Science.gov

Sample records for acceptance criteria material

  1. Development on inelastic analysis acceptance criteria for radioactive material transportation packages

    SciTech Connect

    Ammerman, D.J.; Ludwigsen, J.S.

    1995-12-31

    The response of radioactive material transportation packages to mechanical accident loadings can be more accurately characterized by non-linear dynamic analysis than by the ``Equivalent dynamic`` static elastic analysis typically used in the design of these packages. This more accurate characterization of the response can lead to improved package safety and design efficiency. For non-linear dynamic analysis to become the preferred method of package design analysis, an acceptance criterion must be established that achieves an equivalent level of safety as the currently used criterion defined in NRC Regulatory Guide 7.6 (NRC 1978). Sandia National Laboratories has been conducting a study of possible acceptance criteria to meet this requirement. In this paper non-linear dynamic analysis acceptance criteria based on stress, strain, and strain-energy-density will be discussed. An example package design will be compared for each of the design criteria, including the approach of NRC Regulatory Guide 7.6.

  2. Prototype Training Materials for Acceptance Criteria of Maintenance ASAP Events Occurring Within Social Context

    NASA Technical Reports Server (NTRS)

    Taylor, J. C.

    2004-01-01

    The aviation maintenance community is at a crossroads with respect to implementing the Aviation Safety Action Program (ASAP). While there is considerable interest, several key issues have emerged that cast doubt on how to assure a successful implementation, including buy-in from all levels of the company and training for key participants. There are two objectives for the present report. The first is to provide an examination of limits (or more properly, examples) of the degree of acceptability of more problematic events for risk-based decisions within the current ASAP guidelines. The second objective is to apply these limits of community standards to a set of further refined ASAP training scenarios.

  3. Nevada Test Site Waste Acceptance Criteria (NTSWAC)

    SciTech Connect

    NNSA /NSO Waste Management Project

    2008-06-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal.

  4. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA

    SciTech Connect

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION, NEVADA SITE OFFICE

    2005-07-01

    This document establishes the U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal. Mixed waste generated within the State of Nevada by NNSA/NSO activities is accepted for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Site for storage or disposal.

  5. Hanford Site Solid Waste Acceptance Criteria

    SciTech Connect

    Not Available

    1993-11-17

    This manual defines the Hanford Site radioactive, hazardous, and sanitary solid waste acceptance criteria. Criteria in the manual represent a guide for meeting state and federal regulations; DOE Orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to acceptance of radioactive and hazardous solid waste at the Hanford Site. It is not the intent of this manual to be all inclusive of the regulations; rather, it is intended that the manual provide the waste generator with only the requirements that waste must meet in order to be accepted at Hanford Site TSD facilities.

  6. Hanford Site solid waste acceptance criteria

    SciTech Connect

    Ellefson, M.D.

    1998-07-01

    Order 5820.2A requires that each treatment, storage, and/or disposal facility (referred to in this document as TSD unit) that manages low-level or transuranic waste (including mixed waste and TSCA PCB waste) maintain waste acceptance criteria. These criteria must address the various requirements to operate the TSD unit in compliance with applicable safety and environmental requirements. This document sets forth the baseline criteria for acceptance of radioactive waste at TSD units operated by WMH. The criteria for each TSD unit have been established to ensure that waste accepted can be managed in a manner that is within the operating requirements of the unit, including environmental regulations, DOE Orders, permits, technical safety requirements, waste analysis plans, performance assessments, and other applicable requirements. Acceptance criteria apply to the following TSD units: the Low-Level Burial Grounds (LLBG) including both the nonregulated portions of the LLBG and trenches 31 and 34 of the 218-W-5 Burial Ground for mixed waste disposal; Central Waste Complex (CWC); Waste Receiving and Processing Facility (WRAP); and T Plant Complex. Waste from all generators, both from the Hanford Site and from offsite facilities, must comply with these criteria. Exceptions can be granted as provided in Section 1.6. Specific waste streams could have additional requirements based on the 1901 identified TSD pathway. These requirements are communicated in the Waste Specification Records (WSRds). The Hanford Site manages nonradioactive waste through direct shipments to offsite contractors. The waste acceptance requirements of the offsite TSD facility must be met for these nonradioactive wastes. This document does not address the acceptance requirements of these offsite facilities.

  7. Nevada Test Site Waste Acceptance Criteria

    SciTech Connect

    U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office

    2005-10-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  8. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect

    NSTec Environmental Management

    2010-09-03

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  9. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect

    NSTec Environmental Management

    2011-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  10. Acceptance Criteria Framework for Autonomous Biological Detectors

    SciTech Connect

    Dzenitis, J M

    2006-12-12

    The purpose of this study was to examine a set of user acceptance criteria for autonomous biological detection systems for application in high-traffic, public facilities. The test case for the acceptance criteria was the Autonomous Pathogen Detection System (APDS) operating in high-traffic facilities in New York City (NYC). However, the acceptance criteria were designed to be generally applicable to other biological detection systems in other locations. For such detection systems, ''users'' will include local authorities (e.g., facility operators, public health officials, and law enforcement personnel) and national authorities [including personnel from the Department of Homeland Security (DHS), the BioWatch Program, the Centers for Disease Control and Prevention (CDC), and the Federal Bureau of Investigation (FBI)]. The panel members brought expertise from a broad range of backgrounds to complete this picture. The goals of this document are: (1) To serve as informal guidance for users in considering the benefits and costs of these systems. (2) To serve as informal guidance for developers in understanding the needs of users. In follow-up work, this framework will be used to systematically document the APDS for appropriateness and readiness for use in NYC.

  11. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect

    none,

    2013-06-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: • DOE hazardous and non-hazardous non-radioactive classified waste • DOE low-level radioactive waste (LLW) • DOE mixed low-level waste (MLLW) • U.S. Department of Defense (DOD) classified waste The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  12. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect

    NSTec Environmental Management

    2012-02-28

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept DOE non-radioactive classified waste, DOE non-radioactive hazardous classified waste, DOE low-level radioactive waste (LLW), DOE mixed low-level waste (MLLW), and U.S. Department of Defense (DOD) classified waste for permanent disposal. Classified waste is the only waste accepted for disposal that may be non-radioactive and will be required to meet the waste acceptance criteria for radioactive waste as specified in this document. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project (WMP) at (702) 295-7063, and your call will be directed to the appropriate contact.

  13. STOL ride quality criteria - Passenger acceptance.

    NASA Technical Reports Server (NTRS)

    Jacobson, I. D.; Kuhlthau, A. R.

    1972-01-01

    The ability to mathematically model human reaction to variables involved in transportation systems offers a very desirable tool both for the prediction of passenger acceptance of proposed systems, and for establishing acceptance criteria for the system designer. As a first step in the development of a general model for STOL systems, a mathematical formulation is presented which accepts as inputs nine variables felt to be important in flight under STOL-type conditions and presents an index of human response as the output. The variables used are three linear motions, three angular motions, pressure, temperature and noise level. The results are used to establish specifications for stability augmentation systems to improve the ride quality of existing STOL aircraft.

  14. Development of quantitative risk acceptance criteria

    SciTech Connect

    Griesmeyer, J. M.; Okrent, D.

    1981-01-01

    Some of the major considerations for effective management of risk are discussed, with particular emphasis on risks due to nuclear power plant operations. Although there are impacts associated with the rest of the fuel cycle, they are not addressed here. Several previously published proposals for quantitative risk criteria are reviewed. They range from a simple acceptance criterion on individual risk of death to a quantitative risk management framework. The final section discussed some of the problems in the establishment of a framework for the quantitative management of risk.

  15. Steam generator tube integrity flaw acceptance criteria

    SciTech Connect

    Cochet, B.

    1997-02-01

    The author discusses the establishment of a flaw acceptance criteria with respect to flaws in steam generator tubing. The problem is complicated because different countries take different approaches to the problem. The objectives in general are grouped in three broad areas: to avoid the unscheduled shutdown of the reactor during normal operation; to avoid tube bursts; to avoid excessive leak rates in the event of an accidental overpressure event. For each degradation mechanism in the tubes it is necessary to know answers to an array of questions, including: how well does NDT testing perform against this problem; how rapidly does such degradation develop; how well is this degradation mechanism understood. Based on the above information it is then possible to come up with a policy to look at flaw acceptance. Part of this criteria is a schedule for the frequency of in-service inspection and also a policy for when to plug flawed tubes. The author goes into a broad discussion of each of these points in his paper.

  16. Waste acceptance criteria for closure generated waste

    SciTech Connect

    Not Available

    1992-05-01

    The PORTS Facility has been operating since 1954. The PORTS Facility is used to enrich uranium for nuclear navy applications and commercial nuclear reactors. The PORTS process uses molecular diffusion techniques to separate the U-235 isotope from the U-238 isotope. The PORTS Facility consists of a complex cascade of compressors and converters through which gaseous uranium hexafluoride feed is processed. The feed contains approximately 0.7 percent U-235 by weight while products contain from 4 to 97 percent U-235 by weight, depending on the final application. In general, the majority of the closure wastes generated at PORTS consists of personal protective equipment (PPE), rags, soils, decontamination solutions, and construction related debris. These hazardous wastes will be predominately characterized on the basis of process knowledge. PORTS assumes its conservative waste characterizations that are based on process knowledge are correct unless and until further investigation and/or analysis proves the constituents are not present or are present at concentrations below characteristic regulatory thresholds. Waste Acceptance Criteria for wastes generated by the closure of active and inactive RCRA facilities at PORTS has been developed. The criteria presented in this document govern the activities that are performed during the closure and subsequent generation of waste and relocation from the closure locations to the storage unit. These criteria are intended to ensure the proper handling, classification, processing, and storage of wastes in order to prevent hazardous waste release that may pose a threat to human health or the environment. Any wastes currently stored at each of the facilities that are to be closed will be transferred to the X-326 or X-7725 Storage Units. The waste transfers will be accomplished in accordance with the Container Transfer Plan.

  17. Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

    SciTech Connect

    Mertz, G.

    1999-12-16

    This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements.

  18. Nevada Test Site Waste Acceptance Criteria, December 2000

    SciTech Connect

    2000-12-01

    This document establishes the US Department of Energy, Nevada Operations Office waste acceptance criteria. The waste acceptance criteria provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive waste and mixed waste for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Sites for storage or disposal.

  19. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Acceptance criteria for new explosives. 173.57... § 173.57 Acceptance criteria for new explosives. (a) Unless otherwise excepted, an explosive substance... the Small-Scale Burning Test (Test Method 3(d)(i)), each as described in the Explosive Test Manual...

  20. Nevada Test Site Waste Acceptance Criteria

    SciTech Connect

    U.S. Department of Energy, Nevada Operations Office, Waste Acceptance Criteria

    1999-05-01

    This document provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the Nevada Test Site.

  1. IHE material qualification tests description and criteria

    SciTech Connect

    Slape, R J

    1984-06-01

    This report describes the qualification tests presently being used at Pantex Plant, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory that are required by the Department of Energy prior to the approval for an explosive as an Insensitive High Explosive (IHE) material. The acceptance criteria of each test for IHE qualification is also discussed. 5 references, 10 figures.

  2. Identifying Minimally Acceptable Interpretive Performance Criteria for Screening Mammography1

    PubMed Central

    Sickles, Edward A.; Monsees, Barbara S.; Bassett, Lawrence W.; Brenner, R. James; Feig, Stephen A.; Smith, Robert A.; Rosenberg, Robert D.; Bogart, T. Andrew; Browning, Sally; Barry, Jane W.; Kelly, Mary M.; Tran, Khai A.; Miglioretti, Diana L.

    2010-01-01

    Purpose: To develop criteria to identify thresholds for minimally acceptable physician performance in interpreting screening mammography studies and to profile the impact that implementing these criteria may have on the practice of radiology in the United States. Materials and Methods: In an institutional review board–approved, HIPAA-compliant study, an Angoff approach was used in two phases to set criteria for identifying minimally acceptable interpretive performance at screening mammography as measured by sensitivity, specificity, recall rate, positive predictive value (PPV) of recall (PPV1) and of biopsy recommendation (PPV2), and cancer detection rate. Performance measures were considered separately. In phase I, a group of 10 expert radiologists considered a hypothetical pool of 100 interpreting physicians and conveyed their cut points of minimally acceptable performance. The experts were informed that a physician’s performance falling outside the cut points would result in a recommendation to consider additional training. During each round of scoring, all expert radiologists’ cut points were summarized into a mean, median, mode, and range; these were presented back to the group. In phase II, normative data on performance were shown to illustrate the potential impact cut points would have on radiology practice. Rescoring was done until consensus among experts was achieved. Simulation methods were used to estimate the potential impact of performance that improved to acceptable levels if effective additional training was provided. Results: Final cut points to identify low performance were as follows: sensitivity less than 75%, specificity less than 88% or greater than 95%, recall rate less than 5% or greater than 12%, PPV1 less than 3% or greater than 8%, PPV2 less than 20% or greater than 40%, and cancer detection rate less than 2.5 per 1000 interpretations. The selected cut points for performance measures would likely result in 18%–28% of interpreting

  3. Nevada test site waste acceptance criteria

    SciTech Connect

    1996-09-01

    This document provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document.

  4. Acceptance criteria for risk in offshore construction projects

    SciTech Connect

    Rettedal, W.; Gudmestad, O.T.

    1995-12-31

    The Norwegian Petroleum Directorate (NPD) state in their Regulation for Risk Analysis that the Operator shall form the acceptance criteria for the risk analysis. This applies to both the construction and operating phases. The philosophy is that the risk should be kept as low as reasonable practicable (ALARP). This paper will discuss what form the criteria for an offshore construction project should have, what hazards the criteria should be measured against and how one should proceed to obtain acceptable risk levels. An application of the criteria for an offshore construction project will be discussed.

  5. Standard format and content acceptance criteria for the Material Control and Accounting (MC and A) Reform Amendment: 10 CFR Part 74, Subpart E. Revision 1

    SciTech Connect

    1995-04-01

    In 1987 the NRC revised the material control and accounting requirements for NRC licensees authorized to possess and use a formula quantity (i.e., 5 formula kilograms or more) of strategic special nuclear material. Those revisions issued as 10 CFR 74.51-59 require timely monitoring of in-process inventory and discrete items to detect anomalies potentially indicative of material losses. Timely detection and enhanced loss localization capabilities are beneficial to alarm resolution and also for material recovery in the event of an actual loss. NUREG-1280 was issued in 1987 to present criteria that could be used by applicants, licensees, and NRC license reviewers in the initial preparation and subsequent review of fundamental nuclear material control (FNMC) plans submitted in response to the Reform Amendment. This document is also intended for both licensees and license reviewers with respect to FNMC plan revisions. General performance objectives, system capabilities, process monitoring, item monitoring, alarm resolution, quality assurance, and accounting are addressed. This revision to NUREG-1280 is an expansion of the initial edition, which clarifies and expands upon several topics and addresses issues identified under Reform Amendment implementation experience.

  6. Acceptance criteria considerations for miscellaneous wastes

    SciTech Connect

    Irvine, A.R.; Forsberg, C.W.

    1987-01-01

    EPA standards set forth limitations regarding releases to the accessible environment adjacent to a geologic repository. The NRC criteria pertaining to waste form and engineered barrier performance place certain restrictions on the physical and chemical nature of the waste form and require substantially complete confinement of radioactivity until the high-heat-production period is past. After this period, the annual release of radionuclides from the waste package is normally limited to 1 part in 100,000 of the amounts calculated to be present at 1000-y decay. The regulation permits deviation from these criteria in exceptional circumstances. One such circumstance might be the absence of a significant perturbation in temperature around the stored waste. The lack of significant heat release will eliminate the hydrologic driving force for dispersal of radionuclides. Exceptional circumstances which potentially could justify a less stringent long-term release criterion are: small quantity of radioactivity, the nature of the radioactive species, and the nature of the geology in which the waste is to be emplaced. Because the MW after a suitable decay period have low heat release rates per unit volume, they apparently could be so emplaced in a repository that there would be no compelling need, according to the reasoning presented in 10 CFR 60, for a 1000-y container. Regarding attainment of the specified long-term release rate criterion, neither the solubility limits for the various waste forms nor the conductance of potential migration barriers are currently adequately characterized. The relatively small total heat generation rate for the MW in combination with the usual low volumetric heat generation rate apparently will allow application of migration barriers in a low temperature environment where barrier performance would be expected to be unchanged with time.

  7. Heat exchanger, head and shell acceptance criteria

    SciTech Connect

    Lam, P.S.; Sindelar, R.L.

    1992-09-01

    Instability of postulated flaws in the head component of the heat exchanger could not produce a large break, equivalent to a DEGB in the PWS piping, due to the configuration of the head and restraint provided by the staybolts. Rather, leakage from throughwall flaws in the head would increase with flaw length with finite leakage areas that are bounded by a post-instability flaw configuration. Postulated flaws at instability in the shell of the heat exchanger or in the cooling water nozzles could produce a large break in the Cooling Water System (CWS) pressure boundary. An initial analysis of flaw stability for postulated flaws in the heat exchanger head was performed in January 1992. This present report updates that analysis and, additionally, provides acceptable flaw configurations to maintain defined structural or safety margins against flaw instability of the external pressure boundary components of the heat exchanger, namely the head, shell, and cooling water nozzles. Structural and flaw stability analyses of the heat exchanger tubes, the internal pressure boundary of the heat exchangers or interface boundary between the PWS and CWS, were previously completed in February 1992 as part of the heat exchanger restart evaluation and are not covered in this report.

  8. Idaho CERCLA Disposal Facility Complex Waste Acceptance Criteria

    SciTech Connect

    W. Mahlon Heileson

    2006-10-01

    The Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) has been designed to accept CERCLA waste generated within the Idaho National Laboratory. Hazardous, mixed, low-level, and Toxic Substance Control Act waste will be accepted for disposal at the ICDF. The purpose of this document is to provide criteria for the quantities of radioactive and/or hazardous constituents allowable in waste streams designated for disposal at ICDF. This ICDF Complex Waste Acceptance Criteria is divided into four section: (1) ICDF Complex; (2) Landfill; (3) Evaporation Pond: and (4) Staging, Storage, Sizing, and Treatment Facility (SSSTF). The ICDF Complex section contains the compliance details, which are the same for all areas of the ICDF. Corresponding sections contain details specific to the landfill, evaporation pond, and the SSSTF. This document specifies chemical and radiological constituent acceptance criteria for waste that will be disposed of at ICDF. Compliance with the requirements of this document ensures protection of human health and the environment, including the Snake River Plain Aquifer. Waste placed in the ICDF landfill and evaporation pond must not cause groundwater in the Snake River Plain Aquifer to exceed maximum contaminant levels, a hazard index of 1, or 10-4 cumulative risk levels. The defined waste acceptance criteria concentrations are compared to the design inventory concentrations. The purpose of this comparison is to show that there is an acceptable uncertainty margin based on the actual constituent concentrations anticipated for disposal at the ICDF. Implementation of this Waste Acceptance Criteria document will ensure compliance with the Final Report of Decision for the Idaho Nuclear Technology and Engineering Center, Operable Unit 3-13. For waste to be received, it must meet the waste acceptance criteria for the specific disposal/treatment unit (on-Site or off-Site) for which it is destined.

  9. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA, JUNE 2006

    SciTech Connect

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION NEVADA SITE OFFICE

    2006-06-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  10. Waste-acceptance criteria for radioactive waste disposal

    SciTech Connect

    Gilbert, T.L.; Meshkov, N.K.

    1987-02-01

    A method has been developed for establishing waste-acceptance criteria based on quantitative performance factors that characterize the confinement capabilities of a disposal facility for radioactive waste. The method starts from the objective of protecting public health and safety by assuring that disposal of the waste will not result in a radiation dose of any member of the general public, in either the short or long term, in excess of an established basic dose limit. A key aspect of the method is the introduction of a confinement factor that characterizes the overall confinement capability of a particular disposal facility and can be used for quantitative performance assessments as well as for establishing facility-specific waste-acceptance criteria. Confinement factors enable direct and simple conversion of a basic dose limit into waste-acceptance criteria, specified as concentration limits on rationuclides in the waste streams. Waste-acceptance criteria can be represented visually as activity/time plots for various waste streams. These plots show the concentrations of radionuclides in a waste stream as a function of time and permit a visual, quantitative assessment of long-term performance, relative risks from different radionuclides in the waste stream, and contributions from ingrowth. Application of the method to generic facility designs provides a radional basis for a waste classification system. 14 refs.

  11. A comparison and cross-reference of commercial low-level radioactive waste acceptance criteria

    SciTech Connect

    Kerr, T.A.

    1997-04-01

    This document, prepared by the National Low-Level Waste Management Program at the Idaho National Engineering and Environmental Laboratory, is a comparison and cross-reference of commercial low-level radioactive waste acceptance criteria. Many of these are draft or preliminary criteria as well as implemented criteria at operating low-level radioactive waste management facilities. Waste acceptance criteria from the following entities are included: US Nuclear Regulatory Commission, South Carolina, Washington, Utah, Nevada, California, illinois, Texas, North Carolina, Nebraska, Pennsylvania, New York, and the Midwest Compact Region. Criteria in the matrix include the following: physical form, chemical form, liquid limits, void space in packages, concentration averaging, types of packaging, chelating agents, solidification media, stability requirements, sorptive media, gas, oil, biological waste, pyrophorics, source material, special nuclear material, package dimensions, incinerator ash, dewatered resin, transuranics, and mixed waste. Each criterion in the matrix is cross-referenced to its source document so that exact requirements can be determined.

  12. MCO combustible gas management leak test acceptance criteria

    SciTech Connect

    SHERRELL, D.L.

    1999-05-11

    Existing leak test acceptance criteria for mechanically sealed and weld sealed multi-canister overpacks (MCO) were evaluated to ensure that MCOs can be handled and stored in stagnant air without compromising the Spent Nuclear Fuel Project's overall strategy to prevent accumulation of combustible gas mixtures within MCO's or within their surroundings. The document concludes that the integrated leak test acceptance criteria for mechanically sealed and weld sealed MCOs (1 x 10{sup -5} std cc/sec and 1 x 10{sup -7} std cc/sec, respectively) are adequate to meet all current and foreseeable needs of the project, including capability to demonstrate compliance with the NFPA 60 Paragraph 3-3 requirement to maintain hydrogen concentrations [within the air atmosphere CSB tubes] t or below 1 vol% (i.e., at or below 25% of the LFL).

  13. Procedures and acceptance criteria for PAS-1 cask inspections

    SciTech Connect

    Mercado, J.E.

    1998-09-09

    The procedures and acceptance criteria that comprise this document were prepared to support a one-time test to certify two PAS-1 casks in accordance with US Department of Energy Certificate of Compliance US A/9184/B(U), which was issued in 1998. The specific inspections addressed in this document are the visual weld inspection and a dimensional inspection of the primary containment vessel.

  14. Waste-acceptance criteria for greater-confinement disposal

    SciTech Connect

    Gilbert, T.L.; Meshkov, N.K.

    1986-01-01

    A methodology for establishing waste-acceptance criteria based on quantitative performance factors that characterize the confinement capabilities of a waste-disposal site and facility has been developed. The methodology starts from the basic objective of protecting public health and safety by providing assurance that dispsoal of the waste will not result in a radiation dose to any member of the general public, in either the short or long term, in excess of an established basic dose limit. The method is based on an explicit, straightforward, and quantitative relationship among individual risk, confinement capabilities, and waste characteristics. A key aspect of the methodology is the introduction of a confinement factor that characterizes the overall confinement capability of a particular facility and can be used for quantitative assessments of the performance of different disposal sites and facilities, as well as for establishing site-specific waste-acceptance criteria. Confinement factors are derived by means of site-specific pathway analyses. They make possible a direct and simple conversion of a basic dose limit into waste-acceptance criteria, specified as concentration limits on radionuclides in the waste streams and expressed in quantitative form as a function of parameters that characterize the site, facility design, waste containers, and waste form. Waste-acceptance criteria can be represented visually as activity/time plots for various waste streams. These plots show the concentrations of radionuclides in a waste stream as a function of time and permit a visual, quantitative assessment of long-term performance, relative risks from different radionuclides in the waste stream, and contributions from ingrowth. 13 refs.

  15. Establishing seismic design criteria to achieve an acceptable seismic margin

    SciTech Connect

    Kennedy, R.P.

    1997-01-01

    In order to develop a risk based seismic design criteria the following four issues must be addressed: (1) What target annual probability of seismic induced unacceptable performance is acceptable? (2). What minimum seismic margin is acceptable? (3) Given the decisions made under Issues 1 and 2, at what annual frequency of exceedance should the Safe Shutdown Earthquake ground motion be defined? (4) What seismic design criteria should be established to reasonably achieve the seismic margin defined under Issue 2? The first issue is purely a policy decision and is not addressed in this paper. Each of the other three issues are addressed. Issues 2 and 3 are integrally tied together so that a very large number of possible combinations of responses to these two issues can be used to achieve the target goal defined under Issue 1. Section 2 lays out a combined approach to these two issues and presents three potentially attractive combined resolutions of these two issues which reasonably achieves the target goal. The remainder of the paper discusses an approach which can be used to develop seismic design criteria aimed at achieving the desired seismic margin defined in resolution of Issue 2. Suggestions for revising existing seismic design criteria to more consistently achieve the desired seismic margin are presented.

  16. 24 CFR 203.202 - Plan acceptability and acceptance renewal criteria-general.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... renewal criteria-general. 203.202 Section 203.202 Housing and Urban Development Regulations Relating to... initiation of sanctions against a Plan issuer or insurance backer, in accordance with 2 CFR part 2424. If HUD..., and the procedural safeguards of 2 CFR part 2424 will apply. (c) Unless renewed, Plan acceptance...

  17. 24 CFR 203.202 - Plan acceptability and acceptance renewal criteria-general.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... renewal criteria-general. 203.202 Section 203.202 Housing and Urban Development Regulations Relating to... initiation of sanctions against a Plan issuer or insurance backer, in accordance with 2 CFR part 2424. If HUD..., and the procedural safeguards of 2 CFR part 2424 will apply. (c) Unless renewed, Plan acceptance...

  18. 24 CFR 203.202 - Plan acceptability and acceptance renewal criteria-general.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... renewal criteria-general. 203.202 Section 203.202 Housing and Urban Development Regulations Relating to... initiation of sanctions against a Plan issuer or insurance backer, in accordance with 2 CFR part 2424. If HUD..., and the procedural safeguards of 2 CFR part 2424 will apply. (c) Unless renewed, Plan acceptance...

  19. Criteria for Identifying Radiologists with Acceptable Screening Mammography Interpretive Performance based on Multiple Performance Measures

    PubMed Central

    Miglioretti, Diana L.; Ichikawa, Laura; Smith, Robert A.; Bassett, Lawrence W.; Feig, Stephen A.; Monsees, Barbara; Parikh, Jay R.; Rosenberg, Robert D.; Sickles, Edward A.; Carney, Patricia A.

    2014-01-01

    Objective Using a combination of performance measures, we updated previously proposed criteria for identifying physicians whose performance interpreting screening mammograms may indicate suboptimal interpretation skills. Materials and Methods In this Institutional Review Board-approved, HIPAA-compliant study, six expert breast imagers used a method based on the Angoff approach to update criteria for acceptable mammography performance on the basis of combined performance measures: (Group 1) sensitivity and specificity, for facilities with complete capture of false-negative cancers; and (Group 2) cancer detection rate (CDR), recall rate, and positive predictive value of a recall (PPV1), for facilities that cannot capture false negatives, but have reliable cancer follow-up information for positive mammograms. Decisions were informed by normative data from the Breast Cancer Surveillance Consortium (BCSC). Results Updated, combined ranges for acceptable sensitivity and specificity of screening mammography are: (1) sensitivity ≥80% and specificity ≥85% or (2) sensitivity 75–79% and specificity 88–97%. Updated ranges for CDR, recall rate, and PPV1 are: (1) CDR ≥6/1000, recall rate 3–20%, and any PPV1; (2) CDR 4–6/1000, recall rate 3–15%, and PPV1 ≥3%; or (3) CDR 2.5–4/1000, recall rate 5–12%, and PPV1 3–8%. Using the original criteria, 51% of BCSC radiologists had acceptable sensitivity and specificity; 40% had acceptable CDR, recall rate, and PPV1. Using the combined criteria, 69% had acceptable sensitivity and specificity and 62% had acceptable CDR, recall rate, and PPV1. Conclusion The combined criteria improve previous criteria by considering the inter-relationships of multiple performance measures and broaden the acceptable performance ranges compared to previous criteria based on individual measures. PMID:25794100

  20. Data Quality Objectives for WTP Feed Acceptance Criteria - 12043

    SciTech Connect

    Arakali, Aruna V.; Benson, Peter A.; Duncan, Garth; Johnston, Jill C.; Lane, Thomas A.; Matis, George; Olson, John W.; Banning, Davey L.; Greer, Daniel A.; Seidel, Cary M.; Thien, Michael G.

    2012-07-01

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is under construction for the U.S. Department of Energy by Bechtel National, Inc. and subcontractor URS Corporation (contract no. DE-AC27-01RV14136). The plant when completed will be the world's largest nuclear waste treatment facility. Bechtel and URS are tasked with designing, constructing, commissioning, and transitioning the plant to the long term operating contractor to process the legacy wastes that are stored in underground tanks (from nuclear weapons production between the 1940's and the 1980's). Approximately 56 million gallons of radioactive waste is currently stored in these tanks at the Hanford Site in southeastern Washington. There are three major WTP facilities being constructed for processing the tank waste feed. The Pretreatment (PT) facility receives feed where it is separated into a low activity waste (LAW) fraction and a high level waste (HLW) fraction. These fractions are transferred to the appropriate (HLW or LAW) facility, combined with glass former material, and sent to high temperature melters for formation of the glass product. In addition to PT, HLW and LAW, other facilities in WTP include the Laboratory (LAB) for analytical services and the Balance of Facilities (BOF) for plant maintenance, support and utility services. The transfer of staged feed from the waste storage tanks and acceptance in WTP receipt vessels require data for waste acceptance criteria (WAC) parameters from analysis of feed samples. The Data Quality Objectives (DQO) development was a joint team effort between WTP and Tank Operations Contractor (TOC) representatives. The focus of this DQO effort was to review WAC parameters and develop data quality requirements, the results of which will determine whether or not the staged feed can be transferred from the TOC to WTP receipt vessels. The approach involved systematic planning for data collection consistent with EPA guidance for the seven-step DQO process

  1. Automated Transportation Management System (ATMS) V2.0 logistics module PBI acceptance criteria

    SciTech Connect

    Weidert, R.S.

    1995-02-28

    This document defines the acceptance criteria for the Automated Transportation Management System V2.0 Logistics Module Performance Based Incentive (PBI). This acceptance criteria will be the primary basis for the generation of acceptance test procedures. The purpose of this document is to define the minimum criteria that must be fulfilled to guarantee acceptance of the Logistics Module.

  2. Establishment of noise acceptance criteria for wind turbines

    NASA Technical Reports Server (NTRS)

    Stephens, D. G.; Shepherd, K. P.; Grosveld, F.

    1981-01-01

    A program is being conducted to develop noise criteria for wind turbines which minimize annoyance and which can be used in design specifications for future machines. The approach consists of presenting wind turbine noise stimuli to test subjects in a laboratory listening chamber. The responses of the subjects are recorded for a range of stimuli which encompass the designs, operating conditions, and ambient noise levels of current and future installations. Results to date have established the threshold of detectability for a range of impulsive stimuli of the type associated with blade/tower-wake interactions. The status of the ongoing psychoacoustic tests, the subjective data, and the approach to the development of noise acceptance criteria are described.

  3. Waste acceptance criteria for the Waste Isolation Pilot Plant

    SciTech Connect

    1996-04-01

    The Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC), DOE/WIPP-069, was initially developed by a U.S. Department of Energy (DOE) Steering Committee to provide performance requirements to ensure public health and safety as well as the safe handling of transuranic (TRU) waste at the WIPP. This revision updates the criteria and requirements of previous revisions and deletes those which were applicable only to the test phase. The criteria and requirements in this document must be met by participating DOE TRU Waste Generator/Storage Sites (Sites) prior to shipping contact-handled (CH) and remote-handled (RH) TRU waste forms to the WIPP. The WIPP Project will comply with applicable federal and state regulations and requirements, including those in Titles 10, 40, and 49 of the Code of Federal Regulations (CFR). The WAC, DOE/WIPP-069, serves as the primary directive for assuring the safe handling, transportation, and disposal of TRU wastes in the WIPP and for the certification of these wastes. The WAC identifies strict requirements that must be met by participating Sites before these TRU wastes may be shipped for disposal in the WIPP facility. These criteria and requirements will be reviewed and revised as appropriate, based on new technical or regulatory requirements. The WAC is a controlled document. Revised/changed pages will be supplied to all holders of controlled copies.

  4. Community acceptance of helicopter noise: Criteria and application

    NASA Technical Reports Server (NTRS)

    Munch, C. L.; King, R. J.

    1974-01-01

    A study was conducted to define those criteria necessary for civil helicopter operations to be acoustically acceptable to the communities from which they operate and over which they fly. The study involved surveying existing domestic and foreign Federal regulations and guidelines, state and local noise ordinances, results of community noise annoyance studies, and results of individual aircraft noise annoyance studies, and results of individual aircraft noise annoyance studies in order to establish the criteria. The final criteria selection are based on the Day-Night Level, L sub DN, a measure of total noise exposure. The basic rating unit is the A weighted sound pressure level (dbA) which has accuracy comparable to other units currently used for aircraft. An L sub DN of 60 is recommended as a criterion for areas where the ambient noise is below 58 dbA. An L sub DN value 2 dbA above the local ambient is recommended for areas where the ambient is above 58 dbA.

  5. Technical Basis For Radiological Acceptance Criteria For Uranium At The Y-12 National Security Complex

    SciTech Connect

    Veinot, K. G.

    2009-07-22

    The purpose of this report is to establish radiological acceptance criteria for uranium. Other factors for acceptance not considered include criticality safety concerns, contaminants to the process stream, and impacts to the Safety Basis for the affected facilities. Three types of criteria were developed in this report. They include limits on external penetrating and non-penetrating radiation and on the internal hazard associated with inhalation of the material. These criteria are intended to alleviate the need for any special controls beyond what are normally utilized for worker protection from uranium hazards. Any proposed exceptions would require case-by-case evaluations to determine cost impacts and feasibility. Since Y-12 has set rigorous ALARA goals for worker doses, the external limits are based on assumptions of work time involved in the movement of accepted material plus the desire that external doses normally received are not exceeded, and set so that no special personnel monitoring would be required. Internal hazard controls were established so that dose contributions from non-uranium nuclides would not exceed 10% of that expected from the uranium component. This was performed using a Hazard Index (HI) previously established for work in areas contaminated with non-uranium nuclides. The radiological acceptance criteria for uranium are summarized in Table 1. Note that these limits are based on the assumption that radioactive daughter products have reached equilibrium.

  6. Criteria for Producing CLIL Learning Material

    ERIC Educational Resources Information Center

    Mehisto, Peeter

    2012-01-01

    This article first describes some general criteria that can be applied to the development of any type of learning materials. Second, the article lists criteria for creating CLIL (content and language integrated learning)-specific learning materials, and provides examples of how to apply each proposed criterion whilst also providing a corresponding…

  7. Radioactive waste acceptance team and generator interface yields successful implementation of waste acceptance criteria

    SciTech Connect

    Rowe, J.G.; Griffin, W.A.; Rast, D.M.

    1996-02-01

    The Fernald Environmental Management Project has developed a successful Low Level Waste Shipping Program in compliance with the Nevada Test Site Defense Waste Acceptance Criteria, Certification, and Transfer Requirements, NVO-325, Revision 1. This shipping program is responsible for the successful disposal of more than 4 million cubic feet of Low Level Waste over the past decade. The success of the Fernald Low Level Waste Shipping Program is due to the generator program staff working closely with the DOE-NV Radioactive Waste Acceptance Program Team to achieve win/win situations. The teamwork is the direct result of dedicated, proactive professionals working together toward a common objective: the safe disposition of low level radioactive waste. The growth and development of this program has many lessons learned to share with the low level waste generating community. The recognition of reciprocal interests enables consistently high annual volumes of Fernald waste disposal at the Nevada Test Site without incident. The large volumes successfully disposed serve testimony to the success of the program which is equally important to all Nevada Test Site and Fernald stakeholders. The Fernald approach to success is currently being shared with other low-level waste generators through DOE-NV sponsored outreach programs. This paper introduces examples of Fernald Environmental Restoration Management Corporation contributions to the DOE-NV Radioactive Waste Acceptance Program outreach initiatives. These practices are applicable to other low level waste disposal programs whether federal, commercial, domestic or international.

  8. ENVIROCARE OF UTAH: EXPANDING WASTE ACCEPTANCE CRITERIA TO PROVIDE LOW-LEVEL AND MIXED WASTE DISPOSAL OPTIONS

    SciTech Connect

    Rogers, B.; Loveland, K.

    2003-02-27

    Envirocare of Utah operates a low-level radioactive waste disposal facility 80 miles west of Salt Lake City in Clive, Utah. Accepted waste types includes NORM, 11e2 byproduct material, Class A low-level waste, and mixed waste. Since 1988, Envirocare has offered disposal options for environmental restoration waste for both government and commercial remediation projects. Annual waste receipts exceed 12 million cubic feet. The waste acceptance criteria (WAC) for the Envirocare facility have significantly expanded to accommodate the changing needs of restoration projects and waste generators since its inception, including acceptable physical waste forms, radiological acceptance criteria, RCRA requirements and treatment capabilities, PCB acceptance, and liquids acceptance. Additionally, there are many packaging, transportation, and waste management options for waste streams acceptable at Envirocare. Many subcontracting vehicles are also available to waste generators for both government and commercial activities.

  9. 7 CFR 42.107 - Lot acceptance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... acceptance (Ac) and rejection (Re) numbers in the sampling plan. (1) Accept the lot after examining the...) The number of critical defects does not exceed the applicable acceptance number (Ac) for critical defects, and (ii) The number of major defects does not exceed the applicable acceptance number (Ac)...

  10. Variation transmission model for setting acceptance criteria in a multi-staged pharmaceutical manufacturing process.

    PubMed

    Montes, Richard O

    2012-03-01

    Pharmaceutical manufacturing processes consist of a series of stages (e.g., reaction, workup, isolation) to generate the active pharmaceutical ingredient (API). Outputs at intermediate stages (in-process control) and API need to be controlled within acceptance criteria to assure final drug product quality. In this paper, two methods based on tolerance interval to derive such acceptance criteria will be evaluated. The first method is serial worst case (SWC), an industry risk minimization strategy, wherein input materials and process parameters of a stage are fixed at their worst-case settings to calculate the maximum level expected from the stage. This maximum output then becomes input to the next stage wherein process parameters are again fixed at worst-case setting. The procedure is serially repeated throughout the process until the final stage. The calculated limits using SWC can be artificially high and may not reflect the actual process performance. The second method is the variation transmission (VT) using autoregressive model, wherein variation transmitted up to a stage is estimated by accounting for the recursive structure of the errors at each stage. Computer simulations at varying extent of variation transmission and process stage variability are performed. For the scenarios tested, VT method is demonstrated to better maintain the simulated confidence level and more precisely estimate the true proportion parameter than SWC. Real data examples are also presented that corroborate the findings from the simulation. Overall, VT is recommended for setting acceptance criteria in a multi-staged pharmaceutical manufacturing process.

  11. Proliferation resistance criteria for fissile material disposition

    SciTech Connect

    Close, D.A.; Fearey, B.L.; Markin, J.T.; Rutherford, D.A.; Duggan, R.A.; Jaeger, C.D.; Mangan, D.L.; Moya, R.W.; Moore, L.R.; Strait, R.S.

    1995-04-01

    The 1994 National Academy of Sciences study {open_quotes}Management and Disposition of Excess Weapons Plutonium{close_quotes} defined options for reducing the national and international proliferation risks of materials declared excess to the nuclear weapons program. This report proposes criteria for assessing the proliferation resistance of these options. The criteria are general, encompassing all stages of the disposition process from storage through intermediate processing to final disposition including the facilities, processing technologies and materials, the level of safeguards for these materials, and the national/subnational threat to the materials.

  12. Human factors engineering design review acceptance criteria for the safety parameter display

    SciTech Connect

    McGevna, V.; Peterson, L.R.

    1981-10-02

    This report contains human factors engineering design review acceptance criteria developed by the Human Factors Engineering Branch (HFEB) of the Nuclear Regulatory Commission (NRC) to use in evaluating designs of the Safety Parameter Display System (SPDS). These criteria were developed in response to the functional design criteria for the SPDS defined in NUREG-0696, Functional Criteria for Emergency Response Facilities. The purpose of this report is to identify design review acceptance criteria for the SPDS installed in the control room of a nuclear power plant. Use of computer driven cathode ray tube (CRT) displays is anticipated. General acceptance criteria for displays of plant safety status information by the SPDS are developed. In addition, specific SPDS review criteria corresponding to the SPDS functional criteria specified in NUREG-0696 are established.

  13. 46 CFR 54.05-17 - Weld toughness test acceptance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... PRESSURE VESSELS Toughness Tests § 54.05-17 Weld toughness test acceptance criteria. (a) For Charpy V-notch impact tests the energy absorbed in both the weld metal and heat affected zone impact tests in weld... 46 Shipping 2 2010-10-01 2010-10-01 false Weld toughness test acceptance criteria....

  14. 48 CFR 15.607 - Criteria for acceptance and negotiation of an unsolicited proposal.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Criteria for acceptance... System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Unsolicited Proposals 15.607 Criteria for acceptance and negotiation of an unsolicited proposal. (a)...

  15. 48 CFR 915.607 - Criteria for acceptance and negotiation of an unsolicited proposal.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Criteria for acceptance... System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Unsolicited Proposals 915.607 Criteria for acceptance and negotiation of an unsolicited proposal. (c) DOE's...

  16. Development of J-integral based UT flaw acceptance criteria for Savannah River reactor tanks

    SciTech Connect

    Mehta, H.S.; Ranganath, S.; Awadalla, N.G.; Sindelar, R.L.; Caskey, G.R. Jr.; Daugherty, W.L.

    1991-12-31

    The tank of a Savannah River Site reactor is a cylinder approximately 16 feet in diameter and 14 feet high and is not pressurized except for a 5 psig helium blanket gas in addition to the hydrostatic head of the heavy water (D{sub 2}O) moderator. The tank is made of Type 304 Stainless steel fabricated into cylindrical shells with 0.5 inch thick four to six wrought plates per vessel. The shell was made up in two flat half-sections for later rolling and welding. The tank bottom section containing the moderator effluent nozzles was welded to the shell in a T-Joint configuration. An ultrasonic (UT) in-service inspection program has been developed for the examination of these reactor tanks. Prior to the initiation of these inspections, criteria for the disposition of any indications that may be found were required. This paper describes the fracture mechanics evaluations that formed the technical bases for the flaw acceptance criteria. The fracture mechanics evaluation considered detailed finite element calculated stress states in the various regions of the tanks, measured irradiated fracture toughness properties (irradiated condition material J-R curves), fluence levels in the tanks, and intergranular stress corrosion cracking growth rates in the reactor environment. The irradiation program was conducted at the High Flux Isotope Reactor at Oak Ridge National Laboratory. Tensile and fracture toughness data were obtained from 36 compact tension, tensile and Charpy V-notch specimens. Through wall cracks are postulated in various regions of the tank and critical crack lengths are calculated by the elastic-plastic fracture mechanics based J-Integral/Tearing Modulus (J/T) approach. The applied values of J-integral were calculated by the well-known GE/EPRI estimation scheme. Acceptable crack lengths are then calculated following generally accepted safety factors based on the ASME Pressure Vessel Code. The acceptance criteria are then briefly described.

  17. Development of J-integral based UT flaw acceptance criteria for Savannah River reactor tanks

    SciTech Connect

    Mehta, H.S.; Ranganath, S. . Nuclear Energy Div.); Awadalla, N.G.; Sindelar, R.L.; Caskey, G.R. Jr.; Daugherty, W.L. )

    1991-01-01

    The tank of a Savannah River Site reactor is a cylinder approximately 16 feet in diameter and 14 feet high and is not pressurized except for a 5 psig helium blanket gas in addition to the hydrostatic head of the heavy water (D{sub 2}O) moderator. The tank is made of Type 304 Stainless steel fabricated into cylindrical shells with 0.5 inch thick four to six wrought plates per vessel. The shell was made up in two flat half-sections for later rolling and welding. The tank bottom section containing the moderator effluent nozzles was welded to the shell in a T-Joint configuration. An ultrasonic (UT) in-service inspection program has been developed for the examination of these reactor tanks. Prior to the initiation of these inspections, criteria for the disposition of any indications that may be found were required. This paper describes the fracture mechanics evaluations that formed the technical bases for the flaw acceptance criteria. The fracture mechanics evaluation considered detailed finite element calculated stress states in the various regions of the tanks, measured irradiated fracture toughness properties (irradiated condition material J-R curves), fluence levels in the tanks, and intergranular stress corrosion cracking growth rates in the reactor environment. The irradiation program was conducted at the High Flux Isotope Reactor at Oak Ridge National Laboratory. Tensile and fracture toughness data were obtained from 36 compact tension, tensile and Charpy V-notch specimens. Through wall cracks are postulated in various regions of the tank and critical crack lengths are calculated by the elastic-plastic fracture mechanics based J-Integral/Tearing Modulus (J/T) approach. The applied values of J-integral were calculated by the well-known GE/EPRI estimation scheme. Acceptable crack lengths are then calculated following generally accepted safety factors based on the ASME Pressure Vessel Code. The acceptance criteria are then briefly described.

  18. Evaluation of ISDP Batch 2 Qualification Compliance to 512-S, DWPF, Tank Farm, and Saltstone Waste Acceptance Criteria

    SciTech Connect

    Shafer, A.

    2010-05-05

    The purpose of this report is to document the acceptability of the second macrobatch (Salt Batch 2) of Tank 49H waste to H Tank Farm, DWPF, and Saltstone for operation of the Interim Salt Disposition Project (ISDP). Tank 49 feed meets the Waste Acceptance Criteria (WAC) requirements specified by References 11, 12, and 13. Salt Batch 2 material is qualified and ready to be processed through ARP/MCU to the final disposal facilities.

  19. Elastic-Plastic Strain Acceptance Criteria for Structures Subject to Rapidly Applied Transient Dynamic Loading

    SciTech Connect

    W.R. Solonick

    2003-04-01

    Rapidly applied transient dynamic loads produce stresses and deflections in structures that typically exceed those from static loading conditions. Previous acceptance criteria for structures designed for rapidly applied transient dynamic loading limited stresses to those determined from elastic analysis. Different stress limits were established for different grades of structure depending upon the amount of permanent set considered acceptable. Structure allowed to sustain very limited permanent set is designed to stress limits not significantly greater than yield stress. Greater permanent set in structure under rapidly applied transient dynamic loading conditions is permitted by establishing stress limits that are significantly greater than yield stress but still provide adequate safety margin (with respect to failure). This paper presents a strain-based elastic-plastic (i.e., inelastic) analysis criterion developed as an alternative to the more conservative stress-based elastic analysis stress criterion for structures subjected to rapidly applied transient dynamic loading. The strain limits established are based on material ductility considerations only and are set as a fraction of the strain at ultimate stress obtained from an engineering stress/strain curve of the material. Strains limits are categorized by type as membrane or surface and by region as general, local , or concentrated. The application of the elastic-plastic criterion provides a more accurate, less conservative design/analysis basis for structures than that used in elastic stress-based analysis criteria, while still providing adequate safety margins.

  20. Nevada Test Site waste acceptance criteria [Revision 1

    SciTech Connect

    1997-08-01

    Revision one updates the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document.

  1. Example Procedures for Developing Acceptance-Range Criteria for BESTEST-EX

    SciTech Connect

    Judkoff, R.; Polly, B.; Bianchi, M.; Neymark, J.

    2010-08-01

    This document provides an example procedure for establishing acceptance-range criteria to assess results from software undergoing BESTEST-EX. This example method for BESTEST-EX is a modified version of the method described in HERS BESTEST.

  2. Tensile failure criteria for fiber composite materials

    NASA Technical Reports Server (NTRS)

    Rosen, B. W.; Zweben, C. H.

    1972-01-01

    The analysis provides insight into the failure mechanics of these materials and defines criteria which serve as tools for preliminary design material selection and for material reliability assessment. The model incorporates both dispersed and propagation type failures and includes the influence of material heterogeneity. The important effects of localized matrix damage and post-failure matrix shear stress transfer are included in the treatment. The model is used to evaluate the influence of key parameters on the failure of several commonly used fiber-matrix systems. Analyses of three possible failure modes were developed. These modes are the fiber break propagation mode, the cumulative group fracture mode, and the weakest link mode. Application of the new model to composite material systems has indicated several results which require attention in the development of reliable structural composites. Prominent among these are the size effect and the influence of fiber strength variability.

  3. 10 CFR 50.46a - Acceptance criteria for reactor coolant system venting systems.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... criteria for reactor coolant system venting systems. Each nuclear power reactor must be provided with high... 10 Energy 1 2012-01-01 2012-01-01 false Acceptance criteria for reactor coolant system venting systems. 50.46a Section 50.46a Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION...

  4. 10 CFR 50.46a - Acceptance criteria for reactor coolant system venting systems.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... criteria for reactor coolant system venting systems. Each nuclear power reactor must be provided with high... 10 Energy 1 2011-01-01 2011-01-01 false Acceptance criteria for reactor coolant system venting systems. 50.46a Section 50.46a Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION...

  5. 10 CFR 50.46a - Acceptance criteria for reactor coolant system venting systems.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... criteria for reactor coolant system venting systems. Each nuclear power reactor must be provided with high... 10 Energy 1 2014-01-01 2014-01-01 false Acceptance criteria for reactor coolant system venting systems. 50.46a Section 50.46a Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION...

  6. 10 CFR 50.46a - Acceptance criteria for reactor coolant system venting systems.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... criteria for reactor coolant system venting systems. Each nuclear power reactor must be provided with high... 10 Energy 1 2013-01-01 2013-01-01 false Acceptance criteria for reactor coolant system venting systems. 50.46a Section 50.46a Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION...

  7. 10 CFR 50.46a - Acceptance criteria for reactor coolant system venting systems.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Acceptance criteria for reactor coolant system venting... criteria for reactor coolant system venting systems. Each nuclear power reactor must be provided with high point vents for the reactor coolant system, for the reactor vessel head, and for other systems...

  8. 46 CFR 164.120-7 - Acceptance criteria.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS...) Ultimate strength, flatwise ISO 14125 or ASTM D 790 345 MPa (50,000 lb/in2). (ii) Initial modulus of...) Ultimate strength, flatwise ISO 14125 or ASTM D 790 310 MPa (45,000 lb/in2). (ii) Initial modulus...

  9. 24 CFR 203.202 - Plan acceptability and acceptance renewal criteria-general.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... the Plan. (b) In evaluating applications for renewal of Plan acceptance, HUD will take into consideration such reliable evidence, as is made available to the Department, of a Plan issuer's failure to fulfill its obligations. Where HUD has credible evidence of a Plan issuer's failure to correct...

  10. 24 CFR 203.202 - Plan acceptability and acceptance renewal criteria-general.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... initiation of sanctions against a Plan issuer or insurance backer, in accordance with 2 CFR part 2424. If HUD..., and the procedural safeguards of 2 CFR part 2424 will apply. (c) Unless renewed, Plan acceptance by... accordance with 2 CFR part 2424. Insofar as practicable, HUD will respond to a Plan issuer's request...

  11. Evaluation of Sludge Batch 5 Qualification with ISDP Salt Batch 1 Compliance to DWPF Waste Acceptance Criteria

    SciTech Connect

    Shafer, A.

    2010-05-05

    The purpose of this report is to document the acceptability of Sludge Batch 5 with the initial macrobatch operation of the Interim Salt Disposition Project (ISDP) waste to the Defense Waste Processing Facility (DWPF). This report was prepared to comply with the requirements listed in the Waste Acceptance Criteria for Sludge, Actinide Removal Process (ARP), and Modular Caustic Side Solvent Extraction Unit (MCU) Process Transfers to 512-S and DWPF. The requirements for transfers to 512-S were evaluated during ISDP Salt Batch 1 qualification. The calculations of sludge concentrations are based entirely on the Tank 51 sample processed at SRNL. This is conservative because Tank 51 is blended with the dilute feed in the DWPF Feed Tank (Tank 40). This report documents the acceptability of sludge only as well as Sludge Batch 5 sludge slurry combined with ARP/MCU products for feed to DWPF. All criteria were met for unblended Tank 51 material.

  12. 16 CFR 1505.8 - Maximum acceptable material temperatures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Maximum acceptable material temperatures... ARTICLES INTENDED FOR USE BY CHILDREN Regulations § 1505.8 Maximum acceptable material temperatures. The maximum acceptable material temperatures for electrically operated toys shall be as follows (Classes...

  13. 16 CFR 1505.8 - Maximum acceptable material temperatures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Maximum acceptable material temperatures... ARTICLES INTENDED FOR USE BY CHILDREN Regulations § 1505.8 Maximum acceptable material temperatures. The maximum acceptable material temperatures for electrically operated toys shall be as follows (Classes...

  14. 16 CFR 1505.8 - Maximum acceptable material temperatures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Maximum acceptable material temperatures... ARTICLES INTENDED FOR USE BY CHILDREN Regulations § 1505.8 Maximum acceptable material temperatures. The maximum acceptable material temperatures for electrically operated toys shall be as follows (Classes...

  15. 16 CFR 1505.8 - Maximum acceptable material temperatures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Maximum acceptable material temperatures... ARTICLES INTENDED FOR USE BY CHILDREN Regulations § 1505.8 Maximum acceptable material temperatures. The maximum acceptable material temperatures for electrically operated toys shall be as follows (Classes...

  16. 16 CFR 1505.8 - Maximum acceptable material temperatures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Maximum acceptable material temperatures... ARTICLES INTENDED FOR USE BY CHILDREN Regulations § 1505.8 Maximum acceptable material temperatures. The maximum acceptable material temperatures for electrically operated toys shall be as follows (Classes...

  17. Nevada Test Site Waste Acceptance Criteria (NTSWAC), Rev. 7-01

    SciTech Connect

    NSTec Environmental Management

    2009-05-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NTSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex for disposal.

  18. Waste acceptance criteria for the Waste Isolation Pilot Plant. Revision 4

    SciTech Connect

    Not Available

    1991-12-01

    This Revision 4 of the Waste Acceptance Criteria (WAC), WIPP-DOE-069, identifies and consolidates existing criteria and requirements which regulate the safe handling and preparation of Transuranic (TRU) waste packages for transportation to and emplacement in the Waste Isolation Pilot Plant (WIPP). This consolidation does not invalidate any existing certification of TRU waste to the WIPP Operations and Safety Criteria (Revision 3 of WIPP-DOE--069) and/or Transportation: Waste Package Requirements (TRUPACT-II Safety Analysis Report for Packaging [SARP]). Those documents being consolidated, including Revision 3 of the WAC, currently support the Test Phase.

  19. Acceptance criteria for determining armed response force size at nuclear power plants

    SciTech Connect

    Not Available

    1983-02-01

    This guidance document contains acceptance criteria to be used in the NRC license review process. It consists of a scored worksheet and guidelines for interpreting the worksheet score that can be used in determining the adequacy of the armed response force size at a nuclear power reactor facility.

  20. La composition academique: les limites de l'acceptabilite (Composition for Academic Purposes: Criteria for Acceptability).

    ERIC Educational Resources Information Center

    Grenall, G. M.

    1981-01-01

    Examines the pedagogical approaches and problems attendant to the development of English writing programs for foreign students. Discusses the skills necessary to handle course work, such as essay tests, term papers and reports, theses and dissertations, and focuses particularly on diagnostic problems and acceptability criteria. Societe Nouvelle…

  1. 46 CFR 28.275 - Acceptance criteria for instructors and course curricula.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... the Boundary Lines or With More Than 16 Individuals On Board, or for Fish Tender Vessels Engaged in the Aleutian Trade § 28.275 Acceptance criteria for instructors and course curricula. (a) A Fishing... the contingencies listed in 46 CFR 28.270(a) including— (i) Experience as an instructor; or...

  2. 46 CFR 28.275 - Acceptance criteria for instructors and course curricula.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... the Boundary Lines or With More Than 16 Individuals On Board, or for Fish Tender Vessels Engaged in the Aleutian Trade § 28.275 Acceptance criteria for instructors and course curricula. (a) A Fishing... the contingencies listed in 46 CFR 28.270(a) including— (i) Experience as an instructor; or...

  3. 46 CFR 28.275 - Acceptance criteria for instructors and course curricula.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... the Boundary Lines or With More Than 16 Individuals On Board, or for Fish Tender Vessels Engaged in the Aleutian Trade § 28.275 Acceptance criteria for instructors and course curricula. (a) A Fishing... the contingencies listed in 46 CFR 28.270(a) including— (i) Experience as an instructor; or...

  4. 46 CFR 28.275 - Acceptance criteria for instructors and course curricula.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... the Boundary Lines or With More Than 16 Individuals On Board, or for Fish Tender Vessels Engaged in the Aleutian Trade § 28.275 Acceptance criteria for instructors and course curricula. (a) A Fishing... the contingencies listed in 46 CFR 28.270(a) including— (i) Experience as an instructor; or...

  5. 46 CFR 28.275 - Acceptance criteria for instructors and course curricula.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... the Boundary Lines or With More Than 16 Individuals On Board, or for Fish Tender Vessels Engaged in the Aleutian Trade § 28.275 Acceptance criteria for instructors and course curricula. (a) A Fishing... the contingencies listed in 46 CFR 28.270(a) including— (i) Experience as an instructor; or...

  6. Strength criteria for composite materials (a literature survey)

    NASA Technical Reports Server (NTRS)

    Roode, F.

    1982-01-01

    Literature concerning strength (failure) criteria for composite materials is reviewed with emphasis on phenomenological failure criteria. These criteria are primarily intended to give a good estimation of the safety margin with respect to failure for arbitrary multiaxial stress states. The failure criteria do not indicate the types of fracture that will occur in the material. The collection of failure criteria is evaluated for applicability for the glass reinforced plastics used in mine detectors. Material tests necessary to determine the parameters in the failure criteria are discussed.

  7. Wall thinning acceptance criteria for degraded carbon steel piping systems using FAD methodology

    SciTech Connect

    Lam, P.S.; Gupta, N.K.

    1995-02-01

    As part of the structural integrity assessment for Savannah River Site (SRS) piping systems, an acceptance criteria methodology for minimum pipe wall thickness has been developed for carbon steel piping. If a measured pipe thickness during inspection cannot meet the 87.5% of the nominal wall thickness specified in the ASME Code Case N-480, the acceptance criteria must be invoked. For a particular pipe, the larger of the two minimum thickness values obtained from the code stress check and the CEGB-R6 Failure Assessment Diagram (FAD) methodology is the minimum wall thickness for the acceptance criteria. The code stress check is based on the ASME/ANSI B31.1 Code, ASME Code Case N-480, and the SRS reactor restart criteria. The pipe wall thickness is calculated from the code equations and the applied loads. In fracture analysis, three types of axial and circumferential flaws are assumed to exist in the pipes based on the weld defects found in service history. For each flaw configuration, the stress intensity factors and the limit load solutions are calculated. These quantities are input to FAD to solve for the corresponding wall thickness required for the pipe to sustain the postulated flaws and to meet ASME safety margins under the applied loads.

  8. TRU waste acceptance criteria for the Waste Isolation Pilot Plant: Revision 3

    SciTech Connect

    Not Available

    1989-01-01

    This document is intended to delineate the criteria by which unclassified waste will be accepted for emplacement at the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico and describe the bases upon which these criteria were established. These criteria are not intended to be specifications but rather limits that will allow waste generating and shipping sites to develop their own procedures and specifications for preparation of TRU waste for shipment to the WIPP. These criteria will also allow waste generating sites to plan future facilities for waste preparation that will produce TRU waste forms compatible with WIPP waste emplacement and isolation requirements. These criteria only apply to contract-handled (CH) and remote-handled (RH) transuranic (TRU) waste forms and are not intended to apply to beta-gamma wastes, spent fuel, high-level waste (HLW), low-level waste (LLW), low specific activity (LSA) waste, or forms of radioactive waste for experimental purposes. Specifications for receipt of experimental waste forms will be prepared by the responsible projects in conjunction with the staff of the WIPP project at a later date. In addition, these criteria only apply to waste emplaced in bedded rock salt. Technical bases for these criteria may differ significantly from those for other host rocks. 25 refs. 4 figs., 1 tab.

  9. LANL Waste acceptance criteria, Chapter 3, radioactive liquid waste treatment facility

    SciTech Connect

    McClenahan, Robert L.

    2006-08-01

    The Radioactive Liquid Waste Treatment Facility (RLWTF) receives and treats aqueous radioactive wastewater generated at Los Alamos National Laboratory (LANL) to meet he discharge criteria specified in a National Pollution Discharge Elimination System (NPDES) permit. The majority of this wastewater is received at the RL WTF through a network of buried pipelines, known as the Radioactive Liquid Waste Collection System (RLWCS). Other wastewater is transported to the RL WTF by truck. The Waste Acceptance Criteria (WAC) outlined in this Chapter are applicable to all radioactive wastewaters which are conveyed to the Technical Area 50(T A-50), RL WTF by the RL WCS or by truck.

  10. Defining waste acceptance criteria for the Hanford Replacement Cross-Site Transfer System

    SciTech Connect

    Hudson, J.D.

    1996-04-01

    This document provides a methodology for defining waste acceptance criteria for the Hanford Replacement Cross-Site Transfer System (RCSTS). This methodology includes characterization, transport analysis, and control. A framework is described for each of these functions. A tool was developed for performing the calculations associated with the transport analysis. This tool, a worksheet that is available in formats acceptable for a variety of PC spreadsheet programs, enables a comparison of the pressure required to transport a given slurry at a rate that particulate suspension is maintained to the pressure drop available from the RCSTS.

  11. HOW TO DEAL WITH WASTE ACCEPTANCE UNCERTAINTY USING THE WASTE ACCEPTANCE CRITERIA FORECASTING AND ANALYSIS CAPABILITY SYSTEM (WACFACS)

    SciTech Connect

    Redus, K. S.; Hampshire, G. J.; Patterson, J. E.; Perkins, A. B.

    2002-02-25

    The Waste Acceptance Criteria Forecasting and Analysis Capability System (WACFACS) is used to plan for, evaluate, and control the supply of approximately 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous wastes from over 60 environmental restoration projects between FY02 through FY10 to the Oak Ridge Environmental Management Waste Management Facility (EMWMF). WACFACS is a validated decision support tool that propagates uncertainties inherent in site-related contaminant characterization data, disposition volumes during EMWMF operations, and project schedules to quantitatively determine the confidence that risk-based performance standards are met. Trade-offs in schedule, volumes of waste lots, and allowable concentrations of contaminants are performed to optimize project waste disposition, regulatory compliance, and disposal cell management.

  12. Development of Waste Acceptance Criteria at 221-U Building: Initial Flow and Transport Scoping Calculations

    SciTech Connect

    Freedman, Vicky L.; Zhang, Z. F.; Keller, Jason M.; Chen, Yousu

    2007-05-30

    This report documents numerical flow and transport simulations performed that establish initial waste acceptance criteria for the potential waste streams that may be safely sequestered in the 221-U Building and similar canyon structures. Specifically, simulations were executed to identify the maximum loading of contaminant mass (without respect to volume) that can be emplaced within the 221-U Building with no more than 1 pCi/m2 of contaminant migrating outside the structure within a 1,000 year time period. The initial scoping simulations were executed in one dimension to assess important processes, and then two dimensions to establish waste acceptance criteria. Two monolithic conditions were assessed: (1) a grouted canyon monolith; and (2) a canyon monolith filled with sand, both assuming no cracks or fissures were present to cause preferential transport. A three-staged approach was taken to account for different processes that may impact the amount of contaminant that can be safely sequestered in canyon structure. In the first stage, flow and transport simulations established waste acceptance criteria based on a linear (Kd) isotherm approach. In the second stage, impacts on thermal loading were examined and the differences in waste acceptance criteria quantified. In the third stage of modeling, precipitation/dissolution reactions were considered on the release and transport of the contaminants, and the subsequent impact on the maximum contaminant loading. The reactive transport modeling is considered a demonstration of the reactive transport capability, and shows the importance of its use for future performance predictions once site-specific data have been obtained.

  13. PCR for Detection of Herpes Simplex Virus in Cerebrospinal Fluid: Alternative Acceptance Criteria for Diagnostic Workup

    PubMed Central

    Alonso, Roberto; de Egea, Viviana; Usubillaga, Rafael; Muñoz, Patricia; Bouza, Emilio

    2013-01-01

    The determination of herpes simplex virus (HSV) infection using a PCR assay is one of the most commonly requested tests for analysis of cerebrospinal fluid (CSF), although only a very low proportion of results are positive. A previously reported study showed that selecting only those CSF samples with >5 leukocytes/mm3 or a protein level of >50 mg/dl was adequate for the diagnostic workup. The aim of the present study was to assess the reliability of alternative acceptance criteria based on elevated CSF white blood cell counts (>10 cells/mm3). We analyzed all requests for HSV PCR received between January 2008 and December 2011. CSF samples were accepted for analysis if they had >10 cells/mm3 or if the sample was from an immunocompromised patient or a child aged <2 years. In order to evaluate our selection criteria, we identified those CSF samples with a leukocyte count of 5 to 10 cells/mm3 or protein levels of >50 mg/dl in order to test them for HSV type 1 and 2 (HSV-1 and HSV-2) DNA. During the study period, 466 CSF samples were submitted to the microbiology laboratory for HSV PCR. Of these, 268 (57.5%) were rejected, and 198 (42.5%) were tested according to our routine criteria. Of the tested samples, 11 (5.5%) were positive for HSV DNA (7 for HSV-1 and 4 for HSV-2). Of the 268 rejected specimens, 74 met the criteria of >5 cells/mm3 and/or protein levels of >50 mg/dl. Of these, 70 (94.6%) were available for analysis. None of the samples yielded a positive HSV PCR result. Acceptance criteria based on CSF leukocyte counts, host immune status, and age can help to streamline the application of HSV PCR without reducing sensitivity. PMID:23804382

  14. Data Acceptance Criteria for Standardized Human-Associated Fecal Source Identification Quantitative Real-Time PCR Methods.

    PubMed

    Shanks, Orin C; Kelty, Catherine A; Oshiro, Robin; Haugland, Richard A; Madi, Tania; Brooks, Lauren; Field, Katharine G; Sivaganesan, Mano

    2016-05-01

    There is growing interest in the application of human-associated fecal source identification quantitative real-time PCR (qPCR) technologies for water quality management. The transition from a research tool to a standardized protocol requires a high degree of confidence in data quality across laboratories. Data quality is typically determined through a series of specifications that ensure good experimental practice and the absence of bias in the results due to DNA isolation and amplification interferences. However, there is currently a lack of consensus on how best to evaluate and interpret human fecal source identification qPCR experiments. This is, in part, due to the lack of standardized protocols and information on interlaboratory variability under conditions for data acceptance. The aim of this study is to provide users and reviewers with a complete series of conditions for data acceptance derived from a multiple laboratory data set using standardized procedures. To establish these benchmarks, data from HF183/BacR287 and HumM2 human-associated qPCR methods were generated across 14 laboratories. Each laboratory followed a standardized protocol utilizing the same lot of reference DNA materials, DNA isolation kits, amplification reagents, and test samples to generate comparable data. After removal of outliers, a nested analysis of variance (ANOVA) was used to establish proficiency metrics that include lab-to-lab, replicate testing within a lab, and random error for amplification inhibition and sample processing controls. Other data acceptance measurements included extraneous DNA contamination assessments (no-template and extraction blank controls) and calibration model performance (correlation coefficient, amplification efficiency, and lower limit of quantification). To demonstrate the implementation of the proposed standardized protocols and data acceptance criteria, comparable data from two additional laboratories were reviewed. The data acceptance criteria

  15. Data Acceptance Criteria for Standardized Human-Associated Fecal Source Identification Quantitative Real-Time PCR Methods

    PubMed Central

    Kelty, Catherine A.; Oshiro, Robin; Haugland, Richard A.; Madi, Tania; Brooks, Lauren; Field, Katharine G.; Sivaganesan, Mano

    2016-01-01

    There is growing interest in the application of human-associated fecal source identification quantitative real-time PCR (qPCR) technologies for water quality management. The transition from a research tool to a standardized protocol requires a high degree of confidence in data quality across laboratories. Data quality is typically determined through a series of specifications that ensure good experimental practice and the absence of bias in the results due to DNA isolation and amplification interferences. However, there is currently a lack of consensus on how best to evaluate and interpret human fecal source identification qPCR experiments. This is, in part, due to the lack of standardized protocols and information on interlaboratory variability under conditions for data acceptance. The aim of this study is to provide users and reviewers with a complete series of conditions for data acceptance derived from a multiple laboratory data set using standardized procedures. To establish these benchmarks, data from HF183/BacR287 and HumM2 human-associated qPCR methods were generated across 14 laboratories. Each laboratory followed a standardized protocol utilizing the same lot of reference DNA materials, DNA isolation kits, amplification reagents, and test samples to generate comparable data. After removal of outliers, a nested analysis of variance (ANOVA) was used to establish proficiency metrics that include lab-to-lab, replicate testing within a lab, and random error for amplification inhibition and sample processing controls. Other data acceptance measurements included extraneous DNA contamination assessments (no-template and extraction blank controls) and calibration model performance (correlation coefficient, amplification efficiency, and lower limit of quantification). To demonstrate the implementation of the proposed standardized protocols and data acceptance criteria, comparable data from two additional laboratories were reviewed. The data acceptance criteria

  16. Acceptance criteria for the evaluation of Category 1 fuel cycle facility physical security plans

    SciTech Connect

    Dwyer, P.A.

    1991-10-01

    This NUREG document presents criteria developed from US Nuclear Regulatory Commission regulations for the evaluation of physical security plans submitted by Category 1 fuel facility licensees. Category 1 refers to those licensees who use or possess a formula quantity of strategic special nuclear material.

  17. Criteria for cesium capsules to be shipped as special form radioactive material

    SciTech Connect

    Lundeen, J.E.

    1994-10-01

    The purpose of this report is to compile all the documentation which defines the criteria for Waste Encapsulation and Storage Facility (WESF) cesium capsules at the IOTECH facility and Applied Radiant Energy Corporation (ARECO) to be shipped as special form radioactive material in the Beneficial Uses Shipping System (BUSS) Cask. The capsules were originally approved as special form in 1975, but in 1988 the integrity of the capsules came into question. WHC developed the Pre-shipment Acceptance Test Criteria for capsules to meet in order to be shipped as special form material. The Department of Energy approved the criteria and directed WHC to ship the capsules at IOTECH and ARECO meeting this criteria to WHC as special form material.

  18. Preliminary waste acceptance criteria for the ICPP spent fuel and waste management technology development program

    SciTech Connect

    Taylor, L.L.; Shikashio, R.

    1993-09-01

    The purpose of this document is to identify requirements to be met by the Producer/Shipper of Spent Nuclear Fuel/High-LeveL Waste SNF/HLW in order for DOE to be able to accept the packaged materials. This includes defining both standard and nonstandard waste forms.

  19. Evaluation criteria for commercially oriented materials processing in space proposals

    NASA Technical Reports Server (NTRS)

    Moore, W. F.; Mcdowell, J. R.

    1979-01-01

    An approach and criteria for evaluating NASA funded experiments and demonstrations which have commercial potential were developed. Methods for insuring quick initial screening of commercial proposals are presented. Recommendations are given for modifying the current evaluation approach. New criteria for evaluating commercially orientated materials processing in space (MPS) proposals are introduced. The process for selection of qualified individuals to evaluate the phases of this approach and criteria is considered and guidelines are set for its implementation.

  20. Methods for verifying compliance with low-level radioactive waste acceptance criteria

    SciTech Connect

    1993-09-01

    This report summarizes the methods that are currently employed and those that can be used to verify compliance with low-level radioactive waste (LLW) disposal facility waste acceptance criteria (WAC). This report presents the applicable regulations representing the Federal, State, and site-specific criteria for accepting LLW. Typical LLW generators are summarized, along with descriptions of their waste streams and final waste forms. General procedures and methods used by the LLW generators to verify compliance with the disposal facility WAC are presented. The report was written to provide an understanding of how a regulator could verify compliance with a LLW disposal facility`s WAC. A comprehensive study of the methodology used to verify waste generator compliance with the disposal facility WAC is presented in this report. The study involved compiling the relevant regulations to define the WAC, reviewing regulatory agency inspection programs, and summarizing waste verification technology and equipment. The results of the study indicate that waste generators conduct verification programs that include packaging, classification, characterization, and stabilization elements. The current LLW disposal facilities perform waste verification steps on incoming shipments. A model inspection and verification program, which includes an emphasis on the generator`s waste application documentation of their waste verification program, is recommended. The disposal facility verification procedures primarily involve the use of portable radiological survey instrumentation. The actual verification of generator compliance to the LLW disposal facility WAC is performed through a combination of incoming shipment checks and generator site audits.

  1. Initial Acceptance Criteria Concepts and Data for Assessing Longevity of Low-Voltage Cable Insulations and Jackets

    SciTech Connect

    Gary toman

    2005-03-30

    This report establishes a basis for acceptance criteria, provides a method for estimating remaining low-voltage cable life, and provides aging profiles under various thermal and radiation conditions for available cable polymer condition-monitoring techniques. This report is not meant to be the final comprehensive source of acceptance criteria, but rather is intended for trial usage so that it can be further refined for easier reference in the future.

  2. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION... acceptance criteria must I have for my finished PET drug products? (a) Specifications. You must establish specifications for each PET drug product, including criteria for determining identity, strength, quality,...

  3. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION... What controls and acceptance criteria must I have for my finished PET drug products? (a) Specifications. You must establish specifications for each PET drug product, including criteria for...

  4. Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant

    SciTech Connect

    Washington TRU Solutions LLC

    2005-12-29

    The purpose of this document is to summarize the waste acceptance criteria applicable to the transportation, storage, and disposal of contact-handled transuranic (CH-TRU) waste at the Waste Isolation Pilot Plant (WIPP). These criteria serve as the U.S. Department of Energy's (DOE) primary directive for ensuring that CH-TRU waste is managed and disposed of in a manner that protects human health and safety and the environment.The authorization basis of WIPP for the disposal of CH-TRU waste includes the U.S.Department of Energy National Security and Military Applications of Nuclear EnergyAuthorization Act of 1980 (reference 1) and the WIPP Land Withdrawal Act (LWA;reference 2). Included in this document are the requirements and associated criteriaimposed by these acts and the Resource Conservation and Recovery Act (RCRA,reference 3), as amended, on the CH-TRU waste destined for disposal at WIPP.|The DOE TRU waste sites must certify CH-TRU waste payload containers to thecontact-handled waste acceptance criteria (CH-WAC) identified in this document. Asshown in figure 1.0, the flow-down of applicable requirements to the CH-WAC istraceable to several higher-tier documents, including the WIPP operational safetyrequirements derived from the WIPP CH Documented Safety Analysis (CH-DSA;reference 4), the transportation requirements for CH-TRU wastes derived from theTransuranic Package Transporter-Model II (TRUPACT-II) and HalfPACT Certificates ofCompliance (references 5 and 5a), the WIPP LWA (reference 2), the WIPP HazardousWaste Facility Permit (reference 6), and the U.S. Environmental Protection Agency(EPA) Compliance Certification Decision and approval for PCB disposal (references 7,34, 35, 36, and 37). The solid arrows shown in figure 1.0 represent the flow-down of allapplicable payload container-based requirements. The two dotted arrows shown infigure 1.0 represent the flow-down of summary level requirements only; i.e., the sitesmust reference the regulatory source

  5. Proliferation resistance criteria for fissile material disposition issues

    SciTech Connect

    Rutherford, D.A.; Fearey, B.L.; Markin, J.T.; Close, D.A.; Tolk, K.M.; Mangan, D.L.; Moore, L.

    1995-09-01

    The 1994 National Acdaemy of Sciences study ``Management and Disposition of Excess Weapons Plutonium`` defined options for reducing the national and international proliferation risks of materials declared excess to the nuclear weapons program. This paper proposes criteria for assessing the proliferation resistance of these options as well defining the ``Standards`` from the report. The criteria are general, encompassing all stages of the disposition process from storage through intermediate processing to final disposition including the facilities, processing technologies and materials, the level of safeguards for these materials, and the national/subnational threat to the materials.

  6. Radioactive waste management: review on clearance levels and acceptance criteria legislation, requirements and standards.

    PubMed

    Maringer, F J; Suráň, J; Kovář, P; Chauvenet, B; Peyres, V; García-Toraño, E; Cozzella, M L; De Felice, P; Vodenik, B; Hult, M; Rosengård, U; Merimaa, M; Szücs, L; Jeffery, C; Dean, J C J; Tymiński, Z; Arnold, D; Hinca, R; Mirescu, G

    2013-11-01

    In 2011 the joint research project Metrology for Radioactive Waste Management (MetroRWM)(1) of the European Metrology Research Programme (EMRP) started with a total duration of three years. Within this project, new metrological resources for the assessment of radioactive waste, including their calibration with new reference materials traceable to national standards will be developed. This paper gives a review on national, European and international strategies as basis for science-based metrological requirements in clearance and acceptance of radioactive waste.

  7. Proposed GTA welding specification and acceptance criteria for the MC4163

    SciTech Connect

    Kwiatkowski, J.J.

    1991-04-12

    This specification documents the gas tungsten arc (GTA) welding process and production weld acceptance criteria requirements for the MC4163. This document is written specifically to apply to the welds on the MC4163 and is not to be used as a general gas tungsten arc welding specification. All sections of this specification must be complied with unless specifically exempted in writing. There are a total of five welds with three different joint designs required to fabricate the MC4163. In the order of fabrication they are (1) initiator closure disc, (2) nozzle to case girth welds, two and, (3) nozzle closure disc welds, two. This specification will only address the nozzle to case girth welds and the nozzle closure disc welds.

  8. CHARACTERIZATION OF TANK 50 SLURRY FOR SALTSTONE WASTE ACCEPTANCE CRITERIA, APRIL 2007 SAMPLES

    SciTech Connect

    Zeigler, K; Ned Bibler, N; David Diprete, D

    2007-12-07

    This report summarizes the results from the characterization of the second quarter April 2007 sampling of Tank 50H for the Saltstone Waste Acceptance Criteria (WAC). Six one liter samples were taken in polyethylene bottles to analyze for the WAC contaminants and a 200 mL sample was taken in a steel container for analysis of volatile organic compounds. The information from this characterization will be given to Waste Solidification Engineering personnel to qualify the transfer of aqueous waste to the Saltstone Facility. The following conclusions are drawn from the analytical results found in this report: (1) All six of the one liter samples taken in April 2007 from the mixed slurry in Tank 50 have the same compositions within the experimental uncertainty of the analyses. (2) Of the ninety-one process, chemical, and radioactive WAC target or limit contaminants listed in Revision 7 of the 'Waste Acceptance Criteria for Aqueous Waste sent to the Z-Area Saltstone Production Facility', eighty-nine had concentrations that were unequivocally less than the WAC limit or target. (3) The two contaminants whose concentrations could not be shown to be less than their WAC targets were methanol and radioactive Nb-93m. Currently the AD Section of SRNL does not have a method for measuring methanol in caustic solutions. For Nb-93m the results are ambiguous due to possible interferences in the ICP-MS analysis from Zr-93 or Mo-93. (4) Of the six additional chemical and radioactive contaminants requested in the TTR for Saltstone qualification, five were measured or calculated. These were Sb, Be, Tl, along with total beta and gamma. The AD Section does not have a method to measure the 6th contaminant which was the cyanide ion.

  9. Heat exchanger staybolt acceptance criteria. Task number: 90-058-1

    SciTech Connect

    Lam, P.S.; Sindelar, R.L.; Barnes, D.M.

    1992-02-01

    The structural integrity demonstration of the primary coolant piping system includes evaluating the structural capacity of each component against a large break or equivalent Double-Ended Guillotine Break. A large break at the inlet or outlet heads of the heat exchangers would occur if the restraint members of the heads become inactive. The structural integrity of the heads is demonstrated by showing the redundant capacity of the staybolts to restrain the head at design conditions and under seismic loadings. The Savannah River Site heat exchanger head is attached to the tubesheet by 84 staybolts. Access to the staybolts is limited due to a welded seal cap over the staybolts. An ultrasonic testing (UT) inspection technique to provide an in-situ examination of the staybolts has recently been developed at SRS. Examination of the staybolts will be performed to ensure their service condition and configuration is within acceptance limits. An acceptance criteria methodology has been developed to disposition flaws reported in the staybolt inspections while ensuring adequate restraint capacity of the staybolts to maintain integrity of the heat exchanger heads against collapse. The methodology includes an approach for the baseline and periodic inspections of the staybolts. The heat exchanger head is analyzed with a three-dimensional finite element model. The restraint provided by the staybolts is evaluated for several postulated cases of inactive or missing staybolts. Evaluation of specific, inactive staybolt configurations based on the UT results can be performed with the finite element model and fracture methodology in this report.

  10. A Study of Failure Criteria of Fibrous Composite Materials

    NASA Technical Reports Server (NTRS)

    Paris, Federico; Jackson, Karen E. (Technical Monitor)

    2001-01-01

    The research described in this paper is focused on two areas: (1) evaluation of existing composite failure criteria in the nonlinear, explicit transient dynamic finite element code, MSC.Dytran, and (2) exploration of the possibilities for modification of material and failure models to account for large deformations, progressive failure, and interaction of damage accumulation with stress/strain response of laminated composites. Following a review of the MSC.Dytran user manual, a bibliographical review of existing failure criteria of composites was performed. The papers considered most interesting for the objective of this report are discussed in section 2. The failure criteria included in the code under consideration are discussed in section 3. A critical summary of the present procedures to perform analysis and design of composites is presented in section 4. A study of the most important historical failure criteria for fibrous composite materials and some of the more recent modifications proposed were studied. The result of this analysis highlighted inadequacies in the existing failure criteria and the need to perform some numerical analyses to elucidate the answer to questions on which some of the proposed criteria are based. A summary of these ideas, which is a proposal of studies to be developed, is presented in section 5. Finally, some ideas for future developments are summarized in section 6.

  11. Materials disposition plutonium acceptance specifications for the immobilization project

    SciTech Connect

    Ebbinghaus, B; Edmunds, T A; Gray, L; Riley, D C; Vankonynenburg, R A

    1998-06-15

    The Department of Energy (DOE) has declared approximately 38.2 tonnes of weapons-grade plutonium to be excess to the needs of national security, 14.3 tonnes of fuel- and reactor-grade plutonium excess to DOE needs, and anticipates an additional 7 tonnes to be declared excess to national security needs. Of this 59.5 tonnes, DOE anticipates that ~ 7.5 tonnes will be dispositioned as spent fuel at the Geologic Repository and ~ 2 tonnes will be declared below the safeguards termination limit and be discarded as TRU waste at WIPP. The remaining 50 tonnes of excess plutonium exists in many forms and locations around the country, and is under the control of several DOE Offices. The Materials Disposition Program (MD) will be receiving materials packaged by these other Programs to disposition in a manor that meets the "spent fuel standard." For disposition by immobilization, the planned facilities will have only limited capabilities to remove impurities prior to blending the plutonium feedstocks to prepare feed for the plutonium immobilization ceramic formation process, Technical specifications are described here that allow potential feedstocks to be categorized as either acceptable for transfer into the MD Immobilization Process, or unacceptable without additional processing prior to transfer to MD. Understanding the requirements should allow cost benefit analyses to be performed to determine if a specific material should be processed sufficiently shipment to WIPP. Preliminary analyses suggest that about 45 tonnes of this material have impurity concentrations much lower than the immobilization acceptance specifications. In addition, approximately another 3 tonnes can easily be blended with the higher purity feeds to meet the immobilization specifications. Another 1 tonne or so can be processed in the immobilization plutonium conversion area to yield materials that can be blended to provide acceptable feed for immobilization. The remaining 3 tonnes must be excluded in their

  12. Characterization of Tank 23H Supernate Per Saltstone Waste Acceptance Criteria Analysis Requirements -2005

    SciTech Connect

    Oji, L

    2005-05-05

    Variable depth Tank 23H samples (22-inch sample [HTF-014] and 185-inch sample [HTF-013]) were pulled from Tank 23H in February, 2005 for characterization. The characterization of the Tank 23H low activity waste is part of the overall liquid waste processing activities. This characterization examined the species identified in the Saltstone Waste Acceptance Criteria (WAC) for the transfer of waste into the Salt-Feed Tank (SFT). The samples were delivered to the Savannah River National Laboratory (SRNL) and analyzed. Apart from radium-226 with an average measured detection limit of < 2.64E+03 pCi/mL, which is about the same order of magnitude as the WAC limit (< 8.73E+03 pCi/mL), none of the species analyzed was found to approach the limits provided in the Saltstone WAC. The concentration of most of the species analyzed for the Tank 23H samples were 2-5 orders of magnitude lower than the WAC limits. The achievable detection limits for a number of the analytes were several orders of magnitude lower than the WAC limits, but one or two orders of magnitude higher than the requested detection limits. Analytes which fell into this category included plutonium-241, europium-154/155, antimony-125, tin-126, ruthenium/rhodium-106, selenium-79, nickel-59/63, ammonium ion, copper, total nickel, manganese and total organic carbon.

  13. Characterization of Tank 23H Supernate Per Saltstone Waste Acceptance Criteria Analysis Requirements-2005

    SciTech Connect

    Oji, L

    2005-06-01

    Variable depth Tank 23H samples (22-inch sample [HTF-014] and 185-inch sample [HTF-013]) were pulled from Tank 23H in February, 2005 for characterization. The characterization of the Tank 23H low activity waste is part of the overall liquid waste processing activities. This characterization examined the species identified in the Saltstone Waste Acceptance Criteria (WAC) for the transfer of waste into the Salt-Feed Tank (SFT). The samples were delivered to the Savannah River National Laboratory (SRNL) and analyzed. Apart from radium-226 with an average measured detection limit of < 2.64E+03 pCi/mL, which is about the same order of magnitude as the WAC limit (< 8.73E+03 pCi/mL), none of the species analyzed was found to approach the limits provided in the Saltstone WAC. The concentration of most of the species analyzed for the Tank 23H samples were 2-5 orders of magnitude lower than the WAC limits. The achievable detection limits for a number of the analytes were several orders of magnitude lower than the WAC limits, but one or two orders of magnitude higher than the requested detection limits. Analytes which fell into this category included plutonium-241, europium-154/155, antimony-125, tin-126, ruthenium/rhodium-106, selenium-79, nickel-59/63, ammonium ion, copper, total nickel, manganese and total organic carbon.

  14. Development of flaw acceptance criteria for aging management of spent nuclear fuel multiple-purpose canisters

    SciTech Connect

    Lam, P.; Sindelar, R.

    2015-03-09

    A typical multipurpose canister (MPC) is made of austenitic stainless steel and is loaded with spent nuclear fuel assemblies. The canister may be subject to service-induced degradation when it is exposed to aggressive atmospheric environments during a possibly long-term storage period if the permanent repository is yet to be identified and readied. Because heat treatment for stress relief is not required for the construction of an MPC, stress corrosion cracking may be initiated on the canister surface in the welds or in the heat affected zone. An acceptance criteria methodology is being developed for flaw disposition should the crack-like defects be detected by periodic In-service Inspection. The first-order instability flaw sizes has been determined with bounding flaw configurations, that is, through-wall axial or circumferential cracks, and part-through-wall long axial flaw or 360° circumferential crack. The procedure recommended by the American Petroleum Institute (API) 579 Fitness-for-Service code (Second Edition) is used to estimate the instability crack length or depth by implementing the failure assessment diagram (FAD) methodology. The welding residual stresses are mostly unknown and are therefore estimated with the API 579 procedure. It is demonstrated in this paper that the residual stress has significant impact on the instability length or depth of the crack. The findings will limit the applicability of the flaw tolerance obtained from limit load approach where residual stress is ignored and only ligament yielding is considered.

  15. Development of flaw acceptance criteria for aging management of spent nuclear fuel multi-purpose canisters

    SciTech Connect

    Lam, Poh -Sang; Sindelar, Robert L.

    2015-03-09

    A typical multipurpose canister (MPC) is made of austenitic stainless steel and is loaded with spent nuclear fuel assemblies. The canister may be subject to service-induced degradation when it is exposed to aggressive atmospheric environments during a possibly long-term storage period if the permanent repository is yet to be identified and readied. Because heat treatment for stress relief is not required for the construction of an MPC, stress corrosion cracking may be initiated on the canister surface in the welds or in the heat affected zone. An acceptance criteria methodology is being developed for flaw disposition should the crack-like defects be detected by periodic in-service Inspection. The first-order instability flaw sizes has been determined with bounding flaw configurations, that is, through-wall axial or circumferential cracks, and part-through-wall long axial flaw or 360° circumferential crack. The procedure recommended by the American Petroleum Institute (API) 579 Fitness-for-Service code (Second Edition) is used to estimate the instability crack length or depth by implementing the failure assessment diagram (FAD) methodology. The welding residual stresses are mostly unknown and are therefore estimated with the API 579 procedure. It is demonstrated in this paper that the residual stress has significant impact on the instability length or depth of the crack. The findings will limit the applicability of the flaw tolerance obtained from limit load approach where residual stress is ignored and only ligament yielding is considered.

  16. 21 CFR 211.122 - Materials examination and usage criteria.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Materials examination and usage criteria. 211.122 Section 211.122 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Packaging...

  17. 21 CFR 211.122 - Materials examination and usage criteria.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Materials examination and usage criteria. 211.122 Section 211.122 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Packaging...

  18. 21 CFR 211.122 - Materials examination and usage criteria.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Materials examination and usage criteria. 211.122 Section 211.122 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Packaging...

  19. 21 CFR 211.122 - Materials examination and usage criteria.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Materials examination and usage criteria. 211.122 Section 211.122 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Packaging...

  20. 21 CFR 211.122 - Materials examination and usage criteria.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Materials examination and usage criteria. 211.122 Section 211.122 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Packaging...

  1. Type of Speech Material Affects Acceptable Noise Level Test Outcome

    PubMed Central

    Koch, Xaver; Dingemanse, Gertjan; Goedegebure, André; Janse, Esther

    2016-01-01

    The acceptable noise level (ANL) test, in which individuals indicate what level of noise they are willing to put up with while following speech, has been used to guide hearing aid fitting decisions and has been found to relate to prospective hearing aid use. Unlike objective measures of speech perception ability, ANL outcome is not related to individual hearing loss or age, but rather reflects an individual’s inherent acceptance of competing noise while listening to speech. As such, the measure may predict aspects of hearing aid success. Crucially, however, recent studies have questioned its repeatability (test–retest reliability). The first question for this study was whether the inconsistent results regarding the repeatability of the ANL test may be due to differences in speech material types used in previous studies. Second, it is unclear whether meaningfulness and semantic coherence of the speech modify ANL outcome. To investigate these questions, we compared ANLs obtained with three types of materials: the International Speech Test Signal (ISTS), which is non-meaningful and semantically non-coherent by definition, passages consisting of concatenated meaningful standard audiology sentences, and longer fragments taken from conversational speech. We included conversational speech as this type of speech material is most representative of everyday listening. Additionally, we investigated whether ANL outcomes, obtained with these three different speech materials, were associated with self-reported limitations due to hearing problems and listening effort in everyday life, as assessed by a questionnaire. ANL data were collected for 57 relatively good-hearing adult participants with an age range representative for hearing aid users. Results showed that meaningfulness, but not semantic coherence of the speech material affected ANL. Less noise was accepted for the non-meaningful ISTS signal than for the meaningful speech materials. ANL repeatability was comparable

  2. Structural acceptance criteria for the evaulation of existing double-shell waste storage tanks located at the Hanford site, Richland, Washington

    SciTech Connect

    Julyk, L.J.; Day, A.D.; Dyrness, A.D.; Moore, C.J.; Peterson, W.S.; Scott, M.A.; Shrivastava, H.P.; Sholman, J.S.; Watts, T.N.

    1995-09-01

    The structural acceptance criteria contained herein for the evaluation of existing underground double-shell waste storage tanks located at the Hanford Site is part of the Life Management/Aging Management Program of the Tank Waste Remediation System. The purpose of the overall life management program is to ensure that confinement of the waste is maintained over the required service life of the tanks. Characterization of the present condition of the tanks, understanding and characterization of potential degradation mechanisms, and development of tank structural acceptance criteria based on previous service and projected use are prerequisites to assessing tank integrity, to projecting the length of tank service, and to developing and applying prudent fixes or repairs. The criteria provided herein summarize the requirements for the analysis and structural qualification of the existing double-shell tanks for continued operation. Code reconciliation issues and material degradation under aging conditions are addressed. Although the criteria were developed for double-shell tanks, many of the provisions are equally applicable to single-shell tanks. However, the criteria do not apply to the evaluation of tank appurtenances and buried piping.

  3. 32 CFR 37.530 - What criteria do I use in deciding whether to accept a recipient's cost sharing?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-Award Business Evaluation Cost Sharing § 37.530 What criteria do I use in deciding whether to accept a... commitment to the success of the research project. Cash contributions clearly demonstrate commitment and they... accomplishment of the research project's objectives. (c) They are costs that may be charged to the project...

  4. 32 CFR 37.530 - What criteria do I use in deciding whether to accept a recipient's cost sharing?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Award Business Evaluation Cost Sharing § 37.530 What criteria do I use in deciding whether to accept a... commitment to the success of the research project. Cash contributions clearly demonstrate commitment and they... accomplishment of the research project's objectives. (c) They are costs that may be charged to the project...

  5. 32 CFR 37.530 - What criteria do I use in deciding whether to accept a recipient's cost sharing?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... and development (IR&D) costs, as described at 32 CFR 34.13(a)(5)(ii), that meet all of the criteria in paragraphs (a) through (e) of this section. IR&D is acceptable as cost sharing, even though it may be... principles at 48 CFR part 31 allow a for-profit firm that has expenditure-based, Federal...

  6. 32 CFR 37.530 - What criteria do I use in deciding whether to accept a recipient's cost sharing?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... and development (IR&D) costs, as described at 32 CFR 34.13(a)(5)(ii), that meet all of the criteria in paragraphs (a) through (e) of this section. IR&D is acceptable as cost sharing, even though it may be... principles at 48 CFR part 31 allow a for-profit firm that has expenditure-based, Federal...

  7. 32 CFR 37.530 - What criteria do I use in deciding whether to accept a recipient's cost sharing?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... and development (IR&D) costs, as described at 32 CFR 34.13(a)(5)(ii), that meet all of the criteria in paragraphs (a) through (e) of this section. IR&D is acceptable as cost sharing, even though it may be... principles at 48 CFR part 31 allow a for-profit firm that has expenditure-based, Federal...

  8. 10 CFR 50.46 - Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... light-water nuclear power reactors. 50.46 Section 50.46 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC... Approvals § 50.46 Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors. (a)(1)(i) Each boiling or pressurized light-water nuclear power reactor fueled with uranium...

  9. 10 CFR 50.46 - Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... light-water nuclear power reactors. 50.46 Section 50.46 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC... Approvals § 50.46 Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors. (a)(1)(i) Each boiling or pressurized light-water nuclear power reactor fueled with uranium...

  10. 10 CFR 50.46 - Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... light-water nuclear power reactors. 50.46 Section 50.46 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC... Approvals § 50.46 Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors. (a)(1)(i) Each boiling or pressurized light-water nuclear power reactor fueled with uranium...

  11. 10 CFR 50.46 - Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... light-water nuclear power reactors. 50.46 Section 50.46 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC... Approvals § 50.46 Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors. (a)(1)(i) Each boiling or pressurized light-water nuclear power reactor fueled with uranium...

  12. 10 CFR 50.46 - Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... light-water nuclear power reactors. 50.46 Section 50.46 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC... Approvals § 50.46 Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors. (a)(1)(i) Each boiling or pressurized light-water nuclear power reactor fueled with uranium...

  13. Criteria for Determination of Material Control and Accountability System Effectiveness

    SciTech Connect

    John Wright

    2008-03-01

    The Nevada Test Site (NTS) is a test bed for implementation of the Safeguards First Principles Initiative (SFPI), a risk-based approach to Material Control & Accountability (MC&A) requirements. The Comprehensive Assessment of Safeguards Strategies (COMPASS) model is used to determine the effectiveness of MC&A systems under SFPI. Under this model, MC&A is divided into nine primary elements. Each element is divided into sub-elements. Then each sub-element is assigned two values, effectiveness and contribution, that are used to calculate the rating. Effectiveness is a measure of subelement implementation and how well it meets requirements. Contribution is a relative measure of the importance, and functions as a weighting factor. The COMPASS model provides the methodology for calculation of sub-element and element ratings, but not the actual criteria. Each site must develop its own criteria. For the rating to be meaningful, the effectiveness criteria must be objective and based on explicit, measurable criteria. Contribution (weights) must reflect the importance within the MC&A program. This paper details the NTS approach to system effectiveness and contribution values, and will cover the following: the basis for the ratings, an explanation of the contribution “weights,” and the objective, performance based effectiveness criteria. Finally, the evaluation process will be described.

  14. Criteria for clinical translucency evaluation of direct esthetic restorative materials

    PubMed Central

    2016-01-01

    The purpose of this review was to suggest practical criteria for the clinical translucency evaluation of direct esthetic restorative materials, and to review the translucency with these criteria. For the evaluation of reported translucency values, measuring instrument and method, specimen thickness, background color, and illumination should be scrutinized. Translucency parameter (TP) of 15 to 19 could be regarded as the translucency of 1 mm thick human enamel. Visual perceptibility threshold for translucency difference in contrast ratio (ΔCR) of 0.07 could be transformed into ΔTP value of 2. Translucency differences between direct and indirect resin composites were perceivable (ΔTP > 2). Universal and corresponding flowable resin composites did not show perceivable translucency differences in most products. Translucency differed significantly by the product within each shade group, and by the shade group within each product. Translucency of human enamel and perceptibility threshold for translucency difference may be used as criteria for the clinical evaluation of translucency of esthetic restorative materials. PMID:27508156

  15. Criteria for clinical translucency evaluation of direct esthetic restorative materials.

    PubMed

    Lee, Yong-Keun

    2016-08-01

    The purpose of this review was to suggest practical criteria for the clinical translucency evaluation of direct esthetic restorative materials, and to review the translucency with these criteria. For the evaluation of reported translucency values, measuring instrument and method, specimen thickness, background color, and illumination should be scrutinized. Translucency parameter (TP) of 15 to 19 could be regarded as the translucency of 1 mm thick human enamel. Visual perceptibility threshold for translucency difference in contrast ratio (ΔCR) of 0.07 could be transformed into ΔTP value of 2. Translucency differences between direct and indirect resin composites were perceivable (ΔTP > 2). Universal and corresponding flowable resin composites did not show perceivable translucency differences in most products. Translucency differed significantly by the product within each shade group, and by the shade group within each product. Translucency of human enamel and perceptibility threshold for translucency difference may be used as criteria for the clinical evaluation of translucency of esthetic restorative materials. PMID:27508156

  16. The U.S. Nuclear Regulatory Commission's Strategy for Revising the RIA Acceptance Criteria

    SciTech Connect

    Clifford, Paul M.

    2007-07-01

    The U.S. Nuclear Regulatory Commission (NRC) has issued interim criteria and guidance for the reactivity-initiated accident (RIA) within the latest revision to NUREG-0800, 'Standard Review Plan' (SRP), Section 4.2, 'Fuel System Design', Appendix B (Revision 03, March 2007). The purpose of this paper is as follows: 1. present a change in regulatory staff position regarding the requirements of 10 CFR 50, Appendix A, General Design Criteria 28 (GDC28) and changes in regulatory guidance provided in Regulatory Guide (RG) 1.77, RG 1.195, RG 1.183, and previous versions of NUREG-0800 SRP; 2. describe the implementation strategy and schedule for both new reactors and the existing fleet; and 3. encourage licensees and nuclear fuel vendors to (1) develop improved core physics analytical methods to allow a more deliberate transition to the new fuel cladding failure criteria and (2) develop the technical basis to address the new core coolability criteria. (authors)

  17. 7 CFR 1717.605 - Design standards, plans and specifications, construction standards, and RUS accepted materials.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., construction standards, and RUS accepted materials. 1717.605 Section 1717.605 Agriculture Regulations of the... standards, plans and specifications, construction standards, and RUS accepted materials. All borrowers... system design, construction standards, and the use of RUS accepted materials. Borrowers must comply...

  18. Fatigue acceptance test limit criteria for larger diameter rolled thread fasteners

    SciTech Connect

    Kephart, A.R.

    1999-05-19

    This document describes a fatigue lifetime acceptance test criterion by which studs having rolled threads, larger than 1.0 inches (25 mm) in diameter, can be assured to meet minimum quality attributes associated with a controlled rolling process.

  19. A FRAMEWORK TO DEVELOP FLAW ACCEPTANCE CRITERIA FOR STRUCTURAL INTEGRITY ASSESSMENT OF MULTIPURPOSE CANISTERS FOR EXTENDED STORAGE OF USED NUCLEAR FUEL

    SciTech Connect

    Lam, P.; Sindelar, R.; Duncan, A.; Adams, T.

    2014-04-07

    A multipurpose canister (MPC) made of austenitic stainless steel is loaded with used nuclear fuel assemblies and is part of the transfer cask system to move the fuel from the spent fuel pool to prepare for storage, and is part of the storage cask system for on-site dry storage. This weld-sealed canister is also expected to be part of the transportation package following storage. The canister may be subject to service-induced degradation especially if exposed to aggressive environments during possible very long-term storage period if the permanent repository is yet to be identified and readied. Stress corrosion cracking may be initiated on the canister surface in the welds or in the heat affected zone because the construction of MPC does not require heat treatment for stress relief. An acceptance criteria methodology is being developed for flaw disposition should the crack-like defects be detected by periodic Inservice Inspection. The external loading cases include thermal accident scenarios and cask drop conditions with the contribution from the welding residual stresses. The determination of acceptable flaw size is based on the procedure to evaluate flaw stability provided by American Petroleum Institute (API) 579 Fitness-for-Service (Second Edition). The material mechanical and fracture properties for base and weld metals and the stress analysis results are obtained from the open literature such as NUREG-1864. Subcritical crack growth from stress corrosion cracking (SCC), and its impact on inspection intervals and acceptance criteria, is not addressed.

  20. 76 FR 27925 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-13

    .... Earl Libby, Office of New Reactors, U.S. Nuclear Regulatory Commission, Washington DC 20555-0001...) part 52, ``Licenses, Certifications, and Approvals for Nuclear Power Plants,'' on April 18, 1989 (54 FR..., ``Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants,'' to prepare and...

  1. How strict should specimen acceptance or rejection criteria be for diagnostic semen analysis? An opinion.

    PubMed

    Woodward, Bryan J; Tomlinson, Mathew J

    2015-06-01

    Medical laboratory accreditation (previously by Clinical Pathology Accreditation UK Ltd and now by the United Kingdom Accreditation Service) has been integral to improving standards and service quality in the UK. With the recent introduction of the ISO15189 standard, all laboratories offering a clinical diagnostic service are required to demonstrate further improvement, with more emphasis on validation and assessment of the uncertainty levels associated with testing. This applies not only to 'bench testing', but also to the evidence-base for all pre-analytical and post-analytical procedures. To reduce the risk of external influences on andrology test results, semen sample rejection criteria were developed, including confirmation of patient identity, a strict time limit from sample production to testing, the use of toxicity-tested containers, a prescribed sexual abstinence and a need for complete sample collection. However, such criteria were originally developed by the World Health Organization in order to standardise analysis rather than reject testing outright, and should therefore be implemented with caution. Rejecting samples with normal semen parameters because they fail to meet some of the criteria as outlined above would be a waste of resources and adversely affect user (the person who requested or provided the sample) satisfaction. This document evaluates the evidence base underlying commonly used criteria for specimen rejection and suggests how they may be applied more pragmatically in order to improve efficiency and reduce the waste of resources.

  2. How strict should specimen acceptance or rejection criteria be for diagnostic semen analysis? An opinion.

    PubMed

    Woodward, Bryan J; Tomlinson, Mathew J

    2015-06-01

    Medical laboratory accreditation (previously by Clinical Pathology Accreditation UK Ltd and now by the United Kingdom Accreditation Service) has been integral to improving standards and service quality in the UK. With the recent introduction of the ISO15189 standard, all laboratories offering a clinical diagnostic service are required to demonstrate further improvement, with more emphasis on validation and assessment of the uncertainty levels associated with testing. This applies not only to 'bench testing', but also to the evidence-base for all pre-analytical and post-analytical procedures. To reduce the risk of external influences on andrology test results, semen sample rejection criteria were developed, including confirmation of patient identity, a strict time limit from sample production to testing, the use of toxicity-tested containers, a prescribed sexual abstinence and a need for complete sample collection. However, such criteria were originally developed by the World Health Organization in order to standardise analysis rather than reject testing outright, and should therefore be implemented with caution. Rejecting samples with normal semen parameters because they fail to meet some of the criteria as outlined above would be a waste of resources and adversely affect user (the person who requested or provided the sample) satisfaction. This document evaluates the evidence base underlying commonly used criteria for specimen rejection and suggests how they may be applied more pragmatically in order to improve efficiency and reduce the waste of resources. PMID:25292458

  3. How do the Properties of Allan Hills 84001 Compare With Accepted Criteria for Evidence of Ancient Life?

    NASA Technical Reports Server (NTRS)

    Gibson, E. K., Jr.; McKay, D. S.; Thomas-Keprta, K.; Westall, F.; Romanek, C. A.

    1998-01-01

    Criteria for Past Life: To be confident that any sample contains evidence of past life or biogenic activity, one must determine beyond a shadow of a doubt that certain well-established features or biomarker signatures are present in the sample. In the case of martian samples, the criteria for past life have not been established because if life existed on the planet, we have no way of knowing its detailed characteristics. Lacking independent evidence about the nature of possible past life on Mars, the scientific community must use, for the time being, the criteria established for ancient samples from the Earth: (1) Do we know the geologic context of the sample? Is it compatible with past life? (2) Do we know the age of the sample and its stratigraphic location? Are they understood enough to relate possible life to geologic history? (3) Does the sample contain evidence of cellular morphology? (4) What structural remains of colonies or communities exist within the samples? (5) Is there any evidence of biominerals showing chemical or mineral disequilibria? (6) Is there any evidence of stable isotope patterns unique to biology? (7) Are there any organic biomarkers present? (8) Are the features indigenous to the sample? For acceptance of past life in a geologic sample, essentially all of these criteria must he met.

  4. Tissue dissociation enzymes for isolating human islets for transplantation: factors to consider in setting enzyme acceptance criteria.

    PubMed

    McCarthy, Robert C; Breite, Andrew G; Green, Michael L; Dwulet, Francis E

    2011-01-27

    Tissue dissociation enzymes are critical reagents that affect the yield and quality of human pancreatic islets required for islet transplantation. The United States Food and Drug Administration's oversight of this procedure recommends laboratories to set acceptance criteria for enzymes used in the manufacture of islet products for transplantation. Currently, many laboratories base this selection on personal experience because biochemical analysis is not predictive of success of the islet isolation procedure. This review identifies the challenges of correlating results from enzyme biochemical analysis to their effectiveness in human islet isolation and suggests a path forward to address these challenges to improve control of the islet manufacturing process.

  5. Strain Gage Selection Criteria for Textile Composite Materials

    NASA Technical Reports Server (NTRS)

    Masters, John E.

    1996-01-01

    This report will provide a review of efforts to establish a set of strain gage selection guidelines for textile reinforced composite materials. A variety of strain gages were evaluated in the study to determine the sensitivity of strain measurements to the size of the strain gage. The strain gages were chosen to provide a range of gage lengths and widths. The gage aspect ratio (the length-to-width ratio) was also varied. The gages were tested on a diverse collection of textile composite laminates. Test specimens featured eleven different textile architectures: four 2-D triaxial braids, six 3-D weaves, and one stitched uniweave architecture. All specimens were loaded in uniaxial tension. The materials' moduli were measured in both the longitudinal (parallel to the O deg. yarns) and the transverse (perpendicular to the O deg. yarns) directions. The results of these measurements were analyzed to establish performance levels for extensometers and strain gages on textile composite materials. Conclusions are expressed in a summary that discusses instrumentation practices and defines strain gage selection criteria.

  6. Performance criteria for reference measurement procedures and reference materials.

    PubMed

    Schimmel, Heinz; Zegers, Ingrid

    2015-05-01

    The concept of metrological traceability of measurement results to property values assigned to measurement standards of higher metrological order or to the International System of Units (SI) through sequential calibrations, using reference materials and reference measurement procedures, plays a key role in ensuring that end user measurement procedures perform at an acceptable level in the clinical context. The aim is that measurement results produced over time or by different end users or with different end user measurement procedures for the same measurand will be equivalent within their corresponding uncertainties. These goals can only be reached under certain conditions and if requirements laid down in international standards on calibration concepts, reference measurement procedures and reference materials are fulfilled. Calibration hierarchies have to be implemented correctly and parameters contributing to measurement uncertainty and systematic bias need to be controlled and eliminated, respectively, by technically improving methods and reference materials and intermediate calibrators used for effectively achieving equivalence of measurement results and for meeting analytical performance requirements for in vitro diagnostic devices.

  7. An analysis of the qualification criteria for small radioactive material shipping packages

    SciTech Connect

    McClure, J.D.

    1983-05-01

    The RAM package design certification process has two important elements, testing and acceptance. These terms sound very similar but they have specific meanings. Qualification testing in the context of this study is the imposition of simulated accident test conditions upon the candidate package design. (Normal transportation environments may also be included.) Following qualification testing, the acceptance criteria provide the performance levels which, if demonstrated, indicate the ability of the RAM package to sustain the severity of the qualification testing sequence and yet maintain specified levels of package integrity. This study has used Severities of Transportation Accidents as a data base to examine the regulatory test criteria which are required to be met by small packages containing Type B quantities of radioactive material (RAM). The basic findings indicate that the present regulatory test standards provide significantly higher levels of protection for the surface transportation modes (truck, rail) than for RAM packages shipped by aircraft. It should also be noted that various risk assessment studies have shown that the risk to the public due to severe transport accidents by surface and air transport modes is very low. A key element in this study was the quantification of the severity of the transportation accident environment and the severity of the present qualification test standards (called qualification test standards in this document) so that a direct comparison could be made between them to assess the effectiveness of the existing qualification test standards. The manner in which this was accomplished is described.

  8. Building Energy Simulation Test for Existing Homes (BESTEST-EX): Instructions for Implementing the Test Procedure, Calibration Test Reference Results, and Example Acceptance-Range Criteria

    SciTech Connect

    Judkoff, R.; Polly, B.; Bianchi, M.; Neymark, J.; Kennedy, M.

    2011-08-01

    This publication summarizes building energy simulation test for existing homes (BESTEST-EX): instructions for implementing the test procedure, calibration tests reference results, and example acceptance-range criteria.

  9. 40 CFR 227.2 - Materials which satisfy the environmental impact criteria of subpart B.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... environmental impact criteria of subpart B. 227.2 Section 227.2 Protection of Environment ENVIRONMENTAL... DUMPING OF MATERIALS General § 227.2 Materials which satisfy the environmental impact criteria of subpart... satisfies the environmental impact criteria set forth in subpart B, a permit for ocean dumping will...

  10. 40 CFR 227.2 - Materials which satisfy the environmental impact criteria of subpart B.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... environmental impact criteria of subpart B. 227.2 Section 227.2 Protection of Environment ENVIRONMENTAL... DUMPING OF MATERIALS General § 227.2 Materials which satisfy the environmental impact criteria of subpart... satisfies the environmental impact criteria set forth in subpart B, a permit for ocean dumping will...

  11. 40 CFR 227.2 - Materials which satisfy the environmental impact criteria of subpart B.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... environmental impact criteria of subpart B. 227.2 Section 227.2 Protection of Environment ENVIRONMENTAL... DUMPING OF MATERIALS General § 227.2 Materials which satisfy the environmental impact criteria of subpart... satisfies the environmental impact criteria set forth in subpart B, a permit for ocean dumping will...

  12. 40 CFR 227.2 - Materials which satisfy the environmental impact criteria of subpart B.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... environmental impact criteria of subpart B. 227.2 Section 227.2 Protection of Environment ENVIRONMENTAL... DUMPING OF MATERIALS General § 227.2 Materials which satisfy the environmental impact criteria of subpart... satisfies the environmental impact criteria set forth in subpart B, a permit for ocean dumping will...

  13. Criteria for acceptance to preprofessional dietetics programs vs desired qualities of professionals: an analysis.

    PubMed

    Moore, K K

    1995-01-01

    The objectives of this analysis were to examine the literature and compare and contrast (a) qualities preferred in preprofessional dietetics students by directors of internships and approved preprofessional practice programs (AP4s), (b) characteristics needed to succeed in a scientific field, (c) traits emphasized by dietetics training programs compared with those most valued by employers, (d) skills needed by high-level managerial dietitians and those in business and communications, and (e) qualities dietitians have aspired to develop for increased competitiveness in the marketplace. Even though the revised Standards of Education have been in place since 1988, recent evaluation of criteria for internship and AP4 admission has shown traditional emphasis on academic performance and the importance of work experience. Success in scientific pursuits has been linked with more than innate intelligence; a drive for success and enthusiasm for learning are also involved. Internships foster mostly technical learning, so development of skills in human and conceptual areas are somewhat lacking. These skills, which have been identified as valuable to employers, need greater development or more consistent identification in the selection and training process. Perhaps serious consideration should be given to applicants for preprofessional programs who have shown leadership qualities through extracurricular activities or who have given themselves the opportunity to develop and improve these skills. Such students might hasten the metamorphosis of dietetics practitioners toward improved levels of compensation and professional fulfillment. PMID:7798584

  14. Criteria for acceptance to preprofessional dietetics programs vs desired qualities of professionals: an analysis.

    PubMed

    Moore, K K

    1995-01-01

    The objectives of this analysis were to examine the literature and compare and contrast (a) qualities preferred in preprofessional dietetics students by directors of internships and approved preprofessional practice programs (AP4s), (b) characteristics needed to succeed in a scientific field, (c) traits emphasized by dietetics training programs compared with those most valued by employers, (d) skills needed by high-level managerial dietitians and those in business and communications, and (e) qualities dietitians have aspired to develop for increased competitiveness in the marketplace. Even though the revised Standards of Education have been in place since 1988, recent evaluation of criteria for internship and AP4 admission has shown traditional emphasis on academic performance and the importance of work experience. Success in scientific pursuits has been linked with more than innate intelligence; a drive for success and enthusiasm for learning are also involved. Internships foster mostly technical learning, so development of skills in human and conceptual areas are somewhat lacking. These skills, which have been identified as valuable to employers, need greater development or more consistent identification in the selection and training process. Perhaps serious consideration should be given to applicants for preprofessional programs who have shown leadership qualities through extracurricular activities or who have given themselves the opportunity to develop and improve these skills. Such students might hasten the metamorphosis of dietetics practitioners toward improved levels of compensation and professional fulfillment.

  15. Acceptance criteria for interim dry storage of aluminum-clad fuels

    SciTech Connect

    Sindelar, R.L.; Peacock, H.B. Jr.; Iyer, N.C.; Louthan, M.R. Jr.

    1994-12-31

    Direct repository disposal of foreign and domestic research reactor fuels owned by the United States Department of Energy is an alternative to reprocessing (together with vitrification of the high level waste and storage in an engineered barrier) for ultimate disposition. Neither the storage systems nor the requirements and specifications for acceptable forms for direct repository disposal have been developed; therefore, an interim storage strategy is needed to safely store these fuels. Dry storage (within identified limits) of the fuels received from wet-basin storage would avoid excessive degradation to assure post-storage handleability, a full range of ultimate disposal options, criticality safety, and provide for maintaining confinement by the fuel/clad system. Dry storage requirements and technologies for US commercial fuels, specifically zircaloy-clad fuels under inert cover gas, are well established. Dry storage requirements and technologies for a system with a design life of 40 years for dry storage of aluminum-clad foreign and domestic research reactor fuels are being developed by various groups within programs sponsored by the DOE.

  16. EU landfill waste acceptance criteria and EU Hazardous Waste Directive compliance testing of incinerated sewage sludge ash.

    PubMed

    Donatello, S; Tyrer, M; Cheeseman, C R

    2010-01-01

    A hazardous waste assessment has been completed on ash samples obtained from seven sewage sludge incinerators operating in the UK, using the methods recommended in the EU Hazardous Waste Directive. Using these methods, the assumed speciation of zinc (Zn) ultimately determines if the samples are hazardous due to ecotoxicity hazard. Leaching test results showed that two of the seven sewage sludge ash samples would require disposal in a hazardous waste landfill because they exceed EU landfill waste acceptance criteria for stabilised non-reactive hazardous waste cells for soluble selenium (Se). Because Zn cannot be proven to exist predominantly as a phosphate or oxide in the ashes, it is recommended they be considered as non-hazardous waste. However leaching test results demonstrate that these ashes cannot be considered as inert waste, and this has significant implications for the management, disposal and re-use of sewage sludge ash.

  17. 46 CFR 164.019-9 - Procedure for acceptance of revisions of design, process, or materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Procedure for acceptance of revisions of design, process... Device Components § 164.019-9 Procedure for acceptance of revisions of design, process, or materials. (a) The manufacturer shall not change the design, material, manufacturing process, or construction of...

  18. Efficient, environmentally acceptable method for waterproofing insulation material

    NASA Technical Reports Server (NTRS)

    Blohowiak, Kay Y. (Inventor); Krienke, Kenneth A. (Inventor); Olli, Larry K. (Inventor); Newquist, Charles W. (Inventor)

    2000-01-01

    A process of waterproofing alumina-rich or silica-rich fibrous thermal insulation material, the process including the steps of: (a) providing an alumina-rich or a silica-rich fibrous material; (b) providing a waterproofing solution including: (1) a carrier solvent selected from the group consisting of aliphatic alcohols having from 1C to 6C, water, and mixtures thereof; and (2) an alkoxysilane defined by the formula R.sub.4-x -Si-(O-R').sub.x where x is 1-3 and R is selected from the group consisting of alkyl groups having from 1C to 10C, hydrogen, or fluorocarbon groups having from 1F to 15F; and where O-R' is an alkoxy group having from 1C to 5C, or a mixture of alkoxysilanes defined by the above formula R.sub.4-x -Si-(O-R').sub.x ; and optionally (3) modifiers including acids, such as acetic acid or nitric acid, or bases, such as ammonium hydroxide, RNH.sub.2, R.sub.2 NH, or R.sub.3 N, or MOH, where R is selected from the group consisting of alkyl groups having from 1C to 10C or hydrogen, and where M=Na, Li, or K; (c) contacting the fibrous material with the waterproofing solution for a sufficient amount of time to waterproof the fibrous material; and (d) curing the coated fibrous material to render it sufficiently waterproof. A chemical solution for waterproofing alumina-rich or silica-rich fibrous thermal insulation materials, the solution including: (a) a carrier solvent selected from the group consisting of aliphatic alcohols having from 1C to 6C, water, and mixtures thereof; and (b) an alkoxysilane defined by the formula R.sub.4-x -Si-(O-R').sub.x where x is 1-3 and R is selected from the group consisting of alkyl groups having from 1C to 10C, hydrogen, or fluorocarbon groups having from 1F to 15F; and where O-R' is an alkoxy group having from 1C to 5C, or a mixture of alkoxysilanes defined by the above formula R.sub.4-x -Si-(O-R').sub.x ; and optionally (c) modifiers including acids, such as acetic acid or nitric acid, or bases, such as ammonium hydroxide

  19. 10 CFR 32.31 - Certain industrial devices containing byproduct material: Safety criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Certain industrial devices containing byproduct material: Safety criteria. 32.31 Section 32.31 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO... Certain industrial devices containing byproduct material: Safety criteria. (a) An applicant for a...

  20. A proposed rationale and test methodology for establishment of acceptance criteria for vacuum integrity testing of pharmaceutical freeze dryers.

    PubMed

    Hardwick, Lisa M; Nail, Steven L; Jarman, James; Hasler, Kai; Hense, Thomas

    2013-10-01

    A scientific rationale is proposed for the establishment of acceptance criteria for leak rates in pharmaceutical freeze dryers. A method was developed to determine the quantity of air that could leak into any lyophilizer from the outside while still maintaining Class 100/Grade A microbial conditions. A lyophilizing product is assumed most vulnerable to microbial contamination during secondary drying, when mass transfer of water vapor from product to condenser is minimal. Using the void volume of the dryer, calculated from change in internal pressure when a known volume of air is introduced, and the potential maximum bioburden of the leaked air (based on measured values), calculations can determine the allowable leaked volume of air, the flow rate required to admit that volume in a given time frame, and the pressure rise that would result from the leak over a given testing period. For the dryers in this study, using worst-case air quality conditions, it was determined that a leak resulting in a pressure rise of 0.027 mbar over a 30 min period would allow the dryers to remain in secondary drying conditions for 62 h before the established action level of one colony forming unit for each cubic meter of air space would be reached.

  1. 46 CFR 164.120-15 - Procedure for acceptance of material change.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Procedure for acceptance of material change. 164.120-15 Section 164.120-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Fire Retardant Resins for Lifeboats...

  2. 46 CFR 164.120-15 - Procedure for acceptance of material change.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for acceptance of material change. 164.120-15 Section 164.120-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Fire Retardant Resins for Lifeboats...

  3. 46 CFR 164.120-15 - Procedure for acceptance of material change.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Procedure for acceptance of material change. 164.120-15 Section 164.120-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Fire Retardant Resins for Lifeboats...

  4. Evaluation of criteria for developing traffic safety materials for Latinos.

    PubMed

    Streit-Kaplan, Erica L; Miara, Christine; Formica, Scott W; Gallagher, Susan Scavo

    2011-03-01

    This quantitative study assessed the validity of guidelines that identified four key characteristics of culturally appropriate Spanish-language traffic safety materials: language, translation, formative evaluation, and credible source material. From a sample of 190, the authors randomly selected 12 Spanish-language educational materials for analysis by 15 experts. Hypotheses included that the experts would rate materials with more of the key characteristics as more effective (likely to affect behavioral change) and rate materials originally developed in Spanish and those that utilized formative evaluation (e.g., pilot tests, focus groups) as more culturally appropriate. Although results revealed a weak association between the number of key characteristics in a material and the rating of its effectiveness, reviewers rated materials originally created in Spanish and those utilizing formative evaluation as significantly more culturally appropriate. The findings and methodology demonstrated important implications for developers and evaluators of any health-related materials for Spanish speakers and other population groups.

  5. Advanced composite structures. [metal matrix composites - structural design criteria for spacecraft construction materials

    NASA Technical Reports Server (NTRS)

    1974-01-01

    A monograph is presented which establishes structural design criteria and recommends practices to ensure the design of sound composite structures, including composite-reinforced metal structures. (It does not discuss design criteria for fiber-glass composites and such advanced composite materials as beryllium wire or sapphire whiskers in a matrix material.) Although the criteria were developed for aircraft applications, they are general enough to be applicable to space vehicles and missiles as well. The monograph covers four broad areas: (1) materials, (2) design, (3) fracture control, and (4) design verification. The materials portion deals with such subjects as material system design, material design levels, and material characterization. The design portion includes panel, shell, and joint design, applied loads, internal loads, design factors, reliability, and maintainability. Fracture control includes such items as stress concentrations, service-life philosophy, and the management plan for control of fracture-related aspects of structural design using composite materials. Design verification discusses ways to prove flightworthiness.

  6. Data Quality Objectives and Criteria for Basic Information, Acceptable Uncertainty, and Quality-Assurance and Quality-Control Documentation

    USGS Publications Warehouse

    Granato, Gregory E.; Bank, Fred G.; Cazenas, Patricia A.

    1998-01-01

    The Federal Highway Administration and State transportation agencies have the responsibility of determining and minimizing the effects of highway runoff on water quality; therefore, they have been conducting an extensive program of water-quality monitoring and research during the last 25 years. The objectives and monitoring goals of highway runoff studies have been diverse, because the highway community must address many different questions about the characteristics and impacts of highway runoff. The Federal Highway Administration must establish that available data and procedures that are used to assess and predict pollutant loadings and impacts from highway stormwater runoff are valid, current, and technically supportable. This report examines criteria for evaluating water-quality data and resultant interpretations. The criteria used to determine if data are valid (useful for intended purposes), current, and technically supportable are derived from published materials from the Federal Highway Administration, the U.S. Environmental Protection Agency, the Intergovernmental Task Force on Monitoring Water Quality, the U.S. Geological Survey and from technical experts throughout the U.S. Geological Survey. Water-quality data that are documented to be meaningful, representative, complete, precise, accurate, comparable, and admissible as legal evidence will meet the scientific, engineering, and regulatory needs of highway agencies. Documentation of basic information, such as compatible monitoring objectives and program design features; metadata (when, where, and how data were collected as well as who collected and analyzed the data); ancillary information (explanatory variables and study-site characteristics); and legal requirements are needed to evaluate data. Documentation of sufficient quality-assurance and quality-control information to establish the quality and uncertainty in the data and interpretations also are needed to determine the comparability and utility of

  7. Materials Selection Criteria for Nuclear Power Applications: A Decision Algorithm

    NASA Astrophysics Data System (ADS)

    Rodríguez-Prieto, Álvaro; Camacho, Ana María; Sebastián, Miguel Ángel

    2016-02-01

    An innovative methodology based on stringency levels is proposed in this paper and improves the current selection method for structural materials used in demanding industrial applications. This paper describes a new approach for quantifying the stringency of materials requirements based on a novel deterministic algorithm to prevent potential failures. We have applied the new methodology to different standardized specifications used in pressure vessels design, such as SA-533 Grade B Cl.1, SA-508 Cl.3 (issued by the American Society of Mechanical Engineers), DIN 20MnMoNi55 (issued by the German Institute of Standardization) and 16MND5 (issued by the French Nuclear Commission) specifications and determine the influence of design code selection. This study is based on key scientific publications on the influence of chemical composition on the mechanical behavior of materials, which were not considered when the technological requirements were established in the aforementioned specifications. For this purpose, a new method to quantify the efficacy of each standard has been developed using a deterministic algorithm. The process of assigning relative weights was performed by consulting a panel of experts in materials selection for reactor pressure vessels to provide a more objective methodology; thus, the resulting mathematical calculations for quantitative analysis are greatly simplified. The final results show that steel DIN 20MnMoNi55 is the best material option. Additionally, more recently developed materials such as DIN 20MnMoNi55, 16MND5 and SA-508 Cl.3 exhibit mechanical requirements more stringent than SA-533 Grade B Cl.1. The methodology presented in this paper can be used as a decision tool in selection of materials for a wide range of applications.

  8. 30 CFR 75.1403-2 - Criteria-Hoists transporting materials; brakes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Criteria-Hoists transporting materials; brakes... Mantrips § 75.1403-2 Criteria—Hoists transporting materials; brakes. Hoists and elevators used to transport materials should be equipped with brakes capable of stopping and holding the fully loaded platform,...

  9. 30 CFR 75.1403-2 - Criteria-Hoists transporting materials; brakes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Criteria-Hoists transporting materials; brakes... Mantrips § 75.1403-2 Criteria—Hoists transporting materials; brakes. Hoists and elevators used to transport materials should be equipped with brakes capable of stopping and holding the fully loaded platform,...

  10. 30 CFR 75.1403-2 - Criteria-Hoists transporting materials; brakes.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Criteria-Hoists transporting materials; brakes... Mantrips § 75.1403-2 Criteria—Hoists transporting materials; brakes. Hoists and elevators used to transport materials should be equipped with brakes capable of stopping and holding the fully loaded platform,...

  11. 30 CFR 75.1403-2 - Criteria-Hoists transporting materials; brakes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Criteria-Hoists transporting materials; brakes... Mantrips § 75.1403-2 Criteria—Hoists transporting materials; brakes. Hoists and elevators used to transport materials should be equipped with brakes capable of stopping and holding the fully loaded platform,...

  12. 30 CFR 75.1403-2 - Criteria-Hoists transporting materials; brakes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Criteria-Hoists transporting materials; brakes... Mantrips § 75.1403-2 Criteria—Hoists transporting materials; brakes. Hoists and elevators used to transport materials should be equipped with brakes capable of stopping and holding the fully loaded platform,...

  13. Do choosing wisely tools meet criteria for patient decision aids? A descriptive analysis of patient materials

    PubMed Central

    Légaré, France; Hébert, Jessica; Goh, Larissa; Lewis, Krystina B; Leiva Portocarrero, Maria Ester; Robitaille, Hubert; Stacey, Dawn

    2016-01-01

    Objectives Choosing Wisely is a remarkable physician-led campaign to reduce unnecessary or harmful health services. Some of the literature identifies Choosing Wisely as a shared decision-making approach. We evaluated the patient materials developed by Choosing Wisely Canada to determine whether they meet the criteria for shared decision-making tools known as patient decision aids. Design Descriptive analysis of all Choosing Wisely Canada patient materials. Data source In May 2015, we selected all Choosing Wisely Canada patient materials from its official website. Main outcomes and measures Four team members independently extracted characteristics of the English materials using the International Patient Decision Aid Standards (IPDAS) modified 16-item minimum criteria for qualifying and certifying patient decision aids. The research team discussed discrepancies between data extractors and reached a consensus. Descriptive analysis was conducted. Results Of the 24 patient materials assessed, 12 were about treatments, 11 were about screening and 1 was about prevention. The median score for patient materials using IPDAS criteria was 10/16 (range: 8–11) for screening topics and 6/12 (range: 6–9) for prevention and treatment topics. Commonly missed criteria were stating the decision (21/24 did not), providing balanced information on option benefits/harms (24/24 did not), citing evidence (24/24 did not) and updating policy (24/24 did not). Out of 24 patient materials, only 2 met the 6 IPDAS criteria to qualify as patient decision aids, and neither of these 2 met the 6 certifying criteria. Conclusions Patient materials developed by Choosing Wisely Canada do not meet the IPDAS minimal qualifying or certifying criteria for patient decision aids. Modifications to the Choosing Wisely Canada patient materials would help to ensure that they qualify as patient decision aids and thus as more effective shared decision-making tools. PMID:27566638

  14. Hospital materials managers need to be aware of actions that constitute legal acceptance.

    PubMed

    Decker, R

    1990-12-01

    A hospital invited bids for building materials for a hospital construction project. A supplier submitted a bid which asked the hospital to sign and return a trade association form contract. The hospital didn't return the form but used the supplier's bid as part of the general contract for the entire project and notified the supplier and the general contractor. Later, the supplier submitted a higher bid for the same material contending that the hospital hadn't accepted the first bid as they hadn't followed the instructions. The hospital materials manager feels that the bid was properly accepted. In this dialogue, Dr. Decker reviews the legal issues involved in the different ways of accepting an offer. PMID:10108690

  15. Selecting the Acceptance Criteria of Medicines in the Reimbursement List of Public Health Insurance of Iran, Using the “Borda” Method: a Pilot Study

    PubMed Central

    Viyanchi, Amir; Rasekh, Hamid Reza; Rajabzadeh Ghatari, Ali; SafiKhani, Hamid Reza

    2015-01-01

    Decision-making for medicines to be accepted in Iran’s public health insurance reimbursement list is a complex process and involves factors, which should be considered in applying a coverage for medicine costs. These processes and factors are not wholly assessed, while assessment of these factors is an essential need for getting a transparent and evidence-based approach toward medicine reimbursement in Iran. This paper aims to show an evidence-based approach toward medicine selection criteria to inform the medical reimbursement decision makers in Iranian health insurance organizations. To explore an adaptable decision-making framework while incorporating a method called “Borda” in medicine reimbursement assessment, we used the help of an expert group including decision makers and clinical researchers who are also policy makers to appraise the five chief criteria that have three sub criteria (Precision, Interpretability, and Cost). Also software “Math-lab”7, “SPSS” 17 and Excel 2007 were used in this study. “Borda” estimates the amount of perceived values from different criteria and creates a range from one to five while providing a comprehensive measurement of a large spectrum of criteria. Participants reported that the framework provided an efficient approach to systematic consideration in a pragmatic format consisting of many parts to guide decision-makings, including criteria and value (a model with the core of Borda) and evidences (medicine reimbursement based on criteria). The most important criterion for medicine acceptance in health insurance companies, in Iran, is the "life-threatening" factor and "evidence quality" is accounted as the fifth important factor. This pilot study showed the usefulness of incorporating Borda in medicine reimbursement decisions to support a transparent and systematic appraisal of health insurance companies' deeds. Further research is needed to advance Borda-based approaches that are effective on health insurance

  16. Selecting the Acceptance Criteria of Medicines in the Reimbursement List of Public Health Insurance of Iran, Using the "Borda" Method: a Pilot Study.

    PubMed

    Viyanchi, Amir; Rasekh, Hamid Reza; Rajabzadeh Ghatari, Ali; SafiKhani, Hamid Reza

    2015-01-01

    Decision-making for medicines to be accepted in Iran's public health insurance reimbursement list is a complex process and involves factors, which should be considered in applying a coverage for medicine costs. These processes and factors are not wholly assessed, while assessment of these factors is an essential need for getting a transparent and evidence-based approach toward medicine reimbursement in Iran. This paper aims to show an evidence-based approach toward medicine selection criteria to inform the medical reimbursement decision makers in Iranian health insurance organizations. To explore an adaptable decision-making framework while incorporating a method called "Borda" in medicine reimbursement assessment, we used the help of an expert group including decision makers and clinical researchers who are also policy makers to appraise the five chief criteria that have three sub criteria (Precision, Interpretability, and Cost). Also software "Math-lab"7, "SPSS" 17 and Excel 2007 were used in this study. "Borda" estimates the amount of perceived values from different criteria and creates a range from one to five while providing a comprehensive measurement of a large spectrum of criteria. Participants reported that the framework provided an efficient approach to systematic consideration in a pragmatic format consisting of many parts to guide decision-makings, including criteria and value (a model with the core of Borda) and evidences (medicine reimbursement based on criteria). The most important criterion for medicine acceptance in health insurance companies, in Iran, is the "life-threatening" factor and "evidence quality" is accounted as the fifth important factor. This pilot study showed the usefulness of incorporating Borda in medicine reimbursement decisions to support a transparent and systematic appraisal of health insurance companies' deeds. Further research is needed to advance Borda-based approaches that are effective on health insurance decision making.

  17. Selecting the Acceptance Criteria of Medicines in the Reimbursement List of Public Health Insurance of Iran, Using the "Borda" Method: a Pilot Study.

    PubMed

    Viyanchi, Amir; Rasekh, Hamid Reza; Rajabzadeh Ghatari, Ali; SafiKhani, Hamid Reza

    2015-01-01

    Decision-making for medicines to be accepted in Iran's public health insurance reimbursement list is a complex process and involves factors, which should be considered in applying a coverage for medicine costs. These processes and factors are not wholly assessed, while assessment of these factors is an essential need for getting a transparent and evidence-based approach toward medicine reimbursement in Iran. This paper aims to show an evidence-based approach toward medicine selection criteria to inform the medical reimbursement decision makers in Iranian health insurance organizations. To explore an adaptable decision-making framework while incorporating a method called "Borda" in medicine reimbursement assessment, we used the help of an expert group including decision makers and clinical researchers who are also policy makers to appraise the five chief criteria that have three sub criteria (Precision, Interpretability, and Cost). Also software "Math-lab"7, "SPSS" 17 and Excel 2007 were used in this study. "Borda" estimates the amount of perceived values from different criteria and creates a range from one to five while providing a comprehensive measurement of a large spectrum of criteria. Participants reported that the framework provided an efficient approach to systematic consideration in a pragmatic format consisting of many parts to guide decision-makings, including criteria and value (a model with the core of Borda) and evidences (medicine reimbursement based on criteria). The most important criterion for medicine acceptance in health insurance companies, in Iran, is the "life-threatening" factor and "evidence quality" is accounted as the fifth important factor. This pilot study showed the usefulness of incorporating Borda in medicine reimbursement decisions to support a transparent and systematic appraisal of health insurance companies' deeds. Further research is needed to advance Borda-based approaches that are effective on health insurance decision making

  18. 10 CFR 32.31 - Certain industrial devices containing byproduct material: Safety criteria.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Certain industrial devices containing byproduct material: Safety criteria. 32.31 Section 32.31 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items §...

  19. An Empirical Assessment of Pedagogical Usability Criteria for Digital Learning Material with Elementary School Students

    ERIC Educational Resources Information Center

    Nokelainen, Petri

    2006-01-01

    This paper presents the pedagogical usability criteria for evaluating the digital learning material. Pedagogical aspects of designing or using digital learning material are much less frequently studied than technical ones. Further, there are relatively few inventories measuring subjective end-user satisfaction with the pedagogical aspects of…

  20. Supporting Infrastructure and Acceptability Issues for Materials Used in New Generation Vehicles

    SciTech Connect

    Das, S.; Curlee, T.R.; Jones, D.W.; Leiby, P.E.; Rubin, J.D.; Schexnayder, S.M.; Vogt, D.P.; Wolfe, A.K.

    1999-03-01

    To achieve its goal of producing vehicles that use two thirds less fuel than current vehicles, the Partnership of a New Generation of Vehicles (PNGV) is designing vehicles that will use lightweight materials in place of heavier materials used in current vehicles. using new materials in automobiles will require the development of a supporting infrastructure to produce both the substitute materials and the components of the substitute materials, as well as the automotive parts constructed from the new materials. This report documents a set of analyses that attempt to identify potential barriers--economic, infrastructure, and public acceptance barriers--to the materials substitution in New Generation Vehicles. The analyses rely on hypothetical vehicle market penetration scenarios and material composition. The approach is comprehensive, examining issues ranging from materials availability to their eventual disposition and its effect on the automobile recycling industry, and from supporting industries' capacity to the public acceptability of these vehicles. The analyses focus on two likely substitute materials, aluminum and glass-reinforced polymer composites.

  1. 76 FR 39922 - Notice of Acceptance of Application for Special Nuclear Materials License From Sensor Concepts...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ... participating under 10 CFR 2.315(c), must be filed in accordance with the NRC E-Filing rule (72 FR 49139, August...\\ Requesters should note that the filing requirements of the NRC's E-Filing Rule (72 FR 49139; August 28, 2007... COMMISSION Notice of Acceptance of Application for Special Nuclear Materials License From Sensor Concepts...

  2. Adequacy Criteria of Models of the Cargo Inspection System with Material Discrimination Option

    NASA Astrophysics Data System (ADS)

    Osipov, S.; Chakhlov, S.; Osipov, O.; Shtein, A.; Van, J.

    2016-01-01

    Generalized adequacy criteria for mathematical models in order to discriminate materials in X-ray inspection systems by the dual-energy method were developed. Two main approaches of the examination systems to produce the adequacy criteria by the final and the intermediate parameters of the dual-energy method were analyzed. The criteria were specified in respect to the discrimination by the effective atomic number and by the method of level functions. Experimental and theoretical estimates of the discrimination parameters of the test object constituents scanned by fan beams of X-ray radiation with the maximal energies of 4.5 and 9 MeV are given.

  3. Minutes of the workshop on off-site release criteria for contaminated materials

    SciTech Connect

    Singh, S.P.N.

    1989-11-01

    A one and one-half-day workshop was held May 2-3, 1989, at the Pollard Auditorium in Oak Ridge, Tennessee, with the objective of formulating a strategy for developing reasonable and uniform criteria for releasing radioactively contaminated materials from the US Department of Energy (DOE) sites. This report contains the minutes of the workshop. At the conclusion of the workshop, a plan was formulated to facilitate the development of the above-mentioned off-site release criteria.

  4. Preliminary selection criteria for the Yucca Mountain Project waste package container material

    SciTech Connect

    Halsey, W.G.

    1991-01-01

    The Department of Energy`s Yucca Mountain Project (YMP) is evaluating a site at Yucca Mountain in Nevada for construction of a geologic repository for the storage of high-level nuclear waste. Lawrence Livermore National Laboratory`s (LLNL) Nuclear Waste Management Project (NWMP) has the responsibility for design, testing, and performance analysis of the waste packages. The design is performed in an iterative manner in three sequential phases (conceptual design, advanced conceptual design, and license application design). An important input to the start of the advanced conceptual design is the selection of the material for the waste containers. The container material is referred to as the `metal barrier` portion of the waste package, and is the responsibility of the Metal Barrier Selection and Testing task at LLNL. The selection will consist of several steps. First, preliminary, material-independent selection criteria will be established based on the performance goals for the container. Second, a variety of engineering materials will be evaluated against these criteria in a screening process to identify candidate materials. Third, information will be obtained on the performance of the candidate materials, and final selection criteria and quantitative weighting factors will be established based on the waste package design requirements. Finally, the candidate materials will be ranked against these criteria to determine whether they meet the mandated performance requirements, and to provide a comparative score to choose the material for advanced conceptual design activities. This document sets forth the preliminary container material selection criteria to be used in screening candidate materials. 5 refs.

  5. 40 CFR 86.610-98 - Compliance with acceptable quality level and passing and failing criteria for Selective...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Selective Enforcement Auditing of New Light-Duty Vehicles, Light-Duty Trucks, and Heavy-Duty Vehicles § 86.610-98 Compliance with acceptable quality...

  6. Development of a comprehensive list of criteria for evaluating consumer education materials on colorectal cancer screening

    PubMed Central

    2013-01-01

    Background Appropriate patient information materials may support the consumer’s decision to attend or not to attend colorectal cancer (CRC) screening tests (fecal occult blood test and screening colonoscopy). The aim of this study was to develop a list of criteria to assess whether written health information materials on CRC screening provide balanced, unbiased, quantified, understandable, and evidence-based health information (EBHI) about CRC and CRC screening. Methods The list of criteria was developed based on recommendations and assessment tools for health information in the following steps: (1) Systematic literature search in 13 electronic databases (search period: 2000–2010) and completed by an Internet search (2) Extraction of identified criteria (3) Grouping of criteria into categories and domains (4) Compilation of a manual of adequate answers derived from systematic reviews and S3 guidelines (5) Review by external experts (6) Modification (7) Final discussion with external experts. Results Thirty-one publications on health information tools and recommendations were identified. The final list of criteria includes a total of 230 single criteria in three generic domains (formal issues, presentation and understandability, and neutrality and balance) and one CRC-specific domain. A multi-dimensional rating approach was used whenever appropriate (e.g., rating for the presence, correctness, presentation and level of evidence of information). Free text input was allowed to ensure the transparency of assessment. The answer manual proved to be essential to the rating process. Quantitative analyses can be made depending on the level and dimensions of criteria. Conclusions This comprehensive list of criteria clearly has a wider range of evaluation than previous assessment tools. It is not intended as a final quality assessment tool, but as a first step toward thorough evaluation of specific information materials for their adherence to EBHI requirements. This

  7. 40 CFR 89.510 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... level and passing and failing criteria for selective enforcement audits. 89.510 Section 89.510 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Selective Enforcement Auditing §...

  8. 40 CFR 91.608 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... level and passing and failing criteria for selective enforcement audits. 91.608 Section 91.608 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Selective Enforcement Auditing Regulations § 91.608...

  9. 40 CFR 91.608 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... level and passing and failing criteria for selective enforcement audits. 91.608 Section 91.608 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Selective Enforcement Auditing Regulations § 91.608...

  10. 40 CFR 89.510 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... level and passing and failing criteria for selective enforcement audits. 89.510 Section 89.510 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Selective Enforcement Auditing §...

  11. Quality of laboratory studies assessing effects of Bt-proteins on non-target organisms: minimal criteria for acceptability.

    PubMed

    De Schrijver, Adinda; Devos, Yann; De Clercq, Patrick; Gathmann, Achim; Romeis, Jörg

    2016-08-01

    The potential risks that genetically modified plants may pose to non-target organisms and the ecosystem services they contribute to are assessed as part of pre-market risk assessments. This paper reviews the early tier studies testing the hypothesis whether exposure to plant-produced Cry34/35Ab1 proteins as a result of cultivation of maize 59122 is harmful to valued non-target organisms, in particular Arthropoda and Annelida. The available studies were assessed for their scientific quality by considering a set of criteria determining their relevance and reliability. As a case-study, this exercise revealed that when not all quality criteria are met, weighing the robustness of the study and its relevance for risk assessment is not obvious. Applying a worst-case expected environmental concentration of bioactive toxins equivalent to that present in the transgenic crop, confirming exposure of the test species to the test substance, and the use of a negative control were identified as minimum criteria to be met to guarantee sufficiently reliable data. This exercise stresses the importance of conducting studies meeting certain quality standards as this minimises the probability of erroneous or inconclusive results and increases confidence in the results and adds certainty to the conclusions drawn.

  12. Quality of laboratory studies assessing effects of Bt-proteins on non-target organisms: minimal criteria for acceptability.

    PubMed

    De Schrijver, Adinda; Devos, Yann; De Clercq, Patrick; Gathmann, Achim; Romeis, Jörg

    2016-08-01

    The potential risks that genetically modified plants may pose to non-target organisms and the ecosystem services they contribute to are assessed as part of pre-market risk assessments. This paper reviews the early tier studies testing the hypothesis whether exposure to plant-produced Cry34/35Ab1 proteins as a result of cultivation of maize 59122 is harmful to valued non-target organisms, in particular Arthropoda and Annelida. The available studies were assessed for their scientific quality by considering a set of criteria determining their relevance and reliability. As a case-study, this exercise revealed that when not all quality criteria are met, weighing the robustness of the study and its relevance for risk assessment is not obvious. Applying a worst-case expected environmental concentration of bioactive toxins equivalent to that present in the transgenic crop, confirming exposure of the test species to the test substance, and the use of a negative control were identified as minimum criteria to be met to guarantee sufficiently reliable data. This exercise stresses the importance of conducting studies meeting certain quality standards as this minimises the probability of erroneous or inconclusive results and increases confidence in the results and adds certainty to the conclusions drawn. PMID:26980555

  13. Application of Negligible Creep Criteria to Candidate Materials for HTGR Pressure Vessels

    SciTech Connect

    Jetter, Robert I; Sham, Sam; Swindeman, Robert W

    2011-01-01

    Two of the proposed High Temperature Gas Reactors (HTGRs) under consideration for a demonstration plant have the design object of avoiding creep effects in the reactor pressure vessel (RPV) during normal operation. This work addresses the criteria for negligible creep in Subsection NH, Division 1 of the ASME B&PV (Boiler and Pressure Vessel) Code, Section III, other international design codes and some currently suggested criteria modifications and their impact on permissible operating temperatures for various reactor pressure vessel materials. The goal of negligible creep could have different interpretations depending upon what failure modes are considered and associated criteria for avoiding the effects of creep. It is shown that for the materials of this study, consideration of localized damage due to cycling of peak stresses results in a lower temperature for negligible creep than consideration of the temperature at which the allowable stress is governed by creep properties. In assessing the effect of localized cyclic stresses it is also shown that consideration of cyclic softening is an important effect that results in a higher estimated temperature for the onset of significant creep effects than would be the case if the material were cyclically hardening. There are other considerations for the selection of vessel material besides avoiding creep effects. Of interest for this review are (1) the material s allowable stress level and impact on wall thickness (the goal being to minimize required wall thickness) and (2) ASME Code approval (inclusion as a permitted material in the relevant Section and Subsection of interest) to expedite regulatory review and approval. The application of negligible creep criteria to two of the candidate materials, SA533 and Mod 9Cr-1Mo (also referred to as Grade 91), and to a potential alternate, normalized and tempered 2 Cr-1Mo, is illustrated and the relative advantages and disadvantages of the materials are discussed.

  14. AMERICAN JOINT COMMITTEE ON CANCER ACCEPTANCE CRITERIA FOR INCLUSION OF RISK MODELS FOR INDIVIDUALIZED PROGNOSIS IN THE PRACTICE OF PRECISION MEDICINE

    PubMed Central

    Kattan, Michael W.; Hess, Kenneth R.; Amin, Mahul; Lu, Ying; Moons, Karel G; Gershenwald, Jeffrey E.; Gimotty, Phyllis A.; Guinney, Justin; Halabi, Susan; Lazar, Alexander J.; Mahar, Alyson L.; Patel, Tushar; Sargent, Daniel J.; Weiser, Martin R.; Compton, Carolyn

    2016-01-01

    The American Joint Committee on Cancer (AJCC) has increasingly recognized the need for more personalized probabilistic predictions than those delivered by ordinal staging systems, particularly through the use of accurate risk models or calculators. However, judging the quality and acceptability of a risk model is complex. The AJCC Precision Medicine Core conducted a two-day meeting to discuss characteristics necessary for a quality risk model in cancer patients. More specifically, the committee established inclusion and exclusion criteria necessary for a risk model to potentially be endorsed by the AJCC. This committee reviewed and discussed relevant literature before creating a checklist unique to this need of AJCC risk model endorsement. The committee identified 13 inclusion and 3 exclusion criteria for AJCC risk model endorsement in cancer. The emphasis centered on performance metrics, implementation clarity, and clinical relevance. The facilitation of personalized probabilistic predictions for cancer patients holds tremendous promise, and these criteria will hopefully greatly accelerate this process. Moreover, these criteria might be useful for a general audience when trying to judge the potential applicability of a published risk model in any clinical domain. PMID:26784705

  15. 40 CFR 227.3 - Materials which do not satisfy the environmental impact criteria set forth in subpart B.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING CRITERIA FOR THE EVALUATION OF PERMIT APPLICATIONS FOR OCEAN DUMPING OF MATERIALS General § 227.3 Materials which do not satisfy the environmental impact criteria set forth in subpart B. If the material proposed for ocean dumping does not satisfy...

  16. Development of acceptance criteria for batches of silane primer for external tank thermal protection system bonding applications

    NASA Technical Reports Server (NTRS)

    Mikes, F.

    1985-01-01

    Fourier transform infrared spectroscopy is currently the best technique for observing hydrolytic changes in DC 1200 silane the primers caused by moisture in the atmosphere. To further prove that FTIR can be used as a criterion test for acceptance of silane primer lots, intensities of the FTIR OH- band are being compared with primer adhesive bond strength using a mechanical test suggested by NASA. Results of tests for shear strength and Oh-absorption are tabulated and compared with FTIR absorption intensities in the OH-region.

  17. Establishment of design criteria for acceptable failure modes and fail safe considerations for the space shuttle structural system

    NASA Technical Reports Server (NTRS)

    Westrup, R. W.

    1972-01-01

    Investigations of fatigue life, and safe-life and fail-safe design concepts as applied to space shuttle structure are summarized. The results are evaluated to select recommended structural design criteria to provide assurance that premature failure due to propagation of undetected crack-like defects will not occur during shuttle operational service. The space shuttle booster, GDC configuration B-9U, is selected as the reference vehicle. Structural elements used as basis of detail analyses include wing spar caps, vertical stabilizer skins, crew compartment skin, orbiter support frame, and propellant tank shell structure. Fatigue life analyses of structural elements are performed to define potential problem areas and establish upper limits of operating stresses. Flaw growth analyses are summarized in parametric form over a range of initial flaw types and sizes, operating stresses and service life requirements. Service life of 100 to 500 missions is considered.

  18. Accepting Mixed Waste as Alternate Feed Material for Processing and Disposal at a Licensed Uranium Mill

    SciTech Connect

    Frydenland, D. C.; Hochstein, R. F.; Thompson, A. J.

    2002-02-26

    Certain categories of mixed wastes that contain recoverable amounts of natural uranium can be processed for the recovery of valuable uranium, alone or together with other metals, at licensed uranium mills, and the resulting tailings permanently disposed of as 11e.(2) byproduct material in the mill's tailings impoundment, as an alternative to treatment and/or direct disposal at a mixed waste disposal facility. This paper discusses the regulatory background applicable to hazardous wastes, mixed wastes and uranium mills and, in particular, NRC's Alternate Feed Guidance under which alternate feed materials that contain certain types of mixed wastes may be processed and disposed of at uranium mills. The paper discusses the way in which the Alternate Feed Guidance has been interpreted in the past with respect to processing mixed wastes and the significance of recent changes in NRC's interpretation of the Alternate Feed Guidance that sets the stage for a broader range of mixed waste materials to be processed as alternate feed materials. The paper also reviews the le gal rationale and policy reasons why materials that would otherwise have to be treated and/or disposed of as mixed waste, at a mixed waste disposal facility, are exempt from RCRA when reprocessed as alternate feed material at a uranium mill and become subject to the sole jurisdiction of NRC, and some of the reasons why processing mixed wastes as alternate feed materials at uranium mills is preferable to direct disposal. Finally, the paper concludes with a discussion of the specific acceptance, characterization and certification requirements applicable to alternate feed materials and mixed wastes at International Uranium (USA) Corporation's White Mesa Mill, which has been the most active uranium mill in the processing of alternate feed materials under the Alternate Feed Guidance.

  19. Regulatory analysis on criteria for the release of patients administered radioactive material

    SciTech Connect

    Schneider, S.; McGuire, S.A.; Behling, U.H.; Behling, K.; Goldin, D.

    1994-05-01

    The Nuclear Regulatory Commission (NRC) has received two petitions to amend its regulations in 10 CFR Parts 20 and 35 as they apply to doses received by members of the public exposed to patients released from a hospital after they have been administered radioactive material. While the two petitions are not identical they both request that the NRC establish a dose limit of 5 millisieverts (0.5 rem) per year for individuals exposed to patients who have been administered radioactive materials. This Regulatory Analysis evaluates three alternatives. Alternative 1 is for the NRC to amend its patient release criteria in 10 CFR 35.75 to use the more stringent dose limit of 1 millisievert per year in 10 CFR 20.1301(a) for its patient release criteria. Alternative 2 is for the NRC to continue using the existing patient release criteria in 10 CFR 35.75 of 1,110 megabecquerels of activity or a dose rate at one meter from the patient of 0.05 millisievert per hour. Alternative 3 is for the NRC to amend the patient release criteria in 10 CFR 35.75 to specify a dose limit of 5 millisieverts for patient release. The evaluation indicates that Alternative 1 would cause a prohibitively large increase in the national health care cost from retaining patients in a hospital longer and would cause significant personal and psychological costs to patients and their families. The choice of Alternatives 2 or 3 would affect only thyroid cancer patients treated with iodine-131. For those patients, Alternative 3 would result in less hospitalization than Alternative 2. Alternative 3 has a potential decrease in national health care cost of $30,000,000 per year but would increase the potential collective dose from released therapy patients by about 2,700 person-rem per year, mainly to family members.

  20. Treatment of Irradiated Graphite to meet Acceptance Criteria for Waste Disposal: A New IAEA Collaborative Research Program - 12443

    SciTech Connect

    Wickham, A.J.; Drace, Z.

    2012-07-01

    World-wide, more than 250,000 tonnes of irradiated graphite have arisen through commercial nuclear-power operations and from military production reactors. Whilst most nations responsible for the generation of this material have in mind repository disposal alongside other radwaste, the lack of progress in this regard has led in some cases to difficulties where, for example, the site of an existing graphite-moderated reactor is required for re-utilisation. In any case, graphite as a radwaste stream has unique chemical and physical properties which may lend itself to more radical and innovative treatment and disposal options, including the recovery of useful isotopes and also recycling within the nuclear industry. Such aspects are important in making the case for future graphite-moderated reactor options (for example, High-Temperature Reactors planned for simultaneous power production and high-grade heat sources for such applications as hydrogen production for road fuel). A number of initiatives have taken place since the mid 1990s aimed at exploring such alternative strategies and, more recently, improving technology offers new options at all stages of the dismantling and disposal process. A new IAEA Collaborative Research Program aims to build upon the work already done and the knowledge achieved, in order to identify the risks and uncertainties associated with alternative options for graphite disposal, along with cost comparisons, thus enabling individual Member States to have the best-available information at their disposal to configure their own programs. (authors)

  1. Cleaning level acceptance criteria and a high pressure liquid chromatography procedure for the assay of Meclizine Hydrochloride residue in swabs collected from pharmaceutical manufacturing equipment surfaces.

    PubMed

    Mirza, T; Lunn, M J; Keeley, F J; George, R C; Bodenmiller, J R

    1999-04-01

    A method using pharmacologically based and visual limit of detection criteria to determine the acceptable residue level for Meclizine Hydrochloride (MH) on pharmaceutical manufacturing equipment surfaces after cleaning is described. A formula was used in order to determine the pharmacologically safe cleaning level for MH. This level was termed as specific residual cleaning Level (SRCL) and calculated to be 50 microg 100 cm(-2). The visual limit of detection (VLOD) was determined by spiking different levels of MH on stainless steel plates and having the plates examined by a group of observers. The lowest level that could be visually detected by the majority of the observers, 62.5 microg 100 cm(-2), was considered as the VLOD for MH. The lower of the SRCL and VLOD values, i.e. 50 microg 100 cm(-2), was therefore chosen as the cleaning acceptance criterion. A sensitive reversed-phase HPLC method was developed and validated for the assay of MH in swabs used to test equipment surfaces. Using this method, the mean recoveries of MH from spiked swabs and '180-Grit' stainless steel plates were 87.0 and 89.5% with relative standard deviations (RSD) of +/- 3.3 and +/- 2.4%, respectively. The method was successfully applied to the assay of actual swab samples collected from the equipment surfaces. The stability of MH on stainless steel plates, on cleaning swabs and in the extraction solution was investigated. PMID:10698538

  2. Regulatory analysis on criteria for the release of patients administered radioactive material. Final report

    SciTech Connect

    Schneider, S.; McGuire, S.A.

    1997-02-01

    This regulatory analysis was developed to respond to three petitions for rulemaking to amend 10 CFR parts 20 and 35 regarding release of patients administered radioactive material. The petitions requested revision of these regulations to remove the ambiguity that existed between the 1-millisievert (0.1-rem) total effective dose equivalent (TEDE) public dose limit in Part 20, adopted in 1991, and the activity-based release limit in 10 CFR 35.75 that, in some instances, would permit release of individuals in excess of the current public dose limit. Three alternatives for resolution of the petitions were evaluated. Under Alternative 1, NRC would amend its patient release criteria in 10 CFR 35.75 to match the annual public dose limit in Part 20 of 1 millisievert (0.1 rem) TEDE. Alternative 2 would maintain the status quo of using the activity-based release criteria currently found in 10 CFR 35.75. Under Alternative 3, the NRC would revise the release criteria in 10 CFR 35.75 to specify a dose limit of 5 millisieverts (0.5 rem) TEDE.

  3. Formulation of a candidate glass for use as an acceptance test standard material

    SciTech Connect

    Ebert, W.L.; Strachan, D.M.; Wolf, S.F.

    1998-04-01

    In this report, the authors discuss the formulation of a glass that will be used in a laboratory testing program designed to measure the precision of test methods identified in the privatization contracts for the immobilization of Hanford low-activity wastes. Tests will be conducted with that glass to measure the reproducibility of tests and analyses that must be performed by glass producers as a part of the product acceptance procedure. Test results will be used to determine if the contractually required tests and analyses are adequate for evaluating the acceptability of likely immobilized low-activity waste (ILAW) products. They will also be used to evaluate if the glass designed for use in these tests can be used as an analytical standard test material for verifying results reported by vendors for tests withg ILAW products. The results of those tests and analyses will be presented in a separate report. The purpose of this report is to document the strategy used to formulate the glass to be used in the testing program. The low-activity waste reference glass LRM that will be used in the testing program was formulated to be compositionally similar to ILAW products to be made with wastes from Hanford. Since the ILAW product compositions have not been disclosed by the vendors participating in the Hanford privatization project, the composition of LRM was formulated based on simulated Hanford waste stream and amounts of added glass forming chemicals typical for vitrified waste forms. The major components are 54 mass % SiO{sub 2}, 20 mass % Na{sub 2}O, 10 mass % Al{sub 2}O{sub 3}, 8 mass % B{sub 2}O{sub 3}, and 1.5 mass % K{sub 2}O. Small amounts of other chemicals not present in Hanford wastes were also included in the glass, since they may be included as chemical additives in ILAW products. This was done so that the use of LRM as a composition standard could be evaluated. Radionuclides were not included in LRM because a nonradioactive material was desired.

  4. Draft principles, policy, and acceptance criteria for decommissioning of U.S. Department of Energy contaminated surplus facilities and summary of international decommissioning programs

    SciTech Connect

    Singh, B.K. |; Gillette, J.; Jackson, J.

    1994-12-01

    Decommissioning activities enable the DOE to reuse all or part of a facility for future activities and reduce hazards to the general public and any future work force. The DOE Office of Environment, Health and Safety has prepared this document, which consists of decommissioning principles and acceptance criteria, in an attempt to establish a policy that is in agreement with the NRC policy. The purpose of this document is to assist individuals involved with decommissioning activities in determining their specific responsibilities as identified in Draft DOE Order 5820.DDD, ``Decommissioning of US Department of Energy Contaminated Surplus Facilities`` (Appendix A). This document is not intended to provide specific decommissioning methodology. The policies and principles of several international decommissioning programs are also summarized. These programs are from the IAEA, the NRC, and several foreign countries expecting to decommission nuclear facilities. They are included here to demonstrate the different policies that are to be followed throughout the world and to allow the reader to become familiar with the state of the art for environment, safety, and health (ES and H) aspects of nuclear decommissioning.

  5. Severe deterministic effects of external exposure and intake of radioactive material: basis for emergency response criteria.

    PubMed

    Kutkov, V; Buglova, E; McKenna, T

    2011-06-01

    Lessons learned from responses to past events have shown that more guidance is needed for the response to radiation emergencies (in this context, a 'radiation emergency' means the same as a 'nuclear or radiological emergency') which could lead to severe deterministic effects. The International Atomic Energy Agency (IAEA) requirements for preparedness and response for a radiation emergency, inter alia, require that arrangements shall be made to prevent, to a practicable extent, severe deterministic effects and to provide the appropriate specialised treatment for these effects. These requirements apply to all exposure pathways, both internal and external, and all reasonable scenarios, to include those resulting from malicious acts (e.g. dirty bombs). This paper briefly describes the approach used to develop the basis for emergency response criteria for protective actions to prevent severe deterministic effects in the case of external exposure and intake of radioactive material. PMID:21617296

  6. 40 CFR 60.1075 - When must I accept comments on the materials separation plan?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...? (a) You must accept verbal comments at the public meeting. (b) You must accept written comments anytime during the period that begins on the date the document is distributed to the main public libraries and ends 30 days after the date of the public meeting....

  7. Performance testing of aged hydrogen getters against criteria for interim safe storage of plutonium bearing materials.

    SciTech Connect

    Shepodd, Timothy J.; Nissen, April; Buffleben, George M.

    2006-01-01

    Hydrogen getters were tested for use in storage of plutonium-bearing materials in accordance with DOE's Criteria for Interim Safe Storage of Plutonium Bearing Materials. The hydrogen getter HITOP was aged for 3 months at 70 C and tested under both recombination and hydrogenation conditions at 20 and 70 C; partially saturated and irradiated aged getter samples were also tested. The recombination reaction was found to be very fast and well above the required rate of 45 std. cc H2h. The gettering reaction, which is planned as the backup reaction in this deployment, is slower and may not meet the requirements alone. Pressure drop measurements and {sup 1}H NMR analyses support these conclusions. Although the experimental conditions do not exactly replicate the deployment conditions, the results of our conservative experiments are clear: the aged getter shows sufficient reactivity to maintain hydrogen concentrations below the flammability limit, between the minimum and maximum deployment temperatures, for three months. The flammability risk is further reduced by the removal of oxygen through the recombination reaction. Neither radiation exposure nor thermal aging sufficiently degrades the getter to be a concern. Future testing to evaluate performance for longer aging periods is in progress.

  8. Development of a micromechanics based failure criteria for transversely loaded composite materials

    NASA Astrophysics Data System (ADS)

    Foster, Dean Curtis

    2008-10-01

    initiation modes that occurred as a result of the varying internal stress state as a function of fiber spacing. The criteria accurately predicted the observed debonding limits and matrix cavitation of both matrix systems. The detailed understanding and findings of this work will assist the materials engineer by increasing the fidelity of composite solutions to meet the increasing aerospace structural demands.

  9. Workshop to Obtain Input on Draft Materials for the Integrated Science Assessment (ISA) for Sulfur Oxides (SOx): Health Criteria

    EPA Science Inventory

    As part of the review of the air quality criteria for sulfur oxides (SOX) and primary (health-based) National Ambient Air Quality Standards (NAAQS) for sulfur dioxide (SO2), EPA is announcing a teleconference workshop to evaluate preliminary draft materials ...

  10. The consequences of effortful emotion regulation when processing distressing material: A comparison of suppression and acceptance

    PubMed Central

    Dunn, Barnaby D.; Billotti, Danielle; Murphy, Vicky; Dalgleish, Tim

    2009-01-01

    The present study investigated the consequences of different forms of emotion regulation. Eighty nine healthy participants viewed a distressing video of the aftermath of road traffic accidents under either suppression (of both felt and expressed affect), acceptance, or no-regulation control instructions and the immediate and longer-term consequences on emotion, mood, and memory were examined. Suppression (relative to control) led to reduced subjective experience of fear when viewing the video, but did not alter electrodermal (EDA) or heart rate (HR) response. Subsequently, suppression led to a less marked subjective emotional reaction to positive but not negative emotional images, reduced free recall memory of the video, and a greater likelihood of experiencing zero intrusions of the video's content. Acceptance (relative to control) had no impact when viewing the video, was associated with a less marked increase in EDA activity in the 5 min period immediately after viewing the video, a more marked HR deceleration and EDA response to both positive and negative images, and elevated negative affect at one week follow-up. These findings suggest, contrary to the current clinical zeitgeist, that emotion suppression can successfully lead to an ongoing down-regulation of emotion and memory, whereas acceptance may elevate subsequent emotionality. PMID:19559401

  11. A data base and a standard material for use in acceptance testing of low-activity waste products

    SciTech Connect

    Wolf, S.F.; Ebert, W.L.; Luo, J.S.; Strachan, D.M.

    1998-04-01

    The authors have conducted replicate dissolution tests following the product consistency test (PCT) procedure to measure the mean and standard deviation of the solution concentrations of B, Na, and Si at various combinations of temperature, duration, and glass/water mass ratio. Tests were conducted with a glass formulated to be compositionally similar to low-activity waste products anticipated for Hanford to evaluate the adequacy of test methods that have been designated in privatization contracts for use in product acceptance. An important finding from this set of tests is that the solution concentrations generated in tests at 20 C will likely be too low to measure the dissolution rates of waste products reliably. Based on these results, the authors recommend that the acceptance test be conducted at 40 C. Tests at 40 C generated higher solution concentrations, were more easily conducted, and the measured rates were easily related to those at 20 C. Replicate measurements of other glass properties were made to evaluate the possible use of LRM-1 as a standard material. These include its composition, homogeneity, density, compressive strength, the Na leachability index with the ANSI/ANS 16.1 leach test, and if the glass is characteristically hazardous with the toxicity characteristic leach procedure. The values of these properties were within the acceptable limits identified for Hanford low-activity waste products. The reproducibility of replicate tests and analyses indicates that the glass would be a suitable standard material.

  12. STRUCTURAL DESIGN CRITERIA FOR TARGET/BLANKET SYSTEM COMPONENT MATERIALS FOR THE ACCELERATOR PRODUCTION OF TRITIUM PROJECT

    SciTech Connect

    W. JOHNSON; R. RYDER; P. RITTENHOUSE

    2001-01-01

    The design of target/blanket system components for the Accelerator Production of Tritium (APT) plant is dependent on the development of materials properties data specified by the designer. These data are needed to verify that component designs are adequate. The adequacy of the data will be related to safety, performance, and economic considerations, and to other requirements that may be deemed necessary by customers and regulatory bodies. The data required may already be in existence, as in the open technical literature, or may need to be generated, as is often the case for the design of new systems operating under relatively unique conditions. The designers' starting point for design data needs is generally some form of design criteria used in conjunction with a specified set of loading conditions and associated performance requirements. Most criteria are aimed at verifying the structural adequacy of the component, and often take the form of national or international standards such as the ASME Boiler and Pressure Vessel Code (ASME B and PV Code) or the French Nuclear Structural Requirements (RCC-MR). Whether or not there are specific design data needs associated with the use of these design criteria will largely depend on the uniqueness of the conditions of operation of the component. A component designed in accordance with the ASME B and PV Code, where no unusual environmental conditions exist, will utilize well-documented, statistically-evaluated developed in conjunction with the Code, and will not be likely to have any design data needs. On the other hand, a component to be designed to operate under unique APT conditions, is likely to have significant design data needs. Such a component is also likely to require special design criteria for verification of its structural adequacy, specifically accounting for changes in materials properties which may occur during exposure in the service environment. In such a situation it is common for the design criteria and

  13. 78 FR 56618 - Incorporation by Reference; North American Standard Out-of-Service Criteria; Hazardous Materials...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-13

    ... of the out-of- service criteria, 49 CFR 385.4, as amended on October 1, 2012 (77 FR 59818) references... regulatory action within the meaning of E.O. 12866, as supplemented by E.O. 13563 (76 FR 3821, January 18, 2011), or within the meaning of the DOT regulatory policies and procedures (44 FR 1103, February...

  14. 77 FR 61443 - Acceptance of Application for Special Nuclear Materials License From Rensselaer Polytechnic...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-09

    ... fuel for fissile material inventory using a lead slowing down spectrometer. The original application..., and have the opportunity to participate fully in the conduct of the hearing with respect to resolution... FR 49139; August 28, 2007). The E-Filing process requires participants to submit and serve...

  15. Perspectives on Influencing Aspects for Students' Acceptance of Multimedia Materials in Training Programs

    ERIC Educational Resources Information Center

    Córdova, Mayra Lucía González; Zermeño, Marcela Georgina Gómez; Mejía, Irma Antonia García

    2015-01-01

    This study was carried out in order to improve the understanding and learning of participants enrolled in face-to-face training programs, and to enhance their learning and retention of content through multimedia materials. A qualitative study was conducted to inquire about the perception of the participants and instructors of an Administrative…

  16. Managing suspect radioactive material in the DOE system -- A program to establish lower activity disposal criteria

    SciTech Connect

    Pollard, C.G.; Shuman, R.; Rogers, V.

    1994-12-31

    Operations at Department of Energy (DOE) nuclear installations routinely generate radioactively contaminated waste. A large portion of this waste has extremely low levels of radioactive contamination or is suspect waste. Despite these very low levels of contamination, this waste is disposed of as low-level radioactive waste (LLW) or mixed waste. Doing so depleted limited available disposal capacity while providing little or no incremental benefit to the public health and safety. Efforts have been made by federal agencies, states, and industry to establish less rigorous control criteria for waste with low levels of radioactive contamination. The DOE addressed the establishment of lower activity disposal criteria in its threshold limit guidance in the early 1980s, but, to date, nor formal limits have emerged from the Department. A number of DOE installation have calculated suitable site-specific release limits. Efforts by other federal agencies range from proposed dose criteria for Below Regulatory Concern (BRC) waste developed by the U.S. Environmental Protection Agency (EPA) to policy statements by the U.S. Nuclear Regulatory Commission (NRC) on BRC waste which were subsequently withdrawn. Such limits may be developed incrementally, focusing first on waste streams that are easily characterized and that will provide the greatest immediate benefit to the DOE system. Limits may then be developed for waste streams containing more complex mixtures of radionuclides. Separate limits may be developed for each DOE site, taking into account the site-specific disposal conditions, or a single set of limits may be developed for the entire DOE system. Once lower activity disposal limits are established, DOE installations will need to develop waste characterization methods adequate to ensure compliance with the new lower activity disposal criteria.

  17. Electron-accepting conjugated materials based on 2-vinyl-4,5-dicyanoimidazoles for application in organic electronics.

    PubMed

    Shin, Richard Y C; Sonar, Prashant; Siew, Pei Sann; Chen, Zhi-Kuan; Sellinger, Alan

    2009-05-01

    We report the Heck coupling of 2-vinyl-4,5-dicyanoimidazole (vinazene) with selected di- and trihalo aromatics in an effort to prepare linear and branched electron-accepting conjugated materials for application in organic electronics. By selecting the suitable halo-aromatic moiety, it is possible to tune the HOMO-LUMO energy levels, absorption, and emission properties for a specific application. In this regard, materials with strong photoluminescence from blue --> green --> red are reported that may have potential application in organic light-emitting diodes (OLEDs). Furthermore, derivatives with strong absorption in the visible spectrum, coupled with favorable HOMO-LUMO levels, have been used to prepare promising organic photovoltaic devices (OPVs) when combined with commercially available semiconducting donor polymers.

  18. Syntheses of D-A-A Type Small Molecular Donor Materials Having Various Electron Accepting Moiety for Organic Photovoltaic Application.

    PubMed

    Kim, Nahyeon; Park, Sangman; Lee, Myong-Hoon; Lee, Jaemin; Lee, Changjin; Yoon, Sung Cheol

    2016-03-01

    Small molecular donor, DTDCTB achieved a high power conversion efficiency (PCE) value of 6.6 ± 0.2% in vacuum-deposited planar mixed heterojunction (PMHJ) structure. However, the same material just recorded PCE of 0.34% in solution processed small molecule based bulk heterjunction (BHJ) organic photovoltaic cells. For the improvement of organic photovoltaic cells (OPVs), In this study, we designed and synthesized several D-A-A (donor-acceptor-acceptor) type molecular electron donating materials. Ditolylaminothienyl moiety as an electron donating group connected to 1,2,5-benzothiadiazole as a conjugated electron accepting unit, simultaneously with an electron accepting terminal group such as cyano alkyl acetate and N-alkyl rhodanine. The thermal, photophysical, and electrochemical properties of prepared small molecules were investigated by DSC, UV/Vis spectroscopy and Cyclic Voltametry, respectively. As a result, 0.89% of PCE can be obtained from OPV using a mixture of DTATBTER and PCBM as an active layer with a Voc of 0.87 V, a Jsc of 3.20 mA/cm2, and a fill factor of 31.9%. PMID:27455734

  19. Syntheses of D-A-A Type Small Molecular Donor Materials Having Various Electron Accepting Moiety for Organic Photovoltaic Application.

    PubMed

    Kim, Nahyeon; Park, Sangman; Lee, Myong-Hoon; Lee, Jaemin; Lee, Changjin; Yoon, Sung Cheol

    2016-03-01

    Small molecular donor, DTDCTB achieved a high power conversion efficiency (PCE) value of 6.6 ± 0.2% in vacuum-deposited planar mixed heterojunction (PMHJ) structure. However, the same material just recorded PCE of 0.34% in solution processed small molecule based bulk heterjunction (BHJ) organic photovoltaic cells. For the improvement of organic photovoltaic cells (OPVs), In this study, we designed and synthesized several D-A-A (donor-acceptor-acceptor) type molecular electron donating materials. Ditolylaminothienyl moiety as an electron donating group connected to 1,2,5-benzothiadiazole as a conjugated electron accepting unit, simultaneously with an electron accepting terminal group such as cyano alkyl acetate and N-alkyl rhodanine. The thermal, photophysical, and electrochemical properties of prepared small molecules were investigated by DSC, UV/Vis spectroscopy and Cyclic Voltametry, respectively. As a result, 0.89% of PCE can be obtained from OPV using a mixture of DTATBTER and PCBM as an active layer with a Voc of 0.87 V, a Jsc of 3.20 mA/cm2, and a fill factor of 31.9%.

  20. Adaptation Criteria for the Personalised Delivery of Learning Materials: A Multi-Stage Empirical Investigation

    ERIC Educational Resources Information Center

    Thalmann, Stefan

    2014-01-01

    Personalised e-Learning represents a major step-change from the one-size-fits-all approach of traditional learning platforms to a more customised and interactive provision of learning materials. Adaptive learning can support the learning process by tailoring learning materials to individual needs. However, this requires the initial preparation of…

  1. Trade-offs in traditional criteria vs environmental acceptability in product development: an example of the drilling fluids industry's response to environmental regulations

    SciTech Connect

    Jones, M.; Collins, C.; Havis, D.

    1980-01-01

    The coevolution of increased energy needs and a heightened environmental awareness within the past decade has been fraught with direct conflicts. Often, these conflicts were necessary to solidify boad policy acts or challenge nebulous or unclear regulations. The drilling fluids industry, a vital part of petroleum exploration and production, has recognized the need for avoiding future conflicts and for insuring the conservation of our environment. This recognition is best witnessed by the production of new products or the alteration of established products to eliminate or minimize environmental impact. As an example, biocides used by the industry to preserve drilling fluids and control microbiological problems have been under close scrutinization by the Environmental Protection Agency, the United States Geological Service, and the National Marine Fisheries Service. The need to develop new products in this area or substitute the active ingredients of established products is evident. Data are presented on 19 active ingredients under consideration by IMCO Services. Of the 19, three failed performance tests. An additional seven were dismissed because of environmental concerns even though all passed performace testing. Of the nine remaining, four were selected because of their optimal combination of performance and environmental acceptability. The final choice appeared acceptable in both categories and was economically competitive. By careful consideration of applicable regulations, it is intended that future conflicts over use and disposal of this product will be minimzed.

  2. Criteria for the development and use of the methodology for environmentally-acceptable fossil energy site evaluation and selection. Volume 2. Final report

    SciTech Connect

    Eckstein, L.; Northrop, G.; Scott, R.

    1980-02-01

    This report serves as a companion document to the report, Volume 1: Environmentally-Acceptable Fossil Energy Site Evaluation and Selection: Methodology and Users Guide, in which a methodology was developed which allows the siting of fossil fuel conversion facilities in areas with the least environmental impact. The methodology, known as SELECS (Site Evaluation for Energy Conversion Systems) does not replace a site specific environmental assessment, or an environmental impact statement (EIS), but does enhance the value of an EIS by thinning down the number of options to a manageable level, by doing this in an objective, open and selective manner, and by providing preliminary assessment and procedures which can be utilized during the research and writing of the actual impact statement.

  3. Cost-driven materials selection criteria for redox flow battery electrolytes

    NASA Astrophysics Data System (ADS)

    Dmello, Rylan; Milshtein, Jarrod D.; Brushett, Fikile R.; Smith, Kyle C.

    2016-10-01

    Redox flow batteries show promise for grid-scale energy storage applications but are presently too expensive for widespread adoption. Electrolyte material costs constitute a sizeable fraction of the redox flow battery price. As such, this work develops a techno-economic model for redox flow batteries that accounts for redox-active material, salt, and solvent contributions to the electrolyte cost. Benchmark values for electrolyte constituent costs guide identification of design constraints. Nonaqueous battery design is sensitive to all electrolyte component costs, cell voltage, and area-specific resistance. Design challenges for nonaqueous batteries include minimizing salt content and dropping redox-active species concentration requirements. Aqueous battery design is sensitive to only redox-active material cost and cell voltage, due to low area-specific resistance and supporting electrolyte costs. Increasing cell voltage and decreasing redox-active material cost present major materials selection challenges for aqueous batteries. This work minimizes cost-constraining variables by mapping the battery design space with the techno-economic model, through which we highlight pathways towards low price and moderate concentration. Furthermore, the techno-economic model calculates quantitative iterations of battery designs to achieve the Department of Energy battery price target of 100 per kWh and highlights cost cutting strategies to drive battery prices down further.

  4. A multi-criteria approach for the dumping of dredged material in the Thermaikos Gulf, Northern Greece.

    PubMed

    Kapsimalis, Vasilios; Panagiotopoulos, Ioannis; Kanellopoulos, Theodore; Hatzianestis, Ioannis; Antoniou, Panayota; Anagnostou, Christos

    2010-12-01

    A multi-criteria approach was applied for the disposal into the sea of ∼1,100,000 m(3) of sediment, dredged from a coastal area in the northeastern part of the Thermaikos Gulf. This sediment (classified as muddy) is distributed vertically into two distinct Layers (A and B) with the thickness of the surficial sedimentary unit ranging from 7 to 54 cm. Its geochemistry reveals increased Cr and Ni concentrations, which may be attributed to natural enrichment through the erosion of the adjacent igneous and metamorphic rocks. In addition, a low to moderate contamination from urban-originated heavy metals, like Cu, Pb and Zn as well as from aliphatic and polycyclic hydrocarbons was identified for the upper Layer A. However, the limited proportion (5.5%) of the polluted Layer A in the total volume of the dredged material could not affect the good quality (assessed by the Sediment Quality Guidelines) of the bulk sediment. The identification of the optimum marine dumping site was based on (a) the physicochemical similarity (detected by the application of a cluster analysis) of the dredged material with the surficial deposits of potential dumping sites in the Outer Thermaikos Gulf, and (b) the consideration, based on previous studies, of various criteria related to the disposal area such as deep-water circulation, influence on living resources, impact on economical (aquaculture, fishing, navigation), recreational (fishing) and military activities.

  5. A multi-criteria approach for the dumping of dredged material in the Thermaikos Gulf, Northern Greece.

    PubMed

    Kapsimalis, Vasilios; Panagiotopoulos, Ioannis; Kanellopoulos, Theodore; Hatzianestis, Ioannis; Antoniou, Panayota; Anagnostou, Christos

    2010-12-01

    A multi-criteria approach was applied for the disposal into the sea of ∼1,100,000 m(3) of sediment, dredged from a coastal area in the northeastern part of the Thermaikos Gulf. This sediment (classified as muddy) is distributed vertically into two distinct Layers (A and B) with the thickness of the surficial sedimentary unit ranging from 7 to 54 cm. Its geochemistry reveals increased Cr and Ni concentrations, which may be attributed to natural enrichment through the erosion of the adjacent igneous and metamorphic rocks. In addition, a low to moderate contamination from urban-originated heavy metals, like Cu, Pb and Zn as well as from aliphatic and polycyclic hydrocarbons was identified for the upper Layer A. However, the limited proportion (5.5%) of the polluted Layer A in the total volume of the dredged material could not affect the good quality (assessed by the Sediment Quality Guidelines) of the bulk sediment. The identification of the optimum marine dumping site was based on (a) the physicochemical similarity (detected by the application of a cluster analysis) of the dredged material with the surficial deposits of potential dumping sites in the Outer Thermaikos Gulf, and (b) the consideration, based on previous studies, of various criteria related to the disposal area such as deep-water circulation, influence on living resources, impact on economical (aquaculture, fishing, navigation), recreational (fishing) and military activities. PMID:20674146

  6. Design Criteria, Operating Conditions, and Nickel-Iron Hydroxide Catalyst Materials for Selective Seawater Electrolysis.

    PubMed

    Dionigi, Fabio; Reier, Tobias; Pawolek, Zarina; Gliech, Manuel; Strasser, Peter

    2016-05-10

    Seawater is an abundant water resource on our planet and its direct electrolysis has the advantage that it would not compete with activities demanding fresh water. Oxygen selectivity is challenging when performing seawater electrolysis owing to competing chloride oxidation reactions. In this work we propose a design criterion based on thermodynamic and kinetic considerations that identifies alkaline conditions as preferable to obtain high selectivity for the oxygen evolution reaction. The criterion states that catalysts sustaining the desired operating current with an overpotential <480 mV in alkaline pH possess the best chance to achieve 100 % oxygen/hydrogen selectivity. NiFe layered double hydroxide is shown to satisfy this criterion at pH 13 in seawater-mimicking electrolyte. The catalyst was synthesized by a solvothermal method and the activity, surface redox chemistry, and stability were tested electrochemically in alkaline and near-neutral conditions (borate buffer at pH 9.2) and under both fresh seawater conditions. The Tafel slope at low current densities is not influenced by pH or presence of chloride. On the other hand, the addition of chloride ions has an influence in the temporal evolution of the nickel reduction peak and on both the activity and stability at high current densities at pH 9.2. Faradaic efficiency close to 100 % under the operating conditions predicted by our design criteria was proven using in situ electrochemical mass spectrometry.

  7. Design Criteria, Operating Conditions, and Nickel-Iron Hydroxide Catalyst Materials for Selective Seawater Electrolysis.

    PubMed

    Dionigi, Fabio; Reier, Tobias; Pawolek, Zarina; Gliech, Manuel; Strasser, Peter

    2016-05-10

    Seawater is an abundant water resource on our planet and its direct electrolysis has the advantage that it would not compete with activities demanding fresh water. Oxygen selectivity is challenging when performing seawater electrolysis owing to competing chloride oxidation reactions. In this work we propose a design criterion based on thermodynamic and kinetic considerations that identifies alkaline conditions as preferable to obtain high selectivity for the oxygen evolution reaction. The criterion states that catalysts sustaining the desired operating current with an overpotential <480 mV in alkaline pH possess the best chance to achieve 100 % oxygen/hydrogen selectivity. NiFe layered double hydroxide is shown to satisfy this criterion at pH 13 in seawater-mimicking electrolyte. The catalyst was synthesized by a solvothermal method and the activity, surface redox chemistry, and stability were tested electrochemically in alkaline and near-neutral conditions (borate buffer at pH 9.2) and under both fresh seawater conditions. The Tafel slope at low current densities is not influenced by pH or presence of chloride. On the other hand, the addition of chloride ions has an influence in the temporal evolution of the nickel reduction peak and on both the activity and stability at high current densities at pH 9.2. Faradaic efficiency close to 100 % under the operating conditions predicted by our design criteria was proven using in situ electrochemical mass spectrometry. PMID:27010750

  8. Optimality criteria-based topology optimization of a bi-material model for acoustic-structural coupled systems

    NASA Astrophysics Data System (ADS)

    Shang, Linyuan; Zhao, Guozhong

    2016-06-01

    This article investigates topology optimization of a bi-material model for acoustic-structural coupled systems. The design variables are volume fractions of inclusion material in a bi-material model constructed by the microstructure-based design domain method (MDDM). The design objective is the minimization of sound pressure level (SPL) in an interior acoustic medium. Sensitivities of SPL with respect to topological design variables are derived concretely by the adjoint method. A relaxed form of optimality criteria (OC) is developed for solving the acoustic-structural coupled optimization problem to find the optimum bi-material distribution. Based on OC and the adjoint method, a topology optimization method to deal with large calculations in acoustic-structural coupled problems is proposed. Numerical examples are given to illustrate the applications of topology optimization for a bi-material plate under a low single-frequency excitation and an aerospace structure under a low frequency-band excitation, and to prove the efficiency of the adjoint method and the relaxed form of OC.

  9. Update on donor assessment, resuscitation, and acceptance criteria, including novel techniques--non-heart-beating donor lung retrieval and ex vivo donor lung perfusion.

    PubMed

    Yeung, Jonathan C; Cypel, Marcelo; Waddell, Thomas K; van Raemdonck, Dirk; Keshavjee, Shaf

    2009-05-01

    The shortage of adequate organ donors remains a great challenge in clinical lung transplantation. With increasing experience in the medical management and surgical technique of lung transplantation, gradual expansion of the criteria for lung donor selection has occurred with beneficial effects on the donor pool. Interest in donation after cardiac death also is increasing as the gap increases between donors and the needs of listed patients. Successful use of these new sources of lungs depends on the accurate assessment and prediction of transplanted lung function. Promising techniques for lung assessment and diagnostics include investigating key genes associated with graft failure or good graft performance using molecular approaches, and ex vivo evaluation. Further studies are needed to answer remaining questions about the best technique and solution to reperfuse human lungs for several hours without edema formation. As the predictive ability to discern good from injured donor lungs improves, strategies to repair donor lungs become increasingly important. Prolonged normothermic EVLP seems to be a platform on which many reparative strategies can be realized. With these new methods for assessing and resuscitating lungs accurately, it is hoped that inroads will be made toward providing every listed patient a chance for successful lung transplantation. PMID:19662970

  10. Perspective: Towards environmentally acceptable criteria for downstream fish passage through mini hydro and irrigation infrastructure in the Lower Mekong River Basin

    SciTech Connect

    Baumgartner, Lee J.; Deng, Zhiqun; Thorncraft, Garry; Boys, Craig A.; Brown, Richard S.; Singhanouvong, Douangkham; Phonekhampeng, Oudom

    2014-02-26

    Tropical rivers have high annual discharges optimal for hydropower and irrigation development. The Mekong River is one of the largest tropical river systems, supporting a unique mega-diverse fish community. Fish are an important commodity in the Mekong, contributing a large proportion of calcium, protein, and essential nutrients to the diet of the local people and providing a critical source of income for rural households. Many of these fish migrate not only upstream and downstream within main-channel habitats but also laterally into highly productive floodplain habitat to both feed and spawn. Most work to date has focused on providing for upstream fish passage, but downstream movement is an equally important process to protect. Expansion of hydropower and irrigation weirs can disrupt downstream migrations and it is important to ensure that passage through regulators or mini hydro systems is not harmful or fatal. Many new infrastructure projects (<6 m head) are proposed for the thousands of tributary streams throughout the Lower Mekong Basin and it is important that designs incorporate the best available science to protect downstream migrants. Recent advances in technology have provided new techniques which could be applied to Mekong fish species to obtain design criteria that can facilitate safe downstream passage. Obtaining and applying this knowledge to new infrastructure projects is essential in order to produce outcomes that are more favorable to local ecosystems and fisheries.

  11. Yield and failure criteria for composite materials under static and dynamic loading

    NASA Astrophysics Data System (ADS)

    Daniel, Isaac M.

    2016-02-01

    To facilitate and accelerate the process of introducing, evaluating and adopting new material systems, it is important to develop/establish comprehensive and effective procedures of characterization, modeling and failure prediction of structural laminates based on the properties of the constituent materials, e. g., fibers, matrix, and the single ply or lamina. A new failure theory, the Northwestern (NU-Daniel) theory, has been proposed for predicting lamina yielding and failure under multi-axial states of stress including strain rate effects. It is primarily applicable to matrix-dominated interfiber/interlaminar failures. It is based on micromechanical failure mechanisms but is expressed in terms of easily measured macroscopic lamina stiffness and strength properties. It is presented in the form of a master failure envelope incorporating strain rate effects. The theory was further adapted and extended to the prediction of in situ first ply yielding and failure (FPY and FPF) and progressive failure of multi-directional laminates under static and dynamic loadings. The significance of this theory is that it allows for rapid screening of new composite materials without extensive testing and offers easily implemented design tools.

  12. Gender Incongruence of Adolescence and Adulthood: Acceptability and Clinical Utility of the World Health Organization’s Proposed ICD-11 Criteria

    PubMed Central

    Beek, Titia F.; Cohen-Kettenis, Peggy T.; Bouman, Walter P.; de Vries, Annelou L. C.; Steensma, Thomas D.; Witcomb, Gemma L.; Arcelus, Jon; Richards, Christina; Elaut, Els; Kreukels, Baudewijntje P. C.

    2016-01-01

    The World Health Organization (WHO) is currently updating the tenth version of their diagnostic tool, the International Classification of Diseases (ICD, WHO, 1992). Changes have been proposed for the diagnosis of Transsexualism (ICD-10) with regard to terminology, placement and content. The aim of this study was to gather the opinions of transgender individuals (and their relatives/partners) and clinicians in the Netherlands, Flanders (Belgium) and the United Kingdom regarding the proposed changes and the clinical applicability and utility of the ICD-11 criteria of ‘Gender Incongruence of Adolescence and Adulthood’ (GIAA). A total of 628 participants were included in the study: 284 from the Netherlands (45.2%), 8 from Flanders (Belgium) (1.3%), and 336 (53.5%) from the UK. Most participants were transgender people (or their partners/relatives) (n = 522), 89 participants were healthcare providers (HCPs) and 17 were both healthcare providers and (partners/relatives of) transgender people. Participants completed an online survey developed for this study. Most participants were in favor of the proposed diagnostic term of ‘Gender Incongruence’ and thought that this was an improvement on the ICD-10 diagnostic term of ‘Transsexualism’. Placement in a separate chapter dealing with Sexual- and Gender-related Health or as a Z-code was preferred by many and only a small number of participants stated that this diagnosis should be excluded from the ICD-11. In the UK, most transgender participants thought there should be a diagnosis related to being trans. However, if it were to be removed from the chapter on “psychiatric disorders”, many transgender respondents indicated that they would prefer it to be removed from the ICD in its entirety. There were no large differences between the responses of the transgender participants (or their partners and relatives) and HCPs. HCPs were generally positive about the GIAA diagnosis; most thought the diagnosis was clearly

  13. Functional design criteria for the Hazardous Materials Management and Emergency Response (HAMMER) Training Center. Revision 1

    SciTech Connect

    Sato, P.K.

    1995-03-10

    Within the United States, there are few hands-on training centers capable of providing integrated technical training within a practical application environment. Currently, there are no training facilities that offer both radioactive and chemical hazardous response training. There are no hands-on training centers that provide training for both hazardous material operations and emergency response that also operate as a partnership between organized labor, state agencies, tribes, and local emergency responders within the US Department of Energy (DOE) complex. Available facilities appear grossly inadequate for training the thousands of people at Hanford, and throughout the Pacific Northwest, who are required to qualify under nationally-mandated requirements. It is estimated that 4,000 workers at the Hanford Site alone need hands-on training. Throughout the Pacific Northwest, the potential target audience would be over 30,000 public sector emergency response personnel, as well as another 10,000 clean-up workers represented by organized labor. The HAMMER Training Center will be an interagency-sponsored training center. It will be designed, built, and operated to ensure that clean-up workers, fire fighters, and public sector management and emergency response personnel are trained to handle accidental spills of hazardous materials. Training will cover wastes at clean-up sites, and in jurisdictions along the transportation corridors, to effectively protect human life, property, and the environment.

  14. Criteria for the Research Institute for Fragrance Materials, Inc. (RIFM) safety evaluation process for fragrance ingredients.

    PubMed

    Api, A M; Belsito, D; Bruze, M; Cadby, P; Calow, P; Dagli, M L; Dekant, W; Ellis, G; Fryer, A D; Fukayama, M; Griem, P; Hickey, C; Kromidas, L; Lalko, J F; Liebler, D C; Miyachi, Y; Politano, V T; Renskers, K; Ritacco, G; Salvito, D; Schultz, T W; Sipes, I G; Smith, B; Vitale, D; Wilcox, D K

    2015-08-01

    The Research Institute for Fragrance Materials, Inc. (RIFM) has been engaged in the generation and evaluation of safety data for fragrance materials since its inception over 45 years ago. Over time, RIFM's approach to gathering data, estimating exposure and assessing safety has evolved as the tools for risk assessment evolved. This publication is designed to update the RIFM safety assessment process, which follows a series of decision trees, reflecting advances in approaches in risk assessment and new and classical toxicological methodologies employed by RIFM over the past ten years. These changes include incorporating 1) new scientific information including a framework for choosing structural analogs, 2) consideration of the Threshold of Toxicological Concern (TTC), 3) the Quantitative Risk Assessment (QRA) for dermal sensitization, 4) the respiratory route of exposure, 5) aggregate exposure assessment methodology, 6) the latest methodology and approaches to risk assessments, 7) the latest alternatives to animal testing methodology and 8) environmental risk assessment. The assessment begins with a thorough analysis of existing data followed by in silico analysis, identification of 'read across' analogs, generation of additional data through in vitro testing as well as consideration of the TTC approach. If necessary, risk management may be considered.

  15. Criteria for the Research Institute for Fragrance Materials, Inc. (RIFM) safety evaluation process for fragrance ingredients.

    PubMed

    Api, A M; Belsito, D; Bruze, M; Cadby, P; Calow, P; Dagli, M L; Dekant, W; Ellis, G; Fryer, A D; Fukayama, M; Griem, P; Hickey, C; Kromidas, L; Lalko, J F; Liebler, D C; Miyachi, Y; Politano, V T; Renskers, K; Ritacco, G; Salvito, D; Schultz, T W; Sipes, I G; Smith, B; Vitale, D; Wilcox, D K

    2015-08-01

    The Research Institute for Fragrance Materials, Inc. (RIFM) has been engaged in the generation and evaluation of safety data for fragrance materials since its inception over 45 years ago. Over time, RIFM's approach to gathering data, estimating exposure and assessing safety has evolved as the tools for risk assessment evolved. This publication is designed to update the RIFM safety assessment process, which follows a series of decision trees, reflecting advances in approaches in risk assessment and new and classical toxicological methodologies employed by RIFM over the past ten years. These changes include incorporating 1) new scientific information including a framework for choosing structural analogs, 2) consideration of the Threshold of Toxicological Concern (TTC), 3) the Quantitative Risk Assessment (QRA) for dermal sensitization, 4) the respiratory route of exposure, 5) aggregate exposure assessment methodology, 6) the latest methodology and approaches to risk assessments, 7) the latest alternatives to animal testing methodology and 8) environmental risk assessment. The assessment begins with a thorough analysis of existing data followed by in silico analysis, identification of 'read across' analogs, generation of additional data through in vitro testing as well as consideration of the TTC approach. If necessary, risk management may be considered. PMID:25510979

  16. The Effect of Contextual Material on Evolution in the Jordanian Secondary-School Curriculum on Students' Acceptance of the Theory of Evolution

    ERIC Educational Resources Information Center

    De Baz, Theodora; El-Weher, Mahmoud

    2012-01-01

    The purpose of this study was to detect the extent to which contextual material of a unit on "The origin and evolution of living organisms" included in the high-school biology curriculum in Jordan affected students' acceptance of the theory of evolution. The participants of this study consisted of 107 tenth-grade students randomly drawn from three…

  17. Criteria for initiation of delamination in quasi-static punch-shear tests of a carbon-fiber composite material.

    SciTech Connect

    Chin, Eric Brian; English, Shawn Allen; Briggs, Timothy

    2015-09-01

    V arious phenomenological delamination initiation criteria are analyzed in quasi - static punch - shear tests conducted on six different geometries. These six geometries are modeled and analyzed using elastic, large - deformation finite element analysis. Analysis output is post - processed to assess different delamination initiation criteria, and their applicability to each of the geometries. These criteria are compared to test results to assess whether or not they are appropriate based on what occurred in testing. Further, examinations of CT scans and ultrasonic images o f test specimens are conducted in the appendix to determine the sequence of failure in each test geometry.

  18. DOE natural phenomenal hazards design and evaluation criteria

    SciTech Connect

    Murray, R.C.; Nelson, T.A.; Short, S.A.; Kennedy, R.P.; Chander, H.; Hill, J.R.; Kimball, J.K.

    1994-10-01

    It is the policy of the Department of Energy (DOE) to design, construct, and operate DOE facilities so that workers, the general public, and the environment are protected from the impacts of natural phenomena hazards (NPH). Furthermore, DOE has established explicit goals of acceptable risk for NPH performance. As a result, natural phenomena hazard (earthquake, extreme wind, and flood) design and evaluation criteria for DOE facilities have been developed based on target probabilistic performance goals. These criteria include selection of design/evaluation NPH input from probabilistic hazard curves combined with commonly practiced deterministic response evaluation methods and acceptance criteria with controlled levels of conservatism. For earthquake considerations, conservatism is intentionally introduced in specification of material strengths and capacities, in the allowance of limited inelastic behavior, and by a seismic scale factor. Criteria have been developed following a graded approach for several performance goals ranging from that appropriate for normal-use facilities to that appropriate for facilities involving hazardous or critical operations. Performance goals are comprised of qualitative expressions of acceptable behavior and of target quantitative probabilities that acceptable limits of behavior are maintained. The criteria are simple procedures but have a rigorous basis. This paper addresses DOE seismic design and evaluation criteria.

  19. 49 CFR 175.703 - Other special requirements for the acceptance and carriage of packages containing Class 7 materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... cooling system or packages subject to operational controls during transport; or (2) Liquid pyrophoric Class 7 (radioactive) materials. (d) Packages with radiation levels at the package surface or...

  20. 49 CFR 175.703 - Other special requirements for the acceptance and carriage of packages containing Class 7 materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... cooling system or packages subject to operational controls during transport; or (2) Liquid pyrophoric Class 7 (radioactive) materials. (d) Packages with radiation levels at the package surface or...

  1. 49 CFR 175.703 - Other special requirements for the acceptance and carriage of packages containing Class 7 materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... cooling system or packages subject to operational controls during transport; or (2) Liquid pyrophoric Class 7 (radioactive) materials. (d) Packages with radiation levels at the package surface or...

  2. 49 CFR 175.703 - Other special requirements for the acceptance and carriage of packages containing Class 7 materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... cooling system or packages subject to operational controls during transport; or (2) Liquid pyrophoric Class 7 (radioactive) materials. (d) Packages with radiation levels at the package surface or...

  3. Plutonium storage criteria

    SciTech Connect

    Chung, D.; Ascanio, X.

    1996-05-01

    The Department of Energy has issued a technical standard for long-term (>50 years) storage and will soon issue a criteria document for interim (<20 years) storage of plutonium materials. The long-term technical standard, {open_quotes}Criteria for Safe Storage of Plutonium Metals and Oxides,{close_quotes} addresses the requirements for storing metals and oxides with greater than 50 wt % plutonium. It calls for a standardized package that meets both off-site transportation requirements, as well as remote handling requirements from future storage facilities. The interim criteria document, {open_quotes}Criteria for Interim Safe Storage of Plutonium-Bearing Solid Materials{close_quotes}, addresses requirements for storing materials with less than 50 wt% plutonium. The interim criteria document assumes the materials will be stored on existing sites, and existing facilities and equipment will be used for repackaging to improve the margin of safety.

  4. Criteria for Developing Criteria Sets.

    ERIC Educational Resources Information Center

    Martin, James L.

    Criteria sets are a necessary step in the systematic development of evaluation in education. Evaluation results from the combination of criteria and evidence. There is a need to develop explicit tools for evaluating criteria, similar to those used in evaluating evidence. The formulation of such criteria depends on distinguishing between terms…

  5. Effect of Ethanol and Methyl-tert-Butyl Ether on Monoaromatic Hydrocarbon Biodegradation: Response Variability for Different Aquifer Materials Under Various Electron-Accepting Conditions

    SciTech Connect

    Ruiz-Aguilar, G L; Fernandez-Sanchez, J M; Kane, S R; Kim, D; Alvarez, P J

    2003-10-06

    Aquifer microcosms were used to determine how ethanol and methyl-tert-butyl ether (MtBE) affect monoaromatic hydrocarbon degradation under different electron-accepting conditions commonly found in contaminated sites experiencing natural attenuation. Response variability was investigated by using aquifer material from four sites with different exposure history. The lag phase prior to BTEX (benzene, toluene, ethylbenzene, and xylenes) and ethanol degradation was typically shorter in microcosms with previously contaminated aquifer material, although previous exposure did not always result in high degradation activity. Toluene was degraded in all aquifer materials and generally under a broader range of electron-accepting conditions compared to benzene, which was degraded only under aerobic conditions. MtBE was not degraded within 100 days under any condition, and it did not affect BTEX or ethanol degradation patterns. Ethanol was often degraded before BTEX compounds, and had a variable effect on BTEX degradation as a function of electron-accepting conditions and aquifer material source. An occasional enhancement of toluene degradation by ethanol occurred in denitrifying microcosms with unlimited nitrate; this may be attributable to the fortuitous growth of toluene-degrading bacteria during ethanol degradation. Nevertheless, experiments with flow-through aquifer columns showed that this beneficial effect could be eclipsed by an ethanol-driven depletion of electron acceptors, which significantly inhibited BTEX degradation and is probably the most important mechanism by which ethanol could hinder BTEX natural attenuation. A decrease in natural attenuation could increase the likelihood that BTEX compounds reach a receptor as well as the potential duration of exposure.

  6. Ladder-type pentaphenylenes and their polymers: efficient blue-light emitters and electron-accepting materials via a common intermediate.

    PubMed

    Jacob, Josemon; Sax, Stefan; Piok, Thomas; List, Emil J W; Grimsdale, Andrew C; Müllen, Klaus

    2004-06-01

    A new route to ladder-type pentaphenylenes has been developed in which both good hole-accepting p-type and electron-accepting n-type materials can be prepared from a common intermediate. This key intermediate is a pentaphenylene diester 5 obtained in high yield by Suzuki coupling of 2 equiv of fluorene boronates with 2,5-dibromoterephthalate. Addition of aryllithium followed by ring closure with boron trifluoride produced a blue-emitting ladder-type pentaphenylene. Bromination followed by reductive polymerization with nickel(0) gave new high molecular mass polymers, which show efficient blue emission with a very small Stokes shift. These polymers bridge the gap in emission between polyfluorenes and fully ladder-type polyphenylenes. An alternative ring closure of the dibromopentaphenylene diester 14 with acid made a diketone that is a good electron-accepting material, as it displays a reversible two-electron reduction. The reduction onset potential of -0.875 V against Ag/Ag(+) corresponds to a lowest unoccupied molecular orbital (LUMO) energy level of 3.53 eV, comparable to the work function of magnesium, suggesting that this unit could be used to greatly increase the injection of electrons into polymers containing it in a light-emitting diode (LED) or solar cell. A red-emitting material was prepared by Suzuki coupling of the dibromopentaphenylene 10b with a perylene dye, thus offering the prospect of tuning the emission from pentaphenylene materials over the whole visible range by attachment of suitable dyes. Unoptimized single-layer organic LEDs that used 11b showed stable pure-blue emission with brightnesses of over 200 cd/m(2) at 7 V, with moderate efficiencies. PMID:15174868

  7. Regulatory applications of sediment criteria. Final report

    SciTech Connect

    Not Available

    1987-06-23

    The report briefly describes the development of sediment criteria, discusses their utility and appropriate regulatory applications, and recommends steps to enhance the acceptance of sediment criteria by the regulatory and regulated communities.

  8. A single reflection approach to HCPV: Very high concentration ratio and wide acceptance angles using low cost materials

    NASA Astrophysics Data System (ADS)

    De Nardis, Davide

    2012-10-01

    The Italian engineering company Becar (Beghelli SpA group) presents its latest HCPV module currently sold under the brand name "Life Tree". The module is characterized by an efficiency of 26% that is in line with systems having higher complexity. The high efficiency and flexibility of the system are reached thanks to the single reflection scheme of the optical system. The module characterized by high acceptance angles comprises a metalized plastic primary reflector and a secondary optical element. The latter being a crucial technical feature of the Becar's system. This secondary optic element has been developed and manufactured by the German group Evonik Industries, which markets the product under the trade name SAVOSIL(TM). This technology, compared to other optics available in the market, offer high transparency in the whole solar spectrum and it is manufactured with an innovative sol-gel process that guarantees a precision in the micron range, at a fraction of the other approaches cost . Those two important features boost the light harvesting power of the Beghelli's systems. The article shows also the results of extensive in-field tests carried out to confirm reliability, performance and easy maintenance of the system.

  9. Performance Criteria: Concrete, Volume 1.

    ERIC Educational Resources Information Center

    Hallenbeck, Roger F.; And Others

    The State University Construction Fund provides guidance and direction to professionals participating in its program by issuing performance criteria that set forth owner or user requirements. This document provides guidelines in the form of performance criteria, testing procedures, and instructions to achieve an acceptable level of performance in…

  10. Small D-π-A systems with o-phenylene-bridged accepting units as active materials for organic photovoltaics.

    PubMed

    Leliège, Antoine; Grolleau, Jérémie; Allain, Magali; Blanchard, Philippe; Demeter, Dora; Rousseau, Théodulf; Roncali, Jean

    2013-07-22

    Donor-acceptor (D-π-A) systems that combine triarylamine donor blocks and dicyanovinyl (DCV) acceptor groups have been synthesized. Starting from the triphenylamine (TPA)-thiophene-DCV compound (1) as a reference system, various synthetic approaches have been developed for controlling the light-harvesting properties and energy levels of the frontier orbitals in this molecule. Thus, the introduction of methoxy groups onto TPA, the replacement of one phenyl ring of TPA by a thiophene ring, or the extension of the π-conjugating spacer group lead to the modulation of the HOMO level. On the other hand, the fusion of the DCV group onto the vicinal thiophene ring by an ortho-phenylene bridge allows for a specific fine-tuning of the LUMO level. The electronic properties of the molecules were analyzed by using UV/Vis spectroscopy and cyclic voltammetry and the compounds were evaluated as donor materials in basic bilayer planar heterojunction solar cells by using C60 as acceptor material. The relationships between the electronic properties of the donors and the performance of the corresponding photovoltaic devices are discussed. Bilayer planar heterojunction solar cells that used reference compound 1 and C70 afforded power-conversion efficiencies of up to 3.7 %.

  11. Recommendations for conducting controlled clinical studies of dental restorative materials. Science Committee Project 2/98--FDI World Dental Federation study design (Part I) and criteria for evaluation (Part II) of direct and indirect restorations including onlays and partial crowns.

    PubMed

    Hickel, Reinhard; Roulet, Jean-François; Bayne, Stephen; Heintze, Siegward D; Mjör, Ivar A; Peters, Mathilde; Rousson, Valentin; Randall, Ros; Schmalz, Gottfried; Tyas, Martin; Vanherle, Guido

    2007-01-01

    About 35 years ago, Ryge provided a practical approach to the evaluation of the clinical performance of restorative materials. This systematic approach was soon universally accepted. While that methodology has served us well, a large number of scientific methodologies and more detailed questions have arisen that require more rigor. Current restorative materials have vastly improved clinical performance, and any changes over time are not easily detected by the limited sensitivity of the Ryge criteria in short-term clinical investigations. However, the clinical evaluation of restorations not only involves the restorative material per se but also different operative techniques. For instance, a composite resin may show good longevity data when applied in conventional cavities but not in modified operative approaches. Insensitivity, combined with the continually evolving and nonstandard investigator modifications of the categories, scales, and reporting methods, has created a body of literature that is extremely difficult to interpret meaningfully. In many cases, the insensitivity of the original Ryge methods leads to misinterpretation as good clinical performance. While there are many good features of the original system, it is now time to move on to a more contemporary one. The current review approaches this challenge in two ways: (1) a proposal for a modern clinical testing protocol for controlled clinical trials, and (2) an in-depth discussion of relevant clinical evaluation parameters, providing 84 references that are primarily related to issues or problems for clinical research trials. Together, these two parts offer a standard for the clinical testing of restorative materials/procedures and provide significant guidance for research teams in the design and conduct of contemporary clinical trials. Part 1 of the review considers the recruitment of subjects, restorations per subject, clinical events, validity versus bias, legal and regulatory aspects, rationales for

  12. 10 CFR 72.104 - Criteria for radioactive materials in effluents and direct radiation from an ISFSI or MRS.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... radiation from an ISFSI or MRS. 72.104 Section 72.104 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED... materials in effluents and direct radiation from an ISFSI or MRS. (a) During normal operations and... radioactive materials, radon and its decay products excepted, to the general environment, (2) Direct...

  13. 10 CFR 72.104 - Criteria for radioactive materials in effluents and direct radiation from an ISFSI or MRS.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... radiation from an ISFSI or MRS. 72.104 Section 72.104 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED... materials in effluents and direct radiation from an ISFSI or MRS. (a) During normal operations and... radioactive materials, radon and its decay products excepted, to the general environment, (2) Direct...

  14. 10 CFR 72.104 - Criteria for radioactive materials in effluents and direct radiation from an ISFSI or MRS.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... radiation from an ISFSI or MRS. 72.104 Section 72.104 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED... materials in effluents and direct radiation from an ISFSI or MRS. (a) During normal operations and... radioactive materials, radon and its decay products excepted, to the general environment, (2) Direct...

  15. 10 CFR 72.104 - Criteria for radioactive materials in effluents and direct radiation from an ISFSI or MRS.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... radiation from an ISFSI or MRS. 72.104 Section 72.104 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED... materials in effluents and direct radiation from an ISFSI or MRS. (a) During normal operations and... radioactive materials, radon and its decay products excepted, to the general environment, (2) Direct...

  16. 10 CFR 72.104 - Criteria for radioactive materials in effluents and direct radiation from an ISFSI or MRS.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... radiation from an ISFSI or MRS. 72.104 Section 72.104 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED... materials in effluents and direct radiation from an ISFSI or MRS. (a) During normal operations and... radioactive materials, radon and its decay products excepted, to the general environment, (2) Direct...

  17. An assessment of electric vehicles: technology, infrastructure requirements, greenhouse-gas emissions, petroleum use, material use, lifetime cost, consumer acceptance and policy initiatives.

    PubMed

    Delucchi, M A; Yang, C; Burke, A F; Ogden, J M; Kurani, K; Kessler, J; Sperling, D

    2014-01-13

    Concerns about climate change, urban air pollution and dependence on unstable and expensive supplies of foreign oil have led policy-makers and researchers to investigate alternatives to conventional petroleum-fuelled internal-combustion-engine vehicles in transportation. Because vehicles that get some or all of their power from an electric drivetrain can have low or even zero emissions of greenhouse gases (GHGs) and urban air pollutants, and can consume little or no petroleum, there is considerable interest in developing and evaluating advanced electric vehicles (EVs), including pure battery-electric vehicles, plug-in hybrid electric vehicles and hydrogen fuel-cell electric vehicles. To help researchers and policy-makers assess the potential of EVs to mitigate climate change and reduce petroleum use, this paper discusses the technology of EVs, the infrastructure needed for their development, impacts on emissions of GHGs, petroleum use, materials use, lifetime costs, consumer acceptance and policy considerations. PMID:24298079

  18. An assessment of electric vehicles: technology, infrastructure requirements, greenhouse-gas emissions, petroleum use, material use, lifetime cost, consumer acceptance and policy initiatives.

    PubMed

    Delucchi, M A; Yang, C; Burke, A F; Ogden, J M; Kurani, K; Kessler, J; Sperling, D

    2014-01-13

    Concerns about climate change, urban air pollution and dependence on unstable and expensive supplies of foreign oil have led policy-makers and researchers to investigate alternatives to conventional petroleum-fuelled internal-combustion-engine vehicles in transportation. Because vehicles that get some or all of their power from an electric drivetrain can have low or even zero emissions of greenhouse gases (GHGs) and urban air pollutants, and can consume little or no petroleum, there is considerable interest in developing and evaluating advanced electric vehicles (EVs), including pure battery-electric vehicles, plug-in hybrid electric vehicles and hydrogen fuel-cell electric vehicles. To help researchers and policy-makers assess the potential of EVs to mitigate climate change and reduce petroleum use, this paper discusses the technology of EVs, the infrastructure needed for their development, impacts on emissions of GHGs, petroleum use, materials use, lifetime costs, consumer acceptance and policy considerations.

  19. Development and use of statistical survey criteria for release of materials at a former uranium processing facility.

    PubMed

    Green, S; Miller, R H; Nelson, R A

    1991-12-01

    To minimize the amount of waste and to recover reusable resources during demolition of radioactively contaminated facilities, building construction material and equipment can be efficiently and successfully surveyed using statistical methods described in this article. A radioactive contamination survey strategy aimed at reducing survey technician labor while still providing assurance that only uncontaminated material is released for salvage is discussed. Provided is the survey method, rationale, and results of three case studies where this method was successfully employed at a former uranium processing facility.

  20. 75 FR 54917 - Criteria for Nominating Materials Licensees for the U.S. Nuclear Regulatory Commission's Agency...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-09

    ...) Significant Issue or Event--Licensee has an issue or event that results in an abnormal occurrence report to... performance that warrant additional NRC oversight (e.g., a significant event, which requires an incident... materials licensees with significant performance issues: (1) Strategic Plan--Licensee has an event...

  1. Comparison of the order of magnetic phase transitions in several magnetocaloric materials using the rescaled universal curve, Banerjee and mean field theory criteria

    SciTech Connect

    Burrola-Gándara, L. A. Santillan-Rodriguez, C. R.; Rivera-Gomez, F. J.; Saenz-Hernandez, R. J.; Botello-Zubiate, M. E.; Matutes-Aquino, J. A.

    2015-05-07

    Magnetocaloric materials with second order phase transition near the Curie temperature can be described by critical phenomena theory. In this theory, scaling, universality, and renormalization are key concepts from which several phase transition order criteria are derived. In this work, the rescaled universal curve, Banerjee and mean field theory criteria were used to make a comparison for several magnetocaloric materials including pure Gd, SmCo{sub 1.8}Fe{sub 0.2}, MnFeP{sub 0.46}As{sub 0.54}, and La{sub 0.7}Ca{sub 0.15}Sr{sub 0.15}MnO{sub 3}. Pure Gd, SmCo{sub 1.8}Fe{sub 0.2}, and La{sub 0.7}Ca{sub 0.15}Sr{sub 0.15}MnO{sub 3} present a collapse of the rescaled magnetic entropy change curves into a universal curve, which indicates a second order phase transition; applying Banerjee criterion to H/σ vs σ{sup 2} Arrot plots and the mean field theory relation |ΔS{sub M}| ∝ (μ{sub 0}H/T{sub c}){sup 2/3} for the same materials also determines a second order phase transition. However, in the MnFeP{sub 0.46}As{sub 0.54} sample, the Banerjee criterion applied to the H/σ vs σ{sup 2} Arrot plot indicates a first order magnetic phase transition, while the mean field theory prediction for a second order phase transition, |ΔS{sub M}| ∝ (μ{sub 0}H/T{sub c}){sup 2/3}, describes a second order behavior. Also, a mixture of first and second order behavior was indicated by the rescaled universal curve criterion. The diverse results obtained for each criterion in MnFeP{sub 0.46}As{sub 0.54} are apparently related to the magnetoelastic effect and to the simultaneous presence of weak and strong magnetism in Fe (3f) and Mn (3g) alternate atomic layers, respectively. The simultaneous application of the universal curve, the Banerjee and the mean field theory criteria has allowed a better understanding about the nature of the order of the phase transitions in different magnetocaloric materials.

  2. Material Selection for an Ultra High Strength Steel Component Based on the Failure Criteria of CrachFEM

    SciTech Connect

    Kessler, L.; Beier, Th.; Werner, H.; Horstkott, D.; Dell, H.; Gese, H.

    2005-08-05

    An increasing use of combining more than one process step is noticed for coupling crash simulations with the results of forming operations -- mostly by inheriting the forming history like plastic strain and material hardening. Introducing a continuous failure model allows a further benefit of these coupling processes; it sometimes can even be the most attractive result of such a work. In this paper the algorithm CrachFEM for fracture prediction has been used to generate more benefit of the successive forming and crash simulations -- especially for ultra high strength steels. The choice and selection of the material grade in combination with the component design can therefore be done far before the prototyping might show an unsuccessful crash result; and in an industrial applicable manner.

  3. Monitoring Reading Behavior: Criteria for Performance.

    ERIC Educational Resources Information Center

    Powell, William R.

    Effective use of the informal reading inventory (IRI) depends upon the criteria used in determining the functional reading levels and more specifically the word recognition criteria employed in describing acceptable limits of oral reading behavior. The author of this paper looks at the diverse sets of criteria commonly used, the problems…

  4. International Fusion Materials Irradiation Facility injector acceptance tests at CEA/Saclay: 140 mA/100 keV deuteron beam characterization.

    PubMed

    Gobin, R; Bogard, D; Cara, P; Chauvin, N; Chel, S; Delferrière, O; Harrault, F; Mattei, P; Mosnier, A; Senée, F; Shidara, H; Okumura, Y

    2014-02-01

    In the framework of the ITER broader approach, the International Fusion Materials Irradiation Facility (IFMIF) deuteron accelerator (2 × 125 mA at 40 MeV) is an irradiation tool dedicated to high neutron flux production for future nuclear plant material studies. During the validation phase, the Linear IFMIF Prototype Accelerator (LIPAc) machine will be tested on the Rokkasho site in Japan. This demonstrator aims to produce 125 mA/9 MeV deuteron beam. Involved in the LIPAc project for several years, specialists from CEA/Saclay designed the injector based on a SILHI type ECR source operating at 2.45 GHz and a 2 solenoid low energy beam line to produce such high intensity beam. The whole injector, equipped with its dedicated diagnostics, has been then installed and tested on the Saclay site. Before shipment from Europe to Japan, acceptance tests have been performed in November 2012 with 100 keV deuteron beam and intensity as high as 140 mA in continuous and pulsed mode. In this paper, the emittance measurements done for different duty cycles and different beam intensities will be presented as well as beam species fraction analysis. Then the reinstallation in Japan and commissioning plan on site will be reported.

  5. International Fusion Materials Irradiation Facility injector acceptance tests at CEA/Saclay: 140 mA/100 keV deuteron beam characterization

    SciTech Connect

    Gobin, R. Bogard, D.; Chauvin, N.; Chel, S.; Delferrière, O.; Harrault, F.; Mattei, P.; Senée, F.; Mosnier, A.; Shidara, H.

    2014-02-15

    In the framework of the ITER broader approach, the International Fusion Materials Irradiation Facility (IFMIF) deuteron accelerator (2 × 125 mA at 40 MeV) is an irradiation tool dedicated to high neutron flux production for future nuclear plant material studies. During the validation phase, the Linear IFMIF Prototype Accelerator (LIPAc) machine will be tested on the Rokkasho site in Japan. This demonstrator aims to produce 125 mA/9 MeV deuteron beam. Involved in the LIPAc project for several years, specialists from CEA/Saclay designed the injector based on a SILHI type ECR source operating at 2.45 GHz and a 2 solenoid low energy beam line to produce such high intensity beam. The whole injector, equipped with its dedicated diagnostics, has been then installed and tested on the Saclay site. Before shipment from Europe to Japan, acceptance tests have been performed in November 2012 with 100 keV deuteron beam and intensity as high as 140 mA in continuous and pulsed mode. In this paper, the emittance measurements done for different duty cycles and different beam intensities will be presented as well as beam species fraction analysis. Then the reinstallation in Japan and commissioning plan on site will be reported.

  6. Rock magnetic evidence of non-random raw material selection criteria in Cerro Toledo Obsidian Artifacts from Valles Caldera, New Mexico

    NASA Astrophysics Data System (ADS)

    Gregovich, A.; Feinberg, J. M.; Steffen, A.; Sternberg, R. S.

    2014-12-01

    Stone tools are one of the most enduring forms of ancient human behavior available to anthropologists. The geologic materials that comprise stone tools are a reflection of the rocks that were available locally or through trade, as are the intended use of the tools and the knapping technology needed to produce them. Investigation of the rock magnetic and geochemical characteristics of the artifacts and the geological source materials provides a baseline to explore these past behaviors. This study uses rock magnetic properties to explore the raw material selection criteria involved in the production of obsidian tools in the region around Valles Caldera in northern New Mexico. Obsidian is locally abundant and was traded by tribes across the central United States. Here we compare the rock magnetic properties of a sample of obsidian projectile points (N =25) that have been geochemically sourced to the Cerro Toledo obsidian flow with geological samples collected from four sites within the same flow (N =135). This collection of archaeological artifacts, albeit small, contains representatives of at least 8 different point styles that were used over 6000 years from the Archaic into the Late Prehistoric. Bulk rock hysteresis parameters (Mr, Ms, Bc, and Bcr) and low-field susceptibility (Χ) measurements show that the projectile points generally contain a lower concentration of magnetic minerals than the geologic samples. For example, the artifacts' median Ms value is 2.9 x 10-3 Am2kg-1, while that of the geological samples is 6.5 x 10-3 Am2kg-1. The concentration of magnetic minerals in obsidian is a proxy for the concentration of microlites in general, and this relationship suggests that although obsidian was locally abundant, toolmakers employed non-random selection criteria resulting in generally lower concentrations of microlites in their obsidian tools.

  7. 46 CFR 160.062-3 - Materials, construction, workmanship, and performance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    .... Lifesaving Equipment, Hydraulic and Manual § 160.062-3 Materials, construction, workmanship, and performance... this subpart. In addition, all metals and materials used in a hydraulic release must be compatible with... coating on the parts of a hydraulic release are not acceptable. The criteria for accepting any...

  8. Development of materials screening tests for oxygen-enriched environments

    NASA Technical Reports Server (NTRS)

    Johnston, R. L.; Pippen, D. L.

    1971-01-01

    The criteria governing materials to be used in an oxygen enriched atmosphere and tests to determine suitability for fireproof considerations in spacecraft design are discussed. The nine tests applied to materials before acceptance in spacecraft construction are presented. The application of the standard tests to determine ranking of materials is included.

  9. Crew Transportation Technical Standards and Design Evaluation Criteria

    NASA Technical Reports Server (NTRS)

    Lueders, Kathryn L.; Thomas, Rayelle E. (Compiler)

    2015-01-01

    Crew Transportation Technical Standards and Design Evaluation Criteria contains descriptions of technical, safety, and crew health medical processes and specifications, and the criteria which will be used to evaluate the acceptability of the Commercial Providers' proposed processes and specifications.

  10. Design criteria for maglev structures

    SciTech Connect

    Sandberg, H.R.; Williams, J.R.

    1997-05-01

    Maglev systems represent an entirely new concept in transportation. They will not operate on nor share the right-of-way with any other system. It is important, therefore, that the guideways be designed and constructed so as to be economical, constructable, durable, adaptable, reliable, and readily maintained. Comparisons should be made with the current transportation systems, especially highways and railroads. Since most of the guideway will be elevated, the comparison should be with the bridges. The object of the comparisons should be to avoid the shortcomings of the other systems while building on their strengths. This paper develops in some detail design and construction criteria that will ensure a good, long-lived performance of the maglev guideway. The importance of beauty should have a low priority in comparison to the other design criteria. Clean, simple details meeting other criteria will ensure an acceptable appearance. These criteria were used in evaluating the four maglev concepts developed for the National Maglev Initiative.

  11. An interim report on the materials and selection criteria analysis for the Compact Ignition Tokamak Toroidal Field Coil Turn-to-Turn Insulation System

    SciTech Connect

    Campbell, V.W.; Dooley, J.B.; Hubrig, J.G.; Janke, C.J.; McManamy, T.J.; Welch, D.E.

    1990-01-01

    Design criteria for the Compact Ignition Tokamak, Toroidal-Field (TF) Coil, Turn-to-Turn Insulation System require an insulation sheet and bonding system that will survive cryogenic cycling in a radiation environment and maintain structural integrity during exposure to the significant compressive and shear loads associated with each operating cycle. For thermosetting resin systems, a complex interactive dependency exists between optimum peak value, in-service property performance capabilities of candidate generic materials; key handling and processing parameters required to achieve their optimum in-service property performance as an insulation system; and suitability of their handling and processing parameters as a function of design configuration and assembly methodology. This dependency is assessed in a weighted study matrix in which two principal programmatic approaches for the development of the TF Coil Subassembly Insulation System have been identified. From this matrix study, two viable approaches to the fabrication of the insulation sheet were identified: use of a press-formed sheet bonded in place with epoxy for mechanical bonding and tolerance take-up and formation of the insulation sheet by placement of dry cloth and subsequent vacuum pressure impregnation. Laboratory testing was conducted to screen a number of combinations of resins and hardeners on a generic basis. These combinations were chosen for their performance in similar applications. Specimens were tested to screen viscosity, thermal-shock tolerance, and cryogenic tolerance. Cryogenic shock and cryogenic temperature proved to be extremely lethal to many combinations of resin, hardener, and cure. Two combinations survived: a heavily flexibilized bisphenol A resin with a flexibilized amine hardener and a bisphenol A resin with cycloaliphatic amine hardener. 7 refs., 12 figs., 6 tabs.

  12. Space Tethers: Design Criteria

    NASA Technical Reports Server (NTRS)

    Tomlin, D. D.; Faile, G. C.; Hayashida, K. B.; Frost, C. L.; Wagner, C. Y.; Mitchell, M. L.; Vaughn, J. A.; Galuska, M. J.

    1997-01-01

    This document is prepared to provide a systematic process for the selection of tethers for space applications. Criteria arc provided for determining the strength requirement for tether missions and for mission success from tether severing due to micrometeoroids and orbital debris particle impacts. Background information of materials for use in space tethers is provided, including electricity-conducting tethers. Dynamic considerations for tether selection is also provided. Safety, quality, and reliability considerations are provided for a tether project.

  13. Survival of ART restorations assessed using selected FDI and modified ART restoration criteria.

    PubMed

    Farag, Abeer; van der Sanden, Wil J M; Abdelwahab, Hisran; Frencken, Jo E

    2011-06-01

    A new set of criteria for assessing the quality of restorations using modern restorative materials, named FDI criteria, was recently introduced. This study tested the null hypothesis that there is no significant difference in survival estimate percentages of ART restorations assessed using selected FDI and modified ART criteria after 1 and 5 years. One operator placed a total of 60 class I and 30 Class II high-viscosity glass-ionomer ART restorations in ninety 14- to 15-year-olds. Two calibrated and independent evaluators using both criteria evaluated restorations on diestone replicas at baseline and after 1 and 5 years. Statistical analyses were done using the Kaplan-Meier method and log-rank test. The survival results of ART restorations assessed using both sets of criteria after 1 and 5 years (p = 0.27) did not differ significantly. Three ART restorations were assessed as failures according to the ART criteria, while they were assessed as survived using the FDI criteria. We conclude that the modified ART criteria enable reliable assessment of ART restorations in permanent teeth from diestone replicas and that there was no significant difference in survival estimates of ART restorations assessed using both sets of criteria. The null hypothesis was accepted.

  14. Seismic design and evaluation criteria based on target performance goals

    SciTech Connect

    Murray, R.C.; Nelson, T.A.; Kennedy, R.P.; Short, S.A.

    1994-04-01

    The Department of Energy utilizes deterministic seismic design/evaluation criteria developed to achieve probabilistic performance goals. These seismic design and evaluation criteria are intended to apply equally to the design of new facilities and to the evaluation of existing facilities. In addition, the criteria are intended to cover design and evaluation of buildings, equipment, piping, and other structures. Four separate sets of seismic design/evaluation criteria have been presented each with a different performance goal. In all these criteria, earthquake loading is selected from seismic hazard curves on a probabilistic basis but seismic response evaluation methods and acceptable behavior limits are deterministic approaches with which design engineers are familiar. For analytical evaluations, conservatism has been introduced through the use of conservative inelastic demand-capacity ratios combined with ductile detailing requirements, through the use of minimum specified material strengths and conservative code capacity equations, and through the use of a seismic scale factor. For evaluation by testing or by experience data, conservatism has been introduced through the use of an increase scale factor which is applied to the prescribed design/evaluation input motion.

  15. Quantum cryptography: Security criteria reexamined

    SciTech Connect

    Kaszlikowski, Dagomir; Liang, Y.C.; Englert, Berthold-Georg; Gopinathan, Ajay; Kwek, L.C.

    2004-09-01

    We find that the generally accepted security criteria are flawed for a whole class of protocols for quantum cryptography. This is so because a standard assumption of the security analysis, namely that the so-called square-root measurement is optimal for eavesdropping purposes, is not true in general. There are rather large parameter regimes in which the optimal measurement extracts substantially more information than the square-root measurement.

  16. 10 CFR 710.8 - Criteria.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Criteria. 710.8 Section 710.8 Energy DEPARTMENT OF ENERGY CRITERIA AND PROCEDURES FOR DETERMINING ELIGIBILITY FOR ACCESS TO CLASSIFIED MATTER OR SPECIAL NUCLEAR... Special Nuclear Material Criteria and Procedures for Determining Eligibility for Access to...

  17. 10 CFR 710.8 - Criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Criteria. 710.8 Section 710.8 Energy DEPARTMENT OF ENERGY CRITERIA AND PROCEDURES FOR DETERMINING ELIGIBILITY FOR ACCESS TO CLASSIFIED MATTER OR SPECIAL NUCLEAR... Special Nuclear Material Criteria and Procedures for Determining Eligibility for Access to...

  18. 10 CFR 710.8 - Criteria.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Criteria. 710.8 Section 710.8 Energy DEPARTMENT OF ENERGY CRITERIA AND PROCEDURES FOR DETERMINING ELIGIBILITY FOR ACCESS TO CLASSIFIED MATTER OR SPECIAL NUCLEAR... Special Nuclear Material Criteria and Procedures for Determining Eligibility for Access to...

  19. Acceptance criteria for reactor coolant pumps and valves

    SciTech Connect

    Gupta, N.K.; Miller, R.F.; Sindelar, R.L.

    1993-05-01

    Each of the six primary coolant loop systems of the Savannah River Site (SRS) production reactors contains one reactor coolant pump, one PUMP suction side motor operated valve, and other smaller valves. The pumps me double suction, double volute, and radially split type pumps. The valves are different size shutoff and control valves rated from ANSI B16.5 construction class 150 to class 300. The reactor coolant system components, also known as the process water system (PWS), are classified as nuclear Safety Class I components. These components were constructed in the 1950`s in accordance with the then prevailing industry practices. No uniform construction codes were used for design and analysis of these components. However, no pressure boundary failures or bolting failures have ever been recorded throughout their operating history. Over the years, the in-service inspection (ISI) was limited to visual inspection of the pressure boundaries, and surface and volumetric examination of the pressure retaining bolts. Efforts are now underway to implement ISI requirements similar to the ASME Section XI requirements for pumps and valves. This report discusses the new ISI requirements which also call for volumetric examination of the pump casing and valve body welds.

  20. 46 CFR 164.120-7 - Acceptance criteria.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ASTM D 695 241 MPa (35,000 ln/in2). (v) Fire retardant MSC Circ. 1006 Pass. (vi) Water absorption, 24... hours in boiling distilled water as per ASTM D 570 paragraph 7.5. The specimens must then be cooled in water at 23 °C and tested wet at standard conditions immediately after removal from the water.):...

  1. 46 CFR 164.120-7 - Acceptance criteria.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... inspections and tests required by this section, including weathering of samples, are the responsibility of the... of this subpart) and must be tested and meet the requirements of weathering and post-weathering mechanical testing as shown in Table 164.120-7 of this section. Samples for the weathering must be...

  2. DWPF COAL CARBON WASTE ACCEPTANCE CRITERIA LIMIT EVALUATION

    SciTech Connect

    Lambert, D.; Choi, A.

    2010-06-21

    A paper study was completed to assess the impact on the Defense Waste Processing Facility (DWPF)'s Chemical Processing Cell (CPC) acid addition and melter off-gas flammability control strategy in processing Sludge Batch 10 (SB10) to SB13 with an added Fluidized Bed Steam Reformer (FBSR) stream and two Salt Waste Processing Facility (SWPF) products (Strip Effluent and Actinide Removal Stream). In all of the cases that were modeled, an acid mix using formic acid and nitric acid could be achieved that would produce a predicted Reducing/Oxidizing (REDOX) Ratio of 0.20 Fe{sup +2}/{Sigma}Fe. There was sufficient formic acid in these combinations to reduce both the manganese and mercury present. Reduction of manganese and mercury are both necessary during Sludge Receipt and Adjustment Tank (SRAT) processing, however, other reducing agents such as coal and oxalate are not effective in this reduction. The next phase in this study will be experimental testing with SB10, FBSR, and both SWPF simulants to validate the assumptions in this paper study and determine whether there are any issues in processing these streams simultaneously. The paper study also evaluated a series of abnormal processing conditions to determine whether potential abnormal conditions in FBSR, SWPF or DWPF would produce melter feed that was too oxidizing or too reducing. In most of the cases that were modeled with one parameter at its extreme, an acid mix using formic acid and nitric acid could be achieved that would produce a predicted REDOX of 0.09-0.30 (target 0.20). However, when a run was completed with both high coal and oxalate, with minimum formic acid to reduce mercury and manganese, the final REDOX was predicted to be 0.49 with sludge and FBSR product and 0.47 with sludge, FBSR product and both SWPF products which exceeds the upper REDOX limit.

  3. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... must be subjected to the Drop Weight Impact Sensitivity Test (Test Method 3(a)(i)), the Friction... substance has a friction sensitiveness equal to or greater than that of dry pentaerythrite tetranitrate (PETN) when tested in the Friction Sensitivity Test; (4) The substance fails to pass the test...

  4. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... must be subjected to the Drop Weight Impact Sensitivity Test (Test Method 3(a)(i)), the Friction... substance has a friction sensitiveness equal to or greater than that of dry pentaerythrite tetranitrate (PETN) when tested in the Friction Sensitivity Test; (4) The substance fails to pass the test...

  5. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... must be subjected to the Drop Weight Impact Sensitivity Test (Test Method 3(a)(i)), the Friction... substance has a friction sensitiveness equal to or greater than that of dry pentaerythrite tetranitrate (PETN) when tested in the Friction Sensitivity Test; (4) The substance fails to pass the test...

  6. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... must be subjected to the Drop Weight Impact Sensitivity Test (Test Method 3(a)(i)), the Friction... substance has a friction sensitiveness equal to or greater than that of dry pentaerythrite tetranitrate (PETN) when tested in the Friction Sensitivity Test; (4) The substance fails to pass the test...

  7. 7 CFR 42.133 - Portion of production acceptance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Section 42.133 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS STANDARDS FOR CONDITION OF FOOD CONTAINERS On-Line Sampling and Inspection...

  8. 44 CFR 362.3 - Criteria for determining acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... gift of services is offered to the Administrator for the benefit of the National Earthquake Hazards Reduction Program. (a) The gift of property or gift of services must clearly and directly further the objectives of the National Earthquake Hazards Reduction Program, as defined in 42 U.S.C. 7702. (b) All...

  9. 44 CFR 362.3 - Criteria for determining acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... gift of services is offered to the Administrator for the benefit of the National Earthquake Hazards Reduction Program. (a) The gift of property or gift of services must clearly and directly further the objectives of the National Earthquake Hazards Reduction Program, as defined in 42 U.S.C. 7702. (b) All...

  10. 44 CFR 362.3 - Criteria for determining acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... gift of services is offered to the Administrator for the benefit of the National Earthquake Hazards Reduction Program. (a) The gift of property or gift of services must clearly and directly further the objectives of the National Earthquake Hazards Reduction Program, as defined in 42 U.S.C. 7702. (b) All...

  11. 44 CFR 362.3 - Criteria for determining acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... gift of services is offered to the Administrator for the benefit of the National Earthquake Hazards Reduction Program. (a) The gift of property or gift of services must clearly and directly further the objectives of the National Earthquake Hazards Reduction Program, as defined in 42 U.S.C. 7702. (b) All...

  12. 44 CFR 362.3 - Criteria for determining acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... gift of services is offered to the Administrator for the benefit of the National Earthquake Hazards Reduction Program. (a) The gift of property or gift of services must clearly and directly further the objectives of the National Earthquake Hazards Reduction Program, as defined in 42 U.S.C. 7702. (b) All...

  13. 7 CFR 42.133 - Portion of production acceptance criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Section 42.133 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS STANDARDS FOR CONDITION OF FOOD CONTAINERS On-Line Sampling and Inspection...

  14. GNS-12 Packaging design criteria

    SciTech Connect

    Clements, E.P., Westinghouse Hanford

    1996-07-24

    The purpose of this Packaging Design Criteria (PDC) is to provide criteria for the Safety Analysis Report for Packaging (SARP)(Onsite). The SARP provides the evaluation to demonstrate that the onsite transportation safety criteria are met for the transport and storage of the 324 Building vitrified encapsulated material in the GNS-12 cask. In this application, the approved PDC provides a formal set of standards for the payload requirements, and guidance for the current cask transport configuration and a revised storage seal and primary lid modification design.

  15. Stabilizing plutonium materials at Hanford: systems engineering for PFP transition project effort on DNFSB 94-1

    SciTech Connect

    Huber, T.E., Westinghouse Hanford

    1996-07-02

    This report discusses the basic objectives of the stabilization and packaging activities at the Plutonium Finishing Plant that satisfy the Defense Nuclear Facility Safety Board Recommendation 94-1 by transforming the plutonium materials at hanford into forms or conditions which are suitable for safe storage to appropriate storage criteria; or discard that meets appropriate waste acceptance criteria.

  16. Radiation dose assessment methodology and preliminary dose estimates to support US Department of Energy radiation control criteria for regulated treatment and disposal of hazardous wastes and materials

    SciTech Connect

    Aaberg, R.L.; Baker, D.A.; Rhoads, K.; Jarvis, M.F.; Kennedy, W.E. Jr.

    1995-07-01

    This report provides unit dose to concentration levels that may be used to develop control criteria for radionuclide activity in hazardous waste; if implemented, these criteria would be developed to provide an adequate level of public and worker health protection, for wastes regulated under U.S, Environmental Protection Agency (EPA) requirements (as derived from the Resource Conservation and Recovery Act [RCRA] and/or the Toxic Substances Control Act [TSCA]). Thus, DOE and the US Nuclear Regulatory Commission can fulfill their obligation to protect the public from radiation by ensuring that such wastes are appropriately managed, while simultaneously reducing the current level of dual regulation. In terms of health protection, dual regulation of very small quantities of radionuclides provides no benefit.

  17. Offer/Acceptance Ratio.

    ERIC Educational Resources Information Center

    Collins, Mimi

    1997-01-01

    Explores how human resource professionals, with above average offer/acceptance ratios, streamline their recruitment efforts. Profiles company strategies with internships, internal promotion, cooperative education programs, and how to get candidates to accept offers. Also discusses how to use the offer/acceptance ratio as a measure of program…

  18. Acceptance Test Procedure for Cathodic Protection, Rectifier 11

    SciTech Connect

    Clifton, F.T.

    1995-04-28

    This Acceptance Test Procedure for Project W-030 Cathodic Protection Installation, 241-AY and 241-AZ Tank Farm Ventilation Upgrade, has been prepared to demonstrate that the cathodic protection system functions as required by project criteria.

  19. 46 CFR 56.60-1 - Acceptable materials and specifications (replaces 123 and Table 126.1 in ASME B31.1).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...; see 46 CFR 56.01-2). (2) Materials used in piping systems must be selected from the specifications that appear in Table 56.60-1(a) of this section or 46 CFR 56.60-2, Table 56.60-2(a), or they may be... (both incorporated by reference; see 46 CFR 56.01-2) if not prohibited by a regulation of...

  20. 46 CFR 56.60-1 - Acceptable materials and specifications (replaces 123 and Table 126.1 in ASME B31.1).

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...; see 46 CFR 56.01-2). (2) Materials used in piping systems must be selected from the specifications that appear in Table 56.60-1(a) of this section or 46 CFR 56.60-2, Table 56.60-2(a), or they may be... (both incorporated by reference; see 46 CFR 56.01-2) if not prohibited by a regulation of...

  1. 46 CFR 56.60-1 - Acceptable materials and specifications (replaces 123 and Table 126.1 in ASME B31.1).

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...; see 46 CFR 56.01-2). (2) Materials used in piping systems must be selected from the specifications that appear in Table 56.60-1(a) of this section or 46 CFR 56.60-2, Table 56.60-2(a), or they may be... (both incorporated by reference; see 46 CFR 56.01-2) if not prohibited by a regulation of...

  2. 46 CFR 56.60-1 - Acceptable materials and specifications (replaces 123 and Table 126.1 in ASME B31.1).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...; see 46 CFR 56.01-2). (2) Materials used in piping systems must be selected from the specifications that appear in Table 56.60-1(a) of this section or 46 CFR 56.60-2, Table 56.60-2(a), or they may be... (both incorporated by reference; see 46 CFR 56.01-2) if not prohibited by a regulation of...

  3. 46 CFR 56.60-1 - Acceptable materials and specifications (replaces 123 and Table 126.1 in ASME B31.1).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...; see 46 CFR 56.01-2). (2) Materials used in piping systems must be selected from the specifications that appear in Table 56.60-1(a) of this section or 46 CFR 56.60-2, Table 56.60-2(a), or they may be... (both incorporated by reference; see 46 CFR 56.01-2) if not prohibited by a regulation of...

  4. A retrospective analysis 21 to 35 years after birth of hydrocephalic patients born from 1946 to 1955. An overall description of the material and the criteria used.

    PubMed

    Jansen, J

    1985-06-01

    219 patients diagnosed as having hydrocephalus before the age of 5 years were traced 21 to 35 years after birth. Fifty-four patients had had operations, but those used before the introduction of ventriculo-atrial shunts did not influence the outcome; the series may be considered to represent the natural history of hydrocephalus. Based on available information in the case notes, patients were divided into 2 groups: 1) proven hydrocephalus, and 2) unproven hydrocephalus. Strict criteria were used. Ninety-nine patients (45%) had died. Serious prognostic factors as to survival were early admission, increasing head circumference, downward displacement of the eyes, and seizures. Together with the criteria suggested for proven hydrocephalus, the above factors may act as a guideline to operative treatment. Fifty-seven percent of 116 known survivors were able to work, 9% lived independently but had no working ability, and 34% needed permanent care or supervision. This outcome is similar to that of shunt-operated patients followed for a shorter period. The only parameters indicative of socio-economic independence in adult life were early admission and absence of seizures in childhood. PMID:4024854

  5. Program for establishing long-time flight service performance of composite materials in the center wing structure of C-130 aircraft. Phase 4: Ground/flight acceptance tests

    NASA Technical Reports Server (NTRS)

    Harvill, W. E.; Kizer, J. A.

    1976-01-01

    The advantageous structural uses of advanced filamentary composites are demonstrated by design, fabrication, and test of three boron-epoxy reinforced C-130 center wing boxes. The advanced development work necessary to support detailed design of a composite reinforced C-130 center wing box was conducted. Activities included the development of a basis for structural design, selection and verification of materials and processes, manufacturing and tooling development, and fabrication and test of full-scale portions of the center wing box. Detailed design drawings, and necessary analytical structural substantiation including static strength, fatigue endurance, flutter, and weight analyses are considered. Some additional component testing was conducted to verify the design for panel buckling, and to evaluate specific local design areas. Development of the cool tool restraint concept was completed, and bonding capabilities were evaluated using full-length skin panel and stringer specimens.

  6. 49 CFR 193.2303 - Construction acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Construction acceptance. 193.2303 Section 193.2303 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...: FEDERAL SAFETY STANDARDS Construction § 193.2303 Construction acceptance. No person may place in...

  7. A Test of the Biogenicity Criteria Established for Microfossils and Stromatolites on Quaternary Tufa and Speleothem Materials Formed in the "Twilight Zone" at Caerwys, UK.

    PubMed

    Brasier, A T; Rogerson, M R; Mercedes-Martin, R; Vonhof, H B; Reijmer, J J G

    2015-10-01

    The ability to distinguish the features of a chemical sedimentary rock that can only be attributed to biology is a challenge relevant to both geobiology and astrobiology. This study aimed to test criteria for recognizing petrographically the biogenicity of microbially influenced fabrics and fossil microbes in complex Quaternary stalactitic carbonate rocks from Caerwys, UK. We found that the presence of carbonaceous microfossils, fabrics produced by the calcification of microbial filaments, and the asymmetrical development of tufa fabrics due to the more rapid growth of microbially influenced laminations could be recognized as biogenic features. Petrographic evidence also indicates that the development of "speleothem-like" laminae was related to episodes of growth interrupted by intervals of nondeposition and erosion. The lack of any biogenic characteristics in these laminae is consistent with their development as a result of variation in the physicochemical parameters that drive calcite precipitation from meteoric waters in such environmental settings. PMID:26496527

  8. A Test of the Biogenicity Criteria Established for Microfossils and Stromatolites on Quaternary Tufa and Speleothem Materials Formed in the "Twilight Zone" at Caerwys, UK.

    PubMed

    Brasier, A T; Rogerson, M R; Mercedes-Martin, R; Vonhof, H B; Reijmer, J J G

    2015-10-01

    The ability to distinguish the features of a chemical sedimentary rock that can only be attributed to biology is a challenge relevant to both geobiology and astrobiology. This study aimed to test criteria for recognizing petrographically the biogenicity of microbially influenced fabrics and fossil microbes in complex Quaternary stalactitic carbonate rocks from Caerwys, UK. We found that the presence of carbonaceous microfossils, fabrics produced by the calcification of microbial filaments, and the asymmetrical development of tufa fabrics due to the more rapid growth of microbially influenced laminations could be recognized as biogenic features. Petrographic evidence also indicates that the development of "speleothem-like" laminae was related to episodes of growth interrupted by intervals of nondeposition and erosion. The lack of any biogenic characteristics in these laminae is consistent with their development as a result of variation in the physicochemical parameters that drive calcite precipitation from meteoric waters in such environmental settings.

  9. 16 CFR 1616.4 - Sampling and acceptance procedures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Sampling and acceptance procedures. 1616.4... Sampling and acceptance procedures. (a) General. (1) The test criteria of § 1616.3(b) shall be used in conjunction with the following fabric and garment sampling plan. The Consumer Product Safety Commission...

  10. 16 CFR 1616.4 - Sampling and acceptance procedures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Sampling and acceptance procedures. 1616.4... Sampling and acceptance procedures. (a) General. (1) The test criteria of § 1616.3(b) shall be used in conjunction with the following fabric and garment sampling plan. The Consumer Product Safety Commission...

  11. 16 CFR 1616.4 - Sampling and acceptance procedures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Sampling and acceptance procedures. 1616.4... Sampling and acceptance procedures. (a) General. (1) The test criteria of § 1616.3(b) shall be used in conjunction with the following fabric and garment sampling plan. The Consumer Product Safety Commission...

  12. Acceptability of BCG vaccination.

    PubMed

    Mande, R

    1977-01-01

    The acceptability of BCG vaccination varies a great deal according to the country and to the period when the vaccine is given. The incidence of complications has not always a direct influence on this acceptability, which depends, for a very large part, on the risk of tuberculosis in a given country at a given time.

  13. ATLAS ACCEPTANCE TEST

    SciTech Connect

    Cochrane, J. C. , Jr.; Parker, J. V.; Hinckley, W. B.; Hosack, K. W.; Mills, D.; Parsons, W. M.; Scudder, D. W.; Stokes, J. L.; Tabaka, L. J.; Thompson, M. C.; Wysocki, Frederick Joseph; Campbell, T. N.; Lancaster, D. L.; Tom, C. Y.

    2001-01-01

    The acceptance test program for Atlas, a 23 MJ pulsed power facility for use in the Los Alamos High Energy Density Hydrodynamics program, has been completed. Completion of this program officially releases Atlas from the construction phase and readies it for experiments. Details of the acceptance test program results and of machine capabilities for experiments will be presented.

  14. Using Reform-Based Criteria to Support the Development of Preservice Elementary Teachers' Pedagogical Design Capacity for Analyzing Science Curriculum Materials

    ERIC Educational Resources Information Center

    Beyer, Carrie J.

    2009-01-01

    Effective science teachers use curriculum materials as a guide in their planning, critiquing and adapting them to promote inquiry-oriented, standards-based teaching and address specific contextual needs. Unfortunately, many preservice teachers encounter difficulties with these design tasks, making changes that are inconsistent with science…

  15. 10 CFR 710.7 - Application of the criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... DEPARTMENT OF ENERGY CRITERIA AND PROCEDURES FOR DETERMINING ELIGIBILITY FOR ACCESS TO CLASSIFIED MATTER OR... Classified Matter or Special Nuclear Material Criteria and Procedures for Determining Eligibility for Access to Classified Matter Or Special Nuclear Material § 710.7 Application of the criteria. (a)...

  16. FDI World Dental Federation - clinical criteria for the evaluation of direct and indirect restorations. Update and clinical examples.

    PubMed

    Hickel, Reinhard; Peschke, Arnd; Tyas, Martin; Mjör, Ivar; Bayne, Stephen; Peters, Mathilde; Hiller, Karl-Anton; Randall, Ross; Vanherle, Guido; Heintze, Siegward D

    2010-08-01

    In 2007, new clinical criteria were approved by the FDI World Dental Federation and simultaneously published in three dental journals. The criteria were categorized into three groups: esthetic parameters (four criteria), functional parameters (six criteria), and biological parameters (six criteria). Each criterion can be expressed with five scores, three for acceptable and two for non-acceptable (one for reparable and one for replacement). The criteria have been used in several clinical studies since 2007, and the resulting experience in their application has led to a requirement to modify some of the criteria and scores. The two major alterations involve staining and approximal contacts. As staining of the margins and the surface have different causes, both phenomena do not appear simultaneously. Thus, staining has been differentiated into marginal staining and surface staining. The approximal contact now appears under the name "approximal anatomic form" as the approximal contour is a specific, often non-esthetic issue that cannot be integrated into the criterion "esthetic anatomical form". In 2008, a web-based training and calibration tool called e-calib (www.e-calib.info) was made available. Clinical investigators and other research workers can train and calibrate themselves interactively by assessing clinical cases of posterior restorations, which are presented as high quality pictures. Currently, about 300 clinical cases are included in the database which is regularly updated. Training for 8 of the 16 clinical criteria is available in the program: "Surface luster"; "Staining (surface, margins)"; "Color match and translucency"; "Esthetic anatomical form"; "Fracture of material and retention"; "Marginal adaptation"; "Recurrence of caries, erosion, abfraction"; and "Tooth integrity (enamel cracks, tooth fractures)". Typical clinical cases are presented for each of these eight criteria and their corresponding five scores.

  17. FDI World Dental Federation: clinical criteria for the evaluation of direct and indirect restorations-update and clinical examples.

    PubMed

    Hickel, Reinhard; Peschke, Arnd; Tyas, Martin; Mjör, Ivar; Bayne, Stephen; Peters, Mathilde; Hiller, Karl-Anton; Randall, Ross; Vanherle, Guido; Heintze, Siegward D

    2010-08-01

    In 2007, new clinical criteria were approved by the FDI World Dental Federation and simultaneously published in three dental journals. The criteria were categorized into three groups: esthetic parameters (four criteria), functional parameters (six criteria) and biological parameters (six criteria). Each criterion can be expressed with five scores, three for acceptable and two for non-acceptable (one for reparable and one for replacement). The criteria have been used in several clinical studies since 2007, and the resulting experience in their application has led to a requirement to modify some of the criteria and scores. The two major alterations involve staining and approximal contacts. As staining of the margins and the surface has different causes, both phenomena do not appear simultaneously. Thus, staining has been differentiated into marginal staining and surface staining. The approximal contact now appears under the name "approximal anatomic form" as the approximal contour is a specific, often non-esthetic issue that cannot be integrated into the criterion "esthetic anatomical form". In 2008, a web-based training and calibration tool called e-calib ( www.e-calib.info ) was made available. Clinical investigators and other research workers can train and calibrate themselves interactively by assessing clinical cases of posterior restorations which are presented as high-quality pictures. Currently, about 300 clinical cases are included in the database which is regularly updated. Training for eight of the 16 clinical criteria is available in the program: "Surface lustre"; "Staining (surface, margins)"; "Color match and translucency"; Esthetic anatomical form"; "Fracture of material and retention"; "Marginal adaptation"; "Recurrence of caries, erosion, abfraction"; and "Tooth integrity (enamel cracks, tooth fractures)". Typical clinical cases are presented for each of these eight criteria and their corresponding five scores.

  18. Acceptance procedures: Microfilm printer

    NASA Technical Reports Server (NTRS)

    Lockwood, H. E.

    1973-01-01

    Acceptance tests were made for a special order automatic additive color microfilm printer. Tests include film capacity, film transport, resolution, illumination uniformity, exposure range checks, and color cuing considerations.

  19. 33 CFR 155.1065 - Procedures for plan submission, approval, requests for acceptance of alternative planning...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., approval, requests for acceptance of alternative planning criteria, and appeal. 155.1065 Section 155.1065....1065 Procedures for plan submission, approval, requests for acceptance of alternative planning criteria... certifying that the plan meets the applicable requirements of subparts D, E, F, and G of this part and...

  20. Integration of environmental and human health risk assessment for industries using hazardous materials: a quantitative multi criteria approach for environmental decision makers.

    PubMed

    Topuz, E; Talinli, I; Aydin, E

    2011-02-01

    Environmental management, for which environmental and human health risk assessment is the first stage, is a requirement for industries both before construction and during operation in order to sustain improved quality of life in the ecosystem. Therefore, the aim of this study is to propose an approach that integrates environmental and human health risk assessment for industries using hazardous materials in order to support environmental decision makers with quantitative and directive results. Analytic hierarchy process and fuzzy logic are used as tools to handle problems caused by complexity of environment and uncertain data. When the proposed approach is implemented to a scenario, it was concluded that it is possible to define risk sources with their risk classes and related membership degrees in that classes which enable the decision maker to decide which risk source has priority. In addition, they can easily point out and rank the factors contributing those risk sources owing to priority weights of them. As a result, environmental decision makers can use this approach while they are developing management alternatives for unfounded and on-going industrial plants using hazardous materials. PMID:21111481

  1. Acceptance Priority Ranking & Annual Capacity Report

    SciTech Connect

    2004-07-31

    The Nuclear Waste Policy Act of 1982, as amended (the Act), assigns the Federal Government the responsibility for the disposal of spent nuclear fuel and high-level waste. Section 302(a) of the Act authorizes the Secretary to enter into contracts with the owners and generators of commercial spent nuclear fuel and/or high-level waste. The Standard Contract for Disposal of Spent Nuclear Fuel and/or High-Level Radioactive Waste (Standard Contract) established the contractual mechanism for the Department's acceptance and disposal of spent nuclear fuel and high-level waste. It includes the requirements and operational responsibilities of the parties to the Standard Contract in the areas of administrative matters, fees, terms of payment, waste acceptance criteria, and waste acceptance procedures. The Standard Contract provides for the acquisition of title to the spent nuclear fuel and/or high-level waste by the Department, its transportation to Federal facilities, and its subsequent disposal.

  2. Geological and geochemical criteria for the continental nature of the Mendeleev Rise (the Arctic Ocean) from the data of drilling and dredging of seabed rock material

    NASA Astrophysics Data System (ADS)

    Morozov, Andrey; Petrov, Oleg; Kremenetskiy, Alexander; Kashubin, Sergey; Rekant, Pavel; Gusev, Eugene; Shokalskiy, Sergey; Shevchenko, Sergey; Sergeev, Sergey; Artyushkov, Eugene

    2013-04-01

    The results are presented of geological and geophysical studies on the Mendeleev Rise at 10 test sites at 79°N to 83°N (expedition "Arktika-2012" in August-September 2012). During the expedition, for the first time, three boreholes were drilled in the bedrocks of the Mendeleev Rise basement at a depth of 1700-2600 m, and more than 20 thousand fragments of seabed rock material were dredged. Among them carbonate-bearing rocks including dolomite with relicts of trilobites and ostracoderms (D3-C) constitute up 65 %. Up to 20% are terrigenous rocks with a predominance of quartz sandstones. Magmatic rocks constitute 10-15% of the samples (including 8% of gabbro-dolerite and 2 % of granite) with 5% of metamorphic rocks. The boreholes revealed magmatic mafic rocks of basalt to basaltic andesite to trachyandesite series (SiO2-48-58% K2O+Na2O-3,4-9,2%) including epigenically altered volcanic breccias. All fragments of magmatic mafic rocks have a similar mineral and chemical composition and are grouped with gabbro dolerite (SiO2-49-51%, K2O+Na2O-2,5-3,0%). Preliminary results of mineralogic, geochemical and of isotopic geochemical (ICP-OEC, ICP-MS, RFA, Sm-Nd, Rb-Sr, EPMA and others) analyses suggest the continental nature of the studied rocks and show a distinct difference from rocks of the Gakkel Ridge in the Eurasian part of the ocean, which are of the oceanic origin. U-Pb dating of zircons from the core rocks and seabed rock material (SIMS SHRIMP II) indicate a wide range of their formation age: 2940-995, 639-385 and 303-203 Ma and thus suggest that they belong to volcanogenic terrigeneous carbonate-bearing bed of the ancient platform composing the floor of Amerasian part of the Arctic Ocean.

  3. Photovoltaic system criteria documents. Volume 3: Environmental issues and evaluation criteria for photovoltaic applications

    NASA Technical Reports Server (NTRS)

    Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

    1979-01-01

    The environmental issues and evaluation criteria relating to the suitability of sites proposed for photovoltaic (PV) system deployment are identified. The important issues are defined, briefly discussed and then developed into evaluation criteria. System designers are provided with information on the environmental sensitivity of PV systems in realistic applications, background material which indicates the applicability of the siting issues identified, and evaluation criteria are defined to facilitate the selection of sites that maximize PV system operation.

  4. ASME Material Challenges for Advanced Reactor Concepts

    SciTech Connect

    Piyush Sabharwall; Ali Siahpush

    2013-07-01

    This study presents the material Challenges associated with Advanced Reactor Concept (ARC) such as the Advanced High Temperature Reactor (AHTR). ACR are the next generation concepts focusing on power production and providing thermal energy for industrial applications. The efficient transfer of energy for industrial applications depends on the ability to incorporate cost-effective heat exchangers between the nuclear heat transport system and industrial process heat transport system. The heat exchanger required for AHTR is subjected to a unique set of conditions that bring with them several design challenges not encountered in standard heat exchangers. The corrosive molten salts, especially at higher temperatures, require materials throughout the system to avoid corrosion, and adverse high-temperature effects such as creep. Given the very high steam generator pressure of the supercritical steam cycle, it is anticipated that water tube and molten salt shell steam generators heat exchanger will be used. In this paper, the ASME Section III and the American Society of Mechanical Engineers (ASME) Section VIII requirements (acceptance criteria) are discussed. Also, the ASME material acceptance criteria (ASME Section II, Part D) for high temperature environment are presented. Finally, lack of ASME acceptance criteria for thermal design and analysis are discussed.

  5. 46 CFR 164.120-9 - Procedure for acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: SPECIFICATIONS AND APPROVAL MATERIALS Fire Retardant Resins for Lifeboats and Rescue Boats § 164.120-9 Procedure for acceptance. (a) Fire retardant resin is not subject to formal approval, but will be accepted by... Guard acceptance of fire retardant resin for use in the manufacture of lifesaving equipment does...

  6. 46 CFR 164.120-9 - Procedure for acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...: SPECIFICATIONS AND APPROVAL MATERIALS Fire Retardant Resins for Lifeboats and Rescue Boats § 164.120-9 Procedure for acceptance. (a) Fire retardant resin is not subject to formal approval, but will be accepted by... Guard acceptance of fire retardant resin for use in the manufacture of lifesaving equipment does...

  7. 46 CFR 164.120-9 - Procedure for acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: SPECIFICATIONS AND APPROVAL MATERIALS Fire Retardant Resins for Lifeboats and Rescue Boats § 164.120-9 Procedure for acceptance. (a) Fire retardant resin is not subject to formal approval, but will be accepted by... Guard acceptance of fire retardant resin for use in the manufacture of lifesaving equipment does...

  8. Smaller hospitals accept advertising.

    PubMed

    Mackesy, R

    1988-07-01

    Administrators at small- and medium-sized hospitals gradually have accepted the role of marketing in their organizations, albeit at a much slower rate than larger institutions. This update of a 1983 survey tracks the increasing competitiveness, complexity and specialization of providing health care and of advertising a small hospital's services. PMID:10288550

  9. Students Accepted on Probation.

    ERIC Educational Resources Information Center

    Lorberbaum, Caroline S.

    This report is a justification of the Dalton Junior College admissions policy designed to help students who had had academic and/or social difficulties at other schools. These students were accepted on probation, their problems carefully analyzed, and much effort devoted to those with low academic potential. They received extensive academic and…

  10. Approaches to acceptable risk

    SciTech Connect

    Whipple, C.

    1997-04-30

    Several alternative approaches to address the question {open_quotes}How safe is safe enough?{close_quotes} are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made.

  11. Why was Relativity Accepted?

    NASA Astrophysics Data System (ADS)

    Brush, S. G.

    Historians of science have published many studies of the reception of Einstein's special and general theories of relativity. Based on a review of these studies, and my own research on the role of the light-bending prediction in the reception of general relativity, I discuss the role of three kinds of reasons for accepting relativity (1) empirical predictions and explanations; (2) social-psychological factors; and (3) aesthetic-mathematical factors. According to the historical studies, acceptance was a three-stage process. First, a few leading scientists adopted the special theory for aesthetic-mathematical reasons. In the second stage, their enthusiastic advocacy persuaded other scientists to work on the theory and apply it to problems currently of interest in atomic physics. The special theory was accepted by many German physicists by 1910 and had begun to attract some interest in other countries. In the third stage, the confirmation of Einstein's light-bending prediction attracted much public attention and forced all physicists to take the general theory of relativity seriously. In addition to light-bending, the explanation of the advance of Mercury's perihelion was considered strong evidence by theoretical physicists. The American astronomers who conducted successful tests of general relativity became defenders of the theory. There is little evidence that relativity was `socially constructed' but its initial acceptance was facilitated by the prestige and resources of its advocates.

  12. Redefining design criteria for Pu-238 gloveboxes

    SciTech Connect

    Acosta, S.V.

    1998-12-31

    Enclosures for confinement of special nuclear materials (SNM) have evolved into the design of gloveboxes. During the early stages of glovebox technology, established practices and process operation requirements defined design criteria. Proven boxes that performed and met or exceeded process requirements in one group or area, often could not be duplicated in other areas or processes, and till achieve the same success. Changes in materials, fabrication and installation methods often only met immediate design criteria. Standardization of design criteria took a big step during creation of ``Special-Nuclear Materials R and D Laboratory Project, Glovebox standards``. The standards defined design criteria for every type of process equipment in its most general form. Los Alamos National Laboratory (LANL) then and now has had great success with Pu-238 processing. However with ever changing Environment Safety and Health (ES and H) requirements and Ta-55 Facility Configuration Management, current design criteria are forced to explore alternative methods of glovebox design fabrication and installation. Pu-238 fuel processing operations in the Power Source Technologies Group have pushed the limitations of current design criteria. More than half of Pu-238 gloveboxes are being retrofitted or replaced to perform the specific fuel process operations. Pu-238 glovebox design criteria are headed toward process designed single use glovebox and supporting line gloveboxes. Gloveboxes that will house equipment and processes will support TA-55 Pu-238 fuel processing needs into the next century and extend glovebox expected design life.

  13. Project W-049H Collection System Acceptance Test

    SciTech Connect

    Buckles, D.I.

    1994-11-11

    The Acceptance Test Procedure (ATP) Program for Project W-049H covers the following activities: Disposal system, Collection system, Instrumentation and control system. Each activity has its own ATP. The purpose of the ATPs is to verify that the systems have been constructed in accordance with the construction documents and to demonstrate that the systems function as required by the Project criteria. This ATP has been prepared to demonstrate that the Collection System Instrumentation functions as required by project criteria.

  14. Acceptability of human risk.

    PubMed Central

    Kasperson, R E

    1983-01-01

    This paper has three objectives: to explore the nature of the problem implicit in the term "risk acceptability," to examine the possible contributions of scientific information to risk standard-setting, and to argue that societal response is best guided by considerations of process rather than formal methods of analysis. Most technological risks are not accepted but are imposed. There is also little reason to expect consensus among individuals on their tolerance of risk. Moreover, debates about risk levels are often at base debates over the adequacy of the institutions which manage the risks. Scientific information can contribute three broad types of analyses to risk-setting deliberations: contextual analysis, equity assessment, and public preference analysis. More effective risk-setting decisions will involve attention to the process used, particularly in regard to the requirements of procedural justice and democratic responsibility. PMID:6418541

  15. New Joint Sealants. Criteria, Design and Materials.

    ERIC Educational Resources Information Center

    Building Research Inst., Inc., Washington, DC.

    Contents include--(1) sealing concrete joints, (2) sealing glass and metal joints, (3) metal and glass joint sealants from a fabricator's viewpoint, (4) a theory of adhesion for joint sealants, (5) geometry of simple joint seals under strain, (6) joint sealant specifications from a manufacturer's viewpoint, (7) joint sealant requirements from an…

  16. Fire protection design criteria

    SciTech Connect

    1997-03-01

    This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, national Fire Protection Association Codes and Standards, and any other applicable DOE construction criteria. This Standard, along with other delineated criteria, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities.

  17. UPDATE ON PEC ACTIVITIES INCLUDING NEW EVALUATION CRITERIA, THE APPLICATION COMPLETENESS CHECKLIST, AND STATUS OF THE WEBSITE DEVELOPMENT

    EPA Science Inventory

    US EPA's Pathogen Equivalency Committee (PEC) has updated the evaluation criteria it uses to make recommendations of equivalency (to processes acceptable under 40CFR503) on innovative or alternative sludge pathogen reduction processes. These criteria will be presented along with ...

  18. Age and Acceptance of Euthanasia.

    ERIC Educational Resources Information Center

    Ward, Russell A.

    1980-01-01

    Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

  19. Strain limit criteria to predict failure

    SciTech Connect

    Flanders, H.E.

    1995-12-31

    In recent years extensive effort has been expended to qualify existing structures for conditions that are beyond the original design basis. Determination of the component failure load is useful for this type of evaluation. This paper presents criteria based upon strain limits to predict the load at failure. The failure modes addressed are excessive plastic deformations, localized plastic strains, and structural instability. The effects of analytical method sophistication, as built configurations, material properties degradation, and stress state are addressed by the criteria.

  20. Validation and acceptance of synthetic infrared imagery

    NASA Astrophysics Data System (ADS)

    Smith, Moira I.; Bernhardt, Mark; Angell, Christopher R.; Hickman, Duncan; Whitehead, Philip; Patel, Dilip

    2004-08-01

    This paper describes the use of an image query database (IQ-DB) tool as a means of implementing a validation strategy for synthetic long-wave infrared images of sea clutter. Specifically it was required to determine the validity of the synthetic imagery for use in developing and testing automatic target detection algorithms. The strategy adopted for exploiting synthetic imagery is outlined and the key issues of validation and acceptance are discussed in detail. A wide range of image metrics has been developed to achieve pre-defined validation criteria. A number of these metrics, which include post processing algorithms, are presented. Furthermore, the IQ-DB provides a robust mechanism for configuration management and control of the large volume of data used. The implementation of the IQ-DB is reviewed in terms of its cardinal point specification and its central role in synthetic imagery validation and EOSS progressive acceptance.

  1. Baby-Crying Acceptance

    NASA Astrophysics Data System (ADS)

    Martins, Tiago; de Magalhães, Sérgio Tenreiro

    The baby's crying is his most important mean of communication. The crying monitoring performed by devices that have been developed doesn't ensure the complete safety of the child. It is necessary to join, to these technological resources, means of communicating the results to the responsible, which would involve the digital processing of information available from crying. The survey carried out, enabled to understand the level of adoption, in the continental territory of Portugal, of a technology that will be able to do such a digital processing. It was used the TAM as the theoretical referential. The statistical analysis showed that there is a good probability of acceptance of such a system.

  2. High acceptance recoil polarimeter

    SciTech Connect

    The HARP Collaboration

    1992-12-05

    In order to detect neutrons and protons in the 50 to 600 MeV energy range and measure their polarization, an efficient, low-noise, self-calibrating device is being designed. This detector, known as the High Acceptance Recoil Polarimeter (HARP), is based on the recoil principle of proton detection from np[r arrow]n[prime]p[prime] or pp[r arrow]p[prime]p[prime] scattering (detected particles are underlined) which intrinsically yields polarization information on the incoming particle. HARP will be commissioned to carry out experiments in 1994.

  3. Textbook Websites: User Technology Acceptance Behaviour

    ERIC Educational Resources Information Center

    Jonas, Gregory A.; Norman, Carolyn Strand

    2011-01-01

    Compared with course management software (e.g. Blackboard and WebCT), the content and technology offered by a textbook website (TBW) is relatively costless to universities and professors, and is a potentially valuable tool that can be leveraged to help students learn course material. The present study uses the extended Technology Acceptance Model…

  4. 49 CFR 193.2303 - Construction acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Construction acceptance. 193.2303 Section 193.2303 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL GAS...

  5. 49 CFR 193.2303 - Construction acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Construction acceptance. 193.2303 Section 193.2303 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL GAS...

  6. 49 CFR 193.2303 - Construction acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Construction acceptance. 193.2303 Section 193.2303 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL GAS...

  7. 49 CFR 193.2303 - Construction acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Construction acceptance. 193.2303 Section 193.2303 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL GAS...

  8. Optical Characterization of Window Materials for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Tedjojuwono, Ken K.; Clark, Natalie; Humphreys, William M., Jr.

    2013-01-01

    An optical metrology laboratory has been developed to characterize the optical properties of optical window materials to be used for aerospace applications. Several optical measurement systems have been selected and developed to measure spectral transmittance, haze, clarity, birefringence, striae, wavefront quality, and wedge. In addition to silica based glasses, several optical lightweight polymer materials and transparent ceramics have been investigated in the laboratory. The measurement systems and selected empirical results for non-silica materials are described. These measurements will be used to form the basis of acceptance criteria for selection of window materials for future aerospace vehicle and habitat designs.

  9. 16 CFR 1616.4 - Sampling and acceptance procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Sampling and acceptance procedures. (a) General. (1) The test criteria of § 1616.3(b) shall be used in..., Fabric sampling or, for verification purposes, from randomly selected garments. (8) Multi-layer fabrics... length. Garments manufactured from multi-layer fabrics shall be tested with the edge finish which is...

  10. Acceptance test report, plutonium finishing plant life safety upgrade

    SciTech Connect

    Hodge, S.G.

    1994-12-02

    This acceptance Test Procedure (ATP) has been prepared to demonstrate that modifications to the Fir Protection systems function as required by project criteria. The ATP will test the Fire Alarm Control Panels, Flow Alarm Pressure Switch, Heat Detectors, Smoke Detectors, Flow Switches, Manual Pull Stations, and Gong/Door By Pass Switches.

  11. Sediment quality criteria: A review with recommendations for developing criteria for the Hanford Site

    SciTech Connect

    Driver, C.J.

    1994-05-01

    Criteria for determining the quality of liver sediment are necessary to ensure that concentrations of contaminants in aquatic systems are within acceptable limits for the protection of aquatic and human life. Such criteria should facilitate decision-making about remediation, handling, and disposal of contaminants. Several approaches to the development of sediment quality criteria (SQC) have been described and include both descriptive and numerical methods. However, no single method measures all impacts at all times to all organisms (U.S. EPA 1992b). The U.S. EPA`s interest is primarily in establishing chemically based, numerical SQC that are applicable nation-wide (Shea 1988). Of the approaches proposed for SQC development, only three are being considered for numerical SQC on a national level. These approaches include an Equilibrium Partitioning Approach, a site-specific method using bioassays (the Apparent Effects Threshold Approach), and an approach similar to EPA`s water quality criteria (Pavlou and Weston 1984). Although national (or even regional) criteria address a number of political, litigative, and engineering needs, some researchers feel that protection of benthic communities require site-specific, biologically based criteria (Baudo et al. 1990). This is particularly true for areas where complex mixtures of contaminants are present in sediments. Other scientifically valid and accepted procedures for freshwater SQC include a background concentration approach, methods using field or spiked bioassays, a screening level concentration approach, the Apparent Effects Threshold Approach, the Sediment Quality Triad, the International Joint Commission Sediment Assessment Strategy, and the National Status and Trends Program Approach. The various sediment assessment approaches are evaluated for application to the Hanford Reach and recommendations for Hanford Site sediment quality criteria are discussed.

  12. NWTS program criteria for mined geologic disposal of nuclear waste: program objectives, functional requirements, and system performance criteria

    SciTech Connect

    1981-04-01

    At the present time, final repository criteria have not been issued by the responsible agencies. This document describes general objectives, requirements, and criteria that the DOE intends to apply in the interim to the National Waste Terminal Storage (NWTS) Program. These objectives, requirements, and criteria have been developed on the basis of DOE's analysis of what is needed to achieve the National objective of safe waste disposal in an environmentally acceptable and economic manner and are expected to be consistent with anticipated regulatory standards. The qualitative statements in this document address the broad issues of public and occupational health and safety, institutional acceptability, engineering feasibility, and economic considerations. A comprehensive set of criteria, general and project specific, of which these are a part, will constitute a portion of the technical basis for preparation and submittal by the DOE of formal documents to support future license applications for nuclear waste repositories.

  13. Laboratory Equipment Criteria.

    ERIC Educational Resources Information Center

    State Univ. Construction Fund, Albany, NY.

    Requirements for planning, designing, constructing and installing laboratory furniture are given in conjunction with establishing facility criteria for housing laboratory equipment. Furniture and equipment described include--(1) center tables, (2) reagent racks, (3) laboratory benches and their mechanical fixtures, (4) sink and work counters, (5)…

  14. Revisiting Bioaccumulation Criteria

    EPA Science Inventory

    The objective of workgroup 5 was to revisit the B(ioaccumulation) criteria that are currently being used to identify POPs under the Stockholm Convention and PBTs under CEPA, TSCA, REACh and other programs. Despite the lack of a recognized definition for a B substance, we defined ...

  15. Effect of sorghum flour addition on in vitro starch digestibility, cooking quality, and consumer acceptability of durum wheat pasta.

    PubMed

    Khan, Imran; Yousif, Adel M; Johnson, Stuart K; Gamlath, Shirani

    2014-08-01

    Whole grain sorghum is a valuable source of resistant starch and polyphenolic antioxidants and its addition into staple food like pasta may reduce the starch digestibility. However, incorporating nondurum wheat materials into pasta provides a challenge in terms of maintaining cooking quality and consumer acceptability. Pasta was prepared from 100% durum wheat semolina (DWS) as control or by replacing DWS with either wholegrain red sorghum flour (RSF) or white sorghum flour (WSF) each at 20%, 30%, and 40% incorporation levels, following a laboratory-scale procedure. Pasta samples were evaluated for proximate composition, in vitro starch digestibility, cooking quality, and consumer acceptability. The addition of both RSF and WSF lowered the extent of in vitro starch digestion at all substitution levels compared to the control pasta. The rapidly digestible starch was lowered in all the sorghum-containing pastas compared to the control pasta. Neither RSF or WSF addition affected the pasta quality attributes (water absorption, swelling index, dry matter, adhesiveness, cohesiveness, and springiness), except color and hardness which were negatively affected. Consumer sensory results indicated that pasta samples containing 20% and 30% RSF or WSF had acceptable palatability based on meeting one or both of the preset acceptability criteria. It is concluded that the addition of wholegrain sorghum flour to pasta at 30% incorporation level is possible to reduce starch digestibility, while maintaining adequate cooking quality and consumer acceptability.

  16. Effect of sorghum flour addition on in vitro starch digestibility, cooking quality, and consumer acceptability of durum wheat pasta.

    PubMed

    Khan, Imran; Yousif, Adel M; Johnson, Stuart K; Gamlath, Shirani

    2014-08-01

    Whole grain sorghum is a valuable source of resistant starch and polyphenolic antioxidants and its addition into staple food like pasta may reduce the starch digestibility. However, incorporating nondurum wheat materials into pasta provides a challenge in terms of maintaining cooking quality and consumer acceptability. Pasta was prepared from 100% durum wheat semolina (DWS) as control or by replacing DWS with either wholegrain red sorghum flour (RSF) or white sorghum flour (WSF) each at 20%, 30%, and 40% incorporation levels, following a laboratory-scale procedure. Pasta samples were evaluated for proximate composition, in vitro starch digestibility, cooking quality, and consumer acceptability. The addition of both RSF and WSF lowered the extent of in vitro starch digestion at all substitution levels compared to the control pasta. The rapidly digestible starch was lowered in all the sorghum-containing pastas compared to the control pasta. Neither RSF or WSF addition affected the pasta quality attributes (water absorption, swelling index, dry matter, adhesiveness, cohesiveness, and springiness), except color and hardness which were negatively affected. Consumer sensory results indicated that pasta samples containing 20% and 30% RSF or WSF had acceptable palatability based on meeting one or both of the preset acceptability criteria. It is concluded that the addition of wholegrain sorghum flour to pasta at 30% incorporation level is possible to reduce starch digestibility, while maintaining adequate cooking quality and consumer acceptability. PMID:25047068

  17. Elastic-plastic strain acceptance criterion for structures subject to rapidly applied transient dynamic loading

    SciTech Connect

    Solonick, W.

    1996-11-01

    Rapidly applied transient dynamic loads produce stresses and deflections in structures that typically exceed those from static loading conditions. Previous acceptance criteria for structures designed for rapidly applied transient dynamic loading limited stresses to those determined from elastic analysis. Different stress limits were established for different grades of structure depending upon the amount of permanent set considered acceptable. Structure allowed to sustain very limited permanent set is designed to stress limits not significantly greater than yield stress. Greater permanent set in structure under rapidly applied transient dynamic loading conditions is permitted by establishing stress limits that are significantly greater than yield stress but still provide adequate safety margin (with respect to failure). This paper presents a strain-based elastic-plastic (i.e., inelastic) analysis criterion developed as an alternative to the more conservative stress-based elastic analysis stress criterion for structures subjected to rapidly applied transient dynamic loading. The strain limits established are based on a fraction of the strain at ultimate stress obtained from an engineering stress/strain curve of the material. Strains limits are categorized by type as membrane or surface and by region as general, local, or concentrated. The application of the elastic-plastic criterion provides a more accurate, less conservative design/analysis basis for structures than that used in elastic stress-based analysis criteria, while still providing adequate safety margins.

  18. Materials

    NASA Technical Reports Server (NTRS)

    Glaessgen, Edward H.; Schoeppner, Gregory A.

    2006-01-01

    NASA Langley Research Center has successfully developed an electron beam freeform fabrication (EBF3) process, a rapid metal deposition process that works efficiently with a variety of weldable alloys. The EBF3 process can be used to build a complex, unitized part in a layer-additive fashion, although the more immediate payoff is for use as a manufacturing process for adding details to components fabricated from simplified castings and forgings or plate products. The EBF3 process produces structural metallic parts with strengths comparable to that of wrought product forms and has been demonstrated on aluminum, titanium, and nickel-based alloys to date. The EBF3 process introduces metal wire feedstock into a molten pool that is created and sustained using a focused electron beam in a vacuum environment. Operation in a vacuum ensures a clean process environment and eliminates the need for a consumable shield gas. Advanced metal manufacturing methods such as EBF3 are being explored for fabrication and repair of aerospace structures, offering potential for improvements in cost, weight, and performance to enhance mission success for aircraft, launch vehicles, and spacecraft. Near-term applications of the EBF3 process are most likely to be implemented for cost reduction and lead time reduction through addition of details onto simplified preforms (casting or forging). This is particularly attractive for components with protruding details that would require a significantly large volume of material to be machined away from an oversized forging, offering significant reductions to the buy-to-fly ratio. Future far-term applications promise improved structural efficiency through reduced weight and improved performance by exploiting the layer-additive nature of the EBF3 process to fabricate tailored unitized structures with functionally graded microstructures and compositions.

  19. Sonic boom acceptability studies

    NASA Astrophysics Data System (ADS)

    Shepherd, Kevin P.; Sullivan, Brenda M.; Leatherwood, Jack D.; McCurdy, David A.

    1992-04-01

    The determination of the magnitude of sonic boom exposure which would be acceptable to the general population requires, as a starting point, a method to assess and compare individual sonic booms. There is no consensus within the scientific and regulatory communities regarding an appropriate sonic boom assessment metric. Loudness, being a fundamental and well-understood attribute of human hearing was chosen as a means of comparing sonic booms of differing shapes and amplitudes. The figure illustrates the basic steps which yield a calculated value of loudness. Based upon the aircraft configuration and its operating conditions, the sonic boom pressure signature which reaches the ground is calculated. This pressure-time history is transformed to the frequency domain and converted into a one-third octave band spectrum. The essence of the loudness method is to account for the frequency response and integration characteristics of the auditory system. The result of the calculation procedure is a numerical description (perceived level, dB) which represents the loudness of the sonic boom waveform.

  20. Sonic boom acceptability studies

    NASA Technical Reports Server (NTRS)

    Shepherd, Kevin P.; Sullivan, Brenda M.; Leatherwood, Jack D.; Mccurdy, David A.

    1992-01-01

    The determination of the magnitude of sonic boom exposure which would be acceptable to the general population requires, as a starting point, a method to assess and compare individual sonic booms. There is no consensus within the scientific and regulatory communities regarding an appropriate sonic boom assessment metric. Loudness, being a fundamental and well-understood attribute of human hearing was chosen as a means of comparing sonic booms of differing shapes and amplitudes. The figure illustrates the basic steps which yield a calculated value of loudness. Based upon the aircraft configuration and its operating conditions, the sonic boom pressure signature which reaches the ground is calculated. This pressure-time history is transformed to the frequency domain and converted into a one-third octave band spectrum. The essence of the loudness method is to account for the frequency response and integration characteristics of the auditory system. The result of the calculation procedure is a numerical description (perceived level, dB) which represents the loudness of the sonic boom waveform.

  1. Statistical Methods Handbook for Advanced Gas Reactor Fuel Materials

    SciTech Connect

    J. J. Einerson

    2005-05-01

    Fuel materials such as kernels, coated particles, and compacts are being manufactured for experiments simulating service in the next generation of high temperature gas reactors. These must meet predefined acceptance specifications. Many tests are performed for quality assurance, and many of these correspond to criteria that must be met with specified confidence, based on random samples. This report describes the statistical methods to be used. The properties of the tests are discussed, including the risk of false acceptance, the risk of false rejection, and the assumption of normality. Methods for calculating sample sizes are also described.

  2. Radiation decontamination of pharmaceutical raw materials as an integral part of the good pharmaceutical manufacturing practice (GPMP)

    NASA Astrophysics Data System (ADS)

    Ražem, D.; Katušin-Ražem, B.; Starčević, M.; Galeković, B.

    The microbiological quality of many raw materials used in the manufacture of pharmaceutical and adjuvants often fails to meet the standards set by the pharmaceutical industry. Raw materials of biological provenience are particularly susceptible to contamination. This work describes the present situation regarding the microbial load of corn starch. Given the accepted microbiological criteria, irradiation treatment is proposed as integral to Good Pharmaceutical Manufacturing Practice (GPMP). The use of total viable count as a guide for specifying microbial limits for non-sterile materials is supported. Criteria for the choice of dose are discussed.

  3. Computer signal processing for ultrasonic attenuation and velocity measurements for material property characterizations

    NASA Technical Reports Server (NTRS)

    Vary, A.

    1979-01-01

    Instrumentation and computer programming concepts that were developed for ultrasonic materials characterization are described. Methods that facilitate velocity and attenuation measurements are outlined. The apparatus described is based on a broadband, buffered contact probe using a pulse-echo approach for simultaneously measuring velocity and attenuation. Instrumentation, specimen condition, and signal acquisition and acceptance criteria are discussed. Typical results with some representative materials are presented.

  4. Computer signal processing for ultrasonic attenuation and velocity measurements for material property characterizations

    NASA Technical Reports Server (NTRS)

    Vary, A.

    1979-01-01

    This report deals with instrumentation and computer programming concepts that have been developed for ultrasonic materials characterization. Methods that facilitate velocity and attenuation measurements are described. The apparatus described is based on a broadband, buffered contact probe using a pulse-echo approach for simultaneously measuring velocity and attenuation. Instrumentation, specimen condition, and signal acquisition and acceptance criteria are discussed. Typical results with some representative materials are presented.

  5. Manpower Planning Criteria Manual, Construction Grants Section.

    ERIC Educational Resources Information Center

    Texas State Dept. of Water Resources, Austin.

    This document presents the material developed in conjunction with a project directed to test a methodology that a state water pollution control agency can use in determining its manpower and training needs. Included is a compilation of the manpower planning criteria used to relate numbers and types of personnel with deferred workloads. It also…

  6. Acceptance test procedure for High Pressure Water Jet System

    SciTech Connect

    Crystal, J.B.

    1995-05-30

    The overall objective of the acceptance test is to demonstrate a combined system. This includes associated tools and equipment necessary to perform cleaning in the 105 K East Basin (KE) for achieving optimum reduction in the level of contamination/dose rate on canisters prior to removal from the KE Basin and subsequent packaging for disposal. Acceptance tests shall include necessary hardware to achieve acceptance of the cleaning phase of canisters. This acceptance test procedure will define the acceptance testing criteria of the high pressure water jet cleaning fixture. The focus of this procedure will be to provide guidelines and instructions to control, evaluate and document the acceptance testing for cleaning effectiveness and method(s) of removing the contaminated surface layer from the canister presently identified in KE Basin. Additionally, the desired result of the acceptance test will be to deliver to K Basins a thoroughly tested and proven system for underwater decontamination and dose reduction. This report discusses the acceptance test procedure for the High Pressure Water Jet.

  7. Performance criteria for dosimeter angular response

    SciTech Connect

    Roberson, P.L.; Fox, R. A.; Cummings, F. M.; McDonald, J. C.; Jones, K.L.

    1988-06-01

    This report provides criteria for evaluating the response of personnel dosimeters to radiation at nonperpendicular incidence. The US Department of Energy Laboratory Accreditation Program (DOELAP) ensures that dosimetry systems at DOE facilities meet acceptable standards for precision and accuracy. In the past, these standards were limited to tests for system variability, energy dependence, and level of detection. The proposed criteria will broaden the scope of DOELAP to include the angular response of personnel dosimeters. Because occupational exposures in the workplace are rarely due to radiation from only one direction, dosimeters must accurately assign individual dose equivalent from irradiation at any forward angle of incidence. Including an angular response criterion in DOELAP would improve the quality of personnel monitoring provided that the criterion is developed from appropriate dose quantities. This report provides guidance for assigning individual dose equivalents for radiation fields at nonperpendicular incidence to the dosimeter. 21 refs., 10 figs., 10 tabs.

  8. Composting process design criteria. II. Detention time

    SciTech Connect

    Haug, R.T.

    1986-09-01

    Attention has always been directed to detention time as a criteria for design and operation of composting systems. Perhaps this is a logical outgrowth of work on liquid phase systems, where detention time is a fundamental parameter of design. Unlike liquid phase systems, however, the interpretation of detention time and actual values required for design have not been universally accepted in the case of composting. As a case in point, most compost systems incorporate facilities for curing the compost product. However, curing often is considered after the fact or as an add on with little relationship to the first stage, high-rate phase, whether reactor (in-vessel), static pile, or windrow. Design criteria for curing and the relationships between the first-stage, high-rate and second-stage, curing phases of a composting system have been unclear. In Part 2 of this paper, the concepts of hydraulic retention time (HRT) and solids residence time (SRT) are applied to the composting process. Definitions and design criteria for each are proposed. Based on these criteria, the first and second-stages can be designed and integrated into a complete composting system.

  9. Unified nonclassicality criteria

    NASA Astrophysics Data System (ADS)

    Ryl, S.; Sperling, J.; Agudelo, E.; Mraz, M.; Köhnke, S.; Hage, B.; Vogel, W.

    2015-07-01

    In this work we generalize the Bochner criterion addressing the characteristic function, i.e., the Fourier transform, of the Glauber-Sudarshan phase-space function. For this purpose we extend the Bochner theorem by including derivatives of the characteristic function. The resulting necessary and sufficient nonclassicality criteria unify previously known moment-based criteria with those based on the characteristic function. For applications of the generalized nonclassicality probes, we provide direct sampling formulas for balanced homodyne detection. A squeezed vacuum state is experimentally realized and characterized with our method. This complete framework—theoretical unification, sampling approach, and experimental implementation—presents an efficient toolbox to characterize quantum states of light for applications in quantum technology.

  10. PML diagnostic criteria

    PubMed Central

    Aksamit, Allen J.; Clifford, David B.; Davis, Larry; Koralnik, Igor J.; Sejvar, James J.; Bartt, Russell; Major, Eugene O.; Nath, Avindra

    2013-01-01

    Objective: To establish criteria for the diagnosis of progressive multifocal leukoencephalopathy (PML). Methods: We reviewed available literature to identify various diagnostic criteria employed. Several search strategies employing the terms “progressive multifocal leukoencephalopathy” with or without “JC virus” were performed with PubMed, SCOPUS, and EMBASE search engines. The articles were reviewed by a committee of individuals with expertise in the disorder in order to determine the most useful applicable criteria. Results: A consensus statement was developed employing clinical, imaging, pathologic, and virologic evidence in support of the diagnosis of PML. Two separate pathways, histopathologic and clinical, for PML diagnosis are proposed. Diagnostic classification includes certain, probable, possible, and not PML. Conclusion: Definitive diagnosis of PML requires neuropathologic demonstration of the typical histopathologic triad (demyelination, bizarre astrocytes, and enlarged oligodendroglial nuclei) coupled with the techniques to show the presence of JC virus. The presence of clinical and imaging manifestations consistent with the diagnosis and not better explained by other disorders coupled with the demonstration of JC virus by PCR in CSF is also considered diagnostic. Algorithms for establishing the diagnosis have been recommended. PMID:23568998

  11. 46 CFR 164.023-11 - Acceptance tests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...), as appropriate, are performed on a minimum of five samples in each of the lightest and darkest colors... 46 Shipping 6 2010-10-01 2010-10-01 false Acceptance tests. 164.023-11 Section 164.023-11 Shipping...: SPECIFICATIONS AND APPROVAL MATERIALS Thread for Personal Flotation Devices § 164.023-11 Acceptance tests....

  12. 48 CFR 1446.670 - Inspection, receiving and acceptance reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... acceptance reports. 1446.670 Section 1446.670 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR CONTRACT MANAGEMENT QUALITY ASSURANCE Material Inspection and Receiving Reports 1446.670 Inspection, receiving and acceptance reports. (a) Except for simplified acquisitions (See FAR 46.404)...

  13. 46 CFR 164.013-5 - Acceptance tests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Acceptance tests. 164.013-5 Section 164.013-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS...) § 164.013-5 Acceptance tests. Manufacturers shall ensure that the performance and identification...

  14. 46 CFR 164.023-11 - Acceptance tests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Acceptance tests. 164.023-11 Section 164.023-11 Shipping...: SPECIFICATIONS AND APPROVAL MATERIALS Thread for Personal Flotation Devices § 164.023-11 Acceptance tests. (a) Performance testing. Manufacturers shall ensure that the performance tests described in § 164.023-7 (a) or...

  15. Wall thinning criteria for low temperature-low pressure piping

    SciTech Connect

    Mertz, G.E.

    1993-01-01

    This acceptance criteria is intended to prevent gross rupture or rapidly propagating failure during normal and abnormal operating conditions. Pitting may be present in the carbon steel piping. While the acceptance criteria have provisions to preclude gross rupture through a pitted region, they do not protect against throughwall pit growth and subsequent leakage. Potential leakage through a pit in low pressure piping is less than the post-DBE design basis leakage. Both the uniform thinning and LTA criteria protect against leakage, since their potential for leakage is larger. The acceptance criteria protects against gross rupture due to general wall thinning, local wall thinning (LTA's), pitting, and fracture through weld defects. General wall thinning calculations are based on the restart criteria, SEP-24. LTA criteria for hoop stresses are based on ASME Code Case N-480 [open quotes]Examination Requirements for Pipe Wall Thinning Due to Single Phase Erosion and Corrosion[close quotes]. The LTA criteria for axial stress is based on an effective average thickness concept, which prevents plastic collapse of a locally thinned pipe. Limits on pit density, based on an effective cross section concept, are used to prevent gross rupture through a group of pits. The CEGB R-6 failure assessment diagram is used in the fracture evaluation, along with postulated weld defects. This criteria is intended for low temperature, low pressure piping systems. Corrosion and/or weld defects increase the peak stresses during normal operation and may lead to a reduction in fatigue life. Piping systems subject to significant thermal or mechanical fatigue will require additional analysis which is beyond the scope of this document.

  16. Results of an emergency response atmospheric dispersion model comparison using a state accepted statistical protocol

    SciTech Connect

    Ciolek, J.T. Jr.

    1993-10-01

    The Rocky Flats Plant, located approximately 26 km northwest of downtown Denver, Colorado, has developed an emergency response atmospheric dispersion model for complex terrain applications. Plant personnel would use the model, known as the Terrain-Responsive Atmospheric Code (TRAC) (Hodgin 1985) to project plume impacts and provide off-site protective action recommendations to the State of Colorado should a hazardous material release occur from the facility. The Colorado Department of Health (CDH) entered into an interagency agreement with the Rocky Flats Plant prime contractor, EG&G Rocky Flats, and the US Department of Energy to evaluate TRAC as an acceptable emergency response tool. After exhaustive research of similar evaluation processes from other emergency response and regulatory organizations, the interagency committee devised a formal acceptance process. The process contains an evaluation protocol (Hodgin and Smith 1992), descriptions of responsibilities, an identified experimental data set to use in the evaluation, and judgment criteria for model acceptance. The evaluation protocol is general enough to allow for different implementations. This paper explains one implementation, shows protocol results for a test case, and presents results of a comparison between versions of TRAC with different wind Field codes: a two dimensional mass consistent code called WINDS (Fosberg et al. 1976) that has been extended to three dimensions, and a fully 3 dimensional mass conserving code called NUATMOS (Ross and Smith 1987, Ross et al. 1988).

  17. Evaluation of reporting quality of the 2010 and 2012 National Surgical Congress oral presentations by CONSORT, STROBE and Timmer criteria

    PubMed Central

    Hasbahçeci, Mustafa; Başak, Fatih; Uysal, Ömer

    2014-01-01

    Objective: This study aimed to evaluate the abstracts of oral presentations that were accepted to the National Surgical Congress by CONSORT, STROBE and Timmer criteria and to recommend development of a national abstract assessment system. Material and Methods: Presentation scores were calculated for oral presentations that have been accepted to the 2010 and 2012 National Surgical Congresses and have been included in the digital congress abstract booklets by two independent reviewers who were blinded to information regarding both the author and the institution. The CONSORT and Timmer criteria were used for randomized controlled trials, and for observational studies the STROBE and Timmer criteria were used. The presentation score that was obtained by three different evaluation systems was accepted as the main variable. The score changes according to the two congresses, the influence of the reviewers on the presentation scores, and compatibility between the two reviewers were evaluated. Comparisons regarding study types and total presentation number were made by using the chi-square test, the compatibility between the total score of the presentations were made by the Mann-Whitney U test and the compatibility between the reviewers were evaluated by the Wilcoxon signed ranks test. Results: There was no difference between the two Congresses in terms of study type distribution and total number of accepted presentations (p=0.844). The total scores of randomized controlled trials and observational studies from the 2010 and 2012 National Surgical Congresses that were evaluated by two independent reviewers with different assessment tools did not show any significant difference (p>0.05). A significant difference was observed between the reviewers in their evaluation by CONSORT, STROBE and Timmer criteria (p<0.05). Conclusion: Implementation of standard criteria for the evaluation of abstracts that are sent to congresses is important in terms of presentation reporting quality

  18. Data quality objectives for moisture measurement in stabilized special nuclear material

    SciTech Connect

    DR Weier; BA Pulsipher; KL Silvers

    2000-06-05

    Data Quality Objectives methodology is applied to Loss-on-Ignition (LOI) moisture content testing for stabilized nuclear materials. This work was performed by Pacific Northwest National Laboratory in support of the Plutonium Finishing Plant (PFP)/Fluor Hanford, Inc. Historical results on LOI test results for two material types, oxide and sludge, are used to estimate within container variability. This variability estimate is then used in formulating the two recommended acceptance criteria for containers of material. The criteria which follow are proposed to replace the current criterion, which requires recycle if either of two container LOI measurements exceed 0.5 wt%, the DOE Standard 3013-99 threshold value. (1) The 95% upper confidence limit (UCL) for the true mean underlying moisture content in the container material should be less than 0.5 wt%. (2) The difference between the two LOI measurements per container should not exceed their expected 95th percentile relative to the estimated variability. Containers not meeting the first criterion, or those that generate in any negative LOI result, require material recycle. Containers not meeting the second criteria require review of the measurement results, potentially leading to resampling and retesting. Data from Los Alamos National Laboratory studies on moisture testing are obtained and analyzed. The performance of Supercritical Fluid Extraction (SFE), which will soon be implemented at the PFP, is described for several material types. This information will be used to establish initial acceptance criteria when SFE comes on line.

  19. Data Quality Objectives for Moisture Measurement in Stabilized Special Nuclear Material

    SciTech Connect

    Weier, Dennis R.; Pulsipher, Brent A.; Silvers, Kurt L.

    2000-06-01

    Data Quality Objectives methodology is applied to Loss-on-Ignition (LOI) moisture content testing for stabilized nuclear materials. This work was performed by Pacific Northwest National Laboratory in support of the Plutonium Finishing Plant (PFP) / Fluor Hanford, Inc. Historical results on LOI test results for two material types, oxide and sludge, are used to estimate within container variability. This variability estimate is then used in formulating the two recommended acceptance criteria for containers of material. The criteria which follow are proposed to replace the current criterion, which requires recycle if either of two container LOI measurements exceed 0.5 wt%, the DOE Standard 3013-99 threshold value. 1. The 95% upper confidence limit (UCL) for the true mean underlying moisture content in the container material should be less than 0.5 wt%. 2. The difference between the two LOI measurements per container should not exceed their expected 95th percentile relative to the estimated variability. Containers not meeting the first criterion, or those that generate in any negative LOI result, require material recycle. Containers not meeting the second criteria require review of the measurement results, potentially leading to resampling and retesting. Data from Los Alamos National Laboratory studies on moisture testing are obtained and analyzed. The performance of Supercritical Fluid Extraction (SFE), which will soon be implemented at the PFP, is described for several material types. This information will be used to establish initial acceptance criteria when SFE comes on line.

  20. Criteria for evaluation of reflective surface for parabolic dish concentrators

    NASA Technical Reports Server (NTRS)

    Bouquet, F.

    1980-01-01

    Commercial, second surface glass mirror are emphasized, but aluminum and metallized polymeric films are also included. Criteria for sealing solar mirrors in order to prevent environmental degradation and criteria for bonding sagged or bent mirrors to substrate materials are described. An overview of the technical areas involved in evaluating small mirror samples, sections, and entire large gores is presented. A basis for mirror criteria was established that eventually may become part of inspection and evaluation techniques for three dimensional parabolic reflective surfaces.

  1. Magnetic criteria of aromaticity.

    PubMed

    Gershoni-Poranne, Renana; Stanger, Amnon

    2015-09-21

    This review describes the current state of magnetic criteria of aromaticity. The introduction contains the fundamentals of ring currents in aromatic and antiaromatic systems, followed by a brief description of experimental and computational tools: NMR, diamagnetic susceptibility exaltation, current density analyses (CDA) and nucleus independent chemical shifts (NICS). This is followed by more comprehensive chapters: NMR - focusing on the work of R. Mitchell - NICS and CDA - describing the progress and development of the methods to their current state and presenting some examples of representative work. PMID:26035305

  2. Magnetic criteria of aromaticity.

    PubMed

    Gershoni-Poranne, Renana; Stanger, Amnon

    2015-09-21

    This review describes the current state of magnetic criteria of aromaticity. The introduction contains the fundamentals of ring currents in aromatic and antiaromatic systems, followed by a brief description of experimental and computational tools: NMR, diamagnetic susceptibility exaltation, current density analyses (CDA) and nucleus independent chemical shifts (NICS). This is followed by more comprehensive chapters: NMR - focusing on the work of R. Mitchell - NICS and CDA - describing the progress and development of the methods to their current state and presenting some examples of representative work.

  3. Cone penetrometer acceptance test report

    SciTech Connect

    Boechler, G.N.

    1996-09-19

    This Acceptance Test Report (ATR) documents the results of acceptance test procedure WHC-SD-WM-ATR-151. Included in this report is a summary of the tests, the results and issues, the signature and sign- off ATP pages, and a summarized table of the specification vs. ATP section that satisfied the specification.

  4. Performance Criteria and Evaluation System

    1992-06-18

    The Performance Criteria and Evaluation System (PCES) was developed in order to make a data base of criteria accessible to radiation safety staff. The criteria included in the package are applicable to occupational radiation safety at DOE reactor and nonreactor nuclear facilities, but any data base of criteria may be created using the Criterion Data Base Utiliity (CDU). PCES assists personnel in carrying out oversight, line, and support activities.

  5. Dissolution test acceptance sampling plans.

    PubMed

    Tsong, Y; Hammerstrom, T; Lin, K; Ong, T E

    1995-07-01

    The U.S. Pharmacopeia (USP) general monograph provides a standard for dissolution compliance with the requirements as stated in the individual USP monograph for a tablet or capsule dosage form. The acceptance rules recommended by USP have important roles in the quality control process. The USP rules and their modifications are often used as an industrial lot release sampling plan, where a lot is accepted when the tablets or capsules sampled are accepted as proof of compliance with the requirement. In this paper, the operating characteristics of the USP acceptance rules are reviewed and compared to a selected modification. The operating characteristics curves show that the USP acceptance rules are sensitive to the true mean dissolution and do not reject a lot or batch that has a large percentage of tablets that dissolve with less than the dissolution specification.

  6. 10 CFR 32.23 - Same: Safety criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Same: Safety criteria. 32.23 Section 32.23 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.23 Same: Safety criteria. An applicant for a...

  7. 10 CFR 32.23 - Same: Safety criteria.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Same: Safety criteria. 32.23 Section 32.23 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.23 Same: Safety criteria. An applicant for a...

  8. 10 CFR 32.27 - Same: Safety criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Same: Safety criteria. 32.27 Section 32.27 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.27 Same: Safety criteria. An applicant for a...

  9. 10 CFR 32.27 - Same: Safety criteria.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Same: Safety criteria. 32.27 Section 32.27 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.27 Same: Safety criteria. An applicant for a...

  10. 10 CFR 32.23 - Same: Safety criteria.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Same: Safety criteria. 32.23 Section 32.23 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.23 Same: Safety criteria. An applicant for a...

  11. 10 CFR 32.23 - Same: Safety criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Same: Safety criteria. 32.23 Section 32.23 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.23 Same: Safety criteria. An applicant for a...

  12. 10 CFR 32.27 - Same: Safety criteria.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Same: Safety criteria. 32.27 Section 32.27 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.27 Same: Safety criteria. An applicant for a...

  13. 10 CFR 32.27 - Same: Safety criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Same: Safety criteria. 32.27 Section 32.27 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.27 Same: Safety criteria. An applicant for a...

  14. 10 CFR 32.27 - Same: Safety criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Same: Safety criteria. 32.27 Section 32.27 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.27 Same: Safety criteria. An applicant for a...

  15. 10 CFR 32.23 - Same: Safety criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Same: Safety criteria. 32.23 Section 32.23 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.23 Same: Safety criteria. An applicant for a...

  16. Shear-mode grinding force criteria of Zerodur and Pyrex

    NASA Astrophysics Data System (ADS)

    Hashimoto, Hiroshi; Imai, Kenichiro

    1995-08-01

    Experimental grinding of Zerodur and Pyrex demonstrated shear-mode grinding criteria (SM' GFC), which is a repeatable deterministic function of grinding conditions including materials and grinding wheels. Both criteria as with BK7 glass previously reported, are found to be the logarithmic function of removal rate.

  17. Interior Finishes. Floors, Walls, Ceilings: Performance Criteria. Interim Report.

    ERIC Educational Resources Information Center

    State Univ. Construction Fund, Albany, NY.

    A research program and the testing methods it developed are described, indicating the performance criteria of interior finishes for walls, ceilings and floors. Material exposure criteria are given with the probability of damage ratings for--(1) physical impact, (2) chemical damage, (3) biological, food and water damage. The relationship of…

  18. 40 CFR 227.31 - Applicable marine water quality criteria.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Applicable marine water quality criteria. 227.31 Section 227.31 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING CRITERIA FOR THE EVALUATION OF PERMIT APPLICATIONS FOR OCEAN DUMPING OF MATERIALS Definitions § 227.31 Applicable marine water...

  19. Expanded criteria donors.

    PubMed

    Feng, Sandy; Lai, Jennifer C

    2014-08-01

    The greatest challenge facing liver transplantation today is the shortage of donor livers. Demand far exceeds supply, and this deficit has driven expansion of what is considered an acceptable organ. The evolving standard has not come without costs, however, as each new frontier of expanded donor quality (i.e., advancing donor age, donation after cardiac death, and split liver) may have traded wait-list for post-transplant morbidity and mortality. This article delineates the nature and severity of risk associated with specific deceased donor liver characteristics and recommends strategies to maximally mitigate these risks. PMID:25017080

  20. Quartic Rotation Criteria and Algorithms.

    ERIC Educational Resources Information Center

    Clarkson, Douglas B.; Jennrich, Robert I.

    1988-01-01

    Most of the current analytic rotation criteria for simple structure in factor analysis are summarized and identified as members of a general symmetric family of quartic criteria. A unified development of algorithms for orthogonal and direct oblique rotation using arbitrary criteria from this family is presented. (Author/TJH)

  1. Criteria for Restructuring Postsecondary Education.

    ERIC Educational Resources Information Center

    Slaughter, Sheila

    1995-01-01

    Criteria most often used by higher education administrators in restructuring higher education in the 1980s and 1990s are outlined. A distinction is made between retrenchment and restructuring. Criteria recommended in the literature are compared with criteria actually used, and the results. Some alternatives are suggested. (MSE)

  2. Evaluation criteria for spectral design of camouflage

    NASA Astrophysics Data System (ADS)

    Škerlind, Christina; Fagerström, Jan; Hallberg, Tomas; Kariis, Hans

    2015-10-01

    In development of visual (VIS) and infrared (IR) camouflage for signature management, the aim is the design of surface properties of an object to spectrally match or adapt to a background and thereby minimizing the contrast perceived by a threatening sensor. The so called 'ladder model" relates the requirements for task measure of effectiveness with surface structure properties through the steps signature effectiveness and object signature. It is intended to link materials properties via platform signature to military utility and vice versa. Spectral design of a surface intends to give it a desired wavelength dependent optical response to fit a specific application of interest. Six evaluation criteria were stated, with the aim to aid the process to put requirement on camouflage and for evaluation. The six criteria correspond to properties such as reflectance, gloss, emissivity, and degree of polarization as well as dynamic properties, and broadband or multispectral properties. These criteria have previously been exemplified on different kinds of materials and investigated separately. Anderson and Åkerlind further point out that the six criteria rarely were considered or described all together in one and same publication previously. The specific level of requirement of the different properties must be specified individually for each specific situation and environment to minimize the contrast between target and a background. The criteria or properties are not totally independent of one another. How they are correlated is part of the theme of this paper. However, prioritization has been made due to the limit of space. Therefore all of the interconnections between the six criteria will not be considered in the work of this report. The ladder step previous to digging into the different material composition possibilities and choice of suitable materials and structures (not covered here), includes the object signature and decision of what the spectral response should be

  3. Is DSM widely accepted by Japanese clinicians?

    PubMed

    Someya, T; Takahashi, M; Takahashi, M

    2001-10-01

    The Diagnostic and Statistical Manual of Mental Disorders, 3rd edition (DSM-III), a new standardized diagnostic system with multiaxial diagnosis, operational criteria and renewed definitions of mental disorders, was introduced in 1980 and prompted movements to reform conventions in Japanese psychiatry. This review overviews the initial response of Japanese clinicians to accept DSM-III, and its effects on the development of systematic research of psychiatric diagnosis. These new research activities include those on reliability of psychiatric diagnosis, application of various evaluation tools, discussion on the concept of mental disorders, relation of personality disorders with depressive disorders, and Taijin-kyofusho, or culturally distinctive phobia in Japan. A reference database search to survey the latest trend on psychiatric research indicated that the number of papers published by Japanese workers increased sharply after 1987, and DSM apparently greatly influenced their internationalization. Twenty years after the publication of DSM-III, a questionnaire on the use of DSM-IV was set out in 2000 to survey how widely DSM is utilized in clinical practice in Japan. Two hundred and twelve psychiatrists answered the questionnaire, and the results show that DSM has been accepted positively by the younger generation, while the older generation (over 40s) has still less interest in DSM, and DSM is used mainly for research purposes rather than in daily practice.

  4. CHANGING RELEASE CRITERIA FROM PAST TO PRESENT

    SciTech Connect

    Graf, A.; Valencia, L.

    2003-02-27

    Beginning with the decommissioning of nuclear power plants the release, criteria for radioactive materials has gained importance significantly. After decommissioning and dismantling, most of the residues need not be treated as radioactive waste, since they contain only small amounts of radioactivity. The Karlsruhe Research Center already dismantled two research reactors completely (the Karlstein Super Heated Steam Reactor and the Niederaichbach Nuclear Power Plant), while several additional decommissioning projects are currently in progress. About 70 % of the total waste mass within each project can be released from the area of atomic regulations and licenses. At the Niederaichbach and Karlstein sites the release procedures and the release criteria were determined in the decommissioning license, where issues such as controlling and release values were fixed. Additionally, each step of the release process has to be coordinated with the regulator. Today the general release criteria are contained in the atomic act. Depending on the nature of the material to be released (e.g. building structures or metallic waste), and depending on the further use of the material, such as unrestricted reuse or waste disposal, release values for each nuclide are established. To prepare the release of materials, a release plan including the release measurement results is sent to the regulator, who has to officially approve the concept.

  5. Extending the Technology Acceptance Model: Policy Acceptance Model (PAM)

    NASA Astrophysics Data System (ADS)

    Pierce, Tamra

    There has been extensive research on how new ideas and technologies are accepted in society. This has resulted in the creation of many models that are used to discover and assess the contributing factors. The Technology Acceptance Model (TAM) is one that is a widely accepted model. This model examines people's acceptance of new technologies based on variables that directly correlate to how the end user views the product. This paper introduces the Policy Acceptance Model (PAM), an expansion of TAM, which is designed for the analysis and evaluation of acceptance of new policy implementation. PAM includes the traditional constructs of TAM and adds the variables of age, ethnicity, and family. The model is demonstrated using a survey of people's attitude toward the upcoming healthcare reform in the United States (US) from 72 survey respondents. The aim is that the theory behind this model can be used as a framework that will be applicable to studies looking at the introduction of any new or modified policies.

  6. 32 CFR 636.33 - Vehicle safety inspection criteria.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... above the vehicle manufacturer's designated height (49 CFR 570.8). (b) The criteria listed in paragraph... starburst or spider webbing effect greater than 3 inches by 3 inches. No opaque or solid material...

  7. 32 CFR 636.33 - Vehicle safety inspection criteria.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... above the vehicle manufacturer's designated height (49 CFR 570.8). (b) The criteria listed in paragraph... starburst or spider webbing effect greater than 3 inches by 3 inches. No opaque or solid material...

  8. 32 CFR 636.33 - Vehicle safety inspection criteria.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... above the vehicle manufacturer's designated height (49 CFR 570.8). (b) The criteria listed in paragraph... starburst or spider webbing effect greater than 3 inches by 3 inches. No opaque or solid material...

  9. 32 CFR 636.33 - Vehicle safety inspection criteria.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... above the vehicle manufacturer's designated height (49 CFR 570.8). (b) The criteria listed in paragraph... starburst or spider webbing effect greater than 3 inches by 3 inches. No opaque or solid material...

  10. 32 CFR 636.33 - Vehicle safety inspection criteria.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... above the vehicle manufacturer's designated height (49 CFR 570.8). (b) The criteria listed in paragraph... starburst or spider webbing effect greater than 3 inches by 3 inches. No opaque or solid material...

  11. Prediction and verification of creep behavior in metallic materials and components for the space shuttle thermal protection system. Volume 3, phase 3: Full size heat shield data correlation and design criteria. [reentry

    NASA Technical Reports Server (NTRS)

    Cramer, B. A.; Davis, J. W.

    1975-01-01

    Analysis methods for predicting cyclic creep deflection in stiffened metal panel structures, were applied to full size panels. Results were compared with measured deflections from cyclic tests of thin gage L605, Rene' 41, and TDNiCr full size corrugation stiffened panels. A design criteria was then formulated for metallic thermal protection panels subjected to creep. A computer program was developed to calculate creep deflections.

  12. Flammability, Odor, Offgassing, and Compatibility Requirements and Test Procedures for Materials in Environments that Support Combustion

    NASA Technical Reports Server (NTRS)

    1998-01-01

    This handbook establishes NASA program requirements for evaluation, testing, and selection of materials to preclude unsafe conditions related to flammability, odor, offgassing, and fluid compatibility. Materials intended for use in space vehicles, specified test facilities, and specified ground support equipment (GSE) must meet the requirements of this document. Additional materials performance requirements may be specified in other program or NASA center specific documentation. Responsible NASA centers materials organizations must include applicable requirements of this document in their materials control programs. Materials used in habitable areas of spacecraft, including the materials of the spacecraft, stowed equipment, and experiments, must be evaluated for flammability, odor, and offgassing characteristics. All materials used in other areas must be evaluated for flammability characteristics. In addition, materials that are exposed to liquid oxygen (LOX), gaseous oxygen (GOX), and other reactive fluids' must be evaluated for compatibility with the fluid in their use application. Materials exposed to pressurized breathing gases also must be evaluated for odor and offgassing characteristics. The worst-case anticipated use environment (most hazardous pressure, temperature, material thickness, and fluid exposure conditions) must be used in the evaluation process. Materials that have been shown to meet the criteria of the required tests are acceptable for further consideration in design. Whenever possible, materials should be selected that have already been shown to meet the test criteria in the use environment. Existing test data are compiled in the NASA Marshall Space Flight Center (MSFC) Materials and Processes Technical Information System (MAPTIS) and published periodically as the latest revision of a joint document with Johnson Space Center (JSC), MSFC-HDBK-527/JSC 09604. MAPTIS can be accessed by computer datalink. Systems containing materials that have not

  13. L-286 Acceptance Test Record

    SciTech Connect

    HARMON, B.C.

    2000-01-14

    This document provides a detailed account of how the acceptance testing was conducted for Project L-286, ''200E Area Sanitary Water Plant Effluent Stream Reduction''. The testing of the L-286 instrumentation system was conducted under the direct supervision

  14. Accepted scientific research works (abstracts).

    PubMed

    2014-01-01

    These are the 39 accepted abstracts for IAYT's Symposium on Yoga Research (SYR) September 24-24, 2014 at the Kripalu Center for Yoga & Health and published in the Final Program Guide and Abstracts. PMID:25645134

  15. Acceptance test report for the Westinghouse 100 ton hydraulic trailer

    SciTech Connect

    Barrett, R.A.

    1995-03-06

    The SY-101 Equipment Removal System 100 Ton Hydraulic Trailer was designed and built by KAMP Systems, Inc. Performance of the Acceptance Test Procedure at KAMP`s facility in Ontario, California (termed Phase 1 in this report) was interrupted by discrepancies noted with the main hydraulic cylinder. The main cylinder was removed and sent to REMCO for repair while the trailer was sent to Lampson`s facility in Pasco, Washington. The Acceptance Test Procedure was modified and performance resumed at Lampson (termed Phase 2 in this report) after receipt of the repaired cylinder. At the successful conclusion of Phase 2 testing the trailer was accepted as meeting all the performance criteria specified.

  16. FHR Generic Design Criteria

    SciTech Connect

    Flanagan, G.F.; Holcomb, D.E.; Cetiner, S.M.

    2012-06-15

    The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC)–based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

  17. FHR Generic Design Criteria

    SciTech Connect

    Flanagan, George F; Holcomb, David Eugene; Cetiner, Sacit M

    2012-06-01

    The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC) - based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

  18. Response criteria for glioma.

    PubMed

    Sorensen, A Gregory; Batchelor, Tracy T; Wen, Patrick Y; Zhang, Wei-Ting; Jain, Rakesh K

    2008-11-01

    The current method for assessing the response to therapy of glial tumors was described by Macdonald et al. in 1990. Under this paradigm, response categorization is determined on the basis of changes in the cross-sectional area of a tumor on neuroimaging, coupled with clinical assessment of neurological status and corticosteroid utilization. These categories of response have certain limitations; for example, cross-sectional assessment is not as accurate as volumetric assessment, which is now feasible. Disentangling antitumor effects of therapies from their effects on blood-brain barrier permeability can be challenging. The use of insufficient response criteria might be overestimating the true benefits of drugs in early-stage studies, and, therefore, such therapies could mistakenly move forward into later phases, only to result in disappointment when overall survival is measured. We propose that studies report both radiographic and clinical response rates, use volumetric rather than cross-sectional area to measure lesion size, and incorporate findings from mechanistic imaging and blood biomarker studies more frequently, and also suggest that investigators recognize the limitations of imaging biomarkers as surrogate end points.

  19. 46 CFR 164.013-4 - Samples submitted for acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Samples submitted for acceptance. 164.013-4 Section 164.013-4 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Foam, Unicellular Polyethylene (Buoyant, Slab,...

  20. 46 CFR 164.013-5 - Acceptance tests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Acceptance tests. 164.013-5 Section 164.013-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Foam, Unicellular Polyethylene (Buoyant, Slab, Slitted Trigonal...

  1. 46 CFR 164.013-4 - Samples submitted for acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Samples submitted for acceptance. 164.013-4 Section 164.013-4 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Foam, Unicellular Polyethylene (Buoyant, Slab,...

  2. 46 CFR 164.013-5 - Acceptance tests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Acceptance tests. 164.013-5 Section 164.013-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Foam, Unicellular Polyethylene (Buoyant, Slab, Slitted Trigonal...

  3. 46 CFR 164.013-5 - Acceptance tests.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Acceptance tests. 164.013-5 Section 164.013-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Foam, Unicellular Polyethylene (Buoyant, Slab, Slitted Trigonal...

  4. 46 CFR 164.013-5 - Acceptance tests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Acceptance tests. 164.013-5 Section 164.013-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Foam, Unicellular Polyethylene (Buoyant, Slab, Slitted Trigonal...

  5. 46 CFR 164.015-5 - Procedure for acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Procedure for acceptance. 164.015-5 Section 164.015-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape §...

  6. Developing criteria for pediatric/adolescent bariatric surgery programs.

    PubMed

    Michalsky, Marc; Kramer, Robert E; Fullmer, Michelle A; Polfuss, Michele; Porter, Renee; Ward-Begnoche, Wendy; Getzoff, Elizabeth A; Dreyer, Meredith; Stolzman, Stacy; Reichard, Kirk W

    2011-09-01

    The prevalence of morbid obesity in adolescents is rising at an alarming rate. Comorbidities known to predispose to cardiovascular disease are increasingly being diagnosed in these children. Bariatric surgery has become an acceptable treatment alternative for morbidly obese adults, and criteria have been developed to establish center-of-excellence designation for adult bariatric surgery programs. Evidence suggests that bariatric surgical procedures are being performed with increasing numbers in adolescents. We have examined and compiled the current expert recommendations for guidelines and criteria that are needed to deliver safe and effective bariatric surgical care to adolescents.

  7. Statistical methods for material characterization and qualification

    SciTech Connect

    Hunn, John D; Kercher, Andrew K

    2005-01-01

    This document describes a suite of statistical methods that can be used to infer lot parameters from the data obtained from inspection/testing of random samples taken from that lot. Some of these methods will be needed to perform the statistical acceptance tests required by the Advanced Gas Reactor Fuel Development and Qualification (AGR) Program. Special focus has been placed on proper interpretation of acceptance criteria and unambiguous methods of reporting the statistical results. In addition, modified statistical methods are described that can provide valuable measures of quality for different lots of material. This document has been written for use as a reference and a guide for performing these statistical calculations. Examples of each method are provided. Uncertainty analysis (e.g., measurement uncertainty due to instrumental bias) is not included in this document, but should be considered when reporting statistical results.

  8. Statistical Methods for Material Characterization and Qualification

    SciTech Connect

    Kercher, A.K.

    2005-04-01

    This document describes a suite of statistical methods that can be used to infer lot parameters from the data obtained from inspection/testing of random samples taken from that lot. Some of these methods will be needed to perform the statistical acceptance tests required by the Advanced Gas Reactor Fuel Development and Qualification (AGR) Program. Special focus has been placed on proper interpretation of acceptance criteria and unambiguous methods of reporting the statistical results. In addition, modified statistical methods are described that can provide valuable measures of quality for different lots of material. This document has been written for use as a reference and a guide for performing these statistical calculations. Examples of each method are provided. Uncertainty analysis (e.g., measurement uncertainty due to instrumental bias) is not included in this document, but should be considered when reporting statistical results.

  9. From requirements to acceptance tests

    NASA Technical Reports Server (NTRS)

    Baize, Lionel; Pasquier, Helene

    1993-01-01

    From user requirements definition to accepted software system, the software project management wants to be sure that the system will meet the requirements. For the development of a telecommunication satellites Control Centre, C.N.E.S. has used new rules to make the use of tracing matrix easier. From Requirements to Acceptance Tests, each item of a document must have an identifier. A unique matrix traces the system and allows the tracking of the consequences of a change in the requirements. A tool has been developed, to import documents into a relational data base. Each record of the data base corresponds to an item of a document, the access key is the item identifier. Tracing matrix is also processed, providing automatically links between the different documents. It enables the reading on the same screen of traced items. For example one can read simultaneously the User Requirements items, the corresponding Software Requirements items and the Acceptance Tests.

  10. In situ vitrification large-scale operational acceptance test analysis

    SciTech Connect

    Buelt, J.L.; Carter, J.G.

    1986-05-01

    A thermal treatment process is currently under study to provide possible enhancement of in-place stabilization of transuranic and chemically contaminated soil sites. The process is known as in situ vitrification (ISV). In situ vitrification is a remedial action process that destroys solid and liquid organic contaminants and incorporates radionuclides into a glass-like material that renders contaminants substantially less mobile and less likely to impact the environment. A large-scale operational acceptance test (LSOAT) was recently completed in which more than 180 t of vitrified soil were produced in each of three adjacent settings. The LSOAT demonstrated that the process conforms to the functional design criteria necessary for the large-scale radioactive test (LSRT) to be conducted following verification of the performance capabilities of the process. The energy requirements and vitrified block size, shape, and mass are sufficiently equivalent to those predicted by the ISV mathematical model to confirm its usefulness as a predictive tool. The LSOAT demonstrated an electrode replacement technique, which can be used if an electrode fails, and techniques have been identified to minimize air oxidation, thereby extending electrode life. A statistical analysis was employed during the LSOAT to identify graphite collars and an insulative surface as successful cold cap subsidence techniques. The LSOAT also showed that even under worst-case conditions, the off-gas system exceeds the flow requirements necessary to maintain a negative pressure on the hood covering the area being vitrified. The retention of simulated radionuclides and chemicals in the soil and off-gas system exceeds requirements so that projected emissions are one to two orders of magnitude below the maximum permissible concentrations of contaminants at the stack.

  11. The criteria for the evaluation of natural disasters in Russia

    NASA Astrophysics Data System (ADS)

    Gavrilova, Sofia

    2010-05-01

    Russia is a very vast country, it covers areas with different kinds of landscape and climate - from subartic tundra in northern parts to semideserts in southern, from artic to subtropic climate. Of course, in different types of regions there are different types of natural hazards. But still some of them can be found in every region (eg. low temperatures or heavy showers). In Russia the words "natural disasters" are very closely connected to "material damage". It means that every natural phenomenon that can cause a catastrophic situation should suit 2 types of criteria: geographical and social-economical. Geographical criteria can be meteorological or meteo-hydrological, etc. In 1990 the Ministry of Emergency situations and natural disasters was organized in Russia and these criteria were fixed. Since that time there were no changes. The problem is that actually there is no spatial differentiation in geographical criteria of manifestation of natural hazards in Russia. In fact you have the same criteria in Yakutsk in Siberia and Sochi on the Black Sea coast. This fact can cause many problems. Statistics show natural disasters which were caused by natural hazards, which do not suit proper geographical criteria - but there is still material damage and even people's death. That's why we propose to distinguish (according to statistics) different parameters of natural hazards, which can cause natural disasters and material damage in different parts and climatic zones of Russia. Also we have to reconsider these criteria according to today's climate situation.

  12. Consumer acceptance and carcass quality

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In commodity production systems, beef quality is designated based on the USDA grading criteria which take into account carcass marbling, maturity and yield. Producers are rewarded economically for beef quality grade (QG) of Choice versus Select although the price difference (spread) varies seasonal...

  13. Peer Assessment without Assessment Criteria

    ERIC Educational Resources Information Center

    Jones, Ian; Alcock, Lara

    2014-01-01

    Peer assessment typically requires students to judge peers' work against assessment criteria. We tested an alternative approach in which students judged pairs of scripts against one another in the absence of assessment criteria. First year mathematics undergraduates (N?=?194) sat a written test on conceptual understanding of multivariable…

  14. Criteria for Evaluating Advancement Programs.

    ERIC Educational Resources Information Center

    Heemann, Warren, Ed.

    Criteria for evaluating college and university advancement programs are presented, based on the efforts of professional area trustees and advisory committees of the Council for Advancement and Support of Education (CASE). The criteria can be useful in three ways: as the basis of internal audits of advancement programs or program components; as the…

  15. 7 CFR 1728.30 - Inclusion of an item for listing or technical acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... acceptance. Items accepted subject to certain conditions, such as limited use to gain service experience, or... submitting a letter to the Administrator requesting such a review. (h) Change in Design. RUS acceptance of an item will be conditioned on the understanding that no design changes (material or dimensions)...

  16. [Diagnostic criteria in acute neuromyelitis].

    PubMed

    Panea, Cristina; Petrescu, Simona; Monica, Pop; Voinea, Liliana; Dascălu, Ana-Maria; Nicolae, Miruna; Ungureanu, E; Panca, Aida; Grădinaru, Sânziana

    2007-01-01

    Neuromyelitis optica, also known as Devic disease, was identified in the 19th century, is one of the inflammatory idiopathic demyelinating diseases of the central nervous system, often mistaken for severe multiple sclerosis. In 1999 it had been proposed diagnostic criteria for neuromyelitis optica, but in 2006 these criteria were revised by Dean Wingerchuck. These criteria are 99% sensitive and 90% specific for differentiating neuromyelitis optica from multiple sclerosis that present with optic neuritis or a myelitis syndrome. In the following article we present clinical, spinal and cerebral MR imaging, serological and aspects of cerebrospinal fluid examination features of neuromyelitis optica and the revised criteria of neuromyelitis optica established in 2006. The recently identified serum antibody biomarker: neuromyelitis optica immunoglobulin G (NMO Ig G), which target aquaporin 4 water channel, distinguish neuromyelitis optica from multiple sclerosis, is one of the revised criteria of neuromyelitis optica. PMID:18543687

  17. Accelerated aging of polymer composite bridge materials

    NASA Astrophysics Data System (ADS)

    Carlson, Nancy M.; Blackwood, Larry G.; Torres, Lucinda L.; Rodriguez, Julio G.; Yoder, Timothy S.

    1999-05-01

    Accelerated aging research on samples of composite materials and candidate UV protective coatings is determining the effects of six environmental factors on material durability. Candidate fastener materials are being evaluated to determine corrosion rates and crevice corrosion effects at load-bearing joints. This work supports field testing of a 30-ft long, 18-ft wide polymer matrix composite (PMC) bridge at the Idaho National Engineering and Environmental Laboratory. Durability results and sensor data form test with live loads provide information required for determining the cost/benefit measures to use in life-cycle planning, determining a maintenance strategy, establishing applicable inspection techniques, and establishing guidelines, standards and acceptance criteria for PMC bridges for use in the transportation infrastructure.

  18. Accelerated Aging of Polymer Composite Bridge Materials

    SciTech Connect

    Carlson, Nancy Margaret; Blackwood, Larry Gene; Torres, Lucinda Laine; Rodriguez, Julio Gallardo; Yoder, Timothy Scott

    1999-03-01

    Accelerated aging research on samples of composite material and candidate ultraviolet (UV) protective coatings is determining the effects of six environmental factors on material durability. Candidate fastener materials are being evaluated to determine corrosion rates and crevice corrosion effects at load-bearing joints. This work supports field testing of a 30-ft long, 18-ft wide polymer matrix composite (PMC) bridge at the Idaho National Engineering and Environmental Laboratory (INEEL). Durability results and sensor data from tests with live loads provide information required for determining the cost/benefit measures to use in life-cycle planning, determining a maintenance strategy, establishing applicable inspection techniques, and establishing guidelines, standards, and acceptance criteria for PMC bridges for use in the transportation infrastructure.

  19. Material selection

    SciTech Connect

    Tucker, W.G.

    1990-08-01

    The paper summarizes various criteria that can be used in selecting material used in the construction, furnishing, maintenance, and operation of a building. It also summarizes the types of material and product testing that can be especially useful in the selection process. In broad terms, materials in buildings are classified as building materials, furnishings, maintenance materials, and other contents. At any given time, emissions from materials and products in any of these four categories can dominate the impact on indoor air quality (IAQ) in a building. Responsibility for the selection of these materials may be that of the designer, owner, or occupants. Information on IAQ impacts of materials therefore needs to be developed for a wide range of people.

  20. Imaginary Companions and Peer Acceptance

    ERIC Educational Resources Information Center

    Gleason, Tracy R.

    2004-01-01

    Early research on imaginary companions suggests that children who create them do so to compensate for poor social relationships. Consequently, the peer acceptance of children with imaginary companions was compared to that of their peers. Sociometrics were conducted on 88 preschool-aged children; 11 had invisible companions, 16 had personified…

  1. Acceptance of Others (Number Form).

    ERIC Educational Resources Information Center

    Masters, James R.; Laverty, Grace E.

    As part of the instrumentation to assess the effectiveness of the Schools Without Failure (SWF) program in 10 elementary schools in the New Castle, Pa. School District, the Acceptance of Others (Number Form) was prepared to determine pupil's attitudes toward classmates. Given a list of all class members, pupils are asked to circle a number from 1…

  2. W-025, acceptance test report

    SciTech Connect

    Roscha, V.

    1994-10-04

    This acceptance test report (ATR) has been prepared to establish the results of the field testing conducted on W-025 to demonstrate that the electrical/instrumentation systems functioned as intended by design. This is part of the RMW Land Disposal Facility.

  3. Euthanasia Acceptance: An Attitudinal Inquiry.

    ERIC Educational Resources Information Center

    Klopfer, Fredrick J.; Price, William F.

    The study presented was conducted to examine potential relationships between attitudes regarding the dying process, including acceptance of euthanasia, and other attitudinal or demographic attributes. The data of the survey was comprised of responses given by 331 respondents to a door-to-door interview. Results are discussed in terms of preferred…

  4. Helping Our Children Accept Themselves.

    ERIC Educational Resources Information Center

    Gamble, Mae

    1984-01-01

    Parents of a child with muscular dystrophy recount their reactions to learning of the diagnosis, their gradual acceptance, and their son's resistance, which was gradually lessened when he was provided with more information and treated more normally as a member of the family. (CL)

  5. Acceptance and Commitment Therapy: Introduction

    ERIC Educational Resources Information Center

    Twohig, Michael P.

    2012-01-01

    This is the introductory article to a special series in Cognitive and Behavioral Practice on Acceptance and Commitment Therapy (ACT). Instead of each article herein reviewing the basics of ACT, this article contains that review. This article provides a description of where ACT fits within the larger category of cognitive behavior therapy (CBT):…

  6. Who accepts first aid training?

    PubMed

    Pearn, J; Dawson, B; Leditschke, F; Petrie, G; Nixon, J

    1980-09-01

    The percentage of individuals trained in first aid skills in the general community is inadequate. We report here a study to investigate factors which influence motivation to accept voluntary training in first aid. A group of 700 randomly selected owners of inground swimming pools (a parental high-risk group) was offered a course of formal first aid instruction. Nine per cent attended the offered training course. The time commitment involved in traditional courses (eight training nights spread over four weeks) is not a deterrent, the same percentage accepting such courses as that who accept a course of one night's instruction. Cost is an important deterrent factor, consumer resistance rising over 15 cost units (one cost unit = the price of a loaf of bread). The level of competent first aid training within the community can be raised by (a) keeping to traditional course content, but (b) by ensuring a higher acceptance rate of first aid courses by a new approach to publicity campaigns, to convince prospective students of the real worth of first aid training. Questions concerning who should be taught first aid, and factors influencing motivation, are discussed.

  7. Application of optimality criteria in structural synthesis

    NASA Technical Reports Server (NTRS)

    Terai, K.

    1974-01-01

    The rational use of optimality criteria was investigated for a class of structural synthesis problems where materials, configuration and applied load conditions are specified, and the minimum weight design is to be determined. The potential of hybrid methods of structural optimization for dealing with relatively large design problems involving practical complexity was explored. The reduced basis concept in design space was used to decrease the number of generalized design variables dealt with by the mathematical programming algorithm. Optimality criteria methods for obtaining design vectors associated with displacement, system buckling and natural frequency constraints are presented. A stress ratio method was used to generate a basis design vector representing the stress constraints. The finite element displacement method was used as the basic structural analysis tool. Results for several examples of truss systems subject to stress, displacement and minimum size constraints are presented. An assessment of these results indicates the effectiveness of the hybrid method developed.

  8. Update on diagnosis of acute rheumatic fever: 2015 Jones criteria

    PubMed Central

    Eroğlu, Ayşe Güler

    2016-01-01

    In the final Jones criteria, different diagnostic criteria were established for the diagnosis of acute rheumatic fever for low risk and moderate-high risk populations. Turkey was found to be compatible with moderate-high risk populations as a result of regional screenings performed in terms of acute rheumatic fever and rheumatic heart disease. The changes in the diagnostic criteria for low-risk populations include subclinical carditis found on echocardiogram as a major criterion in addition to carditis found clinically and a body temperature of 38.5°C and above as a minor criterion. In moderate-high risk populations including Turkey, subclinical carditis found on echocardiogram in addition to clinical carditis is used as a major criterion as a new amendment. In addition, aseptic monoarthritis and polyarthralgia are used as major criteria in addition to migratory arthritis and monoarhtralgia is used as a minor criterion among joint findings. However, differentiation of subclinical carditis from physiological valve regurgitation found in healthy individuals and exclusion of other diseases involving joints when aseptic monoarthritis and polyarthralgia are used as major criteria are very important. In addition, a body temperature of 38°C and above and an erythrocyte sedimentation rate of 30 mm/h and above have been accepted as minor criteria. The diagnostic criteria for the first attack have not been changed; three minor findings have been accepted in presence of previous sterptococcal infection in addition to the old cirteria for recurrent attacks. In the final Jones criteria, it has been recommended that patients who do not fully meet the diagnostic criteria of acute rheumatic fever should be treated as acute rheumatic fever if another diagnosis is not considered and should be followed up with benzathine penicilin prophylaxis for 12 months. It has been decided that these patients be evaluated 12 months later and a decision for continuation or discontinuation of

  9. Material Properties Test to Determine Ultimate Strain and True Stress-True Strain Curves for High Yield Steels

    SciTech Connect

    K.R. Arpin; T.F. Trimble

    2003-04-01

    This testing was undertaken to develop material true stress-true strain curves for elastic-plastic material behavior for use in performing transient analysis. Based on the conclusions of this test, the true stress-true strain curves derived herein are valid for use in elastic-plastic finite element analysis for structures fabricated from these materials. In addition, for the materials tested herein, the ultimate strain values are greater than those values cited as the limits for the elastic-plastic strain acceptance criteria for transient analysis.

  10. Comparison of Accreditation Criteria: CBHDP, NLN, and COA Accreditation Criteria.

    ERIC Educational Resources Information Center

    Frels, Lois; Horton, Betty

    1991-01-01

    Presents a detailed comparison of similarities and differences in the accreditation criteria of two nursing accrediting agencies--the National League for Nursing and the Council on Accreditation--as they relate to nurse anesthesiology programs. (JOW)

  11. Acceptable Knowledge Summary Report for Waste Stream: SR-T001-221F-HET/Drums

    SciTech Connect

    Lunsford, G.F.

    1999-06-14

    This report is fully responsive to the requirements of Section 4.0 Acceptable Knowledge from the WIPP Transuranic Waste Characterization Quality Assurance Plan, CAO-94-1010, and provides a sound, (and auditable) characterization that satisfies the WIPP criteria for Acceptable Knowledge.

  12. Selection of donor and organ viability criteria: expanding donation criteria.

    PubMed

    Gutiérrez, E; Andrés, A

    2007-01-01

    Donation criteria have been becoming more flexible over the years. Currently, the only absolute exclusion criteria are human immunodeficiency virus infection (HIV), uncontrolled tumor disease and bacterial or viral infections. ClinicaL. conditions dictate organ viability criteria: biochemical, morphological and functional, that must be fulfilled by the donors and their organs in order to focus the decision on which donor organs can be used. These criteria attempt to assure that the transplanted organs function after the extraction, transformation, implantation and reperfusion process without transmitting any infectious or tumour disease. In recent years, the gross and microscopic appearance has become one of the fundamental criteria for selection of potentially viable organs. At present, there is no age limit for hepatic and renal donation; the principal contra-indication is chronic organ damage. The use of each organ must be decided individually after a profound analysis of all the viability criteria, weighing the advantages and disadvantages of the implant of a certain organ for the recipient. PMID:17702512

  13. Detection methods and performance criteria for genetically modified organisms.

    PubMed

    Bertheau, Yves; Diolez, Annick; Kobilinsky, André; Magin, Kimberly

    2002-01-01

    Detection methods for genetically modified organisms (GMOs) are necessary for many applications, from seed purity assessment to compliance of food labeling in several countries. Numerous analytical methods are currently used or under development to support these needs. The currently used methods are bioassays and protein- and DNA-based detection protocols. To avoid discrepancy of results between such largely different methods and, for instance, the potential resulting legal actions, compatibility of the methods is urgently needed. Performance criteria of methods allow evaluation against a common standard. The more-common performance criteria for detection methods are precision, accuracy, sensitivity, and specificity, which together specifically address other terms used to describe the performance of a method, such as applicability, selectivity, calibration, trueness, precision, recovery, operating range, limit of quantitation, limit of detection, and ruggedness. Performance criteria should provide objective tools to accept or reject specific methods, to validate them, to ensure compatibility between validated methods, and be used on a routine basis to reject data outside an acceptable range of variability. When selecting a method of detection, it is also important to consider its applicability, its field of applications, and its limitations, by including factors such as its ability to detect the target analyte in a given matrix, the duration of the analyses, its cost effectiveness, and the necessary sample sizes for testing. Thus, the current GMO detection methods should be evaluated against a common set of performance criteria.

  14. Criteria for acceptable levels of the Shinkansen Super Express train noise and vibration in residential areas

    NASA Astrophysics Data System (ADS)

    Yamanaka, K.; Nakagawa, T.; Kobayashi, F.; Kanada, S.; Tanahashi, M.; Muramatsu, T.; Yamada, S.

    1982-10-01

    A survey of 1187 housewives living in 18 areas along the Shinkansen Super Express (bullet train) railway was conducted by means of a self-administered health questionnaire (modified Cornell Medical Index). In addition, geographically corresponding measurements of noise level and vibration intensity were taken. The relationship of noise and vibration to positive responses (health complaints) related to bodily symptoms, illness and emotional disturbances was analyzed. The factors which correlated with an increase in the average number of positive responses included noise, vibration, age and health status. Such factors as marital status, educational level, part time work, duration of inhabitancy and occupation of the head of the houshold correlated poorly with the number of positive responses. Unhealthy respondents compared to healthy respondents are more frequently affected by noise and vibration. The rate of positive responses in the visual, respiratory, cardiovascular, digestive and nervous systems, sleep disturbances and emotional disturbances increased accordingly as noise and vibration increased. Combined effects of noise and vibration stimuli on the total number of positive responses (an indicator of general health) were found. This study has produced results indicating that the maximum permissible noise level should not exceed 70 dB(A) in the residential areas along the Shinkansen railway.

  15. [Pandemic influenza vaccines. Concepts, European mock-up licenses, and acceptance criteria].

    PubMed

    Pfleiderer, M

    2010-12-01

    The concept of identifying appropriate scientific and regulatory principles to ensure rapid availability of pandemic influenza vaccines when needed were already developed starting in the year 2003. These principles allowed licensing of three so-called mock-up vaccines far ahead of any real presenting pandemic event. Those licenses (Marketing Authorizations) were immediately adapted to the novel H1N1 strain shortly after its identification in April 2009 ensuring that as early as September 2009 large parts of the German as well as of the EU population had access to licensed products which had undergone sufficient evaluation before first use in humans. In contrast, for pandemic vaccine concepts without a previously licensed mock-up version it generally took twice as much time to accumulate data supporting the granting of a Marketing Authorization. This article describes in detail the translation of concepts of producing, testing, and licensing of pandemic influenza vaccines into practice under real conditions. PMID:21161474

  16. 78 FR 65007 - Inspections, Tests, Analyses, and Acceptance Criteria; Vogtle Electric Generating Plant, Unit 3

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-30

    ...-available information related to this action by the following methods: Federal Rulemaking Web site: Go to..., select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with... updates to the status of this ITAAC will be reflected on the NRC's Web site at...

  17. 78 FR 38411 - Vogtle Electric Generating Plant, Unit 4; Inspections, Tests, Analyses, and Acceptance Criteria

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-26

    ... of the following methods: Federal Rulemaking Web site: Go to http://www.regulations.gov and search... select ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the NRC's Public... will be reflected on the NRC's Web site at...

  18. 77 FR 51880 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-28

    ...; Standard Design Certifications; and Combined Licenses for Nuclear Power Reactors'' on April 18, 1989 (54 FR... construction was complete. (See 54 FR 15372; April 18, 1989; at 15383 (second column)). On August 28, 2007 (72 FR 49352), the Commission revised 10 CFR part 52 to enhance the NRC's regulatory effectiveness...

  19. Acceptance criteria for welds in ASTM A106 grade B steel pipe and plate

    NASA Technical Reports Server (NTRS)

    Hudson, C. M.; Wright, D. B., Jr.; Leis, B. N.

    1986-01-01

    Based on the RECERT Program findings, NASA-Langley funded a fatigue study of code-unacceptable welds. Usage curves were developed which were based on the structural integrity of the welds. The details of this study are presented in NASA CR-178114. The information presented is a condensation and reinterpretation of the information in NASA CR-178114. This condensation and reinterpretation generated usage curves for welds having: (1) indications 0.20 -inch deep by 0.40-inch long, and (2) indications 0.195-inch deep by 8.4-inches long. These curves were developed using the procedures used in formulating the design curves in Section VIII, Division 2 of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code.

  20. Improved Criteria for Acceptable Yield Point Elongation in Surface Critical Steels

    SciTech Connect

    Dr. David Matlock; Dr. John Speer

    2007-05-30

    Yield point elongation (YPE) is considered undesirable in surface critical applications where steel is formed since "strain lines" or Luders bands are created during forming. This project will examine in detail the formation of luders bands in industrially relevant strain states including the influence of substrate properties and coatings on Luders appearance. Mechanical testing and surface profilometry were the primary methods of investigation.

  1. Microneedle characterisation: the need for universal acceptance criteria and GMP specifications when moving towards commercialisation.

    PubMed

    Lutton, Rebecca E M; Moore, Jessica; Larrañeta, Eneko; Ligett, Stephen; Woolfson, A David; Donnelly, Ryan F

    2015-08-01

    With interest in microneedles as a novel drug transdermal delivery system increasing rapidly since the late 1990s (Margetts and Sawyer Contin Educ Anaesthesia Crit Care Pain. 7(5):171-76, 2007), a diverse range of microneedle systems have been fabricated with varying designs and dimensions. However, there are still very few commercially available microneedle products. One major issue regarding microneedle manufacture on an industrial scale is the lack of specific quality standards for this novel dosage form in the context of Good Manufacturing Practice (GMP). A range of mechanical characterisation tests and microneedle insertion analysis techniques are used by researchers working on microneedle systems to assess the safety and performance profiles of their various designs. The lack of standardised tests and equipment used to demonstrate microneedle mechanical properties and insertion capability makes it difficult to directly compare the in use performance of candidate systems. This review highlights the mechanical tests and insertion analytical techniques used by various groups to characterise microneedles. This in turn exposes the urgent need for consistency across the range of microneedle systems in order to promote innovation and the successful commercialisation of microneedle products.

  2. Nutritional Criteria for Military Rations and Effects of Prolonged Feeding on Acceptability

    NASA Technical Reports Server (NTRS)

    Schnakenberg, D.

    1985-01-01

    Broad nutritional policies for operational rations are designed to insure that the nutritional content of the rations served will sustain combat effectiveness. Concern exists that these rations, although nutritionally complete, would become monotonous because of limited variety causing nutrient intake to decrease and body weight losses to occur with adverse effects on morale and combat effectiveness. Whenever possible, troops are now fed one or two hot meals per day containing fresh foods and a much greater variety of foods than are available in packaged rations. A laboratory test was conducted with student volunteers and the results are discussed.

  3. 46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... the applicable subpart of this part, and any other manufacturer's identifying data. No two components... showing details and dimensions of the mechanism. (7) A statement of dimensional and performance...

  4. 46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... the applicable subpart of this part, and any other manufacturer's identifying data. No two components... showing details and dimensions of the mechanism. (7) A statement of dimensional and performance...

  5. 46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... the applicable subpart of this part, and any other manufacturer's identifying data. No two components... showing details and dimensions of the mechanism. (7) A statement of dimensional and performance...

  6. 46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... the applicable subpart of this part, and any other manufacturer's identifying data. No two components... showing details and dimensions of the mechanism. (7) A statement of dimensional and performance...

  7. 46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... the applicable subpart of this part, and any other manufacturer's identifying data. No two components... showing details and dimensions of the mechanism. (7) A statement of dimensional and performance...

  8. Acceptance test procedure for the MO-293 (1722) 10-wide mobile office

    SciTech Connect

    Wallace, S.C.

    1994-12-28

    This Acceptance Test Procedure has been prepared to demonstrate that the Fire Protection System functions as required by project criteria. The test results will be issued as an acceptance test report after all the testing is complete. This facility is part of the Spent Nuclear Fuel Project. An appendix is provided as a checklist of activities to be performed by the fire alarm system installer to ensure proper installation and operation.

  9. Accepting the T3D

    SciTech Connect

    Rich, D.O.; Pope, S.C.; DeLapp, J.G.

    1994-10-01

    In April, a 128 PE Cray T3D was installed at Los Alamos National Laboratory`s Advanced Computing Laboratory as part of the DOE`s High-Performance Parallel Processor Program (H4P). In conjunction with CRI, the authors implemented a 30 day acceptance test. The test was constructed in part to help them understand the strengths and weaknesses of the T3D. In this paper, they briefly describe the H4P and its goals. They discuss the design and implementation of the T3D acceptance test and detail issues that arose during the test. They conclude with a set of system requirements that must be addressed as the T3D system evolves.

  10. Sweeteners: consumer acceptance in tea.

    PubMed

    Sprowl, D J; Ehrcke, L A

    1984-09-01

    Sucrose, fructose, aspartame, and saccharin were compared for consumer preference, aftertaste, and cost to determine acceptability of the sweeteners. A 23-member taste panel evaluated tea samples for preference and aftertaste. Mean retail cost of the sweeteners were calculated and adjusted to take sweetening power into consideration. Sucrose was the least expensive and most preferred sweetener. No significant difference in preference for fructose and aspartame was found, but both sweeteners were rated significantly lower than sucrose. Saccharin was the most disliked sweetener. Fructose was the most expensive sweetener and aspartame the next most expensive. Scores for aftertaste followed the same pattern as those for preference. Thus, a strong, unpleasant aftertaste seems to be associated with a dislike for a sweetener. From the results of this study, it seems that there is no completely acceptable low-calorie substitute for sucrose available to consumers.

  11. Application of the Supreme Court's Daubert criteria in radiation litigation.

    PubMed

    Merwin, S E; Moeller, D W; Kennedy, W E; Moeller, M P

    2001-12-01

    In 1993, the U.S. Supreme Court set forth the standard for determining the admissibility of expert scientific evidence in litigation. This standard is known as the Daubert criteria, named after the pertinent case, Daubert v. Merrell Dow Pharmaceuticals, Inc. The Daubert criteria require the courts to determine whether an expert's testimony reflects scientific knowledge, whether his/her findings are derived by the scientific method, and whether the work product is based on good science. The Daubert criteria are especially important in radiation litigation because issues involving radiation doses and effects are often complex and thus a jury will typically rely heavily on the analysis and opinions of experts. According to the Daubert criteria, scientific opinions must be based on a methodology that has a valid, testable hypothesis; has been subject to peer review; and is generally accepted in the scientific community. Additionally, the expert must be qualified to present opinions based on the methodology. Although the application of the Daubert criteria in radiation litigation is highly dependent on the specific court and judge presiding over the case, there have been recent high-profile cases in which application of the criteria has resulted in the dismissal of analysis and opinions offered by scientific experts. Reasons for the dismissals have included basic scientific errors such as failure of the expert to consider all possible explanations for an observed phenomenon, the selective use of data by the expert, and the failure to acknowledge and resolve inconsistencies between the expert's results and those of other investigators. This paper reviews the Daubert criteria as they apply to radiation litigation and provides examples of the application of the criteria from recent judgments involving the Three Mile Island and Hanford Downwinders cases. PMID:11725885

  12. New diagnostic criteria for neurocysticercosis: Reliability and validity

    PubMed Central

    Fleury, Agnès; Romo, Matthew L.; Abraham, Ronaldo; Fandiño, Jaime; Durán, Juan C.; Cárdenas, Graciela; Moncayo, Jorge; Leite Rodrigues, Cleonísio; San‐Juan, Daniel; Serrano‐Dueñas, Marcos; Takayanagui, Oswaldo; Sander, Josemir W.

    2016-01-01

    Objective The diagnosis of neurocysticercosis (NCC) remains problematic because of the heterogeneity of its clinical, immunological, and imaging characteristics. Our aim was to develop and assess a new set of diagnostic criteria for NCC, which might allow for the accurate detection of, and differentiation between, parenchymal and extraparenchymal disease. Methods A group of Latin American NCC experts developed by consensus a new set of diagnostic criteria for NCC. A multicenter, retrospective study was then conducted to validate it. The reference standard for diagnosis of active NCC was the disappearance or reduction of cysts after anthelmintic treatment. In total, three pairs of independent neurologists blinded to the diagnosis evaluated 93 cases (with NCC) and 93 controls (without NCC) using the new diagnostic criteria. Mixed‐effects logistic regression models were used to estimate sensitivity and specificity. Results Inter‐rater reliability (kappa) of diagnosis among evaluators was 0.60. For diagnosis of NCC versus no NCC, the new criteria had a sensitivity of 93.2% and specificity of 81.4%. For parenchymal NCC, the new criteria had a sensitivity of 89.8% and specificity of 80.7% and for extraparenchymal NCC, the new criteria had a sensitivity of 65.9% and specificity of 94.9%. Interpretation These criteria have acceptable reliability and validity and could be a new tool for clinicians and researchers. An advantage of the new criteria is that they consider parasite location (ie, parenchymal or extraparenchymal), which is an important factor determining the clinical, immunological, and radiological presentation of the disease, and importantly, its treatment and prognosis. Ann Neurol 2016;80:434–442 PMID:27438337

  13. ENVIRONMENTALLY SOUND DISPOSAL OF RADIOACTIVE MATERIALS AT A RCRA HAZARDOUS WASTE DISPOSAL FACILITY

    SciTech Connect

    Romano, Stephen; Welling, Steven; Bell, Simon

    2003-02-27

    The use of hazardous waste disposal facilities permitted under the Resource Conservation and Recovery Act (''RCRA'') to dispose of low concentration and exempt radioactive materials is a cost-effective option for government and industry waste generators. The hazardous and PCB waste disposal facility operated by US Ecology Idaho, Inc. near Grand View, Idaho provides environmentally sound disposal services to both government and private industry waste generators. The Idaho facility is a major recipient of U.S. Army Corps of Engineers FUSRAP program waste and received permit approval to receive an expanded range of radioactive materials in 2001. The site has disposed of more than 300,000 tons of radioactive materials from the federal government during the past five years. This paper presents the capabilities of the Grand View, Idaho hazardous waste facility to accept radioactive materials, site-specific acceptance criteria and performance assessment, radiological safety and environmental monitoring program information.

  14. Launch Commit Criteria Monitoring Agent

    NASA Technical Reports Server (NTRS)

    Semmel, Glenn S.; Davis, Steven R.; Leucht, Kurt W.; Rowe, Dan A.; Kelly, Andrew O.; Boeloeni, Ladislau

    2005-01-01

    The Spaceport Processing Systems Branch at NASA Kennedy Space Center has developed and deployed a software agent to monitor the Space Shuttle's ground processing telemetry stream. The application, the Launch Commit Criteria Monitoring Agent, increases situational awareness for system and hardware engineers during Shuttle launch countdown. The agent provides autonomous monitoring of the telemetry stream, automatically alerts system engineers when predefined criteria have been met, identifies limit warnings and violations of launch commit criteria, aids Shuttle engineers through troubleshooting procedures, and provides additional insight to verify appropriate troubleshooting of problems by contractors. The agent has successfully detected launch commit criteria warnings and violations on a simulated playback data stream. Efficiency and safety are improved through increased automation.

  15. Acceptability of reactors in space

    SciTech Connect

    Buden, D.

    1981-01-01

    Reactors are the key to our future expansion into space. However, there has been some confusion in the public as to whether they are a safe and acceptable technology for use in space. The answer to these questions is explored. The US position is that when reactors are the preferred technical choice, that they can be used safely. In fact, it does not appear that reactors add measurably to the risk associated with the Space Transportation System.

  16. Acceptability of reactors in space

    SciTech Connect

    Buden, D.

    1981-04-01

    Reactors are the key to our future expansion into space. However, there has been some confusion in the public as to whether they are a safe and acceptable technology for use in space. The answer to these questions is explored. The US position is that when reactors are the preferred technical choice, that they can be used safely. In fact, it dies not appear that reactors add measurably to the risk associated with the Space Transportation System.

  17. Correctness criteria for process migration

    NASA Technical Reports Server (NTRS)

    Lu, Chin; Liu, J. W. S.

    1987-01-01

    Two correctness criteria, the state consistency criterion and the property consistency criterion for process migration are discussed. The state machine approach is used to model the interactions between a user process and its environment. These criteria are defined in terms of the model. The idea of environment view was introduced to distinguish what a user process observes about its environment from what its environment state really is and argue that a consistent view of the environment must be maintained for every migrating process.

  18. Determination of criteria weights in solving multi-criteria problems

    NASA Astrophysics Data System (ADS)

    Kasim, Maznah Mat

    2014-12-01

    A multi-criteria (MC) problem comprises of units to be analyzed under a set of evaluation criteria. Solving a MC problem is basically the process of finding the overall performance or overall quality of the units of analysis by using certain aggregation method. Based on these overall measures of each unit, a decision can be made whether to sort them, to select the best or to group them according to certain ranges. Prior to solving the MC problems, the weights of the related criteria have to be determined with the assumption that the weights represent the degree of importance or the degree of contribution towards the overall performance of the units. This paper presents two main approaches which are called as subjective and objective approaches, where the first one involves evaluator(s) while the latter approach depends on the intrinsic information contained in each criterion. The subjective and objective weights are defined if the criteria are assumed to be independent with each other, but if they are dependent, there is another type of weight, which is called as monotone measure weight or compound weights which represent degree of interaction among the criteria. The measure of individual weights or compound weights must be addressed in solving multi-criteria problems so that the solutions are more reliable since in the real world, evaluation criteria always come with different degree of importance or are dependent with each other. As the real MC problems have their own uniqueness, it is up to the decision maker(s) to decide which type of weights and which method are the most applicable ones for the problem under study.

  19. 48 CFR 12.402 - Acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Acceptance. 12.402 Section... Acceptance. (a) The acceptance paragraph in 52.212-4 is based upon the assumption that the Government will rely on the contractor's assurances that the commercial item tendered for acceptance conforms to...

  20. Importing biological materials.

    PubMed

    Wolf, P

    2001-05-01

    This overview discusses critical issues regarding importing of restricted biological materials along with criteria for handling these materials. Guidelines for importing non-restricted biological materials are also covered. Recommendations are given for packaging biological materials for export, and finally, the necessary steps for obtaining an import permit application are outlined. PMID:18429071

  1. Design of an RF Antenna for a Large0Bore, High Power, Steady State Plasma Processing Chamber for Material Separation

    SciTech Connect

    Rasmussen, D.A.; Freeman, R.L.

    2001-11-07

    The purpose of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC, (Contractor), and Archimedes Technology Group, (Participant) is to evaluate the design of an RF antenna for a large-bore, high power, steady state plasma processing chamber for material separation. Criteria for optimization will be to maximize the power deposition in the plasma while operating at acceptable voltages and currents in the antenna structure. The project objectives are to evaluate the design of an RF antenna for a large-bore, high power, steady state plasma processing chamber for material separation. Criteria for optimization will be to maximize the power deposition in the plasma while operating at acceptable voltages and currents in the antenna structure.

  2. 46 CFR 50.25-10 - Acceptance of piping components by specific letter or approved plan.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) MARINE ENGINEERING GENERAL PROVISIONS Acceptance of Material and Piping Components § 50.25-10 Acceptance... approved plan must do the following: (1) Submit an engineering type catalog or representative drawings of... specifications by comparing details of the materials' chemical composition, mechanical properties, method...

  3. 46 CFR 50.25-10 - Acceptance of piping components by specific letter or approved plan.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) MARINE ENGINEERING GENERAL PROVISIONS Acceptance of Material and Piping Components § 50.25-10 Acceptance... approved plan must do the following: (1) Submit an engineering type catalog or representative drawings of... specifications by comparing details of the materials' chemical composition, mechanical properties, method...

  4. 46 CFR 50.25-10 - Acceptance of piping components by specific letter or approved plan.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) MARINE ENGINEERING GENERAL PROVISIONS Acceptance of Material and Piping Components § 50.25-10 Acceptance... approved plan must do the following: (1) Submit an engineering type catalog or representative drawings of... specifications by comparing details of the materials' chemical composition, mechanical properties, method...

  5. 46 CFR 50.25-10 - Acceptance of piping components by specific letter or approved plan.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) MARINE ENGINEERING GENERAL PROVISIONS Acceptance of Material and Piping Components § 50.25-10 Acceptance... approved plan must do the following: (1) Submit an engineering type catalog or representative drawings of... specifications by comparing details of the materials' chemical composition, mechanical properties, method...

  6. 46 CFR 50.25-10 - Acceptance of piping components by specific letter or approved plan.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) MARINE ENGINEERING GENERAL PROVISIONS Acceptance of Material and Piping Components § 50.25-10 Acceptance... approved plan must do the following: (1) Submit an engineering type catalog or representative drawings of... specifications by comparing details of the materials' chemical composition, mechanical properties, method...

  7. Design Criteria for Controlling Stress Corrosion Cracking

    NASA Technical Reports Server (NTRS)

    Franklin, D. B.

    1987-01-01

    This document sets forth the criteria to be used in the selection of materials for space vehicles and associated equipment and facilities so that failure resulting from stress corrosion will be prevented. The requirements established herein apply to all metallic components proposed for use in space vehicles and other flight hardware, ground support equipment, and facilities for testing. These requirements are applicable not only to items designed and fabricated by MSFC (Marshall Space Flight Center) and its prime contractors, but also to items supplied to the prime contractor by subcontractors and vendors.

  8. Hepatocellular carcinoma beyond Milan criteria: Management and transplant selection criteria.

    PubMed

    Elshamy, Mohammed; Aucejo, Federico; Menon, K V Narayanan; Eghtesad, Bijan

    2016-07-28

    Liver transplantation (LT) for hepatocellular carcinoma (HCC) has been established as a standard treatment in selected patients for the last two and a half decades. After initially dismal outcomes, the Milan criteria (MC) (single HCC ≤ 5 cm or up to 3 HCCs ≤ 3 cm) have been adopted worldwide to select HCC patients for LT, however cumulative experience has shown that MC can be too strict. This has led to the development of numerous expanded criteria worldwide. Morphometric expansions on MC as well as various criteria which incorporate biomarkers as surrogates of tumor biology have been described. HCC that presents beyond MC initially can be downstaged with locoregional therapy (LRT). Post-LRT monitoring aims to identify candidates with favorable tumor behavior. Similarly, tumor marker levels as response to LRT has been utilized as surrogate of tumor biology. Molecular signatures of HCC have also been correlated to outcomes; these have yet to be incorporated into HCC-LT selection criteria formally. The ongoing discrepancy between organ demand and supply makes patient selection the most challenging element of organ allocation. Further validation of extended HCC-LT criteria models and pre-LT treatment strategies are required. PMID:27478537

  9. Hepatocellular carcinoma beyond Milan criteria: Management and transplant selection criteria

    PubMed Central

    Elshamy, Mohammed; Aucejo, Federico; Menon, K V Narayanan; Eghtesad, Bijan

    2016-01-01

    Liver transplantation (LT) for hepatocellular carcinoma (HCC) has been established as a standard treatment in selected patients for the last two and a half decades. After initially dismal outcomes, the Milan criteria (MC) (single HCC ≤ 5 cm or up to 3 HCCs ≤ 3 cm) have been adopted worldwide to select HCC patients for LT, however cumulative experience has shown that MC can be too strict. This has led to the development of numerous expanded criteria worldwide. Morphometric expansions on MC as well as various criteria which incorporate biomarkers as surrogates of tumor biology have been described. HCC that presents beyond MC initially can be downstaged with locoregional therapy (LRT). Post-LRT monitoring aims to identify candidates with favorable tumor behavior. Similarly, tumor marker levels as response to LRT has been utilized as surrogate of tumor biology. Molecular signatures of HCC have also been correlated to outcomes; these have yet to be incorporated into HCC-LT selection criteria formally. The ongoing discrepancy between organ demand and supply makes patient selection the most challenging element of organ allocation. Further validation of extended HCC-LT criteria models and pre-LT treatment strategies are required. PMID:27478537

  10. A proposed acceptance process for commercial off-the-shelf (COTS) software in reactor applications

    SciTech Connect

    Preckshot, G.G.; Scott, J.A.

    1996-03-01

    This paper proposes a process for acceptance of commercial off-the-shelf (COTS) software products for use in reactor systems important to safety. An initial set of four criteria establishes COTS software product identification and its safety category. Based on safety category, three sets of additional criteria, graded in rigor, are applied to approve/disapprove the product. These criteria fall roughly into three areas: product assurance, verification of safety function and safety impact, and examination of usage experience of the COTS product in circumstances similar to the proposed application. A report addressing the testing of existing software is included as an appendix.

  11. Hazardous waste site remediation and community acceptance: Beyond regulatory compliance

    SciTech Connect

    Howard, M.A.; Moreau, J.P.

    1998-12-31

    Community acceptance is an important criteria in securing regulatory approval of remediation alternatives, and yet the legal requirements for public consultation during the preparation of site investigation and feasibility study reports are minimal. Usually the only provision for formal public input on remedial plans is at the final stages of preparation through the formalistic constraints of a public meeting and limited comment period. This is often too late for meaningful public input and precludes constructive dialogue between responsible parties, local citizens, and regulatory representatives. Often the public opposes proposed remediation alternatives because of insufficient information leading to mistrust and irreconcilable differences. This paper suggests that responsible parties run the risk of community rejection of remediation plans, and costly project delays, if they follow the minimum regulatory requirements for public involvement. Through the use of active and meaningful citizen participation throughout project planning, success in securing community acceptance for preferred remedial alternatives in potentially controversial remediation projects is greatly enhanced.

  12. Acceptance test report for portable exhauster POR-007/Skid E

    SciTech Connect

    Kriskovich, J.R.

    1998-07-24

    This document describes Acceptance Testing performed on Portable Exhauster POR-007/Skid E. It includes measurements of bearing vibration levels, pressure decay testing, programmable logic controller interlocks, high vacuum, flow and pressure control functional testing. The purpose of Acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-0490, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reports (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuum exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document.

  13. Materials for a Stirling engine heater head

    NASA Technical Reports Server (NTRS)

    Noble, J. E.; Lehmann, G. A.; Emigh, S. G.

    1990-01-01

    Work done on the 25-kW advanced Stirling conversion system (ASCS) terrestrial solar program in establishing criteria and selecting materials for the engine heater head and heater tubes is described. Various mechanisms contributing to incompatibility between materials are identified and discussed. Large thermal gradients, coupled with requirements for long life (60,000 h at temperature) and a large number of heatup and cooldown cycles (20,000) drive the design from a structural standpoint. The pressurized cylinder is checked for creep rupture, localized yielding, reverse plasticity, creep and fatigue damage, and creep ratcheting, in addition to the basic requirements for bust and proof pressure. In general, creep rupture and creep and fatigue interaction are the dominant factors in the design. A wide range of materials for the heater head and tubes was evaluated. Factors involved in the assessment were strength and effect on engine efficiency, reliability, and cost. A preliminary selection of Inconel 713LC for the heater head is based on acceptable structural properties but driven mainly by low cost. The criteria for failure, the structural analysis, and the material characteristics with basis for selection are discussed.

  14. The Development of Criteria for Industrial Arts in the Public Secondary Schools and its Application to South Dakota Schools.

    ERIC Educational Resources Information Center

    Burroughs, Marvin George

    A total of 168 South Dakota industrial arts teachers (83 percent) returned questionnaires which were designed to survey public secondary school industrial arts programs and compare them with developed evaluative criteria. The findings were: (1) Industrial arts teachers accepted the philosophy and the objectives as stated in the criteria, (2)…

  15. Quality criteria for water, 1986

    SciTech Connect

    Not Available

    1986-05-01

    Section 304(a) (1) of the Clean Water Act 33 U.S.C. 1314(a) (1) requires the Environmental Protection Agency (EPA) to publish and periodically update ambient water-quality criteria. These criteria are to accurately reflect the latest scientific knowledge (a) on the kind and extent of all identifiable effects on health and welfare including, but not limited to, plankton, fish shellfish, wildlife, plant life, shorelines, beaches, aesthetics, and recreation that may be expected from the presence of pollutants in any body of water including ground water; (b) on the concentration and dispersal of pollutants, or their byproducts, through biological, physical, and chemical processes; and (c) on the effects of pollutants on biological community diversity, productivity, and stability, including information on the factors affecting rates of eutrophication and organic and inorganic sedimentation for varying types of receiving waters. In a continuing effort to provide those who use EPA's water-quality and human-health criteria with up-to-date criteria values and associated information, the document was assembled. The document includes summaries of all the contaminants for which EPA has developed criteria recommendations.

  16. 46 CFR 164.015-5 - Procedure for acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: SPECIFICATIONS AND APPROVAL MATERIALS Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape § 164.015-5 Procedure for acceptance. (a) Unicellular plastic foam is not subject to formal approval, but will be... District will detail a marine inspector to the factory to observe the production facilities...

  17. 46 CFR 164.015-5 - Procedure for acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: SPECIFICATIONS AND APPROVAL MATERIALS Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape § 164.015-5 Procedure for acceptance. (a) Unicellular plastic foam is not subject to formal approval, but will be... District will detail a marine inspector to the factory to observe the production facilities...

  18. 46 CFR 164.015-5 - Procedure for acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL MATERIALS Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape § 164.015-5 Procedure for acceptance. (a) Unicellular plastic foam is not subject to formal approval, but will be... District will detail a marine inspector to the factory to observe the production facilities...

  19. 46 CFR 164.015-5 - Procedure for acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...: SPECIFICATIONS AND APPROVAL MATERIALS Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape § 164.015-5 Procedure for acceptance. (a) Unicellular plastic foam is not subject to formal approval, but will be... unicellular plastic foam prior to being incorporated into finished products, or during the course...

  20. 48 CFR 1446.671 - Inspection, receiving and acceptance certification.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Inspection, receiving and acceptance certification. 1446.671 Section 1446.671 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR CONTRACT MANAGEMENT QUALITY ASSURANCE Material Inspection and Receiving Reports §...