Science.gov

Sample records for acceptance criteria wac

  1. Nevada Test Site Waste Acceptance Criteria

    SciTech Connect

    U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office

    2005-10-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  2. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA, JUNE 2006

    SciTech Connect

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION NEVADA SITE OFFICE

    2006-06-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  3. Waste acceptance criteria for the Waste Isolation Pilot Plant. Revision 4

    SciTech Connect

    Not Available

    1991-12-01

    This Revision 4 of the Waste Acceptance Criteria (WAC), WIPP-DOE-069, identifies and consolidates existing criteria and requirements which regulate the safe handling and preparation of Transuranic (TRU) waste packages for transportation to and emplacement in the Waste Isolation Pilot Plant (WIPP). This consolidation does not invalidate any existing certification of TRU waste to the WIPP Operations and Safety Criteria (Revision 3 of WIPP-DOE--069) and/or Transportation: Waste Package Requirements (TRUPACT-II Safety Analysis Report for Packaging [SARP]). Those documents being consolidated, including Revision 3 of the WAC, currently support the Test Phase.

  4. Methods for verifying compliance with low-level radioactive waste acceptance criteria

    SciTech Connect

    1993-09-01

    This report summarizes the methods that are currently employed and those that can be used to verify compliance with low-level radioactive waste (LLW) disposal facility waste acceptance criteria (WAC). This report presents the applicable regulations representing the Federal, State, and site-specific criteria for accepting LLW. Typical LLW generators are summarized, along with descriptions of their waste streams and final waste forms. General procedures and methods used by the LLW generators to verify compliance with the disposal facility WAC are presented. The report was written to provide an understanding of how a regulator could verify compliance with a LLW disposal facility`s WAC. A comprehensive study of the methodology used to verify waste generator compliance with the disposal facility WAC is presented in this report. The study involved compiling the relevant regulations to define the WAC, reviewing regulatory agency inspection programs, and summarizing waste verification technology and equipment. The results of the study indicate that waste generators conduct verification programs that include packaging, classification, characterization, and stabilization elements. The current LLW disposal facilities perform waste verification steps on incoming shipments. A model inspection and verification program, which includes an emphasis on the generator`s waste application documentation of their waste verification program, is recommended. The disposal facility verification procedures primarily involve the use of portable radiological survey instrumentation. The actual verification of generator compliance to the LLW disposal facility WAC is performed through a combination of incoming shipment checks and generator site audits.

  5. Data Quality Objectives for WTP Feed Acceptance Criteria - 12043

    SciTech Connect

    Arakali, Aruna V.; Benson, Peter A.; Duncan, Garth; Johnston, Jill C.; Lane, Thomas A.; Matis, George; Olson, John W.; Banning, Davey L.; Greer, Daniel A.; Seidel, Cary M.; Thien, Michael G.

    2012-07-01

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is under construction for the U.S. Department of Energy by Bechtel National, Inc. and subcontractor URS Corporation (contract no. DE-AC27-01RV14136). The plant when completed will be the world's largest nuclear waste treatment facility. Bechtel and URS are tasked with designing, constructing, commissioning, and transitioning the plant to the long term operating contractor to process the legacy wastes that are stored in underground tanks (from nuclear weapons production between the 1940's and the 1980's). Approximately 56 million gallons of radioactive waste is currently stored in these tanks at the Hanford Site in southeastern Washington. There are three major WTP facilities being constructed for processing the tank waste feed. The Pretreatment (PT) facility receives feed where it is separated into a low activity waste (LAW) fraction and a high level waste (HLW) fraction. These fractions are transferred to the appropriate (HLW or LAW) facility, combined with glass former material, and sent to high temperature melters for formation of the glass product. In addition to PT, HLW and LAW, other facilities in WTP include the Laboratory (LAB) for analytical services and the Balance of Facilities (BOF) for plant maintenance, support and utility services. The transfer of staged feed from the waste storage tanks and acceptance in WTP receipt vessels require data for waste acceptance criteria (WAC) parameters from analysis of feed samples. The Data Quality Objectives (DQO) development was a joint team effort between WTP and Tank Operations Contractor (TOC) representatives. The focus of this DQO effort was to review WAC parameters and develop data quality requirements, the results of which will determine whether or not the staged feed can be transferred from the TOC to WTP receipt vessels. The approach involved systematic planning for data collection consistent with EPA guidance for the seven-step DQO process

  6. CHARACTERIZATION OF TANK 50 SLURRY FOR SALTSTONE WASTE ACCEPTANCE CRITERIA, APRIL 2007 SAMPLES

    SciTech Connect

    Zeigler, K; Ned Bibler, N; David Diprete, D

    2007-12-07

    This report summarizes the results from the characterization of the second quarter April 2007 sampling of Tank 50H for the Saltstone Waste Acceptance Criteria (WAC). Six one liter samples were taken in polyethylene bottles to analyze for the WAC contaminants and a 200 mL sample was taken in a steel container for analysis of volatile organic compounds. The information from this characterization will be given to Waste Solidification Engineering personnel to qualify the transfer of aqueous waste to the Saltstone Facility. The following conclusions are drawn from the analytical results found in this report: (1) All six of the one liter samples taken in April 2007 from the mixed slurry in Tank 50 have the same compositions within the experimental uncertainty of the analyses. (2) Of the ninety-one process, chemical, and radioactive WAC target or limit contaminants listed in Revision 7 of the 'Waste Acceptance Criteria for Aqueous Waste sent to the Z-Area Saltstone Production Facility', eighty-nine had concentrations that were unequivocally less than the WAC limit or target. (3) The two contaminants whose concentrations could not be shown to be less than their WAC targets were methanol and radioactive Nb-93m. Currently the AD Section of SRNL does not have a method for measuring methanol in caustic solutions. For Nb-93m the results are ambiguous due to possible interferences in the ICP-MS analysis from Zr-93 or Mo-93. (4) Of the six additional chemical and radioactive contaminants requested in the TTR for Saltstone qualification, five were measured or calculated. These were Sb, Be, Tl, along with total beta and gamma. The AD Section does not have a method to measure the 6th contaminant which was the cyanide ion.

  7. Evaluation of ISDP Batch 2 Qualification Compliance to 512-S, DWPF, Tank Farm, and Saltstone Waste Acceptance Criteria

    SciTech Connect

    Shafer, A.

    2010-05-05

    The purpose of this report is to document the acceptability of the second macrobatch (Salt Batch 2) of Tank 49H waste to H Tank Farm, DWPF, and Saltstone for operation of the Interim Salt Disposition Project (ISDP). Tank 49 feed meets the Waste Acceptance Criteria (WAC) requirements specified by References 11, 12, and 13. Salt Batch 2 material is qualified and ready to be processed through ARP/MCU to the final disposal facilities.

  8. Hanford Site liquid waste acceptance criteria

    SciTech Connect

    LUECK, K.J.

    1999-09-11

    This document provides the waste acceptance criteria for liquid waste managed by Waste Management Federal Services of Hanford, Inc. (WMH). These waste acceptance criteria address the various requirements to operate a facility in compliance with applicable environmental, safety, and operational requirements. This document also addresses the sitewide miscellaneous streams program.

  9. LANL Waste acceptance criteria, Chapter 3, radioactive liquid waste treatment facility

    SciTech Connect

    McClenahan, Robert L.

    2006-08-01

    The Radioactive Liquid Waste Treatment Facility (RLWTF) receives and treats aqueous radioactive wastewater generated at Los Alamos National Laboratory (LANL) to meet he discharge criteria specified in a National Pollution Discharge Elimination System (NPDES) permit. The majority of this wastewater is received at the RLWTF through a network of buried pipelines, known as the Radioactive Liquid Waste Collection System (RLWCS). Other wastewater is transported to the RLWTF by truck. The Waste Acceptance Criteria (WAC) outlined in this Chapter are applicable to all radioactive wastewaters which are conveyed to the Technical Area 50(T A-50), RL WTF by the RLWCS or by truck.

  10. Nevada Test Site Waste Acceptance Criteria (NTSWAC)

    SciTech Connect

    NNSA /NSO Waste Management Project

    2008-06-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal.

  11. Hanford Site Solid Waste Acceptance Criteria

    SciTech Connect

    Not Available

    1993-11-17

    This manual defines the Hanford Site radioactive, hazardous, and sanitary solid waste acceptance criteria. Criteria in the manual represent a guide for meeting state and federal regulations; DOE Orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to acceptance of radioactive and hazardous solid waste at the Hanford Site. It is not the intent of this manual to be all inclusive of the regulations; rather, it is intended that the manual provide the waste generator with only the requirements that waste must meet in order to be accepted at Hanford Site TSD facilities.

  12. Acceptance criteria for method equivalency assessments.

    PubMed

    Chatfield, Marion J; Borman, Phil J

    2009-12-15

    Quality by design (ICH-Topic Q8) requires that process control strategy requirements are met and maintained. The challenging task of setting appropriate acceptance criteria for assessment of method equivalence is a critical component of satisfying these requirements. The use of these criteria will support changes made to methods across the product lifecycle. A method equivalence assessment is required when a change is made to a method which may pose a risk to its ability to monitor the quality of the process. Establishing appropriate acceptance criteria are a vital, but not clearly understood, prerequisite to deciding the appropriate design/sample size of the equivalency study. A number of approaches are proposed in the literature for setting acceptance criteria for equivalence which address different purposes. This perspective discusses those purposes and then provides more details on setting acceptance criteria based on patient and producer risk, e.g., tolerance interval approach and the consideration of method or process capability. Applying these to a drug substance assay method for batch release illustrates that, for the equivalence assessment to be meaningful, a clear understanding and appraisal of the control requirements of the method is needed. Rather than a single exact algorithm, the analyst's judgment on a number of aspects is required in deciding the appropriate acceptance criteria.

  13. Hanford Site solid waste acceptance criteria

    SciTech Connect

    Ellefson, M.D.

    1998-07-01

    Order 5820.2A requires that each treatment, storage, and/or disposal facility (referred to in this document as TSD unit) that manages low-level or transuranic waste (including mixed waste and TSCA PCB waste) maintain waste acceptance criteria. These criteria must address the various requirements to operate the TSD unit in compliance with applicable safety and environmental requirements. This document sets forth the baseline criteria for acceptance of radioactive waste at TSD units operated by WMH. The criteria for each TSD unit have been established to ensure that waste accepted can be managed in a manner that is within the operating requirements of the unit, including environmental regulations, DOE Orders, permits, technical safety requirements, waste analysis plans, performance assessments, and other applicable requirements. Acceptance criteria apply to the following TSD units: the Low-Level Burial Grounds (LLBG) including both the nonregulated portions of the LLBG and trenches 31 and 34 of the 218-W-5 Burial Ground for mixed waste disposal; Central Waste Complex (CWC); Waste Receiving and Processing Facility (WRAP); and T Plant Complex. Waste from all generators, both from the Hanford Site and from offsite facilities, must comply with these criteria. Exceptions can be granted as provided in Section 1.6. Specific waste streams could have additional requirements based on the 1901 identified TSD pathway. These requirements are communicated in the Waste Specification Records (WSRds). The Hanford Site manages nonradioactive waste through direct shipments to offsite contractors. The waste acceptance requirements of the offsite TSD facility must be met for these nonradioactive wastes. This document does not address the acceptance requirements of these offsite facilities.

  14. ENVIROCARE OF UTAH: EXPANDING WASTE ACCEPTANCE CRITERIA TO PROVIDE LOW-LEVEL AND MIXED WASTE DISPOSAL OPTIONS

    SciTech Connect

    Rogers, B.; Loveland, K.

    2003-02-27

    Envirocare of Utah operates a low-level radioactive waste disposal facility 80 miles west of Salt Lake City in Clive, Utah. Accepted waste types includes NORM, 11e2 byproduct material, Class A low-level waste, and mixed waste. Since 1988, Envirocare has offered disposal options for environmental restoration waste for both government and commercial remediation projects. Annual waste receipts exceed 12 million cubic feet. The waste acceptance criteria (WAC) for the Envirocare facility have significantly expanded to accommodate the changing needs of restoration projects and waste generators since its inception, including acceptable physical waste forms, radiological acceptance criteria, RCRA requirements and treatment capabilities, PCB acceptance, and liquids acceptance. Additionally, there are many packaging, transportation, and waste management options for waste streams acceptable at Envirocare. Many subcontracting vehicles are also available to waste generators for both government and commercial activities.

  15. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect

    NSTec Environmental Management

    2011-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  16. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect

    NSTec Environmental Management

    2010-09-03

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  17. Acceptance Criteria Framework for Autonomous Biological Detectors

    SciTech Connect

    Dzenitis, J M

    2006-12-12

    The purpose of this study was to examine a set of user acceptance criteria for autonomous biological detection systems for application in high-traffic, public facilities. The test case for the acceptance criteria was the Autonomous Pathogen Detection System (APDS) operating in high-traffic facilities in New York City (NYC). However, the acceptance criteria were designed to be generally applicable to other biological detection systems in other locations. For such detection systems, ''users'' will include local authorities (e.g., facility operators, public health officials, and law enforcement personnel) and national authorities [including personnel from the Department of Homeland Security (DHS), the BioWatch Program, the Centers for Disease Control and Prevention (CDC), and the Federal Bureau of Investigation (FBI)]. The panel members brought expertise from a broad range of backgrounds to complete this picture. The goals of this document are: (1) To serve as informal guidance for users in considering the benefits and costs of these systems. (2) To serve as informal guidance for developers in understanding the needs of users. In follow-up work, this framework will be used to systematically document the APDS for appropriateness and readiness for use in NYC.

  18. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect

    NSTec Environmental Management

    2012-02-28

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept DOE non-radioactive classified waste, DOE non-radioactive hazardous classified waste, DOE low-level radioactive waste (LLW), DOE mixed low-level waste (MLLW), and U.S. Department of Defense (DOD) classified waste for permanent disposal. Classified waste is the only waste accepted for disposal that may be non-radioactive and will be required to meet the waste acceptance criteria for radioactive waste as specified in this document. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project (WMP) at (702) 295-7063, and your call will be directed to the appropriate contact.

  19. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect

    none,

    2013-06-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: • DOE hazardous and non-hazardous non-radioactive classified waste • DOE low-level radioactive waste (LLW) • DOE mixed low-level waste (MLLW) • U.S. Department of Defense (DOD) classified waste The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  20. STOL ride quality criteria - Passenger acceptance.

    NASA Technical Reports Server (NTRS)

    Jacobson, I. D.; Kuhlthau, A. R.

    1972-01-01

    The ability to mathematically model human reaction to variables involved in transportation systems offers a very desirable tool both for the prediction of passenger acceptance of proposed systems, and for establishing acceptance criteria for the system designer. As a first step in the development of a general model for STOL systems, a mathematical formulation is presented which accepts as inputs nine variables felt to be important in flight under STOL-type conditions and presents an index of human response as the output. The variables used are three linear motions, three angular motions, pressure, temperature and noise level. The results are used to establish specifications for stability augmentation systems to improve the ride quality of existing STOL aircraft.

  1. Acceptance criteria for urban dispersion model evaluation

    NASA Astrophysics Data System (ADS)

    Hanna, Steven; Chang, Joseph

    2012-05-01

    The authors suggested acceptance criteria for rural dispersion models' performance measures in this journal in 2004. The current paper suggests modified values of acceptance criteria for urban applications and tests them with tracer data from four urban field experiments. For the arc-maximum concentrations, the fractional bias should have a magnitude <0.67 (i.e., the relative mean bias is less than a factor of 2); the normalized mean-square error should be <6 (i.e., the random scatter is less than about 2.4 times the mean); and the fraction of predictions that are within a factor of two of the observations (FAC2) should be >0.3. For all data paired in space, for which a threshold concentration must always be defined, the normalized absolute difference should be <0.50, when the threshold is three times the instrument's limit of quantification (LOQ). An overall criterion is then applied that the total set of acceptance criteria should be satisfied in at least half of the field experiments. These acceptance criteria are applied to evaluations of the US Department of Defense's Joint Effects Model (JEM) with tracer data from US urban field experiments in Salt Lake City (U2000), Oklahoma City (JU2003), and Manhattan (MSG05 and MID05). JEM includes the SCIPUFF dispersion model with the urban canopy option and the urban dispersion model (UDM) option. In each set of evaluations, three or four likely options are tested for meteorological inputs (e.g., a local building top wind speed, the closest National Weather Service airport observations, or outputs from numerical weather prediction models). It is found that, due to large natural variability in the urban data, there is not a large difference between the performance measures for the two model options and the three or four meteorological input options. The more detailed UDM and the state-of-the-art numerical weather models do provide a slight improvement over the other options. The proposed urban dispersion model acceptance

  2. Natural hazard losses and acceptable risk criteria

    NASA Astrophysics Data System (ADS)

    Khaleghy Rad, M.; Evans, S. G.; Nadim, F.; Lacasse, S.

    2009-12-01

    The criteria for the definition of acceptable risk to the lives of members of a society (commonly called societal risk) resulting from exposure to natural hazards are based in most countries on the frequency and characteristics of industrial accidents, e.g., nuclear power plants. However, historical records indicate that the frequency of natural hazard events is much higher than those involved in industrial hazards and their consequences are far greater. We find that the risk from natural hazards is unacceptable in the current risk criteria framework, i.e., they are an unacceptable risk with respect to the acceptable risk criteria based on the frequency and consequences of industrial accidents. According to a definition of risk, there are two main components; first, the probability of occurrence of the hazard and second, the consequence of the hazard. The occurrence of industrial accident events (hazard) can be controlled to a large extent in contrast to that of natural hazards. However, we can control natural hazard risk, in some cases by engineering solutions to control hazard and by reducing the consequences of the events by mitigating, risk management, warning and monitoring techniques. With reference to natural hazards reducing risk is mainly effected by reducing consequences. The FN-curve is a tool commonly used in societal risk assessment. It is built on a series of frequency-loss data associated with a particular process in a given period of time. It is also used to set acceptable risk criteria for countries or sub-national jurisdictions, by defining slopes and intercepts for plots of a particular (or group of) processes. The intercept of the acceptable risk curve is usually arbitrarily defined in the order of 10-7-10-1 deaths per year, and the slope criteria is based on an adopted aversion factor of the society to accident and disaster losses.The imposed slope criteria is usually between -1 and -2 whereas the slope of FN-curves based on real natural

  3. Development of quantitative risk acceptance criteria

    SciTech Connect

    Griesmeyer, J. M.; Okrent, D.

    1981-01-01

    Some of the major considerations for effective management of risk are discussed, with particular emphasis on risks due to nuclear power plant operations. Although there are impacts associated with the rest of the fuel cycle, they are not addressed here. Several previously published proposals for quantitative risk criteria are reviewed. They range from a simple acceptance criterion on individual risk of death to a quantitative risk management framework. The final section discussed some of the problems in the establishment of a framework for the quantitative management of risk.

  4. Steam generator tube integrity flaw acceptance criteria

    SciTech Connect

    Cochet, B.

    1997-02-01

    The author discusses the establishment of a flaw acceptance criteria with respect to flaws in steam generator tubing. The problem is complicated because different countries take different approaches to the problem. The objectives in general are grouped in three broad areas: to avoid the unscheduled shutdown of the reactor during normal operation; to avoid tube bursts; to avoid excessive leak rates in the event of an accidental overpressure event. For each degradation mechanism in the tubes it is necessary to know answers to an array of questions, including: how well does NDT testing perform against this problem; how rapidly does such degradation develop; how well is this degradation mechanism understood. Based on the above information it is then possible to come up with a policy to look at flaw acceptance. Part of this criteria is a schedule for the frequency of in-service inspection and also a policy for when to plug flawed tubes. The author goes into a broad discussion of each of these points in his paper.

  5. Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

    SciTech Connect

    Mertz, G.

    1999-12-16

    This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements.

  6. Nevada Test Site Waste Acceptance Criteria, December 2000

    SciTech Connect

    2000-12-01

    This document establishes the US Department of Energy, Nevada Operations Office waste acceptance criteria. The waste acceptance criteria provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive waste and mixed waste for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Sites for storage or disposal.

  7. Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant

    SciTech Connect

    Washington TRU Solutions LLC

    2005-12-29

    The purpose of this document is to summarize the waste acceptance criteria applicable to the transportation, storage, and disposal of contact-handled transuranic (CH-TRU) waste at the Waste Isolation Pilot Plant (WIPP). These criteria serve as the U.S. Department of Energy's (DOE) primary directive for ensuring that CH-TRU waste is managed and disposed of in a manner that protects human health and safety and the environment.The authorization basis of WIPP for the disposal of CH-TRU waste includes the U.S.Department of Energy National Security and Military Applications of Nuclear EnergyAuthorization Act of 1980 (reference 1) and the WIPP Land Withdrawal Act (LWA;reference 2). Included in this document are the requirements and associated criteriaimposed by these acts and the Resource Conservation and Recovery Act (RCRA,reference 3), as amended, on the CH-TRU waste destined for disposal at WIPP.|The DOE TRU waste sites must certify CH-TRU waste payload containers to thecontact-handled waste acceptance criteria (CH-WAC) identified in this document. Asshown in figure 1.0, the flow-down of applicable requirements to the CH-WAC istraceable to several higher-tier documents, including the WIPP operational safetyrequirements derived from the WIPP CH Documented Safety Analysis (CH-DSA;reference 4), the transportation requirements for CH-TRU wastes derived from theTransuranic Package Transporter-Model II (TRUPACT-II) and HalfPACT Certificates ofCompliance (references 5 and 5a), the WIPP LWA (reference 2), the WIPP HazardousWaste Facility Permit (reference 6), and the U.S. Environmental Protection Agency(EPA) Compliance Certification Decision and approval for PCB disposal (references 7,34, 35, 36, and 37). The solid arrows shown in figure 1.0 represent the flow-down of allapplicable payload container-based requirements. The two dotted arrows shown infigure 1.0 represent the flow-down of summary level requirements only; i.e., the sitesmust reference the regulatory source

  8. Acceptance Criteria for Aerospace Structural Adhesives.

    DTIC Science & Technology

    ADHESIVES, *AIRFRAMES, PRIMERS, STRUCTURAL ENGINEERING, CHEMICAL COMPOSITION, MECHANICAL PROPERTIES, INDUSTRIAL PRODUCTION , DATA ACQUISITION , PARTICLE SIZE, ACCEPTANCE TESTS, ELASTOMERS, BONDING, QUALITY CONTROL, .

  9. Editorial: acceptance criteria and editorial procedures for Optics Letters.

    PubMed

    Zhang, Xi-Cheng; Andersen, Peter E; Justus, Brian L; Galtarossa, Andrea

    2014-09-01

    Optics Letters Editors strive to provide timely reviews and decisions for authors while bringing top quality papers to the optics community. The purpose of this editorial is to explain Optics Letters' acceptance criteria and editorial procedures. Our hope is that greater transparency concerning the decision-making process will increase understanding as well as acceptance of our criteria and procedures.

  10. Nevada Test Site Waste Acceptance Criteria

    SciTech Connect

    U.S. Department of Energy, Nevada Operations Office, Waste Acceptance Criteria

    1999-05-01

    This document provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the Nevada Test Site.

  11. Acceptance criteria considerations for miscellaneous wastes

    SciTech Connect

    Irvine, A.R.; Forsberg, C.W.

    1987-01-01

    EPA standards set forth limitations regarding releases to the accessible environment adjacent to a geologic repository. The NRC criteria pertaining to waste form and engineered barrier performance place certain restrictions on the physical and chemical nature of the waste form and require substantially complete confinement of radioactivity until the high-heat-production period is past. After this period, the annual release of radionuclides from the waste package is normally limited to 1 part in 100,000 of the amounts calculated to be present at 1000-y decay. The regulation permits deviation from these criteria in exceptional circumstances. One such circumstance might be the absence of a significant perturbation in temperature around the stored waste. The lack of significant heat release will eliminate the hydrologic driving force for dispersal of radionuclides. Exceptional circumstances which potentially could justify a less stringent long-term release criterion are: small quantity of radioactivity, the nature of the radioactive species, and the nature of the geology in which the waste is to be emplaced. Because the MW after a suitable decay period have low heat release rates per unit volume, they apparently could be so emplaced in a repository that there would be no compelling need, according to the reasoning presented in 10 CFR 60, for a 1000-y container. Regarding attainment of the specified long-term release rate criterion, neither the solubility limits for the various waste forms nor the conductance of potential migration barriers are currently adequately characterized. The relatively small total heat generation rate for the MW in combination with the usual low volumetric heat generation rate apparently will allow application of migration barriers in a low temperature environment where barrier performance would be expected to be unchanged with time.

  12. Implementation of acceptability criteria for dental radiology in Belgium.

    PubMed

    Clarijs, Tom

    2013-02-01

    The implementation of routine quality control (QC) tests in dental radiology in Belgium has been neglected for many years. In 2008, the (Belgian) Federal Agency for Nuclear Control determined acceptability criteria for X-ray equipment used for dentomaxillofacial imaging. An overview of the development of the criteria, together with implementation and the first results of dental QC in Belgium, is discussed.

  13. Heat exchanger, head and shell acceptance criteria

    SciTech Connect

    Lam, P.S.; Sindelar, R.L.

    1992-09-01

    Instability of postulated flaws in the head component of the heat exchanger could not produce a large break, equivalent to a DEGB in the PWS piping, due to the configuration of the head and restraint provided by the staybolts. Rather, leakage from throughwall flaws in the head would increase with flaw length with finite leakage areas that are bounded by a post-instability flaw configuration. Postulated flaws at instability in the shell of the heat exchanger or in the cooling water nozzles could produce a large break in the Cooling Water System (CWS) pressure boundary. An initial analysis of flaw stability for postulated flaws in the heat exchanger head was performed in January 1992. This present report updates that analysis and, additionally, provides acceptable flaw configurations to maintain defined structural or safety margins against flaw instability of the external pressure boundary components of the heat exchanger, namely the head, shell, and cooling water nozzles. Structural and flaw stability analyses of the heat exchanger tubes, the internal pressure boundary of the heat exchangers or interface boundary between the PWS and CWS, were previously completed in February 1992 as part of the heat exchanger restart evaluation and are not covered in this report.

  14. RESULTS FOR THE FOURTH QUARTER 2010 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Reigel, M

    2011-02-22

    This report details the chemical and radionuclide contaminant results for the characterization of the 2010 Fourth Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Liquid Waste Operations (LWO) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: (1) The concentrations of the reported chemical and radioactive contaminants were less than their respective WAC targets or limits unless noted in this section. (2) The reported detection limits for {sup 94}Nb, {sup 247}Cm and {sup 249}Cf are above the requested limits from Reference 2. However, they are below the limits established in Reference 3. (3) There is an estimated concentration of trimethylbenzene (2.25 mg/L). This is not a WAC analyte, but it is the first time this organic compound has been detected in a quarterly WAC sample from Tank 50. (4) The reported detection limit for Norpar 13 is greater than the limit from Table 4 and Attachment 8.2 of the WAC. (5) The reported detection limit for Isopar L is greater than the limit from Table 3 of the WAC. (6) Isopar L and Norpar 13 have limited solubility in aqueous solutions making it difficult to obtain consistent and reliable sub-samples. The values reported in this memo are the concentrations in the sub-sample as detected by the GC/MS; however, the results may not accurately represent the concentrations of the analytes in Tank 50.

  15. Idaho CERCLA Disposal Facility Complex Waste Acceptance Criteria

    SciTech Connect

    W. Mahlon Heileson

    2006-10-01

    The Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) has been designed to accept CERCLA waste generated within the Idaho National Laboratory. Hazardous, mixed, low-level, and Toxic Substance Control Act waste will be accepted for disposal at the ICDF. The purpose of this document is to provide criteria for the quantities of radioactive and/or hazardous constituents allowable in waste streams designated for disposal at ICDF. This ICDF Complex Waste Acceptance Criteria is divided into four section: (1) ICDF Complex; (2) Landfill; (3) Evaporation Pond: and (4) Staging, Storage, Sizing, and Treatment Facility (SSSTF). The ICDF Complex section contains the compliance details, which are the same for all areas of the ICDF. Corresponding sections contain details specific to the landfill, evaporation pond, and the SSSTF. This document specifies chemical and radiological constituent acceptance criteria for waste that will be disposed of at ICDF. Compliance with the requirements of this document ensures protection of human health and the environment, including the Snake River Plain Aquifer. Waste placed in the ICDF landfill and evaporation pond must not cause groundwater in the Snake River Plain Aquifer to exceed maximum contaminant levels, a hazard index of 1, or 10-4 cumulative risk levels. The defined waste acceptance criteria concentrations are compared to the design inventory concentrations. The purpose of this comparison is to show that there is an acceptable uncertainty margin based on the actual constituent concentrations anticipated for disposal at the ICDF. Implementation of this Waste Acceptance Criteria document will ensure compliance with the Final Report of Decision for the Idaho Nuclear Technology and Engineering Center, Operable Unit 3-13. For waste to be received, it must meet the waste acceptance criteria for the specific disposal/treatment unit (on-Site or off-Site) for which it is destined.

  16. Results For The First Quarter 2012 Tank 50 WAC Slurry Sample: Chemical And Radionuclide Contaminant Results

    SciTech Connect

    Bannochie, C. J.

    2012-07-16

    This report details the chemical and radionuclide contaminant results for the characterization of the 2012 First Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Waste Solidification Engineering (WSE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this memorandum: The concentrations of the reported chemical and radioactive contaminants were less than their respective WAC targets or limits unless noted; The reported detection limit for {sup 94}Nb is above the requested limit but below the estimated limit; {sup 247}Cm and {sup 249}Cf are above the requested limits. However, they are below the limits established; The reported detection limit for Norpar 13 is greater than the limit from the WAC; The reported detection limit for Isopar L is greater than the limit from WAC; Isopar L and Norpar 13 have limited solubility in aqueous solutions making it difficult to obtain consistent and reliable sub-samples; The values reported in this report are the concentrations in the sub-sample as detected by the instrument, however, the results may not accurately represent the concentrations of the analytes in Tank 50; The low insoluble solids content increases the measurement uncertainty for insoluble species.

  17. RESULTS FOR THE THIRD QUARTER 2011 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Reigel, M.

    2011-10-20

    The Saltstone Facility is designed and permitted to immobilize and dispose of low-level radioactive and hazardous liquid waste (salt solution) remaining from the processing of radioactive material at the Savannah River Site. Low-level waste (LLW) streams from the Effluent Treatment Project (ETP), H-Canyon, and the decontaminated salt solution product from the Actinide Removal Process/Modular Caustic Side Solvent Extraction (CSSX) Unit (ARP/MCU) process are stored in Tank 50 until the LLW can be transferred to the Saltstone Facility for treatment and disposal. The LLW must meet the specified waste acceptance criteria (WAC) before it is processed into saltstone. The specific chemical and radionuclide contaminants and their respective WAC limits are in the current Saltstone WAC. Waste Solidification Engineering (WSE) requested that Savannah River National Laboratory (SRNL) perform quarterly analysis on saltstone samples. The concentrations of chemical and radionuclide contaminants are measured to ensure the saltstone produced during each quarter is in compliance with the current WAC. This report documents the concentrations of chemical and radionuclide contaminants for the 2011 Third Quarter samples collected from Tank 50 on July 7, 2011 and discusses those results in further detail than the previously issued results report.

  18. RESULTS FOR THE FOURTH QUARTER 2011 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Bannochie, C.

    2012-01-31

    The Saltstone Facility is designed and permitted to immobilize and dispose of low-level radioactive and hazardous liquid waste (salt solution) remaining from the processing of radioactive material at the Savannah River Site. Low-level waste (LLW) streams from the Effluent Treatment Project (ETP), H-Canyon, and the decontaminated salt solution product from the Actinide Removal Process/Modular Caustic Side Solvent Extraction (CSSX) Unit (ARP/MCU) process are stored in Tank 50 until the LLW can be transferred to the Saltstone Facility for treatment and disposal. The LLW must meet the specified waste acceptance criteria (WAC) before it is processed into saltstone. The specific chemical and radionuclide contaminants and their respective WAC limits are in the current Saltstone WAC. Waste Solidification Engineering (WSE) requested that Savannah River National Laboratory (SRNL) perform quarterly analysis on saltstone samples. The concentrations of chemical and radionuclide contaminants are measured to ensure the saltstone produced during each quarter is in compliance with the current WAC. This report documents the concentrations of chemical and radionuclide contaminants for the 2011 Fourth Quarter samples collected from Tank 50 on October 12, 2011 and discusses those results in further detail than the previously issued results report.

  19. RESULTS FOR THE SECOND QUARTER 2011 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Eibling, R.

    2011-08-25

    The Saltstone Facility is designed and permitted to immobilize and dispose of low-level radioactive and hazardous liquid waste (salt solution) remaining from the processing of radioactive material at the Savannah River Site. Low-level waste (LLW) streams from the Effluent Treatment Project (ETP), H-Canyon, the DDA (Deliquification, Dissolution, and Adjustment) process, and the decontaminated salt solution product from the Actinide Removal Process/Modular Caustic Side Solvent Extraction (CSSX) Unit (ARP/MCU) process are stored in Tank 50 until the LLW can be transferred to the Saltstone Facility for treatment and disposal. The LLW must meet the specified waste acceptance criteria (WAC) before it is processed into saltstone. The specific chemical and radionuclide contaminants and their respective WAC limits are listed in the current Saltstone WAC. Waste Solidification Engineering (WSE) requested that Savannah River National Laboratory (SRNL) perform quarterly analysis on saltstone samples. The concentrations of chemical and radionuclide contaminants are measured to ensure the saltstone produced during each quarter is in compliance with the current WAC. This report documents the concentrations of chemical and radionuclide contaminants for the 2011 Second Quarter samples collected from Tank 50 on April 4, 2011 and discusses those results in further detail than the previously issued results report. The following conclusions are drawn from the analytical results provided in this report: (1) The concentrations of the reported chemical and radioactive contaminants were less than their respective WAC targets or limits unless noted in this section. (2) The reported detection limit for {sup 59}Ni is above the requested limit from Reference 2 but below the established limit in Reference 3. (3) The reported detection limit for {sup 94}Nb is above the requested limit from Reference 2; however, it is below the established limits in Reference 3. (4) The reported concentration of

  20. RESULTS FOR THE THIRD QUARTER 2007 TANK 50H WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Zeigler, K; Ned Bibler, N

    2008-07-11

    The Saltstone Facility is designed and permitted to immobilize and dispose of low-level radioactive and hazardous liquid waste (salt solution) remaining from the processing of radioactive material at the Savannah River Site. Low activity wastewater streams from the Effluent Treatment Project (ETP), H-Canyon, and the high level waste (HLW) storage tanks, are stored as a mixture in Tank 50H until it can be pumped to the Saltstone Facility for treatment and disposal. Specific waste acceptance criteria (WAC) must be met for the transfer of low-level aqueous waste from Tank 50H to the Saltstone Facility. Low level waste which meets the WAC can be transferred, stored and treated in the Saltstone Production Facility (SPF) for subsequent disposal as saltstone in the Saltstone Disposal Facility (SDF). Waste Solidification Engineering (WSE) has requested through a Technical Task Request (TTR) that the Savannah River National Laboratory (SRNL) measure the concentrations of chemical and radionuclide contaminants listed in the currently approved Saltstone Waste Acceptance Criteria (WAC). A Task Technical and Quality Assurance Plan and Analytical Study Plan has been written for this request. WAC determinations are needed on a quarterly basis for chemical contaminants and every first and third quarter for radioactive contaminants. This memorandum presents the results for the chemical and radionuclide contaminants in the third quarter, from the samples taken from Tank 50 in September, 2007.

  1. RESULTS FOR THE THIRD QUARTER 2010 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Reigel, M.; Bibler, N.

    2010-12-09

    This report details the chemical and radionuclide contaminant results for the characterization of the 2010 Third Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Liquid Waste Operations (LWO) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: (i) The concentrations of the reported chemical and radioactive contaminants were less than their respective WAC targets or limits unless noted in this section. (ii) The reported detection limits for {sup 94}Nb, {sup 247}Cm and {sup 249}Cf are above the requested limits from Reference 4. However, they are below the limits established in Reference 3. (iii) The reported detection limit for {sup 242m}Am is greater than the requested limit from Attachment 8.4 of the WAC. (iv) The reported detection limit for Isopar L is greater than the limit from Table 3 of the WAC. (v) The reported concentration of Isopropanol is greater than the limit from Table 4 of the WAC. (vi) Isopar L and Norpar 13 have limited solubility in aqueous solutions making it difficult to obtain consistent and reliable sub-samples. The values reported in this memo are the concentrations in the sub-sample as detected by the GC/MS; however, the results may not accurately represent the concentrations of the analytes in Tank 50.

  2. RESULTS FOR THE SECOND QUARTER 2010 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Reigel, M.; Bibler, N.

    2010-08-04

    This report details the chemical and radionuclide contaminant results for the characterization of the 2010 Second Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC).1 Information from this characterization will be used by Liquid Waste Operations (LWO) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: (1) The concentrations of the reported chemical and radioactive contaminants were less than their respective WAC targets or limits unless noted in this section. (2) The reported detection limits for {sup 94}Nb and {sup 144}Ce are above both the established and requested limits from References 4 and 6. (3) The reported detection limits for {sup 247}Cm and {sup 249}Cf are above the requested limits from Reference 4. However, they are below the limits established in Reference 6. (4) The reported detection limit for Isopar L is greater than the limit from Table 3 of the WAC. (5) A measurable concentration of Norpar 13 is present in the sample. The reported concentration is greater than the requested limit from Table 4 and Attachment 8.2 of the WAC. (6) Isopar L and Norpar 13 have limited solubility in aqueous solutions making it difficult to obtain consistent and reliable sub-samples. The values reported in this memo are the concentrations in the sub-sample as detected by the GC/MS; however, the results may not accurately represent the concentrations of the analytes in Tank 50. (7) The detection limit for isopropanol has been lowered from 0.5 mg/L to 0.25 mg/L{sup 7}. This revised limit now satisfies the limit in Table 4 of the WAC.

  3. Vintage WAC: Improving the Learning Impact of WAC

    ERIC Educational Resources Information Center

    Thew, Neill; Gustafsson, Magnus

    2007-01-01

    This article is a report on the 2006 WAC Conference at Clemson University, written from the perspective of two international "critical friends." We use our reflections on the conference as a springboard for exploring the current state of play of the WAC movement, and for suggesting future areas for development. We noted three common sets…

  4. MCO combustible gas management leak test acceptance criteria

    SciTech Connect

    SHERRELL, D.L.

    1999-05-11

    Existing leak test acceptance criteria for mechanically sealed and weld sealed multi-canister overpacks (MCO) were evaluated to ensure that MCOs can be handled and stored in stagnant air without compromising the Spent Nuclear Fuel Project's overall strategy to prevent accumulation of combustible gas mixtures within MCO's or within their surroundings. The document concludes that the integrated leak test acceptance criteria for mechanically sealed and weld sealed MCOs (1 x 10{sup -5} std cc/sec and 1 x 10{sup -7} std cc/sec, respectively) are adequate to meet all current and foreseeable needs of the project, including capability to demonstrate compliance with the NFPA 60 Paragraph 3-3 requirement to maintain hydrogen concentrations [within the air atmosphere CSB tubes] t or below 1 vol% (i.e., at or below 25% of the LFL).

  5. Establishing seismic design criteria to achieve an acceptable seismic margin

    SciTech Connect

    Kennedy, R.P.

    1997-01-01

    In order to develop a risk based seismic design criteria the following four issues must be addressed: (1) What target annual probability of seismic induced unacceptable performance is acceptable? (2). What minimum seismic margin is acceptable? (3) Given the decisions made under Issues 1 and 2, at what annual frequency of exceedance should the Safe Shutdown Earthquake ground motion be defined? (4) What seismic design criteria should be established to reasonably achieve the seismic margin defined under Issue 2? The first issue is purely a policy decision and is not addressed in this paper. Each of the other three issues are addressed. Issues 2 and 3 are integrally tied together so that a very large number of possible combinations of responses to these two issues can be used to achieve the target goal defined under Issue 1. Section 2 lays out a combined approach to these two issues and presents three potentially attractive combined resolutions of these two issues which reasonably achieves the target goal. The remainder of the paper discusses an approach which can be used to develop seismic design criteria aimed at achieving the desired seismic margin defined in resolution of Issue 2. Suggestions for revising existing seismic design criteria to more consistently achieve the desired seismic margin are presented.

  6. RESULTS FOR THE FIRST QUARTER 2009 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Reigel, M.; Diprete, C.; Bibler, N.

    2009-10-06

    This report details the chemical and radionuclide contaminant results for the characterization of the 2009 First Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Liquid Waste Operations (LWO) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: (1) The concentrations of the chemical and radioactive contaminants were all less than their respective WAC Targets or Limits except for Am-242m. (2) The radionuclide Am-242m was not detected; however, its detection limit is above the WAC Target given in Attachment 8.4. The higher detection limit was expected based on current analytical capabilities as stated in the Task Technical and Quality Assurance Plan (TTQAP). (3) The reported detection limit of isopropanol was lower than its WAC Limit for accident analysis but higher than its WAC concentration given in Table 4 for vault flammability. The higher detection limit was expected based on current analytical capabilities and is documented in the Task Technical and Quality Assurance Plan (TTQAP). (4) The reported detection limit for Isopar L is lower than its WAC limit for accident analysis in Appendix 8.1 but higher than its WAC concentration given in Table 3 in reference to vault flammability. The higher detection limit was expected based on current analytical capabilities as stated in the Task Technical and Quality Assurance Plan (TTQAP). (5) Isopar L and Norpar 13 have limited solubility in aqueous solutions making it difficult to obtain consistent and reliable sub-samples. The values reported in this memo are the concentrations in the sub-sample as detected by the GC/MS; however, the results may not accurately

  7. Automated Transportation Management System (ATMS) V2.0 logistics module PBI acceptance criteria

    SciTech Connect

    Weidert, R.S.

    1995-02-28

    This document defines the acceptance criteria for the Automated Transportation Management System V2.0 Logistics Module Performance Based Incentive (PBI). This acceptance criteria will be the primary basis for the generation of acceptance test procedures. The purpose of this document is to define the minimum criteria that must be fulfilled to guarantee acceptance of the Logistics Module.

  8. Establishment of noise acceptance criteria for wind turbines

    NASA Technical Reports Server (NTRS)

    Stephens, D. G.; Shepherd, K. P.; Grosveld, F.

    1981-01-01

    A program is being conducted to develop noise criteria for wind turbines which minimize annoyance and which can be used in design specifications for future machines. The approach consists of presenting wind turbine noise stimuli to test subjects in a laboratory listening chamber. The responses of the subjects are recorded for a range of stimuli which encompass the designs, operating conditions, and ambient noise levels of current and future installations. Results to date have established the threshold of detectability for a range of impulsive stimuli of the type associated with blade/tower-wake interactions. The status of the ongoing psychoacoustic tests, the subjective data, and the approach to the development of noise acceptance criteria are described.

  9. Results For The Second Quarter 2013 Tank 50 WAC Slurry Sample: Chemical And Radionuclide Contaminants

    SciTech Connect

    Bannochie, Christopher J.

    2013-07-31

    This report details the chemical and radionuclide contaminant results for the characterization of the 2013 Second Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC) in effect at that time. Information from this characterization will be used by Saltstone Facility Engineering (SFE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System.

  10. Results For The Third Quarter 2013 Tank 50 WAC Slurry Sample

    SciTech Connect

    Bannochie, Christopher J.

    2013-11-26

    This report details the chemical and radionuclide contaminant results for the characterization of the 2013 Third Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC) in effect at that time. Information from this characterization will be used by DWPF & Saltstone Facility Engineering (DSFE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System.

  11. Results For The Fourth Quarter 2014 Tank 50 WAC Slurry Sample: Chemical And Radionuclide Contaminants

    SciTech Connect

    Crawford, C.

    2015-09-30

    This report details the chemical and radionuclide contaminant results for the characterization of the Calendar Year (CY) 2014 Fourth Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC) in effect at that time. Information from this characterization will be used by DWPF & Saltstone Facility Engineering (DSFE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System.

  12. Results for the Third Quarter 2012 Tank 50 WAC Slurry Sample: Chemical and Radionuclide Contaminants

    SciTech Connect

    Bannochie, C. J.

    2012-10-26

    This report details the chemical and radionuclide contaminant results for the characterization of the 2012 Third Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Waste Solidification Engineering (WSE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System.

  13. Results for the second quarter 2014 tank 50 WAC slurry sample chemical and radionuclide contaminants

    SciTech Connect

    Bannochie, C.

    2014-09-04

    This report details the chemical and radionuclide contaminant results for the characterization of the 2014 Second Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC) in effect at that time. Information from this characterization will be used by DWPF & Saltstone Facility Engineering (DSFE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System.

  14. Results for the Third Quarter 2014 Tank 50 WAC slurry sample: Chemical and radionuclide contaminants

    SciTech Connect

    Crawford, Charles L.

    2015-01-08

    This report details the chemical and radionuclide contaminant results for the characterization of the 2014 Third Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC) in effect at that time.1 Information from this characterization will be used by DWPF & Saltstone Facility Engineering (DSFE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System.

  15. Community acceptance of helicopter noise: Criteria and application

    NASA Technical Reports Server (NTRS)

    Munch, C. L.; King, R. J.

    1974-01-01

    A study was conducted to define those criteria necessary for civil helicopter operations to be acoustically acceptable to the communities from which they operate and over which they fly. The study involved surveying existing domestic and foreign Federal regulations and guidelines, state and local noise ordinances, results of community noise annoyance studies, and results of individual aircraft noise annoyance studies, and results of individual aircraft noise annoyance studies in order to establish the criteria. The final criteria selection are based on the Day-Night Level, L sub DN, a measure of total noise exposure. The basic rating unit is the A weighted sound pressure level (dbA) which has accuracy comparable to other units currently used for aircraft. An L sub DN of 60 is recommended as a criterion for areas where the ambient noise is below 58 dbA. An L sub DN value 2 dbA above the local ambient is recommended for areas where the ambient is above 58 dbA.

  16. 78 FR 53483 - Inspections, Tests, Analyses, and Acceptance Criteria; Vogtle Electric Generating Plant, Unit 3

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-29

    ... COMMISSION Inspections, Tests, Analyses, and Acceptance Criteria; Vogtle Electric Generating Plant, Unit 3 AGENCY: Nuclear Regulatory Commission. ACTION: Determination of inspections, tests, analyses, and..., tests, and analyses have been successfully completed, and that the specified acceptance criteria are...

  17. 78 FR 53484 - Inspections, Tests, Analyses, and Acceptance Criteria; Vogtle Electric Generating Plant, Unit 4

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-29

    ... COMMISSION Inspections, Tests, Analyses, and Acceptance Criteria; Vogtle Electric Generating Plant, Unit 4 AGENCY: Nuclear Regulatory Commission. ACTION: Determination of inspections, tests, analyses, and..., tests, and analyses have been successfully completed, and that the specified acceptance criteria are...

  18. Results For The First Quarter 2013 Tank 50 WAC Slurry Sample: Chemical And Radionuclide Contaminants

    SciTech Connect

    Bannochie, C. J.

    2013-05-14

    This report details the chemical and radionuclide contaminant results for the characterization of the 2013 First Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Waste Solidification Engineering (WSE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: SRR WAC targets or limits were met for all analyzed chemical and radioactive contaminates unless noted in this section; {sup 59}Ni, {sup 94}Nb, {sup 247}Cm, {sup 249}Cf, and {sup 251}Cf are above the requested SRR target concentrations. However, they are below the detection limits established by SRNL; Norpar 13 and Isopar L have higher detection limits compared with the Saltstone WAC. The data provided in this report is based upon the concentrations in the sub-sample, and due to the limited solubility in aqueous solution, may not represent the concentrations of the analytes in Tank 50; and, The low insoluble solids content increases the measurement uncertainty for insoluble species.

  19. Results for the Third Quarter 2013 Tank 50 WAC Slurry Sample: Chemical and Radionuclide Contaminants

    SciTech Connect

    Bannochie, Christopher J.

    2014-09-30

    This report details the chemical and radionuclide contaminant results for the characterization of the 2013 Third Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC) in effect at that time.1 Information from this characterization will be used by DWPF & Saltstone Facility Engineering (DSFE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: SRR WAC targets or limits were met for all analyzed chemical and radioactive contaminates unless noted in this section. 59Ni, 94Nb, 247Cm, 249Cf, and 251Cf are above the requested SRR target concentrations.2 However, they are below the detection limits established by SRNL.3 Norpar 13 and Isopar L have higher detection limits4 compared with the Saltstone WAC.1 The data provided in this report is based upon the concentrations in the sub-sample, and due to the limited solubility in aqueous solution, may not represent the concentrations of the analytes in Tank 50. Finally, the low insoluble solids content increases the measurement uncertainty for insoluble species.

  20. Results for the Fourth Quarter 2012 Tank 50 WAC Slurry Sample: Chemical and Radionuclide Contaminants

    SciTech Connect

    Bannochie, Christopher J.

    2014-09-30

    This report details the chemical and radionuclide contaminant results for the characterization of the 2012 Fourth Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC).1 Information from this characterization will be used by Waste Solidification Engineering (WSE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: The concentration of the reported chemical and radioactive contaminants were less than their respective WAC Limits and Targets, unless noted in this section. Norpar 13 and Isopar L have higher detection limits5 compared with the Saltstone WAC1. The data provided in this report is based upon the concentrations in the sub-sample, and due to the limited solubility in aqueous solution, may not represent the concentrations of the analytes in Tank 50. Diisooctyl adipate (or diisooctyl hexanedioate) was measured at 1.30E+00 mg/L in one of two replicate measurements conducted on an at-depth sample.a The organic analysis of the at-depth sample was conducted at the request of SRR.4 This analyte was below the detection limit in the surface sample. The low insoluble solids content increases the measurement uncertainty for insoluble species.

  1. RESULTS FOR THE FOURTH QUARTER TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Reigel, M.; Bibler, N.

    2010-01-27

    The Saltstone Facility is designed and permitted to immobilize and dispose of low-level radioactive and hazardous liquid waste (salt solution) remaining from the processing of radioactive material at the Savannah River Site. Low-level waste (LLW) streams from the Effluent Treatment Project (ETP), H-Canyon, the DDA (Deliquification, Dissolution, and Adjustment) process, and the decontaminated salt solution product from the Actinide Removal Process/Modular Caustic Side Solvent Extraction (CSSX) Unit (ARP/MCU) process are stored in Tank 50 until the LLW can be transferred to the Saltstone Facility for treatment and disposal. The LLW must meet the specified waste acceptance criteria (WAC) before it is processed into saltstone. The specific chemical and radionuclide contaminants and their respective WAC limits are listed in the current Saltstone WAC. SRS Liquid Waste Operations (LWO) requested that Savannah River National Laboratory (SRNL) perform quarterly analysis on saltstone samples. The concentrations of chemical and radionuclide contaminants are measured to ensure the saltstone produced during each quarter is in compliance with the current WAC. This report documents the concentrations of chemical and radionuclide contaminants for the 2009 Fourth Quarter samples collected from Tank 50 on October 2, 2009 and discusses those results in further detail than the previously issued results report. This report details the chemical and radionuclide contaminant results for the characterization of the 2009 Fourth Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Liquid Waste Operations (LWO) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results

  2. RESULTS FOR THE FIRST QUARTER 2012 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Bannochie, C.

    2012-06-06

    This report details the chemical and radionuclide contaminant results for the characterization of the 2012 First Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Waste Solidification Engineering (WSE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this memorandum: (1) The concentrations of the reported chemical and radioactive contaminants were less than their respective WAC targets or limits unless noted in this section; (2) The reported detection limit for {sup 94}Nb is above the requested limit from Reference 2 but below the estimated limit in Reference 3; (3) {sup 247}Cm and {sup 249}Cf are above the requested limits from Reference 2. however, they are below the limits established in Reference 3; (4) The reported detection limit for Norpar 13 is greater than the limit from Table 4 and Attachment 8.2 of the WAC; (5) The reported detection limit for Isopar L is greater than the limit from Table 3 of the WAC; (6) Isopar L and Norpar 13 have limited solubility in aqueous solutions making it difficult to obtain consistent and reliable sub-samples, the values reported in this report are the concentrations in the sub-sample as detected by the instrument; however, the results may not accurately represent the concentrations of the analytes in Tank 50; and (7) The low insoluble solids content increases the measurement uncertainty for insoluble species.

  3. RESULTS FOR THE FIRST QUARTER 2010 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Reigel, M.; Bibler, N.

    2010-05-05

    This report details the chemical and radionuclide contaminant results for the characterization of the 2010 First Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Liquid Waste Operations (LWO) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: (1) The concentrations of the reported chemical and radioactive contaminants were less than their respective WAC targets or limits unless noted in this section. (2) The reported detection limit for Isopar L is greater than the limit from Table 3 of the WAC. (3) The reported detection limits for {sup 59}Ni and {sup 94}Nb are above the requested limits from Reference 4. However, they are each below the limits established in Reference 6. (4) The reported detection limit for isopropanol is greater than the requested limit from Table 4 of the WAC. (5) The reported detection limits for 247Cm and 249Cf are above the requested limits from Reference 4. However, they are below the limits established in Reference 6. (6) Isopar L and Norpar 13 have limited solubility in aqueous solutions making it difficult to obtain consistent and reliable sub-samples. The values reported in this memo are the concentrations in the sub-sample as detected by the GC/MS; however, the results may not accurately represent the concentrations of the analytes in Tank 50.

  4. Radioactive waste acceptance team and generator interface yields successful implementation of waste acceptance criteria

    SciTech Connect

    Rowe, J.G.; Griffin, W.A.; Rast, D.M.

    1996-02-01

    The Fernald Environmental Management Project has developed a successful Low Level Waste Shipping Program in compliance with the Nevada Test Site Defense Waste Acceptance Criteria, Certification, and Transfer Requirements, NVO-325, Revision 1. This shipping program is responsible for the successful disposal of more than 4 million cubic feet of Low Level Waste over the past decade. The success of the Fernald Low Level Waste Shipping Program is due to the generator program staff working closely with the DOE-NV Radioactive Waste Acceptance Program Team to achieve win/win situations. The teamwork is the direct result of dedicated, proactive professionals working together toward a common objective: the safe disposition of low level radioactive waste. The growth and development of this program has many lessons learned to share with the low level waste generating community. The recognition of reciprocal interests enables consistently high annual volumes of Fernald waste disposal at the Nevada Test Site without incident. The large volumes successfully disposed serve testimony to the success of the program which is equally important to all Nevada Test Site and Fernald stakeholders. The Fernald approach to success is currently being shared with other low-level waste generators through DOE-NV sponsored outreach programs. This paper introduces examples of Fernald Environmental Restoration Management Corporation contributions to the DOE-NV Radioactive Waste Acceptance Program outreach initiatives. These practices are applicable to other low level waste disposal programs whether federal, commercial, domestic or international.

  5. How to pass a sensor acceptance test: using the gap between acceptance criteria and operational performance

    NASA Astrophysics Data System (ADS)

    Bijl, Piet

    2016-10-01

    When acquiring a new imaging system and operational task performance is a critical factor for success, it is necessary to specify minimum acceptance requirements that need to be met using a sensor performance model and/or performance tests. Currently, there exist a variety of models and test from different origin (defense, security, road safety, optometry) and they all do different predictions. This study reviews a number of frequently used methods and shows the effects that small changes in procedure or threshold criteria can have on the outcome of a test. For example, a system may meet the acceptance requirements but not satisfy the needs for the operational task, or the choice of test may determine the rank order of candidate sensors. The goal of the paper is to make people aware of the pitfalls associated with the acquisition process, by i) illustrating potential tricks to have a system accepted that is actually not suited for the operational task, and ii) providing tips to avoid this unwanted situation.

  6. 46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... identification number. (3) The report of a recognized laboratory's test data in accordance with the “acceptance... 46 Shipping 6 2011-10-01 2011-10-01 false Non-standard components; acceptance criteria and... Components § 164.019-7 Non-standard components; acceptance criteria and procedures. (a) General....

  7. RESULTS FOR THE THIRD QUARTER 2009 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Reigel, M.; Diprete, C.; Bibler, N.

    2009-11-13

    This report details the chemical and radionuclide contaminant results for the characterization of the 2009 Third Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Liquid Waste Operations (LWO) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. Recently, a review of the radionuclide inventory in Saltstone Vaults 1 and 4 identified several additional radionuclides, not currently in the WAC, which require quantification ({sup 40}K, {sup 108m}Ag, {sup 133}Ba, {sup 207}Bi, {sup 227}Ac, {sup 228}Ra, {sup 228}Th, {sup 231}Pa, {sup 247}Cm, {sup 249}Cf, {sup 251}Cf). In addition, several of the radionuclides previously reported with minimum detection limits below the requirements listed in the WAC required analysis with reduced detection limits to support future inventory reporting requirements ({sup 22}Na, {sup 26}Al, {sup 59}Ni, {sup 94}Nb, {sup 106}Ru, {sup 144}Ce, {sup 152}Eu, {sup 155}Eu, {sup 226}Ra). This added scope was formally requested in a revision to the standing Technical Task Request for CY2009 Saltstone support and is further discussed in several supporting documents. The following conclusions are drawn from the analytical results provided in this report: (1) The concentrations of the reported chemical and radioactive contaminants are less than their respective WAC targets or limits unless noted in this section. (2) The reported detection limits for {sup 59}Ni, {sup 94}Nb, {sup 247}Cm, and {sup 249}Cf are above the limits requested by LWO; however, they are below the achievable limits established by Analytical Development (AD). (3) The reported detection limit of isopropanol is lower than its WAC Limit for accident analysis in Appendix 8.1, but higher than its WAC concentration given in

  8. RESULTS FOR THE FIRST QUARTER 2011 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

    SciTech Connect

    Reigel, M.

    2011-06-15

    This report details the chemical and radionuclide contaminant results for the characterization of the 2011 First Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Waste Solidification Engineering (WSE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: (1) The concentrations of the reported chemical and radioactive contaminants were less than their respective WAC targets or limits unless noted in this section; (2) The reported detection limit for {sup 59}Ni is above both the requested limits from Reference 2 and the established limits in Reference 3; (3) The reported detection limit for {sup 94}Nb is above the requested limit from Reference 2; however, it is below the established limits in Reference 3. This is a change from previously reported results; (4) The reported concentration of {sup 242m}Am is above the target in Listed in Attachment 8.4 of the Saltstone WAC. This is a change from the previously reported results; (5) {sup 247}Cm and {sup 249}Cf are above the requested limits from Reference 2. However, they are below the limits established in Reference 3; (6) The reported detection limit for Norpar 13 is greater than the limit from Table 4 and Attachment 8.2 of the WAC; (7) The reported detection limit for Isopar L is greater than the limit from Table 3 of the WAC; and (8) Isopar L and Norpar 13 have limited solubility in aqueous solutions making it difficult to obtain consistent and reliable sub-samples. The values reported in this memo are the concentrations in the sub-sample as detected by the instrument; however, the results may not accurately represent the concentrations of the analytes in Tank

  9. 7 CFR 42.107 - Lot acceptance criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... and class of defects enumerated on the worksheet to the acceptance and rejection numbers shown in §§ 42.109 through 42.111 for the respective sample size and Acceptable Quality Level (AQL). (b) Unless otherwise specified, use the following AQL's for the respective class of defects: Defect class AQL at...

  10. 24 CFR 203.202 - Plan acceptability and acceptance renewal criteria-general.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... HUD acceptance of such change or modification, except that changes mandated by other applicable laws... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Plan acceptability and acceptance... Underwriting Procedures Insured Ten-Year Protection Plans (plan) § 203.202 Plan acceptability and...

  11. 46 CFR 54.05-17 - Weld toughness test acceptance criteria.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Weld toughness test acceptance criteria. 54.05-17... PRESSURE VESSELS Toughness Tests § 54.05-17 Weld toughness test acceptance criteria. (a) For Charpy V-notch impact tests the energy absorbed in both the weld metal and heat affected zone impact tests in...

  12. 46 CFR 28.275 - Acceptance criteria for instructors and course curricula.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Acceptance criteria for instructors and course curricula... the Aleutian Trade § 28.275 Acceptance criteria for instructors and course curricula. (a) A Fishing Vessel Safety Instructor shall submit a detailed course curriculum that relates directly to...

  13. 46 CFR 164.120-7 - Acceptance criteria.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Fire Retardant Resins for Lifeboats and Rescue Boats § 164.120-7 Acceptance... Lifesaving Equipment 1 Property Test methods (c) Material Identification Tests 2 (1) Uncatalyzed Liquid...

  14. Results For The Fourth Quarter 2012 Tank 50 WAC Slurry Sample: Chemical And Radionuclide Contaminants

    SciTech Connect

    Bannochie, C. J.

    2013-02-05

    This report details the chemical and radionuclide contaminant results for the characterization of the 2012 Fourth Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC).Information from this characterization will be used by Waste Solidification Engineering (WSE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: The concentration of the reported chemical and radioactive contaminants were less than their respective WAC Limits and Targets, unless noted in this section; Norpar 13 and Isopar L have higher detection limits compared with the Saltstone WAC. The data provided in this report is based upon the concentrations in the sub-sample, and due to the limited solubility in aqueous solution, may not represent the concentrations of the analytes in Tank 50; Diisooctyl adipate (or diisooctyl hexanedioate) and 5-methyl-3-hexanol, plasticizers, were measured at 1.30E+00 mg/L and 3.00E+00 mg/L, respectively, in one of two replicate measurements conducted on an at-depth sample. The organic analysis of the at-depth sample was conducted at the request of SRR. These analytes were below the detection limits for the surface sample; and, The low insoluble solids content increases the measurement uncertainty for insoluble species.

  15. RESULTS FOR THE FOURTH QUARTER 2013 TANK 50 WAC SLURRY SAMPLE CHEMICAL AND RADIONUCLIDE CONTAMINANTS

    SciTech Connect

    Bannochie, C.

    2014-04-01

    This report details the chemical and radionuclide contaminant results for the characterization of the 2013 Fourth Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC) in effect at that time. Information from this characterization will be used by DWPF & Saltstone Facility Engineering (DSFE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: SRR WAC targets or limits were met for all analyzed chemical and radioactive contaminants unless noted in this section. {sup 59}Ni, {sup 94}Nb, {sup 247}Cm, {sup 249}Cf, and {sup 251}Cf are above the requested SRR target concentrations. However, they are below the detection limits established by SRNL. Norpar 13 and Isopar L have higher detection limits compared with the Saltstone WAC. The data provided in this report is based upon the concentrations in the sub-sample, and due to the limited solubility of these materials in aqueous solution, may not represent the concentrations of the analytes in Tank 50. The low insoluble solids content increases the measurement uncertainty for insoluble species. The semivolatile organic analysis (SVOA) method employed in the measurement of Norpar 13 and tributyl phosphate (TBP) has resulted in the erroneous reporting of a variety of small chain alcohols, including 4-methyl-3-hexanol and 5-methyl-3-hexanol, in previous quarterly sample reports. It has now been determined that these alcohols are an artifact of the sample preparation. Further work is being conducted in SRNL to delineate the conditions that produce these alcohols, and these findings will be reported separately.

  16. Nevada Test Site waste acceptance criteria [Revision 1

    SciTech Connect

    1997-08-01

    Revision one updates the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document.

  17. Results for the First, Second, and Third Quarter Calendar Year 2015 Tank 50H WAC slurry samples chemical and radionuclide contaminants

    SciTech Connect

    Crawford, C.

    2016-02-18

    This report details the chemical and radionuclide contaminant results for the characterization of the Calendar Year (CY) 2015 First, Second, and Third Quarter sampling of Tank 50H for the Saltstone Waste Acceptance Criteria (WAC) in effect at that time. Information from this characterization will be used by Defense Waste Processing Facility (DWPF) & Saltstone Facility Engineering (D&S-FE) to support the transfer of low-level aqueous waste from Tank 50H to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50H Waste Characterization System. Previous memoranda documenting the WAC analyses results have been issued for these three samples.

  18. Example Procedures for Developing Acceptance-Range Criteria for BESTEST-EX

    SciTech Connect

    Judkoff, R.; Polly, B.; Bianchi, M.; Neymark, J.

    2010-08-01

    This document provides an example procedure for establishing acceptance-range criteria to assess results from software undergoing BESTEST-EX. This example method for BESTEST-EX is a modified version of the method described in HERS BESTEST.

  19. Assessing WAC Elements in Business Syllabi

    ERIC Educational Resources Information Center

    Nicolas, Maureen O’Day; Annous, Samer

    2013-01-01

    This study investigates syllabi for evidence of the principles of writing across the curriculum (WAC) in courses offered by the Faculty of Business (FOB) at a university operating in a non–English-speaking country. The research analyzed all syllabi of FOB courses offered in the spring 2010 semester for evidence of WAC looking for indications of…

  20. 10 CFR 50.46a - Acceptance criteria for reactor coolant system venting systems.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Acceptance criteria for reactor coolant system venting... criteria for reactor coolant system venting systems. Each nuclear power reactor must be provided with high point vents for the reactor coolant system, for the reactor vessel head, and for other systems...

  1. 10 CFR 50.46a - Acceptance criteria for reactor coolant system venting systems.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Acceptance criteria for reactor coolant system venting... criteria for reactor coolant system venting systems. Each nuclear power reactor must be provided with high point vents for the reactor coolant system, for the reactor vessel head, and for other systems...

  2. Criteria for Identifying Radiologists with Acceptable Screening Mammography Interpretive Performance based on Multiple Performance Measures

    PubMed Central

    Miglioretti, Diana L.; Ichikawa, Laura; Smith, Robert A.; Bassett, Lawrence W.; Feig, Stephen A.; Monsees, Barbara; Parikh, Jay R.; Rosenberg, Robert D.; Sickles, Edward A.; Carney, Patricia A.

    2014-01-01

    Objective Using a combination of performance measures, we updated previously proposed criteria for identifying physicians whose performance interpreting screening mammograms may indicate suboptimal interpretation skills. Materials and Methods In this Institutional Review Board-approved, HIPAA-compliant study, six expert breast imagers used a method based on the Angoff approach to update criteria for acceptable mammography performance on the basis of combined performance measures: (Group 1) sensitivity and specificity, for facilities with complete capture of false-negative cancers; and (Group 2) cancer detection rate (CDR), recall rate, and positive predictive value of a recall (PPV1), for facilities that cannot capture false negatives, but have reliable cancer follow-up information for positive mammograms. Decisions were informed by normative data from the Breast Cancer Surveillance Consortium (BCSC). Results Updated, combined ranges for acceptable sensitivity and specificity of screening mammography are: (1) sensitivity ≥80% and specificity ≥85% or (2) sensitivity 75–79% and specificity 88–97%. Updated ranges for CDR, recall rate, and PPV1 are: (1) CDR ≥6/1000, recall rate 3–20%, and any PPV1; (2) CDR 4–6/1000, recall rate 3–15%, and PPV1 ≥3%; or (3) CDR 2.5–4/1000, recall rate 5–12%, and PPV1 3–8%. Using the original criteria, 51% of BCSC radiologists had acceptable sensitivity and specificity; 40% had acceptable CDR, recall rate, and PPV1. Using the combined criteria, 69% had acceptable sensitivity and specificity and 62% had acceptable CDR, recall rate, and PPV1. Conclusion The combined criteria improve previous criteria by considering the inter-relationships of multiple performance measures and broaden the acceptable performance ranges compared to previous criteria based on individual measures. PMID:25794100

  3. Nevada Test Site Waste Acceptance Criteria (NTSWAC), Rev. 7-01

    SciTech Connect

    NSTec Environmental Management

    2009-05-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NTSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex for disposal.

  4. 48 CFR 915.607 - Criteria for acceptance and negotiation of an unsolicited proposal.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... and negotiation of an unsolicited proposal. 915.607 Section 915.607 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Unsolicited Proposals 915.607 Criteria for acceptance and negotiation of an unsolicited proposal. (c) DOE's...

  5. 48 CFR 15.607 - Criteria for acceptance and negotiation of an unsolicited proposal.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... and negotiation of an unsolicited proposal. 15.607 Section 15.607 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Unsolicited Proposals 15.607 Criteria for acceptance and negotiation of an unsolicited proposal. (a)...

  6. 48 CFR 15.607 - Criteria for acceptance and negotiation of an unsolicited proposal.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... and negotiation of an unsolicited proposal. 15.607 Section 15.607 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Unsolicited Proposals 15.607 Criteria for acceptance and negotiation of an unsolicited proposal. (a)...

  7. 48 CFR 915.607 - Criteria for acceptance and negotiation of an unsolicited proposal.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... and negotiation of an unsolicited proposal. 915.607 Section 915.607 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Unsolicited Proposals 915.607 Criteria for acceptance and negotiation of an unsolicited proposal. (c) DOE's...

  8. 46 CFR 164.019-5 - Standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Standard components; acceptance criteria and procedures. 164.019-5 Section 164.019-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation...

  9. 46 CFR 164.019-5 - Standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Standard components; acceptance criteria and procedures. 164.019-5 Section 164.019-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation...

  10. Technical Basis For Radiological Acceptance Criteria For Uranium At The Y-12 National Security Complex

    SciTech Connect

    Veinot, K. G.

    2009-07-22

    The purpose of this report is to establish radiological acceptance criteria for uranium. Other factors for acceptance not considered include criticality safety concerns, contaminants to the process stream, and impacts to the Safety Basis for the affected facilities. Three types of criteria were developed in this report. They include limits on external penetrating and non-penetrating radiation and on the internal hazard associated with inhalation of the material. These criteria are intended to alleviate the need for any special controls beyond what are normally utilized for worker protection from uranium hazards. Any proposed exceptions would require case-by-case evaluations to determine cost impacts and feasibility. Since Y-12 has set rigorous ALARA goals for worker doses, the external limits are based on assumptions of work time involved in the movement of accepted material plus the desire that external doses normally received are not exceeded, and set so that no special personnel monitoring would be required. Internal hazard controls were established so that dose contributions from non-uranium nuclides would not exceed 10% of that expected from the uranium component. This was performed using a Hazard Index (HI) previously established for work in areas contaminated with non-uranium nuclides. The radiological acceptance criteria for uranium are summarized in Table 1. Note that these limits are based on the assumption that radioactive daughter products have reached equilibrium.

  11. 77 FR 51880 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-28

    ... COMMISSION 10 CFR Parts 2 and 52 RIN 3150-AI77 Requirements for Maintenance of Inspections, Tests, Analyses... regulations related to verification of nuclear power plant construction activities through inspections, tests... determining that inspections, tests, or analyses were performed as required, or that acceptance criteria...

  12. La composition academique: les limites de l'acceptabilite (Composition for Academic Purposes: Criteria for Acceptability).

    ERIC Educational Resources Information Center

    Grenall, G. M.

    1981-01-01

    Examines the pedagogical approaches and problems attendant to the development of English writing programs for foreign students. Discusses the skills necessary to handle course work, such as essay tests, term papers and reports, theses and dissertations, and focuses particularly on diagnostic problems and acceptability criteria. Societe Nouvelle…

  13. 48 CFR 915.607 - Criteria for acceptance and negotiation of an unsolicited proposal.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Criteria for acceptance and negotiation of an unsolicited proposal. 915.607 Section 915.607 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION...

  14. 48 CFR 915.607 - Criteria for acceptance and negotiation of an unsolicited proposal.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Criteria for acceptance and negotiation of an unsolicited proposal. 915.607 Section 915.607 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION...

  15. 48 CFR 915.607 - Criteria for acceptance and negotiation of an unsolicited proposal.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Criteria for acceptance and negotiation of an unsolicited proposal. 915.607 Section 915.607 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION...

  16. Parents' "Hard" Knowledge of Admission Criteria and Acceptance in Philadelphia's High School Choice Process

    ERIC Educational Resources Information Center

    Haxton, Clarisse L.; Neild, Ruth Curran

    2012-01-01

    We examine parents' knowledge of discrete, verifiable facts--what we call "hard knowledge"--in a high school application process. Using parent survey data (n = 658) from the School District of Philadelphia, this study examines whether parents knew the admission criteria and acceptance rate at the high school they most wanted their child…

  17. Addressing patient safety through the use of 'criteria of acceptability' for medical radiation equipment.

    PubMed

    Gilley, Debbie Bray; Holmberg, Ola

    2013-02-01

    Patient safety should be considered in the use of ionising radiation equipment in medicine. The International Atomic Energy Agency (IAEA) establishes standards of safety and provides for the application of these standards, also in the area of medical use of radiation. Equipment acceptability, as it relates to radiation in medicine, is the need to satisfy the requirements or standards prior to the use of the device in patient imaging or treatment. Through IAEA activities in establishing and developing Safety Standards, Safety Reports and recommendations to regulatory authorities and end-users, it encourages the adoption of acceptability criteria that are relevant to the medical equipment and its use.

  18. Development of Waste Acceptance Criteria at 221-U Building: Initial Flow and Transport Scoping Calculations

    SciTech Connect

    Freedman, Vicky L.; Zhang, Z. F.; Keller, Jason M.; Chen, Yousu

    2007-05-30

    This report documents numerical flow and transport simulations performed that establish initial waste acceptance criteria for the potential waste streams that may be safely sequestered in the 221-U Building and similar canyon structures. Specifically, simulations were executed to identify the maximum loading of contaminant mass (without respect to volume) that can be emplaced within the 221-U Building with no more than 1 pCi/m2 of contaminant migrating outside the structure within a 1,000 year time period. The initial scoping simulations were executed in one dimension to assess important processes, and then two dimensions to establish waste acceptance criteria. Two monolithic conditions were assessed: (1) a grouted canyon monolith; and (2) a canyon monolith filled with sand, both assuming no cracks or fissures were present to cause preferential transport. A three-staged approach was taken to account for different processes that may impact the amount of contaminant that can be safely sequestered in canyon structure. In the first stage, flow and transport simulations established waste acceptance criteria based on a linear (Kd) isotherm approach. In the second stage, impacts on thermal loading were examined and the differences in waste acceptance criteria quantified. In the third stage of modeling, precipitation/dissolution reactions were considered on the release and transport of the contaminants, and the subsequent impact on the maximum contaminant loading. The reactive transport modeling is considered a demonstration of the reactive transport capability, and shows the importance of its use for future performance predictions once site-specific data have been obtained.

  19. 10 CFR 51.108 - Public hearings on Commission findings that inspections, tests, analyses, and acceptance criteria...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., tests, analyses, and acceptance criteria of combined licenses are met. 51.108 Section 51.108 Energy...) Production and Utilization Facilities § 51.108 Public hearings on Commission findings that inspections, tests, analyses, and acceptance criteria of combined licenses are met. In any public hearing requested under...

  20. 10 CFR 51.108 - Public hearings on Commission findings that inspections, tests, analyses, and acceptance criteria...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., tests, analyses, and acceptance criteria of combined licenses are met. 51.108 Section 51.108 Energy...) Production and Utilization Facilities § 51.108 Public hearings on Commission findings that inspections, tests, analyses, and acceptance criteria of combined licenses are met. In any public hearing requested under...

  1. 10 CFR 50.60 - Acceptance criteria for fracture prevention measures for lightwater nuclear power reactors for...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Acceptance criteria for fracture prevention measures for... of Licenses and Construction Permits § 50.60 Acceptance criteria for fracture prevention measures for... certifications required under § 50.82(a)(1) have been submitted, must meet the fracture toughness and...

  2. 10 CFR 50.60 - Acceptance criteria for fracture prevention measures for lightwater nuclear power reactors for...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Acceptance criteria for fracture prevention measures for... of Licenses and Construction Permits § 50.60 Acceptance criteria for fracture prevention measures for... certifications required under § 50.82(a)(1) have been submitted, must meet the fracture toughness and...

  3. 10 CFR 50.60 - Acceptance criteria for fracture prevention measures for lightwater nuclear power reactors for...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Acceptance criteria for fracture prevention measures for... of Licenses and Construction Permits § 50.60 Acceptance criteria for fracture prevention measures for... certifications required under § 50.82(a)(1) have been submitted, must meet the fracture toughness and...

  4. Corrosion control acceptance criteria for sacrificial anode type, cathodic protection systems (user guide)

    NASA Astrophysics Data System (ADS)

    Hock, Vincent F.; Noble, Michael; McLeod, Malcolm E.

    1994-07-01

    The Army currently operates and maintains more than 20,000 underground storage tanks and over 3000 miles of underground gas pipelines, all of which require some form of corrosion control. Cathodic protection is one method of corrosion control used to prevent corrosion-induced leaks when a steel structure is exposed to an aggressive soil. The corrosion control acceptance criteria for sacrificial anode type CP systems provides guidelines for the DEH/DPW cathodic protection installation inspectors whose responsibilities are to ensure that the materials and equipment specified are delivered to the job site and subsequently installed in accordance with the engineering drawings and specifications. The sacrificial anode CP acceptance criteria includes all components for the sacrificial anode system such as insulated conductors, anodes, anode backfills, and auxiliary equipment. The sacrificial anode CP acceptance criteria is composed of a checklist that lists each component and that contains a space for the inspector to either check 'yes' or 'no' to indicate whether the component complies with the job specifications. In some cases, the inspector must measure and record physical dimensions or electrical output and compare the measurements to standards shown in attached tables.

  5. Variation transmission model for setting acceptance criteria in a multi-staged pharmaceutical manufacturing process.

    PubMed

    Montes, Richard O

    2012-03-01

    Pharmaceutical manufacturing processes consist of a series of stages (e.g., reaction, workup, isolation) to generate the active pharmaceutical ingredient (API). Outputs at intermediate stages (in-process control) and API need to be controlled within acceptance criteria to assure final drug product quality. In this paper, two methods based on tolerance interval to derive such acceptance criteria will be evaluated. The first method is serial worst case (SWC), an industry risk minimization strategy, wherein input materials and process parameters of a stage are fixed at their worst-case settings to calculate the maximum level expected from the stage. This maximum output then becomes input to the next stage wherein process parameters are again fixed at worst-case setting. The procedure is serially repeated throughout the process until the final stage. The calculated limits using SWC can be artificially high and may not reflect the actual process performance. The second method is the variation transmission (VT) using autoregressive model, wherein variation transmitted up to a stage is estimated by accounting for the recursive structure of the errors at each stage. Computer simulations at varying extent of variation transmission and process stage variability are performed. For the scenarios tested, VT method is demonstrated to better maintain the simulated confidence level and more precisely estimate the true proportion parameter than SWC. Real data examples are also presented that corroborate the findings from the simulation. Overall, VT is recommended for setting acceptance criteria in a multi-staged pharmaceutical manufacturing process.

  6. Washington Teacher Preparation and Certification Regulations (WAC 180-75, WAC 180-78, and WAC 180-79).

    ERIC Educational Resources Information Center

    Washington State Board of Education, Olympia.

    Three chapters set forth the regulations of the Washington State Board of Education that relate to teacher preparation and certification. General certification provisions incorporated in chapter WAC 180-75 include rules on: (1) equivalency of standards; (2) appeal procedures; (3) certificate revocation and notification of revocation; (4)…

  7. WAC: Closing Doors or Opening Doors for Second Language Writers?

    ERIC Educational Resources Information Center

    Cox, Michelle

    2011-01-01

    Written by a WAC program director and second language writing studies scholar, this article raises questions about how second language writers are faring in WAC programs and the extent to which the fields of second language writing and WAC are informed by each other's scholarship. In this article, Cox draws from her review of 26 journal articles…

  8. Elastic-Plastic Strain Acceptance Criteria for Structures Subject to Rapidly Applied Transient Dynamic Loading

    SciTech Connect

    W.R. Solonick

    2003-04-01

    Rapidly applied transient dynamic loads produce stresses and deflections in structures that typically exceed those from static loading conditions. Previous acceptance criteria for structures designed for rapidly applied transient dynamic loading limited stresses to those determined from elastic analysis. Different stress limits were established for different grades of structure depending upon the amount of permanent set considered acceptable. Structure allowed to sustain very limited permanent set is designed to stress limits not significantly greater than yield stress. Greater permanent set in structure under rapidly applied transient dynamic loading conditions is permitted by establishing stress limits that are significantly greater than yield stress but still provide adequate safety margin (with respect to failure). This paper presents a strain-based elastic-plastic (i.e., inelastic) analysis criterion developed as an alternative to the more conservative stress-based elastic analysis stress criterion for structures subjected to rapidly applied transient dynamic loading. The strain limits established are based on material ductility considerations only and are set as a fraction of the strain at ultimate stress obtained from an engineering stress/strain curve of the material. Strains limits are categorized by type as membrane or surface and by region as general, local , or concentrated. The application of the elastic-plastic criterion provides a more accurate, less conservative design/analysis basis for structures than that used in elastic stress-based analysis criteria, while still providing adequate safety margins.

  9. Preliminary Mark-18A (Mk-18A) Target Material Recovery Program Product Acceptance Criteria

    SciTech Connect

    Robinson, Sharon M.; Patton, Bradley D.

    2016-09-01

    The Mk-18A Target Material Recovery Program (MTMRP) was established in 2015 to preserve the unique materials, e.g. 244Pu, in 65 previously irradiated Mk-18A targets for future use. This program utilizes existing capabilities at SRS and Savannah River National Laboratory (SRNL) to process targets, recover materials from them, and to package the recovered materials for shipping to ORNL. It also utilizes existing capabilities at ORNL to receive and store the recovered materials, and to provide any additional processing of the recovered materials or residuals required to prepare them for future beneficial use. The MTMRP is presently preparing for the processing of these valuable targets which is expected to begin in ~2019. As part of the preparations for operations, this report documents the preliminary acceptance criteria for the plutonium and heavy curium materials to be recovered from the Mk-18A targets at SRNL for transport and storage at ORNL. These acceptance criteria were developed based on preliminary concepts developed for processing, transporting, and storing the recovered Mk-18A materials. They will need to be refined as these concepts are developed in more detail.

  10. Initial Acceptance Criteria Concepts and Data for Assessing Longevity of Low-Voltage Cable Insulations and Jackets

    SciTech Connect

    Gary toman

    2005-03-30

    This report establishes a basis for acceptance criteria, provides a method for estimating remaining low-voltage cable life, and provides aging profiles under various thermal and radiation conditions for available cable polymer condition-monitoring techniques. This report is not meant to be the final comprehensive source of acceptance criteria, but rather is intended for trial usage so that it can be further refined for easier reference in the future.

  11. Survey of compliance with European acceptability criteria for HVL and AEC.

    PubMed

    Kepler, K; Vladimirov, A

    2013-02-01

    Half value layer (HVL) was measured for 226 general radiographic X-ray tube assemblies at 80 kV and for 53 dental X-ray tube assemblies at 70 kV, and evaluated by the previous (1997) and the new draft of European acceptability criteria (2009) for HVL as adopted from the IEC collateral standards. Fourteen per cent of the tested general radiography X-ray tube assemblies were subject to readjustment by the new criteria. In routine quality control tests, receptor entrance dose was estimated for 54 AEC systems by using post-exposure mAs values, taking into account the measured tube output at different tube potentials, HVL and estimated scattering for 10, 15 and 21 cm PMMA phantom. Receptor dose (third quartile) varied from 6.4 μGy at 60 kV to 3.8 μGy at 125 kV. The results correspond well to the draft criteria for maximum receptor dose of 10 μGy and for the patient thickness compensation.

  12. 40 CFR 90.510 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... level and passing and failing criteria for selective enforcement audits. 90.510 Section 90.510....510 Compliance with acceptable quality level and passing and failing criteria for selective... test sample until a pass decision is reached for all pollutants or a fail decision is reached for...

  13. 40 CFR 89.510 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... level and passing and failing criteria for selective enforcement audits. 89.510 Section 89.510... Compliance with acceptable quality level and passing and failing criteria for selective enforcement audits... test sample until a pass decision is reached for all pollutants or a fail decision is reached for...

  14. 40 CFR 91.608 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... level and passing and failing criteria for selective enforcement audits. 91.608 Section 91.608... with acceptable quality level and passing and failing criteria for selective enforcement audits. (a... manufacturer must test engines comprising the test sample until a pass decision is reached for HC+NOX or a...

  15. Proposed GTA welding specification and acceptance criteria for the MC4163

    SciTech Connect

    Kwiatkowski, J.J.

    1991-04-12

    This specification documents the gas tungsten arc (GTA) welding process and production weld acceptance criteria requirements for the MC4163. This document is written specifically to apply to the welds on the MC4163 and is not to be used as a general gas tungsten arc welding specification. All sections of this specification must be complied with unless specifically exempted in writing. There are a total of five welds with three different joint designs required to fabricate the MC4163. In the order of fabrication they are (1) initiator closure disc, (2) nozzle to case girth welds, two and, (3) nozzle closure disc welds, two. This specification will only address the nozzle to case girth welds and the nozzle closure disc welds.

  16. Photometric normalization of LROC WAC images

    NASA Astrophysics Data System (ADS)

    Sato, H.; Denevi, B.; Robinson, M. S.; Hapke, B. W.; McEwen, A. S.; LROC Science Team

    2010-12-01

    The Lunar Reconnaissance Orbiter Camera (LROC) Wide Angle Camera (WAC) acquires near global coverage on a monthly basis. The WAC is a push frame sensor with a 90° field of view (FOV) in BW mode and 60° FOV in 7-color mode (320 nm to 689 nm). WAC images are acquired during each orbit in 10° latitude segments with cross track coverage of ~50 km. Before mosaicking, WAC images are radiometrically calibrated to remove instrumental artifacts and to convert at sensor radiance to I/F. Images are also photometrically normalized to common viewing and illumination angles (30° phase), a challenge due to the wide angle nature of the WAC where large differences in phase angle are observed in a single image line (±30°). During a single month the equatorial incidence angle drifts about 28° and over the course of ~1 year the lighting completes a 360° cycle. The light scattering properties of the lunar surface depend on incidence(i), emission(e), and phase(p) angles as well as soil properties such as single-scattering albedo and roughness that vary with terrain type and state of maturity [1]. We first tested a Lommel-Seeliger Correction (LSC) [cos(i)/(cos(i) + cos(e))] [2] with a phase function defined by an exponential decay plus 4th order polynomial term [3] which did not provide an adequate solution. Next we employed a LSC with an exponential 2nd order decay phase correction that was an improvement, but still exhibited unacceptable frame-to-frame residuals. In both cases we fitted the LSC I/F vs. phase angle to derive the phase corrections. To date, the best results are with a lunar-lambert function [4] with exponential 2nd order decay phase correction (LLEXP2) [(A1exp(B1p)+A2exp(B2p)+A3) * cos(i)/(cos(e) + cos(i)) + B3cos(i)]. We derived the parameters for the LLEXP2 from repeat imaging of a small region and then corrected that region with excellent results. When this correction was applied to the whole Moon the results were less than optimal - no surprise given the

  17. Development of flaw acceptance criteria for aging management of spent nuclear fuel multi-purpose canisters

    SciTech Connect

    Lam, Poh -Sang; Sindelar, Robert L.

    2015-03-09

    A typical multipurpose canister (MPC) is made of austenitic stainless steel and is loaded with spent nuclear fuel assemblies. The canister may be subject to service-induced degradation when it is exposed to aggressive atmospheric environments during a possibly long-term storage period if the permanent repository is yet to be identified and readied. Because heat treatment for stress relief is not required for the construction of an MPC, stress corrosion cracking may be initiated on the canister surface in the welds or in the heat affected zone. An acceptance criteria methodology is being developed for flaw disposition should the crack-like defects be detected by periodic in-service Inspection. The first-order instability flaw sizes has been determined with bounding flaw configurations, that is, through-wall axial or circumferential cracks, and part-through-wall long axial flaw or 360° circumferential crack. The procedure recommended by the American Petroleum Institute (API) 579 Fitness-for-Service code (Second Edition) is used to estimate the instability crack length or depth by implementing the failure assessment diagram (FAD) methodology. The welding residual stresses are mostly unknown and are therefore estimated with the API 579 procedure. It is demonstrated in this paper that the residual stress has significant impact on the instability length or depth of the crack. The findings will limit the applicability of the flaw tolerance obtained from limit load approach where residual stress is ignored and only ligament yielding is considered.

  18. Development of flaw acceptance criteria for aging management of spent nuclear fuel multiple-purpose canisters

    SciTech Connect

    Lam, P.; Sindelar, R.

    2015-03-09

    A typical multipurpose canister (MPC) is made of austenitic stainless steel and is loaded with spent nuclear fuel assemblies. The canister may be subject to service-induced degradation when it is exposed to aggressive atmospheric environments during a possibly long-term storage period if the permanent repository is yet to be identified and readied. Because heat treatment for stress relief is not required for the construction of an MPC, stress corrosion cracking may be initiated on the canister surface in the welds or in the heat affected zone. An acceptance criteria methodology is being developed for flaw disposition should the crack-like defects be detected by periodic In-service Inspection. The first-order instability flaw sizes has been determined with bounding flaw configurations, that is, through-wall axial or circumferential cracks, and part-through-wall long axial flaw or 360° circumferential crack. The procedure recommended by the American Petroleum Institute (API) 579 Fitness-for-Service code (Second Edition) is used to estimate the instability crack length or depth by implementing the failure assessment diagram (FAD) methodology. The welding residual stresses are mostly unknown and are therefore estimated with the API 579 procedure. It is demonstrated in this paper that the residual stress has significant impact on the instability length or depth of the crack. The findings will limit the applicability of the flaw tolerance obtained from limit load approach where residual stress is ignored and only ligament yielding is considered.

  19. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false What controls and acceptance criteria must I have for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE...

  20. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false What controls and acceptance criteria must I have for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE...

  1. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 4 2013-04-01 2013-04-01 false What controls and acceptance criteria must I have for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE...

  2. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 4 2014-04-01 2014-04-01 false What controls and acceptance criteria must I have for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE...

  3. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 4 2012-04-01 2012-04-01 false What controls and acceptance criteria must I have for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE...

  4. 32 CFR 37.530 - What criteria do I use in deciding whether to accept a recipient's cost sharing?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... THE SECRETARY OF DEFENSE DoD GRANT AND AGREEMENT REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Pre-Award Business Evaluation Cost Sharing § 37.530 What criteria do I use in deciding whether to accept a... reimbursed by the Government through other awards. It is standard business practice for all for-profit...

  5. 32 CFR 37.530 - What criteria do I use in deciding whether to accept a recipient's cost sharing?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... and development (IR&D) costs, as described at 32 CFR 34.13(a)(5)(ii), that meet all of the criteria in paragraphs (a) through (e) of this section. IR&D is acceptable as cost sharing, even though it may be... procurement contracts is recovered as IR&D) through prices charged to their customers. Thus, the...

  6. 32 CFR 37.530 - What criteria do I use in deciding whether to accept a recipient's cost sharing?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... and development (IR&D) costs, as described at 32 CFR 34.13(a)(5)(ii), that meet all of the criteria in paragraphs (a) through (e) of this section. IR&D is acceptable as cost sharing, even though it may be... procurement contracts is recovered as IR&D) through prices charged to their customers. Thus, the...

  7. 32 CFR 37.530 - What criteria do I use in deciding whether to accept a recipient's cost sharing?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... and development (IR&D) costs, as described at 32 CFR 34.13(a)(5)(ii), that meet all of the criteria in paragraphs (a) through (e) of this section. IR&D is acceptable as cost sharing, even though it may be... procurement contracts is recovered as IR&D) through prices charged to their customers. Thus, the...

  8. The U.S. Nuclear Regulatory Commission's Strategy for Revising the RIA Acceptance Criteria

    SciTech Connect

    Clifford, Paul M.

    2007-07-01

    The U.S. Nuclear Regulatory Commission (NRC) has issued interim criteria and guidance for the reactivity-initiated accident (RIA) within the latest revision to NUREG-0800, 'Standard Review Plan' (SRP), Section 4.2, 'Fuel System Design', Appendix B (Revision 03, March 2007). The purpose of this paper is as follows: 1. present a change in regulatory staff position regarding the requirements of 10 CFR 50, Appendix A, General Design Criteria 28 (GDC28) and changes in regulatory guidance provided in Regulatory Guide (RG) 1.77, RG 1.195, RG 1.183, and previous versions of NUREG-0800 SRP; 2. describe the implementation strategy and schedule for both new reactors and the existing fleet; and 3. encourage licensees and nuclear fuel vendors to (1) develop improved core physics analytical methods to allow a more deliberate transition to the new fuel cladding failure criteria and (2) develop the technical basis to address the new core coolability criteria. (authors)

  9. Acceptance criteria for the evaluation of Category 1 fuel cycle facility physical security plans

    SciTech Connect

    Dwyer, P.A.

    1991-10-01

    This NUREG document presents criteria developed from US Nuclear Regulatory Commission regulations for the evaluation of physical security plans submitted by Category 1 fuel facility licensees. Category 1 refers to those licensees who use or possess a formula quantity of strategic special nuclear material.

  10. Data Acceptance Criteria for Standardized Human-Associated Fecal Source Identification Quantitative Real-Time PCR Methods

    PubMed Central

    Kelty, Catherine A.; Oshiro, Robin; Haugland, Richard A.; Madi, Tania; Brooks, Lauren; Field, Katharine G.; Sivaganesan, Mano

    2016-01-01

    There is growing interest in the application of human-associated fecal source identification quantitative real-time PCR (qPCR) technologies for water quality management. The transition from a research tool to a standardized protocol requires a high degree of confidence in data quality across laboratories. Data quality is typically determined through a series of specifications that ensure good experimental practice and the absence of bias in the results due to DNA isolation and amplification interferences. However, there is currently a lack of consensus on how best to evaluate and interpret human fecal source identification qPCR experiments. This is, in part, due to the lack of standardized protocols and information on interlaboratory variability under conditions for data acceptance. The aim of this study is to provide users and reviewers with a complete series of conditions for data acceptance derived from a multiple laboratory data set using standardized procedures. To establish these benchmarks, data from HF183/BacR287 and HumM2 human-associated qPCR methods were generated across 14 laboratories. Each laboratory followed a standardized protocol utilizing the same lot of reference DNA materials, DNA isolation kits, amplification reagents, and test samples to generate comparable data. After removal of outliers, a nested analysis of variance (ANOVA) was used to establish proficiency metrics that include lab-to-lab, replicate testing within a lab, and random error for amplification inhibition and sample processing controls. Other data acceptance measurements included extraneous DNA contamination assessments (no-template and extraction blank controls) and calibration model performance (correlation coefficient, amplification efficiency, and lower limit of quantification). To demonstrate the implementation of the proposed standardized protocols and data acceptance criteria, comparable data from two additional laboratories were reviewed. The data acceptance criteria

  11. Data Acceptance Criteria for Standardized Human-Associated Fecal Source Identification Quantitative Real-Time PCR Methods.

    PubMed

    Shanks, Orin C; Kelty, Catherine A; Oshiro, Robin; Haugland, Richard A; Madi, Tania; Brooks, Lauren; Field, Katharine G; Sivaganesan, Mano

    2016-05-01

    There is growing interest in the application of human-associated fecal source identification quantitative real-time PCR (qPCR) technologies for water quality management. The transition from a research tool to a standardized protocol requires a high degree of confidence in data quality across laboratories. Data quality is typically determined through a series of specifications that ensure good experimental practice and the absence of bias in the results due to DNA isolation and amplification interferences. However, there is currently a lack of consensus on how best to evaluate and interpret human fecal source identification qPCR experiments. This is, in part, due to the lack of standardized protocols and information on interlaboratory variability under conditions for data acceptance. The aim of this study is to provide users and reviewers with a complete series of conditions for data acceptance derived from a multiple laboratory data set using standardized procedures. To establish these benchmarks, data from HF183/BacR287 and HumM2 human-associated qPCR methods were generated across 14 laboratories. Each laboratory followed a standardized protocol utilizing the same lot of reference DNA materials, DNA isolation kits, amplification reagents, and test samples to generate comparable data. After removal of outliers, a nested analysis of variance (ANOVA) was used to establish proficiency metrics that include lab-to-lab, replicate testing within a lab, and random error for amplification inhibition and sample processing controls. Other data acceptance measurements included extraneous DNA contamination assessments (no-template and extraction blank controls) and calibration model performance (correlation coefficient, amplification efficiency, and lower limit of quantification). To demonstrate the implementation of the proposed standardized protocols and data acceptance criteria, comparable data from two additional laboratories were reviewed. The data acceptance criteria

  12. Preliminary waste acceptance criteria for the ICPP spent fuel and waste management technology development program

    SciTech Connect

    Taylor, L.L.; Shikashio, R.

    1993-09-01

    The purpose of this document is to identify requirements to be met by the Producer/Shipper of Spent Nuclear Fuel/High-LeveL Waste SNF/HLW in order for DOE to be able to accept the packaged materials. This includes defining both standard and nonstandard waste forms.

  13. Radioactive waste management: review on clearance levels and acceptance criteria legislation, requirements and standards.

    PubMed

    Maringer, F J; Suráň, J; Kovář, P; Chauvenet, B; Peyres, V; García-Toraño, E; Cozzella, M L; De Felice, P; Vodenik, B; Hult, M; Rosengård, U; Merimaa, M; Szücs, L; Jeffery, C; Dean, J C J; Tymiński, Z; Arnold, D; Hinca, R; Mirescu, G

    2013-11-01

    In 2011 the joint research project Metrology for Radioactive Waste Management (MetroRWM)(1) of the European Metrology Research Programme (EMRP) started with a total duration of three years. Within this project, new metrological resources for the assessment of radioactive waste, including their calibration with new reference materials traceable to national standards will be developed. This paper gives a review on national, European and international strategies as basis for science-based metrological requirements in clearance and acceptance of radioactive waste.

  14. How do the Properties of Allan Hills 84001 Compare With Accepted Criteria for Evidence of Ancient Life?

    NASA Technical Reports Server (NTRS)

    Gibson, E. K., Jr.; McKay, D. S.; Thomas-Keprta, K.; Westall, F.; Romanek, C. A.

    1998-01-01

    Criteria for Past Life: To be confident that any sample contains evidence of past life or biogenic activity, one must determine beyond a shadow of a doubt that certain well-established features or biomarker signatures are present in the sample. In the case of martian samples, the criteria for past life have not been established because if life existed on the planet, we have no way of knowing its detailed characteristics. Lacking independent evidence about the nature of possible past life on Mars, the scientific community must use, for the time being, the criteria established for ancient samples from the Earth: (1) Do we know the geologic context of the sample? Is it compatible with past life? (2) Do we know the age of the sample and its stratigraphic location? Are they understood enough to relate possible life to geologic history? (3) Does the sample contain evidence of cellular morphology? (4) What structural remains of colonies or communities exist within the samples? (5) Is there any evidence of biominerals showing chemical or mineral disequilibria? (6) Is there any evidence of stable isotope patterns unique to biology? (7) Are there any organic biomarkers present? (8) Are the features indigenous to the sample? For acceptance of past life in a geologic sample, essentially all of these criteria must he met.

  15. Improve Quality of Life - additional criteria for health and social care information technology acceptance in an ageing world.

    PubMed

    Monteiro, Jorge

    2012-01-01

    Reversing the rising cost of health and social systems is needed in ageing developed and developing countries. A new model of ageing is advocated by the World Health Organization. This new model asks for more personal health accountability and a more integrated approach on care and preventive cure. Information systems and technologies can play an important role in supporting the changes needed in order to have better and more sustainable health and social care systems. Using value and results for patients as criteria by which systems are accepted by users and by organizations can contribute to a value based competition in health and social care systems. The unified theory of acceptance and use of technology is presented, and the pertinence of adding an extension to the theory in order capture Quality of Life improvements expectations is explored.

  16. Tissue dissociation enzymes for isolating human islets for transplantation: factors to consider in setting enzyme acceptance criteria.

    PubMed

    McCarthy, Robert C; Breite, Andrew G; Green, Michael L; Dwulet, Francis E

    2011-01-27

    Tissue dissociation enzymes are critical reagents that affect the yield and quality of human pancreatic islets required for islet transplantation. The United States Food and Drug Administration's oversight of this procedure recommends laboratories to set acceptance criteria for enzymes used in the manufacture of islet products for transplantation. Currently, many laboratories base this selection on personal experience because biochemical analysis is not predictive of success of the islet isolation procedure. This review identifies the challenges of correlating results from enzyme biochemical analysis to their effectiveness in human islet isolation and suggests a path forward to address these challenges to improve control of the islet manufacturing process.

  17. SU-E-T-60: A Plan Quality Index in IMRT QA That Is Independent of the Acceptance Criteria

    SciTech Connect

    Kim, D; Kang, S; Kim, T; Kim, K; Cho, M; Shin, D; Suh, T; Kim, S; Park, S

    2015-06-15

    Purpose: In IMRT QA, plan quality evaluation is made based on pass rate under preset acceptance criteria, mostly using gamma-values. This method is convenient but, its Result highly depends on what the acceptance criteria are and suffers from the lack of sensitivity in judging how good the plan is. In this study, we introduced a simple but effective plan quality index of IMRT QA based on dose difference only to supplement such shortcomings, and investigated its validity. Methods: The proposed index is a single value which is calculated mainly based on point-by-point comparison between planned and measured dose distributions, and it becomes “1” in an ideal case. A systematic evaluation was performed with one-dimensional test dose distributions. For 3 hypothetical dose profiles, various displacements (in both dose and space) were introduced, the proposed index was calculated for each case, and the behavior of obtained indices was analyzed and compared with that of gamma evaluation. In addition, the feasibility of the index was assessed with clinical IMRT/VMAT/SBRT QA cases for different sites (prostate, head & neck, liver, lung, spine, and abdomen). Results: The proposed index showed more robust correlation with the amount of induced displacement compared to the gamma evaluation method. No matter what the acceptance criteria are (e.g., whether 3%/3mm or 2%/2mm), it was possible to clearly rank every case with the proposed index while it was difficult to do with the gamma evaluation method. Conclusion: IMRT plan quality can be evaluated quantitatively by the proposed index. It is considered that the proposed index would provide useful information for better judging the level of goodness of each plan and its Result is independent of the acceptance criteria. This work was supported by the Radiation Technology R&D program (No. 2013M2A2A7043498) and the Mid-career Researcher Program (2014R1A2A1A10050270) through the National Research Foundation of Korea funded by the

  18. Prototype Training Materials for Acceptance Criteria of Maintenance ASAP Events Occurring Within Social Context

    NASA Technical Reports Server (NTRS)

    Taylor, J. C.

    2004-01-01

    The aviation maintenance community is at a crossroads with respect to implementing the Aviation Safety Action Program (ASAP). While there is considerable interest, several key issues have emerged that cast doubt on how to assure a successful implementation, including buy-in from all levels of the company and training for key participants. There are two objectives for the present report. The first is to provide an examination of limits (or more properly, examples) of the degree of acceptability of more problematic events for risk-based decisions within the current ASAP guidelines. The second objective is to apply these limits of community standards to a set of further refined ASAP training scenarios.

  19. Building Energy Simulation Test for Existing Homes (BESTEST-EX): Instructions for Implementing the Test Procedure, Calibration Test Reference Results, and Example Acceptance-Range Criteria

    SciTech Connect

    Judkoff, R.; Polly, B.; Bianchi, M.; Neymark, J.; Kennedy, M.

    2011-08-01

    This publication summarizes building energy simulation test for existing homes (BESTEST-EX): instructions for implementing the test procedure, calibration tests reference results, and example acceptance-range criteria.

  20. WAC for the New Millennium: Strategies for Continuing Writing-Across-the-Curriculum Programs.

    ERIC Educational Resources Information Center

    McLeod, Susan H., Ed.; Miraglia, Eric, Ed.; Soven, Margot, Ed.; Thaiss, Christopher, Ed.

    Celebrating the achievements of Writing Across the Curriculum (WAC) by highlighting the promise of its future, this book presents 12 essays that describe how WAC programs have adapted and continue to adapt to meet new challenges. Essays in the book explain strategies for continuing WAC programs in an atmosphere of change; explore new avenues of…

  1. [Preanalytical phase and accreditation: acceptance criteria for samples of multisite laboratory].

    PubMed

    Dialma, Pascale; Piaulenne, Stéphane; Baty, Sonia; Zeitoun, Thierry

    2013-01-01

    Performing high quality analyses in order to help physicians in their diagnoses and to ensure better patient care: this represents our routine mission for clinical lab. To achieve this goal, all steps from sampling to the final data transfer must be controlled. The preanalytical phase is one of the most crucial, but also one of the most complicated, especially in the context of a consolidated laboratory network. Transport conditions, delays, temperature, regulatory constraints are all criteria that we need to take into consideration in order to comply to ISO 15189, section 5.4. In this context, our laboratory would like to address the following issues: to control the transport conditions in order to guarantee optimal preservation of the samples, and to define an internal process and identify non-conforming situations linked to delay in sample delivery. An original study dealing with the stability in whole blood of common clinical chemistry and immunochemistry tests in defined transport conditions (delays, temperature, tube position) was performed on a panel of 100 patients' samples. This panel is intended to be a good reflection of the patients usually seen in multi-site laboratory. We observed that most of the analytes (35 of 41) were stable in whole blood; however, some of them demonstrated instability over time. All these results were integrated into our collection manual.

  2. Separating Siamese Twins: Can We Extricate WAC from Writing Centers?

    ERIC Educational Resources Information Center

    Blumner, Jacob S.

    This paper addresses the culture of writing in higher education from a multicultural perspective of those within the "monolith." The paper first notes that writing programs, more specifically writing across the curriculum (WAC), and writing centers work in similar ways by benefiting each other and sharing the broad mission of improving…

  3. Using Bloom To Bridge the WAC/WID Divide.

    ERIC Educational Resources Information Center

    Cross, Geoffrey; Wills, Katherine

    A longitudinal study combined Stephen Tsuchdi's Workaday activities with Bloom's taxonomy of educational objectives to bridge the WAC/WID (writing across the curriculum/writing in the disciplines) divide. The researchers hoped that by combining concrete activities that can be applied across disciplines with a Bloomian conceptual framework of…

  4. Change Agent Research for Windsor Aquatic Club (CAR/WAC).

    ERIC Educational Resources Information Center

    Moriarty, Dick; Olafson, Gord

    This study of the Windsor Aquatic Club (WAC) was undertaken to investigate the following problems and questions: (a) identification of goals; (b) conflict in the interface of age class and school class swimming, as well as the interface of municipal, regional, provincial, federal, and international organizations; (c) identification of task,…

  5. R&D Plan for RISMC Industry Application #1: ECCS/LOCA Cladding Acceptance Criteria

    SciTech Connect

    Szilard, Ronaldo Henriques; Zhang, Hongbin; Epiney, Aaron Simon; Tu, Lei

    2016-04-01

    The Nuclear Regulatory Commission (NRC) is finalizing a rulemaking change that would revise the requirements in 10 CFR 50.46. In the proposed new rulemaking, designated as 10 CFR 50.46c, the NRC proposes a fuel performance-based equivalent cladding reacted (ECR) criterion as a function of cladding hydrogen content before the accident (pre-transient) in order to include the effects of higher burnup on cladding performance as well as to address other technical issues. A loss of operational margin may result due to the more restrictive cladding embrittlement criteria. Initial and future compliance with the rule may significantly increase vendor workload and licensee costs as a spectrum of fuel rod initial burnup states may need to be analyzed to demonstrate compliance. The Idaho National Laboratory (INL) has initiated a project, as part of the DOE Light Water Reactor Sustainability Program (LWRS), to develop analytical capabilities to support the industry in the transition to the new rule. This project is called the Industry Application 1 (IA1) within the Risk-Informed Safety Margin Characterization (RISMC) Pathway of LWRS. The general idea behind the initiative is the development of an Integrated Evaluation Model (IEM). The motivation is to develop a multiphysics framework to analyze how uncertainties are propagated across the stream of physical disciplines and data involved, as well as how risks are evaluated in a LOCA safety analysis as regulated under 10 CFR 50.46c. This IEM is called LOTUS which stands for LOCA Toolkit for US, and it represents the LWRS Program’s response to the proposed new rule making. The focus of this report is to complete an R&D plan to describe the demonstration of the LOCA/ECCS RISMC Industry Application # 1 using the advanced RISMC Toolkit and methodologies. This report includes the description and development plan for a RISMC LOCA tool that fully couples advanced MOOSE tools already in development in order to characterize and optimize

  6. EU landfill waste acceptance criteria and EU Hazardous Waste Directive compliance testing of incinerated sewage sludge ash.

    PubMed

    Donatello, S; Tyrer, M; Cheeseman, C R

    2010-01-01

    A hazardous waste assessment has been completed on ash samples obtained from seven sewage sludge incinerators operating in the UK, using the methods recommended in the EU Hazardous Waste Directive. Using these methods, the assumed speciation of zinc (Zn) ultimately determines if the samples are hazardous due to ecotoxicity hazard. Leaching test results showed that two of the seven sewage sludge ash samples would require disposal in a hazardous waste landfill because they exceed EU landfill waste acceptance criteria for stabilised non-reactive hazardous waste cells for soluble selenium (Se). Because Zn cannot be proven to exist predominantly as a phosphate or oxide in the ashes, it is recommended they be considered as non-hazardous waste. However leaching test results demonstrate that these ashes cannot be considered as inert waste, and this has significant implications for the management, disposal and re-use of sewage sludge ash.

  7. Acceptance criteria for flattening filter-free photon beam from standard medical electron linear accelerator: AERB task group recommendations

    PubMed Central

    Sahani, G.; Sharma, S. D.; Sharma, P. K. Dash; Deshpande, D. D.; Negi, P. S.; Sathianarayanan, V. K.; Rath, G. K.

    2014-01-01

    Medical electron linear accelerators with the capability of generating unflat photon (flattening filter-free, FFF) beams are also available commercially for clinical applications in radiotherapy. However, the beam characteristics evaluation criteria and parameters are not yet available for such photon beams. Atomic Energy Regulatory Board (AERB) of India constituted a Task Group comprising experts from regulatory agency, advisory body/research and technical institutions, and clinical radiotherapy centers in the country to evolve and recommend the acceptance criteria for the flattening filter-free (FFF) photon beams. The Task Group thoroughly reviewed the literature and inputs of the manufactures/suppliers of the FFF linac and recommended a set of dosimetry parameters for evaluating the characteristics of the unflat photon beam. The recommendations included the evaluation of quality index, degree of unflatness, difference in percentage surface dose between flat and unflat photon beams, percentage depth dose at 10 cm depth, off-axis-ratios and radiation beam penumbra. The recommended parameters were evaluated for FFF photon beams generated by three different models of the linac, and it was observed that recommended evaluation methods are simple and easy to be implemented with the existing dosimetry and quality assurance infrastructure of the linac facilities of the radiotherapy departments. Recommendations were also made for periodic quality control check of the unflat photon beams and constancy evaluation in the beam characteristics. PMID:25525307

  8. Analytical method transfer using equivalence tests with reasonable acceptance criteria and appropriate effort: extension of the ISPE concept.

    PubMed

    Kaminski, L; Schepers, U; Wätzig, H

    2010-12-15

    A method development process is commonly finalized by a method transfer from the developing to the routine laboratory. Statistical tests are performed in order to survey if a transfer succeeded or failed. However, using the classic two-sample t-test can lead to misjudgments and unsatisfying transfer results due to its test characteristics. Therefore the International Society of Pharmaceutical Engineering (ISPE) employed a fixed method transfer design using equivalence tests in their Guide for Technology Transfer. Although it was well received by analytical laboratories worldwide this fixed design can easily bring about high beta-errors (rejection of successful transfers) or high workload (many analysts employed during transfer) if sigma(AN) (error due to different analysts) exceeds 0.6%. Hence this work introduces an extended concept which will help to circumvent this disadvantage by providing guidance to select a personalized and more appropriate experimental design. First of all it demonstrates that former t-test related acceptance criteria can be scaled by a factor of 1.15, which allows for a broader tolerance without a loss of decision certainty. Furthermore a decision guidance to choose the proper number of analysts or series at given percentage acceptance limits (%AL) is presented.

  9. Women Content in Units: Force Development Test (MAX WAC)

    DTIC Science & Technology

    1977-10-03

    than the men. Some women complained of the difficulty of personal hygiene during the menstrual cycle. The problem of hygiene and menstrual discomforts...conditions, b. Enlisted personnel management policies, and c. Cost effectiveness comparisons. The HAX-WAC study was extremely useful and provides some...instruction to NCOs and officers on EW problems, so that appropriate leadership may be provided. - EW are dissatisfied with their uniforms, and field hygiene

  10. Women Content in the Army - REFORGER 77 (REF WAC 77)

    DTIC Science & Technology

    1978-05-30

    physically located in communities in close proximity to their respective units. The exercise area in which REF WAC 77 observations generally were made was...participating in the field training exercise did not seem to have any significant impact on opinions tapped by this questionnaire item. C. Sex Role...76. Do you consider yourself an athletic person? -1) Yes 2) No 77. When you were 13 to 17 years old, how often did you take part in physical activities

  11. Opposition effect of the Moon from LROC WAC data

    NASA Astrophysics Data System (ADS)

    Velikodsky, Yu. I.; Korokhin, V. V.; Shkuratov, Yu. G.; Kaydash, V. G.; Videen, Gorden

    2016-09-01

    LROC WAC images acquired in 5 bands of the visible spectral range were used to study the opposition effect for two mare and two highland regions near the lunar equator. Opposition phase curves were extracted from the images containing the opposition by separating the phase-curve effect from the albedo pattern by comparing WAC images at different phase angles (from 0° to 30°). Akimov's photometric function and the NASA Digital Terrain Model GLD100 were used in the processing. It was found that phase-curve slopes at small phase angles directly correlate with albedo, while at larger phase angles, they are anti-correlated. We suggest a parameter to characterize the coherent-backscattering component of the lunar opposition surge, which is defined as the maximum phase angle for which the opposition-surge slope increases with growing albedo. The width of the coherent-backscattering opposition effect varies from approximately 1.2° for highlands in red light to 3.9° for maria in blue light. The parameter depends on albedo, which is in agreement with the coherent-backscattering theory. The maximum amplitude of the coherent opposition effect is estimated to be near 8%. Maps of albedo and phase-curve slope at phase angles larger than those, at which the coherent-backscattering occurs, were built for the areas under study. Absolute calibration of WAC images was compared with Earth-based observations: the WAC-determined albedo is very close to the mean lunar albedo calculated using available Earth-based observations.

  12. The State of WAC/WID in 2010: Methods and Results of the U.S. Survey of the International WAC/WID Mapping Project

    ERIC Educational Resources Information Center

    Thaiss, Chris; Porter, Tara

    2010-01-01

    As writing across the curriculum (WAC) has matured and diversified as a concept and as an organizational structure in U.S. higher education, there has arisen a need for accurate, up-to-date information on the presence and characteristics of WAC and writing-in-the-disciplines (WID) programs. Following on the only previous nationwide survey of…

  13. Compiler Acceptance Criteria Guidebook

    DTIC Science & Technology

    1977-05-01

    rrograms generated by a compiler coupled with the expected life of the compiled program (number of times to be used) can often make ? 1 -6 : ! this aspect...concern are! " CPU time per statement or program * core usaae " 1 /0 access time " wait or dead ti-e " disk storage • tape drive mounts In large...left to the specification agency discretion. A prime example is the OS 370 P1eP system. 1 1 -7 0 Level of Expertise Another often neglected cost item is

  14. 40 CFR 86.610-98 - Compliance with acceptable quality level and passing and failing criteria for Selective...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... level and passing and failing criteria for Selective Enforcement Audits. 86.610-98 Section 86.610-98... quality level and passing and failing criteria for Selective Enforcement Audits. (a) The prescribed... test procedures pursuant to § 86.608-98(a). (c)(1) Pass/fail criteria. The manufacturer shall...

  15. Structural acceptance criteria for the evaulation of existing double-shell waste storage tanks located at the Hanford site, Richland, Washington

    SciTech Connect

    Julyk, L.J.; Day, A.D.; Dyrness, A.D.; Moore, C.J.; Peterson, W.S.; Scott, M.A.; Shrivastava, H.P.; Sholman, J.S.; Watts, T.N.

    1995-09-01

    The structural acceptance criteria contained herein for the evaluation of existing underground double-shell waste storage tanks located at the Hanford Site is part of the Life Management/Aging Management Program of the Tank Waste Remediation System. The purpose of the overall life management program is to ensure that confinement of the waste is maintained over the required service life of the tanks. Characterization of the present condition of the tanks, understanding and characterization of potential degradation mechanisms, and development of tank structural acceptance criteria based on previous service and projected use are prerequisites to assessing tank integrity, to projecting the length of tank service, and to developing and applying prudent fixes or repairs. The criteria provided herein summarize the requirements for the analysis and structural qualification of the existing double-shell tanks for continued operation. Code reconciliation issues and material degradation under aging conditions are addressed. Although the criteria were developed for double-shell tanks, many of the provisions are equally applicable to single-shell tanks. However, the criteria do not apply to the evaluation of tank appurtenances and buried piping.

  16. Implementation of Writing across the Curriculum (WAC) Learning Approaches in Social Work and Sociology Gerontology Courses

    ERIC Educational Resources Information Center

    Kolb, Patricia

    2013-01-01

    This article describes the goals and methods of the international Writing Across the Curriculum (WAC) movement in higher education, and WAC-enriched learning approaches that the author used in teaching a social work gerontology practice course and a sociological theories of aging course. The author's in-class, low-stakes, nongraded writing…

  17. Notes from the Margins: WAC, WID, and the Politics of Place(ment)

    ERIC Educational Resources Information Center

    Cook, Paul G.

    2014-01-01

    This institutional autoethnography (IAE) explores the political and pedagogical dynamics of WPA and WAC/WID work within an exceedingly small, resolutely single-sex, and assuredly rural liberal arts campus ecology. Working within a theoretical framework informed by WAC/WID's historical commitment to increasing literacy in students from diverse…

  18. Selecting the Acceptance Criteria of Medicines in the Reimbursement List of Public Health Insurance of Iran, Using the “Borda” Method: a Pilot Study

    PubMed Central

    Viyanchi, Amir; Rasekh, Hamid Reza; Rajabzadeh Ghatari, Ali; SafiKhani, Hamid Reza

    2015-01-01

    Decision-making for medicines to be accepted in Iran’s public health insurance reimbursement list is a complex process and involves factors, which should be considered in applying a coverage for medicine costs. These processes and factors are not wholly assessed, while assessment of these factors is an essential need for getting a transparent and evidence-based approach toward medicine reimbursement in Iran. This paper aims to show an evidence-based approach toward medicine selection criteria to inform the medical reimbursement decision makers in Iranian health insurance organizations. To explore an adaptable decision-making framework while incorporating a method called “Borda” in medicine reimbursement assessment, we used the help of an expert group including decision makers and clinical researchers who are also policy makers to appraise the five chief criteria that have three sub criteria (Precision, Interpretability, and Cost). Also software “Math-lab”7, “SPSS” 17 and Excel 2007 were used in this study. “Borda” estimates the amount of perceived values from different criteria and creates a range from one to five while providing a comprehensive measurement of a large spectrum of criteria. Participants reported that the framework provided an efficient approach to systematic consideration in a pragmatic format consisting of many parts to guide decision-makings, including criteria and value (a model with the core of Borda) and evidences (medicine reimbursement based on criteria). The most important criterion for medicine acceptance in health insurance companies, in Iran, is the "life-threatening" factor and "evidence quality" is accounted as the fifth important factor. This pilot study showed the usefulness of incorporating Borda in medicine reimbursement decisions to support a transparent and systematic appraisal of health insurance companies' deeds. Further research is needed to advance Borda-based approaches that are effective on health insurance

  19. SRNL PHASE 1 ASSESSMENT OF THE WAC/DQO AND UNIT OPERATIONS FOR THE WTP WASTE QUALIFICATION PROGRAM

    SciTech Connect

    Peeler, D.; Adamson, D.; Bannochie, C.; Cozzi, A.; Eibling, R.; Hay, M.; Hansen, E.; Herman, D.; Martino, C.; Nash, C.; Pennebaker, F.; Poirier, M.; Reboul, S.; Stone, M.; Taylor-Pashow, K.; White, T.; Wilmarth, B.

    2012-05-16

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is currently transitioning its emphasis from a design and construction phase toward start-up and commissioning. With this transition, the WTP Project has initiated more detailed assessments of the requirements related to actual processing of the Hanford Site tank waste. One particular area of interest is the waste qualification program to be implemented to support the WTP. Given the successful implementation of similar waste qualification efforts at the Savannah River Site (SRS), based on critical technical support and guidance from the Savannah River National Laboratory (SRNL), WTP requested the utilization of subject matter experts from SRNL to support a technology exchange to perform a review of the WTP waste qualification program, discuss the general qualification approach at SRS, and to identify critical lessons learned through the support of DWPF's sludge batch qualification efforts. As part of Phase 1, SRNL subject matter experts in critical technical and/or process areas reviewed specific WTP waste qualification information. The Phase 1 review was a collaborative, interactive, and iterative process between the two organizations. WTP provided specific analytical procedures, descriptions of equipment, and general documentation as baseline review material. SRNL subject matter experts reviewed the information and, as appropriate, requested follow-up information or clarification to specific areas of interest. This process resulted in multiple teleconferences with key technical contacts from both organizations resolving technical issues that lead to the results presented in this report. This report provides the results of SRNL's Phase 1 review of the WAC-DQO waste acceptance criteria and processability parameters, and the specific unit operations which are required to support WTP waste qualification efforts. The review resulted in SRNL providing concurrence, alternative methods, or gap identification

  20. A FRAMEWORK TO DEVELOP FLAW ACCEPTANCE CRITERIA FOR STRUCTURAL INTEGRITY ASSESSMENT OF MULTIPURPOSE CANISTERS FOR EXTENDED STORAGE OF USED NUCLEAR FUEL

    SciTech Connect

    Lam, P.; Sindelar, R.; Duncan, A.; Adams, T.

    2014-04-07

    A multipurpose canister (MPC) made of austenitic stainless steel is loaded with used nuclear fuel assemblies and is part of the transfer cask system to move the fuel from the spent fuel pool to prepare for storage, and is part of the storage cask system for on-site dry storage. This weld-sealed canister is also expected to be part of the transportation package following storage. The canister may be subject to service-induced degradation especially if exposed to aggressive environments during possible very long-term storage period if the permanent repository is yet to be identified and readied. Stress corrosion cracking may be initiated on the canister surface in the welds or in the heat affected zone because the construction of MPC does not require heat treatment for stress relief. An acceptance criteria methodology is being developed for flaw disposition should the crack-like defects be detected by periodic Inservice Inspection. The external loading cases include thermal accident scenarios and cask drop conditions with the contribution from the welding residual stresses. The determination of acceptable flaw size is based on the procedure to evaluate flaw stability provided by American Petroleum Institute (API) 579 Fitness-for-Service (Second Edition). The material mechanical and fracture properties for base and weld metals and the stress analysis results are obtained from the open literature such as NUREG-1864. Subcritical crack growth from stress corrosion cracking (SCC), and its impact on inspection intervals and acceptance criteria, is not addressed.

  1. Quality of laboratory studies assessing effects of Bt-proteins on non-target organisms: minimal criteria for acceptability.

    PubMed

    De Schrijver, Adinda; Devos, Yann; De Clercq, Patrick; Gathmann, Achim; Romeis, Jörg

    2016-08-01

    The potential risks that genetically modified plants may pose to non-target organisms and the ecosystem services they contribute to are assessed as part of pre-market risk assessments. This paper reviews the early tier studies testing the hypothesis whether exposure to plant-produced Cry34/35Ab1 proteins as a result of cultivation of maize 59122 is harmful to valued non-target organisms, in particular Arthropoda and Annelida. The available studies were assessed for their scientific quality by considering a set of criteria determining their relevance and reliability. As a case-study, this exercise revealed that when not all quality criteria are met, weighing the robustness of the study and its relevance for risk assessment is not obvious. Applying a worst-case expected environmental concentration of bioactive toxins equivalent to that present in the transgenic crop, confirming exposure of the test species to the test substance, and the use of a negative control were identified as minimum criteria to be met to guarantee sufficiently reliable data. This exercise stresses the importance of conducting studies meeting certain quality standards as this minimises the probability of erroneous or inconclusive results and increases confidence in the results and adds certainty to the conclusions drawn.

  2. Development of acceptance criteria for batches of silane primer for external tank thermal protection system bonding applications

    NASA Technical Reports Server (NTRS)

    Mikes, F.

    1985-01-01

    Fourier transform infrared spectroscopy is currently the best technique for observing hydrolytic changes in DC 1200 silane the primers caused by moisture in the atmosphere. To further prove that FTIR can be used as a criterion test for acceptance of silane primer lots, intensities of the FTIR OH- band are being compared with primer adhesive bond strength using a mechanical test suggested by NASA. Results of tests for shear strength and Oh-absorption are tabulated and compared with FTIR absorption intensities in the OH-region.

  3. Data Quality Objectives and Criteria for Basic Information, Acceptable Uncertainty, and Quality-Assurance and Quality-Control Documentation

    USGS Publications Warehouse

    Granato, Gregory E.; Bank, Fred G.; Cazenas, Patricia A.

    1998-01-01

    The Federal Highway Administration and State transportation agencies have the responsibility of determining and minimizing the effects of highway runoff on water quality; therefore, they have been conducting an extensive program of water-quality monitoring and research during the last 25 years. The objectives and monitoring goals of highway runoff studies have been diverse, because the highway community must address many different questions about the characteristics and impacts of highway runoff. The Federal Highway Administration must establish that available data and procedures that are used to assess and predict pollutant loadings and impacts from highway stormwater runoff are valid, current, and technically supportable. This report examines criteria for evaluating water-quality data and resultant interpretations. The criteria used to determine if data are valid (useful for intended purposes), current, and technically supportable are derived from published materials from the Federal Highway Administration, the U.S. Environmental Protection Agency, the Intergovernmental Task Force on Monitoring Water Quality, the U.S. Geological Survey and from technical experts throughout the U.S. Geological Survey. Water-quality data that are documented to be meaningful, representative, complete, precise, accurate, comparable, and admissible as legal evidence will meet the scientific, engineering, and regulatory needs of highway agencies. Documentation of basic information, such as compatible monitoring objectives and program design features; metadata (when, where, and how data were collected as well as who collected and analyzed the data); ancillary information (explanatory variables and study-site characteristics); and legal requirements are needed to evaluate data. Documentation of sufficient quality-assurance and quality-control information to establish the quality and uncertainty in the data and interpretations also are needed to determine the comparability and utility of

  4. Establishment of design criteria for acceptable failure modes and fail safe considerations for the space shuttle structural system

    NASA Technical Reports Server (NTRS)

    Westrup, R. W.

    1972-01-01

    Investigations of fatigue life, and safe-life and fail-safe design concepts as applied to space shuttle structure are summarized. The results are evaluated to select recommended structural design criteria to provide assurance that premature failure due to propagation of undetected crack-like defects will not occur during shuttle operational service. The space shuttle booster, GDC configuration B-9U, is selected as the reference vehicle. Structural elements used as basis of detail analyses include wing spar caps, vertical stabilizer skins, crew compartment skin, orbiter support frame, and propellant tank shell structure. Fatigue life analyses of structural elements are performed to define potential problem areas and establish upper limits of operating stresses. Flaw growth analyses are summarized in parametric form over a range of initial flaw types and sizes, operating stresses and service life requirements. Service life of 100 to 500 missions is considered.

  5. Acceptance Criteria for Corrosion Resistance of Medical Devices: Statistical Analysis of Nitinol Pitting in In Vivo Environments

    NASA Astrophysics Data System (ADS)

    Eiselstein, Lawrence E.; Steffey, Duane; Nissan, Andrew; Corlett, Nigel; Dugnani, Roberto; Kus, Esra; Stewart, Sarah G.

    2009-08-01

    ASTM F 2129 test method nor the FDA provides any guidance as to what constitutes an acceptance criterion for the corrosion resistance of implantable medical devices. Neither provide any guidance on how many samples to test or how to handle censored data, i.e. datasets where there are only a few tests that breakdown. The development of both a statistically valid acceptance criterion for corrosion resistance and a method of evaluation would be of significant benefit to the medical device community. This study of 420 nitinol cyclic polarization tests, which builds on previous research that was presented at SMST 2007, investigates the effect of long-term exposure to simulated in vivo environments with differing degrees of aeration. This was accomplished by pre-exposing electropolished (EP) nitinol to phosphate buffered saline (PBS) at 37 °C that had been sparged with either ultra high purity nitrogen or laboratory air. Immersion times ranged from 1 h up to 30 days. A total of 290 EP samples were tested in order to obtain a reasonable number of samples with breakdown, i.e. pitted. In addition, a total of 130 mechanical polished (MP) samples were also analyzed. This data allow us to test our statistical model that was presented at SMST 2007. This model takes into account the probability of breakdown per unit of exposed surface area and, if breakdown occurs, predicts the probability that E b - E r is greater than some threshold value. Aerated PBS environments were found to have a large influence on the margin of safety against pitting in vivo. Statistical methods for treating highly right censored pitting data are presented.

  6. Gender Incongruence of Adolescence and Adulthood: Acceptability and Clinical Utility of the World Health Organization's Proposed ICD-11 Criteria.

    PubMed

    Beek, Titia F; Cohen-Kettenis, Peggy T; Bouman, Walter P; de Vries, Annelou L C; Steensma, Thomas D; Witcomb, Gemma L; Arcelus, Jon; Richards, Christina; Elaut, Els; Kreukels, Baudewijntje P C

    2016-01-01

    The World Health Organization (WHO) is currently updating the tenth version of their diagnostic tool, the International Classification of Diseases (ICD, WHO, 1992). Changes have been proposed for the diagnosis of Transsexualism (ICD-10) with regard to terminology, placement and content. The aim of this study was to gather the opinions of transgender individuals (and their relatives/partners) and clinicians in the Netherlands, Flanders (Belgium) and the United Kingdom regarding the proposed changes and the clinical applicability and utility of the ICD-11 criteria of 'Gender Incongruence of Adolescence and Adulthood' (GIAA). A total of 628 participants were included in the study: 284 from the Netherlands (45.2%), 8 from Flanders (Belgium) (1.3%), and 336 (53.5%) from the UK. Most participants were transgender people (or their partners/relatives) (n = 522), 89 participants were healthcare providers (HCPs) and 17 were both healthcare providers and (partners/relatives of) transgender people. Participants completed an online survey developed for this study. Most participants were in favor of the proposed diagnostic term of 'Gender Incongruence' and thought that this was an improvement on the ICD-10 diagnostic term of 'Transsexualism'. Placement in a separate chapter dealing with Sexual- and Gender-related Health or as a Z-code was preferred by many and only a small number of participants stated that this diagnosis should be excluded from the ICD-11. In the UK, most transgender participants thought there should be a diagnosis related to being trans. However, if it were to be removed from the chapter on "psychiatric disorders", many transgender respondents indicated that they would prefer it to be removed from the ICD in its entirety. There were no large differences between the responses of the transgender participants (or their partners and relatives) and HCPs. HCPs were generally positive about the GIAA diagnosis; most thought the diagnosis was clearly defined and easy

  7. Implementation of Writing Across the Curriculum (WAC) learning approaches in social work and sociology gerontology courses.

    PubMed

    Kolb, Patricia

    2013-01-01

    This article describes the goals and methods of the international Writing Across the Curriculum (WAC) movement in higher education, and WAC-enriched learning approaches that the author used in teaching a social work gerontology practice course and a sociological theories of aging course. The author's in-class, low-stakes, nongraded writing assignments facilitated students' development of knowledge about gerontological practice and sociological theories, as well as analytical thinking. The assignments are influenced by WAC's perspective that when students write their reactions to information, their understanding and retention of information improves; that writing can facilitate the application of new content to students' own lives and interests; and that increased frequency of writing increases writing comfort and maintenance and can result in the improvement of writing skills. The students' reactions to the assignments have been very positive.

  8. Lessons for WAC/WID from Language Learning Research: Multicompetence, Register Acquisition, and the College Writing Student

    ERIC Educational Resources Information Center

    Hall, Jonathan; Navarro, Nela

    2011-01-01

    This article is a collaboration between WAC/WID and second language acquisition (SLA) specialists. It examines alternate disciplinary notions of the place of writing among other skills and adapts concepts from SLA theory and pedagogy with the goal of providing new interdisciplinary options for WAC/WID research and classroom practice.

  9. WAC at Century's End: Haunted by the Ghost of Fred Newton Scott.

    ERIC Educational Resources Information Center

    McLeod, Susan H.

    1997-01-01

    Discusses two danger signs for writing across the curriculum (WAC) program survival, dealing with their cross-curricular structure, and their heavy dependence on just one person for their health and continuation. Outlines two cases from the history of writing instruction at the University of Michigan providing a precautionary tale for both kinds…

  10. Building on Common Ground: Overcoming Resistance to WAC in the Technical College.

    ERIC Educational Resources Information Center

    Weiser, Michael S.

    Writing-Across-the-Curriculum (WAC) program administrators who wish to work effectively and amicably with faculty in the two-year technical college would do well to remember two principles: (1) work first with the type of writing that already exists in the curriculum; and (2) try to speak a language to the faculty outside the field of composition…

  11. Pairing WAC and Quantitative Reasoning through Portfolio Assessment and Faculty Development

    ERIC Educational Resources Information Center

    Rutz, Carol; Grawe, Nathan D.

    2009-01-01

    Writing across the curriculum has been a pedagogy associated with faculty development since the earliest days of the movement. Carleton College, an early adopter of WAC pedagogy and faculty development, has, in the last decade, added portfolio assessment to the combination with positive results. Among the unexpected consequences has been a…

  12. Pathogen inactivation of whole blood and red cell components: an overview of concept, design, developments, criteria of acceptability and storage lesion.

    PubMed

    Seghatchian, Jerard; Putter, Jeffrey S

    2013-10-01

    Multilayer preventative strategies have been instituted to enhance transfusion safety for patients in need of critical blood components. Presently blood safety is at its highest levels, with the implementation of precautionary/preventative measures against vCJD, bacterial and viral contamination of the blood supply. The implementation of these strategies together with advances in automation and computerization led to significant improvements in standardisation for transfusion practices. These include validation, verification, adherence to GLP and GMP and other regulatory requirements. In most European countries, universal prestorage leukodepletion is routine practice. In France proactive pathogen inactivation treatments [PITs] have been implemented emphasizing patient safety. This at least conceptually reduces the risk of transfusing viable WBCs, emerging bacteria and viruses, all with potential transfusion complications. In the UK, prion removal filters for red cell products are used selectively for special groups of patients. Some research establishments are exploring the potential impact of pathogen inactivation of whole blood or red cell components, using the new generation of S-303 PIT and the prion removal filters in combination. It needs to be determined whether such a combined strategy, applied synergistically, enhances red cell transfusion safety without compromising the overall criteria of acceptability. It is necessary to critically examine the impact of a new generation of PIT technologies, which may exacerbate the red cell storage lesion and cause the development of undesirable antibodies in the recipient. The development of innovative laboratory tools is vital to study impacts of these measures on the quality of stored blood and their clinical outcome. The ultimate aim of red cell transfusion is to provide oxygen enriched red blood cells to the microcirculations and tissues. Definitive studies are needed to establish the potential unforeseen negative

  13. Genome-wide siRNA screen reveals amino acid starvation-induced autophagy requires SCOC and WAC

    PubMed Central

    McKnight, Nicole C; Jefferies, Harold B J; Alemu, Endalkachew A; Saunders, Rebecca E; Howell, Michael; Johansen, Terje; Tooze, Sharon A

    2012-01-01

    Autophagy is a catabolic process by which cytoplasmic components are sequestered and transported by autophagosomes to lysosomes for degradation, enabling recycling of these components and providing cells with amino acids during starvation. It is a highly regulated process and its deregulation contributes to multiple diseases. Despite its importance in cell homeostasis, autophagy is not fully understood. To find new proteins that modulate starvation-induced autophagy, we performed a genome-wide siRNA screen in a stable human cell line expressing GFP–LC3, the marker-protein for autophagosomes. Using stringent validation criteria, our screen identified nine novel autophagy regulators. Among the hits required for autophagosome formation are SCOC (short coiled-coil protein), a Golgi protein, which interacts with fasciculation and elongation protein zeta 1 (FEZ1), an ULK1-binding protein. SCOC forms a starvation-sensitive trimeric complex with UVRAG (UV radiation resistance associated gene) and FEZ1 and may regulate ULK1 and Beclin 1 complex activities. A second candidate WAC is required for starvation-induced autophagy but also acts as a potential negative regulator of the ubiquitin-proteasome system. The identification of these novel regulatory proteins with diverse functions in autophagy contributes towards a fuller understanding of autophagosome formation. PMID:22354037

  14. [Permanent essential defacement--remarks on the possibilities of verification of the accepted criteria in medico-legal certification in criminal and civil law proceedings].

    PubMed

    Chowaniec, Czesław; Nowak, Agnieszka; Jabłoński, Christian; Neniczka, Stanisława

    2007-01-01

    Despite the fact that some criteria of medico-legal certification in criminal and civil proceedings have been established, there are still some topics which are controversial and thus require modification. This is also true of the notion of "permanent essential defacement". In the opinion of the authors, changes in social conventions that are occurring nowadays, as well as a highly diversified, subjective perception of esthetic values indicate the need for discussing a possible modification of the presently obligatory criteria. Apart from the assessment of posttraumatic changes, an important problem is posed by defining the notion of "a part of the body customarily open to the view ". Additionally, the authors bring up for discussion the issue of experts taking into consideration the age and sex of the victims while assessing damages. A separate problem lies in difficulties in assessing the degree of detriment to health because of defacement due to the fact that official tables for evaluating permanent or long-term detriment to health do not include relevant information.

  15. WAC regulates mTOR activity by acting as an adaptor for the TTT and Pontin/Reptin complexes

    PubMed Central

    David-Morrison, Gabriela; Xu, Zhen; Rui, Yan-Ning; Charng, Wu-Lin; Jaiswal, Manish; Yamamoto, Shinya; Xiong, Bo; Zhang, Ke; Sandoval, Hector; Duraine, Lita; Zuo, Zhongyuan; Zhang, Sheng; Bellen, Hugo J.

    2015-01-01

    SUMMARY The ability to sense energy status is crucial in the regulation of metabolism via the mechanistic Target of Rapamycin Complex 1 (mTORC1). The assembly of the TTT-Pontin/Reptin complex is responsive to changes in energy status. In energy sufficient conditions, the TTT-Pontin/Reptin complex promotes mTORC1 dimerization and mTORC1-Rag interaction, which are critical for mTORC1 activation. We show that WAC is a regulator of energy-mediated mTORC1 activity. In a Drosophila screen designed to isolate mutations that cause neuronal dysfunction, we identified wacky, the homolog of WAC. Loss of Wacky leads to neurodegeneration, defective mTOR activity and increased autophagy. Wacky and WAC have conserved physical interactions with mTOR and its regulators, including Pontin and Reptin which bind to the TTT complex to regulate energy-dependent activation of mTORC1. WAC promotes the interaction between TTT and Pontin/Reptin in an energy-dependent manner, thereby promoting mTORC1 activity by facilitating mTORC1 dimerization and mTORC1-Rag interaction. PMID:26812014

  16. "A Way to Talk about the Institution as Opposed to Just My Field": WAC Fellowships and Graduate Student Professional Development

    ERIC Educational Resources Information Center

    Cripps, Michael J.; Hall, Jonathan; Robinson, Heather M.

    2016-01-01

    The teaching assistantship is a venerable model for funding graduate studies, staffing undergraduate courses, and providing pedagogical support for emerging college and university instructors. In this article, we present a variation of this model of graduate student support: the WAC Fellowship at the City University of New York. Using survey data…

  17. Criteria for the development and use of the methodology for environmentally-acceptable fossil energy site evaluation and selection. Volume 2. Final report

    SciTech Connect

    Eckstein, L.; Northrop, G.; Scott, R.

    1980-02-01

    This report serves as a companion document to the report, Volume 1: Environmentally-Acceptable Fossil Energy Site Evaluation and Selection: Methodology and Users Guide, in which a methodology was developed which allows the siting of fossil fuel conversion facilities in areas with the least environmental impact. The methodology, known as SELECS (Site Evaluation for Energy Conversion Systems) does not replace a site specific environmental assessment, or an environmental impact statement (EIS), but does enhance the value of an EIS by thinning down the number of options to a manageable level, by doing this in an objective, open and selective manner, and by providing preliminary assessment and procedures which can be utilized during the research and writing of the actual impact statement.

  18. Photometric parameter maps of the Moon derived from LROC WAC images

    NASA Astrophysics Data System (ADS)

    Sato, H.; Robinson, M. S.; Hapke, B. W.; Denevi, B. W.; Boyd, A. K.

    2013-12-01

    Spatially resolved photometric parameter maps were computed from 21 months of Lunar Reconnaissance Orbiter Camera (LROC) Wide Angle Camera (WAC) images. Due to a 60° field-of-view (FOV), the WAC achieves nearly global coverage of the Moon each month with more than 50% overlap from orbit-to-orbit. From the repeat observations at various viewing and illumination geometries, we calculated Hapke bidirectional reflectance model parameters [1] for 1°x1° "tiles" from 70°N to 70°S and 0°E to 360°E. About 66,000 WAC images acquired from February 2010 to October 2011 were converted from DN to radiance factor (I/F) though radiometric calibration, partitioned into gridded tiles, and stacked in a time series (tile-by-tile method [2]). Lighting geometries (phase, incidence, emission) were computed using the WAC digital terrain model (100 m/pixel) [3]. The Hapke parameters were obtained by model fitting against I/F within each tile. Among the 9 parameters of the Hapke model, we calculated 3 free parameters (w, b, and hs) by setting constant values for 4 parameters (Bco=0, hc=1, θ, φ=0) and interpolating 2 parameters (c, Bso). In this simplification, we ignored the Coherent Backscatter Opposition Effect (CBOE) to avoid competing CBOE and Shadow Hiding Opposition Effect (SHOE). We also assumed that surface regolith porosity is uniform across the Moon. The roughness parameter (θ) was set to an averaged value from the equator (× 3°N). The Henyey-Greenstein double lobe function (H-G2) parameter (c) was given by the 'hockey stick' relation [4] (negative correlation) between b and c based on laboratory measurements. The amplitude of SHOE (Bso) was given by the correlation between w and Bso at the equator (× 3°N). Single scattering albedo (w) is strongly correlated to the photometrically normalized I/F, as expected. The c shows an inverse trend relative to b due to the 'hockey stick' relation. The parameter c is typically low for the maria (0.08×0.06) relative to the

  19. Baffling system for the Wide Angle Camera (WAC) of ROSETTA mission

    NASA Astrophysics Data System (ADS)

    Brunello, Pierfrancesco; Peron, Fabio; Barbieri, Cesare; Fornasier, Sonia

    2000-10-01

    After the experience of GIOTTO fly-by to comet Halley in 1986, the European Space Agency planned to improve the scientific knowledge of these astronomical objects by means of an even more ambitious rendezvous mission with another comet (P/Wirtanen). This mission, named ROSETTA, will go on from 2003 to 2013, ending after the comet perihelion phase and including also the fly-by with two asteroids of the main belt (140 Siwa and 4979 Otawara). Scientific priority of the mission is the in situ investigation of the cometary nucleus, with the aim of better understanding the formation and the composition of planetesimals and their evolution over the last 4.5 billions of years. In this context, the Authors were involved in the design of the baffling for the Wide Angle Camera (WAC) of the imaging system (OSIRIS) carried on board of the spacecraft. Scientific requirements for the WAC are : a large field of view (FOV) of 12 degree(s) x 12 degree(s) with a resolution of 100 (mu) rad per pixel, UV response, and a contrast ratio of 10-4 in order to detect gaseous and dusty features close to the nucleus of the comet. TO achieve these performances, a fairly novel class of optical solutions employing off-axis sections of concentric mirrors was explored. Regarding baffling, the peculiar demand was the rejection of stray-light generated by the optics for sources within the FOV, since the optical entrance aperture is located at the level of the secondary mirror (instead of the primary as usual). This paper describes the baffle design and analyzes its performances, calculated by numerical simulation with ray tracing methods, at different angles of incidence of the light, for sources both outside and inside the field of view.

  20. Perspective: Towards environmentally acceptable criteria for downstream fish passage through mini hydro and irrigation infrastructure in the Lower Mekong River Basin

    SciTech Connect

    Baumgartner, Lee J.; Daniel Deng, Z.; Thorncraft, Garry; Boys, Craig A.; Brown, Richard S.; Singhanouvong, Douangkham; Phonekhampeng, Oudom

    2014-01-01

    Tropical rivers have high annual discharges optimal for hydropower and irrigation development. The Mekong River is one of the largest tropical river systems, supporting a unique mega-diverse fish community. Fish are an important commodity in the Mekong, contributing a large proportion of calcium, protein, and essential nutrients to the diet of the local people and providing a critical source of income for rural households. Many of these fish migrate not only upstream and downstream within main-channel habitats but also laterally into highly productive floodplain habitat to both feed and spawn. Most work to date has focused on providing for upstream fish passage, but downstream movement is an equally important process to protect. Expansion of hydropower and irrigation weirs can disrupt downstream migrations and it is important to ensure that passage through regulators or mini hydro systems is not harmful or fatal. Many new infrastructure projects (<6 m head) are proposed for the thousands of tributary streams throughout the Lower Mekong Basin and it is important that designs incorporate the best available science to protect downstream migrants. Recent advances in technology have provided new techniques which could be applied to Mekong fish species to obtain design criteria that can facilitate safe downstream passage. Obtaining and applying this knowledge to new infrastructure projects is essential in order to produce outcomes that are more favorable to local ecosystems and fisheries.

  1. Standard format and content acceptance criteria for the Material Control and Accounting (MC and A) Reform Amendment: 10 CFR Part 74, Subpart E. Revision 1

    SciTech Connect

    1995-04-01

    In 1987 the NRC revised the material control and accounting requirements for NRC licensees authorized to possess and use a formula quantity (i.e., 5 formula kilograms or more) of strategic special nuclear material. Those revisions issued as 10 CFR 74.51-59 require timely monitoring of in-process inventory and discrete items to detect anomalies potentially indicative of material losses. Timely detection and enhanced loss localization capabilities are beneficial to alarm resolution and also for material recovery in the event of an actual loss. NUREG-1280 was issued in 1987 to present criteria that could be used by applicants, licensees, and NRC license reviewers in the initial preparation and subsequent review of fundamental nuclear material control (FNMC) plans submitted in response to the Reform Amendment. This document is also intended for both licensees and license reviewers with respect to FNMC plan revisions. General performance objectives, system capabilities, process monitoring, item monitoring, alarm resolution, quality assurance, and accounting are addressed. This revision to NUREG-1280 is an expansion of the initial edition, which clarifies and expands upon several topics and addresses issues identified under Reform Amendment implementation experience.

  2. Preliminary Systems Design Study assessment report. Volume 6, Waste Isolation Pilot Plant and transportation package acceptable concepts

    SciTech Connect

    Mayberry, J.L.; Feizollahi, F.; Del Signore, J.C.

    1992-01-01

    The System Design Study (SDS), part of the Waste Technology Development Department at the Idaho National Engineering Laboratory (INEL), examined techniques for the remediation of hazardous and transuranic waste stored at Radioactive Waste Management Complex`s Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each concept. This volume contains introduction section containing a brief SDS background and lists the general assumptions and considerations used during the development of the system concepts. The introduction section is followed by sections describing two system concepts that produce a waste form in compliance with the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC) and transportation package (TRAMPAC) requirements. This system concept category is referred to as Waste Form 4, ``WIPP and TRAMPAC Acceptable.`` The following two system concepts are under this category: Sort, Treat, and Repackage System (4-BE-2); Volume Reduction and Packaging System (4-BE-4).

  3. Gender Incongruence of Adolescence and Adulthood: Acceptability and Clinical Utility of the World Health Organization’s Proposed ICD-11 Criteria

    PubMed Central

    Beek, Titia F.; Cohen-Kettenis, Peggy T.; Bouman, Walter P.; de Vries, Annelou L. C.; Steensma, Thomas D.; Witcomb, Gemma L.; Arcelus, Jon; Richards, Christina; Elaut, Els; Kreukels, Baudewijntje P. C.

    2016-01-01

    The World Health Organization (WHO) is currently updating the tenth version of their diagnostic tool, the International Classification of Diseases (ICD, WHO, 1992). Changes have been proposed for the diagnosis of Transsexualism (ICD-10) with regard to terminology, placement and content. The aim of this study was to gather the opinions of transgender individuals (and their relatives/partners) and clinicians in the Netherlands, Flanders (Belgium) and the United Kingdom regarding the proposed changes and the clinical applicability and utility of the ICD-11 criteria of ‘Gender Incongruence of Adolescence and Adulthood’ (GIAA). A total of 628 participants were included in the study: 284 from the Netherlands (45.2%), 8 from Flanders (Belgium) (1.3%), and 336 (53.5%) from the UK. Most participants were transgender people (or their partners/relatives) (n = 522), 89 participants were healthcare providers (HCPs) and 17 were both healthcare providers and (partners/relatives of) transgender people. Participants completed an online survey developed for this study. Most participants were in favor of the proposed diagnostic term of ‘Gender Incongruence’ and thought that this was an improvement on the ICD-10 diagnostic term of ‘Transsexualism’. Placement in a separate chapter dealing with Sexual- and Gender-related Health or as a Z-code was preferred by many and only a small number of participants stated that this diagnosis should be excluded from the ICD-11. In the UK, most transgender participants thought there should be a diagnosis related to being trans. However, if it were to be removed from the chapter on “psychiatric disorders”, many transgender respondents indicated that they would prefer it to be removed from the ICD in its entirety. There were no large differences between the responses of the transgender participants (or their partners and relatives) and HCPs. HCPs were generally positive about the GIAA diagnosis; most thought the diagnosis was clearly

  4. CERISE, a French radioprotection code, to assess the radiological impact and acceptance criteria of installations for material handling, and recycling or disposal of very low-level radioactive waste

    SciTech Connect

    Santucci, P.; Guetat, P.

    1993-12-31

    This document describes the code CERISE, Code d`Evaluations Radiologiques Individuelles pour des Situations en Enterprise et dans l`Environnement. This code has been developed in the frame of European studies to establish acceptance criteria of very low-level radioactive waste and materials. This code is written in Fortran and runs on PC. It calculates doses received by the different pathways: external exposure, ingestion, inhalation and skin contamination. Twenty basic scenarios are already elaborated, which have been determined from previous studies. Calculations establish the relation between surface, specific and/or total activities, and doses. Results can be expressed as doses for an average activity unit, or as average activity limits for a set of reference doses (defined for each scenario analyzed). In this last case, the minimal activity values and the corresponding limiting scenarios, are selected and summarized in a final table.

  5. Lunar textural analysis based on WAC-derived kilometer-scale roughness and entropy maps

    NASA Astrophysics Data System (ADS)

    Li, Bo; Wang, XueQiang; Zhang, Jiang; Chen, Jian; Ling, Zongcheng

    2016-06-01

    In general, textures are thought to be some complicated repeated patterns formed by elements, or primitives which are sorted in certain rules. Lunar surfaces record the interactions between its outside environment and itself, thus, based on high-resolution DEM model or image data, there are some topographic features which have different roughness and entropy values or signatures on lunar surfaces. Textures of lunar surfaces can help us to concentrate on typical topographic and photometric variations and reveal the relationships between obvious features (craters, impact basins, sinuous rilles (SRs) and ridges) with resurfacing processes on the Moon. In this paper, the term surface roughness is an expression of the variability of a topographic or photometric surface at kilometer scale, and the term entropy can characterize the variability inherent in a geological and topographic unit and evaluate the uncertainty of predictions made by a given geological process. We use the statistical moments of gray-level histograms in different-sized neighborhoods (e.g., 3, 5, 10, 20, 40 and 80 pixels) to compute the kilometer-scale roughness and entropy values, using the mosaic image from 70°N to 70°S obtained by Lunar Reconnaissance Orbiter (LRO) Wide Angle Camera (WAC). Large roughness and entropy signatures were only found in the larger scale maps, while the smallest 3-pixel scale map had more disorderly and unsystematic textures. According to the entropy values in 10-pixel scale entropy map, we made a frequency curve and categorized lunar surfaces into three types, shadow effects, maria and highlands. A 2D scatter plot of entropy versus roughness values was produced and we found that there were two point clusters corresponding to the highlands and maria, respectively. In the last, we compared the topographic and photometric signatures derived from Lunar Orbiter Laser Altimeter (LOLA) data and WAC mosaic image. On the lunar surfaces, the ridges have obvious multilevel

  6. Physiological Acceptance Criteria for Cold Weather Clothing

    DTIC Science & Technology

    1991-04-01

    subjective feelings of thermal comfort and temperature sensation were examined. Under many conditions that Navy cold weather clothing items are worn, it...is not practical to expect that the optimal level of thermal comfort can be obtained. Allowing for a moderate level of cold sensation and thermal

  7. WIPP waste acceptance criteria and transportation system

    SciTech Connect

    Wu, C.F.; Ward, T.R.; Gregory, P.C.

    1991-12-31

    The Waste Isolation Pilot Plant (WIPP), located near Carlsbad, New Mexico, USA, is a US Department of Energy (DOE) facility designed as a permanent repository for transuranic wastes in the center of a 2,000-foot-thick salt bed situated 2,150 feet underground. Construction of the facility started in 1975, under a congressional act of site selection. In 1979, demonstration of safe disposal at the WIPP was authorized by Public Law 96-164. The operational philosophy and practice at the facility are: (1) start clean -- stay clean, (2) meet or exceed regulatory requirements, and (3) control radiation exposure levels to as low as reasonably achievable (ALARA). Strict safety measures must be taken in the areas of waste preparation, transportation, and facility operation.

  8. Cloud water measurements of glyoxal and methylglyoxal during the Whistler Aerosol and Cloud Study (WACS)

    NASA Astrophysics Data System (ADS)

    Herckes, P.; Ervens, B.; Wang, Y.; Eagar, J.; Leaitch, R.; Macdonald, A.; Sjostedt, S.; Abbatt, J.

    2011-12-01

    Glyoxal and methylglyoxal are produced in high yields from both anthropogenic (aromatics) and biogenic (isoprene) precursors. The role of glyoxal and methylglyoxal in secondary organic aerosol (SOA) formation in the aqueous phase of cloud water and aerosols has received great attention over the past years. In addition, gas phase oxidation and photolysis of these compounds yield radicals and, thus, impact the oxidant budgets. While the reactivity of methylglyoxal and glyoxal in both the gas and aqueous phases is nearly identical, the much higher solubility of glyoxal leads to its more efficient removal in the presence of clouds. Thus, the amount of cloud water (liquid water content, LWC) and cloud processing time will affect the concentration ratios and thus the reaction rates of oxidation processes in the gas and aqueous phase, respectively. The Whistler Aerosol and Cloud Study (WACS) investigated the interactions between clouds and biogenic aerosol in summer 2010 in Whistler (Canada). During this study, cloud samples were collected at two locations, Whistler peak and a mid mountain station Raven's Nest. Cloud samples were extensively chemically characterized including the measurements of glyoxal and methylglyoxal using liquid chromatography coupled to UV and mass spectrometric detection after derivatization. Concentrations were variable on the order of micromoles, accounting for 1% of the dissolved organic matter in clouds. Glyoxal and methylglyoxal concentrations at both locations are predicted by means of model studies using VOC measurements and liquid water contents as input data. These concentrations and their ratios are compared to those in different regions. It will be discussed how cloud liquid water content, cloud processing time and amount and mixture of precursors (emissions) affect these concentration ratios. Finally, the role of different emission scenarios and the presence of clouds for SOA formation and radical budgets will be briefly assessed.

  9. Volatile organic compound production and consumption by microbial plankton communities on the NOAA WACS cruise

    NASA Astrophysics Data System (ADS)

    Giovannoni, S. J.; Halsey, K.; Thrash, J. C.; De Gouw, J. A.; Graus, M.

    2013-12-01

    Information about biological sources and sinks of volatile organic compounds (VOCs) in the ocean surface could result in a better understanding of the underlying causes of variation in air/sea VOC fluxes, and potentially could alter predictions about the impact of climate change on ocean surface ecology and air/sea interactions. The goal of this work was to measure rates of biological production, oxidation and assimilation of volatile organic compounds (VOCs) by microbial plankton communities along the WACS cruise transect from Boston to Bermuda in August 2013. Tangential flow filtration was used to concentrate microbial plankton communities for incubation in environmentally controlled dynamic stripping chambers under simulated ocean surface layer conditions. Gas streams exiting the chambers were monitored in real time with proton transfer reaction mass spectrometry (PTR-MS). In separate experiments aliquots of plankton suspensions were incubated with 14C-methanol, 14C-TMAO, and 14C-pyruvate, and the assimilation of 14C into biomass and the production of 14C-CO2 were measured. Results showed that the highly productive George's Bank plankton community has a high capacity for methanol and trimethylamine oxide (TMAO) oxidation. Biomass was estimated by counting cells. The rate of incorporation of methanol-carbon into biomass was only 21% of the rate of methanol oxidation to CO2. Similar results were observed for TMAO. These experiments also allowed estimates of kinetic constants for both compounds. The half-saturation constants (Ks) for methanol oxidation were similar in natural populations collected at George's Bank and the Sargasso Sea (12.8 and 9.9 μM, respectively). Interestingly, the Ks values for TMAO oxidation were an order of magnitude lower than for methanol in plankton communities sampled from both sites (0.5 and 0.3 μM, respectively). These results provide additional evidence that microbial plankton have a high capacity for oxidation of these low

  10. [Professor Wacław Kuśnierczyk (1908-1997)--Pro Memoria in the century of birthday].

    PubMed

    Brozek, Krzysztof; Kozakiewicz, Jacek; Kierzek, Andrzej

    2009-01-01

    Wacław Kuśnierczyk was born in 1908 in Sniatyń. He received the degree in medicine at Jan Kazimierz University in Lwów in 1932. He did his PhD degree under Professor Zaleski supervision in 1938 at Jan Kazimierz University. At that time he concentrated his scientific activity on research on tuberculosis. In 1953 he obtained the title of second degree specialist in ear, nose and throat diseases. He became a chief of Otolaryngology at Urban Hospital No 4 in Katowice in 1960. Since then this eminent physician was working on tumours located in upper respiratory tract and the possibility of its endoscopic diagnosis at Silesian Academy of Medicine in Katowice. As one of the first he pointed out the negative influence of smoking cigarettes on cancer of larynx. It was Wacław Kuśnierczyk who implemented new priorities for integrated programs in patient care, research, education and cancer prevention. He has published widely in peer reviewed journals and has edited or contributed to many books. He has given many major lectures and is the recipient of numerous prestigious awards for his scientific accomplishments. The achievement of Professor Kuśnierczyk were the valuable source of information for the physicians. In 1997, on the 31st of January he died in Katowice.

  11. References for HNF-SD-WM-TRD-007, ``System specification for the double-shell tank system: HNF-PROs, CFRs, DOE Orders, WACs``

    SciTech Connect

    Shaw, C.P.

    1998-07-30

    HNF-SD-WM-TRD-O07, System Specification for the Double-Shell Tank System, (hereafter referred to as DST Specification), defines the requirements of the double-shell tank system at the Hanford Site for Phase 1 privatization. Many of the sections in this document reference other documents for design guidance and requirements. Referenced documents include Project Hanford Management Contract (PHMC) procedures (HNF-PROS), Codes of Federal Regulation (CFRs), DOE Orders, and Washington Administrative Codes (WACs). This document provides rationale for the selection and inclusion of HNF-PROS, CFRs, DOE Orders and WACs.

  12. How to Create High-Impact Writing Assignments That Enhance Learning and Development and Reinvigorate WAC/WID Programs: What Almost 72,000 Undergraduates Taught Us

    ERIC Educational Resources Information Center

    Anderson, Paul; Anson, Chris M.; Gonyea, Robert M.; Paine, Charles

    2016-01-01

    This article reports on a study that suggests ways that Writing Across the Curriculum/Writing in the Disciplines (WAC/WID) programs can increase the effectiveness of their efforts, including implementation of writingintensive courses, which are one of the Association of American Colleges and Universities' High-Impact Educational Practices. The…

  13. SLUDGE BATCH 7 ACCEPTANCE EVALUATION: RADIONUCLIDE CONCENTRATIONS IN TANK 51 SB7 QUALIFICATION SAMPLE PREPARED AT SRNL

    SciTech Connect

    Pareizs, J.; Hay, M.

    2011-02-22

    Presented in this report are radionuclide concentrations required as part of the program of qualifying Sludge Batch Seven (SB7) for processing in the Defense Waste Processing Facility (DWPF). The SB7 material is currently in Tank 51 being washed and prepared for transfer to Tank 40. The acceptance evaluation needs to be completed prior to the transfer of the material in Tank 51 to Tank 40. The sludge slurry in Tank 40 has already been qualified for DWPF and is currently being processed as SB6. The radionuclide concentrations were measured or estimated in the Tank 51 SB7 Qualification Sample prepared at Savannah River National Laboratory (SRNL). This sample was prepared from the three liter qualification sample of Tank 51 sludge slurry (HTF-51-10-125) received on September 18, 2010. The sample was delivered to SRNL where it was initially characterized in the Shielded Cells. With consultation from the Liquid Waste Organization, the qualification sample was then modified by several washes and decants, which included addition of Pu from H Canyon and sodium nitrite per the Tank Farm corrosion control program. This final slurry now has a composition expected to be similar to that of the slurry in Tank 51 after final preparations have been made for transfer of that slurry to Tank 40. Determining the radionuclide concentrations in this Tank 51 SB7 Qualification Sample is part of the work requested in Technical Task Request (TTR) No. HLW-DWPF-TTR-2010-0031. The radionuclides included in this report are needed for the DWPF Radiological Program Evaluation, the DWPF Waste Acceptance Criteria (TSR/WAC) Evaluation, and the DWPF Solid Waste Characterization Program (TTR Task I.2). Radionuclides required to meet the Waste Acceptance Product Specifications (TTR Task III.2.) will be measured at a later date after the slurry from Tank 51 has been transferred to Tank 40. Then a sample of the as-processed SB7 will be taken and transferred to SRNL for measurement of these radionuclides

  14. Wacław Szybalski's contribution to immunotherapy: HGPRT mutation & HAT selection as first steps to gene therapy and hybrid techniques in mammalian cells.

    PubMed

    Bigda, Jacek J; Koszałka, Patrycja

    2013-08-10

    In this report we describe Wacław Szybalski's fundamental contribution to gene therapy and immunotherapy. His 1962 PNAS paper (Szybalska and Szybalski, 1962) documented the first successful gene repair in mammalian cells. Furthermore, this was also the first report on the HAT selection method used later in many applications. Most importantly, somatic cell fusion and HAT selection were subsequently used to develop monoclonal antibody technology, which contributed significantly to the progress of today's medicine.

  15. Monitoring Reading Behavior: Criteria for Performance.

    ERIC Educational Resources Information Center

    Powell, William R.

    Effective use of the informal reading inventory (IRI) depends upon the criteria used in determining the functional reading levels and more specifically the word recognition criteria employed in describing acceptable limits of oral reading behavior. The author of this paper looks at the diverse sets of criteria commonly used, the problems…

  16. When should conscientious objection be accepted?

    PubMed

    Magelssen, Morten

    2012-01-01

    This paper makes two main claims: first, that the need to protect health professionals' moral integrity is what grounds the right to conscientious objection in health care; and second, that for a given claim of conscientious objection to be acceptable to society, a certain set of criteria should be fulfilled. The importance of moral integrity for individuals and society, including its special role in health care, is advocated. Criteria for evaluating the acceptability of claims to conscientious objection are outlined. The precise content of the criteria is dictated by the two main interests that are at stake in the dilemma of conscientious objection: the patient's interests and the health professional's moral integrity. Alternative criteria proposed by other authors are challenged. The bold claim is made that conscientious objection should be recognised by society as acceptable whenever the five main criteria of the proposed set are met.

  17. Acceptance speech.

    PubMed

    Yusuf, C K

    1994-01-01

    I am proud and honored to accept this award on behalf of the Government of Bangladesh, and the millions of Bangladeshi children saved by oral rehydration solution. The Government of Bangladesh is grateful for this recognition of its commitment to international health and population research and cost-effective health care for all. The Government of Bangladesh has already made remarkable strides forward in the health and population sector, and this was recognized in UNICEF's 1993 "State of the World's Children". The national contraceptive prevalence rate, at 40%, is higher than that of many developed countries. It is appropriate that Bangladesh, where ORS was discovered, has the largest ORS production capacity in the world. It was remarkable that after the devastating cyclone in 1991, the country was able to produce enough ORS to meet the needs and remain self-sufficient. Similarly, Bangladesh has one of the most effective, flexible and efficient control of diarrheal disease and epidemic response program in the world. Through the country, doctors have been trained in diarrheal disease management, and stores of ORS are maintained ready for any outbreak. Despite grim predictions after the 1991 cyclone and the 1993 floods, relatively few people died from diarrheal disease. This is indicative of the strength of the national program. I want to take this opportunity to acknowledge the contribution of ICDDR, B and the important role it plays in supporting the Government's efforts in the health and population sector. The partnership between the Government of Bangladesh and ICDDR, B has already borne great fruit, and I hope and believe that it will continue to do so for many years in the future. Thank you.

  18. The influence of the oscillation angle and the neck anteversion of the prosthesis on the cup safe-zone that fulfills the criteria for range of motion in total hip replacements. The required oscillation angle for an acceptable cup safe-zone.

    PubMed

    Yoshimine, Fumihiro

    2005-01-01

    A normal hip joint has more than 120 degrees flexion. The reduced range of motion (ROM) of total hip arthroplast leads to frequent prosthetic impingement, subluxation and dislocation. Prosthetic impingement may be more serious for metal-on-metal and ceramic-on-ceramic total hip prosthesis (THP). A larger oscillation angle of THP (OsA) and proper cup and neck positions make a larger theoretical ROM of a patient's artificial hip joint. But what OsA is required and what range of cup positions is kinetically accepted are not clearly understood. A ROM of more than 120 degrees flexion, 45 degrees internal-rotation at 90 degrees flexion, 30 degrees extension and 40 degrees external-rotation was defined as severe criteria for an acceptable ROM. Theoretical cup safe-zones were created that fulfill the severe criteria of ROM for (OsA=110 degrees , 120 degrees , 135 degrees ) by the mathematical formulas. The size of the cup safe-zone mainly depends on the size of the OsA. There is no cup safe-zone for 110 degrees OsA, an extremely small safe-zone for 120 degrees OsA and an acceptable safe-zone for 135 degrees OsA. Each THP has its own OsA, because OsA is the function of head and neck diameter and cup design. More than 135 degrees OsA enlarges the safe-zone of the prosthetic position, so it extends the acceptable range of error that surgeons cannot avoid completely. However, few THPs with more than 135 degrees OsA are currently clinically available. Both surgeons and manufacturers must realize that OsA is as essential as cup and neck orientations for ROM.

  19. 48 CFR 2811.103 - Market acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Market acceptance. 2811.103... Planning DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 2811.103 Market acceptance... offerors to demonstrate that the items offered meet the criteria set forth in FAR 11.103(a)....

  20. International Conference on Harmonisation; guidance on Q4B Evaluation and Recommendation of Pharmacopoeial Texts for use in the International Conference on Harmonisation Regions; Annex 4C on Microbiological Examination of Nonsterile Products: Acceptance Criteria for Pharmaceutical Preparations and Substances for Pharmaceutical Use General Chapter; availability. Notice.

    PubMed

    2009-04-08

    The Food and Drug Administration (FDA) is announcing the availability of a guidance entitled "Q4B Evaluation and Recommendation of Pharmacopoeial Texts for Use in the ICH Regions; Annex 4C: Microbiological Examination of Nonsterile Products: Acceptance Criteria for Pharmaceutical Preparations and Substances for Pharmaceutical Use General Chapter." The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). The guidance provides the results of the ICH Q4B evaluation of the Microbiological Examination of Nonsterile Products: Acceptance Criteria for Pharmaceutical Preparations and Substances for Pharmaceutical Use General Chapter harmonized text from each of the three pharmacopoeias (United States, European, and Japanese) represented by the Pharmacopoeial Discussion Group (PDG). The guidance conveys recognition of the three pharmacopoeial methods by the three ICH regulatory regions and provides specific information regarding the recognition. The guidance is intended to recognize the interchangeability between the local regional pharmacopoeias, thus avoiding redundant testing in favor of a common testing strategy in each regulatory region. In the Federal Register of February 21, 2008 (73 FR 9575), FDA made available a guidance on the Q4B process entitled "Q4B Evaluation and Recommendation of Pharmacopoeial Texts for Use in the ICH Regions."

  1. Crew Transportation Technical Standards and Design Evaluation Criteria

    NASA Technical Reports Server (NTRS)

    Lueders, Kathryn L.; Thomas, Rayelle E. (Compiler)

    2015-01-01

    Crew Transportation Technical Standards and Design Evaluation Criteria contains descriptions of technical, safety, and crew health medical processes and specifications, and the criteria which will be used to evaluate the acceptability of the Commercial Providers' proposed processes and specifications.

  2. 16 CFR 1031.12 - Membership criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Membership criteria. 1031.12 Section 1031.12... EMPLOYEE INVOLVEMENT IN VOLUNTARY STANDARDS ACTIVITIES Employee Involvement § 1031.12 Membership criteria..., the Commission's Voluntary Standards Coordinator may accept such membership. (c) Commission...

  3. 16 CFR 1031.12 - Membership criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Membership criteria. 1031.12 Section 1031.12... EMPLOYEE INVOLVEMENT IN VOLUNTARY STANDARDS ACTIVITIES Employee Involvement § 1031.12 Membership criteria..., the Commission's Voluntary Standards Coordinator may accept such membership. (c) Commission...

  4. 16 CFR 1031.12 - Membership criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Membership criteria. 1031.12 Section 1031.12... EMPLOYEE INVOLVEMENT IN VOLUNTARY STANDARDS ACTIVITIES Employee Involvement § 1031.12 Membership criteria..., the Commission's Voluntary Standards Coordinator may accept such membership. (c) Commission...

  5. 16 CFR 1031.12 - Membership criteria.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Membership criteria. 1031.12 Section 1031.12... EMPLOYEE INVOLVEMENT IN VOLUNTARY STANDARDS ACTIVITIES Employee Involvement § 1031.12 Membership criteria..., the Commission's Voluntary Standards Coordinator may accept such membership. (c) Commission...

  6. 16 CFR 1031.12 - Membership criteria.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Membership criteria. 1031.12 Section 1031.12... EMPLOYEE INVOLVEMENT IN VOLUNTARY STANDARDS ACTIVITIES Employee Involvement § 1031.12 Membership criteria..., the Commission's Voluntary Standards Coordinator may accept such membership. (c) Commission...

  7. Common Risk Criteria for National Test Ranges

    DTIC Science & Technology

    2010-12-01

    operations, excluding aviation operations. 15. SUBJECT TERMS Range Safety Group; debris injury thresholds; debris hazard thresholds; acceptable...excluding aviation operations. 15. SUBJECT TERMS Range Safety Group; debris injury thresholds; debris hazard thresholds; acceptable risk criteria 16...uncertainty applies to all hazards, not just debris . h. Modifying the description of catastrophic risk in Chapter 4 and Chapter 7 of the Supplement

  8. 46 CFR 164.120-7 - Acceptance criteria.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... inspections and tests required by this section, including weathering of samples, are the responsibility of the... of this subpart) and must be tested and meet the requirements of weathering and post-weathering mechanical testing as shown in Table 164.120-7 of this section. Samples for the weathering must be...

  9. DWPF COAL CARBON WASTE ACCEPTANCE CRITERIA LIMIT EVALUATION

    SciTech Connect

    Lambert, D.; Choi, A.

    2010-06-21

    A paper study was completed to assess the impact on the Defense Waste Processing Facility (DWPF)'s Chemical Processing Cell (CPC) acid addition and melter off-gas flammability control strategy in processing Sludge Batch 10 (SB10) to SB13 with an added Fluidized Bed Steam Reformer (FBSR) stream and two Salt Waste Processing Facility (SWPF) products (Strip Effluent and Actinide Removal Stream). In all of the cases that were modeled, an acid mix using formic acid and nitric acid could be achieved that would produce a predicted Reducing/Oxidizing (REDOX) Ratio of 0.20 Fe{sup +2}/{Sigma}Fe. There was sufficient formic acid in these combinations to reduce both the manganese and mercury present. Reduction of manganese and mercury are both necessary during Sludge Receipt and Adjustment Tank (SRAT) processing, however, other reducing agents such as coal and oxalate are not effective in this reduction. The next phase in this study will be experimental testing with SB10, FBSR, and both SWPF simulants to validate the assumptions in this paper study and determine whether there are any issues in processing these streams simultaneously. The paper study also evaluated a series of abnormal processing conditions to determine whether potential abnormal conditions in FBSR, SWPF or DWPF would produce melter feed that was too oxidizing or too reducing. In most of the cases that were modeled with one parameter at its extreme, an acid mix using formic acid and nitric acid could be achieved that would produce a predicted REDOX of 0.09-0.30 (target 0.20). However, when a run was completed with both high coal and oxalate, with minimum formic acid to reduce mercury and manganese, the final REDOX was predicted to be 0.49 with sludge and FBSR product and 0.47 with sludge, FBSR product and both SWPF products which exceeds the upper REDOX limit.

  10. 44 CFR 362.3 - Criteria for determining acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... gift of services is offered to the Administrator for the benefit of the National Earthquake Hazards... objectives of the National Earthquake Hazards Reduction Program, as defined in 42 U.S.C. 7702. (b) All...

  11. 44 CFR 362.3 - Criteria for determining acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... gift of services is offered to the Administrator for the benefit of the National Earthquake Hazards... objectives of the National Earthquake Hazards Reduction Program, as defined in 42 U.S.C. 7702. (b) All...

  12. 44 CFR 362.3 - Criteria for determining acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... gift of services is offered to the Administrator for the benefit of the National Earthquake Hazards... objectives of the National Earthquake Hazards Reduction Program, as defined in 42 U.S.C. 7702. (b) All...

  13. 44 CFR 362.3 - Criteria for determining acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... gift of services is offered to the Administrator for the benefit of the National Earthquake Hazards... objectives of the National Earthquake Hazards Reduction Program, as defined in 42 U.S.C. 7702. (b) All...

  14. 44 CFR 362.3 - Criteria for determining acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... gift of services is offered to the Administrator for the benefit of the National Earthquake Hazards... objectives of the National Earthquake Hazards Reduction Program, as defined in 42 U.S.C. 7702. (b) All...

  15. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the...

  16. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the...

  17. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the...

  18. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the liquid explosive; or (3)...

  19. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the...

  20. Design, Test, and Acceptance Criteria for Helicopter Transparent Enclosures

    DTIC Science & Technology

    1978-11-01

    Visibility Data From Ballistic Tests . . .*. . 212 37 Dispersion of Penetrations in Witness Sheet . 219 38 Foam Penetration Data . . . . . . . . . o 224 39...light scattered and therefore lost in passage through the material. To provide a frame of reference, a material with 30% haze would be considered...polycarbonate materials were superior to glass in resisting impinge- ment abrasion; apparently due to ductility of the coating which minimized spallation

  1. 7 CFR 42.133 - Portion of production acceptance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Section 42.133 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS STANDARDS FOR CONDITION OF FOOD CONTAINERS On-Line Sampling and Inspection...

  2. 7 CFR 42.107 - Lot acceptance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS STANDARDS FOR CONDITION OF FOOD CONTAINERS Procedures for Stationary Lot Sampling and...

  3. Acceptance criteria for reactor coolant pumps and valves

    SciTech Connect

    Gupta, N.K.; Miller, R.F.; Sindelar, R.L.

    1993-05-01

    Each of the six primary coolant loop systems of the Savannah River Site (SRS) production reactors contains one reactor coolant pump, one PUMP suction side motor operated valve, and other smaller valves. The pumps me double suction, double volute, and radially split type pumps. The valves are different size shutoff and control valves rated from ANSI B16.5 construction class 150 to class 300. The reactor coolant system components, also known as the process water system (PWS), are classified as nuclear Safety Class I components. These components were constructed in the 1950`s in accordance with the then prevailing industry practices. No uniform construction codes were used for design and analysis of these components. However, no pressure boundary failures or bolting failures have ever been recorded throughout their operating history. Over the years, the in-service inspection (ISI) was limited to visual inspection of the pressure boundaries, and surface and volumetric examination of the pressure retaining bolts. Efforts are now underway to implement ISI requirements similar to the ASME Section XI requirements for pumps and valves. This report discusses the new ISI requirements which also call for volumetric examination of the pump casing and valve body welds.

  4. 7 CFR 42.133 - Portion of production acceptance criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Section 42.133 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS STANDARDS FOR CONDITION OF FOOD CONTAINERS On-Line Sampling and Inspection...

  5. 7 CFR 42.107 - Lot acceptance criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS STANDARDS FOR CONDITION OF FOOD CONTAINERS Procedures for Stationary Lot Sampling and...

  6. 46 CFR 164.120-7 - Acceptance criteria.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ASTM D 695 241 MPa (35,000 ln/in2). (v) Fire retardant MSC Circ. 1006 Pass. (vi) Water absorption, 24... hours in boiling distilled water as per ASTM D 570 paragraph 7.5. The specimens must then be cooled in water at 23 °C and tested wet at standard conditions immediately after removal from the water.):...

  7. Synthesis, biological evaluation, WAC and NMR studies of S-galactosides and non-carbohydrate ligands of cholera toxin based on polyhydroxyalkylfuroate moieties.

    PubMed

    Ramos-Soriano, Javier; Niss, Ulf; Angulo, Jesús; Angulo, Manuel; Moreno-Vargas, Antonio J; Carmona, Ana T; Ohlson, Sten; Robina, Inmaculada

    2013-12-23

    The synthesis of several non-carbohydrate ligands of cholera toxin based on polyhydroxyalkylfuroate moieties is reported. Some of them have been linked to D-galactose through a stable and well-tolerated S-glycosidic bond. They represent a novel type of non-hydrolyzable bidentate ligand featuring galactose and polyhydroxyalkylfuroic esters as pharmacophoric residues, thus mimicking the GM1 ganglioside. The affinity of the new compounds towards cholera toxin was measured by weak affinity chromatography (WAC). The interaction of the best candidates with this toxin was also studied by saturation transfer difference NMR experiments, which allowed identification of the binding epitopes of the ligands interacting with the protein. Interestingly, the highest affinity was shown by non-carbohydrate mimics based on a polyhydroxyalkylfuroic ester structure.

  8. SLUDGE BATCH 6 ACCEPTANCE EVALUATION: RADIONUCLIDE CONCENTRATIONS IN TANK 51 SB6 QUALIFICATION SAMPLE PREPARED AT SRNL

    SciTech Connect

    Bannochie, C.; Bibler, N.; Diprete, D.

    2010-05-21

    Presented in this report are radionuclide concentrations required as part of the program of qualifying Sludge Batch Six (SB6) for processing in the Defense Waste Processing Facility (DWPF). The SB6 material is currently in Tank 51 being washed and prepared for transfer to Tank 40. The acceptance evaluation needs to be completed prior to the transfer of the material in Tank 51 to Tank 40. The sludge slurry in Tank 40 has already been qualified for DWPF and is currently being processed as SB5. The radionuclide concentrations were measured or estimated in the Tank 51 SB6 Qualification Sample prepared at Savannah River National Laboratory (SRNL). This sample was prepared from the three liter sample of Tank 51 sludge slurry (HTF-51-09-110) taken on October 8, 2009. The sample was delivered to SRNL where it was initially characterized in the Shielded Cells. Under the direction of the Liquid Waste Organization it was then modified by eight washes, nine decants, an addition of Pu from Canyon Tank 16.3, and an addition of NaNO{sub 2}. This final slurry now has a composition expected to be similar to that of the slurry in Tank 51 after final preparations have been made for transfer of that slurry to Tank 40. Determining the radionuclide concentrations in this Tank 51 SB6 Qualification Sample is part of the work requested in Technical Task Request (TTR) No. HLW-DWPF-TTR-2009-0014. The work with this qualification sample is covered by a Task Technical and Quality Assurance Plan and an Analytical Study Plan. The radionuclides included in this report are needed for the DWPF Radiological Program Evaluation, the DWPF Waste Acceptance Criteria (TSR/WAC) Evaluation, and the DWPF Solid Waste Characterization Program (TTR Task I.2). Radionuclides required to meet the Waste Acceptance Product Specifications (TTR Task II.2.) will be measured at a later date after the slurry from Tank 51 has been transferred to Tank 40. Then a sample of the as-processed SB6 will be taken and transferred

  9. W-087 Acceptance test procedure. Revision 1

    SciTech Connect

    Joshi, A.W.

    1997-06-10

    This Acceptance Test Procedure/Operational Test Procedure (ATP/OTP) has been prepared to demonstrate that the Electrical/Instrumentation and Mechanical systems function as required by project criteria and to verify proper operation of the integrated system including the interlocks.

  10. Offer/Acceptance Ratio.

    ERIC Educational Resources Information Center

    Collins, Mimi

    1997-01-01

    Explores how human resource professionals, with above average offer/acceptance ratios, streamline their recruitment efforts. Profiles company strategies with internships, internal promotion, cooperative education programs, and how to get candidates to accept offers. Also discusses how to use the offer/acceptance ratio as a measure of program…

  11. An evaluation of EPA`s proposed national sediment quality criteria applied to Puget Sound

    SciTech Connect

    Gries, T.H.

    1994-12-31

    The US Environmental Protection Agency (EPA) proposed national marine and freshwater sediment quality criteria for five chemicals of concern: acenaphthene, dieldrin, endrin, fluoranthene and phenanthrene. The criteria values EPA developed were based on an equilibrium partitioning approach and are normalized to the organic carbon of the sediment. The Department of Ecology compared the proposed national marine sediment criteria for the three PAH compounds to Washington`s Sediment Management Standards (173-204 WAC), most of which were derived using the empirical ``Apparent Effects Threshold`` approach. The number of stations in Puget Sound exceeding the State`s chemical Sediment Quality Standards (SQS) was 1.7--8.1 times greater those exceeding the proposed criteria. It also appeared from early results that the latter were less sensitive predictors of stations known to exhibit significant adverse biological effects. Thus, the proposed criteria may not be as effective as the SQS when used as a regulatory tool to screen for biological effects in Puget Sound. These and other findings will be presented which generally support the EPA Science Advisory Board recommendation to use proposed national criteria in conjunction with other chemical and biological sediment quality indicators to make regulatory decisions.

  12. Recommendations for Glass Durability Test Criteria

    SciTech Connect

    Strachan, D.M.

    1999-01-28

    The objective of this short report is to define a set of activities that should lead to a specification for a test that can be used as one of the acceptance criteria and as an indicator of acceptable long-term behavior in contact with water. Since the glass composition is not yet defined and is likely to change as the composition of the waste changes, a strategy for developing criteria for what is acceptable involves a series of tests and modeling activities. The results of these activities lead to a criterion for an acceptable product and the data that are needed to reliably determine the behavior of the glass in the storage environment.

  13. LIMS user acceptance testing.

    PubMed

    Klein, Corbett S

    2003-01-01

    Laboratory Information Management Systems (LIMS) play a key role in the pharmaceutical industry. Thorough and accurate validation of such systems is critical and is a regulatory requirement. LIMS user acceptance testing is one aspect of this testing and enables the user to make a decision to accept or reject implementation of the system. This paper discusses key elements in facilitating the development and execution of a LIMS User Acceptance Test Plan (UATP).

  14. On Maximum FODO Acceptance

    SciTech Connect

    Batygin, Yuri Konstantinovich

    2014-12-24

    This note illustrates maximum acceptance of FODO quadrupole focusing channel. Acceptance is the largest Floquet ellipse of a matched beam: A = $\\frac{a^2}{β}$$_{max}$ where a is the aperture of the channel and βmax is the largest value of beta-function in the channel. If aperture of the channel is restricted by a circle of radius a, the s-s acceptance is available for particles oscillating at median plane, y=0. Particles outside median plane will occupy smaller phase space area. In x-y plane, cross section of the accepted beam has a shape of ellipse with truncated boundaries.

  15. Comparison of diagnostic criteria for polycythaemia vera.

    PubMed

    Turkington, Richard C; Arnold, E Claire; Percy, Melanie J; Ranaghan, Lisa A; Cuthbert, Robert J G; McMullin, Mary F

    2007-04-01

    Three sets of diagnostic criteria for polycythaemia vera (PV); the Polycythaemia Vera Study Group (PVSG) criteria (1975), the British Committee for Standards in Haematology (BCSH) criteria (1996) and the World Health Organisation (WHO) criteria (2001) have been described. We compared the ability of each set of criteria to accurately diagnose PV and differentiate it from secondary, apparent and idiopathic erythrocytosis. A cohort was drawn from a clinical database of erythrocytosis patients currently attending the Belfast City Hospital and the relevant information from the time of diagnosis for each patient was assessed according to each set of criteria, with the BCSH criteria used as a comparator. Sufficient data was available on 71 patients: 46 PV, 8 idiopathic, 8 apparent and 9 secondary erythrocytosis. The BCSH criteria classified 34 of 46 patients (73.9%) as PV and the WHO criteria had a sensitivity and specificity of 100% for classifying PV. For idiopathic and apparent erythrocytosis, the specificity of the WHO criteria, compared to the BCSH criteria, declined to 66.7 and 87.5%, respectively. The PVSG criteria were limited by the unavailability of required data for some patients resulting in a sensitivity and specificity of 50% for PV and specificity of 100% for all other groups. The Janus kinase 2 (JAK2) V617F mutation was present in 34 (85.3%) PV, 2 (50%) IE, 1 (50%) apparent and no secondary erythrocytosis cases. We concluded that the BCSH criteria were the most accurate diagnostic criteria for PV as they had an acceptable level of sensitivity and could differentiate between PV and other erythrocytoses.

  16. IHE material qualification tests description and criteria

    SciTech Connect

    Slape, R J

    1984-06-01

    This report describes the qualification tests presently being used at Pantex Plant, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory that are required by the Department of Energy prior to the approval for an explosive as an Insensitive High Explosive (IHE) material. The acceptance criteria of each test for IHE qualification is also discussed. 5 references, 10 figures.

  17. Acceptance Probability (P a) Analysis for Process Validation Lifecycle Stages.

    PubMed

    Alsmeyer, Daniel; Pazhayattil, Ajay; Chen, Shu; Munaretto, Francesco; Hye, Maksuda; Sanghvi, Pradeep

    2016-04-01

    This paper introduces an innovative statistical approach towards understanding how variation impacts the acceptance criteria of quality attributes. Because of more complex stage-wise acceptance criteria, traditional process capability measures are inadequate for general application in the pharmaceutical industry. The probability of acceptance concept provides a clear measure, derived from specific acceptance criteria for each quality attribute. In line with the 2011 FDA Guidance, this approach systematically evaluates data and scientifically establishes evidence that a process is capable of consistently delivering quality product. The probability of acceptance provides a direct and readily understandable indication of product risk. As with traditional capability indices, the acceptance probability approach assumes that underlying data distributions are normal. The computational solutions for dosage uniformity and dissolution acceptance criteria are readily applicable. For dosage uniformity, the expected AV range may be determined using the s lo and s hi values along with the worst case estimates of the mean. This approach permits a risk-based assessment of future batch performance of the critical quality attributes. The concept is also readily applicable to sterile/non sterile liquid dose products. Quality attributes such as deliverable volume and assay per spray have stage-wise acceptance that can be converted into an acceptance probability. Accepted statistical guidelines indicate processes with C pk > 1.33 as performing well within statistical control and those with C pk < 1.0 as "incapable" (1). A C pk > 1.33 is associated with a centered process that will statistically produce less than 63 defective units per million. This is equivalent to an acceptance probability of >99.99%.

  18. Newbery Medal Acceptance.

    ERIC Educational Resources Information Center

    Freedman, Russell

    1988-01-01

    Presents the Newbery Medal acceptance speech of Russell Freedman, writer of children's nonfiction. Discusses the place of nonfiction in the world of children's literature, the evolution of children's biographies, and the author's work on "Lincoln." (ARH)

  19. Acceptance Priority Ranking & Annual Capacity Report

    SciTech Connect

    2004-07-31

    The Nuclear Waste Policy Act of 1982, as amended (the Act), assigns the Federal Government the responsibility for the disposal of spent nuclear fuel and high-level waste. Section 302(a) of the Act authorizes the Secretary to enter into contracts with the owners and generators of commercial spent nuclear fuel and/or high-level waste. The Standard Contract for Disposal of Spent Nuclear Fuel and/or High-Level Radioactive Waste (Standard Contract) established the contractual mechanism for the Department's acceptance and disposal of spent nuclear fuel and high-level waste. It includes the requirements and operational responsibilities of the parties to the Standard Contract in the areas of administrative matters, fees, terms of payment, waste acceptance criteria, and waste acceptance procedures. The Standard Contract provides for the acquisition of title to the spent nuclear fuel and/or high-level waste by the Department, its transportation to Federal facilities, and its subsequent disposal.

  20. SLUDGE BATCH 5 ACCEPTANCE EVALUATION RADIONUCLIDE CONCENTRATIONS IN TANK 51 SB5 QUALIFICATION SAMPLE PREPARED AT SRNL

    SciTech Connect

    Bannochie, C; Ned Bibler, N; David Diprete, D

    2008-07-28

    Presented in this report are radionuclide concentrations required as part of the program of qualifying Sludge Batch Five (SB5) for processing in the Defense Waste Processing Facility (DWPF). Part of this SB5 material is currently in Tank 51 being washed and prepared for transfer to Tank 40. The acceptance evaluation needs to be completed prior to the transfer of the material in Tank 51 to Tank 40 to complete the formation of SB5. The sludge slurry in Tank 40 has already been qualified for DWPF and is currently being processed as SB4. The radionuclide concentrations were measured or estimated in the Tank 51 SB5 Qualification Sample prepared at Savannah River National Laboratory (SRNL). This sample was prepared from the three liter sample of Tank 51 sludge slurry taken on March 21, 2008. The sample was delivered to SRNL where it was initially characterized in the Shielded Cells. Under direction of the Liquid Waste Organization it was then modified by five washes, six decants, an addition of Pu/Be from Canyon Tank 16.4, and an addition of NaNO2. This final slurry now has a composition expected to be similar to that of the slurry in Tank 51 after final preparations have been made for transfer of that slurry to Ta Determining the radionuclide concentrations in this Tank 51 SB5 Qualification Sample is part of the work requested in Technical Task Request (TTR) No. HLW-DWPF-TTR-2008-0010. The work with this qualification sample is covered by a Task Technical and Quality Assurance Plan and an Analytical Study Plan. The radionuclides included in this report are needed for the DWPF Radiological Program Evaluation, the DWPF Waste Acceptance Criteria (TSR/WAC) Evaluation, and the DWPF Solid Waste Characterization Program (TTR Task 2). Radionuclides required to meet the Waste Acceptance Product Specifications (TTR Task 5) will be measured at a later date after the slurry from Tank 51 has been transferred to Tank 40. Then a sample of the as-processed SB5 will be taken and

  1. Accepting space radiation risks.

    PubMed

    Schimmerling, Walter

    2010-08-01

    The human exploration of space inevitably involves exposure to radiation. Associated with this exposure are multiple risks, i.e., probabilities that certain aspects of an astronaut's health or performance will be degraded. The management of these risks requires that such probabilities be accurately predicted, that the actual exposures be verified, and that comprehensive records be maintained. Implicit in these actions is the fact that, at some point, a decision has been made to accept a certain level of risk. This paper examines ethical and practical considerations involved in arriving at a determination that risks are acceptable, roles that the parties involved may play, and obligations arising out of reliance on the informed consent paradigm seen as the basis for ethical radiation risk acceptance in space.

  2. Why was Relativity Accepted?

    NASA Astrophysics Data System (ADS)

    Brush, S. G.

    Historians of science have published many studies of the reception of Einstein's special and general theories of relativity. Based on a review of these studies, and my own research on the role of the light-bending prediction in the reception of general relativity, I discuss the role of three kinds of reasons for accepting relativity (1) empirical predictions and explanations; (2) social-psychological factors; and (3) aesthetic-mathematical factors. According to the historical studies, acceptance was a three-stage process. First, a few leading scientists adopted the special theory for aesthetic-mathematical reasons. In the second stage, their enthusiastic advocacy persuaded other scientists to work on the theory and apply it to problems currently of interest in atomic physics. The special theory was accepted by many German physicists by 1910 and had begun to attract some interest in other countries. In the third stage, the confirmation of Einstein's light-bending prediction attracted much public attention and forced all physicists to take the general theory of relativity seriously. In addition to light-bending, the explanation of the advance of Mercury's perihelion was considered strong evidence by theoretical physicists. The American astronomers who conducted successful tests of general relativity became defenders of the theory. There is little evidence that relativity was `socially constructed' but its initial acceptance was facilitated by the prestige and resources of its advocates.

  3. UGV acceptance testing

    NASA Astrophysics Data System (ADS)

    Kramer, Jeffrey A.; Murphy, Robin R.

    2006-05-01

    With over 100 models of unmanned vehicles now available for military and civilian safety, security or rescue applications, it is important to for agencies to establish acceptance testing. However, there appears to be no general guidelines for what constitutes a reasonable acceptance test. This paper describes i) a preliminary method for acceptance testing by a customer of the mechanical and electrical components of an unmanned ground vehicle system, ii) how it has been applied to a man-packable micro-robot, and iii) discusses the value of testing both to ensure that the customer has a workable system and to improve design. The test method automated the operation of the robot to repeatedly exercise all aspects and combinations of components on the robot for 6 hours. The acceptance testing process uncovered many failures consistent with those shown to occur in the field, showing that testing by the user does predict failures. The process also demonstrated that the testing by the manufacturer can provide important design data that can be used to identify, diagnose, and prevent long-term problems. Also, the structured testing environment showed that sensor systems can be used to predict errors and changes in performance, as well as uncovering unmodeled behavior in subsystems.

  4. Approaches to acceptable risk

    SciTech Connect

    Whipple, C.

    1997-04-30

    Several alternative approaches to address the question {open_quotes}How safe is safe enough?{close_quotes} are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made.

  5. Getting waste ready for shipment to the WIPP: integration of characterization and certification activities

    SciTech Connect

    Sinkule, B.; Knudsen, K.; Rogers, P.

    1996-06-01

    The Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC) serve as the primary directive for assuring the safe handling, transportation, and disposal of transuranic (TRU) waste generated at Department of Energy (DOE) sites. The WIPP WAC address fulfillment of WIPP`s operational safety and performance assessment criteria, compliance with Resource Conservation and Recovery Act (RCRA) requirements, and preparation of waste packages that meet all transportation criteria. At individual generator sites, preparation of transuranic waste for final disposal at WIPP includes characterizing the waste to meet the requirements of the transuranic Waste Characterization Quality Assurance Program Plan (QAPP) and certifying waste containers to meet the WIPP WAC and the Transuranic Package Transporter-II Authorized Methods for Payload Control (TRAMPAC). This paper compares the quality assurance and quality control requirements specified in the WIPP WAC, QAPP, and TRAMPAC and discusses the potential to consolidate activities to comply with the TRU waste characterization and certification program requirements.

  6. Characterization Results for the March 2016 H-Tank Farm 2H Evaporator Overhead Samples

    SciTech Connect

    Nicholson, J. C.

    2016-05-09

    This report contains the radioanalytical results of the 2H evaporator overhead sample received at SRNL on March 16, 2016. Specifically, concentrations of 137Cs, 90Sr, and 129I are reported and compared to the corresponding Waste Acceptance Criteria (WAC) limits of the Effluent Treatment Project (ETP) Waste Water Collection Tank (WWCT) (rev. 6). All of the radionuclide concentrations in the sample were found to be in compliance with the ETP WAC limits.

  7. Characterization Results For The 2013 HTF 3H Evaporator Overhead Samples

    SciTech Connect

    Washington, A. L. II

    2013-12-04

    This report tabulates the radiochemical analysis of the 3H evaporator overhead sample for {sup 137}Cs, {sup 90}Sr, and {sup 129}I to meet the requirements in the Effluent Treatment Project (ETP) Waste Acceptance Criteria (WAC) (rev. 6). This report identifies the sample receipt date, preparation method, and analysis performed in the accumulation of the listed values. All data was found to be within the ETP WAC (rev. 6) specification for the Waste Water Collection Tanks (WWCT).

  8. Characterization results for the October 2015-Tank for farm 3H evaporator overhead examples

    SciTech Connect

    Nicholson, J. C.

    2016-01-28

    This report contains the radioanalytical results of the 3H evaporator overhead sample received at SRNL on October 13, 2015. Specifically, concentrations of 137Cs, 90Sr, and 129I are reported and compared to the corresponding Waste Acceptance Criteria (WAC) limits of the Effluent Treatment Project (ETP) Waste Water Collection Tank (WWCT) (rev. 6). All of the radionuclide concentrations in the sample were found to be in compliance with the ETP WAC limits.

  9. Defining Language Ability: The Criteria for Criteria.

    ERIC Educational Resources Information Center

    Brindley, Geoff

    Problems associated with criterion-referenced language testing are discussed in the context of both standardized proficiency testing and classroom assessment. First, different interpretations of criterion-referencing are examined. A range of approaches for defining criteria and performance levels in second language assessment are outlined, and…

  10. Acceptability of human risk.

    PubMed

    Kasperson, R E

    1983-10-01

    This paper has three objectives: to explore the nature of the problem implicit in the term "risk acceptability," to examine the possible contributions of scientific information to risk standard-setting, and to argue that societal response is best guided by considerations of process rather than formal methods of analysis. Most technological risks are not accepted but are imposed. There is also little reason to expect consensus among individuals on their tolerance of risk. Moreover, debates about risk levels are often at base debates over the adequacy of the institutions which manage the risks. Scientific information can contribute three broad types of analyses to risk-setting deliberations: contextual analysis, equity assessment, and public preference analysis. More effective risk-setting decisions will involve attention to the process used, particularly in regard to the requirements of procedural justice and democratic responsibility.

  11. Acceptability of human risk.

    PubMed Central

    Kasperson, R E

    1983-01-01

    This paper has three objectives: to explore the nature of the problem implicit in the term "risk acceptability," to examine the possible contributions of scientific information to risk standard-setting, and to argue that societal response is best guided by considerations of process rather than formal methods of analysis. Most technological risks are not accepted but are imposed. There is also little reason to expect consensus among individuals on their tolerance of risk. Moreover, debates about risk levels are often at base debates over the adequacy of the institutions which manage the risks. Scientific information can contribute three broad types of analyses to risk-setting deliberations: contextual analysis, equity assessment, and public preference analysis. More effective risk-setting decisions will involve attention to the process used, particularly in regard to the requirements of procedural justice and democratic responsibility. PMID:6418541

  12. Acceptance Test Plan.

    DTIC Science & Technology

    2014-09-26

    7 RD-Ai507 154 CCEPTANCE TEST PLN(U) WESTINGHOUSE DEFENSE ND i/i ELECTRO ICS CENTER BALTIMORE MD DEVELOPMENT AND OPERATIONS DIY D C KRRiJS 28 JUN...Ln ACCEPTANCE TEST PLAN FOR SPECIAL RELIABILITY TESTS FOR BROADBAND MICROWAVE AMPLIFIER PANEL David C. Kraus, Reliability Engineer WESTINGHOUSE ...ORGANIZATION b. OFFICE SYMBOL 7g& NAME OF MONITORING ORGANIZATION tIf appdeg ble) WESTINGHOUSE ELECTRIC CORP. - NAVAL RESEARCH LABORATORY e. AOORES$ (Ci7t

  13. Acceptance test report for the safety class shutdown system

    SciTech Connect

    Zuroff, W.F.

    1996-10-17

    This document provides the Acceptance Test Report for the successful testing of the Safety Shutdown Circuit. The test was done in accordance with the requirements that were defined in WHC-SD-WM-SCH-003, Interim Stabilization Safety Class Trip Circuit CGI Dedication Criteria. The actual test procedure document was contained in WHC-SD-WM-ATP-185, Acceptance Test Procedure for the Safety Class Shutdown System.

  14. Age and Acceptance of Euthanasia.

    ERIC Educational Resources Information Center

    Ward, Russell A.

    1980-01-01

    Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

  15. [The role of Wacława Moszyński in the development of the Polish School of Machine and Mechanism Theory].

    PubMed

    Kisiel, Janusz; Pylak, Konrad; Schabowska, Krystyna

    2005-01-01

    The end of the 19th and the first half of the 20th centuries saw the emergence and intensive development of many disciplines in the technical sciences, and the laying of a groundwork for those disciplines in their current form. In Poland, a country deprived of independent statehood until 1918, this was additionally a period when native research centres and scientific schools came into being, and when Polish-language specialist literatures emerged as well. Many of the eminent personages whose activities contributed to those trends have already been described in biographical notes and articles. There are still, however, not enough studies dealing with the substance of their scientific and professional achievements. One of the personages in question was Wacława Moszyński, professor of the Warsaw Technical University, a pioneer of machine construction and mechanism theory, author of the first academic textbook in the field to be published in Poland. The current article discusses Moszyński's contribution to the development of mechanism and machine theory. The first part of the article gives an outline of the history of the discipline until 1945, presents the context of the after-war activities of the author, and evaluates his influence on the development of machine and mechanism theory in Poland; it also carries a short biography of Moszyński. The rest of the article is devoted to Moszyński's scientific achievements, and describes his approach to matters of structure, kinematics and dynamics, with special focus on those of his formulations and solution to problems that appear particularly innovative and original. The article also points out those proposals by Moszyński which made him a precursor of other disciplines, such as vibroacoustics, biomechanics and ergonomics. The paper also presents the role of Moszyński's work as a foundation for the development of the Warsaw research-and-teching centre in the field. The achievements and methods of the Warsaw school

  16. Plutonium storage criteria

    SciTech Connect

    Chung, D.; Ascanio, X.

    1996-05-01

    The Department of Energy has issued a technical standard for long-term (>50 years) storage and will soon issue a criteria document for interim (<20 years) storage of plutonium materials. The long-term technical standard, {open_quotes}Criteria for Safe Storage of Plutonium Metals and Oxides,{close_quotes} addresses the requirements for storing metals and oxides with greater than 50 wt % plutonium. It calls for a standardized package that meets both off-site transportation requirements, as well as remote handling requirements from future storage facilities. The interim criteria document, {open_quotes}Criteria for Interim Safe Storage of Plutonium-Bearing Solid Materials{close_quotes}, addresses requirements for storing materials with less than 50 wt% plutonium. The interim criteria document assumes the materials will be stored on existing sites, and existing facilities and equipment will be used for repackaging to improve the margin of safety.

  17. Validation and acceptance of synthetic infrared imagery

    NASA Astrophysics Data System (ADS)

    Smith, Moira I.; Bernhardt, Mark; Angell, Christopher R.; Hickman, Duncan; Whitehead, Philip; Patel, Dilip

    2004-08-01

    This paper describes the use of an image query database (IQ-DB) tool as a means of implementing a validation strategy for synthetic long-wave infrared images of sea clutter. Specifically it was required to determine the validity of the synthetic imagery for use in developing and testing automatic target detection algorithms. The strategy adopted for exploiting synthetic imagery is outlined and the key issues of validation and acceptance are discussed in detail. A wide range of image metrics has been developed to achieve pre-defined validation criteria. A number of these metrics, which include post processing algorithms, are presented. Furthermore, the IQ-DB provides a robust mechanism for configuration management and control of the large volume of data used. The implementation of the IQ-DB is reviewed in terms of its cardinal point specification and its central role in synthetic imagery validation and EOSS progressive acceptance.

  18. High acceptance recoil polarimeter

    SciTech Connect

    The HARP Collaboration

    1992-12-05

    In order to detect neutrons and protons in the 50 to 600 MeV energy range and measure their polarization, an efficient, low-noise, self-calibrating device is being designed. This detector, known as the High Acceptance Recoil Polarimeter (HARP), is based on the recoil principle of proton detection from np[r arrow]n[prime]p[prime] or pp[r arrow]p[prime]p[prime] scattering (detected particles are underlined) which intrinsically yields polarization information on the incoming particle. HARP will be commissioned to carry out experiments in 1994.

  19. Baby-Crying Acceptance

    NASA Astrophysics Data System (ADS)

    Martins, Tiago; de Magalhães, Sérgio Tenreiro

    The baby's crying is his most important mean of communication. The crying monitoring performed by devices that have been developed doesn't ensure the complete safety of the child. It is necessary to join, to these technological resources, means of communicating the results to the responsible, which would involve the digital processing of information available from crying. The survey carried out, enabled to understand the level of adoption, in the continental territory of Portugal, of a technology that will be able to do such a digital processing. It was used the TAM as the theoretical referential. The statistical analysis showed that there is a good probability of acceptance of such a system.

  20. 20 CFR 30.220 - What are the criteria for eligibility for benefits relating to chronic silicosis?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... disease that arose as a consequence of the accepted chronic silicosis. ... benefits relating to chronic silicosis? 30.220 Section 30.220 Employees' Benefits OFFICE OF WORKERS... OF 2000, AS AMENDED Eligibility Criteria Eligibility Criteria for Claims Relating to...

  1. 20 CFR 30.220 - What are the criteria for eligibility for benefits relating to chronic silicosis?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... disease that arose as a consequence of the accepted chronic silicosis. ... benefits relating to chronic silicosis? 30.220 Section 30.220 Employees' Benefits OFFICE OF WORKERS... OF 2000, AS AMENDED Eligibility Criteria Eligibility Criteria for Claims Relating to...

  2. UPDATE ON PEC ACTIVITIES INCLUDING NEW EVALUATION CRITERIA, THE APPLICATION COMPLETENESS CHECKLIST, AND STATUS OF THE WEBSITE DEVELOPMENT

    EPA Science Inventory

    US EPA's Pathogen Equivalency Committee (PEC) has updated the evaluation criteria it uses to make recommendations of equivalency (to processes acceptable under 40CFR503) on innovative or alternative sludge pathogen reduction processes. These criteria will be presented along with ...

  3. Fire protection design criteria

    SciTech Connect

    1997-03-01

    This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, national Fire Protection Association Codes and Standards, and any other applicable DOE construction criteria. This Standard, along with other delineated criteria, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities.

  4. Water Quality Criteria

    EPA Pesticide Factsheets

    EPA develops water quality criteria based on the latest scientific knowledge to protect human health and aquatic life. This information serves as guidance to states and tribes in adopting water quality standards.

  5. Sonic boom acceptability studies

    NASA Technical Reports Server (NTRS)

    Shepherd, Kevin P.; Sullivan, Brenda M.; Leatherwood, Jack D.; Mccurdy, David A.

    1992-01-01

    The determination of the magnitude of sonic boom exposure which would be acceptable to the general population requires, as a starting point, a method to assess and compare individual sonic booms. There is no consensus within the scientific and regulatory communities regarding an appropriate sonic boom assessment metric. Loudness, being a fundamental and well-understood attribute of human hearing was chosen as a means of comparing sonic booms of differing shapes and amplitudes. The figure illustrates the basic steps which yield a calculated value of loudness. Based upon the aircraft configuration and its operating conditions, the sonic boom pressure signature which reaches the ground is calculated. This pressure-time history is transformed to the frequency domain and converted into a one-third octave band spectrum. The essence of the loudness method is to account for the frequency response and integration characteristics of the auditory system. The result of the calculation procedure is a numerical description (perceived level, dB) which represents the loudness of the sonic boom waveform.

  6. Flight Termination Criteria

    NASA Astrophysics Data System (ADS)

    Haber, Jerold M.; Larson, Erik

    2013-09-01

    The first line of defense in protecting the public against the threat of injury from a failing space booster is the flight termination system. Consequently, these systems must be highly reliable and the criteria for flight termination must be carefully formulated. Criteria must be developed based on observable data that allows adequate time for the data to be assessed and a flight termination action to be triggered. Criteria should be set so that 1) the chance a good vehicle will be terminated is small, 2) the chance of failing to terminate an errant vehicle before it can hazard population centers or valuable assets is minimal, and 3) there is assurance that the combination of the planned trajectory and mission rules do not induce excessive risks to land based populations, air lanes, and shipping lanes should the vehicle need to be terminated [1].This paper provides an overview of the approaches to developing and implement flight termination criteria and a tool for understanding risk implications of proposed criteria.

  7. Sediment quality criteria: A review with recommendations for developing criteria for the Hanford Site

    SciTech Connect

    Driver, C.J.

    1994-05-01

    Criteria for determining the quality of liver sediment are necessary to ensure that concentrations of contaminants in aquatic systems are within acceptable limits for the protection of aquatic and human life. Such criteria should facilitate decision-making about remediation, handling, and disposal of contaminants. Several approaches to the development of sediment quality criteria (SQC) have been described and include both descriptive and numerical methods. However, no single method measures all impacts at all times to all organisms (U.S. EPA 1992b). The U.S. EPA`s interest is primarily in establishing chemically based, numerical SQC that are applicable nation-wide (Shea 1988). Of the approaches proposed for SQC development, only three are being considered for numerical SQC on a national level. These approaches include an Equilibrium Partitioning Approach, a site-specific method using bioassays (the Apparent Effects Threshold Approach), and an approach similar to EPA`s water quality criteria (Pavlou and Weston 1984). Although national (or even regional) criteria address a number of political, litigative, and engineering needs, some researchers feel that protection of benthic communities require site-specific, biologically based criteria (Baudo et al. 1990). This is particularly true for areas where complex mixtures of contaminants are present in sediments. Other scientifically valid and accepted procedures for freshwater SQC include a background concentration approach, methods using field or spiked bioassays, a screening level concentration approach, the Apparent Effects Threshold Approach, the Sediment Quality Triad, the International Joint Commission Sediment Assessment Strategy, and the National Status and Trends Program Approach. The various sediment assessment approaches are evaluated for application to the Hanford Reach and recommendations for Hanford Site sediment quality criteria are discussed.

  8. NWTS program criteria for mined geologic disposal of nuclear waste: program objectives, functional requirements, and system performance criteria

    SciTech Connect

    1981-04-01

    At the present time, final repository criteria have not been issued by the responsible agencies. This document describes general objectives, requirements, and criteria that the DOE intends to apply in the interim to the National Waste Terminal Storage (NWTS) Program. These objectives, requirements, and criteria have been developed on the basis of DOE's analysis of what is needed to achieve the National objective of safe waste disposal in an environmentally acceptable and economic manner and are expected to be consistent with anticipated regulatory standards. The qualitative statements in this document address the broad issues of public and occupational health and safety, institutional acceptability, engineering feasibility, and economic considerations. A comprehensive set of criteria, general and project specific, of which these are a part, will constitute a portion of the technical basis for preparation and submittal by the DOE of formal documents to support future license applications for nuclear waste repositories.

  9. Criteria for structural test

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The results of a study to define criteria and techniques of design, analysis and test which permit the use of a single major structural test article for performing dynamic, fatigue, and static testing are presented. The criteria developed is applicable to both space vehicles and aircraft structures operating in the subsonic or supersonic regime. The feasibility of such an approach was demonstrated by defining test interactions, compatibilities and incompatibilities between the three different types of tests. The results of the study indicate that the single test article concept is feasible with a testing sequence of dynamic test followed by a fatigue and static test.

  10. Revisiting Bioaccumulation Criteria

    EPA Science Inventory

    The objective of workgroup 5 was to revisit the B(ioaccumulation) criteria that are currently being used to identify POPs under the Stockholm Convention and PBTs under CEPA, TSCA, REACh and other programs. Despite the lack of a recognized definition for a B substance, we defined ...

  11. 49 CFR 180.511 - Acceptable results of inspections and tests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... acceptance criteria. (f) Leakage pressure test. A tank car successfully passes the leakage pressure test when... 49 Transportation 3 2011-10-01 2011-10-01 false Acceptable results of inspections and tests. 180... results of inspections and tests. Provided it conforms with other applicable requirements of...

  12. Acceptance of tinnitus: validation of the tinnitus acceptance questionnaire.

    PubMed

    Weise, Cornelia; Kleinstäuber, Maria; Hesser, Hugo; Westin, Vendela Zetterqvist; Andersson, Gerhard

    2013-01-01

    The concept of acceptance has recently received growing attention within tinnitus research due to the fact that tinnitus acceptance is one of the major targets of psychotherapeutic treatments. Accordingly, acceptance-based treatments will most likely be increasingly offered to tinnitus patients and assessments of acceptance-related behaviours will thus be needed. The current study investigated the factorial structure of the Tinnitus Acceptance Questionnaire (TAQ) and the role of tinnitus acceptance as mediating link between sound perception (i.e. subjective loudness of tinnitus) and tinnitus distress. In total, 424 patients with chronic tinnitus completed the TAQ and validated measures of tinnitus distress, anxiety, and depression online. Confirmatory factor analysis provided support to a good fit of the data to the hypothesised bifactor model (root-mean-square-error of approximation = .065; Comparative Fit Index = .974; Tucker-Lewis Index = .958; standardised root mean square residual = .032). In addition, mediation analysis, using a non-parametric joint coefficient approach, revealed that tinnitus-specific acceptance partially mediated the relation between subjective tinnitus loudness and tinnitus distress (path ab = 5.96; 95% CI: 4.49, 7.69). In a multiple mediator model, tinnitus acceptance had a significantly stronger indirect effect than anxiety. The results confirm the factorial structure of the TAQ and suggest the importance of a general acceptance factor that contributes important unique variance beyond that of the first-order factors activity engagement and tinnitus suppression. Tinnitus acceptance as measured with the TAQ is proposed to be a key construct in tinnitus research and should be further implemented into treatment concepts to reduce tinnitus distress.

  13. Performance criteria for dosimeter angular response

    SciTech Connect

    Roberson, P.L.; Fox, R. A.; Cummings, F. M.; McDonald, J. C.; Jones, K.L.

    1988-06-01

    This report provides criteria for evaluating the response of personnel dosimeters to radiation at nonperpendicular incidence. The US Department of Energy Laboratory Accreditation Program (DOELAP) ensures that dosimetry systems at DOE facilities meet acceptable standards for precision and accuracy. In the past, these standards were limited to tests for system variability, energy dependence, and level of detection. The proposed criteria will broaden the scope of DOELAP to include the angular response of personnel dosimeters. Because occupational exposures in the workplace are rarely due to radiation from only one direction, dosimeters must accurately assign individual dose equivalent from irradiation at any forward angle of incidence. Including an angular response criterion in DOELAP would improve the quality of personnel monitoring provided that the criterion is developed from appropriate dose quantities. This report provides guidance for assigning individual dose equivalents for radiation fields at nonperpendicular incidence to the dosimeter. 21 refs., 10 figs., 10 tabs.

  14. Composting process design criteria. II. Detention time

    SciTech Connect

    Haug, R.T.

    1986-09-01

    Attention has always been directed to detention time as a criteria for design and operation of composting systems. Perhaps this is a logical outgrowth of work on liquid phase systems, where detention time is a fundamental parameter of design. Unlike liquid phase systems, however, the interpretation of detention time and actual values required for design have not been universally accepted in the case of composting. As a case in point, most compost systems incorporate facilities for curing the compost product. However, curing often is considered after the fact or as an add on with little relationship to the first stage, high-rate phase, whether reactor (in-vessel), static pile, or windrow. Design criteria for curing and the relationships between the first-stage, high-rate and second-stage, curing phases of a composting system have been unclear. In Part 2 of this paper, the concepts of hydraulic retention time (HRT) and solids residence time (SRT) are applied to the composting process. Definitions and design criteria for each are proposed. Based on these criteria, the first and second-stages can be designed and integrated into a complete composting system.

  15. Cone penetrometer acceptance test report

    SciTech Connect

    Boechler, G.N.

    1996-09-19

    This Acceptance Test Report (ATR) documents the results of acceptance test procedure WHC-SD-WM-ATR-151. Included in this report is a summary of the tests, the results and issues, the signature and sign- off ATP pages, and a summarized table of the specification vs. ATP section that satisfied the specification.

  16. Extended Criteria Donors in Liver Transplantation.

    PubMed

    Vodkin, Irine; Kuo, Alexander

    2017-05-01

    Mortality rates on the liver transplant waiting list are increasing. The shortage of organs has resulted in higher utilization of extended criteria donors (ECDs), with centers pushing the limits of what is acceptable for transplantation. Donor quality is more appropriately represented as a continuum of risk, and careful selection and matching of ECD grafts with recipients may lead to excellent outcomes. Although there is no precise definition for what constitutes an ECD liver, this review focuses on frequently cited characteristics, including donor age, steatosis, donation after cardiac death, and donors with increased risk of disease transmission.

  17. Criteria for submitting photos.

    PubMed

    Vallarelli, Andrelou Fralete Ayres

    2011-01-01

    Dermatological photography is used as a supplement to dermatological examination with the function of providing additional knowledge and information. Its quality depends on the expertise of the photographer-dermatologist in recording the relevant elements present. Therefore, the dermatologist should know basic principles of photography and the journal editors should ensure that the articles have high-quality images. This article suggests criteria to improve the quality of photographs submitted to journals for publication.

  18. Space Tethers: Design Criteria

    NASA Technical Reports Server (NTRS)

    Tomlin, D. D.; Faile, G. C.; Hayashida, K. B.; Frost, C. L.; Wagner, C. Y.; Mitchell, M. L.; Vaughn, J. A.; Galuska, M. J.

    1997-01-01

    This document is prepared to provide a systematic process for the selection of tethers for space applications. Criteria arc provided for determining the strength requirement for tether missions and for mission success from tether severing due to micrometeoroids and orbital debris particle impacts. Background information of materials for use in space tethers is provided, including electricity-conducting tethers. Dynamic considerations for tether selection is also provided. Safety, quality, and reliability considerations are provided for a tether project.

  19. Wall thinning criteria for low temperature-low pressure piping

    SciTech Connect

    Mertz, G.E.

    1993-01-01

    This acceptance criteria is intended to prevent gross rupture or rapidly propagating failure during normal and abnormal operating conditions. Pitting may be present in the carbon steel piping. While the acceptance criteria have provisions to preclude gross rupture through a pitted region, they do not protect against throughwall pit growth and subsequent leakage. Potential leakage through a pit in low pressure piping is less than the post-DBE design basis leakage. Both the uniform thinning and LTA criteria protect against leakage, since their potential for leakage is larger. The acceptance criteria protects against gross rupture due to general wall thinning, local wall thinning (LTA's), pitting, and fracture through weld defects. General wall thinning calculations are based on the restart criteria, SEP-24. LTA criteria for hoop stresses are based on ASME Code Case N-480 [open quotes]Examination Requirements for Pipe Wall Thinning Due to Single Phase Erosion and Corrosion[close quotes]. The LTA criteria for axial stress is based on an effective average thickness concept, which prevents plastic collapse of a locally thinned pipe. Limits on pit density, based on an effective cross section concept, are used to prevent gross rupture through a group of pits. The CEGB R-6 failure assessment diagram is used in the fracture evaluation, along with postulated weld defects. This criteria is intended for low temperature, low pressure piping systems. Corrosion and/or weld defects increase the peak stresses during normal operation and may lead to a reduction in fatigue life. Piping systems subject to significant thermal or mechanical fatigue will require additional analysis which is beyond the scope of this document.

  20. 34 CFR 603.24 - Criteria for State agencies.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... credit hours conforms to commonly accepted practice in higher education. (2) In reviewing and evaluating... 34 Education 3 2014-07-01 2014-07-01 false Criteria for State agencies. 603.24 Section 603.24 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF...

  1. 34 CFR 603.24 - Criteria for State agencies.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... credit hours conforms to commonly accepted practice in higher education. (2) In reviewing and evaluating... 34 Education 3 2013-07-01 2013-07-01 false Criteria for State agencies. 603.24 Section 603.24 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF...

  2. Learning Intentions and Success Criteria: Learners' and Teachers' Views

    ERIC Educational Resources Information Center

    Crichton, Hazel; McDaid, Ann

    2016-01-01

    It is generally accepted that Assessment for Learning (AfL) strategies are effective in teaching and learning. Approaches within this framework include the use of formative feedback, self and peer assessment and setting and discussion of learning intentions (LIs) and success criteria (SC). There has been a great deal of research into AfL…

  3. 49 CFR 611.11 - Local financial commitment criteria.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Local financial commitment criteria. 611.11... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MAJOR CAPITAL INVESTMENT PROJECTS § 611.11 Local financial... proposed project is supported by an acceptable degree of local financial commitment, as required by...

  4. Extending the Technology Acceptance Model: Policy Acceptance Model (PAM)

    NASA Astrophysics Data System (ADS)

    Pierce, Tamra

    There has been extensive research on how new ideas and technologies are accepted in society. This has resulted in the creation of many models that are used to discover and assess the contributing factors. The Technology Acceptance Model (TAM) is one that is a widely accepted model. This model examines people's acceptance of new technologies based on variables that directly correlate to how the end user views the product. This paper introduces the Policy Acceptance Model (PAM), an expansion of TAM, which is designed for the analysis and evaluation of acceptance of new policy implementation. PAM includes the traditional constructs of TAM and adds the variables of age, ethnicity, and family. The model is demonstrated using a survey of people's attitude toward the upcoming healthcare reform in the United States (US) from 72 survey respondents. The aim is that the theory behind this model can be used as a framework that will be applicable to studies looking at the introduction of any new or modified policies.

  5. 48 CFR 52.246-19 - Warranty of Systems and Equipment under Performance Specifications or Design Criteria.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Equipment under Performance Specifications or Design Criteria. 52.246-19 Section 52.246-19 Federal... under Performance Specifications or Design Criteria. As prescribed in 46.710(c)(1), the contracting... Specifications or Design Criteria (MAY 2001) (a) Definitions. As used in this clause— Acceptance means the act...

  6. On material fracture criteria

    NASA Astrophysics Data System (ADS)

    Kremnev, L. S.

    2017-01-01

    Based on the nonlinear mechanics of material fracture, a model of the fracture of materials with actual (discrete) structures has been constructed. The model is supported by proofs that crack resistance K 1 c and fracture toughness G 1 c obtained from the energy conservation law without using the assumptions adopted in the linear material fracture mechanics serve as the force and energy criteria in the nonlinear fracture mechanics. It has been shown that energy criterion G 1 c in the nonlinear mechanics is much greater than G 1 c in the linear fracture mechanics.

  7. Admissions Criteria in Teacher Education.

    ERIC Educational Resources Information Center

    Schwanke, Dean

    1981-01-01

    A review of the literature on the topic of admissions criteria in teacher education is presented. Bibliographic annotations review surveys, studies, models, and guidelines on various aspects of admissions criteria, as well as attracting and retaining quality students. (JN)

  8. Market Acceptance of Smart Growth

    EPA Pesticide Factsheets

    This report finds that smart growth developments enjoy market acceptance because of stability in prices over time. Housing resales in smart growth developments often have greater appreciation than their conventional suburban counterparts.

  9. L-286 Acceptance Test Record

    SciTech Connect

    HARMON, B.C.

    2000-01-14

    This document provides a detailed account of how the acceptance testing was conducted for Project L-286, ''200E Area Sanitary Water Plant Effluent Stream Reduction''. The testing of the L-286 instrumentation system was conducted under the direct supervision

  10. Nordic criteria for reproductive toxicity.

    PubMed

    Taskinen, H K

    1995-08-01

    Scientific criteria for assessment of the reproductive toxicity of chemicals have been proposed by a Nordic group of experts and regulatory representatives. The criteria take into account the results of clinical studies as well as of experimental research. The criteria should be useful in, for example, product control and labeling and planning of a safe work environment. The proposed Nordic criteria and examples of the assessment of the reproductive toxicity of some chemicals are presented.

  11. Center-level patterns of indicated willingness to and actual acceptance of marginal kidneys.

    PubMed

    Massie, A B; Stewart, D E; Dagher, N N; Montgomery, R A; Desai, N M; Segev, D L

    2010-11-01

    UNet(SM) , the UNOS data collection and electronic organ allocation system, allows centers to specify organ offer acceptance criteria for patients on their kidney waiting list. We hypothesized that the system might not be fully utilized and that the criteria specified by most transplant centers would be much broader than the characteristics of organs actually transplanted by those centers. We analyzed the distribution of criteria values among waitlist patients (N = 304 385) between January 2000 and February 2009, mean criteria values among listed candidates on February 19, 2009 and differences between a center's specified criteria and the organs it accepted for transplant between July 2005 and April 2009. We found wide variation in use of criteria variables, with some variables mostly or entirely unused. Most centers specified very broad criteria, with little within-center variation by patient. An offer of a kidney with parameters more extreme than the maximum actually transplanted at that center was designated a 'surplus offer' and indicated a potentially avoidable delay in distribution. We found 7373 surplus offers (7.1% of all offers), concentrated among a small number of centers. The organ acceptance criteria system is currently underutilized, leading to possibly avoidable inefficiencies in organ distribution.

  12. To accept, or not to accept, that is the question: citizen reactions to rationing

    PubMed Central

    Broqvist, Mari; Garpenby, Peter

    2014-01-01

    Abstract Background  The publicly financed health service in Sweden has come under increasing pressure, forcing policy makers to consider restrictions. Objective  To describe different perceptions of rationing, in particular, what citizens themselves believe influences their acceptance of having to stand aside for others in a public health service. Design  Qualitative interviews, analysed by phenomenography, describing perceptions by different categories. Setting and participants  Purposeful sample of 14 Swedish citizens, based on demographic criteria and attitudes towards allocation in health care. Results  Participants expressed high awareness of limitations in public resources and the necessity of rationing. Acceptance of rationing could increase or decrease, depending on one’s (i) awareness that healthcare resources are limited, (ii) endorsement of universal health care, (iii) knowledge and acceptance of the principles guiding rationing and (iv) knowledge about alternatives to public health services. Conclusions  This study suggests that decision makers should be more explicit in describing the dilemma of resource limitations in a publicly funded healthcare system. Openness enables citizens to gain the insight to make informed decisions, i.e. to use public services or to ‘opt out’ of the public sector solution if they consider rationing decisions unacceptable. PMID:22032636

  13. Defined and refined: criteria for identifying wound infection revisited.

    PubMed

    Cutting, Keith F; White, Richard

    2004-03-01

    Clinical criteria for the identification of wound infection are regularly based on a list created by Cutting and Harding (1994). This list was established from empirical data generated in a large, multidisciplinary clinical practice, and is now widely accepted as a seminal article in wound care. Both Cutting (1998) and Gardner et al (2001) have conducted validation exercises on these wound infection criteria, based on the assumption that the criteria broadly apply to most wound types. Although many of the original criteria do apply across the spectrum of wound types, the major categories of wounds should be considered separately to avoid the possibility of overlooking the presence of infection. The focus of this article is a review of the published literature on wound infection criteria for acute and surgical wounds, diabetic foot ulcers, venous and arterial leg ulcers, pressure ulcers and burns. All known criteria for each wound type are presented, as well as an outline of the ongoing research project to refine the criteria by wound type using a Delphi panel technique. No attempt has been made to correlate visual signs and symptoms with microbiological sampling techniques. It is clear that there are subtle variations between infection criteria for wound types and that these should be recognized if treatment is to be given appropriately and promptly, and morbidity avoided.

  14. Criteria for Continuing Professional Development of Technology Teachers' Professional Knowledge: A Theoretical Perspective

    ERIC Educational Resources Information Center

    Engelbrecht, Werner; Ankiewicz, Piet

    2016-01-01

    Continuing professional teacher development (CPTD) is generally accepted as an indispensable tool for the professional development of technology teachers. The current theoretical framework for CPTD comprises a variety of models. However, criteria underpinning these models are not explicit. If, in turn, the criteria were explicit, it could serve as…

  15. Criteria For Judging the Credibility of Children's Statements about Their Sexual Abuse.

    ERIC Educational Resources Information Center

    Faller, Kathleen Coulborn

    1988-01-01

    Total of 103 cases of child sexual abuse in which offenders confessed to some level of abuse were examined for purpose of determining extent to which children's statements contained three widely accepted clinical criteria of a true sexual abuse allegation. Criteria were information about context of the sexual abuse, description or demonstration of…

  16. Laser Safety Inspection Criteria

    SciTech Connect

    Barat, K

    2005-02-11

    A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

  17. 45 CFR 400.76 - Criteria for exemption from registration for employment services, participation in employability...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 2 2010-10-01 2010-10-01 false Criteria for exemption from registration for employment services, participation in employability service programs, and acceptance of appropriate offers of... programs, and acceptance of appropriate offers of employment. States and local resettlement...

  18. Laser Safety Inspection Criteria

    SciTech Connect

    Barat, K

    2005-06-13

    A responsibility of the Laser Safety Officer (LSO) is to perform laser audits. The American National Standard Z136.1 Safe Use of Lasers references this requirement through several sections. One such reference is Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''. The composition, frequency and rigor of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms It is common for audit findings from one inspector or inspection to the next to vary even when reviewing the same material. How often has one heard a comment, ''well this area has been inspected several times over the years and no one ever said this or that was a problem before''. A great number of audit items, and therefore findings, are subjective because they are based on the experience and interest of the auditor to particular items on the checklist. Beam block usage, to one set of eyes might be completely adequate, while to another, inadequate. In order to provide consistency, the Laser Safety Office of the National Ignition Facility Directorate has established criteria for a number of items found on the typical laser safety audit form. The criteria are distributed to laser users. It serves two broad purposes; first, it gives the user an expectation of what will be reviewed by an auditor. Second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items, such as labelling of beam blocks.

  19. Sample quality criteria.

    PubMed

    Ramsey, Charles A; Wagner, Claas

    2015-01-01

    The concept of Sample Quality Criteria (SQC) is the initial step in the scientific approach to representative sampling. It includes the establishment of sampling objectives, Decision Unit (DU), and confidence. Once fully defined, these criteria serve as input, in addition to material properties, to the Theory of Sampling for developing a representative sampling protocol. The first component of the SQC establishes these questions: What is the analyte(s) of concern? What is the concentration level of interest of the analyte(s)? How will inference(s) be made from the analytical data to the DU? The second component of the SQC establishes the DU, i.e., the scale at which decisions are to be made. On a large scale, a DU could be a ship or rail car; examples for small-scale DUs are individual beans, seeds, or kernels. A well-defined DU is critical because it defines the spatial and temporal boundaries of sample collection. SQC are not limited to a single DU; they can also include multiple DUs. The third SQC component, the confidence, establishes the desired probability that a correct inference (decision) can be made. The confidence level should typically correlate to the potential consequences of an incorrect decision (e.g., health or economic). The magnitude of combined errors in the sampling, sample processing and analytical protocols determines the likelihood of an incorrect decision. Thus, controlling error to a greater extent increases the probability of a correct decision. The required confidence level directly affects the sampling effort and QC measures.

  20. From requirements to acceptance tests

    NASA Technical Reports Server (NTRS)

    Baize, Lionel; Pasquier, Helene

    1993-01-01

    From user requirements definition to accepted software system, the software project management wants to be sure that the system will meet the requirements. For the development of a telecommunication satellites Control Centre, C.N.E.S. has used new rules to make the use of tracing matrix easier. From Requirements to Acceptance Tests, each item of a document must have an identifier. A unique matrix traces the system and allows the tracking of the consequences of a change in the requirements. A tool has been developed, to import documents into a relational data base. Each record of the data base corresponds to an item of a document, the access key is the item identifier. Tracing matrix is also processed, providing automatically links between the different documents. It enables the reading on the same screen of traced items. For example one can read simultaneously the User Requirements items, the corresponding Software Requirements items and the Acceptance Tests.

  1. Defining acceptable conditions in wilderness

    NASA Astrophysics Data System (ADS)

    Roggenbuck, J. W.; Williams, D. R.; Watson, A. E.

    1993-03-01

    The limits of acceptable change (LAC) planning framework recognizes that forest managers must decide what indicators of wilderness conditions best represent resource naturalness and high-quality visitor experiences and how much change from the pristine is acceptable for each indicator. Visitor opinions on the aspects of the wilderness that have great impact on their experience can provide valuable input to selection of indicators. Cohutta, Georgia; Caney Creek, Arkansas; Upland Island, Texas; and Rattlesnake, Montana, wilderness visitors have high shared agreement that littering and damage to trees in campsites, noise, and seeing wildlife are very important influences on wilderness experiences. Camping within sight or sound of other people influences experience quality more than do encounters on the trails. Visitors’ standards of acceptable conditions within wilderness vary considerably, suggesting a potential need to manage different zones within wilderness for different clientele groups and experiences. Standards across wildernesses, however, are remarkably similar.

  2. UO3 deactivation end point criteria

    SciTech Connect

    Stefanski, L.D.

    1994-10-01

    The UO{sub 3} Deactivation End Point Criteria are necessary to facilitate the transfer of the UO{sub 3} Facility from the Office of Facility Transition and Management (EM-60) to the office of Environmental Restoration (EM-40). The criteria were derived from a logical process for determining end points for the systems and spaces at the UO{sub 3}, Facility based on the objectives, tasks, and expected future uses pertinent to that system or space. Furthermore, the established criteria meets the intent and supports the draft guidance for acceptance criteria prepared by EM-40, {open_quotes}U.S. Department of Energy office of Environmental Restoration (EM-40) Decontamination and Decommissioning Guidance Document (Draft).{close_quotes} For the UO{sub 3} Facility, the overall objective of deactivation is to achieve a safe, stable and environmentally sound condition, suitable for an extended period, as quickly and economically as possible. Once deactivated, the facility is kept in its stable condition by means of a methodical surveillance and maintenance (S&M) program, pending ultimate decontamination and decommissioning (D&D). Deactivation work involves a range of tasks, such as removal of hazardous material, elimination or shielding of radiation fields, partial decontamination to permit access for inspection, installation of monitors and alarms, etc. it is important that the end point of each of these tasks be established clearly and in advance, for the following reasons: (1) End points must be such that the central element of the deactivation objective - to achieve stability - is unquestionably achieved. (2) Much of the deactivation work involves worker exposure to radiation or dangerous materials. This can be minimized by avoiding unnecessary work. (3) Each task is, in effect, competing for resources with other deactivation tasks and other facilities. By assuring that each task is appropriately bounded, DOE`s overall resources can be used most fully and effectively.

  3. Classification criteria for rheumatoid arthritis.

    PubMed

    MacGregor, A J

    1995-05-01

    The development of classification schemes for RA in the last 40 years has followed the increasingly precise understanding of the nature of the clinical disease and the recognition of the different requirements of classification methods in clinic and population settings. In published studies of RA in clinic patients the most widely used criteria sets have been the 1958 ARA (ACR) criteria and its 1961 adaptation (the Rome (active) criteria). These sets classified disease as 'classical', 'definite', 'probable' and 'possible' RA based on criteria comprising clinical, serological, radiological and histological features (the latter were dropped from the Rome criteria set because of their impracticality). More recently, a new criteria set (the 1987 ARA criteria) has been developed using statistical techniques. This set was derived using RA cases and controls attending hospital clinics. It is based on the earlier criteria sets but accommodates the characteristic pattern of joint involvement in RA more precisely. The criteria recognize only the single disease category of 'rheumatoid arthritis'. In validation studies, the 1987 criteria set has been found to have enhanced specificity over earlier schemes in clinic-based studies of RA. The sensitivity may, however, be reduced, in particular in studies of early disease. The application of classification criteria for case recognition in the population and family studies of RA has proved more problematic. In these settings, there is the additional requirement to recognize individuals with remitted and inactive disease as RA cases. The 1966 New York criteria were developed for this specific purpose, however their format proved cumbersome and they have not been widely adopted. The 1987 criteria set is insufficiently sensitive to recognize inactive disease if the criteria are applied exactly as they have been defined. The sensitivity of the 1987 criteria set is, however, substantially enhanced if the criteria are adapted to

  4. Further Conceptualization of Treatment Acceptability

    ERIC Educational Resources Information Center

    Carter, Stacy L.

    2008-01-01

    A review and extension of previous conceptualizations of treatment acceptability is provided in light of progress within the area of behavior treatment development and implementation. Factors including legislation, advances in research, and service delivery models are examined as to their relationship with a comprehensive conceptualization of…

  5. Acceptance and Commitment Therapy: Introduction

    ERIC Educational Resources Information Center

    Twohig, Michael P.

    2012-01-01

    This is the introductory article to a special series in Cognitive and Behavioral Practice on Acceptance and Commitment Therapy (ACT). Instead of each article herein reviewing the basics of ACT, this article contains that review. This article provides a description of where ACT fits within the larger category of cognitive behavior therapy (CBT):…

  6. Nitrogen trailer acceptance test report

    SciTech Connect

    Kostelnik, A.J.

    1996-02-12

    This Acceptance Test Report documents compliance with the requirements of specification WHC-S-0249. The equipment was tested according to WHC-SD-WM-ATP-108 Rev.0. The equipment being tested is a portable contained nitrogen supply. The test was conducted at Norco`s facility.

  7. Imaginary Companions and Peer Acceptance

    ERIC Educational Resources Information Center

    Gleason, Tracy R.

    2004-01-01

    Early research on imaginary companions suggests that children who create them do so to compensate for poor social relationships. Consequently, the peer acceptance of children with imaginary companions was compared to that of their peers. Sociometrics were conducted on 88 preschool-aged children; 11 had invisible companions, 16 had personified…

  8. Euthanasia Acceptance: An Attitudinal Inquiry.

    ERIC Educational Resources Information Center

    Klopfer, Fredrick J.; Price, William F.

    The study presented was conducted to examine potential relationships between attitudes regarding the dying process, including acceptance of euthanasia, and other attitudinal or demographic attributes. The data of the survey was comprised of responses given by 331 respondents to a door-to-door interview. Results are discussed in terms of preferred…

  9. Helping Our Children Accept Themselves.

    ERIC Educational Resources Information Center

    Gamble, Mae

    1984-01-01

    Parents of a child with muscular dystrophy recount their reactions to learning of the diagnosis, their gradual acceptance, and their son's resistance, which was gradually lessened when he was provided with more information and treated more normally as a member of the family. (CL)

  10. CDTI target selection criteria

    NASA Technical Reports Server (NTRS)

    Britt, C. L.; Davis, C. M.; Jackson, C. B.; Mcclellan, V. A.

    1984-01-01

    A Cockpit Display of Traffic Information (CDTI) is a cockpit instrument which provides information to the aircrew on the relative location of aircraft traffic in the vicinity of their aircraft (township). In addition, the CDTI may provide information to assist in navigation and in aircraft control. It is usually anticipated that the CDTI will be integrated with a horizontal situation indicator used for navigational purposes and/or with a weather radar display. In this study, several sets of aircraft traffic data are analyzed to determine statistics on the number of targets that will be displayed on a CDTI using various target selection criteria. Traffic data were obtained from an Atlanta Terminal Area Simulation and from radar tapes recorded at the Atlanta and Miami terminal areas. Results are given in the form of plots showing the average percentage of time (or probability) that an aircraft equipped with a CDTI would observe from 0 to 10 other aircraft on the display for range settings on the CDTI up to 30 n. mi. and using various target discrimination techniques.

  11. FHR Generic Design Criteria

    SciTech Connect

    Flanagan, George F; Holcomb, David Eugene; Cetiner, Sacit M

    2012-06-01

    The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC) - based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

  12. Energy storage criteria handbook

    NASA Astrophysics Data System (ADS)

    Hull, J. R.; Cole, R. L.; Hull, A. B.

    1982-10-01

    The purpose of this handbook is to provide information and criteria necessary for the selection and sizing of energy storage technologies for use at U.S. Naval facilities. The handbook gives Naval base personnel procedures and information to select the most viable energy storage options to provide the space conditioning (heating and cooling) and domestic hot water needs of their facility. The handbook may also be used by contractors, installers, designers, engineers, architects, and manufacturers who intend to enter the energy storage business. The handbook is organized into three major sections: a general section, a technical section, and an example section. While a technical background is assumed for the latter two sections, the general section is simply written and can serve as an introduction to the field of energy storage. The technical section examines the following energy storage technologies: sensible heat storage, latent heat storage, cold storage, thermochemical storage, mechanical storage, pumped hydro storage, and electrochemical storage. The example section is limited to thermal storage and includes examples for: water tank storage, rockbed storage, latent heat storage, and cold water storage.

  13. ACR Appropriateness Criteria Myelopathy.

    PubMed

    Roth, Christopher J; Angevine, Peter D; Aulino, Joseph M; Berger, Kevin L; Choudhri, Asim F; Fries, Ian Blair; Holly, Langston T; Kendi, Ayse Tuba Karaqulle; Kessler, Marcus M; Kirsch, Claudia F; Luttrull, Michael D; Mechtler, Laszlo L; O'Toole, John E; Sharma, Aseem; Shetty, Vilaas S; West, O Clark; Cornelius, Rebecca S; Bykowski, Julie

    2016-01-01

    Patients presenting with myelopathic symptoms may have a number of causative intradural and extradural etiologies, including disc degenerative diseases, spinal masses, infectious or inflammatory processes, vascular compromise, and vertebral fracture. Patients may present acutely or insidiously and may progress toward long-term paralysis if not treated promptly and effectively. Noncontrast CT is the most appropriate first examination in acute trauma cases to diagnose vertebral fracture as the cause of acute myelopathy. In most nontraumatic cases, MRI is the modality of choice to evaluate the location, severity, and causative etiology of spinal cord myelopathy, and predicts which patients may benefit from surgery. Myelopathy from spinal stenosis and spinal osteoarthritis is best confirmed without MRI intravenous contrast. Many other myelopathic conditions are more easily visualized after contrast administration. Imaging performed should be limited to the appropriate spinal levels, based on history, physical examination, and clinical judgment. The ACR Appropriateness Criteria are evidence-based guidelines for specific clinical conditions that are reviewed every three years by a multidisciplinary expert panel. The guideline development and review include an extensive analysis of current medical literature from peer-reviewed journals, and the application of a well-established consensus methodology (modified Delphi) to rate the appropriateness of imaging and treatment procedures by the panel. In those instances in which evidence is lacking or not definitive, expert opinion may be used to recommend imaging or treatment.

  14. ACR appropriateness criteria jaundice.

    PubMed

    Lalani, Tasneem; Couto, Corey A; Rosen, Max P; Baker, Mark E; Blake, Michael A; Cash, Brooks D; Fidler, Jeff L; Greene, Frederick L; Hindman, Nicole M; Katz, Douglas S; Kaur, Harmeet; Miller, Frank H; Qayyum, Aliya; Small, William C; Sudakoff, Gary S; Yaghmai, Vahid; Yarmish, Gail M; Yee, Judy

    2013-06-01

    A fundamental consideration in the workup of a jaundiced patient is the pretest probability of mechanical obstruction. Ultrasound is the first-line modality to exclude biliary tract obstruction. When mechanical obstruction is present, additional imaging with CT or MRI can clarify etiology, define level of obstruction, stage disease, and guide intervention. When mechanical obstruction is absent, additional imaging can evaluate liver parenchyma for fat and iron deposition and help direct biopsy in cases where underlying parenchymal disease or mass is found. Imaging techniques are reviewed for the following clinical scenarios: (1) the patient with painful jaundice, (2) the patient with painless jaundice, and (3) the patient with a nonmechanical cause for jaundice. The ACR Appropriateness Criteria are evidence-based guidelines for specific clinical conditions that are reviewed every 2 years by a multidisciplinary expert panel. The guideline development and review include an extensive analysis of current medical literature from peer-reviewed journals and the application of a well-established consensus methodology (modified Delphi) to rate the appropriateness of imaging and treatment procedures by the panel. In those instances where evidence is lacking or not definitive, expert opinion may be used to recommend imaging or treatment.

  15. FHR Generic Design Criteria

    SciTech Connect

    Flanagan, G.F.; Holcomb, D.E.; Cetiner, S.M.

    2012-06-15

    The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC)–based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

  16. [BMW diagnostic criteria for IBS].

    PubMed

    Matsueda, Kei

    2006-08-01

    Rome I diagnostic criteria for IBS was published in 1992 and it became a global diagnostic criteria. However, the criteria was not practical and somewhat complicated. Moreover, its symptomatic duration was too long (defined as more than 3 months) to be introduced in clinical practice. Therefore, Japanese member of BMW(Bowel Motility Workshop) tried to develop a new diagnostic criteria for IBS and it was established in 1995 by way of the Delphi method. The criteria was named as BMW diagnostic criteria and it was shown below: BMW diagnostic criteria for IBS (1995) At least one month or more of repetitive symptoms of the following 1) and 2) and no evidence of organic disease that likely to explain the symptoms. 1) Existence of abdominal pain, abdominal discomfort or abdominal distension 2) Existence of abnormal bowel movement (diarrhea, constipation) Abnormal bowel movement includes at least one of the below; (1) Abnormal stool frequency (2) Abnormal stool form (lumpy/hard or loose/wartery stool) Moreover, the following test should be performed as a rule to exclude organic diseases. (1) Urinalysis, fecal occult blood testing, CBC, chemistry (2) Barium enema or colonofiberscopic examination The other diagnostic criteria for IBS was also reviewed and their characteristics were compared with BMW diagnostic criteria.

  17. The cytologic criteria of malignancy.

    PubMed

    Fischer, Andrew H; Zhao, Chengquan; Li, Qing Kay; Gustafson, Karen S; Eltoum, Isam-Eldin; Tambouret, Rosemary; Benstein, Barbara; Savaloja, Lynnette C; Kulesza, Peter

    2010-07-01

    Cytology and cell biology are two separate fields that share a focus on cancer. Cancer is still diagnosed based on morphology, and surprisingly little is known about the molecular basis of the defining structural features. Cytology uses the smallest possible biopsy for diagnosis by reducing morphologic "criteria of malignancy" to the smallest scale. To begin to develop common ground, members of the American Society of Cytopathology Cell Biology Liaison Working Group classify some of the "criteria of malignancy" and review their relation to current cell biology concepts. The criteria of malignancy are extremely varied, apparently reflecting many different pathophysiologies in specific microenvironments. Criteria in Group 1 comprise tissue-level alterations that appear to relate to resistance to anoikis, alterations in cell adhesion molecules, and loss of apical-basal polarity. Criteria in Group 2 reflect genetic instability, including chromosomal and possibly epigenetic instability. Criteria in Groups 3 are subcellular structural changes involving cytoplasmic components, nuclear lamina, chromatin and nucleoli that cannot be accounted for by genetic instability. Some distinct criteria in Group 3 are known to be induced by cancer genes, but their precise structural basis remains obscure. The criteria of malignancy are not closely related to the histogenetic classification of cancers, and they appear to provide an alternative, biologically relevant framework for establishing common ground between cytologists and cell biologists. To understand the criteria of malignancy at a molecular level would improve diagnosis, and likely point to novel cell physiologies that are not encompassed by current cell biology concepts.

  18. Developing organ offer and acceptance measures: when 'good' organs are turned down.

    PubMed

    Wolfe, R A; LaPorte, F B; Rodgers, A M; Roys, E C; Fant, G; Leichtman, A B

    2007-01-01

    Turndowns of offers of deceased donor kidneys for transplantation can contribute to inefficiencies in the organ distribution system and inequality in access to donated organs. Match run data were obtained for 4967 'good' kidneys placed and transplanted in 2005 after fewer than 50 offers. These kidneys were not recovered from donation after cardiac death or expanded criteria donors, or from donors with a history of substance abuse. On average, these good kidneys were not accepted until after seven offers to candidates and after offers to 2.4 programs. Models for the likelihood of acceptance found several donor and candidate characteristics to be significantly related to acceptance rates (p < 0.05). After accounting for these variables, there remained 2- to 3-fold differences among transplant programs in acceptance rates. These models could be used to identify kidney transplant centers with exceptional acceptance practices. Several strategies might be employed to increase acceptance rates for good organs.

  19. Acceptable Knowledge Summary Report for Waste Stream: SR-T001-221F-HET/Drums

    SciTech Connect

    Lunsford, G.F.

    1999-06-14

    This report is fully responsive to the requirements of Section 4.0 Acceptable Knowledge from the WIPP Transuranic Waste Characterization Quality Assurance Plan, CAO-94-1010, and provides a sound, (and auditable) characterization that satisfies the WIPP criteria for Acceptable Knowledge.

  20. Mathematics Teachers' Criteria of Dimension

    ERIC Educational Resources Information Center

    Ural, Alattin

    2014-01-01

    The aim of the study is to determine mathematics teachers' decisions about dimensions of the geometric figures, criteria of dimension and consistency of decision-criteria. The research is a qualitative research and the model applied in the study is descriptive method on the basis of general scanning model. 15 mathematics teachers attended the…

  1. Peer Assessment without Assessment Criteria

    ERIC Educational Resources Information Center

    Jones, Ian; Alcock, Lara

    2014-01-01

    Peer assessment typically requires students to judge peers' work against assessment criteria. We tested an alternative approach in which students judged pairs of scripts against one another in the absence of assessment criteria. First year mathematics undergraduates (N?=?194) sat a written test on conceptual understanding of multivariable…

  2. Acceptability of reactors in space

    SciTech Connect

    Buden, D.

    1981-01-01

    Reactors are the key to our future expansion into space. However, there has been some confusion in the public as to whether they are a safe and acceptable technology for use in space. The answer to these questions is explored. The US position is that when reactors are the preferred technical choice, that they can be used safely. In fact, it does not appear that reactors add measurably to the risk associated with the Space Transportation System.

  3. Acceptability of reactors in space

    SciTech Connect

    Buden, D.

    1981-04-01

    Reactors are the key to our future expansion into space. However, there has been some confusion in the public as to whether they are a safe and acceptable technology for use in space. The answer to these questions is explored. The US position is that when reactors are the preferred technical choice, that they can be used safely. In fact, it dies not appear that reactors add measurably to the risk associated with the Space Transportation System.

  4. Corps of Engineers Hydraulic Design Criteria. Volume I

    DTIC Science & Technology

    1977-01-01

    of 13. The model scale was 1:25. The Ke ( loss coefficient) values shown are based on model ( ,221-1/1 M! discharge rating curves, computed energy ...available to offices of the Corps of Engineers for use as k hydraulic design criteria. Certain design aids based on accepted theory, such as energy -depth...612 Supercritical Flow 620 Nonuniform Flow 621 Mild Slopes 622 Steep Slopes 630 Energy Losses 631 Friction Losses 632 Special Losses 640Q Transitions

  5. OH Fluorescence and Prompt Emission in comet 103P/Hartley 2 observed by EPOXI mission and expected results for comet 67P/Churyumov-Gerasimenko observed by Rosetta/OSIRIS WAC camera

    NASA Astrophysics Data System (ADS)

    La Forgia, F.; A'Hearn, M. F.; Lazzarin, M.; Magrin, S.; Bodewits, D.; Bertini, I.; Pajola, M.; Barbier, C.; Sierks, H.

    2014-04-01

    possibility that this OH structure could be partially associated with OH PE has been performed. This is strongly supported by the agreement of the OH spatial distribution with the water spatial distribution derived from HRI IR spectrometer observations (A'Hearn et al. 2011). Given the results on comet Hartley 2, we present our expectations and preliminary analysis of OH fluorescence and prompt emission mechanisms in the coma of 67P/Churyumov-Gerasimenko, target of the Rosetta mission. The OSIRIS WAC camera on board Rosetta is equipped with 7 narrowband filters centered on molecular emission bands, including the OH gas filter. This will enable us to investigate OH fluorescence and PE at increasing resolution as Rosetta will approach the comet. This analysis, supported by accompanying observations acquired by OSIRIS WAC camera in the forbidden OI band at 630 nm, will help in further constrain the water photochemistry and the fluorescence and PE processes occurring in the cometary comae.

  6. Development of explicit criteria for cholecystectomy

    PubMed Central

    Quintana, J; Cabriada, J; d Lopez; Varona, M; Oribe, V; Barrios, B; Arostegui, I; Bilbao, A

    2002-01-01

    Objective: Consensus development techniques were used in the late 1980s to create explicit criteria for the appropriateness of cholecystectomy. New diagnostic and treatment techniques have been developed in the last decade, so an updated appropriateness of indications tool was developed for cholecystectomy in patients with non-malignant diseases. The validity and reliability of panel results using this tool were tested. Methods: Criteria were developed using a modified Delphi panel judgement process. The level of agreement between the panellists (six gastroenterologists and six surgeons) was analysed and the ratings were compared with those of a second different panel using weighted kappa statistics. Results: The results of the main panel were presented as a decision tree. Of the 210 scenarios evaluated by the main panel in the second round, 51% were found appropriate, 26% uncertain, and 23% inappropriate. Agreement was achieved in 54% of the scenarios and disagreement in 3%. Although the gastroenterologists tended to score fewer scenarios as appropriate, as a group they did not differ from the surgeons. Comparison of the ratings of the main panel with those of a second panel resulted in a weighted kappa statistic of 0.75. Conclusions: The parameters tested showed acceptable validity and reliability results for an evaluation tool. These results support the use of this algorithm as a screening tool for assessing the appropriateness of cholecystectomy. PMID:12468691

  7. Update on diagnosis of acute rheumatic fever: 2015 Jones criteria.

    PubMed

    Eroğlu, Ayşe Güler

    2016-03-01

    In the final Jones criteria, different diagnostic criteria were established for the diagnosis of acute rheumatic fever for low risk and moderate-high risk populations. Turkey was found to be compatible with moderate-high risk populations as a result of regional screenings performed in terms of acute rheumatic fever and rheumatic heart disease. The changes in the diagnostic criteria for low-risk populations include subclinical carditis found on echocardiogram as a major criterion in addition to carditis found clinically and a body temperature of 38.5°C and above as a minor criterion. In moderate-high risk populations including Turkey, subclinical carditis found on echocardiogram in addition to clinical carditis is used as a major criterion as a new amendment. In addition, aseptic monoarthritis and polyarthralgia are used as major criteria in addition to migratory arthritis and monoarhtralgia is used as a minor criterion among joint findings. However, differentiation of subclinical carditis from physiological valve regurgitation found in healthy individuals and exclusion of other diseases involving joints when aseptic monoarthritis and polyarthralgia are used as major criteria are very important. In addition, a body temperature of 38°C and above and an erythrocyte sedimentation rate of 30 mm/h and above have been accepted as minor criteria. The diagnostic criteria for the first attack have not been changed; three minor findings have been accepted in presence of previous sterptococcal infection in addition to the old cirteria for recurrent attacks. In the final Jones criteria, it has been recommended that patients who do not fully meet the diagnostic criteria of acute rheumatic fever should be treated as acute rheumatic fever if another diagnosis is not considered and should be followed up with benzathine penicilin prophylaxis for 12 months. It has been decided that these patients be evaluated 12 months later and a decision for continuation or discontinuation of

  8. Update on diagnosis of acute rheumatic fever: 2015 Jones criteria

    PubMed Central

    Eroğlu, Ayşe Güler

    2016-01-01

    In the final Jones criteria, different diagnostic criteria were established for the diagnosis of acute rheumatic fever for low risk and moderate-high risk populations. Turkey was found to be compatible with moderate-high risk populations as a result of regional screenings performed in terms of acute rheumatic fever and rheumatic heart disease. The changes in the diagnostic criteria for low-risk populations include subclinical carditis found on echocardiogram as a major criterion in addition to carditis found clinically and a body temperature of 38.5°C and above as a minor criterion. In moderate-high risk populations including Turkey, subclinical carditis found on echocardiogram in addition to clinical carditis is used as a major criterion as a new amendment. In addition, aseptic monoarthritis and polyarthralgia are used as major criteria in addition to migratory arthritis and monoarhtralgia is used as a minor criterion among joint findings. However, differentiation of subclinical carditis from physiological valve regurgitation found in healthy individuals and exclusion of other diseases involving joints when aseptic monoarthritis and polyarthralgia are used as major criteria are very important. In addition, a body temperature of 38°C and above and an erythrocyte sedimentation rate of 30 mm/h and above have been accepted as minor criteria. The diagnostic criteria for the first attack have not been changed; three minor findings have been accepted in presence of previous sterptococcal infection in addition to the old cirteria for recurrent attacks. In the final Jones criteria, it has been recommended that patients who do not fully meet the diagnostic criteria of acute rheumatic fever should be treated as acute rheumatic fever if another diagnosis is not considered and should be followed up with benzathine penicilin prophylaxis for 12 months. It has been decided that these patients be evaluated 12 months later and a decision for continuation or discontinuation of

  9. Finding an environmentally acceptable replacement for Halon 2402 that meets Minuteman LITVC performance criteria

    NASA Astrophysics Data System (ADS)

    Shell, Vaughn; Marlow, Mike; Nimitz, Jon

    1992-07-01

    Halon 2402 (Freon 114B2) is injected into the hot gas exhaust stream of the Minuteman second-stage solid propellant rocket motor nozzle to provide thrust vector control. In response to environmental concerns, specifically ozone depletion, the U.S. Air Force has established a program to find and qualify a replacement for Halon 2402. Because of anticipated schedule constraints, two parallel paths consisting of a 'drop-in' replacement, and a complete thrust vector control system redesign will be pursued during the first phase of the program. Tasks within the first phase support a series of candidate down selections. These tasks include review of various data bases for possible candidates and then evaluating the candidates in terms of environmental effects, cost, storability, compatibility, packaging, and performance. The culmination of the first phase will be two static motor firings in which two drop-in injectant candidates and two redesign system candidates will be tested to determine actual performance. The results of the firings will dictate which path (drop-in or redesign) and which injectant to pursue for formal qualification. Presently, Phase I is approximately 50 percent complete with the many candidates being reduced to three for each path.

  10. 46 CFR 54.05-17 - Weld toughness test acceptance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... impact tests the energy absorbed in both the weld metal and heat affected zone impact tests in weld... required for the parent material. (2) For heat affected zone specimens, when the specimens are transversely oriented, not less than the transverse values required for the parent material. (3) For heat affected...

  11. 46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation Device...) Flotation Foam; or (xi) Other (specify). (2) The request must include a statement identifying the...

  12. 46 CFR 54.05-17 - Weld toughness test acceptance criteria.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Section 54.05-17 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING... impact tests the energy absorbed in both the weld metal and heat affected zone impact tests in weld qualification and production shall be: (1) For weld metal specimens, not less than the transverse...

  13. 46 CFR 54.05-17 - Weld toughness test acceptance criteria.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Section 54.05-17 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING... impact tests the energy absorbed in both the weld metal and heat affected zone impact tests in weld qualification and production shall be: (1) For weld metal specimens, not less than the transverse...

  14. 46 CFR 54.05-17 - Weld toughness test acceptance criteria.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Section 54.05-17 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING... impact tests the energy absorbed in both the weld metal and heat affected zone impact tests in weld qualification and production shall be: (1) For weld metal specimens, not less than the transverse...

  15. Criteria for acceptable levels of the Shinkansen Super Express train noise and vibration in residential areas

    NASA Astrophysics Data System (ADS)

    Yamanaka, K.; Nakagawa, T.; Kobayashi, F.; Kanada, S.; Tanahashi, M.; Muramatsu, T.; Yamada, S.

    1982-10-01

    A survey of 1187 housewives living in 18 areas along the Shinkansen Super Express (bullet train) railway was conducted by means of a self-administered health questionnaire (modified Cornell Medical Index). In addition, geographically corresponding measurements of noise level and vibration intensity were taken. The relationship of noise and vibration to positive responses (health complaints) related to bodily symptoms, illness and emotional disturbances was analyzed. The factors which correlated with an increase in the average number of positive responses included noise, vibration, age and health status. Such factors as marital status, educational level, part time work, duration of inhabitancy and occupation of the head of the houshold correlated poorly with the number of positive responses. Unhealthy respondents compared to healthy respondents are more frequently affected by noise and vibration. The rate of positive responses in the visual, respiratory, cardiovascular, digestive and nervous systems, sleep disturbances and emotional disturbances increased accordingly as noise and vibration increased. Combined effects of noise and vibration stimuli on the total number of positive responses (an indicator of general health) were found. This study has produced results indicating that the maximum permissible noise level should not exceed 70 dB(A) in the residential areas along the Shinkansen railway.

  16. Improved Criteria for Acceptable Yield Point Elongation in Surface Critical Steels

    SciTech Connect

    Dr. David Matlock; Dr. John Speer

    2007-05-30

    Yield point elongation (YPE) is considered undesirable in surface critical applications where steel is formed since "strain lines" or Luders bands are created during forming. This project will examine in detail the formation of luders bands in industrially relevant strain states including the influence of substrate properties and coatings on Luders appearance. Mechanical testing and surface profilometry were the primary methods of investigation.

  17. Nutritional Criteria for Military Rations and Effects of Prolonged Feeding on Acceptability

    NASA Technical Reports Server (NTRS)

    Schnakenberg, D.

    1985-01-01

    Broad nutritional policies for operational rations are designed to insure that the nutritional content of the rations served will sustain combat effectiveness. Concern exists that these rations, although nutritionally complete, would become monotonous because of limited variety causing nutrient intake to decrease and body weight losses to occur with adverse effects on morale and combat effectiveness. Whenever possible, troops are now fed one or two hot meals per day containing fresh foods and a much greater variety of foods than are available in packaged rations. A laboratory test was conducted with student volunteers and the results are discussed.

  18. 78 FR 38411 - Vogtle Electric Generating Plant, Unit 4; Inspections, Tests, Analyses, and Acceptance Criteria

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-26

    ... of the following methods: Federal Rulemaking Web site: Go to http://www.regulations.gov and search... select ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the NRC's Public... will be reflected on the NRC's Web site at...

  19. 78 FR 65007 - Inspections, Tests, Analyses, and Acceptance Criteria; Vogtle Electric Generating Plant, Unit 3

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-30

    ...-available information related to this action by the following methods: Federal Rulemaking Web site: Go to..., select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with... updates to the status of this ITAAC will be reflected on the NRC's Web site at...

  20. Microneedle characterisation: the need for universal acceptance criteria and GMP specifications when moving towards commercialisation.

    PubMed

    Lutton, Rebecca E M; Moore, Jessica; Larrañeta, Eneko; Ligett, Stephen; Woolfson, A David; Donnelly, Ryan F

    2015-08-01

    With interest in microneedles as a novel drug transdermal delivery system increasing rapidly since the late 1990s (Margetts and Sawyer Contin Educ Anaesthesia Crit Care Pain. 7(5):171-76, 2007), a diverse range of microneedle systems have been fabricated with varying designs and dimensions. However, there are still very few commercially available microneedle products. One major issue regarding microneedle manufacture on an industrial scale is the lack of specific quality standards for this novel dosage form in the context of Good Manufacturing Practice (GMP). A range of mechanical characterisation tests and microneedle insertion analysis techniques are used by researchers working on microneedle systems to assess the safety and performance profiles of their various designs. The lack of standardised tests and equipment used to demonstrate microneedle mechanical properties and insertion capability makes it difficult to directly compare the in use performance of candidate systems. This review highlights the mechanical tests and insertion analytical techniques used by various groups to characterise microneedles. This in turn exposes the urgent need for consistency across the range of microneedle systems in order to promote innovation and the successful commercialisation of microneedle products.

  1. Acceptability of Online Degrees as Criteria for Admission to Graduate Programs

    ERIC Educational Resources Information Center

    DeFleur, Margaret H.; Adams, Jonathan

    2004-01-01

    This paper presents the results of a nationwide survey of deans, associate deans, and directors who make recommendations concerning the admission of applicants to graduate programs in their colleges and universities. A questionnaire was sent to a sample of academic officers in public and private institutions describing three different types of…

  2. 46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation Device... which differ in any way, e.g., size, material composition, construction, may utilize the same... the case of textiles. (5) The request must include a list of all materials used in the construction...

  3. 46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation Device... which differ in any way, e.g., size, material composition, construction, may utilize the same... the case of textiles. (5) The request must include a list of all materials used in the construction...

  4. 46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation Device... which differ in any way, e.g., size, material composition, construction, may utilize the same... the case of textiles. (5) The request must include a list of all materials used in the construction...

  5. 46 CFR 164.019-5 - Standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation Device... provided for standard components that are under the quality control oversight program of a recognized... components used in the construction of PFDs must meet the applicable requirements of this part or part...

  6. 46 CFR 164.019-5 - Standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation Device... provided for standard components that are under the quality control oversight program of a recognized... components used in the construction of PFDs must meet the applicable requirements of this part or part...

  7. 46 CFR 164.019-5 - Standard components; acceptance criteria and procedures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation Device... provided for standard components that are under the quality control oversight program of a recognized... components used in the construction of PFDs must meet the applicable requirements of this part or part...

  8. 76 FR 27925 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-13

    ... COMMISSION 10 CFR Parts 2 and 52 RIN 3150-AI77 Requirements for Maintenance of Inspections, Tests, Analyses... maintenance period. Most recently, the NRC held two public meetings in March 2010 to discuss draft proposed... provides guidance to verify licensees have implemented ITAAC maintenance programs to ensure that...

  9. Comparison of Accreditation Criteria: CBHDP, NLN, and COA Accreditation Criteria.

    ERIC Educational Resources Information Center

    Frels, Lois; Horton, Betty

    1991-01-01

    Presents a detailed comparison of similarities and differences in the accreditation criteria of two nursing accrediting agencies--the National League for Nursing and the Council on Accreditation--as they relate to nurse anesthesiology programs. (JOW)

  10. Detection methods and performance criteria for genetically modified organisms.

    PubMed

    Bertheau, Yves; Diolez, Annick; Kobilinsky, André; Magin, Kimberly

    2002-01-01

    Detection methods for genetically modified organisms (GMOs) are necessary for many applications, from seed purity assessment to compliance of food labeling in several countries. Numerous analytical methods are currently used or under development to support these needs. The currently used methods are bioassays and protein- and DNA-based detection protocols. To avoid discrepancy of results between such largely different methods and, for instance, the potential resulting legal actions, compatibility of the methods is urgently needed. Performance criteria of methods allow evaluation against a common standard. The more-common performance criteria for detection methods are precision, accuracy, sensitivity, and specificity, which together specifically address other terms used to describe the performance of a method, such as applicability, selectivity, calibration, trueness, precision, recovery, operating range, limit of quantitation, limit of detection, and ruggedness. Performance criteria should provide objective tools to accept or reject specific methods, to validate them, to ensure compatibility between validated methods, and be used on a routine basis to reject data outside an acceptable range of variability. When selecting a method of detection, it is also important to consider its applicability, its field of applications, and its limitations, by including factors such as its ability to detect the target analyte in a given matrix, the duration of the analyses, its cost effectiveness, and the necessary sample sizes for testing. Thus, the current GMO detection methods should be evaluated against a common set of performance criteria.

  11. Axelrod model: accepting or discussing

    NASA Astrophysics Data System (ADS)

    Dybiec, Bartlomiej; Mitarai, Namiko; Sneppen, Kim

    2012-10-01

    Agents building social systems are characterized by complex states, and interactions among individuals can align their opinions. The Axelrod model describes how local interactions can result in emergence of cultural domains. We propose two variants of the Axelrod model where local consensus is reached either by listening and accepting one of neighbors' opinion or two agents discuss their opinion and achieve an agreement with mixed opinions. We show that the local agreement rule affects the character of the transition between the single culture and the multiculture regimes.

  12. New diagnostic criteria for neurocysticercosis: Reliability and validity

    PubMed Central

    Fleury, Agnès; Romo, Matthew L.; Abraham, Ronaldo; Fandiño, Jaime; Durán, Juan C.; Cárdenas, Graciela; Moncayo, Jorge; Leite Rodrigues, Cleonísio; San‐Juan, Daniel; Serrano‐Dueñas, Marcos; Takayanagui, Oswaldo; Sander, Josemir W.

    2016-01-01

    Objective The diagnosis of neurocysticercosis (NCC) remains problematic because of the heterogeneity of its clinical, immunological, and imaging characteristics. Our aim was to develop and assess a new set of diagnostic criteria for NCC, which might allow for the accurate detection of, and differentiation between, parenchymal and extraparenchymal disease. Methods A group of Latin American NCC experts developed by consensus a new set of diagnostic criteria for NCC. A multicenter, retrospective study was then conducted to validate it. The reference standard for diagnosis of active NCC was the disappearance or reduction of cysts after anthelmintic treatment. In total, three pairs of independent neurologists blinded to the diagnosis evaluated 93 cases (with NCC) and 93 controls (without NCC) using the new diagnostic criteria. Mixed‐effects logistic regression models were used to estimate sensitivity and specificity. Results Inter‐rater reliability (kappa) of diagnosis among evaluators was 0.60. For diagnosis of NCC versus no NCC, the new criteria had a sensitivity of 93.2% and specificity of 81.4%. For parenchymal NCC, the new criteria had a sensitivity of 89.8% and specificity of 80.7% and for extraparenchymal NCC, the new criteria had a sensitivity of 65.9% and specificity of 94.9%. Interpretation These criteria have acceptable reliability and validity and could be a new tool for clinicians and researchers. An advantage of the new criteria is that they consider parasite location (ie, parenchymal or extraparenchymal), which is an important factor determining the clinical, immunological, and radiological presentation of the disease, and importantly, its treatment and prognosis. Ann Neurol 2016;80:434–442 PMID:27438337

  13. Launch Commit Criteria Monitoring Agent

    NASA Technical Reports Server (NTRS)

    Semmel, Glenn S.; Davis, Steven R.; Leucht, Kurt W.; Rowe, Dan A.; Kelly, Andrew O.; Boeloeni, Ladislau

    2005-01-01

    The Spaceport Processing Systems Branch at NASA Kennedy Space Center has developed and deployed a software agent to monitor the Space Shuttle's ground processing telemetry stream. The application, the Launch Commit Criteria Monitoring Agent, increases situational awareness for system and hardware engineers during Shuttle launch countdown. The agent provides autonomous monitoring of the telemetry stream, automatically alerts system engineers when predefined criteria have been met, identifies limit warnings and violations of launch commit criteria, aids Shuttle engineers through troubleshooting procedures, and provides additional insight to verify appropriate troubleshooting of problems by contractors. The agent has successfully detected launch commit criteria warnings and violations on a simulated playback data stream. Efficiency and safety are improved through increased automation.

  14. Determination of criteria weights in solving multi-criteria problems

    NASA Astrophysics Data System (ADS)

    Kasim, Maznah Mat

    2014-12-01

    A multi-criteria (MC) problem comprises of units to be analyzed under a set of evaluation criteria. Solving a MC problem is basically the process of finding the overall performance or overall quality of the units of analysis by using certain aggregation method. Based on these overall measures of each unit, a decision can be made whether to sort them, to select the best or to group them according to certain ranges. Prior to solving the MC problems, the weights of the related criteria have to be determined with the assumption that the weights represent the degree of importance or the degree of contribution towards the overall performance of the units. This paper presents two main approaches which are called as subjective and objective approaches, where the first one involves evaluator(s) while the latter approach depends on the intrinsic information contained in each criterion. The subjective and objective weights are defined if the criteria are assumed to be independent with each other, but if they are dependent, there is another type of weight, which is called as monotone measure weight or compound weights which represent degree of interaction among the criteria. The measure of individual weights or compound weights must be addressed in solving multi-criteria problems so that the solutions are more reliable since in the real world, evaluation criteria always come with different degree of importance or are dependent with each other. As the real MC problems have their own uniqueness, it is up to the decision maker(s) to decide which type of weights and which method are the most applicable ones for the problem under study.

  15. Criteria for phonological process analysis.

    PubMed

    McReynolds, L V; Elbert, M

    1981-05-01

    Investigators have proposed that children with functional articulation disorders should be relabelled phonologically disordered. To support this proposal, evidence has been presented in the literature demonstrating that children's error patterns reflect the operation of phonological processes. No quantitative or qualitative criteria have been offered to differentiate these processes from surface error patterns. The purpose of the present descriptive study was to determine if differences would be found when two kinds of process analyses were employed: a nonquantitative criteria analysis as conducted in the studies reported in the literature, and a quantitative criteria analysis. Speech samples were obtained from 13 children with functional articulation problems. Their errors were submitted to the two analysis procedures. Results indicated that the number of identified processes were reduced when minimum quantitative criteria were used from the number identified when no quantitative criteria were imposed. The decrease occurred in individual children's patterns as well as across the patterns of the 13 children. It is suggested that there is a need to establish reasonable quantitative and qualitative criteria for phonological process identification.

  16. Hepatocellular carcinoma beyond Milan criteria: Management and transplant selection criteria

    PubMed Central

    Elshamy, Mohammed; Aucejo, Federico; Menon, K V Narayanan; Eghtesad, Bijan

    2016-01-01

    Liver transplantation (LT) for hepatocellular carcinoma (HCC) has been established as a standard treatment in selected patients for the last two and a half decades. After initially dismal outcomes, the Milan criteria (MC) (single HCC ≤ 5 cm or up to 3 HCCs ≤ 3 cm) have been adopted worldwide to select HCC patients for LT, however cumulative experience has shown that MC can be too strict. This has led to the development of numerous expanded criteria worldwide. Morphometric expansions on MC as well as various criteria which incorporate biomarkers as surrogates of tumor biology have been described. HCC that presents beyond MC initially can be downstaged with locoregional therapy (LRT). Post-LRT monitoring aims to identify candidates with favorable tumor behavior. Similarly, tumor marker levels as response to LRT has been utilized as surrogate of tumor biology. Molecular signatures of HCC have also been correlated to outcomes; these have yet to be incorporated into HCC-LT selection criteria formally. The ongoing discrepancy between organ demand and supply makes patient selection the most challenging element of organ allocation. Further validation of extended HCC-LT criteria models and pre-LT treatment strategies are required. PMID:27478537

  17. A Preliminary Investigation of Acceptance and Commitment Therapy as a Treatment for Marijuana Dependence in Adults

    ERIC Educational Resources Information Center

    Twohig, Michael P.; Shoenberger, Deacon; Hayes, Steven C.

    2007-01-01

    In this investigation, 3 adults who met criteria for marijuana dependence were treated using an abbreviated version of acceptance and commitment therapy (ACT). The treatment was delivered in eight weekly 90-min individual sessions. The effects of the intervention were assessed using a nonconcurrent multiple baseline across participants design.…

  18. Studying Student Teachers' Acceptance of Role Responsibility.

    ERIC Educational Resources Information Center

    Davis, Michael D.; Davis, Concetta M.

    1980-01-01

    There is variance in the way in which student teachers accept responsibility for the teaching act. This study explains why some variables may affect student teachers' acceptance of role responsibilities. (CM)

  19. [Subjective well-being and self acceptance].

    PubMed

    Makino, Y; Tagami, F

    1998-06-01

    The purpose of the present study was to examine the relationship between subjective well-being and self acceptance, and to design a happiness self-writing program to increase self acceptance and subjective well-being of adolescents. In study 1, we examined the relationship between social interaction and self acceptance. In study 2, we created a happiness self-writing program in cognitive behavioral approach, and examined whether the program promoted self acceptance and subjective well-being. Results indicated that acceptance of self-openness, an aspect of self acceptance, was related to subjective well-being. The happiness self-writing program increased subjective well-being, but it was not found to have increased self acceptance. It was discussed why the program could promote subjective well-being, but not self acceptance.

  20. Special Analysis: Updated Analysis of the Effect of Wood Products on Trench Disposal Limits at the E-Area Low-Level Waste Facility

    SciTech Connect

    Cook, J.R.

    2001-02-20

    This Special Analysis (SA) develops revised radionuclide inventory limits for trench disposal of low-level radioactive waste in the presence of wood products in the E-Area Low-Level Waste Facility. These limits should be used to modify the Waste Acceptance Criteria (WAC) for trench disposal. Because the work on which this SA is based employed data from tests using 100 percent wood products, the 40 percent limitation on wood products for trench (i.e., slit or engineered trench) disposal is not needed in the modified WAC.

  1. Characterization Results for the 2014 HTF 3H & 2H Evaporator Overhead Samples

    SciTech Connect

    Washington, A.

    2015-05-11

    This report tabulates the radiochemical analysis of the 3H and 2H evaporator overhead samples for 137Cs, 90Sr, and 129I to meet the requirements in the Effluent Treatment Project (ETP) Waste Acceptance Criteria (WAC) (rev. 6). This report identifies the sample receipt date, preparation method, and analysis performed in the accumulation of the listed values. All data was found to be within the ETP WAC (rev. 6) specification for the Waste Water Collection Tanks (WWCT).

  2. 48 CFR 2911.103 - Market acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Market acceptance. 2911... DESCRIBING AGENCY NEEDS Selecting And Developing Requirements Documents 2911.103 Market acceptance. The... offered have either achieved commercial market acceptance or been satisfactorily supplied to an...

  3. 48 CFR 11.103 - Market acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Market acceptance. 11.103... DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 11.103 Market acceptance. (a) Section... either— (i) Achieved commercial market acceptance; or (ii) Been satisfactorily supplied to an...

  4. Older Adults' Acceptance of Information Technology

    ERIC Educational Resources Information Center

    Wang, Lin; Rau, Pei-Luen Patrick; Salvendy, Gavriel

    2011-01-01

    This study investigated variables contributing to older adults' information technology acceptance through a survey, which was used to find factors explaining and predicting older adults' information technology acceptance behaviors. Four factors, including needs satisfaction, perceived usability, support availability, and public acceptance, were…

  5. 46 CFR 28.73 - Accepted organizations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Accepted organizations. 28.73 Section 28.73 Shipping... INDUSTRY VESSELS General Provisions § 28.73 Accepted organizations. An organization desiring to be designated by the Commandant as an accepted organization must request such designation in writing. As...

  6. 46 CFR 28.73 - Accepted organizations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Accepted organizations. 28.73 Section 28.73 Shipping... INDUSTRY VESSELS General Provisions § 28.73 Accepted organizations. An organization desiring to be designated by the Commandant as an accepted organization must request such designation in writing. As...

  7. 46 CFR 28.73 - Accepted organizations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 1 2013-10-01 2013-10-01 false Accepted organizations. 28.73 Section 28.73 Shipping... INDUSTRY VESSELS General Provisions § 28.73 Accepted organizations. An organization desiring to be designated by the Commandant as an accepted organization must request such designation in writing. As...

  8. 46 CFR 28.73 - Accepted organizations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Accepted organizations. 28.73 Section 28.73 Shipping... INDUSTRY VESSELS General Provisions § 28.73 Accepted organizations. An organization desiring to be designated by the Commandant as an accepted organization must request such designation in writing. As...

  9. 46 CFR 28.73 - Accepted organizations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Accepted organizations. 28.73 Section 28.73 Shipping... INDUSTRY VESSELS General Provisions § 28.73 Accepted organizations. An organization desiring to be designated by the Commandant as an accepted organization must request such designation in writing. As...

  10. 48 CFR 2911.103 - Market acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... offered have either achieved commercial market acceptance or been satisfactorily supplied to an agency... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Market acceptance. 2911... DESCRIBING AGENCY NEEDS Selecting And Developing Requirements Documents 2911.103 Market acceptance....

  11. 21 CFR 820.86 - Acceptance status.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Acceptance status. 820.86 Section 820.86 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES QUALITY SYSTEM REGULATION Acceptance Activities § 820.86 Acceptance status. Each manufacturer...

  12. 48 CFR 11.103 - Market acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Market acceptance. 11.103... DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 11.103 Market acceptance. (a) Section... either— (i) Achieved commercial market acceptance; or (ii) Been satisfactorily supplied to an...

  13. 48 CFR 11.103 - Market acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Market acceptance. 11.103... DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 11.103 Market acceptance. (a) 41 U.S...) Achieved commercial market acceptance; or (ii) Been satisfactorily supplied to an agency under current...

  14. 48 CFR 2911.103 - Market acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 7 2013-10-01 2012-10-01 true Market acceptance. 2911.103... DESCRIBING AGENCY NEEDS Selecting And Developing Requirements Documents 2911.103 Market acceptance. The... offered have either achieved commercial market acceptance or been satisfactorily supplied to an...

  15. 48 CFR 11.103 - Market acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Market acceptance. 11.103... DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 11.103 Market acceptance. (a) Section... either— (i) Achieved commercial market acceptance; or (ii) Been satisfactorily supplied to an...

  16. 48 CFR 2911.103 - Market acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 7 2012-10-01 2012-10-01 false Market acceptance. 2911... DESCRIBING AGENCY NEEDS Selecting And Developing Requirements Documents 2911.103 Market acceptance. The... offered have either achieved commercial market acceptance or been satisfactorily supplied to an...

  17. 48 CFR 2911.103 - Market acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 7 2014-10-01 2014-10-01 false Market acceptance. 2911... DESCRIBING AGENCY NEEDS Selecting And Developing Requirements Documents 2911.103 Market acceptance. The... offered have either achieved commercial market acceptance or been satisfactorily supplied to an...

  18. The relation between remembered parental acceptance in childhood and self-acceptance among young Turkish adults.

    PubMed

    Kuyumcu, Behire; Rohner, Ronald P

    2016-05-11

    This study examined the relation between young adults' age and remembrances of parental acceptance in childhood, and their current self-acceptance. The study was based on a sample of 236 young adults in Turkey (139 women and 97 men). The adult version of the Parental Acceptance-Rejection/Control Questionnaire for mothers and fathers along with the Self-Acceptance subscale of the Psychological Well-Being Scale, and the Personal Information Form were used as measures. Results showed that both men and women tended to remember having been accepted in childhood by both their mothers and fathers. Women, however, reported more maternal and paternal acceptance in childhood than did men. Similarly, the level of self-acceptance was high among both men and women. However, women's self-acceptance was higher than men's. Correlational analyses showed that self-acceptance was positively related to remembrances of maternal and paternal acceptance among both women and men. Results indicated that age and remembered paternal acceptance significantly predicted women's self-acceptance. Age and remembered maternal acceptance made significant and independent contributions to men's self-acceptance. Men's remembrances of paternal acceptance in childhood did not make significant contribution to their self-acceptance. Finally, the relation between women's age and self-acceptance was significantly moderated by remembrances of paternal acceptance in childhood.

  19. Quality criteria for water, 1986

    SciTech Connect

    Not Available

    1986-05-01

    Section 304(a) (1) of the Clean Water Act 33 U.S.C. 1314(a) (1) requires the Environmental Protection Agency (EPA) to publish and periodically update ambient water-quality criteria. These criteria are to accurately reflect the latest scientific knowledge (a) on the kind and extent of all identifiable effects on health and welfare including, but not limited to, plankton, fish shellfish, wildlife, plant life, shorelines, beaches, aesthetics, and recreation that may be expected from the presence of pollutants in any body of water including ground water; (b) on the concentration and dispersal of pollutants, or their byproducts, through biological, physical, and chemical processes; and (c) on the effects of pollutants on biological community diversity, productivity, and stability, including information on the factors affecting rates of eutrophication and organic and inorganic sedimentation for varying types of receiving waters. In a continuing effort to provide those who use EPA's water-quality and human-health criteria with up-to-date criteria values and associated information, the document was assembled. The document includes summaries of all the contaminants for which EPA has developed criteria recommendations.

  20. Photovoltaic system criteria documents. Volume 6: Criteria for auditing photovoltaic system applications and experiments. Revision A

    NASA Technical Reports Server (NTRS)

    Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

    1980-01-01

    The criteria is defined for auditing photovoltaic system applications and experiments. The purpose of the audit is twofold: to see if the application is meeting its stated objectives and to measure the application's progress in terms of the National Photovoltaic Program's goals of performance, cost, reliability, safety, and socio-environmental acceptance. The information obtained from an audit will be used to assess the status of an application and to provide the Department of Energy with recommendations on the future conduct of the application. Those aspects are covered of a site audit necessary to produce a systematic method for the gathering of qualitative and quantitative data to measure the success of an application. A sequence of audit events and guidelines for obtaining the required information is presented.

  1. Radiation design criteria handbook. [design criteria for electronic parts applications

    NASA Technical Reports Server (NTRS)

    Stanley, A. G.; Martin, K. E.; Douglas, S.

    1976-01-01

    Radiation design criteria for electronic parts applications in space environments are provided. The data were compiled from the Mariner/Jupiter Saturn 1977 electronic parts radiation test program. Radiation sensitive device types were exposed to radiation environments compatible with the MJS'77 requirements under suitable bias conditions. A total of 189 integrated circuits, transistors, and other semiconductor device types were tested.

  2. FFTF fuel systems design criteria

    SciTech Connect

    Dutt, D.S.; Baars, R.E.; Jackson, R.J.; Weber, J.W.

    1980-01-01

    The purpose of this paper is to first enumerate the design considerations that were given to the fuel system, then secondly, show how these design allowances, methods, and criteria compare to the subsequent irradiation data. This comparison will show that decisions made by the design team were generally correct and, if in error, tended to be conservative. The FFTF driver fuel assemblies addressed by this paper are composed of the duct, a spacer system, and 217 fuel pins. Each of these subcomponents is described as the criteria are discussed and important parameters noted.

  3. Defining Clinical Response Criteria and Early Response Criteria for Precision Oncology: Current State-of-the-Art and Future Perspectives

    PubMed Central

    Subbiah, Vivek; Chuang, Hubert H.; Gambhire, Dhiraj; Kairemo, Kalevi

    2017-01-01

    In this era of precision oncology, there has been an exponential growth in the armamentarium of genomically targeted therapies and immunotherapies. Evaluating early responses to precision therapy is essential for “go” versus “no go” decisions for these molecularly targeted drugs and agents that arm the immune system. Many different response assessment criteria exist for use in solid tumors and lymphomas. We reviewed the literature using the Medline/PubMed database for keywords “response assessment” and various known response assessment criteria published up to 2016. In this article we review the commonly used response assessment criteria. We present a decision tree to facilitate selection of appropriate criteria. We also suggest methods for standardization of various response assessment criteria. The relevant response assessment criteria were further studied for rational of development, key features, proposed use and acceptance by various entities. We also discuss early response evaluation and provide specific case studies of early response to targeted therapy. With high-throughput, advanced computing programs and digital data-mining it is now possible to acquire vast amount of high quality imaging data opening up a new field of “omics in radiology”—radiomics that complements genomics for personalized medicine. Radiomics is rapidly evolving and is still in the research arena. This cutting-edge technology is poised to move soon to the mainstream clinical arena. Novel agents with new mechanisms of action require advanced molecular imaging as imaging biomarkers. There is an urgent need for development of standardized early response assessment criteria for evaluation of response to precision therapy. PMID:28212290

  4. Defining Clinical Response Criteria and Early Response Criteria for Precision Oncology: Current State-of-the-Art and Future Perspectives.

    PubMed

    Subbiah, Vivek; Chuang, Hubert H; Gambhire, Dhiraj; Kairemo, Kalevi

    2017-02-15

    In this era of precision oncology, there has been an exponential growth in the armamentarium of genomically targeted therapies and immunotherapies. Evaluating early responses to precision therapy is essential for "go" versus "no go" decisions for these molecularly targeted drugs and agents that arm the immune system. Many different response assessment criteria exist for use in solid tumors and lymphomas. We reviewed the literature using the Medline/PubMed database for keywords "response assessment" and various known response assessment criteria published up to 2016. In this article we review the commonly used response assessment criteria. We present a decision tree to facilitate selection of appropriate criteria. We also suggest methods for standardization of various response assessment criteria. The relevant response assessment criteria were further studied for rational of development, key features, proposed use and acceptance by various entities. We also discuss early response evaluation and provide specific case studies of early response to targeted therapy. With high-throughput, advanced computing programs and digital data-mining it is now possible to acquire vast amount of high quality imaging data opening up a new field of "omics in radiology"-radiomics that complements genomics for personalized medicine. Radiomics is rapidly evolving and is still in the research arena. This cutting-edge technology is poised to move soon to the mainstream clinical arena. Novel agents with new mechanisms of action require advanced molecular imaging as imaging biomarkers. There is an urgent need for development of standardized early response assessment criteria for evaluation of response to precision therapy.

  5. Acceptability of GM foods among Pakistani consumers.

    PubMed

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-04-02

    In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers.

  6. [About the introduction the criteria of brain death in Poland in 1984].

    PubMed

    Paprocka-Lipińska, Anna

    2016-09-29

    Significant recovery of discussion about the need for the formulation of criteria of death was provoked due to the progress of medicine. Development of anaesthesiology and intensive therapy, introduction of new resuscitation techniques and devices, which are increasingly better able to maintain and sometimes even replace functions of the respiratory or cardiovascular system, which are essential for the survival meant that existing for centuries, socially accepted classical criteria of death, based on cessation of breath and circulation, are no longer sufficient. The criteria of brain death developed by the Ad Hoc Committee - 12-experts commission at Harvard University, published in Journal of American Medical Association in August 1968 and were the breaking point. The concept has been adopted and accepted by society in many countries soon, while in Poland the process of formulating and introduction of criteria for brain death took much more time. Based on the available literature and preserved archival materials, this article describing the process of development of new death criteria, acceptance by the National Team of Specialists and publication in 1984 the announcement by the Minister of Health and Social Welfare about the criteria of brain death.

  7. Early Site Permit Demonstration Program: Regulatory criteria evaluation report

    SciTech Connect

    Not Available

    1993-03-01

    The primary objective of the ESPDP is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. The results of the technical and licensing evaluations are presented in this report. The purpose, background, and organization of the ESPDP is delineated in Section 1. Section 11 contains flowcharts defining siting application requirements, environmental report requirements, and emergency planning/preparedness requirements for ALWRS. The licensing and technical review results are presented in Section III.

  8. Consumer Acceptability of Intramuscular Fat

    PubMed Central

    Frank, Damian; Joo, Seon-Tea

    2016-01-01

    Fat in meat greatly improves eating quality, yet many consumers avoid visible fat, mainly because of health concerns. Generations of consumers, especially in the English-speaking world, have been convinced by health authorities that animal fat, particularly saturated or solid fat, should be reduced or avoided to maintain a healthy diet. Decades of negative messages regarding animal fats has resulted in general avoidance of fatty cuts of meat. Paradoxically, low fat or lean meat tends to have poor eating quality and flavor and low consumer acceptability. The failure of low-fat high-carbohydrate diets to curb “globesity” has prompted many experts to re-evaluate of the place of fat in human diets, including animal fat. Attitudes towards fat vary dramatically between and within cultures. Previous generations of humans sought out fatty cuts of meat for their superior sensory properties. Many consumers in East and Southeast Asia have traditionally valued more fatty meat cuts. As nutritional messages around dietary fat change, there is evidence that attitudes towards animal fat are changing and many consumers are rediscovering and embracing fattier cuts of meat, including marbled beef. The present work provides a short overview of the unique sensory characteristics of marbled beef and changing consumer preferences for fat in meat in general. PMID:28115880

  9. Acceptance in Romantic Relationships: The Frequency and Acceptability of Partner Behavior Inventory

    ERIC Educational Resources Information Center

    Doss, Brian D.; Christensen, Andrew

    2006-01-01

    Despite the recent emphasis on acceptance in romantic relationships, no validated measure of relationship acceptance presently exists. To fill this gap, the 20-item Frequency and Acceptability of Partner Behavior Inventory (FAPBI; A. Christensen & N. S. Jacobson, 1997) was created to assess separately the acceptability and frequency of both…

  10. Aquatic Plant Water Quality Criteria

    EPA Science Inventory

    The USEPA, as stated in the Clean Water Act, is tasked with developing numerical Aquatic Life Critiera for various pollutants found in the waters of the United States. These criteria serve as guidance for States and Tribes to use in developing their water quality standards. The G...

  11. THE CONTINUING SEARCH FOR CRITERIA.

    ERIC Educational Resources Information Center

    BROUDY, H.S.

    EDUCATIONAL CONTROL OF THE PUBLIC SCHOOLS RESTS ON THE ASSUMPTION THAT THERE IS A SUBSTANTIVE BODY OF KNOWLEDGE ABOUT TEACHING FOR WHICH PROFESSIONAL PREPARATION IS NECESSARY. IF SO, THE TEACHER MUST BE EVALUATED NOT AS A PERSON BUT AS A FUNCTIONARY IN A SPECIAL SITUATION (THE CLASSROOM). FOR THAT PURPOSE, CRITERIA ARE NECESSARY. PERSONALITY…

  12. Aversive Stimulation -- Criteria for Application.

    ERIC Educational Resources Information Center

    O'Donnell, Patrick A.; Ohlson, Glenn A.

    Criteria for applying aversive stimulation with severely handicapped children are examined, and practical and ethical issues are considered. Factors seen to influence punishment outcomes include timing, intensity, and schedule of reinforcement. Suggested is the need for further research on the comparative effectiveness of positive and negative…

  13. 7 CFR 1494.1101 - Criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false Criteria. 1494.1101 Section 1494.1101 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF... Criteria § 1494.1101 Criteria. The criteria considered in evaluating and approving proposals for the...

  14. 46 CFR 385.51 - Criteria: Projects.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Criteria: Projects. 385.51 Section 385.51 Shipping... COOPERATIVE AGREEMENTS REGULATIONS Criteria for Award § 385.51 Criteria: Projects. The criteria to be used by MarAd in evaluating all projects prior to award of a grant or cooperative agreement are as follows:...

  15. 46 CFR 385.51 - Criteria: Projects.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Criteria: Projects. 385.51 Section 385.51 Shipping... COOPERATIVE AGREEMENTS REGULATIONS Criteria for Award § 385.51 Criteria: Projects. The criteria to be used by MarAd in evaluating all projects prior to award of a grant or cooperative agreement are as follows:...

  16. 46 CFR 385.51 - Criteria: Projects.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Criteria: Projects. 385.51 Section 385.51 Shipping... COOPERATIVE AGREEMENTS REGULATIONS Criteria for Award § 385.51 Criteria: Projects. The criteria to be used by MarAd in evaluating all projects prior to award of a grant or cooperative agreement are as follows:...

  17. 40 CFR 258.24 - Air criteria.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Air criteria. 258.24 Section 258.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS Operating Criteria § 258.24 Air criteria. (a) Owners or operators of all...

  18. 42 CFR 505.5 - Loan criteria.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Loan criteria. 505.5 Section 505.5 Public Health... INFRASTRUCTURE IMPROVEMENT PROGRAM ESTABLISHMENT OF THE HEALTH CARE INFRASTRUCTURE IMPROVEMENT PROGRAM Loan Criteria § 505.5 Loan criteria. (a) Qualifying criteria. To qualify for the loan program, the...

  19. 42 CFR 505.5 - Loan criteria.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 5 2012-10-01 2012-10-01 false Loan criteria. 505.5 Section 505.5 Public Health... INFRASTRUCTURE IMPROVEMENT PROGRAM ESTABLISHMENT OF THE HEALTH CARE INFRASTRUCTURE IMPROVEMENT PROGRAM Loan Criteria § 505.5 Loan criteria. (a) Qualifying criteria. To qualify for the loan program, the...

  20. 40 CFR 258.24 - Air criteria.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Air criteria. 258.24 Section 258.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS Operating Criteria § 258.24 Air criteria. (a) Owners or operators of all...

  1. 40 CFR 258.24 - Air criteria.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Air criteria. 258.24 Section 258.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS Operating Criteria § 258.24 Air criteria. (a) Owners or operators of all...

  2. Acceptance and Avoidance Processes at Different Levels of Psychological Recovery from Enduring Mental Illness

    PubMed Central

    Siqueira, Vinicius R.; Oades, Lindsay G.

    2015-01-01

    Objective. This study examined the use of psychological acceptance and experiential avoidance, two key concepts of Acceptance and Commitment Therapy (ACT), in the psychological recovery process of people with enduring mental illness. Method. Sixty-seven participants were recruited from the metropolitan, regional, and rural areas of New South Wales, Australia. They all presented some form of chronic mental illness (at least 12 months) as reflected in DSM-IV Axis I diagnostic criteria. The Acceptance and Action Questionnaire (AAQ-19) was used to measure the presence of psychological acceptance and experiential avoidance; the Recovery Assessment Scale (RAS) was used to examine the levels of psychological recovery; and the Scales of Psychological Well-Being was used to observe if there are benefits in utilizing psychological acceptance and experiential avoidance in the recovery process. Results. An analysis of objectively quantifiable measures found no clear correlation between the use of psychological acceptance and recovery in mental illness as measured by the RAS. The data, however, showed a relationship between psychological acceptance and some components of recovery, thereby demonstrating its possible value in the recovery process. Conclusion. The major contribution of this research was the emerging correlation that was observed between psychological acceptance and positive levels of psychological well-being among individuals with mental illness. PMID:26576412

  3. Beyond the security paradox: Ten criteria for a socially informed security policy.

    PubMed

    Pavone, Vincenzo; Ball, Kirstie; Degli Esposti, Sara; Dibb, Sally; Santiago-Gómez, Elvira

    2017-04-01

    This article investigates the normative and procedural criteria adopted by European citizens to assess the acceptability of surveillance-oriented security technologies. It draws on qualitative data gathered at 12 citizen summits in nine European countries. The analysis identifies 10 criteria, generated by citizens themselves, for a socially informed security policy. These criteria not only reveal the conditions, purposes and operation rules that would make current European security policies and technologies more consistent with citizens' priorities. They also cast light on an interesting paradox: although people feel safe in their daily lives, they believe security could, and should, be improved.

  4. Screening criteria for microbial for processes

    SciTech Connect

    Bryant, R.S.

    1990-12-01

    The National Institute for Petroleum and Energy Research (NIPER) has maintained a microbial enhanced oil recovery (MEOR) field project data base since 1985. One of the major goals of this data base is to continue to document characteristics of reservoirs used for MEOR field projects and to assist the US Department of Energy by revising published screening criteria for MEOR processes. Since the last update of this data base in 1987, the number of MEOR field projects entered has increased from 39 to 65. Microbial EOR has been recognized as a potentially cost-effective method, particularly for stripper well production. Stripper wells are particularly in need of cost-effective EOR because independent operators produce about 40% of the total oil recovered, but cannot conduct needed EOR research. Microbial methods for improving oil recovery are potentially cost-effective and particularly well suited to be applied in today's economic climate. The lower price of crude oil as well as a more general acceptance of use of biotechnological processes has probably contributed to this increase. Although in some instances information was unavailable or not reported for each element of the data base, there exists adequate data to demonstrate both the viability and variety of options for using microbial technology for improved oil production. this report updates the data base and provides summary of several of the more important MEOR field experiments conducted during the 1970s and 1980s. 19 refs., 1 fig., 11 tabs.

  5. Development of appropriateness explicit criteria for cataract extraction by phacoemulsification

    PubMed Central

    Ma Quintana, José; Escobar, Antonio; Aróstegui, Inmaculada

    2006-01-01

    Background Consensus development techniques were used in the late 1980s to create explicit criteria for the appropriateness of cataract extraction. We developed a new appropriateness of indications tool for cataract following the RAND method. We tested the validity of our panel results. Methods Criteria were developed using a modified Delphi panel judgment process. A panel of 12 ophthalmologists was assembled. Ratings were analyzed regarding the level of agreement among panelists. We studied the influence of all variables on the final panel score using linear and logistic regression models. The explicit criteria developed were summarized by classification and regression tree analysis. Results Of the 765 indications evaluated by the main panel in the second round, 32.9% were found appropriate, 30.1% uncertain, and 37% inappropriate. Agreement was found in 53% of the indications and disagreement in 0.9%. Seven variables were considered to create the indications and divided into three groups: simple cataract, with diabetic retinopathy, or with other ocular pathologies. The preoperative visual acuity in the cataractous eye and visual function were the variables that best explained the panel scoring. The panel results were synthesized and presented in three decision trees. Misclassification error in the decision trees, as compared with the panel original criteria, was 5.3%. Conclusion The parameters tested showed acceptable validity for an evaluation tool. These results support the use of this indication algorithm as a screening tool for assessing the appropriateness of cataract extraction in field studies and for the development of practice guidelines. PMID:16512906

  6. 7 CFR 1207.323 - Acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan National Potato Promotion Board § 1207.323 Acceptance. Each...

  7. 7 CFR 1207.323 - Acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan National Potato Promotion Board § 1207.323 Acceptance. Each...

  8. 7 CFR 1207.323 - Acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan National Potato Promotion Board § 1207.323 Acceptance. Each...

  9. 7 CFR 1207.323 - Acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan National Potato Promotion Board § 1207.323 Acceptance. Each...

  10. 7 CFR 1207.323 - Acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan National Potato Promotion Board § 1207.323 Acceptance. Each...

  11. 7 CFR 932.32 - Acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Olive Administrative Committee § 932.32 Acceptance. Any person selected by the...

  12. 7 CFR 932.32 - Acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Olive Administrative Committee § 932.32 Acceptance. Any person selected by the...

  13. 7 CFR 932.32 - Acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Olive Administrative Committee § 932.32 Acceptance. Any person selected by the...

  14. 7 CFR 932.32 - Acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Olive Administrative Committee § 932.32 Acceptance. Any person selected by the...

  15. 7 CFR 932.32 - Acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Olive Administrative Committee § 932.32 Acceptance. Any person selected by the...

  16. 2013 SYR Accepted Poster Abstracts.

    PubMed

    2013-01-01

    SYR 2013 Accepted Poster abstracts: 1. Benefits of Yoga as a Wellness Practice in a Veterans Affairs (VA) Health Care Setting: If You Build It, Will They Come? 2. Yoga-based Psychotherapy Group With Urban Youth Exposed to Trauma. 3. Embodied Health: The Effects of a Mind�Body Course for Medical Students. 4. Interoceptive Awareness and Vegetable Intake After a Yoga and Stress Management Intervention. 5. Yoga Reduces Performance Anxiety in Adolescent Musicians. 6. Designing and Implementing a Therapeutic Yoga Program for Older Women With Knee Osteoarthritis. 7. Yoga and Life Skills Eating Disorder Prevention Among 5th Grade Females: A Controlled Trial. 8. A Randomized, Controlled Trial Comparing the Impact of Yoga and Physical Education on the Emotional and Behavioral Functioning of Middle School Children. 9. Feasibility of a Multisite, Community based Randomized Study of Yoga and Wellness Education for Women With Breast Cancer Undergoing Chemotherapy. 10. A Delphi Study for the Development of Protocol Guidelines for Yoga Interventions in Mental Health. 11. Impact Investigation of Breathwalk Daily Practice: Canada�India Collaborative Study. 12. Yoga Improves Distress, Fatigue, and Insomnia in Older Veteran Cancer Survivors: Results of a Pilot Study. 13. Assessment of Kundalini Mantra and Meditation as an Adjunctive Treatment With Mental Health Consumers. 14. Kundalini Yoga Therapy Versus Cognitive Behavior Therapy for Generalized Anxiety Disorder and Co-Occurring Mood Disorder. 15. Baseline Differences in Women Versus Men Initiating Yoga Programs to Aid Smoking Cessation: Quitting in Balance Versus QuitStrong. 16. Pranayam Practice: Impact on Focus and Everyday Life of Work and Relationships. 17. Participation in a Tailored Yoga Program is Associated With Improved Physical Health in Persons With Arthritis. 18. Effects of Yoga on Blood Pressure: Systematic Review and Meta-analysis. 19. A Quasi-experimental Trial of a Yoga based Intervention to Reduce Stress and

  17. Establishing endangered species recovery criteria using predictive simulation modeling

    USGS Publications Warehouse

    McGowan, Conor P.; Catlin, Daniel H.; Shaffer, Terry L.; Gratto-Trevor, Cheri L.; Aron, Carol

    2014-01-01

    Listing a species under the Endangered Species Act (ESA) and developing a recovery plan requires U.S. Fish and Wildlife Service to establish specific and measurable criteria for delisting. Generally, species are listed because they face (or are perceived to face) elevated risk of extinction due to issues such as habitat loss, invasive species, or other factors. Recovery plans identify recovery criteria that reduce extinction risk to an acceptable level. It logically follows that the recovery criteria, the defined conditions for removing a species from ESA protections, need to be closely related to extinction risk. Extinction probability is a population parameter estimated with a model that uses current demographic information to project the population into the future over a number of replicates, calculating the proportion of replicated populations that go extinct. We simulated extinction probabilities of piping plovers in the Great Plains and estimated the relationship between extinction probability and various demographic parameters. We tested the fit of regression models linking initial abundance, productivity, or population growth rate to extinction risk, and then, using the regression parameter estimates, determined the conditions required to reduce extinction probability to some pre-defined acceptable threshold. Binomial regression models with mean population growth rate and the natural log of initial abundance were the best predictors of extinction probability 50 years into the future. For example, based on our regression models, an initial abundance of approximately 2400 females with an expected mean population growth rate of 1.0 will limit extinction risk for piping plovers in the Great Plains to less than 0.048. Our method provides a straightforward way of developing specific and measurable recovery criteria linked directly to the core issue of extinction risk. Published by Elsevier Ltd.

  18. Survival of ART restorations assessed using selected FDI and modified ART restoration criteria.

    PubMed

    Farag, Abeer; van der Sanden, Wil J M; Abdelwahab, Hisran; Frencken, Jo E

    2011-06-01

    A new set of criteria for assessing the quality of restorations using modern restorative materials, named FDI criteria, was recently introduced. This study tested the null hypothesis that there is no significant difference in survival estimate percentages of ART restorations assessed using selected FDI and modified ART criteria after 1 and 5 years. One operator placed a total of 60 class I and 30 Class II high-viscosity glass-ionomer ART restorations in ninety 14- to 15-year-olds. Two calibrated and independent evaluators using both criteria evaluated restorations on diestone replicas at baseline and after 1 and 5 years. Statistical analyses were done using the Kaplan-Meier method and log-rank test. The survival results of ART restorations assessed using both sets of criteria after 1 and 5 years (p = 0.27) did not differ significantly. Three ART restorations were assessed as failures according to the ART criteria, while they were assessed as survived using the FDI criteria. We conclude that the modified ART criteria enable reliable assessment of ART restorations in permanent teeth from diestone replicas and that there was no significant difference in survival estimates of ART restorations assessed using both sets of criteria. The null hypothesis was accepted.

  19. Criteria for priority-setting in health care in Uganda: exploration of stakeholders' values.

    PubMed Central

    Kapiriri, Lydia; Norheim, Ole Frithjof

    2004-01-01

    OBJECTIVE: To explore stakeholders' acceptance of criteria for setting priorities for the health care system in Uganda. METHODS: A self-administered questionnaire was used. It was distributed to health workers, planners and administrators working in all levels of the Ugandan health care system. It was also distributed to members of the public. Participants were asked how strongly they agreed or disagreed with 18 criteria that could be used to set priorities for allocating health care. A total of 408 people took part. Data were entered and analysed using SPSS statistical software. Predetermined cut-off points were used to rank the criteria into three different categories: high weight (>66% of respondents agreed), average weight (33-66% of respondents agreed) and low weight (<33% of respondents agreed). We also tested for associations between respondents' characteristics and their degree of agreement with the criteria. FINDINGS: High-weight criteria included severity of disease, benefit of the intervention, cost of the intervention, cost-effectiveness of the intervention, quality of the data on effectiveness, the patients age, place of residence, lifestyle, importance of providing equity of access to health care and the community's views. The average-weight criteria included the patient's social status, mental features, physical capabilities, political views, responsibilities for others and gender. Low-weight criteria included the patient's religion, and power and influence. There were few associations between respondents' characteristics and their preferences. CONCLUSION: There was a high degree of acceptance for commonly used disease-related and society-related criteria. There was less agreement about the patient-related criteria. We propose that average-weight criteria should be debated in Uganda and other countries facing the challenge of distributing scarce health care resources. PMID:15112005

  20. In acceptance we trust? Conceptualising acceptance as a viable approach to NGO security management.

    PubMed

    Fast, Larissa A; Freeman, C Faith; O'Neill, Michael; Rowley, Elizabeth

    2013-04-01

    This paper documents current understanding of acceptance as a security management approach and explores issues and challenges non-governmental organisations (NGOs) confront when implementing an acceptance approach to security management. It argues that the failure of organisations to systematise and clearly articulate acceptance as a distinct security management approach and a lack of organisational policies and procedures concerning acceptance hinder its efficacy as a security management approach. The paper identifies key and cross-cutting components of acceptance that are critical to its effective implementation in order to advance a comprehensive and systematic concept of acceptance. The key components of acceptance illustrate how organisational and staff functions affect positively or negatively an organisation's acceptance, and include: an organisation's principles and mission, communications, negotiation, programming, relationships and networks, stakeholder and context analysis, staffing, and image. The paper contends that acceptance is linked not only to good programming, but also to overall organisational management and structures.

  1. Position paper: Seismic design criteria

    SciTech Connect

    Farnworth, S.K.

    1995-05-22

    The purpose of this paper is to document the seismic design criteria to be used on the Title 11 design of the underground double-shell waste storage tanks and appurtenant facilities of the Multi-Function Waste Tank Facility (MWTF) project, and to provide the history and methodologies for determining the recommended Design Basis Earthquake (DBE) Peak Ground Acceleration (PGA) anchors for site-specific seismic response spectra curves. Response spectra curves for use in design are provided in Appendix A.

  2. Neutron Detector Gamma Insensitivity Criteria

    SciTech Connect

    Kouzes, Richard T.; Ely, James H.; Lintereur, Azaree T.; Stephens, Daniel L.

    2009-10-21

    The shortage of 3He has triggered the search for an effective alternative neutron detection technology for radiation portal monitor applications. Any new detection technology must satisfy two basic criteria: 1) it must meet the neutron detection efficiency requirement, and 2) it must be insensitive to gamma ray interference at a prescribed level, while still meeting the neutron detection requirement. It is the purpose of this document to define this latter criterion.

  3. 78 FR 100 - Guidance for Industry and Food and Drug Administration Staff; Refuse To Accept Policy for 510(k)s...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-02

    ...; Refuse To Accept Policy for 510(k)s; Availability AGENCY: Food and Drug Administration, HHS. ACTION... entitled ``Refuse to Accept Policy for 510(k)s.'' The purpose of this document is to explain the procedures and criteria FDA intends to use in determining whether a 510(k) submission is...

  4. Wall thinning criteria for low temperature-low pressure piping. Task 91-030-1

    SciTech Connect

    Mertz, G.E.

    1993-01-01

    This acceptance criteria is intended to prevent gross rupture or rapidly propagating failure during normal and abnormal operating conditions. Pitting may be present in the carbon steel piping. While the acceptance criteria have provisions to preclude gross rupture through a pitted region, they do not protect against throughwall pit growth and subsequent leakage. Potential leakage through a pit in low pressure piping is less than the post-DBE design basis leakage. Both the uniform thinning and LTA criteria protect against leakage, since their potential for leakage is larger. The acceptance criteria protects against gross rupture due to general wall thinning, local wall thinning (LTA`s), pitting, and fracture through weld defects. General wall thinning calculations are based on the restart criteria, SEP-24. LTA criteria for hoop stresses are based on ASME Code Case N-480 {open_quotes}Examination Requirements for Pipe Wall Thinning Due to Single Phase Erosion and Corrosion{close_quotes}. The LTA criteria for axial stress is based on an effective average thickness concept, which prevents plastic collapse of a locally thinned pipe. Limits on pit density, based on an effective cross section concept, are used to prevent gross rupture through a group of pits. The CEGB R-6 failure assessment diagram is used in the fracture evaluation, along with postulated weld defects. This criteria is intended for low temperature, low pressure piping systems. Corrosion and/or weld defects increase the peak stresses during normal operation and may lead to a reduction in fatigue life. Piping systems subject to significant thermal or mechanical fatigue will require additional analysis which is beyond the scope of this document.

  5. The Predictive Value of Selection Criteria in an Urban Magnet School

    ERIC Educational Resources Information Center

    Lohmeier, Jill Hendrickson; Raad, Jennifer

    2012-01-01

    The predictive value of selection criteria on outcome data from two cohorts of students (Total N = 525) accepted to an urban magnet high school were evaluated. Regression analyses of typical screening variables (suspensions, absences, metropolitan achievement tests, middle school grade point averages [GPAs], Matrix Analogies test scores, and…

  6. 10 CFR 905.18 - What are the criteria for Western's approval of submittals?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... satisfactorily addresses the criteria in the regulations in this subpart; and (2) The reasonableness of the plan... customer. (b) Review of resource choices. Western will review resource choices using section 114 of EPAct...) Accepting plans and reports under other initiatives. If a customer or group of customers...

  7. User Acceptance of a Software Tool for Decision Making in IT Outsourcing: A Qualitative Study in Large Companies from Sweden

    NASA Astrophysics Data System (ADS)

    Andresen, Christoffer; Hodosi, Georg; Saprykina, Irina; Rusu, Lazar

    Decisions for IT outsourcing are very complex and needs to be supported by considerations based on many (multiple) criteria. In order to facilitate the use of a specific tool by a decision-maker in IT outsourcing, we need to find out whether such a tool for this purpose will be accepted or rejected or what improvements must be added to this tool to be accepted by some IT decision makers in large companies from Sweden.

  8. Heavy Metal, Religiosity, and Suicide Acceptability.

    ERIC Educational Resources Information Center

    Stack, Steven

    1998-01-01

    Reports on data taken from the General Social Survey that found a link between "heavy metal" rock fanship and suicide acceptability. Finds that relationship becomes nonsignificant once level of religiosity is controlled. Heavy metal fans are low in religiosity, which contributes to greater suicide acceptability. (Author/JDM)

  9. 48 CFR 411.103 - Market acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Market acceptance. 411.103... ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 411.103 Market... accordance with FAR 11.103(a), the market acceptability of their items to be offered. (b) The...

  10. 48 CFR 3011.103 - Market acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Market acceptance. 3011.103 Section 3011.103 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND... Developing Requirements Documents 3011.103 Market acceptance. (a) Contracting officers may act on behalf...

  11. 48 CFR 411.103 - Market acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Market acceptance. 411.103... ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 411.103 Market... accordance with FAR 11.103(a), the market acceptability of their items to be offered. (b) The...

  12. 48 CFR 3011.103 - Market acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Market acceptance. 3011.103 Section 3011.103 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND... Developing Requirements Documents 3011.103 Market acceptance. (a) Contracting officers may act on behalf...

  13. Consumer acceptance of ginseng food products.

    PubMed

    Chung, Hee Sook; Lee, Young-Chul; Rhee, Young Kyung; Lee, Soo-Yeun

    2011-01-01

    Ginseng has been utilized less in food products than in dietary supplements in the United States. Sensory acceptance of ginseng food products by U.S. consumers has not been reported. The objectives of this study were to: (1) determine the sensory acceptance of commercial ginseng food products and (2) assess influence of the addition of sweeteners to ginseng tea and ginseng extract to chocolate on consumer acceptance. Total of 126 consumers participated in 3 sessions for (1) 7 commercial red ginseng food products, (2) 10 ginseng teas varying in levels of sugar or honey, and (3) 10 ginseng milk or dark chocolates varying in levels of ginseng extract. Ginseng candy with vitamin C and ginseng crunchy white chocolate were the most highly accepted, while sliced ginseng root product was the least accepted among the seven commercial products. Sensory acceptance increased in proportion to the content of sugar and honey in ginseng tea, whereas acceptance decreased with increasing content of ginseng extract in milk and dark chocolates. Findings demonstrate that ginseng food product types with which consumers have been already familiar, such as candy and chocolate, will have potential for success in the U.S. market. Chocolate could be suggested as a food matrix into which ginseng can be incorporated, as containing more bioactive compounds than ginseng tea at a similar acceptance level. Future research may include a descriptive analysis with ginseng-based products to identify the key drivers of liking and disliking for successful new product development.

  14. Genres Across Cultures: Types of Acceptability Variation

    ERIC Educational Resources Information Center

    Shaw, Philip; Gillaerts, Paul; Jacobs, Everett; Palermo, Ofelia; Shinohara, Midori; Verckens, J. Piet

    2004-01-01

    One can ask four questions about genre validity across cultures. Does a certain form or configuration occur in the culture in question? Is it acceptable? If acceptable, is it in practice preferred? Is it recommended by prescriptive authorities? This paper reports the results of an attempt to answer these questions empirically by testing the…

  15. 48 CFR 11.103 - Market acceptance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Market acceptance. 11.103... DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 11.103 Market acceptance. (a) Section... may, under appropriate circumstances, require offerors to demonstrate that the items offered— (1)...

  16. 5 CFR 1655.11 - Loan acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 3 2013-01-01 2013-01-01 false Loan acceptance. 1655.11 Section 1655.11 Administrative Personnel FEDERAL RETIREMENT THRIFT INVESTMENT BOARD LOAN PROGRAM § 1655.11 Loan acceptance. The TSP record keeper will reject a loan application if: (a) The participant is not qualified to apply...

  17. 5 CFR 1655.11 - Loan acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 5 Administrative Personnel 3 2011-01-01 2011-01-01 false Loan acceptance. 1655.11 Section 1655.11 Administrative Personnel FEDERAL RETIREMENT THRIFT INVESTMENT BOARD LOAN PROGRAM § 1655.11 Loan acceptance. The TSP record keeper will reject a loan application if: (a) The participant is not qualified to apply...

  18. 5 CFR 1655.11 - Loan acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 5 Administrative Personnel 3 2012-01-01 2012-01-01 false Loan acceptance. 1655.11 Section 1655.11 Administrative Personnel FEDERAL RETIREMENT THRIFT INVESTMENT BOARD LOAN PROGRAM § 1655.11 Loan acceptance. The TSP record keeper will reject a loan application if: (a) The participant is not qualified to apply...

  19. 48 CFR 3011.103 - Market acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 7 2014-10-01 2014-10-01 false Market acceptance. 3011.103 Section 3011.103 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND... Developing Requirements Documents 3011.103 Market acceptance. (a) Contracting officers may act on behalf...

  20. 48 CFR 411.103 - Market acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Market acceptance. 411.103... ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 411.103 Market... accordance with FAR 11.103(a), the market acceptability of their items to be offered. (b) The...

  1. 48 CFR 411.103 - Market acceptance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Market acceptance. 411.103... ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 411.103 Market... accordance with FAR 11.103(a), the market acceptability of their items to be offered. (b) The...

  2. 48 CFR 3011.103 - Market acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 7 2013-10-01 2012-10-01 true Market acceptance. 3011.103 Section 3011.103 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY... Requirements Documents 3011.103 Market acceptance. (a) Contracting officers may act on behalf of the head...

  3. 48 CFR 3011.103 - Market acceptance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 7 2012-10-01 2012-10-01 false Market acceptance. 3011.103 Section 3011.103 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND... Developing Requirements Documents 3011.103 Market acceptance. (a) Contracting officers may act on behalf...

  4. 48 CFR 411.103 - Market acceptance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Market acceptance. 411.103... ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 411.103 Market... accordance with FAR 11.103(a), the market acceptability of their items to be offered. (b) The...

  5. An open trial of Acceptance-based Separated Family Treatment (ASFT) for adolescents with anorexia nervosa.

    PubMed

    Timko, C Alix; Zucker, Nancy L; Herbert, James D; Rodriguez, Daniel; Merwin, Rhonda M

    2015-06-01

    Family based-treatments have the most empirical support in the treatment of adolescent anorexia nervosa; yet, a significant percentage of adolescents and their families do not respond to manualized family based treatment (FBT). The aim of this open trial was to conduct a preliminary evaluation of an innovative family-based approach to the treatment of anorexia: Acceptance-based Separated Family Treatment (ASFT). Treatment was grounded in Acceptance and Commitment Therapy (ACT), delivered in a separated format, and included an ACT-informed skills program. Adolescents (ages 12-18) with anorexia or sub-threshold anorexia and their families received 20 treatment sessions over 24 weeks. Outcome indices included eating disorder symptomatology reported by the parent and adolescent, percentage of expected body weight achieved, and changes in psychological acceptance/avoidance. Half of the adolescents (48.0%) met criteria for full remission at the end of treatment, 29.8% met criteria for partial remission, and 21.3% did not improve. Overall, adolescents had a significant reduction in eating disorder symptoms and reached expected body weight. Treatment resulted in changes in psychological acceptance in the expected direction for both parents and adolescents. This open trial provides preliminary evidence for the feasibility, acceptability, and efficacy of ASFT for adolescents with anorexia. Directions for future research are discussed.

  6. Vibration, acoustic, and shock design and test criteria for components on the Solid Rocket Boosters (SRB), Lightweight External Tank (LWT), and Space Shuttle Main Engines (SSME)

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The vibration, acoustics, and shock design and test criteria for components and subassemblies on the space shuttle solid rocket booster (SRB), lightweight tank (LWT), and main engines (SSME) are presented. Specifications for transportation, handling, and acceptance testing are also provided.

  7. Acceptance and control of aircraft interior noise and vibration

    NASA Technical Reports Server (NTRS)

    Stephens, D. G.; Leatherwood, J. D.

    1980-01-01

    Ride quality criteria for noise, vibration, and their combination in the helicopter cabin environment are discussed. Results are presented of laboratory and field studies of passenger responses to interior noise and vibration during the performance of a listening task and during reverie, as well as to the interaction of noise with multi-frequency and multi-axis vibration. A study of means for reducing helicopter interior noise based on analytical, experimental and flight studies of the near-field noise source characteristics of the aircraft, the transmission of noise through aircraft structures and the attenuation of noise by various noise control treatments is then presented which has resulted in a reduction of 3 dB in helicopter cabin noise. Finally, a model under development to evaluate passenger acceptance of a helicopter noise and vibration environment is indicated which incorporates the observed noise and vibration effects on comfort and is expected to provide insights for more effective noise and vibration control.

  8. Understanding diversity: the importance of social acceptance.

    PubMed

    Chen, Jacqueline M; Hamilton, David L

    2015-04-01

    Two studies investigated how people define and perceive diversity in the historically majority-group dominated contexts of business and academia. We hypothesized that individuals construe diversity as both the numeric representation of racial minorities and the social acceptance of racial minorities within a group. In Study 1, undergraduates' (especially minorities') perceptions of campus diversity were predicted by perceived social acceptance on a college campus, above and beyond perceived minority representation. Study 2 showed that increases in a company's representation and social acceptance independently led to increases in perceived diversity of the company among Whites. Among non-Whites, representation and social acceptance only increased perceived diversity of the company when both qualities were high. Together these findings demonstrate the importance of both representation and social acceptance to the achievement of diversity in groups and that perceiver race influences the relative importance of these two components of diversity.

  9. Heavy metal, religiosity, and suicide acceptability.

    PubMed

    Stack, S

    1998-01-01

    There has been little work at the national level on the subject of musical subcultures and suicide acceptability. The present work explores the link between "heavy metal" rock fanship and suicide acceptability. Metal fanship is thought to elevate suicide acceptability through such means as exposure to a culture of personal and societal chaos marked by hopelessness, and through its associations with demographic risk factors such as gender, socioeconomic status, and education. Data are taken from the General Social Survey. A link between heavy metal fanship and suicide acceptability is found. However, this relationship becomes nonsignificant once level of religiosity is controlled. Metal fans are low in religiosity, which contributes, in turn, to greater suicide acceptability.

  10. Monte Carlo determination of Phoswich Array acceptance

    SciTech Connect

    Costales, J.B.; E859 Collaboration

    1992-07-01

    The purpose of this memo is to describe the means by which the acceptance of the E859 Phoswich Array is determined. By acceptance, two things are meant: first, the geometrical acceptance (the angular size of the modules); second, the detection acceptance (the probability that a particle of a given 4-momentum initially in the detector line-of-sight is detected as such). In particular, this memo will concentrate on those particles for which the energy of the particle can be sufficiently measured; that is to say, protons, deuterons and tritons. In principle, the phoswich array can measure the low end of the pion energy spectrum, but with a poor resolution. The detection acceptance of pions and baryon clusters heavier than tritons will be neglected in this memo.

  11. Factors influencing the acceptance of nature conservation measures--a qualitative study in Switzerland.

    PubMed

    Schenk, Anita; Hunziker, Marcel; Kienast, Felix

    2007-04-01

    Landscapes fulfil a multitude of ecological and social functions. Due to the fact that both traditional and everyday landscapes today face many different threats, regulatory measures have been undertaken in many countries to protect and further sustainable landscape development. They include legislation as well as economic incentives. In recent years, however, it has become clear that just to have a few laws and to spend money on subsidies is not enough. Factors other than legislation are also essential to further the sustainable development of landscapes. One of the basic factors affecting the success or failure of landscape conservation measures is public acceptance of these measures. Our project took this as its starting point. The objective was to determine which conditions and factors influence acceptance positively or negatively. To this end 22 Swiss who are directly affected by nature conservation measures, in particular by mire landscape and dry meadow conservation measures, were interviewed using qualitative interview techniques. It is shown that perception, communication, and possibilities to participate are the most decisive driving factors influencing the formation of a long-lasting acceptance. Furthermore, acceptance may be based mainly on economic criteria, on usefulness, on ecological or even aesthetic aspects. It can be shown that not all of these motivations lead to a long-lasting acceptance. Ecologically based acceptance seems the most promising because it is founded on general convictions. Economic incentives--though important--seem to generate only superficial acceptance and do not seem to be as important as is usually assumed.

  12. Independent review of Oak Ridge HCTW test program and development of seismic evaluation criteria

    SciTech Connect

    1995-05-01

    Many of the existing buildings at the Oak Ridge Y-12 Plant are steel frame construction with unreinforced hollow clay tile infill walls (HCTW). The HCTW infill provides some lateral seismic resistance to the design/evaluation basis earthquake; however acceptance criteria for this construction must be developed. The basis for the development of seismic criteria is the Oak Ridge HCTW testing and analysis program and the target performance goals of DOE 5480.28 and DOE-STD-1020-94. This report documents and independent review of the testing and analysis program and development of recommended acceptance criteria for Oak Ridge HCTW construction. The HCTW test program included ``macro`` wall in-plane and out-of-plane tests, full-scale wall in-plane and out-of-plane tests, in-situ out-of-plane test, shake table tests, and masonry component tests.

  13. A Positive View of Peer Acceptance in Aggressive Youth: Risk for Future Peer Acceptance.

    ERIC Educational Resources Information Center

    Hughes, Jan N.; Cavell, Timothy A.; Prasad-Gaur, Archna

    2001-01-01

    Uses longitudinal data to determine whether a positive view of perceived peer acceptance is a risk factor for continued aggression and social rejection for aggressive children. Results indicate that perceived peer acceptance did not predict aggression. However, children who reported higher levels of perceived peer acceptance received lower actual…

  14. DEVELOPMENT OF MARINE WATER QUALITY CRITERIA

    EPA Science Inventory

    The U.S. Environmental Protectional Agency has developed guidelines for deriving numerical national water quality criteria for the protection of aquatic organisms and their uses. These guidelines provide the method for deriving water quality criteria, including minimum data base...

  15. 15 CFR 768.6 - Criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... DETERMINATION PROCEDURES AND CRITERIA § 768.6 Criteria. BIS will evaluate the evidence contained in a FAS or TAC... defined in § 768.1(d) of this part. In order to initiate an assessment, each FAS and TAC...

  16. Appropriate wastewater treatment systems for developing countries: criteria and indictor assessment in Thailand.

    PubMed

    Singhirunnusorn, W; Stenstrom, M K

    2009-01-01

    This paper presents a comprehensive approach with factors to select appropriate wastewater treatment systems in developing countries in general and Thailand in particular. Instead of focusing merely on the technical dimensions, the study integrates the social, economic, and environmental concerns to develop a set of criteria and indicators (C&I) useful for evaluating appropriate system alternatives. The paper identifies seven elements crucial for technical selection: reliability, simplicity, efficiency, land requirement, affordability, social acceptability, and sustainability. Variables are organized into three hierarchical elements, namely: principles, criteria, and indicators. The study utilizes a mail survey to obtain information from Thai experts-academicians, practitioners, and government officials-to evaluate the C&I list. Responses were received from 33 experts on two multi-criteria analysis inquiries-ranking and rating-to obtain evaluative judgments. Results show that reliability, affordability, and efficiency are among the most important elements, followed by sustainability and social acceptability. Land requirement and simplicity are low in priority with relatively inferior weighting. A number of criteria are then developed to match the contextual environment of each particular condition. A total of 14 criteria are identified which comprised 64 indicators. Unimportant criteria and indicators are discarded after careful consideration, since some of the indicators are local or site specific.

  17. Determining the Criteria and Their Weights for Medical Schools' Ranking: A National Consensus.

    PubMed

    Mojtahedzadeh, Rita; Mohammadi, Aeen; Kohan, Noushin; Gharib, Mitra; Zolfaghari, Mitra

    2016-06-01

    Delphi as a consensus development technique enables anonymous, systematic refinement of expert opinion with the aim of arriving at a combined or consensual position. In this study, we determined the criteria and their weights for Iranian Medical Schools' ranking through a Delphi process. An expert committee devised 13 proposed criteria with 32 indicators with their weights, which were arranged hierarchically in the form of a tree diagram. We used the Delphi technique to reach a consensus on these criteria and weights among the deans of 38 public Iranian medical schools. For this purpose, we devised and sent a questionnaire to schools and asked them to suggest or correct the criteria and their weights. We repeated this process in two rounds till all the schools reached an acceptable consensus on them. All schools reached a consensus on the set of 13 criteria and 30 indicators and their weights in three main contexts of education, research and facilities, and equipment which were used for Medical Schools' ranking. Using Delphi technique for devising the criteria and their weights in evaluation processes such as ranking makes their results more acceptable among universities.

  18. Consumer Acceptance of Dry Dog Food Variations

    PubMed Central

    Donfrancesco, Brizio Di; Koppel, Kadri; Swaney-Stueve, Marianne; Chambers, Edgar

    2014-01-01

    Simple Summary The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Pet owners evaluated dry dog food samples available in the US market. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Abstract The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog’s liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products. PMID:26480043

  19. Will patients accept randomization to psychoanalysis? A feasibility study.

    PubMed

    Caligor, Eve; Hilsenroth, Mark J; Devlin, Michael; Rutherford, Bret R; Terry, Madeleine; Roose, Steven P

    2012-04-01

    The feasibility of using a randomized design in a psychoanalytic outcome study was evaluated. Our hypothesis was that it would be feasible to randomize patients to psychoanalysis three or four times weekly on the couch for five years, supportive expressive therapy once or twice weekly for up to forty sessions, and cognitive behavior therapy once or twice weekly for up to forty sessions. Successful randomization was defined as a 30% recruitment rate among eligible patients. Recruitment began in September 2009 and closed in April 2010. A total of 132 subjects responded to study advertisements, 107 of whom (81%) were triaged out. The remaining 25 were scheduled for the first of two clinical interviews, and 21 of 25 (88%) completed the interview. Eleven of the 25 (44%) were determined to be eligible based on inclusion and exclusion criteria. Eight of the 11 accepted the idea of randomization and completed the diagnostic assessment phase. Calculated on the basis of 8 of 11 eligible patients accepting randomization, the 95% confidence interval was that 39% to 92% of eligible subjects would participate in a larger study of this design. Our findings support the feasibility of implementing an RCT comparing psychoanalysis as defined by the American Psychoanalytic Association (three or four times weekly on the couch for approximately five years) with shorter-term dynamic or cognitive behavioral therapy once or twice a week. Pre-treatment characteristics of these eight patients are presented, as are initial reliability data for the treatment adherence scales used in this trial.

  20. 42 CFR 421.120 - Performance criteria.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 3 2011-10-01 2011-10-01 false Performance criteria. 421.120 Section 421.120... (CONTINUED) MEDICARE PROGRAM MEDICARE CONTRACTING Intermediaries § 421.120 Performance criteria. (a) Application of performance criteria. As part of the intermediary evaluations authorized by section 1816(f)...

  1. 42 CFR 421.120 - Performance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Performance criteria. 421.120 Section 421.120... (CONTINUED) MEDICARE PROGRAM MEDICARE CONTRACTING Intermediaries § 421.120 Performance criteria. (a) Application of performance criteria. As part of the intermediary evaluations authorized by section 1816(f)...

  2. 40 CFR 258.24 - Air criteria.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Air criteria. 258.24 Section 258.24... SOLID WASTE LANDFILLS Operating Criteria § 258.24 Air criteria. (a) Owners or operators of all MSWLFs... Implementation Plan (SIP) approved or promulgated by the Administrator pursuant to section 110 of the Clean...

  3. 7 CFR 658.5 - Criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... site assessment criteria are: (1) How much land is in nonurban use within a radius of 1.0 mile from... criteria required by section 1541(a) of the Act, 7 U.S.C. 4202(a). The criteria were developed by the... as follows: (a) Land Evaluation Criterion—Relative Value. The land evaluation criterion is based...

  4. 10 CFR 905.36 - Marketing criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Marketing criteria. 905.36 Section 905.36 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Power Marketing Initiative § 905.36 Marketing criteria. Western shall retain applicable provisions of existing marketing criteria for projects...

  5. 10 CFR 905.36 - Marketing criteria.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Marketing criteria. 905.36 Section 905.36 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Power Marketing Initiative § 905.36 Marketing criteria. Western shall retain applicable provisions of existing marketing criteria for projects...

  6. 10 CFR 905.36 - Marketing criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Marketing criteria. 905.36 Section 905.36 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Power Marketing Initiative § 905.36 Marketing criteria. Western shall retain applicable provisions of existing marketing criteria for projects...

  7. 10 CFR 905.36 - Marketing criteria.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Marketing criteria. 905.36 Section 905.36 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Power Marketing Initiative § 905.36 Marketing criteria. Western shall retain applicable provisions of existing marketing criteria for projects...

  8. 10 CFR 905.36 - Marketing criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Marketing criteria. 905.36 Section 905.36 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Power Marketing Initiative § 905.36 Marketing criteria. Western shall retain applicable provisions of existing marketing criteria for projects...

  9. 7 CFR 1494.1101 - Criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Criteria. 1494.1101 Section 1494.1101 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS EXPORT BONUS PROGRAMS Dairy Export Incentive Program Criteria § 1494.1101 Criteria. The...

  10. 40 CFR 258.24 - Air criteria.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS Operating Criteria § 258.24 Air criteria. (a) Owners or operators of all MSWLFs... Act, as amended. (b) Open burning of solid waste, except for the infrequent burning of...

  11. 40 CFR 258.40 - Design criteria.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS Design Criteria § 258.40 Design criteria. (a) New MSWLF units and lateral... specified by the Director of an approved State shall be no more than 150 meters from the waste...

  12. 40 CFR 131.11 - Criteria.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS Establishment of Water Quality Standards § 131.11 Criteria. (a) Inclusion of pollutants: (1) States must adopt those water quality criteria that protect the designated use. Such criteria must be based on...

  13. 40 CFR 131.11 - Criteria.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS Establishment of Water Quality Standards § 131.11 Criteria. (a) Inclusion of pollutants: (1) States must adopt those water quality criteria that protect the designated use. Such criteria must be based on...

  14. 40 CFR 131.11 - Criteria.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS Establishment of Water Quality Standards § 131.11 Criteria. (a) Inclusion of pollutants: (1) States must adopt those water quality criteria that protect the designated use. Such criteria must be based on...

  15. 40 CFR 131.11 - Criteria.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS Establishment of Water Quality Standards § 131.11 Criteria. (a) Inclusion of pollutants: (1) States must adopt those water quality criteria that protect the designated use. Such criteria must be based on...

  16. 40 CFR 131.11 - Criteria.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS Establishment of Water Quality Standards § 131.11 Criteria. (a) Inclusion of pollutants: (1) States must adopt those water quality criteria that protect the designated use. Such criteria must be based on...

  17. 46 CFR 170.170 - Weather criteria.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Weather criteria. 170.170 Section 170.170 Shipping COAST... ALL INSPECTED VESSELS Intact Stability Criteria § 170.170 Weather criteria. (a) Each vessel must be... weather deck or abnormal sheer. (c) When doing the calculations required by paragraph (a) of this...

  18. 46 CFR 170.170 - Weather criteria.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Weather criteria. 170.170 Section 170.170 Shipping COAST... ALL INSPECTED VESSELS Intact Stability Criteria § 170.170 Weather criteria. (a) Each vessel must be... weather deck or abnormal sheer. (c) When doing the calculations required by paragraph (a) of this...

  19. 46 CFR 170.170 - Weather criteria.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Weather criteria. 170.170 Section 170.170 Shipping COAST... ALL INSPECTED VESSELS Intact Stability Criteria § 170.170 Weather criteria. (a) Each vessel must be... weather deck or abnormal sheer. (c) When doing the calculations required by paragraph (a) of this...

  20. 46 CFR 170.170 - Weather criteria.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Weather criteria. 170.170 Section 170.170 Shipping COAST... ALL INSPECTED VESSELS Intact Stability Criteria § 170.170 Weather criteria. (a) Each vessel must be... weather deck or abnormal sheer. (c) When doing the calculations required by paragraph (a) of this...

  1. 49 CFR 80.15 - Selection criteria.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Selection criteria. 80.15 Section 80.15 Transportation Office of the Secretary of Transportation CREDIT ASSISTANCE FOR SURFACE TRANSPORTATION PROJECTS § 80.15 Selection criteria. (a) The Secretary shall assign weights as indicated to the following eight selection criteria in evaluating and...

  2. 49 CFR 80.15 - Selection criteria.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Selection criteria. 80.15 Section 80.15 Transportation Office of the Secretary of Transportation CREDIT ASSISTANCE FOR SURFACE TRANSPORTATION PROJECTS § 80.15 Selection criteria. (a) The Secretary shall assign weights as indicated to the following eight selection criteria in evaluating and...

  3. 49 CFR 80.15 - Selection criteria.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Selection criteria. 80.15 Section 80.15 Transportation Office of the Secretary of Transportation CREDIT ASSISTANCE FOR SURFACE TRANSPORTATION PROJECTS § 80.15 Selection criteria. (a) The Secretary shall assign weights as indicated to the following eight selection criteria in evaluating and...

  4. 49 CFR 80.15 - Selection criteria.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Selection criteria. 80.15 Section 80.15 Transportation Office of the Secretary of Transportation CREDIT ASSISTANCE FOR SURFACE TRANSPORTATION PROJECTS § 80.15 Selection criteria. (a) The Secretary shall assign weights as indicated to the following eight selection criteria in evaluating and...

  5. 49 CFR 80.15 - Selection criteria.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 1 2014-10-01 2014-10-01 false Selection criteria. 80.15 Section 80.15 Transportation Office of the Secretary of Transportation CREDIT ASSISTANCE FOR SURFACE TRANSPORTATION PROJECTS § 80.15 Selection criteria. (a) The Secretary shall assign weights as indicated to the following eight selection criteria in evaluating and...

  6. 49 CFR 22.21 - Participation criteria.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Participation criteria. 22.21 Section 22.21... § 22.21 Participation criteria. A lender who participates in the STLP must meet the following criteria... debarred or suspended from participation in a government contract or delinquent on a government debt....

  7. The Admissions Criteria of Secondary Free Schools

    ERIC Educational Resources Information Center

    Morris, Rebecca

    2014-01-01

    This paper presents the results of an analysis of the admissions criteria used by the first two waves of secondary Free Schools in England. The type of criteria and their ranked order is explored and their potential impact on the school composition is considered. The findings demonstrate the diversity of criteria being used by this new type of…

  8. An aircraft manufacturer's approach to rideability criteria

    NASA Technical Reports Server (NTRS)

    Omassey, R. C.; Leve, H.; Gaume, J. G.

    1972-01-01

    The approach of an aircraft manufacturer to ride quality in air transportation is presented. The subjects discussed are: (1) the external and internal environment in terms of vibration and acoustic sources and general response, (2) guidelines and criteria reflecting current practice, (3) present and future efforts to develop rideability criteria, and (4) requirements for data, criteria, and research in various rideability areas.

  9. 49 CFR 22.21 - Participation criteria.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 1 2014-10-01 2014-10-01 false Participation criteria. 22.21 Section 22.21... § 22.21 Participation criteria. A lender who participates in the STLP must meet the following criteria... debarred or suspended from participation in a government contract or delinquent on a government debt....

  10. 49 CFR 22.21 - Participation criteria.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Participation criteria. 22.21 Section 22.21... § 22.21 Participation criteria. A lender who participates in the STLP must meet the following criteria... debarred or suspended from participation in a government contract or delinquent on a government debt....

  11. 7 CFR 1494.20 - Criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 10 2014-01-01 2014-01-01 false Criteria. 1494.20 Section 1494.20 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE EXPORT PROGRAMS EXPORT BONUS PROGRAMS Export Enhancement Program Criteria § 1494.20 Criteria....

  12. 7 CFR 1494.20 - Criteria.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 10 2012-01-01 2012-01-01 false Criteria. 1494.20 Section 1494.20 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE EXPORT PROGRAMS EXPORT BONUS PROGRAMS Export Enhancement Program Criteria § 1494.20 Criteria....

  13. 7 CFR 1494.20 - Criteria.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 10 2013-01-01 2013-01-01 false Criteria. 1494.20 Section 1494.20 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE EXPORT PROGRAMS EXPORT BONUS PROGRAMS Export Enhancement Program Criteria § 1494.20 Criteria....

  14. 42 CFR 456.5 - Evaluation criteria.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Evaluation criteria. 456.5 Section 456.5 Public...) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL General Provisions § 456.5 Evaluation criteria. The agency must establish and use written criteria for evaluating the appropriateness and quality of...

  15. 29 CFR 1956.10 - Specific criteria.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... GOVERNMENT EMPLOYEES IN STATES WITHOUT APPROVED PRIVATE EMPLOYEE PLANS Criteria § 1956.10 Specific criteria. (a) General. A State plan for public employees must meet the specific criteria set forth in this... required by the Assistant Secretary. (c) Standards. The State plan for public employees shall include,...

  16. Approaches to acceptable risk: a critical guide

    SciTech Connect

    Fischhoff, B.; Lichtenstein, S.; Slovic, P.; Keeney, R.; Derby, S.

    1980-12-01

    Acceptable-risk decisions are an essential step in the management of technological hazards. In many situations, they constitute the weak (or missing) link in the management process. The absence of an adequate decision-making methodology often produces indecision, inconsistency, and dissatisfaction. The result is neither good for hazard management nor good for society. This report offers a critical analysis of the viability of various approaches as guides to acceptable-risk decisions. This report seeks to define acceptable-risk decisions and to examine some frequently proposed, but inappropriate, solutions. 255 refs., 22 figs., 25 tabs.

  17. Attitudes of belgian students of medicine, philosophy, and law toward euthanasia and the conditions for its acceptance.

    PubMed

    Roelands, Marc; Van den Block, Lieve; Geurts, Sylvie; Deliens, Luc; Cohen, Joachim

    2015-01-01

    Euthanasia is legal in Belgium if due care criteria are met, which is judged by committees including physicians, ethicists, and jurists. We examined whether students in these disciplines differ in how they judge euthanasia as an acceptable act. A cross-sectional, anonymous e-mail survey revealed that they have similar attitudes and accept its legalization. Therefore, joint decision-making of physicians, ethicists, and lawyers regarding euthanasia seems to have a common attitudinal base in Belgium. However, they differ to some extent regarding the conditions they put forward for euthanasia being acceptable. Philosophy of life (religion) was an independent predictor of these attitudes.

  18. Myalgic encephalomyelitis: International Consensus Criteria

    PubMed Central

    Carruthers, B M; van de Sande, M I; De Meirleir, K L; Klimas, N G; Broderick, G; Mitchell, T; Staines, D; Powles, A C P; Speight, N; Vallings, R; Bateman, L; Baumgarten-Austrheim, B; Bell, D S; Carlo-Stella, N; Chia, J; Darragh, A; Jo, D; Lewis, D; Light, A R; Marshall-Gradisbik, S; Mena, I; Mikovits, J A; Miwa, K; Murovska, M; Pall, M L; Stevens, S

    2011-01-01

    , Japan; A. Kirchenstein Institute of Microbiology and Virology, Riga Stradins University, Riga, Latvia; Department of Biochemistry & Basic Medical Sciences, Washington State University, Portland, OR; Department of Sports Sciences, University of the Pacific, Stockton, CA USA). Myalgic encephalomyelitis: International Consensus Criteria (Review). J Intern Med 2011; 270: 327–338. The label ‘chronic fatigue syndrome’ (CFS) has persisted for many years because of the lack of knowledge of the aetiological agents and the disease process. In view of more recent research and clinical experience that strongly point to widespread inflammation and multisystemic neuropathology, it is more appropriate and correct to use the term ‘myalgic encephalomyelitis’ (ME) because it indicates an underlying pathophysiology. It is also consistent with the neurological classification of ME in the World Health Organization’s International Classification of Diseases (ICD G93.3). Consequently, an International Consensus Panel consisting of clinicians, researchers, teaching faculty and an independent patient advocate was formed with the purpose of developing criteria based on current knowledge. Thirteen countries and a wide range of specialties were represented. Collectively, members have approximately 400 years of both clinical and teaching experience, authored hundreds of peer-reviewed publications, diagnosed or treated approximately 50 000 patients with ME, and several members coauthored previous criteria. The expertise and experience of the panel members as well as PubMed and other medical sources were utilized in a progression of suggestions/drafts/reviews/revisions. The authors, free of any sponsoring organization, achieved 100% consensus through a Delphi-type process. The scope of this paper is limited to criteria of ME and their application. Accordingly, the criteria reflect the complex symptomatology. Operational notes enhance clarity and specificity by providing guidance in the

  19. Chinese Nurses' Acceptance of PDA: A Cross-Sectional Survey Using a Technology Acceptance Model.

    PubMed

    Wang, Yanling; Xiao, Qian; Sun, Liu; Wu, Ying

    2016-01-01

    This study explores Chinese nurses' acceptance of PDA, using a questionnaire based on the framework of Technology Acceptance Model (TAM). 357 nurses were involved in the study. The results reveal the scores of the nurses' acceptance of PDA were means 3.18~3.36 in four dimensions. The younger of nurses, the higher nurses' title, the longer previous usage time, the more experienced using PDA, and the more acceptance of PDA. Therefore, the hospital administrators may change strategies to enhance nurses' acceptance of PDA, and promote the wide application of PDA.

  20. What Are Acceptable Limits of Radiation?

    NASA Video Gallery

    Brad Gersey, lead research scientist at the Center for Radiation Engineering and Science for Space Exploration, or CRESSE, at Prairie View A&M University, describes the legal and acceptable limits ...