Science.gov

Sample records for accepts turbine health

  1. Wind turbines and human health.

    PubMed

    Knopper, Loren D; Ollson, Christopher A; McCallum, Lindsay C; Whitfield Aslund, Melissa L; Berger, Robert G; Souweine, Kathleen; McDaniel, Mary

    2014-01-01

    The association between wind turbines and health effects is highly debated. Some argue that reported health effects are related to wind turbine operation [electromagnetic fields (EMF), shadow flicker, audible noise, low-frequency noise, infrasound]. Others suggest that when turbines are sited correctly, effects are more likely attributable to a number of subjective variables that result in an annoyed/stressed state. In this review, we provide a bibliographic-like summary and analysis of the science around this issue specifically in terms of noise (including audible, low-frequency noise, and infrasound), EMF, and shadow flicker. Now there are roughly 60 scientific peer-reviewed articles on this issue. The available scientific evidence suggests that EMF, shadow flicker, low-frequency noise, and infrasound from wind turbines are not likely to affect human health; some studies have found that audible noise from wind turbines can be annoying to some. Annoyance may be associated with some self-reported health effects (e.g., sleep disturbance) especially at sound pressure levels >40 dB(A). Because environmental noise above certain levels is a recognized factor in a number of health issues, siting restrictions have been implemented in many jurisdictions to limit noise exposure. These setbacks should help alleviate annoyance from noise. Subjective variables (attitudes and expectations) are also linked to annoyance and have the potential to facilitate other health complaints via the nocebo effect. Therefore, it is possible that a segment of the population may remain annoyed (or report other health impacts) even when noise limits are enforced. Based on the findings and scientific merit of the available studies, the weight of evidence suggests that when sited properly, wind turbines are not related to adverse health. Stemming from this review, we provide a number of recommended best practices for wind turbine development in the context of human health. PMID:24995266

  2. Wind Turbines and Human Health

    PubMed Central

    Knopper, Loren D.; Ollson, Christopher A.; McCallum, Lindsay C.; Whitfield Aslund, Melissa L.; Berger, Robert G.; Souweine, Kathleen; McDaniel, Mary

    2014-01-01

    The association between wind turbines and health effects is highly debated. Some argue that reported health effects are related to wind turbine operation [electromagnetic fields (EMF), shadow flicker, audible noise, low-frequency noise, infrasound]. Others suggest that when turbines are sited correctly, effects are more likely attributable to a number of subjective variables that result in an annoyed/stressed state. In this review, we provide a bibliographic-like summary and analysis of the science around this issue specifically in terms of noise (including audible, low-frequency noise, and infrasound), EMF, and shadow flicker. Now there are roughly 60 scientific peer-reviewed articles on this issue. The available scientific evidence suggests that EMF, shadow flicker, low-frequency noise, and infrasound from wind turbines are not likely to affect human health; some studies have found that audible noise from wind turbines can be annoying to some. Annoyance may be associated with some self-reported health effects (e.g., sleep disturbance) especially at sound pressure levels >40 dB(A). Because environmental noise above certain levels is a recognized factor in a number of health issues, siting restrictions have been implemented in many jurisdictions to limit noise exposure. These setbacks should help alleviate annoyance from noise. Subjective variables (attitudes and expectations) are also linked to annoyance and have the potential to facilitate other health complaints via the nocebo effect. Therefore, it is possible that a segment of the population may remain annoyed (or report other health impacts) even when noise limits are enforced. Based on the findings and scientific merit of the available studies, the weight of evidence suggests that when sited properly, wind turbines are not related to adverse health. Stemming from this review, we provide a number of recommended best practices for wind turbine development in the context of human health. PMID:24995266

  3. Establishment of noise acceptance criteria for wind turbines

    NASA Technical Reports Server (NTRS)

    Stephens, D. G.; Shepherd, K. P.; Grosveld, F.

    1981-01-01

    A program is being conducted to develop noise criteria for wind turbines which minimize annoyance and which can be used in design specifications for future machines. The approach consists of presenting wind turbine noise stimuli to test subjects in a laboratory listening chamber. The responses of the subjects are recorded for a range of stimuli which encompass the designs, operating conditions, and ambient noise levels of current and future installations. Results to date have established the threshold of detectability for a range of impulsive stimuli of the type associated with blade/tower-wake interactions. The status of the ongoing psychoacoustic tests, the subjective data, and the approach to the development of noise acceptance criteria are described.

  4. Health effects and wind turbines: A review of the literature

    PubMed Central

    2011-01-01

    . Conclusions What both types of studies have in common is the conclusion that wind turbines can be a source of annoyance for some people. The difference between both types is the reason for annoyance. While it is acknowledged that noise from wind turbines can be annoying to some and associated with some reported health effects (e.g., sleep disturbance), especially when found at sound pressure levels greater than 40 db(A), given that annoyance appears to be more strongly related to visual cues and attitude than to noise itself, self reported health effects of people living near wind turbines are more likely attributed to physical manifestation from an annoyed state than from wind turbines themselves. In other words, it appears that it is the change in the environment that is associated with reported health effects and not a turbine-specific variable like audible noise or infrasound. Regardless of its cause, a certain level of annoyance in a population can be expected (as with any number of projects that change the local environment) and the acceptable level is a policy decision to be made by elected officials and their government representatives where the benefits of wind power are weighted against their cons. Assessing the effects of wind turbines on human health is an emerging field and conducting further research into the effects of wind turbines (and environmental changes) on human health, emotional and physical, is warranted. PMID:21914211

  5. Acceptance of Swedish e-health services

    PubMed Central

    Jung, Mary-Louise; Loria, Karla

    2010-01-01

    Objective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health. Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM), in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted. Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use. Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide. PMID:21289860

  6. Structural health monitoring of wind turbine blades

    NASA Astrophysics Data System (ADS)

    Rumsey, Mark A.; Paquette, Joshua A.

    2008-03-01

    As electric utility wind turbines increase in size, and correspondingly, increase in initial capital investment cost, there is an increasing need to monitor the health of the structure. Acquiring an early indication of structural or mechanical problems allows operators to better plan for maintenance, possibly operate the machine in a de-rated condition rather than taking the unit off-line, or in the case of an emergency, shut the machine down to avoid further damage. This paper describes several promising structural health monitoring (SHM) techniques that were recently exercised during a fatigue test of a 9 meter glass-epoxy and carbon-epoxy wind turbine blade. The SHM systems were implemented by teams from NASA Kennedy Space Center, Purdue University and Virginia Tech. A commercial off-the-shelf acoustic emission (AE) NDT system gathered blade AE data throughout the test. At a fatigue load cycle rate around 1.2 Hertz, and after more than 4,000,000 fatigue cycles, the blade was diagnostically and visibly failing at the out-board blade spar-cap termination point at 4.5 meters. For safety reasons, the test was stopped just before the blade completely failed. This paper provides an overview of the SHM and NDT system setups and some current test results.

  7. Acceptance of health information technology in health professionals: an application of the revised technology acceptance model.

    PubMed

    Ketikidis, Panayiotis; Dimitrovski, Tomislav; Lazuras, Lambros; Bath, Peter A

    2012-06-01

    The response of health professionals to the use of health information technology (HIT) is an important research topic that can partly explain the success or failure of any HIT application. The present study applied a modified version of the revised technology acceptance model (TAM) to assess the relevant beliefs and acceptance of HIT systems in a sample of health professionals (n = 133). Structured anonymous questionnaires were used and a cross-sectional design was employed. The main outcome measure was the intention to use HIT systems. ANOVA was employed to examine differences in TAM-related variables between nurses and medical doctors, and no significant differences were found. Multiple linear regression analysis was used to assess the predictors of HIT usage intentions. The findings showed that perceived ease of use, but not usefulness, relevance and subjective norms directly predicted HIT usage intentions. The present findings suggest that a modification of the original TAM approach is needed to better understand health professionals' support and endorsement of HIT. Perceived ease of use, relevance of HIT to the medical and nursing professions, as well as social influences, should be tapped by information campaigns aiming to enhance support for HIT in healthcare settings. PMID:22733680

  8. Structural health monitoring of wind turbines

    SciTech Connect

    Simmermacher, T.; James, G.H. III.; Hurtado, J.E.

    1997-09-01

    To properly determine what is needed in a structural health monitoring system, actual operational structures need to be studied. We have found that to effectively monitor the structural condition of an operational structure four areas must be addressed: determination of damage-sensitive parameters, test planning, information condensation, and damage identification techniques. In this work, each of the four areas has been exercised on an operational structure. The structures studied were all be wind turbines of various designs. The experiments are described and lessons learned will be presented. The results of these studies include a broadening of experience in the problems of monitoring actual structures as well as developing a process for implementing such monitoring systems.

  9. Workaholism, Health, and Self-Acceptance

    ERIC Educational Resources Information Center

    Chamberlin, Christine M.; Zhang, Naijian

    2009-01-01

    This study examined the relationships between workaholism, perceived parental workaholism, self-acceptance, psychological well-being, and physical symptoms among 347 college students. Statistically significant relationships were found between college students' perceived parental workaholism and their own workaholism. Also, relationships between…

  10. The J-2X Fuel Turbopump - Turbine Nozzle Low Cycle Fatigue Acceptance Rationale

    NASA Technical Reports Server (NTRS)

    Hawkins, Lakiesha V.; Duke, Gregory C.; Newman, Wesley R.; Reynolds, David C.

    2011-01-01

    The J-2X Fuel Turbopump (FTP) turbine, which drives the pump that feeds hydrogen to the J-2X engine for main combustion, is based on the J-2S design developed in the early 1970 s. Updated materials and manufacturing processes have been incorporated to meet current requirements. This paper addresses an analytical concern that the J-2X Fuel Turbine Nozzle Low Cycle Fatigue (LCF) analysis did not meet safety factor requirements per program structural assessment criteria. High strains in the nozzle airfoil during engine transients were predicted to be caused by thermally induced stresses between the vane hub, vane shroud, and airfoil. The heritage J-2 nozzle was of a similar design and experienced cracks in the same area where analysis predicted cracks in the J-2X design. Redesign options that did not significantly impact the overall turbine configuration were unsuccessful. An approach using component tests and displacement controlled fracture mechanics analysis to evaluate LCF crack initiation and growth rate was developed. The results of this testing and analysis were used to define the level of inspection on development engine test units. The programmatic impact of developing crack initiation/growth rate/arrest data was significant for the J-2X program. Final Design Certification Review acceptance logic will ultimately be developed utilizing this test and analytical data.

  11. Use and Acceptance of Social Media among Health Educators

    ERIC Educational Resources Information Center

    Hanson, Carl; West, Joshua; Neiger, Brad; Thackeray, Rosemary; Barnes, Michael; McIntyre, Emily

    2011-01-01

    Background: As social media use grows in popularity, health educators are challenged to think differently about how to communicate with audiences. Purpose: The purpose of this study was to explore social media use and factors that determine acceptance of social media use among health educators. Methods: A random sample of Certified Health…

  12. Occupational Health and Industrial Wind Turbines: A Case Study

    ERIC Educational Resources Information Center

    Rand, Robert W.; Ambrose, Stephen E.; Krogh, Carmen M. E.

    2011-01-01

    Industrial wind turbines (IWTs) are being installed at a fast pace globally. Researchers, medical practitioners, and media have reported adverse health effects resulting from living in the environs of IWTs. While there have been some anecdotal reports from technicians and other workers who work in the environs of IWTs, little is known about the…

  13. Literature Reviews on Wind Turbines and Health: Are They Enough?

    ERIC Educational Resources Information Center

    Horner, Brett; Jeffery, Roy D.; Krogh, Carmen M. E.

    2011-01-01

    Industrial wind turbines (IWTs) are a new source of community noise to which relatively few people have yet been exposed. IWTs are being erected at a rapid pace in proximity to human habitation. Some people report experiencing adverse health effects as a result of living in the environs of IWTs. In order to address public concerns and assess the…

  14. Peer Acceptance in the School Class and Subjective Health Complaints: A Multilevel Approach

    ERIC Educational Resources Information Center

    Almquist, Ylva B.; Modin, Bitte; Augustine, Lilly

    2013-01-01

    Background: Feeling accepted by peers is important for young people's health but few studies have examined the overall degree of acceptance in school and its health consequences. The purpose of the study was to investigate whether health complaints among Swedish students can be attributed to the acceptance climate in their school class even…

  15. Health Effects Related to Wind Turbine Noise Exposure: A Systematic Review

    PubMed Central

    Schmidt, Jesper Hvass; Klokker, Mads

    2014-01-01

    Background Wind turbine noise exposure and suspected health-related effects thereof have attracted substantial attention. Various symptoms such as sleep-related problems, headache, tinnitus and vertigo have been described by subjects suspected of having been exposed to wind turbine noise. Objective This review was conducted systematically with the purpose of identifying any reported associations between wind turbine noise exposure and suspected health-related effects. Data Sources A search of the scientific literature concerning the health-related effects of wind turbine noise was conducted on PubMed, Web of Science, Google Scholar and various other Internet sources. Study Eligibility Criteria All studies investigating suspected health-related outcomes associated with wind turbine noise exposure were included. Results Wind turbines emit noise, including low-frequency noise, which decreases incrementally with increases in distance from the wind turbines. Likewise, evidence of a dose-response relationship between wind turbine noise linked to noise annoyance, sleep disturbance and possibly even psychological distress was present in the literature. Currently, there is no further existing statistically-significant evidence indicating any association between wind turbine noise exposure and tinnitus, hearing loss, vertigo or headache. Limitations Selection bias and information bias of differing magnitudes were found to be present in all current studies investigating wind turbine noise exposure and adverse health effects. Only articles published in English, German or Scandinavian languages were reviewed. Conclusions Exposure to wind turbines does seem to increase the risk of annoyance and self-reported sleep disturbance in a dose-response relationship. There appears, though, to be a tolerable level of around LAeq of 35 dB. Of the many other claimed health effects of wind turbine noise exposure reported in the literature, however, no conclusive evidence could be found

  16. Acceptability and Trust of Community Health Workers Offering Maternal and Newborn Health Education in Rural Uganda

    ERIC Educational Resources Information Center

    Singh, Debra; Cumming, Robert; Negin, Joel

    2015-01-01

    When trusted, Community Health Workers (CHWs) can contribute to improving maternal and newborn health outcomes in low- and middle-income countries through education. Issues of acceptability of CHWs by communities were explored through experiences gained in a qualitative study that is part of a cluster randomized trial in East Uganda. Initially,…

  17. Integrating Systems Health Management with Adaptive Controls for a Utility-Scale Wind Turbine

    NASA Technical Reports Server (NTRS)

    Frost, Susan A.; Goebel, Kai; Trinh, Khanh V.; Balas, Mark J.; Frost, Alan M.

    2011-01-01

    Increasing turbine up-time and reducing maintenance costs are key technology drivers for wind turbine operators. Components within wind turbines are subject to considerable stresses due to unpredictable environmental conditions resulting from rapidly changing local dynamics. Systems health management has the aim to assess the state-of-health of components within a wind turbine, to estimate remaining life, and to aid in autonomous decision-making to minimize damage. Advanced adaptive controls can provide the mechanism to enable optimized operations that also provide the enabling technology for Systems Health Management goals. The work reported herein explores the integration of condition monitoring of wind turbine blades with contingency management and adaptive controls. Results are demonstrated using a high fidelity simulator of a utility-scale wind turbine.

  18. Development of a Health Information Technology Acceptance Model Using Consumers’ Health Behavior Intention

    PubMed Central

    2012-01-01

    Background For effective health promotion using health information technology (HIT), it is mandatory that health consumers have the behavioral intention to measure, store, and manage their own health data. Understanding health consumers’ intention and behavior is needed to develop and implement effective and efficient strategies. Objective To develop and verify the extended Technology Acceptance Model (TAM) in health care by describing health consumers’ behavioral intention of using HIT. Methods This study used a cross-sectional descriptive correlational design. We extended TAM by adding more antecedents and mediating variables to enhance the model’s explanatory power and to make it more applicable to health consumers’ behavioral intention. Additional antecedents and mediating variables were added to the hypothetical model, based on their theoretical relevance, from the Health Belief Model and theory of planned behavior, along with the TAM. We undertook structural equation analysis to examine the specific nature of the relationship involved in understanding consumers’ use of HIT. Study participants were 728 members recruited from three Internet health portals in Korea. Data were collected by a Web-based survey using a structured self-administered questionnaire. Results The overall fitness indices for the model developed in this study indicated an acceptable fit of the model. All path coefficients were statistically significant. This study showed that perceived threat, perceived usefulness, and perceived ease of use significantly affected health consumers’ attitude and behavioral intention. Health consumers’ health status, health belief and concerns, subjective norm, HIT characteristics, and HIT self-efficacy had a strong indirect impact on attitude and behavioral intention through the mediators of perceived threat, perceived usefulness, and perceived ease of use. Conclusions An extended TAM in the HIT arena was found to be valid to describe health

  19. Integrating Health Belief Model and Technology Acceptance Model: An Investigation of Health-Related Internet Use

    PubMed Central

    2015-01-01

    Background Today, people use the Internet to satisfy health-related information and communication needs. In Malaysia, Internet use for health management has become increasingly significant due to the increase in the incidence of chronic diseases, in particular among urban women and their desire to stay healthy. Past studies adopted the Technology Acceptance Model (TAM) and Health Belief Model (HBM) independently to explain Internet use for health-related purposes. Although both the TAM and HBM have their own merits, independently they lack the ability to explain the cognition and the related mechanism in which individuals use the Internet for health purposes. Objective This study aimed to examine the influence of perceived health risk and health consciousness on health-related Internet use based on the HBM. Drawing on the TAM, it also tested the mediating effects of perceived usefulness of the Internet for health information and attitude toward Internet use for health purposes for the relationship between health-related factors, namely perceived health risk and health consciousness on health-related Internet use. Methods Data obtained for the current study were collected using purposive sampling; the sample consisted of women in Malaysia who had Internet access. The partial least squares structural equation modeling method was used to test the research hypotheses developed. Results Perceived health risk (β=.135, t 1999=2.676) and health consciousness (β=.447, t 1999=9.168) had a positive influence on health-related Internet use. Moreover, perceived usefulness of the Internet and attitude toward Internet use for health-related purposes partially mediated the influence of health consciousness on health-related Internet use (β=.025, t 1999=3.234), whereas the effect of perceived health risk on health-related Internet use was fully mediated by perceived usefulness of the Internet and attitude (β=.029, t 1999=3.609). These results suggest the central role of

  20. Public Health Ethics, Legitimacy, and the Challenges of Industrial Wind Turbines: The Case of Ontario, Canada

    ERIC Educational Resources Information Center

    Shain, Martin

    2011-01-01

    While industrial wind turbines (IWTs) clearly raise issues concerning threats to the health of a few in contrast to claimed health benefits to many, the trade-off has not been fully considered in a public health framework. This article reviews public health ethics justifications for the licensing and installation of IWTs. It concludes that the…

  1. Acceptance of selective contracting: the role of trust in the health insurer

    PubMed Central

    2013-01-01

    Background In a demand oriented health care system based on managed competition, health insurers have incentives to become prudent buyers of care on behalf of their enrolees. They are allowed to selectively contract care providers. This is supposed to stimulate competition between care providers and both increase the quality of care and contain costs in the health care system. However, health insurers are reluctant to implement selective contracting; they believe their enrolees will not accept this. One reason, insurers believe, is that enrolees do not trust their health insurer. However, this has never been studied. This paper aims to study the role played by enrolees’ trust in the health insurer on their acceptance of selective contracting. Methods An online survey was conducted among 4,422 people insured through a large Dutch health insurance company. Trust in the health insurer, trust in the purchasing strategy of the health insurer and acceptance of selective contracting were measured using multiple item scales. A regression model was constructed to analyse the results. Results Trust in the health insurer turned out to be an important prerequisite for the acceptance of selective contracting among their enrolees. The association of trust in the purchasing strategy of the health insurer with acceptance of selective contracting is stronger for older people than younger people. Furthermore, it was found that men and healthier people accepted selective contracting by their health insurer more readily. This was also true for younger people with a low level of trust in their health insurer. Conclusion This study provides insight into factors that influence people’s acceptance of selective contracting by their health insurer. This may help health insurers to implement selective contracting in a way their enrolees will accept and, thus, help systems of managed competition to develop. PMID:24083663

  2. Testing the Electronic Personal Health Record Acceptance Model by Nurses for Managing Their Own Health

    PubMed Central

    Trinkoff, A.M.; Storr, C.L.; Wilson, M.L.; Gurses, A.P.

    2015-01-01

    Summary Background To our knowledge, no evidence is available on health care professionals’ use of electronic personal health records (ePHRs) for their health management. We therefore focused on nurses’ personal use of ePHRs using a modified technology acceptance model. Objectives To examine (1) the psychometric properties of the ePHR acceptance model, (2) the associations of perceived usefulness, ease of use, data privacy and security protection, and perception of self as health-promoting role models to nurses’ own ePHR use, and (3) the moderating influences of age, chronic illness and medication use, and providers’ use of electronic health record (EHRs) on the associations between the ePHR acceptance constructs and ePHR use. Methods A convenience sample of registered nurses, those working in one of 12 hospitals in the Maryland and Washington, DC areas and members of the nursing informatics community (AMIA and HIMSS), were invited to respond to an anonymous online survey; 847 responded. Multiple logistic regression identified associations between the model constructs and ePHR use, and the moderating effect. Results Overall, ePHRs were used by 47%. Sufficient reliability for all scales was found. Three constructs were significantly related to nurses’ own ePHR use after adjusting for covariates: usefulness, data privacy and security protection, and health-promoting role model. Nurses with providers that used EHRs who perceived a higher level of data privacy and security protection had greater odds of ePHR use than those whose providers did not use EHRs. Older nurses with a higher self-perception as health-promoting role models had greater odds of ePHR use than younger nurses. Conclusions Nurses who use ePHRs for their personal health might promote adoption by the general public by serving as health-promoting role models. They can contribute to improvements in patient education and ePHR design, and serve as crucial resources when working with their

  3. Examining Acceptance of an Integrated Personal Health Record (PHR)

    ERIC Educational Resources Information Center

    Morton, Alicia A.

    2011-01-01

    Objective: The purpose of this project was to examine the practice question, "What are the factors influencing acceptance of integrated PHRs for self-care management among the Howard University Hospital (HUH) Diabetes Treatment Clinic (DTC) patients?" These factors include a) demographic characteristics, b) computer access/use/experience,…

  4. The role of acceptance and job control in mental health, job satisfaction, and work performance.

    PubMed

    Bond, Frank W; Bunce, David

    2003-12-01

    Acceptance, the willingness to experience thoughts, feelings, and physiological sensations without having to control them or let them determine one's actions, is a major individual determinant of mental health and behavioral effectiveness in a more recent theory of psychopathology. This 2-wave panel study examined the ability of acceptance also to explain mental health, job satisfaction, and performance in the work domain. The authors hypothesized that acceptance would predict these 3 outcomes 1 year later in a sample of customer service center workers in the United Kingdom (N = 412). Results indicated that acceptance predicted mental health and an objective measure of performance over and above job control, negative affectivity, and locus of control. These beneficial effects of having more job control were enhanced when people had higher levels of acceptance. The authors discuss the theoretical and practical relevance of this individual characteristic to occupational health and performance. PMID:14640816

  5. Electronic Health Record Patient Portal Adoption by Health Care Consumers: An Acceptance Model and Survey

    PubMed Central

    2016-01-01

    Background The future of health care delivery is becoming more citizen centered, as today’s user is more active, better informed, and more demanding. Worldwide governments are promoting online health services, such as electronic health record (EHR) patient portals and, as a result, the deployment and use of these services. Overall, this makes the adoption of patient-accessible EHR portals an important field to study and understand. Objective The aim of this study is to understand the factors that drive individuals to adopt EHR portals. Methods We applied a new adoption model using, as a starting point, Ventkatesh's Unified Theory of Acceptance and Use of Technology in a consumer context (UTAUT2) by integrating a new construct specific to health care, a new moderator, and new relationships. To test the research model, we used the partial least squares (PLS) causal modelling approach. An online questionnaire was administrated. We collected 360 valid responses. Results The statistically significant drivers of behavioral intention are performance expectancy (beta=.200; t=3.619), effort expectancy (beta=.185; t=2.907), habit (beta=.388; t=7.320), and self-perception (beta=.098; t=2.285). The predictors of use behavior are habit (beta=0.206; t=2.752) and behavioral intention (beta=0.258; t=4.036). The model explained 49.7% of the variance in behavioral intention and 26.8% of the variance in use behavior. Conclusions Our research helps to understand the desired technology characteristics of EHR portals. By testing an information technology acceptance model, we are able to determine what is more valued by patients when it comes to deciding whether to adopt EHR portals or not. The inclusion of specific constructs and relationships related to the health care consumer area also had a significant impact on understanding the adoption of EHR portals. PMID:26935646

  6. Acceptability of mobile health interventions to reduce inactivity-related health risk in central Pennsylvania adults

    PubMed Central

    Yang, Chih-Hsiang; Maher, Jaclyn P.; Conroy, David E.

    2015-01-01

    Insufficient physical activity and excessive sedentary behavior elevate health risk. Mobile applications (apps) provide one mode for delivering interventions to modify these behaviors and reduce health risk. The purpose of this study was to characterize the need for and acceptability of health behavior interventions among rural adults and evaluate the interest in and the value of app-based interventions in this population. Central Pennsylvania adults with smartphones (N = 258) completed a brief web survey in October–November 2012. Most adults report one or both inactivity-related behavioral risk factors, would use a free app to modify those risk behaviors, and would pay a small amount for that app. Low-cost, efficacious apps to increase physical activity or reduce sedentary behavior should be promoted in public health practice. User experience should be at the forefront of this process to increase value and minimize burden in the service of long-term engagement, behavior change, and health risk reduction. PMID:26844135

  7. Acceptability of mobile health interventions to reduce inactivity-related health risk in central Pennsylvania adults.

    PubMed

    Yang, Chih-Hsiang; Maher, Jaclyn P; Conroy, David E

    2015-01-01

    Insufficient physical activity and excessive sedentary behavior elevate health risk. Mobile applications (apps) provide one mode for delivering interventions to modify these behaviors and reduce health risk. The purpose of this study was to characterize the need for and acceptability of health behavior interventions among rural adults and evaluate the interest in and the value of app-based interventions in this population. Central Pennsylvania adults with smartphones (N = 258) completed a brief web survey in October-November 2012. Most adults report one or both inactivity-related behavioral risk factors, would use a free app to modify those risk behaviors, and would pay a small amount for that app. Low-cost, efficacious apps to increase physical activity or reduce sedentary behavior should be promoted in public health practice. User experience should be at the forefront of this process to increase value and minimize burden in the service of long-term engagement, behavior change, and health risk reduction. PMID:26844135

  8. THE TECHNOLOGY ACCEPTANCE MODEL: ITS PAST AND ITS FUTURE IN HEALTH CARE

    PubMed Central

    HOLDEN, RICHARD J.; KARSH, BEN-TZION

    2009-01-01

    Increasing interest in end users’ reactions to health information technology (IT) has elevated the importance of theories that predict and explain health IT acceptance and use. This paper reviews the application of one such theory, the Technology Acceptance Model (TAM), to health care. We reviewed 16 data sets analyzed in over 20 studies of clinicians using health IT for patient care. Studies differed greatly in samples and settings, health ITs studied, research models, relationships tested, and construct operationalization. Certain TAM relationships were consistently found to be significant, whereas others were inconsistent. Several key relationships were infrequently assessed. Findings show that TAM predicts a substantial portion of the use or acceptance of health IT, but that the theory may benefit from several additions and modifications. Aside from improved study quality, standardization, and theoretically motivated additions to the model, an important future direction for TAM is to adapt the model specifically to the health care context, using beliefs elicitation methods. PMID:19615467

  9. Health Practices and Vaginal Microbicide Acceptability among Urban Black Women

    PubMed Central

    Wade, Christine; Chao, Maria T.; Kronenberg, Fredi; Cushman, Linda F.

    2008-01-01

    Abstract Background Intravaginal topical microbicides are being investigated for prevention of HIV transmission. Use of vaginal microbicides will constitute a new type of practice, occurring in the context of other vaginal practices related to contraception, hygiene, and self-care, which are affected by cultural norms and personal beliefs. Given the high rate of HIV infection among black women, research on practices and decision making relevant to microbicide acceptability is needed in this population. Methods Twenty-three black women in New York City, aged 25–64, completed in-person semistructured interviews and self-administered questionnaires. Quantitative analyses examined vaginal practices and willingness to use microbicides. Qualitative analyses explored underlying decision-making processes involved in choices regarding vaginal practices and general healthcare. Results Willingness to use vaginal products for HIV prevention was high, especially among more educated women. Safety was a major concern, and women were cautious about using vaginal products. Whereas some viewed synthetic products as having potentially harmful side effects, others perceived natural products as risky because of insufficient testing. Choices about vaginal practices were affected by assessments of risk and efficacy, prior experience, cultural background, and general approach to healthcare. Conclusions The majority of women in the sample expressed willingness to use a vaginal product for HIV prevention. Decision-making processes regarding vaginal practices were complex and were affected by social, cultural, and personal factors. Although specific preferences may vary, attitudes toward using a vaginal product are likely to be positive when side effects are minimal and the product is considered safe. PMID:18788991

  10. Acceptability of Delivering and Accessing Health Information Through Text Messaging Among Community Health Advisors

    PubMed Central

    Phillips, Janice; Mohiuddin, Mohammed Omar; McNees, Patrick; Scarinci, Isabel

    2013-01-01

    Background Communication technologies can play a significant role in decreasing communication inequalities and cancer disparities by promoting cancer control and enhancing population and individual health. Studies have shown that technology, such as the mobile phone short message service (SMS) or text messaging, can be an effective health communication strategy that influences individuals’ health-related decisions, behaviors, and outcomes. Objective The purpose of this study was to explore usage of communication technologies, assess the acceptability of mobile technology for delivery and access of health information, and identify cancer and health information needs among Deep South Network for Cancer Control trained Community Health Advisors as Research Partners (CHARPs). Methods A mixed-method design was used, and a triangulation protocol was followed to combine quantitative and qualitative data. Focus groups (4 focus groups; n=37) and self-administered surveys (n=77) were conducted to determine CHARPs mobile phone and text message usage. The objective was to include identification of barriers and facilitators to a mobile phone intervention. Results All participants were African American (37/37, 100%), 11/37 (89%) were women, and the mean age was 53.4 (SD 13.9; focus groups) and 59.9 (SD 8.7; survey). Nearly all (33/37, 89%) of focus group participants reported owning a mobile phone. Of those, 8/33 (24%) owned a smartphone, 22/33 (67%) had a text messaging plan, and 18/33 (55%) and 11/33 (33%) received and sent text messages several times a week or day, respectively. Similar responses were seen among the survey participants, with 75/77 (97%) reporting owning a mobile phone, and of those, 22/75 (30%) owned a smartphone, 39/75 (53%) had a text messaging plan, and 37/75 (50%) received and 27/75 (37%) sent text messages several times a week or day. The benefits of a text messaging system mentioned by focus group participants included alternative form of

  11. Prognostics and Health Management of Wind Turbines: Current Status and Future Opportunities

    SciTech Connect

    Sheng, Shuangwen

    2015-12-14

    Prognostics and health management is not a new concept. It has been used in relatively mature industries, such as aviation and electronics, to help improve operation and maintenance (O&M) practices. In the wind industry, prognostics and health management is relatively new. The level for both wind industry applications and research and development (R&D) has increased in recent years because of its potential for reducing O&M cost of wind power, especially for turbines installed offshore. The majority of wind industry application efforts has been focused on diagnosis based on various sensing and feature extraction techniques. For R&D, activities are being conducted in almost all areas of a typical prognostics and health management framework (i.e., sensing, data collection, feature extraction, diagnosis, prognosis, and maintenance scheduling). This presentation provides an overview of the current status of wind turbine prognostics and health management that focuses on drivetrain condition monitoring through vibration, oil debris, and oil condition analysis techniques. It also discusses turbine component health diagnosis through data mining and modeling based on supervisory control and data acquisition system data. Finally, it provides a brief survey of R&D activities for wind turbine prognostics and health management, along with future opportunities.

  12. Structural health and prognostics management for the enhancement of offshore wind turbine operations and maintenance strategies

    DOE PAGESBeta

    Griffith, D. Todd; Yoder, Nathanael C.; Resor, Brian; White, Jonathan; Paquette, Joshua

    2013-09-19

    Offshore wind turbines are an attractive source for clean and renewable energy for reasons including their proximity to population centers and higher capacity factors. One obstacle to the more widespread installation of offshore wind turbines in the USA, however, is that recent projections of offshore operations and maintenance costs vary from two to five times the land-based costs. One way in which these costs could be reduced is through use of a structural health and prognostics management (SHPM) system as part of a condition-based maintenance paradigm with smart loads management. Our paper contributes to the development of such strategies bymore » developing an initial roadmap for SHPM, with application to the blades. One of the key elements of the approach is a multiscale simulation approach developed to identify how the underlying physics of the system are affected by the presence of damage and how these changes manifest themselves in the operational response of a full turbine. A case study of a trailing edge disbond is analysed to demonstrate the multiscale sensitivity of damage approach and to show the potential life extension and increased energy capture that can be achieved using simple changes in the overall turbine control and loads management strategy. Finally, the integration of health monitoring information, economic considerations such as repair costs versus state of health, and a smart loads management methodology provides an initial roadmap for reducing operations and maintenance costs for offshore wind farms while increasing turbine availability and overall profit.« less

  13. Structural health monitoring on turbine engines using microwave blade tip clearance sensors

    NASA Astrophysics Data System (ADS)

    Woike, Mark; Abdul-Aziz, Ali; Clem, Michelle

    2014-04-01

    The ability to monitor the structural health of the rotating components, especially in the hot sections of turbine engines, is of major interest to the aero community in improving engine safety and reliability. The use of instrumentation for these applications remains very challenging. It requires sensors and techniques that are highly accurate, are able to operate in a high temperature environment, and can detect minute changes and hidden flaws before catastrophic events occur. The National Aeronautics and Space Administration (NASA) has taken a lead role in the investigation of new sensor technologies and techniques for the in situ structural health monitoring of gas turbine engines. As part of this effort, microwave sensor technology has been investigated as a means of making high temperature non-contact blade tip clearance, blade tip timing, and blade vibration measurements for use in gas turbine engines. This paper presents a summary of key results and findings obtained from the evaluation of two different types of microwave sensors that have been investigated for possible use in structural health monitoring applications. The first is a microwave blade tip clearance sensor that has been evaluated on a large scale Axial Vane Fan, a subscale Turbofan, and more recently on sub-scale turbine engine like disks. The second is a novel microwave based blade vibration sensor that was also used in parallel with the microwave blade tip clearance sensors on the same experiments with the sub-scale turbine engine disks.

  14. Structural Health Monitoring on Turbine Engines Using Microwave Blade Tip Clearance Sensors

    NASA Technical Reports Server (NTRS)

    Woike, Mark; Abdul-Aziz, Ali; Clem, Michelle

    2014-01-01

    The ability to monitor the structural health of the rotating components, especially in the hot sections of turbine engines, is of major interest to aero community in improving engine safety and reliability. The use of instrumentation for these applications remains very challenging. It requires sensors and techniques that are highly accurate, are able to operate in a high temperature environment, and can detect minute changes and hidden flaws before catastrophic events occur. The National Aeronautics and Space Administration (NASA) has taken a lead role in the investigation of new sensor technologies and techniques for the in situ structural health monitoring of gas turbine engines. As part of this effort, microwave sensor technology has been investigated as a means of making high temperature non-contact blade tip clearance, blade tip timing, and blade vibration measurements for use in gas turbine engines. This paper presents a summary of key results and findings obtained from the evaluation of two different types of microwave sensors that have been investigated for use possible in structural health monitoring applications. The first is a microwave blade tip clearance sensor that has been evaluated on a large scale Axial Vane Fan, a subscale Turbofan, and more recently on sub-scale turbine engine like disks. The second is a novel microwave based blade vibration sensor that was also used in parallel with the microwave blade tip clearance sensors on the experiments with the sub-scale turbine engine disks.

  15. Structural health and prognostics management for the enhancement of offshore wind turbine operations and maintenance strategies

    SciTech Connect

    Griffith, D. Todd; Yoder, Nathanael C.; Resor, Brian; White, Jonathan; Paquette, Joshua

    2013-09-19

    Offshore wind turbines are an attractive source for clean and renewable energy for reasons including their proximity to population centers and higher capacity factors. One obstacle to the more widespread installation of offshore wind turbines in the USA, however, is that recent projections of offshore operations and maintenance costs vary from two to five times the land-based costs. One way in which these costs could be reduced is through use of a structural health and prognostics management (SHPM) system as part of a condition-based maintenance paradigm with smart loads management. Our paper contributes to the development of such strategies by developing an initial roadmap for SHPM, with application to the blades. One of the key elements of the approach is a multiscale simulation approach developed to identify how the underlying physics of the system are affected by the presence of damage and how these changes manifest themselves in the operational response of a full turbine. A case study of a trailing edge disbond is analysed to demonstrate the multiscale sensitivity of damage approach and to show the potential life extension and increased energy capture that can be achieved using simple changes in the overall turbine control and loads management strategy. Finally, the integration of health monitoring information, economic considerations such as repair costs versus state of health, and a smart loads management methodology provides an initial roadmap for reducing operations and maintenance costs for offshore wind farms while increasing turbine availability and overall profit.

  16. A Systematic Review of Patient Acceptance of Consumer Health Information Technology

    PubMed Central

    Or, Calvin K.L.; Karsh, Ben-Tzion

    2009-01-01

    A systematic literature review was performed to identify variables promoting consumer health information technology (CHIT) acceptance among patients. The electronic bibliographic databases Web of Science, Business Source Elite, CINAHL, Communication and Mass Media Complete, MEDLINE, PsycArticles, and PsycInfo were searched. A cited reference search of articles meeting the inclusion criteria was also conducted to reduce misses. Fifty-two articles met the selection criteria. Among them, 94 different variables were tested for associations with acceptance. Most of those tested (71%) were patient factors, including sociodemographic characteristics, health- and treatment-related variables, and prior experience or exposure to computer/health technology. Only ten variables were related to human-technology interaction; 16 were organizational factors; and one was related to the environment. In total, 62 (66%) were found to predict acceptance in at least one study. Existing literature focused largely on patient-related factors. No studies examined the impact of social and task factors on acceptance, and few tested the effects of organizational or environmental factors on acceptance. Future research guided by technology acceptance theories should fill those gaps to improve our understanding of patient CHIT acceptance, which in turn could lead to better CHIT design and implementation. PMID:19390112

  17. A systematic review of patient acceptance of consumer health information technology.

    PubMed

    Or, Calvin K L; Karsh, Ben-Tzion

    2009-01-01

    A systematic literature review was performed to identify variables promoting consumer health information technology (CHIT) acceptance among patients. The electronic bibliographic databases Web of Science, Business Source Elite, CINAHL, Communication and Mass Media Complete, MEDLINE, PsycArticles, and PsycInfo were searched. A cited reference search of articles meeting the inclusion criteria was also conducted to reduce misses. Fifty-two articles met the selection criteria. Among them, 94 different variables were tested for associations with acceptance. Most of those tested (71%) were patient factors, including sociodemographic characteristics, health- and treatment-related variables, and prior experience or exposure to computer/health technology. Only ten variables were related to human-technology interaction; 16 were organizational factors; and one was related to the environment. In total, 62 (66%) were found to predict acceptance in at least one study. Existing literature focused largely on patient-related factors. No studies examined the impact of social and task factors on acceptance, and few tested the effects of organizational or environmental factors on acceptance. Future research guided by technology acceptance theories should fill those gaps to improve our understanding of patient CHIT acceptance, which in turn could lead to better CHIT design and implementation. PMID:19390112

  18. The Link between Health Complaints and Wind Turbines: Support for the Nocebo Expectations Hypothesis

    PubMed Central

    Crichton, Fiona; Chapman, Simon; Cundy, Tim; Petrie, Keith J.

    2014-01-01

    The worldwide expansion of wind energy has met with opposition based on concerns that the infrasound generated by wind turbines causes health problems in nearby residents. In this paper, we argue that health complaints are more likely to be explained by the nocebo response, whereby adverse effects are generated by negative expectations. When individuals expect a feature of their environment or medical treatment to produce illness or symptoms, then this may start a process where the individual looks for symptoms or signs of illness to confirm these negative expectations. As physical symptoms are common in healthy people, there is considerable scope for people to match symptoms with their negative expectations. To support this hypothesis, we draw an evidence from experimental studies that show that, during exposure to wind farm sound, expectations about infrasound can influence symptoms and mood in both positive and negative directions, depending on how expectations are framed. We also consider epidemiological work showing that health complaints have primarily been located in areas that have received the most negative publicity about the harmful effects of turbines. The social aspect of symptom complaints in a community is also discussed as an important process in increasing symptom reports. Media stories, publicity, or social discourse about the reported health effects of wind turbines are likely to trigger reports of similar symptoms, regardless of exposure. Finally, we present evidence to show that the same pattern of health complaints following negative information about wind turbines has also been found in other types of environmental concerns and scares. PMID:25426482

  19. Exposure to wind turbine noise: Perceptual responses and reported health effects.

    PubMed

    Michaud, David S; Feder, Katya; Keith, Stephen E; Voicescu, Sonia A; Marro, Leonora; Than, John; Guay, Mireille; Denning, Allison; McGuire, D'Arcy; Bower, Tara; Lavigne, Eric; Murray, Brian J; Weiss, Shelly K; van den Berg, Frits

    2016-03-01

    Health Canada, in collaboration with Statistics Canada, and other external experts, conducted the Community Noise and Health Study to better understand the impacts of wind turbine noise (WTN) on health and well-being. A cross-sectional epidemiological study was carried out between May and September 2013 in southwestern Ontario and Prince Edward Island on 1238 randomly selected participants (606 males, 632 females) aged 18-79 years, living between 0.25 and 11.22 km from operational wind turbines. Calculated outdoor WTN levels at the dwelling reached 46 dBA. Response rate was 78.9% and did not significantly differ across sample strata. Self-reported health effects (e.g., migraines, tinnitus, dizziness, etc.), sleep disturbance, sleep disorders, quality of life, and perceived stress were not related to WTN levels. Visual and auditory perception of wind turbines as reported by respondents increased significantly with increasing WTN levels as did high annoyance toward several wind turbine features, including the following: noise, blinking lights, shadow flicker, visual impacts, and vibrations. Concern for physical safety and closing bedroom windows to reduce WTN during sleep also increased with increasing WTN levels. Other sample characteristics are discussed in relation to WTN levels. Beyond annoyance, results do not support an association between exposure to WTN up to 46 dBA and the evaluated health-related endpoints. PMID:27036283

  20. The Link between Health Complaints and Wind Turbines: Support for the Nocebo Expectations Hypothesis.

    PubMed

    Crichton, Fiona; Chapman, Simon; Cundy, Tim; Petrie, Keith J

    2014-01-01

    The worldwide expansion of wind energy has met with opposition based on concerns that the infrasound generated by wind turbines causes health problems in nearby residents. In this paper, we argue that health complaints are more likely to be explained by the nocebo response, whereby adverse effects are generated by negative expectations. When individuals expect a feature of their environment or medical treatment to produce illness or symptoms, then this may start a process where the individual looks for symptoms or signs of illness to confirm these negative expectations. As physical symptoms are common in healthy people, there is considerable scope for people to match symptoms with their negative expectations. To support this hypothesis, we draw an evidence from experimental studies that show that, during exposure to wind farm sound, expectations about infrasound can influence symptoms and mood in both positive and negative directions, depending on how expectations are framed. We also consider epidemiological work showing that health complaints have primarily been located in areas that have received the most negative publicity about the harmful effects of turbines. The social aspect of symptom complaints in a community is also discussed as an important process in increasing symptom reports. Media stories, publicity, or social discourse about the reported health effects of wind turbines are likely to trigger reports of similar symptoms, regardless of exposure. Finally, we present evidence to show that the same pattern of health complaints following negative information about wind turbines has also been found in other types of environmental concerns and scares. PMID:25426482

  1. An acoustic-array based structural health monitoring technique for wind turbine blades

    NASA Astrophysics Data System (ADS)

    Aizawa, Kai; Poozesh, Peyman; Niezrecki, Christopher; Baqersad, Javad; Inalpolat, Murat; Heilmann, Gunnar

    2015-04-01

    This paper proposes a non-contact measurement technique for health monitoring of wind turbine blades using acoustic beamforming techniques. The technique works by mounting an audio speaker inside a wind turbine blade and observing the sound radiated from the blade to identify damage within the structure. The main hypothesis for the structural damage detection is that the structural damage (cracks, edge splits, holes etc.) on the surface of a composite wind turbine blade results in changes in the sound radiation characteristics of the structure. Preliminary measurements were carried out on two separate test specimens, namely a composite box and a section of a wind turbine blade to validate the methodology. The rectangular shaped composite box and the turbine blade contained holes with different dimensions and line cracks. An acoustic microphone array with 62 microphones was used to measure the sound radiation from both structures when the speaker was located inside the box and also inside the blade segment. A phased array beamforming technique and CLEAN-based subtraction of point spread function from a reference (CLSPR) were employed to locate the different damage types on both the composite box and the wind turbine blade. The same experiment was repeated by using a commercially available 48-channel acoustic ring array to compare the test results. It was shown that both the acoustic beamforming and the CLSPR techniques can be used to identify the damage in the test structures with sufficiently high fidelity.

  2. Structural health and prognostics management for offshore wind turbines : an initial roadmap.

    SciTech Connect

    Griffith, Daniel Todd; Resor, Brian Ray; White, Jonathan Randall; Paquette, Joshua A.; Yoder, Nathanael C.

    2012-12-01

    Operations and maintenance costs for offshore wind plants are expected to be significantly higher than the current costs for onshore plants. One way in which these costs may be able to be reduced is through the use of a structural health and prognostic management system as part of a condition based maintenance paradigm with smart load management. To facilitate the creation of such a system a multiscale modeling approach has been developed to identify how the underlying physics of the system are affected by the presence of damage and how these changes manifest themselves in the operational response of a full turbine. The developed methodology was used to investigate the effects of a candidate blade damage feature, a trailing edge disbond, on a 5-MW offshore wind turbine and the measurements that demonstrated the highest sensitivity to the damage were the local pitching moments around the disbond. The multiscale method demonstrated that these changes were caused by a local decrease in the blade's torsional stiffness due to the disbond, which also resulted in changes in the blade's local strain field. Full turbine simulations were also used to demonstrate that derating the turbine power by as little as 5% could extend the fatigue life of a blade by as much as a factor of 3. The integration of the health monitoring information, conceptual repair cost versus damage size information, and this load management methodology provides an initial roadmap for reducing operations and maintenance costs for offshore wind farms while increasing turbine availability and overall profit.

  3. The impact of user's perceived ability on online health information acceptance.

    PubMed

    Kim, Nam Eun; Han, Sang Sook; Yoo, Keun Hee; Yun, Eun Kyoung

    2012-11-01

    The purpose of this study was to explain how perceived ability affects users' acceptance of online health information in Korea. Data were collected by a Web-based survey, and, in total, 449 samples were used for final analysis. The hypothetical model of this study was based on the Technology Acceptance Model. A structural equation modeling was used to evaluate the relationship between the included variables. The final model with appropriate relations exhibited an adequate fit to the data. This study provides evidence that perceived ease of use, perceived usefulness, and perceived credibility significantly affect how individuals use health information from the Internet. The subjective health knowledge and Internet efficacy exerted strong indirect effects on users' attitude and intention to use the online health information via the mediators of perceived ease of use, perceived usefulness, and perceived credibility. This study supports the hypothesis that the perceived ability of users is related to their acceptance of online health information. Users' perceived ability, including subjective health knowledge and Internet efficacy, was confirmed as a prerequisite for their health information use on the Internet. The results demonstrated that perceived ease of use, perceived usefulness, and perceived credibility are substantive mediators. Future research should consider a wider array of characteristics of health information and users and incorporate these characteristics for the provision of more useful, user-centered health information. PMID:23072632

  4. Utilizing the health belief model to assess vaccine acceptance of patients on hemodialysis.

    PubMed

    Adams, Angela; Hall, Mellisa; Fulghum, Janis

    2014-01-01

    Vaccine rates in patients on hemodialysis are substantially lower than the Healthy People 2020 targets. The purpose of this study is to utilize the perceptions and cues for action constructs of the Health Belief Model (HBM) to assess the attitudes of patients receiving outpatient hemodialysis regarding acceptance of the seasonal influenza, pneumococcal, and hepatitis B virus vaccines. Vaccine acceptance is defined as receiving the vaccine. Study findings suggest age, perceived susceptibility, and perceived severity increase the odds of getting some vaccines. Findings have implications for the development of patient education materials, interdisciplinary team assessments, and plan of care strategies to increase vaccine acceptance. PMID:25244894

  5. Properly Interpreting the Epidemiologic Evidence about the Health Effects of Industrial Wind Turbines on Nearby Residents

    ERIC Educational Resources Information Center

    Phillips, Carl V.

    2011-01-01

    There is overwhelming evidence that wind turbines cause serious health problems in nearby residents, usually stress-disorder-type diseases, at a nontrivial rate. The bulk of the evidence takes the form of thousands of adverse event reports. There is also a small amount of systematically gathered data. The adverse event reports provide compelling…

  6. The effect of acceptance training on psychological and physical health outcomes in elders with chronic conditions.

    PubMed

    McDonald, Patricia E; Zauszniewski, Jaclene A; Bekhet, Abir K; DeHelian, Laura; Morris, Diana L

    2011-12-01

    This pilot trial investigated the short and long-term effects of Acceptance Training (ACT) intervention on acceptance, perceived health, functional status, anxiety, and depression in elders with chronic conditions living in retirement communities (RCs). The ACT intervention combined Rational Emotive Behavior Therapy with music, relaxation, and guided imagery during six weekly 2-hour sessions. Face-to-face interviews were conducted with 16 African-American and 46 White elders across four data collection points in six randomly selected RCs using well-established measures of perceived health, functional status, anxiety, and depression, and a measure of acceptance of chronic conditions adapted from a previous measure of acceptance of diabetes. While changes were found in perceived health, functional status, anxiety, and depression, the most significant changes occurred in the elders' acceptance of chronic conditions immediately after the intervention (t = -2.62, p < .02), and these changes persisted for 6 and 12 weeks (t's = -2.74, -3.32, p's < .01), respectively. Although a 40% attrition rate reduced the sample size from 62 (N = 62) to 37 (N = 37), the significant increases in acceptance over time provide initial evidence for the fidelity of the ACT intervention. PMID:23061175

  7. Remote Structural Health Monitoring and Advanced Prognostics of Wind Turbines

    SciTech Connect

    Douglas Brown; Bernard Laskowski

    2012-05-29

    The prospect of substantial investment in wind energy generation represents a significant capital investment strategy. In order to maximize the life-cycle of wind turbines, associated rotors, gears, and structural towers, a capability to detect and predict (prognostics) the onset of mechanical faults at a sufficiently early stage for maintenance actions to be planned would significantly reduce both maintenance and operational costs. Advancement towards this effort has been made through the development of anomaly detection, fault detection and fault diagnosis routines to identify selected fault modes of a wind turbine based on available sensor data preceding an unscheduled emergency shutdown. The anomaly detection approach employs spectral techniques to find an approximation of the data using a combination of attributes that capture the bulk of variability in the data. Fault detection and diagnosis (FDD) is performed using a neural network-based classifier trained from baseline and fault data recorded during known failure conditions. The approach has been evaluated for known baseline conditions and three selected failure modes: pitch rate failure, low oil pressure failure and a gearbox gear-tooth failure. Experimental results demonstrate the approach can distinguish between these failure modes and normal baseline behavior within a specified statistical accuracy.

  8. Investigation of Data Fusion Applied to Health Monitoring of Wind Turbine Drive train Components

    NASA Technical Reports Server (NTRS)

    Dempsey, Paula J.; Sheng, Shuangwen

    2011-01-01

    The research described was performed on diagnostic tools used to detect damage to dynamic mechanical components in a wind turbine gearbox. Different monitoring technologies were evaluated by collecting vibration and oil debris data from tests performed on a "healthy" gearbox and a damaged gearbox in a dynamometer test stand located at the National Renewable Energy Laboratory. The damaged gearbox tested was removed from the field after experiencing component damage due to two losses of oil events and was retested under controlled conditions in the dynamometer test stand. Preliminary results indicate oil debris and vibration can be integrated to assess the health of the wind turbine gearbox.

  9. Factors influencing nursing students' acceptance of electronic health records for nursing education (EHRNE) software program.

    PubMed

    Kowitlawakul, Yanika; Chan, Sally Wai Chi; Pulcini, Joyce; Wang, Wenru

    2015-01-01

    The Institute of Medicine (IOM) and the Health Information Technology Act (2009) in America had recommended that electronic health records (EHRs) should be fully adopted by 2014. This has urged educational institutions to prepare healthcare professionals to be competent in using electronic health records (EHRs) while they are in schools. To equip nursing students with competency in using EHRs, an electronic health record for nursing education (EHRNE) has been developed and integrated it into nursing curricula. The purposes of the study were to investigate the factors influencing nursing students' acceptance of the EHRs in nursing education using the extended Technology Acceptance Model with self-efficacy as a conceptual framework. The study is a descriptive study design using self-reported questionnaires with 212 student participants. The IBM SPSS and AMOS 22.0 were used to analyze the data. The results showed that attitude toward using the EHRNE was the most influential factor on students' acceptance. The preliminary findings suggested that to enhance the students' acceptance of the EHRNE, cultivation of a positive attitude toward using this EHR as well as increasing the perceived usefulness is very important. Also, the study's framework could be used in guiding learning health informatics and be applied to nursing students. PMID:24947068

  10. Aspects of structural health and condition monitoring of offshore wind turbines

    PubMed Central

    Antoniadou, I.; Dervilis, N.; Papatheou, E.; Maguire, A. E.; Worden, K.

    2015-01-01

    Wind power has expanded significantly over the past years, although reliability of wind turbine systems, especially of offshore wind turbines, has been many times unsatisfactory in the past. Wind turbine failures are equivalent to crucial financial losses. Therefore, creating and applying strategies that improve the reliability of their components is important for a successful implementation of such systems. Structural health monitoring (SHM) addresses these problems through the monitoring of parameters indicative of the state of the structure examined. Condition monitoring (CM), on the other hand, can be seen as a specialized area of the SHM community that aims at damage detection of, particularly, rotating machinery. The paper is divided into two parts: in the first part, advanced signal processing and machine learning methods are discussed for SHM and CM on wind turbine gearbox and blade damage detection examples. In the second part, an initial exploration of supervisor control and data acquisition systems data of an offshore wind farm is presented, and data-driven approaches are proposed for detecting abnormal behaviour of wind turbines. It is shown that the advanced signal processing methods discussed are effective and that it is important to adopt these SHM strategies in the wind energy sector. PMID:25583864

  11. Aspects of structural health and condition monitoring of offshore wind turbines.

    PubMed

    Antoniadou, I; Dervilis, N; Papatheou, E; Maguire, A E; Worden, K

    2015-02-28

    Wind power has expanded significantly over the past years, although reliability of wind turbine systems, especially of offshore wind turbines, has been many times unsatisfactory in the past. Wind turbine failures are equivalent to crucial financial losses. Therefore, creating and applying strategies that improve the reliability of their components is important for a successful implementation of such systems. Structural health monitoring (SHM) addresses these problems through the monitoring of parameters indicative of the state of the structure examined. Condition monitoring (CM), on the other hand, can be seen as a specialized area of the SHM community that aims at damage detection of, particularly, rotating machinery. The paper is divided into two parts: in the first part, advanced signal processing and machine learning methods are discussed for SHM and CM on wind turbine gearbox and blade damage detection examples. In the second part, an initial exploration of supervisor control and data acquisition systems data of an offshore wind farm is presented, and data-driven approaches are proposed for detecting abnormal behaviour of wind turbines. It is shown that the advanced signal processing methods discussed are effective and that it is important to adopt these SHM strategies in the wind energy sector. PMID:25583864

  12. The Acceptance of e-Health Solutions Among Patients with Chronic Respiratory Conditions

    PubMed Central

    2013-01-01

    Abstract Objective: The main objective of this study was to assess the acceptance of the use of e-health applications by patients suffering from bronchial asthma and other chronic respiratory conditions. Subjects and Methods: The questionnaire, consisting of 73 items, was distributed among 200 patients remaining under the care of a tertiary-care pulmonology center in Krakow, Poland (return rate, 82.5%; n=165). Results: The mean age (standard deviation) of respondents was 50.8 (14.9) years. Of the respondents, 48.5% (n=80) suffered from bronchial asthma, 29.1% (n=48) from chronic obstructive pulmonary disease, and 32.1% (n=53) from other respiratory diseases. The Internet was used by 58.2% (n=96) of respondents. The most frequent types of health-related information searched for online included diseases (59.4%) and treatments (medication, 54.2%; treatment options, 58.3%), as well as information about physicians and healthcare institutions (32.3% and 31.3%, respectively). The differences between acceptance scores for specific e-health applications were significant (analysis of variance, Friedman chi-squared=166.315, p<0.001). The respondents revealed the highest acceptance of e-health solutions allowing them to book appointments with physicians, access laboratory test results, view educational resources, and renew prescriptions. The acceptance of the most popular e-health applications depended on the duration of disease, respondent's age and education, and his or her use of computers and the Internet. Conclusions: Patients suffering from chronic respiratory conditions demonstrate higher levels of acceptance of e-health applications such as appointment booking, prescription renewal, and access to information (laboratory test results, educational resources) than of solutions directly related to medical care (communication with healthcare providers, disease monitoring). PMID:23734700

  13. Perception of primary care pediatricians of effectiveness, acceptability, and availability of mental health services.

    PubMed

    Dempster, Nicole R; Wildman, Beth G; Duby, John

    2015-06-01

    Approximately 20% of children in the United States meet the criteria for a psychosocial disorder; however, less than 25% of these children receive psychosocial services. A questionnaire assessed primary care pediatricians' (PCPs) perceptions of effectiveness, availability, and burden of treatment options for children's psychosocial difficulties and parents' acceptance and adherence with these treatments. Repeated measures analysis of variance found that PCPs are more likely to refer children with psychosocial problems to a mental health professional than to prescribe medication. PCPs prescribe medications more than counseling parents themselves or watchful waiting. PCPs reported children's behavior is more likely to improve with mental health services than with medication, though medication is the most available treatment. PCPs believe parent training programs are very effective for treating children's behavior problems, but believe parents are more accepting and compliant with other treatments. Findings indicate PCPs' perceptions of availability and acceptability of treatment options drive their treatment recommendations of psychosocial problems. PMID:24130062

  14. Soy Goes to School: Acceptance of Healthful, Vegetarian Options in Maryland Middle School Lunches

    ERIC Educational Resources Information Center

    Lazor, Kathleen; Chapman, Nancy; Levine, Elyse

    2010-01-01

    Background: Soyfoods provide healthful options for school breakfasts and lunches that are lower in saturated fat, cholesterol, fat, and calories and can help meet demands for vegetarian choices. Researchers tested acceptance of soy-based options substituted for popular lunch items with a diverse student population. Methods: Researchers conducted a…

  15. Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in COAL IGCC Powerplants

    SciTech Connect

    Kenneth A. Yackly

    2004-09-30

    The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, has been re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for Coal IGCC powerplants. The new program has been re-titled as ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants'' to better match the new scope. This technical progress report summarizes the work accomplished in the reporting period April 1, 2004 to August 31, 2004 on the revised Re-Directed and De-Scoped program activity. The program Tasks are: Task 1--IGCC Environmental Impact on high Temperature Materials: This first materials task has been refocused to address Coal IGCC environmental impacts on high temperature materials use in gas turbines and remains in the program. This task will screen material performance and quantify the effects of high temperature erosion and corrosion of hot gas path materials in Coal IGCC applications. The materials of interest will include those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: This second task develops and demonstrates new sensor technologies to determine the in-service health of advanced technology Coal IGCC powerplants, and remains in the program with a reduced scope. Its focus is now on only two critical sensor need areas for advanced Coal IGCC gas turbines: (1) Fuel Quality Sensor for detection of fuel impurities that could lead to rapid component degradation, and a Fuel Heating Value Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware.

  16. Why should I?--Acceptance of Health Information Technology Among health professionals.

    PubMed

    D'Souza, Joseph M J; Hunter, Inga

    2015-01-01

    Applying the Technology Acceptance Model, the end user intentions to use technology applications is studied. The study finds the end users negative perception of the usefulness of the application as a major factor in its suboptimal utilisation. PMID:26262264

  17. Reducing uncertainty in wind turbine blade health inspection with image processing techniques

    NASA Astrophysics Data System (ADS)

    Zhang, Huiyi

    Structural health inspection has been widely applied in the operation of wind farms to find early cracks in wind turbine blades (WTBs). Increased numbers of turbines and expanded rotor diameters are driving up the workloads and safety risks for site employees. Therefore, it is important to automate the inspection process as well as minimize the uncertainties involved in routine blade health inspection. In addition, crack documentation and trending is vital to assess rotor blade and turbine reliability in the 20 year designed life span. A new crack recognition and classification algorithm is described that can support automated structural health inspection of the surface of large composite WTBs. The first part of the study investigated the feasibility of digital image processing in WTB health inspection and defined the capability of numerically detecting cracks as small as hairline thickness. The second part of the study identified and analyzed the uncertainty of the digital image processing method. A self-learning algorithm was proposed to recognize and classify cracks without comparing a blade image to a library of crack images. The last part of the research quantified the uncertainty in the field conditions and the image processing methods.

  18. Sensors and Rotordynamics Health Management Research for Aircraft Turbine Engines

    NASA Technical Reports Server (NTRS)

    Lekki, J.; Abdul-Aziz, A.; Adamovsky, G.; Berger, D.; Fralick, G.; Gyekenyesi, A.; Hunter, G.; Tokars, R.; Venti, M.; Woike, M.; Wrbanek, J.; Wrbanek, S.

    2011-01-01

    Develop Advanced Sensor Technology and rotordynamic structural diagnostics to address existing Aviation Safety Propulsion Health Management needs as well as proactively begin to address anticipated safety issues for new technologies.

  19. Acceptability of Mental Health Apps for Aboriginal and Torres Strait Islander Australians: A Qualitative Study

    PubMed Central

    Mills, Patj Patj Janama Robert; Dingwall, Kylie Maree; Lowell, Anne; Singer, Judy; Rotumah, Darlene; Bennett-Levy, James; Nagel, Tricia

    2016-01-01

    Background Aboriginal and Torres Strait Islander Australians experience high rates of mental illness and psychological distress compared to their non-Indigenous counterparts. E-mental health tools offer an opportunity for accessible, effective, and acceptable treatment. The AIMhi Stay Strong app and the ibobbly suicide prevention app are treatment tools designed to combat the disproportionately high levels of mental illness and stress experienced within the Aboriginal and Torres Strait Islander community. Objective This study aimed to explore Aboriginal and Torres Strait Islander community members’ experiences of using two culturally responsive e-mental health apps and identify factors that influence the acceptability of these approaches. Methods Using qualitative methods aligned with a phenomenological approach, we explored the acceptability of two culturally responsive e-mental health apps through a series of three 3-hour focus groups with nine Aboriginal and Torres Strait Islander community members. Thematic analysis was conducted and coresearcher and member checking were used to verify findings. Results Findings suggest strong support for the concept of e-mental health apps and optimism for their potential. Factors that influenced acceptability related to three key themes: personal factors (eg, motivation, severity and awareness of illness, technological competence, and literacy and language differences), environmental factors (eg, community awareness, stigma, and availability of support), and app characteristics (eg, ease of use, content, graphics, access, and security and information sharing). Specific adaptations, such as local production, culturally relevant content and graphics, a purposeful journey, clear navigation, meaningful language, options to assist people with language differences, offline use, and password protection may aid uptake. Conclusions When designed to meet the needs of Aboriginal and Torres Strait Islander Australians, e-mental health

  20. Acceptability of a Mobile Health Unit for Rural HIV Clinical Trial Enrollment and Participation

    PubMed Central

    Miles, Margaret Shandor; Banks, Bahby; Corbie-Smith, Giselle

    2013-01-01

    Few rural minorities participate in HIV clinical trials. Mobile health units (MHUs) may be one strategy to increase participation. We explored community perceptions of MHU acceptability to increase clinical trial participation for rural minorities living with HIV/AIDS. We conducted 11 focus groups (service providers and community leaders) and 35 interviews (people living with HIV/AIDS). Responses were analyzed using constant comparative and content analysis techniques. Acceptable MHU use included maintaining accessibility and confidentiality while establishing credibility, community ownership and control. Under these conditions, MHUs can service rural locations and overcome geographic barriers to reaching major medical centers for clinical trials. PMID:22350829

  1. Health-based audible noise guidelines account for infrasound and low-frequency noise produced by wind turbines.

    PubMed

    Berger, Robert G; Ashtiani, Payam; Ollson, Christopher A; Whitfield Aslund, Melissa; McCallum, Lindsay C; Leventhall, Geoff; Knopper, Loren D

    2015-01-01

    Setbacks for wind turbines have been established in many jurisdictions to address potential health concerns associated with audible noise. However, in recent years, it has been suggested that infrasound (IS) and low-frequency noise (LFN) could be responsible for the onset of adverse health effects self-reported by some individuals living in proximity to wind turbines, even when audible noise limits are met. The purpose of this paper was to investigate whether current audible noise-based guidelines for wind turbines account for the protection of human health, given the levels of IS and LFN typically produced by wind turbines. New field measurements of indoor IS and outdoor LFN at locations between 400 and 900 m from the nearest turbine, which were previously underrepresented in the scientific literature, are reported and put into context with existing published works. Our analysis showed that indoor IS levels were below auditory threshold levels while LFN levels at distances >500 m were similar to background LFN levels. A clear contribution to LFN due to wind turbine operation (i.e., measured with turbines on in comparison to with turbines off) was noted at a distance of 480 m. However, this corresponded to an increase in overall audible sound measures as reported in dB(A), supporting the hypothesis that controlling audible sound produced by normally operating wind turbines will also control for LFN. Overall, the available data from this and other studies suggest that health-based audible noise wind turbine siting guidelines provide an effective means to evaluate, monitor, and protect potential receptors from audible noise as well as IS and LFN. PMID:25759808

  2. Health-Based Audible Noise Guidelines Account for Infrasound and Low-Frequency Noise Produced by Wind Turbines

    PubMed Central

    Berger, Robert G.; Ashtiani, Payam; Ollson, Christopher A.; Whitfield Aslund, Melissa; McCallum, Lindsay C.; Leventhall, Geoff; Knopper, Loren D.

    2015-01-01

    Setbacks for wind turbines have been established in many jurisdictions to address potential health concerns associated with audible noise. However, in recent years, it has been suggested that infrasound (IS) and low-frequency noise (LFN) could be responsible for the onset of adverse health effects self-reported by some individuals living in proximity to wind turbines, even when audible noise limits are met. The purpose of this paper was to investigate whether current audible noise-based guidelines for wind turbines account for the protection of human health, given the levels of IS and LFN typically produced by wind turbines. New field measurements of indoor IS and outdoor LFN at locations between 400 and 900 m from the nearest turbine, which were previously underrepresented in the scientific literature, are reported and put into context with existing published works. Our analysis showed that indoor IS levels were below auditory threshold levels while LFN levels at distances >500 m were similar to background LFN levels. A clear contribution to LFN due to wind turbine operation (i.e., measured with turbines on in comparison to with turbines off) was noted at a distance of 480 m. However, this corresponded to an increase in overall audible sound measures as reported in dB(A), supporting the hypothesis that controlling audible sound produced by normally operating wind turbines will also control for LFN. Overall, the available data from this and other studies suggest that health-based audible noise wind turbine siting guidelines provide an effective means to evaluate, monitor, and protect potential receptors from audible noise as well as IS and LFN. PMID:25759808

  3. Structural health monitoring of wind turbine blades : SE 265 Final Project.

    SciTech Connect

    Barkley, W. C.; Jacobs, Laura D.; Rutherford, A. C.; Puckett, Anthony

    2006-03-23

    ACME Wind Turbine Corporation has contacted our dynamic analysis firm regarding structural health monitoring of their wind turbine blades. ACME has had several failures in previous years. Examples are shown in Figure 1. These failures have resulted in economic loss for the company due to down time of the turbines (lost revenue) and repair costs. Blade failures can occur in several modes, which may depend on the type of construction and load history. Cracking and delamination are some typical modes of blade failure. ACME warranties its turbines and wishes to decrease the number of blade failures they have to repair and replace. The company wishes to implement a real time structural health monitoring system in order to better understand when blade replacement is necessary. Because of warranty costs incurred to date, ACME is interested in either changing the warranty period for the blades in question or predicting imminent failure before it occurs. ACME's current practice is to increase the number of physical inspections when blades are approaching the end of their fatigue lives. Implementation of an in situ monitoring system would eliminate or greatly reduce the need for such physical inspections. Another benefit of such a monitoring system is that the life of any given component could be extended since real conditions would be monitored. The SHM system designed for ACME must be able to operate while the wind turbine is in service. This means that wireless communication options will likely be implemented. Because blade failures occur due to cyclic stresses in the blade material, the sensing system will focus on monitoring strain at various points.

  4. Fundamental Technology Development for Gas-Turbine Engine Health Management

    NASA Technical Reports Server (NTRS)

    Mercer, Carolyn R.; Simon, Donald L.; Hunter, Gary W.; Arnold, Steven M.; Reveley, Mary S.; Anderson, Lynn M.

    2007-01-01

    Integrated vehicle health management technologies promise to dramatically improve the safety of commercial aircraft by reducing system and component failures as causal and contributing factors in aircraft accidents. To realize this promise, fundamental technology development is needed to produce reliable health management components. These components include diagnostic and prognostic algorithms, physics-based and data-driven lifing and failure models, sensors, and a sensor infrastructure including wireless communications, power scavenging, and electronics. In addition, system assessment methods are needed to effectively prioritize development efforts. Development work is needed throughout the vehicle, but particular challenges are presented by the hot, rotating environment of the propulsion system. This presentation describes current work in the field of health management technologies for propulsion systems for commercial aviation.

  5. Designing an intelligent health monitoring system and exploring user acceptance for the elderly.

    PubMed

    Tseng, Kevin C; Hsu, Chien-Lung; Chuang, Yu-Hao

    2013-12-01

    Recently, many healthcare or health monitoring systems are proposed to improve life quality of the elderly in the aging process. The elderly are generally with poor health and low information literacy. Low information literacy might be an obstacle of using such systems. This research considered the characteristics and the needs of the elderly and developed an intelligent health monitoring system for the elderly with low information literacy living in the nursing home. The system is intelligent since it can monitor the health status of the elderly based on clinical and medical knowledge, provide an easy-to-understand and easy-to-use user interface for the elderly, and automatically send important or emergency feedback to caregivers. Finally, we explored the user acceptance for the elderly using our proposed system based on the unified theory of acceptance and user of technology model. The experimental results indicate the developed system is highly accepted by the elderly in terms of performance expectation, endeavor expectation, social influence, and facilitating condition. PMID:24037138

  6. Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants

    SciTech Connect

    Kenneth A. Yackly

    2005-12-01

    The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, was re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for coal/IGCC powerplants. The new program was re-titled ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants''. This final report summarizes the work accomplished from March 1, 2003 to March 31, 2004 on the four original tasks, and the work accomplished from April 1, 2004 to July 30, 2005 on the two re-directed tasks. The program Tasks are summarized below: Task 1--IGCC Environmental Impact on high Temperature Materials: The first task was refocused to address IGCC environmental impacts on high temperature materials used in gas turbines. This task screened material performance and quantified the effects of high temperature erosion and corrosion of hot gas path materials in coal/IGCC applications. The materials of interest included those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: The second task was reduced in scope to demonstrate new technologies to determine the inservice health of advanced technology coal/IGCC powerplants. The task focused on two critical sensing needs for advanced coal/IGCC gas turbines: (1) Fuel Quality Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and detection of fuel impurities that could lead to rapid component degradation. (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware. Task 3--Advanced Methods for Combustion Monitoring and Control: The third task was originally to develop and validate advanced monitoring and control methods for coal/IGCC gas turbine combustion systems. This task was

  7. Evaluating the impact of wind turbine noise on health-related quality of life.

    PubMed

    Shepherd, Daniel; McBride, David; Welch, David; Dirks, Kim N; Hill, Erin M

    2011-01-01

    We report a cross-sectional study comparing the health-related quality of life (HRQOL) of individuals residing in the proximity of a wind farm to those residing in a demographically matched area sufficiently displaced from wind turbines. The study employed a nonequivalent comparison group posttest-only design. Self-administered questionnaires, which included the brief version of the World Health Organization quality of life scale, were delivered to residents in two adjacent areas in semirural New Zealand. Participants were also asked to identify annoying noises, indicate their degree of noise sensitivity, and rate amenity. Statistically significant differences were noted in some HRQOL domain scores, with residents living within 2 km of a turbine installation reporting lower overall quality of life, physical quality of life, and environmental quality of life. Those exposed to turbine noise also reported significantly lower sleep quality, and rated their environment as less restful. Our data suggest that wind farm noise can negatively impact facets of HRQOL. PMID:21959113

  8. Investigating the feasibility and acceptability of health psychology-informed obesity training for medical students.

    PubMed

    Chisholm, Anna; Hart, Jo; Mann, Karen; Perry, Mark; Duthie, Harriet; Rezvani, Leila; Peters, Sarah

    2016-04-01

    Health psychologists have succeeded in identifying theory-congruent behaviour change techniques (BCTs) to prevent and reduce lifestyle-related illnesses, such as cardiovascular disease, cancers and diabetes. Obesity management discussions between doctors and patients can be challenging and are often avoided. Despite a clear training need, it is unknown how best to tailor BCT research findings to inform obesity-management training for future healthcare professionals. The primary objective of this descriptive study was to gather information on the feasibility and acceptability of delivering and evaluating health psychology-informed obesity training to UK medical students. Medical students (n = 41) attended an obesity management session delivered by GP tutors. Sessions were audio-recorded to enable fidelity checks. Acceptability of training was explored qualitatively. Tutors consistently delivered training according to the intervention protocol; and students and tutors found the training highly acceptable. This psychology-informed training can be delivered successfully by GP tutors and further research is warranted to explore its efficacy. PMID:26208893

  9. Public views of acceptability of perinatal mental health screening and treatment preference: a population based survey

    PubMed Central

    2014-01-01

    acceptability of universal perinatal mental health screening among the public provides a strong message regarding the public value for routine screening during pregnancy and postpartum periods. Perinatal mental health literacy is the most prominent determinant of screening and treatment acceptability and preference. Efforts to enhance population literacy as part of a multifaceted perinatal mental health strategy may optimize pregnant and postpartum women’s mental health. PMID:24521267

  10. The readability and audience acceptance of printed health promotion materials used by environmental health departments.

    PubMed

    Harvey, Harold D; Fleming, Paul

    2003-01-01

    A significant part of the work of an environmental health professional is the communication of information to clients, customers, and the public in the context of safety and health promotion or as an adjunct to enforcement activities. While a wide range of communication methods are available today, printed material still forms an important aspect of the communications methodology of environmental health departments. This paper raises a number of questions about the effectiveness of environmental health promotion brochures in common use in the United Kingdom and the problems that could arise from simply assuming that the brochures are conveying the intended message to the target audience. Through a series of case studies conducted in environmental health departments, evaluative data on a range of brochures were gathered in two interlinked stages: a readability test and a target-audience questionnaire survey. The sources of the brochures included the central government, charities, trade unions, and commercial enterprises; some brochures were produced "in house." Results indicated a common mismatch between the estimated reading age of the target audience and the reading age determined by the readability test; concern about the efficacy of using commercially sourced brochures carrying advertising that may conflict with advice on other environmental health issues; "in-house" brochures that appeared to optimize self-promotion rather than the conveyance of topic information; ineffective brochures used as an adjunct to enforcement activity; and the possibility that the latter could be introduced as defense evidence in related legal proceedings. Overall, the study showed that a well-structured method for brochure choice and ongoing evaluation are essential tools for environmental health departments seeking to maximize their resources and effectiveness. PMID:12575638

  11. Measuring electromagnetic fields (EMF) around wind turbines in Canada: is there a human health concern?

    PubMed Central

    2014-01-01

    nothing unique to wind farms with respect to EMF exposure; in fact, magnetic field levels in the vicinity of wind turbines were lower than those produced by many common household electrical devices and were well below any existing regulatory guidelines with respect to human health. PMID:24529028

  12. Economics of online structural health monitoring of wind turbines: Cost benefit analysis

    NASA Astrophysics Data System (ADS)

    Van Dam, Jeremy; Bond, Leonard J.

    2015-03-01

    Operations and maintenance (O&M) costs have an average share over the lifetime of the turbine of approximately 20%-25% of the total levelized cost per kWh of electricity produced. Online structural health monitoring (OSHM) and condition-based maintenance (CBM) of wind turbine blades has the potential to reduce O&M costs and hence reduce the overall cost of wind energy. OSHM and CBM offer the potential to improve turbine blade life cycle management, limit the number of physical inspections, and reduce the potential for missed significant defects. An OSHM system would reduce the need for physical inspections, and have inspections occur only after problem detection takes place. In the economics of wind energy, failures and unplanned outages can cause significant downtime, particularly while waiting for the manufacturing and shipping of major parts. This paper will report a review and assessment of SHM technologies and a cost benefit analysis, which will examine whether the added costs associated with an OSHM system will give an adequate return on the investment. One method in which OSHM reduces costs is, in part, by converting corrective maintenance to preventative maintenance. This paper shows that under both best and worse conditions implementing an OSHM system is cost effective in more than 50% of the trials, which have been performed. Opportunities appear to exist to improve the economic justification for implementing OSHM.

  13. Promoting multi‐micronutrient powders (MNP) in Peru: acceptance by caregivers and role of health personnel

    PubMed Central

    Bartolini, Rosario; Abad, Melissa; Arevalo, Varinia

    2015-01-01

    Abstract Iron deficiency causes anaemia and other adverse effects on the nutritional status and development of millions of children. Multi‐micronutrient powders (MNP) have been shown to reduce anaemia in young children. In Peru, 50% of children 6–36 months are anaemic. Since 2009, the government has started distributing MNP. This qualitative study explored the acceptability of MNP by caregivers and the role of health personnel (HP) in three regions (Apurimac, Ayacucho and Cajamarca), piloting the MNP programme between 2009 and 2011. Data collection consisted of interviews (35) and observations (13) with caregivers and HP (11). In Cajamarca, 16 families were visited three times in their homes to understand caregivers' use and difficulties. Results showed the critical role HP has in influencing caregiver understanding and use of the MNP, as well as the need for training to avoid confusing messages and provide counselling techniques that consider cultural sensitivity to optimize HP interactions with caregivers and adapt the recommendations for MNP use to local family feeding routines. There was greater acceptance of MNP by caregivers giving semi‐solid foods (e.g. purees) to their children than those who served dilute preparations (e.g. soups). Acceptance was similar across regions, but there were some differences between urban and rural settings. Home visits were shown to be a key in improving the use of MNP by caregivers as misunderstandings on preparation, required consistency and optimum practices were common. These findings can contribute to strategies to enhance acceptability and use. Key messages Acceptance and use of multi‐micronutrient powders (MNP) by caregivers greatly depend upon how it is presented, promoted and counselled by health personnel.Counselling for MNP use needs to consider and adapt to the local cultural context and incorporate family and child feeding routines.MNP are presented as part of appropriate feeding practices, encouraging

  14. Adverse or acceptable: negotiating access to a post-apartheid health care contract

    PubMed Central

    2014-01-01

    fragile and post-conflict societies requires the negotiation of a new social contract. Surfacing and engaging with differences in patient and provider expectations of this contract may contribute to more acceptable, accessible health care services. Additionally, the health system is well positioned to highlight and connect the political economy, institutions and social relationships that create and sustain identities of exclusion and inclusion – (re)politicise suffering - and co-ordinate and lead intersectoral action for overcoming affordability and availability barriers to inclusive and equitable health care services. PMID:24885882

  15. Development of Self-Powered Wireless Structural Health Monitoring (SHM) for Wind Turbine Blades

    NASA Astrophysics Data System (ADS)

    Lim, Dong-Won

    Wind turbine blade failure can lead to unexpected power interruptions. Monitoring wind turbine blades is important to ensure seamless electricity delivery from power generation to consumers. Structural health monitoring (SHM) enables early recognition of structural problems so that the safety and reliability of operation can be enhanced. This dissertation focuses on the development of a wireless SHM system for wind turbine blades. The sensor is comprised of a piezoelectric energy harvester (EH) and a telemetry unit. The sensor node is mounted on the blade surface. As the blade rotates, the blade flexes, and the energy harvester captures the strain energy on the blade surface. Once sufficient electricity is captured, a pulse is sent from the sensing node to a gateway. Then, a central monitoring algorithm processes a series of pulses received from all three blades. This wireless SHM, which uses commercially available components, can be retrofitted to existing turbines. The harvested energy for sensing can be estimated in terms of two factors: the available strain energy and conversion efficiency. The available strain energy was evaluated using the FAST (Fatigue, Aerodynamics, Structures, and Turbulence) simulator. The conversion efficiency was studied analytically and experimentally. An experimental set-up was designed to mimic the expected strain frequency and amplitude for rotor blades. From a series of experiments, the efficiency of a piezoelectric EH at a typical rotor speed (0.2 Hz) was approximately 0.5%. The power requirement for sending one measurement (280 muJ) can be achieved in 10 minutes. Designing a detection algorithm is challenging due to this low sampling rate. A new sensing approach-the timing of pulses from the transmitter-was introduced. This pulse timing, which is tied to the charging time, is indicative of the structural health. The SHM system exploits the inherent triple redundancy of the three blades. The timing data of the three blades are

  16. Exploring Healthcare Consumer Acceptance of Personal Health Information Management Technology through Personal Health Record Systems

    ERIC Educational Resources Information Center

    Wu, Huijuan

    2013-01-01

    Healthcare technologies are evolving from a practitioner-centric model to a patient-centric model due to the increasing need for technology that directly serves healthcare consumers, including healthy people and patients. Personal health information management (PHIM) technology is one of the technologies designed to enhance an individual's ability…

  17. Propulsion Health Monitoring of a Turbine Engine Disk Using Spin Test Data

    NASA Technical Reports Server (NTRS)

    Abdul-Aziz, Ali; Woike, Mark R.; Oza, Nikunj; Matthews, Bryan; Baaklini, George Y.

    2010-01-01

    This paper considers data collected from an experimental study using high frequency capacitive sensor technology to capture blade tip clearance and tip timing measurements in a rotating turbine engine-like-disk-to predict the disk faults and assess its structural integrity. The experimental results collected at a range of rotational speeds from tests conducted at the NASA Glenn Research Center s Rotordynamics Laboratory are evaluated using multiple data-driven anomaly detection techniques to identify abnormalities in the disk. Further, this study presents a select evaluation of an online health monitoring scheme of a rotating disk using high caliber sensors and test the capability of the in-house spin system.

  18. Acceptance of the German e-mental health portal www.psychenet.de: an online survey.

    PubMed

    Tlach, Lisa; Thiel, Juliane; Härter, Martin; Liebherz, Sarah; Dirmaier, Jörg

    2016-01-01

    Background. Taking into account the high prevalence of mental disorders and the multiple barriers to the use of mental health services, new forms of fostering patient information, involvement, and self-management are needed to complement existing mental health services. The study aimed at investigating acceptance regarding design and content of the e-mental health portal www.psychenet.de. Methods. An online cross-sectional survey was conducted between May 2013 and May 2015 using a self-administered questionnaire including items on perceived ease of use, perceived usefulness, attitude towards using, and perceived trust. Effects of different participants' characteristics on the portals' acceptance were analyzed. Results. The majority of the N = 252 respondents suffered from mental disorders (n = 139) or were relatives from persons with mental disorders (n = 65). The portal was assessed as "good" or "very good" by 71% of the respondents. High levels of agreement (89-96%) were shown for statements on the perceived ease of use, the behavioral intention to use the portal, and the trustworthiness of the portal. Lower levels of agreement were shown for some statements on the perceived usefulness of the portals' content. There were no effects of different participants' characteristics on the perceived ease of use, the perceived usefulness, the attitude towards using the website and the perceived trust. Discussion. This survey provides preliminary evidence that the e-mental health portal www.psychenet.de appears to be a usable, useful and trustworthy information resource for a broad target group. The behavioral usefulness of the portals' content might be improved by integrating more activating patient decision aids. PMID:27547515

  19. Acceptance of the German e-mental health portal www.psychenet.de: an online survey

    PubMed Central

    Tlach, Lisa; Thiel, Juliane; Härter, Martin

    2016-01-01

    Background. Taking into account the high prevalence of mental disorders and the multiple barriers to the use of mental health services, new forms of fostering patient information, involvement, and self-management are needed to complement existing mental health services. The study aimed at investigating acceptance regarding design and content of the e-mental health portal www.psychenet.de. Methods. An online cross-sectional survey was conducted between May 2013 and May 2015 using a self-administered questionnaire including items on perceived ease of use, perceived usefulness, attitude towards using, and perceived trust. Effects of different participants’ characteristics on the portals’ acceptance were analyzed. Results. The majority of the N = 252 respondents suffered from mental disorders (n = 139) or were relatives from persons with mental disorders (n = 65). The portal was assessed as “good” or “very good” by 71% of the respondents. High levels of agreement (89–96%) were shown for statements on the perceived ease of use, the behavioral intention to use the portal, and the trustworthiness of the portal. Lower levels of agreement were shown for some statements on the perceived usefulness of the portals’ content. There were no effects of different participants’ characteristics on the perceived ease of use, the perceived usefulness, the attitude towards using the website and the perceived trust. Discussion. This survey provides preliminary evidence that the e-mental health portal www.psychenet.de appears to be a usable, useful and trustworthy information resource for a broad target group. The behavioral usefulness of the portals’ content might be improved by integrating more activating patient decision aids. PMID:27547515

  20. Acceptance and Use of Health Information Technology By Community-Dwelling Elders

    PubMed Central

    Fischer, Shira H; David, Daniel; Crotty, Bradley H; Dierks, Meghan; Safran, Charles

    2014-01-01

    Objectives With the worldwide population growing in age, information technology may help meet important needs to prepare and support patients and families for aging. We sought to explore the use and acceptance of information technology for health among the elderly by reviewing the existing literature. Methods Review of literature using PubMed and Google Scholar, references from relevant papers, and consultation with experts. Results Elderly people approach the Internet and health information technology differently than younger people, but have growing rates of adoption. Assistive technology, such as sensors or home monitors, may help ‘aging in place,' but these have not been thoroughly evaluated. Elders face many barriers to using technology for healthcare decision-making, including issues with familiarity, willingness to ask for help, trust of the technology, privacy, and design challenges. Conclusions Barriers must be addressed for these tools to be available to this growing population. Design, education, research, and policy all play roles in addressing these barriers to acceptance and use. PMID:24996581

  1. Future Issues and Approaches to Health Monitoring and Failure Prevention for Oil-Free Gas Turbines

    NASA Technical Reports Server (NTRS)

    DellaCorte, Christopher

    2004-01-01

    Recent technology advances in foil air bearings, high temperature solid lubricants and computer based modeling has enabled the development of small Oil-Free gas turbines. These turbomachines are currently commercialized as small (<100 kW) microturbine generators and larger machines are being developed. Based upon these successes and the high potential payoffs offered by Oil-Free systems, NASA, industry, and other government entities are anticipating Oil-Free gas turbine propulsion systems to proliferate future markets. Since an Oil-Free engine has no oil system, traditional approaches to health monitoring and diagnostics, such as chip detection, oil analysis, and possibly vibration signature analyses (e.g., ball pass frequency) will be unavailable. As such, new approaches will need to be considered. These could include shaft orbit analyses, foil bearing temperature measurements, embedded wear sensors and start-up/coast down speed analysis. In addition, novel, as yet undeveloped techniques may emerge based upon concurrent developments in MEMS technology. This paper introduces Oil-Free technology, reviews the current state of the art and potential for future turbomachinery applications and discusses possible approaches to health monitoring, diagnostics and failure prevention.

  2. Application of a wireless sensor node to health monitoring of operational wind turbine blades

    SciTech Connect

    Taylor, Stuart G; Farinholt, Kevin M; Park, Gyuhae; Farrar, Charles R; Todd, Michael D

    2009-01-01

    Structural health monitoring (SHM) is a developing field of research with a variety of applications including civil structures, industrial equipment, and energy infrastructure. An SHM system requires an integrated process of sensing, data interrogation and statistical assessment. The first and most important stage of any SHM system is the sensing system, which is traditionally composed of transducers and data acquisition hardware. However, such hardware is often heavy, bulky, and difficult to install in situ. Furthermore, physical access to the structure being monitored may be limited or restricted, as is the case for rotating wind turbine blades or unmanned aerial vehicles, requiring wireless transmission of sensor readings. This study applies a previously developed compact wireless sensor node to structural health monitoring of rotating small-scale wind turbine blades. The compact sensor node collects low-frequency structural vibration measurements to estimate natural frequencies and operational deflection shapes. The sensor node also has the capability to perform high-frequency impedance measurements to detect changes in local material properties or other physical characteristics. Operational measurements were collected using the wireless sensing system for both healthy and damaged blade conditions. Damage sensitive features were extracted from the collected data, and those features were used to classify the structural condition as healthy or damaged.

  3. Acceptability of quality reporting and pay for performance among primary health centers in Lebanon.

    PubMed

    Saleh, Shadi S; Alameddine, Mohamad S; Natafgi, Nabil M

    2013-01-01

    Primary health care (PHC) is emphasized as the cornerstone of any health care system. Enhancing PHC performance is considered a strategy to enhance effective and equitable access to care. This study assesses the acceptability of and factors associated with quality reporting among PHC centers (PHCCs) in Lebanon. The managers of 132 Lebanese Ministry of Health PHCCs were surveyed using a cross-sectional design. Managers' willingness to report quality, participate in comparative quality assessments, and endorse pay-for-performance schemes was evaluated. Collected data were matched to the infrastructural characteristics and services database. Seventy-six percent of managers responded to the questionnaire, 93 percent of whom were willing to report clinical performance. Most expressed strong support for peer-performance comparison and pay-for-performance schemes. Willingness to report was negatively associated with the religious affiliation of centers and presence of health care facilities in the catchment area and favorably associated with use of information systems and the size of population served. The great willingness of PHCC managers to employ quality-enhancing initiatives flags a policy priority for PHC stakeholders to strengthen PHCC infrastructure and to enable reporting in an easy, standardized, and systematic way. Enhancing equity necessitates education and empowerment of managers in remote areas and those managing religiously affiliated centers. PMID:24397238

  4. Diagnostic criteria for adverse health effects in the environs of wind turbines.

    PubMed

    McMurtry, Robert Y; Krogh, Carmen Me

    2014-10-01

    In an effort to address climate change, governments have pursued policies that seek to reduce greenhouse gases. Alternative energy, including wind power, has been proposed by some as the preferred approach. Few would debate the need to reduce air pollution, but the means of achieving this reduction is important not only for efficiency but also for health protection. The topic of adverse health effects in the environs of industrial wind turbines (AHE/IWT) has proven to be controversial and can present physicians with challenges regarding the management of an exposure to IWT. Rural physicians in particular must be aware of the possibility of people presenting to their practices with a variety of sometimes confusing complaints. An earlier version of the diagnostic criteria for AHE/IWT was published in August 2011. A revised case definition and a model for a study to establish a confirmed diagnosis is proposed. PMID:25383200

  5. Diagnostic criteria for adverse health effects in the environs of wind turbines

    PubMed Central

    Krogh, Carmen ME

    2014-01-01

    Summary In an effort to address climate change, governments have pursued policies that seek to reduce greenhouse gases. Alternative energy, including wind power, has been proposed by some as the preferred approach. Few would debate the need to reduce air pollution, but the means of achieving this reduction is important not only for efficiency but also for health protection. The topic of adverse health effects in the environs of industrial wind turbines (AHE/IWT) has proven to be controversial and can present physicians with challenges regarding the management of an exposure to IWT. Rural physicians in particular must be aware of the possibility of people presenting to their practices with a variety of sometimes confusing complaints. An earlier version of the diagnostic criteria for AHE/IWT was published in August 2011. A revised case definition and a model for a study to establish a confirmed diagnosis is proposed. PMID:25383200

  6. Community acceptability of use of rapid diagnostic tests for malaria by community health workers in Uganda

    PubMed Central

    2010-01-01

    Background Many malarious countries plan to introduce artemisinin combination therapy (ACT) at community level using community health workers (CHWs) for treatment of uncomplicated malaria. Use of ACT with reliance on presumptive diagnosis may lead to excessive use, increased costs and rise of drug resistance. Use of rapid diagnostic tests (RDTs) could address these challenges but only if the communities will accept their use by CHWs. This study assessed community acceptability of the use of RDTs by Ugandan CHWs, locally referred to as community medicine distributors (CMDs). Methods The study was conducted in Iganga district using 10 focus group discussions (FGDs) with CMDs and caregivers of children under five years, and 10 key informant interviews (KIIs) with health workers and community leaders. Pre-designed FGD and KII guides were used to collect data. Manifest content analysis was used to explore issues of trust and confidence in CMDs, stigma associated with drawing blood from children, community willingness for CMDs to use RDTs, and challenges anticipated to be faced by the CMDs. Results CMDs are trusted by their communities because of their commitment to voluntary service, access, and the perceived effectiveness of anti-malarial drugs they provide. Some community members expressed fear that the blood collected could be used for HIV testing, the procedure could infect children with HIV, and the blood samples could be used for witchcraft. Education level of CMDs is important in their acceptability by the community, who welcome the use of RDTs given that the CMDs are trained and supported. Anticipated challenges for CMDs included transport for patient follow-up and picking supplies, adults demanding to be tested, and caregivers insisting their children be treated instead of being referred. Conclusion Use of RDTs by CMDs is likely to be acceptable by community members given that CMDs are properly trained, and receive regular technical supervision and logistical

  7. WindVOiCe, a Self-Reporting Survey: Adverse Health Effects, Industrial Wind Turbines, and the Need for Vigilance Monitoring

    ERIC Educational Resources Information Center

    Krogh, Carmen M. E.; Gillis, Lorrie; Kouwen, Nicholas; Aramini, Jeff

    2011-01-01

    Industrial wind turbines have been operating in many parts of the globe. Anecdotal reports of perceived adverse health effects relating to industrial wind turbines have been published in the media and on the Internet. Based on these reports, indications were that some residents perceived they were experiencing adverse health effects. The purpose…

  8. Fomenting Sickness: Nocebo Priming of Residents about Expected Wind Turbine Health Harms.

    PubMed

    Chapman, Simon; Joshi, Ketan; Fry, Luke

    2014-01-01

    A nocebo effect hypothesis has been proposed to explain variations in where small minorities of exposed residents complain about noise and health effects said to be caused by wind farm turbines. The hypothesis requires that those complaining have been exposed to negative, potentially frightening information about the impact of proposed wind farms on nearby residents, and that this information conditions both expectations about future health impacts or the etiology of current health problems where wind farms are already operational. This hypothesis has been confirmed experimentally under laboratory conditions, but case studies of how this process can operate in local communities are lacking. In this paper, we present a case study of the apparent impact of an anti-wind farm public meeting on the generation of negative news media and the subsequent expression of concerns about anticipated health and noise impacts to a planning authority approval hearing in Victoria, Australia. We present a content analysis of the negative claims disseminated about health and noise in the news media and available on the internet prior to the hearing, and another content analysis of all submissions made to the planning authority by those opposing the development application. PMID:25566521

  9. Fomenting Sickness: Nocebo Priming of Residents about Expected Wind Turbine Health Harms

    PubMed Central

    Chapman, Simon; Joshi, Ketan; Fry, Luke

    2014-01-01

    A nocebo effect hypothesis has been proposed to explain variations in where small minorities of exposed residents complain about noise and health effects said to be caused by wind farm turbines. The hypothesis requires that those complaining have been exposed to negative, potentially frightening information about the impact of proposed wind farms on nearby residents, and that this information conditions both expectations about future health impacts or the etiology of current health problems where wind farms are already operational. This hypothesis has been confirmed experimentally under laboratory conditions, but case studies of how this process can operate in local communities are lacking. In this paper, we present a case study of the apparent impact of an anti-wind farm public meeting on the generation of negative news media and the subsequent expression of concerns about anticipated health and noise impacts to a planning authority approval hearing in Victoria, Australia. We present a content analysis of the negative claims disseminated about health and noise in the news media and available on the internet prior to the hearing, and another content analysis of all submissions made to the planning authority by those opposing the development application. PMID:25566521

  10. Awareness and acceptance of human papillomavirus vaccination among health sciences students in Malaysia.

    PubMed

    Rajiah, Kingston; Maharajan, Mari Kannan; Chin, Nang Sue; Num, Kelly Sze Fang

    2015-12-01

    The major cause of cervical cancer is human papillomavirus (HPV) for which vaccination is available. The success HPV vaccination programme largely depend on the degree of knowledge of the healthcare providers who can recommend to the public. Health sciences students as future healthcare providers play a major role in HPV vaccination initiatives. The objective of this study was to evaluate the knowledge, attitude, practice and to find out the willingness to pay for HPV vaccination among the health sciences students in a private university. The cross-sectional study was conducted among the university students studying health sciences program using a validated questionnaire to measure their awareness and acceptance of HPV vaccination. The students demonstrated moderate knowledge about HPV infection and vaccination with mean knowledge scores of 9.3 out of 17. Students were showing positive attitude towards HPV vaccination with mean scores of 3.80 out of 5. However, low HPV vaccination uptake rate was reported among the students. Most of the students were willing to recommend HPV vaccine. The participants felt that the cost is the major barrier towards HPV vaccination and they felt the government should cover the cost of vaccination for all. The results of this study may be helpful in establishing educational policies on cervical cancer-related topics in the universities. PMID:26645041

  11. Factors Associated with Acceptability of HIV Self-Testing Among Health Care Workers in Kenya

    PubMed Central

    Kalibala, Samuel; Tun, Waimar; Cherutich, Peter; Nganga, Anne; Oweya, Erick; Oluoch, Patricia

    2016-01-01

    Health care workers (HCWs) in sub-Saharan Africa are at a high risk of HIV infection from both sexual and occupational exposures. However, many do not seek HIV testing. This paper examines the acceptability of an unsupervised facility-based HIV self-testing (HIV-ST) intervention among HCWs and their partners and factors associated with uptake of HIVST among HCWs. HCWs in seven large Kenyan hospitals were invited to participate in pre-HIVST information sessions during which they were offered HIVST kits to take home for self-testing. A post-intervention survey was conducted among 765 HCWs. Forty-one percent attended the information session; of those, 89 % took the HIVST kits and of those, 85 % self-tested. Thirty-four percent of surveyed HCWs used the HIVST to test themselves. Of those who took the HIVST kit and had partners, 73 % gave the kit to their partner and 86 % of them indicated their partner self-tested. Factors positively associated with use of the HIVST on self were being female, being single, and being a HCW from Homa Bay Hospital (located in a high HIV prevalence area). HIVST is acceptable to HCWs and their partners. However, strategies are needed to increase HCWs attendance at pre-implementation information sessions. PMID:24974123

  12. Wind turbines and health: An examination of a proposed case definition.

    PubMed

    McCunney, Robert J; Morfeld, Peter; Colby, W David; Mundt, Kenneth A

    2015-01-01

    Renewable energy demands have increased the need for new wind farms. In turn, concerns have been raised about potential adverse health effects on nearby residents. A case definition has been proposed to diagnose "Adverse Health Effects in the Environs of Industrial Wind Turbines" (AHE/IWT); initially in 2011 and then with an update in 2014. The authors invited commentary and in turn, we assessed its scientific merits by quantitatively evaluating its proposed application. We used binomial coefficients to quantitatively assess the potential of obtaining a diagnosis of AHE/IWT. We also reviewed the methodology and process of the development of the case definition by contrasting it with guidelines on case definition criteria of the USA Institute of Medicine. The case definition allows at least 3,264 and up to 400,000 possibilities for meeting second- and third-order criteria, once the limited first-order criteria are met. IOM guidelines for clinical case definitions were not followed. The case definition has virtually no specificity and lacks scientific support from peer-reviewed literature. If applied as proposed, its application will lead to substantial potential for false-positive assessments and missed diagnoses. Virtually any new illness that develops or any prevalent illness that worsens after the installation of wind turbines within 10 km of a residence could be considered AHE/IWT if the patient feels better away from home. The use of this case definition in the absence of a thorough medical evaluation with appropriate diagnostic studies poses risks to patients in that treatable disorders would be overlooked. The case definition has significant potential to mislead patients and its use cannot be recommended for application in any health-care or decision-making setting. PMID:26168947

  13. Under what conditions is euthanasia acceptable to lay people and health professionals?

    PubMed

    Teisseyre, Nathalie; Mullet, Etienne; Sorum, Paul Clay

    2005-01-01

    Euthanasia is legal only in the Netherlands and Belgium, but it is on occasion performed by physicians elsewhere. We recruited in France two convenience samples of 221 lay people and of 189 professionals (36 physicians, 92 nurses, 48 nurse's aides, and 13 psychologists) and asked them how acceptable it would be for a patient's physician to perform euthanasia in each of 72 scenarios. The scenarios were all combinations of three levels of the patient's life expectancy (3 days, 10 days, or 1 month), four levels of the patient's request for euthanasia (no request, unable to formulate a request because in a coma, some form of request, repeated formal requests), three of the family's attitude (do not uselessly prolong care, no opinion, try to keep the patient alive to the very end), and two of the patient's willingness to undergo organ donation (willing or not willing). We found that most lay people and health care professionals structure the factors in the patient scenarios in the same way: they assign most importance to the extent of requests for euthanasia by the patient and least importance (the lay people) or none (the health professionals) to the patient's willingness to donate organs. They also integrate the information from the different factors in the same way: the factors of patient request, patient life expectancy, and (for the lay people) organ donation are combined additively, and the family's attitude toward prolonging care interacts with patient request (playing a larger role when the patient can make no request). Thus we demonstrate a common cognitive foundation for future discussions, at the levels of both clinical care and public policy, of the conditions under which physician-performed euthanasia might be acceptable. PMID:15522491

  14. Toward a Case Definition of Adverse Health Effects in the Environs of Industrial Wind Turbines: Facilitating a Clinical Diagnosis

    ERIC Educational Resources Information Center

    McMurtry, Robert Y.

    2011-01-01

    Internationally, there are reports of adverse health effects (AHE) in the environs of industrial wind turbines (IWT). There was multidisciplinary confirmation of the key characteristics of the AHE at the first international symposium on AHE/IWT. The symptoms being reported are consistent internationally and are characterized by crossover findings…

  15. Validation of the French version of the Acceptability E-scale (AES) for mental E-health systems.

    PubMed

    Micoulaud-Franchi, Jean-Arthur; Sauteraud, Alain; Olive, Jérôme; Sagaspe, Patricia; Bioulac, Stéphanie; Philip, Pierre

    2016-03-30

    Despite the increasing use of E-health systems for mental-health organizations, there is a lack of psychometric tools to evaluate their acceptability by patients with mental disorders. Thus, this study aimed to translate and validate a French version of the Acceptability E-scale (AES), a 6-item self-reported questionnaire that evaluates the extent to which patients find E-health systems acceptable. A forward-backward translation of the AES was performed. The psychometric properties of the French AES version, with construct validity, internal structural validity and external validity (Pearson's coefficient between AES scores and depression symptoms on the Beck Depression Inventory II) were analyzed. In a sample of 178 patients (mean age=46.51 years, SD=12.91 years), the validation process revealed satisfactory psychometric properties: factor analysis revealed two factors: "Satisfaction" (3 items) and "Usability" (3 items) and Cronbach's alpha was 0.7. No significant relation was found between AES scores and depression symptoms. The French version of the AES revealed a two-factor scale that differs from the original version. In line with the importance of acceptability in mental health and with a view to E-health systems for patients with mental disorders, the use of the AES in psychiatry may provide important information on acceptability (i.e., satisfaction and usability). PMID:26809367

  16. Turbine rotor disk health monitoring assessment based on sensor technology and spin tests data.

    PubMed

    Abdul-Aziz, Ali; Woike, Mark

    2013-01-01

    The paper focuses on presenting data obtained from spin test experiments of a turbine engine like rotor disk and assessing their correlation to the development of a structural health monitoring and fault detection system. The data were obtained under various operating conditions such as the rotor disk being artificially induced with and without a notch and rotated at a rotational speed of up to 10,000 rpm under balanced and imbalanced state. The data collected included blade tip clearance, blade tip timing measurements, and shaft displacements. Two different sensor technologies were employed in the testing: microwave and capacitive sensors, respectively. The experimental tests were conducted at the NASA Glenn Research Center's Rotordynamics Laboratory using a high precision spin system. Disk flaw observations and related assessments from the collected data for both sensors are reported and discussed. PMID:23844396

  17. Turbine Rotor Disk Health Monitoring Assessment Based on Sensor Technology and Spin Tests Data

    PubMed Central

    2013-01-01

    The paper focuses on presenting data obtained from spin test experiments of a turbine engine like rotor disk and assessing their correlation to the development of a structural health monitoring and fault detection system. The data were obtained under various operating conditions such as the rotor disk being artificially induced with and without a notch and rotated at a rotational speed of up to 10,000 rpm under balanced and imbalanced state. The data collected included blade tip clearance, blade tip timing measurements, and shaft displacements. Two different sensor technologies were employed in the testing: microwave and capacitive sensors, respectively. The experimental tests were conducted at the NASA Glenn Research Center's Rotordynamics Laboratory using a high precision spin system. Disk flaw observations and related assessments from the collected data for both sensors are reported and discussed. PMID:23844396

  18. Health Promotion Text Messaging Preferences and Acceptability Among the Medically Underserved.

    PubMed

    Albright, Karen; Krantz, Mori J; Backlund Jarquín, Paige; DeAlleaume, Lauren; Coronel-Mockler, Stephanie; Estacio, Raymond O

    2015-07-01

    The Colorado Healthy Heart Solutions program uses community health workers to provide health promotion and navigation services for participants in medically underserved, predominantly rural areas who are at risk for developing cardiovascular disease. A text messaging program designed to increase participant engagement and adherence to lifestyle changes was pilot tested with English- and Spanish-speaking participants. Preimplementation focus groups with participants informed the development of text messages that were used in a 6-week pilot program. Postimplementation focus groups and interviews then evaluated the pilot program. Participants reported a preference for concise messages received once daily and for positive messages suggesting specific actions that could be feasibly accomplished within the course of the day. Participants also consistently reported the desire for clarity in message delivery and content, indicating that the source of the messages should be easy to recognize, messages should state clearly when participants were expected to respond to the messages, and any responses should be acknowledged. Links to other websites or resources were generally viewed as trustworthy and acceptable, but were preferred for supplementary material only. These results may inform the development of future chronic disease management programs in underserved areas or augment existing programs using text messaging reinforcement. PMID:25586133

  19. Cervical Cancer Screening Program by Visual Inspection: Acceptability and Feasibility in Health Insurance Companies

    PubMed Central

    Horo, Apollinaire G.; Didi-Kouko Coulibaly, Judith; Koffi, Abdoul; Tchounga, Boris; Seni, Konan; Aka, Kacou Edèle; Kone, Mamourou

    2015-01-01

    Objective. To assess willingness to participate and diagnostic accuracy of visual inspection for early detection of cervical neoplasia among women in a health insurance company. Patients and Method. Cervical cancer screening was systematically proposed to 800 women after consecutive information and awareness sessions. The screening method was visual inspection with acetic acid (VIA) or Lugol's iodine (VILI). Results. Among the 800 identified women, 640 (82%) have accepted the screening, their mean age was 39 years, and 12.0% of them were involved in a polygamist couple. 28.2% of women had prior cervical screening. VIA has been detected positive in 5.9% of women versus 8.6% for VILI. The sensitivity was 72.9% and specificity was 95.2% for VIA versus 71.2% and 97.3% for VILI respectively. The histological examination highlighted a nonspecific chronic cervicitis in 4.6%, CIN1 lesions in 5.91%, and CIN2/3 in 1.2% of the cases. Conclusion. Cervical cancer screening by visual inspection showed appropriate diagnostic accuracy when used to detect early cervical lesions. It is a simple and easy to perform method that could be introduced progressively in the health insurance policy while waiting for a national screening program. PMID:26167178

  20. [Active health promotion among the aged in a rural region. Participants, acceptance, and implementation].

    PubMed

    Hofreuter-Gätgens, K; Mnich, E; Thomas, D; Salomon, T; von dem Knesebeck, O

    2011-08-01

    The program "active health promotion in old age" focuses on persons aged 60 years and older who are not in need of care and are living independently without cognitive impairment. The objective of the intervention is to improve physical activity, healthy nutrition, and the integration of older people into network structures. The intervention was successfully conducted in an urban setting and has now been transferred to a rural area in southwestern Germany (Baden-Wuerttemberg). It was offered to statutory health insured people of Baden-Wuerttemberg within an integrated care program and was free of charge. This article reports the results of the process evaluation. For data collection, participants were interviewed using a standardized questionnaire. Semistructured interviews were conducted with the intervention team and involved general practitioners. In addition, secondary data were used to analyze selection bias between participants and nonparticipants. Although the rural area has a major impact on recruitment, access, and factors of implementation, results demonstrate that the intervention is highly accepted by participants. Moreover, structural conditions (e.g., fitness clubs, exercise classes) are essential for a successful transfer. PMID:21800241

  1. Patients’ Acceptance towards a Web-Based Personal Health Record System: An Empirical Study in Taiwan

    PubMed Central

    Liu, Chung-Feng; Tsai, Yung-Chieh; Jang, Fong-Lin

    2013-01-01

    The health care sector has become increasingly interested in developing personal health record (PHR) systems as an Internet-based telehealthcare implementation to improve the quality and decrease the cost of care. However, the factors that influence patients’ intention to use PHR systems remain unclear. Based on physicians’ therapeutic expertise, we implemented a web-based infertile PHR system and proposed an extended Technology Acceptance Model (TAM) that integrates the physician-patient relationship (PPR) construct into TAM’s original perceived ease of use (PEOU) and perceived usefulness (PU) constructs to explore which factors will influence the behavioral intentions (BI) of infertile patients to use the PHR. From ninety participants from a medical center, 50 valid responses to a self-rating questionnaire were collected, yielding a response rate of 55.56%. The partial least squares (PLS) technique was used to assess the causal relationships that were hypothesized in the extended model. The results indicate that infertile patients expressed a moderately high intention to use the PHR system. The PPR and PU of patients had significant effects on their BI to use PHR, whereas the PEOU indirectly affected the patients’ BI through the PU. This investigation confirms that PPR can have a critical role in shaping patients’ perceptions of the use of healthcare information technologies. Hence, we suggest that hospitals should promote the potential usefulness of PHR and improve the quality of the physician-patient relationship to increase patients’ intention of using PHR. PMID:24142185

  2. Acceptance of health technology assessment submissions with incremental cost-effectiveness ratios above the cost-effectiveness threshold

    PubMed Central

    Griffiths, Elizabeth A; Hendrich, Janek K; Stoddart, Samuel DR; Walsh, Sean CM

    2015-01-01

    Objectives In health technology assessment (HTA) agencies where cost-effectiveness plays a role in decision-making, an incremental cost-effectiveness ratio (ICER) threshold is often used to inform reimbursement decisions. The acceptance of submissions with ICERs higher than the threshold was assessed across different agencies and across indications, in order to inform future reimbursement submissions. Methods All HTA appraisals from May 2000 to May 2014 from National Institute for Health and Care Excellence (NICE), Scottish Medicines Consortium (SMC), Pharmaceutical Benefits Advisory Committee (PBAC), and Canadian Agency for Drugs and Technologies in Health (CADTH) were assessed. Multiple technology appraisals, resubmissions, vaccination programs, and requests for advice were excluded. Submissions not reporting an ICER, or for which an ICER could not be determined were also excluded. The remaining appraisals were reviewed, and the submitted ICER, recommendation, and reasoning behind the recommendation were extracted. Results NICE recommended the highest proportion of submissions with ICERs higher than the threshold (34% accepted without restrictions; 20% with restrictions), followed by PBAC (16% accepted without restrictions; 4% with restrictions), SMC (11% accepted without restrictions; 14% accepted with restrictions), and CADTH (0% accepted without restrictions; 26% with restrictions). Overall, the majority of higher-than-threshold ICER submissions were classified into the “malignant disease and immunosuppression” therapeutic category; however, there was no notable variation in acceptance rates by disease area. Reasons for accepting submissions reporting ICERs above the threshold included high clinical benefit over the standard of care, and addressing an unmet therapeutic need. Conclusion Acceptance of submissions with higher-than-threshold ICERs varied by HTA agency and was not significantly influenced by disease category. Such submissions must be

  3. Korean American parental depressive symptoms and children's mental health: the mediating role of parental acceptance-rejection.

    PubMed

    Kim, Eunjung

    2013-01-01

    This study explored the mediating role of parental acceptance-rejection in the relationship between parental depressive symptoms and children's mental health. Self-report data were gathered from 95 mothers and 91 fathers of children (ages 5-10 years) in Korean American families. For mothers and fathers, the relationship between parental depressive symptoms and child psychosocial problems was mediated by parenting behaviors, with parental rejection being a much stronger mediator than parental acceptance. For fathers, the relationship between fathers' depressive symptoms and child social competence was mediated by parenting, with fathers' parental rejection being a slightly stronger mediator than fathers' parental acceptance. PMID:22608945

  4. Acceptability of Financial Incentives for Health Behaviours: A Discrete Choice Experiment

    PubMed Central

    Giles, Emma L.; Becker, Frauke; Ternent, Laura; Sniehotta, Falko F.; McColl, Elaine

    2016-01-01

    Background Healthy behaviours are important determinants of health and disease, but many people find it difficult to perform these behaviours. Systematic reviews support the use of personal financial incentives to encourage healthy behaviours. There is concern that financial incentives may be unacceptable to the public, those delivering services and policymakers, but this has been poorly studied. Without widespread acceptability, financial incentives are unlikely to be widely implemented. We sought to answer two questions: what are the relative preferences of UK adults for attributes of financial incentives for healthy behaviours? Do preferences vary according to the respondents’ socio-demographic characteristics? Methods We conducted an online discrete choice experiment. Participants were adult members of a market research panel living in the UK selected using quota sampling. Preferences were examined for financial incentives for: smoking cessation, regular physical activity, attendance for vaccination, and attendance for screening. Attributes of interest (and their levels) were: type of incentive (none, cash, shopping vouchers or lottery tickets); value of incentive (a continuous variable); schedule of incentive (same value each week, or value increases as behaviour change is sustained); other information provided (none, written information, face-to-face discussion, or both); and recipients (all eligible individuals, people living in low-income households, or pregnant women). Results Cash or shopping voucher incentives were preferred as much as, or more than, no incentive in all cases. Lower value incentives and those offered to all eligible individuals were preferred. Preferences for additional information provided alongside incentives varied between behaviours. Younger participants and men were more likely to prefer incentives. There were no clear differences in preference according to educational attainment. Conclusions Cash or shopping voucher

  5. Acceptance, Usability and Health Applications of Virtual Worlds by Older Adults: A Feasibility Study

    PubMed Central

    Winkler, Sandra L

    2016-01-01

    Background Virtual worlds allow users to communicate and interact across various environments, scenarios, and platforms. Virtual worlds present opportunities in health care to reduce the burden of illness and disability by supporting education, rehabilitation, self-management, and social networking. The application of virtual worlds to older adults who bear the burden and cost of health conditions associated with age has not been evaluated. Objective The aim of this study is to explore the usability, ease of use, and enjoyment of a virtual world by older adults, the types of virtual world activities that older adults may engage in, and the perceptions of older adults regarding the application of virtual worlds in health care. Methods This quasi-experimental pre-post design research was guided by the Technology Acceptance Model (TAM). Participants were recruited from a Lifelong Learning Institute (LLI) program at Nova Southeastern University. Participants attended four training sessions over a 5-week period in the Second Life (SL) virtual world. Subjects were surveyed before and after the training on perceived ease of use, attitudes towards technology, behavioral intention to use the system, facilitating conditions, effort expectancy, and self-efficacy. Results Older adults (N=19) completed the informed consent and attended the first training session, and 11 participants (58%, 11/19) completed the full training and the post survey. Completers (82%, 9/11) were more likely than non-completers (37%, 3/8) to consider themselves technologically savvy (P=.048), and to express confidence in being able to use the virtual world (100%, 11/11 vs 37%, 3/8; P=.002). All completers (100%, 11/11) perceived that SL has application in health behaviors and disease and reducing social isolation among people who are homebound. Of the completers, 10 (91%, 10/11) responded that they enjoyed learning how to use SL. Completers suggested that future trainings include more assistants and

  6. Wind turbine noise, annoyance and self‐reported health and well‐being in different living environments

    PubMed Central

    Pedersen, Eja

    2007-01-01

    Objectives To evaluate the prevalence of perception and annoyance due to wind turbine noise among people living near the turbines, and to study relations between noise and perception/annoyance, with focus on differences between living environments. Methods A cross‐sectional study was carried out in seven areas in Sweden across dissimilar terrain and different degrees of urbanisation. A postal questionnaire regarding living conditions including response to wind turbine noise was completed by 754 subjects. Outdoor A‐weighted sound pressure levels (SPLs) were calculated for each respondent. Perception and annoyance due to wind turbine noise in relation to SPLs was analysed with regard to dissimilarities between the areas. Results The odds of perceiving wind turbine noise increased with increasing SPL (OR 1.3; 95% CI 1.25 to 1.40). The odds of being annoyed by wind turbine noise also increased with increasing SPLs (OR 1.1; 95% CI 1.01 to 1.25). Perception and annoyance were associated with terrain and urbanisation: (1) a rural area increased the risk of perception and annoyance in comparison with a suburban area; and (2) in a rural setting, complex ground (hilly or rocky terrain) increased the risk compared with flat ground. Annoyance was associated with both objective and subjective factors of wind turbine visibility, and was further associated with lowered sleep quality and negative emotions. Conclusion There is a need to take the unique environment into account when planning a new wind farm so that adverse health effects are avoided. The influence of area‐related factors should also be considered in future community noise research. PMID:17332136

  7. Turbine engine disk rotor health monitoring assessment using spin tests data

    NASA Astrophysics Data System (ADS)

    Abdul-Aziz, Ali; Woike, Mark; Baaklini, George; Bodis, James R.

    2012-04-01

    Detecting rotating engine component malfunctions and structural anomalies is increasingly becoming a crucial key feature that will help boost safety and lower maintenance cost. However, achievement of such technology, which can be referred to as a health monitoring remains somewhat challenging to implement. This is mostly due to presence of scattered loading conditions, crack sizes, component geometry and material properties that hinders the simplicity of imposing such application. Different approaches are being considered to assist in developing other means of health monitoring or nondestructive techniques to detect hidden flaws and mini cracks before any catastrophic events occur. These methods extend further to assess material discontinuities and other defects that have matured to the level where a failure is very likely. This paper is focused on presenting data obtained from spin test experiments of a turbine engine like rotor disk and their correlation to the development of a structural health monitoring and fault detection system. The data collected includes blade tip clearance, blade tip timing measurements and shaft displacements. The experimental results are collected at rotational speeds up to 10,000 Rpm and tests are conducted at the NASA Glenn Research Center's Rotordynamics Laboratory via a high precision spin system. Additionally, this study offers a closer glance at a selective online evaluation of a rotating disk using advanced capacitive, microwave and eddy current sensor technology.

  8. Turbine Engine Disk Rotor Health Monitoring Assessment Using Spin Tests Data

    NASA Technical Reports Server (NTRS)

    Abdul-Aziz, Ali; Woike, Mark; Baalini, George; Bodis, James R.

    2012-01-01

    Detecting rotating engine component malfunctions and structural anomalies is increasingly becoming a crucial key feature that will help boost safety and lower maintenance cost. However, achievement of such technology, which can be referred to as a health monitoring remains somewhat challenging to implement. This is mostly due to presence of scattered loading conditions, crack sizes, component geometry and material properties that hinders the simplicity of imposing such application. Different approaches are being considered to assist in developing other means of health monitoring or nondestructive techniques to detect hidden flaws and mini cracks before any catastrophic events occur. These methods extend further to assess material discontinuities and other defects that have matured to the level where a failure is very likely. This paper is focused on presenting data obtained from spin test experiments of a turbine engine like rotor disk and their correlation to the development of a structural health monitoring and fault detection system. The data collected includes blade tip clearance, blade tip timing measurements and shaft displacements. The experimental results are collected at rotational speeds up to 10,000 Rpm and tests are conducted at the NASA Glenn Research Center s Rotordynamics Laboratory via a high precision spin system. Additionally, this study offers a closer glance at a selective online evaluation of a rotating disk using advanced capacitive, microwave and eddy current sensor technology.

  9. Tobacco industry sponsorship of community-based public health initiatives: why AIDS and domestic violence organizations accept or refuse funds.

    PubMed

    Stone, Meg; Siegel, Michael B

    2004-01-01

    The objective of this study was to understand the reasons community-based public health organizations in the United States accept or refuse tobacco industry sponsorship. A formative pilot study involving 13 interviews with representatives of AIDS and Domestic Violence organizations in California or the Northeast was used. Semistructured interviews were conducted with leaders and fund-raisers working at AIDS and domestic violence organizations that either accepted grants from the tobacco industry or explicitly refused tobacco corporate support. Respondents that accepted grants did so because they believed that the tangible benefits of additional capacity to serve their constituents outweighed the minimal effect they believed refusing funds could have on tobacco control and prevention. Organizations that refused sponsorship either saw tobacco prevention as part of their mission of promoting overall health or social justice, or expressed concern about public association with the tobacco industry. Public health responses to this phenomenon are most effective when they are informed by the realities facing nonprofit leaders as they grapple with the question of whether to accept industry funds. Further research is needed to determine whether accepting sponsorship results in a change in public opinion about tobacco control. Possible interventions include creating positive publicity for organizations that refuse tobacco industry philanthropy. PMID:15643374

  10. Feasibility, acceptability, and initial efficacy of an online sexual health promotion program for LGBT youth: the Queer Sex Ed intervention.

    PubMed

    Mustanski, Brian; Greene, George J; Ryan, Daniel; Whitton, Sarah W

    2015-01-01

    Lesbian, gay, bisexual, and transgender (LGBT) youth experience multiple sexual health inequities driven, in part, by deficits in parental and peer support, school-based sex education programs, and community services. Research suggests that the Internet may be an important resource in the development of sexual health among LGBT youth. We examined the feasibility of recruiting youth in same-sex relationships into an online sexual health intervention, evaluated intervention acceptability, and obtained initial estimates of intervention efficacy. LGBT youth (16 to 20 years old) completed Queer Sex Ed (QSE), an online, multimedia sexual health intervention consisting of five modules. The final sample (N = 202) completed the pretest, intervention, and posttest assessments. The primary study outcomes were sexual orientation identity and self-acceptance (e.g., coming-out self-efficacy), sexual health knowledge (e.g., sexual functioning), relationship variables (e.g., communication skills), and safer sex (e.g., sexual assertiveness). Analyses indicated that 15 of the 17 outcomes were found to be significant (p < .05). Effect sizes ranged from small for sexual orientation (e.g., internalized homophobia) and relationship variables (e.g., communication skills) to moderate for safer sex (e.g., contraceptive knowledge) outcomes. This study demonstrated the feasibility, acceptability, and initial efficacy of QSE, an innovative online comprehensive sexual health program for LGBT youth. PMID:24588408

  11. Acceptability of Interventions Delivered Online and Through Mobile Phones for People Who Experience Severe Mental Health Problems: A Systematic Review

    PubMed Central

    Lobban, Fiona; Emsley, Richard; Bucci, Sandra

    2016-01-01

    Background Psychological interventions are recommended for people with severe mental health problems (SMI). However, barriers exist in the provision of these services and access is limited. Therefore, researchers are beginning to develop and deliver interventions online and via mobile phones. Previous research has indicated that interventions delivered in this format are acceptable for people with SMI. However, a comprehensive systematic review is needed to investigate the acceptability of online and mobile phone-delivered interventions for SMI in depth. Objective This systematic review aimed to 1) identify the hypothetical acceptability (acceptability prior to or without the delivery of an intervention) and actual acceptability (acceptability where an intervention was delivered) of online and mobile phone-delivered interventions for SMI, 2) investigate the impact of factors such as demographic and clinical characteristics on acceptability, and 3) identify common participant views in qualitative studies that pinpoint factors influencing acceptability. Methods We conducted a systematic search of the databases PubMed, Embase, PsycINFO, CINAHL, and Web of Science in April 2015, which yielded a total of 8017 search results, with 49 studies meeting the full inclusion criteria. Studies were included if they measured acceptability through participant views, module completion rates, or intervention use. Studies delivering interventions were included if the delivery method was online or via mobile phones. Results The hypothetical acceptability of online and mobile phone-delivered interventions for SMI was relatively low, while actual acceptability tended to be high. Hypothetical acceptability was higher for interventions delivered via text messages than by emails. The majority of studies that assessed the impact of demographic characteristics on acceptability reported no significant relationships between the two. Additionally, actual acceptability was higher when

  12. Wind turbines and health: An examination of a proposed case definition

    PubMed Central

    McCunney, Robert J.; Morfeld, Peter; Colby, W. David; Mundt, Kenneth A.

    2015-01-01

    Renewable energy demands have increased the need for new wind farms. In turn, concerns have been raised about potential adverse health effects on nearby residents. A case definition has been proposed to diagnose “Adverse Health Effects in the Environs of Industrial Wind Turbines” (AHE/IWT); initially in 2011 and then with an update in 2014. The authors invited commentary and in turn, we assessed its scientific merits by quantitatively evaluating its proposed application. We used binomial coefficients to quantitatively assess the potential of obtaining a diagnosis of AHE/IWT. We also reviewed the methodology and process of the development of the case definition by contrasting it with guidelines on case definition criteria of the USA Institute of Medicine. The case definition allows at least 3,264 and up to 400,000 possibilities for meeting second- and third-order criteria, once the limited first-order criteria are met. IOM guidelines for clinical case definitions were not followed. The case definition has virtually no specificity and lacks scientific support from peer-reviewed literature. If applied as proposed, its application will lead to substantial potential for false-positive assessments and missed diagnoses. Virtually any new illness that develops or any prevalent illness that worsens after the installation of wind turbines within 10 km of a residence could be considered AHE/IWT if the patient feels better away from home. The use of this case definition in the absence of a thorough medical evaluation with appropriate diagnostic studies poses risks to patients in that treatable disorders would be overlooked. The case definition has significant potential to mislead patients and its use cannot be recommended for application in any health-care or decision-making setting. PMID:26168947

  13. Remote Monitoring of the Structural Health of Hydrokinetic Composite Turbine Blades

    SciTech Connect

    J.L. Rovey K. Chandrashekhara

    2012-09-21

    A health monitoring approach is investigated for hydrokinetic turbine blade applications. In-service monitoring is critical due to the difficult environment for blade inspection and the cost of inspection downtime. Composite blade designs have advantages that include long life in marine environments and great control over mechanical properties. Experimental strain characteristics are determined for static loads and free-vibration loads. These experiments are designed to simulate the dynamic characteristics of hydrokinetic turbine blades. Carbon/epoxy symmetric composite laminates are manufactured using an autoclave process. Four-layer composite beams, eight-layer composite beams, and two-dimensional eight-layer composite blades are instrumented for strain. Experimental results for strain measurements from electrical resistance gages are validated with theoretical characteristics obtained from in-house finite-element analysis for all sample cases. These preliminary tests on the composite samples show good correlation between experimental and finite-element strain results. A health monitoring system is proposed in which damage to a composite structure, e.g. delamination and fiber breakage, causes changes in the strain signature behavior. The system is based on embedded strain sensors and embedded motes in which strain information is demodulated for wireless transmission. In-service monitoring is critical due to the difficult environment for blade inspection and the cost of inspection downtime. Composite blade designs provide a medium for embedding sensors into the blades for in-situ health monitoring. The major challenge with in-situ health monitoring is transmission of sensor signals from the remote rotating reference frame of the blade to the system monitoring station. In the presented work, a novel system for relaying in-situ blade health measurements in hydrokinetic systems is described and demonstrated. An ultrasonic communication system is used to transmit

  14. Measurement of Self-Monitoring Web Technology Acceptance and Use in an e-Health Weight-Loss Trial

    PubMed Central

    Xiao, Lan; Blonstein, Andrea C.

    2013-01-01

    Abstract Background: Research on technology acceptance and use in e-health weight-loss interventions is limited. Using data from a randomized controlled trial of two e-health interventions, we evaluated the acceptance and use of a self-monitoring Web site for weight loss. Materials and Methods: We examined eight theoretical constructs about technology acceptance using adapted 5-point Likert scales and the association of measured Web site usage and weight loss. Results: All scales had high internal consistency (Cronbach's alpha=0.74–0.97) in both interventions and at 3 and 15 months (end of intensive and maintenance intervention, respectively). From 3 to 15 months mean scores changed unfavorably for two constructs (compatibility and behavioral intention) among coach-led intervention participants, who received ongoing feedback on their self-monitoring entries. Among self-directed intervention participants, who received minimal coach support, mean scores changed unfavorably for five constructs (usefulness, ease of use, concern, compatibility, and behavioral intention). At 3 months, usefulness, ease of use, effect, compatibility, and behavioral intention in the coach-led group (Pearson r=0.33–0.5) and usefulness and affect in the self-directed group (r=0.43–0.46) were significantly correlated with Web site usage, which was correlated with weight loss (β=−0.02, p≤0.001 for both interventions). From 3 to 15 months, mean score changes for usefulness and behavioral intention correlated significantly with Web site usage in the coach-led group. Conclusions: The adapted acceptance measures showed acceptable psychometric properties and significant associations with actual Web site use, which correlated with weight loss. Better understanding of technology acceptance and use in e-health weight-loss interventions may improve participant adherence and outcome. PMID:23952787

  15. Primary Care Patients with Depression Are Less Accepting of Treatment Than Those Seen by Mental Health Specialists

    PubMed Central

    Van Voorhees, Benjamin W; Cooper, Lisa A; Rost, Kathryn M; Nutting, Paul; Rubenstein, Lisa V; Meredith, Lisa; Wang, Nae-Yuh; Ford, Daniel E

    2003-01-01

    OBJECTIVE This study examined whether depressed patients treated exclusively in primary care report less need for care and less acceptability of treatment options than those depressed patients treated in the specialty mental health setting after up to 6 months of treatment. DESIGN Cross-sectional study. SETTING Forty-five community primary care practices. PARTICIPANTS A total of 881 persons with major depression who had received mental health services in the previous 6 months and who enrolled in 3 of the 4 Quality Improvement for Depression Collaboration Studies. MEASUREMENTS AND RESULTS Patients were categorized into 1 of 2 groups: 1) having received mental health services exclusively from a primary care provider (45%), or 2) having received any services from a mental health specialist (55%) in the previous 6 months. Compared with patients who received care from mental health specialists, patients who received mental health services exclusively from primary care providers had 2.7-fold the odds (95% confidence interval [CI], 1.6 to 4.4) of reporting that no treatment was definitely acceptable and had 2.4-fold the odds (95% CI, 1.5 to 3.9) of reporting that evidence-based treatment options (antidepressant medication) were definitely not acceptable. These results were adjusted for demographic, social/behavioral, depression severity, and economic factors using multiple logistic regression analysis. CONCLUSIONS Patients with depression treated exclusively by primary care providers have attitudes and beliefs more averse to care than those seen by mental health specialists. These differences in attitudes and beliefs may contribute to lower quality depression care observed in comparisons of primary care and specialty mental health providers. PMID:14687257

  16. The acceptability, feasibility and impact of a lay health counsellor delivered health promoting schools programme in India: a case study evaluation

    PubMed Central

    2012-01-01

    Background Studies in resource-limited settings have shown that there are constraints to the use of teachers, peers or health professionals to deliver school health promotion interventions. School health programmes delivered by trained lay health counsellors could offer a cost-effective alternative. This paper presents a case study of a multi-component school health promotion intervention in India that was delivered by lay school health counsellors, who possessed neither formal educational nor health provider qualifications. Methods The intervention was based on the WHO’s Health Promoting Schools framework, and included health screening camps; an anonymous letter box for student questions and complaints; classroom-based life skills training; and, individual psycho-social and academic counselling for students. The intervention was delivered by a lay school health counsellor who had attained a minimum of a high school education. The counsellor was trained over four weeks and received structured supervision from health professionals working for the implementing NGO. The evaluation design was a mixed methods case study. Quantitative process indicators were collected to assess the extent to which the programme was delivered as planned (feasibility), the uptake of services (acceptability), and the number of students who received corrective health treatment (evidence of impact). Semi-structured interviews were conducted over two years with 108 stakeholders, and were analysed to identify barriers and facilitators for the programme (feasibility), evaluate acceptability, and gather evidence of positive or negative effects of the programme. Results Feasibility was established by the high reported coverage of all the targeted activities by the school health counsellor. Acceptability was indicated by a growing number of submissions to the students’ anonymous letter-box; more students self-referring for counselling services over time; and, the perceived need for the

  17. Predicting Noise From Wind Turbines

    NASA Technical Reports Server (NTRS)

    Grosveld, Ferdinand W.

    1990-01-01

    Computer program WINDY predicts broadband noise spectra of horizontal-axis wind-turbine generators. Enables adequate assessment of impact of broadband wind-turbine noise. Effects of turbulence, trailing-edge wakes, and bluntness taken into account. Program has practical application in design and siting of wind-turbine machines acceptable to community. Written in GW-Basic.

  18. Acceptance of Internet-Based Health Care Services Among Households in Poland: Secondary Analysis of a Population-Based Survey

    PubMed Central

    2012-01-01

    Background Polish society is benefiting from growing access to the Internet, but the use of advanced e-services is still limited. The provision of Internet-based health services depends not only on the penetration of the Internet into society, but also on the acceptance of this technology by potential users. Objective The main objective of this study was focused on the assessment of predictors of acceptance of Internet use for provision of health services (eg, sociodemographic status, the use of information technologies, and consumption of health care services) among households in Poland. Methods The study was based on a secondary analysis of the dataset from the 2011 Social Diagnosis survey (a biannual survey conducted since 2001 about economic and non-economic aspects of household and individual living conditions in Poland). Analysis of the questionnaire results focused on the situations of the households included in the study. The predictors for 2 outcome variables describing the acceptance of households for Internet use for provision of a full health care service, or at least access to information and download of required forms, were assessed using multivariate logistic regression. Results After excluding those households that would not consider the use of health care services or for which predictor variables assumed missing values, the final analyses were conducted on data from 8915 households. Acceptance of the use of the Internet for provision of full health care services in Polish households was significantly higher among households in urban locations with ≥ 200,000 inhabitants than among households in rural areas; it was also higher with salaried employment as the source of income than with self-employment in agriculture (odds ratio [OR] = 0.53, 95% CI 0.40 - 0.70), retirement pension (OR = 0.46, 95% CI 0.39 - 0.54), disability pension (OR = 0.48, 95% CI 0.34 - 0.68), or with several simultaneous income sources (OR = 0.66; 95% CI 0.57 - 0

  19. Can mHealth Improve Risk Assessment in Underserved Populations? Acceptability of a Breast Health Questionnaire App in Ethnically Diverse, Older, Low-Income Women

    PubMed Central

    Bravo, Carolina; O’Donoghue, Cristina; Kaplan, Celia P.; Luce, Judith; Ozanne, Elissa

    2014-01-01

    Background Use of mobile health (mHealth) tools has expanded rapidly but little research has been done on its acceptability by low-income, diverse, older patient populations. Objective To assess the attitudes of a diverse group of underserved women on the acceptability and usability of mHealth tools in a clinical setting using a breast health questionnaire application (app) at a public hospital mammography clinic. Methods Semi-structured interviews were conducted in a breast-imaging center of an urban safety net institution from July-August 2012. Interviews included pre- and post-questions. Women completed the Athena breast health questionnaire app on an iPad and were asked about their experience and ways to improve the tool. Results Fifteen women age 45–79 years from diverse ethnic and educational backgrounds were interviewed. The majority of women, 11 of 15, preferred the Athena app over a paper version and all the women thought the app was easy to use. Two Spanish-speaking Latinas preferred paper; and two women, with limited mobile phone use, did not have a preference. Many women indicated that it would be necessary to have staff available for instruction and assistance if the app were to be implemented. Conclusions mHealth tools are an acceptable, if not preferred, method of collecting health information for diverse, older, low-income women. Further studies are required to evaluate the reliability and accuracy of data collection using mHealth tools in underserved populations. mHealth tools should be explored as a novel way to engage diverse populations to improve clinical care and bridge gaps in health disparities. PMID:25705576

  20. Structural Health Monitoring challenges on the 10-MW offshore wind turbine model

    NASA Astrophysics Data System (ADS)

    Di Lorenzo, E.; Kosova, G.; Musella, U.; Manzato, S.; Peeters, B.; Marulo, F.; Desmet, W.

    2015-07-01

    The real-time structural damage detection on large slender structures has one of its main application on offshore Horizontal Axis Wind Turbines (HAWT). The renewable energy market is continuously pushing the wind turbine sizes and performances. This is the reason why nowadays offshore wind turbines concepts are going toward a 10 MW reference wind turbine model. The aim of the work is to perform operational analyses on the 10-MW reference wind turbine finite element model using an aeroelastic code in order to obtain long-time-low- cost simulations. The aeroelastic code allows simulating the damages in several ways: by reducing the edgewise/flapwise blades stiffness, by adding lumped masses or considering a progressive mass addiction (i.e. ice on the blades). The damage detection is then performed by means of Operational Modal Analysis (OMA) techniques. Virtual accelerometers are placed in order to simulate real measurements and to estimate the modal parameters. The feasibility of a robust damage detection on the model has been performed on the HAWT model in parked conditions. The situation is much more complicated in case of operating wind turbines because the time periodicity of the structure need to be taken into account. Several algorithms have been implemented and tested in the simulation environment. They are needed in order to carry on a damage detection simulation campaign and develop a feasible real-time damage detection method. In addition to these algorithms, harmonic removal tools are needed in order to dispose of the harmonics due to the rotation.

  1. Acceptance and Usage of Electronic Health Record Systems in Small Medical Practices

    ERIC Educational Resources Information Center

    Tannan, Ritu

    2012-01-01

    One of the objectives of the U.S. government has been the development of a nationwide health information infrastructure, including adoption and use of an electronic health records (EHR) system. However, a 2008 survey conducted by the National Center for Health Statistics indicated a 41.5% usage of the EHR system by physicians in office-based…

  2. Service User- and Carer-Reported Measures of Involvement in Mental Health Care Planning: Methodological Quality and Acceptability to Users

    PubMed Central

    Gibbons, Chris J.; Bee, Penny E.; Walker, Lauren; Price, Owen; Lovell, Karina

    2014-01-01

    Background: Increasing service user and carer involvement in mental health care planning is a key healthcare priority but one that is difficult to achieve in practice. To better understand and measure user and carer involvement, it is crucial to have measurement questionnaires that are both psychometrically robust and acceptable to the end user. Methods: We conducted a systematic review using the terms “care plan$,” “mental health,” “user perspective$,” and “user participation” and their linguistic variants as search terms. Databases were searched from inception to November 2012, with an update search at the end of September 2014. We included any articles that described the development, validation or use of a user and/or carer-reported outcome measures of involvement in mental health care planning. We assessed the psychometric quality of each instrument using the “Evaluating the Measurement of Patient-Reported Outcomes” (EMPRO) criteria. Acceptability of each instrument was assessed using novel criteria developed in consultation with a mental health service user and carer consultation group. Results: We identified eleven papers describing the use, development, and/or validation of nine user/carer-reported outcome measures. Psychometric properties were sparsely reported and the questionnaires met few service user/carer-nominated attributes for acceptability. Where reported, basic psychometric statistics were of good quality, indicating that some measures may perform well if subjected to more rigorous psychometric tests. The majority were deemed to be too long for use in practice. Discussion: Multiple instruments are available to measure user/carer involvement in mental health care planning but are either of poor quality or poorly described. Existing measures cannot be considered psychometrically robust by modern standards, and cannot currently be recommended for use. Our review has identified an important knowledge gap, and an urgent need to

  3. Perception of Influencing Factors on Acceptance of Mobile Health Monitoring Service: A Comparison between Users and Non-users

    PubMed Central

    Lee, Jaebeom

    2013-01-01

    Objectives To improve and promote mobile health monitoring services, this study investigated the perception of various factors influencing the acceptance of services between users and non-users. Methods This study drew 9 variables from studies related to mobile health monitoring services and the unified theory of acceptance and the use of technology model. A total of 219 samples were collected by a paper-based survey from users (n = 106) and non-users (n = 113). Analysis was carried out using a two-independent samples t-test. Results The findings indicate that users have a more positive perception of service benefits than non-users. Although there were difference between users and non-users, all respondents had a positive perception of the service benefits. After users used the service, they were less concerned about the risks involved with it. However, both users and non-users had a high negative perception of service risk. Users also had a more positive perception of intimacy and communication associated with the services than non-users. Both users and non-users had a high behavioral intention to use the services. Finally, this study observed that older subjects tended to recognize the higher value of the services. Conclusions This study provides insights to improve and invigorate mobile health monitoring services. This study also offers insights into how to increase the number of users of mobile health monitoring services in South Korea. PMID:24175115

  4. Health Extension Workers' and Mothers' Attitudes to Maternal Health Service Utilization and Acceptance in Adwa Woreda, Tigray Region, Ethiopia

    PubMed Central

    Jackson, Ruth; Tesfay, Fisaha Haile; Godefay, Hagos; Gebrehiwot, Tesfay Gebregzabher

    2016-01-01

    Background The maternal health system in Ethiopia links health posts in rural communities (kebeles) with district (woreda) health centres, and health centres with primary hospitals. At each health post two Health Extension Workers (HEWs) assist women with birth preparedness, complication readiness, and mobilize communities to facilitate timely referral to mid-level service providers. This study explored HEWs’ and mother’s attitudes to maternal health services in Adwa Woreda, Tigray Region. Methods In this qualitative study, we trained 16 HEWs to interview 45 women to gain a better understanding of the social context of maternal health related behaviours. Themes included barriers to health services; women’s social status and mobility; and women’s perceptions of skilled birth attendant’s care. All data were analyzed thematically. Findings There have been substantial efforts to improve maternal health and reduce maternal mortality in Adwa Woreda. Women identified barriers to healthcare including distance and lack of transportation due to geographical factors; the absence of many husbands due to off-woreda farming; traditional factors such as zwar (some pregnant women are afraid of meeting other pregnant women), and discouragement from mothers and mothers-in-law who delivered their children at home. Some women experienced disrespectful care at the hospital. Facilitators to skilled birth attendance included: identification of pregnant women through Women’s Development Groups (WDGs), and referral by ambulance to health facilities either before a woman’s Expected Due Date (EDD) or if labour started at home. Conclusion With the support of WDGs, HEWs have increased the rate of skilled birth attendance by calling ambulances to transfer women to health centres either before their EDD or when labour starts at home. These findings add to the growing body of evidence that health workers at the community level can work with women’s groups to improve maternal

  5. Health Care Providers: A Missing Link in Understanding Acceptability of the Female Condom

    ERIC Educational Resources Information Center

    Mantell, Joanne E.; West, Brooke S.; Sue, Kimberly; Hoffman, Susie; Exner, Theresa M.; Kelvin, Elizabeth; Stein, Zena A.

    2011-01-01

    Health care providers can play a key role in influencing clients to initiate and maintain use of the female condom, an underused method for HIV/STI and pregnancy prevention. In 2001-2002, based on semistructured interviews with 78 health care providers from four types of settings in New York City, we found that most providers had seen the female…

  6. A qualitative study of HPV vaccine acceptability among health workers, teachers, parents, female pupils, and religious leaders in northwest Tanzania

    PubMed Central

    Remes, Pieter; Selestine, Veronica; Changalucha, John; Ross, David A.; Wight, Daniel; de Sanjosé, Silvia; Kapiga, Saidi; Hayes, Richard J.; Watson-Jones, Deborah

    2012-01-01

    Background As human papillomavirus (HPV) vaccines become available in developing countries, acceptability studies can help to better understand potential barriers and facilitators of HPV vaccination and guide immunisation programs. Methods Prior to a cluster-randomised phase IV trial of HPV vaccination delivery strategies in Mwanza Region, Tanzania, qualitative research was conducted to assess attitudes and knowledge about cervical cancer and HPV, and acceptability of and potential barriers to HPV vaccination of Tanzanian primary schoolgirls. Semi-structured interviews (n = 31) and group discussions (n = 12) were conducted with a total of 169 respondents (parents, female pupils, teachers, health workers and religious leaders). Results While participants had heard of cancer in general, most respondents had no knowledge of cervical cancer, HPV, or HPV vaccines. Only health workers had heard of cervical cancer but very few knew its cause or had any awareness about HPV vaccines. After participants were provided with information about cervical cancer and HPV vaccination, the majority stated that they would support HPV vaccination of their daughter to protect them against cervical cancer. Opt-out consent for vaccination was considered acceptable. Most preferred age-based vaccination, saying this would target more girls before sexual debut than class-based vaccination. Potential side effects and infertility concerns were raised by 5/14 of participating male teachers. Discussion Reported acceptability of HPV vaccination amongst parents, teachers and other community members was high in this population. Respondents stressed the need to provide adequate information about the vaccine to parents, that also addresses side effects and infertility concerns. PMID:22732428

  7. Acceptability of meningococcal serogroup B vaccine among parents and health care workers in Italy: a survey.

    PubMed

    Mameli, Chiara; Faccini, Marino; Mazzali, Cristina; Picca, Marina; Colella, Giacomo; Duca, Pier Giorgio; Zuccotti, Gian Vincenzo

    2014-01-01

    A new meningococcal serogroup B vaccine (4 CMenB) has recently been licensed. This study assessed the acceptability of 4 CMenB vaccine among parents and healthcare workers (HCWs). From May to July 2013 in Milan, Italy, self-administered questionnaires were distributed to 2050 parents of infants presenting at immunization clinics for the mandatory hexavalent vaccination and submitted to 350 HCWs involved in immunization practices. 1842 parents (89.1%) responded to the survey; 64.4% of parents wanted their child to receive the 4 CMenB vaccine and 5.1% would not vaccinate their children. Multivariate analysis showed that recognition of the severity of meningitis [a life threatening vs a mild or unthreatening disease (Odds ratio (OR): 2.3; confidence interval (CI): 1.4-3.6], awareness of vaccination as a beneficial preventive measure (very beneficial vs not beneficial OR = 6.4; CI 3.0-13.7) and knowledge of the Meningococcal C vaccine (OR = 1.4; CI 1.1-1.8) were strongly associated to willingness to receive 4 CMenB vaccine. On the contrary, level of education was associated with refusal of immunization (university vs education level lower than middle school OR = 0.68; CI 0.47-0.97). Among the parents who were willing to immunize their children, 66.9% would agree with three injections to be administered during the same visit. A total of 291 HCWs (83.1%) agreed to participate in the survey; 73% considered 4 CMenB vaccine a priority in infants' immunization schedule; 26.8% of HCWs suggested the concomitant administration with routine infant immunization. Parental and HCWs acceptability of 4 CMenB vaccine was high. Increasing knowledge about meningitis and vaccine prevention might further increase the acceptability of this vaccine. PMID:25483638

  8. Knowledge, Perceptions and Acceptability to Strengthening Adolescents’ Sexual and Reproductive Health Education amongst Secondary Schools in Gulu District

    PubMed Central

    Herman, Lule; Ovuga, E.; Mshilla, M.; Ojara, S.; Kimbugwe, G.; Adrawa, A. P.; Mahuro, N.

    2014-01-01

    Adolescents in Northern Uganda are at risk of teenage pregnancies, unsafe abortions and sexually transmitted infections (STIs). There is silence on sex both at home and school. This cross sectional descriptive analytical study interviews a random sample of 827 students and 13 teachers on knowledge, perception and acceptability to a comprehensive adolescent sexual and reproductive health education in “O” and “A” level secondary schools in Gulu District. Quantitative data was analysed using SPSS 16.0. Directed content analysis of themes of transcribed qualitative data was conducted manually for common codes, sub-categories and categories. Of the 827 students; 54.3% (449) reported being in a sexual relationship especially those aged 15–17 years. Majority 96.1% (807) supported the teaching of a comprehensive ASRHE, citing no negative impact 71.5% (601). Majority 81.6% (686) agreed that such education could help prevention of STIs, abortions and teenage pregnancies, and that it should be taught by health workers 69.0% (580). Majority 76.6% (203) reported that ASRHE was not currently being taught in their schools. Students had low knowledge levels and misconceptions about ASRHE. ASRHE was highly acceptable though not being emphasized; its success in school settings requires multidisciplinary culturally sensitive approaches amongst which health workers should be frontiers. PMID:24748950

  9. Knowledge, Perceptions and Acceptability to Strengthening Adolescents' Sexual and Reproductive Health Education amongst Secondary Schools in Gulu District.

    PubMed

    Herman, Lule; Ovuga, E; Mshilla, M; Ojara, S; Kimbugwe, G; Adrawa, A P; Mahuro, N

    2013-07-25

    Adolescents in Northern Uganda are at risk of teenage pregnancies, unsafe abortions and sexually transmitted infections (STIs). There is silence on sex both at home and school. This cross sectional descriptive analytical study interviews a random sample of 827 students and 13 teachers on knowledge, perception and acceptability to a comprehensive adolescent sexual and reproductive health education in "O" and "A" level secondary schools in Gulu District. Quantitative data was analysed using SPSS 16.0. Directed content analysis of themes of transcribed qualitative data was conducted manually for common codes, sub-categories and categories. Of the 827 students; 54.3% (449) reported being in a sexual relationship especially those aged 15-17 years. Majority 96.1% (807) supported the teaching of a comprehensive ASRHE, citing no negative impact 71.5% (601). Majority 81.6% (686) agreed that such education could help prevention of STIs, abortions and teenage pregnancies, and that it should be taught by health workers 69.0% (580). Majority 76.6% (203) reported that ASRHE was not currently being taught in their schools. Students had low knowledge levels and misconceptions about ASRHE. ASRHE was highly acceptable though not being emphasized; its success in school settings requires multidisciplinary culturally sensitive approaches amongst which health workers should be frontiers. PMID:24748950

  10. Calculation of gas temperature at the outlet of the combustion chamber and in the air-gas channel of a gas-turbine unit by data of acceptance tests in accordance with ISO

    NASA Astrophysics Data System (ADS)

    Kostyuk, A. G.; Karpunin, A. P.

    2016-01-01

    This article describes a high accuracy method enabling performance of the calculation of real values of the initial temperature of a gas turbine unit (GTU), i.e., the gas temperature at the outlet of the combustion chamber, in a situation where manufacturers do not disclose this information. The features of the definition of the initial temperature of the GTU according to ISO standards were analyzed. It is noted that the true temperatures for high-temperature GTUs is significantly higher than values determined according to ISO standards. A computational procedure for the determination of gas temperatures in the air-gas channel of the gas turbine and cooling air consumptions over blade rims is proposed. As starting equations, the heat balance equation and the flow mixing equation for the combustion chamber are assumed. Results of acceptance GTU tests according to ISO standards and statistical dependencies of required cooling air consumptions on the gas temperature and the blade metal are also used for calculations. An example of the calculation is given for one of the units. Using a developed computer program, the temperatures in the air-gas channel of certain GTUs are calculated, taking into account their design features. These calculations are performed on the previously published procedure for the detailed calculation of the cooled gas turbine subject to additional losses arising because of the presence of the cooling system. The accuracy of calculations by the computer program is confirmed by conducting verification calculations for the GTU of the Mitsubishi Comp. and comparing results with published data of the company. Calculation data for temperatures were compared with the experimental data and the characteristics of the GTU, and the error of the proposed method is estimated.

  11. Acceptability and Applicability of an American Health Videogame with Story for Childhood Obesity Prevention Among Hong Kong Chinese Children

    PubMed Central

    Wang, Jingjing; Baranowski, Tom; Pitkethly, Amanda Jane; Buday, Richard

    2015-01-01

    Abstract Objective: Positive changes in diet have been observed in research carried out in the United States from the use of “Escape from Diab” (Diab), a health videogame designed to lower the risk of obesity and type 2 diabetes. Whether the American story and characters in Diab might be perceived by Hong Kong Chinese children as interesting has not been explored. This study assessed the acceptability and applicability of Diab among Hong Kong Chinese children, whether the Diab story was understood by them, and whether it had potential to influence them both during the game and afterward. Subjects and Methods: Thirty-four students (21 males, 13 females) 9–12 years of age were included. Upon completion of all the Diab episodes, children completed an immersion scale with 18 items, as well as an individual interview with 10 open-ended questions. Results: Children achieved average immersion after playing Diab with the mean score at 39.1 (standard deviation = 9.0), higher than the median (36) of possible scores (range, 18–54). Four themes using framework analysis emerged from the interviews, including intuitive feelings about the interface, playing experience, perception of the effect of Diab on behavior change, and the applicability of Diab to Hong Kong children. The story and game developed for American children were found acceptable and applicable to Hong Kong Chinese children. Conclusions: The combination of quantitative and qualitative methods confirmed the acceptability and applicability of Diab to Hong Kong Chinese children. PMID:26382015

  12. Factors Associated with Acceptance of Peers with Mental Health Problems in Childhood and Adolescence

    ERIC Educational Resources Information Center

    Swords, Lorraine; Heary, Caroline; Hennessy, Eilis

    2011-01-01

    Background: Research suggests that children's reactions to peers with mental health problems are related to the maintenance and outcomes of these problems. However, children's perceptions of such peers, particularly those with internalising problems, are neither well researched nor understood. The present study aimed to test a series of models…

  13. Cell Phone Usage among Adolescents in Uganda: Acceptability for Relaying Health Information

    ERIC Educational Resources Information Center

    Mitchell, Kimberly J.; Bull, Sheana; Kiwanuka, Julius; Ybarra, Michele L.

    2011-01-01

    The increase in cell phone use has manifested a growing interest in using this technology for health promotion. The portability and "always on" features of the cell phone, along with increasing capability for the devices to carry and transfer data suggest that they will reach more people than computers and the Internet in coming years.…

  14. Trends in task shifting in HIV treatment in Africa: Effectiveness, challenges and acceptability to the health professions

    PubMed Central

    Mayers, Pat

    2015-01-01

    Background Task shifting has been suggested to meet the demand for initiating and managing more patients on antiretroviral therapy. Although the idea of task shifting is not new, it acquires new relevance in the context of current healthcare delivery. Aim To appraise current trends in task shifting related to HIV treatment programmes in order to evaluate evidence related to the effectiveness of this strategy in addressing human resource constraints and improving patient outcomes, challenges identified in practice and the acceptability of this strategy to the health professions. Method Electronic databases were searched for studies published in English between January 2009 and December 2014. Keywords such as ‘task shifting’, ‘HIV treatment’, ‘human resources’ and ‘health professions’ were used. Results Evidence suggests that task shifting is an effective strategy for addressing human resource constraints in healthcare systems in many countries and provides a cost-effective approach without compromising patient outcomes. Challenges include inadequate supervision support and mentoring, absent regulatory frameworks, a lack of general health system strengthening and the need for monitoring and evaluation. The strategy generally seems to be accepted by the health professions although several arguments against task shifting as a long-term approach have been raised. Conclusion Task shifting occurs in many settings other than HIV treatment programmes and is viewed as a key strategy for governing human resources for healthcare. It may be an opportune time to review current task shifting recommendations to include a wider range of programmes and incorporate initiatives to address current challenges. PMID:26245622

  15. Public acceptability of government intervention to change health-related behaviours: a systematic review and narrative synthesis

    PubMed Central

    2013-01-01

    Background Governments can intervene to change health-related behaviours using various measures but are sensitive to public attitudes towards such interventions. This review describes public attitudes towards a range of policy interventions aimed at changing tobacco and alcohol use, diet, and physical activity, and the extent to which these attitudes vary with characteristics of (a) the targeted behaviour (b) the intervention and (c) the respondents. Methods We searched electronic databases and conducted a narrative synthesis of empirical studies that reported public attitudes in Europe, North America, Australia and New Zealand towards interventions relating to tobacco, alcohol, diet and physical activity. Two hundred studies met the inclusion criteria. Results Over half the studies (105/200, 53%) were conducted in North America, with the most common interventions relating to tobacco control (110/200, 55%), followed by alcohol (42/200, 21%), diet-related interventions (18/200, 9%), interventions targeting both diet and physical activity (18/200, 9%), and physical activity alone (3/200, 2%). Most studies used survey-based methods (160/200, 80%), and only ten used experimental designs. Acceptability varied as a function of: (a) the targeted behaviour, with more support observed for smoking-related interventions; (b) the type of intervention, with less intrusive interventions, those already implemented, and those targeting children and young people attracting most support; and (c) the characteristics of respondents, with support being highest in those not engaging in the targeted behaviour, and with women and older respondents being more likely to endorse more restrictive measures. Conclusions Public acceptability of government interventions to change behaviour is greatest for the least intrusive interventions, which are often the least effective, and for interventions targeting the behaviour of others, rather than the respondent him or herself. Experimental studies

  16. The acceptability and impact of a randomised controlled trial of welfare rights advice accessed via primary health care: qualitative study

    PubMed Central

    Moffatt, Suzanne; Mackintosh, Joan; White, Martin; Howel, Denise; Sandell, Adam

    2006-01-01

    Background Qualitative research is increasingly used alongside randomised controlled trials (RCTs) to study a range of factors including participants' experiences of a trial. The need for a sound evidence base within public health will increase the need for RCTs of non-clinical interventions. Welfare rights advice has been proposed as an intervention with potential to reduce health inequalities. This qualitative study, nested within an RCT of the impact of welfare rights advice, examined the acceptability of the intervention, the acceptability of the research process and the perceived impact of the intervention. Methods 25 men and women aged 60 years or over were recruited from four general practices in Newcastle upon Tyne (UK), a sub-sample of those who consented to be contacted (n = 96) during the RCT baseline interview. Semi-structured interviews were undertaken and analysed using the Framework Method. Results Participants viewed the trial positively although, despite agreeing that the information leaflet was clear, some had agreed to participate without being fully aware of what was involved. Some participants were unaware of the implications of randomisation. Most thought it fair, but a few concerns were raised about the control condition. The intervention was acceptable and made participants feel confident about applying for benefit entitlements. 14 out of 25 participants received some financial award; median weekly income gain was £57 (€84, $101). The perceived impact of additional finances was considerable and included: increased affordability of necessities and occasional expenses; increased capacity to deal with emergencies; and a reduction in stress related to financial worries. Overall, perceived independence and ability to participate in society increased. Most participants perceived benefits to their mental well-being, but no-one reported an improvement in physical health. The RCT showed little or no effect on a wide range of outcome measures

  17. Feasibility and acceptability of delivering adolescent health interventions alongside HPV vaccination in Tanzania

    PubMed Central

    Watson-Jones, Deborah; Lees, Shelley; Mwanga, Joseph; Neke, Nyasule; Changalucha, John; Broutet, Nathalie; Maduhu, Ibrahim; Kapiga, Saidi; Chandra-Mouli, Venkatraman; Bloem, Paul; Ross, David A

    2016-01-01

    Background: Human papillomavirus (HPV) vaccination offers an opportunity to strengthen provision of adolescent health interventions (AHI). We explored the feasibility of integrating other AHI with HPV vaccination in Tanzania. Methods: A desk review of 39 policy documents was preceded by a stakeholder meeting with 38 policy makers and partners. Eighteen key informant interviews (KIIs) with health and education policy makers and district officials were conducted to further explore perceptions of current programs, priorities and AHI that might be suitable for integration with HPV vaccination. Results: Fourteen school health interventions (SHI) or AHI are currently being implemented by the Government of Tanzania. Most are delivered as vertical programmes. Coverage of current programs is not universal, and is limited by financial, human resource and logistic constraints. Limited community engagement, rumours, and lack of strategic advocacy has affected uptake of some interventions, e.g. tetanus toxoid (TT) immunization. Stakeholder and KI perceptions and opinions were limited by a lack of experience with integrated delivery and AHI that were outside an individual’s area of expertise and experience. Deworming and educational sessions including reproductive health education were the most frequently mentioned interventions that respondents considered suitable for integrated delivery with HPV vaccine. Conclusions: Given programme constraints, limited experience with integrated delivery and concern about real or perceived side-effects being attributed to the vaccine, it will be very important to pilot-test integration of AHI/SHI with HPV vaccination. Selected interventions will need to be simple and quick to deliver since health workers are likely to face significant logistic and time constraints during vaccination visits. PMID:26768827

  18. Assessing the health and development of ART-conceived young adults: A study of feasibility, parent recall, and acceptability

    PubMed Central

    Fisher, Jane RW; Hammarberg, Karin; Baker, HW Gordon; McBain, John C

    2008-01-01

    Background Assisted reproductive technologies (ART) to treat infertility have been available for nearly three decades. There have been a number of systematic comparisons of the health and development of ART-conceived with spontaneously-conceived (SC) children. Data are equivocal, some finding no differences and others that there are more health and developmental problems in the ART group. It is agreed that perinatal mortality and morbidity are worse after assisted than spontaneous conception and the impact of the hormonally altered intrauterine environment on puberty and later fertility of offspring are unknown. To date however, there has been no investigation of the health and development of ART-conceived young adults, including from the world's few prospective cohorts of ART conceived children. Obtaining these data requires contact to be made with people at least twenty years after discharge from the treating service. Given the ethical difficulties of approaching families to participate in research up to two decades after cessation of treatment, the aim of this exploratory qualitative investigation was to assess the feasibility and acceptability of approaching mothers treated for infertility prior to 1988, and their recall of the health and development of their ART-conceived young adult children. Methods Mothers treated for infertility at the Royal Women's Hospital Reproductive Biology Unit in Melbourne, Australia prior to 1988 were approached by a senior clinician and invited to participate in individual semi-structured interviews which could include their partners and/or young adult children if they wished. Recruitment continued until theoretic saturation had been reached. Results Ten mothers, two of their husbands and five young adults participated in interviews, and the health and development of 15 ART-conceived young adults were described. The experience of conception, pregnancy, birth and the health and development of the children were recalled vividly and

  19. Operational-Condition-Independent Criteria Dedicated to Monitoring Wind Turbine Generators: Preprint

    SciTech Connect

    Yang, W.; Sheng, S.; Court, R.

    2012-08-01

    To date the existing wind turbine condition monitoring technologies and commercially available systems have not been fully accepted for improving wind turbine availability and reducing their operation and maintenance costs. One of the main reasons is that wind turbines are subject to constantly varying loads and operate at variable rotational speeds. As a consequence, the influences of turbine faults and the effects of varying load and speed are coupled together in wind turbine condition monitoring signals. So, there is an urgent need to either introduce some operational condition de-coupling procedures into the current wind turbine condition monitoring techniques or develop a new operational condition independent wind turbine condition monitoring technique to maintain high turbine availability and achieve the expected economic benefits from wind. The purpose of this paper is to develop such a technique. In the paper, three operational condition independent criteria are developed dedicated for monitoring the operation and health condition of wind turbine generators. All proposed criteria have been tested through both simulated and practical experiments. The experiments have shown that these criteria provide a solution for detecting both mechanical and electrical faults occurring in wind turbine generators.

  20. Are the lowest-cost healthful food plans culturally and socially acceptable?

    PubMed Central

    Maillot, Matthieu; Darmon, Nicole; Drewnowski, Adam

    2014-01-01

    Objective Nutritious yet inexpensive foods do exist. However, many such foods are rejected by the low-income consumer. Is it because their use violates unspoken social norms? The present study was designed to assess the variety and cost of the lowest-cost market basket of foods that simultaneously met required dietary standards and progressively stricter consumption constraints. Design A mathematical optimisation model was used to develop the lowest-cost food plans to meet three levels of nutritional requirements and seven levels of consumption constraints. Subjects: The nationally representative INCA (National Individual Survey of Food Consumption) dietary survey study of 1332 adults provided population estimates of food consumption patterns in France. Food plan costs were based on retail food prices. Results The lowest-cost food plans that provided 9204 kJ/d (2200 kcal/d) for men and 7531 kJ/d (1800 kcal/d) for women and met specified dietary standards could be obtained for ,1?50 h/d. The progressive imposition of consumption constraints designed to create more mainstream French diets sharply increased food plan costs, without improving nutritional value. Conclusions Minimising diet costs, while meeting nutrition standards only, led to food plans that provided little variety and deviated substantially from social norms. Aligning the food plan with mainstream consumption led to higher costs. Food plans designed for low-income groups need to be socially acceptable as well as affordable and nutritious. PMID:20105388

  1. Umami Increases Consumer Acceptability, and Perception of Sensory and Emotional Benefits without Compromising Health Benefit Perception.

    PubMed

    Miyaki, Takashi; Retiveau-Krogmann, Annlyse; Byrnes, Erin; Takehana, Shunji

    2016-02-01

    This study was undertaken to understand how consumers in the United States perceive umami-rich products, specifically low sodium chicken noodle soup. Results suggest that the addition of monosodium l-glutamate (MSG) at a concentration of 0.1% to 0.5%, alone or in synergy with 5'-ribonucleotides of inosine monophosphate (IMP) at 0.1% not only increases consumer acceptance but also positively impacts other aspects of consumer perception. Regardless of concentration of MSG and IMP, samples enhanced in umami compounds were perceived as more savory, flavorful, and less bland while providing a more homemade, fresh, and healthy wholesome taste than a control sample. From a functional and emotional benefit standpoint, when consuming umami-rich samples, consumers reported feeling significantly higher general satisfaction (they felt more content, relaxed, satisfied, less disappointed, dissatisfied…) and heightened positive emotions (happy, excited, indulgent…) than under the control condition. The feeling of being healthy while consuming the dish was not compromised. Last, when asked how they would feel if serving the soup sample to their family or friends, consumers projected feeling more positively under the umami-rich conditions (more happy, competent, loving, less dissatisfied or disappointed) compared to the control condition. PMID:26720057

  2. Changes in quality of life and perceptions of general health before and after operation of wind turbines.

    PubMed

    Jalali, Leila; Bigelow, Philip; McColl, Stephen; Majowicz, Shannon; Gohari, Mahmood; Waterhouse, Ryan

    2016-09-01

    Ontario is Canada's provincial leader in wind energy, with over 4000 MW of installed capacity supplying approximately five percent of the province's electricity demand. Wind energy is now one of the fastest-growing sources of renewable power in Canada and many other countries. However, its possible negative impact on population health, as a new source of environmental noise, has raised concerns for people living in proximity to wind turbines (WTs). The aims of this study were to assess the effect of individual differences and annoyance on the self-reported general health and health-related quality of life (QOL) of nearby residents, using a pre- and post-exposure design. Prospective cohort data were collected before and after WT operations, from the individuals (n = 43) in Ontario, Canada. General health and QOL metrics were measured using standard scales, such as SF12, life satisfaction scales developed by Diener (SWLS) and the Canadian Community Health Survey (CCHS-SWL). The mean values for the Mental Component Score of SF12 (p = 0.002), SWLS (p < 0.001), and CCHS-SWL (p = 0.044) significantly worsened after WT operation for those participants who had a negative attitude to WTs, who voiced concerns about property devaluation, and/or who reported being visually or noise annoyed. PMID:27321878

  3. Acceptability of a Personally Controlled Health Record in a Community-Based Setting: Implications for Policy and Design

    PubMed Central

    Kaci, Liljana; Mandl, Kenneth D

    2009-01-01

    Background Consumer-centered health information systems that address problems related to fragmented health records and disengaged and disempowered patients are needed, as are information systems that support public health monitoring and research. Personally controlled health records (PCHRs) represent one response to these needs. PCHRs are a special class of personal health records (PHRs) distinguished by the extent to which users control record access and contents. Recently launched PCHR platforms include Google Health, Microsoft’s HealthVault, and the Dossia platform, based on Indivo. Objective To understand the acceptability, early impacts, policy, and design requirements of PCHRs in a community-based setting. Methods Observational and narrative data relating to acceptability, adoption, and use of a personally controlled health record were collected and analyzed within a formative evaluation of a PCHR demonstration. Subjects were affiliates of a managed care organization run by an urban university in the northeastern United States. Data were collected using focus groups, semi-structured individual interviews, and content review of email communications. Subjects included: n = 20 administrators, clinicians, and institutional stakeholders who participated in pre-deployment group or individual interviews; n = 52 community members who participated in usability testing and/or pre-deployment piloting; and n = 250 subjects who participated in the full demonstration of which n = 81 initiated email communications to troubleshoot problems or provide feedback. All data were formatted as narrative text and coded thematically by two independent analysts using a shared rubric of a priori defined major codes. Sub-themes were identified by analysts using an iterative inductive process. Themes were reviewed within and across research activities (ie, focus group, usability testing, email content review) and triangulated to identify patterns. Results Low levels of familiarity with

  4. Clinical mentorship to improve pediatric quality of care at the health centers in rural Rwanda: a qualitative study of perceptions and acceptability of health care workers

    PubMed Central

    2014-01-01

    Background Despite evidence supporting Integrated Management of Childhood Illness (IMCI) as a strategy to improve pediatric care in countries with high child mortality, its implementation faces challenges related to lack of or poor post-didactic training supervision and gaps in necessary supporting systems. These constraints lead to health care workers’ inability to consistently translate IMCI knowledge and skills into practice. A program providing mentoring and enhanced supervision at health centers (MESH), focusing on clinical and systems improvement was implemented in rural Rwanda as a strategy to address these issues, with the ultimate goal of improving the quality of pediatric care at rural health centers. We explored perceptions of MESH from the perspective of IMCI clinical mentors, mentees, and district clinical leadership. Methods We conducted focus group discussions with 40 health care workers from 21 MESH-supported health centers. Two FGDs in each district were carried out, including one for nurses and one for director of health centers. District medical directors and clinical mentors had individual in-depth interviews. We performed a hermeneutic analysis using Atlas.ti v5.2. Results Study participants highlighted program components in five key areas that contributed to acceptability and impact, including: 1) Interactive, collaborative capacity-building, 2) active listening and relationships, 3) supporting not policing, 4) systems improvement, and 5) real-time feedback. Staff turn-over, stock-outs, and other facility/systems gaps were identified as barriers to MESH and IMCI implementation. Conclusion Health care workers reported high acceptance and positive perceptions of the MESH model as an effective strategy to build their capacity, bridge the gap between knowledge and practice in pediatric care, and address facility and systems issues. This approach also improved relationships between the district supervisory team and health center-based care

  5. [Are mortality indicators acceptable indicators for the quality of health care?].

    PubMed

    Ravaud, P; Giraudeau, B; Roux, P M; Durieux, P

    1999-10-01

    IMPORTANCE OF PUBLISHING MORTALITY RATES: Mortality rates for certain interventions or disease states have been used over the last decade as indicators of the quality of care provided by a given hospital, unit or, medical team. If published, these rates would be a useful tool for decision makers in the process of fund allocations, for public information, and for promoting improved care in hospitals or units with a low classification. METHODOLOGICAL LIMITATIONS: It is difficult to adjust an indicator of mortality to disease-related risk factors and any modification of this adjustment can have major consequences on the validity of subsequent comparisons. The differences in mortality observed between hospitals and physicians can reflect not only differences in quality of care but also differences in approaches to disease-related risk factors, therapeutic choices, or coding practices. The lack of statistical power is a major limiting factor in interpreting differences in mortality rates. To evidence a statistically significant difference in mortality between two hospitals whose rates are respectively 0.5% and 1% (for example in total hip replacement patients), it would be necessary to include 4673 patients, a number which would correspond to 20 years data for a hospital performing 230 interventions per year. Consequently, the number of interventions performed in the most active hospitals would not be sufficient to make such comparisons. LIMITATIONS AND COUNTER EFFECTS: Some studies have demonstrated that the publication of mortality rates does not have a major influence on patients' decisions nor on physicians' choice of a referral hospital. It would have no effect on improving health care quality of the institutions cited. One the contrary, certain counter effects have been observed: modification in patient recruitment, higher-risk patients being referred to hospitals with unpublished mortality rates. For many authors, procedure indicators are more pertinent than

  6. PCB contaminated dust on indoor surfaces--health risks and acceptable surface concentrations in residential and occupational settings.

    PubMed

    Kuusisto, Sari; Lindroos, Outi; Rantio, Tiina; Priha, Eero; Tuhkanen, Tuula

    2007-04-01

    Polychlorinated biphenyls (PCBs) have been used in diverse purposes such as indoor paints. Removal of these paints with dust creating techniques, like sandblasting, will result in contamination of building surfaces with PCB-containing dust. Objectives of this study was to analyze the PCB concentrations on surfaces after sandblasting with silica using wipe samples and estimate the resulting health risks and further calculate the risk based acceptable PCB surface concentrations that do not cause incremental lifetime cancer risk higher that 10(-5) or does not cause immunosupression effects in residential use or in occupational settings. Both deterministic and probabilistic approaches were used. The total PCB concentrations on surfaces ranged from 10 to 1100 microg/m(2). Estimated cancer risk was 1.2 x 10(-4) for childhood exposure, 1.3 x 10(-5) for adult residents and 1.5 x 10(-5) for occupational exposure. Probabilistic risk assessment revealed that point estimates were quite reasonable and located between 45th and 79th percentiles on probabilistic distribution of risk. The noncancer risks were calculated as hazard quotients (HQ) which ranged from 3.3 to 35 depending on the exposure scenario. Acceptable surface concentrations based on noncancer effects that are protective for 95% of exposed population were 7 microg/m(2) for residential use, 65 microg/m(2) for residential use if only adults will be exposed and 140 microg/m(2) for occupational use. Preliminary cleanup experiment revealed that when contaminated dust was carefully removed with industrial vacuum cleaner and further washed with terpene containing liquid the surface concentration dropped below the acceptable levels calculated in this study. PMID:17166563

  7. The effectiveness of acceptance and commitment therapy bibliotherapy for enhancing the psychological health of Japanese college students living abroad.

    PubMed

    Muto, Takashi; Hayes, Steven C; Jeffcoat, Tami

    2011-06-01

    International students often experience significant psychological distress but empirically tested programs are few. Broadly distributed bibliotherapy may provide a cost-effective approach. About half of the Japanese international students in a western university in the United States (N=70) were randomly assigned to a wait-list or to receive a Japanese translation of a broadly focused acceptance and commitment therapy (ACT) self-help book. Although recruited without regard to health status, the sample was highly distressed with nearly 80% exceeding clinical cutoffs on one or more measures. After a 2-months period for the first treatment group to read the book and a 2-month follow up, wait-list participants also received the book. Students receiving the book showed significantly better general mental health at post and follow up. Moderately depressed or stressed, and severely anxious students showed improvement compared to those not receiving the book. These patterns were repeated when the wait-list participants finally received the book. Improvements in primary outcomes were related to how much was learned about an ACT model from the book. Follow-up outcomes were statistically mediated by changes in psychological flexibility, but not vice versa and were moderated by level of initial flexibility. Overall, the data suggest that ACT bibliotherapy improved the mental health and psychological flexibility of Japanese international students. PMID:21496516

  8. Emotional tone of ontario newspaper articles on the health effects of industrial wind turbines before and after policy change.

    PubMed

    Deignan, Benjamin; Hoffman-Goetz, Laurie

    2015-01-01

    Newspapers are often a primary source of health information for the public about emerging technologies. Information in newspapers can amplify or attenuate readers' perceptions of health risk depending on how it is presented. Five geographically distinct wind energy installations in Ontario, Canada were identified, and newspapers published in their surrounding communities were systematically searched for articles on health effects from industrial wind turbines from May 2007 to April 2011. The authors retrieved 421 articles from 13 community, 2 provincial, and 2 national newspapers. To measure the emotional tone of the articles, the authors used a list of negative and positive words, informed from previous studies as well as from a random sample of newspaper articles included in this study. The majority of newspaper articles (64.6%, n = 272) emphasized negative rather than positive/neutral tone, with community newspapers publishing a higher proportion of negative articles than provincial or national newspapers, χ(2)(2) = 15.1, p < .001. Articles were more likely to be negative when published 2 years after compared with 2 years before provincial legislation to reduce dependence on fossil fuels (the Green Energy Act), χ(2)(3) = 9.7, p < .05. Repeated public exposure to negative newspaper content may heighten readers' health risk perceptions about wind energy. PMID:25806896

  9. Cell phone usage among adolescents in Uganda: acceptability for relaying health information.

    PubMed

    Mitchell, Kimberly J; Bull, Sheana; Kiwanuka, Julius; Ybarra, Michele L

    2011-10-01

    The increase in cell phone use has manifested a growing interest in using this technology for health promotion. The portability and 'always on' features of the cell phone, along with increasing capability for the devices to carry and transfer data suggest that they will reach more people than computers and the Internet in coming years. Self-reported quantitative survey data from 1503 secondary school students in Mbarara, Uganda collected in 2008-2009 suggest that 27% currently have cell phones and about half (51%) of all students and 61% of those who owned a cell phone believe that they would access a text messaging-based HIV prevention program if it were available. Other forms of program delivery modality (e.g. Internet, religious organizations, schools) were preferred to text messaging however. We are in need of effective HIV prevention programs that can reach large audiences at low cost and are culturally relevant for the East African context. Researchers are encouraged to consider translation of effective HIV prevention programs for cell phone delivery in Africa. PMID:21536715

  10. Cell phone usage among adolescents in Uganda: acceptability for relaying health information

    PubMed Central

    Mitchell, Kimberly J.; Bull, Sheana; Kiwanuka, Julius; Ybarra, Michele L.

    2011-01-01

    The increase in cell phone use has manifested a growing interest in using this technology for health promotion. The portability and ‘always on’ features of the cell phone, along with increasing capability for the devices to carry and transfer data suggest that they will reach more people than computers and the Internet in coming years. Self-reported quantitative survey data from 1503 secondary school students in Mbarara, Uganda collected in 2008–2009 suggest that 27% currently have cell phones and about half (51%) of all students and 61% of those who owned a cell phone believe that they would access a text messaging-based HIV prevention program if it were available. Other forms of program delivery modality (e.g. Internet, religious organizations, schools) were preferred to text messaging however. We are in need of effective HIV prevention programs that can reach large audiences at low cost and are culturally relevant for the East African context. Researchers are encouraged to consider translation of effective HIV prevention programs for cell phone delivery in Africa. PMID:21536715

  11. Effect of a health claim and personal characteristics on consumer acceptance of fruit juices with different concentrations of açaí (Euterpe oleracea Mart.).

    PubMed

    Sabbe, Sara; Verbeke, Wim; Deliza, Rosires; Matta, Virginia; Van Damme, Patrick

    2009-08-01

    This study evaluates the effect of a health claim and personal characteristics on the acceptance of two unfamiliar açaí fruit juices that have a low (40% açaí) versus a high (4% açaí) a priori overall liking. Hedonic and sensory measures as well as health- and nutrition-related attribute perceptions and purchase intention were rated before and after health information was presented. Differences in information effects due to interactions with juice type, consumer background attitudes and socio-demographics were investigated. Providing health information yielded a positive, though rather small increase, in overall liking, perceived healthiness and perceived nutritional value of both juices, as well as in their purchase intention. Sensory experiences remained predominant in the acceptance of the fruit juices, although the health claim had a stronger effect on the perceived healthiness and nutritional value of the least-liked juice. Background attitudes and socio-demographic characteristics influenced consumers' acceptance of both unfamiliar fruit juices. Health-oriented consumers were more likely to compromise on taste for an eventual health benefit, though they still preferred the best tasting juice. Consumers with a high food neophobia reported a lower liking for both unfamiliar fruit juices. Older respondents and women were more likely to accept fruit juices that claim a particular health benefit. PMID:19467277

  12. Turbinate surgery

    MedlinePlus

    Turbinectomy; Turbinoplasty; Turbinate reduction; Nasal airway surgery ... There are several types of turbinate surgery: Turbinectomy: All or part of the lower turbinate is taken out. This can be done in several different ways, but sometimes a ...

  13. Rotor anisotropy as a blade damage indicator for wind turbine structural health monitoring systems

    NASA Astrophysics Data System (ADS)

    Tcherniak, Dmitri

    2016-06-01

    Structural damage of a rotor blade causes structural anisotropy of the rotor. In rotor dynamic, the anisotropy affects the symmetry of the rotor mode shapes, and the latter can be utilized to detect the blade damage. The mode shape symmetry can be characterized by relative blades' magnitude and phase. The study examines the potential use of these parameters as rotor damage indicators. Firstly the indicators are studied analytically using a simple 6 degrees-of-freedom model of a rotating rotor. Floquet analysis is used due to the time periodic nature of the considered system. Floquet analysis allows one to perform analytical modal decomposition of the system and study the sensitivity of the damage indicators to the amount of damage. Secondly, operational modal analysis (OMA) is involved to extract the same damage indicators from simulated experimental data, which was synthesized via numerical simulations. Finally, the same procedure was applied to operating Vestas V27 wind turbine, first using the simulated experimental data obtained by using aeroelastic simulation code HAWC2 and then using the data acquired during the measurement campaign on a real wind turbine. The study demonstrates that the proposed damage indicators are significantly more sensitive than the commonly used changes in natural frequency, and in contrast to the latter, can also pinpoint the faulty blade. It is also demonstrated that these indicators can be derived from blades vibration data obtained from real life experiment.

  14. Acceptance speech.

    PubMed

    Carpenter, M

    1994-01-01

    In Bangladesh, the assistant administrator of USAID gave an acceptance speech at an awards ceremony on the occasion of the 25th anniversary of oral rehydration solution (ORS). The ceremony celebrated the key role of the International Centre for Diarrhoeal Disease Research, Bangladesh (ICDDR,B) in the discovery of ORS. Its research activities over the last 25 years have brought ORS to every village in the world, preventing more than a million deaths each year. ORS is the most important medical advance of the 20th century. It is affordable and client-oriented, a true appropriate technology. USAID has provided more than US$ 40 million to ICDDR,B for diarrheal disease and measles research, urban and rural applied family planning and maternal and child health research, and vaccine development. ICDDR,B began as the relatively small Cholera Research Laboratory and has grown into an acclaimed international center for health, family planning, and population research. It leads the world in diarrheal disease research. ICDDR,B is the leading center for applied health research in South Asia. It trains public health specialists from around the world. The government of Bangladesh and the international donor community have actively joined in support of ICDDR,B. The government applies the results of ICDDR,B research to its programs to improve the health and well-being of Bangladeshis. ICDDR,B now also studies acute respiratory diseases and measles. Population and health comprise 1 of USAID's 4 strategic priorities, the others being economic growth, environment, and democracy, USAID promotes people's participation in these 4 areas and in the design and implementation of development projects. USAID is committed to the use and improvement of ORS and to complementary strategies that further reduce diarrhea-related deaths. Continued collaboration with a strong user perspective and integrated services will lead to sustainable development. PMID:12345470

  15. Building on safety, feasibility, and acceptability: the impact and cost of community health worker provision of injectable contraception

    PubMed Central

    Chin-Quee, Dawn; Bratt, John; Malkin, Morrisa; Nduna, Mavis Mwale; Otterness, Conrad; Jumbe, Lydia; Mbewe, Reuben Kamoto

    2013-01-01

    ABSTRACT Background: A critical shortage of doctors, nurses, and midwives in many sub-Saharan African countries inhibits efforts to expand access to family planning services, especially in rural areas. One way to fill this gap is for community health workers (CHWs) to provide injectable contraceptives, an intervention for which there is growing evidence and international support. In 2009, with approval from the Government of Zambia (GoZ), FHI 360 collaborated with ChildFund Zambia to design and implement such an intervention as part of its existing CHW family planning program. Methods: The safety of CHW provision of injectable DMPA (depot medroxyprogesterone acetate) was measured by client reports and by a 21-item structured observation checklist. Feasibility and acceptability were measured by interviews with CHWs and a subset of DMPA clients. The impact of adding DMPA to pill and condom provision was assessed by family planning uptake among the clients of trained CHWs from February 2010 to February 2011. Costs were documented using spreadsheets over the period November 2009 to February 2011. Results: Scores were high on all measures of safety, feasibility, and acceptability. Couple-years of protection (CYP, protection from pregnancy for 1 year) was provided to 51 condom clients, 391 pill clients, and 2,206 DMPA clients. Of the 1,739 clients new to family planning, 85% chose injectable DMPA, while 13% chose pills and 2% chose condoms. Continuation rates were also high, at 63% after 1 year as compared with 47% for pill users. Incremental costs per couple-year were US$21.24 if 50% of users continue with CHW-provided DMPA. Conclusion: The study affirms that the provision of injectable contraceptives by CHWs is safe, acceptable, and feasible in the Zambian context, with very high rates of uptake in hard-to-reach areas. High continuation rates among clients mean that costs of the intervention can be low when added to an existing community-based distribution program

  16. Communication technology use and mHealth acceptance among HIV-infected men who have sex with men in Peru: implications for HIV prevention and treatment.

    PubMed

    Krishnan, Archana; Ferro, Enrico G; Weikum, Damian; Vagenas, Panagiotis; Lama, Javier R; Sanchez, Jorge; Altice, Frederick L

    2015-01-01

    The HIV epidemic in Peru is concentrated among men who have sex with men (MSM). Given that MSM have been documented as early adopters of emerging technology, we examined communication technology access and utilization, and mobile health (mHealth) acceptance among Peruvian MSM and transgender women (TGW) in order to gauge opportunities for mHealth-enabled HIV interventions. A convenience sample of 359 HIV-infected MSM and TGW recruited from three sites in Lima, Peru completed standardized assessments of alcohol use disorders (AUDs), risky sexual behavior, and antiretroviral therapy (ART) adherence along with self-constructed measures of communication technology access and utilization, and mHealth acceptance. Most participants (86%) had daily access to any cell phone, including smartphones (30%). The most frequent communication activities were receiving and making calls, and receiving and sending text messages using cell phones. On a 5-point Likert scale, participants expressed interest in using mHealth for medication reminders (M = 3.21, SD = 1.32) and engaging in anonymous online interactions with health professionals to discuss HIV-related issues (M = 3.56, SD = 1.33). Importantly, no significant differences were found in communication technology use and mHealth acceptance among participants with AUDs, depression, and suboptimal ART adherence, all of which are associated with poor HIV treatment outcomes. Findings show support for implementing mHealth-based intervention strategies using cell phones to assess and reduce HIV-risk behaviors among HIV-infected MSM and TGW. PMID:25285464

  17. MOD-2 wind turbine development

    NASA Technical Reports Server (NTRS)

    Gordon, L. H.; Andrews, J. S.; Zimmerman, D. K.

    1983-01-01

    The development of the Mod-2 turbine, designed to achieve a cost of electricity for the 100th production unit that will be competitive with conventional electric power generation is discussed. The Mod-2 wind turbine system (WTS) background, project flow, and a chronology of events and problem areas leading to Mod-2 acceptance are addressed. The role of the participating utility during site preparation, turbine erection and testing, remote operation, and routine operation and maintenance activity is reviewed. The technical areas discussed pertain to system performance, loads, and controls. Research and technical development of multimegawatt turbines is summarized.

  18. Using Virtual Reality to Provide Health Care Information to People With Intellectual Disabilities: Acceptability, Usability, and Potential Utility

    PubMed Central

    Conboy-Hill, Suzanne; Taylor, Dave

    2011-01-01

    Background People with intellectual disabilities have poor access to health care, which may be further compromised by a lack of accessible health information. To be effective, health information must be easily understood and remembered. People with intellectual disabilities learn better from multimodal information sources, and virtual reality offers a 3-dimensional (3D) computer-generated environment that can be used for providing information and learning. To date, research into virtual reality experiences for people with intellectual disabilities has been limited to skill-based training and leisure opportunities within the young to mid age ranges. Objective This study assessed the acceptability, usability, and potential utility of a virtual reality experience as a means of providing health care-related information to people with intellectual disabilities. We designed a prototype multimodal experience based on a hospital scenario and situated on an island in the Second Life 3D virtual world. We wanted to know how people of different ages and with varying levels of cognitive function would participate in the customized virtual environment, what they understood from being there, and what they remembered a week later. Methods The study drew on qualitative data. We used a participatory research approach that involved working alongside people with intellectual disabilities and their supporters in a community setting. Cognitive function was assessed, using the Matrix Analogies Test and the British Picture Vocabulary Scale, to describe the sample. Participants, supported by facilitators, were video recorded accessing and engaging with the virtual environment. We assessed recall 1 week later, using a specialized interview technique. Data were downloaded into NVivo 8 and analyzed using the framework analysis technique. Results Study participants were 20 people aged between 20 and 80 years with mild to severe intellectual disabilities. All participants were able to access

  19. Incremental net benefit and acceptability of alternative health policies: a case study of mass screening for colorectal cancer.

    PubMed

    Chauvin, Pauline; Josselin, Jean-Michel; Heresbach, Denis

    2012-06-01

    The incremental net benefit (INB) and the related acceptability curves for public health programs provide valuable tools for decision making. We proposed to apply them to the assessment of mass screening of colorectal cancer. The now standard guaiac fecal occult blood test (FOBT) is already implemented in several countries. We considered the innovative immunological FOBT and computed tomography colonography (CTC) as competing screening technologies. Using biennial guaiac FOBT as the reference strategy, we estimated the cost-effectiveness of the following alternatives: biennial immunological FOBT, CTC every 5 years (strategy CTC5), and CTC every 10 years (strategy CTC10). Over a 30-year horizon and from the perspective of a third-party payer, we developed a Markov model on a hypothetical cohort of 100,000 subjects at average risk of colorectal cancer. Close expected net benefits between immunological FOBT and CTC5 induced uncertainty in the choice of the optimal strategy. Probabilistic sensibility analysis then suggested that below a willingness to pay (WTP) per life-years gained (LYG) of 8,587 €/LYG, CTC10 was optimal, while CTC5 would be preferred beyond a WTP of 8,587 €/LYG. PMID:21305335

  20. Acceptance speech.

    PubMed

    Yusuf, C K

    1994-01-01

    I am proud and honored to accept this award on behalf of the Government of Bangladesh, and the millions of Bangladeshi children saved by oral rehydration solution. The Government of Bangladesh is grateful for this recognition of its commitment to international health and population research and cost-effective health care for all. The Government of Bangladesh has already made remarkable strides forward in the health and population sector, and this was recognized in UNICEF's 1993 "State of the World's Children". The national contraceptive prevalence rate, at 40%, is higher than that of many developed countries. It is appropriate that Bangladesh, where ORS was discovered, has the largest ORS production capacity in the world. It was remarkable that after the devastating cyclone in 1991, the country was able to produce enough ORS to meet the needs and remain self-sufficient. Similarly, Bangladesh has one of the most effective, flexible and efficient control of diarrheal disease and epidemic response program in the world. Through the country, doctors have been trained in diarrheal disease management, and stores of ORS are maintained ready for any outbreak. Despite grim predictions after the 1991 cyclone and the 1993 floods, relatively few people died from diarrheal disease. This is indicative of the strength of the national program. I want to take this opportunity to acknowledge the contribution of ICDDR, B and the important role it plays in supporting the Government's efforts in the health and population sector. The partnership between the Government of Bangladesh and ICDDR, B has already borne great fruit, and I hope and believe that it will continue to do so for many years in the future. Thank you. PMID:12345479

  1. Propulsion health monitoring of a turbine engine disk using spin test data

    NASA Astrophysics Data System (ADS)

    Abdul-Aziz, Ali; Woike, Mark; Oza, Nikunj; Matthews, Bryan; Baakilini, George

    2010-03-01

    On line detection techniques to monitor the health of rotating engine components are becoming increasingly attractive options to aircraft engine companies in order to increase safety of operation and lower maintenance costs. Health monitoring remains a challenging feature to easily implement, especially, in the presence of scattered loading conditions, crack size, component geometry and materials properties. The current trend, however, is to utilize noninvasive types of health monitoring or nondestructive techniques to detect hidden flaws and mini cracks before any catastrophic event occurs. These techniques go further to evaluate materials' discontinuities and other anomalies that have grown to the level of critical defects which can lead to failure. Generally, health monitoring is highly dependent on sensor systems that are capable of performing in various engine environmental conditions and able to transmit a signal upon a predetermined crack length, while acting in a neutral form upon the overall performance of the engine system. Efforts are under way at NASA Glenn Research Center through support of the Intelligent Vehicle Health Management Project (IVHM) to develop and implement such sensor technology for a wide variety of applications. These efforts are focused on developing high temperature, wireless, low cost and durable products. Therefore, in an effort to address the technical issues concerning health monitoring of a rotor disk, this paper considers data collected from an experimental study using high frequency capacitive sensor technology to capture blade tip clearance and tip timing measurements in a rotating engine-like-disk-to predict the disk faults and assess its structural integrity. The experimental results collected at a range of rotational speeds from tests conducted at the NASA Glenn Research Center's Rotordynamics Laboratory will be evaluated using multiple data-driven anomaly detection techniques to identify anomalies in the disk. This study

  2. NDE using sensor based approach to propulsion health monitoring of a turbine engine disk

    NASA Astrophysics Data System (ADS)

    Abdul-Aziz, Ali; Woike, Mark R.; Abumeri, G.; Lekki, John D.; Baaklini, George Y.

    2009-03-01

    Rotor health monitoring and on-line damage detection have been increasingly gaining interest to manufacturers of aircraft engines, primarily to increase safety of operation and lower the high maintenance costs. But health monitoring in the presence of scatter in the loading conditions, crack size, disk geometry, and material property is rather challenging. However, detection factors that cause fractures and hidden internal cracks can be implemented via noninvasive types of health monitoring and or nondestructive evaluation techniques. These evaluations go further to inspect materials discontinuities and other anomalies that have grown to become critical defects that can lead to failure. To address the bulk of these concerning issues and understand the technical aspects leading to these outcomes, a combined analytical and experimental study is being thought. Results produced from the experiments such as blade tip displacement and other data collected from tests conducted at the NASA Glenn Research Center's Rotordynamics Laboratory, a high precision spin rig, are evaluated, discussed and compared with data predicted from finite element analysis simulating the engine rotor disk spinning at various rotational speeds. Further computations using the progressive failure analysis (PFA) approach with GENOA code [6] to additionally assess the structural response, damage initiation, propagation, and failure criterion are also performed. This study presents an inclusive evaluation of an on-line health monitoring of a rotating disk and an examination for the capability of the in-house spin system in support of ongoing research under the NASA Integrated Vehicle Health Management (IVHM) program.

  3. Exposure-response relationship of wind turbine noise with self-reported symptoms of sleep and health problems: A nationwide socioacoustic survey in Japan.

    PubMed

    Kageyama, Takayuki; Yano, Takashi; Kuwano, Sonoko; Sueoka, Shinichi; Tachibana, Hideki

    2016-01-01

    The association of wind turbine noise (WTN) with sleep and physical/mental health has not been fully investigated. To investigate the relationship of WTN with the prevalence of self-reported symptoms of sleep and health problems, a socioacoustic survey of 1079 adult residents was conducted throughout Japan (2010-2012): 747 in 34 areas surrounding wind turbine plants and 332 in 16 control areas. During face-to-face interviews, the respondents were not informed of the purpose of the survey. Questions on symptoms such as sleeplessness and physical/mental complaints were asked without specifying reasons. Insomnia was defined as having one or any combination of the following that occurs three or more times a week and bothers a respondent: Difficulty initiating sleep, difficulty maintaining sleep, premature morning awakening, and feeling of light overnight sleep. Poor health was defined as having high scores for health complaints, as determined using the Total Health Index, exceeding the criteria proposed by the authors of the index. The noise descriptor for WTN was LAeq,n outdoor, estimated from the results of actual measurement at some locations in each site. Multiple logistic analysis was applied to the LAeq,n and insomnia or poor health. The odds ratio (OR) of insomnia was significantly higher when the noise exposure level exceeded 40 dB, whereas the self-reported sensitivity to noise and visual annoyance with wind turbines were also independently associated with insomnia. OR of poor health was not significant for noise exposure, but significant for noise sensitivity and visual annoyance. The above two moderators appear to indicate the features of respondents who are sensitive to stimuli or changes in their homeostasis. PMID:26960782

  4. Exposure-response relationship of wind turbine noise with self-reported symptoms of sleep and health problems: A nationwide socioacoustic survey in Japan

    PubMed Central

    Kageyama, Takayuki; Yano, Takashi; Kuwano, Sonoko; Sueoka, Shinichi; Tachibana, Hideki

    2016-01-01

    The association of wind turbine noise (WTN) with sleep and physical/mental health has not been fully investigated. To investigate the relationship of WTN with the prevalence of self-reported symptoms of sleep and health problems, a socioacoustic survey of 1079 adult residents was conducted throughout Japan (2010-2012): 747 in 34 areas surrounding wind turbine plants and 332 in 16 control areas. During face-to-face interviews, the respondents were not informed of the purpose of the survey. Questions on symptoms such as sleeplessness and physical/mental complaints were asked without specifying reasons. Insomnia was defined as having one or any combination of the following that occurs three or more times a week and bothers a respondent: Difficulty initiating sleep, difficulty maintaining sleep, premature morning awakening, and feeling of light overnight sleep. Poor health was defined as having high scores for health complaints, as determined using the Total Health Index, exceeding the criteria proposed by the authors of the index. The noise descriptor for WTN was LAeq,n outdoor, estimated from the results of actual measurement at some locations in each site. Multiple logistic analysis was applied to the LAeq,n and insomnia or poor health. The odds ratio (OR) of insomnia was significantly higher when the noise exposure level exceeded 40 dB, whereas the self-reported sensitivity to noise and visual annoyance with wind turbines were also independently associated with insomnia. OR of poor health was not significant for noise exposure, but significant for noise sensitivity and visual annoyance. The above two moderators appear to indicate the features of respondents who are sensitive to stimuli or changes in their homeostasis. PMID:26960782

  5. Advanced Monitoring to Improve Combustion Turbine/Combined Cycle Reliability, Availability & Maintainability

    SciTech Connect

    Leonard Angello

    2005-09-30

    Power generators are concerned with the maintenance costs associated with the advanced turbines that they are purchasing. Since these machines do not have fully established Operation and Maintenance (O&M) track records, power generators face financial risk due to uncertain future maintenance costs. This risk is of particular concern, as the electricity industry transitions to a competitive business environment in which unexpected O&M costs cannot be passed through to consumers. These concerns have accelerated the need for intelligent software-based diagnostic systems that can monitor the health of a combustion turbine in real time and provide valuable information on the machine's performance to its owner/operators. EPRI, Impact Technologies, Boyce Engineering, and Progress Energy have teamed to develop a suite of intelligent software tools integrated with a diagnostic monitoring platform that, in real time, interpret data to assess the 'total health' of combustion turbines. The 'Combustion Turbine Health Management System' (CTHMS) will consist of a series of 'Dynamic Link Library' (DLL) programs residing on a diagnostic monitoring platform that accepts turbine health data from existing monitoring instrumentation. CTHMS interprets sensor and instrument outputs, correlates them to a machine's condition, provide interpretative analyses, project servicing intervals, and estimate remaining component life. In addition, the CTHMS enables real-time anomaly detection and diagnostics of performance and mechanical faults, enabling power producers to more accurately predict critical component remaining useful life and turbine degradation.

  6. ADVANCED MONITORING TO IMPROVE COMBUSTION TURBINE/COMBINED CYCLE CT/(CC) RELIABILITY, AVAILABILITY AND MAINTAINABILITY (RAM)

    SciTech Connect

    Leonard Angello

    2004-09-30

    Power generators are concerned with the maintenance costs associated with the advanced turbines that they are purchasing. Since these machines do not have fully established operation and maintenance (O&M) track records, power generators face financial risk due to uncertain future maintenance costs. This risk is of particular concern, as the electricity industry transitions to a competitive business environment in which unexpected O&M costs cannot be passed through to consumers. These concerns have accelerated the need for intelligent software-based diagnostic systems that can monitor the health of a combustion turbine in real time and provide valuable information on the machine's performance to its owner/operators. EPRI, Impact Technologies, Boyce Engineering, and Progress Energy have teamed to develop a suite of intelligent software tools integrated with a diagnostic monitoring platform that will, in real time, interpret data to assess the ''total health'' of combustion turbines. The Combustion Turbine Health Management System (CTHM) will consist of a series of dynamic link library (DLL) programs residing on a diagnostic monitoring platform that accepts turbine health data from existing monitoring instrumentation. The CTHM system will be a significant improvement over currently available techniques for turbine monitoring and diagnostics. CTHM will interpret sensor and instrument outputs, correlate them to a machine's condition, provide interpretative analyses, project servicing intervals, and estimate remaining component life. In addition, it will enable real-time anomaly detection and diagnostics of performance and mechanical faults, enabling power producers to more accurately predict critical component remaining useful life and turbine degradation.

  7. ADVANCED MONITORING TO IMPROVE COMBUSTION TURBINE/COMBINED CYCLE CT/(CC) RELIABILITY, AVAILABILITY AND MAINTAINABILITY (RAM)

    SciTech Connect

    Leonard Angello

    2004-03-31

    Power generators are concerned with the maintenance costs associated with the advanced turbines that they are purchasing. Since these machines do not have fully established operation and maintenance (O&M) track records, power generators face financial risk due to uncertain future maintenance costs. This risk is of particular concern, as the electricity industry transitions to a competitive business environment in which unexpected O&M costs cannot be passed through to consumers. These concerns have accelerated the need for intelligent software-based diagnostic systems that can monitor the health of a combustion turbine in real time and provide valuable information on the machine's performance to its owner/operators. EPRI, Impact Technologies, Boyce Engineering, and Progress Energy have teamed to develop a suite of intelligent software tools integrated with a diagnostic monitoring platform that will, in real time, interpret data to assess the ''total health'' of combustion turbines. The Combustion Turbine Health Management System (CTHM) will consist of a series of dynamic link library (DLL) programs residing on a diagnostic monitoring platform that accepts turbine health data from existing monitoring instrumentation. The CTHM system will be a significant improvement over currently available techniques for turbine monitoring and diagnostics. CTHM will interpret sensor and instrument outputs, correlate them to a machine's condition, provide interpretative analyses, project servicing intervals, and estimate remaining component life. In addition, it will enable real-time anomaly detection and diagnostics of performance and mechanical faults, enabling power producers to more accurately predict critical component remaining useful life and turbine degradation.

  8. Health research access to personal confidential data in England and Wales: assessing any gap in public attitude between preferable and acceptable models of consent.

    PubMed

    Taylor, Mark J; Taylor, Natasha

    2014-12-01

    England and Wales are moving toward a model of 'opt out' for use of personal confidential data in health research. Existing research does not make clear how acceptable this move is to the public. While people are typically supportive of health research, when asked to describe the ideal level of control there is a marked lack of consensus over the preferred model of consent (e.g. explicit consent, opt out etc.). This study sought to investigate a relatively unexplored difference between the consent model that people prefer and that which they are willing to accept. It also sought to explore any reasons for such acceptance.A mixed methods approach was used to gather data, incorporating a structured questionnaire and in-depth focus group discussions led by an external facilitator. The sampling strategy was designed to recruit people with different involvement in the NHS but typically with experience of NHS services. Three separate focus groups were carried out over three consecutive days.The central finding is that people are typically willing to accept models of consent other than that which they would prefer. Such acceptance is typically conditional upon a number of factors, including: security and confidentiality, no inappropriate commercialisation or detrimental use, transparency, independent overview, the ability to object to any processing considered to be inappropriate or particularly sensitive.This study suggests that most people would find research use without the possibility of objection to be unacceptable. However, the study also suggests that people who would prefer to be asked explicitly before data were used for purposes beyond direct care may be willing to accept an opt out model of consent if the reasons for not seeking explicit consent are accessible to them and they trust that data is only going to be used under conditions, and with safeguards, that they would consider to be acceptable even if not preferable. PMID:26085451

  9. Structural Health Monitoring Static Test of a Wind Turbine Blade: August 1999

    SciTech Connect

    Sundaresan, M. J.; Schulz, M. J.; Ghoshal, A.

    2002-03-01

    Structural health monitoring research is being performed by NCA&T, the NREL and Sandia Laboratories to develop a''Smart Blade'' with an embedded sensor system integrated into the blade by the manufacturer to continuously monitor the condition of the loading in the blade and reduce or prevent fatigue damage of the blade. This will reduce maintenance costs and improve the reliability of wind power.

  10. Turbine engine rotor health monitoring evaluation by means of finite element analyses and spin tests data

    NASA Astrophysics Data System (ADS)

    Abdul-Aziz, Ali; Woike, Mark R.; Clem, Michelle; Baaklini, George Y.

    2014-04-01

    Generally, rotating engine components undergo high centrifugal loading environment which subject them to various types of failure initiation mechanisms. Health monitoring of these components is a necessity and is often challenging to implement. This is primarily due to numerous factors including the presence of scattered loading conditions, flaw sizes, component geometry and materials properties, all which hinder the simplicity of applying health monitoring applications. This paper represents a summary work of combined experimental and analytical modeling that included data collection from a spin test experiment of a rotor disk addressing the aforementioned durability issues. It further covers presentation of results obtained from a finite element modeling study to characterize the structural durability of a cracked rotor as it relates to the experimental findings. The experimental data include blade tip clearance, blade tip timing and shaft displacement measurements. The tests were conducted at the NASA Glenn Research Center's Rotordynamics Laboratory, a high precision spin rig. The results are evaluated and examined to determine their significance on the development of a health monitoring system to pre-predict cracks and other anomalies and to assist in initiating a supplemental physics based fault prediction analytical model.

  11. Types of social support and parental acceptance among transfemale youth and their impact on mental health, sexual debut, history of sex work and condomless anal intercourse

    PubMed Central

    Le, Victory; Arayasirikul, Sean; Chen, Yea-Hung; Jin, Harry; Wilson, Erin C

    2016-01-01

    Introduction Transfemale youth (TFY) are an underserved and understudied population at risk for numerous poor physical and mental health outcomes, most notably HIV. Research suggests that parental acceptance and social support may serve as protective factors against HIV and other risks for TFY; however, it is unclear whether TFY receive primary social support from parents with or without parental acceptance of their gender identity. This study examines differences in parental acceptance, mental health and the HIV risk factors of history of sex work, age at sexual debut and engagement in condomless anal intercourse between TFY with two types of primary social support – non-parental primary social support (NPPSS) and parental primary social support (PPSS). Methods Cross-sectional data collected from 301 TFY from 2012 to 2014 in the San Francisco Bay Area were analyzed to determine differences in parental acceptance, mental health and HIV risk factors between youth with and without PPSS. Univariate statistics and chi-squared tests were conducted to determine if parental acceptance and health outcomes were correlated with type of social support. Results Two-hundred fifty-one participants (83.7%) reported having NPPSS, and 49 (16.3%) reported PPSS. Significantly more youth with PPSS reported affirmative responses on parental acceptance items than their NPPSS counterparts. For example, 87.8% of youth with PPSS reported that their parents believed they could have a happy future as a trans adult, compared with 51.6% of youth with NPPSS (p<0.001). Fewer participants with PPSS reported symptoms of psychological distress (2.0% vs. 12.5%, p=0.057), though this finding was not statistically significant; no significant associations were found between primary social support type and HIV risk factors. Conclusions These results suggest that TFY with parental acceptance of their gender identity may be more likely to reach out to their parents as their primary source of social

  12. Health diplomacy the adaptation of global health interventions to local needs in sub-Saharan Africa and Thailand: Evaluating findings from Project Accept (HPTN 043)

    PubMed Central

    2012-01-01

    Background Study-based global health interventions, especially those that are conducted on an international or multi-site basis, frequently require site-specific adaptations in order to (1) respond to socio-cultural differences in risk determinants, (2) to make interventions more relevant to target population needs, and (3) in recognition of ‘global health diplomacy' issues. We report on the adaptations development, approval and implementation process from the Project Accept voluntary counseling and testing, community mobilization and post-test support services intervention. Methods We reviewed all relevant documentation collected during the study intervention period (e.g. monthly progress reports; bi-annual steering committee presentations) and conducted a series of semi-structured interviews with project directors and between 12 and 23 field staff at each study site in South Africa, Zimbabwe, Thailand and Tanzania during 2009. Respondents were asked to describe (1) the adaptations development and approval process and (2) the most successful site-specific adaptations from the perspective of facilitating intervention implementation. Results Across sites, proposed adaptations were identified by field staff and submitted to project directors for review on a formally planned basis. The cross-site intervention sub-committee then ensured fidelity to the study protocol before approval. Successfully-implemented adaptations included: intervention delivery adaptations (e.g. development of tailored counseling messages for immigrant labour groups in South Africa) political, environmental and infrastructural adaptations (e.g. use of local community centers as VCT venues in Zimbabwe); religious adaptations (e.g. dividing clients by gender in Muslim areas of Tanzania); economic adaptations (e.g. co-provision of income generating skills classes in Zimbabwe); epidemiological adaptations (e.g. provision of ‘youth-friendly’ services in South Africa, Zimbabwe and Tanzania), and

  13. Early experiences on the feasibility, acceptability, and use of malaria rapid diagnostic tests at peripheral health centres in Uganda-insights into some barriers and facilitators

    PubMed Central

    2012-01-01

    Background While feasibility of new health technologies in well-resourced healthcare settings is extensively documented, it is largely unknown in low-resourced settings. Uganda's decision to deploy and scale up malaria rapid diagnostic tests (mRDTs) in public health facilities and at the community level provides a useful entry point for documenting field experience, acceptance, and predictive variables for technology acceptance and use. These findings are important in informing implementation of new health technologies, plans, and budgets in low-resourced national disease control programmes. Methods A cross-sectional qualitative descriptive study at 21 health centres in Uganda was undertaken in 2007 to elucidate the barriers and facilitators in the introduction of mRDTs as a new diagnostic technology at lower-level health facilities. Pre-tested interview questionnaires were administered through pre-structured patient exit interviews and semi-structured health worker interviews to gain an understanding of the response to this implementation. A conceptual framework on technology acceptance and use was adapted for this study and used to prepare the questionnaires. Thematic analysis was used to generate themes from the data. Results A total of 52 of 57 health workers (92%) reported a belief that a positive mRDT result was true, although only 41 of 57 (64%) believed that treatment with anti-malarials was justified for every positive mRDT case. Of the same health workers, only 49% believed that a negative mRDT result was truly negative. Factors linked to these findings were related to mRDT acceptance and use, including the design and characteristics of the device, availability and quality of mRDT ancillary supplies, health worker capacity to investigate febrile cases testing negative with the device and provide appropriate treatment, availability of effective malaria treatments, reliability of the health commodity supply chain, existing national policy recommendations

  14. Enhancing user acceptance of mandated mobile health information systems: the ePOC (electronic point-of-care project) experience.

    PubMed

    Burgess, Lois; Sargent, Jason

    2007-01-01

    From a clinical perspective, the use of mobile technologies, such as Personal Digital Assistants (PDAs) within hospital environments is not new. A paradigm shift however is underway towards the acceptance and utility of these systems within mobile-based healthcare environments. Introducing new technologies and associated work practices has intrinsic risks which must be addressed. This paper contends that intervening to address user concerns as they arise throughout the system development lifecycle will lead to greater levels of user acceptance, while ultimately enhancing the deliverability of a system that provides a best fit with end user needs. It is envisaged this research will lead to the development of a formalised user acceptance framework based on an agile approach to user acceptance measurement. The results of an ongoing study of user perceptions towards a mandated electronic point-of-care information system in the Northern Illawarra Ambulatory Care Team (TACT) are presented. PMID:17911883

  15. Understanding the need of health care providers for teleconsultation and technological attributes in relation to the acceptance of teleconsultation in Malaysia: a mixed methods study.

    PubMed

    Maarop, Nurazean; Win, Khin Than

    2012-10-01

    The aim of this study was to explore the importance of service need along with perceived technology attributes in potentially influence the acceptance of teleconsultation. The study was conducted based on the concurrent triangulation design involving qualitative and quantitative study methods. These entailed interviews with key informants and questionnaires survey of health care providers who practiced in the participating hospitals in Malaysia. Thematic analysis involving iterative coding was conducted on qualitative data. Scale reliability test and hypothesis testing procedures were performed on quantitative data. Subsequently, both data were merged, compared and interpreted. In particular, this study utilized a qualitative priority such that a superior emphasis was placed on the qualitative method to demonstrate an overall understanding. Based on the responses of 20 key informants, there was a significant need for teleconsultation as a tool to extend health services to patients under constrained resources and critical conditions. Apparently, the latest attributes of teleconsultation technology have generally met users' expectation but rather perceived as supportive facets in encouraging the usage. Concurrently, based on the survey engaging 72 health care providers, teleconsultation acceptance was statistically proven to be strongly associated with service need and not originated exclusively from the technological attributes. Additionally, the results of this study can be used to promote teleconsultation as an effective means in delivering better health services. Thus, the categories emerged from this study may be further revised and examined for explaining the acceptance of teleconsultation technology in other relevant contexts. PMID:21826500

  16. Evaluation of the Compliance, Acceptance, and Usability of a Web-Based eHealth Intervention for Parents of Children With Infantile Hemangiomas: Usability Study

    PubMed Central

    Totte, Joan; Breugem, Corstiaan; van Os-Medendorp, Harmieke; Pasmans, Suzanne

    2013-01-01

    Background Infantile hemangiomas (IH) are common benign vascular tumors in children. Recognition and timely referral of high risk IH to specialized centers is important. This might be achieved by involving parents in the care for IH by means of an eHealth intervention. Objective The objective of our study was to evaluate parent compliance, acceptance, and usability of an open access, Web-based eHealth intervention (including e-learning and e-consult) designed to increase parents’ knowledge and (risk) evaluation of IH. Methods A cross-sectional study of parents who completed the eHealth intervention between October 2010 and November 2012 was carried out. All parents were sent a study questionnaire. Questions to evaluate compliance (to the advice given by a dermatologist during e-consultation) were asked. Acceptance and usability were evaluated by using the modified Technology Acceptance Model. Results A total of 224 parents completed the eHealth intervention and received the questionnaire, 135/224 parents responded (response rate was 60.3%). There were 128/135 questionnaires that were completed and included. A total of 110/128 (85.9%) parents were compliant to the advice of the dermatologist. There were 116.8/128 (91.3%) that perceived the eHealth intervention as useful and almost all parents (98.4%, 126/128) found the information in the e-learning clear. There were 29/128 (22.7%) that experienced technical problems. The majority of the parents (94.5%, 121/128) found the eHealth intervention reliable and most of them (98.4%, 126/128) would recommend the eHealth intervention to other parents. Noncompliant parents judged the eHealth intervention significantly less reliable compared to compliant parents (71%, 10/14 versus 97.3%, 107/110; P=.003). Conclusions Parents of children with an IH showed a high compliance (85.9%, 110/128) to the advice of the dermatologist given via our Web-based eHealth intervention. This high compliance might be positively influenced by the

  17. Assessing the Acceptability and Usability of an Internet-Based Intelligent Health Assistant Developed for Use among Turkish Migrants: Results of a Study Conducted in Bremen, Germany.

    PubMed

    Samkange-Zeeb, Florence; Ernst, Sinja Alexandra; Klein-Ellinghaus, Funda; Brand, Tilman; Reeske-Behrens, Anna; Plumbaum, Till; Zeeb, Hajo

    2015-12-01

    The Internet offers a new chance for health professionals to reach population groups not usually reached through traditional information channels, for example, migrants. Criticism has, however, been raised that most health information on the Internet is not easy to read and lacks cultural sensitivity. We developed an Internet-based bilingual health assistant especially for Turkish migrants in Germany, tested its acceptance, and evaluated its usability in a participatory research design with families with and without Turkish migrant background. The interactive health assistant covered the following: nutrition, physical activity, overweight, diabetes, as well as pregnancy and pregnancy support. The idea of an Internet-based health assistant was generally accepted by all participants of the evaluation study, as long as it would be incorporated in existing appliances, such as smartphones. The bilingual nature of the assistant was welcomed especially by first generation migrants, but migrant participants also indicated that not all health information needed to be made available in a culture-specific way. The participants were least satisfied with the nutrition component, which they felt should include recipes and ingredients from the culture of origin, as well as specific aspects of food preparation. PMID:26633455

  18. Assessing the Acceptability and Usability of an Internet-Based Intelligent Health Assistant Developed for Use among Turkish Migrants: Results of a Study Conducted in Bremen, Germany

    PubMed Central

    Samkange-Zeeb, Florence; Ernst, Sinja Alexandra; Klein-Ellinghaus, Funda; Brand, Tilman; Reeske-Behrens, Anna; Plumbaum, Till; Zeeb, Hajo

    2015-01-01

    The Internet offers a new chance for health professionals to reach population groups not usually reached through traditional information channels, for example, migrants. Criticism has, however, been raised that most health information on the Internet is not easy to read and lacks cultural sensitivity. We developed an Internet-based bilingual health assistant especially for Turkish migrants in Germany, tested its acceptance, and evaluated its usability in a participatory research design with families with and without Turkish migrant background. The interactive health assistant covered the following: nutrition, physical activity, overweight, diabetes, as well as pregnancy and pregnancy support. The idea of an Internet-based health assistant was generally accepted by all participants of the evaluation study, as long as it would be incorporated in existing appliances, such as smartphones. The bilingual nature of the assistant was welcomed especially by first generation migrants, but migrant participants also indicated that not all health information needed to be made available in a culture-specific way. The participants were least satisfied with the nutrition component, which they felt should include recipes and ingredients from the culture of origin, as well as specific aspects of food preparation. PMID:26633455

  19. Structural health and prognostics management for offshore wind turbines : case studies of rotor fault and blade damage with initial O&M cost modeling.

    SciTech Connect

    Myrent, Noah J.; Kusnick, Joshua F.; Barrett, Natalie C.; Adams, Douglas E.; Griffith, Daniel Todd

    2013-04-01

    Operations and maintenance costs for offshore wind plants are significantly higher than the current costs for land-based (onshore) wind plants. One way to reduce these costs would be to implement a structural health and prognostic management (SHPM) system as part of a condition based maintenance paradigm with smart load management and utilize a state-based cost model to assess the economics associated with use of the SHPM system. To facilitate the development of such a system a multi-scale modeling approach developed in prior work is used to identify how the underlying physics of the system are affected by the presence of damage and faults, and how these changes manifest themselves in the operational response of a full turbine. This methodology was used to investigate two case studies: (1) the effects of rotor imbalance due to pitch error (aerodynamic imbalance) and mass imbalance and (2) disbond of the shear web; both on a 5-MW offshore wind turbine in the present report. Based on simulations of damage in the turbine model, the operational measurements that demonstrated the highest sensitivity to the damage/faults were the blade tip accelerations and local pitching moments for both imbalance and shear web disbond. The initial cost model provided a great deal of insight into the estimated savings in operations and maintenance costs due to the implementation of an effective SHPM system. The integration of the health monitoring information and O&M cost versus damage/fault severity information provides the initial steps to identify processes to reduce operations and maintenance costs for an offshore wind farm while increasing turbine availability, revenue, and overall profit.

  20. Variable stator radial turbine

    NASA Technical Reports Server (NTRS)

    Rogo, C.; Hajek, T.; Chen, A. G.

    1984-01-01

    A radial turbine stage with a variable area nozzle was investigated. A high work capacity turbine design with a known high performance base was modified to accept a fixed vane stagger angle moveable sidewall nozzle. The nozzle area was varied by moving the forward and rearward sidewalls. Diffusing and accelerating rotor inlet ramps were evaluated in combinations with hub and shroud rotor exit rings. Performance of contoured sidewalls and the location of the sidewall split line with respect to the rotor inlet was compared to the baseline. Performance and rotor exit survey data are presented for 31 different geometries. Detail survey data at the nozzle exit are given in contour plot format for five configurations. A data base is provided for a variable geometry concept that is a viable alternative to the more common pivoted vane variable geometry radial turbine.

  1. Ohio Appalachia public health department personnel: human papillomavirus (HPV) vaccine availability, and acceptance and concerns among parents of male and female adolescents.

    PubMed

    Oldach, Benjamin R; Katz, Mira L

    2012-12-01

    Public health departments (n = 48) serving the 32 counties of Ohio Appalachia were contacted to determine human papillomavirus (HPV) vaccine availability and to assess patient and parental attitudes, perceived barriers, and decisional differences about vaccination for male and female adolescents. Nurses or nursing supervisors in 46 of 48 health departments agreed to participate with 45 (97.8 %) reporting that HPV vaccines were available for males and females. HPV vaccination barriers reported most frequently were lack of knowledge about the vaccines, concerns about potential side effects, the newness of the HPV vaccines, and parents believing their children were not sexually active or were too young to receive an HPV vaccine. Provider reports of the primary differences in the acceptability of an HPV vaccine among parents of males compared to the parents of females were lack of awareness that an HPV vaccine was available for males, not understanding why the vaccine should be given to males, and fear of vaccination increasing sexual promiscuity among female adolescents. Half of the health departments (n = 24) reported that parents of females were more receptive toward HPV vaccination, 16 health departments reported no difference in acceptability based on gender of the child, and 5 health departments reported that parents of males were more receptive. This study suggests that there are different informational needs of males and females and parents of male and female children when making an informed decision about HPV vaccination. Findings highlight content to include in strategies to increase HPV vaccination rates among Appalachia Ohio residents. PMID:22968822

  2. 'Becoming accepted': The complementary and alternative medicine practitioners' response to the uptake and practice of traditional medicine therapies by the mainstream health sector.

    PubMed

    Wiese, Marlene; Oster, Candice

    2010-07-01

    This Australian study sought to understand how practitioners of the traditional systems of what is now termed complementary and alternative medicine (CAM) are responding to the adoption of their traditional medicine therapies by the mainstream health care system, and the practice of these therapies by mainstream health care practitioners. A grounded theory approach was used for this study. In-depth interviews were conducted with 19 participants who were non-mainstream practitioners from five traditional systems of medicine - Traditional Chinese Medicine,Ayurveda, Naturopathy, Homeopathy and Western Herbal Medicine. Four main conceptual categories were identified: Losing Control of the CAM Occupational Domain (the participants' main concern); Personal Positioning; Professional Positioning (the core category); and Legitimacy.These categories formed the elements of the substantive theory of 'becoming accepted' as a legitimate health care provider in the mainstream health system, which explained the basic social process that the study's participants were using to resolve their main concern. PMID:20603310

  3. Structural health monitoring of wind turbine blade using fiber Bragg grating sensors and fiber optic rotary joint

    NASA Astrophysics Data System (ADS)

    Chen, Y.; Ni, Y. Q.; Ye, X. W.; Yang, H. X.; Zhu, S.

    2012-04-01

    Wind energy utilization as a reliable energy source has become a large industry in the last 20 years. Nowadays, wind turbines can generate megawatts of power and have rotor diameters that are on the order of 100 meters in diameter. One of the key components in a wind turbine is the blade which could be damaged by moisture absorption, fatigue, wind gusts or lighting strikes. The wind turbine blades should be routinely monitored to improve safety, minimize downtime, lower the risk of sudden breakdowns and associated huge maintenance and logistics costs, and provide reliable power generation. In this paper, a real-time wind turbine blade monitoring system using fiber Bragg grating (FBG) sensors with the fiber optic rotary joint (FORJ) is proposed, and applied to monitor the structural responses of a 600 W small scale wind turbine. The feasibility and effectiveness of the FORJ is validated by continuously transmitting the optical signals between the FBG interrogator at the stationary side and the FBG sensors on the rotating part. A comparison study between the measured data from the proposed system and those from an IMote2-based wireless strain measurement system is conducted.

  4. Matching Interventions to Children's Mental Health Needs: Feasibility and Acceptability of a Pilot School-Based Trauma Intervention Program

    ERIC Educational Resources Information Center

    Brown, Elissa J.; McQuaid, Jennifer; Farina, Lana; Ali, Rehana; Winnick-Gelles, Amy

    2006-01-01

    The primary goal was to develop and implement a school-based, trauma-specific intervention program for inner-city children exposed to the World Trade Center attacks on September 11th, 2001. The feasibility and acceptability of the program, and its research component, were examined. The efficacy of the program was evaluated in a pilot study.…

  5. Steam Turbines

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Turbonetics Energy, Inc.'s steam turbines are used as power generating systems in the oil and gas, chemical, pharmaceuticals, metals and mining, and pulp and paper industries. The Turbonetics line benefited from use of NASA research data on radial inflow steam turbines and from company contact with personnel of Lewis Research Center, also use of Lewis-developed computer programs to determine performance characteristics of turbines.

  6. Acceptability, Usability, and Views on Deployment of Peek, a Mobile Phone mHealth Intervention for Eye Care in Kenya: Qualitative Study

    PubMed Central

    Karanja, Sarah; Lees, Shelley; Bastawrous, Andrew

    2016-01-01

    Background The Portable Eye Examination Kit (Peek) is a mobile phone–based ophthalmic testing system that has been developed to perform comprehensive eye examinations. Shortages in ophthalmic personnel, the high cost, and the difficulty in transporting equipment have made it challenging to offer services, particularly in rural areas. Peek offers a solution for overcoming barriers of limited access to traditional ophthalmic testing methods and has been pilot tested on adults in Nakuru, Kenya, and compared with traditional eye examination tools. Objective This qualitative study evaluated the acceptability and usability of Peek in addition to perceptions regarding its adoption and nationwide deployment. Methods Semistructured interviews were conducted with patients and analyzed using a framework approach. This included analysis of interviews from 20 patients, 8 health care providers (HCPs), and 4 key decision makers in ophthalmic health care provision in Kenya. The participants were purposefully sampled. The coding structure involved predefined themes for assessing the following: (1) the context, that is, environment, user, task, and technology; (2) patient acceptability, that is, patients' perceived benefits, patient preference, and patient satisfaction; (3) usability, that is, efficiency, effectiveness, learnability, and flexibility and operability of Peek; and (4) the benefits of Peek in strengthening eye care provision, that is, capabilities enhancer, opportunity creator, social enabler, and knowledge generator. Emerging themes relating to the objectives were explored from the data using thematic analysis. Results Patients found Peek to be acceptable because of its benefits in overcoming the barriers to accessing ophthalmic services. Most thought it to be fast, convenient, and able to reach a large population. All patients expressed being satisfied with Peek. The HCPs perceived it to satisfy the criteria for usability and found Peek to be acceptable based on the

  7. Words matter: a qualitative investigation of which weight status terms are acceptable and motivate weight loss when used by health professionals

    PubMed Central

    2011-01-01

    Background Health professionals have an important role to play in the management of obesity, but may be unsure how to raise weight issues with patients. The societal stigma associated with excess weight means that weight status terms may be misunderstood, cause offence and risk upsetting patient-professional relationships. This study investigated the views of people who were overweight or obese on the acceptability of weight status terms and their potential to motivate weight loss when used by health professionals. Methods A qualitative study comprising 34 semi-structured interviews with men and women in their mid-to-late 30s and 50s who were overweight or obese and had recently been informed of their weight status. Thematic framework analysis was conducted to allow the systematic comparison of views by age, gender and apparent motivation to lose weight. Results Although many people favoured 'Overweight' to describe their weight status, there were doubts about its effectiveness to motivate weight loss. Terms including 'BMI' ('Body Mass Index') or referring to the unhealthy nature of their weight were generally considered acceptable and motivational, although a number of men questioned the validity of BMI as an indicator of excess weight. Participants, particularly women, felt that health professionals should avoid using 'Fat'. Whilst response to 'Obese' was largely negative, people recognised that it could be appropriate in a health consultation. Some younger people, particularly those who appeared motivated to lose weight, felt 'Obese' could encourage weight loss, but it was also clear the term could provoke negative emotions if used insensitively. Conclusions Although most people who are overweight or obese accept that it is appropriate for health professionals to discuss weight issues with patients, there is great variation in response to the terms commonly used to describe excess weight. There is no one-size-fits-all approach to discussing weight status: some

  8. Structural Health and Prognostics Management for Offshore Wind Turbines: Sensitivity Analysis of Rotor Fault and Blade Damage with O&M Cost Modeling

    SciTech Connect

    Myrent, Noah J.; Barrett, Natalie C.; Adams, Douglas E.; Griffith, Daniel Todd

    2014-07-01

    Operations and maintenance costs for offshore wind plants are significantly higher than the current costs for land-based (onshore) wind plants. One way to reduce these costs would be to implement a structural health and prognostic management (SHPM) system as part of a condition based maintenance paradigm with smart load management and utilize a state-based cost model to assess the economics associated with use of the SHPM system. To facilitate the development of such a system a multi-scale modeling and simulation approach developed in prior work is used to identify how the underlying physics of the system are affected by the presence of damage and faults, and how these changes manifest themselves in the operational response of a full turbine. This methodology was used to investigate two case studies: (1) the effects of rotor imbalance due to pitch error (aerodynamic imbalance) and mass imbalance and (2) disbond of the shear web; both on a 5-MW offshore wind turbine in the present report. Sensitivity analyses were carried out for the detection strategies of rotor imbalance and shear web disbond developed in prior work by evaluating the robustness of key measurement parameters in the presence of varying wind speeds, horizontal shear, and turbulence. Detection strategies were refined for these fault mechanisms and probabilities of detection were calculated. For all three fault mechanisms, the probability of detection was 96% or higher for the optimized wind speed ranges of the laminar, 30% horizontal shear, and 60% horizontal shear wind profiles. The revised cost model provided insight into the estimated savings in operations and maintenance costs as they relate to the characteristics of the SHPM system. The integration of the health monitoring information and O&M cost versus damage/fault severity information provides the initial steps to identify processes to reduce operations and maintenance costs for an offshore wind farm while increasing turbine availability

  9. Acceptability and feasibility of using non-specialist health workers to deliver mental health care: stakeholder perceptions from the PRIME district sites in Ethiopia, India, Nepal, South Africa, and Uganda.

    PubMed

    Mendenhall, Emily; De Silva, Mary J; Hanlon, Charlotte; Petersen, Inge; Shidhaye, Rahul; Jordans, Mark; Luitel, Nagendra; Ssebunnya, Joshua; Fekadu, Abebaw; Patel, Vikram; Tomlinson, Mark; Lund, Crick

    2014-10-01

    Three-quarters of the global mental health burden exists in low- and middle-income countries (LMICs), yet the lack of mental health services in resource-poor settings is striking. Task-sharing (also, task-shifting), where mental health care is provided by non-specialists, has been proposed to improve access to mental health care in LMICs. This multi-site qualitative study investigates the acceptability and feasibility of task-sharing mental health care in LMICs by examining perceptions of primary care service providers (physicians, nurses, and community health workers), community members, and service users in one district in each of the five countries participating in the PRogramme for Improving Mental health carE (PRIME): Ethiopia, India, Nepal, South Africa, and Uganda. Thirty-six focus group discussions and 164 in-depth interviews were conducted at the pre-implementation stage between February and October 2012 with the objective of developing district level plans to integrate mental health care into primary care. Perceptions of the acceptability and feasibility of task-sharing were evaluated first at the district level in each country through open-coding and then at the cross-country level through a secondary analysis of emergent themes. We found that task-sharing mental health services is perceived to be acceptable and feasible in these LMICs as long as key conditions are met: 1) increased numbers of human resources and better access to medications; 2) ongoing structured supportive supervision at the community and primary care-levels; and 3) adequate training and compensation for health workers involved in task-sharing. Taking into account the socio-cultural context is fundamental for identifying local personnel who can assist in detection of mental illness and facilitate treatment and care as well as training, supervision, and service delivery. By recognizing the systemic challenges and sociocultural nuances that may influence task-sharing mental health care

  10. Low Acceptability of A/H1N1 Pandemic Vaccination in French Adult Population: Did Public Health Policy Fuel Public Dissonance?

    PubMed Central

    Schwarzinger, Michaël; Flicoteaux, Rémi; Cortarenoda, Sébastien; Obadia, Yolande; Moatti, Jean-Paul

    2010-01-01

    Background In July 2009, French public health authorities embarked in a mass vaccination campaign against A/H1N1 2009 pandemic-influenza. We explored the attitudes and behaviors of the general population toward pandemic vaccination. Methodology/Principal Findings We conducted a cross-sectional online survey among 2,253 French representative adults aged 18 to 64 from November 17 to 25, 2009 (completion rate: 93.8%). The main outcome was the acceptability of A/H1N1 vaccination as defined by previous receipt or intention to get vaccinated (“Yes, certainly”, “Yes, probably”). Overall 17.0% (CI 95%, 15.5% to 18.7%) of respondents accepted A/H1N1 vaccination. Independent factors associated with acceptability included: male sex (p = .0001); older age (p = .002); highest or lowest level of education (p = .016); non-clerical occupation (p = .011); having only one child (p = .008); and having received seasonal flu vaccination in prior 3 years (p<.0001). Acceptability was also significantly higher among pregnant women (37.9%) and other at risk groups with chronic diseases (34.8%) (p = .002). Only 35.5% of respondents perceived A/H1N1 influenza illness as a severe disease and 12.7% had experienced A/H1N1 cases in their close relationships with higher acceptability (p<.0001 and p = .006, respectively). In comparison to 26.0% respondents who did not consult their primary care physician, acceptability was significantly higher among 8.0% respondents who were formally advised to get vaccinated, and lower among 63.7% respondents who were not advised to get vaccinated (respectively: 15.8%, 59.5% and 11.7%- p<.0001). Among respondents who refused vaccination, 71.2% expressed concerns about vaccine safety. Conclusions/Significance Our survey occurred one week before the peak of the pandemic in France. We found that alarming public health messages aiming at increasing the perception of risk severity were counteracted by daily personal experience which

  11. The Fruit & Vegetable Screener in the 2000 California Health Interview Survey: Definition of Acceptable Dietary Data Values

    Cancer.gov

    Data collected on the California Health Interview Survey (CHIS) Fruit and Vegetable Screener are coded as frequency and time unit - times per day, week, or month. The data contain some values that are very unlikely.

  12. Environmental, Health and Safety Assessment: ATS 7H Program (Phase 3R) Test Activities at the GE Power Systems Gas Turbine Manufacturing Facility, Greenville, SC

    SciTech Connect

    1998-11-17

    International Technology Corporation (IT) was contracted by General Electric Company (GE) to assist in the preparation of an Environmental, Health and Safety (HI&3) assessment of the implementation of Phase 3R of the Advanced Turbine System (ATS) 7H program at the GE Gas Turbines facility located in Greenville, South Carolina. The assessment was prepared in accordance with GE's contractual agreement with the U.S. Department of Energy (GE/DOE Cooperative Agreement DE-FC21-95MC3 1176) and supports compliance with the requirements of the National Environmental Policy Act of 1970. This report provides a summary of the EH&S review and includes the following: General description of current site operations and EH&S status, Description of proposed ATS 7H-related activities and discussion of the resulting environmental, health, safety and other impacts to the site and surrounding area. Listing of permits and/or licenses required to comply with federal, state and local regulations for proposed 7H-related activities. Assessment of adequacy of current and required permits, licenses, programs and/or plans.

  13. Turbine system

    DOEpatents

    McMahan, Kevin Weston; Dillard, Daniel Jackson

    2016-05-03

    A turbine system is disclosed. The turbine system includes a transition duct having an inlet, an outlet, and a passage extending between the inlet and the outlet and defining a longitudinal axis, a radial axis, and a tangential axis. The outlet of the transition duct is offset from the inlet along the longitudinal axis and the tangential axis. The turbine system further includes a turbine section connected to the transition duct. The turbine section includes a plurality of shroud blocks at least partially defining a hot gas path, a plurality of buckets at least partially disposed in the hot gas path, and a plurality of nozzles at least partially disposed in the hot gas path. At least one of a shroud block, a bucket, or a nozzle includes means for withstanding high temperatures.

  14. Selecting the Acceptance Criteria of Medicines in the Reimbursement List of Public Health Insurance of Iran, Using the “Borda” Method: a Pilot Study

    PubMed Central

    Viyanchi, Amir; Rasekh, Hamid Reza; Rajabzadeh Ghatari, Ali; SafiKhani, Hamid Reza

    2015-01-01

    Decision-making for medicines to be accepted in Iran’s public health insurance reimbursement list is a complex process and involves factors, which should be considered in applying a coverage for medicine costs. These processes and factors are not wholly assessed, while assessment of these factors is an essential need for getting a transparent and evidence-based approach toward medicine reimbursement in Iran. This paper aims to show an evidence-based approach toward medicine selection criteria to inform the medical reimbursement decision makers in Iranian health insurance organizations. To explore an adaptable decision-making framework while incorporating a method called “Borda” in medicine reimbursement assessment, we used the help of an expert group including decision makers and clinical researchers who are also policy makers to appraise the five chief criteria that have three sub criteria (Precision, Interpretability, and Cost). Also software “Math-lab”7, “SPSS” 17 and Excel 2007 were used in this study. “Borda” estimates the amount of perceived values from different criteria and creates a range from one to five while providing a comprehensive measurement of a large spectrum of criteria. Participants reported that the framework provided an efficient approach to systematic consideration in a pragmatic format consisting of many parts to guide decision-makings, including criteria and value (a model with the core of Borda) and evidences (medicine reimbursement based on criteria). The most important criterion for medicine acceptance in health insurance companies, in Iran, is the "life-threatening" factor and "evidence quality" is accounted as the fifth important factor. This pilot study showed the usefulness of incorporating Borda in medicine reimbursement decisions to support a transparent and systematic appraisal of health insurance companies' deeds. Further research is needed to advance Borda-based approaches that are effective on health insurance

  15. Selecting the Acceptance Criteria of Medicines in the Reimbursement List of Public Health Insurance of Iran, Using the "Borda" Method: a Pilot Study.

    PubMed

    Viyanchi, Amir; Rasekh, Hamid Reza; Rajabzadeh Ghatari, Ali; SafiKhani, Hamid Reza

    2015-01-01

    Decision-making for medicines to be accepted in Iran's public health insurance reimbursement list is a complex process and involves factors, which should be considered in applying a coverage for medicine costs. These processes and factors are not wholly assessed, while assessment of these factors is an essential need for getting a transparent and evidence-based approach toward medicine reimbursement in Iran. This paper aims to show an evidence-based approach toward medicine selection criteria to inform the medical reimbursement decision makers in Iranian health insurance organizations. To explore an adaptable decision-making framework while incorporating a method called "Borda" in medicine reimbursement assessment, we used the help of an expert group including decision makers and clinical researchers who are also policy makers to appraise the five chief criteria that have three sub criteria (Precision, Interpretability, and Cost). Also software "Math-lab"7, "SPSS" 17 and Excel 2007 were used in this study. "Borda" estimates the amount of perceived values from different criteria and creates a range from one to five while providing a comprehensive measurement of a large spectrum of criteria. Participants reported that the framework provided an efficient approach to systematic consideration in a pragmatic format consisting of many parts to guide decision-makings, including criteria and value (a model with the core of Borda) and evidences (medicine reimbursement based on criteria). The most important criterion for medicine acceptance in health insurance companies, in Iran, is the "life-threatening" factor and "evidence quality" is accounted as the fifth important factor. This pilot study showed the usefulness of incorporating Borda in medicine reimbursement decisions to support a transparent and systematic appraisal of health insurance companies' deeds. Further research is needed to advance Borda-based approaches that are effective on health insurance decision making

  16. Do Ask, Do Tell: High Levels of Acceptability by Patients of Routine Collection of Sexual Orientation and Gender Identity Data in Four Diverse American Community Health Centers

    PubMed Central

    Cahill, Sean; Singal, Robbie; Grasso, Chris; King, Dana; Mayer, Kenneth; Baker, Kellan; Makadon, Harvey

    2014-01-01

    Background The Institute of Medicine and The Joint Commission have recommended asking sexual orientation and gender identity (SOGI) questions in clinical settings and including such data in Electronic Health Records (EHRs). This is increasingly viewed as a critical step toward systematically documenting and addressing health disparities affecting lesbian, gay, bisexual, and transgender (LGBT) people. The U.S. government is currently considering whether to include SOGI data collection in the Stage 3 guidelines for the incentive program promoting meaningful use of EHR. However, some have questioned whether acceptable standard measures to collect SOGI data in clinical settings exist. Methods In order to better understand how a diverse group of patients would respond if SOGI questions were asked in primary care settings, 301 randomly selected patients receiving primary care at four health centers across the U.S. were asked SOGI questions and then asked follow-up questions. This sample was mainly heterosexual, racially diverse, and geographically and regionally broad. Results There was a strong consensus among patients surveyed about the importance of asking SOGI questions. Most of the LGBT respondents thought that the questions presented on the survey allowed them to accurately document their SOGI. Most respondents—heterosexual and LGBT—answered the questions, and said that they would answer such questions in the future. While there were some age-related differences, respondents of all ages overwhelmingly expressed support for asking SOGI questions and understood the importance of providers' knowing their patients' SOGI. Conclusions Given current deliberations within national health care regulatory bodies and the government's increased attention to LGBT health disparities, the finding that patients can and will answer SOGI questions has important implications for public policy. This study provides evidence that integrating SOGI data collection into the meaningful

  17. Acceptability and Utilization of Community Health Workers after the Adoption of the Integrated Community Case Management Policy in Kabarole District in Uganda

    PubMed Central

    Muhumuza, G; Mutesi, C; Mutamba, F; Ampuriire, P; Nangai, C

    2016-01-01

    Background Malaria, pneumonia and diarrhea remains to be the major causes of morbidity and mortality among children in Uganda. To address such challenges, the government adopted a national policy on Integrated Community Case Management (ICCM) for malaria, pneumonia and diarrhea in 2010. The aim of this study was to assess household access, utilization and acceptability of ICCM services in Kabarole District. Methods The study was carried out between 22nd November to 4th December, 2014 in Rwimi sub-county, Kabarole district. A cross sectional household survey was conducted amongst caretakers of children below 5 years of age and a total of 384 respondents were interviewed about distance from nearest health facility and community health worker, socio-demographic characteristics, type of housing, history of fever, health-seeking behavior, perceptions of quality and utilization of ICCM services. Data was cleaned, coded and analysed using STATA 14.0 to produce results. Results Most 53.1% of the studied children were males and their age ranged from 1–52 months. Nearly all the care takers, 97.1% (373/384) had utilized health services for their children in the three proceeding months to the study and of those, 0.5% (2/373) sought from a traditional healer, 8.6% (32/373) sought treatment at home, 27.3% (102/373) from community health worker, 27.3% (102/373) from government health unit and 36.2% (133/373) from non-government health units. The caretakers who stay near CHWs are more likely to utilize ICCM services than those staying near health facilities (P=0.001). The majority 65.6% of the caretakers stay near CHWs and use only 10 minutes to reach the CHWs. Trust in CHWs [AOR 0.85, 95%CI [0.641–1.135

  18. Hydraulic design development of Xiluodu Francis turbine

    NASA Astrophysics Data System (ADS)

    Wang, Y. L.; Li, G. Y.; Shi, Q. H.; Wang, Z. N.

    2012-11-01

    Hydraulic optimization design with CFD (Computational Fluid Dynamics) method, hydraulic optimization measures and model test results in the hydraulic development of Xiluodu hydropower station by DFEM (Dongfang Electric Machinery) of DEC (Dongfang Electric Corporation) of China were analyzed in this paper. The hydraulic development conditions of turbine, selection of design parameter, comparison of geometric parameters and optimization measure of turbine flow components were expatiated. And the measures of improving turbine hydraulic performance and the results of model turbine acceptance experiment were discussed in details.

  19. A randomized controlled trial of strong minds: A school-based mental health program combining acceptance and commitment therapy and positive psychology.

    PubMed

    Burckhardt, Rowan; Manicavasagar, Vijaya; Batterham, Philip J; Hadzi-Pavlovic, Dusan

    2016-08-01

    To date, most early intervention programs have been based on emotion regulation strategies that address dysfunctional cognitive appraisals, problem-solving skills, and rumination. Another emotion regulation strategy, 'acceptance' training, has largely been overlooked. To examine the efficacy of this strategy, a school-based mental health program combining positive psychology with acceptance and commitment therapy (Strong Minds) was evaluated in a randomized controlled trial with a sample of 267 Year 10 and 11 high-school students in Sydney, Australia. Mixed models for repeated measures examined whether the program led to reductions in symptoms amongst students who commenced the program with high depression, anxiety, and stress scores, and increased wellbeing scores amongst all students. Results demonstrated that compared to controls, participants in the Strong Minds condition with elevated symptom scores (n=63) reported significant reductions in depression (p=.047), stress (p=.01), and composite depression/anxiety symptoms (p=.02) with medium to strong effect sizes (Cohen's d=0.53, 0.74, and 0.57, respectively). Increased wellbeing (p=.03) in the total sample and decreased anxiety scores (p=.048) for students with elevated symptoms were significant for Year 10 students with medium effect sizes (Cohen's d=0.43 and 0.54, respectively). This study tentatively suggests that including the emotion regulation strategy of acceptance in early intervention programs may be effective in reducing symptoms and improving wellbeing in high school students. Further research to investigate the generalizability of these findings is warranted. PMID:27425565

  20. Advanced turbine systems program

    SciTech Connect

    Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

    1992-01-01

    In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

  1. Advanced turbine systems program

    SciTech Connect

    Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

    1992-12-31

    In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

  2. Acceptability and applicability of an American health videogame with story for childhood obesity prevention among Hong Kong Chinese children

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Positive changes in diet have been observed in research carried out in the United States from the use of "Escape from Diab" (Diab), a health videogame designed to lower the risk of obesity and type 2 diabetes. Whether the American story and characters in Diab might be perceived by Hong Kong Chinese ...

  3. Wind Turbine Contingency Control Through Generator De-Rating

    NASA Technical Reports Server (NTRS)

    Frost, Susan; Goebel, Kai; Balas, Mark

    2013-01-01

    Maximizing turbine up-time and reducing maintenance costs are key technology drivers for wind turbine operators. Components within wind turbines are subject to considerable stresses due to unpredictable environmental conditions resulting from rapidly changing local dynamics. In that context, systems health management has the aim to assess the state-of-health of components within a wind turbine, to estimate remaining life, and to aid in autonomous decision-making to minimize damage to the turbine. Advanced contingency control is one way to enable autonomous decision-making by providing the mechanism to enable safe and efficient turbine operation. The work reported herein explores the integration of condition monitoring of wind turbines with contingency control to balance the trade-offs between maintaining system health and energy capture. The contingency control involves de-rating the generator operating point to achieve reduced loads on the wind turbine. Results are demonstrated using a high fidelity simulator of a utility-scale wind turbine.

  4. ADVANCED TURBINE SYSTEMS PROGRAM

    SciTech Connect

    Gregory Gaul

    2004-04-21

    Natural gas combustion turbines are rapidly becoming the primary technology of choice for generating electricity. At least half of the new generating capacity added in the US over the next twenty years will be combustion turbine systems. The Department of Energy has cosponsored with Siemens Westinghouse, a program to maintain the technology lead in gas turbine systems. The very ambitious eight year program was designed to demonstrate a highly efficient and commercially acceptable power plant, with the ability to fire a wide range of fuels. The main goal of the Advanced Turbine Systems (ATS) Program was to develop ultra-high efficiency, environmentally superior and cost effective competitive gas turbine systems for base load application in utility, independent power producer and industrial markets. Performance targets were focused on natural gas as a fuel and included: System efficiency that exceeds 60% (lower heating value basis); Less than 10 ppmv NO{sub x} emissions without the use of post combustion controls; Busbar electricity that are less than 10% of state of the art systems; Reliability-Availability-Maintainability (RAM) equivalent to current systems; Water consumption minimized to levels consistent with cost and efficiency goals; and Commercial systems by the year 2000. In a parallel effort, the program was to focus on adapting the ATS engine to coal-derived or biomass fuels. In Phase 1 of the ATS Program, preliminary investigators on different gas turbine cycles demonstrated that net plant LHV based efficiency greater than 60% was achievable. In Phase 2 the more promising cycles were evaluated in greater detail and the closed-loop steam-cooled combined cycle was selected for development because it offered the best solution with least risk for achieving the ATS Program goals for plant efficiency, emissions, cost of electricity and RAM. Phase 2 also involved conceptual ATS engine and plant design and technology developments in aerodynamics, sealing

  5. An e-health system for the elderly (Butler Project): a pilot study on acceptance and satisfaction.

    PubMed

    Botella, Cristina; Etchemendy, Ernestina; Castilla, Diana; Baños, Rosa María; García-Palacios, Azucena; Quero, Soledad; Alcañiz, Mariano; Lozano, José Antonio

    2009-06-01

    The Butler Project is a technological e-health platform that uses the Internet to connect various users; it was designed to deliver health care to the elderly. The Butler platform has three levels of implementation: diagnosis (mood monitoring, alert system, management reports), therapy (training in inducing positive moods, memory work), and entertainment (e-mail, chat, video, photo albums, music, friend forums, accessibility to the Internet). The objective of this work is to describe the psychological aspects of the platform and to present data obtained from four users. Results show that after using the system, the participants increased their positive emotions and decreased their negative ones; in addition, they obtained high levels of satisfaction and experienced little difficulty in using the system. PMID:19445633

  6. Turbine Manufacture

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The machinery pictured is a set of Turbodyne steam turbines which power a sugar mill at Bell Glade, Florida. A NASA-developed computer program called NASTRAN aided development of these and other turbines manufactured by Turbodyne Corporation's Steam Turbine Division, Wellsville, New York. An acronym for NASA Structural Analysis Program, NASTRAN is a predictive tool which advises development teams how a structural design will perform under service use conditions. Turbodyne uses NASTRAN to analyze the dynamic behavior of steam turbine components, achieving substantial savings in development costs. One of the most widely used spinoffs, NASTRAN is made available to private industry through NASA's Computer Software Management Information Center (COSMIC) at the University of Georgia.

  7. Kshara application for turbinate hypertrophy.

    PubMed

    Kotrannavar, Vijay Kumar S; Angadi, Savita S

    2013-10-01

    Nasapratinaha (nasal obstruction) is a commonly encountered disease in clinical practice. It is one of the nasal disorders, explained in Ayurveda, having nasal obstruction leading to difficulty in breathing as the main cardinal feature. In contemporary science, this condition can be correlated with various diseases such as turbinate hypertrophy, deviated nasal septum, nasal mass, mucosal congestion, allergic rhinitis, and others; among which turbinate hypertrophy is a common cause. Turbinate hypertrophy can be treated with surgical and medical methods. The medical treatment has limitation for prolonged use because of health purpose, surgical approaches too have failed to achieve desired results in turbinate hypertrophy due to complications and high recurrence rate. The medical and surgical managements have their own limitations, merits, and demerits like synechiae formation, rhinitis sicca, severe bleeding, or osteonecrosis of the turbinate bone A parasurgical treatment explained in Ayurveda, known as kshara pratisarana, which is a minimal invasive and precise procedure for this ailment, tried to overcome this problem. 'Kshara Karma' is a popular treatment modality in Ayurveda, which has been advocated in disorders of nose like arbuda (tumor) and adhimamsa (muscular growth). Clinical observation has shown its effectiveness in the management of turbinate hypertrophy. A case report of 45-year-old male who presented with complaints of frequent nasal obstruction, nasal discharge, discomfort in nose, and headache; and diagnosed as turbinate hypertrophy has been presented here. The patient was treated with one application of Kshara over the turbinates. The treatment was effective and no recurrence was noticed in the follow up. PMID:24459392

  8. Impact of Acceptance and Commitment Therapy on Perceived Stress and Special Health Self-Efficacy in Seven to Fifteen-Year-Old Children With Diabetes Mellitus

    PubMed Central

    Moazzezi, Mousa; Ataie Moghanloo, Vahid; Ataie Moghanloo, Roghayeh; Pishvaei, Malihe

    2015-01-01

    Background: Diabetes Mellitus (DM) imposes restrictions on physical, emotional and social functioning of children and adolescents. Objectives: The aim of this study was to determine the impact of acceptance and commitment therapy (ACT) on perceived stress and special health self-efficacy in seven to fifteen-year-old children with DM. Patients and Methods: The present study was a clinical trial with a pretest-posttest control group design. The study population included all seven to fifteen-year-old patients who had referred to the Diabetes Mellitus Association of Tabriz, Iran, of whom 40 participants were selected using convenient sampling. They were randomly allocated to two matched groups (experimental and control). The experimental group participated in therapy sessions, while the control group did not receive any interventions. The research instruments were perceived stress and special health self-efficacy scales. Results: The multiple analysis of covariance (MANCOVA) results showed that the treatment was effective on variables of perceived stress and special health self-efficacy (P < 0.001). Conclusions: The ACT is effective for reducing perceived stress and increasing special health self-efficacy in children with DM. PMID:26288639

  9. Diagnosis of malaria in a remote area of the Philippines: comparison of techniques and their acceptance by health workers and the community.

    PubMed Central

    Bell, D.; Go, R.; Miguel, C.; Walker, J.; Cacal, L.; Saul, A.

    2001-01-01

    OBJECTIVE: To compare the efficacies of remote symptom-based diagnosis of malaria, rapid diagnostic tests and microscopy in an area of low endemicity in the Philippines. METHODS: In Trial I, 350 symptomatic patients were tested within their villages using malaria Plasmodium falciparum (Pf)/Plasmodium vivax (Pv) immunochromatographic tests (ICT tests) and blood films stored and read under local conditions. The slides were later restained and read. In Trial II, unsupervised volunteer barangay health workers prepared ICT tests and slides after brief training. These slides were read at rural health units. Twenty-seven barangay health workers and 72 community members were later questioned about the three diagnostic strategies. FINDINGS: A history of fever alone was sensitive (95.4%) but poorly specific (16.5%) for predicting parasitaemia. The inclusion of other symptoms reduced the sensitivity to below 85%, while specificity remained low. The axillary temperature was poorly predictive. ICT tests achieved high sensitivity (97.9%) but many cases indicated as positive by ICT tests were negative by microscopy. Further analysis of these cases in Trial I indicated that ICT tests were detecting low-level parasitaemias missed by microscopy, and that local microscopy had poor accuracy. ICT tests were well accepted and accurately performed by barangay health workers. CONCLUSION: These tests meet a strong desire in the community for blood-based diagnosis and may increase the compliance and treatment-seeking behaviour of patients. PMID:11693975

  10. Large, horizontal-axis wind turbines

    NASA Technical Reports Server (NTRS)

    Linscott, B. S.; Perkins, P.; Dennett, J. T.

    1984-01-01

    Development of the technology for safe, reliable, environmentally acceptable large wind turbines that have the potential to generate a significant amount of electricity at costs competitive with conventional electric generating systems are presented. In addition, these large wind turbines must be fully compatible with electric utility operations and interface requirements. There are several ongoing large wind system development projects and applied research efforts directed toward meeting the technology requirements for utility applications. Detailed information on these projects is provided. The Mod-O research facility and current applied research effort in aerodynamics, structural dynamics and aeroelasticity, composite and hybrid composite materials, and multiple system interaction are described. A chronology of component research and technology development for large, horizontal axis wind turbines is presented. Wind characteristics, wind turbine economics, and the impact of wind turbines on the environment are reported. The need for continued wind turbine research and technology development is explored. Over 40 references are sited and a bibliography is included.

  11. Impact of service provision platforms on maternal and newborn health in conflict areas and their acceptability in Pakistan: a systematic review.

    PubMed

    Lassi, Zohra S; Aftab, Wafa; Ariff, Shabina; Kumar, Rohail; Hussain, Imtiaz; Musavi, Nabiha B; Memon, Zahid; Soofi, Sajid B; Bhutta, Zulfiqar A

    2015-01-01

    Various models and strategies have been implemented over the years in different parts of the world to improve maternal and newborn health (MNH) in conflict affected areas. These strategies are based on specific needs and acceptability of local communities. This paper has undertaken a systematic review of global and local (Pakistan) information from conflict areas on platforms of health service provision in the last 10 years and information on acceptability from local stakeholders on effective models of service delivery; and drafted key recommendations for improving coverage of health services in conflict affected areas. The literature search revealed ten studies that described MNH service delivery platforms. The results from the systematic review showed that with utilisation of community outreach services, the greatest impacts were observed in skilled birth attendance and antenatal consultation rates. Facility level services, on the other hand, showed that labour room services for an internally displaced population (IDP) improved antenatal care coverage, contraceptive prevalence rate and maternal mortality. Consultative meetings and discussions conducted in Quetta and Peshawar (capitals of conflict affected provinces) with relevant stakeholders revealed that no systematic models of MNH service delivery, especially tailored for conflict areas, are available. During conflict, even previously available services and infrastructure suffered due to various barriers specific to times of conflict and unrest. A number of barriers that hinder MNH services were discussed. Suggestions for improving MNH services in conflict areas were also laid down by participants. The review identified some important steps that can be undertaken to mitigate the effects of conflict on MNH services, which include: improve provision and access to infrastructure and equipment; development and training of healthcare providers; and advocacy at different levels for free access to healthcare

  12. Affordability, availability and acceptability barriers to health care for the chronically ill: Longitudinal case studies from South Africa

    PubMed Central

    Goudge, Jane; Gilson, Lucy; Russell, Steven; Gumede, Tebogo; Mills, Anne

    2009-01-01

    Background There is an increasing burden of chronic illness in low and middle income countries, driven by TB/HIV, as well as non-communicable diseases. Few health systems are organized to meet the needs of chronically ill patients, and patients' perspectives on the difficulties of accessing care need to be better understood, particularly in poor resourced settings, to achieve this end. This paper describes the experience of poor households attempting to access chronic care in a rural area of South Africa. Methods A household survey (n = 1446 individuals) was combined with qualitative longitudinal research that followed 30 case study households over 10 months. Illness narratives and diaries provided descriptive textual data of household interactions with the health system. Results In the survey 74% of reported health problems were 'chronic', 48% of which had no treatment action taken in the previous month. Amongst the case study households, of the 34 cases of chronic illness, only 21 (62%) cases had an allopathic diagnosis and only 12 (35%) were receiving regular treatment. Livelihoods exhausted from previous illness and death, low income, and limited social networks, prevented consultation with monthly expenditure for repeated consultations as high as 60% of income. Interrupted drug supplies, insufficient clinical services at the clinic level necessitating referral, and a lack of ambulances further hampered access to care. Poor provider-patient interaction led to inadequate understanding of illness, inappropriate treatment action, 'healer shopping', and at times a break down in cooperation, with the patient 'giving up' on the public health system. However, productive patient-provider interactions not only facilitated appropriate treatment action but enabled patients to justify their need for financial assistance to family and neighbours, and so access care. In addition, patients and their families with understanding of a disease became a community resource drawn on

  13. Are Text Messages a Feasible and Acceptable Way to Reach Female Entertainment Workers in Cambodia with Health Messages? A Cross-Sectional Phone Survey

    PubMed Central

    2016-01-01

    Background Despite great achievements in reducing the prevalence of HIV, eliminating new HIV infections remains a challenge in Cambodia. Entertainment venues such as restaurants, karaoke bars, beer gardens, cafes, pubs, and massage parlors are now considered important venues for HIV prevention efforts and other health outreach interventions. Objective The purpose of this study was to explore phone use and texting practices of female entertainment workers (FEWs) in order to determine if text messaging is a feasible and acceptable way to link FEWs to health services. Methods This cross-sectional phone survey was conducted in May 2015 with 97 FEWs aged 18–35 years and currently working at an entertainment venue in Phnom Penh. Results Of the 96 respondents, 51% reported sending text messages daily; of them, 47% used Khmer script and 45% used Romanized Khmer. Younger FEWs were more likely to report daily texting (P<.001). Most FEWs (98%) in this study reported feeling comfortable receiving private health messages despite the fact that 39% were sharing their phone with others. Younger FEWs were less likely to share their phone with others (P=.02). Of all of the FEWs, 47% reported owning a smartphone, and younger women were more likely to own a smartphone than were older women (P=.08). Conclusions The findings from this study support the development of mHealth interventions targeting high-risk groups in urban areas of Cambodia. Our data suggest that mHealth interventions using texting may be a feasible way of reaching FEWs in Phnom Penh. PMID:27207374

  14. Turbine design review text

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Three-volume publication covers theoretical, design, and performance aspects of turbines. Volumes cover thermodynamic and fluid-dynamic concepts, velocity diagram design, turbine blade aerodynamic design, turbine energy losses, supersonic turbines, radial-inflow turbines, turbine cooling, and aerodynamic performance testing.

  15. Introducing single dose liposomal amphotericin B for the treatment of visceral leishmaniasis in rural bangladesh: feasibility and acceptance to patients and health staff.

    PubMed

    Maintz, Eva-Maria; Hassan, Mahbub; Huda, M Mamun; Ghosh, Debashis; Hossain, Md Shakhawat; Alim, Abdul; Kroeger, Axel; Arana, Byron; Mondal, Dinesh

    2014-01-01

    Background. For the treatment of visceral leishmaniasis in Bangladesh, single dose liposomal amphotericin B (ambisome) is supposed to be the safest and most effective treatment. Specific needs for application and storage raise questions about feasibility of its implementation and acceptance by patients and health staff. Methods. The study was carried out in the most endemic district of Bangladesh. Study population includes patients treated with ambisome or miltefosine, hospital staff, and a director of the national visceral leishmaniasis program. Study methods include direct observation (subdistrict hospitals), open interviews (heath staff and program personnel), structured questionnaires, and focus group discussions (patients). Results. Politicalcommitment for ambisome is strong; the general hospital infrastructure favours implementation but further strengthening is required, particularly for drug storage below 25°C (refrigerators), back-up energy (fuel for generators), and supplies for ambisome administration (like 5% dextrose solution). Ambisome created high satisfaction in patients and hospital staff, less adverse events, and less income loss for patients compared to miltefosine. Conclusions. High political commitment, general capacities of subdistrict hospitals, and high acceptability favour the implementation of ambisome treatment in Bangladesh. However, strengthening of the infrastructure and uninterrupted supplies of essential accessories is mandatory before introducing sLAB in Bangladesh. PMID:24578710

  16. Challenges for the sexual health and social acceptance of men who have sex with men in Nigeria.

    PubMed

    Allman, Dan; Adebajo, Sylvia; Myers, Ted; Odumuye, Oludare; Ogunsola, Sade

    2007-01-01

    Little research exists regarding men who have sex with men and sexual risk in Nigeria. Prior to the implementation of a targeted HIV/STI prevalence study, structured focus groups incorporating anonymous questionnaires were conducted with members of this population in secure locations in Nigeria. A purposive sample of men was recruited by word-of-mouth. Five focus groups were conducted with a total of 58 men. Mean age was 27 years (range 16-58); 60% had post-secondary education; 56% were employed full or part-time; 83% were Christian; 16% were Muslim; 66% self-identified as bisexual; 31% as homosexual. Participants' experiences were diverse, with ethnic, religious and class distinctions strongly structuring sexual expression. Same-sex community networks were hidden, with social activities taking place in non-commercial, private venues. Socially ostracized by culture, religion, and political will, the risks embodied within same-sex activity are high. For Nigeria--a nation culturally rich and religiously devout--the implications for public health policy are complex. However, these research findings suggest that immediate action is vital to mitigate the impacts of HIV and other STIs. PMID:17364723

  17. Assessing the value of and contextual and cultural acceptability of the Strength and Difficulties Questionnaire (SDQ) in evaluating mental health problems in HIV/AIDS affected children

    PubMed Central

    Skinner, Donald; Sharp, Carla; Marais, Lochner; Serekoane, Motsaathebe; Lenka, Molefi

    2015-01-01

    Background The Strengths and Difficulties Questionnaire (SDQ) is a robust, powerful and internationally recognised diagnostic screening tool for emotional and behaviour problems among children, with the particular advantage that it can be used by non-health professionals. This makes it useful in a South African context characterized by shortages of professional mental health carers. However the cultural and contextual acceptability and potential uses of the SDQ have not yet been examined in the South African context. Methods The aim of the current study was to evaluate the acceptability of the SDQ in a Sesotho speaking area of South Africa. As part of a larger study to standardise the SDQ for use among Sotho speakers, teachers were asked to use the tool to assess learners in their class. Ten teachers were then asked to write a report on their experience of the SDQ and how useful and applicable they found it for their school setting. These findings were discussed at two later meetings with larger groupings of teachers. Reports were analysed using a modified contextualised interpretative content analysis method. Results Teachers found the SDQ very useful in the classroom and easy to administer and understand. They found it contextually relevant and particularly useful in gaining an understanding of the learners and the challenges that learners were facing. It further allowed them to differentiate between scholastic and emotional problems, assisting them in developing relationships with the pupils and facilitating accurate referrals. There were very few concerns raised, with the major problem being that it was difficult to assess items concerning contexts outside of the school setting. The teachers expressed interest in obtaining further training in the interpretation of the SDQ and a greater understanding of diagnostic labels so as to assist their learners. Conclusion The SDQ was found to be acceptable and useful in the context of this very disadvantaged community

  18. Wind turbine

    DOEpatents

    Cheney, Jr., Marvin C.

    1982-01-01

    A wind turbine of the type having an airfoil blade (15) mounted on a flexible beam (20) and a pitch governor (55) which selectively, torsionally twists the flexible beam in response to wind turbine speed thereby setting blade pitch, is provided with a limiter (85) which restricts unwanted pitch change at operating speeds due to torsional creep of the flexible beam. The limiter allows twisting of the beam by the governor under excessive wind velocity conditions to orient the blades in stall pitch positions, thereby preventing overspeed operation of the turbine. In the preferred embodiment, the pitch governor comprises a pendulum (65,70) which responds to changing rotor speed by pivotal movement, the limiter comprising a resilient member (90) which engages an end of the pendulum to restrict further movement thereof, and in turn restrict beam creep and unwanted blade pitch misadjustment.

  19. Development of the Lupus Interactive Navigator as an Empowering Web-Based eHealth Tool to Facilitate Lupus Management: Users Perspectives on Usability and Acceptability

    PubMed Central

    Neville, Carolyn; Da Costa, Deborah; Rochon, Murray; Peschken, Christine A; Pineau, Christian A; Bernatsky, Sasha; Keeling, Stephanie; Avina-Zubieta, Antonio; Lye, Elizabeth; Eng, Davy

    2016-01-01

    Background Systemic Lupus Erythematosus (SLE) is a serious, complex, and chronic illness. Similar to most other chronic illness states, there is great interest in helping persons with SLE engage in their disease management. Objective The objectives of this study were to (1) develop the Lupus Interactive Navigator (LIN), a web-based self-management program for persons with SLE, and (2) test the LIN for usability and acceptability. Methods The LIN development platform was based on the results of preliminary comprehensive needs assessments and adapted from the Oncology Interactive Navigator, a web-based tool developed for persons with cancer. Medical researchers, writers, designers, and programmers worked with clinical experts and persons with SLE to develop content for the LIN. Usability and acceptability of the LIN was tested on individuals with SLE meeting American College of Rheumatology criteria, who were recruited from five Canadian SLE clinics. Participants were provided with access to the LIN and were asked to use it over a two-week period. Following the testing period, participants were contacted for a 30-minute telephone interview to assess usability and acceptability. Results The content for the LIN was subdivided into six primary information topics with interview videos featuring rheumatologists, allied health professionals, and persons with SLE. Usability and acceptability of the LIN was tested on 43 females with SLE. Of these, 37 (86%) completed telephone interviews. The average age was 43.6 (SD 15.9) years and disease duration averaged 14.1 (SD 10.8) years. Median time spent on LIN was 16.3 (interquartile range [IQR]:13.7, 53.5) minutes and median number of sessions was 2 (IQR: 1, 3). Overall, Likert ratings (0=strongly disagree; 7=strongly agree) of website usability and content were very high, with 75% scoring >6 out of 7 on all items. All participants agreed that LIN was easy to use, would recommend it to others with SLE, and would refer to it for

  20. Piezoelectric wind turbine

    NASA Astrophysics Data System (ADS)

    Kishore, Ravi Anant; Priya, Shashank

    2013-03-01

    In past few years, there has been significant focus towards developing small scale renewable energy based power sources for powering wireless sensor nodes in remote locations such as highways and bridges to conduct continuous health monitoring. These prior efforts have led to the development of micro-scale solar modules, hydrogen fuel cells and various vibration based energy harvesters. However, the cost effectiveness, reliability, and practicality of these solutions remain a concern. Harvesting the wind energy using micro-to-small scale wind turbines can be an excellent solution in variety of outdoor scenarios provided they can operate at few miles per hour of wind speed. The conventional electromagnetic generator used in the wind mills always has some cogging torque which restricts their operation above certain cut-in wind speed. This study aims to develop a novel piezoelectric wind turbine that utilizes bimorph actuators for electro-mechanical energy conversion. This device utilizes a Savonius rotor that is connected to a disk having magnets at the periphery. The piezoelectric actuators arranged circumferentially around the disk also have magnets at the tip which interacts with the magnetic field of the rotating disk and produces cyclical deflection. The wind tunnel experiments were conducted between 2-12 mph of wind speeds to characterize and optimize the power output of the wind turbine. Further, testing was conducted in the open environment to quantify the response to random wind gusts. An attempt was made towards integration of the piezoelectric wind turbine with the wireless sensor node.

  1. ADVANCED MONITORING TO IMPROVE COMBUSTION TURBINE/COMBINED CYCLE CT/(CC) RELIABILITY, AVAILABILITY AND MAINTAINABILITY (RAM)

    SciTech Connect

    Leonard Angello

    2003-09-30

    Power generators are concerned with the maintenance costs associated with the advanced turbines that they are purchasing. Since these machines do not have fully established operation and maintenance (O&M) track records, power generators face financial risk due to uncertain future maintenance costs. This risk is of particular concern, as the electricity industry transitions to a competitive business environment in which unexpected O&M costs cannot be passed through to consumers. These concerns have accelerated the need for intelligent software-based diagnostic systems that can monitor the health of a combustion turbine in real time and provide valuable information on the machine's performance to its owner/operators. Such systems would interpret sensor and instrument outputs, correlate them to the machine's condition, provide interpretative analyses, forward projections of servicing intervals, estimate remaining component life, and identify faults. EPRI, Impact Technologies, Boyce Engineering, and Progress Energy have teamed to develop a suite of intelligent software tools integrated with a diagnostic monitoring platform that will, in real time, interpret data to assess the ''total health'' of combustion turbines. The Combustion Turbine Health Management System (CTHM) will consist of a series of dynamic link library (DLL) programs residing on a diagnostic monitoring platform that accepts turbine health data from existing monitoring instrumentation. The CTHM system will be a significant improvement over currently available techniques for turbine monitoring and diagnostics. CTHM will interpret sensor and instrument outputs, correlate them to a machine's condition, provide interpretative analyses, project servicing intervals, and estimate remaining component life. In addition, it will enable real-time anomaly detection and diagnostics of performance and mechanical faults, enabling power producers to more accurately predict critical component remaining useful life and

  2. Sustainable Energy Solutions Task 2.0: Wind Turbine Reliability and Maintainability Enhancement through System-wide Structure Health Monitoring and Modifications to Rotating Components

    SciTech Connect

    Janet M Twomey, PhD

    2010-04-30

    EXECUTIVE SUMARRY An evaluation of nondestructive structural health monitoring methods was completed with over 132 documents, 37 specifically about wind turbines, summarized into a technology matrix. This matrix lists the technology, what can be monitored with this technology, and gives a short summary of the key aspects of the technology and its application. Passive and active acoustic emission equipment from Physical Acoustics Corp. and Acellent Technologies have been evaluated and selected for use in experimental state loading and fatigue tests of composite wind turbine blade materials. Acoustic Emission (AE) and Active Ultrasonic Testing (AUT), were applied to composite coupons with both simulated and actual damage. The results found that, while composites are more complicated in nature, compared to metallic structures, an artificial neural network analysis could still be used to determine damage. For the AE system, the failure mode could be determined (i.e. fiber breakage, delamination, etc.). The Acellent system has been evaluated to work well with composite materials. A test-rig for reliability testing of the rotating components was constructed. The research on the types of bearings used in the wind turbines indicated that in most of the designs, the main bearings utilized to support the shaft are cylindrical roller bearings. The accelerated degradation testing of a population of bearings was performed. Vibration and acoustic emission data was collected and analyzed in order to identify a representative degradation signal for each bearing to identify the initiation of the degradation process in the bearings. Afterwards, the RMS of the vibration signal from degradation initiation up to the end of the useful life of the bearing was selected to predict the remaining useful life of the bearing. This step included fitting Autoregressive Moving Average (ARMA) models to the degradation signals and approximating the probability distribution function (PDF) of

  3. Accepted scientific research works (abstracts).

    PubMed

    2014-01-01

    These are the 39 accepted abstracts for IAYT's Symposium on Yoga Research (SYR) September 24-24, 2014 at the Kripalu Center for Yoga & Health and published in the Final Program Guide and Abstracts. PMID:25645134

  4. A Mixed-Methods Study on the Acceptability of Using eHealth for HIV Prevention and Sexual Health Care Among Men Who Have Sex With Men in China

    PubMed Central

    Bien, Cedric H; Wei, Chongyi; Lo, Elaine J; Yang, Min; Tucker, Joseph D; Yang, Ligang; Meng, Gang; Hightow-Weidman, Lisa B

    2015-01-01

    Background Human immunodeficiency virus (HIV) infection disproportionately affects men who have sex with men (MSM). Over half of all HIV-positive MSM in China may not know their HIV status. Mobile phones and Web interventions (eHealth) are underutilized resources that show promise for supporting HIV education, testing, and linkage to care. Objective This mixed-methods study among MSM in China assessed technology utilization and eHealth acceptability for sexual health care. Methods We conducted in-depth interviews and an online survey. Qualitative analyses informed the development of the Internet survey, which was administered through two popular MSM websites. Bivariate and multivariate analysis assessed characteristics of MSM interested in eHealth for sexual health care. Results The qualitative sample included MSM across a range of ages, education, marital status, sexuality, and HIV testing experience. Qualitative findings included the importance of the Internet as the primary source of information about sexual health, HIV and other sexually transmitted diseases (STDs), use of the Internet to enable HIV testing opportunities by facilitating connections with both the gay community and health care providers, and mixed perceptions regarding the confidentiality of eHealth tools for sexual health. Among the Internet sample (N=1342), the average age was 30.6 years old, 82.81% (1098/1342) were single, and 53.42% (711/1331) had completed college. In the past 3 months, 38.66% (382/988) had condomless sex and 60.53% (805/1330) self-reported having ever tested for HIV. The majority of men owned computers (94.14%, 1220/1296) and mobile phones (92.32%, 1239/1342), which many had used to search for HIV/STD information and testing sites. In multivariate analysis, interest in using computers or mobile phones to support their sexual health care was associated with being a student, prior use of computers or mobile phones to search for general health information, prior use of

  5. An Overview of Prognosis Health Management Research at GRC for Gas Turbine Engine Structures With Special Emphasis on Deformation and Damage Modeling

    NASA Technical Reports Server (NTRS)

    Arnold, Steven M.; Goldberg, Robert K.; Lerch, Bradley A.; Saleeb, Atef F.

    2009-01-01

    Herein a general, multimechanism, physics-based viscoelastoplastic model is presented in the context of an integrated diagnosis and prognosis methodology which is proposed for structural health monitoring, with particular applicability to gas turbine engine structures. In this methodology, diagnostics and prognostics will be linked through state awareness variable(s). Key technologies which comprise the proposed integrated approach include 1) diagnostic/detection methodology, 2) prognosis/lifing methodology, 3) diagnostic/prognosis linkage, 4) experimental validation and 5) material data information management system. A specific prognosis lifing methodology, experimental characterization and validation and data information management are the focal point of current activities being pursued within this integrated approach. The prognostic lifing methodology is based on an advanced multi-mechanism viscoelastoplastic model which accounts for both stiffness and/or strength reduction damage variables. Methods to characterize both the reversible and irreversible portions of the model are discussed. Once the multiscale model is validated the intent is to link it to appropriate diagnostic methods to provide a full-featured structural health monitoring system.

  6. An Overview of Prognosis Health Management Research at Glenn Research Center for Gas Turbine Engine Structures With Special Emphasis on Deformation and Damage Modeling

    NASA Technical Reports Server (NTRS)

    Arnold, Steven M.; Goldberg, Robert K.; Lerch, Bradley A.; Saleeb, Atef F.

    2009-01-01

    Herein a general, multimechanism, physics-based viscoelastoplastic model is presented in the context of an integrated diagnosis and prognosis methodology which is proposed for structural health monitoring, with particular applicability to gas turbine engine structures. In this methodology, diagnostics and prognostics will be linked through state awareness variable(s). Key technologies which comprise the proposed integrated approach include (1) diagnostic/detection methodology, (2) prognosis/lifing methodology, (3) diagnostic/prognosis linkage, (4) experimental validation, and (5) material data information management system. A specific prognosis lifing methodology, experimental characterization and validation and data information management are the focal point of current activities being pursued within this integrated approach. The prognostic lifing methodology is based on an advanced multimechanism viscoelastoplastic model which accounts for both stiffness and/or strength reduction damage variables. Methods to characterize both the reversible and irreversible portions of the model are discussed. Once the multiscale model is validated the intent is to link it to appropriate diagnostic methods to provide a full-featured structural health monitoring system.

  7. HealthMpowerment.org: feasibility and acceptability of delivering an internet intervention to young Black men who have sex with men.

    PubMed

    Hightow-Weidman, Lisa B; Pike, Emily; Fowler, Beth; Matthews, Derrick M; Kibe, Jessica; McCoy, Regina; Adimora, Adaora A

    2012-01-01

    Young Black men who have sex with men (BMSM) are disproportionately affected by HIV/AIDS in the USA and continue to experience rapidly increasing HIV incidence. We designed a tailored, theory-based interactive HIV/STI prevention website for young BMSM, called HealthMpowerment.org (HMP) and conducted a small pilot trial comparing HMP to currently available HIV/STI websites. We present findings demonstrating feasibility and acceptability of delivering the intervention to the target population of young BMSM. Retention rates were 90% and 78% at one- and three-month follow-ups, respectively. Evaluation immediately after the intervention's completion revealed that participants who used the HMP website reported high levels of user satisfaction and interest and low levels of website difficulty and frustration. At the end of the intervention, there was a trend in increased behavioral intentions to use condoms and engage in preparatory condom use behaviors in the intervention group compared to the control group (p=0.10). We observed a reduction in mean scores on the CES-D scale among those in the intervention group that was not seen in the control group at the one-month follow-up, though this was not statistically significant. Feedback from exit interviews with study participants suggested that HMP is relevant to the prevention needs of young BMSM. Overall, the findings support the acceptability and feasibility of delivering this prevention program to a group that has few interventions despite bearing a significant burden of the epidemic. Future trials, combining Internet and mobile phone technologies, are planned to test HMP among larger and more diverse populations of young BMSM. PMID:22272759

  8. Rapid HIV Testing Is Highly Acceptable and Preferred among High-Risk Gay And Bisexual Men after Implementation in Sydney Sexual Health Clinics

    PubMed Central

    Conway, Damian P.; Guy, Rebecca; Davies, Stephen C; Couldwell, Deborah L.; McNulty, Anna; Smith, Don E.; Keen, Phillip; Cunningham, Philip; Holt, Martin

    2015-01-01

    Background Rapid HIV testing (RHT) is well established in many countries, but it is new in Australia. We assessed the acceptability of RHT and its associations among gay, bisexual and other men who have sex with men (GBM) after implementation of RHT in Sydney sexual health clinics. Methods GBM were invited to complete an acceptability questionnaire before and after provision of the result of finger-prick blood RHT, comparing their experience of RHT with conventional HIV testing (CHT) involving venipuncture. Logistic regression was used to assess associations between patient characteristics and the preference for RHT over CHT next time they tested for HIV. Results Of 1061 GBM who received non-reactive RHT results, 59% found RHT less stressful than CHT and 34% reported no difference, and 61% found RHT more comfortable than CHT and 26% reported no difference. Nearly all men were satisfied with RHT result delivery (99%) and the RHT process overall (99%). Most men (79%) preferred RHT for their next HIV test and this preference was stronger in men who were aged 35-44 years (adjusted odds ratio [AOR] 2.49, p<0.01), reported they would test more often if RHT was available (AOR 1.66, p=0.01), found returning for results annoying (AOR 1.67, p=0.01), and found RHT less stressful (AOR 2.37, p<0.01) and more comfortable (AOR 1.62, p=0.02) than CHT. Men concerned about the reliability of RHT were less than half as likely to prefer RHT for their next HIV test (AOR 0.44, p<0.01). Conclusions Most GBM preferred RHT to CHT next time and this preference was associated with finding RHT more convenient, more comfortable and less stressful than CHT. These findings suggest that in a clinic setting RHT should be considered to improve the patient experience and may potentially increase uptake and frequency of HIV testing. PMID:25898140

  9. Acceptability of a Clinician-Assisted Computerized Psychological Intervention for Comorbid Mental Health and Substance Use Problems: Treatment Adherence Data from a Randomized Controlled Trial

    PubMed Central

    2011-01-01

    Background Computer-delivered psychological treatments have great potential, particularly for individuals who cannot access traditional approaches. Little is known about the acceptability of computer-delivered treatment, especially among those with comorbid mental health and substance use problems. Objective The objective of our study was to assess the acceptability of a clinician-assisted computer-based (CAC) psychological treatment (delivered on DVD in a clinic-setting) for comorbid depression and alcohol or cannabis use problems relative to a therapist-delivered equivalent and a brief intervention control. Methods We compared treatment acceptability, in terms of treatment dropout/participation and therapeutic alliance, of therapist-delivered versus CAC psychological treatment. We randomly assigned 97 participants with current depression and problematic alcohol/cannabis use to three conditions: brief intervention (BI, one individual session delivered face to face), therapist-delivered (one initial face-to-face session plus 9 individual sessions delivered by a therapist), and CAC interventions (one initial face-to-face session plus 9 individual CAC sessions). Randomization occurred following baseline and provision of the initial session, and therapeutic alliance ratings were obtained from participants following completion of the initial session, and at sessions 5 and 10 among the therapist-delivered and CAC conditions. Results Treatment retention and attendance rates were equal between therapist-delivered and CAC conditions, with 51% (34/67) completing all 10 treatment sessions. No significant differences existed between participants in therapist-delivered and CAC conditions at any point in therapy on the majority of therapeutic alliance subscales. However, relative to therapist-delivered treatment, the subscale of Client Initiative was rated significantly higher among participants allocated to the BI (F2,54 = 4.86, P = .01) and CAC participants after session 5 (F

  10. Generic turbine design study. Final report

    SciTech Connect

    Not Available

    1993-06-01

    The purpose of Task 12, Generic Turbine Design Study was to develop a conceptual design of a combustion turbine system that would perform in a pressurized fluidized bed combustor (PFBC) application. A single inlet/outlet casing design that modifies the W251B12 combustion turbine to provide compressed air to the PFBC and accept clean hot air from the PFBC was developed. Performance calculations show that the net power output expected, at an inlet temperature of 59{degrees}F, is 20,250 kW.

  11. Approaches to acceptable risk

    SciTech Connect

    Whipple, C.

    1997-04-30

    Several alternative approaches to address the question {open_quotes}How safe is safe enough?{close_quotes} are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made.

  12. Mod-2 wind turbine system development. Volume 2: Detailed report

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Progress in the design, fabrication, and testing of a wind turbine system is reported. The development of the MOD-2 wind turbine through acceptance testing and initial operational evaluation is documented. The MOD-2 project intends to develop early commercialization of wind energy. The first wind turbine farm (three MOD-2 units) are now being operated at the Bonneville Power Administration site near Goldendale, Washington.

  13. Feasibility, Acceptability, and Initial Findings from a Community-Based Cultural Mental Health Intervention for American Indian Youth and Their Families.

    PubMed

    Goodkind, Jessica; LaNoue, Marianna; Lee, Christopher; Freeland, Lance; Freund, Rachel

    2012-05-01

    Through a CBPR partnership, university and American Indian (AI) tribal members developed and tested Our Life intervention to promote mental health of AI youth and their families by addressing root causes of violence, trauma, and substance abuse. Based on premises that well-being is built on a foundation of traditional cultural beliefs and practices, and that it requires a process of healing and understanding, the 6-month intervention had four components: 1) recognizing/healing historical trauma; 2) reconnecting to traditional culture; 3) parenting/social skill-building; and 4) strengthening family relationships through equine-assisted activities. Feasibility, acceptability, appropriateness, and preliminary outcomes were examined in a mixed-method within-group design. Engagement and retention were challenging, suggesting that families faced numerous barriers to participation. Youth who completed the program experienced significant increases in cultural identity, self-esteem, positive coping strategies, quality of life, and social adjustment. Qualitative data supported these findings and suggested additional positive effects. PMID:25414529

  14. HPV knowledge, vaccine acceptance, and vaccine series completion among female entertainment and sex workers in Phnom Penh, Cambodia: the Young Women's Health Study

    PubMed Central

    Wadhera, Priya; Evans, Jennifer L; Stein, Ellen; Gandhi, Monica; Couture, Marie-Claude; Sansothy, Neth; Sichan, Keo; Maher, Lisa; Kaldor, John; Page, Kimberly

    2015-01-01

    Human papillomavirus (HPV) is a common sexually transmitted infection (STI) and the causative agent for cervical cancer, a frequently occurring malignant disease among women in developing countries. We assessed HPV awareness prior to the delivery of a brief information and education intervention, and HPV vaccine provision to female entertainment and sex workers (N=220). At baseline, only 23.6% of women had heard of HPV. Following the educational intervention, 90% answered all the HPV knowledge questions correctly. Of 192 participants attending the first quarterly cohort visit where vaccine was offered, 149 (78%) were eligible for vaccination; HIV-positive (n=32) and pregnant (n=11) women were excluded. Acceptance of vaccine among eligible women was universal, and 79.2% completed the three-dose vaccination series. Women who reported use of amphetamine type stimulants (ATS) had significantly and independently lower odds of vaccine completion (Adjusted OR 0.24; 95% CI 0.08, 0.69). New pregnancies also had an impact on vaccine completion: 5.4% (8/149 5.4%) who started the series had to stop due to new pregnancy. Results demonstrate the effectiveness of a simple education intervention designed to increase HPV knowledge and the feasibility of successful HPV vaccine in a population that is often difficult to engage in preventive health care. PMID:25505042

  15. The Community Liaison Program: a health education pilot program to increase minority awareness of HIV and acceptance of HIV vaccine trials.

    PubMed

    Kelley, R T; Hannans, A; Kreps, G L; Johnson, K

    2012-08-01

    This paper describes a 16-month health education pilot program based on diffusion of innovation and social network theories. The program was implemented by volunteer community liaisons for the purposes of increasing awareness of and support for HIV vaccine research in minority populations. This theoretically driven pilot program allowed the liaisons to integrate delivery of the HIV vaccine research messages created for the program into their existing activities and routines. Through training in participatory engagement, volunteers were able to tailor and adapt an HIV prevention message for their communities. Process evaluation data showed that the acceptance of participatory engagement and HIV vaccine message dissemination far exceeded expectations. The anticipated number of community members to receive the message was estimated at 500 with 10 volunteer liaisons or 50 per person. However, the actual number of people reached was 644, with only 7 volunteer liaisons, or an average of 92 persons per liaison, almost double the original number. Further research is recommended to analyze the specific behavioral changes that can come from the use of social networks in HIV vaccine research awareness within minority populations. PMID:22327809

  16. Human papillomavirus knowledge, vaccine acceptance, and vaccine series completion among female entertainment and sex workers in Phnom Penh, Cambodia: the Young Women's Health Study.

    PubMed

    Wadhera, Priya; Evans, Jennifer L; Stein, Ellen; Gandhi, Monica; Couture, Marie-Claude; Sansothy, Neth; Sichan, Keo; Maher, Lisa; Kaldor, John; Page, Kimberly; Kien

    2015-10-01

    Human papillomavirus is a common sexually transmitted infection and the causative agent for cervical cancer, a frequently occurring malignant disease among women in developing countries. We assessed human papillomavirus awareness prior to the delivery of a brief information and education intervention, and human papillomavirus vaccine provision to female entertainment and sex workers (N = 220). At baseline, only 23.6% of women had heard of human papillomavirus. Following the educational intervention, 90% answered all the human papillomavirus knowledge questions correctly. Of 192 participants attending the first quarterly cohort visit where vaccine was offered, 149 (78%) were eligible for vaccination; HIV-positive (n = 32) and pregnant (n = 11) women were excluded. Acceptance of vaccine among eligible women was universal, and 79.2% completed the three-dose vaccination series. Women who reported use of amphetamine-type stimulants had significantly and independently lower odds of vaccine completion (adjusted odds ratio [AOR] 0.24; 95% confidence interval [CI] 0.08, 0.69). New pregnancies also had an impact on vaccine completion: 5.4% (8/149 5.4%) who started the series had to stop due to new pregnancy. Results demonstrate the effectiveness of a simple education intervention designed to increase human papillomavirus knowledge and the feasibility of successful human papillomavirus vaccine in a population that is often difficult to engage in preventive health care. PMID:25505042

  17. Single Rotor Turbine

    DOEpatents

    Platts, David A.

    2004-10-26

    A rotor for use in turbine applications has a centrifugal compressor having axially disposed spaced apart fins forming passages and an axial turbine having hollow turbine blades interleaved with the fins and through which fluid from the centrifugal compressor flows.

  18. Kshara application for turbinate hypertrophy

    PubMed Central

    Kotrannavar, Vijay Kumar S.; Angadi, Savita S.

    2013-01-01

    Nasapratinaha (nasal obstruction) is a commonly encountered disease in clinical practice. It is one of the nasal disorders, explained in Ayurveda, having nasal obstruction leading to difficulty in breathing as the main cardinal feature. In contemporary science, this condition can be correlated with various diseases such as turbinate hypertrophy, deviated nasal septum, nasal mass, mucosal congestion, allergic rhinitis, and others; among which turbinate hypertrophy is a common cause. Turbinate hypertrophy can be treated with surgical and medical methods. The medical treatment has limitation for prolonged use because of health purpose, surgical approaches too have failed to achieve desired results in turbinate hypertrophy due to complications and high recurrence rate. The medical and surgical managements have their own limitations, merits, and demerits like synechiae formation, rhinitis sicca, severe bleeding, or osteonecrosis of the turbinate bone A parasurgical treatment explained in Ayurveda, known as kshara pratisarana, which is a minimal invasive and precise procedure for this ailment, tried to overcome this problem. ‘Kshara Karma’ is a popular treatment modality in Ayurveda, which has been advocated in disorders of nose like arbuda (tumor) and adhimamsa (muscular growth). Clinical observation has shown its effectiveness in the management of turbinate hypertrophy. A case report of 45-year-old male who presented with complaints of frequent nasal obstruction, nasal discharge, discomfort in nose, and headache; and diagnosed as turbinate hypertrophy has been presented here. The patient was treated with one application of Kshara over the turbinates. The treatment was effective and no recurrence was noticed in the follow up. PMID:24459392

  19. Quantitative damage detection and sparse sensor array optimization of carbon fiber reinforced resin composite laminates for wind turbine blade structural health monitoring.

    PubMed

    Li, Xiang; Yang, Zhibo; Chen, Xuefeng

    2014-01-01

    The active structural health monitoring (SHM) approach for the complex composite laminate structures of wind turbine blades (WTBs), addresses the important and complicated problem of signal noise. After illustrating the wind energy industry's development perspectives and its crucial requirement for SHM, an improved redundant second generation wavelet transform (IRSGWT) pre-processing algorithm based on neighboring coefficients is introduced for feeble signal denoising. The method can avoid the drawbacks of conventional wavelet methods that lose information in transforms and the shortcomings of redundant second generation wavelet (RSGWT) denoising that can lead to error propagation. For large scale WTB composites, how to minimize the number of sensors while ensuring accuracy is also a key issue. A sparse sensor array optimization of composites for WTB applications is proposed that can reduce the number of transducers that must be used. Compared to a full sixteen transducer array, the optimized eight transducer configuration displays better accuracy in identifying the correct position of simulated damage (mass of load) on composite laminates with anisotropic characteristics than a non-optimized array. It can help to guarantee more flexible and qualified monitoring of the areas that more frequently suffer damage. The proposed methods are verified experimentally on specimens of carbon fiber reinforced resin composite laminates. PMID:24763210

  20. Quantitative Damage Detection and Sparse Sensor Array Optimization of Carbon Fiber Reinforced Resin Composite Laminates for Wind Turbine Blade Structural Health Monitoring

    PubMed Central

    Li, Xiang; Yang, Zhibo; Chen, Xuefeng

    2014-01-01

    The active structural health monitoring (SHM) approach for the complex composite laminate structures of wind turbine blades (WTBs), addresses the important and complicated problem of signal noise. After illustrating the wind energy industry's development perspectives and its crucial requirement for SHM, an improved redundant second generation wavelet transform (IRSGWT) pre-processing algorithm based on neighboring coefficients is introduced for feeble signal denoising. The method can avoid the drawbacks of conventional wavelet methods that lose information in transforms and the shortcomings of redundant second generation wavelet (RSGWT) denoising that can lead to error propagation. For large scale WTB composites, how to minimize the number of sensors while ensuring accuracy is also a key issue. A sparse sensor array optimization of composites for WTB applications is proposed that can reduce the number of transducers that must be used. Compared to a full sixteen transducer array, the optimized eight transducer configuration displays better accuracy in identifying the correct position of simulated damage (mass of load) on composite laminates with anisotropic characteristics than a non-optimized array. It can help to guarantee more flexible and qualified monitoring of the areas that more frequently suffer damage. The proposed methods are verified experimentally on specimens of carbon fiber reinforced resin composite laminates. PMID:24763210

  1. Probabilistic Analysis of Gas Turbine Field Performance

    NASA Technical Reports Server (NTRS)

    Gorla, Rama S. R.; Pai, Shantaram S.; Rusick, Jeffrey J.

    2002-01-01

    A gas turbine thermodynamic cycle was computationally simulated and probabilistically evaluated in view of the several uncertainties in the performance parameters, which are indices of gas turbine health. Cumulative distribution functions and sensitivity factors were computed for the overall thermal efficiency and net specific power output due to the thermodynamic random variables. These results can be used to quickly identify the most critical design variables in order to optimize the design, enhance performance, increase system availability and make it cost effective. The analysis leads to the selection of the appropriate measurements to be used in the gas turbine health determination and to the identification of both the most critical measurements and parameters. Probabilistic analysis aims at unifying and improving the control and health monitoring of gas turbine aero-engines by increasing the quality and quantity of information available about the engine's health and performance.

  2. Mod-2 wind turbine system development. Volume 1: Executive summary

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The development of the MOD-2 wind turbine through acceptance testing and initial operational evaluation is documented. Pitch control hydraulic system, yaw control system, drive train, electrical power station, control system, operations and maintenance experience, and availability are discussed.

  3. Plan Turbines 3 & 4, Side View Turbines ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Plan - Turbines 3 & 4, Side View - Turbines 3 & 4, Section A-A - American Falls Water, Power & Light Company, Island Power Plant, Snake River, below American Falls Dam, American Falls, Power County, ID

  4. Wind turbine

    SciTech Connect

    Traudt, R.F.

    1986-12-30

    This patent describes a wind turbine device having a main rotatable driven shaft, elongated blades operatively mounted on the main shaft for unitary rotation with the main shaft. The blade extends substantially radially away from the main shaft and is adapted to fold downwind under naturally occurring forces and simultaneously feather in direct response to the folding movement. A means associated with the blades is included for increasing the rate of fold relative to the rate of feather as the speed of rotation increases.

  5. Respondent-driven sampling to assess mental health outcomes, stigma and acceptance among women raising children born from sexual violence-related pregnancies in eastern Democratic Republic of Congo

    PubMed Central

    Scott, Jennifer; Rouhani, Shada; Greiner, Ashley; Albutt, Katherine; Kuwert, Philipp; Hacker, Michele R; VanRooyen, Michael; Bartels, Susan

    2015-01-01

    Objectives Assess mental health outcomes among women raising children from sexual violence-related pregnancies (SVRPs) in eastern Democratic Republic of Congo and stigma toward and acceptance of women and their children. Design Participants were recruited using respondent-driven sampling. Setting Bukavu, Democratic Republic of Congo in 2012. Participants 757 adult women raising children from SVRPs were interviewed. A woman aged 18 and older was eligible for the study if she self-identified as a sexual violence survivor since the start of the conflict (∼1996), conceived an SVRP, delivered a liveborn child and was currently raising the child. A woman was ineligible for the study if the SVRP ended with a spontaneous abortion or fetal demise or the child was not currently living or in the care of the biological mother. Intervention Trained female Congolese interviewers verbally administered a quantitative survey after obtaining verbal informed consent. Outcome measures Symptom criteria for major depressive disorder, post-traumatic stress disorder, anxiety and suicidality were assessed, as well as stigma toward the woman and her child. Acceptance of the woman and child from the spouse, family and community were analysed. Results 48.6% met symptom criteria for major depressive disorder, 57.9% for post-traumatic stress disorder, 43.3% for anxiety and 34.2% reported suicidality. Women who reported stigma from the community (38.4%) or who reported stigma toward the child from the spouse (42.9%), family (31.8%) or community (38.1%) were significantly more likely to meet symptom criteria for most mental health disorders. Although not statistically significant, participants who reported acceptance and acceptance of their children from the spouse, family and community were less likely to meet symptom criteria. Conclusions Women raising children from SVRPs experience symptoms of mental health disorders. Programming addressing stigma and acceptance following sexual violence may

  6. The 200-kilowatt wind turbine project

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The three 200 kilowatt wind turbines described, compose the first of three separate systems. Proposed wind turbines of the two other systems, although similar in design, are larger in both physical size and rated power generation. The overall objective of the project is to obtain early operation and performance data while gaining initial experience in the operation of large, horizontal-axis wind turbines in typical utility environments. Several of the key issues addressed include the following: (1) impact of the variable power output (due to varying wind speeds) on the utility grid (2) compatibility with utility requirements (voltage and frequency control of generated power) (3) demonstration of unattended, fail-safe operation (4) reliability of the wind turbine system (5) required maintenance and (6) initial public reaction and acceptance.

  7. Laser cladding and inspection for life extension of turbine blades

    SciTech Connect

    Failor, J.

    1995-03-01

    Turbine blades used in commercial aviation require very close tolerances in order to maintain engine performance. Blade tip clearances and shroud gap limits are held to within several thousandths, keeping air bypasses and vibration to a minimum. At both the maintenance and overhaul levels, components are inspected to serviceable guidelines and turbine blades that exceed acceptable service limits were, until recently, removed and tagged unserviceable or discarded. Laser cladding offers a cost saving alternative to the replacement of unserviceable turbine blades. With today`s automation systems and an effective quality control procedure in place this process can produce acceptable yields.

  8. The ethical and practical aspects of acceptance and universal patient acceptance.

    PubMed

    Corsino, Bruce V; Patthoff, Donald E

    2006-11-01

    "Acceptance" is an often presupposed, hidden core value and ethic focused on how dental and other health practitioners first accept people as possible patients. The three basic styles of patient acceptance are random, selective, and universal. Reduced public access to care results from the practice of random and selective acceptance. Only universal acceptance creates a potential pathway for improved access to care. The notion of Universal Patient Acceptance (UPA) is discussed here as one kind of applied ethical tool or clinical practice that allows for the ethic of acceptance to be more effectively pursued in daily practice. We suggest that health providers falsely surmise that they already understand and practice Universal Patient Acceptance. That myth and perspective are partly what keeps Acceptance hidden as an ethic and overlooked as a potential way to foster dialogue and indirectly promote better access to care. Without Universal Patient Acceptance, dental and health providers will continue to silently engage in practice patterns that adversely affect public access to care. The actual benefits of Universal Patient Acceptance are the subject of ongoing review and debate. Whatever those benefits might be will not likely be realized until Acceptance and Universal Patient Acceptance are included as part of dental and other health professional codes of ethics and training curricula. That is what we argue for here. PMID:17106034

  9. "I Learned to Accept Every Part of Myself": The Transformative Impact of a Theatre-Based Sexual Health and HIV Prevention Programme

    ERIC Educational Resources Information Center

    Grewe, Mary E.; Taboada, Arianna; Dennis, Alexis; Chen, Elizabeth; Stein, Kathryn; Watson, Sable; Barrington, Clare; Lightfoot, Alexandra F.

    2015-01-01

    Theatre-based interventions have been used in health promotion with young people to address HIV and sexual health. In this study, we explored the experience of undergraduate student performers participating in a theatre-based HIV prevention and sexual health education intervention for high school students in the USA. Undergraduate students…

  10. The forecast of the development of the market for gas turbine equipment in the years 2013-2021 (review)

    NASA Astrophysics Data System (ADS)

    Goncharov, V. V.

    2013-09-01

    The data are given, according to which, 12521 power-generating gas turbines will be manufactured in 2011-2021. More than 32% of these turbines will be made by Solar, while products made by General Electric will account for 41% (in terms of money). Servicing of gas turbine units provided by firms manufacturing them will gain wide acceptance.

  11. Wind turbine sound power measurements.

    PubMed

    Keith, Stephen E; Feder, Katya; Voicescu, Sonia A; Soukhovtsev, Victor; Denning, Allison; Tsang, Jason; Broner, Norm; Richarz, Werner; van den Berg, Frits

    2016-03-01

    This paper provides experimental validation of the sound power level data obtained from manufacturers for the ten wind turbine models examined in Health Canada's Community Noise and Health Study (CNHS). Within measurement uncertainty, the wind turbine sound power levels measured using IEC 61400-11 [(2002). (International Electrotechnical Commission, Geneva)] were consistent with the sound power level data provided by manufacturers. Based on measurements, the sound power level data were also extended to 16 Hz for calculation of C-weighted levels. The C-weighted levels were 11.5 dB higher than the A-weighted levels (standard deviation 1.7 dB). The simple relationship between A- and C- weighted levels suggests that there is unlikely to be any statistically significant difference between analysis based on either C- or A-weighted data. PMID:27036281

  12. Wind Turbines Benefit Crops

    SciTech Connect

    Takle, Gene

    2010-01-01

    Ames Laboratory associate scientist Gene Takle talks about research into the effect of wind turbines on nearby crops. Preliminary results show the turbines may have a positive effect by cooling and drying the crops and assisting with carbon dioxide uptake.

  13. Wind Turbines Benefit Crops

    ScienceCinema

    Takle, Gene

    2013-03-01

    Ames Laboratory associate scientist Gene Takle talks about research into the effect of wind turbines on nearby crops. Preliminary results show the turbines may have a positive effect by cooling and drying the crops and assisting with carbon dioxide uptake.

  14. Open-Cycle Gas Turbine/Steam Turbine Combined Cycles with synthetic fuels from coal

    NASA Technical Reports Server (NTRS)

    Shah, R. P.; Corman, J. C.

    1977-01-01

    The Open-Cycle Gas Turbine/Steam Turbine Combined Cycle can be an effective energy conversion system for converting coal to electricity. The intermediate step in this energy conversion process is to convert the coal into a fuel acceptable to a gas turbine. This can be accomplished by producing a synthetic gas or liquid, and by removing, in the fuel conversion step, the elements in the fuel that would be harmful to the environment if combusted. In this paper, two open-cycle gas turbine combined systems are evaluated: one employing an integrated low-Btu gasifier, and one utilizing a semi-clean liquid fuel. A consistent technical/economic information base is developed for these two systems, and is compared with a reference steam plant burning coal directly in a conventional furnace.

  15. Sliding vane geometry turbines

    DOEpatents

    Sun, Harold Huimin; Zhang, Jizhong; Hu, Liangjun; Hanna, Dave R

    2014-12-30

    Various systems and methods are described for a variable geometry turbine. In one example, a turbine nozzle comprises a central axis and a nozzle vane. The nozzle vane includes a stationary vane and a sliding vane. The sliding vane is positioned to slide in a direction substantially tangent to an inner circumference of the turbine nozzle and in contact with the stationary vane.

  16. Large wind turbine generators

    NASA Technical Reports Server (NTRS)

    Thomas, R. L.; Donovon, R. M.

    1978-01-01

    The development associated with large wind turbine systems is briefly described. The scope of this activity includes the development of several large wind turbines ranging in size from 100 kW to several megawatt levels. A description of the wind turbine systems, their programmatic status and a summary of their potential costs is included.

  17. Acceptability and feasibility of mHealth and community-based directly observed antiretroviral therapy to prevent mother-to-child HIV transmission in South African pregnant women under Option B+: an exploratory study

    PubMed Central

    Nachega, Jean B; Skinner, Donald; Jennings, Larissa; Magidson, Jessica F; Altice, Frederick L; Burke, Jessica G; Lester, Richard T; Uthman, Olalekan A; Knowlton, Amy R; Cotton, Mark F; Anderson, Jean R; Theron, Gerhard B

    2016-01-01

    Objective To examine the acceptability and feasibility of mobile health (mHealth)/short message service (SMS) and community-based directly observed antiretroviral therapy (cDOT) as interventions to improve antiretroviral therapy (ART) adherence for preventing mother-to-child human immunodeficiency virus (HIV) transmission (PMTCT). Design and methods A mixed-method approach was used. Two qualitative focus group discussions with HIV-infected pregnant women (n=20) examined the acceptability and feasibility of two ART adherence interventions for PMTCT: 1) SMS text messaging and 2) patient-nominated cDOT supporters. Additionally, 109 HIV-infected, pregnant South African women (18–30 years old) receiving PMTCT services under single-tablet antiretroviral therapy regimen during pregnancy and breastfeeding and continuing for life (“Option B+”) were interviewed about mobile phone access, SMS use, and potential treatment supporters. Setting A community primary care clinic in Cape Town, South Africa. Participants HIV-infected pregnant women. Main outcomes Acceptability and feasibility of mHealth and cDOT interventions. Results Among the 109 women interviewed, individual mobile phone access and SMS use were high (>90%), and 88.1% of women were interested in receiving SMS ART adherence support messages such as reminders, motivation, and medication updates. Nearly all women (95%) identified at least one person close to them to whom they had disclosed their HIV status and would nominate as a cDOT supporter. Focus group discussions revealed that cDOT supporters and adherence text messages were valued, but some concerns regarding supporter time availability and risk of unintended HIV status disclosure were expressed. Conclusion mHealth and/or cDOT supporter as interventions to improve ART adherence are feasible in this setting. However, safe HIV status disclosure to treatment supporters and confidentiality of text messaging content about HIV and ART were deemed crucial. PMID

  18. Turbine Imaging Technology Assessment

    SciTech Connect

    Moursund, Russell A.; Carlson, Thomas J.

    2004-12-31

    The goal of this project was to identify and evaluate imaging alternatives for observing the behavior of juvenile fish within an operating Kaplan turbine unit with a focus on methods to quantify fish injury mechanisms inside an operating turbine unit. Imaging methods are particularly needed to observe the approach and interaction of fish with turbine structural elements. This evaluation documents both the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. The information may be used to acquire the scientific knowledge to make structural improvements and create opportunities for industry to modify turbines and improve fish passage conditions.

  19. ‘I learned to accept every part of myself’: the transformative impact of a theatre-based sexual health and HIV prevention programme

    PubMed Central

    Grewe, Mary E.; Taboada, Arianna; Dennis, Alexis; Chen, Elizabeth; Stein, Kathryn; Watson, Sable; Barrington, Clare; Lightfoot, Alexandra F.

    2015-01-01

    Theatre-based interventions have been used in health promotion activities among young people to address HIV and sexual health. In this study, we explored the experience of undergraduate student performers participating in a theatre-based HIV prevention and sexual health education intervention for high school students in the USA. Undergraduate students enrolled in a credit-bearing course to learn about HIV and sexual health, participatory theatre and health education techniques. We analysed students’ reflective essays written throughout the semester to identify any changes and the intervention processes that promoted these changes. Students experienced five interrelated forms of transformation: (1) increased knowledge about HIV and sexual health; (2) changes in attitude and communication about sex; (3) artistic growth; (4) emotional growth; and (5) clarification of career goals and future plans. Intervention processes that contributed to these transformations included improvisation, guided writing exercises, the creation of a close-knit cohesive group, and interactions with a group of HIV-positive speakers. Theatre-based, peer-led sexual health programmes can provide a transformative experience for undergraduate student performers. The transformative effects are linked to specific activities and processes of the intervention and require examination in future research. PMID:26085813

  20. 42 CFR 35.62 - Acceptance of contributions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Acceptance of contributions. 35.62 Section 35.62 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICAL CARE AND EXAMINATIONS HOSPITAL AND STATION MANAGEMENT Contributions for the Benefit of Patients § 35.62 Acceptance...

  1. 42 CFR 35.62 - Acceptance of contributions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Acceptance of contributions. 35.62 Section 35.62 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICAL CARE AND EXAMINATIONS HOSPITAL AND STATION MANAGEMENT Contributions for the Benefit of Patients § 35.62 Acceptance...

  2. 42 CFR 35.62 - Acceptance of contributions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Acceptance of contributions. 35.62 Section 35.62 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICAL CARE AND EXAMINATIONS HOSPITAL AND STATION MANAGEMENT Contributions for the Benefit of Patients § 35.62 Acceptance...

  3. 42 CFR 35.62 - Acceptance of contributions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Acceptance of contributions. 35.62 Section 35.62 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICAL CARE AND EXAMINATIONS HOSPITAL AND STATION MANAGEMENT Contributions for the Benefit of Patients § 35.62 Acceptance...

  4. Experiments on a wind turbine blade testing an indication for damage using the causal and anti-causal Green's function reconstructed from a diffuse field

    NASA Astrophysics Data System (ADS)

    Tippmann, Jeffery D.; Lanza di Scalea, Francesco

    2014-03-01

    The increasing demand for renewable and clean power generation has resulted in increasing sizes of rotor blades in wind turbine systems. The demanding and variable operational environments have introduced the need for structural health monitoring systems in the blades in order to prevent unexpected downtime events in the operation of the power plant. Many non-destructive evaluation methods used for structural health monitoring purposes need external excitation sources. However, several systems already accepted in the wind turbine industry are passive. Here we present a new approach to health monitoring of a wind turbine blade using only passive sensors and the existing noise created on the blade during operation. This is achieved using a known method to reconstruct the causal and anticausal time-domain Green's function between any two points in an array of passive sensors placed in a diffuse field. Damage is indicated when the similarity between the causal and anticausal signals decrease due to nonlinearities introduced from structural damage. This method was studied experimentally using a CX-100 wind turbine test blade located at the UCSD's Powell Structural Laboratories where a diffuse field was approximated by exciting the skin of the blade with a random signal at several locations.

  5. Wind turbine rotor assembly

    SciTech Connect

    Kaiser, H. W.

    1984-11-20

    A vertical axis wind turbine having a horizontal arm member which supports an upright blade assembly. Bearing structure coupling the blade assembly to the turbine arm permits blade movement about its longitudinal axis as well as flexing motion of the blade assembly about axes perpendicular to the longitudinal axis. A latching mechanism automatically locks the blade assembly to its supporting arm during normal turbine operation and automatically unlocks same when the turbine is at rest. For overspeed prevention, a centrifugally actuated arm functions to unlatch the blade assembly permitting same to slipstream or feather into the wind. Manually actuated means are also provided for unlatching the moving blade assembly. The turbine arm additionally carries a switching mechanism in circuit with a turbine generator with said mechanism functioning to open and hence protect the generator circuit in the event of an overspeed condition of the turbine.

  6. Bilateral inferior turbinate osteoma.

    PubMed

    Sahemey, R; Warfield, A T; Ahmed, S

    2016-01-01

    Osteomas are the most common benign osteoclastic tumours of the paranasal sinuses. However, nasal cavity and turbinate osteomas are extremely rare. Only nine middle turbinate, three inferior turbinate and one inferior turbinate osteoma cases have been reported to date. The present case report describes the management and follow-up of symptomatic bilateral inferior turbinate osteoma.A 60-year-old female presented with symptoms of bilateral nasal obstruction and right-sided epiphora. Radiological investigation found hypertrophic bony changes involving both inferior turbinates. The patient was managed successfully by endoscopic inferior turbinectomies in order to achieve a patent airway, with no further recurrence of tumour after 3 months postoperatively.To the best of our knowledge, this is the first reported case of bilateral inferior turbinate osteoma. We describe a safe and minimally invasive method of tumour resection, which has a better cosmetic outcome compared with other approaches. PMID:27534890

  7. The NASA Lewis large wind turbine program

    NASA Technical Reports Server (NTRS)

    Thomas, R. L.; Baldwin, D. H.

    1981-01-01

    The program is directed toward development of the technology for safe, reliable, environmentally acceptable large wind turbines that have the potential to generate a significant amount of electricity at costs competitive with conventional electric generation systems. In addition, these large wind turbines must be fully compatible with electric utility operations and interface requirements. Advances are made by gaining a better understanding of the system design drivers, improvements in the analytical design tools, verification of design methods with operating field data, and the incorporation of new technology and innovative designs. An overview of the program activities is presented and includes results from the first and second generation field machines (Mod-OA, -1, and -2), the design phase of the third generation wind turbine (Mod-5) and the advanced technology projects. Also included is the status of the Department of Interior WTS-4 machine.

  8. Shoosing the appropriate size wind turbine

    SciTech Connect

    Lynette, R.

    1996-12-31

    Within the past several years, wind turbines rated at 400 kW and higher have been introduced into the market, and some manufacturers are developing machines rated at 750 - 1,000+ kW. This raises the question: What is the appropriate size for utility-grade wind turbines today? The answer depends upon the site where the machines will be used and the local conditions. The issues discussed in the paper are: (1) Site-Related (a) Visual, noise, erosion, television interference, interference with aviation (b) Siting efficiency (2) Logistics (a) Adequacy of roads and bridges to accept large vehicles (b) Availability and cost of cranes for erection and maintenance (c) Capability of local repair/overhauls (3) Cost Effectiveness (a) Capital costs (1) Wind Turbine (2) Infrastructure costs (b) Maintenance costs (4) Technical/Financial Risk. 1 fig., 1 tab.

  9. Coalescing Wind Turbine Wakes

    DOE PAGESBeta

    Lee, S.; Churchfield, M.; Sirnivas, S.; Moriarty, P.; Nielsen, F. G.; Skaare, B.; Byklum, E.

    2015-06-18

    A team of researchers from the National Renewable Energy Laboratory and Statoil used large-eddy simulations to numerically investigate the merging wakes from upstream offshore wind turbines. Merging wakes are typical phenomena in wind farm flows in which neighboring turbine wakes consolidate to form complex flow patterns that are as yet not well understood. In the present study, three 6-MW turbines in a row were subjected to a neutrally stable atmospheric boundary layer flow. As a result, the wake from the farthest upstream turbine conjoined the downstream wake, which significantly altered the subsequent velocity deficit structures, turbulence intensity, and the globalmore » meandering behavior. The complexity increased even more when the combined wakes from the two upstream turbines mixed with the wake generated by the last turbine, thereby forming a "triplet" structure. Although the influence of the wake generated by the first turbine decayed with downstream distance, the mutated wakes from the second turbine continued to influence the downstream wake. Two mirror-image angles of wind directions that yielded partial wakes impinging on the downstream turbines yielded asymmetric wake profiles that could be attributed to the changing flow directions in the rotor plane induced by the Coriolis force. In conclusion, the turbine wakes persisted for extended distances in the present study, which is a result of low aerodynamic surface roughness typically found in offshore conditions« less

  10. Coalescing Wind Turbine Wakes

    SciTech Connect

    Lee, S.; Churchfield, M.; Sirnivas, S.; Moriarty, P.; Nielsen, F. G.; Skaare, B.; Byklum, E.

    2015-06-18

    A team of researchers from the National Renewable Energy Laboratory and Statoil used large-eddy simulations to numerically investigate the merging wakes from upstream offshore wind turbines. Merging wakes are typical phenomena in wind farm flows in which neighboring turbine wakes consolidate to form complex flow patterns that are as yet not well understood. In the present study, three 6-MW turbines in a row were subjected to a neutrally stable atmospheric boundary layer flow. As a result, the wake from the farthest upstream turbine conjoined the downstream wake, which significantly altered the subsequent velocity deficit structures, turbulence intensity, and the global meandering behavior. The complexity increased even more when the combined wakes from the two upstream turbines mixed with the wake generated by the last turbine, thereby forming a "triplet" structure. Although the influence of the wake generated by the first turbine decayed with downstream distance, the mutated wakes from the second turbine continued to influence the downstream wake. Two mirror-image angles of wind directions that yielded partial wakes impinging on the downstream turbines yielded asymmetric wake profiles that could be attributed to the changing flow directions in the rotor plane induced by the Coriolis force. In conclusion, the turbine wakes persisted for extended distances in the present study, which is a result of low aerodynamic surface roughness typically found in offshore conditions

  11. Turbine turbobrake systems

    NASA Astrophysics Data System (ADS)

    Goodisman, Michael I.

    Short duration rotating turbine facilities are a recent development in the field of turbine research. Turbine braking devices can be used to maintain the turbine at the desired test speed, resulting in a longer usable test time. The Isentropic Light Piston Cascade at the Defence Research Agency in Pyestock will perform heat transfer and aerodynamic tests on the first stage of a Rolls-Royce turbine (MT1) linked to a new type of brake, the 'axial turbo brake'. The axial turbo brake is driven by the turbine's exhaust gas and is isolated from the turbine by a choked throat. The turbo brake's power absorption must be controlled to match the power developed by the turbine stage for a constant speed run. Both the turbo brake blade shape and novel power control system were developed from tests on a 0.17 scale test rig. The turbo brake's braking is controlled through by-pass of flow over the blade tips and partial blockage of the turbo brake's exit annulus. Also described is the mechanical design, development and manufacture of the full size turbo brake, turbine disc and turbine blades, which have been successfully spun tested to their overspeed condition. Finally, a theory for self-pumping turbo brakes is developed. These devices would have additional applications because they do not require a supply of high pressure gas to drive them.

  12. Turbine engine interstage seal

    SciTech Connect

    Clevenger, L.L.

    1993-08-10

    A seal structure is described for a turbine engine, the turbine engine including a housing surrounding a centrifugal compressor having a rotor, and a radial inflow turbine including a turbine rotor, the compressor rotor and the turbine rotor being disposed in back-to-back relation, the turbine rotor being drivingly connected with the compressor rotor and axially spaced therefrom to define an annular gap there between, the gap radially bounded at its outer periphery by the housing and at its inner periphery by an annular surface intermediate the compressor rotor and the turbine rotor an annular sealing member disposed in the gap to control air flow from the compressor toward the turbine; the annular sealing member the first axial direction, and a third annular wall portion joining with the second annular wall portion and extending inward therefrom towards the surface intermediate the compressor rotor and the turbine rotor, and biasing means cooperating with the housing for urging the seal structure toward the turbine rotor.

  13. Coalescing Wind Turbine Wakes

    NASA Astrophysics Data System (ADS)

    Lee, S.; Churchfield, M.; Sirnivas, S.; Moriarty, P.; Nielsen, F. G.; Skaare, B.; Byklum, E.

    2015-06-01

    A team of researchers from the National Renewable Energy Laboratory and Statoil used large-eddy simulations to numerically investigate the merging wakes from upstream offshore wind turbines. Merging wakes are typical phenomena in wind farm flows in which neighboring turbine wakes consolidate to form complex flow patterns that are as yet not well understood. In the present study, three 6-MW turbines in a row were subjected to a neutrally stable atmospheric boundary layer flow. As a result, the wake from the farthest upstream turbine conjoined the downstream wake, which significantly altered the subsequent velocity deficit structures, turbulence intensity, and the global meandering behavior. The complexity increased even more when the combined wakes from the two upstream turbines mixed with the wake generated by the last turbine, thereby forming a “triplet” structure. Although the influence of the wake generated by the first turbine decayed with downstream distance, the mutated wakes from the second turbine continued to influence the downstream wake. Two mirror-image angles of wind directions that yielded partial wakes impinging on the downstream turbines yielded asymmetric wake profiles that could be attributed to the changing flow directions in the rotor plane induced by the Coriolis force. The turbine wakes persisted for extended distances in the present study, which is a result of low aerodynamic surface roughness typically found in offshore conditions.

  14. Malpositioned implants in the anterior maxilla: a novel restorative approach to reestablish peri-implant tissue health and acceptable esthetics. Part II: Case report and discussion.

    PubMed

    Moráguez, Osvaldo D; Vailati, Francesca; Belser, Urs C

    2015-01-01

    This two-part case presentation describes the prosthetic challenge of managing complications in a 50-year-old female patient after inadequate esthetic risk assessment, treatment planning, and implant placement in the anterior maxilla. In Part I, the clinical situation was described, and different restorative solutions were proposed to correct the extreme facial inclination of the implants, excluding major surgical procedures, namely implant removal. In Part II, different prosthetic options are discussed, and the final treatment is revealed. A noninvasive treatment protocol was applied to transform a severely compromised postsurgical situation into an esthetically acceptable result. An unconventional prosthesis design was implemented, including the use of ceramic veneers bonded to the CAD/CAM-generated screw-retained zirconia- based fixed dental prosthesis (FDP), to correct major axis-related problems and spatial discrepancies. PMID:26794049

  15. Perceptions of Human Papillomavirus (HPV) infection and acceptability of HPV vaccine among men attending a sexual health clinic differ according to sexual orientation.

    PubMed

    Giuliani, Massimo; Vescio, Maria Fenicia; Donà, Maria Gabriella; Latini, Alessandra; Frasca, Mirko; Colafigli, Manuela; Farinella, Massimo; Rezza, Giovanni; Cristaudo, Antonio

    2016-06-01

    Our aim was to gain a better understanding of the knowledge about Human Papillomavirus (HPV) infection and attitudes toward the HPV vaccine among men at risk for sexually transmitted infections (STI). A self-administered questionnaire was completed by attendees of the largest STI Center in Rome, Italy, from April to June 2013. Determinants of vaccine acceptability were investigated using a Structured Equation Model. A total of 423 males participated in the survey: 296 (70.0%) men who have sex with men (MSM) and 127 (30.0%) men who have sex with women (MSW). Only one half of the participants knew that HPV is the cause of genital warts (56.9% of MSM vs. 49.5% of MSW, p=0.28). Even less were aware that HPV causes cancer in men (37.2% vs. 27.3%, p=0.08). MSW were more likely to indicate HPV as a cause of cervical cancer (80.8% vs. 69.3%, p=0.03) and to have heard about the vaccine (58.3 vs. 43.6%, p=0.01). Moreover, 72.1% of MSM and 70.3% of MSW were willing to be vaccinated. A rise of one-unit in the HPV awareness score increased the OR of vaccine acceptability among MSM by 25% (OR 1.25, 95%CI: 1.05-1.49; p=0.013). Differently, only attitudes had a relevant effect on willingness to be vaccinated among MSW (OR 3.32, 95%CI: 1.53-7.17; p=0.002). Efforts should be made to maximize awareness of HPV, especially as a causative agent of genital warts and male cancers, and to reinforce positive attitudes toward vaccination among men visiting STI centers. PMID:26752151

  16. 30. VICTOR WATER TURBINE, STILWELLBIERCE CO., DAYTON, OHIO. SIMILAR TURBINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. VICTOR WATER TURBINE, STILWELL-BIERCE CO., DAYTON, OHIO. SIMILAR TURBINE TO LEFT (DOUBLE TURBINE SYSTEM), PHOTO TAKEN FROM PENSTOCK. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  17. Mod 2 Wind Turbine Development Project

    SciTech Connect

    1980-10-01

    The primary objective in the development of Mod 2 was to design a wind turbine to produce energy for less than 5 cents/kWh based on 1980 cost forecasts. The pricing method used to project the Mod 2 energy costs is the levelized fixed charge rate approach, generally accepted in the electric utility industry as a basis for relative ranking of energy alternatives. This method derives a levelized energy price necessary to recover utility's purchasing, installing, owning, operating, and maintenance costs.

  18. The Impact of Child Problem Behaviors of Children with ASD on Parent Mental Health: The Mediating Role of Acceptance and Empowerment

    ERIC Educational Resources Information Center

    Weiss, Jonathan A.; Cappadocia, M. Catherine; MacMullin, Jennifer Anne; Viecili, Michelle; Lunsky, Yona

    2012-01-01

    Raising a child with an autism spectrum disorder (ASD) has often been associated with higher levels of parenting stress and psychological distress, and a number of studies have examined the role of psychological processes as mediators of the impact of child problem behavior on parent mental health. The current study examined the relations among…

  19. Feasibility, Acceptability, and Initial Findings from a Community-Based Cultural Mental Health Intervention for American Indian Youth and Their Families

    ERIC Educational Resources Information Center

    Goodkind, Jessica; LaNoue, Marianna; Lee, Christopher; Freeland, Lance; Freund, Rachel

    2012-01-01

    Through a CBPR partnership, university and American Indian (AI) tribal members developed and tested "Our Life" intervention to promote mental health of AI youth and their families by addressing root causes of violence, trauma, and substance abuse. Based on premises that well-being is built on a foundation of traditional cultural beliefs and…

  20. The Community Liaison Program: A Health Education Pilot Program to Increase Minority Awareness of HIV and Acceptance of HIV Vaccine Trials

    ERIC Educational Resources Information Center

    Kelley, R. T.; Hannans, A.; Kreps, G. L.; Johnson, K.

    2012-01-01

    This paper describes a 16-month health education pilot program based on diffusion of innovation and social network theories. The program was implemented by volunteer community liaisons for the purposes of increasing awareness of and support for HIV vaccine research in minority populations. This theoretically driven pilot program allowed the…

  1. Very Low Head Turbine Deployment in Canada

    NASA Astrophysics Data System (ADS)

    Kemp, P.; Williams, C.; Sasseville, Remi; Anderson, N.

    2014-03-01

    -river live passage tests for a wide variety of fish species. Latest test results indicate fish passage survivability close to 100%. Further fish studies are planned in Canada later this year. Successful deployment must meet societal requirements to gain community acceptance and public approval. Aesthetics considerations include low noise, disguised control buildings and vigilant turbine integration into the low profile existing structures. The resulting design was selected for deployment at existing historic National Park waterway structures. The integration of all of these design elements permits the successful deployment of the VLH turbine in Canada.

  2. The acceptability of ending a patient's life

    PubMed Central

    Guedj, M; Gibert, M; Maudet, A; Munoz, S; Mullet, E; Sorum, P

    2005-01-01

    Objectives: To clarify how lay people and health professionals judge the acceptability of ending the life of a terminally ill patient. Design: Participants judged this acceptability in a set of 16 scenarios that combined four factors: the identity of the actor (patient or physician), the patient's statement or not of a desire to have his life ended, the nature of the action as relatively active (injecting a toxin) or passive (disconnecting life support), and the type of suffering (intractable physical pain, complete dependence, or severe psychiatric illness). Participants: 115 lay people and 72 health professionals (22 nurse's aides, 44 nurses, six physicians) in Toulouse, France. Main measurements: Mean acceptability ratings for each scenario for each group. Results: Life ending interventions are more acceptable to lay people than to the health professionals. For both, acceptability is highest for intractable physical suffering; is higher when patients end their own lives than when physicians do so; and, when physicians are the actors, is higher when patients have expressed a desire to die (voluntary euthanasia) than when they have not (involuntary euthanasia). In contrast, when patients perform the action, acceptability for the lay people and nurse's aides does not depend on whether the patient has expressed a desire to die, while for the nurses and physicians unassisted suicide is more acceptable than physician assisted suicide. Conclusions: Lay participants judge the acceptability of life ending actions in largely the same way as do healthcare professionals. PMID:15923476

  3. Direct drive wind turbine

    DOEpatents

    Bywaters, Garrett Lee; Danforth, William; Bevington, Christopher; Stowell, Jesse; Costin, Daniel

    2006-09-19

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  4. Direct drive wind turbine

    DOEpatents

    Bywaters, Garrett; Danforth, William; Bevington, Christopher; Jesse, Stowell; Costin, Daniel

    2007-02-27

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  5. Direct drive wind turbine

    DOEpatents

    Bywaters, Garrett; Danforth, William; Bevington, Christopher; Stowell, Jesse; Costin, Daniel

    2006-07-11

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  6. Direct drive wind turbine

    DOEpatents

    Bywaters, Garrett; Danforth, William; Bevington, Christopher; Jesse, Stowell; Costin, Daniel

    2006-10-10

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  7. Small turbines, big unknown

    SciTech Connect

    Gipe, P.

    1995-07-01

    While financial markets focus on the wheeling and dealing of the big wind companies, the small wind turbine industry quietly keeps churning out its smaller but effective machines. Some, the micro turbines, are so small they can be carried by hand. Though worldwide sales of small wind turbines fall far short of even one large windpower plant, figures reach $8 million to $10 million annually and could be as much as twice that if batteries and engineering services are included.

  8. Vertical Axis Wind Turbine

    2002-04-01

    Blade fatigue life is an important element in determining the economic viability of the Vertical-Axis Wind Turbine (VAWT). VAWT-SAL Vertical Axis Wind Turbine- Stochastic Aerodynamic Loads Ver 3.2 numerically simulates the stochastic (random0 aerodynamic loads of the Vertical-Axis Wind Turbine (VAWT) created by the atomspheric turbulence. The program takes into account the rotor geometry, operating conditions, and assumed turbulence properties.

  9. The Acceptability Among Health Researchers and Clinicians of Social Media to Translate Research Evidence to Clinical Practice: Mixed-Methods Survey and Interview Study

    PubMed Central

    Tunnecliff, Jacqueline; Ilic, Dragan; Morgan, Prue; Keating, Jennifer; Gaida, James E; Clearihan, Lynette; Sadasivan, Sivalal; Davies, David; Ganesh, Shankar; Mohanty, Patitapaban; Weiner, John; Reynolds, John

    2015-01-01

    Background Establishing and promoting connections between health researchers and health professional clinicians may help translate research evidence to clinical practice. Social media may have the capacity to enhance these connections. Objective The aim of this study was to explore health researchers’ and clinicians’ current use of social media and their beliefs and attitudes towards the use of social media for communicating research evidence. Methods This study used a mixed-methods approach to obtain qualitative and quantitative data. Participation was open to health researchers and clinicians. Data regarding demographic details, current use of social media, and beliefs and attitudes towards the use of social media for professional purposes were obtained through an anonymous Web-based survey. The survey was distributed via email to research centers, educational and clinical institutions, and health professional associations in Australia, India, and Malaysia. Consenting participants were stratified by country and role and selected at random for semistructured telephone interviews to explore themes arising from the survey. Results A total of 856 participants completed the questionnaire with 125 participants declining to participate, resulting in a response rate of 87.3%. 69 interviews were conducted with participants from Australia, India, and Malaysia. Social media was used for recreation by 89.2% (749/840) of participants and for professional purposes by 80.0% (682/852) of participants. Significant associations were found between frequency of professional social media use and age, gender, country of residence, and graduate status. Over a quarter (26.9%, 229/852) of participants used social media for obtaining research evidence, and 15.0% (128/852) of participants used social media for disseminating research evidence. Most participants (95.9%, 810/845) felt there was a role for social media in disseminating or obtaining research evidence. Over half of the

  10. Mod-2 wind turbine project assessment and cluster test plans

    NASA Technical Reports Server (NTRS)

    Gordon, L. H.

    1982-01-01

    An assessment of the Mod-2 Wind Turbine project is presented based on initial goals and present results. Specifically, the Mod-2 background, project flow, and a chronology of events/results leading to Mod-2 acceptance is presented. After checkout/acceptance of the three operating turbines, NASA/LeRC will continue management of a two year test program performed at the DOE Goodnoe Hills test site. This test program is expected to yield data necessary for the continued development and optimization of wind energy systems. These test activities, the implementation of, and the results to date are also presented.

  11. Rampressor Turbine Design

    SciTech Connect

    Ramgen Power Systems

    2003-09-30

    The design of a unique gas turbine engine is presented. The first Rampressor Turbine engine rig will be a configuration where the Rampressor rotor is integrated into an existing industrial gas turbine engine. The Rampressor rotor compresses air which is burned in a traditional stationary combustion system in order to increase the enthalpy of the compressed air. The combustion products are then expanded through a conventional gas turbine which provides both compressor and electrical power. This in turn produces shaft torque, which drives a generator to provide electricity. The design and the associated design process of such an engine are discussed in this report.

  12. Wind Turbine Structural Dynamics

    NASA Technical Reports Server (NTRS)

    Miller, D. R. (Editor)

    1978-01-01

    A workshop on wind turbine structural dynamics was held to review and document current United States work on the dynamic behavior of large wind turbines, primarily of the horizontal-axis type, and to identify and discuss other wind turbine configurations that may have lower cost and weight. Information was exchanged on the following topics: (1) Methods for calculating dynamic loads; (2) Aeroelasticity stability (3) Wind loads, both steady and transient; (4) Critical design conditions; (5) Drive train dynamics; and (6) Behavior of operating wind turbines.

  13. Hermetic turbine generator

    DOEpatents

    Meacher, John S.; Ruscitto, David E.

    1982-01-01

    A Rankine cycle turbine drives an electric generator and a feed pump, all on a single shaft, and all enclosed within a hermetically sealed case. The shaft is vertically oriented with the turbine exhaust directed downward and the shaft is supported on hydrodynamic fluid film bearings using the process fluid as lubricant and coolant. The selection of process fluid, type of turbine, operating speed, system power rating, and cycle state points are uniquely coordinated to achieve high turbine efficiency at the temperature levels imposed by the recovery of waste heat from the more prevalent industrial processes.

  14. Experimental turbine VT-400

    NASA Astrophysics Data System (ADS)

    Zitek, Pavel; Milčák, Petr; Noga, Tomáš

    2016-03-01

    The experimental air turbine VT400 is located in hall laboratories of the Department of Power System Engineering. It is a single-stage air turbine located in the suction of the compressor. It is able to solve various problems concerning the construction solution of turbine stages. The content of the article will deal mainly with the description of measurements on this turbine. The up-to-now research on this test rig will be briefly mentioned, too, as well as the description of the ongoing reconstruction.

  15. Predictive factors associated with the acceptance of pandemic and seasonal influenza vaccination in health care workers and students in Tuscany, Central Italy.

    PubMed

    Bonaccorsi, Guglielmo; Lorini, Chiara; Santomauro, Francesca; Guarducci, Silvia; Pellegrino, Elettra; Puggelli, Francesco; Balli, Marta; Bonanni, Paolo

    2013-12-01

    Assessing the beliefs and attitudes of Health Care Workers (HCW) to influenza and influenza vaccination can be useful in overcoming low compliance rates. The purpose of our study is to evaluate the opinion of HCW and students regarding influenza, influenza vaccine and the factors associated with vaccination compliance. A survey was conducted between October 2010 and April 2011 in the Florence metropolitan area. A questionnaire was administered to HCW in three local healthcare units and at Careggi University Teaching Hospital. Students matriculating in health degree programs at Florence University were also surveyed. The coverage with vaccination against seasonal and pandemic influenza is generally low, and it is lower in students than in HCW (12.5% vs 15% for the seasonal vaccination, 8.5% vs 18% for the pandemic vaccination). Individuals comply with vaccination offer mainly to protect themselves and their contacts. Individuals not receiving vaccination did not consider themselves at risk, had never been vaccinated before or believed that pandemic influenza was not a public health concern. Physicians had the highest compliance to vaccination and women were less frequently vaccinated than men. HCW do not appear to perceive their possible influenza infections as a risk for patients: HCW receive vaccination mainly as a form of personal protection. Low compliance to vaccination is determined by various factors and therefore requires a multi-faceted strategy of response. This should include short-term actions to overcome organizational barriers, in addition to long-term interventions to raise HCW's level of knowledge about influenza and influenza vaccination. PMID:23954990

  16. Replacing fish meal by food waste to produce lower trophic level fish containing acceptable levels of polycyclic aromatic hydrocarbons: Health risk assessments.

    PubMed

    Cheng, Zhang; Mo, Wing-Yin; Lam, Cheung-Lung; Choi, Wai-Ming; Wong, Ming-Hung

    2015-08-01

    This study aimed at using different types of food wastes (mainly containing cereal [food waste A] and meat meal [food waste B]) as major sources of protein to replace the fish meal used in fish feeds to produce quality fish. The traditional fish farming model used to culture low trophic level fish included: bighead, (Hypophthalmichthys nobilis), grass carp, (Ctenopharyngodon idellus), and mud carp, (Cirrhinus molitorella) of omnivorous chain. The results indicated that grass carp and bighead carp fed with food waste feeds were relatively free of PAHs. The results of health risk assessment showed that the fish fed with food waste feeds were safe for consumption from the PAHs perspective. PMID:25880597

  17. ATLAS ACCEPTANCE TEST

    SciTech Connect

    J.C. COCHRANE; J.V. PARKER; ET AL

    2001-06-01

    The acceptance test program for Atlas, a 23 MJ pulsed power facility for use in the Los Alamos High Energy Density Hydrodynamics program, has been completed. Completion of this program officially releases Atlas from the construction phase and readies it for experiments. Details of the acceptance test program results and of machine capabilities for experiments will be presented.

  18. Replacing fish meal by food waste in feed pellets to culture lower trophic level fish containing acceptable levels of organochlorine pesticides: health risk assessments.

    PubMed

    Cheng, Zhang; Mo, Wing-Yin; Man, Yu-Bon; Nie, Xiang-Ping; Li, Kai-Bing; Wong, Ming-Hung

    2014-12-01

    The present study used food waste (collected from local hotels and restaurants) feed pellets in polyculture of low-trophic level fish [bighead (Aristichtys nobilis), grass carp (Ctenopharyngodon idellus), and mud carp (Cirrhina molitorella)] aiming at producing safe and quality products for local consumption. The results indicated that grass carp (hexachlorocyclohexanes (HCHs) <0.03; dichlorodiphenyltrichloroethanes (DDTs) 1.42-3.34 ng/g ww) and bighead carp (HCHs<0.03; DDTs 1.55-2.56 ng/g ww) fed with food waste feed pellets were relatively free of organochlorine pesticides (OCPs). The experimental ponds (water and sediment) were relatively free of OCPs, lowering the possibility of biomagnification of OCPs in the food chains within the ponds. The raw concentrations of OCPs extracted from the fish were not in the bioavailable form, which would ultimately reach bloodstream and exert adverse effects on human body. Health risk assessments based on digestible concentrations are commonly regarded as a more accurate method. The results of health risk assessments based on raw and digestible concentrations showed that the fish fed with food waste feed pellets were safe for consumption from the OCP perspective. PMID:25080070

  19. Improving eye safety in citrus harvest crews through the acceptance of personal protective equipment, community-based participatory research, social marketing, and community health workers.

    PubMed

    Tovar-Aguilar, J Antonio; Monaghan, Paul F; Bryant, Carol A; Esposito, Andrew; Wade, Mark; Ruiz, Omar; McDermott, Robert J

    2014-01-01

    For the last 10 years, the Partnership for Citrus Workers Health (PCWH) has been an evidence-based intervention program that promotes the adoption of protective eye safety equipment among Spanish-speaking farmworkers of Florida. At the root of this program is the systematic use of community-based preventive marketing (CBPM) and the training of community health workers (CHWs) among citrus harvester using popular education. CBPM is a model that combines the organizational system of community-based participatory research (CBPR) and the strategies of social marketing. This particular program relied on formative research data using a mixed-methods approach and a multilevel stakeholder analysis that allowed for rapid dissemination, effective increase of personal protective equipment (PPE) usage, and a subsequent impact on adoptive workers and companies. Focus groups, face-to-face interviews, surveys, participant observation, Greco-Latin square, and quasi-experimental tests were implemented. A 20-hour popular education training produced CHWs that translated results of the formative research to potential adopters and also provided first aid skills for eye injuries. Reduction of injuries is not limited to the use of safety glasses, but also to the adoption of timely intervention and regular eye hygiene. Limitations include adoption in only large companies, rapid decline of eye safety glasses without consistent intervention, technological limitations of glasses, and thorough cost-benefit analysis. PMID:24911686

  20. Wind turbine sound pressure level calculations at dwellings.

    PubMed

    Keith, Stephen E; Feder, Katya; Voicescu, Sonia A; Soukhovtsev, Victor; Denning, Allison; Tsang, Jason; Broner, Norm; Leroux, Tony; Richarz, Werner; van den Berg, Frits

    2016-03-01

    This paper provides calculations of outdoor sound pressure levels (SPLs) at dwellings for 10 wind turbine models, to support Health Canada's Community Noise and Health Study. Manufacturer supplied and measured wind turbine sound power levels were used to calculate outdoor SPL at 1238 dwellings using ISO [(1996). ISO 9613-2-Acoustics] and a Swedish noise propagation method. Both methods yielded statistically equivalent results. The A- and C-weighted results were highly correlated over the 1238 dwellings (Pearson's linear correlation coefficient r > 0.8). Calculated wind turbine SPLs were compared to ambient SPLs from other sources, estimated using guidance documents from the United States and Alberta, Canada. PMID:27036282

  1. Four therapeutic diets: adherence and acceptability.

    PubMed

    Berkow, Susan E; Barnard, Neal; Eckart, Jill; Katcher, Heather

    2010-01-01

    Many health conditions are treated, at least in part, by therapeutic diets. Although the success of any intervention depends on its acceptability to the patient, the acceptability of therapeutic diets and factors that influence it have been largely neglected in nutrition research. A working definition of acceptability is proposed and an examination and summary are provided of available data on the acceptability of common diet regimens used for medical conditions. The goal is to suggest ways to improve the success of therapeutic diets. The proposed working definition of "acceptability" refers to the user's judgment of the advantages and disadvantages of a therapeutic diet-in relation to palatability, costs, and effects on eating behaviour and health-that influence the likelihood of adherence. Very low-calorie, reduced-fat omnivorous, vegetarian and vegan, and low-carbohydrate diets all achieve acceptability among the majority of users in studies of up to one year, in terms of attrition and adherence rates and results of questionnaires assessing eating behaviours. Longer studies are fewer, but they suggest that vegetarian, vegan, and reduced-fat diets are acceptable, as indicated by sustained changes in nutrient intake. Few studies of this length have been published for very low-calorie or low-carbohydrate diets. Long-term studies of adherence and acceptability of these and other therapeutic diets are warranted. PMID:21144137

  2. Single rotor turbine engine

    DOEpatents

    Platts, David A.

    2002-01-01

    There has been invented a turbine engine with a single rotor which cools the engine, functions as a radial compressor, pushes air through the engine to the ignition point, and acts as an axial turbine for powering the compressor. The invention engine is designed to use a simple scheme of conventional passage shapes to provide both a radial and axial flow pattern through the single rotor, thereby allowing the radial intake air flow to cool the turbine blades and turbine exhaust gases in an axial flow to be used for energy transfer. In an alternative embodiment, an electric generator is incorporated in the engine to specifically adapt the invention for power generation. Magnets are embedded in the exhaust face of the single rotor proximate to a ring of stationary magnetic cores with windings to provide for the generation of electricity. In this alternative embodiment, the turbine is a radial inflow turbine rather than an axial turbine as used in the first embodiment. Radial inflow passages of conventional design are interleaved with radial compressor passages to allow the intake air to cool the turbine blades.

  3. Turbine disc sealing assembly

    DOEpatents

    Diakunchak, Ihor S.

    2013-03-05

    A disc seal assembly for use in a turbine engine. The disc seal assembly includes a plurality of outwardly extending sealing flange members that define a plurality of fluid pockets. The sealing flange members define a labyrinth flow path therebetween to limit leakage between a hot gas path and a disc cavity in the turbine engine.

  4. Acceptability and Use of Portable Drinking Water and Hand Washing Stations in Health Care Facilities and Their Impact on Patient Hygiene Practices, Western Kenya

    PubMed Central

    Otieno, Ronald; Odhiambo, Aloyce; Faith, Sitnah H.

    2015-01-01

    Many health care facilities (HCF) in developing countries lack access to reliable hand washing stations and safe drinking water. To address this problem, we installed portable, low-cost hand washing stations (HWS) and drinking water stations (DWS), and trained healthcare workers (HCW) on hand hygiene, safe drinking water, and patient education techniques at 200 rural HCFs lacking a reliable water supply in western Kenya. We performed a survey at baseline and a follow-up evaluation at 15 months to assess the impact of the intervention at a random sample of 40 HCFs and 391 households nearest to these HCFs. From baseline to follow-up, there was a statistically significant increase in the percentage of dispensaries with access to HWSs with soap (42% vs. 77%, p<0.01) and access to safe drinking water (6% vs. 55%, p<0.01). Female heads of household in the HCF catchment area exhibited statistically significant increases from baseline to follow-up in the ability to state target times for hand washing (10% vs. 35%, p<0.01), perform all four hand washing steps correctly (32% vs. 43%, p = 0.01), and report treatment of stored drinking water using any method (73% vs. 92%, p<0.01); the percentage of households with detectable free residual chlorine in stored drinking water did not change (6%, vs. 8%, p = 0.14). The installation of low-cost, low-maintenance, locally-available, portable hand washing and drinking water stations in rural HCFs without access to 24-hour piped water helped assure that health workers had a place to wash their hands and provide safe drinking water. This HCF intervention may have also contributed to the improvement of hand hygiene and reported safe drinking water behaviors among households nearest to HCFs. PMID:25961293

  5. 77 FR 28371 - Lockhart Power Company, Inc.; Notice of Application Accepted for Filing and Soliciting Motions To...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-14

    ...; (4) a powerhouse containing a single 1.24-megawatt turbine-generator unit; (5) a 510-foot-long...-hours annually. Lockhart Power Company, Inc. proposes to repair or upgrade the turbine unit and return... Energy Regulatory Commission Lockhart Power Company, Inc.; Notice of Application Accepted for Filing...

  6. Ceramic Cerami Turbine Nozzle

    DOEpatents

    Boyd, Gary L.

    1997-04-01

    A turbine nozzle vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The metallic components having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine nozzle vane assembly. The turbine nozzle vane assembly includes an outer shroud and an inner shroud having a plurality of horizontally segmented vanes therebetween being positioned by a connecting member positioning segmented vanes in functional relationship one to another. The turbine nozzle vane assembly provides an economical, reliable and effective ceramic component having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the other component.

  7. Graphene in turbine blades

    NASA Astrophysics Data System (ADS)

    Das, D. K.; Swain, P. K.; Sahoo, S.

    2016-07-01

    Graphene, the two-dimensional (2D) nanomaterial, draws interest of several researchers due to its many superior properties. It has extensive applications in numerous fields. A turbine is a hydraulic machine which extracts energy from a fluid and converts it into useful work. Recently, Gudukeya and Madanhire have tried to increase the efficiency of Pelton turbine. Beucher et al. have also tried the same by reducing friction between fluid and turbine blades. In this paper, we study the advantages of using graphene as a coating on Pelton turbine blades. It is found that the efficiency of turbines increases, running and maintenance cost is reduced with more power output. By the application of graphene in pipes, cavitation will be reduced, durability of pipes will increase, operation and maintenance cost of water power plants will be less.

  8. Cascaded humidified advanced turbine

    SciTech Connect

    Nakhamkin, M.; Swenson, E.C.; Cohn, A.; Bradshaw, D.; Taylor, R.; Wilson, J.M.; Gaul, G.; Jahnke, F.; Polsky, M.

    1995-05-01

    This article describes how, by combining the best features of simple- and combined-cycle gas turbine power plants, the CHAT cycle concept offers power producers a clean, more efficient and less expensive alternative to both. The patented cascaded advanced turbine and its cascaded humidified advanced turbine (CHAT) derivative offer utilities and other power producers a practical advanced gas turbine power plant by combining commercially-available gas turbine and industrial compressor technologies in a unique way. Compared to combined-cycle plants, a CHAT power plant has lower emissions and specific capital costs-approximately 20 percent lower than what is presently available. Further, CHAT`s operating characteristics are especially well-suited to load following quick start-up scenarios and they are less susceptible to power degradation from higher ambient air temperature conditions.

  9. Ceramic turbine nozzle

    DOEpatents

    Shaffer, James E.; Norton, Paul F.

    1996-01-01

    A turbine nozzle and shroud assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The metallic components having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine nozzle vane assembly. The turbine nozzle vane assembly includes a plurality of segmented vane defining a first vane segment and a second vane segment. Each of the first and second vane segments having a vertical portion. Each of the first vane segments and the second vane segments being positioned in functional relationship one to another within a recess formed within an outer shroud and an inner shroud. The turbine nozzle and shroud assembly provides an economical, reliable and effective ceramic component having a preestablished rate of thermal expansion being less than the preestablished rate of thermal expansion of the other component.

  10. Ceramic turbine nozzle

    DOEpatents

    Shaffer, J.E.; Norton, P.F.

    1996-12-17

    A turbine nozzle and shroud assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The metallic components have a preestablished rate of thermal expansion greater than the preestablished rate of thermal expansion of the turbine nozzle vane assembly. The turbine nozzle vane assembly includes a plurality of segmented vane defining a first vane segment and a second vane segment, each of the first and second vane segments having a vertical portion, and each of the first vane segments and the second vane segments being positioned in functional relationship one to another within a recess formed within an outer shroud and an inner shroud. The turbine nozzle and shroud assembly provides an economical, reliable and effective ceramic component having a preestablished rate of thermal expansion being less than the preestablished rate of thermal expansion of the other component. 4 figs.

  11. AGT-102 automotive gas turbine

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Development of a gas turbine powertrain with a 30% fuel economy improvement over a comparable S1 reciprocating engine, operation within 0.41 HC, 3.4 CO, and 0.40 NOx grams per mile emissions levels, and ability to use a variety of alternate fuels is summarized. The powertrain concept consists of a single-shaft engine with a ceramic inner shell for containment of hot gasses and support of twin regenerators. It uses a fixed-geometry, lean, premixed, prevaporized combustor, and a ceramic radial turbine rotor supported by an air-lubricated journal bearing. The engine is coupled to the vehicle through a widerange continuously variable transmission, which utilizes gearing and a variable-ratio metal compression belt. A response assist flywheel is used to achieve acceptable levels of engine response. The package offers a 100 lb weight advantage in a Chrysler K Car front-wheel-drive installation. Initial layout studies, preliminary transient thermal analysis, ceramic inner housing structural analysis, and detailed performance analysis were carried out for the basic engine.

  12. Ethical acceptability, health policy and foods biotechnology based foods: is there a third way between the precaution principle and an overly enthusiastic dissemination of GMO?

    PubMed

    Meningaud, J P; Moutel, G; Hervé, C

    2001-01-01

    The demand for consumer safety with regard to the food-processing industry is becoming, legitimately, more and more urgent. If ingested drugs can carry deleterious effects that exceed the beneficial effect that the research was initially undertaken for, then the same can only be the case for foods that stem from the same new biotechnologies, zero risk being non existent. There are two conflicting viewpoints about the possible risks linked to genetically modified organisms: a posteriori protection (based on vigilance once the product is on the market) and an a priori protection (at present usually supported by the precaution principle). We suggest a third way, which ensures consumer safety, but doesn't hinder scientific progress. Just as there are regulations for the protection of human subjects in biomedical research and regulations for the use of drugs after they are marketed, so should such regulations be introduced in the domains of food production that use biotechnologies. We therefore suggest that the scientific community and the food-processing industry develop evaluation protocols for new foods like the ones that exist for drugs. We thus offer thirteen regulations, based on the Helsinki declaration, in order to establish these protocols. These proposals, applied to food-processing research, would enable the industry to return confidence to consumers and thus avoid the random blocking of scientific progress, which is a source of health for the greater population. PMID:11401233

  13. Jane Austen's lifelong health problems and final illness: New evidence points to a fatal Hodgkin's disease and excludes the widely accepted Addison's.

    PubMed

    Upfal, A

    2005-06-01

    Jane Austen is typically described as having excellent health until the age of 40 and the onset of a mysterious and fatal illness, initially identified by Sir Zachary Cope in 1964 as Addison's disease. Her biographers, deceived both by Cassandra Austen's destruction of letters containing medical detail, and the cheerful high spirits of the existing letters, have seriously underestimated the extent to which illness affected Austen's life. A medical history reveals that she was particularly susceptible to infection, and suffered unusually severe infective illnesses, as well as a chronic conjunctivitis that impeded her ability to write. There is evidence that Austen was already suffering from an immune deficiency and fatal lymphoma in January 1813, when her second and most popular novel, Pride and Prejudice, was published. Four more novels would follow, written or revised in the shadow of her increasing illness and debility. Whilst it is impossible now to conclusively establish the cause of her death, the existing medical evidence tends to exclude Addison's disease, and suggests there is a high possibility that Jane Austen's fatal illness was Hodgkin's disease, a form of lymphoma. PMID:23674643

  14. Automotive gas turbine fuel control

    NASA Technical Reports Server (NTRS)

    Gold, H. (Inventor)

    1978-01-01

    A fuel control system is reported for automotive-type gas turbines and particulary advanced gas turbines utilizing variable geometry components to improve mileage and reduce pollution emission. The fuel control system compensates for fuel density variations, inlet temperature variations, turbine vane actuation, acceleration, and turbine braking. These parameters are utilized to control various orifices, spool valves and pistons.

  15. Cooled snubber structure for turbine blades

    DOEpatents

    Mayer, Clinton A; Campbell, Christian X; Whalley, Andrew; Marra, John J

    2014-04-01

    A turbine blade assembly in a turbine engine. The turbine blade assembly includes a turbine blade and a first snubber structure. The turbine blade includes an internal cooling passage containing cooling air. The first snubber structure extends outwardly from a sidewall of the turbine blade and includes a hollow interior portion that receives cooling air from the internal cooling passage of the turbine blade.

  16. Wind turbine reliability :understanding and minimizing wind turbine operation and maintenance costs.

    SciTech Connect

    Walford, Christopher A. (Global Energy Concepts. Kirkland, WA)

    2006-03-01

    Wind turbine system reliability is a critical factor in the success of a wind energy project. Poor reliability directly affects both the project's revenue stream through increased operation and maintenance (O&M) costs and reduced availability to generate power due to turbine downtime. Indirectly, the acceptance of wind-generated power by the financial and developer communities as a viable enterprise is influenced by the risk associated with the capital equipment reliability; increased risk, or at least the perception of increased risk, is generally accompanied by increased financing fees or interest rates. This paper outlines the issues relevant to wind turbine reliability for wind turbine power generation projects. The first sections describe the current state of the industry, identify the cost elements associated with wind farm O&M and availability and discuss the causes of uncertainty in estimating wind turbine component reliability. The latter sections discuss the means for reducing O&M costs and propose O&M related research and development efforts that could be pursued by the wind energy research community to reduce cost of energy.

  17. Acceptance, values, and probability.

    PubMed

    Steel, Daniel

    2015-10-01

    This essay makes a case for regarding personal probabilities used in Bayesian analyses of confirmation as objects of acceptance and rejection. That in turn entails that personal probabilities are subject to the argument from inductive risk, which aims to show non-epistemic values can legitimately influence scientific decisions about which hypotheses to accept. In a Bayesian context, the argument from inductive risk suggests that value judgments can influence decisions about which probability models to accept for likelihoods and priors. As a consequence, if the argument from inductive risk is sound, then non-epistemic values can affect not only the level of evidence deemed necessary to accept a hypothesis but also degrees of confirmation themselves. PMID:26386533

  18. Newbery Medal Acceptance.

    ERIC Educational Resources Information Center

    Freedman, Russell

    1988-01-01

    Presents the Newbery Medal acceptance speech of Russell Freedman, writer of children's nonfiction. Discusses the place of nonfiction in the world of children's literature, the evolution of children's biographies, and the author's work on "Lincoln." (ARH)

  19. Newbery Medal Acceptance.

    ERIC Educational Resources Information Center

    Cleary, Beverly

    1984-01-01

    Reprints the text of Ms. Cleary's Newbery medal acceptance speech in which she gives personal history concerning her development as a writer and her response to the letters she receives from children. (CRH)

  20. Caldecott Medal Acceptance.

    ERIC Educational Resources Information Center

    Provensen, Alice; Provensen, Martin

    1984-01-01

    Reprints the text of the Provensens' Caldecott medal acceptance speech in which they describe their early interest in libraries and literature, the collaborative aspect of their work, and their current interest in aviation. (CRH)

  1. Advanced Turbine Systems Program industrial system concept development

    SciTech Connect

    Gates, S.

    1995-12-31

    Solar approached Phase II of ATS program with the goal of 50% thermal efficiency. An intercolled and recuperated gas turbine was identified as the ultimate system to meet this goal in a commercial gas turbine environment. With commercial input from detailed market studies and DOE`s ATS program, Solar redefined the company`s proposed ATS to fit both market and sponsor (DOE) requirements. Resulting optimized recuperated gas turbine will be developed in two sizes, 5 and 15 MWe. It will show a thermal efficiency of about 43%, a 23% improvement over current industrial gas turbines. Other ATS goals--emissions, RAMD (reliability, availability, maintainability, durability), cost of power--will be met or exceeded. During FY95, advanced development of key materials, combustion and component technologies proceeded to the point of acceptance for inclusion in ATS Phase III.

  2. Demonstration and evaluation of gas turbine transit buses

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The Gas Turbine Transit Bus Demonstration Program was designed to demonstrate and evaluate the operation of gas turbine engines in transit coaches in revenue service compared with diesel powered coaches. The main objective of the program was to accelerate development and commercialization of automotive gas turbines. The benefits from the installation of this engine in a transit coach were expected to be reduced weight, cleaner exhaust emissions, lower noise levels, reduced engine vibration and maintenance requirements, improved reliability and vehicle performance, greater engine braking capability, and superior cold weather starting. Four RTS-II advanced design transit coaches were converted to gas turbine power using engines and transmissions. Development, acceptance, performance and systems tests were performed on the coaches prior to the revenue service demonstration.

  3. Numerical investigation of wind turbine and wind farm aerodynamics

    NASA Astrophysics Data System (ADS)

    Selvaraj, Suganthi

    A numerical method based on the solution of Reynolds Averaged Navier Stokes equations and actuator disk representation of turbine rotor is developed and implemented in the OpenFOAM software suite for aerodynamic analysis of horizontal axis wind turbines (HAWT). The method and the implementation are validated against the 1-D momentum theory, the blade element momentum theory and against experimental data. The model is used for analyzing aerodynamics of a novel dual rotor wind turbine concept and wind farms. Horizontal axis wind turbines suffer from aerodynamic inefficiencies in the blade root region (near the hub) due to several non-aerodynamic constraints (e.g., manufacturing, transportation, cost, etc.). A new dual-rotor wind turbine (DRWT) concept is proposed that aims at mitigating these losses. A DRWT is designed using an existing turbine rotor for the main rotor (Risoe turbine and NREL 5 MW turbine), while the secondary rotor is designed using a high lift to drag ratio airfoil (the DU 96 airfoil from TU Delft). The numerical aerodynamic analysis method developed as a part of this thesis is used to optimize the design. The new DRWT design gives an improvement of about 7% in aerodynamic efficiency over the single rotor turbine. Wind turbines are typically deployed in clusters called wind farms. HAWTs also suffer from aerodynamic losses in a wind farm due to interactions with wind turbine wakes. An interesting mesoscale meteorological phenomenon called "surface flow convergence" believed to be caused by wind turbine arrays is investigated using the numerical method developed here. This phenomenon is believed to be caused by the pressure gradient set up by wind turbines operating in close proximity in a farm. A conceptual/hypothetical wind farm simulation validates the hypothesis that a pressure gradient is setup in wind farms due to turbines and that it can cause flow veering of the order of 10 degrees. Simulations of a real wind farm (Story County) are also

  4. Terry turbine controls guide

    SciTech Connect

    Golas, R.S. . Steam Turbine Motor and Generator Div.); Wheeler, K.A. )

    1990-09-01

    While utility experience with Terry turbines has been positive, controls and adjustments of controls have required frequent attention. This technical guide addresses the Terry turbine controls, such as trip system, throttle valve linkage and governors. This guide will familiarize personnel who have not had prior experience with the design, organization and setup of these control systems. This document provides instructions for a broad range of utility personnel on optimum methods for the repair, maintenance, adjustment, and troubleshooting of the Terry turbine controls. The guide includes an engineering description of the operation and prevalent failure mechanisms, preventive and predictive maintenance suggestions, repair and adjustment methods, and spare parts recommendations. This guide will be a standalone updated reference manual. It will include drawings and descriptions affecting all required maintenance on the control system, and does not cover site specific appurtenances. Included are both generic and specific recommendations for utility maintenance engineers and technicians. These recommendations will help implement an effective maintenance or upgrade program for Terry turbine controls. This guide is a valuable resource for operating history and common control related problems. The preparation of this manual included the review of the applicable INPO Standby Turbine-Driven Pump Operating Experience Compilation. Individual utilities can use this guide to review their specific maintenance practices and develop improved procedures where applicable. The guide can also be used by some utilities to upgrade their Terry turbine control system. The guide is applicable to the nuclear industry and any other industry utilizing the Terry turbine models included in the document.

  5. Advanced turbine design for coal-fueled engines

    SciTech Connect

    Wagner, J.H.; Johnson, B.V.

    1993-04-01

    The investigators conclude that: (1) Turbine erosion resistance was shown to be improved by a factor of 5 by varying the turbine design. Increasing the number of stages and increasing the mean radius reduces the peak predicted erosion rates for 2-D flows on the blade airfoil from values which are 6 times those of the vane to values of erosion which are comparable to those of the vane airfoils. (2) Turbine erosion was a strong function of airfoil shape depending on particle diameter. Different airfoil shapes for the same turbine operating condition resulted in a factor of 7 change in airfoil erosion for the smallest particles studied (5 micron). (3) Predicted erosion for the various turbines analyzed was a strong function of particle diameter and weaker function of particle density. (4) Three dimensional secondary flows were shown to cause increases in peak and average erosion on the vane and blade airfoils. Additionally, the interblade secondary flows and stationary outer case caused unique erosion patterns which were not obtainable with 2-D analyses. (5) Analysis of the results indicate that hot gas cleanup systems are necessary to achieve acceptable turbine life in direct-fired, coal-fueled systems. In addition, serious consequences arise when hot gas filter systems fail for even short time periods. For a complete failure of the filter system, a 0.030 in. thick corrosion-resistant protective coating on a turbine blade would be eroded at some locations within eight minutes.

  6. On the biological plausibility of Wind Turbine Syndrome.

    PubMed

    Harrison, Robert V

    2015-01-01

    An emerging environmental health issue relates to potential ill-effects of wind turbine noise. There have been numerous suggestions that the low-frequency acoustic components in wind turbine signals can cause symptoms associated with vestibular system disorders, namely vertigo, nausea, and nystagmus. This constellation of symptoms has been labeled as Wind Turbine Syndrome, and has been identified in case studies of individuals living close to wind farms. This review discusses whether it is biologically plausible for the turbine noise to stimulate the vestibular parts of the inner ear and, by extension, cause Wind Turbine Syndrome. We consider the sound levels that can activate the semicircular canals or otolith end organs in normal subjects, as well as in those with preexisting conditions known to lower vestibular threshold to sound stimulation. PMID:25295915

  7. Gas turbine combustor transition

    DOEpatents

    Coslow, Billy Joe; Whidden, Graydon Lane

    1999-01-01

    A method of converting a steam cooled transition to an air cooled transition in a gas turbine having a compressor in fluid communication with a combustor, a turbine section in fluid communication with the combustor, the transition disposed in a combustor shell and having a cooling circuit connecting a steam outlet and a steam inlet and wherein hot gas flows from the combustor through the transition and to the turbine section, includes forming an air outlet in the transition in fluid communication with the cooling circuit and providing for an air inlet in the transition in fluid communication with the cooling circuit.

  8. Gas turbine combustor transition

    DOEpatents

    Coslow, B.J.; Whidden, G.L.

    1999-05-25

    A method is described for converting a steam cooled transition to an air cooled transition in a gas turbine having a compressor in fluid communication with a combustor, a turbine section in fluid communication with the combustor, the transition disposed in a combustor shell and having a cooling circuit connecting a steam outlet and a steam inlet and wherein hot gas flows from the combustor through the transition and to the turbine section, includes forming an air outlet in the transition in fluid communication with the cooling circuit and providing for an air inlet in the transition in fluid communication with the cooling circuit. 7 figs.

  9. Estimating turbine limit load

    NASA Technical Reports Server (NTRS)

    Glassman, Arthur J.

    1993-01-01

    A method for estimating turbine limit-load pressure ratio from turbine map information is presented and demonstrated. It is based on a mean line analysis at the last-rotor exit. The required map information includes choke flow rate at all speeds as well as pressure ratio and efficiency at the onset of choke at design speed. One- and two-stage turbines are analyzed to compare the results with those from a more rigorous off-design flow analysis and to show the sensitivities of the computed limit-load pressure ratios to changes in the key assumptions.

  10. Aviation turbine fuels, 1980

    SciTech Connect

    Shelton, E M

    1981-03-01

    Properties of some aviation turbine fuels marketed in the United States during 1980 are presented in this report. The samples represented are typical 1980 production and were analyzed in the laboratories of 17 manufacturers of aviation turbine (jet) fuels. The data were submitted for study, calculation, and compilation under a cooperative agreement between the Department of Energy (DOE), Bartlesville Energy Technology Center (BETC), Bartlesville, Oklahoma, and the American Petroleum Institute (API). Results for the properties of 98 samples of aviation turbine fuels are included in the report for military grades JP-4 and JP-5 and commercial type Jet A.

  11. Composite turbine bucket assembly

    DOEpatents

    Liotta, Gary Charles; Garcia-Crespo, Andres

    2014-05-20

    A composite turbine blade assembly includes a ceramic blade including an airfoil portion, a shank portion and an attachment portion; and a transition assembly adapted to attach the ceramic blade to a turbine disk or rotor, the transition assembly including first and second transition components clamped together, trapping said ceramic airfoil therebetween. Interior surfaces of the first and second transition portions are formed to mate with the shank portion and the attachment portion of the ceramic blade, and exterior surfaces of said first and second transition components are formed to include an attachment feature enabling the transition assembly to be attached to the turbine rotor or disk.

  12. Wind turbine acoustics

    NASA Technical Reports Server (NTRS)

    Hubbard, Harvey H.; Shepherd, Kevin P.

    1990-01-01

    Available information on the physical characteristics of the noise generated by wind turbines is summarized, with example sound pressure time histories, narrow- and broadband frequency spectra, and noise radiation patterns. Reviewed are noise measurement standards, analysis technology, and a method of characterizing wind turbine noise. Prediction methods are given for both low-frequency rotational harmonics and broadband noise components. Also included are atmospheric propagation data showing the effects of distance and refraction by wind shear. Human perception thresholds, based on laboratory and field tests, are given. Building vibration analysis methods are summarized. The bibliography of this report lists technical publications on all aspects of wind turbine acoustics.

  13. Turbine blade vibration dampening

    DOEpatents

    Cornelius, C.C.; Pytanowski, G.P.; Vendituoli, J.S.

    1997-07-08

    The present turbine wheel assembly increases component life and turbine engine longevity. The combination of the strap and the opening combined with the preestablished area of the outer surface of the opening and the preestablished area of the outer circumferential surface of the strap and the friction between the strap and the opening increases the life and longevity of the turbine wheel assembly. Furthermore, the mass ``M`` or combined mass ``CM`` of the strap or straps and the centrifugal force assist in controlling vibrations and damping characteristics. 5 figs.

  14. Turbine blade vibration dampening

    DOEpatents

    Cornelius, Charles C.; Pytanowski, Gregory P.; Vendituoli, Jonathan S.

    1997-07-08

    The present turbine wheel assembly increases component life and turbine engine longevity. The combination of the strap and the opening combined with the preestablished area of the outer surface of the opening and the preestablished area of the outer circumferential surface of the strap and the friction between the strap and the opening increases the life and longevity of the turbine wheel assembly. Furthermore, the mass "M" or combined mass "CM" of the strap or straps and the centrifugal force assist in controlling vibrations and damping characteristics.

  15. Advanced turbine design for coal-fueled engines. Phase 1, Erosion of turbine hot gas path blading: Final report

    SciTech Connect

    Wagner, J.H.; Johnson, B.V.

    1993-04-01

    The investigators conclude that: (1) Turbine erosion resistance was shown to be improved by a factor of 5 by varying the turbine design. Increasing the number of stages and increasing the mean radius reduces the peak predicted erosion rates for 2-D flows on the blade airfoil from values which are 6 times those of the vane to values of erosion which are comparable to those of the vane airfoils. (2) Turbine erosion was a strong function of airfoil shape depending on particle diameter. Different airfoil shapes for the same turbine operating condition resulted in a factor of 7 change in airfoil erosion for the smallest particles studied (5 micron). (3) Predicted erosion for the various turbines analyzed was a strong function of particle diameter and weaker function of particle density. (4) Three dimensional secondary flows were shown to cause increases in peak and average erosion on the vane and blade airfoils. Additionally, the interblade secondary flows and stationary outer case caused unique erosion patterns which were not obtainable with 2-D analyses. (5) Analysis of the results indicate that hot gas cleanup systems are necessary to achieve acceptable turbine life in direct-fired, coal-fueled systems. In addition, serious consequences arise when hot gas filter systems fail for even short time periods. For a complete failure of the filter system, a 0.030 in. thick corrosion-resistant protective coating on a turbine blade would be eroded at some locations within eight minutes.

  16. [Implementation of preventive measures recommended by the federal public health office and acceptance of advice by managers of commercial solaria--studies by the public health office of the Ammerland district].

    PubMed

    Dahmen, H G

    1990-06-01

    Commercial solaria are not always up to the standards that would be desirable from a Public Health point of view in respect of protection of users against health hazards of exposure to UV radiation, and also with regard to supervision, qualified personal advice given to users by the staff, and qualification of the staff members to give such advice. Hygiene is definitely also a problem, as is evident from bacteriological swabs made from tanning beds. However, the talks conducted by a local Public Health board in Lower Saxony (North Germany) revealed considerable open-mindedness on the part of the entrepreneurs who were quite willing to follow expert health advice and to display a poster with recommendations regarding protective measures. This was combined with a questioning procedure that has proved successful with the proprietors. PMID:2143008

  17. Turbine instabilities: Case histories

    NASA Technical Reports Server (NTRS)

    Laws, C. W.

    1985-01-01

    Several possible causes of turbine rotor instability are discussed and the related design features of a wide range of turbomachinery types and sizes are considered. The instrumentation options available for detecting rotor instability and assessing its severity are also discussed.

  18. Variables in turbine erosion

    NASA Technical Reports Server (NTRS)

    Baughman, J. R.; Spies, R.

    1970-01-01

    Study of impact erosion in the operation of turbomachinery is undertaken to predict the results for particular designs. The test program investigates the effects of turbine stator blade shape, rotor blade shape, and variations in test conditions.

  19. Gas turbine engine

    DOEpatents

    Lawlor, Shawn P.; Roberts, II, William Byron

    2016-03-08

    A gas turbine engine with a compressor rotor having compressor impulse blades that delivers gas at supersonic conditions to a stator. The stator includes a one or more aerodynamic ducts that each have a converging portion and a diverging portion for deceleration of the selected gas to subsonic conditions and to deliver a high pressure oxidant containing gas to flameholders. The flameholders may be provided as trapped vortex combustors, for combustion of a fuel to produce hot pressurized combustion gases. The hot pressurized combustion gases are choked before passing out of an aerodynamic duct to a turbine. Work is recovered in a turbine by expanding the combustion gases through impulse blades. By balancing the axial loading on compressor impulse blades and turbine impulse blades, asymmetrical thrust is minimized or avoided.

  20. Radial turbine cooling

    NASA Technical Reports Server (NTRS)

    Roelke, Richard J.

    1992-01-01

    Radial turbines have been used extensively in many applications including small ground based electrical power generators, automotive engine turbochargers and aircraft auxiliary power units. In all of these applications the turbine inlet temperature is limited to a value commensurate with the material strength limitations and life requirements of uncooled metal rotors. To take advantage of all the benefits that higher temperatures offer, such as increased turbine specific power output or higher cycle thermal efficiency, requires improved high temperature materials and/or blade cooling. Extensive research is on-going to advance the material properties of high temperature superalloys as well as composite materials including ceramics. The use of ceramics with their high temperature potential and low cost is particularly appealing for radial turbines. However until these programs reach fruition the only way to make significant step increases beyond the present material temperature barriers is to cool the radial blading.

  1. Turbines in the sky

    SciTech Connect

    Boyle, R.V.; Riple, J.C.

    1987-07-01

    Gas turbines are being investigated as power sources for the proposed Star Wars weapons flatforms. The gas turbine engine offers the best opportunity for exploiting the high-temperature potential of both nuclear and chemical combustion. The use of mature gas turbine technology and existing materials would result in highly reliable PCUs capable of meeting SDI's requirements. However, operation under the temperature limits imposed by existing materials would result in a prohibitively heavy system. Cooled blades would somewhat increase temperature capability; however the turbine's mass, though reduced, would still be unacceptably large. The greatest improvements would result from the ability to operate at temperatures of up to 2000 K, pressures up to 14 MPa, and stress up to 690 MPa.

  2. Turbine nozzle positioning system

    DOEpatents

    Norton, Paul F.; Shaffer, James E.

    1996-01-30

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes an outer shroud having a mounting leg with an opening defined therein, a tip shoe ring having a mounting member with an opening defined therein, a nozzle support ring having a plurality of holes therein and a pin positioned in the corresponding opening in the outer shroud, opening in the tip shoe ring and the hole in the nozzle support ring. A rolling joint is provided between metallic components of the gas turbine engine and the nozzle guide vane assembly. The nozzle guide vane assembly is positioned radially about a central axis of the gas turbine engine and axially aligned with a combustor of the gas turbine engine.

  3. Turbine nozzle positioning system

    DOEpatents

    Norton, P.F.; Shaffer, J.E.

    1996-01-30

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes an outer shroud having a mounting leg with an opening defined therein, a tip shoe ring having a mounting member with an opening defined therein, a nozzle support ring having a plurality of holes therein and a pin positioned in the corresponding opening in the outer shroud, opening in the tip shoe ring and the hole in the nozzle support ring. A rolling joint is provided between metallic components of the gas turbine engine and the nozzle guide vane assembly. The nozzle guide vane assembly is positioned radially about a central axis of the gas turbine engine and axially aligned with a combustor of the gas turbine engine. 9 figs.

  4. Radial turbine cooling

    NASA Astrophysics Data System (ADS)

    Roelke, Richard J.

    The technology of high temperature cooled radial turbines is reviewed. Aerodynamic performance considerations are described. Heat transfer and structural analysis are addressed, and in doing so the following topics are covered: cooling considerations, hot side convection, coolant side convection, and rotor mechanical analysis. Cooled rotor concepts and fabrication are described, and the following are covered in this context: internally cooled rotor, hot isostatic pressure bonded rotor, laminated rotor, split blade rotor, and the NASA radial turbine program.

  5. Radial turbine cooling

    NASA Technical Reports Server (NTRS)

    Roelke, Richard J.

    1992-01-01

    The technology of high temperature cooled radial turbines is reviewed. Aerodynamic performance considerations are described. Heat transfer and structural analysis are addressed, and in doing so the following topics are covered: cooling considerations, hot side convection, coolant side convection, and rotor mechanical analysis. Cooled rotor concepts and fabrication are described, and the following are covered in this context: internally cooled rotor, hot isostatic pressure bonded rotor, laminated rotor, split blade rotor, and the NASA radial turbine program.

  6. New technology in turbine aerodynamics.

    NASA Technical Reports Server (NTRS)

    Glassman, A. J.; Moffitt, T. P.

    1972-01-01

    Cursory review of some recent work that has been done in turbine aerodynamic research. Topics discussed include the aerodynamic effect of turbine coolant, high work-factor (ratio of stage work to square of blade speed) turbines, and computer methods for turbine design and performance prediction. Experimental cooled-turbine aerodynamics programs using two-dimensional cascades, full annular cascades, and cold rotating turbine stage tests are discussed with some typical results presented. Analytically predicted results for cooled blade performance are compared to experimental results. The problems and some of the current programs associated with the use of very high work factors for fan-drive turbines of high-bypass-ratio engines are discussed. Computer programs have been developed for turbine design-point performance, off-design performance, supersonic blade profile design, and the calculation of channel velocities for subsonic and transonic flowfields. The use of these programs for the design and analysis of axial and radial turbines is discussed.

  7. Wind Turbine Box - energy fluxes around a characteristic wind turbine

    NASA Astrophysics Data System (ADS)

    Calaf, Marc; Cortina, Gerard; Sharma, Varun

    2015-11-01

    This research project presents a new tool, so called ``Wind Turbine Box'', that allows for the direct comparison between the flow around a single wind turbine and the flow around a characteristic wind turbine immersed within a large wind farm. The Wind Turbine Box consists of a limited control volume defined around each wind turbine that is timely co-aligned with each corresponding turbine's yaw-angle. Hence it is possible to extract flow statistics around each wind turbine, regardless of whether the turbine is fully isolated or it is plunged within a large wind farm. The Wind Turbine Box tool has been used to compute the energy fluxes around a characteristic wind turbine of a large wind farm to better understand the wake replenishment processes throughout a complete diurnal cycle. The effective loading of the wind farm has been gradually increased, ranging from quasi-isolated wind turbines to a highly packed wind farm. For this purpose, several Large Eddy Simulations have been run, forced with a constant geostrophic wind and a time varying surface temperature extracted from a selected period of the CASES-99 field experiment. Results illustrate the differences in the flow dynamics as it evolves around a characteristic wind turbine within a large wind farm and its asymptotic transition to the fully developed wind turbine array boundary layer.

  8. Turbine Design and Application, Volume 3

    NASA Technical Reports Server (NTRS)

    Glassman, A. J. (Editor)

    1975-01-01

    Turbine technology concepts for thermodynamic and fluid dynamics are presented along with velocity diagrams, losses, mechanical design, operation and performance. Designs discussed include: supersonic turbines, radial-inflow turbines, and turbine cooling.

  9. Accept or divert?

    PubMed

    Angelucci, P A

    1999-09-01

    Stretching scarce resources is more than a managerial issue. Should you accept the patient to an understaffed ICU or divert him to another facility? The intense "medical utility" controversy focuses on a situation that critical care nurses now face every day. PMID:10614370

  10. 1984 Newbery Acceptance Speech.

    ERIC Educational Resources Information Center

    Cleary, Beverly

    1984-01-01

    This acceptance speech for an award honoring "Dear Mr. Henshaw," a book about feelings of a lonely child of divorce intended for eight-, nine-, and ten-year-olds, highlights children's letters to author. Changes in society that affect children, the inception of "Dear Mr. Henshaw," and children's reactions to books are highlighted. (EJS)

  11. Why was Relativity Accepted?

    NASA Astrophysics Data System (ADS)

    Brush, S. G.

    Historians of science have published many studies of the reception of Einstein's special and general theories of relativity. Based on a review of these studies, and my own research on the role of the light-bending prediction in the reception of general relativity, I discuss the role of three kinds of reasons for accepting relativity (1) empirical predictions and explanations; (2) social-psychological factors; and (3) aesthetic-mathematical factors. According to the historical studies, acceptance was a three-stage process. First, a few leading scientists adopted the special theory for aesthetic-mathematical reasons. In the second stage, their enthusiastic advocacy persuaded other scientists to work on the theory and apply it to problems currently of interest in atomic physics. The special theory was accepted by many German physicists by 1910 and had begun to attract some interest in other countries. In the third stage, the confirmation of Einstein's light-bending prediction attracted much public attention and forced all physicists to take the general theory of relativity seriously. In addition to light-bending, the explanation of the advance of Mercury's perihelion was considered strong evidence by theoretical physicists. The American astronomers who conducted successful tests of general relativity became defenders of the theory. There is little evidence that relativity was `socially constructed' but its initial acceptance was facilitated by the prestige and resources of its advocates.

  12. UGV acceptance testing

    NASA Astrophysics Data System (ADS)

    Kramer, Jeffrey A.; Murphy, Robin R.

    2006-05-01

    With over 100 models of unmanned vehicles now available for military and civilian safety, security or rescue applications, it is important to for agencies to establish acceptance testing. However, there appears to be no general guidelines for what constitutes a reasonable acceptance test. This paper describes i) a preliminary method for acceptance testing by a customer of the mechanical and electrical components of an unmanned ground vehicle system, ii) how it has been applied to a man-packable micro-robot, and iii) discusses the value of testing both to ensure that the customer has a workable system and to improve design. The test method automated the operation of the robot to repeatedly exercise all aspects and combinations of components on the robot for 6 hours. The acceptance testing process uncovered many failures consistent with those shown to occur in the field, showing that testing by the user does predict failures. The process also demonstrated that the testing by the manufacturer can provide important design data that can be used to identify, diagnose, and prevent long-term problems. Also, the structured testing environment showed that sensor systems can be used to predict errors and changes in performance, as well as uncovering unmodeled behavior in subsystems.

  13. 76. TURBINE HALL, UNIT 2 SHOWING BOTH TURBINE AND CONDENSER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    76. TURBINE HALL, UNIT 2 SHOWING BOTH TURBINE AND CONDENSER (SEE ALSO, DRAWING No. 12 OF 13) - Delaware County Electric Company, Chester Station, Delaware River at South end of Ward Street, Chester, Delaware County, PA

  14. 40. VIEW OF TURBINE HALL LOOKING SOUTHWEST AT WESTINGHOUSEPARSONS TURBINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    40. VIEW OF TURBINE HALL LOOKING SOUTHWEST AT WESTINGHOUSE-PARSONS TURBINE NUMBER 2. THIS UNIT WAS INSTALLED IN 1925. - New York, New Haven & Hartford Railroad, Cos Cob Power Plant, Sound Shore Drive, Greenwich, Fairfield County, CT

  15. Measurements and observations of noise from a 4.2 megawatt (WTS-4) wind turbine generator

    NASA Technical Reports Server (NTRS)

    Shepherd, K. P.; Hubbard, H. H.

    1983-01-01

    Noise measurements and calculations are being made for large wind turbine generators to develop a data base for use in designing and siting such systems for community acceptance. As part of this program, measurements were made on the WTS-4 wind turbine generator during its acceptance runs. This paper presents the results of these exploratory measurements for power output conditions in the range 1.0 to 4.2 MW. Data include noise levels, spectra, radiation patterns, effects of distance, and the associated perception thresholds for use in the further development of acceptance criteria for this type of machine.

  16. Turbine inner shroud and turbine assembly containing such inner shroud

    DOEpatents

    Bagepalli, Bharat Sampathkumaran; Corman, Gregory Scot; Dean, Anthony John; DiMascio, Paul Stephen; Mirdamadi, Massoud

    2001-01-01

    A turbine inner shroud and a turbine assembly. The turbine assembly includes a turbine stator having a longitudinal axis and having an outer shroud block with opposing and longitudinally outward facing first and second sides having open slots. A ceramic inner shroud has longitudinally inward facing hook portions which can longitudinally and radially surround a portion of the sides of the outer shroud block. In one attachment, the hook portions are engageable with, and are positioned within, the open slots.

  17. NEXT GENERATION TURBINE SYSTEM STUDY

    SciTech Connect

    Frank Macri

    2002-02-28

    Rolls-Royce has completed a preliminary design and marketing study under a Department of Energy (DOE) cost shared contract (DE-AC26-00NT40852) to analyze the feasibility of developing a clean, high efficiency, and flexible Next Generation Turbine (NGT) system to meet the power generation market needs of the year 2007 and beyond. Rolls-Royce evaluated the full range of its most advanced commercial aerospace and aeroderivative engines alongside the special technologies necessary to achieve the aggressive efficiency, performance, emissions, economic, and flexibility targets desired by the DOE. Heavy emphasis was placed on evaluating the technical risks and the economic viability of various concept and technology options available. This was necessary to ensure the resulting advanced NGT system would provide extensive public benefits and significant customer benefits without introducing unacceptable levels of technical and operational risk that would impair the market acceptance of the resulting product. Two advanced cycle configurations were identified as offering significant advantages over current combined cycle products available in the market. In addition, balance of plant (BOP) technologies, as well as capabilities to improve the reliability, availability, and maintainability (RAM) of industrial gas turbine engines, have been identified. A customer focused survey and economic analysis of a proposed Rolls-Royce NGT product configuration was also accomplished as a part of this research study. The proposed Rolls-Royce NGT solution could offer customers clean, flexible power generation systems with very high efficiencies, similar to combined cycle plants, but at a much lower specific cost, similar to those of simple cycle plants.

  18. 42 CFR 35.65 - Acceptable personal property.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Acceptable personal property. 35.65 Section 35.65 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICAL CARE AND EXAMINATIONS HOSPITAL AND STATION MANAGEMENT Contributions for the Benefit of Patients § 35.65...

  19. 42 CFR 35.65 - Acceptable personal property.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Acceptable personal property. 35.65 Section 35.65 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICAL CARE AND EXAMINATIONS HOSPITAL AND STATION MANAGEMENT Contributions for the Benefit of Patients § 35.65...

  20. 42 CFR 35.65 - Acceptable personal property.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Acceptable personal property. 35.65 Section 35.65 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICAL CARE AND EXAMINATIONS HOSPITAL AND STATION MANAGEMENT Contributions for the Benefit of Patients § 35.65...

  1. Combustion Sensors: Gas Turbine Applications

    NASA Technical Reports Server (NTRS)

    Human, Mel

    2002-01-01

    This report documents efforts to survey the current research directions in sensor technology for gas turbine systems. The work is driven by the current and future requirements on system performance and optimization. Accurate real time measurements of velocities, pressure, temperatures, and species concentrations will be required for objectives such as combustion instability attenuation, pollutant reduction, engine health management, exhaust profile control via active control, etc. Changing combustor conditions - engine aging, flow path slagging, or rapid maneuvering - will require adaptive responses; the effectiveness of such will be only as good as the dynamic information available for processing. All of these issues point toward the importance of continued sensor development. For adequate control of the combustion process, sensor data must include information about the above mentioned quantities along with equivalence ratios and radical concentrations, and also include both temporal and spatial velocity resolution. Ultimately these devices must transfer from the laboratory to field installations, and thus must become low weight and cost, reliable and maintainable. A primary conclusion from this study is that the optics-based sensor science will be the primary diagnostic in future gas turbine technologies.

  2. Ceramic stationary gas turbine

    SciTech Connect

    Roode, M. van

    1995-10-01

    The performance of current industrial gas turbines is limited by the temperature and strength capabilities of the metallic structural materials in the engine hot section. Because of their superior high-temperature strength and durability, ceramics can be used as structural materials for hot section components (blades, nozzles, combustor liners) in innovative designs at increased turbine firing temperatures. The benefits include the ability to increase the turbine inlet temperature (TIT) to about 1200{degrees}C ({approx}2200{degrees}F) or more with uncooled ceramics. It has been projected that fully optimized stationary gas turbines would have a {approx}20 percent gain in thermal efficiency and {approx}40 percent gain in output power in simple cycle compared to all metal-engines with air-cooled components. Annual fuel savings in cogeneration in the U.S. would be on the order of 0.2 Quad by 2010. Emissions reductions to under 10 ppmv NO{sub x} are also forecast. This paper describes the progress on a three-phase, 6-year program sponsored by the U.S. Department of Energy, Office of Industrial Technologies, to achieve significant performance improvements and emissions reductions in stationary gas turbines by replacing metallic hot section components with ceramic parts. Progress is being reported for the period September 1, 1994, through September 30, 1995.

  3. Ceramic stationary gas turbine

    SciTech Connect

    Roode, M. van

    1995-12-31

    The performance of current industrial gas turbines is limited by the temperature and strength capabilities of the metallic structural materials in the engine hot section. Because of their superior high-temperature strength and durability, ceramics can be used as structural materials for hot section components (blades, nozzles, combustor liners) in innovative designs at increased turbine firing temperatures. The benefits include the ability to increase the turbine inlet temperature (TIT) to about 1200{degrees}C ({approx}2200{degrees}F) or more with uncooled ceramics. It has been projected that fully optimized stationary gas turbines would have a {approx}20 percent gain in thermal efficiency and {approx}40 percent gain in output power in simple cycle compared to all metal-engines with air-cooled components. Annual fuel savings in cogeneration in the U.S. would be on the order of 0.2 Quad by 2010. Emissions reductions to under 10 ppmv NO{sub x} are also forecast. This paper describes the progress on a three-phase, 6-year program sponsored by the U.S. Department of Energy, Office of Industrial Technologies, to achieve significant performance improvements and emissions reductions in stationary gas turbines by replacing metallic hot section components with ceramic parts. Progress is being reported for the period September 1, 1994, through September 30, 1995.

  4. Floating wind turbine system

    NASA Technical Reports Server (NTRS)

    Viterna, Larry A. (Inventor)

    2009-01-01

    A floating wind turbine system with a tower structure that includes at least one stability arm extending therefrom and that is anchored to the sea floor with a rotatable position retention device that facilitates deep water installations. Variable buoyancy for the wind turbine system is provided by buoyancy chambers that are integral to the tower itself as well as the stability arm. Pumps are included for adjusting the buoyancy as an aid in system transport, installation, repair and removal. The wind turbine rotor is located downwind of the tower structure to allow the wind turbine to follow the wind direction without an active yaw drive system. The support tower and stability arm structure is designed to balance tension in the tether with buoyancy, gravity and wind forces in such a way that the top of the support tower leans downwind, providing a large clearance between the support tower and the rotor blade tips. This large clearance facilitates the use of articulated rotor hubs to reduced damaging structural dynamic loads. Major components of the turbine can be assembled at the shore and transported to an offshore installation site.

  5. Ceramics for ATS industrial turbines

    SciTech Connect

    Wenglarz, R.; Ali, S.; Layne, A.

    1996-05-01

    US DOE and most US manufacturers of stationary gas turbines are participating in a major national effort to develop advanced turbine systems (ATS). The ATS program will achieve ultrahigh efficiencies, environmental superiority, and cost competitiveness compared with current combustion turbine systems. A major factor in the improved efficiencies of simple cycle ATS gas turbines will be higher operating efficiencies than curren engines. These temperatures strain the limits of metallic alloy and flow-path cooling technologies. Ceramics materials offer a potential alterative to cooled turbine alloys for ATS turbines due to higher melting points than metallics. This paper evaluates ceramics technology and plant economic issues for ATS industrial turbine systems. A program with the objective of demonstrating first-stage ceramic vanes in a commerical industrial turbine is also described.

  6. Torque ripple in a Darrieus, vertical axis wind turbine

    SciTech Connect

    Reuter, R.C. Jr.

    1980-01-01

    Interaction between a steady wind and a rotating, Darrieus, vertical axis wind turbine produces time periodic aerodynamic loads which cause time dependent torque variations, referred to as torque ripple, to occur in the mechanical link between the turbine and the electrical generator. There is concern for the effect of torque ripple upon fatigue life of drive train components and upon power quality. An analytical solution characterizing the phenomenon of torque ripple has been obtained which is based upon a Fourier expansion of the time dependent features of the problem. Numerical results for torque ripple, some experimental data, determination of acceptable levels and methods of controlling it, are presented and discussed.

  7. Lean, premixed, prevaporized combustion for aircraft gas turbine engines

    NASA Technical Reports Server (NTRS)

    Mularz, E. J.

    1979-01-01

    The application of lean, premixed, prevaporized combustion to aircraft turbine engine systems can result in benefits in terms of superior combustion performance, improved combustor and turbine durability, and environmentally acceptable pollutant emissions. Lean, premixed prevaporized combustion is particularly attractive for reducing the oxides of nitrogen emissions during high altitude cruise. The NASA stratospheric cruise emission reduction program will evolve and demonstrate lean, premixed, prevaporized combustion technology for aircraft engines. This multiphased program is described. In addition, the various elements of the fundamental studies phase of the program are reviewed, and results to date of many of these studies are summarized.

  8. An automotive transmission for automotive gas turbine power plants

    NASA Technical Reports Server (NTRS)

    Polak, J. C.

    1980-01-01

    A joint government-industry program was initiated to investigate the two-shaft gas turbine concept as an alternative to present-day automotive powerplants. Both were examined, compared and evaluated on the basis of the federal automotive driving cycle in terms of specific fuel/power/speed characteristics of the engine and the efficiency and performance of the transmission. The results showed that an optimum match of vehicle, gas turbine engine, and conventional automatic transmission is capable of a significant improvement in fuel economy. This system offers many advantages that should lead to its wide acceptance in future vehicles.

  9. Fuzzy Regulator Design for Wind Turbine Yaw Control

    PubMed Central

    Koulouras, Grigorios

    2014-01-01

    This paper proposes the development of an advanced fuzzy logic controller which aims to perform intelligent automatic control of the yaw movement of wind turbines. The specific fuzzy controller takes into account both the wind velocity and the acceptable yaw error correlation in order to achieve maximum performance efficacy. In this way, the proposed yaw control system is remarkably adaptive to the existing conditions. In this way, the wind turbine is enabled to retain its power output close to its nominal value and at the same time preserve its yaw system from pointless movement. Thorough simulation tests evaluate the proposed system effectiveness. PMID:24693237

  10. Acceptability of human risk.

    PubMed Central

    Kasperson, R E

    1983-01-01

    This paper has three objectives: to explore the nature of the problem implicit in the term "risk acceptability," to examine the possible contributions of scientific information to risk standard-setting, and to argue that societal response is best guided by considerations of process rather than formal methods of analysis. Most technological risks are not accepted but are imposed. There is also little reason to expect consensus among individuals on their tolerance of risk. Moreover, debates about risk levels are often at base debates over the adequacy of the institutions which manage the risks. Scientific information can contribute three broad types of analyses to risk-setting deliberations: contextual analysis, equity assessment, and public preference analysis. More effective risk-setting decisions will involve attention to the process used, particularly in regard to the requirements of procedural justice and democratic responsibility. PMID:6418541

  11. Evaluating the Effectiveness of an Ultrasonic Acoustic Deterrent for Reducing Bat Fatalities at Wind Turbines.

    PubMed

    Arnett, Edward B; Hein, Cris D; Schirmacher, Michael R; Huso, Manuela M P; Szewczak, Joseph M

    2013-01-01

    Large numbers of bats are killed by wind turbines worldwide and minimizing fatalities is critically important to bat conservation and acceptance of wind energy development. We implemented a 2-year study testing the effectiveness of an ultrasonic acoustic deterrent for reducing bat fatalities at a wind energy facility in Pennsylvania. We randomly selected control and treatment turbines that were searched daily in summer and fall 2009 and 2010. Estimates of fatality, corrected for field biases, were compared between treatment and control turbines. In 2009, we estimated 21-51% fewer bats were killed per treatment turbine than per control turbine. In 2010, we determined an approximate 9% inherent difference between treatment and control turbines and when factored into our analysis, variation increased and between 2% more and 64% fewer bats were killed per treatment turbine relative to control turbines. We estimated twice as many hoary bats were killed per control turbine than treatment turbine, and nearly twice as many silver-haired bats in 2009. In 2010, although we estimated nearly twice as many hoary bats and nearly 4 times as many silver-haired bats killed per control turbine than at treatment turbines during the treatment period, these only represented an approximate 20% increase in fatality relative to the pre-treatment period for these species when accounting for inherent differences between turbine sets. Our findings suggest broadband ultrasound broadcasts may reduce bat fatalities by discouraging bats from approaching sound sources. However, effectiveness of ultrasonic deterrents is limited by distance and area ultrasound can be broadcast, in part due to rapid attenuation in humid conditions. We caution that an operational deterrent device is not yet available and further modifications and experimentation are needed. Future efforts must also evaluate cost-effectiveness of deterrents in relation to curtailment strategies to allow a cost-benefit analysis for

  12. Evaluation of Blade-Strike Models for Estimating the Biological Performance of Large Kaplan Hydro Turbines

    SciTech Connect

    Deng, Zhiqun; Carlson, Thomas J.; Ploskey, Gene R.; Richmond, Marshall C.

    2005-11-30

    BioIndex testing of hydro-turbines is sought as an analog to the hydraulic index testing conducted on hydro-turbines to optimize their power production efficiency. In BioIndex testing the goal is to identify those operations within the range identified by Index testing where the survival of fish passing through the turbine is maximized. BioIndex testing includes the immediate tailrace region as well as the turbine environment between a turbine's intake trashracks and the exit of its draft tube. The US Army Corps of Engineers and the Department of Energy have been evaluating a variety of means, such as numerical and physical turbine models, to investigate the quality of flow through a hydro-turbine and other aspects of the turbine environment that determine its safety for fish. The goal is to use these tools to develop hypotheses identifying turbine operations and predictions of their biological performance that can be tested at prototype scales. Acceptance of hypotheses would be the means for validation of new operating rules for the turbine tested that would be in place when fish were passing through the turbines. The overall goal of this project is to evaluate the performance of numerical blade strike models as a tool to aid development of testable hypotheses for bioIndexing. Evaluation of the performance of numerical blade strike models is accomplished by comparing predictions of fish mortality resulting from strike by turbine runner blades with observations made using live test fish at mainstem Columbia River Dams and with other predictions of blade strike made using observations of beads passing through a 1:25 scale physical turbine model.

  13. Evaluating the Effectiveness of an Ultrasonic Acoustic Deterrent for Reducing Bat Fatalities at Wind Turbines

    PubMed Central

    Arnett, Edward B.; Hein, Cris D.; Schirmacher, Michael R.; Huso, Manuela M. P.; Szewczak, Joseph M.

    2013-01-01

    Large numbers of bats are killed by wind turbines worldwide and minimizing fatalities is critically important to bat conservation and acceptance of wind energy development. We implemented a 2-year study testing the effectiveness of an ultrasonic acoustic deterrent for reducing bat fatalities at a wind energy facility in Pennsylvania. We randomly selected control and treatment turbines that were searched daily in summer and fall 2009 and 2010. Estimates of fatality, corrected for field biases, were compared between treatment and control turbines. In 2009, we estimated 21–51% fewer bats were killed per treatment turbine than per control turbine. In 2010, we determined an approximate 9% inherent difference between treatment and control turbines and when factored into our analysis, variation increased and between 2% more and 64% fewer bats were killed per treatment turbine relative to control turbines. We estimated twice as many hoary bats were killed per control turbine than treatment turbine, and nearly twice as many silver-haired bats in 2009. In 2010, although we estimated nearly twice as many hoary bats and nearly 4 times as many silver-haired bats killed per control turbine than at treatment turbines during the treatment period, these only represented an approximate 20% increase in fatality relative to the pre-treatment period for these species when accounting for inherent differences between turbine sets. Our findings suggest broadband ultrasound broadcasts may reduce bat fatalities by discouraging bats from approaching sound sources. However, effectiveness of ultrasonic deterrents is limited by distance and area ultrasound can be broadcast, in part due to rapid attenuation in humid conditions. We caution that an operational deterrent device is not yet available and further modifications and experimentation are needed. Future efforts must also evaluate cost-effectiveness of deterrents in relation to curtailment strategies to allow a cost-benefit analysis for

  14. Evaluating the effectiveness of an ultrasonic acoustic deterrent for reducing bat fatalities at wind turbines

    USGS Publications Warehouse

    Arnett, Edward B.; Hein, Cris D.; Schirmacher, Michael R.; Huso, Manuela M.P.; Szewczak, Joseph M.

    2013-01-01

    Large numbers of bats are killed by wind turbines worldwide and minimizing fatalities is critically important to bat conservation and acceptance of wind energy development. We implemented a 2-year study testing the effectiveness of an ultrasonic acoustic deterrent for reducing bat fatalities at a wind energy facility in Pennsylvania. We randomly selected control and treatment turbines that were searched daily in summer and fall 2009 and 2010. Estimates of fatality, corrected for field biases, were compared between treatment and control turbines. In 2009, we estimated 21–51% fewer bats were killed per treatment turbine than per control turbine. In 2010, we determined an approximate 9% inherent difference between treatment and control turbines and when factored into our analysis, variation increased and between 2% more and 64% fewer bats were killed per treatment turbine relative to control turbines. We estimated twice as many hoary bats were killed per control turbine than treatment turbine, and nearly twice as many silver-haired bats in 2009. In 2010, although we estimated nearly twice as many hoary bats and nearly 4 times as many silver-haired bats killed per control turbine than at treatment turbines during the treatment period, these only represented an approximate 20% increase in fatality relative to the pre-treatment period for these species when accounting for inherent differences between turbine sets. Our findings suggest broadband ultrasound broadcasts may reduce bat fatalities by discouraging bats from approaching sound sources. However, effectiveness of ultrasonic deterrents is limited by distance and area ultrasound can be broadcast, in part due to rapid attenuation in humid conditions. We caution that an operational deterrent device is not yet available and further modifications and experimentation are needed. Future efforts must also evaluate cost-effectiveness of deterrents in relation to curtailment strategies to allow a cost-benefit analysis for

  15. Industrial Wind Turbine Development and Loss of Social Justice?

    ERIC Educational Resources Information Center

    Krogh, Carmen M. E.

    2011-01-01

    This article explores the loss of social justice reported by individuals living in the environs of industrial wind turbines (IWTs). References indicate that some individuals residing in proximity to IWT facilities experience adverse health effects. These adverse health effects are severe enough that some families have abandoned their homes.…

  16. Age and Acceptance of Euthanasia.

    ERIC Educational Resources Information Center

    Ward, Russell A.

    1980-01-01

    Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

  17. Wind turbine spoiler

    DOEpatents

    Sullivan, W.N.

    An aerodynamic spoiler system for a vertical axis wind turbine includes spoilers on the blades initially stored near the rotor axis to minimize drag. A solenoid latch adjacent the central support tower releases the spoilers and centrifugal force causes the spoilers to move up the turbine blades away from the rotor axis, thereby producing a braking effect and actual slowing of the associated wind turbine, if desired. The spoiler system can also be used as an infinitely variable power control by regulated movement of the spoilers on the blades over the range between the undeployed and fully deployed positions. This is done by the use of a suitable powered reel and cable located at the rotor tower to move the spoilers.

  18. Turbine airfoil manufacturing technology

    SciTech Connect

    Kortovich, C.

    1995-10-01

    The efficiency and effectiveness of the gas turbine engine is directly related to the turbine inlet temperatures. The ability to increase these temperatures has occurred as a result of improvements in materials, design, and processing techniques. A generic sequence indicating the relationship of these factors to temperature capability is schematically shown in Figure 1 for aircraft engine and land based engine materials. A basic contribution that is not captured by the Figure is the significant improvement in process and manufacturing capability that has accompanied each of these innovations. It is this capability that has allowed the designs and innovations to be applied on a high volume, cost effective scale in the aircraft gas turbine market.

  19. Wind Turbine Technology

    SciTech Connect

    Spera, D.A.

    1994-01-01

    This book reviews advances in aerodynamics, structural dynamics and fatigue, wind characteristics, acoustic and electromagnetic emissions, commercial wind power applications, and utility power systems that use wind power plants. The book examines the choices made by inventors, designers, and builders of turbines; absorb their practical lessons; and presents the experience of a wide range of wind-energy professionals. Included are sources of technical information, side-by-side comparisons of commercial wind turbines, technical data on wind turbines of various sizes and types, and fundamental equations for engineers designing and analyzing systems. This book would be useful to practicing engineers, designers, meteorologists, researchers, utility project managers and planners, wind power plant developers, and equipment manufacturers, as well as students and teachers.

  20. Turbine Airfoil Deposition Models

    NASA Technical Reports Server (NTRS)

    Rosner, D. E.

    1984-01-01

    Gas turbine failures associated with sea-salt ingestion and sulfur-containing fuel impurities have directed attention to alkali sulfate deposition and the associated hot corrosion of gas turbine (GT) blades under some GT operating conditions. These salt deposits form thin, molten films which undermine the protective metal oxide coating normally found on GT blades. The prediction of molten salt deposition, flow and oxide dissolution, and their effects on the lifetime of turbine blades are examined. Goals include rationalizing and helping to predict corrosion patterns on operational GT rotor blades and stators, and ultimately providing some of the tools required to design laboratory simulators and future corrosion-resistant high-performance engines. Necessary background developments are reviewed first, and then recent results and tentative conclusions are presented along with a brief account of the present research plans.

  1. Upgrading jet turbine technology

    SciTech Connect

    Valenti, M.

    1995-12-01

    This article describes a joint government/industry program that is developing a new breed of turbine components, including bearings, blades, and seals, to double the propulsion capacity of both military and commercial jet engines. Although the tensions of the Cold War have receded with the demise of the Soviet Union, the US continually seeks to improve the operational readiness of its weapon systems. The challenge facing the Pentagon today is maintaining US technological superiority in the face of post-Cold War budget cuts. A model program for doing so is the joint government/industry Integrated High Performance Turbine Engine Technology program, or IHPTET (pronounced ip-tet). The goal of the IHPTET program is to develop technologies that will double the propulsion capability of military turbine engines by the turn of the century.

  2. Gas turbine sealing apparatus

    DOEpatents

    Wiebe, David J; Wessell, Brian J; Ebert, Todd; Beeck, Alexander; Liang, George; Marussich, Walter H

    2013-02-19

    A gas turbine includes forward and aft rows of rotatable blades, a row of stationary vanes between the forward and aft rows of rotatable blades, an annular intermediate disc, and a seal housing apparatus. The forward and aft rows of rotatable blades are coupled to respective first and second portions of a disc/rotor assembly. The annular intermediate disc is coupled to the disc/rotor assembly so as to be rotatable with the disc/rotor assembly during operation of the gas turbine. The annular intermediate disc includes a forward side coupled to the first portion of the disc/rotor assembly and an aft side coupled to the second portion of the disc/rotor assembly. The seal housing apparatus is coupled to the annular intermediate disc so as to be rotatable with the annular intermediate disc and the disc/rotor assembly during operation of the gas turbine.

  3. Wind Turbine Acoustics

    NASA Technical Reports Server (NTRS)

    Hubbard, Harvey H.; Shepherd, Kevin P.

    2009-01-01

    Wind turbine generators, ranging in size from a few kilowatts to several megawatts, are producing electricity both singly and in wind power stations that encompass hundreds of machines. Many installations are in uninhabited areas far from established residences, and therefore there are no apparent environmental impacts in terms of noise. There is, however, the potential for situations in which the radiated noise can be heard by residents of adjacent neighborhoods, particularly those neighborhoods with low ambient noise levels. A widely publicized incident of this nature occurred with the operation of the experimental Mod-1 2-MW wind turbine, which is described in detail elsewhere. Pioneering studies which were conducted at the Mod-1 site on the causes and remedies of noise from wind turbines form the foundation of much of the technology described in this chapter.

  4. Wind turbine system

    SciTech Connect

    Smith, O.J.

    1982-05-18

    A wind turbine system utilizes a bicycle wheel type turbine having airfoils mounted on various spoke pairs. The vertical yaw axis lies in the horizontal projection of the airfoils to offer better control of the system; for example, automatic stowage in the case of excessive wind is provided since the superstructure of the turbine provides a torque around the vertical yaw axis which moves the wheel into a stowed position. At the same time, the wheel diameter can be made larger and thus heavier since the drive connection to the generator also helps support the weight of the wheel, since it is a rim drive. Greater electrical generation is also provided since an air scoop facing into the wind allows the effective generator capacity to be increased with air velocity. Lastly, the radial rate of change of the angle of the airfoils can be closely controlled.

  5. Turbine nozzle attachment system

    DOEpatents

    Norton, Paul F.; Shaffer, James E.

    1995-01-01

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine.

  6. Wind turbine spoiler

    DOEpatents

    Sullivan, William N.

    1985-01-01

    An aerodynamic spoiler system for a vertical axis wind turbine includes spoilers on the blades initially stored near the rotor axis to minimize drag. A solenoid latch adjacent the central support tower releases the spoilers and centrifugal force causes the spoilers to move up the turbine blades away from the rotor axis, thereby producing a braking effect and actual slowing of the associated wind turbine, if desired. The spoiler system can also be used as an infinitely variable power control by regulated movement of the spoilers on the blades over the range between the undeployed and fully deployed positions. This is done by the use of a suitable powered reel and cable located at the rotor tower to move the spoilers.

  7. Turbine nozzle attachment system

    DOEpatents

    Norton, P.F.; Shaffer, J.E.

    1995-10-24

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and is attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine. 3 figs.

  8. Wind Turbine With Concentric Ducts

    NASA Technical Reports Server (NTRS)

    Muhonen, A. J.

    1983-01-01

    Wind Turbine device is relatively compact and efficient. Converging inner and outer ducts increase pressure difference across blades of wind turbine. Turbine shaft drives alternator housed inside exit cone. Suitable for installation on such existing structures as water towers, barns, houses, and commercial buildings.

  9. Steam generators, turbines, and condensers. Volume six

    SciTech Connect

    Not Available

    1986-01-01

    Volume six covers steam generators (How steam is generated, steam generation in a PWR, vertical U-tube steam generators, once-through steam generators, how much steam do steam generators make.), turbines (basic turbine principles, impulse turbines, reaction turbines, turbine stages, turbine arrangements, turbine steam flow, steam admission to turbines, turbine seals and supports, turbine oil system, generators), and condensers (need for condensers, basic condenser principles, condenser arrangements, heat transfer in condensers, air removal from condensers, circulating water system, heat loss to the circulating water system, factors affecting condenser performance, condenser auxiliaries).

  10. Wind turbine reliability : understanding and minimizing wind turbine operation and maintenance costs.

    SciTech Connect

    Not Available

    2004-11-01

    Wind turbine system reliability is a critical factor in the success of a wind energy project. Poor reliability directly affects both the project's revenue stream through increased operation and maintenance (O&M) costs and reduced availability to generate power due to turbine downtime. Indirectly, the acceptance of wind-generated power by the financial and developer communities as a viable enterprise is influenced by the risk associated with the capital equipment reliability; increased risk, or at least the perception of increased risk, is generally accompanied by increased financing fees or interest rates. Cost of energy (COE) is a key project evaluation metric, both in commercial applications and in the U.S. federal wind energy program. To reflect this commercial reality, the wind energy research community has adopted COE as a decision-making and technology evaluation metric. The COE metric accounts for the effects of reliability through levelized replacement cost and unscheduled maintenance cost parameters. However, unlike the other cost contributors, such as initial capital investment and scheduled maintenance and operating expenses, costs associated with component failures are necessarily speculative. They are based on assumptions about the reliability of components that in many cases have not been operated for a complete life cycle. Due to the logistical and practical difficulty of replacing major components in a wind turbine, unanticipated failures (especially serial failures) can have a large impact on the economics of a project. The uncertainty associated with long-term component reliability has direct bearing on the confidence level associated with COE projections. In addition, wind turbine technology is evolving. New materials and designs are being incorporated in contemporary wind turbines with the ultimate goal of reducing weight, controlling loads, and improving energy capture. While the goal of these innovations is reduction in the COE, there is a

  11. Advanced wind turbine design

    SciTech Connect

    Jamieson, P.M.; Jaffrey, A.

    1995-09-01

    Garrad Hassan have a project in progress funded by the UK Department of Trade and Industry (DTI) to assess the prospects and cost benefits of advanced wind turbine design. In the course of this work, a new concept, the coned rotor design, has been developed. This enables a wind turbine system to operate in effect with variable rotor diameter augmenting energy capture in light winds and shedding loads in storm conditions. Comparisons with conventional design suggest that a major benefit in reduced cost of wind generated electricity may be possible.

  12. Vertical axis wind turbines

    DOEpatents

    Krivcov, Vladimir; Krivospitski, Vladimir; Maksimov, Vasili; Halstead, Richard; Grahov, Jurij

    2011-03-08

    A vertical axis wind turbine is described. The wind turbine can include a top ring, a middle ring and a lower ring, wherein a plurality of vertical airfoils are disposed between the rings. For example, three vertical airfoils can be attached between the upper ring and the middle ring. In addition, three more vertical airfoils can be attached between the lower ring and the middle ring. When wind contacts the vertically arranged airfoils the rings begin to spin. By connecting the rings to a center pole which spins an alternator, electricity can be generated from wind.

  13. Multiple piece turbine airfoil

    DOEpatents

    Kimmel, Keith D; Wilson, Jr., Jack W.

    2010-11-02

    A turbine airfoil, such as a rotor blade or a stator vane, for a gas turbine engine, the airfoil formed as a shell and spar construction with a plurality of dog bone struts each mounted within openings formed within the shell and spar to allow for relative motion between the spar and shell in the airfoil chordwise direction while also forming a seal between adjacent cooling channels. The struts provide the seal as well as prevent bulging of the shell from the spar due to the cooling air pressure.

  14. Refurbishing steam turbines

    SciTech Connect

    Valenti, M.

    1997-12-01

    Power-plant operators are reducing maintenance costs of their aging steam turbines by using wire-arc spray coating and shot peening to prolong the service life of components, and by replacing outmoded bearings and seals with newer designs. Steam-turbine operators are pressed with the challenge of keeping their aging machines functioning in the face of wear problems that are exacerbated by the demand for higher efficiencies. These problems include intense thermal cycling during both start-up and shutdown, water particles in steam and solid particles in the air that pit smooth surfaces, and load changes that cause metal fatigue.

  15. Ceramic gas turbine shroud

    DOEpatents

    Shi, Jun; Green, Kevin E.

    2014-07-22

    An example gas turbine engine shroud includes a first annular ceramic wall having an inner side for resisting high temperature turbine engine gasses and an outer side with a plurality of radial slots. A second annular metallic wall is positioned radially outwardly of and enclosing the first annular ceramic wall and has a plurality of tabs in communication with the slot of the first annular ceramic wall. The tabs of the second annular metallic wall and slots of the first annular ceramic wall are in communication such that the first annular ceramic wall and second annular metallic wall are affixed.

  16. Velocity pump reaction turbine

    DOEpatents

    House, P.A.

    An expanding hydraulic/two-phase velocity pump reaction turbine including a dual concentric rotor configuration with an inter-rotor annular flow channel in which the inner rotor is mechanically driven by the outer rotor. In another embodiment, the inner rotor is immobilized and provided with gas recovery ports on its outer surface by means of which gas in solution may be recovered. This velocity pump reaction turbine configuration is capable of potential energy conversion efficiencies of up to 70%, and is particularly suited for geothermal applications.

  17. Velocity pump reaction turbine

    DOEpatents

    House, Palmer A.

    1984-01-01

    An expanding hydraulic/two-phase velocity pump reaction turbine including a dual concentric rotor configuration with an inter-rotor annular flow channel in which the inner rotor is mechanically driven by the outer rotor. In another embodiment, the inner rotor is immobilized and provided with gas recovery ports on its outer surface by means of which gas in solution may be recovered. This velocity pump reaction turbine configuration is capable of potential energy conversion efficiencies of up to 70%, and is particularly suited for geothermal applications.

  18. Velocity pump reaction turbine

    DOEpatents

    House, Palmer A.

    1982-01-01

    An expanding hydraulic/two-phase velocity pump reaction turbine including a dual concentric rotor configuration with an inter-rotor annular flow channel in which the inner rotor is mechanically driven by the outer rotor. In another embodiment, the inner rotor is immobilized and provided with gas recovery ports on its outer surface by means of which gas in solution may be recovered. This velocity pump reaction turbine configuration is capable of potential energy conversion efficiencies of up to 70%, and is particularly suited for geothermal applications.

  19. Advanced turbine study. [airfoil coling in rocket turbines

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Experiments to determine the available increase in turbine horsepower achieved by increasing turbine inlet temperature over a range of 1800 to 2600 R, while applying current gas turbine airfoil cling technology are discussed. Four cases of rocket turbine operating conditions were investigated. Two of the cases used O2/H2 propellant, one with a fuel flowrate of 160 pps, the other 80 pps. Two cases used O2/CH4 propellant, each having different fuel flowrates, pressure ratios, and inlet pressures. Film cooling was found to be the required scheme for these rocket turbine applications because of the high heat flux environments. Conventional convective or impingement cooling, used in jet engines, is inadequate in a rocket turbine environment because of the resulting high temperature gradients in the airfoil wall, causing high strains and low cyclic life. The hydrogen-rich turbine environment experienced a loss, or no gain, in delivered horsepower as turbine inlet temperature was increased at constant airfoil life. The effects of film cooling with regard to reduced flow available for turbine work, dilution of mainstream gas temperature and cooling reentry losses, offset the relatively low specific work capability of hydrogen when increasing turbine inlet temperature over the 1800 to 2600 R range. However, the methane-rich environment experienced an increase in delivered horsepower as turbine inlet temperature was increased at constant airfoil life. The results of a materials survey and heat transfer and durability analysis are discussed.

  20. 2013 SYR Accepted Poster Abstracts.

    PubMed

    2013-01-01

    SYR 2013 Accepted Poster abstracts: 1. Benefits of Yoga as a Wellness Practice in a Veterans Affairs (VA) Health Care Setting: If You Build It, Will They Come? 2. Yoga-based Psychotherapy Group With Urban Youth Exposed to Trauma. 3. Embodied Health: The Effects of a Mind�Body Course for Medical Students. 4. Interoceptive Awareness and Vegetable Intake After a Yoga and Stress Management Intervention. 5. Yoga Reduces Performance Anxiety in Adolescent Musicians. 6. Designing and Implementing a Therapeutic Yoga Program for Older Women With Knee Osteoarthritis. 7. Yoga and Life Skills Eating Disorder Prevention Among 5th Grade Females: A Controlled Trial. 8. A Randomized, Controlled Trial Comparing the Impact of Yoga and Physical Education on the Emotional and Behavioral Functioning of Middle School Children. 9. Feasibility of a Multisite, Community based Randomized Study of Yoga and Wellness Education for Women With Breast Cancer Undergoing Chemotherapy. 10. A Delphi Study for the Development of Protocol Guidelines for Yoga Interventions in Mental Health. 11. Impact Investigation of Breathwalk Daily Practice: Canada�India Collaborative Study. 12. Yoga Improves Distress, Fatigue, and Insomnia in Older Veteran Cancer Survivors: Results of a Pilot Study. 13. Assessment of Kundalini Mantra and Meditation as an Adjunctive Treatment With Mental Health Consumers. 14. Kundalini Yoga Therapy Versus Cognitive Behavior Therapy for Generalized Anxiety Disorder and Co-Occurring Mood Disorder. 15. Baseline Differences in Women Versus Men Initiating Yoga Programs to Aid Smoking Cessation: Quitting in Balance Versus QuitStrong. 16. Pranayam Practice: Impact on Focus and Everyday Life of Work and Relationships. 17. Participation in a Tailored Yoga Program is Associated With Improved Physical Health in Persons With Arthritis. 18. Effects of Yoga on Blood Pressure: Systematic Review and Meta-analysis. 19. A Quasi-experimental Trial of a Yoga based Intervention to Reduce Stress and

  1. Turbine meters for liquid measurement

    SciTech Connect

    Wass, D.J.; Allen, C.R.

    1995-12-01

    Liquid turbine meters operate in response to fundamental engineering principles, Operation with a single moving part produces excellent longevity and reliability. Liquid turbine meters display wide rangeability, high accuracy, excellent repeatability, low pressure drop and moderate cost. Liquid turbine meters may be applied to many different fluids with different physical properties and corrosive tendencies. The marriage of liquid turbine meters to electronic instruments allows instantaneous flow calculations and produces the flexibility to display data, store data, transmit data in the most convenient form. Liquid turbine meters should be the first flow measurement instrument considered for liquid measurement applications.

  2. Computational Fluid Dynamics based Fault Simulations of a Vertical Axis Wind Turbines

    NASA Astrophysics Data System (ADS)

    Park, Kyoo-seon; Asim, Taimoor; Mishra, Rakesh

    2012-05-01

    Due to depleting fossil fuels and a rapid increase in the fuel prices globally, the search for alternative energy sources is becoming more and more significant. One of such energy source is the wind energy which can be harnessed with the use of wind turbines. The fundamental principle of wind turbines is to convert the wind energy into first mechanical and then into electrical form. The relatively simple operation of such turbines has stirred the researchers to come up with innovative designs for global acceptance and to make these turbines commercially viable. Furthermore, the maintenance of wind turbines has long been a topic of interest. Condition based monitoring of wind turbines is essential to maintain continuous operation of wind turbines. The present work focuses on the difference in the outputs of a vertical axis wind turbine (VAWT) under different operational conditions. A Computational Fluid Dynamics (CFD) technique has been used for various blade configurations of a VAWT. The results indicate that there is significant degradation in the performance output of wind turbines as the number of blades broken or missing from the VAWT increases. The study predicts the faults in the blades of VAWTs by monitoring its output.

  3. Baby-Crying Acceptance

    NASA Astrophysics Data System (ADS)

    Martins, Tiago; de Magalhães, Sérgio Tenreiro

    The baby's crying is his most important mean of communication. The crying monitoring performed by devices that have been developed doesn't ensure the complete safety of the child. It is necessary to join, to these technological resources, means of communicating the results to the responsible, which would involve the digital processing of information available from crying. The survey carried out, enabled to understand the level of adoption, in the continental territory of Portugal, of a technology that will be able to do such a digital processing. It was used the TAM as the theoretical referential. The statistical analysis showed that there is a good probability of acceptance of such a system.

  4. High acceptance recoil polarimeter

    SciTech Connect

    The HARP Collaboration

    1992-12-05

    In order to detect neutrons and protons in the 50 to 600 MeV energy range and measure their polarization, an efficient, low-noise, self-calibrating device is being designed. This detector, known as the High Acceptance Recoil Polarimeter (HARP), is based on the recoil principle of proton detection from np[r arrow]n[prime]p[prime] or pp[r arrow]p[prime]p[prime] scattering (detected particles are underlined) which intrinsically yields polarization information on the incoming particle. HARP will be commissioned to carry out experiments in 1994.

  5. The use of optical pyrometers in axial flow turbines

    NASA Astrophysics Data System (ADS)

    Sellers, R. R.; Przirembel, H. R.; Clevenger, D. H.; Lang, J. L.

    1989-07-01

    An optical pyrometer system that can be used to measure metal temperatures over an extended range of temperature has been developed. Real-time flame discrimination permits accurate operation in the gas turbine environment with high flame content. This versatile capability has been used in a number of ways. In experimental engines, a fixed angle pyrometer has been used for turbine health monitoring for the automatic test stand abort system. Turbine blade creep capability has been improved by tailoring the burner profile based on measured blade temperatures. Fixed and traversing pyrometers were used extensively during engine development to map blade surface temperatures in order to assess cooling effectiveness and identify optimum configurations. Portable units have been used in turbine field inspections. A new low temperature pyrometer is being used as a diagnostic tool in the alternate turbopump design for the Space Shuttle main engine. Advanced engine designs will incorporate pyrometers in the engine control system to limit operation to safe temperatures.

  6. Small hydraulic turbine drives

    NASA Technical Reports Server (NTRS)

    Rostafinski, W. A.

    1970-01-01

    Turbine, driven by the fluid being pumped, requires no external controls, is completely integrated into the flow system, and has bearings which utilize the main fluid for lubrication and cooling. Torque capabilities compare favorably with those developed by positive displacement hydraulic motors.

  7. Liquid rocket engine turbines

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Criteria for the design and development of turbines for rocket engines to meet specific performance, and installation requirements are summarized. The total design problem, and design elements are identified, and the current technology pertaining to these elements is described. Recommended practices for achieving a successful design are included.

  8. Turbine blade damping study

    NASA Technical Reports Server (NTRS)

    Dominic, R. J.

    1984-01-01

    Research results and progress on the performance of bladed systems is reported the different topics discussed include: the study of turbine blade damping; forced vibrations of friction damped beam moistures in two dimensions; and a users manual for a computer program for dynamic analysis of bladed systems.

  9. Advanced Gas Turbine (AGT)

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The development and progress of the Advanced Gas Turbine engine program is examined. An analysis of the role of ceramics in the design and major engine components is included. Projected fuel economy, emissions and performance standards, and versatility in fuel use are also discussed.

  10. Turbine imaging technology assessment

    SciTech Connect

    Moursund, R. A.; Carlson, T. J.

    2004-12-01

    The goal of this project was to identify and evaluate imaging technologies for observing juvenile fish within a Kaplan turbine, and specifically that would enable scientists to determine mechanisms of fish injury within an operating turbine unit. This report documents the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. These observations were used to make modifications to dam structures and operations to improve conditions for fish passage while maintaining or improving hydropower production. The physical and hydraulic environment that fish experience as they pass through the hydroelectric plants were studied and the regions with the greatest potential for injury were defined. Biological response data were also studied to determine the probable types of injuries sustained in the turbine intake and what types of injuries are detectable with imaging technologies. The study grouped injury-causing mechanisms into two categories: fluid (pressure/cavitation, shear, turbulence) and mechanical (strike/collision, grinding/pinching, scraping). The physical constraints of the environment, together with the likely types of injuries to fish, provided the parameters needed for a rigorous imaging technology evaluation. Types of technology evaluated included both tracking and imaging systems using acoustic technologies (such as sonar and acoustic tags) and optic technologies (such as pulsed-laser videography, which is high-speed videography using a laser as the flash). Criteria for determining image data quality such as frame rate, target detectability, and resolution were used to quantify the minimum requirements of an imaging sensor.

  11. Blade for turbine engine

    NASA Technical Reports Server (NTRS)

    Suciu, Gabriel L. (Inventor); Babu, Michael (Inventor); Murdock, James R. (Inventor)

    2004-01-01

    A blade for a turbine engine having a centerline. The blade comprises: a root section extending at an angle relative to the centerline; and an airfoil section extending from the root section. The root section is directly adjacent said airfoil section. In other words, the blade is neckless. The blade is part of a rotor assembly, and is preferably a fan blade.

  12. Crescentic ramp turbine stage

    NASA Technical Reports Server (NTRS)

    Lee, Ching-Pang (Inventor); Tam, Anna (Inventor); Kirtley, Kevin Richard (Inventor); Lamson, Scott Henry (Inventor)

    2007-01-01

    A turbine stage includes a row of airfoils joined to corresponding platforms to define flow passages therebetween. Each airfoil includes opposite pressure and suction sides and extends in chord between opposite leading and trailing edges. Each platform includes a crescentic ramp increasing in height from the leading and trailing edges toward the midchord of the airfoil along the pressure side thereof.

  13. Turbine vane structure

    DOEpatents

    Irwin, John A.

    1980-08-19

    A liquid cooled stator blade assembly for a gas turbine engine includes an outer shroud having a pair of liquid inlets and a pair of liquid outlets supplied through a header and wherein means including tubes support the header radially outwardly of the shroud and also couple the header with the pair of liquid inlets and outlets. A pair of turbine vanes extend radially between the shroud and a vane platform to define a gas turbine motive fluid passage therebetween; and each of the vanes is cooled by an internal body casting of super alloy material with a grooved layer of highly heat conductive material that includes spaced apart flat surface trailing edges in alignment with a flat trailing edge of the casting joined to wall segments of the liner which are juxtaposed with respect to the internal casting to form an array of parallel liquid inlet passages on one side of the vane and a second plurality of parallel liquid return passages on the opposite side of the vane; and a superalloy heat and wear resistant imperforate skin covers the outer surface of the composite blade including the internal casting and the heat conductive layer; a separate trailing edge section includes an internal casting and an outer skin butt connected to the end surfaces of the internal casting and the heat conductive layer to form an easily assembled liquid cooled trailing edge section in the turbine vane.

  14. Numerical evaluation of single central jet for turbine disk cooling

    NASA Astrophysics Data System (ADS)

    Subbaraman, M. R.; Hadid, A. H.; McConnaughey, P. K.

    The cooling arrangement of the Space Shuttle Main Engine High Pressure Oxidizer Turbopump (HPOTP) incorporates two jet rings, each of which produces 19 high-velocity coolant jets. At some operating conditions, the frequency of excitation associated with the 19 jets coincides with the natural frequency of the turbine blades, contributing to fatigue cracking of blade shanks. In this paper, an alternate turbine disk cooling arrangement, applicable to disk faces of zero hub radius, is evaluated, which consists of a single coolant jet impinging at the center of the turbine disk. Results of the CFD analysis show that replacing the jet ring with a single central coolant jet in the HPOTP leads to an acceptable thermal environment at the disk rim. Based on the predictions of flow and temperature fields for operating conditions, the single central jet cooling system was recommended for implementation into the development program of the Technology Test Bed Engine at NASA Marshall Space Flight Center.

  15. T55 power turbine rotor multiplane-multispeed balancing study

    NASA Technical Reports Server (NTRS)

    Martin, M. R.

    1982-01-01

    A rotordynamic analysis of the T55-L-11C engine was used to evaluate the balancing needs of the power turbine and to optimize the balancing procedure. As a result, recommendations were made for implementation of a multiplane-multispeed balancing plan. Precision collars for the attachment of trial weights to a slender rotor were designed enabling demonstration balancing on production hardware. The quality of the balance was then evaluated by installing a high speed balanced power turbine in an engine and running in a test cell at the Corpus Christi Army depot. The engine used had been tested prior to the turbine changeout and showed acceptable overall vibration levels for the engine were significantly reduced, demonstrating the ability of multiplane-multispeed balancing to control engine vibration.

  16. Water table tests of proposed heat transfer tunnels for small turbine vanes

    NASA Technical Reports Server (NTRS)

    Meitner, P. L.

    1974-01-01

    Water-table flow tests were conducted for proposed heat-transfer tunnels which were designed to provide uniform flow into their respective test sections of a single core engine turbine vane and a full annular ring of helicopter turbine vanes. Water-table tests were also performed for the single-vane test section of the core engine tunnel. The flow in the heat-transfer tunnels was shown to be acceptable.

  17. Wind Turbine Infra and Low-Frequency Sound: Warning Signs that Were Not Heard

    ERIC Educational Resources Information Center

    James, Richard R.

    2012-01-01

    Industrial wind turbines are frequently thought of as benign. However, the literature is reporting adverse health effects associated with the implementation of industrial-scale wind developments. This article explores the historical evidence about what was known regarding infra and low-frequency sound from wind turbines and other noise sources…

  18. Wind Turbine Acoustic Investigation: Infrasound and Low-Frequency Noise--A Case Study

    ERIC Educational Resources Information Center

    Ambrose, Stephen E.; Rand, Robert W.; Krogh, Carmen M. E.

    2012-01-01

    Wind turbines produce sound that is capable of disturbing local residents and is reported to cause annoyance, sleep disturbance, and other health-related impacts. An acoustical study was conducted to investigate the presence of infrasonic and low-frequency noise emissions from wind turbines located in Falmouth, Massachusetts, USA. During the…

  19. Turbine blade tip gap reduction system

    DOEpatents

    Diakunchak, Ihor S.

    2012-09-11

    A turbine blade sealing system for reducing a gap between a tip of a turbine blade and a stationary shroud of a turbine engine. The sealing system includes a plurality of flexible seal strips extending from a pressure side of a turbine blade generally orthogonal to the turbine blade. During operation of the turbine engine, the flexible seal strips flex radially outward extending towards the stationary shroud of the turbine engine, thereby reducing the leakage of air past the turbine blades and increasing the efficiency of the turbine engine.

  20. Control and stabilization of the DOE/NASA Mod-1 two megawatt wind turbine generator

    NASA Technical Reports Server (NTRS)

    Barton, R. S.; Bowler, C. E. J.; Piwko, R. J.

    1979-01-01

    This paper describes the controls design, performance simulation process and specialized dynamic considerations for the DOE/NASA Mod 1 wind turbine generator (WTG). It shows controls, structural and utility interface considerations of the wind turbine generator and shows how a wind turbine generator can be integrated with a synchronous power system. Differences with respect to fossil or hydro generation and their implications are vital to long-term WTG reliability and availability and acceptance by utilities and consumers. The paper describes the control performance requirements to provide stable pitch and excitation control with drivetrain torsional dynamics, and the control of power swing stability and utility feeder voltage due to wind gusts.

  1. 42 CFR 411.379 - When CMS accepts a request.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 2 2013-10-01 2013-10-01 false When CMS accepts a request. 411.379 Section 411.379 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE... receiving a request for an advisory opinion, CMS promptly makes an initial determination of whether...

  2. 42 CFR 411.379 - When CMS accepts a request.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 2 2014-10-01 2014-10-01 false When CMS accepts a request. 411.379 Section 411.379 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE... receiving a request for an advisory opinion, CMS promptly makes an initial determination of whether...

  3. 42 CFR 411.379 - When CMS accepts a request.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false When CMS accepts a request. 411.379 Section 411.379 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE... receiving a request for an advisory opinion, CMS promptly makes an initial determination of whether...

  4. 42 CFR 411.379 - When CMS accepts a request.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 2 2011-10-01 2011-10-01 false When CMS accepts a request. 411.379 Section 411.379 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE... receiving a request for an advisory opinion, CMS promptly makes an initial determination of whether...

  5. 42 CFR 411.379 - When CMS accepts a request.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 2 2012-10-01 2012-10-01 false When CMS accepts a request. 411.379 Section 411.379 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE... receiving a request for an advisory opinion, CMS promptly makes an initial determination of whether...

  6. SMART POWER TURBINE

    SciTech Connect

    Nirm V. Nirmalan

    2003-11-01

    Gas turbines are the choice technology for high-performance power generation and are employed in both simple and combined cycle configurations around the world. The Smart Power Turbine (SPT) program has developed new technologies that are needed to further extend the performance and economic attractiveness of gas turbines for power generation. Today's power generation gas turbines control firing temperatures indirectly, by measuring the exhaust gas temperature and then mathematically calculating the peak combustor temperatures. But temperatures in the turbine hot gas path vary a great deal, making it difficult to control firing temperatures precisely enough to achieve optimal performance. Similarly, there is no current way to assess deterioration of turbine hot-gas-path components without shutting down the turbine. Consequently, maintenance and component replacements are often scheduled according to conservative design practices based on historical fleet-averaged data. Since fuel heating values vary with the prevalent natural gas fuel, the inability to measure heating value directly, with sufficient accuracy and timeliness, can lead to maintenance and operational decisions that are less than optimal. GE Global Research Center, under this Smart Power Turbine program, has developed a suite of novel sensors that would measure combustor flame temperature, online fuel lower heating value (LHV), and hot-gas-path component life directly. The feasibility of using the ratio of the integrated intensities of portions of the OH emission band to determine the specific average temperature of a premixed methane or natural-gas-fueled combustion flame was demonstrated. The temperature determined is the temperature of the plasma included in the field of view of the sensor. Two sensor types were investigated: the first used a low-resolution fiber optic spectrometer; the second was a SiC dual photodiode chip. Both methods worked. Sensitivity to flame temperature changes was remarkably

  7. 75 FR 143 - Lockhart Power Company; Notice of Application Accepted for Filing, Soliciting Motions To...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-04

    ... applicant proposes to install a single submersible turbine/generator unit in the hydro canal bank and... COMMISSION Lockhart Power Company; Notice of Application Accepted for Filing, Soliciting Motions To Intervene... Power Company. e. Name of Project: Lockhart Project. f. Location: The project is located on the...

  8. Differences in HIV vaccine acceptability between genders.

    PubMed

    Kakinami, Lisa; Newman, Peter A; Lee, Sung-Jae; Duan, Naihua

    2008-05-01

    The development of safe and efficacious preventive HIV vaccines offers the best long-term hope of controlling the AIDS pandemic. Nevertheless, suboptimal uptake of safe and efficacious vaccines that already exist suggest that HIV vaccine acceptability cannot be assumed, particularly among communities most vulnerable to HIV. The present study aimed to identify barriers and motivators to future HIV vaccine acceptability among low socioeconomic, ethnically diverse men and women in Los Angeles County. Participants completed a cross-sectional survey assessing their attitudes and beliefs regarding future HIV vaccines. Hypothetical HIV vaccine scenarios were administered to determine HIV vaccine acceptability. Two-sided t-tests were performed, stratified by gender, to examine the association between vaccine acceptability and potential barriers and motivators. Barriers to HIV vaccine acceptability differed between men and women. For women, barriers to HIV vaccine acceptability were related to their intimate relationships (p<0.05), negative experiences with health care providers (p<0.05) and anticipated difficulties procuring insurance (p<0.01). Men were concerned that the vaccine would weaken the immune system (p<0.005) or would affect their HIV test results (p<0.05). Motivators for women included the ability to conceive a child without worrying about contracting HIV (p<0.10) and support from their spouse/significant other for being vaccinated (p<0.10). Motivators for men included feeling safer with sex partners (p<0.05) and social influence from friends to get vaccinated (p<0.005). Family support for HIV immunization was a motivator for both men and women (p<0.10). Gender-specific interventions may increase vaccine acceptability among men and women at elevated risk for HIV infection. Among women, interventions need to focus on addressing barriers due to gendered power dynamics in relationships and discrimination in health care. Among men, education that addresses fears

  9. New technology in turbine aerodynamics

    NASA Technical Reports Server (NTRS)

    Glassman, A. J.; Moffitt, T. P.

    1972-01-01

    A cursory review is presented of some of the recent work that has been done in turbine aerodynamic research at NASA-Lewis Research Center. Topics discussed include the aerodynamic effect of turbine coolant, high work-factor (ratio of stage work to square of blade speed) turbines, and computer methods for turbine design and performance prediction. An extensive bibliography is included. Experimental cooled-turbine aerodynamics programs using two-dimensional cascades, full annular cascades, and cold rotating turbine stage tests are discussed with some typical results presented. Analytically predicted results for cooled blade performance are compared to experimental results. The problems and some of the current programs associated with the use of very high work factors for fan-drive turbines of high-bypass-ratio engines are discussed. Turbines currently being investigated make use of advanced blading concepts designed to maintain high efficiency under conditions of high aerodynamic loading. Computer programs have been developed for turbine design-point performance, off-design performance, supersonic blade profile design, and the calculation of channel velocities for subsonic and transonic flow fields. The use of these programs for the design and analysis of axial and radial turbines is discussed.

  10. Turbine repair process, repaired coating, and repaired turbine component

    DOEpatents

    Das, Rupak; Delvaux, John McConnell; Garcia-Crespo, Andres Jose

    2015-11-03

    A turbine repair process, a repaired coating, and a repaired turbine component are disclosed. The turbine repair process includes providing a turbine component having a higher-pressure region and a lower-pressure region, introducing particles into the higher-pressure region, and at least partially repairing an opening between the higher-pressure region and the lower-pressure region with at least one of the particles to form a repaired turbine component. The repaired coating includes a silicon material, a ceramic matrix composite material, and a repaired region having the silicon material deposited on and surrounded by the ceramic matrix composite material. The repaired turbine component a ceramic matrix composite layer and a repaired region having silicon material deposited on and surrounded by the ceramic matrix composite material.

  11. The Open Source DataTurbine Initiative: Streaming Data Middleware for Environmental Observing Systems

    NASA Technical Reports Server (NTRS)

    Fountain T.; Tilak, S.; Shin, P.; Hubbard, P.; Freudinger, L.

    2009-01-01

    The Open Source DataTurbine Initiative is an international community of scientists and engineers sharing a common interest in real-time streaming data middleware and applications. The technology base of the OSDT Initiative is the DataTurbine open source middleware. Key applications of DataTurbine include coral reef monitoring, lake monitoring and limnology, biodiversity and animal tracking, structural health monitoring and earthquake engineering, airborne environmental monitoring, and environmental sustainability. DataTurbine software emerged as a commercial product in the 1990 s from collaborations between NASA and private industry. In October 2007, a grant from the USA National Science Foundation (NSF) Office of Cyberinfrastructure allowed us to transition DataTurbine from a proprietary software product into an open source software initiative. This paper describes the DataTurbine software and highlights key applications in environmental monitoring.

  12. Technology Acceptance of Electronic Medical Records by Nurses

    ERIC Educational Resources Information Center

    Stocker, Gary

    2010-01-01

    The purpose of this study was to evaluate the Technology Acceptance Model's (TAM) relevance of the intention of nurses to use electronic medical records in acute health care settings. The basic technology acceptance research of Davis (1989) was applied to the specific technology tool of electronic medical records (EMR) in a specific setting…

  13. Analytical modeling of turbine wakes in yawed conditions

    NASA Astrophysics Data System (ADS)

    Bastankhah, Majid; Porté-Agel, Fernando

    2016-04-01

    Increasing wind energy production has become a unanimous plan for virtually all the developed countries. In addition to constructing new wind farms, this goal can be achieved by making wind farms more efficient. Control strategies in wind farms, such as manipulating the yaw angle of the turbines, have the potential to make wind farms more efficient. Costly numerical simulations or measurements cannot be, however, employed to assess the viability of this strategy in the numerous different scenarios happening in real wind farms. In this study, we aim to develop an inexpensive and simple analytical model that is able for the first time to predict the whole wake of a yawed turbine with an acceptable accuracy. The proposed analytical model is built upon the simplified version of the Reynolds-averaged Navier-Stokes equations. Apart from the ability of the model to predict wake flows in yawed conditions, it can provide a better understanding of turbine wakes in this complex situation. For example, it can give valuable insights on how the wake deflection varies by changing turbine and incoming flow characteristics, such as the thrust coefficient of the turbine or the ambient turbulence.

  14. Development of large, horizontal-axis wind turbines

    NASA Technical Reports Server (NTRS)

    Baldwin, D. H.; Kennard, J.

    1985-01-01

    A program to develop large, horizontal-axis wind turbines is discussed. The program is directed toward developing the technology for safe, reliable, environmentally acceptable large wind turbines that can generate a significant amount of electricity at costs competitive with those of conventional electricity-generating systems. In addition, these large wind turbines must be fully compatible with electric utility operations and interface requirements. Several ongoing projects in large-wind-turbine development are directed toward meeting the technology requirements for utility applications. The machines based on first-generation technology (Mod-OA and Mod-1) successfully completed their planned periods of experimental operation in June, 1982. The second-generation machines (Mod-2) are in operation at selected utility sites. A third-generation machine (Mod-5) is under contract. Erection and initial operation of the Mod-5 in Hawaii should take place in 1986. Each successive generation of technology increased reliability and energy capture while reducing the cost of electricity. These advances are being made by gaining a better understanding of the system-design drivers, improving the analytical design tools, verifying design methods with operating field data, and incorporating new technology and innovative designs. Information is given on the results from the first- and second-generation machines (Mod-OA, - 1, and -2), the status of the Department of Interior, and the status of the third-generation wind turbine (Mod-5).

  15. 42 CFR 426.503 - Submitting new evidence once an acceptable complaint has been filed.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Submitting new evidence once an acceptable complaint has been filed. 426.503 Section 426.503 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... acceptable complaint has been filed. Once an acceptable complaint has been filed, the aggrieved party...

  16. Curved centerline air intake for a gas turbine engine

    NASA Technical Reports Server (NTRS)

    Ruehr, W. C.; Younghans, J. L.; Smith, E. B. (Inventor)

    1980-01-01

    An inlet for a gas turbine engine was disposed about a curved centerline for the purpose of accepting intake air that is flowing at an angle to engine centerline and progressively turning that intake airflow along a curved path into alignment with the engine. This curved inlet is intended for use in under the wing locations and similar regions where airflow direction is altered by aerodynamic characteristics of the airplane. By curving the inlet, aerodynamic loss and acoustic generation and emission are decreased.

  17. Tuning of PID controllers for boiler-turbine units.

    PubMed

    Tan, Wen; Liu, Jizhen; Fang, Fang; Chen, Yanqiao

    2004-10-01

    A simple two-by-two model for a boiler-turbine unit is demonstrated in this paper. The model can capture the essential dynamics of a unit. The design of a coordinated controller is discussed based on this model. A PID control structure is derived, and a tuning procedure is proposed. The examples show that the method is easy to apply and can achieve acceptable performance. PMID:15535395

  18. Acceptance of Conditional Suicide and Euthanasia among Adult Americans.

    ERIC Educational Resources Information Center

    Johnson, David; And Others

    1980-01-01

    Analysis indicates that religious intensity, sex, age, and education are important associational variables regarding attitudes toward suicide and euthanasia. Males are more accepting than females. Females are influenced by family life conditions. Males are influenced by health status. (JMF)

  19. Advanced Hydrogen Turbine Development

    SciTech Connect

    Marra, John

    2015-09-30

    Under the sponsorship of the U.S. Department of Energy (DOE) National Energy Technology Laboratories, Siemens has completed the Advanced Hydrogen Turbine Development Program to develop an advanced gas turbine for incorporation into future coal-based Integrated Gasification Combined Cycle (IGCC) plants. All the scheduled DOE Milestones were completed and significant technical progress was made in the development of new technologies and concepts. Advanced computer simulations and modeling, as well as subscale, full scale laboratory, rig and engine testing were utilized to evaluate and select concepts for further development. Program Requirements of: A 3 to 5 percentage point improvement in overall plant combined cycle efficiency when compared to the reference baseline plant; 20 to 30 percent reduction in overall plant capital cost when compared to the reference baseline plant; and NOx emissions of 2 PPM out of the stack. were all met. The program was completed on schedule and within the allotted budget

  20. Turbine Chemistry Modeling

    NASA Technical Reports Server (NTRS)

    Liu, Nan-Suey; Wey, Thomas

    2001-01-01

    Many of the engine exhaust species resulting in significant environmental impact exist in trace amounts. Recent research, e.g., conducted at MIT-AM, has pointed to the intra-engine environment as a possible site for important trace chemistry activity. In addition, the key processes affecting the trace species activity occurring downstream in the air passages of the turbine and exhaust nozzle are not well understood. Most recently, an effort has been initiated at NASA Glenn Research Center under the UEET Program to evaluate and further develop CFD-based technology for modeling and simulation of intra-engine trace chemical changes relevant to atmospheric effects of pollutant emissions from aircraft engines. This presentation will describe the current effort conducted at Glenn; some preliminary results relevant to the trace species chemistry in a turbine passage will also be presented to indicate the progress to date.

  1. Advanced Hydrogen Turbine Development

    SciTech Connect

    Joesph Fadok

    2008-01-01

    Siemens has developed a roadmap to achieve the DOE goals for efficiency, cost reduction, and emissions through innovative approaches and novel technologies which build upon worldwide IGCC operational experience, platform technology, and extensive experience in G-class operating conditions. In Phase 1, the technologies and concepts necessary to achieve the program goals were identified for the gas turbine components and supporting technology areas and testing plans were developed to mitigate identified risks. Multiple studies were conducted to evaluate the impact in plant performance of different gas turbine and plant technologies. 2015 gas turbine technologies showed a significant improvement in IGCC plant efficiency, however, a severe performance penalty was calculated for high carbon capture cases. Thermodynamic calculations showed that the DOE 2010 and 2015 efficiency targets can be met with a two step approach. A risk management process was instituted in Phase 1 to identify risk and develop mitigation plans. For the risks identified, testing and development programs are in place and the risks will be revisited periodically to determine if changes to the plan are necessary. A compressor performance prediction has shown that the design of the compressor for the engine can be achieved with additional stages added to the rear of the compressor. Tip clearance effects were studied as well as a range of flow and pressure ratios to evaluate the impacts to both performance and stability. Considerable data was obtained on the four candidate combustion systems: diffusion, catalytic, premix, and distributed combustion. Based on the results of Phase 1, the premixed combustion system and the distributed combustion system were chosen as having the most potential and will be the focus of Phase 2 of the program. Significant progress was also made in obtaining combustion kinetics data for high hydrogen fuels. The Phase 1 turbine studies indicate initial feasibility of the

  2. Airborne Wind Turbine

    SciTech Connect

    2010-09-01

    Broad Funding Opportunity Announcement Project: Makani Power is developing an Airborne Wind Turbine (AWT) that eliminates 90% of the mass of a conventional wind turbine and accesses a stronger, more consistent wind at altitudes of near 1,000 feet. At these altitudes, 85% of the country can offer viable wind resources compared to only 15% accessible with current technology. Additionally, the Makani Power wing can be economically deployed in deep offshore waters, opening up a resource which is 4 times greater than the entire U.S. electrical generation capacity. Makani Power has demonstrated the core technology, including autonomous launch, land, and power generation with an 8 meter wingspan, 20 kW prototype. At commercial scale, Makani Power aims to develop a 600 kW, 28 meter wingspan product capable of delivering energy at an unsubsidized cost competitive with coal, the current benchmark for low-cost power.

  3. Advanced turbine study

    NASA Technical Reports Server (NTRS)

    Castro, J. H.

    1985-01-01

    The feasibility of an advanced convective cooling concept applied to rocket turbine airfoils which operate in a high pressure hydrogen and methane environment was investigated. The concept consists of a central structural member in which grooves are machined. The grooves are temporarily filled with a removable filler and the entire airfoil is covered with a layer of electroformed nickel, or nickel base alloy. After removal of the filler, the low thermal resistance of the nickel closure causes the wall temperature to be reduced by heat transfer to the coolant. The program is divided in the following tasks: (1) turbine performance appraisal; (2) coolant geometry evaluation; (3) test hardware design and analysis; and (4) test airfoil fabrication.

  4. Turbine seal assembly

    DOEpatents

    Little, David A.

    2013-04-16

    A seal assembly that limits gas leakage from a hot gas path to one or more disc cavities in a turbine engine. The seal assembly includes a seal apparatus that limits gas leakage from the hot gas path to a respective one of the disc cavities. The seal apparatus comprises a plurality of blade members rotatable with a blade structure. The blade members are associated with the blade structure and extend toward adjacent stationary components. Each blade member includes a leading edge and a trailing edge, the leading edge of each blade member being located circumferentially in front of the blade member's corresponding trailing edge in a direction of rotation of the turbine rotor. The blade members are arranged such that a space having a component in a circumferential direction is defined between adjacent circumferentially spaced blade members.

  5. Gas turbine sealing apparatus

    SciTech Connect

    Marra, John Joseph; Wessell, Brian J.; Liang, George

    2013-03-05

    A sealing apparatus in a gas turbine. The sealing apparatus includes a seal housing apparatus coupled to a disc/rotor assembly so as to be rotatable therewith during operation of the gas turbine. The seal housing apparatus comprises a base member, a first leg portion, a second leg portion, and spanning structure. The base member extends generally axially between forward and aft rows of rotatable blades and is positioned adjacent to a row of stationary vanes. The first leg portion extends radially inwardly from the base member and is coupled to the disc/rotor assembly. The second leg portion is axially spaced from the first leg portion, extends radially inwardly from the base member, and is coupled to the disc/rotor assembly. The spanning structure extends between and is rigidly coupled to each of the base member, the first leg portion, and the second leg portion.

  6. Wind turbine acoustic standards

    NASA Technical Reports Server (NTRS)

    Stephens, D. G.; Shepherd, K. P.; Grosveld, F.

    1981-01-01

    A program is being conducted to develop noise standards for wind turbines which minimize annoyance and which can be used to design specifications. The approach consists of presenting wind turbine noise stimuli to test subjects in a laboratory listening chamber. The responses of the subjects are recorded for a range of stimuli which encompass the designs, operating conditions, and ambient noise levels of current and future installations. Results to date have established the threshold of detectability for a range of impulsive stimuli of the type associated with blade/tower wake interactions. The status of the ongoing psychoacoustic tests, the subjective data, and the approach to the development of acoustic criteria/standards are described.

  7. Multiple piece turbine airfoil

    DOEpatents

    Kimmel, Keith D

    2010-11-09

    A turbine airfoil, such as a rotor blade or a stator vane, for a gas turbine engine, the airfoil formed as a shell and spar construction with a plurality of hook shaped struts each mounted within channels extending in a spanwise direction of the spar and the shell to allow for relative motion between the spar and shell in the airfoil chordwise direction while also fanning a seal between adjacent cooling channels. The struts provide the seal as well as prevent bulging of the shell from the spar due to the cooling air pressure. The hook struts have a hooked shaped end and a rounded shaped end in order to insert the struts into the spar.

  8. Turbine vane plate assembly

    DOEpatents

    Schiavo Jr., Anthony L.

    2006-01-10

    A turbine vane assembly includes a turbine vane having first and second shrouds with an elongated airfoil extending between. Each end of the airfoil transitions into a shroud at a respective junction. Each of the shrouds has a plurality of cooling passages, and the airfoil has a plurality of cooling passages extending between the first and second shrouds. A substantially flat inner plate and an outer plate are coupled to each of the first and second shrouds so as to form inner and outer plenums. Each inner plenum is defined between at least the junction and the substantially flat inner plate; each outer plenum is defined between at least the substantially flat inner plate and the outer plate. Each inner plenum is in fluid communication with a respective outer plenum through at least one of the cooling passages in the respective shroud.

  9. Snubber assembly for turbine blades

    DOEpatents

    Marra, John J

    2013-09-03

    A snubber associated with a rotatable turbine blade in a turbine engine, the turbine blade including a pressure sidewall and a suction sidewall opposed from the pressure wall. The snubber assembly includes a first snubber structure associated with the pressure sidewall of the turbine blade, a second snubber structure associated with the suction sidewall of the turbine blade, and a support structure. The support structure extends through the blade and is rigidly coupled at a first end portion thereof to the first snubber structure and at a second end portion thereof to the second snubber structure. Centrifugal loads exerted by the first and second snubber structures caused by rotation thereof during operation of the engine are at least partially transferred to the support structure, such that centrifugal loads exerted on the pressure and suctions sidewalls of the turbine blade by the first and second snubber structures are reduced.

  10. Transition in Turbines

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The concept of a large disturbance bypass mechanism for the initiation of transition is reviewed and studied. This mechanism, or some manifestation thereof, is suspected to be at work in the boundary layers present in a turbine flow passage. Discussion is presented on four relevant subtopics: (1) the effect of upstream disturbances and wakes on transition; (2) transition prediction models, code development, and verification; (3) transition and turbulence measurement techniques; and (4) the hydrodynamic condition of low Reynolds number boundary layers.

  11. Superconducting wind turbine generators

    NASA Astrophysics Data System (ADS)

    Abrahamsen, A. B.; Mijatovic, N.; Seiler, E.; Zirngibl, T.; Træholt, C.; Nørgård, P. B.; Pedersen, N. F.; Andersen, N. H.; Østergård, J.

    2010-03-01

    We have examined the potential of 10 MW superconducting direct drive generators to enter the European offshore wind power market and estimated that the production of about 1200 superconducting turbines until 2030 would correspond to 10% of the EU offshore market. The expected properties of future offshore turbines of 8 and 10 MW have been determined from an up-scaling of an existing 5 MW turbine and the necessary properties of the superconducting drive train are discussed. We have found that the absence of the gear box is the main benefit and the reduced weight and size is secondary. However, the main challenge of the superconducting direct drive technology is to prove that the reliability is superior to the alternative drive trains based on gearboxes or permanent magnets. A strategy of successive testing of superconducting direct drive trains in real wind turbines of 10 kW, 100 kW, 1 MW and 10 MW is suggested to secure the accumulation of reliability experience. Finally, the quantities of high temperature superconducting tape needed for a 10 kW and an extreme high field 10 MW generator are found to be 7.5 km and 1500 km, respectively. A more realistic estimate is 200-300 km of tape per 10 MW generator and it is concluded that the present production capacity of coated conductors must be increased by a factor of 36 by 2020, resulting in a ten times lower price of the tape in order to reach a realistic price level for the superconducting drive train.

  12. The small turbine revolution

    SciTech Connect

    Williams, P.L.

    1995-07-01

    Until the mid-1960s, improvements in technology and economies of scale made each new generating unit installed less expensive than the previous one. Later, bigger was still better. Larger units cost less per kilowatt than smaller units. Today, that may be changing. In some situations, distributed generation -the use of small, dispersed units (usually gas turbines) in the place of large central stations- can be the most attractive option.

  13. Gas turbine premixing systems

    DOEpatents

    Kraemer, Gilbert Otto; Varatharajan, Balachandar; Evulet, Andrei Tristan; Yilmaz, Ertan; Lacy, Benjamin Paul

    2013-12-31

    Methods and systems are provided for premixing combustion fuel and air within gas turbines. In one embodiment, a combustor includes an upstream mixing panel configured to direct compressed air and combustion fuel through premixing zone to form a fuel-air mixture. The combustor includes a downstream mixing panel configured to mix additional combustion fuel with the fule-air mixture to form a combustion mixture.

  14. Wind turbine generator system

    SciTech Connect

    Kirschbaum, H.S.

    1982-11-02

    Wind turbine generator systems incorporating a multi-speed pole amplitude modulated type dynamo electric machine allow efficient operation at consecutive speeds in a ratio preferably less than 2:1. A current limiting reactor, preferably including an inductance coil, and an over-running clutch, are utilized in conjunction with any multi-speed generation system to alleviate impact on a utility grid during switching among operational speeds.

  15. Airfoils for wind turbine

    DOEpatents

    Tangler, James L.; Somers, Dan M.

    1996-01-01

    Airfoils for the blade of a wind turbine wherein each airfoil is characterized by a thickness in a range from 16%-24% and a maximum lift coefficient designed to be largely insensitive to roughness effects. The airfoils include a family of airfoils for a blade 15 to 25 meters in length, a family of airfoils for a blade 1 to 5 meters in length, and a family of airfoils for a blade 5 to 10 meters in length.

  16. Airfoils for wind turbine

    DOEpatents

    Tangler, J.L.; Somers, D.M.

    1996-10-08

    Airfoils are disclosed for the blade of a wind turbine wherein each airfoil is characterized by a thickness in a range from 16%-24% and a maximum lift coefficient designed to be largely insensitive to roughness effects. The airfoils include a family of airfoils for a blade 15 to 25 meters in length, a family of airfoils for a blade 1 to 5 meters in length, and a family of airfoils for a blade 5 to 10 meters in length. 10 figs.

  17. Taming hurricanes with arrays of offshore wind turbines

    NASA Astrophysics Data System (ADS)

    Jacobson, Mark Z.; Archer, Cristina L.; Kempton, Willett

    2014-03-01

    Hurricanes are causing increasing damage to many coastal regions worldwide. Offshore wind turbines can provide substantial clean electricity year-round, but can they also mitigate hurricane damage while avoiding damage to themselves? This study uses an advanced climate-weather computer model that correctly treats the energy extraction of wind turbines to examine this question. It finds that large turbine arrays (300+ GW installed capacity) may diminish peak near-surface hurricane wind speeds by 25-41 m s-1 (56-92 mph) and storm surge by 6-79%. Benefits occur whether turbine arrays are placed immediately upstream of a city or along an expanse of coastline. The reduction in wind speed due to large arrays increases the probability of survival of even present turbine designs. The net cost of turbine arrays (capital plus operation cost less cost reduction from electricity generation and from health, climate, and hurricane damage avoidance) is estimated to be less than today’s fossil fuel electricity generation net cost in these regions and less than the net cost of sea walls used solely to avoid storm surge damage.

  18. Tornado type wind turbines

    SciTech Connect

    Hsu, Ch.-T.

    1984-06-05

    A tornado type wind turbine has a vertically disposed wind collecting tower with spaced apart inner and outer walls and a central bore. The upper end of the tower is open while the lower end of the structure is in communication with a wind intake chamber. An opening in the wind chamber is positioned over a turbine which is in driving communication with an electrical generator. An opening between the inner and outer walls at the lower end of the tower permits radially flowing air to enter the space between the inner and outer walls while a vertically disposed opening in the wind collecting tower permits tangentially flowing air to enter the central bore. A porous portion of the inner wall permits the radially flowing air to interact with the tangentially flowing air so as to create an intensified vortex flow which exits out of the top opening of the tower so as to create a low pressure core and thus draw air through the opening of the wind intake chamber so as to drive the turbine.

  19. Tornado type wind turbines

    DOEpatents

    Hsu, Cheng-Ting

    1984-01-01

    A tornado type wind turbine has a vertically disposed wind collecting tower with spaced apart inner and outer walls and a central bore. The upper end of the tower is open while the lower end of the structure is in communication with a wind intake chamber. An opening in the wind chamber is positioned over a turbine which is in driving communication with an electrical generator. An opening between the inner and outer walls at the lower end of the tower permits radially flowing air to enter the space between the inner and outer walls while a vertically disposed opening in the wind collecting tower permits tangentially flowing air to enter the central bore. A porous portion of the inner wall permits the radially flowing air to interact with the tangentially flowing air so as to create an intensified vortex flow which exits out of the top opening of the tower so as to create a low pressure core and thus draw air through the opening of the wind intake chamber so as to drive the turbine.

  20. Power turbine ventilation system

    NASA Technical Reports Server (NTRS)

    Wakeman, Thomas G. (Inventor); Brown, Richard W. (Inventor)

    1991-01-01

    Air control mechanism within a power turbine section of a gas turbine engine. The power turbine section includes a rotor and at least one variable pitch propulsor blade. The propulsor blade is coupled to and extends radially outwardly of the rotor. A first annular fairing is rotatable with the propulsor blade and interposed between the propulsor blade and the rotor. A second fairing is located longitudinally adjacent to the first fairing. The first fairing and the second fairing are differentially rotatable. The air control mechanism includes a platform fixedly coupled to a radially inner end of the propulsor blade. The platform is generally positioned in a first opening and a first fairing. The platform and the first fairing define an outer space. In a first position corresponding with a first propulsor blade pitch, the platform is substantially conformal with the first fairing. In a second position corresponding with the second propulsor blade pitch, an edge portion of the platform is displaced radially outwardly from the first fairing. When the blades are in the second position and rotating about the engine axis, the displacement of the edge portion with respect to the first fairing allows air to flow from the outer space to the annular cavity.

  1. Sonic boom acceptability studies

    NASA Astrophysics Data System (ADS)

    Shepherd, Kevin P.; Sullivan, Brenda M.; Leatherwood, Jack D.; McCurdy, David A.

    1992-04-01

    The determination of the magnitude of sonic boom exposure which would be acceptable to the general population requires, as a starting point, a method to assess and compare individual sonic booms. There is no consensus within the scientific and regulatory communities regarding an appropriate sonic boom assessment metric. Loudness, being a fundamental and well-understood attribute of human hearing was chosen as a means of comparing sonic booms of differing shapes and amplitudes. The figure illustrates the basic steps which yield a calculated value of loudness. Based upon the aircraft configuration and its operating conditions, the sonic boom pressure signature which reaches the ground is calculated. This pressure-time history is transformed to the frequency domain and converted into a one-third octave band spectrum. The essence of the loudness method is to account for the frequency response and integration characteristics of the auditory system. The result of the calculation procedure is a numerical description (perceived level, dB) which represents the loudness of the sonic boom waveform.

  2. Sonic boom acceptability studies

    NASA Technical Reports Server (NTRS)

    Shepherd, Kevin P.; Sullivan, Brenda M.; Leatherwood, Jack D.; Mccurdy, David A.

    1992-01-01

    The determination of the magnitude of sonic boom exposure which would be acceptable to the general population requires, as a starting point, a method to assess and compare individual sonic booms. There is no consensus within the scientific and regulatory communities regarding an appropriate sonic boom assessment metric. Loudness, being a fundamental and well-understood attribute of human hearing was chosen as a means of comparing sonic booms of differing shapes and amplitudes. The figure illustrates the basic steps which yield a calculated value of loudness. Based upon the aircraft configuration and its operating conditions, the sonic boom pressure signature which reaches the ground is calculated. This pressure-time history is transformed to the frequency domain and converted into a one-third octave band spectrum. The essence of the loudness method is to account for the frequency response and integration characteristics of the auditory system. The result of the calculation procedure is a numerical description (perceived level, dB) which represents the loudness of the sonic boom waveform.

  3. Accepted Common Interest Community (CIC) Proposals.

    PubMed

    2014-01-01

    These are the 18 accepted proposals for the three Common Interest Community (CIC) sessions at IAYT's Symposium on Yoga Therapy and Research (SYTAR), June 5-8, 2014, in Austin, Texas and published in the Final Program Guide and CIC Works for SYTAR 2014. The sessions were CIC#1 Rehab Professionals: Bridging the Past with the Future and CIC#2a & CIC#2b Mental, Emotional and Spiritual Health. PMID:25645135

  4. Smoother Turbine Blades Resist Thermal Shock Better

    NASA Technical Reports Server (NTRS)

    Czerniak, Paul; Longenecker, Kent; Paulus, Don; Ullman, Zane

    1991-01-01

    Surface treatment increases resistance of turbine blades to low-cycle fatigue. Smoothing removes small flaws where cracks start. Intended for blades in turbines subject to thermal shock of rapid starting. No recrystallization occurs at rocket-turbine operating temperatures.

  5. Probabilistic characterization of wind turbine blades via aeroelasticity and spinning finite element formulation

    NASA Astrophysics Data System (ADS)

    Velazquez, Antonio; Swartz, R. Andrew

    2012-04-01

    Wind energy is an increasingly important component of this nation's renewable energy portfolio, however safe and economical wind turbine operation is a critical need to ensure continued adoption. Safe operation of wind turbine structures requires not only information regarding their condition, but their operational environment. Given the difficulty inherent in SHM processes for wind turbines (damage detection, location, and characterization), some uncertainty in conditional assessment is expected. Furthermore, given the stochastic nature of the loading on turbine structures, a probabilistic framework is appropriate to characterize their risk of failure at a given time. Such information will be invaluable to turbine controllers, allowing them to operate the structures within acceptable risk profiles. This study explores the characterization of the turbine loading and response envelopes for critical failure modes of the turbine blade structures. A framework is presented to develop an analytical estimation of the loading environment (including loading effects) based on the dynamic behavior of the blades. This is influenced by behaviors including along and across-wind aero-elastic effects, wind shear gradient, tower shadow effects, and centrifugal stiffening effects. The proposed solution includes methods that are based on modal decomposition of the blades and require frequent updates to the estimated modal properties to account for the time-varying nature of the turbine and its environment. The estimated demand statistics are compared to a code-based resistance curve to determine a probabilistic estimate of the risk of blade failure given the loading environment.

  6. Regenerative superheated steam turbine cycles

    NASA Technical Reports Server (NTRS)

    Fuller, L. C.; Stovall, T. K.

    1980-01-01

    PRESTO computer program was developed to analyze performance of wide range of steam turbine cycles with special attention given to regenerative superheated steam turbine cycles. It can be used to model standard turbine cycles, including such features as process steam extraction, induction and feedwater heating by external sources, peaking, and high back pressure. Expansion line efficiencies, exhaust loss, leakages, mechanical losses, and generator losses are used to calculate cycle heat rate and generator output. Program provides power engineer with flexible aid for design and analysis of steam turbine systems.

  7. Shaken, not stirred: The recipe for a fish-friendly turbine

    SciTech Connect

    Cada, G.F.

    1997-03-01

    It is generally agreed that injuries and mortalities among turbine-passed fish can result from several mechanisms, including rapid and extreme water pressure changes, cavitation, shear, turbulence, and mechanical injuries (strike and grinding). Advances in the instrumentation available for monitoring hydraulic conditions and Computational Fluid Dynamics (CFD) techniques now make it possible both to estimate accurately the levels of these potential injury mechanisms in operating turbines and to predict the levels in new turbine designs. This knowledge can be used to {open_quotes}design-out{close_quotes} the most significant injury mechanisms in the next generation of turbines. However, further improvements in turbine design are limited by a poor understanding of the levels of mechanical and hydraulic stresses that can be tolerated by turbine-passed fish. The turbine designers need numbers (biological criteria) that define a safety zone for fish within which pressures, shear forces, cavitation, and chance of mechanical strike are all at acceptable levels for survival. This paper presents the results of a literature review of fish responses to the types of biological stresses associated with turbine passage, as studied separately under controlled conditions in the laboratory rather than in combination at field sites. Some of the controlled laboratory and field studies reviewed here were bioassays carried out for reasons unrelated to hydropower production. Analysis of this literature was used to develop provisional biological criteria for hydroelectric turbine designers. These biological criteria have been utilized in the U.S. Department of Energy`s Advanced Hydropower Turbine System (AHTS) Program to evaluate the results of conceptual engineering designs and the potential value of future turbine models and prototypes.

  8. Design and aero-acoustic analysis of a counter-rotating wind turbine

    NASA Astrophysics Data System (ADS)

    Agrawal, Vineesh V.

    Wind turbines have become an integral part of the energy business because they are one of the most economical and reliable sources of renewable energy. Conventional wind turbines are capable of capturing less than half of the energy present in the wind. Hence, to make the wind turbines more efficient, it is important to increase their performance. A horizontal axis wind turbine with multiple rotors is one concept that can achieve a higher power conversion rate. Also, a concern for wind energy is the noise generated by wind turbines. Hence, an investigation into the acoustic behavior of a multi-rotor horizontal axis wind turbine is required. In response to the need of a wind turbine design with higher power coefficient, a unique design of a counter-rotating horizontal axis wind turbine (CR-HAWT) is proposed. The Blade Element Momentum (BEM) theory is used to aerodynamically design the blades of the two rotors. Modifications are made to the BEM theory to accommodate the interaction of the two rotors. The tower effect on the noise generation of the downwind rotor is investigated. Predictions are made for the total noise generated by the wind turbine at its design operating conditions. A total power coefficient of 65.2% is predicted for the proposed CR-HAWT design. A low tip speed ratio is chosen to minimize the noise generation. The aeroacoustic analysis of the CR-HAWT shows that the noise generated at its design operating conditions is within an acceptable range. Thus, the CR-HAWT is predicted to be a quiet wind turbine with a high power coefficient, making it highly desirable for small wind turbine applications.

  9. Composite wind turbine blades

    NASA Astrophysics Data System (ADS)

    Ong, Cheng-Huat

    Researchers in wind energy industry are constantly moving forward to develop higher efficiency wind turbine. One major component for wind turbine design is to have cost effective wind turbine blades. In addition to correct aerodynamic shape and blade geometry, blade performance can be enhanced further through aero-elastic tailoring design and material selections. An analytical tool for blade design has been improved and validated. This analytical tool is utilized to resolve issues related to elastic tailoring design. The investigation looks into two major issues related to the design and fabrication of a bend-twist-coupled blade. Various design parameters for a blade such as materials, laminate lay-up, skin thickness, ply orientation, internal spar, etc. have been examined for designing a bend-twist-coupled blade. The parametric study indicates that the critical design parameters are the ply material, the ply orientation, and the volume fraction ratio between the anisotropic layers and orthotropic layers. To produce a blade having the bend-twist coupling characteristics, the fiber lay-ups at the top and bottom skins of the blade must have a "mirror" lay-up in relation to the middle plane of the blade. Such lay-up causes fiber discontinuation at the seam. The joint design at the seam is one major consideration in fabricating a truly anisotropic blade. A new joint design was proposed and tensile failure tests were carried out for both the old and new joint designs. The tests investigated the effects of different types of joint designs, the laminate lay-up at the joints, and the stacking sequence of the joint retention strength. A major component of a wind turbine blade, D-spar, was designed to maximum coupling. Two D-spars were then fabricated using the new joint design; one of them was subjected to both static and modal testings. Traditionally, wind turbine blades are made of low cost glass material; however, carbon fibers are proposed as alternative material. Our

  10. 44. KNIGHT WATER IMPULSE TURBINES 12'. THESE TWO TURBINES ARE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. KNIGHT WATER IMPULSE TURBINES 12'. THESE TWO TURBINES ARE SIMILAR TO THOSE THAT POWER THE FOUNDRY AND ENABLE PRODUCTION OF CAST MACHINERY PARTS SUCH AS THOSE IN THE BACKGROUND, RECENTLY MADE FOR RESTORING RAILROAD TURNTABLES IN CAMINO, FOLSOM, PLACERVILLE, AND PARIS, CALIFORNIA. - Knight Foundry, 13 Eureka Street, Sutter Creek, Amador County, CA

  11. 63. VIEW OF TYPICAL TURBINE IN TURBINE WELL IN POWERHOUSE, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    63. VIEW OF TYPICAL TURBINE IN TURBINE WELL IN POWERHOUSE, LOOKING DOWN THE SHAFT FROM JUST ABOVE NORMAL WATER LEVEL. LADDER IS ON DOWNSTREAM WALL. PHOTOGRAPHER STOOD ON DECK SHOWN IN LOWER LEFT CORNER - Swan Falls Dam, Snake River, Kuna, Ada County, ID

  12. Novel Diagnostics to Investigate Turbine-Turbine Interactions

    NASA Astrophysics Data System (ADS)

    Balakumar, B. J.; Pol, S.

    2011-11-01

    Strong aerodynamic interactions between upstream wind turbine wakes and downstream turbine blades cause fatigue loads and reduce turbine reliability. The wake structure also mediates the vertical flux of momentum and affects the power output of downstream turbines in turbine arrays. Despite their importance, our current understanding of wake-turbine interactions and wake structure is limited, especially under complex operating conditions such as yawed inflow and dynamic stall. Traditional diagnostics such as sonic anemometers, hotwires, and lidars suffer from interference and accuracy limitations and prove inadequate. At LANL, we have developed a Large Field-of-View Particle Image Velocimeter (LF-PIV) capable of measuring 3 m ×1 m (per camera) wake and inflow regions around a 5m-scale turbine. This scalable diagnostic operates in conjunction with a hub-mounted Rotating PIV (R-PIV) diagnostic to observe blade boundary layer and separation while the turbine is in operation. We discuss the diagnostic development challenges, solutions used to overcome these, and the interesting physics that these diagnostics promise to illuminate. Supported by LANL LDRD grant 20100040DR (PI: Curtt Ammerman).

  13. Energy harvesting to power sensing hardware onboard wind turbine blade

    SciTech Connect

    Carlson, Clinton P; Schichting, Alexander D; Quellette, Scott; Farinholt, Kevin M; Park, Gyuhae

    2009-10-05

    Wind turbines are becoming a larger source of renewable energy in the United States. However, most of the designs are geared toward the weather conditions seen in Europe. Also, in the United States, manufacturers have been increasing the length of the turbine blades, often made of composite materials, to maximize power output. As a result of the more severe loading conditions in the United States and the material level flaws in composite structures, blade failure has been a more common occurrence in the U.S. than in Europe. Therefore, it is imperative that a structural health monitoring system be incorporated into the design of the wind turbines in order to monitor flaws before they lead to a catastrophic failure. Due to the rotation of the turbine and issues related to lightning strikes, the best way to implement a structural health monitoring system would be to use a network of wireless sensor nodes. In order to provide power to these sensor nodes, piezoelectric, thermoelectric and photovoltaic energy harvesting techniques are examined on a cross section of a CX-100 wind turbine blade in order to determine the feasibility of powering individual nodes that would compose the sensor network.

  14. Staff Acceptance of Tele-ICU Coverage

    PubMed Central

    Chan, Paul S.; Cram, Peter

    2011-01-01

    Background: Remote coverage of ICUs is increasing, but staff acceptance of this new technology is incompletely characterized. We conducted a systematic review to summarize existing research on acceptance of tele-ICU coverage among ICU staff. Methods: We searched for published articles pertaining to critical care telemedicine systems (aka, tele-ICU) between January 1950 and March 2010 using PubMed, Cumulative Index to Nursing and Allied Health Literature, Global Health, Web of Science, and the Cochrane Library and abstracts and presentations delivered at national conferences. Studies were included if they provided original qualitative or quantitative data on staff perceptions of tele-ICU coverage. Studies were imported into content analysis software and coded by tele-ICU configuration, methodology, participants, and findings (eg, positive and negative staff evaluations). Results: Review of 3,086 citations yielded 23 eligible studies. Findings were grouped into four categories of staff evaluation: overall acceptance level of tele-ICU coverage (measured in 70% of studies), impact on patient care (measured in 96%), impact on staff (measured in 100%), and organizational impact (measured in 48%). Overall acceptance was high, despite initial ambivalence. Favorable impact on patient care was perceived by > 82% of participants. Staff impact referenced enhanced collaboration, autonomy, and training, although scrutiny, malfunctions, and contradictory advice were cited as potential barriers. Staff perceived the organizational impact to vary. An important limitation of available studies was a lack of rigorous methodology and validated survey instruments in many studies. Conclusions: Initial reports suggest high levels of staff acceptance of tele-ICU coverage, but more rigorous methodologic study is required. PMID:21051386

  15. Estimating annoyance to calculated wind turbine shadow flicker is improved when variables associated with wind turbine noise exposure are considered.

    PubMed

    Voicescu, Sonia A; Michaud, David S; Feder, Katya; Marro, Leonora; Than, John; Guay, Mireille; Denning, Allison; Bower, Tara; van den Berg, Frits; Broner, Norm; Lavigne, Eric

    2016-03-01

    The Community Noise and Health Study conducted by Health Canada included randomly selected participants aged 18-79 yrs (606 males, 632 females, response rate 78.9%), living between 0.25 and 11.22 km from operational wind turbines. Annoyance to wind turbine noise (WTN) and other features, including shadow flicker (SF) was assessed. The current analysis reports on the degree to which estimating high annoyance to wind turbine shadow flicker (HAWTSF) was improved when variables known to be related to WTN exposure were also considered. As SF exposure increased [calculated as maximum minutes per day (SFm)], HAWTSF increased from 3.8% at 0 ≤ SFm < 10 to 21.1% at SFm ≥ 30, p < 0.0001. For each unit increase in SFm the odds ratio was 2.02 [95% confidence interval: (1.68,2.43)]. Stepwise regression models for HAWTSF had a predictive strength of up to 53% with 10% attributed to SFm. Variables associated with HAWTSF included, but were not limited to, annoyance to other wind turbine-related features, concern for physical safety, and noise sensitivity. Reported dizziness was also retained in the final model at p = 0.0581. Study findings add to the growing science base in this area and may be helpful in identifying factors associated with community reactions to SF exposure from wind turbines. PMID:27036286

  16. A Numerical Investigation of Turbine Noise Source Hierarchy and Its Acoustic Transmission Characteristics

    NASA Technical Reports Server (NTRS)

    VanZante, Dale; Envia, Edmane

    2008-01-01

    Understanding the relative importance of the various turbine noise generation mechanisms and the characteristics of the turbine acoustic transmission loss are essential ingredients in developing robust reduced-order models for predicting the turbine noise signature. A computationally based investigation has been undertaken to help guide the development of a turbine noise prediction capability that does not rely on empiricism. The investigation relies on highly detailed numerical simulations of the unsteady flowfield inside a modern high-pressure turbine (HPT). The simulations are developed using TURBO, which is an unsteady Reynolds-averaged Navier-Stokes (URANS) code capable of multi-stage simulations. The purpose of this study is twofold. First, to determine an estimate of the relative importance of the contributions to the coherent part of the acoustic signature of a turbine from the three potential sources of turbine noise generation, namely, blade-row viscous interaction, potential field interaction, and entropic source associated with the interaction of the blade rows with the temperature nonuniformities caused by the incomplete mixing of the hot fluid and the cooling flow. Second, to develop an understanding of the turbine acoustic transmission characteristics and to assess the applicability of existing empirical and analytical transmission loss models to realistic geometries and flow conditions for modern turbine designs. The investigation so far has concentrated on two simulations: (1) a single-stage HPT and (2) a two-stage HPT and the associated inter-turbine duct/strut segment. The simulations are designed to resolve up to the second harmonic of the blade passing frequency tone in accordance with accepted rules for second order solvers like TURBO. The calculations include blade and vane cooling flows and a radial profile of pressure and temperature at the turbine inlet. The calculation can be modified later to include the combustor pattern factor at the

  17. Coupled Dynamic Modeling of Floating Wind Turbine Systems: Preprint

    SciTech Connect

    Wayman, E. N.; Sclavounos, P. D.; Butterfield, S.; Jonkman, J.; Musial, W.

    2006-03-01

    was also performed. Key cost components included the material and construction costs of the buoy; material and installation costs of the tethers, mooring lines, and anchor technologies; costs of transporting and installing the system at the chosen site; and the cost of mounting the wind turbine to the platform. The two systems were evaluated based on their static and dynamic performance and the total system installed cost. Both systems demonstrated acceptable motions, and have estimated costs of $1.4-$1.8 million, not including the cost of the wind turbine, the power electronics, or the electrical transmission.

  18. NEXT GENERATION TURBINE PROGRAM

    SciTech Connect

    William H. Day

    2002-05-03

    The Next Generation Turbine (NGT) Program's technological development focused on a study of the feasibility of turbine systems greater than 30 MW that offer improvement over the 1999 state-of-the-art systems. This program targeted goals of 50 percent turndown ratios, 15 percent reduction in generation cost/kW hour, improved service life, reduced emissions, 400 starts/year with 10 minutes to full load, and multiple fuel usage. Improvement in reliability, availability, and maintainability (RAM), while reducing operations, maintenance, and capital costs by 15 percent, was pursued. This program builds on the extensive low emissions stationary gas turbine work being carried out by Pratt & Whitney (P&W) for P&W Power Systems (PWPS), which is a company under the auspices of the United Technologies Corporation (UTC). This study was part of the overall Department of Energy (DOE) NGT Program that extends out to the year 2008. A follow-on plan for further full-scale component hardware testing is conceptualized for years 2002 through 2008 to insure a smooth and efficient transition to the marketplace for advanced turbine design and cycle technology. This program teamed the National Energy Technology Laboratory (NETL), P&W, United Technologies Research Center (UTRC), kraftWork Systems Inc., a subcontractor on-site at UTRC, and Multiphase Power and Processing Technologies (MPPT), an off-site subcontractor. Under the auspices of the NGT Program, a series of analyses were performed to identify the NGT engine system's ability to serve multiple uses. The majority were in conjunction with a coal-fired plant, or used coal as the system fuel. Identified also was the ability of the NGT system to serve as the basis of an advanced performance cycle: the humid air turbine (HAT) cycle. The HAT cycle is also used with coal gasification in an integrated cycle HAT (IGHAT). The NGT systems identified were: (1) Feedwater heating retrofit to an existing coal-fired steam plant, which could supply

  19. Adaptive neuro-fuzzy methodology for noise assessment of wind turbine.

    PubMed

    Shamshirband, Shahaboddin; Petković, Dalibor; Hashim, Roslan; Motamedi, Shervin

    2014-01-01

    Wind turbine noise is one of the major obstacles for the widespread use of wind energy. Noise tone can greatly increase the annoyance factor and the negative impact on human health. Noise annoyance caused by wind turbines has become an emerging problem in recent years, due to the rapid increase in number of wind turbines, triggered by sustainable energy goals set forward at the national and international level. Up to now, not all aspects of the generation, propagation and perception of wind turbine noise are well understood. For a modern large wind turbine, aerodynamic noise from the blades is generally considered to be the dominant noise source, provided that mechanical noise is adequately eliminated. The sources of aerodynamic noise can be divided into tonal noise, inflow turbulence noise, and airfoil self-noise. Many analytical and experimental acoustical studies performed the wind turbines. Since the wind turbine noise level analyzing by numerical methods or computational fluid dynamics (CFD) could be very challenging and time consuming, soft computing techniques are preferred. To estimate noise level of wind turbine, this paper constructed a process which simulates the wind turbine noise levels in regard to wind speed and sound frequency with adaptive neuro-fuzzy inference system (ANFIS). This intelligent estimator is implemented using Matlab/Simulink and the performances are investigated. The simulation results presented in this paper show the effectiveness of the developed method. PMID:25075621

  20. Adaptive Neuro-Fuzzy Methodology for Noise Assessment of Wind Turbine

    PubMed Central

    Shamshirband, Shahaboddin; Petković, Dalibor; Hashim, Roslan; Motamedi, Shervin

    2014-01-01

    Wind turbine noise is one of the major obstacles for the widespread use of wind energy. Noise tone can greatly increase the annoyance factor and the negative impact on human health. Noise annoyance caused by wind turbines has become an emerging problem in recent years, due to the rapid increase in number of wind turbines, triggered by sustainable energy goals set forward at the national and international level. Up to now, not all aspects of the generation, propagation and perception of wind turbine noise are well understood. For a modern large wind turbine, aerodynamic noise from the blades is generally considered to be the dominant noise source, provided that mechanical noise is adequately eliminated. The sources of aerodynamic noise can be divided into tonal noise, inflow turbulence noise, and airfoil self-noise. Many analytical and experimental acoustical studies performed the wind turbines. Since the wind turbine noise level analyzing by numerical methods or computational fluid dynamics (CFD) could be very challenging and time consuming, soft computing techniques are preferred. To estimate noise level of wind turbine, this paper constructed a process which simulates the wind turbine noise levels in regard to wind speed and sound frequency with adaptive neuro-fuzzy inference system (ANFIS). This intelligent estimator is implemented using Matlab/Simulink and the performances are investigated. The simulation results presented in this paper show the effectiveness of the developed method. PMID:25075621

  1. Tribological advancements for reliable wind turbine performance.

    PubMed

    Kotzalas, Michael N; Doll, Gary L

    2010-10-28

    Wind turbines have had various limitations to their mechanical system reliability owing to tribological problems over the past few decades. While several studies show that turbines are becoming more reliable, it is still not at an overall acceptable level to the operators based on their current business models. Data show that the electrical components are the most problematic; however, the parts are small, thus easy and inexpensive to replace in the nacelle, on top of the tower. It is the tribological issues that receive the most attention as they have higher costs associated with repair or replacement. These include the blade pitch systems, nacelle yaw systems, main shaft bearings, gearboxes and generator bearings, which are the focus of this review paper. The major tribological issues in wind turbines and the technological developments to understand and solve them are discussed within. The study starts with an overview of fretting corrosion, rolling contact fatigue, and frictional torque of the blade pitch and nacelle yaw bearings, and references to some of the recent design approaches applied to solve them. Also included is a brief overview into lubricant contamination issues in the gearbox and electric current discharge or arcing damage of the generator bearings. The primary focus of this review is the detailed examination of main shaft spherical roller bearing micropitting and gearbox bearing scuffing, micropitting and the newer phenomenon of white-etch area flaking. The main shaft and gearbox are integrally related and are the most commonly referred to items involving expensive repair costs and downtime. As such, the latest research and developments related to the cause of the wear and damage modes and the technologies used or proposed to solve them are presented. PMID:20855322

  2. Studies of Mini-Turbines

    NASA Astrophysics Data System (ADS)

    Chan, Stacey; Endo, Masaki; Romanko, Michael; Williamson, Chk

    2013-11-01

    Urban environments are inaccessible to large wind turbines of the classical ``windmill'' design. By exploring small-scale vertical-axis wind turbines (VAWTs), wind energy can possibly be harvested from the constrained spaces within cities. We present a comprehensive study of blade offset pitch angle and relative blade size (ratio of blade chordlength/turbine diameter, c/D). We find that the optimal pitch angle for a symmetric blade is the angle at which the midpoint chordline is tangent to the turbine circumference. Also, a turbine with conventional blades of small c/D ratio (c/D = 0.12) - typical of large scale turbines - do not operate well at low Reynolds numbers. On the other hand, the maximum coefficient of power for turbines with larger c/D ratio (c/D = 0.36) is much higher than for the conventional small-blades. As blade size increases, the operating range of TSR (Tip Speed Ratio) also increases, making large-chord turbines more robust to the prevailing wind conditions. Surprisingly, the regime of TSR for maximum power extracted, at these low Reynolds numbers, corresponds with small or even negative power predictions, based on streamtube theory.

  3. Fretting in aircraft turbine engines

    NASA Technical Reports Server (NTRS)

    Johnson, R. L.; Bill, R. C.

    1974-01-01

    The problem of fretting in aircraft turbine engines is discussed. Critical fretting can occur on fan, compressor, and turbine blade mountings, as well as on splines, rolling element bearing races, and secondary sealing elements of face type seals. Structural fatigue failures have been shown to occur at fretted areas on component parts. Methods used by designers to reduce the effects of fretting are given.

  4. Optimum propeller wind turbines

    NASA Astrophysics Data System (ADS)

    Sanderson, R. J.; Archer, R. D.

    1983-12-01

    The Prandtl-Betz-Theodorsen theory of heavily loaded airscrews has been adapted to the design of propeller windmills which are to be optimized for maximum power coefficient. It is shown that the simpler, light-loading, constant-area wake assumption can generate significantly different 'optimum' performance and geometry, and that it is therefore not appropriate to the design of propeller wind turbines when operating in their normal range of high-tip-speed-to-wind-speed ratio. Design curves for optimum power coefficient are presented and an example of the design of a typical two-blade optimum rotor is given.

  5. Turbine airfoil film cooling

    NASA Astrophysics Data System (ADS)

    Hylton, Larry D.

    1986-10-01

    Emphasis is placed on developing more accurate analytical models for predicting turbine airfoil external heat transfer rates. Performance goals of new engines require highly refined, accurate design tools to meet durability requirements. In order to obtain improvements in analytical capabilities, programs are required which focus on enhancing analytical techniques through verification of new models by comparison with relevant experimental data. The objectives of the current program are to develop an analytical approach, based on boundary layer theory, for predicting the effects of airfoil film cooling on downstream heat transfer rates and to verify the resulting analytical method by comparison of predictions with hot cascade data obtained under this program.

  6. Wind Turbine Dynamics

    NASA Technical Reports Server (NTRS)

    Thresher, R. W. (Editor)

    1981-01-01

    Recent progress in the analysis and prediction of the dynamic behavior of wind turbine generators is discussed. The following areas were addressed: (1) the adequacy of state of the art analysis tools for designing the next generation of wind power systems; (2) the use of state of the art analysis tools designers; and (3) verifications of theory which might be lacking or inadequate. Summaries of these informative discussions as well as the questions and answers which followed each paper are documented in the proceedings.

  7. Alternative aviation turbine fuels

    NASA Technical Reports Server (NTRS)

    Grobman, J.

    1977-01-01

    The efficient utilization of fossil fuels by future jet aircraft may necessitate the broadening of current aviation turbine fuel specifications. The most significant changes in specifications would be an increased aromatics content and a higher final boiling point in order to minimize refinery energy consumption and costs. These changes would increase the freezing point and might lower the thermal stability of the fuel and could cause increased pollutant emissions, increased smoke and carbon formation, increased combustor liner temperatures, and poorer ignition characteristics. This paper discusses the effects that broadened specification fuels may have on present-day jet aircraft and engine components and the technology required to use fuels with broadened specifications.

  8. Trends in gas turbine development

    SciTech Connect

    Day, W.H.

    1999-07-01

    This paper represents the Gas Turbine Association's view of the gas turbine industry's R and D needs following the Advanced Turbine Systems (ATS) Program which is funded by the U.S. Department of Energy (DOE). Some of this information was discussed at the workshop Next Generation Gas Turbine Power Systems, which was held in Austin, TX, February 9--10, 1999, sponsored by DOE-Federal Energy Technology Center (FETC), reference 1. The general idea is to establish public-private partnerships to reduce the risks involved in the development of new technologies which results in public benefits. The recommendations in this paper are focused on gas turbines > 30 MW output. Specific GTA recommendations on smaller systems are not addressed here. They will be addressed in conjunction with DOE-Energy Efficiency.

  9. Wind turbine response to parameter variation of analytic inflow vortices

    NASA Astrophysics Data System (ADS)

    Hand, M. Maureen; Robinson, Michael C.; Balas, Mark J.

    2006-05-01

    As larger wind turbines are placed on taller towers, rotors frequently operate in atmospheric conditions that support organized, coherent turbulent structures. It is hypothesized that these structures have a detrimental impact on the blade fatigue life experienced by the wind turbine. These structures are extremely difficult to identify with sophisticated anemometry such as ultrasonic anemometers. This study was performed to identify the vortex characteristics that contribute to high-amplitude cyclic blade loads, assuming that these vortices exist under certain atmospheric conditions. This study does not attempt to demonstrate the existence of these coherent turbulent structures. In order to ascertain the idealized worst-case scenario for vortical inflow structures impinging on a wind turbine rotor, we created a simple, analytic vortex model. The Rankine vortex model assumes that the vortex core undergoes solid body rotation to avoid a singularity at the vortex centre and is surrounded by a two-dimensional potential flow field. Using the wind turbine as a sensor and the FAST wind turbine dynamics code with limited degrees of freedom, we determined the aerodynamic loads imparted to the wind turbine by the vortex structure. We varied the size, strength, rotational direction, plane of rotation, and location of the vortex over a wide range of operating parameters. We identified the vortex conformation with the most significant effect on the blade root bending moment cyclic amplitude. Vortices with radii on the scale of the rotor diameter or smaller caused blade root bending moment cyclic amplitudes that contribute to high damage density. The rotational orientation, clockwise or counter-clockwise, produces little difference in the bending moment response. Vortices in the XZ plane produce bending moment amplitudes significantly greater than vortices in the YZ plane. Published in 2005 by John Wiley & Sons, Ltd.Received: 9 April 2004; Revised: 14 March 2005; Accepted: 19

  10. Vertical-Axis Wind Turbine Mesh Generator

    2014-01-24

    VAWTGen is a mesh generator for creating a finite element beam mesh of arbitrary vertical-axis wind turbines (VAWT). The software accepts input files specifying tower and blade structural and aerodynamic descriptions and constructs a VAWT using a minimal set of inputs. VAWTs with an arbitrary number of blades can be constructed with or without a central tower. Strut connections between the tower and blades can be specified in an arbitrary manner. The software also facilitatesmore » specifying arbitrary joints between structural components and concentrated structural tenns (mass and stiffness). The output files which describe the VAWT configuration are intended to be used with the Offshore Wind ENergy Simulation (OWENS) Toolkit software for structural dynamics analysis of VAWTs. Furthermore, VAWTGen is useful for visualizing output from the OWENS analysis software.« less

  11. Vertical-Axis Wind Turbine Mesh Generator

    SciTech Connect

    2014-01-24

    VAWTGen is a mesh generator for creating a finite element beam mesh of arbitrary vertical-axis wind turbines (VAWT). The software accepts input files specifying tower and blade structural and aerodynamic descriptions and constructs a VAWT using a minimal set of inputs. VAWTs with an arbitrary number of blades can be constructed with or without a central tower. Strut connections between the tower and blades can be specified in an arbitrary manner. The software also facilitates specifying arbitrary joints between structural components and concentrated structural tenns (mass and stiffness). The output files which describe the VAWT configuration are intended to be used with the Offshore Wind ENergy Simulation (OWENS) Toolkit software for structural dynamics analysis of VAWTs. Furthermore, VAWTGen is useful for visualizing output from the OWENS analysis software.

  12. Calculation of gas turbine characteristic

    NASA Astrophysics Data System (ADS)

    Mamaev, B. I.; Murashko, V. L.

    2016-04-01

    The reasons and regularities of vapor flow and turbine parameter variation depending on the total pressure drop rate π* and rotor rotation frequency n are studied, as exemplified by a two-stage compressor turbine of a power-generating gas turbine installation. The turbine characteristic is calculated in a wide range of mode parameters using the method in which analytical dependences provide high accuracy for the calculated flow output angle and different types of gas dynamic losses are determined with account of the influence of blade row geometry, blade surface roughness, angles, compressibility, Reynolds number, and flow turbulence. The method provides satisfactory agreement of results of calculation and turbine testing. In the design mode, the operation conditions for the blade rows are favorable, the flow output velocities are close to the optimal ones, the angles of incidence are small, and the flow "choking" modes (with respect to consumption) in the rows are absent. High performance and a nearly axial flow behind the turbine are obtained. Reduction of the rotor rotation frequency and variation of the pressure drop change the flow parameters, the parameters of the stages and the turbine, as well as the form of the characteristic. In particular, for decreased n, nonmonotonic variation of the second stage reactivity with increasing π* is observed. It is demonstrated that the turbine characteristic is mainly determined by the influence of the angles of incidence and the velocity at the output of the rows on the losses and the flow output angle. The account of the growing flow output angle due to the positive angle of incidence for decreased rotation frequencies results in a considerable change of the characteristic: poorer performance, redistribution of the pressure drop at the stages, and change of reactivities, growth of the turbine capacity, and change of the angle and flow velocity behind the turbine.

  13. Acceptable regret in medical decision making.

    PubMed

    Djulbegovic, B; Hozo, I; Schwartz, A; McMasters, K M

    1999-09-01

    When faced with medical decisions involving uncertain outcomes, the principles of decision theory hold that we should select the option with the highest expected utility to maximize health over time. Whether a decision proves right or wrong can be learned only in retrospect, when it may become apparent that another course of action would have been preferable. This realization may bring a sense of loss, or regret. When anticipated regret is compelling, a decision maker may choose to violate expected utility theory to avoid regret. We formulate a concept of acceptable regret in medical decision making that explicitly introduces the patient's attitude toward loss of health due to a mistaken decision into decision making. In most cases, minimizing expected regret results in the same decision as maximizing expected utility. However, when acceptable regret is taken into consideration, the threshold probability below which we can comfortably withhold treatment is a function only of the net benefit of the treatment, and the threshold probability above which we can comfortably administer the treatment depends only on the magnitude of the risks associated with the therapy. By considering acceptable regret, we develop new conceptual relations that can help decide whether treatment should be withheld or administered, especially when the diagnosis is uncertain. This may be particularly beneficial in deciding what constitutes futile medical care. PMID:10580533

  14. Optical control and diagnostics sensors for gas turbine machinery

    NASA Astrophysics Data System (ADS)

    Trolinger, James D.; Jenkins, Thomas P.; Heeg, Bauke

    2012-10-01

    There exists a vast range of optical techniques that have been under development for solving complex measurement problems related to gas-turbine machinery and phenomena. For instance, several optical techniques are ideally suited for studying fundamental combustion phenomena in laboratory environments. Yet other techniques hold significant promise for use as either on-line gas turbine control sensors, or as health monitoring diagnostics sensors. In this paper, we briefly summarize these and discuss, in more detail, some of the latter class of techniques, including phosphor thermometry, hyperspectral imaging and low coherence interferometry, which are particularly suited for control and diagnostics sensing on hot section components with ceramic thermal barrier coatings (TBCs).

  15. Accepters and Rejecters of Counseling.

    ERIC Educational Resources Information Center

    Rose, Harriett A.; Elton, Charles F.

    Personality differences between students who accept or reject proffered counseling assistance were investigated by comparing personality traits of 116 male students at the University of Kentucky who accepted or rejected letters of invitation to group counseling. Factor analysis of Omnibus Personality Inventory (OPI) scores to two groups of 60 and…

  16. Cone penetrometer acceptance test report

    SciTech Connect

    Boechler, G.N.

    1996-09-19

    This Acceptance Test Report (ATR) documents the results of acceptance test procedure WHC-SD-WM-ATR-151. Included in this report is a summary of the tests, the results and issues, the signature and sign- off ATP pages, and a summarized table of the specification vs. ATP section that satisfied the specification.

  17. TURBINE COOLING FLOW AND THE RESULTING DECREASE IN TURBINE EFFICIENCY

    NASA Technical Reports Server (NTRS)

    Gauntner, J. W.

    1994-01-01

    This algorithm has been developed for calculating both the quantity of compressor bleed flow required to cool a turbine and the resulting decrease in efficiency due to cooling air injected into the gas stream. Because of the trend toward higher turbine inlet temperatures, it is important to accurately predict the required cooling flow. This program is intended for use with axial flow, air-breathing jet propulsion engines with a variety of airfoil cooling configurations. The algorithm results have compared extremely well with figures given by major engine manufacturers for given bulk metal temperatures and cooling configurations. The program calculates the required cooling flow and corresponding decrease in stage efficiency for each row of airfoils throughout the turbine. These values are combined with the thermodynamic efficiency of the uncooled turbine to predict the total bleed airflow required and the altered turbine efficiency. There are ten airfoil cooling configurations and the algorithm allows a different option for each row of cooled airfoils. Materials technology is incorporated and requires the date of the first year of service for the turbine stator vane and rotor blade. The user must specify pressure, temperatures, and gas flows into the turbine. This program is written in FORTRAN IV for batch execution and has been implemented on an IBM 3080 series computer with a central memory requirement of approximately 61K of 8 bit bytes. This program was developed in 1980.

  18. Wind turbine rotor

    SciTech Connect

    Baskin, J. M.; Miller, G. E.; Wiesner, W.

    1985-12-10

    A fixed pitch wind turbine rotor is teeter mounted onto a low speed input shaft which is connected to the input of a step-up transmission. The output of the transmission is connected to a rotary pole amplitude modulated induction machine which is operable as a generator at a plurality of discreet speeds of rotation and is also operable as a startup motor for the rotor. A switch responsive to the rotational speed of the wind turbine rotor switches the generator from one speed of operation to the other. The rotor hub and the inner body portions of two blades which extend radially outwardly in opposite directions from the hub, are constructed from steel. The outer end portions of the blade are constructed from a lighter material, such as wood, and are both thinner and narrower than the remainder of the rotor. The outer end section of each blade includes a main body portion and a trailing edge portion which is hinge-connected to the main body portion. Each blade includes a centrifugal force operated positioning means which normally holds the drag brake section in a retracted position, but operates in response to a predetermined magnitude of centrifugal force to move the drag brake section into its deployed position. Each blade has an airfoil cross section and each blade has a plus twist inner portion adjacent the hub changing to first a zero twist and then a minus twist as it extends radially outwardly from the hub.

  19. Towers for Offshore Wind Turbines

    NASA Astrophysics Data System (ADS)

    Kurian, V. J.; Narayanan, S. P.; Ganapathy, C.

    2010-06-01

    Increasing energy demand coupled with pollution free production of energy has found a viable solution in wind energy. Land based windmills have been utilized for power generation for more than two thousand years. In modern times wind generated power has become popular in many countries. Offshore wind turbines are being used in a number of countries to tap the energy from wind over the oceans and convert to electric energy. The advantages of offshore wind turbines as compared to land are that offshore winds flow at higher speed than onshore winds and the more available space. In some land based settings, for better efficiency, turbines are separated as much as 10 rotor diameters from each other. In offshore applications where only two wind directions are likely to predominate, the distances between the turbines arranged in a line can be shortened to as little as two or four rotor diameters. Today, more than a dozen offshore European wind facilities with turbine ratings of 450 kw to 3.6 MW exist offshore in very shallow waters of 5 to 12 m. Compared to onshore wind turbines, offshore wind turbines are bigger and the tower height in offshore are in the range of 60 to 80 m. The water depths in oceans where offshore turbines can be located are within 30 m. However as the distance from land increases, the costs of building and maintaining the turbines and transmitting the power back to shore also increase sharply. The objective of this paper is to review the parameters of design for the maximum efficiency of offshore wind turbines and to develop types offshore towers to support the wind turbines. The methodology of design of offshore towers to support the wind turbine would be given and the environmental loads for the design of the towers would be calculated for specific cases. The marine corrosion on the towers and the methods to control the corrosion also would be briefly presented. As the wind speeds tend to increase with distance from the shore, turbines build father

  20. Advanced Gas Turbine (AGT) Technology Project

    NASA Technical Reports Server (NTRS)

    1984-01-01

    Technical work on the design and effort leading to the testing of a 74.5 kW (100 hp) automotive gas turbine engine is reviewed. Development of the engine compressor, gasifier turbine, power turbine, combustor, regenerator, and secondary system is discussed. Ceramic materials development and the application of such materials in the gas turbine engine components is described.