Sample records for accepted industry practices

  1. "But doctors do it...": nurses' views of gifts and information from the pharmaceutical industry.

    PubMed

    Jutel, Annemarie; Menkes, David B

    2009-06-01

    Most nurses, like their physician counterparts, lack education regarding pharmaceutical marketing strategies, and little is known of their beliefs and practices regarding this industry. Nurses are increasingly targeted by pharmaceutical companies as they become more involved in prescription and as policies restrict pharmaceutical companies' contact with physicians. To assess nurses' beliefs and reported practices concerning pharmaceutical marketing and sponsorship strategies. We conducted parallel Web- and paper-based surveys of a sample of senior registered nurses employed by government-funded health boards in 2 regions of New Zealand to explore their contact with the pharmaceutical industry as well as their beliefs and practices regarding information, gifts, and sponsorship provided by pharmaceutical companies. Returns were tested using Fisher's exact test to determine consistency in response between regions. Results for key outcome variables, including attitude toward the value of industry-derived information, were analyzed by region and in aggregate. Most nurses had contact with pharmaceutical sales representatives (69/106), accepted gifts from representatives (79/105), and believed information from the pharmaceutical industry probably improved their practice (71/106). Half believed that they would be able to detect misleading information if it were present, and 35% believed that accepting gifts and sponsorship was ethically acceptable. We found positive associations between the belief that information from the industry improved practice and reported acceptance of conference funding (OR 3.63; 95% CI 1.41 to 11.55), free food (OR 3.24; 95% CI 2.03 to 7.55), or gifts (OR 3.52; 95% CI 1.38 to 8.95). Nurses generally acknowledge the presence of pharmaceutical marketing in the hospital and the ethical challenges it presents; nonetheless, they also generally accept marketing gifts and may underestimate both the ethical challenges and their own susceptibility to persuasion. Given the increasing role that nurses may play in pharmaceutical marketing strategy, the profession should consider its position vis-à-vis the industry.

  2. "Under the radar": nurse practitioner prescribers and pharmaceutical industry promotions.

    PubMed

    Ladd, Elissa C; Mahoney, Diane Feeney; Emani, Srinivas

    2010-12-01

    To assess nurse practitioners' interactions with pharmaceutical industry promotional activities and their perception of information reliability and self-reported prescribing behaviors. Self-administered online survey. A nationally randomized sample of nurse practitioner prescribers was surveyed. Eligibility criteria included current clinical practice and licensure to prescribe medications in their state of practice. A total of 263 responses were analyzed. Almost all respondents (96%) reported regular contact with pharmaceutical sales representatives, and most (71%) reported receiving information on new drugs directly from pharmaceutical sales representatives some or most of the time. A large portion (66%) dispensed drug samples regularly to their patients, and 73% believed that samples were somewhat or very helpful in learning about new drugs. Eighty-one percent of respondents thought that it was ethically acceptable to give out samples to anyone, and 90% believed that it was acceptable to attend lunch and dinner events sponsored by the pharmaceutical industry. Almost half (48%) stated that they were more likely to prescribe a drug that was highlighted during a lunch or dinner event. Most respondents stated that it was ethically acceptable for speakers to be paid by industry. Nurse practitioner prescribers had extensive contact with pharmaceutical industry promotional activities such as pharmaceutical representative contact, receipt of drug samples, and regular attendance at industry-sponsored meal events and continuing education programs. They reported that industry interface with nurse practitioner prescribers in the form of sponsored meals, education events, and paid speakers was ethically acceptable.

  3. Physician-industry relations. Part 1: individual physicians.

    PubMed

    Coyle, Susan L

    2002-03-05

    This is part 1 of a 2-part paper on ethics and physician-industry relationships. Part 1 offers advice to individual physicians; part 2 gives recommendations to medical education providers and medical professional societies. Physicians and industry have a shared interest in advancing medical knowledge. Nonetheless, the primary ethic of the physician is to promote the patient's best interests, while the primary ethic of industry is to promote profitability. Although partnerships between physicians and industry can result in impressive medical advances, they also create opportunities for bias and can result in unfavorable public perceptions. Many physicians and physicians-in-training think they are impervious to commercial influence. However, recent studies show that accepting industry hospitality and gifts, even drug samples, can compromise judgment about medical information and subsequent decisions about patient care. It is up to the physician to judge whether a gift is acceptable. A very general guideline is that it is ethical to accept modest gifts that advance medical practice. It is clearly unethical to accept gifts or services that obligate the physician to reciprocate. Conflicts of interest can arise from other financial ties between physicians and industry, whether to outside companies or self-owned businesses. Such ties include honorariums for speaking or writing about a company's product, payment for participating in clinic-based research, and referrals to medical resources. All of these relationships have the potential to influence a physician's attitudes and practices. This paper explores the ethical quandaries involved and offers guidelines for ethical business relationships.

  4. An assessment of workplace programmes designed to control inhalation risks using respiratory protective equipment.

    PubMed

    Bell, Nikki; Vaughan, Nicholas P; Morris, Len; Griffin, Peter

    2012-04-01

    Few studies have assessed respiratory protective equipment (RPE) failures at the organizational level despite evidence to suggest that compliance with good practice may be low. The aim of this study was to develop an understanding of what current RPE programmes look like across industry and how this compares with good practice. Twenty cross-industry site visits were conducted with companies that had RPE programmes in place. Visits involved management interviews to explore current RPE systems and procedures and the decision making underpinning these. Observations of RPE operatives were included followed by short interviews to discuss the behaviours observed. Post-site assessments jointly undertaken by an RPE scientist and psychologist produced ratings for each site on six critical aspects of RPE programmes (knowledge/awareness, selection, use, training/information, supervision, and storage/cleaning/maintenance). Overall ratings for theoretical competence (i.e. management knowledge of RPE) and practical control (i.e. actual RPE practice on the shop floor) were also given. Qualitative analysis was performed on all interview data. The performance of RPE programmes varied across industry. Fewer than half the companies visited were considered to have an acceptable level of theoretical competence and practical control. Four distinct groups emerged from the 20 sites studied, ranging from Learners (low theoretical competence and practical control--four sites), Developers (acceptable theoretical competence and low practical control--five sites), and Fortuitous (low theoretical competence and acceptable practical control--two sites), to Proficient (acceptable theoretical competence and practical control--nine sites). None of the companies visited were achieving optimal control through the use of RPE. Widespread inadequacies were found with programme implementation, particularly training, supervision, and maintenance. Our taxonomy based on the four groups (Learners, Developers, Fortuitous, and Proficient) provided a useful expert-informed tool for explaining the variation in performance of RPE programmes across industry. Although further research and development are required, this taxonomy offers a useful starting point for the development of practical tools that may assist managers in making the much-needed improvements to all facets of programme implementation, particularly training, supervision, and maintenance.

  5. 75 FR 29385 - Safety Advisory 2010-01

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-25

    ... outlined in 49 CFR 231.1(a)(4)(iii). Welding, where present, must be done in accordance with industry practice, as specified in American Welding Society (AWS) Standards D1 and D15. Regional FRA inspectors have... accepted industry practice or by using approved fasteners, as outlined in 49 CFR 231.27(a)(4)(iii). Welding...

  6. 40 CFR 68.56 - Maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

  7. 40 CFR 68.56 - Maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

  8. 40 CFR 68.56 - Maintenance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

  9. 40 CFR 68.56 - Maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

  10. 40 CFR 68.56 - Maintenance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

  11. The Alignment of Software Testing Skills of IS Students with Industry Practices--A South African Perspective

    ERIC Educational Resources Information Center

    Scott, Elsje; Zadirov, Alexander; Feinberg, Sean; Jayakody, Ruwanga

    2004-01-01

    Software testing is a crucial component in the development of good quality systems in industry. For this reason it was considered important to investigate the extent to which the Information Systems (IS) syllabus at the University of Cape Town (UCT) was aligned with accepted software testing practices in South Africa. For students to be effective…

  12. Cost Comparability Handbook

    DTIC Science & Technology

    1998-01-01

    Services and private industry . Overall cost analysis is in two segments. The first segment is the end item cost to the customer. It is anticipated...to compete for depot maintenance work. Private industry offerors do not complete a Comparability / Bid Proposal Worksheet (Form 1). These rules and...incorporates governmental cost accounting conventions with standard accounting practices in industry and with generally accepted accounting principles

  13. Doctors and pharmaceutical industry.

    PubMed

    Beran, Roy G

    2009-09-01

    The pharmaceutical industry is seen as seducing doctors by providing expensive gifts, subsidising travel and underwriting practice expenses in return for those doctors prescribing products that otherwise they would not use. This paints doctors in a very negative light; suggests doctors are available to the highest bidder; implies doctors do not adequately act as independent agents; and that doctors are driven more by self-interest than by patient needs. Similar practices, in other industries, are accepted as normal business behaviour but it is automatically assumed to be improper if the pharmaceutical industry supports doctors. Should the pharmaceutical industry withdraw educational grants then there would be: fewer scientific meetings; reduced attendance at conferences; limited post graduate education; and a depreciated level of maintenance of professional standards. To suggest that doctors prescribe inappropriately in return for largesse maligns their integrity but where there is no scientific reason to choose between different treatments then there can be little argument against selecting the product manufactured by a company that has invested in the doctor and the question arises as to whether this represents bad medicine? This paper will examine what constitutes non-professional conduct in response to inducements by the pharmaceutical industry. It will review: conflict of interest; relationships between doctors and pharma and the consequences for patients; and the need for critical appraisal before automatically decrying this relationship while accepting that there remain those who do not practice ethical medicine.

  14. Chemicals for worldwide aquaculture

    USGS Publications Warehouse

    Schnick, R.A.

    1991-01-01

    Regulations and therapeutants or other safe chemicals that are approved or acceptable for use in the aquaculture industry in the US, Canada, Europe and Japan are presented, discussing also compounds that are unacceptable for aquaculture. Chemical use practices that could affect public health are considered and details given regarding efforts to increase the number of registered and acceptable chemicals.

  15. One practice's experiment in refusing detail rep visits.

    PubMed

    Evans, David V; Hartung, Daniel M; Andeen, Gabriel; Mahler, Jo; Haxby, Dean G; Kraemer, Dale F; Fagnan, Lyle J

    2011-08-01

    The physician-pharmaceutical industry relationship has come under increasing scrutiny. Little guidance exists concerning how smaller practices should manage this relationship.In 2006, Madras Medical Group, a small family practice in rural Oregon, implemented a policy prohibiting visits from representatives of the pharmaceutical industry and the acceptance of drug samples. This qualitative study documents the attitudes of clinic personnel in response to this policy. Semistructured interviews were conducted using standardized questions related to 4 areas of policy perception: verification of policy decision, impact on clinic operations,influence of pharmaceutical industry, and lessons to share. Common themes were identified. Three physicians and 3 nurses participated in the study. There was consensus on the existence and effectiveness of the clinic policy. Key themes identified from both groups of interviewees included the perception of enhanced clinic operation after eliminating interruptions from pharmaceutical representatives, positive response from the public, and reduced diversion of samples for personal use. Clinicians interviewed agreed that samples were of questionable benefit,that information obtained from industry representatives was incomplete or of questionable veracity or objectivity, and that it was helpful to substitute other drug information sources and clinic-sponsored lunches for past industry offerings. In this case study, a policy prohibiting pharmaceutical representatives from a small family practice was well accepted and a source of pride among physicians and nurses. Other clinics wishing to enact a similar policy may wish to supplement their efforts by proactively using other sources of drug information.

  16. A Lesson Plan for the Enhancement of Training and Research in Academia by the Adaptation and Adoption of Good Laboratory Practice Guidelines

    ERIC Educational Resources Information Center

    Sitaraman, Ramakrishnan

    2010-01-01

    The implementation of good laboratory practices (GLPs) is recognized by the biotechnology and pharmaceutical industries as being critical for ensuring the international acceptability of products. However, as universities and colleges (and research organizations) do not necessarily work under similar constraints, actual laboratory practices vary…

  17. Evaluating Industry Payments Among Dermatology Clinical Practice Guidelines Authors.

    PubMed

    Checketts, Jake X; Sims, Matthew Thomas; Vassar, Matt

    2017-12-01

    It is well documented that financial conflicts of interest influence medical research and clinical practice. Prior to the Open Payments provisions of the Affordable Care Act, financial ties became apparent only through self-disclosure. The nature of financial interests has not been studied among physicians who develop dermatology clinical practice guidelines. To evaluate payments received by physicians who author dermatology clinical practice guidelines, compare disclosure statements for accuracy, determine whether pharmaceutical companies from which the authors received payments manufactured products related to the guidelines, and examine the extent to which the American Academy of Dermatology enforced their Administrative Regulations for guideline development. Three American Academy of Dermatology guidelines published from 2013 to 2016 were retrieved. Double data extraction was used to record financial payments received by 49 guideline authors using the Open Payments database. Payments received by the authors from the date of the initial literature search to the date of publication were used to evaluate disclosure statement accuracy, detail the companies providing payments, and evaluate Administrative Regulations enforcement. This study is applicable to clinical practice guideline panels drafting recommendations, physicians using clinical practice guidelines to inform patient care, and those establishing policies for guideline development. Our main outcomes are the monetary values and types of payments received by physicians who author dermatology guidelines and the accuracy of disclosure statements. Data were collected from the Open Payments database and analyzed descriptively. Of the 49 authors evaluated, 40 received at least 1 reported industry payment, 31 accepted more than $1000, 25 accepted more than $10 000, and 18 accepted more than $50 000. Financial payments amounted to a mean of $157 177 per author. The total reimbursement among the 49 authors from 2013 to 2015 was $7 701 681. Of the 40 authors receiving payments, 22 did not accurately disclose industry relationships. Authors received payments from companies with products directly related to the guideline topic. Violations to the Administrative Regulations were found. Dermatology clinical practice guideline authors received sizable industry payments and did not completely disclose these payments. The American Academy of Dermatology policies may benefit from stricter enforcement or the adoption of new standards.

  18. 40 CFR 63.10895 - What are my standards and management practices?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... system must meet accepted engineering standards, such as those published by the American Conference of Governmental Industrial Hygienists. (c) You must not discharge to the atmosphere emissions from any metal...

  19. 40 CFR 63.10895 - What are my standards and management practices?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... system must meet accepted engineering standards, such as those published by the American Conference of Governmental Industrial Hygienists. (c) You must not discharge to the atmosphere emissions from any metal...

  20. 40 CFR 63.10895 - What are my standards and management practices?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... system must meet accepted engineering standards, such as those published by the American Conference of Governmental Industrial Hygienists. (c) You must not discharge to the atmosphere emissions from any metal...

  1. 30 CFR 250.456 - What safe practices must the drilling fluid program follow?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... circulate a volume of drilling fluid equal to the annular volume with the drill pipe just off-bottom. You... volume needed to fill the hole. Both sets of numbers must be posted near the driller's station. You must... industry-accepted practices and include density, viscosity, and gel strength; hydrogenion concentration...

  2. 30 CFR 250.456 - What safe practices must the drilling fluid program follow?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... circulate a volume of drilling fluid equal to the annular volume with the drill pipe just off-bottom. You... volume needed to fill the hole. Both sets of numbers must be posted near the driller's station. You must... industry-accepted practices and include density, viscosity, and gel strength; hydrogenion concentration...

  3. 30 CFR 250.456 - What safe practices must the drilling fluid program follow?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... circulate a volume of drilling fluid equal to the annular volume with the drill pipe just off-bottom. You... volume needed to fill the hole. Both sets of numbers must be posted near the driller's station. You must... industry-accepted practices and include density, viscosity, and gel strength; hydrogenion concentration...

  4. Framework for managing mycotoxin risks in the food industry.

    PubMed

    Baker, Robert C; Ford, Randall M; Helander, Mary E; Marecki, Janusz; Natarajan, Ramesh; Ray, Bonnie

    2014-12-01

    We propose a methodological framework for managing mycotoxin risks in the food processing industry. Mycotoxin contamination is a well-known threat to public health that has economic significance for the food processing industry; it is imperative to address mycotoxin risks holistically, at all points in the procurement, processing, and distribution pipeline, by tracking the relevant data, adopting best practices, and providing suitable adaptive controls. The proposed framework includes (i) an information and data repository, (ii) a collaborative infrastructure with analysis and simulation tools, (iii) standardized testing and acceptance sampling procedures, and (iv) processes that link the risk assessments and testing results to the sourcing, production, and product release steps. The implementation of suitable acceptance sampling protocols for mycotoxin testing is considered in some detail.

  5. Nasreya: a treatment and disposal facility for industrial hazardous waste in Alexandria, Egypt: phase I.

    PubMed

    Ramadan, Adham R; Kock, Per; Nadim, Amani

    2005-04-01

    A facility for the treatment and disposal of industrial hazardous waste has been established in Alexandria, Egypt. Phase I of the facility encompassing a secure landfill and solar evaporation ponds is ready to receive waste, and Phase II encompassing physico-chemical treatment, solidification, and interim storage is underway. The facility, the Nasreya Centre, is the first of its kind in Egypt, and represents the nucleus for the integration, improvement and further expansion of different hazardous waste management practices and services in Alexandria. It has been developed within the overall legal framework of the Egyptian Law for the Environment, and is expected to improve prospects for enforcement of the regulatory requirements specified in this law. It has been developed with the overall aim of promoting the establishment of an integrated industrial hazardous waste management system in Alexandria, serving as a demonstration to be replicated elsewhere in Egypt. For Phase I, the Centre only accepts inorganic industrial wastes. In this respect, a waste acceptance policy has been developed, which is expected to be reviewed during Phase II, with an expansion of the waste types accepted.

  6. 30 CFR 250.456 - What safe practices must the drilling fluid program follow?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... fluid. You must circulate a volume of drilling fluid equal to the annular volume with the drill pipe... fluid volume needed to fill the hole. Both sets of numbers must be posted near the driller's station... warrant. Your tests must conform to industry-accepted practices and include density, viscosity, and gel...

  7. ROMI-RIP: Rough Mill RIP-first simulator user's guide

    Treesearch

    R. Edward Thomas

    1995-01-01

    The ROugh Mill RIP-first simulator (ROMI-RIP) is a computer software package for IBM compatible personal computers that simulates current industrial practices for gang-ripping lumber. This guide shows the user how to set and examine the results of simulations regarding current or proposed mill practices. ROMI-RIP accepts cutting bills with up to 300 different part...

  8. Development of Graduate Course Education by Industry Collaboration in Center for Engineering Education Development, CEED

    NASA Astrophysics Data System (ADS)

    Noguchi, Toru; Yoshikawa, Kozo; Nakamura, Masato; Kaneko, Katsuhiko

    New education programs for engineering graduate courses, and the achievements are described. Following the previous reports on overseas and domestic internship2) , 3) , this article states other common programs ; seminars on state of technologies in industries, practical English and internationalization programs, and a program to accept overseas internship students. E-learning system to assist off-campus students is also described. All these programs are developed and conducted by specialist professors invited from industries and national institutions, in collaboration with faculty professors. Students learn how the engineering science apply to the practical problems, acquire wider view and deeper understanding on industries, and gain abilities to act in global society including communication skill, those are not taught in classrooms and laboratories. Educational effects of these industry collaborated programs is significant to activate the graduate course education, although the comprehensive evaluation is the future subject.

  9. 36 CFR 1192.4 - Miscellaneous instructions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... 1192.4 Section 1192.4 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS... engineering tolerances for material properties and field conditions, including normal anticipated wear not exceeding accepted industry-wide standards and practices. (c) Notes. The text of these guidelines does not...

  10. Influence of manufacturing practices on quality of pharmaceutical products manufactured in Kenya.

    PubMed

    Orwa, J A; Keter, L K; Ouko, S P A; Kibwage, I O; Rukunga, G M

    2004-06-01

    To establish the quality of pharmaceutical products manufactured by the respective industries in Kenya and determine the effect of manufacturing practices on the quality of these products. Cross-sectional study. Industries examined are in Nairobi, Kenya. Laboratory analysis was carried out using available facilities at Kenya Medical Research Institute and University of Nairobi, Faculty of Pharmacy. Structured Questionnaires were administered to examine how the code of good manufacturing practices has been used in the production of each pharmaceutical product by respective companies. Questionnaires designed to evaluate the distribution and carry out limited post-market surveillance study were administered to community pharmacy outlets. Drugs were sampled and analyzed for their quality according to the respective monographs. The questionnaires administered to the industry included the source of raw materials, quarantine procedure before and after manufacture, manufacturing procedure, quality audit, quality assurance procedure, equipment, and staff. That administered to the pharmacy outlet included availability, affordability and acceptability of locally manufactured pharmaceutical products. Quality analysis of products involved the establishment of the chemical content, dissolution profile, friability, uniformity of weight and identity. For antibiotic suspensions the stability after reconstitution was also determined. There were 15 respondents and two non-respondents from the industry and six out of nine respondents from the pharmacy outlets. The ratio of qualified staff to product range produced seemed to influence product quality. Industries producing several products with only limited number of pharmaceutical staff had more products failing to comply with pharmacopoeia specifications compared to those producing only few products. Nevertheless, all companies are well equipped with quality control equipment, in accordance with type of product manufactured. Private pharmacies stocked few of the locally manufactured products. The reason, they said, was due to low doctor and/or patient acceptance. Compliance with quality specifications as set out in respective monographs was overall 76%. Although the local pharmaceutical industries have adopted good manufacturing practices leading to many good quality products currently in commerce, these manufacturing practices are not comprehensive and measures need to be taken to continue improving them.

  11. ROMI-3: Rough-Mill Simulator Version 3.0: User's Guide

    Treesearch

    Joel M. Weiss; R. Edward Thomas; R. Edward Thomas

    2005-01-01

    ROMI-3 Rough-Mill Simulator is a software package that simulates current industrial practices for rip-first and chop-first lumber processing. This guide shows the user how to set up and examine the results of simulations of current or proposed mill practices. ROMI-3 accepts cutting bills with as many as 600 combined solid and/or panel part sizes. Plots of processed...

  12. Industrial paramedics, out on site but not out of mind.

    PubMed

    Acker, Joseph J; Johnston, Tania M; Lazarsfeld-Jensen, Ann

    2014-01-01

    Australian natural resource exploration and production companies are employing paramedics to provide emergency medical response, primary health care, injury prevention, and health promotion services in remote locations nationally and internationally. Although Australian paramedic practice has steadily evolved to include increasingly complex medical interventions in the prehospital setting, paramedics are not yet registered health professionals, and in many states and territories their title is not protected. Similarly, tertiary-level education is becoming the entry to practice standard for traditional ambulance paramedics; however, certificate- and diploma-level paramedic courses remain an acceptable pathway to private and industrial paramedic jobs. To ensure acceptable patient safety standards are maintained and to protect all related stakeholders, the role, skills, training, and professional capacity of industrial paramedics must be defined. The study objective was to explore the published literature for a definition for the discipline of industrial paramedicine. A comprehensive systematic analysis was conducted using the EBSCOhost (health), MEDLINE, SCOPUS, and CINAHL electronic databases. The primary search terms "remote", "offshore", "mining", and "oil" were combined with the secondary search terms "paramedic" and "emergency medical services". An initial search using the combined two-term sets identified 870 citations. After application of the inclusion and exclusion criteria to a title and abstract review, 69 citations met the criteria including those discovered by searching the reference lists. Of these, nine citations were excluded because full-text papers could not be found and eight citations were excluded based on review of the full article. The result was 40 articles that discuss the role of paramedics in the remote or offshore environment (ROP) and 12 articles that discuss the provision of emergency medical services in the mining or oil and gas sectors (MOEMS). There is no single definition or comprehensive role description for industrial paramedic practice within the literature. Worldwide, there is little high-quality published evidence to adequately reflect all aspects of industrial paramedic practice. However, based on the literature available, this definition is offered: 'An industrial paramedic is an advanced clinical practitioner in paramedicine with an expanded scope of practice. The industrial paramedic provides emergency response, primary health care, chronic disease management, injury prevention, health promotion, medical referral, and repatriation coordination at remote mining sites, offshore installations, and other isolated industry settings. The industrial paramedic is resourceful, adaptable, and comfortable working independently. Industrial paramedics practice on site with limited resources, remotely located from tertiary care, and use telemedicine to consult with other health professionals as required. Industrial paramedics are experts at rapidly assessing, prioritising, and establishing control in their unpredictable workspace to reduce risks and create an environment conducive to quality patient care. The industrial paramedic preferably holds a specialised tertiary qualification and is committed to maintaining their clinical competency through continuing professional development.' Further research is required to validate, refute, or expand this proposed definition.

  13. 24 CFR 3280.304 - Materials.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...—Structural Glued Laminated Timber—ANSI/AITC A190.1-1992. Construction and Industrial Plywood (With Typical... shall comply with these requirements. (3) Engineering analysis and testing methods contained in these references shall be utilized to judge conformance with accepted engineering practices required in § 3280.303...

  14. 24 CFR 3280.304 - Materials.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...—Structural Glued Laminated Timber—ANSI/AITC A190.1-1992. Construction and Industrial Plywood (With Typical... shall comply with these requirements. (3) Engineering analysis and testing methods contained in these references shall be utilized to judge conformance with accepted engineering practices required in § 3280.303...

  15. 25 CFR 175.24 - Utility responsibilities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Utility responsibilities. 175.24 Section 175.24 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN ELECTRIC POWER UTILITIES... accordance with accepted industry practice; (c) Exercise reasonable care in protecting customer-owned...

  16. 25 CFR 175.24 - Utility responsibilities.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Utility responsibilities. 175.24 Section 175.24 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN ELECTRIC POWER UTILITIES... accordance with accepted industry practice; (c) Exercise reasonable care in protecting customer-owned...

  17. 25 CFR 175.24 - Utility responsibilities.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Utility responsibilities. 175.24 Section 175.24 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN ELECTRIC POWER UTILITIES... accordance with accepted industry practice; (c) Exercise reasonable care in protecting customer-owned...

  18. 25 CFR 175.24 - Utility responsibilities.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Utility responsibilities. 175.24 Section 175.24 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN ELECTRIC POWER UTILITIES... accordance with accepted industry practice; (c) Exercise reasonable care in protecting customer-owned...

  19. Tobacco industry research on smoking cessation. Recapturing young adults and other recent quitters.

    PubMed

    Ling, Pamela M; Glantz, Stanton A

    2004-05-01

    Smoking rates are declining in the United States, except for young adults (age 18 to 24). Few organized programs target smoking cessation specifically for young adults, except programs for pregnant women. In contrast, the tobacco industry has invested much time and money studying young adult smoking patterns. Some of these data are now available in documents released through litigation. Review tobacco industry marketing research on smoking cessation to guide new interventions and improve clinical practice, particularly to address young adult smokers' needs. Analysis of previously secret tobacco industry documents. Compared to their share of the smoking population, young adult smokers have the highest spontaneous quitting rates. About 10% to 30% of smokers want to quit; light smokers and brand switchers are more likely to try. Tobacco companies attempted to deter quitting by developing products that appeared to be less addictive or more socially acceptable. Contrary to consumer expectations, "ultra low tar" cigarette smokers were actually less likely to quit. Tobacco industry views of young adult quitting behavior contrast with clinical practice. Tobacco marketers concentrate on recapturing young quitters, while organized smoking cessation programs are primarily used by older smokers. As young people have both the greatest propensity to quit and the greatest potential benefits from smoking cessation, targeted programs for young adults are needed. Tobacco marketing data suggest that aspirational messages that decrease the social acceptability of smoking and support smoke-free environments resonate best with young adult smokers' motivations.

  20. Tobacco Industry Research on Smoking Cessation

    PubMed Central

    Ling, Pamela M; Glantz, Stanton A

    2004-01-01

    BACKGROUND Smoking rates are declining in the United States, except for young adults (age 18 to 24). Few organized programs target smoking cessation specifically for young adults, except programs for pregnant women. In contrast, the tobacco industry has invested much time and money studying young adult smoking patterns. Some of these data are now available in documents released through litigation. OBJECTIVE Review tobacco industry marketing research on smoking cessation to guide new interventions and improve clinical practice, particularly to address young adult smokers’ needs. METHODS Analysis of previously secret tobacco industry documents. RESULTS Compared to their share of the smoking population, young adult smokers have the highest spontaneous quitting rates. About 10% to 30% of smokers want to quit; light smokers and brand switchers are more likely to try. Tobacco companies attempted to deter quitting by developing products that appeared to be less addictive or more socially acceptable. Contrary to consumer expectations, “ultra low tar” cigarette smokers were actually less likely to quit. CONCLUSIONS Tobacco industry views of young adult quitting behavior contrast with clinical practice. Tobacco marketers concentrate on recapturing young quitters, while organized smoking cessation programs are primarily used by older smokers. As young people have both the greatest propensity to quit and the greatest potential benefits from smoking cessation, targeted programs for young adults are needed. Tobacco marketing data suggest that aspirational messages that decrease the social acceptability of smoking and support smoke-free environments resonate best with young adult smokers’ motivations. PMID:15109339

  1. JPRS Report, Near East and South Asia.

    DTIC Science & Technology

    1989-07-11

    stan for all practical purposes has accepted the Indian hegemony", a fact which is in negation of our existence. Now when Indonesians, Malaysians ...excise revenues. And the rigid censorship, along with high cinema tickets because of heavy taxes, killed the film industry and the large revenues

  2. 26 CFR 1.281-3 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... determined by accepted industry practice. The fact that nonterminal businesses may also provide such services..., car rental facilities, or other similar facilities for passengers, in waiting rooms or along passenger... the general public on the terminal premises or from the sorting of mail in a railroad box car. (3...

  3. Telecommuting in the 21st Century: An Examination of Managerial Attitudes

    ERIC Educational Resources Information Center

    Broman, Noel C.

    2014-01-01

    Telecommuting has become a strategic benefit for modern companies to lower costs and to improve productivity and efficiency. People in industries such as information technology consider telecommuting to be acceptable work practice. Telecommuting provides many benefits for some organizations. In this study, the researcher examined whether there are…

  4. Applying Industrial Design Best Practices in the Acquisition of Soldier Equipment

    DTIC Science & Technology

    2002-03-01

    their meal when it is included. Presently, the US Army is considering a complete change of uniform if for no other reason, the soldier will feel...to increase soldier acceptance of equipment. The conclusion provides recommendations to program managers on how they can design a good product, what...

  5. Meeting the requirements of importing countries: practice and policy for on-farm approaches to food safety.

    PubMed

    Dagg, P J; Butler, R J; Murray, J G; Biddle, R R

    2006-08-01

    In light of the increasing consumer demand for safe, high-quality food and recent public health concerns about food-borne illness, governments and agricultural industries are under pressure to provide comprehensive food safety policies and programmes consistent with international best practice. Countries that export food commodities derived from livestock must meet both the requirements of the importing country and domestic standards. It is internationally accepted that end-product quality control, and similar methods aimed at ensuring food safety, cannot adequately ensure the safety of the final product. To achieve an acceptable level of food safety, governments and the agricultural industry must work collaboratively to provide quality assurance systems, based on sound risk management principles, throughout the food supply chain. Quality assurance systems on livestock farms, as in other parts of the food supply chain, should address food safety using hazard analysis critical control point principles. These systems should target areas including biosecurity, disease monitoring and reporting, feedstuff safety, the safe use of agricultural and veterinary chemicals, the control of potential food-borne pathogens and traceability. They should also be supported by accredited training programmes, which award certification on completion, and auditing programmes to ensure that both local and internationally recognised guidelines and standards continue to be met. This paper discusses the development of policies for on-farm food safety measures and their practical implementation in the context of quality assurance programmes, using the Australian beef industry as a case study.

  6. Management Training in the Distributive Trades.

    ERIC Educational Resources Information Center

    National Economic Development Office, London (England).

    This booklet examines briefly the practical justification for planned training in the distributive trades; describes what and who should be trained; and indicates the steps needed to design a system of training which the Industrial Training Board for the Distributive Trades will find acceptable and grant-worthy. It is divided into three parts:…

  7. Experiences in Teaching a Graduate Course on Model-Driven Software Development

    ERIC Educational Resources Information Center

    Tekinerdogan, Bedir

    2011-01-01

    Model-driven software development (MDSD) aims to support the development and evolution of software intensive systems using the basic concepts of model, metamodel, and model transformation. In parallel with the ongoing academic research, MDSD is more and more applied in industrial practices. After being accepted both by a broad community of…

  8. 7 CFR Appendix D to Subpart E of... - Alcohol Production Facilities Planning, Performing, Development and Project Control

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... (CONTINUED) GENERAL Business and Industrial Loan Program Pt. 1980, Subpt. E, App. D Appendix D to Subpart E... designed utilizing accepted engineering practices and are conformed to applicable Federal, State and local... this appendix. (II) Technical Services. (A) The borrower is responsible for selecting engineering...

  9. 26 CFR 1.6694-2 - Penalty for understatement due to an unreasonable position.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... time the advice was given. (6) Reliance on generally accepted administrative or industry practice. The... investigate or ascertain) in the formulation of the advice, or the preparation of the return or claim for... upon information furnished by the taxpayer and information and advice furnished by another advisor...

  10. Investigating the state of physiologically based kinetic modelling practices and challenges associated with gaining regulatory acceptance of model applications

    EPA Science Inventory

    Physiologically based kinetic (PBK) models are used widely throughout a number of working sectors, including academia and industry, to provide insight into the dosimetry related to observed adverse health effects in humans and other species. Use of these models has increased over...

  11. Usage of Alternative, Environmentally Acceptable Materials—Experience from Eastern Croatia

    NASA Astrophysics Data System (ADS)

    Barišić, I.; Zagvozda, M.; Dimter, S.

    2015-11-01

    The concept of sustainability should be the main guiding principle in the construction industry today. It mandates conservation of natural resources and thus lower impact on the environment. In road construction, part of construction industry that consumes largest quantities of natural materials, sustainable building and maintenance of roads is possible trough application of secondary materials. Usage of industrial and construction waste presents energy, ecologically and financially effective alternative. Republic of Croatia, even as a new member of the European Union, still lags behind the well-established practices of the application of alternative materials in different European countries. The reasons for this can be found in the current legal and technical regulations for alternative materials. In this paper, the existing regulations for alternative materials and the impact they have on the application of these materials in practice in the region of eastern Croatia will be shown.

  12. Cigarettes, social reinforcement, and culture: a commentary on "Tobacco as a social currency: cigarette gifting and sharing in China".

    PubMed

    Ding, Ding; Hovell, Melbourne F

    2012-03-01

    As Rich and Xiao suggested, cigarette sharing and gifting play an important role in China's smoking epidemic. Understanding the cultural roots, history, and impacts of such practices should be emphasized in tobacco control efforts. "Tobacco as a social currency" is a consequence of the tobacco industry usurping traditional values and cultural customs to make cigarette gifting acceptable, desirable, and socially reinforcing. The cigarettes-social reinforcement link created by the tobacco industry can be broken by deglamorizing smoking and cigarette gifting and by reinforcing alternative healthful behaviors. A behavioral ecological perspective, with an emphasis of understanding and engineering cultures, should guide future health promotion efforts to reduce smoking and other risk practices in China.

  13. Ghost marketing: pharmaceutical companies and ghostwritten journal articles.

    PubMed

    Moffatt, Barton; Elliott, Carl

    2007-01-01

    The use of ghostwriters by industry is subject to increasing public attention and scrutiny. This article addresses the practice and ethics of scientific ghostwriting. We focus on the type of ghostwriting that involves a pharmaceutical company hiring a medical education and communications company to write a paper favorable of their product, who then hires a well-known academic to publish it under his or her name without disclosing the paper's true origins. We argue that this practice is harmful both to the public and to the institutions of science and that it is not justified by an analogy to accepted scientific authorship practices. Finally, we consider ways to discourage the practice.

  14. Evaluation of lumber recycled from an industrial military building

    Treesearch

    R. H. Falk; D. W. Green; S. C. Lantz

    1999-01-01

    During the past century, millions of structures were built from sawn lumber and timber. When these structures reach the end of their service lives, contemporary practices emphasize landfill disposal. In recent years, the public has expressed a strong interest in developing environmentally acceptable and efficient reuse options for this solid-wood material. As a result...

  15. Orientation Manual for Child Care Centres Involved in the Recognition of Overseas Trained Workers.

    ERIC Educational Resources Information Center

    l'Anson, Christine, Comp.; Harris, Liz, Comp.

    This manual has been primarily developed to assist child care center staff who are involved in the process of the recognition of the qualifications of overseas workers within the child care industry in Western Australia. The information and practical exercises provided aim to increase staff's level of awareness and acceptance of cultural…

  16. Challenges and prospects of xylitol production with whole cell bio-catalysis: A review.

    PubMed

    Dasgupta, Diptarka; Bandhu, Sheetal; Adhikari, Dilip K; Ghosh, Debashish

    2017-04-01

    Xylitol, as an alternative low calorie sweetener is well accepted in formulations of various confectioneries and healthcare products. Worldwide it is industrially produced by catalytic hydrogenation of pure d-xylose solution under high temperature and pressure. Biotechnological xylitol production is a potentially attractive replacement for chemical process, as it occurs under much milder process conditions and can be based on sugar mixtures derived from low-cost industrial and agri-waste. However, microbial fermentation route of xylitol production is not so far practiced industrially. This review highlights the challenges and prospects of biotechnological xylitol production considering possible genetic modifications of fermenting microorganisms and various aspects of industrial bioprocessing and product downstreaming. Copyright © 2017 Elsevier GmbH. All rights reserved.

  17. Lifetime evaluation of large format CMOS mixed signal infrared devices

    NASA Astrophysics Data System (ADS)

    Linder, A.; Glines, Eddie

    2015-09-01

    New large scale foundry processes continue to produce reliable products. These new large scale devices continue to use industry best practice to screen for failure mechanisms and validate their long lifetime. The Failure-in-Time analysis in conjunction with foundry qualification information can be used to evaluate large format device lifetimes. This analysis is a helpful tool when zero failure life tests are typical. The reliability of the device is estimated by applying the failure rate to the use conditions. JEDEC publications continue to be the industry accepted methods.

  18. Safety cases for medical devices and health information technology: involving health-care organisations in the assurance of safety.

    PubMed

    Sujan, Mark A; Koornneef, Floor; Chozos, Nick; Pozzi, Simone; Kelly, Tim

    2013-09-01

    In the United Kingdom, there are more than 9000 reports of adverse events involving medical devices annually. The regulatory processes in Europe and in the United States have been challenged as to their ability to protect patients effectively from unreasonable risk and harm. Two of the major shortcomings of current practice include the lack of transparency in the safety certification process and the lack of involvement of service providers. We reviewed recent international standardisation activities in this area, and we reviewed regulatory practices in other safety-critical industries. The review showed that the use of safety cases is an accepted practice in UK safety-critical industries, but at present, there is little awareness of this concept in health care. Safety cases have the potential to provide greater transparency and confidence in safety certification and to act as a communication tool between manufacturers, service providers, regulators and patients.

  19. Interactions with the pharmaceutical industry: a survey of family medicine residents in Ontario.

    PubMed Central

    Sergeant, M D; Hodgetts, P G; Godwin, M; Walker, D M; McHenry, P

    1996-01-01

    OBJECTIVE: To determine the attitudes, knowledge and practices of family medicine residents relating to the pharmaceutical industry and to assess the effectiveness of existing guidelines on appropriate interactions with the pharmaceutical industry. DESIGN: Survey by mailed questionnaire. SETTING: Ontario. PARTICIPANTS: All 262 second-year family medicine residents in Ontario (seven centres); 226 (86.3%) responded. RESULTS: Fifty-two (23.0%) of the residents who responded stated that they had read the CMA policy statement on appropriate interactions between physicians and the pharmaceutical industry. A total of 124 (54.9%) stated that they would attend a private dinner paid for by a pharmaceutical representative; the proportion was not significantly reduced among those who had read the CMA guidelines, which prohibit the acceptance of personal gifts. In all, 186 (82.3%) reported that they would like the opportunity to interact with pharmaceutical representatives in an educational setting, even though several programs now discourage these interactions. Approximately three quarters (172/226 [76.1%]) of the residents indicated that they plan to see pharmaceutical representatives in their future practice. Residents at Centre 2 were significantly more critical of the pharmaceutical industry than those from the other centres. Overall, being aware of, and familiar with, departmental policy or CMA policy on interactions with the pharmaceutical industry did not affect the residents' attitudes or intended future practices. CONCLUSION: The presence of guidelines concerning physicians' interactions with the pharmaceutical industry does not appear to have a significant impact on family medicine residents in Ontario. PMID:8911290

  20. Interactions between non-physician clinicians and industry: a systematic review.

    PubMed

    Grundy, Quinn; Bero, Lisa; Malone, Ruth

    2013-11-01

    With increasing restrictions placed on physician-industry interactions, industry marketing may target other health professionals. Recent health policy developments confer even greater importance on the decision making of non-physician clinicians. The purpose of this systematic review is to examine the types and implications of non-physician clinician-industry interactions in clinical practice. We searched MEDLINE and Web of Science from January 1, 1946, through June 24, 2013, according to PRISMA guidelines. Non-physician clinicians eligible for inclusion were: Registered Nurses, nurse prescribers, Physician Assistants, pharmacists, dieticians, and physical or occupational therapists; trainee samples were excluded. Fifteen studies met inclusion criteria. Data were synthesized qualitatively into eight outcome domains: nature and frequency of industry interactions; attitudes toward industry; perceived ethical acceptability of interactions; perceived marketing influence; perceived reliability of industry information; preparation for industry interactions; reactions to industry relations policy; and management of industry interactions. Non-physician clinicians reported interacting with the pharmaceutical and infant formula industries. Clinicians across disciplines met with pharmaceutical representatives regularly and relied on them for practice information. Clinicians frequently received industry "information," attended sponsored "education," and acted as distributors for similar materials targeted at patients. Clinicians generally regarded this as an ethical use of industry resources, and felt they could detect "promotion" while benefiting from industry "information." Free samples were among the most approved and common ways that clinicians interacted with industry. Included studies were observational and of varying methodological rigor; thus, these findings may not be generalizable. This review is, however, the first to our knowledge to provide a descriptive analysis of this literature. Non-physician clinicians' generally positive attitudes toward industry interactions, despite their recognition of issues related to bias, suggest that industry interactions are normalized in clinical practice across non-physician disciplines. Industry relations policy should address all disciplines and be implemented consistently in order to mitigate conflicts of interest and address such interactions' potential to affect patient care. Please see later in the article for the Editors' Summary.

  1. The acceptance of in silico models for REACH: Requirements, barriers, and perspectives

    PubMed Central

    2011-01-01

    In silico models have prompted considerable interest and debate because of their potential value in predicting the properties of chemical substances for regulatory purposes. The European REACH legislation promotes innovation and encourages the use of alternative methods, but in practice the use of in silico models is still very limited. There are many stakeholders influencing the regulatory trajectory of quantitative structure-activity relationships (QSAR) models, including regulators, industry, model developers and consultants. Here we outline some of the issues and challenges involved in the acceptance of these methods for regulatory purposes. PMID:21982269

  2. ROMI 4.0: Rough mill simulator 4.0 users manual

    Treesearch

    R. Edward Thomas; Timo Grueneberg; Urs Buehlmann

    2015-01-01

    The Rough MIll simulator (ROMI Version 4.0) is a computer software package for personal computers (PCs) that simulates current industrial practices for rip-first, chop-first, and rip and chop-first lumber processing. This guide shows how to set up the software; design, implement, and execute simulations; and examine the results. ROMI 4.0 accepts cutting bills with as...

  3. Best practice workplace HIV/AIDS programmes in South Africa: A review of case studies and lessons learned

    PubMed Central

    2009-01-01

    ABSTRACT Background A group of experts attending a tripartite interregional meeting on best practices in HIV/AIDS workplace policies and programmes organised by the International Labour Organisation (ILO) in Geneva, Switzerland, identified 34 best practice workplace HIV programmes from across the world. Method The ten criteria that were used for reviewing best practice workplace HIV/AIDS programmes in South Africa include acceptability, accessibility, ethical soundness, perceived impact, relevance, appropriateness, innovativeness, efficiency, sustainability and replicability. Results More than one-third (35.3%) of the 34 best practice workplace interventions identified were found in businesses and industries in South Africa. This constitutes a significant and encouraging effort to deal with HIV/AIDS in the workplace. Approximately 16.7% of the best practice workplace HIV/AIDS interventions focused on policy and legal frameworks, 50% of these interventions focused on prevention, 16.7% provided links beyond the workplace and a further 16.7% were interventions that focused on knowledge and evidence. A third (33.3%) of practices were found in the mining industry, 16.7% in the motor industry, 16.7% from workers’ unions, and the rest (33.3%) were found in a sugar company, an electricity supply company, a pharmaceutical company and the ministry of Public Service and Administration. Conclusion It is encouraging that over one-third of all best practice workplace HIV interventions identified by the ILO experts were found in South Africa. The majority of these policies and programmes were focused on HIV prevention.

  4. Breaking up is hard to do: lessons learned from a pharma-free practice transformation.

    PubMed

    Evans, David; Hartung, Daniel M; Beasley, Denise; Fagnan, Lyle J

    2013-01-01

    Academic medical centers are examining relationships with the pharmaceutical industry and making changes to limit interactions. Most doctors, however, practice outside of academic institutions and see pharmaceutical detailers and accept drug samples and gifts. Little guidance for practicing physicians exists about transforming practices to become pharma-free. Consideration must be given to the impact on practice culture, staff views, and patient needs. A small private practice, setting out to transform into a pharma-free clinic, used a practice transformation process that examined the industry presence in the clinic, educated the doctors on potential conflicts of interest, and improved practice flow. Staff were given the opportunity to share concerns, and their issues were acknowledged. Educational interventions were developed to help providers keep current. Finally, efforts were made to educate patients about the policy. The clinic recorded the degree to which it was detailed. Loss of gifts, keeping current with new drugs, and managing without samples were noted concerns. Policy change champions developed strategies to address concerns. A shift in practice culture to a pharma-free clinic is achievable and maintainable over time. Barriers to success can be identified and overcome with attention given to careful gathering of information, staff input, and stakeholder education.

  5. Users' acceptance and attitude in regarding electronic medical record at central polyclinic of oil industry in Isfahan, Iran.

    PubMed

    Tavakoli, Nahid; Shahin, Arash; Jahanbakhsh, Maryam; Mokhtari, Habibollah; Rafiei, Maryam

    2013-01-01

    Simultaneous with the rapid changes in the technology and information systems, hospitals interest in using them. One of the most common systems in hospitals is electronic medical record (EMR) whose one of uses is providing better health care quality via health information technology. Prior to its use, attempts should be put to identifying factors affecting the acceptance, attitude and utilizing of this technology. The current article aimed to study the effective factors of EMR acceptance by technology acceptance model (TAM) at central polyclinic of Oil Industry in Isfahan. This was a practical, descriptive and regression study. The population research were all EMR users at polyclinic of Oil Industry in 2012 and its sampling was simple random with 62 users. The tool of data collection was a research-made questionnaire based on TAM. The validity of questionnaire has been assigned through the strategy of content validity and health information technology experts' views and its reliability by test-retest. The system users have positive attitude toward using EMR (56.6%). Also, users are not very satisfied with effective external (38.14%) and behavioral factors (47.8%) upon using the system. Perceived ease-of-use (PEU) and perceived usefulness (PU) were at a good level. Lack of relative satisfaction with using of EMR derives from factors such as appearance, screen, data and information quality and terminology. In this study, it is suggested to improve the system and the efficiency of the users through software' external factors development. So that PEU and users' attitude to be changed and moved in positive manner.

  6. A Biopharmaceutical Industry Perspective on the Control of Visible Particles in Biotechnology-Derived Injectable Drug Products.

    PubMed

    Mathonet, Serge; Mahler, Hanns-Christian; Esswein, Stefan T; Mazaheri, Maryam; Cash, Patricia W; Wuchner, Klaus; Kallmeyer, Georg; Das, Tapan K; Finkler, Christof; Lennard, Andrew

    2016-01-01

    Regulatory monographs in Europe and the United States require drug products for parenteral administration to be "practically free" or "essentially free" of visible particles, respectively. Both terms have been used interchangeably and acknowledge the probabilistic nature of visual particle inspection. The probability of seeing a particle in a drug product container varies according to the size and nature of the particles as well as container and inspection conditions. Therefore, the term "without visible particles" can be highly misleading in the context of what is practically achievable. This may lead to differences in understanding between industry practitioners and regulatory agencies. Is this term intended to mean "zero particles", or is there any intention to distinguish between particle type such as "zero extraneous visible particles" or "zero proteinaceous particles"? Furthermore, how can "zero" particles as a criterion for release testing be reconciled with "practically free from particles" as stated in the definition and a low, justified level of proteinaceous particles after production?The purpose of this position paper is to review best practices in the industry in terms of visual inspection process and associated operator training, quality control sampling, testing, and setting acceptance criteria corresponding to "practically free of visible particles" and providing considerations when visible proteinaceous particles are deemed unavoidable. It also provides a brief overview of visible particle characterization and gives perspectives on patient safety. This position paper applies to biotechnology-derived drug products including monoclonal antibodies in late-phase development to licensed products. In the 2011 monoclonal antibody monograph revision, European Pharmacopoeia experts acknowledged that protein products may also contain proteinaceous particles at release or that protein particles may form during storage. Indeed, industry experience has demonstrated that therapeutic proteins such as monoclonal antibodies can exhibit a propensity for self-association leading to the formation of aggregates that range in size from nanometres (oligomers) to microns (subvisible and visible particles). As a result, the requirement for drug product appearance for monoclonal antibodies was changed from "without visible particles" to "without visible particles unless otherwise authorised or justified". In our view, "practically free from particles" should be considered a suitable acceptance criterion for injectable biotechnology and small-molecule products, as long as appropriately defined. Furthermore, we argue that visual inspection is a suitable quality control release test and that "practically free from particles" is a suitable specification when adequately described. © PDA, Inc. 2016.

  7. Hunter-Prey Discourse: A Critical Discourse Analysis of the Online Posts of Men Who Buy Sex.

    PubMed

    Bounds, Dawn; Delaney, Kathleen R; Julion, Wrenetha

    The Internet has emerged as a major expediter of the commercial sex (CS) industry. While use of web-based CS industry sites is brisk, the full extent of their impact remains unclear particularly how they influence users' views of the CS industry. This research study sought to uncover the nuances of buyers' interactions on an online CS website. Six hundred sixty-six online posts from 363 unique members were collected and analyzed using critical discourse analysis. Via the use of language and dialogue, particular ways of thinking about and talking about buying sex are normalized and reinforced. Evident within these discursive patterns are mechanisms by which assumptions are forwarded, perceptions shaped, and authority established. Information about how CS industry websites establish beliefs, relationships, and practices among its users may increase understanding of how the CS industry seeks to gain acceptance in the American culture and normalize its activities.

  8. An investigation of the acceptance of solar heating and cooling in the housing industry in New Mexico

    NASA Technical Reports Server (NTRS)

    Lundahl, C. R.; Scott, J. C.; Dennis, D. M.

    1976-01-01

    A data base of information relating to the acceptability of solar-energy technology in the New Mexican housing industry was developed. Topics examined include: (1) the factors which influence the adoption of solar-energy systems in the New Mexican housing industry; (2) the degree of acceptability of various solar factors among New Mexican consumers, architects, contractors, financiers, energy suppliers, and governmental officials; and (3) the current attitudes toward the acceptability of solar energy factors in the New Mexican housing industry.

  9. PACS: acceptance test, quality control, warranty, and maintenance continuum

    NASA Astrophysics Data System (ADS)

    Romlein, John R.; Norton, Gary S.; Lyche, David K.; Richardson, Ronald R., Jr.

    1999-07-01

    As PACS gain greater acceptance and use in medical facilities the question of life cycle management must be addressed in terms that relate to the common business practices for medical information system and medical devices. The issues in life cycle management of such a system are relatively new to the industry. Increased use of PACS within the medical community requires that standardized life cycle management practices by developed and implemented. This paper develops a new of life cycle issues as cyclic and related events that are not only manageable, but also predictable in terms, of, frequency, duration data content, data exchange, potential outcomes, staffing requirement, documentation, and staff interaction. This view is presented as a continuum that begins at the acceptance testing of a PACS and continues throughout its life cycle. The continuum incorporates the required relationship between quality control testing and maintenance actions during warranty period and the maintenance years. Interrelated cyclic events are described that bind these processes together and provide a basis for long-term proactive management of PACS in a medical environment.

  10. Interactions between Non-Physician Clinicians and Industry: A Systematic Review

    PubMed Central

    Grundy, Quinn; Bero, Lisa; Malone, Ruth

    2013-01-01

    Background With increasing restrictions placed on physician–industry interactions, industry marketing may target other health professionals. Recent health policy developments confer even greater importance on the decision making of non-physician clinicians. The purpose of this systematic review is to examine the types and implications of non-physician clinician–industry interactions in clinical practice. Methods and Findings We searched MEDLINE and Web of Science from January 1, 1946, through June 24, 2013, according to PRISMA guidelines. Non-physician clinicians eligible for inclusion were: Registered Nurses, nurse prescribers, Physician Assistants, pharmacists, dieticians, and physical or occupational therapists; trainee samples were excluded. Fifteen studies met inclusion criteria. Data were synthesized qualitatively into eight outcome domains: nature and frequency of industry interactions; attitudes toward industry; perceived ethical acceptability of interactions; perceived marketing influence; perceived reliability of industry information; preparation for industry interactions; reactions to industry relations policy; and management of industry interactions. Non-physician clinicians reported interacting with the pharmaceutical and infant formula industries. Clinicians across disciplines met with pharmaceutical representatives regularly and relied on them for practice information. Clinicians frequently received industry “information,” attended sponsored “education,” and acted as distributors for similar materials targeted at patients. Clinicians generally regarded this as an ethical use of industry resources, and felt they could detect “promotion” while benefiting from industry “information.” Free samples were among the most approved and common ways that clinicians interacted with industry. Included studies were observational and of varying methodological rigor; thus, these findings may not be generalizable. This review is, however, the first to our knowledge to provide a descriptive analysis of this literature. Conclusions Non-physician clinicians' generally positive attitudes toward industry interactions, despite their recognition of issues related to bias, suggest that industry interactions are normalized in clinical practice across non-physician disciplines. Industry relations policy should address all disciplines and be implemented consistently in order to mitigate conflicts of interest and address such interactions' potential to affect patient care. Please see later in the article for the Editors' Summary PMID:24302892

  11. Practical Methodology for the Inclusion of Nonlinear Slosh Damping in the Stability Analysis of Liquid-Propelled Space Vehicles

    NASA Technical Reports Server (NTRS)

    Ottander, John A.; Hall, Robert A.; Powers, J. F.

    2018-01-01

    A method is presented that allows for the prediction of the magnitude of limit cycles due to adverse control-slosh interaction in liquid propelled space vehicles using non-linear slosh damping. Such a method is an alternative to the industry practice of assuming linear damping and relying on: mechanical slosh baffles to achieve desired stability margins; accepting minimal slosh stability margins; or time domain non-linear analysis to accept time periods of poor stability. Sinusoidal input describing functional analysis is used to develop a relationship between the non-linear slosh damping and an equivalent linear damping at a given slosh amplitude. In addition, a more accurate analytical prediction of the danger zone for slosh mass locations in a vehicle under proportional and derivative attitude control is presented. This method is used in the control-slosh stability analysis of the NASA Space Launch System.

  12. Accepting responsibility for long-term care--a paradox in times of a global nursing shortage?

    PubMed

    Hirschfeld, Miriam J

    2009-03-01

    Need for long-term care (LTC) is increasing globally, and nurses have a professional imperative to address the growing need for long-term care (LTC). The author reviews the effect of globalization and the epidemiologic transition upon the growing need for LTC. I also summarize the lessons learned in the developing world, as well as in the industrialized world, based on the existing research evidence. The purpose of this paper is to explain the need for nursing as a profession to accept responsibility for LTC as part of nursing's raison d'etre, despite the global nursing shortage. This includes responsibility for innovative policy, health service, practice, research, nursing education development, and health promotion, because prevention is key to slowing the steep increase in LTC needs. Nurses must develop strategies for clinical practice, management, education, and research in order to increase our ability to meet future needs for LTC.

  13. Beyond knowledge transfer: The social construction of autonomous academic science in university-industry agricultural biotechnology research collaborations

    NASA Astrophysics Data System (ADS)

    Biscotti, Dina Louise

    Autonomy is a social product. Although some might view autonomy as the absence of social interference in individual action, it is in fact produced through social institutions. It enables social actors to act; it is the justification for the allocation of enormous public resources into institutions classified as "public" or "nonprofit;" it can lead to innovation; and, significantly, it is key to the public acceptance of new technologies. In this dissertation, I analyze the social construction of autonomy for academic science in U.S. university-industry agricultural biotechnology research collaborations. University-industry relationships (UIRs) are a site of concern about the influence of commercial interests on academic science. Agricultural biotechnology is a contentious technology that has prompted questions about the ecological and public health implications of genetically-modified plants and animals. It has also spurred awareness of the industrialization of agriculture and accelerating corporate control of the global food system. Through analysis of in-depth interviews with over 200 scientists and administrators from nine U.S. research universities and thirty agricultural biotechnology companies, I find that both the academy and industry have a vested interest in the social construction of the academy as an autonomous space from which claims to objective, disinterested scientific knowledge can be made. These claims influence government regulation, as well as grower and public acceptance of agricultural biotechnology products. I argue that the social production of autonomy for academic science can be observed in narratives and practices related to: (1) the framing of when, how and why academic scientists collaborate with industry, (2) the meanings ascribed to and the uses deemed appropriate for industry monies in academic research, and (3) the dissemination of research results into the public domain through publications and patents. These narratives and practices constitute relational work and professional and organizational identity work. By elucidating the ongoing relational and identity work of UIR participants in the social construction of autonomous academic science, I seek to make the interdependencies between the state, experts and private economic interests more visible, specifically in terms of their collective interest in the status and public credibility of academic science.

  14. Changes in volatile composition and sensory attributes of wines during alcohol content reduction.

    PubMed

    Longo, Rocco; Blackman, John W; Torley, Peter J; Rogiers, Suzy Y; Schmidtke, Leigh M

    2017-01-01

    A desirable sensory profile is a major consumer driver for wine acceptability and should be considered during the production of reduced-alcohol wines. Although various viticultural practices and microbiological approaches show promising results, separation technologies such as membrane filtration, in particular reverse osmosis and evaporative perstraction, in addition to vacuum distillation, represent the most common commercial methods used to produce reduced-alcohol wine. However, ethanol removal from wine can result in a significant loss of volatile compounds such as esters (ethyl octanoate, ethyl acetate, isoamyl acetate) that contribute positively to the overall perceived aroma. These losses can potentially reduce the acceptability of the wine to consumers and decrease their willingness to purchase wines that have had their alcohol level reduced. The change in aroma as a result of the ethanol removal processes is influenced by a number of factors: the type of alcohol reduction process; the chemical-physical properties (volatility, hydrophobicity, steric hindrance) of the aroma compounds; the retention properties of the wine non-volatile matrix; and the ethanol level. This review identifies and summarises possible deleterious influences of the dealcoholisation process and describes best practice strategies to maintain the original wine composition. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  15. Advanced Combat Helmet Technical Assessment

    DTIC Science & Technology

    2013-05-29

    Lastly, we assessed the participation of various stakeholders and industry experts such as active ACH manufacturers and test facilities. Findings... industrially accepted American National Standards Institute (ANSI Z1.4-2008, Sampling Visit us on the web at www.dodig.mil Results in Brief Advanced...statistically principled approach and the lot acceptance test protocol adopts a widely established and industrially accepted sampling procedure. We

  16. Users’ acceptance and attitude in regarding electronic medical record at central polyclinic of oil industry in Isfahan, Iran

    PubMed Central

    Tavakoli, Nahid; Shahin, Arash; Jahanbakhsh, Maryam; Mokhtari, Habibollah; Rafiei, Maryam

    2013-01-01

    Introduction: Simultaneous with the rapid changes in the technology and information systems, hospitals interest in using them. One of the most common systems in hospitals is electronic medical record (EMR) whose one of uses is providing better health care quality via health information technology. Prior to its use, attempts should be put to identifying factors affecting the acceptance, attitude and utilizing of this technology. The current article aimed to study the effective factors of EMR acceptance by technology acceptance model (TAM) at central polyclinic of Oil Industry in Isfahan. Materials and Methods: This was a practical, descriptive and regression study. The population research were all EMR users at polyclinic of Oil Industry in 2012 and its sampling was simple random with 62 users. The tool of data collection was a research-made questionnaire based on TAM. The validity of questionnaire has been assigned through the strategy of content validity and health information technology experts’ views and its reliability by test-retest. Findings: The system users have positive attitude toward using EMR (56.6%). Also, users are not very satisfied with effective external (38.14%) and behavioral factors (47.8%) upon using the system. Perceived ease-of-use (PEU) and perceived usefulness (PU) were at a good level. Conclusion: Lack of relative satisfaction with using of EMR derives from factors such as appearance, screen, data and information quality and terminology. In this study, it is suggested to improve the system and the efficiency of the users through software’ external factors development. So that PEU and users’ attitude to be changed and moved in positive manner. PMID:24524089

  17. The advent of canine performance science: offering a sustainable future for working dogs.

    PubMed

    Cobb, Mia; Branson, Nick; McGreevy, Paul; Lill, Alan; Bennett, Pauleen

    2015-01-01

    Working and sporting dogs provide an essential contribution to many industries worldwide. The common development, maintenance and disposal of working and sporting dogs can be considered in the same way as other animal production systems. The process of 'production' involves genetic selection, puppy rearing, recruitment and assessment, training, housing and handling, handler education, health and working life end-point management. At present, inefficiencies throughout the production process result in a high failure rate of dogs attaining operational status. This level of wastage would be condemned in other animal production industries for economic reasons and has significant implications for dog welfare, as well as public perceptions of dog-based industries. Standards of acceptable animal use are changing and some historically common uses of animals are no longer publicly acceptable, especially where harm is caused for purposes deemed trivial, or where alternatives exist. Public scrutiny of animal use appears likely to increase and extend to all roles of animals, including working and sporting dogs. Production system processes therefore need to be transparent, traceable and ethically acceptable for animal use to be sustainable into the future. Evidence-based approaches already inform best practice in fields as diverse as agriculture and human athletic performance. This article introduces the nascent discipline of canine performance science, which aims to facilitate optimal product quality and production efficiency, while also assuring evidence-based increments in dog welfare through a process of research and development. Our thesis is that the model of canine performance science offers an objective, transparent and traceable opportunity for industry development in line with community expectations and underpins a sustainable future for working dogs. This article is part of a Special Issue entitled: Canine Behavior. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Opinion: Taking phytoremediation from proven technology to accepted practice.

    PubMed

    Gerhardt, Karen E; Gerwing, Perry D; Greenberg, Bruce M

    2017-03-01

    Phytoremediation is the use of plants to extract, immobilize, contain and/or degrade contaminants from soil, water or air. It can be an effective strategy for on site and/or in situ removal of various contaminants from soils, including petroleum hydrocarbons (PHC), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), solvents (e.g., trichloroethylene [TCE]), munitions waste (e.g., 2,4,6-trinitrotoluene [TNT]), metal(loid)s, salt (NaCl) and radioisotopes. Commercial phytoremediation technologies appear to be underutilized globally. The primary objective of this opinion piece is to discuss how to take phytoremediation from a proven technology to an accepted practice. An overview of phytoremediation of soil is provided, with the focus on field applications, to provide a frame of reference for the subsequent discussion on better utilization of phytoremediation. We consider reasons why phytoremediation is underutilized, despite clear evidence that, under many conditions, it can be applied quite successfully in the field. We offer suggestions on how to gain greater acceptance for phytoremediation by industry and government. A new paradigm of phytomanagement, with a specific focus on using phytoremediation as a "gentle remediation option" (GRO) within a broader, long-term management strategy, is also discussed. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  19. Certifying Industrial Energy Efficiency Performance: AligningManagement, Measurement, and Practice to Create Market Value

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McKane, Aimee; Scheihing, Paul; Williams, Robert

    2007-07-01

    More than fifteen years after the launch of programs in theU.K. and U.S., industry still offers one of the largest opportunities forenergy savings worldwide. The International Energy Agency (IEA) estimatesthe savings potential from cost-optimization of industrial motor-drivensystems alone at 7 percent of global electricity use. The U.S. Departmentof Energy (USDOE) Industrial Technologies Program estimates 7 percentsavings potential in total US industrial energy use through theapplication of proven best practice. Simple paybacks for these types ofprojects are frequently two years or less. The technology required toachieve these savings is widely available; the technical skills requiredto identify energy saving opportunities are knownmore » and transferable.Although programs like USDOE's Best Practices have been highlysuccessful, most plants, as supported by 2002 MECS data, remain eitherunaware or unmotivated to improve their energy efficiency--as evidencedby the 98 percent of US industrial facilities reporting to MECS say thatthey lack a full-time energy manager. With the renewed interest in energyefficiency worldwide and the emergence of carbon trading and newfinancial instruments such as white certificates1, there is a need tointroduce greater transparency into the way that industrial facilitiesidentify, develop, and document energy efficiency projects. Historically,industrial energy efficiency projects have been developed by plantengineers, frequently with assistance from consultants and/or supplierswith highly specialized technical skills. Under this scenario,implementation of energy efficiency improvements is dependent onindividuals. These individuals typically include "champions" within anindustrial facility or corporation, working in cooperation withconsultants or suppliers who have substantial knowledge based on years ofexperience. This approach is not easily understood by others without thisspecialized technical knowledge, penetrates the market fairly slowly, andhas no assurance of persistence, since champions may leave the company orbe reassigned after project completion.This paper presents an alternatescenario that builds on the body of expert knowledge concerning energymanagement best practices and the experience of industrial champions toengage industry in continuous energy efficiency improvement at thefacility rather than the individual level. Under this scenario,standardized methodologies for applying and validating energy managementbest practices in industrial facilities will be developed through aconsensus process involving both plant personnel and specializedconsultants and suppliers. The resulting protocols will describe aprocess or framework for conducting an energy savings assessment andverifying the results that will be transparent to policymakers, managers,and the financial community, and validated by a third-party organization.Additionally, a global dialogue is being initiated by the United NationsIndustrial Development Organization (UNIDO) concerning the development ofan international industrial energy management standard that would be ISOcompatible. The proposed scenario will combine the resulting standardwith the best practice protocols for specific energy systems (i.e.,steam, process heating, compressed air, pumping systems, etc.) to formthe foundation of a third party, performance-based certification programfor the overall industrial facility that is compatible with existingmanagement systems, including ISO 9001:2000, 14001:2004 and 6 Sigma. Thelong term goal of this voluntary, industry designed certification programis to develop a transparent, globally accepted system for validatingenergy efficiency projects and management practices. This system wouldcreate a verified record of energy savings with potential market valuethat could be recognized among sectors and countries.« less

  20. Deliberative public participation and hexachlorobenzene stockpiles.

    PubMed

    Carson, Lyn

    2009-04-01

    This paper is concerned with the quality of citizen involvement in relation to the governance of industrial risks. Specifically, it explores the hexachlorobenzene (HCB) case relative to best practice public participation, which is consistent with deliberative democratic theory. The case could be judged a public participation failure given that the community committee in combination with the corporate sponsor was unable to agree on a mutually acceptable technological pathway. This stalemate might have been attributable in part to the time spent on the task of review. A diligent participation working party could have created a much more effective public participation plan, grounded in the core values of professional public participation practice.

  1. Cloud manufacturing: from concept to practice

    NASA Astrophysics Data System (ADS)

    Ren, Lei; Zhang, Lin; Tao, Fei; Zhao, Chun; Chai, Xudong; Zhao, Xinpei

    2015-02-01

    The concept of cloud manufacturing is emerging as a new promising manufacturing paradigm, as well as a business model, which is reshaping the service-oriented, highly collaborative, knowledge-intensive and eco-efficient manufacturing industry. However, the basic concepts about cloud manufacturing are still in discussion. Both academia and industry will need to have a commonly accepted definition of cloud manufacturing, as well as further guidance and recommendations on how to develop and implement cloud manufacturing. In this paper, we review some of the research work and clarify some fundamental terminologies in this field. Further, we developed a cloud manufacturing systems which may serve as an application example. From a systematic and practical perspective, the key requirements of cloud manufacturing platforms are investigated, and then we propose a cloud manufacturing platform prototype, MfgCloud. Finally, a public cloud manufacturing system for small- and medium-sized enterprises (SME) is presented. This paper presents a new perspective for cloud manufacturing, as well as a cloud-to-ground solution. The integrated solution proposed in this paper, including the terminology, MfgCloud, and applications, can push forward this new paradigm from concept to practice.

  2. 76 FR 65735 - Draft Guidance for Industry: Implementation of Acceptable Abbreviated Donor History Questionnaire...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-24

    ...] Draft Guidance for Industry: Implementation of Acceptable Abbreviated Donor History Questionnaire and... Acceptable Abbreviated Donor History Questionnaire and Accompanying Materials for Use in Screening Frequent... abbreviated donor history questionnaire and accompanying materials (aDHQ documents), version 1.3 dated August...

  3. Implementation of Good Laboratory Practices (GLP) in basic scientific research: Translating the concept beyond regulatory compliance.

    PubMed

    Jena, G B; Chavan, Sapana

    2017-10-01

    The principles of Good Laboratory Practices (GLPs) are mainly intended for the laboratories performing studies for regulatory compliances. However, today GLP can be applied to broad disciplines of science to cater to the needs of the experimental objectives, generation of quality data and assay reproducibility. Considering its significance, it can now be applied in academics; industries as well as government set ups throughout the world. GLP is the best way to promote the reliability, reproducibility of the test data and hence facilitates the international acceptability. Now it is high time to translate and implement the concept of GLP beyond regulatory studies. Thus, it can pave the way for better understanding of scientific problems and help to maintain a good human and environmental health. Through this review, we have made an attempt to explore the uses of GLP principles in different fields of science and its acceptability as well as looking for its future perspectives. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. The vector of the tobacco epidemic: tobacco industry practices in low and middle-income countries.

    PubMed

    Lee, Sungkyu; Ling, Pamela M; Glantz, Stanton A

    2012-03-01

    To understand transnational tobacco companies' (TTCs) practices in low and middle-income countries which serve to block tobacco-control policies and promote tobacco use. Systematic review of published research on tobacco industry activities to promote tobacco use and oppose tobacco-control policies in low and middle-income countries. TTCs' strategies used in low and middle-income countries followed four main themes-economic activity; marketing/promotion; political activity; and deceptive/manipulative activity. Economic activity, including foreign investment and smuggling, was used to enter new markets. Political activities included lobbying, offering voluntary self-regulatory codes, and mounting corporate social responsibility campaigns. Deceptive activities included manipulation of science and use of third-party allies to oppose smoke-free policies, delay other tobacco-control policies, and maintain support of policymakers and the public for a pro-tobacco industry policy environment. TTCs used tactics for marketing, advertising, and promoting their brands that were tailored to specific market environments. These activities included direct and indirect tactis, targeting particular populations, and introducing new tobacco products designed to limit marketing restrictions and taxes, maintain the social acceptability of tobacco use, and counter tobacco-control efforts. TTCs have used similar strategies in high-income countries as these being described in low and middle-income countries. As required by FCTC Article 5.3, to counter tobacco industry pressures and to implement effective tobacco-control policies, governments and health professionals in low and middle-income countries should fully understand TTCs practices and counter them.

  5. Of conflicts, conspiracies, red herrings, and black swans.

    PubMed

    Wactawski-Wende, J; Anderson, G L

    2015-06-01

    The impact of the findings from the Women's Health Initiative trial of estrogen plus progestin cannot be attributed to any real or imagined conflicts of interest between government, researchers, and journals. Rather, the findings overturned decades of dogma in part promoted by the pharmaceutical industry, and the reaction to these unexpected findings was in direct proportion to their importance in reversing a misguided practice of prescribing the drug for chronic disease prevention. The findings have been widely accepted, as shown by the sustained subsequent reduction in prescriptions. However, conflicts of interest may influence a minority unwilling to accept the findings. The decrease in the use of a drug with an adverse risk profile for prevention of chronic disease is a public good.

  6. [Effects of a mandatory guideline that prohibit hospital doctors from accepting any form of benefits in any form from the pharmaceutical industry].

    PubMed

    Gundermann, C; Meier-Hellmann, A; Bauer, M; Hartmann, M

    2010-05-01

    Several hospitals have issued their own guidelines that regulate the conduct of staff members toward the pharmaceutical industry. The effect of theses guidelines on the attitude of the doctors toward the pharmaceutical industry in Germany has so far been unknown. This study investigated whether hospital doctors with guidelines and those without guidelines differ in their attitude toward the pharmaceutical industry. A retrospective analysis was undertaken to determine the influence of hospital guidelines on the attitude of doctors toward the pharmaceutical industry. In May 2008 all doctors in intensive care of a hospital with and one without guidelines were asked anonymously by a questionnaire about their dealings with the pharmaceutical industry. The response rate was 64.9 % (37/57) and 55.1 % (59/107) respectively. The cooperation rate in both groups was 100 %. In the hospital with guidelines every doctor was on average carrying 0.56 +/- 0.64 pharmaceutical advertising gifts with a company logo, while the average in the institution without guidelines was 1.2 +/- 0.61 advertising gifts (p = 0.026). Whereas 49 % of doctors with guidelines considered the acceptance of advertising gifts as not questionable, 81 % without guidelines did (p = 0.001; RRR = 0.65; 95 % CI = 0.48-0.91). Furthermore, 70 % of doctors in the institution with guidelines compared with 92 % of those doctors in the hospital without guidelines believed that the advertising practices of the pharmaceutical industry had no influence on their prescribing behaviour (p = 0.010; RRR = 3.6; 95 % CI = 1.36-9.52). Both groups of doctors are convinced that other doctors are more influenced by the pharmaceutical industry than they are themselves (51 % with and 37 % without guidelines, p = 0.207). 70 % and 90 %, respectively of all participants considered hospital guidelines setting standards of conduct toward the pharmaceutical industry and those not sponsored by industry to have a positive effect. Every other doctor additionally stated the advice by the pharmaceutical industry was not helpful for his work. Hospital guidelines on relations with the pharmaceutical industry appear to further a critical attitude by physicians regarding the pharmaceutical industry. Georg Thieme Verlag KG Stuttgart. New York.

  7. Managing health and safety risks: Implications for tailoring health and safety management system practices.

    PubMed

    Willmer, D R; Haas, E J

    2016-01-01

    As national and international health and safety management system (HSMS) standards are voluntarily accepted or regulated into practice, organizations are making an effort to modify and integrate strategic elements of a connected management system into their daily risk management practices. In high-risk industries such as mining, that effort takes on added importance. The mining industry has long recognized the importance of a more integrated approach to recognizing and responding to site-specific risks, encouraging the adoption of a risk-based management framework. Recently, the U.S. National Mining Association led the development of an industry-specific HSMS built on the strategic frameworks of ANSI: Z10, OHSAS 18001, The American Chemistry Council's Responsible Care, and ILO-OSH 2001. All of these standards provide strategic guidance and focus on how to incorporate a plan-do-check-act cycle into the identification, management and evaluation of worksite risks. This paper details an exploratory study into whether practices associated with executing a risk-based management framework are visible through the actions of an organization's site-level management of health and safety risks. The results of this study show ways that site-level leaders manage day-to-day risk at their operations that can be characterized according to practices associated with a risk-based management framework. Having tangible operational examples of day-to-day risk management can serve as a starting point for evaluating field-level risk assessment efforts and their alignment to overall company efforts at effective risk mitigation through a HSMS or other processes.

  8. Encouraging Learning of Industry Technology: A Merchandising Example

    ERIC Educational Resources Information Center

    Reilly, Andrew; Huss, Megan; Stoel, Leslie

    2005-01-01

    The application of the technology acceptance model to a merchandising course teaching industry software was evaluated. Based on technology acceptance research, industry software was presented emphasizing ease-of-use and usefulness. The final course project gave students a quasi real-life experience of combining merchandising skills with the…

  9. Best practices in incident investigation in the chemical process industries with examples from the industry sector and specifically from Nova Chemicals.

    PubMed

    Morrison, Lisa M

    2004-07-26

    This paper will summarize best practices in incident investigation in the chemical process industries and will provide examples from both the industry sector and specifically from NOVA Chemicals. As a sponsor of the Center for Chemical Process Safety (CCPS), an industry technology alliance of the American Institute of Chemical Engineers, NOVA Chemicals participates in a number of working groups to help develop best practices and tools for the chemical process and associated industries in order to advance chemical process safety. A recent project was to develop an update on guidelines for investigating chemical process incidents. A successful incident investigation management system must ensure that all incidents and near misses are reported, that root causes are identified, that recommendations from incident investigations identify appropriate preventive measures, and that these recommendations are resolved in a timely manner. The key elements of an effective management system for incident investigation will be described. Accepted definitions of such terms as near miss, incident, and root cause will be reviewed. An explanation of the types of incident classification systems in use, along with expected levels of follow-up, will be provided. There are several incident investigation methodologies in use today by members of the CCPS; most of these methodologies incorporate the use of several tools. These tools include: timelines, sequence diagrams, causal factor identification, brainstorming, checklists, pre-defined trees, and team-defined logic trees. Developing appropriate recommendations and then ensuring their resolution is the key to prevention of similar events from recurring, along with the sharing of lessons learned from incidents. There are several sources of information on previous incidents and lessons learned available to companies. In addition, many companies in the chemical process industries use their own internal databases to track recommendations from incidents and to share learnings internally.

  10. Changing competition in health care marketing: a method for analysis and strategic planning.

    PubMed

    Ellis, B; Brockman, B K

    1993-01-01

    As the cost and importance of healthcare continue to increase, competition in the medical industry is taking new forms and becoming more intense. The driving trends behind this competition are analyzed in the framework of Porter's Five Forces of Competition Model. The authors then discuss how the widely accepted strategies of cost, differentiation, focus, and domestication can be utilized to counter the implications of these trends and how to capitalize on opportunities in medical practice in the 1990's.

  11. Gaston Planté and his invention of the lead-acid battery-The genesis of the first practical rechargeable battery

    NASA Astrophysics Data System (ADS)

    Kurzweil, P.

    In 1860, the Frenchman Gaston Planté (1834-1889) invented the first practical version of a rechargeable battery based on lead-acid chemistry-the most successful secondary battery of all ages. This article outlines Planté's fundamental concepts that were decisive for later development of practical lead-acid batteries. The 'pile secondaire' was indeed ahead its time in that an appropriate appliance for charging the accumulator was not available. The industrial success came after the invention of the Gramme machine. In 1879, Planté obtained acceptance for his work by publishing a book entitled Recherches sur l' Electricité. He never protected his inventions by patents, and spent much of his fortune on assisting impoverished scientists.

  12. Energy conservation in two wheeler head tube welding fixture by modeling

    NASA Astrophysics Data System (ADS)

    Kamalanathan, S.; Guruprasad, B.; Elango, A.

    2018-05-01

    Energy conservation in automotive industry plays a significant role to increase the productivity which reduces the Men, Material, and Machinery. The Automotive industry sector is one of the major sector which works in two or more times of loading of work pieces in welding fixture. It consumes more energy. This project focuses on reduce the energy consumption by applying single time loading of work pieces with minimum number of labours, machine and reduces scrap. Welding fixtures are designed for the components which are difficult to weld in normal way or without any holding unit. The fixture is to be designed for the two wheeler head tube assembly which is to be welded with its companion for its application. It is demonstrated by modelling in Uni-graphics Software and FEA analysis will be done by ANSYS and experimentally products are tested and execute in industry. A code of practice suggested establishing acceptable standard for energy used in Automotive industry.

  13. Potentials for win-win alliances among animal agriculture and forest products industries: application of the principles of industrial ecology and sustainable development.

    PubMed

    Cowling, Ellis B; Furiness, Carl S

    2005-12-01

    Commercial forests in many parts of the world are deficient in nitrogen and phosphorus. These nutrient-deficient forests often exist in close proximity to large animal feeding operations, meat processing and other food, textile, or other biomass-processing plants, and municipal waste treatment facilities. Many of these facilities produce large surpluses of nitrogen, phosphorus, and organic matter as gaseous ammonia, urea, uric acid, phosphorus compounds, bacterial sludges, and partially treated municipal wastewaters. These co-existing and substantial nutrient deficiencies and surpluses offer ready-made opportunities for discovery, demonstration, and commercial development of science-based, technology-facilitated, environmentally sound, economically viable, and socially acceptable "win-win alliances" among these major industries based on the principles of industrial ecology and sustainable development. The major challenge is to discover practical means to capture the surplus nutrients and put them to work in forest stands from which value-added products can be produced and sold at a profit.

  14. Emergence of the nuclear industry and associated crime. Master's thesis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vaught, J.W.

    Nuclear energy, in weapons production and electrical power generation, is a technology that has endured public scrutiny since the late 1940s. Societal acceptance of this industry has been affected by controversy in the following areas: health effects of exposure to radiation, possible consequences resulting from accidents, and nuclear nonproliferation. The literature review begins in Chapter 2 by examining the changing public perceptions of nuclear energy over the last forty years. Support for the ideals and practices of the industry has often wavered, due to media representation of incidents, accidents, and potential catastrophic events. The second part of the chapter highlightsmore » the crimes associated with nuclear energy in a chronological order of concern by nuclear industry security specialists. Research has found certain types of crime to be more prevalent during particular eras than others. Crimes instigated by spies, peace activists, terrorists, and the insider (employee) are reviewed, with an emphasis on insider crime.« less

  15. Of Fur, Feather, and Fin: Human's Use and Concern for Non-Human Species.

    PubMed

    Byrd, Elizabeth; Widmar, Nicole Olynk; Fulton, Joan

    2017-03-09

    The public's concern for animal welfare is evolving and it is important to consider factors that are related to concern for animals and their use by humans. An online survey of 825 U.S. residents was conducted. Relationships between approval of animal uses and stated concern for animal welfare were examined. More than 90% of respondents reported that using animals for egg production, service or therapy, pets, and milk production was acceptable to them. Respondents who were younger or reported being female less frequently found most uses acceptable than older or male respondents. Half of respondents reported concern for the welfare of bison while 40% or more stated concern for the welfare of elk, beef cattle, and dairy cattle. Respondents who stated they were concerned for the welfare of dairy cattle less frequently reported accepting using animals for meat production, livestock shows, and hunting. Thus, self-reported concern for animal species and acceptance of the use of animals were related in some instances. A better understanding of the factors related to acceptance of animal uses and concern for animal welfare will help animal-related industries and wildlife agencies develop practices that are consistent with public attitudes.

  16. Standardization of quantum key distribution and the ETSI standardization initiative ISG-QKD

    NASA Astrophysics Data System (ADS)

    Länger, Thomas; Lenhart, Gaby

    2009-05-01

    In recent years, quantum key distribution (QKD) has been the object of intensive research activities and of rapid progress, and it is now developing into a competitive industry with commercial products. Once QKD systems are transferred from the controlled environment of physical laboratories into a real-world environment for practical use, a number of practical security, compatibility and connectivity issues need to be resolved. In particular, comprehensive security evaluation and watertight security proofs need to be addressed to increase trust in QKD. System interoperability with existing infrastructures and applications as well as conformance with specific user requirements have to be assured. Finding common solutions to these problems involving all actors can provide an advantage for the commercialization of QKD as well as for further technological development. The ETSI industry specification group for QKD (ISG-QKD) offers a forum for creating such universally accepted standards and will promote significant leverage effects on coordination, cooperation and convergence in research, technical development and business application of QKD.

  17. Micro modules for mobile shape, color and spectral imaging with smartpads in industry, biology and medicine

    NASA Astrophysics Data System (ADS)

    Hofmann, Dietrich; Dittrich, Paul-Gerald; Düntsch, Eric; Kraus, Daniel

    2014-02-01

    Aim of the paper is the demonstration of a paradigm shift in shape, color and spectral measurements in industry, biology and medicine as well as in measurement education and training. Innovative hardware apps (hwapps) and software apps (swapps) with smartpads are fundamental enablers for the transformation from conventional stationary working places towards innovative mobile working places with in-field measurements and point-of-care (POC) diagnostics. Mobile open online courses (MOOCs) are transforming the study habits. Practical examples for the application of innovative photonic micro shapemeters, colormeters and spectrometers will be given. The innovative approach opens so far untapped enormous markets for measurement science, engineering and training. These innovative working conditions will be fast accepted due to their convenience, reliability and affordability. A highly visible advantage of smartpads is the huge number of their distribution, their worldwide connectivity via Internet and cloud services, the standardized interfaces like USB and HDMI and the experienced capabilities of their users for practical operations, learned with their private smartpads.

  18. Attention to 'details': etiquette and the pharmaceutical salesman in postwar American.

    PubMed

    Greene, Jeremy A

    2004-04-01

    This paper provides a sketch of the emerging role of the pharmaceutical salesman, or 'detail man', in the growth years of the American post-World War II pharmaceutical industry. Using training manuals, trade literature, in-house company newsletters, memoirs, and a variety of other published sources, the paper follows the delicate tactics employed by salesmen and their managers in their attempts to recast drug salesmanship as a 'professional service' fulfilling vital functions within medical education. As they worked to legitimate their presence in the nation's hospitals and clinics, particular emphasis was given to precise management of the etiquette of doctor-salesman interaction. Ultimately, the techniques employed by mid-century salesmen and their managers were to prove successful in generating a widespread acceptance of the industry representative within the clinical spaces of hospital and clinic. Indeed, many of the practices of market research and market strategy employed across the pharmaceutical industry today have their origins in the practices of the individual detail man. Exploration of the postwar pharmaceutical salesman as an overlooked historical 'type' provides significant insights into the intersection of medicine and the consumer marketplace during the later 20th century.

  19. Researchers' views of the acceptability of restrictive provisions in clinical trial agreements with industry sponsors.

    PubMed

    Mello, Michelle M; Clarridge, Brian R; Studdert, David M

    2005-01-01

    We conducted a mail survey of 884 U.S. medical school faculty active in clinical research to elicit their views about the acceptability of provisions in contracts for industry-sponsored clinical trials that would restrict investigators' academic freedom and control over trials. We compared their responses to results from a similar survey of research administrators at 107 medical schools. There was substantial variation among clinical researchers in their acceptability judgments, with a relatively large proportion of clinical trial investigators willing to accept provisions that give industry sponsors considerable control over the dissemination of research results. There were significant differences in the perceptions of clinical trial investigators versus other recently published clinical researchers; investigators with a high versus low percentage of research support from industry; junior versus senior faculty; and investigators at institutions with high versus low National Institute of Health (NIH) funding ranks. There was also a significant divergence of views in a number of areas between clinical trialists and research administrators who negotiate clinical trial contracts on their behalf. Medical school faculty could benefit from additional guidance about what their institution views as acceptable parameters for industry-sponsored clinical trial agreements.

  20. An assessment of space shuttle flight software development processes

    NASA Technical Reports Server (NTRS)

    1993-01-01

    In early 1991, the National Aeronautics and Space Administration's (NASA's) Office of Space Flight commissioned the Aeronautics and Space Engineering Board (ASEB) of the National Research Council (NRC) to investigate the adequacy of the current process by which NASA develops and verifies changes and updates to the Space Shuttle flight software. The Committee for Review of Oversight Mechanisms for Space Shuttle Flight Software Processes was convened in Jan. 1992 to accomplish the following tasks: (1) review the entire flight software development process from the initial requirements definition phase to final implementation, including object code build and final machine loading; (2) review and critique NASA's independent verification and validation process and mechanisms, including NASA's established software development and testing standards; (3) determine the acceptability and adequacy of the complete flight software development process, including the embedded validation and verification processes through comparison with (1) generally accepted industry practices, and (2) generally accepted Department of Defense and/or other government practices (comparing NASA's program with organizations and projects having similar volumes of software development, software maturity, complexity, criticality, lines of code, and national standards); (4) consider whether independent verification and validation should continue. An overview of the study, independent verification and validation of critical software, and the Space Shuttle flight software development process are addressed. Findings and recommendations are presented.

  1. Wafer bonding process for building MEMS devices

    NASA Astrophysics Data System (ADS)

    Pabo, Eric F.; Meiler, Josef; Matthias, Thorsten

    2014-06-01

    The technology for the measurement of colour rendering and colour quality is not new, but many parameters related to this issue are currently changing. A number of standard methods were developed and are used by different specialty areas of the lighting industry. CIE 13.3 has been the accepted standard implemented by many users and used for many years. Light-emitting Diode (LED) technology moves at a rapid pace and, as this lighting source finds wider acceptance, it appears that traditional colour-rendering measurement methods produce inconsistent results. Practical application of various types of LEDs yielded results that challenged conventional thinking regarding colour measurement of light sources. Recent studies have shown that the anatomy and physiology of the human eye is more complex than formerly accepted. Therefore, the development of updated measurement methodology also forces a fresh look at functioning and colour perception of the human eye, especially with regard to LEDs. This paper includes a short description of the history and need for the measurement of colour rendering. Some of the traditional measurement methods are presented and inadequacies are discussed. The latest discoveries regarding the functioning of the human eye and the perception of colour, especially when LEDs are used as light sources, are discussed. The unique properties of LEDs when used in practical applications such as luminaires are highlighted.

  2. The Challenges and Issues Regarding E-Health and Health Information Technology Trends in the Healthcare Sector

    NASA Astrophysics Data System (ADS)

    Esmaeilzadeh, Pouyan; Sambasivan, Murali; Kumar, Naresh

    Like other industries, the utilization of the internet and Information Technology (IT) has increased in the health sector. Different applications attributed to the internet and IT in healthcare practice. It includes a range of services that intersect the edge of medicine, computer and information science. The presence of the internet helps healthcare practice with the use of electronic processes and communication. Also, health IT (HIT) deals with the devices, clinical guidelines and methods required to improve the management of information in healthcare. Although the internet and HIT has been considered as an influential means to enhance health care delivery, it is completely naive to imagine all new tools and mechanisms supported by the internet and HIT systems are simply adopted and used by all organizational members. As healthcare professionals play an important role in the healthcare sector, there is no doubt that mechanism of newly introduced HIT and new application of the internet in medical practice should be coupled with healthcare professionals' acceptance. Therefore, with great resistance by healthcare professionals new mechanism and tools supported by IT and the internet cannot be used properly and subsequently may not improve the quality of medical care services. However, factors affecting the healthcare professionals' adoption behavior concerning new e-health and HIT mechanism are still not conclusively identified. This research (as a theoretical study) tries to propose the source of resistance in order to handle the challenges over new e-technology in the health industry. This study uses the involved concepts and develops a conceptual framework to improve overall acceptance of e-health and HIT by healthcare professionals.

  3. The vector of the tobacco epidemic: tobacco industry practices in low and middle-income countries

    PubMed Central

    Lee, Sungkyu; Ling, Pamela M.; Glantz, Stanton A.

    2012-01-01

    Purpose To understand transnational tobacco companiesr’ (TTCs) practices in low and middle-income countries which serve to block tobacco-control policies and promote tobacco use. Methods Systematic review of published research on tobacco industry activities to promote tobacco use and oppose tobacco-control policies in low and middle-income countries. Results TTCs’ strategies used in low and middle-income countries followed four main themes—economic activity; marketing/promotion; political activity; and deceptive/manipulative activity. Economic activity, including foreign investment and smuggling, was used to enter new markets. Political activities included lobbying, offering voluntary self-regulatory codes, and mounting corporate social responsibility campaigns. Deceptive activities included manipulation of science and use of third-party allies to oppose smoke-free policies, delay other tobacco-control policies, and maintain support of policymakers and the public for a pro-tobacco industry policy environment. TTCs used tactics for marketing, advertising, and promoting their brands that were tailored to specific market environments. These activities included direct and indirect tactis, targeting particular populations, and introducing new tobacco products designed to limit marketing restrictions and taxes, maintain the social acceptability of tobacco use, and counter tobacco-control efforts. Conclusions TTCs have used similar strategies in high-income countries as these being described in low and middle-income countries. As required by FCTC Article 5.3, to counter tobacco industry pressures and to implement effective tobacco-control policies, governments and health professionals in low and middle-income countries should fully understand TTCs practices and counter them. PMID:22370696

  4. PFEM-based modeling of industrial granular flows

    NASA Astrophysics Data System (ADS)

    Cante, J.; Dávalos, C.; Hernández, J. A.; Oliver, J.; Jonsén, P.; Gustafsson, G.; Häggblad, H.-Å.

    2014-05-01

    The potential of numerical methods for the solution and optimization of industrial granular flows problems is widely accepted by the industries of this field, the challenge being to promote effectively their industrial practice. In this paper, we attempt to make an exploratory step in this regard by using a numerical model based on continuous mechanics and on the so-called Particle Finite Element Method (PFEM). This goal is achieved by focusing two specific industrial applications in mining industry and pellet manufacturing: silo discharge and calculation of power draw in tumbling mills. Both examples are representative of variations on the granular material mechanical response—varying from a stagnant configuration to a flow condition. The silo discharge is validated using the experimental data, collected on a full-scale flat bottomed cylindrical silo. The simulation is conducted with the aim of characterizing and understanding the correlation between flow patterns and pressures for concentric discharges. In the second example, the potential of PFEM as a numerical tool to track the positions of the particles inside the drum is analyzed. Pressures and wall pressures distribution are also studied. The power draw is also computed and validated against experiments in which the power is plotted in terms of the rotational speed of the drum.

  5. Det Norske Veritas rule philosophy with regard to gas turbines for marine propulsion

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Martin, P.

    1999-04-01

    This paper is mainly based on Det Norske Veritas (DNV) Rules of January 1996, Part 4, Chapter 2, Section 4 -- Gas Turbines, and is intended to at least open the dialogue between the gas turbine industry and DNV. There is a need for design approval and manufacturing inspection process systematic and testing procedures to match the standards of the industry. The role and expectations imposed by owners, the authorities, insurance agencies, etc. needs to be understood. These expectations often have technical implications that may go against the normal procedures and practices of the gas turbine industry, and could havemore » cost impacts. The question of DNV acceptance criteria has been asked many times, with respect to gas turbines. DNV relies a great deal on the manufacturer to provide the basis for the design criteria, manufacturing, and testing criteria of the gas turbine. However, DNV adds its knowledge and experience to this, and checks that the documentation presented by the manufacturer is technically acceptable. Generally, a high level of the state-of-the-art theoretical documentation is required to support the design of modern gas turbines. A proper understanding of the rule philosophy of DNV could prove to be useful in developing better gas turbines systems, which fulfill the rule requirements, and at the same time save resources such as money and time. It is important for gas turbine manufacturers to understand the intent of the rules since it is the intent that needs to be fulfilled. Further, the rules do have the principle of equivalence, which means that there is full freedom in how one fulfills the intent of the rules, as long as DNV accepts the solution.« less

  6. Impacts of glutathione Maillard reaction products on sensory characteristics and consumer acceptability of beef soup.

    PubMed

    Hong, J H; Jung, D W; Kim, Y S; Lee, S M; Kim, K O

    2010-10-01

    The sensory characteristics and consumer acceptability of beef soup with added glutathione Maillard reaction products (GMRPs) were investigated to examine the effects of the GMRPs on beef-soup flavor compared to soups made with glutathione (GSH) and monosodium glutamate (MSG), a control (CON), or a control soup made with 150% beef content (CON150). The sensory characteristics of the beef soups were examined by descriptive analysis. The overall acceptabilities of the beef soups were rated by consumers. Principal component analysis was performed on descriptive data as explanatory variables with overall acceptability as a supplementary variable to observe the relationships between the descriptive data and consumer acceptability, as well as the relationships between the beef-soup samples and their sensory attributes. The samples containing GMRPs had "beef flavor" that was stronger than the CON and MSG samples, and comparable to that of the GSH sample and CON150. The GMRP samples had stronger "green onion flavor,"garlic flavor," and "boiled egg white flavor" than the other samples. The beef soup containing MSG was preferred to CON, CON150, and GSH. The samples with GMRPs were least favored because of their pronounced metallic and astringent notes. The results of this study imply the feasibility of GMRPs as a flavor enhancer since the soups containing these compounds showed more complex flavor profiles than GSH. However, future studies are required to optimize the MR conditions that produce GMRPs without undesirable characteristics. Practical Application: This study examined the practicability of the Maillard reaction products between glutathione (GSH) and glucose (GP) or fructose (FP) as a flavor enhancer by investigating the sensory characteristics and consumer acceptability evoked by them in a beef-soup system. This study helps flavor and food industry to develop a new flavor enhancer by providing practical information, such as beef flavor-enhancing effect of FP and GP compared to that by increasing beef content or adding GSH or MSG. In addition, it is expected that the outcome of this study, such as sensory attributes of and consumer responses to GSH Maillard reaction products, compliments previous studies that mostly focused on chemical analysis of Maillard reaction.

  7. A quiz on "the ethics of accepting gifts from industry".

    PubMed

    Holm, Richard P

    2007-03-01

    (1) Cash payments should not be accepted from any health-related industry, which might create a conflict of interest, unless it is payment for legitimate research purposes, and the cash is not for purposes of marketing. (2) Marketing gifts, which benefit the patient, are acceptable as long as they are not of substantial value...like equal or less than $100. (3) Conferences (including a "mo dest" meal) sponsored by industry are acceptable when they serve a genuine educational function, and promote objective and scientific activity. (4) Professional people should understand and appreciate the marketing forces, which are endeavoring to influence our behavior. To interact with marketing people is appropriate, not unethical. However we must not be influenced in any way that would disadvantage our patients.

  8. Summary of: dental practitioners and a digital future: an initial exploration of barriers and incentives to adopting digital technologies.

    PubMed

    Addy, Liam

    2013-12-01

    Digital technologies are proliferating into dental practices. While their technical attributes have often been studied, it remains unclear why some dentists adopt and use these technologies more than others. AIM To explore the incentives for and barriers against accepting and using digital dental technologies. Eleven semi-structured qualitative interviews were conducted with experts in dentistry, dental technology and dental education in the Netherlands. Dentists' acceptance and use of digital technologies are to varying degrees driven by the perceived advantages over analogue methods, perceived influence on treatment quality, dentists' personal and professional orientation, and social influence from peers and external groups. These effects are complemented by personal and dental-practice characteristics. The findings suggest that there are large differences in motivation to adopt and use digital technologies between early adopters, late adopters and non-adopters, which should be examined in greater detail. We recommend that educators, dentists, and representatives of the dental industry who deal with the diffusion of these technologies take account of dentists' widely different attitudes to digitalisation.

  9. Tobacco industry consumer research on socially acceptable cigarettes.

    PubMed

    Ling, P M; Glantz, S A

    2005-10-01

    To describe tobacco industry consumer research to inform the development of more "socially acceptable" cigarette products since the 1970s. Analysis of previously secret tobacco industry documents. 28 projects to develop more socially acceptable cigarettes were identified from Philip Morris, RJ Reynolds, British American Tobacco, and Lorillard tobacco companies. Consumer research and concept testing consistently demonstrated that many smokers feel strong social pressure not to smoke, and this pressure increased with exposure to smoking restrictions. Tobacco companies attempted to develop more socially acceptable cigarettes with less visible sidestream smoke or less odour. When presented in theory, these product concepts were very attractive to important segments of the smoking population. However, almost every product developed was unacceptable in actual product tests or test markets. Smokers reported the complete elimination of secondhand smoke was necessary to satisfy non-smokers. Smokers have also been generally unwilling to sacrifice their own smoking satisfaction for the benefit of others. Many smokers prefer smoke-free environments to cigarettes that produce less secondhand smoke. Concerns about secondhand smoke and clean indoor air policies have a powerful effect on the social acceptability of smoking. Historically, the tobacco industry has been unable to counter these effects by developing more socially acceptable cigarettes. These data suggest that educating smokers about the health dangers of secondhand smoke and promoting clean indoor air policies has been difficult for the tobacco industry to counter with new products, and that every effort should be made to pursue these strategies.

  10. Tobacco industry consumer research on socially acceptable cigarettes

    PubMed Central

    Ling, P; Glantz, S

    2005-01-01

    Objective: To describe tobacco industry consumer research to inform the development of more "socially acceptable" cigarette products since the 1970s. Methods: Analysis of previously secret tobacco industry documents. Results: 28 projects to develop more socially acceptable cigarettes were identified from Philip Morris, RJ Reynolds, British American Tobacco, and Lorillard tobacco companies. Consumer research and concept testing consistently demonstrated that many smokers feel strong social pressure not to smoke, and this pressure increased with exposure to smoking restrictions. Tobacco companies attempted to develop more socially acceptable cigarettes with less visible sidestream smoke or less odour. When presented in theory, these product concepts were very attractive to important segments of the smoking population. However, almost every product developed was unacceptable in actual product tests or test markets. Smokers reported the complete elimination of secondhand smoke was necessary to satisfy non-smokers. Smokers have also been generally unwilling to sacrifice their own smoking satisfaction for the benefit of others. Many smokers prefer smoke-free environments to cigarettes that produce less secondhand smoke. Conclusions: Concerns about secondhand smoke and clean indoor air policies have a powerful effect on the social acceptability of smoking. Historically, the tobacco industry has been unable to counter these effects by developing more socially acceptable cigarettes. These data suggest that educating smokers about the health dangers of secondhand smoke and promoting clean indoor air policies has been difficult for the tobacco industry to counter with new products, and that every effort should be made to pursue these strategies. PMID:16183968

  11. Pipeline Optimization Program (PLOP)

    DTIC Science & Technology

    2006-08-01

    the framework of the Dredging Operations Decision Support System (DODSS, https://dodss.wes.army.mil/wiki/0). PLOP compiles industry standards and...efficiency point ( BEP ). In the interest of acceptable wear rate on the pump, industrial standards dictate that the flow Figure 2. Pump class as a function of...percentage of the flow rate corresponding to the BEP . Pump Acceptability Rules. The facts for pump performance, industrial standards and pipeline and

  12. Finance issue brief: comprehensive consumer rights bills: year end report-2002.

    PubMed

    Morgan, Rachel; MacEachern, Lillian

    2002-12-31

    The health care industry has historically used established formats for patient rights in order to maintain the integrity and quality of care in all settings of care provision. By establishing rights and responsibilities for patients, it increased patient involvement and created boundaries for acceptable practice for health care providers. As the provision of health care is evolving and including the health payor as never before, legislators are faced with the task of bridging the gap for consumers by creating protective measures that are referred to as a "Patient's Bill of Rights".

  13. Finance issue brief: comprehensive consumer rights bill: year end report-2003.

    PubMed

    MacEachern, Lillian

    2003-12-31

    The health care industry has historically used established formats for patient rights in order to maintain the integrity and quality of care in all settings of care provision. By establishing rights and responsibilities for patients, it increased patient involvement and created boundaries for acceptable practice for health care providers. As the provision of health care is evolving and including the health payor as never before, legislators are faced with the task of bridging the gap for consumers by creating protective measures that are referred to as a "Patient's Bill of Rights".

  14. Management methodology for pressure equipment

    NASA Astrophysics Data System (ADS)

    Bletchly, P. J.

    Pressure equipment constitutes a significant investment in capital and a major proportion of potential high-risk plant in many operations and this is particularly so in an alumina refinery. In many jurisdictions pressure equipment is also subject to statutory regulation that imposes obligations on Owners of the equipment with respect to workplace safety. Most modern technical standards and industry codes of practice employ a risk-based approach to support better decision making with respect to pressure equipment. For a management system to be effective it must demonstrate that risk is being managed within acceptable limits.

  15. Chapter 1: Introduction. The Uniform Methods Project: Methods for Determining Energy-Efficiency Savings for Specific Measures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Li, Michael; Haeri, Hossein; Reynolds, Arlis

    This chapter provides a set of model protocols for determining energy and demand savings that result from specific energy efficiency measures implemented through state and utility efficiency programs. The methods described here are approaches that are or are among the most commonly used and accepted in the energy efficiency industry for certain measures or programs. As such, they draw from the existing body of research and best practices for energy efficiency program evaluation, measurement, and verification (EM&V). These protocols were developed as part of the Uniform Methods Project (UMP), funded by the U.S. Department of Energy (DOE). The principal objectivemore » for the project was to establish easy-to-follow protocols based on commonly accepted methods for a core set of widely deployed energy efficiency measures.« less

  16. The plant breeding industry after pure line theory: Lessons from the National Institute of Agricultural Botany.

    PubMed

    Berry, Dominic

    2014-06-01

    In the early twentieth century, Wilhelm Johannsen proposed his pure line theory and the genotype/phenotype distinction, work that is prized as one of the most important founding contributions to genetics and Mendelian plant breeding. Most historians have already concluded that pure line theory did not change breeding practices directly. Instead, breeding became more orderly as a consequence of pure line theory, which structured breeding programmes and eliminated external heritable influences. This incremental change then explains how and why the large multi-national seed companies that we know today were created; pure lines invited standardisation and economies of scale that the latter were designed to exploit. Rather than focus on breeding practice, this paper examines the plant varietal market itself. It focusses upon work conducted by the National Institute of Agricultural Botany (NIAB) during the interwar years, and in doing so demonstrates that, on the contrary, the pure line was actually only partially accepted by the industry. Moreover, claims that contradicted the logic of the pure line were not merely tolerated by the agricultural geneticists affiliated with NIAB, but were acknowledged and legitimised by them. The history of how and why the plant breeding industry was transformed remains to be written. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. A transparent look at the measurement and application of colour rendering in the use of LED light sources

    NASA Astrophysics Data System (ADS)

    Leuschner, F. W.; Van Der Westhuyzen, J. G. J.

    2014-06-01

    The technology for the measurement of colour rendering and colour quality is not new, but many parameters related to this issue are currently changing. A number of standard methods were developed and are used by different specialty areas of the lighting industry. CIE 13.3 has been the accepted standard implemented by many users and used for many years. Light-emitting Diode (LED) technology moves at a rapid pace and, as this lighting source finds wider acceptance, it appears that traditional colour-rendering measurement methods produce inconsistent results. Practical application of various types of LEDs yielded results that challenged conventional thinking regarding colour measurement of light sources. Recent studies have shown that the anatomy and physiology of the human eye is more complex than formerly accepted. Therefore, the development of updated measurement methodology also forces a fresh look at functioning and colour perception of the human eye, especially with regard to LEDs. This paper includes a short description of the history and need for the measurement of colour rendering. Some of the traditional measurement methods are presented and inadequacies are discussed. The latest discoveries regarding the functioning of the human eye and the perception of colour, especially when LEDs are used as light sources, are discussed. The unique properties of LEDs when used in practical applications such as luminaires are highlighted.

  18. 78 FR 26785 - Guidance for Industry: Implementation of an Acceptable Abbreviated Donor History Questionnaire...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-08

    ...] Guidance for Industry: Implementation of an Acceptable Abbreviated Donor History Questionnaire and... Abbreviated Donor History Questionnaire and Accompanying Materials for Use in Screening Frequent Donors of... history questionnaire and accompanying materials (aDHQ documents), version 1.3 dated December 2012...

  19. Cognitive ergonomics: the use of mind mapping tool in maintaining productive sector of a Brazilian paper company.

    PubMed

    Mattos, Diego; Mateus, José Roberto; Merino, Eugenio

    2012-01-01

    The use of mind maps as a method of building knowledge, planning, organizing activities and ideas can be seen in the literature related to ergonomics. The results of such use are relevant and its use in academic area found. However, regarding to its use in industrial environments, studies can't not be found. With this scenario, and based on the perception of the ergonomist about the importance of using methods such as mind maps in support of human cognition, it seems pertinent to its use in industry sectors whose cognitive demand requires. Given these assumptions, this study aimed to apply the method of Mind Maps in Productive Maintenance sector of a Brazilian paper. The Productive Maintenance sector in the Paper Industry has an important contribution to operational performance. With practical Predictive Maintenance, Preventive Maintenance and Corrective Maintenance, the industry advocates to make the machines to produce paper is not to stop producing when they are programmed to do so. Among the practices cited, the Preventive Maintenance is one that leads to pre-determined intervals in order to reduce the possibility of placing the equipment in a condition below the required level of acceptance. Therefore, this article aims to propose using the tool "mental maps" in order to collaborate in planning and implementation of preventive maintenance activities in the sector of mechanical maintenance of a pulp and paper industry in southern Brazil. The study investigated the maintenance sector through its employees, who went through training about the tool and then use it and ergonomists company.

  20. Psychiatrists' relationships with industry: the principal-agent problem.

    PubMed

    Appelbaum, Paul S; Gold, Azgad

    2010-01-01

    Psychiatrists' relationships with the pharmaceutical and device industries have been a growing focus of attention, with questions raised about the impact of those relationships on prescribing practices, diagnostic criteria, practice guidelines, continuing education, conduct and reporting of research, and patients' and public trust. Indeed, these concerns exist for the medical profession as a whole, with various remedial measures proposed. We suggest that such relationships can be understood as giving rise to a "principal-agent problem," which occurs when an agent (here, a physician) is engaged to advance the interests of another party, the principal (typically a patient), but also faces incentives to promote other interests. Studies suggest that at least some relationships--which include attending industry-sponsored presentations, meeting with marketing representatives, and accepting samples--can alter psychiatrists' and other physicians' behavior in ways that can compromise patients' interests, and that industry-funded research may create bias in the medical literature. These effects are difficult to detect in specific cases, however, because of asymmetries of information and may not be apparent even to physicians themselves. Principal-agent analysis suggests that the possible responses to such problems, including appeals to ethical principles, monitoring behavior, and managing risk-inducing situations, should include consideration of aligning agents' incentives with principals' interests. This type of analysis underscores the similarity of the issues raised by physicians' relationships with industry to problems that arise more generally in society, thus reducing physicians' potential affective responses to these issues and efforts to address them. Finally, such analysis directs attention to the benefits and costs of each alternative, thereby encouraging reliance on evidence as a basis for policy.

  1. Thyme oil vapour and modified atmosphere packaging reduce anthracnose incidence and maintain fruit quality in avocado.

    PubMed

    Sellamuthu, Periyar Selvam; Mafune, Mpho; Sivakumar, Dharini; Soundy, Puffy

    2013-09-01

    Postharvest application of prochloraz fungicide is commercially practiced to control anthracnose, a postharvest disease in avocado. Increasing consumer concern regarding food safety and demand for organically produced fruits make it necessary to search for natural environmentally friendly alternative products and processes for the fruit industry. A combination of modified atmosphere packaging (MAP; ∼8% CO₂, 2% O₂) plus thyme oil (TO) was evaluated on the incidence and severity of anthracnose, physiological disorders (grey pulp, vascular browning), fruit quality parameters (L*, h°, firmness, weight loss) and sensory parameters (taste, texture, flavour and overall acceptance), phenylalanine ammonia-lyase (PAL) enzyme activity, total phenolic compounds, flavonoid contents and antioxidant activity in avocados ('Fuerte' and 'Hass' cultivars) held at 10 °C cold storage for 18 days and thereafter, ripened at 25 °C for 5-10 days. Stand-alone MAP, commercial treatment (prochloraz 0.05%) and untreated (control) fruit were included for comparison. MAP + TO treatment significantly (P < 0.05) reduced the incidence and severity of anthracnose, grey pulp, vascular browning, weight loss and loss of fruit firmness, and showed acceptable taste, flavour, texture and higher overall acceptance, increased PAL activity, total phenolic compounds, flavonoid contents and antioxidant activity, after ripening at 25 °C followed by cold storage at 10 °C. This investigation recommends MAP + TO combination treatment as a suitable alternative to the currently adopted prochloraz application. © 2013 Society of Chemical Industry.

  2. A pilot survey of the U.S. medical waste industry to determine training needs for safely handling highly infectious waste.

    PubMed

    Le, Aurora B; Hoboy, Selin; Germain, Anne; Miller, Hal; Thompson, Richard; Herstein, Jocelyn J; Jelden, Katelyn C; Beam, Elizabeth L; Gibbs, Shawn G; Lowe, John J

    2018-02-01

    The recent Ebola outbreak led to the development of Ebola virus disease (EVD) best practices in clinical settings. However, after the care of EVD patients, proper medical waste management and disposal was identified as a crucial component to containing the virus. Category A waste-contaminated with EVD and other highly infectious pathogens-is strictly regulated by governmental agencies, and led to only several facilities willing to accept the waste. A pilot survey was administered to determine if U.S. medical waste facilities are prepared to handle or transport category A waste, and to determine waste workers' current extent of training to handle highly infectious waste. Sixty-eight percent of survey respondents indicated they had not determined if their facility would accept category A waste. Of those that had acquired a special permit, 67% had yet to modify their permit since the EVD outbreak. This pilot survey underscores gaps in the medical waste industry to handle and respond to category A waste. Furthermore, this study affirms reports a limited number of processing facilities are capable or willing to accept category A waste. Developing the proper management of infectious disease materials is essential to close the gaps identified so that states and governmental entities can act accordingly based on the regulations and guidance developed, and to ensure public safety. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  3. Physician and Staff Acceptance of Care Managers in Primary Care Offices.

    PubMed

    Malouin, Jean M; Malouin, Rebecca A; Sarinopoulos, Issidoros; Beisel, Marie; Bechel-Marriot, Diane; First, Amanda; Gamble, Ginger M; Tanner, Clare

    2017-01-01

    Embedded care managers are increasingly implemented as part of the care team within primary care practices, yet previous studies have indicated variability in acceptance by physicians and staff. This study assesses the acceptability of care managers among staff and physicians within the Michigan Primary Care Transformation (MiPCT) demonstration. Care manager acceptance was measured using a web-based survey distributed to practices participating in the MiPCT demonstration. Both physicians and staff reported high levels of care manager acceptance. Longer length of care manager employment at the practice, higher care manager FTE dedicated to care management, and care manager employed by practice were all significantly associated with care manager acceptance. The MiPCT demonstration found high care manager acceptance across all care team members. The high level of acceptance may be due to the structures and processes developed by MiPCT to support implementation of care managers and the length of the intervention period. The MiPCT demonstration confirms that following three years of implementation, embedded care managers are acceptable to both physicians and staff within primary care practices. Importantly, embeddedness, or the amount of time care managers are located within practices, is associated with increased acceptance. © Copyright 2017 by the American Board of Family Medicine.

  4. Ethical pharmaceutical promotion and communications worldwide: codes and regulations

    PubMed Central

    2014-01-01

    The international pharmaceutical industry has made significant efforts towards ensuring compliant and ethical communication and interaction with physicians and patients. This article presents the current status of the worldwide governance of communication practices by pharmaceutical companies, concentrating on prescription-only medicines. It analyzes legislative, regulatory, and code-based compliance control mechanisms and highlights significant developments, including the 2006 and 2012 revisions of the International Federation of Pharmaceutical Manufacturers and Associations (IFPMA) Code of Practice. Developments in international controls, largely built upon long-established rules relating to the quality of advertising material, have contributed to clarifying the scope of acceptable company interactions with healthcare professionals. This article aims to provide policy makers, particularly in developing countries, with an overview of the evolution of mechanisms governing the communication practices, such as the distribution of promotional or scientific material and interactions with healthcare stakeholders, relating to prescription-only medicines. PMID:24679064

  5. Ethical pharmaceutical promotion and communications worldwide: codes and regulations.

    PubMed

    Francer, Jeffrey; Izquierdo, Jose Zamarriego; Music, Tamara; Narsai, Kirti; Nikidis, Chrisoula; Simmonds, Heather; Woods, Paul

    2014-03-29

    The international pharmaceutical industry has made significant efforts towards ensuring compliant and ethical communication and interaction with physicians and patients. This article presents the current status of the worldwide governance of communication practices by pharmaceutical companies, concentrating on prescription-only medicines. It analyzes legislative, regulatory, and code-based compliance control mechanisms and highlights significant developments, including the 2006 and 2012 revisions of the International Federation of Pharmaceutical Manufacturers and Associations (IFPMA) Code of Practice.Developments in international controls, largely built upon long-established rules relating to the quality of advertising material, have contributed to clarifying the scope of acceptable company interactions with healthcare professionals. This article aims to provide policy makers, particularly in developing countries, with an overview of the evolution of mechanisms governing the communication practices, such as the distribution of promotional or scientific material and interactions with healthcare stakeholders, relating to prescription-only medicines.

  6. Restoring wisdom to the practice of psychiatry.

    PubMed

    Boyce, Philip

    2006-03-01

    While psychiatry is an exciting and rewarding discipline of medicine, the practice of psychiatry has become increasingly simplistic. This address seeks to identify some of the influences that underlie this phenomenon. The influences include an increased demand for services and pressure on beds, the sway of the pharmaceutical industry with a biological approach being promulgated, excessive managerial constraints with an emphasis on efficiency versus effectiveness, and the acceptance of DSM diagnostic categories of uncertain validity. I argue that we need to rediscover a more wise approach to psychiatric practice. We have to insist upon changes to our training such that trainees are encouraged to get to know their patients and understand them from a biopsychosocial perspective. As a profession, we have to insist on proper care for our patients and work with managers and bureaucrats to ensure that the management of our patients is centred on quality of care and effectiveness over and above efficiency.

  7. 78 FR 13071 - Guidance for Industry: Implementation of an Acceptable Full-Length and Abbreviated Donor History...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-26

    ...] Guidance for Industry: Implementation of an Acceptable Full- Length and Abbreviated Donor History... Full-Length and Abbreviated Donor History Questionnaires and Accompanying Materials for Use in... full-length and abbreviated donor history questionnaires and accompanying materials, version 1.2 dated...

  8. Effect of educational interventions and medical school policies on medical students' attitudes toward pharmaceutical marketing practices: a multi-institutional study.

    PubMed

    Kao, Audiey C; Braddock, Clarence; Clay, Maria; Elliott, Donna; Epstein, Scott K; Filstead, William; Hotze, Tim; May, Win; Reenan, Jennifer

    2011-11-01

    To determine the effect of educational interventions on medical students' attitudes toward pharmaceutical industry marketing practices and whether restrictive medical school policies governing medicine-industry interactions are associated with student support for banning such interactions. Prospective cohort study involving the graduating classes of 2009 (intervention, n=474) and 2010 (control, n=459) at four U.S. medical schools. Intervention students experienced a former pharmaceutical representative's presentation, faculty debate, and a Web-based course. Both groups completed baseline and follow-up attitude surveys about pharmaceutical marketing. A total of 482 students (51.6%) completed both surveys. In regression analyses, intervention students were more likely than control students to think that physicians are strongly or moderately influenced by pharmaceutical marketing (OR, 2.29; 95% CI, 1.46-3.59) and believed they would be more likely to prescribe a company's drug if they accepted that company's gifts and food (OR, 1.68; 95% CI, 1.12-2.52). Intervention students were more likely to support banning interactions between pharmaceutical representatives and students (OR, 4.82; 95% CI, 3.02-7.68) and with physicians (OR, 6.88; 95% CI, 4.04-11.70). Students from schools with more restrictive policies were more likely to support banning interactions between pharmaceutical representatives and students (OR, 1.99; 95% CI, 1.26-3.16) and with physicians (OR, 3.44; 95% CI, 2.05-5.79). Education about pharmaceutical marketing practices and more restrictive policies governing medicine-industry interactions seem to increase medical students' skepticism about the appropriateness of such marketing practices and disapproval of pharmaceutical representatives in the learning environment.

  9. Search for technological advantages and commercial success in sensor applications: lessons of industrial trials for fiber multianalyzer technology

    NASA Astrophysics Data System (ADS)

    McMillan, Norman D.; Baker, M.; O'Neill, M.; Smith, Stuart; Augousti, Andreas T.; Mason, Julian; Ryan, Bernard; Ryan, R. A.

    1999-01-01

    The multianalyzer is a powerful amplitude modulated fiber optic sensor which is perhaps quite typical of so many sensor innovations in that it is a technology looking for an application. Consequently, a series of collaborations with fruit juice, brewing, distilling, biotechnology and polymer industries were made with the objective of identifying potential applications of the multianalyzer. An assessment of these interactions is made for each of the industrial fields explored, by giving for each, just one positive result from the work. The results are then critically assessed. While these studies have illustrated the universal nature of the technology, in every case, lessons have been drawn of a general nature. This experience in particular underlined the difficulty in acceptance of a fiber based technology in industrial process monitoring, against the backdrop of the conservative practice of industry with long established instrumentation. The hard won experience of this product development has shown the vital important of technologists understanding the difference between the marketing concepts of features, benefits and advantages. Three categories of conclusions are drawn, the technical, the commercial, and finally, conclusions drawn from generalizations of the project by the Kingston partners based on their own independent experience in sensor development involving industrial and medical collaborations.

  10. Potential for improved radiation thermometry measurement uncertainty through implementing a primary scale in an industrial laboratory

    NASA Astrophysics Data System (ADS)

    Willmott, Jon R.; Lowe, David; Broughton, Mick; White, Ben S.; Machin, Graham

    2016-09-01

    A primary temperature scale requires realising a unit in terms of its definition. For high temperature radiation thermometry in terms of the International Temperature Scale of 1990 this means extrapolating from the signal measured at the freezing temperature of gold, silver or copper using Planck’s radiation law. The difficulty in doing this means that primary scales above 1000 °C require specialist equipment and careful characterisation in order to achieve the extrapolation with sufficient accuracy. As such, maintenance of the scale at high temperatures is usually only practicable for National Metrology Institutes, and calibration laboratories have to rely on a scale calibrated against transfer standards. At lower temperatures it is practicable for an industrial calibration laboratory to have its own primary temperature scale, which reduces the number of steps between the primary scale and end user. Proposed changes to the SI that will introduce internationally accepted high temperature reference standards might make it practicable to have a primary high temperature scale in a calibration laboratory. In this study such a scale was established by calibrating radiation thermometers directly to high temperature reference standards. The possible reduction in uncertainty to an end user as a result of the reduced calibration chain was evaluated.

  11. Environmental due diligence within multinational corporations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MacLean, R.

    1997-08-01

    Superfund and other state and federal regulations that emerged during the 80`s dramatically changed the way corporations managed property transactions. At the beginning of that decade there were very few engineers experienced in environmental due diligence. Over the past 15 years a sophisticated consulting industry has emerged to support companies in their effort to minimize liabilities associated with contaminated property. There is now a wealth of published literature on environmental due diligence, including generally accepted standards for investigating property contamination from organizations such as ASTM. This paper examines the current state of environmental due diligence among multinationals. It presents themore » underlying reasons for the current ad hoc nature of due diligence investigations and what companies can do to improve their policies and communication networks. A summary is given of the best practices used by industry leaders to minimize liabilities.« less

  12. Modified SPC for short run test and measurement process in multi-stations

    NASA Astrophysics Data System (ADS)

    Koh, C. K.; Chin, J. F.; Kamaruddin, S.

    2018-03-01

    Due to short production runs and measurement error inherent in electronic test and measurement (T&M) processes, continuous quality monitoring through real-time statistical process control (SPC) is challenging. Industry practice allows the installation of guard band using measurement uncertainty to reduce the width of acceptance limit, as an indirect way to compensate the measurement errors. This paper presents a new SPC model combining modified guard band and control charts (\\bar{\\text{Z}} chart and W chart) for short runs in T&M process in multi-stations. The proposed model standardizes the observed value with measurement target (T) and rationed measurement uncertainty (U). S-factor (S f) is introduced to the control limits to improve the sensitivity in detecting small shifts. The model was embedded in automated quality control system and verified with a case study in real industry.

  13. Public perception and attitude towards chemical industry park in Dalian, Bohai Rim.

    PubMed

    He, Guizhen; Chen, Chunci; Zhang, Lei; Lu, Yonglong

    2018-04-01

    Recent decade has witnessed accelerating expansion of chemical industry and increasing conflicts between the local citizens, governmental authorities and project developers, especially in some coastal and port cities in China. Development and transformation of chemical industrial parks has been adopted as a national initiative recently. However, there is a paucity of research examining public perspectives on chemical industrial parks and their risks. Aiming to understand public perception, attitude, and response and the factors underlying the support/acceptance of chemical industry park, this paper investigated 418 residents neighboring to two chemical industrial parks, Dalian in Bohai Rim through face-to-face questionnaire survey. The results showed the knowledge of the respondents on the chemical industrial parks development was very limited. The respondents had complex perceptions on the environmental impacts, risks control, social-economic benefits, and problem awareness. The current levels of information disclosure and public participation were very low. The central governmental official (44.3%) was the most trustworthy group by the respondents. Only 5.5% and 23.2% of the respondents supported the construction of a new CIP nearby and far away their homes, whilst 13% thought new CIP project as acceptable. The spearman correlation analysis results showed a strong NIMBY effect (Not In My Backyard). Factor analysis results demonstrated five latent factors: knowledge, benefit, information, trust, and participation. Multiple linear regression analysis indicated how socio-demographic differences and five latent factors might impact on the support/acceptance of the chemical industrial parks. Education level, trust, information, and participation were significant predictors of public support/acceptance level. This study contributes to our limited knowledge and understanding of public sentiments to the chemical industry parks in China. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Process Improvements in Training Device Acceptance Testing: A Study in Total Quality Management

    DTIC Science & Technology

    1990-12-12

    Quality Management , a small group of Government and industry specialists examined the existing training device acceptance test process for potential improvements. The agreed-to mission of the Air Force/Industry partnership was to continuously identify and promote implementable approaches to minimize the cost and time required for acceptance testing while ensuring that validated performance supports the user training requirements. Application of a Total Quality process improvement model focused on the customers and their requirements, analyzed how work was accomplished, and

  15. 23 CFR 750.708 - Acceptance of state zoning.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... within areas . . . which are zoned industrial or commercial under authority of State law.” Section 131(d) further provides, “The States shall have full authority under their own zoning laws to zone areas for commercial or industrial purposes, and the actions of the States in this regard will be accepted for the...

  16. The evolution of sustainable remediation in Australia and New Zealand: A storyline.

    PubMed

    Smith, Garry; Nadebaum, Peter

    2016-12-15

    This article describes the 'storyline' of the early and recent growth of sustainable remediation (SR) practice in Australia and New Zealand (ANZ), in order to inform and support other SR stakeholders, and to identify some lessons learned. Achievement of full acceptance and consistency across relevant ANZ regulatory jurisdictions and industry sectors will take time and will require publication of successful examples of SR application. The article describes the respective policy and regulatory contexts for sustainable remediation practice in Australia and in New Zealand; several milestone activities and events in the growth of SR in ANZ; and example SR methodologies and policies produced by stakeholders and remediation practitioners including the Sustainable Remediation Forum of Australia and New Zealand (SuRF ANZ). Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Closing the door on pharma? A national survey of family medicine residencies regarding industry interactions.

    PubMed

    Fugh-Berman, Adriane; Brown, Steven R; Trippett, Rachel; Bell, Alicia M; Clark, Paige; Fleg, Anthony; Siwek, Jay

    2011-05-01

    To assess the extent and type of interactions U.S. family medicine residencies permit industry to have with medical students and residents. In 2008, the authors e-mailed a four-question survey to residency directors or coordinators at all 460 accredited U.S. family medicine residencies concerning the types of industry support and interaction permitted. The authors conducted quantitative and qualitative analyses of survey responses and written comments. Residencies that did not permit any industry food, gifts, samples, or support of residency activities were designated "pharma-free." The survey response rate was 62.2% (286/460). Among responding family medicine residencies, 52.1% refused drug samples, 48.6% disallowed industry gifts or food, 68.5% forbade industry-sponsored residency activities, and 44.1% denied industry access to students and residents at the family medicine center. Seventy-five residencies (26.2%) were designated as "pharma-free." Medical-school-based and medical-school-administered residencies were no more likely than community-based residencies to be pharma-free. Among the 211 programs that permitted interaction, 68.7% allowed gifts or food, 61.1% accepted drug samples, 71.1% allowed industry representatives access to trainees in the family medicine center, and 37.9% allowed industry-sponsored residency activities. Respondents commented on challenges inherent to limiting industry interactions. Many programs noted recent changes in plans or practices. Most family medicine residencies limit industry interaction with trainees. Because industry interactions can have adverse effects on rational prescribing, residency programs should assess the benefits and harms of these relationships. Copyright © by the Association of American medical Colleges.

  18. Direct-to-consumer-advertising of prescription medicines: a theoretical approach to understanding.

    PubMed

    Harker, Michael; Harker, Debra

    2007-01-01

    The pharmaceutical industry is a leader in research and development investment. New treatments need to be communicated to the market, and consumers are increasingly interested in learning about new drugs. Direct to consumer advertising of prescription medicines (DTCA) is a controversial practice where many of the arguments for and against are not supported by strong evidence. This paper aims to contribute to a research agenda that is forming in this area. The paper reports on a systematic review that was conducted and applies accepted theoretical models to the DTCA context. The systematic review methodology is widely accepted in the medical sector and is successfully applied here in the marketing field. The hierarchy of effects model is specifically applied to DTCA with a clear emphasis on consumer rights, empowerment, protection and knowledge. This paper provides healthcare practitioners with insight into how consumers process DTCA messages and provides guidance into how to assist in this message processing.

  19. Norwegian medical students' attitudes towards the pharmaceutical industry.

    PubMed

    Lea, Dordi; Spigset, Olav; Slørdal, Lars

    2010-07-01

    Whereas there is a considerable body of information on the interaction between physicians and the pharmaceutical industry, little is known about the pharmaceutical industry-medical student relationship. We have assessed the extent of contact between Norwegian medical students and the pharmaceutical industry as well as the attitudes of these students towards the pharmaceutical industry. A self-assessment questionnaire was distributed to fifth- and sixth-year students attending the four medical schools in Norway and to Norwegian medical students attending selected universities abroad. A total of 65.8% of all eligible students returned a completed questionnaire. Of these, 73.9% had been exposed to various levels of contact with the pharmaceutical industry, but only 17.5% reported having a generally positive attitude towards the industry. The level of exposure did not correlate in students' attitudes; rather, it correlated positively to a feeling of competence in terms of being able to handle such interactions. A majority of students responded that while they would decline accepting monetary gifts, they would welcome receiving reimbursements for meeting expenses, meals and educational material. Students favoured a practice of full disclosure of potential industry-related conflicts of interest among the university teaching staff. There were considerable differences in the students' attitudes between universities, suggesting that medical students are prone to influence from university lecturers. Norwegian medical students are opinionated, critical and curious with respect to pharmaceutical industry relations. This interest can be explored and probably also modified by educational initiatives.

  20. Airline business continuity and IT disaster recovery sites.

    PubMed

    Haji, Jassim

    2016-01-01

    Business continuity is defined as the capability of the organisation to continue delivery of products or services at acceptable predefined levels following a disruptive incident. Business continuity is fast evolving to become a critical and strategic decision for any organisation. Transportation in general, and airlines in particular, is a unique sector with a specialised set of requirements, challenges and opportunities. Business continuity in the airline sector is a concept that is generally overlooked by the airline managements. This paper reviews different risks related to airline processes and will also propose solutions to these risks based on experiences and good industry practices.

  1. Department of Energy Construction Safety Reference Guide

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1993-09-01

    DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

  2. Understanding What It Means for Assurance Cases to "Work"

    NASA Technical Reports Server (NTRS)

    Rinehart, David J.; Knight, John C.; Rowanhill, Jonathan

    2017-01-01

    This report is the result of our year-long investigation into assurance case practices and effectiveness. Assurance cases are a method for working toward acceptable critical system performance. They represent a significant thread of applied assurance methods extending back many decades and being employed in a range of industries and applications. Our research presented in this report includes a literature survey of over 50 sources and interviews with nearly a dozen practitioners in the field. We have organized our results into seven major claimed assurance case benefits and their supporting mechanisms, evidence, counter-evidence, and caveats.

  3. Cold sweetening diversity in Andean potato germplasm from Argentina.

    PubMed

    Colman, Silvana L; Massa, Gabriela A; Carboni, Martín F; Feingold, Sergio E

    2017-11-01

    Cold-induced sweetening (CIS) is the accumulation of sucrose and reducing sugars in potato tubers at low temperatures. This process is central for the potato processing industry. During potato chip and French fry production, reducing sugars participate in the Maillard reaction to produce dark pigmented products not acceptable to consumers. Andean potatoes (Solanum tuberosum Group Andigena) constitute an enormous wealth of potato germplasm that can contribute to increase genetic diversity in breeding programs of many traits, including CIS. We analyzed reducing sugar content and chip quality in freshly harvested and cold-stored tubers from 48 native accessions. Andean accessions showed high variation in reducing sugar content and were classified in three types of CIS responses: type I, reducing sugar content before and after 4°C storage was lower than the value required by industry; type II, reducing sugar content before storage was acceptable, but after 4°C storage incremented up to non-acceptable levels; and type III, reducing sugar content was unacceptable before and after storage. Five Andean accessions presented acceptable reducing sugar content and good chip quality before and after 4°C storage in a consistent manner throughout several experiments. These features make them a useful source for improving the potato industry. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  4. 46 CFR 28.73 - Accepted organizations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Accepted organizations. 28.73 Section 28.73 Shipping... INDUSTRY VESSELS General Provisions § 28.73 Accepted organizations. An organization desiring to be designated by the Commandant as an accepted organization must request such designation in writing. As a...

  5. [German physicians' access to professional knowledge. Acceptance, quality and availability of professional information with special reference to electronic information media].

    PubMed

    Reng, Carl-Michael; Friedrich, Hans-Jürgen; Timmer, Antje; Schölmerich, Jürgen

    2003-11-15

    The growing relevance of continuous medical education is evident. Also information retrieval helping to solve clinical problems yet at the patient's bedside becomes more and more important. This study challenges common and coming methods of information retrieval applied by German physicians. It helps answering the question which advantage or disadvantage due to the chosen method of information acquisition may arise. It also shows which practical relevance and which grade of quality the information seeking doctor may anticipate. A questionnaire was sent out to all registered clinicians in hospital and practice in Germany. Not only traditional means of information retrieval were analyzed. Also, a lot of the questions posed focused on the acceptance and use of new media in the professional context. About 16,000 colleagues answered by filling in the complete form therewith allowing a deep insight into their informational needs and habits. While traditional media like books and scientific papers enjoy wide public confidence, the acceptance and estimated reliability of virtual sources of information today still remain restrained. The lack of transparency of the virtual sources and ways of information within the web according to often imprecise rules for quality assurance lead to major complaint. Information offered directly by the industry has a very low rate of acceptance. To gain higher confidence in electronic media presenting professional knowledge and advanced medical training, the development of technological advantages today seems to be less relevant. Work on the transparency of the informational structures including clear definition of resources and clear indication of possible conflicts of interest are just as important as a comprehensible quality of forthcoming medical content.

  6. Attitudes and Relationship between Physicians and the Pharmaceutical Industry in a Public General Hospital in Lima, Peru

    PubMed Central

    De Ferrari, Aldo; Gentille, Cesar; Davalos, Long; Huayanay, Leandro; Malaga, German

    2014-01-01

    Background The interaction between physicians and the pharmaceutical industry influences physicians' attitudes and prescribing behavior. Although largely studied in the US, this topic has not been well studied in resource-poor settings, where a close relationship between physicians and industry still exists. Objective To describe physician interactions with and attitudes towards the pharmaceutical industry in a public general hospital in Lima, Peru. Design Descriptive, cross-sectional study through an anonymous, self-filled questionnaire distributed among faculty and trainee physicians of five different clinical departments working in a Peruvian public general hospital. A transcultural validation of an existing Spanish questionnaire was performed. Exposure to marketing activities, motivations to contact pharmaceutical representatives and attitudes towards industry were studied. Collected data was analyzed by degree of training, clinical department, gender and teaching status. Attitudes were measured on a four-point LIKERT scale. Results 155 physicians completed the survey, of which 148 were included in the study sample. 94.5% of attending physicians reported ongoing encounters with pharmaceutical representatives. The most common industry-related activities were receiving medical samples (91.2%), promotional material (87.8%) and attending meetings in restaurants (81.8%). Respondents considered medical samples and continuing medical education the most ethically acceptable benefits. We found significant differences between attendings and residents, and teaching and non-teaching attendings. An association between the amount of encounters with pharmaceutical representatives, and attitudes towards industry and acceptance of medical samples was found. Conclusions A close physician-industry relationship exists in the population under study. The contact is established mainly through pharmaceutical representatives. Medical samples are the most received and ethically accepted benefit. The attitudes of physicians on the ethical standards of acceptance of medical samples and other benefits are closely related with their exposure to the pharmaceutical industry. Future studies could explore the motivations of physicians working in resource-poor settings to maintain a close relationship with industry. PMID:24978481

  7. Attitudes and relationship between physicians and the pharmaceutical industry in a public general hospital in Lima, Peru.

    PubMed

    De Ferrari, Aldo; Gentille, Cesar; Davalos, Long; Huayanay, Leandro; Malaga, German

    2014-01-01

    The interaction between physicians and the pharmaceutical industry influences physicians' attitudes and prescribing behavior. Although largely studied in the US, this topic has not been well studied in resource-poor settings, where a close relationship between physicians and industry still exists. To describe physician interactions with and attitudes towards the pharmaceutical industry in a public general hospital in Lima, Peru. Descriptive, cross-sectional study through an anonymous, self-filled questionnaire distributed among faculty and trainee physicians of five different clinical departments working in a Peruvian public general hospital. A transcultural validation of an existing Spanish questionnaire was performed. Exposure to marketing activities, motivations to contact pharmaceutical representatives and attitudes towards industry were studied. Collected data was analyzed by degree of training, clinical department, gender and teaching status. Attitudes were measured on a four-point LIKERT scale. 155 physicians completed the survey, of which 148 were included in the study sample. 94.5% of attending physicians reported ongoing encounters with pharmaceutical representatives. The most common industry-related activities were receiving medical samples (91.2%), promotional material (87.8%) and attending meetings in restaurants (81.8%). Respondents considered medical samples and continuing medical education the most ethically acceptable benefits. We found significant differences between attendings and residents, and teaching and non-teaching attendings. An association between the amount of encounters with pharmaceutical representatives, and attitudes towards industry and acceptance of medical samples was found. A close physician-industry relationship exists in the population under study. The contact is established mainly through pharmaceutical representatives. Medical samples are the most received and ethically accepted benefit. The attitudes of physicians on the ethical standards of acceptance of medical samples and other benefits are closely related with their exposure to the pharmaceutical industry. Future studies could explore the motivations of physicians working in resource-poor settings to maintain a close relationship with industry.

  8. 48 CFR 811.103-70 - Technical industry standards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

  9. 48 CFR 811.103-70 - Technical industry standards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

  10. 48 CFR 811.103-70 - Technical industry standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

  11. 48 CFR 811.103-70 - Technical industry standards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

  12. Efficacy testing of cosmetic products. A proposal to the European Community by the Danish Environmental Protection Agency, Ministry of Environment and Energy.

    PubMed

    Serup, J

    2001-08-01

    Regulations for cosmetic products primarily address safety of the products that may be used by large populations of healthy consumers. Requirements for documentation of efficacy claims are only fragmentary. This synopsis aims to review and conclude a set of standards that may be acceptable to the European Community, and the cosmetic industry, as a legal standard for efficacy documentation in Europe in the future. Ethical, formal, experimental, statistical and other aspects of efficacy testing are described, including validation, quality control and assurance. The importance of user relevant clinical end points, a controlled randomized trial design and evidence-based cosmetic product documentation, validation of methods, statistical power estimation and proper data handling, reporting and archiving is emphasized. The main principles of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH) good clinical practice (GCP) should be followed by the cosmetics industry in a spirit of good documentation standard and scientific soundness, but full GCP is not considered mandatory in the field of cosmetics. Documentation by validated bio-instrumental methods may be acceptable, but efficacy documentation based on information about raw materials, reference to literature and laboratory experiments are only acceptable in exceptional cases. Principles for efficacy substantiation of cosmetic products in Europe, as described in this synopsis, are officially proposed by the Danish Ministry of Environment and Energy to the European Community as a basis for an amendment to the Cosmetics Directive or otherwise implemented as a European Community regulation.

  13. Women in the Construction Industry in the U.K.: a Cultural Discord?

    NASA Astrophysics Data System (ADS)

    Bagilhole, Barbara M.; Dainty, Andrew R. J.; Neale, Richard H.

    The construction industry is the most male dominated of all industrial sectors in the United Kingdom. This article reports on a study that explored women's and men's experiences of working in the industry, focusing on how the cultural aspects of the workplace environment impinged upon women's career development. We interviewed more than 80 male and female construction professionals from large construction organizations, and compared their career accounts in order to establish the aspects of the workplace culture that had a gender-differentiated impact on progression. We found that construction organizations formed competitive "power" cultures where women's contributions were marginalized and their careers impeded through a combination of inflexible work practices and discriminatory behavior. These barriers to women's careers were maintained in small project teams by autonomous male operational managers. Their locus of control embraced recruitment, promotion, and staff development, which allowed them to sustain a workplace culture intolerant of nontraditional entrants. We conclude that this cultural environment is likely to remain problematic for women unless it can be changed in a way that values their contribution. This requires a radical shift in middle management attitudes, a departure from current organizational human resource management systems, and a wider acceptance of the need for cultural change within the industry.

  14. The impact of effective patents on future innovations in nanomedicine.

    PubMed

    Bosetti, Rita; Vereeck, Lode

    2012-03-01

    The success of nanomedicine is dependent upon an effective protection of IP rights. Unfortunately, the US nanomedicine patent system is dysfunctional because long R&D procedures as well as the patent pendency are insufficiently taken into account. This could be solved by changing the patent-protection starting point and increasing the capacity of the US PTO. The nanotechnology industry also suffers from overlapping patents. This could be avoided by improving the expertise of the PTO, using a more accurate definition of nanotechnology and devising a generally accepted nomenclature that enhances prior-art searches. To avoid disputes, inference practices and strategic patenting can be used. In the case of a dispute, parties can fall back on re-examination, cross-licensing and patent litigation. Cross-licensing agreements are recommended since they allows parties to access technology, create synergies and exclude third-party competitors. Solving the patent problems in the nanotechnology industry is a necessary step for future success.

  15. Students' responses to authentic assessment designed to develop commitment to performing at their best

    NASA Astrophysics Data System (ADS)

    Guzzomi, Andrew L.; Male, Sally A.; Miller, Karol

    2017-05-01

    Engineering educators should motivate and support students in developing not only technical competence but also professional competence including commitment to excellence. We developed an authentic assessment to improve students' understanding of the importance of 'perfection' in engineering - whereby 50% good enough will not be acceptable in industry. Subsequently we aimed to motivate them to practise performing at their best when they practice engineering. Students in a third-year mechanical and mechatronic engineering unit completed a team design project designed with authentic assessment features to replicate industry expectations and a novel marking scheme to encourage the pursuit of excellence. We report mixed responses from students. Students' ratings of their levels of effort on this assessment indicate that many perceived a positive influence on their effort. However, students' comments included several that were consistent with students experiencing the assessment as alienating.

  16. Premedical students' exposure to the pharmaceutical industry's marketing practices.

    PubMed

    Hodges, Laura E; Arora, Vineet M; Humphrey, Holly J; Reddy, Shalini T

    2013-02-01

    Physicians' exposure to pharmaceutical industry marketing raises concerns about their ability to make unbiased, evidence-based prescription decisions. This exposure begins early in medical education. The authors examined the frequency and context of such exposures for students before matriculation to medical school. The authors distributed two separate but related questionnaires to all 389 students who matriculated at the University of Chicago Pritzker School of Medicine between 2007 and 2010. The survey inquired about interactions with the pharmaceutical industry before entering medical school. Descriptive statistics and Wilcoxon rank sum tests were used to analyze data. Across four years, 282 (72.5%) students responded to the first survey; 219 (56.3%) responded to the follow-up survey. The majority of those (62.1%) had interacted with or were exposed to pharmaceutical marketing before medical school. The most common interactions were accepting a pen (50.2%) and attending a sponsored lunch (37.9%), which occurred most commonly while shadowing (33.6% and 42.2%, respectively). The next most common interactions were receiving a small gift (24.7%) and attending a sponsored dinner (20.6%), which occurred most commonly in "other" contexts, such as through family and while working in a medical setting (48.2% and 48.9%, respectively). The majority of students had interacted with the pharmaceutical industry before medical school. The differences in context indicate that students enter medical school with a heterogeneous set of exposures to pharmaceutical marketing. Medical schools should consider interventions to enhance students' knowledge of the impact of pharmaceutical marketing on physicians' prescribing practices.

  17. Physician leadership: influence on practice-based learning and improvement.

    PubMed

    Prather, Stephen E; Jones, David N

    2003-01-01

    In response to the technology and information explosion, practice-based learning and improvement is emerging within the medical field to deliver systematic practice-linked improvements. However, its emergence has been inhibited by the slow acceptance of evidence-based medicine among physicians, who are reluctant to embrace proven high-performance leadership principles long established in other high-risk fields. This reluctance may be attributable to traditional medical training, which encourages controlling leadership styles that magnify the resistance common to all change efforts. To overcome this resistance, physicians must develop the same leadership skills that have proven to be critical to success in other service and high-performance industries. Skills such as self-awareness, shared authority, conflict resolution, and nonpunitive critique can emerge in practice only if they are taught. A dramatic shift away from control and blame has become a requirement for achieving success in other industries based on complex group process. This approach is so mainstream that the burden of proof that cooperative leadership is not a requirement for medical improvement falls to those institutions perpetuating the outmoded paradigm of the past. Cooperative leadership skills that have proven central to implementing change in the information era are suggested as a core cultural support for practice-based learning and improvement. Complex adaptive systems theory, long used as a way to understand evolutionary biology, and more recently computer science and economics, predicts that behavior emerging among some groups of providers will be selected for duplication by the competitive environment. A curriculum framework needed to teach leadership skills to expand the influence of practice-based learning and improvement is offered as a guide to accelerate change.

  18. IEC 61511 and the capital project process--a protective management system approach.

    PubMed

    Summers, Angela E

    2006-03-17

    This year, the process industry has reached an important milestone in process safety-the acceptance of an internationally recognized standard for safety instrumented systems (SIS). This standard, IEC 61511, documents good engineering practice for the assessment, design, operation, maintenance, and management of SISs. The foundation of the standard is established by several requirements in Part 1, Clauses 5-7, which cover the development of a management system aimed at ensuring that functional safety is achieved. The management system includes a quality assurance process for the entire SIS lifecycle, requiring the development of procedures, identification of resources and acquisition of tools. For maximum benefit, the deliverables and quality control checks required by the standard should be integrated into the capital project process, addressing safety, environmental, plant productivity, and asset protection. Industry has become inundated with a multitude of programs focusing on safety, quality, and cost performance. This paper introduces a protective management system, which builds upon the work process identified in IEC 61511. Typical capital project phases are integrated with the management system to yield one comprehensive program to efficiently manage process risk. Finally, the paper highlights areas where internal practices or guidelines should be developed to improve program performance and cost effectiveness.

  19. Color: an exosomatic organ?

    NASA Astrophysics Data System (ADS)

    van Brakel, Jaap; Saunders, Barbara

    2001-12-01

    According to the dominant view in cognitive science, in particular in its more popularized versions, color sensings or perceptions are located in a 'quality space'. This space has three dimensions: hue (the chromatic aspect of color), saturation (the 'intensity' of hue), and brightness. This space is structured further via a small number of primitive hues or landmark colors, usually four (red, yellow, green, blue) or six (if white and black are included). It has also been suggested that there are eleven semantic universals - the six colors previously mentioned plus orange, pink, brown, purple, and grey. Scientific evidence for these widely accepted theories is at best minimal, based on sloppy methodology and at worst non-existent. Against the standard view, it is argued that color might better be regarded as the outcome of a social-historical developmental trajectory in which there is mutual shaping of philosophical presuppositions, scientific theories, experimental practices, technological tools, industrial products, rhetorical frameworks, and their intercalated and recursive interactions with the practices of daily life. That is: color, the domain of color, is the outcome of interactive processes of scientific, instrumental, industrial, and everyday lifeworlds. That is: color might better be called an exosomatic organ, a second nature.

  20. Dose Uniformity of Scored and Unscored Tablets: Application of the FDA Tablet Scoring Guidance for Industry.

    PubMed

    Ciavarella, Anthony B; Khan, Mansoor A; Gupta, Abhay; Faustino, Patrick J

    This U.S. Food and Drug Administration (FDA) laboratory study examines the impact of tablet splitting, the effect of tablet splitters, and the presence of a tablet score on the dose uniformity of two model drugs. Whole tablets were purchased from five manufacturers for amlodipine and six for gabapentin. Two splitters were used for each drug product, and the gabapentin tablets were also split by hand. Whole and split amlodipine tablets were tested for content uniformity following the general chapter of the United States Pharmacopeia (USP) Uniformity of Dosage Units <905>, which is a requirement of the new FDA Guidance for Industry on tablet scoring. The USP weight variation method was used for gabapentin split tablets based on the recommendation of the guidance. All whole tablets met the USP acceptance criteria for the Uniformity of Dosage Units. Variation in whole tablet content ranged from 0.5 to 2.1 standard deviation (SD) of the percent label claim. Splitting the unscored amlodipine tablets resulted in a significant increase in dose variability of 6.5-25.4 SD when compared to whole tablets. Split tablets from all amlodipine drug products did not meet the USP acceptance criteria for content uniformity. Variation in the weight for gabapentin split tablets was greater than the whole tablets, ranging from 1.3 to 9.3 SD. All fully scored gabapentin products met the USP acceptance criteria for weight variation. Size, shape, and the presence or absence of a tablet score can affect the content uniformity and weight variation of amlodipine and gabapentin tablets. Tablet splitting produced higher variability. Differences in dose variability and fragmentation were observed between tablet splitters and hand splitting. These results are consistent with the FDA's concerns that tablet splitting can have an effect on the amount of drug present in a split tablet and available for absorption. Tablet splitting has become a very common practice in the United States and throughout the world. Tablets are often split to modify dose strength, make swallowing easier, and reduce cost to the consumer. To better address product quality for this widely used practice, the U.S. Food and Drug Administration (FDA) published a Guidance for Industry that addresses tablet splitting. The guidance provides testing criteria for scored tablets, which is a part of the FDA review process for drugs. The model drugs selected for this study were amlodipine and gabapentin, which have different sizes, shapes, and tablet scores. Whole and split amlodipine tablets were tested for drug content because of a concern that the low-dose strength may cause greater variability. Whole and split gabapentin tablets were tested for weight variation because of their higher dosage strength of 600 mg. All whole tablets met the acceptance criteria for the Uniformity of Dosage Units based on the guidance recommendations. When unscored amlodipine tablets were split by a splitter, all formulations did not meet the acceptance criteria. When fully scored gabapentin tablets were split by hand and by splitter, they met the acceptance criteria. The findings of this FDA study indicated physical characteristics such as size, shape, and tablet score can affect the uniformity of split tablets. © PDA, Inc. 2016.

  1. Navigating sticky areas in transdermal product development.

    PubMed

    Strasinger, Caroline; Raney, Sam G; Tran, Doanh C; Ghosh, Priyanka; Newman, Bryan; Bashaw, Edward D; Ghosh, Tapash; Shukla, Chinmay G

    2016-07-10

    The benefits of transdermal delivery over the oral route to combat such issues of low bioavailability and limited controlled release opportunities are well known and have been previously discussed by many in the field (Prausnitz et al. (2004) [1]; Hadgraft and Lane (2006) [2]). However, significant challenges faced by developers as a product moves from the purely theoretical to commercial production have hampered full capitalization of the dosage forms vast benefits. While different technical aspects of transdermal system development have been discussed at various industry meetings and scientific workshops, uncertainties have persisted regarding the pharmaceutical industry's conventionally accepted approach for the development and manufacturing of transdermal systems. This review provides an overview of the challenges frequently faced and the industry's best practices for assuring the quality and performance of transdermal delivery systems and topical patches (collectively, TDS). The topics discussed are broadly divided into the evaluation of product quality and the evaluation of product performance; with the overall goal of the discussion to improve, advance and accelerate commercial development in the area of this complex controlled release dosage form. Published by Elsevier B.V.

  2. Ergonomic workplace evaluation of an Asian garment-factory.

    PubMed

    Sarder, B; Imrhan, Sheik N; Mandahawi, Nabeel

    2006-12-01

    A large number of establishments in the garment industries of the world are situated in the southeastern part of Asia where labor is plentiful and cheap. Recent reports and observational studies suggest that employees in this industry often work under difficult conditions that are unacceptable in industrialized countries. This paper reports the results of an ergonomic study in an export garment manufacturing plant in South East Asia to evaluate the working conditions of the plant from an ergonomics/human factors perspective and to suggest possible solutions to management for implementation. The investigation was done by a questionnaire survey and by observations and measurements in the workplace. The results indicated that the plant conditions were stressful, involving long work hours with poor safety and labor relations, and that work equipment and the physical workplace design were acceptable ergonomic practices. A low-cost solution, presented to management by the investigators, was implemented and, over a period of six months, seemed to be the dominant reason for significant improvements in throughput (14.6%), reduction in absenteeism (65%), job satisfaction (40%), decrease in employee turnover (75%), and reduction in health complaints (50%).

  3. Strategic aspects of higher education reform to cultivate specialists in diagnostic and biopharma industry as applicable to Predictive, Preventive and Personalized Medicine as the Medicine of the Future.

    PubMed

    Studneva, М; Mandrik, M; Song, Sh; Tretyak, E; Krasnyuk, I; Yamada, Y; Tukavin, A; Ansari, A; Kozlov, I; Reading, C; Ma, Y; Krapfenbauer, K; Svistunov, A; Suchkov, S

    2015-01-01

    Predictive, Preventive and Personalized Medicine as the Medicine of the Future represents an innovative model for advanced healthcare and robust platform for relevant industrial branches for diagnostics and pharmaceutics. However, rapid market penetration of new medicines and technologies demands the implementation of reforms not only in the spheres of biopharmaceutical industries and healthcare, but also in education. Therefore, the problem of the fundamental, modern preparation of specialists in bioengineering and affiliated fields is becoming particularly urgent, and it requires significant revision of training programs of higher education practice into current medical universities. Modernization and integration of widely accepted medical and teaching standards require consolidation of both the natural sciences and medical sciences that may become the conceptual basis for a university medical education. The main goal of this training is not simply to achieve advanced training and expansion of technological skills, but to provide development of novel multifaceted approaches to build academic schools for future generations.

  4. Segmenting a general practitioner market to improve recruitment outcomes.

    PubMed

    Hemphill, Elizabeth; Kulik, Carol T

    2011-05-01

    Recruitment is an ongoing challenge in the health industry with general practitioner (GP) shortages in many areas beyond rural and Indigenous communities. This paper suggests a marketing solution that identifies different segments of the GP market for recruitment strategy development. In February 2008, 96 GPs in Australia responded to a mail questionnaire (of which 85 questionnaires were useable). A total of 350 GPs were sent the questionnaire. Respondents considered small sets of attributes in the decision to accept a new job at a general practice and selected the most and least important attribute from each set. We identified latent class clusters (cohorts) of GPs from the most-least important data. Three cohorts were found in the GP market, distinguishing practitioners who emphasised job, family or practice attributes in their decision to join a practice. Few significant demographic differences exist between the cohorts. A segmented GP market suggests two alternative recruitment strategies. One option is for general practices to target members of a single cohort (family-, job-, or practice-focussed GPs). The other option is for general practices to diversify their recruitment strategies to target all three cohorts (family-, job- and practice-focussed GPs). A single brand (practice) can have multiple advertising strategies with each strategy involving advertising activities targeting a particular consumer segment.

  5. Quantum ergonomics: shifting the paradigm of the systems agenda.

    PubMed

    Walker, Guy H; Salmon, Paul M; Bedinger, Melissa; Stanton, Neville A

    2017-02-01

    A paradigm is an accepted world view. If we do not continually question our paradigm then wider trends and movements will overtake the discipline leaving it ill adapted to future challenges. This Special Issue is an opportunity to keep systems thinking at the forefront of ergonomics theory and practice. Systems thinking prompts us to ask whether ergonomics, as a discipline, has been too timid? Too preoccupied with the resolution of immediate problems with industrial-age methods when, approaching fast, are developments which could render these operating assumptions an irrelevance. Practical case studies are presented to show how abstract systems problems can be tackled head-on to deliver highly innovative and cost-effective insights. The strategic direction of the discipline foregrounds high-quality systems problems. These are something the discipline is well able to respond to provided that the appropriate operating paradigms are selected. Practitioner Summary: High-quality systems problems are the future of the discipline. How do we convert obtuse sounding systems concepts into practical interventions? In this paper, the essence of systems thinking is distilled and practical case studies used to demonstrate the benefits of this new paradigm.

  6. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Driscoll, S.B.; Walton, T.C.

    Polyimides have gained wide acceptance for use in many aerospace composite, electrical, and industrial applications. The intent of this work is to share with the reader practical knowledge of how some of the currently available commercial systems perform. Several prepreg processable polyimide systems were evaluated for adhesive properties and characterized with the use of SEM, TGA, DSC, TMA, Dynamic Spectroscopy, and Force vs. Time Electronic Impact Analyses for comparison. The chemistry and nature of these resin systems is reviewed, including several BMIs (new hot melts examined)., Amide-Imides (Al) and Thermoplastic Polyimide (TPI). PMR-15 and a high temperature epoxy resin aremore » included for comparison of high temperature properties. 17 references.« less

  7. Patient awareness and acceptability of antenatal perineal massage.

    PubMed

    Ismail, S I M F; Emery, S J

    2013-11-01

    Antenatal perineal massage is recommended to reduce perineal trauma at the time of delivery. The practice has been shown to be acceptable to pregnant women taking part in research studies. The aim of this study was to establish its acceptability to pregnant women in day-to-day clinical practice, as well as their awareness of its technique. An anonymous self-construct questionnaire was given to mothers after their first delivery. A total of 113 questionnaires were returned over a 4-month period. With regard to acceptability, 61.4% of respondents indicated that the practice was acceptable, only 25.7% felt the practice was embarrassing and 56.7% were happy for their husband/partner to perform it for them. With respect to awareness, 37.2% of the respondents had heard about the practice, 9.7% knew it should be practised from 34 weeks onwards, 11.5% knew it should be maintained for 5-10 min and 30.1% knew it ought to be performed daily. This showed first time mothers' awareness of antenatal perineal massage to be low, despite the idea being acceptable to them, which calls for action to improve awareness and provide more instruction and encouragement to take up the practice.

  8. An industry perspective on commercial radioactive waste disposal conditions and trends.

    PubMed

    Romano, Stephen A

    2006-11-01

    The United States is presently served by Class-A, -B and -C low-level radioactive waste and naturally-occurring and accelerator-produced radioactive material disposal sites in Washington and South Carolina; a Class-A and mixed waste disposal site in Utah that also accepts naturally-occurring radioactive material; and hazardous and solid waste facilities and uranium mill tailings sites that accept certain radioactive materials on a site-specific basis. The Washington site only accepts low-level radioactive waste from 11 western states due to interstate Compact restrictions on waste importation. The South Carolina site will be subject to geographic service area restrictions beginning 1 July 2008, after which only three states will have continued access. The Utah site dominates the commercial Class-A and mixed waste disposal market due to generally lower state fees than apply in South Carolina. To expand existing commercial services, an existing hazardous waste site in western Texas is seeking a Class-A, -B and -C and mixed waste disposal license. With that exception, no new Compact facilities are proposed. This fluid, uncertain situation has inspired national level rulemaking initiatives and policy studies, as well as alternative disposal practices for certain low-activity materials.

  9. 77 FR 45357 - Draft Guidance for Industry and Food and Drug Administration Staff; Acceptance and Filing Review...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-31

    ... element(s). In order to enhance the consistency of our acceptance and filing decisions and to help... accepting and filing a PMA, thereby assuring the consistency of our acceptance and filing decisions. This... guidance and associated checklist clarify the necessary elements and contents of a complete PMA application...

  10. From creekology to geology: Finding and conserving oil on the Southern Plains, 1859--1930

    NASA Astrophysics Data System (ADS)

    Frehner, Brian

    This dissertation tells the story of the oil industry's westward migration from Pennsylvania to the Southern Plains states of Kansas, Oklahoma, and Texas and how different environments in these regions influenced prospectors' methods for finding oil. Petroleum engineers, geologists, and businessmen take center stage throughout the narrative, and I emphasize how their biases, values, and interests influenced the kind of knowledge produced. At the heart of this story lay a contest between professional, university-trained engineers and geologists and so-called practical oil men, or "wildcatters," who received their training less formally from surveying the landscape. Although both groups performed field work in their search for oil, I explore how each learned very different information from that activity. Wildcatters met with so much success that the oil industry failed to take geologists seriously for approximately fifty years after 1860 when the Pennsylvania oil boom started, and I argue that the environment played an important role in this contest for authority between oil prospectors who learned their trade through hands-on experience and those who learned it primarily in the classroom. I continue this theme by showing how the environment actively influenced the growing acceptance of geologists as the oil industry migrated west and companies with interests in Kansas, Oklahoma, and Texas began hiring geologists and establishing their own geological research departments. A pioneer in the use of geology, Henry L. Doherty, controlled Cities Service holding company and dispatched an army of geologists who discovered significant oil strikes in these states. Doherty's embrace of university-trained experts led him to advocate conservation of oil on the basis of geological and engineering principles. Practical men in Oklahoma, however, recognized the need for conservation even earlier and succeeded in lobbying their state legislature for laws which proved effective long before geologists and engineers entered the industry en masse. I show how the political battle over conservation between practical men and petroleum engineers and geologists underscores the complex and decades-long relationship between the oil industry and the natural world.

  11. Future Concepts for Realtime Data Interfaces for Control Centers

    NASA Technical Reports Server (NTRS)

    Kearney, Mike W., III

    2004-01-01

    Existing methods of exchanging realtime data between the major control centers in the International Space Station program have resulted in a patchwork of local formats being imposed on each Mission Control Center. This puts the burden on a data customer to comply with the proprietary data formats of each data supplier. This has increased the cost and complexity for each participant, limited access to mission data and hampered the development of efficient and flexible operations concepts. Ideally, a universal format should be promoted in the industry to prevent the unnecessary burden of each center processing a different data format standard for every external interface with another center. With the broad acceptance of XML and other conventions used in other industries, it is now time for the Aerospace industry to fully engage and establish such a standard. This paper will briefly consider the components that would be required by such a standard (XML schema, data dictionaries, etc.) in order to accomplish the goal of a universal low-cost interface, and acquire broad industry acceptance. We will then examine current approaches being developed by standards bodies and other groups. The current state of CCSDS panel work will be reviewed, with a survey of the degree of industry acceptance. Other widely accepted commercial approaches will be considered, sometimes complimentary to the standards work, but sometimes not. The question is whether de facto industry standards are in concert with, or in conflict with the direction of the standards bodies. And given that state of affairs, the author will consider whether a new program establishing its Mission Control Center should implement a data interface based on those standards. The author proposes that broad industry support to unify the various efforts will enable collaboration between control centers and space programs to a wider degree than is currently available. This will reduce the cost for programs to provide realtime access to their data, hence reducing the cost of access to space, and benefiting the industry as a whole.

  12. Practices and Processes of Leading High Performance Home Builders in the Upper Midwest

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Von Thoma, E.; Ojczyk, C.

    2012-12-01

    The NorthernSTAR Building America Partnership team proposed this study to gain insight into the business, sales, and construction processes of successful high performance builders. The knowledge gained by understanding the high performance strategies used by individual builders, as well as the process each followed to move from traditional builder to high performance builder, will be beneficial in proposing more in-depth research to yield specific action items to assist the industry at large transform to high performance new home construction. This investigation identified the best practices of three successful high performance builders in the upper Midwest. In-depth field analysis of themore » performance levels of their homes, their business models, and their strategies for market acceptance were explored. All three builders commonly seek ENERGY STAR certification on their homes and implement strategies that would allow them to meet the requirements for the Building America Builders Challenge program. Their desire for continuous improvement, willingness to seek outside assistance, and ambition to be leaders in their field are common themes. Problem solving to overcome challenges was accepted as part of doing business. It was concluded that crossing the gap from code-based building to high performance based building was a natural evolution for these leading builders.« less

  13. [The consumer in the face of change].

    PubMed

    Rolland, M F; Serville, Y

    1976-01-01

    The study on consumer behaviour done by the nutrition department of INSERM shows that there are opposing attitudes towards Change. Among the factors unfavorable to change are: reluctance to changing old habits, nostalgia for the past, suspicion towards industrially prepared foods, fear of food pollution, love for the art of good cooking. Among the factors favoring change are: the higher standard of living, the desire to save time, the change in the way of thinking about foods, the evolution of cooking practices, as well as a need for variety and quality. Man looks for change more for his own pleasure than by necessity. They can be positive pleasure such as: -- Sensory values (taste, zest, variety). -- Coenesthesic values (feeling of well-being, euphory). -- Emotional values (means of communication a gift). -- Symbolic values (prestige, personnalization, creativity, distraction). However there are also negative pleasures. That is all factors which decrease the effort or the work load such as: -- Health values (harmlessness, safety, maintaining attention). Practical values related to convenience (time saving, ease of storage). The favorizing these positive or negative pleasures will lead to change. The consumer will accept things which give a maximum of pleasure for the least effort. He will also accept something which by its taste, prestige, convenience and safety contributes to a better life.

  14. Of Fur, Feather, and Fin: Human’s Use and Concern for Non-Human Species

    PubMed Central

    Byrd, Elizabeth; Widmar, Nicole Olynk; Fulton, Joan

    2017-01-01

    Simple Summary An online survey of 825 U.S. residents was conducted to determine the level of approval for several uses of animals. More than 90% of respondents reported that using animals for egg production, service or therapy, pets, and milk production was acceptable to them. Older and male respondents more frequently found most of the animal uses surveyed acceptable. Half of respondents reported concern for the welfare of bison while 40% or more stated concern for the welfare of elk, beef cattle, and dairy cattle. Reported concern for animal species and acceptance of the use of animals were related in some instances. Respondents who stated they were concerned for the welfare of dairy cattle less frequently reported accepting using animals for meat production, livestock shows, and hunting. Abstract The public’s concern for animal welfare is evolving and it is important to consider factors that are related to concern for animals and their use by humans. An online survey of 825 U.S. residents was conducted. Relationships between approval of animal uses and stated concern for animal welfare were examined. More than 90% of respondents reported that using animals for egg production, service or therapy, pets, and milk production was acceptable to them. Respondents who were younger or reported being female less frequently found most uses acceptable than older or male respondents. Half of respondents reported concern for the welfare of bison while 40% or more stated concern for the welfare of elk, beef cattle, and dairy cattle. Respondents who stated they were concerned for the welfare of dairy cattle less frequently reported accepting using animals for meat production, livestock shows, and hunting. Thus, self-reported concern for animal species and acceptance of the use of animals were related in some instances. A better understanding of the factors related to acceptance of animal uses and concern for animal welfare will help animal-related industries and wildlife agencies develop practices that are consistent with public attitudes. PMID:28282913

  15. Transfer of training for aerospace operations: How to measure, validate, and improve it

    NASA Technical Reports Server (NTRS)

    Cohen, Malcolm M.

    1993-01-01

    It has been a commonly accepted practice to train pilots and astronauts in expensive, extremely sophisticated, high fidelity simulators, with as much of the real-world feel and response as possible. High fidelity and high validity have often been assumed to be inextricably interwoven, although this assumption may not be warranted. The Project Mercury rate-damping task on the Naval Air Warfare Center's Human Centrifuge Dynamic Flight Simulator, the shuttle landing task on the NASA-ARC Vertical Motion Simulator, and the almost complete acceptance by the airline industry of full-up Boeing 767 flight simulators, are just a few examples of this approach. For obvious reasons, the classical models of transfer of training have never been adequately evaluated in aerospace operations, and there have been few, if any, scientifically valid replacements for the classical models. This paper reviews some of the earlier work involving transfer of training in aerospace operations, and discusses some of the methods by which appropriate criteria for assessing the validity of training may be established.

  16. Adoption of information technology by resident physicians.

    PubMed

    Parekh, Selene G; Nazarian, David G; Lim, Charles K

    2004-04-01

    The Internet represents a technological revolution that is transforming our society. In the healthcare industry, physicians have been typified as slow adopters of information technology. However, young physicians, having been raised in a computer-prevalent society, may be more likely to embrace technology. We attempt to characterize the use and acceptance of the Internet and information technology among resident physicians in a large academic medical center and to assess concerns regarding privacy, security, and credibility of information on the Internet. A 41-question survey was distributed to 150 pediatric, medical, and surgical residents at an urban, academic medical center. One hundred thirty-five residents completed the survey (response rate of 90%). Responses were evaluated and statistical analysis was done. The majority of resident physicians in our survey have adopted the tools of information technology. Ninety-eight percent used the Internet and 96% use e-mail. Two-thirds of the respondents used the Internet for healthcare-related purposes and a similar percentage thought that the Internet has affected their practice of medicine positively. The majority of residents thought that Internet healthcare services such as electronic medical records, peer-support websites, and remote patient monitoring would be beneficial for the healthcare industry. However, they are concerned about the credibility, privacy, and security of health and medical information online. The majority of resident physicians in our institution use Internet and information technology in their practice of medicine. Most think that the Internet will continue to have a beneficial role in the healthcare industry.

  17. A proposed model of factors influencing hydrogen fuel cell vehicle acceptance

    NASA Astrophysics Data System (ADS)

    Imanina, N. H. Noor; Kwe Lu, Tan; Fadhilah, A. R.

    2016-03-01

    Issues such as environmental problem and energy insecurity keep worsening as a result of energy use from household to huge industries including automotive industry. Recently, a new type of zero emission vehicle, hydrogen fuel cell vehicle (HFCV) has received attention. Although there are argues on the feasibility of hydrogen as the future fuel, there is another important issue, which is the acceptance of HFCV. The study of technology acceptance in the early stage is a vital key for a successful introduction and penetration of a technology. This paper proposes a model of factors influencing green vehicle acceptance, specifically HFCV. This model is built base on two technology acceptance theories and other empirical studies of vehicle acceptance. It aims to provide a base for finding the key factors influencing new sustainable energy fuelled vehicle, HFCV acceptance which is achieved by explaining intention to accept HFCV. Intention is influenced by attitude, subjective norm and perceived behavioural control from Theory of Planned Behaviour and personal norm from Norm Activation Theory. In the framework, attitude is influenced by perceptions of benefits and risks, and social trust. Perceived behavioural control is influenced by government interventions. Personal norm is influenced by outcome efficacy and problem awareness.

  18. The impact of distributed computing on education

    NASA Technical Reports Server (NTRS)

    Utku, S.; Lestingi, J.; Salama, M.

    1982-01-01

    In this paper, developments in digital computer technology since the early Fifties are reviewed briefly, and the parallelism which exists between these developments and developments in analysis and design procedures of structural engineering is identified. The recent trends in digital computer technology are examined in order to establish the fact that distributed processing is now an accepted philosophy for further developments. The impact of this on the analysis and design practices of structural engineering is assessed by first examining these practices from a data processing standpoint to identify the key operations and data bases, and then fitting them to the characteristics of distributed processing. The merits and drawbacks of the present philosophy in educating structural engineers are discussed and projections are made for the industry-academia relations in the distributed processing environment of structural analysis and design. An ongoing experiment of distributed computing in a university environment is described.

  19. Surgical checklists: A detailed review of their emergence, development, and relevance to neurosurgical practice

    PubMed Central

    McConnell, Douglas J.; Fargen, Kyle M.; Mocco, J

    2012-01-01

    In the fall of 1999, the Institute of Medicine released “To Err is Human: Building a Safer Health System,” a sobering report on the safety of the American healthcare industry. This work and others like it have ushered in an era where the science of quality assurance has quickly become an integral facet of the practice of medicine. One critical component of this new era is the development, application, and refinement of checklists. In a few short years, the checklist has evolved from being perceived as an assault on the practitioner’ integrity to being welcomed as an important tool in reducing complications and preventing medical errors. In an effort to further expand the neurosurgical community's acceptance of surgical checklists, we review the rationale behind checklists, discuss the history of medical and surgical checklists, and remark upon the future of checklists within our field. PMID:22347672

  20. Demonstration, the solution to successful community acceptance of water recycling.

    PubMed

    Gibson, H E; Apostolidis, N

    2001-01-01

    The Department of Natural Resources in Queensland, Australia are presently carrying out a comprehensive Strategy called the Queensland Water Recycling Strategy (QWRS) to determine future Government directions in the whole area of water recycling. This strategy is considering the beneficial use of all waste streams such as domestic sewage, industrial and agricultural wastes, as well as urban stormwater. Following a workshop held during the initial phase of the strategy it was determined that a high priority must be given to the demonstration of recycling practices not being utilised in the State, or presently being practiced in an unsustainable manner. Three separate types of recycling projects are being carried out, the first being based on demonstrating recycling on a large new urban development close to Brisbane, the second associated with demonstrating the complex treatment processes associated with the higher levels of recycling, and the third associated with demonstrating community based recycling schemes.

  1. Optimization of heterogeneous Bin packing using adaptive genetic algorithm

    NASA Astrophysics Data System (ADS)

    Sridhar, R.; Chandrasekaran, M.; Sriramya, C.; Page, Tom

    2017-03-01

    This research is concentrates on a very interesting work, the bin packing using hybrid genetic approach. The optimal and feasible packing of goods for transportation and distribution to various locations by satisfying the practical constraints are the key points in this project work. As the number of boxes for packing can not be predicted in advance and the boxes may not be of same category always. It also involves many practical constraints that are why the optimal packing makes much importance to the industries. This work presents a combinational of heuristic Genetic Algorithm (HGA) for solving Three Dimensional (3D) Single container arbitrary sized rectangular prismatic bin packing optimization problem by considering most of the practical constraints facing in logistic industries. This goal was achieved in this research by optimizing the empty volume inside the container using genetic approach. Feasible packing pattern was achieved by satisfying various practical constraints like box orientation, stack priority, container stability, weight constraint, overlapping constraint, shipment placement constraint. 3D bin packing problem consists of ‘n’ number of boxes being to be packed in to a container of standard dimension in such a way to maximize the volume utilization and in-turn profit. Furthermore, Boxes to be packed may be of arbitrary sizes. The user input data are the number of bins, its size, shape, weight, and constraints if any along with standard container dimension. This user input were stored in the database and encoded to string (chromosomes) format which were normally acceptable by GA. GA operators were allowed to act over these encoded strings for finding the best solution.

  2. Technical challenges in designing post-marketing eCRFs to address clinical safety and pharmacovigilance needs.

    PubMed

    Lu, Zhengwu

    2010-01-01

    To identify key challenges and propose technical considerations in designing electronic case report form (eCRF) for post-marketing studies, the author undertakes a comprehensive literature review of peer reviewed and grey literature to assess the key aspects, processes, standards, recommendations, and best practices in designing eCRFs based on industry experience in designing and supporting electronic data capture (EDC) studies. Literature search using strings on MEDLINE and PUBMED returned few papers directly related to CRF design. Health informatics and general practice journals were searched and results reviewed. Many conference, government commission, health professional and special interests group websites provide relevant information from practical experience - summarization of this information is presented. Further, we presented a list of concrete technical considerations in dealing with EDC technology/system limitations based on literature assessment and industry implementation experience. It is recognized that cross-functional teams be involved in eCRF design process and decision making. To summarize the keys in designing eCRFs to address post-market study safety and pharmacovigilance needs, the first is to identify required data elements from the study protocol supporting data analyses and reporting requirements. Secondly, accepted best practices, CDASH & CDISC guidelines, and company internal or therapeutic unit standard should be considered and applied. Coding (MedDRA & WHODD) mapping should be managed and implemented as well when possible. Finally, we need to be on top of the EDC technologies, challenge the technologies, drive EDC improvement via working with vendors, and utilize the technologies to drive clinical effectiveness. Copyright (c) 2009 Elsevier Inc. All rights reserved.

  3. 16 CFR 1110.5 - Acceptable certificates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

  4. 16 CFR 1110.5 - Acceptable certificates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

  5. 16 CFR 1110.5 - Acceptable certificates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

  6. 16 CFR 1110.5 - Acceptable certificates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

  7. Acceptable Practices in Maintaining Personnel Files.

    ERIC Educational Resources Information Center

    American Association of School Personnel Administrators, Seven Hills, OH.

    Determining acceptable practices in maintaining personnel files is a pertinent issue for school personnel administrators today. Recognizing this, the Georgia Association of School Personnel Administrators accepted the study of this topic as a committee assignment from the American Association of School Personnel Administrators. A survey instrument…

  8. Wise Investment? Modeling Industry Profitability and Risk of Targeted Chemotherapy for Incurable Solid Cancers

    PubMed Central

    Conter, Henry J.; Chu, Quincy S.C.

    2012-01-01

    Purpose: Pharmaceutical development involves substantial financial risk. This risk, rising development costs, and the promotion of continued research and development have been cited as major drivers in the progressive increase in drug prices. Currently, cost-effective analyses are being used to determine the value of treatment. However, cost-effective analyses practically function as a threshold for value and do not directly address the rationale for drug prices. We set out to create a functional model for industry price decisions and clarify the minimum acceptable profitability of new drugs. Methods: Assuming that industry should only invest in profitable ventures, we employed a linear cost-volume-profit breakeven analysis to equate initial capital investment and risk and post–drug-approval profits, where drug development represents the bulk of investment. A Markov decision analysis model was also used to define the relationships between investment events risk. A systematic literature search was performed to determine event probabilities, clinical trial costs, and total expenses as inputs into the model. Disease-specific inputs, current market size across regions, and lengths of treatment for cancer types were also included. Results: With development of single novel chemotherapies costing from $802 to $1,042 million (2002 US dollars), pharmaceutical profits should range from $4.3 to $5.2 billion, with an expected rate of return on investment of 11% annually. However, diversification across cancer types for chemotherapy can reduce the minimum required profit to less than $3 billion. For optimal diversification, industry should study four tumor types per drug; however, nonprofit organizations could tolerate eight parallel development tracks to minimize the risk of development failure. Assuming that pharmaceutical companies hold exclusive rights for drug sales for only 5 years after market approval, the minimum required profit per drug per month per patient ranges from $294 for end-stage lung cancer to $3,231 for end-stage renal cell carcinoma. Conclusion: Pharmaceutical development in oncology is costly, with substantial risk, but is also highly profitable. Minimum acceptable profits per drug per month of treatment per patient vary with prevalence of disease, but they should be less than $5,000 per month of treatment in the developed world. Minimum acceptable profits may be lower for treatments with additional efficacy in the earlier stages of a tumor type. However, this type of event could not be statistically modeled. PMID:29447097

  9. From Vineyard Soil to Wine Fermentation: Microbiome Approximations to Explain the “terroir” Concept

    PubMed Central

    Belda, Ignacio; Zarraonaindia, Iratxe; Perisin, Matthew; Palacios, Antonio; Acedo, Alberto

    2017-01-01

    Wine originally emerged as a serendipitous mix of chemistry and biology, where microorganisms played a decisive role. From these ancient fermentations to the current monitored industrial processes, winegrowers and winemakers have been continuously changing their practices according to scientific knowledge and advances. A new enology direction is emerging and aiming to blend the complexity of spontaneous fermentations with industrial safety of monitored fermentations. In this context, wines with distinctive autochthonous peculiarities have a great acceptance among consumers, causing important economic returns. The concept of terroir, far from being a rural term, conceals a wide range of analytical parameters that are the basis of the knowledge-based enology trend. In this sense, the biological aspect of soils has been underestimated for years, when actually it contains a great microbial diversity. This soil-associated microbiota has been described as determinant, not only for the chemistry and nutritional properties of soils, but also for health, yield, and quality of the grapevine. Additionally, recent works describe the soil microbiome as the reservoir of the grapevine associated microbiota, and as a contributor to the final sensory properties of wines. To understand the crucial roles of microorganisms on the entire wine making process, we must understand their ecological niches, population dynamics, and relationships between ‘microbiome- vine health’ and ‘microbiome-wine metabolome.’ These are critical steps for designing precision enology practices. For that purpose, current metagenomic techniques are expanding from laboratories, to the food industry. This review focuses on the current knowledge about vine and wine microbiomes, with emphasis on their biological roles and the technical basis of next-generation sequencing pipelines. An overview of molecular and informatics tools is included and new directions are proposed, highlighting the importance of –omics technologies in wine research and industry. PMID:28533770

  10. Strategies for restoration of deep-water coral ecosystems based on a global survey of oil and gas regulations

    NASA Astrophysics Data System (ADS)

    Cordes, E. E.; Jones, D.; Levin, L. A.

    2016-02-01

    The oil and gas industry is one of the most active agents of the global industrialization of the deep sea. The wide array of impacts following the Deepwater Horizon oil spill highlighted the need for a systematic review of existing regulations both in US waters and internationally. Within different exclusive economic zones, there are a wide variety of regulations regarding the survey of deep-water areas prior to leasing and the acceptable set-back distances from vulnerable marine ecosystems once they are discovered. There are also varying mitigation strategies for accidental release of oil and gas, including active monitoring systems, temporary closings of oil and gas production, and marine protected areas. The majority of these regulations are based on previous studies of typical impacts from oil and gas drilling, rather than accidental releases. However, the probability of an accident from standard operations increases significantly with depth. The Oil & Gas working group of the Deep Ocean Stewardship Initiative is an international partnership of scientists, managers, non-governmental organizations, and industry professionals whose goal is to review existing regulations for the oil & gas industry and produce a best practices document to advise both developed and developing nations on their regulatory structure as energy development moves into deeper waters.

  11. Traceability in hardness measurements: from the definition to industry

    NASA Astrophysics Data System (ADS)

    Germak, Alessandro; Herrmann, Konrad; Low, Samuel

    2010-04-01

    The measurement of hardness has been and continues to be of significant importance to many of the world's manufacturing industries. Conventional hardness testing is the most commonly used method for acceptance testing and production quality control of metals and metallic products. Instrumented indentation is one of the few techniques available for obtaining various property values for coatings and electronic products in the micrometre and nanometre dimensional scales. For these industries to be successful, it is critical that measurements made by suppliers and customers agree within some practical limits. To help assure this measurement agreement, a traceability chain for hardness measurement traceability from the hardness definition to industry has developed and evolved over the past 100 years, but its development has been complicated. A hardness measurement value not only requires traceability of force, length and time measurements but also requires traceability of the hardness values measured by the hardness machine. These multiple traceability paths are needed because a hardness measurement is affected by other influence parameters that are often difficult to identify, quantify and correct. This paper describes the current situation of hardness measurement traceability that exists for the conventional hardness methods (i.e. Rockwell, Brinell, Vickers and Knoop hardness) and for special-application hardness and indentation methods (i.e. elastomer, dynamic, portables and instrumented indentation).

  12. Aircraft Maintenance Engineering: Factors Impacting Airlines E-Maintenance Technologies, Authoring and Illustrations

    NASA Astrophysics Data System (ADS)

    Karayianes, Frank

    The purpose of this research was to evaluate factors influencing acceptance and use of technologies in the field of aircraft maintenance authoring, graphics, and documentation. Maintenance engineering authors convert complex engineering used in aircraft production and transform that data using technology (tools) into usable technical publications data. While the current literature includes a large volume of research in technology acceptance in various domains of industry and business, the problem is that no such studies exist with respect to the aircraft maintenance engineering authoring, allowing any number of tools to be used and acceptance to be unsure. The study was based on theoretical approaches of the Technology Acceptance Model and the associated hypothesis related to eight research questions. A survey questionnaire was developed for data collection from a selected population of aircraft maintenance engineering authors. Data collected from 148 responses were exposed to a range of statistical methods and analyses. Analysis of data were performed within the structural equation model using exploratory factor analysis, confirmatory factor analysis, and a range of regression methods. The analyses generally provided results consistent with prior literature. Two survey questions yielded unexpected results contrary to similar studies. The relationship between prior experience and job level did not show a significant relationship with perceived usefulness or perceived ease of use. Other results included the significant relationship between Perceived Usefulness and Perceived Ease of Use with Technology acceptance. Recommendations include understanding how Technology Acceptance can be improved for the industry and the need for further research not covered to refine recommendations for technology acceptance related to the aviation industry.

  13. Participation of Colorado pediatricians and family physicians in the Medicaid program.

    PubMed Central

    Berman, S.; Wasserman, S.; Grimm, S.

    1991-01-01

    The Pediatric Health Policy Group of the University of Colorado Health Sciences Center (Denver) surveyed 650 family physicians and 296 pediatricians in 1988, with 50% of family physicians and 48% of pediatricians responding. Half of the pediatricians in private practice and 35% of family physicians in private practice accepted all children who were Medicaid beneficiaries into their practice; 42% of pediatricians and 50% of family physicians accepted all non-Medicaid patients but only some new Medicaid patients; and 8% of pediatricians and 15% of family physicians accepted new non-Medicaid patients but no Medicaid patients. Practice location was associated with the level of Medicaid participation for these primary care physicians: Significantly more rural pediatricians and family physicians than those with urban practices accepted Medicaid patients. The average reimbursement level for these physicians was shown to be an important determinant of whether physicians would accept Medicaid patients. Nonparticipatory physicians were more concerned about excessive paperwork compared with physicians with limited participation. Among physicians with limited participation, family physicians and pediatricians both cited problems of excessive paperwork, reimbursement delays, and retroactive denials of payment as important deterrents to accepting Medicaid patients. PMID:1812643

  14. 16 CFR § 1110.5 - Acceptable certificates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Acceptable certificates. § 1110.5 Section § 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

  15. Shelf-life dating of shelf-stable strawberry juice based on survival analysis of consumer acceptance information.

    PubMed

    Buvé, Carolien; Van Bedts, Tine; Haenen, Annelien; Kebede, Biniam; Braekers, Roel; Hendrickx, Marc; Van Loey, Ann; Grauwet, Tara

    2018-07-01

    Accurate shelf-life dating of food products is crucial for consumers and industries. Therefore, in this study we applied a science-based approach for shelf-life assessment, including accelerated shelf-life testing (ASLT), acceptability testing and the screening of analytical attributes for fast shelf-life predictions. Shelf-stable strawberry juice was selected as a case study. Ambient storage (20 °C) had no effect on the aroma-based acceptance of strawberry juice. The colour-based acceptability decreased during storage under ambient and accelerated (28-42 °C) conditions. The application of survival analysis showed that the colour-based shelf-life was reached in the early stages of storage (≤11 weeks) and that the shelf-life was shortened at higher temperatures. None of the selected attributes (a * and ΔE * value, anthocyanin and ascorbic acid content) is an ideal analytical marker for shelf-life predictions in the investigated temperature range (20-42 °C). Nevertheless, an overall analytical cut-off value over the whole temperature range can be selected. Colour changes of strawberry juice during storage are shelf-life limiting. Combining ASLT with acceptability testing allowed to gain faster insight into the change in colour-based acceptability and to perform shelf-life predictions relying on scientific data. An analytical marker is a convenient tool for shelf-life predictions in the context of ASLT. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  16. Concepts and challenges in quantitative pharmacology and model-based drug development.

    PubMed

    Zhang, Liping; Pfister, Marc; Meibohm, Bernd

    2008-12-01

    Model-based drug development (MBDD) has been recognized as a concept to improve the efficiency of drug development. The acceptance of MBDD from regulatory agencies, industry, and academia has been growing, yet today's drug development practice is still distinctly distant from MBDD. This manuscript is aimed at clarifying the concept of MBDD and proposing practical approaches for implementing MBDD in the pharmaceutical industry. The following concepts are defined and distinguished: PK-PD modeling, exposure-response modeling, pharmacometrics, quantitative pharmacology, and MBDD. MBDD is viewed as a paradigm and a mindset in which models constitute the instruments and aims of drug development efforts. MBDD covers the whole spectrum of the drug development process instead of being limited to a certain type of modeling technique or application area. The implementation of MBDD requires pharmaceutical companies to foster innovation and make changes at three levels: (1) to establish mindsets that are willing to get acquainted with MBDD, (2) to align processes that are adaptive to the requirements of MBDD, and (3) to create a closely collaborating organization in which all members play a role in MBDD. Pharmaceutical companies that are able to embrace the changes MBDD poses will likely be able to improve their success rate in drug development, and the beneficiaries will ultimately be the patients in need.

  17. The meanings and context of smoking among Mexican university students.

    PubMed

    Thrasher, James F; Bentley, Mararet E

    2006-01-01

    We sought to describe the dominant social contexts and meanings of smoking among Mexican university students. Structured observations were made and individual in-depth interviews were conducted with 43 university students who were at five levels of involvement with smoking (i.e., never smoker; ex-smoker; experimenter; regular smoker; frequent smoker). Content analysis of interview transcripts was used to distill the primary settings and themes that students associated with smoking. Outside their homes and away from the purview of their parents, the environments that students frequented were permissive of smoking, supporting their perceptions of smoking behavior, cigarettes, and the tobacco industry as normal and socially acceptable. Cigarette smoking was a highly social practice, with students practicing simultaneous smoking and cigarette sharing to underscore bonds with others. Moreover, the leisure times and places in which students smoked appeared to bolster their perceptions of cigarettes as offering them pleasurable relaxation and escape from boredom and conflictual social relations. All students believed that smoking was addictive and that second-hand smoke was dangerous to non-smokers. The short-term negative outcomes of smoking appeared more salient to students than either the longer-term health outcomes of smoking or the practices of the tobacco industry. The meanings and context of smoking were comparable to those found among youth in other parts of the world. Successful tobacco prevention messages and policies to prevent smoking in other youth populations may also succeed among Mexican youth.

  18. Polish physicians' cooperation with the pharmaceutical industry and its potential impact on public health.

    PubMed

    Makowska, Marta

    2017-01-01

    This article aims to describe how Polish physicians cooperate with the pharmaceutical industry and show how this relationship may pose a threat to public health. It considers the results of an online survey of 379 physicians. The survey was hosted by surveymonkey.com with links from a Polish physicians' website (Medycyna Praktyczna) between 29 October 2013 and 31 December 2013. The sample was purposive, respondents having to be physicians working in Poland. The majority of respondents (96.8%) said that they had talked with pharmaceutical sales representatives (PSRs) in their practice, with 85% saying that they had had regular contact with them. Despite the existing legal ban in Poland, 35% of respondents admitted that they had usually met with PSRs in their office during working hours. As many as 81.8% of surveyed doctors said that they had taken part in an educational meeting organized by the pharmaceutical industry at least once during the 12 months preceding the study. A majority of the respondents (72.3%) said they trusted the information provided by PSRs. Over one third of respondents (36.4%) claimed that Polish doctors accepted gifts of a type that they should not accept according to Polish law. The study showed that Polish physicians cooperate in different ways with pharmaceutical companies and have frequent contact with them. This can influence their knowledge and doctors whose knowledge of drugs is based mainly on information from pharmaceutical industry materials may prescribe medicines in a biased way, possibly exposing their patients to sub-optimal treatments and burdening both their patients and the state budget with unnecessary costs. Lack of trust in doctors and pharmaceutical companies have other implications too: there may be a decline of faith in the efficacy of therapy and patients may be encouraged to engage in self-diagnosis and self-treatment. For these reasons it is necessary to increase transparency and strengthen the ethical guidelines surrounding the physician-pharmaceutical industry relationship in Poland. The present findings also have implications for public health policy.

  19. Polish physicians’ cooperation with the pharmaceutical industry and its potential impact on public health

    PubMed Central

    2017-01-01

    Objective This article aims to describe how Polish physicians cooperate with the pharmaceutical industry and show how this relationship may pose a threat to public health. Methods It considers the results of an online survey of 379 physicians. The survey was hosted by surveymonkey.com with links from a Polish physicians’ website (Medycyna Praktyczna) between 29 October 2013 and 31 December 2013. The sample was purposive, respondents having to be physicians working in Poland. Results The majority of respondents (96.8%) said that they had talked with pharmaceutical sales representatives (PSRs) in their practice, with 85% saying that they had had regular contact with them. Despite the existing legal ban in Poland, 35% of respondents admitted that they had usually met with PSRs in their office during working hours. As many as 81.8% of surveyed doctors said that they had taken part in an educational meeting organized by the pharmaceutical industry at least once during the 12 months preceding the study. A majority of the respondents (72.3%) said they trusted the information provided by PSRs. Over one third of respondents (36.4%) claimed that Polish doctors accepted gifts of a type that they should not accept according to Polish law. Conclusions The study showed that Polish physicians cooperate in different ways with pharmaceutical companies and have frequent contact with them. This can influence their knowledge and doctors whose knowledge of drugs is based mainly on information from pharmaceutical industry materials may prescribe medicines in a biased way, possibly exposing their patients to sub-optimal treatments and burdening both their patients and the state budget with unnecessary costs. Lack of trust in doctors and pharmaceutical companies have other implications too: there may be a decline of faith in the efficacy of therapy and patients may be encouraged to engage in self-diagnosis and self-treatment. For these reasons it is necessary to increase transparency and strengthen the ethical guidelines surrounding the physician–pharmaceutical industry relationship in Poland. The present findings also have implications for public health policy. PMID:28926592

  20. Institutional issues affecting the integration and use of remotely sensed data and geographic information systems

    USGS Publications Warehouse

    Lauer, D.T.; Estes, J.E.; Jensen, J.R.; Greenlee, D.D.

    1991-01-01

    The developers as well as the users of remotely sensed data and geographic information system (GIS) techniques are associated with nearly all types of institutions in government, industry, and academia. Individuals in these various institutions often find the barriers to accepting remote sensing and GIS are not necessarily technical in nature, but can be attributed to the institutions themselves. Several major institutional issues that affect the technologies of remote sensing and GIS are data availability, data marketing and costs, equipment availability and costs, standards and practices, education and training, and organizational infrastructures. Not only are problems associated with these issues identified, but needs and opportunities also are discussed. -from Authors

  1. Establishing best practise in the application of expert review of mutagenicity under ICH M7.

    PubMed

    Barber, Chris; Amberg, Alexander; Custer, Laura; Dobo, Krista L; Glowienke, Susanne; Van Gompel, Jacky; Gutsell, Steve; Harvey, Jim; Honma, Masamitsu; Kenyon, Michelle O; Kruhlak, Naomi; Muster, Wolfgang; Stavitskaya, Lidiya; Teasdale, Andrew; Vessey, Jonathan; Wichard, Joerg

    2015-10-01

    The ICH M7 guidelines for the assessment and control of DNA reactive (mutagenic) impurities in pharmaceuticals allows for the consideration of in silico predictions in place of in vitro studies. This represents a significant advance in the acceptance of (Q)SAR models and has resulted from positive interactions between modellers, regulatory agencies and industry with a shared purpose of developing effective processes to minimise risk. This paper discusses key scientific principles that should be applied when evaluating in silico predictions with a focus on accuracy and scientific rigour that will support a consistent and practical route to regulatory submission. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. Should radiology IT be owned by the chief information officer?

    PubMed

    Channin, David S; Bowers, George; Nagy, Paul

    2009-06-01

    Considerable debate within the medical community has focused on the optimal location of information technology (IT) support groups on the organizational chart. The challenge has been to marry local accountability and physician acceptance of IT with the benefits gained by the economies of scale achieved by centralized knowledge and system best practices. In the picture archiving and communication systems (PACS) industry, a slight shift has recently occurred toward centralized control. Radiology departments, however, have begun to realize that no physicians in any other discipline are as dependent on IT as radiologists are on their PACS. The potential strengths and weaknesses of centralized control of the PACS is the topic of discussion for this month's Point/Counterpoint.

  3. Factors influencing residents' acceptance (support) of remediation technologies.

    PubMed

    Prior, Jason

    2018-05-15

    An increasing diversity of technologies are being used to remediate contaminated sites, yet there remains little understanding of the level of acceptance that residents living near these sites hold for these technologies, and what factors influence their level of acceptance. This lack of understanding hinders the remediation industry's ability to effectively engage with these residents about remediation technology selection, at a time when such engagement is become part and parcel of remediation policy and practice. The study develops on wider research into public acceptance of technologies, using data from a telephone survey of 2009 residents living near thirteen contaminated sites across Australia. Within the survey acceptance is measured through residents' level of support for the application of remediation technologies in their local area. Firstly, a regression analysis of closed-ended questions, and coding of open-ended questions are combined to identify the main predictors of residents' support for remediation technologies. Secondly, coding of open-ended questions was analysed using Crawford and Ostrom's Institutional Grammar Tool to identify norms and sanctions guiding residents' willingness to negotiate their support. The research identifies factors associated with the residents' personal and demographic characteristics, their physical context and engagement with institution during remediation processes, and the technologies themselves which predict residents' level of support for the application of remediation technologies. Bioremediation technologies had higher levels of support than chemical, thermal and physical technologies. Furthermore, the paper identifies a core set of norms and sanctions residents use to negotiate their level of support for remediation technologies. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Practicing Research Ethics: Private-Sector Physicians & Pharmaceutical Clinical Trials

    PubMed Central

    2008-01-01

    This paper focuses on constructions of research ethics by primary care physicians in the USA as they engage in contract research for the pharmaceutical industry. Drawing first upon historical studies of physicians as investigators and then upon 12 months of qualitative fieldwork in the South Western US, this paper analyzes the shifting, contextualized ethics that shape physicians’ relationships with patients/subjects and pharmaceutical companies. Just as physicians followed professional codes of ethics prior to the codification of acceptable research conduct in the 1980s, physicians today continue to develop tacit systems of research ethics. This paper argues that private-sector physicians primarily conceptualize their ethical conduct in relation to the pharmaceutical companies hiring them, not to human subjects they enroll in clinical trials. This is not to say that these physicians do not follow the formal U.S. regulation to protect human subjects, but rather that their financial relationships with the pharmaceutical industry have a greater influence on their identities as researchers and on their constructions of their ethical responsibilities. PMID:18353515

  5. Practicing research ethics: private-sector physicians & pharmaceutical clinical trials.

    PubMed

    Fisher, Jill A

    2008-06-01

    This paper focuses on constructions of research ethics by primary care physicians in the USA as they engage in contract research for the pharmaceutical industry. Drawing first on historical studies of physicians as investigators and then on 12 months of qualitative fieldwork in the Southwestern US, this paper analyzes the shifting, contextualized ethics that shape physicians' relationships with patients/subjects and pharmaceutical companies. Just as physicians followed professional codes of ethics prior to the codification of acceptable research conduct in the 1980s, physicians today continue to develop tacit systems of research ethics. This paper argues that private-sector physicians primarily conceptualize their ethical conduct in relation to the pharmaceutical companies hiring them, not to human subjects they enroll in clinical trials. This is not to say that these physicians do not follow the formal U.S. regulation to protect human subjects, but rather that their financial relationships with the pharmaceutical industry have a greater influence on their identities as researchers and on their constructions of their ethical responsibilities.

  6. Knowledge Sharing and Educational Technology Acceptance in Online Academic Communities of Practice

    ERIC Educational Resources Information Center

    Nistor, Nicolae; Baltes, Beate; Schustek, Monika

    2012-01-01

    Purpose: Online programs rely on the use of educational technology for knowledge sharing in academic virtual communities of practice (vCoPs). This poses the question as to which factors influence technology acceptance. Previous research has investigated the inter-relationship between educational technology acceptance (ETA) and the vCoP context…

  7. LIMS user acceptance testing.

    PubMed

    Klein, Corbett S

    2003-01-01

    Laboratory Information Management Systems (LIMS) play a key role in the pharmaceutical industry. Thorough and accurate validation of such systems is critical and is a regulatory requirement. LIMS user acceptance testing is one aspect of this testing and enables the user to make a decision to accept or reject implementation of the system. This paper discusses key elements in facilitating the development and execution of a LIMS User Acceptance Test Plan (UATP).

  8. Industrial hygiene evaluation of thermal degradation products from PVC film in meat-wrapping operations.

    PubMed

    Cook, W A

    1980-07-01

    An industrial hygiene evaluation is presented concerning experimental data included in the preceding paper on thermal degradation products from hot-wire and "cool"-rod cutting of PVC film but, in this paper, limited to film used in meat-wrapping operations. Room air concentrations of less than 0.2 ppm HCl and less than 0.05 ppm benzene can be maintained by a number of factors, including minimal dilution ventilation. Estimates of room air concentrations of degradation products are presented using average values of amounts produced per cut. The relation of these concentrations to TLV's is given, together with methods of suggesting TLV's for substances not listed by ACGIH or OSHA. Room air concentrations for the 12 degradation products for which TLV's are assigned, based on average values per cut, were no greater than 0.3% of accepted limits. Room air concentrations of DOA are not determinable from available data but present information does not indicate that exposure to DOA causes airway hyperreactivity. The cool rod, rather than the hot wire, is recommended as good industrial hygiene practice, producing no apparent PVC degradation products, even though similar amounts of DOA are volatilized.

  9. Conceptual Ecology of the Evolution Acceptance among Greek Education Students: Knowledge, religious practices and social influences

    NASA Astrophysics Data System (ADS)

    Athanasiou, Kyriacos; Papadopoulou, Penelope

    2012-04-01

    In this study, we explored some of the factors related to the acceptance of evolution theory among Greek university students training to be teachers in early childhood education, using conceptual ecology for biological evolution as a theoretical framework. We examined the acceptance of evolution theory and we also looked into the relationship between the acceptance and parents' education level, thinking dispositions and frequency of religious practice as independent variables. Students' moderate acceptance of evolution theory is positively correlated with the frequency of religious practices and thinking dispositions. Our findings indicate that studying a controversial issue such as the acceptance of evolution theory in a multivariate fashion, using conceptual ecology as a theoretical lens to interpret the findings, is informative. They also indicate the differences that exist between societies and how socio-cultural factors such as the nature of religion, as part of the conceptual ecology, influence acceptance of evolution and have an influence on evolution education.

  10. 33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730. ...

  11. 33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730. ...

  12. Advances in participatory occupational health aimed at good practices in small enterprises and the informal sector.

    PubMed

    Kogi, Kazutaka

    2006-01-01

    Participatory programmes for occupational risk reduction are gaining importance particularly in small workplaces in both industrially developing and developed countries. To discuss the types of effective support, participatory steps commonly seen in our "work improvement-Asia" network are reviewed. The review covered training programmes for small enterprises, farmers, home workers and trade union members. Participatory steps commonly focusing on low-cost good practices locally achieved have led to concrete improvements in multiple technical areas including materials handling, workstation ergonomics, physical environment and work organization. These steps take advantage of positive features of small workplaces in two distinct ways. First, local key persons are ready to accept local good practices conveyed through personal, informal approaches. Second, workers and farmers are capable of understanding technical problems affecting routine work and taking flexible actions leading to solving them. This process is facilitated by the use of locally adjusted training tools such as local good examples, action checklists and group work methods. It is suggested that participatory occupational health programmes can work in small workplaces when they utilize low-cost good practices in a flexible manner. Networking of these positive experiences is essential.

  13. Leading the Charge in Changing Times: 21st Century Learning and Leading

    ERIC Educational Resources Information Center

    Jones, Amanda Criswell

    2016-01-01

    Throughout history educational practices have typically been modeled after economic work practices. During the agrarian-age, educational practices modeled agrarian practices. Likewise, in the industrial-age, education became standardized and was modeled after industrial practices to prepare students for work in factories and industrial settings.…

  14. Soft Regulation with Crowd Recommendation: Coordinating Self-Interested Agents in Sociotechnical Systems under Imperfect Information.

    PubMed

    Luo, Yu; Iyengar, Garud; Venkatasubramanian, Venkat

    2016-01-01

    Regulating emerging industries is challenging, even controversial at times. Under-regulation can result in safety threats to plant personnel, surrounding communities, and the environment. Over-regulation may hinder innovation, progress, and economic growth. Since one typically has limited understanding of, and experience with, the novel technology in practice, it is difficult to accomplish a properly balanced regulation. In this work, we propose a control and coordination policy called soft regulation that attempts to strike the right balance and create a collective learning environment. In soft regulation mechanism, individual agents can accept, reject, or partially accept the regulator's recommendation. This non-intrusive coordination does not interrupt normal operations. The extent to which an agent accepts the recommendation is mediated by a confidence level (from 0 to 100%). Among all possible recommendation methods, we investigate two in particular: the best recommendation wherein the regulator is completely informed and the crowd recommendation wherein the regulator collects the crowd's average and recommends that value. We show by analysis and simulations that soft regulation with crowd recommendation performs well. It converges to optimum, and is as good as the best recommendation for a wide range of confidence levels. This work sheds a new theoretical perspective on the concept of the wisdom of crowds.

  15. Soft Regulation with Crowd Recommendation: Coordinating Self-Interested Agents in Sociotechnical Systems under Imperfect Information

    PubMed Central

    2016-01-01

    Regulating emerging industries is challenging, even controversial at times. Under-regulation can result in safety threats to plant personnel, surrounding communities, and the environment. Over-regulation may hinder innovation, progress, and economic growth. Since one typically has limited understanding of, and experience with, the novel technology in practice, it is difficult to accomplish a properly balanced regulation. In this work, we propose a control and coordination policy called soft regulation that attempts to strike the right balance and create a collective learning environment. In soft regulation mechanism, individual agents can accept, reject, or partially accept the regulator’s recommendation. This non-intrusive coordination does not interrupt normal operations. The extent to which an agent accepts the recommendation is mediated by a confidence level (from 0 to 100%). Among all possible recommendation methods, we investigate two in particular: the best recommendation wherein the regulator is completely informed and the crowd recommendation wherein the regulator collects the crowd’s average and recommends that value. We show by analysis and simulations that soft regulation with crowd recommendation performs well. It converges to optimum, and is as good as the best recommendation for a wide range of confidence levels. This work sheds a new theoretical perspective on the concept of the wisdom of crowds. PMID:26977699

  16. 77 FR 20452 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-04

    ... of Acceptance, Waiver and Consent No. EAF0401000001 (MML Distributors, LLC) (Oct. 2005); NASD Letter of Acceptance, Waiver and Consent No. EAF0401240001 (AFSG Securities Corp.) (Oct. 2005); FINRA Letter...

  17. Dengue vaccine acceptance and associated factors in Indonesia: A community-based cross-sectional survey in Aceh.

    PubMed

    Harapan, Harapan; Anwar, Samsul; Setiawan, Abdul Malik; Sasmono, R Tedjo

    2016-07-12

    The first dengue vaccine (DV) has been licensed in some countries, but an assessment of the public's acceptance of DV is widely lacking. This study aimed to explore and understand DV acceptance and its associated explanatory variables among healthy inhabitants of Aceh, Indonesia. A community-based cross-sectional survey was conducted from November 2014 to March 2015 in nine regencies of Aceh that were selected randomly. A set of validated questionnaires covering a range of explanatory variables and DV acceptance was used to conduct the interviews. A multi-step logistic regression analysis and Spearman's rank correlation were employed to assess the role of explanatory variables in DV acceptance. We included 652 community members in the final analysis and found that 77.3% of them were willing to accept the DV. Gender, monthly income, socioeconomic status (SES), attitude toward dengue fever (DF) and attitude toward vaccination practice were associated with DV acceptance in bivariate analyses (P<0.05). A correlation analysis confirmed that attitude toward vaccination practice and attitude toward DF were strongly correlated with DV acceptance, rs=0.41 and rs=0.39, respectively (P<0.001). The multivariate analysis revealed that a high monthly income, high SES, and a good attitude toward vaccination practice and toward DF were independent predictors of DV acceptance. The acceptance rate of the DV among inhabitants of Aceh, Indonesia was relatively high, and the strongest associated factors of higher support for the DV were a good attitude toward vaccination practices and a good attitude toward DF. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Evaluation of rail test frequencies using risk analysis

    DOT National Transportation Integrated Search

    2009-03-03

    Several industries now use risk analysis to develop : inspection programs to ensure acceptable mechanical integrity : and reliability. These industries include nuclear and electric : power generation, oil refining, gas processing, onshore and : offsh...

  19. Knowledge, Beliefs and Attitudes of Patients and the General Public towards the Interactions of Physicians with the Pharmaceutical and the Device Industry: A Systematic Review.

    PubMed

    Fadlallah, Racha; Nas, Hala; Naamani, Dana; El-Jardali, Fadi; Hammoura, Ihsan; Al-Khaled, Lina; Brax, Hneine; Kahale, Lara; Akl, Elie A

    2016-01-01

    To systematically review the evidence on the knowledge, beliefs, and attitudes of patients and the general public towards the interactions of physicians with the pharmaceutical and the device industry. We included quantitative and qualitative studies addressing any type of interactions between physicians and the industry. We searched MEDLINE and EMBASE in August 2015. Two reviewers independently completed data selection, data extraction and assessment of methodological features. We summarized the findings narratively stratified by type of interaction, outcome and country. Of the 11,902 identified citations, 20 studies met the eligibility criteria. Many studies failed to meet safeguards for protecting from bias. In studies focusing on physicians and the pharmaceutical industry, the percentages of participants reporting awareness was higher for office-use gifts relative to personal gifts. Also, participants were more accepting of educational and office-use gifts compared to personal gifts. The findings were heterogeneous for the perceived effects of physician-industry interactions on prescribing behavior, quality and cost of care. Generally, participants supported physicians' disclosure of interactions through easy-to-read printed documents and verbally. In studies focusing on surgeons and device manufacturers, the majority of patients felt their care would improve or not be affected if surgeons interacted with the device industry. Also, they felt surgeons would make the best choices for their health, regardless of financial relationship with the industry. Participants generally supported regulation of surgeon-industry interactions, preferably through professional rather than governmental bodies. The awareness of participants was low for physicians' receipt of personal gifts. Participants also reported greater acceptability and fewer perceived influence for office-use gifts compared to personal gifts. Overall, there appears to be lower awareness, less concern and more acceptance of surgeon-device industry interactions relative to physician-pharmaceutical industry interactions. We discuss the implications of the findings at the patient, provider, organizational, and systems level.

  20. Knowledge, Beliefs and Attitudes of Patients and the General Public towards the Interactions of Physicians with the Pharmaceutical and the Device Industry: A Systematic Review

    PubMed Central

    Fadlallah, Racha; Nas, Hala; Naamani, Dana; El-Jardali, Fadi; Hammoura, Ihsan; Al-Khaled, Lina; Brax, Hneine; Kahale, Lara; Akl, Elie A.

    2016-01-01

    Objective To systematically review the evidence on the knowledge, beliefs, and attitudes of patients and the general public towards the interactions of physicians with the pharmaceutical and the device industry. Methods We included quantitative and qualitative studies addressing any type of interactions between physicians and the industry. We searched MEDLINE and EMBASE in August 2015. Two reviewers independently completed data selection, data extraction and assessment of methodological features. We summarized the findings narratively stratified by type of interaction, outcome and country. Results Of the 11,902 identified citations, 20 studies met the eligibility criteria. Many studies failed to meet safeguards for protecting from bias. In studies focusing on physicians and the pharmaceutical industry, the percentages of participants reporting awareness was higher for office-use gifts relative to personal gifts. Also, participants were more accepting of educational and office-use gifts compared to personal gifts. The findings were heterogeneous for the perceived effects of physician-industry interactions on prescribing behavior, quality and cost of care. Generally, participants supported physicians’ disclosure of interactions through easy-to-read printed documents and verbally. In studies focusing on surgeons and device manufacturers, the majority of patients felt their care would improve or not be affected if surgeons interacted with the device industry. Also, they felt surgeons would make the best choices for their health, regardless of financial relationship with the industry. Participants generally supported regulation of surgeon-industry interactions, preferably through professional rather than governmental bodies. Conclusion The awareness of participants was low for physicians’ receipt of personal gifts. Participants also reported greater acceptability and fewer perceived influence for office-use gifts compared to personal gifts. Overall, there appears to be lower awareness, less concern and more acceptance of surgeon-device industry interactions relative to physician-pharmaceutical industry interactions. We discuss the implications of the findings at the patient, provider, organizational, and systems level. PMID:27556929

  1. Conceptualisation of the characteristics of advanced practitioners in the medical radiation professions.

    PubMed

    Smith, Tony; Harris, Jillian; Woznitza, Nick; Maresse, Sharon; Sale, Charlotte

    2015-09-01

    Professions grapple with defining advanced practice and the characteristics of advanced practitioners. In nursing and allied health, advanced practice has been defined as 'a state of professional maturity in which the individual demonstrates a level of integrated knowledge, skill and competence that challenges the accepted boundaries of practice and pioneers new developments in health care'. Evolution of advanced practice in Australia has been slower than in the United Kingdom, mainly due to differences in demography, the health system and industrial relations. This article describes a conceptual model of advanced practitioner characteristics in the medical radiation professions, taking into account experiences in other countries and professions. Using the CanMEDS framework, the model includes foundation characteristics of communication, collaboration and professionalism, which are fundamental to advanced clinical practice. Gateway characteristics are: clinical expertise, with high level competency in a particular area of clinical practice; scholarship and teaching, including a masters qualification and knowledge dissemination through educating others; and evidence-based practice, with judgements made on the basis of research findings, including research by the advanced practitioner. The pinnacle of advanced practice is clinical leadership, where the practitioner has a central role in the health care team, with the capacity to influence decision making and advocate for others, including patients. The proposed conceptual model is robust yet adaptable in defining generic characteristics of advanced practitioners, no matter their clinical specialty. The advanced practice roles that evolve to meet future health service demand must focus on the needs of patients, local populations and communities.

  2. Psychophysically determined forces of dynamic pushing for female industrial workers: Comparison of two apparatuses.

    PubMed

    Ciriello, Vincent M; Maikala, Rammohan V; Dempsey, Patrick G; O'Brien, Niall V

    2010-01-01

    Using psychophysics, the maximum acceptable forces for pushing have been previously developed using a magnetic particle brake (MPB) treadmill at the Liberty Mutual Research Institute for Safety. The objective of this study was to investigate the reproducibility of maximum acceptable initial and sustained forces while performing a pushing task at a frequency of 1min(-1) both on a MPB treadmill and on a high-inertia pushcart. This is important because our pushing guidelines are used extensively as a ergonomic redesign strategy and we would like the information to be as applicable as possible to cart pushing. On two separate days, nineteen female industrial workers performed a 40-min MPB treadmill pushing task and a 2-hr pushcart task, in the context of a larger experiment. During pushing, the subjects were asked to select a workload they could sustain for 8h without "straining themselves or without becoming unusually tired, weakened, overheated or out of breath." The results demonstrated that maximum acceptable initial and sustained forces of pushing determined on the high inertia pushcart were 0.8% and 2.5% lower than the MPB treadmill. The results also show that the maximum acceptable sustained force of the MPB treadmill task was 0.5% higher than the maximum acceptable sustained force of Snook and Ciriello (1991). Overall, the findings confirm that the existing pushing data developed by the Liberty Mutual Research Institute for Safety still provides an accurate estimate of maximal acceptable forces for the selected combination of distance and frequency of push for female industrial workers.

  3. Support amongst UK pig farmers and agricultural stakeholders for the use of food losses in animal feed

    PubMed Central

    Kelly, Moira; Bladon, Eleanor; Salemdeeb, Ramy; Balmford, Andrew

    2018-01-01

    While food losses (foods which were intended for human consumption, but which ultimately are not directly eaten by people) have been included in animal feed for millennia, the practice is all but banned in the European Union. Amid recent calls to promote a circular economy, we conducted a survey of pig farmers (n = 82) and other agricultural stakeholders (n = 81) at a UK agricultural trade fair on their attitudes toward the use of food losses in pig feed, and the potential relegalisation of swill (the use of cooked food losses as feed). While most respondents found the use of feeds containing animal by-products or with the potential for intra-species recycling (i.e. pigs eating pork products) to be less acceptable than feeds without, we found strong support (>75%) for the relegalisation of swill among both pig farmers and other stakeholders. We fit multi-hierarchical Bayesian models to understand people’s position on the relegalisation of swill, finding that respondents who were concerned about disease control and the perception of the pork industry supported relegalisation less, while people who were concerned with farm financial performance and efficiency or who thought that swill would benefit the environment and reduce trade-deficits, were more supportive. Our results provide a baseline estimate of support amongst the large-scale pig industry for the relegalisation of swill, and suggest that proponents for its relegalisation must address concerns about disease control and the consumer acceptance of swill-fed pork. PMID:29689078

  4. Support amongst UK pig farmers and agricultural stakeholders for the use of food losses in animal feed.

    PubMed

    Zu Ermgassen, Erasmus K H J; Kelly, Moira; Bladon, Eleanor; Salemdeeb, Ramy; Balmford, Andrew

    2018-01-01

    While food losses (foods which were intended for human consumption, but which ultimately are not directly eaten by people) have been included in animal feed for millennia, the practice is all but banned in the European Union. Amid recent calls to promote a circular economy, we conducted a survey of pig farmers (n = 82) and other agricultural stakeholders (n = 81) at a UK agricultural trade fair on their attitudes toward the use of food losses in pig feed, and the potential relegalisation of swill (the use of cooked food losses as feed). While most respondents found the use of feeds containing animal by-products or with the potential for intra-species recycling (i.e. pigs eating pork products) to be less acceptable than feeds without, we found strong support (>75%) for the relegalisation of swill among both pig farmers and other stakeholders. We fit multi-hierarchical Bayesian models to understand people's position on the relegalisation of swill, finding that respondents who were concerned about disease control and the perception of the pork industry supported relegalisation less, while people who were concerned with farm financial performance and efficiency or who thought that swill would benefit the environment and reduce trade-deficits, were more supportive. Our results provide a baseline estimate of support amongst the large-scale pig industry for the relegalisation of swill, and suggest that proponents for its relegalisation must address concerns about disease control and the consumer acceptance of swill-fed pork.

  5. Full Employment in Industrialized Countries.

    ERIC Educational Resources Information Center

    Britton, Andrew

    1997-01-01

    Argues that full employment must be acceptable on both social and economic grounds. Examines profound changes in industrialized economies since the 1970s and the diversity of employment contracts. Suggests that difficult policy decisions surround full employment. (SK)

  6. 78 FR 101 - Guidance for Industry and Food and Drug Administration Staff; Acceptance and Filing Reviews for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-02

    ... element(s). In order to enhance the consistency of our acceptance and filing decisions and to help..., thereby assuring the consistency of our acceptance and filing decisions. This guidance is applicable to... issues that need to be addressed in a PMA and the key decisions to be made during the filing process. The...

  7. Effect of beef tenderness on consumer satisfaction with steaks consumed in the home and restaurant.

    PubMed

    Huffman, K L; Miller, M F; Hoover, L C; Wu, C K; Brittin, H C; Ramsey, C B

    1996-01-01

    Loin steaks were eaten by 67 consumers over a 15-wk period (n = 739 consumer observations) to determine the consumer acceptability of beef tenderness in the home and a "white table cloth" restaurant. Steaks were rated for tenderness, juiciness, flavor, and overall palatability on an 8-point scale. The acceptability levels for tenderness were established based on Warner-Bratzler shear (WBS) force values, tenderness ratings, and a chisquare analysis of the judgment of tenderness and overall acceptability by the same consumers in both the home and restaurant. Results based only on observations from consumers in Lubbock, TX indicated that the beef industry should target production of beef steaks that have a Warner-Bratzler shear force value of 4.1 kg or less to ensure high levels (98%) of consumer acceptability. Results suggest that an acceptable level of beef tenderness for consumers can be determined and WBS values can be used as criteria for determining which steaks will be considered acceptably tender to consumers before distribution to retail outlets. The beef industry needs to conduct a nationwide research study to determine whether the results from this study will apply to all U.S. beef consumers.

  8. Using tobacco-industry marketing research to design more effective tobacco-control campaigns.

    PubMed

    Ling, Pamela M; Glantz, Stanton A

    2002-06-12

    To improve tobacco-control efforts by applying tobacco-industry marketing research and strategies to clinical and public health smoking interventions, we analyzed previously secret tobacco-industry marketing documents. In contrast to public health, the tobacco industry divides markets and defines targets according to consumer attitudes, aspirations, activities, and lifestyles. Tobacco marketing targets smokers of all ages; young adults are particularly important. During the 1980s, cost affected increasing numbers of young and older smokers. During the 1990s, eroding social acceptability of smoking emerged as a major threat, largely from increasing awareness of the dangers of secondhand smoke among nonsmokers and smokers. Physicians and public health professionals should use tobacco-industry psychographic approaches to design more relevant tobacco-control interventions. Efforts to counter tobacco marketing campaigns should include people of all ages, particularly young adults, rather than concentrating on teens and young children. Many young smokers are cost sensitive. Tobacco-control messages emphasizing the dangers of secondhand smoke to smokers and nonsmokers undermine the social acceptability of smoking.

  9. Baby Factories in Nigeria: Starting the Discussion Toward a National Prevention Policy.

    PubMed

    Makinde, Olusesan Ayodeji; Olaleye, Olalekan; Makinde, Olufunmbi Olukemi; Huntley, Svetlana S; Brown, Brandon

    2017-01-01

    Baby factories and baby harvesting are relatively new terms that involve breeding, trafficking, and abuse of infants and their biological mothers. Since it was first described in a United Nations Educational, Scientific and Cultural Organization report in Nigeria in 2006, several more baby factories have been discovered over the years. Infertile women are noted to be major patrons of these baby factories due to the stigmatization of childless couples in Southern Nigeria and issues around cultural acceptability of surrogacy and adoption. These practices have contributed to the growth in the industry which results in physical, psychological, and sexual violence to the victims. Tackling baby factories will involve a multifaceted approach that includes advocacy and enacting of legislation barring baby factories and infant trafficking and harsh consequences for their patrons. Also, programs to educate young girls on preventing unwanted pregnancies are needed. Methods of improving awareness and acceptability of adoption and surrogacy and reducing the administrative and legal bottlenecks associated with these options for infertile couples should be explored to diminish the importance of baby factories. © The Author(s) 2015.

  10. Two Cultures in Modern Science and Technology: For Safety and Validity Does Medicine Have to Update?

    PubMed

    Becker, Robert E

    2016-01-11

    Two different scientific cultures go unreconciled in modern medicine. Each culture accepts that scientific knowledge and technologies are vulnerable to and easily invalidated by methods and conditions of acquisition, interpretation, and application. How these vulnerabilities are addressed separates the 2 cultures and potentially explains medicine's difficulties eradicating errors. A traditional culture, dominant in medicine, leaves error control in the hands of individual and group investigators and practitioners. A competing modern scientific culture accepts errors as inevitable, pernicious, and pervasive sources of adverse events throughout medical research and patient care too malignant for individuals or groups to control. Error risks to the validity of scientific knowledge and safety in patient care require systemwide programming able to support a culture in medicine grounded in tested, continually updated, widely promulgated, and uniformly implemented standards of practice for research and patient care. Experiences from successes in other sciences and industries strongly support the need for leadership from the Institute of Medicine's recommended Center for Patient Safely within the Federal Executive branch of government.

  11. The Evaluation of Industry Practical of Mechanical Engineering in Vocational Education: A CIPP Model Approach

    NASA Astrophysics Data System (ADS)

    Kamaludin, M.; Munawar, W.; Mahdan, D.; Simanjuntak, M. V.; Wendi, H. F.

    2018-02-01

    The learning system is not only studied on campus but also practicing in the world of work. Industry Practical aims to enable students to develop their skills in accordance with the real world of work. To know the success of the implementation of industry practical program then held evaluation. The evaluation of the program in this study used the CIPP evaluation approach (Context, Input, Process, Product). The purpose of this research is to know the extent of achievement and success of industry practical program at vocational school in Bandung with descriptive research method using mix method approach. The sample in this research is students majoring in mechanical engineering in the city of Bandung who have done industry practical.

  12. 33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730 of this part. [USCG-1998-3884, 71 FR 57651, Sept. 29, 2006, as...

  13. 33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730 of this part. [USCG-1998-3884, 71 FR 57651, Sept. 29, 2006, as...

  14. The persuasive appeal of alternative medicine.

    PubMed

    Kaptchuk, T J; Eisenberg, D M

    1998-12-15

    Alternative medicine has a major presence and persuasive attraction in the industrialized western world. The extent to which these practices have clinical efficacy according to biomedical criteria is a matter of ongoing research and debate. It may be that independent of any such efficacy, the attraction of alternative medicine is related to the power of its underlying shared beliefs and cultural assumptions. The fundamental premises are an advocacy of nature, vitalism, "science," and spirituality. These themes offer patients a participatory experience of empowerment, authenticity, and enlarged self-identity when illness threatens their sense of intactness and connection to the world. A discussion of these themes may enable conventionally trained clinicians to better understand their patients' attraction to and acceptance of alternative medical therapies.

  15. ROMI-RIP: Rough mill rip-first simulator. Forest Service general technical report (Final)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thomas, R.E.

    1995-07-01

    The ROugh Mill Rip-First Simulator (ROMI-RIP) is a computer software package that simulates the gang-ripping of lumber. ROMI-RIP was designed to closely simulate current machines and industrial practice. This simulator allows the user to perform `what if` analyses on various gang-rip-first rough mill operations with fixed, floating outer blade and all-movable blade arbors. ROMI-RIP accepts cutting bills with up to 300 different part sizes. Plots of processed boards are easily viewed or printed. Detailed summaries of processing steps (number of rips and crosscuts) and yields (single boards or entire board files) can also be viewed of printed. ROMI-RIP requires IBMmore » personal computers with 80286 of higher processors.« less

  16. Decision-making styles of business and industry: Five insights to improving your sales success

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bramson, R.M.

    1996-04-01

    Corporations, like people, have styles-even personalities-that in varied but vital ways affect every decision made at every level in the organization. This report describes five key organizational styles, methods for assessing which style a utility sales representative might encounter, and practical strategies that increase the odds of proposal acceptance. Each style is defined by its (1) goals and priorities, (2) administrative/communicative network, (3) key players, (4) events or circumstances prompting decisions, and (5) typical decision barriers, biases, and selling points. Written in highly readable style, this report provides tools that will help utility representatives proactively overcome organizational sales barriers, shortenmore » selling cycles, reduce sales expense, increase revenue and enhance customer loyalty.« less

  17. 17 CFR Appendix B to Part 38 - Guidance on, and Acceptable Practices in, Compliance With Core Principles

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Practices in, Compliance With Core Principles B Appendix B to Part 38 Commodity and Securities Exchanges...—Guidance on, and Acceptable Practices in, Compliance With Core Principles 1. This appendix provides guidance on complying with the core principles, both initially and on an ongoing basis, to maintain...

  18. FUNGIBLE AND COMPATIBLE BIOFUELS: LITERATURE SEARCH, SUMMARY, AND RECOMMENDATIONS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bunting, Bruce G; Bunce, Michael; Barone, Teresa L

    2011-04-01

    The purpose of the study described in this report is to summarize the various barriers to more widespread distribution of bio-fuels through our common carrier fuel distribution system, which includes pipelines, barges and rail, fuel tankage, and distribution terminals. Addressing these barriers is necessary to allow the more widespread utilization and distribution of bio-fuels, in support of a renewable fuels standard and possible future low-carbon fuel standards. These barriers can be classified into several categories, including operating practice, regulatory, technical, and acceptability barriers. Possible solutions to these issues are discussed; including compatibility evaluation, changes to bio-fuels, regulatory changes, and changesmore » in the distribution system or distribution practices. No actual experimental research has been conducted in the writing of this report, but results are used to develop recommendations for future research and additional study as appropriate. This project addresses recognized barriers to the wider use of bio-fuels in the areas of development of codes and standards, industrial and consumer awareness, and materials compatibility issues.« less

  19. Boar taint compound levels in back fat versus meat products: Do they correlate?

    PubMed

    Wauters, Jella; Vercruysse, Vicky; Aluwé, Marijke; Verplanken, Kaat; Vanhaecke, Lynn

    2016-09-01

    Surgical castration of male pigs will soon be abandoned, turning a major advantage of this practice, the elimination of boar taint, into the biggest challenge for pig industry when raising intact male pigs becomes common practice. To map the (economical) consequences in relation to boar-taint consumer acceptance, as well as offer a processing strategy for tainted carcasses to stockholders, the current study investigated not only back fat boar taint levels, but additionally generated information on the levels of boar taint compounds recovered after the production of commercially relevant meat products using UHPLC-HRMS laboratory analysis. Our results demonstrate that levels of androstenone, skatole and indole in back fat and meat products tend to correlate strongly, particularly in fatty meat products (generally r>0.80). Concentration values in the edible (lean) meat fraction were significantly lower compared to back fat and fat sampled from fresh or processed meat (p<0.05). Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Guidelines for project-level traffic forecasting for Hawaii Department of Transportation.

    DOT National Transportation Integrated Search

    2015-12-01

    These guidelines describe both best practice and acceptable practice for performing project-level traffic : forecasts for the State of Hawaii. The guidelines describe a number of techniques and options that are all : acceptable within their intended ...

  1. Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile Industry

    NASA Astrophysics Data System (ADS)

    Luthra, S.; Garg, D.; Haleem, A.

    2014-04-01

    Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.

  2. Time to finger point or fix? An invitation to join ongoing efforts to promote ethical authorship and other good publication practices.

    PubMed

    Woolley, Karen L; Gertel, Art; Hamilton, Cindy W; Jacobs, Adam; Snyder, Gene P

    2013-01-01

    In this commentary, we present evidence that unethical authorship (eg, guest and ghost authoring) and other publication practices are not restricted to the pharmaceutical industry; they also occur in academia. Such practices are not an industry problem--they are a research problem. To enhance trust in industry-sponsored research, companies have made rapid and far-reaching changes to their publication guidelines, policies, and procedures. Professional medical writers have adopted, and continue to implement, these changes. Although evidence indicates that industry practices are improving, there is certainly more to do, both in industry and academia. We invite readers to join ongoing efforts to promote ethical publication practices.

  3. Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Empirical Testing. Volume 2

    NASA Technical Reports Server (NTRS)

    Johnson, Kenneth L.; White, K. Preston, Jr.

    2012-01-01

    The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. In this paper, the results of empirical tests intended to assess the accuracy of acceptance sampling plan calculators implemented for six variable distributions are presented.

  4. Citizens' views on the practices of zero-grazing and cow-calf separation in the dairy industry: Does providing information increase acceptability?

    PubMed

    Hötzel, Maria J; Cardoso, Clarissa S; Roslindo, Angélica; von Keyserlingk, Marina A G

    2017-05-01

    The primary aim of this study was to assess the influence of provision of information on lay citizens' opinions regarding 2 common management practices, zero-grazing and cow-calf separation. To aid in the interpretation of the findings, our secondary aim was to explore the awareness and opinions of Brazilian citizens about these practices. We surveyed a convenience sample of Brazilian citizens (192 men and 208 women), recruited in a public place, with the majority stating that they were largely unfamiliar with animal production and lived in urban environments. Participants were presented short scenarios with information on the primary production factors and welfare concerns for and against zero-grazing (n = 200) or cow-calf separation (n = 200). Participants were then asked to state their position (reject, indifferent, or support), and to provide the reason(s) justifying their position. Immediately following, participants were provided a short statement describing either zero-grazing or cow-calf separation, depending on what question they responded to in the first part. Two closed questions (Q) followed each of these statements: (Q1) "Are you aware of this practice?" with choices yes, somewhat, or no, and (Q2) "What is your position regarding this practice?" with choices reject, indifferent, or support. Only 31 and 33% of the respondents were aware of zero-grazing and cow-calf separation, respectively. Previous awareness of existence of practice did not influence levels of support. Provision of information resulted in more people rejecting the practices of zero-grazing and cow-calf separation. Participants' main justifications to reject zero-grazing and cow-calf separation focused on perceived negative effects of practices on farm animal welfare and product quality, and loss of naturalness. Survey participants, Brazilians living in urban environments, with little or no association with dairy production, were generally unaware that many cows do not have access to pasture and that cows are separated from their calf at birth. Independent of provision of additional information, most participants did not support these practices. Provision of brief explanatory information played a minor role in influencing people's views, but failed to result in general acceptance. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  5. An extension of trust and TAM model with IDT in the adoption of the electronic logistics information system in HIS in the medical industry.

    PubMed

    Tung, Feng-Cheng; Chang, Su-Chao; Chou, Chi-Min

    2008-05-01

    Ever since National Health Insurance was introduced in 1995, the number of insurants increased to over 96% from 50 to 60%, with a continuous satisfaction rating of about 70%. However, the premium accounted for 5.77% of GDP in 2001 and the Bureau of National Health Insurance had pressing financial difficulties, so it reformed its expenditure systems, such as fee for service, capitation, case payment and the global budget system in order to control the rising medical costs. Since the change in health insurance policy, most hospitals attempted to reduce their operating expenses and improve efficiency. Introducing the electronic logistics information system is one way of reducing the cost of the department of central warehouse and the nursing stations. Hence, the study proposes a technology acceptance research model and examines how nurses' acceptance of the e-logistics information system has been affected in the medical industry. This research combines innovation diffusion theory, technology acceptance model and added two research parameters, trust and perceived financial cost to propose a new hybrid technology acceptance model. Taking Taiwan's medical industry as an experimental example, this paper studies nurses' acceptance of the electronic logistics information system. The structural equation modeling technique was used to evaluate the causal model and confirmatory factor analysis was performed to examine the reliability and validity of the measurement model. The results of the survey strongly support the new hybrid technology acceptance model in predicting nurses' intention to use the electronic logistics information system. The study shows that 'compatibility', 'perceived usefulness', 'perceived ease of use', and 'trust' all have great positive influence on 'behavioral intention to use'. On the other hand 'perceived financial cost' has great negative influence on behavioral intention to use.

  6. Physicians under the influence: social psychology and industry marketing strategies.

    PubMed

    Sah, Sunita; Fugh-Berman, Adriane

    2013-01-01

    Pharmaceutical and medical device companies apply social psychology to influence physicians' prescribing behavior and decision making. Physicians fail to recognize their vulnerability to commercial influences due to self-serving bias, rationalization, and cognitive dissonance. Professionalism offers little protection; even the most conscious and genuine commitment to ethical behavior cannot eliminate unintentional, subconscious bias. Six principles of influence - reciprocation, commitment, social proof, liking, authority, and scarcity - are key to the industry's routine marketing strategies, which rely on the illusion that the industry is a generous avuncular partner to physicians. In order to resist industry influence, physicians must accept that they are vulnerable to subconscious bias and have both the motivation and means to resist industry influence. A culture in which accepting industry gifts engenders shame rather than gratitude will reduce conflicts of interest. If greater academic prestige accrues to distant rather than close relationships with industry, then a new social norm may emerge that promotes patient care and scientific integrity. In addition to educating faculty and students about the social psychology underlying sophisticated but potentially manipulative marketing and about how to resist it, academic medical institutions should develop strong organizational policies to counteract the medical profession's improper dependence on industry. © 2013 American Society of Law, Medicine & Ethics, Inc.

  7. A Study to Develop a Scale for Determining the Social Acceptance Levels of Special-Needs Students, Participating in Inclusion Practices

    ERIC Educational Resources Information Center

    Arslan, Erdinc; Sahbaz, Umit

    2012-01-01

    The aim of this study is to develop a scale of social acceptance for determining the social acceptance levels of special-needs students, participating in inclusion practices. The target population of the research is 8th grade students of all primary schools in the provincial center of Burdur in the 2008 to 2009 academic year and the target study…

  8. Birth Control Practices and Levels of Development in India.

    ERIC Educational Resources Information Center

    Karan, P.P.; And Others

    1978-01-01

    Analyzes the spatial patterns of acceptance of birth control practices in India and examines the relationship between these patterns and levels of economic development. Suggests implications of the area differences in acceptance patterns for family planning program policymakers. (Author)

  9. 16 CFR 18.8 - Deception as to origin or source of industry products.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Deception as to origin or source of industry products. 18.8 Section 18.8 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is...

  10. Use of organs from donors with bloodstream infection, pneumonia, and influenza: Results of a survey of infectious diseases practitioners.

    PubMed

    Mehta, Sanjay R; Logan, Cathy; Kotton, Camille N; Kumar, Deepali; Aslam, Saima

    2017-02-01

    Potential organ donors may be admitted with an infection to an intensive care unit, or contract a nosocomial infection during their stay, increasing the risk of potential transmission to the recipient. Because of a lack of practice guidelines and large-scale data on this topic, we undertook a survey to assess the willingness of transplant infectious diseases (ID) physicians to accept such organs. We performed a 10-question survey of ID providers from the American Society of Transplantation Infectious Disease Community of Practice to determine the scope of practice regarding acceptance of organs from donors with bloodstream infection, pneumonia, and influenza prior to organ procurement, as well as management of such infections following transplantation. Among 60 respondents to our survey, a majority indicated that organs would be accepted from donors bacteremic with streptococci (76%) or Enterobacteriaceae (73%) without evidence of drug resistance. Acceptance rates varied based on infecting organism, type of organ, and center size. Ten percent of respondents would accept an organ from a donor bacteremic with a carbapenem-resistant organism. Over 90% of respondents would accept an organ other than a lung from a donor with influenza on treatment, compared with 52% that would accept a lung in the same setting. This study is the first to our knowledge to survey transplant ID providers regarding acceptance of organs based on specific infections in the donor. These decisions are often based on limited published data and experience. Better characterization of the outcomes from donors with specific types of infection could lead to liberalization of organ acceptance practices across centers. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  11. Oral nutritional supplements intake and nutritional status among inpatients admitted in a tertiary hospital.

    PubMed

    Lammel Ricardi, Juliana; Marcadenti, Aline; Perocchin de Souza, Simone; Siviero Ribeiro, Anelise

    2013-01-01

    Malnutrition is very common in hospitals and inpatients with prescription of oral nutritional supplementation have improvement of the nutritional status. To detect the total acceptance rate and a possible association between oral nutritional supplements intake and nutritional status. A cross-sectional study was carried out among 398 inpatients. Fifteen types of supplements were analyzed and nutritional status was detected by Subjective Global Assessment (SGA). Rest-ingestion index (RI) was obtained and Modified Poisson's regression was used to detect associations between nutritional status and intake of nutritional supplements. The prevalence of malnutrition was 43.7% and overall acceptance of supplements was around 75%. Industrialized supplements have better acceptance among well-nourished inpatients and patients who ate less than 80% of the supplement offered (industrialized or homemade) had higher risk for malnutrition (48%). There was an association between oral nutritional supplements intake and nutritional status, despite the good acceptance rate. Copyright © AULA MEDICA EDICIONES 2013. Published by AULA MEDICA. All rights reserved.

  12. Investigation of Food Acceptability and Feeding Practices for Lipid Nutrient Supplements and Blended Flours Used to Treat Moderate Malnutrition

    ERIC Educational Resources Information Center

    Wang, Richard J.; Trehan, Indi; LaGrone, Lacey N.; Weisz, Ariana J.; Thakwalakwa, Chrissie M.; Maleta, Kenneth M.; Manary, Mark J.

    2013-01-01

    Objective: To examine acceptability and feeding practices associated with different supplementary food items and identify practices associated with weight gain. Methods: Caregivers (n = 409) whose children had been enrolled in a trial comparing a fortified corn-soy blended flour (CSB++), soy ready-to-use supplementary food (RUSF), and soy/whey…

  13. Manufacturing waste disposal practices of the chemical propulsion industry

    NASA Technical Reports Server (NTRS)

    Goldberg, Benjamin E.; Adams, Daniel E.; Schutzenhofer, Scott A.

    1995-01-01

    The waste production, mitigation and disposal practices of the United States chemical propulsion industry have been investigated, delineated, and comparatively assessed to the U.S. industrial base. Special emphasis has been placed on examination of ozone depleting chemicals (ODC's). The research examines present and anticipated future practices and problems encountered in the manufacture of solid and liquid propulsion systems. Information collected includes current environmental laws and regulations that guide the industry practices, processes in which ODC's are or have been used, quantities of waste produced, funding required to maintain environmentally compliant practices, and preventive efforts.

  14. Smoking in movies in Australia: who feels over-exposed and what level of regulation will the community accept?

    PubMed

    Paul, Christine L; Walsh, Raoul A; Stacey, Fiona; Tzelepis, Flora; Oakes, Wendy; Tang, Anita

    2008-12-01

    This study aimed to examine recent levels of exposure to smoking in movies, how the community perceived the level of smoking they saw in recently-viewed movies and whether there was community support for any form of regulation. As part of a 2004 New South Wales survey of smoking-related perceptions and practices, 1,154 adults participated in a computer-assisted telephone interview about perceptions relating to smoking depiction in movies and television. More than one-quarter of those who had seen a recent movie in the cinema (28.5%) or on DVD (33.9%) thought that the movie contained excessive or inappropriate smoking. More than half the sample (59.1%) considered it likely the tobacco industry played a role in the level of smoking depiction, although only 18% of those who thought a recent movie contained excessive smoking attributed this to the tobacco industry. Almost two-thirds of respondents favoured screening anti-tobacco advertisements prior to movies with smoking. Cinema and DVD movies commonly include scenes where there is excessive or inappropriate smoking. It is widely believed that the tobacco industry is contributing to this, and there is strong community support for action to curb the harmful influences this may be having.

  15. Push or be punished: tobacco industry documents reveal aggression against businesses that discourage tobacco use

    PubMed Central

    LANDMAN, A.

    2000-01-01

    OBJECTIVE—To learn how the tobacco industry reacted to businesses' voluntarily enacting policies to discourage tobacco use and minimise exposure of employees and patrons to secondhand smoke.
DATA SOURCES—Internal tobacco industry documents discovered among those posted on the internet. Approximately 24 million documents have been posted as of this writing. Information in this article was culled from among these documents, which have been made public as a unique requirement of the state of Minnesota's settlement with the industry.
STUDY SELECTION—Those documents were used that offered insight into, and which gave a perspective on, the industry's attitudes and reactions toward other businesses as they adopted tobacco-free policies.
CONCLUSIONS—In the wake of widespread acceptance that tobacco use causes illness and death, many individual businesses (and even entire industries) took positive steps to eliminate employees', customers', and facilities' exposure to tobacco smoke. Steps were also taken to discourage tobacco use among employees. Internal tobacco industry documents show that the industry reacted with aggression, and in some cases with retribution, against businesses that voluntarily adopted policies to discourage tobacco use. The intent of these actions appears to be to reverse these policies, with a broader goal of neutralising large scale public and private trends that reflect the decreasing social acceptability of tobacco use.


Keywords: tobacco industry; tobacco-free policies; aggression PMID:10982580

  16. Evaluation of Industry Relationships Among Authors of Otolaryngology Clinical Practice Guidelines.

    PubMed

    Horn, Jarryd; Checketts, Jake Xavier; Jawhar, Omar; Vassar, Matt

    2018-03-01

    Financial relationships between physicians and industry have influence on patient care. Therefore, organizations producing clinical practice guidelines (CPGs) must have policies limiting financial conflicts during guideline development. To evaluate payments received by physician authors of otolaryngology CPGs, compare disclosure statements for accuracy, and investigate the extent to which the American Academy of Otolaryngology-Head and Neck Surgery complied with standards for guideline development from the Institute of Medicine (IOM). This cross-sectional analysis retrieved CPGs from the American Academy of Otolaryngology-Head and Neck Surgery Foundation that were published or revised from January 1, 2013, through December 31, 2015, by 49 authors. Data were retrieved from December 1 through 31, 2016. Industry payments received by authors were extracted using the Centers for Medicare & Medicaid Services Open Payments database. The values and types of these payments were then evaluated and used to determine whether self-reported disclosure statements were accurate and whether guidelines adhered to applicable IOM standards. The monetary amounts and types of payments received by physicians who author otolaryngology guidelines and the accuracy of disclosure statements. Of the 49 physicians in this sample, 39 (80%) received an industry payment. Twenty-one authors (43%) accepted more than $1000; 12 (24%), more than $10 000; 7 (14%), more than $50 000; and 2 (4%), more than $100 000. Mean (SD) financial payments amounted to $18 431 ($53 459) per physician. Total reimbursement for all authors was $995 282. Disclosure statements disagreed with the Open Payments database for 3 authors, amounting to approximately $20 000 among them. Of the 3 IOM standards assessed, only 1 was consistently enforced. Some CPG authors failed to fully disclose all financial conflicts of interest, and most guideline development panels and chairpersons had conflicts. In addition, adherence to IOM standards for guideline development was lacking. This study is relevant to CPG panels authoring recommendations, physicians implementing CPGs to guide patient care, and the organizations establishing policies for guideline development.

  17. Cereal bars produced with banana peel flour: evaluation of acceptability and sensory profile.

    PubMed

    Carvalho, Vania Silva; Conti-Silva, Ana Carolina

    2018-01-01

    A mixture design was used to investigate the effects of banana peel flour, rice flakes and oat flour on sensory acceptability of cereal bars, with subsequent evaluation of sensory profile of products identified as having high acceptability. Regions of greater response for acceptability of the cereal bars, which are dependent on the three investigated components, were found. Although having good acceptability, sensory profiles of cereal bars were different. A cereal bar with the lowest quantity of banana peel flour was described as having a higher amount of rice flakes, chewiness and crispness, while formulations with intermediate and highest quantities of banana peel flour were described by darker color, higher banana aroma and bitter taste. Contrary to expectations, banana flavor of cereal bar with highest quantity of banana peel flour was lower than cereal bars with intermediate quantities. Cereal bars were not different in terms of hardness and adhesiveness and they also had a similar sweet taste and oat flavor. The use of banana peel flour in production of cereal bars is feasible and, even with different sensory profiles, cereal bars with banana peel flour are acceptable, which may favor the development of new products for different market niches. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  18. Conceptualisation of the characteristics of advanced practitioners in the medical radiation professions

    PubMed Central

    Smith, Tony; Harris, Jillian; Woznitza, Nick; Maresse, Sharon; Sale, Charlotte

    2015-01-01

    Professions grapple with defining advanced practice and the characteristics of advanced practitioners. In nursing and allied health, advanced practice has been defined as ‘a state of professional maturity in which the individual demonstrates a level of integrated knowledge, skill and competence that challenges the accepted boundaries of practice and pioneers new developments in health care’. Evolution of advanced practice in Australia has been slower than in the United Kingdom, mainly due to differences in demography, the health system and industrial relations. This article describes a conceptual model of advanced practitioner characteristics in the medical radiation professions, taking into account experiences in other countries and professions. Using the CanMEDS framework, the model includes foundation characteristics of communication, collaboration and professionalism, which are fundamental to advanced clinical practice. Gateway characteristics are: clinical expertise, with high level competency in a particular area of clinical practice; scholarship and teaching, including a masters qualification and knowledge dissemination through educating others; and evidence-based practice, with judgements made on the basis of research findings, including research by the advanced practitioner. The pinnacle of advanced practice is clinical leadership, where the practitioner has a central role in the health care team, with the capacity to influence decision making and advocate for others, including patients. The proposed conceptual model is robust yet adaptable in defining generic characteristics of advanced practitioners, no matter their clinical specialty. The advanced practice roles that evolve to meet future health service demand must focus on the needs of patients, local populations and communities. PMID:26451243

  19. Conceptualisation of the characteristics of advanced practitioners in the medical radiation professions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Smith, Tony; Harris, Jillian; Woznitza, Nick

    Professions grapple with defining advanced practice and the characteristics of advanced practitioners. In nursing and allied health, advanced practice has been defined as ‘a state of professional maturity in which the individual demonstrates a level of integrated knowledge, skill and competence that challenges the accepted boundaries of practice and pioneers new developments in health care’. Evolution of advanced practice in Australia has been slower than in the United Kingdom, mainly due to differences in demography, the health system and industrial relations. This article describes a conceptual model of advanced practitioner characteristics in the medical radiation professions, taking into account experiencesmore » in other countries and professions. Using the CanMEDS framework, the model includes foundation characteristics of communication, collaboration and professionalism, which are fundamental to advanced clinical practice. Gateway characteristics are: clinical expertise, with high level competency in a particular area of clinical practice; scholarship and teaching, including a masters qualification and knowledge dissemination through educating others; and evidence-based practice, with judgements made on the basis of research findings, including research by the advanced practitioner. The pinnacle of advanced practice is clinical leadership, where the practitioner has a central role in the health care team, with the capacity to influence decision making and advocate for others, including patients. The proposed conceptual model is robust yet adaptable in defining generic characteristics of advanced practitioners, no matter their clinical specialty. The advanced practice roles that evolve to meet future health service demand must focus on the needs of patients, local populations and communities.« less

  20. Benefits and risks of adopting the global code of practice for recreational fisheries

    USGS Publications Warehouse

    Arlinghaus, Robert; Beard, T. Douglas; Cooke, Steven J.; Cowx, Ian G.

    2012-01-01

    Recreational fishing constitutes the dominant or sole use of many fish stocks, particularly in freshwater ecosystems in Western industrialized countries. However, despite their social and economic importance, recreational fisheries are generally guided by local or regional norms and standards, with few comprehensive policy and development frameworks existing across jurisdictions. We argue that adoption of a recently developed Global Code of Practice (CoP) for Recreational Fisheries can provide benefits for moving recreational fisheries toward sustainability on a global scale. The CoP is a voluntary document, specifically framed toward recreational fisheries practices and issues, thereby complementing and extending the United Nation's Code of Conduct for Responsible Fisheries by the Food and Agricultural Organization. The CoP for Recreational Fisheries describes the minimum standards of environmentally friendly, ethically appropriate, and—depending on local situations—socially acceptable recreational fishing and its management. Although many, if not all, of the provisions presented in the CoP are already addressed through national fisheries legislation and state-based fisheries management regulations in North America, adopting a common framework for best practices in recreational fisheries across multiple jurisdictions would further promote their long-term viability in the face of interjurisdictional angler movements and some expanding threats to the activity related to shifting sociopolitical norms.

  1. Johns Hopkins nursing evidence-based practice Johns Hopkins nursing evidence-based practice Sandra L Dearholt and Deborah Dang Sigma Theta Tau International £24.70 256pp 9781935476764 1935476769 [Formula: see text].

    PubMed

    2012-10-26

    EVIDENCE-BASED PRACTICE has become the accepted term for a systematic approach by all healthcare professionals to service provision. However, as this and other recent publications demonstrate, even though there is acceptance in theory that practice should be evidence based, making the concept a reality in clinical and educational settings still requires work.

  2. Evaluation of emotion-based messages designed to motivate Hispanic and Asian parents of early adolescents to engage in calcium-rich food and beverage parenting practices.

    PubMed

    Banna, Jinan Corinne; Reicks, Marla; Gunther, Carolyn; Richards, Rickelle; Bruhn, Christine; Cluskey, Mary; Wong, Siew Sun; Misner, Scottie; Hongu, Nobuko; Johnston, N Paul

    2016-08-01

    Setting healthful beverage expectations, making calcium-rich foods and beverages (CRF/B) available, and role modeling are parenting practices promoting calcium intake among early adolescents. This study aimed to evaluate emotion-based messages designed to motivate parents of early adolescents to perform these practices. Emotion-based messages were developed for each parenting practice and tested in 35 parents from 5 states. Findings were used to modify messages and develop a survey administered via Amazon MechanicalTurk to a convenience sample of Asian (n = 166) and Hispanic (n = 184) parents of children 10-13 years. Main outcome measures were message comprehension, motivation, relevance, acceptability, and novelty. Engagement in the parenting practices was also assessed. Message comprehension was acceptable for the majority of parents. Most also agreed that messages were motivational (setting healthful beverage expectations (69.0%), making CRF/B available (67.4%), and role modeling (80.0%)), relevant and acceptable. About 30-50% indicated they had not seen the information before. Many parents indicated they were already engaging in the practices (> 70%). No racial/ethnic differences were observed for responses to messages or engaging in parenting practices. Results indicate that emotion-based messages designed to motivate parents to engage in parenting practices that promote calcium intake among early adolescents were motivating, relevant, and acceptable.

  3. Measurements of consumer attitudes and their influence on food choice and acceptability (AIR-CAT).

    PubMed

    Risvik, E; Issanchou, S; Shepherd, R; Tuorila, H

    2001-08-01

    A changing European food market demands insight into consumer attitudes and their influence on food choice and acceptability. This multidisciplinary area needs to bring together scientists from all regions of Europe and with very different scientific backgrounds. The primary objectives of this concerted action have been: to establish a base with state of the art methods for measurements of consumer attitudes; to review and test existing methods in practical applications in collaboration with European food industries; to perform comparative studies between laboratories on food products, where attitudes play different roles for consumer behaviour in the community countries, such as transgenic foods, irradiated foods, foods with different additives, declarations and process technologies, foods with different origin declarations, ecological foods and foods with strong health connotations (such as high-fat foods). The members of the action have published more than 130 publications related to aspects of how consumer attitudes can be measured and how food choice behaviour is related to acceptability, during the last four years. Studies have been conducted in relation to methodological aspects as well as particular studies related to specific food items and regions for food production. The paper will give a brief selection of relevant results from experiments reported through the action. During 2001 a textbook called "Food, People and Society, in a European Perspective", will be published. The book was initiated during the action and is later supported with additional authors. Altogether 29 chapters will cover the whole spectrum of topics from consumer food choice and acceptability to market perspectives and risk analysis.

  4. A COMPARISON OF GREEN SUPPLY CHAIN MANAGEMENT PRACTICES AMONG INDUSTRIES SECTORS IN CHINA

    NASA Astrophysics Data System (ADS)

    Sun, Ying; Miyadera, Tetsuhiko; Fujita, Tsuyoshi

    This paper aims to examine the differences of Green supply chain management (GSCM) implementation among chemical, automobile and machinery industries in China based on a questionnaire survey designed by Industrial Ecology at two industrial parks in Shenyang city. Exploratory factor analysis and one way analysis of variance (ANOVA) were used to analyze the data. The main result was that the GSCM practices of the three industries are still at a beginning stage. The level of GSCM practices of automobile industry (promoted by international market competition) was higher than those of chemical and machinery industry (promoted by domestic laws and policies).

  5. The environmental risk as a culture in the Sinos Valley, Brazil.

    PubMed

    Pedde, Valdir; Figueiredo, João A; Tundisi, José G; Lenz, Cátia A

    2014-12-01

    The proposal of analysis of the social-environmental perception will be developed from the discourse as a constitutive element of reality. The discourse practices and their concretion will be the source of meaning and social-cultural value. Thus, the chosen research method was the qualitative and quantitative case study. In the first part of the text we will recapture a theoretical input by Mary Douglas on risk and culture, as well as on the acceptance of the risks in society. In the second part, we cover a few data of the case of the risks resulting from the tanning industry and on how the society of the "Vale do Rio dos Sinos" relates to these risks. In this article we conclude that risk perception of the population is directly related with past experiences, thus, assigning a meaning to all new events. This meaning is the result of a sociocultural construction. It is worth noting that behind this history, there are basic issues related to population survival, i.e., both the industrialists and workers establish partnerships when the society creates a movement against the leather industry.

  6. The environmental risk as a culture in the Sinos Valley, Brazil.

    PubMed

    Pedde, Valdir; Figueiredo, João A; Tundisi, José G; Lenz, Cátia A

    2014-12-09

    The proposal of analysis of the social-environmental perception will be developed from the discourse as a constitutive element of reality. The discourse practices and their concretion will be the source of meaning and social-cultural value. Thus, the chosen research method was the qualitative and quantitative case study. In the first part of the text we will recapture a theoretical input by Mary Douglas on risk and culture, as well as on the acceptance of the risks in society. In the second part, we cover a few data of the case of the risks resulting from the tanning industry and on how the society of the "Vale do Rio dos Sinos" relates to these risks. In this article we conclude that risk perception of the population is directly related with past experiences, thus, assigning a meaning to all new events. This meaning is the result of a sociocultural construction. It is worth noting that behind this history, there are basic issues related to population survival, i.e., both the industrialists and workers establish partnerships when the society creates a movement against the leather industry.

  7. Advances in the industrial production of halal and kosher red meat.

    PubMed

    Farouk, Mustafa M

    2013-12-01

    The worldwide volume and value of trade in halal and kosher meat and co-products are huge. Muslim countries alone consumed meat estimated to be worth USD 57.2 billion in 2008. The halal and kosher principles that govern the production of red meat have many similarities, as well as some fundamental differences. Perhaps the most significant difference is that at the time of slaughter, the animal needs only to be alive to meet the minimum halal requirement, but must be both alive and conscious for kosher. It is for this reason that reversible pre-slaughter stunning is acceptable only for halal meat, although a compromise form of post-slaughter stunning is now considered kosher in some countries. Extensive research on animal physiology and welfare has characterised and optimised the methods for stunning livestock, and enabled advancement in associated technologies. This forms the basis for harmonising the religious and secular requirements for the protection of animal welfare at slaughter. These technologies and the associated processing practices for the industrial production of halal and kosher meat are reviewed in this paper. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. [The attitude of physicians regarding the promotion strategies of the pharmaceutical industry].

    PubMed

    Castresana, Leonardo; Mejia, Raul; Aznar, Mireya

    2005-01-01

    Pharmaceutical companies invest large sums of money promoting their products. They use a multifaceted approach to drug promotion, incorporating techniques such as hospital and office detailing by pharmaceutical representatives. Although these practices are commonly used, little has been published about the attitude of physicians concerning their interaction with the pharmaceutical industry. We performed a cross sectional anonymous survey to identify the extent of and attitudes towards the relationship between the physicians and the pharmaceutical industry and its representatives with its impact on the knowledge, attitude and behavior of the physicians. Internists, cardiologists and dermatologists who work in ambulatory settings from private and public hospitals in Buenos Aires city participated in this study, 44% were female, 35% residents, 65% staff physicians, averaging 41 years of age. Of these, 86% receive medical samples frecuently, 39% desk gifts, 19% invitations to congresses and 12% free lunches. Half of the doctors believe that receiving benefits from the pharmaceutical industry has an influence on medical prescription, but only 27% accept this as influential in their own prescriptions. Residents consider, more frequently than others, that these activities affect their decisions, (42% vs. 18% p = 0.007, global 30%). Most of the participants consider appropriate receiving these benefits, although 35% think that they affect the final price of medications. In conclusion, there is a high level of interaction between the pharmaceutical industry and our medical population. Although the latter recognize the influence of these interactions on prescriptions and the elevation of the cost of the final product, they find it appropriate to receive benefits.

  9. Method for Improving Separation of Carbohydrates from Wood Pulping Liquors and Wood or Biomass Hydrolysis Liquors

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Compere, A L; Marcoccia, B S; Elliott, J

    2012-08-31

    Work with industrial partners to perform the studies needed to commercialize U.S. patent 7,699,958 for separation of carbohydrates from wood pulping liquors and wood or biomass hydrolysis liquors. These include: 1) selection of the best pulp mill liquor withdrawal sites, 2) additional purification or enzyme hydrolysis required to obtain acceptable sugar feedstocks, 3) and work with partners to optimize the stream and purification methods to provide acceptable feedstocks for algal fuels and industrial chemicals production, and 4) preparation of samples large enough for testing by downstream partners.

  10. The 3T3 neutral red uptake phototoxicity test: practical experience and implications for phototoxicity testing--the report of an ECVAM-EFPIA workshop.

    PubMed

    Ceridono, Mara; Tellner, Pär; Bauer, Daniel; Barroso, João; Alépée, Nathalie; Corvi, Raffaella; De Smedt, Ann; Fellows, Mick D; Gibbs, Neil K; Heisler, Eckhard; Jacobs, Abigail; Jirova, Dagmar; Jones, David; Kandárová, Helena; Kasper, Peter; Akunda, Jacqueline Kinyamu; Krul, Cyrille; Learn, Douglas; Liebsch, Manfred; Lynch, Anthony M; Muster, Wolfgang; Nakamura, Kazuichi; Nash, J Frank; Pfannenbecker, Uwe; Phillips, Gareth; Robles, Catherine; Rogiers, Vera; Van De Water, Femke; Liminga, Ulla Wändel; Vohr, Hans-Werner; Wattrelos, Olivier; Woods, Julie; Zuang, Valérie; Kreysa, Joachim; Wilcox, Phil

    2012-08-01

    This is the report from the "ECVAM-EFPIA workshop on 3T3 NRU Phototoxicity Test: Practical Experience and Implications for Phototoxicity Testing", jointly organized by ECVAM and EFPIA and held on the 25-27 October 2010 in Somma Lombardo, Italy. The European Centre for the Validation of Alternative Methods (ECVAM) was established in 1991 within the European Commission Joint Research, based on a Communication from the European Commission (1991). The main objective of ECVAM is to promote the scientific and regulatory acceptance of alternative methods which are of importance to the biosciences and which reduce, refine and replace the use of laboratory animals. The European Federation of Pharmaceuticals Industries and Association (EFPIA) represent the pharmaceutical industry operating in Europe. Through its direct membership of 31 national associations and 40 leading pharmaceutical companies, EFPIA is the voice on the EU scene of 2200 companies committed to researching, developing and bringing to patients new medicines that improve health and the quality of life around the world. The workshop, co-chaired by Joachim Kreysa (ECVAM) and Phil Wilcox (GSK, EFPIA) involved thirty-five experts from academia, regulatory authorities and industry, invited to contribute with their experiences in the field of phototoxicology. The main objectives of the workshop were: -to present 'in use' experience of the pharmaceutical industry with the 3T3 Neutral Red Uptake Phototoxicity Test (3T3 NRU-PT), -to discuss why it differs from the results in the original validation exercise, -to discuss technical issues and consider ways to improve the usability of the 3T3 NRU-PT for (non-topical) pharmaceuticals, e.g., by modifying the threshold of chemical light absorption to trigger photo-toxicological testing, and by modifying technical aspects of the assay, or adjusting the criteria used to classify a positive response. During the workshop, the assay methodology was reviewed by comparing the OECD Test Guideline (TG 432) with the protocols used in testing laboratories, data from EFPIA and JPMA 'surveys' were presented and possible reasons for the outcomes were discussed. Experts from cosmetics and pharmaceutical industries reported on their experience with the 3T3 NRU-PT and evidence was presented for phototoxic clinical symptoms that could be linked to certain relevant molecules. Brainstorming sessions discussed if the 3T3 NRU-PT needed to be improved and whether alternatives to the 3T3 NRU-PT exist. Finally, the viewpoint from EU and US regulators was presented. In the final session, the conclusions of the meeting were summarized, with action points. It was concluded that the 3T3 NRU-PT identifies phototoxicological hazards with a 100% sensitivity, and thus is accepted as the tier one test that correctly identifies the absence of phototoxic potential. Consequently, positive results in the 3T3 NRU-PT often do not translate into a clinical phototoxicity risk. Possible ways to improve the practical use of this assay include: (i) adaptation of changed UV/vis-absorption criteria as a means to reduce the number of materials tested, (ii) reduction of the highest concentration to be tested, and (iii) consideration of modifying the threshold criteria for the prediction of a positive call in the test. Copyright © 2012 Elsevier Inc. All rights reserved.

  11. Investigating the state of physiologically based kinetic modelling practices and challenges associated with gaining regulatory acceptance of model applications.

    PubMed

    Paini, Alicia; Leonard, Jeremy A; Kliment, Tomas; Tan, Yu-Mei; Worth, Andrew

    2017-11-01

    Physiologically based kinetic (PBK) models are used widely throughout a number of working sectors, including academia and industry, to provide insight into the dosimetry related to observed adverse health effects in humans and other species. Use of these models has increased over the last several decades, especially in conjunction with emerging alternative methods to animal testing, such as in vitro studies and data-driven in silico quantitative-structure-activity-relationship (QSAR) predictions. Experimental information derived from these new approach methods can be used as input for model parameters and allows for increased confidence in models for chemicals that did not have in vivo data for model calibration. Despite significant advancements in good modelling practice (GMP) for model development and evaluation, there remains some reluctance among regulatory agencies to use such models during the risk assessment process. Here, the results of a survey disseminated to the modelling community are presented in order to inform the frequency of use and applications of PBK models in science and regulatory submission. Additionally, the survey was designed to identify a network of investigators involved in PBK modelling and knowledgeable of GMP so that they might be contacted in the future for peer review of PBK models, especially in regards to vetting the models to such a degree as to gain a greater acceptance for regulatory purposes. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  12. The "general recognition and acceptance" standard of objectivity for good faith in prescribing: legal and medical implications.

    PubMed

    Brushwood, David B

    2007-01-01

    The United States Court of Appeals for the 4th Circuit has ruled that a jury considering charges of drug trafficking against a pain management physician should be instructed that the defendant's good faith is a defense to the charges. The court rejected a subjective standard of good faith, and instead ruled that the good faith of the defendant must be evaluated from an objective perspective. This objective standard requires that the jury determine whether the defendant was practicing in accordance with the standard generally recognized and accepted in the United States. General recognition and acceptance are determined on a case-by-case basis, within the context of a defendant's practice. Simply because a physician's practice is out of the norm for many physicians does not mean it can't be generally recognized and accepted within the standard of medical practice. Expert witness testimony of pain management physicians will assist juries in the application of this standard for good faith in prescribing.

  13. A Framework for Comprehensive Health Terminology Systems in the United States

    PubMed Central

    Chute, Christopher G.; Cohn, Simon P.; Campbell, James R.

    1998-01-01

    Health care in the United States has become an information-intensive industry, yet electronic health records represent patient data inconsistently for lack of clinical data standards. Classifications that have achieved common acceptance, such as the ICD-9-CM or ICD, aggregate heterogeneous patients into broad categories, which preclude their practical use in decision support, development of refined guidelines, or detailed comparison of patient outcomes or benchmarks. This document proposes a framework for the integration and maturation of clinical terminologies that would have practical applications in patient care, process management, outcome analysis, and decision support. Arising from the two working groups within the standards community—the ANSI (American National Standards Institute) Healthcare Informatics Standards Board Working Group and the Computer-based Patient Records Institute Working Group on Codes and Structures—it outlines policies regarding 1) functional characteristics of practical terminologies, 2) terminology models that can broaden their applications and contribute to their sustainability, 3) maintenance attributes that will enable terminologies to keep pace with rapidly changing health care knowledge and process, and 4) administrative issues that would facilitate their accessibility, adoption, and application to improve the quality and efficiency of American health care. PMID:9824798

  14. An evaluation of human factors research for ultrasonic inservice inspection

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pond, D.J.; Donohoo, D.T.; Harris, R.V. Jr.

    1998-03-01

    This work was undertaken to determine if human factors research has yielded information applicable to upgrading requirements in ASME Boiler and Pressure Vessel Code Section XI, improving methods and techniques in Section V, and/or suggesting relevant research. A preference was established for information and recommendations which have become accepted and standard practice. Manual Ultrasonic Testing/Inservice Inspection (UT/ISI) is a complex task subject to influence by dozens of variables. This review frequently revealed equivocal findings regarding effects of environmental variables as well as repeated indications that inspection performance may be more, and more reliably, influenced by the workers` social environment, includingmore » managerial practices, than by other situational variables. Also of significance are each inspector`s relevant knowledge, skills, and abilities, and determination of these is seen as a necessary first step in upgrading requirements, methods, and techniques as well as in focusing research in support of such programs, While understanding the effects and mediating mechanisms of the variables impacting inspection performance is a worthwhile pursuit for researchers, initial improvements in industrial UTASI performance may be achieved by implementing practices already known to mitigate the effects of potentially adverse conditions. 52 refs., 2 tabs.« less

  15. Toward a New Industrial America.

    ERIC Educational Resources Information Center

    Berger, Suzanne; And Others

    1989-01-01

    Summarizes the positive and negative sides of American industrial practices determined by the Commission on Industrial Productivity at the Massachusetts Institute of Technology. Describes five imperatives recommended by the commission based on its study of current weakness and best practices in American industry. (YP)

  16. A linear regression approach to evaluate the green supply chain management impact on industrial organizational performance.

    PubMed

    Mumtaz, Ubaidullah; Ali, Yousaf; Petrillo, Antonella

    2018-05-15

    The increase in the environmental pollution is one of the most important topic in today's world. In this context, the industrial activities can pose a significant threat to the environment. To manage problems associate to industrial activities several methods, techniques and approaches have been developed. Green supply chain management (GSCM) is considered one of the most important "environmental management approach". In developing countries such as Pakistan the implementation of GSCM practices is still in its initial stages. Lack of knowledge about its effects on economic performance is the reason because of industries fear to implement these practices. The aim of this research is to perceive the effects of GSCM practices on organizational performance in Pakistan. In this research the GSCM practices considered are: internal practices, external practices, investment recovery and eco-design. While, the performance parameters considered are: environmental pollution, operational cost and organizational flexibility. A set of hypothesis propose the effect of each GSCM practice on the performance parameters. Factor analysis and linear regression are used to analyze the survey data of Pakistani industries, in order to authenticate these hypotheses. The findings of this research indicate a decrease in environmental pollution and operational cost with the implementation of GSCM practices, whereas organizational flexibility has not improved for Pakistani industries. These results aim to help managers regarding their decision of implementing GSCM practices in the industrial sector of Pakistan. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. 76 FR 44013 - Draft Guidance for Industry: Implementation of Acceptable Full-Length and Abbreviated Donor...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-22

    ... and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug Administration (FDA) is... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-D-0487... dated December 2010, as an acceptable mechanism that is consistent with FDA's requirements and...

  18. Relationship Between Consumer Acceptability and Pungency-Related Flavor Compounds of Vidalia Onions.

    PubMed

    Kim, Ha-Yeon; Jackson, Daniel; Adhikari, Koushik; Riner, Cliff; Sanchez-Brambila, Gabriela

    2017-10-01

    A consumer study was conducted to evaluate preferences in Vidalia onions, and define consumer acceptability thresholds for commonly analyzed flavor compounds associated with pungency. Two varieties of Vidalia onions (Plethora and Sapelo Sweet) were grown at 3 fertilizer application rates (37.5 and 0; 134.5 and 59.4; and 190 and 118.8 kg/ha of nitrogen and sulfur, respectively), creating 6 treatments with various flavor attributes to use in the study. Bulb soluble solids, sugars, pyruvic acid, lachrymatory factor (LF; propanethial S-oxide), and methyl thiosulfinate (MT) content were determined and compared to sensory responses for overall liking, intensity of the sharp/pungent/burning sensation (SPB), and intent to buy provided by 142 consumers. Onion pyruvate, LF, MT, and sugar content increased as fertilization rate increased, regardless of onion variety. Consumer responses showed participants preferred onions with low SPB, which correlated positively to lower pyruvate, LF and MT concentrations, but showed no relationship to total sugars in the onion bulb. Regression analyses revealed that the majority of consumers (≥55%) found the flavor of Vidalia onions acceptable when the concentrations of LF, pyruvic acid, and MT within the bulbs were below 2.21, 4.83, and 0.43 nmol/mL, respectively. These values will support future studies aimed at identifying the optimal cultivation practices for production of sweet Vidalia onions, and can serve as an industry benchmark for quality control, thus ensuring the flavor of Vidalia onions will be acceptable to the majority of consumers. This study identified the relationship between consumer preferences and commonly analyzed flavor compounds in Vidalia onions, and established thresholds for these compounds at concentrations which the majority of consumers will find desirable. These relationships and thresholds will support future research investigating how cultural practices impact onion quality, and can be used to assist growers in variety selection decisions. In addition, this information will provide a benchmark to Vidalia onion producers for quality control of the sweet onions produced, ensuring that the onions are consistently of a desired quality, thereby increasing consumer's reliability in the Vidalia onion brand. © 2017 Institute of Food Technologists®.

  19. Measuring Attitudes toward Acceptable and Unacceptable Parenting Practices

    ERIC Educational Resources Information Center

    Budd, Karen S.; Behling, Steven; Li, Yan; Parikshak, Sangeeta; Gershenson, Rachel A.; Feuer, Rachel; Danko, Christina M.

    2012-01-01

    This study investigated the properties of a new rating instrument, the Parenting Questionnaire (PQ), designed to measure attitudes about acceptable and unacceptable parenting practices. In Study 1, subject matter experts representing culturally diverse psychologists, parents, and college students were consulted to identify 110 items receiving high…

  20. Understanding the Cu-Zn brass alloys using a short-range-order cluster model: significance of specific compositions of industrial alloys

    PubMed Central

    Hong, H. L.; Wang, Q.; Dong, C.; Liaw, Peter K.

    2014-01-01

    Metallic alloys show complex chemistries that are not yet understood so far. It has been widely accepted that behind the composition selection lies a short-range-order mechanism for solid solutions. The present paper addresses this fundamental question by examining the face-centered-cubic Cu-Zn α-brasses. A new structural approach, the cluster-plus-glue-atom model, is introduced, which suits specifically for the description of short-range-order structures in disordered systems. Two types of formulas are pointed out, [Zn-Cu12]Zn1~6 and [Zn-Cu12](Zn,Cu)6, which explain the α-brasses listed in the American Society for Testing and Materials (ASTM) specifications. In these formulas, the bracketed parts represent the 1st-neighbor cluster, and each cluster is matched with one to six 2nd-neighbor Zn atoms or with six mixed (Zn,Cu) atoms. Such a cluster-based formulism describes the 1st- and 2nd-neighbor local atomic units where the solute and solvent interactions are ideally satisfied. The Cu-Ni industrial alloys are also explained, thus proving the universality of the cluster-formula approach in understanding the alloy selections. The revelation of the composition formulas for the Cu-(Zn,Ni) industrial alloys points to the common existence of simple composition rules behind seemingly complex chemistries of industrial alloys, thus offering a fundamental and practical method towards composition interpretations of all kinds of alloys. PMID:25399835

  1. Understanding the Cu-Zn brass alloys using a short-range-order cluster model: Significance of specific compositions of industrial alloys

    DOE PAGES

    Hong, H. L.; Wang, Q.; Dong, C.; ...

    2014-11-17

    Metallic alloys show complex chemistries that are not yet understood so far. It has been widely accepted that behind the composition selection lies a short-range-order mechanism for solid solutions. The present paper addresses this fundamental question by examining the face-centered-cubic Cu-Zn α-brasses. A new structural approach, the cluster-plus-glue-atom model, is introduced, which suits specifically for the description of short-range-order structures in disordered systems. Two types of formulas are pointed out, [Zn-Cu 12]Zn 1~6 and [Zn-Cu 12](Zn,Cu) 6, which explain the α-brasses listed in the American Society for Testing and Materials (ASTM) specifications. In these formulas, the bracketed parts represent themore » 1 st-neighbor cluster, and each cluster is matched with one to six 2 nd-neighbor Zn atoms or with six mixed (Zn,Cu) atoms. Such a cluster-based formulism describes the 1 st- and 2 nd-neighbor local atomic units where the solute and solvent interactions are ideally satisfied. The Cu-Ni industrial alloys are also explained, thus proving the universality of the cluster-formula approach in understanding the alloy selections. As a result, the revelation of the composition formulas for the Cu-(Zn,Ni) industrial alloys points to the common existence of simple composition rules behind seemingly complex chemistries of industrial alloys, thus offering a fundamental and practical method towards composition interpretations of all kinds of alloys.« less

  2. Trades of dangers: a study of asbestos industry transfer cases in Asia.

    PubMed

    Choi, Yeyong; Lim, Sinye; Paek, Domyung

    2013-03-01

    In a study of asbestos industry transfers in Asia, we examined the transfer of health and safety measures at the time of industry transfer and resulting health outcomes thereafter. Field surveys were conducted in Japan, Germany, Indonesia, and South Korea over a 5 year period beginning in 2007. The surveys involved interviews and field assessments of health and safety conditions. Even when there were transfers of entire engineering plant processes, we observed that the health and safety measures that should have accompanied the transfer, including technical capacities of risk assessment and management, regulatory protection, and cultural practices, were not actually transferred. According to work environment assessment records, there were differences in airborne asbestos levels of approximately 5-6 fibers/cc between the exporting and importing sides of the transfer. This amounted to a 10 years of time delay in comparable health and safety conditions. These differences resulted in repeated adverse health consequences at each factory operation site. Dangerous transfers of asbestos industry technology have occurred repeatedly over the years with the result that Asia has become the largest consumer of asbestos in the world. No effective internationally accepted safety measures have been introduced in the region. The study results support the need for both improved public awareness and international cooperation, such as sharing of substitute material technologies by the exporting countries, and provide the rationale for the creation of an Asian fund for asbestos victims. Copyright © 2012 Wiley Periodicals, Inc.

  3. Global trends in milk quality: implications for the Irish dairy industry

    PubMed Central

    2009-01-01

    The quality of Irish agricultural product will become increasingly important with the ongoing liberalisation of international trade. This paper presents a review of the global and Irish dairy industries; considers the impact of milk quality on farm profitability, food processing and human health, examines global trends in quality; and explores several models that are successfully being used to tackle milk quality concerns. There is a growing global demand for dairy products, fuelled in part by growing consumer wealth in developing countries. Global dairy trade represents only 6.2% of global production and demand currently outstrips supply. Although the Irish dairy industry is small by global standards, approximately 85% of annual production is exported annually. It is also the world's largest producer of powdered infant formula. Milk quality has an impact on human health, milk processing and on-farm profitability. Somatic cell count (SCC) is a key measure of milk quality, with a SCC not exceeding 400,000 cells/ml (the EU milk quality standard) generally accepted as the international export standard. There have been ongoing improvements in milk quality among both established and emerging international suppliers. A number of countries have developed successful industry-led models to tackle milk quality concerns. Based on international experiences, it is likely that problems with effective translation of knowledge to practice, rather than incomplete knowledge per se, are the more important constraints to national progress towards improved milk quality. PMID:22081986

  4. A European Competence Framework for Industrial Pharmacy Practice in Biotechnology.

    PubMed

    Atkinson, Jeffrey; Crowley, Pat; De Paepe, Kristien; Gennery, Brian; Koster, Andries; Martini, Luigi; Moffat, Vivien; Nicholson, Jane; Pauwels, Gunther; Ronsisvalle, Giuseppe; Sousa, Vitor; van Schravendijk, Chris; Wilson, Keith

    2015-07-29

    The PHAR-IN (" Competences for industrial pharmacy practice in biotechnology ") looked at whether there is a difference in how industrial employees and academics rank competences for practice in the biotechnological industry. A small expert panel consisting of the authors of this paper produced a biotechnology competence framework by drawing up an initial list of competences then ranking them in importance using a three-stage Delphi process. The framework was next evaluated and validated by a large expert panel of academics ( n = 37) and industrial employees ( n = 154). Results show that priorities for industrial employees and academics were similar. The competences for biotechnology practice that received the highest scores were mainly in: "Research and Development", '"Upstream" and "Downstream" Processing', "Product development and formulation", "Aseptic processing", "Analytical methodology", "Product stability", and "Regulation". The main area of disagreement was in the category "Ethics and drug safety" where academics ranked competences higher than did industrial employees.

  5. 15 CFR 734.8 - Information resulting from fundamental research.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... applied research in science and engineering, where the resulting information is ordinarily published and... research and from industrial development, design, production, and product utilization, the results of which... the university or its researchers accept (at the request, for example, of an industrial sponsor) other...

  6. 15 CFR 734.8 - Information resulting from fundamental research.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... applied research in science and engineering, where the resulting information is ordinarily published and... research and from industrial development, design, production, and product utilization, the results of which... accept (at the request, for example, of an industrial sponsor) other restrictions on publication of...

  7. 46 CFR 58.60-13 - Inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU) § 58.60-13 Inspection. An industrial system is accepted by the Coast Guard if the inspector finds— (a) The system meets...

  8. 46 CFR 58.60-13 - Inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU) § 58.60-13 Inspection. An industrial system is accepted by the Coast Guard if the inspector finds— (a) The system meets...

  9. 46 CFR 58.60-13 - Inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU) § 58.60-13 Inspection. An industrial system is accepted by the Coast Guard if the inspector finds— (a) The system meets...

  10. 46 CFR 58.60-13 - Inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU) § 58.60-13 Inspection. An industrial system is accepted by the Coast Guard if the inspector finds— (a) The system meets...

  11. 46 CFR 58.60-13 - Inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU) § 58.60-13 Inspection. An industrial system is accepted by the Coast Guard if the inspector finds— (a) The system meets...

  12. 26 CFR 509.105 - Industrial and commercial profits.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... sales promotion, the orders being transmitted to Switzerland for acceptance, then the profits arising... 26 Internal Revenue 19 2010-04-01 2010-04-01 false Industrial and commercial profits. 509.105 Section 509.105 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED...

  13. Acceptance procedures for dense-graded mixes

    DOT National Transportation Integrated Search

    2001-03-01

    Recent literature related to acceptance procedures for dense-graded mixtures is summarized. Current state of practice and development of acceptance procedures are reviewed. Many agencies are reducing the number of process control-related parameters i...

  14. Data sharing and the evolving role of statisticians.

    PubMed

    Manamley, Nick; Mallett, Steve; Sydes, Matthew R; Hollis, Sally; Scrimgeour, Alison; Burger, Hans Ulrich; Urban, Hans-Joerg

    2016-07-08

    Greater transparency and, in particular, sharing of clinical study reports and patient level data for further research is an increasingly important topic for the pharmaceutical and biotechnology industry and other organisations who sponsor and conduct clinical research as well as academic researchers and patient advocacy groups. Statisticians are ambassadors for data sharing and are central to its success. They play an integral role in data sharing discussions within their companies and also externally helping to shape policy and processes while providing input into practical solutions to aid data sharing. Data sharing is generating changes in the required profile for statisticians in the pharmaceutical and biotechnology industry, as well as academic institutions and patient advocacy groups. Successful statisticians need to possess many qualities required in today's pharmaceutical environment such as collaboration, diplomacy, written and oral skills and an ability to be responsive; they are also knowledgeable when debating strategy and analytical techniques. However, increasing data transparency will require statisticians to evolve and learn new skills and behaviours during their career which may not have been an accepted part of the traditional role. Statisticians will move from being the gate-keepers of data to be data facilitators. To adapt successfully to this new environment, the role of the statistician is likely to be broader, including defining new responsibilities that lie beyond the boundaries of the traditional role. Statisticians should understand how data transparency can benefit them and the potential strategic advantage it can bring and be fully aware of the pharmaceutical and biotechnology industry commitments to data transparency and the policies within their company or research institute in addition to focusing on reviewing requests and provisioning data. Data transparency will evolve the role of statisticians within the pharmaceutical and biotechnology industry, academia and research bodies to a level which may not have been an accepted part of their traditional role or career. In the future, skills will be required to manage challenges arising from data sharing; statisticians will need strong scientific and statistical guiding principles for reanalysis and supplementary analyses based on researchers' requests, have enhanced consultancy skills, in particular the ability to defend good statistical practice in the face of criticism and the ability to critique methods of analysis. Statisticians will also require expertise in data privacy regulations, data redaction and anonymisation and be able to assess the probability of re-identification, an ability to understand analyses conducted by researchers and recognise why such analyses may propose different results compared to the original analyses. Bringing these skills to the implementation of data sharing and interpretation of the results will help to maximise the value of shared data while guarding against misleading conclusions.

  15. Fabricating the "Southern Belle": Assessing the Role of Imported Material Culture in the Confederacy

    NASA Astrophysics Data System (ADS)

    Schwalbe, Emily A.

    2017-10-01

    Confederate society was dependent on a rigidly defined hierarchy that assigned roles and appropriate behavior based on race, gender, and wealth. White, wealthy, southern women were dependent on material culture as a socially acceptable means of self-fashioning and making their status public. The Union naval blockade threatened this practice by preventing Confederate markets from accessing imported, status-affirming goods. The industry of blockade running rose to fill this need, often controversially prioritizing cargo space for civilian, luxury products over necessities for the military. This article examines the artifact assemblages of blockade runner sites off the coasts of Wilmington, North Carolina and Charleston, South Carolina through a theoretical framework of agency and costly signaling to make assessments about Confederate identity during the Civil War.

  16. Nuclear power: Siting and safety

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Openshaw, S.

    1986-01-01

    By 2030, half, or even two-thirds, of all electricity may be generated by nuclear power. Major reactor accidents are still expected to be rare occurrences, but nuclear safety is largely a matter of faith. Terrorist attacks, sabotage, and human error could cause a significant accident. Reactor siting can offer an additional, design-independent margin of safety. Remote geographical sites for new plants would minimize health risks, protect the industry from negative changes in public opinion concerning nuclear energy, and improve long-term public acceptance of nuclear power. U.K. siting practices usually do not consider the contribution to safety that could be obtainedmore » from remote sites. This book discusses the present trends of siting policies of nuclear power and their design-independent margin of safety.« less

  17. Prevention concept in industry: improvement in occupational safety and health protection--an empirical study.

    PubMed

    Ramsauer, F

    2001-12-01

    This prevention concept offers a contribution to the expansion of the set of instruments for occupational safety and health protection within workplace prevention. The concept involves the multilateral analysis of work conditions. The utilized instruments include a strategy group, a survey, a health issue round table, and an analysis of work demands, and lead to synergy effects at the results level. Employees are drawn into the analysis of work conditions and workplace design solutions for the improvement of the work situation. The prevention concept was tested in a large company and its application established in practice. It was accepted by all participants, and the comparison with the previous situation (defined only through the analysis of work demands) demonstrated a significant improvement in health protection.

  18. An odor flux model for cattle feedlots

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ormerod, R.J.

    1994-12-31

    Odor nuisance associated with cattle feedlots has been an issue of major interest and concern to regulators, rural communities and the beef industry in Australia over the past decade. Methods of assessing the likely impacts of new feedlots on community odor exposure are still being developed, but in the past few years much has been learnt about the processes of odor generation, flux and dispersion as well as the acceptability of feedlot odor to exposed communities. This paper outlines a model which simulates the complex physical and chemical processes leading to odor emissions in a simple and practical framework. Themore » model, named BULSMEL, has been developed as a response to regulatory requirements for quantitative assessments of odor impact. It will continue to be refined as more data are gathered.« less

  19. The ``writing on the cosmic wall'': Is there a straightforward explanation of the cosmic microwave background?

    NASA Astrophysics Data System (ADS)

    Fahr, H. J.; Zönnchen, J. H.

    2018-04-01

    Confederate society was dependent on a rigidly defined hierarchy that assigned roles and appropriate behavior based on race, gender, and wealth. White, wealthy, southern women were dependent on material culture as a socially acceptable means of self-fashioning and making their status public. The Union naval blockade threatened this practice by preventing Confederate markets from accessing imported, status-affirming goods. The industry of blockade running rose to fill this need, often controversially prioritizing cargo space for civilian, luxury products over necessities for the military. This article examines the artifact assemblages of blockade runner sites off the coasts of Wilmington, North Carolina and Charleston, South Carolina through a theoretical framework of agency and costly signaling to make assessments about Confederate identity during the Civil War.

  20. A modular approach for automated sample preparation and chemical analysis

    NASA Technical Reports Server (NTRS)

    Clark, Michael L.; Turner, Terry D.; Klingler, Kerry M.; Pacetti, Randolph

    1994-01-01

    Changes in international relations, especially within the past several years, have dramatically affected the programmatic thrusts of the U.S. Department of Energy (DOE). The DOE now is addressing the environmental cleanup required as a result of 50 years of nuclear arms research and production. One major obstacle in the remediation of these areas is the chemical determination of potentially contaminated material using currently acceptable practices. Process bottlenecks and exposure to hazardous conditions pose problems for the DOE. One proposed solution is the application of modular automated chemistry using Standard Laboratory Modules (SLM) to perform Standard Analysis Methods (SAM). The Contaminant Analysis Automation (CAA) Program has developed standards and prototype equipment that will accelerate the development of modular chemistry technology and is transferring this technology to private industry.

  1. SEATCA Tobacco Industry Interference Index: a tool for measuring implementation of WHO Framework Convention on Tobacco Control Article 5.3

    PubMed Central

    Assunta, Mary; Dorotheo, E Ulysses

    2016-01-01

    Objective To measure the implementation of WHO Framework Convention on Tobacco Control (FCTC) Article 5.3 at country level using a new Tobacco Industry Interference Index and to report initial results using this index in seven Southeast Asian countries. Methods Score sheet based on WHO FCTC Article 5.3 Guidelines sent to correspondents in seven Southeast Asian countries, using a scoring system designed with the help of tobacco control experts and validated through focused group discussions. Results The seven countries ranked from the lowest level of interference to the highest are Brunei, Thailand, Lao PDR, Cambodia, Philippines, Malaysia and Indonesia. Countries that face high levels of unnecessary interaction with the tobacco industry also face high levels of tobacco industry influence in policy development. Most governments do not allow any tobacco industry representatives on their delegation to sessions of the Conference of the Parties or its subsidiary bodies nor accept their sponsorship for delegates, but most governments still accept or endorse offers of assistance from the tobacco industry in implementing tobacco control policies. Most governments also receive tobacco industry contributions (monetary or in kind) or endorse industry corporate social responsibility activities. Governments do not have a procedure for disclosing interactions with the tobacco industry, but Lao PDR, Philippines and Thailand have instituted measures to prevent or reduce industry interference. Conclusions This Tobacco Industry Interference Index, based on the WHO FCTC Article 5.3 Guidelines, is a useful advocacy tool for identifying both progress and gaps in national efforts at implementing WHO FCTC Article 5.3. PMID:25908597

  2. 7 CFR 58.220 - Drying systems.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... filter system shall comply with the applicable requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying Systems. The filtering system shall be cleaned or component parts replaced... shall comply with the requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying...

  3. 7 CFR 58.220 - Drying systems.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... filter system shall comply with the applicable requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying Systems. The filtering system shall be cleaned or component parts replaced... shall comply with the requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying...

  4. 7 CFR 58.220 - Drying systems.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... filter system shall comply with the applicable requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying Systems. The filtering system shall be cleaned or component parts replaced... shall comply with the requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying...

  5. 7 CFR 58.220 - Drying systems.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... filter system shall comply with the applicable requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying Systems. The filtering system shall be cleaned or component parts replaced... shall comply with the requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying...

  6. Evaluation of Subsurface Engineered Barriers at Waste Sites

    DTIC Science & Technology

    1998-08-01

    28 3-4 MATRIX FOR EVALUATING BARRIER CQA/CQC AGAINST ACCEPTABLE INDSUTRY PRACTICES...STANDARDS................................................................. 66 4-2 MATRIX FOR EVALUATING CAP AGAINST ACCEPTABLE INDSUTRY PRACTICES...stated previously, the most widely used technique for containment is the soil-bentonite slurry wall. It is typically the most economical , utilizes low

  7. Qualification testing and electrical measurement experience: A manufacturer's view

    NASA Astrophysics Data System (ADS)

    Arnett, J. C.; Cooley, J. E.; Wingert, T. L.

    1983-11-01

    ARCO Solar's experiences as a participant in an industry-utility-government environmental qualification team examining photovoltaic devices are discussed. Included is an assessment of the applicability, completeness and appropriateness of the testing procedures and of the acceptance criteria for megawatt-sized procurements for utilities. Like the stand-alone users, the utility industry is interested in obtaining low costs, but additional concerns exist related to reliability and durability, safety, grounding and overall system criteria including performance prediction (related to output power acceptance testing), power quality and dispatchability. For purposes of this first major purchase of photovoltaic modules and panels by the utility industry, there was a carry-over of the JPL specifications. The need exists for futher development, assessement, and selection of qualification and testing standards and evaluation criteria specifically addressing these additional concerns for utility-connected PV power-plant applications.

  8. Qualification testing and electrical measurement experience: A manufacturer's view

    NASA Technical Reports Server (NTRS)

    Arnett, J. C.; Cooley, J. E.; Wingert, T. L.

    1983-01-01

    ARCO Solar's experiences as a participant in an industry-utility-government environmental qualification team examining photovoltaic devices are discussed. Included is an assessment of the applicability, completeness and appropriateness of the testing procedures and of the acceptance criteria for megawatt-sized procurements for utilities. Like the stand-alone users, the utility industry is interested in obtaining low costs, but additional concerns exist related to reliability and durability, safety, grounding and overall system criteria including performance prediction (related to output power acceptance testing), power quality and dispatchability. For purposes of this first major purchase of photovoltaic modules and panels by the utility industry, there was a carry-over of the JPL specifications. The need exists for futher development, assessement, and selection of qualification and testing standards and evaluation criteria specifically addressing these additional concerns for utility-connected PV power-plant applications.

  9. 16 CFR 18.0 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE NURSERY INDUSTRY § 18.0 Definitions. Industry products. As used in this part, the term industry products includes all types of trees... greenhouse plants solely for inside culture or use and annual vegetable plants. Industry members. Any person...

  10. 16 CFR 18.0 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE NURSERY INDUSTRY § 18.0 Definitions. Industry products. As used in this part, the term industry products includes all types of trees... greenhouse plants solely for inside culture or use and annual vegetable plants. Industry members. Any person...

  11. A flexible architecture for advanced process control solutions

    NASA Astrophysics Data System (ADS)

    Faron, Kamyar; Iourovitski, Ilia

    2005-05-01

    Advanced Process Control (APC) is now mainstream practice in the semiconductor manufacturing industry. Over the past decade and a half APC has evolved from a "good idea", and "wouldn"t it be great" concept to mandatory manufacturing practice. APC developments have primarily dealt with two major thrusts, algorithms and infrastructure, and often the line between them has been blurred. The algorithms have evolved from very simple single variable solutions to sophisticated and cutting edge adaptive multivariable (input and output) solutions. Spending patterns in recent times have demanded that the economics of a comprehensive APC infrastructure be completely justified for any and all cost conscious manufacturers. There are studies suggesting integration costs as high as 60% of the total APC solution costs. Such cost prohibitive figures clearly diminish the return on APC investments. This has limited the acceptance and development of pure APC infrastructure solutions for many fabs. Modern APC solution architectures must satisfy the wide array of requirements from very manual R&D environments to very advanced and automated "lights out" manufacturing facilities. A majority of commercially available control solutions and most in house developed solutions lack important attributes of scalability, flexibility, and adaptability and hence require significant resources for integration, deployment, and maintenance. Many APC improvement efforts have been abandoned and delayed due to legacy systems and inadequate architectural design. Recent advancements (Service Oriented Architectures) in the software industry have delivered ideal technologies for delivering scalable, flexible, and reliable solutions that can seamlessly integrate into any fabs" existing system and business practices. In this publication we shall evaluate the various attributes of the architectures required by fabs and illustrate the benefits of a Service Oriented Architecture to satisfy these requirements. Blue Control Technologies has developed an advance service oriented architecture Run to Run Control System which addresses these requirements.

  12. Acceptance procedures for dense-graded mixes : literature review.

    DOT National Transportation Integrated Search

    2001-03-01

    Recent literature related to acceptance procedures for dense-graded mixtures is summarized. Current state of practice and development of acceptance procedures are reviewed. Many agencies are reducing the number of process control-related parameters i...

  13. Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Derivations and Verification of Plans. Volume 1

    NASA Technical Reports Server (NTRS)

    Johnson, Kenneth L.; White, K, Preston, Jr.

    2012-01-01

    The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques. This recommended procedure would be used as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. This document contains the outcome of the assessment.

  14. 40 CFR 63.843 - Emission limits for existing sources.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) The emission capture system shall be installed and operated to meet the generally accepted engineering standards for minimum exhaust rates as published by the American Conference of Governmental Industrial Hygienists in Chapters 3 and 5 of “Industrial Ventilation: A Handbook of Recommended Practice” (incorporated...

  15. 40 CFR 63.843 - Emission limits for existing sources.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) The emission capture system shall be installed and operated to meet the generally accepted engineering standards for minimum exhaust rates as published by the American Conference of Governmental Industrial Hygienists in Chapters 3 and 5 of “Industrial Ventilation: A Handbook of Recommended Practice” (incorporated...

  16. 40 CFR 63.843 - Emission limits for existing sources.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) The emission capture system shall be installed and operated to meet the generally accepted engineering standards for minimum exhaust rates as published by the American Conference of Governmental Industrial Hygienists in Chapters 3 and 5 of “Industrial Ventilation: A Handbook of Recommended Practice” (incorporated...

  17. 40 CFR 63.843 - Emission limits for existing sources.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) The emission capture system shall be installed and operated to meet the generally accepted engineering standards for minimum exhaust rates as published by the American Conference of Governmental Industrial Hygienists in Chapters 3 and 5 of “Industrial Ventilation: A Handbook of Recommended Practice” (incorporated...

  18. 40 CFR 63.843 - Emission limits for existing sources.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) The emission capture system shall be installed and operated to meet the generally accepted engineering standards for minimum exhaust rates as published by the American Conference of Governmental Industrial Hygienists in Chapters 3 and 5 of “Industrial Ventilation: A Handbook of Recommended Practice” (incorporated...

  19. Contribution of student involvement in production/service unit and experience of industry practices to entrepreneurial attitude and the impact entrepeneurship readiness of vocational high school students of great Malang

    NASA Astrophysics Data System (ADS)

    Mukminna, Halimahtus; Isnandar, Muladi

    2017-09-01

    Purpose of this research was to determine the contribution of student involvement in production/ service unit (X1), experience of industry practices (X2), and entrepreneurial attitude (Y) towards readiness entrepreneurship (Z) of vocational student regional Malang. The design of the study using a quantitative approach. The samples used as many as 130 respondents. Instruments used for collecting data in the form of questionnaires. Data analysis included descriptive and test of hypothesis. The result showed: that the description of data on the level of student involvement in production/ service unit, experience of industry practices, entrepreneurial attitude and entrepreneurship readiness in the high category. The contribution student involvement in production/ service unit of entrepreneurial attitude of 10.6%. The contribution experience of industry practices of entrepreneurial attitude of 17.4%. The contribution student involvement in production/ service unit and experience of industry practices simultaneously to entrepreneurial attitude of 44.1%. The contribution student involvement in production/ service unit of readiness entrepreneurship of 4%. The contribution experience of industry practices of readiness entrepreneurship of 5%. The contribution entrepreneurial attitude of readiness entrepreneurship of 16%. Finally, the contribution student involvement in production/ service unit, experience of industry practices, and entrepreneurial attitude simultaneously to readiness entrepreneurship of 50.3%.

  20. Deep anisotropic ICP plasma etching designed for high-volume MEMS manufacturing

    NASA Astrophysics Data System (ADS)

    Yu, Keven; Feldbaum, Michael; Pandhumsoporn, Tam; Gadgil, Prashant

    1999-08-01

    ICP plasma etching is gaining widespread acceptance as an enabling micromachining technology for advanced MEMS fabrication. Whereas this technology has shown a capability of delivering multiple novel applications for R and D, its acceptance by industry for high volume production has been limited. This acceptance into production will only occur when the plasma etching equipment with this technology offers the device performance, throughput, reliability, and uptime criteria required by a production facility. The design of the plasma etcher using this technology and the process capability it consequently delivers, has significant implications in making this a reality. Alcatel has been supplying such a technology to this MEMS industry for over 5 years and in the interim has evolved its product and process to make this technology production worthy. Alcatel's next generation etcher, the Alcatel 601E, offers multiple advantages to MEMS manufacturers in realizing their production goals.

  1. Sustainable development of new energy vehicle industry in China

    NASA Astrophysics Data System (ADS)

    Li, Mingyang; Li, Lingzhi

    2018-03-01

    The new energy vehicle industry in China has developed rapidly in recent years, but there is still a gap in core technology. Some problems are brought the adverse effect on it, such as imperfect infrastructures, imperfect systems in market access and regulatory, single channels for marketing and low acceptance among consumer. Based on the development of new energy vehicle industry home and abroad, this paper puts forward some problems of new energy vehicles industry in China, then offers some feasible suggestions.

  2. Pathfinding on the Continuous Journey: Total Quality Management (TQM) in the Department of Defense

    DTIC Science & Technology

    1993-04-01

    failures. Wide acceptance in industry will support its widening acceptance in government. Business schools are beginning to move into research on and...offered as excuse for failure) 5. Obsolescence in schools. Decries the emphasis on finance and creative accounting by America’s business schools 6. Reliance

  3. Implementation of Industrial Work Practice management at vocational high school

    NASA Astrophysics Data System (ADS)

    Widodo, Joko; Samsudi, Sunyoto

    2017-03-01

    The purpose of this study was to develop a management model of entrepreneurship-based Industrial Work Practice (Prakerin) at Vocational High School. This research was planned for three years under Research and Development design. The respondents were public and private Vocational High Schools in Semarang, Salatiga and District of Demak, Central Java, Indonesia. Data were collected through interviews, questionnaires, observation, and documentation. The data were analyzed qualitatively and quantitatively. Preliminary study shows that the implementation of Industrial Work Practice at Vocational High School, which has been carried out, was only to prepare the graduates to become an employee of the industry instead of entrepreneur. Further study is needed to develop a management model of entrepreneurship-based Industrial Work Practice at Vocational High School.

  4. Students Perception towards the Implementation of Computer Graphics Technology in Class via Unified Theory of Acceptance and Use of Technology (UTAUT) Model

    NASA Astrophysics Data System (ADS)

    Binti Shamsuddin, Norsila

    Technology advancement and development in a higher learning institution is a chance for students to be motivated to learn in depth in the information technology areas. Students should take hold of the opportunity to blend their skills towards these technologies as preparation for them when graduating. The curriculum itself can rise up the students' interest and persuade them to be directly involved in the evolvement of the technology. The aim of this study is to see how deep is the students' involvement as well as their acceptance towards the adoption of the technology used in Computer Graphics and Image Processing subjects. The study will be towards the Bachelor students in Faculty of Industrial Information Technology (FIIT), Universiti Industri Selangor (UNISEL); Bac. In Multimedia Industry, BSc. Computer Science and BSc. Computer Science (Software Engineering). This study utilizes the new Unified Theory of Acceptance and Use of Technology (UTAUT) to further validate the model and enhance our understanding of the adoption of Computer Graphics and Image Processing Technologies. Four (4) out of eight (8) independent factors in UTAUT will be studied towards the dependent factor.

  5. ASME Material Challenges for Advanced Reactor Concepts

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Piyush Sabharwall; Ali Siahpush

    2013-07-01

    This study presents the material Challenges associated with Advanced Reactor Concept (ARC) such as the Advanced High Temperature Reactor (AHTR). ACR are the next generation concepts focusing on power production and providing thermal energy for industrial applications. The efficient transfer of energy for industrial applications depends on the ability to incorporate cost-effective heat exchangers between the nuclear heat transport system and industrial process heat transport system. The heat exchanger required for AHTR is subjected to a unique set of conditions that bring with them several design challenges not encountered in standard heat exchangers. The corrosive molten salts, especially at highermore » temperatures, require materials throughout the system to avoid corrosion, and adverse high-temperature effects such as creep. Given the very high steam generator pressure of the supercritical steam cycle, it is anticipated that water tube and molten salt shell steam generators heat exchanger will be used. In this paper, the ASME Section III and the American Society of Mechanical Engineers (ASME) Section VIII requirements (acceptance criteria) are discussed. Also, the ASME material acceptance criteria (ASME Section II, Part D) for high temperature environment are presented. Finally, lack of ASME acceptance criteria for thermal design and analysis are discussed.« less

  6. 16 CFR 18.8 - Deception as to origin or source of industry products.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Deception as to origin or source of industry... GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is an unfair or deceptive act or practice to sell, offer for sale, or advertise an industry product by...

  7. 16 CFR 18.8 - Deception as to origin or source of industry products.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Deception as to origin or source of industry... GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is an unfair or deceptive act or practice to sell, offer for sale, or advertise an industry product by...

  8. 16 CFR 18.8 - Deception as to origin or source of industry products.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Deception as to origin or source of industry... GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is an unfair or deceptive act or practice to sell, offer for sale, or advertise an industry product by...

  9. 16 CFR 18.8 - Deception as to origin or source of industry products.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Deception as to origin or source of industry... GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is an unfair or deceptive act or practice to sell, offer for sale, or advertise an industry product by...

  10. Do We Believe the Tobacco Industry Lied to Us? Association with Smoking Behavior in a Military Population

    ERIC Educational Resources Information Center

    Klesges, Robert C.; Sherrill-Mittleman, Deborah A.; Debon, Margaret; Talcott, G. Wayne; Vanecek, Robert J.

    2009-01-01

    Despite the dangers of smoking, tobacco companies continue to impede tobacco control efforts through deceptive marketing practices. Media campaigns that expose these practices have been effective in advancing anti-industry attitudes and reducing smoking initiation among young people, yet the association between knowledge of industry practices and…

  11. All inclusive benchmarking.

    PubMed

    Ellis, Judith

    2006-07-01

    The aim of this article is to review published descriptions of benchmarking activity and synthesize benchmarking principles to encourage the acceptance and use of Essence of Care as a new benchmarking approach to continuous quality improvement, and to promote its acceptance as an integral and effective part of benchmarking activity in health services. The Essence of Care, was launched by the Department of Health in England in 2001 to provide a benchmarking tool kit to support continuous improvement in the quality of fundamental aspects of health care, for example, privacy and dignity, nutrition and hygiene. The tool kit is now being effectively used by some frontline staff. However, use is inconsistent, with the value of the tool kit, or the support clinical practice benchmarking requires to be effective, not always recognized or provided by National Health Service managers, who are absorbed with the use of quantitative benchmarking approaches and measurability of comparative performance data. This review of published benchmarking literature, was obtained through an ever-narrowing search strategy commencing from benchmarking within quality improvement literature through to benchmarking activity in health services and including access to not only published examples of benchmarking approaches and models used but the actual consideration of web-based benchmarking data. This supported identification of how benchmarking approaches have developed and been used, remaining true to the basic benchmarking principles of continuous improvement through comparison and sharing (Camp 1989). Descriptions of models and exemplars of quantitative and specifically performance benchmarking activity in industry abound (Camp 1998), with far fewer examples of more qualitative and process benchmarking approaches in use in the public services and then applied to the health service (Bullivant 1998). The literature is also in the main descriptive in its support of the effectiveness of benchmarking activity and although this does not seem to have restricted its popularity in quantitative activity, reticence about the value of the more qualitative approaches, for example Essence of Care, needs to be overcome in order to improve the quality of patient care and experiences. The perceived immeasurability and subjectivity of Essence of Care and clinical practice benchmarks means that these benchmarking approaches are not always accepted or supported by health service organizations as valid benchmarking activity. In conclusion, Essence of Care benchmarking is a sophisticated clinical practice benchmarking approach which needs to be accepted as an integral part of health service benchmarking activity to support improvement in the quality of patient care and experiences.

  12. Resistance to "Developmentally Appropriate Practice": Teachers, Graduate Students, and Parents Speak Out.

    ERIC Educational Resources Information Center

    O'Brien, Leigh M.

    Although developmentally appropriate practice (DAP) has gained widespread acceptance within early childhood education, it is not accepted by all. This study examined resistance to the DAP concept among: (1) Head Start and other early childhood teachers; (2) child caregivers; (3) African-American mothers; and (4) masters students in early childhood…

  13. Sibling Family Practices: Guidelines for Healthy Boundaries

    ERIC Educational Resources Information Center

    Johnson, Toni Cavanagh; Huang, Bevan Emma; Simpson, Pippa M.

    2009-01-01

    A questionnaire was given to 500 mental health and child welfare professionals asking for maximum acceptable ages for siblings to engage jointly in certain family practices related to hygiene, affection, and privacy. A large proportion of respondents felt it was never acceptable for siblings to take showers together (40%), kiss on the mouth (37%),…

  14. 40 CFR 63.1595 - List of definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., gauge wells) that are necessary for operation, inspection, maintenance, and repair of the treatment unit... emitted (fe monthly) using fe monthly = ΣE/ΣL. HAP means hazardous air pollutant(s). Industrial POTW means a POTW that accepts a waste stream regulated by an industrial NESHAP and provides treatment and...

  15. Using Mobile Device for Learning: From Students' Perspective

    ERIC Educational Resources Information Center

    Suki, Norazah Mohd; Suki, Norbayah Mohd

    2011-01-01

    This study aims to examine students' acceptance of mobile technology usage for learning. A questionnaire designed with five open-ended questions was distributed to 20 students from the Faculty of Industrial Art and Design Technology of Unisel (Universiti Industri Selangor), Malaysia. Results construes that students were not keen on m-learning…

  16. 75 FR 22031 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-27

    ..., including induction and fluorescent. Non-HID technologies are achieving market penetration in lighting... the electromagnetic (magnetic) type. The industry-accepted life of magnetic ballasts is 50,000 hours... analysis for today's proposed determination, DOE only considered magnetic ballasts because they are the...

  17. Using a peanut drying monitoring system to estimate costs of nonbeneficial dryer operation

    USDA-ARS?s Scientific Manuscript database

    Presently, the peanut industry lacks a commercially available, industry-accepted solution for real-time kernel moisture content determination during peanut drying. Samples of unshelled peanuts are extracted from the semitrailer by an operator periodically, and the samples have to be cleaned and shel...

  18. Chapter J: Issues and challenges in the application of geostatistics and spatial-data analysis to the characterization of sand-and-gravel resources

    USGS Publications Warehouse

    Hack, Daniel R.

    2005-01-01

    Sand-and-gravel (aggregate) resources are a critical component of the Nation's infrastructure, yet aggregate-mining technologies lag far behind those of metalliferous mining and other sectors. Deposit-evaluation and site-characterization methodologies are antiquated, and few serious studies of the potential applications of spatial-data analysis and geostatistics have been published. However, because of commodity usage and the necessary proximity of a mine to end use, aggregate-resource exploration and evaluation differ fundamentally from comparable activities for metalliferous ores. Acceptable practices, therefore, can reflect this cruder scale. The increasing use of computer technologies is colliding with the need for sand-and-gravel mines to modernize and improve their overall efficiency of exploration, mine planning, scheduling, automation, and other operations. The emergence of megaquarries in the 21st century will also be a contributing factor. Preliminary research into the practical applications of exploratory-data analysis (EDA) have been promising. For example, EDA was used to develop a linear-regression equation to forecast freeze-thaw durability from absorption values for Lower Paleozoic carbonate rocks mined for crushed aggregate from quarries in Oklahoma. Applications of EDA within a spatial context, a method of spatial-data analysis, have also been promising, as with the investigation of undeveloped sand-and-gravel resources in the sedimentary deposits of Pleistocene Lake Bonneville, Utah. Formal geostatistical investigations of sand-and-gravel deposits are quite rare, and the primary focus of those studies that have been completed is on the spatial characterization of deposit thickness and its subsequent effect on ore reserves. A thorough investigation of a gravel deposit in an active aggregate-mining area in central Essex, U.K., emphasized the problems inherent in the geostatistical characterization of particle-size-analysis data. Beyond such factors as common drilling methods jeopardizing the accuracy of the size-distribution curve, the application of formal geostatistical principles has other limitations. Many of the variables used in evaluating gravel deposits, including such sedimentologic parameters as sorting and such United Soil Classification System parameters as gradation coefficient, are nonadditive. Also, uniform sampling methods, such as drilling, are relatively uncommon, and sampling is generally accomplished by a combination of boreholes, water-well logs, test pits, trenches, stratigraphic columns from exposures, and, possibly, some geophysical cross sections. When evaluated in consideration of the fact that uniform mining blocks are also uncommon in practice, subsequent complexities in establishment of the volume/variance relation are inevitable. Several approaches exist to confront the limitations of geostatistical methods in evaluating sand-and-gravel deposits. Initially, we must acknowledge the practical requirements of the aggregate industry, as well as the limitations of the data collected by that industry, as a function of what the industry requires at the practical level, and consider that broader acceptance of formal geostatistics may require modifications of typical exploration and sampling protocols. Future investigations should utilize data from the full spectrum of sand-and-gravel deposits (flood plain, glacial, catastrophic flood, and marine), integrate such other disci plines as sedimentology and geophysics into the research, develop commodity-specific approaches to nonadditive variables, and include the results of comparative drilling.

  19. Locating Anomalies in Complex Data Sets Using Visualization and Simulation

    NASA Technical Reports Server (NTRS)

    Panetta, Karen

    2001-01-01

    The research goals are to create a simulation framework that can accept any combination of models written at the gate or behavioral level. The framework provides the ability to fault simulate and create scenarios of experiments using concurrent simulation. In order to meet these goals we have had to fulfill the following requirements. The ability to accept models written in VHDL, Verilog or the C languages. The ability to propagate faults through any model type. The ability to create experiment scenarios efficiently without generating every possible combination of variables. The ability to accept adversity of fault models beyond the single stuck-at model. Major development has been done to develop a parser that can accept models written in various languages. This work has generated considerable attention from other universities and industry for its flexibility and usefulness. The parser uses LEXX and YACC to parse Verilog and C. We have also utilized our industrial partnership with Alternative System's Inc. to import vhdl into our simulator. For multilevel simulation, we needed to modify the simulator architecture to accept models that contained multiple outputs. This enabled us to accept behavioral components. The next major accomplishment was the addition of "functional fault models". Functional fault models change the behavior of a gate or model. For example, a bridging fault can make an OR gate behave like an AND gate. This has applications beyond fault simulation. This modeling flexibility will make the simulator more useful for doing verification and model comparison. For instance, two or more versions of an ALU can be comparatively simulated in a single execution. The results will show where and how the models differed so that the performance and correctness of the models may be evaluated. A considerable amount of time has been dedicated to validating the simulator performance on larger models provided by industry and other universities.

  20. A Study on How Industrial Pharmacists Rank Competences for Pharmacy Practice: A Case for Industrial Pharmacy Specialization

    PubMed Central

    Atkinson, Jeffrey; De Paepe, Kristien; Sánchez Pozo, Antonio; Rekkas, Dimitrios; Volmer, Daisy; Hirvonen, Jouni; Bozic, Borut; Skowron, Agnieska; Mircioiu, Constantin; Marcincal, Annie; Koster, Andries; Wilson, Keith; van Schravendijk, Chris

    2016-01-01

    This paper looks at the way in which industrial pharmacists rank the fundamental competences for pharmacy practice. European industrial pharmacists (n = 135) ranked 68 competences for practice, arranged into 13 clusters of two types (personal and patient care). Results show that, compared to community pharmacists (n = 258), industrial pharmacists rank competences centering on research, development and production of drugs higher, and those centering on patient care lower. Competences centering on values, communication skills, etc. were ranked similarly by the two groups of pharmacists. These results are discussed in the light of the existence or not of an “industrial pharmacy” specialization. PMID:28970386

  1. Charged Slurry Droplet Research

    DTIC Science & Technology

    1989-02-20

    IEEE/IAS annual meeting, Denver, CO, Sept. 28 - Oct. 3, 1986, p.1434. Accepted for publication IEEE Transactions on Industry Applications. 6. Lord...34Analysis of the Description of Evaporating Charged Droplets, IEEE Transactions on Industry Applications, IA-19, 771, 1983. 9. H.M.A. Elghazaly, G.S.P. Castle...34Analysis of the Instability of Evaporating Charged Liquid Drops", IEEE Transactions on Industry Applications, IA-22, 892, 1986. 10. H.M.A

  2. The stakeholder preference for best management practices in the Three Gorges Reservoir Region.

    PubMed

    Qiu, Jiali; Shen, Zhenyao; Chen, Lei; Xie, Hui; Sun, Chengchun; Huang, Qin

    2014-11-01

    A qualitative analysis of in-depth interviews with 92 farmers and 42 policy managers in Wuxi County, the Three Gorges Reservoir Region, was conducted to identify stakeholder preferences for alternative best management practices (BMPs) and to determine the factors that affect their acceptance. Policy manager support for most of the practices was relatively stronger than support by farmers, except for the grade stabilization structure (GSS), hillside ditch (HD) and constructed wetland alternative, owing to their perceptions of soil benefits, economic advantages and environmental advantages. Farmers opposed those practices that occupied cultivated lands or changed the conventional planting methods, such as field border, conservation tillage (CT) and contour buffer strips. They tended to accept the BMPs with off-farm pollution reduction, such as GSS, riparian forest buffer and HD, and the BMPs associated with soil benefits, such as nutrient management and Terrace. The result that almost all respondents did not accept CT differed from reports in the existing literature. There is a significant correlation between the acceptance of some BMPs and the townships where the farmers lived (P ≤ 0.05). The environmental conditions and social factors would affect farmer support for BMPs, including local soil conditions, farming methods, economic income, education level and age. The economic advantages of the BMPs were the main motivation for farmers to accept the practices. Furthermore, intensive education efforts, financial incentives or economic subsidies may promote the adoption of the BMPs in our study area.

  3. The Stakeholder Preference for Best Management Practices in the Three Gorges Reservoir Region

    NASA Astrophysics Data System (ADS)

    Qiu, Jiali; Shen, Zhenyao; Chen, Lei; Xie, Hui; Sun, Chengchun; Huang, Qin

    2014-11-01

    A qualitative analysis of in-depth interviews with 92 farmers and 42 policy managers in Wuxi County, the Three Gorges Reservoir Region, was conducted to identify stakeholder preferences for alternative best management practices (BMPs) and to determine the factors that affect their acceptance. Policy manager support for most of the practices was relatively stronger than support by farmers, except for the grade stabilization structure (GSS), hillside ditch (HD) and constructed wetland alternative, owing to their perceptions of soil benefits, economic advantages and environmental advantages. Farmers opposed those practices that occupied cultivated lands or changed the conventional planting methods, such as field border, conservation tillage (CT) and contour buffer strips. They tended to accept the BMPs with off-farm pollution reduction, such as GSS, riparian forest buffer and HD, and the BMPs associated with soil benefits, such as nutrient management and Terrace. The result that almost all respondents did not accept CT differed from reports in the existing literature. There is a significant correlation between the acceptance of some BMPs and the townships where the farmers lived ( P ≤ 0.05). The environmental conditions and social factors would affect farmer support for BMPs, including local soil conditions, farming methods, economic income, education level and age. The economic advantages of the BMPs were the main motivation for farmers to accept the practices. Furthermore, intensive education efforts, financial incentives or economic subsidies may promote the adoption of the BMPs in our study area.

  4. A European Competence Framework for Industrial Pharmacy Practice in Biotechnology

    PubMed Central

    Atkinson, Jeffrey; Crowley, Pat; De Paepe, Kristien; Gennery, Brian; Koster, Andries; Martini, Luigi; Moffat, Vivien; Nicholson, Jane; Pauwels, Gunther; Ronsisvalle, Giuseppe; Sousa, Vitor; van Schravendijk, Chris; Wilson, Keith

    2015-01-01

    The PHAR-IN (“Competences for industrial pharmacy practice in biotechnology”) looked at whether there is a difference in how industrial employees and academics rank competences for practice in the biotechnological industry. A small expert panel consisting of the authors of this paper produced a biotechnology competence framework by drawing up an initial list of competences then ranking them in importance using a three-stage Delphi process. The framework was next evaluated and validated by a large expert panel of academics (n = 37) and industrial employees (n = 154). Results show that priorities for industrial employees and academics were similar. The competences for biotechnology practice that received the highest scores were mainly in: “Research and Development”,‘“Upstream” and “Downstream” Processing’, “Product development and formulation”,“Aseptic processing”, “Analytical methodology”, “Product stability”, and “Regulation”. The main area of disagreement was in the category “Ethics and drug safety” where academics ranked competences higher than did industrial employees. PMID:28975907

  5. Constructing Relationships between Science and Practice in the Written Science Communication of the Washington State Wine Industry

    ERIC Educational Resources Information Center

    Szymanski, Erika Amethyst

    2016-01-01

    Even as deficit model science communication falls out of favor, few studies question how written science communication constructs relationships between science and industry. Here, I investigate how textual microprocesses relate scientific research to industry practice in the Washington State wine industry, helping (or hindering) winemakers and…

  6. Political Projects and Micro-Practices of Globalising Education: Building an International Education Industry in New Zealand

    ERIC Educational Resources Information Center

    Lewis, Nicolas

    2011-01-01

    This paper examines the framing of globalising education as an industry in New Zealand. It traces the development of industry institutions to promote and regulate cross-border educational relations and practices. The paper argues that the making of a national "international education industry" has framed entrepreneurial education…

  7. 12 CFR 621.2 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... accepted accounting principles means that body of conventions, rules, and procedures necessary to define accepted accounting practices at a particular time, as promulgated by the Financial Accounting Standards... profession in the United States. Generally accepted accounting principles include not only broad guidelines...

  8. Incorporation of soybean by-product okara and inulin in a probiotic soy yoghurt: texture profile and sensory acceptance.

    PubMed

    Bedani, Raquel; Campos, Marina M S; Castro, Inar A; Rossi, Elizeu A; Saad, Susana M I

    2014-01-15

    This study evaluated the effect of inulin and okara flour on textural and sensory properties of probiotic soy yoghurt (SY) throughout 28 days of storage at 4 °C. Employing a 2(2) design, four formulations of SY produced from soymilk and fermented with an ABT-4 culture (Lactobacillus acidophilus La-5, Bifidobacterium animalis Bb-12 and Streptococcus thermophilus) were studied: SY-C (control); SY-I (with inulin); SY-O (with okara); SY-IO (with inulin + okara). The addition of okara and the refrigerated storage led to significant differences in the instrumental texture parameters of SY (P < 0.05). Inulin and okara did not affect SY sensory acceptability (P > 0.05), but there was a tendency for higher scores in the presence of inulin. On the other hand, the storage period, particularly at 21 days, was unfavourable regarding the acceptance of the different SY. The results showed that the addition of okara flour and the storage were significant factors to increase firmness of the soy yoghurts. SY acceptability was not affected by the incorporation of inulin or okara. These results suggest that okara, discarded as industrial waste, may be used in probiotic soy yoghurt, helping to increase the nutritional and functional properties without altering its acceptability. © 2013 Society of Chemical Industry.

  9. Aquaculture and environmental stewardship: Milford shellfish biology seminar—1991

    NASA Astrophysics Data System (ADS)

    Blogoslawski, Walter J.

    1992-07-01

    For the past 11 years the annual Shellfish Biology Seminar at Milford CT has provided a unique forum for aquaculture scientists and industry officials to exchange information about estuaries facing increased pollution problems, especially Long Island Sound and the Great South Bay. Because these two areas are so rich in productivity and diversity, fish and shellfish farmers utilize their waters, shellfish beds, and shore land for hatcheries and grow-out facilities. These individuals seek better management of the coastal estuarine environment and its resources, providing a working example of environmental stewardship. In aquaculture, good science is required to understand the complex variables and interaction of estuarine currents, tides, temperature, and cycles of reproduction. Aquaculturists are beginning to understand the need for specific nutrients and how the wastes of one species can be utilized for enhanced production of another species. Over the years, this meeting has formed an amalgam of both the aquaculture industry and research scientists where both groups foster mutual environmental concern. Science is able to focus on the theoretical aspects of pollutant damage. while the aquaculture industry is able to define the problem and need for assistance to eliminate pollutants from their crops—shellfish and finfish. Overfishing is not an issue at these meetings, as the group accepts the damage already done to wild resources and seeks new technologies to grow food sources under controlled and stable market conditions. Therefore, it could be said that the seminar serves as a meeting ground where the theoretical knowledge of scientific study finds practical application in the industry and is fueled by the needs of that industry. This ideal blend of the two groups produces better management of the resource and a safer environment—the goal of stewardship.

  10. Use of physiologically relevant biopharmaceutics tools within the pharmaceutical industry and in regulatory sciences: Where are we now and what are the gaps?

    PubMed

    Flanagan, Talia; Van Peer, Achiel; Lindahl, Anders

    2016-08-25

    Regulatory interactions are an important part of the drug development and licensing process. A survey on the use of biopharmaceutical tools for regulatory purposes has been carried out within the industry community of the EU project OrBiTo within Innovative Medicines Initiative (IMI). The aim was to capture current practice and experience in using in vitro and in silico biopharmaceutics tools at various stages of development, what barriers exist or are perceived, and to understand the current gaps in regulatory biopharmaceutics. The survey indicated that biorelevant dissolution testing and physiologically based modelling and simulation are widely applied throughout development to address a number of biopharmaceutics issues. However, data from these in vitro and in silico predictive biopharmaceutics tools are submitted to regulatory authorities far less often than they are used for internal risk assessment and decision making. This may prevent regulators from becoming familiar with these tools and how they are applied in industry, and limits the opportunities for biopharmaceutics scientists working in industry to understand the acceptability of these tools in the regulatory environment. It is anticipated that the advanced biopharmaceutics tools and understanding delivered in the next years by OrBiTo and other initiatives in the area of predictive tools will also be of value in the regulatory setting, and provide a basis for more informed and confident biopharmaceutics risk assessment and regulatory decision making. To enable the regulatory potential of predictive biopharmaceutics tools to be realized, further scientific dialogue is needed between industry, regulators and scientists in academia, and more examples need to be published to demonstrate the applicability of these tools. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Linear and nonlinear schemes applied to pitch control of wind turbines.

    PubMed

    Geng, Hua; Yang, Geng

    2014-01-01

    Linear controllers have been employed in industrial applications for many years, but sometimes they are noneffective on the system with nonlinear characteristics. This paper discusses the structure, performance, implementation cost, advantages, and disadvantages of different linear and nonlinear schemes applied to the pitch control of the wind energy conversion systems (WECSs). The linear controller has the simplest structure and is easily understood by the engineers and thus is widely accepted by the industry. In contrast, nonlinear schemes are more complicated, but they can provide better performance. Although nonlinear algorithms can be implemented in a powerful digital processor nowadays, they need time to be accepted by the industry and their reliability needs to be verified in the commercial products. More information about the system nonlinear feature is helpful to simplify the controller design. However, nonlinear schemes independent of the system model are more robust to the uncertainties or deviations of the system parameters.

  12. Nozzle Initiative Industry Advisory Committee on Standardization of Carbon-Phenolic Test Methods and Specifications

    NASA Technical Reports Server (NTRS)

    Bull, William B. (Compiler); Pinoli, Pat C. (Compiler); Upton, Cindy G. (Compiler); Day, Tony (Compiler); Hill, Keith (Compiler); Stone, Frank (Compiler); Hall, William B.

    1994-01-01

    This report is a compendium of the presentations of the 12th biannual meeting of the Industry Advisory Committee under the Solid Propulsion Integrity Program. A complete transcript of the welcoming talks is provided. Presentation outlines and overheads are included for the other sessions: SPIP Overview, Past, Current and Future Activity; Test Methods Manual and Video Tape Library; Air Force Developed Computer Aided Cure Program and SPC/TQM Experience; Magneto-Optical mapper (MOM), Joint Army/NASA program to assess composite integrity; Permeability Testing; Moisture Effusion Testing by Karl Fischer Analysis; Statistical Analysis of Acceptance Test Data; NMR Phenolic Resin Advancement; Constituent Testing Highlights on the LDC Optimization Program; Carbon Sulfur Study, Performance Related Testing; Current Rayon Specifications and Future Availability; RSRM/SPC Implementation; SRM Test Methods, Delta/Titan/FBM/RSRM; and Open Forum on Performance Based Acceptance Testing -- Industry Experience.

  13. SEATCA Tobacco Industry Interference Index: a tool for measuring implementation of WHO Framework Convention on Tobacco Control Article 5.3.

    PubMed

    Assunta, Mary; Dorotheo, E Ulysses

    2016-05-01

    To measure the implementation of WHO Framework Convention on Tobacco Control (FCTC) Article 5.3 at country level using a new Tobacco Industry Interference Index and to report initial results using this index in seven Southeast Asian countries. Score sheet based on WHO FCTC Article 5.3 Guidelines sent to correspondents in seven Southeast Asian countries, using a scoring system designed with the help of tobacco control experts and validated through focused group discussions. The seven countries ranked from the lowest level of interference to the highest are Brunei, Thailand, Lao PDR, Cambodia, Philippines, Malaysia and Indonesia. Countries that face high levels of unnecessary interaction with the tobacco industry also face high levels of tobacco industry influence in policy development. Most governments do not allow any tobacco industry representatives on their delegation to sessions of the Conference of the Parties or its subsidiary bodies nor accept their sponsorship for delegates, but most governments still accept or endorse offers of assistance from the tobacco industry in implementing tobacco control policies. Most governments also receive tobacco industry contributions (monetary or in kind) or endorse industry corporate social responsibility activities. Governments do not have a procedure for disclosing interactions with the tobacco industry, but Lao PDR, Philippines and Thailand have instituted measures to prevent or reduce industry interference. This Tobacco Industry Interference Index, based on the WHO FCTC Article 5.3 Guidelines, is a useful advocacy tool for identifying both progress and gaps in national efforts at implementing WHO FCTC Article 5.3. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  14. Tricks and Clicks: How Low-Cost Carriers Ply Their Trade Through Self-Service Websites

    NASA Astrophysics Data System (ADS)

    Barry, Chris; Torres, Ann M.

    Ethics on the Internet has been a widely debated topic in recent years covering issues that range from privacy to security to fraud. Little, however, has been written on more subtle ethical questions, such as the exploitation of web technologies to inhibit or avoid customer service. Increasingly some firms are using websites to create distance between them and their customer base in specific areas of their operations, while simultaneously developing excellence in sales transaction committal via self-service. This chapter takes a magnifying glass with an ethical lens to one sector - the low-cost, web-based, self-service airline industry, specifically in Ireland. It is noted that the teaching of information systems development (ISD) and, for the most part its practice, assumes ethicality. Similarly, marketing courses focus on satisfying customer needs more effectively and efficiently within the confines of an acceptable ethos. This chapter observes that while these business disciplines are central to the success of self-service websites, there is a disconnect between the normative view and the actuality of practice.

  15. Exercise is medicine: some cautionary remarks in principle as well as in practice.

    PubMed

    Neville, Ross D

    2013-08-01

    On the basis of extensive research on the relationship between physical activity, exercise and health, as well as strong support from policymakers and practitioners, the "Exercise is Medicine" initiative has become something of a linchpin in the agenda for modern healthcare reform and reflects a broader acceptance that the philosophy of health politics must shift from social engineering to performativity. However, in spite of the avowed commitment to encouraging individuals to take on a more reflexive relation to their health, it remains unclear as to whether an initiative such as this is, unambiguously, a good thing. In this paper, a number of cautionary remarks are made with respect to "Exercise is Medicine" in principle as well as in practice. Firstly, it is argued that equating exercise with medicine is to equate it with a definition of and relation to the body to which it is not entirely akin. And secondly, it is argued that any proposed alignment of the fitness and healthcare industries needs further critical examination, a realigning of interests, and a thorough reconsideration of their suitability of fit.

  16. Innovative Mobile Smart Photonic Dimensional, Color and Spectral Measurement Engineering

    NASA Astrophysics Data System (ADS)

    Hofmann, Dr Dietrich, Prof; Dittrich (B. Eng. , Paul-Gerald; Höfner (B. Eng. , Dieter; Kraus, Daniel

    2015-02-01

    Aim of the paper is the demonstration of a paradigm shift in dimensional, color and spectral measurements in industry, biology/medicine, farming/environmental protection and security, as well as in education and training: Measurement engineering and quality assurance become mobile, modular and smart. Smartpads, smartphones and smartwatches (smartcomps) in combination with innovative hardware apps (hwapps) and conventional software apps (swapps) are fundamental enablers for the transformation from conventional stationary working places towards innovative mobile working places with in-field measurements and point-of-care (POC) diagnostics. Furthermore mobile open online courses (MOOCs) are transforming the study habits. Practical examples for the application of innovative photonic micro dimensiometers, colorimeters and spectrometers will be given. The innovative approach opens so far untapped enormous markets for measurement science, engineering, applications, education and training. These innovative working conditions will be fast accepted due to their convenience, reliability and affordability. A highly visible advantage of smartcomps is the huge number of their real distribution, their worldwide connectivity via Internet and cloud services, the standardized interfaces like USB and HDMI and the experienced capabilities of their users for practical operations, obtained with their private smartcomps.

  17. Remote Patient Monitoring in IBD: Current State and Future Directions.

    PubMed

    Atreja, Ashish; Otobo, Emamuzo; Ramireddy, Karthik; Deorocki, Allyssa

    2018-03-07

    Mobile apps are now increasingly used in conjunction with telemedicine and wearable devices to support remote patient monitoring (RPM). The goal of this paper is to review the available evidence and assess the scope of RPM integration into standard practices for care and management of chronic disease in general and, more specifically, inflammatory bowel disease (IBD). RPM has been associated with improvements in health outcomes and indicators across a broad range of chronic diseases. However, there is limited data on the effectiveness of RPM in IBD care. From the emerging literature and body of research, we found promising results about the feasibility of integrating RPM in IBD care and RPM's capacity to support IBD improvement in key process and outcome metrics. Concerns regarding privacy and provider acceptability have limited the mass integration of RPM to date. However, with the healthcare industry's move toward value-based population care and the advent of novel payment models for RPM reimbursement, the adoption of RPM into standard IBD care practices will likely increase as the technology continues to improve and become a mainstream tool for healthcare delivery in the near future.

  18. Issues and concerns in nanotech product development and its commercialization.

    PubMed

    Kaur, Indu Pal; Kakkar, Vandita; Deol, Parneet Kaur; Yadav, Monika; Singh, Mandeep; Sharma, Ikksheta

    2014-11-10

    The revolutionary and ubiquitous nature of nanotechnology has fetched it a considerable attention in the past few decades. Even though its enablement and application to various sectors including pharmaceutical drug development is increasing with the enormous government aided funding for nanotechnology-based products, however the parallel commercialization of these systems has not picked up a similar impetus. The technology however does address the unmet needs of pharmaceutical industry, including the reformulation of drugs to improve their solubility, bioavailability or toxicity profiles as observed from the wide array of high-quality research publications appearing in various scientific journals and magazines. Based on our decade-long experience in the field of nanotech-based drug delivery systems and extensive literature survey, we perceive that the major hiccups to the marketing of these nanotechnology products can be categorized as 1) inadequate regulatory framework; 2) lack of support and acceptance by the public, practicing physician, and industry; 3) developmental considerations like scalability, reproducibility, characterization, quality control, and suitable translation; 4) toxicological issues and safety profiles; 5) lack of available multidisciplinary platforms; and, 6) poor intellectual property protection. The present review dwells on these issues elaborating the trends followed by the industry, regulatory role of the USFDA and their implication, and the challenges set forth for a successful translation of these products from the lab and different clinical phases to the market. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Conception of the first magnetic resonance imaging contrast agents: a brief history.

    PubMed

    de Haën, C

    2001-08-01

    About 20 years ago, a technological innovation process started that eventually led to the affirmation of magnetic resonance imaging (MRI) contrast agents, which are used today in about 25% of all MRI procedures, as medical diagnostic tools. The process began with exploration of various technical possibilities and the conception in the years 1981 to 1982 of two types of agents (soluble paramagnetic chelates and protection colloid-stabilized colloidal particle solutions of magnetite) that eventually found embodiments in commercially available products. The pioneering products that eventually reached the market were gadopentetate dimeglumine (Magnevist, Schering AG) and the ferumoxides (Endorem, Guerbet SA; or Ferridex , Berlex Laboratories Inc.). The history of the conception phase of the technology is reconstructed here, focusing on the social dynamics rather than on technological aspects. In the period 1981 to 1982, a number of independent inventors from industry and academia conceived of water-soluble paramagnetic chelates and protection colloid-stabilized colloidal solutions of small particles of magnetite, both of acceptable tolerability, as contrast agents for MRI. Priorities on patents conditioned the further course of events. The analyzed history helps in understanding the typical roles of different institutions in technological innovation. The foundation of MRI contrast agent technology in basic science clearly was laid in academia. During the conception of practical products, industry assumed a dominant role. Beginning with the radiological evaluation of candidate products, the collaboration between industry and academia became essential.

  20. The sequestration switch: removing industrial CO2 by direct ocean absorption.

    PubMed

    Ametistova, Lioudmila; Twidell, John; Briden, James

    2002-04-22

    This review paper considers direct injection of industrial CO2 emissions into the mid-water oceanic column below 500 m depth. Such a process is a potential candidate for switching atmospheric carbon emissions directly to long term sequestration, thereby relieving the intermediate atmospheric burden. Given sufficient research justification, the argument is that harmful impact in both the Atmosphere and the biologically rich upper marine layer could be reduced. The paper aims to estimate the role that active intervention, through direct ocean CO2 storage, could play and to outline further research and assessment for the strategy to be a viable option for climate change mitigation. The attractiveness of direct ocean injection lies in its bypassing of the Atmosphere and upper marine region, its relative permanence, its practicability using existing technologies and its quantification. The difficulties relate to the uncertainty of some fundamental scientific issues, such as plume dynamics, lowered pH of the exposed waters and associated ecological impact, the significant energy penalty associated with the necessary engineering plant and the uncertain costs. Moreover, there are considerable uncertainties regarding related international marine law. Development of the process would require acceptance of the evidence for climate change, strict requirements for large industrial consumers of fossil fuel to reduce CO2 emissions into the Atmosphere and scientific evidence for the overall beneficial impact of ocean sequestration.

  1. 75 FR 70011 - Guidance for Industry, Mammography Quality Standards Act Inspectors, and Food and Drug...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-16

    ... label to assist that office in processing your request, or fax your request to 301-847-8149. See the.... Clarifying that original or lossless compressed digital image files may be acceptable for record transfer; 3... be acceptable to FDA; 4. Deleting the question and answer dealing with image labeling; 5. Modifying...

  2. Feasibility, acceptability and effectiveness of an online alternative to face-to-face consultation in general practice: a mixed-methods study of webGP in six Devon practices

    PubMed Central

    Carter, Mary; Fletcher, Emily; Sansom, Anna; Warren, Fiona C; Campbell, John L

    2018-01-01

    Objectives To evaluate the feasibility, acceptability and effectiveness of webGP as piloted by six general practices. Methods Mixed-methods evaluation, including data extraction from practice databases, general practitioner (GP) completion of case reports, patient questionnaires and staff interviews. Setting General practices in NHS Northern, Eastern and Western Devon Clinical Commissioning Group’s area approximately 6 months after implementing webGP (February–July 2016). Participants Six practices provided consultations data; 20 GPs completed case reports (regarding 61 e-consults); 81 patients completed questionnaires; 5 GPs and 5 administrators were interviewed. Outcome measures Attitudes and experiences of practice staff and patients regarding webGP. Results WebGP uptake during the evaluation was small, showing no discernible impact on practice workload. The completeness of cross-sectional data on consultation workload varied between practices. GPs judged 41/61 (72%) of webGP requests to require a face-to-face or telephone consultation. Introducing webGP appeared to be associated with shifts in responsibility and workload between practice staff and between practices and patients. 81/231 patients completed a postal survey (35.1% response rate). E-Consulters were somewhat younger and more likely to be employed than face-to-face respondents. WebGP appeared broadly acceptable to patients regarding timeliness and quality/experience of care provided. Similar problems were presented by all respondents. Both groups appeared equally familiar with other practice online services; e-consulters were somewhat more likely to have used them. From semistructured staff interviews, it appeared that, while largely acceptable within practice, introducing e-consults had potential for adverse interactions with pre-existing practice systems. Conclusions There is potential to assess the impact of new systems on consultation patterns by extracting routine data from practice databases. Staff and patients noticed subtle changes to responsibilities associated with online options. Greater uptake requires good communication between practice and patients, and organisation of systems to avoid conflicts and misuse. Further research is required to evaluate the full potential of webGP in managing practice workload. PMID:29449293

  3. Resourcefulness Training for Women Dementia Caregivers: Acceptability and Feasibility of Two Methods.

    PubMed

    Zauszniewski, Jaclene A; Lekhak, Nirmala; Napoleon, Betty; Morris, Diana L

    2016-01-01

    Almost 10 million women in the United States are caregivers for elders with dementia and many experience extreme stress that compromises their health. Acceptable and feasible interventions to teach them resourcefulness skills for managing stress may improve their health and facilitate continued caregiving. This study examined two commonly used methods for practicing skills taught during resourcefulness training (RT) to women caregivers of elders with dementia (n=63): journaling and digital voice recording. It also explored whether providing caregivers a choice between the two methods made it more acceptable or feasible. Qualitative and quantitative data were collected before, during, and after RT. Caregivers who recorded used more words (M=5446) but recorded fewer days (M=17) than those who journaled (M=2792 words and M=27 days). Similar concerns in relation to time management and practice method were expressed by women caregivers irrespective of practice method (journal versus recorder) or random versus choice condition. While journaling was more frequent than recording, more words were expressed during recordings. Perceived stress and depressive symptoms were unrelated to the number of practice days or word counts, suggesting RT acceptability and feasibility even for highly stressed or depressed caregivers. Because intervention feasibility is important for RT effectiveness testing, alternatives to the journaling and recording methods for practicing RT skills should be considered.

  4. The "We Card" program: tobacco industry "youth smoking prevention" as industry self-preservation.

    PubMed

    Apollonio, Dorie E; Malone, Ruth E

    2010-07-01

    The "We Card" program is the most ubiquitous tobacco industry "youth smoking prevention" program in the United States, and its retailer materials have been copied in other countries. The program's effectiveness has been questioned, but no previous studies have examined its development, goals, and uses from the tobacco industry's perspective. On the basis of our analysis of tobacco industry documents released under the 1998 Master Settlement Agreement, we concluded that the We Card program was undertaken for 2 primary purposes: to improve the tobacco industry's image and to reduce regulation and the enforcement of existing laws. Policymakers should be cautious about accepting industry self-regulation at face value, both because it redounds to the industry's benefit and because it is ineffective.

  5. Public attitudes toward practice by medical students: a nationwide survey in Japan.

    PubMed

    Murata, Kyoko; Sakuma, Mio; Seki, Susumu; Morimoto, Takeshi

    2014-01-01

    It is essential for medical students to interact directly with patients. However, patients may be reluctant to be seen by medical students in settings in which they may also be seen by senior staff. To understand patients' attitudes toward practice by medical students and consider the factors involved in obtaining patients' cooperation, we conducted a nationwide cross-sectional survey. We randomly selected 2,400 adult participants from all over Japan. Trained research assistants inquired about participants' experiences and attitudes toward practice by medical students using a questionnaire. We compared differences in attitudes between participants who were accepting of practice by medical students and those who were not, as well as differences between participants who had experienced practice by a medical student versus those who had not. A total of 1,109 (46%) participants were included in the study. Eleven percent (117/1109) of the participants had experienced practice by a medical student. One fourth of participants were accepting of practice by medical students, and experienced participants were significantly more likely to be accepting of practice by medical students than inexperienced participants (45% vs. 24%, p<.001). Impressions of practice by medical students among accepting participants with previous experiences included "polite," "kind," and "hard-working." Fifty-nine percent (637/1088) of participants indicated that they would request a senior staff member's supervision when being seen by a medical student. The present nationwide survey suggests that education emphasizing bedside manner may be effective in promoting patients' cooperation of medical students. In addition, providing information to patients about medical students and efforts to increase supervision during clinical clerkship should be emphasized to foster the public's cooperation.

  6. Knowledge, Attitudes Toward, and Acceptability of Genetic Modification among Western Balkan University Students of Life Sciences (AGREE Study).

    PubMed

    Veličković, Vladica; Jović, Marko; Nalić, Ena; Višnjić, Aleksandar; Radulović, Olivera; Šagrić, Čedomir; Ćirić, Milan

    2016-01-01

    There are still no data on the attitudes and acceptance of genetic modification (GM) food in European developing countries, such as the Western Balkan countries. The aim of the study was to assess the knowledge, attitudes, and acceptance of GM but also to shed light on the multifactorial process leading to acceptance of genetic modifications among Western Balkan students of life sciences. In this cross-sectional study, the final study population sample was composed of 1251 university students. The instrument for data collection was a questionnaire consisting of 49 items composed of 5 sections taken from the literature. Attitudes toward GM were analyzed by using Q-mode factor analysis and principal component analysis was run for the assessment of perception of personal health risks. The acceptability of GM was analyzed in binary probit models assessing the acceptability of GM products in different areas of application with Q models, sociodemographic variables, perception of personal health risks factors, respondents' knowledge about biotechnology, gender, and age as explanatory variables. This study demonstrated that students of life sciences supported the implementation of GM in industry and medicine production but not in food production. Their acceptance was most influenced by 3 out of 5 attitude models that were identified (p < 0.0001). Regarding the perception of personal health risks, the factor "credence risks" was seen as a negative predictor of acceptance of GM in industry and food production (p < 0.05). The main knowledge predictor of rejecting GM was misconception, whereas real knowledge had no impact (p < 0.0001). The AGREE study provided the first rough picture of the knowledge, attitudes, and acceptance of GM in this area. Given the target population, it could be expected that the general population's acceptance of all observed elements, especially knowledge, would be lower.

  7. Development of pre-consultation prevention summary and reminder sheets for patients: preliminary study of acceptability and sustainability.

    PubMed

    Frank, Oliver; Aylward, Paul; Stocks, Nigel

    2014-05-01

    Patients attending general practices receive about 60% of indicated preventive services. Patients do not know which preventive services are indicated for them and want their GPs to offer those services. Patients arriving for consultations in three general practices received individualised prevention summary sheets. Acceptability was assessed by patient survey. Sustainability was assessed by the number of sheets printed over time. Seventy-two percent of patients discussed the advice on their sheet in the consultation, and 89% wanted to receive the sheets in the future. Practices printed 8882 sheets in the 52 weeks from the start of the trial. This new intervention seems to be acceptable and sustainable in the Australian setting. It has the potential, therefore, to increase the delivery of preventive care in general practice. A larger trial is needed to demonstrate its effect on performance of preventive activities and on patient outcomes.

  8. The Exploration and Practice of Gradually Industrialization Model in Software Engineering Education: A Factual Instance of the Excellent Engineer Plan of China

    ERIC Educational Resources Information Center

    Liu, Shu; Ma, Peijun; Li, Dong

    2012-01-01

    The current education model and practices in the Higher education sector in China have been successful in educating students for academic excellence, for producing industry-linked and practice-oriented graduates, who could quickly fit into the industrial working environment, has been a problem. There is a big gap between the theoretical knowledge…

  9. Interpreting Industrial Practice in the Modern I-A Lab

    ERIC Educational Resources Information Center

    Johnston, W. L.

    1969-01-01

    A comparison is made between industrial plant practices and those taught or used in an industrial arts laboratory with emphasis on: (1) control of raw material, (2) space utilization, (3) production methods, (4) employee selection, and (5) product purpose. (GR)

  10. Industrial Relations and Firm Behavior: Informal Labor Practices in the West Coast Longshore Industry.

    ERIC Educational Resources Information Center

    Finlay, William

    1987-01-01

    Considers industrial relations policies and practices of stevedore firms in the West Coast longshore industry in terms of the social worker, worker-resource, and institutional theories. Subsidiary firms were more lenient in contract interpretation and more competitive in recruitment, supporting the worker-resource theory. Includes 2 tables and 33…

  11. Analytical Design of Terminally Guided Missiles.

    DTIC Science & Technology

    1980-01-02

    Equivalent Dominant Poles and Zeros Using Industrial Specifications," Trans. on Industrial Electronics and Control Instrumentation, Vol. IECI-26, No...The relaxation of the sampling period requirement and the flexibility of our new method facilitate the practical industrial implementation and...with the Guidance and Control Directorate, U.S. Army Missile Command, Redstone Arsenal, Alabama 35809. I. INTRODUCTION Most practical industrial circuits

  12. Shelf Life Extension of Tomato Paste Through Organoleptically Acceptable Concentration of Betel Leaf Essential Oil Under Accelerated Storage Environment.

    PubMed

    Basak, Suradeep

    2018-05-01

    This study was attempted with two objectives: (1) to find an acceptable concentration of betel leaf essential oil (BLEO) based on sensory evaluation that can be employed in tomato paste; (2) to evaluate the effect of the acceptable concentration of BLEO in the paste during accelerated storage under 89 ± 1.2% RH at 39 ± 1 °C. Linguistic data obtained from sensory evaluation of tomato paste treated with 4 different concentrations of BLEO were analyzed using fuzzy logic approach. The organoleptically acceptable concentration was determined to be 0.25 mg/g of BLEO in tomato paste. The effect of the selected concentration of BLEO on different physicochemical and microbial attributes of tomato paste during accelerated storage was studied. Untreated tomato paste was found to have 12% less total antioxidant capacity than treated paste at the end of storage. Based on a * /b * value in CIELAB color space, the BLEO treated paste efficiently extended the shelf life by 14 days with respect to untreated paste samples under accelerated storage conditions. BLEO comes with a tag contributing to green consumerism, and its application as food preservative is no less than a value addition to the product. Essential oil is considered to have promising potential as an alternative food preservative, and its use is practically possible if they could overcome the sensory barrier, while retaining the preservative potency. The importance of identifying the sensory attributes for commercial success of essential oil treated food product was considered in this study. It contributes to the potency of organoleptically acceptable concentration of BLEO in shelf life extension of tomato paste under accelerated storage conditions. At industrial level, the estimated shelf life of treated tomato paste can be increased by incorporating more hurdles alongside BLEO. © 2018 Institute of Food Technologists®.

  13. Oversight of fare collection practices : summary report

    DOT National Transportation Integrated Search

    1997-11-01

    This report document an oversight study of fare collection practices in the transit industry. The oversight was designed as an investigation of practices currently used in the transit industry to evaluate the impact of farebox revenue collection and ...

  14. 77 FR 66621 - Draft Guidance for Industry on Bioequivalence Recommendation for Lenalidomide Capsules; Availability

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-06

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2007-D-0433; (formerly Docket No. 2007D-0169)] Draft Guidance for Industry on Bioequivalence Recommendation for...) Acceptable fasting and fed bioequivalence studies on the 25 mg strength, (2) proportional similarity of the...

  15. Scale of harvesting by non-industrial private forest landowners

    Treesearch

    Melinda Vokoun; Gregory S. Amacher; David N. Wear

    2006-01-01

    We examine the intensity of harvesting decision by non-industrial landowners at the lowest price offer they deem acceptable, using a multiple bounded discrete choice stated preference approach that draws upon and connects two subfields of forestry, one identifying characteristics of landowners important to past harvesting or reforestation decisions, and another...

  16. 77 FR 63801 - Aqua-Leisure Industries, Inc., Provisional Acceptance of a Settlement Agreement and Order

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-17

    ... filed a Supplemental Full Report in which it reported that the Firm had received at least 28 consumer... millions of units sold, Aqua Leisure received only 6 consumer reports (including suspect reports) in 2004... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 13-C0001] Aqua-Leisure Industries, Inc...

  17. Emergency manual implementation: can brief simulation-based or staff trainings increase familiarity and planned clinical use?

    PubMed

    Goldhaber-Fiebert, Sara N; Lei, Vivian; Nandagopal, Kiruthiga; Bereknyei, Sylvia

    2015-05-01

    Emergency manuals (EMs)-context-relevant sets of cognitive aids such as crisis checklists-are useful tools to enhance perioperative patient care. Studies in high-hazard industries demonstrate that humans, regardless of expertise, do not optimally retrieve or deploy key knowledge under stress. EM use has been shown in both health care simulation studies and other industries to help expert teams effectively manage critical events. However, clinical adoption and use are still nascent in health care. Recognizing that training with, access to, and cultural acceptance of EMs can be vital elements for successful implementation, this study assessed the impact of a brief in situ operating room (OR) staff training program on familiarity with EMs and intention to use them during critical events. Nine 50-minute training sessions were held with OR staff as part of a broader perioperative EM implementation. Participants primarily included OR nurses and surgical technologists. The simulation-based in situ trainings included why and how to use EMs, familiarization with format, simulated scenarios of critical events, and debriefings. A retrospective pre-post survey was conducted to determine participants' levels of EM familiarity and intentions to use EMs clinically. The 126 trained OR staff self-reported increases in awareness of the EM (p < .01), familiarity with EM (p < .01), willingness to use for educational review (p < .01), and intention to use during critical events (p < .01). Participants rated the sessions highly and expressed interest in more opportunities to practice using EMs. Implementing institutions should not only provide EMs in accessible places in ORs but also incorporate training mechanisms to increase clinicians' familiarity, cultural acceptance, and planned clinical use.

  18. Knowledge management through the e-learning approach - a case study of online engineering courses

    NASA Astrophysics Data System (ADS)

    Aichouni, Mohamed; Benchicou, Soraya; Nehari, Dris

    2013-06-01

    Though it is universally accepted that the face-to-face approach is the best way for education and training, however, with the advent of the information and communication technologies (mainly the World Wide Web) it became possible to enhance further the methods we are using to teach our students and to share the teaching material within a broaden engineering, technical and business communities. This paper is dedicated to making a review of the basic concepts of knowledge management and e-learning and to show how these two modern concepts can be integrated into engineering education to produce knowledge, disseminate it and share it within virtual interest groups and networks of engineering students, academic teachers and industrial engineers and technicians and business managers. A practical case study will be presented and discussed.

  19. Definition of spacecraft standard interfaces by the NASA Space Assembly and Servicing Working Group (SASWG)

    NASA Technical Reports Server (NTRS)

    Radtke, Robert; Woolley, Charles; Arnold, Lana

    1993-01-01

    The purpose of the NASA Space Assembly and Servicing Working Group (SASWG) is to study enabling technologies for on-orbit spacecraft maintenance and servicing. One key technology required for effective space logistics activity is the development of standard spacecraft interfaces, including the 'Basic Set' defined by NASA, the U.S. Space Command, and industry panelists to be the following: (1) navigation aids; (2) grasping, berthing, and docking; and (3) utility connections for power, data, and fluids. Draft standards have been prepared and referred to professional standards organizations, including the AIAA, EIA, and SAE space standards committee. The objective of the SASWG is to support these committees with the technical expertise required to prepare standards, guidelines, and recommended practices which will be accepted by the ANSI and international standards organizations, including the ISO, IEC, and PASC.

  20. A Study on Optimal Sizing of Pipeline Transporting Equi-sized Particulate Solid-Liquid Mixture

    NASA Astrophysics Data System (ADS)

    Asim, Taimoor; Mishra, Rakesh; Pradhan, Suman; Ubbi, Kuldip

    2012-05-01

    Pipelines transporting solid-liquid mixtures are of practical interest to the oil and pipe industry throughout the world. Such pipelines are known as slurry pipelines where the solid medium of the flow is commonly known as slurry. The optimal designing of such pipelines is of commercial interests for their widespread acceptance. A methodology has been evolved for the optimal sizing of a pipeline transporting solid-liquid mixture. Least cost principle has been used in sizing such pipelines, which involves the determination of pipe diameter corresponding to the minimum cost for given solid throughput. The detailed analysis with regard to transportation of slurry having solids of uniformly graded particles size has been included. The proposed methodology can be used for designing a pipeline for transporting any solid material for different solid throughput.

  1. Research in pulsed power plasma physics

    NASA Astrophysics Data System (ADS)

    Hinshelwood, David; Rose, David

    1993-11-01

    The research was conducted in support of light-ion-driven inertial confinement fusion (ICF) for the Department of Energy (DOE), and nuclear weapon effects simulation (NWES) for the Defense Nuclear Agency (DNA). Accomplishments related to ion beams include: development of a practical backup approach to ion beam transport; the first studies of ion-beam interaction with a neutral gas; initial investigations of a promising industrial application of ion beam technology; and detailed theoretical evaluation of several different ion beam transport schemes. Major accomplishments relating to opening switches include: the first direct measurement of the electron density in an opening switch; detailed studies of switch conduction-time scaling; evaluation of several different switch plasma sources; and extensive studies of switch performance into diode loads, leading to the development of a new (and now generally accepted) model of switch behavior.

  2. Land and Law in Marijuana Country: Clean Capital, Dirty Money, and the Drug War's Rentier Nexus.

    PubMed

    Polson, Michael

    2013-11-01

    Despite its ongoing federal illegality, marijuana production has become a licit, or socially accepted, feature of northern California's real estate market. As such, marijuana is a key component of land values and the laundering of "illegal" wealth into legitimate circulation. By following land transaction practices, relations, and instruments, this article shows how formally equal property transactions become substantively unequal in light of the "il/legal" dynamics of marijuana land use. As marijuana becomes licit, prohibitionist policies have enabled the capture of ground rent by landed interests from the marijuana industry at a time when the price of marijuana is declining (in part due to its increasing licitness). The resulting "drug war rentier nexus," a state-land-finance complex, is becoming a key, if obscured, component within marijuana's contemporary political economy.

  3. Risk perception of aquatic pollution originated from chemical industry clusters in the coastal area of Jiangsu province, China.

    PubMed

    Yao, Hong; Liu, Bo; You, Zhen; Zhao, Li

    2018-02-01

    According to "the Layout Scheme of the Chemical Industry in Jiangsu Province From 2016 to 2030" and "the Development Planning in the Coastal Area of Jiangsu Province, China," several chemical industry clusters will be located in the coastal area of Jiangsu province, China, and the risk of surface water pollution will be inevitably higher in the densely populated region. To get to know the risk acceptance level of the residents near the clusters, public perception was analyzed from the five risk factors: the basic knowledge about the pollution, the negative effects on aquatic environment imposed by the clusters, the positive effects brought by the clusters, the trust of controlling aquatic pollution, and the acceptance of the clusters. Twenty-four statements were screened out to describe the five factors, and about 600 residents were covered in three typical clusters surveyed. On the whole, the youth showed a higher interest on the survey, and middle-aged people were likely to be more concerned about aquatic pollution incident. There was no significant difference on risk perception of the three clusters. The respondents investigated had good knowledge background on aquatic pollution and the residents identified with the benefits brought by the clusters. They were weak in risk awareness of pollution originated from the chemical enterprises' groups. Although the respondents regarded that chemical industry clusters did not expose all points of pollutants' generation to the public, they inclined to trust the administration agencies on controlling the pollution and welcome the construction of chemical clusters in their dwelling cities. Besides, risk perception showed obvious spatial distribution. The closer were the samples' sites to the clusters and the rivers receiving pollutants, the higher were the residents' perceived risk, benefit, and trust. However, there was no identical spatial difference on risk acceptance, which might be comprehensively influenced by various factors. Demographic variables on diverse risk acceptance levels were further illustrated, and some useful conclusions might be provided for managing the response of residents to aquatic pollution and helping identify effective precautionary measures in the vicinity of chemical industry clusters.

  4. Frequency and Acceptability of Adverse Events After Anterior Cervical Discectomy and Fusion: A Survey Study From the Cervical Spine Research Society.

    PubMed

    Wilson, Jefferson R; Radcliff, Kris; Schroeder, Gregory; Booth, Madison; Lucasti, Christopher; Fehlings, Michael; Ahmad, Nassr; Vaccaro, Alexander; Arnold, Paul; Sciubba, Daniel; Ching, Alex; Smith, Justin; Shaffrey, Christopher; Singh, Kern; Darden, Bruce; Daffner, Scott; Cheng, Ivan; Ghogawala, Zoher; Ludwig, Steven; Buchowski, Jacob; Brodke, Darrel; Wang, Jeffrey; Lehman, Ronald A; Hilibrand, Alan; Yoon, Tim; Grauer, Jonathan; Dailey, Andrew; Steinmetz, Michael; Harrop, James S

    2018-06-01

    Anterior cervical discectomy and fusion has a low but well-established profile of adverse events. The goal of this study was to gauge surgeon opinion regarding the frequency and acceptability of these events. A 2-page survey was distributed to attendees at the 2015 Cervical Spine Research Society (CSRS) meeting. Respondents were asked to categorize 18 anterior cervical discectomy and fusion-related adverse events as either: "common and acceptable," "uncommon and acceptable," "uncommon and sometimes acceptable," or "uncommon and unacceptable." Results were compiled to generate the relative frequency of these responses for each complication. Responses for each complication event were also compared between respondents based on practice location (US vs. non-US), primary specialty (orthopedics vs. neurosurgery) and years in practice. Of 150 surveys distributed, 115 responses were received (76.7% response rate), with the majority of respondents found to be US-based (71.3%) orthopedic surgeons (82.6%). Wrong level surgery, esophageal injury, retained drain, and spinal cord injury were considered by most to be unacceptable and uncommon complications. Dysphagia and adjacent segment disease occurred most often, but were deemed acceptable complications. Although surgeon experience and primary specialty had little impact on responses, practice location was found to significantly influence responses for 12 of 18 complications, with non-US surgeons found to categorize events more toward the uncommon and unacceptable end of the spectrum as compared with US surgeons. These results serve to aid communication and transparency within the field of spine surgery, and will help to inform future quality improvement and best practice initiatives.

  5. Breaking barriers to interoperability: assigning spatially and temporally unique identifiers to spaces and buildings.

    PubMed

    Pyke, Christopher R; Madan, Isaac

    2013-08-01

    The real estate industry routinely uses specialized information systems for functions, including design, construction, facilities management, brokerage, tax assessment, and utilities. These systems are mature and effective within vertically integrated market segments. However, new questions are reaching across these traditional information silos. For example, buyers may be interested in evaluating the design, energy efficiency characteristics, and operational performance of a commercial building. This requires the integration of information across multiple databases held by different institutions. Today, this type of data integration is difficult to automate and propone to errors due, in part, to the lack of generally accepted building and spaces identifiers. Moving forward, the real estate industry needs a new mechanism to assign identifiers for whole buildings and interior spaces for the purpose of interoperability, data exchange, and integration. This paper describes a systematic process to identify activities occurring at building or within interior spaces to provide a foundation for exchange and interoperability. We demonstrate the application of the approach with a prototype Web application. This concept and demonstration illustrate the elements of a practical interoperability framework that can increase productivity, create new business opportunities, and reduce errors, waste, and redundancy. © 2013 New York Academy of Sciences.

  6. Low Cost Carbon Fibre: Applications, Performance and Cost Models - Chapter 17

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Warren, Charles David; Wheatley, Dr. Alan; Das, Sujit

    2014-01-01

    Weight saving in automotive applications has a major bearing on fuel economy. It is generally accepted that, typically, a 10% weight reduction in an automobile will lead to a 6-8% improvement in fuel economy. In this respect, carbon fibre composites are extremely attractive in their ability to provide superlative mechanical performance per unit weight. That is why they are specified for high-end uses such as Formula 1 racing cars and the latest aircraft (e.g. Boeing 787, Airbus A350 and A380), where they comprise over 50% by weight of the structure However, carbon fibres are expensive and this renders their compositesmore » similarly expensive. Research has been carried out at Oak Ridge National Laboratories (ORNL), Tennessee, USA for over a decade with the aim of reducing the cost of carbon fibre such that it becomes a cost-effective option for the automotive industry. Aspects of this research relating to the development of low cost carbon fibre have been reported in Chapter 3 of this publication. In this chapter, the practical industrial applications of low-cost carbon fibre are presented, together with considerations of the performance and cost models which underpin the work.« less

  7. Reconnecting Stochastic Methods With Hydrogeological Applications: A Utilitarian Uncertainty Analysis and Risk Assessment Approach for the Design of Optimal Monitoring Networks

    NASA Astrophysics Data System (ADS)

    Bode, Felix; Ferré, Ty; Zigelli, Niklas; Emmert, Martin; Nowak, Wolfgang

    2018-03-01

    Collaboration between academics and practitioners promotes knowledge transfer between research and industry, with both sides benefiting greatly. However, academic approaches are often not feasible given real-world limits on time, cost and data availability, especially for risk and uncertainty analyses. Although the need for uncertainty quantification and risk assessment are clear, there are few published studies examining how scientific methods can be used in practice. In this work, we introduce possible strategies for transferring and communicating academic approaches to real-world applications, countering the current disconnect between increasingly sophisticated academic methods and methods that work and are accepted in practice. We analyze a collaboration between academics and water suppliers in Germany who wanted to design optimal groundwater monitoring networks for drinking-water well catchments. Our key conclusions are: to prefer multiobjective over single-objective optimization; to replace Monte-Carlo analyses by scenario methods; and to replace data-hungry quantitative risk assessment by easy-to-communicate qualitative methods. For improved communication, it is critical to set up common glossaries of terms to avoid misunderstandings, use striking visualization to communicate key concepts, and jointly and continually revisit the project objectives. Ultimately, these approaches and recommendations are simple and utilitarian enough to be transferred directly to other practical water resource related problems.

  8. Alcohol use as a strategy for obtaining nonconsensual sexual relations: incidence in Spanish university students and relation to rape myths acceptance.

    PubMed

    Romero-Sánchez, Mónica; Megías, Jesús L

    2010-11-01

    This study analyzed the strategy of college men who give alcohol to girls to facilitate their acceptance when pursuing sexual relationships. It also studied the role of attitudes towards sexual assaults (rape myths) in the social perception of this practice; finally, this research examined how the fact that, in some cases, college women accept taking alcohol in their interactions with college men was perceived. Participants were 349 heterosexual students (154 men and 195 women) from the University of Granada. 28% of males reported having given alcohol to females in order to have sexual contacts with them, while 44% of females acknowledged having suffered this practice. Men, compared to women, were more favourable to this practice; however, this effect was moderated by their rape myths endorsements. It was also found that males and, in general, those participants who endorsed rape myths, tended to consider that girls who accept alcohol in their interactions with boys are promiscuous.

  9. Exploring the Theory-Practice Gap in Initial Teacher Education: Moving beyond Questions of Relevance to Issues of Power and Authority

    ERIC Educational Resources Information Center

    McGarr, Oliver; O'Grady, Emmanuel; Guilfoyle, Liam

    2017-01-01

    The "theory-practice divide" in teacher education can be viewed not simply as an acceptance of a body of knowledge but instead an acceptance of the teacher educator's authority to determine what is relevant educational theory. This research aimed to explore student teachers' views of "educational theory" and how it was…

  10. 16 CFR Table 3 to Part 1512 - Minimum Acceptable Values for the Quantity A Defined in the Retroreflective Tire and Rim Test...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Minimum Acceptable Values for the Quantity A Defined in the Retroreflective Tire and Rim Test Procedure 3 Table 3 to Part 1512 Commercial Practices... Retroreflective Tire and Rim Test Procedure Observation angle (degrees) Entrance angle (degrees) Minimum...

  11. Sense of Peer Belonging and Institutional Acceptance in the First Year: The Role of High-Impact Practices

    ERIC Educational Resources Information Center

    Ribera, Amy K.; Miller, Angie L.; Dumford, Amber D.

    2017-01-01

    In this study we examined the role that high-impact practices play in shaping first-year students' sense of belonging as it relates to peers and institutional acceptance. We used data from the National Survey of Student Engagement (N = 9,371), and results revealed troublesome gaps for historically underrepresented populations in their sense of…

  12. Evaluation of Practicing sustainable Industrial Solid Waste Minimization by Manufacturing Firms in Malaysia: Strengths and Weaknesses.

    PubMed

    Mallak, Shadi Kafi; Bakri Ishak, Mohd; Mohamed, Ahmad Fariz

    2016-09-13

    Malaysia is facing an increasing trend in industrial solid waste generation due to industrial development.Thus there is a paramount need in taking a serious action to move toward sustainable industrial waste management. The main aim of this study is to assess practicing solid waste minimization by manufacturing firms in Shah Alam industrial state, Malaysia. This paper presents a series of descriptive and inferential statistical analysis regarding the level and effects of practicing waste minimization methods, and seriousness of barriers preventing industries from practicing waste minimization methods. For this purpose the survey questions were designed such that both quantitative (questionnaire) and qualitative (semi-structures interview) data were collected concurrently. Analysis showed that, the majority of firms (92%) dispose their wastes rather than practice other sustainable waste management options. Also waste minimization methods such as segregation of wastes, on-site recycle and reuse, improve housekeeping and equipment modification were found to have significant contribution in waste reduction (p<0.05). Lack of expertise (M=3.50), lack of enough information (M= 3.54), lack of equipment modification (M= 3.16) and lack of specific waste minimization guidelines (M=3.49) have higher mean scores comparing with other barriers in different categories. These data were interpreted for elaborating of SWOT and TOWS matrix to highlight strengths, weaknesses, threats and opportunities. Accordingly, ten policies were recommended for improvement of practicing waste minimization by manufacturing firms as the main aim of this research. Implications This manuscript critically analysis waste minimization practices by manufacturing firms in Malaysia. Both qualitative and quantitative data collection and analysis were conducted to formulate SWOT and TOWS matrix in order to recommend policies and strategies for improvement of solid waste minimization by manufacturing industries. The results contribute to the knowledge and the findings of this study provide a useful baseline information and data on industrial solid waste generation and waste minimization practice.

  13. Perceived Use and Acceptance of Cloud Enterprise Resource Planning (ERP) Implementation in the Manufacturing Industries

    ERIC Educational Resources Information Center

    Adeboje, Adewale

    2015-01-01

    The purpose of this study was to gain an insight into perceived use and acceptance for implementing an enterprise resource planning system and the decision whether to contract out the enterprise resource planning (ERP) service to a cloud provider. Cloud-based ERP systems can provide many advantages to the normal implementation of the same systems…

  14. How Do Idaho Post-Secondary T&I Instructors Feel about Time-Shortened Tech-Prep Articulation?

    ERIC Educational Resources Information Center

    Rogers, George E.; Wilson, Ruth D.

    A study examined the acceptance of the time-shortened articulation (TSA) approach adopted to implement tech prep programs by Idaho postsecondary trade and industrial instructors. From a sample of 143 instructors, 46 usable responses were received. Hall's (1979) Stages of Concern (SoC) model was used to determine if they had accepted the process,…

  15. A Study of Using Technology Acceptance Model and Its Effect on Improving Road Pavement Smoothness in Taiwan

    ERIC Educational Resources Information Center

    Huang, Long-Sheng; Huang, Chung-Fah

    2017-01-01

    Using the technology acceptance model (TAM) as its theoretical foundation, this study intends to explore the use of Travelling Beam devices in road engineerings in Taiwan and offer suggestions based on its findings to encourage industry willingness for device deployment resulting in improving road pavement smoothness in Taiwan. The study subjects…

  16. 19 CFR 24.13a - Car, compartment, and package seals; and fastenings; standards; acceptance by Customs.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Car, compartment, and package seals; and... PROCEDURE § 24.13a Car, compartment, and package seals; and fastenings; standards; acceptance by Customs. (a... identification number on the seal. (2) If the seal is to be used by private industry (i.e., a shipper...

  17. 19 CFR 24.13a - Car, compartment, and package seals; and fastenings; standards; acceptance by Customs.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Car, compartment, and package seals; and... PROCEDURE § 24.13a Car, compartment, and package seals; and fastenings; standards; acceptance by Customs. (a... identification number on the seal. (2) If the seal is to be used by private industry (i.e., a shipper...

  18. 19 CFR 24.13a - Car, compartment, and package seals; and fastenings; standards; acceptance by Customs.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Car, compartment, and package seals; and... PROCEDURE § 24.13a Car, compartment, and package seals; and fastenings; standards; acceptance by Customs. (a... identification number on the seal. (2) If the seal is to be used by private industry (i.e., a shipper...

  19. Companies' opinions and acceptance of global food safety initiative benchmarks after implementation.

    PubMed

    Crandall, Phil; Van Loo, Ellen J; O'Bryan, Corliss A; Mauromoustakos, Andy; Yiannas, Frank; Dyenson, Natalie; Berdnik, Irina

    2012-09-01

    International attention has been focused on minimizing costs that may unnecessarily raise food prices. One important aspect to consider is the redundant and overlapping costs of food safety audits. The Global Food Safety Initiative (GFSI) has devised benchmarked schemes based on existing international food safety standards for use as a unifying standard accepted by many retailers. The present study was conducted to evaluate the impact of the decision made by Walmart Stores (Bentonville, AR) to require their suppliers to become GFSI compliant. An online survey of 174 retail suppliers was conducted to assess food suppliers' opinions of this requirement and the benefits suppliers realized when they transitioned from their previous food safety systems. The most common reason for becoming GFSI compliant was to meet customers' requirements; thus, supplier implementation of the GFSI standards was not entirely voluntary. Other reasons given for compliance were enhancing food safety and remaining competitive. About 54 % of food processing plants using GFSI benchmarked schemes followed the guidelines of Safe Quality Food 2000 and 37 % followed those of the British Retail Consortium. At the supplier level, 58 % followed Safe Quality Food 2000 and 31 % followed the British Retail Consortium. Respondents reported that the certification process took about 10 months. The most common reason for selecting a certain GFSI benchmarked scheme was because it was widely accepted by customers (retailers). Four other common reasons were (i) the standard has a good reputation in the industry, (ii) the standard was recommended by others, (iii) the standard is most often used in the industry, and (iv) the standard was required by one of their customers. Most suppliers agreed that increased safety of their products was required to comply with GFSI benchmarked schemes. They also agreed that the GFSI required a more carefully documented food safety management system, which often required improved company food safety practices and increased employee training. Adoption of a GFSI benchmarked scheme resulted in fewer audits, i.e., one less per year. An educational opportunity exists to acquaint retailers and suppliers worldwide with the benefits of having an internationally recognized certification program such as that recognized by the GFSI.

  20. Sound as artifact

    NASA Astrophysics Data System (ADS)

    Benjamin, Jeffrey L.

    A distinguishing feature of the discipline of archaeology is its reliance upon sensory dependant investigation. As perceived by all of the senses, the felt environment is a unique area of archaeological knowledge. It is generally accepted that the emergence of industrial processes in the recent past has been accompanied by unprecedented sonic extremes. The work of environmental historians has provided ample evidence that the introduction of much of this unwanted sound, or "noise" was an area of contestation. More recent research in the history of sound has called for more nuanced distinctions than the noisy/quiet dichotomy. Acoustic archaeology tends to focus upon a reconstruction of sound producing instruments and spaces with a primary goal of ascertaining intentionality. Most archaeoacoustic research is focused on learning more about the sonic world of people within prehistoric timeframes while some research has been done on historic sites. In this thesis, by way of a meditation on industrial sound and the physical remains of the Quincy Mining Company blacksmith shop (Hancock, MI) in particular, I argue for an acceptance and inclusion of sound as artifact in and of itself. I am introducing the concept of an individual sound-form, or sonifact , as a reproducible, repeatable, representable physical entity, created by tangible, perhaps even visible, host-artifacts. A sonifact is a sound that endures through time, with negligible variability. Through the piecing together of historical and archaeological evidence, in this thesis I present a plausible sonifactual assemblage at the blacksmith shop in April 1916 as it may have been experienced by an individual traversing the vicinity on foot: an 'historic soundwalk.' The sensory apprehension of abandoned industrial sites is multi-faceted. In this thesis I hope to make the case for an acceptance of sound as a primary heritage value when thinking about the industrial past, and also for an increased awareness and acceptance of sound and listening as a primary mode of perception.

  1. The “We Card” Program: Tobacco Industry “Youth Smoking Prevention” as Industry Self-Preservation

    PubMed Central

    Malone, Ruth E.

    2010-01-01

    The “We Card” program is the most ubiquitous tobacco industry “youth smoking prevention” program in the United States, and its retailer materials have been copied in other countries. The program's effectiveness has been questioned, but no previous studies have examined its development, goals, and uses from the tobacco industry's perspective. On the basis of our analysis of tobacco industry documents released under the 1998 Master Settlement Agreement, we concluded that the We Card program was undertaken for 2 primary purposes: to improve the tobacco industry's image and to reduce regulation and the enforcement of existing laws. Policymakers should be cautious about accepting industry self-regulation at face value, both because it redounds to the industry's benefit and because it is ineffective. PMID:20466965

  2. A survey of environmental and occupational work practices in the automotive refinishing industry of a developing country: Sonora, Mexico.

    PubMed

    Velázquez, Luis; Bello, Dhimiter; Munguia, Nora; Zavala, Andrea; Marin, Amina; Moure-Eraso, Rafael

    2008-01-01

    The automotive repair and refinishing industry has been studied intensively in industrialized countries, in part due to use of hazardous chemicals such as isocyanates and solvents, but little is known about industry practices in the developing world. The main objective of this paper was to investigate environmental and occupational work practices of this industry in a developing region, Sonora, Mexico. An integrated survey approach maximizes the opportunity for identifying risks as well as reducing risks. This investigation included detailed workplace visits to 41 body shops and 6 paint suppliers, as well as a survey of shop owners and 24 workers. Information was collected on work practices, level of technology in the shops, use of personal protective equipment, consumption and handling of hazardous chemicals and waste, hazard communication, and environmental consciousness. Most shops had little capital, outdated technology for exposure control, poor working conditions, high potential for exposure to hazardous chemicals, and little awareness of environmental and occupational health and safety. We concluded that work practices in the Sonoran auto refinishing industry are unsustainable and may pose a health risk to workers and the environment.

  3. Will Future Measurement Needs of the Semiconductor Industry Be Met?

    PubMed

    Bennett, Herbert S

    2007-01-01

    We discuss the ability of the nation's measurement system to meet future metrology needs of the semiconductor industry. Lacking an acceptable metric for assessing the health of metrology for the semiconductor industry, we identify a limited set of unmet measurement needs. Assuming that this set of needs may serve as proxy for the galaxy of semiconductor measurement needs, we examine it from the perspective of what will be required to continue the semiconductor industry's powerful impact in the world's macro-economy and maintain its exceptional record of numerous technological innovations. This paper concludes with suggestions about ways to strengthen the measurement system for the semiconductor industry.

  4. Industrial Energy Efficiency Practices in Indonesia: Lesson Learned from Astra Green Energy (AGen) Award

    NASA Astrophysics Data System (ADS)

    Telaga, A. S.; Hartanto, I. D.

    2017-03-01

    Many countries have used award system to promote energy efficiency practices in industry. The award system has been found to have significant impact to increase energy conservation and sustainability adoption in companies. Astra International (AI) as a holding company of more than 200 companies also organised Astra green energy (AGen) award to all affiliated companies (AFFCO) in Astra group. The event has been used to share energy efficiency best practices among AFFCO in Astra group. AFFCOs of Astra International are among the biggest and the leader in their industrial sectors Therefore, analyses from AFFO’s energy efficiency case studies represents current practices in Indonesia industrial sectors. Analyses are divided into industry, building, and renewable energy. The results from analyses found that AFFCOs already aware of energy conservation and have implemented projects to promote energy efficiency. However, the AFFCOs do not optimally use monitoring data for energy reduction.

  5. Worlds apart. Consumer acceptance of functional foods and beverages in Germany and China.

    PubMed

    Siegrist, Michael; Shi, Jing; Giusto, Alice; Hartmann, Christina

    2015-09-01

    This study examined consumers' willingness to buy functional foods. Data were collected from an Internet survey in Germany (n = 502) and China (n = 443). The results showed that consumers in China were much more willing to buy functional foods, compared with their German counterparts. A substantial segment of the German consumers indicated lower willingness to buy functional foods, compared with the same foods without additional health benefits. The findings further showed that in both countries, the participants with higher health motivation and more trust in the food industry reported higher willingness to buy functional foods than the participants with lower health motivation and less trust in the industry. Food neophobia had a negative impact on acceptance of functional foods in the Chinese sample. No such association was observed for the German sample. The results suggest that cultural factors play a significant role in the acceptance of functional foods; therefore, caution should be exercised in generalizing research findings from Western countries to others. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Predicting Acceptance of Diversity in Pre-Kindergarten Classrooms

    ERIC Educational Resources Information Center

    Sanders, Kay; Downer, Jason

    2012-01-01

    This study examined classroom-level contributors to an acceptance of diversity in publicly supported pre-kindergarten classrooms across 11 states. Classroom composition, process quality, and teacher characteristics were examined as predictors of diversity-promoting practices as measured by the ECERS-R, acceptance of diversity construct. Findings…

  7. 19 CFR 210.58 - Provisional acceptance of the motion.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Provisional acceptance of the motion. 210.58 Section 210.58 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE ADJUDICATION AND ENFORCEMENT Temporary Relief § 210.58 Provisional acceptance of...

  8. Industry best practices for the software development life cycle

    DOT National Transportation Integrated Search

    2007-11-01

    In the area of software development, there are many different views of what constitutes a best practice. The goal of this project was to identify a set of industry best practice techniques that fit the needs of the Montana Department of Transportatio...

  9. Manpower Requirements Report for FY 1982

    DTIC Science & Technology

    1981-02-01

    Specifically included are program elements for industrial preparedness, second destination transportation, property disposal, production engineering ...artillery, and combat - engineers . Army policy accepts the fact that women will serve in loca- .. tions throughout the battlefield, will be expected to... industrial engineering work measurement techniques and computerized models such as the Logistics Composite Model (LCOM). MEP policy emanates from the

  10. Decision-Making Amplification under Uncertainty: An Exploratory Study of Behavioral Similarity and Intelligent Decision Support Systems

    ERIC Educational Resources Information Center

    Campbell, Merle Wayne

    2013-01-01

    Intelligent decision systems have the potential to support and greatly amplify human decision-making across a number of industries and domains. However, despite the rapid improvement in the underlying capabilities of these "intelligent" systems, increasing their acceptance as decision aids in industry has remained a formidable challenge.…

  11. Bricklayer: Apprenticeship Course Outline. Apprenticeship and Industry Training. 0110

    ERIC Educational Resources Information Center

    Alberta Advanced Education and Technology, 2010

    2010-01-01

    The graduate of the Bricklayer apprenticeship training is a journeyperson who will be able to: (1) responsibly do all work tasks expected of a journeyperson; (2) supervise, train and coach apprentices; (3) produce a better quality product than the minimum acceptable by industry standard; (4) use and maintain tools and equipment to the standards of…

  12. Bricklayer: Apprenticeship Course Outline. Apprenticeship and Industry Training. 0110.1

    ERIC Educational Resources Information Center

    Alberta Advanced Education and Technology, 2010

    2010-01-01

    The graduate of the Bricklayer apprenticeship training is a journeyperson who will be able to: (1) responsibly do all work tasks expected of a journeyperson; (2) supervise, train and coach apprentices; (3) produce a better quality product than the minimum acceptable by industry standard; (4) use and maintain tools and equipment to the standards of…

  13. Dark chocolate acceptability: influence of cocoa origin and processing conditions.

    PubMed

    Torres-Moreno, Miriam; Tarrega, Amparo; Costell, Elvira; Blanch, Consol

    2012-01-30

    Chocolate properties can vary depending on cocoa origin, composition and manufacturing procedure, which affect consumer acceptability. The aim of this work was to study the effect of two cocoa origins (Ghana and Ecuador) and two processing conditions (roasting time and conching time) on dark chocolate acceptability. Overall acceptability and acceptability for different attributes (colour, flavour, odour and texture) were evaluated by 95 consumers. Differences in acceptability among dark chocolates were mainly related to differences in flavour acceptability. The use of a long roasting time lowered chocolate acceptability in Ghanaian samples while it had no effect on acceptability of Ecuadorian chocolates. This response was observed for most consumers (two subgroups with different frequency consumption of dark chocolate). However, for a third group of consumers identified as distinguishers, the most acceptable dark chocolate samples were those produced with specific combinations of roasting time and conching time for each of the cocoa geographical origin considered. To produce dark chocolates from a single origin it is important to know the target market preferences and to select the appropriate roasting and conching conditions. Copyright © 2011 Society of Chemical Industry.

  14. Designing a two-rank acceptance sampling plan for quality inspection of geospatial data products

    NASA Astrophysics Data System (ADS)

    Tong, Xiaohua; Wang, Zhenhua; Xie, Huan; Liang, Dan; Jiang, Zuoqin; Li, Jinchao; Li, Jun

    2011-10-01

    To address the disadvantages of classical sampling plans designed for traditional industrial products, we originally propose a two-rank acceptance sampling plan (TRASP) for the inspection of geospatial data outputs based on the acceptance quality level (AQL). The first rank sampling plan is to inspect the lot consisting of map sheets, and the second is to inspect the lot consisting of features in an individual map sheet. The TRASP design is formulated as an optimization problem with respect to sample size and acceptance number, which covers two lot size cases. The first case is for a small lot size with nonconformities being modeled by a hypergeometric distribution function, and the second is for a larger lot size with nonconformities being modeled by a Poisson distribution function. The proposed TRASP is illustrated through two empirical case studies. Our analysis demonstrates that: (1) the proposed TRASP provides a general approach for quality inspection of geospatial data outputs consisting of non-uniform items and (2) the proposed acceptance sampling plan based on TRASP performs better than other classical sampling plans. It overcomes the drawbacks of percent sampling, i.e., "strictness for large lot size, toleration for small lot size," and those of a national standard used specifically for industrial outputs, i.e., "lots with different sizes corresponding to the same sampling plan."

  15. Changing corporate practices to reduce cancer disparities.

    PubMed

    Freudenberg, Nicholas; Galea, Sandro; Fahs, Marianne

    2008-02-01

    While reducing racial/ethnic and socioeconomic disparities in cancer mortality has been identified as a national goal, current policies are unlikely to achieve it. In order to advance the development of policies for the primary prevention of cancer and cancer disparities, we propose that the practices of the tobacco, alcohol, and food industries be considered as modifiable social determinants of health. We review evidence that the practices of these industries in product design, marketing, retail distribution, and pricing contribute to cancer risk behavior, incidence, and disparities, then examine public health strategies designed to reduce health-damaging practices of these industries and encourage healthier alternatives. We conclude with recommendations for research, practice, and policy that could contribute to the development of less carcinogenic corporate practices.

  16. Lobbying Reform: Background and Legislative Proposals, 109th Congress

    DTIC Science & Technology

    2006-03-23

    activities have also been linked to campaign finance practices, congressional procedures regarding the acceptance of gifts from lobbyists, and the inclusion...Introduced in the 109th Congress: A Comparative Analysis, by R. Eric Petersen; and CRS Report RL33237, Congressional Gifts and Travel, Legislative...linked to other activities carried out by lobbyists. These include campaign finance practices,3 congressional rules regarding the acceptance of gifts

  17. The Rigour of IFRS Education in the USA: Analysis, Reflection and Innovativeness

    ERIC Educational Resources Information Center

    Tan, Aldys; Chatterjee, Bikram; Bolt, Susan

    2014-01-01

    International Financial Reporting Standards (IFRS) are accepted throughout the world, particularly in the European Union, Australia, New Zealand and Canada. Emerging economies are also are aligning their practices with IFRS. Historically, the USA has been cautious about accepting IFRS. However, following acceptance of IFRS worldwide, the US…

  18. Research in Review. Children's Eating: The Development of Food-Acceptance Patterns.

    ERIC Educational Resources Information Center

    Birch, Leann L.; And Others

    1995-01-01

    Reviews what is known about the factors that influence child's food-acceptance patterns, including children's sensory responsiveness, innate preferences, and ability to learn about food; the consequences of eating; and the effect of child-feeding practices on children's food-acceptance patterns. Suggests that early experience contributes to the…

  19. Tanzania wilderness areas

    Treesearch

    M. G. G. Mtahiko

    2007-01-01

    Conservation in many of the African countries differs in terms of approaches but it is generally accepted that no matter what system is adopted all aim at protecting the resources in an optimum condition, as would be practicably possible through application of the most contemporary acceptable methodologies. All aim to balance development that assures acceptable levels...

  20. Undue industry influences that distort healthcare research, strategy, expenditure and practice: a review.

    PubMed

    Stamatakis, Emmanuel; Weiler, Richard; Ioannidis, John P A

    2013-05-01

    Expenditure on industry products (mostly drugs and devices) has spiraled over the last 15 years and accounts for substantial part of healthcare expenditure. The enormous financial interests involved in the development and marketing of drugs and devices may have given excessive power to these industries to influence medical research, policy, and practice. Review of the literature and analysis of the multiple pathways through which the industry has directly or indirectly infiltrated the broader healthcare systems. We present the analysis of the industry influences at the following levels: (i) evidence base production, (ii) evidence synthesis, (iii) understanding of safety and harms issues, (iv) cost-effectiveness evaluation, (v) clinical practice guidelines formation, (vi) healthcare professional education, (vii) healthcare practice, (viii) healthcare consumer's decisions. We located abundance of consistent evidence demonstrating that the industry has created means to intervene in all steps of the processes that determine healthcare research, strategy, expenditure, practice and education. As a result of these interferences, the benefits of drugs and other products are often exaggerated and their potential harms are downplayed, and clinical guidelines, medical practice, and healthcare expenditure decisions are biased. To serve its interests, the industry masterfully influences evidence base production, evidence synthesis, understanding of harms issues, cost-effectiveness evaluations, clinical practice guidelines and healthcare professional education and also exerts direct influences on professional decisions and health consumers. There is an urgent need for regulation and other action towards redefining the mission of medicine towards a more objective and patient-, population- and society-benefit direction that is free from conflict of interests. © 2013 Stichting European Society for Clinical Investigation Journal Foundation. Published by Blackwell Publishing Ltd.

  1. Feasibility, acceptability and effectiveness of an online alternative to face-to-face consultation in general practice: a mixed-methods study of webGP in six Devon practices.

    PubMed

    Carter, Mary; Fletcher, Emily; Sansom, Anna; Warren, Fiona C; Campbell, John L

    2018-02-15

    To evaluate the feasibility, acceptability and effectiveness of webGP as piloted by six general practices. Mixed-methods evaluation, including data extraction from practice databases, general practitioner (GP) completion of case reports, patient questionnaires and staff interviews. General practices in NHS Northern, Eastern and Western Devon Clinical Commissioning Group's area approximately 6 months after implementing webGP (February-July 2016). Six practices provided consultations data; 20 GPs completed case reports (regarding 61 e-consults); 81 patients completed questionnaires; 5 GPs and 5 administrators were interviewed. Attitudes and experiences of practice staff and patients regarding webGP. WebGP uptake during the evaluation was small, showing no discernible impact on practice workload. The completeness of cross-sectional data on consultation workload varied between practices.GPs judged 41/61 (72%) of webGP requests to require a face-to-face or telephone consultation. Introducing webGP appeared to be associated with shifts in responsibility and workload between practice staff and between practices and patients.81/231 patients completed a postal survey (35.1% response rate). E-Consulters were somewhat younger and more likely to be employed than face-to-face respondents. WebGP appeared broadly acceptable to patients regarding timeliness and quality/experience of care provided. Similar problems were presented by all respondents. Both groups appeared equally familiar with other practice online services; e-consulters were somewhat more likely to have used them.From semistructured staff interviews, it appeared that, while largely acceptable within practice, introducing e-consults had potential for adverse interactions with pre-existing practice systems. There is potential to assess the impact of new systems on consultation patterns by extracting routine data from practice databases. Staff and patients noticed subtle changes to responsibilities associated with online options. Greater uptake requires good communication between practice and patients, and organisation of systems to avoid conflicts and misuse. Further research is required to evaluate the full potential of webGP in managing practice workload. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  2. Full journal publication of abstracts presented at the Nordic Congress of General Practice in 2009 and 2011.

    PubMed

    Waldorff, Frans Boch; Petersen, Kristine; Vinther, Siri; Sandholdt, Håkon; Siersma, Volkert; Andersen, John Sahl

    2017-03-01

    To determine the overall publication rates for abstracts presented at two consecutive Nordic Congresses of General Practice and to evaluate determinants for these publication rates. Prospective study. MEDLINE (PubMed) and Google Scholar were searched for relevant publications from 1 January 2009 up until 31 August 2014. Abstracts accepted for oral or poster presentation were identified from the original congress booklets from the Nordic Congresses of General Practice in 2009 and 2011. Based on PubMed and Google Scholar searches, we subsequently identified full journal publications within a 36-month follow-up from both congresses. In cases of doubt, the first author was contacted directly. Full journal publication within 36 months after the congress. A total of 200 abstracts were analyzed. Of these, 85 (42.5%) were identified with a full publication within 36 months after the congress. More abstracts from the 2011 congress were published compared to the 2009 congress odds ratio (OR) 1.97, 95% confidence interval (CI) (1.10; 3.50). Abstracts accepted for oral presentation were more often published OR 1.94, 95% CI (1.08; 3.50) than accepted poster abstracts. In the multivariate analysis, a university affiliation for both first and last author increased the probability for publication OR 4.23, 95% CI (1.71; 10.42), as well as more than two authors. An optimal number, based on the highest OR, seems to be 3-4 authors with OR 2.43, 95% CI (1.07; 5.54). Qualitative studies were published at the same frequency as quantitative studies OR 1.36, 95% CI (0.57; 3.24). Less than half of the abstracts accepted for oral or poster presentation at two consecutive Nordic Congresses of General Practice were published as full text articles within 36 months. Key points Congress abstracts accepted for Nordic Congress of General Practice are not indexed in international search databases. Less than half of the abstracts accepted for oral or poster presentation at two consecutive Nordic Congresses of General Practice were published as full text articles within 36 months. Future congress committees could address this aspect in order to increase the visibility of and accessibility to research within the field of general practice.

  3. Full journal publication of abstracts presented at the Nordic Congress of General Practice in 2009 and 2011

    PubMed Central

    Waldorff, Frans Boch; Petersen, Kristine; Vinther, Siri; Sandholdt, Håkon; Siersma, Volkert; Andersen, John Sahl

    2017-01-01

    Objective To determine the overall publication rates for abstracts presented at two consecutive Nordic Congresses of General Practice and to evaluate determinants for these publication rates. Design Prospective study. Setting MEDLINE (PubMed) and Google Scholar were searched for relevant publications from 1 January 2009 up until 31 August 2014. Methods Abstracts accepted for oral or poster presentation were identified from the original congress booklets from the Nordic Congresses of General Practice in 2009 and 2011. Based on PubMed and Google Scholar searches, we subsequently identified full journal publications within a 36-month follow-up from both congresses. In cases of doubt, the first author was contacted directly. Main outcome measures Full journal publication within 36 months after the congress. Results A total of 200 abstracts were analyzed. Of these, 85 (42.5%) were identified with a full publication within 36 months after the congress. More abstracts from the 2011 congress were published compared to the 2009 congress odds ratio (OR) 1.97, 95% confidence interval (CI) (1.10; 3.50). Abstracts accepted for oral presentation were more often published OR 1.94, 95% CI (1.08; 3.50) than accepted poster abstracts. In the multivariate analysis, a university affiliation for both first and last author increased the probability for publication OR 4.23, 95% CI (1.71; 10.42), as well as more than two authors. An optimal number, based on the highest OR, seems to be 3–4 authors with OR 2.43, 95% CI (1.07; 5.54). Qualitative studies were published at the same frequency as quantitative studies OR 1.36, 95% CI (0.57; 3.24). Conclusion Less than half of the abstracts accepted for oral or poster presentation at two consecutive Nordic Congresses of General Practice were published as full text articles within 36 months. Key points Congress abstracts accepted for Nordic Congress of General Practice are not indexed in international search databases. Less than half of the abstracts accepted for oral or poster presentation at two consecutive Nordic Congresses of General Practice were published as full text articles within 36 months. Future congress committees could address this aspect in order to increase the visibility of and accessibility to research within the field of general practice. PMID:28277049

  4. Interactions between physicians and the pharmaceutical industry: what does the literature say?

    PubMed Central

    Lexchin, J

    1993-01-01

    OBJECTIVE: To determine the effect of three types of interaction between physicians and the pharmaceutical industry--company-funded clinical trials, company-sponsored continuing medical education (CME) and information for physicians supplied by pharmaceutical detailers--on orientation and quality of clinical trials, content of CME courses and physicians' prescribing behaviour. DATA SOURCES: MEDLINE and HEALTH searches for English-language articles published from 1978 to 1993, supplemented by material from the author's personal collection. STUDY SELECTION: A total of 227 papers from the MEDLINE and HEALTH searches and about 2000 items from the author's library were initially reviewed. The following selection criteria were used: studies conducted in Australia, Canada, New Zealand, Britain and the United States; studies conducted after 1977; quantitative surveys containing details of the survey methods; studies on the orientation and quality of company-funded clinical trials and on the content of CME courses giving explicit criteria used in the evaluation; and reports on the outcome of interactions stating how the outcomes were assessed. Thirty-six studies met these criteria. DATA EXTRACTION: Information was extracted on five topics: physicians' attitudes toward drug industry interactions, frequency with which physicians participate in the interactions, orientation and quality of company-funded clinical trials, content of company-sponsored CME courses and changes in physicians' prescribing behaviour as a result of an interaction. DATA SYNTHESIS: Although most physicians participate only occasionally in company-sponsored clinical trials, most see detailers and attend company-sponsored CME courses. However, physicians do not have a very high opinion of the information from detailers or of company-sponsored CME events. Many doctors regard pharmaceutical companies as an important source of funding for clinical trials, but they also have concerns about accepting money from this source. Company funding of clinical trials may affect the quality of the trials and the types of research that physicians undertake. Company-sponsored CME courses may have a commercial bias even if conducted under guidelines designed to ensure the independence of the event. All three types of interactions affect physicians' prescribing behaviour and, in the case of obtaining information from detailers, physicians' prescribing practices are less appropriate as a result of the interaction. CONCLUSIONS: Physicians are affected by their interactions with the pharmaceutical industry. Further research needs to be done in most cases to determine whether such interactions lead to more or less appropriate prescribing practices. The CMA's guidelines on this topic should be evaluated to see whether they are effective in controlling physician-industry interactions. Further measures may be necessary if the guidelines fail to prevent negative effects on prescribing practices. PMID:8221424

  5. Turning on the care coordination switch in rural primary care: voices from the practices--clinician champions, clinician partners, administrators, and nurse care managers.

    PubMed

    Fagnan, Lyle J; Dorr, David A; Davis, Melinda; McGinnis, Paul; Mahler, Jo; King, Molly McCarthy; Michaels, LeAnn

    2011-01-01

    This study sought to understand the acceptability and feasibility of office-based nurse care management in medium to large rural primary care practices. A qualitative assessment of Care Management Plus (a focused medical home model for complex patients) implementation was conducted using semistructured interviews with 4 staff cohorts. Cohorts included clinician champions, clinician partners, practice administrators, and nurse care managers. Seven key implementation attributes were: a proven care coordination program; adequate staffing; practice buy-in; adequate time; measurement; practice facilitation; and functional information technology. Although staff was positive about the care coordination concept, model acceptability was varied and additional study is required to determine sustainability.

  6. Economic considerations of breeding for polled dairy cows versus dehorning in the United States.

    PubMed

    Thompson, Nathanael M; Widmar, Nicole Olynk; Schutz, Michael M; Cole, John B; Wolf, Christopher A

    2017-06-01

    This paper examines the costs and benefits of selecting for polled dairy heifers versus traditional dehorning practices. Stochastic budgets were developed to analyze the expected costs (EC) associated with polled dairy genetics. The economic assessment was expanded beyond on-farm cash costs by incorporating cost and benefit estimates to generate industry-wide discussion, and preliminary economic evaluations, surrounding the public acceptance and attitude toward polled genetics versus dehorning calves. Triangular distributions, commonly used to represent distributions with limited data, were used to represent labor costs for dehorning, the likelihood of treatment of calf, and the cost of veterinary treatment. In total, 10,000 iterations were run using @Risk v 6.0 (Palisade Corp., Newfield, NY). The EC of the 4 traditional dehorning methods evaluated in this study ranged from $6 to $25/head, with a mean EC around $12 to $13/head. The EC of incorporating polled genetics into a breeding program ranged from $0 to $26/head depending on the additional cost, or premium, associated with polled relative to horned genetics. Estimated breakeven premiums associated with polled genetics indicate that, on average, producers could spend up to $5.95/head and $11.90/head more for heterozygous and homozygous polled genetics, respectively, compared with conventional horned genetics (or $2.08 and $4.17/straw of semen at an assumed average conception rate of 35%). Given the parameters outlined, sensitivity to individual farm semen and dehorning costs are likely to swamp these differences. Beyond on-farm costs, industry-wide discussion may be warranted surrounding the public's acceptance and attitude toward polled genetics versus dehorning or disbudding of calves. The value of avoiding dehorning may be larger for the industry, and perhaps some individual farms, than initially suggested if additional value is put on calf comfort and possible worker aversion to dehorning. If public perception of dehorning influences market access, the EC of dehorning may be large but that cost is unknown at present. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  7. Measurement System Analyses - Gauge Repeatability and Reproducibility Methods

    NASA Astrophysics Data System (ADS)

    Cepova, Lenka; Kovacikova, Andrea; Cep, Robert; Klaput, Pavel; Mizera, Ondrej

    2018-02-01

    The submitted article focuses on a detailed explanation of the average and range method (Automotive Industry Action Group, Measurement System Analysis approach) and of the honest Gauge Repeatability and Reproducibility method (Evaluating the Measurement Process approach). The measured data (thickness of plastic parts) were evaluated by both methods and their results were compared on the basis of numerical evaluation. Both methods were additionally compared and their advantages and disadvantages were discussed. One difference between both methods is the calculation of variation components. The AIAG method calculates the variation components based on standard deviation (then a sum of variation components does not give 100 %) and the honest GRR study calculates the variation components based on variance, where the sum of all variation components (part to part variation, EV & AV) gives the total variation of 100 %. Acceptance of both methods among the professional society, future use, and acceptance by manufacturing industry were also discussed. Nowadays, the AIAG is the leading method in the industry.

  8. An approach to optimize the batch mixing process for improving the quality consistency of the products made from traditional Chinese medicines*

    PubMed Central

    Yan, Bin-jun; Qu, Hai-bin

    2013-01-01

    The efficacy of traditional Chinese medicine (TCM) is based on the combined effects of its constituents. Variation in chemical composition between batches of TCM has always been the deterring factor in achieving consistency in efficacy. The batch mixing process can significantly reduce the batch-to-batch quality variation in TCM extracts by mixing them in a well-designed proportion. However, reducing the quality variation without sacrificing too much of the production efficiency is one of the challenges. Accordingly, an innovative and practical batch mixing method aimed at providing acceptable efficiency for industrial production of TCM products is proposed in this work, which uses a minimum number of batches of extracts to meet the content limits. The important factors affecting the utilization ratio of the extracts (URE) were studied by simulations. The results have shown that URE was affected by the correlation between the contents of constituents, and URE decreased with the increase in the number of targets and the relative standard deviations of the contents. URE could be increased by increasing the number of storage tanks. The results have provided a reference for designing the batch mixing process. The proposed method has possible application value in reducing the quality variation in TCM and providing acceptable production efficiency simultaneously. PMID:24190450

  9. An approach to optimize the batch mixing process for improving the quality consistency of the products made from traditional Chinese medicines.

    PubMed

    Yan, Bin-jun; Qu, Hai-bin

    2013-11-01

    The efficacy of traditional Chinese medicine (TCM) is based on the combined effects of its constituents. Variation in chemical composition between batches of TCM has always been the deterring factor in achieving consistency in efficacy. The batch mixing process can significantly reduce the batch-to-batch quality variation in TCM extracts by mixing them in a well-designed proportion. However, reducing the quality variation without sacrificing too much of the production efficiency is one of the challenges. Accordingly, an innovative and practical batch mixing method aimed at providing acceptable efficiency for industrial production of TCM products is proposed in this work, which uses a minimum number of batches of extracts to meet the content limits. The important factors affecting the utilization ratio of the extracts (URE) were studied by simulations. The results have shown that URE was affected by the correlation between the contents of constituents, and URE decreased with the increase in the number of targets and the relative standard deviations of the contents. URE could be increased by increasing the number of storage tanks. The results have provided a reference for designing the batch mixing process. The proposed method has possible application value in reducing the quality variation in TCM and providing acceptable production efficiency simultaneously.

  10. Public Health Campaigns to Change Industry Practices that Damage Health: An Analysis of 12 Case Studies

    ERIC Educational Resources Information Center

    Freudenberg, Nicholas; Picard Bradley, Sarah; Serrano, Monica

    2009-01-01

    Industry practices such as advertising, production of unsafe products, and efforts to defeat health legislation play a major role in current patterns of U.S. ill health. Changing these practices may be a promising strategy to promote health. The authors analyze 12 campaigns designed to modify the health-related practices of U.S. corporations in…

  11. Adapting the Trials of Improved Practices (TIPs) approach to explore the acceptability and feasibility of nutrition and parenting recommendations: what works for low-income families?

    PubMed

    Dickin, Katherine L; Seim, Gretchen

    2015-10-01

    Interventions to prevent childhood obesity must consider not only how child feeding behaviours are related to child weight status but also which behaviours parents are willing and able to change. This study adapted Trials of Improved Practices (TIPs) to assess acceptability and feasibility of nutrition and parenting recommendations, using in-depth interviews and household trials to explore families' experiences over time. A diverse sample of 23 low-income parents of 3-11-year-olds was recruited following participation in nutrition and parenting education. Parents chose nutrition and parenting practices to try at home and were interviewed 2 weeks and 4-6 months later about behaviour change efforts. Qualitative analysis identified emergent themes, and acceptability and feasibility were rated based on parents' willingness and ability to try new practices. The nutrition goal parents chose most frequently was increasing children's vegetable intake, followed by replacing sweetened beverages with water or milk, and limiting energy-dense foods. Parents were less inclined to reduce serving sizes. The parenting practices most often selected as applicable to nutrition goals were role-modelling; shaping home environments, often with other adults; involving children in decisions; and providing positive feedback. Most recommendations were viewed as acceptable by meaningful numbers of parents, many of whom tried and sustained new behaviours. Food preferences, habits and time were common barriers; family resistance or food costs also constrained some parents. Despite challenges, TIPs was successfully adapted to evaluate complex nutrition and parenting practices. Information on parents' willingness and ability to try practices provides valuable guidance for childhood obesity prevention programmes. © 2013 John Wiley & Sons Ltd.

  12. Best practices of Building Information Modelling (BIM) implementation in design phase for construction project

    NASA Astrophysics Data System (ADS)

    Kasim, N.; Zainal Abidin, N. A.; Zainal, R.; Sarpin, N.; Rahim, M. H. I. Abd; Saikah, M.

    2017-11-01

    Implementation of Building Information Modelling (BIM) was expected to bring improvement in current practices of Malaysian construction industry. In the design phase, there is a lack of a ready pool of skilled workers who are able to develop BIM strategic plan and effectively utilise it. These create boundaries for BIM nature in Malaysian construction industry specifically in the design phase to achieve its best practices. Therefore, the objectives of this research are to investigate the current practices of BIM implementation in the design phase as well as the best practices factors of BIM implementation in the design phase. The qualitative research approach is carried out through semi-structured interviews with the designers of different organisations which adopt BIM in the design phase. Data collection is analysed by executing content analysis method. From the findings, the best practices factors of BIM implementation in design phase such as the incentive for BIM training, formal approach to monitoring automated Level of Detailing (LOD), run a virtual meeting and improve Industry Foundation Class (IFC). Thus, best practices factors which lead to practices improvements in the design phase of project development which subsequently improves the implementation of BIM in the design phase of Malaysian construction industry.

  13. Evaluation of the Acceptance of Audience Response System by Corporations Using the Technology Acceptance Model

    NASA Astrophysics Data System (ADS)

    Chu, Hsing-Hui; Lu, Ta-Jung; Wann, Jong-Wen

    The purpose of this research is to explore enterprises' acceptance of Audience Response System (ARS) using Technology Acceptance Model (TAM). The findings show that (1) IT characteristics and facilitating conditions could be external variables of TAM. (2) The degree of E-business has positive significant correlation with behavioral intention of employees. (3) TAM is a good model to predict and explain IT acceptance. (4) Demographic variables, industry and firm characteristics have no significant correlation with ARS acceptance. The results provide useful information to managers and ARS providers that (1) ARS providers should focus more on creating different usages to enhance interactivity and employees' using intention. (2) Managers should pay attention to build sound internal facilitating conditions for introducing IT. (3) According to the degree of E-business, managers should set up strategic stages of introducing IT. (4) Providers should increase product promotion and also leverage academic and government to promote ARS.

  14. "Fighting a hurricane": tobacco industry efforts to counter the perceived threat of Islam.

    PubMed

    Petticrew, Mark; Lee, Kelley; Ali, Haider; Nakkash, Rima

    2015-06-01

    Islamic countries are of key importance to transnational tobacco companies as growing markets with increasing smoking rates. We analyzed internal tobacco industry documents to assess the industry's response to rising concerns about tobacco use within Islamic countries. The tobacco industry perceived Islam as a significant threat to its expansion into these emerging markets. To counter these concerns, the industry framed antismoking views in Islamic countries as fundamentalist and fanatical and attempted to recruit Islamic consultants to portray smoking as acceptable. Tobacco industry lawyers also helped develop theological arguments in favor of smoking. These findings are valuable to researchers and policymakers seeking to implement culturally appropriate measures in Islamic countries under the World Health Organization Framework Convention on Tobacco Control.

  15. A qualitative approach exploring the acceptability of yoga for minorities living with arthritis: 'Where are the people who look like me?'

    PubMed

    Middleton, Kimberly R; Magaña López, Miriam; Haaz Moonaz, Steffany; Tataw-Ayuketah, Gladys; Ward, Michael M; Wallen, Gwenyth R

    2017-04-01

    To examine the acceptability of yoga research tailored to recruit and retain a minority population (both English and Spanish speaking) with arthritis. Yoga research for arthritis often underrepresents minorities and acceptability for this population has not previously been investigated. Acceptability was evaluated using retention, adherence, journals, and semi-structured exit interviews from twelve participants with osteoarthritis or rheumatoid arthritis undergoing an 8-week yoga intervention. Journal quotes were analyzed using content analysis techniques. NVivo software was used to organize transcripts and assemble themes. Two methods of triangulation (data and investigator) were used to overcome potential bias from a single-perspective interpretation. Exit interview comments were content analyzed using a card sort method. The study was designed with a cultural infrastructure including a multicultural research team, translators, and bilingual materials and classes, to facilitate trust and acceptability for primarily Hispanic and Black/African-American adults. Washington, D.C. metropolitan area, USA. On average participants attended 10 of 16 classes, with home practice 2-3days a week. All who completed were still practicing yoga three-months later. Qualitative narrative analysis identified major themes related to facilitating factors and barriers for yoga practice, self-efficacy, and support. Participant comments indicated that offering an arthritis-based yoga intervention and using a culturally congruent research design was found to be acceptable. As yoga research grows, there is a need to understand and promote acceptability for typically under-represented populations. This study attempts to inform the expansion of multicultural research designed to recruit and retain those from diverse backgrounds. Published by Elsevier Ltd.

  16. An exploration of complementary feeding of infants and young children in the rural area of Muhoroni, Nyanza province, Kenya: a descriptive study.

    PubMed

    Harvey, Sophie; Callaby, Jo; Roberts, Lesley

    2017-08-01

    Inappropriate infant and young child feeding practices contribute to malnutrition, infection and long-term development limitation. To explore complementary feeding and food safety in Muhoroni District, Nyanza Province in rural Kenya. To compare practices with the Infant and Young Child Feeding (IYCF) guidelines, and identify associations with inappropriate practices. Between January and April 2014, a questionnaire completed by primary caregivers of children aged 6-23 months asked about foods the child had received in the previous 24 hours, the introduction of complementary foods, and the food hygiene practices undertaken by the caregiver. The most recent World Health Organization IYCF core indicators (continued breastfeeding at 1 year; minimum dietary diversity; minimum meal frequency; minimum acceptable diet) were determined for 400 children. These indicators were compared with demographic indicators in multivariate analyses to identify associations with appropriate complementary feeding practices. A total of 55.2% of children aged 12-15 months continued to be breastfed at the time of questioning. Of the study population, 61.5% achieved minimum dietary diversity, 70.8% achieved minimum meal frequency and 43.0% achieved minimum acceptable diet. Older children were more likely to achieve minimum dietary diversity and minimum acceptable diet; however, they were also less likely to achieve minimum meal frequency. High levels of hygiene practices were reported in all areas of food safety. Complementary feeding indicators were higher than nationally, although less than half of children (43.0%) were receiving a minimum acceptable diet. Further work should explore the potential relationship between age and adequate infant feeding.

  17. EXECUTIVE LEADERSHIP AND DEVELOPMENT (IN INDUSTRIAL PSYCHOLOGY BY B. VONHALLER GILMER AND OTHERS. NEW YORK, MCGRAW-HILL, 1966/ 228-253).

    ERIC Educational Resources Information Center

    HILTON, THOMAS L.

    THIS CHAPTER FROM A LARGER WORK ON INDUSTRIAL PSYCHOLOGY DISCUSSES LEADERSHIP STEREOTYPES AND CONCEPTIONS, EMPIRICAL EVIDENCE OF ACTUAL LEADERSHIP FUNCTIONS, THE SELECTION OF POTENTIAL EXECUTIVES, AND METHODS OF EXECUTIVE DEVELOPMENT. THE MAJOR PROBLEM OF LEADERSHIP IS TO CREATE SITUATIONS IN WHICH FOLLOWERS WILLINGLY ACCEPT THE LEADER AS THEIR…

  18. Box-ticking and Olympic high jumping - Physicians' perceptions and acceptance of national physician validation systems.

    PubMed

    Sehlbach, Carolin; Govaerts, Marjan J B; Mitchell, Sharon; Rohde, Gernot G U; Smeenk, Frank W J M; Driessen, Erik W

    2018-05-24

    National physician validation systems aim to ensure lifelong learning through periodic appraisals of physicians' competence. Their effectiveness is determined by physicians' acceptance of and commitment to the system. This study, therefore, sought to explore physicians' perceptions and self-reported acceptance of validation across three different physician validation systems in Europe. Using a constructivist grounded-theory approach, we conducted semi-structured interviews with 32 respiratory specialists from three countries with markedly different validation systems: Germany, which has a mandatory, credit-based system oriented to continuing professional development; Denmark, with mandatory annual dialogs and ensuing, non-compulsory activities; and the UK, with a mandatory, portfolio-based revalidation system. We analyzed interview data with a view to identifying factors influencing physicians' perceptions and acceptance. Factors that influenced acceptance were the assessment's authenticity and alignment of its requirements with clinical practice, physicians' beliefs about learning, perceived autonomy, and organizational support. Users' acceptance levels determine any system's effectiveness. To support lifelong learning effectively, national physician validation systems must be carefully designed and integrated into daily practice. Involving physicians in their design may render systems more authentic and improve alignment between individual ambitions and the systems' goals, thereby promoting acceptance.

  19. Influence of lactation stage and some flock management practices on sensory characteristics of goat milk from Brazilian Saanen breed.

    PubMed

    de Cássia Ramos do Egypto Queiroga, Rita; Costa, Roberto Germano; Madruga, Marta Suely; de Medeiros, Ariosvaldo Nunes; Dos Santos Garruti, Deborah; Magnani, Marciane; de Souza, Evandro Leite

    2016-04-01

    This study evaluated the influence of lactation stage (early, middle, late) and management practices (milking hygiene and buck presence) on the sensory attributes of Saanen goat milk. Goats were randomly divided in four groups in respect of different milking sanitary procedures and the presence/absence of the buck in the barn. Milk samples were analyzed for sensory attributes including quantitative descriptive analysis (QDA) and acceptance. The milking hygiene practice caused no significant influence on microbiological parameters. Results of QDA revealed that the buck presence increased the characteristic odor of milk at the middle and late lactation stages. The off-odor and off-flavor descriptors showed a distinct response since a higher intensity of these sensory characteristics was noted in the samples obtained from goats maintained without the buck. Odor and flavor contributed most in characterizing the different samples regardless of the management practice and lactation stage. The acceptance of odor showed to be influenced only by the lactation stage, while the acceptance of flavor was only through the presence of the buck. Odor acceptance correlated negatively to off-odor and off-flavor, suggesting that these two sensory attributes impaired the preference for the aroma of the milk samples. © 2015 Japanese Society of Animal Science.

  20. The role of productivity in improving the environmental sustainability of ruminant production systems.

    PubMed

    Capper, Judith L; Bauman, Dale E

    2013-01-01

    The global livestock industry is charged with providing sufficient animal source foods to supply the global population while improving the environmental sustainability of animal production. Improved productivity within dairy and beef systems has demonstrably reduced resource use and greenhouse gas emissions per unit of food over the past century through the dilution of maintenance effect. Further environmental mitigation effects have been gained through the current use of technologies and practices that enhance milk yield or growth in ruminants; however, the social acceptability of continued intensification and use of productivity-enhancing technologies is subject to debate. As the environmental impact of food production continues to be a significant issue for all stakeholders within the field, further research is needed to ensure that comparisons among foods are made based on both environmental impact and nutritive value to truly assess the sustainability of ruminant products.

  1. The physician as a manager.

    PubMed

    McDonagh, T J

    1982-02-01

    The practice of occupational medicine has undergone considerable change over the last decade. Increased awareness of potential health hazards associated with the workplace and its products and wastes, the interest of society and workers in these subjects, and related governmental regulation have resulted in expanded occupational health programs within industry. The occupational physician has become a key company resource in the optimal management of the business impacts of health-related issues. Health-related matters often have noteworthy business implications, and the occupational physician needs to spend considerable time as a manager in the planning, resourcing, implementation, evaluation, and stewardship of programs. Thus he is experiencing greater demands and often is inadequately prepared for this nonclinical, nonscientific role. Therefore, the preparation of occupational physicians to assume such managerial responsibilities needs to receive high priority. The physician must be willing to accept this challenge both to ensure the program's success and to retain a leadership position in occupational health programs.

  2. Doping graphene films via chemically mediated charge transfer.

    PubMed

    Ishikawa, Ryousuke; Bando, Masashi; Morimoto, Yoshitaka; Sandhu, Adarsh

    2011-01-31

    Transparent conductive films (TCFs) are critical components of a myriad of technologies including flat panel displays, light-emitting diodes, and solar cells. Graphene-based TCFs have attracted a lot of attention because of their high electrical conductivity, transparency, and low cost. Carrier doping of graphene would potentially improve the properties of graphene-based TCFs for practical industrial applications. However, controlling the carrier type and concentration of dopants in graphene films is challenging, especially for the synthesis of p-type films. In this article, a new method for doping graphene using the conjugated organic molecule, tetracyanoquinodimethane (TCNQ), is described. Notably, TCNQ is well known as a powerful electron accepter and is expected to favor electron transfer from graphene into TCNQ molecules, thereby leading to p-type doping of graphene films. Small amounts of TCNQ drastically improved the resistivity without degradation of optical transparency. Our carrier doping method based on charge transfer has a huge potential for graphene-based TCFs.

  3. Preparing Students for Careers in Science and Industry with Computational Physics

    NASA Astrophysics Data System (ADS)

    Florinski, V. A.

    2011-12-01

    Funded by NSF CAREER grant, the University of Alabama (UAH) in Huntsville has launched a new graduate program in Computational Physics. It is universally accepted that today's physics is done on a computer. The program blends the boundary between physics and computer science by teaching student modern, practical techniques of solving difficult physics problems using diverse computational platforms. Currently consisting of two courses first offered in the Fall of 2011, the program will eventually include 5 courses covering methods for fluid dynamics, particle transport via stochastic methods, and hybrid and PIC plasma simulations. The UAH's unique location allows courses to be shaped through discussions with faculty, NASA/MSFC researchers and local R&D business representatives, i.e., potential employers of the program's graduates. Students currently participating in the program have all begun their research careers in space and plasma physics; many are presenting their research at this meeting.

  4. Toward exascale production of recombinant adeno-associated virus for gene transfer applications.

    PubMed

    Cecchini, S; Negrete, A; Kotin, R M

    2008-06-01

    To gain acceptance as a medical treatment, adeno-associated virus (AAV) vectors require a scalable and economical production method. Recent developments indicate that recombinant AAV (rAAV) production in insect cells is compatible with current good manufacturing practice production on an industrial scale. This platform can fully support development of rAAV therapeutics from tissue culture to small animal models, to large animal models, to toxicology studies, to Phase I clinical trials and beyond. Efforts to characterize, optimize and develop insect cell-based rAAV production have culminated in successful bioreactor-scale production of rAAV, with total yields potentially capable of approaching the exa-(10(18)) scale. These advances in large-scale AAV production will allow us to address specific catastrophic, intractable human diseases such as Duchenne muscular dystrophy, for which large amounts of recombinant vector are essential for successful outcome.

  5. Photovoltaic central station step and touch potential considerations in grounding system design

    NASA Technical Reports Server (NTRS)

    Engmann, G.

    1983-01-01

    The probability of hazardous step and touch potentials is an important consideration in central station grounding system design. Steam turbine generating station grounding system design is based on accepted industry practices and there is extensive in-service experience with these grounding systems. A photovoltaic (PV) central station is a relatively new concept and there is limited experience with PV station grounding systems. The operation and physical configuration of a PV central station is very different from a steam electric station. A PV station bears some similarity to a substation and the PV station step and touch potentials might be addressed as they are in substation design. However, the PV central station is a generating station and it is appropriate to examine the effect that the differences and similarities of the two types of generating stations have on step and touch potential considerations.

  6. Land and Law in Marijuana Country: Clean Capital, Dirty Money, and the Drug War’s Rentier Nexus

    PubMed Central

    Polson, Michael

    2015-01-01

    Despite its ongoing federal illegality, marijuana production has become a licit, or socially accepted, feature of northern California’s real estate market. As such, marijuana is a key component of land values and the laundering of “illegal” wealth into legitimate circulation. By following land transaction practices, relations, and instruments, this article shows how formally equal property transactions become substantively unequal in light of the “il/legal” dynamics of marijuana land use. As marijuana becomes licit, prohibitionist policies have enabled the capture of ground rent by landed interests from the marijuana industry at a time when the price of marijuana is declining (in part due to its increasing licitness). The resulting “drug war rentier nexus,” a state–land–finance complex, is becoming a key, if obscured, component within marijuana’s contemporary political economy. PMID:26594104

  7. Quality evaluation of rice bran protein isolate-based weaning food for preschoolers.

    PubMed

    Khan, Saima H; Butt, Masood S; Anjum, Faqir M; Sameen, Ayesha

    2011-05-01

    Agro-industrial waste 'rice bran' was stabilized and the extracted protein isolates were used as ingredients to make nutritive complimentary food for the growing infants. The formulation processed through drum drying and the starchy ingredients were pregelatinized to reduce bulk in the prepared meal and facilitate spoon-feeding. The formulations had uniform texture, light golden color and good paste consistency. Nutrient composition was good enough to meet standards for supplementary infant foods. Caloric value remained up to 416 kcal/100 g with spoonable viscosity and 80.90-84.45% in vitro digestibility. A single meal could substantially contribute to the daily essential amino acid requirement. The formulation had good acceptability during a short-term infant-feeding trial. The present study can provide practical guideline for manufacturers as well as the nutritionist for the use of an economical and nutritive formulation for young children.

  8. The role of physicians as medical review officers in workplace drug testing programs. In pursuit of the last nanogram.

    PubMed Central

    Clark, H W

    1990-01-01

    In discussing the role of physicians in workplace drug testing programs, I focus on the recent Department of Transportation regulations that require drug testing in such regulated industries as interstate trucking, air transportation, mass transit, and the railroads. These regulations require that applicable drug testing programs employ physicians as medical review officers to evaluate positive tests that have been screened and confirmed by different techniques to determine if there is a legal medical explanation for the result. The drug testing program tests for the presence of amphetamine, cocaine, tetrahydrocannabinol, opiates, and phencyclidine. If an employee testing positive has an acceptable medical explanation, the result is to be reported as negative. Little practical advice exists for medical review officers, and they must be aware of key elements of the regulations and potential trouble spots. PMID:2190419

  9. Viral Vectors for In Vivo Gene Transfer in Parkinson’s disease: Properties and Clinical Grade Production

    PubMed Central

    Burger, Corinna; Snyder, Richard O.

    2009-01-01

    Because Parkinson’s disease is a progressive degenerative disorder that is mainly confined to the basal ganglia, gene transfer to deliver therapeutic molecules is an attractive treatment avenue. The present review focuses on direct in vivo gene transfer vectors that have been developed to a degree that they have been successfully used in animal model of Parkinson’s disease. Accordingly, the properties of recombinant adenovirus, recombinant adeno-associated virus, herpes simplex virus, and lentivirus are described and contrasted. In order for viral vectors to be developed into clinical grade reagents, they must be manufactured and tested to precise regulatory standards. Indeed, clinical lots of viral vectors can be produced in compliance with current Good Manufacturing Practices (cGMPs) regulations using industry accepted manufacturing methodologies, manufacturing controls, and quality systems. The viral vector properties themselves combined with physiological product formulations facilitate long-term storage and direct in vivo administration. PMID:17916354

  10. Writers and Publishers Guide to Texas Markets. Third Edition, Revised and Updated. Practical Guide Series, Volume I.

    ERIC Educational Resources Information Center

    1993

    This book provides information on over 590 Texas markets for writers. The book lists book publishers; magazines, journals, and newspapers which accept freelance articles; writers' groups and publishers' organizations; screenwriting/playwriting markets accepting scripts; daily, weekly, and minority newspapers which accept op-eds, book reviews, and…

  11. Genres Across Cultures: Types of Acceptability Variation

    ERIC Educational Resources Information Center

    Shaw, Philip; Gillaerts, Paul; Jacobs, Everett; Palermo, Ofelia; Shinohara, Midori; Verckens, J. Piet

    2004-01-01

    One can ask four questions about genre validity across cultures. Does a certain form or configuration occur in the culture in question? Is it acceptable? If acceptable, is it in practice preferred? Is it recommended by prescriptive authorities? This paper reports the results of an attempt to answer these questions empirically by testing the…

  12. 10 CFR 2.643 - Acceptance and docketing of application for limited work authorization.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... acceptable for processing, the Director of New Reactors or the Director of Nuclear Reactor Regulation will... 10 Energy 1 2013-01-01 2013-01-01 false Acceptance and docketing of application for limited work authorization. 2.643 Section 2.643 Energy NUCLEAR REGULATORY COMMISSION AGENCY RULES OF PRACTICE AND PROCEDURE...

  13. Thirty years of North American wind energy acceptance research: What have we learned?

    DOE PAGES

    Rand, Joseph; Hoen, Ben

    2017-05-25

    Thirty years of North American research on public acceptance of wind energy has produced important insights, yet knowledge gaps remain. This review synthesizes the literature, revealing the following lessons learned. (1) North American support for wind has been consistently high. (2) The NIMBY explanation for resistance to wind development is invalid. (3) Socioeconomic impacts of wind development are strongly tied to acceptance. (4) Sound and visual impacts of wind facilities are strongly tied to annoyance and opposition, and ignoring these concerns can exacerbate conflict. (5) Environmental concerns matter, though less than other factors, and these concerns can both help andmore » hinder wind development. (6) Issues of fairness, participation, and trust during the development process influence acceptance. (7) Distance from turbines affects other explanatory variables, but alone its influence is unclear. (8) Viewing opposition as something to be overcome prevents meaningful understandings and implementation of best practices. (9) Implementation of research findings into practice has been limited. The paper also identifies areas for future research on wind acceptance. With continued research efforts and a commitment toward implementing research findings into developer and policymaker practice, conflict and perceived injustices around proposed and existing wind energy facilities might be significantly lessened.« less

  14. Thirty years of North American wind energy acceptance research: What have we learned?

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rand, Joseph; Hoen, Ben

    Thirty years of North American research on public acceptance of wind energy has produced important insights, yet knowledge gaps remain. This review synthesizes the literature, revealing the following lessons learned. (1) North American support for wind has been consistently high. (2) The NIMBY explanation for resistance to wind development is invalid. (3) Socioeconomic impacts of wind development are strongly tied to acceptance. (4) Sound and visual impacts of wind facilities are strongly tied to annoyance and opposition, and ignoring these concerns can exacerbate conflict. (5) Environmental concerns matter, though less than other factors, and these concerns can both help andmore » hinder wind development. (6) Issues of fairness, participation, and trust during the development process influence acceptance. (7) Distance from turbines affects other explanatory variables, but alone its influence is unclear. (8) Viewing opposition as something to be overcome prevents meaningful understandings and implementation of best practices. (9) Implementation of research findings into practice has been limited. The paper also identifies areas for future research on wind acceptance. With continued research efforts and a commitment toward implementing research findings into developer and policymaker practice, conflict and perceived injustices around proposed and existing wind energy facilities might be significantly lessened.« less

  15. Covering their butts: responses to the cigarette litter problem.

    PubMed

    Smith, Elizabeth A; McDaniel, Patricia A

    2011-03-01

    Cigarette butt litter is a potential target of tobacco control. In addition to its toxicity and non-biodegradability, it can justify environmental regulation and policies that raise the price of tobacco and further denormalise its use. This paper examines how the tobacco industry has managed the cigarette butt litter issue and how the issue has been covered in the media. We searched the Legacy Tobacco Documents Library (http://legacy.library.ucsf.edu/) using a snowball strategy. We analysed data from approximately 700 documents, dated 1959-2006, using an interpretive approach. We also searched two newspaper databases, Lexis/Nexis and Newsbank, and found 406 relevant articles, dated 1982-2009 which we analysed quantitatively and qualitatively. The tobacco industry monitored and developed strategies for dealing with the cigarette litter issue because it affected the social acceptability of smoking, created the potential for alliances between tobacco control and environmental advocates, and created a target for regulation. The industry developed anti-litter programs with Keep America Beautiful (KAB) and similar organisations. Media coverage focused on industry-acceptable solutions, such as volunteer clean-ups and installation of ashtrays; stories that mentioned KAB were also more frequently positive towards the tobacco industry. Among alternative approaches, clean outdoor air (COA) laws received the most media attention. Cigarette litter, like secondhand smoke, is the result of smoker behaviour and affects nonsmokers. The tobacco industry has tried and failed to mitigate the impact of cigarette litter. Tobacco control advocates should explore alliances with environmental groups and propose policy options that hold the industry accountable for cigarette waste.

  16. Acceptance sampling for attributes via hypothesis testing and the hypergeometric distribution

    NASA Astrophysics Data System (ADS)

    Samohyl, Robert Wayne

    2017-10-01

    This paper questions some aspects of attribute acceptance sampling in light of the original concepts of hypothesis testing from Neyman and Pearson (NP). Attribute acceptance sampling in industry, as developed by Dodge and Romig (DR), generally follows the international standards of ISO 2859, and similarly the Brazilian standards NBR 5425 to NBR 5427 and the United States Standards ANSI/ASQC Z1.4. The paper evaluates and extends the area of acceptance sampling in two directions. First, by suggesting the use of the hypergeometric distribution to calculate the parameters of sampling plans avoiding the unnecessary use of approximations such as the binomial or Poisson distributions. We show that, under usual conditions, discrepancies can be large. The conclusion is that the hypergeometric distribution, ubiquitously available in commonly used software, is more appropriate than other distributions for acceptance sampling. Second, and more importantly, we elaborate the theory of acceptance sampling in terms of hypothesis testing rigorously following the original concepts of NP. By offering a common theoretical structure, hypothesis testing from NP can produce a better understanding of applications even beyond the usual areas of industry and commerce such as public health and political polling. With the new procedures, both sample size and sample error can be reduced. What is unclear in traditional acceptance sampling is the necessity of linking the acceptable quality limit (AQL) exclusively to the producer and the lot quality percent defective (LTPD) exclusively to the consumer. In reality, the consumer should also be preoccupied with a value of AQL, as should the producer with LTPD. Furthermore, we can also question why type I error is always uniquely associated with the producer as producer risk, and likewise, the same question arises with consumer risk which is necessarily associated with type II error. The resolution of these questions is new to the literature. The article presents R code throughout.

  17. Codes of environmental management practice: Assessing their potential as a tool for change

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nash, J.; Ehrenfeld, J.

    1997-12-31

    Codes of environmental management practice emerged as a tool of environmental policy in the late 1980s. Industry and other groups have developed codes for two purposes: to change the environmental behavior of participating firms and to increase public confidence in industry`s commitment to environmental protection. This review examines five codes of environmental management practice: Responsible Care, the International Chamber of Commerce`s Business Charter for Sustainable Development, ISO 14000, the CERES Principles, and The Natural Step. The first three codes have been drafted and promoted primarily by industry; the others have been developed by non-industry groups. These codes have spurred participatingmore » firms to introduce new practices, including the institution of environmental management systems, public environmental reporting, and community advisory panels. The extent to which codes are introducing a process of cultural change is considered in terms of four dimensions: new consciousness, norms, organization, and tools. 94 refs., 3 tabs.« less

  18. View from the top: CEO perspectives on executive development and succession planning practices in healthcare organizations.

    PubMed

    Groves, Kevin S

    2006-01-01

    Many healthcare professionals question whether the industry's hospitals and multi-site systems are implementing the necessary executive development and succession planning systems to ensure that high potential managers are prepared and aptly selected to assume key executive roles. Survey data, case studies, and cross-industry comparisons suggest that healthcare organizations may face a leadership crisis as the current generation of chief executive officers (CEOs) nears retirement while traditional means of developing the leadership pipeline, including middle-management positions and graduate programs requiring formal residencies, continue to dissipate. Given the daunting challenges that accompany the healthcare industry's quest to identify, develop, and retain leadership talent, this article provides best practice findings from a qualitative study of 13 healthcare organizations with a record of exemplary executive development and succession planning practices. CEOs from six single-site hospitals, six healthcare systems, and one medical group were interviewed to identify industry best practices so that healthcare practitioners and educators may utilize the findings to enhance the industry's leadership capacity.

  19. The association between money and opinion in academic emergency medicine.

    PubMed

    Birkhahn, Robert H; Blomkalns, Andra; Klausner, Howard; Nowak, Richard; Raja, Ali S; Summers, Richard; Weber, Jim E; Briggs, William M; Arkun, Alp; Diercks, Deborah

    2010-05-01

    Financial conflicts of interest have come under increasing scrutiny in medicine, but their impact has not been quantified. Our objective was to use the results of a national survey of academic emergency medicine (EM) faculty to determine if an association between money and personal opinion exists. We conducted a web-based survey of EM faculty. Opinion questions were analyzed with regard to whether the respondent had either 1) received research grant money or 2) received money from industry as a speaker, consultant, or advisor. Responses were unweighted, and tests of differences in proportions were made using Chi-squared tests, with p<0.05 set for significance. We received responses from 430 members; 98 (23%) received research grants from industry, while 145 (34%) reported fee-for-service money. Respondents with research money were more likely to be comfortable accepting gifts (40% vs. 29%) and acting as paid consultants (50% vs. 37%). They had a more favorable attitude with regard to societal interactions with industry and felt that industry-sponsored lectures could be fair and unbiased (52% vs. 29%). Faculty with fee-for-service money mirrored those with research money. They were also more likely to believe that industry-sponsored research produces fair and unbiased results (61% vs. 45%) and less likely to believe that honoraria biased speakers (49% vs. 69%). Accepting money for either service or research identified a distinct population defined by their opinions. Faculty engaged in industry-sponsored research benefitted socially (collaborations), academically (publications), and financially from the relationship.

  20. Tritordeum: a novel cereal for food processing with good acceptability and significant reduction in gluten immunogenic peptides in comparison with wheat.

    PubMed

    Vaquero, Luis; Comino, Isabel; Vivas, Santiago; Rodríguez-Martín, Laura; Giménez, María J; Pastor, Jorge; Sousa, Carolina; Barro, Francisco

    2018-04-01

    Tritordeum is a novel cereal obtained from the hybridization between durum wheat and a wild barley. This study evaluates acceptance, digestibility and immunotoxic properties of tritordeum, a novel cereal for food processing. Nineteen healthy volunteers participated in a study with different diets to compare tritordeum bread with wheat and gluten-free breads. Tritordeum breads had a similar acceptance to the wheat bread usually consumed, and the acceptance was significantly higher than the gluten-free bread and standardized wheat bread supplied in the study. There was no evidence for gastrointestinal symptoms among volunteers during the study. The reductions in the numbers of immunogenic epitopes in tritordeum in comparison with wheat were 78% for α-gliadins, 57% for γ-gliadins and 93% for ω-gliadins. The analysis of gluten immunogenic peptides (GIP) in stool samples showed a significantly lower excretion in the tritordeum ingestion phase than in the wheat ingestion phase. These results suggest that tritordeum may be an option of interest for general food processing, and especially for those who want to reduce their intake of gluten. However, it is not suitable for celiac disease sufferers as it contains gluten. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  1. Development of a prediction model on the acceptance of electronic laboratory notebooks in academic environments.

    PubMed

    Kloeckner, Frederik; Farkas, Robert; Franken, Tobias; Schmitz-Rode, Thomas

    2014-04-01

    Documentation of research data plays a key role in the biomedical engineering innovation processes. It makes an important contribution to the protection of intellectual property, the traceability of results and fulfilling the regulatory requirement. Because of the increasing digitalization in laboratories, an electronic alternative to the commonly-used paper-bound notebooks could contribute to the production of sophisticated documentation. However, compared to in an industrial environment, the use of electronic laboratory notebooks is not widespread in academic laboratories. Little is known about the acceptance of an electronic documentation system and the underlying reasons for this. Thus, this paper aims to establish a prediction model on the potential preference and acceptance of scientists either for paper-based or electronic documentation. The underlying data for the analysis originate from an online survey of 101 scientists in industrial, academic and clinical environments. Various parameters were analyzed to identify crucial factors for the system preference using binary logistic regression. The analysis showed significant dependency between the documentation system preference and the supposed workload associated with the documentation system (p<0.006; odds ratio=58.543) and an additional personal component. Because of the dependency of system choice on specific parameters it is possible to predict the acceptance of an electronic laboratory notebook before implementation.

  2. Relations between professional medical associations and healthcare industry, concerning scientific communication and continuing medical education: a policy statement from the European Society of Cardiology.

    PubMed

    2012-01-01

    Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry. Copyright © 2012. Published by Elsevier España.

  3. Photonics applications and web engineering: WILGA Winter 2016

    NASA Astrophysics Data System (ADS)

    Romaniuk, Ryszard S.

    2016-09-01

    Since twenty years, young researchers form the Institute of Electronic Systems, Warsaw University of Technology, organize two times a year, under only a marginal supervision of the senior faculty members, under the patronage of WEiTI PW, KEiT PAN, SPIE, IEEE, PKOpto SEP and PSF, the WILGA Symposium on advanced, integrated functional electronic, photonic and mechatronic systems [1-5]. All aspects are considered like: research and development, theory and design, technology - material and construction, software and hardware, commissioning and tests, as well as pilot and practical applications. The applications concern mostly, which turned after several years to be a proud specialization of the WILGA Symposium, Internet engineering, high energy physics experiments, new power industry including fusion, nuclear industry, space and satellite technologies, telecommunications, smart municipal environment, as well as biology and medicine [6-8]. XXXVIIth WILGA Symposium was held on 29-31 January 2016 and gathered a few tens of young researchers active in the mentioned research areas. There were presented a few tens of technical papers which will be published in Proc.SPIE together with the accepted articles from the Summer Edition of the WILGA Symposium scheduled for 29.05-06.06.2016. This article is a digest of chosen presentations from WILGA Symposium 2016 Winter Edition. The survey is narrowed to a few chosen and main topical tracks, like electronics and photonics design using industrial standards like ATCA/MTCA, also particular designs of functional systems using this series of industrial standards. The paper, summarizing traditionally since many years the accomplished WILGA Symposium organized by young researchers from Warsaw University of Technology, is also the following part of a cycle of papers concerning their participation in design of new generations of electronic systems used in discovery experiments in Poland and in leading research laboratories of the world.

  4. Relations between professional medical associations and the health-care industry, concerning scientific communication and continuing medical education: a policy statement from the European Society of Cardiology.

    PubMed

    2012-06-01

    Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry.

  5. Relations between professional medical associations and the health-care industry, concerning scientific communication and continuing medical education: a Policy Statement from the European Society of Cardiology.

    PubMed

    2012-03-01

    Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry.

  6. Industrial Adoption of Model-Based Systems Engineering: Challenges and Strategies

    NASA Astrophysics Data System (ADS)

    Maheshwari, Apoorv

    As design teams are becoming more globally integrated, one of the biggest challenges is to efficiently communicate across the team. The increasing complexity and multi-disciplinary nature of the products are also making it difficult to keep track of all the information generated during the design process by these global team members. System engineers have identified Model-based Systems Engineering (MBSE) as a possible solution where the emphasis is placed on the application of visual modeling methods and best practices to systems engineering (SE) activities right from the beginning of the conceptual design phases through to the end of the product lifecycle. Despite several advantages, there are multiple challenges restricting the adoption of MBSE by industry. We mainly consider the following two challenges: a) Industry perceives MBSE just as a diagramming tool and does not see too much value in MBSE; b) Industrial adopters are skeptical if the products developed using MBSE approach will be accepted by the regulatory bodies. To provide counter evidence to the former challenge, we developed a generic framework for translation from an MBSE tool (Systems Modeling Language, SysML) to an analysis tool (Agent-Based Modeling, ABM). The translation is demonstrated using a simplified air traffic management problem and provides an example of a potential quite significant value: the ability to use MBSE representations directly in an analysis setting. For the latter challenge, we are developing a reference model that uses SysML to represent a generic infusion pump and SE process for planning, developing, and obtaining regulatory approval of a medical device. This reference model demonstrates how regulatory requirements can be captured effectively through model-based representations. We will present another case study at the end where we will apply the knowledge gained from both case studies to a UAV design problem.

  7. Embryo deaths in reproduction and embryo research: a reply to Murphy's double effect argument.

    PubMed

    Devolder, Katrien

    2013-08-01

    The majority of embryos created in natural reproduction die spontaneously within a few weeks of conception. Some have argued that, therefore, if one believes the embryo is a person (in the normative sense) one should find 'natural' reproduction morally problematic. An extension of this argument holds that, if one accepts embryo deaths in natural reproduction, consistency requires that one also accepts embryo deaths that occur in (i) assisted reproduction via in vitro fertilisation (IVF) and (ii) embryo research. In a recent paper in this journal, Timothy Murphy criticises both the initial argument and its extension. Murphy argues that double-effect reasoning can justify embryo deaths both in natural reproduction and IVF, but not in embryo research. Thus, according to Murphy, one can, without being inconsistent, (1) believe the embryo is a person and accept natural reproduction and IVF, and (2) accept natural reproduction and IVF, while rejecting embryo research on the ground that it involves embryo deaths. I show that Murphy's argument is problematic because double effect cannot justify embryo deaths in standard IVF practices. The problem is that the proportionality criterion of double effect is not met by such practices. Thus, Murphy's argument fails to support (1) and (2). An implication of his argument failing to support (2) is that it does not defeat the position I have defended in the past-that if one accepts standard IVF practices one should also accept embryo research, including research with embryos created solely for that purpose.

  8. Lessons learned from the Apple stores.

    PubMed

    Pinkney, Henry; Baum, Neil

    2012-01-01

    Medical practices have an opportunity to improve the services that they offer their patients. Practices can look at other businesses and industries for examples of outstanding customer service. This article will discuss the services provided by Apple, Inc., and how medical practices can learn from this industry giant and improve the services that they offer patients.

  9. 75 FR 53639 - Best Practices for Transit, Transshipment, and Reexport of Items Subject to the Export...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-01

    ... principles and best practices that complement those already identified by BIS in its Web guidance ( http://www.bis.doc.gov/complianceandenforcement/emcp.htm ), and industry outreach regarding export management... application to the EAR. Principles These best practices are based on the following four principles: Industry...

  10. Temporal dominance of sensations and preferences of Brazilians and Slovakians: A cross-cultural study of cachaças stored with woods from the Amazon rainforest.

    PubMed

    Simioni, Síntia Carla Corrêa; Tovar, Diego Mercado; Rodrigues, Jéssica Ferreira; de Souza, Vanessa Rios; Nunes, Cleiton Antônio; Vietoris, Vladimir; Pinheiro, Ana Carla Marques

    2018-02-01

    Brazilians and Slovakians evaluated the temporal profile and the acceptability of cachaça stored with different woods (Cumarurana (CM), Jatobá (JT) and, Louro-vermelho (LV), which are found in the Amazon rainforest, and also oak), with the aim of performing a cross-cultural comparison of the dynamic profile of the attributes perceived in the cachaças and the sensorial acceptance of the samples. Important differences were observed between the temporal sensorial profiles generated by the two groups and their preferences. Brazilians preferred cachaças stored with the traditional wood, oak, followed by those stored with JT and CM. In contrast, Slovakians preferred cachaças stored with JT, followed by those stored with LV and oak. For both countries, the dominance of wood flavor and vanilla attributes at the end of the analysis time was positively associated with acceptance, while the dominance of off-flavors and the wood flavor attribute at the beginning of the analysis time was negatively associated with acceptance for Brazilians and Slovakians, respectively. Brazilians preferred cachaça stored with oak wood, and Slovakians preferred cachaça stored with JT wood, with acceptability being strongly associated with the dominance of wood flavor and vanilla attributes at the end of the evaluation time. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

  11. Integrated Display and Environmental Awareness System - System Architecture Definition

    NASA Technical Reports Server (NTRS)

    Doule, Ondrej; Miranda, David; Hochstadt, Jake

    2017-01-01

    The Integrated Display and Environmental Awareness System (IDEAS) is an interdisciplinary team project focusing on the development of a wearable computer and Head Mounted Display (HMD) based on Commercial-Off-The-Shelf (COTS) components for the specific application and needs of NASA technicians, engineers and astronauts. Wearable computers are on the verge of utilization trials in daily life as well as industrial environments. The first civil and COTS wearable head mounted display systems were introduced just a few years ago and they probed not only technology readiness in terms of performance, endurance, miniaturization, operability and usefulness but also maturity of practice in perspective of a socio-technical context. Although the main technical hurdles such as mass and power were addressed as improvements on the technical side, the usefulness, practicality and social acceptance were often noted on the side of a broad variety of humans' operations. In other words, although the technology made a giant leap, its use and efficiency still looks for the sweet spot. The first IDEAS project started in January 2015 and was concluded in January 2017. The project identified current COTS systems' capability at minimum cost and maximum applicability and brought about important strategic concepts that will serve further IDEAS-like system development.

  12. Evaluation of Margins of Safety in Brazed Joints

    NASA Technical Reports Server (NTRS)

    Flom, Yury; Wang, Len; Powell, Mollie M.; Soffa, Matthew A.; Rommel, Monica L.

    2009-01-01

    One of the essential steps in assuring reliable performance of high cost critical brazed structures is the assessment of the Margin of Safety (MS) of the brazed joints. In many cases the experimental determination of the failure loads by destructive testing of the brazed assembly is not practical and cost prohibitive. In such cases the evaluation of the MS is performed analytically by comparing the maximum design loads with the allowable ones and incorporating various safety or knock down factors imposed by the customer. Unfortunately, an industry standard methodology for the design and analysis of brazed joints has not been developed. This paper provides an example of an approach that was used to analyze an AlBeMet 162 (38%Be-62%Al) structure brazed with the AWS BAlSi-4 (Al-12%Si) filler metal. A practical and conservative interaction equation combining shear and tensile allowables was developed and validated to evaluate an acceptable (safe) combination of tensile and shear stresses acting in the brazed joint. These allowables are obtained from testing of standard tensile and lap shear brazed specimens. The proposed equation enables the assessment of the load carrying capability of complex brazed joints subjected to multi-axial loading.

  13. Rapid Analysis of Carbohydrates in Bioprocess Samples: An Evaluation of the CarboPac SA10 for HPAE-PAD Analysis by Interlaboratory Comparison

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sevcik, R. S.; Hyman, D. A.; Basumallich, L.

    2013-01-01

    A technique for carbohydrate analysis for bioprocess samples has been developed, providing reduced analysis time compared to current practice in the biofuels R&D community. The Thermofisher CarboPac SA10 anion-exchange column enables isocratic separation of monosaccharides, sucrose and cellobiose in approximately 7 minutes. Additionally, use of a low-volume (0.2 mL) injection valve in combination with a high-volume detection cell minimizes the extent of sample dilution required to bring sugar concentrations into the linear range of the pulsed amperometric detector (PAD). Three laboratories, representing academia, industry, and government, participated in an interlaboratory study which analyzed twenty-one opportunistic samples representing biomass pretreatment, enzymaticmore » saccharification, and fermentation samples. The technique's robustness, linearity, and interlaboratory reproducibility were evaluated and showed excellent-to-acceptable characteristics. Additionally, quantitation by the CarboPac SA10/PAD was compared with the current practice method utilizing a HPX-87P/RID. While these two methods showed good agreement a statistical comparison found significant quantitation difference between them, highlighting the difference between selective and universal detection modes.« less

  14. Virtual manufacturing in reality

    NASA Astrophysics Data System (ADS)

    Papstel, Jyri; Saks, Alo

    2000-10-01

    SMEs play an important role in manufacturing industry. But from time to time there is a shortage in resources to complete the particular order in time. Number of systems is introduced to produce digital information in order to support product and process development activities. Main problem is lack of opportunity for direct data transition within design system modules when needed temporary extension of design capacity (virtuality) or to implement integrated concurrent product development principles. The planning experience in the field is weakly used as well. The concept of virtual manufacturing is a supporting idea to solve this problem. At the same time a number of practical problems should be solved like information conformity, data transfer, unified technological concepts acceptation etc. In the present paper the proposed ways to solve the practical problems of virtual manufacturing are described. General objective is to introduce the knowledge-based CAPP system as missing module for Virtual Manufacturing in the selected product domain. Surface-centered planning concept based on STEP- based modeling principles, and knowledge-based process planning methodology will be used to gain the objectives. As a result the planning module supplied by design data with direct access, and supporting advising environment is expected. Mould producing SME would be as test basis.

  15. The BASE-Program—A Multidimensional Approach for Health Promotion in Companies

    PubMed Central

    Wollesen, Bettina; Menzel, Josefine; Lex, Heiko; Mattes, Klaus

    2016-01-01

    Multidimensional assessments for conducting interventions are needed to achieve positive health effects within companies. BASE is an acronym, consisting of B = “Bedarfsbestimmung” (requirements); A = “Arbeitsplatzorganisation” (organisation of work); S = “Schulung des belastungsverträglichen Alltagshandelns” (coaching preventive behaviour at work); E = “Eigenverantwortung und Selbstwirksamkeit” (self-responsibility and self-efficacy). It is a prevention program designed to avoid and reduce work-related musculoskeletal diseases. It was developed to support prevention strategies within companies. It comprises aspects of health protection, ergonomics, exercise and self-efficacy. A comprehensive assessment will identify strain e.g., musculoskeletal discomforts due to body positions or psychological stress. Moreover, the general health status, preferences and barriers for participating in health promotion programs are evaluated. This analysis leads to practical and goal-oriented recommendations and interventions which suit the needs of companies and employees. These are executed onsite in real workplace situations and involve the introduction of first-hand experience in behavioural change. Therefore, this practical approach enhances the employees’ acceptance and self-efficacy for health promotion. This can result in long-term health promoting behaviour. This article presents the outcome and sustainability effects of BASE in three different application fields (logistic, industrial and office workers). PMID:27941643

  16. An item-response theory approach to safety climate measurement: The Liberty Mutual Safety Climate Short Scales.

    PubMed

    Huang, Yueng-Hsiang; Lee, Jin; Chen, Zhuo; Perry, MacKenna; Cheung, Janelle H; Wang, Mo

    2017-06-01

    Zohar and Luria's (2005) safety climate (SC) scale, measuring organization- and group- level SC each with 16 items, is widely used in research and practice. To improve the utility of the SC scale, we shortened the original full-length SC scales. Item response theory (IRT) analysis was conducted using a sample of 29,179 frontline workers from various industries. Based on graded response models, we shortened the original scales in two ways: (1) selecting items with above-average discriminating ability (i.e. offering more than 6.25% of the original total scale information), resulting in 8-item organization-level and 11-item group-level SC scales; and (2) selecting the most informative items that together retain at least 30% of original scale information, resulting in 4-item organization-level and 4-item group-level SC scales. All four shortened scales had acceptable reliability (≥0.89) and high correlations (≥0.95) with the original scale scores. The shortened scales will be valuable for academic research and practical survey implementation in improving occupational safety. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  17. Hearing conservation practices in eight noisy industries

    NASA Astrophysics Data System (ADS)

    Daniell, William E.; Swan, Susan S.; Camp, Janice; Cohen, Martin; McDaniel, Mary M.; Stebbins, John; Leo, Robert

    2005-04-01

    This study evaluated noise exposures and hearing conservation practices at 76 companies in eight industries with high rates of workers' compensation claims for hearing loss. Nearly all companies had exposures that required a hearing conservation program, and more than half had exposures that required consideration of noise controls. The use of noise measurements and consideration of controls was low in all industries. The completeness of hearing conservation programs was strongly associated with the extent of exposure in an industry, although practices varied widely within industries. Most companies had substantial deficiencies. More than one-third did not conduct annual training, and training had shortcomings at many others. One-third had not conducted audiometry. Hearing protection was commonly underused. Reported use was highest at companies with relatively complete programs, and in industries where exposure was most prevalent and least intermittent. Many employees had difficulty estimating how often, and presumably when, their exposure was excessive. There is a need for new strategies to promote and maintain hearing conservation efforts in noisy industries. The industries with greatest margin for improvement are not the noisiest industries but those where exposure is moderate or intermittent. [Work supported by the National Institute for Occupational Safety and Health.

  18. Lunar COTS: An Economical and Sustainable Approach to Reaching Mars

    NASA Technical Reports Server (NTRS)

    Zuniga, Allison F.; Rasky, Daniel; Pittman, Robert B.; Zapata, Edgar; Lepsch, Roger

    2015-01-01

    The NASA COTS (Commercial Orbital Transportation Services) Program was a very successful program that developed and demonstrated cost-effective development and acquisition of commercial cargo transportation services to the International Space Station (ISS). The COTS acquisition strategy utilized a newer model than normally accepted in traditional procurement practices. This new model used Space Act Agreements where NASA entered into partnerships with industry to jointly share cost, development and operational risks to demonstrate new capabilities for mutual benefit. This model proved to be very beneficial to both NASA and its industry partners as NASA saved significantly in development and operational costs while industry partners successfully expanded their market share of the global launch transportation business. The authors, who contributed to the development of the COTS model, would like to extend this model to a lunar commercial services program that will push development of technologies and capabilities that will serve a Mars architecture and lead to an economical and sustainable pathway to transporting humans to Mars. Over the past few decades, several architectures for the Moon and Mars have been proposed and studied but ultimately halted or not even started due to the projected costs significantly exceeding NASA's budgets. Therefore a new strategy is needed that will fit within NASA's projected budgets and takes advantage of the US commercial industry along with its creative and entrepreneurial attributes. The authors propose a new COTS-like program to enter into partnerships with industry to demonstrate cost-effective, cis-lunar commercial services, such as lunar transportation, lunar ISRU operations, and cis-lunar propellant depots that can enable an economical and sustainable Mars architecture. Similar to the original COTS program, the goals of the proposed program, being notionally referred to as Lunar Commercial Orbital Transfer Services (LCOTS) program will be to: 1) reduce development and operational costs by sharing costs with industry; 2) create new markets in cis-lunar space to further reduce operational costs; and 3) enable NASA to develop an affordable and economical exploration Mars architecture. The paper will describe a plan for a proposed LCOTS program, its potential impact to an eventual Mars architecture and its many benefits to NASA, commercial space industry and the US economy.

  19. Value Frameworks in Oncology: Comparative Analysis and Implications to the Pharmaceutical Industry.

    PubMed

    Slomiany, Mark; Madhavan, Priya; Kuehn, Michael; Richardson, Sasha

    2017-07-01

    As the cost of oncology care continues to rise, composite value models that variably capture the diverse concerns of patients, physicians, payers, policymakers, and the pharmaceutical industry have begun to take shape. To review the capabilities and limitations of 5 of the most notable value frameworks in oncology that have emerged in recent years and to compare their relative value and application among the intended stakeholders. We compared the methodology of the American Society of Clinical Oncology (ASCO) Value Framework (version 2.0), the National Comprehensive Cancer Network Evidence Blocks, Memorial Sloan Kettering Cancer Center DrugAbacus, the Institute for Clinical and Economic Review Value Assessment Framework, and the European Society for Medical Oncology Magnitude of Clinical Benefit Scale, using a side-by-side comparative approach in terms of the input, scoring methodology, and output of each framework. In addition, we gleaned stakeholder insights about these frameworks and their potential real-world applications through dialogues with physicians and payers, as well as through secondary research and an aggregate analysis of previously published survey results. The analysis identified several framework-specific themes in their respective focus on clinical trial elements, breadth of evidence, evidence weighting, scoring methodology, and value to stakeholders. Our dialogues with physicians and our aggregate analysis of previous surveys revealed a varying level of awareness of, and use of, each of the value frameworks in clinical practice. For example, although the ASCO Value Framework appears nascent in clinical practice, physicians believe that the frameworks will be more useful in practice in the future as they become more established and as their outputs are more widely accepted. Along with patients and payers, who bear the burden of treatment costs, physicians and policymakers have waded into the discussion of defining value in oncology care, as well as pharmaceutical companies that seek to understand the impact of these value frameworks on each stakeholder, as they model the value and financial threshold of innovative, high-cost drugs.

  20. Defense programs beryllium good practice guide

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Herr, M.

    1997-07-01

    Within the DOE, it has recently become apparent that some contractor employees who have worked (or are currently working) with and around beryllium have developed chronic beryllium disease (CBD), an occupational granulomatous lung disorder. Respiratory exposure to aerosolized beryllium, in susceptible individuals, causes an immunological reaction that can result in granulomatous scarring of the lung parenchyma, shortness of breath, cough, fatigue, weight loss, and, ultimately, respiratory failure. Beryllium disease was originally identified in the 1940s, largely in the fluorescent light industry. In 1950, the Atomic Energy Commission (AEC) introduced strict exposure standards that generally curtailed both the acute and chronicmore » forms of the disease. Beginning in 1984, with the identification of a CBD case in a DOE contractor worker, there was increased scrutiny of both industrial hygiene practices and individuals in this workforce. To date, over 100 additional cases of beryllium-specific sensitization and/or CBD have been identified. Thus, a disease previously thought to be largely eliminated by the adoption of permissible exposure standards 45 years ago is still a health risk in certain workforces. This good practice guide forms the basis of an acceptable program for controlling workplace exposure to beryllium. It provides (1) Guidance for minimizing worker exposure to beryllium in Defense Programs facilities during all phases of beryllium-related work, including the decontamination and decommissioning (D&D) of facilities. (2) Recommended controls to be applied to the handling of metallic beryllium and beryllium alloys, beryllium oxide, and other beryllium compounds. (3) Recommendations for medical monitoring and surveillance of workers exposed (or potentially exposed) to beryllium, based on the best current understanding of beryllium disease and medical diagnostic tests available. (4) Site-specific safety procedures for all processes of beryllium that is likely to generate dusts, mists, fumes, or small particulates. A beryllium exposure control program should minimize airborne concentrations, the potential for and spread of contamination, the number of times individuals are exposed to beryllium, and the number of employees who may be potentially exposed.« less

  1. Does Medicaid Insurance Confer Adequate Access to Adult Orthopaedic Care in the Era of the Patient Protection and Affordable Care Act?

    PubMed

    Labrum, Joseph T; Paziuk, Taylor; Rihn, Theresa C; Hilibrand, Alan S; Vaccaro, Alexander R; Maltenfort, Mitchell G; Rihn, Jeffrey A

    2017-06-01

    A current appraisal of access to orthopaedic care for the adult patient receiving Medicaid is important, since Medicaid expansion was written into law by the Patient Protection and Affordable Care Act (PPACA). (1) Do orthopaedic practices provide varying access to orthopaedic care for simulated patients with Medicaid insurance versus private insurance in a blinded survey? (2) What are the surveyed state-by-state Medicaid acceptance rates for adult orthopaedic practices in the current era of Medicaid expansion set forth by the PPACA? (3) Do surveyed rates of access to orthopaedic care in the adult patient population vary across practice setting (private vs academic) or vary with different Medicaid physician reimbursement rates? (4) Are there differences in the surveyed Medicaid acceptance rates for adult orthopaedic practices in states that have expanded Medicaid coverage versus states that have foregone expansion? Simulated Patient Survey: We performed a telephone survey study of orthopaedic offices in four states with Medicaid expansion. In the survey, the caller assumed a fictitious identity as a 38-year-old male who experienced an ankle fracture 1 day before calling, and attempted to secure an appointment within 2 weeks. During initial contact, the fictitious patient reported Medicaid insurance status. One month later, the fictitious patient contacted the same orthopaedic practice and reported private insurance coverage status. National Orthopaedic Survey: Private and academic orthopaedic practices operating in each state in the United States were called and asked to complete a survey assessing their practice model of Medicaid insurance acceptance. State reimbursement rates for three different Current Procedural Terminology (CPT ®) codes were collected from state Medicaid agencies. Results Simulated Patient Survey: Offices were less likely to accept Medicaid than commercial insurance (30 of 64 [47%] versus 62 of 64 [97%]; odds ratio [OR], 0.0145; 95% CI, 0.00088-0.23639; p < 0.001), and patients with Medicaid were less likely to be offered an appointment within 2 weeks (23 of 64 [36%] versus 59 of 64 [89%]; OR, 0.0154; 95% CI, 0.00094- 0.251; p < 0.001). The Medicaid acceptance rates observed across states sampled in the simulated patient survey were 67% (Pennsylvania), 21% (New Jersey), 58% (Delaware), and 50% (Maryland) (p = 0.04). National Orthopaedic Survey: Adult patients with Medicaid insurance had limited access to care in 109 of 342 (32%) orthopaedic practices: 37% of private and 13% of academic practices (p < 0.001). Practices that accepted Medicaid received higher reimbursement for each CPT ®  code relative to those that did not and acceptance of Medicaid became increasingly more likely as reimbursement rates increased (99243: OR, 1.03, 95% CI, 1.02-1.04 per dollar, p < 0.001; 99213: OR, 1.05; 95% CI, 1.03-1.07 per dollar, p < 0.001; 28876: OR, 1.01, 95% CI, 1.00-1.01 per dollar, p < 0.001). For a given reimbursement rate, private practices were less likely to take an adult patient with Medicaid relative to an academic practice (99243: OR, 0.11, 95% CI, 0.04-0.33, p < 0.001; 99213: OR, 0.11, 95% CI, 0.04-0.32, p < 0.001; 27786: OR, 0.12, 95% CI, 0.04-0.35, p < 0.001). No difference was observed when comparing Medicaid acceptance rates for all practice types between states that have expanded their Medicaid program versus those that have not (OR, 1.02; 95% CI 0.62-1.70; p = 0.934). In this two-part survey study, we found that a simulated patient with commercial insurance was more likely to have their insurance accepted and to gain timely access to orthopaedic care than a patient with Medicaid. Academic practice setting and increased Medicaid reimbursement rates were associated with increased access to care for the patient with Medicaid. Inequality in access to orthopaedic care based on health insurance status likely exists for the adult patient with Medicaid. Furthermore, Medicaid expansion has likely realized minimal gains in access to care for the adult orthopaedic patient. Further research is needed in delineating the patient-payer selection criteria used by orthopaedic practices to aid policymakers in reforming the Medicaid program and comprehensibly addressing this access to care disparity. Level II, prognostic study.

  2. An evaluation of a pain education programme for physiotherapists in clinical practice.

    PubMed

    Monaghan, Jenni; Adams, Nicola; Fothergill, Melissa

    2018-03-01

    The present study evaluated the implementation and acceptability of a pain education programme delivered to physiotherapists in clinical practice. A pre-test/post-test design with 10 physiotherapists was employed. Descriptive and inferential statistics were used for outcome measure data. Focus groups were carried out with seven physiotherapists within 1 month post-intervention. These data were analysed using the framework approach. Ten musculoskeletal physiotherapists were recruited. It was possible to develop and deliver the intervention and this was found to be acceptable to physiotherapists within clinical practice. The study explored trends within outcome measures, and one was considered appropriate. The focus groups yielded three interlinked themes, which related to the impact of the programme: "providing a context for pain education", "influence on aspects of the patient-therapist encounter" and "logistics of the education programme in clinical practice". A pain education programme delivered to physiotherapists in clinical practice was both possible to deliver and acceptable to participants. A key strength of the programme was the applicability to real-life practice, which was valued by physiotherapists. While physiotherapists felt that pain neurophysiology education was important, they reported lacking confidence in implementing their pain neurophysiology knowledge with patients. Thus, more time is needed to focus on pain neurophysiology education, with the aim of increasing confidence with the application of this approach in clinical practice. Copyright © 2017 John Wiley & Sons, Ltd.

  3. Best Practices of Inclusion at the Elementary Level

    ERIC Educational Resources Information Center

    Wilson, Carolyn H.; Ellerbee, Keisha L.; Christian, Silas H.

    2011-01-01

    Having inclusion in a school makes every student feel like they are part of the school. The children with disabilities feel accepted and part of the class like everyone else. Students learn to work well with each other and accept differences. Children learn to accept everyone for who they are. The Philosophy of Inclusion website says, Children…

  4. Water pollutant fingerprinting tracks recent industrial transfer from coastal to inland China: A case study

    PubMed Central

    Zheng, Weiwei; Wang, Xia; Tian, Dajun; Jiang, Songhui; Andersen, Melvin E.; He, Genhsjeng; Crabbe, M. James C.; Zheng, Yuxin; Zhong, Yang; Qu, Weidong

    2013-01-01

    In recent years, China’s developed regions have transferred industries to undeveloped regions. Large numbers of unlicensed or unregistered enterprises are widespread in these undeveloped regions and they are subject to minimal regulation. Current methods for tracing industrial transfers in these areas, based on enterprise registration information or economic surveys, do not work. We have developed an analytical framework combining water fingerprinting and evolutionary analysis to trace the pollution transfer features between water sources. We collected samples in Eastern China (industrial export) and Central China (industrial acceptance) separately from two water systems. Based on the water pollutant fingerprints and evolutionary trees, we traced the pollution transfer associated with industrial transfer between the two areas. The results are consistent with four episodes of industrial transfers over the past decade. Our results also show likely types of the transferred industries - electronics, plastics, and biomedicines - that contribute to the water pollution transfer. PMID:23301152

  5. Water pollutant fingerprinting tracks recent industrial transfer from coastal to inland China: A case study

    NASA Astrophysics Data System (ADS)

    Zheng, Weiwei; Wang, Xia; Tian, Dajun; Jiang, Songhui; Andersen, Melvin E.; He, Genhsjeng; Crabbe, M. James C.; Zheng, Yuxin; Zhong, Yang; Qu, Weidong

    2013-01-01

    In recent years, China's developed regions have transferred industries to undeveloped regions. Large numbers of unlicensed or unregistered enterprises are widespread in these undeveloped regions and they are subject to minimal regulation. Current methods for tracing industrial transfers in these areas, based on enterprise registration information or economic surveys, do not work. We have developed an analytical framework combining water fingerprinting and evolutionary analysis to trace the pollution transfer features between water sources. We collected samples in Eastern China (industrial export) and Central China (industrial acceptance) separately from two water systems. Based on the water pollutant fingerprints and evolutionary trees, we traced the pollution transfer associated with industrial transfer between the two areas. The results are consistent with four episodes of industrial transfers over the past decade. Our results also show likely types of the transferred industries - electronics, plastics, and biomedicines - that contribute to the water pollution transfer.

  6. Coast Guard Proceedings. Volume 70, Number 3, Fall 2013

    DTIC Science & Technology

    2013-01-01

    author. Beach areas support recreation, culture, tourism , and provide opportunities for the public to connect with the ocean. U.S. Coast Guard photo...involvement — including the public, tribal leaders, industry, nonprofit and private groups, energy, rec- reational and commercial fishing, tourism ...industry, tourism , and energy). for marine planning to succeed, stakeholders must accept the planning goals. Additionally, long-term goals and visions

  7. Workplace road safety risk management: An investigation into Australian practices.

    PubMed

    Warmerdam, Amanda; Newnam, Sharon; Sheppard, Dianne; Griffin, Mark; Stevenson, Mark

    2017-01-01

    In Australia, more than 30% of the traffic volume can be attributed to work-related vehicles. Although work-related driver safety has been given increasing attention in the scientific literature, it is uncertain how well this knowledge has been translated into practice in industry. It is also unclear how current practice in industry can inform scientific knowledge. The aim of the research was to use a benchmarking tool developed by the National Road Safety Partnership Program to assess industry maturity in relation to risk management practices. A total of 83 managers from a range of small, medium and large organisations were recruited through the Victorian Work Authority. Semi-structured interviews aimed at eliciting information on current organisational practices, as well as policy and procedures around work-related driving were conducted and the data mapped onto the benchmarking tool. Overall, the results demonstrated varying levels of maturity of risk management practices across organisations, highlighting the need to build accountability within organisations, improve communication practices, improve journey management, reduce vehicle-related risk, improve driver competency through an effective workplace road safety management program and review organisational incident and infringement management. The findings of the study have important implications for industry and highlight the need to review current risk management practices. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. The commercial health insurance industry in an era of eroding employer coverage.

    PubMed

    Robinson, James C

    2006-01-01

    This paper analyzes the commercial health insurance industry in an era of weakening employer commitment to providing coverage and strengthening interest by public programs to offer coverage through private plans. It documents the willingness of the industry to accept erosion of employment-based enrollment rather than to sacrifice earnings, the movement of Medicaid beneficiaries into managed care, and the distribution of market shares in the employment-based, Medicaid, and Medicare markets. The profitability of the commercial health insurance industry, exceptionally strong over the past five years, will henceforth be linked to the budgetary cycles and political fluctuations of state and federal governments.

  9. Post-PharmD Industry Fellowship Opportunities and Proposed Guidelines for Uniformity

    PubMed Central

    Larochelle, Paul A.; Giang, Dan K.; Silva, Matthew A.; Kcomt, Marisol; Malloy, Michael J.; Kay, Stephen

    2009-01-01

    The focus of this paper is to examine the surge in the development of post-PharmD industry fellowships (ie, pharmacy fellowship programs sponsored by the biopharmaceutical or pharmaceutical industry). These post-PharmD training programs do not fit the currently accepted definition of a pharmacy fellowship; therefore, the authors propose a new and distinct definition to encompass these fellowships. The authors provide program examples to showcase the establishment of the post-PharmD industry fellowship institutional centers. Finally, the authors provide recommendations to create uniformity in the programs of this relatively new category of post-PharmD training. PMID:19513158

  10. Influence of Problem-Based Learning Strategy on Enhancing Student's Industrial Oriented Competences Learned: An Action Research on Learning Weblog Analysis

    ERIC Educational Resources Information Center

    Chung, Pansy; Yeh, Ron Chuen; Chen, Yi-Cheng

    2016-01-01

    In order to respond to the ever-changing global economic environment, the technological and vocational education system in Taiwan needs to be dramatically reformed to the changing needs of the domestic industrial structure. Integrating practical talents with practical industrial experiences and competences can help avoid discrepancy and close the…

  11. Educators in Industry: An Exploratory Study to Determine How Teacher Externships Influence K-12 Classroom Practices

    ERIC Educational Resources Information Center

    Bowen, Bradley; Shume, Teresa

    2018-01-01

    This exploratory study investigates the impacts of industry-based externships for K-12 teachers, and reports teachers' perspectives on how these experiences influenced K-12 classroom practices. The program of focus in this research study is the Educators in Industry: K-12 Externship Program. For four weeks in the summer, teacher-participants are…

  12. Bridging the Gap Between Validation and Implementation of Non-Animal Veterinary Vaccine Potency Testing Methods.

    PubMed

    Dozier, Samantha; Brown, Jeffrey; Currie, Alistair

    2011-11-29

    In recent years, technologically advanced high-throughput techniques have been developed that replace, reduce or refine animal use in vaccine quality control tests. Following validation, these tests are slowly being accepted for use by international regulatory authorities. Because regulatory acceptance itself has not guaranteed that approved humane methods are adopted by manufacturers, various organizations have sought to foster the preferential use of validated non-animal methods by interfacing with industry and regulatory authorities. After noticing this gap between regulation and uptake by industry, we began developing a paradigm that seeks to narrow the gap and quicken implementation of new replacement, refinement or reduction guidance. A systematic analysis of our experience in promoting the transparent implementation of validated non-animal vaccine potency assays has led to the refinement of our paradigmatic process, presented here, by which interested parties can assess the local regulatory acceptance of methods that reduce animal use and integrate them into quality control testing protocols, or ensure the elimination of peripheral barriers to their use, particularly for potency and other tests carried out on production batches.

  13. Understanding transferable supply chain lessons and practices to a "high-tech" industry using guidelines from a primary sector industry: a case study in the food industry supply chain.

    PubMed

    Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S

    2015-01-01

    Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.

  14. Choice and validation of a near infrared spectroscopic application for the identity control of starting materials. practical experience with the EU draft Note for Guidance on the use of near infrared spectroscopy by the pharmaceutical industry and the data to be forwarded in part II of the dossier for a marketing authorization.

    PubMed

    Vredenbregt, M J; Caspers, P W J; Hoogerbrugge, R; Barends, D M

    2003-11-01

    Recently the CPMP/CVMP sent out for consultation the draft Note for Guidance (dNfG) on the use of near infrared spectroscopy (NIRS) by the pharmaceutical industry and the data to be forwarded in part II of the dossier for a marketing authorization. We explored the practicability of this dNfG with respect to the verification of the correct identity of starting materials in a generic tablet-manufacturing site. Within the boundaries of the dNfG, a release procedure was developed for 12 substances containing structurally related compounds and substances differing only in particle size. For the method development literature data were also taken into consideration. Good results were obtained with wavelength correlation (WC), applied on raw spectra or second derivative spectra both without smoothing. The defined threshold of 0.98 for raw spectra differentiated between all molecular structures. Both methods were found to be robust over a period of 1 year. For the differentiation between the different particle sizes a subsequent second chemometric technique had to be used. Soft independent modelling of class analogy (SIMCA) with a probability level of 0.01 proved suitable. Internal and external validation I according to the dNfG showed no incorrect rejections or false acceptances. External validation II according to the dNfG was carried out with 95 potentially interfering substances from which 46 were tested experimentally. Macrogol 400 was not distinguished from macrogol 300. For the complete verification of the identity of macrogol 300 test A of the European Pharmacopoeia is needed in addition to the NIRS application. A release procedure developed with WC applied on raw spectra and SIMCA as a second method, which is different from the preferred method of the dNfG, was tested in practice with good results. We conclude that the dNfG has good practicability and that deviations from the preferred methods of the dNfG can also give good differentiation.

  15. Light Water Reactor Sustainability Program: Evaluation of Localized Cable Test Methods for Nuclear Power Plant Cable Aging Management Programs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Glass, Samuel W.; Fifield, Leonard S.; Hartman, Trenton S.

    This Pacific Northwest National Laboratory (PNNL) milestone report describes progress to date on the investigation of nondestructive test (NDE) methods focusing particularly on local measurements that provide key indicators of cable aging and damage. The work includes a review of relevant literature as well as hands-on experimental verification of inspection capabilities. As NPPs consider applying for second, or subsequent, license renewal (SLR) to extend their operating period from 60 years to 80 years, it important to understand how the materials installed in plant systems and components will age during that time and develop aging management programs (AMPs) to assure continuedmore » safe operation under normal and design basis events (DBE). Normal component and system tests typically confirm the cables can perform their normal operational function. The focus of the cable test program is directed toward the more demanding challenge of assuring the cable function under accident or DBE. Most utilities already have a program associated with their first life extension from 40 to 60 years. Regrettably, there is neither a clear guideline nor a single NDE that can assure cable function and integrity for all cables. Thankfully, however, practical implementation of a broad range of tests allows utilities to develop a practical program that assures cable function to a high degree. The industry has adopted 50% elongation at break (EAB) relative to the un-aged cable condition as the acceptability standard. All tests are benchmarked against the cable EAB test. EAB is a destructive test so the test programs must apply an array of other NDE tests to assure or infer the overall set of cable’s system integrity. These cable NDE programs vary in rigor and methodology. As the industry gains experience with the efficacy of these programs, it is expected that implementation practice will converge to a more common approach. This report addresses the range of local NDE cable tests that are or could be practically implemented in a field test situation. These tests include: visual, infrared thermography, interdigital capacitance, indenter, relaxation time indenter, dynamic mechanical analyzer, infrared/near-infrared spectrometry, ultrasound, and distributed fiber optic temperature measurement.« less

  16. Practical considerations in clinical strategy to support the development of injectable drug-device combination products for biologics.

    PubMed

    Li, Zhaoyang; Easton, Rachael

    2018-01-01

    The development of an injectable drug-device combination (DDC) product for biologics is an intricate and evolving process that requires substantial investments of time and money. Consequently, the commercial dosage form(s) or presentation(s) are often not ready when pivotal trials commence, and it is common to have drug product changes (manufacturing process or presentation) during clinical development. A scientifically sound and robust bridging strategy is required in order to introduce these changes into the clinic safely. There is currently no single developmental paradigm, but a risk-based hierarchical approach has been well accepted. The rigor required of a bridging package depends on the level of risk associated with the changes. Clinical pharmacokinetic/pharmacodynamic comparability or outcome studies are only required when important changes occur at a late stage. Moreover, an injectable DDC needs to be user-centric, and usability assessment in real-world clinical settings may be required to support the approval of a DDC. In this review, we discuss the common issues during the manufacturing process and presentation development of an injectable DDC and practical considerations in establishing a clinical strategy to address these issues, including key elements of clinical studies. We also analyze the current practice in the industry and review relevant and status of regulatory guidance in the DDC field.

  17. Practical considerations in clinical strategy to support the development of injectable drug-device combination products for biologics

    PubMed Central

    Easton, Rachael

    2018-01-01

    ABSTRACT The development of an injectable drug-device combination (DDC) product for biologics is an intricate and evolving process that requires substantial investments of time and money. Consequently, the commercial dosage form(s) or presentation(s) are often not ready when pivotal trials commence, and it is common to have drug product changes (manufacturing process or presentation) during clinical development. A scientifically sound and robust bridging strategy is required in order to introduce these changes into the clinic safely. There is currently no single developmental paradigm, but a risk-based hierarchical approach has been well accepted. The rigor required of a bridging package depends on the level of risk associated with the changes. Clinical pharmacokinetic/pharmacodynamic comparability or outcome studies are only required when important changes occur at a late stage. Moreover, an injectable DDC needs to be user-centric, and usability assessment in real-world clinical settings may be required to support the approval of a DDC. In this review, we discuss the common issues during the manufacturing process and presentation development of an injectable DDC and practical considerations in establishing a clinical strategy to address these issues, including key elements of clinical studies. We also analyze the current practice in the industry and review relevant and status of regulatory guidance in the DDC field. PMID:29035675

  18. Technical writing practically unified through industry

    NASA Technical Reports Server (NTRS)

    Houston, L. S.

    1981-01-01

    General background details in the development of a university level technical writing program, based upon the writing tasks of the student's occupations, are summarized. Objectives and methods for unifying the courses of study with the needs of industry are discussed. Four academic course divisions, Industries Technologies, in which preparation and training are offered are: Animal, Horticulture, Agriculture, and Agricultural Business. Occupational competence is cited as the main goal for these programs in which technical writing is to be practically unified through industry. Course descriptions are also provided.

  19. Physician Willingness and Resources to Serve More Medicaid Patients: Perspectives from Primary Care Physicians

    PubMed Central

    Sommers, Anna S.; Paradise, Julia; Miller, Carolyn

    2011-01-01

    Objective Sixteen million people will gain Medicaid under health reform. This study compares primary care physicians (PCPs) on reported acceptance of new Medicaid patients and practice characteristics. Data and Methods Sample of 1,460 PCPs in outpatient settings was drawn from a 2008 nationally representative survey of physicians. PCPs were classified into four categories based on distribution of practice revenue from Medicaid and Medicare and acceptance of new Medicaid patients. Fifteen in-depth telephone interviews supplemented analysis. Findings Most high- and moderate-share Medicaid PCPs report accepting “all” or “most” new Medicaid patients. High-share Medicaid PCPs were more likely than others to work in hospital-based practices (20%) and health centers (18%). About 30% of high- and moderate-share Medicaid PCPs worked in practices with a hospital ownership interest. Health IT use was similar between these two groups and high-share Medicare PCPs, but more high- and moderate-share Medicaid PCPs provided interpreters and non-physician staff for patient education. Over 40% of high- and moderate-share Medicaid PCPs reported inadequate patient time as a major problem. Low- and no-share Medicaid PCPs practiced in higher-income areas than high-share Medicaid PCPs. In interviews, difficulty arranging specialist care, reimbursement, and administrative hassles emerged as reasons for limiting Medicaid patients. Policy Implications PCPs already serving Medicaid are positioned to expand capacity but also face constraints. Targeted efforts to increase their capacity could help. Acceptance of new Medicaid patients under health reform will hinge on multiple factors, not payment alone. Trends toward hospital ownership could increase practices' capacity and willingness to serve Medicaid. PMID:22340772

  20. Benchmarking Work Practices and Outcomes in Australian Universities Using an Employee Survey

    ERIC Educational Resources Information Center

    Langford, Peter H.

    2010-01-01

    The purpose of the current study was to benchmark a broad range of work practices and outcomes in Australian universities against other industries. Past research suggests occupational stress experienced by academic staff is worse than experienced by employees in other industries. However, no other practices or outcomes can be compared confidently.…

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top