Contamination avoidance devices for poppet type shutoff valves

NASA Technical Reports Server (NTRS)

Endicott, D. L.

1972-01-01

The technology required to provide acceptable contamination damage avoidance characteristics for poppet type shutoff valves is discussed. Evaluation of the contamination avoidance characteristics of the basic 1T32095 propellant shutoff valve, the cycle life performance of these valves in an uncontaminated environment, and the effectiveness of various auxiliary contamination avoidance devices when used in conjunction with these poppet type valves are included. In addition, a secondary objective is to evaluate two methods of monitoring the performance of the test valves during actual operations using acoustical monitoring instrumentation.

Low-lift-to-drag-ratio approach and landing studies using a CV-990 airplane

NASA Technical Reports Server (NTRS)

Kock, B. M.; Fulton, F. L.; Drinkwater, F. J., III

1972-01-01

The results are presented of a flight-test program utilizing a CV-990 airplane, flow in low-lift-to-drag-ratio (L/D) configurations, to simulate terminal area operation, approach, and landing of large unpowered vehicles. The results indicate that unpowered approaches and landings are practical with vehicles of the size and performance characteristics of the proposed shuttle vehicle. Low L/D landings provided touchdown dispersion patterns acceptable for operation on runways of reasonable length. The dispersion pattern was reduced when guidance was used during the final approach. High levels of pilot proficiency were not required for acceptable performance.

Registration of 'Prevail' hard red spring wheat

USDA-ARS?s Scientific Manuscript database

Grower and end-user acceptance of new Hard Red Spring Wheat (HRSW; Triticum aestivum L.) cultivars is largely contingent upon satisfactory agronomic performance, end-use quality potential, and disease resistance levels. Additional characteristics, such as desirable plant height, can also contribute...

Impacts of glutathione Maillard reaction products on sensory characteristics and consumer acceptability of beef soup.

PubMed

Hong, J H; Jung, D W; Kim, Y S; Lee, S M; Kim, K O

2010-10-01

The sensory characteristics and consumer acceptability of beef soup with added glutathione Maillard reaction products (GMRPs) were investigated to examine the effects of the GMRPs on beef-soup flavor compared to soups made with glutathione (GSH) and monosodium glutamate (MSG), a control (CON), or a control soup made with 150% beef content (CON150). The sensory characteristics of the beef soups were examined by descriptive analysis. The overall acceptabilities of the beef soups were rated by consumers. Principal component analysis was performed on descriptive data as explanatory variables with overall acceptability as a supplementary variable to observe the relationships between the descriptive data and consumer acceptability, as well as the relationships between the beef-soup samples and their sensory attributes. The samples containing GMRPs had "beef flavor" that was stronger than the CON and MSG samples, and comparable to that of the GSH sample and CON150. The GMRP samples had stronger "green onion flavor,"garlic flavor," and "boiled egg white flavor" than the other samples. The beef soup containing MSG was preferred to CON, CON150, and GSH. The samples with GMRPs were least favored because of their pronounced metallic and astringent notes. The results of this study imply the feasibility of GMRPs as a flavor enhancer since the soups containing these compounds showed more complex flavor profiles than GSH. However, future studies are required to optimize the MR conditions that produce GMRPs without undesirable characteristics. Practical Application: This study examined the practicability of the Maillard reaction products between glutathione (GSH) and glucose (GP) or fructose (FP) as a flavor enhancer by investigating the sensory characteristics and consumer acceptability evoked by them in a beef-soup system. This study helps flavor and food industry to develop a new flavor enhancer by providing practical information, such as beef flavor-enhancing effect of FP and GP compared to that by increasing beef content or adding GSH or MSG. In addition, it is expected that the outcome of this study, such as sensory attributes of and consumer responses to GSH Maillard reaction products, compliments previous studies that mostly focused on chemical analysis of Maillard reaction.

Acceptance of homosexuality through education? Investigating the role of education, family background and individual characteristics in the United Kingdom.

PubMed

la Roi, Chaïm; Mandemakers, Jornt J

2018-03-01

Higher educated people tend to be more accepting of homosexuality than lower educated people. This has inspired claims that education leads to a higher acceptance of homosexuality. Alternatively, the association between education and acceptance of homosexuality could be confounded by (un)observed family background and stable individual characteristics. This study investigated the association between education and acceptance of homosexuality and the role of potential confounders in a unique longitudinal sample of British siblings. Multilevel and fixed effects analyses show that both perspectives apply. A large part of the association between education and acceptance of homosexuality could be attributed to family background and observed individual characteristics (one third), as well as unobserved individual characteristics (an additional third), but the positive association remains. Findings are discussed in light of existing explanations regarding the effect of education on the acceptance of homosexuality. Copyright © 2017 Elsevier Inc. All rights reserved.

Estimation of Streamflow Characteristics for Charles M. Russell National Wildlife Refuge, Northeastern Montana

USGS Publications Warehouse

Sando, Steven K.; Morgan, Timothy J.; Dutton, DeAnn M.; McCarthy, Peter M.

2009-01-01

Charles M. Russell National Wildlife Refuge (CMR) encompasses about 1.1 million acres (including Fort Peck Reservoir on the Missouri River) in northeastern Montana. To ensure that sufficient streamflow remains in the tributary streams to maintain the riparian corridors, the U.S. Fish and Wildlife Service is negotiating water-rights issues with the Reserved Water Rights Compact Commission of Montana. The U.S. Geological Survey, in cooperation with the U.S. Fish and Wildlife Service, conducted a study to gage, for a short period, selected streams that cross CMR, and analyze data to estimate long-term streamflow characteristics for CMR. The long-term streamflow characteristics of primary interest include the monthly and annual 90-, 80-, 50-, and 20-percent exceedance streamflows and mean streamflows (Q.90, Q.80, Q.50, Q.20, and QM, respectively), and the 1.5-, 2-, and 2.33- year peak flows (PK1.5, PK2, and PK2.33, respectively). The Regional Adjustment Relationship (RAR) was investigated for estimating the monthly and annual Q.90, Q.80, Q.50, Q.20, and QM, and the PK1.5, PK2, and PK2.33 for the short-term CMR gaging stations (hereinafter referred to as CMR stations). The RAR was determined to provide acceptable results for estimating the long-term Q.90, Q.80, Q.50, Q.20, and QM on a monthly basis for the months of March through June, and also on an annual basis. For the months of September through January, the RAR regression equations did not provide acceptable results for any long-term streamflow characteristic. For the month of February, the RAR regression equations provided acceptable results for the long-term Q.50 and QM, but poor results for the long-term Q.90, Q.80, and Q.20. For the months of July and August, the RAR provided acceptable results for the long-term Q.50, Q.20, and QM, but poor results for the long-term Q.90 and Q.80. Estimation coefficients were developed for estimating the long-term streamflow characteristics for which the RAR did not provide acceptable results. The RAR also was determined to provide acceptable results for estimating the PK1.5., PK2, and PK2.33 for the three CMR stations that lacked suitable peak-flow records. Methods for estimating streamflow characteristics at ungaged sites also were derived. Regression analyses that relate individual streamflow characteristics to various basin and climatic characteristics for gaging stations were performed to develop regression equations to estimate streamflow characteristics at ungaged sites. Final equations for the annual Q.50, Q.20, and QM are reported. Acceptable equations also were developed for estimating QM for the months of February, March, April, June, and July, and Q.50, Q.20, and QM on an annual basis. However, equations for QM for the months of February, March, April, June, and July were determined to be less consistent and reliable than the use of estimation coefficients applied to the regression equation results for the annual QM. Acceptable regression equations also were developed for the PK1.5, PK2, and PK2.33.

SeaWiFS technical report series. Volume 22: Prelaunch acceptance report for the SeaWFS radiometer

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine, R. (Editor); Barnes, Robert A.; Barnes, William L.; Esaias, Wayne E.; Mcclain, Charles R.; Acker, James G. (Editor)

1994-01-01

The final acceptance, or rejection, of the Sea-viewing Wide field-of-view Sensor (SeaWiFS) will be determined by the instrument's on-orbit operation. There is, however, an extensive set of laboratory measurements describing the operating characteristics of the radiometer. Many of the requirements in the Ocean Color Data Mission (OCDM) specifications can be checked only by laboratory measurements. Here, the calibration review panel (composed of the authors of this technical memorandum) examines the laboratory characterization and calibration of SeaWiFS in the light of the OCDM performance specification. Overall, the performance of the SeaWiFS instrument meets or exceeds the requirements of the OCDM contract in all but a few unimportant details. The detailed results of this examination are presented here by following the outline of the specifications, as found in the Contract. The results are presented in the form of requirements and compliance pairs. These results give conclusions on many, but not all, of the performance specifications. The acceptance of this panel of the performance of SeaWiFS must only be considered as an intermediate conclusion. The ultimate acceptance (or rejection) of the SeaWiFS data set will rely on the measurements made by the instrument on orbit.

Control system health test system and method

DOEpatents

Hoff, Brian D.; Johnson, Kris W.; Akasam, Sivaprasad; Baker, Thomas M.

2006-08-15

A method is provided for testing multiple elements of a work machine, including a control system, a component, a sub-component that is influenced by operations of the component, and a sensor that monitors a characteristic of the sub-component. In one embodiment, the method is performed by the control system and includes sending a command to the component to adjust a first parameter associated with an operation of the component. Also, the method includes detecting a sensor signal from the sensor reflecting a second parameter associated with a characteristic of the sub-component and determining whether the second parameter is acceptable based on the command. The control system may diagnose at least one of the elements of the work machine when the second parameter of the sub-component is not acceptable.

Multiple-sip temporal dominance of sensations associated with acceptance test: a study on special beers.

PubMed

Corrêa Simioni, Síntia Carla; Ribeiro, Michele Nayara; de Souza, Vanessa Rios; Nunes, Cleiton Antônio; Pinheiro, Ana Carla Marques

2018-03-01

In this study, we proposed the use of a multiple-sip temporal dominance of sensations (TDS) test alongside with an acceptance test over repeated consumption for the analysis of special beers, with the aim of contributing to a deeper understanding of consumer behavior regarding temporal descriptions and sensory acceptance. Consumers of special beers sequentially evaluated six sips of a particular type of beer by TDS analysis and an acceptance test was performed for each sip. Four different kinds of specialty beers were evaluated [Bohemian Pilsner (BP), Witbier (WB), Belgian Strong Ale Dubbel (BD), and Russian Imperial Stout (RS)]. In general, the descriptive profile of beers varied temporally, i.e., there was an increased dominance of bitterness and a decreased dominance of fruity, floral, toffee, and coffee attributes. Concurrently, a reduction in sensory acceptance with an increased number of sips, especially the last sip, was observed in two kinds of beers that possessed a strong flavor, BD and RS. BP and WB presented smooth attributes and low notable characteristics, which could have contributed to the maintenance of the acceptance grades as the number of sips increased. The combination of TDS and acceptance over repeated sips can be useful for obtaining detailed descriptions of products that are closer to real time consumption by consumers, and thus aids in ensuring good product performance once released. The information obtained can also help product development scientists to fine-tune product formulations and ensure acceptability.

Entry dynamics of space shuttle orbiter with longitudinal stability and control uncertainties at supersonic and hypersonic speeds

NASA Technical Reports Server (NTRS)

Stone, H. W.; Powell, R. W.

1977-01-01

A six-degree-of-freedom simulation analysis was conducted to examine the effects of longitudinal static aerodynamic stability and control uncertainties on the performance of the space shuttle orbiter automatic (no manual inputs) entry guidance and control systems. To establish the acceptable boundaries, the static aerodynamic characteristics were varied either by applying a multiplier to the aerodynamic parameter or by adding an increment. With either of two previously identified control system modifications included, the acceptable longitudinal aerodynamic boundaries were determined.

Simulator study of flight characteristics of a large twin-fuselage cargo transport airplane during approach and landing

NASA Technical Reports Server (NTRS)

Grantham, W. D.; Deal, P. L.; Keyser, G. L., Jr.; Smith, P. M.

1983-01-01

A six degree-of-freedom, ground-based simulator study was conducted to evaluate the low speed flight characteristics of a twin fuselage cargo transport airplane and to compare these characteristics with those of a large, single fuselage (reference) transport configuration which was similar to the Lockheed C-5C airplane. The primary piloting task was the approach and landing. The results indicated that in order to achieve "acceptable' low speed handling qualities on the twin fuselage concept, considerable stability and control augmentation was required, and although the augmented airplane could be landed safely under adverse conditions, the roll performance of the aircraft had to be improved appreciably before the handling qualities were rated as being "satisfactory.' These ground-based simulation results indicated that a value of t sub phi = 30 (time required to bank 30 deg) less than 6 sec should result in "acceptable' roll response characteristics, and when t sub phi = 30 is less than 3.8 sec, "satisfactory' roll response should be attainable on such large and unusually configured aircraft as the subject twin fuselage cargo transport concept.

Effective Use of New Communication Technologies.

ERIC Educational Resources Information Center

Fauley, Franz E.

Until the last two or three years, three forces inhibited the acceptance of computer-assisted instruction (CAI). These were the fear on the part of traditional trainers of displacement by machines, the poor quality of existing courseware and limited capability of accompanying hardware, and the poor price and performance characteristics of existing…

Can soft biometric traits assist user recognition?

NASA Astrophysics Data System (ADS)

Jain, Anil K.; Dass, Sarat C.; Nandakumar, Karthik

2004-08-01

Biometrics is rapidly gaining acceptance as the technology that can meet the ever increasing need for security in critical applications. Biometric systems automatically recognize individuals based on their physiological and behavioral characteristics. Hence, the fundamental requirement of any biometric recognition system is a human trait having several desirable properties like universality, distinctiveness, permanence, collectability, acceptability, and resistance to circumvention. However, a human characteristic that possesses all these properties has not yet been identified. As a result, none of the existing biometric systems provide perfect recognition and there is a scope for improving the performance of these systems. Although characteristics like gender, ethnicity, age, height, weight and eye color are not unique and reliable, they provide some information about the user. We refer to these characteristics as "soft" biometric traits and argue that these traits can complement the identity information provided by the primary biometric identifiers like fingerprint and face. This paper presents the motivation for utilizing soft biometric information and analyzes how the soft biometric traits can be automatically extracted and incorporated in the decision making process of the primary biometric system. Preliminary experiments were conducted on a fingerprint database of 160 users by synthetically generating soft biometric traits like gender, ethnicity, and height based on known statistics. The results show that the use of additional soft biometric user information significantly improves (approximately 6%) the recognition performance of the fingerprint biometric system.

Reasons for accepting or declining Down syndrome screening in Dutch prospective mothers within the context of national policy and healthcare system characteristics: a qualitative study.

PubMed

Crombag, Neeltje M T H; Boeije, Hennie; Iedema-Kuiper, Rita; Schielen, Peter C J I; Visser, Gerard H A; Bensing, Jozien M

2016-05-26

Uptake rates for Down syndrome screening in the Netherlands are low compared to other European countries. To investigate the low uptake, we explored women's reasons for participation and possible influences of national healthcare system characteristics. Dutch prenatal care is characterised by an approach aimed at a low degree of medicalisation, with pregnant women initially considered to be at low risk. Prenatal screening for Down syndrome is offered to all women, with a 'right not to know' for women who do not want to be informed on this screening. At the time this study was performed, the test was not reimbursed for women aged 35 and younger. We conducted a qualitative study to explore reasons for participation and possible influences of healthcare system characteristics. Data were collected via ten semi-structured focus groups with women declining or accepting the offer of Down syndrome screening (n = 46). All focus groups were audio- and videotaped, transcribed verbatim, coded and content analysed. Women declining Down syndrome screening did not consider Down syndrome a condition severe enough to justify termination of pregnancy. Young women declining felt supported in their decision by perceived confirmation of their obstetric caregiver and reassured by system characteristics (costs and age restriction). Women accepting Down syndrome screening mainly wanted to be reassured or be prepared to care for a child with Down syndrome. By weighing up the pros and cons of testing, obstetric caregivers supported young women who accepted in the decision-making process. This was helpful, although some felt the need to defend their decision to accept the test offer due to their young age. For some young women accepting testing, costs were considered a disincentive to participate. Presentation of prenatal screening affects how the offer is attended to, perceived and utilised. By offering screening with age restriction and additional costs, declining is considered the preferred choice, which might account for low Dutch uptake rates. Autonomous and informed decision-making in Down syndrome screening should be based on the personal interest in knowing the individual risk of having a child with Down syndrome and system characteristics should not influence participation.

Strategic Performance Management Evaluation for the Navy’s Splice Local Area Networks.

DTIC Science & Technology

1985-04-01

Communications Agency (DCA)/Federal Data Corporation (FDC) literature; an extensive survey of academic and professional book and article literature... interesting closing note on strategic planning characteristics is that the period during which collapse or disaster develops is of the same order as the...accepted set of standards. In computer performance, such things as paging rates , throughput, input/output channel usage, turnaround * 32 EM-. time

Bay-annulated indigo (BAI) as an excellent electron accepting building block for high performance organic semiconductors

DOEpatents

Liu, Yi; He, Bo; Pun, Andrew

2015-11-24

A novel electron acceptor based on bay-annulated indigo (BAI) was synthesized and used for the preparation of a series of high performance donor-acceptor small molecules and polymers. The resulting materials possess low-lying LUMO energy level and small HOMO-LUMO gaps, while their films exhibited high crystallinity upon thermal treatment, commensurate with high field effect mobilities and ambipolar transfer characteristics.

Bay-annulated indigo (BAI) as an excellent electron accepting building block for high performance organic semiconductors

DOEpatents

Liu, Yi; He, Bo; Pun, Andrew

2016-04-19

A novel electron acceptor based on bay-annulated indigo (BAI) was synthesized and used for the preparation of a series of high performance donor-acceptor small molecules and polymers. The resulting materials possess low-lying LUMO energy level and small HOMO-LUMO gaps, while their films exhibited high crystallinity upon thermal treatment, commensurate with high field effect mobilities and ambipolar transfer characteristics.

A systematic review of patient acceptance of consumer health information technology.

PubMed

Or, Calvin K L; Karsh, Ben-Tzion

2009-01-01

A systematic literature review was performed to identify variables promoting consumer health information technology (CHIT) acceptance among patients. The electronic bibliographic databases Web of Science, Business Source Elite, CINAHL, Communication and Mass Media Complete, MEDLINE, PsycArticles, and PsycInfo were searched. A cited reference search of articles meeting the inclusion criteria was also conducted to reduce misses. Fifty-two articles met the selection criteria. Among them, 94 different variables were tested for associations with acceptance. Most of those tested (71%) were patient factors, including sociodemographic characteristics, health- and treatment-related variables, and prior experience or exposure to computer/health technology. Only ten variables were related to human-technology interaction; 16 were organizational factors; and one was related to the environment. In total, 62 (66%) were found to predict acceptance in at least one study. Existing literature focused largely on patient-related factors. No studies examined the impact of social and task factors on acceptance, and few tested the effects of organizational or environmental factors on acceptance. Future research guided by technology acceptance theories should fill those gaps to improve our understanding of patient CHIT acceptance, which in turn could lead to better CHIT design and implementation.

Analytical criteria for performance characteristics of IgE binding methods for evaluating safety of biotech food products.

PubMed

Holzhauser, Thomas; Ree, Ronald van; Poulsen, Lars K; Bannon, Gary A

2008-10-01

There is detailed guidance on how to perform bioinformatic analyses and enzymatic degradation studies for genetically modified crops under consideration for approval by regulatory agencies; however, there is no consensus in the scientific community on the details of how to perform IgE serum studies. IgE serum studies are an important safety component to acceptance of genetically modified crops when the introduced protein is novel, the introduced protein is similar to known allergens, or the crop is allergenic. In this manuscript, we describe the characteristics of the reagents, validation of assay performance, and data analysis necessary to optimize the information obtained from serum testing of novel proteins and genetically modified (GM) crops and to make results more accurate and comparable between different investigations.

Effect of Background Pressure on the Plasma Oscillation Characteristics of the HiVHAc Hall Thruster

NASA Technical Reports Server (NTRS)

Huang, Wensheng; Kamhawi, Hani; Lobbia, Robert B.; Brown, Daniel L.

2014-01-01

During a component compatibility test of the NASA HiVHAc Hall thruster, a number of plasma diagnostics were implemented to study the effect of varying facility background pressure on thruster operation. These diagnostics characterized the thruster performance, the plume, and the plasma oscillations in the thruster. Thruster performance and plume characteristics as functions of background pressure were previously published. This paper focuses on changes in the plasma oscillation characteristics with changing background pressure. The diagnostics used to study plasma oscillations include a high-speed camera and a set of high-speed Langmuir probes. The results show a rise in the oscillation frequency of the "breathing" mode with rising background pressure, which is hypothesized to be due to a shortening acceleration/ionization zone. An attempt is made to apply a simplified ingestion model to the data. The combined results are used to estimate the maximum acceptable background pressure for performance and wear testing.

Experimental Evaluation of a Low Emissions High Performance Duct Burner for Variable Cycle Engines (VCE)

NASA Technical Reports Server (NTRS)

Lohmann, R. P.; Mador, R. J.

1979-01-01

An evaluation was conducted with a three stage Vorbix duct burner to determine the performance and emissions characteristics of the concept and to refine the configuration to provide acceptable durability and operational characteristics for its use in the variable cycle engine (VCE) testbed program. The tests were conducted at representative takeoff, transonic climb, and supersonic cruise inlet conditions for the VSCE-502B study engine. The test stand, the emissions sampling and analysis equipment, and the supporting flow visualization rigs are described. The performance parameters including the fuel-air ratio, the combustion efficiency/exit temperature, thrust efficiency, and gaseous emissions calculations are defined. The test procedures are reviewed and the results are discussed.

Moving beyond pain scores: Multidimensional pain assessment is essential for adequate pain management after surgery

PubMed Central

Vissers, Kris C. P.; van der Sande, Rob; Bronkhorst, Ewald; Lerou, Jos G. C.; Steegers, Monique A. H.

2017-01-01

Background Clinical experience teaches us that patients are willing to accept postoperative pain, despite high pain intensity scores. Nevertheless, relationships between pain scores and other methods of pain assessment, e.g. acceptability of pain or its interference with physical functioning, are not fully established. Our aims were to examine these relationships. Methods A cross-sectional study was conducted on patients who underwent major surgery between January 2008 and August 2013. Using logistic regression, we quantified the relationships between movement-evoked pain scores on the numerical rating scale (NRS-MEP) and three dichotomous dependent variables: patient’s opinion on acceptability of pain (PO: acceptable or unacceptable pain); nurses’ observation of patient’s performance of necessary activities to expedite recovery (NO: good or bad performance); a compound measure judging the presence of the clinically desirable situation of acceptable pain associated with good patients’ performance (PONO: present or not). Using Receiver Operating Characteristics (ROC) analysis, NRS cut-off points were determined such that they best discriminate between patients having one versus the other outcome for PO, NO and PONO. Results 15,394 assessments were obtained in 9,082 patients in the first three postoperative days. Nine percent of the patients had unacceptable pain while having an NRS-MEP of 0–4. An estimated 47% (95%CI = 45%-49%) of patients with an NRS-MEP of 7 described their pain as acceptable on day one. Moreover, 33% (31%-35%) performed all required physical activities, and 22% (21%-24%) combined acceptable pain with appropriate movement. NRS cut-off points for PO, NO and PONO were five, four and four, respectively, but had insufficient discriminatory power. Conclusions Our results suggest pain management should be guided by the many dimensions of the patient’s pain experience, not solely by NRS cut-off points. Future research should evaluate the impact of such multidimensional pain assessment on patients’ functional outcome. PMID:28489926

Improved, low cost inorganic-organic separators for rechargeable silver-zinc batteries

NASA Technical Reports Server (NTRS)

Sheibley, D. W.

1979-01-01

Several flexible, low-cost inorganic-organic separators with performance characteristics and cycle life equal to, or better than, the Lewis Research Center Astropower separator were developed. These new separators can be made on continuous-production equipment at about one-fourth the cost of the Astropower separator produced the same way. In test cells, these new separators demonstrate cycle life improvement, acceptable operating characteristics, and uniform current density. The various separator formulas, test cell construction, and data analysis are described.

Five Social Disadvantages That Depress Student Performance: Why Schools Alone Can't Close Achievement Gaps. Report

ERIC Educational Resources Information Center

Morsy, Leila; Rothstein, Richard

2015-01-01

That students' social and economic characteristics shape their cognitive and behavioral outcomes is well established, yet policymakers typically resist accepting that non-school disadvantages necessarily depress outcomes. Rather, they look to better schools and teachers to close achievement gaps, and consistently come up short. This report…

Cardiovascular disease testing on the Dimension Vista system: biomarkers of acute coronary syndromes.

PubMed

Kelley, Walter E; Lockwood, Christina M; Cervelli, Denise R; Sterner, Jamie; Scott, Mitchell G; Duh, Show-Hong; Christenson, Robert H

2009-09-01

Performance characteristics of the LOCI cTnI, CK-MB, MYO, NTproBNP and hsCRP methods on the Dimension Vista System were evaluated. Imprecision (following CLSI EP05-A2 guidelines), limit of quantitation (cTnI), limit of blank, linearity on dilution, serum versus plasma matrix studies (cTnI), and method comparison studies were conducted. Method imprecision of 1.8 to 9.7% (cTnI), 1.8 to 5.7% (CK-MB), 2.1 to 2.2% (MYO), 1.6 to 3.3% (NTproBNP), and 3.5 to 4.2% (hsCRP) were demonstrated. The manufacturer's claimed imprecision, detection limits and upper measurement limits were met. Limit of Quantitation was 0.040 ng/mL for the cTnI assay. Agreement of serum and plasma values for cTnI (r=0.99) was shown. Method comparison study results were acceptable. The Dimension Vista cTnI, CK-MB, MYO, NTproBNP, and hsCRP methods demonstrate acceptable performance characteristics for use as an aid in the diagnosis and risk assessment of patients presenting with suspected acute coronary syndromes.

[Acceptance and rejection of vasectomy in rural males].

PubMed

García Moreno, Juan; Solano Sainos, Luis Miguel

2005-01-01

One problem in rural population is the gap between coverage of contraception and scant masculine participation, which could be due to lack of information of to other sociocultural factors. We investigated, in two stages, the characteristics or the profile of the sexual and reproductive behavior of males in an exploratory study by means of focus groups to determine their relevant motivations and characteristics and subsequently, a structured questionnaire to ascertain the magnitude of the factors explored. The population corresponded to zones of rural hospital medical services zones of medical services in seven ethnic groups of the Mexican Republic and included men who accepted and who rejected vasectomy. The profile of males who accepted vasectomy allowed to determine that there exist a unsatisfied demand for contraceptive protection and the desire of not having additional children; in addition, we found that the decision to accept vasectomy is determined to a greater extent for reasons different from that of information on the contraceptive method. The important proportion of males who were non-users of contraceptive methods who accepted vasectomy supposed information on contraception to be the most consistent reason; nonetheless, this information was not considered sufficient and timely; thus, adverse economic situation, a certain condition related with the couple such as health or love for the female partner are the more weighty reasons for deciding to accept vasectomy, while the fear of poor sexual performance is the most powerful factor for rejection of vasectomy. Masculine participation in family planning is a factor that conditions contraceptive coverage and its respective benefits. The profile of the male who accepts vasectomy aids in identifying candidates forthe procedure and in reducing unsatisfied demand. Greater diffusion of information of the contraceptive method of vasectomy, greater links between male needs and vasectomy, and maintaining or increasing access to family planning are required.

User Acceptance of Wrist-Worn Activity Trackers Among Community-Dwelling Older Adults: Mixed Method Study

PubMed Central

Puri, Arjun; Kim, Ben; Nguyen, Olivier; Stolee, Paul; Tung, James

2017-01-01

Background Wearable activity trackers are newly emerging technologies with the anticipation for successfully supporting aging-in-place. Consumer-grade wearable activity trackers are increasingly ubiquitous in the market, but the attitudes toward, as well as acceptance and voluntary use of, these trackers in older population are poorly understood. Objective The aim of this study was to assess acceptance and usage of wearable activity trackers in Canadian community-dwelling older adults, using the potentially influential factors as identified in literature and technology acceptance model. Methods A mixed methods design was used. A total of 20 older adults aged 55 years and older were recruited from Southwestern Ontario. Participants used 2 different wearable activity trackers (Xiaomi Mi Band and Microsoft Band) separately for each segment in the crossover design study for 21 days (ie, 42 days total). A questionnaire was developed to capture acceptance and experience at the end of each segment, representing 2 different devices. Semistructured interviews were conducted with 4 participants, and a content analysis was performed. Results Participants ranged in age from 55 years to 84 years (mean age: 64 years). The Mi Band gained higher levels of acceptance (16/20, 80%) compared with the Microsoft Band (10/20, 50%). The equipment characteristics dimension scored significantly higher for the Mi Band (P<.05). The amount a participant was willing to pay for the device was highly associated with technology acceptance (P<.05). Multivariate logistic regression with 3 covariates resulted in an area under the curve of 0.79. Content analysis resulted in the formation of the following main themes: (1) smartphones as facilitators of wearable activity trackers; (2) privacy is less of a concern for wearable activity trackers, (3) value proposition: self-awareness and motivation; (4) subjective norm, social support, and sense of independence; and (5) equipment characteristics matter: display, battery, comfort, and aesthetics. Conclusions Older adults were mostly accepting of wearable activity trackers, and they had a clear understanding of its value for their lives. Wearable activity trackers were uniquely considered more personal than other types of technologies, thereby the equipment characteristics including comfort, aesthetics, and price had a significant impact on the acceptance. Results indicated that privacy was less of concern for older adults, but it may have stemmed from a lack of understanding of the privacy risks and implications. These findings add to emerging research that investigates acceptance and factors that may influence acceptance of wearable activity trackers among older adults. PMID:29141837

Developmental and Environmental Influences on Young Children’s Vegetable Preferences and Consumption123

PubMed Central

2016-01-01

Food intake patterns begin to be shaped at the earliest points in life. Early exposures and experiences are critical for the acceptance of some foods, particularly healthful foods such as vegetables, which often have a bitter component in their flavor profiles. In addition to repeated exposure to these foods, the quality and emotional tone of parent-child interactions are important in facilitating children’s acceptance of vegetables. During early childhood, parents are challenged by children’s developmental characteristics related to eating, such as the emergence of child neophobia, and by individual characteristics of the child that are more biologically based, including genetic predispositions to bitter taste and sensory sensitivities. Experimental studies consistently show that repeated exposure to novel and rejected familiar foods is the most powerful method to improve acceptance. However, the manner and persistence with which these exposures are performed are critical. Research investigating influences on children’s vegetable acceptance and ingestion has focused on associations among availability, parent intakes, child neophobia, and the parental feeding response to children’s reluctance to try and consume vegetables. Because young children’s dietary intakes are low and below dietary recommendations, investigations have focused more on factors that impede children’s vegetable acceptance, such as controlling feeding practices, than on positive influences. Research that addresses the multifaceted nature of these interactions among different levels of social-ecological environment, individual traits, parental feeding styles and practices, and socioeconomic influences and that uses longitudinal designs and complex statistical approaches is called for to ascertain more effective methods to improve children’s vegetable acceptance. PMID:26773030

Developmental and Environmental Influences on Young Children's Vegetable Preferences and Consumption.

PubMed

Johnson, Susan L

2016-01-01

Food intake patterns begin to be shaped at the earliest points in life. Early exposures and experiences are critical for the acceptance of some foods, particularly healthful foods such as vegetables, which often have a bitter component in their flavor profiles. In addition to repeated exposure to these foods, the quality and emotional tone of parent-child interactions are important in facilitating children's acceptance of vegetables. During early childhood, parents are challenged by children's developmental characteristics related to eating, such as the emergence of child neophobia, and by individual characteristics of the child that are more biologically based, including genetic predispositions to bitter taste and sensory sensitivities. Experimental studies consistently show that repeated exposure to novel and rejected familiar foods is the most powerful method to improve acceptance. However, the manner and persistence with which these exposures are performed are critical. Research investigating influences on children's vegetable acceptance and ingestion has focused on associations among availability, parent intakes, child neophobia, and the parental feeding response to children's reluctance to try and consume vegetables. Because young children's dietary intakes are low and below dietary recommendations, investigations have focused more on factors that impede children's vegetable acceptance, such as controlling feeding practices, than on positive influences. Research that addresses the multifaceted nature of these interactions among different levels of social-ecological environment, individual traits, parental feeding styles and practices, and socioeconomic influences and that uses longitudinal designs and complex statistical approaches is called for to ascertain more effective methods to improve children's vegetable acceptance. © 2016 American Society for Nutrition.

Potential of hydrogen fuel for future air transportation systems.

NASA Technical Reports Server (NTRS)

Small, W. J.; Fetterman, D. E.; Bonner, T. F., Jr.

1973-01-01

Recent studies have shown that hydrogen fuel can yield spectacular improvements in aircraft performance in addition to its more widely discussed environmental advantages. The characteristics of subsonic, supersonic, and hypersonic transport aircraft using hydrogen fuel are discussed, and their performance and environmental impact are compared to that of similar aircraft using conventional fuel. The possibilities of developing hydrogen-fueled supersonic and hypersonic vehicles with sonic boom levels acceptable for overland flight are also explored.

Entry dynamics of space shuttle orbiter with lateral-directional stability and control uncertainties at supersonic and hypersonic speeds

NASA Technical Reports Server (NTRS)

Stone, H. W.; Powell, R. W.

1977-01-01

A six-degree-of-freedom simulation analysis was conducted to examine the effects of the lateral-directional static aerodynamic stability and control uncertainties on the performance of the automatic (no manual inputs) entry-guidance and control systems of the space shuttle orbiter. To establish the acceptable boundaries of the uncertainties, the static aerodynamic characteristics were varied either by applying a multiplier to the aerodynamic parameter or by adding an increment. Control-system modifications were identified that decrease the sensitivity to off-nominal aerodynamics. With these modifications, the acceptable aerodynamic boundaries were determined.

Using conjoint analysis to measure the acceptability of rectal microbicides among men who have sex with men in four South American cities.

PubMed

Kinsler, Janni J; Cunningham, William E; Nureña, César R; Nadjat-Haiem, Carsten; Grinsztejn, Beatriz; Casapia, Martin; Montoya-Herrera, Orlando; Sánchez, Jorge; Galea, Jerome T

2012-08-01

Conjoint Analysis (CJA), a statistical market-based technique that assesses the value consumers place on product characteristics, may be used to predict acceptability of hypothetical products. Rectal Microbicides (RM)-substances that would prevent HIV infection during receptive anal intercourse-will require acceptability data from potential users in multiple settings to inform the development process by providing valuable information on desirable product characteristics and issues surrounding potential barriers to product use. This study applied CJA to explore the acceptability of eight different hypothetical RM among 128 MSM in Lima and Iquitos, Peru; Guayaquil, Ecuador; and Rio de Janeiro, Brazil. Overall RM acceptability was highest in Guayaquil and lowest in Rio. Product effectiveness had the greatest impact on acceptability in all four cities, but the impact of other product characteristics varied by city. This study demonstrates that MSM from the same region but from different cities place different values on RM characteristics that could impact uptake of an actual RM. Understanding specific consumer preferences is crucial during RM product development, clinical trials and eventual product dissemination.

Advanced Propulsion System Studies in High Speed Research

NASA Technical Reports Server (NTRS)

Zola, Charles L.

2000-01-01

Propulsion for acceptable supersonic passenger transport aircraft is primarily impacted by the very high jet noise characteristics of otherwise attractive engines. The mixed flow turbofan, when equipped with a special ejector nozzle seems to be the best candidate engine for this task of combining low jet noise with acceptable flight performance. Design, performance, and operation aspects of mixed flow turbofans are discussed. If the special silencing nozzle is too large, too heavy, or not as effective as expected, alternative concepts in mixed flow engines should be examined. Presented herein is a brief summary of efforts performed under cooperative agreement NCC3-193. Three alternative engine concepts, conceived during this study effort, are herein presented and their limitations and potentials are described. These three concepts intentionally avoid the use of special silencing nozzles and achieve low jet noise by airflow augmentation of the engine cycle.

Performance and optimization of a derated ion thruster for auxiliary propulsion

NASA Technical Reports Server (NTRS)

Patterson, Michael J.; Foster, John E.

1991-01-01

The characteristics and implications of use of a derated ion thruster for north-south stationkeeping (NSSK) propulsion are discussed. A derated thruster is a 30 cm diameter primary propulsion ion thruster operated at highly throttled conditions appropriate to NSSK functions. The performance characteristics of a 30 cm ion thruster are presented, emphasizing throttled operation at low specific impulse and high thrust-to-power ratio. Performance data and component erosion are compared to other NSSK ion thrusters. Operations benefits derived from the performance advantages of the derated approach are examined assuming an INTELSAt 7-type spacecraft. Minimum ground test facility pumping capabilities required to maintain facility enhanced accelerator grid erosion at acceptable levels in a lifetest are quantified as a function of thruster operating condition. Approaches to reducing the derated thruster mass and volume are also discussed.

Project One Hundred Thousand; Characteristics and Performance of "New Standards" Men. Description of Project One Hundred Thousand.

ERIC Educational Resources Information Center

Office of the Assistant Secretary of Defense for Manpower and Reserve Affairs (DOD), Washington, DC.

Initiated in October 1966 by the Department of Defense, Project One Hundred Thousand accepts men who would not have qualified for military service under previous standards, and upgrades them medically and educationally. Major aims are to broaden opportunities for enlistment, equalize military service obligations, assure foresighted military…

Demograhic characteristics of the common loon in the upper Great Lakes

Treesearch

David C. Evers; Joseph D. Kaplan; Peter S. Reaman

2000-01-01

Capture, marking and release of birds began at the end of the 19th century and has increased in application to better understand the natural history of birds. The method of leg banding (or "ringing" in Europe) is now widely accepted as the primary means for determining movements, longevity, and individual performance of birds. By...

SMS/GOES cell and battery data analysis report

NASA Technical Reports Server (NTRS)

Armantrout, J. D.

1977-01-01

The nickel-cadmium battery design developed for the Synchronous Meteorological Satellite (SMS) and Geostationary Operational Environmental Satellite (GOES) provided background and guidelines for future development, manufacture, and application of spacecraft batteries. SMS/GOES battery design, development, qualification testing, acceptance testing, and life testing/mission performance characteristics were evaluated for correlation with battery cell manufacturing process variables.

Analysis of switch and examine combining with post-examining selection in cognitive radio

NASA Astrophysics Data System (ADS)

Agarwal, Rupali; Srivastava, Neelam; Katiyar, Himanshu

2018-06-01

To perform spectrum sensing in fading environment is one of the most challenging tasks for a CR system. Diversity combining schemes are used to combat the effect of fading and hence detection probability of CR gets improved. Among many diversity combining techniques, switched diversity offers one of the lowest complexity solutions. The receiver embedded with switched diversity looks for an acceptable diversity path (having signal to noise ratio (SNR) above the required threshold) to receive the data. In conventional switch and examine combining (SEC) scheme, when no acceptable path is found after all the paths are examined, the receiver randomly chooses an unacceptable path. Switch and examine combining with post-examining selection (SECp) is a modified version of conventional SEC. In SECp, the conventional SEC scheme is altered in a way that it selects the best path when no acceptable path is found after all paths have been examined. In this paper, formula for probability of detection ( ?) is derived using SECp and SEC diversity combining technique over Rayleigh fading channel. Also the performance of SECp is compared with SEC and no diversity case. Performance comparison is done with the help of SNR vs. ? and complementary receiver operating characteristic curves.

Fate of Manuscripts Rejected From the Red Journal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holliday, Emma B., E-mail: emmaholliday@gmail.com; Yang, George; Jagsi, Reshma

Purpose: To evaluate characteristics associated with higher rates of acceptance for original manuscripts submitted for publication to the International Journal of Radiation Oncology • Biology • Physics (IJROBP) and describe the fate of rejected manuscripts. Methods and Materials: Manuscripts submitted to the IJROBP from May 1, 2010, to August 31, 2010, and May 1, 2012, to August 31, 2012, were evaluated for author demographics and acceptance status. A PubMed search was performed for each IJROBP-rejected manuscript to ascertain whether the manuscript was ultimately published elsewhere. The Impact Factor of the accepting journal and the number of citations of the publishedmore » manuscript were also collected. Results: Of the 500 included manuscripts, 172 (34.4%) were accepted and 328 (65.6%) were rejected. There was no significant difference in acceptance rates according to gender or degree of the submitting author, but there were significant differences seen based on the submitting author's country, rank, and h-index. On multivariate analysis, earlier year submitted (P<.0001) and higher author h-index (P=.006) remained significantly associated with acceptance into the IJROBP. Two hundred thirty-five IJROBP-rejected manuscripts (71.7%) were ultimately published in a PubMed-listed journal as of July 2014. There were no significant differences in any submitting author characteristics. Journals accepting IJROBP-rejected manuscripts had a lower median [interquartile range] 2013 impact factor compared with the IJROBP (2.45 [1.53-3.71] vs 4.176). The IJROBP-rejected manuscripts ultimately published elsewhere had a lower median [interquartile range] number of citations (1 [0-4] vs 6 [2-11]; P<.001), which persisted on multivariate analysis. Conclusions: The acceptance rate for manuscripts submitted to the IJROBP is approximately one-third, and approximately 70% of rejected manuscripts are ultimately published in other PubMed-listed journals, but these ultimate-destination journals usually have a lower impact factor, leading to fewer citations and overall visibility.« less

Visual/motion cue mismatch in a coordinated roll maneuver

NASA Technical Reports Server (NTRS)

Shirachi, D. K.; Shirley, R. S.

1981-01-01

The effects of bandwidth differences between visual and motion cueing systems on pilot performance for a coordinated roll task were investigated. Visual and motion cue configurations which were acceptable and the effects of reduced motion cue scaling on pilot performance were studied to determine the scale reduction threshold for which pilot performance was significantly different from full scale pilot performance. It is concluded that: (1) the presence or absence of high frequency error information in the visual and/or motion display systems significantly affects pilot performance; and (2) the attenuation of motion scaling while maintaining other display dynamic characteristics constant, affects pilot performance.

Acceptability of formulations and application methods for vaginal microbicides among drug-involved women: results of product trials in three cities.

PubMed

Hammett, T M; Mason, T H; Joanis, C L; Foster, S E; Harmon, P; Robles, R R; Finlinson, H A; Feudo, R; Vining-Bethea, S; Jeter, G; Mayer, K H; Doherty-Iddings, P; Seage, G R

2000-02-01

Female-controlled methods of HIV prevention, such as vaginal microbicides, are urgently needed, particularly among drug-involved women. Acceptability research is critical to product development. To assess the acceptability of forms and application methods for future microbicides. Eighty-four drug-involved women were introduced in groups to three lubricant products, asked to try each for 3 weeks, and scheduled for individual follow-up interviews. Participants and their partners felt positive about the products, and expressed willingness to use microbicides if they were shown to be effective against HIV. Women agreed on product characteristics that influenced their reactions (e.g. ease of insertion, degree of "messiness"), but often disagreed on whether their reactions to these characteristics were positive or negative. Development of acceptable and effective HIV-prevention products depends on understanding the interaction between characteristics of the products and the characteristics and perceptions of women. Levels of sexual risk and acceptability factors based on drug-use patterns, race and ethnicity, culture, age, and types and attitudes of male partners suggest that a "one size fits all" approach will not win broad acceptance among drug-involved women.

A Human Factors Evaluation of a Methodology for Pressurized Crew Module Acceptability for Zero-Gravity Ingress of Spacecraft

NASA Technical Reports Server (NTRS)

Sanchez, Merri J.

2000-01-01

This project aimed to develop a methodology for evaluating performance and acceptability characteristics of the pressurized crew module volume suitability for zero-gravity (g) ingress of a spacecraft and to evaluate the operational acceptability of the NASA crew return vehicle (CRV) for zero-g ingress of astronaut crew, volume for crew tasks, and general crew module and seat layout. No standard or methodology has been established for evaluating volume acceptability in human spaceflight vehicles. Volume affects astronauts'ability to ingress and egress the vehicle, and to maneuver in and perform critical operational tasks inside the vehicle. Much research has been conducted on aircraft ingress, egress, and rescue in order to establish military and civil aircraft standards. However, due to the extremely limited number of human-rated spacecraft, this topic has been un-addressed. The NASA CRV was used for this study. The prototype vehicle can return a 7-member crew from the International Space Station in an emergency. The vehicle's internal arrangement must be designed to facilitate rapid zero-g ingress, zero-g maneuverability, ease of one-g egress and rescue, and ease of operational tasks in multiple acceleration environments. A full-scale crew module mockup was built and outfitted with representative adjustable seats, crew equipment, and a volumetrically equivalent hatch. Human factors testing was conducted in three acceleration environments using ground-based facilities and the KC-135 aircraft. Performance and acceptability measurements were collected. Data analysis was conducted using analysis of variance and nonparametric techniques.

An Empirical Examination of Individual and System Characteristics on Enhancing E-Learning Acceptance

ERIC Educational Resources Information Center

Lee, Yi-Hsuan; Hsiao, Chan; Purnomo, Sutrisno Hadi

2014-01-01

Due to the continued prevalence of e-learning underutilization in Indonesia's higher education context, this study empirically examines individual and system characteristics believed to influence students' acceptance of e-learning systems. The proposed research model is developed to examine the influence of five characteristics of the Technology…

Differences between physicians in the likelihood of referral and acceptance of elderly patients for dialysis-influence of age and comorbidity.

PubMed

Visser, Annemieke; Dijkstra, Geke J; Huisman, Roel M; Gansevoort, Ron T; de Jong, Paul E; Reijneveld, Sijmen A

2007-11-01

Incidence of dialysis in elderly patients in the Netherlands is low compared to other countries. This study aims to assess the impact of patients' age and comorbidity on the likelihood of referral and acceptance of patients for dialysis and whether this is affected by physician characteristics. A vignette study was performed among 209 primary care physicians, 162 non-nephrology specialists and 20 nephrologists working in the north of the Netherlands. Physicians were offered six vignettes concerning case-reports of patients with end-stage renal disease (ESRD) and varying comorbidities or circumstances and asked about the likelihood of referral/acceptance of the patient in the given circumstances. The likelihood of referral within groups of physicians varied widely, especially within the group of primary care physicians and non-nephrology specialists, but was not affected by characteristics of physicians. The likelihood of referral or acceptance of patients for dialysis depended on the patient's age, and type and severity of comorbidity. In general, primary care physicians and non-nephrology specialists were less likely to refer than nephrologists were to accept. Differences within and between groups of physicians were larger for 80- than for 65-year-old patients, and for patients with less severe shortness of breath and cognitive impairments and more severe diabetes and social impairments. Hardly any differences were found for patients with cancer. Patients' age and comorbidities affect the likelihood of referral. Differences between groups of physicians suggest that there is insufficient agreement on the extent to which these factors should affect the referral/acceptance of patients for dialysis. These findings underline the need for more research into circumstances under which patients might benefit from dialysis. Guidelines should be developed to improve the referral of elderly and less healthy patients.

Commercial grade item (CGI) dedication of generators for nuclear safety related applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, R.K.; Hajos, L.G.

1993-03-01

The number of nuclear safety related equipment suppliers and the availability of spare and replacement parts designed specifically for nuclear safety related application are shrinking rapidly. These have made it necessary for utilities to apply commercial grade spare and replacement parts in nuclear safety related applications after implementing proper acceptance and dedication process to verify that such items conform with the requirements of their use in nuclear safety related application. The general guidelines for the commercial grade item (CGI) acceptance and dedication are provided in US Nuclear Regulatory Commission (NRC) Generic Letters and Electric Power Research Institute (EPRI) Report NP-5652,more » Guideline for the Utilization of Commercial Grade Items in Nuclear Safety Related Applications. This paper presents an application of these generic guidelines for procurement, acceptance, and dedication of a commercial grade generator for use as a standby generator at Salem Generating Station Units 1 and 2. The paper identifies the critical characteristics of the generator which once verified, will provide reasonable assurance that the generator will perform its intended safety function. The paper also delineates the method of verification of the critical characteristics through tests and provide acceptance criteria for the test results. The methodology presented in this paper may be used as specific guidelines for reliable and cost effective procurement and dedication of commercial grade generators for use as standby generators at nuclear power plants.« less

User Acceptance of Wrist-Worn Activity Trackers Among Community-Dwelling Older Adults: Mixed Method Study.

PubMed

Puri, Arjun; Kim, Ben; Nguyen, Olivier; Stolee, Paul; Tung, James; Lee, Joon

2017-11-15

Wearable activity trackers are newly emerging technologies with the anticipation for successfully supporting aging-in-place. Consumer-grade wearable activity trackers are increasingly ubiquitous in the market, but the attitudes toward, as well as acceptance and voluntary use of, these trackers in older population are poorly understood. The aim of this study was to assess acceptance and usage of wearable activity trackers in Canadian community-dwelling older adults, using the potentially influential factors as identified in literature and technology acceptance model. A mixed methods design was used. A total of 20 older adults aged 55 years and older were recruited from Southwestern Ontario. Participants used 2 different wearable activity trackers (Xiaomi Mi Band and Microsoft Band) separately for each segment in the crossover design study for 21 days (ie, 42 days total). A questionnaire was developed to capture acceptance and experience at the end of each segment, representing 2 different devices. Semistructured interviews were conducted with 4 participants, and a content analysis was performed. Participants ranged in age from 55 years to 84 years (mean age: 64 years). The Mi Band gained higher levels of acceptance (16/20, 80%) compared with the Microsoft Band (10/20, 50%). The equipment characteristics dimension scored significantly higher for the Mi Band (P<.05). The amount a participant was willing to pay for the device was highly associated with technology acceptance (P<.05). Multivariate logistic regression with 3 covariates resulted in an area under the curve of 0.79. Content analysis resulted in the formation of the following main themes: (1) smartphones as facilitators of wearable activity trackers; (2) privacy is less of a concern for wearable activity trackers, (3) value proposition: self-awareness and motivation; (4) subjective norm, social support, and sense of independence; and (5) equipment characteristics matter: display, battery, comfort, and aesthetics. Older adults were mostly accepting of wearable activity trackers, and they had a clear understanding of its value for their lives. Wearable activity trackers were uniquely considered more personal than other types of technologies, thereby the equipment characteristics including comfort, aesthetics, and price had a significant impact on the acceptance. Results indicated that privacy was less of concern for older adults, but it may have stemmed from a lack of understanding of the privacy risks and implications. These findings add to emerging research that investigates acceptance and factors that may influence acceptance of wearable activity trackers among older adults. ©Arjun Puri, Ben Kim, Olivier Nguyen, Paul Stolee, James Tung, Joon Lee. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 15.11.2017.

Method and system for simulating heat and mass transfer in cooling towers

DOEpatents

Bharathan, Desikan; Hassani, A. Vahab

1997-01-01

The present invention is a system and method for simulating the performance of a cooling tower. More precisely, the simulator of the present invention predicts values related to the heat and mass transfer from a liquid (e.g., water) to a gas (e.g., air) when provided with input data related to a cooling tower design. In particular, the simulator accepts input data regarding: (a) cooling tower site environmental characteristics; (b) cooling tower operational characteristics; and (c) geometric characteristics of the packing used to increase the surface area within the cooling tower upon which the heat and mass transfer interactions occur. In providing such performance predictions, the simulator performs computations related to the physics of heat and mass transfer within the packing. Thus, instead of relying solely on trial and error wherein various packing geometries are tested during construction of the cooling tower, the packing geometries for a proposed cooling tower can be simulated for use in selecting a desired packing geometry for the cooling tower.

Optical and thermal simulation for wide acceptance angle CPV module

NASA Astrophysics Data System (ADS)

Ahmad, Nawwar; Ota, Yasuyuki; Araki, Kenji; Lee, Kan-Hua; Yamaguchi, Masafumi; Nishioka, Kensuke

2017-09-01

Concentrator photovoltaic (CPV) technology has the potential to decrease the cost of systems in the near future by using less expensive optical elements in the system which replace the receiving surface aperture and concentrate the sunlight onto small solar cells. One of the main concerns of CPV is the need for high precision tracking system and the relation to the acceptance angle. In this paper, we proposed a CPV module with concentration ratio larger than 100 times and wide acceptance angle. An optical simulation for the module with S-TIM2 glass as a lens material was conducted to estimate the optical performance of the module. Thermal and electrical simulation was also conducted using COMSOL Multiphysics and SPICE respectively to evaluate the working temperature and electrical characteristics of the multijunction solar cell under concentration conditions.

Fixed-base simulator study of the effect of time delays in visual cues on pilot tracking performance

NASA Technical Reports Server (NTRS)

Queijo, M. J.; Riley, D. R.

1975-01-01

Factors were examined which determine the amount of time delay acceptable in the visual feedback loop in flight simulators. Acceptable time delays are defined as delays which significantly affect neither the results nor the manner in which the subject 'flies' the simulator. The subject tracked a target aircraft as it oscillated sinusoidally in a vertical plane only. The pursuing aircraft was permitted five degrees of freedom. Time delays of from 0.047 to 0.297 second were inserted in the visual feedback loop. A side task was employed to maintain the workload constant and to insure that the pilot was fully occupied during the experiment. Tracking results were obtained for 17 aircraft configurations having different longitudinal short-period characteristics. Results show a positive correlation between improved handling qualities and a longer acceptable time delay.

An Overview of the NASA Aerospace Flight Battery Systems Program

NASA Technical Reports Server (NTRS)

Manzo, Michelle

2003-01-01

Develop an understanding of the safety issues relating to space use and qualification of new Li-Ion technology for manned applications. Enable use of new technology batteries into GFE equipment - laptop computers, camcorders. Establish a data base for an optimized set of cells (and batteries) exhibiting acceptable performance and abuse characteristics for utilization as building blocks for numerous applications.

Experimental investigation on performance and exhaust emissions of castor oil biodiesel from a diesel engine.

PubMed

Shojaeefard, M H; Etgahni, M M; Meisami, F; Barari, A

2013-01-01

Biodiesel, produced from plant and animal oils, is an important alternative to fossil fuels because, apart from dwindling supply, the latter are a major source of air pollution. In this investigation, effects of castor oil biodiesel blends have been examined on diesel engine performance and emissions. After producing castor methyl ester by the transesterification method and measuring its characteristics, the experiments were performed on a four cylinder, turbocharged, direct injection, diesel engine. Engine performance (power, torque, brake specific fuel consumption and thermal efficiency) and exhaust emissions were analysed at various engine speeds. All the tests were done under 75% full load. Furthermore, the volumetric blending ratios of biodiesel with conventional diesel fuel were set at 5, 10, 15, 20 and 30%. The results indicate that lower blends of biodiesel provide acceptable engine performance and even improve it. Meanwhile, exhaust emissions are much decreased. Finally, a 15% blend of castor oil-biodiesel was picked as the optimized blend of biodiesel-diesel. It was found that lower blends of castor biodiesel are an acceptable fuel alternative for the engine.

Sensory Profile, Drivers of Liking, and Influence of Information on the Acceptance of Low-Calorie Synbiotic and Probiotic Chocolate Ice Cream.

PubMed

Peres, Juliana; Esmerino, Erick; da Silva, Alessandra Lins; Racowski, Ilana; Bolini, Helena

2018-05-01

The objective of this study was to evaluate the sensory profile and the influence of the information on the acceptance of the symbiotic chocolate ice cream made with sucrose and different sweeteners (aspartame, sucralose, neotame, Stevia with 60%, 85%, 95%, and 97% of rebaudioside A) through analysis of variance (ANOVA), Tukey's test, and partial least of square (PLS) regression. Quantitative descriptive analysis (QDA) was carried out by 18 assessors, who evaluated the samples in relation to the raised descriptors. Additionally, two acceptance tests (blind/informed) were performed with 120 consumers. The samples sweetened with sucralose and rebaudioside 97% presented similar profile to the control sample, thus having a better potential to replace sucrose in chocolate ice cream. The acceptance test carried out with information had higher scores for the attributes appearance, aroma, flavor, texture, and overall impression. The correlation between data from the acceptance tests and QDA showed that the descriptors "low-energy" and "natural sweetener" claims interfered negatively in the drivers of liking of chocolate ice cream. Therefore, we can conclude that some characteristics unnoticed by consumers were highlighted after providing the information about the product's characteristics. This research is important and contributes to the manufacture and development of low-calorie chocolate ice cream with functional properties, guiding, through suitable sensory and statistical tools, the application of stevia and other artificial sweeteners in products with reduction or total absence of sucrose and highlighting the impact of the labeling of these products on consumer perception. © 2018 Institute of Food Technologists®.

The 4 phase VSR motor: The ideal prime mover for electric vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holling, G.H.; Yeck, M.M.

1994-12-31

4 phase variable switched reluctance motors are gaining acceptance in many applications due to their fault tolerant characteristics. A 4 phase variable switched reluctance motor (VSR) is modelled and its performance is predicted for several operating points for an electric vehicle application. The 4 phase VSR offers fault tolerance, high performance, and an excellent torque to weight ratio. The actual system performance was measured both on a teststand and on an actual vehicle. While the system described is used in a production electric motorscooter, the technology is equally applicable for high efficiency electric cars and buses. 4 refs.

Electron Beam Welding of Duplex Steels with using Heat Treatment

NASA Astrophysics Data System (ADS)

Schwarz, Ladislav; Vrtochová, Tatiana; Ulrich, Koloman

2010-01-01

This contribution presents characteristics, metallurgy and weldability of duplex steels with using concentrated energy source. The first part of the article describes metallurgy of duplex steels and the influence of nitrogen on their solidification. The second part focuses on weldability of duplex steels with using electron beam aimed on acceptable structure and corrosion resistance performed by multiple runs of defocused beam over the penetration weld.

The Amazing Story of How "Women" Conquered It All: The Production of Gender Scripts in the Chilean Curricular Documents of History and Social Studies

ERIC Educational Resources Information Center

Errazuriz, Valentina

2016-01-01

This article explores the construction of the category "Woman" in the official history and social studies curricular documents distributed by the Chilean Ministry of Education to all public and charter schools in 2014. It answers two major questions: what are the characteristics and acceptable gender performances of the category…

Operational procedure for computer program for design point characteristics of a gas generator or a turbojet lift engine for V/STOL applications

NASA Technical Reports Server (NTRS)

Krebs, R. P.

1972-01-01

The computer program described calculates the design-point characteristics of a gas generator or a turbojet lift engine for V/STOL applications. The program computes the dimensions and mass, as well as the thermodynamic performance of the model engine and its components. The program was written in FORTRAN 4 language. Provision has been made so that the program accepts input values in either SI Units or U.S. Customary Units. Each engine design-point calculation requires less than 0.5 second of 7094 computer time.

Effectiveness and driver acceptance of a semi-autonomous forward obstacle collision avoidance system.

PubMed

Itoh, Makoto; Horikome, Tatsuya; Inagaki, Toshiyuki

2013-09-01

This paper proposes a semi-autonomous collision avoidance system for the prevention of collisions between vehicles and pedestrians and objects on a road. The system is designed to be compatible with the human-centered automation principle, i.e., the decision to perform a maneuver to avoid a collision is made by the driver. However, the system is partly autonomous in that it turns the steering wheel independently when the driver only applies the brake, indicating his or her intent to avoid the obstacle. With a medium-fidelity driving simulator, we conducted an experiment to investigate the effectiveness of this system for improving safety in emergency situations, as well as its acceptance by drivers. The results indicate that the system effectively improves safety in emergency situations, and the semi-autonomous characteristic of the system was found to be acceptable to drivers. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Chemical characterization of candy made of Erva-Mate (Ilex paraguariensis A. St. Hil.) residue.

PubMed

Vieira, Manoela A; Rovaris, Angela A; Maraschin, Marcelo; De Simas, Karina N; Pagliosa, Cristiane M; Podestá, Rossana; Amboni, Renata D M C; Barreto, Pedro L M; Amante, Edna R

2008-06-25

The aim of this work was to evaluate the chemical properties of the residues from erva-mate processing and also to determine the candy-making performance with addition of residues from erva-mate on consumers' acceptance and purchase intent of this new product. The candies containing different amounts of mate powder were evaluated through overall acceptability test and purchase intent. Mate powder showed high contents of dietary fiber, total ash, and total polyphenols. The total dietary fiber content of the mate candies ranged from 5.7 to 6.29% on a dry matter basis. Supplementation with mate powder caused significant increases in polyphenol and mineral contents of mate candies. The incorporation of mate powder increased the hardness of the candies and produced desirable results in their nutritional characteristics. The sensory tests indicated that mate candies were acceptable and approved in relation to purchase intent.

Linear and nonlinear schemes applied to pitch control of wind turbines.

PubMed

Geng, Hua; Yang, Geng

2014-01-01

Linear controllers have been employed in industrial applications for many years, but sometimes they are noneffective on the system with nonlinear characteristics. This paper discusses the structure, performance, implementation cost, advantages, and disadvantages of different linear and nonlinear schemes applied to the pitch control of the wind energy conversion systems (WECSs). The linear controller has the simplest structure and is easily understood by the engineers and thus is widely accepted by the industry. In contrast, nonlinear schemes are more complicated, but they can provide better performance. Although nonlinear algorithms can be implemented in a powerful digital processor nowadays, they need time to be accepted by the industry and their reliability needs to be verified in the commercial products. More information about the system nonlinear feature is helpful to simplify the controller design. However, nonlinear schemes independent of the system model are more robust to the uncertainties or deviations of the system parameters.

The bioethics of enhancing human performance for spaceflight

PubMed Central

Gibson, T M

2006-01-01

There are many ways of enhancing human performance. For military aviation in general, and for spaceflight in particular, the most important tools are selection, training, equipment, pharmacology, and surgery. In the future, genetic manipulation may be feasible. For each of these tools, the specific modalities available range from the ethically acceptable to the ethically unacceptable. Even when someone consents to a particular procedure to enhance performance, the action may be ethically unacceptable to society as a whole and the burden of risk for the individual may be too great. In addition, there are several characteristics that define the quality and the acceptability of the consent. Each method of enhancing performance will be examined in the context of the principles of medical ethics in a western society: autonomy, non‐maleficence, beneficence, and justice. The aim is to draw the attention of aeromedical practitioners to the complexities of ethical dilemmas such as this particular one in order to help them to develop a morally justifiable code of practice that balances society's needs against individual ambitions and corporate goals. PMID:16507654

Analysis of patients' willingness to be mobile, taking into account individual characteristics and two exemplary indications.

PubMed

Augustin, Jobst; Schäfer, Ines; Augustin, Matthias; Zander, Nicole

2017-04-01

With respect to health care planning, it is commonly assumed that patients consult the nearest physician. In reality, however, patients frequently accept great-er efforts/expenses than necessary to see a physician. The objective of the present study was to determine under which circumstances patients were willing to accept additional efforts/expenses, and which role sociodemographic and clinical characteristics play in this regard. Data collection was carried out in the context of a multicenter cross-sectional study among office-based and hospital-affiliated (University Medical Center Hamburg-Eppendorf) dermatologists. Patients (n = 309) with psoriasis and chronic wounds were surveyed about their mobility patterns and disease severity. Data analysis was performed using descriptive and multivariate methods. The willingness to accept additional efforts/expenses is primarily determined by a physician's expertise and service portfolio. Comparing both diagnoses showed that psoriasis patients usually traveled longer distances than wound patients. Among psoriasis patients, one significant predictor for accepting additional efforts/expenses was the level of education. With regard to wound patients, key factors included wound size (severity). The present study revealed complex mobility patterns among patients, which are affected by numerous personal as well as clinical factors. Depending on the diagnosis and individual preferences, additional efforts/expenses can - among other things - be explained by disease severity. Further studies are required to obtain more conclusive data. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

[Evaluation of consumer's acceptance of a peach palm snack (Bactris gasipaes) and determination of its potential as a functional food].

PubMed

López-Calvo, Rebeca; Pérez, Ana M; Ivankovich Guillén, Carmen; Calderón Villaplana, Sandra; Pineda Castro, Maria Lourdes

2015-03-01

The aim of this study was to evaluate consumers' acceptance of a peach palm snack and to determine its potential as a functional food by chemical characterization. An assessment was conducted with 100 consumers to determine the acceptance of different snack formulations and the results were subjected to cluster analysis. This analysis revealed two groups. Group 2 included people that consume snacks and peach palm frequently and showed the highest grades for the snack evaluated characteristics. All the consumers in group 2 and approximately 85% of the consumers in group 1 indicated that they would buy the product suggesting that there is a niche market for the developed peach palm snack. Also, a qualitative evaluation, using mini focus groups, of the two most widely accepted formulas of the snack (chosen according to previously described study) was performed. The sessions considered the opinion of middle class professionals and housewives. It was determined that the combination of tara gum and carboxymethylcellulose (CMC) allows a positive synergistic effect on the sensory characteristics of the snack, highlighting natural peach flavor and improving crunchiness. In a dry basis, the snack contains per 100 g: 9 ± 4 g of fat, 14.0 ± 0.3 g of dietary fiber, 15500 ± 32 µg of carotenoids and has an antioxidant capacity of 4700 ± 8 µmol TE, which demonstrates its potential as a functional food.

Using conjoint analysis to determine the impact of product and user characteristics on acceptability of rectal microbicides for HIV prevention among Peruvian men who have sex with men.

PubMed

Tang, Eric C; Galea, Jerome T; Kinsler, Janni J; Gonzales, Pedro; Sobieszczyk, Magdalena E; Sanchez, Jorge; Lama, Javier R

2016-05-01

Men who have sex with men (MSM) are in need of novel and acceptable HIV prevention interventions. In Peru, a Phase II clinical trial was recently completed evaluating rectally applied tenofovir gel among Peruvian MSM and transgender women. If deemed safe and acceptable, the product could move into efficacy testing, but acceptability data for similar products are needed now in order to prepare for future implementation. Peru is in need of expanded, national acceptability data among likely users. Using conjoint analysis of an online cross-sectional survey taken by 1008 Peruvian MSM and transgender women, we tested the acceptability of eight hypothetical rectal microbicide (RM) products comprising six, dual-value attributes. We also assessed the relationship of select product attributes with sample characteristics. Highest acceptability was found for a RM that was 90% effective, used before and after sex, without side effects, costing approximately $0.30, had no prescription requirement and had a single-use applicator. Product effectiveness and presence of side effects were the factors most likely to drive RM acceptance and use. Education, sexual orientation, sexual role and concern for HIV infection were also related to aspects of RM acceptability. RM acceptability was high, confirming the results of earlier, smaller studies and placing confidence in the acceptability of RMs. Analysis of the relationships with product attributes and sample characteristics underscore the need to consider the impact of factors such as sexual orientation, sexual role, level of education and concern for HIV acquisition on RM acceptability. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Sensory Profile and Consumer Acceptability of Prebiotic White Chocolate with Sucrose Substitutes and the Addition of Goji Berry (Lycium barbarum).

PubMed

Morais Ferreira, Janaína Madruga; Azevedo, Bruna Marcacini; Luccas, Valdecir; Bolini, Helena Maria André

2017-03-01

Functional food is a product containing nutrients that provide health benefits beyond basic nutrition. The objective of the present study was to evaluate the descriptive sensory profile and consumers' acceptance of functional (prebiotic) white chocolates with and without the addition of an antioxidant source (goji berry [GB]) and sucrose replacement. The descriptive sensory profile was determined by quantitative descriptive analysis (QDA) with trained assessors (n = 12), and the acceptance test was performed with 120 consumers. The correlation of descriptive and hedonic data was determined by partial least squares (PLS). The results of QDA indicated that GB reduces the perception of most aroma and flavor attributes, and enhances the bitter taste, bitter aftertaste, astringency, and most of the texture attributes. The consumers' acceptance of the chocolates was positive for all sensory characteristics, with acceptance scores above 6 on a 9-point scale. According to the PLS regression analysis, the descriptors cream color and cocoa butter flavor contributed positively to the acceptance of functional white chocolates. Therefore, prebiotic white chocolate with or without the addition of GB is innovative and can attract consumers, due to its functional properties, being a promising alternative for the food industry. © 2017 Institute of Food Technologists®.

Angular non-critical phase-matching second-harmonic-generation characteristics of RECOB (RE = Tm, Y, Gd, Sm, Nd and La) crystals.

PubMed

Liu, Yanqing; Wang, Zhengping; Yu, Fapeng; Qi, Hongwei; Yang, Xiuqin; Yu, Xiaoqiang; Zhao, Xian; Xu, Xinguang

2017-05-15

For the first time, the angular non-critical phase-matching (A-NCPM) second-harmonic-generation (SHG) characteristics of a family of monoclinic oxoborate crystals, RECa 4 O(BO 3 ) 3 (RECOB, RE = Tm, Y, Gd, Sm, Nd and La), were comprehensively investigated. For all of the realizable A-NCPM SHG styles, the feature parameters including PM wavelength, angular, wavelength and temperature acceptance bandwidths, have been derived from the theory and verified by the experiments. We discovered that the closer the ion radius between RE 3+ and Ca 2+ , the smaller the birefringence, and the better the A-NCPM SHG properties. As a result, for the Type-I SHG on Y-axis which has the largest effective nonlinear optical coefficient (d eff ) among the three realizable A-NCPM styles, NdCOB crystal presents the longest PM wavelength (927 nm), the largest angular acceptance bandwidth (Δθ⋅l 1/2 = 84.3 mrad·cm 1/2 , Δϕ⋅l 1/2 = 58.8 mrad·cm 1/2 ), and the broadest wavelength acceptance bandwidth (8.7 nm). This discovery will contribute to the design of new NCPM materials, at the same time the parameter formula will be helpful for the theoretical prediction of NCPM performance.

Pollution reduction technology program small jet aircraft engines, phase 3

NASA Technical Reports Server (NTRS)

Bruce, T. W.; Davis, F. G.; Kuhn, T. E.; Mongia, H. C.

1981-01-01

A series of Model TFE731-2 engine tests were conducted with the Concept 2 variable geometry airblast fuel injector combustion system installed. The engine was tested to: (1) establish the emission levels over the selected points which comprise the Environmental Protection Agency Landing-Takeoff Cycle; (2) determine engine performance with the combustion system; and (3) evaulate the engine acceleration/deceleration characteristics. The hydrocarbon (HC), carbon monoxide (CO), and smoke goals were met. Oxides of nitrogen (NOx) were above the goal for the same configuration that met the other pollutant goals. The engine and combustor performance, as well as acceleration/deceleration characteristics, were acceptable. The Concept 3 staged combustor system was refined from earlier phase development and subjected to further rig refinement testing. The concept met all of the emissions goals.

Experimental Aerodynamic Characteristics of a Joined-wing Research Aircraft Configuration

NASA Technical Reports Server (NTRS)

Smith, Stephen C.; Stonum, Ronald K.

1989-01-01

A wind-tunnel test was conducted at Ames Research Center to measure the aerodynamic characteristics of a joined-wing research aircraft (JWRA). This aircraft was designed to utilize the fuselage and engines of the existing NASA AD-1 aircraft. The JWRA was designed to have removable outer wing panels to represent three different configurations with the interwing joint at different fractions of the wing span. A one-sixth-scale wind-tunnel model of all three configurations of the JWRA was tested in the Ames 12-Foot Pressure Wind Tunnel to measure aerodynamic performance, stability, and control characteristics. The results of these tests are presented. Longitudinal and lateral-directional characteristics were measured over an angle of attack range of -7 to 14 deg and over an angle of sideslip range of -5 to +2.5 deg at a Mach number of 0.35 and a Reynolds number of 2.2x10(6)/ft. Various combinations of deflected control surfaces were tested to measure the effectiveness and impact on stability of several control surface arrangements. In addition, the effects on stall and post-stall aerodynamic characteristics from small leading-edge devices called vortilons were measured. The results of these tests indicate that the JWRA had very good aerodynamic performance and acceptable stability and control throughout its flight envelope. The vortilons produced a profound improvement in the stall and post-stall characteristics with no measurable effects on cruise performance.

Technology, Demographic Characteristics and E-Learning Acceptance: A Conceptual Model Based on Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Tarhini, Ali; Elyas, Tariq; Akour, Mohammad Ali; Al-Salti, Zahran

2016-01-01

The main aim of this paper is to develop an amalgamated conceptual model of technology acceptance that explains how individual, social, cultural and organizational factors affect the students' acceptance and usage behaviour of the Web-based learning systems. More specifically, the proposed model extends the Technology Acceptance Model (TAM) to…

A multi‐centre evaluation of nine rapid, point‐of‐care syphilis tests using archived sera

PubMed Central

Herring, A J; Ballard, R C; Pope, V; Adegbola, R A; Changalucha, J; Fitzgerald, D W; Hook, E W; Kubanova, A; Mananwatte, S; Pape, J W; Sturm, A W; West, B; Yin, Y P; Peeling, R W

2006-01-01

Objectives To evaluate nine rapid syphilis tests at eight geographically diverse laboratory sites for their performance and operational characteristics. Methods Tests were compared “head to head” using locally assembled panels of 100 archived (50 positive and 50 negative) sera at each site using as reference standards the Treponema pallidum haemagglutination or the T pallidum particle agglutination test. In addition inter‐site variation, result stability, test reproducibility and test operational characteristics were assessed. Results All nine tests gave good performance relative to the reference standard with sensitivities ranging from 84.5–97.7% and specificities from 84.5–98%. Result stability was variable if result reading was delayed past the recommended period. All the tests were found to be easy to use, especially the lateral flow tests. Conclusions All the tests evaluated have acceptable performance characteristics and could make an impact on the control of syphilis. Tests that can use whole blood and do not require refrigeration were selected for further evaluation in field settings. PMID:17118953

A Comparative Study of Factors Related to Student Performance in Online and Traditional Face-to-Face MBA Courses That Are Quantitative and Qualitative in Nature

ERIC Educational Resources Information Center

Davis, Carenado V.

2013-01-01

Online learning environments have been embraced by many institutions, faculty, and students as a viable adult learning option to the traditional face-to-face learning environment. As this mode of delivery for instruction continues to grow in acceptance, it is important to understand the characteristics of adult learners, the historical progression…

The use of high pressure processing to enhance the quality and shelf life of reduced sodium naturally cured restructured cooked hams.

PubMed

Pietrasik, Z; Gaudette, N J; Johnston, S P

2016-06-01

The combined effect of partial salt replacement with modified potassium chloride and high pressure processing (600 MPa for 3 min at 8°C) on the quality and shelf life of naturally-cured restructured hams was investigated over a 12 week storage period. Instrumental, microbiological and consumer acceptability testing was performed. A partial salt substitution with modified potassium chloride adversely affected textural and water binding characteristics of hams and led to a decrease in the consumer acceptance compared to regular salt hams. Celery powder used as a curing agent had beneficial effects on water holding and moisture retention and improved bind of restructured hams; however the consumer acceptability of flavor and aftertaste received significantly lower scores compared to nitrite. No significant differences in all consumer acceptability parameters resulted for hams subjected to HPP compared to non-HPP for all storage periods indicating that HPP can effectively extend shelf-life of restructured ham without compromising eating quality. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Province, Indonesia

PubMed

Endarti, Dwi; Satibi, Satibi; Kristina, Susi Ari; Farida, Muhaya Almira; Rahmawanti, Yuni; Andriani, Tika

2018-04-27

Objective: To determine knowledge, perception, and acceptance related to cervical cancer, HPV vaccination and screening for cervical cancer among Indonesian women, particularly in Yogyakarta province. Methods: A convenience sample of 392 women consists of 192 young women, 100 mothers of girls aged 12 – 15 years, and 100 adult women in Yogyakarta province, Indonesia was participated in this study. A self-administered paper-based questionnaire was used to determine demographics characteristics of respondents, as well as their knowledge – perception – acceptance related to cervical cancer, HPV vaccination, and screening for cervical cancer. Data collection were conducted during December 2013 to March 2014. Descriptive statistics was used to analyze description of demographics characteristics, knowledge, perception, and acceptance; while crosstab analysis using Chi-Square was used to analyze the relationship between demographics characteristics versus knowledge, perception, and acceptance. Results: This study found that knowledge and perception regarding cervical cancer, HPV vaccination, and screening for cervical cancer among women in Indonesia, particularly in Yogyakarta Province were still insufficient, however the acceptance was good. Among female young women, 64% had good knowledge, 62% had positive perception of cervical cancer and HPV vaccination, and 92% tended to accept HPV vaccination. Among mothers of girls aged 12 – 15 years, 44% had good knowledge, 46% had positive perception of cervical cancer and HPV vaccination, and 91% tended to accept HPV vaccination for their daughters. Among adult women, 68% had good knowledge, 57% had positive perception of cervical cancer and screening for cervical cancer, and 90% tended to accept cervical cancer screening. In general, demographics characteristics of having experience and exposure to information had significant relationship with knowledge, perception, and acceptance of HPV vaccination and screening for cervical cancer. Conclusions: Either knowledge or perception of cervical cancer and strategies toward it among Indonesian women particularly in Yogyakarta province were still unsatisfied. Efforts should be improved for supporting cervical cancer prevention and control in Indonesia through such as education on cervical cancer disease and strategies toward it. Creative Commons Attribution License

Evaluation of the Acceptance of Audience Response System by Corporations Using the Technology Acceptance Model

NASA Astrophysics Data System (ADS)

Chu, Hsing-Hui; Lu, Ta-Jung; Wann, Jong-Wen

The purpose of this research is to explore enterprises' acceptance of Audience Response System (ARS) using Technology Acceptance Model (TAM). The findings show that (1) IT characteristics and facilitating conditions could be external variables of TAM. (2) The degree of E-business has positive significant correlation with behavioral intention of employees. (3) TAM is a good model to predict and explain IT acceptance. (4) Demographic variables, industry and firm characteristics have no significant correlation with ARS acceptance. The results provide useful information to managers and ARS providers that (1) ARS providers should focus more on creating different usages to enhance interactivity and employees' using intention. (2) Managers should pay attention to build sound internal facilitating conditions for introducing IT. (3) According to the degree of E-business, managers should set up strategic stages of introducing IT. (4) Providers should increase product promotion and also leverage academic and government to promote ARS.

Gerontechnology acceptance by elderly Hong Kong Chinese: a senior technology acceptance model (STAM).

PubMed

Chen, Ke; Chan, Alan Hoi Shou

2014-01-01

The purpose of this study was to develop and test a senior technology acceptance model (STAM) aimed at understanding the acceptance of gerontechnology by older Hong Kong Chinese people. The proposed STAM extended previous technology acceptance models and theories by adding age-related health and ability characteristics of older people. The proposed STAM was empirically tested using a cross-sectional questionnaire survey with a sample of 1012 seniors aged 55 and over in Hong Kong. The result showed that STAM was strongly supported and could explain 68% of the variance in the use of gerontechnology. For older Hong Kong Chinese, individual attributes, which include age, gender, education, gerontechnology self-efficacy and anxiety, and health and ability characteristics, as well as facilitating conditions explicitly and directly affected technology acceptance. These were better predictors of gerontechnology usage behaviour (UB) than the conventionally used attitudinal factors (usefulness and ease of use).

Toward optimizing patient-specific IMRT QA techniques in the accurate detection of dosimetrically acceptable and unacceptable patient plans

PubMed Central

McKenzie, Elizabeth M.; Balter, Peter A.; Stingo, Francesco C.; Jones, Jimmy; Followill, David S.; Kry, Stephen F.

2014-01-01

Purpose: The authors investigated the performance of several patient-specific intensity-modulated radiation therapy (IMRT) quality assurance (QA) dosimeters in terms of their ability to correctly identify dosimetrically acceptable and unacceptable IMRT patient plans, as determined by an in-house-designed multiple ion chamber phantom used as the gold standard. A further goal was to examine optimal threshold criteria that were consistent and based on the same criteria among the various dosimeters. Methods: The authors used receiver operating characteristic (ROC) curves to determine the sensitivity and specificity of (1) a 2D diode array undergoing anterior irradiation with field-by-field evaluation, (2) a 2D diode array undergoing anterior irradiation with composite evaluation, (3) a 2D diode array using planned irradiation angles with composite evaluation, (4) a helical diode array, (5) radiographic film, and (6) an ion chamber. This was done with a variety of evaluation criteria for a set of 15 dosimetrically unacceptable and 9 acceptable clinical IMRT patient plans, where acceptability was defined on the basis of multiple ion chamber measurements using independent ion chambers and a phantom. The area under the curve (AUC) on the ROC curves was used to compare dosimeter performance across all thresholds. Optimal threshold values were obtained from the ROC curves while incorporating considerations for cost and prevalence of unacceptable plans. Results: Using common clinical acceptance thresholds, most devices performed very poorly in terms of identifying unacceptable plans. Grouping the detector performance based on AUC showed two significantly different groups. The ion chamber, radiographic film, helical diode array, and anterior-delivered composite 2D diode array were in the better-performing group, whereas the anterior-delivered field-by-field and planned gantry angle delivery using the 2D diode array performed less well. Additionally, based on the AUCs, there was no significant difference in the performance of any device between gamma criteria of 2%/2 mm, 3%/3 mm, and 5%/3 mm. Finally, optimal cutoffs (e.g., percent of pixels passing gamma) were determined for each device and while clinical practice commonly uses a threshold of 90% of pixels passing for most cases, these results showed variability in the optimal cutoff among devices. Conclusions: IMRT QA devices have differences in their ability to accurately detect dosimetrically acceptable and unacceptable plans. Field-by-field analysis with a MapCheck device and use of the MapCheck with a MapPhan phantom while delivering at planned rotational gantry angles resulted in a significantly poorer ability to accurately sort acceptable and unacceptable plans compared with the other techniques examined. Patient-specific IMRT QA techniques in general should be thoroughly evaluated for their ability to correctly differentiate acceptable and unacceptable plans. Additionally, optimal agreement thresholds should be identified and used as common clinical thresholds typically worked very poorly to identify unacceptable plans. PMID:25471949

Toward optimizing patient-specific IMRT QA techniques in the accurate detection of dosimetrically acceptable and unacceptable patient plans.

PubMed

McKenzie, Elizabeth M; Balter, Peter A; Stingo, Francesco C; Jones, Jimmy; Followill, David S; Kry, Stephen F

2014-12-01

The authors investigated the performance of several patient-specific intensity-modulated radiation therapy (IMRT) quality assurance (QA) dosimeters in terms of their ability to correctly identify dosimetrically acceptable and unacceptable IMRT patient plans, as determined by an in-house-designed multiple ion chamber phantom used as the gold standard. A further goal was to examine optimal threshold criteria that were consistent and based on the same criteria among the various dosimeters. The authors used receiver operating characteristic (ROC) curves to determine the sensitivity and specificity of (1) a 2D diode array undergoing anterior irradiation with field-by-field evaluation, (2) a 2D diode array undergoing anterior irradiation with composite evaluation, (3) a 2D diode array using planned irradiation angles with composite evaluation, (4) a helical diode array, (5) radiographic film, and (6) an ion chamber. This was done with a variety of evaluation criteria for a set of 15 dosimetrically unacceptable and 9 acceptable clinical IMRT patient plans, where acceptability was defined on the basis of multiple ion chamber measurements using independent ion chambers and a phantom. The area under the curve (AUC) on the ROC curves was used to compare dosimeter performance across all thresholds. Optimal threshold values were obtained from the ROC curves while incorporating considerations for cost and prevalence of unacceptable plans. Using common clinical acceptance thresholds, most devices performed very poorly in terms of identifying unacceptable plans. Grouping the detector performance based on AUC showed two significantly different groups. The ion chamber, radiographic film, helical diode array, and anterior-delivered composite 2D diode array were in the better-performing group, whereas the anterior-delivered field-by-field and planned gantry angle delivery using the 2D diode array performed less well. Additionally, based on the AUCs, there was no significant difference in the performance of any device between gamma criteria of 2%/2 mm, 3%/3 mm, and 5%/3 mm. Finally, optimal cutoffs (e.g., percent of pixels passing gamma) were determined for each device and while clinical practice commonly uses a threshold of 90% of pixels passing for most cases, these results showed variability in the optimal cutoff among devices. IMRT QA devices have differences in their ability to accurately detect dosimetrically acceptable and unacceptable plans. Field-by-field analysis with a MapCheck device and use of the MapCheck with a MapPhan phantom while delivering at planned rotational gantry angles resulted in a significantly poorer ability to accurately sort acceptable and unacceptable plans compared with the other techniques examined. Patient-specific IMRT QA techniques in general should be thoroughly evaluated for their ability to correctly differentiate acceptable and unacceptable plans. Additionally, optimal agreement thresholds should be identified and used as common clinical thresholds typically worked very poorly to identify unacceptable plans.

Food Deserts in Leon County, FL: Disparate Distribution of Supplemental Nutrition Assistance Program-Accepting Stores by Neighborhood Characteristics

ERIC Educational Resources Information Center

Rigby, Samantha; Leone, Angela F.; Kim, Hwahwan; Betterley, Connie; Johnson, Mary Ann; Kurtz, Hilda; Lee, Jung Sun

2012-01-01

Objective: Examine whether neighborhood characteristics of racial composition, income, and rurality were related to distribution of Supplemental Nutrition Assistance Program (SNAP)-accepting stores in Leon County, Florida. Design: Cross-sectional; neighborhood and food store data collected in 2008. Setting and Participants: Forty-eight census…

Stress exposure and generation: A conjoint longitudinal model of body dysmorphic symptoms, peer acceptance, popularity, and victimization.

PubMed

Webb, Haley J; Zimmer-Gembeck, Melanie J; Mastro, Shawna

2016-09-01

This study examined the bidirectional (conjoint) longitudinal pathways linking adolescents' body dysmorphic disorder (BDD) symptoms with self- and peer-reported social functioning. Participants were 367 Australian students (45.5% boys, mean age=12.01 years) who participated in two waves of a longitudinal study with a 12-month lag between assessments. Participants self-reported their symptoms characteristic of BDD, and perception of peer acceptance. Classmates reported who was popular and victimized in their grade, and rated their liking (acceptance) of their classmates. In support of both stress exposure and stress generation models, T1 victimization was significantly associated with more symptoms characteristic of BDD at T2 relative to T1, and higher symptom level at T1 was associated with lower perceptions of peer acceptance at T2 relative to T1. These results support the hypothesized bidirectional model, whereby adverse social experiences negatively impact symptoms characteristic of BDD over time, and symptoms also exacerbate low perceptions of peer-acceptance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Acceptance of Tinnitus As an Independent Correlate of Tinnitus Severity.

PubMed

Hesser, Hugo; Bånkestad, Ellinor; Andersson, Gerhard

2015-01-01

Tinnitus is the experience of sounds without an identified external source, and for some the experience is associated with significant severity (i.e., perceived negative affect, activity limitation, and participation restriction due to tinnitus). Acceptance of tinnitus has recently been proposed to play an important role in explaining heterogeneity in tinnitus severity. The purpose of the present study was to extend previous investigations of acceptance in relation to tinnitus by examining the unique contribution of acceptance in accounting for tinnitus severity, beyond anxiety and depression symptoms. In a cross-sectional study, 362 participants with tinnitus attending an ENT clinic in Sweden completed a standard set of psychometrically examined measures of acceptance of tinnitus, tinnitus severity, and anxiety and depression symptoms. Participants also completed a background form on which they provided information about the experience of tinnitus (loudness, localization, sound characteristics), other auditory-related problems (hearing problems and sound sensitivity), and personal characteristics. Correlational analyses showed that acceptance was strongly and inversely related to tinnitus severity and anxiety and depression symptoms. Multivariate regression analysis, in which relevant patient characteristics were controlled, revealed that acceptance accounted for unique variance beyond anxiety and depression symptoms. Acceptance accounted for more of the variance than anxiety and depression symptoms combined. In addition, mediation analysis revealed that acceptance of tinnitus mediated the direct association between self-rated loudness and tinnitus severity, even after anxiety and depression symptoms were taken into account. Findings add to the growing body of work, supporting the unique and important role of acceptance in tinnitus severity. The utility of the concept is discussed in relation to the development of new psychological models and interventions for tinnitus severity.

A chromogranin A ELISA absent of an apparent high-dose hook effect observed in other chromogranin A ELISAs.

PubMed

Erickson, J Alan; Grenache, David G

2016-01-15

Routine testing for chromogranin A (CgA) using an established commercial ELISA revealed an apparent high-dose hook effect in approximately 15% of specimens. Investigations found the same effect in two additional ELISAs. We hypothesized that a CgA derived peptide(s) at high concentrations was responsible but experiments were inconclusive. Here we describe the analytical performance characteristics of the Chromoa™ CgA ELISA that did not display the apparent high-dose hook effect. Performance characteristics of the Chromoa ELISA were assessed. The reference interval was established utilizing healthy volunteers. Specimens producing the apparent high-dose hook effect in other assays were evaluated using the Chromoa ELISA. The limit of detection was 8ng/ml. Linearity was acceptable (slope=1.04, intercept=18.1 and r(2)=0.997). CVs were ≤4.6 and ≤9.3% for repeatability and within-laboratory imprecision, respectively. CgA was stable at ambient and refrigerated temperatures for a minimum of two and 14days, respectively. An upper reference interval limit of 95ng/ml was established. Specimens demonstrating the apparent high-dose hook effect in other ELISAs did not exhibit the phenomenon using the Chromoa ELISA. The Chromoa ELISA demonstrates acceptable performance for quantifying serum CgA. The apparent high-dose hook effect exhibited in other ELISAs was absent using the Chromoa assay. Copyright © 2015 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bouchier, F.; Ahrens, J.S.; Wells, G.

One thing that all access control applications have in common is the need to identify those individuals authorized to gain access to an area. Traditionally, the identification is based on something that person possesses, such as a key or badge, or something they know, such as a PIN or password. Biometric identifiers make their decisions based on the physiological or behavioral characteristics of individuals. The potential of biometrics devices to positively identify individuals has made them attractive for use in access control and computer security applications. However, no systems perform perfectly, so it is important to understand what a biometricmore » device`s performance is under real world conditions before deciding to implement one in an access control system. This paper will describe the evaluation of a prototype biometric identifier provided by IriScan Incorporated. This identifier was developed to recognize individual human beings based on the distinctive visual characteristics of the irises of their eyes. The main goal of the evaluation was to determine whether the system has potential as an access control device within the Department of Energy (DOE). The primary interest was an estimate of the accuracy of the system in terms of false accept and false reject rates. Data was also collected to estimate throughput time and user acceptability. The performance of the system during the test will be discussed. Lessons learned during the test which may aid in further testing and simplify implementation of a production system will also be discussed.« less

Characteristics of a global classification system for perinatal deaths: a Delphi consensus study.

PubMed

Wojcieszek, Aleena M; Reinebrant, Hanna E; Leisher, Susannah Hopkins; Allanson, Emma; Coory, Michael; Erwich, Jan Jaap; Frøen, J Frederik; Gardosi, Jason; Gordijn, Sanne; Gulmezoglu, Metin; Heazell, Alexander E P; Korteweg, Fleurisca J; McClure, Elizabeth; Pattinson, Robert; Silver, Robert M; Smith, Gordon; Teoh, Zheyi; Tunçalp, Özge; Flenady, Vicki

2016-08-15

Despite the global burden of perinatal deaths, there is currently no single, globally-acceptable classification system for perinatal deaths. Instead, multiple, disparate systems are in use world-wide. This inconsistency hinders accurate estimates of causes of death and impedes effective prevention strategies. The World Health Organisation (WHO) is developing a globally-acceptable classification approach for perinatal deaths. To inform this work, we sought to establish a consensus on the important characteristics of such a system. A group of international experts in the classification of perinatal deaths were identified and invited to join an expert panel to develop a list of important characteristics of a quality global classification system for perinatal death. A Delphi consensus methodology was used to reach agreement. Three rounds of consultation were undertaken using a purpose built on-line survey. Round one sought suggested characteristics for subsequent scoring and selection in rounds two and three. The panel of experts agreed on a total of 17 important characteristics for a globally-acceptable perinatal death classification system. Of these, 10 relate to the structural design of the system and 7 relate to the functional aspects and use of the system. This study serves as formative work towards the development of a globally-acceptable approach for the classification of the causes of perinatal deaths. The list of functional and structural characteristics identified should be taken into consideration when designing and developing such a system.

A consideration of the operation of automatic production machines.

PubMed

Hoshi, Toshiro; Sugimoto, Noboru

2015-01-01

At worksites, various automatic production machines are in use to release workers from muscular labor or labor in the detrimental environment. On the other hand, a large number of industrial accidents have been caused by automatic production machines. In view of this, this paper considers the operation of automatic production machines from the viewpoint of accident prevention, and points out two types of machine operation - operation for which quick performance is required (operation that is not permitted to be delayed) - and operation for which composed performance is required (operation that is not permitted to be performed in haste). These operations are distinguished by operation buttons of suitable colors and shapes. This paper shows that these characteristics are evaluated as "asymmetric on the time-axis". Here, in order for workers to accept the risk of automatic production machines, it is preconditioned in general that harm should be sufficiently small or avoidance of harm is easy. In this connection, this paper shows the possibility of facilitating the acceptance of the risk of automatic production machines by enhancing the asymmetric on the time-axis.

A consideration of the operation of automatic production machines

PubMed Central

HOSHI, Toshiro; SUGIMOTO, Noboru

2015-01-01

At worksites, various automatic production machines are in use to release workers from muscular labor or labor in the detrimental environment. On the other hand, a large number of industrial accidents have been caused by automatic production machines. In view of this, this paper considers the operation of automatic production machines from the viewpoint of accident prevention, and points out two types of machine operation − operation for which quick performance is required (operation that is not permitted to be delayed) − and operation for which composed performance is required (operation that is not permitted to be performed in haste). These operations are distinguished by operation buttons of suitable colors and shapes. This paper shows that these characteristics are evaluated as “asymmetric on the time-axis”. Here, in order for workers to accept the risk of automatic production machines, it is preconditioned in general that harm should be sufficiently small or avoidance of harm is easy. In this connection, this paper shows the possibility of facilitating the acceptance of the risk of automatic production machines by enhancing the asymmetric on the time-axis. PMID:25739898

Validation of computational code UST3D by the example of experimental aerodynamic data

NASA Astrophysics Data System (ADS)

Surzhikov, S. T.

2017-02-01

Numerical simulation of the aerodynamic characteristics of the hypersonic vehicles X-33 and X-34 as well as spherically blunted cone is performed using the unstructured meshes. It is demonstrated that the numerical predictions obtained with the computational code UST3D are in acceptable agreement with the experimental data for approximate parameters of the geometry of the hypersonic vehicles and in excellent agreement with data for blunted cone.

Acceptability of quality reporting and pay for performance among primary health centers in Lebanon.

PubMed

Saleh, Shadi S; Alameddine, Mohamad S; Natafgi, Nabil M

2013-01-01

Primary health care (PHC) is emphasized as the cornerstone of any health care system. Enhancing PHC performance is considered a strategy to enhance effective and equitable access to care. This study assesses the acceptability of and factors associated with quality reporting among PHC centers (PHCCs) in Lebanon. The managers of 132 Lebanese Ministry of Health PHCCs were surveyed using a cross-sectional design. Managers' willingness to report quality, participate in comparative quality assessments, and endorse pay-for-performance schemes was evaluated. Collected data were matched to the infrastructural characteristics and services database. Seventy-six percent of managers responded to the questionnaire, 93 percent of whom were willing to report clinical performance. Most expressed strong support for peer-performance comparison and pay-for-performance schemes. Willingness to report was negatively associated with the religious affiliation of centers and presence of health care facilities in the catchment area and favorably associated with use of information systems and the size of population served. The great willingness of PHCC managers to employ quality-enhancing initiatives flags a policy priority for PHC stakeholders to strengthen PHCC infrastructure and to enable reporting in an easy, standardized, and systematic way. Enhancing equity necessitates education and empowerment of managers in remote areas and those managing religiously affiliated centers.

Sheath effects on current collection by particle detectors with narrow acceptance angles

NASA Technical Reports Server (NTRS)

Singh, N.; Baugher, C. R.

1981-01-01

Restriction of the aperture acceptance angle of an ion or electron trap on an attracting spacecraft significantly alters the volt-ampere characteristics of the instrument in a low Mach number plasma. It is shown when the angular acceptance of the aperture is restricted the current to the collector tends to be independent of the Debye length. Expressions for the RPA characteristics for both a thin sheath and a thick sheath are derived; and it is shown that as the aperture is narrowed the curves tend toward equivalence.

Acceptance of Nordic snack bars in children aged 8-11 years.

PubMed

Holmer, Anna; Hausner, Helene; Reinbach, Helene C; Bredie, Wender L P; Wendin, Karin

2012-01-01

A health promoting diet is suggested to be tailored to regional circumstances to preserve the cultural diversity in eating habits, as well as contribute to more environmentally friendly eating. It may influence consumer acceptance, however, if the components of the diet differs considerably from their habitual food. This study aimed to investigate whether snack bars composed of Nordic ingredients were accepted by 8-11 year-old Danish (n=134) and Swedish (n=109) children. A seven-point hedonic scale was used to measure the children's acceptance of five snack bars that varied in their composition of whole grains, berries and nuts. A preference rank ordering of the five bars was also performed. The results showed that samples that were rated highest in liking and were most preferred in both countries were a kamut/pumpkin bar and an oat/cranberry bar. The sample with the lowest rating that was also least preferred was a pumpernickel/sea buckthorn bar. Flavour was the most important determinant of overall liking followed by texture, odour and appearance. Children's acceptances and preferences were highly influenced by the sensory characteristics of the bars, mainly flavour. In agreement with earlier studies, the novel food ingredients seemed to influence children's preferences. The Nordic snack bars may have a potential to be a snack option for Danish and Swedish school children, but repeated exposures to the products are recommended to increase children's acceptance.

Contamination avoidance devices for poppettype shutoff valves

NASA Technical Reports Server (NTRS)

Endicott, D. L.

1973-01-01

The determination of the cycle life is reported of the scal closure of a typical poppet-type shutoff valve in an uncontaminated GH2 environment and then compared this component performance with simulated operation with GN2 and LN2 containing controlled amounts of AL2O3 contaminant particles. The original valve design was tested for contamination damage tolerance characteristics under full-flow and cyclic-operating conditions, redesigned to improve the damage tolerance to contaminants, and then retested. The redesigned valve was found to have acceptable tolerance characteristics under all full-flow conditions and cyclic operation with small (25-75 microns) particulate contamination. The tolerance characteristics of the valve under cyclic conditions with large (75-250 microns) particulate contamination was improved but was not found to be completely satisfactory.

Operational procedure for computer program for design point characteristics of a compressed-air generator with through-flow combustor for V/STOL applications

NASA Technical Reports Server (NTRS)

Krebs, R. P.

1971-01-01

The computer program described in this report calculates the design-point characteristics of a compressed-air generator for use in V/STOL applications such as systems with a tip-turbine-driven lift fan. The program computes the dimensions and mass, as well as the thermodynamic performance of a model air generator configuration which involves a straight through-flow combustor. Physical and thermodynamic characteristics of the air generator components are also given. The program was written in FORTRAN IV language. Provision has been made so that the program will accept input values in either SI units or U.S. customary units. Each air generator design-point calculation requires about 1.5 seconds of 7094 computer time for execution.

Deans in German Universities: Goal Acceptance and Task Characteristics

ERIC Educational Resources Information Center

Scholkmann, Antonia

2011-01-01

This paper presents an empirical study which explored how deans at German universities accept their new role as manager, and which factors influence the acceptance of this role. Within a framework referring to Locke and Latham's goal setting theory, the acceptance of operative goals implemented in the faculties served as an indicator of how well…

Space thermal control development

NASA Technical Reports Server (NTRS)

Hoover, M. J.; Grodzka, P. G.; Oneill, M. J.

1971-01-01

The results of experimental investigations on a number of various phase change materials (PCMs) and PCMs in combination with metals and other materials are reported. The evaluations include the following PCM system performance characteristics: PCM and PCM/filler thermal diffusivities, the effects of long-term thermal cycling, PCM-container compatibility, and catalyst effectiveness and stability. Three PCMs demonstrated performance acceptable enough to be considered for use in prototype aluminum thermal control devices. These three PCMs are lithium nitrate trihydrate with zinc hydroxy nitrate catalyst, acetamide, and myristic acid. Of the fillers tested, aluminum honeycomb filler was found to offer the most increase in system thermal diffusivity.

Hyper Suprime-Cam: characteristics of 116 fully depleted back-illuminated CCDs

NASA Astrophysics Data System (ADS)

Kamata, Yukiko; Miyazaki, Satoshi; Nakaya, Hidehiko; Komiyama, Yutaka; Obuchi, Yoshiyuki; Kawanomoto, Satoshi; Uraguchi, Fumihiro; Utsumi, Yosuke; Suzuki, Hisanori; Miyazaki, Yasuhito; Muramatsu, Masaharu

2012-07-01

Hyper Suprime-Cam (HSC)1,2 is a wide field imaging camera with the field of view (FOV) 1.5 degree diameter, which is to be installed at the prime focus of the Subaru Telescope. The large FOV is realized by the 116 2K × 4K pixels fully depleted back-illuminated CCD (FDCCD) with 15 μm pixel square. The acceptance inspection of the CCDs started around the end of 2009 and finished June 2011. We measured basic characteristics such as charge transfer efficiency (CTE), dark current, readout noise, linearity and the number of the dead column for all CCDs, and measured the quantum effciency (QE) of 21 CCDs. As a result, we confirmed exceptional quality and performance fdor all CCDs ans were able to select the best pissible 116 CCDs. We also measured the flatness of each CCD at room temperature, and optimally placed them on the focal plane plate. In this paper, we report the results of the acceptance inspection asn the installation process into the HSC dewar3,4.

Automated Text Analysis Based on Skip-Gram Model for Food Evaluation in Predicting Consumer Acceptance

PubMed Central

Kim, Augustine Yongwhi; Choi, Hoduk

2018-01-01

The purpose of this paper is to evaluate food taste, smell, and characteristics from consumers' online reviews. Several studies in food sensory evaluation have been presented for consumer acceptance. However, these studies need taste descriptive word lexicon, and they are not suitable for analyzing large number of evaluators to predict consumer acceptance. In this paper, an automated text analysis method for food evaluation is presented to analyze and compare recently introduced two jjampong ramen types (mixed seafood noodles). To avoid building a sensory word lexicon, consumers' reviews are collected from SNS. Then, by training word embedding model with acquired reviews, words in the large amount of review text are converted into vectors. Based on these words represented as vectors, inference is performed to evaluate taste and smell of two jjampong ramen types. Finally, the reliability and merits of the proposed food evaluation method are confirmed by a comparison with the results from an actual consumer preference taste evaluation. PMID:29606960

Automated Text Analysis Based on Skip-Gram Model for Food Evaluation in Predicting Consumer Acceptance.

PubMed

Kim, Augustine Yongwhi; Ha, Jin Gwan; Choi, Hoduk; Moon, Hyeonjoon

2018-01-01

The purpose of this paper is to evaluate food taste, smell, and characteristics from consumers' online reviews. Several studies in food sensory evaluation have been presented for consumer acceptance. However, these studies need taste descriptive word lexicon, and they are not suitable for analyzing large number of evaluators to predict consumer acceptance. In this paper, an automated text analysis method for food evaluation is presented to analyze and compare recently introduced two jjampong ramen types (mixed seafood noodles). To avoid building a sensory word lexicon, consumers' reviews are collected from SNS. Then, by training word embedding model with acquired reviews, words in the large amount of review text are converted into vectors. Based on these words represented as vectors, inference is performed to evaluate taste and smell of two jjampong ramen types. Finally, the reliability and merits of the proposed food evaluation method are confirmed by a comparison with the results from an actual consumer preference taste evaluation.

Study of the electronic structure of electron accepting cyano-films: TCNQversusTCNE.

PubMed

Capitán, Maria J; Álvarez, Jesús; Navio, Cristina

2018-04-18

In this article, we perform systematic research on the electronic structure of two closely related organic electron acceptor molecules (TCNQ and TCNE), which are of technological interest due to their outstanding electronic properties. These studies have been performed from the experimental point of view by the use electron spectroscopies (XPS and UPS) and supported theoretically by the use of ab-initio DFT calculations. The cross-check between both molecules allows us to identify the characteristic electronic features of each part of the molecules and their contribution to the final electronic structure. We can describe the nature of the band gap of these materials, and we relate this with the appearance of the shake-up features in the core level spectra. A band bending and energy gap reduction of the aforementioned electronic structure in contact with a metal surface are seen in the experimental results as well in the theoretical calculations. This behavior implies that the TCNQ thin film accepts electrons from the metal substrate becoming a Schottky n-junction.

Simultaneous analysis of consumer variables, acceptability and sensory characteristics of dry-cured ham.

PubMed

Sugimoto, Masahiro; Obiya, Shinichi; Kaneko, Miku; Enomoto, Ayame; Honma, Mayu; Wakayama, Masataka; Tomita, Masaru

2016-11-01

We conducted a consumer acceptability analysis of dry-cured ham based on sensory evaluation. Consumer acceptability data are rendered heterogeneous by the diverse backgrounds and assessment abilities of the participants, requiring versatile analytical methods for their interpretation. Totally, 9 sensory attributes of 12 kinds of dry-cured ham samples collected from Japan (n=9), Italy (n=1), Spain (n=1), and Germany (n=1) were tasted by 117 Japanese consumers who showed acceptable evaluation abilities during blind sampling. Common techniques, such as hierarchical clustering, principal component analysis, and external preference mapping, were simultaneously utilized to analyze each characteristics scored in modified hedonic scale. These analyses revealed the relationships between the features and preferences of the assessors. For example, consumers aged 20-30 with smoking and drinking habits preferred sweetness and saltiness, and gave high ratings to Spanish Jómon serrano and Italian prosciutto. Our approach could assist ham marketers to identify potential purchasers and the preferred characteristics of their products. Copyright © 2016 Elsevier Ltd. All rights reserved.

Being Mindful about the Assessment of Culture: A Cultural Analysis of Culturally Adapted Acceptance-Based Behavior Therapy Approaches

ERIC Educational Resources Information Center

La Roche, Martin; Lustig, Kara

2013-01-01

In this article we review a wide range of cultural adaptations of acceptance-based behavior therapies (ABBT) from a cultural perspective. Consistent with the cultural match model, we argue that psychotherapeutic cultural adaptations are more effective as the cultural characteristics of patients are matched to the cultural characteristics of the…

Technology as a Double-Edged Sword: From Behavior Prediction with UTAUT to Students' Outcomes Considering Personal Characteristics

ERIC Educational Resources Information Center

Khechine, Hager; Lakhal, Sawsen

2018-01-01

Aim/Purpose: We aim to bring a better understanding of technology use in the educational context. More specifically, we investigate the determinants of webinar acceptance by university students and the effects of this acceptance on students' outcomes in the presence of personal characteristics such as anxiety, attitude, computer self-efficacy, and…

College Student Invulnerability Beliefs and HIV Vaccine Acceptability

ERIC Educational Resources Information Center

Ravert, Russell D.; Zimet, Gregory D.

2009-01-01

Objective: To examine behavioral history, beliefs, and vaccine characteristics as predictors of HIV vaccine acceptability. Methods: Two hundred forty-five US under graduates were surveyed regarding their sexual history, risk beliefs, and likelihood of accepting hypothetical HIV vaccines. Results: Multivariate regression analysis indicated that…

Sociocultural and Victimization Factors That Impact Attitudes Toward Intimate Partner Violence Among Kenyan Women.

PubMed

Mugoya, George C T; Witte, Tricia H; Ernst, Kacey C

2015-10-01

This study investigates the association between acceptance of intimate partner violence (IPV) and reported IPV victimization among Kenyan women, taking into consideration select sociocultural factors that may also influence acceptance of IPV. Data from a nationally representative, cross-sectional, household survey conducted between November 2008 and February 2009 in Kenya were analyzed. Hierarchical multiple regression was conducted to estimate the effect of select sociodemographic characteristics and reported IPV victimization on acceptance of IPV. The results showed that while both sociodemographic characteristics and reported IPV victimization were significantly associated with IPV acceptance, sociocultural factors had a greater impact. Programs aimed at empowering women and culturally competent IPV prevention strategies may be the key elements to reducing IPV. © The Author(s) 2014.

A systematic review and meta-analysis of studies evaluating the performance and operational characteristics of dual point-of-care tests for HIV and syphilis.

PubMed

Gliddon, Harriet D; Peeling, Rosanna W; Kamb, Mary L; Toskin, Igor; Wi, Teodora E; Taylor, Melanie M

2017-12-01

Mother-to-child transmission (MTCT) of syphilis and HIV continue to be important yet preventable causes of perinatal and infant morbidity and mortality. To systematically review, critically appraise and perform a meta-analysis to evaluate the operational characteristics of dual rapid diagnostic tests (RDTs) for HIV/syphilis and evaluate whether they are cost effective, acceptable and easy to use. Systematic review and meta-analysis. We searched seven electronic bibliographic databases from 2012 to December 2016 with no language restrictions. Search keywords included HIV, syphilis and diagnosis. We included studies that evaluated the operational characteristics of dual HIV/syphilis RDTs. Outcomes included diagnostic test accuracy, cost effectiveness, ease of use and interpretation and acceptability. All studies were assessed against quality criteria and assessed for risk of bias. Of 1914 identified papers, 18 were included for the meta-analysis of diagnostic accuracy for HIV and syphilis. All diagnostic accuracy evaluation studies showed a very high sensitivity and specificity for HIV and a lower, yet adequate, sensitivity and specificity for syphilis, with some variation among types of test. Dual screening for HIV and syphilis was more cost effective than single rapid tests for HIV and syphilis and prevented more adverse pregnancy outcomes. Qualitative data suggested dual RDTs were highly acceptable to clients, who cited time to result, cost and the requirement of a single finger prick as important characteristics of dual RDTs. The results of this systematic review and meta-analysis can be used by policy-makers and national programme managers who are considering implementing dual RDTs for HIV and syphilis. PROSPERO 2016:CRD42016049168. © World Health Organization 2017. Licensee BMJ Publishing Group Limited. This is an open access article distributed under the terms of the Creative Commons Attribution IGO License (https://creativecommons.org/licenses/by/3.0/igo), which permits use, distribution, and reproduction for non-commercial purposes in any medium, provided the original work is properly cited. In any reproduction of this article there should not be any suggestion that WHO or this article endorse any specific organization or products. The use of the WHO logo is not permitted. This notice should be preserved along with the article’s original URL.

Application of the high resolution return beam vidicon

NASA Technical Reports Server (NTRS)

Cantella, M. J.

1977-01-01

The Return Beam Vidicon (RBV) is a high-performance electronic image sensor and electrical storage component. It can accept continuous or discrete exposures. Information can be read out with a single scan or with many repetitive scans for either signal processing or display. Resolution capability is 10,000 TV lines/height, and at 100 lp/mm, performance matches or exceeds that of film, particularly with low-contrast imagery. Electronic zoom can be employed effectively for image magnification and data compression. The high performance and flexibility of the RBV permit wide application in systems for reconnaissance, scan conversion, information storage and retrieval, and automatic inspection and test. This paper summarizes the characteristics and performance parameters of the RBV and cites examples of feasible applications.

Space storable propellant performance program coaxial injector characterization

NASA Technical Reports Server (NTRS)

Burick, R. J.

1972-01-01

An experimental program was conducted to characterize the circular coaxial injector concept for application with the space-storable gas/liquid propellant combination FLOX(82.6% F2)/CH4(g) at high pressure. The primary goal of the program was to obtain high characteristic velocity efficiency in conjunction with acceptable injector/chamber compatibility. A series of subscale (single element) cold flow and hot fire experiments was employed to establish design criteria for a 3000-lbf (sea level) engine operating at 500 psia. The subscale experiments characterized both high performance core elements and peripheral elements with enhanced injector/chamber compatibility. The full-scale injector which evolved from the study demonstrated a performance level of 99 percent of the theoretical shifting characteristic exhaust velocity with low chamber heat flux levels. A 44-second-duration firing demonstrated the durability of the injector. Parametric data are presented that are applicable for the design of circular, coaxial injectors that operate with injection dynamics (fuel and oxidizer velocity, etc.) similar to those employed in the work reported.

Propulsive-lift concepts for improved low-speed performance of supersonic cruise arrow-wing configurations

NASA Technical Reports Server (NTRS)

Coe, P. L., Jr.

1976-01-01

Low-aspect-ratio highly swept arrow-wing supersonic aircraft possess high levels of aerodynamic efficiency at supersonic cruising speeds, however, their inherently poor low-speed lift characteristics require design constraints that compromise supersonic performance. The data discussed in this paper were obtained in wind tunnel tests with supersonic crusing configurations, in which propulsive-lift concepts were used to improve low-speed performance. The data show that the increased low-speed lift provided by propulsive-lift permits reduction of both wing size and installed thrust. This yields a batter engine/airframe match for improved supersonic cruise efficiency and range, while still providing acceptable take-off field lengths.

A Note on the Determination of "Acceptable" Performance in Thorndike's Standard of Fair Selection.

ERIC Educational Resources Information Center

Brown, Charles

1980-01-01

The determination of acceptable performance in Thorndike's constant ratio standard of fair selection is considered. It is shown that suitable choice of acceptable performance can make any minority-majority selection disparity consistent with Thorndike's standard. A rule for determining acceptable performance which avoids the Petersen-Novick…

Process Hood Stand Support Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

VAN KATWIJK, C.

2000-04-03

This package is written to comply with EN-6-035-00 for upgrade dedication of commercial grade items (CGI). The SNF-5953 CGI package provides the Technical evaluation to identify the critical characteristics and the acceptance criteria associated with the safety function of the Hood Stand Support Steel. Completion of the technical and quality requirements identified in the dedication package will provide enough data to be reasonably assured that CGI Hood Stand Support Steel will perform its SC function.

Predicting Acceptance of Diversity in Pre-Kindergarten Classrooms

ERIC Educational Resources Information Center

Sanders, Kay; Downer, Jason

2012-01-01

This study examined classroom-level contributors to an acceptance of diversity in publicly supported pre-kindergarten classrooms across 11 states. Classroom composition, process quality, and teacher characteristics were examined as predictors of diversity-promoting practices as measured by the ECERS-R, acceptance of diversity construct. Findings…

Electronic health record acceptance by physicians: testing an integrated theoretical model.

PubMed

Gagnon, Marie-Pierre; Ghandour, El Kebir; Talla, Pascaline Kengne; Simonyan, David; Godin, Gaston; Labrecque, Michel; Ouimet, Mathieu; Rousseau, Michel

2014-04-01

Several countries are in the process of implementing an Electronic Health Record (EHR), but limited physicians' acceptance of this technology presents a serious threat to its successful implementation. The aim of this study was to identify the main determinants of physician acceptance of EHR in a sample of general practitioners and specialists of the Province of Quebec (Canada). We sent an electronic questionnaire to physician members of the Quebec Medical Association. We tested four theoretical models (Technology acceptance model (TAM), Extended TAM, Psychosocial Model, and Integrated Model) using path analysis and multiple linear regression analysis in order to identify the main determinants of physicians' intention to use the EHR. We evaluated the modifying effect of sociodemographic characteristics using multi-group analysis of structural weights invariance. A total of 157 questionnaires were returned. The four models performed well and explained between 44% and 55% of the variance in physicians' intention to use the EHR. The Integrated model performed the best and showed that perceived ease of use, professional norm, social norm, and demonstrability of the results are the strongest predictors of physicians' intention to use the EHR. Age, gender, previous experience and specialty modified the association between those determinants and intention. The proposed integrated theoretical model is useful in identifying which factors could motivate physicians from different backgrounds to use the EHR. Physicians who perceive the EHR to be easy to use, coherent with their professional norms, supported by their peers and patients, and able to demonstrate tangible results are more likely to accept this technology. Age, gender, specialty and experience should also be taken into account when developing EHR implementation strategies targeting physicians. Copyright © 2013 Elsevier Inc. All rights reserved.

Analytical study on a two-dimensional plane of the off-design flow properties of tandem-bladed compressor stators

NASA Technical Reports Server (NTRS)

Sanger, N. L.

1973-01-01

The flow characteristics of several tandem bladed compressor stators were analytically evaluated over a range of inlet incidence angles. The ratios of rear-segment to front-segment chord and camber were varied. Results were also compared to the analytical performance of a reference solid blade section. All tandem blade sections exhibited lower calculated losses than the solid stator. But no one geometric configuration exhibited clearly superior characteristics. The front segment accepts the major effect of overall incidence angle change. Rear- to front-segment camber ratios of 4 and greater appeared to be limited by boundary-layer separation from the pressure surface of the rear segment.

Comparison of Different Scoring Systems Based on Both Donor and Recipient Characteristics for Predicting Outcome after Living Donor Liver Transplantation.

PubMed

Ma, Yucheng; Wang, Qing; Yang, Jiayin; Yan, Lunan

2015-01-01

In order to provide a good match between donor and recipient in liver transplantation, four scoring systems [the product of donor age and Model for End-stage Liver Disease score (D-MELD), the score to predict survival outcomes following liver transplantation (SOFT), the balance of risk score (BAR), and the transplant risk index (TRI)] based on both donor and recipient parameters were designed. This study was conducted to evaluate the performance of the four scores in living donor liver transplantation (LDLT) and compare them with the MELD score. The clinical data of 249 adult patients undergoing LDLT in our center were retrospectively evaluated. The area under the receiver operating characteristic curves (AUCs) of each score were calculated and compared at 1-, 3-, 6-month and 1-year after LDLT. The BAR at 1-, 3-, 6-month and 1-year after LDLT and the D-MELD and TRI at 1-, 3- and 6-month after LDLT showed acceptable performances in the prediction of survival (AUC>0.6), while the SOFT showed poor discrimination at 6-month after LDLT (AUC = 0.569). In addition, the D-MELD and BAR displayed positive correlations with the length of ICU stay (D-MELD, p = 0.025; BAR, p = 0.022). The SOFT was correlated with the time of mechanical ventilation (p = 0.022). The D-MELD, BAR and TRI provided acceptable performance in predicting survival after LDLT. However, even though these scoring systems were based on both donor and recipient parameters, only the BAR provided better performance than the MELD in predicting 1-year survival after LDLT.

Comparison of Different Scoring Systems Based on Both Donor and Recipient Characteristics for Predicting Outcome after Living Donor Liver Transplantation

PubMed Central

2015-01-01

Background and Objectives In order to provide a good match between donor and recipient in liver transplantation, four scoring systems [the product of donor age and Model for End-stage Liver Disease score (D-MELD), the score to predict survival outcomes following liver transplantation (SOFT), the balance of risk score (BAR), and the transplant risk index (TRI)] based on both donor and recipient parameters were designed. This study was conducted to evaluate the performance of the four scores in living donor liver transplantation (LDLT) and compare them with the MELD score. Patients and Methods The clinical data of 249 adult patients undergoing LDLT in our center were retrospectively evaluated. The area under the receiver operating characteristic curves (AUCs) of each score were calculated and compared at 1-, 3-, 6-month and 1-year after LDLT. Results The BAR at 1-, 3-, 6-month and 1-year after LDLT and the D-MELD and TRI at 1-, 3- and 6-month after LDLT showed acceptable performances in the prediction of survival (AUC>0.6), while the SOFT showed poor discrimination at 6-month after LDLT (AUC = 0.569). In addition, the D-MELD and BAR displayed positive correlations with the length of ICU stay (D-MELD, p = 0.025; BAR, p = 0.022). The SOFT was correlated with the time of mechanical ventilation (p = 0.022). Conclusion The D-MELD, BAR and TRI provided acceptable performance in predicting survival after LDLT. However, even though these scoring systems were based on both donor and recipient parameters, only the BAR provided better performance than the MELD in predicting 1-year survival after LDLT. PMID:26378786

Descriptive analysis and U.S. consumer acceptability of 6 green tea samples from China, Japan, and Korea.

PubMed

Lee, Jeehyun; Chambers, Delores H

2010-03-01

In the past, green tea has been one of the least popular nonalcoholic beverages for U.S. consumers. However, green tea has been receiving attention because of its potential health benefits. Knowing which green tea flavor attributes contribute to consumer liking will help the fast growing green tea business including green tea importers, tea shops, and beverage companies to understand which characteristics are most accepted by U.S. consumers. The objectives of this study were (1) to examine differences in acceptability of commonly available loose leaf and bagged green teas available from the major exporters to the U.S. (Japan, Korea, and China) and (2) to determine which green tea flavor characteristics are related to consumers' liking. In the study, consumers from the U.S. evaluated 6 green tea samples from China, Japan, and Korea for acceptability. A highly trained panel also evaluated the green tea samples to provide descriptive sensory attributes that might be related to acceptability. We found that U.S. consumers liked green tea samples with lower flavor intensity and lower bitterness intensity. Consumers' acceptability of green tea was negatively correlated with spinach and animalic flavor and bitterness and astringency of green teas evaluated using descriptive sensory analysis, but the correlation was only moderate. To learn what green tea flavor characteristics influence consumers' liking, future studies using more green tea samples with different flavor profiles are needed.

Implementation of a Trailing-Edge Flap Analysis Model in the NASA Langley CAMRAD.MOD1/Hires Program

NASA Technical Reports Server (NTRS)

Charles, Bruce

1999-01-01

Continual advances in rotorcraft performance, vibration and acoustic characteristics are being sought by rotary-wing vehicle manufacturers to improve efficiency, handling qualities and community noise acceptance of their products. The rotor system aerodynamic and dynamic behavior are among the key factors which must be addressed to meet the desired goals. Rotor aerodynamicists study how airload redistribution impacts performance and noise, and seek ways to achieve better airload distribution through changes in local aerodynamic response characteristics. One method currently receiving attention is the use of trailing-edge flaps mounted on the rotor blades to provide direct control of a portion of the spanwise lift characteristics. The following work describes the incorporation of a trailing-edge flap model in the CAMRAD.Mod1/FHUS comprehensive rotorcraft analysis code. The CAM-RAD.Mod1/HIRES analysis consists of three separate executable codes. These include the comprehensive trim analysis, CAMRAD.Mod1, the Indicial Post-Processor, IPP, for high resolution airloads, and AIRFOIL, which produces the rotor airfoil tables from input airfoil section characteristics. The modifications made to these components permitting analysis of flapped rotor configurations are documented herein along with user instructions detailing the new input variables and operational notes.

Method for analyzing the chemical composition of liquid effluent from a direct contact condenser

DOEpatents

Bharathan, Desikan; Parent, Yves; Hassani, A. Vahab

2001-01-01

A computational modeling method for predicting the chemical, physical, and thermodynamic performance of a condenser using calculations based on equations of physics for heat, momentum and mass transfer and equations of equilibrium thermodynamics to determine steady state profiles of parameters throughout the condenser. The method includes providing a set of input values relating to a condenser including liquid loading, vapor loading, and geometric characteristics of the contact medium in the condenser. The geometric and packing characteristics of the contact medium include the dimensions and orientation of a channel in the contact medium. The method further includes simulating performance of the condenser using the set of input values to determine a related set of output values such as outlet liquid temperature, outlet flow rates, pressures, and the concentration(s) of one or more dissolved noncondensable gas species in the outlet liquid. The method may also include iteratively performing the above computation steps using a plurality of sets of input values and then determining whether each of the resulting output values and performance profiles satisfies acceptance criteria.

Sensory attributes and consumer acceptance of sweetpotato cultivars with varying flesh colors

USDA-ARS?s Scientific Manuscript database

The sensory characteristics of sweet potatoes (n = 12 cultivars) with varying flesh color (orange, purple, yellow) and the impact of flesh colors on consumer acceptance were evaluated. A lexicon was developed for sweet potato flavor followed by consumer acceptance testing conducted with and without ...

Acceptability of Interventions Delivered Online and Through Mobile Phones for People Who Experience Severe Mental Health Problems: A Systematic Review.

PubMed

Berry, Natalie; Lobban, Fiona; Emsley, Richard; Bucci, Sandra

2016-05-31

Psychological interventions are recommended for people with severe mental health problems (SMI). However, barriers exist in the provision of these services and access is limited. Therefore, researchers are beginning to develop and deliver interventions online and via mobile phones. Previous research has indicated that interventions delivered in this format are acceptable for people with SMI. However, a comprehensive systematic review is needed to investigate the acceptability of online and mobile phone-delivered interventions for SMI in depth. This systematic review aimed to 1) identify the hypothetical acceptability (acceptability prior to or without the delivery of an intervention) and actual acceptability (acceptability where an intervention was delivered) of online and mobile phone-delivered interventions for SMI, 2) investigate the impact of factors such as demographic and clinical characteristics on acceptability, and 3) identify common participant views in qualitative studies that pinpoint factors influencing acceptability. We conducted a systematic search of the databases PubMed, Embase, PsycINFO, CINAHL, and Web of Science in April 2015, which yielded a total of 8017 search results, with 49 studies meeting the full inclusion criteria. Studies were included if they measured acceptability through participant views, module completion rates, or intervention use. Studies delivering interventions were included if the delivery method was online or via mobile phones. The hypothetical acceptability of online and mobile phone-delivered interventions for SMI was relatively low, while actual acceptability tended to be high. Hypothetical acceptability was higher for interventions delivered via text messages than by emails. The majority of studies that assessed the impact of demographic characteristics on acceptability reported no significant relationships between the two. Additionally, actual acceptability was higher when participants were provided remote online support. Common qualitative factors relating to acceptability were safety and privacy concerns, the importance of an engaging and appealing delivery format, the inclusion of peer support, computer and mobile phone literacy, technical issues, and concerns about the impact of psychological state on intervention use. This systematic review provides an in-depth focus on the acceptability of online and mobile phone-delivered interventions for SMI and identified the need for further research in this area. Based on the results from this review, we recommend that researchers measure both hypothetical and actual acceptability to identify whether initial perceptions of online and mobile phone-delivered interventions change after access. In addition, more focus is needed on the potential impact of demographic and clinical characteristics on acceptability. The review also identified issues with module completion rates and intervention use as measures of acceptability. We therefore advise researchers to obtain qualitative reports of acceptability throughout each phase of intervention development and testing. Further implications and opportunities for future research are discussed.

Acceptability of Interventions Delivered Online and Through Mobile Phones for People Who Experience Severe Mental Health Problems: A Systematic Review

PubMed Central

Lobban, Fiona; Emsley, Richard; Bucci, Sandra

2016-01-01

Background Psychological interventions are recommended for people with severe mental health problems (SMI). However, barriers exist in the provision of these services and access is limited. Therefore, researchers are beginning to develop and deliver interventions online and via mobile phones. Previous research has indicated that interventions delivered in this format are acceptable for people with SMI. However, a comprehensive systematic review is needed to investigate the acceptability of online and mobile phone-delivered interventions for SMI in depth. Objective This systematic review aimed to 1) identify the hypothetical acceptability (acceptability prior to or without the delivery of an intervention) and actual acceptability (acceptability where an intervention was delivered) of online and mobile phone-delivered interventions for SMI, 2) investigate the impact of factors such as demographic and clinical characteristics on acceptability, and 3) identify common participant views in qualitative studies that pinpoint factors influencing acceptability. Methods We conducted a systematic search of the databases PubMed, Embase, PsycINFO, CINAHL, and Web of Science in April 2015, which yielded a total of 8017 search results, with 49 studies meeting the full inclusion criteria. Studies were included if they measured acceptability through participant views, module completion rates, or intervention use. Studies delivering interventions were included if the delivery method was online or via mobile phones. Results The hypothetical acceptability of online and mobile phone-delivered interventions for SMI was relatively low, while actual acceptability tended to be high. Hypothetical acceptability was higher for interventions delivered via text messages than by emails. The majority of studies that assessed the impact of demographic characteristics on acceptability reported no significant relationships between the two. Additionally, actual acceptability was higher when participants were provided remote online support. Common qualitative factors relating to acceptability were safety and privacy concerns, the importance of an engaging and appealing delivery format, the inclusion of peer support, computer and mobile phone literacy, technical issues, and concerns about the impact of psychological state on intervention use. Conclusions This systematic review provides an in-depth focus on the acceptability of online and mobile phone-delivered interventions for SMI and identified the need for further research in this area. Based on the results from this review, we recommend that researchers measure both hypothetical and actual acceptability to identify whether initial perceptions of online and mobile phone-delivered interventions change after access. In addition, more focus is needed on the potential impact of demographic and clinical characteristics on acceptability. The review also identified issues with module completion rates and intervention use as measures of acceptability. We therefore advise researchers to obtain qualitative reports of acceptability throughout each phase of intervention development and testing. Further implications and opportunities for future research are discussed. PMID:27245693

Digital divide: variation in internet and cellular phone use among women attending an urban sexually transmitted infections clinic.

PubMed

Samal, Lipika; Hutton, Heidi E; Erbelding, Emily J; Brandon, Elizabeth S; Finkelstein, Joseph; Chander, Geetanjali

2010-01-01

We sought to describe: (1) the prevalence of internet, cellular phone, and text message use among women attending an urban sexually transmitted infections (STI) clinic, (2) the acceptability of health advice by each mode of information and communication technology (ICT), and (3) demographic characteristics associated with ICT use. This study is a cross-sectional survey of 200 English-speaking women presenting to a Baltimore City STI clinic with STI complaints. Participants completed a self-administered survey querying ICT use and demographic characteristics. Three separate questions asked about interest in receiving health advice delivered by the three modalities: internet, cellular phone, and text message. We performed logistic regression to examine how demographic factors (age, race, and education) are associated with likelihood of using each modality. The median age of respondents was 27 years; 87% were African American, and 71% had a high school diploma. The rate of any internet use was 80%; 31% reported daily use; 16% reported weekly use; and 32% reported less frequent use. Almost all respondents (93%) reported cellular phone use, and 79% used text messaging. Acceptability of health advice by each of the three modalities was about 60%. In multivariate analysis, higher education and younger age were associated with internet use, text messaging, and cellular phone use. Overall rate of internet use was high, but there was an educational disparity in internet use. Cellular phone use was almost universal in this sample. All three modalities were equally acceptable forms of health communication. Describing baseline ICT access and the acceptability of health advice via ICT, as we have done, is one step toward determining the feasibility of ICT-delivered health interventions in urban populations.

Enhanced intelligent water drops algorithm for multi-depot vehicle routing problem

PubMed Central

Akutsah, Francis; Olusanya, Micheal O.; Adewumi, Aderemi O.

2018-01-01

The intelligent water drop algorithm is a swarm-based metaheuristic algorithm, inspired by the characteristics of water drops in the river and the environmental changes resulting from the action of the flowing river. Since its appearance as an alternative stochastic optimization method, the algorithm has found applications in solving a wide range of combinatorial and functional optimization problems. This paper presents an improved intelligent water drop algorithm for solving multi-depot vehicle routing problems. A simulated annealing algorithm was introduced into the proposed algorithm as a local search metaheuristic to prevent the intelligent water drop algorithm from getting trapped into local minima and also improve its solution quality. In addition, some of the potential problematic issues associated with using simulated annealing that include high computational runtime and exponential calculation of the probability of acceptance criteria, are investigated. The exponential calculation of the probability of acceptance criteria for the simulated annealing based techniques is computationally expensive. Therefore, in order to maximize the performance of the intelligent water drop algorithm using simulated annealing, a better way of calculating the probability of acceptance criteria is considered. The performance of the proposed hybrid algorithm is evaluated by using 33 standard test problems, with the results obtained compared with the solutions offered by four well-known techniques from the subject literature. Experimental results and statistical tests show that the new method possesses outstanding performance in terms of solution quality and runtime consumed. In addition, the proposed algorithm is suitable for solving large-scale problems. PMID:29554662

Enhanced intelligent water drops algorithm for multi-depot vehicle routing problem.

PubMed

Ezugwu, Absalom E; Akutsah, Francis; Olusanya, Micheal O; Adewumi, Aderemi O

2018-01-01

The intelligent water drop algorithm is a swarm-based metaheuristic algorithm, inspired by the characteristics of water drops in the river and the environmental changes resulting from the action of the flowing river. Since its appearance as an alternative stochastic optimization method, the algorithm has found applications in solving a wide range of combinatorial and functional optimization problems. This paper presents an improved intelligent water drop algorithm for solving multi-depot vehicle routing problems. A simulated annealing algorithm was introduced into the proposed algorithm as a local search metaheuristic to prevent the intelligent water drop algorithm from getting trapped into local minima and also improve its solution quality. In addition, some of the potential problematic issues associated with using simulated annealing that include high computational runtime and exponential calculation of the probability of acceptance criteria, are investigated. The exponential calculation of the probability of acceptance criteria for the simulated annealing based techniques is computationally expensive. Therefore, in order to maximize the performance of the intelligent water drop algorithm using simulated annealing, a better way of calculating the probability of acceptance criteria is considered. The performance of the proposed hybrid algorithm is evaluated by using 33 standard test problems, with the results obtained compared with the solutions offered by four well-known techniques from the subject literature. Experimental results and statistical tests show that the new method possesses outstanding performance in terms of solution quality and runtime consumed. In addition, the proposed algorithm is suitable for solving large-scale problems.

Willingness to Accept HIV Pre-Exposure Prophylaxis among Chinese Men Who Have Sex with Men

PubMed Central

Li, Shuming; Li, Dongliang; Zhang, Lifen; Fan, Wensheng; Yang, Xueying; Yu, Mingrun; Xiao, Dong; Yan, Li; Zhang, Zheng; Shi, Wei; Luo, Fengji; Ruan, Yuhua; Jin, Qi

2012-01-01

Objective We investigated the awareness and acceptability of pre-exposure prophylaxis (PrEP) among men who have sex with men (MSM) and potential predicting factors. Methods This study was conducted among MSM in Beijing, China. Study participants, randomly selected from an MSM cohort, completed a structured questionnaire, and provided their blood samples to test for HIV infection and syphilis. Univariate logistic regression analyses were performed to evaluate the factors associated with willingness to accept (WTA) PrEP. Factors independently associated with willingness to accept were identified by entering variables into stepwise logistic regression analysis. Results A total of 152 MSM completed the survey; 11.2% had ever heard of PrEP and 67.8% were willing to accept it. Univariate analysis showed that age, years of education, consistent condom use in the past 6 months, heterosexual behavior in the past 6 months, having ever heard of PrEP and the side effects of antiretroviral drugs, and worry about antiretroviral drugs cost were significantly associated with willingness to accept PrEP. In the multivariate logistic regression model, only consistent condom use in the past 6 months (odds ratio [OR]: 0.31; 95% confidence interval [CI]: 0.13–0.70) and having ever heard of the side effects of antiretroviral drugs (OR: 0.30; 95% CI: 0.14–0.67) were independently associated with willingness to accept PrEP. Conclusions The awareness of PrEP in the MSM population was low. Sexual behavioral characteristics and knowledge about ART drugs may have effects on willingness to accept PrEP. Comprehensive prevention strategies should be recommended in the MSM community. PMID:22479320

Hungry for an intervention? Adolescents' ratings of acceptability of eating-related intervention strategies.

PubMed

Stok, F Marijn; de Ridder, Denise T D; de Vet, Emely; Nureeva, Liliya; Luszczynska, Aleksandra; Wardle, Jane; Gaspar, Tania; de Wit, John B F

2016-01-05

Effective interventions promoting healthier eating behavior among adolescents are urgently needed. One factor that has been shown to impact effectiveness is whether the target population accepts the intervention. While previous research has assessed adults' acceptance of eating-related interventions, research on the opinion of adolescents is lacking. The current study addressed this gap in the literature. Two thousand seven hundred sixty four adolescents (aged 10-17 years) from four European countries answered questions about individual characteristics (socio-demographics, anthropometrics, and average daily intake of healthy and unhealthy foods) and the acceptability of ten eating-related intervention strategies. These strategies varied in type (either promoting healthy eating or discouraging unhealthy eating), level of intrusiveness, setting (home, school, broader out-of-home environment), and change agent (parents, teacher, policy makers). Based on adolescents' acceptability ratings, strategies could be clustered into two categories, those promoting healthy eating and those discouraging unhealthy eating, with acceptability rated significantly higher for the former. Acceptability of intervention strategies was rated moderate on average, but higher among girls, younger, overweight and immigrant adolescents, and those reporting healthier eating. Polish and Portuguese adolescents were overall more accepting of strategies than UK and Dutch adolescents. Adolescents preferred intervention strategies that promote healthy eating over strategies that discourage unhealthy eating. Level of intrusiveness affected acceptability ratings for the latter type of strategies only. Various individual and behavioral characteristics were associated with acceptability. These findings provide practical guidance for the selection of acceptable intervention strategies to improve adolescents' eating behavior.

32 CFR 32.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... acceptable characteristics or minimum acceptable standards. (iv) The specific features of “brand name or... expected to exceed the simplified acquisition threshold, specifies a “brand name” product. (4) The proposed...

A comparison of five surveys that identify individuals at risk for airflow obstruction and chronic obstructive pulmonary disease.

PubMed

Sogbetun, Folarin; Eschenbacher, William L; Welge, Jeffrey A; Panos, Ralph J

2016-11-01

The predictive characteristics of different screening surveys for the recognition of individuals at risk for airflow obstruction (AFO) have not been evaluated simultaneously in the same population. To compare five AFO/COPD screening questionnaires. 383 individuals completed the Veterans Airflow Obstruction Screening Questionnaire, Personal Level Screener for COPD (VAFOSQ), the 11-Q COPD Screening Questionnaire (11-Q), the COPD Population Screener (COPD-PS) and the Lung Function Questionnaire (LFQ) and performed spirometry. AFO was defined as forced expiratory volume in one second divided by the forced vital capacity (FEV 1 /FVC) < 0.7, fixed ratio (FR) or FEV 1 /FVC < lower limit of normal (LLN). The predictive characteristics of the five questionnaires were calculated and non-parametric receiver operating characteristic (ROC) curves estimated by logistic regression. 376 participants completed at least two of the questionnaires and performed technically acceptable spirometry. AFO was present in 102 (27.1%) and 150 (39.9%) based on LLN and FR, respectively. The number of individuals positively selected by the VAFOSQ was 227, PLS 128, 11-Q 236, COPD-PS 217, and LFQ 328. The area under the ROC curves for the questionnaires was between 0.60 and 0.66 (LLN) and 0.58 and 0.66 (FR). Although these screening surveys have acceptable and similar predictive ability for the identification of AFO, their published thresholds lead to substantially different classification rates. The choice of an appropriate threshold for the identification of individuals with possible AFO/COPD should consider the underlying prevalence of AFO/COPD in the target population and the relative costs of misclassifying affected and unaffected cases. None. Veterans Health Administration. Published by Elsevier Ltd.

The Use of Thermal Spraying to Enhance the Bonding Characteristics of a Urethane Coated Propeller

DTIC Science & Technology

1999-05-03

NAME(S) AND ADDRESS( ES ) 8. PERFORMING ORGANIZATION REPORT NUMBER U.S. Naval Academy USNA Trident Scholar project report Annapolis, MD no. 265 (1999...9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS( ES ) 10. SPONSORING/MONITORING AGENCY REPORT NUMBER 11. SUPPLEMENTARY NOTES Accepted by the U.S...TEST: A 90-degree Peel Test was used to examine the bond strength of the specimens. A SATEC tensile test machine was used with a 2000 lb. load cell

Design of a flight director/configuration management system for piloted STOL approaches

NASA Technical Reports Server (NTRS)

Hoh, R. H.; Klein, R. H.; Johnson, W. A.

1973-01-01

The design and characteristics of a flight director for V/STOL aircraft are discussed. A configuration management system for piloted STOL approaches is described. The individual components of the overall system designed to reduce pilot workload to an acceptable level during curved, decelerating, and descending STOL approaches are defined. The application of the system to augmentor wing aircraft is analyzed. System performance checks and piloted evaluations were conducted on a flight simulator and the results are summarized.

Validity of a Battery of Experimental Tests in Predicting Performance of Navy Project 100,000 Personnel

DTIC Science & Technology

1980-09-01

divided into four batteries, each of which was then administered to samples ranging in size from 5,000 to 12,000 recruits. The men tested were...reject them or to accept only as many as required to fill quotas. Opponents of this policy have argued that men low on the aptitude scale could and...ratings, since such rat ings represent a high level of ac’-iovemnopt for low-scoring men . Length of Service and Attrition Characteristics To permit

Testing and performance characteristics of a 1-kW free piston Stirling engine

NASA Technical Reports Server (NTRS)

Schreiber, J.

1983-01-01

A 1 kW single cylinder free piston Stirling engine, configured as a research engine, was tested with helium working gas. The engine features a posted displacer and dashpot load. The test results show the engine power output and efficiency to be lower than those observed during acceptance tests by the manufacturer. Engine tests results are presented for operation at the two heater head temperatures and with two regenerator porosities, along with flow test results for the heat exchangers.

Quantitative Evaluation of 3 DBMS: ORACLE, SEED AND INGRES

NASA Technical Reports Server (NTRS)

Sylto, R.

1984-01-01

Characteristics required for NASA scientific data base management application are listed as well as performance testing objectives. Results obtained for the ORACLE, SEED, and INGRES packages are presented in charts. It is concluded that vendor packages can manage 130 megabytes of data at acceptable load and query rates. Performance tests varying data base designs and various data base management system parameters are valuable to applications for choosing packages and critical to designing effective data bases. An applications productivity increases with the use of data base management system because of enhanced capabilities such as a screen formatter, a reporter writer, and a data dictionary.

A descriptive-comparative study of performance characteristics in futsal players of different levels.

PubMed

Naser, Naser; Ali, Ajmol

2016-09-01

Despite the increasing popularity of futsal, there is little information on performance characteristics of players. We aimed to determine the validity and reliability of a futsal shooting test and to evaluate and compare performance characteristics of three futsal playing levels. Twenty-four males (n = 8 elite, n = 8 semi-elite, n = 8 social) completed two trials to examine the reliability of the Massey Futsal Shooting Test (MFST) and to compare various fitness characteristics between groups. MFST time taken (P = 0.010), shot speed (P < 0.001) and points scored per shot (P < 0.001) were better for elite relative to social players. Test-retest reliability was acceptable for all groups, but it was most repeatable in elite players. Loughborough Soccer Passing Test performance was better in elite relative to social players (P = 0.004). There were no differences in countermovement-jump height between groups. Elite players ran faster over 5 m than both semi-elite (P = 0.043) and social (P = 0.002) and faster than the social players through 10 m (P = 0.028) and 20 m (P = 0.026). Distance covered in the Futsal Intermittent Endurance Test was higher in elite relative to semi-elite (P = 0.005) and social (P < 0.001) groups. The MFST is a valid and reliable protocol to assess futsal shooting-skill performance; elite players have superior shooting and passing skill and have greater sprinting and intermittent-running ability.

Consumer Acceptance of Dry Dog Food Variations

PubMed Central

Donfrancesco, Brizio Di; Koppel, Kadri; Swaney-Stueve, Marianne; Chambers, Edgar

2014-01-01

Simple Summary The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Pet owners evaluated dry dog food samples available in the US market. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Abstract The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog’s liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products. PMID:26480043

"Sisters, Mothers, Daughters and Aunties": HIV vaccine acceptability among African, Caribbean and other Black women in Toronto.

PubMed

Weaver, James; Newman, Peter A; Williams, Charmaine C; Massaquoi, Notisha; Brown, Marsha

2013-08-20

Black women in Canada are at disproportionately high risk for HIV. We assessed HIV vaccine acceptability and correlates of acceptability among Black women from African and Caribbean communities in Toronto. "Sisters, Daughters, Mothers, and Aunties" was a community-based research project. Black women of African and Caribbean descent were recruited using venue-based sampling across diverse community organizations in Toronto. We used a structured questionnaire to collect data on socio-demographic characteristics and acceptability of 8 future HIV vaccines, each defined by a set of 7 dichotomous attributes. Conjoint analysis was used to quantify the relative impact of vaccine attributes on acceptability, with multiple regression to adjust for socio-demographic characteristics associated with overall acceptability. Mean vaccine acceptability was 58.8 (SD=17.2) on the 100-point scale. Efficacy had the greatest impact on acceptability, followed by side effects, cost, duration of protection, and number of doses. Acceptability of a high (99%) efficacy vaccine (70.1/100) was significantly greater than for a 50% efficacy vaccine (47.6/100). Vaccine acceptability was significantly higher among women of Caribbean versus African descent, ever married versus single women, and women with full-time versus part-time employment. Black women in Toronto indicated a modest level of acceptability for future HIV vaccines. Educational interventions that address the benefits of partially efficacious vaccines and clearly explain potential side effects, as well as vaccine cost subsidies may promote HIV vaccine uptake. Differences in acceptability within Black communities suggest that tailored multi-level interventions may mitigate barriers to uptake.

Chia (Salvia hispanica L) gel can be used as egg or oil replacer in cake formulations.

PubMed

Borneo, Rafael; Aguirre, Alicia; León, Alberto E

2010-06-01

This study determined the overall acceptability, sensory characteristics, functional properties, and nutrient content of cakes made using chia (Salvia hispanica L) gel as a replacement for oil or eggs. Chia gel was used to replace 25%, 50%, and 75% of oil or eggs in a control cake formulation. Seventy-five untrained panelists participated in rating cakes on a seven-point hedonic scale. Analysis of variance conducted on the sensory characteristics and overall acceptability indicated a statistically significant effect when replacing oil or eggs for color, taste, texture, and overall acceptability (P<0.05). Post hoc analysis (using Fisher's least significant difference method) indicated that the 25% chia gel cakes were not significantly different from the control for color, taste, texture, and overall acceptability. The 50% oil substituted (with chia gel) cake, compared to control, had 36 fewer kilocalories and 4 g less fat per 100-g portion. Cake weight was not affected by chia gel in the formulation, although cake volume was lower as the percentage of substitution increased. Symmetry was generally not affected. This study demonstrates that chia gel can replace as much as 25% of oil or eggs in cakes while yielding a more nutritious product with acceptable sensory characteristics. 2010 American Dietetic Association. Published by Elsevier Inc. All rights reserved.

Robust Constrained Optimization Approach to Control Design for International Space Station Centrifuge Rotor Auto Balancing Control System

NASA Technical Reports Server (NTRS)

Postma, Barry Dirk

2005-01-01

This thesis discusses application of a robust constrained optimization approach to control design to develop an Auto Balancing Controller (ABC) for a centrifuge rotor to be implemented on the International Space Station. The design goal is to minimize a performance objective of the system, while guaranteeing stability and proper performance for a range of uncertain plants. The Performance objective is to minimize the translational response of the centrifuge rotor due to a fixed worst-case rotor imbalance. The robustness constraints are posed with respect to parametric uncertainty in the plant. The proposed approach to control design allows for both of these objectives to be handled within the framework of constrained optimization. The resulting controller achieves acceptable performance and robustness characteristics.

GEOSAT Follow-On (GFO) Altimeter Document Series, Volume 8: GFO Altimeter Engineering Assessment Report Update:The First 109 Cycles Since Acceptance November 29, 2000 to December 26, 2005. Version 1, Volume 8

NASA Technical Reports Server (NTRS)

Conger, A. M.; Hancock, D. W., III; Hayne, G. S.; Brooks, R. L.

2006-01-01

The purpose of this document is to present and document GFO performance analyses and results. This is the fifth Assessment Report since the initial report. This report extends the performance assessment since acceptance to 26 December 2005. The initial GFO Altimeter Engineering Assessment Report, March 2001 (NASA/TM-2001-209984/Ver.1/Vol.1) covered the GFO performance from Launch to Acceptance (10 February 1998 to 29 November 2000). The second of the series covered the performance from Acceptance to the end of Cycle 20 (29 November 2000 to 21 November 2001). The third of the series covered the performance from Acceptance to the end of Cycle 42 (29 November 2000 to 30 November 2002). The fourth of the series covered the performance from Acceptance to the end of Cycle 64 (29 November 2000 to 17 December 2003). The fifth of the series covered performance from Acceptance to the end of Cycle 86 (29 November 2000 to 17 December 2004). Since launch, we have performed a variety of GFO performance studies; an accumulative index of those studies is provided in Appendix A.

Exploring the Intrinsic Motivation of Hedonic Information Systems Acceptance: Integrating Hedonic Theory and Flow with TAM

NASA Astrophysics Data System (ADS)

Wang, Zhihuan

Research on Information Systems (IS) acceptance is substantially focused on extrinsic motivation in workplaces, little is known about the underlying intrinsic motivations of Hedonic IS (HIS) acceptance. This paper proposes a hybrid HIS acceptance model which takes the unique characteristics of HIS and multiple identities of a HIS user into consideration by interacting Hedonic theory, Flow theory with Technology Acceptance Model (TAM). The model was empirically tested by a field survey. The result indicates that emotional responses, imaginal responses, and flow experience are three main contributions of HIS acceptance.

Performance limitations of bilateral force reflection imposed by operator dynamic characteristics

NASA Technical Reports Server (NTRS)

Chapel, Jim D.

1989-01-01

A linearized, single-axis model is presented for bilateral force reflection which facilitates investigation into the effects of manipulator, operator, and task dynamics, as well as time delay and gain scaling. Structural similarities are noted between this model and impedance control. Stability results based upon this model impose requirements upon operator dynamic characteristics as functions of system time delay and environmental stiffness. An experimental characterization reveals the limited capabilities of the human operator to meet these requirements. A procedure is presented for determining the force reflection gain scaling required to provide stability and acceptable operator workload. This procedure is applied to a system with dynamics typical of a space manipulator, and the required gain scaling is presented as a function of environmental stiffness.

Solar thermal plant impact analysis and requirements definition

NASA Technical Reports Server (NTRS)

Gupta, Y. P.

1980-01-01

Progress on a continuing study comprising of ten tasks directed at defining impact and requirements for solar thermal power systems (SPS), 1 to 10 MWe each in capacity, installed during 1985 through year 2000 in a utility or a nonutility load in the United States is summarized. The point focus distributed receiver (PFDR) solar power systems are emphasized. Tasks 1 through 4, completed to date, include the development of a comprehensive data base on SPS configurations, their performance, cost, availability, and potential applications; user loads, regional characteristics, and an analytic methodology that incorporates the generally accepted utility financial planning methods and several unique modifications to treat the significant and specific characteristics of solar power systems deployed in either central or distributed power generation modes, are discussed.

Understanding Learner Acceptance of Learning Objects: The Roles of Learning Object Characteristics and Individual Differences

ERIC Educational Resources Information Center

Lau, Siong-Hoe; Woods, Peter C.

2009-01-01

Many organisations and institutions have integrated learning objects into their e-learning systems to make the instructional resources more efficient. Like any other information systems, this trend has made user acceptance of learning objects an increasingly critical issue as a high level of learner satisfaction and acceptance reflects that the…

Origins and Predictors of Friendships in 6- to 8-Year-Old Children Born at Neonatal Risk.

PubMed

Heuser, Katharina M; Jaekel, Julia; Wolke, Dieter

2018-02-01

To test effects of gestational age (GA), early social experiences, and child characteristics on children's friendships and perceived peer acceptance. As part of the prospective Bavarian Longitudinal Study (1147 children, 25-41 weeks GA), children's friendships (eg, number of friends, frequency of meeting friends) and perceived peer acceptance were assessed before school entry (6 years of age) and in second grade (8 years of age) using child and parent reports. The parent-infant relationship was evaluated during the 5 months after birth. Child characteristics (ie, height, motor impairment, cognitive ability, behavioral problems) were measured at 6 years of age. Multiple regressions estimated effects of GA, parent-infant relationship, and child characteristics. Overall, children with higher GA had more friends, spent more time with friends, and were more accepted by peers at 6 years of age. Better parent-infant relationships, higher cognitive abilities, and fewer motor and behavioral problems predicted more friendships and higher peer acceptance after adjusting for sex, socioeconomic status, multiples, siblings, and special schooling. Across all GA groups, number of friends (child report: mean change, 1.77; 95% CI, 1.57-1.96) and peer acceptance (child report: mean change, 0.14; 95% CI, 0.09-0.19; parent report: mean change, 0.14; 95% CI, 0.11-0.17) increased with age, but the increase in number of friends was higher among preterm children (ie, interaction effect age*GA group: P = .034). Our results provide evidence of a dose-response effect of low GA on children's friendships and perceived peer acceptance. Improvements in early parenting and motor, cognitive, and behavioral development may facilitate friendships and peer acceptance for all children across the gestation spectrum. Copyright © 2017 Elsevier Inc. All rights reserved.

Person identification in irregular cardiac conditions using electrocardiogram signals.

PubMed

Sidek, Khairul Azami; Khalil, Ibrahim

2011-01-01

This paper presents a person identification mechanism in irregular cardiac conditions using ECG signals. A total of 30 subjects were used in the study from three different public ECG databases containing various abnormal heart conditions from the Paroxysmal Atrial Fibrillation Predicition Challenge database (AFPDB), MIT-BIH Supraventricular Arrthymia database (SVDB) and T-Wave Alternans Challenge database (TWADB). Cross correlation (CC) was used as the biometric matching algorithm with defined threshold values to evaluate the performance. In order to measure the efficiency of this simple yet effective matching algorithm, two biometric performance metrics were used which are false acceptance rate (FAR) and false reject rate (FRR). Our experimentation results suggest that ECG based biometric identification with irregular cardiac condition gives a higher recognition rate of different ECG signals when tested for three different abnormal cardiac databases yielding false acceptance rate (FAR) of 2%, 3% and 2% and false reject rate (FRR) of 1%, 2% and 0% for AFPDB, SVDB and TWADB respectively. These results also indicate the existence of salient biometric characteristics in the ECG morphology within the QRS complex that tends to differentiate individuals.

An instrument for assessment of videotapes of general practitioners' performance.

PubMed Central

Cox, J; Mulholland, H

1993-01-01

OBJECTIVES--To identify those important characteristics of doctors' and patients' behaviour that distinguish between "good" and "bad" consultations when viewed on videotape; to use these characteristics to develop a reliable instrument for assessing general practitioners' performance in their own consultations. DESIGN--Questionnaires completed by patients, general practitioner trainers, and general practitioner trainees. Reliability of draft instrument tested by general practitioner trainers. SETTING--All vocational training schemes for general practice in the Northern region of England. SUBJECTS--First stage: 76 patients in seven groups, 108 general practice trainers in 12 groups, and 122 general practice trainees in 10 groups. Second stage: 85 general practice trainers in 12 groups. MAIN OUTCOME MEASURES--Trainers' ratings of importance; alpha coefficients of draft instrument by trainee, group, and consultation. RESULTS--6890 characteristics of good and bad consultations were consolidated into a draft assessment instrument consisting of 46 pairs of definitions separated by six point bipolar scales. Nine statement pairs given low importance ratings by trainers were eliminated, reducing the instrument to 37 statement pairs. To test reliability, general practitioner trainers used the instrument to assess three consultations. With the exception of one group of trainers, all alpha coefficients exceeded the acceptable level of 0.80. CONCLUSION--The instrument produced is reliable for assessing general practitioners' performance in their own consultations. PMID:8490501

Acceptance and barriers to access of occupational e-mental health: cross-sectional findings from a health-risk population of employees.

PubMed

Hennemann, Severin; Witthöft, Michael; Bethge, Matthias; Spanier, Katja; Beutel, Manfred E; Zwerenz, Rüdiger

2018-04-01

Occupational e-mental-health (OEMH) may extend existing instruments for preservation or restoration of health and work ability. As a key precondition to efficient implementation, this study examined acceptance and person-centered barriers to potential uptake of OEMH for work-related distress in employees with an elevated risk of early retirement. Within the framework of the "Third German Sociomedical Panel of Employees", 1829 employees with prior sickness absence payments filled out a self-administered questionnaire. Participants had a mean age of 49.93 years (SD = 4.06). 6.2% indicated prior use of eHealth interventions. Potential predictors of acceptance of OEMH were examined based on the "Unified Theory of Acceptance and Use of Technology" (UTAUT) extended by work ability, mental health, eHealth literacy and demographic characteristics. 89.1% (n = 1579) showed low to moderate acceptance (M = 2.20, SD = 1.05, range 1-5). A path analysis revealed significant, positive direct effects of UTAUT predictors on acceptance (performance expectancy: 0.48, SE = 0.02, p < 0.001; effort expectancy: 0.20, SE = 0.02, p < 0.001; social influence: 0.28, SE = 0.02, p < 0.001).Online time and frequency of online health information search were further positive direct predictors of acceptance. Model fit was good [χ 2 (7) = 12.91, p = 0.07, RMSEA = 0.02, CFI = 1.00, TLI = 0.99, SRMR = 0.01]. Attitudes towards OEMH are rather disadvantageous in the studied risk group. Implementation of OEMH, therefore, requires a-priori education including promotion of awareness, favorable attitudes regarding efficacy and usability in a collaborative approach.

Determinants associated with E-cigarette adoption and use intention among college students.

PubMed

Lee, Hsiao-Yun; Lin, Hsien-Chang; Seo, Dong-Chul; Lohrmann, David K

2017-02-01

This study investigated characteristics of potential and current e-cigarette users based on four different levels of use acceptability along with the determinants that promote e-cigarette use acceptability among college students. College students (N=1198) aged 18-25years at a Midwestern university were surveyed in September-October 2015. Participants were categorized into four groups based on e-cigarette use acceptability adapted from the Diffusion of Innovation Theory (i.e., laggards, late majority, early majority, and adopters). Multinomial logistic regressions and Heckman two-step selection procedures were performed to examine the determinants that promote e-cigarette use acceptability. Approximately 40% of the participants reported ever using e-cigarettes. E-cigarette adopters agreed that e-cigarettes are more socially acceptable than traditional tobacco cigarettes (relative risk ratio [RRR]=1.43, p<0.01). Unique features such as flavor appeared to encourage college students' experimentation with e-cigarettes (ps<0.05). Participants mentioned positive sensory experiences as a reason for e-cigarette use (ps<0.01) and reported caring about their appearance more than their health (ps<0.05) when asked about possible outcomes of e-cigarette use. Study findings indicate a possible explosive increase in e-cigarette experimentation or use among college students. Unique features of e-cigarettes such as flavor and USB rechargeability appear to be strong factors making e-cigarettes more acceptable and appealing to young adults regardless of their smoking status. Concerted efforts should be initiated to effectively counter or eliminate attractive features that lure young adults to experiment with e-cigarettes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Metalorganic chemical vapor deposition of AlGaAs and InGaP heterojunction bipolar transistors

NASA Astrophysics Data System (ADS)

Pan, N.; Welser, R. E.; Lutz, C. R.; DeLuca, P. M.; Han, B.; Hong, K.

2001-05-01

Heterojunction bipolar transistors (HBT) are now beginning to be widely incorporated as power amplifiers, laser drivers, multiplexers, clock data recovery circuits, as well as transimpedance and broadband amplifiers in high performance millimeter wave circuits (MMICs). The increasing acceptance of this device is principally due to advancements in metalorganic chemical vapor deposition (MOCVD), device processing, and circuit design technologies. Many of the DC electrical characteristics of large area devices can be directly correlated to the DC performance of small area RF devices. A precise understanding of the growth parameters and their relationship to device characteristics is critical for ensuring the high degree of reproducibility required for low cost high-yield volume manufacturing. Significant improvements in the understanding of the MOCVD growth process have been realized through the implementation of statistical process control on the key HBT device parameters. This tool has been successfully used to maintain the high quality of the device characteristics in high-volume production of 4″ GaAs-based HBTs. There is a growing demand to migrate towards 6″ diameter wafer size due to the potential cost reductions and increased volume production that can be realized. Preliminary results, indicating good heterostructure layer characteristics, demonstrate the feasibility of 6″ InGaP-based HBT devices.

7 CFR 42.143 - Operating Characteristic (OC) curves for on-line sampling and inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

...=Number of sample units in a subgroup. T=Subgroup tolerance.L=Acceptance limit.S=Starting value. EC02SE91... ng=Number of sample units in a subgroup. T=Subgroup tolerance. L=Acceptance limit. S=Starting value... of sample units in a subgroup. T=Subgroup tolerance. L=Acceptance limit. S=Starting value. EC02SE91...

Redesign of solid rocket booster/external tank attachment ring for the space transportation system

NASA Technical Reports Server (NTRS)

Mccomb, Harvey G., Jr. (Compiler)

1987-01-01

An improved design concept is presented for the Space Shuttle solid rocket booster (SRB)/external tank (ET) attachment ring structural component. This component picks up three struts which attach the aft end of each SRB to the ET. The concept is a partial ring with carefully tapered ends to distribute fastener loads safely into the SRB. Extensive design studies and analyses were performed to arrive at the concept. Experiments on structural elements were performed to determine material strength and stiffness characteristics. Materials and fabrication studies were conducted to determine acceptable tolerances for the design concept. An overview is provided of the work along with conclusions and major recommendations.

How Usability Testing Resulted in Improvements to Ground Collision Software for General Aviation: Improved Ground Collision Avoidance System (IGCAS)

NASA Technical Reports Server (NTRS)

Lamarr, Michael; Chinske, Chris; Williams, Ethan; Law, Cameron; Skoog, Mark; Sorokowski, Paul

2016-01-01

The NASA improved Ground Collision Avoidance System (iGCAS) team conducted an onsite usability study at Experimental Aircraft Association (EAA) Air Venture in Oshkosh, Wisconsin from July 19 through July 26, 2015. EAA Air Venture had approximately 550,000 attendees from which the sample pool of pilots were selected. The objectives of this study were to assess the overall appropriateness and acceptability of iGCAS as a warning system for General Aviation aircraft, usability of the iGCAS displays and audio cues, test terrain avoidance characteristics, performance, functionality, pilot response time, and correlate terrain avoidance performance and pilot response time data.

Evaluation of a near-infrared photomultiplier

NASA Technical Reports Server (NTRS)

Evans, W. E.

1978-01-01

A high performance near infrared sensitive photomultiplier tube was procured and evaluated with emphasis on those characteristics affecting its use over the very large amplitude range of signals encountered by an airborne lidar intended for mapping the distribution of stratospheric aerosols. A cathode quantum efficiency of 4.3 percent at 1.06 micrometer wavelength and a background count of less than 10,000 per second were realized. It is recommended that the tube be stored and operated at a temperature near -20 C, or cooler. Performance was found acceptable for the application in both pulse counting and analog modes, but careful design, probably including dynamic gain control, will be required to effectively utilize both modes on the same lidar shot.

30 CFR 7.44 - Technical requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... nonmetallic materials shall meet the acceptable performance criteria for the impact test in § 7.46... material under part 18 of this chapter; and (ii) Meet the acceptable performance criteria for the...) Battery box and cover insulating material shall meet the acceptable performance criteria for the acid...

30 CFR 7.44 - Technical requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... nonmetallic materials shall meet the acceptable performance criteria for the impact test in § 7.46... material under part 18 of this chapter; and (ii) Meet the acceptable performance criteria for the...) Battery box and cover insulating material shall meet the acceptable performance criteria for the acid...

Resource-constrained scheduling with hard due windows and rejection penalties

NASA Astrophysics Data System (ADS)

Garcia, Christopher

2016-09-01

This work studies a scheduling problem where each job must be either accepted and scheduled to complete within its specified due window, or rejected altogether. Each job has a certain processing time and contributes a certain profit if accepted or penalty cost if rejected. There is a set of renewable resources, and no resource limit can be exceeded at any time. Each job requires a certain amount of each resource when processed, and the objective is to maximize total profit. A mixed-integer programming formulation and three approximation algorithms are presented: a priority rule heuristic, an algorithm based on the metaheuristic for randomized priority search and an evolutionary algorithm. Computational experiments comparing these four solution methods were performed on a set of generated benchmark problems covering a wide range of problem characteristics. The evolutionary algorithm outperformed the other methods in most cases, often significantly, and never significantly underperformed any method.

Preliminary access routes and cost study analyses for seven potentially acceptable salt sites: Final report, October 1984

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-02-01

This report analyzes highway and railroad access to seven potentially acceptable salt repository sites: Richton Dome and Cypress Creek Dome in Mississippi, Vacherie Dome in Louisiana, Swisher County and Deaf Smith County in Texas, and Davis Canyon and Lavender Canyon in utah. The objectives of the study were to investigate the routing of reasonable access corridors to the sites, describe major characteristics of each route, and estimate the costs for constructing or upgrading highways and railroads. The routes used in the analysis are not necessarily recommended or preferred over other routes, nor do they represent an implied final selection. Detailedmore » engineering studies must be performed for the Davis Canyon and Lavender Canyon highway access before the analyzed routes can be considered to be viable. 20 refs., 7 figs., 3 tabs.« less

Estimating annual suspended-sediment loads in the northern and central Appalachian Coal region

USGS Publications Warehouse

Koltun, G.F.

1985-01-01

Multiple-regression equations were developed for estimating the annual suspended-sediment load, for a given year, from small to medium-sized basins in the northern and central parts of the Appalachian coal region. The regression analysis was performed with data for land use, basin characteristics, streamflow, rainfall, and suspended-sediment load for 15 sites in the region. Two variables, the maximum mean-daily discharge occurring within the year and the annual peak discharge, explained much of the variation in the annual suspended-sediment load. Separate equations were developed employing each of these discharge variables. Standard errors for both equations are relatively large, which suggests that future predictions will probably have a low level of precision. This level of precision, however, may be acceptable for certain purposes. It is therefore left to the user to asses whether the level of precision provided by these equations is acceptable for the intended application.

Supersonic investigation of two dimensional hypersonic exhaust nozzles

NASA Technical Reports Server (NTRS)

Carboni, Jeanne D.; Shyne, Rickey J.; Leavitt, Laurence D.; Taylor, John G.; Lamb, Milton

1992-01-01

An experimental investigation was conducted in the NASA Lewis 10 x 10 ft supersonic Wind Tunnel to determine the performance characteristics of 2D hypersonic exhaust nozzles/afterbodies at low supersonic conditions. Generally, this type of application requires a single expansion ramp nozzle (SERN) that is highly integrated with the airframe of the hypersonic vehicle. At design conditions (hypersonic speeds), the nozzle generally exhibits acceptable performance. At off-design conditions (transonic to mid-supersonic speeds), nozzle performance of a fixed geometry configuration is generally poor. Various 2-D nozzle configurations were tested at off-design conditions from Mach 2.0 to 3.5. Performance data is presented at nozzle pressure ratios from 1 to 35. Jet exhaust was simulated with high-pressure air. To study performance of different geometries, nozzle configurations were varied by interchanging the following model parts: internal upstream contour, expansion ramp, sidewalls, and cowl.

Numerical investigation of the variable nozzle effect on the mixed flow turbine performance characteristics

NASA Astrophysics Data System (ADS)

Meziri, B.; Hamel, M.; Hireche, O.; Hamidou, K.

2016-09-01

There are various matching ways between turbocharger and engine, the variable nozzle turbine is the most significant method. The turbine design must be economic with high efficiency and large capacity over a wide range of operational conditions. These design intents are used in order to decrease thermal load and improve thermal efficiency of the engine. This paper presents an original design method of a variable nozzle vane for mixed flow turbines developed from previous experimental and numerical studies. The new device is evaluated with a numerical simulation over a wide range of rotational speeds, pressure ratios, and different vane angles. The compressible turbulent steady flow is solved using the ANSYS CFX software. The numerical results agree well with experimental data in the nozzleless configuration. In the variable nozzle case, the results show that the turbine performance characteristics are well accepted in different open positions and improved significantly in low speed regime and at low pressure ratio.

Preliminary noise tradeoff study of a Mach 2.7 cruise aircraft

NASA Technical Reports Server (NTRS)

Mascitti, V. R.; Maglieri, D. J. (Editor); Raney, J. P. (Editor)

1979-01-01

NASA computer codes in the areas of preliminary sizing and enroute performance, takeoff and landing performance, aircraft noise prediction, and economics were used in a preliminary noise tradeoff study for a Mach 2.7 design supersonic cruise concept. Aerodynamic configuration data were based on wind-tunnel model tests and related analyses. Aircraft structural characteristics and weight were based on advanced structural design methodologies, assuming conventional titanium technology. The most advanced noise prediction techniques available were used, and aircraft operating costs were estimated using accepted industry methods. The 4-engines cycles included in the study were based on assumed 1985 technology levels. Propulsion data was provided by aircraft manufacturers. Additional empirical data is needed to define both noise reduction features and other operating characteristics of all engine cycles under study. Data on VCE design parameters, coannular nozzle inverted flow noise reduction and advanced mechanical suppressors are urgently needed to reduce the present uncertainties in studies of this type.

Personality characteristics and trait clusters in final stage astronaut selection.

PubMed

Musson, David M; Sandal, Gro M; Helmreich, Robert L

2004-04-01

This paper presents personality testing data from final stage applicants to the NASA astronaut program. Questions addressed include whether personality predicted final selection into the astronaut corps, whether women and men demonstrated typical gender differences in personality, and whether three characteristic clusters found in other high performance populations replicated in this group. Between 1989 and 1995, 259 final stage astronauts completed the Personal Characteristic Inventory (PCI) which assesses personality characteristics related to the broad traits of Instrumentality and Expressivity. In addition, 147 of these individuals also completed an abbreviated version of the NEO Five Factor Inventory (NEO-FFI) which assesses the "Big Five" traits of Neuroticism, Extraversion, Openness, Agreeableness, And Conscientiousness. Three previously identified trait clusters (Right, Wrong, and No Stuff) were found to replicate in this population. No differences were found on the PCI or on the modified NEO-FFI between applicants who were chosen to become astronauts (n = 63) and those who were not (n = 196). Men scored higher than women on competitiveness, but lower on expressivity and achievement strivings. These analyses suggest that the "Right Stuff," "Wrong Stuff" and "No Stuff" clusters originally described in airline pilots and other high performance groups also exist within this population. Consistent with findings from other high performance populations, men and women tend to differ to a lesser extent than found in the general population, particularly on traits related to achievement motivation. Personality trait testing did not predict which applicants were most likely to be accepted into the astronaut corps.

Outer planet Pioneer imaging communications system study. [data compression

NASA Technical Reports Server (NTRS)

1974-01-01

The effects of different types of imaging data compression on the elements of the Pioneer end-to-end data system were studied for three imaging transmission methods. These were: no data compression, moderate data compression, and the advanced imaging communications system. It is concluded that: (1) the value of data compression is inversely related to the downlink telemetry bit rate; (2) the rolling characteristics of the spacecraft limit the selection of data compression ratios; and (3) data compression might be used to perform acceptable outer planet mission at reduced downlink telemetry bit rates.

A predictive model of human performance.

NASA Technical Reports Server (NTRS)

Walters, R. F.; Carlson, L. D.

1971-01-01

An attempt is made to develop a model describing the overall responses of humans to exercise and environmental stresses for prediction of exhaustion vs an individual's physical characteristics. The principal components of the model are a steady state description of circulation and a dynamic description of thermal regulation. The circulatory portion of the system accepts changes in work load and oxygen pressure, while the thermal portion is influenced by external factors of ambient temperature, humidity and air movement, affecting skin blood flow. The operation of the model is discussed and its structural details are given.

Evaluation program for secondary spacecraft cells: Seventeenth annual report of cycle life test

NASA Technical Reports Server (NTRS)

Harkness, J. D.

1981-01-01

Acceptance tests were conducted on nickel cadmium, silver cadmium, and silver zinc cells to insure that all cells put into the life cycle program meet the specifications outlined in the respective purchase contracts. Statistical information is presented on cell performance characteristics and limitations. Weaknesses discovered in cell design are reported and aid in research and development efforts toward improving the reliability of space batteries. Battery weaknesses encountered in satellite programs such as IMP, NIMBUS, OGO, OAO, SAS, and TETR were studied and remedied through special tests.

Polymer matrix composites research at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Serafini, T. T.

1982-01-01

The in situ polymerization of monomer reactants (PMR) approach was demonstrated to be a powerful approach for solving many of the processing difficulties associated with the use of high temperature resistant polymers as matrix resins in high performance composites. The PMR-15 polyimide provides the best overall balance of processing characteristics and elevated temperature properties. The excellent properties and commercial availability of composite materials based on PMR-15 led to their acceptance as viable engineering materials. The PMR-15 composites are used to produce a variety of high quality structural components.

Sensory characteristics and consumer acceptability of decaffeinated green teas.

PubMed

Lee, S M; Lee, H-S; Kim, K-H; Kim, K-O

2009-04-01

Green tea has been widely consumed for its mild flavors and its health benefits, yet caffeine in green tea has been a limitation for those who want to avoid it. The limitation brought increase in need for decaffeinated products in the green tea market. Most of the conventional decaffeination techniques applied in food use organic solvents. However, supercritical carbon dioxide fluid extraction (SC-CO2) method is gaining its intension as one of the future decaffeination methods that overcomes the problems of conventional methods. The purpose of this study was to identify sensory characteristics of decaffeinated green teas applied with SC-CO2 method and to observe the relationship with consumer acceptability to elucidate the potentiality of applying SC-CO2 technique in decaffeinated green tea market. Descriptive analysis was performed on 8 samples: green teas containing 4 caffeine levels (10%, 35%, 60%, and 100%) infused at 2 infusing periods (1 or 2 min). It was found that the SC-CO2 process not only reduced caffeine but also decreased some important features of original tea flavors. Two groups were recruited for consumer acceptability test: one (GP I, N = 52), consuming all types of green teas including hot/cold canned teas; and the other (GP II, N = 40), only consuming the loose type. While GP II liked original green tea the most, GP I liked highly decaffeinated green teas. Although the SC-CO2 method had limitations of losing complex flavors of green teas, it appeared to have future potential in the decaffeinated green tea market within or without the addition of desirable flavors.

Chemical characteristics and volatile profile of genetically modified peanut cultivars.

PubMed

Ng, Ee Chin; Dunford, Nurhan T; Chenault, Kelly

2008-10-01

Genetic engineering has been used to modify peanut cultivars for improving agronomic performance and pest resistance. Food products developed through genetic engineering have to be assessed for their safety before approval for human consumption. Preservation of desirable chemical, flavor and aroma attributes of the peanut cultivars during the genetic modifications is critical for acceptance of genetically modified peanuts (GMP) by the food industry. Hence, the main objective of this study is to examine chemical characteristics and volatile profile of GMP. The genetically modified peanut cultivars, 188, 540 and 654 were obtained from the USDA-ARS in Stillwater, Oklahoma. The peanut variety Okrun was examined as a control. The volatile analysis was performed using a gas chromatograph/mass spectrometer (GC/MS) equipped with an olfactory detector. The peanut samples were also analyzed for their moisture, ash, protein, sugar and oil compositions. Experimental results showed that the variations in nutritional composition of peanut lines examined in this study were within the values reported for existing cultivars. There were minor differences in volatile profile among the samples. The implication of this study is significant, since it shows that peanut cultivars with greater pest and fungal resistance were successfully developed without major changes in their chemical characteristics.

[Super sweet corn hybrids adaptability for industrial processing. I freezing].

PubMed

Alfonzo, Braunnier; Camacho, Candelario; Ortiz de Bertorelli, Ligia; De Venanzi, Frank

2002-09-01

With the purpose of evaluating adaptability to the freezing process of super sweet corn sh2 hybrids Krispy King, Victor and 324, 100 cobs of each type were frozen at -18 degrees C. After 120 days of storage, their chemical, microbiological and sensorial characteristics were compared with a sweet corn su. Industrial quality of the process of freezing and length and number of rows in cobs were also determined. Results revealed yields above 60% in frozen corns. Length and number of rows in cobs were acceptable. Most of the chemical characteristics of super sweet hybrids were not different from the sweet corn assayed at the 5% significance level. Moisture content and soluble solids of hybrid Victor, as well as total sugars of hybrid 324 were statistically different. All sh2 corns had higher pH values. During freezing, soluble solids concentration, sugars and acids decreased whereas pH increased. Frozen cobs exhibited acceptable microbiological rank, with low activities of mesophiles and total coliforms, absence of psychrophiles and fecal coliforms, and an appreciable amount of molds. In conclusion, sh2 hybrids adapted with no problems to the freezing process, they had lower contents of soluble solids and higher contents of total sugars, which almost doubled the amount of su corn; flavor, texture, sweetness and appearance of kernels were also better. Hybrid Victor was preferred by the evaluating panel and had an outstanding performance due to its yield and sensorial characteristics.

Development of non-volatile semiconductor memory

NASA Technical Reports Server (NTRS)

Heikkila, W. W.

1979-01-01

A 256 word by 8-bit random access memory chip was developed utilizing p channel, metal gate metal-nitride-oxide-silicon (MNOS) technology; with operational characteristics of a 2.5 microsecond read cycle, a 6.0 microsecond write cycle, 800 milliwatts of power dissipation; and retention characteristics of 10 to the 8th power read cycles before data refresh and 5000 hours of no power retention. Design changes were implemented to reduce switching currents that caused parasitic bipolar transistors inherent in the MNOS structure to turn on. Final wafer runs exhibited acceptable yields for a die 250 mils on a side. Evaluation testing was performed on the device in order to determine the maturity of the device. A fixed gate breakdown mechanism was found when operated continuously at high temperature.

Effect of the Iberian pig line on dry-cured ham characteristics.

PubMed

Carrapiso, Ana I; García, Carmen

2008-10-01

The purpose of this study was to compare the characteristics (chemical composition, instrumental colour, sensory characteristics and acceptance) of dry-cured hams obtained form three genetic lines of Iberian pig (Censyra, Torbiscal and Entrepelado). The instrumental colour of fat was affected by the genetic line (b(∗), p=0.008; and h°, p=0.024), the Censyra group having the largest values. The genetic line did not affect the chemical composition of the subcutaneous fat and lean of the dry-cured hams or the instrumental colour of the lean. Data from a descriptive analysis showed that the only characteristic significantly affected was the toasted flavour (p=0.004), and juiciness and sweetness were slightly affected (p=0.062 and 0.061, respectively). In spite of the slight effect on the physical-chemical and sensory characteristics, acceptance was significantly different, Torbiscal hams having the highest scores.

Quantitative verification of thin-film polyvinylidene fluoride (PVDF) transducer array performance up to 60 °C

NASA Astrophysics Data System (ADS)

Hakoda, Christopher; Ren, Baiyang; Lissenden, Cliff J.; Rose, Joseph L.

2017-02-01

Thin-film PVDF (polyvinylidene fluoride) transducers are appealing as low cost, light weight, durable, and flexible sensors for structural health monitoring applications in aircraft structures. However, due to the relatively low Curie temperature of PVDF, there is a concern that it's performance will drop below acceptable levels during elevated-temperature operating conditions. To verify acceptable performance in these environmental operating conditions, temperature history data were collected between 23-60 °C. The effect of temperature on the thin-film PVDF was investigated and a temperature-independent damage feature was assessed. The temperature dependence of the signal's peak amplitude was investigated in both the time domain and the spectral domain to get two damage features. It was found that the measurement of the incident guided wave by the thin-film PVDF transducer had a temperature dependence that varied with frequency. A third damage feature, the mode ratio, was also calculated in the spectral domain with the goal of defining a damage feature that is temperature independent. A comparison of how well these damage features performed when used to identify a notch in an aluminum plate was made using receiver operating characteristic curves and their respective area under the curve values. This result demonstrated that a temperature-independent damage feature can be calculated, to some degree, by using a mode ratio between two modes of similar temperature dependence.

Peer-assessment of medical communication skills: the impact of students' personality, academic and social reputation on behavioural assessment.

PubMed

Hulsman, Robert L; Peters, Joline F; Fabriek, Marcel

2013-09-01

Peer-assessment of communication skills may contribute to mastery of assessment criteria. When students develop the capacity to judge their peers' performance, they might improve their capacity to examine their own clinical performance. In this study peer-assessment ratings are compared to teacher-assessment ratings. The aim of this paper is to explore the impact of personality and social reputation as source of bias in assessment of communication skills. Second year students were trained and assessed history taking communication skills. Peers rated the students' personality and academic and social reputation. Peer-assessment ratings were significantly correlated with teacher-ratings in a summative assessment of medical communication. Peers did not provide negative ratings on final scales but did provide negative ratings on subcategories. Peer- and teacher-assessments were both related to the students' personality and academic reputation. Peer-assessment cannot replace teacher-assessment if the assessment should result in high-stake decisions about students. Our data do not confirm the hypothesis that peers are overly biased by personality and reputation characteristics in peer-assessment of performance. Early introduction of peer-assessment in medical education would facilitate early acceptance of this mode of evaluation and would promote early on the habit of critical evaluation of professional clinical performance and acceptance of being evaluated critically by peers. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Determinants of acceptance of cervical cancer screening in Dar es Salaam, Tanzania.

PubMed

Kahesa, Crispin; Kjaer, Susanne; Mwaiselage, Julius; Ngoma, Twalib; Tersbol, Britt; Dartell, Myassa; Rasch, Vibeke

2012-12-19

To describe how demographic characteristics and knowledge of cervical cancer influence screening acceptance among women living in Dar es Salaam, Tanzania. Multistage cluster sampling was carried out in 45 randomly selected streets in Dar es Salaam. Women between the ages of 25-59 who lived in the sampled streets were invited to a cervical cancer screening; 804 women accepted and 313 rejected the invitation. Information on demographic characteristics and knowledge of cervical cancer were obtained through structured questionnaire interviews. Women aged 35-44 and women aged 45-59 had increased ORs of 3.52 and 7.09, respectively, for accepting screening. Increased accepting rates were also found among single women (OR 2.43) and among women who had attended primary or secondary school (ORs of 1.81 and 1.94). Women who had 0-2 children were also more prone to accept screening in comparison with women who had five or more children (OR 3.21). Finally, knowledge of cervical cancer and awareness of the existing screening program were also associated with increased acceptance rates (ORs of 5.90 and 4.20). There are identifiable subgroups where cervical cancer screening can be increased in Dar es Salaam. Special attention should be paid to women of low education and women of high parity. In addition, knowledge and awareness raising campaigns that goes hand in hand with culturally acceptable screening services will likely lead to an increased uptake of cervical cancer screening.

When is it OK to be drunk? Situational and cultural variations in the acceptability of visible intoxication in the UK and Norway.

PubMed

Fjær, Eivind Grip; Pedersen, Willy; von Soest, Tilmann; Gray, Paul

2016-03-01

Research on norms regulating drunken behaviour has tended to focus on differences between different countries and cultures rather than variations within them. Here, we examine whether there are: (i) situation-specific differences in the acceptability of visible intoxication among students in the UK and Norway; (ii) whether there are situation-specific and overall differences in this regard between the two countries; and finally (iii) to what degree possible differences reflect individual characteristics such as use of alcohol, perceived harm of alcohol consumption, and broader value orientation. Students at one British (n=473) and one Norwegian (n=472) university responded to a survey including a battery of questions assessing the acceptability of visible intoxication in different situations, such as with friends, with work colleagues, with family members, and situations where children are present. Data were also collected regarding alcohol consumption, perceived harms of alcohol consumption, and value orientation. Analyses of covariance were performed to assess patterns in the acceptability of visible intoxication across different situations, and the relative contributions of country, alcohol consumption, perceived harm of alcohol consumption and human values. In both countries, visible intoxication was rated as most acceptable in situations involving friends and colleagues. Students from both countries rated visible intoxication least acceptable in situations where children are present. However, both overall, and in situations where children or family members are present, acceptability of visible intoxication scores were higher in the UK than Norway. These differences persisted after control for other variables. The study demonstrates large situational variation in acceptability of drunken behaviour, pointing to a fine-meshed set of norms regulating alcohol use and drunken behaviour within the two cultures, with the UK standing out as a more alcohol-liberal culture than Norway. Such differences underline how norms regulating drunken behaviour are culturally constituted. Copyright © 2015 Elsevier B.V. All rights reserved.

Satiated with belongingness? Effects of acceptance, rejection, and task framing on self-regulatory performance.

PubMed

DeWall, C Nathan; Baumeister, Roy F; Vohs, Kathleen D

2008-12-01

Seven experiments showed that the effects of social acceptance and social exclusion on self-regulatory performance depend on the prospect of future acceptance. Excluded participants showed decrements in self-regulation, but these decrements were eliminated if the self-regulation task was ostensibly a diagnostic indicator of the ability to get along with others. No such improvement was found when the task was presented as diagnostic of good health. Accepted participants, in contrast, performed relatively poorly when the task was framed as a diagnostic indicator of interpersonally attractive traits. Furthermore, poor performance among accepted participants was not due to self-handicapping or overconfidence. Offering accepted participants a cash incentive for self-regulating eliminated the self-regulation deficits. These findings provide evidence that the need to belong fits standard motivational patterns: Thwarting the drive intensifies it, whereas satiating it leads to temporary reduction in drive. Accepted people are normally good at self-regulation but are unwilling to exert the effort to self-regulate if self-regulation means gaining the social acceptance they have already obtained.

Satiated with Belongingness? Effects of Acceptance, Rejection, and Task Framing on Self-Regulatory Performance

PubMed Central

DeWall, C. Nathan; Baumeister, Roy F.; Vohs, Kathleen D.

2008-01-01

Seven experiments showed that the effects of social acceptance and social exclusion on self-regulatory performance depend on the prospect of future acceptance. Excluded participants showed decrements in self-regulation, but these decrements were eliminated if the self-regulation task was ostensibly a diagnostic indicator of the ability to get along with others. No such improvement was found when the task was presented as diagnostic of good health. Accepted participants, in contrast, performed relatively poorly when the task was framed as a diagnostic indicator of interpersonally attractive traits. Furthermore, poor performance among accepted participants was not due to self-handicapping or overconfidence. Offering accepted participants a cash incentive for self-regulating eliminated the self-regulation deficits. These findings provide evidence that the need to belong fits standard motivational patterns: thwarting the drive intensifies it, whereas satiating it leads to temporary reduction in drive. Accepted people are normally good at self-regulation but are unwilling to exert the effort to self-regulate if self-regulation means gaining the social acceptance they have already obtained. PMID:19025289

Understanding and acceptability by Hispanic consumers of four front-of-pack food labels.

PubMed

De la Cruz-Góngora, Vanessa; Torres, Pilar; Contreras-Manzano, Alejandra; Jáuregui de la Mota, Alejandra; Mundo-Rosas, Verónica; Villalpando, Salvador; Rodríguez-Oliveros, Guadalupe

2017-03-07

Front-of-pack food labels (FOPL) can help consumers make healthy and informed food choices. FOPL are used in the food market but evaluations of their understanding and acceptability are scanty. This study aimed to explore the subjective understanding and acceptability of four FOPL among Hispanic consumers. A qualitative study was conducted in six States of Mexico, in 18 urban elementary schools. A purposive sample of 135 parents of fifth-grade children was selected. Four FOPL were assessed: Logos, Rating Stars, Guideline Daily Allowances (GDA's), and Multiple Traffic Lights (MTL). Trained interviewers performed 18 focus groups with the participants, using an interview guide. Participants were asked about their subjective understanding and acceptability of the FOPL, displaying 16 generic breakfast cereal boxes designed for this study (four for each FOPL), varying in their nutritional value. Afterwards, participants were asked to choose among the four cereal boxes the one to best communicate the product healthiness and their reasons for choice, proposals for improving the FOPL, and desirable characteristics for new FOPL. Finally, a socio-demographic questionnaire was applied. Thematic analysis of the transcriptions of the focus groups was performed, using Altlas.tiV5 software. Logos were perceived as easy to understand, highly acceptable, and useful for decision-making; institutional endorsement of Logos was related to greater confidence in the label. The GDA's were hard to understand considering the nutritional knowledge and time needed for interpretation. The Rating Stars were related to the quality in businesses rather than foods. The MTL were viewed as indicating the high/low content of specific nutrients, but the meaning of the amber color was not fully understood. Participants highlighted the need for a simple FOPL that allows easily identification of healthy products while considering food purchasing time limitations and interpretation of food portions. Logos with an institutional endorsement was the best understood and accepted FOPL, and the GDA's and Rating Stars were the least. Our findings provide valuable insights about Hispanic consumers´ perceptions regarding FOPL and to guide public health policy. Further studies are needed in populations with chronic diseases and diverse social contexts.

Impact of soybean aging conditions on tofu sensory characteristics and acceptance.

PubMed

Kamizake, Neide Kiyoko Kondo; Silva, Lilian Catarini Pereira; Prudencio, Sandra Helena

2018-02-01

Tofu from aged soybeans is of poor quality, mainly with respect to texture. Texture defects described in the literature are contradictory. No study has investigated all sensory properties simultaneously. The objective of the present study was to evaluate the effect of soybean aging conditions [natural: ambient temperature and RH, 18 months, and accelerated: 30 °C, 84% relative humidity (RH), 6 months] on all of the sensory characteristics and the acceptance of tofu. Texture and color were also evaluated via an instrumental method. The control condition was -20 °C and 47% RH. Coodetec 214 and BRS 267 cultivars were studied. The effect of soybean accelerated aging on tofu sensory characteristics and acceptance was more pronounced compared to the natural condition. The two cultivars had a similar behavior. Tofu control exhibited a light, uniform and bright color, cohesive appearance, sweet aroma and flavor, as well as a firm and elastic texture. Tofu made from both aged cultivars showed a gray color with dark spots, a rough appearance, fermented aroma, rancid flavor, an astringent and bitter taste, a fracturable texture and adherence to the oral cavity after chewing. These characteristics of tofu from aged soybeans implied a low acceptance by consumers. Tofu from natural and accelerated aged soybeans has sensory attributes of appearance, as well as aroma, flavor and damaged texture, that are unacceptable by consumers. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

The moderating effects of demographic and individual characteristics on nurses' acceptance of information systems: A canadian study.

PubMed

Ifinedo, Princely

2016-03-01

The purpose of this study was to educate on the moderating effects of demographic (i.e., educational level and age) and individual characteristics (i.e., years of nursing experience and computer knowledge) on nurses' acceptance of information systems (IS). The technology acceptance model (TAM) with its constituent variables such as perceived usefulness (PUSS) and perceived ease of use (PEOU) was the theoretical framework used for this study. A cross-sectional study was conducted in Nova Scotia, Canada. Usable data was collected from 197 registered nurses (RNs). Relevant hypotheses were formulated and the partial least squares (PLS) technique was used for data analysis. The results of the hypothesized relationships showed that education and computer knowledge have positive moderating effects on the influences of PEOU and PUSS on nurses' attitudes toward IS (ATTI). The factors of nurses' years of nursing experience and age did not yield meaningful results. ATTI impacted behavioral intentions to use IS, which positively impacted nurses' use of IS. The nurses sampled in the study have positive IS use behaviors. This study demonstrates that relevant demographic factors and individual characteristics, if incorporated into frameworks used for investigating nurses' acceptance of IS, could permit the emergence of useful insights for practitioners and researchers. Specifically, this study showed that nurses with higher educational attainments and more basic computer knowledge readily accept implemented IS at work. Hospital administrators benefit from insights such as the one presented in this study. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Developing Mental Toughness: Lessons from Paralympians.

PubMed

Powell, Alexander J; Myers, Tony D

2017-01-01

Mental toughness (MT) is a key psychological variable related to perseverance and success in performance domains. MT and its development has been explored across a range of contexts and across different sports, but no research to date has examined MT in relation to Paralympic athletes. We sought to understand the lived-experiences of mentally tough Paralympians, aiming to conceptualize MT in a Paralympic context and investigate its development. Ten Paralympic athletes were interviewed using in-depth, semi-structured interviews. The verbatim transcripts of the interviews served as the data for an interpretative phenomenological analysis. Three broad themes and several subthemes emerged in conceptualizing Paralympian MT: characteristics (determination, defiance, pragmatic, optimistic, resilient, self-belief and independence and autonomy), cognitions (normalization, sense of escape, non-acceptance of constraints, influence perception and connection) and cognitive strategies (rational thinking, goal setting, pain management and control). In understanding MT development, two broad themes and several subthemes emerged: formative experiences (challenge, classification, setbacks, critical incident, trauma and recovery, sustained commitment, development of mind-set and perspective during challenge, failure, and acceptance), and support and coping resources (social support and significant others, external shaping, social support, overcoming problems, social comparison and reflective practice). The findings suggest that Paralympians benefited from exposure to highly demanding situations in a supportive environment and this helped develop mentally tough characteristics and behaviors and individualized cognitive coping strategies. Our findings highlight the association between the adaptive development of personal characteristics by overcoming physical and mental setbacks over a sustained time period. Overall, the findings suggest that to develop mentally tough characteristics and behaviors, athletes in general could benefit from exposure to highly demanding situations in a supportive environment.

Developing Mental Toughness: Lessons from Paralympians

PubMed Central

Powell, Alexander J.; Myers, Tony D.

2017-01-01

Mental toughness (MT) is a key psychological variable related to perseverance and success in performance domains. MT and its development has been explored across a range of contexts and across different sports, but no research to date has examined MT in relation to Paralympic athletes. We sought to understand the lived-experiences of mentally tough Paralympians, aiming to conceptualize MT in a Paralympic context and investigate its development. Ten Paralympic athletes were interviewed using in-depth, semi-structured interviews. The verbatim transcripts of the interviews served as the data for an interpretative phenomenological analysis. Three broad themes and several subthemes emerged in conceptualizing Paralympian MT: characteristics (determination, defiance, pragmatic, optimistic, resilient, self-belief and independence and autonomy), cognitions (normalization, sense of escape, non-acceptance of constraints, influence perception and connection) and cognitive strategies (rational thinking, goal setting, pain management and control). In understanding MT development, two broad themes and several subthemes emerged: formative experiences (challenge, classification, setbacks, critical incident, trauma and recovery, sustained commitment, development of mind-set and perspective during challenge, failure, and acceptance), and support and coping resources (social support and significant others, external shaping, social support, overcoming problems, social comparison and reflective practice). The findings suggest that Paralympians benefited from exposure to highly demanding situations in a supportive environment and this helped develop mentally tough characteristics and behaviors and individualized cognitive coping strategies. Our findings highlight the association between the adaptive development of personal characteristics by overcoming physical and mental setbacks over a sustained time period. Overall, the findings suggest that to develop mentally tough characteristics and behaviors, athletes in general could benefit from exposure to highly demanding situations in a supportive environment. PMID:28824479

The Effects of Sequential Environmental and Harvest Stressors on the Sensory Characteristics of Cultured Channel Catfish (Ictalurus Punctatus) Fillets.

PubMed

Ciaramella, Michael A; Kim, Taejo; Avery, Jimmy L; Allen, Peter J; Schilling, M Wes

2016-08-01

Stress during fish culture alters physiological homeostasis and affects fillet quality. Maintenance of high-quality seafood is important to ensure the production of a marketable product. This study assessed how sequential stressors affect the sensory and quality characteristics of catfish (Ictalurus punctatus) fillets. Three stress trials were conducted where temperature (25 or 33 °C) and dissolved oxygen (DO, approximately 2.5 or >5 mg/L) were manipulated followed by socking and transport stress. After each stage of harvest (environmental stress, socking, and transport), fillet yield, consumer acceptability, descriptive evaluation, cook loss, tenderness, and pH were evaluated. Fillet yield decreased with increasing severity of environmental stress. Fillets from the severe stress treatment (33 °C, approximately 2.5 mg/L) received the highest acceptability scores (P < 0.05). Control fillets (25 °C, >5 mg/L) were the least acceptable (P < 0.05). Increased intensity of less favorable flavor attributes commonly associated with catfish resulted in the differences in acceptability among treatments. As fish progressed through the harvest event, cook loss decreased, tenderness increased, and pH increased, indicating that stress induced textural changes. The data suggest that although environmental stress results in slight changes in flavor attributes, its effects on acceptability are minor with fillets from all treatments still liked (>6 on a 9 point scale). Socking and transport were identified to positively affect textural characteristics of catfish fillets. Although the effects observed were not likely to negatively impact consumer acceptance, a strict management plan should be followed to maintain consistency in the product and avoid changes in stressors that might alter quality more drastically. © 2016 Institute of Food Technologists®

Self-efficacy and pain acceptance as mediators of the relationship between pain and performance of valued life activities in women and men with rheumatoid arthritis.

PubMed

Ahlstrand, Inger; Vaz, Sharmila; Falkmer, Torbjörn; Thyberg, Ingrid; Björk, Mathilda

2017-06-01

To study whether personal factors (self-efficacy and pain acceptance) mediate the relationship between pain and performance of valued life activities in persons with rheumatoid arthritis. Persons with rheumatoid arthritis for at least four years ( n = 737; 73% women) answered a questionnaire measuring self-efficacy, pain acceptance, performance of valued life activities, and self-rated pain. Relationships among these constructs were explored using univariate and multivariate analyses. Structural equation modelling was then used to examine the mediational role of personal factors on the relationship between pain and performance of valued life activities. A direct negative association between pain and performance of valued life activities was identified ( Beta = .34, P < .001). This suggests that people with rheumatoid arthritis who had higher levels of pain has increased difficulties in performing valued life activities. Self-efficacy and activity engagement component of pain acceptance mediated the relationship between pain and performance of valued life activities, however the pain willingness component of pain acceptance did not influence participation in valued life activities. These findings highlight the importance of considering personal factors, such as pain acceptance and self-efficacy, in facilitating participation in valued life activities.

Sensory characteristics and consumer acceptability of beef stock containing glutathione Maillard reaction products prepared at various conditions.

PubMed

Kwon, G Y; Hong, J H; Kim, Y S; Lee, S M; Kim, K O

2011-01-01

The sensory characteristics and consumer acceptability of beef soup samples containing 9 types of glutathione Maillard reaction products (GMRPs) were investigated to examine the effects of the GMRPs produced under different reaction conditions on the flavor of the beef soup. The sensory characteristics of the beef stocks were examined using descriptive analysis. In consumer testing, 50 consumers evaluated the overall acceptability and flavor intensities of beef odor, salty taste, beef flavor, and seasoning flavor in the beef soup samples. It was found that the reaction conditions, including sugar type and pH, affected the sensory characteristics of the beef stock containing the GMRPs. The samples containing the GMRPs reacted at pH 7 were characterized with strong beef flavor, chestnut flavor, and cooked rice flavor. However, the GMRP reacted with xylose at pH 7 (XM7) was significantly stronger in beef-related sensory characteristics than the GMRPs reacted with glucose or fructose at pH 7 (GM7 and FM7). The samples containing the GMRPs reacted at pH 3 had strong acid-related attributes whereas the GMRPs reacted at pH 11 exhibited strong sulfur-related attributes and a bitter taste. Overall, the beef soup containing XM7, which was perceived as having a strong beef odor and flavor, was rated the highest consumer acceptability score. This suggests that XM7 has feasibility as a flavor enhancer. To elucidate its effectiveness further, it is required to apply XM7 in various food systems at varying levels and to compare its flavor enhancing effects with other flavor enhancers such as monosodium L-glutamate in future studies. Practical Application: This study characterized sensory attributes of glutathione Maillard reaction products (GMRPs) reacted under various conditions and evaluated their potential as a flavor enhancer by examining consumer acceptability of beef stock containing the GMRPs. This study showed that the GMRP reacted with xylose at pH 7 had strong 71 beef flavor and the highest consumer acceptability score. The results of this study will provide valuable information for understanding sensory aspect of flavors generated by Maillard reaction of GSH and sugars, since most studies on Maillard reaction focused on chemical reactions. Also, the outcome of this study will help flavor and food industries' efforts to develop a new flavor enhancer for use in a variety of processed food products.

Influence of lactation stage and some flock management practices on sensory characteristics of goat milk from Brazilian Saanen breed.

PubMed

de Cássia Ramos do Egypto Queiroga, Rita; Costa, Roberto Germano; Madruga, Marta Suely; de Medeiros, Ariosvaldo Nunes; Dos Santos Garruti, Deborah; Magnani, Marciane; de Souza, Evandro Leite

2016-04-01

This study evaluated the influence of lactation stage (early, middle, late) and management practices (milking hygiene and buck presence) on the sensory attributes of Saanen goat milk. Goats were randomly divided in four groups in respect of different milking sanitary procedures and the presence/absence of the buck in the barn. Milk samples were analyzed for sensory attributes including quantitative descriptive analysis (QDA) and acceptance. The milking hygiene practice caused no significant influence on microbiological parameters. Results of QDA revealed that the buck presence increased the characteristic odor of milk at the middle and late lactation stages. The off-odor and off-flavor descriptors showed a distinct response since a higher intensity of these sensory characteristics was noted in the samples obtained from goats maintained without the buck. Odor and flavor contributed most in characterizing the different samples regardless of the management practice and lactation stage. The acceptance of odor showed to be influenced only by the lactation stage, while the acceptance of flavor was only through the presence of the buck. Odor acceptance correlated negatively to off-odor and off-flavor, suggesting that these two sensory attributes impaired the preference for the aroma of the milk samples. © 2015 Japanese Society of Animal Science.

Examining Acceptance of an Integrated Personal Health Record (PHR)

ERIC Educational Resources Information Center

Morton, Alicia A.

2011-01-01

Objective: The purpose of this project was to examine the practice question, "What are the factors influencing acceptance of integrated PHRs for self-care management among the Howard University Hospital (HUH) Diabetes Treatment Clinic (DTC) patients?" These factors include a) demographic characteristics, b) computer…

Predicting Peer Acceptance in Dutch Youth: A Multilevel Analysis

ERIC Educational Resources Information Center

Lubbers, Miranda; Van Der Werf, Margaretha; Kuyper, Hans; Offringa, G.

2006-01-01

This article uses an ecological approach to predict students' peer acceptance within junior high school classes. The authors investigate whether various characteristics (self-perception of physical attractiveness and athletic competence, cognitive ability, agreeableness, extraversion, age, parents education, number of siblings, siblings at same…

Sensory evaluation ratings and melting characteristics show that okra gum is an acceptable milk-fat ingredient substitute in chocolate frozen dairy dessert.

PubMed

Romanchik-Cerpovicz, Joelle E; Costantino, Amanda C; Gunn, Laura H

2006-04-01

Reducing dietary fat intake may lower the risk of developing coronary heart disease. This study examined the feasibility of substituting okra gum for 25%, 50%, 75%, or 100% milk fat in frozen chocolate dairy dessert. Fifty-six consumers evaluated the frozen dairy desserts using a hedonic scale. Consumers rated color, smell, texture, flavor, aftertaste, and overall acceptability characteristics of all products as acceptable. All ratings were similar among the products except for the aftertaste rating, which was significantly lower for chocolate frozen dairy dessert containing 100% milk-fat replacement with okra gum compared with the control (0% milk-fat replacement) (P<0.05). Whereas melting points of all products were similar, melting rates slowed significantly as milk-fat replacement with okra gum increased, suggesting that okra gum may increase the stability of frozen dairy desserts (P<0.05). Overall, this study shows that okra gum is an acceptable milk-fat ingredient substitute in chocolate frozen dairy dessert.

Determinants of students' willingness to accept a measles-mumps-rubella booster vaccination during a mumps outbreak: a cross-sectional study.

PubMed

Donkers, Hanna W; Hautvast, Jeannine L A; Akkermans, Reinier P; Swaan, Corien M; Ruijs, Wilhelmina L M; Hulscher, Marlies E J L

2015-06-20

Despite high vaccination coverage, a mumps outbreak that affected mainly vaccinated university students and their contacts took place in the Netherlands in the period 2009-2012. We presented university students with a hypothetical case in which we offered them a measles, mumps, and rubella (MMR) booster vaccination to control the mumps outbreak. The aim of this study was to get insight into the determinants of university students' willingness to accept this vaccination. A questionnaire containing 38 items was developed for the purpose of assessing students' willingness and the psychosocial and social demographic determinants influencing their willingness to accept an MMR booster vaccination. In addition, we explored how organisational characteristics influenced the willingness to be vaccinated. Data were collected at six Dutch universities; a total of 790 students from various faculties were invited to participate. This was a convenience sampling procedure. 687 university students participated (response rate 87.0%) and 60.4% of the participants said they would be willing accept the hypothetical MMR booster vaccination. The perceived seriousness of mumps (OR 6.1) was the most important predictor of willingness to accept vaccination. Students who expected the MMR vaccination to be effective and to prevent individual illness and who believed their own vaccination would help stop the epidemic were more likely to be willing than others. The students were more willing to accept vaccination when they perceived that the social norms of significant others and the government favoured vaccination. Organisational characteristics, such as offering vaccination cost free and offering it at the university site, increased students' willingness. During a mumps outbreak, university students were generally willing to accept a hypothetical MMR booster vaccination. Risk perception, outcome expectations, perceived social norms, and organisational characteristics should be taken into account in the planning of any vaccination campaign for university students during an outbreak of an infectious disease.

Characteristics of lip-mouth region in smiling position from 80 persons with acceptable faces and individual normal occlusions.

PubMed

Zhang, Jiangheng; Chen, Yangxi; Zhou, Xiukun

2002-09-01

The characteristics of lip-mouth region including the soft and hard tissues in smiling position with frontal fixed position photographic computer-aided analysis were studied. The subjects were 80 persons (40 male and 40 females, age range: 17 to approximately 25 years) with acceptable faces and individual normal occlusions. The subjects were asked to take maximum smiling position to accept photographic measurement with computer-aided analysis. The maximum smile line could be divided into 3 categories: low smile line (16.25%), average smile line (68.75%), and high smile line (15%). The method adopting maximum smiling position to study the lip-month region is reproducible and comparable. This study would be helpful to provide a quantitative reference for clinical investigation, diagnosis, treatment and efficacy appraisal.

Beef quality labels: A combination of sensory acceptance test, stated willingness to pay, and choice-based conjoint analysis.

PubMed

Meyerding, Stephan G H; Gentz, Maria; Altmann, Brianne; Meier-Dinkel, Lisa

2018-08-01

Consumer perspectives of beef quality are complex, leading to a market that is increasingly differentiating. Thus, ongoing monitoring and assessment of changes in consumer perspectives is essential to identify changing market conditions. Often only credence and search characteristics are evaluated in consumer studies; therefore the object of the present study is to examine consumer preferences and perceptions towards beef steaks, also including experience characteristics, using a mixed methods approach. For this reason, 55 consumers participated in an experiment in Germany, including a sensory acceptance test, stated willingness to pay, and choice-based conjoint analysis (CBCA). Different quality characteristics were included, but a focus on the quality labels of 'dry aged beef', 'Block House beef', and 'Angus beef' was predominant throughout the experiment with the results showing that quality labels significantly increased overall liking as well as the stated willingness to pay. Quality labels were also the one of the most important characteristics in the conjoint analysis, after origin and price. The results of all applied methods are comparable for the characteristic quality label. The combination of sensory acceptance test and CBCA were additionally able to evaluate all three kinds of beef quality characteristics, which could not be evaluated together only using a single method. This suggests that a mixture of methods should be used to gain better knowledge on the true behavior of beef consumers. Experience and credence characteristics, including beef quality labels, present opportunities for future research as well as the potential for determining product and market differentiation. Copyright © 2018 Elsevier Ltd. All rights reserved.

The effect of male teenage passengers on male teenage drivers: findings from a driving simulator study

PubMed Central

Ouimet, Marie Claude; Pradhan, Anuj K.; Simons-Morton, Bruce G.; Divekar, Gautam; Mehranian, Hasmik; Fisher, Donald L.

2014-01-01

Studies have shown that teenage drivers are less attentive, more frequently exhibit risky driving behavior, and have a higher fatal crash risk in the presence of peers. The effects of direct peer pressure and conversation on young drivers have been examined. Little is known about the impact on driving performance of the presence of a non-interacting passenger and subtle modes of peer influence, such as perceived social norms. The goal of this study was to examine if teenagers would engage in more risky driving practices and be less attentive in the presence of a passenger (vs. driving alone) as well as with a risk-accepting (vs. risk-averse) passenger. A confederate portrayed the passenger's characteristics mainly by his non-verbal attitude. The relationship between driver characteristics and driving behavior in the presence of a passenger was also examined. Thirty-six male participants aged 16-17 years old were randomly assigned to drive with a risk-accepting or risk-averse passenger. Main outcomes included speed, headway, gap acceptance, eye glances at hazards, and horizontal eye movement. Driver characteristics such as tolerance of deviance, susceptibility to peer pressure, and self-esteem were measured. Compared to solo driving, the presence of a passenger was associated with significantly fewer eye glances at hazards and a trend for fewer horizontal eye movements. Contrary to the hypothesis, however, passenger presence was associated with a greater number of vehicles before initiating a left turn. Results also showed, contrary to the hypothesis, that participants with the risk-accepting passenger maintained significantly longer headway with the lead vehicle and engaged in more eye glances at hazards than participants with the risk-averse passenger. Finally, when driving with the passenger, earlier initiation of a left turn in a steady stream of oncoming vehicles was significantly associated with higher tolerance of deviance and susceptibility to peer pressure, while fewer eye glances at hazards was linked to lower self-esteem. While the results of this study were mixed, they suggest that the presence of a teenage passenger can affect some aspects of teenage driver behavior even in the absence of overt pressure and distraction. Results are discussed in relation to theoretical concepts of social influence and social facilitation models. PMID:23727554

Effect of broadened-specification fuels on aircraft engines and fuel systems

NASA Technical Reports Server (NTRS)

Rudey, R. A.

1979-01-01

A wide variety of studies on the potential effects of broadened-specification fuels on future aircraft engines and fuel systems are summarized. The compositions and characteristics of aircraft fuels that may be derived from current and future crude-oil sources are described, and the most critical properties that may effect aircraft engines and fuel systems are identified and discussed. The problems that are most likely to be encountered because of changes in selected fuel properties are explored; and the related effects on engine performance, component durability and maintenance, and aircraft fuel-system performance are examined. The ability of current technology to accept possible future fuel specification changes is assessed and selected technological advances that can reduce the severity of the potential problems are illustrated.

Effect of broadened-specification fuels on aircraft engines and fuel systems

NASA Technical Reports Server (NTRS)

Rudey, R. A.

1979-01-01

A wide variety of studies on the potential effects of broadened-specification fuels on future aircraft engines and fuel systems are summarized. The compositions and characteristics of aircraft fuels that may be derived from current and future crude-oil sources are described, and the most critical properties that may affect aircraft engines and fuel systems are identified and discussed. The problems that are most likely to be encountered because of changes in selected fuel properties are described; and the related effects on engine performance, component durability and maintenance, and aircraft fuel-system performance are discussed. The ability of current technology to accept possible future fuel-specification changes is discussed, and selected technological advances that can reduce the severity of the potential problems are illustrated.

Study of solid rocket motor for space shuttle booster, volume 2, book 5, appendices E thru H

NASA Technical Reports Server (NTRS)

1972-01-01

Preliminary parametric studies were performed to establish size, weight and packaging arrangements for aerodynamic decelerator devices that could be used for recovery of the expended solid propellant rocket motors used in the launch phase of the Space Shuttle System. Computations were made using standard engineering analysis techniques. Terminal stage parachutes were sized to provide equilibrium descent velocities for water entry that are presently thought to be acceptable without developing loads that could exceed the boosters structural integrity. The performance characteristics of the aerodynamic parachute decelerator devices considered are based on analysis and prior test results for similar configurations and are assumed to be maintained at the scale requirements of the present problem.

GEOSAT Follow-On (GFO) Altimeter Document Series, Volume 9. GFO and JASON Altimeter Engineering Assessment Report Update: GFO-Acceptance to December 18, 2006, JASON-Acceptance to December 24, 2006. Version 1: June 2007

NASA Technical Reports Server (NTRS)

Hayne, G. S.; Hancock, D. W., III; Brooks, R. L.

2007-01-01

The initial GFO Altimeter Engineering Assessment Report, March 2001 (NASA/TM-2001-209984/Ver.1/Vol.1) covered the GFO performance from Launch to Acceptance (10 February 1998 to 29 November 2000). The second of the series covered the performance from Acceptance to the end of Cycle 20 (29 November 2000 to 21 November 2001). The third of the series covered the performance from Acceptance to the end of Cycle 42 (29 November 2000 to 30 November 2002). The fourth of the series covered the performance from Acceptance to the end of Cycle 64 (29 November 2000 to 17 December 2003). The fifth of the series covered performance from Acceptance to the end of Cycle 86 (29 November 2000 to 17 December 2004). The sixth of the series covered performance from Acceptance to the end of Cycle 109 (29 November 2000 to 26 December 2005). In this year's GFO report, we have begun the inclusion of analyses of the JASON altimeter. In past years, JASON and TOPEX were compared during our assessment of the TOPEX altimeter; however, with the end of the TOPEX mission, we have developed methods to report on JASON as it relates to GFO. We see no change trend between the three altimeters and conclude all three are stable based on our cross comparison analyses.

Working towards accreditation by the International Standards Organization 15189 Standard: how to validate an in-house developed method an example of lead determination in whole blood by electrothermal atomic absorption spectrometry.

PubMed

Garcia Hejl, Carine; Ramirez, Jose Manuel; Vest, Philippe; Chianea, Denis; Renard, Christophe

2014-09-01

Laboratories working towards accreditation by the International Standards Organization (ISO) 15189 standard are required to demonstrate the validity of their analytical methods. The different guidelines set by various accreditation organizations make it difficult to provide objective evidence that an in-house method is fit for the intended purpose. Besides, the required performance characteristics tests and acceptance criteria are not always detailed. The laboratory must choose the most suitable validation protocol and set the acceptance criteria. Therefore, we propose a validation protocol to evaluate the performance of an in-house method. As an example, we validated the process for the detection and quantification of lead in whole blood by electrothermal absorption spectrometry. The fundamental parameters tested were, selectivity, calibration model, precision, accuracy (and uncertainty of measurement), contamination, stability of the sample, reference interval, and analytical interference. We have developed a protocol that has been applied successfully to quantify lead in whole blood by electrothermal atomic absorption spectrometry (ETAAS). In particular, our method is selective, linear, accurate, and precise, making it suitable for use in routine diagnostics.

Wind-tunnel development of an SR-71 aerospike rocket flight test configuration

NASA Technical Reports Server (NTRS)

Smith, Stephen C.; Shirakata, Norm; Moes, Timothy R.; Cobleigh, Brent R.; Conners, Timothy H.

1996-01-01

A flight experiment has been proposed to investigate the performance of an aerospike rocket motor installed in a lifting body configuration. An SR-71 airplane would be used to carry the aerospike configuration to the desired flight test conditions. Wind-tunnel tests were completed on a 4-percent scale SR-71 airplane with the aerospike pod mounted in various locations on the upper fuselage. Testing was accomplished using sting and blade mounts from Mach 0.6 to Mach 3.2. Initial test objectives included assessing transonic drag and supersonic lateral-directional stability and control. During these tests, flight simulations were run with wind-tunnel data to assess the acceptability of the configurations. Early testing demonstrated that the initial configuration with the aerospike pod near the SR-71 center of gravity was unsuitable because of large nosedown pitching moments at transonic speeds. The excessive trim drag resulting from accommodating this pitching moment far exceeded the excess thrust capability of the airplane. Wind-tunnel testing continued in an attempt to find a configuration suitable for flight test. Multiple configurations were tested. Results indicate that an aft-mounted model configuration possessed acceptable performance, stability, and control characteristics.

Towards standardized assessment of endoscope optical performance: geometric distortion

NASA Astrophysics Data System (ADS)

Wang, Quanzeng; Desai, Viraj N.; Ngo, Ying Z.; Cheng, Wei-Chung; Pfefer, Joshua

2013-12-01

Technological advances in endoscopes, such as capsule, ultrathin and disposable devices, promise significant improvements in safety, clinical effectiveness and patient acceptance. Unfortunately, the industry lacks test methods for preclinical evaluation of key optical performance characteristics (OPCs) of endoscopic devices that are quantitative, objective and well-validated. As a result, it is difficult for researchers and developers to compare image quality and evaluate equivalence to, or improvement upon, prior technologies. While endoscope OPCs include resolution, field of view, and depth of field, among others, our focus in this paper is geometric image distortion. We reviewed specific test methods for distortion and then developed an objective, quantitative test method based on well-defined experimental and data processing steps to evaluate radial distortion in the full field of view of an endoscopic imaging system. Our measurements and analyses showed that a second-degree polynomial equation could well describe the radial distortion curve of a traditional endoscope. The distortion evaluation method was effective for correcting the image and can be used to explain other widely accepted evaluation methods such as picture height distortion. Development of consensus standards based on promising test methods for image quality assessment, such as the method studied here, will facilitate clinical implementation of innovative endoscopic devices.

EVALUATION OF PERSONAL COOLING DEVICES FOR A ...

EPA Pesticide Factsheets

The study investigated the use of personal coolers to increase worker productivity and safety while working at elevated, ambient temperatures cleaning up dioxin contaminated soil.^The study included laboratory tests to measure the thermal characteristics of the chemical protective clothing worn and the performance of ice vest and vortex personal coolers.^In addition, field tests were conducted at a dioxin clean-up site to evaluate the performance of these two types of personal coolers.^The use of personal coolers was found to be an effective method of reducing the risk of heat stress.^In addition, workers were able to work continuously in hot weather without following the procedure normally used to decrease heat stress, i.e., working one hour followed by one hour of resting.^Both types of personal coolers were acceptable for the task being performed. information

Emperical Tests of Acceptance Sampling Plans

NASA Technical Reports Server (NTRS)

White, K. Preston, Jr.; Johnson, Kenneth L.

2012-01-01

Acceptance sampling is a quality control procedure applied as an alternative to 100% inspection. A random sample of items is drawn from a lot to determine the fraction of items which have a required quality characteristic. Both the number of items to be inspected and the criterion for determining conformance of the lot to the requirement are given by an appropriate sampling plan with specified risks of Type I and Type II sampling errors. In this paper, we present the results of empirical tests of the accuracy of selected sampling plans reported in the literature. These plans are for measureable quality characteristics which are known have either binomial, exponential, normal, gamma, Weibull, inverse Gaussian, or Poisson distributions. In the main, results support the accepted wisdom that variables acceptance plans are superior to attributes (binomial) acceptance plans, in the sense that these provide comparable protection against risks at reduced sampling cost. For the Gaussian and Weibull plans, however, there are ranges of the shape parameters for which the required sample sizes are in fact larger than the corresponding attributes plans, dramatically so for instances of large skew. Tests further confirm that the published inverse-Gaussian (IG) plan is flawed, as reported by White and Johnson (2011).

Clinical epidemiology of eosinophilic pustular folliculitis: results from a nationwide survey in Japan.

PubMed

Yamamoto, Yosuke; Nomura, Takashi; Kabashima, Kenji; Miyachi, Yoshiki

2015-01-01

No epidemiological study has examined the clinical characteristics, including medication use, of patients with eosinophilic pustular folliculitis (EPF). To describe the clinical characteristics for EPF and to examine the factors associated with the effectiveness of oral indomethacin for EPF. A cross-sectional study was performed of patients with EPF who visited the dermatology departments of the 67 main teaching facilities in Japan. We documented the patient characteristics and examined factors associated with the effectiveness of oral indomethacin. A total of 145 patients with EPF were enrolled; 62.8% were prescribed oral indomethacin. A multivariable analysis revealed that female patients were more likely to exhibit complete response to oral indomethacin after adjustment for confounders (adjusted proportion ratio = 1.93, p = 0.04). Oral indomethacin has been accepted as a first-line treatment in EPF. Our results suggest that there is a sex difference in the treatment response to oral indomethacin. © 2014 S. Karger AG, Basel.

CFD modeling using PDF approach for investigating the flame length in rotary kilns

NASA Astrophysics Data System (ADS)

Elattar, H. F.; Specht, E.; Fouda, A.; Bin-Mahfouz, Abdullah S.

2016-12-01

Numerical simulations using computational fluid dynamics (CFD) are performed to investigate the flame length characteristics in rotary kilns using probability density function (PDF) approach. A commercial CFD package (ANSYS-Fluent) is employed for this objective. A 2-D axisymmetric model is applied to study the effect of both operating and geometric parameters of rotary kiln on the characteristics of the flame length. Three types of gaseous fuel are used in the present work; methane (CH4), carbon monoxide (CO) and biogas (50 % CH4 + 50 % CO2). Preliminary comparison study of 2-D modeling outputs of free jet flames with available experimental data is carried out to choose and validate the proper turbulence model for the present numerical simulations. The results showed that the excess air number, diameter of kiln air entrance, radiation modeling consideration and fuel type have remarkable effects on the flame length characteristics. Numerical correlations for the rotary kiln flame length are presented in terms of the studied kiln operating and geometric parameters within acceptable error.

Hardwall acoustical characteristics and measurement capabilities of the NASA Lewis 9 x 15 foot low speed wind tunnel

NASA Technical Reports Server (NTRS)

Rentz, P. E.

1976-01-01

Experimental evaluations of the acoustical characteristics and source sound power and directionality measurement capabilities of the NASA Lewis 9 x 15 foot low speed wind tunnel in the untreated or hardwall configuration were performed. The results indicate that source sound power estimates can be made using only settling chamber sound pressure measurements. The accuracy of these estimates, expressed as one standard deviation, can be improved from + or - 4 db to + or - 1 db if sound pressure measurements in the preparation room and diffuser are also used and source directivity information is utilized. A simple procedure is presented. Acceptably accurate measurements of source direct field acoustic radiation were found to be limited by the test section reverberant characteristics to 3.0 feet for omni-directional and highly directional sources. Wind-on noise measurements in the test section, settling chamber and preparation room were found to depend on the sixth power of tunnel velocity. The levels were compared with various analytic models. Results are presented and discussed.

Feasibility Testing of an Emergency Department Screening Tool To Identify Older Adults Appropriate for Palliative Care Consultation.

PubMed

Ouchi, Kei; Block, Susan D; Schonberg, Mara A; Jamieson, Emily S; Aaronson, Emily L; Pallin, Daniel J; Tulsky, James A; Schuur, Jeremiah D

2017-01-01

Seriously ill older adults in the emergency department (ED) may benefit from palliative care referral, yet little is known about how to identify these patients. To assess the performance and determine the acceptability of a content-validated palliative care screening tool. We surveyed Emergency Medicine (EM) attending physicians at the end of their shifts using the screening tool and asked them to retrospectively apply it to all patients ≥65 years whom they had cared for. We conducted the survey for three consecutive weeks in October 2015. EM attending physicians at an urban, university-affiliated ED. Patient characteristics, acceptability rating, and time per patient screened. We approached 38 attending physicians to apply the screening tool for 69 eligible shifts. Physicians agreed to participate during 55 shifts (80%) and screened 207 patients. On 14 shifts (20%), physicians declined to participate. Mean age of the screened patients was 75 years, 51% were male, and 45% had at least one life-limiting illness. Overall, 67 patients (32%) screened positive for palliative care needs. Seventy percent of physicians (n = 33) found the screening tool acceptable to use and the average time of completion was 1.8 minutes per patient screened. A rapid screen of older adults for palliative care needs was acceptable to a majority of EM physicians and identified a significant number of patients who may benefit from palliative care referral. Further research is needed to improve acceptability and determine the appropriate care pathway for patients with palliative care needs.

An Evaluation of Performance Characteristics of Primary Display Devices.

PubMed

Ekpo, Ernest U; McEntee, Mark F

2016-04-01

The aim of this study was to complete a full evaluation of the new EIZO RX850 liquid crystal display and compare it to two currently used medical displays in Australia (EIZO GS510 and Barco MDCG 5121). The American Association of Physicists in Medicine (AAPM) Task Group 18 Quality Control test pattern was used to assess the performance of three high-resolution primary medical displays: EIZO RX850, EIZO GS510, and Barco MDCG 5121. A Konica Minolta spectroradiometer (CS-2000) was used to assess luminance response, non-uniformity, veiling glare, and color uniformity. Qualitative evaluation of noise was also performed. Seven breast lesions were displayed on each monitor and photographed with a calibrated 5.5-MP Olympus E-1 digital SLR camera. ImageJ software was used to sample pixel information from each lesion and surrounding background to calculate their conspicuity index on each of the displays. All monitor fulfilled all AAPM acceptance criteria. The performance characteristics for EIZO RX850, Barco MDCG 5121, and EIZO GS510 respectively were as follows: maximum luminance (490, 500.5, and 413 cd/m(2)), minimum luminance (0.724, 1.170, and 0.92 cd/m(2)), contrast ratio (675:1, 428:1, 449:1), just-noticeable difference index (635, 622, 609), non-uniformity (20, 5.92, and 8.5 %), veiling glare (GR = 2465.6, 720.4, 1249.8), and color uniformity (Δu'v' = +0.003, +0.002, +0.002). All monitors demonstrated low noise levels. The conspicuity index (χ) of the lesions was slightly higher in the EIZO RX850 display. All medical displays fulfilled AAPM performance criteria, and performance characteristics of EIZO RX850 are equal to or better than those of the Barco MDCG 5121 and EIZO GS510 displays.

Adolescents and their parents' perceptions about parenting characteristics. Who can better predict the adolescent's academic competence?

PubMed

Pelegrina, Santiago; García-Linares, M Cruz; Casanova, Pedro F

2003-12-01

This study examined family factors reported by parents and their children in relation to children's academic competence. Adolescents and their parents (N=323) reported about the same family characteristics: parental acceptance and involvement in the children's education. Measures related to children's academic competence were: academic competence rated by the teacher, self-reported grades, perceived academic competence and motivational orientation. The results revealed low interrater agreement in family measures. Moreover, ratings by children about parenting characteristics seem higher than those of their parents in predicting academic-related measures. This was true especially in the case of children's reports on acceptance. However, in the case of involvement, parent's reports contributed towards predicting a higher number of variables.

OTM Machine Acceptance: In the Arab Culture

NASA Astrophysics Data System (ADS)

Rashed, Abdullah; Santos, Henrique

Basically, neglecting the human factor is one of the main reasons for system failures or for technology rejection, even when important technologies are considered. Biometrics mostly have the characteristics needed for effortless acceptance, such as easiness and usefulness, that are essential pillars of acceptance models such as TAM (technology acceptance model). However, it should be investigated. Many studies have been carried out to research the issues of technology acceptance in different cultures, especially the western culture. Arabic culture lacks these types of studies with few publications in this field. This paper introduces a new biometric interface for ATM machines. This interface depends on a promising biometrics which is odour. To discover the acceptance of this biometrics, we distributed a questionnaire via a web site and called for participation in the Arab Area and found that most respondents would accept to use odour.

Noise Reduction Through Circulation Control

NASA Technical Reports Server (NTRS)

Munro, Scott E.; Ahuja, K. K.; Englar, Robert J.

2005-01-01

Circulation control technology uses tangential blowing around a rounded trailing edge or a leading edge to change the force and moment characteristics of an aerodynamic body. This technology has been applied to circular cylinders, wings, helicopter rotors, and even to automobiles for improved aerodynamic performance. Only limited research has been conducted on the acoustic of this technology. Since wing flaps contribute to the environmental noise of an aircraft, an alternate blown high lift system without complex mechanical flaps could prove beneficial in reducing the noise of an approaching aircraft. Thus, in this study, a direct comparison of the acoustic characteristics of high lift systems employing a circulation control wing configuration and a conventional wing flapped configuration has been made. These results indicate that acoustically, a circulation control wing high lift system could be considerably more acceptable than a wing with conventional mechanical flaps.

Factors Affecting the Acceptability of Microforms as a Reading Medium.

ERIC Educational Resources Information Center

Spencer, Herbert; Reynolds, Linda

Based on visits to representative microform users and an extensive survey of relevant literature, a study was undertaken to assess the relative importance of factors affecting the acceptability of microforms as reading mediums. The following variables were considered: (1) microform characteristics; (2) equipment design; (3) work station design;…

Cultivar preference and sensory evaluation of vegetable pigeon pea (Cajanus cajan) in Eastern Kenya

USDA-ARS?s Scientific Manuscript database

Preference and acceptability of twelve vegetable pigeon pea genotypes of medium maturity was evaluated in Eastern Kenya based on six seed cultivar parameters of color, appearance, taste, odor, tenderness and overall seed acceptability. The sensory characteristics were scored by consumers and farmers...

Thermoplastic Explosive Compositions on the Base of Hexanitrohexaazaisowurtzitane

NASA Astrophysics Data System (ADS)

Ilyin, V. P.; Smirnov, S. P.; Kolganov, E. V.; Pechenev, Yu. G.

2006-08-01

Hexanitrohexaazaisowurtzitane is an azostructural compound known as CL-20. We performed a series of experiments with CL-20 synthesized in Russia to evaluate the possibility to use it in pressed high explosive compositions. We used it in thermoplastic compositions both with an inert binder and energetic binder. The compositions were conventionally named CL-20И and CL-20A. It was determined that the thermoplastic compositions had the most high detonation parameters and a level of sensitivity to mechanical effects acceptable to allow their processing. Their detonation characteristics were compared with that of some known foreign compositions based on CL-20.

Effect of Background Pressure on the Plasma Oscillation Characteristics of the HiVHAc Hall Thruster

NASA Technical Reports Server (NTRS)

Huang, Wensheng; Kamhawi, Hani; Lobbia, Robert B.; Brown, Daniel L.

2014-01-01

During a component compatibility test of the NASA HiVHAc Hall thruster, a high-speed camera and a set of high-speed Langmuir probes were implemented to study the effect of varying facility background pressure on thruster operation. The results show a rise in the oscillation frequency of the breathing mode with rising background pressure, which is hypothesized to be due to a shortening accelerationionization zone. An attempt is made to apply a simplified ingestion model to the data. The combined results are used to estimate the maximum acceptable background pressure for performance and wear testing.

Experience and Assessment of the DOE/NASA Mod-1 2000 Kw Wind Turbine Generator at Boone, North Carolina

NASA Technical Reports Server (NTRS)

Collins, J. L.; Shaltens, R. K.; Poor, R. H.; Barton, R. S.

1982-01-01

The Mod 1 program objectives are defined. The Mod 1 wind turbine is described. In addition to the steel blade operated on the wind turbine, a composite blade was designed and manufactured. During the early phase of the manufacturing cycle of Mod 1A configuration was designed that identified concepts such as partial span control, a soft tower, and upwind teetered rotors that were incorporated in second and third generation industry designs. The Mod 1 electrical system performed as designed, with voltage flicker characteristics within acceptable utility limits.

Scramjet integration on hypersonic research airplane concepts

NASA Technical Reports Server (NTRS)

Weidner, J. P.; Small, W. J.; Penland, J. A.

1976-01-01

Several rocket-boosted research airplane concepts were evaluated with a research scramjet engine to determine their potential to provide research on critical aspects of airframe-integrated hypersonic systems. Extensive calculations to determine the force and moment contributions of the scramjet inlet, combustor, nozzle, and airframe were conducted to evaluate the overall performance of the combined engine/airframe system at hypersonic speeds. Results of both wind-tunnel tests and analysis indicate that it is possible to develop a research airplane configuration that will cruise at hypersonic speed on scramjet power alone, and will also have acceptable low-speed aerodynamic characteristics for landing.

A semi-active damper in vertical secondary suspension for the comfort increase in passenger trains

NASA Astrophysics Data System (ADS)

Ripamonti, Francesco; Chiarabaglio, Andrea; Resta, Ferruccio

2017-04-01

Passive oil dampers for railway vehicles present a damping and stiffness characteristics, which depend from excitation history. This behaviour is not acceptable for many high-performance applications. A mechatronic approach, able to continuously adjust the damping coefficient according to the operation requirements, represents a very attractive and smart solution. In this paper, a control strategy for semi-active dampers of train vertical secondary suspensions is presented. The controller aims at assuring the maximum available damping at low frequencies, while at high frequencies minimizes the force transmitted to the carbody that excites the bending modes.

[Pharmaceutical logistic in turnover of pharmaceutical products of Azerbaijan].

PubMed

Dzhalilova, K I

2009-11-01

Development of pharmaceutical logistic system model promotes optimal strategy for pharmaceutical functioning. The goal of such systems is organization of pharmaceutical product's turnover in required quantity and assortment, at preset time and place, at a highest possible degree of consumption readiness with minimal expenses and qualitative service. Organization of the optimal turnover chain in the region is offered to start from approximate classification of medicaments by logistic characteristics. Supplier selection was performed by evaluation of timeliness of delivery, quality of delivered products (according to the minimum acceptable level of quality) and time-keeping of time spending for orders delivery.

Effect of salmon type and presence/absence of bone on color, sensory characteristics, and consumer acceptability of pureed and chunked infant food products.

PubMed

DeSantos, F A; Ramamoorthi, L; Bechtel, P; Smiley, S; Brewer, M S

2010-08-01

Salmon-based infant food (puree) and toddler food (puree plus chunks) were manufactured from pink salmon, with and without bone, and from Sockeye salmon, with and without bone, to contain 45% salmon, 55% water, and 5% starch. Products were retort processed at 118 to 121 degrees C for 55 min in a steam-jacketed still retort. A trained descriptive panel (n = 7) evaluated infant and toddler foods separately. Instrumental color, pH, and water activity were also determined. Infant and toddler foods were also evaluated by a consumer panel (n = 104) of parents for product acceptability. During the manufacturing process (cooking, homogenization, retort processing), salmon infant food from pink salmon lost much of its characteristic pink color while that from sockeye salmon retained a greater amount. Bitterness was more evident in samples with bones. In the toddler food formulation containing chunks, the odor and flavor characteristics were influenced primarily by the type of salmon. The presence of bone affected visual pink color and lightness, and salmon odor only. Consumers scored products made with sockeye salmon as more acceptable despite the fact that they had more off-flavor than products from pink salmon. The appearance and thickness of the pureed infant food was more acceptable than the toddler food with chunks despite the chunky toddler product having more acceptable salmon flavor. This indicates that the color and appearance of the prototypes were the main drivers for liking. Of the total number of parents surveyed, 73% would feed this salmon product to their children.

Virtual reality exposure-based therapy for the treatment of post-traumatic stress disorder: a review of its efficacy, the adequacy of the treatment protocol, and its acceptability

PubMed Central

Botella, Cristina; Serrano, Berenice; Baños, Rosa M; Garcia-Palacios, Azucena

2015-01-01

Introduction The essential feature of post-traumatic stress disorder (PTSD) is the development of characteristic symptoms following exposure to one or more traumatic events. According to evidence-based intervention guidelines and empirical evidence, one of the most extensively researched and validated treatments for PTSD is prolonged exposure to traumatic events; however, exposure therapy can present some limitations. Virtual reality (VR) can help to improve prolonged exposure because it creates fictitious, safe, and controllable situations that can enhance emotional engagement and acceptance. Objective In addition to carrying out a review to evaluate the efficacy of VR exposure-based therapy (VR-EBT) for the treatment of PTSD, the aim of this study was to contribute to analyzing the use of VR-EBT by: first, evaluating the adequacy of psychological treatment protocols that use VR-EBT to treat PTSD; and second, analyzing the acceptability of VR-EBT. Method We performed a replica search with descriptors and databases used in two previous reviews and updated to April 2015. Next, we carried out an evaluation of the efficacy, adequacy, and acceptability of VR-EBT protocols. Results Results showed that VR-EBT was effective in the treatment of PTSD. The findings related to adequacy showed that not all studies using VR-EBT reported having followed the clinical guidelines for evidence-based interventions in the treatment of PTSD. Regarding acceptability, few studies evaluated this subject. However, the findings are very promising, and patients reported high acceptability and satisfaction with the inclusion of VR in the treatment of PTSD. Conclusion The main weaknesses identified in this review focus on the need for more controlled studies, the need to standardize treatment protocols using VR-EBT, and the need to include assessments of acceptability and related variables. Finally, this paper highlights some directions and future perspectives for using VR-EBT in PTSD treatment. PMID:26491332

Acceptability and characteristics of 124 human bioequivalence studies with active substances classified according to the Biopharmaceutic Classification System

PubMed Central

Ramirez, Elena; Laosa, Olga; Guerra, Pedro; Duque, Blanca; Mosquera, Beatriz; Borobia, Alberto M; Lei, Suhua H; Carcas, Antonio J; Frias, Jesus

2010-01-01

AIM The aim of this study was to evaluate the acceptability of 124 bioequivalence (BE) studies with 80 active substances categorized according to the Biopharmaceutics Classification System (BCS) in order to establish if there were different probabilities of proving BE between the different BCS classes. METHODS We evaluated the differences between pharmaceutical products with active substances from different BCS classes in terms of acceptability, number of subjects in the study (n), the point estimates, and intra- and inter-subject coefficients of variation data from BE studies with generic products. RESULTS Out of 124 BE studies 89 (71.77%) were performed with pharmaceutical products containing active substances classified by the BCS. In all BCS classes there were non-bioequivalent pharmaceutical products: 4 out of 26 (15.38%) in class 1, 14 out of 28 (50%) in class 2, 3 out of 22 (13.63%) in class 3 and 1 out of 13 (7.69%) in class 4. When we removed those pharmaceutical products in which intra-subject variability was higher than predicted (2 in class 1 active substances, 9 in class 2 and 2 in class 3) there were still non-BE pharmaceutical products in classes 1, 2 and 3. CONCLUSIONS Comparisons between pharmaceutical products with active substances from the four BCS classes have not allowed us to define differential characteristics of each class in terms of n, inter and intra-subject variability for Cmax or AUC. Despite the usually employed test dissolution methodology proposed as quality control, pharmaceutical products with active substances from the four classes of BCS showed non-BE studies. PMID:21039763

Effects of mass on aircraft sidearm controller characteristics

NASA Technical Reports Server (NTRS)

Wagner, Charles A.

1994-01-01

When designing a flight simulator, providing a set of low mass variable-characteristic pilot controls can be very difficult. Thus, a strong incentive exists to identify the highest possible mass that will not degrade the validity of a simulation. The NASA Dryden Flight Research Center has conducted a brief flight program to determine the maximum acceptable mass (system inertia) of an aircraft sidearm controller as a function of force gradient. This information is useful for control system design in aircraft as well as development of suitable flight simulator controls. A modified Learjet with a variable-characteristic sidearm controller was used to obtain data. A boundary was defined between mass considered acceptable and mass considered unacceptable to the pilot. This boundary is defined as a function of force gradient over a range of natural frequencies. This investigation is limited to a study of mass-frequency characteristics only. Results of this investigation are presented in this paper.

Viability and resistance of lactobacilli isolated from cocoa fermentation to simulated gastrointestinal digestive steps in soy yogurt.

PubMed

Saito, V S T; Dos Santos, T F; Vinderola, C G; Romano, C; Nicoli, J R; Araújo, L S; Costa, M M; Andrioli, J L; Uetanabaro, A P T

2014-02-01

To study the potential probiotic characteristics such as decrease of pH, microbial viability, and tolerance to simulated digestive steps of fermented soy beverage ("soy yogurt") produced with lactobacilli isolated from cocoa fermentation (Lactobacillus fermentum TcUESC01 and Lactobacillus plantarum TcUESC02) during fermentation and refrigerated storage. The sensory acceptance of the yogurts was also tested. Samples of soy yogurt produced with L. fermentum TcUESC01 or L. plantarum TcUESC02 were collected during fermentation (0, 4, 8, and 12 h) and refrigerated storage (1, 9, 18, and 27 d), and submitted to pH and bacterial viability determinations. Tolerance to simulated digestion steps was done with refrigerated storage samples at 9 °C. Simulated digestion was performed in 3 successive steps: exposure to pepsin-HCl solution, bile shock, and simulated small intestinal juice. During storage, a decrease in pH and lactobacillus viability was observed. L. fermentum TcUESC01 showed to be more resistant than L. plantarum TcUESC02 to simulated gastrointestinal digestion. All soy yogurts showed acceptable hedonic scores (greater than 5 in a 9-point hedonic scale ranging from "like extremely" to "dislike extremely") in sensory evaluation for flavor, aroma, color, consistency, and overall impression. L. plantarum TcUESC02 and, especially, L. fermentum TcUESC01 showed potential probiotic characteristics when considering pH, cell viability, and tolerance to simulated digestive steps and did not affect the sensory characteristics when supplemented to soy yogurt during storage. © 2014 Institute of Food Technologists®

A pilot study on the functional performance and acceptability of an innovative female condom (Wondaleaf®) in Malaysia.

PubMed

Ting, Rachel Sing-Kiat; Wong, Ee-Lynn; Tnay, Jessie Koh-Sing

2018-01-01

Female condom (FC) has been available for over 30 years, but it still lacks wide acceptability. To overcome misdirection and invagination occurring in FC and to provide a wider area of protection, Wondaleaf ® (WL), a new-generation adhesive FC, was recently invented. This pioneering study sought to assess the acceptability and functional performance of WL among Malaysian women. A mixed method survey was conducted in three cities of Malaysia, recruiting sexually active heterosexual women, aged 18-50, by snowball sampling method. Participants were provided with WL and initially surveyed to rate its performance in five coital usages over 2 months. After that, the participants underwent a second survey to rate their satisfaction and acceptability toward WL. Descriptive statistics on clinical failure rates were tabulated with correlational analysis performed to identify major variables contributing to WL's functional performance and acceptability. Out of the 51 enrolled participants, 31 women completed the required surveys. WL's total clinical failure rate was 2.60% (out of 155 condom uses) with above-average ratings of functional performance. The ease of use significantly correlated with ratings of no slippage and no misdirection. The confidence in WL's safety features significantly correlated with a sense of empowerment and protection. WL has a relatively low risk of clinical failures and an overall favorable acceptability among Malaysian women. However, this study also showed that its future usage largely depends on partner acceptability. It may have the potential of complementing the existing barrier toward contraceptive use. Further studies are needed to understand the global acceptability of WL.

The diagnostic performance of shear wave elastography for malignant cervical lymph nodes: A systematic review and meta-analysis.

PubMed

Suh, Chong Hyun; Choi, Young Jun; Baek, Jung Hwan; Lee, Jeong Hyun

2017-01-01

To evaluate the diagnostic performance of shear wave elastography for malignant cervical lymph nodes. We searched the Ovid-MEDLINE and EMBASE databases for published studies regarding the use of shear wave elastography for diagnosing malignant cervical lymph nodes. The diagnostic performance of shear wave elastography was assessed using bivariate modelling and hierarchical summary receiver operating characteristic modelling. Meta-regression analysis and subgroup analysis according to acoustic radiation force impulse imaging (ARFI) and Supersonic shear imaging (SSI) were also performed. Eight eligible studies which included a total sample size of 481 patients with 647 cervical lymph nodes, were included. Shear wave elastography showed a summary sensitivity of 81 % (95 % CI: 72-88 %) and specificity of 85 % (95 % CI: 70-93 %). The results of meta-regression analysis revealed that the prevalence of malignant lymph nodes was a significant factor affecting study heterogeneity (p < .01). According to the subgroup analysis, the summary estimates of the sensitivity and specificity did not differ between ARFI and SSI (p = .93). Shear wave elastography is an acceptable imaging modality for diagnosing malignant cervical lymph nodes. We believe that both ARFI and SSI may have a complementary role for diagnosing malignant cervical lymph nodes. • Shear wave elastography is acceptable modality for diagnosing malignant cervical lymph nodes. • Shear wave elastography demonstrated summary sensitivity of 81 % and specificity of 85 %. • ARFI and SSI have complementary roles for diagnosing malignant cervical lymph nodes.

Test experience, 490 N high performance (321 sec Isp) engine

NASA Technical Reports Server (NTRS)

Schoenman, L.; Rosenberg, S. D.; Jassowski, D. M.

1992-01-01

Engines with area ratios of 44:1 and 286:1 are tested by means of hot fire tests using the NTO/MMH bipropellant to maximize the performance of the combined technologies. The low-thrust engine systems are designed with oxidation resistant materials that can operate at temperatures of more than 2204 C for tens of hours. The chamber is attached to the injector in a configuration that prevents overheating of the injector, valve, and the spacecraft interface. Three injectors with 44:1 area ratios are capable of nominal specific impulse values of 309 sec, and a performance of 321 lbf-sec/lbm is noted for an all-welded engine assembly with area ratio of 286:1. The all-welded engine is shown to have an acceptable design margin for thermal characteristics. High-performance liquid apogee engines are shown to perform optimally when based on iridium/rhenium chamber technology, use of a special platelet injector, and the minimization of losses due to fuel-film cooling.

There is no such thing as a biocompatible material.

PubMed

Williams, David F

2014-12-01

This Leading Opinion Paper discusses a very important matter concerning the use of a single word in biomaterials science. This might be considered as being solely concerned with semantics, but it has implications for the scientific rationale for biomaterials selection and the understanding of their performance. That word is the adjective 'biocompatible', which is often used to characterize a material property. It is argued here that biocompatibility is a perfectly acceptable term, but that it subsumes a variety of mechanisms of interaction between biomaterials and tissues or tissue components and can only be considered in the context of the characteristics of both the material and the biological host within which it placed. De facto it is a property of a system and not of a material. It follows that there can be no such thing as a biocompatible material. It is further argued that in those situations where it is considered important, or necessary, to use a descriptor of biocompatibility, as in a scientific paper, a regulatory submission or in a legal argument, the phrase 'intrinsically biocompatible system' would be the most appropriate. The rationale for this linguistic restraint is that far too often it has been assumed that some materials are 'universally biocompatible' on the basis of acceptable clinical performance in one situation, only for entirely unacceptable performance to ensue in quite different clinical circumstances. Copyright © 2014 Elsevier Ltd. All rights reserved.

Lithium D-cell study

NASA Technical Reports Server (NTRS)

Size, P.; Takeuchi, Esther S.

1993-01-01

The purpose of this contract is to evaluate parametrically the effects of various factors including the electrolyte type, electrolyte concentration, depolarizer type, and cell configuration on lithium cell electrical performance and safety. This effort shall allow for the selection and optimization of cell design for future NASA applications while maintaining close ties with WGL's continuous improvements in manufacturing processes and lithium cell design. Taguchi experimental design techniques are employed in this task, and allow for a maximum amount of information to be obtained while requiring significantly less cells than if a full factorial design were employed. Acceptance testing for this task is modeled after the NASA Document EP5-83-025, Revision C, for cell weights, OCV's and load voltages. The performance attributes that are studied in this effort are fresh capacity and start-up characteristics evaluated at two rates and two temperatures, shelf-life characteristics including start-up and capacity retention, and iterative microcalorimetry measurements. Abuse testing includes forced over discharge at two rates with and without diode protection, temperature tolerance testing, and shorting tests at three rates with the measurement of heat generated during shorting conditions.

Classification of breast abnormalities using artificial neural network

NASA Astrophysics Data System (ADS)

Zaman, Nur Atiqah Kamarul; Rahman, Wan Eny Zarina Wan Abdul; Jumaat, Abdul Kadir; Yasiran, Siti Salmah

2015-05-01

Classification is the process of recognition, differentiation and categorizing objects into groups. Breast abnormalities are calcifications which are tumor markers that indicate the presence of cancer in the breast. The aims of this research are to classify the types of breast abnormalities using artificial neural network (ANN) classifier and to evaluate the accuracy performance using receiver operating characteristics (ROC) curve. The methods used in this research are ANN for breast abnormalities classifications and Canny edge detector as a feature extraction method. Previously the ANN classifier provides only the number of benign and malignant cases without providing information for specific cases. However in this research, the type of abnormality for each image can be obtained. The existing MIAS MiniMammographic database classified the mammogram images into three features only namely characteristic of background tissues, class of abnormality and radius of abnormality. However, in this research three other features are added-in. These three features are number of spots, area and shape of abnormalities. Lastly the performance of the ANN classifier is evaluated using ROC curve. It is found that ANN has an accuracy of 97.9% which is considered acceptable.

Simulation of Image Performance Characteristics of the Landsat Data Continuity Mission (LDCM) Thermal Infrared Sensor (TIRS)

NASA Technical Reports Server (NTRS)

Schott, John; Gerace, Aaron; Brown, Scott; Gartley, Michael; Montanaro, Matthew; Reuter, Dennis C.

2012-01-01

The next Landsat satellite, which is scheduled for launch in early 2013, will carry two instruments: the Operational Land Imager (OLI) and the Thermal Infrared Sensor (TIRS). Significant design changes over previous Landsat instruments have been made to these sensors to potentially enhance the quality of Landsat image data. TIRS, which is the focus of this study, is a dual-band instrument that uses a push-broom style architecture to collect data. To help understand the impact of design trades during instrument build, an effort was initiated to model TIRS imagery. The Digital Imaging and Remote Sensing Image Generation (DIRSIG) tool was used to produce synthetic "on-orbit" TIRS data with detailed radiometric, geometric, and digital image characteristics. This work presents several studies that used DIRSIG simulated TIRS data to test the impact of engineering performance data on image quality in an effort to determine if the image data meet specifications or, in the event that they do not, to determine if the resulting image data are still acceptable.

DCT-based iris recognition.

PubMed

Monro, Donald M; Rakshit, Soumyadip; Zhang, Dexin

2007-04-01

This paper presents a novel iris coding method based on differences of discrete cosine transform (DCT) coefficients of overlapped angular patches from normalized iris images. The feature extraction capabilities of the DCT are optimized on the two largest publicly available iris image data sets, 2,156 images of 308 eyes from the CASIA database and 2,955 images of 150 eyes from the Bath database. On this data, we achieve 100 percent Correct Recognition Rate (CRR) and perfect Receiver-Operating Characteristic (ROC) Curves with no registered false accepts or rejects. Individual feature bit and patch position parameters are optimized for matching through a product-of-sum approach to Hamming distance calculation. For verification, a variable threshold is applied to the distance metric and the False Acceptance Rate (FAR) and False Rejection Rate (FRR) are recorded. A new worst-case metric is proposed for predicting practical system performance in the absence of matching failures, and the worst case theoretical Equal Error Rate (EER) is predicted to be as low as 2.59 x 10(-4) on the available data sets.

Assessing Acceptance toward Wiki Technology in the Context of Higher Education

ERIC Educational Resources Information Center

Altanopoulou, Panagiota; Tselios, Nikolaos

2017-01-01

This study investigated undergraduate students' intention to use wiki technology. An extension of the Technology Acceptance Model (TAM) has been used by taking into account not only students' wiki perceived utility and usability, but also Big Five personality characteristics and two other variables, social norms, and facilitating conditions, as…

Food Preferences and Factors Influencing Food Selectivity for Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Schreck, Kimberly A.; Williams, Keith

2006-01-01

Although clinicians and parents widely accept that children with autism spectrum disorder exhibit more feeding problems than their typically developing peers, little information is available concerning the characteristic food items accepted by these children or the possible factors contributing to these feeding problems. This article used an…

Joint Attention and Toddler Characteristics: Race, Sex and Socioeconomic Status.

ERIC Educational Resources Information Center

Saxon, Terrill F.; Reilly, John T.

1999-01-01

Investigated the relationship between joint attention and toddler's race, sex, and SES. Found that joint attention related to a "persisting" mother, whether or not the toddler accepted the initial maternal bid. Females engaged in joint attention bouts and nonpersistent maternal responses after the bid was accepted more often than males. Race and…

The impact of high hydrostatic pressure on the functionality and consumer acceptability of reduced sodium naturally cured wieners.

PubMed

Pietrasik, Z; Gaudette, N J; Johnston, S P

2017-07-01

The effects of high pressure processing (HPP; 600MPa for 3min at 8°C) on the quality and shelf life of reduced sodium naturally-cured wieners was studied. HPP did not negatively impact processing characteristics and assisted in extending shelf life of all wiener treatments up to a 12week storage period. At week 8, HPP wieners received higher acceptability scores, indicating HPP can effectively extend the sensory quality of products, including sodium reduced formulations containing natural forms of nitrite. Substitution of 50% NaCl with modified KCl had negative effect on textural characteristics of conventionally cured wieners but not those processed with celery powder as a source of nitrite. Celery powder favorably affected hydration of textural properties of wieners, and consumer acceptability of juiciness and texture was higher compared to nitrite. Sodium reduction, independent of curing agent, negatively impacted flavor acceptability, while only nitrite containing reduced sodium wieners scored significantly lower than both regular salt wieners for texture, juiciness and saltiness. Copyright © 2017 Elsevier Ltd. All rights reserved.

Physical-Chemical Characterization of Fruit Purees and Relationship with Sensory Analysis Carried out by Infants (12 to 24 mo).

PubMed

Inarejos-García, A M; Mancebo-Campos, V; Cañizares, P; Llanos, J

2015-05-01

Fruit purees are one of the foods earliest introduced foods in infants' diet during the complementary period. The rheological characteristics together with the sensory analysis are decisive factors for the acceptance of the food product by the infant. The sensory analysis of three commercial fruit purees (mixed fruits, pear, and plum) was studied by employing a new objective sensory parameter named as SAIR (Sensory Acceptance by Infants Ratio), which is the quotient between the percentage of puree consumed (%) by the time (seconds) throughout the storage time. In parallel, the rheological characteristics of the purees were analyzed in order to obtain a relationship with the SAIR parameter. It was proved that the best acceptance of the product (higher SAIR) was observed for such purees showing a lower apparent viscosity (lower consistency index, "K") and a less pseudoplastic behavior (higher flow behavior index, "n"). These results may help to obtain higher acceptance values based on easy obtainable and objective parameters. © 2015 Institute of Food Technologists®

Ten years' evaluation of potential pancreas donors in São Paulo, Brazil.

PubMed

Pinheiro, R S; Rocha-Santos, V; Pecora, R A; Macedo, R A; Nacif, L S; Andraus, W; David, A I; Pantanali, C A; Benites, C M; d'Albuquerque, L A C

2014-01-01

Pancreas transplantation is a treatment for advanced type 1 diabetes and offers significant improvement in quality of life. Recent advances in surgical techniques and immunosuppression regimes lead to good outcomes. However, despite significant higher rates of multiorgan donors in Brazil, pancreas transplantation seems to have remained stable. This study aimed to investigate the acceptance rate of potential pancreas donors in the past 10 years in São Paulo State. We retrospectively evaluated potential pancreas donors characteristics and its acceptance rate in São Paulo State in the past 10 years. We divided this period into 2 eras: 1st era from January 2003 to January 2008; and 2nd era from January 2008 to January 2013. Data were obtained from São Paulo's government official website. During the whole period, 5,005 deceased donors of all ages were available for pancreas transplantation. According to eras, we had 1,588 donors in the 1st and 3,417 in the 2nd era. In the 2nd era, donors >49 years old were significantly more common (P < .001). Blood test abnormalities, donor comorbidities, and high dosage of vasopressors also were significantly higher in the 2nd era. Rate of graft acceptance had a significant decrease in the 2nd era, from 46.4% to 25% (P < .05). Despite greater organ availability, pancreas transplantations performed in São Paulo State remained stable. Rate of graft acceptance is dramatically lower in more recent years. Copyright © 2014 Elsevier Inc. All rights reserved.

Porous membrane with high curvature, three-dimensional heat-resistance skeleton: a new and practical separator candidate for high safety lithium ion battery

NASA Astrophysics Data System (ADS)

Shi, Junli; Xia, Yonggao; Yuan, Zhizhang; Hu, Huasheng; Li, Xianfeng; Zhang, Huamin; Liu, Zhaoping

2015-02-01

Separators with high reliability and security are in urgent demand for the advancement of high performance lithium ion batteries. Here, we present a new and practical porous membrane with three-dimension (3D) heat-resistant skeleton and high curvature pore structure as a promising separator candidate to facilitate advances in battery safety and performances beyond those obtained from the conventional separators. The unique material properties combining with the well-developed structural characteristics enable the 3D porous skeleton to own several favorable properties, including superior thermal stability, good wettability with liquid electrolyte, high ion conductivity and internal short-circuit protection function, etc. which give rise to acceptable battery performances. Considering the simply and cost-effective preparation process, the porous membrane is deemed to be an interesting direction for the future lithium ion battery separator.

Feasibility model of a high reliability five-year tape transport, Volume 1. [development, performance, and test results

NASA Technical Reports Server (NTRS)

Eshleman, R. L.; Meyers, A. P.; Davidson, W. A.; Gortowski, R. C.; Anderson, M. E.

1973-01-01

The development, performance, and test results for the spaceborne magnetic tape transport are discussed. An analytical model of the tape transport was used to optimize its conceptual design. Each of the subsystems was subjected to reliability analyses which included structural integrity, maintenance of system performance within acceptable bounds, and avoidance of fatigue failure. These subsystems were also compared with each other in order to evaluate reliability characteristics. The transport uses no mechanical couplings. Four drive motors, one for each reel and one for each of two capstans, are used in a differential mode. There are two hybrid, spherical, cone tapered-crown rollers for tape guidance. Storage of the magnetic tape is provided by a reel assembly which includes the reel, a reel support structure and bearings, dust seals, and a dc drive motor. A summary of transport test results on tape guidance, flutter, and skew is provided.

Evaluation of personal cooling devices for dioxin clean-up operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawrence, W.T.; Goldman, R.F.

1988-09-07

The study investigated the use of personal coolers to increase worker productivity and safety while working at elevated, ambient temperatures cleaning up dioxin contaminated soil. The study included laboratory tests to measure the thermal characteristics of the chemical protective clothing worn and the performance of ice vest and vortex personal coolers. In addition, field tests were conducted at a dioxin clean-up site to evaluate the performance of these two types of personal coolers. The use of personal coolers was found to be an effective method of reducing the risk of heat stress. In addition, workers were able to work continuouslymore » in hot weather without following the procedure normally used to decrease heat stress, i.e., working one hour followed by one hour of resting. Both types of personal coolers were acceptable for the task being performed.« less

Porous membrane with high curvature, three-dimensional heat-resistance skeleton: a new and practical separator candidate for high safety lithium ion battery

PubMed Central

Shi, Junli; Xia, Yonggao; Yuan, Zhizhang; Hu, Huasheng; Li, Xianfeng; Zhang, Huamin; Liu, Zhaoping

2015-01-01

Separators with high reliability and security are in urgent demand for the advancement of high performance lithium ion batteries. Here, we present a new and practical porous membrane with three-dimension (3D) heat-resistant skeleton and high curvature pore structure as a promising separator candidate to facilitate advances in battery safety and performances beyond those obtained from the conventional separators. The unique material properties combining with the well-developed structural characteristics enable the 3D porous skeleton to own several favorable properties, including superior thermal stability, good wettability with liquid electrolyte, high ion conductivity and internal short-circuit protection function, etc. which give rise to acceptable battery performances. Considering the simply and cost-effective preparation process, the porous membrane is deemed to be an interesting direction for the future lithium ion battery separator. PMID:25653104

Turbopumps for cryogenic upper stage engines. [fabrication and evaluation of turbine pumps for liquid hydrogen and liquid oxygen

NASA Technical Reports Server (NTRS)

Zachary, A. T.; Csomor, A.; Tignac, L. L.

1973-01-01

Small, high-performance LO2 and LH2 turbopump assembly configurations were selected, detail designs were prepared and two of each unit were fabricated with each unit consisting of pump, turbine gas generator, and appropriate controls. Following fabrication, development testing was conducted on each type to demonstrate performance, durability, transient characteristics, and heat transfer under simulated altitude conditions. Following successful completion of development effort, the two LO2 turbopump units and one LH2 turbopump unit were acceptance tested as specified. Inspection of the units following development testing revealed no deleterious effects of testing. The test results of LO2 turbopump assembly testing correlated well with predicted performance while the LH2 turbopump test results, though generally consistent with predicted values, did show lower than anticipated developed head at the design point and in the high flow range of operation.

Porous membrane with high curvature, three-dimensional heat-resistance skeleton: a new and practical separator candidate for high safety lithium ion battery.

PubMed

Shi, Junli; Xia, Yonggao; Yuan, Zhizhang; Hu, Huasheng; Li, Xianfeng; Zhang, Huamin; Liu, Zhaoping

2015-02-05

Separators with high reliability and security are in urgent demand for the advancement of high performance lithium ion batteries. Here, we present a new and practical porous membrane with three-dimension (3D) heat-resistant skeleton and high curvature pore structure as a promising separator candidate to facilitate advances in battery safety and performances beyond those obtained from the conventional separators. The unique material properties combining with the well-developed structural characteristics enable the 3D porous skeleton to own several favorable properties, including superior thermal stability, good wettability with liquid electrolyte, high ion conductivity and internal short-circuit protection function, etc. which give rise to acceptable battery performances. Considering the simply and cost-effective preparation process, the porous membrane is deemed to be an interesting direction for the future lithium ion battery separator.

Predictors of acceptance of offered care management intervention services in a quality improvement trial for dementia.

PubMed

Kaisey, Marwa; Mittman, Brian; Pearson, Marjorie; Connor, Karen I; Chodosh, Joshua; Vassar, Stefanie D; Nguyen, France T; Vickrey, Barbara G

2012-10-01

Care management approaches have been proven to improve outcomes for patients with dementia and their family caregivers (dyads). However, acceptance of services in these programs is incomplete, impacting effectiveness. Acceptance may be related to dyad as well as healthcare system characteristics, but knowledge about factors associated with program acceptance is lacking. This study investigates patient, caregiver, and healthcare system characteristics associated with acceptance of offered care management services. This study analyzed data from the intervention arm of a cluster randomized controlled trial of a comprehensive dementia care management intervention. There were 408 patient-caregiver dyads enrolled in the study, of which 238 dyads were randomized to the intervention. Caregiver, patient, and health system factors associated with participation in offered care management services were assessed through bivariate and multivariate regression analyses. Out of the 238 dyads, 9 were ineligible for this analysis, leaving data of 229 dyads in this sample. Of these, 185 dyads accepted offered care management services, and 44 dyads did not. Multivariate analyses showed that higher likelihood of acceptance of care management services was uniquely associated with cohabitation of caregiver and patient (p < 0.001), lesser severity of dementia (p = 0.03), and higher patient comorbidity (p = 0.03); it also varied across healthcare organization sites. Understanding factors that influence care management participation could result in increased adoption of successful programs to improve quality of care. Using these factors to revise both program design as well as program promotion may also benefit external validity of future quality improvement research trials. Copyright © 2011 John Wiley & Sons, Ltd.

On the integration of ultrananocrystalline diamond (UNCD) with CMOS chip

DOE PAGES

Mi, Hongyi; Yuan, Hao -Chih; Seo, Jung -Hun; ...

2017-03-27

A low temperature deposition of high quality ultrananocrystalline diamond (UNCD) film onto a finished Si-based CMOS chip was performed to investigate the compatibility of the UNCD deposition process with CMOS devices for monolithic integration of MEMS on Si CMOS platform. DC and radio-frequency performances of the individual PMOS and NMOS devices on the CMOS chip before and after the UNCD deposition were characterized. Electrical characteristics of CMOS after deposition of the UNCD film remained within the acceptable ranges, namely showing small variations in threshold voltage V th, transconductance g m, cut-off frequency f T and maximum oscillation frequency f max.more » Finally, the results suggest that low temperature UNCD deposition is compatible with CMOS to realize monolithically integrated CMOS-driven MEMS/NEMS based on UNCD.« less

On the integration of ultrananocrystalline diamond (UNCD) with CMOS chip

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mi, Hongyi; Yuan, Hao -Chih; Seo, Jung -Hun

A low temperature deposition of high quality ultrananocrystalline diamond (UNCD) film onto a finished Si-based CMOS chip was performed to investigate the compatibility of the UNCD deposition process with CMOS devices for monolithic integration of MEMS on Si CMOS platform. DC and radio-frequency performances of the individual PMOS and NMOS devices on the CMOS chip before and after the UNCD deposition were characterized. Electrical characteristics of CMOS after deposition of the UNCD film remained within the acceptable ranges, namely showing small variations in threshold voltage V th, transconductance g m, cut-off frequency f T and maximum oscillation frequency f max.more » Finally, the results suggest that low temperature UNCD deposition is compatible with CMOS to realize monolithically integrated CMOS-driven MEMS/NEMS based on UNCD.« less

First Results of the VLBI Experiment on Radar Location of the Asteroid 2012 DA14

NASA Astrophysics Data System (ADS)

Nechaeva, M.; Antipenko, A.; Bezrukov, D.; Bezrukovs, Vl.; Dementjev, A.; Dugin, N.; Jekabsons, N.; Khutornoy, R.; Klapers, M.; Konovalenko, A.; Kulishenko, V.; Nabatov, A.; Nesteruk, V.; Pupillo, G.; Reznichenko, A.; Salerno, E.; Shmeld, I.; Skirmante, K.; Tikhomirov, Yu.; Voytyuk, V.

An international VLBI experiment on radio location of the asteroid 2012 DA14 was organized on 2013 February 15--16, during its flyby close to Earth. The purpose of observations was to investigate and specify orbital parameters of the asteroid, as well as to evaluate its rotation period and other characteristics. The irradiation of the asteroid was performed by the RT-70 transmitter at Evpatoria (Crimea, Ukraine), while the reflected signals were successfully accepted by the two 32 m radio telescopes at Medicina (Bologna, Italy) and Irbene (Ventspils, Latvia). Processing and interpretation of the data were performed both in the Radiophysical Research Institute and in the Ventspils International Radio Astronomy Center. The first results of this experiment are presented and discussed.

Effects of Non-Driving Related Task Modalities on Takeover Performance in Highly Automated Driving.

PubMed

Wandtner, Bernhard; Schömig, Nadja; Schmidt, Gerald

2018-04-01

Aim of the study was to evaluate the impact of different non-driving related tasks (NDR tasks) on takeover performance in highly automated driving. During highly automated driving, it is allowed to engage in NDR tasks temporarily. However, drivers must be able to take over control when reaching a system limit. There is evidence that the type of NDR task has an impact on takeover performance, but little is known about the specific task characteristics that account for performance decrements. Thirty participants drove in a simulator using a highly automated driving system. Each participant faced five critical takeover situations. Based on assumptions of Wickens's multiple resource theory, stimulus and response modalities of a prototypical NDR task were systematically manipulated. Additionally, in one experimental group, the task was locked out simultaneously with the takeover request. Task modalities had significant effects on several measures of takeover performance. A visual-manual texting task degraded performance the most, particularly when performed handheld. In contrast, takeover performance with an auditory-vocal task was comparable to a baseline without any task. Task lockout was associated with faster hands-on-wheel times but not altered brake response times. Results showed that NDR task modalities are relevant factors for takeover performance. An NDR task lockout was highly accepted by the drivers and showed moderate benefits for the first takeover reaction. Knowledge about the impact of NDR task characteristics is an enabler for adaptive takeover concepts. In addition, it might help regulators to make decisions on allowed NDR tasks during automated driving.

A pilot study on the functional performance and acceptability of an innovative female condom (Wondaleaf®) in Malaysia

PubMed Central

Wong, Ee-Lynn; Tnay, Jessie Koh-Sing

2018-01-01

Background Female condom (FC) has been available for over 30 years, but it still lacks wide acceptability. To overcome misdirection and invagination occurring in FC and to provide a wider area of protection, Wondaleaf® (WL), a new-generation adhesive FC, was recently invented. This pioneering study sought to assess the acceptability and functional performance of WL among Malaysian women. Methods A mixed method survey was conducted in three cities of Malaysia, recruiting sexually active heterosexual women, aged 18–50, by snowball sampling method. Participants were provided with WL and initially surveyed to rate its performance in five coital usages over 2 months. After that, the participants underwent a second survey to rate their satisfaction and acceptability toward WL. Descriptive statistics on clinical failure rates were tabulated with correlational analysis performed to identify major variables contributing to WL’s functional performance and acceptability. Results Out of the 51 enrolled participants, 31 women completed the required surveys. WL’s total clinical failure rate was 2.60% (out of 155 condom uses) with above-average ratings of functional performance. The ease of use significantly correlated with ratings of no slippage and no misdirection. The confidence in WL’s safety features significantly correlated with a sense of empowerment and protection. Conclusion WL has a relatively low risk of clinical failures and an overall favorable acceptability among Malaysian women. However, this study also showed that its future usage largely depends on partner acceptability. It may have the potential of complementing the existing barrier toward contraceptive use. Further studies are needed to understand the global acceptability of WL. PMID:29440937

Sensory characteristics and cross-cultural consumer acceptability of Bulgogi (Korean traditional barbecued beef).

PubMed

Hong, J H; Yoon, E K; Chung, S J; Chung, L; Cha, S M; O'Mahony, M; Vickers, Z; Kim, K O

2011-01-01

Bulgogi (Korean traditional barbecued beef) is the most well-known Korean food to foreigners. There are, however, few studies on its sensory characteristics and consumer acceptability. This study was performed to identify the sensory attributes of Bulgogi samples prepared with different formulation and to compare the consumer acceptability in Korea and the United States. Bulgogi samples were prepared with varying levels of sugar and soy sauce with/without garlic or sesame oil. Descriptive analysis was conducted by 8 trained panelists. In consumer tests, 42 consumers in Seoul, Korea, 53 consumers in Davis (Calif., U.S.A.), and 39 consumers in St. Paul (Minn., U.S.A.) participated. Higher levels of sugar and soy sauce (SSS) significantly increased sweetness, saltiness, MSG taste, and soy sauce odor/flavor compared to the control made with the standard formula (CON). Elimination of sesame oil (ESO) significantly decreased sesame oil odor/flavor and oiliness, but increased green onion flavor. Elimination of garlic (EGC) significantly increased grilled beef odor/flavor, sesame oil odor/flavor, and oiliness, but decreased intensities of all the other attributes except bitterness. The consumers in Korea and the United States rated their overall liking for all samples similarly, preferring SSS to CON, EGC, and ESO. However Korean consumers seemed to detect the differences caused by formulation changes better than the U.S. consumers and these perceived differences seemed to impact the hedonic and the just-about-right ratings. Increase in soy sauce and sugar increased both Korean and the U.S. consumers' acceptability of Bulgogi, whereas eliminating garlic did not influence the consumer acceptability despite of its significant impact on sensory attributes. The food industry is increasingly interested in ethnic foods that satisfy sophisticated appetite of today's consumers. Korean cuisine is recently gaining popularity and perceived as "adventurous and spicy," appealing to researchers and marketers in the food industry worldwide. However, it is not easy to develop a new product based on ethnic cuisine because nonsensory factors, such as food neophobia and openness to new culture, can evoke adverse responses from the consumers. A systematic sensory approach can guide the product development by identifying both sensory and nonsensory factors affecting consumer acceptability. This study investigated sensory attributes of Bulgogi (Korean traditional barbecued beef), one of the most famous Korean foods, and compared consumer acceptability between Korea and the United States. The outcomes of this study, such as flavor profiles, consumer responses, evaluation procedure, and approaches taken for cross-cultural comparison, will provide the food industries with valuable information that will help to develop effective strategies for commercializing ethnic foods including recipe development for Bulgogi marinades. © 2011 Institute of Food Technologists®

The effect of child characteristics on teachers' acceptability of classroom-based behavioral strategies and psychostimulant medication for the treatment of ADHD.

PubMed

Pisecco, S; Huzinec, C; Curtis, D

2001-09-01

Studied the effect of student characteristics on teachers' ratings of treatment acceptability for attention deficit hyperactivity disorder (ADHD). Participants (N = 159) included experienced elementary school teachers who read 1 of 6 vignettes describing a child with symptoms representative of ADHD. Vignettes varied by sex and symptom-subtype classification. However, the number and specific type of symptoms described in the vignettes were consistent across all conditions. Next, teachers read a description of a daily report card (DRC), response cost technique, classroom lottery, and medication and rated their levels of agreement to the items of the Behavioral Intervention Rating Scale (BIRS). Teachers preferred the DRC to all other forms of treatment. However, there was a significant interaction between the type of treatment and sex of the student on the 3 factors (Treatment Acceptability, Treatment Effectiveness, and Timeliness) of the BIRS.

Understanding Intention to Use Electronic Information Resources: A Theoretical Extension of the Technology Acceptance Model (TAM)

PubMed Central

Tao, Donghua

2008-01-01

This study extended the Technology Acceptance Model (TAM) by examining the roles of two aspects of e-resource characteristics, namely, information quality and system quality, in predicting public health students’ intention to use e-resources for completing research paper assignments. Both focus groups and a questionnaire were used to collect data. Descriptive analysis, data screening, and Structural Equation Modeling (SEM) techniques were used for data analysis. The study found that perceived usefulness played a major role in determining students’ intention to use e-resources. Perceived usefulness and perceived ease of use fully mediated the impact that information quality and system quality had on behavior intention. The research model enriches the existing technology acceptance literature by extending TAM. Representing two aspects of e-resource characteristics provides greater explanatory information for diagnosing problems of system design, development, and implementation. PMID:18999300

Understanding intention to use electronic information resources: A theoretical extension of the technology acceptance model (TAM).

PubMed

Tao, Donghua

2008-11-06

This study extended the Technology Acceptance Model (TAM) by examining the roles of two aspects of e-resource characteristics, namely, information quality and system quality, in predicting public health students' intention to use e-resources for completing research paper assignments. Both focus groups and a questionnaire were used to collect data. Descriptive analysis, data screening, and Structural Equation Modeling (SEM) techniques were used for data analysis. The study found that perceived usefulness played a major role in determining students' intention to use e-resources. Perceived usefulness and perceived ease of use fully mediated the impact that information quality and system quality had on behavior intention. The research model enriches the existing technology acceptance literature by extending TAM. Representing two aspects of e-resource characteristics provides greater explanatory information for diagnosing problems of system design, development, and implementation.

Effects of Aging and Domain Knowledge on Usability in Small Screen Devices for Diabetes Patients

NASA Astrophysics Data System (ADS)

Calero Valdez, André; Ziefle, Martina; Horstmann, Andreas; Herding, Daniel; Schroeder, Ulrik

Technology acceptance has become a key concept for the successful rollout of technical devices. Though the concept is intensively studied for nearly 20 years now, still, many open questions remain. This especially applies to technology acceptance of older users, which are known to be very sensitive to suboptimal interfaces and show considerable reservations towards the usage of new technology. Mobile small screen technology increasingly penetrates health care and medical applications. This study investigates impacts of aging, technology expertise and domain knowledge on user interaction using the example of diabetes. For this purpose user effectiveness and efficiency have been measured on a simulated small screen device and related to user characteristics, showing that age and technology expertise have a big impact on usability of the device. Furthermore, impacts of user characteristics and success during the trial on acceptance of the device were surveyed and analyzed.

The Impact of Rendered Protein Meal Oxidation Level on Shelf-Life, Sensory Characteristics, and Acceptability in Extruded Pet Food.

PubMed

Chanadang, Sirichat; Koppel, Kadri; Aldrich, Greg

2016-07-28

Pet foods are expected to have a shelf-life for 12 months or more. Sensory analysis can be used to determine changes in products and to estimate products' shelf-life. The objectives of this study were to (1) investigate how increasing levels of oxidation in rendered protein meals used to produce extruded pet food affected the sensory properties and (2) determine the effect of shelf-life on pet owners' acceptability of extruded pet food diet formulated without the use of preservative. Pet food diets contained beef meat bone meal (BMBM) and chicken byproduct meal (CBPM) in which the oxidation was retarded with ethoxyquin, mixed tocopherols, or none at all, and then extruded into dry pet foods. These samples represented low, medium, and high oxidation levels, respectively. Samples were stored for 0, 3, 6, 9, and 12 months at ambient temperature. Each time point, samples were evaluated by six highly trained descriptive panelists for sensory attributes related to oxidation. Samples without preservatives were chosen for the acceptability test, since the differences in sensory characteristics over storage time were more distinguishable in those samples. Pet owners evaluated samples for aroma, appearance and overall liking. Descriptive sensory analysis detected significant changes in oxidized-related sensory characteristics over storage time. However, the differences for CBPM samples were more pronounced and directional. The consumer study showed no differences in pet owners' acceptability for BMBM samples. However, the noticeable increase in aroma characteristics (rancid aroma 0.33-4.21) in CBPM samples over storage time did have a negative effect on consumer's liking (overall liking 5.52-4.95).

A Computer-Aided Diagnosis System Using Artificial Intelligence for the Diagnosis and Characterization of Thyroid Nodules on Ultrasound: Initial Clinical Assessment.

PubMed

Choi, Young Jun; Baek, Jung Hwan; Park, Hye Sun; Shim, Woo Hyun; Kim, Tae Yong; Shong, Young Kee; Lee, Jeong Hyun

2017-04-01

An initial clinical assessment is described of a new, commercially available, computer-aided diagnosis (CAD) system using artificial intelligence (AI) for thyroid ultrasound, and its performance is evaluated in the diagnosis of malignant thyroid nodules and categorization of nodule characteristics. Patients with thyroid nodules with decisive diagnosis, whether benign or malignant, were consecutively enrolled from November 2015 to February 2016. An experienced radiologist reviewed the ultrasound image characteristics of the thyroid nodules, while another radiologist assessed the same thyroid nodules using the CAD system, providing ultrasound characteristics and a diagnosis of whether nodules were benign or malignant. The diagnostic performance and agreement of US characteristics between the experienced radiologist and the CAD system were compared. In total, 102 thyroid nodules from 89 patients were included; 59 (57.8%) were benign and 43 (42.2%) were malignant. The CAD system showed a similar sensitivity as the experienced radiologist (90.7% vs. 88.4%, p > 0.99), but a lower specificity and a lower area under the receiver operating characteristic (AUROC) curve (specificity: 74.6% vs. 94.9%, p = 0.002; AUROC: 0.83 vs. 0.92, p = 0.021). Classifications of the ultrasound characteristics (composition, orientation, echogenicity, and spongiform) between radiologist and CAD system were in substantial agreement (κ = 0.659, 0.740, 0.733, and 0.658, respectively), while the margin showed a fair agreement (κ = 0.239). The sensitivity of the CAD system using AI for malignant thyroid nodules was as good as that of the experienced radiologist, while specificity and accuracy were lower than those of the experienced radiologist. The CAD system showed an acceptable agreement with the experienced radiologist for characterization of thyroid nodules.

46 CFR 164.023-11 - Acceptance tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Acceptance tests. 164.023-11 Section 164.023-11 Shipping...: SPECIFICATIONS AND APPROVAL MATERIALS Thread for Personal Flotation Devices § 164.023-11 Acceptance tests. (a) Performance testing. Manufacturers shall ensure that the performance tests described in § 164.023-7 (a) or (b...

Key acceptability attributes of orodispersible films.

PubMed

Scarpa, Mariagiovanna; Paudel, Amrit; Kloprogge, Frank; Hsiao, Wen Kai; Bresciani, Massimo; Gaisford, Simon; Orlu, Mine

2018-04-01

The features rendering orodispersible films (ODFs) patient-centric formulations are widely discussed in the scientific literature. However there is a lack of research studies exploring ODF characteristics with a potential impact on end-user acceptability. The aim of this study was to identify the key ODF characteristics affecting end-user acceptability by developing in vitro test methods for the prediction of ODFs acceptability and correlate these formulation characteristics with the data obtained from a human panel study. Four drug-free single-polymer films were prepared by solvent casting. Solutions of poly(vinyl) alcohol (PVOH) 39 KDa (P1), PVOH 197 KDa (P2), carboxymethylcellulose (CMC) 395 KDa (C1), and CMC 725 KDa (C2) were prepared. Texture analysis and Dynamic Mechanical Analysis (DMA) were used to assess film tack. Petri dish and drop methods were used to assess disintegration time. A human panel of 24 healthy young adults was employed to identify end-user acceptability criteria of the four study film samples. Texture analysis data of ODF tack were not found to be in agreement with the in vivo perceived stickiness in the mouth. However, measurement of the area under the adhesive force curve obtained by DMA correlated with in vivo perceived stickiness data for all samples. The disintegration times obtained by drop method were more comparable to human panel data than the petri dish method. Hence DMA and drop methods proved to be promising methodologies for the prediction of the end-user acceptability. The type and molecular weight of the film-forming polymer had a strong influence on stickiness perception, whereas only polymeric molecular weight influenced perceived disintegration time. The human panel study showed that Participant Reported Outcomes (PROs) for the perceived stickiness in the mouth and disintegration time of test films received significantly different scores between samples, and thus were identified as the key attributes with the potential to affect the end-user acceptability. ODF stickiness and disintegration time should therefore be evaluated at an early stage of the drug product design. Copyright © 2018 Elsevier B.V. All rights reserved.

A Generalized Pivotal Quantity Approach to Analytical Method Validation Based on Total Error.

PubMed

Yang, Harry; Zhang, Jianchun

2015-01-01

The primary purpose of method validation is to demonstrate that the method is fit for its intended use. Traditionally, an analytical method is deemed valid if its performance characteristics such as accuracy and precision are shown to meet prespecified acceptance criteria. However, these acceptance criteria are not directly related to the method's intended purpose, which is usually a gurantee that a high percentage of the test results of future samples will be close to their true values. Alternate "fit for purpose" acceptance criteria based on the concept of total error have been increasingly used. Such criteria allow for assessing method validity, taking into account the relationship between accuracy and precision. Although several statistical test methods have been proposed in literature to test the "fit for purpose" hypothesis, the majority of the methods are not designed to protect the risk of accepting unsuitable methods, thus having the potential to cause uncontrolled consumer's risk. In this paper, we propose a test method based on generalized pivotal quantity inference. Through simulation studies, the performance of the method is compared to five existing approaches. The results show that both the new method and the method based on β-content tolerance interval with a confidence level of 90%, hereafter referred to as the β-content (0.9) method, control Type I error and thus consumer's risk, while the other existing methods do not. It is further demonstrated that the generalized pivotal quantity method is less conservative than the β-content (0.9) method when the analytical methods are biased, whereas it is more conservative when the analytical methods are unbiased. Therefore, selection of either the generalized pivotal quantity or β-content (0.9) method for an analytical method validation depends on the accuracy of the analytical method. It is also shown that the generalized pivotal quantity method has better asymptotic properties than all of the current methods. Analytical methods are often used to ensure safety, efficacy, and quality of medicinal products. According to government regulations and regulatory guidelines, these methods need to be validated through well-designed studies to minimize the risk of accepting unsuitable methods. This article describes a novel statistical test for analytical method validation, which provides better protection for the risk of accepting unsuitable analytical methods. © PDA, Inc. 2015.

Electronic-nose applications for fruit identification, ripeness, and quality grading

Treesearch

Manuela Baietto; Dan Wilson

2015-01-01

Fruits produce a wide range of volatile organic compounds that impart their characteristically distinct aromas and contribute to unique flavor characteristics. Fruit aroma and flavor characteristics are of key importance in determining consumer acceptance in commercial fruit markets based on individual preference. Fruit producers, suppliers and retailers traditionally...

Computer-Aided Techniques for Providing Operator Performance Measures.

ERIC Educational Resources Information Center

Connelly, Edward M.; And Others

This report documents the theory, structure, and implementation of a performance processor (written in FORTRAN IV) that can accept performance demonstration data representing various levels of operator's skill and, under user control, analyze data to provide candidate performance measures and validation test results. The processor accepts two…

How the Addition of Spices and Herbs to Virgin Olive Oil to Produce Flavored Oils Affects Consumer Acceptance.

PubMed

Issaoui, Manel; Flamini, Guido; Souid, Sondess; Bendini, Alessandra; Barbieri, Sara; Gharbi, Ines; Toschi, Tullia Gallina; Cioni, Pier Luigi; Hammami, Mohamed

2016-06-01

With the aim to expand the olive oil market to a larger number of consumers who are not familiar with the sensory characteristics of virgin olive oil, the use of novel products known as "flavored olive oils", obtained by adding different kind of spices and aromatic herbs, is spreading in many countries. In order to test consumer acceptability of this type of product, in a country (Tunisia) in which virgin olive oil is regularly consumed, flavored olive oils were prepared by adding aromatic extracts of thyme, oregano, a mix of herbs (used as pizza seasoning), rosemary, and basil to a monovarietal Chemlali virgin olive oil and a consumer test on 206 subjects was performed. Selected quality parameters (free acidity, peroxide number, oxidative stability, specific absorption at K232 nm and K270 nm) were also measured and no significant variations were detected. Slight differences were found concerning the content of minor compounds (chlorophylls, carotenoids and total phenols). On the other hand, notable differences were seen in the profiles of volatile compounds, which appeared to be responsible for the observed variability in consumer acceptance. Although the unflavored oil was more appreciated than the flavored ones, among the latter, thyme flavored olive oil was the most appreciated.

Adapting ISA system warnings to enhance user acceptance.

PubMed

Jiménez, Felipe; Liang, Yingzhen; Aparicio, Francisco

2012-09-01

Inappropriate speed is a major cause of traffic accidents. Different measures have been considered to control traffic speed, and intelligent speed adaptation (ISA) systems are one of the alternatives. These systems know the speed limits and try to improve compliance with them. This paper deals with an informative ISA system that provides the driver with an advance warning before reaching a road section with singular characteristics that require a lower safe speed than the current speed. In spite of the extensive tests performed using ISA systems, few works show how warnings can be adapted to the driver. This paper describes a method to adapt warning parameters (safe speed on curves, zone of influence of a singular stretch, deceleration process and reaction time) to normal driving behavior. The method is based on a set of tests with and without the ISA system. This adjustment, as well as the analysis of driver acceptance before and after the adaptation and changes in driver behavior (changes in speed and path) resulting from the tested ISA regarding a driver's normal driving style, is shown in this paper. The main conclusion is that acceptance by drivers increased significantly after redefining the warning parameters, but the effect of speed homogenization was not reduced. Copyright © 2010 Elsevier Ltd. All rights reserved.

Investigation of kinematic features for dismount detection and tracking

NASA Astrophysics Data System (ADS)

Narayanaswami, Ranga; Tyurina, Anastasia; Diel, David; Mehra, Raman K.; Chinn, Janice M.

2012-05-01

With recent changes in threats and methods of warfighting and the use of unmanned aircrafts, ISR (Intelligence, Surveillance and Reconnaissance) activities have become critical to the military's efforts to maintain situational awareness and neutralize the enemy's activities. The identification and tracking of dismounts from surveillance video is an important step in this direction. Our approach combines advanced ultra fast registration techniques to identify moving objects with a classification algorithm based on both static and kinematic features of the objects. Our objective was to push the acceptable resolution beyond the capability of industry standard feature extraction methods such as SIFT (Scale Invariant Feature Transform) based features and inspired by it, SURF (Speeded-Up Robust Feature). Both of these methods utilize single frame images. We exploited the temporal component of the video signal to develop kinematic features. Of particular interest were the easily distinguishable frequencies characteristic of bipedal human versus quadrupedal animal motion. We examine limits of performance, frame rates and resolution required for human, animal and vehicles discrimination. A few seconds of video signal with the acceptable frame rate allow us to lower resolution requirements for individual frames as much as by a factor of five, which translates into the corresponding increase of the acceptable standoff distance between the sensor and the object of interest.

Flight evaluation of the transonic stability and control characteristics of an airplane incorporating a supercritical wing

NASA Technical Reports Server (NTRS)

Matheny, N. W.; Gatlin, D. H.

1978-01-01

A TF-8A airplane was equipped with a transport type supercritical wing and fuselage fairings to evaluate predicted performance improvements for cruise at transonic speeds. A comparison of aerodynamic derivatives extracted from flight and wind tunnel data showed that static longitudinal stability, effective dihedral, and aileron effectiveness, were higher than predicted. The static directional stability derivative was slower than predicted. The airplane's handling qualities were acceptable with the stability augmentation system on. The unaugmented airplane exhibited some adverse lateral directional characteristics that involved low Dutch roll damping and low roll control power at high angles of attack and roll control power that was greater than satisfactory for transport aircraft at cruise conditions. Longitudinally, the aircraft exhibited a mild pitchup tendency. Leading edge vortex generators delayed the onset of flow separation, moving the pitchup point to a higher lift coefficient and reducing its severity.

Positive Psychological Wellbeing Is Required for Online Self-Help Acceptance and Commitment Therapy for Chronic Pain to be Effective.

PubMed

Trompetter, Hester R; Bohlmeijer, Ernst T; Lamers, Sanne M A; Schreurs, Karlein M G

2016-01-01

The web-based delivery of psychosocial interventions is a promising treatment modality for people suffering from chronic pain, and other forms of physical and mental illness. Despite the promising findings of first studies, patients may vary in the benefits they draw from self-managing a full-blown web-based psychosocial treatment. We lack knowledge on moderators and predictors of change during web-based interventions that explain for whom web-based interventions are especially (in)effective. In this study, we primarily explored for which chronic pain patients web-based Acceptance and Commitment Therapy (ACT) was (in)effective during a large three-armed randomized controlled trial. Besides standard demographic, physical and psychosocial factors we focused on positive mental health. Data from 238 heterogeneously diagnosed chronic pain sufferers from the general Dutch population following either web-based ACT (n = 82), or one of two control conditions [web-based Expressive Writing (EW; n = 79) and Waiting List (WL; n = 77)] were analysed. ACT and EW both consisted of nine modules and lasted nine to 12 weeks. Exploratory linear regression analyses were performed using the PROCESS macro in SPSS. Pain interference at 3-month follow-up was predicted from baseline moderator (characteristics that influence the outcome of specific treatments in comparison to other treatments) and predictor (characteristics that influence outcome regardless of treatment) variables. The results showed that none of the demographic or physical characteristics moderated ACT treatment changes compared to both control conditions. The only significant moderator of change compared to both EW and WL was baseline psychological wellbeing, and pain intensity was a moderator of change compared to EW. Furthermore, higher pain interference, depression and anxiety, and also lower levels of emotional well-being predicted higher pain interference in daily life 6 months later. These results suggest that web-based self-help ACT may not be allocated to chronic pain sufferers experiencing low levels of mental resilience resources such as self-acceptance, goals in life, and environmental mastery. Other subgroups are identified that potentially need specific tailoring of (web-based) ACT. Emotional and psychological wellbeing should receive much more attention in subsequent studies on chronic pain and illness.

MR colonography with fecal tagging: do individual patient characteristics influence image quality?

PubMed

Kinner, Sonja; Kuehle, Christiane A; Langhorst, Jost; Ladd, Susanne C; Nuefer, Michael; Barkhausen, Joerg; Lauenstein, Thomas C

2007-05-01

To evaluate if different patient characteristics influence performance of fecal tagging (a new MR colonography (MRC) technique to label stool to avoid bowel cleansing) and, consecutively, MR image quality. A total of 333 patients (mean age = 61 years) underwent MRC with fecal tagging. Four segments of the large bowel (ascending, transverse, descending, and sigmoid colon) were assessed as for the presence of nontagged stool particles, which can impede an assessment of the colonic wall. Ratings were correlated with patients' characteristics including patient age (<55 vs. > or =55 years), body mass index (BMI) (<25 vs. > or =25), gender, and acceptance levels for fecal tagging. Statistical analysis was performed using a Mann-Whitney U-test. A total of 1332 colonic segments were evaluated. Among them, 327 segments (25%) did not contain any visible stool particles. Considerably reduced image quality was found in 61 segments (5%). Best image quality was found in the sigmoid colon (mean value = 1.9), while image quality of the ascending colon turned out to be worst (mean value = 2.6). Fecal tagging effectiveness showed a reverse correlation with patient age. However, all other characteristics did not have a statistically significant influence on fecal tagging outcome. MRC in conjunction with barium-based fecal tagging led to diagnostic image quality in 95% of all colonic segments. Since tagging results were significantly decreased in patients > or =55 years, tagging protocols should to be modified in this group, i.e., by increasing the time interval of tagging administration. (c) 2007 Wiley-Liss, Inc.

Sterilisation: characteristics of vasectomy acceptors in Delhi.

PubMed

Sarkar, N N

1993-01-01

The place of vasectomy within the sterilisation programme in Delhi over the period 1983-88 is reviewed and data on vasectomy acceptance and characteristics of acceptors are analysed. Findings suggest a need to improve the strategy for the promotion of vasectomy within the metropolis.

Social characteristics and care needs of older persons with medically unexplained symptoms: a case-control study.

PubMed

Hanssen, Denise J C; Oude Voshaar, Richard C; Naarding, Paul; Rabeling-Keus, Inge M; Olde Hartman, Tim C; Lucassen, Peter L B J

2016-12-01

Research in younger patients with medically unexplained symptoms (MUS) has shown impairments in social functioning, such as loneliness and a reduced quality of the patient-doctor relationship. As far as we know, no studies have been performed on social functioning in older MUS patients; self-reported care needs of older MUS patients remain unknown. To explore social characteristics and care needs of older persons with chronic MUS, when compared to older persons with chronic medically explained symptoms (MES). Patient characteristics of 107 older persons (>60 years) with chronic MUS were compared to 150 older persons with chronic MES in a case-control design. Participants were recruited via advertisements, general practices and a specialized clinic. All participants completed questionnaires on social functioning; the Camberwell Assessment of Need for the Elderly was used to draw up care needs. Linear regression analyses were performed to explore the association between social characteristics and group (MUS/MES), adjusted for demographic and physical determinants. Multiple chi-square tests were performed to detect between-group differences regarding care needs. After adjustments, older MUS patients were slightly but significantly lonelier, reported a somewhat lower quality of their patient-doctor relationship, but reported equal social support levels when compared to MES patients. MUS patients more often reported unmet care needs regarding health and information provision about their health status. Only small differences in social functioning were found between older MUS and MES patients. Possibly, training future doctors in giving acceptable explanations for the patient's complaints could improve the unmet care need of information provision in older MUS patients. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The Classroom Environment Questionnaire (CEQ): Development and preliminary structural validity.

PubMed

Lyons, Carissa; Brown, Ted; Bourke-Taylor, Helen

2018-04-16

Occupational therapists offer a unique perspective regarding the contribution of the environment to occupational performance. Therefore, a scale that measures the unique characteristics of the primary school classroom environment where children complete their daily schoolwork occupations is needed. The aim of this study was to develop and psychometrically evaluate a new teacher-report questionnaire that measures a number of environmental characteristics of primary school classrooms. Participants (N = 117) completed the Classroom Environment Questionnaire (CEQ), which utilises a 4-point Likert scale where teachers rate 51 environmental characteristics of their classroom. Teachers also rate the extent to which they believe the physical, social, temporal, institutional and cultural classroom environmental domains contribute to students' schoolwork performance using a 10-point scale. The structural validity of the CEQ was examined using principal component analysis (PCA). Inter-item correlations were examined using Pearson r correlations, while the internal consistency of the CEQ was assessed using Cronbach's alpha. PCA revealed the CEQ to be multidimensional, with 31 items loading onto nine viable factors, representing the unique nature of classroom environments. Based on the PCA results, 20 items were removed from the CEQ. Cronbach's alpha and correlation analysis indicated that most CEQ subsections had acceptable internal consistency (alpha range 0.70-0.82), with four subsections demonstrating a lower level of internal consistency (alpha range 0.55-0.69). Preliminary structural validity and internal consistency analysis findings confirm that the CEQ has potential to be a useful scale for professionals wishing to examine the unique characteristics of primary school classrooms that influence the occupational performance of students. Ongoing analyses will be undertaken to further explore the CEQ's validity and reliability. © 2018 Occupational Therapy Australia.

Acceptance Noise Level: Effects of the Speech Signal, Babble, and Listener Language

ERIC Educational Resources Information Center

Shi, Lu-Feng; Azcona, Gabrielly; Buten, Lupe

2015-01-01

Purpose: The acceptable noise level (ANL) measure has gained much research/clinical interest in recent years. The present study examined how the characteristics of the speech signal and the babble used in the measure may affect the ANL in listeners with different native languages. Method: Fifteen English monolingual, 16 Russian-English bilingual,…

The Bonds That Remind Us: Maternal Reminiscing for Bonding Purposes in Relation to Children's Perceived Competence and Social Acceptance

ERIC Educational Resources Information Center

Kulkofsky, Sarah; Behrens, Kazuko Y.; Battin, David B.

2015-01-01

The present study investigated the relation between characteristics of mother-child reminiscing and children's perceived competence and social acceptance. We focused specifically on conversations for bonding purposes (i.e., conversations that serve the function of maintaining or strengthening the relationship between the child and the mother) as…

Evaluating outcomes of computer-based classroom testing: Student acceptance and impact on learning and exam performance.

PubMed

Zheng, Meixun; Bender, Daniel

2018-03-13

Computer-based testing (CBT) has made progress in health sciences education. In 2015, the authors led implementation of a CBT system (ExamSoft) at a dental school in the U.S. Guided by the Technology Acceptance Model (TAM), the purposes of this study were to (a) examine dental students' acceptance of ExamSoft; (b) understand factors impacting acceptance; and (c) evaluate the impact of ExamSoft on students' learning and exam performance. Survey and focus group data revealed that ExamSoft was well accepted by students as a testing tool and acknowledged by most for its potential to support learning. Regression analyses showed that perceived ease of use and perceived usefulness of ExamSoft significantly predicted student acceptance. Prior CBT experience and computer skills did not significantly predict acceptance of ExamSoft. Students reported that ExamSoft promoted learning in the first program year, primarily through timely and rich feedback on examination performance. t-Tests yielded mixed results on whether students performed better on computerized or paper examinations. The study contributes to the literature on CBT and the application of the TAM model in health sciences education. Findings also suggest ways in which health sciences institutions can implement CBT to maximize its potential as an assessment and learning tool.

Performing the lockout/tagout risk assessment.

PubMed

Wallace, W Jon

2007-03-01

Lockout/tagout provides the greatest level routine, repetitive, and integral to the production process, a risk assessment should be performed. If the task performed poses an unacceptable risk, acceptable risk reduction methods should be implemented to reduce the risk to acceptable levels.

[Characteristics of lip-mouth region in smiling position from 80 adults with acceptable faces and individual normal occlusions].

PubMed

Zhang, J; Chen, Y; Zhou, X

1997-07-01

The Characteristics of Lip-mouth region including the soft and hard tissues in smiling position with frontal fixed position photographic computered analysis was studied. The examples were 80 adults (40 males and 40 females) with acceptable faces and individual normal occlusions. The age was between 17-25 years of age. The method adopting maximum smiling position to study the lip-mouth region is scientific, and the maximum smile line could be divided into three categories: low smile line-a-counted for 16.25% of the total samples; average smile line--68.75%; high smile line--15%.

Correlating consumer perception and consumer acceptability of traditional Doenjang in Korea.

PubMed

Kim, Mina K; Lee, Kwang-Geun

2014-11-01

Doenjang is a traditional Korean food and is widely used for many Korean foods. Consumer perception and consumer acceptability on the typical sensory characteristics of traditional Doenjang remain unknown. The objective of the current study was to determine the consumer perception on traditional Doenjang characteristics and how preexisting consumer perception influenced the consumer liking for traditionally and commercially manufactured Doenjang. A consumer survey was conducted by presenting 26 sensory descriptions to consumers (n = 82) for check-all-that-apply measurement. Then, a consumer acceptance test was conducted over 2 d on 2 Doenjang samples representing commercially produced Doenjang and traditionally produced Doenjang: Day 1 consumers evaluated without any information (n = 182), and day 2 consumers evaluated samples informed that both samples were made by the "traditional" method (n = 109). Two-way ANOVA and multivariate analyses were conducted. Consumers' preexisting perceptions on the typical sensory characteristics of traditionally made Doenjang were similar in that they associate "gu-soo flavor," "dark color," "flavorful," and "well-fermented flavor" regardless of consumer demographics and Doenjang user status. However, these consumer perceptions on sensory attributes of traditional Doenjang did not agree with desirable sensory attributes for consumer liking, in that consumers preferred the commercially made Doenjang regardless of the evaluation condition and consumer user status. Findings from the current study therefore suggested a discrepancy between the preexisting current consumer perception and actual consumer acceptability of traditional Doenjang products. © 2014 Institute of Food Technologists®

Depression screening among older adults attending low-vision rehabilitation and eye-care services: Characteristics of those who screen positive and client acceptability of screening.

PubMed

Holloway, Edith E; Sturrock, Bonnie A; Lamoureux, Ecosse L; Keeffe, Jill E; Rees, Gwyneth

2015-12-01

To investigate characteristics associated with screening positive for depressive symptoms among older adults accessing low-vision rehabilitation and eye-care services and to determine client acceptability of depression screening using the Patient Health Questionnaire-2 (PHQ-2) in these settings. One-hundred and twenty-four older adults (mean = 77.02 years, SD = 9.12) attending low-vision rehabilitation and eye-care services across Australia were screened for depression and invited to complete a telephone-administered questionnaire to determine characteristics associated with depressive symptoms and client acceptability of screening in these settings. Thirty-seven per cent (n = 46/124) of participants screened positive for depressive symptoms, and the majority considered the new depression screening method to be a 'good idea' in vision services (85%). Severe vision loss (<6/60 in the better eye) was associated with an increased odds of screening positive for depressive symptoms (odds ratio 2.37; 95% confidence interval 1.08-6.70) even after adjusting for potential confounders. Participants who screened positive had a preference for 'talking' therapy or a combination of medication and 'talking therapy' delivered within their own home (73%) or via telephone (67%). The PHQ-2 appears to be an acceptable method for depression screening in eye-care settings among older adults. Targeted interventions that incorporate home-based or telephone delivered therapy sessions may improve outcomes for depression in this group. © 2014 ACOTA.

Overview of 10 inch Diameter HTPB Hybrid Motor Testing with Liquid Oxygen at Stennis Space Center

NASA Technical Reports Server (NTRS)

Knowles, Timothy E.; Kearney, Darren; Roberts, Ryan

2005-01-01

To further explore the operation of hybrid rocket motors and to demonstrate the performance characteristics of the motor design Lockheed Martin funded research on a series of 10 inch diameter hybrid motors that produce less than 10 klbf sea level thrust. This test series was given the name "Hybrid Technology Test Program." These motors were fired in the existing test stand at the SSC E-3 complex Cell 1. The fuel and oxidizer for these 10 inch diameter motors are HTPB and LO2, respectively. The original goal of the testing was to verify that the predicted performance matched the actual performance of these 10 inch motors (ref. figure 1) and then confirm that the motors performed acceptably. For this element of testing horizontally fired hybrid motors will be tested using LO2 supplied from the existing facility 100 gallon LO2 tank that is pressurized with facility GN2. The thrust produced by the motor will be measured by a Lockheed Martin supplied load cell.

Robust Control for Microgravity Vibration Isolation using Fixed Order, Mixed H2/Mu Design

NASA Technical Reports Server (NTRS)

Whorton, Mark

2003-01-01

Many space-science experiments need an active isolation system to provide a sufficiently quiescent microgravity environment. Modern control methods provide the potential for both high-performance and robust stability in the presence of parametric uncertainties that are characteristic of microgravity vibration isolation systems. While H2 and H(infinity) methods are well established, neither provides the levels of attenuation performance and robust stability in a compensator with low order. Mixed H2/H(infinity), controllers provide a means for maximizing robust stability for a given level of mean-square nominal performance while directly optimizing for controller order constraints. This paper demonstrates the benefit of mixed norm design from the perspective of robustness to parametric uncertainties and controller order for microgravity vibration isolation. A nominal performance metric analogous to the mu measure, for robust stability assessment is also introduced in order to define an acceptable trade space from which different control methodologies can be compared.

Food preferences and factors influencing food selectivity for children with autism spectrum disorders.

PubMed

Schreck, Kimberly A; Williams, Keith

2006-01-01

Although clinicians and parents widely accept that children with autism spectrum disorder exhibit more feeding problems than their typically developing peers, little information is available concerning the characteristic food items accepted by these children or the possible factors contributing to these feeding problems. This article used an informant-based questionnaire to survey parents of children with autism spectrum disorders (N=138) to determine: (a) the types of feeding problems their children typically exhibit, (b) the food items their children prefer, (c) the relationship of feeding problems to family eating preferences, and (d) the relationship of the diagnostic characteristics of autism to feeding behavior. Results indicated that the children preferred fewer types of food items within groups than their families; however, family food preferences appeared to influence food selection more than the diagnostic characteristics of autism.

Technical developments in international satellite business services

NASA Astrophysics Data System (ADS)

Tan, P. P.

At the conception of International Satellite Business Services (ISBS), it was a primary objective to provide flexibility for accommodating a variety of service requirements which might be established by mutual agreement between users. The design guidelines are to ensure that the space segment is efficiently utilized, while other satellite services are protected from interference. Other considerations are related to an acceptable earth segment cost, maximum connectivity in worldwide services, the capability of growth and a reasonably smooth transition into future systems, and the maintenance of high performance objectives. Attention is given to a system overview, the characteristics of satellites for ISBS, and technological developments with some application possibilities for ISBS.

Silver halide sensitized gelatin process effects in holographic lenses recorded on Slavich PFG-01 plates

NASA Astrophysics Data System (ADS)

Collados, Maria Victoria; Arias, Isabel; García, Ana; Atencia, Jesús; Quintanilla, Manuel

2003-02-01

In this work we study the feasibility of using silver halide sensitized gelatin based on PFG-01 (Slavich) emulsions to construct uniaxial compound lenses. This processing is able to introduce variations in the thickness and refractive index of the emulsion. We prove that these changes are not sufficient to provide the observed variations in Bragg conditions in the reconstruction and that a shear-type effect must exist to explain the performance of processed emulsions. We study the characteristics of a compound lens, obtaining acceptable image quality, good resolution, and the typical field limitation of volume holographic elements.

Cough Recognition Based on Mel Frequency Cepstral Coefficients and Dynamic Time Warping

NASA Astrophysics Data System (ADS)

Zhu, Chunmei; Liu, Baojun; Li, Ping

Cough recognition provides important clinical information for the treatment of many respiratory diseases, but the assessment of cough frequency over a long period of time remains unsatisfied for either clinical or research purpose. In this paper, according to the advantage of dynamic time warping (DTW) and the characteristic of cough recognition, an attempt is made to adapt DTW as the recognition algorithm for cough recognition. The process of cough recognition based on mel frequency cepstral coefficients (MFCC) and DTW is introduced. Experiment results of testing samples from 3 subjects show that acceptable performances of cough recognition are obtained by DTW with a small training set.

Electrodynamic tethers for energy conversion

NASA Technical Reports Server (NTRS)

Nobles, W.

1986-01-01

Conductive tethers have been proposed as a new method for converting orbital mechanical energy into electrical power for use on-board a satellite (generator mode) or conversely (motor mode) as a method of providing electric propulsion using electrical energy from the satellite. The operating characteristics of such systems are functionally dependent on orbit altitude and inclination. Effects of these relationships are examined to determine acceptable regions of application. To identify system design considerations, a specific set of system performance goals and requirements are selected. The case selected is for a 25 kW auxiliary power system for use on Space Station. Appropriate system design considerations are developed, and the resulting system is described.

The beta distribution: A statistical model for world cloud cover

NASA Technical Reports Server (NTRS)

Falls, L. W.

1973-01-01

Much work has been performed in developing empirical global cloud cover models. This investigation was made to determine an underlying theoretical statistical distribution to represent worldwide cloud cover. The beta distribution with probability density function is given to represent the variability of this random variable. It is shown that the beta distribution possesses the versatile statistical characteristics necessary to assume the wide variety of shapes exhibited by cloud cover. A total of 160 representative empirical cloud cover distributions were investigated and the conclusion was reached that this study provides sufficient statical evidence to accept the beta probability distribution as the underlying model for world cloud cover.

How to pass a sensor acceptance test: using the gap between acceptance criteria and operational performance

NASA Astrophysics Data System (ADS)

Bijl, Piet

2016-10-01

When acquiring a new imaging system and operational task performance is a critical factor for success, it is necessary to specify minimum acceptance requirements that need to be met using a sensor performance model and/or performance tests. Currently, there exist a variety of models and test from different origin (defense, security, road safety, optometry) and they all do different predictions. This study reviews a number of frequently used methods and shows the effects that small changes in procedure or threshold criteria can have on the outcome of a test. For example, a system may meet the acceptance requirements but not satisfy the needs for the operational task, or the choice of test may determine the rank order of candidate sensors. The goal of the paper is to make people aware of the pitfalls associated with the acquisition process, by i) illustrating potential tricks to have a system accepted that is actually not suited for the operational task, and ii) providing tips to avoid this unwanted situation.

Adherence to dietary recommendations in diabetes mellitus: disease acceptance as a potential mediator.

PubMed

Jaworski, Mariusz; Panczyk, Mariusz; Cedro, Małgorzata; Kucharska, Alicja

2018-01-01

Adherence by diabetic patients to dietary recommendations is important for effective therapy. Considering patients' expectations in case of diet is significant in this regard. The aim of this paper was to analyze the relationship between selected independent variables (eg, regular blood glucose testing) and patients' adherence to dietary recommendations, bearing in mind that the degree of disease acceptance might play a mediation role. A cross-sectional study was conducted in 91 patients treated for type 2 diabetes mellitus in a public medical facility. Paper-and-pencil interviewing was administered ahead of the planned visit with a diabetes specialist. Two measures were applied in the study: the Acceptance and Action Diabetes Questionnaire and the Patient Diet Adherence in Diabetes Scale. Additionally, data related to sociodemographic characteristics, lifestyle-related factors, and the course of the disease (management, incidence of complications, and dietician's supervision) were also collected. The regression method was used in the analysis, and Cohen's methodology was used to estimate partial mediation. Significance of the mediation effect was assessed by the Goodman test. P -values of <0.05 were considered statistically significant. Patients' non-adherence to dietary recommendations was related to a low level of disease acceptance (standardized regression coefficient =-0.266; P =0.010). Moreover, failure to perform regular blood glucose testing was associated with a lack of disease acceptance (standardized regression coefficient =-0.455; P =0.000). However, the lack of regular blood glucose testing and low level of acceptance had only partially negative impacts on adherence to dietary recommendations (Goodman mediation test, Z =1.939; P =0.054). This dependence was not seen in patients treated with diet and concomitant oral medicines and/or insulin therapy. Effective dietary education should include activities promoting a more positive attitude toward the disease. This may be obtained by individual counseling, respecting the patient's needs, and focus on regular blood glucose testing.

Consumer Acceptance of Dry Dog Food Variations.

PubMed

Di Donfrancesco, Brizio; Koppel, Kadri; Swaney-Stueve, Marianne; Chambers, Edgar

2014-06-16

The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog's liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner's overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products.

A design study for a compact two stage in-flight separator with a high mass resolution and large acceptance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hwang, Ji-Gwang; Kim, Eun-San, E-mail: eskim1@knu.ac.kr; Hatanaka, Kichiji

2015-03-15

The rare isotope beam separator with a large angular acceptance and energy acceptance is essential for examining the characteristics of unstable nuclei and exotic nuclear reactions. Careful design, however, is required to compensate for the effects of high order aberrations induced by large aperture magnets, which are used to collect rare isotopes obtained from a high energy primary heavy-ion beam hitting a target. In order to minimize the effect of the high order aberration, the optics was based on the mirror symmetry optics, which provides smaller high order aberrations, for the separation of {sup 132}Sn produced by a fission reactionmore » between the primary beam of {sup 238}U and a relatively thick Pb target. The designed optics provides energy acceptance (full), horizontal angular acceptance, and vertical acceptance of approximately 8%, 60 mrad, and 130 mrad, respectively.« less

A design study for a compact two stage in-flight separator with a high mass resolution and large acceptance.

PubMed

Hwang, Ji-Gwang; Kim, Eun-San; Hatanaka, Kichiji

2015-03-01

The rare isotope beam separator with a large angular acceptance and energy acceptance is essential for examining the characteristics of unstable nuclei and exotic nuclear reactions. Careful design, however, is required to compensate for the effects of high order aberrations induced by large aperture magnets, which are used to collect rare isotopes obtained from a high energy primary heavy-ion beam hitting a target. In order to minimize the effect of the high order aberration, the optics was based on the mirror symmetry optics, which provides smaller high order aberrations, for the separation of (132)Sn produced by a fission reaction between the primary beam of (238)U and a relatively thick Pb target. The designed optics provides energy acceptance (full), horizontal angular acceptance, and vertical acceptance of approximately 8%, 60 mrad, and 130 mrad, respectively.

A design study for a compact two stage in-flight separator with a high mass resolution and large acceptance

NASA Astrophysics Data System (ADS)

Hwang, Ji-Gwang; Kim, Eun-San; Hatanaka, Kichiji

2015-03-01

The rare isotope beam separator with a large angular acceptance and energy acceptance is essential for examining the characteristics of unstable nuclei and exotic nuclear reactions. Careful design, however, is required to compensate for the effects of high order aberrations induced by large aperture magnets, which are used to collect rare isotopes obtained from a high energy primary heavy-ion beam hitting a target. In order to minimize the effect of the high order aberration, the optics was based on the mirror symmetry optics, which provides smaller high order aberrations, for the separation of 132Sn produced by a fission reaction between the primary beam of 238U and a relatively thick Pb target. The designed optics provides energy acceptance (full), horizontal angular acceptance, and vertical acceptance of approximately 8%, 60 mrad, and 130 mrad, respectively.

Rape myth acceptance in men who completed the prostitution offender program of British Columbia.

PubMed

Klein, Carolin; Kennedy, M Alexis; Gorzalka, Boris B

2009-06-01

In an effort to characterize the attitudes and characteristics of men who solicit sex, this study investigated rape myth acceptance as assessed by a modification of Burt's Rape Myth Acceptance Scale. The participants were all men who took part in the Prostitution Offender Program of British Columbia after being arrested for attempting to solicit sex from an undercover police officer. Relationships between endorsement of rape myths, other attitudes, sexual behavior, and demographic variables were examined. Results reveal that age, education, use of pornography, ideal frequency of intercourse, and believing that purchasing sex is a problem are all negatively correlated with rape myth acceptance. Positive correlations were found between rape myth acceptance and sexual conservatism, sexual violence/coercion, and social desirability. Results are discussed in terms of the association between rape myth acceptance and the violence frequently perpetrated against those working in the sex trade.

An Investigation of the Sampling Distributions of Equating Coefficients.

ERIC Educational Resources Information Center

Baker, Frank B.

1996-01-01

Using the characteristic curve method for dichotomously scored test items, the sampling distributions of equating coefficients were examined. Simulations indicate that for the equating conditions studied, the sampling distributions of the equating coefficients appear to have acceptable characteristics, suggesting confidence in the values obtained…

Is Donor Service Area Market Competition Associated With Organ Procurement Organization Performance?

PubMed

Adler, Joel T; Yeh, Heidi; Markmann, James F; Axelrod, David A

2016-06-01

Organ procurement organizations (OPOs) are currently evaluated on donation rates and number of organs per donor. However, there is significant variability in market characteristics which affect transplant programs' donor organ acceptance practices and OPOs' ability to successfully place higher risk organs. The impact of transplant market characteristics on OPO performance metrics has not been evaluated. The OPO performance measures were correlated annually with the Herfindahl Hirschman Index, a standard measure of market competition for centers within the OPO donor service areas from 2003 to 2011. More competitive donor service areas were associated with increased number of donors (P = 0.01) and eligible deaths (P < 0.001). Market competition was associated with increased use of high Donor Risk Index for kidney (P = 0.03) and liver (P = 0.01) allografts. The OPOs with increased competition in liver transplant also were noted to have a higher donor conversion rate (P < 0.001), more donors per million population (P < 0.001), and a higher utilization rate for liver allografts (P = 0.007). These data suggest that proposals to increase district size to increase competition among transplant programs could result in improved organ utilization over time by incentivizing the use of marginal donor organs and increasing access to transplantation.

The influence of tinnitus acceptance on the quality of life and psychological distress in patients with chronic tinnitus

PubMed Central

Riedl, David; Rumpold, Gerhard; Schmidt, Annette; Zorowka, Patrick G.; Bliem, Harald R.; Moschen, Roland

2015-01-01

Recent findings show the importance of acceptance in the treatment of chronic tinnitus. So far, very limited research investigating the different levels of tinnitus acceptance has been conducted. The aim of this study was to investigate the quality of life (QoL) and psychological distress in patients with chronic tinnitus who reported different levels of tinnitus acceptance. The sample consisted of outpatients taking part in a tinnitus coping group (n = 97). Correlations between tinnitus acceptance, psychological distress, and QoL were calculated. Receiver operating characteristic (ROC) curves were used to calculate a cutoff score for the German “Tinnitus Acceptance Questionnaire” (CTAQ-G) and to evaluate the screening abilities of the CTAQ-G. Independent sample t-tests were conducted to compare QoL and psychological distress in patients with low tinnitus acceptance and high tinnitus acceptance. A cutoff point for CTAQ-G of 62.5 was defined, differentiating between patients with “low-to-mild tinnitus acceptance” and “moderate-to-high tinnitus acceptance.” Patients with higher levels of tinnitus acceptance reported a significantly higher QoL and lower psychological distress. Tinnitus acceptance plays an important role for patients with chronic tinnitus. Increased levels of acceptance are related to better QoL and less psychological distress. PMID:26356381

Assessing the environmental characteristics of cycling routes to school: a study on the reliability and validity of a Google Street View-based audit.

PubMed

Vanwolleghem, Griet; Van Dyck, Delfien; Ducheyne, Fabian; De Bourdeaudhuij, Ilse; Cardon, Greet

2014-06-10

Google Street View provides a valuable and efficient alternative to observe the physical environment compared to on-site fieldwork. However, studies on the use, reliability and validity of Google Street View in a cycling-to-school context are lacking. We aimed to study the intra-, inter-rater reliability and criterion validity of EGA-Cycling (Environmental Google Street View Based Audit - Cycling to school), a newly developed audit using Google Street View to assess the physical environment along cycling routes to school. Parents (n = 52) of 11-to-12-year old Flemish children, who mostly cycled to school, completed a questionnaire and identified their child's cycling route to school on a street map. Fifty cycling routes of 11-to-12-year olds were identified and physical environmental characteristics along the identified routes were rated with EGA-Cycling (5 subscales; 37 items), based on Google Street View. To assess reliability, two researchers performed the audit. Criterion validity of the audit was examined by comparing the ratings based on Google Street View with ratings through on-site assessments. Intra-rater reliability was high (kappa range 0.47-1.00). Large variations in the inter-rater reliability (kappa range -0.03-1.00) and criterion validity scores (kappa range -0.06-1.00) were reported, with acceptable inter-rater reliability values for 43% of all items and acceptable criterion validity for 54% of all items. EGA-Cycling can be used to assess physical environmental characteristics along cycling routes to school. However, to assess the micro-environment specifically related to cycling, on-site assessments have to be added.

Innovative approaches for understanding seasonal influenza vaccine declination in healthcare personnel support development of new campaign strategies.

PubMed

Schult, Tamara M; Awosika, Ebi R; Hodgson, Michael J; Hirsch, Pamela R; Nichol, Kristin L; Dyrenforth, Sue R; Moore, Scott C

2012-09-01

The main objectives of our study were to explore reasons for seasonal influenza vaccine acceptance and declination in employees of a large integrated healthcare system and to identify underlying constructs that influence acceptance versus declination. Secondary objectives were to determine whether vaccine acceptance varied by hospital location and to identify facility-level measures that explained variability. A national health promotion survey of employees was conducted that included items on vaccination in the 2009-2010 influenza season. The survey was administered with two other institutional surveys in a stratified fashion: approximately 40% of participating employees were randomly assigned to complete the health promotion survey. National single-payer healthcare system with 152 hospitals. Employees of the healthcare system in 2010 who responded to the survey. Factor analysis was used to identify underlying constructs that influenced vaccine acceptance versus declination. Mean factor scores were examined in relation to demographic characteristics and occupation. Multilevel logistic regression models were used to determine whether vaccine acceptance varied by location and to identify facility-level measures that explained variability. Four factors were identified related to vaccine declination and were labeled as (1) "don't care," (2) "don't want," (3) "don't believe," and (4) "don't know." Significant differences in mean factor scores existed by demographic characteristics and occupation. Vaccine acceptance varied by location, and vaccination rates in the previous year were an important facility-level predictor. Results should guide interventions that tailor messages on the basis of particular reasons for declination. Occupation-specific and culturally appropriate messaging should be considered. Continued efforts will be taken to better understand how workplace context influences vaccine acceptance.

Understanding and enhancing user acceptance of computer technology

NASA Technical Reports Server (NTRS)

Rouse, William B.; Morris, Nancy M.

1986-01-01

Technology-driven efforts to implement computer technology often encounter problems due to lack of acceptance or begrudging acceptance of the personnel involved. It is argued that individuals' acceptance of automation, in terms of either computerization or computer aiding, is heavily influenced by their perceptions of the impact of the automation on their discretion in performing their jobs. It is suggested that desired levels of discretion reflect needs to feel in control and achieve self-satisfaction in task performance, as well as perceptions of inadequacies of computer technology. Discussion of these factors leads to a structured set of considerations for performing front-end analysis, deciding what to automate, and implementing the resulting changes.

The effect of control and display lag on unmanned air system internal pilot manual landing performance

NASA Astrophysics Data System (ADS)

Lloyd, Marshall Everett

An important characteristic of UASs is lag because it can become a considerable challenge to successful human-in-the-loop control. As such, UASs are designed and configured to minimize system lag, though this can increase acquisition and operation costs considerably. In an effort to cut costs, an organization may choose to accept greater risk and deploy a UAS with high system lag. Before this risk can be responsibly accepted, it must be quantified. While many studies have examined system lag, very few have been able to quantify the risk that various levels of lag pose to an internally piloted, manually landed UAS. This study attempted to do so by evaluating pilot landing performance in a simulator with 0 ms, 240 ms, and 1000 ms of additional lag. Various measures were used, including a novel coding technique. Results indicated that 1000 ms of lag was unsafe by all measures. They also indicate that 240 ms of lag degrades performance, but participants were able to successfully land the simulated aircraft. This study showed the utility of using several measures to evaluate the effect of lag on landing performance and it helped demonstrate that while 1000 ms poses a high risk, 240 ms of lag may be a much more manageable risk. Future research suggested by this research includes: investigating lag between 240 ms and 1000 ms, introducing different weather phenomena, developing system lag training techniques for operators, and investigating the effect of aides such as predictive displays and autopilot-assisted recovery.

Longitudinal Stability of Social Competence Indicators in a Portuguese Sample: Q-Sort Profiles of Social Competence, Measures of Social Engagement, and Peer Sociometric Acceptance

ERIC Educational Resources Information Center

Santos, António J.; Vaughn, Brian E.; Peceguina, Inês; Daniel, João R.

2014-01-01

This study examines the temporal stability (over 3 years) of individual differences in 3 domains relevant to preschool children's social competence: social engagement/motivation, profiles of behavior and personality attributes characteristic of socially competent young children, and peer acceptance. Each domain was measured with multiple…

Empathic Technologies for Distance/Mobile Learning: An Empirical Research Based on the Unified Theory of Acceptance and Use of Technology (UTAUT)

ERIC Educational Resources Information Center

Isaias, Pedro; Reis, Francisco; Coutinho, Clara; Lencastre, Jose Alberto

2017-01-01

Purpose: This paper examines the acceptance, of a group of 79 students, of an educational forum, used for mobile and distance learning, that has been modified to include empathic characteristics and affective principles. Design/Methodology/Approach: With this study is proposed that the introduction of empathic and affective principles in…

Electronic adherence monitoring device performance and patient acceptability: a randomized control trial.

PubMed

Chan, Amy Hai Yan; Stewart, Alistair William; Harrison, Jeff; Black, Peter Nigel; Mitchell, Edwin Arthur; Foster, Juliet Michelle

2017-05-01

To investigate the performance and patient acceptability of an inhaler electronic monitoring device in a real-world childhood asthma population. Children 6 to 15 years presenting with asthma to the hospital emergency department and prescribed inhaled corticosteroids were included. Participants were randomized to receive a device with reminder features enabled or disabled for use with their preventer. Device quality control tests were conducted. Questionnaires on device acceptability, utility and ergonomics were completed at six months. A total of 1306 quality control tests were conducted; 84% passed pre-issue and 87% return testing. The most common failure reason was actuation under-recording. Acceptability scores were high, with higher scores in the reminder than non-reminder group (median, 5 th -95 th percentile: 4.1, 3.1-5.0 versus 3.7, 2.3-4.8; p < 0.001). Most (>90%) rated the device easy to use. Feedback was positive across five themes: device acceptability, ringtone acceptability, suggestions for improvement, effect on medication use, and effect on asthma control. This study investigates electronic monitoring device performance and acceptability in children using quantitative and qualitative measures. Results indicate satisfactory reliability, although failure rates of 13-16% indicate the importance of quality control. Favorable acceptability ratings support the use of these devices in children.

The Impact of Rendered Protein Meal Oxidation Level on Shelf-Life, Sensory Characteristics, and Acceptability in Extruded Pet Food

PubMed Central

Chanadang, Sirichat; Koppel, Kadri; Aldrich, Greg

2016-01-01

Simple Summary Sensory analysis was used to determine the changes due to the storage time on extruded pet food prepared from two different rendered protein meals: (i) beef meat and bone meal (BMBM); (ii) chicken byproduct meal (CPBM). Extrusion is a process where feed is pressed through a die in order to create shapes and increase digestibility. Descriptive sensory analysis using a human panel found an increase in undesirable sensory attributes (e.g., oxidized oil, rancid) in extruded pet food over storage time, especially the one prepared from chicken by product meal without antioxidants. The small increase in oxidized and rancid aromas of BMBM samples did not affect pet owners’ acceptability of the products. CPBM samples without antioxidants showed a notable increase in oxidized and rancid aroma over storage time and, thus, affected product acceptability negatively. This finding indicated that human sensory analysis can be used as a tool to track the changes of pet food characteristics due to storage, as well as estimate the shelf-life of the products. Abstract Pet foods are expected to have a shelf-life for 12 months or more. Sensory analysis can be used to determine changes in products and to estimate products’ shelf-life. The objectives of this study were to (1) investigate how increasing levels of oxidation in rendered protein meals used to produce extruded pet food affected the sensory properties and (2) determine the effect of shelf-life on pet owners’ acceptability of extruded pet food diet formulated without the use of preservative. Pet food diets contained beef meat bone meal (BMBM) and chicken byproduct meal (CBPM) in which the oxidation was retarded with ethoxyquin, mixed tocopherols, or none at all, and then extruded into dry pet foods. These samples represented low, medium, and high oxidation levels, respectively. Samples were stored for 0, 3, 6, 9, and 12 months at ambient temperature. Each time point, samples were evaluated by six highly trained descriptive panelists for sensory attributes related to oxidation. Samples without preservatives were chosen for the acceptability test, since the differences in sensory characteristics over storage time were more distinguishable in those samples. Pet owners evaluated samples for aroma, appearance and overall liking. Descriptive sensory analysis detected significant changes in oxidized-related sensory characteristics over storage time. However, the differences for CBPM samples were more pronounced and directional. The consumer study showed no differences in pet owners’ acceptability for BMBM samples. However, the noticeable increase in aroma characteristics (rancid aroma 0.33–4.21) in CBPM samples over storage time did have a negative effect on consumer’s liking (overall liking 5.52–4.95). PMID:27483326

Physics issues in diffraction limited storage ring design

NASA Astrophysics Data System (ADS)

Fan, Wei; Bai, ZhengHe; Gao, WeiWei; Feng, GuangYao; Li, WeiMin; Wang, Lin; He, DuoHui

2012-05-01

Diffraction limited electron storage ring is considered a promising candidate for future light sources, whose main characteristics are higher brilliance, better transverse coherence and better stability. The challenge of diffraction limited storage ring design is how to achieve the ultra low beam emittance with acceptable nonlinear performance. Effective linear and nonlinear parameter optimization methods based on Artificial Intelligence were developed for the storage ring physical design. As an example of application, partial physical design of HALS (Hefei Advanced Light Source), which is a diffraction limited VUV and soft X-ray light source, was introduced. Severe emittance growth due to the Intra Beam Scattering effect, which is the main obstacle to achieve ultra low emittance, was estimated quantitatively and possible cures were discussed. It is inspiring that better performance of diffraction limited storage ring can be achieved in principle with careful parameter optimization.

Eigenspace techniques for active flutter suppression

NASA Technical Reports Server (NTRS)

Garrard, William L.; Liebst, Bradley S.; Farm, Jerome A.

1987-01-01

The use of eigenspace techniques for the design of an active flutter suppression system for a hypothetical research drone is discussed. One leading edge and two trailing edge aerodynamic control surfaces and four sensors (accelerometers) are available for each wing. Full state control laws are designed by selecting feedback gains which place closed loop eigenvalues and shape closed loop eigenvectors so as to stabilize wing flutter and reduce gust loads at the wing root while yielding accepatable robustness and satisfying constrains on rms control surface activity. These controllers are realized by state estimators designed using an eigenvalue placement/eigenvector shaping technique which results in recovery of the full state loop transfer characteristics. The resulting feedback compensators are shown to perform almost as well as the full state designs. They also exhibit acceptable performance in situations in which the failure of an actuator is simulated.

Performance characteristics of two bioassays and high-performance liquid chromatography for determination of flucytosine in serum.

PubMed Central

St-Germain, G; Lapierre, S; Tessier, D

1989-01-01

We compared the accuracy and precision of two microbiological methods and one high-pressure liquid chromatography (HPLC) procedure used to measure the concentrations of flucytosine in serum. On the basis of an analysis of six standards, all methods were judged reliable within acceptable limits for clinical use. With the biological methods, a slight loss of linearity was observed in the 75- to 100-micrograms/ml range. Compared with the bioassays, the HPLC method did not present linearity problems and was more precise and accurate in the critical zone of 100 micrograms/ml. On average, results obtained with patient sera containing 50 to 100 micrograms of flucytosine per ml were 10.6% higher with the HPLC method than with the bioassays. Standards for the biological assays may be prepared in serum or water. PMID:2802566

Current status of cardiovascular surgery in Japan, 2013 and 2014: A report based on the Japan Cardiovascular Surgery Database 3. Coronary artery bypass surgery.

PubMed

Saito, Aya; Hirahara, Norimichi; Motomura, Noboru; Miyata, Hiroaki; Takamoto, Shinichi

2018-01-01

Data on isolated coronary artery bypass grafting (CABG) performed in 2013 and 2014, and registered in the Japan Cardiovascular Surgery Database were reviewed for preoperative characteristics, postoperative outcomes, and choice of graft material for the left anterior descending artery (LAD). Isolated CABG was performed off-pump in 54.7% of cases, and graft material for the LAD was left internal thoracic artery in 74.3% and right internal thoracic artery in 15.6%. Operative mortality was 2.0% in elective cases, 8.2% in emergency cases, and 3.0% overall. In elective cases, operative mortality was 1.1% for off-pump CABG compared with 3.0% for on-pump CABG. Clinical results of our isolated CABG were reasonable and acceptable.

Plasma-sprayed self-lubricating coatings

NASA Technical Reports Server (NTRS)

Nakamura, H. H.; Logan, W. R.; Harada, Y.

1982-01-01

One of the most important criterion for acceptable commercial application of a multiple phase composition is uniformity and reproducibility. This means that the performance characteristics of the coat - e.g., its lubricating properties, bond strength to the substrate, and thermal properties - can be readily predicted to give a desired performance. The improvement of uniformity and reproducibility of the coats, the oxidation behavior at three temperature ranges, the effect of bond coat and the effect of preheat treatment as measured by adhesive strength tests, coating examination procedures, and physical property measurements were studied. The following modifications improved the uniformity and reproducibility: (1) changes and closer control in the particle size range of the raw materials used, (2) increasing the binder content from 3.2% to 4.1% (dried weight), and (3) analytical processing procedures using step by step checking to assure consistency.

Precise calculations in simulations of the interaction of low energy neutrons with nano-dispersed media

NASA Astrophysics Data System (ADS)

Artem'ev, V. A.; Nezvanov, A. Yu.; Nesvizhevsky, V. V.

2016-01-01

We discuss properties of the interaction of slow neutrons with nano-dispersed media and their application for neutron reflectors. In order to increase the accuracy of model simulation of the interaction of neutrons with nanopowders, we perform precise quantum mechanical calculation of potential scattering of neutrons on single nanoparticles using the method of phase functions. We compare results of precise calculations with those performed within first Born approximation for nanodiamonds with the radius of 2-5 nm and for neutron energies 3 × 10-7-10-3 eV. Born approximation overestimates the probability of scattering to large angles, while the accuracy of evaluation of integral characteristics (cross sections, albedo) is acceptable. Using Monte-Carlo method, we calculate albedo of neutrons from different layers of piled up diamond nanopowder.

User acceptance of mobile commerce: an empirical study in Macau

NASA Astrophysics Data System (ADS)

Lai, Ivan K. W.; Lai, Donny C. F.

2014-06-01

This study aims to examine the positive and negative factors that can significantly explain user acceptance of mobile commerce (m-commerce) in Macau. A technology acceptance model for m-commerce with five factors is constructed. The proposed model is tested using data collected from 219 respondents. Confirmatory factor analysis is performed to examine the reliability and validity of the model, and structural equation modelling is performed to access the relationship between behaviour intention and each factor. The acceptance of m-commerce is influenced by factors including performance expectancy, social influence, facilitating conditions and privacy concern; while effort expectancy is insignificant in this case. The results of the study are useful for m-commerce service providers to adjust their strategies for promoting m-commerce services. This study contributes to the practice by providing a user technology acceptance model for m-commerce that can be used as a foundation for future research.

Administering Cognitive Tests Through Touch Screen Tablet Devices: Potential Issues.

PubMed

Jenkins, Amy; Lindsay, Stephen; Eslambolchilar, Parisa; Thornton, Ian M; Tales, Andrea

2016-10-04

Mobile technologies, such as tablet devices, open up new possibilities for health-related diagnosis, monitoring, and intervention for older adults and healthcare practitioners. Current evaluations of cognitive integrity typically occur within clinical settings, such as memory clinics, using pen and paper or computer-based tests. In the present study, we investigate the challenges associated with transferring such tests to touch-based, mobile technology platforms from an older adult perspective. Problems may include individual variability in technical familiarity and acceptance; various factors influencing usability; acceptability; response characteristics and thus validity per se of a given test. For the results of mobile technology-based tests of reaction time to be valid and related to disease status rather than extraneous variables, it is imperative the whole test process is investigated in order to determine potential effects before the test is fully developed. Researchers have emphasized the importance of including the 'user' in the evaluation of such devices; thus we performed a focus group-based qualitative assessment of the processes involved in the administration and performance of a tablet-based version of a typical test of attention and information processing speed (a multi-item localization task), to younger and older adults. We report that although the test was regarded positively, indicating that using a tablet for the delivery of such tests is feasible, it is important for developers to consider factors surrounding user expectations, performance feedback, and physical response requirements and to use this information to inform further research into such applications.

Changes on expected taste perception of probiotic and conventional yogurts made from goat milk after rapidly repeated exposure.

PubMed

Costa, M P; Balthazar, C F; Franco, R M; Mársico, E T; Cruz, A G; Conte, C A

2014-05-01

Goat milk yogurt is an excellent source of fatty acids, protein, and minerals; however, it is not well accepted by many consumers, due to its typical flavor derived from caprylic, capric, and caproic acids present in this milk and dairy products. Recently, the repeated-exposure test has been used to increase the consumption of particular foods. This methodology has been used to increase children's willingness to eat food in some settings and has also been used to reduce sodium in soup. Based on these considerations, the aim of this study was to investigate whether repeated exposures may increase acceptance of both goat milk yogurt and probiotic goat milk yogurt. In a pre-exposure session, a total of 45 panelists (28 females and 17 males) from southeastern Brazil, who were not used to consuming dairy goat milk, evaluated the expected taste perception and the perceived liking after tasting 3 yogurt preparations. Then, consumers were randomly divided into 3 groups and participated in rapidly repeated exposure sessions performed within 6 d. Each panelist consumed only the yogurt that he or she would be exposed to. The day after the exposure sessions, all panelists returned to participate in the postexposure session and were asked to evaluate acceptance, familiarity, and the "goaty taste" characteristic of each yogurt. Regarding the expected liking before tasting, results showed higher expectations for cow milk yogurt compared with goat milk yogurt, which proved that consumers were not familiar with the goat milk yogurt. Likewise, only cow milk yogurt presented high acceptance and familiarity rates, confirming that these panelists were used to consuming cow milk products. With respect to the rapidly repeated exposure, 6 d were enough to significantly increase the consumers' familiarity with goat milk yogurt and probiotic goat milk yogurt. However, this method was not suitable to significantly increase the acceptance of such products. Nonetheless, a correlation existed between the exposure sessions and the increase in acceptance of the exposure groups. Thus, hypothetically, the increasing of exposure sessions could be a strategy to increase goat milk product acceptance. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Consumer detection and acceptability of reduced-sodium bread.

PubMed

La Croix, Kimberly W; Fiala, Steven C; Colonna, Ann E; Durham, Catherine A; Morrissey, Michael T; Drum, Danna K; Kohn, Melvin A

2015-06-01

Bread is the largest contributor of Na to the American diet and excess Na consumption contributes to premature death and disability. We sought to determine the Na level at which consumers could detect a difference between reduced-Na bread and bread with typical Na content, and to determine if consumer sensory acceptability and purchase intent differed between reduced-Na bread and bread with typical Na content. Difference testing measured ability to detect differences in control bread and reduced-Na bread using two-alternative forced choice testing. Acceptability was measured using a nine-point hedonic scale and purchase intent was measured using a five-point purchase intent scale. Difference and acceptability testing were conducted in Portland, OR, USA in January 2013. Eighty-two consumers participated in difference testing and 109 consumers participated in acceptability testing. Consumers did not detect a difference in saltiness between the control bread and the 10 % reduced-Na bread, but did detect a difference between the control bread and bread reduced in Na content by 20 % and 30 %. Na reductions had no effect on consumer acceptability of sensory characteristics, including overall liking, appearance, aroma, flavour, sweetness, salt level and texture, or purchase intent. Reducing Na levels by up to 30 % in the sandwich bread tested did not affect consumer liking or purchase intent of the product. These results support national recommendations for small, incremental Na reductions in the food supply over time and assure bread manufacturers that sensory characteristics and consumer purchase intent of their products will be preserved after Na reductions occur.

Walking in the uncanny valley: importance of the attractiveness on the acceptance of a robot as a working partner.

PubMed

Destephe, Matthieu; Brandao, Martim; Kishi, Tatsuhiro; Zecca, Massimiliano; Hashimoto, Kenji; Takanishi, Atsuo

2015-01-01

The Uncanny valley hypothesis, which tells us that almost-human characteristics in a robot or a device could cause uneasiness in human observers, is an important research theme in the Human Robot Interaction (HRI) field. Yet, that phenomenon is still not well-understood. Many have investigated the external design of humanoid robot faces and bodies but only a few studies have focused on the influence of robot movements on our perception and feelings of the Uncanny valley. Moreover, no research has investigated the possible relation between our uneasiness feeling and whether or not we would accept robots having a job in an office, a hospital or elsewhere. To better understand the Uncanny valley, we explore several factors which might have an influence on our perception of robots, be it related to the subjects, such as culture or attitude toward robots, or related to the robot such as emotions and emotional intensity displayed in its motion. We asked 69 subjects (N = 69) to rate the motions of a humanoid robot (Perceived Humanity, Eeriness, and Attractiveness) and state where they would rather see the robot performing a task. Our results suggest that, among the factors we chose to test, the attitude toward robots is the main influence on the perception of the robot related to the Uncanny valley. Robot occupation acceptability was affected only by Attractiveness, mitigating any Uncanny valley effect. We discuss the implications of these findings for the Uncanny valley and the acceptability of a robotic worker in our society.

Walking in the uncanny valley: importance of the attractiveness on the acceptance of a robot as a working partner

PubMed Central

Destephe, Matthieu; Brandao, Martim; Kishi, Tatsuhiro; Zecca, Massimiliano; Hashimoto, Kenji; Takanishi, Atsuo

2015-01-01

The Uncanny valley hypothesis, which tells us that almost-human characteristics in a robot or a device could cause uneasiness in human observers, is an important research theme in the Human Robot Interaction (HRI) field. Yet, that phenomenon is still not well-understood. Many have investigated the external design of humanoid robot faces and bodies but only a few studies have focused on the influence of robot movements on our perception and feelings of the Uncanny valley. Moreover, no research has investigated the possible relation between our uneasiness feeling and whether or not we would accept robots having a job in an office, a hospital or elsewhere. To better understand the Uncanny valley, we explore several factors which might have an influence on our perception of robots, be it related to the subjects, such as culture or attitude toward robots, or related to the robot such as emotions and emotional intensity displayed in its motion. We asked 69 subjects (N = 69) to rate the motions of a humanoid robot (Perceived Humanity, Eeriness, and Attractiveness) and state where they would rather see the robot performing a task. Our results suggest that, among the factors we chose to test, the attitude toward robots is the main influence on the perception of the robot related to the Uncanny valley. Robot occupation acceptability was affected only by Attractiveness, mitigating any Uncanny valley effect. We discuss the implications of these findings for the Uncanny valley and the acceptability of a robotic worker in our society. PMID:25762967

V/STOLAND avionics system flight-test data on a UH-1H helicopter

NASA Technical Reports Server (NTRS)

Baker, F. A.; Jaynes, D. N.; Corliss, L. D.; Liden, S.; Merrick, R. B.; Dugan, D. C.

1980-01-01

The flight-acceptance test results obtained during the acceptance tests of the V/STOLAND (versatile simplex digital avionics system) digital avionics system on a Bell UH-1H helicopter in 1977 at Ames Research Center are presented. The system provides navigation, guidance, control, and display functions for NASA terminal area VTOL research programs and for the Army handling qualities research programs at Ames Research Center. The acceptance test verified system performance and contractual acceptability. The V/STOLAND hardware navigation, guidance, and control laws resident in the digital computers are described. Typical flight-test data are shown and discussed as documentation of the system performance at acceptance from the contractor.

Physicochemical and Sensory Characteristics of Sponge Cakes with Rubus coreanus Powder

PubMed Central

Lee, Jun Ho

2015-01-01

To develop new type of sponge cake, the effects of partial (0~40%) replacement with Rubus coreanus powder (RCP) on the quality characteristics of sponge cakes were investigated. The pH level and moisture content ranged from 4.05~8.23 and 28.49~36.59, respectively, and significantly decreased upon addition of RCP (P<0.05). Baking loss rate and cake firmness significantly increased with higher RCP content in the formulation, whereas morphological characteristics of cakes such as height, volume, and symmetry indices significantly decreased (P<0.05). For crumb color values, L*- and b*-values significantly decreased while a*-value significantly increased as a result of RCP substitution (P<0.05). Hedonic sensory results indicated that sponge cakes supplemented with 30~40% RCP showed the most favorable acceptance scores for most of the sensory attributes evaluated. Overall, Rubus coreanus sponge cake could be developed with comparable physicochemical qualities without sacrificing consumer acceptability. PMID:26451358

Physicochemical and Sensory Characteristics of Sponge Cakes with Rubus coreanus Powder.

PubMed

Lee, Jun Ho

2015-09-01

To develop new type of sponge cake, the effects of partial (0~40%) replacement with Rubus coreanus powder (RCP) on the quality characteristics of sponge cakes were investigated. The pH level and moisture content ranged from 4.05~8.23 and 28.49~36.59, respectively, and significantly decreased upon addition of RCP (P<0.05). Baking loss rate and cake firmness significantly increased with higher RCP content in the formulation, whereas morphological characteristics of cakes such as height, volume, and symmetry indices significantly decreased (P<0.05). For crumb color values, L*- and b*-values significantly decreased while a*-value significantly increased as a result of RCP substitution (P<0.05). Hedonic sensory results indicated that sponge cakes supplemented with 30~40% RCP showed the most favorable acceptance scores for most of the sensory attributes evaluated. Overall, Rubus coreanus sponge cake could be developed with comparable physicochemical qualities without sacrificing consumer acceptability.

Understanding the Characteristics of the Sexual Harasser.

ERIC Educational Resources Information Center

Sundt, Melora

1996-01-01

Information on characteristics of harassers can help policymakers and educators develop more effective prevention programs. Results of a survey of 336 men and 333 women are presented in terms of institutional size, satisfaction with institutional response, views on the acceptability of harassment, beliefs related to harassment, and types of…

SIMULATION IN TRAINING AND EDUCATION.

ERIC Educational Resources Information Center

CRAWFORD, MEREDITH P.

THE KEY CONCEPTS OF SYSTEM AND SIMULATION AS THEY ARE APPLIED TO TRAINING AND EDUCATION ARE DISCUSSED. THE GENERAL CHARACTERISTICS OF MACHINE-ASCENDANT SYSTEMS THAT FACILITATE THE ORDERLY DESIGN PROCESS OF TRAINING SIMULATORS ARE PRESENTED--(1) PURPOSE OF THE SYSTEM AND LIMITS OF ACCEPTABLE HUMAN BEHAVIOR, (2) RESPONSE CHARACTERISTICS OF THE…

Attenuation and Enhancement of Compliance with Experimental Demand Characteristics

ERIC Educational Resources Information Center

Navarick, Douglas J.

2007-01-01

College students chose between reinforcement schedules in which a key press produced a cartoon video followed by nonreinforcement. The experimenter introduced a demand characteristic by stating a preference for choosing one schedule while indicating that the other schedule was also acceptable. With identical schedules (25 s of reinforcement, 5 s…

Post-abortion care and voluntary HIV counselling and testing--an example of integrating HIV prevention into reproductive health services.

PubMed

Rasch, Vibeke; Yambesi, Fortunata; Massawe, Siriel

2006-05-01

To assess the acceptance and outcome of voluntary HIV counselling and testing (VCT) among women who had an unsafe abortion. 706 women were provided with post-abortion contraceptive service and offered VCT. We collected data on socioeconomic characteristics and contraceptive use and determined the HIV status of those who accepted VCT. Using a nested case-control design, we compared women who accepted HIV testing with women who did not. To study the association between socioeconomic factors, HIV testing acceptance and condom use in more detail, we did stratified analyses based on age and marital status. 58% of the women who had an unsafe abortion accepted HIV testing. Women who earned an income were more likely to accept testing than housewives. Women who accepted testing were more likely to accept using a condom. The HIV prevalence rate was 19% among single women aged 20-24 years and 25% among single women aged 25-45 years. HIV testing and condoms were accepted by most women who had an unsafe abortion. The poor reproductive health of these women could be improved by good post-abortion care that includes contraceptive counselling, VCT and condom promotion.

77 FR 51880 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria AGENCY: Nuclear Regulatory Commission... construction activities through inspections, tests, analyses, and acceptance criteria (ITAAC) under a combined... inspections, tests, or analyses were performed as required, or that acceptance criteria are met, and to notify...

Effect of hot water treatment of beef trimmings on processing characteristics and eating quality of ground beef.

PubMed

Pietrasik, Z; Gaudette, N J; Klassen, M

2016-03-01

The effect of hot water treatment of beef trimmings on the processing characteristics, shelf-life and consumer acceptability of ground beef was evaluated. Hot water treatment (85°C for 40s) substantially enhanced the microbial quality of trimmings during refrigerated storage and this was independent of the fat level of the trimmings. Treatment had no effect on the oxidative stability of trimmings stored up to 7days, ground beef displayed in a retail cabinet for up to 3days, and had minimal effect on textural properties. Instrumental results demonstrate that ground beef from hot water treated trimmings was slightly lighter and tended to have less red color compared to non-treated beef. These color differences did not impact the consumer acceptance of raw patties, and in addition, hot water treatment did not significantly affect the consumer acceptability of cooked patty attributes. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

The effect of image alterations on identification using palmar flexion creases.

PubMed

Cook, Tom; Sutton, Raul; Buckley, Kevan

2013-11-01

Palmprints are identified using matching of minutia points, which can be time consuming for fingerprint experts and in database searches. This article analyzes the operational characteristics of a palmar flexion crease (PFC) identification software tool, using a dataset of 10 replicates of 100 palms, where the user can label and match palmar line features. Results show that 100 palmprint images modified 10 times each using rotation, translation, and additive noise, mimicking some of the characteristics found in crime scene palmar marks, can be identified with a 99.2% genuine acceptance rate and 0% false acceptance rate when labeled within 3.5 mm of the PFC. Partial palmprint images can also be identified using the same method to filter the dataset prior to traditional matching, while maintaining an effective genuine acceptance rate. The work shows that identification using PFCs can improve palmprint identification through integration with existing systems, and through dedicated palmprint identification applications. © 2013 American Academy of Forensic Sciences.

Awareness and Acceptability of Pre-exposure HIV Prophylaxis Among Men Who have Sex with Men in Baltimore.

PubMed

Fallon, Susan A; Park, Ju Nyeong; Ogbue, Christine Powell; Flynn, Colin; German, Danielle

2017-05-01

This paper assessed characteristics associated with awareness of and willingness to take pre-exposure prophylaxis (PrEP) among Baltimore men who have sex with men (MSM). We used data from BESURE-MSM3, a venue-based cross-sectional HIV surveillance study conducted among MSM in 2011. Multivariate regression was used to identify characteristics associated with PrEP knowledge and acceptability among 399 participants. Eleven percent had heard of PrEP, 48% would be willing to use PrEP, and none had previously used it. In multivariable analysis, black race and perceived discrimination against those with HIV were significantly associated with decreased awareness, and those who perceived higher HIV discrimination reported higher acceptability of PrEP. Our findings indicate a need for further education about the potential utility of PrEP in addition to other prevention methods among MSM. HIV prevention efforts should address the link between discrimination and potential PrEP use, especially among men of color.

Shy, but funny? Examining peer-valued characteristics as moderators of the associations between anxious-withdrawal and peer outcomes during early adolescence.

PubMed

Markovic, Andrea; Bowker, Julie C

2015-04-01

Research has revealed significant heterogeneity in the group-level peer outcomes associated with anxious-withdrawal, but little is known about possible sources of this heterogeneity during early adolescence. This study of 271 young adolescents (49 % female; M age = 11.54 years) examined whether the concurrent and short-term longitudinal (3 month period) associations between peer-nominated anxious-withdrawn behaviors and three group-level peer outcomes (overt victimization, peer acceptance, popularity) varied as a function of peer-valued characteristics (humor, prosocial behavior, physical attractiveness, athletic ability) and gender, after accounting for the effects of involvement in mutual friendships. Regression analyses revealed that the associations between anxious-withdrawal and peer outcomes were moderated by peer-valued characteristics and, in many cases, gender. For example, anxious-withdrawal was related positively to overt victimization for all adolescents who were high in prosocial behavior. But, anxious-withdrawal was related negatively to popularity for adolescent boys who were high in prosocial behavior and adolescent girls who were low in prosocial behavior. Anxious-withdrawal also predicted increases in acceptance for adolescent girls who were high in humor, but decreases in acceptance for adolescent boys who were high in humor. Several additional moderator effects were found for boys only. The findings highlight the importance of considering the unique constellation of characteristics displayed by anxious-withdrawn young adolescents in studies on peer experiences at the group-level of social complexity.

Performance of the MTR core with MOX fuel using the MCNP4C2 code.

PubMed

Shaaban, Ismail; Albarhoum, Mohamad

2016-08-01

The MCNP4C2 code was used to simulate the MTR-22 MW research reactor and perform the neutronic analysis for a new fuel namely: a MOX (U3O8&PuO2) fuel dispersed in an Al matrix for One Neutronic Trap (ONT) and Three Neutronic Traps (TNTs) in its core. Its new characteristics were compared to its original characteristics based on the U3O8-Al fuel. Experimental data for the neutronic parameters including criticality relative to the MTR-22 MW reactor for the original U3O8-Al fuel at nominal power were used to validate the calculated values and were found acceptable. The achieved results seem to confirm that the use of MOX fuel in the MTR-22 MW will not degrade the safe operational conditions of the reactor. In addition, the use of MOX fuel in the MTR-22 MW core leads to reduce the uranium fuel enrichment with (235)U and the amount of loaded (235)U in the core by about 34.84% and 15.21% for the ONT and TNTs cases, respectively. Copyright © 2016 Elsevier Ltd. All rights reserved.

5 CFR 531.409 - Acceptable level of competence determinations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Acceptable level of competence... REGULATIONS PAY UNDER THE GENERAL SCHEDULE Within-Grade Increases § 531.409 Acceptable level of competence... delegated shall determine which employees are performing at an acceptable level of competence. (b) Basis for...

46 CFR 164.013-5 - Acceptance tests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... described in UL 1191, as appropriate, are performed on a minimum of five samples in each of the lightest and darkest colors submitted for acceptance by a recognized laboratory accepted under § 164.019. ...

46 CFR 164.013-5 - Acceptance tests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... described in UL 1191, as appropriate, are performed on a minimum of five samples in each of the lightest and darkest colors submitted for acceptance by a recognized laboratory accepted under § 164.019. ...

46 CFR 164.013-5 - Acceptance tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... described in UL 1191, as appropriate, are performed on a minimum of five samples in each of the lightest and darkest colors submitted for acceptance by a recognized laboratory accepted under § 164.019. ...

Acceptability of Dry Dog Food Visual Characteristics by Consumer Segments Based on Overall Liking: a Case Study in Poland.

PubMed

Gomez Baquero, David; Koppel, Kadri; Chambers, Delores; Hołda, Karolina; Głogowski, Robert; Chambers, Edgar

2018-05-23

Sensory analysis of pet foods has been emerging as an important field of study for the pet food industry over the last few decades. Few studies have been conducted on understanding the pet owners’ perception of pet foods. The objective of this study is to gain a deeper understanding on the perception of the visual characteristics of dry dog foods by dog owners in different consumer segments. A total of 120 consumers evaluated the appearance of 30 dry dog food samples with varying visual characteristics. The consumers rated the acceptance of the samples and associated each one with a list of positive and negative beliefs. Cluster Analysis, ANOVA and Correspondence Analysis were used to analyze the consumer responses. The acceptability of the appearance of dry dog foods was affected by the number of different kibbles present, color(s), shape(s), and size(s) of the kibbles in the product. Three consumer clusters were identified. Consumers rated highest single-kibble samples of medium sizes, traditional shapes, and brown colors. Participants disliked extra-small or extra-large kibble sizes, shapes with high-dimensional contrast, and kibbles of light brown color. These findings can help dry dog food manufacturers to meet consumers’ needs with increasing benefits to the pet food and commodity industries.

Influence of freezing and thawing on the hydration characteristics, quality, and consumer acceptance of whole muscle beef injected with solutions of salt and phosphate.

PubMed

Pietrasik, Z; Janz, J A M

2009-03-01

Effects of salt/phosphate injection level (112% or 125% pump), salt level (0.5% or 1.5% salt), and freezing/thawing on hydration characteristics, quality, and consumer acceptance of beef semitendinosus were investigated. All enhancement treatments decreased shear force by 25-35%, but negatively affected colour. Increased salt concentration yielded lower purge and cooking losses, and higher water holding capacity. The higher injection level reduced water binding properties, however, the loss in functionality with higher water addition was overcome with increased salt content. Freezing and subsequent thawing was generally detrimental to colour and water binding properties and tended to increase shear force. Freezing and subsequent thawing did not affect fluid release in steaks held for 1 day before analysis, but resulted in decreased water retention in samples held for 7 days. Holding vacuum packaged steaks for 7 days generally increased package purge and negatively affected colour parameters, although water binding characteristics were improved. Consumer panel results demonstrated a negative effect on juiciness and tenderness where meat subject to low salt/high injection was frozen then thawed - the low salt level was insufficient to maintain any positive effect of injection treatment. In general, salt/phosphate injection improved product acceptability and increased willingness to purchase.

Investigations of the environmental acceptability of fluorocarbon alternatives to chlorofluorocarbons.

PubMed Central

McFarland, M

1992-01-01

Chlorofluorocarbons (CFCs) are currently used in systems for preservation of perishable foods and medical supplies, increasing worker productivity and consumer comfort, conserving energy and increasing product reliability. As use of CFCs is phased out due to concerns of ozone depletion, a variety of new chemicals and technologies will be needed to serve these needs. In choosing alternatives, industry must balance concerns over safety and environmental acceptability and still meet the preformance characteristics of the current technology, the only viable alternatives meeting the safety, performance, and environmental requirements for the remaining 40% of demand are fluorocarbons, hydrochlorofluorocarbons (HCFs), and hydrofluorocarbons (HFCs). HCFCs and HFCs possess many of the desirable properties of the CFCs, but because of the, hydrogen, they results in shorter atmospheric lifetimes compared to CFCs and reduces their potential to contribute to stratospheric ozone depletion or global warming; HFCs do not contain chlorine and have no potential to destroy ozone. This paper provides an overview of challenges faced by industry, regulators, and society in general in continuing to meet societal needs and consumer demands while reducing risk to the enviroment without compromising consumer or worker safety. PMID:11607257

A plea for the development of an universally accepted modular tooth wear evaluation system.

PubMed

Wetselaar, P; Faris, A; Lobbezoo, F

2016-11-03

Tooth wear is considered an increasing oral health problem. Due to its multifactorial nature, recognizing and diagnosing of tooth wear is difficult but nevertheless important. Over the years, a wide variety of evaluation systems has been developed, yet none of them is universally accepted. This has implications for both research and clinical practice. This paper describes an in-depth analysis of four commonly used tooth wear evaluation systems, namely, the Eccles index, the Tooth Wear Index, the Lussi index, and the Basic Erosive Wear Examination. Comparing those systems revealed that despite several similarities, they differ considerably from each other. Notably, all four systems have their specific advantages and disadvantages. However, neither one of them meets all necessary characteristics of a hypothetical, broadly applicable tooth wear evaluation system. In fact, it is not realistic that a single system qualifies for all purposes (for example, diagnosing or monitoring individual patients, performing epidemiological studies, etc.). As a potentially feasible solution for this issue, the development of an evaluation system is recommended that consists of multiple, coherent modules, which cover different purposes.

The authentic worker's well-being and performance: the relationship between authenticity at work, well-being, and work outcomes.

PubMed

van den Bosch, Ralph; Taris, Toon W

2014-01-01

Previous research on authenticity has mainly focused on trait conceptualizations of authenticity (e.g., Wood et al., 2008), whereas in specific environments (e.g., at work) state conceptualizations of authenticity (cf. Van den Bosch & Taris, 2013) are at least as relevant. For example, working conditions are subject to change, and this could well have consequences for employees' perceived level of authenticity at work. The current study employs a work-specific, state-like conceptualization of authenticity to investigate the relations between authenticity at work, well-being, and work outcomes. A series of ten separate hierarchical regression analyses using data from 685 participants indicated that after controlling for selected work characteristics and demographic variables, authenticity at work accounted for on average 11% of the variance of various wellbeing and work outcomes. Of the three subscales of authenticity at work (i.e., authentic living, self-alienation, and accepting influence), self-alienation was the strongest predictor of outcomes, followed by authentic living and accepting external influence, respectively. These findings are discussed in the light of their practical and theoretical implications.

Parental acceptance, postpartum depression, and maternal sensitivity: mediating and moderating processes.

PubMed

Crockenberg, Susan C; Leerkes, Esther M

2003-03-01

Mothers (n = 92), fathers (n = 84), and their infants (60% male) participated in a longitudinal study of postpartum depression and maternal sensitivity. Mothers completed questionnaire measures of remembered parental acceptance, depressive symptoms, and infant distress to novelty and limits. Mothers and partners reported on marital aggression and avoidance. Maternal sensitivity was observed in the laboratory at 6 months. Characteristics of mothers, partners, and infants combined to predict postpartum depression and maternal sensitivity. Remembered parental rejection predicted postpartum depressive symptoms with prenatal depression controlled; self-esteem mediated this effect. Paternal acceptance buffered against postpartum depression when infants were highly reactive and when partners were aggressive. Paternal acceptance reduced the impact of postpartum depression on maternal sensitivity; having an aggressive marital partner exacerbated the effect.

COMPARISON OF NONLINEAR DYNAMICS OPTIMIZATION METHODS FOR APS-U

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Y.; Borland, Michael

Many different objectives and genetic algorithms have been proposed for storage ring nonlinear dynamics performance optimization. These optimization objectives include nonlinear chromaticities and driving/detuning terms, on-momentum and off-momentum dynamic acceptance, chromatic detuning, local momentum acceptance, variation of transverse invariant, Touschek lifetime, etc. In this paper, the effectiveness of several different optimization methods and objectives are compared for the nonlinear beam dynamics optimization of the Advanced Photon Source upgrade (APS-U) lattice. The optimized solutions from these different methods are preliminarily compared in terms of the dynamic acceptance, local momentum acceptance, chromatic detuning, and other performance measures.

Different Perspectives on Technology Acceptance: The Role of Technology Type and Age

NASA Astrophysics Data System (ADS)

Arning, Katrin; Ziefle, Martina

Although eHealth technologies offer an enormous potential to improve healthcare, the knowledge about key determinants of acceptance for eHealth technology is restricted. While the underlying technology of eHealth technologies and Information and Communication technology (ICT) is quite similar, utilization contexts and using motives are quite different. In order to explore the role of technology type on acceptance, we contrasted central application characteristics of both technology types using the scenario technique. A questionnaire was administered (n = 104) measuring individual variables (age, gender) and attitudes regarding an eHealth application (blood sugar meter) in contrast to an ICT device (Personal Digital Assistant, PDA). Older users basically approved the utilization of health-related technologies and perceived lower usability barriers. In addition, we identified main utilization motives of eHealth technology and technology-specific acceptance patterns, especially regarding issues of data safety in the eHealth context. Effects of age and gender in acceptance ratings suggest a differential perspective on eHealth acceptance. Finally, practical interventions were derived in order to support eHealth device design and to promote acceptance of eHealth technology.

Testing and Selection of Fire-Resistant Materials for Spacecraft Use

NASA Technical Reports Server (NTRS)

Friedman, Robert; Jackson, Brian; Olson, Sandra

2000-01-01

Spacecraft fire-safety strategy emphasizes prevention, mostly through the selection of onboard items classified accord- ing to their fire resistance. The principal NASA acceptance tests described in this paper assess the flammability of materials and components under "worst-case" normal-gravity conditions of upward flame spread in controlled-oxygen atmospheres. Tests conducted on the ground, however, cannot duplicate the unique fire characteristics in the nonbuoyant low-gravity environment of orbiting spacecraft. Research shows that flammability an fire-spread rates in low gravity are sensitive to forced convection (ventilation flows) and atmospheric-oxygen concentration. These research results are helping to define new material-screening test methods that will better evaluate material performance in spacecraft.

FPGA implementation of current-sharing strategy for parallel-connected SEPICs

NASA Astrophysics Data System (ADS)

Ezhilarasi, A.; Ramaswamy, M.

2016-01-01

The attempt echoes to evolve an equal current-sharing algorithm over a number of single-ended primary inductance converters connected in parallel. The methodology involves the development of state-space model to predict the condition for the existence of a stable equilibrium portrait. It acquires the role of a variable structure controller to guide the trajectory, with a view to circumvent the circuit non-linearities and arrive at a stable performance through a preferred operating range. The design elicits an acceptable servo and regulatory characteristics, the desired time response and ensures regulation of the load voltage. The simulation results validated through a field programmable gate array-based prototype serves to illustrate its suitability for present-day applications.

[Bladder endometriosis. Diagnostic and therapeutic approximation].

PubMed

Monllor Gisbert, J; Merino Hernaez, C; Olivier Gómez, C; Carballido Rodríguez, J

1991-01-01

Endometriosis is defined by the presence of functionally active endometria in ectopic position; so when its clinical behaviour adopts the characteristics of tumoration, endometrioma is accepted as an alternative name. Location of this pathology in the urinary apparatus is uncommon in terms of incidence, since the bladder is a selected site. This condition implies a high morbidity rate because it requires a high level of suspicion in order to be diagnosed. It is acknowledged that no image study (CAT, Echography, MNR, etc.) is pathognomonic for endometriosis and it is necessary to perform endoscopy and biopsy to achieve a correct diagnosis. The paper includes the strategy to follow, both with regard to diagnosis and the current therapeutic approaches.

Spontaneous assembly of HSP90 inhibitors at water/octanol interface: A molecular dynamics simulation study

NASA Astrophysics Data System (ADS)

Zolghadr, Amin Reza; Boroomand, Samaneh

2017-02-01

Drug absorption at an acceptable dose depends on the pair of solubility and permeability. There are many potent therapeutics that are not active in vivo, presumably due to the lack of capability to cross the cell membrane. Molecular dynamics simulation of radicicol, diol-radicicol, cyclopropane-radicicol and 17-DMAG were performed at water/octanol interface to suggest interfacial activity as a physico-chemical characteristic of these heat shock protein 90 (HSP90) inhibitors. We have observed that orally active HSP90 inhibitors form aggregates at the water/octanol and DPPC-lipid/water interfaces by starting from an initial configuration with HSP90 inhibitors embedded in the water matrix.

Solar drying and organoleptic characteristics of two tropical African fish species using improved low-cost solar driers.

PubMed

Mustapha, Moshood K; Ajibola, Taiye B; Salako, Abdulbashir F; Ademola, Sunmola K

2014-05-01

This study was done to evaluate the drying performance, efficiency, and effectiveness of five different types of improved low-cost solar driers in terms of moisture loss from two tropical African fish species Clarias gariepinus (African sharp tooth catfish) and Oreochromis niloticus (Nile tilapia) and testing the organoleptic characteristics of the dried samples. The driers used were made from plastic, aluminum, glass, glass with black igneous stone, and mosquito net, with traditional direct open-sun drying as a control. A significant (P < 0.05) decrease in weight resulting from moisture loss in the two fish species was observed in all the driers, with the highest reduction occurring in the glass drier containing black stone. The rate of weight loss was faster in the first 4 days of drying with black stone-inserted glass drier showing the fastest drying rate with a constant weight in C. gariepinus attained on the 11th day and in O. niloticus on the eighth day. The slowest drier was plastic where a constant weight of the species were recorded on and 13th day and 11th day, respectively. Volunteers were used to assess the organoleptic characteristics of the dried samples and they showed lowest acceptability for the open-sun drying, while samples from the glass drier containing black stone had the highest acceptability in terms of the taste, flavor, appearance, texture, odor, palatability, and shelf-life. The low-cost solar driers were effective found in removing water from the fish resulting in significant loss of weight and moisture. The highest drying time, efficient performance, drying effectiveness, and high acceptability of the organoleptic parameters of the dried products from the black stone-inserted glass drier were due to the ability of the glass and the black stone to retain, transmit, and radiate heat to the fish sample all the time (day and night). These low-cost driers are simple to construct, materials for its construction readily available, easy to maintain and operate, hygienic in use, reliable, effective, occupies less area, dry products faster with increased shelf-life, save man-hour, user-friendly, use renewable energy, protect the drying samples from filthiness, wetness, and invasion by pests, insects, and microbes, with well-dried, high-quality, and better preserved final products. The adoption and use any of these low-cost solar driers by artisanal fishermen and general household in sub-Saharan Africa will not only help in reducing post catch losses, but also ensure food safety and security as there is abundant solar energy in these sub-Saharan African tropical countries for the operation of the driers.

Praise Research Trends and Future Directions: Characteristics and Teacher Training

ERIC Educational Resources Information Center

Floress, Margaret T.; Beschta, Shelby L.; Meyer, Kari L.; Reinke, Wendy M.

2017-01-01

Teacher praise is an effective classroom management tool. Training teachers to increase their use of praise can improve student disruptive and off-task behavior. The purpose of this article is to examine different characteristics of praise and the training methods used in the literature. Training methods with positive treatment acceptability and…

The Future of Economic Development on the Galveston County Mainland: A Challenge Based upon Community Perceptions of Leadership Characteristics and Responsibilities.

ERIC Educational Resources Information Center

Vaughan, Jerry L.

A community survey conducted in Galveston County, Texas identified four attributes or characteristics of community leadership: problem-solving effectiveness; ability and willingness to accept responsibility; leadership cooperation; and leadership coordination of organizations. The leadership patterns found in Galveston County will effect the…

Submission Patterns: "Measurement and Evaluation in Counseling and Development" Author and Article Characteristics from 1990 to 2009

ERIC Educational Resources Information Center

Erford, Bradley T.; Miller, Emily M.; Duncan, Kelly; Erford, Breann M.

2010-01-01

Submission patterns of articles accepted for publication in "Measurement and Evaluation in Counseling and Development" from 1990 to 2009 are reviewed. Trends are analyzed in article content (i.e., type, issue, statistical procedures) and author demographic characteristics (e.g., sex, nation of domicile, professional title, departmental…

The Adoption of Systems Innovations in Educational Organizations: A Case Study of Operation Guidance.

ERIC Educational Resources Information Center

Kester, Ralph J.; Howard, John, Jr.

To identify factors which affect the acceptance of innovation in school organizations, a career development product entitled Operation Guidance (OG) was the object of a case study. Five basic organizational characteristics were used to roughly quantify attributes of the organization of the six schools studied. The characteristics were:…

I'll Have What She's Having: The Impact of Model Characteristics on Children's Food Choices

ERIC Educational Resources Information Center

Frazier, Brandy N.; Gelman, Susan A.; Kaciroti, Niko; Russell, Joshua W.; Lumeng, Julie C.

2012-01-01

This research investigates children's use of social categories in their food selection. Across three studies, we presented preschoolers with sets of photographs that contrasted food-eating models with different characteristics, including model gender, race (Black, White), age (child or adult), and/or expression (acceptance or rejection of the…

Physico-chemical characteristics of defatted rice bran and its utilization in a bakery product.

PubMed

Sairam, Sudha; Gopala Krishna, A G; Urooj, Asna

2011-08-01

Defatted rice bran (DRB), a byproduct of rice milling is a rich source of dietary fiber and minerals. In the present study, the physico-chemical characteristics, antioxidant potential of defatted rice bran (Laboratory-LDRB and Commercial -CDRB) and its utilization in preparation of bread were studied. The effect of incorporation of CDRB at varying levels (5, 10 & 15%) on the quality characteristics of bread including physical, rheological and sensory attributes were evaluated and the dietary fiber content and antioxidant activity were determined. The results indicated that LDRB had better nutrient profile, physical and antioxidant properties than CDRB. On the basis of physical characteristics, breads with 5% and 10% CDRB were found to be acceptable as such and those containing 15% were acceptable with addition of bread improvers. The dietary fiber content and total antioxidative activity of bread increased with increasing levels of CDRB, which also improved the shelf life. The results reveal that DRB can be incorporated in breads upto 10% and 15% as such or with bread improvers respectively, as source of fiber and natural antioxidant, as a functional ingredient.

Making Judgments: How Blame Mediates the Influence of Rape Myth Acceptance in Police Response to Sexual Assault.

PubMed

Venema, Rachel M

2016-08-01

As research continues to describe negative experiences and high case attrition within sexual assault cases reported to the police, it is important to better understand the role of first-responding police officers. This study surveyed a sample of sworn police officers ( N = 174) from one department in a midsized city in the Great Lakes region to examine the effect of individual police officer characteristics, rape myth acceptance (RMA), attributions of blame, and case characteristics from a hypothetical vignette, on officer perceptions of a "good" case and behavioral intentions. Results found that although RMA predicts both perceptions of the case and behavioral intentions to respond in ways indicative of perceived seriousness, RMA is mediated by attributions of suspect blame. Victim alcohol use was found to decrease an officer's likelihood of responding more vigorously, showing less likelihood of calling a detective or arresting the suspect, if identified. Future research should begin to connect not only case characteristics but also individual police officer characteristics, attitudes, and attributions of blame, with real case outcomes, in addition to hypothetical scenarios.

Consumer acceptance of technology-based food innovations: lessons for the future of nutrigenomics.

PubMed

Ronteltap, A; van Trijp, J C M; Renes, R J; Frewer, L J

2007-07-01

Determinants of consumer adoption of innovations have been studied from different angles and from the perspectives of various disciplines. In the food area, the literature is dominated by a focus on consumer concern. This paper reviews previous research into acceptance of technology-based innovation from both inside and outside the food domain, extracts key learnings from this literature and integrates them into a new conceptual framework for consumer acceptance of technology-based food innovations. The framework distinguishes 'distal' and 'proximal' determinants of acceptance. Distal factors (characteristics of the innovation, the consumer and the social system) influence consumers' intention to accept an innovation through proximal factors (perceived cost/benefit considerations, perceptions of risk and uncertainty, social norm and perceived behavioural control). The framework's application as a tool to anticipate consumer reaction to future innovations is illustrated for an actual technology-based innovation in food science, nutrigenomics (the interaction between nutrition and human genetics).

Consumer acceptability of gluten-free cookies containing raw cooked and germinated pinto bean flours.

PubMed

Simons, Courtney Wayne; Hall, Clifford

2018-01-01

Beany and grassy flavors in raw edible bean flours reduce consumer acceptability of bean-based baked products. In order to improve consumer acceptability, beans may be further processed by cooking and germination. However, these operations drive up the cost of end-products. Therefore, it is necessary to develop formulations, using raw edible bean flours that have acceptable sensory attributes. In this study, cooked, germinated, and germinated/steam-blanched (GSB) pinto bean flours were used to make gluten-free cookies, and their sensory characteristics evaluated to determine how their consumer acceptability scores compared. Taste panelists (31) graded cookies made from raw pinto beans with an overall value of 6 on a 9-point hedonic scale ( p  < .05). This rating was not significantly different from cookies formulated with germinated and GSB flours. Therefore, gluten-free cookies can be made using raw pinto bean flours at a 40% inclusion level, with similar sensory characteristics as those prepared with flours treated by cooking and germination. Instrumental measurement of cookie hardness and color showed no significant difference in hardness, but significant differences in color. The germinated bean flour produced cookies with a significantly lower L* value and significantly higher a*, b*, Chroma and hue values compared to the other treatments. There was no significant difference in the cookie spread ratio. Proximate composition, water absorption index (WAI), water solubility index (WSI) and gelatinization properties of the flour treatments were characterized.

Successful prediction and performance in waterflooding Wesson Hogg Sand Unit, Ouachita County, Arkansas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clanton, H.W.

1966-01-01

By unitization and waterflooding, the Hogg Sand reservoir will increase ultimate recovery by 21,500,000 bbl. The predicted ultimate recovery of 1,103 bbl per acre-ft is considered well above average for waterflood projects. Predicted reservoir performance has closely paralleled actual performance in many areas of investigation, viz., recovery in bbl per acre-ft, flood pattern, water percent at depletion, and attaining a reservoir pressure which would sustain production by natural flow. A departure from the generally accepted practices utilized in waterflooding has not been a detriment in successfully flooding the Hogg Sand reservoir. The major factors contributing to the high degree ofmore » success can be found in the excellent reservoir characteristics. Operating costs of $0.2429 per bbl, including amortization, is approximately 1/4 of that normally expected in waterfloods. Remaining oil after flooding is indicated to be 49% of the oil in place and clearly indicates a need for concentrated efforts in the field of tertiary recovery.« less

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stoessel, Chris

2013-11-13

This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency ofmore » a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.« less

Design and Analysis of a Novel Centrifugal Braking Device for a Mechanical Antilock Braking System.

PubMed

Yang, Cheng-Ping; Yang, Ming-Shien; Liu, Tyng

2015-06-01

A new concept for a mechanical antilock braking system (ABS) with a centrifugal braking device (CBD), termed a centrifugal ABS (C-ABS), is presented and developed in this paper. This new CBD functions as a brake in which the output braking torque adjusts itself depending on the speed of the output rotation. First, the structure and mechanical models of the entire braking system are introduced and established. Second, a numerical computer program for simulating the operation of the system is developed. The characteristics of the system can be easily identified and can be designed with better performance by using this program to studying the effects of different design parameters. Finally, the difference in the braking performance between the C-ABS and the braking system with or without a traditional ABS is discussed. The simulation results indicate that the C-ABS can prevent the wheel from locking even if excessive operating force is provided while still maintaining acceptable braking performance.

Performance evaluation of three computed radiography systems using methods recommended in American Association of Physicists in Medicine Report 93

PubMed Central

Muhogora, Wilbroad; Padovani, Renato; Bonutti, Faustino; Msaki, Peter; Kazema, R.

2011-01-01

The performances of three clinical computed radiography (CR) systems, (Agfa CR 75 (with CRMD 4.0 image plates), Kodak CR 850 (with Kodak GP plates) and Kodak CR 850A (with Kodak GP plates)) were evaluated using six tests recommended in American Association of Physicists in Medicine Report 93. The results indicated variable performances with majority being within acceptable limits. The variations were mainly attributed to differences in detector formulations, plate readers’ characteristics, and aging effects. The differences of the mean low contrast scores between the imaging systems for three observers were statistically significant for Agfa and Kodak CR 850A (P=0.009) and for Kodak CR systems (P=0.006) probably because of the differences in ages. However, the differences were not statistically significant between Agfa and Kodak CR 850 (P=0.284) suggesting similar perceived image quality. The study demonstrates the need to implement quality control program regularly. PMID:21897559

Performance evaluation of three computed radiography systems using methods recommended in American Association of Physicists in Medicine Report 93.

PubMed

Muhogora, Wilbroad; Padovani, Renato; Bonutti, Faustino; Msaki, Peter; Kazema, R

2011-07-01

The performances of three clinical computed radiography (CR) systems, (Agfa CR 75 (with CRMD 4.0 image plates), Kodak CR 850 (with Kodak GP plates) and Kodak CR 850A (with Kodak GP plates)) were evaluated using six tests recommended in American Association of Physicists in Medicine Report 93. The results indicated variable performances with majority being within acceptable limits. The variations were mainly attributed to differences in detector formulations, plate readers' characteristics, and aging effects. The differences of the mean low contrast scores between the imaging systems for three observers were statistically significant for Agfa and Kodak CR 850A (P=0.009) and for Kodak CR systems (P=0.006) probably because of the differences in ages. However, the differences were not statistically significant between Agfa and Kodak CR 850 (P=0.284) suggesting similar perceived image quality. The study demonstrates the need to implement quality control program regularly.

Consensus guidelines for lumbar puncture in patients with neurological diseases.

PubMed

Engelborghs, Sebastiaan; Niemantsverdriet, Ellis; Struyfs, Hanne; Blennow, Kaj; Brouns, Raf; Comabella, Manuel; Dujmovic, Irena; van der Flier, Wiesje; Frölich, Lutz; Galimberti, Daniela; Gnanapavan, Sharmilee; Hemmer, Bernhard; Hoff, Erik; Hort, Jakub; Iacobaeus, Ellen; Ingelsson, Martin; Jan de Jong, Frank; Jonsson, Michael; Khalil, Michael; Kuhle, Jens; Lleó, Alberto; de Mendonça, Alexandre; Molinuevo, José Luis; Nagels, Guy; Paquet, Claire; Parnetti, Lucilla; Roks, Gerwin; Rosa-Neto, Pedro; Scheltens, Philip; Skårsgard, Constance; Stomrud, Erik; Tumani, Hayrettin; Visser, Pieter Jelle; Wallin, Anders; Winblad, Bengt; Zetterberg, Henrik; Duits, Flora; Teunissen, Charlotte E

2017-01-01

Cerebrospinal fluid collection by lumbar puncture (LP) is performed in the diagnostic workup of several neurological brain diseases. Reluctance to perform the procedure is among others due to a lack of standards and guidelines to minimize the risk of complications, such as post-LP headache or back pain. We provide consensus guidelines for the LP procedure to minimize the risk of complications. The recommendations are based on (1) data from a large multicenter LP feasibility study (evidence level II-2), (2) systematic literature review on LP needle characteristics and post-LP complications (evidence level II-2), (3) discussion of best practice within the Joint Programme Neurodegenerative Disease Research Biomarkers for Alzheimer's disease and Parkinson's Disease and Biomarkers for Multiple Sclerosis consortia (evidence level III). Our consensus guidelines address contraindications, as well as patient-related and procedure-related risk factors that can influence the development of post-LP complications. When an LP is performed correctly, the procedure is well tolerated and accepted with a low complication rate.

Fluid infusion system

NASA Technical Reports Server (NTRS)

1974-01-01

Performance testing carried out in the development of the prototype zero-g fluid infusion system is described and summarized. Engineering tests were performed in the course of development, both on the original breadboard device and on the prototype system. This testing was aimed at establishing baseline system performance parameters and facilitating improvements. Acceptance testing was then performed on the prototype system to verify functional performance. Acceptance testing included a demonstration of the fluid infusion system on a laboratory animal.

Effects of Blanching and Natural Convection Solar Drying on Quality Characteristics of Red Pepper (Capsicum annuum L.)

PubMed Central

Kori, Francis K. K.

2017-01-01

The objective of this work was to determine the effects of blanching and two drying methods, open-sun drying and natural convection solar drying, on the quality characteristics of red pepper. A 2 × 3 factorial design with experimental factors as 2 drying methods (open-sun drying and use of solar dryer) and 3 levels of pepper blanching (unblanched, blanched in plain water, and blanched in 2% NaCl) was conducted. Dried pepper samples were analysed for chemical composition, microbial load, and consumer sensory acceptability. Blanching of pepper in 2% NaCl solution followed by drying in a natural convection solar dryer reduced drying time by 15 hours. Similarly, a combination of blanching and drying in the solar dryer improved microbial quality of dried pepper. However, blanching and drying processes resulted in reduction in nutrients such as vitamin C and minerals content of pepper. Blanching followed by drying in natural convection solar dryer had the highest consumer acceptability scores for colour and overall acceptability, while texture and aroma were not significantly (p > 0.05) affected by the different treatments. Therefore, natural convection solar dryer can be used to dry pepper with acceptable microbial and sensory qualities, as an alternative to open-sun drying. PMID:29082236

User Perspectives of Characteristics of Improved Cookstoves from a Field Evaluation in Western Kenya

PubMed Central

Loo, Jennifer D.; Hyseni, Lirije; Ouda, Rosebel; Koske, Selline; Nyagol, Ronald; Sadumah, Ibrahim; Bashin, Michelle; Sage, Mike; Bruce, Nigel; Pilishvili, Tamara; Stanistreet, Debbi

2016-01-01

Over half of the world’s population uses biomass fuels; these households cook on open fires indoors, increasing their risk of adverse health effects due to household air pollution (HAP) from biomass combustion. This study evaluated six improved cookstoves (ICS) for effectiveness and acceptability in a rural community in Western Kenya. This paper describes women’s views on each ICS compared to the traditional three-stone fire. Views on stove characteristics, fuel consumption, health effects and acceptability were assessed through structured interviews and focus group discussions. Data were coded and analyzed using a thematic approach. In total, 262 interviews and 11 focus groups were conducted from 43 women. Overall, women preferred the ICS over the traditional three-stone fire for various reasons including ease of use, efficiency, fuel efficiency and perceived reduction in smoke and improved health. However, there were clear preferences for specific ICS with almost half of women preferring a Philips stove. Despite acceptance and use of ICS, women used multiple stoves to meet their daily needs. Qualitative studies are essential to field evaluations to provide insight into user perspectives and acceptability of ICS and to inform research and development of technologies that are both effective in reducing HAP and practical in use. PMID:26828505

Will they like me? Adolescents’ emotional responses to peer evaluation

PubMed Central

Guyer, Amanda E.; Caouette, Justin D.; Lee, Clinton C.; Ruiz, Sarah K.

2014-01-01

Relative to children and adults, adolescents are highly focused on being evaluated by peers. This increased attention to peer evaluation has implications for emotion regulation in adolescence, but little is known about the characteristics of the evaluatee and evaluator that influence emotional reactions to evaluative outcomes. The present study used a computer-based social evaluation task to examine predictors of adolescents’ emotional responses to feedback from unknown peers. Nine-to-seventeen-year-olds (N = 36) completed the “chatroom task” and indicated the degree to which each peer would be interested in interacting with them and how good they felt after receiving acceptance and rejection feedback from peers. We examined whether adolescents’ age and gender impacted their emotional responses to being accepted or rejected by peers of different age groups (i.e., early or middle adolescence) and genders. We also tested whether expectations about peers’ interest was associated with variability in adolescents’ emotional responses to the evaluative outcome. Upon being accepted by middle adolescent male peers, females in the middle relative to early years of adolescence reported greater well-being, whereas males reported similar levels of well-being regardless of their own age. Following acceptance from middle adolescent female peers, females reported greater well-being than males. Adolescents with high expectations for being liked by peers felt better after being accepted versus rejected relative to those with low expectations. For adolescents with low expectations, acceptance and rejection were associated with similar levels of well-being. Adolescents’ emotional responses to peer evaluation are influenced by specific individual characteristics and antecedent preparation for evaluation that may serve an emotion regulatory purpose. PMID:25076803

Contingent valuation and pharmacists' acceptable levels of compensation for medication therapy management services.

PubMed

Wang, Junling; Hong, Song Hee

2015-01-01

Pharmacists' acceptable level of compensation for medication therapy management (MTM) services needs to be determined using various economic evaluation techniques. Using contingent valuation method, determine pharmacists' acceptable levels of compensation for MTM services. A mailing survey was used to elicit Tennessee (U.S.) pharmacists' acceptable levels of compensation for a 30-minute MTM session for a new patient with 2 medical conditions, 8 medications, and an annual drug cost of $2000. Three versions of a series of double-bounded, closed-ended, binary discrete choice questions were asked of pharmacists for their willingness to accept (WTA) for an original monetary value ($30, $60, or $90) and then follow-up higher or lower value depending on their responses to the original value. A Kaplan-Meier approach was taken to analyze pharmacists' WTA, and Cox's proportional hazards model was used to examine the effects of pharmacist characteristics on their WTA. Three hundred and forty-eight pharmacists responded to the survey. Pharmacists' WTA for the given MTM session had a mean of $63.31 and median of $60. The proportions of pharmacists willing to accept $30, $60, and $90 for the given MTM session were 30.61%, 85.19%, and 91.01%, respectively. Pharmacists' characteristics had statistically significant association with their WTA rates. Pharmacists' WTA for the given MTM session is higher than current Medicare MTM programs' compensation levels of $15-$50 and patients' willingness to pay of less than $40. Besides advocating for higher MTM compensation levels by third-party payers, pharmacists also may need to charge patients to reach sufficient compensation levels for MTM services. Copyright © 2015 Elsevier Inc. All rights reserved.

Contingent Valuation and Pharmacists' Acceptable Levels of Compensation for Medication Therapy Management Services

PubMed Central

Wang, Junling; Hong, Song Hee

2012-01-01

Background Pharmacists' acceptable level of compensation for medication therapy management (MTM) services needs to be determined using various economic evaluation techniques. Objectives Using contingent valuation method, determine pharmacists' acceptable levels of compensation for MTM services. Methods A mailing survey was used to elicit Tennessee (US) pharmacists' acceptable levels of compensation for a 30-minute MTM session for a new patient with 2 medical conditions, 8 medications, and an annual drug cost of $2,000. Three versions of a series of double-bounded, closed-ended, binary discrete choice questions were asked of pharmacists for their willingness-to-accept (WTA) for an original monetary value ($30, $60, or $90) and then follow-up higher or lower value depending on their responses to the original value. A Kaplan-Meier approach was taken to analyze pharmacists' WTA, and Cox's proportional hazards model was used to examine the effects of pharmacist characteristics on their WTA. Results Three hundred and forty-eight pharmacists responded to the survey. Pharmacists' WTA for the given MTM session had a mean of $63.31 and median of $60. The proportions of pharmacists willing to accept $30, $60, and $90 for the given MTM session were 30.61%, 85.19%, and 91.01%, respectively. Pharmacists' characteristics had statistically significant association with their WTA rates. Conclusions Pharmacists' WTA for the given MTM session is higher than current Medicare MTM programs' compensation levels of $15 to $50 and patients' willingness-to-pay of less than $40. Besides advocating for higher MTM compensation levels by third-party payers, pharmacists also may need to charge patients to reach sufficient compensation levels for MTM services. PMID:22436583

Sensory quality of broiler breast meat influenced by low atmospheric pressure stunning, deboning time and cooking methods.

PubMed

Schilling, M W; Radhakrishnan, V; Vizzier-Thaxton, Y; Christensen, K; Williams, J B; Joseph, P

2015-06-01

Stunning method (low atmospheric pressure stunning, LAPS and electrical stunning, ES), deboning time (0.75 h and 4 h), and cooking method (baking, frying, and sous vide) were evaluated for their impact on the descriptive sensory characteristics and consumer acceptability of breast meat (n=576, 144 birds per stunning × deboning time combination). Sensory evaluation was conducted by trained descriptive (n=8) and consumer (n=185) panels. On average, no differences (P>0.05) existed in the sensory acceptability of fried and sous vide cooked broiler breast treatment combinations. However, for oven-baking, the LAPS treatment that was deboned at 4 h was more acceptable (P<0.05) than other treatments and the ES and LAPS 4 h samples had greater (P<0.05) acceptability for texture than their ES and LAPS 0.75 h counterparts. Since consumers were highly variable in their liking of chicken breast treatments, consumers were grouped into clusters for each cooking method based on liking and preference. Cluster analysis data revealed that the largest groups of consumers liked (score≥6.0) all chicken breast treatments, but a larger proportion of consumers liked the 4 h LAPS and ES treatments when compared to the 0.75 h LAPS and ES treatments for all cooking methods. In addition, the consumers who indicated that baked chicken breast was highly acceptable preferred (P<0.05) 4 h LAPS over the 4 h ES samples. Based on sensory results, chicken breast meat from all stunning and deboning method combinations was highly acceptable to the majority of consumers, but the LAPS 4 h treatment had enhanced sensory characteristics when baked. © 2015 Poultry Science Association Inc.

STGSTK- PREDICTING MULTISTAGE AXIAL-FLOW COMPRESSOR PERFORMANCE BY A MEANLINE STAGE-STACKING METHOD

NASA Technical Reports Server (NTRS)

Steinke, R. J.

1994-01-01

The STGSTK computer program was developed for predicting the off-design performance of multistage axial-flow compressors. The axial-flow compressor is widely used in aircraft engines. In addition to its inherent advantage of high mass flow per frontal area, it can exhibit very good aerodynamic performance. However, good aerodynamic performance over an acceptable range of operating conditions is not easily attained. STGSTK provides an analytical tool for the development of new compressor designs. The simplicity of a one-dimensional compressible flow model enables the stage-stacking method used in STGSTK to have excellent convergence properties and short computer run times. Also, the simplicity of the model makes STGSTK a manageable code that eases the incorporation, or modification, of empirical correlations directly linked to test data. Thus, the user can adapt the code to meet varying design needs. STGSTK uses a meanline stage-stacking method to predict off-design performance. Stage and cumulative compressor performance is calculated from representative meanline velocity diagrams located at rotor inlet and outlet meanline radii. STGSTK includes options for the following: 1) non-dimensional stage characteristics may be input directly or calculated from stage design performance input, 2) stage characteristics may be modified for off-design speed and blade reset, and 3) rotor design deviation angle may be modified for off-design flow, speed, and blade setting angle. Many of the code's options use correlations that are normally obtained from experimental data. The STGSTK user may modify these correlations as needed. This program is written in FORTRAN IV for batch execution and has been implemented on an IBM 370 series computer with a central memory requirement of approximately 85K of 8 bit bytes. STGSTK was developed in 1982.

Experimental evaluation of high performance base course and road base asphalt concrete with electric arc furnace steel slags.

PubMed

Pasetto, Marco; Baldo, Nicola

2010-09-15

The paper presents the results of a laboratory study aimed at verifying the use of two types of electric arc furnace (EAF) steel slags as substitutes for natural aggregates, in the composition of base course and road base asphalt concrete (BBAC) for flexible pavements. The trial was composed of a preliminary study of the chemical, physical, mechanical and leaching properties of the EAF steel slags, followed by the mix design and performance characterization of the bituminous mixes, through gyratory compaction tests, permanent deformation tests, stiffness modulus tests at various temperatures, fatigue tests and indirect tensile strength tests. All the mixtures with EAF slags presented better mechanical characteristics than those of the corresponding asphalts with natural aggregate and satisfied the requisites for acceptance in the Italian road sector technical standards, thus resulting as suitable for use in road construction. Copyright 2010 Elsevier B.V. All rights reserved.

Development of an extended-burnup Mark B design. First semi-annual progress report, July-December 1978. Report BAW-1532-1. [PWR

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1979-10-01

The primary objective of this program is to develop and demonstrate an improved PWR fuel assembly design capable of batch average burnups of 45,000-50,000 MWd/mtU. To accomplish this, a number of technical areas must be investigated to verify acceptable extended-burnup fuel performance. This report is the first semi-annual progress report for the program, and it describes work performed during the July-December 1978 time period. Efforts during this period included the definition of a preliminary design for a high-burnup fuel rod, physics analyses of extended-burnup fuel cycles, studies of the physics characteristics of changes in fuel assembly metal-to-water ratios, and developmentmore » of a design concept for post-irradiation examination equipment to be utilized in examining high-burnup lead-test assemblies.« less

Virtual auditorium concepts for exhibition halls

NASA Astrophysics Data System (ADS)

Evans, Jack; Himmel, Chad; Knight, Sarah

2002-11-01

Many communities lack good performance facilities for symphonic music, opera, dramatic and musical arts, but have basic convention, exhibition or assembly spaces. It should be possible to develop performance space environments within large multipurpose facilities that will accommodate production and presentation of dramatic arts. Concepts for moderate-cost, temporary enhancements that transform boxy spaces into more intimate, acoustically articulated venues will be presented. Acoustical criteria and design parameters will be discussed in the context of creating a virtual auditorium within the building envelope. Physical, economic, and logistical limitations affect implementation. Sound reinforcement system augmentation can supplement the room conversion. Acceptable control of reflection patterns, reverberation, and to some extent, ambient noise, may be achieved with an array of nonpermanent reflector and absorber elements. These elements can sculpture an enclosure to approach the shape and acoustic characteristics of an auditorium. Plan and section illustrations will be included.

Undulator performance on PEP storage ring with different optics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shenoy, G.K.; Viccaro, P.J.; Alp, E.E.

1987-12-01

Our ability to profitably utilize the radiation from undulators proposed for PEP is determined by their performance in the different operating modes and by whether the design tolerance required for acceptable operation of the device can be met with available technology. The purpose of this paper is to provide spectral characteristics for some typical devices calculated using a Monte-Carlo algorithm in which the Lienard-Wiechert potential is integrated over the trajectory of the charged particle along the undulator length. The actual emittance of the particle beam for the various PEP operating modes are included explicitly in the simulations. In addition, wemore » have carried out a single partial analysis of the effects of undulator magnetic field errors on the spectral properties in order to estimate the design tolerance requirements necessary for devices which have been proposed PEP. 6 figs.« less

Emergency department care for trauma patients in settings of active conflict versus urban violence: all of the same calibre?

PubMed

Valles, Pola; Van den Bergh, Rafael; van den Boogaard, Wilma; Tayler-Smith, Katherine; Gayraud, Olivia; Mammozai, Bashir Ahmad; Nasim, Masood; Cheréstal, Sophia; Majuste, Alberta; Charles, James Philippe; Trelles, Miguel

2016-11-01

Trauma is a leading cause of death and represents a major problem in developing countries where access to good quality emergency care is limited. Médecins Sans Frontières delivered a standard package of care in two trauma emergency departments (EDs) in different violence settings: Kunduz, Afghanistan, and Tabarre, Haiti. This study aims to assess whether this standard package resulted in similar performance in these very different contexts. A cross-sectional study using routine programme data, comparing patient characteristics and outcomes in two EDs over the course of 2014. 31 158 patients presented to the EDs: 22 076 in Kunduz and 9082 in Tabarre. Patient characteristics, such as delay in presentation (29.6% over 24 h in Kunduz, compared to 8.4% in Tabarre), triage score, and morbidity pattern differed significantly between settings. Nevertheless, both EDs showed an excellent performance, demonstrating low proportions of mortality (0.1% for both settings) and left without being seen (1.3% for both settings), and acceptable triage performance. Physicians' maximum working capacity was exceeded in both centres, and mainly during rush hours. This study supports for the first time the plausibility of using the same ED package in different settings. Mapping of patient attendance is essential for planning of human resources needs. © The Author 2016. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene.

Improvement in sensory characteristics of Campbell Early wine by adding dual starters of Saccharomyces cerevisiae and Oenococcus oeni.

PubMed

Yoo, Ki-Seon; Kim, Ji Eun; Seo, Eun-Young; Kim, Yu Jin; Choi, Hwa Young; Yoon, Hyang-Sik; Kim, Myoung-Dong; Han, Nam Soo

2010-07-01

This study was performed to investigate the effects of adding a dual starter on the chemical and sensory characteristics of red wine made of Campbell Early grape. The yeast starter, Saccharomyces cerevisiae, and lactic acid bacteria (LAB) starter, Oenococcus oeni, were used for inoculation in the winemaking process for alcoholic and malolactic fermentation (MLF), respectively. After 200 days incubation, the chemical compositions of yeast/LAB-added wine (YL-wine) were compared with those of no starter-added wine (control) and yeast-added wine (Y-wine). The results show that no significant differences were observed in pH, total sugar, and alcohol content among wine samples, but the malic acid content in YL-wine was significantly reduced and various esters and higher alcohols were synthesized. The sensory test revealed that the addition of dual starters resulted in improved overall acceptability in wine. This study emphasizes the importance of O. oeni in addition to yeast in making Campbell Early wine.

A Mathematical Model of Marine Diesel Engine Speed Control System

NASA Astrophysics Data System (ADS)

Sinha, Rajendra Prasad; Balaji, Rajoo

2018-02-01

Diesel engine is inherently an unstable machine and requires a reliable control system to regulate its speed for safe and efficient operation. Also, the diesel engine may operate at fixed or variable speeds depending upon user's needs and accordingly the speed control system should have essential features to fulfil these requirements. This paper proposes a mathematical model of a marine diesel engine speed control system with droop governing function. The mathematical model includes static and dynamic characteristics of the control loop components. Model of static characteristic of the rotating fly weights speed sensing element provides an insight into the speed droop features of the speed controller. Because of big size and large time delay, the turbo charged diesel engine is represented as a first order system or sometimes even simplified to a pure integrator with constant gain which is considered acceptable in control literature. The proposed model is mathematically less complex and quick to use for preliminary analysis of the diesel engine speed controller performance.

Early evaluation of MDIS workstations at Madigan Army Medical Center

NASA Astrophysics Data System (ADS)

Leckie, Robert G.; Goeringer, Fred; Smith, Donald V.; Bender, Gregory N.; Choi, Hyung-Sik; Haynor, David R.; Kim, Yongmin

1993-06-01

The image viewing workstation is an all-important link in the PACS (Picture Archiving and Communications System) chain since it represents the interface between the system and the user. For PACS to function, the working environment and transfer of information to the user must be the same or better than the traditional film-based system. The important characteristics of a workstation from a clinical standpoint are acceptable image quality, rapid response time, a friendly user interface, and a well-integrated, highly-reliable, fault-tolerant system which provides the user ample functions to complete his tasks successfully. Since early 1992, the MDIS (Medical Diagnostic Imaging Support) system's diagnostic and clinical workstations have been installed at Madigan Army Medical Center. Various functionalities and performance characteristics of the MDIS workstations such as image display, response time, database, and ergonomics will be presented. User comments and early experience with the workstations as well as new functionality recommended for the future will be discussed.

Dementia knowledge assessment scale (DKAS): confirmatory factor analysis and comparative subscale scores among an international cohort.

PubMed

Annear, Michael J; Toye, Chris; Elliott, Kate-Ellen J; McInerney, Frances; Eccleston, Claire; Robinson, Andrew

2017-07-31

Dementia is a life-limiting condition that is increasing in global prevalence in line with population ageing. In this context, it is necessary to accurately measure dementia knowledge across a spectrum of health professional and lay populations with the aim of informing targeted educational interventions and improving literacy, care, and support. Building on prior exploratory analysis, which informed the development of the preliminarily valid and reliable version of the Dementia Knowledge Assessment Scale (DKAS), a Confirmatory Factor Analysis (CFA) was performed to affirm construct validity and proposed subscales to further increase the measure's utility for academics and educators. A large, de novo sample of 3649 volunteer respondents to a dementia-related online course was recruited to evaluate the performance of the DKAS and its proposed subscales. Respondents represented diverse cohorts, including health professionals, students, and members of the general public. Analyses included CFA (using structural equation modelling), measures of internal consistency (α), and non-parametric tests of subscale correlation (Spearman Correlation) and score differences between cohorts (Kruskal-Wallis one-way analysis of variance). Findings of the CFA supported a 25-item, four-factor model for the DKAS with two items removed due to poor performance and one item moved between factors. The resultant model exhibited good reliability (α = .85; ω h  = .87; overall scale), with acceptable subscale internal consistency (α ≥ .65; subscales). Subscales showed acceptable correlation without any indication of redundancy. Finally, total and DKAS subscale scores showed good discrimination between cohorts of respondents who would be anticipated to hold different levels of knowledge on the basis of education or experience related to dementia. The DKAS has been confirmed as a reliable and valid measure of dementia knowledge for diverse populations that is capable of elucidating knowledge characteristics across four coherent domains: 1) Causes and Characteristics, 2) Communication and Behaviour, 3) Care Considerations, and 4) Risks and Health Promotion. Importantly, the four confirmed subscales clearly distinguish between groups who might be expected to hold differing levels of knowledge about dementia, allowing for a fine-grained level of detail to be established when evaluating baseline understanding or knowledge change associated with educational intervention.

Validation of Electrochemically Modulated Separations Performed On-Line with MC-ICP-MS for Uranium and Plutonium Isotopic Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liezers, Martin; Olsen, Khris B.; Mitroshkov, Alexandre V.

2010-08-11

The most time consuming process in uranium or plutonium isotopic analyses is performing the requisite chromatographic separation of the actinides. Filament preparation for thermal ionization (TIMS) adds further delays, but is generally accepted due to the unmatched performance in trace isotopic analyses. Advances in Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS) are beginning to rival the performance of TIMS. Methods, such as Electrochemically Modulated Separations (EMS) can efficiently pre-concentrate U or Pu quite selectively from small solution volumes in a matrix of 0.5 M nitric acid. When performed in-line with ICP-MS, the rapid analyte release from the electrode is fast,more » and large transient analyte signal enhancements of >100 fold can be achieved as compared to more conventional continuous nebulization of the original starting solution. This makes the approach ideal for very low level isotope ratio measurements. In this paper, some aspects of EMS performance are described. These include low level Pu isotope ratio behavior versus concentration by MC-ICP-MS and uranium rejection characteristics that are also important for reliable low level Pu isotope ratio determinations.« less

A survey regarding acceptability of oral emergency contraception according to the posited mechanism of action.

PubMed

Willetts, S J; MacDougall, M; Cameron, S T

2017-08-01

The objective was to determine the acceptability to women of oral emergency contraception (EC) that works by inhibiting ovulation, preventing implantation or disrupting implantation, and also to determine the characteristics of women associated with the acceptability of each posited mechanism of action. Women completed a self-administered, anonymous questionnaire asking whether they would consider using an EC pill based on each of three hypothetical mechanisms of action: inhibiting ovulation, preventing implantation or disrupting implantation. The questionnaire was distributed among women in Edinburgh, UK, (a) presenting for EC at a community pharmacy, (b) attending a clinic for insertion of intrauterine contraception (IUC) or (c) attending a clinic for an induced abortion. Descriptive analyses stratified women according to healthcare setting and personal characteristics. Univariable and multivariable analyses were used to establish factors which may predict acceptability of each EC pill's mechanism of action. Four hundred and nineteen out of 458 (91%) women responded to the survey. Overall, women reported that EC would be acceptable if it worked by inhibiting ovulation (89%), preventing implantation (83%) or disrupting implantation (75%). Among women seeking abortion, more would accept an EC pill which disrupted implantation compared to women seeking IUC (odds ratio, 2.19; 95% confidence interval, 1.30-3.69; p=.004). Based on multivariable analyses, factors associated with acceptability included previous use of EC, previously holding strong views against abortion and having had a previous abortion. For each of the posited mechanisms of action, a majority of women surveyed would be willing to consider oral EC to prevent unintended pregnancy. The scope of the study was limited, and further work on the views of women in the wider population is needed. This is important as the development of such drugs to prevent pregnancy is likely to raise political and ethical challenges, particularly in relation to disruption of implantation. Copyright © 2017 Elsevier Inc. All rights reserved.

Positive Psychological Wellbeing Is Required for Online Self-Help Acceptance and Commitment Therapy for Chronic Pain to be Effective

PubMed Central

Trompetter, Hester R.; Bohlmeijer, Ernst T.; Lamers, Sanne M. A.; Schreurs, Karlein M. G.

2016-01-01

The web-based delivery of psychosocial interventions is a promising treatment modality for people suffering from chronic pain, and other forms of physical and mental illness. Despite the promising findings of first studies, patients may vary in the benefits they draw from self-managing a full-blown web-based psychosocial treatment. We lack knowledge on moderators and predictors of change during web-based interventions that explain for whom web-based interventions are especially (in)effective. In this study, we primarily explored for which chronic pain patients web-based Acceptance and Commitment Therapy (ACT) was (in)effective during a large three-armed randomized controlled trial. Besides standard demographic, physical and psychosocial factors we focused on positive mental health. Data from 238 heterogeneously diagnosed chronic pain sufferers from the general Dutch population following either web-based ACT (n = 82), or one of two control conditions [web-based Expressive Writing (EW; n = 79) and Waiting List (WL; n = 77)] were analysed. ACT and EW both consisted of nine modules and lasted nine to 12 weeks. Exploratory linear regression analyses were performed using the PROCESS macro in SPSS. Pain interference at 3-month follow-up was predicted from baseline moderator (characteristics that influence the outcome of specific treatments in comparison to other treatments) and predictor (characteristics that influence outcome regardless of treatment) variables. The results showed that none of the demographic or physical characteristics moderated ACT treatment changes compared to both control conditions. The only significant moderator of change compared to both EW and WL was baseline psychological wellbeing, and pain intensity was a moderator of change compared to EW. Furthermore, higher pain interference, depression and anxiety, and also lower levels of emotional well-being predicted higher pain interference in daily life 6 months later. These results suggest that web-based self-help ACT may not be allocated to chronic pain sufferers experiencing low levels of mental resilience resources such as self-acceptance, goals in life, and environmental mastery. Other subgroups are identified that potentially need specific tailoring of (web-based) ACT. Emotional and psychological wellbeing should receive much more attention in subsequent studies on chronic pain and illness. PMID:27014159

Impact of future fuel properties on aircraft engines and fuel systems

NASA Technical Reports Server (NTRS)

Rudey, R. A.; Grobman, J. S.

1978-01-01

From current projections of the availability of high-quality petroleum crude oils, it is becoming increasingly apparent that the specifications for hydrocarbon jet fuels may have to be modified. The problems that are most likely to be encountered as a result of these modifications relate to engine performance, component durability and maintenance, and aircraft fuel-system performance. The effect on engine performance will be associated with changes in specific fuel consumption, ignition at relight limits, at exhaust emissions. Durability and maintenance will be affected by increases in combustor liner temperatures, carbon deposition, gum formation in fuel nozzles, and erosion and corrosion of turbine blades and vanes. Aircraft fuel-system performance will be affected by increased deposits in fuel-system heat exchangers and changes in the pumpability and flowability of the fuel. The severity of the potential problems is described in terms of the fuel characteristics most likely to change in the future. Recent data that evaluate the ability of current-technology aircraft to accept fuel specification changes are presented, and selected technological advances that can reduce the severity of the problems are described and discussed.

Robust Control for The G-Limit Microgravity Vibration Isolation System

NASA Technical Reports Server (NTRS)

Whorton, Mark S.

2004-01-01

Many microgravity science experiments need an active isolation system to provide a sufficiently quiescent acceleration environment. The g-LIMIT vibration isolation system will provide isolation for Microgravity Science Glovebox experiments in the International Space Station. While standard control system technologies have been demonstrated for these applications, modern control methods have the potential for meeting performance requirements while providing robust stability in the presence of parametric uncertainties that are characteristic of microgravity vibration isolation systems. While H2 and H infinity methods are well established, neither provides the levels of attenuation performance and robust stability in a compensator with low order. Mixed H2/mu controllers provide a means for maximizing robust stability for a given level of mean-square nominal performance while directly optimizing for controller order constraints. This paper demonstrates the benefit of mixed norm design from the perspective of robustness to parametric uncertainties and controller order for microgravity vibration isolation. A nominal performance metric analogous to the mu measure for robust stability assessment is also introduced in order to define an acceptable trade space from which different control methodologies can be compared.

An Experimental Investigation of Leak Rate Performance of a Subscale Candidate Elastomer Docking Space Seal

NASA Technical Reports Server (NTRS)

Garafolo, Nicholas G.; Daniels, Christopher C.

2011-01-01

A novel docking seal was developed for the main interface seal of NASA s Low Impact Docking System (LIDS). This interface seal was designed to maintain acceptable leak rates while being exposed to the harsh environmental conditions of outer space. In this experimental evaluation, a candidate docking seal assembly called Engineering Development Unit (EDU58) was characterized and evaluated against the Constellation Project leak rate requirement. The EDU58 candidate seal assembly was manufactured from silicone elastomer S0383-70 vacuum molded in a metal retainer ring. Four seal designs were considered with unique characteristic heights. The leak rate performance was characterized through a mass point leak rate method by monitoring gas properties within an internal control volume. The leakage performance of the seals were described herein at representative docking temperatures of -50, +23, and +50 C for all four seal designs. Leak performance was also characterized at 100, 74, and 48 percent of full closure. For all conditions considered, the candidate seal assemblies met the Constellation Project leak rate requirement.

Inlet Trade Study for a Low-Boom Aircraft Demonstrator

NASA Technical Reports Server (NTRS)

Heath, Christopher M.; Slater, John W.; Rallabhandi, Sriram K.

2016-01-01

Propulsion integration for low-boom supersonic aircraft requires careful inlet selection, placement, and tailoring to achieve acceptable propulsive and aerodynamic performance, without compromising vehicle sonic boom loudness levels. In this investigation, an inward-turning streamline-traced and axisymmetric spike inlet are designed and independently installed on a conceptual low-boom supersonic demonstrator aircraft. The airframe was pre-shaped to achieve a target ground under-track loudness of 76.4 PLdB at cruise using an adjoint-based design optimization process. Aircraft and inlet performance characteristics were obtained by solution of the steady-state Reynolds-averaged Navier-Stokes equations. Isolated cruise inlet performance including total pressure recovery and distortion were computed and compared against installed inlet performance metrics. Evaluation of vehicle near-field pressure signatures, along with under- and off-track propagated loudness levels is also reported. Results indicate the integrated axisymmetric spike design offers higher inlet pressure recovery, lower fan distortion, and reduced sonic boom. The vehicle with streamline-traced inlet exhibits lower external wave drag, which translates to a higher lift-to-drag ratio and increased range capability.

Acceptance model of a Hospital Information System.

PubMed

Handayani, P W; Hidayanto, A N; Pinem, A A; Hapsari, I C; Sandhyaduhita, P I; Budi, I

2017-03-01

The purpose of this study is to develop a model of Hospital Information System (HIS) user acceptance focusing on human, technological, and organizational characteristics for supporting government eHealth programs. This model was then tested to see which hospital type in Indonesia would benefit from the model to resolve problems related to HIS user acceptance. This study used qualitative and quantitative approaches with case studies at four privately owned hospitals and three government-owned hospitals, which are general hospitals in Indonesia. The respondents involved in this study are low-level and mid-level hospital management officers, doctors, nurses, and administrative staff who work at medical record, inpatient, outpatient, emergency, pharmacy, and information technology units. Data was processed using Structural Equation Modeling (SEM) and AMOS 21.0. The study concludes that non-technological factors, such as human characteristics (i.e. compatibility, information security expectancy, and self-efficacy), and organizational characteristics (i.e. management support, facilitating conditions, and user involvement) which have level of significance of p<0.05, significantly influenced users' opinions of both the ease of use and the benefits of the HIS. This study found that different factors may affect the acceptance of each user in each type of hospital regarding the use of HIS. Finally, this model is best suited for government-owned hospitals. Based on the results of this study, hospital management and IT developers should have more understanding on the non-technological factors to better plan for HIS implementation. Support from management is critical to the sustainability of HIS implementation to ensure HIS is easy to use and provides benefits to the users as well as hospitals. Finally, this study could assist hospital management and IT developers, as well as researchers, to understand the obstacles faced by hospitals in implementing HIS. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Estimates of restrictive ventilatory defect in the mining industry. Considerations for epidemiological investigations: a cross-sectional study.

PubMed

Odo, Nnaemeka U; Mandel, Jeffrey H; Perlman, David M; Alexander, Bruce H; Scanlon, Paul D

2013-01-01

(1) To assess the impact of American Thoracic Society and European Respiratory Society (ATS/ERS) 'acceptability' and 'usability' criteria for spirometry on the estimates of restrictive ventilatory defect in a population of taconite miners. (2) To compare estimates of restrictive ventilatory defect with three different pulmonary function tests (spirometry, alveolar volume (VA) and diffusing capacity (DL,CO)). (3) To assess the role of population characteristics on these estimates. Cross-sectional study. Current and former workers in six current taconite mining operations of northeastern Minnesota were surveyed. We attempted to enrol 3313 participants. Of these, 1353 responded while 1188 current and former workers fully participated in the survey and 1084 performed complete pulmonary function testing and were assessed. We applied ATS/ERS acceptability criteria for all tests and categorised participants into groups according to whether they fully met, partially met or did not meet acceptability criteria for spirometry. Obstruction and restriction were defined utilising the lower limit of normal for all tests. When using VA, restriction was identified after excluding obstruction. Only 519 (47.9%) tests fully met ATS/ERS spirometry acceptability criteria. Within this group, 5% had obstruction and 6%, restriction on spirometry. In contrast, among all participants (N=1084), 16.8% had obstruction, while 4.5% had restriction. VA showed similar results in all groups after obstruction was excluded. Impaired gas transfer (reduced DL,CO) was identified in less than 50% of restriction identified by either spirometry or VA. Body mass index (BMI) was significantly related to spirometric restriction in all groups. Population estimates of restriction using spirometry or VA varied by spirometric acceptability criteria. Other factors identified as important considerations in the estimation of restrictive ventilatory defect included increased BMI and gas transfer impairment in a relatively smaller proportion of those with spirometric restriction. These insights are important when interpreting population-based physiological data in occupational settings.

47 CFR 2.805 - Operation of radio frequency devices prior to equipment authorization.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of performance and determination of customer acceptability, during developmental, design, or pre... performance and determination of customer acceptability, during developmental, design, or pre-production... authority of an experimental radio service authorization issued under part 5 of this chapter. (c) Operation...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

Psycho-vibratory evaluation of timber floors - Towards the determination of design indicators of vibration acceptability and vibration annoyance

NASA Astrophysics Data System (ADS)

Negreira, J.; Trollé, A.; Jarnerö, K.; Sjökvist, L.-G.; Bard, D.

2015-03-01

In timber housing constructions, vibrations can be a nuisance for inhabitants. Notably, the vibrational response of wooden floor systems is an issue in need of being dealt with more adequately in the designing of such buildings. Studies addressing human response to vibrations are needed in order to be able to better estimate what level of vibrations in dwellings can be seen as acceptable. In the present study, measurements on five different wooden floors were performed in a laboratory environment at two locations in Sweden (SP in Växjö and LU in Lund). Acceleration measurements were carried out while a person either was walking on a particular floor or was seated in a chair placed there as the test leader was walking on the floor. These participants filled out a questionnaire regarding their perception and experiencing of the vibrations in question. Independently of the subjective tests, several static and dynamic characteristics of the floors were determined through measurements. The ultimate aim was to develop indicators of human response to floor vibrations, specifically those regarding vibration acceptability and vibration annoyance, their being drawn based on relationships between the questionnaire responses obtained and the parameter values determined on the basis of the measurements carried out. To that end, use was made of multilevel regression. Although the sample of floors tested was small, certain clear trends could be noted. The first eigenfrequency (calculated in accordance with Eurocode 5) and Hu and Chui's criterion (calculated from measured quantities) proved to be the best indicators of vibration annoyance, and the Maximum Transient Vibration Value (computed on the basis of the accelerations experienced by the test subjects) to be the best indicator of vibration acceptability.

14 Years longitudinal evaluation of clinical information systems acceptance: The HEGP case.

PubMed

Hadji, Brahim; Martin, Guillaume; Dupuis, Isabelle; Campoy, Eric; Degoulet, Patrice

2016-02-01

Meaningful use and end-user satisfaction are two major components of the success of a clinical information system (CIS). The purpose of this study was to longitudinally measure and analyze the CIS use and satisfaction determinants in a multi-professional group at the Georges Pompidou university hospital (HEGP) in Paris. From the different evaluation surveys performed at HEGP, three periods were considered corresponding to 4, 8 and over 10 years after the first CIS deployment in 2000, respectively. Six acceptance dimensions were considered: CIS quality (CISQ), facilitating conditions (FC), perceived usefulness (PU), confirmation of expectations (CE), use, and global satisfaction (GS). Relationships between these constructs were tested through multiple regressions analysis and structural equation modeling (SEM). Responses were obtained from 298, 332, and 448 users for the three periods considered. CIS acceptance dimensions progressively and significantly increased over time. Significant differences between professions were observed with an initial low PU among medical staff. In the early deployment phase, GS appeared to be determined by CIS use, CISQ and PU (R(2)=.53 in SEM). In the very late post-adoption phase, GS was strongly determined by CISQ, CE, and PU (R(2)=.86 in SEM) and was no longer associated with CIS use. Acceptance models should be adapted to the phase of deployment of a CIS and integrate end-users' individual characteristics. Progressive reduction over time of the positive relationships between CIS use and satisfaction could possibly be considered as a maturity indicator of CIS deployment. These observations validate the introduction in post-adoption models of a continuance intention dimension. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Survival analysis: A consumer-friendly method to estimate the optimum sucrose level in probiotic petit suisse.

PubMed

Esmerino, E A; Paixão, J A; Cruz, A G; Garitta, L; Hough, G; Bolini, H M A

2015-11-01

For years, just-about-right (JAR) scales have been among the most used techniques to obtain sensory information about consumer perception, but recently, some researchers have harshly criticized the technique. The present study aimed to apply survival analysis to estimate the optimum sucrose concentration in probiotic petit suisse cheese and compare the survival analysis to JAR scales to verify which technique more accurately predicted the optimum sucrose concentration according to consumer acceptability. Two panels of consumers (total=170) performed affective tests to determine the optimal concentration of sucrose in probiotic petit suisse using 2 different methods of analysis: JAR scales (n=85) and survival analysis (n=85). Then an acceptance test was conducted using naïve consumers (n=100) between 18 and 60 yr old, with 2 samples of petit suisse, one with the ideal sucrose determined by JAR scales and the other with the ideal sucrose content determined by survival analysis, to determine which formulation was in accordance with consumer acceptability. The results indicate that the 2 sensory methods were equally effective in predicting the optimum sucrose level in probiotic petit suisse cheese, and no significant differences were detected in any of the characteristics related to liking evaluated. However, survival analysis has important advantages over the JAR scales. Survival analysis has shown the potential to be an advantageous tool for dairy companies because it was able to accurately predict the optimum sucrose content in a consumer-friendly way and was also practical for researchers because experimental sensory work is simpler and has been shown to be more cost effective than JAR scales without losses of consumer acceptability. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

High-temperature characteristics of advanced Ni-MH batteries using nickel electrodes containing CaF 2

NASA Astrophysics Data System (ADS)

Zhang, Xuezeng; Gong, Zhixin; Zhao, Shumei; Geng, Mingming; Wang, Yan; Northwood, Derek O.

The high-temperature charge acceptance of Ni-MH batteries has been improved through the addition of calcium fluoride to the pasted nickel hydroxide electrode made using spherical Co(OH) 2-coated nickel hydroxide powder. The charge acceptance of the Ni-MH battery at 60 °C is over 95% at 1 C charge/discharge rates. The charge acceptance at 60 °C remains at over 90% through 10 cycles. The use of Co(OH) 2-coated Ni(OH) 2 plus a CaF 2 addition to the positive electrode also significantly improved the high-temperature stability in terms of reduced gas evolution.

A study of the user's perception of economic value in nursing visits to primary care by the method of contingent valuation.

PubMed

Martín-Fernández, Jesús; Pérez-Rivas, Francisco Javier; Gómez-Gascón, Tomás; del Cura-González, Isabel; Tello Bernabé, Eugenia; Rodríguez-Martínez, Gemma; Polentinos-Castro, Elena; Domínguez-Bidagor, Julia; Ariza-Cardiel, Gloria; Conde-López, Juan Francisco; Beamud-Lagos, Milagros; Aguado-Arroyo, Oscar; Sanz-Bayona, Teresa; Gil-Lacruz, Ana Isabel

2011-10-03

The identification of the attribution of economic value that users of a health system assign to a health service could be useful in planning these services. The method of contingent valuation can provide information about the user's perception of value in monetary terms, and therefore comparable between services of a very different nature. This study attempts to extract the economic value that the subject, user of primary care nursing services in a public health system, attributes to this service by the method of contingent valuation, based on the perspectives of Willingness to Pay (WTP) and Willingness to Accept [Compensation] (WTA). This is an economic study with a transversal design. The contingent valuation method will be used to estimate the user's willingness to pay (WTP) for the care received from the primary care nurse and the willingness to accept [compensation] (WTA), were this service eliminated. A survey that meets the requisites of the contingent valuation method will be constructed and pilot-tested. Subsequently, 600 interviews will be performed with subjects chosen by systematic randomized sampling from among those who visit nursing at twenty health centers with different socioeconomic characteristics in the Community of Madrid. The characteristics of the subject and of the care received that can explain the variations in WTP, WTA and in the WTP/WTA ratio expressed will be studied. A theoretical validation of contingent valuation will be performed constructing two explanatory multivariate mixed models in which the dependent variable will be WTP, and the WTP/WTA relationship, respectively. The identification of the attribution of economic value to a health service that does not have a direct price at the time of use, such as a visit to primary care nursing, and the definition of a profile of "loss aversion" in reference to the service evaluated, can be relevant elements in planning, enabling incorporating patient preferences to health policy decision-making.

A study of the user's perception of economic value in nursing visits to primary care by the method of contingent valuation

PubMed Central

2011-01-01

Background The identification of the attribution of economic value that users of a health system assign to a health service could be useful in planning these services. The method of contingent valuation can provide information about the user's perception of value in monetary terms, and therefore comparable between services of a very different nature. This study attempts to extract the economic value that the subject, user of primary care nursing services in a public health system, attributes to this service by the method of contingent valuation, based on the perspectives of Willingness to Pay (WTP) and Willingness to Accept [Compensation] (WTA). Methods/Design This is an economic study with a transversal design. The contingent valuation method will be used to estimate the user's willingness to pay (WTP) for the care received from the primary care nurse and the willingness to accept [compensation] (WTA), were this service eliminated. A survey that meets the requisites of the contingent valuation method will be constructed and pilot-tested. Subsequently, 600 interviews will be performed with subjects chosen by systematic randomized sampling from among those who visit nursing at twenty health centers with different socioeconomic characteristics in the Community of Madrid. The characteristics of the subject and of the care received that can explain the variations in WTP, WTA and in the WTP/WTA ratio expressed will be studied. A theoretical validation of contingent valuation will be performed constructing two explanatory multivariate mixed models in which the dependent variable will be WTP, and the WTP/WTA relationship, respectively. Discussion The identification of the attribution of economic value to a health service that does not have a direct price at the time of use, such as a visit to primary care nursing, and the definition of a profile of "loss aversion" in reference to the service evaluated, can be relevant elements in planning, enabling incorporating patient preferences to health policy decision-making. PMID:21967306

Modeling static and dynamic human cardiovascular responses to exercise.

PubMed

Stremel, R W; Bernauer, E M; Harter, L W; Schultz, R A; Walters, R F

1975-08-01

A human performance model has been developed and described [9] which portrays the human circulatory, thermo regulatory and energy-exchange systems as an intercoupled set. In this model, steady state or static relationships are used to describe oxygen consumption and blood flow. For example, heart rate (HTRT) is calculated as a function of the oxygen and the thermo-regulatory requirements of each body compartment, using the steady state work values of cardiac output (CO, sum of all compartment blood flows) and stroke volume (SV, assumed maximal after 40% maximal oxygen consumption): HTRT=CO/SV. The steady state model has proven to be an acceptable first approximation, but the inclusion of transient characteristics are essential in describing the overall systems' adjustment to exercise stress. In the present study, the dynamic transient characteristics of heart rate, stroke volume and cardiac output were obtained from experiments utilizing step and sinusoidal forcing of work. The gain and phase relationships reveal a probable first order system with a six minute time constant, and are utilized to model the transient characteristics of these parameters. This approach leads to a more complex model but a more accurate representation of the physiology involved. The instrumentation and programming essential to these experiments are described.

Characteristics and User Acceptance of Peer Rating in EFL Writing Classrooms

ERIC Educational Resources Information Center

Saito, Hidetoshi; Fujita, Tomoko

2004-01-01

Lack of research on the characteristics of peer assessment in EFL writing may inhibit teachers from appreciating the utility of this innovative assessment. This study addressed the following research questions: (1) How similar are peer, self- and teacher ratings of EFL writing?; (2) Do students favour peer ratings?; and (3) Does peer feedback…

Selection of the battery pack parameters for an electric vehicle based on performance requirements

NASA Astrophysics Data System (ADS)

Koniak, M.; Czerepicki, A.

2017-06-01

Each type of vehicle has specific power requirements. Some require a rapid charging, other make long distances between charges, but a common feature is the longest battery life time. Additionally, the battery is influenced by factors such as temperature, depth of discharge and the operation current. The article contain the parameters of chemical cells that should be taken into account during the design of the battery for a specific application. This is particularly important because the batteries are not properly matched and can wear prematurely and cause an additional costs. The method of selecting the correct cell type should take previously discussed features and operating characteristics of the vehicle into account. The authors present methods of obtaining such characteristics along with their assessment and examples. Also there has been described an example of the battery parameters selection based on design assumptions of the vehicle and the expected performance characteristics. Selecting proper battery operating parameters is important due to its impact on the economic result of investments in electric vehicles. For example, for some Li-Ion technologies, the earlier worn out of batteries in a fleet of cruise boats or buses having estimated lifetime of 10 years is not acceptable, because this will cause substantial financial losses for the owner of the rolling stock. The presented method of choosing the right cell technology in the selected application, can be the basis for making the decision on future battery technical parameters.

Commercial grade item (CGI) dedication of MDR relays for nuclear safety related applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, R.K.; Julka, A.; Modi, G.

1994-08-01

MDR relays manufactured by Potter and Brumfield (P and B) have been used in various safety related applications in commercial nuclear power plants. These include emergency safety features (ESF) actuation systems, emergency core cooling systems (ECCS) actuation, and reactor protection systems. The MDR relays manufactured prior to May 1990 showed signs of generic failure due to corrosion and outgassing of coil varnish. P and B has made design changes to correct these problems in relays manufactured after May 1990. However, P and B does not manufacture the relays under any 10CFR50 Appendix B quality assurance (QA) program. They manufacture themore » relays under their commercial QA program and supply these as commercial grade items. This necessitates CGI Dedication of these relays for use in nuclear-safety-related applications. This paper presents a CGI dedication program that has been used to dedicate the MDR relays manufactured after May 1990. The program is in compliance with current Nuclear Regulatory Commission (NRC) and Electric Power Research Institute (EPRI) guidelines and applicable industry standards; it specifies the critical characteristics of the relays, provides the tests and analysis required to verify the critical characteristics, the acceptance criteria for the test results, performs source verification to qualify P and B for its control of the critical characteristics, and provides documentation. The program provides reasonable assurance that the new MDR relays will perform their intended safety functions.« less

"It's all about acceptance": A qualitative study exploring a model of positive body image for people with spinal cord injury.

PubMed

Bailey, K Alysse; Gammage, Kimberley L; van Ingen, Cathy; Ditor, David S

2015-09-01

Using modified constructivist grounded theory, the purpose of the present study was to explore positive body image experiences in people with spinal cord injury. Nine participants (five women, four men) varying in age (21-63 years), type of injury (C3-T7; complete and incomplete), and years post-injury (4-36 years) were recruited. The following main categories were found: body acceptance, body appreciation and gratitude, social support, functional gains, independence, media literacy, broadly conceptualizing beauty, inner positivity influencing outer demeanour, finding others who have a positive body image, unconditional acceptance from others, religion/spirituality, listening to and taking care of the body, managing secondary complications, minimizing pain, and respect. Interestingly, there was consistency in positive body image characteristics reported in this study with those found in previous research, demonstrating universality of positive body image. However, unique characteristics (e.g., resilience, functional gains, independence) were also reported demonstrating the importance of exploring positive body image in diverse groups. Copyright © 2015 Elsevier Ltd. All rights reserved.

Inulin and erythritol as sucrose replacers in short-dough cookies: sensory, fracture, and acoustic properties.

PubMed

Laguna, Laura; Primo-Martín, Cristina; Salvador, Ana; Sanz, Teresa

2013-05-01

The effect of sucrose replacement by erythritol and inulin was studied in short-dough cookies using instrumental and sensory analysis. Two levels of replacement were used (25% and 50% of total sucrose content). Descriptive sensory analysis showed that the sucrose replacement affects visual and texture cookies characteristics, being the differences perceived by mouth greater than by hand. In general, sucrose substitutes produced a less crispy cookie and lower consumer acceptability, with the exception of 25% sucrose replacement by inulin. Matrix aeration attributes such as open and crumbly obtained by trained panel were important properties, and correlated positively with consumer acceptance and negatively with maximum force at break (hardness). Inulin cookies sensory properties were more similar to the control than the erythritol cookies. Also, consumer overall acceptance decreased significantly with sucrose replacement by erythritol. The analysis of texture and sound revealed that inulin cookies were softer whereas erythritol cookies were harder in comparison with control cookies; despite this difference, inulin cookies had similar sound characteristics to erythritol cookies. © 2013 Institute of Food Technologists®

Predicting MCAT Examination Scores.

ERIC Educational Resources Information Center

Dawson-Saunders, Beth; And Others

Acceptable performance on the Medical College Admissions Test (MCAT) is necessary for acceptance into medical school; therefore, students planning a career in medicine and their advisors would benefit by having information useful in predicting performance on this examination. The present study examined the validity of the ACT Assessment as such a…

47 CFR 2.805 - Operation of radio frequency products prior to equipment authorization.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Evaluation of performance and determination of customer acceptability, during developmental, design, or pre... performance and determination of customer acceptability, during developmental, design, or pre-production... under the authority of an experimental radio service authorization issued under part 5 of this chapter...

[Increasing the anode characteristics of sharp-focused Coolidge X-ray tubes by changing from a high to a low vacuum].

PubMed

Kanikovskiĭ, V B

2002-01-01

The anode characteristics of up-to-date sharp-focused Coolidge X-ray tubes are analyzed. The reason for differences in the real anode characteristics from theoretical ones has been found to be a higher tube gas pressure than that accepted. There is evidence that there are new third-class X-tubes--electronic tubes with compensation for negative volumetric charge of electrons with positive gas ions.

Public Attitudes toward Animal Research: A Review

PubMed Central

Ormandy, Elisabeth H.; Schuppli, Catherine A.

2014-01-01

Simple Summary Public engagement on issues related to animal research, including exploration of public attitudes, provides a means of achieving socially acceptable scientific practice and oversight through an understanding of societal values and concerns. Numerous studies have been conducted to explore public attitudes toward animal use, and more specifically the use of animals in research. This paper reviews relevant literature using three categories of influential factors: personal and cultural characteristics, animal characteristics, and research characteristics. Abstract The exploration of public attitudes toward animal research is important given recent developments in animal research (e.g., increasing creation and use of genetically modified animals, and plans for progress in areas such as personalized medicine), and the shifting relationship between science and society (i.e., a move toward the democratization of science). As such, public engagement on issues related to animal research, including exploration of public attitudes, provides a means of achieving socially acceptable scientific practice and oversight through an understanding of societal values and concerns. Numerous studies have been conducted to explore public attitudes toward animal use, and more specifically the use of animals in research. This paper reviews relevant literature using three categories of influential factors: personal and cultural characteristics, animal characteristics, and research characteristics. A critique is given of survey style methods used to collect data on public attitudes, and recommendations are given on how best to address current gaps in public attitudes literature. PMID:26480314

Comparative chromatography-mass spectrometry studies on the antiretroviral drug nevirapine-analytical performance characteristics in human plasma determination.

PubMed

Sichilongo, Kwenga; Chinyama, Mompati; Massele, Amos; Vento, Sandro

2014-01-15

A contrast between the analytical performance characteristics using gas chromatography-mass spectrometry (GC-MS) liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography-ultraviolet (LC-UV) detection for the determination of the antiretroviral drug (ARV) nevirapine (NVP) in fortified human plasma after QuEChERS extraction has been made. Analytical performance characteristics, i.e. linearities, instrument detection limits (IDLs), limits of quantitation (LOQs), method detection limits (MDLs), % mean recoveries and the corresponding relative standard deviations (%RSDs) were estimated using techniques above. Using GC-MS, the correlation coefficients (r(2)) were ≥0.990, which were deemed acceptable linearities. The MDLs ranged between 11.1-29.8μg/L and 13.7-36.0μg/L using helium and hydrogen carrier gases respectively. The LOQs ranged between 16.5-66.7μg/L and 28.4-98.7μg/L using helium and hydrogen carrier gases respectively with a % mean recovery of 83% and %RSD of 4.6%. Using LC-MS and LC-UV, the correlation coefficients (r(2)) were ≥0.990. The MDLs were ranged between 3.14 and 47.1μg/L. The LOQs ranged between 2.85 and 90.0μg/L respectively. The MDLs using GC-MS, LC-MS and LC-UV were below the therapeutic range for NVP in human plasma is considered to be between 2300μg/L (Cmin) and 8000μg/L (Cmax). This study also demonstrated that helium can be substituted with hydrogen which is relatively cheaper and easily obtainable even by use of a generator. Copyright © 2013 Elsevier B.V. All rights reserved.

Are all quantitative postmarketing signal detection methods equal? Performance characteristics of logistic regression and Multi-item Gamma Poisson Shrinker.

PubMed

Berlin, Conny; Blanch, Carles; Lewis, David J; Maladorno, Dionigi D; Michel, Christiane; Petrin, Michael; Sarp, Severine; Close, Philippe

2012-06-01

The detection of safety signals with medicines is an essential activity to protect public health. Despite widespread acceptance, it is unclear whether recently applied statistical algorithms provide enhanced performance characteristics when compared with traditional systems. Novartis has adopted a novel system for automated signal detection on the basis of disproportionality methods within a safety data mining application (Empirica™ Signal System [ESS]). ESS uses two algorithms for routine analyses: empirical Bayes Multi-item Gamma Poisson Shrinker and logistic regression (LR). A model was developed comprising 14 medicines, categorized as "new" or "established." A standard was prepared on the basis of safety findings selected from traditional sources. ESS results were compared with the standard to calculate the positive predictive value (PPV), specificity, and sensitivity. PPVs of the lower one-sided 5% and 0.05% confidence limits of the Bayes geometric mean (EB05) and of the LR odds ratio (LR0005) almost coincided for all the drug-event combinations studied. There was no obvious difference comparing the PPV of the leading Medical Dictionary for Regulatory Activities (MedDRA) terms to the PPV for all terms. The PPV of narrow MedDRA query searches was higher than that for broad searches. The widely used threshold value of EB05 = 2.0 or LR0005 = 2.0 together with more than three spontaneous reports of the drug-event combination produced balanced results for PPV, sensitivity, and specificity. Consequently, performance characteristics were best for leading terms with narrow MedDRA query searches irrespective of applying Multi-item Gamma Poisson Shrinker or LR at a threshold value of 2.0. This research formed the basis for the configuration of ESS for signal detection at Novartis. Copyright © 2011 John Wiley & Sons, Ltd.

Sensorial evolution of cassava flour (Manihot esculenta crantz) added to protein concentrate cassava leaves

PubMed Central

Lima, Elaine C S; Feijo, Márcia B S; Freitas, Maria C J; dos Santos, Edna R; Sabaa-Srur, Armando U O; Moura, Luciana S M

2013-01-01

Cassava is regarded as the nutritional base of populations in developing countries, and flour, product made of cassava, is the most consumed in the world. The cassava leaves are very rich in vegetable proteins, but a big amount is lost in processing the crop. The objective of this study was to do a sensory evaluation of cassava flour to which a protein concentrate obtained from cassava leaves (CPML) was added. The CPML was obtained from cassava leaves by isoelectric precipitation and added to cassava paste for preparation of flour in three parts 2.5, 5, and 10%. The acceptance test was done by 93 consumers of flour, using hedonic scale of 7 points to evaluate characteristics like color, scent, flavor, bitterness, texture, and overall score. By the method of quantitative descriptive analysis (QDA), eight trained tasters evaluated the following characteristics: whitish color, greenish color, cassava flavor, bitter flavor, characteristic flavor, lumpiness, raw texture, leaf scent, and cassava scent. The acceptability test indicated that flour cassava with 2.5 was preferred. Whitish color, greenish color, cassava flavor, bitter flavor, salty flavor, characteristic flavor, lumpiness texture, raw texture, and the smell of the leaves and cassava flour were the main descriptors defined for flour cassava with CPML has better characteristics. PMID:24804041

Willingness to Use Microbicides Is Affected by the Importance of Product Characteristics, Use Parameters, and Protective Properties

PubMed Central

Morrow, Kathleen M.; Fava, Joseph L.; Rosen, Rochelle K.; Vargas, Sara; Barroso, Candelaria; Christensen, Anna L.; Woodsong, Cynthia; Severy, Lawrence

2008-01-01

Background Along with efficacy, a microbicide’s acceptability will be integral to its impact on the pandemic. Understanding Product Characteristics that users find most acceptable and determining who will use which type of product are key to optimizing use effectiveness. Objectives To evaluate psychometrically the Important Microbicide Characteristics (IMC) instrument and examine its relationship to willingness to use microbicides. Results Exploratory and confirmatory factor analyses revealed 2 IMC subscales (Cronbach’s coefficient α: Product Characteristics subscale (α = 0.84) and Protective Properties subscale (α = 0.89)). Significant differences on Product Characteristics subscale scores were found for history of douching (P = 0.002) and employment status (P = 0.001). Whether a woman used a method to prevent pregnancy or sexually transmitted disease (STD) in the last 3 months (P < 0.001) and whether she used a condom during the last vaginal sex episode (P < 0.001) were significantly related to her rating of the importance of microbicides being contraceptive. Product Characteristics (r = 0.21) and Protective Properties (r = 0.27) subscale scores and whether a microbicide had contraceptive properties (r = 0.24) were all significantly associated (P < 0.001) with willingness to use microbicides. Conclusions Formulation and use characteristics and product function(s) affect willingness to use microbicides and should continue to be addressed in product development. The IMC instrument serves as a template for future studies of candidate microbicides. PMID:17325607

Potential Acceptability of a Pediatric Ventilator Management Computer Protocol.

PubMed

Sward, Katherine A; Newth, Christopher J L; Khemani, Robinder G; Page, Kent; Meert, Kathleen L; Carcillo, Joseph A; Shanley, Thomas P; Moler, Frank W; Pollack, Murray M; Dalton, Heidi J; Wessel, David L; Berger, John T; Berg, Robert A; Harrison, Rick E; Doctor, Allan; Dean, J Michael; Holobkov, Richard; Jenkins, Tammara L; Nicholson, Carol E

2017-11-01

To examine issues regarding the granularity (size/scale) and potential acceptability of recommendations in a ventilator management protocol for children with pediatric acute respiratory distress syndrome. Survey/questionnaire. The eight PICUs in the Collaborative Pediatric Critical Care Research Network. One hundred twenty-two physicians (attendings and fellows). None. We used an online questionnaire to examine attitudes and assessed recommendations with 50 clinical scenarios. Overall 80% of scenario recommendations were accepted. Acceptance did not vary by provider characteristics but did vary by ventilator mode (high-frequency oscillatory ventilation 83%, pressure-regulated volume control 82%, pressure control 75%; p = 0.002) and variable adjusted (ranging from 88% for peak inspiratory pressure and 86% for FIO2 changes to 69% for positive end-expiratory pressure changes). Acceptance did not vary based on child size/age. There was a preference for smaller positive end-expiratory pressure changes but no clear granularity preference for other variables. Although overall acceptance rate for scenarios was good, there was little consensus regarding the size/scale of ventilator setting changes for children with pediatric acute respiratory distress syndrome. An acceptable protocol could support robust evaluation of ventilator management strategies. Further studies are needed to determine if adherence to an explicit protocol leads to better outcomes.

Acceptability of Hypothetical Microbicides among Women in Sex Establishments in Rural Areas in Southern China

PubMed Central

Wang, Yu; Liao, Su-Su; Weeks, Margaret R.; Jiang, Jing-Mei; Abbott, Maryann; Zhou, Yue-Jiao; He, Bin; Liu, Wei; Mosack, Katie E.

2010-01-01

Objectives and Goal The objectives of this study were to measure the potential acceptability of a hypothetical microbicide among women in sex establishments in rural areas of Southern China, and demographic, behavioral and social context factors likely to affect microbicide acceptability. Study Design This was a cross-sectional survey, using a quota sampling, among 300 women from sex establishments in three rural towns. An interviewer-administered standardized questionnaire was used to measure the acceptability score of hypothetical microbicides’ characteristics, as well as sexual relationships and behaviors, and other contextual factors. Results Findings showed a generally positive response to microbicides, indicated by an acceptability index score of 2.89 (SD, 0.56, scale of 1–4) in the overall sample. Multivariate analysis shows the acceptability score varied significantly by study sites, type of sex-work establishments, marital status, sex partner type, vaginal product experience, locus of control by partners and locus of control by chance. Conclusions Microbicides may be acceptable among sex workers in rural settings in China; however, contextual factors should be carefully considered in education and promotion of microbicides in the future. PMID:17767093

Is exercise an acceptable and practical therapy for people with or cured of cancer? A systematic review.

PubMed

Maddocks, Matthew; Mockett, Simon; Wilcock, Andrew

2009-06-01

Therapeutic exercise, although potentially beneficial, does not appear acceptable to many cancer patients. A greater understanding of the reasons for this is required. We have systematically reviewed the use of exercise in this group, identifying rates of uptake, adherence and completion along with factors influencing acceptability. Searches were completed using relevant key words. Data on study design, patient group, exercise intervention, patient flow data and reasons for declining or withdrawing from a programme were independently extracted by two researchers. Rates of study uptake, completion and adherence were compared according to dichotomised patient or programme characteristics using Mann Whitney U test (p=0.05). Reasons provided when declining or withdrawing from a study were categorised. Sixty five studies were included. The majority contained groups made up entirely or predominantly of patients with breast cancer offered an aerobic or resistance exercise programme. The median [IQR] rates of uptake, adherence and completion were 63 [33-80]%, 84 [72-93]% and 87 [80-96]%, respectively. No characteristic influenced the proportion of patients taking up or completing a programme. The main reasons for refusal were disinterest or the impracticality of undertaking the programme and for withdrawal, medical complication or deterioration. The invitation to undertake a programme of therapeutic exercise is accepted by about two-thirds of patients. Rates of adherence and completion are relatively high, but overall, only about half of patients offered a programme complete one. There is a need to modify exercise programmes if they are to be acceptable for the majority of patients.

Patient understanding of drug risks: an evaluation of medication guide assessments

PubMed Central

Knox, Caitlin; Hampp, Christian; Willy, Mary; Winterstein, Almut G.; Dal Pan, Gerald

2016-01-01

Purpose When a Medication Guide (MG) is part of Risk Evaluation and Mitigation Strategy (REMS), manufacturers assess the effectiveness of MGs through patient surveys, which have not undergone systematic evaluation. We aimed to characterize knowledge rates from these patient surveys, describe their design and respondent characteristics, and explore predictors of acceptable knowledge rates. Methods We analyzed MG assessments submitted to the Food and Drug Administration from September 2008 through June 2012. We evaluated the prevalence of specific characteristics, and calculated knowledge rates, whereby we defined “acceptable knowledge” when ≥ 80% of respondents correctly answered questions about the primary drug risk. Univariate logistic models were used to investigate the predictors of acceptable knowledge rates. Results We analyzed the first completed MG assessment for each drug with a patient survey, resulting in 66 unique MG assessments. The mean knowledge rate was 63.8%, with 20 MG assessments (30.3%) achieving the 80% threshold. Compared to assessments that did not reach acceptable knowledge rates, those that did were more likely associated with additional REMS elements (e.g. Elements to Assure Safe Use or Communication Plans). Other factors, including mean age, reading or understanding the MG, and being offered or accepting counseling were not associated with knowledge rates. There was considerable variation in the design of MG assessments. Conclusions Most MG assessments did not reach the 80% knowledge threshold, but those associated with additional interventions were more likely to achieve it. Our study highlights the need to improve patient-directed information and the methods of assessing it. PMID:25808393

Acceptance Inspection for Audio Cassette Recorders.

ERIC Educational Resources Information Center

Smith, Edgar A.

A series of inspections for cassette recorders that can be performed to assure that the devices are acceptable is described. The inspections can be completed in 20 minutes and can be performed by instructional personnel. The series of inspection procedures includes tests of the intelligibility of audio, physical condition, tape speed, impulse…

Accountability Policies and Teachers' Acceptance and Usage of School Performance Feedback--A Comparative Study

ERIC Educational Resources Information Center

Maier, Uwe

2010-01-01

This paper implemented a comparative approach to investigate the relationships between test-based school accountability policies in 2 German states and teachers' acceptance and usage of feedback information. Thuringia implemented mandatory tests for secondary schools based on competency modeling and performance data controlled for socioeconomic…

46 CFR 164.023-13 - Production tests and inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Constant Rate of Traverse tensile testing machine, capable of initial clamp separation of ten inches and a... the acceptance testing values but not less than the performance minimums. (2) Length/weight values must be within 5 percent of the acceptance testing values but not less than the performance minimums...

Do Flexible Goal Adjustment and Acceptance Help Preserve Quality of Life in Patients with Multiple Sclerosis?

PubMed

Van Damme, Stefaan; De Waegeneer, Annelies; Debruyne, Jan

2016-06-01

Goal regulation strategies such as flexible goal adjustment and acceptance are believed to be protective factors in persons with chronic illness, but research on their relative contributions to quality of life in multiple sclerosis (MS) is lacking. We aimed to test the idea that acceptance and flexible goal adjustment (in contrast to tenacious goal pursuit) may help preserve the quality of life in persons with MS. A sample of 117 patients with MS was recruited. They completed questionnaires measuring quality of life (physical functioning, psychological distress), acceptance, flexible goal adjustment, and tenacious goal pursuit. Acceptance significantly accounted for variance in all three indexes of quality of life, beyond the effects of demographic and illness characteristics. The role of goal regulation style was less clear. Flexible goal adjustment significantly accounted for psychological well-being only. Surprisingly, tenacious goal pursuit predicted better psychological functioning and less psychological distress. No support was found for the hypothesis that acceptance and flexible goal adjustment would moderate the relation between illness severity and quality of life. The findings suggest the potential importance of acceptance in understanding MS patients' quality of life, although its hypothesized protective function could not be confirmed. Further conceptual work on acceptance and goal regulation style is needed, as well as prospective work investigating their causal status.

[Actuals of the treatment for gender identity disorder at puberty: introducing the suppression of secondary sexual characteristics from psychotherapy].

PubMed

Koh, Jun

2013-01-01

We have treated young patients who feel gender dysphoria to help them accept their feelings of disconnection. We tell them that such feelings of disconnection are never strange, so they do not have to be suppressed, and can be expressed. To do that, the most important thing is that their parents firmly accept the situation, whereas they are the ones who also feel the most anxious. We need to provide psychological support carefully. The first major hurdle for children who have gender dysphoria is elementary school, even if parents are accepting. In elementary school, even children can distinguish beween male and female, and there are many situations where there is separation by gender in school events, so it is difficult to realize the expression of disconnection without school support. Therefore, understanding by school teachers is needed. When a school shows understanding, parental anxiety is alleviated. When a teacher provides firm support, children around them are more likely to accept the situation. Accordingly, support for children who have gender dysphoria consists of three pillars. The first of these is to help children accept their feelings of gender dysphoria and feel that they can be expressed. The second is to help their parents accept gender dysphoria and create an environment where it can be expressed. The third is to encourage schools to actively create such an environment. To deal with concrete problems which children face by providing these approaches promptly assists in promoting the social growth of children. Even if children feeling gender dysphoria have active school lives with such support, they face the following major hurdle : the secondary sexual characteristics. It has been reported in not only foreign countries but also Japan that there are many children who become mentally unbalanced and enter a maladaptive state, such as truancy and self-injury, on secondary sexual development. In the West, it has been reported that suppressive therapy for the secondary sexual characteristics with a GnRH agonist (gonadotropin-releasing hormone agonist) is effective, although it has been little used in Japan, and a mentally balanced state has been maintained in cases we have been involved with. We consider it important to provide support which enables children who have gender dysphoria to overcome this crisis while extensively providing medical treatment.

Effect of fat content on the physical properties and consumer acceptability of vanilla ice cream.

PubMed

Rolon, M Laura; Bakke, Alyssa J; Coupland, John N; Hayes, John E; Roberts, Robert F

2017-07-01

Ice cream is a complex food matrix that contains multiple physical phases. Removal of 1 ingredient may affect not only its physical properties but also multiple sensory characteristics that may or may not be important to consumers. Fat not only contributes to texture, mouth feel, and flavor, but also serves as a structural element. We evaluated the effect of replacing fat with maltodextrin (MD) on select physical properties of ice cream and on consumer acceptability. Vanilla ice creams were formulated to contain 6, 8, 10, 12, and 14% fat, and the difference was made up with 8, 6, 4, 2, and 0% maltodextrin, respectively, to balance the mix. Physical characterization included measurements of overrun, apparent viscosity, fat particle size, fat destabilization, hardness, and melting rate. A series of sensory tests were conducted to measure liking and the intensity of various attributes. Tests were also conducted after 19 weeks of storage at -18°C to assess changes in acceptance due to prolonged storage at unfavorable temperatures. Then, discrimination tests were performed to determine which differences in fat content were detectable by consumers. Mix viscosity decreased with increasing fat content and decreasing maltodextrin content. Fat particle size and fat destabilization significantly increased with increasing fat content. However, acceptability did not differ significantly across the samples for fresh or stored ice cream. Following storage, ice creams with 6, 12, and 14% fat did not differ in acceptability compared with fresh ice cream. However, the 8% fat, 6% MD and 10% fat, 4% MD ice creams showed a significant drop in acceptance after storage relative to fresh ice cream at the same fat content. Consumers were unable to detect a difference of 2 percentage points in fat level between 6 and 12% fat. They were able to detect a difference of 4 percentage points for ice creams with 6% versus 10%, but not for those with 8% versus 12% fat. Removing fat and replacing it with maltodextrin caused minimal changes in physical properties in ice cream and mix and did not change consumer acceptability for either fresh or stored ice cream. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Acceptance Probability (P a) Analysis for Process Validation Lifecycle Stages.

PubMed

Alsmeyer, Daniel; Pazhayattil, Ajay; Chen, Shu; Munaretto, Francesco; Hye, Maksuda; Sanghvi, Pradeep

2016-04-01

This paper introduces an innovative statistical approach towards understanding how variation impacts the acceptance criteria of quality attributes. Because of more complex stage-wise acceptance criteria, traditional process capability measures are inadequate for general application in the pharmaceutical industry. The probability of acceptance concept provides a clear measure, derived from specific acceptance criteria for each quality attribute. In line with the 2011 FDA Guidance, this approach systematically evaluates data and scientifically establishes evidence that a process is capable of consistently delivering quality product. The probability of acceptance provides a direct and readily understandable indication of product risk. As with traditional capability indices, the acceptance probability approach assumes that underlying data distributions are normal. The computational solutions for dosage uniformity and dissolution acceptance criteria are readily applicable. For dosage uniformity, the expected AV range may be determined using the s lo and s hi values along with the worst case estimates of the mean. This approach permits a risk-based assessment of future batch performance of the critical quality attributes. The concept is also readily applicable to sterile/non sterile liquid dose products. Quality attributes such as deliverable volume and assay per spray have stage-wise acceptance that can be converted into an acceptance probability. Accepted statistical guidelines indicate processes with C pk > 1.33 as performing well within statistical control and those with C pk < 1.0 as "incapable" (1). A C pk > 1.33 is associated with a centered process that will statistically produce less than 63 defective units per million. This is equivalent to an acceptance probability of >99.99%.

Not in My Backyard: CCS Sites and Public Perception of CCS.

PubMed

Braun, Carola

2017-12-01

Carbon capture and storage (CCS) is a technology that counteracts climate change by capturing atmospheric emissions of CO 2 from human activities, storing them in geological formations underground. However, CCS also involves major risks and side effects, and faces strong public opposition. The whereabouts of 408 potential CCS sites in Germany were released in 2011. Using detailed survey data on the public perception of CCS, this study quantifies how living close to a potential storage site affects the acceptance of CCS. It also analyzes the influence of other regional characteristics on the acceptance of CCS. The study finds that respondents who live close to a potential CCS site have significantly lower acceptance rates than those who do not. Living in a coal-mining region also markedly decreases acceptance. © 2017 Society for Risk Analysis.

Clinically Useful Spirometry in Preschool-Aged Children: Evaluation of the 2007 American Thoracic Society Guidelines

PubMed Central

Gaffin, Jonathan M.; Shotola, Nancy Lichtenberg; Martin, Thomas R.; Phipatanakul, Wanda

2010-01-01

Rationale In 2007 the American Thoracic Society (ATS) recommended guidelines for acceptability and repeatability for assessing spirometry in preschool children. The authors aim to determine the feasibility of spirometry among children in this age group performing spirometry for the first time in a busy clinical practice. Methods First-time spirometry for children age 4 to 5 years old was selected from the Children’s Hospital Boston Pulmonary Function Test (PFT) database. Maneuvers were deemed acceptable if (1) the flow-volume loop showed rapid rise and smooth descent; (2) the back extrapolated volume (Vbe), the volume leaked by a subject prior to the forced maneuver, was ≤80 ml and 12.5% of forced vital capacity (FVC); and (3) cessation of expiratory flow was at a point ≤10% of peak expiratory flow rate (PEFR). Repeatability was determined by another acceptable maneuver with forced expiratory volume in t seconds (FEVt) and FVC within 10% or 0.1 L of the best acceptable maneuver. Post hoc analysis compared spirometry values for those with asthma and cystic fibrosis to normative values. Results Two hundred and forty-eight preschool children performed spirometry for the first time between August 26, 2006, and August 25, 2008. At least one technically acceptable maneuver was found in 82.3% (n = 204) of the tests performed. Overall, 54% of children were able to perform acceptable and repeatable spirometry based on the ATS criteria. Children with asthma or cystic fibrosis did not have spirometry values that differed significantly from healthy controls. However, up to 29% of the overall cohort displayed at least one abnormal spirometry value. Conclusions Many preschool-aged children are able to perform technically acceptable and repeatable spirometry under normal conditions in a busy clinical setting. Spirometry may be a useful screen for abnormal lung function in this age group. PMID:20653495

Citizen Participation in Patient Prioritization Policy Decisions: An Empirical and Experimental Study on Patients' Characteristics

PubMed Central

Diederich, Adele; Swait, Joffre; Wirsik, Norman

2012-01-01

Health systems worldwide are grappling with the need to control costs to maintain system viability. With the combination of worsening economic conditions, an aging population and reductions in tax revenues, the pressures to make structural changes are expected to continue growing. Common cost control mechanisms, e.g. curtailment of patient access and treatment prioritization, are likely to be adversely viewed by citizens. It seems therefore wise to include them in the decision making processes that lead up to policy changes. In the context of a multilevel iterative mixed-method design a quantitative survey representative of the German population (N = 2031) was conducted to probe the acceptance of priority setting in medicine and to explore the practicability of direct public involvement. Here we focus on preferences for patients' characteristics (medical aspects, lifestyle and socio-economic status) as possible criteria for prioritizing medical services. A questionnaire with closed response options was fielded to gain insight into attitudes toward broad prioritization criteria of patient groups. Furthermore, a discrete choice experiment was used as a rigorous approach to investigate citizens' preferences toward specific criteria level in context of other criteria. Both the questionnaire and the discrete choice experiment were performed with the same sample. The citizens' own health and social situation are included as explanatory variables. Data were evaluated using corresponding analysis, contingency analysis, logistic regression and a multinomial exploded logit model. The results show that some medical criteria are highly accepted for prioritizing patients whereas socio-economic criteria are rejected. PMID:22590619

Expectations for Weight Loss and Willingness to Accept Risk Among Patients Seeking Weight Loss Surgery

PubMed Central

Wee, Christina C.; Hamel, Mary Beth; Apovian, Caroline M.; Blackburn, George L.; Bolcic-Jankovic, Dragana; Colten, Mary Ellen; Hess, Donald T.; Huskey, Karen W.; Marcantonio, Edward R.; Schneider, Benjamin E.; Jones, Daniel B.

2015-01-01

Importance Weight loss surgery (WLS) has been shown to produce long-term weight loss but is not risk free or universally effective. The weight loss expectations and willingness to undergo perioperative risk among patients seeking WLS remain unknown. Objectives To examine the expectations and motivations of WLS patients and the mortality risks they are willing to undertake and to explore the demographic characteristics, clinical factors, and patient perceptions associated with high weight loss expectations and willingness to assume high surgical risk. Design We interviewed patients seeking WLS and conducted multivariable analyses to examine the characteristics associated with high weight loss expectations and the acceptance of mortality risks of 10% or higher. Setting Two WLS centers in Boston. Participants Six hundred fifty-four patients. Main Outcome Measures Disappointment with a sustained weight loss of 20% and willingness to accept a mortality risk of 10% or higher with WLS. Results On average, patients expected to lose as much as 38% of their weight after WLS and expressed disappointment if they did not lose at least 26%. Most patients (84.8%) accepted some risk of dying to undergo WLS, but only 57.5% were willing to undergo a hypothetical treatment that produced a 20% weight loss. The mean acceptable mortality risk to undergo WLS was 6.7%, but the median risk was only 0.1%; 19.5% of all patients were willing to accept a risk of at least 10%. Women were more likely than men to be disappointed with a 20% weight loss but were less likely to accept high mortality risk. After initial adjustment, white patients appeared more likely than African American patients to have high weight loss expectations and to be willing to accept high risk. Patients with lower quality-of-life scores and those who perceived needing to lose more than 10% and 20% of weight to achieve “any” health benefits were more likely to have unrealistic weight loss expectations. Low quality-of-life scores were also associated with willingness to accept high risk. Conclusions and Relevance Most patients seeking WLS have high weight loss expectations and believe they need to lose substantial weight to derive any health benefits. Educational efforts may be necessary to align expectations with clinical reality. PMID:23553327

Depleted Uranium: Technical Brief

EPA Pesticide Factsheets

This technical brief provides accepted data and references to additional sources for radiological and chemical characteristics, health risks and references for both the monitoring and measurement, and applicable treatment techniques for depleted uranium.

Design and protocol of the weight loss lottery- a cluster randomized trial.

PubMed

van der Swaluw, Koen; Lambooij, Mattijs S; Mathijssen, Jolanda J P; Schipper, Maarten; Zeelenberg, Marcel; Polder, Johan J; Prast, Henriëtte M

2016-07-01

People often intend to exercise but find it difficult to attend their gyms on a regular basis. At times, people seek and accept deadlines with consequences to realize their own goals (i.e. commitment devices). The aim of our cluster randomized controlled trial is to test whether a lottery-based commitment device can promote regular gym attendance. The winners of the lottery always get feedback on the outcome but can only claim their prize if they attended their gyms on a regular basis. In this paper we present the design and baseline characteristics of a three-arm trial which is performed with 163 overweight participants in six in-company fitness centers in the Netherlands. Copyright © 2016 Elsevier Inc. All rights reserved.

Evaluation and comparison of alternative designs for water/solid-waste processing systems for spacecraft

NASA Technical Reports Server (NTRS)

Spurlock, J. M.

1975-01-01

Promising candidate designs currently being considered for the management of spacecraft solid waste and waste-water materials were assessed. The candidate processes were: (1) the radioisotope thermal energy evaporation/incinerator process; (2) the dry incineration process; and (3) the wet oxidation process. The types of spacecraft waste materials that were included in the base-line computational input to the candidate systems were feces, urine residues, trash and waste-water concentrates. The performance characteristics and system requirements for each candidate process to handle this input and produce the specified acceptable output (i.e., potable water, a storable dry ash, and vapor phase products that can be handled by a spacecraft atmosphere control system) were estimated and compared. Recommendations are presented.

A study of the suitability of ferrite for use in low-field insertion devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, K.; Hassenzahl, W.V.

1995-02-01

Most insertion devices built to date use rare-earth permanent-magnet materials, which have a high remanent field and are more expensive than many other permanent-magnet materials. Low-field insertion devices could use less-expensive, lower performance magnetic materials if they had suitable magnetic characteristics. These materials must be resistant to demagnetization during construction and operation of the insertion device, have uniform magnetization, possess low minor-axis magnetic moments, and have small minor field components on the surfaces. This paper describes an investigation to determine if ferrite possesses magnetic qualities suitable for insertion device applications. The type of ferrite investigated, MMPA Ceramic 8 from Stackpolemore » Inc., was found to be acceptable for insertion device applications.« less

Spacecraft on-board SAR image generation for EOS-type missions

NASA Technical Reports Server (NTRS)

Liu, K. Y.; Arens, W. E.; Assal, H. M.; Vesecky, J. F.

1987-01-01

Spacecraft on-board synthetic aperture radar (SAR) image generation is an extremely difficult problem because of the requirements for high computational rates (usually on the order of Giga-operations per second), high reliability (some missions last up to 10 years), and low power dissipation and mass (typically less than 500 watts and 100 Kilograms). Recently, a JPL study was performed to assess the feasibility of on-board SAR image generation for EOS-type missions. This paper summarizes the results of that study. Specifically, it proposes a processor architecture using a VLSI time-domain parallel array for azimuth correlation. Using available space qualifiable technology to implement the proposed architecture, an on-board SAR processor having acceptable power and mass characteristics appears feasible for EOS-type applications.

Development and testing of painometer: a smartphone app to assess pain intensity.

PubMed

de la Vega, Rocío; Roset, Roman; Castarlenas, Elena; Sánchez-Rodríguez, Elisabet; Solé, Ester; Miró, Jordi

2014-10-01

Electronic and information technologies are increasingly being used to assess pain. This study aims to 1) introduce Painometer, a smartphone app that helps users to assess pain intensity, and 2) report on its usability (ie, user performance and satisfaction) and acceptability (ie, the willingness to use it) when it is made available to health care professionals and nonprofessionals. Painometer includes 4 well-known pain intensity scales: the Faces Pain Scale-Revised, the numerical rating scale-11, the Coloured Analogue Scale, and the visual analog scale. Scores reported with these scales, when used in their traditional format, have shown to be valid and reliable. The app was tested in a sample of 24 health care professionals and 30 nonprofessionals. Two iterative usability cycles were conducted with a qualitative usability testing approach and a semistructured interview. The participants had an average of 10 years' experience in using computers. The domains measured were ease of use, errors in usage, most popular characteristics, suggested changes, and acceptability. Adding instructions and changing format and layout details solved the usability problems reported in cycle 1. No further problems were reported in cycle 2. Painometer has been found to be a useful, user-friendly app that may help to improve the accuracy of pain intensity assessment. Painometer, a smartphone app to assess pain intensity, shows good usability and acceptability properties when used by health care professionals and nonprofessionals. Copyright © 2014 American Pain Society. Published by Elsevier Inc. All rights reserved.

Psychometric properties of the Portuguese version of the Acceptance and Action Questionnaire-Trauma Specific (AAQ-TS): A study with Portuguese Colonial War Veterans.

PubMed

Pinto-Gouveia, José; Carvalho, Teresa; Cunha, Marina; Duarte, Joana; Walser, Robyn D

2015-10-01

The Acceptance and Action Questionnaire-Trauma Specific (AAQ-TS) is a self-report measure designed to assess-trauma-related psychological (in)flexibility, as conceptualized in Acceptance and Commitment Therapy. However, there are no studies to date regarding its psychometric properties. This study explores such properties in the Portuguese version of the AAQ-TS, in Portuguese Colonial War Veterans. A Principal Components Analysis (PCA) was conducted in a sample from the general population of war Veterans (N=371). Confirmatory Factor Analysis (CFA) as well as reliability and convergent validity studies were performed in a different sample from the same population (N=312). For the discriminant validity a clinical sample with a war-related PTSD (N=42) and a non-clinical sample without PTSD (N=44) were used. The CFA suggested a re-specified 15-item model with good global adjustment and factorial validity. The AAQ-TS showed internal consistency, a good temporal reliability, convergent validity with psychopathological symptoms (related to PTSD, anxiety, depression and stress) and peritraumatic dissociation (altered awareness and depersonalization/derealization). The questionnaire also discriminates between war Veterans with and without a PTSD diagnosis. The major limitation relates to the samples' characteristics and sampling methods, which can limit the generalization of results. The Portuguese version of the AAQ-TS is a reliable and valid measure to assess experiential avoidance related to trauma in Portuguese Colonial War Veterans. Copyright © 2015 Elsevier B.V. All rights reserved.

CT colonography: accuracy, acceptance, safety and position in organised population screening.

PubMed

de Haan, Margriet C; Pickhardt, Perry J; Stoker, Jaap

2015-02-01

Colorectal cancer (CRC) is the second most common cancer and second most common cause of cancer-related deaths in Europe. The introduction of CRC screening programmes using stool tests and flexible sigmoidoscopy, have been shown to reduce CRC-related mortality substantially. In several European countries, population-based CRC screening programmes are ongoing or being rolled out. Stool tests like faecal occult blood testing are non-invasive and simple to perform, but are primarily designed to detect early invasive cancer. More invasive tests like colonoscopy and CT colonography (CTC) aim at accurately detecting both CRC and cancer precursors, thus providing for cancer prevention. This review focuses on the accuracy, acceptance and safety of CTC as a CRC screening technique and on the current position of CTC in organised population screening. Based on the detection characteristics and acceptability of CTC screening, it might be a viable screening test. The potential disadvantage of radiation exposure is probably overemphasised, especially with newer technology. At this time-point, it is not entirely clear whether the detection of extracolonic findings at CTC is of net benefit and is cost effective, but with responsible handling, this may be the case. Future efforts will seek to further improve the technique, refine appropriate diagnostic algorithms and study cost-effectiveness. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

GFO and JASON Altimeter Engineering Assessment Report. Update: GFO--Acceptance to December 27, 2007, JASON--Acceptance to December 26, 2007. Version 1: June 2008

NASA Technical Reports Server (NTRS)

Conger, A. M.; Hancock, D. W.; Hayne, G. S.; Brooks, R. L.

2008-01-01

The purpose of this document is to present and document GEOSAT Follow-On (GFO) performance analyses and results. This is the eighth Assessment Report since the initial report. This report extends the performance assessment since acceptance to 27 December 2007. Since launch, a variety of GFO performance studies have been performed: Appendix A provides an accumulative index of those studies. We began the inclusion of analyses of the JASON altimeter after the end of the Topographic Experiment (TOPEX) mission. Prior to this, JASON and TOPEX were compared during our assessment of theTOPEX altimeter. With the end of the TOPEX mission, we developed methods to report on JASON as it relates to GFO.

Rape Myth Acceptance in Contemporary Times: A Comparative Study of University Students in India and the United Kingdom.

PubMed

Barn, Ravinder; Powers, Ráchael A

2018-05-01

Much of the literature on rape, victim blaming, and rape myth acceptance is focused on the United States, and there is a general dearth of such scholarly activity in other countries. This article offers insights on university students' perspectives in two new country contexts-India and the United Kingdom. A total of 693 students contributed to the data collection for this study. Rape myth acceptance was fairly low for both countries, however, students in India were more likely to endorse rape myths. Several demographic characteristics were significant for rape myth acceptance in each country. This study makes an important contribution to the extant literature to address paucity of knowledge and promote understandings to help develop country-specific and appropriate policy, practice, and education and awareness programs. In particular, the study provides novel comparative findings on rape myth acceptance in new country contexts to help advance academic thinking in this area of work.

Sexual and Reproductive Health Education Needs, Gender Roles Attitudes and Acceptance of Couple Violence According to Engaged Men and Women.

PubMed

Terzioglu, Fusun; Kok, Gulsah; Guvenc, Gulten; Ozdemir, Funda; Gonenc, Ilknur Munevver; Hicyilmaz, Basak Demirtas; Sezer, Neslihan Yılmaz

2018-04-01

This descriptive study was aimed to evaluate the attitudes of the engaged men and women who are of legal age to marry towards gender roles and acceptance of couple violence, and determine their sexual/reproductive health education needs. It was conducted in two marriage registry offices in Ankara, Turkey. The study sample consisted of 740 participants. Data were collected by using semi-structured form, Gender Roles Attitude Scale and Acceptance of Couple Violence Scale. It was found that the engaged couples had educational needs concerning sexual/reproductive health; socio-demographic characteristics such as gender, age, education, residence, and income level created significant differences in the attitudes related to accepting gender roles and violence; and having an egalitarian attitude towards gender roles decreased the rate of accepting violence between the couples. Results indicate that premarital counseling is a promising strategy to support engaged couples' sexual/reproductive health needs, and increase their awareness about gender based couple violence in communities.

The Influence of Nurses' Demographics on Patient Participation in Hospitals: A Cross-Sectional Study.

PubMed

Malfait, Simon; Eeckloo, Kristof; Van Hecke, Ann

2017-12-01

Patient participation is an important issue in contemporary healthcare as it improves quality of care and enhances positive health outcomes. The participation of patients is mainly initiated by the nurses' willingness to share their power and responsibility, but knowledge on nurses' demographic characteristics influencing this behavior is nonexistent. This knowledge is essential to understand and improve patient participation. To determine if nurses' demographic characteristics influence their willingness to engage in patient participation. A cross-sectional multicenter study in 22 general and three university hospitals with 997 nurses was performed. The Patient Participation Culture Tool for healthcare workers, which measures patient participation behavior, was used. Multilevel analysis, taking into account the difference in wards and hospitals, was used to identify the influence of demographic characteristics. A position as supervisor (range: p < .001-.028) and a higher level of education (range: p = <.001-.012) show significant higher scores. Younger nurses seem to be more reluctant in accepting a collaborative patient role (p = .002) and coping with more active patient behavior (p < .001). This new role was less accepted by nurses on geriatric wards (p = .013), who also showed less sharing of information with their patients (p < .001). Age and level of education influence nurses' willingness to share power and responsibility with their patients, perhaps indicating that patient participation behavior is an advanced nursing skill and multifaceted interventions, are needed for optimal implementation. Moreover, supervising nurses have different perceptions on patient participation and possibly regard patient participation as an easier task than their team members. This could lead to misunderstandings about the expectations toward patient participation in daily practice, leading to struggles with their nursing staff. Both findings implicate that implementing patient participation on a wide scale is more difficult than expected, which is conflicting with the widespread societal demand for more participation. © 2017 Sigma Theta Tau International.

End-product quality characteristics and consumer response of chickpea flour-based gluten-free muffins containing corn starch and egg white.

PubMed

Alvarez, María Dolores; Herranz, Beatriz; Jiménez, María José; Canet, Wenceslao

2017-12-01

The objective of this work was to study changes in technological characteristics and sensory properties of gluten-free muffins when using chickpea flour (CF) alone and/or with partial CF replacement by corn starch (CS). The effect of partial whole egg replacement by egg white (EW) was also investigated. Four different CF:CS ratios (100:0, 75:25, 50:50, and 25:75) were used in formulations with and without incorporated EW, and compared with wheat flour (WF) muffins (0:0). Muffins prepared from CF alone had lower hardness, springiness, cohesiveness, chewiness, and resilience than control ones. However, reducing protein content by CS addition significantly increased texture profile analysis parameters of muffin crumb. Muffins prepared with 25:75 ratio had a structure with springiness similar to muffins made with WF but were too hard. Reducing whole egg content by partial replacement with EW also significantly increased muffin hardness. Flash profile performed by consumers showed a clear discrimination of muffins according to CF:CS ratio. Muffins containing both CF and CS at 50:50 ratio had the same high overall acceptability and purchase intention as gluten ones. Gluten-free CF-based muffins of satisfactory quality can be manufactured by CS incorporation, either with or without EW. By decreasing and increasing protein and starch contents of chickpea flour (CF) by incorporation of corn starch (CS), muffins formulated from a combination of CF and CS at different CF:CS ratios, either with or without partial replacement of whole egg with egg white, result in high-quality muffins with similar technological and sensory characteristics to those of their gluten counterparts. Sensory overall acceptability and purchase intention of muffins made with a 50:50 ratio did not differ significantly from those of the controls. These findings will benefit celiac population, while promoting the value and utilization of pulses through muffins. © 2017 Wiley Periodicals, Inc.

Flammability, Odor, Offgassing, and Compatibility Requirements and Test Procedures for Materials in Environments that Support Combustion

NASA Technical Reports Server (NTRS)

1998-01-01

This handbook establishes NASA program requirements for evaluation, testing, and selection of materials to preclude unsafe conditions related to flammability, odor, offgassing, and fluid compatibility. Materials intended for use in space vehicles, specified test facilities, and specified ground support equipment (GSE) must meet the requirements of this document. Additional materials performance requirements may be specified in other program or NASA center specific documentation. Responsible NASA centers materials organizations must include applicable requirements of this document in their materials control programs. Materials used in habitable areas of spacecraft, including the materials of the spacecraft, stowed equipment, and experiments, must be evaluated for flammability, odor, and offgassing characteristics. All materials used in other areas must be evaluated for flammability characteristics. In addition, materials that are exposed to liquid oxygen (LOX), gaseous oxygen (GOX), and other reactive fluids' must be evaluated for compatibility with the fluid in their use application. Materials exposed to pressurized breathing gases also must be evaluated for odor and offgassing characteristics. The worst-case anticipated use environment (most hazardous pressure, temperature, material thickness, and fluid exposure conditions) must be used in the evaluation process. Materials that have been shown to meet the criteria of the required tests are acceptable for further consideration in design. Whenever possible, materials should be selected that have already been shown to meet the test criteria in the use environment. Existing test data are compiled in the NASA Marshall Space Flight Center (MSFC) Materials and Processes Technical Information System (MAPTIS) and published periodically as the latest revision of a joint document with Johnson Space Center (JSC), MSFC-HDBK-527/JSC 09604. MAPTIS can be accessed by computer datalink. Systems containing materials that have not been tested or do not meet the criteria of the required tests must be verified to be acceptable in the use configuration by analysis or testing. This verification rationale must be documented and submitted to the responsible NASA center materials organization for approval.

Factors influencing nurses' acceptance of hospital information systems in Iran: application of the Unified Theory of Acceptance and Use of Technology.

PubMed

Sharifian, Roxana; Askarian, Fatemeh; Nematolahi, Mohtaram; Farhadi, Payam

User acceptance is a precondition for successful implementation of hospital information systems (HISs). Increasing investment in information technology by healthcare organisations internationally has made user acceptance an important issue in technology implementation and management. Despite the increased focus on hospital information systems, there continues to be user resistance. The present study aimed to investigate the factors affecting hospital information systems nurse-user acceptance of HISs, based on the Unified Theory of Acceptance and Use of Technology (UTAUT), in the Shiraz University of Medical Sciences teaching hospitals. A descriptive-analytical research design was employed to study nurses' adoption and use of HISs. Data collection was undertaken using a cross-sectional survey of nurses (n=303). The research model was examined using the LISREL path confirmatory modeling. The results demonstrated that the nurses' behavioural intention (BI) to use hospital information systems was predicted by Performance Expectancy (PE) (β= 2.34, p<0.01), Effort Expectancy (EE) (β= 2.21, p<0.01), Social Influence (SI) (β= 2.63, p<0.01) and Facilitating Conditions (FC) (β= 2.84, p<0.01). The effects of these antecedents of BI explained 72.8% of the variance in nurses' intention to use hospital information systems (R2 = 0.728). Application of the research model suggested that nurses' acceptance of HISs was influenced by performance expectancy, effort expectancy, social influence and facilitating conditions, with performance expectancy having the strongest effect on user intention.

Dynamic analysis of a photovoltaic power system with battery storage capability

NASA Technical Reports Server (NTRS)

Merrill, W. C.; Blaha, R. J.; Pickrell, R. L.

1979-01-01

A photovolataic power system with a battery storage capability is analyzed. A dual battery current control concept is proposed, which enables the battery to either supply or accept power depending upon system environment and load conditions. A simulation of the power system, including the battery current control, is developed and evaluated. The evaulation demonstrate the visbility of the battery control concept of switch the battery from a charge to discharge mode and back as required by load and environmental conditions. An acceptable system operation is demonstrated over the entire insolation range. Additionally, system sensitivity, bandwidth, and damping characteristics of the battery control are shown to be acceptable for a projected hardware implementation.

Crew Selection and Training

NASA Technical Reports Server (NTRS)

Helmreich, Robert L.

1996-01-01

This research addressed a number of issues relevant to the performance of teams in demanding environments. Initial work, conducted in the aviation analog environment, focused on developing new measures of performance related attitudes and behaviors. The attitude measures were used to assess acceptance of concepts related to effective teamwork and personal capabilities under stress. The behavioral measures were used to evaluate the effectiveness of flight crews operating in commercial aviation. Assessment of team issues in aviation led further to the evaluation and development of training to enhance team performance. Much of the work addressed evaluation of the effectiveness of such training, which has become known as Crew Resource Management (CRM). A second line of investigation was into personality characteristics that predict performance in challenging environments such as aviation and space. A third line of investigation of team performance grew out of the study of flight crews in different organizations. This led to the development of a theoretical model of crew performance that included not only individual attributes such as personality and ability, but also organizational and national culture. A final line of investigation involved beginning to assess whether the methodologies and measures developed for the aviation analog could be applied to another domain -- the performance of medical teams working in the operating room.

What does the multiple mini interview have to offer over the panel interview?

PubMed

Pau, Allan; Chen, Yu Sui; Lee, Verna Kar Mun; Sow, Chew Fei; De Alwis, Ranjit

2016-01-01

This paper compares the panel interview (PI) performance with the multiple mini interview (MMI) performance and indication of behavioural concerns of a sample of medical school applicants. The acceptability of the MMI was also assessed. All applicants shortlisted for a PI were invited to an MMI. Applicants attended a 30-min PI with two faculty interviewers followed by an MMI consisting of ten 8-min stations. Applicants were assessed on their performance at each MMI station by one faculty. The interviewer also indicated if they perceived the applicant to be a concern. Finally, applicants completed an acceptability questionnaire. From the analysis of 133 (75.1%) completed MMI scoresheets, the MMI scores correlated statistically significantly with the PI scores (r=0.438, p=0.001). Both were not statistically associated with sex, age, race, or pre-university academic ability to any significance. Applicants assessed as a concern at two or more stations performed statistically significantly less well at the MMI when compared with those who were assessed as a concern at one station or none at all. However, there was no association with PI performance. Acceptability scores were generally high, and comparison of mean scores for each of the acceptability questionnaire items did not show statistically significant differences between sex and race categories. Although PI and MMI performances are correlated, the MMI may have the added advantage of more objectively generating multiple impressions of the applicant's interpersonal skill, thoughtfulness, and general demeanour. Results of the present study indicated that the MMI is acceptable in a multicultural context.

What does the multiple mini interview have to offer over the panel interview?

PubMed Central

Pau, Allan; Chen, Yu Sui; Lee, Verna Kar Mun; Sow, Chew Fei; Alwis, Ranjit De

2016-01-01

Introduction This paper compares the panel interview (PI) performance with the multiple mini interview (MMI) performance and indication of behavioural concerns of a sample of medical school applicants. The acceptability of the MMI was also assessed. Materials and methods All applicants shortlisted for a PI were invited to an MMI. Applicants attended a 30-min PI with two faculty interviewers followed by an MMI consisting of ten 8-min stations. Applicants were assessed on their performance at each MMI station by one faculty. The interviewer also indicated if they perceived the applicant to be a concern. Finally, applicants completed an acceptability questionnaire. Results From the analysis of 133 (75.1%) completed MMI scoresheets, the MMI scores correlated statistically significantly with the PI scores (r=0.438, p=0.001). Both were not statistically associated with sex, age, race, or pre-university academic ability to any significance. Applicants assessed as a concern at two or more stations performed statistically significantly less well at the MMI when compared with those who were assessed as a concern at one station or none at all. However, there was no association with PI performance. Acceptability scores were generally high, and comparison of mean scores for each of the acceptability questionnaire items did not show statistically significant differences between sex and race categories. Conclusions Although PI and MMI performances are correlated, the MMI may have the added advantage of more objectively generating multiple impressions of the applicant's interpersonal skill, thoughtfulness, and general demeanour. Results of the present study indicated that the MMI is acceptable in a multicultural context. PMID:26873337

What does the multiple mini interview have to offer over the panel interview?

PubMed

Pau, Allan; Chen, Yu Sui; Lee, Verna Kar Mun; Sow, Chew Fei; Alwis, Ranjit De

2016-01-01

Introduction This paper compares the panel interview (PI) performance with the multiple mini interview (MMI) performance and indication of behavioural concerns of a sample of medical school applicants. The acceptability of the MMI was also assessed. Materials and methods All applicants shortlisted for a PI were invited to an MMI. Applicants attended a 30-min PI with two faculty interviewers followed by an MMI consisting of ten 8-min stations. Applicants were assessed on their performance at each MMI station by one faculty. The interviewer also indicated if they perceived the applicant to be a concern. Finally, applicants completed an acceptability questionnaire. Results From the analysis of 133 (75.1%) completed MMI scoresheets, the MMI scores correlated statistically significantly with the PI scores (r=0.438, p=0.001). Both were not statistically associated with sex, age, race, or pre-university academic ability to any significance. Applicants assessed as a concern at two or more stations performed statistically significantly less well at the MMI when compared with those who were assessed as a concern at one station or none at all. However, there was no association with PI performance. Acceptability scores were generally high, and comparison of mean scores for each of the acceptability questionnaire items did not show statistically significant differences between sex and race categories. Conclusions Although PI and MMI performances are correlated, the MMI may have the added advantage of more objectively generating multiple impressions of the applicant's interpersonal skill, thoughtfulness, and general demeanour. Results of the present study indicated that the MMI is acceptable in a multicultural context.

45 CFR 73.735-505 - Acceptance of awards and prizes.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Employees may accept awards, including cash awards, given in recognition of a meritorious public... employee in the performance of his or her offical duties, advice about the acceptance of it should be... trophies, entertainment, rewards, and prizes given to competitors in contests or events which are open to...

45 CFR 73.735-505 - Acceptance of awards and prizes.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Employees may accept awards, including cash awards, given in recognition of a meritorious public... employee in the performance of his or her offical duties, advice about the acceptance of it should be... trophies, entertainment, rewards, and prizes given to competitors in contests or events which are open to...

Understanding the Influence of Emotions and Reflection upon Multi-Source Feedback Acceptance and Use

ERIC Educational Resources Information Center

Sargeant, Joan; Mann, Karen; Sinclair, Douglas; Van der Vleuten, Cees; Metsemakers, Job

2008-01-01

Introduction: Receiving negative performance feedback can elicit negative emotional reactions which can interfere with feedback acceptance and use. This study investigated emotional responses of family physicians' participating in a multi-source feedback (MSF) program, sources of these emotions, and their influence upon feedback acceptance and…

Visual and motion cueing in helicopter simulation

NASA Technical Reports Server (NTRS)

Bray, R. S.

1985-01-01

Early experience in fixed-cockpit simulators, with limited field of view, demonstrated the basic difficulties of simulating helicopter flight at the level of subjective fidelity required for confident evaluation of vehicle characteristics. More recent programs, utilizing large-amplitude cockpit motion and a multiwindow visual-simulation system have received a much higher degree of pilot acceptance. However, none of these simulations has presented critical visual-flight tasks that have been accepted by the pilots as the full equivalent of flight. In this paper, the visual cues presented in the simulator are compared with those of flight in an attempt to identify deficiencies that contribute significantly to these assessments. For the low-amplitude maneuvering tasks normally associated with the hover mode, the unique motion capabilities of the Vertical Motion Simulator (VMS) at Ames Research Center permit nearly a full representation of vehicle motion. Especially appreciated in these tasks are the vertical-acceleration responses to collective control. For larger-amplitude maneuvering, motion fidelity must suffer diminution through direct attenuation through high-pass filtering washout of the computer cockpit accelerations or both. Experiments were conducted in an attempt to determine the effects of these distortions on pilot performance of height-control tasks.

Flavor lexicon for sensory descriptive profiling of different rice types.

PubMed

Limpawattana, M; Shewfelt, R L

2010-05-01

Rice flavor is a significant factor in determining quality and consumer acceptability as exemplified by scented rice, which is highly favored and commands a price premium. Sensory descriptive analysis has primarily been performed to assess rice flavor characteristics, but these studies feature only a limited lexicon for characterizing specific flavors or the range of flavor types is limited. This study was undertaken to establish a descriptive lexicon with reference standards for describing the flavor properties of a broad spectrum of rice types and use the developed lexicon to characterize which sensory attributes are most important in rice flavor quality. A rice flavor lexicon consisting of 24 descriptive notes was developed and expanded by 8 trained sensory panelists to characterize the flavor of cooked rice differing in terms of forms, types, and specialty (n = 36). Of these 24 descriptive terms, 19 were aromatic notes and 5 were fundamental tastes and oral feeling factors. Eighteen aromatic terms were significantly present in most rice samples whereas some descriptors exhibited unique characteristics of a specific-rice type. Subsequent multivariate analysis indicated that 18 descriptive terms were required to fully understand the characteristics of rice flavor in greater details. This lexicon covered a wider range of rice samples than in the previous studies and will facilitate targeting the characteristic notes important to rice processors as well as producers.

Requirements and Techniques for Developing and Measuring Simulant Materials

NASA Technical Reports Server (NTRS)

Rickman, Doug; Owens, Charles; Howard, Rick

2006-01-01

The 1989 workshop report entitled Workshop on Production and Uses of Simulated Lunar Materials and the Lunar Regolith Simulant Materials: Recommendations for Standardization, Production, and Usage, NASA Technical Publication identify and reinforced a need for a set of standards and requirements for the production and usage of the lunar simulant materials. As NASA need prepares to return to the moon, a set of requirements have been developed for simulant materials and methods to produce and measure those simulants have been defined. Addressed in the requirements document are: 1) a method for evaluating the quality of any simulant of a regolith, 2) the minimum Characteristics for simulants of lunar regolith, and 3) a method to produce lunar regolith simulants needed for NASA's exploration mission. A method to evaluate new and current simulants has also been rigorously defined through the mathematics of Figures of Merit (FoM), a concept new to simulant development. A single FoM is conceptually an algorithm defining a single characteristic of a simulant and provides a clear comparison of that characteristic for both the simulant and a reference material. Included as an intrinsic part of the algorithm is a minimum acceptable performance for the characteristic of interest. The algorithms for the FoM for Standard Lunar Regolith Simulants are also explicitly keyed to a recommended method to make lunar simulants.

Validation and testing of the Acceptability E-scale for Web-based patient-reported outcomes in cancer care

PubMed Central

Tariman, Joseph D.; Berry, Donna L.; Halpenny, Barbara; Wolpin, Seth; Schepp, Karen

2010-01-01

The performance of the Acceptability E-scale was tested in a sample of 627 adult and older adult patients from various oncology clinics who completed an electronic symptoms survey. The revised Acceptability E-scale has strong psychometric properties and can be useful in assessing the acceptability and usability of computerized health-related programs in oncology and other health population. PMID:20974066

Field evaluation of the 22 rapid diagnostic tests for community management of malaria with artemisinin combination therapy in Cameroon.

PubMed

Ali, Innocent M; Bigoga, Jude D; Forsah, Dorothy A; Cho-Ngwa, Fidelis; Tchinda, Vivian; Moor, Vicky Ama; Fogako, Josephine; Nyongalema, Philomena; Nkoa, Theresa; Same-Ekobo, Albert; Mbede, Joseph; Fondjo, Etienne; Mbacham, Wilfred F; Leke, Rose G F

2016-01-20

All suspected cases of malaria should receive a diagnostic test prior to treatment with artemisinin-based combinations based on the new WHO malaria treatment guidelines. This study compared the accuracy and some operational characteristics of 22 different immunochromatographic antigen capture point-of- malaria tests (RDTs) in Cameroon to inform test procurement prior to deployment of artemisinin-based combinations for malaria treatment. One hundred human blood samples (50 positive and 50 negative) collected from consenting febrile patients in two health centres at Yaoundé were used for evaluation of the 22 RDTs categorized as "Pf Only" (9) or "Pf + PAN" (13) based on parasite antigen captured [histidine rich protein II (HRP2) or lactate dehydrogenase (pLDH) or aldolase]. RDTs were coded to blind technicians performing the tests. The sensitivity, specificity, and predictive values of the positive and negative tests (PPV and NPV) as well as the likelihood ratios were assessed. The reliability and some operational characteristics were determined as the mean values from two assessors, and the Cohen's kappa statistic was then used to compare agreement. Light microscopy was the referent. Of all RDTs tested, 94.2 % (21/22) had sensitivity values greater than 90% among which 14 (63.6%) were 'Pf + PAN' RDTs. The specificity was generally lower than the sensitivity for all RDTs and poorer for "Pf Only" RDTs. The predictive values and likelihood ratios were better for non-HRP2 analytes for "Pf + PAN" RDTs. The Kappa value for most of the tests obtained was around 67% (95% CI 50-69%), corresponding to a moderate agreement. Overall, 94.2% (21/22) of RDTs tested had accuracy within the range recommended by the WHO, while one performed poorly, below acceptable levels. Seven "Pf + PAN" and 3 "Pf Only" RDTs were selected for further assessment based on performance characteristics. Harmonizing RDT test presentation and procedures would prevent mistakes of test performance and interpretation.

Organizational performance impacting patient satisfaction in Ontario hospitals: a multilevel analysis.

PubMed

Koné Péfoyo, Anna J; Wodchis, Walter P

2013-12-05

Patient satisfaction in health care constitutes an important component of organizational performance in the hospital setting. Satisfaction measures have been developed and used to evaluate and improve hospital performance, quality of care and physician practice. In order to direct improvement strategies, it is necessary to evaluate both individual and organizational factors that can impact patients' perception of care. The study aims were to determine the dimensions of patient satisfaction, and to analyze the individual and organizational determinants of satisfaction dimensions in hospitals. We used patient and hospital survey data as well as administrative data collected for a 2008 public hospital report in Ontario, Canada. We evaluated the clustering of patient survey items with exploratory factor analysis and derived plausible dimensions of satisfaction. A two-level multivariate model was fitted to analyze the determinants of satisfaction. We found eight satisfaction factors, with acceptable to good level of loadings and good reliability. More than 95% of variation in patient satisfaction scores was attributable to patient-level variation, with less than 5% attributable to hospital-level variation. The hierarchical models explain 5 to 17% of variation at the patient level and up to 52% of variation between hospitals. Individual patient characteristics had the strongest association with all dimensions of satisfaction. Few organizational performance indicators are associated with patient satisfaction and significant determinants differ according to the satisfaction dimension. The research findings highlight the importance of adjusting for both patient-level and organization-level characteristics when evaluating patient satisfaction. Better understanding and measurement of organization-level activities and processes associated with patient satisfaction could contribute to improved satisfaction ratings and care quality.

Parametric synthesis of a robust controller on a base of mathematical programming method

NASA Astrophysics Data System (ADS)

Khozhaev, I. V.; Gayvoronskiy, S. A.; Ezangina, T. A.

2018-05-01

Considered paper is dedicated to deriving sufficient conditions, linking root indices of robust control quality with coefficients of interval characteristic polynomial, on the base of mathematical programming method. On the base of these conditions, a method of PI- and PID-controllers, providing aperiodic transient process with acceptable stability degree and, subsequently, acceptable setting time, synthesis was developed. The method was applied to a problem of synthesizing a controller for a depth control system of an unmanned underwater vehicle.

Total 25-Hydroxyvitamin D Determination by an Entry Level Triple Quadrupole Instrument: Comparison between Two Commercial Kits

PubMed Central

Cocci, Andrea; Zuppi, Cecilia; Persichilli, Silvia

2013-01-01

Objective. 25-hydroxyvitamin D2/D3 (25-OHD2/D3) determination is a reliable biomarker for vitamin D status. Liquid chromatography-tandem mass spectrometry was recently proposed as a reference method for vitamin D status evaluation. The aim of this work is to compare two commercial kits (Chromsystems and PerkinElmer) for 25-OHD2/D3 determination by our entry level LC-MS/MS. Design and Methods. Chromsystems kit adds an online trap column to an HPLC column and provides atmospheric pressure chemical ionization, isotopically labeled internal standard, and 4 calibrator points. PerkinElmer kit uses a solvent extraction and protein precipitation method. This kit can be used with or without derivatization with, respectively, electrospray and atmospheric pressure chemical ionization. For each analyte, there are isotopically labeled internal standards and 7 deuterated calibrator points. Results. Performance characteristics are acceptable for both methods. Mean bias between methods calculated on 70 samples was 1.9 ng/mL. Linear regression analysis gave an R 2 of 0.94. 25-OHD2 is detectable only with PerkinElmer kit in derivatized assay option. Conclusion. Both methods are suitable for routine. Chromsystems kit minimizes manual sample preparation, requiring only protein precipitation, but, with our system, 25-OHD2 is not detectable. PerkinElmer kit without derivatization does not guarantee acceptable performance with our LC-MS/MS system, as sample is not purified online. Derivatization provides sufficient sensitivity for 25-OHD2 detection. PMID:23555079

Acceptability of picture archiving and communication system (PACS) among hospital healthcare personnel based on a unified theory of acceptance and use of technology.

PubMed

Ahmadi, Maryam; Mehrabi, Nahid; Sheikhtaheri, Abbas; Sadeghi, Mojtaba

2017-09-01

The picture archiving and communication system (PACS) is a healthcare system technology which manages medical images and integrates equipment through a network. There are some theories about the use and acceptance of technology by people to describe the behavior and attitudes of end users towards information technologies. We investigated the influential factors on users' acceptance of PACS in the military hospitals of Tehran. In this applied analytical and cross-sectional study, 151 healthcare employees of military hospitals who had experience in using the PACS system were investigated. Participants were selected by census. The following variables were considered: performance expectancy, efforts expectancy, social influence, facilitating conditions and behavioral intention. Data were gathered using a questionnaire. Its validity and reliability were approved by a panel of experts and was piloted with 30 hospital healthcare staff (Cronbach's alpha =0.91). Spearman correlation coefficient and multiple linear regression analysis were used in analyzing the data. Expected performance, efforts expectancy, social impact and facilitating conditions had a significant relationship with behavioral intention. The multiple regression analysis indicated that only performance expectancy can predict the user's behavioral intentions to use PACS technology. Performance and effort expectancies are quite influential in accepting the use of PACS in hospitals. All healthcare personnel should become aware that using such technology is necessary in a hospital. Knowing the influencing factors that affect the acceptance of using new technology can help in improving its use, especially in a healthcare system. This can improve the offered healthcare services' quality.

Time-resolved 3D MR velocity mapping at 3T: improved navigator-gated assessment of vascular anatomy and blood flow.

PubMed

Markl, Michael; Harloff, Andreas; Bley, Thorsten A; Zaitsev, Maxim; Jung, Bernd; Weigang, Ernst; Langer, Mathias; Hennig, Jürgen; Frydrychowicz, Alex

2007-04-01

To evaluate an improved image acquisition and data-processing strategy for assessing aortic vascular geometry and 3D blood flow at 3T. In a study with five normal volunteers and seven patients with known aortic pathology, prospectively ECG-gated cine three-dimensional (3D) MR velocity mapping with improved navigator gating, real-time adaptive k-space ordering and dynamic adjustment of the navigator acceptance criteria was performed. In addition to morphological information and three-directional blood flow velocities, phase-contrast (PC)-MRA images were derived from the same data set, which permitted 3D isosurface rendering of vascular boundaries in combination with visualization of blood-flow patterns. Analysis of navigator performance and image quality revealed improved scan efficiencies of 63.6%+/-10.5% and temporal resolution (<50 msec) compared to previous implementations. Semiquantitative evaluation of image quality by three independent observers demonstrated excellent general image appearance with moderate blurring and minor ghosting artifacts. Results from volunteer and patient examinations illustrate the potential of the improved image acquisition and data-processing strategy for identifying normal and pathological blood-flow characteristics. Navigator-gated time-resolved 3D MR velocity mapping at 3T in combination with advanced data processing is a powerful tool for performing detailed assessments of global and local blood-flow characteristics in the aorta to describe or exclude vascular alterations. Copyright (c) 2007 Wiley-Liss, Inc.

The Characteristics of Older People Who Engage in Community Music Making, Their Reasons for Participation and the Barriers They Face

ERIC Educational Resources Information Center

Hallam, Susan; Creech, Andrea; Varvarigou, Maria; McQueen, Hilary

2012-01-01

There is now an accepted need for initiatives that support older people's health and well-being. There is increasing evidence that active engagement with music has the potential to contribute to this. This research aimed to explore the characteristics of older people who participated in active music making with a view to identifying the groups…

40 CFR 30.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... characteristics or minimum acceptable standards. (iv) The specific features of “brand name or equal” descriptions..., specifies a “brand name” product. (4) The proposed award over the small purchase threshold is to be awarded...

22 CFR 145.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... characteristics or minimum acceptable standards. (iv) The specific features of “brand name or equal” descriptions... “brand name” product. (4) The proposed award over the small purchase limitation is to be awarded to other...

[Acceptance of preventive home visits among frail elderly persons : Participants an non-participants in a Follow-up after 2 and 4 years within the LUCAS longitudinal study].

PubMed

Pröfener, F; Anders, J; Dapp, U; Minder, C E; Golgert, S; von Renteln-Kruse, W

2016-10-01

The objective of preventive home visits (PHV) is to support independent living of elderly people. The target group is a matter of discussion and acceptance so far seems to have been low. The target group favored in studies were persons with functional impairments living independently; therefore, acceptance of this offer by frail persons and characteristics of participants and non-participants were studied. All participants classified as frail in the longitudinal urban cohort ageing study (LUCAS; BMBF Fkz 01ET0708-13/01, ET1002A-D/01EL1407) were randomized (RCT) in 2007/2008 into an intervention group (174 persons) and a control group (379 persons). Participants in the intervention group were offered the option of a PHV. Sociodemographic and health-related characteristics were compared between the participants with a PHV, non-participants and controls at baseline and after 2 and 4 years. Non-participants who refused the offer of the PHV were asked about their reasons. There were 64 persons (36.8 %) in the intervention group classified as frail who accepted the offer of a PHV. Of these, significantly more lived alone, tended to be female with a higher educational level and with less need of care. After 2 years significantly more persons in the group without PHV had died and after 4 years more participants with PHV reported a depressive mood. There were no other significant differences between the groups. Half of the reasons not to accept the PHV that were reported by the non-participants were because of health-related or psychological problems and one third because of lack of interest or need for PHV. The offer of PHV to frail elderly persons with an unlimited age was associated with a relatively high acceptance. The high number of refusals by non-participants with functional impairments is remarkable and needs further investigation.

An ambient assisted living approach in designing domiciliary services combined with innovative technologies for patients with Alzheimer's disease: a case study.

PubMed

Cavallo, Filippo; Aquilano, Michela; Arvati, Marco

2015-02-01

Alzheimer's disease (AD) is one of the most disabling diseases to affect large numbers of elderly people worldwide. Because of the characteristics of this disease, patients with AD require daily assistance from service providers both in nursing homes and at home. Domiciliary assistance has been demonstrated to be cost effective and efficient in the first phase of the disease, helping to slow down the course of the illness, improve the quality of life and care, and extend independence for patients and caregivers. In this context, the aim of this work is to demonstrate the technical effectiveness and acceptability of an innovative domiciliary smart sensor system for providing domiciliary assistance to patients with AD which has been developed with an Ambient Assisted Living (AAL) approach. The design, development, testing, and evaluation of the innovative technological solution were performed by a multidisciplinary team. In all, 15 sociomedical operators and 14 patients with AD were directly involved in defining the end-users' needs and requirements, identifying design principles with acceptability and usability features and evaluating the technological solutions before and after the real experimentation. A modular technological system was produced to help caregivers continuously monitor the health status, safety, and daily activities of patients with AD. During the experimentation, the acceptability, utility, usability, and efficacy of this system were evaluated as quite positive. The experience described in this article demonstrated that AAL technologies are feasible and effective nowadays and can be actively used in assisting patients with AD in their homes. The extensive involvement of caregivers in the experimentation allowed to assess that there is, through the use of the technological system, a proven improvement in care performance and efficiency of care provision by both formal and informal caregivers and consequently an increase in the quality of life of patients, their relatives, and their caregivers. © The Author(s) 2014.

Discordance between bioelectrical impedance vector analysis and the new ESPEN definition of malnutrition for the diagnosis of hospital malnutrition.

PubMed

Dehesa-López, Edgar; Martínez-Felix, Jesús Israel; Ruiz-Ramos, Arturo; Atilano-Carsi, Ximena

2017-04-01

No universally accepted diagnostic criteria for malnutrition are available to date. The aim was to assess the concordance for the diagnosis of hospital malnutrition between the bioelectrical impedance vector analysis (BIVA) and the new definition of malnutrition proposed by the European Society for Clinical Nutrition and Metabolism (ESPEN). A total of 140 adult hospitalized patients were included. The malnutrition risk was assessed by the Nutritional Risk Screening. The ESPEN malnutrition criteria (body mass index (BMI) <18.5 kg/m 2 , weight loss (WL) + low BMI, and WL + low fat free mass index (FFMI) were applied to each patient. The bioelectrical impedance of each patient was measured, and malnutrition was diagnosed using the BIVA method. Diagnostic concordance between the BIVA and the new ESPEN definition was assessed with the Kappa coefficient. The malnutrition prevalence was higher with the BIVA vs ESPEN definition (22.1% vs 13.6%) in the global population and was similar (12.8% vs 12.1%) in the population at risk of malnutrition. The diagnostic performance of the BIVA was acceptable, with higher sensitivity in patients with fluid overload (FO) and more specificity in euvolemic patients. Diagnostic concordance between the BIVA and the ESPEN definition was poor for the global population (kappa = 0.56) and the population at risk of malnutrition (kappa = 0.67) but was acceptable in patients with FO (kappa = 0.78). However, the discordant BIVA+/ESPEN- patients classified as false positives for BIVA showed clinical and body composition data (low FFMI, low phase angle) consistent with malnutrition. According to the clinical and bioelectrical characteristics of the discordant BIVA+/ESPEN- patients, the BIVA could perform better that the new ESPEN definition for the diagnosis of hospital malnutrition, which should be confirmed with other studies. Copyright © 2017 European Society for Clinical Nutrition and Metabolism. Published by Elsevier Ltd. All rights reserved.

Effect of wheat bran and dried carrot pomace addition on quality characteristics of chicken sausage

PubMed Central

2018-01-01

Objective Effect of addition of wheat bran (WB) and dried carrot pomace (DCP) on sensory, textural, colour, physico-chemical and nutritional characteristics of chicken sausage were evaluated. Methods WB and DCP were used as a source of dietary fibre at 3%, 6%, and 9% level individually. Different quality attributes of sausages were estimated. One product from each source with very good sensory acceptability was selected to analyze dietary fibre content and shelf life under refrigerated storage. Results Sensory acceptability of 3% fibre enriched sausage was comparable with control and a further increase in fibre level resulted in a decrease in sensory acceptability. Fibre enriched sausages were significantly harder and less cohesive than control sausage. Significant increase in gumminess and chewiness was observed at 6% level in WB treated sausages and 9% level in DCP treated sausages. Moisture content decreased significantly in all treated sausages, protein content decreased significantly in DCP-2 and DCP-3 sausages while fat content decreased in all WB and DCP-3 treated sausages in comparison to control. The fibre enriched sausage had significantly higher dietary fibre and lower cholesterol content. Cooking yield and emulsion stability increased in treated sausages and a significant difference was noticed at 6% level in both types of sausages. pH of WB treated sausages was significantly higher and DCP treated sausage significantly lower in comparison to control. Conclusion The results of present study indicate that fibre enriched chicken sausage with moderate acceptability can be developed by incorporating WB and DCP each up to 9% level. Chicken sausage with very good acceptability, higher dietary fibre content and storability up to 15 days at refrigerated temperature can be developed by incorporating WB and DCP at 6% level each. PMID:28823131

Observation of the thermal influenced quantum behaviour of water near a solid interface.

PubMed

Yoon, Hongkee; Yoon, Byoung Jip

2018-05-03

Water is essential for life. However, the structure and properties of water are still not well understood. It has been introduced that anomalies are in vicinal water near solid interfaces. We performed capillary flow experiments on water with a silica colloid sample using a high-performance liquid chromatography (HPLC) system by accurately varying the temperature and analysed the peak shape rigorously. We obtained a novel anomalous temperature spectrum from the peak-shape analysis. Here we report the observed distinct specific anomalous temperature (SAT) behaviour in vicinal water at silica interface. The anomaly appeared in the viscous force that was derived from a relationship between the shape of the HPLC peak and the velocity profile for the capillary flow. The observations were highly reproducible, and we conclude that the SAT is related to the quantum mechanical behaviour of water, in agreement of the characteristic acceptance of thermal displacement according to the Franck-Condon principle. We performed the same experiments using heavy water and water mixed with a small amount of methanol, and the results support the quantum phenomenological origin.

An in situ generated carbon as integrated conductive additive for hierarchical negative plate of lead-acid battery

NASA Astrophysics Data System (ADS)

Saravanan, M.; Ganesan, M.; Ambalavanan, S.

2014-04-01

In this work, we report an in situ generated carbon from sugar as additive in the Negative Active Mass (NAM) which enhances the charge-discharge characteristics of the lead-acid cells. In situ formed sugar derived carbon (SDC) with leady oxide (LO) provides a conductive network and excellent protection against NAM irreversible lead sulfation. The effect of SDC and carbon black (CB) added negative plates are characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), galvanostatic charge-discharge, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. The results show that subtle changes in the addition of carbon to NAM led to subsequent changes on the performance during partial-state-of-charge (PSoC) operations in lead-acid cells. Furthermore, SDC added cells exhibit remarkable improvement in the rate capability, active material utilization, cycle performance and charge acceptance compared to that of the conventional CB added cells. The impact of SDC with LO at various synthesis conditions on the electrochemical performance of the negative plate is studied systematically.

The role of rapid antigen testing for influenza in the era of molecular diagnostics.

PubMed

Dale, Suzanne E

2010-08-01

Rapid antigen testing for influenza has been both maligned and revered since its conception. Microbiologists have long lamented the lack of sensitivity of commercial rapid influenza detection tests (RIDTs), whereas many clinicians have eschewed their utility by emphasizing the value of definitely diagnosing influenza at the patient's bedside. RIDTs, although quick and easy to perform, are widely accepted as being less sensitive than traditional culture techniques and newer molecular methods, including reverse-transcription polymerase chain reaction (RT-PCR). Moreover, the performance characteristics of RIDTs vary widely, and their applications as clinical diagnostic tools are not well understood. In contrast, traditional techniques are time consuming and require significant expertise to perform. Often, the delay in diagnosing influenza through these methods has little impact on patient care. The benefits of achieving a diagnosis of influenza at the point of care are numerous and include increased access to appropriate antivirals, appropriate patient cohorting for infection control purposes, and better resource utilization. Therefore, it behooves the microbiology community to communicate these issues to clinicians and to work to improve the sensitivity of RIDTs.

Implementation of several mathematical algorithms to breast tissue density classification

NASA Astrophysics Data System (ADS)

Quintana, C.; Redondo, M.; Tirao, G.

2014-02-01

The accuracy of mammographic abnormality detection methods is strongly dependent on breast tissue characteristics, where a dense breast tissue can hide lesions causing cancer to be detected at later stages. In addition, breast tissue density is widely accepted to be an important risk indicator for the development of breast cancer. This paper presents the implementation and the performance of different mathematical algorithms designed to standardize the categorization of mammographic images, according to the American College of Radiology classifications. These mathematical techniques are based on intrinsic properties calculations and on comparison with an ideal homogeneous image (joint entropy, mutual information, normalized cross correlation and index Q) as categorization parameters. The algorithms evaluation was performed on 100 cases of the mammographic data sets provided by the Ministerio de Salud de la Provincia de Córdoba, Argentina—Programa de Prevención del Cáncer de Mama (Department of Public Health, Córdoba, Argentina, Breast Cancer Prevention Program). The obtained breast classifications were compared with the expert medical diagnostics, showing a good performance. The implemented algorithms revealed a high potentiality to classify breasts into tissue density categories.

The Acceptability of Food and Food Service at Fitzsimons Army Medical Center Under Military and Contract Operation

DTIC Science & Technology

1985-09-01

service quality in the civilian sector. It was determined that acceptability by the patients eating in their rooms and by patients and personnel...performance significantly higher than the military food operation. CONCLUSION The results of the acceptability surveys of food and food service quality under

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2013 CFR

2013-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2013-10-01 2013-10-01 false Pre-revenue service acceptance testing plan. 232...

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2012 CFR

2012-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2012-10-01 2012-10-01 false Pre-revenue service acceptance testing plan. 232...

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2014 CFR

2014-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2014-10-01 2014-10-01 false Pre-revenue service acceptance testing plan. 232...

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2011 CFR

2011-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2011-10-01 2011-10-01 false Pre-revenue service acceptance testing plan. 232...

A qualitative study on the acceptability and preference of three types of long-lasting insecticide-treated bed nets in Solomon Islands: implications for malaria elimination

PubMed Central

Atkinson, Jo-An; Bobogare, Albino; Fitzgerald, Lisa; Boaz, Leonard; Appleyard, Bridget; Toaliu, Hilson; Vallely, Andrew

2009-01-01

Background In March 2008, the Solomon Islands and Vanuatu governments raised the goal of their National Malaria Programmes from control to elimination. Vector control measures, such as indoor residual spraying (IRS) and long-lasting insecticidal bed nets (LLINs) are key integral components of this programme. Compliance with these interventions is dependent on their acceptability and on the socio-cultural context of the local population. These factors need to be investigated locally prior to programme implementation. Method Twelve focus group discussions (FGDs) were carried out in Malaita and Temotu Provinces, Solomon Islands in 2008. These discussions explored user perceptions of acceptability and preference for three brands of long-lasting insecticide-treated bed nets (LLINs) and identified a number of barriers to their proper and consistent use. Results Mosquito nuisance and perceived threat of malaria were the main determinants of bed net use. Knowledge of malaria and the means to prevent it were not sufficient to guarantee compliance with LLIN use. Factors such as climate, work and evening social activities impact on the use of bed nets, particularly in men. LLIN acceptability plays a varying role in compliance with their use in villages involved in this study. Participants in areas of reported high and year round mosquito nuisance and perceived threat of malaria reported LLIN use regardless of any reported unfavourable characteristics. Those in areas of low or seasonal mosquito nuisance were more likely to describe the unfavourable characteristics of LLINs as reasons for their intermittent or non-compliance. The main criterion for LLIN brand acceptability was effectiveness in preventing mosquito bites and malaria. Discussions highlighted considerable confusion around LLIN care and washing which may be impacting on their effectiveness and reducing their acceptability in Solomon Islands. Conclusion Providing LLINs that are acceptable will be more important for improving compliance in areas of low or seasonal mosquito nuisance and malaria transmission. The implications of these findings on malaria elimination in Solomon Islands are discussed. PMID:19497127

A three-year clinical evaluation of two-bottle versus one-bottle dentin adhesives.

PubMed

Aw, Tar C; Lepe, Xavier; Johnson, Glen H; Mancl, Lloyd A

2005-03-01

The authors conducted an in vivo investigation to compare the clinical performance of two commercial one-bottle adhesives and a two-bottle adhesive for restoration of noncarious cervical lesions (NCCLs). The patient pool consisted of 57 patients and 171 teeth (three teeth per patient), with one NCCL per tooth. Each patient received three resin-based composite restorations, each with a different adhesive: one tooth with a two-bottle, water-based adhesive as the control; another tooth with a one-bottle, ethanol-based adhesive; and a third tooth with a one-bottle, solvent-free adhesive. The authors assessed restorations in terms of retention, marginal integrity, margin discoloration and air sensitivity at baseline, six months, one year, two years and three years after initial placement. The retention rates at 36 months were 88 percent for the first adhesive, 81 percent for the second adhesive and 90 percent for the third adhesive. No statistically significant differences in retention rates could be shown, with 86 percent of restorations retained overall. Measures of marginal integrity, marginal discoloration and sensitivity also had no statistically significant differences between the three adhesives (P > .05). All three adhesives performed with acceptable outcomes after a 36-month period, with small differences between the one- and two-bottle systems and between the various solvents. Retention rate was moderately high and air sensitivity was markedly reduced; however, superficial marginal discoloration and marginal degradation was notable. Certain lesion, tooth and patient characteristics may predispose restorations to retention failure. The type of solvent may not be a major factor in retention of Class V restorations in NCCLs. Both single-bottle adhesives and conventional two-bottle adhesives performed acceptably.

Comparison of DOE and Army Advisory Boards: Application of a Conceptual Framework for Evaluating Public Participation in Environmental Risk Decision Making

DOE Office of Scientific and Technical Information (OSTI.GOV)

Branch, Kristi M.; Bradbury, Judith A.

This article is part of a growing body of literature evaluating public participation approaches and implementation efforts. It compares the characteristics and performance of citizen advisory boards established by the U.S. Department of Energy's Environmental Restoration and Waste Management Program (DOE/EM) and by the U.S. Department of Defense's Army (DoD/Army) as a major part of the public participation programs that were undertaken to help the agencies plan and implement the cleanup of their contaminated installations. We first present the elements of the Acceptability Diamond, an evaluative framework developed by the authors through extensive fieldwork on public-federal agency interactions that identifymore » five objectives of agency/public interactions and public participation programs, and link them to existing literature. We then use the Acceptability Diamond as a basis for comparing the performance of the DOE/EM and DoD/Army advisory boards. In the early 1990s, both DOE and DoD participated in the Federal Facilities Environmental Restoration Dialogue Committee (known as the FFER Dialogue Committee) and were influenced by the Committee's recommendations on public participation. However, the Site Specific Advisory Boards (SSABs) subsequently established by DOE/EM and the Restoration Advisory Boards (RABs) subsequently established by DoD and the Army were governed by significantly different policies and management. We describe some of these key differences and compare the performance of the SSABs and RABs. The article draws on a series of research studies conducted by the authors on the DOE/EM public participation program from its inception in the early 1990s through its transition to accelerated cleanup in 2002 and also on a recently completed study of seven Army RABs.« less

Screening older cancer patients for a Comprehensive Geriatric Assessment: A comparison of three instruments

PubMed Central

Owusu, Cynthia; Koroukian, Siran M.; Schluchter, Mark; Bakaki, Paul; Berger, Nathan A.

2011-01-01

Background The Vulnerable Elders Survey (VES-13) has been validated for screening older cancer patients for a Comprehensive Geriatric Assessment (CGA). To identify a widely acceptable approach that encourages oncologists to screen older cancer patients for a CGA, we examined the Eastern Cooperative Oncology Group Performance Status (ECOG-PS) and Karnofsky Index of Performance Status (KPS) scales’ ability to identify abnormalities on a CGA and compared the performance of the two instruments with the VES-13. Methods We enrolled 117 participants, ≥65 years with stage I–IV cancer into this cross-sectional study. Our primary outcome variable was ≥two abnormalities on the CGA, (Yes or No). We employed receiver operating characteristic curve analysis to compare the discriminatory abilities of the three instruments to identify ≥two abnormalities on the CGA. Results Of the 117 participants, 43% had ≥two abnormalities on the CGA. The VES-13 was predictive of ≥two abnormalities on the CGA, area under the curve (AUC)=0.85 [(95% CI: 0.78–0.92); sensitivity=88%, specificity=69%, at cut-off ≥3]. The ECOG-PS and KPS showed similar discriminatory powers, AUC=0.88 [(95% CI: 0.83–0.94); sensitivity=94%, specificity=55%, at cut-off ≥1]; and AUC=0.90 [(95% CI: 0.84–0.96); sensitivity=78%, specificity=91%, at cut-off ≤80%], respectively. Conclusion The ECOG-PS and KPS were equivalent to the VES-13 in identifying older cancer patients with at least two abnormalities on the CGA. Given that oncologists are already conversant with the KPS and ECOG-PS, these two instruments offer medical oncologists a widely acceptable approach for screening older patients for a CGA. PMID:21927633

Acceptability and adherence: findings from a Phase II study of a candidate vaginal microbicide, 'Praneem polyherbal tablet', in Pune, India.

PubMed

Joglekar, N S; Joshi, S N; Deshpande, S S; Parkhe, A N; Katti, U R; Mehendale, S M

2010-06-01

Acceptability and adherence in clinical trials of microbicides may possibly predict their acceptance by the community. In this study, we investigated the acceptability and adherence of Praneem polyherbal tablet, a candidate microbicide, among 100 HIV-uninfected participants of a Phase II randomised, double-blind, placebo-controlled trial in Pune, India, conducted between June 2004 and February 2006 involving 6 months of coitally-dependent product use. The relationship between five acceptability domains and adherence to product use during the study period was explored. Acceptability and adherence were assessed among 95 study participants completing all study follow-ups. One hundred percent adherence (product use during each sex act for the study period) was reported by 67 participants (70.5%). The majority of participants reported acceptability towards all product characteristics. Product odour was reported to be a concern both in the placebo and Praneem arms. Participants from the Praneem arm [adjusted odds ratio (AOR)=3.8; 95% CI 1.4-10.8] and participants reporting lower acceptability for experience of product use during the sex act (AOR=4.2; 95% CI 1.0-17.3) were more likely to have partial adherence. In conclusion, the study product was acceptable to the majority of participants. However, barriers to adherence attributable to undesirable sexual experiences need to be addressed. 2010 Royal Society of Tropical Medicine and Hygiene. Published by Elsevier Ltd. All rights reserved.

Introduction of laparoscopic low anterior resection for rectal cancer early during residency: a single institutional study on short-term outcomes.

PubMed

Ogiso, Satoshi; Yamaguchi, Takashi; Hata, Hiroaki; Kuroyanagi, Hiroya; Sakai, Yoshiharu

2010-11-01

Laparoscopic surgery for rectal cancer is unpopular because it is technically challenging. Suitable training systems have not been widely studied or established despite the steep learning curve for this procedure. We developed a systematic training program that enables resident surgeons to perform laparoscopic low anterior resection (LLAR) for rectal cancer and evaluated the safety and feasibility of this training program. We analyzed prospectively gathered data on all LLARs for rectal cancer performed at a single center over a 7-year period. Patients were assessed for demographic characteristics, tumor characteristics, operative procedure, operative time, blood loss, conversion to open surgery, complications, time to bowel recovery, distal margin, and number of lymph nodes harvested. We compared the early surgical, oncological, and functional outcomes of LLARs performed by expert surgeons with those of LLARs performed by resident surgeons for both intraperitoneal and extraperitoneal rectal cancer. All analyses were performed on an intention-to-treat basis. A total of 137 patients met the inclusion criteria for this study. Of the 75 LLARs for intraperitoneal rectal cancer, 40 were performed by expert surgeons (I-E group) and 35 by resident surgeons (I-R group). Of the 62 LLARs for extraperitoneal rectal cancer, 51 were performed by expert surgeons (E-E group) and 11 by resident surgeons (E-R group). The operative time was longer in the E-R group than in the E-E group. The time to resumption of diet was longer in the I-E group than in the I-R group. The other early outcomes, including blood loss, anastomotic leakage, conversion to open surgery, and number of lymph nodes harvested, were similar in the I-E and I-R groups and in the E-E and E-R groups. Our systematic training program on LLAR for rectal cancer enables resident surgeons to perform this procedure safely early during residency, with acceptable short-term outcomes.

Physical and sensory characteristics of cookies prepared with flaxseed flour.

PubMed

Khouryieh, Hanna; Aramouni, Fadi

2012-08-30

Flaxseed has many health benefits and is considered a functional food ingredient. Flaxseed flour (0-18%) was used to partially replace wheat flour in cookies and its effects on the physical and sensory characteristics of the cookies were investigated. A correlation analysis was conducted between the instrumental and sensory data. The cookie dough stickiness significantly (P < 0.05) decreased in relation to higher percentages of flaxseed flour. The 18% flaxseed cookies had the firmest texture, darkest color and lowest water activity. The 18% flaxseed cookies had the greatest spread ratio. However, this resulted in cookies of unacceptable quality properties. In consumer acceptance tests, cookies made with 6% and 12% flaxseed flour had the highest rating among all sensory attributes, while the 18% flaxseed cookies had the lowest sensory scores. The flavor attribute was most highly correlated with the overall acceptability (r = 0.90). Results indicated that flaxseed flour can be incorporated in cookies as a partial replacement up to 12% of wheat flour without negatively affecting the physical and sensory quality. The correlation results suggest that the flaxseed flavor attributes best predict consumer preference for overall acceptability, though texture and color attributes also contribute. Copyright © 2012 Society of Chemical Industry.

Technology Adoption: an Interaction Perspective

NASA Astrophysics Data System (ADS)

Sitorus, Hotna M.; Govindaraju, Rajesri; Wiratmadja, I. I.; Sudirman, Iman

2016-02-01

The success of a new technology depends on how well it is accepted by its intended users. Many technologies face the problem of low adoption rate, despite the benefits. An understanding of what makes people accept or reject a new technology can help speed up the adoption rate. This paper presents a framework for technology adoption based on an interactive perspective, resulting from a literature study on technology adoption. In studying technology adoption, it is necessary to consider the interactions among elements involved in the system, for these interactions may generate new characteristics or new relationships. The interactions among elements in a system adoption have not received sufficient consideration in previous studies of technology adoption. Based on the proposed interaction perspective, technology adoption is elaborated by examining interactions among the individual (i.e. the user or prospective user), the technology, the task and the environment. The framework is formulated by adopting several theories, including Perceived Characteristics of Innovating, Diffusion of Innovation Theory, Technology Acceptance Model, Task-Technology Fit and usability theory. The proposed framework is illustrated in the context of mobile banking adoption. It is aimed to offer a better understanding of determinants of technology adoption in various contexts, including technology in manufacturing systems.