Science.gov

Sample records for acceptable electrostatic precipitator

  1. Resistivity Problems in Electrostatic Precipitation

    ERIC Educational Resources Information Center

    White, Harry J.

    1974-01-01

    The process of electrostatic precipitation has ever-increasing application in more efficient collection of fine particles from industrial air emissions. This article details a large number of new developments in the field. The emphasis is on high resistivity particles which are a common cause of poor precipitator performance. (LS)

  2. Electrostatic Precipitator (ESP) TRAINING MANUAL

    EPA Science Inventory

    The manual assists engineers in using a computer program, the ESPVI 4.0W, that models all elements of an electrostatic precipitator (ESP). The program is a product of the Electric Power Research Institute and runs in the Windows environment. Once an ESP is accurately modeled, the...

  3. Portable liquid collection electrostatic precipitator

    DOEpatents

    Carlson, Duane C.; DeGange, John J.; Halverson, Justin E.

    2005-10-18

    A portable liquid collection electrostatic collection precipitator for analyzing air is provided which is a relatively small, self-contained device. The device has a tubular collection electrode, a reservoir for a liquid, and a pump. The pump pumps the liquid into the collection electrode such that the liquid flows down the exterior of the collection electrode and is recirculated to the reservoir. An air intake is provided such that air to be analyzed flows through an ionization section to ionize analytes in the air, and then flows near the collection electrode where ionized analytes are collected. A portable power source is connected to the air intake and the collection electrode. Ionizable constituents in the air are ionized, attracted to the collection electrode, and precipitated in the liquid. The precipitator may also have an analyzer for the liquid and may have a transceiver allowing remote operation and data collection.

  4. Monitoring by Control Technique - Electrostatic Precipitators

    EPA Pesticide Factsheets

    Stationary source emissions monitoring is required to demonstrate that a source is meeting the requirements in Federal or state rules. This page is about electrostatic precipitator control techniques used to reduce pollutant emissions.

  5. Electrostatic Precipitation in Nearly Pure Gaseous Nitrogen

    NASA Technical Reports Server (NTRS)

    Buhler, Charles; Calle, Carlos; Clements, Sid; Cox, Bobby; Ritz, Mindy

    2008-01-01

    Electrostatic precipitation was performed in a nearly pure gaseous nitrogen system as a possible remedy for black dust contaminant from high pressure 6000 psi lines at the NASA Kennedy Space Center. The results of a prototype electrostatic precipitator that was built and tested using nitrogen gas at standard atmospheric pressures is presented. High voltage pulsed waveforms are generated using a rotating spark gap system at 30 Hz. A unique dust delivery system utilizing the Venturi effect was devised that supplies a given amount of dust per unit time for testing purposes.

  6. OPERATION AND MAINTENANCE MANUAL FOR ELECTROSTATIC PRECIPITATORS

    EPA Science Inventory

    The manual focuses on the operation and maintenance (O/M) of typical electrostatic precipitators (ESPs). It summarizes available information on theory and design in sufficient detail to provide a basic background O/M portions of the manual. Although O/M-related air pollution prob...

  7. Dust particles precipitation in AC/DC electrostatic precipitator

    NASA Astrophysics Data System (ADS)

    Jaworek, A.; Marchewicz, A.; Krupa, A.; Sobczyk, A. T.; Czech, T.; Antes, T.; Śliwiński, Ł.; Kurz, M.; Szudyga, M.; Rożnowski, W.

    2015-10-01

    Submicron and nanoparticles removal from flue or exhaust gases remain still a challenge for engineers. The most effective device used for gas cleaning in power plants or industry is electrostatic precipitator, but its collection efficiency steeply decreases for particles smaller than 1 micron. In this paper, fractional collection efficiency of two-stage electrostatic precipitator comprising of alternating electric field charger and DC supplied parallel-plate collection stage has been investigated. The total number collection efficiency for PM2.5 particles was higher than 95% and mass collection efficiency >99%. Fractional collection efficiency for particles between 300 nm and 1 μm was >95%.

  8. Use of Membrane Collectors in Electrostatic Precipitators.

    PubMed

    Bayless, David J; Pasic, Hajrudin; Alam, M Khairul; Shi, Liming; Haynes, Brian; Cochran, Joe; Khan, Wajahat

    2001-10-01

    Membrane collection surfaces, developed and patented by researchers at Ohio University, were used to replace steel plates in a dry electrostatic precipitator (ESP). Such replacement facilitates tension-based rapping, which shears the adhered particle layer from the collector surface more effectively than hammer-based rapping. Tests were performed to measure the collection efficiency of the membranes and to quantify the potential improvements of this novel cleaning technique with respect to re-entrainment. Results indicate that even semiconductor materials (e.g., carbon fibers) collect ash nearly as efficiently as steel plates, potentially indicating that collection surface resistivity is primarily dictated by the accumulated ash layer and not by the underlying plate conductivity. In addition, virtually all sheared particles separated from the collecting membranes fell within the boundary layer of the membrane, indicating extremely low potential for re-entrainment.

  9. Use of membrane collectors in electrostatic precipitators.

    PubMed

    Bayless, D J; Pasic, H; Alam, M K; Shi, L; Haynes, B; Cochran, J; Khan, W

    2001-10-01

    Membrane collection surfaces, developed and patented by researchers at Ohio University, were used to replace steel plates in a dry electrostatic precipitator (ESP). Such replacement facilitates tension-based rapping, which shears the adhered particle layer from the collector surface more effectively than hammer-based rapping. Tests were performed to measure the collection efficiency of the membranes and to quantify the potential improvements of this novel cleaning technique with respect to re-entrainment. Results indicate that even semiconductor materials (e.g., carbon fibers) collect ash nearly as efficiently as steel plates, potentially indicating that collection surface resistivity is primarily dictated by the accumulated ash layer and not by the underlying plate conductivity. In addition, virtually all sheared particles separated from the collecting membranes fell within the boundary layer of the membrane, indicating extremely low potential for re-entrainment.

  10. Membrane-based wet electrostatic precipitation

    SciTech Connect

    David J. Bayless; Liming Shi; Gregory Kremer; Ben J. Stuart; James Reynolds; John Caine

    2005-06-01

    Emissions of fine particulate matter, PM2.5, in both primary and secondary form, are difficult to capture in typical dry electrostatic precipitators (ESPs). Wet (or waterbased) ESPs are well suited for collection of acid aerosols and fine particulates because of greater corona power and virtually no re-entrainment. However, field disruptions because of spraying (misting) of water, formation of dry spots (channeling), and collector surface corrosion limit the applicability of current wet ESPs in the control of secondary PM2.5. Researchers at Ohio University have patented novel membrane collection surfaces to address these problems. Water-based cleaning in membrane collectors made of corrosion-resistant fibers is facilitated by capillary action between the fibers, maintaining an even distribution of water. This paper presents collection efficiency results of lab-scale and pilot-scale testing at First Energy's Bruce Mansfield Plant for the membrane-based wet ESP. The data indicate that a membrane wet ESP was more effective at collecting fine particulates, acid aerosols, and oxidized mercury than the metal-plate wet ESP, even with {approximately}15% less collecting area. 15 refs., 7 figs., 6 tabs.

  11. Membrane-based wet electrostatic precipitation.

    PubMed

    Bayless, David J; Shi, Liming; Kremer, Gregory; Stuart, Ben J; Reynolds, James; Caine, John

    2005-06-01

    Emissions of fine particulate matter, PM2.5, in both primary and secondary form, are difficult to capture in typical dry electrostatic precipitators (ESPs). Wet (or water-based) ESPs are well suited for collection of acid aerosols and fine particulates because of greater corona power and virtually no re-entrainment. However, field disruptions because of spraying (misting) of water, formation of dry spots (channeling), and collector surface corrosion limit the applicability of current wet ESPs in the control of secondary PM2.5. Researchers at Ohio University have patented novel membrane collection surfaces to address these problems. Water-based cleaning in membrane collectors made of corrosion-resistant fibers is facilitated by capillary action between the fibers, maintaining an even distribution of water. This paper presents collection efficiency results of lab-scale and pilot-scale testing at FirstEnergy's Bruce Mansfield Plant for the membrane-based wet ESP. The data indicate that a membrane wet ESP was more effective at collecting fine particulates, acid aerosols, and oxidized mercury than the metal-plate wet ESP, even with approximately 15% less collecting area.

  12. 4. EXTERIOR VIEW OF ELECTROSTATIC PRECIPITATORS FOR OPEN HEARTH NO. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. EXTERIOR VIEW OF ELECTROSTATIC PRECIPITATORS FOR OPEN HEARTH NO. 5 (Martin Stupich) - U.S. Steel Homestead Works, Open Hearth Steelmaking Plant, Along Monongahela River, Homestead, Allegheny County, PA

  13. 5. EXTERIOR VIEW OF ELECTROSTATIC PRECIPITATORS FOR OPEN HEARTH NO. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR VIEW OF ELECTROSTATIC PRECIPITATORS FOR OPEN HEARTH NO. 5 (Martin Stupich) - U.S. Steel Homestead Works, Open Hearth Steelmaking Plant, Along Monongahela River, Homestead, Allegheny County, PA

  14. Electrostatic precipitator for metal and particulate emission control

    SciTech Connect

    Yang, C.L.; Beltran, M.

    2000-03-01

    Improving air pollution control systems is crucial for incinerators to be an option for sewage sludge disposal. Combinations of venturi and tray tower scrubbers are the most popular air pollution control system for sewage sludge incinerators. Recently wet electrostatic precipitators have been installed downstream of the scrubbing system to ensure the compliance of new regulations. Performance and stack tests were conducted on sludge incinerators at Somerset Raritan Valley Sewage Authority and New England Treatment Company. Efficiencies in terms of heavy metal and particulate removals are presented. This paper also describes sewage sludge incinerators, existing air pollution control systems, design considerations of the wet electrostatic precipitator, as well as sampling and analysis methods.

  15. An Electrostatic Precipitator System for the Martian Environment

    NASA Technical Reports Server (NTRS)

    Calle, C. I.; Mackey, P. J.; Hogue, M. D.; Johansen, M. R.; Phillips, J. R., III; Clements, J. S.

    2012-01-01

    Human exploration missions to Mars will require the development of technologies for the utilization of the planet's own resources for the production of commodities. However, the Martian atmosphere contains large amounts of dust. The extraction of commodities from this atmosphere requires prior removal of this dust. We report on our development of an electrostatic precipitator able to collect Martian simulated dust particles in atmospheric conditions approaching those of Mars. Extensive experiments with an initial prototype in a simulated Martian atmosphere showed efficiencies of 99%. The design of a second prototype with aerosolized Martian simulated dust in a flow-through is described. Keywords: Space applications, electrostatic precipitator, particle control, particle charging

  16. Flue gas conditioning for improved particle collection in electrostatic precipitators

    SciTech Connect

    Durham, M.D.

    1993-04-16

    Several tasks have been completed in a program to evaluate additives to improve fine particle collection in electrostatic precipitators. Screening tests and laboratory evaluations of additives are summarized in this report. Over 20 additives were evaluated; four were found to improve flyash precipitation rates. The Insitec particle analyzer was also evaluated; test results show that the analyzer will provide accurate sizing and counting information for particles in the size range of [le] 10 [mu]m dia.

  17. Martian Atmospheric Dust Mitigation for ISRU Intakes via Electrostatic Precipitation

    NASA Technical Reports Server (NTRS)

    Phillips, James R., III; Pollard, Jacob R. S.; Johansen, Michael R.; Mackey, Paul J.; Clements, Sid; Calle, Carlos I.

    2016-01-01

    This document is the presentation to be given at the 2016 American Society of Civil Engineers Earth and Space Conference to examine the concept of using electrostatic precipitation for Martian atmospheric dust mitigation of the intakes of in-situ resource utilization reactors.

  18. Inward electrostatic precipitation of interplanetary particles

    NASA Technical Reports Server (NTRS)

    Rulison, Aaron J.; Flagan, Richard C.; Ahrens, Thomas J.

    1993-01-01

    An inward precipitator collects particles initially dispersed in a gas throughout either a cylindrical or spherical chamber onto a small central planchet. The instrument is effective for particle diameters greater than about 1 micron. One use is the collection of interplanetary dust particles (IDPs) which are stopped in a noble gas (xenon) by drag and ablation after perforating the wall of a thin-walled spacecraft-mounted chamber. First, the particles are positively charged for several seconds by the corona production of positive xenon ions from inward facing needles placed on the chamber wall. Then an electric field causes the particles to migrate toward the center of the instrument and onto the planchet. The collection time (on the order of hours for a 1 m radius spherical chamber) is greatly reduced by the use of optimally located screens which reapportion the electric field. Some of the electric field lines terminate on the wires of the screens so a fraction of the total number of particles in the chamber is lost. The operation of the instrument is demonstrated by experiments which show the migration of carbon soot particles with radius of approximately 1 micron in a 5 cm diameter cylindrical chamber with a single field enhancing screen toward a 3.2 mm central collection rod.

  19. Analysis of the operating parameters of a vortex electrostatic precipitator

    NASA Astrophysics Data System (ADS)

    Congxiang, Lu; Chengwu, Yi; Rongjie, Yi; Shiwen, Liu

    2017-02-01

    A vortex electrostatic precipitator (VEP) forms a vortex flow field within a precipitator by means of the vertical staggered layout of the double-vortex collecting plate facing the direction of the gas flow. The ion concentrations within the precipitator can be significantly increased. Correspondingly, the charging and coagulation rates of fine particles and particle migration velocity are significantly improved within the VEP. Since it can effectively collect fine particles and reduce precipitator size, VEPs represent a new type of electrostatic precipitator with great application potential. In this work the change curve of the external voltage, gas velocity, row spacing and effective collecting area influencing the precipitation efficiency were acquired through a single-factor experiment. Using an orthogonal regression design, attempts were made to analyze the major operating parameters influencing the collecting efficiency of fine particles, establish a multiple linear regression model and analyze the weights of factors and then acquire quantitative rules relating experimental indicators and factors. The regression model was optimized by MATLAB programming, and we then obtained the optimal factor combination which can enhance the efficiency of fine particle collection. The final optimized result is that: when gas velocity is 3.4 m s-1, the external voltage is 18 kV, row spacing is 100 mm and the effective collecting area is 1.13 m2, the rate of fine particle collection is 89.8867%. After determining and analyzing the state of the internal flow field within the VEP by particle image velocimetry (PIV), the results show that, for a particular gas velocity, a vortex zone and laminar zone are distinctly formed within the VEP, which increases the ion transport ratio as well as the charging, coagulation and collection rates of fine particles within the precipitator, thus making further improvements in the efficiency of fine particle collection.

  20. Effect of AC Electrostatic Precipitator on Removal Diesel Exhaust Particles

    NASA Astrophysics Data System (ADS)

    Kawakami, Hitomi; Zukeran, Akinori; Yasumoto, Koji; Kubojima, Masaki; Ehara, Yoshiyasu; Yamamoto, Toshiaki

    Collection of low resistive particulate matter (PM) generated from automobile and marine diesel engines or diesel generators have been known to be difficult by the conventional electrostatic precipitators (ESP). The collection efficiency for two types ESPs such as conventional DC energized ESP (DC ESP) and rectangular-AC-waveform energized ESP (AC ESP) were investigated. The low resistive PMs agglomerate like a pearl-chain on the collection plate in DC ESP, so that these are detached from the collection plate by electrostatic repulsion force and wind force. The pearl-chain particles are changed the shape, which is such a spherical, by AC ESP. Therefore, the particle re-entrainment is suppressed by AC ESP.

  1. Electrostatic precipitators create new options for particulate control

    SciTech Connect

    Toher, J.; D`Agostino, M.

    1997-07-01

    Black Hills Power and Light Co. (BHP and L) of Rapid City, S.D., decided it was vital to complete a critical evaluation of total plant costs when selecting emissions control technology for a new 80 MW generating unit in 1992. The evaluation resulted in selection of circulating dry scrubber (CDS) technology from Environmental Elements Corp. in Baltimore. The technology is available under license from Lurgi GmbH of Frankfurt, Germany. The BHP and L application is the second such selection of CDS technology in the United States but represents the first time an electrostatic precipitator (ESP) has been used for particulate control.

  2. Filtering chromatic aberration for wide acceptance angle electrostatic lenses.

    PubMed

    Fazekas, Ádám; Tóth, László

    2014-07-01

    Chromatic aberration is a major issue for imaging mainly with large acceptance angle electrostatic lenses. Its correction is necessary to take advantage of the outstanding spatial and angular resolution that these lenses provide. We propose a method to eliminate the effect of chromatic aberration on the measured images by determining the impact resulting from higher and lower kinetic energies. Based on a spectral image sequence and a matrix, which describes the transmission function of the lens, a system of linear equations is solved to approximate the 2D spectral intensity distribution of the sample surface. We present the description of our method and preliminary test results, which show significant contrast and image quality improvement. The presented algorithm can also be applied as a software-based energy analyzer.

  3. EPRICON: Agentless flue gas conditioning for electrostatic precipitators

    SciTech Connect

    Bibbo, P.P.

    1995-09-01

    Achieving efficient particulate control in coal burning electric utility plants is becoming an increasingly difficult proposition, giver, the variety of regulatory, technical, operating and environmental pressures that exist in the US. For most powerplants, particulate control is achieved by an electrostatic precipitator (ESP). Under optimal conditions, modern ESPs are capable of achieving particulate removal efficiencies of 99.7 %. Unfortunately, optimal conditions are not always present. ESP`s are sensitive to flue gas conditions, and those conditions may change dramatically after a fuel switch or the installation of some types of emissions control technology upstream of the ESP. Gas conditioning has been shown to be an effective means of returning flue gas to the ``optimal`` conditions required for efficient ESP operation following a fuel switch to a low, or at least, lower sulfur coal. Borrowing technology common in conventional soap-making plants around the turn of the century, sulfur-burning SO3 gas conditioning has been the solution to may difficult fuels in electrostatic precipitators. Although it has contributed most to improved ESP performance after a fuel switch, conventional gas conditioning has significant drawbacks. In an effort to develop an alternative to conventional SO{sub 3} gas conditioning, the Electric Power Research Institute (EPRI) initiated a research and development project that has produced an alternative and modem technology for flue gas conditioning, now called EPRICON, and licensed it to Research-Cottrell. This article describes the EPRICON process and its performance in pilot and demonstration plants.

  4. Experimental study of cross-flow wet electrostatic precipitator.

    PubMed

    Ali, M; Pasic, H; Alam, K; Tiji, S A N; Mannella, N; Silva, T; Liu, T

    2016-12-01

    This paper reports development and testing of a novel cross-flow wet electrostatic precipitator (WESP), recently patented at Ohio University, that utilizes vertical columns of permeable material in the form of polypropylene ropes placed in a cross-flow configuration within a flue gas stream. The cross-flow design has large surface area, which provides scrubbing action; therefore, it has the potential for removing multiple pollutants, including particulates, gases, vapors, and mists. In this new method, the ropes are kept wet by the liquid (water) introduced from the top of the cells running downward on the ropes by capillary action, making the permeable materials act as the ground electrode for capturing particles from the flue gas. Preliminary testing has shown an efficiency of well above 80% using two cells and three sets of discharge electrodes. Since the material of construction is primarily corrosion-resistant polymeric material, both weight and cost reductions are expected from this new design.

  5. Martian Atmospheric Dust Mitigation for ISRU Intakes via Electrostatic Precipitation

    NASA Technical Reports Server (NTRS)

    Phillips, James R., III; Pollard, Jacob R. S.; Johansen, Michael R.; Mackey, Paul J.; Clements, J. Sid; Calle, Carlos I.

    2016-01-01

    The Mars 2020 and Mars Sample Return missions expected to fly to Mars within the next ten years will each include an In Situ Resource Utilization (ISRU) system. They convert carbon dioxide in the Martian atmosphere into consumable oxygen at 1% and 20% of the rate required by a full scale human exploration Mars mission, respectively. The ISRU systems will need to draw in the surrounding atmosphere at a rate of 110L/min and 550L/min, respectively, in order to meet their oxygen production goals. Over the duration of each respective mission, a total atmospheric dust mass of 4.86g and 243g will be drawn into each system, respectively. Ingestion of large quantities of dust may interfere with ISRU operations, so a dust mitigation device will be required. The atmospheric volume and dust mass flow rates above will be utilized to simulate Martian environmental conditions in a laboratory electrostatic precipitator being developed to provide active dust mitigation support for atmospheric ISRU systems such as these.

  6. Performance characteristics of an MHD (Magnetohydrodynamic) pilot plant electrostatic precipitator

    NASA Astrophysics Data System (ADS)

    Lindner, J. S.; Jang, P. R.; Okhuysen, W. P.; Holt, J. K.

    In magnetohydrodynamic (MHD) power generation, a seed material, normally K2CO3, is added to enhance the conductivity of the coal-fired gas stream. The plasma is passed through a magnetic field and electricity is produced by the Hall effect. Future large scale MHD facilities are expected to be more efficient than conventional coal-fired power plants not only because of the dc electricity produced but also from increased heat recovery owing to the large (3000 K) combustion temperatures employed. There is; however, a finite cost for the seed material and the resulting K2SO4 particles (SO2 emissions are minimized by combination with seed potassium) must be collected, converted back to K2CO3 or KCO2H, and recycled back to the combustor. The performance characteristics of the MHD electrostatic precipitator (ESP) are therefore, of interest. We describe Mie scattering and electric field measurements on an MHD pilot scale ESP located at the Coal Fire Flow Facility (CFFF) at the University of Tennessee Space Institute. Results are reported for the determination of near-real-time collection efficiencies, the variation of the ESP performance with seed percentage, and initial studies on the extent of particle re-entrainment.

  7. Electrostatic precipitator apparatus having an improved ion generating means

    SciTech Connect

    Fitch, R.A.; Roe, J.T.

    1982-12-21

    A system is disclosed for removing particles from a gaseous medium and comprises an upstream precipitating stage followed by a downstream precipitating stage having one or more electrically charged shells with corona discharge apparatuses therein which produce ions at predictable, generally uniformly spaced locations. The shells have flat sides and openings at the upstream and downstream ends so as to permit a portion of the gaseous medium to flow through the interior of the shell and flat sides which act as collecting means. The flat sides of the shells are generally parallel to collecting side plates for providing a uniform electric field between the shells and collecting plates, the sides of the shells having openings to permit the passage of ions generated in the interior of the shell.

  8. Flue gas conditioning for improved particle collection in electrostatic precipitators

    SciTech Connect

    Durham, M.D.

    1993-01-15

    It is concluded that the laboratory tests should be conducted at high levels of SO[sub 3] such that the resulting resistivity is in the range of 10[sup 7]--10[sup 8] ohm-cm. There are several reasons leading to this conclusion. At SO[sub 3] concentrations of 30 ppM and greater, the curves for both dew point and resistivity are relatively flat so that changes in gas phase SO[sub 3] will have minimal impact on particle characteristics. In addition, the electrostatic forces are relatively flat in this range so that changes in flue gas conditions will that result in a change in resistivity by up to two orders of magnitude will have little effect on the magnitude of reentrainment. Finally, at the very low resistivity conditions, reentrainment will be the highest. Since the purpose of the laboratory resistivity tests is to determine the relative ability of the various additives to reduce resistivity, the greater the reentrainment, the easier it will be to measure an improvement. Tests were conducted by first operating at baseline conditions with no additives and then repeating the test with additives. The data collected during each test includes the resistivity of the material, thickness of the collected dust layer, and subjective indications of the dust characteristics. The candidate additives were from the polymer group, cellulose derivatives, starches and gums, and oils. No waxes or synthetic compounds have been tested to date in the laboratory apparatus. Of the seventeen additives tested, eight appeared to have a positive impact on either the ash layer thickness or the physical appearance of the dust layer. Excessive deposits on the discharge electrode resulted during injection of some of the additives. Three of the additives resulted in significant deposits in the injection chamber. The build up on the electrode was interpreted as a positive indicator of increase particle adhesion. The initial observations and comments for the eight additives are listed in Table 1.

  9. Laboratory measurements of oil mist concentrations using filters and an electrostatic precipitator.

    PubMed

    Leith, D; Leith, F A; Boundy, M G

    1996-12-01

    This study investigated the potential for mineral oil mist to evaporate, during sampling, from filters and electrostatic precipitator substrates used to assess personal exposure. If sample evaporation occurs, reported mist concentrations will underestimate true exposure. Mineral oil used as a machining fluid is not normally considered volatile; however, when dispersed as mist its aggregate surface area is so high that significant evaporation can occur. National Institute for Occupational Safety and Health Method 5026 specifies that oil mist concentrations should be determined by collecting mist on filters of mixed cellulose esters (MCE) or polyvinyl chloride (PVC). Collected mist droplets remain dispersed on the filter surface and in contact with passing air while sampling continues, conditions that can lead to sample evaporation. Less evaporation should occur for samples taken with an electrostatic precipitator, where mist droplets are separated from the airflow by electrostatic force and coalesce on the precipitator wall to form a film with relatively low surface area. Collection of mineral oil mist was investigated using a precipitator designed for personal sampling and using either an MCE or a PVC filter. The amounts of oil mist collected using the precipitator were significantly higher than the amounts collected using the filters, p < 0.001. Further tests in which clean air passed through mist-loaded precipitators and filters showed that the precipitator retained substantially more collected mist than both filters, p < 0.001, and further suggested that the MCE filter retained more mist than the PVC filter, p = 0.059. Differences in sample collection and retention between the precipitator and the filters were particularly pronounced at mist loadings below 1 mg.

  10. Auroral-particle precipitation and trapping caused by electrostatic double layers in the ionosphere.

    PubMed

    Albert, R D; Lindstrom, P J

    1970-12-25

    Interpretation of high-resolution angular distribution measurements of the primary auroral electron flux detected by a rocket probe launched into a visible aurora from Fort Churchill in the fall of 1966 leads to the following conclusions. The auroral electron flux is nearly monoenergetic and has a quasi-trapped as well as a precipitating component. The quasi-trapped flux appears to be limited to a region defined by magnetic-mirror points and multiple electrostatic double layers in the ionosphere. The electrostatic field of the double-layer distribution enhances the aurora by lowering the magnetic-mirror points and supplying energy to the primary auroral electrons.

  11. Influence of particle charging on TEOM measurements in the presence of an electrostatic precipitator

    NASA Astrophysics Data System (ADS)

    Meyer, N. K.; Lauber, A.; Nussbaumer, T.; Burtscher, H.

    2008-12-01

    The efficiency of an electrostatic precipitator (ESP) for reducing wood combustion emissions was investigated. Real-time measurements were conducted by directly reading the change in frequency of the tapered element in a Thermo Scientific 1400a TEOM. The measurements have been shown to be influenced by the charge on the aerosols reaching the tapered element such that the TEOM overestimates mass concentration. This electrostatic effect was cross-checked with particle number concentration measurements where no influence was observed. Placing a radioactive neutraliser prior to the TEOM leads to agreement between observed ESP efficiencies as measured by both the TEOM and a CPC.

  12. Influence of particle charging on TEOM measurements in the presence of an electrostatic precipitator

    NASA Astrophysics Data System (ADS)

    Meyer, N. K.; Lauber, A.; Nussbaumer, T.; Burtscher, H.

    2009-03-01

    The efficiency of an electrostatic precipitator (ESP) for reducing wood combustion emissions was investigated. Real-time measurements were conducted by directly reading the change in frequency of the tapered element in a Thermo Scientific 1400a TEOM. These measurements have been shown to be influenced by the charge on the aerosols reaching the tapered element such that the TEOM overestimates mass concentration. This electrostatic effect was crosschecked with particle mass concentration and particle number concentration measurements where no influence was observed. Placing a radioactive neutraliser prior to the TEOM leads to agreement between observed ESP efficiencies as measured by both the TEOM, mass filters and a CPC.

  13. ENVIRONMENTAL RESEARCH BRIEF: DEVELOPMENT OF GAS CLEANING TECHNOLOGY: DEMONSTRATION OF ADVANCED ELECTROSTATIC PRECIPITATOR TECHNOLOGY (INDIA ESP TRAINING)

    EPA Science Inventory

    The Brief discusses a demonstration of advanced electrostatic precipitator (ESP) diagnostics and technologies in India. Six Indian ESP specialists were selected by Southern Research Institute and their consultants, with the concurrence of EPA's project officer, to attend a course...

  14. Mathematical modeling of wire-duct single-stage electrostatic precipitators.

    PubMed

    Talaie, M R

    2005-09-30

    A two-dimensional mathematical model was developed to simulate the performance of wire-duct single-stage electrostatic precipitators (ESP). The model presented by Talaie et al. [M.R. Talaie, M. Taheri, J. Fathikaljahi, A new method to evaluate the voltage-current characteristics applicable for a single-stage electrostatic precipitator, J. Electrostat., 53 (3) (2001) 221-233] was used for prediction of electric field strength distribution and V-I characteristic for high-voltage wire-plate configuration. Simple Lagrangian approach was used to predict particle movement. Normal k-epsilon turbulent flow model with considering electrical body force due to ion and charged particle flow was used to evaluate gas velocity distribution. Ignoring the effect of particle movement and fluid flow, the results of electrical part of mathematical model are in good agreement with experimental data of Penny and Matick [G.W. Penny, R.E. Matrick, Potential in DC corona field, Trans. AIEE Part 1, 79 (1960) 91-99]. The prediction of corona sheath radius and its variation with particle loading and applied voltage is the main distinguishing feature of the present model. This fact was not included in the earlier models.

  15. An exemple of particle concentration reduction in Parisian subway stations by electrostatic precipitation.

    PubMed

    Tokarek, S; Bernis, A

    2006-11-01

    The air quality in Parisian subway stations is a great concern to users and the public authorities. Particle concentration is one of the major problems; indeed concentrations observed in stations are generally superior to those collected in the street. The subway generates its own particles from wheels / rail contact, braking, the ground... One of the ways explored to lower this level of particles is a removal treatment: the principle is to treat the ambient air using a suitable system placed in stations. Following literature, the process chosen by Paris Transport Authority is the electrostatic precipitator. An electrostatic precipitator prototype from the Recycl'Air company is installed in May 2001 in a closed station on the 5th line (Italy Place -Bobigny). Results show that, by the end of approximately one year, the efficiency has fallen by 15% and it is therefore necessary to clean the precipitation cartridges. A consideration has also been made on the possibility to equip an entire subway station. According to the results obtained, about twenty filters placed in the top of a non mechanically ventilated station would permit to half an initial concentration in particles of 230 microg m(-3).

  16. Research of vibration controlling based on programmable logic controller for electrostatic precipitator

    NASA Astrophysics Data System (ADS)

    Zhang, Zisheng; Li, Yanhu; Li, Jiaojiao; Liu, Zhiqiang; Li, Qing

    2013-03-01

    In order to improve the reliability, stability and automation of electrostatic precipitator, circuits of vibration motor for ESP and vibration control ladder diagram program are investigated using Schneider PLC with high performance and programming software of Twidosoft. Operational results show that after adopting PLC, vibration motor can run automatically; compared with traditional control system of vibration based on single-chip microcomputer, it has higher reliability, better stability and higher dust removal rate, when dust emission concentrations <= 50 mg m-3, providing a new method for vibration controlling of ESP.

  17. Pilot scale-SO{sub 2} control by dry sodium bicarbonate injection and an electrostatic precipitator

    SciTech Connect

    Pliat, M.J.; Wilder, J.M.

    2007-10-15

    A 500 actual cubic feet gas per minute (acfm) pilot-scale SO{sub 2} control study was undertaken to investigate flue gas desulfurization (FGD) by dry sodium sorbents in 400{sup o}F (204.5{sup o}C) flue gases emitted from a coal fired boiler with flue gas concentrations between 350 and 2500 ppm SO{sub 2}. Powdered sodium alkaline reagents were injected into the hot flue gas downstream of the air preheater and the spent reagents were collected using an electrostatic precipitator. Three different sorbents were used: processed sodium bicarbonate of two particle sizes; solution mined sodium bicarbonate, and processed sodium sesquicarbonate. SO{sub 2} concentrations were measured upstream of the reagent injection, 25-ft (7.62 m) downstream of the injection point, and downstream of the electrostatic precipitator. SO{sub 2} collection efficiencies ranged from 40 to 80% using sodium bicarbonate stoichiometric ratios from 0.5 to 3.0. Much of the in-duct SO{sub 2} removal occurred during the first second of reagent reaction time, indicating that the sulfur dioxide-sodium reaction rates may be faster than have been measured for fixed bed measurements reported in the literature.

  18. Electrostatics

    SciTech Connect

    Wallace, John P.; Wallace, Michael J.

    2015-12-04

    Quantum mechanics should be able to generate the basic properties of a particle. One of the most basic properties are charge and the associated electrostatic electric field. Electrostatic force is a fundamental characteristics of a charged fermion and should have its nature described by the fermion’s structure. To produce the particle properties require two spaces that define both their dynamics and their base structure. Relativity and the conservation of energy dictate how these two separate spaces are connected and the differential equations that describe behavior within these two spaces. The main static characteristic of an elementary fermion are mass and charge. Mass represents a scale measure of the fermion and it appears that charge results from the detailed structure of the fermion, which must merge into the electric field description of Maxwell. Coulomb’s law is a good approximation for large distances, but it is a poor approximation at dimension on the order of a particle’s Compton wavelength. The relativistic description of the fermion in its own frame of reference contains the information required for producing the electrostatic field over all space without a singularity as a source. With this description it is possible to understand the first order correction to the ionization energy of hydrogen. The role of nuclear effects on ionization energies can now be better defined for nuclei heavier than hydrogen.

  19. Toxic and teratogenic effects of chemical class fractions of a coal-gasification electrostatic precipitator tar.

    PubMed

    Schultz, T W; Dumont, J N; Buchanan, M V

    1983-12-01

    Dimethyl sulfoxide slurries of a coal gasifier electrostatic precipitator tar and its chemical class fractions were assayed for their toxicity and teratogenicity using early embryos of the frog Xenopus laevis. Of the 5 tar fractions the ether-soluble base and polyaromatic were found to be the most teratogenic and the ether-soluble acid and ether-soluble base were the most toxic. The teratogenic effects of the raw tar suggest synergism. The toxic effects to newly metamorphosed froglets is 1-2 orders of magnitude less than those observed for embryos. Chemical analysis shows dihydroxybenzenes and organonitrogen compounds to be the major components of the acid and base fractions, respectively. The neutral fractions contain mainly alkyl-substituted two-ring hydrocarbons.

  20. Electrode configurations inside an electrostatic precipitator and their impact on collection efficiency and flow pattern

    NASA Astrophysics Data System (ADS)

    Ning, Zhiyuan; Cheng, Lu; Shen, Xinjun; Li, Shuran; Yan, Keping

    2016-06-01

    Electrostatic precipitator (ESP) units have wide application in lots industries processes as gas filtration devices. Regarding their high efficiency, further improvement is still required. Wide ESP (plate-to-plate distance greater than 400 mm) is one of a promising way to improve existing ESP due to its ability to reduce equipment investment significantly. However, its large-scale application has been limited because it may potentially lead to collection efficiency reduction. This article focuses on the study of two major effects when several different electrode configurations are applied. The electrohydrodynamic (EHD) flow pattern inside ESP and particle collection efficiency were investigated by using particle image velocimetry (PIV) and electrical low pressure impactor (ELPI) respectively. Results suggested that the collection efficiency of wide ESP is rather complicated and highly related to inner gas flow pattern.

  1. Development of a new portable air sampler based on electrostatic precipitation.

    PubMed

    Roux, J M; Sarda-Estève, R; Delapierre, G; Nadal, M H; Bossuet, C; Olmedo, L

    2016-05-01

    Airborne particles are known to cause illness and to influence meteorological phenomena. It is therefore important to monitor their concentrations and to identify them. A challenge is to collect micro and nanoparticles, microorganisms as well as toxic molecules with a device as simple and small as possible to be used easily and everywhere. Electrostatic precipitation is an efficient method to collect all kinds of airborne particles. Furthermore, this method can be miniaturized. A portable, silent, and autonomous air sampler based on this technology is therefore being developed with the final objective to collect very efficiently airborne pathogens such as supermicron bacteria but also submicron viruses. Particles are collected on a dry surface so they may be concentrated afterwards in a small amount of liquid medium to be analyzed. It is shown that nearly 98 % of airborne particles from 10 nm to 3 μm are collected.

  2. Flue gas conditioning for improved particle collection in electrostatic precipitators. First topical report, Results of laboratory screening of additives

    SciTech Connect

    Durham, M.D.

    1993-04-16

    Several tasks have been completed in a program to evaluate additives to improve fine particle collection in electrostatic precipitators. Screening tests and laboratory evaluations of additives are summarized in this report. Over 20 additives were evaluated; four were found to improve flyash precipitation rates. The Insitec particle analyzer was also evaluated; test results show that the analyzer will provide accurate sizing and counting information for particles in the size range of {le} 10 {mu}m dia.

  3. Performance of a pilot-scale wet electrostatic precipitator for the control of sulfuric acid mist.

    PubMed

    Huang, Jiayu; Wang, Hongmei; Shi, Yingjie; Zhang, Fan; Dang, Xiaoqing; Zhang, Hui; Shu, Yun; Deng, Shuang; Liu, Yu

    2016-10-01

    The use of a wet electrostatic precipitator (WESP) is often regarded as a viable option to reduce sulfuric acid mist emitted from the wet flue gas desulfurization (WFGD) tower in coal-fired power plants. In this study, a pilot-scale wet electrostatic precipitator equipped with a wall-cooled collection electrode is investigated for the control of sulfuric acid mist from a simulated WFGD system. The results show that due to partial charging effect, the removal efficiency of sulfuric acid aerosol decreases when the aerosol size decreases to several tens of nanometers. Moreover, due to the plasma-induced effect, a large number of ultrafine sulfuric acid aerosols below 50 nm formed at a voltage higher than 24 kV inside the WESP. The percentages of submicron-sized aerosols significantly increase together with the voltage. To minimize the adverse plasma-induced effect, a WESP should be operated at a high gas velocity with an optimum high voltage. Even at a high flue gas velocity of 2.3 m s(-1), the mass concentration and the total number concentration of uncaptured sulfuric acid aerosols at the WESP outlet are as low as ca. 0.6 mg m(-3) and ca. 10(4) 1 cm(-3) at 28 kV, respectively. The corresponding removal efficiencies were respectively higher than 99.4 and 99.9 % and are very similar to that at 1.1 and 1.6 m s(-1). Moreover, the condensation-induced aerosol growth enhances the removal of sulfuric acid mist inside a WESP and enables a low emission concentration of ca. 0.65 mg m(-3) with a corresponding removal efficiency superior to 99.4 % even at a low voltage of 21 kV, and of ca. 0.35 mg m(-3) with a corresponding removal efficiency superior to 99.6 % at a higher voltage level of 26 kV.

  4. Electrostatic Precipitation of Dust in the Martian Atmosphere: Implications for the Utilization of Resources During Future Manned Exploration Missions

    NASA Technical Reports Server (NTRS)

    Calle, Carlos I.; Clements, Judson S.; Thompson, Samuel M.; Cox, Nathan D.; Hogue, Michael D.; Johansen, Michael R.; Williams, Blakeley S.

    2011-01-01

    Future human missions to Mars will require the utilization of local resources for oxygen, fuel. and water. The In Situ Resource Utilization (ISRU) project is an active research endeavor at NASA to develop technologies that can enable cost effective ways to live off the land. The extraction of oxygen from the Martian atmosphere. composed primarily of carbon dioxide, is one of the most important goals of the Mars ISRU project. The main obstacle is the relatively large amount of dust present in the Martian atmosphere. This dust must be efficiently removed from atmospheric gas intakes for ISRU processing chambers. A common technique to achieve this removal on earth is by electrostatic precipitation, where large electrostatic fields are established in a localized region to precipitate and collect previously charged dust particles. This technique is difficult to adapt to the Martian environment, with an atmospheric pressure of about one-hundredth of the terrestrial atmosphere. At these low pressures. the corona discharges required to implant an electrostatic charge to the particles to be collected is extremely difficult to sustain and the corona easily becomes biopolar. which is unsuitable for particle charging. In this paper, we report on our successful efforts to establish a stable corona under Martian simulated conditions. We also present results on dust collecting efficiencies with an electrostatic precipitator prototype that could be effectively used on a future mission to the red planet

  5. Electrostatic precipitation of dust in the Martian atmosphere: Implications for the utilization of resources during future manned exploration missions

    NASA Astrophysics Data System (ADS)

    Calle, C. I.; Thompson, S. M.; Cox, N. D.; Johansen, M. R.; Williams, B. S.; Hogue, M. D.; Clements, J. S.

    2011-12-01

    Future human missions to Mars will require the utilization of local resources for oxygen, fuel, and water. The In Situ Resource Utilization (ISRU) project is an active research endeavor at NASA to develop technologies that can enable cost effective ways to live off the land. The extraction of oxygen from the Martian atmosphere, composed primarily of carbon dioxide, is one of the most important goals of the Mars ISRU project. The main obstacle is the relatively large amount of dust present in the Martian atmosphere. This dust must be efficiently removed from atmospheric gas intakes for ISRU processing chambers. A common technique to achieve this removal on earth is by electrostatic precipitation, where large electrostatic fields are established in a localized region to charge, precipitate and collect dust particles. This technique is difficult to adapt to the Martian environment, with an atmospheric pressure of about one-hundredth of the terrestrial atmosphere. At these low pressures, the corona discharges required to implant an electrostatic charge to the particles to be collected is extremely difficult to sustain and the corona easily transitions to a glow/streamer discharge, which is unsuitable for particle charging. In this paper, we report on our successful efforts to establish a stable corona under Martian simulated conditions. We also present results on dust collecting efficiencies with an electrostatic precipitator prototype that could be effectively used on a future mission to the red planet.

  6. Ultrafine particle removal and ozone generation by in-duct electrostatic precipitators.

    PubMed

    Poppendieck, Dustin G; Rim, Donghyun; Persily, Andrew K

    2014-01-01

    Human exposure to airborne ultrafine particles (UFP, < 100 nm) has been shown to have adverse health effects and can be elevated in buildings. In-duct electrostatic precipitator filters (ESP) have been shown to be an effective particulate control device for reducing UFP concentrations (20-100 nm) in buildings, although they have the potential to increase indoor ozone concentrations. This study investigated residential ESP filters to reduce ultrafine particles between 4 to 15 nm and quantified the resulting ozone generation. In-duct ESPs were operated in the central air handling unit of a test house. Results for the two tested ESP brands indicate that removal efficiency of 8 to 14 nm particles was near zero and always less than 10% (± 15%), possibly due to particle generation or low charging efficiency. Adding a media filter downstream of the ESP increased the decay rate for particles in the same size range. Continuous operation of one brand of ESP raised indoor ozone concentrations to 77 ppbv and 20 ppbv for a second brand. Using commercial filters containing activated carbon downstream of the installed ESP reduced the indoor steady-state ozone concentrations between 6% and 39%.

  7. Embryotoxic and teratogenic effects of aqueous extracts of tar from a coal gasification electrostatic precipitator.

    PubMed

    Schultz, T W; Dumont, J N; Clark, B R; Buchanan, M V

    1982-01-01

    Aqueous extracts of tar from a coal gasification electrostatic precipitator were tested for its toxic and teratogenic potential in vitro on embryos of the amphibian Xenopus laevis. The 96-h LC50 and EC50 were determined to be 0.83% and 0.48%, respectively. The developmental stage of normal-appearing exposed embryos is not affected by increasing concentrations of the extract. Embryo growth, however, is significantly reduced at concentrations as low as 0.25%. Motility and pigmentation were effectively reduced relative to controls by extract concentrations of 0.5% and greater. Exposed embryos are shorter and stockier than controls. Malformations of head, eyes, viscera, and spine are common, and cartilage formation is abnormal. The epidermis is often hyperplastic, and large blisters occur over the somatic surface. The severity of abnormal development is directly related to the concentration of the toxicant to which the embryos are exposed. Chemical analysis shows that the aqueous extracts contain phenols, furans, monoaromatic and diaromatic hydrocarbons, and mono- and diazaarenes and/or monoaromatic amines.

  8. Electrostatic precipitator performance and trace element emissions from two Kraft recovery boilers.

    PubMed

    Lind, Terttaliisa; Hokkinen, Jouni; Jokiniemi, Jorma K; Hillamo, Risto; Makkonen, Ulla; Raukola, Antti; Rintanen, Jaakko; Saviharju, Kari

    2006-01-15

    Fine particle emissions from combustion sources have gained attention recently due to their adverse effects on human health. The emission depends on the combustion process, fuel, and particulate removal technology. Particle concentrations at Kraft recovery boiler exits are very high, and the boilers are typically equipped with electrostatic precipitators (ESP). However, little data are available on the ESP performance in recovery boilers. Particle concentrations and size distributions were determined at two modern, operating recovery boilers. In addition, we determined the fractional collection efficiency of the ESPs by simultaneous measurements at the ESP inlet and outlet and the particulate emissions of trace metals. The particle mass concentration atthe ESP inlet was 11-24 g/Nm3 at the two boilers. Particle emissions were 30-40 mg/ Nm3 at boiler A and 12-15 mg/Nm3 at boiler B. The particle size distributions had a major particle mode at around 1 microm. These fume particles contained most of the particle mass. The main components in the particles were sodium and sulfate with minor amounts of chloride, potassium, and presumably some carbonate. The ESP collection efficiency was 99.6-99.8% at boiler A and 99.9% at boiler B. The particle penetration through the ESP was below 0.6% in the entire fume particle size range of 0.3-3 microm. Trace element emissions from both boilers were well below the limit values set by EU directive for waste incineration.

  9. Effect of Electrode Thickness for Reducing Ozone Generation in Electrostatic Precipitator

    NASA Astrophysics Data System (ADS)

    Yasumoto, Koji; Zukeran, Akinori; Takagi, Yasuhiro; Ehara, Yoshiyasu; Takahashi, Takeo; Yamamoto, Toshiaki

    The influence of electrode thickness on ozone generation in the electrostatic precipitator(ESP) was experimentally investigated. The experimental ESP was two-stage-type which composed of a prechager, followed by the collecting section. The precharger consists of high voltage electrodes and grounded electrodes. The thickness of high voltage electrode was selected as 0.1, 0.2, 0.5 and 0.8 mm and the grounded electrodes was 1.0mm. The collecting electrode section had parallel-plates configuration. The gases emitted from the diesel engine were diluted with air and introduced into ESP in order to measure the particle counts were attributed to saw type electrode. In the present study, the electric field distribution was caluculated using the commercial coad called “Ansys”. The relationship between the ozone generation and collection efficiency was investigated. As a result, the ozone concentration decreased with decreasing the electrode thickness maintaining the same collection efficiency. This result is attributed to decreasing the dissociation area of O2 in the vicinity of the electrodes.

  10. The Purification and Thermal Recovery of Exhaust Gas with the Wet-type Electrostatic Precipitator

    NASA Astrophysics Data System (ADS)

    Umemiya, Hiromichi; Koike, Hiroshi

    The exhaust gas ejected from engine heat pump contain the injurious materials, SOx, NOx and dust. And it also has a good deal of thermal energy, so thermal recovery from the exhaust gas increases the total C.O.P. of the heat pump system. The experimental study for the purpose of the purification of the exhaust gas and the thermal recovery from exhaust gas has been conducted with the wet-type electrostatic precipitator, which has the advantage of high collection efficiency and the gas-liquid direct heat-exchanism. The experimental results showed that: 1. For the dust, the collection efficiency of 96 % was achieved, when applied voltage was 19,000V. 2. The effect of the alkali absorption of Nox and SOx gases was made sure by the experiment. 3. The fundamental equation which is useful for design method was resolved by kinetic model of charged particle. 4. In the phenomenon of coagulation the velocity constant was decided with "Chemical Kinetics" and so that the density of coagulant, Ca(OH)2 was decided. 5. It is shown that mixing coagulant, Ca(OH)2, was a very effective way to remove the dust particles from the waste water. 6. Thermal energy of 5.3 kW was recovered from exhaust gas, so that total C.O.P. of heat pump system increases from 1.83 to 1.97.

  11. Subtask 2.11 - An Investigation into the EERC Staged Electrostatic Precipitator Concept

    SciTech Connect

    Ye Zhuang; Jay Almlie; Stanley Miller

    2008-03-31

    A new concept of electrostatic precipitator (ESP), named a Staged ESP (an Energy & Environmental Research Center proprietary), was conceived in June 2004. The concept is based on a simple design that can be retrofitted on existing coal-fired power plants to provide high particulate matter (PM) collection efficiency without compromising reliability. A prototype of Staged ESP was designed, fabricated, and tested in two different combustion coal flue gases with different fly ash resistivities. Several design parameters of the Staged ESP were evaluated under various operating conditions to optimize PM collection performance. A set of particulate sampling data, including aerodynamic particle sizer, scanning mobility particle sizer, and U.S. Environmental Protection Agency Method 5 data, was collected to determine PM emissions of the Staged ESP configurations. These data were compared against data collected with a conventional ESP configuration. Compared to PM capture performance in conventional ESPs, an additional 30% to 70% reductions on total PM emissions were achieved for Staged ESPs in flue gas with medium- to high-resistivity fly ashes. Experimental data proved that the Staged ESP concept is capable of achieving higher PM collection efficiency, especially for particles in the submicrometer size range typically thought difficult to capture in an ESP.

  12. Electrostatic precipitation of particulate emissions from the combustion of coal-oil-water and coal-water-slurry in an industrial packaged boiler. Final report

    SciTech Connect

    Noll, C.G.; Dooher, J.R.

    1984-12-01

    The report discusses the results of a research project designed to determine electrostatic-precipitation performance in collecting particulate emissions from coal-oil-water or coal-water slurry fuels. Measurements made on a mobile electrostatic precipitator (ESP) showed that New Source Performance Standards (NSPS) could be met by appropriate design and operation. Coal-oil-water fuels required a specific collection area (SCA) of 340 sq ft/1,000 ACFM flue gas, while coal-water slurry fuel needed 500 sq ft/ACFM flue gas to comply with NSPS. Specific electrode power densities were 200 watts/1,000 ACFM flue gas. The mobile ESP accepted flue gas from a packaged fire-tube boiler converted to coal-slurry firing. The fully instrumented boiler produced a fly-ash high-in carbon content, especially when burning CWS fuel. The high carbon content influenced fly-ash resistivity vs. temperature curves and must be taken into account in designing an ESP for this kind of service.

  13. Enhanced performance of electrostatic precipitators through chemical modification of particle resistivity and cohesion

    SciTech Connect

    Durham, M.D.; Baldrey, K.E.; Bustard, C.J.

    1995-11-01

    Control of fine particles, including particulate air toxics, from utility boilers is required near-term by state and federal air regulations. Electrostatic precipitators (ESP) serve as the primary air pollution control device for the majority of coal-fired utility boilers in the Eastern and Midwestern united States. Cost-effective retrofit technologies for fine particle control, including flue gas conditioning, are needed for the large base of existing ESPs. Flue has conditioning is an attractive option because it requires minimal structural changes and lower capital costs. For flue gas conditioning to be effective for fine particle control, cohesive and particle agglomerating agents are needed to reduce reentrainment losses, since a large percentage of particulate emissions from well-performing ESPs are due to erosion, rapping, and non-rapping reentrainment. A related and somewhat ironic development is that emissions reductions of SO{sub 2} from utility boilers, as required by the Title IV acid rain program of the 1990 Clean Air Act amendments, has the potential to substantially increase particulate air toxics from existing ESPs. The switch to low-sulfur coals as an SO{sub 2} control strategy by many utilities has exacerbated ESP performance problems associated with high resistivity flyash. The use of flue gas conditioning has increased in the past several years to maintain adequate performance in ESPs which were not designed for high resistivity ash. However, commercially available flue gas conditioning systems, including NH{sub 3}/SO{sub 3} dual gas conditioning systems, have problems and inherent drawbacks which create a need for alternative conditioning agents. in particular, NH{sub 3}/SO{sub 3} systems can create odor and ash disposal problems due to ammonia outgassing. In addition, there are concerns over chemical handling safety and the potential for accidental releases.

  14. Control of diesel gaseous and particulate emissions with a tube-type wet electrostatic precipitator.

    PubMed

    Saiyasitpanich, Phirun; Keener, Tim C; Lu, Mingming; Liang, Fuyan; Khang, Soon-Jai

    2008-10-01

    In this study, experiments were performed with a bench-scale tube-type wet electrostatic precipitator (wESPs) to investigate its effectiveness for the removal of mass- and number-based diesel particulate matter (DPM), hydrocarbons (HCs), carbon monoxide (CO), and oxides of nitrogen (NOx) from diesel exhaust emissions. The concentration of ozone (O3) present in the exhaust that underwent a nonthermal plasma treatment process inside the wESP was also measured. A nonroad diesel generator operating at varying load conditions was used as a stationary diesel emission source. The DPM mass analysis was conducted by means of isokinetic sampling and the DPM mass concentration was determined by a gravimetric method. An electrical low-pressure impactor (ELPI) was used to quantify the DPM number concentration. The HC compounds, n-alkanes, and polycyclic aromatic hydrocarbons (PAHs) were collected on a moisture-free quartz filter together with a PUF/XAD/PUF cartridge and extracted in dichloromethane with sonication. Gas chromatography (GC)/mass spectroscopy (MS) was used to determine HC concentrations in the extracted solution. A calibrated gas combustion analyzer (Testo 350) and an O3 analyzer were used for quantifying the inlet and outlet concentrations of CO and NOx (nitric oxide [NO] + nitrogen dioxide [NO2]), and O3 in the diesel exhaust stream. The wESP was capable of removing approximately 67-86% of mass- and number-based DPM at a 100% exhaust volumetric flow rate generated from 0- to 75-kW engine loads. At 75-kW engine load, increasing gas residence time from approximately 0.1 to 0.4 sec led to a significant increase of DPM removal efficiency from approximately 67 to more than 90%. The removal of n-alkanes, 16 PAHs, and CO in the wESP ranged from 31 to 57% and 5 to 38%, respectively. The use of the wESP did not significantly affect NOx concentration in diesel exhaust. The O3 concentration in diesel exhaust was measured to be less than 1 ppm. The main mechanisms

  15. Collection of ultrafine diesel particulate matter (DPM) in cylindrical single-stage wet electrostatic precipitators.

    PubMed

    Saiyasitpanich, Phirun; Keener, Tim C; Lu, Mingming; Khang, Soon-Jai; Evans, Douglas E

    2006-12-15

    Long-term exposures to diesel particulate matter (DPM) emissions are linked to increasing adverse human health effects due to the potential association of DPM with carcinogenicity. Current diesel vehicular particulate emission regulations are based solely upon total mass concentration, albeit it is the submicrometer particles that are highly respirable and the most detrimental to human health. In this study, experiments were performed with a tubular single-stage wet electrostatic precipitator (wESP) to evaluate its performance for the removal of number-based DPM emissions. A nonroad diesel generator utilizing a low sulfur diesel fuel (500 ppmw) operating under varying load conditions was used as a stationary DPM emission source. An electrical low-pressure impactor (ELPI) was used to quantify the number concentration distributions of diesel particles in the diluted exhaust gas at each tested condition. The wESP was evaluated with respect to different operational control parameters such as applied voltage, gas residence time, etc., to determine their effect on overall collection efficiency, as well as particle size dependent collection efficiency. The results show that the total DPM number concentrations in the untreated diesel exhaust are in the magnitude of approximately108/cm(3) at all engine loads with the particle diameter modes between 20 and 40 nm. The measured collection efficiency of the wESP operating at 70 kV based on total particle numbers was 86% at 0 kW engine load and the efficiency decreased to 67% at 75 kW due to a decrease in gas residence time and an increase in particle concentrations. At a constant wESP voltage of 70 kV and at 75 kW engine load, the variation of gas residence time within the wESP from approximately 0.1 to approximately 0.4 s led to a substantial increase in the collection efficiency from 67% to 96%. In addition, collection efficiency was found to be directly related to the applied voltage, with increasing collection efficiency

  16. Soft-X-Ray-Enhanced Electrostatic Precipitation for Protection against Inhalable Allergens, Ultrafine Particles, and Microbial Infections

    PubMed Central

    Kettleson, Eric M.; Schriewer, Jill M.; Buller, R. Mark L.

    2013-01-01

    Protection of the human lung from infectious agents, allergens, and ultrafine particles is difficult with current technologies. High-efficiency particulate air (HEPA) filters remove airborne particles of >0.3 μm with 99.97% efficiency, but they are expensive to maintain. Electrostatic precipitation has been used as an inexpensive approach to remove large particles from airflows, but it has a collection efficiency minimum in the submicrometer size range, allowing for a penetration window for some allergens and ultrafine particles. Incorporating soft X-ray irradiation as an in situ component of the electrostatic precipitation process greatly improves capture efficiency of ultrafine particles. Here we demonstrate the removal and inactivation capabilities of soft-X-ray-enhanced electrostatic precipitation technology targeting infectious agents (Bacillus anthracis, Mycobacterium bovis BCG, and poxviruses), allergens, and ultrafine particles. Incorporation of in situ soft X-ray irradiation at low-intensity corona conditions resulted in (i) 2-fold to 9-fold increase in capture efficiency of 200- to 600-nm particles and (ii) a considerable delay in the mean day of death as well as lower overall mortality rates in ectromelia virus (ECTV) cohorts. At the high-intensity corona conditions, nearly complete protection from viral and bacterial respiratory infection was afforded to the murine models for all biological agents tested. When optimized for combined efficient particle removal with limited ozone production, this technology could be incorporated into stand-alone indoor air cleaners or scaled for installation in aircraft cabin, office, and residential heating, ventilating, and air-conditioning (HVAC) systems. PMID:23263945

  17. Economic comparison of fabric filters and electrostatic precipitators for particulate control on coal-fired utility boilers

    NASA Technical Reports Server (NTRS)

    Cukor, P. M.; Chapman, R. A.

    1978-01-01

    The uncertainties and associated costs involved in selecting and designing a particulate control device to meet California's air emission regulations are considered. The basic operating principles of electrostatic precipitators and fabric filters are discussed, and design parameters are identified. The size and resulting cost of the control device as a function of design parameters is illustrated by a case study for an 800 MW coal-fired fired utility boiler burning a typical southwestern subbituminous coal. The cost of selecting an undersized particulate control device is compared with the cost of selecting an oversized device.

  18. Development of an Electrostatic Precipitator to Remove Martian Atmospheric Dust from ISRU Gas Intakes During Planetary Exploration Missions

    NASA Technical Reports Server (NTRS)

    Clements, J. Sidney; Thompson, Samuel M.; Cox, Nathan D.; Johansen, Michael R.; Williams, Blakeley S.; Hogue, Michael D.; Lowder, M. Loraine; Calle, Carlos I.

    2011-01-01

    Manned exploration missions to Mars will need dependable in situ resource utilization (ISRU) for the production of oxygen and other commodities. One of these resources is the Martian atmosphere itself, which is composed of carbon dioxide (95.3%), nitrogen (2.7%), argon (1.6%), oxygen (0.13%), carbon monoxide (0.07%), and water vapor (0.03%), as well as other trace gases. However, the Martian atmosphere also contains relatively large amounts of dust, uploaded by frequent dust devils and high Winds. To make this gas usable for oxygen extraction in specialized chambers requires the removal of most of the dust. An electrostatic precipitator (ESP) system is an obvious choice. But with an atmospheric pressure just one-hundredth of Earth's, electrical breakdown at low voltages makes the implementation of the electrostatic precipitator technology very challenging. Ion mobility, drag forces, dust particle charging, and migration velocity are also affected because the low gas pressure results in molecular mean free paths that are approximately one hundred times longer than those at Earth .atmospheric pressure. We report here on our efforts to develop this technology at the Kennedy Space Center, using gases with approximately the same composition as the Martian atmosphere in a vacuum chamber at 9 mbars, the atmospheric pressure on Mars. We also present I-V curves and large particle charging data for various versions of wire-cylinder and rod-cylinder geometry ESPs. Preliminary results suggest that use of an ESP for dust collection on Mars may be feasible, but further testing with Martian dust simulant is required.

  19. Novel Wire-on-Plate Electrostatic Precipitator (WOP-EP) for Controlling Fine Particle and Nanoparticle Pollution.

    PubMed

    Li, Ziyi; Liu, Yingshu; Xing, Yi; Tran, Thi-Minh-Phuong; Le, Thi-Cuc; Tsai, Chuen-Jinn

    2015-07-21

    A new wire-on-plate electrostatic precipitator (WOP-EP), where discharge wires are attached directly on the surface of a dielectric plate, was developed to ease the installation of the wires, minimize particle deposition on the wires, and lower ozone emission while maintaining a high particle collection efficiency. For a lab-scale WOP-EP (width, 50 mm; height, 20 mm; length, 180 mm) tested at the applied voltage of 18 kV, experimental total particle collection efficiencies were found as high as 90.9-99.7 and 98.8-99.9% in the particle size range of 30-1870 nm at the average air velocities of 0.50 m/s (flow rate, 30 L/min; residence time, 0.36 s) and 0.25 m/s (flow rate, 15 L/min; residence time, 0.72 s), respectively. Particle collection efficiencies calculated by numerical models agreed well with the experimental results. The comparison to the traditional wire-in-plate EP showed that, at the same applied voltage, the current WOP-EP emitted 1-2 orders of magnitude lower ozone concentration, had cleaner discharge wires after heavy particle loading in the EP, and recovered high particle collection efficiency after the grounded collection plate was cleaned. It is expected that the current WOP-EP can be scaled up as an efficient air-cleaning device to control fine particle and nanoparticle pollution.

  20. Mercury emissions from coal combustion: modeling and comparison of Hg capture in a fabric filter versus an electrostatic precipitator.

    PubMed

    Scala, Fabrizio; Clack, Herek L

    2008-04-01

    Mercury emissions from coal combustion must be reduced, in response to new air quality regulations in the U.S. Although the most mature control technology is adsorption across a dust cake of powdered sorbent in a fabric filter (FF), most particulate control in the U.S. associated with coal combustion takes the form of electrostatic precipitation (ESP). Using recently developed models of mercury adsorption within an ESP and within a growing sorbent bed in a FF, parallel analyses of elemental mercury (Hg(0)) uptake have been conducted. The results show little difference between an ESP and a FF in absolute mercury removal for a low-capacity sorbent, with a high-capacity sorbent achieving better performance in the FF. Comparisons of fractional mercury uptake per-unit-pressure-drop provide a means for incorporating and comparing the impact of the much greater pressure drop of a FF as compared to an ESP. On a per-unit-pressure-drop basis, mercury uptake within an ESP exhibited better performance, particularly for the low-capacity sorbent and high mass loadings of both sorbents.

  1. Estimates of increased black carbon emissions from electrostatic precipitators during powdered activated carbon injection for mercury emissions control.

    PubMed

    Clack, Herek L

    2012-07-03

    The behavior of mercury sorbents within electrostatic precipitators (ESPs) is not well-understood, despite a decade or more of full-scale testing. Recent laboratory results suggest that powdered activated carbon exhibits somewhat different collection behavior than fly ash in an ESP and particulate filters located at the outlet of ESPs have shown evidence of powdered activated carbon penetration during full-scale tests of sorbent injection for mercury emissions control. The present analysis considers a range of assumed differential ESP collection efficiencies for powdered activated carbon as compared to fly ash. Estimated emission rates of submicrometer powdered activated carbon are compared to estimated emission rates of particulate carbon on submicrometer fly ash, each corresponding to its respective collection efficiency. To the extent that any emitted powdered activated carbon exhibits size and optical characteristics similar to black carbon, such emissions could effectively constitute an increase in black carbon emissions from coal-based stationary power generation. The results reveal that even for the low injection rates associated with chemically impregnated carbons, submicrometer particulate carbon emissions can easily double if the submicrometer fraction of the native fly ash has a low carbon content. Increasing sorbent injection rates, larger collection efficiency differentials as compared to fly ash, and decreasing sorbent particle size all lead to increases in the estimated submicrometer particulate carbon emissions.

  2. Filtering Chromatic Aberration for Wide Acceptance Angle Electrostatic Lenses II--Experimental Evaluation and Software-Based Imaging Energy Analyzer.

    PubMed

    Fazekas, Ádám; Daimon, Hiroshi; Matsuda, Hiroyuki; Tóth, László

    2016-03-01

    Here, the experimental results of the method of filtering the effect of chromatic aberration for wide acceptance angle electrostatic lens-based system are described. This method can eliminate the effect of chromatic aberration from the images of a measured spectral image sequence by determining and removing the effect of higher and lower kinetic energy electrons on each different energy image, which leads to significant improvement of image and spectral quality. The method is based on the numerical solution of a large system of linear equations and equivalent with a multivariate strongly nonlinear deconvolution method. A matrix whose elements describe the strongly nonlinear chromatic aberration-related transmission function of the lens system acts on the vector of the ordered pixels of the distortion free spectral image sequence, and produces the vector of the ordered pixels of the measured spectral image sequence. Since the method can be applied not only on 2D real- and $k$ -space diffraction images, but also along a third dimension of the image sequence that is along the optical or in the 3D parameter space, the energy axis, it functions as a software-based imaging energy analyzer (SBIEA). It can also be applied in cases of light or other type of optics for different optical aberrations and distortions. In case of electron optics, the SBIEA method makes possible the spectral imaging without the application of any other energy filter. It is notable that this method also eliminates the disturbing background significantly in the present investigated case of reflection electron energy loss spectra. It eliminates the instrumental effects and makes possible to measure the real physical processes better.

  3. COOLING TIME, FREEFALL TIME, AND PRECIPITATION IN THE CORES OF ACCEPT GALAXY CLUSTERS

    SciTech Connect

    Voit, G. Mark; Donahue, Megan

    2015-01-20

    Star formation in the universe's largest galaxies—the ones at the centers of galaxy clusters—depends critically on the thermodynamic state of their hot gaseous atmospheres. Central galaxies with low-entropy, high-density atmospheres frequently contain multiphase star-forming gas, while those with high-entropy, low-density atmospheres never do. The dividing line between these two populations in central entropy, and therefore central cooling time, is amazingly sharp. Two hypotheses have been proposed to explain the dichotomy. One points out that thermal conduction can prevent radiative cooling of cluster cores above the dividing line. The other holds that cores below the dividing line are subject to thermal instability that fuels the central active galactic nucleus (AGN) through a cold-feedback mechanism. Here we explore those hypotheses with an analysis of the Hα properties of ACCEPT galaxy clusters. We find that the two hypotheses are likely to be complementary. Our results support a picture in which cold clouds inevitably precipitate out of cluster cores in which cooling outcompetes thermal conduction and rain down on the central black hole, causing AGN feedback that stabilizes the cluster core. In particular, the observed distribution of the cooling-time to freefall-time ratio is nearly identical to that seen in simulations of this cold-feedback process, implying that cold-phase accretion, and not Bondi-like accretion of hot-phase gas, is responsible for the AGN feedback that regulates star formation in large galaxies.

  4. Determination of cadmium in tobacco smoke by electrothermal atomic absorption spectroscopy with electrostatic precipitation of samples on the graphite tube atomizer

    NASA Astrophysics Data System (ADS)

    Altman, E. L.; Panichev, N. A.

    2003-05-01

    The determination of Cd in ambient air, associated with tobacco smoke, has been carried out by electrostatic precipitation of Cd directly in a graphite tube, which was subsequently used as an atomizer in electrothermal atomization atomic absorption spectroscopy (ET-AAS). It is shown that graphite tube permanently modified with Ir allows carrying out pyrolysis of collected samples at 1000^circC, leading to minimization of the blank. The combination of electrostatic precipitation of Cd from ambient air into the graphite tube with high efficiency of Cd determination by ET-AAS allows to trace Cd in ambient air for 25 min after the smoking a cigarette. The limit of detection (LOD) of Cd determination was found to be 0.2 ng m^{-3} The results of investigations confirm the danger of passive smoking due to the presence of Cd in smoking areas.

  5. Polycyclic aromatic hydrocarbon emission profiles and removal efficiency by electrostatic precipitator and wetfine scrubber in an iron ore sintering plant

    SciTech Connect

    Ettore Guerriero; Antonina Lutri; Rosanna Mabilia; Maria Concetta Tomasi Sciano; Mauro Rotatori

    2008-11-15

    A monitoring campaign of polychlorinated dibenzo-p-dioxins and dibenzofurans, polyaromatic hydrocarbons (PAHs), and polychlorinated biphenyl was carried out in an Italian iron ore sintering plant by sampling the combustion gases at the electrostatic precipitator (ESP) outlet, at the Wetfine scrubber (WS) outlet, and by collecting the ESP dust. Few data are available on these micropollutants produced in iron ore sintering plants, particularly from Italian plants. This study investigates the PAH emission profiles and the removal efficiency of ESPs and WS. PAHs were determined at the stack, ESP outlet flue gases, and in ESP dust to characterize the emission profiles and the performance of the ESP and the WS for reducing PAH emission. The 11 PAHs monitored are listed in the Italian legislative decree 152/2006. The mean total PAH sum concentration in the stack flue gases is 3.96 {mu}g/N m{sup 3}, in ESP outlet flue gases is 9.73 {mu}g/N m{sup 3}, and in ESP dust is 0.53 {mu}g/g. Regarding the emission profiles, the most abundant compound is benzo(b)fluoranthene, which has a relative low BaP toxic equivalency factors (TEF) value, followed by dibenzo(a,l)pyrene, which has a very high BaP(TEF) value. The emission profiles in ESP dust and in the flue gases after the ESP show some changes, whereas the fingerprint in ESP and stack flue gases is very similar. The removal efficiency of the ESP and of WS on the total PAH concentration is 5.2 and 59.5%, respectively. 2 figs., 5 tabs.

  6. Simultaneous treatment of NO and SO2 with aqueous NaClO2 solution in a wet scrubber combined with a plasma electrostatic precipitator.

    PubMed

    Park, Hyun-Woo; Choi, Sooseok; Park, Dong-Wha

    2015-03-21

    NO and SO2 gases that are generally produced in thermal power plants and incinerators were simultaneously removed by using a wet scrubber combined with a plasma electrostatic precipitator. The wet scrubber was used for the absorption and oxidation of NO and SO2, and non-thermal plasma was employed for the electrostatic precipitation of aerosol particles. NO and SO2 gases were absorbed and oxidized by aerosol particles of NaClO2 solution in the wet scrubber. NO and SO2 reacted with the generated NaClO2 aerosol particles, NO2 gas, and aqueous ions such as NO2(-), NO3(-), HSO3(-), and SO4(2-). The aerosol particles were negatively charged and collected on the surface of grounded anode in the plasma electrostatic precipitator. The NO and SO2 removal efficiencies of the proposed system were 94.4% and 100% for gas concentrations of 500 mg/m(3) and a total gas flow rate of 60 Nm(3)/h, when the molar flow rate of NaClO2 and the gas-liquid contact time were /min and 1.25 s, respectively. The total amount and number of aerosol particles in the exhaust gas were reduced to 7.553 μg/m(3) and 210/cm(3) at the maximum plasma input power of 68.8 W, which are similar to the values for clean air.

  7. Staged electrostatic precipitator

    DOEpatents

    Miller, Stanley J.; Almlie, Jay C.; Zhuang, Ye

    2016-03-01

    A device includes a chamber having an air inlet and an air outlet. The device includes a plurality of stages including at least a first stage adjacent a second stage. The plurality of stages are disposed in the chamber and each stage has a plurality of discharge electrodes disposed in an interior region and is bounded by an upstream baffle on an end proximate the air inlet and bounded by a downstream baffle on an end proximate the air outlet. Each stage has at least one sidewall between the upstream baffle and the downstream baffle. The sidewall is configured as a collection electrode and has a plurality of apertures disposed along a length between the upstream baffle and the downstream baffle. The upstream baffle of the first stage is positioned in staggered alignment relative to the upstream baffle of the second stage and the downstream baffle of the first stage are positioned in staggered alignment relative to the downstream baffle of the second stage.

  8. Martian Environment Electrostatic Precipitator

    NASA Technical Reports Server (NTRS)

    McDougall, Michael Owen

    2016-01-01

    As part of the planned manned mission to Mars, NASA has noticed that shipping oxygen as a part of life support to keep the astronauts alive continuously is overly expensive, and impractical. As such, noting that the Martian atmosphere is 95.37% CO2, NASA chemists noted that one could obtain oxygen from the Martian atmosphere. The plan, as part of a larger ISRU (in-situ resource utilization) initiative, would extract water from the regolith, or the Martian soil which can be electrolyzed by solar panel produced voltage into hydrogen and oxygen. The hydrogen can then be used in the Sabatier reaction with carbon dioxide to produce methane and water producing a net reaction that does not lose water and outputs methane and oxygen for use as rocket fuel and breathing.

  9. TI-59 programmable calculator programs for in-stack opacity, venturi scrubbers, and electrostatic precipitators. User manual Jul 78-Jul 79

    SciTech Connect

    Cowen, S.J.; Ensor, D.S.; Sparks, L.E.

    1980-05-01

    The report explains the basic concepts of in-stack opacity as measured by in-stack opacity monitors. Also included are calculator programs that model the performance of venturi scrubbers and electrostatic precipitators. The effect of particulate control devices on in-stack opacity can be predicted by using these programs. The size distribution data input can be either in lognormal or histogram format. The opacity is calculated using Deirmendjian's approximation to Mie series to obtain extinction efficiencies. An alternative opacity program employing the exact Mie series solution is also described. The running time for this program is about 8 hours; that for the approximation program is 30 minutes. The accuracy of these programs is as good as the measured data input.

  10. Final technical report: SRC burn test in 700-hp oil-designed boiler. Annex Volume D. Electrostatic precipitator mass train and operating data

    SciTech Connect

    Not Available

    1983-09-01

    Solvent Refined Coal (SRC) is one of the viable replacement fuels for No. 6 fuel oil in industrial and utility boilers. The Department of Energy funded the International Coal Refining Company (ICRC) to develop and to demonstrate the use of SRC as a practical fuel. Phase II of the project was to burn the SRC fuels in a 700 hp package boiler and to collect emission data from which air pollution control devices could be specified. Wheelabrator-Frye, Inc., APC Division was contracted by ICRC to supply and operate a pilot electrostatic precipitator (ESP). Mass emission testing was performed by WFI Sciences. Particle size tests, particle resistivity, SO/sub x/ measurements, and particulate counting tests were conducted by Southern Research Institute (SoRI). This report is a source document covering the ESP operating data and mass emission data. The data obtained by SoRI is used by SoRI in their computer model to specify full scale design criteria. The testing was performed with four fuel types; No. 6 fuel oil, SRC fuel, SRC residual fuel oil, and SRC-water slurry. All fuels were precipitated quite easily resulting in emission rates below the NSPS standards.

  11. Performance and economic assessment of an improved electrostatic precipitator electrode design for fine-particulate collection. Technical progress report

    SciTech Connect

    Not Available

    1981-01-01

    The report covers work done on this Project (WAVY) during the 1981 fiscal year and discusses the follow-on work planned for FY 1982. A laboratory facility was designed and constructed for testing the new wavy plate configuration for precipitator collection electrodes. Materials required for the test program were specified and ordered. Computer programs were prepared for making theoretical predictions of the collection behavior of wavy plates and for evaluating data taken during the test program. Tests are planned for conventional and wavy plates in order to complete the two proof-concept tasks. A comparison of wavy plate configurations is also scheduled for bench scale studies.

  12. Flue gas conditioning for improved particle collection in electrostatic precipitators. Quarterly technical progress report, October 1--December 31, 1992

    SciTech Connect

    Durham, M.D.

    1993-01-15

    It is concluded that the laboratory tests should be conducted at high levels of SO{sub 3} such that the resulting resistivity is in the range of 10{sup 7}--10{sup 8} ohm-cm. There are several reasons leading to this conclusion. At SO{sub 3} concentrations of 30 ppM and greater, the curves for both dew point and resistivity are relatively flat so that changes in gas phase SO{sub 3} will have minimal impact on particle characteristics. In addition, the electrostatic forces are relatively flat in this range so that changes in flue gas conditions will that result in a change in resistivity by up to two orders of magnitude will have little effect on the magnitude of reentrainment. Finally, at the very low resistivity conditions, reentrainment will be the highest. Since the purpose of the laboratory resistivity tests is to determine the relative ability of the various additives to reduce resistivity, the greater the reentrainment, the easier it will be to measure an improvement. Tests were conducted by first operating at baseline conditions with no additives and then repeating the test with additives. The data collected during each test includes the resistivity of the material, thickness of the collected dust layer, and subjective indications of the dust characteristics. The candidate additives were from the polymer group, cellulose derivatives, starches and gums, and oils. No waxes or synthetic compounds have been tested to date in the laboratory apparatus. Of the seventeen additives tested, eight appeared to have a positive impact on either the ash layer thickness or the physical appearance of the dust layer. Excessive deposits on the discharge electrode resulted during injection of some of the additives. Three of the additives resulted in significant deposits in the injection chamber. The build up on the electrode was interpreted as a positive indicator of increase particle adhesion. The initial observations and comments for the eight additives are listed in Table 1.

  13. VOCs elimination and health risk reduction in e-waste dismantling workshop using integrated techniques of electrostatic precipitation with advanced oxidation technologies.

    PubMed

    Chen, Jiangyao; Huang, Yong; Li, Guiying; An, Taicheng; Hu, Yunkun; Li, Yunlu

    2016-01-25

    Volatile organic compounds (VOCs) emitted during the electronic waste dismantling process (EWDP) were treated at a pilot scale, using integrated electrostatic precipitation (EP)-advanced oxidation technologies (AOTs, subsequent photocatalysis (PC) and ozonation). Although no obvious alteration was seen in VOC concentration and composition, EP technology removed 47.2% of total suspended particles, greatly reducing the negative effect of particles on subsequent AOTs. After the AOT treatment, average removal efficiencies of 95.7%, 95.4%, 87.4%, and 97.5% were achieved for aromatic hydrocarbons, aliphatic hydrocarbons, halogenated hydrocarbons, as well as nitrogen- and oxygen-containing compounds, respectively, over 60-day treatment period. Furthermore, high elimination capacities were also seen using hybrid technique of PC with ozonation; this was due to the PC unit's high loading rates and excellent pre-treatment abilities, and the ozonation unit's high elimination capacity. In addition, the non-cancer and cancer risks, as well as the occupational exposure cancer risk, for workers exposed to emitted VOCs in workshop were reduced dramatically after the integrated technique treatment. Results demonstrated that the integrated technique led to highly efficient and stable VOC removal from EWDP emissions at a pilot scale. This study points to an efficient approach for atmospheric purification and improving human health in e-waste recycling regions.

  14. Apparatus and method for improving electrostatic precipitator performance by plasma reactor conversion of SO.sub.2 to SO.sub.3

    DOEpatents

    Huang, Hann-Sheng; Gorski, Anthony J.

    1999-01-01

    An apparatus and process that utilize a low temperature nonequilibrium plasma reactor, for improving the particulate removal efficiency of an electrostatic precipitator (ESP) are disclosed. A portion of the flue gas, that contains a low level of SO.sub.2 O.sub.2 H.sub.2 O, and particulate matter, is passed through a low temperature plasma reactor, which defines a plasma volume, thereby oxidizing a portion of the SO.sub.2 present in the flue gas into SO.sub.3. An SO.sub.2 rich flue gas is thereby generated. The SO.sub.3 rich flue gas is then returned to the primary flow of the flue gas in the exhaust treatment system prior to the ESP. This allows the SO.sub.3 to react with water to form H.sub.2 SO.sub.4 that is in turn is absorbed by fly ash in the gas stream in order to improve the removal efficiency of the EPS.

  15. Characteristics and the behavior in electrostatic precipitators of high-alumina coal fly ash from the Jungar power plant, Inner Mongolia, China.

    PubMed

    Qi, Liqiang; Yuan, Yongtao

    2011-08-15

    In China, flue gases emitted by coal-fired power plants are mainly cleaned using electrostatic precipitators (ESPs). However, based on observations, there is a decrease in the collection efficiency of ESPs in some power plants after burning Jungar coal in Inner Mongolia. In order to find the mechanism of coal fly ash escaping from ESPs, the size distribution, resistivity, and cohesive force of particulate matter samples from Jungar coal-fired power plants in China were measured using a Bahco centrifuge, a dust electrical resistivity test instrument, and a cohesive force test apparatus invented by the authors. Experiments were carried out to determine the chemical composition and current-voltage curve of fly ash under operating ESPs. The Al(2)O(3) content in fly ash was found to reach more than 50%, with the size distribution showing a higher content of PM2.5 and PM10 in high-alumina coal fly ash than in other coal fly ashes. The resistivity of high-alumina coal fly ash was recorded at over 10(12)Ω cm, but this did not result in a clear back corona. The cohesive force of high-alumina coal fly ash was very little. It was sensitive to smoke speed in the electric field, facilitating dust re-entrainment.

  16. Submicrometer particle removal indoors by a novel electrostatic precipitator with high clean air delivery rate, low ozone emissions, and carbon fiber ionizer.

    PubMed

    Kim, H-J; Han, B; Kim, Y-J; Oda, T; Won, H

    2013-10-01

    A novel positive-polarity electrostatic precipitator (ESP) was developed using an ionization stage (0.4 × 0.4 × 0.14 m(3) ) with 16 carbon fiber ionizers in each channel and a collection stage (0.4 × 0.4 × 0.21 m(3) ) with parallel metallic plates. The single-pass collection efficiency and clean air delivery rate (CADR) were measured by standard tests using KCl particles in 0.25-0.35 μm. Performance was determined using the Deutsch equation and established diffusion and field charging theories and also compared with the commercialized HEPA filter-type air cleaner. Experimental results showed that the single-pass collection efficiency of the ESP ranged from 50 to 95% and decreased with the flow rate (10-20 m(3) /min), but increased with the voltage applied to the ionizers (6 to 8 kV) and collection plates (-5 to -7 kV). The ESP with 18 m(3) /min achieved a CADR of 12.1 m(3) /min with a voltage of 8 kV applied to the ionization stage and with a voltage of -6 kV applied to the collection stage. The concentration of ozone in the test chamber (30.4 m(3) ), a maximum value of 5.4 ppb over 12 h of continuous operation, was much lower than the current indoor regulation (50 ppb).

  17. Removal kinetics for gaseous NO and SO2 by an aqueous NaClO2 solution mist in a wet electrostatic precipitator.

    PubMed

    Park, Hyun-Woo; Park, Dong-Wha

    2017-04-01

    Removal kinetics for NO and SO2 by NaClO2 solution mist were investigated in a wet electrostatic precipitator. By varying the molar concentrations of NO, SO2, and NaClO2, the removal rates of NO and SO2 confirmed to range from 34.8 to 72.9 mmol/m(3) s and 36.6 to 84.7 mmol/m(3) s, respectively, at a fixed gas residence time of 0.25 s. The rate coefficients of NO and SO2 were calculated to be 0.679 (mmol/m(3))(-0.33) s(-1) and 1.401 (mmol/m(3))(-0.1) s(-1) based on the rates of the individual removal of NO and SO2. Simultaneous removal of NO and SO2 investigated after the evaluation of removal rates for their individual treatment was performed. At a short gas residence time, SO2 gas removed more quickly by a mist of NaClO2 solution than NO gas in simultaneous removal experiments. This is because SO2 gas, which has a relatively high solubility in solution, was absorbed more rapidly at the gas-liquid interface than NO gas. NO and SO2 gases were absorbed as nitrite [Formula: see text] and sulfite [Formula: see text] ions, respectively, by the NaClO2 solution mist at the gas-liquid interface. Then, [Formula: see text] and [Formula: see text] were oxidized to nitrate [Formula: see text] and sulfate [Formula: see text], respectively, by reactions with [Formula: see text], ClO2, HClO, and ClO in the liquid phase.

  18. Partitioning of mercury, arsenic, selenium, boron, and chloride in a full-scale coal combustion process equipped with selective catalytic reduction, electrostatic precipitation, and flue gas desulfurization systems

    SciTech Connect

    Chin-Min Cheng; Pauline Hack; Paul Chu; Yung-Nan Chang; Ting-Yu Lin; Chih-Sheng Ko; Po-Han Chiang; Cheng-Chun He; Yuan-Min Lai; Wei-Ping Pan

    2009-09-15

    A full-scale field study was carried out at a 795 MWe coal-fired power plant equipped with selective catalytic reduction (SCR), an electrostatic precipitator (ESP), and wet flue gas desulfurization (FGD) systems to investigate the distribution of selected trace elements (i.e., mercury, arsenic, selenium, boron, and chloride) from coal, FGD reagent slurry, makeup water to flue gas, solid byproduct, and wastewater streams. Flue gases were collected from the SCR outlet, ESP inlet, FGD inlet, and stack. Concurrent with flue gas sampling, coal, bottom ash, economizer ash, and samples from the FGD process were also collected for elemental analysis. By combining plant operation parameters, the overall material balances of selected elements were established. The removal efficiencies of As, Se, Hg, and B by the ESP unit were 88, 56, 17, and 8%, respectively. Only about 2.5% of Cl was condensed and removed from flue gas by fly ash. The FGD process removed over 90% of Cl, 77% of B, 76% of Hg, 30% of Se, and 5% of As. About 90% and 99% of the FGD-removed Hg and Se were associated with gypsum. For B and Cl, over 99% were discharged from the coal combustion process with the wastewater. Mineral trona (trisodium hydrogendicarbonate dehydrate, Na{sub 3}H(CO{sub 3}){sub 2}.2H{sub 2}O) was injected before the ESP unit to control the emission of sulfur trioxide (SO{sub 3}). By comparing the trace elements compositions in the fly ash samples collected from the locations before and after the trona injection, the injection of trona did not show an observable effect on the partitioning behaviors of selenium and arsenic, but it significantly increased the adsorption of mercury onto fly ash. The stack emissions of mercury, boron, selenium, and chloride were for the most part in the gas phase. 47 refs., 3 figs., 11 tabs.

  19. Integration of a nonmetallic electrostatic precipitator and a wet scrubber for improved removal of particles and corrosive gas cleaning in semiconductor manufacturing industries.

    PubMed

    Kim, Hak-Joon; Han, Bangwoo; Kim, Yong-Jin; Yoa, Seok-Jun; Oda, Tetsuji

    2012-08-01

    To remove particles in corrosive gases generated by semiconductor industries, we have developed a novel non-metallic, two-stage electrostatic precipitator (ESP). Carbon brush electrodes and grounded carbon fiber-reinforced polymer (CFRP) form the ionization stage, and polyvinyl chloride collection plates are used in the collection stage of the ESP The collection performance of the ESP downstream of a wet scrubber was evaluated with KC1, silica, and mist particles (0.01-10 pm), changing design and operation parameters such as the ESP length, voltage, and flow rate. A long-term and regeneration performance (12-hr) test was conducted at the maximum operation conditions of the scrubber and ESP and the performance was then demonstrated for 1 month with exhaust gases from wet scrubbers at the rooftop of a semiconductor manufacturing plant in Korea. The results showed that the electrical and collection performance of the ESP (16 channels, 400x400 mm2) was maintained with different grounded plate materials (stainless steel and CFRP) and different lengths of the ionization stage. The collection efficiency of the ESP at high air velocity was enhanced with increases in applied voltages and collection plate lengths. The ESP (16 channels with 100 mm length, 400x400 mm2x540 mm with a 10-mm gap) removed more than 90% of silica and mistparticles with 10 and 12 kV applied to the ESPat the air velocity of 2 m/s and liquid-to-gas ratio of 3.6 L/m3. Decreased performance after 13 hours ofcontinuous operation was recovered to the initial performance level by 5 min of water washing. Moreover during the 1-month operation at the demonstration site, the ESP showed average collection efficiencies of 97% based on particle number and 92% based on total particle mass, which were achieved with a much smaller specific corona power of 0.28 W/m3/hr compared with conventional ESPs.

  20. 40 CFR 60.5175 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection..., fabric filter, electrostatic precipitator, activated carbon injection, or afterburner, or if I limit... device other than a wet scrubber, fabric filter, electrostatic precipitator, activated carbon...

  1. 40 CFR 60.5175 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection..., fabric filter, electrostatic precipitator, activated carbon injection, or afterburner, or if I limit... device other than a wet scrubber, fabric filter, electrostatic precipitator, activated carbon...

  2. 40 CFR 60.5175 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection..., fabric filter, electrostatic precipitator, activated carbon injection, or afterburner, or if I limit... device other than a wet scrubber, fabric filter, electrostatic precipitator, activated carbon...

  3. 40 CFR 60.5175 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection..., fabric filter, electrostatic precipitator, activated carbon injection, or afterburner, or if I limit... device other than a wet scrubber, fabric filter, electrostatic precipitator, activated carbon...

  4. Electrostatic Toys.

    ERIC Educational Resources Information Center

    Greenslade, Thomas B., Jr.

    1982-01-01

    Describes typical electrostatic toys which may be used to show students phenomena associated with sparks, sudden drops in potential, induction, and forces between bodies of like and opposite charges. Many of these demonstrations are suitable for student projects. (Author/JN)

  5. H2S-Modified Fe-Ti Spinel: A Recyclable Magnetic Sorbent for Recovering Gaseous Elemental Mercury from Flue Gas as a Co-Benefit of Wet Electrostatic Precipitators.

    PubMed

    Zou, Sijie; Liao, Yong; Xiong, Shangchao; Huang, Nan; Geng, Yang; Yang, Shijian

    2017-03-21

    The nonrecyclability of the sorbents used to capture Hg(0) from flue gas causes a high operation cost and the potential risk of exposure to Hg. The installation of wet electrostatic precipitators (WESPs) in coal-fired plants makes possible the recovery of spent sorbents for recycling and the centralized control of Hg pollution. In this work, a H2S-modified Fe-Ti spinel was developed as a recyclable magnetic sorbent to recover Hg(0) from flue gas as a co-benefit of the WESP. Although the Fe-Ti spinel exhibited poor Hg(0) capture activity in the temperature range of flue gas downstream of flue gas desulfurization, the H2S-modified Fe-Ti spinel exhibited excellent Hg(0) capture performance with an average adsorption rate of 1.92 μg g(-1) min(-1) at 60 °C and a capacity of 0.69 mg g(-1) (5% of the breakthrough threshold) due to the presence of S2(2-) on its surface. The five cycles of Hg(0) capture, Hg(0) recovery, and sorbent regeneration demonstrated that the ability of the modified Fe-Ti spinel to capture Hg(0) did not degrade remarkably. Meanwhile, the ultralow concentration of Hg(0) in flue gas was increased to a high concentration of Hg(0), which facilitated the centralized control of Hg pollution.

  6. Electrostatic monitoring

    DOEpatents

    Orr, Christopher Henry; Luff, Craig Janson; Dockray, Thomas; Macarthur, Duncan Whittemore

    2001-01-01

    The apparatus and method provide a technique for more simply measuring alpha and/or beta emissions arising from items or locations. The technique uses indirect monitoring of the emissions by detecting ions generated by the emissions, the ions being attracted electrostatically to electrodes for discharge of collection. The apparatus and method employ a chamber which is sealed around the item or location during monitoring with no air being drawn into or expelled from the chamber during the monitoring process. A simplified structure and operations arises as a result, but without impairing the efficiency and accuracy of the detection technique.

  7. Direct impact aerosol sampling by electrostatic precipitation

    SciTech Connect

    Braden, Jason D.; Harter, Andrew G.; Stinson, Brad J.; Sullivan, Nicholas M.

    2016-02-02

    The present disclosure provides apparatuses for collecting aerosol samples by ionizing an air sample at different degrees. An air flow is generated through a cavity in which at least one corona wire is disposed and electrically charged to form a corona therearound. At least one grounded sample collection plate is provided downstream of the at least one corona wire so that aerosol ions generated within the corona are deposited on the at least one grounded sample collection plate. A plurality of aerosol samples ionized to different degrees can be generated. The at least one corona wire may be perpendicular to the direction of the flow, or may be parallel to the direction of the flow. The apparatus can include a serial connection of a plurality of stages such that each stage is capable of generating at least one aerosol sample, and the air flow passes through the plurality of stages serially.

  8. PREFACE: Electrostatics 2015

    NASA Astrophysics Data System (ADS)

    Matthews, James

    2015-10-01

    Electrostatics 2015, supported by the Institute of Physics, was held in the Sir James Matthews building at Southampton Solent University, UK between 12th and 16th April 2015. Southampton is a historic city on the South Coast of England with a strong military and maritime history. Southampton is home to two Universities: Solent University, which hosted the conference, and the University of Southampton, where much work is undertaken related to electrostatics. 37 oral and 44 poster presentations were accepted for the conference, and 60 papers were submitted and accepted for the proceedings. The Bill Bright Memorial Lecture was delivered this year by Professor Mark Horenstein from Boston University who was, until recently, Editor-in-Chief of the Journal of Electrostatics. He spoke on The contribution of surface potential to diverse problems in electrostatics and his thorough knowledge of the subject of electrostatics was evident in the presentation. The first session was chaired by the Conference Chair, Dr Keith Davies, whose experience in the field showed through his frequent contributions to the discussions throughout the conference. Hazards and Electrostatic Discharge have formed a strong core to Electrostatics conferences for many years, and this conference contained sessions on both Hazards and on ESD, including an invited talk from Dr Jeremy Smallwood on ESD in Industry - Present and Future. Another strong theme to emerge from this year's programme was Non-Thermal Plasmas, which was covered in two sessions. There were two invited talks on this subject: Professor Masaaki Okubo gave a talk on Development of super-clean diesel engine and combustor using nonthermal plasma hybrid after treatment and Dr David Go presented a talk on Atmospheric-pressure ionization processes: New approaches and applications for plasmas in contact with liquids. A new innovation to the conference this year was the opportunity for conference sponsors to present to the delegates a technical

  9. Control of electrostatic damage to electronic circuits

    SciTech Connect

    Kirk, W.J. Jr.

    1980-03-01

    Static is caused by the flow of materials and people within an environment. The static voltages generated by these movements can degrade or destroy many solid state devices currently being used in sophisticated electronic equipment. Discharge of static voltages through these sensitive devices during assembly operations can lead to a nonfunctional assembly fabricated from parts which previously were acceptable or to later failure of an assembly which was functional after fabrication. Sources of electrostatic charges, equipment and methods for minimizing the generation of electrostatic voltages during the production, assembly and packaging of solid state electronic equipment, and the sensitivity of solid state devices to electrostatic damage are discussed. It is concluded that static awareness is the key to an effective electrostatic damage (ESD) control program, and that production facilities must incorporate electrostatic protection facilities, materials, and processes so that workers can concentrate on producing a high-quality product without having to be overly concerned about ESD procedures. (LCL)

  10. Electrostatically screened, voltage-controlled electrostatic chuck

    DOEpatents

    Klebanoff, Leonard Elliott

    2001-01-01

    Employing an electrostatically screened, voltage-controlled electrostatic chuck particularly suited for holding wafers and masks in sub-atmospheric operations will significantly reduce the likelihood of contaminant deposition on the substrates. The electrostatic chuck includes (1) an insulator block having a outer perimeter and a planar surface adapted to support the substrate and comprising at least one electrode (typically a pair of electrodes that are embedded in the insulator block), (2) a source of voltage that is connected to the at least one electrode, (3) a support base to which the insulator block is attached, and (4) a primary electrostatic shield ring member that is positioned around the outer perimeter of the insulator block. The electrostatic chuck permits control of the voltage of the lithographic substrate; in addition, it provides electrostatic shielding of the stray electric fields issuing from the sides of the electrostatic chuck. The shielding effectively prevents electric fields from wrapping around to the upper or front surface of the substrate, thereby eliminating electrostatic particle deposition.

  11. Compact electrostatic comb actuator

    DOEpatents

    Rodgers, M. Steven; Burg, Michael S.; Jensen, Brian D.; Miller, Samuel L.; Barnes, Stephen M.

    2000-01-01

    A compact electrostatic comb actuator is disclosed for microelectromechanical (MEM) applications. The actuator is based upon a plurality of meshed electrostatic combs, some of which are stationary and others of which are moveable. One or more restoring springs are fabricated within an outline of the electrostatic combs (i.e. superposed with the moveable electrostatic combs) to considerably reduce the space required for the actuator. Additionally, a truss structure is provided to support the moveable electrostatic combs and prevent bending or distortion of these combs due to unbalanced electrostatic forces or external loading. The truss structure formed about the moveable electrostatic combs allows the spacing between the interdigitated fingers of the combs to be reduced to about one micron or less, thereby substantially increasing the number of active fingers which can be provided in a given area. Finally, electrostatic shields can be used in the actuator to substantially reduce unwanted electrostatic fields to further improve performance of the device. As a result, the compact electrostatic comb actuator of the present invention occupies only a fraction of the space required for conventional electrostatic comb actuators, while providing a substantial increase in the available drive force (up to one-hundred times).

  12. Electrostatic correlations near charged planar surfaces

    PubMed Central

    Deng, Mingge; Em Karniadakis, George

    2014-01-01

    Electrostatic correlation effects near charged planar surfaces immersed in a symmetric electrolytes solution are systematically studied by numerically solving the nonlinear six-dimensional electrostatic self-consistent equations. We compare our numerical results with widely accepted mean-field (MF) theory results, and find that the MF theory remains quantitatively accurate only in weakly charged regimes, whereas in strongly charged regimes, the MF predictions deviate drastically due to the electrostatic correlation effects. We also observe a first-order like phase-transition corresponding to the counterion condensation phenomenon in strongly charged regimes, and compute the phase diagram numerically within a wide parameter range. Finally, we investigate the interactions between two likely-charged planar surfaces, which repulse each other as MF theory predicts in weakly charged regimes. However, our results show that they attract each other above a certain distance in strongly charged regimes due to significant electrostatic correlations. PMID:25194382

  13. Electrostatic Levitator Electrodes

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Electrostatic levitation system inside Electrostatic Levitator (ESL) vacuum chamber. The ESL uses static electricity to suspend an object (about 2-3 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contacting the container or any instruments, conditions that would alter the readings. The Electrostatic Levitator is one of several tools used in NASA's microgravity materials science program.

  14. ELECTROSTATIC POWER GENERATOR.

    DTIC Science & Technology

    ELECTROSTATIC GENERATORS , POWER EQUIPMENT, ELECTRIC GOVERNORS, CIRCUITS, VACUUM SEALS, ELECTRICAL INSULATION, VACUUM, ELECTRODES, FINISHES, SURFACE...FINISHING, SURFACE PROPERTIES, HARDNESS, PULSE GENERATORS , TRANSFORMERS, FIELD EMISSION.

  15. ELECTROSTATIC POWER GENERATOR.

    DTIC Science & Technology

    ELECTROSTATIC GENERATORS , POWER EQUIPMENT, ELECTRICAL INSULATION, FIELD EMISSION, ELECTRODES, VACUUM, SURFACE PROPERTIES, ANODES, CATHODES, POLISHES...DIELECTRICS, COATINGS, PRESSURE, HARDNESS, PULSE GENERATORS , TRANSFORMERS, VACUUM SEALS, EQUATIONS.

  16. Electrostatic Levitator (ESL)

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Dr. Rulison of Space System LORAl working with the Electrostatic Levitation (ESL) prior to the donation. Space System/LORAL donated the electrostatic containerless processing system to NASA's Marshall Space Flight Center (MSFC). The official hand over took place in July 1998.

  17. Edutainment Science: Electrostatics

    ERIC Educational Resources Information Center

    Ahlers, Carl

    2009-01-01

    Electrostatics should find a special place in all primary school science curricula. It is a great learning area that reinforces the basics that underpin electricity and atomic structure. Furthermore, it has many well documented hands-on activities. Unfortunately, the "traditional" electrostatics equipment such as PVC rods, woollen cloths, rabbit…

  18. Electrostatic Field Invisibility Cloak

    PubMed Central

    Lan, Chuwen; Yang, Yuping; Geng, Zhaoxin; Li, Bo; Zhou, Ji

    2015-01-01

    The invisibility cloak has been drawing much attention due to its new concept for manipulating many physical fields, from oscillating wave fields (electromagnetic, acoustic and elastic) to static magnetic fields, dc electric fields, and diffusive fields. Here, an electrostatic field invisibility cloak has been theoretically investigated and experimentally demonstrated to perfectly hide two dimensional objects without disturbing their external electrostatic fields. The desired cloaking effect has been achieved via both cancelling technology and transformation optics (TO). This study demonstrates a novel way for manipulating electrostatic fields, which shows promise for a wide range of potential applications. PMID:26552343

  19. The electrostatic storage tube

    NASA Technical Reports Server (NTRS)

    Rutherford, R. E., Jr.

    1973-01-01

    An electrostatic camera system is discussed which is based on the electrostatic storage tube. The development of the system was begun following a series of experiments which indicated that the device offers signficantly improved performance over currently available devices. The approach used in developing the high performance camera involves: converting the input image to an electron image at low loss, applying a low noise gain process, and storing the resulting charge pattern in a low-loss target. The basic processes and elements of the electrostatic storage tube are illustrated and discussed. Graphs that depict the camera performance characteristics are included.

  20. Electrostatic particle collection in vacuum

    NASA Astrophysics Data System (ADS)

    Afshar-Mohajer, Nima; Damit, Brian; Wu, Chang-Yu; Sorloaica-Hickman, Nicoleta

    2011-09-01

    Lunar grains accumulate charges due to solar-based ionizing radiations, and the repelling action of like-charged particles causes the levitation of lunar dust. The lunar dust deposit on sensitive and costly surfaces of investigative equipment is a serious concern in lunar explorations. Inspired by electrostatic precipitators (ESPs), the Electrostatic Lunar Dust Collector (ELDC) was proposed for collecting already charged lunar dust particles to prevent the lunar dust threat. As the conditions for terrestrial counterparts are not valid in the lunar environment, equations developed for terrestrial devices yield incorrect predictions in lunar application. Hence, a mathematical model was developed for the ELDC operating in vacuum to determine its collection efficiency. The ratios of electrical energy over potential energy, kinetic energy over potential energy and the ratio of ELDC dimensions were identified to be the key dimensionless parameters. Sensitivity analyses of the relevant parameters showed that depending on ELDC orientation, smaller particles would be collected more easily at vertical orientation, whereas larger particles were easier to collect in a horizontal ELDC configuration. In the worst case scenario, the electrostatic field needed to be 10 times stronger in the vertical mode in order to adequately collect larger particles. The collection efficiency was very sensitive to surface potential of lunar dust and it reached the maximum when surface potential was between 30 and 120 V. Except for regions of the lunar day side with surface potential close to zero, providing 1 kV ( E = 20 kV m -1) with the ELDC was more than enough for collecting all the particles in the most critical orientation. The needed field strength was about 4000 times less than that for repelling 1-μm size particles already settled on the surfaces. The analysis shows that the ELDC offers a viable solution for lunar dust control due to its effectiveness, ease of cleaning and low voltage

  1. Micromachined electrostatic vertical actuator

    DOEpatents

    Lee, Abraham P.; Sommargren, Gary E.; McConaghy, Charles F.; Krulevitch, Peter A.

    1999-10-19

    A micromachined vertical actuator utilizing a levitational force, such as in electrostatic comb drives, provides vertical actuation that is relatively linear in actuation for control, and can be readily combined with parallel plate capacitive position sensing for position control. The micromachined electrostatic vertical actuator provides accurate movement in the sub-micron to micron ranges which is desirable in the phase modulation instrument, such as optical phase shifting. For example, compact, inexpensive, and position controllable micromirrors utilizing an electrostatic vertical actuator can replace the large, expensive, and difficult-to-maintain piezoelectric actuators. A thirty pound piezoelectric actuator with corner cube reflectors, as utilized in a phase shifting diffraction interferometer can be replaced with a micromirror and a lens. For any very precise and small amplitudes of motion` micromachined electrostatic actuation may be used because it is the most compact in size, with low power consumption and has more straightforward sensing and control options.

  2. More Electrostatic Explorations.

    ERIC Educational Resources Information Center

    Stewart, Gay; Gallai, Ditta

    1998-01-01

    Presents worksheet activities that enable students to explore the concept of electrostatic induction and learn the meaning of grounding. Students build two classic devices, the electrophorus and the leaf electroscope. (DDR)

  3. Graphene Electrostatic Microphone

    NASA Astrophysics Data System (ADS)

    Zhou, Qin; Onishi, Seita; Zettl, A.

    2015-03-01

    We demonstrate a wideband electrostatic graphene microphone displaying flat frequency response over the entire human audible region as well as into the ultrasonic regime. Using the microphone, low-level ultrasonic bat calls are successfully recorded. The microphone can be paired with a similarly constructed electrostatic graphene loudspeaker to create a wideband ultrasonic radio. Materials Sciences Division, Lawrence Berkeley National Laboratory Kavli Energy NanoSciences Institute at the University of California - Berkeley.

  4. Electrostatic discharge test apparatus

    NASA Technical Reports Server (NTRS)

    Smith, William Conrad (Inventor)

    1988-01-01

    Electrostatic discharge properties of materials are quantitatively measured and ranked. Samples are rotated on a turntable beneath selectable, co-available electrostatic chargers, one being a corona charging element and the other a sample-engaging triboelectric charging element. Samples then pass under a voltage meter to measure the amount of residual charge on the samples. After charging is discontinued, measurements are continued to record the charge decay history over time.

  5. Electrostatic Levitator in Use

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Metal droplet levitated inside the Electrostatic Levitator (ESL). The ESL uses static electricity to suspend an object (about 2-3 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contacting the container or any instruments, conditions that would alter the readings. The Electrostatic Levitator is one of several tools used in NASA's microgravity materials science program.

  6. Electrostatic Levitator Electrode Layout

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Schematic of Electrostatic Levitator (ESL) electrodes and controls system. The ESL uses static electricity to suspend an object (about 2-3 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contacting the container or any instruments, conditions that would alter the readings. The Electrostatic Levitator is one of several tools used in NASA's microgravity materials science program.

  7. Electrostatic Levitator Layout

    NASA Technical Reports Server (NTRS)

    1998-01-01

    General oayout of Electrostatic Levitator (ESL). The ESL uses static electricity to suspend an object (about 2-3 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contacting the container or any instruments, conditions that would alter the readings. The Electrostatic Levitator is one of several tools used in NASA's microgravity materials science program.

  8. Electrostatics at the nanoscale.

    PubMed

    Walker, David A; Kowalczyk, Bartlomiej; de la Cruz, Monica Olvera; Grzybowski, Bartosz A

    2011-04-01

    Electrostatic forces are amongst the most versatile interactions to mediate the assembly of nanostructured materials. Depending on experimental conditions, these forces can be long- or short-ranged, can be either attractive or repulsive, and their directionality can be controlled by the shapes of the charged nano-objects. This Review is intended to serve as a primer for experimentalists curious about the fundamentals of nanoscale electrostatics and for theorists wishing to learn about recent experimental advances in the field. Accordingly, the first portion introduces the theoretical models of electrostatic double layers and derives electrostatic interaction potentials applicable to particles of different sizes and/or shapes and under different experimental conditions. This discussion is followed by the review of the key experimental systems in which electrostatic interactions are operative. Examples include electroactive and "switchable" nanoparticles, mixtures of charged nanoparticles, nanoparticle chains, sheets, coatings, crystals, and crystals-within-crystals. Applications of these and other structures in chemical sensing and amplification are also illustrated.

  9. Large electrostatic accelerators

    SciTech Connect

    Jones, C.M.

    1984-01-01

    The increasing importance of energetic heavy ion beams in the study of atomic physics, nuclear physics, and materials science has partially or wholly motivated the construction of a new generation of large electrostatic accelerators designed to operate at terminal potentials of 20 MV or above. In this paper, the author briefly discusses the status of these new accelerators and also discusses several recent technological advances which may be expected to further improve their performance. The paper is divided into four parts: (1) a discussion of the motivation for the construction of large electrostatic accelerators, (2) a description and discussion of several large electrostatic accelerators which have been recently completed or are under construction, (3) a description of several recent innovations which may be expected to improve the performance of large electrostatic accelerators in the future, and (4) a description of an innovative new large electrostatic accelerator whose construction is scheduled to begin next year. Due to time and space constraints, discussion is restricted to consideration of only tandem accelerators.

  10. 40 CFR 60.4855 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, or activated carbon... precipitator, or activated carbon injection, or if I limit emissions in some other manner, to comply with the..., electrostatic precipitator, or activated carbon injection, or limit emissions in some other manner...

  11. 40 CFR 60.4855 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, or activated carbon... precipitator, or activated carbon injection, or if I limit emissions in some other manner, to comply with the..., electrostatic precipitator, or activated carbon injection, or limit emissions in some other manner...

  12. 40 CFR 60.4855 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, or activated carbon... precipitator, or activated carbon injection, or if I limit emissions in some other manner, to comply with the..., electrostatic precipitator, or activated carbon injection, or limit emissions in some other manner...

  13. 40 CFR 60.4855 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, or activated carbon... precipitator, or activated carbon injection, or if I limit emissions in some other manner, to comply with the..., electrostatic precipitator, or activated carbon injection, or limit emissions in some other manner...

  14. Electrostatic graphene loudspeaker

    NASA Astrophysics Data System (ADS)

    Zhou, Qin; Zettl, A.

    2013-06-01

    Graphene has extremely low mass density and high mechanical strength, and key qualities for efficient wide-frequency-response electrostatic audio speaker design. Low mass ensures good high frequency response, while high strength allows for relatively large free-standing diaphragms necessary for effective low frequency response. Here, we report on construction and testing of a miniaturized graphene-based electrostatic audio transducer. The speaker/earphone is straightforward in design and operation and has excellent frequency response across the entire audio frequency range (20 Hz-20 kHz), with performance matching or surpassing commercially available audio earphones.

  15. Electrostatic Levitator Vacuum Chamber

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Optical ports ring the Electrostatic Levitator (ESL) vacuum chamber to admit light from the heating laser (beam passes through the window at left), positioning lasers (one port is at center), and lamps to allow diagnostic instruments to view the sample. The ESL uses static electricity to suspend an object (about 2-3 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contacting the container or any instruments, conditions that would alter the readings. The Electrostatic Levitator is one of several tools used in NASA's microgravity materials science program.

  16. Electrostatic Levitator Inspected

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Larry Savage, Dr. Jan Rogers, Dr. Michael Robinson (All NASA) and Doug Huie (Mevatec) inspect the Electrostatic Levitator (ESL) at NASA's Marshall Space Flight Center (MSFC). The ESL uses static electricity to suspend an object (about 2-3 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contacting the container or any instruments, conditions that would alter the readings. The Electrostatic Levitator is one of several tools used in NASA's microgravity materials science program.

  17. Electrostatic Levitator (ESL) Undercooling

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Graph depicting Electrostatic Levitator (ESL) heating and cooling cycle to achieve undercooling of liquid metals. The ESL uses static electricity to suspend an object (about 3-4 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contracting the container or any instruments, conditions that would alter the readings. The electrostatic Levitator is one of several tools used in NASA's microgravity matierials sciences program.

  18. Electrostatic Levitator at Work

    NASA Technical Reports Server (NTRS)

    2000-01-01

    A 3 mm drop of nickel-zirconium, heated to incandescence, hovers between electrically charged plates inside the Electrostatic Levitator (ESL). The ESL uses static electricity to suspend an object (about 2-3 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contacting the container or any instruments, conditions that would alter the readings. The Electrostatic Levitator is one of several tools used in NASA's microgravity materials science program.

  19. Nanoscale Electrostatics in Mitosis

    NASA Astrophysics Data System (ADS)

    Gagliardi, L. John; West, Patrick Michael

    2001-04-01

    Primitive biological cells had to divide with very little biology. This work simulates a physicochemical mechanism, based upon nanoscale electrostatics, which explains the anaphase A poleward motion of chromosomes. In the cytoplasmic medium that exists in biological cells, electrostatic fields are subject to strong attenuation by Debye screening, and therefore decrease rapidly over a distance equal to several Debye lengths. However, the existence of microtubules within cells changes the situation completely. Microtubule dimer subunits are electric dipolar structures, and can act as intermediaries that extend the reach of the electrostatic interaction over cellular distances. Experimental studies have shown that intracellular pH rises to a peak at mitosis, and decreases through cytokinesis. This result, in conjunction with the electric dipole nature of microtubule subunits and the Debye screened electrostatic force is sufficient to explain and unify the basic events during mitosis and cytokinesis: (1) assembly of asters, (2) motion of the asters to poles, (3) poleward motion of chromosomes (anaphase A), (4) cell elongation, and (5) cytokinesis. This paper will focus on a simulation of the dynamics if anaphase A motion based on this comprehensive model. The physicochemical mechanisms utilized by primitive cells could provide important clues regarding our understanding of cell division in modern eukaryotic cells.

  20. Magnetosheath electrostatic turbulence

    NASA Technical Reports Server (NTRS)

    Rodriquez, P.

    1977-01-01

    The spectrum of electrostatic plasma waves in the terrestrial magnetosheath was studied using the plasma wave experiment on the IMP-6 satellite. Electrostatic plasma wave turbulence is almost continuously present throughout the magnetosheath with broadband (20 Hz- 70 kHz) r.m.s. field intensities typically 0.01 - 1.0 millivolts/m. Peak intensities of about 1.0 millivolts/m near the electron plasma frequency (30 - 60 kHz) were detected occasionally. The components usually identified in the spectrum of magnetosheath electrostatic turbulence include a high frequency ( or = 30 kHz) component peaking at the electron plasma frequency f sub pe, a low frequency component with a broad intensity maximum below the nominal ion plasma frequency f sub pi (approximately f sub pe/43), and a less well defined intermediate component in the range f sub pi f f sub pe. The intensity distribution of magnetosheath electrostatic turbulence clearly shows that the low frequency component is associated with the bow shock, suggesting that the ion heating begun at the shock continues into the downstream magnetosheath.

  1. Electrostatics of Rigid Polyelectrolytes

    SciTech Connect

    Wong, G.C.L.

    2009-06-04

    The organization of rigid biological polyelectrolytes by multivalent ions and macroions are important for many fundamental problems in biology and biomedicine, such as cytoskeletal regulation and antimicrobial sequestration in cystic fibrosis. These polyelectrolytes have been used as model systems for understanding electrostatics in complex fluids. Here, we review some recent results in theory, simulations, and experiments.

  2. The Contribution of Surface Potential to Diverse Problems in Electrostatics

    NASA Astrophysics Data System (ADS)

    Horenstein, M.

    2015-10-01

    Electrostatics spans many different subject areas. Some comprise “good electrostatics,” where charge is used for desirable purposes. Such areas include industrial manufacturing, electrophotography, surface modification, precipitators, aerosol control, and MEMS. Other areas comprise “bad electrostatics,” where charge is undesirable. Such areas include hazardous discharges, ESD, health effects, nuisance triboelectrification, particle contamination, and lightning. Conference proceedings such as this one inevitably include papers grouped around these topics. One common thread throughout is the surface potential developed when charge resides on an insulator surface. Often, the charged insulator will be in intimate contact with a ground plane. At other times, the charged insulator will be isolated. In either case, the resulting surface potential is important to such processes as propagating brush discharges, charge along a moving web, electrostatic biasing effects in MEMS, non-contacting voltmeters, field-effect transistor sensors, and the maximum possible charge on a woven fabric.

  3. Biobriefcase electrostatic aerosol collector

    DOEpatents

    Bell, Perry M.; Christian, Allen T.; Bailey, Christopher G.; Willis, Ladona; Masquelier, Donald A.; Nasarabadi, Shanavaz L.

    2009-03-17

    A system for sampling air and collecting particles entrained in the air comprising a receiving surface, a liquid input that directs liquid to the receiving surface and produces a liquid surface, an air input that directs the air so that the air with particles entrained in the air impact the liquid surface, and an electrostatic contact connected to the liquid that imparts an electric charge to the liquid. The particles potentially including bioagents become captured in the liquid by the air with particles entrained in the air impacting the liquid surface. Collection efficiency is improved by the electrostatic contact electrically charging the liquid. The effects of impaction and adhesion due to electrically charging the liquid allows a unique combination in a particle capture medium that has a low fluid consumption rate while maintaining high efficiency.

  4. Automated Electrostatics Environmental Chamber

    NASA Technical Reports Server (NTRS)

    Calle, Carlos; Lewis, Dean C.; Buchanan, Randy K.; Buchanan, Aubri

    2005-01-01

    The Mars Electrostatics Chamber (MEC) is an environmental chamber designed primarily to create atmospheric conditions like those at the surface of Mars to support experiments on electrostatic effects in the Martian environment. The chamber is equipped with a vacuum system, a cryogenic cooling system, an atmospheric-gas replenishing and analysis system, and a computerized control system that can be programmed by the user and that provides both automation and options for manual control. The control system can be set to maintain steady Mars-like conditions or to impose temperature and pressure variations of a Mars diurnal cycle at any given season and latitude. In addition, the MEC can be used in other areas of research because it can create steady or varying atmospheric conditions anywhere within the wide temperature, pressure, and composition ranges between the extremes of Mars-like and Earth-like conditions.

  5. Electrostatically clean solar array

    NASA Technical Reports Server (NTRS)

    Stern, Theodore Garry (Inventor); Krumweide, Duane Eric (Inventor)

    2004-01-01

    Provided are methods of manufacturing an electrostatically clean solar array panel and the products resulting from the practice of these methods. The preferred method uses an array of solar cells, each with a coverglass where the method includes machining apertures into a flat, electrically conductive sheet so that each aperture is aligned with and undersized with respect to its matched coverglass sheet and thereby fashion a front side shield with apertures (FSA). The undersized portion about each aperture of the bottom side of the FSA shield is bonded to the topside portions nearest the edges of each aperture's matched coverglass. Edge clips are attached to the front side aperture shield edges with the edge clips electrically and mechanically connecting the tops of the coverglasses to the solar panel substrate. The FSA shield, edge clips and substrate edges are bonded so as to produce a conductively grounded electrostatically clean solar array panel.

  6. Electrostatic Levitator Operations

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Dr. Jan Rogers (left) and Larry Savage (foreground) of the Science Directorate at NASA's Marshall Space Flight Center are joined by Dr. Richard Weber (Center) and April Hixon of Containerless Research Inc. of Evanston, Ill., in conducting an experiment run of the Electrostatic Levitator (ESL) using insulating materials. Materials researchers use unique capability of the facility to levitate and study the properties of various materials important in manufacturing processes.

  7. Micromachined silicon electrostatic chuck

    SciTech Connect

    Anderson, R.A.; Seager, C.H.

    1994-12-31

    In the field of microelectronics, and in particular the fabrication of microelectronics during plasma etching processes, electrostatic chucks have been used to hold silicon wafers during the plasma etching process. Current electrostatic chucks that operate by the {open_quotes}Johnson-Rahbek Effect{close_quotes} consist of a metallic base plate that is typically coated with a thick layer of slightly conductive dielectric material. A silicon wafer of approximately the same size as the chuck is placed on top of the chuck and a potential difference of several hundred volts is applied between the silicon and the base plate of the electrostatic chuck. This causes an electrostatic attraction proportional to the square of the electric field in the gap between the silicon wafer and the chuck face. When the chuck is used in a plasma filled chamber the electric potential of the wafer tends to be fixed by the effective potential of the plasma. The purpose of the dielectric layer on the chuck is to prevent the silicon wafer from coming into direct electrical contact with the metallic part of the chuck and shorting out the potential difference. On the other hand, a small amount of conductivity appears to be desirable in the dielectric coating so that much of its free surface between points of contact with the silicon wafer is maintained near the potential of the metallic base plate; otherwise, a much larger potential difference would be needed to produce a sufficiently large electric field in the vacuum gap between the wafer and chuck. Typically, the face of the chuck has a pattern of grooves in which about 10 torr pressure of helium gas is maintained. This gas provides cooling (thermal contact) between the wafer and the chuck. A pressure of 10 torr is equivalent to about 0.2 psi.

  8. Electrostatic antenna space environment interaction study

    NASA Technical Reports Server (NTRS)

    Katz, I.

    1981-01-01

    The interactions of the electrostatic antenna with the space environment in both low Earth orbit and geosynchronous orbit are investigated. It is concluded that the electrostatically controlled membrane mirror is a viable concept for space applications. However, great care must be taken to enclose the high voltage electrodes in a Faraday cage structure to separate the high voltage region from the ambient plasma. For this reason, metallized cloth is not acceptable as a membrane material. Conventional spacecraft charging at geosynchronous orbit should not be a problem provided ancillary structures (such as booms) are given nonnegligible conductivity and adequate grounding. Power loss due to plasma electrons entering the high field region is a potentially serious problem. In low earth orbit any opening whatever in the Faraday cage is likely to produce an unacceptable power drain.

  9. Electrostatics of Granular Materials

    NASA Technical Reports Server (NTRS)

    Marshall, John

    2004-01-01

    The purpose of the research was to continue developing an understanding of electrostatic phenomena in preparation for any future flight opportunities of the EGM experiment, originally slated for a 2004 Space Station deployment. Work would be based on theoretical assessments, ground-based lab experiments, and reduced-gravity experiments. The ability to examine dipoles in the lab proved to be elusive, and thus, effort was concentrated on monopoles -how materials become charged, the fate of the charge, the role of material type, and so forth. Several significant milestones were achieved in this regard. In regard of the dipoles, experiments were designed in collaboration with the University of Chicago school district who had access to reduced gravity on the KC-135 aircraft. Two experiments were slated to fly last year but were cancelled after the Columbia accident. One of the experiments has been given a second life and will fly sometime in 2005 if the Shuttle flights resume. There remains active interest in the question of electrostatic dipoles within the educational community, and experiments using magnetic dipoles as a substitute are to be examined. The KC-135 experiments will also examine dispersion methods for particles as a verification of possible future techniques in microgravity. Both laboratory and theoretical work established a number of breakthroughs in our understanding of electrostatic phenomena. These breakthroughs are listed in this paper.

  10. Electrostatic Plasma Accelerator (EPA)

    NASA Technical Reports Server (NTRS)

    Brophy, John R.; Aston, Graeme

    1989-01-01

    The Electrostatic Plasma Accelerator (EPA) is a thruster concept which promises specific impulse levels between low power arcjets and those of the ion engine while retaining the relative simplicity of the arcjet. The EPA thruster produces thrust through the electrostatic acceleration of a moderately dense plasma. No accelerating electrodes are used and the specific impulse is a direct function of the applied discharge voltage and the propellant atomic mass. The goal of the present program is to demonstrate feasibility of the EPA thruster concept through experimental and theoretical investigations of the EPA acceleration mechanism and discharge chamber performance. Experimental investigations will include operating the test bed ion (TBI) engine as an EPA thruster and parametrically varying the thruster geometry and operating conditions to quantify the electrostatic plasma acceleration effect. The theoretical investigations will include the development of a discharge chamber model which describes the relationships between the engine size, plasma properties, and overall performance. For the EPA thruster to be a viable propulsion concept, overall thruster efficiencies approaching 30% with specific impulses approaching 1000 s must be achieved.

  11. Electrostatic space radiation shielding

    NASA Astrophysics Data System (ADS)

    Tripathi, Ram K.; Wilson, John W.; Youngquist, Robert C.

    2008-09-01

    For the success of NASA’s new vision for space exploration to Moon, Mars and beyond, exposures from the hazards of severe space radiation in deep space long duration missions is ‘a must solve’ problem. The payload penalty demands a very stringent requirement on the design of the spacecrafts for human deep space missions. The exploration beyond low Earth orbit (LEO) to enable routine access of space will require protection from the hazards of the accumulated exposures of space radiation, Galactic Cosmic Rays (GCR) and Solar Particle Events (SPE), and minimizing the production of secondary radiation is a great advantage. There is a need to look to new horizons for newer technologies. The present investigation revisits electrostatic active radiation shielding and explores the feasibility of using the electrostatic shielding in concert with the state-of-the-art materials shielding and protection technologies. The full space radiation environment has been used, for the first time, to explore the feasibility of electrostatic shielding. The goal is to repel enough positive charge ions so that they miss the spacecraft without attracting thermal electrons. Conclusions are drawn for the future directions of space radiation protection.

  12. Innovative Electrostatic Adhesion Technologies

    NASA Technical Reports Server (NTRS)

    Bryan, Tom; Macleod, Todd; Gagliano, Larry; Williams, Scott; McCoy, Brian

    2015-01-01

    Developing specialized Electro-Static grippers (commercially used in Semiconductor Manufacturing and in package handling) will allow gentle and secure Capture, Soft Docking, and Handling of a wide variety of materials and shapes (such as upper-stages, satellites, arrays, and possibly asteroids) without requiring physical features or cavities for a pincher or probe or using harpoons or nets. Combined with new rigid boom mechanisms or small agile chaser vehicles, flexible, high speed Electro-Static Grippers can enable compliant capture of spinning objects starting from a safe stand-off distance. Electroadhesion (EA) can enable lightweight, ultra-low-power, compliant attachment in space by using an electrostatic force to adhere similar and dissimilar surfaces. A typical EA enabled device is composed of compliant space-rated materials, such as copper-clad polyimide encapsulated by polymers. Attachment is induced by strong electrostatic forces between any substrate material, such as an exterior satellite panel and a compliant EA gripper pad surface. When alternate positive and negative charges are induced in adjacent planar electrodes in an EA surface, the electric fields set up opposite charges on the substrate and cause an electrostatic adhesion between the electrodes and the induced charges on the substrate. Since the electrodes and the polymer are compliant and can conform to uneven or rough surfaces, the electrodes can remain intimately close to the entire surface, enabling high clamping pressures. Clamping pressures of more than 3 N/cm2 in shear can be achieved on a variety of substrates with ultra-low holding power consumption (measured values are less than 20 microW/Newton weight held). A single EA surface geometry can be used to clamp both dielectric and conductive substrates, with slightly different physical mechanisms. Furthermore EA clamping requires no normal force be placed on the substrate, as conventional docking requires. Internally funded research and

  13. Innovative Electrostatic Adhesion Technologies

    NASA Astrophysics Data System (ADS)

    Gagliano, L.; Bryan, T.; Williams, S.; McCoy, B.; MacLeod, T.

    Developing specialized Electro-Static grippers (commercially used in Semiconductor Manufacturing and in package handling) will allow gentle and secure Capture, Soft Docking, and Handling of a wide variety of materials and shapes (such as upper-stages, satellites, arrays, and possibly asteroids) without requiring physical features or cavities for a pincher or probe or using harpoons or nets. Combined with new rigid boom mechanisms or small agile chaser vehicles, flexible, high speed Electro-Static Grippers can enable compliant capture of spinning objects starting from a safe stand-off distance. Electroadhesion (EA) can enable lightweight, ultra-low-power, compliant attachment in space by using an electrostatic force to adhere similar and dissimilar surfaces. A typical EA enabled device is composed of compliant space-rated materials, such as copper-clad polyimide encapsulated by polymers. Attachment is induced by strong electrostatic forces between any substrate material, such as an exterior satellite panel and a compliant EA surface. When alternate positive and negative charges are induced in adjacent planar electrodes in an EA surface, the electric fields set up opposite charges on the substrate and cause an electrostatic adhesion between the electrodes and the induced charges on the substrate. Since the electrodes and the polymer are compliant and can conform to uneven or rough surfaces, the electrodes can remain intimately close to the entire surface, enabling high clamping pressures. Clamping pressures of more than 3 N/cm2 in shear can be achieved on a variety of substrates with ultra-low holding power consumption (measured values are less than 20 microW/Newton weight held). A single EA surface geometry can be used to clamp both dielectric and conductive substrates, with slightly different physical mechanisms. Furthermore EA clamping requires no normal force be placed on the substrate, as conventional docking requires. Internally funded research and development

  14. Spacecraft Electrostatic Radiation Shielding

    NASA Technical Reports Server (NTRS)

    2008-01-01

    This project analyzed the feasibility of placing an electrostatic field around a spacecraft to provide a shield against radiation. The concept was originally proposed in the 1960s and tested on a spacecraft by the Soviet Union in the 1970s. Such tests and analyses showed that this concept is not only feasible but operational. The problem though is that most of this work was aimed at protection from 10- to 100-MeV radiation. We now appreciate that the real problem is 1- to 2-GeV radiation. So, the question is one of scaling, in both energy and size. Can electrostatic shielding be made to work at these high energy levels and can it protect an entire vehicle? After significant analysis and consideration, an electrostatic shield configuration was proposed. The selected architecture was a torus, charged to a high negative voltage, surrounding the vehicle, and a set of positively charged spheres. Van de Graaff generators were proposed as the mechanism to move charge from the vehicle to the torus to generate the fields necessary to protect the spacecraft. This design minimized complexity, residual charge, and structural forces and resolved several concerns raised during the internal critical review. But, it still is not clear if such a system is costeffective or feasible, even though several studies have indicated usefulness for radiation protection at energies lower than that of the galactic cosmic rays. Constructing such a system will require power supplies that can generate voltages 10 times that of the state of the art. Of more concern is the difficulty of maintaining the proper net charge on the entire structure and ensuring that its interaction with solar wind will not cause rapid discharge. Yet, if these concerns can be resolved, such a scheme may provide significant radiation shielding to future vehicles, without the excessive weight or complexity of other active shielding techniques.

  15. ELECTROSTATICALLY ENHANCED BARRIER FILTER COLLECTION

    SciTech Connect

    John Erjavec; Michael D. Mann; Ryan Z. Knutson; Michael L. Swanson; Michael E. Collings

    2003-06-01

    barrier filter collection (EBFC). This concept combines electrostatic precipitation (ESP) with candle filters in a single unit. Similar technology has been recently proven on a commercial scale for atmospheric applications, but needed to be tested at high temperatures and pressures. The synergy obtained by combining the two control technologies into a single system should actually reduce filter system capital and operating costs and make the system more reliable. More specifically, the ESP is expected to significantly reduce candle filter load and also to limit ash reintrainment, allowing for full recovery of baseline pressure drop during backpulsing of the filters.

  16. ESPVI 4.0 ELECTROSTATIS PRECIPITATOR V-1 AND PERFORMANCE MODEL: USER'S MANUAL

    EPA Science Inventory

    The manual is the companion document for the microcomputer program ESPVI 4.0, Electrostatic Precipitation VI and Performance Model. The program was developed to provide a user- friendly interface to an advanced model of electrostatic precipitation (ESP) performance. The program i...

  17. Electrostatic Return of Contaminants

    NASA Technical Reports Server (NTRS)

    Rantanen, R.; Gordon, T.

    2003-01-01

    A Model has been developed capable of calculating the electrostatic return of spacecraft-emitted molecules that are ionized and attracted back to the spacecraft by the spacecraft electric potential on its surfaces. The return of ionized contaminant molecules to charged spacecraft surfaces is very important to all altitudes. It is especially important at geosynchronous and interplanetary environments, since it may be the only mechanism by which contaminants can degrade a surface. This model is applicable to all altitudes and spacecraft geometries. In addition to results of the model will be completed to cover a wide range of potential space systems.

  18. Micromachined, Electrostatically Deformable Reflectors

    NASA Technical Reports Server (NTRS)

    Bartman, Randall K.; Wang, Paul K. C.; Miller, Linda M.; Kenny, Thomas W.; Kaiser, William J.; Hadaegh, Fred Y.; Agronin, Michael L.

    1995-01-01

    Micromachined, closed-loop, electrostatically actuated reflectors (microCLEARs) provide relatively simple and inexpensive alternatives to large, complex, expensive adaptive optics used to control wavefronts of beams of light in astronomy and in experimental laser weapons. Micromachining used to make deformable mirror, supporting structure, and actuation circuitry. Development of microCLEARs may not only overcome some of disadvantages and limitations of older adaptive optics but may also satisfy demands of potential market for small, inexpensive deformable mirrors in electronically controlled film cameras, video cameras, and other commercial optoelectronic instruments.

  19. Electrostatically Driven Nanoballoon Actuator.

    PubMed

    Barzegar, Hamid Reza; Yan, Aiming; Coh, Sinisa; Gracia-Espino, Eduardo; Dunn, Gabriel; Wågberg, Thomas; Louie, Steven G; Cohen, Marvin L; Zettl, Alex

    2016-11-09

    We demonstrate an inflatable nanoballoon actuator based on geometrical transitions between the inflated (cylindrical) and collapsed (flattened) forms of a carbon nanotube. In situ transmission electron microscopy experiments employing a nanoelectromechanical manipulator show that a collapsed carbon nanotube can be reinflated by electrically charging the nanotube, thus realizing an electrostatically driven nanoballoon actuator. We find that the tube actuator can be reliably cycled with only modest control voltages (few volts) with no apparent wear or fatigue. A complementary theoretical analysis identifies critical parameters for nanotube nanoballoon actuation.

  20. Filter and electrostatic samplers for semivolatile aerosols: physical artifacts.

    PubMed

    Volckens, John; Leith, David

    2002-11-01

    Adsorptive and evaporative artifacts often bias measurements of semivolatile aerosols. Adsorption occurs when the sampling method disrupts the gas-particle partitioning equilibrium. Evaporation occurs because concentrations of semivolatiles are rarely constant over time. Filtration is subject to both adsorptive and evaporative artifacts. By comparison, electrostatic precipitation reduces these artifacts by minimizing the surface area of collected particles without substantially disrupting the gas-particle equilibrium. The extent of these artifacts was determined for filter samplers and electrostatic precipitator samplers for semivolatile alkane aerosols in the laboratory. Adsorption of gas-phase semivolatiles was lower in electrostatic precipitators by factors of 5-100 compared to the filter method. Particle evaporation from the electrostatic sampler was 2.3 times lower than that from TFE-coated glass-fiber filters. Use of a backup filter to correct for compound-specific adsorption artifacts can introduce positive or negative errors to the measured particle-phase concentration due to competition among the adsorbates for available adsorption sites. Adsorption of evaporated particles from the front filter onto the backup filter increased the measured evaporative artifact by a factor of 1.5-2.

  1. Undamped electrostatic plasma waves

    SciTech Connect

    Valentini, F.; Perrone, D.; Veltri, P.; Califano, F.; Pegoraro, F.; Morrison, P. J.; O'Neil, T. M.

    2012-09-15

    Electrostatic waves in a collision-free unmagnetized plasma of electrons with fixed ions are investigated for electron equilibrium velocity distribution functions that deviate slightly from Maxwellian. Of interest are undamped waves that are the small amplitude limit of nonlinear excitations, such as electron acoustic waves (EAWs). A deviation consisting of a small plateau, a region with zero velocity derivative over a width that is a very small fraction of the electron thermal speed, is shown to give rise to new undamped modes, which here are named corner modes. The presence of the plateau turns off Landau damping and allows oscillations with phase speeds within the plateau. These undamped waves are obtained in a wide region of the (k,{omega}{sub R}) plane ({omega}{sub R} being the real part of the wave frequency and k the wavenumber), away from the well-known 'thumb curve' for Langmuir waves and EAWs based on the Maxwellian. Results of nonlinear Vlasov-Poisson simulations that corroborate the existence of these modes are described. It is also shown that deviations caused by fattening the tail of the distribution shift roots off of the thumb curve toward lower k-values and chopping the tail shifts them toward higher k-values. In addition, a rule of thumb is obtained for assessing how the existence of a plateau shifts roots off of the thumb curve. Suggestions are made for interpreting experimental observations of electrostatic waves, such as recent ones in nonneutral plasmas.

  2. Electrostatic Plasma Accelerator (EPA)

    NASA Technical Reports Server (NTRS)

    Brophy, John R.; Aston, Graeme

    1995-01-01

    The application of electric propulsion to communications satellites, however, has been limited to the use of hydrazine thrusters with electric heaters for thrust and specific impulse augmentation. These electrothermal thrusters operate at specific impulse levels of approximately 300 s with heater powers of about 500 W. Low power arcjets (1-3 kW) are currently being investigated as a way to increase specific impulse levels to approximately 500 s. Ion propulsion systems can easily produce specific impulses of 3000 s or greater, but have yet to be applied to communications satellites. The reasons most often given for not using ion propulsion systems are their high level of overall complexity, low thrust with long burn times, and the difficulty of integrating the propulsion system into existing commercial spacecraft busses. The Electrostatic Plasma Accelerator (EPA) is a thruster concept which promises specific impulse levels between low power arcjets and those of the ion engine while retaining the relative simplicity of the arcjet. The EPA thruster produces thrust through the electrostatic acceleration of a moderately dense plasma. No accelerating electrodes are used and the specific impulse is a direct function of the applied discharge voltage and the propellant atomic mass.

  3. Electrostatic Beneficiation of Coal

    SciTech Connect

    D. Lindquist; K. B. Tennal; M. K. Mazumder

    1998-10-29

    It was suggested in the proposal that small particles, due to low inertia, may not impact on the surfaces of the tribocharger. They would, thus, not receive charge and would not be beneficiated in the electrostatic separation. A milling process was proposed in which the small particles are stirred together with larger carrier beads producing the desired contact charge exchange. A force is necessary for removing the coal particles from the carrier beads. In copying machines electrostatic force is used to pull toner particles away horn iron carrier particles which are held back by magnetic force. Aerodynamic force is used in test instruments for measuring the charge to mass ratio on toners. A similar system of milling and removal is desired for use with the small coal particles. The carrier beads need to be made of copper rather than iron. This complicates the separation process since copper is non-magnetic. We are working on coating of iron beads with a layer of copper. Dr. Robert Engleken of Arkansas State University has supplied us with several test batches of copper-coated iron in the size range of -40 +70 mesh. ` We are currently testing whether the milling process used with the copper coated iron beads produces the desired charge on the coal particles.

  4. Flue gas conditioning for improved particle collection in electrostatic precipitators

    SciTech Connect

    Durham, M.D.

    1992-04-27

    The purpose of this research program is to identify and evaluate a variety of additives capable of increasing particle cohesion which could be used for improving collection efficiency in an ESP. A three-phase screening process will be used to provide the, evaluation of many additives in a logical and cost-effective manner. The three step approach involves the following experimental setups: 1. Provide a preliminary screening in the laboratory by measuring the effects of various conditioning agents on reentrainment of flyash particles in an electric field operating at simulated flue gas conditions. 2. Evaluate the successful additives using a 100 acfm bench-scale ESP operating on actual flue gas. 3. Obtain the data required for scaling up the technology by testing the two or three most promising conditioning agents at the pilot scale.

  5. Commissioning of an electrostatic precipitator burning refinary residue

    SciTech Connect

    Mayer-Schwinning, G.; Varga, A.

    1996-12-31

    The Dunamenti Power Plant is the largest Heavy Fuel Oil (HFO) fired power plant in Hungary with an annual oil consumption of approximately 1 x 10{sup 6} m.t./a. The sulfur content of this oil is rather high (S = 2 - 3 %) and it also contains heavy metals in a significant amount. These pollutants in the flue gas impair the air quality in the town of Szazhalombatta, situated next to the refinery. The number of children suffering from respiratory disorders in this town is higher than the national average. The power plant management has decided to build an ESP for its 6 x 215 MW units, partly as a result of pressure exerted by the local authority and partly because of the new Environment Act under preparation that takes account of the European emission standards. The ESP contract was awarded to LURGI GmbH, primarily because LURGI had a reference site firing HFO with very high sulfur content. The contract was signed in March 1994 and commissioning was already started in December 1994. This paper describes the ESP installed at the Dunamenti Power Plant and the experiences gained with dosing ammonium and other additives. It will also discuss the utilization of the dust.

  6. TECHNICAL NOTE: PERFORMANCE OF A PERSONAL ELECTROSTATIC PRECIPITATOR PARTICLE SAMPLER

    EPA Science Inventory

    Filter-based methods used to measure aerosols with semi-volatile constituents are subject to biases from adsorption and volatilization that may occur during sampling (McDow et al., 1990, Turpin et al., 1994, Volckens et al., 1999; Tolocka et al. 2001). The development and eval...

  7. Precipitation Recycling

    NASA Technical Reports Server (NTRS)

    Eltahir, Elfatih A. B.; Bras, Rafael L.

    1996-01-01

    The water cycle regulates and reflects natural variability in climate at the regional and global scales. Large-scale human activities that involve changes in land cover, such as tropical deforestation, are likely to modify climate through changes in the water cycle. In order to understand, and hopefully be able to predict, the extent of these potential global and regional changes, we need first to understand how the water cycle works. In the past, most of the research in hydrology focused on the land branch of the water cycle, with little attention given to the atmospheric branch. The study of precipitation recycling which is defined as the contribution of local evaporation to local precipitation, aims at understanding hydrologic processes in the atmospheric branch of the water cycle. Simply stated, any study on precipitation recycling is about how the atmospheric branch of the water cycle works, namely, what happens to water vapor molecules after they evaporate from the surface, and where will they precipitate?

  8. ELECTROSTATIC MEMORY SYSTEM

    DOEpatents

    Chu, J.C.

    1958-09-23

    An improved electrostatic memory system is de scribed fer a digital computer wherein a plarality of storage tubes are adapted to operate in either of two possible modes. According to the present irvention, duplicate storage tubes are provided fur each denominational order of the several binary digits. A single discriminator system is provided between corresponding duplicate tubes to determine the character of the infurmation stored in each. If either tube produces the selected type signal, corresponding to binazy "1" in the preferred embodiment, a "1" is regenerated in both tubes. In one mode of operation each bit of information is stored in two corresponding tubes, while in the other mode of operation each bit is stored in only one tube in the conventional manner.

  9. Versatile electrostatic trap

    SciTech Connect

    Veldhoven, Jacqueline van; Bethlem, Hendrick L.; Schnell, Melanie; Meijer, Gerard

    2006-06-15

    A four electrode electrostatic trap geometry is demonstrated that can be used to combine a dipole, quadrupole, and hexapole field. A cold packet of {sup 15}ND{sub 3} molecules is confined in both a purely quadrupolar and hexapolar trapping field and additionally, a dipole field is added to a hexapole field to create either a double-well or a donut-shaped trapping field. The profile of the {sup 15}ND{sub 3} packet in each of these four trapping potentials is measured, and the dependence of the well-separation and barrier height of the double-well and donut potential on the hexapole and dipole term are discussed.

  10. MEMS electrostatic influence machines

    NASA Astrophysics Data System (ADS)

    Phu Le, Cuong; Halvorsen, Einar

    2016-11-01

    This paper analyses the possibility of MEMS electrostatic influence machines using electromechanical switches like the historical predecessors did two centuries ago. We find that a generator design relying entirely on standard silicon-on-insulator(SOI) micromachining is conceivable and analyze its performance by simulations. The concept appears preferable over comparable diode circuits due to its higher maximum energy, faster charging and low precharging voltage. A full electromechanical lumped-model including parasitic capacitances of the switches is built to capture the dynamic of the generator. Simulation results show that the output voltage can be exponentially bootstrapped from a very low precharging voltage so that otherwise inadequately small voltage differences or charge imbalances can be made useful.

  11. STRONTIUM PRECIPITATION

    DOEpatents

    McKenzie, T.R.

    1960-09-13

    A process is given for improving the precipitation of strontium from an aqueous phosphoric-acid-containing solution with nickel or cobalt ferrocyanide by simultaneously precipitating strontium or calcium phosphate. This is accomplished by adding to the ferrocyanide-containing solution calcium or strontium nitrate in a quantity to yield a concentration of from 0.004 to 0.03 and adjusting the pH of the solution to a value of above 8.

  12. Teaching Electrostatics in University Courses

    ERIC Educational Resources Information Center

    Hughes, J. F.

    1974-01-01

    Describes an optional course on applied electrostatics that was offered to electrical engineers in their final year. Topics included the determination of electric fields, nature of the charging process, static electricity in liquids, solid state processes, charged particle applications, and electrostatic ignition. (GS)

  13. Micromachined silicon electrostatic chuck

    DOEpatents

    Anderson, Robert A.; Seager, Carleton H.

    1996-01-01

    An electrostatic chuck is faced with a patterned silicon plate 11, created y micromachining a silicon wafer, which is attached to a metallic base plate 13. Direct electrical contact between the chuck face 15 (patterned silicon plate's surface) and the silicon wafer 17 it is intended to hold is prevented by a pattern of flat-topped silicon dioxide islands 19 that protrude less than 5 micrometers from the otherwise flat surface of the chuck face 15. The islands 19 may be formed in any shape. Islands may be about 10 micrometers in diameter or width and spaced about 100 micrometers apart. One or more concentric rings formed around the periphery of the area between the chuck face 15 and wafer 17 contain a low-pressure helium thermal-contact gas used to assist heat removal during plasma etching of a silicon wafer held by the chuck. The islands 19 are tall enough and close enough together to prevent silicon-to-silicon electrical contact in the space between the islands, and the islands occupy only a small fraction of the total area of the chuck face 15, typically 0.5 to 5 percent. The pattern of the islands 19, together with at least one hole 12 bored through the silicon veneer into the base plate, will provide sufficient gas-flow space to allow the distribution of the helium thermal-contact gas.

  14. Micromachined silicon electrostatic chuck

    DOEpatents

    Anderson, R.A.; Seager, C.H.

    1996-12-10

    An electrostatic chuck is faced with a patterned silicon plate, created by micromachining a silicon wafer, which is attached to a metallic base plate. Direct electrical contact between the chuck face (patterned silicon plate`s surface) and the silicon wafer it is intended to hold is prevented by a pattern of flat-topped silicon dioxide islands that protrude less than 5 micrometers from the otherwise flat surface of the chuck face. The islands may be formed in any shape. Islands may be about 10 micrometers in diameter or width and spaced about 100 micrometers apart. One or more concentric rings formed around the periphery of the area between the chuck face and wafer contain a low-pressure helium thermal-contact gas used to assist heat removal during plasma etching of a silicon wafer held by the chuck. The islands are tall enough and close enough together to prevent silicon-to-silicon electrical contact in the space between the islands, and the islands occupy only a small fraction of the total area of the chuck face, typically 0.5 to 5 percent. The pattern of the islands, together with at least one hole bored through the silicon veneer into the base plate, will provide sufficient gas-flow space to allow the distribution of the helium thermal-contact gas. 6 figs.

  15. Electrostatic drops in orbit

    NASA Astrophysics Data System (ADS)

    Rodriguez, Isabel J.; Schmidt, Erin; Weislogel, Mark M.; Pettit, Donald

    2016-11-01

    We present what we think are the first intentional electrostatic orbits in the near-weightless environment of a drop tower. Classical physics problems involving Coulombic forces in orbital mechanics have traditionally been confined to thought experiments due to practical terrestrial experimental limitations, namely, the preponderance of gravity. However, the use of a drop tower as an experimental platform can overcome this challenge for brief periods. We demonstrate methanol-water droplets in orbit around a variety of charged objects- some of which can be used to validate special cases of N-body systems. Footage collected via a high-speed camera is analyzed and orbital trajectories are compared with existing theoretical predictions. Droplets of diameters 0.5 to 2mm in a variety of obits are observed. Due to the repeatability of drop tower initial conditions and effective low-g environment, such experiments may be used to construct empirical analogues and confirm analyses toward the benefit of other fields including space and planetary science. NASA Cooperative Agreement NNX12A047A, Portland State LSAMP, Robert E. McNair Scholars Program.

  16. The Electrostatic Bell

    NASA Astrophysics Data System (ADS)

    Martrou, Guillaume; Leonetti, Marc

    2016-11-01

    An initially static fluid-fluid interface is known to become unstable under a strong electric field leading to jet instability, surface pattern and spout formation. Applying an electric field to an initial dripping mode accelerates the dripping rate and leads to a continuous jet mode. We show that those two different configurations, when applied to dielectric liquids, can lead to the same instability, the formation of an unexpected macroscopic fluid bell-shape of typical size few times the capillary length even if the needle is as small as 200 μm . The instability results from the competition between the dielectric and the gravity forces, reminiscent of the Taylor-Melcher mechanism. The study is performed on several fluids of various densities, permittivity and surface tension on a large range of electric field. We show that the transition is an imperfect subcritical bifurcation with its characteristic bottleneck effect (lag time). Finally, in the case of flow rate, we established a shape diagram with four domains corresponding to dripping, jetting, bridge and electrostatic bell.

  17. Precipitation Matters

    ERIC Educational Resources Information Center

    McDuffie, Thomas

    2007-01-01

    Although weather, including its role in the water cycle, is included in most elementary science programs, any further examination of raindrops and snowflakes is rare. Together rain and snow make up most of the precipitation that replenishes Earth's life-sustaining fresh water supply. When viewed individually, raindrops and snowflakes are quite…

  18. Acceptance speech.

    PubMed

    Yusuf, C K

    1994-01-01

    I am proud and honored to accept this award on behalf of the Government of Bangladesh, and the millions of Bangladeshi children saved by oral rehydration solution. The Government of Bangladesh is grateful for this recognition of its commitment to international health and population research and cost-effective health care for all. The Government of Bangladesh has already made remarkable strides forward in the health and population sector, and this was recognized in UNICEF's 1993 "State of the World's Children". The national contraceptive prevalence rate, at 40%, is higher than that of many developed countries. It is appropriate that Bangladesh, where ORS was discovered, has the largest ORS production capacity in the world. It was remarkable that after the devastating cyclone in 1991, the country was able to produce enough ORS to meet the needs and remain self-sufficient. Similarly, Bangladesh has one of the most effective, flexible and efficient control of diarrheal disease and epidemic response program in the world. Through the country, doctors have been trained in diarrheal disease management, and stores of ORS are maintained ready for any outbreak. Despite grim predictions after the 1991 cyclone and the 1993 floods, relatively few people died from diarrheal disease. This is indicative of the strength of the national program. I want to take this opportunity to acknowledge the contribution of ICDDR, B and the important role it plays in supporting the Government's efforts in the health and population sector. The partnership between the Government of Bangladesh and ICDDR, B has already borne great fruit, and I hope and believe that it will continue to do so for many years in the future. Thank you.

  19. PREFACE: 7th International Conference on Applied Electrostatics (ICAES-2012)

    NASA Astrophysics Data System (ADS)

    Li, Jie

    2013-03-01

    ICAES is an important conference organized every four years by the Committee on Electrostatics of the Chinese Physical Society, which serves as a forum for scientists, educators and engineers interested in the fundamentals, applications, disasters and safety of electrostatics, etc. In recent years, new techniques, applications and fundamental theories on electrostatics have developed considerably. ICAES-7, held in Dalian, China, from 17-19 September 2012, aimed to provide a forum for all scholars to report the newest developments in electrostatics, to probe the questions that scholars faced and to discuss fresh ideas related to electrostatics. ICAES-7 was co-organized and hosted by Dalian University of Technology, and was sponsored by the Ministry of Education of China, the National Natural Science Foundation of China, Dalian University of Technology, Nanjing Suman Electronics Co. Ltd (Suman, China), Shekonic (Yangzhou Shuanghong, China) Electric/Mechanical Co. Ltd, and Suzhou TA&A Ultra Clean Technology Co. Ltd. (China). On behalf of the organizing committee of ICAES-7, I express my great appreciation for their support of the conference. Over 160 scholars and engineers from many countries including Croatia, The Czech Republic, D.P.R. Korea, Germany, Japan, Malaysia, Poland, Russia, the United States of America, China attended ICAES-7, and the conference collected and selected 149 papers for publication. The subjects of those papers cover the fundamentals of electrostatics, electrostatic disaster and safety, and electrostatic application (e.g. precipitation, pollutant control, biological treatment, mixture separation and food processing, etc). I cordially thank all authors and attendees for their support, and my appreciation is also given to the conference honorary chair, the organizing committee and advisory committee, and the conference secretaries for their hard work. ICAES-7 is dedicated to the memory of Professor Jen-Shih Chang (professor emeritus in the

  20. Explosion safety in industrial electrostatics

    NASA Astrophysics Data System (ADS)

    Szabó, S. V.; Kiss, I.; Berta, I.

    2011-01-01

    Complicated industrial systems are often endangered by electrostatic hazards, both from atmospheric (lightning phenomenon, primary and secondary lightning protection) and industrial (technological problems caused by static charging and fire and explosion hazards.) According to the classical approach protective methods have to be used in order to remove electrostatic charging and to avoid damages, however no attempt to compute the risk before and after applying the protective method is made, relying instead on well-educated and practiced expertise. The Budapest School of Electrostatics - in close cooperation with industrial partners - develops new suitable solutions for probability based decision support (Static Control Up-to-date Technology, SCOUT) using soft computing methods. This new approach can be used to assess and audit existing systems and - using the predictive power of the models - to design and plan activities in industrial electrostatics.

  1. Computational Methods for Biomolecular Electrostatics

    PubMed Central

    Dong, Feng; Olsen, Brett; Baker, Nathan A.

    2008-01-01

    An understanding of intermolecular interactions is essential for insight into how cells develop, operate, communicate and control their activities. Such interactions include several components: contributions from linear, angular, and torsional forces in covalent bonds, van der Waals forces, as well as electrostatics. Among the various components of molecular interactions, electrostatics are of special importance because of their long range and their influence on polar or charged molecules, including water, aqueous ions, and amino or nucleic acids, which are some of the primary components of living systems. Electrostatics, therefore, play important roles in determining the structure, motion and function of a wide range of biological molecules. This chapter presents a brief overview of electrostatic interactions in cellular systems with a particular focus on how computational tools can be used to investigate these types of interactions. PMID:17964951

  2. Electrostatic prepregging of thermoplastic matrices

    NASA Technical Reports Server (NTRS)

    Muzzy, John D.; Varughese, Babu; Thammongkol, Vivan; Tincher, Wayne

    1989-01-01

    Thermoplastic towpregs of PEEK/AS-4, PEEK/S-2 glass and LaRC-TPI/AS-4, produced by electrostatic deposition of charged and fluidized polymer powders on spread continuous fiber tows, are described. Processing parameters for combining PEEK 150 powder with unsized 3k AS-4 carbon fiber are presented. The experimental results for PEEK 150/AS-4 reveal that electrostatic fluidized bed coating may be an economically attractive process for producing towpreg.

  3. Acidic precipitation

    SciTech Connect

    Martin, H.C.

    1987-01-01

    At the International Symposium on Acidic Precipitation, over 400 papers were presented, and nearly 200 of them are included here. They provide an overview of the present state of the art of acid rain research. The Conference focused on atmospheric science (monitoring, source-receptor relationships), aquatic effects (marine eutrophication, lake acidification, impacts on plant and fish populations), and terrestrial effects (forest decline, soil acidification, etc.).

  4. Electrostatic testing of thin plastic materials

    NASA Technical Reports Server (NTRS)

    Skinner, S. Ballou

    1988-01-01

    Ten thin plastic materials (Velostat, RCAS 1200, Llumalloy, Herculite 80, RCAS 2400, Wrightlon 7000, PVC, Aclar 22A, Mylar, and Polyethylene) were tested for electrostatic properties by four different devices: (1) The static decay meter, (2) the manual triboelectric testing device, (3) the robotic triboelectric testing device, and (4) the resistivity measurement adapter device. The static decay meter measured the electrostatic decay rates in accordance with the Federal Test Method Standard 101B, Method 4046. The manual and the robotic triboelectric devices measured the triboelectric generated peak voltages and the five-second decay voltages in accordance with the criteria for acceptance standards at Kennedy Space Center. The resistivity measurement adapter measured the surface resistivity of each material. An analysis was made to correlate the data among the four testing devices. For the material tested the pass/fail results were compared for the 4046 method and the triboelectric testing devices. For the limited number of materials tested, the relationship between decay rate and surface resistivity was investigated as well as the relationship between triboelectric peak voltage and surface resistivity.

  5. Engineering scale electrostatic enclosure demonstration

    SciTech Connect

    Meyer, L.C.

    1993-09-01

    This report presents results from an engineering scale electrostatic enclosure demonstration test. The electrostatic enclosure is part of an overall in-depth contamination control strategy for transuranic (TRU) waste recovery operations. TRU contaminants include small particles of plutonium compounds associated with defense-related waste recovery operations. Demonstration test items consisted of an outer Perma-con enclosure, an inner tent enclosure, and a ventilation system test section for testing electrostatic curtain devices. Three interchangeable test fixtures that could remove plutonium from the contaminated dust were tested in the test section. These were an electret filter, a CRT as an electrostatic field source, and an electrically charged parallel plate separator. Enclosure materials tested included polyethylene, anti-static construction fabric, and stainless steel. The soil size distribution was determined using an eight stage cascade impactor. Photographs of particles containing plutonium were obtained with a scanning electron microscope (SEM). The SEM also provided a second method of getting the size distribution. The amount of plutonium removed from the aerosol by the electrostatic devices was determined by radiochemistry from input and output aerosol samplers. The inner and outer enclosures performed adequately for plutonium handling operations and could be used for full scale operations.

  6. Optimal high-voltage energization of corona-electrostatic separators

    SciTech Connect

    Iuga, A.; Neamtu, V.; Suarasan, I.; Morar, R.; Dascalescu, L.

    1998-03-01

    The selection of the high-voltage supply can play an important role in the optimization of electrostatic separation processes. This paper aims to evaluate the influence of the main high-voltage parameters (waveform, polarity, level) on the efficiency of electrostatic separation, in the case of insulation-metal granular mixtures. A roll-type laboratory high-tension separator was employed for the experimental study, and the tests were carried out with samples of granular materials taken from the technological flowsheet of a recycling plant for electric wire scraps. The oscillograms of the voltage and of the current across the separator proved to be of great use for studying the transition from corona to spark discharges. The experiments, performed under various operating conditions (roll speed, roll radius, high-voltage level, interelectrode distance), show the existence of a strong interdependence between these parameters, the frequency of spark discharges, and the efficiency of the separation process. The reported results suggest that monitoring the frequency of spark discharges, and the efficiency of the separation process. The reported results suggest that monitoring the frequency of the spark discharges could be of use for controlling the optimum operating voltage for a given electrostatic separation application. Although the full-wave rectifier allows for lower operating voltages than the half-wave rectifier, its general effectiveness in electrostatic separation processes is superior. Good insulation-metal electrostatic separation can be achieved at either positive or negative polarity of the high-voltage supply, but negative electrode energization is recommended for most industrial applications. The methodology proposed in this paper might be successfully employed for establishing the optimal operating conditions of electrode energization for other applications, such as electrostatic precipitation, plasma chemical purification of gases, or charge

  7. Electrostatically actuatable light modulating device

    DOEpatents

    Koehler, Dale R.

    1991-01-01

    The electrostatically actuatable light modulator utilizes an opaque substrate plate patterned with an array of aperture cells, the cells comprised of physically positionable dielectric shutters and electrostatic actuators. With incorporation of a light source and a viewing screen, a projection display system is effected. Inclusion of a color filter array aligned with the aperture cells accomplishes a color display. The system is realized in terms of a silicon based manufacturing technology allowing fabrication of a high resolution capability in a physically small device which with the utilization of included magnification optics allows both large and small projection displays.

  8. Polarizable multipolar electrostatics for cholesterol

    NASA Astrophysics Data System (ADS)

    Fletcher, Timothy L.; Popelier, Paul L. A.

    2016-08-01

    FFLUX is a novel force field under development for biomolecular modelling, and is based on topological atoms and the machine learning method kriging. Successful kriging models have been obtained for realistic electrostatics of amino acids, small peptides, and some carbohydrates but here, for the first time, we construct kriging models for a sizeable ligand of great importance, which is cholesterol. Cholesterol's mean total (internal) electrostatic energy prediction error amounts to 3.9 kJ mol-1, which pleasingly falls below the threshold of 1 kcal mol-1 often cited for accurate biomolecular modelling. We present a detailed analysis of the error distributions.

  9. Electrostatics at the molecular level

    NASA Astrophysics Data System (ADS)

    Zürcher, Ulrich

    2017-01-01

    In molecular systems, positive and negative charges are separated, making them ideal systems to examine electrostatic interactions. The attractive force between positive and negative charges is balanced by repulsive ‘forces’ that are quantum-mechanical in origin. We introduce an ‘effective’ potential energy that captures the repulsion; it allows us to obtain fairly accurate estimates of the bonding properties of molecular systems. We use units (e.g., kcal mol-1 for energy) that emphasize the relevance of electrostatics to macroscopic behavior.

  10. Fabrication of nanoscale electrostatic lenses

    NASA Astrophysics Data System (ADS)

    Sinno, I.; Sanz-Velasco, A.; Kang, S.; Jansen, H.; Olsson, E.; Enoksson, P.; Svensson, K.

    2010-09-01

    The fabrication of cylindrical multi-element electrostatic lenses at the nanoscale presents a challenge; they are high-aspect-ratio structures that should be rotationally symmetric, well aligned and freestanding, with smooth edges and flat, clean surfaces. In this paper, we present the fabrication results of a non-conventional process, which uses a combination of focused gallium ion-beam milling and hydrofluoric acid vapor etching. This process makes it possible to fabricate nanoscale electrostatic lenses down to 140 nm in aperture diameter and 4.2 µm in column length, with a superior control of the geometry as compared to conventional lithography-based techniques.

  11. Charge sniffer for electrostatics demonstrations

    NASA Astrophysics Data System (ADS)

    Dinca, Mihai P.

    2011-02-01

    An electronic electroscope with a special design for demonstrations and experiments on static electricity is described. It operates as an electric charge sniffer by detecting slightly charged objects when they are brought to the front of its sensing electrode. The sniffer has the advantage of combining high directional sensitivity with a logarithmic bar display. It allows for the identification of electric charge polarity during charge separation by friction, peeling, electrostatic induction, batteries, or secondary coils of power transformers. Other experiments in electrostatics, such as observing the electric field of an oscillating dipole and the distance dependence of the electric field generated by simple charge configurations, are also described.

  12. Electrostatic electron cyclotron harmonic instability near Ganymede

    NASA Astrophysics Data System (ADS)

    Tripathi, A. K.; Singhal, R. P.; Singh, K. P.; Singh, O. N.

    2014-08-01

    Jupiter's moon—Ganymede—is the largest satellite in our solar system. Galileo spacecraft made six close flybys to explore Ganymede. More information was acquired about particle population, magnetic field and plasma waves during these encounters. In this paper, our aim is to study the generation of electrostatic electron cyclotron harmonic (ECH) emissions in the vicinity of Ganymede using the observed particle data. The calculated ECH wave's growth rates are analyzed in the light of observations of plasma waves along the path of Galileo near Ganymede. Dispersion relation for electrostatic mode is solved to obtain the temporal growth rates. A new electron distribution function, fitted to distribution observed near Ganymede, is used in the calculations. A parametric study is performed to evaluate the effect of loss-cone angle and the ratio of plasma to gyro-frequency on growth rates. It is found that ECH waves growth rates generally decrease as the loss-cone angle is increased. However, the ratio plasma to gyro-frequency has almost no effect on the growth rates. These parameters vary considerably along the Galileo trajectory near Ganymede. This is the first study which relates the occurrence of ECH waves with the particle and magnetic field data in the vicinity of Ganymede. The study of ECH wave growth rate near Ganymede is important for the calculation of pitch angle scattering rates of low-energy electrons and their subsequent precipitation into the thin atmosphere of Ganymede producing ultraviolet emissions. Results of the present study may also be relevant for the upcoming JUNO and JUICE missions to Jupiter.

  13. High volume, multiple use, portable precipitator

    DOEpatents

    Carlson, Duane C.

    2011-10-25

    A portable high air volume electrostatic collection precipitator for analyzing air is provided which is a relatively small, self-contained device. The device has a collection electrode adapted to carry a variety of collecting media. An air intake is provided such that air to be analyzed flows through an ionization section with a transversely positioned ionization wire to ionize analytes in the air, and then flows over the collection electrode where ionized analytes are collected. Air flow is maintained at but below turbulent flow, Ionizable constituents in the air are ionized, attracted to the collection electrode, and precipitated in the selected medium which can be removed for analysis.

  14. Defining protein electrostatic recognition processes

    NASA Astrophysics Data System (ADS)

    Getzoff, Elizabeth D.; Roberts, Victoria A.

    The objective is to elucidate the nature of electrostatic forces controlling protein recognition processes by using a tightly coupled computational and interactive computer graphics approach. The TURNIP program was developed to determine the most favorable precollision orientations for two molecules by systematic search of all orientations and evaluation of the resulting electrostatic interactions. TURNIP was applied to the transient interaction between two electron transfer metalloproteins, plastocyanin and cytochrome c. The results suggest that the productive electron-transfer complex involves interaction of the positive region of cytochrome c with the negative patch of plastocyanin, consistent with experimental data. Application of TURNIP to the formation of the stable complex between the HyHEL-5 antibody and its protein antigen lysozyme showed that long-distance electrostatic forces guide lysozyme toward the HyHEL-5 binding site, but do not fine tune its orientation. Determination of docked antigen/antibody complexes requires including steric as well as electrostatic interactions, as was done for the U10 mutant of the anti-phosphorylcholine antibody S107. The graphics program Flex, a convenient desktop workstation program for visualizing molecular dynamics and normal mode motions, was enhanced. Flex now has a user interface and was rewritten to use standard graphics libraries, so as to run on most desktop workstations.

  15. Observation of weak HF electrostatic turbulence in the auroral ionosphere

    NASA Astrophysics Data System (ADS)

    Pottelette, R.; Illiano, J. M.

    1982-07-01

    A numerical calculation of the cross spectrum of random signals received by two small antennas that were immersed in a two-component magnetoplasma has been conducted, for the case of a plasma model consisting of a cool and a warm component. The data were compiled by the HF electrostatic wave detection experiment of the Porcupine F3 rocket. A linear calculation of the natural electrostatic emissions detected around the electron gyrofrequency three-halves harmonic and around the upper hybrid frequency shows that their amplitudes are above the plasma thermal noise level. It is noted that the low energy precipitating suprathermal electrons present are highly anisotropic and enhance the three-halves electron gyrofrequency noise, although the electron distribution function remains stable and the most intense emissions are observed around the upper hybrid frequency.

  16. Quantitative nanoscale electrostatics of viruses

    NASA Astrophysics Data System (ADS)

    Hernando-Pérez, M.; Cartagena-Rivera, A. X.; Lošdorfer Božič, A.; Carrillo, P. J. P.; San Martín, C.; Mateu, M. G.; Raman, A.; Podgornik, R.; de Pablo, P. J.

    2015-10-01

    Electrostatics is one of the fundamental driving forces of the interaction between biomolecules in solution. In particular, the recognition events between viruses and host cells are dominated by both specific and non-specific interactions and the electric charge of viral particles determines the electrostatic force component of the latter. Here we probe the charge of individual viruses in liquid milieu by measuring the electrostatic force between a viral particle and the Atomic Force Microscope tip. The force spectroscopy data of co-adsorbed φ29 bacteriophage proheads and mature virions, adenovirus and minute virus of mice capsids is utilized for obtaining the corresponding density of charge for each virus. The systematic differences of the density of charge between the viral particles are consistent with the theoretical predictions obtained from X-ray structural data. Our results show that the density of charge is a distinguishing characteristic of each virus, depending crucially on the nature of the viral capsid and the presence/absence of the genetic material.Electrostatics is one of the fundamental driving forces of the interaction between biomolecules in solution. In particular, the recognition events between viruses and host cells are dominated by both specific and non-specific interactions and the electric charge of viral particles determines the electrostatic force component of the latter. Here we probe the charge of individual viruses in liquid milieu by measuring the electrostatic force between a viral particle and the Atomic Force Microscope tip. The force spectroscopy data of co-adsorbed φ29 bacteriophage proheads and mature virions, adenovirus and minute virus of mice capsids is utilized for obtaining the corresponding density of charge for each virus. The systematic differences of the density of charge between the viral particles are consistent with the theoretical predictions obtained from X-ray structural data. Our results show that the density of

  17. Asteroid electrostatic instrumentation and modelling

    NASA Astrophysics Data System (ADS)

    Aplin, K. L.; Bowles, N. E.; Urbak, E.; Keane, D.; Sawyer, E. C.

    2011-06-01

    Asteroid surface material is expected to become photoelectrically charged, and is likely to be transported through electrostatic levitation. Understanding any movement of the surface material is relevant to proposed space missions to return samples to Earth for detailed isotopic analysis. Motivated by preparations for the Marco Polo sample return mission, we present electrostatic modelling for a real asteroid, Itokawa, for which detailed shape information is available, and verify that charging effects are likely to be significant at the terminator and at the edges of shadow regions for the Marco Polo baseline asteroid, 1999JU3. We also describe the Asteroid Charge Experiment electric field instrumentation intended for Marco Polo. Finally, we find that the differing asteroid and spacecraft potentials on landing could perturb sample collection for the short landing time of 20min that is currently planned.

  18. Electrostatic Gating of Ultrathin Films

    NASA Astrophysics Data System (ADS)

    Goldman, A. M.

    2014-07-01

    Electrostatic gating of ultrathin films can be used to modify electronic and magnetic properties of materials by effecting controlled alterations of carrier concentration while, in principle, not changing the level of disorder. As such, electrostatic gating can facilitate the development of novel devices and can serve as a means of exploring the fundamental properties of materials in a manner far simpler than is possible with the conventional approach of chemical doping. The entire phase diagram of a compound can be traversed by changing the gate voltage. In this review, we survey results involving conventional field effect devices as well as more recent progress, which has involved structures that rely on electrochemical configurations such as electric double-layer transistors. We emphasize progress involving thin films of oxide materials such as high-temperature superconductors, magnetic oxides, and oxides that undergo metal-insulator transitions.

  19. Closed loop electrostatic levitation system

    NASA Technical Reports Server (NTRS)

    Rhim, W. K.; Saffren, M. M.; Elleman, D. D. (Inventor)

    1985-01-01

    An electrostatic levitation system is described, which can closely control the position of objects of appreciable size. A plurality of electrodes surround the desired position of an electrostatically charged object, the position of the objects is monitored, and the voltages applied to the electrodes are varied to hold the object at a desired position. In one system, the object is suspended above a plate-like electrode which has a concave upper face to urge the object toward the vertical axis of the curved plate. An upper electrode that is also curved can be positioned above the object, to assure curvature of the field at any height above the lower plate. In another system, four spherical electrodes are positioned at the points of a tetrahedron, and the voltages applied to the electrodes are varied in accordance with the object position as detected by two sensors.

  20. Electrostatic interactions in molecular materials

    NASA Astrophysics Data System (ADS)

    Painelli, Anna; Terenziani, Francesca

    2004-03-01

    Non-additive collective behavior appears in molecular materials as a result of intermolecular interactions. We present a model for interacting polar and polarizable molecules that applies to different supramolecular architectures of donor-π-acceptor molecules. We follow a bottom-up modeling strategy: the detailed analysis of spectroscopic data of solvated molecules leads to the definition of a simple two-state model for the molecular units. Classical electrostatic interactions are then introduced to model molecular clusters. The molecular properties are strickingly affected by supramolecular interactions, as demonstrated by spectroscopic studies. Brand new phenomena, like phase transitions and multielectron transfer, with no counterpart at the molecular level are observed as direct consequences of electrostatic intermolecular interactions.

  1. Electrostatic Spraying With Conductive Liquids

    NASA Technical Reports Server (NTRS)

    Kosmo, Joseph J.; Dawn, Frederic S.; Erlandson, Robert E.; Atkins, Loren E.

    1989-01-01

    Thin, uniform polymer coatings applied in water base normally impossible to charge. Electrostatic sprayer modified so applies coatings suspended or dissolved in electrically conductive liquids. Nozzle and gun constructed of nonconductive molded plastic. Liquid passageway made long enough electrical leakage through it low. Coaxial hose for liquid built of polytetrafluoroethylene tube, insulating sleeve, and polyurethane jacket. Sprayer provided with insulated seal at gun-to-hose connection, nonconductive airhose, pressure tank electrically isolated from ground, and special nozzle electrode. Supply of atomizing air reduced so particle momentum controlled by electrostatic field more effectively. Developed to apply water-base polyurethane coating to woven, shaped polyester fabric. Coating provides pressure seal for fabric, which is part of spacesuit. Also useful for applying waterproof, decorative, or protective coatings to fabrics for use on Earth.

  2. Electrostatic generator/motor configurations

    DOEpatents

    Post, Richard F

    2014-02-04

    Electrostatic generators/motors designs are provided that generally may include a first cylindrical stator centered about a longitudinal axis; a second cylindrical stator centered about the axis, a first cylindrical rotor centered about the axis and located between the first cylindrical stator and the second cylindrical stator. The first cylindrical stator, the second cylindrical stator and the first cylindrical rotor may be concentrically aligned. A magnetic field having field lines about parallel with the longitudinal axis is provided.

  3. Electrostatic forces for personnel restraints

    NASA Technical Reports Server (NTRS)

    Ashby, N.; Ciciora, J.; Gardner, R.; Porter, K.

    1977-01-01

    The feasibility of utilizing electrostatic forces for personnel retention devices on exterior spacecraft surfaces was analyzed. The investigation covered: (1) determination of the state of the art; (2) analysis of potential adhesion surfaces; (3) safety considerations for personnel; (4) electromagnetic force field determination and its effect on spacecraft instrumentation; and (5) proposed advances to current technology based on documentation review, analyses, and experimental test data.

  4. Defining Protein Electrostatic Recognition Processes

    DTIC Science & Technology

    1992-01-01

    electrostatic Interactions, as we have done for the U10 mutant of the antl- phosphorylcholine antibody S107. We have enhanced the graphics program Fla, a...10486 9393-10486 phosphorylcholine -binding antibody S107, (Chign et al., 1989; Behar et al., 1989). This mutant antibody results from a single-site...mutation of Asp 101 to Ala, over 9 A distant from the antigen binding site, which results in a complete loss of phosphorylcholine binding activity. A

  5. Monitoring Mars for Electrostatic Disturbances

    NASA Technical Reports Server (NTRS)

    Compton, D.

    2011-01-01

    The DSN radio telescope DSS-13 was used to monitor Mars for electrostatic discharges from 17 February to 11 April, 2010, and from 19 April to 4 May, 2011, over a total of 72 sessions. Of these sessions, few showed noteworthy results and no outstanding electrostatic disturbances were observed on Mars from analyzing the kurtosis of radio emission from Mars. Electrostatic discharges on mars were originally detected in June of 2006 by Ruf et al. using DSS-13. he kurtosis (normalized fourth moment of the electrical field strength) is sensitive to non-thermal radiation. Two frequencies bands, either 2.4 and 8.4 GHz or 8.4 and 32 GHz were used. The non-thermal radiation spectrum should have peaks at the lowest three modes of the theoretical Schumann Resonances of Mars. The telescope was pointed away from Mars every 5 minutes for 45 seconds to confirm if Mars was indeed the sources of any events. It was shown that by including a down-link signal in one channel and by observing when the kurtosis changed as the telescope was pointed away from the source that the procedure can monitor Mars without the need of extra equipment monitoring a control source.

  6. KSC Electrostatic Discharge (ESD) Issues

    NASA Technical Reports Server (NTRS)

    Buhler, Charles

    2008-01-01

    Discussion of key electrostatic issues that have arisen during the past few years at KSC that the Electrostatics Laboratory has studied. The lab has studied in depth the Space Shuttle's Thermal Control System Blankets, the International Space Station Thermal Blanket, the Pan/Tilt Camera Blankets, the Kapton Purge Barrier Curtain, the Aclar Purge Barrier Curtain, the Thrust Vector Controller Blankets, the Tyvek Reaction Control System covers, the AID-PAK and FLU-9 pyro inflatable devices, the Velostat Solid Rocket Booster mats, and the SCAPE suits. In many cases these materials are insulating meaning that they might be a source of unsafe levels of electrostatic discharge (ESD). For each, the lab provided in-depth testing of each material within its current configuration to ensure that it does not cause an ESD concern that may violate the safety of the astronauts, the workers and equipment for NASA. For example the lab provides unique solutions and testing such as Spark Incendivity Testing that checks whether a material is capable of generating a spark strong enough to ignite a flammable gas. The lab makes recommendations to changes in specifications, procedures, and material if necessary. The lab also consults with a variety of non-safety related ESD issues for the agency.

  7. Sulfate removal from waste chemicals by precipitation.

    PubMed

    Benatti, Cláudia Telles; Tavares, Célia Regina Granhen; Lenzi, Ervim

    2009-01-01

    Chemical oxidation using Fenton's reagent has proven to be a viable alternative to the oxidative destruction of organic pollutants in mixed waste chemicals, but the sulfate concentration in the treated liquor was still above the acceptable limits for effluent discharge. In this paper, the feasibility of sulfate removal from complex laboratory wastewaters using barium and calcium precipitation was investigated. The process was applied to different wastewater cases (two composite samples generated in different periods) in order to study the effect of the wastewater composition on the sulfate precipitation. The experiments were performed with raw and oxidized wastewater samples, and carried out according to the following steps: (1) evaluate the pH effect upon sulfate precipitation on raw wastewaters at pH range of 2-8; (2) conduct sulfate precipitation experiments on raw and oxidized wastewaters; and (3) characterize the precipitate yielded. At a concentration of 80 g L(-1), barium precipitation achieved a sulfate removal up to 61.4% while calcium precipitation provided over 99% sulfate removal in raw and oxidized wastewaters and for both samples. Calcium precipitation was chosen to be performed after Fenton's oxidation; hence this process configuration favors the production of higher quality precipitates. The results showed that, when dried at 105 degrees C, the precipitate is composed of hemidrate and anhydrous calcium sulfate ( approximately 99.8%) and trace metals ( approximately 0.2%: Fe, Cr, Mn, Co, Ag, Mg, K, Na), what makes it suitable for reuse in innumerous processes.

  8. Electrostatic effects in collagen fibrillization

    NASA Astrophysics Data System (ADS)

    Morozova, Svetlana; Muthukumar, Murugappan

    2014-03-01

    Using light scattering and AFM techniques, we have measured the kinetics of fibrillization of collagen (pertinent to the vitreous of human eye) as a function of pH and ionic strength. At higher and lower pH, collagen triple-peptides remain stable in solution without fibrillization. At neutral pH, the fibrillization occurs and its growth kinetics is slowed upon either an increase in ionic strength or a decrease in temperature. We present a model, based on polymer crystallization theory, to describe the observed electrostatic nature of collagen assembly.

  9. Keplerate cluster (Mo-132) mediated electrostatic assembly of nanoparticles.

    PubMed

    Gooch, Jonathan; Jalan, Abhishek A; Jones, Stephanie; Hine, Corey R; Alam, Rabeka; Garai, Somenath; Maye, Mathew M; Müller, Achim; Zubieta, Jon

    2014-10-15

    The electrostatic assembly between a series of differently charged Mo-132-type Keplerates present in the compounds (NH4)42[{(Mo(VI))Mo(VI)5O21(H2O)6}12 {Mo(V)2O4(CH3COO)}30].ca. {300 H2O+10 CH3COONH4} (Mo-132a), (NH4)72-n[{(H2O)81-n+(NH4)n} {(Mo(VI))Mo(VI)5O21(H2O)6}12 {Mo(V)2O4(SO4)}30].ca. 200 H2O (Mo-132b), and Na10(NH4)62[{(Mo(VI))Mo(VI)5O21(H2O)6}12 {Mo(V)2O4(HPO4)}30]. ca. {300H2O+2Na(+)+2NH4(+)+4H2PO4(-)} (Mo-132c) with cationic gold nanoparticles (AuNPs) was investigated for the first time. The rapid electrostatic assembly from nanoscopic entities to micron scale aggregates was observed upon precipitation, which closely matched the point of aggregate electroneutrality. Successful assembly was demonstrated using UV-vis, DLS, TEM, and zeta-potential analysis. Results indicate that the point at which precipitation occurs is related to charge balance or electroneutrality, and that counterions at both the Mo-132 and AuNP play a significant role in assembly.

  10. DREA-Developed Approach to Computer Simulation of ESD (Electrostatic Charging/Discharging) in Space Systems

    DTIC Science & Technology

    2001-11-01

    8217, developed in-house. The results are displayed, also with in house developed code called ’ Docker ’. Several examples of deep electrostatic charging...ESD) in dielectric materials, satellite and components are given. Manuals for the ’ Docker ’ and the ’ACCEPT’ codes are available upon request.

  11. Electrostatic potential map modelling with COSY Infinity

    NASA Astrophysics Data System (ADS)

    Maloney, J. A.; Baartman, R.; Planche, T.; Saminathan, S.

    2016-06-01

    COSY Infinity (Makino and Berz, 2005) is a differential-algebra based simulation code which allows accurate calculation of transfer maps to arbitrary order. COSY's existing internal procedures were modified to allow electrostatic elements to be specified using an array of field potential data from the midplane. Additionally, a new procedure was created allowing electrostatic elements and their fringe fields to be specified by an analytic function. This allows greater flexibility in accurately modelling electrostatic elements and their fringe fields. Applied examples of these new procedures are presented including the modelling of a shunted electrostatic multipole designed with OPERA, a spherical electrostatic bender, and the effects of different shaped apertures in an electrostatic beam line.

  12. Electrostatic properties of graphitic nanostructures

    NASA Astrophysics Data System (ADS)

    Erbahar, Dogan

    2014-03-01

    Carbon nanostructures are considered to be one of the most important candidates of circuit elements for future nanoelectronics. However, being one of the main issues of conventional circuitry used today, charge accumulation on circuit elements can also be expected to have important effects on the performance of the nanoscale devices. In this work we investigated charge accumulation on various graphitic systems by simulated charge doping. We report ab initio density functional theory (DFT) calculations of electrostatically charged multilayered carbon nano structures. We investigate the effect of total and background charge on charge distribution profiles on the systems under consideration varying from multilayered graphene to multiwalled carbon nanotubes. We show that the charge distribution profile on the inner layers are mainly induced from the background charge which is imposed by the code on periodic systems. Our population anaylsis indicates that the outermost two layers effectively shields the inner layers electrostatically. Illuminating the typical skin depth of those systems our results could give important insights for designing the nanocircuit elements.

  13. Electrostatic Tuning of Cellular Excitability

    PubMed Central

    Börjesson, Sara I.; Parkkari, Teija; Hammarström, Sven; Elinder, Fredrik

    2010-01-01

    Abstract Voltage-gated ion channels regulate the electric activity of excitable tissues, such as the heart and brain. Therefore, treatment for conditions of disturbed excitability is often based on drugs that target ion channels. In this study of a voltage-gated K channel, we propose what we believe to be a novel pharmacological mechanism for how to regulate channel activity. Charged lipophilic substances can tune channel opening, and consequently excitability, by an electrostatic interaction with the channel's voltage sensors. The direction of the effect depends on the charge of the substance. This was shown by three compounds sharing an arachidonyl backbone but bearing different charge: arachidonic acid, methyl arachidonate, and arachidonyl amine. Computer simulations of membrane excitability showed that small changes in the voltage dependence of Na and K channels have prominent impact on excitability and the tendency for repetitive firing. For instance, a shift in the voltage dependence of a K channel with −5 or +5 mV corresponds to a threefold increase or decrease in K channel density, respectively. We suggest that electrostatic tuning of ion channel activity constitutes a novel and powerful pharmacological approach with which to affect cellular excitability. PMID:20141752

  14. Breakdown mechanisms in electrostatic deflector

    NASA Astrophysics Data System (ADS)

    Re, M.; Cuttone, G.; Zappalà, E.; Passarello, S.

    2001-12-01

    The Electrostatic Beam Deflectors for the K800 Superconducting Cyclotron are the most critical elements of the beam extraction system. It has been carried out an accurate investigation from the microscopic point of view, leading to a better comprehension of the complex phenomena taking part in the breakdown process. The environmental conditions are high electric field (up to 130 kV/cm), high magnetic field (up to 5 T) in addition with high energy (70 MeV/u) and high power ion beam. It has been found that all the materials constituent the electrostatic deflector, and not only the electrodes, give an important contribute to the mechanism of breakdown that occurs in two main ways: insulator metalization and enhanced electrodes electron emission. These two effects are involved in a positive feedback process which amplifies the effects leading to a fast breakdown. These phenomena are here shown and some possible solutions are at the moment under test using several bulk (Mo, Ti, Cu) and coating materials (TiN, Diamond Like Carbon).

  15. Electrostatic charging of lunar dust

    SciTech Connect

    Walch, Bob; Horanyi, Mihaly; Robertson, Scott

    1998-10-21

    Transient dust clouds suspended above the lunar surface were indicated by the horizon glow observed by the Surveyor spacecrafts and the Lunar Ejecta and Meteorite Experiment (Apollo 17), for example. The theoretical models cannot fully explain these observations, but they all suggest that electrostatic charging of the lunar surface due to exposure to the solar wind plasma and UV radiation could result in levitation, transport and ejection of small grains. We report on our experimental studies of the electrostatic charging properties of an Apollo-17 soil sample and two lunar simulants MLS-1 and JSC-1. We have measured their charge after exposing individual grains to a beam of fast electrons with energies in the range of 20{<=}E{<=}90 eV. Our measurements indicate that the secondary electron emission yield of the Apollo-17 sample is intermediate between MLS-1 and JSC-1, closer to that of MLS-1. We will also discuss our plans to develop a laboratory lunar surface model, where time dependent illumination and plasma bombardment will closely emulate the conditions on the surface of the Moon.

  16. Microencapsulation and Electrostatic Processing Device

    NASA Technical Reports Server (NTRS)

    Morrison, Dennis R. (Inventor); Mosier, Benjamin (Inventor); Cassanto, John M. (Inventor)

    2001-01-01

    A microencapsulation and electrostatic processing (MEP) device is provided for forming microcapsules. In one embodiment, the device comprises a chamber having a filter which separates a first region in the chamber from a second region in the chamber. An aqueous solution is introduced into the first region through an inlet port, and a hydrocarbon/ polymer solution is introduced into the second region through another inlet port. The filter acts to stabilize the interface and suppress mixing between the two immiscible solutions as they are being introduced into their respective regions. After the solutions have been introduced and have become quiescent, the interface is gently separated from the filter. At this point, spontaneous formation of microcapsules at the interface may begin to occur, or some fluid motion may be provided to induce microcapsule formation. In any case, the fluid shear force at the interface is limited to less than 100 dynes/sq cm. This low-shear approach to microcapsule formation yields microcapsules with good sphericity and desirable size distribution. The MEP device is also capable of downstream processing of microcapsules, including rinsing, re-suspension in tertiary fluids, electrostatic deposition of ancillary coatings, and free-fluid electrophoretic separation of charged microcapsules.

  17. Molecular electrostatic potential as a graph.

    PubMed

    Daza, Edgar E; Maza, Julio; Torres, Raul

    2013-06-01

    We present several procedures to represent molecular electrostatic potential as a graph, based on the pattern of critical points and their neighborhood relations. This representation is used for the molecular electrostatic comparison, which is reduced to a comparison of tree-type graphs. Several methods to compare trees are also presented. The applications of this algorithm to compare and classify molecules through their electrostatic potential are illustrated.

  18. PRECIPITATION OF PLUTONOUS PEROXIDE

    DOEpatents

    Barrick, J.G.; Manion, J.P.

    1961-08-15

    A precipitation process for recovering plutonium values contained in an aqueous solution is described. In the process for precipitating plutonium as plutonous peroxide, hydroxylamine or hydrazine is added to the plutoniumcontaining solution prior to the addition of peroxide to precipitate plutonium. The addition of hydroxylamine or hydrazine increases the amount of plutonium precipitated as plutonous peroxide. (AEC)

  19. Electrostatic atomization: Effect of electrode materials on electrostatic atomizer performance

    NASA Astrophysics Data System (ADS)

    Sankaran, Abhilash; Staszel, Christopher; Kashir, Babak; Perri, Anthony; Mashayek, Farzad; Yarin, Alexander

    2016-11-01

    Electrostatic atomization was studied experimentally with a pointed electrode in a converging nozzle. Experiments were carried out on poorly conductive canola oil where it was observed that electrode material may affect charge transfer. This points at the possible faradaic reactions that can occur at the surfaces of the electrodes. The supply voltage is applied to the sharp electrode and the grounded nozzle body constitutes the counter-electrode. The charge transfer is controlled by the electrochemical reactions on both the electrodes. The electrical performance study of the atomizer issuing a charged oil jet was conducted using three different nozzle body materials - brass, copper and stainless steel. Also, two sharp electrode materials - brass and stainless steel - were tested. The experimental results revealed that both the nozzle body material, as well as the sharp electrode material affected the spray and leak currents. Moreover, the effect of the sharp electrode material is quite significant. This research is supported by NSF Grant 1505276.

  20. Offer/Acceptance Ratio.

    ERIC Educational Resources Information Center

    Collins, Mimi

    1997-01-01

    Explores how human resource professionals, with above average offer/acceptance ratios, streamline their recruitment efforts. Profiles company strategies with internships, internal promotion, cooperative education programs, and how to get candidates to accept offers. Also discusses how to use the offer/acceptance ratio as a measure of program…

  1. Electrostatic analysis of nanoelectromechanical systems

    NASA Astrophysics Data System (ADS)

    Xu, Yang

    We present a multiscale method, seamlessly combining semiclassical, effective-mass Schrodinger (EMS), and tight-binding (TB) theories proposed for electrostatic analysis of silicon nanoelectromechanical systems (NEMS). By using appropriate criteria, we identify the physical models that are accurate in each local region. If the local physical model is semiclassical, the charge density is directly computed by the semiclassical theory. If the local physical model is quantum-mechanical (EMS or TB model), the charge density is calculated by using the theory of local density of states (LDOS). The LDOS is efficiently calculated from Green's function by using Haydock's recursion method where the Green's function is expressed as a continued fraction based on the local Hamiltonian. Once the charge density is determined, a Poisson equation is solved self-consistently to determine the electronic properties. The accuracy and efficiency of the multiscale method are demonstrated by considering several NEMS examples. The multiscale method can be used to compute the effect of surface and interior defects such as vacancies and broken bonds on the performance of microelectromechanical systems (MEMS). By combining multiscale electrostatic analysis with mechanical analysis, we compute the capacitance-voltage and pull-in/pull-out voltages of MEMS switches in the presence of defects in the dielectric oxide layer. Our results indicate that both surface and interior defects can change the pull-in/pull-out voltages significantly. These voltage offsets can lead to an eventual failure of the MEMS switches. The self-consistent TB method is used to investigate carbon nanotube (CNT)-based sensors. We compute the screening effects of semiconducting and metallic single-wall carbon nanotubes (SWNTs) when water molecules and various ions pass through the nanotubes. The trajectories of ions and water molecules are obtained from molecular dynamics (MD) simulations. It is shown that metallic SWNTs have

  2. Microencapsulation and Electrostatic Processing Method

    NASA Technical Reports Server (NTRS)

    Morrison, Dennis R. (Inventor); Mosier, Benjamin (Inventor)

    2000-01-01

    Methods are provided for forming spherical multilamellar microcapsules having alternating hydrophilic and hydrophobic liquid layers, surrounded by flexible, semi-permeable hydrophobic or hydrophilic outer membranes which can be tailored specifically to control the diffusion rate. The methods of the invention rely on low shear mixing and liquid-liquid diffusion process and are particularly well suited for forming microcapsules containing both hydrophilic and hydrophobic drugs. These methods can be carried out in the absence of gravity and do not rely on density-driven phase separation, mechanical mixing or solvent evaporation phases. The methods include the process of forming, washing and filtering microcapsules. In addition, the methods contemplate coating microcapsules with ancillary coatings using an electrostatic field and free fluid electrophoresis of the microcapsules. The microcapsules produced by such methods are particularly useful in the delivery of pharmaceutical compositions.

  3. Large Aperture Electrostatic Dust Detector

    SciTech Connect

    C.H. Skinner, R. Hensley, and A.L Roquemore

    2007-10-09

    Diagnosis and management of dust inventories generated in next-step magnetic fusion devices is necessary for their safe operation. A novel electrostatic dust detector, based on a fine grid of interlocking circuit traces biased to 30 or 50 ν has been developed for the detection of dust particles on remote surfaces in air and vacuum environments. Impinging dust particles create a temporary short circuit and the resulting current pulse is recorded by counting electronics. Up to 90% of the particles are ejected from the grid or vaporized suggesting the device may be useful for controlling dust inventories. We report measurements of the sensitivity of a large area (5x5 cm) detector to microgram quantities of dust particles and review its applications to contemporary tokamaks and ITER.

  4. Review on the modeling of electrostatic MEMS.

    PubMed

    Chuang, Wan-Chun; Lee, Hsin-Li; Chang, Pei-Zen; Hu, Yuh-Chung

    2010-01-01

    Electrostatic-driven microelectromechanical systems devices, in most cases, consist of couplings of such energy domains as electromechanics, optical electricity, thermoelectricity, and electromagnetism. Their nonlinear working state makes their analysis complex and complicated. This article introduces the physical model of pull-in voltage, dynamic characteristic analysis, air damping effect, reliability, numerical modeling method, and application of electrostatic-driven MEMS devices.

  5. Electrostatics experiments with sharp metal points

    NASA Astrophysics Data System (ADS)

    Ivanov, Dragia; Nikolov, Stefan

    2016-11-01

    In this paper we examine the phenomena that arise around an electrically charged sharp metal spike and present numerous experiments that can be used in the teaching of electrostatics. The experiments are quite spectacular and attention-grabbing while being relatively simple and easy to perform in any decently supplied physics education laboratory that is equipped with an electrostatic machine (like a Wimshurst machine).

  6. Preliminary tests of the electrostatic plasma accelerator

    NASA Technical Reports Server (NTRS)

    Aston, G.; Acker, T.

    1990-01-01

    This report describes the results of a program to verify an electrostatic plasma acceleration concept and to identify those parameters most important in optimizing an Electrostatic Plasma Accelerator (EPA) thruster based upon this thrust mechanism. Preliminary performance measurements of thrust, specific impulse and efficiency were obtained using a unique plasma exhaust momentum probe. Reliable EPA thruster operation was achieved using one power supply.

  7. Ionic electrostatic excitations along biological membranes

    NASA Astrophysics Data System (ADS)

    Moradi, Afshin

    2011-02-01

    A theoretical analysis of ionic electrostatic excitations of a charged biological membrane is presented within the framework of the fluid theory for surface ions inside and outside the cell, in conjunction with the Poisson's equation. General expressions of dispersion relations are obtained for electrostatic oscillations of intrinsic cellular with different shapes and symmetries.

  8. Electrostatics with Computer-Interfaced Charge Sensors

    ERIC Educational Resources Information Center

    Morse, Robert A.

    2006-01-01

    Computer interfaced electrostatic charge sensors allow both qualitative and quantitative measurements of electrostatic charge but are quite sensitive to charges accumulating on modern synthetic materials. They need to be used with care so that students can correctly interpret their measurements. This paper describes the operation of the sensors,…

  9. Using Programmable Calculators to Solve Electrostatics Problems.

    ERIC Educational Resources Information Center

    Yerian, Stephen C.; Denker, Dennis A.

    1985-01-01

    Provides a simple routine which allows first-year physics students to use programmable calculators to solve otherwise complex electrostatic problems. These problems involve finding electrostatic potential and electric field on the axis of a uniformly charged ring. Modest programing skills are required of students. (DH)

  10. Electrostatic thin film chemical and biological sensor

    DOEpatents

    Prelas, Mark A.; Ghosh, Tushar K.; Tompson, Jr., Robert V.; Viswanath, Dabir; Loyalka, Sudarshan K.

    2010-01-19

    A chemical and biological agent sensor includes an electrostatic thin film supported by a substrate. The film includes an electrostatic charged surface to attract predetermined biological and chemical agents of interest. A charge collector associated with said electrostatic thin film collects charge associated with surface defects in the electrostatic film induced by the predetermined biological and chemical agents of interest. A preferred sensing system includes a charge based deep level transient spectroscopy system to read out charges from the film and match responses to data sets regarding the agents of interest. A method for sensing biological and chemical agents includes providing a thin sensing film having a predetermined electrostatic charge. The film is exposed to an environment suspected of containing the biological and chemical agents. Quantum surface effects on the film are measured. Biological and/or chemical agents can be detected, identified and quantified based on the measured quantum surface effects.

  11. Electrostatic interaction in atomic force microscopy

    PubMed Central

    Butt, Hans-Jüurgen

    1991-01-01

    In atomic force microscopy, the stylus experiences an electrostatic force when imaging in aqueous medium above a charged surface. This force has been calculated numerically with continuum theory for a silicon nitrite or silicon oxide stylus. For comparison, the Van der Waals force was also calculated. In contrast to the Van der Waals attraction, the electrostatic force is repulsive. At a distance of 0.5 nm the electrostatic force is typically 10-12-10-10 N and thus comparable in strength to the Van der Waals force. The electrostatic force increases with increasing surface charge density and decreases roughly exponentially with distance. It can be reduced by imaging in high salt concentrations. Below surface potentials of ≈50 mV, a simple analytical approximation of the electrostatic force is described. PMID:19431803

  12. Measurement of the cross spectrum of HF electrostatic waves in an auroral plasma

    NASA Astrophysics Data System (ADS)

    Pottelette, R.; Illiano, J. M.

    1983-06-01

    A method for the metrology of space plasmas, based on the reception of electrostatic waves by a pair of small dipole antennas was tested in PORCUPINE project rocket experiments. Both dipoles received signals from the natural electrostatic microfield in the plasma; the cross spectrum of these random signals was measured. Data obtained during a weak auroral activity are presented. Natural electrostatic emissions were observed around the upper hybrid frequency and also around the three-halves harmonic of the electron gyrofrequency. A linear calculation shows that the amplitudes of these emissions are above the thermal noise level of the plasma. To explain the observations, it is necessary to take into account the presence of low-energy precipitating electrons (1 to 20 eV), which are highly anisotropic.

  13. Precipitation Climate Data Records

    NASA Astrophysics Data System (ADS)

    Nelson, B. R.; Prat, O.; Vasquez, L.

    2015-12-01

    Five precipitation CDRs are now or soon will be transitioned to NOAA's CDR program. These include the PERSIANN data set, which is a 30-year record of daily adjusted global precipitation based on retrievals from satellite microwave data using artificial neural networks. The AMSU-A/B/Hydrobundle is an 11-year record of precipitable water, cloud water, ice water, and other variables. CMORPH (the NOAA Climate Prediction Center Morphing Technique) is a 17-year record of daily and sub-daily adjusted global precipitation measured from passive microwave and infrared data at high spatial and temporal resolution. GPCP (the Global Precipitation Climatology Project) is an approximately 30-year record of monthly and pentad adjusted global precipitation and a 17-year record of daily adjusted global precipitation. The NEXRAD Reanalysis is a 10-year record of high resolution NEXRAD radar based adjusted CONUS-wide hourly and daily precipitation. This study provides an assessment of the existing and transitioned long term precipitation CDRs and includes the verification of the five precipitation CDRs using various methods including comparison with in-situ data sets and trend analysis. As all of the precipitation related CDRs are transitioned, long term analyses can be performed. Comparisons at varying scales (hourly, daily and longer) of the precipitation CDRs with in-situ data sets are provided as well as a first look at what could be an ensemble long term precipitation data record.

  14. LIMS user acceptance testing.

    PubMed

    Klein, Corbett S

    2003-01-01

    Laboratory Information Management Systems (LIMS) play a key role in the pharmaceutical industry. Thorough and accurate validation of such systems is critical and is a regulatory requirement. LIMS user acceptance testing is one aspect of this testing and enables the user to make a decision to accept or reject implementation of the system. This paper discusses key elements in facilitating the development and execution of a LIMS User Acceptance Test Plan (UATP).

  15. On Maximum FODO Acceptance

    SciTech Connect

    Batygin, Yuri Konstantinovich

    2014-12-24

    This note illustrates maximum acceptance of FODO quadrupole focusing channel. Acceptance is the largest Floquet ellipse of a matched beam: A = $\\frac{a^2}{β}$$_{max}$ where a is the aperture of the channel and βmax is the largest value of beta-function in the channel. If aperture of the channel is restricted by a circle of radius a, the s-s acceptance is available for particles oscillating at median plane, y=0. Particles outside median plane will occupy smaller phase space area. In x-y plane, cross section of the accepted beam has a shape of ellipse with truncated boundaries.

  16. Electrostatic-free piezoresponse force microscopy

    NASA Astrophysics Data System (ADS)

    Kim, Sungho; Seol, Daehee; Lu, Xiaoli; Alexe, Marin; Kim, Yunseok

    2017-01-01

    Contact and non-contact based atomic force microscopy (AFM) approaches have been extensively utilized to explore various nanoscale surface properties. In most AFM-based measurements, a concurrent electrostatic effect between the AFM tip/cantilever and sample surface can occur. This electrostatic effect often hinders accurate measurements. Thus, it is very important to quantify as well as remove the impact of the electrostatic effect on AFM-based measurements. In this study, we examine the impact of the electrostatic effect on the electromechanical (EM) response in piezoresponse force microscopy as a model AFM mode. We quantitatively studied the effects of increasing the external electric field and reducing the spring constant of a cantilever. Further, we explored ways to minimize the electrostatic effect. The results provide broad guidelines for quantitatively analyzing the EM response as well as, eventually, for obtaining the electrostatic-free EM response. The conclusions can be applied to other AFM-based measurements that are subject to a strong electrostatic effect between the AFM tip/cantilever and sample surface, regardless of contact and non-contact modes.

  17. Intrinsic electrostatic effects in nanostructured ceramics

    SciTech Connect

    Uberuaga, Blas Pedro; Stanek, Chris R; Nerikar, Pankaj V

    2009-01-01

    Using empirical potentials, we have found that electrostatic dipoles can be created at grain boundaries formed from non-polar surfaces of fluorite-structured materials. In particular, the {Sigma}5(310)/[001] symmetric tilt grain boundary reconstructs to break the symmetry in the atomic structure at the boundary, forming the dipole. This dipole results in an abrupt change in electrostatic potential across the boundary. In multilayered ceramics composed of stacks of grain boundaries, the change in electrostatic potential at the boundary results in profound electrostatic effects within the crystalline layers, the nature of which depends on the electrostatic boundary conditions. For open-circuit boundary conditions, layers with either high or low electrostatic potential are formed. By contrast, for short-circuit boundary conditions, electric fields can be created within each layer, the strength of which then depends on the thickness of the layers. These electrostatic effects may have important consequences for the behavior of defects and dopants within these materials and offer the possibility of interesting technological applications.

  18. Electrostatic-free piezoresponse force microscopy

    PubMed Central

    Kim, Sungho; Seol, Daehee; Lu, Xiaoli; Alexe, Marin; Kim, Yunseok

    2017-01-01

    Contact and non-contact based atomic force microscopy (AFM) approaches have been extensively utilized to explore various nanoscale surface properties. In most AFM-based measurements, a concurrent electrostatic effect between the AFM tip/cantilever and sample surface can occur. This electrostatic effect often hinders accurate measurements. Thus, it is very important to quantify as well as remove the impact of the electrostatic effect on AFM-based measurements. In this study, we examine the impact of the electrostatic effect on the electromechanical (EM) response in piezoresponse force microscopy as a model AFM mode. We quantitatively studied the effects of increasing the external electric field and reducing the spring constant of a cantilever. Further, we explored ways to minimize the electrostatic effect. The results provide broad guidelines for quantitatively analyzing the EM response as well as, eventually, for obtaining the electrostatic-free EM response. The conclusions can be applied to other AFM-based measurements that are subject to a strong electrostatic effect between the AFM tip/cantilever and sample surface, regardless of contact and non-contact modes. PMID:28139715

  19. Design and testing of electrostatic aerosol in vitro exposure system (EAVES): An alternative exposure system for particles

    EPA Science Inventory

    Conventional in vitro exposure methods for cultured human lung cells rely on prior suspension of particles in a liquid medium; these have limitations for exposure intensity and may modify the particle composition. Here electrostatic precipitation was used as an effective method f...

  20. DNA/chitosan electrostatic complex.

    PubMed

    Bravo-Anaya, Lourdes Mónica; Soltero, J F Armando; Rinaudo, Marguerite

    2016-07-01

    Up to now, chitosan and DNA have been investigated for gene delivery due to chitosan advantages. It is recognized that chitosan is a biocompatible and biodegradable non-viral vector that does not produce immunological reactions, contrary to viral vectors. Chitosan has also been used and studied for its ability to protect DNA against nuclease degradation and to transfect DNA into several kinds of cells. In this work, high molecular weight DNA is compacted with chitosan. DNA-chitosan complex stoichiometry, net charge, dimensions, conformation and thermal stability are determined and discussed. The influence of external salt and chitosan molecular weight on the stoichiometry is also discussed. The isoelectric point of the complexes was found to be directly related to the protonation degree of chitosan. It is clearly demonstrated that the net charge of DNA-chitosan complex can be expressed in terms of the ratio [NH3(+)]/[P(-)], showing that the electrostatic interactions between DNA and chitosan are the main phenomena taking place in the solution. Compaction of DNA long chain complexed with low molar mass chitosan gives nanoparticles with an average radius around 150nm. Stable nanoparticles are obtained for a partial neutralization of phosphate ionic sites (i.e.: [NH3(+)]/[P(-)] fraction between 0.35 and 0.80).

  1. Electrostatic evaluation of isosteric analogues

    NASA Astrophysics Data System (ADS)

    Sayle, Roger; Nicholls, Anthony

    2006-04-01

    A method is presented for enumerating a large number of isosteric analogues of a ligand from a known protein-ligand complex structure and then rapidly calculating an estimate of their binding energies. This approach takes full advantage of the observed crystal structure, by reusing the atomic co-ordinates determined experimentally for one ligand, to approximate those of similar compounds that have approximately the same shape. By assuming that compounds with similar shapes adopt similar binding poses, and that entropic and protein flexibility effects are approximately constant across such an isosteric series ("the frozen ligand approximation"), it is possible to order their binding affinities relatively accurately. Additionally, the constraint that the atomic coordinates are invariant allows for a dramatic simplification in the Poisson-Boltzmann method used to calculation the electrostatic component of the binding energy. This algorithmic improvement allows for the calculation of tens of thousands of binding energies per second for drug-like molecules, enabling this technique to be used in screening large virtual libraries of isosteric analogues. Most significantly, this procedure is shown to be able to reproduce SAR effects of subtle medicinal chemistry substitutions. Finally, this paper reports the results of the proposed methodology on␣seven model systems; dihydrofolate reductase, Lck␣kinase, ribosome inactivating protein, l-arabinose binding protein, neuraminidase, HIV-1 reverse transcriptase and COX-2.

  2. Electrostatic Stabilization Of Growing Protein Crystals

    NASA Technical Reports Server (NTRS)

    Shlichta, Paul J.

    1991-01-01

    Proposed technique produces large crystals in compact, economical apparatus. Report presents concept for supporting protein crystals during growth in microgravity. Yields crystals larger and more-nearly perfect than those grown on Earth. Combines best features of sandwich-drop and electrostatic-levitation methods of support. Drop of protein solution inserted between pair of glass or plastic plates, as in sandwich-drop-support method. Electrostatically charged ring confines drop laterally and shapes it, as in electrostatic technique. Apparatus also made to accommodate several drops simultaneously between same pair of supporting plates. Drops can be inserted and crystals removed through ducts in plates.

  3. Electrostatic interactions at the microscale modulate dynamics and distribution of lipids in bilayers.

    PubMed

    Mangiarotti, Agustín; Wilke, Natalia

    2017-01-18

    For decades, it has been assumed that electrostatic long-range (micron distances) repulsions in lipid bilayers are negligible due to screening from the aqueous milieu. This concept, mostly derived from theoretical calculations, is broadly accepted in the biophysical community. Here we present experimental evidence showing that domain-domain electrostatic repulsions in charged and also in neutral lipid bilayers regulate the diffusion, in-plane structuring and merging of lipid domains in the micron range. All the experiments were performed on both, lipid monolayers and bilayers, and the remarkable similarity in the results found in bilayers compared to monolayers led us to propose that inter-domain repulsions occur mainly within the plane of the membrane. Finally, our results indicate that electrostatic interactions between the species inserted in a cell membrane are not negligible, not only at nanometric but also at larger distances, suggesting another manner for regulating the membrane properties.

  4. The Electrocardiogram as an Example of Electrostatics

    ERIC Educational Resources Information Center

    Hobbie, Russell K.

    1973-01-01

    Develops a simplified electrostatic model of the heart with conduction within the torso neglected to relate electrocardiogram patterns to the charge distribution within the myocardium. Suggests its application to explanation of Coulomb's law in general physics. (CC)

  5. Nonlinear electrostatic drift Kelvin-Helmholtz instability

    NASA Technical Reports Server (NTRS)

    Sharma, Avadhesh C.; Srivastava, Krishna M.

    1993-01-01

    Nonlinear analysis of electrostatic drift Kelvin-Helmholtz instability is performed. It is shown that the analysis leads to the propagation of the weakly nonlinear dispersive waves, and the nonlinear behavior is governed by the nonlinear Burger's equation.

  6. NEW APPROACHES: A novel Kelvin Electrostatic Generator

    NASA Astrophysics Data System (ADS)

    Hill, M.; Jacobs, D. J.

    1997-01-01

    A form of the Kelvin Electrostatic Generator, made from readily available components, is described and an explanation given of how it works. The device described can generate 10 - 12 mm long sparks in air.

  7. Electrostatic discharge control for STDN stations

    NASA Technical Reports Server (NTRS)

    Mckiernan, J.

    1983-01-01

    This manual defines the requirements and control methods necessary to control the effect of electrostatic discharges that damage or destroy electronic equipment components. Test procedures for measuring the effectiveness of the control are included.

  8. Electrostatic processing of polymers and polymer composites

    NASA Astrophysics Data System (ADS)

    Sanders, Elliot Howard

    2005-11-01

    Polymers are a broad class of molecules whose use in modern life is undeniable ranging from automobile parts to pharmaceuticals. One method applicable to polymer material production is known as electrostatic processing which includes electrospraying, used to produce films or microparticles, and electrospinning, which can be used to produce fibers or non-woven materials. Electrostatic processing typically results in products with droplet or fiber diameters on the micron or nanometer scale. We have sought to develop novel polymeric materials and composites using electrostatic processing. The end uses of these materials were diverse, and included controlled release of drugs, microencapsulation of proteins and enzymes, provision of molecular cues for directed cell growth, hydronium ion transport, and electrically conductive polymer and catalytically active composites. We have successfully demonstrated that electrostatic processing can be used to produce a wide variety of functionally active polymer based materials with significant commercial, medical, and scientific potential.

  9. Electrostatic Beneficiation of Lunar Simulant

    NASA Technical Reports Server (NTRS)

    Trigwell, Steve; Captain, James; Captain, Janine; Arens, Ellen; Quinn, Jacqueline; Calle, Carlos

    2006-01-01

    Electrostatic beneficiation of lunar regolith is a method allowing refinement of specific minerals in the material for processing on the moon. The use of tribocharging the regolith prior to separation was investigated on the lunar simulant MLS-I by passing the dust through static mixers constructed from different materials; aluminum, copper, stainless steel, and polytetrafluoroethylene (PTFE). The amount of charge acquired by the simulant was dependent upon the difference in the work function of the dust and the charging material. XPS and SEM were used to characterize the simulant after it was sieved into five size fractions (> 100 pm, 75-100 pm, 50- 75 pm, 50-25 pm, and < 25 pm), where very little difference in surface composition was observed between the sizes. Samples of the smallest (< 25 pm) and largest (> 100 pm) size fractions were beneficiated through a charge separator using the aluminum (charged the simulant negatively) and PTFE (charged positively) mixers. The mass fractions of the separated simulant revealed that for the larger particle size, significant unipolar charging was observed for both mixers, whereas for the smaller particle sizes, more bipolar charging was observed, probably due to the finer simulant adhering to the inside of the mixers shielding the dust from the charging material. Subsequent XPS analysis of the beneficiated fractions showed the larger particle size fraction having some species differentiation, but very little difference for the smaller.size. Although MLS-1 was made to have similar chemistry to actual lunar dust, its mineralogy is quite different. On-going experiments are using NASA JSC-1 lunar simulant. A vacuum chamber has been constructed, and future experiments are planned in a simulated lunar environment.

  10. Miniature Bipolar Electrostatic Ion Thruster

    NASA Technical Reports Server (NTRS)

    Hartley, Frank T.

    2006-01-01

    The figure presents a concept of a bipolar miniature electrostatic ion thruster for maneuvering a small spacecraft. The ionization device in the proposed thruster would be a 0.1-micron-thick dielectric membrane with metal electrodes on both sides. Small conical holes would be micromachined through the membrane and electrodes. An electric potential of the order of a volt applied between the membrane electrodes would give rise to an electric field of the order of several mega-volts per meter in the submicron gap between the electrodes. An electric field of this magnitude would be sufficient to ionize all the molecules that enter the holes. In a thruster-based on this concept, one or more propellant gases would be introduced into such a membrane ionizer. Unlike in larger prior ion thrusters, all of the propellant molecules would be ionized. This thruster would be capable of bipolar operation. There would be two accelerator grids - one located forward and one located aft of the membrane ionizer. In one mode of operation, which one could denote the forward mode, positive ions leaving the ionizer on the backside would be accelerated to high momentum by an electric field between the ionizer and an accelerator grid. Electrons leaving the ionizer on the front side would be ejected into free space by a smaller accelerating field. The equality of the ion and electron currents would eliminate the need for an additional electron- or ion-emitting device to keep the spacecraft charge-neutral. In another mode of operation, which could denote the reverse mode, the polarities of the voltages applied to the accelerator grids and to the electrodes of the membrane ionizer would be the reverse of those of the forward mode. The reversal of electric fields would cause the ion and electrons to be ejected in the reverse of their forward mode directions, thereby giving rise to thrust in the direction opposite that of the forward mode.

  11. Electrostatic camera system functional design study

    NASA Technical Reports Server (NTRS)

    Botticelli, R. A.; Cook, F. J.; Moore, R. F.

    1972-01-01

    A functional design study for an electrostatic camera system for application to planetary missions is presented. The electrostatic camera can produce and store a large number of pictures and provide for transmission of the stored information at arbitrary times after exposure. Preliminary configuration drawings and circuit diagrams for the system are illustrated. The camera system's size, weight, power consumption, and performance are characterized. Tradeoffs between system weight, power, and storage capacity are identified.

  12. Miniature Electrostatic Ion Thruster With Magnet

    NASA Technical Reports Server (NTRS)

    Hartley, Frank T.

    2006-01-01

    A miniature electrostatic ion thruster is proposed that, with one exception, would be based on the same principles as those of the device described in the previous article, "Miniature Bipolar Electrostatic Ion Thruster". The exceptional feature of this thruster would be that, in addition to using electric fields for linear acceleration of ions and electrons, it would use a magnetic field to rotationally accelerate slow electrons into the ion stream to neutralize the ions.

  13. Electrostatic Levitation Furnace for the ISS

    NASA Technical Reports Server (NTRS)

    Murakami, Keiji; Koshikawa, Naokiyo; Shibasaki, Kohichi; Ishikawa, Takehiko; Okada, Junpei; Takada, Tetsuya; Arai, Tatsuya; Fujino, Naoki; Yamaura, Yukiko

    2012-01-01

    JAXA (Japan Aerospace Exploration Agency) has just started the development of Electrostatic Levitation Furnace to be launched in 2014 for the ISS. This furnace can control the sample position with electrostatic force and heat it above 2000 degree Celsius using semiconductor laser from four different directions. The announcement of Opportunity will be issued soon for this furnace. In this paper, we will show the specifications of this furnace and also the development schedule

  14. High-energy capacitance electrostatic micromotors

    NASA Astrophysics Data System (ADS)

    Baginsky, I. L.; Kostsov, E. G.

    2003-03-01

    The design and parameters of a new electrostatic micromotor with high energy output are described. The motor is created by means of microelectronic technology. Its operation is based on the electromechanic energy conversion during the electrostatic rolling of the metallic films (petals) on the ferroelectric film surface. The mathematical simulation of the main characteristics of the rolling process is carried out. The experimentally measured parameters of the petal step micromotors are shown. The motor operation and its efficiency are investigated.

  15. An improved proximity force approximation for electrostatics

    SciTech Connect

    Fosco, Cesar D.; Lombardo, Fernando C.; Mazzitelli, Francisco D.

    2012-08-15

    A quite straightforward approximation for the electrostatic interaction between two perfectly conducting surfaces suggests itself when the distance between them is much smaller than the characteristic lengths associated with their shapes. Indeed, in the so called 'proximity force approximation' the electrostatic force is evaluated by first dividing each surface into a set of small flat patches, and then adding up the forces due two opposite pairs, the contributions of which are approximated as due to pairs of parallel planes. This approximation has been widely and successfully applied in different contexts, ranging from nuclear physics to Casimir effect calculations. We present here an improvement on this approximation, based on a derivative expansion for the electrostatic energy contained between the surfaces. The results obtained could be useful for discussing the geometric dependence of the electrostatic force, and also as a convenient benchmark for numerical analyses of the tip-sample electrostatic interaction in atomic force microscopes. - Highlights: Black-Right-Pointing-Pointer The proximity force approximation (PFA) has been widely used in different areas. Black-Right-Pointing-Pointer The PFA can be improved using a derivative expansion in the shape of the surfaces. Black-Right-Pointing-Pointer We use the improved PFA to compute electrostatic forces between conductors. Black-Right-Pointing-Pointer The results can be used as an analytic benchmark for numerical calculations in AFM. Black-Right-Pointing-Pointer Insight is provided for people who use the PFA to compute nuclear and Casimir forces.

  16. Optics Elements for Modeling Electrostatic Lenses and Accelerator Components: III. Electrostatic Deflectors

    SciTech Connect

    Brown, T.A.; Gillespie, G.H.

    1999-10-21

    Ion-beam optics models for simulating electrostatic prisms (deflectors) of different geometries have been developed for the computer code TRACE 3-D. TRACE 3-D is an envelope (matrix) code, which includes a linear space charge model, that was originally developed to model bunched beams in magnetic transport systems and radiofrequency (RF) accelerators. Several new optical models for a number of electrostatic lenses and accelerator columns have been developed recently that allow the code to be used for modeling beamlines and accelerators with electrostatic components. The new models include a number of options for: (1) Einzel lenses, (2) accelerator columns, (3) electrostatic prisms, and (4) electrostatic quadrupoles. A prescription for setting up the initial beam appropriate to modeling 2-D (continuous) beams has also been developed. The models for electrostatic prisms are described in this paper. The electrostatic prism model options allow the modeling of cylindrical, spherical, and toroidal electrostatic deflectors. The application of these models in the development of ion-beam transport systems is illustrated through the modeling of a spherical electrostatic analyzer as a component of the new low energy beamline at CAMS.

  17. Newbery Medal Acceptance.

    ERIC Educational Resources Information Center

    Freedman, Russell

    1988-01-01

    Presents the Newbery Medal acceptance speech of Russell Freedman, writer of children's nonfiction. Discusses the place of nonfiction in the world of children's literature, the evolution of children's biographies, and the author's work on "Lincoln." (ARH)

  18. Retinal Photoisomerization in Rhodopsin: Electrostatic and Steric Catalysis

    SciTech Connect

    Tomasello, Gaia; Altoe, Piero; Stenta, Marco; Olaso-Gonzalez, Gloria; Garavelli, Marco; Orlandi, Giorgio

    2007-12-26

    Excited state QM(CASPT2//CASSCF)/MM(GAFF) calculations, by our recently developed code COBRAMM (Computations at Bologna Relating Ab-initio and Molecular Mechanic Methods), were carried out in rhodopsin to investigate on the steric and electrostatic effects in retinal photoisomerization catalysis due to the {beta}-ionone ring and glutammate 181 (GLU 181), respectively. The excited state photoisomerization channel has been mapped and a new christallographyc structure (2.2 Aa resolution) has been used for this purpose. Two different set-ups have been used to evaluate the electrostatic effects of GLU 181 (which is very close to the central double bond of the chromophore): the first with a neutral GLU 181 (as commonly accepted), the second with a negatively charged (i.e. deprotonated) GLU 181 (as very recent experimental findings seem to suggest). On the other hand, {beta}-ionone ring steric effects were evaluated by calculating the photoisomerization path of a modified chromophore, where the ring double bond has been saturated. Spectroscopic properties were calculated and compared with the available experimental data.

  19. Global Precipitation Measurement

    NASA Technical Reports Server (NTRS)

    Hou, Arthur Y.; Skofronick-Jackson, Gail; Kummerow, Christian D.; Shepherd, James Marshall

    2008-01-01

    This chapter begins with a brief history and background of microwave precipitation sensors, with a discussion of the sensitivity of both passive and active instruments, to trace the evolution of satellite-based rainfall techniques from an era of inference to an era of physical measurement. Next, the highly successful Tropical Rainfall Measuring Mission will be described, followed by the goals and plans for the Global Precipitation Measurement (GPM) Mission and the status of precipitation retrieval algorithm development. The chapter concludes with a summary of the need for space-based precipitation measurement, current technological capabilities, near-term algorithm advancements and anticipated new sciences and societal benefits in the GPM era.

  20. Electrostatic effects on hyaluronic acid configuration

    NASA Astrophysics Data System (ADS)

    Berezney, John; Saleh, Omar

    2015-03-01

    In systems of polyelectrolytes, such as solutions of charged biopolymers, the electrostatic repulsion between charged monomers plays a dominant role in determining the molecular conformation. Altering the ionic strength of the solvent thus affects the structure of such a polymer. Capturing this electrostatically-driven structural dependence is important for understanding many biological systems. Here, we use single molecule manipulation experiments to collect force-extension behavior on hyaluronic acid (HA), a polyanion which is a major component of the extracellular matrix in all vertebrates. By measuring HA elasticity in a variety of salt conditions, we are able to directly assess the contribution of electrostatics to the chain's self-avoidance and local stiffness. Similar to recent results from our group on single-stranded nucleic acids, our data indicate that HA behaves as a swollen chain of electrostatic blobs, with blob size proportional to the solution Debye length. Our data indicate that the chain structure within the blob is not worm-like, likely due to long-range electrostatic interactions. We discuss potential models of this effect.

  1. Accepting space radiation risks.

    PubMed

    Schimmerling, Walter

    2010-08-01

    The human exploration of space inevitably involves exposure to radiation. Associated with this exposure are multiple risks, i.e., probabilities that certain aspects of an astronaut's health or performance will be degraded. The management of these risks requires that such probabilities be accurately predicted, that the actual exposures be verified, and that comprehensive records be maintained. Implicit in these actions is the fact that, at some point, a decision has been made to accept a certain level of risk. This paper examines ethical and practical considerations involved in arriving at a determination that risks are acceptable, roles that the parties involved may play, and obligations arising out of reliance on the informed consent paradigm seen as the basis for ethical radiation risk acceptance in space.

  2. PRECIPITATION OF PROTACTINIUM

    DOEpatents

    Moore, R.L.

    1958-07-15

    An lmprovement in the separation of protactinium from aqueous nitric acid solutions is described. 1t covers the use of lead dioxide and tin dioxide as carrier precipitates for the protactinium. In carrying out the process, divalent lead or divalent tin is addcd to the solution and oxidized, causing formation of a carrier precipitate of lead dioxide or stannic oxide, respectively.

  3. Arbitrary order permanent Cartesian multipolar electrostatic interactions

    NASA Astrophysics Data System (ADS)

    Boateng, H. A.; Todorov, I. T.

    2015-01-01

    Recently, there has been a concerted effort to implement advanced classical potential energy surfaces by adding higher order multipoles to fixed point charge electrostatics in a bid to increase the accuracy of simulations of condensed phase systems. One major hurdle is the unwieldy nature of the expressions which in part has limited developers mostly to including only dipoles and quadrupoles. In this paper, we present a generalization of the Cartesian formulation of electrostatic multipolar interactions that enables the specification of an arbitrary order of multipoles. Specifically, we derive formulas for arbitrary order implementation of the particle mesh Ewald method and give a closed form formula for the stress tensor in the reciprocal space. In addition, we provide recurrence relations for common electrostatic potentials employed in molecular simulations, which allows for the generalization to arbitrary order and guarantees a computational cost that scales as O(p3) for Cartesian multipole interactions of order p.

  4. Using electrostatic modelling to study cone discharges

    NASA Astrophysics Data System (ADS)

    Azizi, W.

    2015-10-01

    Cone discharges, also known as bulking brush discharges, can arise when charged insulating powder accumulates in a heap in silos. They can be an effective ignition source to relatively ignition sensitive powders and therefore represent a possible electrostatic hazard. The current international guidance on control of electrostatic hazards (IEC/TS 60079-32-1 [1]), endorses the usage of electrostatic modelling to estimate the electric field above the powder heap. “Such model calculations should be based on the charge to mass ratio, bulk density and filling rate of the powder, the relative permittivity and resistivity of the bulked powder as well as the silo geometry.” This study shows a practical demonstration of this modelling technique. It also examines whether the shape of the heap affects the strength of the electric field above the powder heap, and thus the likelihood of cone discharges from occurring.

  5. Catalyzed precipitation in aluminum

    NASA Astrophysics Data System (ADS)

    Mitlin, David

    The work reported in Chapter 1 concerned the influence of Si on the precipitation of theta' (metastable Al2Cu) during the isothermal aging of Al-2Cu-1Si (wt. %). The binary alloys Al-2Cu and Al-1Si were studied for comparison. Only two precipitate phases were detected: pure Si in Al-Si and Al-Cu-Si, and theta' (metastable Al 2Cu) in Al-Cu and Al-Cu-Si. On aging the ternary, Si precipitates first, and provides heterogeneous sites to nucleate theta'. As a consequence, the density of theta' precipitates in Al-Cu-Si is much higher than in the binary Al-Cu. Also, the theta ' precipitates in the ternary alloy have lower aspect ratio (at given particle size) and lose coherence on their broad faces at a slower rate. The principal focus of Chapter 2 is to explain precipitation in Al-lat.%Si-lat%Ge. The microstructure is characterized using conventional and high resolution transmission electron microscopy, as well as energy dispersive X-ray spectroscopy. The first precipitates to come out of solid solution have a cube-cube orientation relationship with the matrix. High resolution TEM demonstrated that all the precipitates start out, and remain multiply twinned throughout the aging treatment. There is a variation in the stoichiometry of the precipitates, with the mean composition being Si-44.5at%Ge. It is also shown that in Al-Si-Ge it is not possible to achieve satisfactory hardness through a conventional heat treatment. This result is explained in terms of sluggish precipitation of the diamond-cubic Si-Ge phase coupled with particle coarsening. The purpose of Chapters 3 and 4 is to explain these properties in terms of the role that the Si-Ge additions have on modifying the conventional Al-Cu aging sequence. In both AlCu and AlCuSiGe the room temperature microstructure consists of both GP zones and theta″ precipitates. Upon aging at 190°C Al-Cu displays the well known precipitation sequence; the slow dissolution of GP zones and theta″ and the gradual formation of theta

  6. Electrostatic patch potentials in Casimir force measurements

    NASA Astrophysics Data System (ADS)

    Garrett, Joseph; Somers, David; Munday, Jeremy

    2015-03-01

    Measurements of the Casimir force require the elimination of the electrostatic force between interacting surfaces. The force can be minimized by applying a potential to one of the two surfaces. However, electrostatic patch potentials remain and contribute an additional force which can obscure the Casimir force signal. We will discuss recent measurements of patch potentials made with Heterodyne Amplitude-Modulated Kelvin Probe Force Microscopy that suggest patches could be responsible for >1% of the signal in some Casimir force measurements, and thus make the distinction between different theoretical models of the Casimir force (e.g. a Drude-model or a plasma-model for the dielectric response) difficult to discern.

  7. Electrostatic supersolitons in three-species plasmas

    SciTech Connect

    Verheest, Frank; Hellberg, Manfred A.; Kourakis, Ioannis

    2013-01-15

    Superficially, electrostatic potential profiles of supersolitons look like those of traditional solitons. However, their electric field profiles are markedly different, having additional extrema on the wings of the standard bipolar structure. This new concept was recently pointed out in the literature for a plasma model with five species. Here, it is shown that electrostatic supersolitons are not an artefact of exotic, complicated plasma models, but can exist even in three-species plasmas and are likely to occur in space plasmas. Further, a methodology is given to delineate their existence domains in a systematic fashion by determining the specific limiting factors.

  8. Kelvin transformation and inverse multipoles in electrostatics

    NASA Astrophysics Data System (ADS)

    Amaral, R. L. P. G.; Ventura, O. S.; Lemos, N. A.

    2017-03-01

    The inversion in the sphere or Kelvin transformation, which exchanges the radial coordinate for its inverse, is used as a guide to relate distinct electrostatic problems with dual features. The exact solution of some nontrivial problems are obtained through the mapping from simple highly symmetric systems. In particular, the concept of multipole expansion is revisited from a point of view opposed to the usual one: the sources are distributed in a region far from the origin while the electrostatic potential is described at points close to it.

  9. Fabrication of Electrostatically Actuated Microshutters Arrays

    NASA Technical Reports Server (NTRS)

    Oh, L.; Li, M.; Kelly, D.; Kutyrev, A.; Moseley, S.

    2016-01-01

    A new fabrication process has been developed to actuate microshutter arrays (MSA) electrostatically at NASA Goddard Space Flight Center. The microshutters, made with silicon nitride membranes with a pixel size of 100 x 200 sq microns, rotate on torsion bars. The microshutters are actuated, latched, and addressed electrostatically by applying voltages on the electrodes the front and back sides of the microshutters. The atomic layer deposition (ALD) of aluminum oxide was used to insulate electrodes on the back side of walls; the insulation can withstand over 100 V. The ALD aluminum oxide is dry etched, and then the microshutters are released in vapor HF.

  10. Inherently tunable electrostatic assembly of membrane proteins.

    PubMed

    Liang, Hongjun; Whited, Gregg; Nguyen, Chi; Okerlund, Adam; Stucky, Galen D

    2008-01-01

    Membrane proteins are a class of nanoscopic entities that control the matter, energy, and information transport across cellular boundaries. Electrostatic interactions are shown to direct the rapid co-assembly of proteorhodopsin (PR) and lipids into long-range crystalline arrays. The roles of inherent charge variations on lipid membranes and PR variants with different compositions are examined by tuning recombinant PR variants with different extramembrane domain sizes and charged amino acid substitutions, lipid membrane compositions, and lipid-to-PR stoichiometric ratios. Rational control of this predominantly electrostatic assembly for PR crystallization is demonstrated, and the same principles should be applicable to the assembly and crystallization of other integral membrane proteins.

  11. Dr. Jan Rogers with Electrostatic Levitator

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Dr. Jan Rogers, project scientist for the Electrostatic Levitator (ESL) at NASA's Marshall Space Flight Center(MSFC). The ESL uses static electricity to suspend an obejct (about 2-3 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contacting the container or any instruments, conditions that would alter the readings. The Electrostatic Levitator is one of several tools used in NASA's microgravity materials sciences program.

  12. Why was Relativity Accepted?

    NASA Astrophysics Data System (ADS)

    Brush, S. G.

    Historians of science have published many studies of the reception of Einstein's special and general theories of relativity. Based on a review of these studies, and my own research on the role of the light-bending prediction in the reception of general relativity, I discuss the role of three kinds of reasons for accepting relativity (1) empirical predictions and explanations; (2) social-psychological factors; and (3) aesthetic-mathematical factors. According to the historical studies, acceptance was a three-stage process. First, a few leading scientists adopted the special theory for aesthetic-mathematical reasons. In the second stage, their enthusiastic advocacy persuaded other scientists to work on the theory and apply it to problems currently of interest in atomic physics. The special theory was accepted by many German physicists by 1910 and had begun to attract some interest in other countries. In the third stage, the confirmation of Einstein's light-bending prediction attracted much public attention and forced all physicists to take the general theory of relativity seriously. In addition to light-bending, the explanation of the advance of Mercury's perihelion was considered strong evidence by theoretical physicists. The American astronomers who conducted successful tests of general relativity became defenders of the theory. There is little evidence that relativity was `socially constructed' but its initial acceptance was facilitated by the prestige and resources of its advocates.

  13. UGV acceptance testing

    NASA Astrophysics Data System (ADS)

    Kramer, Jeffrey A.; Murphy, Robin R.

    2006-05-01

    With over 100 models of unmanned vehicles now available for military and civilian safety, security or rescue applications, it is important to for agencies to establish acceptance testing. However, there appears to be no general guidelines for what constitutes a reasonable acceptance test. This paper describes i) a preliminary method for acceptance testing by a customer of the mechanical and electrical components of an unmanned ground vehicle system, ii) how it has been applied to a man-packable micro-robot, and iii) discusses the value of testing both to ensure that the customer has a workable system and to improve design. The test method automated the operation of the robot to repeatedly exercise all aspects and combinations of components on the robot for 6 hours. The acceptance testing process uncovered many failures consistent with those shown to occur in the field, showing that testing by the user does predict failures. The process also demonstrated that the testing by the manufacturer can provide important design data that can be used to identify, diagnose, and prevent long-term problems. Also, the structured testing environment showed that sensor systems can be used to predict errors and changes in performance, as well as uncovering unmodeled behavior in subsystems.

  14. Approaches to acceptable risk

    SciTech Connect

    Whipple, C.

    1997-04-30

    Several alternative approaches to address the question {open_quotes}How safe is safe enough?{close_quotes} are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made.

  15. Precipitation interpolation in mountainous areas

    NASA Astrophysics Data System (ADS)

    Kolberg, Sjur

    2015-04-01

    Different precipitation interpolation techniques as well as external drift covariates are tested and compared in a 26000 km2 mountainous area in Norway, using daily data from 60 stations. The main method of assessment is cross-validation. Annual precipitation in the area varies from below 500 mm to more than 2000 mm. The data were corrected for wind-driven undercatch according to operational standards. While temporal evaluation produce seemingly acceptable at-station correlation values (on average around 0.6), the average daily spatial correlation is less than 0.1. Penalising also bias, Nash-Sutcliffe R2 values are negative for spatial correspondence, and around 0.15 for temporal. Despite largely violated assumptions, plain Kriging produces better results than simple inverse distance weighting. More surprisingly, the presumably 'worst-case' benchmark of no interpolation at all, simply averaging all 60 stations for each day, actually outperformed the standard interpolation techniques. For logistic reasons, high altitudes are under-represented in the gauge network. The possible effect of this was investigated by a) fitting a precipitation lapse rate as an external drift, and b) applying a linear model of orographic enhancement (Smith and Barstad, 2004). These techniques improved the results only marginally. The gauge density in the region is one for each 433 km2; higher than the overall density of the Norwegian national network. Admittedly the cross-validation technique reduces the gauge density, still the results suggest that we are far from able to provide hydrological models with adequate data for the main driving force.

  16. Overview of the US EPA (Environmental Protection Agency) electrostatic particulate research and development program

    SciTech Connect

    Plaks, N.

    1984-11-01

    The U.S. EPA's particulate research and development program, divided between an in-house laboratory effort and extramural work at various research institutes, makes use of electrostatics in most of the work associated with stack or ducted emissions. Research facilities which offer a large degree of flexibility and capability are described. Significant work currently underway, making use of electrostatics, includes: (1) smooth large-diameter discharge electrodes (9-10 mm), that have been evaluated in 1/3- and 10-MW pilot units; (2) the multistage electrostatic precipitator (ESP), consisting of several two-stage ESPs in series, each using cold-pipe prechargers and collectors with large diameter electrodes; (3) the E-SOX process, combining the multistage ESP with a spray dryer in an existing ESP, for simultaneous SO2 and fly ash removal (including injections of soda ash and lime slurry droplets); and (4) electrostatically augmented fabric filtration with fly ash (including spray drying by-product material).

  17. Deppdb--DNA electrostatic potential properties database: electrostatic properties of genome DNA.

    PubMed

    Osypov, Alexander A; Krutinin, Gleb G; Kamzolova, Svetlana G

    2010-06-01

    The electrostatic properties of genome DNA influence its interactions with different proteins, in particular, the regulation of transcription by RNA-polymerases. DEPPDB--DNA Electrostatic Potential Properties Database--was developed to hold and provide all available information on the electrostatic properties of genome DNA combined with its sequence and annotation of biological and structural properties of genome elements and whole genomes. Genomes in DEPPDB are organized on a taxonomical basis. Currently, the database contains all the completely sequenced bacterial and viral genomes according to NCBI RefSeq. General properties of the genome DNA electrostatic potential profile and principles of its formation are revealed. This potential correlates with the GC content but does not correspond to it exactly and strongly depends on both the sequence arrangement and its context (flanking regions). Analysis of the promoter regions for bacterial and viral RNA polymerases revealed a correspondence between the scale of these proteins' physical properties and electrostatic profile patterns. We also discovered a direct correlation between the potential value and the binding frequency of RNA polymerase to DNA, supporting the idea of the role of electrostatics in these interactions. This matches a pronounced tendency of the promoter regions to possess higher values of the electrostatic potential.

  18. DEPPDB - DNA electrostatic potential properties database. Electrostatic properties of genome DNA elements.

    PubMed

    Osypov, Alexander A; Krutinin, Gleb G; Krutinina, Eugenia A; Kamzolova, Svetlana G

    2012-04-01

    Electrostatic properties of genome DNA are important to its interactions with different proteins, in particular, related to transcription. DEPPDB - DNA Electrostatic Potential (and other Physical) Properties Database - provides information on the electrostatic and other physical properties of genome DNA combined with its sequence and annotation of biological and structural properties of genomes and their elements. Genomes are organized on taxonomical basis, supporting comparative and evolutionary studies. Currently, DEPPDB contains all completely sequenced bacterial, viral, mitochondrial, and plastids genomes according to the NCBI RefSeq, and some model eukaryotic genomes. Data for promoters, regulation sites, binding proteins, etc., are incorporated from established DBs and literature. The database is complemented by analytical tools. User sequences calculations are available. Case studies discovered electrostatics complementing DNA bending in E.coli plasmid BNT2 promoter functioning, possibly affecting host-environment metabolic switch. Transcription factors binding sites gravitate to high potential regions, confirming the electrostatics universal importance in protein-DNA interactions beyond the classical promoter-RNA polymerase recognition and regulation. Other genome elements, such as terminators, also show electrostatic peculiarities. Most intriguing are gene starts, exhibiting taxonomic correlations. The necessity of the genome electrostatic properties studies is discussed.

  19. Investigation of Electrostatic Charge in Hose Lines

    DTIC Science & Technology

    2006-10-01

    storage tanks and, thereby, impose hazardous electrical energy concentrations sufficient to cause incendive arc discharges. This hazard problem... dissipater additives with the objective of quantifying and minimizing electrostatic charging in flexible fuel transport hoses. 0 1 2 3 4 5 6 7 8

  20. Electrostatic 'bounce' instability in a magnetotail configuration

    SciTech Connect

    Fruit, G.; Louarn, P.; Tur, A.

    2013-02-15

    To understand the possible destabilization of two-dimensional current sheets, a kinetic model is proposed to describe the resonant interaction between electrostatic modes and trapped particles that bounce within the sheet. This work follows the initial investigation by Tur et al.[Phys. Plasmas 17, 102905 (2010)] that is revised and extended. Using a quasi-parabolic equilibrium state, the linearized gyro-kinetic Vlasov equation is solved for electrostatic fluctuations with period of the order of the electron bounce period. Using an appropriated Fourier expansion of the particle motion along the magnetic field, the complete time integration of the non-local perturbed distribution functions is performed. The dispersion relation for electrostatic modes is then obtained through the quasineutrality condition. It is found that strongly unstable electrostatic modes may develop provided that the current sheet is moderately stretched and, more important, that the proportion of passing particle remains small (less than typically 10%). This strong but finely tuned instability may offer opportunities to explain features of magnetospheric substorms.

  1. Electrostatics of a Family of Conducting Toroids

    ERIC Educational Resources Information Center

    Lekner, John

    2009-01-01

    An exact solution is found for the electrostatic potential of a family of conducting charged toroids. The toroids are characterized by two lengths "a" and "b", with "a" greater than or equal to "2b". They are closed, with no hole in the "doughnut". The results are obtained by considering the potential of two equal charges, displaced from the…

  2. Electrostatic Enhancement of Coagulation in Protoplanetary Nebulae

    NASA Technical Reports Server (NTRS)

    Marshall, J.; Cuzzi, J.

    2001-01-01

    Microgravity experiments suggest that electrostatic forces (overwhelmed by normal Earth gravity) could greatly enhance cohesive strength of preplanetary aggregates. Cohesive forces may be 103 times larger than those for van der Waals adhesion. Additional information is contained in the original extended abstract.

  3. Electrostatic sampling of trace DNA from clothing.

    PubMed

    Zieger, Martin; Defaux, Priscille Merciani; Utz, Silvia

    2016-05-01

    During acts of physical aggression, offenders frequently come into contact with clothes of the victim, thereby leaving traces of DNA-bearing biological material on the garments. Since tape-lifting and swabbing, the currently established methods for non-destructive trace DNA sampling from clothing, both have their shortcomings in collection efficiency and handling, we thought about a new collection method for these challenging samples. Testing two readily available electrostatic devices for their potential to sample biological material from garments made of different fabrics, we found one of them, the electrostatic dust print lifter (DPL), to perform comparable to well-established sampling with wet cotton swabs. In simulated aggression scenarios, we had the same success rate for the establishment of single aggressor profiles, suitable for database submission, with both the DPL and wet swabbing. However, we lost a substantial amount of information with electrostatic sampling, since almost no mixed aggressor-victim profiles suitable for database entry could be established, compared to conventional swabbing. This study serves as a proof of principle for electrostatic DNA sampling from items of clothing. The technique still requires optimization before it might be used in real casework. But we are confident that in the future it could be an efficient and convenient contribution to the toolbox of forensic practitioners.

  4. The Electrostatic Environments of Mars: Atmospheric Discharges

    NASA Technical Reports Server (NTRS)

    Calle, Carlos I.; Mackey, Paul J.; Johansen, Michael R.; Hogue, Michael D.; Phillips, James, III; Cox, Rachel E.

    2016-01-01

    The electrostatic environment on Mars is controlled by its ever present atmospheric dust. Dust devils and dust storms tribocharge this dust. Theoretical studies predict that lightning and/or glow discharges should be present on Mars, but none have been directly observed. Experiments are planned to shed light on this issue.

  5. Electrostatic transfer of epitaxial graphene to glass.

    SciTech Connect

    Ohta, Taisuke; Pan, Wei; Howell, Stephen Wayne; Biedermann, Laura Butler; Beechem Iii, Thomas Edwin; Ross, Anthony Joseph, III

    2010-12-01

    We report on a scalable electrostatic process to transfer epitaxial graphene to arbitrary glass substrates, including Pyrex and Zerodur. This transfer process could enable wafer-level integration of graphene with structured and electronically-active substrates such as MEMS and CMOS. We will describe the electrostatic transfer method and will compare the properties of the transferred graphene with nominally-equivalent 'as-grown' epitaxial graphene on SiC. The electronic properties of the graphene will be measured using magnetoresistive, four-probe, and graphene field effect transistor geometries [1]. To begin, high-quality epitaxial graphene (mobility 14,000 cm2/Vs and domains >100 {micro}m2) is grown on SiC in an argon-mediated environment [2,3]. The electrostatic transfer then takes place through the application of a large electric field between the donor graphene sample (anode) and the heated acceptor glass substrate (cathode). Using this electrostatic technique, both patterned few-layer graphene from SiC(000-1) and chip-scale monolayer graphene from SiC(0001) are transferred to Pyrex and Zerodur substrates. Subsequent examination of the transferred graphene by Raman spectroscopy confirms that the graphene can be transferred without inducing defects. Furthermore, the strain inherent in epitaxial graphene on SiC(0001) is found to be partially relaxed after the transfer to the glass substrates.

  6. Electrostatic fuel conditioning of internal combustion engines

    NASA Technical Reports Server (NTRS)

    Gold, P. I.

    1982-01-01

    Diesel engines were tested to determine if they are influenced by the presence of electrostatic and magnetic fields. Field forces were applied in a variety of configurations including pretreatment of the fuel and air, however, no affect on engine performance was observed.

  7. Efficient optimization of electrostatic interactions between biomolecules.

    SciTech Connect

    Bardhan, J. P.; Altman, M. D.; White, J. K.; Tidor, B.; Mathematics and Computer Science; MIT

    2007-01-01

    We present a PDE-constrained approach to optimizing the electrostatic interactions between two biomolecules. These interactions play important roles in the determination of binding affinity and specificity, and are therefore of significant interest when designing a ligand molecule to bind tightly to a receptor. Using a popular continuum model and physically reasonable assumptions, the electrostatic component of the binding free energy is a convex, quadratic function of the ligand charge distribution. Traditional optimization methods require exhaustive pre-computation, and the expense has precluded a full exploration of the promise of electrostatic optimization in biomolecule analysis and design. In this paper we describe an approach in which the electrostatic simulations and optimization problem are solved simultaneously; unlike many PDE- constrained optimization frameworks, the proposed method does not incorporate the PDE as a set of equality constraints. This co-optimization approach can be used by itself to solve unconstrained problems or those with linear equality constraints, or in conjunction with primal-dual interior point methods to solve problems with inequality constraints. Model problems demonstrate that the co-optimization method is computationally efficient and can be used to solve realistic problems.

  8. Electrostatic sensitivity of secondary high explosives

    SciTech Connect

    Campos, C.A.

    1980-06-01

    An Electrostatic Sensitivity Test System designed at Pantex was used to evaluate the secondary high explosives PETN, HMX, RDX, HNS I, HNS II and TATB. The purpose of this study was to establish test conditions for a standard electrostatic sensitivity test and measure baseline data of a few secondary explosives. Although secondary explosives are often considered quite insensitive to an electrostatic discharge, PETN, HMX, and RDX were initiated. Several external elements to the high explosive were found to have an influence on sensitivity. Initiation appeared to be dependent on the nature of the discharge current curve. Those elements recognized as having a significant effect on the results were held constant in this study. These included: distance between discharge plates; sample moisture content; material density; and system resistance, capacitance and inductance. However, no attempt was made in this study to determine the extent to which the high explosive response to electrostatic discharge is affected by these factors since such correlation is not necessary to determine relative sensitivities.

  9. Electrostatic dust protection for optical elements

    NASA Astrophysics Data System (ADS)

    Hoenig, S. A.

    1982-02-01

    The application of electrostatic technology to the protection of optical components in earth-mounted and satellite orbital systems has been investigated. Theory and experiment indicate it is quite practical to prevent dust deposition in an earth environment. A mathematical analysis indicates even better results should be obtained in an orbital vehicle.

  10. Electrostatic MEMS devices with high reliability

    SciTech Connect

    Goldsmith, Charles L; Auciello, Orlando H; Sumant, Anirudha V; Mancini, Derrick C; Gudeman, Chris; Sampath, Suresh; Carlilse, John A; Carpick, Robert W; Hwang, James

    2015-02-24

    The present invention provides for an electrostatic microelectromechanical (MEMS) device comprising a dielectric layer separating a first conductor and a second conductor. The first conductor is moveable towards the second conductor, when a voltage is applied to the MEMS device. The dielectric layer recovers from dielectric charging failure almost immediately upon removal of the voltage from the MEMS device.

  11. Test progress on the electrostatic membrane reflector

    NASA Technical Reports Server (NTRS)

    Goslee, J. W.; Mihora, D. J.

    1981-01-01

    NASA is currently developing a low mass antenna which derives its reflector surface quality from the application of electrostatic forces to form a thin membrane into the desired concave reflector surface. The shuttle-deployed antenna would have a diameter of 100 m and an RMS surface smoothness of 10 to 1 mm for operation at 1 to 10 GHz. Surface quality measurements have been made on a highly deformable elastic membrane, pressurized by electrostatic forces. Included are the effects of the perimeter boundary, splicing of the membrane, the long-scale smoothness of commercial membranes, and the spatial controllability of the membrane using voltage adjustments to alter the electrostatic forces. The electrostatic membrane was found to operate well in an open-loop sense, showing a high degree of position stability and negligible power consumption in dry air. Visco-electric creep was not evident, but the polymer membrane did expand and contract considerably due to its hygroscopic expansion coefficient. A residual roughness of about 0.75 mm existed with the polymer used in these tests; this error is attributed to seams and membrane anisotropy where the material is stiffer in one direction.

  12. Dynamics of electrostatic microelectromechanical systems actuators

    NASA Astrophysics Data System (ADS)

    Yang, Yisong; Zhang, Ruifeng; Zhao, Le

    2012-02-01

    Electrostatic actuators are simple but important switching devices for microelectromechanical systems applications. Due to the difficulties associated with the electrostatic nonlinearity, precise mathematical description is often hard to obtain for the dynamics of these actuators. Here we present two sharp theorems concerning the dynamics of an undamped electrostatic actuator with one-degree of freedom, subject to linear and nonlinear elastic forces, respectively. We prove that both situations are characterized by the onset of one-stagnation-point periodic response below a well-defined pull-in voltage and a finite-time touch-down or collapse of the actuator above this pull-in voltage. In the linear-force situation, the stagnation level, pull-in voltage, and pull-in coordinate of the movable electrode may all be determined explicitly, following the recent work of Leus and Elata based on numerics. Furthermore, in the nonlinear-force situation, the stagnation level, pull-in voltage, and pull-in coordinate may be described completely in terms of the electrostatic and mechanical parameters of the model so that they approach those in the linear-force situation monotonically in the zero nonlinear-force limit.

  13. IMERG Global Precipitation Rates

    NASA Video Gallery

    NASA's Global Precipitation Measurement mission has produced its first global map of rainfall and snowfall. The GPM Core Observatory launched one year ago on Feb. 27, 2014 as a collaboration betwee...

  14. My NASA Data Precipitation

    NASA Video Gallery

    This lesson has two activities that help students develop a basic understanding of the relationship between cloud type and the form of precipitation and the relationship between the amount of water...

  15. Precipitation Estimates for Hydroelectricity

    NASA Technical Reports Server (NTRS)

    Tapiador, Francisco J.; Hou, Arthur Y.; de Castro, Manuel; Checa, Ramiro; Cuartero, Fernando; Barros, Ana P.

    2011-01-01

    Hydroelectric plants require precise and timely estimates of rain, snow and other hydrometeors for operations. However, it is far from being a trivial task to measure and predict precipitation. This paper presents the linkages between precipitation science and hydroelectricity, and in doing so it provides insight into current research directions that are relevant for this renewable energy. Methods described include radars, disdrometers, satellites and numerical models. Two recent advances that have the potential of being highly beneficial for hydropower operations are featured: the Global Precipitation Measuring (GPM) mission, which represents an important leap forward in precipitation observations from space, and high performance computing (HPC) and grid technology, that allows building ensembles of numerical weather and climate models.

  16. Chemisorption And Precipitation Reactions

    EPA Science Inventory

    The transport and bioavailability of chemical components within soils is, in part, controlled by partitioning between solids and solution. General terms used to describe these partitioning reactions include chemisorption and precipitation. Chemisorption is inclusive of the suit...

  17. Acceptability of human risk.

    PubMed

    Kasperson, R E

    1983-10-01

    This paper has three objectives: to explore the nature of the problem implicit in the term "risk acceptability," to examine the possible contributions of scientific information to risk standard-setting, and to argue that societal response is best guided by considerations of process rather than formal methods of analysis. Most technological risks are not accepted but are imposed. There is also little reason to expect consensus among individuals on their tolerance of risk. Moreover, debates about risk levels are often at base debates over the adequacy of the institutions which manage the risks. Scientific information can contribute three broad types of analyses to risk-setting deliberations: contextual analysis, equity assessment, and public preference analysis. More effective risk-setting decisions will involve attention to the process used, particularly in regard to the requirements of procedural justice and democratic responsibility.

  18. Acceptability of human risk.

    PubMed Central

    Kasperson, R E

    1983-01-01

    This paper has three objectives: to explore the nature of the problem implicit in the term "risk acceptability," to examine the possible contributions of scientific information to risk standard-setting, and to argue that societal response is best guided by considerations of process rather than formal methods of analysis. Most technological risks are not accepted but are imposed. There is also little reason to expect consensus among individuals on their tolerance of risk. Moreover, debates about risk levels are often at base debates over the adequacy of the institutions which manage the risks. Scientific information can contribute three broad types of analyses to risk-setting deliberations: contextual analysis, equity assessment, and public preference analysis. More effective risk-setting decisions will involve attention to the process used, particularly in regard to the requirements of procedural justice and democratic responsibility. PMID:6418541

  19. A rocket-borne electrostatic analyzer for measurement of energetic particle flux

    NASA Technical Reports Server (NTRS)

    Pozzi, M. A.; Smith, L. G.; Voss, H. D.

    1979-01-01

    A rocket-borne electrostatic analyzer experiment is described. It is used to measure energetic particle flux (0.9 to 14 keV) in the nighttime midlatitude E region. Energetic particle precipitation is believed to be a significant nighttime ionization source, particularly during times of high geomagnetic activity. The experiment was designed for use in the payload of a Nike Apache sounding rocket. The electrostatic analyzer employs two cylindrical parallel plates subtending a central angle of 90 deg. The voltage waveform supplied to the plates is a series of steps synchronized to the spin of the payload during flight. Both positive and negative voltages are provided, extending the detection capabilities of the instrument to both electrons and protons (and positive ions). The development, construction and operation of the instrument is described together with a preliminary evaluation of its performance in a rocket flight.

  20. Acceptance Test Plan.

    DTIC Science & Technology

    2014-09-26

    7 RD-Ai507 154 CCEPTANCE TEST PLN(U) WESTINGHOUSE DEFENSE ND i/i ELECTRO ICS CENTER BALTIMORE MD DEVELOPMENT AND OPERATIONS DIY D C KRRiJS 28 JUN...Ln ACCEPTANCE TEST PLAN FOR SPECIAL RELIABILITY TESTS FOR BROADBAND MICROWAVE AMPLIFIER PANEL David C. Kraus, Reliability Engineer WESTINGHOUSE ...ORGANIZATION b. OFFICE SYMBOL 7g& NAME OF MONITORING ORGANIZATION tIf appdeg ble) WESTINGHOUSE ELECTRIC CORP. - NAVAL RESEARCH LABORATORY e. AOORES$ (Ci7t

  1. Precipitation of DNA by polyamines: a polyelectrolyte behavior.

    PubMed Central

    Raspaud, E; Olvera de la Cruz, M; Sikorav, J L; Livolant, F

    1998-01-01

    Conditions of double-stranded DNA precipitation by the polyamines spermidine and spermine have been determined experimentally and compared to theoretical predictions. The influence of the concentrations of DNA and added monovalent salt, and of the DNA length has been investigated in a systematic manner. Three regimes of DNA concentrations are observed. We clarify the dependence of these regimes on the monovalent salt concentration and on the DNA length. Our observations make possible a rationalization of the experimental results reported in the literature. A comparison of the precipitation conditions of different kinds of polyelectrolytes suggests a general process. Our experimental data are compared to the "ion-bridging" model based on short-range electrostatic attractions. By starting from the spinodal equation, predicted by this model, and using the limiting form of Manning's fractions of condensed counterions, analytical expressions of the precipitation conditions have been found in the three regimes. Experimental and theoretical results are in good agreement. PMID:9449338

  2. Age and Acceptance of Euthanasia.

    ERIC Educational Resources Information Center

    Ward, Russell A.

    1980-01-01

    Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

  3. A novel electrostatic dry powder coating process for pharmaceutical dosage forms: immediate release coatings for tablets.

    PubMed

    Qiao, Mingxi; Zhang, Liqiang; Ma, Yingliang; Zhu, Jesse; Chow, Kwok

    2010-10-01

    An electrostatic dry powder coating process for pharmaceutical solid dosage forms was developed for the first time by electrostatic dry powder coating in a pan coater system. Two immediate release coating compositions with Opadry® AMB and Eudragit® EPO were successfully applied using this process. A liquid plasticizer was sprayed onto the surface of the tablet cores to increase the conductivity of tablet cores to enhance particle deposition, electrical resistivity reduced from greater than 1×10(13)Ωm to less than 1×10(9)Ωm, and to lower the glass transition temperature (T(g)) of the coating polymer for film forming in the pan coater. The application of liquid plasticizer was followed by spraying charged coating particles using an electrostatic charging gun to enhance the uniform deposition on tablet surface. The coating particles were coalesced into a thin film by curing at an acceptable processing temperature as formation was confirmed by SEM micrographs. The results also show that the optimized dry powder coating process produces tablets with smooth surface, good coating uniformity and release profile that are comparable to that of the tablet cores. The data also suggest that this novel electrostatic dry powder coating technique is an alternative to aqueous- or solvent-based coating process for pharmaceutical products.

  4. Arsenate removal using a combination treatment of precipitation and nanofiltration.

    PubMed

    Chang, F F; Liu, W J

    2012-01-01

    A combination treatment of Ca-precipitation and nanofiltration membrane was studied to remove arsenate from water. The selected nanofiltration membrane was an amphoteric charged membrane, proved by the results of ATR-FTIR spectra and zeta potential. The arsenate and calcium removal efficiencies had the lowest values at the isoelectric point of the nanofiltration membrane, attributed to the loosest steric hindrance and the weakest electrostatic repulsion. Above the isoelectric point, arsenate precipitated with calcium ion to form the low solubility compound calcium arsenate, while steric hindrance was the main mechanism of arsenate removal. In contrast, below the isoelectric point, the nanofiltration membrane with positive charges rejected calcium ion by electrostatic repulsion. The high electrostatic shielding of calcium ion prevented arsenate from coming close to the NF membrane. Either high feed arsenate concentration or high calcium oxide dose improved the removal amount of arsenate during the nanofiltration membrane separation process. In addition, the arsenate removal efficiency approached the highest value at 200 μg/L of feed arsenate concentration. The optimal transmembrane pressure was in a range of 0.5-0.7 MPa to restrict the formation of fouling cake on the nanofiltration membrane surface.

  5. Optimization design combined with coupled structural-electrostatic analysis for the electrostatically controlled deployable membrane reflector

    NASA Astrophysics Data System (ADS)

    Liu, Chao; Yang, Guigeng; Zhang, Yiqun

    2015-01-01

    The electrostatically controlled deployable membrane reflector (ECDMR) is a promising scheme to construct large size and high precision space deployable reflector antennas. This paper presents a novel design method for the large size and small F/D ECDMR considering the coupled structure-electrostatic problem. First, the fully coupled structural-electrostatic system is described by a three field formulation, in which the structure and passive electrical field is modeled by finite element method, and the deformation of the electrostatic domain is predicted by a finite element formulation of a fictitious elastic structure. A residual formulation of the structural-electrostatic field finite element model is established and solved by Newton-Raphson method. The coupled structural-electrostatic analysis procedure is summarized. Then, with the aid of this coupled analysis procedure, an integrated optimization method of membrane shape accuracy and stress uniformity is proposed, which is divided into inner and outer iterative loops. The initial state of relatively high shape accuracy and uniform stress distribution is achieved by applying the uniform prestress on the membrane design shape and optimizing the voltages, in which the optimal voltage is computed by a sensitivity analysis. The shape accuracy is further improved by the iterative prestress modification using the reposition balance method. Finally, the results of the uncoupled and coupled methods are compared and the proposed optimization method is applied to design an ECDMR. The results validate the effectiveness of this proposed methods.

  6. PREFACE: 13th International Conference on Electrostatics

    NASA Astrophysics Data System (ADS)

    Taylor, D. Martin

    2011-06-01

    Electrostatics 2011 was held in the city of Bangor which is located in North West Wales in an area of outstanding natural beauty close to the Snowdonia mountain range and bordering the Irish Sea. The history of the area goes back into the mists of times, but a continuous technological thread can be traced from the stone- and bronze-age craftsmen, who inhabited the area several thousand years ago, via the civil engineering and fortifications of the Romans and Edward I of England, through Marconi's long-wave trans-Atlantic transmitter near Caernarfon to the conference host. The School of Electronic Engineering at Bangor University has contributed much to the discipline of Electrostatics not only in teaching and research but also in supporting industry. It was a great pleasure for me, therefore, to have the pleasure of welcoming the world's experts in Electrostatics to Bangor in April 2011. In my preface to the Proceedings of Electrostatics 1999, I reported that almost 90 papers were presented. Interestingly, a similar number were presented in 2011 testifying to the importance and endurance of the subject. The all-embracing nature of electrostatics is captured in the pictorial depiction used for the conference logo: a hand-held plasma ball with its close link to gaseous discharges and the superimposed Antarctic aurora highlighting the featured conference themes of atmospheric, planetary and environmental electrostatics. Leading these themes were three invited contributions, the first by Giles Harrison who delivered the Bill Bright Memorial Lecture 'Fair weather atmospheric electricity', Carlos Calle on 'The electrostatic environments of Mars and the Moon' and Istvan Berta on 'Lightning protection - challenges, solutions and questionable steps in the 21st century'. Leading other key sessions were invited papers by Atsushi Ohsawa on 'Statistical analysis of fires and explosions attributed to static electricity over the last 50 years in Japanese industry' and Antonio

  7. A robust and accurate formulation of molecular and colloidal electrostatics.

    PubMed

    Sun, Qiang; Klaseboer, Evert; Chan, Derek Y C

    2016-08-07

    This paper presents a re-formulation of the boundary integral method for the Debye-Hückel model of molecular and colloidal electrostatics that removes the mathematical singularities that have to date been accepted as an intrinsic part of the conventional boundary integral equation method. The essence of the present boundary regularized integral equation formulation consists of subtracting a known solution from the conventional boundary integral method in such a way as to cancel out the singularities associated with the Green's function. This approach better reflects the non-singular physical behavior of the systems on boundaries with the benefits of the following: (i) the surface integrals can be evaluated accurately using quadrature without any need to devise special numerical integration procedures, (ii) being able to use quadratic or spline function surface elements to represent the surface more accurately and the variation of the functions within each element is represented to a consistent level of precision by appropriate interpolation functions, (iii) being able to calculate electric fields, even at boundaries, accurately and directly from the potential without having to solve hypersingular integral equations and this imparts high precision in calculating the Maxwell stress tensor and consequently, intermolecular or colloidal forces, (iv) a reliable way to handle geometric configurations in which different parts of the boundary can be very close together without being affected by numerical instabilities, therefore potentials, fields, and forces between surfaces can be found accurately at surface separations down to near contact, and (v) having the simplicity of a formulation that does not require complex algorithms to handle singularities will result in significant savings in coding effort and in the reduction of opportunities for coding errors. These advantages are illustrated using examples drawn from molecular and colloidal electrostatics.

  8. A robust and accurate formulation of molecular and colloidal electrostatics

    NASA Astrophysics Data System (ADS)

    Sun, Qiang; Klaseboer, Evert; Chan, Derek Y. C.

    2016-08-01

    This paper presents a re-formulation of the boundary integral method for the Debye-Hückel model of molecular and colloidal electrostatics that removes the mathematical singularities that have to date been accepted as an intrinsic part of the conventional boundary integral equation method. The essence of the present boundary regularized integral equation formulation consists of subtracting a known solution from the conventional boundary integral method in such a way as to cancel out the singularities associated with the Green's function. This approach better reflects the non-singular physical behavior of the systems on boundaries with the benefits of the following: (i) the surface integrals can be evaluated accurately using quadrature without any need to devise special numerical integration procedures, (ii) being able to use quadratic or spline function surface elements to represent the surface more accurately and the variation of the functions within each element is represented to a consistent level of precision by appropriate interpolation functions, (iii) being able to calculate electric fields, even at boundaries, accurately and directly from the potential without having to solve hypersingular integral equations and this imparts high precision in calculating the Maxwell stress tensor and consequently, intermolecular or colloidal forces, (iv) a reliable way to handle geometric configurations in which different parts of the boundary can be very close together without being affected by numerical instabilities, therefore potentials, fields, and forces between surfaces can be found accurately at surface separations down to near contact, and (v) having the simplicity of a formulation that does not require complex algorithms to handle singularities will result in significant savings in coding effort and in the reduction of opportunities for coding errors. These advantages are illustrated using examples drawn from molecular and colloidal electrostatics.

  9. Ultrahigh impedance method to assess electrostatic accelerator performance

    NASA Astrophysics Data System (ADS)

    Lobanov, Nikolai R.; Linardakis, Peter; Tsifakis, Dimitrios

    2015-06-01

    This paper describes an investigation of problem-solving procedures to troubleshoot electrostatic accelerators. A novel technique to diagnose issues with high-voltage components is described. The main application of this technique is noninvasive testing of electrostatic accelerator high-voltage grading systems, measuring insulation resistance, or determining the volume and surface resistivity of insulation materials used in column posts and acceleration tubes. In addition, this technique allows verification of the continuity of the resistive divider assembly as a complete circuit, revealing if an electrical path exists between equipotential rings, resistors, tube electrodes, and column post-to-tube conductors. It is capable of identifying and locating a "microbreak" in a resistor and the experimental validation of the transfer function of the high impedance energy control element. A simple and practical fault-finding procedure has been developed based on fundamental principles. The experimental distributions of relative resistance deviations (Δ R /R ) for both accelerating tubes and posts were collected during five scheduled accelerator maintenance tank openings during 2013 and 2014. Components with measured Δ R /R >±2.5 % were considered faulty and put through a detailed examination, with faults categorized. In total, thirty four unique fault categories were identified and most would not be identifiable without the new technique described. The most common failure mode was permanent and irreversible insulator current leakage that developed after being exposed to the ambient environment. As a result of efficient in situ troubleshooting and fault-elimination techniques, the maximum values of |Δ R /R | are kept below 2.5% at the conclusion of maintenance procedures. The acceptance margin could be narrowed even further by a factor of 2.5 by increasing the test voltage from 40 V up to 100 V. Based on experience over the last two years, resistor and insulator

  10. Electrostatic Solitary Waves (ESWs) observed by Kaguya near the Moon

    NASA Astrophysics Data System (ADS)

    Hashimoto, K.; Hashitani, M.; Omura, Y.; Kasahara, Y.; Kojima, H.; Ono, T.; Tsunakawa, H.

    2010-12-01

    In KAGUYA (SELENE) LRS[1], WFC-L [2] observes waveforms of plasma waves in 100Hz-100kHz and a lot of electrostatic solitary waves (ESWs) have been observed. Some results have been reported [3]. Although orthogonal dipole antennas are generally used in the observations, sometimes a pair of monopole antennas were used. We reports observations mainly by the latter antennas. The velocities and spatial scales of ESWs are evaluated from waveforms observed in the monopole mode. Generally their velocities are from several 100km/s to several 1000km/s. Their spatial scales are several 10m and the potential depths were less than 0.05 eV. Their velocities are very slow near the wake boundaries. The ESW waveforms have often components perpendicular to the background magnetic field and the potential structure has a component perpendicular to the background magnetic field. This means that these waves were observed close the source regions. Acknowledgments: The SELENE project has been organized by the Japan Aerospace Exploration Agency (JAXA). The authors express their thanks to all members of the SELENE project team. References [1] Y. Kasahara, Y. Goto, K. Hashimoto, T. Imachi, A. Kumamoto, T. Ono, and H. Matsumoto, Plasma Wave Observation Using Waveform Capture in the Lunar Radar Sounder on board the SELENE Spacecraft, Earth, Planets and Space, 60, 341-351, 2008. [2] K. Hashimoto, M. Hashitani, Y. Kasahara, Y. Omura, M.N. Nishino, Y. Saito, S. Yokota, T. Ono, H. Tsunakawa, H. Shibuya, M. Matsushima, H. Shimizu, and F. Takahashi, Electrostatic solitary waves associated with magnetic anomalies and wake boundary of the Moon observed by KAGUYA, accepted for publication in Geophys. Res. Lett., 2010.

  11. A study of local electrostatic filtration and main pre-filtration on airborne and surface dust levels in air-conditioned office premises.

    PubMed

    Croxford, B; Tham, K W; Young, A; Oreszczyn, T; Wyon, D

    2000-09-01

    The impact of electrostatic precipitation as a useful form of particulate filtration in the breathing zone is investigated in an intervention study in an air-conditioned commercial office in central London. Surface dust deposition and airborne dust levels are measured in the open plan zones of two floors--a control floor and a floor where the intervention is effected. The intervention consists of a sequence of weekly scenarios where the main pre-filters of the air-handling unit are switched between new and old filters, and where the electrostatic filters, located as uniformly as practicable on the open plan areas, are switched on or off. This 2 x 2 set of interventions is repeated over 4 cycles. It was found that the breathing zone filtration (BZF) by electrostatic precipitators reduces airborne dust significantly and appears to be more efficient in reducing smaller sized particles. No significant effect of BZF filters in reducing surface dust deposition was detected.

  12. Precipitation of oppositely charged polyelectrolytes in salt solutions.

    PubMed

    Kudlay, Alexander; Olvera de la Cruz, Monica

    2004-01-01

    We study phase separation in symmetric solutions of weakly charged flexible chains of opposite sign. Precipitation is caused by effective attractions due to charge fluctuations and by short-range attractions between monomers. The contribution from charge fluctuations is computed within the random phase approximation (RPA), which takes into account the connectivity of charges in the polyions. The impenetrability of the ions is accounted for by using a modified Coulomb potential in the RPA. In good solvent conditions the precipitate monotonically swells and eventually dissolves upon addition of salt. However, near the theta-solvent condition, but still in the good solvent, the precipitate can be stable at any salt concentration. Moreover, the density of the precipitate after initial decrease can increase with addition of salt. This effect is a result of redistribution of salt between the precipitate and the supernatant, which is due to an interplay of electrostatic and hardcore interactions. For not too weakly charged polyions the precipitate properties become strongly dependent on temperature even in good solvent conditions.

  13. High acceptance recoil polarimeter

    SciTech Connect

    The HARP Collaboration

    1992-12-05

    In order to detect neutrons and protons in the 50 to 600 MeV energy range and measure their polarization, an efficient, low-noise, self-calibrating device is being designed. This detector, known as the High Acceptance Recoil Polarimeter (HARP), is based on the recoil principle of proton detection from np[r arrow]n[prime]p[prime] or pp[r arrow]p[prime]p[prime] scattering (detected particles are underlined) which intrinsically yields polarization information on the incoming particle. HARP will be commissioned to carry out experiments in 1994.

  14. Baby-Crying Acceptance

    NASA Astrophysics Data System (ADS)

    Martins, Tiago; de Magalhães, Sérgio Tenreiro

    The baby's crying is his most important mean of communication. The crying monitoring performed by devices that have been developed doesn't ensure the complete safety of the child. It is necessary to join, to these technological resources, means of communicating the results to the responsible, which would involve the digital processing of information available from crying. The survey carried out, enabled to understand the level of adoption, in the continental territory of Portugal, of a technology that will be able to do such a digital processing. It was used the TAM as the theoretical referential. The statistical analysis showed that there is a good probability of acceptance of such a system.

  15. Centrifugal precipitation chromatography.

    PubMed

    Ito, Yoichiro; Qi, Lin

    2010-01-15

    Centrifugal precipitation chromatography separates analytes according their solubility in ammonium sulfate (AS) solution and other precipitants. The separation column is made from a pair of long spiral channels partitioned with a semipermeable membrane. In a typical separation, concentrated ammonium sulfate is eluted through one channel while water is eluted through the other channel in the opposite direction. This countercurrent process forms an exponential AS concentration gradient through the water channel. Consequently, protein samples injected into the water channel is subjected to a steadily increasing AS concentration and at the critical AS concentration they are precipitated and deposited in the channel bed by the centrifugal force. Then the chromatographic separation is started by gradually reducing the AS concentration in the AS channel which lowers the AS gradient concentration in the water channel. This results in dissolution of deposited proteins which are again precipitated at an advanced critical point as they move through the channel. Consequently, proteins repeat precipitation and dissolution through a long channel and finally eluted out from the column in the order of their solubility in the AS solution. The present method has been successfully applied to a number of analytes including human serum proteins, recombinant ketosteroid isomerase, carotenoid cleavage enzymes, plasmid DNA, polysaccharide, polymerized pigments, PEG-protein conjugates, etc. The method is capable to single out the target species of proteins by affinity ligand or immunoaffinity separation.

  16. Diffuse Aurora on Ganymede Driven by Electrostatic Waves

    NASA Astrophysics Data System (ADS)

    Singhal, R. P.; Tripathi, A. K.; Halder, S.; Singh, O. N., II

    2016-12-01

    The role of electrostatic electron cyclotron harmonic (ECH) waves in producing diffuse auroral emission O i 1356 Å on Ganymede is investigated. Electron precipitation flux entering the atmosphere of Ganymede due to pitch-angle diffusion by ECH waves into the atmospheric loss-cone is calculated. The analytical yield spectrum approach for electron energy degradation in gases is used for calculating diffuse auroral intensities. It is found that calculated O i 1356 Å intensity resulting from the precipitation of magnetospheric electrons observed near Ganymede is insufficient to account for the observed diffuse auroral intensity. This is in agreement with estimates made in earlier works. Heating and acceleration of ambient electrons by ECH wave turbulence near the magnetic equator on the field line connecting Ganymede and Jupiter are considered. Two electron distribution functions are used to simulate the heating effect by ECH waves. Use of a Maxwellian distribution with temperature 100 eV can produce about 50-70 Rayleigh O i 1356 Å intensities, and the kappa distribution with characteristic energy 50 eV also gives rise to intensities with similar magnitude. Numerical experiments are performed to study the effect of ECH wave spectral intensity profile, ECH wave amplitude, and temperature/characteristic energy of electron distribution functions on the calculated diffuse auroral intensities. The proposed missions, joint NASA/ESA Jupiter Icy Moon Explorer and the present JUNO mission to Jupiter, would provide new data to constrain the ECH wave and other physical parameters near Ganymede. These should help confirm the findings of the present study.

  17. Flue gas conditioning for improved particle collection in electrostatic precipitators. Quarterly technical report

    SciTech Connect

    Durham, M.D.

    1992-04-27

    The purpose of this research program is to identify and evaluate a variety of additives capable of increasing particle cohesion which could be used for improving collection efficiency in an ESP. A three-phase screening process will be used to provide the, evaluation of many additives in a logical and cost-effective manner. The three step approach involves the following experimental setups: 1. Provide a preliminary screening in the laboratory by measuring the effects of various conditioning agents on reentrainment of flyash particles in an electric field operating at simulated flue gas conditions. 2. Evaluate the successful additives using a 100 acfm bench-scale ESP operating on actual flue gas. 3. Obtain the data required for scaling up the technology by testing the two or three most promising conditioning agents at the pilot scale.

  18. EFFECTS OF TURBULENCE AND ELECTROHYDRODYAMICS ON THE PERFORMANCE OF ELECTROSTATIC PRECIPITATORS

    EPA Science Inventory

    Numerical simulations of the turbulent diffusion equation coupled with the electrohydrodynamics (EHD) are carried out for the plate-plate and wire-plate ESPs. The local particle concentration profiles and fractional collection efficiencies have been evaluated as a function of thr...

  19. PROCEEDINGS: EIGHTH SYMPOSIUM ON THE TRANSFER AND UTILIZATION OF PARTICULATE CONTROL TECHNOLOGY - VOLUME 1. ELECTROSTATIC PRECIPITATORS

    EPA Science Inventory

    The two-volume proceedings describe the latest research and development efforts to improve particulate control devices, while treating traditional concerns of operational cost and compliance. Overall, particulate control remains a key issue in the cost and applicability of furnac...

  20. ELECTROSTATIC PRECIPITATION AN AN ALTERNATIVE METHOD FOR /IN VITRO/ EXPOSURES TO MIXTURES OF GASES AND PARTICLES

    EPA Science Inventory

    There is an increasing interest in examining complex urban air pollution mixtures that include both particulate and gaseous components. Conventional methodologies are unable to expose lung cells in vitro simultaneously to both particulate and gaseous pollutants that are being for...

  1. Compliance Assurance Monitoring Technical Guidance Document Appendix A: Wet Electrostatic Precipitator Control Device

    EPA Pesticide Factsheets

    Compliance assurance monitoring is intended to provide a reasonable assurance of compliance with applicable requirements under the Clean Air Act for large emission units that rely on pollution control device equipment to achieve compliance.

  2. Ultrafast collisional ion heating by electrostatic shocks

    PubMed Central

    Turrell, A. E.; Sherlock, M.; Rose, S. J.

    2015-01-01

    High-intensity lasers can be used to generate shockwaves, which have found applications in nuclear fusion, proton imaging, cancer therapies and materials science. Collisionless electrostatic shocks are one type of shockwave widely studied for applications involving ion acceleration. Here we show a novel mechanism for collisionless electrostatic shocks to heat small amounts of solid density matter to temperatures of ∼keV in tens of femtoseconds. Unusually, electrons play no direct role in the heating and it is the ions that determine the heating rate. Ions are heated due to an interplay between the electric field of the shock, the local density increase during the passage of the shock and collisions between different species of ion. In simulations, these factors combine to produce rapid, localized heating of the lighter ion species. Although the heated volume is modest, this would be one of the fastest heating mechanisms discovered if demonstrated in the laboratory. PMID:26563440

  3. Teaching Electrostatics and Entropy in Introductory Physics

    NASA Astrophysics Data System (ADS)

    Reeves, Mark

    Entropy changes underlie the physics that dominates biological interactions. Indeed, introductory biology courses often begin with an exploration of the qualities of water that are important to living systems. However, one idea that is not explicitly addressed in most introductory physics or biology courses is important contribution of the entropy in driving fundamental biological processes towards equilibrium. I will present material developed to teach electrostatic screening in solutions and the function of nerve cells where entropic effects act to counterbalance electrostatic attraction. These ideas are taught in an introductory, calculus-based physics course to biomedical engineers using SCALEUP pedagogy. Results of student mastering of complex problems that cross disciplinary boundaries between biology and physics, as well as the challenges that they face in learning this material will be presented.

  4. Electrostatic trapping of metastable NH molecules

    SciTech Connect

    Hoekstra, Steven; Metsaelae, Markus; Zieger, Peter C.; Scharfenberg, Ludwig; Gilijamse, Joop J.; Meijer, Gerard; Meerakker, Sebastiaan Y. T. van de

    2007-12-15

    We report on the Stark deceleration and electrostatic trapping of {sup 14}NH (a{sup 1}{delta}) radicals. In the trap, the molecules are excited on the spin-forbidden A{sup 3}{pi}<-a{sup 1}{delta} transition and detected via their subsequent fluorescence to the X{sup 3}{sigma}{sup -} ground state. The 1/e trapping time is 1.4{+-}0.1 s, from which a lower limit of 2.7 s for the radiative lifetime of the a{sup 1}{delta}, v=0, J=2 state is deduced. The spectral profile of the molecules in the trapping field is measured to probe their spatial distribution. Electrostatic trapping of metastable NH followed by optical pumping of the trapped molecules to the electronic ground state is an important step toward accumulation of these radicals in a magnetic trap.

  5. Contemporary NMR Studies of Protein Electrostatics.

    PubMed

    Hass, Mathias A S; Mulder, Frans A A

    2015-01-01

    Electrostatics play an important role in many aspects of protein chemistry. However, the accurate determination of side chain proton affinity in proteins by experiment and theory remains challenging. In recent years the field of nuclear magnetic resonance spectroscopy has advanced the way that protonation states are measured, allowing researchers to examine electrostatic interactions at an unprecedented level of detail and accuracy. Experiments are now in place that follow pH-dependent (13)C and (15)N chemical shifts as spatially close as possible to the sites of protonation, allowing all titratable amino acid side chains to be probed sequence specifically. The strong and telling response of carefully selected reporter nuclei allows individual titration events to be monitored. At the same time, improved frameworks allow researchers to model multiple coupled protonation equilibria and to identify the underlying pH-dependent contributions to the chemical shifts.

  6. A simplified electrostatic model for hydrolase catalysis.

    PubMed

    Pessoa Filho, Pedro de Alcantara; Prausnitz, John M

    2015-07-01

    Toward the development of an electrostatic model for enzyme catalysis, the active site of the enzyme is represented by a cavity whose surface (and beyond) is populated by electric charges as determined by pH and the enzyme's structure. The electric field in the cavity is obtained from electrostatics and a suitable computer program. The key chemical bond in the substrate, at its ends, has partial charges with opposite signs determined from published force-field parameters. The electric field attracts one end of the bond and repels the other, causing bond tension. If that tension exceeds the attractive force between the atoms, the bond breaks; the enzyme is then a successful catalyst. To illustrate this very simple model, based on numerous assumptions, some results are presented for three hydrolases: hen-egg white lysozyme, bovine trypsin and bovine ribonuclease. Attention is given to the effect of pH.

  7. 2D Electrostatic Actuation of Microshutter Arrays

    NASA Technical Reports Server (NTRS)

    Burns, Devin E.; Oh, Lance H.; Li, Mary J.; Jones, Justin S.; Kelly, Daniel P.; Zheng, Yun; Kutyrev, Alexander S.; Moseley, Samuel H.

    2015-01-01

    An electrostatically actuated microshutter array consisting of rotational microshutters (shutters that rotate about a torsion bar) were designed and fabricated through the use of models and experiments. Design iterations focused on minimizing the torsional stiffness of the microshutters, while maintaining their structural integrity. Mechanical and electromechanical test systems were constructed to measure the static and dynamic behavior of the microshutters. The torsional stiffness was reduced by a factor of four over initial designs without sacrificing durability. Analysis of the resonant behavior of the microshutter arrays demonstrates that the first resonant mode is a torsional mode occurring around 3000 Hz. At low vacuum pressures, this resonant mode can be used to significantly reduce the drive voltage necessary for actuation requiring as little as 25V. 2D electrostatic latching and addressing was demonstrated using both a resonant and pulsed addressing scheme.

  8. Test progress on the electrostatic membrane reflector

    NASA Technical Reports Server (NTRS)

    Mihora, D. J.

    1981-01-01

    An extemely lightweight type of precision reflector antenna, being developed for potential deployment from the space shuttle, uses electrostatic forces to tension a thin membrane and form it into a concave reflector surface. The typical shuttle-deployed antenna would have a diameter of 100 meters and an RMS surface smoothness of 10 to 1 mm for operation at 1 to 10 GHz. NASA Langley Research Center built and is currently testing a subscale (16 foot diameter) model of the membrane reflector portion of such an antenna. Preliminary test results and principal factors affecting surface quality are addressed. Factors included are the effect of the perimeter boundary, splicing of the membrane, the long-scale smoothness of commercial membranes, and the spatial controllability of the membrane using voltage adjustments to alter the electrostatic pressure. Only readily available commercial membranes are considered.

  9. URANIUM PRECIPITATION PROCESS

    DOEpatents

    Thunaes, A.; Brown, E.A.; Smith, H.W.; Simard, R.

    1957-12-01

    A method for the recovery of uranium from sulfuric acid solutions is described. In the present process, sulfuric acid is added to the uranium bearing solution to bring the pH to between 1 and 1.8, preferably to about 1.4, and aluminum metal is then used as a reducing agent to convert hexavalent uranium to the tetravalent state. As the reaction proceeds, the pH rises amd a selective precipitation of uranium occurs resulting in a high grade precipitate. This process is an improvement over the process using metallic iron, in that metallic aluminum reacts less readily than metallic iron with sulfuric acid, thus avoiding consumption of the reducing agent and a raising of the pH without accomplishing the desired reduction of the hexavalent uranium in the solution. Another disadvantage to the use of iron is that positive ferric ions will precipitate with negative phosphate and arsenate ions at the pH range employed.

  10. FORMATION OF URANIUM PRECIPITATES

    DOEpatents

    Googin, J.M. Jr.

    1959-03-17

    A method is described for precipitation of uranium peroxide from uranium- containing solutions so as to obtain larger aggregates which facilitates washings decantations filtrations centrifugations and the like. The desired larger aggregate form is obtained by maintaining the pH of the solution in the approximate range of 1 to 3 and the temperature at about 25 deg C or below while carrytng out the precipitation. Then prior to removal of the precipitate a surface active sulfonated bicarboxyacids such as di-octyl sodium sulfo-succinates is incorporated in an anount of the order of 0.01 to 0.05 percent by weights and the slurry is allowed to ripen for about one-half hour at a temperatare below 10 deg C.

  11. Electrostatic waves in general magnetic field configurations

    SciTech Connect

    Chen, L.; Tsai, S.T.

    1981-07-01

    A scheme for investigating linear electrostatic waves in general magnetically confined plasmas is presented. The scheme is a generalization of the low-frequency (less than the cyclotron frequency) gyrokinetic formalism of Rutherford and Frieman as well as Taylor and Hastie to arbitrary frequencies. Governing integral wave equations for slab plasmas with magnetic shear as well as axisymmetric tokamaks are then derived to illustrate the applications.

  12. Controlling Charged Particles with Inhomogeneous Electrostatic Fields

    NASA Technical Reports Server (NTRS)

    Herrero, Federico A. (Inventor)

    2016-01-01

    An energy analyzer for a charged-particle spectrometer may include a top deflection plate and a bottom deflection plate. The top and bottom deflection plates may be non-symmetric and configured to generate an inhomogeneous electrostatic field when a voltage is applied to one of the top or bottom deflection plates. In some instances, the top and bottom deflection plates may be L-shaped deflection plates.

  13. Measurement and control of electrostatic patch potentials

    NASA Astrophysics Data System (ADS)

    Garrett, Joseph L.; Munday, Jeremy N.

    Electrostatic patch potentials hinder many precision measurements, particularly measurements of the Casimir force. Despite the improved force sensitivity achieved over the last decade, only recently have attempts been made to measure and quantify the effects of patch potentials. Here we present an analysis of patch potentials measured by Kelvin probe force microscopy (KPFM) and discuss methods to control these potentials (e.g. humidity, material choice, etc).

  14. Experimental Results of an Electrostatic Injector

    DTIC Science & Technology

    2014-10-01

    is important especially in the realm of biofuels . In the long term, the United States Department of Defense (DOD) is interested in converting many...of their vehicles to biofuels . Both the U.S. Army and Navy have invested substantially into research pertaining to converting existing fleets to... biofuel compatibility. The recent work of Owkes and Desjardins has investigated the effects of electrostatic spray with biofuels [11]. They

  15. Thermoelectric properties of electrostatically tunable antidot lattices

    NASA Astrophysics Data System (ADS)

    Goswami, Srijit; Siegert, Christoph; Shamim, Saquib; Pepper, Michael; Farrer, Ian; Ritchie, David A.; Ghosh, Arindam

    2010-09-01

    We report on the fabrication and characterization of a device which allows the formation of an antidot lattice (ADL) using only electrostatic gating. The antidot potential and Fermi energy of the system can be tuned independently. Well defined commensurability features in magnetoresistance as well as magnetothermopower are observed. We show that the thermopower can be used to efficiently map out the potential landscape of the ADL.

  16. Toward the Landau-Lifshitz version of the Thomson electrostatics theorem

    NASA Astrophysics Data System (ADS)

    Grinfeld, Michael; Grinfeld, Pavel

    In the classical textbook (Landau and Lifshitz, 1963), Landau and Lifshtz suggested their version of the famous Thomson variational principle (a.k.a Thomson theorem.) So far, their version has not gained the interest it deserves, either among physicists or among applied mathematicians. Partially, the lack of interest can be explained because of the quality of the suggested proof of the principle. It is considerably lower than the standards accepted in classical electrostatics and mathematical physics. Even more importantly, Landau and Lifshitz did not demostrate the minimum property of the electrostatic energy at equilibrium. In this note, we, first, modify and specify the Landau-Lifshitz formulation of the principle presenting it as the isoperimetric variational problem. Then, for this isoperimetric problem we calculate the first and second variations, and we prove that the first variation vanishes, whereas the second variation appears to be positive.

  17. Urban precipitation extremes: How reliable are regional climate models?

    NASA Astrophysics Data System (ADS)

    Mishra, Vimal; Dominguez, Francina; Lettenmaier, Dennis P.

    2012-02-01

    We evaluate the ability of regional climate models (RCMs) that participated in the North American Regional Climate Change Assessment Program (NARCCAP) to reproduce the historical season of occurrence, mean, and variability of 3 and 24-hour precipitation extremes for 100 urban areas across the United States. We show that RCMs with both reanalysis and global climate model (GCM) boundary conditions behave similarly and underestimate 3-hour precipitation maxima across almost the entire U.S. RCMs with both boundary conditions broadly capture the season of occurrence of precipitation maxima except in the interior of the western U.S. and the southeastern U.S. On the other hand, the RCMs do much better in identifying the season of 24-hour precipitation maxima. For mean annual precipitation maxima, regardless of the boundary condition, RCMs consistently show high (low) bias for locations in the western (eastern) U.S. Our results indicate that RCM-simulated 3-hour precipitation maxima at 100-year return period could be considered acceptable for stormwater infrastructure design at less than 12% of the 100 urban areas (regardless of boundary conditions). RCM performance for 24-hour precipitation maxima was slightly better, with performance acceptable for stormwater infrastructure design judged adequate at about 25% of the urban areas.

  18. Final wash precipitate feed simulants for DWPF Cold Chemical Runs

    SciTech Connect

    Marek, J.C.

    1992-05-15

    The Defense Waste Processing Facility (DWPF) is scheduled to start non-radioactive process operation in September, 1992. The Cold Chemical Runs will demonstrate acceptable process operation and provide data required to satisfy the Waste Compliance Plan. Five basic sludge simulants will be required for these tests. Two basic precipitate simulants will be needed to operate the Salt Processing Cell with and without mercury in the precipitate feed. Precipitate feed simulant specifications for DWPF Cold Chemical Runs are revised in this report. All previous specifications of precipitate feed simulants for DWPF Cold Chemical Runs (CCRs) are superceded by this document. The revision is needed to (1) eliminate use of hydroxylamine nitrate (HAN) in the precipitate process operation, (2) simulate the projected composition of the precipitate feed to DWPF produced by final washing to reduce the nitrite concentration to [le] 0.01M without washing the simulated feed, (3) delete organic trim chemical additions to the precipitate feed and (4) specify an additive to prevent foaming of the precipitate. Two specifications are provided to operate the Salt Processing Cell with mercury (Tests 5 6) and without mercury (Tests 1--4) in the precipitate feed.

  19. Final wash precipitate feed simulants for DWPF Cold Chemical Runs

    SciTech Connect

    Marek, J.C.

    1992-05-15

    The Defense Waste Processing Facility (DWPF) is scheduled to start non-radioactive process operation in September, 1992. The Cold Chemical Runs will demonstrate acceptable process operation and provide data required to satisfy the Waste Compliance Plan. Five basic sludge simulants will be required for these tests. Two basic precipitate simulants will be needed to operate the Salt Processing Cell with and without mercury in the precipitate feed. Precipitate feed simulant specifications for DWPF Cold Chemical Runs are revised in this report. All previous specifications of precipitate feed simulants for DWPF Cold Chemical Runs (CCRs) are superceded by this document. The revision is needed to (1) eliminate use of hydroxylamine nitrate (HAN) in the precipitate process operation, (2) simulate the projected composition of the precipitate feed to DWPF produced by final washing to reduce the nitrite concentration to {le} 0.01M without washing the simulated feed, (3) delete organic trim chemical additions to the precipitate feed and (4) specify an additive to prevent foaming of the precipitate. Two specifications are provided to operate the Salt Processing Cell with mercury (Tests 5&6) and without mercury (Tests 1--4) in the precipitate feed.

  20. Impacts of Light Precipitation Detection with Dual Frequency Radar on Global Precipitation Measurement Core Observatory (GPM/DPR)

    NASA Astrophysics Data System (ADS)

    Takayabu, Y. N.; Hamada, A.; Oki, R.; Kachi, M.; Kubota, T.; Iguchi, T.; Shige, S.; Nakamura, K.

    2014-12-01

    The Dual-frequency Precipitation Radar (DPR) on board the GPM Core Observatory consists of Ku-band (13.6 GHz) and Ka-band (35.5 GHz) radars, with an improved minimum detection sensitivity of precipitation compared to the Tropical Rainfall Measuring Mission Precipitation Radar (TRMM PR). We have studied impacts of improved detection sensitivity with the GPM DPR compared with the TRMM PR. One example of light precipitation is, a scattered rainfall around a trough over the subtropical South Pacific Ocean, which consists of weak but erect precipitation reaching over the melting level of ~2.5 km and trailing precipitation above, which reaches as high as 5km. Another example is a light anvil precipitation spreading from convective cores of a storm in the upper troposphere, overcasting shallow convective precipitation below. The ability of globally detecting such light precipitation will improve our knowledge of precipitation processes. Utilizing an early version of the DPR product, a quick evaluation on statistical impacts of increasing the detection sensitivity from 17dBZ to 12dBZ has been performed. Here, 17dBZ is the value which is mostly accepted as the performed detection sensitivity of the TRMM PR, and 12dBZ is the guaranteed sensitivity for GPM Ka-band radar. For the near surface precipitation, impacts are significant in terms of numbers, but limited to several regions in terms of the rainfall volume. Volume impacts are much larger at the upper troposphere, which is indicated by the detection of the anvil precipitation, for example. The upper level improvements are mostly found where the deep precipitation systems exist. Quantitative discussions utilizing the latest version of the DPR data, which is scheduled to be released to the public in September, will be presented at the session.

  1. Precipitation-Regulated Feedback

    NASA Astrophysics Data System (ADS)

    Voit, Mark

    2016-07-01

    Star formation in the central galaxies of galaxy clusters appears to be fueled by precipitation of cold clouds out of hot circumgalactic gas via thermal instability. I will present both observational and theoretical support for the precipitation mode in large galaxies and discuss how it can be implemented in cosmological simulations of galaxy evolution. Galaxy cluster cores are unique laboratories for studying the astrophysics of thermal instability and may be teaching us valuable lessons about how feedback works in galaxies spanning the entire mass spectrum.

  2. Application of electrostatic prevention technology on polyethylene silos

    NASA Astrophysics Data System (ADS)

    Gong, Hong; Liu, Quanzhen; Tan, Fenggui; Zhang, Yunpeng

    2013-03-01

    The main reasons of static electric explosion accidents in polyolefin plant silos were analyzed in this paper, and the study finds that the reasons include control failure of flammable gas content in the feed, high electrification caused by the wind supply, and frequent electrostatic discharge in silos. The electrostatic-reducing technologies of polyolefin powder were introduced, and its application performance in polyolefin plant silos was also clarified. In addition, the methods including FDCS and DGES for evaluation of electrostatic explosion in polyolefin plant silo were proposed. In the end, the risk of electrostatic explosion in PE plant blended silo was evaluated before and after application of electrostatic reducing technology.

  3. Cloverleaf microgyroscope with electrostatic alignment and tuning

    NASA Technical Reports Server (NTRS)

    Challoner, A. Dorian (Inventor); Gutierrez, Roman C. (Inventor); Tang, Tony K. (Inventor)

    2007-01-01

    A micro-gyroscope (10) having closed loop output operation by a control voltage (V.sub.ty), that is demodulated by a drive axis (x-axis) signal V.sub.thx of the sense electrodes (S1, S2), providing Coriolis torque rebalance to prevent displacement of the micro-gyroscope (10) on the output axis (y-axis) V.sub.thy.about.0. Closed loop drive axis torque, V.sub.tx maintains a constant drive axis amplitude signal, V.sub.thx. The present invention provides independent alignment and tuning of the micro-gyroscope by using separate electrodes and electrostatic bias voltages to adjust alignment and tuning. A quadrature amplitude signal, or cross-axis transfer function peak amplitude is used to detect misalignment that is corrected to zero by an electrostatic bias voltage adjustment. The cross-axis transfer function is either V.sub.thy/V.sub.ty or V.sub.tnx/V.sub.tx. A quadrature signal noise level, or difference in natural frequencies estimated from measurements of the transfer functions is used to detect residual mistuning, that is corrected to zero by a second electrostatic bias voltage adjustment.

  4. Brownian dynamics simulation of electrostatically interacting proteins

    NASA Astrophysics Data System (ADS)

    Ermakova, E.; Krushelnitsky, A. G.; Fedotov, V. D.

    Brownian dynamics simulation software has been developed to study the dynamics of proteins as a whole in solution. The proteins were modelled as spheres with point dipoles embedded in the centre of sphere. A set of Brownian dynamics simulations at different values of the dipole moments, protein concentration and translational diffusion coefficient was performed to investigate the influence of interprotein electrostatic interactions on dynamic protein behaviour in solution. It was shown that these interactions led to the slowing down of protein rotation and a complex non-exponential shape of the rotational correlation function. Analysis of the correlation functions was performed within the frame of the model of electrostatic interprotein interactions advanced earlier on the basis of NMR and dielectric spectroscopy data. This model assumes that, due to electrostatic interactions, protein Brownian rotation becomes anisotropic. The lifetime of this anisotropy is controlled mainly by translational diffusion of proteins. Thus, the correlation function can be decomposed into two components corresponding to anisotropic Brownian rotation and an isotropic motion of an external electric field vector produced by the surrounding proteins.

  5. Biomolecular electrostatics and solvation: a computational perspective

    PubMed Central

    Ren, Pengyu; Chun, Jaehun; Thomas, Dennis G.; Schnieders, Michael J.; Marucho, Marcelo; Zhang, Jiajing; Baker, Nathan A.

    2012-01-01

    An understanding of molecular interactions is essential for insight into biological systems at the molecular scale. Among the various components of molecular interactions, electrostatics are of special importance because of their long-range nature and their influence on polar or charged molecules, including water, aqueous ions, proteins, nucleic acids, carbohydrates, and membrane lipids. In particular, robust models of electrostatic interactions are essential for understanding the solvation properties of biomolecules and the effects of solvation upon biomolecular folding, binding, enzyme catalysis, and dynamics. Electrostatics, therefore, are of central importance to understanding biomolecular structure and modeling interactions within and among biological molecules. This review discusses the solvation of biomolecules with a computational biophysics view towards describing the phenomenon. While our main focus lies on the computational aspect of the models, we provide an overview of the basic elements of biomolecular solvation (e.g., solvent structure, polarization, ion binding, and nonpolar behavior) in order to provide a background to understand the different types of solvation models. PMID:23217364

  6. Electrostatic Potential of Specific Mineral Faces

    SciTech Connect

    Zarzycki, Piotr P.; Chatman, Shawn ME; Preocanin, Tajana; Rosso, Kevin M.

    2011-07-05

    Reaction rates of environmental processes occurring at hydrated mineral surfaces are primarily controlled by the electrostatic potential that develops at the interface. This potential depends on the structure of exposed crystal faces, as well as the pH and the type of ions and their interactions with these faces. Despite its importance, experimental methods for determining fundamental electrostatic properties of specific crystal faces such as the point of zero charge are few. Here we show that this information may be obtained from simple, cyclic potentiometric titration using a well characterized single-crystal electrode exposing the face of interest. The method exploits the presence of a hysteresis loop in the titration measurements that allows extraction of key electrostatic descriptors using the Maxwell construction. The approach is demonstrated for hematite (α-Fe2O3) (001), and a thermodynamic proof is provided for the resulting estimate of its point of zero charge. Insight gained from this method will aid in predicting the fate of migrating contaminants, mineral growth/dissolution processes, mineral-microbiological interactions, and in testing surface complexation theories.

  7. Electrostatic separation of brass from industrial wastes

    SciTech Connect

    Iuga, A.; Morar, R.; Samuila, A.; Mihailescu, M.; Cuglesan, I.; Dascalescu, L.

    1999-05-01

    Previous studies have demonstrated that electrostatic separation can be successfully employed for the recycling of nonferrous metals from chopped electric wire and cable scrap. The aim of this paper was to investigate the possibility of using the electric field forces for the selective sorting of other granular mixtures, such as brass dross. Laboratory tests of electrostatic separation were carried out on three samples: 0.08--1 mm, 0.08--0.2 mm, and 0.2--1 mm, containing more than 66% of brass. Sample 1 was separated in a corona-electrostatic field, generated by a standard electrode arrangement: a grounded rotating roll electrode (diameter 150 mm) and two high-voltage electrodes (wire-type dual corona electrode + tubular electrode). Processing of the other two samples was carried out in a custom-designed separator comprising an extended corona field generated between a matrix-type multineedle corona electrode and a roll electrode of large diameter (250 mm). Chemical analysis of the products showed that more than 90% of the brass can be recovered with a purity higher than 95%. The extended corona field electrode arrangement proposed in this paper seems to be a promising solution for the effective recycling of other granular wastes containing copper, aluminum, and their alloys.

  8. Investigation on particle flow characteristics using electrostatic sensor array

    NASA Astrophysics Data System (ADS)

    Fu, Feifei; Xu, Chuanlong; Heming, Gao, Jian, Li; Wang, Shimin

    2012-03-01

    In recent years, great advance has been made on electrostatic sensing technique for gas-solid flow measurement. Electrostatic tomography(EST) has been used in experiment researches as a novel non-intrusive measurement technique. Electrostatic sensor array is one of the key parts of electrostatic tomography system. Based on the image reconstruction algorithm, the charge on the particles can be obtained from the electrostatic measurement signals. However, reports on the relationship between the electrostatic signal acquired by the electrostatic sensor array and flow characteristics of the particles were very few. In this paper the mathematical model of the electrostatic sensor array was adopted, and its spatial sensitivity field was investigated. In the experiment, the electrostatic signals of the quarter flow and full pipe flow were acquired by the electrostatic sensor array. Based on the EST experiment and Power Spectrum Analysis of Signal, the energy distributions of those two flow patterns were compared. Results show that the sensitivity of the electrostatic sensor array is inhomogeneous in three-dimensional space. For this reason, the energy distributions of those two flow patterns are distinguished.

  9. Structural phylogeny by profile extraction and multiple superimposition using electrostatic congruence as a discriminator

    SciTech Connect

    Chakraborty, Sandeep; Rao, Basuthkar J.; Baker, Nathan A.; Asgeirsson, Bjarni

    2013-04-01

    Phylogenetic analysis of proteins using multiple sequence alignment (MSA) assumes an underlying evolutionary relationship in these proteins which occasionally remains undetected due to considerable sequence divergence. Structural alignment programs have been developed to unravel such fuzzy relationships. However, none of these structure based methods have used electrostatic properties to discriminate between spatially equivalent residues. We present a methodology for MSA of a set of related proteins with known structures using electrostatic properties as an additional discriminator (STEEP). STEEP first extracts a profile, then generates a multiple structural superimposition providing a consolidated spatial framework for comparing residues and finally emits the MSA. Residues that are aligned differently by including or excluding electrostatic properties can be targeted by directed evolution experiments to transform the enzymatic properties of one protein into another. We have compared STEEP results to those obtained from a MSA program (ClustalW) and a structural alignment method (MUSTANG) for chymotrypsin serine proteases. Subsequently, we used PhyML to generate phylogenetic trees for the serine and metallo-β-lactamase superfamilies from the STEEP generated MSA, and corroborated the accepted relationships in these superfamilies. We have observed that STEEP acts as a functional classifier when electrostatic congruence is used as a discriminator, and thus identifies potential targets for directed evolution experiments. In summary, STEEP is unique among phylogenetic methods for its ability to use electrostatic congruence to specify mutations that might be the source of the functional divergence in a protein family. Based on our results, we also hypothesize that the active site and its close vicinity contains enough information to infer the correct phylogeny for related proteins.

  10. Electrostatic fields in a dusty Martian environment

    NASA Technical Reports Server (NTRS)

    Sentman, D. D.

    1991-01-01

    While there have been several studies suggesting the possibility of electrical activity on Mars, to date there have been no measurements to search for evidence of such activity. In the absence of widespread water clouds and convective storm systems similar to those on the Earth and Jupiter, the most likely candidate for the creation of electrostatic charges and fields is triboelectric charging of dust, i.e., the friction between blown dust and the ground, and of dust particles with each other. Terrestrial experience demonstrates that electric fields 5 to 15 kV-m(exp -1) are not uncommon in dust storms and dust devils in desert regions, where the polarity varies according to the chemical composition and grain size. Simple laboratory experiments have demonstrated that modest electrostatic fields of roughly 5,000 V-m(exp -1) may be produced, along with electrical spark discharges and glow discharges, in a simulation of a dusty, turbulent Martian surface environment. While the Viking landers operated for several years with no apparent deleterious effects from electrostatic charging, this may have been at least partly due to good engineering design utilizing pre-1976 electronic circuitry to minimize the possibility of differential charging among the various system components. However, free roaming rovers, astronauts, and airborne probes may conceivably encounter an environment where electrostatic charging is a frequent occurrence, either by way of induction from a static electric field or friction with the dusty surface and atmosphere. This raises the possibility of spark discharges or current surges when subsequent contact is made with other pieces of electrical equipment, and the possibility of damage to modern microelectronic circuitry. Measurements of electrostatic fields on the surface of Mars could therefore be valuable for assessing this danger. Electric field measurements could also be useful for detecting natural discharges that originate in dust storms. This

  11. The Global Precipitation Mission

    NASA Technical Reports Server (NTRS)

    Braun, Scott; Kummerow, Christian

    2000-01-01

    The Global Precipitation Mission (GPM), expected to begin around 2006, is a follow-up to the Tropical Rainfall Measuring Mission (TRMM). Unlike TRMM, which primarily samples the tropics, GPM will sample both the tropics and mid-latitudes. The primary, or core, satellite will be a single, enhanced TRMM satellite that can quantify the 3-D spatial distributions of precipitation and its associated latent heat release. The core satellite will be complemented by a constellation of very small and inexpensive drones with passive microwave instruments that will sample the rainfall with sufficient frequency to be not only of climate interest, but also have local, short-term impacts by providing global rainfall coverage at approx. 3 h intervals. The data is expected to have substantial impact upon quantitative precipitation estimation/forecasting and data assimilation into global and mesoscale numerical models. Based upon previous studies of rainfall data assimilation, GPM is expected to lead to significant improvements in forecasts of extratropical and tropical cyclones. For example, GPM rainfall data can provide improved initialization of frontal systems over the Pacific and Atlantic Oceans. The purpose of this talk is to provide information about GPM to the USWRP (U.S. Weather Research Program) community and to discuss impacts on quantitative precipitation estimation/forecasting and data assimilation.

  12. Total Precipitable Water

    SciTech Connect

    2012-01-01

    The simulation was performed on 64K cores of Intrepid, running at 0.25 simulated-years-per-day and taking 25 million core-hours. This is the first simulation using both the CAM5 physics and the highly scalable spectral element dynamical core. The animation of Total Precipitable Water clearly shows hurricanes developing in the Atlantic and Pacific.

  13. Importance of the substrate nature to preserve microorganisms' cultivability in electrostatic air samplers

    NASA Astrophysics Data System (ADS)

    Roux, Jean-Maxime; Rongier, Anaëlle; Jary, Dorothée

    2015-10-01

    Recent research shows that electrostatic precipitation is a gentle method to collect airborne microorganisms and preserve their cultivability. However, the corona discharge used to charge the particles and the high electric field used to capture them are known to have a germicidal effect. The present paper investigates this paradoxical situation. Vegetative cells of E. coli and B. subtilis and spores of A. fumigatus and B. subtilis were deposited on different media and subjected to electrostatic fields of different strengths and polarities for controlled time periods. Vegetative cells are inactivated on cultivation agar plates, but remain cultivable when exposed on a stainless steel electrode and transferred afterwards onto agar plates. For the investigated conditions, spores were not affected by the corona discharge. Further experiments with a pH indicator show that chemical reactions occur when an aqueous media is exposed to the discharge. Some of these reactions are likely to create hydrogen peroxide which is known to kill a broad range of microorganisms. It is therefore highlighted that collecting electrodes in electrostatic air samplers should rather be dry conductive media.

  14. Clustering of carboxylated magnetite nanoparticles through polyethylenimine: Covalent versus electrostatic approach

    NASA Astrophysics Data System (ADS)

    Tóth, Ildikó Y.; Nesztor, Dániel; Novák, Levente; Illés, Erzsébet; Szekeres, Márta; Szabó, Tamás; Tombácz, Etelka

    2017-04-01

    Carboxylated magnetite nanoparticles (MNPs) are frequently used to develop materials with enhanced properties for MRI and hyperthermia. The controlled clustering of MNPs via covalent or electrostatic approaches provides opportunity to prepare high quality materials. MNPs were prepared by co-precipitation and coated by poly(acrylic acid-co-maleic acid) (PAM@MNP). The clusters were synthesized from purified PAM@MNPs and polyethylenimine (PEI) solution via electrostatic interaction and covalent bond formation (ES-cluster and CB-cluster, respectively). The electrostatic adhesion (-NH3+ and -COO-) and the formed amide bond were confirmed by ATR-FTIR. The averaged area of CB-clusters was about twice as large as that of ES-cluster, based on TEM. The SAXS results showed that the surface of MNPs was smooth and the nanoparticles were close packed in both clusters. The pH-dependent aggregation state and zeta potential of clusters were characterized by DLS and electrophoresis measurements, the clusters were colloidally stable at pH>5. In hyperthermia experiments, the values of SAR were about two times larger for the chemically bonded cluster. The MRI studies showed exceptionally high transversion relaxivities, the r2 values are 457 mM-1 s-1 and 691 mM-1 s-1 for ES-cluster and CB-cluster, respectively. Based on these results, the chemically clustered product shows greater potential for feasible biomedical applications.

  15. Electrostatic Hazard Considerations for ODC Solvent Replacement Selection Testing

    NASA Technical Reports Server (NTRS)

    Fairbourn, Brad

    1999-01-01

    ODC solvents are used to clean many critical substrates during solid rocket motor production operations. Electrostatic charge generation incidental to these cleaning operations can pose a major safety issue. Therefore, while determining the acceptability of various ODC replacement cleaners, one aspect of the selection criteria included determining the extent of electric charge generation during a typical solvent cleaning operation. A total of six candidate replacement cleaners, sixteen critical substrates, and two types of cleaning swatch materials were studied in simulated cleaning operations. Charge generation and accumulation effects were investigated by measuring the peak voltage and brush discharging effects associated with each cleaning process combination. In some cases, charge generation was found to be very severe. Using the conductivity information for each cleaner, the peak voltage data could in some cases, be qualitatively predicted. Test results indicated that severe charging effects could result in brush discharges that could potentially result in flash fire hazards when occurring in close proximity to flammable vapor/air mixtures. Process controls to effectively mitigate these hazards are discussed.

  16. Co-removal of hexavalent chromium during copper precipitation.

    PubMed

    Sun, J; Huang, J C

    2002-01-01

    electrostatic attraction and/or inorganic ligand exchange. At pH of 6 to 10, the extent of adsorption decreases with increasing pH, and the adsorption capacity seems to coincide with the progressive reduction of positive zeta potentials of the precipitated particles.

  17. Sonic boom acceptability studies

    NASA Technical Reports Server (NTRS)

    Shepherd, Kevin P.; Sullivan, Brenda M.; Leatherwood, Jack D.; Mccurdy, David A.

    1992-01-01

    The determination of the magnitude of sonic boom exposure which would be acceptable to the general population requires, as a starting point, a method to assess and compare individual sonic booms. There is no consensus within the scientific and regulatory communities regarding an appropriate sonic boom assessment metric. Loudness, being a fundamental and well-understood attribute of human hearing was chosen as a means of comparing sonic booms of differing shapes and amplitudes. The figure illustrates the basic steps which yield a calculated value of loudness. Based upon the aircraft configuration and its operating conditions, the sonic boom pressure signature which reaches the ground is calculated. This pressure-time history is transformed to the frequency domain and converted into a one-third octave band spectrum. The essence of the loudness method is to account for the frequency response and integration characteristics of the auditory system. The result of the calculation procedure is a numerical description (perceived level, dB) which represents the loudness of the sonic boom waveform.

  18. Designing Electrostatic Accelerometers for Next Gravity Missions

    NASA Astrophysics Data System (ADS)

    Huynh, Phuong-Anh; Foulon, Bernard; Christophe, Bruno; Liorzou, Françoise; Boulanger, Damien; Lebat, Vincent

    2016-04-01

    Square cuboid electrostatic accelerometers sensor core have been used in various combinations in recent and still flying missions (CHAMP, GRACE, GOCE). ONERA is now in the process of delivering such accelerometers for the GRACE Follow-On mission. The goal is to demonstrate the performance benefits of an interferometry laser ranging method for future low-low satellite to satellite missions. The electrostatic accelerometer becoming thus the system main performance limiter, we propose for future missions a new symmetry which will allow for three ultrasensitive axes instead of two. This implies no performance ground testing, as the now cubic proof-mass will be too heavy, but only free fall tests in catapult mode, taking advantage of the additional microgravity testing time offered by the updated ZARM tower. The updated mission will be in better adequacy with the requirements of a next generation of smaller and drag compensated micro-satellites. In addition to the measurement of the surface forces exerted on the spacecraft by the atmospheric drag and by radiation pressures, the accelerometer will become a major part of the attitude and orbit control system by acting as drag free sensor and by accurately measuring the angular accelerations. ONERA also works on a hybridization of the electrostatic accelerometer with an atomic interferometer to take advantage of the absolute nature of the atomic interferometer acceleration measurement and its great accuracy in the [5-100] mHz bandwidth. After a description of the improvement of the GRACE-FO accelerometer with respect to the still in-orbit previous models and a status of its development, the presentation will describe the new cubic configuration and how its operations and performances can be verified in the Bremen drop tower.

  19. Electrostatic interactions in hirudin-thrombin binding.

    PubMed

    Sharp, K A

    1996-08-30

    Hirudin is a good anticoagulant owing to potent inhibition of the serine protease thrombin. An aspartate- and glutamate-rich portion of hirudin plays an important part in its tight binding to thrombin through a ladder of salt bridges, and these residues have previously been mutated to asparagine or glutamine. Detailed calculations of the electrostatic contribution to changes in binding from these mutations have been performed using the finite-difference Poisson-Boltzmann method which include charge--charge interactions, solvation interactions, the residual electrostatic interaction of mutant residues, pKa shifts, and ionic strength. Single mutant effects on binding energy were close to experimental values, except for the D55N mutant whose effect is overestimated, perhaps because of displacement of a bound chloride ion from the site where it binds. Multiple mutation values were generally overestimated. The effect of pKa shifts upon the binding is significant for one hirudin residue E58, but this appears to be due to a poor salt bridge with thrombin caused by crystal contacts. Electrostatic interaction between the acidic residues is unfavorable. However, analysis of experimental multiple mutation/single mutation data shows apparently negative interactions between these residues, from which it is concluded that structural changes can occur in the complex to relieve an unfavorable interaction when more than one acidic residue is mutated. In all cases, there is a loss in stability of the complex from mutations due to loss of favorable charge--charge interactions with thrombin, but this is largely compensated for by reduced unfavorable desolvation interactions, and by residual polar interactions in the Asn/Gln mutants.

  20. SPARCLE: Electrostatic Tool for Lunar Dust Control

    SciTech Connect

    Clark, P. E.; Curtis, S. A.; Minetto, F.; Cheung, C. Y.; Keller, J. F.; Moore, M.; Calle, C. I.

    2009-03-16

    Successful exploration of most planetary surfaces, with their impact-generated dusty regoliths, will depend on the capabilities to keep surfaces free of the dust which could compromise performance and to collect dust for characterization. Solving the dust problem is essential before we return to the Moon. During the Apollo missions, the discovery was made that regolith fines, or dust, behaved like abrasive velcro, coating surfaces, clogging mechanisms, and making movement progressively more difficult as it was mechanically stirred up during surface operations, and abrading surfaces, including spacesuits, when attempts were made to remove it manually. In addition, some of the astronauts experienced breathing difficulties when exposed to dust that got into the crew compartment. The successful strategy will deal with dust dynamics resulting from interaction between mechanical and electrostatic forces. Here we will describe the surface properties of dust particles, the basis for their behavior, and an electrostatically-based approach and methodology for addressing this issue confirmed by our preliminary results. Our device concept utilizes a focused electron beam to control the electrostatic potential of the surface. A plate of the opposite potential is then used to induce dust migration in the presence of an electrical field. Our goal is a compact device of <5 kg mass and using <5 watts of power to be operational in <5 years with heritage from ionic sweepers for active spacecraft potential control (e.g., on POLAR). Rovers could be fitted with devices that could harness the removal of dust for sampling as part of the extended exploration process on Mercury, Mars, asteroids or outer solar system satellites, as well as the Moon.

  1. Electrostatic Surface Characterization by Scanning Probe Microscopy.

    NASA Astrophysics Data System (ADS)

    Leng, Yaojian

    1995-01-01

    The electrostatic properties of surfaces are important in biological, polymer and semiconductor physics. Several newly developed scanning probe microscopies can provide nanometer scale characterization of these surfaces. In the course of this work, an Electrostatic Force Microscope (EFM) and a Kelvin Probe Force Microscope (KPFM) have been built using interferometric force detection. An EFM is a modified noncontact mode Atomic Force Microscope, capable of simultaneously measuring surface topography, surface charge or surface potential, and capacitance. A KPFM is similar to the classical Kelvin method in measuring surface potential, only in this case, forces are detected instead of currents. A 10^{-4} A/surdHz displacement detection sensitivity has been achieved. A 200 A spatial resolution and a sub-mV electrostatic potential sensitivity have been demonstrated. The capability of the EFM to map charge and dielectric variations on biological and polymeric surfaces has been demonstrated. Studies have been made on red blood cells, modified Teflon FEP films, and contact lens materials. A quantitative method to measure surface charge density on a nanometer scale has been established. The redistribution of mobile surface ions has been visualized for the first time by the EFM on a submicron scale. It has been shown that the drift in the saturation current observed on the open gate field effect transistor is due to the migration of mobile surface ions under lateral fields. Atomic ordering in GaInP, controlled either by growth temperature or by substrate misorientation, has been studied by the KPFM both in cross section and on the growth plane. It is shown that KPFM is capable of distinguishing ordered GaInP from disordered GaInP. The contrast is observed to depend on the applied ac amplitude used in the measurement. The experiments indicate that ordering in GaInP modifies the density and/or lifetime of the surface states.

  2. Electrostatic actuators for portable microfluidic systems

    NASA Astrophysics Data System (ADS)

    Tice, Joshua

    Both developed and developing nations have an urgent need to diagnose disease cheaply, reliably, and independently of centralized facilities. Microfulidic platforms are well-positioned to address the need for portable diagnostics, mainly due to their obvious advantage in size. However, most microfluidic methods rely on equipment outside of the chip either for driving fluid flow (e.g., syringe pumps) or for taking measurements (e.g., lasers or microscopes). The energy and space requirements of the whole system inhibit portability and contribute to costs. To capitalize on the strengths of microfluidic platforms and address the serious needs of society, system components need to be miniaturized. Also, miniaturization should be accomplished as simply as possible, considering that simplicity is usually requisite for achieving truly transformative technology. Herein, I attempt to address the issue of controlling fluid flow in portable microfluidic systems. I focus on systems that are driven by elastomer-based membrane valves, since these valves are inherently simple, yet they are capable of sophisticated fluid manipulation. Others have attempted to modify pneumatic microvalves for portable applications, e.g., by transitioning to electromagnetic, thermopneumatic, or piezoelectric actuation principles. However, none of these strategies maintain the proper balance of simplicity, functionality, and ease of integration. My research centers on electrostatic actuators, due to their conceptual simplicity and the efficacy of electrostatic forces on the microscale. To ensure easy integration with polymer-based systems, and to maintain simplicity in the fabrication procedure, the actuators were constructed solely from poly(dimethylsiloxane) and multi-walled carbon nanotubes. In addition, the actuators were fabricated exclusively with soft-lithographic techniques. A mathematical model was developed to identify actuator parameters compatible with soft-lithography, and also to

  3. Multiple magnetic microrobot control using electrostatic anchoring

    NASA Astrophysics Data System (ADS)

    Pawashe, Chytra; Floyd, Steven; Sitti, Metin

    2009-04-01

    Addressing power and control to individual untethered microrobots is a challenge for small-scale robotics. We present a 250×130×100 μm3 magnetic robot wirelessly driven by pulsed external magnetic fields. An induced stick-slip motion results in translation speeds over 8 mm/s. Control of multiple robots is achieved by an array of addressable electrostatic anchoring pads on the surface, which selectively fixes microrobots, preventing translation. We demonstrate control of two microrobots in both uncoupled individual motion and coupled symmetric motion. An estimated anchoring force of 23.0 μN is necessary to effectively fix each microrobot.

  4. Electrostatic gating in carbon nanotube aptasensors

    NASA Astrophysics Data System (ADS)

    Zheng, Han Yue; Alsager, Omar A.; Zhu, Bicheng; Travas-Sejdic, Jadranka; Hodgkiss, Justin M.; Plank, Natalie O. V.

    2016-07-01

    Synthetic DNA aptamer receptors could boost the prospects of carbon nanotube (CNT)-based electronic biosensors if signal transduction can be understood and engineered. Here, we report CNT aptasensors for potassium ions that clearly demonstrate aptamer-induced electrostatic gating of electronic conduction. The CNT network devices were fabricated on flexible substrates via a facile solution processing route and non-covalently functionalised with potassium binding aptamers. Monotonic increases in CNT conduction were observed in response to increasing potassium ion concentration, with a level of detection as low as 10 picomolar. The signal was shown to arise from a specific aptamer-target interaction that stabilises a G-quadruplex structure, bringing high negative charge density near the CNT channel. Electrostatic gating is established via the specificity and the sign of the current response, and by observing its suppression when higher ionic strength decreases the Debye length at the CNT-water interface. Sensitivity towards potassium and selectivity against other ions is demonstrated in both resistive mode and real time transistor mode measurements. The effective device architecture presented, along with the identification of clear response signatures, should inform the development of new electronic biosensors using the growing library of aptamer receptors.Synthetic DNA aptamer receptors could boost the prospects of carbon nanotube (CNT)-based electronic biosensors if signal transduction can be understood and engineered. Here, we report CNT aptasensors for potassium ions that clearly demonstrate aptamer-induced electrostatic gating of electronic conduction. The CNT network devices were fabricated on flexible substrates via a facile solution processing route and non-covalently functionalised with potassium binding aptamers. Monotonic increases in CNT conduction were observed in response to increasing potassium ion concentration, with a level of detection as low as 10

  5. Spiderweb deformation induced by electrostatically charged insects

    NASA Astrophysics Data System (ADS)

    Ortega-Jimenez, Victor Manuel; Dudley, Robert

    2013-07-01

    Capture success of spider webs has been associated with their microstructure, ornamentation, and wind-induced vibrations. Indirect evidence suggests that statically charged objects can attract silk thread, but web deformations induced by charged insects have not yet been described. Here, we show under laboratory conditions that electrostatically charged honeybees, green bottle flies, fruit flies, aphids, and also water drops falling near webs of cross-spiders (Araneus diadematus) induce rapid thread deformation that enhances the likelihood of physical contact, and thus of prey capture.

  6. DNA under Force: Mechanics, Electrostatics, and Hydration

    PubMed Central

    Li, Jingqiang; Wijeratne, Sithara S.; Qiu, Xiangyun; Kiang, Ching-Hwa

    2015-01-01

    Quantifying the basic intra- and inter-molecular forces of DNA has helped us to better understand and further predict the behavior of DNA. Single molecule technique elucidates the mechanics of DNA under applied external forces, sometimes under extreme forces. On the other hand, ensemble studies of DNA molecular force allow us to extend our understanding of DNA molecules under other forces such as electrostatic and hydration forces. Using a variety of techniques, we can have a comprehensive understanding of DNA molecular forces, which is crucial in unraveling the complex DNA functions in living cells as well as in designing a system that utilizes the unique properties of DNA in nanotechnology.

  7. Nonadiabatic transitions in electrostatically trapped ammonia molecules

    SciTech Connect

    Kirste, Moritz; Schnell, Melanie; Meijer, Gerard; Sartakov, Boris G.

    2009-05-15

    Nonadiabatic transitions are known to be major loss channels for atoms in magnetic traps but have thus far not been experimentally reported upon for trapped molecules. We have observed and quantified losses due to nonadiabatic transitions for three isotopologues of ammonia in electrostatic traps by comparing the trapping times in traps with a zero and a nonzero electric field at the center. Nonadiabatic transitions are seen to dominate the overall loss rate even for the present samples that are at relatively high temperatures of 30 mK. It is anticipated that losses due to nonadiabatic transitions in electric fields are omnipresent in ongoing experiments on cold molecules.

  8. GRADIO three-axis electrostatic accelerometers

    NASA Technical Reports Server (NTRS)

    Bernard, A.

    1987-01-01

    Dedicated accelerometers for satellite gravity gradiometry (GRADIO project) are described. The design profits from experience acquired with the CACTUS accelerometer payload of the satellite CASTOR-D5B and studies of highly accurate accelerometers for inertial navigation. The principle of operation, based on a three-axis electrostatic suspension of a cubic proof mass, is well suited for the measurements of accelerations less than 0.0001 m/sec/sec. A resolution better than 10 to the minus 11th power m/sec/sec/sq root Hz is expected.

  9. ELECTROSTATIC AIR CLEANING DEVICE AND METHOD

    DOEpatents

    Silverman, L.; Anderson, D.M.

    1961-07-18

    A method and apparatus for utilizing friction-charged particulate material from an aerosol are described. A bed of the plastic spheres is prepared, and the aerosol is passed upwardly through the bed at a rate just large enough to maintain the bed in a fluidized state wim over-all circulation of the balls. Wire members criss-crossing through the bed rub against the balls and maintain their surfaces with electrostatic charges. The particulate material in the aerosol adheres to the surfaces of the balls.

  10. Cascaded proton acceleration by collisionless electrostatic shock

    SciTech Connect

    Xu, T. J.; Shen, B. F. E-mail: zhxm@siom.ac.cn; Zhang, X. M. E-mail: zhxm@siom.ac.cn; Yi, L. Q.; Wang, W. P.; Zhang, L. G.; Xu, J. C.; Zhao, X. Y.; Shi, Y.; Liu, C.; Pei, Z. K.

    2015-07-15

    A new scheme for proton acceleration by cascaded collisionless electrostatic shock (CES) is proposed. By irradiating a foil target with a moderate high-intensity laser beam, a stable CES field can be induced, which is employed as the accelerating field for the booster stage of proton acceleration. The mechanism is studied through simulations and theoretical analysis, showing that a 55 MeV seed proton beam can be further accelerated to 265 MeV while keeping a good energy spread. This scheme offers a feasible approach to produce proton beams with energy of hundreds of MeV by existing available high-intensity laser facilities.

  11. Magnetospheric electrostatic emissions and cold plasma densities

    NASA Technical Reports Server (NTRS)

    Hubbard, R. F.; Birmingham, T. J.

    1978-01-01

    A synoptic study of electric wave, magnetometer, and plasma data from IMP-6 was carried out for times when banded electrostatic waves are observed between harmonics of the electron gyrofrequency in the earth's outer magnetosphere. Four separate classes of such waves were previously identified. The spatial and temporal occurrences of waves in each class are summarized here, as are correlations of occurrence with geomagnetic activity. Most importantly, associations between the observations of waves of different classes and the relative portions of cold and hot electrons present at the position of the spacecraft are established. Finally, evidence for the signature of the loss cone is sought in the plasma data.

  12. Surface Acoustic Wave Atomizer and Electrostatic Deposition

    NASA Astrophysics Data System (ADS)

    Yamagata, Yutaka

    A new methodology for fabricating thin film or micro patters of organic/bio material using surface acoustic wave (SAW) atomizer and electrostatic deposition is proposed and characteristics of atomization techniques are discussed in terms of drop size and atomization speed. Various types of SAW atomizer are compared with electrospray and conventional ultrasonic atomizers. It has been proved that SAW atomizers generate drops as small as electrospray and have very fast atomization speed. This technique is applied to fabrication of micro patterns of proteins. According to the result of immunoassay, the specific activity of immunoglobulin was preserved after deposition process.

  13. Surface acoustic wave atomizer and electrostatic deposition.

    PubMed

    Yamagata, Yutaka

    2010-01-01

    A new methodology for fabricating thin film or micro patters of organic/bio material using surface acoustic wave (SAW) atomizer and electrostatic deposition is proposed and characteristics of atomization techniques are discussed in terms of drop size and atomization speed. Various types of SAW atomizer are compared with electrospray and conventional ultrasonic atomizers. It has been proved that SAW atomizers generate drops as small as electrospray and have very fast atomization speed. This technique is applied to fabrication of micro patterns of proteins. According to the result of immunoassay, the specific activity of immunoglobulin was preserved after deposition process.

  14. Desensitizing nano powders to electrostatic discharge ignition

    SciTech Connect

    Steelman, Ryan; Clark, Billy; Pantoya, Michelle L.; Heaps, Ronald J.; Daniels, Michael A.

    2015-08-01

    Electrostatic discharge (ESD) is a main cause for ignition in powder media ranging from grain silos to fireworks. Nanoscale particles are orders of magnitude more ESD ignition sensitive than their micron scale counterparts. This study shows that at least 13 vol. % carbon nanotubes (CNT) added to nano-aluminum and nano-copper oxide particles (nAl + CuO) eliminates ESD ignition sensitivity. The CNT act as a conduit for electric energy and directs electric charge through the powder to desensitize the reactive mixture to ignition. For nanoparticles, the required CNT concentration for desensitizing ESD ignition acts as a diluent to quench energy propagation.

  15. Measurement of exciton correlations using electrostatic lattices

    NASA Astrophysics Data System (ADS)

    Remeika, M.; Leonard, J. R.; Dorow, C. J.; Fogler, M. M.; Butov, L. V.; Hanson, M.; Gossard, A. C.

    2015-09-01

    We present a method for determining correlations in a gas of indirect excitons in a semiconductor quantum well structure. The method involves subjecting the excitons to a periodic electrostatic potential that causes modulations of the exciton density and photoluminescence (PL). Experimentally measured amplitudes of energy and intensity modulations of exciton PL serve as an input to a theoretical estimate of the exciton correlation parameter and temperature. We also present a proof-of-principle demonstration of the method for determining the correlation parameter and discuss how its accuracy can be improved.

  16. A Low Cost Electrostatically Focused TWT

    NASA Technical Reports Server (NTRS)

    Vancil, Bernard K.; Wintucky, Edwin G.; Williams, W. D. (Technical Monitor)

    2002-01-01

    Ring-loop circuits are well known for their simplicity, low cost, compactness, low mass, high gain and efficiency and absence of backward wave oscillations. Peak powers over 20 kw have been achieved. They also have low harmonic output and excellent phase performance. We have developed a double ring-loop circuit that permits electrostatic focusing of an electron beam to at least 0.4 micro pervs. This eliminates the magnet stack and further lowers cost and weight. It permits glass rod fastening of circuit elements as well as gun and collector assemblies, as is done in cathode ray tubes. Using CRT construction techniques, the TWT can be built on automated equipment.

  17. Sharp boundary analysis of electrostatic flute modes

    SciTech Connect

    Lemons, D. S.

    1989-07-01

    A linear, electrostatic, stability analysis of a magnetized cross-fielddrifting plasma with a sharp boundary is presented. The analysis corrects anerror in a previously published sharp boundary theory (Phys. Fluids /bold 19/,882 (1976)) and extends another theory (Geophys. Res. Lett. /bold 14/, 60(1987)) to include finite electron mass and non-neutral perturbations. Theinstability's long wavelength structure is associated with the classical fluteinstability, while the peak of the growth rate curve, at much shorterwavelengths, is a Buneman-like instability.

  18. Test and Evaluation of a Pilot Two-Stage Precipitator for Jet Engine Test Cell Exhaust Gas Cleaning

    DTIC Science & Technology

    1976-04-01

    then available for emission control . A two- stage electrostatic precipitator was recommended as .j he most viable alternative to a concept then being...TEST AND EVALUATION OF A "PILOT TWO* STAGE PRECIPITATOR FOR JET ENGINE TEST CELL 0 EXHAUST GA, S CLEANING C44 NAVAL AIR REWORK FACILITY NAVAL AIR...is the release you requested in your telephone conversation of 20 July 1976 with the undersigned. Yourn very tru~ly, Head Specifications Branch a 21

  19. Excitation of electrostatic waves in the electron cyclotron frequency range during magnetic reconnection in laboratory overdense plasmas

    SciTech Connect

    Kuwahata, A.; Igami, H.; Kawamori, E.; Kogi, Y.; Inomoto, M.; Ono, Y.

    2014-10-15

    We report the observation of electromagnetic radiation at high harmonics of the electron cyclotron frequency that was considered to be converted from electrostatic waves called electron Bernstein waves (EBWs) during magnetic reconnection in laboratory overdense plasmas. The excitation of EBWs was attributed to the thermalization of electrons accelerated by the reconnection electric field around the X-point. The radiative process discussed here is an acceptable explanation for observed radio waves pulsation associated with major flares.

  20. Low background counting of 222Rn, 220Rn and 219Rn with electrostatic counters

    NASA Astrophysics Data System (ADS)

    Mong, Brian; EXO-200 Collaboration; nEXO Collaboration

    2014-09-01

    The radon counting technique based on electrostatic precipitation of progenies in gas followed by alpha spectroscopy has been applied to support the material selection programs of low background, neutrino and dark matter experiments with emphasis on EXO. An array of 8 counters operated by Laurentian University at SNOLAB and the Waste Isolation Pilot Plant have reached the sensitivity of 10 atoms/day in the uranium, thorium and actinium chains. Hardware improvements are underway to further increase the capacity and sensitivity in support of nEXO. The radon counting technique based on electrostatic precipitation of progenies in gas followed by alpha spectroscopy has been applied to support the material selection programs of low background, neutrino and dark matter experiments with emphasis on EXO. An array of 8 counters operated by Laurentian University at SNOLAB and the Waste Isolation Pilot Plant have reached the sensitivity of 10 atoms/day in the uranium, thorium and actinium chains. Hardware improvements are underway to further increase the capacity and sensitivity in support of nEXO. Supported by NSERC Project Grants ``Search for Double Beta Decay with EXO.''

  1. Precipitation hardening austenitic superalloys

    DOEpatents

    Korenko, Michael K.

    1985-01-01

    Precipitation hardening, austenitic type superalloys are described. These alloys contain 0.5 to 1.5 weight percent silicon in combination with about 0.05 to 0.5 weight percent of a post irradiation ductility enhancing agent selected from the group of hafnium, yttrium, lanthanum and scandium, alone or in combination with each other. In addition, when hafnium or yttrium are selected, reductions in irradiation induced swelling have been noted.

  2. Uncertainties in Arctic Precipitation

    NASA Astrophysics Data System (ADS)

    Majhi, I.; Alexeev, V. A.; Cherry, J. E.; Cohen, J. L.; Groisman, P. Y.

    2012-12-01

    Arctic precipitation is riddled with measurement biases; to address the problem is imperative. Our study focuses on comparison of various datasets and analyzing their biases for the region of Siberia and caution that is needed when using them. Five sources of data were used ranging from NOAA's product (RAW, Bogdanova's correction), Yang's correction technique and two reanalysis products (ERA-Interim and NCEP). The reanalysis dataset performed better for some months in comparison to Yang's product, which tends to overestimate precipitation, and the raw dataset, which tends to underestimate. The sources of bias vary from topography, to wind, to missing data .The final three products chosen show higher biases during the winter and spring season. Emphasis on equations which incorporate blizzards, blowing snow and higher wind speed is necessary for regions which are influenced by any or all of these factors; Bogdanova's correction technique is the most robust of all the datasets analyzed and gives the most reasonable results. One of our future goals is to analyze the impact of precipitation uncertainties on water budget analysis for the Siberian Rivers.

  3. Electrostatic particle trap for ion beam sputter deposition

    DOEpatents

    Vernon, Stephen P.; Burkhart, Scott C.

    2002-01-01

    A method and apparatus for the interception and trapping of or reflection of charged particulate matter generated in ion beam sputter deposition. The apparatus involves an electrostatic particle trap which generates electrostatic fields in the vicinity of the substrate on which target material is being deposited. The electrostatic particle trap consists of an array of electrode surfaces, each maintained at an electrostatic potential, and with their surfaces parallel or perpendicular to the surface of the substrate. The method involves interception and trapping of or reflection of charged particles achieved by generating electrostatic fields in the vicinity of the substrate, and configuring the fields to force the charged particulate material away from the substrate. The electrostatic charged particle trap enables prevention of charged particles from being deposited on the substrate thereby enabling the deposition of extremely low defect density films, such as required for reflective masks of an extreme ultraviolet lithography (EUVL) system.

  4. Elasticity and Electrostatics of Plectonemic DNA

    PubMed Central

    Clauvelin, N.; Audoly, B.; Neukirch, S.

    2009-01-01

    We present a self-contained theory for the mechanical response of DNA in single molecule experiments. Our model is based on a one-dimensional continuum description of the DNA molecule and accounts both for its elasticity and for DNA-DNA electrostatic interactions. We consider the classical loading geometry used in experiments where one end of the molecule is attached to a substrate and the other one is pulled by a tensile force and twisted by a given number of turns. We focus on configurations relevant to the limit of a large number of turns, which are made up of two phases, one with linear DNA and the other one with superhelical DNA. The model takes into account thermal fluctuations in the linear phase and electrostatic interactions in the superhelical phase. The values of the torsional stress, of the supercoiling radius and angle, and key features of the experimental extension-rotation curves, namely the slope of the linear region and thermal buckling threshold, are predicted. They are found in good agreement with experimental data. PMID:19413977

  5. Electrostatic gating in carbon nanotube aptasensors.

    PubMed

    Zheng, Han Yue; Alsager, Omar A; Zhu, Bicheng; Travas-Sejdic, Jadranka; Hodgkiss, Justin M; Plank, Natalie O V

    2016-07-14

    Synthetic DNA aptamer receptors could boost the prospects of carbon nanotube (CNT)-based electronic biosensors if signal transduction can be understood and engineered. Here, we report CNT aptasensors for potassium ions that clearly demonstrate aptamer-induced electrostatic gating of electronic conduction. The CNT network devices were fabricated on flexible substrates via a facile solution processing route and non-covalently functionalised with potassium binding aptamers. Monotonic increases in CNT conduction were observed in response to increasing potassium ion concentration, with a level of detection as low as 10 picomolar. The signal was shown to arise from a specific aptamer-target interaction that stabilises a G-quadruplex structure, bringing high negative charge density near the CNT channel. Electrostatic gating is established via the specificity and the sign of the current response, and by observing its suppression when higher ionic strength decreases the Debye length at the CNT-water interface. Sensitivity towards potassium and selectivity against other ions is demonstrated in both resistive mode and real time transistor mode measurements. The effective device architecture presented, along with the identification of clear response signatures, should inform the development of new electronic biosensors using the growing library of aptamer receptors.

  6. Ion beam probing of electrostatic fields

    NASA Technical Reports Server (NTRS)

    Persson, H.

    1979-01-01

    The determination of a cylindrically symmetric, time-independent electrostatic potential V in a magnetic field B with the same symmetry by measurements of the deflection of a primary beam of ions is analyzed and substantiated by examples. Special attention is given to the requirements on canonical angular momentum and total energy set by an arbitrary, nonmonotone V, to scaling laws obtained by normalization, and to the analogy with ionospheric sounding. The inversion procedure with the Abel analysis of an equivalent problem with a one-dimensional fictitious potential is used in a numerical experiment with application to the NASA Lewis Modified Penning Discharge. The determination of V from a study of secondary beams of ions with increased charge produced by hot plasma electrons is also analyzed, both from a general point of view and with application to the NASA Lewis SUMMA experiment. Simple formulas and geometrical constructions are given for the minimum energy necessary to reach the axis, the whole plasma, and any point in the magnetic field. The common, simplifying assumption that V is a small perturbation is critically and constructively analyzed; an iteration scheme for successively correcting the orbits and points of ionization for the electrostatic potential is suggested.

  7. Electrostatic control of thermoelectricity in molecular junctions.

    PubMed

    Kim, Youngsang; Jeong, Wonho; Kim, Kyeongtae; Lee, Woochul; Reddy, Pramod

    2014-11-01

    Molecular junctions hold significant promise for efficient and high-power-output thermoelectric energy conversion. Recent experiments have probed the thermoelectric properties of molecular junctions. However, electrostatic control of thermoelectric properties via a gate electrode has not been possible due to technical challenges in creating temperature differentials in three-terminal devices. Here, we show that extremely large temperature gradients (exceeding 1 × 10(9) K m(-1)) can be established in nanoscale gaps bridged by molecules, while simultaneously controlling their electronic structure via a gate electrode. Using this platform, we study prototypical Au-biphenyl-4,4'-dithiol-Au and Au-fullerene-Au junctions to demonstrate that the Seebeck coefficient and the electrical conductance of molecular junctions can be simultaneously increased by electrostatic control. Moreover, from our studies of fullerene junctions, we show that thermoelectric properties can be significantly enhanced when the dominant transport orbital is located close to the chemical potential (Fermi level) of the electrodes. These results illustrate the intimate relationship between the thermoelectric properties and charge transmission characteristics of molecular junctions and should enable systematic exploration of the recent computational predictions that promise extremely efficient thermoelectric energy conversion in molecular junctions.

  8. Electrostatic self-assembly of biomolecules

    NASA Astrophysics Data System (ADS)

    Olvera de La Cruz, Monica

    2015-03-01

    Charged filaments and membranes are natural structures abundant in cell media. In this talk we discuss the assembly of amphiphiles into biocompatible fibers, ribbons and membranes. We describe one- and two-dimensional assemblies that undergo re-entrant transitions in crystalline packing in response to changes in the solution pH and/or salt concentration resulting in different mesoscale morphologies and properties. In the case of one-dimensional structures, we discuss self-assembled amphiphiles into highly charged nanofibers in water that order into two-dimensional crystals. These fibers of about 6 nm cross-sectional diameter form crystalline arrays with inter-fiber spacings of up to 130 nm. Solution concentration and temperature can be adjusted to control the inter-fiber spacings. The addition of salt destroys crystal packing, indicating that electrostatic repulsions are necessary for the observed ordering. We describe the crystallization of bundles of filament networks interacting via long-range repulsions in confinement by a phenomenological model. Two distinct crystallization mechanisms in the short and large screening length regimes are discussed and the phase diagram is obtained. Simulation of large bundles predicts the existence of topological defects among bundled filaments. Crystallization processes driven by electrostatic attractions are also discussed. Funded by Center for Bio-Inspired Energy Science (CBES), which is an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Award Number DE-SC0000989.

  9. Microscopic models for bridging electrostatics and currents

    NASA Astrophysics Data System (ADS)

    Borghi, L.; DeAmbrosis, A.; Mascheretti, P.

    2007-03-01

    A teaching sequence based on the use of microscopic models to link electrostatic phenomena with direct currents is presented. The sequence, devised for high school students, was designed after initial work carried out with student teachers attending a school of specialization for teaching physics at high school, at the University of Pavia. The results obtained with them are briefly presented, because they directed our steps for the development of the teaching sequence. For both the design of the experiments and their interpretation, we drew inspiration from the original works of Alessandro Volta; in addition, a structural model based on the particular role of electrons as elementary charges both in electrostatic phenomena and in currents was proposed. The teaching sequence starts from experiments on charging objects by rubbing and by induction, and engages students in constructing microscopic models to interpret their observations. By using these models and by closely examining the ideas of tension and capacitance, the students acknowledge that a charging (or discharging) process is due to the motion of electrons that, albeit for short time intervals, represent a current. Finally, they are made to see that the same happens in transients of direct current circuits.

  10. Electrostatic Confinement of Charged Particle Beams

    NASA Astrophysics Data System (ADS)

    Pacheco, Jose; Weathers, Duncan; Ordonez, Carlos

    2009-04-01

    Many experiments rely on the confinement of charged particles. Examples of these experiments range from fusion studies to antiproton-positron studies for antihydrogen production. Researchers have already developed a variety of techniques for controlling and trapping charged particles. Examples of systems devised for such purposes include electrostatic traps in the form of a cavity [1],[2] or in the form of a storage ring like ELISA [3]. For this project, we are pursuing a different approach [4], which relies on a purely electrostatic environment for ion confinement. This system consists of a periodic electrode configuration of cylindrical symmetry that acts to confine an ion beam in the radial direction. In this manner, it is expected that long particle lifetimes inside the trap will be achieved, and that the system will have an inherent scalability to different ion energy. Results obtained from simulation of the proposed system will be presented and discussed along with a brief overview of the steps taken to develop a laboratory prototype. [1] M. Dahan et al., Rev. Sci. Instr. 69 (1998) 76. [2] H. F. Krause et al., American Institute of Physics. CAARI 16^th Int'l Conf. (2001). [3] S.P. Moller et al., Proc. of the 1997 Particle Accelerator Conference. vol 1. pp 1027-1029. Vancouver, Canada. May 1997. [4] J.R. Correa et al., Nucl. Instr. and Meth. In Phys. Res. B 241 (2005) 909-912.

  11. Designing and operating electrostatically driven microengines

    SciTech Connect

    Rodgers, M.S.; Sniegowski, J.J.; Miller, S.L.; LaVigne, G.F.

    1998-02-01

    Microelectromechanical engines that convert the linear outputs from dual orthogonal electrostatic actuators to rotary motion were first developed in 1993. Referred to as microengines, these early devices demonstrated the potential of microelectromechanical technology, but, as expected from any first-of-its-kind device, were not yet optimized. Yield was relatively low, and the 10 micronewtons of force generated by the actuators was not always enough to ensure reliable operation. Since initial development, these engines have undergone a continuous series of significant improvements on three separate fronts: design, fabrication, and electrical activation. Although all three areas will be discussed, emphasis will be on aspects related to mechanical design and generation of the electrical waveforms used to drive these devices. Microtransmissions that dramatically increase torque will also be discussed. Electrostatically driven microengines can be operated at hundreds of thousands of revolutions per minute making large gear reduction ratios feasible; overall ratios of 3,000,000:1 have been successfully demonstrated. Today`s microengines have evolved into high endurance (one test device has seen over 7,000,000,000 revolutions), high yield, robust devices that have become the primary actuation source for MicroElectroMechanical Systems (MEMS) at Sandia National Laboratories.

  12. Development of Electrostatically Clean Solar Array Panels

    NASA Technical Reports Server (NTRS)

    Stern, Theodore G.

    2000-01-01

    Certain missions require Electrostatically Clean Solar Array (ECSA) panels to establish a favorable environment for the operation of sensitive scientific instruments. The objective of this program was to demonstrate the feasibility of an ECSA panel that minimizes panel surface potential below 100mV in LEO and GEO charged particle environments, prevents exposure of solar cell voltage and panel insulating surfaces to the ambient environment, and provides an equipotential, grounded structure surrounding the entire panel. An ECSA panel design was developed that uses a Front Side Aperture-Shield (FSA) that covers all inter-cell areas with a single graphite composite laminate, composite edge clips for connecting the FSA to the panel substrate, and built-in tabs that interconnect the FSA to conductive coated coverglasses using a conductive adhesive. Analysis indicated the ability of the design to meet the ECSA requirements. Qualification coupons and a 0.5m x 0.5m prototype panel were fabricated and tested for photovoltaic performance and electrical grounding before and after exposure to acoustic and thermal cycling environments. The results show the feasibility of achieving electrostatic cleanliness with a small penalty in mass, photovoltaic performance and cost, with a design is structurally robust and compatible with a wide range of current solar panel technologies.

  13. Dimer packings with gaps and electrostatics

    PubMed Central

    Ciucu, Mihai

    2008-01-01

    Fisher and Stephenson conjectured in 1963 that the correlation function (defined by dimer packings) of two unit holes on the square lattice is rotationally invariant in the limit of large separation between the holes. We consider the same problem on the hexagonal lattice, extend it to an arbitrary finite collection of holes, and present an explicit conjectural answer. In recent work we managed to prove this conjecture in two fairly general cases. The quantity giving the answer can be regarded as the exponential of the negative of the two-dimensional electrostatic energy of a system of charges naturally associated with the holes. We further develop this analogy to electrostatics by presenting two different natural ways to define a field in our setup, and showing that both lead to the electric field, in the limit of large separations between the holes. For one of the fields, this is also stated as a limit shape theorem for random surfaces, with the continuum limit being a sum of helicoids. We conclude by explaining the relationship of our results to previous results in the physics literature on spin correlations in the Ising model.

  14. Long range electrostatic forces in ionic liquids.

    PubMed

    Gebbie, Matthew A; Smith, Alexander M; Dobbs, Howard A; Lee, Alpha A; Warr, Gregory G; Banquy, Xavier; Valtiner, Markus; Rutland, Mark W; Israelachvili, Jacob N; Perkin, Susan; Atkin, Rob

    2017-01-19

    Ionic liquids are pure salts that are liquid under ambient conditions. As liquids composed solely of ions, the scientific consensus has been that ionic liquids have exceedingly high ionic strengths and thus very short Debye screening lengths. However, several recent experiments from laboratories around the world have reported data for the approach of two surfaces separated by ionic liquids which revealed remarkable long range forces that appear to be electrostatic in origin. Evidence has accumulated demonstrating long range surface forces for several different combinations of ionic liquids and electrically charged surfaces, as well as for concentrated mixtures of inorganic salts in solvent. The original interpretation of these forces, that ionic liquids could be envisioned as "dilute electrolytes," was controversial, and the origin of long range forces in ionic liquids remains the subject of discussion. Here we seek to collate and examine the evidence for long range surface forces in ionic liquids, identify key outstanding questions, and explore possible mechanisms underlying the origin of these long range forces. Long range surface forces in ionic liquids and other highly concentrated electrolytes hold diverse implications from designing ionic liquids for energy storage applications to rationalizing electrostatic correlations in biological self-assembly.

  15. New Method for Quantifying Ignition Sensitivity from Electrostatic Discharge

    DTIC Science & Technology

    2015-05-01

    ARL-TN-0675 ● MAY 2015 US Army Research Laboratory New Method for Quantifying Ignition Sensitivity from Electrostatic Discharge...Research Laboratory New Method for Quantifying Ignition Sensitivity from Electrostatic Discharge by Eric S Collins Oak Ridge Associated...Ignition Sensitivity from Electrostatic Discharge 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Eric S Collins

  16. Precipitation Indices Low Countries

    NASA Astrophysics Data System (ADS)

    van Engelen, A. F. V.; Ynsen, F.; Buisman, J.; van der Schrier, G.

    2009-09-01

    Since 1995, KNMI published a series of books(1), presenting an annual reconstruction of weather and climate in the Low Countries, covering the period AD 763-present, or roughly, the last millennium. The reconstructions are based on the interpretation of documentary sources predominantly and comparison with other proxies and instrumental observations. The series also comprises a number of classifications. Amongst them annual classifications for winter and summer temperature and for winter and summer dryness-wetness. The classification of temperature have been reworked into peer reviewed (2) series (AD 1000-present) of seasonal temperatures and temperature indices, the so called LCT (Low Countries Temperature) series, now incorporated in the Millennium databases. Recently we started a study to convert the dryness-wetness classifications into a series of precipitation; the so called LCP (Low Countries Precipitation) series. A brief outline is given here of the applied methodology and preliminary results. The WMO definition for meteorological drought has been followed being that a period is called wet respectively dry when the amount of precipitation is considerable more respectively less than usual (normal). To gain a more quantitative insight for four locations, geographically spread over the Low Countries area (De Bilt, Vlissingen, Maastricht and Uccle), we analysed the statistics of daily precipitation series, covering the period 1900-present. This brought us to the following definition, valid for the Low Countries: A period is considered as (very) dry respectively (very) wet if over a continuous period of at least 60 days (~two months) cq 90 days (~three months) on at least two out of the four locations 50% less resp. 50% more than the normal amount for the location (based on the 1961-1990 normal period) has been measured. This results into the following classification into five drought classes hat could be applied to non instrumental observations: Very wet period

  17. Magnetite seeded precipitation of phosphate.

    PubMed

    Karapinar, Nuray; Hoffmann, Erhard; Hahn, Hermann H

    2004-07-01

    Seeded precipitation of Ca phosphate on magnetite mineral (Fe3O4) surfaces was investigated using a Jar Test system in supersaturated solutions at 20 degrees C and ionic strength 0.01 mol l(-1) with relative super saturation, 12.0-20.0 for HAP. pH of the solution, initial phosphorus concentration and molar Ca/P ratio were investigated as the main parameters, which effect the seeded precipitation of Ca phosphate. Results showed that there is no pronounced effect of magnetite seed, neither positive nor negative on the amount of calcium phosphate precipitation. pH was found to be the main parameter that determines the phosphate precipitated onto the seed surface. Increasing of the pH of precipitation reaction was resulted in the decrease in percentage amount of phosphate precipitated onto seed surfaces to total precipitation (magnetite seeded precipitation efficiency). It was concluded that the pH dependence of magnetite-seeded precipitation should be considered in the light of its effect on the supersaturated conditions of solution. Saturation index (SI) of solution with respect to the precipitate phase was considered the driving force for the precipitation. A simulation programme PHREEQC (Version 2) was employed to calculate the Saturation-index with respect to hydroxyapatite (HAP) of the chemically defined precipitation system. It was found a good relationship between SI of solution with respect to HAP and the magnetite seeded precipitation efficiency, a second order polynomial function. Results showed that more favorable solution conditions for precipitation (higher SI values of solution) causes homogenous nucleation whereas heterogeneous nucleation led to a higher magnetite seeded precipitation efficiency.

  18. Measurement of Global Precipitation

    NASA Technical Reports Server (NTRS)

    Flaming, Gilbert Mark

    2004-01-01

    The Global Precipitation Measurement (GPM) Program is an international cooperative effort whose objectives are to (a) obtain increased understanding of rainfall processes, and (b) make frequent rainfall measurements on a global basis. The National Aeronautics and Space Administration (NASA) of the United States and the Japanese Aviation and Exploration Agency (JAXA) have entered into a cooperative agreement for the formulation and development of GPM. This agreement is a continuation of the partnership that developed the highly successful Tropical Rainfall Measuring Mission (TRMM) that was launched in November 1997; this mission continues to provide valuable scientific and meteorological information on rainfall and the associated processes. International collaboration on GPM from other space agencies has been solicited, and discussions regarding their participation are currently in progress. NASA has taken lead responsibility for the planning and formulation of GPM, Key elements of the Program to be provided by NASA include a Core satellite bus instrumented with a multi-channel microwave radiometer, a Ground Validation System and a ground-based Precipitation Processing System (PPS). JAXA will provide a Dual-frequency Precipitation Radar for installation on the Core satellite and launch services. Other United States agencies and international partners may participate in a number of ways, such as providing rainfall measurements obtained from their own national space-borne platforms, providing local rainfall measurements to support the ground validation activities, or providing hardware or launch services for GPM constellation spacecraft. This paper will present an overview of the current planning for the GPM Program, and discuss in more detail the status of the lead author's primary responsibility, development and acquisition of the GPM Microwave Imager.

  19. Acceptance of tinnitus: validation of the tinnitus acceptance questionnaire.

    PubMed

    Weise, Cornelia; Kleinstäuber, Maria; Hesser, Hugo; Westin, Vendela Zetterqvist; Andersson, Gerhard

    2013-01-01

    The concept of acceptance has recently received growing attention within tinnitus research due to the fact that tinnitus acceptance is one of the major targets of psychotherapeutic treatments. Accordingly, acceptance-based treatments will most likely be increasingly offered to tinnitus patients and assessments of acceptance-related behaviours will thus be needed. The current study investigated the factorial structure of the Tinnitus Acceptance Questionnaire (TAQ) and the role of tinnitus acceptance as mediating link between sound perception (i.e. subjective loudness of tinnitus) and tinnitus distress. In total, 424 patients with chronic tinnitus completed the TAQ and validated measures of tinnitus distress, anxiety, and depression online. Confirmatory factor analysis provided support to a good fit of the data to the hypothesised bifactor model (root-mean-square-error of approximation = .065; Comparative Fit Index = .974; Tucker-Lewis Index = .958; standardised root mean square residual = .032). In addition, mediation analysis, using a non-parametric joint coefficient approach, revealed that tinnitus-specific acceptance partially mediated the relation between subjective tinnitus loudness and tinnitus distress (path ab = 5.96; 95% CI: 4.49, 7.69). In a multiple mediator model, tinnitus acceptance had a significantly stronger indirect effect than anxiety. The results confirm the factorial structure of the TAQ and suggest the importance of a general acceptance factor that contributes important unique variance beyond that of the first-order factors activity engagement and tinnitus suppression. Tinnitus acceptance as measured with the TAQ is proposed to be a key construct in tinnitus research and should be further implemented into treatment concepts to reduce tinnitus distress.

  20. Electrostatically Driven Granular Media: Phase Transitions, Patterns and Vortices

    NASA Astrophysics Data System (ADS)

    Aranson, Igor

    2003-03-01

    Large ensembles of small particles display fascinating collective behavior when they acquire an electric charge and respond to competing long-range electromagnetic and short-range contact forces. Many industrial technologies face the challenge of assembling and separating such single- or multi-component micro and nano- size ensembles. The dynamics of conducting microparticles in strong electric field in the air or in deep vacuum was studied in Refs. [1,2]. Phase transitions and clustering instability of the electrostatically driven granular gas were found. A continuum model for the phase separation and coarsening in was formulated in terms of a Ginzburg-Landau equation subject to conservation of the total number of grains. In the regime of well-developed clusters, the continuum model is used to derive "sharp-interface" equations that govern the dynamics of the interphase boundary. The situation is remarkably different when the cell is filled with poorly conducting liquid (toluene-ethanol mixute). We have found that metallic particles form a rich variety of phases not observed in the air-filled cell. These phases include static precipitates: honeycombs lattices and Wigner crystals; and novel dynamic condensates: toroidal vortices and pulsating rings. The observed phenomena are attributed to interaction between particles and electro-hydrodynamic flows produced by the action of the electric field on ionic charges in the bulk of liquid. 1. I.S. Aranson, D. Blair, V.A. Kalatsky, G.W. Crabtree, W.-K. Kwok, V.M. Vinokur, and U.Welp, Phys. Rev. Lett. 84, 3306 (2000) 2. I.S. Aranson, B. Meerson, P.V. Sasorov, and V.M. Vinokur, Phys. Rev. Lett. 88, 204301 (2002)

  1. DISSOLUTION OF LANTHANUM FLUORIDE PRECIPITATES

    DOEpatents

    Fries, B.A.

    1959-11-10

    A plutonium separatory ore concentration procedure involving the use of a fluoride type of carrier is presented. An improvement is given in the derivation step in the process for plutonium recovery by carrier precipitation of plutonium values from solution with a lanthanum fluoride carrier precipitate and subsequent derivation from the resulting plutonium bearing carrier precipitate of an aqueous acidic plutonium-containing solution. The carrier precipitate is contacted with a concentrated aqueous solution of potassium carbonate to effect dissolution therein of at least a part of the precipitate, including the plutonium values. Any remaining precipitate is separated from the resulting solution and dissolves in an aqueous solution containing at least 20% by weight of potassium carbonate. The reacting solutions are combined, and an alkali metal hydroxide added to a concentration of at least 2N to precipitate lanthanum hydroxide concomitantly carrying plutonium values.

  2. Precipitation Extremes Under Climate Change.

    PubMed

    O'Gorman, Paul A

    The response of precipitation extremes to climate change is considered using results from theory, modeling, and observations, with a focus on the physical factors that control the response. Observations and simulations with climate models show that precipitation extremes intensify in response to a warming climate. However, the sensitivity of precipitation extremes to warming remains uncertain when convection is important, and it may be higher in the tropics than the extratropics. Several physical contributions govern the response of precipitation extremes. The thermodynamic contribution is robust and well understood, but theoretical understanding of the microphysical and dynamical contributions is still being developed. Orographic precipitation extremes and snowfall extremes respond differently from other precipitation extremes and require particular attention. Outstanding research challenges include the influence of mesoscale convective organization, the dependence on the duration considered, and the need to better constrain the sensitivity of tropical precipitation extremes to warming.

  3. Cone penetrometer acceptance test report

    SciTech Connect

    Boechler, G.N.

    1996-09-19

    This Acceptance Test Report (ATR) documents the results of acceptance test procedure WHC-SD-WM-ATR-151. Included in this report is a summary of the tests, the results and issues, the signature and sign- off ATP pages, and a summarized table of the specification vs. ATP section that satisfied the specification.

  4. A re-examination of the projected subtropical precipitation decline

    NASA Astrophysics Data System (ADS)

    He, Jie; Soden, Brian J.

    2017-01-01

    A large-scale precipitation decline in the subtropics is a widely accepted projection of future climate change, but its causes and implications are uncertain. Two mechanisms are commonly used to explain the large-scale subtropical precipitation decline: an amplification of moisture export due to the increase in moisture and a poleward shift of subtropical subsidence associated with the poleward expansion of the Hadley cell. In an idealized experiment with abrupt CO2 increase, we find that the subtropical precipitation decline forms primarily in the fast adjustment to CO2 forcing during which neither of the two proposed mechanisms exists. Permitting the increase in moisture and the Hadley cell expansion does not substantially change the characteristics of the large-scale subtropical precipitation decline. This precipitation change should be interpreted as a response to the land-sea warming contrast, the direct radiative forcing of CO2 and, in certain regions, the pattern of SST changes. Moreover, the subtropical precipitation decline is projected predominately over oceans. Over subtropical land regions, the precipitation decline is muted or even reversed by the land-sea warming contrast.

  5. A teaching proposal on electrostatics based on the history of science through the reading of historical texts and argumentative discussions

    NASA Astrophysics Data System (ADS)

    Castells, Marina; Konstantinidou, Aikaterini; Cerveró, Josep M.

    2016-05-01

    Researches on electrostatics' conceptions found that students have ideas and conceptions that disagree with the scientific models and that might explain students' learning difficulties. To favour the change of student's ideas and conceptions, a teaching sequence that relies on a historical study of electrostatics is proposed. It begins with an exploration of electrostatics phenomena that students would do with everyday materials. About these phenomena they must draw their own explanations that will be shared and discussed in the class. The teacher will collect and summarize the ideas and explanations which are nearer the history of science. A brief history of electrostatics is introduced then, and some texts from scientists are used in an activity role-play-debate type in which the "supporters of a single fluid" and "supporters of two fluids" have to present arguments for their model and/or against the other model to explain the phenomena observed in the exploration phase. In the following, students will read texts related to science applications, the main aim of this activity is to relate electrostatics phenomena with current electricity. The first text explains how Franklin understood the nature of the lightning and the lightning rod and the second is a chapter of a roman about one historical episode situated in the Barcelona of the XVIII Century. Students will use the historical models of one and of two fluids to explain these two phenomena, and will compare them with the scientific explanation of the "accepted" science of nowadays introduced by the teacher. With this type of teaching proposal, conceptual aspect of electrostatics will be learnt, but also the students will learn about the nature and history of science and culture, as well as about the practice of argumentation.

  6. Friction coefficient dependence on electrostatic tribocharging

    NASA Astrophysics Data System (ADS)

    Burgo, Thiago A. L.; Silva, Cristiane A.; Balestrin, Lia B. S.; Galembeck, Fernando

    2013-08-01

    Friction between dielectric surfaces produces patterns of fixed, stable electric charges that in turn contribute electrostatic components to surface interactions between the contacting solids. The literature presents a wealth of information on the electronic contributions to friction in metals and semiconductors but the effect of triboelectricity on friction coefficients of dielectrics is as yet poorly defined and understood. In this work, friction coefficients were measured on tribocharged polytetrafluoroethylene (PTFE), using three different techniques. As a result, friction coefficients at the macro- and nanoscales increase many-fold when PTFE surfaces are tribocharged, but this effect is eliminated by silanization of glass spheres rolling on PTFE. In conclusion, tribocharging may supersede all other contributions to macro- and nanoscale friction coefficients in PTFE and probably in other insulating polymers.

  7. Powder electrostatic enamelling of household appliances

    NASA Astrophysics Data System (ADS)

    Bragina, L.; Shalygina, O.; Kuryakin, N.; Annenkov, V.; Guzenko, N.; Kupriyanenko, K.; Hudyakov, V.; Landik, A.

    2011-12-01

    Principles and practices of contemporary resource and energy saving technology of powder electrostatic application (POESTA)of vitreous enamel coatings are described. Its technological, economic and ecological advantages over slip enamelling in household appliances manufacture are discussed. We develop the principles of synthesis of special glass frits with high electric resistivity for POESTA and discuss the results of studies aimed at the development and industrial implementation of ground, direct-on and coloured cover enamels for household appliances and direct-on thermally resistant chemically durable coatings with antibacterial effect for protection of inner tanks of water heaters. Finally, we describe the development of compositions for easy-to-clean, catalytic and pyrolytic coatings.

  8. Invited Review Article: The electrostatic plasma lens

    SciTech Connect

    Goncharov, Alexey

    2013-02-15

    The fundamental principles, experimental results, and potential applications of the electrostatic plasma lens for focusing and manipulating high-current, energetic, heavy ion beams are reviewed. First described almost 50 years ago, this optical beam device provides space charge neutralization of the ion beam within the lens volume, and thus provides an effective and unique tool for focusing high current beams where a high degree of neutralization is essential to prevent beam blow-up. Short and long lenses have been explored, and a lens in which the magnetic field is provided by rare-earth permanent magnets has been demonstrated. Applications include the use of this kind of optical tool for laboratory ion beam manipulation, high dose ion implantation, heavy ion accelerator injection, in heavy ion fusion, and other high technology.

  9. Turbulence in electrostatic ion acoustic shocks

    NASA Technical Reports Server (NTRS)

    Means, R. W.; Coroniti, F. V.; Wong, A. Y.; White, R. B.

    1973-01-01

    Three types of collisionless electrostatic ion acoustic shocks are investigated using a double plasma (DP) device: (1) laminar shocks; (2) small amplitude turbulent shocks in which the turbulence is confined to be upstream of the shock potential jump; and (3) large amplitude turbulent shocks in which the wave turbulence occurs throughout the shock transition. The wave turbulence is generated by ions which are reflected from the shock potential; linear theory spatial growth increments agree with experimental values. The experimental relationship between the shock Mach number and the shock potential is shown to be inconsistent with theoretical shock models which assume that the electrons are isothermal. Theoretical calculations which assume a trapped electron equation of a state and a turbulently flattened velocity distrubution function for the reflected ions yields a Mach number vs potential relationship in agreement with experiment.

  10. Electrostatic micromembrane actuator arrays as motion generator

    NASA Astrophysics Data System (ADS)

    Wu, X. T.; Hui, J.; Young, M.; Kayatta, P.; Wong, J.; Kennith, D.; Zhe, J.; Warde, C.

    2004-05-01

    A rigid-body motion generator based on an array of micromembrane actuators is described. Unlike previous microelectromechanical systems (MEMS) techniques, the architecture employs a large number (typically greater than 1000) of micron-sized (10-200 μm) membrane actuators to simultaneously generate the displacement of a large rigid body, such as a conventional optical mirror. For optical applications, the approach provides optical design freedom of MEMS mirrors by enabling large-aperture mirrors to be driven electrostatically by MEMS actuators. The micromembrane actuator arrays have been built using a stacked architecture similar to that employed in the Multiuser MEMS Process (MUMPS), and the motion transfer from the arrayed micron-sized actuators to macro-sized components was demonstrated.

  11. Multifractality in plasma edge electrostatic turbulence

    NASA Astrophysics Data System (ADS)

    Neto, C. Rodrigues; Guimarães-Filho, Z. O.; Caldas, I. L.; Nascimento, I. C.; Kuznetsov, Yu. K.

    2008-08-01

    Plasma edge turbulence in Tokamak Chauffage Alfvén Brésilien (TCABR) [R. M. O. Galvão et al., Plasma Phys. Contr. Fusion 43, 1181 (2001)] is investigated for multifractal properties of the fluctuating floating electrostatic potential measured by Langmuir probes. The multifractality in this signal is characterized by the full multifractal spectra determined by applying the wavelet transform modulus maxima. In this work, the dependence of the multifractal spectrum with the radial position is presented. The multifractality degree inside the plasma increases with the radial position reaching a maximum near the plasma edge and becoming almost constant in the scrape-off layer. Comparisons between these results with those obtained for random test time series with the same Hurst exponents and data length statistically confirm the reported multifractal behavior. Moreover, the persistence of these signals, characterized by their Hurst exponent, present radial profile similar to the deterministic component estimated from analysis based on dynamical recurrences.

  12. Controlling synaptotagmin activity by electrostatic screening.

    PubMed

    Park, Yongsoo; Hernandez, Javier M; van den Bogaart, Geert; Ahmed, Saheeb; Holt, Matthew; Riedel, Dietmar; Jahn, Reinhard

    2012-10-01

    Exocytosis of neurosecretory vesicles is mediated by the SNARE (soluble N-ethylmaleimide-sensitive factor attachment protein receptor) proteins syntaxin-1, synaptobrevin and SNAP-25, with synaptotagmin functioning as the major Ca(2+) sensor for triggering membrane fusion. Here we show that bovine chromaffin granules readily fuse with large unilamellar liposomes in a SNARE-dependent manner. Fusion is enhanced by Ca(2+), but only when the target liposomes contain phosphatidylinositol-4,5-bisphosphate and when polyphosphate anions, such as nucleotides or pyrophosphate, are present. Ca(2+)-dependent enhancement is mediated by endogenous synaptotagmin-1. Polyphosphates operate by an electrostatic mechanism that reverses an inactivating cis association of synaptotagmin-1 with its own membrane without affecting trans binding. Hence, the balancing of trans- and cis-membrane interactions of synaptotagmin-1 could be a crucial element in the pathway of Ca(2+)-dependent exocytosis.

  13. Electrostatic Discharge Effects on Thin Film Resistors

    NASA Technical Reports Server (NTRS)

    Sampson, Michael J.; Hull, Scott M.

    1999-01-01

    Recently, open circuit failures of individual elements in thin film resistor networks have been attributed to electrostatic discharge (ESD) effects. This paper will discuss the investigation that came to this conclusion and subsequent experimentation intended to characterize design factors that affect the sensitivity of resistor elements to ESD. The ESD testing was performed using the standard human body model simulation. Some of the design elements to be evaluated were: trace width, trace length (and thus width to length ratio), specific resistivity of the trace (ohms per square) and resistance value. However, once the experiments were in progress, it was realized that the ESD sensitivity of most of the complex patterns under evaluation was determined by other design and process factors such as trace shape and termination pad spacing. This paper includes pictorial examples of representative ESD failure sites, and provides some options for designing thin film resistors that are ESD resistant. The risks of ESD damage are assessed and handling precautions suggested.

  14. Electrostatic Modeling of Vacuum Insulator Triple Junctions

    SciTech Connect

    Tully, L K; Goerz, D A; Houck, T L; Javedani, J B

    2006-10-25

    Triple junctions are often initiation points for insulator flashover in pulsed power devices. The two-dimensional finite-element TriComp [1] modeling software suite was utilized for its electrostatic field modeling package to investigate electric field behavior in the anode and cathode triple junctions of a high voltage vacuum-insulator interface. TriComp enables simple extraction of values from a macroscopic solution for use as boundary conditions in a subset solution. Electric fields computed with this zoom capability correlate with theoretical analysis of the anode and cathode triple junctions within submicron distances for nominal electrode spacing of 1.0 cm. This paper will discuss the iterative zoom process with TriComp finite-element software and the corresponding theoretical verification of the results.

  15. Electrostatically gated membrane permeability in inorganic protocells

    NASA Astrophysics Data System (ADS)

    Li, Mei; Harbron, Rachel L.; Weaver, Jonathan V. M.; Binks, Bernard P.; Mann, Stephen

    2013-06-01

    Although several strategies are now available to produce functional microcompartments analogous to primitive cell-like structures, little progress has been made in generating protocell constructs with self-controlled membrane permeability. Here we describe the preparation of water-dispersible colloidosomes based on silica nanoparticles and delineated by a continuous semipermeable inorganic membrane capable of self-activated, electrostatically gated permeability. We use crosslinking and covalent grafting of a pH-responsive copolymer to generate an ultrathin elastic membrane that exhibits selective release and uptake of small molecules. This behaviour, which depends on the charge of the copolymer coronal layer, serves to trigger enzymatic dephosphorylation reactions specifically within the protocell aqueous interior. This system represents a step towards the design and construction of alternative types of artificial chemical cells and protocell models based on spontaneous processes of inorganic self-organization.

  16. Electrostatically gated membrane permeability in inorganic protocells.

    PubMed

    Li, Mei; Harbron, Rachel L; Weaver, Jonathan V M; Binks, Bernard P; Mann, Stephen

    2013-06-01

    Although several strategies are now available to produce functional microcompartments analogous to primitive cell-like structures, little progress has been made in generating protocell constructs with self-controlled membrane permeability. Here we describe the preparation of water-dispersible colloidosomes based on silica nanoparticles and delineated by a continuous semipermeable inorganic membrane capable of self-activated, electrostatically gated permeability. We use crosslinking and covalent grafting of a pH-responsive copolymer to generate an ultrathin elastic membrane that exhibits selective release and uptake of small molecules. This behaviour, which depends on the charge of the copolymer coronal layer, serves to trigger enzymatic dephosphorylation reactions specifically within the protocell aqueous interior. This system represents a step towards the design and construction of alternative types of artificial chemical cells and protocell models based on spontaneous processes of inorganic self-organization.

  17. Electrostatic Charging of the Pathfinder Rover

    NASA Technical Reports Server (NTRS)

    Siebert, Mark W.; Kolecki, Joseph C.

    1996-01-01

    The Mars Pathfinder mission will send a lander and a rover to the martian surface. Because of the extremely dry conditions on Mars, electrostatic charging of the rover is expected to occur as it moves about. Charge accumulation may result in high electrical potentials and discharge through the martian atmosphere. Such discharge could interfere with the operation of electrical elements on the rover. A strategy was sought to mitigate this charge accumulation as a precautionary measure. Ground tests were performed to demonstrate charging in laboratory conditions simulating the surface conditions expected at Mars. Tests showed that a rover wheel, driven at typical rover speeds, will accumulate electrical charge and develop significant electrical potentials (average observed, 110 volts). Measurements were made of wheel electrical potential, and wheel capacitance. From these quantities, the amount of absolute charge was estimated. An engineering solution was developed and recommended to mitigate charge accumulation. That solution has been implemented on the actual rover.

  18. Processes and applications of electrostatic fiber formation

    NASA Astrophysics Data System (ADS)

    Rutledge, Gregory C.

    2008-12-01

    'Electrospinning' is an electrohydrodynamic jetting process that enables the production of continuous fibers, tubes and wires with diameters as small as 10 nm. The process itself is dependent upon electrostatic interactions such as charge-charge repulsion and charge-field interaction. The interplay of charge repulsion, viscoelasticity and surface tension gives rise to interesting electrohydrodynamic phenomena that challenge fundamental understanding as well as practical implementation and quality control in the final fibers. The morphology and diameter of these fibers can be understood and controlled through manipulation of fluid properties and operating parameters. The fibers thus produced are illustrative of nanotechnology in a 1-dimensional form, and have inspired considerable activity in the research community into their potential applications. Proposed uses range from high performance filtration media and membranes, to sensors and actuators, to medical devices and drug delivery vehicles. Two examples, tissue scaffold engineering and superhydrophobicity, are illustrated here.

  19. Nonplanar electrostatic shock waves in dense plasmas

    SciTech Connect

    Masood, W.; Rizvi, H.

    2010-02-15

    Two-dimensional quantum ion acoustic shock waves (QIASWs) are studied in an unmagnetized plasma consisting of electrons and ions. In this regard, a nonplanar quantum Kadomtsev-Petviashvili-Burgers (QKPB) equation is derived using the small amplitude perturbation expansion method. Using the tangent hyperbolic method, an analytical solution of the planar QKPB equation is obtained and subsequently used as the initial profile to numerically solve the nonplanar QKPB equation. It is observed that the increasing number density (and correspondingly the quantum Bohm potential) and kinematic viscosity affect the propagation characteristics of the QIASW. The temporal evolution of the nonplanar QIASW is investigated both in Cartesian and polar planes and the results are discussed from the numerical stand point. The results of the present study may be applicable in the study of propagation of small amplitude localized electrostatic shock structures in dense astrophysical environments.

  20. Friction coefficient dependence on electrostatic tribocharging.

    PubMed

    Burgo, Thiago A L; Silva, Cristiane A; Balestrin, Lia B S; Galembeck, Fernando

    2013-01-01

    Friction between dielectric surfaces produces patterns of fixed, stable electric charges that in turn contribute electrostatic components to surface interactions between the contacting solids. The literature presents a wealth of information on the electronic contributions to friction in metals and semiconductors but the effect of triboelectricity on friction coefficients of dielectrics is as yet poorly defined and understood. In this work, friction coefficients were measured on tribocharged polytetrafluoroethylene (PTFE), using three different techniques. As a result, friction coefficients at the macro- and nanoscales increase many-fold when PTFE surfaces are tribocharged, but this effect is eliminated by silanization of glass spheres rolling on PTFE. In conclusion, tribocharging may supersede all other contributions to macro- and nanoscale friction coefficients in PTFE and probably in other insulating polymers.

  1. Probe Measurements of Electrostatic Fluctuations in LDX

    NASA Astrophysics Data System (ADS)

    Ortiz, E. E.; Mauel, M. E.; Garnier, D. T.; Hansen, A. K.; Levitt, B. J.; Kesner, J.; Boxer, A.; Ellsworth, J. L.; Karim, I.; Mahar, S.; Roach, A. H.; Zimmermann, M.

    2004-11-01

    Electrostatic fluctuations play an important role in the equilibrium and stability of a high-beta plasma confined in a dipolar magnetic field. Initial plasma experiments in LDX will use movable edge probes to measure plasma potential, plasma characteristics, and plasma mass flow. Three probe systems have been installed: a triple Langmuir probe (constructed of 1 cm long, 0.5 mm dia. tungsten wire probe tips), an emissive probe (constructed of 0.9 cm long, 1 mm dia. thoriated tungsten wire), and a Mach probe (constructed with two 0.7 cm long, 1.5 mm dia. tungsten wires). Each probe is mounted on an adjustable feed-through capable of scanning parameters along a 40 cm cord at the plasma edge. Initial measurements and interpretations from first plasma experiments will be presented.

  2. Electrode geometry for electrostatic generators and motors

    DOEpatents

    Post, Richard F.

    2016-02-23

    An electrostatic (ES) device is described with electrodes that improve its performance metrics. Devices include ES generators and ES motors, which are comprised of one or more stators (stationary members) and one or more rotors (rotatable members). The stator and rotors are configured as a pair of concentric cylindrical structures and aligned about a common axis. The stator and rotor are comprised of an ensemble of discrete, longitudinal electrodes, which are axially oriented in an annular arrangement. The shape of the electrodes described herein enables the ES device to function at voltages significantly greater than that of the existing art, resulting in devices with greater power-handling capability and overall efficiency. Electrode shapes include, but are not limited to, rods, corrugated sheets and emulations thereof.

  3. Electrostatic attraction between overall neutral surfaces.

    PubMed

    Adar, Ram M; Andelman, David; Diamant, Haim

    2016-08-01

    Two overall neutral surfaces with positively and negatively charged domains ("patches") have been shown in recent experiments to exhibit long-range attraction when immersed in an ionic solution. Motivated by the experiments, we calculate analytically the osmotic pressure between such surfaces within the Poisson-Boltzmann framework, using a variational principle for the surface-averaged free energy. The electrostatic potential, calculated beyond the linear Debye-Hückel theory, yields an overall attraction at large intersurface separations, over a wide range of the system's controlled length scales. In particular, the attraction is stronger and occurs at smaller separations for surface patches of larger size and charge density. In this large patch limit, we find that the attraction-repulsion crossover separation is inversely proportional to the square of the patch-charge density and to the Debye screening length.

  4. Electrostatic ion cyclotron velocity shear instability

    NASA Technical Reports Server (NTRS)

    Lemons, D. S.; Winske, D.; Gary, S. P.

    1992-01-01

    A local electrostatic dispersion equation is derived for a shear flow perpendicular to an ambient magnetic field, which includes all kinetic effects and involves only one important parameter. The dispersion equation is cast in the form of Gordeyev integrals and is solved numerically. Numerical solutions indicate that an ion cyclotron instability is excited. The instability occurs roughly at multiples of the ion cyclotron frequency (modified by the shear), with the growth rate or the individual harmonics overlapping in the wavenumber. At large values of the shear parameter, the instability is confined to long wavelengths, but at smaller shear, a second distinct branch at shorter wavelengths also appears. The properties of the instability obtained are compared with those obtained in the nonlocal limit by Ganguli et al. (1985, 1988).

  5. Aspects of electrostatics in BTZ geometries

    NASA Astrophysics Data System (ADS)

    Herrera, Y.; Hurovich, V.; Santillán, O.; Simeone, C.

    2015-10-01

    In the present paper the electrostatics of charges in nonrotating BTZ black hole and wormhole spacetimes is studied. Our attention is focused on the self-force of a point charge in the geometry, for which a regularization prescription based on the Haddamard Green function is employed. The differences between the self-force in both cases is a theoretical experiment for distinguishing both geometries, which otherwise are locally indistinguishable. This idea was applied before to four and higher-dimensional black holes by the present and other authors. However, the particularities of the BTZ geometry makes the analysis considerable more complicated than those. First, the BTZ spacetimes are not asymptotically flat but instead asymptotically AdS. In addition, the relative distance d (r ,r +1 ) between two particles located at a radius r and r +1 in the geometry tends to zero when r →∞. This behavior, which is radically different in a flat geometry, changes the analysis of the asymptotic conditions for the electrostatic field. The other problem is that there exist several regularization methods other than the one we are employing, and there does not exist a proof in three dimensions that they are equivalent. However, we focus on the Haddamard method and obtain an expression for the hypothetical self-force in series, and the resulting expansion is convergent to the real solution. We suspect that the convergence is not uniform, and furthermore there are no summation formulas at our disposal. It appears, for points that are far away from the black hole the calculation of the Haddamard self-force requires higher-order summation. These subtleties are carefully analyzed in the paper, and it is shown that they lead to severe problems when calculating the Haddamard self-force for asymptotic points in the geometry.

  6. Characterization of the Electrostatic Environment of Launchers

    NASA Astrophysics Data System (ADS)

    Soyah, Jamila; Mantion, Pascal; Herlem, Yannick

    2016-05-01

    The purpose of this study was to update knowledge in characterization of the electrostatic environment of launchers in order to be able to propose reductions of design constraints.The first part of this study showed that flashover discharges are the most energetic discharges likely to occur on a launcher. They are mostly due to accumulations of charges by triboelectricity on the external surface of the launcher while flying through clouds containing a lot of small solid particles.Actually flashover discharges are mitigated by limiting the surface's resistance of dielectric materials such as thermal protection set on the external skin of the launcher, thanks to antistatic paints that avoid significant accumulations of charges.But this specified limitation leads to a lot of non- conformances during production phases and, as a result, this leads to additional costs and delays in launches campaigns. That is why on-ground tests have been defined in order to assess the accessibility of a relaxation of those specifications, which would reduce non-conformances.On-ground tests have been carried out, in the second part, on samples of thermal protections covered with antistatic paints with different degraded values of surface resistance. These tests aimed at checking in which conditions a surface discharge can occur in order to deduce a relationship between characteristics of the samples (surface resistance, half-discharge time) and the occurrence of a surface discharge, at ambient pressure and at low pressure.In the third part, in-flight experiments have been defined in order to confirm some hypotheses considered in the study and to assess some parameters in a more accurate way like the incoming charges density per surface unit or the voltage between stages when they get separated, in order to assess more accurately whether the unwinding equalization wire dedicated to maintain the electrostatic balance between stages is necessary or not.

  7. Magnetic and electrostatic confinement of plasma with tuning of electrostatic field

    DOEpatents

    Rostoker, Norman; Binderbauer, Michl; Qerushi, Artan; Tahsiri, Hooshang

    2006-10-10

    A system and method for containing plasma and forming a Field Reversed Configuration (FRC) magnetic topology are described in which plasma ions are contained magnetically in stable, non-adiabatic orbits in the FRC. Further, the electrons are contained electrostatically in a deep energy well, created by tuning an externally applied magnetic field. The simultaneous electrostatic confinement of electrons and magnetic confinement of ions avoids anomalous transport and facilitates classical containment of both electrons and ions. In this configuration, ions and electrons may have adequate density and temperature so that upon collisions they are fused together by nuclear force, thus releasing fusion energy. Moreover, the fusion fuel plasmas that can be used with the present confinement system and method are not limited to neutronic fuels only, but also advantageously include advanced fuels.

  8. Magnetic and electrostatic confinement of plasma with tuning of electrostatic field

    DOEpatents

    Rostoker, Norman; Binderbauer, Michl; Qerushi, Artan; Tahsiri, Hooshang

    2006-03-21

    A system and method for containing plasma and forming a Field Reversed Configuration (FRC) magnetic topology are described in which plasma ions are contained magnetically in stable, non-adiabatic orbits in the FRC. Further, the electrons are contained electrostatically in a deep energy well, created by tuning an externally applied magnetic field. The simultaneous electrostatic confinement of electrons and magnetic confinement of ions avoids anomalous transport and facilitates classical containment of both electrons and ions. In this configuration, ions and electrons may have adequate density and temperature so that upon collisions they are fused together by nuclear force, thus releasing fusion energy. Moreover, the fusion fuel plasmas that can be used with the present confinement system and method are not limited to neutronic fuels only, but also advantageously include advanced fuels.

  9. Magnetic and electrostatic confinement of plasma with tuning of electrostatic field

    DOEpatents

    Rostoker, Norman; Binderbauer, Michl; Qerushi, Artan; Tahsiri, Hooshang

    2008-10-21

    A system and method for containing plasma and forming a Field Reversed Configuration (FRC) magnetic topology are described in which plasma ions are contained magnetically in stable, non-adiabatic orbits in the FRC. Further, the electrons are contained electrostatically in a deep energy well, created by tuning an externally applied magnetic field. The simultaneous electrostatic confinement of electrons and magnetic confinement of ions avoids anomalous transport and facilitates classical containment of both electrons and ions. In this configuration, ions and electrons may have adequate density and temperature so that upon collisions they are fused together by nuclear force, thus releasing fusion energy. Moreover, the fusion fuel plasmas that can be used with the present confinement system and method are not limited to neutronic fuels only, but also advantageously include advanced fuels.

  10. A Bridge between Two Important Problems in Optics and Electrostatics

    ERIC Educational Resources Information Center

    Capelli, R.; Pozzi, G.

    2008-01-01

    It is shown how the same physically appealing method can be applied to find analytic solutions for two difficult and apparently unrelated problems in optics and electrostatics. They are: (i) the diffraction of a plane wave at a perfectly conducting thin half-plane and (ii) the electrostatic field associated with a parallel array of stripes held at…

  11. Electrostatic phenomena in organic semiconductors: fundamentals and implications for photovoltaics

    NASA Astrophysics Data System (ADS)

    D'Avino, Gabriele; Muccioli, Luca; Castet, Frédéric; Poelking, Carl; Andrienko, Denis; Soos, Zoltán G.; Cornil, Jérôme; Beljonne, David

    2016-11-01

    This review summarizes the current understanding of electrostatic phenomena in ordered and disordered organic semiconductors, outlines numerical schemes developed for quantitative evaluation of electrostatic and induction contributions to ionization potentials and electron affinities of organic molecules in a solid state, and illustrates two applications of these techniques: interpretation of photoelectron spectroscopy of thin films and energetics of heterointerfaces in organic solar cells.

  12. Electrostatically suspended and sensed micro-mechanical rate gyroscope

    NASA Technical Reports Server (NTRS)

    Torti, R.; Gerver, M.; Gondhalekar, V.; Bart, S.; Maxwell, B.

    1994-01-01

    The goal of this work is development of fully electrostatically suspended and rebalancing angular rate sensing micro-gyroscope fabricated according to standard VLSI techniques. Fabrication of test structures is proceeding. Off chip electronics for the electrostatic sensing and driving circuits has been tested. The prototype device will be assembled in a hybrid construction including the FET input stages of the sensors.

  13. Electrostatic waves and the strong diffusion of magnetospheric electrons

    NASA Technical Reports Server (NTRS)

    Kennel, C. F.; Ashour-Abdalla, M.

    1982-01-01

    A comprehensive review of electron pitch angle scattering in the magnetosphere and the plasma waves responsible for it is presented, emphasizing the strong diffusion of diffuse auroral electrons by electrostatic electron cyclotron harmonic waves. The weak diffusion of energetic radiation belt electrons within the plasmasphere is reviewed briefly. Several new suggestions concerning the quasilinear diffusion from and saturation of electrostatic waves are included.

  14. The Global Precipitation Climatology Project (GPCP) Combined Precipitation Dataset

    NASA Technical Reports Server (NTRS)

    Huffman, George J.; Adler, Robert F.; Arkin, Philip; Chang, Alfred; Ferraro, Ralph; Gruber, Arnold; Janowiak, John; McNab, Alan; Rudolf, Bruno; Schneider, Udo

    1997-01-01

    The Global Precipitation Climatology Project (GPCP) has released the GPCP Version 1 Combined Precipitation Data Set, a global, monthly precipitation dataset covering the period July 1987 through December 1995. The primary product in the dataset is a merged analysis incorporating precipitation estimates from low-orbit-satellite microwave data, geosynchronous-orbit -satellite infrared data, and rain gauge observations. The dataset also contains the individual input fields, a combination of the microwave and infrared satellite estimates, and error estimates for each field. The data are provided on 2.5 deg x 2.5 deg latitude-longitude global grids. Preliminary analyses show general agreement with prior studies of global precipitation and extends prior studies of El Nino-Southern Oscillation precipitation patterns. At the regional scale there are systematic differences with standard climatologies.

  15. Electrostatic forces in wind-pollination—Part 1: Measurement of the electrostatic charge on pollen

    NASA Astrophysics Data System (ADS)

    Bowker, George E.; Crenshaw, Hugh C.

    Under fair weather conditions, a weak electric field exists between negative charge induced on the surface of plants and positive charge in the air. This field is magnified around points (e.g. stigmas) and can reach values up to 3×10 6 V m -1. If wind-dispersed pollen grains are electrically charged, the electrostatic force (which is the product of the pollen's charge and the electric field at the pollen's location) could influence pollen capture. In this article, we report measurements of the electrostatic charge carried by wind-dispersed pollen grains. Pollen charge was measured using an adaptation of the Millikan oil-drop experiment for seven anemophilous plants: Acer rubrum, Cedrus atlantica, Cedrus deodara, Juniperus virginiana, Pinus taeda, Plantago lanceolata and Ulmus alata. All species had charged pollen, some were positive others negative. The distributions (number of pollen grains as a function of charge) were bipolar and roughly centered about zero although some distributions were skewed towards positive charges. Most pollen carried small amounts of charge, 0.8 fC in magnitude, on average. A few carried charges up to 40 fC. For Juniperus, pollen charges were also measured in nature and these results concurred with those found in the laboratory. For nearly all charged pollen grains, the likelihood that electrostatics influence pollen capture is evident.

  16. Electrostatic excitation for the force amplification of microcantilever sensors.

    PubMed

    Shokuhfar, Ali; Heydari, Payam; Ebrahimi-Nejad, Salman

    2011-01-01

    This paper describes an electrostatic excited microcantilever sensor operating in static mode that is more sensitive than traditional microcantilevers. The proposed sensor comprises a simple microcantilever with electrostatic excitation ability and an optical or piezoresistive detector. Initially the microcantilever is excited by electrostatic force to near pull-in voltage. The nonlinear behavior of the microcantilever in near pull-in voltage i.e., the inverse-square relation between displacement and electrostatic force provides a novel method for force amplification. In this situation, any external load applied to the sensor will be amplified by electrostatic force leading to more displacement. We prove that the proposed microcantilever sensor can be 2 to 100 orders more sensitive compared with traditional microcantilevers sensors of the same dimensions. The results for surface stress and the free-end point force load are discussed.

  17. Auroral helium precipitation.

    NASA Technical Reports Server (NTRS)

    Axford, W. I.; Chivers, H. J. A.; Eberhardt, P.; Geiss, J.; Buehler, F.

    1972-01-01

    Application of the metal foil sampling technique, which has been used to measure helium, neon, and argon fluxes in the solar wind, to the problem of measuring the fluxes of these gases in the auroral primary radiation. Aluminum and platinum foils have been flown into two bright auroras and have been recovered. The foils have been analyzed for helium and neon isotopes with a mass spectrometer; so far only He4 has been detected. In the first flight the precipitating flux of He4 with particle energies above about 1 keV was approximately 1,000,000 per sq cm per sec, and the backscattered flux was smaller by about a factor of 10. In the second flight the aurora was less bright, and the He4 fluxes were lower by a factor of about 2. A rough analysis suggests that the mean energy of the incident particles was greater than 3 keV.

  18. Electrostatic analyzer measurements of ionospheric thermal ion populations

    NASA Astrophysics Data System (ADS)

    Fernandes, P. A.; Lynch, K. A.

    2016-07-01

    We define the observational parameter regime necessary for observing low-altitude ionospheric origins of high-latitude ion upflow/outflow. We present measurement challenges and identify a new analysis technique which mitigates these impediments. To probe the initiation of auroral ion upflow, it is necessary to examine the thermal ion population at 200-350 km, where typical thermal energies are tenths of eV. Interpretation of the thermal ion distribution function measurement requires removal of payload sheath and ram effects. We use a 3-D Maxwellian model to quantify how observed ionospheric parameters such as density, temperature, and flows affect in situ measurements of the thermal ion distribution function. We define the viable acceptance window of a typical top hat electrostatic analyzer in this regime and show that the instrument's energy resolution prohibits it from directly observing the shape of the particle spectra. To extract detailed information about measured particle population, we define two intermediate parameters from the measured distribution function, then use a Maxwellian model to replicate possible measured parameters for comparison to the data. Liouville's theorem and the thin-sheath approximation allow us to couple the measured and modeled intermediate parameters such that measurements inside the sheath provide information about plasma outside the sheath. We apply this technique to sounding rocket data to show that careful windowing of the data and Maxwellian models allows for extraction of the best choice of geophysical parameters. More widespread use of this analysis technique will help our community expand its observational database of the seed regions of ionospheric outflows.

  19. Electrostatic analyzer measurements of ionospheric thermal ion populations

    DOE PAGES

    Fernandes, P. A.; Lynch, K. A.

    2016-07-09

    Here, we define the observational parameter regime necessary for observing low-altitude ionospheric origins of high-latitude ion upflow/outflow. We present measurement challenges and identify a new analysis technique which mitigates these impediments. To probe the initiation of auroral ion upflow, it is necessary to examine the thermal ion population at 200-350 km, where typical thermal energies are tenths of eV. Interpretation of the thermal ion distribution function measurement requires removal of payload sheath and ram effects. We use a 3-D Maxwellian model to quantify how observed ionospheric parameters such as density, temperature, and flows affect in situ measurements of the thermalmore » ion distribution function. We define the viable acceptance window of a typical top-hat electrostatic analyzer in this regime and show that the instrument's energy resolution prohibits it from directly observing the shape of the particle spectra. To extract detailed information about measured particle population, we define two intermediate parameters from the measured distribution function, then use a Maxwellian model to replicate possible measured parameters for comparison to the data. Liouville's theorem and the thin-sheath approximation allow us to couple the measured and modeled intermediate parameters such that measurements inside the sheath provide information about plasma outside the sheath. We apply this technique to sounding rocket data to show that careful windowing of the data and Maxwellian models allows for extraction of the best choice of geophysical parameters. More widespread use of this analysis technique will help our community expand its observational database of the seed regions of ionospheric outflows.« less

  20. Electrostatic analyzer measurements of ionospheric thermal ion populations

    SciTech Connect

    Fernandes, P. A.; Lynch, K. A.

    2016-07-09

    Here, we define the observational parameter regime necessary for observing low-altitude ionospheric origins of high-latitude ion upflow/outflow. We present measurement challenges and identify a new analysis technique which mitigates these impediments. To probe the initiation of auroral ion upflow, it is necessary to examine the thermal ion population at 200-350 km, where typical thermal energies are tenths of eV. Interpretation of the thermal ion distribution function measurement requires removal of payload sheath and ram effects. We use a 3-D Maxwellian model to quantify how observed ionospheric parameters such as density, temperature, and flows affect in situ measurements of the thermal ion distribution function. We define the viable acceptance window of a typical top-hat electrostatic analyzer in this regime and show that the instrument's energy resolution prohibits it from directly observing the shape of the particle spectra. To extract detailed information about measured particle population, we define two intermediate parameters from the measured distribution function, then use a Maxwellian model to replicate possible measured parameters for comparison to the data. Liouville's theorem and the thin-sheath approximation allow us to couple the measured and modeled intermediate parameters such that measurements inside the sheath provide information about plasma outside the sheath. We apply this technique to sounding rocket data to show that careful windowing of the data and Maxwellian models allows for extraction of the best choice of geophysical parameters. More widespread use of this analysis technique will help our community expand its observational database of the seed regions of ionospheric outflows.

  1. Immunoaffinity centrifugal precipitation chromatography.

    PubMed

    Qi, Lin; Ito, Yoichiro

    2007-06-01

    Purification of proteins based on immunoaffinity has been performed using a solid support coated with antibody against the target proteins. The method requires immobilizing the antibody onto the solid support using protein A or G, and has a risk of adsorptive loss of target proteins onto the solid support. Centrifugal precipitation chromatography has been successfully used to purify enzymes, such as ketosteroid isomerase and hyaluronidase without the use of solid support. The purpose of this study is to demonstrate that immunoaffinity centrifugal precipitation chromatography is capable of isolating an antigen by exploiting antigen-antibody binding. The separation was initiated by filling both channels with 40% saturated ammonium sulfate (AS) of pH 4-4.5 followed by loading 20 microl of human plasma (National Institutes of Health blood bank) mixed with 2 mg of rabbit anti-HSA (human serum protein) antibody (Sigma). Then, the sample channel was eluted with water at 0.03 ml/min and AS channel with 40% AS solution of pH 4-4.5 at 1 ml/min until all non-binding components were eluted. Then, the releasing reagent (50% AS solution containing 0.5 M glycine and 10% ammonium hydroxide at pH 10) was introduced through the AS channel to release the target protein (HSA). The retained antibody was recovered by eluting the sample channel with water at 1 ml/min. A hollow fiber membrane device at the outlet (MicroKros, Spectrum, New Brunswick, NJ, USA) was provided on-line dialysis of the eluent before fractions were collected, so that the fractions could be analyzed by SDS-PAGE (sodium dodecyl sulfate - polyacrylamide gel electrophoresis) without further dialysis. The current method does not require immobilizing the antibody onto a matrix, which is used by the conventional immunoaffinity chromatography. This method ensures full recovery of the antigen and antibody, and it may be applied to purification of other proteins.

  2. Extending the Technology Acceptance Model: Policy Acceptance Model (PAM)

    NASA Astrophysics Data System (ADS)

    Pierce, Tamra

    There has been extensive research on how new ideas and technologies are accepted in society. This has resulted in the creation of many models that are used to discover and assess the contributing factors. The Technology Acceptance Model (TAM) is one that is a widely accepted model. This model examines people's acceptance of new technologies based on variables that directly correlate to how the end user views the product. This paper introduces the Policy Acceptance Model (PAM), an expansion of TAM, which is designed for the analysis and evaluation of acceptance of new policy implementation. PAM includes the traditional constructs of TAM and adds the variables of age, ethnicity, and family. The model is demonstrated using a survey of people's attitude toward the upcoming healthcare reform in the United States (US) from 72 survey respondents. The aim is that the theory behind this model can be used as a framework that will be applicable to studies looking at the introduction of any new or modified policies.

  3. Investigation and prediction of protein precipitation by polyethylene glycol using quantitative structure-activity relationship models.

    PubMed

    Hämmerling, Frank; Ladd Effio, Christopher; Andris, Sebastian; Kittelmann, Jörg; Hubbuch, Jürgen

    2017-01-10

    Precipitation of proteins is considered to be an effective purification method for proteins and has proven its potential to replace costly chromatography processes. Besides salts and polyelectrolytes, polymers, such as polyethylene glycol (PEG), are commonly used for precipitation applications under mild conditions. Process development, however, for protein precipitation steps still is based mainly on heuristic approaches and high-throughput experimentation due to a lack of understanding of the underlying mechanisms. In this work we apply quantitative structure-activity relationships (QSARs) to model two parameters, the discontinuity point m* and the β-value, that describe the complete precipitation curve of a protein under defined conditions. The generated QSAR models are sensitive to the protein type, pH, and ionic strength. It was found that the discontinuity point m* is mainly dependent on protein molecular structure properties and electrostatic surface properties, whereas the β-value is influenced by the variance in electrostatics and hydrophobicity on the protein surface. The models for m* and the β-value exhibit a good correlation between observed and predicted data with a coefficient of determination of R(2)≥0.90 and, hence, are able to accurately predict precipitation curves for proteins. The predictive capabilities were demonstrated for a set of combinations of protein type, pH, and ionic strength not included in the generation of the models and good agreement between predicted and experimental data was achieved.

  4. Precipitation-Based ENSO Indices

    NASA Technical Reports Server (NTRS)

    Adler, Robert; Curtis, Scott

    1998-01-01

    In this study gridded observed precipitation data sets are used to construct rainfall-based ENSO indices. The monthly El Nino and La Nina Indices (EI and LI) measure the steepest zonal gradient of precipitation anomalies between the equatorial Pacific and the Maritime Continent. This is accomplished by spatially averaging precipitation anomalies using a spatial boxcar filter, finding the maximum and minimum averages within a Pacific and Maritime Continent domain for each month, and taking differences. EI and LI can be examined separately or combined to produce one ENSO Precipitation Index (ESPI). ESPI is well correlated with traditional sea surface temperature and pressure indices, leading Nino 3.4. One advantage precipitation indices have over more conventional indices, is describing the strength and position of the Walker circulation. Examples are given of tracking the impact of ENSO events on the tropical precipitation fields.

  5. Purification of antibodies by precipitating impurities using Polyethylene Glycol to enable a two chromatography step process.

    PubMed

    Giese, Glen; Myrold, Adam; Gorrell, Jeffrey; Persson, Josefine

    2013-11-01

    The purification of antibodies by precipitating impurities using Polyethylene Glycol (PEG) was assessed with the objective of developing a two chromatography column purification process. A PEG precipitation method was evaluated for use in the industrial purification of recombinant monoclonal antibodies (MAbs). Effective and robust precipitation conditions including PEG concentration, pH, temperature, time, and protein concentration were identified for several different MAbs. A recovery process using two chromatography steps in combination with PEG precipitation gave acceptable yield and purity levels for IgG1 and IgG4 antibodies with a broad range of isoelectric points (pI). PEG precipitation removed host cell proteins (HCPs), high molecular weight species (HMWS), leached Protein A ligand, and host cell DNA to acceptable levels when run under appropriate conditions, and some endogenous virus removal was achieved.

  6. Market Acceptance of Smart Growth

    EPA Pesticide Factsheets

    This report finds that smart growth developments enjoy market acceptance because of stability in prices over time. Housing resales in smart growth developments often have greater appreciation than their conventional suburban counterparts.

  7. L-286 Acceptance Test Record

    SciTech Connect

    HARMON, B.C.

    2000-01-14

    This document provides a detailed account of how the acceptance testing was conducted for Project L-286, ''200E Area Sanitary Water Plant Effluent Stream Reduction''. The testing of the L-286 instrumentation system was conducted under the direct supervision

  8. Flexible electrostatic nanogenerator using graphene oxide film

    NASA Astrophysics Data System (ADS)

    Tian, He; Ma, Shuo; Zhao, Hai-Ming; Wu, Can; Ge, Jie; Xie, Dan; Yang, Yi; Ren, Tian-Ling

    2013-09-01

    Recently, graphene oxide (GO) super capacitors with ultra-high energy densities have received significant attention. In addition to their use in energy storage, GO capacitors might also have broad applications in renewable energy engineering, such as energy harvesting. Here, a flexible nanogenerator based on GO film is designed. A multilayer structure Al/PI/GO/PI/ITO is made on a flexible PET substrate. The GO nanogenerator could generate a peak voltage of 2 V with a current of 30 nA upon the repetitive application of a 15 N force with a frequency of 1 Hz. Moreover, the output voltage was increased to 34.4 V upon increasing the frequency of force application to 10 Hz. Compared with control samples, embedding GO film with a release structure into the device could significantly enhance the output voltage from 0.1 V to 2.0 V. The mechanism of our nanogenerator can be explained by an electrostatic effect, which is fundamentally different from that of previously reported piezoelectric and triboelectric generators. In this manuscript, we demonstrate flexible nanogenerators with large-area graphene based materials, which may open up new avenues of research with regard to applications in energy harvesting.Recently, graphene oxide (GO) super capacitors with ultra-high energy densities have received significant attention. In addition to their use in energy storage, GO capacitors might also have broad applications in renewable energy engineering, such as energy harvesting. Here, a flexible nanogenerator based on GO film is designed. A multilayer structure Al/PI/GO/PI/ITO is made on a flexible PET substrate. The GO nanogenerator could generate a peak voltage of 2 V with a current of 30 nA upon the repetitive application of a 15 N force with a frequency of 1 Hz. Moreover, the output voltage was increased to 34.4 V upon increasing the frequency of force application to 10 Hz. Compared with control samples, embedding GO film with a release structure into the device could

  9. Electrostatic Dust Control for Planetary Rovers

    NASA Astrophysics Data System (ADS)

    Clark, P. E.; Curtis, S. A.; Farrell, W. M.; Nuth, J. A.; Stubbs, T. J.; Rilee, M. L.

    2005-12-01

    Detailed study of the physical and chemical nature of the fine particulate portion of the regoliths of these bodies is a key to understanding micrometeorite bombardment and the nature of regolith formation. Thus, missions to sample the surfaces of atmosphereless bodies, including the Moon, asteroids, and Mercury, have been identified as crucial components of solar system exploration over the next decades. We have proposed autonomous reconfigurable robotic manual assistants and lander/rovers for such missions. On the other hand, dust poses problems for mechanisms and exposed surfaces on landers/rovers sent to such bodies. Compromise of seals and loss of sample material, as well as mechanical damage to systems and surfaces, occurred after hours of operation during the Apollo missions. Thus both dust mitigation and dust collection are issues which must be addressed for sampling missions. Dust activity on atmosphereless bodies is ubiquitous and induced by complex interactions of fine particulates, environmentally-dependent fields, and charged particles with vehicle surfaces and mechanisms. Dust particles are both abrasive and adhesive as a result of the melting and crushing from micrometeorite bombardment. Thus, dust dynamics result from the interplay between mechanical and electrostatic forces and are a critical environmental factor with which all rover technologies must deal. We have considered various strategies for dust mitigation. Passive ones include the use of conducting surfaces and O-ring sealing of all mechanisms. Several active mechanisms for not only removing but collecting dust are under consideration. Our inter-disciplinary team is investigating the feasibility of an electrostatically based concept for a dust control. Relatively little work has been done on empirically simulating what happens when another surface is introduced into a non-conducting, dusty regolith. We plan to test our concept by performing empirical simulations of the interaction between

  10. Conservation and Role of Electrostatics in Thymidylate Synthase

    NASA Astrophysics Data System (ADS)

    Garg, Divita; Skouloubris, Stephane; Briffotaux, Julien; Myllykallio, Hannu; Wade, Rebecca C.

    2015-11-01

    Conservation of function across families of orthologous enzymes is generally accompanied by conservation of their active site electrostatic potentials. To study the electrostatic conservation in the highly conserved essential enzyme, thymidylate synthase (TS), we conducted a systematic species-based comparison of the electrostatic potential in the vicinity of its active site. Whereas the electrostatics of the active site of TS are generally well conserved, the TSs from minimal organisms do not conform to the overall trend. Since the genomes of minimal organisms have a high thymidine content compared to other organisms, the observation of non-conserved electrostatics was surprising. Analysis of the symbiotic relationship between minimal organisms and their hosts, and the genetic completeness of the thymidine synthesis pathway suggested that TS from the minimal organism Wigglesworthia glossinidia (W.g.b.) must be active. Four residues in the vicinity of the active site of Escherichia coli TS were mutated individually and simultaneously to mimic the electrostatics of W.g.b TS. The measured activities of the E. coli TS mutants imply that conservation of electrostatics in the region of the active site is important for the activity of TS, and suggest that the W.g.b. TS has the minimal activity necessary to support replication of its reduced genome.

  11. Stability, Nonlinearity and Reliability of Electrostatically Actuated MEMS Devices

    PubMed Central

    Zhang, Wen-Ming; Meng, Guang; Chen, Di

    2007-01-01

    Electrostatic micro-electro-mechanical system (MEMS) is a special branch with a wide range of applications in sensing and actuating devices in MEMS. This paper provides a survey and analysis of the electrostatic force of importance in MEMS, its physical model, scaling effect, stability, nonlinearity and reliability in detail. It is necessary to understand the effects of electrostatic forces in MEMS and then many phenomena of practical importance, such as pull-in instability and the effects of effective stiffness, dielectric charging, stress gradient, temperature on the pull-in voltage, nonlinear dynamic effects and reliability due to electrostatic forces occurred in MEMS can be explained scientifically, and consequently the great potential of MEMS technology could be explored effectively and utilized optimally. A simplified parallel-plate capacitor model is proposed to investigate the resonance response, inherent nonlinearity, stiffness softened effect and coupled nonlinear effect of the typical electrostatically actuated MEMS devices. Many failure modes and mechanisms and various methods and techniques, including materials selection, reasonable design and extending the controllable travel range used to analyze and reduce the failures are discussed in the electrostatically actuated MEMS devices. Numerical simulations and discussions indicate that the effects of instability, nonlinear characteristics and reliability subjected to electrostatic forces cannot be ignored and are in need of further investigation.

  12. Electrostatic shape-shifting ion optics

    DOEpatents

    Dahl, David A.; Scott, Jill R.; Appelhans, Anthony D.

    2006-05-02

    Electrostatic shape-shifting ion optics includes an outer electrode that defines an interior region between first and second opposed open ends. A first inner electrode is positioned within the interior region of the outer electrode at about the first open end. A second inner electrode is positioned within the interior region of the outer electrode at about the second open end. A first end cap electrode is positioned at about a first open end of the first inner electrode so that the first end cap electrode substantially encloses the first open end of the first inner electrode. A second end cap electrode is positioned at about a second open end of the second inner electrode so that the second end cap electrode substantially encloses the second open end of the second inner electrode. A voltage source operatively connected to each of the electrodes applies voltage functions to each of the electrodes to produce an electric field within an interior space enclosed by the electrodes.

  13. Electrostatic charge interactions in ordered powder mixes.

    PubMed

    Staniforth, J N; Rees, J E

    1982-02-01

    A method is described for measuring the electrostatic charge generated in powders following contact with a plane substrate. The method uses a Faraday well connected to an electrometer and allows the specific charge of powders to be determined. Of the various drugs and excipients studied, most charged electronegatively following contact with glass surfaces, but became electropositive after contact with polyethylene surfaces. The charge interactions of drug and excipient powders modified the behaviour of ordered mixes formed in similar conditions to those of charge measurement. Powders with like charges formed less stable ordered mixes than those in which drug and excipient particles carried opposite charges. Following triboelectrification in an air cyclone constructed of brass, powders had charges at least 100 times greater than those formed after contact with glass surfaces. Optimization of the triboelectric charging conditions allowed ordered mixes to be prepared in which a maximum electronegative charge was applied to the excipient whilst the drug was given a maximum electropositive charge. Studies of segregation/stability showed that ordered mixes subjected to triboelectrification were less prone to segregation than uncharged powders.

  14. Heliopause Electrostatic Rapid Transit System (HERTS)

    NASA Technical Reports Server (NTRS)

    Wiegmann, Bruce M.

    2015-01-01

    A recent six month investigation focused on: "Determining the benefits of propelling a scientific spacecraft by an 'Electric Sail' propulsion system to the edge of our solar system (the Heliopause), a distance of 100 to 120 AU, in ten years or less" has recently been completed by the Advance Concepts Office at NASA's MSFC. The concept investigated has been named the Heliopause Electrostatic Rapid Transit System (HERTS) by the MSFC team. The HERTS is a revolutionary propellant-less propulsion concept that is ideal for deep space missions to the Outer Planets, Heliopause, and beyond. It is unique in that it uses momentum exchange from naturally occurring solar wind protons to propel a spacecraft within the heliosphere. The propulsion system consists of an array of electrically positively-biased wires that extend outward 20 km from a rotating (one revolution per hour) spacecraft. It was determined that the HERTS system can accelerate a spacecraft to velocities as much as two to three times that possible by any realistic extrapolation of current state-of-the-art propulsion technologies- including solar electric and solar sail propulsion systems. The data produced show that a scientific spacecraft could reach distances of 100AU in less than 10 years. Moreover, it can be reasonably expected that this system could be developed within a decade and provide meaningful Heliophysics Science and Outer Planetary Science returns in the 2025-2035 timeframe.

  15. MSFC Electrostatic Levitator (ESL) Rapid Quench System

    NASA Technical Reports Server (NTRS)

    SanSoucie, Michael P.; Craven, Paul D.; Rogers, Jan R.

    2014-01-01

    The NASA Marshall Space Flight Center (MSFC) Electrostatic Levitator (ESL) Laboratory is a unique facility for investigators studying high-temperature materials. The laboratory boasts two levitators in which samples can be levitated, heated, melted, undercooled, and resolidified, all without the interference of a container or data-gathering instrument. The ESL main chamber has been upgraded with the addition of a rapid quench system. This system allows samples to be dropped into a quench vessel that can be filled with a low melting point material, such as a gallium or indium alloy. Thereby allowing rapid quenching of undercooled liquid metals. Up to 8 quench vessels can be loaded into the quench wheel, which is indexed with LabVIEW control software. This allows up to 8 samples to be rapidly quenched before having to open the chamber. The system has been tested successfully on several zirconium samples. Future work will be done with other materials using different quench mediums. Microstructural analysis will also be done on successfully quench samples.

  16. Flexible electrostatic nanogenerator using graphene oxide film.

    PubMed

    Tian, He; Ma, Shuo; Zhao, Hai-Ming; Wu, Can; Ge, Jie; Xie, Dan; Yang, Yi; Ren, Tian-Ling

    2013-10-07

    Recently, graphene oxide (GO) super capacitors with ultra-high energy densities have received significant attention. In addition to their use in energy storage, GO capacitors might also have broad applications in renewable energy engineering, such as energy harvesting. Here, a flexible nanogenerator based on GO film is designed. A multilayer structure Al/PI/GO/PI/ITO is made on a flexible PET substrate. The GO nanogenerator could generate a peak voltage of 2 V with a current of 30 nA upon the repetitive application of a 15 N force with a frequency of 1 Hz. Moreover, the output voltage was increased to 34.4 V upon increasing the frequency of force application to 10 Hz. Compared with control samples, embedding GO film with a release structure into the device could significantly enhance the output voltage from 0.1 V to 2.0 V. The mechanism of our nanogenerator can be explained by an electrostatic effect, which is fundamentally different from that of previously reported piezoelectric and triboelectric generators. In this manuscript, we demonstrate flexible nanogenerators with large-area graphene based materials, which may open up new avenues of research with regard to applications in energy harvesting.

  17. Electrostatic comb drive for vertical actuation

    SciTech Connect

    Lee, A. P., LLNL

    1997-07-10

    The electrostatic comb finger drive has become an integral design for microsensor and microactuator applications. This paper reports on utilizing the levitation effect of comb fingers to design vertical-to-the-substrate actuation for interferometric applications. For typical polysilicon comb drives with 2 {micro}m gaps between the stationary and moving fingers, as well as between the microstructures and the substrate, the equilibrium position is nominally 1-2 {micro}m above the stationary comb fingers. This distance is ideal for many phase shifting interferometric applications. Theoretical calculations of the vertical actuation characteristics are compared with the experimental results, and a general design guideline is derived from these results. The suspension flexure stiffnesses, gravity forces, squeeze film damping, and comb finger thicknesses are parameters investigated which affect the displacement curve of the vertical microactuator. By designing a parallel plate capacitor between the suspended mass and the substrate, in situ position sensing can be used to control the vertical movement, providing a total feedback-controlled system. Fundamentals of various capacitive position sensing techniques are discussed. Experimental verification is carried out by a Zygo distance measurement interferometer.

  18. Tribocharging Lunar Soil for Electrostatic Beneficiation

    NASA Technical Reports Server (NTRS)

    2008-01-01

    Future human lunar habitation requires using in situ materials for both structural components and oxygen production. Lunar bases must be constructed from thermal-and radiation-shielding materials that will provide significant protection from the harmful cosmic energy which normally bombards the lunar surface. In addition, shipping oxygen from Earth is weight-prohibitive, and therefore investigating the production of breathable oxygen from oxidized mineral components is a major ongoing NASA research initiative. Lunar regolith may meet the needs for both structural protection and oxygen production. Already a number of oxygen production technologies are being tested, and full-scale bricks made of lunar simulant have been sintered. The beneficiation, or separation, of lunar minerals into a refined industrial feedstock could make production processes more efficient, requiring less energy to operate and maintain and producing higher-performance end products. The method of electrostatic beneficiation used in this research charges mineral powders (lunar simulant) by contact with materials of a different composition. The simulant acquires either a positive or negative charge depending upon its composition relative to the charging material.

  19. Electrostatic Breakdown Analysis using EMsolve and BEMSTER

    SciTech Connect

    Fasenfest, B; White, D

    2005-05-27

    Computer simulations modeling electrostatic behavior were used to simulate dielectric breakdown problems. These simulations modeled composite dielectric and conducting structures to see how much voltage difference or charge accumulation could occur before dielectric breakdown occurred in an air region. Two different computer codes were used for the analysis; EMSolve and BEMSTER. EMSolve, an existing LLNL internal finite element code, requires that a complete volume mesh of the problem be constructed. BEMSTER, a boundary-element code, was developed from an extension of the FEMSTER libraries which power EMSolve. The boundary-integral code offers the advantages of solving for accumulated charge and maximum electric field directly, and of only requiring a surface mesh. However, because it does not automatically solve for the voltage and electric field everywhere in space, post-processing and visualization are slightly more difficult than with EMSolve. Both codes were compared to several analytical solutions, and then applied to the structures of interest. Both codes showed good agreement with the analytic solution and with each other.

  20. Electrostatic field between non-concentric cylinders

    SciTech Connect

    Garcia, M

    2000-01-10

    This report describes a closed-form solution to the electrostatic potential, and the electric field, between non-concentric cylinders, with the inner cylinder charged and the outer cylinder grounded. This problem is an abstraction of the situation of an electron beam within a drift tube. Capacitive and surface current probes on the inner wall of the outer cylinder are used to detect the asymmetry of the field when the beam is off center. The solution of this problem allows for a quantitative relationship between probe-array signals and beam deflection. probe-arrays of this type are called ''beam bugs'' at LLNL. The solution described here is suggested by the analysis presented in [3]. The essential point is that the 2D potential for a line source decreases along a radius as the logarithm of the distance. The non-concentric cylinder problem has a unique profile of this type for each ray from ({rho}, {sigma}) linking the inner cylinder at equipotential V{sub 2}, and the outer cylinder at equipotential 0.

  1. Electrostatically-tuned dimensional crossover in nanowires

    NASA Astrophysics Data System (ADS)

    Tomczyk, Michelle; Cheng, Guanglei; Huang, Mengchen; Lee, Hyungwoo; Eom, Chang-Beom; Irvin, Patrick; Levy, Jeremy

    The electron system at the interface of two complex oxides, LaAlO3 and SrTiO3, exhibits a number of interesting strongly-correlated electronic properties, such as superconductivity and spin-orbit coupling. Reduced dimensionality is made accessible through nanowire devices created with conducting AFM lithography. Here, we describe an electrostatically-controlled dimensionality crossover in weak antilocalization behavior of LaAlO3/SrTiO3 nanowires at low temperature. These measurements give insight to the interplay of spin-orbit coupling and dimensionality. Characterizing the behavior of the strongly-correlated electronic properties in these reduced dimensions is necessary in order to develop this system as a multifunctional nanoelectronics platform. We gratefully acknowledge financial support from the following agencies and grants: ARO (W911NF-08-1-0317), AFOSR FA9550-10-1-0524 (JL) and FA9550-12-1-0342 (CBE), and NSF (DMR-1104191, DMR-1124131 (JL), ONR N00014-15-1-2847 (JL) and DMR-1234096 (CBE).

  2. Electrostatic model for hydrogen bonds in alcohols

    SciTech Connect

    Giguere, P.A.; Pigeon-Gosselin, M.

    1988-11-01

    The authors have measured the Raman spectra of liquid methanol at temperatures between 50/sup 0/ and -77/sup 0/C. The weak O-H stretching bands appear, under amplification, more and more asymmetric as the temperature is lowered. They can be decomposed into three Gaussian components centered at about 3220, 3310, and 3400 cm/sup -1/. The former, predominant at low temperature, corresponds to single, linear hydrogen bonds (LHB) between two molecules. The other two are assigned to branched hydrogen bonds, respectively bifurcated (BHB), between three molecules, and trifurcated (THB), between four molecules. They conclude that the molecular structure of liquid alcohols is not chain-like, as presumed so far, but a three-dimensional network featuring a mixture of single (LBH), and multiple hydrogen bonds (BHB, and THB). They are mainly electrostatic in nature, their relative proportions and geometry governed by the packing conditions for minimum energy. They form distinct trimers and tetramers in dilute solutions of alcohols in inert solvents and frozen matrices, and the latter even in the vapor.

  3. Integrating electrostatic adhesion to composite structures

    NASA Astrophysics Data System (ADS)

    Heath, Callum J. C.; Bond, Ian P.; Potter, Kevin D.

    2015-04-01

    Additional functionality within load bearing components holds potential for adding value to a structure, design or product. We consider the adaptation of an established technology, electrostatic adhesion or electroadhesion, for application in glass fibre reinforced polymer (GFRP) composite materials. Electroadhesion uses high potential difference (~2-3 kV) between co-planar electrodes to generate temporary holding forces to both electrically conductive and nonconductive contact surfaces. Using a combination of established fabrication techniques, electroadhesive elements are co-cured within a composite host structure during manufacture. This provides an almost symbiotic relationship between the electroadhesive and the composite structure, with the electroadhesive providing an additional functionality, whilst the epoxy matrix material of the composite acts as a dielectric for the high voltage electrodes of the device. Silicone rubber coated devices have been shown to offer high shear load (85kPa) capability for GFRP components held together using this technique. Through careful control of the connection interface, we consider the incorporation of these devices within complete composite structures for additional functionality. The ability to vary the internal connectivity of structural elements could allow for incremental changes in connectivity between discrete sub-structures, potentially introducing variable stiffness to the global structure.

  4. Electrostatic ion cyclotron velocity shear instability

    SciTech Connect

    Lemons, D.S.; Winske, D.; Gary, S.P. )

    1992-12-01

    An electrostatic ion cyclotron instability driven by sheared velocity flow perpendicular to a uniform magnetic field is investigated in the local approximation. The dispersion equation, which includes all kinetic effects and involves only one important parameter, is cast in the form of Gordeyev integrals and solved numerically. The instability occurs roughly at multiples of the ion cyclotron frequency (but modified by the shear) with the growth rate of the individual harmonics overlapping in wavenumber. At small values of the shear parameter, the instability exists in two branches, one at long wavelength, [kappa][rho][sub i] [approximately] 0.5, and one at short wavelength, [kappa][rho][sub i] > 1.5 ([kappa][rho][sub i] is the wavenumber normalized to the ion gyroradius). At larger values of the shear parameter only the longer wavelength branch persists. The growth rate of the long wavelength mode, maximized over wavenumber and frequency, increases monotonically with the shear parameter. Properties of the instability are compared to those of Ganguli et al. obtained in the nonlocal limit.

  5. Investigation of Varied Strontium-Transuranic Precipitation Chemistries for Crossflow

    SciTech Connect

    Nash, C.A.

    2000-07-27

    Precipitation chemistries for strontium and transuranic (TRU) removal have been tested for crossflow filterability and lanthanide removal with simulants of Hanford tank 241-AN-107 supernate. This is the initial work indicating the usefulness of a strontium and permanganate precipitation process as applied to the Hanford River Protection Project. Precipitations with both ferric and ferrous iron were shown to be at least two orders of magnitude less filterable than a 0.1 gpm/ft target average flux that was desired at the time. A precipitate from a strontium nitrate strike alone was found to filter easily and to make the desired average flux. Other chemistries tested included precipitant of lanthanum(III), nickel (II), calcium (II), and a redox chemistry using sodium permanganate. Of these chemistries a strontium and permanganate strike including calcium provided the highest filter flux compared to the other chemistries. It showed the most promise in lanthanide removal as well. This work provides a promising direction for further work to achieve both acceptable filterability and decontamination for Envelope C wastes to be treated by the Hanford River Protection Project. The work reported here was originally intended to satisfy needs for crossflow filter testing of a strontium and ferric precipitation method for treating Envelope C using a 241-AN-107 simulant.

  6. ELECTROSTATIC MODE ASSOCIATED WITH PINCH VELOCITY IN RFPS

    SciTech Connect

    DELZANNO, GIAN LUCA; FINN, JOHN M.; CHACON, LUIS

    2007-02-08

    The existence of a new electrostatic instability is shown for RFP (reversed field pinch) equilibria. This mode arises due to the non-zero equilibrium radial flow (pinch flow). In RFP simulations with no-stress boundary conditions on the tangential velocity at the radial wall, this electrostatic mode is unstable and dominates the nonlinear dynamics, even in the presence of the MHD modes typically responsible for the reversal of the axial magnetic field at edge. Nonlinearly, this mode leads to two beams moving azimuthally towards each other, which eventually collide. The electrostatic mode can be controlled by using Dirichlet (no-slip) boundary conditions on the azimuthal velocity at the radial wall.

  7. An interpretation of electrostatic density shocks in space plasma

    SciTech Connect

    Shi Jiankui; Zhang Tielong; Torkar, Klaus; Liu Zhenxing

    2005-08-15

    A physical model of electrostatic shocks observed in space plasma is established by deriving the 'Sagdeev potential' from the magnetohydrodynamic equations in a cylindrical coordinate system. The results show that the electrostatic density shock and its corresponding solitary electric-field structure can develop from an ion acoustic wave or an ion cyclotron wave if the Mach number and the initial electric field satisfy some conditions. Some features of the shock wave are discussed. The result can be used to interpret the electrostatic shock observed in geospace plasma.

  8. Orientation and transformation of flagella in electrostatic field

    SciTech Connect

    Washizu, M. ); Shikida, M. . Central Research Lab.); Aizawa, S.; Hotani, H. )

    1992-10-01

    As an extension of electrostatic molecular manipulation being developed b the authors using a high-frequency high-intensity field produce din microfabricated electrode systems, electrically induced transformation of bacterial flagella are studied. Flagella are known to assume a variety of distinct helical forms, and transformations among these polymorphic states are induced by environmental changes or by mechanical force. In this paper, the orientation time constant of flagella is first measured under the electrostatic field produced in microfabricated electrodes in order to estimate the magnitude of the induced dipole moment. Then, by further raising the field intensity, observations on the electrostatically induced transformation is made.

  9. A Feasability Study of the Wheel Electrostatic Spectrometer

    NASA Technical Reports Server (NTRS)

    Johansen, Michael Ryan; Phillips, James Ralph; Kelley, Joshua David; Mackey, Paul J.; Holbert, Eirik; Clements, Gregory R.; Calle, Carlos I.

    2014-01-01

    Mars rover missions rely on time-consuming, power-exhausting processes to analyze the Martian regolith. A low power electrostatic sensor in the wheels of a future Mars rover could be used to quickly determine when the rover is driving over a different type of regolith. The Electrostatics and Surface Physics Laboratory at NASA's Kennedy Space Center developed the Wheel Electrostatic Spectrometer as a feasibility study to investigate this option. In this paper, we discuss recent advances in this technology to increase the repeatability of the tribocharging experiments, along with supporting data. In addition, we discuss the development of a static elimination tool optimized for Martian conditions.

  10. Vibration suppression in MEMS devices using electrostatic forces

    NASA Astrophysics Data System (ADS)

    Haddad Khodaparast, Hamed; Madinei, Hadi; Friswell, Michael I.; Adhikari, Sondipon

    2016-04-01

    This paper investigates the use of electrostatic forces for vibration control of MEMS devices. A micro beam subject to electrostatic loading is considered. The electrostatic forces cause softening nonlinearity and their amplitudes are proportional to the square of applied DC voltages. An optimization problem is set up to minimize the vibration level of the micro-beam at given excitation frequencies. A new method based on incrementing nonlinear control parameters of the system and Harmonic Balance is used to obtain the required DC voltages that suppress unwanted vibration of the micro-beam. The results are illustrated using numerical simulations

  11. Multipolar electrostatics for proteins: atom-atom electrostatic energies in crambin.

    PubMed

    Yuan, Yongna; Mills, Matthew J L; Popelier, Paul L A

    2014-02-15

    Accurate electrostatics necessitates the use of multipole moments centered on nuclei or extra point charges centered away from the nuclei. Here, we follow the former alternative and investigate the convergence behavior of atom-atom electrostatic interactions in the pilot protein crambin. Amino acids are cut out from a Protein Data Bank structure of crambin, as single amino acids, di, or tripeptides, and are then capped with a peptide bond at each side. The atoms in the amino acids are defined through Quantum Chemical Topology (QCT) as finite volume electron density fragments. Atom-atom electrostatic energies are computed by means of a multipole expansion with regular spherical harmonics, up to a total interaction rank of L = ℓA+ ℓB + 1 = 10. The minimum internuclear distance in the convergent region of all the 15 possible types of atom-atom interactions in crambin that were calculated based on single amino acids are close to the values calculated from di and tripeptides. Values obtained at B3LYP/aug-cc-pVTZ and MP2/aug-cc-pVTZ levels are only slightly larger than those calculated at HF/6-31G(d,p) level. This convergence behavior is transferable to the well-known amyloid beta polypeptide Aβ1-42. Moreover, for a selected central atom, the influence of its neighbors on its multipole moments is investigated, and how far away this influence can be ignored is also determined. Finally, the convergence behavior of AMBER becomes closer to that of QCT with increasing internuclear distance.

  12. Precipitation in the Solar System

    ERIC Educational Resources Information Center

    McIntosh, Gordon

    2007-01-01

    As an astronomy instructor, I am always looking for commonly observed Earthly experiences to help my students and me understand and appreciate similar occurrences elsewhere in the solar system. Recently I wrote a short TPT article on frost. This paper is on the related phenomena of precipitation. Precipitation, so common on most of the Earth's…

  13. Precipitation Process and Apparatus Therefor

    DOEpatents

    Stang, Jr, L C

    1950-12-05

    This invention concerns an apparatus for remotely-controlled precipitation and filtration operations. Liquid within a precipitation chamber is maintained above a porous member by introducing air beneath the member; pressure beneath the porous member is reduced to suck the liquid through the member and effect filtration.

  14. Diffusion coefficients from resonant interactions with electrostatic electron cyclotron harmonic waves

    SciTech Connect

    Tripathi, A. K.; Singhal, R. P.

    2009-11-15

    Pitch-angle diffusion coefficients have been calculated for resonant interaction with electrostatic electron cyclotron harmonic (ECH) waves using quasilinear diffusion theory. Unlike previous calculations, the parallel group velocity has been included in this study. Further, ECH wave intensity is expressed as a function of wave frequency and wave normal angle with respect to ambient magnetic field. It is found that observed wave electric field amplitudes in Earth's magnetosphere are sufficient to set electrons on strong diffusion in the energy ranges of a few hundred eV. However, the required amplitudes are larger than the observed values for keV electrons and higher by about a factor of 3 compared to past calculations. Required electric field amplitudes are smaller at larger radial distances. It is concluded that ECH waves are responsible for diffuse auroral precipitation of electrons with energies less than about 500 eV.

  15. Encoding information into precipitation structures

    NASA Astrophysics Data System (ADS)

    Martens, Kirsten; Bena, Ioana; Droz, Michel; Rácz, Zoltan

    2008-12-01

    Material design at submicron scales would be profoundly affected if the formation of precipitation patterns could be easily controlled. It would allow the direct building of bulk structures, in contrast to traditional techniques which consist of removing material in order to create patterns. Here, we discuss an extension of our recent proposal of using electrical currents to control precipitation bands which emerge in the wake of reaction fronts in A+ + B- → C reaction-diffusion processes. Our main result, based on simulating the reaction-diffusion-precipitation equations, is that the dynamics of the charged agents can be guided by an appropriately designed time-dependent electric current so that, in addition to the control of the band spacing, the width of the precipitation bands can also be tuned. This makes straightforward the encoding of information into precipitation patterns and, as an amusing example, we demonstrate the feasibility by showing how to encode a musical rhythm.

  16. Diffuse Auroral Precipitation Caused by Wave-Particle Scattering (Invited)

    NASA Astrophysics Data System (ADS)

    Thorne, R. M.; Ni, B.; Bortnik, J.; Li, W.; Nishimura, Y.

    2013-12-01

    Diffuse auroral electron precipitation provides over 70% of ionizing energy input into the nightside upper atmosphere and is a major contribution to the global distribution of high latitude ionospheric conductivity. It is therefore important to understand the origin of the electron precipitation, since this controls the electro-dynamic coupling between the ionosphere and the magnetosphere. Intense electromagnetic whistler-mode chorus emissions and electrostatic cyclotron harmonic (ECH) waves are excited following the injection of plasma sheet electrons (100 eV - 30 keV) into the inner magnetosphere. Resonant scattering by either plasma wave can potentially cause electron precipitation into the atmosphere and subsequent diffuse auroral excitation. However, quantitative analyses of the rate of electron scattering have shown that a combination of both upper band (f > fce/2) and lower band (f < fce/2) chorus provides the dominant mechanism for nightside diffuse auroral precipitation on magnetic field lines mapping to L < 8 where the diffuse aurora is most intense, and that lower band chorus acts as the major contributor to the occurrence of the diffuse aurora on the dayside. It has also been demonstrated that pulsating aurora is cause by the modulation of lower band chorus in the wave source region deep in the magnetosphere. Since chorus emissions are now considered to be important for causing both the loss and local acceleration of high-energy (> 500 keV) radiation belt electrons, the global distribution of diffuse auroral precipitation measured either on the ground or by low altitude satellites can be used to infer the global intensity of chorus waves for subsequent radiation belt modeling.

  17. Biofilm formation and local electrostatic force characteristics of Escherichia coli O157:H7 observed by electrostatic force microscopy

    NASA Astrophysics Data System (ADS)

    Oh, Y. J.; Jo, W.; Yang, Y.; Park, S.

    2007-04-01

    The authors report growth media dependence of electrostatic force characteristics in Escherichia coli O157:H7 biofilm through local measurement by electrostatic force microscopy (EFM). The difference values of electrostatic interaction between the bacterial surface and the abiotic surface show an exponential decay behavior during biofilm development. In the EFM data, the biofilm in the low nutrient media shows a faster decay than the biofilm in the rich media. The surface potential in the bacterial cells was changed from 957to149mV. Local characterization of extracellular materials extracted from the bacteria reveals the progress of the biofilm formation and functional complexities.

  18. Instability of Dielectrics and Conductors in Electrostatic Fields

    NASA Astrophysics Data System (ADS)

    Allaire, Grégoire; Rauch, Jeffrey

    2017-04-01

    This article proves most of the assertion in §116 of Maxwell's treatise on electromagnetism. The results go under the name Earnshaw's Theorem and assert the absence of stable equilibrium configurations of conductors and dielectrics in an external electrostatic field.

  19. PHYSICS UPDATE: Does electrostatic shielding work both ways?

    NASA Astrophysics Data System (ADS)

    Sharma, Natthi L.; Reid, David D.

    1998-09-01

    We demonstrate that there is a sense in which electrostatic shielding works both ways and that Richard Feynman's discussion to this effect in The Feynman Lectures on Physics, though ambiguous, is not incorrect.

  20. Electrostatic capacitance and Faraday cage behavior of carbon nanotube forests

    SciTech Connect

    Ya'akobovitz, A.; Bedewy, M.; Hart, A. J.

    2015-02-02

    Understanding of the electrostatic properties of carbon nanotube (CNT) forests is essential to enable their integration in microelectronic and micromechanical devices. In this study, we sought to understand how the hierarchical geometry and morphology of CNT forests determines their capacitance. First, we find that at small gaps, solid micropillars have greater capacitance, yet at larger gaps the capacitance of the CNT forests is greater. The surface area of the CNT forest accessible to the electrostatic field was extracted by analysis of the measured capacitance, and, by relating the capacitance to the average density of CNTs in the forest, we find that the penetration depth of the electrostatic field is on the order of several microns. Therefore, CNT forests can behave as a miniature Faraday cage. The unique electrostatic properties of CNT forests could therefore enable their use as long-range proximity sensors and as shielding elements for miniature electronic devices.

  1. Microfluidic pressure amplifier circuits and electrostatic gates for pneumatic microsystems

    SciTech Connect

    Tice, Joshua D.; Bassett, Thomas A.; Desai, Amit V.; Apblett, Christopher A.; Kenis, Paul J. A.

    2016-09-20

    An electrostatic actuator is provide that can include a fluidic line, a first electrode, and a second electrode such that a gate chamber portion of the fluidic line is sandwiched between the first electrode and the second electrode. The electrostatic actuator can also include a pressure-balancing channel in fluid communication with the gate chamber portion where the first electrode is sandwiched between the pressure-balancing channel and the gate chamber portion. A pneumatic valve system is provided which includes an electrostatic gate and a fluidic channel fluidly separate from a fluidic control line. A pneumatic valve portion of the fluidic control line can be positioned relative to a portion of the fluidic channel such that expansion of the pneumatic valve portion restricts fluid flow through the fluidic channel. Methods of using an electrostatic actuator and a pneumatic valve system are also provided.

  2. Effect of particle distribution on electrostatic tomography system

    NASA Astrophysics Data System (ADS)

    Gao, Heming; Xu, Chuanlong; Fu, Feifei; Wang, Shimin

    2012-03-01

    Particle is charged due to frictional contact and collisions between particles and pipe wall. Electrostatic tomography technology (EST) is used to monitor the traveling particle charge. However the electric field distribution in the electrostatic sensor arrays is simultaneously affected by both the particle permittivity distribution and particle charge. In the paper, the effect of the different particle flow regimes on EST is investigated numerically and experimentally. Results indicated the particle distribution affected the induced charge on the electrostatic sensor array. But the effect relates to the relationship between the charge distribution and the particle distribution. Furthermore, a fusion of dual modality tomography system consisting of a capacitance sensor and electrostatic sensor arrays is used to investigate the relationship between the particle distribution and charge distribution in a gravity conveying rig. Results showed that the higher particle concentration has higher charge distribution in the gravity conveying rig. Additionally, the measurement of the mass flow rate by EST was investigated.

  3. Electrostatic aggregation of finely-comminuted geological materials

    NASA Technical Reports Server (NTRS)

    Marshall, J. R.; Greeley, R.

    1986-01-01

    Electrostatic forces are known to have a significant effect on the behavior of finely comminuted particulate material: perhaps the most prevalent expression of this being electrostatic aggregation of particles into relatively coherent clumps. However, the precise role of electrostatic attraction and repulsion in determining the behavior of geological materials (such as volcanic ash and aeolian dust) is poorly understood. Electrostatic aggregation of fine particles is difficult to study on Earth either in the geological or laboratory environment principally because the material in an aggregated state remains airborne for such a short period of time. Experiments conducted in the NASA/JCS - KC135 aircraft are discussed. The aircraft experiments are seen as precursors to more elaborate and scientifically more comprehensive Shuttle or Space Station activities.

  4. Electrostatic aggregation of finely-comminuted geological materials

    NASA Technical Reports Server (NTRS)

    Marshall, John R.; Greeley, Ronald

    1987-01-01

    Electrostatic forces are known to have a significant effect on the behavior of finely comminuted particulate material: perhaps the most prevalent expression of this being electrostatic aggregation of particles into relatively coherent clumps. However, the precise role of electrostatic attraction and repulsion in determining the behavior of geological materials (such as volcanic ash and aeolian dust) is poorly understood. Electrostatic aggregation of fine particles is difficult to study on earth either in the geological or laboratory environment principally because the material in an aggregated state remains airborne for such a short period of time. Experiments conducted in the NASA/JSC - KC135 aircraft are discussed. The aircraft experiments are seen as precursors to more elaborate and scientifically more comprehensive Shuttle or Space Station activities.

  5. Anionic lipids and the maintenance of membrane electrostatics in eukaryotes

    PubMed Central

    Platre, Matthieu Pierre

    2017-01-01

    ABSTRACT A wide range of signaling processes occurs at the cell surface through the reversible association of proteins from the cytosol to the plasma membrane. Some low abundant lipids are enriched at the membrane of specific compartments and thereby contribute to the identity of cell organelles by acting as biochemical landmarks. Lipids also influence membrane biophysical properties, which emerge as an important feature in specifying cellular territories. Such parameters are crucial for signal transduction and include lipid packing, membrane curvature and electrostatics. In particular, membrane electrostatics specifies the identity of the plasma membrane inner leaflet. Membrane surface charges are carried by anionic phospholipids, however the exact nature of the lipid(s) that powers the plasma membrane electrostatic field varies among eukaryotes and has been hotly debated during the last decade. Herein, we discuss the role of anionic lipids in setting up plasma membrane electrostatics and we compare similarities and differences that were found in different eukaryotic cells. PMID:28102755

  6. The source of Saturn electrostatic discharges: Atmospheric storms

    NASA Technical Reports Server (NTRS)

    Kaiser, M. L.; Connerney, J. E. P.; Desch, M. D.

    1983-01-01

    Important properties of the recently discovered Saturn electrostatic discharges are entirely consistent with an extended lightning storm system in Saturn's atmosphere. The presently favored B-ring location is ruled out.

  7. The Calculation of the Electrostatic Potential of Infinite Charge Distributions

    ERIC Educational Resources Information Center

    Redzic, Dragan V.

    2012-01-01

    We discuss some interesting aspects in the calculation of the electrostatic potential of charge distributions extending to infinity. The presentation is suitable for the advanced undergraduate level. (Contains 3 footnotes.)

  8. Electrostatic capacitance and Faraday cage behavior of carbon nanotube forests

    NASA Astrophysics Data System (ADS)

    Ya'akobovitz, A.; Bedewy, M.; Hart, A. J.

    2015-02-01

    Understanding of the electrostatic properties of carbon nanotube (CNT) forests is essential to enable their integration in microelectronic and micromechanical devices. In this study, we sought to understand how the hierarchical geometry and morphology of CNT forests determines their capacitance. First, we find that at small gaps, solid micropillars have greater capacitance, yet at larger gaps the capacitance of the CNT forests is greater. The surface area of the CNT forest accessible to the electrostatic field was extracted by analysis of the measured capacitance, and, by relating the capacitance to the average density of CNTs in the forest, we find that the penetration depth of the electrostatic field is on the order of several microns. Therefore, CNT forests can behave as a miniature Faraday cage. The unique electrostatic properties of CNT forests could therefore enable their use as long-range proximity sensors and as shielding elements for miniature electronic devices.

  9. From requirements to acceptance tests

    NASA Technical Reports Server (NTRS)

    Baize, Lionel; Pasquier, Helene

    1993-01-01

    From user requirements definition to accepted software system, the software project management wants to be sure that the system will meet the requirements. For the development of a telecommunication satellites Control Centre, C.N.E.S. has used new rules to make the use of tracing matrix easier. From Requirements to Acceptance Tests, each item of a document must have an identifier. A unique matrix traces the system and allows the tracking of the consequences of a change in the requirements. A tool has been developed, to import documents into a relational data base. Each record of the data base corresponds to an item of a document, the access key is the item identifier. Tracing matrix is also processed, providing automatically links between the different documents. It enables the reading on the same screen of traced items. For example one can read simultaneously the User Requirements items, the corresponding Software Requirements items and the Acceptance Tests.

  10. Defining acceptable conditions in wilderness

    NASA Astrophysics Data System (ADS)

    Roggenbuck, J. W.; Williams, D. R.; Watson, A. E.

    1993-03-01

    The limits of acceptable change (LAC) planning framework recognizes that forest managers must decide what indicators of wilderness conditions best represent resource naturalness and high-quality visitor experiences and how much change from the pristine is acceptable for each indicator. Visitor opinions on the aspects of the wilderness that have great impact on their experience can provide valuable input to selection of indicators. Cohutta, Georgia; Caney Creek, Arkansas; Upland Island, Texas; and Rattlesnake, Montana, wilderness visitors have high shared agreement that littering and damage to trees in campsites, noise, and seeing wildlife are very important influences on wilderness experiences. Camping within sight or sound of other people influences experience quality more than do encounters on the trails. Visitors’ standards of acceptable conditions within wilderness vary considerably, suggesting a potential need to manage different zones within wilderness for different clientele groups and experiences. Standards across wildernesses, however, are remarkably similar.

  11. Fabrication of miniaturized electrostatic deflectors using LIGA

    SciTech Connect

    Jackson, K.H.; Khan-Malek, C.; Muray, L.P.

    1997-04-01

    Miniaturized electron beam columns ({open_quotes}microcolumns{close_quotes}) have been demonstrated to be suitable candidates for scanning electron microscopy (SEM), e-beam lithography and other high resolution, low voltage applications. In the present technology, microcolumns consist of {open_quotes}selectively scaled{close_quotes} micro-sized lenses and apertures, fabricated from silicon membranes with e-beam lithography, reactive ion beam etching and other semiconductor thin-film techniques. These miniaturized electron-optical elements provide significant advantages over conventional optics in performance and ease of fabrication. Since lens aberrations scale roughly with size, it is possible to fabricate simple microcolumns with extremely high brightness sources and electrostatic objective lenses, with resolution and beam current comparable to conventional e-beam columns. Moreover since microcolumns typically operate at low voltages (1 KeV), the proximity effects encountered in e-beam lithography become negligible. For high throughput applications, batch fabrication methods may be used to build large parallel arrays of microcolumns. To date, the best reported performance with a 1 keV cold field emission cathode, is 30 nm resolution at a working distance of 2mm in a 3.5mm column. Fabrication of the microcolumn deflector and stigmator, however, have remained beyond the capabilities of conventional machining operations and semiconductor processing technology. This work examines the LIGA process as a superior alternative to fabrication of the deflectors, especially in terms of degree of miniaturization, dimensional control, placement accuracy, run-out, facet smoothness and choice of suitable materials. LIGA is a combination of deep X-ray lithography, electroplating, and injection molding processes which allow the fabrication of microstructures.

  12. Electrostatic Dust Detection and Removal for ITER

    SciTech Connect

    C.H. Skinner; A. Campos; H. Kugel; J. Leisure; A.L. Roquemore; S. Wagner

    2008-09-01

    We present some recent results on two innovative applications of microelectronics technology to dust inventory measurement and dust removal in ITER. A novel device to detect the settling of dust particles on a remote surface has been developed in the laboratory. A circuit board with a grid of two interlocking conductive traces with 25 μm spacing is biased to 30 – 50 V. Carbon particles landing on the energized grid create a transient short circuit. The current flowing through the short circuit creates a voltage pulse that is recorded by standard nuclear counting electronics and the total number of counts is related to the mass of dust impinging on the grid. The particles typically vaporize in a few seconds restoring the previous voltage standoff. Experience on NSTX however, showed that in a tokamak environment it was still possible for large particles or fibers to remain on the grid causing a long term short circuit. We report on the development of a gas puff system that uses helium to clear such particles. Experiments with varying nozzle designs, backing pressures, puff durations, and exit flow orientations have given an optimal configuration that effectively removes particles from an area up to 25 cm² with a single nozzle. In a separate experiment we are developing an advanced circuit grid of three interlocking traces that can generate a miniature electrostatic traveling wave for transporting dust to a suitable exit port. We have fabricated such a 3-pole circuit board with 25 micron insulated traces that operates with voltages up to 200 V. Recent results showed motion of dust particles with the application of only 50 V bias voltage. Such a device could potentially remove dust continuously without dedicated interventions and without loss of machine availability for plasma operations.

  13. Linear and Nonlinear Electrostatic Waves in Unmagnetized Dusty Plasmas

    SciTech Connect

    Mamun, A. A.; Shukla, P. K.

    2010-12-14

    A rigorous and systematic theoretical study has been made of linear and nonlinear electrostatic waves propagating in unmagnetized dusty plasmas. The basic features of linear and nonlinear electrostatic waves (particularly, dust-ion-acoustic and dust-acoustic waves) for different space and laboratory dusty plasma conditions are described. The experimental observations of such linear and nonlinear features of dust-ion-acoustic and dust-acoustic waves are briefly discussed.

  14. APPARATUS FOR CLEANING GASES WITH ELECTROSTATICALLY CHARGED PARTICLES

    DOEpatents

    Johnstone, H.F.

    1960-02-01

    An apparatus is described for cleaning gases with the help of electrostatically charged pellets. The pellets are blown past baffles in a conduit and into the center of a rotuting body of the gas to be cleaned. The pellets are charged electrostatically by impinging on the baffles. The pellets collect the particles suspended in the gas in their passage from the center of the rotating body to its edge.

  15. Test plan for engineering scale electrostatic enclosure demonstration

    SciTech Connect

    Meyer, L.C.

    1993-02-01

    This test plan describes experimental details of an engineering-scale electrostatic enclosure demonstration to be performed at the Idaho National Engineering Laboratory in fiscal year (FY)-93. This demonstration will investigate, in the engineering scale, the feasibility of using electrostatic enclosures and devices to control the spread of contaminants during transuranic waste handling operations. Test objectives, detailed experimental procedures, and data quality objectives necessary to perform the FY-93 experiments are included in this plan.

  16. Research on Electrostatic Propulsion Using C60 Molecules.

    DTIC Science & Technology

    2007-11-02

    fullerene extract containing C60 and C70 in a ratio of approximately 85% to 15%. The fullerene mix was Soxhlet extracted with toluene from soot. Pure C60...The objective of this program has been to determine properties of fullerenes relevant for electrostatic propulsion, to demonstrate ion extraction ...electrostatic propulsion, to demonstrate ion extraction from a discharge, and to assess the implications for fullerene ion thrusters. The experiments we

  17. Electrostatic quadrupole array for focusing parallel beams of charged particles

    DOEpatents

    Brodowski, John

    1982-11-23

    An array of electrostatic quadrupoles, capable of providing strong electrostatic focusing simultaneously on multiple beams, is easily fabricated from a single array element comprising a support rod and multiple electrodes spaced at intervals along the rod. The rods are secured to four terminals which are isolated by only four insulators. This structure requires bias voltage to be supplied to only two terminals and eliminates the need for individual electrode bias and insulators, as well as increases life by eliminating beam plating of insulators.

  18. Estimation of continental precipitation recycling

    NASA Technical Reports Server (NTRS)

    Brubaker, Kaye L.; Entekhabi, Dara; Eagleson, P. S.

    1993-01-01

    The total amount of water that precipitates on large continental regions is supplied by two mechanisms: 1) advection from the surrounding areas external to the region and 2) evaporation and transpiration from the land surface within the region. The latter supply mechanism is tantamount to the recycling of precipitation over the continental area. The degree to which regional precipitation is supplied by recycled moisture is a potentially significant climate feedback mechanism and land surface-atmosphere interaction, which may contribute to the persistence and intensification of droughts. Gridded data on observed wind and humidity in the global atmosphere are used to determine the convergence of atmospheric water vapor over continental regions. A simplified model of the atmospheric moisture over continents and simultaneous estimates of regional precipitation are employed to estimate, for several large continental regions, the fraction of precipitation that is locally derived. The results indicate that the contribution of regional evaporation to regional precipitation varies substantially with location and season. For the regions studied, the ratio of locally contributed to total monthly precipitation generally lies between 0. 10 and 0.30 but is as high as 0.40 in several cases.

  19. Electrostatic Transport and Manipulation of Lunar Soil and Dust

    SciTech Connect

    Kawamoto, Hiroyuki

    2008-01-21

    Transport and manipulation technologies of lunar soil and dust are under development utilizing the electrostatic force. Transport of particles is realized by an electrostatic conveyer consisting of parallel electrodes. Four-phase traveling electrostatic wave was applied to the electrodes to transport particles upon the conveyer and it was demonstrated that particles were efficiently transported under conditions of low frequency, high voltage, and the application of rectangular wave. Not only linear but also curved and closed transport was demonstrated. Numerical investigation was carried out with a three-dimensional hard-sphere model of the Distinct Element Method to clarify the mechanism of the transport and to predict performances in the lunar environment. This technology is expected to be utilized not only for the transport of bulk soil but also for the cleaning of a solar panel and an optical lens. Another technology is an electrostatic manipulation system to manipulate single particle. A manipulator consisted of two parallel pin electrodes. When voltage was applied between the electrodes, electrophoresis force generated in non-uniform electrostatic field was applied to the particle near the tip of the electrode. The particle was captured by the application of the voltage and released from the manipulator by turning off the voltage. It was possible to manipulate not only insulative but also conductive particles. Three-dimensional electrostatic field calculation was conducted to calculate the electrophoresis force and the Coulomb force.

  20. Electrostatic levitation studies of supercooled liquids and metastable solid phases

    NASA Astrophysics Data System (ADS)

    Rustan, Gustav Errol

    A new laboratory has been developed at Iowa State University (ISU) to be used for the study of high temperature liquids and solids, with particular focus on the supercooling of liquids and their metastable solidification products. This new laboratory employs the electrostatic levitation (ESL) technique, in which a charged sample is suspended between a set of electrodes to achieve non-contact handling. Owing to the elimination of a crucible, high temperature processing of samples can be achieved with reduced levels of contamination and heterogeneous nucleation. Because of the reduction in heterogeneous nucleation, samples can be supercooled well below their equilibrium melting temperature, opening the door to a wide range of measurements on supercooled liquids. Measurements methods have been implemented for the characterization of thermophysical properties such as: volume/density, ratio of specific heat to total hemispherical emissivity, surface tension, viscosity, electrical resistivity, and magnetic susceptibility. For measurements of electrical resistivity and magnetic susceptibility, a new method has been developed at ISU based on the tunnel diode oscillator (TDO) technique. The TDO technique uses the negative differential resistance of a tunnel diode to drive an LC tank circuit into self-sustained oscillation at the resonant LC frequency. The LC tank is inductively coupled to the samples under study, and changes in the electrical resistivity or magnetic susceptibility of the sample are manifested as changes in the resonant frequency. By measuring the frequency shifts of the TDO, insights can be made into changes in the material's electrical and magnetic properties. This method has been validated by performing resistivity measurements on a sample of high purity Zr, and by performing measurements on the ferromagnetic transition in a low-carbon steel ball bearing. In addition to the development of the laboratory and its supporting instrumentation, an effort has

  1. Cooperative Electrostatic Interactions Drive Functional Evolution in the Alkaline Phosphatase Superfamily

    PubMed Central

    2015-01-01

    It is becoming widely accepted that catalytic promiscuity, i.e., the ability of a single enzyme to catalyze the turnover of multiple, chemically distinct substrates, plays a key role in the evolution of new enzyme functions. In this context, the members of the alkaline phosphatase superfamily have been extensively studied as model systems in order to understand the phenomenon of enzyme multifunctionality. In the present work, we model the selectivity of two multiply promiscuous members of this superfamily, namely the phosphonate monoester hydrolases from Burkholderia caryophylli and Rhizobium leguminosarum. We have performed extensive simulations of the enzymatic reaction of both wild-type enzymes and several experimentally characterized mutants. Our computational models are in agreement with key experimental observables, such as the observed activities of the wild-type enzymes, qualitative interpretations of experimental pH-rate profiles, and activity trends among several active site mutants. In all cases the substrates of interest bind to the enzyme in similar conformations, with largely unperturbed transition states from their corresponding analogues in aqueous solution. Examination of transition-state geometries and the contribution of individual residues to the calculated activation barriers suggest that the broad promiscuity of these enzymes arises from cooperative electrostatic interactions in the active site, allowing each enzyme to adapt to the electrostatic needs of different substrates. By comparing the structural and electrostatic features of several alkaline phosphatases, we suggest that this phenomenon is a generalized feature driving selectivity and promiscuity within this superfamily and can be in turn used for artificial enzyme design. PMID:26091851

  2. Testing electrostatic complementarity in enzyme catalysis: hydrogen bonding in the ketosteroid isomerase oxyanion hole.

    PubMed

    Kraut, Daniel A; Sigala, Paul A; Pybus, Brandon; Liu, Corey W; Ringe, Dagmar; Petsko, Gregory A; Herschlag, Daniel

    2006-04-01

    A longstanding proposal in enzymology is that enzymes are electrostatically and geometrically complementary to the transition states of the reactions they catalyze and that this complementarity contributes to catalysis. Experimental evaluation of this contribution, however, has been difficult. We have systematically dissected the potential contribution to catalysis from electrostatic complementarity in ketosteroid isomerase. Phenolates, analogs of the transition state and reaction intermediate, bind and accept two hydrogen bonds in an active site oxyanion hole. The binding of substituted phenolates of constant molecular shape but increasing pK(a) models the charge accumulation in the oxyanion hole during the enzymatic reaction. As charge localization increases, the NMR chemical shifts of protons involved in oxyanion hole hydrogen bonds increase by 0.50-0.76 ppm/pK(a) unit, suggesting a bond shortening of 0.02 A/pK(a) unit. Nevertheless, there is little change in binding affinity across a series of substituted phenolates (DeltaDeltaG = -0.2 kcal/mol/pK(a) unit). The small effect of increased charge localization on affinity occurs despite the shortening of the hydrogen bonds and a large favorable change in binding enthalpy (DeltaDeltaH = -2.0 kcal/mol/pK(a) unit). This shallow dependence of binding affinity suggests that electrostatic complementarity in the oxyanion hole makes at most a modest contribution to catalysis of 300-fold. We propose that geometrical complementarity between the oxyanion hole hydrogen-bond donors and the transition state oxyanion provides a significant catalytic contribution, and suggest that KSI, like other enzymes, achieves its catalytic prowess through a combination of modest contributions from several mechanisms rather than from a single dominant contribution.

  3. Precipitation Measurements from Space: The Global Precipitation Measurement Mission

    NASA Technical Reports Server (NTRS)

    Hou, Arthur Y.

    2007-01-01

    Water is fundamental to the life on Earth and its phase transition between the gaseous, liquid, and solid states dominates the behavior of the weather/climate/ecological system. Precipitation, which converts atmospheric water vapor into rain and snow, is central to the global water cycle. It regulates the global energy balance through interactions with clouds and water vapor (the primary greenhouse gas), and also shapes global winds and dynamic transport through latent heat release. Surface precipitation affects soil moisture, ocean salinity, and land hydrology, thus linking fast atmospheric processes to the slower components of the climate system. Precipitation is also the primary source of freshwater in the world, which is facing an emerging freshwater crisis in many regions. Accurate and timely knowledge of global precipitation is essential for understanding the behavior of the global water cycle, improving freshwater management, and advancing predictive capabilities of high-impact weather events such as hurricanes, floods, droughts, and landslides. With limited rainfall networks on land and the impracticality of making extensive rainfall measurements over oceans, a comprehensive description of the space and time variability of global precipitation can only be achieved from the vantage point of space. This presentation will examine current capabilities in space-borne rainfall measurements, highlight scientific and practical benefits derived from these observations to date, and provide an overview of the multi-national Global Precipitation Measurement (GPM) Mission scheduled to bc launched in the early next decade.

  4. Further Conceptualization of Treatment Acceptability

    ERIC Educational Resources Information Center

    Carter, Stacy L.

    2008-01-01

    A review and extension of previous conceptualizations of treatment acceptability is provided in light of progress within the area of behavior treatment development and implementation. Factors including legislation, advances in research, and service delivery models are examined as to their relationship with a comprehensive conceptualization of…

  5. Acceptance and Commitment Therapy: Introduction

    ERIC Educational Resources Information Center

    Twohig, Michael P.

    2012-01-01

    This is the introductory article to a special series in Cognitive and Behavioral Practice on Acceptance and Commitment Therapy (ACT). Instead of each article herein reviewing the basics of ACT, this article contains that review. This article provides a description of where ACT fits within the larger category of cognitive behavior therapy (CBT):…

  6. Nitrogen trailer acceptance test report

    SciTech Connect

    Kostelnik, A.J.

    1996-02-12

    This Acceptance Test Report documents compliance with the requirements of specification WHC-S-0249. The equipment was tested according to WHC-SD-WM-ATP-108 Rev.0. The equipment being tested is a portable contained nitrogen supply. The test was conducted at Norco`s facility.

  7. Imaginary Companions and Peer Acceptance

    ERIC Educational Resources Information Center

    Gleason, Tracy R.

    2004-01-01

    Early research on imaginary companions suggests that children who create them do so to compensate for poor social relationships. Consequently, the peer acceptance of children with imaginary companions was compared to that of their peers. Sociometrics were conducted on 88 preschool-aged children; 11 had invisible companions, 16 had personified…

  8. Euthanasia Acceptance: An Attitudinal Inquiry.

    ERIC Educational Resources Information Center

    Klopfer, Fredrick J.; Price, William F.

    The study presented was conducted to examine potential relationships between attitudes regarding the dying process, including acceptance of euthanasia, and other attitudinal or demographic attributes. The data of the survey was comprised of responses given by 331 respondents to a door-to-door interview. Results are discussed in terms of preferred…

  9. Helping Our Children Accept Themselves.

    ERIC Educational Resources Information Center

    Gamble, Mae

    1984-01-01

    Parents of a child with muscular dystrophy recount their reactions to learning of the diagnosis, their gradual acceptance, and their son's resistance, which was gradually lessened when he was provided with more information and treated more normally as a member of the family. (CL)

  10. Design of [2]rotaxane through image threshold segmentation of electrostatic potential image.

    PubMed

    Liu, Pingying; Chen, Qiufeng; Ma, Jing

    2016-09-15

    An electrostatic potential (ESP)-based image segmentation method has been used to estimate the ability of proton donation and acceptance involved in ring-rod recognition. The relative binding strength of [2]rotaxane has also been further estimated from the difference of the characteristic image-segmentation derived ESP between proton donor and proton acceptor. The size and electrostatic compatibility criteria are introduced to guide the design of interlocked [2]rotaxane. A library of 75 thermodynamically stable [2]rotaxane candidates has been generated, including 16 experimentally known systems. The theoretical results for 16 experimentally known [2]rotaxanes are in good agreement with both the experimental association constants and density functional theory-calculated binding energies. Our ESP-based image segmentation model is also applicable to the tristable [2]rotaxane molecular shuttle as well as [1]rotaxane with self-inclusion function, indicating this simple method is generic in the field of constructing other supramolecular architectures formed with donor/acceptor molecular recognition. © 2016 Wiley Periodicals, Inc.

  11. Velocity measurement of pneumatically conveyed solid particles using an electrostatic sensor

    NASA Astrophysics Data System (ADS)

    Xu, C.; Zhou, B.; Yang, D.; Tang, G.; Wang, S.

    2008-02-01

    The paper proposes a method to measure the mean velocity of solid particles based on the spatial filtering effect of the electrostatic sensor. To determine the relationship between the spatial frequency characteristics of the sensor and solid particle velocity, a general formula is derived by analyzing quantitatively the spatial filtering characteristics of the electrostatic sensor along with the accepted assumptions. The effects of the geometric parameters of the sensor, particle velocity distribution, particle concentration distribution over the cross-section of a pneumatic pipeline, particle size, particle material type and frequency resolution on particle velocity measurement accuracy are also discussed in detail. Experiments are performed on a bench-scale gravity-fed particle flow experimental rig to test the performance of the velocity measurement system. The off-line experimental results show that the system repeatability is within ±5% over the velocity range of 2-6 m s-1 for concentrations of solid particles in the range of 0.5-6.0%.

  12. Identifying Anomality in Precipitation Processes

    NASA Astrophysics Data System (ADS)

    Jiang, P.; Zhang, Y.

    2014-12-01

    Safety, risk and economic analyses of engineering constructions such as storm sewer, street and urban drainage, and channel design are sensitive to precipitation storm properties. Whether the precipitation storm properties exhibit normal or anomalous characteristics remains obscure. In this study, we will decompose a precipitation time series as sequences of average storm intensity, storm duration and interstorm period to examine whether these sequences could be treated as a realization of a continuous time random walk with both "waiting times" (interstorm period) and "jump sizes" (average storm intensity and storm duration). Starting from this viewpoint, we will analyze the statistics of storm duration, interstorm period, and average storm intensity in four regions in southwestern United States. We will examine whether the probability distribution is temporal and spatial dependent. Finally, we will use fractional engine to capture the randomness in precipitation storms.

  13. Evaluation of Coupled Precipitator Two

    SciTech Connect

    Stone, M.E.

    1999-11-08

    The offline testing of the Coupled Precipitator Two (CP-2) has been completed. The tests were conducted and are documented. The tests were conducted at an offline test rack near the Drain Tube Test Stand facility in 672-T.

  14. WEATHER_Layered-Precipitable-Water

    Atmospheric Science Data Center

    2016-06-23

    ... TOVS (HIRS) clear sky radiances Radiosonde GPS (after 1995) AIRS Level 2 TPW and Layered PW Spatial ... Parameters:  Precipitable Water Order Data:  Earthdata Search:  Earthdata Search SCAR-B ...

  15. WEATHER_Total-Precipitable-Water

    Atmospheric Science Data Center

    2016-06-23

    ... TOVS (HIRS) clear sky radiances Radiosonde GPS (after 1995) AIRS Level 2 TPW and Layered PW Spatial ... Parameters:  Precipitable Water Order Data:  Earthdata Search:  Earthdata Search SCAR-B ...

  16. Environmental Radioactivity, Temperature, and Precipitation.

    ERIC Educational Resources Information Center

    Riland, Carson A.

    1996-01-01

    Reports that environmental radioactivity levels vary with temperature and precipitation and these effects are due to radon. Discusses the measurement of this environmental radioactivity and the theory behind it. (JRH)

  17. Silica Precipitation and Lithium Sorption

    SciTech Connect

    Jay Renew

    2015-09-20

    This file contains silica precipitation and lithium sorption data from the project. The silica removal data is corrected from the previous submission. The previous submission did not take into account the limit of detection of the ICP-MS procedure.

  18. Atmospheric science: Energy and precipitation

    NASA Astrophysics Data System (ADS)

    Donohoe, Aaron

    2016-12-01

    The latitude of the tropical rainbelt is constrained by the energy balance between hemispheres. An expansion of this theory that includes longitudinal variations of atmospheric heating can predict regional changes in tropical precipitation.

  19. The 2014 Silba Precipitation Extreme

    NASA Astrophysics Data System (ADS)

    Rasol, Dubravka; Ólafsson, Haraldur

    2015-04-01

    On 30 July 2014 a 24 h precipitation record of 218 mm was set at the island of Silba in the N-Adriatic Sea. The precipitation was of convective nature and significantly less precipitation was recorded only small distances away, at the coast of mainland Croatia. The event is reproduced numerically and discussed in terms of dynamics and predictability. On a large scale, the precipitation extreme was associated with a slow-moving upper tropospheric low that formed over the N-Atlantic several days earlier. At lower levels, there were humid mediterranean airmasses. On a smaller scale, there are indications that the extreme convection may have been triggered by an orographic disturbance.

  20. Oceanic Precipitation Measurement - Surface Validation

    NASA Astrophysics Data System (ADS)

    Klepp, Christian

    2013-04-01

    State-of-the-art satellite derived and reanalysis based precipitation climatologies still show remarkably large differences in frequency, amount, intensity, variability and temporal behavior of precipitation over the oceans. Additionally so far appropriate in-situ validation instruments were not available for shipboard use. The uncertainties are largest for light precipitation within the ITCZ and subtropics and for cold season high-latitude precipitation including mix-phase and snowfall. Hence, a long-term issue on which IPWG and GPM-GV is urging more attention is the provision of high quality surface validation data in oceanic areas using innovative ship-based instruments. Precipitation studies would greatly benefit from systematic dataset collection and analysis as such data could also be used to constrain precipitation retrievals. To achieve this goal, the KlimaCampus and Max Planck Institute for Meteorology in Hamburg, Germany funded this project that uses automated shipboard optical disdrometers, called Eigenbrodt ODM470, that are capable of measuring liquid and solid precipitation using drop size distributions in minute intervals on moving ships with high accuracy even under high wind speeds and rough sea states. Since the project start in 2009 the statistical basis for a conclusive validation has significantly improved with comprehensive data collection of more than 3 million minutes of precipitation measurements onboard six ships. Currently, six ODM470 instrument systems are available of which three are long-term mounted onboard the German research icebreaker R/V Polarstern (Alfred Wegner Institut) since June 2010, on R/V Akademik Ioffe (P.P.Shirshov Institute of Oceanology, Russian Academy of Sciences, Moscow, Russia) since September 2010 and on R/V Maria S. Merian (Brise Research, University of Hamburg) since December 2011. Three instruments are used for additional short-term shipboard campaigns and intercomparison projects. The core regions for these