 15, 2012, and published in the Federal Register on May 22, 2012, 77 FR 30327... Marihuana (7360) I Cocaine (9041) II The Institute will manufacture marihuana, and cocaine derivatives...

  9. IMPROVED EQUIPMENT CLEANING IN COATED AND LAMINATED SUBSTRATE MANUFACTURING FACILITIES (PHASE II)

    EPA Science Inventory

    The report discusses EPA efforts to identify, demonstrate, and publish pollution prevention information and opportunities for equipment cleaning for the coated and laminated substrate manufacturing industry. It summarizes initial data collected and summarized during industry obse...

  10. 77 FR 67398 - Manufacturer of Controlled Substances; Notice of Application, Cody Laboratories, Inc.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-09

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application, Cody Laboratories... that on May 30, 2012, Cody Laboratories, Inc., ATTN: Richard Asherman, 601 Yellowstone Avenue,...

  11. 77 FR 16263 - Manufacturer of Controlled Substances, Notice of Application; Cody Laboratories, Inc.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-20

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances, Notice of Application; Cody Laboratories... that on January 27, 2012, Cody Laboratories, Inc., 601 Yellowstone Avenue, Cody, Wyoming 82414,...

  12. 77 FR 60144 - Manufacturer of Controlled Substances; Notice of Application; Chemic Laboratories, Inc.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-02

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; Chemic Laboratories... July 26, 2012, Chemic Laboratories, Inc., 480 Neponset Street, Building 7, Canton, Massachusetts...

  13. 78 FR 64018 - Manufacturer of Controlled Substances; Notice of Application; GE Healthcare

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    ... From the Federal Register Online via the Government Publishing Office ] DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; GE Healthcare... September 12, 2013, GE Healthcare, 3350 North Ridge Avenue, Arlington Heights, Illinois 60004- 1412,...

  14. 78 FR 12103 - Manufacturer of Controlled Substances; Notice of Application; GE Healthcare

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-21

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; GE Healthcare... August 31, 2012, GE Healthcare, 3350 North Ridge Avenue, Arlington Heights, Illinois 60004- 1412,...

  15. 77 FR 75671 - Manufacturer of Controlled Substances; Notice of Registration; Rhodes Technologies

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-21

    ... By Notice dated May 31, 2012, and published in the Federal Register on June 8, 2012, 77 FR 34072... Enforcement Administration (DEA) to be registered as a bulk manufacturer of morphine (9300), a basic class...

  16. 77 FR 64143 - Manufacturer of Controlled Substances; Notice of Registration; Cambridge Isotope Lab

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-18

    ... Lab By Notice dated June 18, 2012, and published in the Federal Register on June 26, 2012, 77 FR 38086... Drug Enforcement Administration (DEA) to be registered as a bulk manufacturer of Morphine (9300),...

  17. 77 FR 64144 - Manufacturer of Controlled Substances; Notice of Registration; Lin Zhi International, Inc.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-18

    ... International, Inc. By Notice dated May 15, 2012, and published in the Federal Register on May 22, 2012, 77 FR... Dextropropoxyphene, bulk (non-dosage forms) II (9273). Morphine (9300) II The company plans to manufacture the...

  18. 77 FR 39265 - Request for Manufacturer Involvement in National Institute of Justice (NIJ) Standard Development...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-02

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Office of Justice Programs Request for Manufacturer Involvement in National Institute of Justice (NIJ) Standard Development Efforts AGENCY: National Institute of Justice, Office of Justice Programs, DOJ....

  19. 77 FR 24988 - Manufacturer of Controlled Substances; Notice of Registration; ISP Freetown Fine Chemicals

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-26

    ... Chemicals By Notice dated October 8, 2010, and published in the Federal Register on October 20, 2010, 75 FR... Amphetamine (1100) II Phenylacetone (8501) II The company plans to manufacture bulk API, for distribution...

  20. 75 FR 7029 - Lonza, Inc., Riverside Plant, Lonza Exclusive Synthesis Section, Custom Manufacturing Division...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-16

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Lonza, Inc., Riverside Plant, Lonza Exclusive Synthesis Section, Custom Manufacturing Division Including On-Site Leased Workers of Lab Support, Aerotek, Job Exchange,...

  1. Women in academic medicine.

    PubMed

    Bickel, J

    2000-01-01

    Women now constitute 43% of US medical students, 37% of residents, and 27% of full-time medical school faculty. Less than 11% of women faculty are full professors, however, compared to 31% of men, and these proportions haven't changed in more than 15 years. Since the proportion of women reaching the top ranks remains relatively low, the pool of women available for leadership positions in academic medicine is still small. This review article first summarizes recent data on women's representation in academic medicine and then discusses why they are not succeeding at the same pace as men. Reasons include a complex combination of women's choices, sexism, cultural stereotypes, constraints in combining family responsibilities with professional opportunities, and lack of effective mentoring. Multiple approaches are required to overcome these "cumulative disadvantages," among them improving the gender climate at academic medical centers; the mentoring of women faculty, residents, and students; and skill-building opportunities for women.

  2. Measurement of academic entitlement.

    PubMed

    Miller, Brian K

    2013-10-01

    Members of Generation Y, or Millennials, have been accused of being lazy, whiny, pampered, and entitled, particularly in the college classroom. Using an equity theory framework, eight items from a measure of work entitlement were adapted to measure academic entitlement in a university setting in three independent samples. In Study 1 (n = 229), confirmatory factor analyses indicated good model fit to a unidimensional structure for the data. In Study 2 (n = 200), the questionnaire predicted unique variance in university satisfaction beyond two more general measures of dispositional entitlement. In Study 3 (n = 161), the measure predicted unique variance in perceptions of grade fairness beyond that which was predicted by another measure of academic entitlement. This analysis provides evidence of discriminant, convergent, incremental, concurrent criterion-related, and construct validity for the Academic Equity Preference Questionnaire.

  3. Measurement of academic entitlement.

    PubMed

    Miller, Brian K

    2013-10-01

    Members of Generation Y, or Millennials, have been accused of being lazy, whiny, pampered, and entitled, particularly in the college classroom. Using an equity theory framework, eight items from a measure of work entitlement were adapted to measure academic entitlement in a university setting in three independent samples. In Study 1 (n = 229), confirmatory factor analyses indicated good model fit to a unidimensional structure for the data. In Study 2 (n = 200), the questionnaire predicted unique variance in university satisfaction beyond two more general measures of dispositional entitlement. In Study 3 (n = 161), the measure predicted unique variance in perceptions of grade fairness beyond that which was predicted by another measure of academic entitlement. This analysis provides evidence of discriminant, convergent, incremental, concurrent criterion-related, and construct validity for the Academic Equity Preference Questionnaire. PMID:24597456

  4. 76 FR 17968 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-31

    ... August 13, 2010, and published in the Federal Register on September 1, 2010, 75 FR 53719, Cambrex Charles... Enforcement Administration (DEA) to be registered as a bulk manufacturer of Gamma Hydroxybutyric Acid (GHB... Gamma Hydroxybutyric Acid (GHB) ] (2010) in bulk active pharmaceutical ingredient (API) form...

  5. 76 FR 72973 - Manufacturer of Controlled Substances; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-28

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on July 18, 2011, Aldrich Chemical Company Inc., DBA...

  6. 75 FR 53719 - Manufacturer of Controlled Substances; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-01

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application Pursuant to Sec. 1301.33(a) of Title 21 of the Code of Federal Regulations (CFR), this is notice that on May 17, 2010, Cambridge Isotope Lab, 50 Frontage...

  7. 76 FR 8777 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-15

    ... diagnostic imaging in the diagnosis of Parkinson's Disease and for manufacture in bulk for investigational... October 8, 2010 and published in the Federal Register on October 20, 2010, 75 FR 64744, GE Healthcare... considered the factors in 21 U.S.C. 823(a) and determined that the registration of GE Healthcare...

  8. 76 FR 72976 - Manufacturer of Controlled Substances Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-28

    ... 14, 2011, and published in the Federal Register on June 22, 2011, 76 FR 36577, Chattem Chemicals Inc... substances: Drug Schedule Gamma Hydroxybutyric Acid (2010) I Opium tincture (9630) II Opium, powdered (9639) II Opium, granulated (9640) II Tapentadol (9780) II The company plans to manufacture the...

  9. 76 FR 77258 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-12

    ... August 8, 2011, and published in the Federal Register on August 18, 2011, 76 FR 51402, Lin Zhi..., bulk (non-dosage forms) II (9273). Morphine (9300) II The company plans to manufacture the listed... with state and local laws, and a review of the company's background and history. Therefore, pursuant...

  10. 76 FR 25376 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-04

    ... January 26, 2011, and published in the Federal Register on February 3, 2011, 76 FR 6159, Johnson Matthey... Morphine (9300) II Thebaine (9333) II The company plans to manufacture the listed controlled substances in... of the company's background and history. Therefore, pursuant to 21 U.S.C. 823(a), and in...

  11. 76 FR 5829 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-02

    ... August 3, 2010, and published in the Federal Register on September 1, 2010, 75 FR 53719, Cambridge Isotope Lab, 50 Frontage Road, Andover, Massachusetts 01810, made application by renewal to the Drug... Isotope Lab to manufacture the listed basic class of controlled substance is consistent with the...

  12. 76 FR 62450 - Manufacturer of Controlled Substances; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-07

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on July 28, 2011, GE Healthcare, 3350 North Ridge...

  13. 75 FR 62570 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-12

    ... 17, 2010, and published in the Federal Register on June 28, 2010 (75 FR 36683), Siegfried (USA), 33 Industrial Park Road, Pennsville, New Jersey 08070, made application by letter to the Drug Enforcement... of controlled substance listed in schedule I. The company plans to manufacture the listed...

  14. 75 FR 44285 - Manufacturer of Controlled Substances: Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-28

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances: Notice of Application Pursuant to Sec. 1301.33(a) of Title 21 of the Code of Federal Regulations (CFR), this is notice that on January 27, 2009, Johnson Matthey Pharmaceutical...

  15. 77 FR 5847 - Manufacturer of Controlled Substances; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-06

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on November 15, 2011, Sigma Aldrich Research Biochemicals,...

  16. 76 FR 5829 - Manufacturer of Controlled Substances; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-02

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on November 24, 2010, Sigma Aldrich Research Biochemicals,...

  17. 75 FR 14190 - Manufacturer of Controlled Substances; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-24

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application Pursuant to Sec. 1301.33(a) of Title 21 of the Code of Federal Regulations (CFR), this is notice that on December 4, 2009, Sigma Aldrich Research Biochemicals,...

  18. 76 FR 51402 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-18

    ... 11, 2011, and published in the Federal Register on April 19, 2011, 76 FR 21916, Norac Inc., 405 S... Methamphetamine (1105) II Pentobarbital (2270) II Nabilone (7379) II With regard to Gamma Hydroxybutyric Acid (2010), Tetrahydrocannabinols (7370), and Methamphetamine (1105) only, the company manufactures...

  19. 75 FR 76756 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-09

    ... 16, 2010, and published in the Federal Register on March 24, 2010, (75 FR 14189), Norac Inc., 405 S... substances: Drug Schedule Gamma Hydroxybutyric Acid (2010) I Tetrahydrocannabinols (7370) I Methamphetamine... (7370), and Methamphetamine (1105) only, the company manufactures these controlled substances in...

  20. 76 FR 72976 - Manufacturer of Controlled Substances Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-28

    ... 22, 2011, and published in the Federal Register on June 29, 2011, 76 FR 38209, Pharmagra Labs Inc... research and clinical trials. No comments or objections have been received. DEA has considered the factors in 21 U.S.C. 823(a) and determined that the registration of Pharmagra Labs, Inc. to manufacture...

  1. 77 FR 5849 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-06

    ... 23, 2011, and published in the Federal Register on July 5, 2011, 76 FR 39127, Johnson Matthey... Remifentanil (9739), the basic class of controlled substance in schedule II. The company plans to utilize this... analytical testing in support of the company's primary manufacturing facility in West Deptford, New...

  2. 76 FR 77257 - Manufacturer of Controlled Substances Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-12

    ... ensure that the company's registration is consistent with the public interest. The investigation has... 10, 2011, and published in the Federal Register on August 18, 2011, 76 FR 51401, Chemica, 316 West... manufacture of Benzphetamine, a schedule III non-narcotic controlled substance. The company plans to utilize...

  3. 75 FR 65660 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-26

    ... Archimica, Inc. to ensure that the company's registration is consistent with the public interest. The... October 21, 2009 and published in the Federal Register on October 28, 2009, (74 FR 55586), Archimica, Inc... controlled substance listed in schedule II. The company plans to manufacture the listed controlled...

  4. 76 FR 21407 - Manufacturer of Controlled Substances Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-15

    ... ensure that the company's registration is consistent with the public interest. The investigation has... November 19, 2010, and published in the Federal Register on December 3, 2010, 75 FR 75497, Siegfried (USA... class of controlled substance in schedule I. The company plans to manufacture small quantities of...

  5. 76 FR 10070 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-23

    ... public interest at this time. DEA has investigated Halo Pharmaceutical Inc. to ensure that the company's... October 8, 2010, and published in the Federal Register on October 20, 2010, 75 FR 64745, Halo... intermediate in the manufacture of Hydromorphone and is not for commercial distribution. The company plans...

  6. 76 FR 17968 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-31

    ... August 2, 2010, and published in the Federal Register on September 1, 2010, (75 FR 53720), Austin Pharma... controlled substances: Drug Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I Alphamethadol (9605) I... code 7360 (Marihuana), the company plans to bulk manufacture cannabidiol as a synthetic...

  7. 77 FR 2324 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-17

    ... August 10, 2011, and published in the Federal Register on August 18, 2011, 76 FR 51401, AMRI Rensselaer... controlled substances: Drug Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I Amphetamine (1100) II... 7360 (Marihuana), the company plans to bulk manufacture cannabidiol as a synthetic intermediate....

  8. 75 FR 9614 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-03

    ... October 16, 2009, and published in the Federal Register on October 28, 2009, (74 FR 55587), Cayman... controlled substances listed in schedule I: Drug Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I The company plans to manufacture small quantities of marihuana derivatives for research purposes....

  9. 75 FR 6062 - Manufacturer of Controlled Substances Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-05

    ... 21, 2009, and published in the Federal Register on September 8, 2009, (74 FR 46232), Research... schedules I and II: Drug Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I Cocaine (9041) I The Institute will manufacture small quantities of cocaine and marihuana derivatives for use by their...

  10. 77 FR 2324 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-17

    ... August 9, 2011, and published in the Federal Register on August 18, 2011, 76 FR 51401, Austin Pharma LLC... controlled substances: Drug Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I The company plans to... drug code 7360 (Marihuana), the company plans to bulk manufacture cannabidiol as a...

  11. 76 FR 21917 - Manufacturer of Controlled Substances; Notice of Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-19

    ... October 8, 2010, and published in the Federal Register on October 20, 2010, (75 FR 64744), Cayman Chemical... controlled substances: Drug Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I The company plans to manufacture small quantities of marihuana derivatives for research purposes. In reference to drug code...

  12. Sport: The Liveliest Art. Diamonds Are a Publisher's Best Friend: The Baseball Mystique and Scholarly Publishing; "Take Me Out to the Ball Game...." The Importance of Archiving Sporting Activities; Telling the Story: Museums and Libraries Partner To Make Sport History Live; "I'm Not Surfing. This is My Job"; Sideline: Webliography of General Sports Sites: The Big Four; Public Libraries Step Up to the Plate: Knowing and Responding to the Needs of Our Rapidly Changing Communities; Sideline: Sports Fiction; Ten Best Sport Titles...in My Public Library, in My Media Center, in My High School Library, in My Academic Library.

    ERIC Educational Resources Information Center

    Wilson, Steve; Wise, Suzanne; Koonts, Russell S.; Sumner, Jim; Meier, James R.; Gonzalez, Lena; Ruszczyk, James R.; Fiedler, Stephanie; Mayo, Kim P.; Holmes, Gerald

    2001-01-01

    Eight articles in this section focus on sports: the baseball mystique and scholarly publishing; importance of archiving sporting activities; museums and libraries partner to make sport history live; online resources for sports information; Webliography of general sports sites; public libraries responding to changing needs; sports fiction; and "ten…

  13. Academic medicine in Russia.

    PubMed

    Burger, Edward J; Ziganshina, Lilia; Ziganshin, Airat U

    2004-12-01

    Academic medicine, along with professionalism of the medical community in Russia underwent a remarkable evolution from the Revolution through the decline of the Soviet Union. The Soviet period brought about an enormous expansion of numbers of admissions to medical schools and a corresponding increase in the number of new physicians. Academic medical institutions were separated from institutions of higher learning in general and medical science was separated from the mainstream of science. Many of these features have been reversed in the past 14 years and re-professionalization of medicine has resumed. PMID:15578798

  14. Electronic Publishing and Library Technical Services.

    ERIC Educational Resources Information Center

    Aveney, Brian

    1984-01-01

    Trends in electronic editions, on-demand publishing, and online publishing are reviewed and their potential effects on library services and organization are discussed, including library material selection, acquisitions, cataloging, serials, circulation, and home printers. Thirteen references are provided. (EJS)

  15. Textbook Publishing: The Political and Economic Influences.

    ERIC Educational Resources Information Center

    Apple, Michael W.

    1989-01-01

    This article focuses on the political and economic realities surrounding textbook publishing. A discussion of the publishing industry includes an examination of industry decision makers and the influence of profit. State textbook adoption policies are also explored. (IAH)

  16. Patterns of Change within the Publishing Industry.

    ERIC Educational Resources Information Center

    Sirianni, F. J.

    This is one of several papers presented at a Federal Trade Commission Symposium on Media Concentration. It reviews the controversy between book publishers and the Authors Guild concerning the control of already published materials and the future of publishing, and it analyzes the market structure in order to put the issues into perspective. Some…

  17. Librarians and Publishers: An Uneasy Dance.

    ERIC Educational Resources Information Center

    Schuman, Patricia Glass

    1994-01-01

    Discusses the relationship between the library and publishing communities and issues that impact the relationship. Topics covered include an overview of cooperative efforts and tensions created by issues such as photocopying and copyright, repackaging of government information by commercial publishers, the power of publishing conglomerates, and…

  18. The Future of Scholarly Journal Publishing.

    ERIC Educational Resources Information Center

    Oppenheim, Charles; Greenhalgh, Clare; Rowland, Fytton

    2000-01-01

    Surveys the recent literature on scholarly publishing and its conversion to the electronic medium. Presents results of a questionnaire survey of the United Kingdom-based scholarly publishing industry. Results suggest publishers are moving quickly towards use of the Internet as a major medium for distribution, though they do not expect an early…

  19. The Changing Business of Scholarly Publishing.

    ERIC Educational Resources Information Center

    Hunter, Karen

    1993-01-01

    Discussion of changes and trends in scholarly publishing highlights monographs; journals; user-centered publishing; electronic products and services, including adding value, marketing strategies, and new pricing systems; changing attitudes regarding copyright; trends in publishing industry reorganization; and impacts on research libraries. (LRW)

  20. Self-Publishing Indigenous Language Materials.

    ERIC Educational Resources Information Center

    St. Clair, Robert N.; Busch, John; Webb, B. Joanne

    Indigenous language programs that have a literacy component require reading materials. Recent advances in computer technology and certain legal changes in the publishing industry have made self-publishing such materials an easier task. This paper describes some of the steps necessary to self-publish indigenous language materials. Suggestions are…

  1. Why should we publish Linked Data?

    NASA Astrophysics Data System (ADS)

    Blower, Jon; Riechert, Maik; Koubarakis, Manolis; Pace, Nino

    2016-04-01

    publishing Linked Data will result in tangible user benefits. This presentation will address a number of these issues, using real-world experience gathered from four recent European projects: MELODIES (http://melodiesproject.eu), LEO (http://linkedeodata.eu), CHARMe (http://linkedeodata.eu) and TELEIOS (http://www.earthobservatory.eu). These projects have all applied Linked Data techniques in practical, real-world situations involving the use of diverse data (including earth science data) by both industrial and academic users. Specifically, we will: • Identify a set of practical and valuable uses for Linked Data, focusing on areas where Linked Data fills gaps left by other technologies. These uses include: enabling the discovery of earth science data using mass-market search engines, helping users to understand data and its uses, combining data from multiple sources and enabling the annotation of data by users. • Enumerate some common challenges faced by developers of data-driven services who wish to use Linked Data in their applications. • Describe a new suite of tools for managing, processing and visualising Linked Data in earth science applications (including geospatial Linked Data).

  2. Data publishing - visions of the future

    NASA Astrophysics Data System (ADS)

    Schäfer, Leonie; Klump, Jens; Bertelmann, Roland; Klar, Jochen; Enke, Harry; Rathmann, Torsten; Koudela, Daniela; Köhler, Klaus; Müller-Pfefferkorn, Ralph; van Uytvanck, Dieter; Strathmann, Stefan; Engelhardt, Claudia

    2013-04-01

    This poster describes future scenarios of information infrastructures in science and other fields of research. The scenarios presented are based on practical experience resulting from interaction with research data in a research center and its library, and further enriched by the results of a baseline study of existing data repositories and data infrastructures. The baseline study was conducted as part of the project "Requirements for a multi-disciplinary research data infrastructure (Radieschen)", which is funded by the German Research Foundation (DFG). Current changes in information infrastructures pose new challenges to libraries and scientific journals, which both act as information service providers, facilitating access to digital media, support publications of research data and enable their long-term archiving. Digital media and research data open new aspects in the field of activity of libraries and scientific journals. What will a library of the future look like? Will a library purely serve as interface to data centres? Will libraries and data centres merge into a new service unit? Will a future library be the interface to academic cloud services? Scientific journals already converted from mostly print editions to print and e-journals. What type of journals will emerge in the future? Is there a role for data-centred journals? Will there be journals to publish software code to make this type of research result citable and a part of the record of science? Just as users evolve from being consumers of information into producers, the role of information service providers, such as libraries, changes from a purely supporting to a contributing role. Furthermore, the role of the library changes from a central point of access for the search of publications to an important link in the value-adding chain from author to publication. Journals for software publication might be another vision for the future in data publishing. Software forms the missing link between big

  3. Enhancing the mission of academic surgery by promoting scientific writing skills.

    PubMed

    Derish, Pamela A; Maa, John; Ascher, Nancy L; Harris, Hobart W

    2007-06-15

    Writing and publishing are key to career development and academic success for surgeons who have less time than ever to devote to these activities. To improve the scientific writing skills of its faculty and trainees and to help them complete their manuscripts and grant proposals more quickly, the Department of Surgery at the University of California, San Francisco (UCSF) established a service dedicated to scientific writing and editing. Through coursework in scientific writing, individual writing consultations, and editorial review, the service helps academic surgeons with the difficult tasks of writing and publishing their research and seeking extramural funding. The service has rapidly become a successful adjunct to the academic mission of the UCSF Department of Surgery and could offer a model for other academic surgery departments to increase scientific productivity and advance the academic surgical mission.

  4. Computers in manufacturing

    NASA Astrophysics Data System (ADS)

    Hudson, C. A.

    1982-02-01

    CAD/CAM advances and applications for enhancing productivity in industry are explored. Wide-spread use of CAD/CAM devices are projected to occur by the time period 1992-1997, resulting in a higher percentage of technicians in the manufacturing process, while the cost of computers and software will continue to fall and become more widely available. Computer aided design is becoming a commercially viable system for design and geometric modeling, engineering analysis, kinematics, and drafting, and efforts to bridge the gap between CAD and CAM are indicated, with particular attention given to layering, wherein individual monitoring of different parts of the manufacturing process can be effected without crossover of unnecessary information. The potentials and barriers to the use of robotics are described, with the added optimism that displaced workers to date have moved up to jobs of higher skill and interest.

  5. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  6. 78 FR 69336 - Title I-Improving the Academic Achievement of the Disadvantaged

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-19

    ... FR 52467) a notice of proposed rulemaking regarding modified academic achievement standards and... period for seven days. DATES: For the proposed rule published on August 23, 2013 (78 FR 52467), written... August 23, 2013, we published a notice of proposed rulemaking in the Federal Register (78 FR...

  7. Academic Practice in Transition: Hidden Stories of Academic Identities

    ERIC Educational Resources Information Center

    Churchman, Deborah; King, Sharron

    2009-01-01

    Academic work is becoming increasingly restrictive and controlled as tertiary institutions move towards a more corporate managerialistic mode of operating. This paper uses a narrative lens to explore the ways in which academic staff make sense of this new environment. In particular, it compares academic staff's stories of their worklife with the…

  8. Academic buoyancy: Towards an understanding of students' everyday academic resilience.

    PubMed

    Martin, Andrew J; Marsh, Herbert W

    2008-02-01

    Academic buoyancy is developed as a construct reflecting everyday academic resilience within a positive psychology context and is defined as students' ability to successfully deal with academic setbacks and challenges that are typical of the ordinary course of school life (e.g., poor grades, competing deadlines, exam pressure, difficult schoolwork). Data were collected from 598 students in Years 8 and 10 at five Australian high schools. Half-way through the school year and then again at the end of the year, students were asked to rate their academic buoyancy as well as a set of hypothesized predictors (self-efficacy, control, academic engagement, anxiety, teacher-student relationship) in the area of mathematics. Multilevel modeling found that the bulk of variance in academic buoyancy was explained at the student level. Confirmatory factor analysis and structural equation modeling showed that (a) Time 1 anxiety (negatively), self-efficacy, and academic engagement significantly predict Time 1 academic buoyancy; (b) Time 2 anxiety (negatively), self-efficacy, academic engagement, and teacher-student relationships explain variance in Time 2 academic buoyancy over and above that explained by academic buoyancy at Time 1; and (c) of the significant predictors, anxiety explains the bulk of variance in academic buoyancy. PMID:19083351

  9. Is Your Academic Library Pinning? Academic Libraries and Pinterest

    ERIC Educational Resources Information Center

    Thornton, Elaine

    2012-01-01

    Academic libraries are flocking to online social networking sites in an effort to meet users where they are. Pinterest is the latest of these rapidly growing online social networking tools. The author of this article reports results from a survey on academic libraries' presence on Pinterest. The survey found most academic library pinboards are in…

  10. Academic Buoyancy: Towards an Understanding of Students' Everyday Academic Resilience

    ERIC Educational Resources Information Center

    Martin, Andrew J.; Marsh, Herbert W.

    2008-01-01

    Academic buoyancy is developed as a construct reflecting everyday academic resilience within a positive psychology context and is defined as students' ability to successfully deal with academic setbacks and challenges that are typical of the ordinary course of school life (e.g., poor grades, competing deadlines, exam pressure, difficult…

  11. Academic buoyancy: Towards an understanding of students' everyday academic resilience.

    PubMed

    Martin, Andrew J; Marsh, Herbert W

    2008-02-01

    Academic buoyancy is developed as a construct reflecting everyday academic resilience within a positive psychology context and is defined as students' ability to successfully deal with academic setbacks and challenges that are typical of the ordinary course of school life (e.g., poor grades, competing deadlines, exam pressure, difficult schoolwork). Data were collected from 598 students in Years 8 and 10 at five Australian high schools. Half-way through the school year and then again at the end of the year, students were asked to rate their academic buoyancy as well as a set of hypothesized predictors (self-efficacy, control, academic engagement, anxiety, teacher-student relationship) in the area of mathematics. Multilevel modeling found that the bulk of variance in academic buoyancy was explained at the student level. Confirmatory factor analysis and structural equation modeling showed that (a) Time 1 anxiety (negatively), self-efficacy, and academic engagement significantly predict Time 1 academic buoyancy; (b) Time 2 anxiety (negatively), self-efficacy, academic engagement, and teacher-student relationships explain variance in Time 2 academic buoyancy over and above that explained by academic buoyancy at Time 1; and (c) of the significant predictors, anxiety explains the bulk of variance in academic buoyancy.

  12. Advancements in asphere manufacturing

    NASA Astrophysics Data System (ADS)

    Fess, Edward; DeFisher, Scott

    2013-09-01

    Aspheric optics can pose as a challenge to the manufacturing community due to the surface shape and level of quality required. The aspheric surface may have inflection points that limit the usable tool size during manufacturing, or there may be a stringent tolerance on the slope for mid-spatial frequencies that may be problematic for sub-aperture finishing techniques to achieve. As aspheres become more commonplace in the optics community, requests for more complex aspheres have risen. OptiPro Systems has been developing technologies to create a robust aspheric manufacturing process. Contour deterministic microgrinding is performed on a Pro80 or eSX platform. These platforms utilize software and the latest advancements in machine motion to accurately contour the aspheric shape. Then the optics are finished using UltraForm Finishing (UFF), which is a sub-aperture polishing process. This process has the capability to adjust the diameter and compliance of the polishing lap to allow for finishing over a wide range of shapes and conditions. Finally, the aspheric surfaces are qualified using an OptiTrace contact profilometer, or an UltraSurf non-contact 3D surface scanner. The OptiTrace uses a stylus to scan across the surface of the part, and the UltraSurf utilizes several different optical pens to scan the surface and generate a topographical map of the surface under test. This presentation will focus on the challenges for asphere manufacturing, how OptiPro has implemented its technologies to combat these challenges, and provide surface data for analysis.

  13. Electrohydrodynamic Printing and Manufacturing

    NASA Technical Reports Server (NTRS)

    Aksay, Ilhan A. (Inventor); Saville, Dudley A. (Inventor); Poon, Hak Fei (Inventor); Korkut, Sibel (Inventor); Chen, Chuan-hua (Inventor)

    2014-01-01

    An stable electrohydrodynamic filament is obtained by causing a straight electrohydrodynamic filament formed from a liquid to emerge from a Taylor cone, the filament having a diameter of from 10 nm to 100.mu.m. Such filaments are useful in electrohydrodynamic printing and manufacturing techniques and their application in liquid drop/particle and fiber production, colloidal deployment and assembly, and composite materials processing.

  14. 78 FR 33442 - Manufacturer of Controlled Substances; Notice of Registration; GE Healthcare

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-04

    ... radioactive product to diagnose Parkinson's disease; and to manufacture a bulk investigational new drug (IND... Notice dated February 8, 2013 and published in the Federal Register on February 21, 2013, 78 FR 12103, GE... 21 U.S.C. 823(a), and determined that the registration of GE Healthcare to manufacture the...

  15. 75 FR 41524 - Horton Manufacturing Company, LLC, Tallmadge, OH; Amended Certification Regarding Eligibility To...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-16

    ... Employment and Training Administration Horton Manufacturing Company, LLC, Tallmadge, OH; Amended... Department's notice of determination was published in the Federal Register April 23, 2010 (75 FR 21355). At... Manufacturing Company, LLC went into receivership in 2009 and subsequently sold its assets to Wildcomm-...

  16. 75 FR 16843 - Core Manufacturing, Multi-Plastics, Inc., Division, Sipco, Inc., Division, Including Leased...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-02

    ... Notice was published in the Federal Register on January 25, 2010 (75 FR 3935). After the certification... Employment and Training Administration Core Manufacturing, Multi-Plastics, Inc., Division, Sipco, Inc..., 2009, applicable to workers of Core Manufacturing, Multi-Plastics, Inc., Division and Sipco,...

  17. 75 FR 63513 - Modine Manufacturing Company Including On-Site Leased Workers From Securitas, Aerotek and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-15

    ... Employment and Training Administration Modine Manufacturing Company Including On-Site Leased Workers From... workers and former workers of Modine Manufacturing Company, Pemberville, Ohio (subject firm). The workers... of revised determination was published in the Federal Register on August 13, 2010 (75 FR 49538)....

  18. 77 FR 31390 - Manufacturer of Controlled Substances; Notice of Registration; Pcas-Nanosyn, LLC

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-25

    ... company is a contract manufacturer. At the request of the company's customers, it manufactures derivatives... with the public interest. The investigation has included inspection and testing of the company's... Notice dated January 30, 2012, and published in the Federal Register on February 6, 2012, 77 FR...

  19. 78 FR 23959 - Manufacturer of Controlled Substances; Notice of Registration; PCAS-Nanosyn, LLC

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-23

    ... company is a contract manufacturer. At the request of the company's customers, it manufactures derivatives... with the public interest. The investigation has included inspection and testing of the company's... Notice dated January 15, 2013, and published in the Federal Register on January 30, 2013, 78 FR...

  20. 75 FR 47631 - Douglas Battery Manufacturing Co., Currently Known as Lexington Road Properties, Inc., Including...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-06

    ... notice was published in the Federal Register February 16, 2010 (75 FR 7036). At the request of the State... Employment and Training Administration Douglas Battery Manufacturing Co., Currently Known as Lexington Road... January 6, 2010, applicable to workers of Douglas Battery Manufacturing Co., including on-site...

  1. 77 FR 14022 - Guidance for Industry on Chemistry, Manufacturing, and Controls Information-Fermentation-Derived...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-08

    ... INFORMATION: I. Background In the Federal Register of March 14, 2011 (76 FR 13629), FDA published the notice... HUMAN SERVICES Food and Drug Administration Guidance for Industry on Chemistry, Manufacturing, and... entitled ``Chemistry, Manufacturing, and Controls (CMC) Information-- Fermentation-Derived...

  2. 75 FR 47604 - Guidance for Industry on Drug Substance Chemistry, Manufacturing, and Controls Information...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-06

    ... Federal Register of June 1, 2006 (71 FR 31194), FDA published the notice of withdrawal and revision of... Substance Chemistry, Manufacturing, and Controls Information; Availability AGENCY: Food and Drug... availability of a guidance for industry 169 entitled ``Drug Substance Chemistry, Manufacturing, and...

  3. Manufactured Homes Tool

    2005-03-09

    The MH Tool software is designed to evaluate existing and new manufactured homes for structural adequacy in high winds. Users define design elements of a manufactured home and then select the hazard(s) for analysis. MH Tool then calculates and reports structural analysis results for the specified design and hazard Method of Solution: Design engineers input information (geometries, materials, etc.) describing the structure of a manufactured home, from which the software automatically creates a mathematical model.more » Windows, doors, and interior walls can be added to the initial design. HUD Code loads (wind, snow loads, interior live loads, etc.) are automatically applied. A finite element analysis is automatically performed using a third party solver to find forces and stresses throughout the structure. The designer may then employ components of strength (and cost) most appropriate for the loads that must be carried at each location, and then re-run the analysis for verification. If forces and stresses are still within tolerable limits (such as the HUD requirements), construction costs would be reduced without sacrificing quality.« less

  4. Advanced manufacturing: Technology diffusion

    SciTech Connect

    Tesar, A.

    1995-12-01

    In this paper we examine how manufacturing technology diffuses rom the developers of technology across national borders to those who do not have the capability or resources to develop advanced technology on their own. None of the wide variety of technology diffusion mechanisms discussed in this paper are new, yet the opportunities to apply these mechanisms are growing. A dramatic increase in technology diffusion occurred over the last decade. The two major trends which probably drive this increase are a worldwide inclination towards ``freer`` markets and diminishing isolation. Technology is most rapidly diffusing from the US In fact, the US is supplying technology for the rest of the world. The value of the technology supplied by the US more than doubled from 1985 to 1992 (see the Introduction for details). History shows us that technology diffusion is inevitable. It is the rates at which technologies diffuse to other countries which can vary considerably. Manufacturers in these countries are increasingly able to absorb technology. Their manufacturing efficiency is expected to progress as technology becomes increasingly available and utilized.

  5. Academic Library Reference Services.

    ERIC Educational Resources Information Center

    Batt, Fred

    This examination of the philosophy and objectives of academic library reference services provides an overview of the major reference approaches to fulfilling the following primary objectives of reference services: (1) providing accurate answers to patrons' questions and/or helping patrons find sources to pursue their research needs; (2) building…

  6. Developing (Authentic?) Academic Writers

    ERIC Educational Resources Information Center

    Badley, Graham

    2008-01-01

    Purpose: This paper seeks to consider whether the notion of authenticity is useful or meaningful in the context of developing academics as writers. Design/methodology/approach: The approach taken is that of a reflective essay. Recent texts on authenticity in higher education are examined whilst a transactional theory of writing is also considered…

  7. Increasing Male Academic Achievement

    ERIC Educational Resources Information Center

    Jackson, Barbara Talbert

    2008-01-01

    The No Child Left Behind legislation has brought greater attention to the academic performance of American youth. Its emphasis on student achievement requires a closer analysis of assessment data by school districts. To address the findings, educators must seek strategies to remedy failing results. In a mid-Atlantic district of the Unites States,…

  8. Academic Burnout: One Perspective.

    ERIC Educational Resources Information Center

    Todd-Mancillas, William R.; Johnson, Pam

    The negative effects of academic burnout on teaching, service, and research are considered, along with societal, institutional, and individual causes of burnout. Prevention and intervention for burnout are addressed, and suggestions are offered to improve faculty evaluation procedures in order to promote the use of clearer and more systematic and…

  9. Academic Standards. Fall 1978.

    ERIC Educational Resources Information Center

    Delaware Technical and Community Coll., Dover. Terry Campus.

    The Terry Campus of Delaware Technical and Community College has established academic standards to endorse competencies and skills for all courses of the technological programs. These standards eliminate conflicts and allow students to understand, from the beginning of their studies, the requirements for awarding a degree, diploma, or certificate.…

  10. Scattering Academe's Lame Ducks.

    ERIC Educational Resources Information Center

    Greenberg, Milton

    1997-01-01

    Notes the current system of finding new academic leaders for colleges and universities often brings delay and damage. Suggests an alternative method of leadership succession is needed. One proposed method would attempt to promote from within the institution; require recruitment by the appointing officer; involve faculty, students, and staff; and…

  11. Reframing Academic Leadership

    ERIC Educational Resources Information Center

    Bolman, Lee G.; Gallos, Joan V.

    2011-01-01

    In "Reframing Academic Leadership," the authors offer higher education leaders a provocative and pragmatic guide for: (1) Crafting dynamic institutions where the whole is greater than the sum of the parts; (2) Creating campus environments that facilitate creativity and commitment; (3) Forging alliances and partnerships in service of the mission;…

  12. Academic Work and Performance

    ERIC Educational Resources Information Center

    Gunter, Helen M.

    2012-01-01

    Reading current accounts of higher education demonstrates the flux and damage of rapid neoliberal changes to the type and conduct of academic work. Opening the Times Higher Education magazine on the 28 April 2011 shows articles about cuts in staffing and undergraduate provision in England, concerns about the quality of for-profit higher education…

  13. Academic Games and Learning.

    ERIC Educational Resources Information Center

    Coleman, James S.

    The aim of this paper is to give some insight into what academic simulation games are, what their goals are, how they accomplish these goals, and how they differ from other ways of teaching and learning. A game is a way of partitioning off a portion of action from the complex stream of life activities. It partitions off a set of players and…

  14. Activist Academics: What Future?

    ERIC Educational Resources Information Center

    Grey, Sandra J.

    2013-01-01

    Four decades on from the Year of the Student, when university campuses were sites of protest and dissent, it is crucial to consider how the involvement of university academics in activist causes has changed. Using social movement frameworks this article examines how organisational, political and cultural contexts have hindered social and political…

  15. The Academic Underachiever.

    ERIC Educational Resources Information Center

    Sargent (Porter), Publisher, Boston, MA.

    The handbook classifies and describes over 700 programs and services for students who, due to behavioral, motivational, or organic impairments, are considered underachievers in the regular educational system. Listed by state are private schools which are primarily academic in nature; schools which are more specialized to treat and educate children…

  16. Bilingualism and Academic Achievement

    ERIC Educational Resources Information Center

    Han, Wen-Jui

    2012-01-01

    Using the Early Childhood Longitudinal Study, Kindergarten Cohort, this study examines the role that bilingualism plays in children's academic developmental trajectories during their early school years, with particular attention on the school environment (N = 16,380). Growth-curve results showed that despite starting with lower math scores in…

  17. Developmental Academic Advising.

    ERIC Educational Resources Information Center

    Raushi, Thaddeus M.

    1993-01-01

    Describes developmental academic advising as a comprehensive, collaborative, and empowering process designed to maximize students' educational potential. Reviews basic developmental theories (i.e., psychosocial, cognitive-developmental, and person-environmental), and focussed theories dealing with adult learners, women, people of color, and gays…

  18. The American Academic Profession.

    ERIC Educational Resources Information Center

    Graubard, Stephen R., Ed.

    This collection focuses on the forces that have worked together to create the U.S. system of higher education. Contributors consider the development of the university system, the present role of the university, and the future of higher education. The chapters are: (1) "How the Academic Profession Is Changing" (Arthur Levine); (2) "Small Worlds,…

  19. Chief Academic Officers.

    ERIC Educational Resources Information Center

    Mathews, Jay

    2001-01-01

    The emergence of a number 2 post (chief academic officer) focused on instructional leadership brings a new dynamic to the central office-particularly those headed by nontraditional superintendents. Used in universities, the CAO title lends cache. Women can get stuck in CAO positions; a few districts are eliminating them. (MLH)

  20. Academic Listening: Research Perspectives.

    ERIC Educational Resources Information Center

    Flowerdew, John, Ed.

    A collection of essays address a variety of issues in listening in the academic context, particularly in a foreign or second language. Articles include: "Research of Relevance to Second Language Lecture Comprehension--An Overview" (John Flowerdew); "Expectation-Driven Understanding in Information Systems Lecture Comprehension" (Steve Tauroza,…

  1. The Academic Chairperson's Handbook.

    ERIC Educational Resources Information Center

    Creswell, John W.; And Others

    This book champions the importance of chairing an academic department (or division) and focuses attention on the strategies "excellent" chairs use in building a positive work environment for faculty and releasing individual faculty potential. The framework is based on human, organizational, and career development; systems theory; and interpersonal…

  2. Unique Academic Skillsets

    ERIC Educational Resources Information Center

    Jerome, Stephen J.

    2015-01-01

    For the past eighty-two years, Monroe College has been committed to being a national leader in urban and international education. Established in the fall of 2004, the honors program has been transformative for the college, bringing together a wide range of professionals from across disciplines to provide innovative academic offerings. The program…

  3. Academic Standards in Alabama

    ERIC Educational Resources Information Center

    A+ Education Partnership, 2014

    2014-01-01

    Education policymakers and educators in Alabama are committed to improving the state's public education system to ensure that students gain the knowledge and skills they need to graduate from high school ready for real life. The state is on the path to implementing higher academic standards--the College and Career Ready Standards--which lay a…

  4. Academic Advising as Teaching.

    ERIC Educational Resources Information Center

    Hines, Edward R.

    1981-01-01

    One possible solution to the problem academic advising is to conceive of it not as the singular province of any one group, whether teaching faculty or counselors. Advising is seen as not the activity of teachers only, but as an integral part of teaching. (MLW)

  5. Changing the Academic Subject

    ERIC Educational Resources Information Center

    McWilliam, Erica

    2004-01-01

    The article examines the ways in which rationalities of risk currently work to produce the academic as a self-managing worker within the 'post-welfare' university as a risk-conscious organization. It explores how risk minimization as audit (individual, departmental, organizational), engages all individuals within the university in doing particular…

  6. Academic Bankruptcy. Policy Brief.

    ERIC Educational Resources Information Center

    Anderson, Amy Berk; Lewis, Anne C.

    In an effort to improve student achievement in low-performing districts, 22 states have developed academic bankruptcy laws, allowing them to intervene in districts that consistently fail to satisfy state education performance standards. This policy brief presents an overview of these statutes. The text offers a comparative summary of state…

  7. Academic Leaders as Thermostats

    ERIC Educational Resources Information Center

    Kekale, Jouni

    2003-01-01

    University of Jones launched a two-year development and training project on academic management and leadership in the beginning of 2002. Open seminars were arranged for heads for departments, deans and administrative managers. In addition, personnel administration started pilot projects with two departments in co-operation with the Finnish…

  8. Towards Transnational Academic Capitalism

    ERIC Educational Resources Information Center

    Kauppinen, Ilkka

    2012-01-01

    This paper contributes to current debates on the relationship between globalisation and higher education. The main argument of the paper is that we are currently witnessing transnationalisation of academic capitalism. This argument is illustrated by examining the collaboration between transnational corporations and research universities, and how…

  9. Signals: Applying Academic Analytics

    ERIC Educational Resources Information Center

    Arnold, Kimberly E.

    2010-01-01

    Academic analytics helps address the public's desire for institutional accountability with regard to student success, given the widespread concern over the cost of higher education and the difficult economic and budgetary conditions prevailing worldwide. Purdue University's Signals project applies the principles of analytics widely used in…

  10. Paul Piccone: Outside Academe

    ERIC Educational Resources Information Center

    Jacoby, Russell

    2008-01-01

    Today the academic world--open to Jews, women, and other previously excluded groups--has been completely revamped. Or has it? Despite the changes, is it possible the institution still promotes the mediocre and demotes the extraordinary? The life and work of Paul Piccone bear on this question--and others. Piccone, who died of cancer in 2004 at 64,…

  11. Arizona Academic Standards: Kindergarten

    ERIC Educational Resources Information Center

    Arizona Department of Education, 2009

    2009-01-01

    This publication contains Arizona public schools' academic standards for kindergarten. The contents of this document include the following: (1) The Arts Standard 2006--Kindergarten; (2) Comprehensive Health Education/Physical Activity Standards 1997--Readiness (Kindergarten); (3) Foreign and Native Language Standards 1997--Readiness…

  12. Academics in Literature

    ERIC Educational Resources Information Center

    Stimpson, Catharine R.

    2004-01-01

    Academic literature has magnitude when it presents a character so robust that he or she takes off from the page and lands to nest in ordinary parlance. Three contrasting examples described in this article are: (1) "Moo," by Jane Smiley; (2) "The Human Stain," by Philip Roth; and (3) "The Crazed," by Ha Jin. Significantly, all three of these…

  13. Kinesics in Academic Listening.

    ERIC Educational Resources Information Center

    English, Susan Lewis

    Although nonverbal behaviors have been shown to be learned, meaningful, systematic, and sometimes culture bound, kinesics, the science of body behavioral communication, has been a neglected factor in second language instruction and research, particularly in the area of academic listening. This paper describes steps taken to develop materials,…

  14. Academic Productivity and Technology.

    ERIC Educational Resources Information Center

    Green, Kenneth C.; Gilbert, Steven W.

    1995-01-01

    This article suggests that, although advances in information technology have been interpreted as leading directly to increased college faculty research productivity, the real benefits will be found in the areas of improved content, curriculum, and pedagogy. The existing academic infrastructure and perceived role of faculty are seen as major…

  15. Academic Libraries in Japan

    ERIC Educational Resources Information Center

    Cullen, Rowena; Nagata, Haruki

    2008-01-01

    Academic libraries in Japan are well resourced by international standards, and support Japan's internationally recognized research capability well, but there are also ways in which they reflect Japan's strong bureaucratic culture. Recent changes to the status of national university libraries have seen a new interest in customer service, and…

  16. Graduation Credit for Applied Academics.

    ERIC Educational Resources Information Center

    Rose, Dennis M.

    1988-01-01

    Describes a pilot project in applied academics that involved hiring certified mathemathics and science instructors so that students could obtain academic rather than vocational credit for material that vocational instructors had previously taught. (JOW)

  17. 77 FR 2275 - Manufacturing Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-17

    ... manufacturing and alternative energy manufacturing sectors. Additional factors that may be considered in the... Washington, DC. The next meeting is scheduled to take place on January 20, 2012 in Washington, DC. See 76...

  18. Dermatitis in rubber manufacturing industries

    SciTech Connect

    White, I.R.

    1988-01-01

    This review describes the history of rubber technology and the manufacturing techniques used in rubber manufacturing industries. The important aspects of the acquisition of allergic and irritant contact dermatitis within the industry are presented for the reader.

  19. Manufacturing a Superconductor in School.

    ERIC Educational Resources Information Center

    Barrow, John

    1989-01-01

    Described is the manufacture of a superconductor from a commercially available kit using equipment usually available in schools or easily obtainable. The construction is described in detail including equipment, materials, safety procedures, tolerances, and manufacture. (Author/CW)

  20. Energy 101: Clean Energy Manufacturing

    SciTech Connect

    2015-07-09

    Most of us have a basic understanding of manufacturing. It's how we convert raw materials, components, and parts into finished goods that meet our essential needs and make our lives easier. But what about clean energy manufacturing? Clean energy and advanced manufacturing have the potential to rejuvenate the U.S. manufacturing industry and open pathways to increased American competitiveness. Watch this video to learn more about this exciting movement and to see some of these innovations in action.