Science.gov

Sample records for access port diameter

  1. Impact of access port diameter on the long reach manipulator design

    SciTech Connect

    Stoughton, R.S.

    1994-04-01

    Many of the single shell storage tanks (SSTs) on the Hanford site appear to have central 42-in. risers which could be used as access ports for the Long Reach Manipulator (LRM). However, about half of the tanks are known to not have a central 42-in. riser and it has recently been discovered that of the tanks whose drawings indicate central 42-in. risers, the majority have been plugged, sealed, or taper down to a much smaller diameter at ground level. Thus, it can be assumed that a central access port for the LRM will have to be made. There are many issues involved in determining the best diameter for this access port such as radiation exposure, contamination prevention, and availability of remote excavation technology. This report analyzes the relationship between the access port diameter and the performance characteristics of the LRM. Previous work has assumed that the mast diameter would be 80% of the access port diameter. In this report, the maximum mast diameter will be varied rather than the access port diameter, leaving the issue of the required clearance between the mast and the access port open.

  2. Single port access surgery with a novel Port Camera system.

    PubMed

    Terry, Benjamin S; Schoen, Jonathan; Mills, Zachary; Rentschler, Mark E

    2012-06-01

    In this work, the authors designed, built, and tested a novel port camera system for single port access (SPA) laparoscopic surgery. This SPA Port Camera device integrates the monitor, laparoscopic camera, and light source into an inexpensive, portable cannula port. The device uses a 2-channel SPA port inserted through an umbilical incision, similar to traditional SPA. After insertion into a channel, the device deploys a small camera module and LED lamp in vivo. An integrated, on-patient LCD provides the view of the surgical site. The design intent of the port camera is to enhance SPA by (a) reducing the size of the SPA port through the elimination of the dedicated laparoscope channel; (b) reducing equipment cost by integrating an inexpensive CMOS sensor and LED lamp at the port tip; (c) eliminating the need for an assistant who operates the laparoscope; and (d) mechanically coupling the camera, tool port, and on-patient LCD screen. The effectiveness of the device was evaluated by comparing the video performance with a leading industry laparoscope and by performing a user evaluation study and live porcine surgery with the device. Effectiveness of the device was mixed. Overall video system performance of the device is better than an industry standard high-definition laparoscope, implying that significant cost savings over a traditional system are possible. Participant study results suggest that simulated laparoscopic tasks are as efficient with the SPA Port Camera as they are with a typical SPA configuration. However, live surgery revealed several shortcomings of the SPA Port Camera.

  3. [Implantable venous access ports, nursing practices].

    PubMed

    Ourliac, Maryse; Dijols-Lécuyer, Isabelle

    2016-05-01

    Following the publication of national recommendations regarding the handling of implantable venous access ports, an observation audit was carried out in a hospital in 2013. This enabled an assessment of the existing system to be performed, current practices to be compared with the hospital's protocol and adapted corrective measures to be put in place. A further audit carried out in 2015 was particularly encouraging. PMID:27157553

  4. At 1050 Gallery, Block 16, view of access port down ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    At 1050 Gallery, Block 16, view of access port down to top of penstock (this is a service hatch into penstock for turbine-generator unit No. 2), looking north. - Columbia Basin Project, Grand Coulee Dam & Franklin D. Roosevelt Lake, Across Columbia River, Southeast of Town of Grand Coulee, Grand Coulee, Grant County, WA

  5. Effect of grain port length-diameter ratio on combustion performance in hybrid rocket motors

    NASA Astrophysics Data System (ADS)

    Cai, Guobiao; Zhang, Yuanjun; Tian, Hui; Wang, Pengfei; Yu, Nanjia

    2016-11-01

    The objectives of this study are to develop a more accurate regression rate considering the oxidizer mass flow and the fuel grain geometry configuration with numerical and experimental investigations in polyethylene (PE)/90% hydrogen peroxide (HP) hybrid rocket. Firstly, a 2-D axisymmetric CFD model with turbulence, chemistry reaction, solid-gas coupling is built to investigate the combustion chamber internal flow structure. Then a more accurate regression formula is proposed and the combustion efficiency changing with the length-diameter ratio is studied. A series experiments are conducted in various oxidizer mass flow to analyze combustion performance including the regression rate and combustion efficiency. The regression rates are measured by the fuel mass reducing and diameter changing. A new regression rate formula considering the fuel grain configuration is proposed in this paper. The combustion efficiency increases with the length-diameter ratio changing. To improve the performance of a hybrid rocket motor, the port length-diameter ratio is suggested 10-12 in the paper.

  6. 50 CFR 300.303 - Port access by foreign, listed IUU vessels.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Port access by foreign, listed IUU vessels... INTERNATIONAL FISHERIES REGULATIONS Vessels on IUU Vessel Lists § 300.303 Port access by foreign, listed IUU vessels. If a foreign, listed IUU vessel is allowed to enter a port or place subject to the...

  7. A suction lysimeter and a geophysical access port

    SciTech Connect

    Hubbell, J.M.; Sisson, J.B.

    1995-12-31

    A sampling apparatus is described for monitoring vadose zones, geologic media or buried waste in sediment and more particularly to such an apparatus which is operable as an access port for geophysical logging and collecting fluid samples to permit analysis of such fluid samples for the presence of toxic substances, having a pipe-like, stainless steel, longitudinally extending, access tube with two ends, where the first end extends above the surface of the sediment and has a removable air tight seal. The subject invention further has a backing in fluid communication with the access tube and a fluid permeable plate contiguous with the backing, wherein the fluid permeable plate is made up of porous stainless steel. A reservoir is integrated into the second closed end of the access tube for containing the collected fluid. A vacuum pump, having a vacuum gauge/transducer attached thereto, is connected to the removable air tight seal for applying a vacuum to the access tube, such that gas and fluid samples may be drawn through the fluid permeable plate. A fluid sample connector coupled to the removable air tight seal, in addition to the vacuum pump with vacuum gauge/transducer, for withdrawing a fluid sample from the access tube.

  8. Reduction of erosion risk in adult patients with implanted venous access ports.

    PubMed

    Burris, Jennifer; Weis, Mary

    2014-08-01

    One of the most common venous access devices used in patients with cancer is the implanted venous access port. Although incidences of infection and thrombosis are the most commonly reported complications, erosion rates of venous access ports are estimated at almost 1%. This article describes how evidence-based interdisciplinary interventions decreased port erosions for a regional health center from 3.2% to less than 1%.

  9. Port Access (Thru-Port System) video-assisted mitral valve surgery

    PubMed Central

    Chirichilli, Ilaria; D’Ascoli, Riccardo; Rose, David; Frati, Giacomo

    2013-01-01

    The aim of this review is to focus the attention on the “state of the art” of port-access and video-assisted mitral valve surgery appraising the results compared to the traditional approach, describing different technical strategies and analyzing how to avoid and manage its related complications concomitantly elucidating which procedure is associated with the most favorable risk-benefit and cost-benefit profile. Our default strategy is to use the minimally invasive approach combining video-assisted right mini-thoracotomy with endo-cardiopulmonary bypass and endo-aortic balloon occlusion (EBO) whenever possible. This choice is supported by the evidence that, after an initial learning curve, it is a safe and effective approach in terms of short- and long-term results, mainly for redo operations and even for elderly patients with moderately elevated peri-operative risk. PMID:24251028

  10. 76 FR 27287 - Port Access Route Study: In the Bering Strait; Extension of Comment Period

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-11

    ... of Study and request for comments for the Port Access Route Study: In the Bering Strait (75 FR 68568..., 2008, issue of the Federal Register (73 FR 3316). This notice is issued under authority of 33 U.S.C... SECURITY Coast Guard 33 CFR Part 167 Port Access Route Study: In the Bering Strait; Extension of...

  11. 76 FR 35805 - Port Access Route Study: The Approaches to San Francisco

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-20

    ... study in the Federal Register on December 10, 2009 (74 FR 65543), entitled ``Port Access Route Study... announced the notice of study in the Federal Register on December 10, 2009 (74 FR 65543), entitled ``Port..., 2008, issue of the Federal Register (73 FR 3316). FOR FURTHER INFORMATION CONTACT: If you...

  12. Venous Access Ports: Indications, Implantation Technique, Follow-Up, and Complications

    SciTech Connect

    Walser, Eric M.

    2012-08-15

    The subcutaneous venous access device (SVAD or 'port') is a critical component in the care of patients with chronic disease. The modern SVAD provides reliable access for blood withdrawal and medication administration with minimal disruption to a patient's lifestyle. Because of improved materials and catheter technology, today's ports are lighter and stronger and capable of high-pressure injections of contrast for cross-sectional imaging. The majority of SVAD placement occurs in interventional radiology departments due to their ability to provide this service at lower costs, lower, complication rates, and greater volumes. Port-insertion techniques vary depending on the operator, but all consist of catheter placement in the central venous circulation followed by subcutaneous pocket creation and port attachment to the catheter with fixation and closure of the pocket. Venous access challenges occasionally occur in patients with central vein occlusions, necessitating catheterization of collateral veins or port placement in alternate locations. Complications of SVADs include those associated with the procedure as well as short- (<30 days) and long-term problems. Procedural and early complications are quite rare due to the near-universal use of real-time ultrasound guidance for vein puncture, but they can include hematoma, catheter malposition, arrhythmias, and pneumothorax. Late problems include both thrombotic complications (native venous or port-catheter thrombosis) and infections (tunnel or pocket infections or catheter-associated bloodstream infections). Most guidelines suggest that 0.3 infections/1000 catheter days is an appropriate upper threshold for the insertion of SVADs.

  13. 33 CFR 125.15 - Access to waterfront facilities, and port and harbor areas, including vessels and harbor craft...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., and port and harbor areas, including vessels and harbor craft therein. 125.15 Section 125.15....15 Access to waterfront facilities, and port and harbor areas, including vessels and harbor craft....09 to those waterfront facilities, and port and harbor areas, including vessels and harbor...

  14. Fracture and migration of implantable venous access port catheters: Cause analysis and management of 4 cases.

    PubMed

    Xiao, Shu-ping; Xiong, Bin; Chu, Jun; Li, Xiao-fang; Yao, Qi; Zheng, Chuan-sheng

    2015-10-01

    This study aimed to investigate the causes and managements of the fractures and migrations of the implantable venous access port catheter (IVAPC). The fracture or migration of IVAPC occurred in 4 patients who were treated between May 2012 and January 2014 in Union Hospital, Wuhan, China. The port catheter leakage was found in 2 cases during drug infusion. Catheters that dislodged to the superior vena cava and right atrium were confirmed by port angiogram. The two dislodged catheters were successfully retrieved by interventional procedures. Catheter fracture occurred in two cases during port removal. One catheter was eventually removed from the subclavian vein through right clavicle osteotomy and subclavian venotomy, and the other removed by external jugular venotomy. Flushing the port in high pressure and injury of the totally implantable venous access port (TIVP) during implantation are usually responsible for catheter displacement. Interventional retrieval procedure can be used if the catheter dislodges to the vena cava and right atrium. Catheter fracture may occur during removal if clipping syndrome occurs or the catheter is sutured very tight during implantation. PMID:26489636

  15. Single-port-access surgery with a novel magnet camera system.

    PubMed

    Terry, Benjamin S; Mills, Zachary C; Schoen, Jonathan A; Rentschler, Mark E

    2012-04-01

    In this paper, we designed, built, and tested a novel single-port access laparoscopic surgery (SPA) specific camera system. This device (magnet camera) integrates a light source and video camera into a small, inexpensive, portable package that does not compete for space with the surgical tools during SPA. The device is inserted through a 26-mm incision in the umbilicus, followed by the SPA port, which is used to maintain an insufflation seal and support the insertion of additional tools. The camera, now in vivo, remains separate from the SPA port, thereby removing the need for a dedicated laparoscope, and, thus, allowing for an overall reduction in SPA port size or the use of a third tool through the insertion port regularly reserved for the traditional laparoscope. The SPA camera is mounted to the abdominal ceiling using one of the two methods: fixation to the SPA port through the use of a rigid ring and cantilever bar, or by an external magnetic handle. The purpose of the magnet camera system is to improve SPA by: 1) eliminating the laparoscope SPA channel; 2) increasing the field of view through enhanced camera system mobility; and 3) reducing interference between the camera system and the surgical tools at the port, both in vivo and ex vivo.

  16. 75 FR 56919 - Port Access Route Study: The Approaches to San Francisco

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-17

    ... and Purpose We published a notice of study in the Federal Register on December 10, 2009 (74 FR 65543... Federal Register (73 FR 3316). Information on Service for Individuals With Disabilities For information on... SECURITY Coast Guard 33 CFR Part 167 Port Access Route Study: The Approaches to San Francisco AGENCY:...

  17. Catheter fracture and embolization from totally implanted venous access ports--case reports.

    PubMed

    Vadlamani, P; Dawn, B; Perry, M C

    1998-12-01

    Totally implanted venous access ports are excellent devices for delivering chemotherapeutic agents and prolonged intravenous infusions in patients with cancer. Catheter fracture and embolization are rare and potentially serious complications of these widely used devices. Retrieval of the embolized fragment is generally indicated but may not be possible. The authors report three cases of catheter embolization in their center over a period of 9 years. Catheter "pinch-off," fracture, embolization, and retrieval are discussed. PMID:9855376

  18. Limitations of Closing Percutaneous Transthoracic Ventricular Access Ports Using a Commercial Collagen Vascular Closure Device

    PubMed Central

    Barbash, Israel M.; Saikus, Christina E.; Ratnayaka, Kanishka; Faranesh, Anthony Z.; Kocaturk, Ozgur; Wu, Vincent; Bell, Jamie A.; Schenke, William H.; Raman, Venkatesh K.; Lederman, Robert J.

    2011-01-01

    INTRODUCTION Closed-chest access and closure of direct cardiac punctures may enable a range of therapeutic procedures. We evaluate the safety and feasibility of closing percutaneous direct ventricular access sites using a commercial collagen-based femoral artery closure device. METHODS Yorkshire swine underwent percutaneous transthoracic left ventricular access (n=13). The access port was closed using a commercial collagen-based vascular closure device (Angio-Seal, St Jude Medical) with or without prior separation of the pericardial layers by instillation of fluid into the pericardial space (“permissive pericardial tamponade”). After initial nonsurvival feasibility experiments (n=6); animals underwent one-week (n=3) or six-week follow up (n=4). RESULTS In naïve animals, the collagen plug tended to deploy outside the parietal pericardium, where it failed to accomplish hemostasis. “Permissive pericardial tamponade” was created under MRI, and accomplished early hemostasis by allowing the collagen sponge to seat on the epicardial surface inside the pericardium. After successful closure, six of seven animals accumulated a large pericardial effusion 5±1 days after closure. Despite percutaneous drainage during 6-week follow-up, the large pericardial effusion recurred in half, and was lethal in one. CONCLUSIONS A commercial collagen based vascular closure device may achieve temporary but not durable hemostasis when closing a direct left ventricular puncture port, but only after intentional pericardial separation. These insights may contribute to development of a superior device solution. Elective clinical application of this device to close apical access ports should be avoided. PMID:21234923

  19. Femoral Placement of Totally Implantable Venous Access Ports in Patients with Bilateral Breast Cancer

    PubMed Central

    Almasi-Sperling, V.; Hieber, S.; Lermann, J.; Strahl, O.; Beckmann, M. W.; Lang, W.; Sagban, T. A.

    2016-01-01

    Purpose: Aim of this study was to determine the rate of complications following femoral placement of totally implantable venous access ports (f-TIVAP) in women with bilateral breast cancer, with a special focus on long-term function, deep vein thrombosis (DVT), and port infection. Methods: 73 patients with bilateral breast cancer treated between October 2000 and January 2013 with placement of an f-TIVAP using a transfemoral approach were retrospectively reviewed. All patients were followed up, and all complications of f-TIVAP were recorded. Results: The median age was 62.5 years (range: 35–86 years). Four patients received f-TIVAP under local anesthesia, and 69 underwent placement under general anesthesia. Mean follow-up was 33.7 months (SD 25.9; range: 0.2–93.5 months). Complications over the entire period of observation included infections in 21 %, DVT in 19 % and catheter occlusion in 12 %. Patients receiving chemotherapy who developed leukopenia were more likely to experience DVT at the access site (p = 0.037). There was a trend towards a higher infection rate when the device was used more often (p = 0.084). Conclusion: Although the rates of complications in the longer term, especially device infections and DVTs, appeared to be relatively high, TIVAP implantation using femoral vein access is recommended in patients with bilateral breast cancer not suitable for cephalic vein cut-down. PMID:26855441

  20. Preliminary application of a single-port access technique for laparoscopic ovariohysterectomy in dogs

    PubMed Central

    Sánchez-Margallo, F. M.; Tapia-Araya, A.; Díaz-Güemes, I.

    2015-01-01

    Laparoscopic ovariohysterectomy using single-portal access was performed in nine selected owned dogs admitted for elective ovariohysterectomy and the surgical technique and outcomes were detailed. A multiport device (SILS Port, Covidien, USA) was placed at the umbilical area through a single 3 cm incision. Three cannulae were introduced in the multiport device through the access channels and laparoscopic ovariohysterectomy was performed using a 5-mm sealing device, a 5-mm articulating grasper and a 5-mm 30° laparoscope. The mean total operative time was 52.66±15.20 minutes and the mean skin incision during surgery was 3.09±0.20 cm. Of the nine cases examined, in the one with an ovarian tumour, the technique was converted to multiport laparoscopy introducing an additional 5-mm trocar. No surgical complications were encountered and intraoperative blood loss was minimum in all animals. Clashing of the instruments and reduced triangulation were the main limitations of this technique. The combination of articulated and straight instruments facilitated triangulation towards the surgical field and dissection capability. One month after surgery a complete wound healing was observed in all animals. The present data showed that ovariohysterectomy performed with a single-port access is technically feasible in dogs. The unique abdominal incision minimises the abdominal trauma with good cosmetic results. PMID:26568831

  1. Implantable vascular access port-associated bloodstream infection caused by Rhizobium radiobacter: a case report.

    PubMed

    Karadağ-Öncel, Eda; Ozsürekci, Yasemin; Aytaç, Selin; Kara, Ateş; Cengiz, Ali Bülent; Ceyhan, Mehmet

    2013-01-01

    Rhizobium radiobacter is an uncommon opportunistic pathogen present in soil. It has been particularly associated with indwelling intravascular devices in immunocompromised patients. Reported herein is a case of R. radiobacter bloodstream infection associated with an implantable vascular access port, which was easily controlled with antimicrobial treatment and did not require removal of the intravascular device, in a child diagnosed with acute lymphoblastic leukemia. Also included is a review of the pertinent literature regarding the clinical presentation and management of R. radiobacter infections in the childhood period.

  2. A modified method using a two-port approach for accessing the hilar vasculature without transferring an endostapler from camera port to utility port during thoracoscopic right upper lobectomy.

    PubMed

    Jiao, W; Zhao, Y; Xuan, Y; Wang, M

    2015-02-01

    For thoracoscopic upper lobectomies, most cutting endostaplers must be inserted through the camera port when using a two-port approach. Access to the hilar vasculature through only the utility port remains a challenge. In this study, we describe a procedure to access the hilar vasculature without transferring the endostapler site during a thoracoscopic right upper lobectomy. A 2.5-cm utility anterior incision was made in the fourth intercostal space. The posterior mediastinal visceral pleura were dissected to expose the posterior portion of the right upper bronchus and the anterior trunk of the right pulmonary artery. The pleura over the right hilar vasculature were then peeled with an electrocoagulation hook. The anterior trunk of the right pulmonary artery was then transected with a cutting endostapler through the utility port firstly. This crucial maneuver allowed the endostapler access to the right upper lobe pulmonary vein. The hilar structures were then easily handled in turn. This novel technique was performed successfully in 32 patients, with no perioperative deaths. The average operation time was 120.6 min (range 75-180 min). This novel technique permits effective control of the hilar vessels through the utility port, enabling simple, safe, quick and effective resection.

  3. Long-term Outcome of Peripherally Implanted Venous Access Ports in the Forearm in Female Cancer Patients

    SciTech Connect

    Klösges, Laura Meyer, Carsten Boschewitz, Jack Andersson, Magnus; Rudlowski, Christian; Schild, Hans H.; Wilhelm, Kai

    2015-06-15

    PurposeThe aim of this retrospective study was to analyze the long-term outcome of peripherally implanted venous access ports in the forearm at our institution in a female patient collective.MethodsBetween June 2002 and May 2011, a total of 293 female patients with an underlying malignancy had 299 forearm ports implanted in our interventional radiology suite. The mean age of the cohort was 55 ± 12 years (range 26–81 years). The majority of women suffered from breast (59.5 %) or ovarian cancer (28.1 %). Complications were classified as infectious complications, thrombotic and nonthrombotic catheter dysfunction (dislocation of the catheter or port chamber, fracture with/without embolization or kinking of the catheter, port occlusion), and others.ResultsWe analyzed a total of 90,276 catheter days in 248 port systems (47 patients were lost to follow-up). The mean device service interval was 364 days per catheter (range 8–2,132, median 223 days, CI 311–415, SD 404). Sixty-seven early (≤30 days from implantation) or late complications (>30 days) occurred during the observation period (0.74/1,000 catheter days). Common complications were port infection (0.18/1,000 days), thrombotic dysfunction (0.12/1,000 days), and skin dehiscence (0.12/1,000 days). Nonthrombotic dysfunction occurred in a total of 21 cases (0.23/1,000 days) and seemed to cumulate on the venous catheter entry site on the distal upper arm.ConclusionPeripherally implanted venous access ports in the forearm are a safe alternative to chest or upper-arm ports in female oncology patients. Special attention should be paid to signs of skin dehiscence and nonthrombotic dysfunction, especially when used for long-term treatment.

  4. ANALYSIS OF STANDARD MULTI-PORT VS. SINGLE SITE ACCESS FOR LAPAROSCOPIC SKILLS TRAINING

    PubMed Central

    Cox, Daniel R; Zeng, Wenjing; Frisella, Margaret M; Brunt, L. Michael

    2015-01-01

    Introduction Single site access (SSA) laparoscopy is more challenging to perform than multi-port(MP) laparoscopy. We examined MP versus SSA skills training on laparoscopic performance in surgically naive individuals. Methods Forty end-of-1st year medical students were randomized into two groups. Both were trained on 4 basic laparoscopic drills (peg, rope, bean drop, pattern cutting) using a standard MP setup (Group 1) or SSA approach (Group 2). Time to proficiency and number of repetitions (reps) were recorded. Each group then crossed over to the alternate approach where the sequence was repeated. Data are mean ± SD and statistical analysis was with two-tailed, unpaired t-test. Results Total times to proficiency for the SSA and MP approaches was not significantly different between groups (Group 1 M-P 234.0 ± 114.9 min vs Group 2 SSA 216.4 ± 106.5 min, p=0.67). The MP-trained group took less time to reach proficiency on the standard MP setup than the SSA group on the SSA approach (119.1 ± 69.7 min vs 178.0 ± 93.4 min, p=0.058) with significantly fewer repetitions (77.6 ± 42.6 vs. 118.8 ± 54.3, p=0.027). The SSA-trained group took significantly less time to reach proficiency on the MP setup than the standard MP-trained group (38.4 ± 29.4 min vs. 119.1 ± 69.7 min; p=0.0013) requiring only a mean of 26.9 total repetitions. When the standard MP group crossed over to the SSA setup, they took significantly less time to reach proficiency with the SSA approach than the SSA-trained group (114.8 ± 50.5 min vs. 178.0 ± 93.4 min, p=0.026) but with more total repetitions than with the M-P approach (86.2 ± 35.2 vs 77.6 ± 42.6, p= NS). Conclusions Laparoscopic single site access skills training results in longer times and more repetitions to achieve proficiency than multi-port training, but the skills acquired transfer well to the multi-port approach. PMID:20872019

  5. Design and Coordination Kinematics of an Insertable Robotic Effectors Platform for Single-Port Access Surgery

    PubMed Central

    Ding, Jienan; Goldman, Roger E.; Xu, Kai; Allen, Peter K.; Fowler, Dennis L.

    2012-01-01

    Single port access surgery (SPAS) presents surgeons with added challenges that require new surgical tools and surgical assistance systems with unique capabilities. To address these challenges, we designed and constructed a new insertable robotic end-effectors platform (IREP) for SPAS. The IREP can be inserted through a Ø15 mm trocar into the abdomen and it uses 21 actuated joints for controlling two dexterous arms and a stereo-vision module. Each dexterous arm has a hybrid mechanical architecture comprised of a two-segment continuum robot, a parallelogram mechanism for improved dual-arm triangulation, and a distal wrist for improved dexterity during suturing. The IREP is unique because of the combination of continuum arms with active and passive segments with rigid parallel kinematics mechanisms. This paper presents the clinical motivation, design considerations, kinematics, statics, and mechanical design of the IREP. The kinematics of coordination between the parallelogram mechanisms and the continuum arms is presented using the pseudo-rigid-body model of the beam representing the passive segment of each snake arm. Kinematic and static simulations and preliminary experiment results are presented in support of our design choices. PMID:23963105

  6. Design and Coordination Kinematics of an Insertable Robotic Effectors Platform for Single-Port Access Surgery.

    PubMed

    Ding, Jienan; Goldman, Roger E; Xu, Kai; Allen, Peter K; Fowler, Dennis L; Simaan, Nabil

    2013-10-01

    Single port access surgery (SPAS) presents surgeons with added challenges that require new surgical tools and surgical assistance systems with unique capabilities. To address these challenges, we designed and constructed a new insertable robotic end-effectors platform (IREP) for SPAS. The IREP can be inserted through a Ø15 mm trocar into the abdomen and it uses 21 actuated joints for controlling two dexterous arms and a stereo-vision module. Each dexterous arm has a hybrid mechanical architecture comprised of a two-segment continuum robot, a parallelogram mechanism for improved dual-arm triangulation, and a distal wrist for improved dexterity during suturing. The IREP is unique because of the combination of continuum arms with active and passive segments with rigid parallel kinematics mechanisms. This paper presents the clinical motivation, design considerations, kinematics, statics, and mechanical design of the IREP. The kinematics of coordination between the parallelogram mechanisms and the continuum arms is presented using the pseudo-rigid-body model of the beam representing the passive segment of each snake arm. Kinematic and static simulations and preliminary experiment results are presented in support of our design choices.

  7. Long-term vascular access ports as a means of sedative administration in a rodent fMRI survival model.

    PubMed

    Hettinger, Patrick C; Li, Rupeng; Yan, Ji-Geng; Matloub, Hani S; Cho, Younghoon R; Pawela, Christopher P; Rowe, Daniel B; Hyde, James S

    2011-09-15

    The purpose of this study is to develop a rodent functional magnetic resonance imaging (fMRI) survival model with the use of heparin-coated vascular access devices. Such a model would ease the administration of sedative agents, reduce the number of animals required in survival experiments and eliminate animal-to-animal variability seen in previous designs. Seven male Sprague-Dawley rats underwent surgical placement of an MRI-compatible vascular access port, followed by implantable electrode placement on the right median nerve. Functional MRI during nerve stimulation and resting-state functional connectivity MRI (fcMRI) were performed at times 0, 2, 4, 8 and 12 weeks postoperatively using a 9.4T scanner. Anesthesia was maintained using intravenous dexmedetomidine and reversed using atipamezole. There were no fatalities or infectious complications during this study. All vascular access ports remained patent. Blood oxygen level dependent (BOLD) activation by electrical stimulation of the median nerve using implanted electrodes was seen within the forelimb sensory region (S1FL) for all animals at all time points. The number of activated voxels decreased at time points 4 and 8 weeks, returning to a normal level at 12 weeks, which is attributed to scar tissue formation and resolution around the embedded electrode. The applications of this experiment extend far beyond the scope of peripheral nerve experimentation. These vascular access ports can be applied to any survival MRI study requiring repeated medication administration, intravenous contrast, or blood sampling.

  8. Central Venous Access Ports Placed by Interventional Radiologists: Experience with 125 Consecutive Patients

    SciTech Connect

    Lorch, Heike; Zwaan, Martin; Kagel, Christiane; Weiss, Hans-Dieter

    2001-05-15

    Purpose: To assess safety and function of central venous port systems implanted percutaneously in the interventional radiology suite.Methods: One hundred and twenty-five consecutive ports in 123 patients were evaluated retrospectively. One hundred and twenty ports were implanted via the subclavian vein.Results: Technical success was 100%. Fourteen patients (11.2%) experienced immediate procedural complications, all minor (pneumothorax 1.6%). During follow-up (4-343 days, mean service period 97.8 days), nine complications occurred, six of which were major. These were three port infections which led to hospitalization and port removal, one chamber penetration through the skin, and two port occlusions. Port removal as a result of complications was performed in six patients. Altogether, 20 complications occurred within a total of 11,056 days of service, which means 1.8 events per 1000 days of service.Conclusion: Percutaneous implantation of central venous port systems is safe and easy to perform. Complication rates of this study compare favorably with those of other radiological and surgical series.

  9. Solar diameter/s/

    NASA Astrophysics Data System (ADS)

    Rosch, J.; Yerle, R.

    1983-01-01

    Two definitions are possible for the solar diameter: astrophysical, relating to a specific physical parameter, or observational, relating to a given quantity that is to be measured. Since only the latter is directly accessible, astrophysical definitions should be linked to these quantities. All current solar diameter programs refer to the point of the limb where the brightness gradient is maximum, or to a higher order approximation of the profile shape. Two such programs, the Pic-du-Midi experiment which uses fast scans of the limb to define the injection point after a correction for atmospheric blurring, and the SCLERA experiment, employing an algorithm to obviate this correction, are compared. The advantage of a fast scan is noted.

  10. Mortality, violence and access to care in two districts of Port-au-Prince, Haiti

    PubMed Central

    Ponsar, Frédérique; Ford, Nathan; Van Herp, Michel; Mancini, Silvia; Bachy, Catherine

    2009-01-01

    Background Towards the end of 2006 open conflict broke out between United Nations forces and armed militia in Port-au-Prince, Haiti. Fighting was most intense in the district of Cité Soleil. Methods A cross-sectional, random-sample survey among the conflict-affected populations living in Cité Soleil and Martissant was carried out over a 4-week period in 2006 using a semi-structured questionnaire to assess exposure to violence and access to health care. Household heads from 945 households (corresponding to 4,763 people) in Cité Soleil and 1,800 household (9,539 people) in Martissant provided information on household members. The average recall period was 579 days for Cité Soleil and 601 days for Martissant. Results In Cité Soleil 120 deaths (21 children) were reported (CMR 0.4 deaths/10,000 people/day; <5 MR 0.5 deaths/10,000/day) while in Martissant 165 deaths (8 children) were reported (CMR 0.3/10,000 people/day; <5 MR 0.2/10,000 people/day). Violence was reported as the main cause of adult mortality in both locations (mainly gunshot wounds) accounting for 29.2% of deaths in Cité Soleil and 23% of deaths in Martissant. 22.9% of families in Cité Soleil and 18.6% in Martissant reported at least one victim of violence. Destruction of property and belongings was common in both Cité Soleil (52.4% of families) and Martissant (14.9%). Access to health services was limited, with 11% (22/196) of victims of violence in Cité Soleil and 23% (49/212) in Martissant unable to access care due to insecurity or lack of money. Discussion Extrapolating to the total population of these two districts some 2,000 violent deaths occurred over the recall period. Among the survivors, violence had lasting effects in terms of physical and mental health and loss of property and possessions. PMID:19317910

  11. Effects of distraction on pain, fear, and distress during venous port access and venipuncture in children and adolescents with cancer.

    PubMed

    Windich-Biermeier, Andrea; Sjoberg, Isabelle; Dale, Juanita Conkin; Eshelman, Debra; Guzzetta, Cathie E

    2007-01-01

    This study evaluates the effect of self-selected distracters (ie, bubbles, I Spy: Super Challenger book, music table, virtual reality glasses, or handheld video games) on pain, fear, and distress in 50 children and adolescents with cancer, ages 5 to 18, with port access or venipuncture. Using an intervention-comparison group design, participants were randomized to the comparison group (n = 28) to receive standard care or intervention group (n = 22) to receive distraction plus standard care. All participants rated their pain and fear, parents rated participant fear, and the nurse rated participant fear and distress at 3 points in time: before, during, and after port access or venipuncture. Results show that self-reported pain and fear were significantly correlated (P = .01) within treatment groups but not significantly different between groups. Intervention participants demonstrated significantly less fear (P <.001) and distress (P = .03) as rated by the nurse and approached significantly less fear (P = .07) as rated by the parent. All intervention parents said the needlestick was better because of the distracter. The authors conclude that distraction has the potential to reduce fear and distress during port access and venipuncture.

  12. Intake port

    DOEpatents

    Mendler, Edward Charles

    2005-02-01

    The volumetric efficiency and power of internal combustion engines is improved with an intake port having an intake nozzle, a venturi, and a surge chamber. The venturi is located almost halfway upstream the intake port between the intake valves and the intake plenum enabling the venturi throat diameter to be exceptionally small for providing an exceptionally high ram velocity and an exceptionally long and in turn high efficiency diffuser flowing into the surge chamber. The intake port includes an exceptionally large surge chamber volume for blow down of the intake air into the working cylinder of the engine.

  13. MAINTAINING ACCESS TO AMERICA'S INTERMODAL PORTS/TECHNOLOGIES FOR DECONTAMINATION OF DREDGED SEDIMENT: NEW YORK/NEW JERSEY HARBOR

    SciTech Connect

    STERN,E.A.; JONES,K.; DONATO,K.; PAULING,J.D.; SONTAG,J.G.; CLESCERI,N.L.; MENSINGER,M.C.; WILDE,C.L.

    1998-05-01

    One of the greatest drivers for maintaining access to America's Intermodal ports and related infrastructure redevelopment efforts over the next several years will be the control and treatment of contaminated sediments dredged from the nation's waterways. More than 306 million cubic meters (m{sup 3}) (400 million cubic yards [cy]) of sediments are dredged annually from US waterways, and each year close to 46 million m{sup 3} (60 million cy) of this material is disposed of in the ocean (EPA 842-F-96-003). The need to protect the environment against undesirable effects from sediment dredging and disposal practices is gaining increased attention from the public and governmental agencies. Meeting this need is a challenging task not only from the standpoint of solving formidable scientific and engineering problems, but also, and more importantly, from the need to implement complex collaborations among the many different parties concerned with the problem. Some 40 years ago, C.P. Snow pointed out the problems involved in communicating between the two cultures of the sciences and the humanities (Snow, 1993). Today, it is necessary to extend Snow's concept to a multicultural realm with groups that include governmental, industrial, environmental, academic, and the general public communicating in different languages based on widely different fundamental assumptions. The handling of contaminated sediments in the Port of New York/New Jersey (Port) exemplifies this problem. This paper describes a multicultural team that has formed as the result of a Congressional mandate for the development of procedures suitable for the decontamination of sediments in the Port under the Water Resources Development Act (WRDA) of 1992 (Section 405C) and 1996 (Section 226).

  14. Vascular Access Port Implantation and Serial Blood Sampling in a Gottingen Minipig (Sus scrofa domestica) Model of Acute Radiation Injury

    PubMed Central

    Moroni, Maria; Coolbaugh, Thea V; Mitchell, Jennifer M; Lombardini, Eric; Moccia, Krinon D; Shelton, Larry J; Nagy, Vitaly; Whitnall, Mark H

    2011-01-01

    Threats of nuclear and other radiologic exposures have been increasing, but no countermeasure for acute radiation syndrome has been approved by regulatory authorities. Because of their similarity to humans in regard to physiology and anatomy, we are characterizing Gottingen minipigs as a model to aid the development of radiation countermeasures. Irradiated minipigs exhibit immunosuppression, severe thrombocytopenia, vascular leakage, and acute inflammation. These complications render serial acquisition of blood samples problematic. Vascular access ports (VAP) facilitate serial sampling, but their use often is complicated by infections and fibrin deposition. We demonstrate here the successful use of VAP for multiple blood samplings in irradiated minipigs. Device design and limited postoperative prophylactic antimicrobial therapy before irradiation were key to obtaining serial sampling, reducing swelling, and eliminating infection and skin necrosis at the implantation site. Modifications of previous protocols included the use of polydioxanone sutures instead of silk; eliminating chronic port access; single-use, sterile, antireflux prefilled syringes for flushing; strict aseptic weekly maintenance of the device, and acclimating animals to reduce stress. VAP remained functional in 19 of 20 irradiated animals for as long as 3 mo. The remaining VAP failed due to a small leak in the catheter, leading to clot formation. VAP-related sepsis occurred in 2 minipigs. Blood sampling did not cause detectable stress in nonanesthetized sham-irradiated animals, according to leukograms and clinical signs. PMID:21333166

  15. COMPARISON OF LAPAROSCOPIC SKILLS PERFORMANCE USING SINGLE-SITE ACCESS (SSA) DEVICES VS. AN INDEPENDENT-PORT SSA APPROACH

    PubMed Central

    Schill, Matthew R.; Varela, J. Esteban; Frisella, Margaret M.; Brunt, L. Michael

    2015-01-01

    Background We compared performance of validated laparoscopic tasks on four commercially available single site access (SSA) access devices (AD) versus an independent port (IP) SSA set-up. Methods A prospective, randomized comparison of laparoscopic skills performance on four AD (GelPOINT™, SILS™ Port, SSL Access System™, TriPort™) and one IP SSA set-up was conducted. Eighteen medical students (2nd–4th year), four surgical residents, and five attending surgeons were trained to proficiency in multi-port laparoscopy using four laparoscopic drills (peg transfer, bean drop, pattern cutting, extracorporeal suturing) in a laparoscopic trainer box. Drills were then performed in random order on each IP-SSA and AD-SSA set-up using straight laparoscopic instruments. Repetitions were timed and errors recorded. Data are mean ± SD, and statistical analysis was by two-way ANOVA with Tukey HSD post-hoc tests. Results Attending surgeons had significantly faster total task times than residents or students (p< 0.001), but the difference between residents and students was NS. Pair-wise comparisons revealed significantly faster total task times for the IP-SSA set-up compared to all four AD-SSA’s within the student group only (p<0.05). Total task times for residents and attending surgeons showed a similar profile, but the differences were NS. When data for the three groups was combined, the total task time was less for the IP-SSA set-up than for each of the four AD-SSA set-ups (p < 0.001). Similarly,, the IP-SSA set-up was significantly faster than 3 of 4 AD-SSA set-ups for peg transfer, 3 of 4 for pattern cutting, and 2 of 4 for suturing. No significant differences in error rates between IP-SSA and AD-SSA set-ups were detected. Conclusions When compared to an IP-SSA laparoscopic set-up, single site access devices are associated with longer task performance times in a trainer box model, independent of level of training. Task performance was similar across different SSA

  16. Bilateral salpingo-oophorectomy and adhesiolysis with single port access laparoscopy and use of diode laser in a BRCA carrier.

    PubMed

    Angioni, S; Pontis, A; Sorrentino, F; Nappi, L

    2015-01-01

    Herein the authors report the first case of prophylactic bilateral salpingo-ovariectomy (BSO) in single port access laparoscopy (SPAL) with use of diode laser in a patient with BRCA1 mutation. As fimbria could be considered the site of origin for many serous carcinomas in BRCA mutation carriers, many studies are carried out to evaluate the possibility of preventing ovarian carcinoma with BSO. SPAL is a development of endoscopic surgery which further reduces invasiveness of surgical procedures. Diode laser presents a recognized precision for tissue cutting and coagulation and its use could be highly advantageous in SPAL surgery and in particular in such situations avoiding fallopian tube histology distortion and consequently improve the prognosis of BRCA carriers.

  17. Peripherally Placed Totally Implantable Venous-access Port Systems of the Forearm: Clinical Experience in 763 Consecutive Patients

    SciTech Connect

    Goltz, Jan P. Scholl, Anne; Ritter, Christian O.; Wittenberg, Guenther; Hahn, Dietbert; Kickuth, Ralph

    2010-12-15

    The aim of this study is to evaluate the effectiveness and safety of percutaneously placed totally implantable venous-access ports (TIVAPs) of the forearm. Between January 2006 and October 2008, peripheral TIVAPs were implanted in 763 consecutive patients by ultrasound and fluoroscopic guidance. All catheters were implanted under local anesthesia and were tunneled subcutaneously. Indication, technical success, and complications were retrospectively analyzed according to Society of Interventional Radiology (SIR) criteria. Presence of antibiotic prophylaxis, periprocedurally administered drugs (e.g., sedation), and laboratory results at the time of implantation were analyzed. Maintenance during the service interval was evaluated. In total, 327,499 catheter-days were analyzed. Technical success rate was 99.3%. Reasons for initial failure of implantation were either unexpected thrombosis of the subclavian vein, expanding tumor mass of the mediastinum, or failure of peripheral venous access due to fragile vessels. Mean follow-up was 430 days. There were 115 complications observed (15.1%, 0.03 per 100 catheter-days), of which 33 (4.3%) were classified as early (within 30 days from implantation) and 82 (10.7%) as late. Catheter-related venous thrombosis was found in 65 (8.5%) of 763 (0.02 per 100 catheter-days) TIVAPs. Infections were observed in 41 (5.4%) of 763 (0.01 per 100 catheter-days) devices. Other complications observed included dislocation of the catheter tip (0.8%), occlusion (0.1%), or rupture (0.1%) of the port catheter. Dislocated catheters were corrected during a second interventional procedure. In conclusion, implantation of percutaneously placed peripheral TIVAPs shows a high technical success rate and low risk of early complications when ultrasound and fluoroscopic guidance are used. Late complications are observed three times as often as early complications.

  18. 75 FR 55709 - Port Access Route Study: In the Approaches to Los Angeles-Long Beach and in the Santa Barbara...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-14

    ... Rosa, and Santa Cruz Islands approaching the San Pedro Channel. This study will assess whether the... a notice of study in the Federal Register on April 7, 2010 (75 FR 17562), entitled ``Port Access... Federal Register (73 FR 3316). Information on Service for Individuals With Disabilities For information...

  19. 76 FR 76927 - Port Access Route Study: The Atlantic Coast From Maine to Florida

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-09

    ... they be located? (6) What are the pros and cons to the Coast Guard designating coastwise fairways or...'' column. If you do not have access to the internet, you may view the docket online by visiting the Docket... records notice regarding our public dockets in the January 17, 2008, issue of the Federal Register (73...

  20. Single port laparoscopic and open surgical accesses of chronic peritoneal dialysis in children: A single center experience over 12 years

    PubMed Central

    Bıçakcı, Ünal; Genç, Gürkan; Tander, Burak; Günaydın, Mithat; Demirel, Dilek; Özkaya, Ozan; Rızalar, Rıza; Arıtürk, Ender; Bernay, Ferit

    2016-01-01

    INTRODUCTION: The aim of this study was to evaluate patients with end stage renal failure (ESRD) who underwent chronic peritoneal dialysis (CPD). The clinical outcomes of laparoscopic and open placements of catheters were compared. MATERIALS AND METHODS: We reviewed 49 (18 male and 31 female) children with CPD according to age, sex, cause of ESRD, catheter insertion method, kt/V rate, complications, presence of peritonitis, catheter survival rate between January 2002 and February 2014. RESULTS: Thirty-three patients were with open placement and 16 patients were with laparoscopic placement. The rate of the peritonitis is significantly less in patients with laparoscopic access than open access (n = 4 vs n = 25) (P <0.01). Patients with peritonitis were younger than those who had no attack of peritonitis (10.95 ± 0.8 years vs 13.4 ± 0.85 years). According to the development of complications, significant difference has not been found between the open (n = 9) and laparoscopic (n = 3) approaches except the peritonitis. Catheter survival rate for the first year was 95%, and for five years was 87.5%. There was no difference between open and laparoscopic group according to catheter survival rate. The mean kt/V which indicates the effectiveness of peritoneal dialysis was mean 2.26 ± 0.08. No difference was found between laparoscopic and open methods according to kt/V. CONCLUSION: Laparoscopic placement of CPD results in lower peritonitis rate. Catheter survival rate was excellent in both groups. Single port laparoscopic access for CPD catheter insertion is an effective and safe method. PMID:27073310

  1. Single-port versus conventional multiport access prophylactic laparoscopic bilateral salpingo-oophorectomy in high-risk patients for ovarian cancer: a comparison of surgical outcomes

    PubMed Central

    Angioni, Stefano; Pontis, Alessandro; Sedda, Federica; Zampetoglou, Theodoros; Cela, Vito; Mereu, Liliana; Litta, Pietro

    2015-01-01

    Bilateral salpingo-oophorectomy (BSO) in carriers of BRCA1 and BRCA2 mutations is widely recommended as part of a risk-reduction strategy for ovarian or breast cancer due to an underlying genetic predisposition. BSO is also performed as a therapeutic intervention for patients with hormone-positive premenopausal breast cancer. BSO may be performed via a minimally invasive approach with the use of three to four 5 mm and/or 12 mm ports inserted through a skin incision. To further reduce the morbidity associated with the placement of multiple port sites and to improve cosmetic outcomes, single-port laparoscopy has been developed with a single access point from the umbilicus. The purpose of this study was to evaluate the surgical outcomes associated with reducing the risks of salpingo-oophorectomy performed in a single port, while comparing multiport laparoscopy in women with a high risk for ovarian cancer. Single-port laparoscopy–BSO is feasible and safe, with favorable surgical and cosmetic outcomes when compared to conventional laparoscopy. PMID:26170692

  2. Sustained attention in mice: expanding the translational utility of the SAT by incorporating the Michigan Controlled Access Response Port (MICARP).

    PubMed

    St Peters, Megan; Cherian, Ajeesh Koshy; Bradshaw, Marc; Sarter, Martin

    2011-12-01

    Advances in mouse genetic technology have spurred increasing interest in the development of cognitive tasks for mice. Here, we describe and discuss the modifications necessary to adapt a task for the assessment of sustained attention performance for use in mice, including for taxing the top-down control of such performance. The validity of the Sustained Attention Task (SAT), including the distractor version (dSAT), has previously been demonstrated in rats and humans. This task requires moveable or retractable operanda; insertion of operanda into the operant chambers cues animals to respond to a prior signal or non-signal event, reporting either a hit or a miss, or a correct rejection or false alarm, respectively. Retractable levers did not support sufficiently high and stable levels of performance in mice. Given the widespread use of static nose-poke devices for testing operant performance in mice, we therefore designed and fabricated a retractable nose-poke device. As this device extends into chambers, a hole for nose-poking is slowly opened and closed again as the device retracts (termed the "Michigan Controlled Access Response Port", MICARP). Results describe the effects of variation of signal duration and event rate, trial outcome and trial type probability, effects of mice deprivation levels, and the reliability of SAT and dSAT performance. Mice perform the SAT and dSAT at levels comparable to those observed in rats. This task will be of assistance in expanding the translational usefulness of the SAT and dSAT. PMID:21888929

  3. MAINTAINING ACCESS TO AMERICA'S INTERMODAL PORTS/TECHNOLOGIES FOR DECONTAMINATION OF DREDGED SEDIMENT: NEW YORK/NEW JERSEY HARBOR.

    SciTech Connect

    STERN,E.A.; JONES,K.; DONATO,K.; PAULING,J.D.; SONTAG,J.G.; CLESCERI,N.L.; MENSINGER,M.C.; WILDE,C.L.

    1998-05-01

    One of the greatest drivers for maintaining access to America's Intermodal ports and related infrastructure redevelopment efforts over the next several years will be the control and treatment of contaminated sediments dredged from our nation's waterways. More than 306 million cubic meters (m{sup 3}) (400 million cubic yards [cy]) of sediments are dredged annually from U.S. waterways, and each year close to 46 million m{sup 3} (60 million cy) of this material is disposed of in the ocean (EPA 842-F-96-003). The need to protect our environment against undesirable effects from sediment dredging and disposal practices is gaining increased attention from the public and governmental agencies. Meeting this need is a challenging task not only from the standpoint of solving formidable scientific and engineering problems, but also, and more importantly, from the need to implement complex collaborations among the many different parties concerned with the problem. Some 40 years ago, C.P. Snow pointed out the problems involved in communicating between the two cultures of the sciences and the humanities (Snow, 1993). Today, it is necessary to extend Snow's concept to a multicultural realm with groups that include governmental, industrial, environmental, academic, and the general public communicating in different languages based on widely different fundamental assumptions.

  4. 39% access time improvement, 11% energy reduction, 32 kbit 1-read/1-write 2-port static random-access memory using two-stage read boost and write-boost after read sensing scheme

    NASA Astrophysics Data System (ADS)

    Yamamoto, Yasue; Moriwaki, Shinichi; Kawasumi, Atsushi; Miyano, Shinji; Shinohara, Hirofumi

    2016-04-01

    We propose novel circuit techniques for 1 clock (1CLK) 1 read/1 write (1R/1W) 2-port static random-access memories (SRAMs) to improve read access time (tAC) and write margins at low voltages. Two-stage read boost (TSR-BST) and write word line boost (WWL-BST) after the read sensing schemes have been proposed. TSR-BST reduces the worst read bit line (RBL) delay by 61% and RBL amplitude by 10% at V DD = 0.5 V, which improves tAC by 39% and reduces energy dissipation by 11% at V DD = 0.55 V. WWL-BST after read sensing scheme improves minimum operating voltage (V min) by 140 mV. A 32 kbit 1CLK 1R/1W 2-port SRAM with TSR-BST and WWL-BST has been developed using a 40 nm CMOS.

  5. Quality of life and cosmetic result of single-port access endoscopic thyroidectomy via axillary approach in patients with papillary thyroid carcinoma

    PubMed Central

    Huang, Jian-kang; Ma, Ling; Song, Wen-hua; Lu, Bang-yu; Huang, Yu-bin; Dong, Hui-ming

    2016-01-01

    Background Endoscopic thyroidectomy for minimally invasive thyroid surgery has been widely applied in the past decade. The present study aimed to evaluate the effects of single-port access transaxillary totally endoscopic thyroidectomy on the postoperative outcomes and functional parameters, including quality of life and cosmetic result in patients with papillary thyroid carcinoma (PTC). Patients and methods Seventy-five patients with PTC who underwent endoscopic thyroidectomy via a single-port access transaxillary approach were included (experimental group). A total of 123 patients with PTC who were subjected to conventional open total thyroidectomy served as the control group. The health-related quality of life and cosmetic and satisfaction outcomes were assessed postoperatively. Results The mean operation time was significantly increased in the experimental group. The physiological functions and social functions in the two groups were remarkably augmented after 6 months of surgery. However, there was no significant difference in the scores of speech and taste between the two groups at the indicated time of 1 month and 6 months. In addition, the scores for appearance, satisfaction with appearance, role-physical, bodily pain, and general health in the experimental group were better than those in the control group at 1 month and 6 months after surgery. Conclusion The single-port access transaxillary totally endoscopic thyroidectomy is safe and feasible for the treatment of patients with PTC. The subjects who underwent this technique have a good perception of their general state of health and are likely to participate in social activities. It is worthy of being clinically used for patients with PTC. PMID:27445496

  6. VisPort: Web-Based Access to Community-Specific Visualization Functionality [Shedding New Light on Exploding Stars: Visualization for TeraScale Simulation of Neutrino-Driven Supernovae (Final Technical Report)

    SciTech Connect

    Baker, M Pauline

    2007-06-30

    The VisPort visualization portal is an experiment in providing Web-based access to visualization functionality from any place and at any time. VisPort adopts a service-oriented architecture to encapsulate visualization functionality and to support remote access. Users employ browser-based client applications to choose data and services, set parameters, and launch visualization jobs. Visualization products typically images or movies are viewed in the user's standard Web browser. VisPort emphasizes visualization solutions customized for specific application communities. Finally, VisPort relies heavily on XML, and introduces the notion of visualization informatics - the formalization and specialization of information related to the process and products of visualization.

  7. Development of the SAIT single-port surgical access robot--slave arm based on RCM mechanism.

    PubMed

    Roh, Se-gon; Lee, Younbaek; Lee, Jongwon; Ha, Taesin; Sang, Taejun; Moon, Kyung-Won; Lee, Minhyong; Choi, Jung-yun

    2015-01-01

    An innovative single-port surgical robot has recently been developed by the Samsung Advanced Institute of Technology (SAIT). The robot can reach various surgical sites inside the abdominal cavity from a single incision on the body. It has two 7-DOF surgical tools, a 3-DOF endoscope, a flexible hyper-redundant 6-DOF guide tube, and a 6-DOF manipulator. This paper primarily focuses on the manipulator, called a slave arm, which is capable of setting the location of a Remote Center Motion (RCM) point. Because the surgical tools can explore the abdominal area through a small incision point when the RCM point is aligned with the incision area, the RCM mechanism is an integral part of the manipulator for single-port surgery. The mechanical feature, operational principle, control method, and the system architecture of the slave arm are introduced in this paper. In addition, manipulation experiments conducted validate its efficacy.

  8. Development of the SAIT single-port surgical access robot--slave arm based on RCM mechanism.

    PubMed

    Roh, Se-gon; Lee, Younbaek; Lee, Jongwon; Ha, Taesin; Sang, Taejun; Moon, Kyung-Won; Lee, Minhyong; Choi, Jung-yun

    2015-01-01

    An innovative single-port surgical robot has recently been developed by the Samsung Advanced Institute of Technology (SAIT). The robot can reach various surgical sites inside the abdominal cavity from a single incision on the body. It has two 7-DOF surgical tools, a 3-DOF endoscope, a flexible hyper-redundant 6-DOF guide tube, and a 6-DOF manipulator. This paper primarily focuses on the manipulator, called a slave arm, which is capable of setting the location of a Remote Center Motion (RCM) point. Because the surgical tools can explore the abdominal area through a small incision point when the RCM point is aligned with the incision area, the RCM mechanism is an integral part of the manipulator for single-port surgery. The mechanical feature, operational principle, control method, and the system architecture of the slave arm are introduced in this paper. In addition, manipulation experiments conducted validate its efficacy. PMID:26737484

  9. PORT II

    NASA Technical Reports Server (NTRS)

    Muniz, Beau

    2009-01-01

    One unique project that the Prototype lab worked on was PORT I (Post-landing Orion Recovery Test). PORT is designed to test and develop the system and components needed to recover the Orion capsule once it splashes down in the ocean. PORT II is designated as a follow up to PORT I that will utilize a mock up pressure vessel that is spatially compar able to the final Orion capsule.

  10. Mortality, crime and access to basic needs before and after the Haiti earthquake: a random survey of Port-au-Prince households.

    PubMed

    Kolbe, Athena R; Hutson, Royce A; Shannon, Harry; Trzcinski, Eileen; Miles, Bart; Levitz, Naomi; Puccio, Marie; James, Leah; Noel, Jean Roger; Muggah, Robert

    2010-01-01

    On 12 January 2010 an earthquake measuring 7.0 on the Richter Scale struck Haiti, causing unprecedented death, injury and destruction for an event of this magnitude. Our aim was to generate a rapid assessment of the primary consequences for the population of the metropolitan area of Port-au-Prince, the national capital. During the summer of 2009 we conducted a survey of 1,800 households in metropolitan Port-au-Prince. Six weeks after the earthquake, we attempted to trace these households in order to re-interview them. The questionnaire examined mortality and injuries generated by the natural disaster, as well as the character of victimization, food security and living arrangements following the quake. Data analysis incorporated sampling weights and adjusted for clustering within households. The original 2009 survey featured a 90 per cent response rate; in 2010 we re-interviewed 93 per cent of these households. We estimate that 158,679 people in Port-au-Prince (95 per cent CI 136,813-180,545) died during the quake or in the six-week period afterwards owing to injuries or illness. Children were at particular risk for death. In the six weeks after the earthquake, 10,813 people (95 per cent CI 6,726-14,900) were sexually assaulted, the vast majority of whom were female. In the same period 4,645 individuals (95 per cent CI 1,943-7,347) were physically assaulted. Of all households, 18.6 per cent (95 per cent CI 16.6-20.8) were experiencing severe food insecurity six weeks after the earthquake. 24.4 per cent (95 per cent CI 22.1-26.9) of respondents' homes were completely destroyed. Many residents of Port-au-Prince died during or as a result of the earthquake, albeit fewer than were widely reported. More than half of the capital's population experienced moderate to severe food insecurity, though remittances are a major protective factor in promoting food security. Survivors continue to experience high levels of sexual assault and limited access to durable shelter.

  11. Central venous catheters - ports

    MedlinePlus

    Central venous catheter - subcutaneous; Port-a-Cath; InfusaPort; PasPort; Subclavian port; Medi - port; Central venous line - port ... Catheters are used when you need medical treatment over a long period of time. For example, you ...

  12. Use of Universal 16S rRNA Gene PCR as a Diagnostic Tool for Venous Access Port-Related Bloodstream Infections

    PubMed Central

    Marín, M.; Martín-Rabadán, P.; Echenagusia, A.; Camúñez, F.; Rodríguez-Rosales, G.; Simó, G.; Echenagusia, M.; Bouza, E.

    2013-01-01

    Amplification of the universal 16S rRNA gene using PCR has improved the diagnostic yield of microbiological samples. However, no data have been reported on the reliability of this technique with venous access ports (VAPs). We assessed the utility of 16S rRNA PCR for the prediction of VAP-related bloodstream infection (VAP-RBSI). During a 2-year period, we prospectively received all VAPs removed by interventional radiologists. PCR and conventional cultures were performed using samples from the different VAP sites. We compared the results of PCR with those of conventional culture for patients with confirmed VAP-RBSI. We collected 219 VAPs from 219 patients. Conventional VAP culture revealed 15 episodes of VAP-RBSI. PCR revealed a further 4 episodes in patients undergoing antibiotic therapy which would have gone undetected using conventional culture. Moreover, it had a negative predictive value of 97.8% for the prediction of VAP-RBSI when it was performed using biofilm from the internal surface of the port. In conclusion, universal 16S rRNA PCR performed with samples from the inside of VAPs proved to be a useful tool for the diagnosis of VAP-RBSI. It increased detection of VAP-RBSI episodes by 21.1% in patients undergoing antibiotic therapy whose episodes would have gone undetected using conventional culture. Therefore, we propose a new application of 16S rRNA PCR as a useful tool for the diagnosis of VAP-RBSI in patients receiving antibiotic therapy. PMID:23254136

  13. Port wine.

    PubMed

    Moreira, N; Guedes de Pinho, P

    2011-01-01

    Port wine is a fortified wine with its origin in the Douro Demarcated Region but also includes Oporto city and the Entreposto of Gaia. Soil, climate, and viticultural conditions are important parameters used to classify and select the best vineyards to produce port wine. Taking into account the winemaking process, two major groups of wines can be distinguished: The wood ports and the bottle-aged ports. These distinct conditions and processes ensure that there is not an unique port wine but, several ports, whose colors range from white to deep purple and that present a wide variety of flavors: vintage, late-bottled vintage, crusted, indication of age, colheita, reserve, white, tawny, ruby, and rosé. PMID:21867894

  14. Port wine.

    PubMed

    Moreira, N; Guedes de Pinho, P

    2011-01-01

    Port wine is a fortified wine with its origin in the Douro Demarcated Region but also includes Oporto city and the Entreposto of Gaia. Soil, climate, and viticultural conditions are important parameters used to classify and select the best vineyards to produce port wine. Taking into account the winemaking process, two major groups of wines can be distinguished: The wood ports and the bottle-aged ports. These distinct conditions and processes ensure that there is not an unique port wine but, several ports, whose colors range from white to deep purple and that present a wide variety of flavors: vintage, late-bottled vintage, crusted, indication of age, colheita, reserve, white, tawny, ruby, and rosé.

  15. ITER Port Interspace Pressure Calculations

    SciTech Connect

    Carbajo, Juan J; Van Hove, Walter A

    2016-01-01

    The ITER Vacuum Vessel (VV) is equipped with 54 access ports. Each of these ports has an opening in the bioshield that communicates with a dedicated port cell. During Tokamak operation, the bioshield opening must be closed with a concrete plug to shield the radiation coming from the plasma. This port plug separates the port cell into a Port Interspace (between VV closure lid and Port Plug) on the inner side and the Port Cell on the outer side. This paper presents calculations of pressures and temperatures in the ITER (Ref. 1) Port Interspace after a double-ended guillotine break (DEGB) of a pipe of the Tokamak Cooling Water System (TCWS) with high temperature water. It is assumed that this DEGB occurs during the worst possible conditions, which are during water baking operation, with water at a temperature of 523 K (250 C) and at a pressure of 4.4 MPa. These conditions are more severe than during normal Tokamak operation, with the water at 398 K (125 C) and 2 MPa. Two computer codes are employed in these calculations: RELAP5-3D Version 4.2.1 (Ref. 2) to calculate the blowdown releases from the pipe break, and MELCOR, Version 1.8.6 (Ref. 3) to calculate the pressures and temperatures in the Port Interspace. A sensitivity study has been performed to optimize some flow areas.

  16. Sustained attention in mice: expanding the translational utility of the SAT by incorporating the Michigan Controlled Access Response Port (MICARP)

    PubMed Central

    St. Peters, Megan; Cherian, Ajeesh Koshy; Bradshaw, Marc; Sarter, Martin

    2011-01-01

    Advances in mouse genetic technology have spurred increasing interest in the development of cognitive tasks for mice. Here, we describe and discuss the modifications necessary to adapt a task for the assessment of sustained attention performance for use in mice, including for taxing the top-down control of such performance. The validity of the Sustained Attention Task (SAT), including the distractor version (dSAT), have previously been demonstrated in rats and humans. This task requires moveable or retractable operanda; insertion of operanda into the operant chambers cues animals to respond to a prior signal or non-signal event, reporting either a hit or a miss, or a correct rejection or false alarm, respectively. Retractable levers did not support sufficiently high and stable levels of performance in mice. Given the widespread use of static nose-poke devices for testing operant performance in mice, we therefore designed and fabricated a retractable nose-poke device. As this device extends into chambers, a hole for nose-poking is slowly opened and closed again as the device retracts (termed the “Michigan Controlled Access Response Port”; MICARP). Results describe the effects of variation of signal duration and event rate, trial outcome and trial type probability, effects of mice deprivation levels, and the reliability of SAT and dSAT performance. Mice perform the SAT and dSAT at levels comparable to those observed in rats. This task will be of assistance in expanding the translational usefulness of the SAT and dSAT. PMID:21888929

  17. 76 FR 67395 - Port Access Route Study: In the Approaches to Los Angeles-Long Beach and in the Santa Barbara...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-01

    .... Definitions: The following definitions should help the reader to understand terms used throughout this... published a notice of study in the Federal Register on April 7, 2010 (75 FR 17562), entitled ``Port...

  18. Microwave powered sterile access port

    NASA Technical Reports Server (NTRS)

    Sauer, Richard L. (Inventor); Atwater, James E. (Inventor); Dahl, Roger W. (Inventor); Garmon, Frank C. (Inventor); Lunsford, Teddie D. (Inventor); Michalek, William F. (Inventor); Wheeler, Jr., Richard R. (Inventor)

    2000-01-01

    A device and method for elimination of contamination during transfer of materials either into or from bioreactors, food containers, or other microbially vulnerable systems. Using microwave power, thermal sterilizations of mating fixtures are achieved simply, reliably, and quickly by the volatilization of small quantities of water to produce superheated steam which contacts all exposed surfaces.

  19. Multi-port dump combustor

    SciTech Connect

    Dale, L. A.; Grenleski Jr., S. E.; Keirsey, J. L.; Stevens, C. E.

    1985-09-10

    A four-ported dump combustor is designed for use with a ramjet engine and provides high combustion efficiency and pressure recovery for length-to-diameter (L/D) ratios of between 1.3 and 4.4, over a range of operating conditions.

  20. Reducing the diameters of computer networks

    NASA Technical Reports Server (NTRS)

    Bokhari, S. H.; Raza, A. D.

    1986-01-01

    Three methods of reducing the diameters of computer networks by adding additional processor to processor links under the constraint that no more than one I/O port be added to each processor are discussed. This is equivalent to adding edges to a given graph under the constraint that the degree of any node be increased, at most, by one.

  1. Rock Port Celebrates New Technology Center.

    ERIC Educational Resources Information Center

    Grones, Freda

    1997-01-01

    Discusses the advantages dome architecture gave to a new school technology center in Rock Port, Missouri. Advantages cover energy cost savings, lighting, storage space, aesthetics, accessibility, and convenience. (GR)

  2. Port-Wine Stain

    MedlinePlus

    ... and rashes clinical tools newsletter | contact Share | Port-Wine Stain A parent's guide for infants and babies ... a three-month-old infant with a port-wine stain. Overview A port-wine stain is a ...

  3. Single port VATS: recent developments in Asia

    PubMed Central

    Yu, Peter S.Y.; Capili, Freddie

    2016-01-01

    Single port video-assisted thoracic surgery (VATS) is the most recent evolution in minimally invasive thoracic surgery. With increasing global popularity, the single port VATS approach has been adopted by experienced thoracic surgeons in many Asian countries. From initial experience of single port VATS lobectomy to the more complex sleeve resection procedures now forming part of daily practice in some Asia institutes, the region has been the proving ground for single port VATS approaches’ feasibility and safety. In addition, certain technical refinements in single port VATS lung resection and lymph node dissection have also sprung from Asia. Novel equipment designed to facilitate single port VATS allowing further reduce access trauma are being realized by the partnership between surgeons and the industries. Advanced thoracoscopes and staplers that are narrower and more maneuverable are particularly important in the smaller habitus of patients from Asia. These and similar new generation equipment are being applied to single port VATS in novel ways. As dedicated thoracic surgeons in the region continue to striving for excellence, innovative ideas in single incision access including subxiphoid and embryonic natural-orifice transluminal endoscopic surgery (e-NOTES) have been explored. Adjunct techniques and technology used in association with single port VATS such as non-intubated surgery, hybrid operating room image guidance and electromagnetic navigational bronchoscopy are all in rapid development in Asia. PMID:27014478

  4. Tools for Inspecting and Sampling Waste in Underground Radioactive Storage Tanks with Small Access Riser Openings

    SciTech Connect

    Nance, T.A.

    1998-12-17

    Underground storage tanks with 2 inches to 3 inches diameter access ports at the Department of Energy's Savannah River Site have been used to store radioactive solvents and sludge. In order to close these tanks, the contents of the tanks need to first be quantified in terms of volume and chemical and radioactive characteristics. To provide information on the volume of waste contained within the tanks, a small remote inspection system was needed. This inspection system was designed to provide lighting and provide pan and tilt capabilities in an inexpensive package with zoom abilities and color video. This system also needed to be utilized inside of a plastic tent built over the access port to contain any contamination exiting from the port. This system had to be build to travel into the small port opening, through the riser pipe, into the tank evacuated space, and out of the riser pipe and access port with no possibility of being caught and blocking the access riser. Long thin plates were found in many access riser pipes that blocked the inspection system from penetrating into the tank interiors. Retrieval tools to clear the plates from the tanks using developed sampling devices while providing safe containment for the samples. This paper will discuss the inspection systems, tools for clearing access pipes, and solvent sampling tools developed to evaluate the tank contents of the underground solvent storage tanks.

  5. A surgical glove port technique for laparoscopic-assisted ovariohysterectomy for pyometra in the bitch.

    PubMed

    Becher-Deichsel, Anja; Aurich, Jörg E; Schrammel, Nadine; Dupré, Gilles

    2016-07-15

    The objective of the study was to describe the feasibility of a glove port technique for laparoscopic-assisted surgical treatment of canine pyometra. In this retrospective case series, a total of 10 female dogs (median age 7 years, range 5.5-10.5 years; median weight 37.0 kg, range 12.9-64.0 kg) with pyometra were included. A multiaccess port was created from a surgical glove attached to an Alexis wound retractor and placed in the ventral midline between the middle and caudal third of the distance between umbilicus and pubic rim. A vessel sealing device was used for transection of the ovarian pedicle. The port size was selected on the basis of maximum uterine diameter determined by ultrasound. Median incision length was 5.0 cm (range 3.1-7.7 cm) for a maximum uterine diameter of 4.0 cm (range 2.0-7.0 cm). Median surgical time was 57 minutes (range 48-65 minutes). No case had to be converted to open celiotomy. Complications included one case of minor, self-limiting splenic trauma by the endoscope. In eight dogs, the distended uterine horns endangered safe access to the ovarian pedicle, and the vessel sealing device was inserted through a second cannula placed periumbilically. Extension of the original incision was necessary to exteriorize organs in two dogs. All dogs recovered quickly and were discharged either on the day of surgery or 1 day thereafter. In conclusion, a surgical glove port technique in combination with an Alexis wound retractor is feasible for surgical laparoscopic treatment of canine pyometra up to a diameter of 7 cm. PMID:27039076

  6. Interpreting stem diameter changes

    NASA Astrophysics Data System (ADS)

    Hölttä, T.; Sevanto, S.; Nikinmaa, E.

    2009-12-01

    Detecting phloem transport in stem diameter changes Teemu Hölttä1, Sanna Sevanto2, Eero Nikinmaa1 1Department of Forest Ecology, P.O. Box 27, FIN-00014 University of Helsinki, Finland 2Department of Physics, P.O. Box 48, FIN-00014 University of Helsinki, Finland Introduction The volume of living cells and xylem conduits vary according to pressures they are subjected to. Our proposition is that the behavior of the inner bark diameter variation which cannot be explained by changes in xylem water status arise from changes in the osmotic concentration of the phloem and cambial growth. Materials and methods Simultaneous xylem and stem diameter measurements were conducted between June 28th to October 4th 2006 in Southern Finland on a 47-year old, 15 meter tall, Scots pine tree (DBH 15 cm) at heights of 1.5 and 10 meters. The difference between the measured inner bark diameter and the inner bark diameter predicted from xylem diameter change with a simple model (assuming there was no change in the osmotic concentration of the phloem) is hypothesized to give the changes in the osmotic concentration of the inner bark. The simple model calculates the radial water exchange between the xylem and phloem driven by the water potential changes in the xylem. Results and Discussion The major signal in the inner bark diameter was the transpiration rate as assumed, but also a signal arising from the change in the osmotic concentration (Fig 1a). The predicted osmotic concentration of the phloem typically increased during the afternoon due to the loading of photosynthesized sugars to the phloem. Inner bark osmotic concentration followed the photosynthesis rate with a 3 and 4 hour time-lag at the top and base, respectively (Fig 1b). The connection between photosynthesis and the predicted change in phloem osmotic concentration was stronger in the upper part of the tree compared to lower part. The changes in the predicted osmotic concentration were not similar every day, indicating that

  7. Tsunami currents in ports.

    PubMed

    Borrero, Jose C; Lynett, Patrick J; Kalligeris, Nikos

    2015-10-28

    Tsunami-induced currents present an obvious hazard to maritime activities and ports in particular. The historical record is replete with accounts from ship captains and harbour masters describing their fateful encounters with currents and surges caused by these destructive waves. Despite the well-known hazard, only since the trans-oceanic tsunamis of the early twenty-first century (2004, 2010 and 2011) have coastal and port engineering practitioners begun to develop port-specific warning and response products that accurately assess the effects of tsunami-induced currents in addition to overland flooding and inundation. The hazard from strong currents induced by far-field tsunami remains an underappreciated risk in the port and maritime community. In this paper, we will discuss the history of tsunami current observations in ports, look into the current state of the art in port tsunami hazard assessment and discuss future research trends.

  8. Tsunami currents in ports.

    PubMed

    Borrero, Jose C; Lynett, Patrick J; Kalligeris, Nikos

    2015-10-28

    Tsunami-induced currents present an obvious hazard to maritime activities and ports in particular. The historical record is replete with accounts from ship captains and harbour masters describing their fateful encounters with currents and surges caused by these destructive waves. Despite the well-known hazard, only since the trans-oceanic tsunamis of the early twenty-first century (2004, 2010 and 2011) have coastal and port engineering practitioners begun to develop port-specific warning and response products that accurately assess the effects of tsunami-induced currents in addition to overland flooding and inundation. The hazard from strong currents induced by far-field tsunami remains an underappreciated risk in the port and maritime community. In this paper, we will discuss the history of tsunami current observations in ports, look into the current state of the art in port tsunami hazard assessment and discuss future research trends. PMID:26392622

  9. PORTS MINIMIZATION WITH MINI-PORT AND LIVER FLEXIBLE RETRACTOR: AN ERGONOMIC AND AESTHETIC ALTERNATIVE FOR SINGLE PORT IN LAPAROSCOPIC GASTRIC BYPASS

    PubMed Central

    de MOURA-JÚNIOR, Luiz Gonzaga; de CASTRO-FILHO, Heládio Feitosa; MACHADO, Francisco Heine Ferreira; BABADOPULOS, Rodrigo Feitosa; FEIJÓ, Francisca das Chagas; FERNANDES, Silvana Duarte

    2014-01-01

    Background The laparoscopic access, with its classically known benefits, pushed implementation in other components, better ergonomy and aesthetic aspect. Aim To minimize the number and diameter of traditional portals using miniport and flexible liver retractor on bariatric surgery. Method This prospective study was used in patients with less than 45 kg/m2, with peripheral fat, normal umbilicus implantation, without previous abdominoplasties. Were used one 30o optical device with 5 mm in diameter, four accesses (one mini of 3 mm to the left hand of the surgeon, one of 5 mm to the right hand alternating with optics, one of 12 mm for umbilical for surgical maneuvers as dissection, clipping, in/out of gauze, and one portal of 5 mm for the assistant surgeon), resulting in a total of 25 mm linear incision; additionally, one flexible liver retractor (covered with a nelaton probe to protect the liver parenchyma, anchored in the right diaphragmatic pillar and going out through the surgeon left portal) to visualize the esophagogastric angle. Results In selected patients (48 operations), gastric bypass was performed at a similar time to the procedures with larger diameters (5 or 6 portals and 10 mm optics, with sum of linear incision of 42 mm) including oversuture line on excluded stomach, gastric tube and mesenteric closing. The non sutured portal of 3 mm and the two of 5 mm with subdermal sutures, were hardly visible in the folds of the skin; the one of 12 mm was buried inside the umbilicus or in the abdominoplasty incision. Conclusion Minimizing portals is safe, effective, good ergonomic alternative with satisfactory aesthetic profile without need for specific instruments, new learning curve and limited movement of the instruments, as required by the single port. PMID:25409973

  10. 33 CFR 165.778 - Security Zone; Port of Mayaguez, Puerto Rico.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Security Zone; Port of Mayaguez... SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS AREAS... Security Zone; Port of Mayaguez, Puerto Rico. (a) Security zone. A moving and fixed security zone...

  11. 33 CFR 165.711 - Safety Zone: Port Everglades, Fort Lauderdale, FL.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Safety Zone: Port Everglades... HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS....711 Safety Zone: Port Everglades, Fort Lauderdale, FL. (a) Regulated area. A moving safety zone...

  12. 33 CFR 165.1701 - Port Valdez, Valdez, Alaska-safety zone.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Port Valdez, Valdez, Alaska... HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS... § 165.1701 Port Valdez, Valdez, Alaska—safety zone. The waters within the following boundaries are...

  13. PORT: A Testbed Paradigm for On-line Digital Archive Development.

    ERIC Educational Resources Information Center

    Keeler, Mary; Kloesel, Christian

    1997-01-01

    Discusses the Peirce On-line Resource Testbed (PORT), a digital archive of primary data. Highlights include knowledge processing testbeds for digital resource development; Peirce's pragmatism in operation; PORT and knowledge processing; obstacles to archive access; and PORT as a paradigm for critical control in knowledge processing. (AEF)

  14. Simulation model for port shunting yards

    NASA Astrophysics Data System (ADS)

    Rusca, A.; Popa, M.; Rosca, E.; Rosca, M.; Dragu, V.; Rusca, F.

    2016-08-01

    Sea ports are important nodes in the supply chain, joining two high capacity transport modes: rail and maritime transport. The huge cargo flows transiting port requires high capacity construction and installation such as berths, large capacity cranes, respectively shunting yards. However, the port shunting yards specificity raises several problems such as: limited access since these are terminus stations for rail network, the in-output of large transit flows of cargo relatively to the scarcity of the departure/arrival of a ship, as well as limited land availability for implementing solutions to serve these flows. It is necessary to identify technological solutions that lead to an answer to these problems. The paper proposed a simulation model developed with ARENA computer simulation software suitable for shunting yards which serve sea ports with access to the rail network. Are investigates the principal aspects of shunting yards and adequate measures to increase their transit capacity. The operation capacity for shunting yards sub-system is assessed taking in consideration the required operating standards and the measure of performance (e.g. waiting time for freight wagons, number of railway line in station, storage area, etc.) of the railway station are computed. The conclusion and results, drawn from simulation, help transports and logistics specialists to test the proposals for improving the port management.

  15. Port-wine stain

    MedlinePlus

    Many treatments have been tried for port-wine stains, including freezing, surgery, radiation, and tattooing. Laser therapy is most successful in eliminating port-wine stains. It is the only method that can destroy the tiny blood vessels in the skin ...

  16. Glove port retrofit assembly and method of replacing components

    DOEpatents

    Giesen, Isaac M; Cournoyer, Michael E; Rael, David G

    2014-11-18

    What is disclosed is a system for retrofitting a sealed enclosure for performing work therein having an outer enclosure assembly configured to be clamped to the outer annular face of a port ring and form a sealed engagement with the outer annular surface of the port ring, a change assembly having an inner ring and an access element wherein the inner ring has a first annular cylinder body that is sized to be slidably received by the port ring and the access element is configured to be sealably and slidably positioned within the first annular cylinder body of the inner ring.

  17. Multiple-port valve

    DOEpatents

    Doody, Thomas J.

    1978-08-22

    A multiple-port valve assembly is designed to direct flow from a primary conduit into any one of a plurality of secondary conduits as well as to direct a reverse flow. The valve includes two mating hemispherical sockets that rotatably receive a spherical valve plug. The valve plug is attached to the primary conduit and includes diverging passageways from that conduit to a plurality of ports. Each of the ports is alignable wih one or more of a plurality of secondary conduits fitted into one of the hemispherical sockets. The other hemispherical socket includes a slot for the primary conduit such that the conduit's motion along that slot with rotation of the spherical plug about various axes will position the valve-plug ports in respect to the secondary conduits.

  18. Single Port Right Colectomy: Surgical Technique.

    PubMed

    Vîlcea, Ionuţ; Maggiori, Leon; Burcoş, Traean; Panis, Yves

    2016-01-01

    The single port laparoscopic method was first used in 1999 by Bresadola for cholecystectomy. Nearly a decade later, in 2008, the first single port right hemicolectomy was reported by Bucher and others in a case involving an ascending colon polyp (1,2). The continuous technological evolutional lows the first single port right hemicolectomy 17 years after the first laparoscopic hemicolectomy (1991) which was initially met with reluctance and after has gained a well-established place in the range of colorectal surgery (2). Single port access, as well as NOTES, provides, in comparison with the standard laparoscopic procedure, the aesthetic benefit, the decrease of postoperative pain and a shorter duration of hospitalization, while in terms of disadvantages, we could mention a longer surgery duration due to fewer opportunities of triangulation and vision (3,4). The reduction of postoperative pain plus the good aesthetic results with no significant increase of postoperative complications, already proved by retrospective studies, require confirmation by randomized studies envisaged by trial TRUE in France (5). Single port right hemicolectomy can be achieved with oncologic results similar to standard laparoscopic surgery, having very good postoperative results in terms of aesthetics and reduced postoperative pain (5,6,7). PMID:27604677

  19. Depth-discrete sampling port

    DOEpatents

    Pemberton, Bradley E.; May, Christopher P.; Rossabi, Joseph; Riha, Brian D.; Nichols, Ralph L.

    1999-01-01

    A sampling port is provided which has threaded ends for incorporating the port into a length of subsurface pipe. The port defines an internal receptacle which is in communication with subsurface fluids through a series of fine filtering slits. The receptacle is in further communication through a bore with a fitting carrying a length of tubing there which samples are transported to the surface. Each port further defines an additional bore through which tubing, cables, or similar components of adjacent ports may pass.

  20. Depth-discrete sampling port

    DOEpatents

    Pemberton, Bradley E.; May, Christopher P.; Rossabi, Joseph; Riha, Brian D.; Nichols, Ralph L.

    1998-07-07

    A sampling port is provided which has threaded ends for incorporating the port into a length of subsurface pipe. The port defines an internal receptacle which is in communication with subsurface fluids through a series of fine filtering slits. The receptacle is in further communication through a bore with a fitting carrying a length of tubing there which samples are transported to the surface. Each port further defines an additional bore through which tubing, cables, or similar components of adjacent ports may pass.

  1. Double diameter boring tool

    DOEpatents

    Ashbaugh, Fred N.; Murry, Kenneth R.

    1988-12-27

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting edges formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first cutting edge tip to the axis of rotation plus the distance from the second cutting edge tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second cutting edge tip to the axis of rotation minus one-half the distance from the first cutting edge tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  2. Double diameter boring tool

    DOEpatents

    Ashbaugh, F.A.; Murry, K.R.

    1986-02-10

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting flutes formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first flute tip to the axis of rotation plus the distance from the second flute tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second flute tip to the axis of rotation minus one-half the distance from the first flute tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  3. Single-port laparoscopic appendectomy during pregnancy.

    PubMed

    Koh, A Ra; Lee, Jung Hun; Choi, Joong Sub; Eom, Jeong Min; Hong, Jin Hwa

    2012-04-01

    As a result of the increased demand for minimally invasive surgery, single-port laparoscopic surgery performed via a single incision was introduced and has been performed in various fields. Herein, we report our initial experience with single-port laparoscopic appendectomy (SP-LA) using Gelport access for the treatment of acute appendicitis in 2 pregnant women. SP-LA using Gelport access was performed successfully in these pregnant women without prolongation of operation time, and there was no need for ancillary trocar insertions or conversion to conventional laparoscopy. One woman spontaneously delivered at 39 weeks' gestation approximately 20 weeks after the surgery and the other has maintained a healthy pregnancy. SP-LA can be considered a minimally invasive alternative to conventional laparoscopic appendectomy in pregnant women (Supplemental Digital Content 1, http://links.lww.com/SLE/A55).

  4. 51. Port elevation, in port. Note reduced turtle deck due ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    51. Port elevation, in port. Note reduced turtle deck due to quarters expansion. - U.S. Coast Guard Cutter WHITE SUMAC, U.S. Coast Guard 8th District Base, 4640 Urquhart Street, New Orleans, Orleans Parish, LA

  5. Central Vein Dilatation Prior to Concomitant Port Implantation

    SciTech Connect

    Krombach, Gabriele A. Plumhans, Cedric; Goerg, Fabian; Guenther, Rolf W.

    2010-04-15

    Implantation of subcutaneous port systems is routinely performed in patients requiring repeated long-term infusion therapy. Ultrasound- and fluoroscopy-guided implantation under local anesthesia is broadly established in interventional radiology and has decreased the rate of complications compared to the surgical approach. In addition, interventional radiology offers the unique possibility of simultaneous management of venous occlusion. We present a technique for recanalization of central venous occlusion and angioplasty combined with port placement in a single intervention which we performed in two patients. Surgical port placement was impossible owing to occlusion of the superior vena cava following placement of a cardiac pacemaker and occlusion of multiple central veins due to paraneoplastic coagulopathy, respectively. In both cases the affected vessel segments were dilated with balloon catheters and the port systems were placed thereafter. After successful dilatation, the venous access was secured with a 25-cm-long, 8-Fr introducer sheath, a subcutaneous pocket prepared, and the port catheter tunneled to the venipuncture site. The port catheter was introduced through the sheath with the proximal end connected to a 5-Fr catheter. This catheter was pulled through the tunnel in order to preserve the tunnel and, at the same time, allow safe removal of the long sheath over the wire. The port system functioned well in both cases. The combination of recanalization and port placement in a single intervention is a straightforward alternative for patients with central venous occlusion that can only be offered by interventional radiology.

  6. Small diameter carbon nanopipettes

    NASA Astrophysics Data System (ADS)

    Singhal, Riju; Bhattacharyya, Sayan; Orynbayeva, Zulfiya; Vitol, Elina; Friedman, Gary; Gogotsi, Yury

    2010-01-01

    Nanoscale multifunctional carbon probes facilitate cellular studies due to their small size, which makes it possible to interrogate organelles within living cells in a minimally invasive fashion. However, connecting nanotubes to macroscopic devices and constructing an integrated system for the purpose of fluid and electrical signal transfer is challenging, as is often the case with nanoscale components. We describe a non-catalytic chemical vapor deposition based method for batch fabrication of integrated multifunctional carbon nanopipettes (CNPs) with tip diameters much smaller (10-30 nm) than previously reported (200 nm and above) and approaching those observed for multiwalled carbon nanotubes. This eliminates the need for complicated attachment/assembly of nanotubes into nanofluidic devices. Variable tip geometries and structures were obtained by controlled deposition of carbon inside and outside quartz pipettes. We have shown that the capillary length and gas flow rate have a marked effect on the carbon deposition. This gives us a flexible protocol, useful for growing carbon layers of different thicknesses at selective locations on a glass pipette to yield a large variety of cellular probes in bulk quantities. The CNPs possess an open channel for fluid transfer with the carbon deposited inside at 875 °C behaving like an amorphous semiconductor. Vacuum annealing of the CNP tips at temperatures up to 2000 °C yields graphitic carbon structures with an increase in conductivity of two orders of magnitude. Penetration of the integrated carbon nanoprobes into cells was shown to produce minimal Ca2+ signals, fast recovery of basal Ca2+ levels and no adverse activation of the cellular metabolism during interrogation times as long as 0.5-1 h.

  7. Port-Wine Stains

    MedlinePlus

    ... upsetting for kids, especially if they're large, dark, or on the face. And any birthmark can take a toll on a child's self-confidence, no matter how large or small the mark might be. The good news is that lasers (highly concentrated light energy) can make many kids' port-wine stains much ...

  8. ROCKET PORT CLOSURE

    DOEpatents

    Mattingly, J.T.

    1963-02-12

    This invention provides a simple pressure-actuated closure whereby windowless observation ports are opened to the atmosphere at preselected altitudes. The closure comprises a disk which seals a windowless observation port in rocket hull. An evacuated instrument compartment is affixed to the rocket hull adjacent the inner surface of the disk, while the outer disk surface is exposed to the atmosphere through which the rocket is traveling. The pressure differential between the evacuated instrument compartment and the relatively high pressure external atmosphere forces the disk against the edge of the observation port, thereby effecting a tight seai. The instrument compartment is evacuated to a pressure equal to the atmospheric pressure existing at the altitude at which it is desiretl that the closure should open. When the rocket reaches this preselected altitude, the inwardly directed atmospheric force on the disk is just equaled by the residual air pressure force within the instrument compartment. Consequently, the closure disk falls away and uncovers the open observation port. The separation of the disk from the rocket hull actuates a switch which energizes the mechanism of a detecting instrument disposed within the instrument compartment. (AE C)

  9. Limitations on the Optical Tunability of Small Diameter Gold Nanoshells

    PubMed Central

    Rasch, Michael R.; Sokolov, Konstantin V.; Korgel, Brian A.

    2009-01-01

    Gold (Au) nanoshells were grown on silica nanoparticles with differing average diameters, ranging from 30 nm to 120 nm. Au nanoshells were also formed on silica spheres encapsulating 5 nm diameter magnetic iron oxide nanocrystals. The optical absorbance spectra of these Au nanoshells are reported. The plasmon resonance wavelengths of the smaller diameter nanoshells were significantly less tunable than those of the larger diameter nanoshells. This is due to a reduced range of accessible core-shell ratio—the geometric factor that determines the plasmon peak position—as the silica core diameter shrinks. The smaller diameter nanoshells were also found to be highly prone to aggregation, which broadens the plasmon absorption peak. Model calculations of dispersion stability as a function of silica core diameter reveal that smaller diameter Au shells exhibit more aggregation because of the size-dependence of the electrostatic double-layer potential. PMID:19711913

  10. The DIAMET campaign

    NASA Astrophysics Data System (ADS)

    Vaughan, G.

    2012-04-01

    DIAMET (DIAbatic influences on Mesoscale structures in ExTratropical storms) is a joint project between the UK academic community and the Met Office. Its focus is on understanding and predicting mesoscale structures in synoptic-scale storms, and in particular on the role of diabatic processes in generating and maintaining them. Such structures include fronts, rain bands, secondary cyclones, sting jets etc, and are important because much of the extreme weather we experience (e.g. strong winds, heavy rain) comes from such regions. The project conducted two field campaigns in the autumn of 2011, from September 14 - 30 and November 24 - December 14, based around the FAAM BAe146 aircraft with support from ground-based radar and radiosonde measurements. Detailed modelling, mainly using the Met Office Unified model, supported the planning and interpretation of these campaigns. This presentation will give a brief overview of the campaigns. Both in September and November-December the weather regime was westerly, with a strong jet stream directed across the Atlantic. Three IOPs were conducted in September, to observe a convective band ahead of an upper-level trough, waves on a long trailing cold front, and a warm conveyor belt associated with a secondary cyclone. In November-December six IOPs were conducted, to observe frontal passages and high winds. This period was notable for a number of very strong windstorms passing across the north of the UK, and gave us an opportunity to examine bent-back warm fronts in the southern quadrant of these storms where the strongest winds are found. The case studies fell into two basic patterns. In the majority of cases, dropsonde legs at high level were used to obtain a cross-section of winds and thermodynamic structure (e.g. across a front), followed by in situ legs at lower levels (generally where the temperature was between 0 and -10°) to examine microphysical processes, especially ice multiplication and the extent of supercooled water

  11. 22 CFR 120.24 - Port Directors.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Port Directors. 120.24 Section 120.24 Foreign... Port Directors. Port Directors of U.S. Customs and Border Protection means the U.S. Customs and Border Protection Port Directors at the U.S. Customs and Border Protection Ports of Entry (other than the port...

  12. 22 CFR 120.24 - Port Directors.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Port Directors. 120.24 Section 120.24 Foreign... Port Directors. Port Directors of U.S. Customs and Border Protection means the U.S. Customs and Border Protection Port Directors at the U.S. Customs and Border Protection Ports of Entry (other than the port...

  13. 22 CFR 120.24 - Port Directors.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Port Directors. 120.24 Section 120.24 Foreign... Port Directors. Port Directors of U.S. Customs and Border Protection means the U.S. Customs and Border Protection Port Directors at the U.S. Customs and Border Protection Ports of Entry (other than the port...

  14. 22 CFR 120.24 - Port Directors.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Port Directors. 120.24 Section 120.24 Foreign... Port Directors. Port Directors of U.S. Customs and Border Protection means the U.S. Customs and Border Protection Port Directors at the U.S. Customs and Border Protection Ports of Entry (other than the port...

  15. 22 CFR 120.24 - Port Directors.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Port Directors. 120.24 Section 120.24 Foreign... Port Directors. Port Directors of U.S. Customs and Border Protection means the U.S. Customs and Border Protection Port Directors at the U.S. Customs and Border Protection Ports of Entry (other than the port...

  16. Port and Harbor Security

    SciTech Connect

    Saito, T; Guthmuller, H; DeWeert, M

    2004-12-15

    Port and Harbor Security is a daunting task to which optics and photonics offers significant solutions. We are pleased to report that the 2005 Defense and Security Symposium (DSS, Orlando, FL) will include reports on active and passive photonic systems operating from both airborne and subsurface platforms. In addition to imaging techniques, there are various photonic applications, such as total internal reflection fluorescence (TIRF), which can be used to ''sniff'' for traces of explosives or contaminants in marine. These non-imaging technologies are beyond the scope of this article, but will also be represented at DSS 2005. We encourage colleagues to join our technical group to help us to make our ports and harbors safer and more secure.

  17. MedicoPort: a medical search engine for all.

    PubMed

    Can, Aysu Betin; Baykal, Nazife

    2007-04-01

    We present a new next generation domain search engine called MedicoPort. MedicoPort is a medical search engine designed for the users with no medical expertise. It is enhanced with the domain knowledge obtained from Unified Medical Language System (UMLS) to increase the effectiveness of the searches. The power of the system is based on the ability to understand the semantics of web pages and the user queries. MedicoPort transforms a keyword search into a conceptual search. Through our system we present a topical web crawling technique and indexing techniques empowered by the semantics information. MedicoPort aims to generate maximum output with semantic value using minimum input from the user. Since MedicoPort is designed to help people seeking information about health on the web, our target users are not medical specialists who can effectively use the special jargon of medicine and access medical databases. Medical experts have the advantage of shrinking the answer set by expressing several terms using medical terminology. MedicoPort provides the same advantage to its users through the automated use of the medical domain knowledge in the background. The results of our experiments indicate that, expanding the queries with domain knowledge, such as using the synonyms and partially or contextually relevant terms from UMLS, increase dramatically the relevance of an answer set produced by MedicoPort and the number of retrieved web pages that are relevant to the user request.

  18. Robotics for port security

    NASA Astrophysics Data System (ADS)

    Smuda, William; Freiburger, Lonnie A.; Gerhart, Grant R.; Mallon, Lawrence

    2004-09-01

    The capacity through the use of robots with on board visual, NBC and HAZMAT sensors to rapidly and continuously screen convoys and staged exposed assets would be a force multiplier and measurably improve base and force protection at both inbound and outbound DOD and commercial facilities. This paper chronicles our experiment with the ODIS robot at the Ports of Los Angeles (POLA) and Long Beach (POLB) in July of 2003. POLA & POLB are responsible for moving over 30% of the United States trade goods. Queues of 54" container trucks routinely exceed 100 trucks, extending for over a mile from the port entrances. Spotted equipment and convoys at staging areas are a high visibility and value assets to a terrorist incident. The POLA/POLB scenario is also representative of TRANSCOM operations at the port of Basra during current operation in Iraq. The California Highway Patrol is responsible for physically inspecting these vehicles for roadworthiness and contraband, a dangerous and dirty job. We will also discuss the use of ODIS robots for this task.

  19. 33 CFR 165.915 - Security zones; Captain of the Port Detroit.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Security zones; Captain of the Port Detroit. 165.915 Section 165.915 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS AREAS Specific Regulated Navigation Areas...

  20. 33 CFR 165.915 - Security zones; Captain of the Port Detroit.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Security zones; Captain of the Port Detroit. 165.915 Section 165.915 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS AREAS Specific Regulated Navigation Areas...

  1. 33 CFR 165.163 - Safety Zones; Port of New York/New Jersey Fleet Week.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Safety Zones; Port of New York/New Jersey Fleet Week. 165.163 Section 165.163 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS AREAS Specific Regulated Navigation...

  2. Wheel Diameter and Speedometer Reading

    ERIC Educational Resources Information Center

    Murray, Clifton

    2010-01-01

    Most introductory physics students have seen vehicles with nonstandard wheel diameters; some may themselves drive "low-rider" cars or "big-wheel" pickup trucks. But how does changing wheel diameter affect speedometer readout for a given speed? Deriving the answer can be followed readily by students who have been introduced to rotation, and it…

  3. Multi-port valve

    DOEpatents

    Lewin, Keith F.

    1997-04-15

    A multi-port valve for regulating, as a function of ambient air having varying wind velocity and wind direction in an open-field control area, the distribution of a fluid, particularly carbon dioxide (CO.sub.2) gas, in a fluid distribution system so that the control area remains generally at an elevated fluid concentration or level of said fluid. The multi-port valve generally includes a multi-port housing having a plurality of outlets therethrough disposed in a first pattern of outlets and at least one second pattern of outlets, and a movable plate having a plurality of apertures extending therethrough disposed in a first pattern of apertures and at least one second pattern of apertures. The first pattern of apertures being alignable with the first pattern of outlets and the at least one second pattern of apertures being alignable with the second pattern of outlets. The first pattern of apertures has a predetermined orientation with the at least one second pattern of apertures. For an open-field control area subject to ambient wind having a low velocity from any direction, the movable plate is positioned to equally distribute the supply of fluid in a fluid distribution system to the open-field control area. For an open-field control area subject to ambient wind having a high velocity from a given direction, the movable plate is positioned to generally distribute a supply of fluid in a fluid distribution system to that portion of the open-field control area located upwind.

  4. Multi-port valve

    DOEpatents

    Lewin, K.F.

    1997-04-15

    A multi-port valve is described for regulating, as a function of ambient air having varying wind velocity and wind direction in an open-field control area, the distribution of a fluid, particularly carbon dioxide (CO{sub 2}) gas, in a fluid distribution system so that the control area remains generally at an elevated fluid concentration or level of said fluid. The multi-port valve generally includes a multi-port housing having a plurality of outlets there through disposed in a first pattern of outlets and at least one second pattern of outlets, and a movable plate having a plurality of apertures extending there through disposed in a first pattern of apertures and at least one second pattern of apertures. The first pattern of apertures being alignable with the first pattern of outlets and the at least one second pattern of apertures being alignable with the second pattern of outlets. The first pattern of apertures has a predetermined orientation with the at least one second pattern of apertures. For an open-field control area subject to ambient wind having a low velocity from any direction, the movable plate is positioned to equally distribute the supply of fluid in a fluid distribution system to the open-field control area. For an open-field control area subject to ambient wind having a high velocity from a given direction, the movable plate is positioned to generally distribute a supply of fluid in a fluid distribution system to that portion of the open-field control area located upwind. 7 figs.

  5. 19 CFR 18.27 - Port marks.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Port marks. 18.27 Section 18.27 Customs Duties U.S... Port marks. Port marks may be added by authority of the port director and under the supervision of a Customs officer. The original marks and the port marks shall appear in all papers pertaining to...

  6. 19 CFR 18.27 - Port marks.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Port marks. 18.27 Section 18.27 Customs Duties U.S... Port marks. Port marks may be added by authority of the port director and under the supervision of a Customs officer. The original marks and the port marks shall appear in all papers pertaining to...

  7. 22. INTERIOR VIEW OF TYPICAL OIL TANK, PORT SIDE, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. INTERIOR VIEW OF TYPICAL OIL TANK, PORT SIDE, LOOKING FORWARD. NOTE SHIP'S FRAMING MEMBERS AND UNIVERSAL JOINT IN SHAFT FOR PUMPING VALVE AT BOTTOM OF TANK. THE ACCESS LADDER STEPS ARE MARKED WITH LEVEL INDICATIONS. - Ship "Falls of Clyde", Hawaii Maritime Center,Pier 7, Honolulu, Honolulu County, HI

  8. View of the forward section, port side, of the Orbiter ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of the forward section, port side, of the Orbiter Discovery at ground level in the Vehicle Assembly Building at NASA's Kennedy Space Center. Note the exposed panels for systems access during ground support and vehicle turn-around processes. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

  9. Applications of Multi Port Amplifier to personal satellite communications

    NASA Technical Reports Server (NTRS)

    Egami, Shunichiro

    1995-01-01

    In personal satellite communications, satellite antenna beam becomes narrow, and number of beams will be thirty to more than one hundred. This paper shows that Multi Port Amplifier is most suitable to multiple beam transmitter for personal communications satellite. It was shown that the single beam coverage area(cell) diameter is determined by personal earth station(PES) eirp, uplink C/No and uplink frequency band. Required number of cells for European or North American regional coverage at FPLMTS uplink frequency band is shown as around 32. It was shown that 32 beams systems will be easily implemented by using 2 set of 16-port MPA. Redundancy to SSPA failure is considered by increasing number of SSPAs. Actual configuration for 16-port MPA are briefly shown. The presented configuration will be easy to implement and the most economical solution.

  10. 76 FR 69613 - Special Local Regulations and Safety Zones; Recurring Events in Captain of the Port New York Zone

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-09

    ... Zones; Recurring Events in Captain of the Port New York Zone in the Federal Register (76 FR 125). We..., Code for Fireworks Displays (30-yard distance per inch of diameter of the fireworks mortars), and...

  11. Stellar diameters and temperatures. IV. Predicting stellar angular diameters

    SciTech Connect

    Boyajian, Tabetha S.; Van Belle, Gerard; Von Braun, Kaspar

    2014-03-01

    The number of stellar angular diameter measurements has greatly increased over the past few years due to innovations and developments in the field of long baseline optical interferometry. We use a collection of high-precision angular diameter measurements for nearby, main-sequence stars to develop empirical relations that allow the prediction of stellar angular sizes as a function of observed photometric color. These relations are presented for a combination of 48 broadband color indices. We empirically show for the first time a dependence on metallicity of these relations using Johnson (B – V) and Sloan (g – r) colors. Our relations are capable of predicting diameters with a random error of less than 5% and represent the most robust and empirical determinations of stellar angular sizes to date.

  12. Soft-Tissue-Anchored Transcutaneous Port for Long-Term Percutaneous Transhepatic Biliary Drainage

    SciTech Connect

    Nyman, Rickard Ekloef, Hampus; Eriksson, Lars-Gunnar; Karlsson, Britt-Marie; Rasmussen, Ib; Lundgren, Dan; Thomsen, Peter

    2005-01-15

    Purpose. A transcutaneous port (T-port) has been developed allowing easy exchange of a catheter, which was fixed inside the device, using the Seldinger technique. The objective of the study was to test the T-port in patients who had percutaneous transhepatic biliary drainage (PTBD). Methods. The T-port, made of titanium, was implanted using local anesthesia in 11 patients (mean age 65 years, range 52-85 years) with biliary duct obstruction (7 malignant and 4 benign strictures). The subcutaneous part of the T-port consisted of a flange with several perforations allowing ingrowth of connective tissue. The T-port allowed catheter sizes of 10 and 12 Fr. Results. All wounds healed uneventfully and were followed by a stable period without signs of pronounced inflammation or infection. It was easy to open the port and to exchange the drainage tube. The patient's quality of life was considerably improved even though several patients had problems with repeated bile leakage due to frequent recurrent obstructions of the tubes. The ports were implanted for a mean time of 9 months (range 2-21 months). Histologic examination in four cases showed that the port was well integrated into the soft tissue. Tilting of the T-port in two cases led to perforation of the skin by the subcutaneous part of the ports, which were removed after 7 and 8 months. Conclusion. The T-port served as an excellent external access to the biliary ducts. The drainage tubes were well fixed within the ports. The quality of life of the patients was considerably improved. Together with improved aesthetic appearance they found it easier to conduct normal daily activities and personal care. However, the problem of recurrent catheter obstruction remained unsolved.

  13. 33 CFR 110.173 - Port of Charleston, SC.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Port of Charleston, SC. 110.173... 32°45′34″ N., 79°52′12″ W. (2) Commercial Anchorage B. This anchorage is located adjacent to the... located 1800 yards, 118° true from St. Michaels Church Spire and has a diameter of 500 yards....

  14. 33 CFR 110.173 - Port of Charleston, SC.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Port of Charleston, SC. 110.173... 32°45′34″ N., 79°52′12″ W. (2) Commercial Anchorage B. This anchorage is located adjacent to the... located 1800 yards, 118° true from St. Michaels Church Spire and has a diameter of 500 yards....

  15. DIII-D in-vessel port cover and shutter assembly for the phase contrast interferometer

    SciTech Connect

    Phelps, R.D.

    1994-01-01

    The entire outer wall of the DIII-D vacuum vessel interion is covered with a regular array of graphite tiles. Certain of the diagnostic ports through the outer vessel wall contain equipment which is shielded from the plasma by installing port covers designed to withstand energy deposition. If the diagnostic contained in the port must communicate with the vessel volume, a shutter assembly is usually provided. In the ports at 285 degrees, R+1 and R-1, interferometer mirrors have been installed to provide a means for transmitting a large diameter CO-2 laser beam through the edge of the plasma. To protect the mirrors and other hardware contained in these ports, a special protective plate and shutter arrangement has been designed. This report describes the details of design, fabrication, and installation of these protective covers and shutters.

  16. 33 CFR 165.760 - Security Zones; Tampa Bay, Port of Tampa, Port of Saint Petersburg, Port Manatee, Rattlesnake...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... of Tampa, Port of Saint Petersburg, Port Manatee, Rattlesnake, Old Port Tampa, Big Bend, Weedon..., Old Port Tampa, Big Bend, Weedon Island, and Crystal River, Florida. (a) Location. The following areas, denoted by coordinates fixed using the North American Datum of 1983 (World Geodetic System 1984),...

  17. 33 CFR 165.760 - Security Zones; Tampa Bay, Port of Tampa, Port of Saint Petersburg, Port Manatee, Rattlesnake...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... of Tampa, Port of Saint Petersburg, Port Manatee, Rattlesnake, Old Port Tampa, Big Bend, Weedon..., Old Port Tampa, Big Bend, Weedon Island, and Crystal River, Florida. (a) Location. The following areas, denoted by coordinates fixed using the North American Datum of 1983 (World Geodetic System 1984),...

  18. 33 CFR 165.760 - Security Zones; Tampa Bay, Port of Tampa, Port of Saint Petersburg, Port Manatee, Rattlesnake...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... of Tampa, Port of Saint Petersburg, Port Manatee, Rattlesnake, Old Port Tampa, Big Bend, Weedon..., Old Port Tampa, Big Bend, Weedon Island, and Crystal River, Florida. (a) Location. The following areas, denoted by coordinates fixed using the North American Datum of 1983 (World Geodetic System 1984),...

  19. 33 CFR 165.760 - Security Zones; Tampa Bay, Port of Tampa, Port of Saint Petersburg, Port Manatee, Rattlesnake...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... of Tampa, Port of Saint Petersburg, Port Manatee, Rattlesnake, Old Port Tampa, Big Bend, Weedon..., Old Port Tampa, Big Bend, Weedon Island, and Crystal River, Florida. (a) Location. The following areas, denoted by coordinates fixed using the North American Datum of 1983 (World Geodetic System 1984),...

  20. 33 CFR 165.760 - Security Zones; Tampa Bay, Port of Tampa, Port of Saint Petersburg, Port Manatee, Rattlesnake...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... of Tampa, Port of Saint Petersburg, Port Manatee, Rattlesnake, Old Port Tampa, Big Bend, Weedon..., Old Port Tampa, Big Bend, Weedon Island, and Crystal River, Florida. (a) Location. The following areas, denoted by coordinates fixed using the North American Datum of 1983 (World Geodetic System 1984),...

  1. High voltage variable diameter insulator

    DOEpatents

    Vanacek, D.L.; Pike, C.D.

    1982-07-13

    A high voltage feedthrough assembly having a tubular insulator extending between the ground plane ring and the high voltage ring. The insulator is made of Pyrex and decreases in diameter from the ground plane ring to the high voltage ring, producing equipotential lines almost perpendicular to the wall of the insulator to optimize the voltage-holding capability of the feedthrough assembly.

  2. Single-Port Thoracic Surgery: A New Direction

    PubMed Central

    Ng, Calvin S. H.

    2014-01-01

    Single-port video-assisted thoracic surgery (VATS) has slowly established itself as an alternate surgical approach for the treatment of an increasingly wide range of thoracic conditions. The potential benefits of fewer surgical incisions, better cosmesis, and less postoperative pain and paraesthesia have led to the technique’s popularity worldwide. The limited single small incision through which the surgeon has to operate poses challenges that are slowly being addressed by improvements in instrument design. Of note, instruments and video-camera systems that are narrower and angulated have made single-port VATS major lung resection easier to perform and learn. In the future, we may see the development of subcostal or embryonic natural orifice translumenal endoscopic surgery access, evolution in anaesthesia strategies, and cross-discipline imaging-assisted lesion localization for single-port VATS procedures. PMID:25207240

  3. Deepwater ports study. Final report

    SciTech Connect

    Not Available

    1993-10-01

    The study for Congress was required by section 1004 of the Oil Pollution Act of 1990 (OPA 90). The study analyzes the relative environmental and operational risks of the four principal modes for waterborne delivery of crude oil to U.S. ports: direct vessel deliveries, lightering, deepwater ports, and offshore mooring stations; detailed descriptions of these modes are presented. The study finds that most spills are non-catastrophic (less than 1,000 barrels), but that all modes are potentially catastrophic under worst-case scenarios. However, the study determined that deepwater ports are the least-risky of the four modes because cargo operations take place well offshore where minor spills may disperse naturally before impinging upon sensitive ecosystems. Furthermore, seafloor pipeline transfer of oil does not expose it to the same risks encountered by surface ships (adverse weather, fire, collisions, groundings, etc.). The study also includes 1986-1990 crude oil casualty and import data for Gulf coast ports.

  4. 46 CFR 28.555 - Freeing ports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Freeing ports. 28.555 Section 28.555 Shipping COAST... VESSELS Stability § 28.555 Freeing ports. (a) Except as provided in paragraph (i) of this section, each decked vessel fitted with bulwarks must be fitted with freeing ports. (b) Freeing ports must be...

  5. Inland waterway ports nodal attraction indices relevant in development strategies on regional level

    NASA Astrophysics Data System (ADS)

    Dinu, O.; Burciu, Ş.; Oprea, C.; Ilie, A.; Rosca, M.

    2016-08-01

    Present paper aims to propose a set of ranking indices and related criteria, concerning mainly spatial analysis, for the inland waterway port, with special view on inland ports of Danube. Commonly, the attraction potential of a certain transport node is assessed by its spatial accessibility indices considering both spatial features of the location provided by the networks that connect into that node and its economic potential defining the level of traffic flows depending on the economic centers of its hinterland. Paper starts with a overview of the critical needs that are required for potential sites to become inland waterway ports and presents nodal functions that coexist at different levels, leading to a port hierarchy from the points of view of: capacity, connection to hinterland, traffic structure and volume. After a brief review of the key inland waterway port ranking criterion, a selection of nodal attraction measures is made. Particular considerations for the Danube inland port case follows proposed methodology concerning indices of performance for network scale and centrality. As expected, the shorter the distance from an inland port to the nearest access point the greater accessibility. Major differences in ranking, dependent on selected criterion, were registered.

  6. 19 CFR 142.52 - Port-wide and multiple port acceptance of Line Release.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 2 2011-04-01 2011-04-01 false Port-wide and multiple port acceptance of Line... SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) ENTRY PROCESS Line Release § 142.52 Port-wide and multiple port acceptance of Line Release. (a) Port-wide processing. If a C-4 Code has been approved by the...

  7. 19 CFR 142.52 - Port-wide and multiple port acceptance of Line Release.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Port-wide and multiple port acceptance of Line... SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) ENTRY PROCESS Line Release § 142.52 Port-wide and multiple port acceptance of Line Release. (a) Port-wide processing. If a C-4 Code has been approved by the...

  8. Port Granby Project Overview - 13208

    SciTech Connect

    Smith, David W.; Vandergaast, Gary; Sungaila, Mark

    2013-07-01

    The Port Granby Project is an integral part of the Port Hope Area Initiative (PHAI), and is located approximately 14 kilometres west of the Municipality of Port Hope in the adjacent Municipality of Clarington, Ontario. The principal objective of the project is the excavation and relocation of low-level radioactive waste (LLRW) and marginally contaminated soils, which were deposited at the Port Granby Waste Management Facility (PGWMF) by Eldorado Nuclear Limited during the period 1955 to 1988, to a new, highly engineered above-ground Long-term Waste Management Facility (LTWMF) to be constructed on a nearby site. The Environmental Assessment for the Project was approved in 2009 August and the required Waste Nuclear Substance License was received in 2011 November. Once the detailed engineering design was completed, in 2011 March, the Port Granby Project was divided into three major contracts for construction implementation purposes. The first of these contracts was completed in late 2012 and the second is planned to start in early 2013. The contracting process for the third major contract is also expected to be completed during 2013. This paper provides an overview of the Port Granby Project as well as discussion on the status of the Project, including the regulatory approvals process, the approach to contracting the construction works and an update of work recently completed and soon to get underway. (authors)

  9. Multi-port, optically addressed RAM

    NASA Technical Reports Server (NTRS)

    Johnston, Alan R. (Inventor); Nixon, Robert H. (Inventor); Bergman, Larry A. (Inventor); Esener, Sadik (Inventor)

    1989-01-01

    A random access memory addressing system utilizing optical links between memory and the read/write logic circuits comprises addressing circuits including a plurality of light signal sources, a plurality of optical gates including optical detectors associated with the memory cells, and a holographic optical element adapted to reflect and direct the light signals to the desired memory cell locations. More particularly, it is a multi-port, binary computer memory for interfacing with a plurality of computers. There are a plurality of storage cells for containing bits of binary information, the storage cells being disposed at the intersections of a plurality of row conductors and a plurality of column conductors. There is interfacing logic for receiving information from the computers directing access to ones of the storage cells. There are first light sources associated with the interfacing logic for transmitting a first light beam with the access information modulated thereon. First light detectors are associated with the storage cells for receiving the first light beam, for generating an electrical signal containing the access information, and for conducting the electrical signal to the one of the storage cells to which it is directed. There are holographic optical elements for reflecting the first light beam from the first light sources to the first light detectors.

  10. High voltage variable diameter insulator

    DOEpatents

    Vanecek, David L.; Pike, Chester D.

    1984-01-01

    A high voltage feedthrough assembly (10) having a tubular insulator (15) extending between the ground plane ring (16) and the high voltage ring (30). The insulator (15) is made of Pyrex and decreases in diameter from the ground plane ring (16) to the high voltage ring (30), producing equipotential lines almost perpendicular to the wall (27) of the insulator (15) to optimize the voltage-holding capability of the feedthrough assembly (10).

  11. 33 CFR 165.117 - Regulated Navigation Areas, Safety and Security Zones: Deepwater Ports, First Coast Guard District.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., Safety and Security Zones: Deepwater Ports, First Coast Guard District. 165.117 Section 165.117 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS... Limited Access Areas First Coast Guard District § 165.117 Regulated Navigation Areas, Safety and...

  12. 33 CFR 165.117 - Regulated Navigation Areas, Safety and Security Zones: Deepwater Ports, First Coast Guard District.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., Safety and Security Zones: Deepwater Ports, First Coast Guard District. 165.117 Section 165.117 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS... Limited Access Areas First Coast Guard District § 165.117 Regulated Navigation Areas, Safety and...

  13. 33 CFR 165.117 - Regulated Navigation Areas, Safety and Security Zones: Deepwater Ports, First Coast Guard District.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., Safety and Security Zones: Deepwater Ports, First Coast Guard District. 165.117 Section 165.117 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS... Limited Access Areas First Coast Guard District § 165.117 Regulated Navigation Areas, Safety and...

  14. 33 CFR 165.117 - Regulated Navigation Areas, Safety and Security Zones: Deepwater Ports, First Coast Guard District.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., Safety and Security Zones: Deepwater Ports, First Coast Guard District. 165.117 Section 165.117 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS... Limited Access Areas First Coast Guard District § 165.117 Regulated Navigation Areas, Safety and...

  15. 7 CFR 51.2934 - Diameter.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Standards for Grades of Apricots Definitions § 51.2934 Diameter. Diameter means the greatest diameter, measured through the center of the apricot, at right angles to a line running from the stem to the...

  16. 7 CFR 51.2934 - Diameter.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apricots Definitions § 51.2934 Diameter. Diameter means the greatest diameter, measured through the center of the apricot, at right angles to a...

  17. 7 CFR 51.2934 - Diameter.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apricots Definitions § 51.2934 Diameter. Diameter means the greatest diameter, measured through the center of the apricot, at right angles to a...

  18. 7 CFR 51.2934 - Diameter.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Standards for Grades of Apricots Definitions § 51.2934 Diameter. Diameter means the greatest diameter, measured through the center of the apricot, at right angles to a line running from the stem to the...

  19. 7 CFR 51.2934 - Diameter.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Standards for Grades of Apricots Definitions § 51.2934 Diameter. Diameter means the greatest diameter, measured through the center of the apricot, at right angles to a line running from the stem to the...

  20. RePORT International: Advancing Tuberculosis Biomarker Research Through Global Collaboration.

    PubMed

    Hamilton, Carol D; Swaminathan, Soumya; Christopher, Devasahayam J; Ellner, Jerrold; Gupta, Amita; Sterling, Timothy R; Rolla, Valeria; Srinivasan, Sudha; Karyana, Muhammad; Siddiqui, Sophia; Stoszek, Sonia K; Kim, Peter

    2015-10-15

    Progress in tuberculosis clinical research is hampered by a lack of reliable biomarkers that predict progression from latent to active tuberculosis, and subsequent cure, relapse, or failure. Regional Prospective Observational Research in Tuberculosis (RePORT) International represents a consortium of regional cohorts (RePORT India, RePORT Brazil, and RePORT Indonesia) that are linked through the implementation of a Common Protocol for data and specimen collection, and are poised to address this critical research need. Each RePORT network is designed to support local, in-country tuberculosis-specific data and specimen biorepositories, and associated research. Taken together, the expected results include greater global clinical research capacity in high-burden settings, and increased local access to quality data and specimens for members of each network and their domestic and international collaborators. Additional networks are expected to be added, helping to spur tuberculosis treatment and prevention research around the world.

  1. RePORT International: Advancing Tuberculosis Biomarker Research Through Global Collaboration.

    PubMed

    Hamilton, Carol D; Swaminathan, Soumya; Christopher, Devasahayam J; Ellner, Jerrold; Gupta, Amita; Sterling, Timothy R; Rolla, Valeria; Srinivasan, Sudha; Karyana, Muhammad; Siddiqui, Sophia; Stoszek, Sonia K; Kim, Peter

    2015-10-15

    Progress in tuberculosis clinical research is hampered by a lack of reliable biomarkers that predict progression from latent to active tuberculosis, and subsequent cure, relapse, or failure. Regional Prospective Observational Research in Tuberculosis (RePORT) International represents a consortium of regional cohorts (RePORT India, RePORT Brazil, and RePORT Indonesia) that are linked through the implementation of a Common Protocol for data and specimen collection, and are poised to address this critical research need. Each RePORT network is designed to support local, in-country tuberculosis-specific data and specimen biorepositories, and associated research. Taken together, the expected results include greater global clinical research capacity in high-burden settings, and increased local access to quality data and specimens for members of each network and their domestic and international collaborators. Additional networks are expected to be added, helping to spur tuberculosis treatment and prevention research around the world. PMID:26409277

  2. RePORT International: Advancing Tuberculosis Biomarker Research Through Global Collaboration

    PubMed Central

    Hamilton, Carol D.; Swaminathan, Soumya; Christopher, Devasahayam J.; Ellner, Jerrold; Gupta, Amita; Sterling, Timothy R.; Rolla, Valeria; Srinivasan, Sudha; Karyana, Muhammad; Siddiqui, Sophia; Stoszek, Sonia K.; Kim, Peter

    2015-01-01

    Progress in tuberculosis clinical research is hampered by a lack of reliable biomarkers that predict progression from latent to active tuberculosis, and subsequent cure, relapse, or failure. Regional Prospective Observational Research in Tuberculosis (RePORT) International represents a consortium of regional cohorts (RePORT India, RePORT Brazil, and RePORT Indonesia) that are linked through the implementation of a Common Protocol for data and specimen collection, and are poised to address this critical research need. Each RePORT network is designed to support local, in-country tuberculosis-specific data and specimen biorepositories, and associated research. Taken together, the expected results include greater global clinical research capacity in high-burden settings, and increased local access to quality data and specimens for members of each network and their domestic and international collaborators. Additional networks are expected to be added, helping to spur tuberculosis treatment and prevention research around the world. PMID:26409277

  3. [Total parenteral nutrition and the usefulness of CV ports].

    PubMed

    Washizawa, Naohiro; Yajima, Satoshi; Otsuka, Yuichiro; Koike, Junichi; Watanabe, Masashi; Kaneko, Hironori

    2014-10-01

    Management of nutrition in cancer patients plays an important role in supporting anti-cancer treatment. Parenteral nutrition is considered to assist with nutrition in cancer patients. Central venous catheters(CVC)are useful for intravenous infusion of not only nutrients with high osmotic pressure but also chemotherapeutic drugs and other substances. Central venous access through CV ports reduces patient's burden and complications, and it contributes to maintaining a patient's quality of life(QOL).

  4. Bilateral simultaneous single-port (LESS) laparoscopic nephrectomy (laparoendoscopic single site surgery)

    PubMed Central

    Page, Toby; Soomro, N. A.

    2010-01-01

    Minimal access surgery is rapidly expanding and currently single-port surgery is at the forefront of laparoscopy. Operating through a single port is technically demanding but through advances in camera design and instrument design, it is now gaining popularity. It offers minimal scar surgery as well as decreased postoperative pain and swift recovery. Here we present a case of bilateral simultaneous single-port laparoscopic nephrectomy (LESS) laparoendoscopic single site surgery in a 51-year-old man. Illustrating that LESS can be used by surgeons with laparoscopic skills outside of a few major international centers. PMID:21369399

  5. Interface Circuit For Printer Port

    NASA Technical Reports Server (NTRS)

    Tucker, Jerry H.; Yadlowsky, Ann B.

    1991-01-01

    Electronic circuit, called printer-port interface circuit (PPI) developed to overcome certain disadvantages of previous methods for connecting IBM PC or PC-compatible computer to other equipment. Has both reading and writing modes of operation. Very simple, requiring only six integrated circuits. Provides for moderately fast rates of transfer of data and uses existing unmodified circuit card in IBM PC. When used with appropriate software, circuit converts printer port on IBM PC, XT, AT, or compatible personal computer to general purpose, 8-bit-data, 16-bit address bus that connects to multitude of devices.

  6. Intraarterial Infusion Therapy via a Subcutaneous Port for Limb-Threatening Ischemia: A Pilot Study

    SciTech Connect

    Strecker, Ernst-Peter K.; Ostheim-Dzerowycz, Wladimir; Boos, Irene B.L.

    1998-03-15

    Purpose: To present the initial results of a new percutaneously implantable catheter port system (PIPS) used for long-term intraarterial infusion therapy in patients with severe ischemic limb disease. Methods: Ten patients with deep, extended ischemic ulcerations (all 10) and osteomyelitis (6/10) of the foot received intraarterial infusions of prostaglandine E{sub 1} and antibiotics, if indicated, via a new port catheter system with the port placed subcutaneously above the groin after percutaneous introduction and the catheter tip placed into the superficial or deep femoral artery. Results: Port implantation and repeated port access were uncomplicated. During the follow-up period (mean 11 months, range 1 week-50 months), port migration, leakage, or infection was not observed. Three catheters thrombosed and were opened by fibrinolysis with recombinant tissue plasminogen activator instilled via the port. Treatment success was achieved in 8 patients: relief from rest pain (8 patients), reduction of ulcer size (4/8), and complete healing (4/8). Limb savage rate was 80%. In 2 patients amputation could not be avoided. Conclusion: Selective long-term arterial infusion therapy presents a valuable therapeutic regimen for limb salvage. With the new catheter port system, repeated local intraarterial infusion is safe and simple.

  7. The VisPort Project: Visualization of Port Logistics

    ERIC Educational Resources Information Center

    Katsioloudis, Petros J.; Watson, Ginger

    2011-01-01

    There is concern about the diminishing availability of skilled personnel that can operate in the wide variety of disciplines associated with port operations. Increasing cargo volume, combined with a shrinking workforce, could potentially create alarming situations in the future, hence the motivation to publicize to current students the breadth and…

  8. Imaging port wine stains by fiber optical coherence tomography

    NASA Astrophysics Data System (ADS)

    Zhao, Shiyong; Gu, Ying; Xue, Ping; Guo, Jin; Shen, Tingmei; Wang, Tianshi; Huang, Naiyan; Zhang, Li; Qiu, Haixia; Yu, Xin; Wei, Xunbin

    2010-05-01

    We develop a fiber optical coherence tomography (OCT) system in the clinical utility of imaging port wine stains (PWS). We use our OCT system on 41 patients with PWS to document the difference between PWS skin and contralateral normal skin. The system, which operates at 4 frames/s with axial and transverse resolutions of 10 and 9 μm, respectively, in the skin tissue, can clearly distinguish the dilated dermal blood vessels from normal tissue. We present OCT images of patients with PWS and normal human skin. We obtain the structural parameters, including epidermal thickness and diameter and depth of dilated blood vessels. We demonstrate that OCT may be a useful tool for the noninvasive imaging of PWS. It may help determine the photosensitizer dose and laser parameters in photodynamic therapy for treating port wine stains.

  9. 7 CFR 352.9 - Ports.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations in 19 CFR 1.1 and 19 CFR 6.13, and Agana, Guam, or such other ports as may be named in permits or... 7 Agriculture 5 2010-01-01 2010-01-01 false Ports. 352.9 Section 352.9 Agriculture Regulations of... AGRICULTURE PLANT QUARANTINE SAFEGUARD REGULATIONS § 352.9 Ports. The arrival, unloading, landing,...

  10. 46 CFR 45.137 - Cargo ports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Cargo ports. 45.137 Section 45.137 Shipping COAST GUARD....137 Cargo ports. (a) Unless otherwise authorized by the Commandant, the lower edge of any opening for... uppermost loadline. (b) The number of cargo ports in the sides of a ship must be— (1) No more than...

  11. 46 CFR 45.137 - Cargo ports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Cargo ports. 45.137 Section 45.137 Shipping COAST GUARD....137 Cargo ports. (a) Unless otherwise authorized by the Commandant, the lower edge of any opening for... uppermost loadline. (b) The number of cargo ports in the sides of a ship must be— (1) No more than...

  12. 50 CFR 14.19 - Special ports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 1 2010-10-01 2010-10-01 false Special ports. 14.19 Section 14.19... IMPORTATION, EXPORTATION, AND TRANSPORTATION OF WILDLIFE Importation and Exportation at Designated Ports § 14.19 Special ports. (a) Except for wildlife requiring a permit pursuant to part 16, 17, 18, 21, or...

  13. 50 CFR 14.19 - Special ports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 1 2011-10-01 2011-10-01 false Special ports. 14.19 Section 14.19... IMPORTATION, EXPORTATION, AND TRANSPORTATION OF WILDLIFE Importation and Exportation at Designated Ports § 14.19 Special ports. (a) Except for wildlife requiring a permit pursuant to part 16, 17, 18, 21, or...

  14. Single port laparoscopic mesh rectopexy

    PubMed Central

    2016-01-01

    Introduction Traditionally, laparoscopic mesh rectopexy is performed with four ports, in an attempt to improve cosmetic results. Following laparoscopic mesh rectopexy there is a new operative technique called single-port laparoscopic mesh rectopexy. Aim To evaluate the single-port laparoscopic mesh rectopexy technique in control of rectal prolapse and the cosmesis and body image issues of this technique. Material and methods The study was conducted in El Fayoum University Hospital between July 2013 and November 2014 in elective surgery for symptomatic rectal prolapse with single-port laparoscopic mesh rectopexy on 10 patients. Results The study included 10 patients: 3 (30%) males and 7 (70%) females. Their ages ranged between 19 years and 60 years (mean: 40.3 ±6 years), and they all underwent laparoscopic mesh rectopexy. There were no conversions to open technique, nor injuries to the rectum or bowel, and there were no mortalities. Mean operative time was 120 min (range: 90–150 min), and mean hospital stay was 2 days (range: 1–3 days). Preoperatively, incontinence was seen in 5 (50%) patients and constipation in 4 (40%). Postoperatively, improvement in these symptoms was seen in 3 (60%) patients for incontinence and in 3 (75%) for constipation. Follow-up was done for 6 months and no recurrence was found with better cosmetic appearance for all patients. Conclusions Single-port laparoscopic mesh rectopexy is a safe procedure with good results as regards operative time, improvement in bowel function, morbidity, cost, and recurrence, and with better cosmetic appearance. PMID:27350840

  15. 78 FR 37878 - Deepwater Port License Application: Liberty Natural Gas LLC, Port Ambrose Deepwater Port

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-24

    ... of Transportation Privacy Act Notice that appeared in the Federal Register on April 11, 2000 (65 FR... (LNG) Deepwater Port appears in the Federal Register on June 14, 2013, 78 FR 36014. The ``Summary of... Bachman, U.S. Coast Guard, telephone: 202-372-1451, email: Roddy.C.Bachman@uscg.mil , or Tracey...

  16. Microsecond regime optical cross connect: 32 port to 32 port scalable device

    NASA Astrophysics Data System (ADS)

    Lynn, Brittany; Miles, Alexander; Blanche, Pierre-Alexandre; Wissinger, John; Carothers, Daniel; Norwood, Robert A.; Peyghambarian, N.

    2014-03-01

    Presented here is a 32 × 32 optical switch for telecommunications applications capable of reconfiguring at speeds of up to 12 microseconds. The free space switching mechanism in this interconnect is a digital micromirror device (DMD) consisting of a 2D array of 10.8μm mirrors optimized for implementation at 1.55μm. Hinged along one axis, each micromirror is capable of accessing one of two positions in binary fashion. In general reflection based applications this corresponds to the ability to manifest only two display states with each mirror, but by employing this binary state system to display a set of binary amplitude holograms, we are able to access hundreds of distinct locations in space. We previously demonstrated a 7 × 7 switch employing this technology, providing a proof of concept device validating our initial design principles but exhibiting high insertion and wavelength dependent losses. The current system employs 1920 × 1080 DMD, allowing us to increase the number of accessible ports to 32 × 32. Adjustments in imaging, coupling component design and wavelength control were also made in order to improve the overall loss of the switch. This optical switch performs in a bit-rate and protocol independent manner, enabling its use across various network fabrics and data rates. Additionally, by employing a diffractive switching mechanism, we are able to implement a variety of ancillary features such as dynamic beam pick-off for monitoring purposes, beam division for multicasting applications and in situ attenuation control.

  17. Incidence of Port-Site Incisional Hernia After Single-Incision Laparoscopic Surgery

    PubMed Central

    Rainville, Harvey; Ikedilo, Ojinika; Vemulapali, Pratibha

    2014-01-01

    Background and Objectives: Single-incision laparoscopic surgery is gaining popularity among minimally invasive surgeons and is now being applied to a broad number of surgical procedures. Although this technique uses only 1 port, the diameter of the incision is larger than in standard laparoscopic surgery. The long-term incidence of port-site hernias after single-incision laparoscopic surgery has yet to be determined. Methods: All patients who underwent a single-incision laparoscopic surgical procedure from May 2008 through May 2009 were included in the study. Single-incision laparoscopic surgical operations were performed either by a multiport technique or with a 3-trocar single-incision laparoscopic surgery port. The patients were seen at 30 to 36 months' follow-up, at which time they were examined for any evidence of port-site incisional hernia. Patients found to have hernias on clinical examination underwent repairs with mesh. Results: A total of 211 patients met the criteria for inclusion in the study. The types of operations included were cholecystectomy, appendectomy, sleeve gastrectomy, gastric banding, Nissen fundoplication, colectomy, and gastrojejunostomy. We found a port-site hernia rate of 2.9% at 30 to 36 months' follow-up. Conclusion: Port-site incisional hernia after single-incision laparoscopic surgical procedures remains a major setback for patients. The true incidence remains largely unknown because most patients are asymptomatic and therefore do not seek surgical aid. PMID:24960483

  18. Design and evaluation of candidate pressure ports for the HYFLITE experiment

    NASA Technical Reports Server (NTRS)

    Teter, John E., Jr.; Cleckner, Craig S.; Vontheumer, Alfred E.

    1994-01-01

    A concept for placing a pressure transducer directly in a shuttle type tile was developed at Langley Research Center. A 5 inch long quartz with a .020 inch inner diameter provides the thermal isolation necessary to allow 2800 F surface pressure measurements to be taken by pressure transducer rated at 250 F. The assembly is potted in place with RTV 560 in a piece of FRCI-12 thermal protection system insulation tile. The integrity of the thermal protection system is maintained even with the intrusion of the pressure port assembly and the pressure port does not disrupt the air flow across the lifting body. Approximately 200 of these pressure ports are to be used in each of the Hypersonic Flight Experiment (HYFLITE) flight tests. Initial vibroacoustic and aerothermal testing of the pressure port designs have been completed at Langley Research vibration laboratory and the 20 MWatt 2 x 9 turbulent duct facility at Ames Research Center. The performance of the pressure ports were found to be well within the required design limits for all cases. In addition, a failure mode in which the entire pressure port assembly was removed proved to be a begin case.

  19. Single-port thoracoscopic surgery for pneumothorax under two-lung ventilation with carbon dioxide insufflation

    PubMed Central

    Han, Kook Nam; Lee, Hyun Joo; Lee, Dong Kyu; Kim, Heezoo; Lim, Sang Ho; Choi, Young Ho

    2016-01-01

    Background The development of single-port thoracoscopic surgery and two-lung ventilation reduced the invasiveness of minor thoracic surgery. This study aimed to evaluate the feasibility and safety of single-port thoracoscopic bleb resection for primary spontaneous pneumothorax using two-lung ventilation with carbon dioxide insufflation. Methods Between February 2009 and May 2014, 130 patients underwent single-port thoracoscopic bleb resection under two-lung ventilation with carbon dioxide insufflation. Access was gained using a commercial multiple-access single port through a 2.5-cm incision; carbon dioxide gas was insufflated through a port channel. A 5-mm thoracoscope, articulating endoscopic devices, and flexible endoscopic staplers were introduced through a multiple-access single port for bulla resection. Results The mean time from endotracheal intubation to incision was 29.2±7.8 minutes, the mean operative time was 30.9±8.2 minutes, and the mean total anesthetic time was 75.5±14.4 minutes. There were no anesthesia-related complications or wound problems. The chest drain was removed after a mean of 3.7±1.4 days and patients were discharged without complications 4.8±1.5 days from the operative day. During a mean 7.5±10.1 months of follow-up, there were five recurrences (3.8%) in operated thorax. Conclusions The anesthetic strategy of single-lumen intubation with carbon dioxide gas insufflation can be a safe and feasible option for single-port thoracoscopic bulla resection as it represents the least invasive surgical option with the potential advantages of reducing operative time and one-lung ventilation-related complications without diminishing surgical outcomes. PMID:27293823

  20. General view of the middeck looking aft and port. In ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    General view of the mid-deck looking aft and port. In this view you can clearly see the crew access hatch and the airlock hatch. The hose and ladder in the image are pieces of ground support equipment. The hose is part of the climate control apparatus used while orbiters are being processed. The ladder is used to access the inter-deck passage, leading to the flight deck, while the orbiter is in 1g (earth's gravity). A careful observer will notice a void in the wall near the base of the access ladder, this is the Waste Management Compartment with the Waste Management System, i.e. Space Potty, removed. This view was taken in the Orbiter Processing Facility at the Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

  1. Testing and Analysis of Sensor Ports

    NASA Technical Reports Server (NTRS)

    Zhang, M.; Frendi, A.; Thompson, W.; Casiano, M. J.

    2016-01-01

    This Technical Publication summarizes the work focused on the testing and analysis of sensor ports. The tasks under this contract were divided into three areas: (1) Development of an Analytical Model, (2) Conducting a Set of Experiments, and (3) Obtaining Computational Solutions. Results from the experiment using both short and long sensor ports were obtained using harmonic, random, and frequency sweep plane acoustic waves. An amplification factor of the pressure signal between the port inlet and the back of the port is obtained and compared to models. Comparisons of model and experimental results showed very good agreement.

  2. Videoendoscopic single-port axillary dissection

    PubMed Central

    Uras, Cihan; Aytac, Erman; Aydogan, Fatih

    2011-01-01

    Videoendoscopy is newly used in breast and axillary surgery. Single-port surgery is one of the newest methods of minimally invasive surgery. This report describes the first case of videoendoscopic single-port axillary dissection. In histopathological evaluation, 24 lymph nodes were identified and one node was infiltrated by the cancer cells. Videoendoscopic single-port axillary dissection is a precise and improvable technique. Single-port videoendoscopic axillary dissection could be more feasible with individual tools that will be designed for minimally invasive breast surgery. PMID:22022116

  3. Pupil Diameter Tracks Lapses of Attention

    PubMed Central

    Murphy, Peter R.; Nieuwenhuis, Sander

    2016-01-01

    Our ability to sustain attention for prolonged periods of time is limited. Studies on the relationship between lapses of attention and psychophysiological markers of attentional state, such as pupil diameter, have yielded contradicting results. Here, we investigated the relationship between tonic fluctuations in pupil diameter and performance on a demanding sustained attention task. We found robust linear relationships between baseline pupil diameter and several measures of task performance, suggesting that attentional lapses tended to occur when pupil diameter was small. However, these observations were primarily driven by the joint effects of time-on-task on baseline pupil diameter and task performance. The linear relationships disappeared when we statistically controlled for time-on-task effects and were replaced by consistent inverted U-shaped relationships between baseline pupil diameter and each of the task performance measures, such that most false alarms and the longest and most variable response times occurred when pupil diameter was both relatively small and large. Finally, we observed strong linear relationships between the temporal derivative of pupil diameter and task performance measures, which were largely independent of time-on-task. Our results help to reconcile contradicting findings in the literature on pupil-linked changes in attentional state, and are consistent with the adaptive gain theory of locus coeruleus-norepinephrine function. Moreover, they suggest that the derivative of baseline pupil diameter is a potentially useful psychophysiological marker that could be used in the on-line prediction and prevention of attentional lapses. PMID:27768778

  4. Diameter Effect In Initiating Explosives, Numerical Simulations

    SciTech Connect

    Lefrancois, A.; Benterou, J.; Roeske, F.; Roos, E.

    2006-02-10

    The ability to safely machine small pieces of HE with the femtosecond laser allows diameter effect experiments to be performed in initiating explosives in order to study the failure diameter, the reduction of the detonation velocity and curvature versus the diameter. The reduced diameter configuration needs to be optimized, so that the detonation products of the first cylinder will not affect the measurement of the detonation velocity of the second cylinder with a streak camera. Different 2D axi-symmetrical configurations have been calculated to identify the best solution using the Ignition and Growth reactive flow model for LX16 Pellet with Ls-Dyna.

  5. Detail view of the port side of the aft fuselage ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail view of the port side of the aft fuselage of the Orbiter Discovery in the transfer aisle of the Vehicle Assembly Building at Kennedy Space Center with a lifting frame attached to the aft attach points of the orbiter. In this view, the Orbiter Maneuvering/Reaction Control Systems pod is in place. Also note the darker-colored trapezoidal aft fuselage access door and the T-0 umbilical panel to its right in the view. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

  6. Port side view of the Orbiter Discovery from an elevated ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Port side view of the Orbiter Discovery from an elevated platform in the Vehicle Assembly Building at NASA's Kennedy Space Center. Note the ground support hardware known as Strongbacks attached to the payload bay doors, the crew access hatch below the name Discovery on the forward section of the Orbiter and the removed Orbiter Maneuvering System/Reaction Control System pod from the aft (tai) section. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

  7. Graft Diameter matters in Hamstring ACL reconstruction

    PubMed Central

    Clatworthy, Mark

    2016-01-01

    Objective: Recently techniques have been developed to increase graft diameter in hamstring ACL reconstruction with the hope to decrease graft failure. To date there is limited evidence to show that a smaller graft diameter results in a higher ACL failure rate. Method: The factors for failure in 1480 consecutive single surgeon hamstring ACL reconstructions were evaluated prospectively. Patients were followed for 2-15 years. A multivariate analysis was performed which looked at graft size, age, sex, time to surgery, meniscal integrity, meniscal repair and ACL graft placement to determine whether graft diameter matters in determining the failure of hamstring ACL reconstruction. Results: Graft diameters ranged from 6-10 mm. The mean graft diameter for all patients was 7.75 mm. 83 ACL reconstructions failed. The mean size of graft failures was 7.55 mm ACL reconstructions that failed had a significantly smaller hamstring graft diameter p=0.001. The Hazard Ratio for a smaller diameter graft is 0.517 p=<0.0001. For every 1 mm decrease in graft diameter there is a 48.3% higher chance of failure. The multivariate analysis showed a hazard ratio of 0.543 p=0.002. For every 1 mm decrease in graft diameter there is a 45.7% higher chance of failure. Conclusion: Smaller diameter hamstring grafts do have a higher failure rate. Grafts ≤ 7.5 mm had twice the failure rate of grafts ≥8 mm using a multivariate analysis for every 1 mm decrease in graft diameter there is a 45.7% higher chance of failure.

  8. 7 CFR 51.2850 - Diameter.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Diameter. Diameter means the greatest dimension measured at right angles to a straight line running...

  9. 7 CFR 51.651 - Diameter.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946...) Definitions § 51.651 Diameter. Diameter means the greatest dimension measured at right angles to a line...

  10. 7 CFR 51.712 - Diameter.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... § 51.712 Diameter. Diameter means the greatest dimension measured at right angles to a line from...

  11. Shrinking plastic tubing and nonstandard diameters

    NASA Technical Reports Server (NTRS)

    Ruiz, W. V.; Thatcher, C. S.

    1980-01-01

    Process allows larger-than-normal postshrink diameters without splitting. Tetrafluoroethylene tubing on mandrel is supported within hot steel pipe by several small diameter coil sections. Rising temperature of mandrel is measured via thermocouple so assembly can be removed without overshrinking (and splitting) of tubing.

  12. 7 CFR 51.2850 - Diameter.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Diameter. Diameter means the greatest dimension measured at right angles to a straight line running...

  13. 7 CFR 51.651 - Diameter.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946...) Definitions § 51.651 Diameter. Diameter means the greatest dimension measured at right angles to a line...

  14. 7 CFR 51.712 - Diameter.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... § 51.712 Diameter. Diameter means the greatest dimension measured at right angles to a line from...

  15. Location of an intermediate hub for port activities

    NASA Astrophysics Data System (ADS)

    Burciu, Ş.; Ştefănică, C.; Roşca, E.; Dragu, V.; Ruscă, F.

    2015-11-01

    An intermediate hub might increase the accessibility level of ports but also hinterland and so it can be considered more than a facility with a transhipment role. These hubs might lead to the development of other transport services and enhance their role in gathering and covering economic centres within hinterlands and also getting the part of logistic facility for the ports, with effects on port utilization and its connectivity to global economy. A new location for a hub terminal leads to reduced transport distances within hinterland, with decreased transport costs and external effects, so with gains in people's life quality. Because the production and distribution systems are relatively fixed on short and medium term and the location decisions are strategic and on long term, the logistic chains activities location models have to consider the uncertainties regarding the possible future situations. In most models, production costs are considered equal, the location problem reducing itself to a problem that aims to minimize the total transport costs, meaning the transport problem. The main objective of the paper is to locate a hub terminal that links the producers of cereals that are going to be exported by naval transportation with the Romanian fluvial-maritime ports (Galaţi, Brăila). GIS environment can be used to integrate and analyse a great amount of data and has the ability of using functions as location - allocation models necessary both to private and public sector, being able to determine the optimal location for services like factories, warehouses, logistic platforms and other public services.

  16. Contextual view of ILWU Hall, facing northwest with commercial port ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Contextual view of ILWU Hall, facing northwest with commercial port buildings visible in the background - International Longshoremen's & Warehousemen's Union Hall, Naval Civil Engineering Laboratory, Port Hueneme Road, Port Hueneme, Ventura County, CA

  17. Rorschach inkblot port-wine stain.

    PubMed

    Coots, N V; Elston, D M

    1997-01-01

    We present an infant born with bilaterally symmetric, anterior and posterior port-wine stains. These lesions presented a striking resemblance to Rorschach inkblots, a phenomenon not previously reported. A discussion of the case as well as a discussion of syndromes associated with port-wine stains is provided.

  18. 46 CFR 171.116 - Port lights.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... gross tons; and (2) It is in ocean service. (b) All port lights in a space must be non-opening if the sill of any port light in that space is below a line that— (1) Is drawn parallel to the line formed by... percent of the beam of the vessel above the deepest subdivision load line. (c) For the purpose...

  19. 46 CFR 171.116 - Port lights.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... gross tons; and (2) It is in ocean service. (b) All port lights in a space must be non-opening if the sill of any port light in that space is below a line that— (1) Is drawn parallel to the line formed by... percent of the beam of the vessel above the deepest subdivision load line. (c) For the purpose...

  20. 46 CFR 171.116 - Port lights.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... gross tons; and (2) It is in ocean service. (b) All port lights in a space must be non-opening if the sill of any port light in that space is below a line that— (1) Is drawn parallel to the line formed by... percent of the beam of the vessel above the deepest subdivision load line. (c) For the purpose...

  1. 46 CFR 171.116 - Port lights.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... gross tons; and (2) It is in ocean service. (b) All port lights in a space must be non-opening if the sill of any port light in that space is below a line that— (1) Is drawn parallel to the line formed by... percent of the beam of the vessel above the deepest subdivision load line. (c) For the purpose...

  2. 46 CFR 171.116 - Port lights.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... gross tons; and (2) It is in ocean service. (b) All port lights in a space must be non-opening if the sill of any port light in that space is below a line that— (1) Is drawn parallel to the line formed by... percent of the beam of the vessel above the deepest subdivision load line. (c) For the purpose...

  3. 50 CFR 14.16 - Border ports.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 1 2012-10-01 2012-10-01 false Border ports. 14.16 Section 14.16 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION..., EXPORTATION, AND TRANSPORTATION OF WILDLIFE Importation and Exportation at Designated Ports § 14.16...

  4. 50 CFR 14.16 - Border ports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 1 2011-10-01 2011-10-01 false Border ports. 14.16 Section 14.16 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION..., EXPORTATION, AND TRANSPORTATION OF WILDLIFE Importation and Exportation at Designated Ports § 14.16...

  5. 50 CFR 14.16 - Border ports.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 1 2014-10-01 2014-10-01 false Border ports. 14.16 Section 14.16 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION..., EXPORTATION, AND TRANSPORTATION OF WILDLIFE Importation and Exportation at Designated Ports § 14.16...

  6. 50 CFR 14.16 - Border ports.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 1 2013-10-01 2013-10-01 false Border ports. 14.16 Section 14.16 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION..., EXPORTATION, AND TRANSPORTATION OF WILDLIFE Importation and Exportation at Designated Ports § 14.16...

  7. U.S. Offshore Wind Port Readiness

    SciTech Connect

    C. Elkinton, A. Blatiak, H. Ameen

    2013-10-13

    This study will aid decision-makers in making informed decisions regarding the choice of ports for specific offshore projects, and the types of investments that would be required to make individual port facilities suitable to serve offshore wind manufacturing, installation and/or operations.

  8. Single-port laparoscopy: Considerations in children

    PubMed Central

    Ponsky, Todd A; Krpata, David M

    2011-01-01

    As the quest to minimize scars from surgery continues, innovative methods of surgery, including single-port surgery, have come to the forefront. Here, we review considerations for surgery in children with particular attention to appendectomy and cholecystectomy. We discuss the future technologies that will aid in single-port surgery and how they apply to the paediatric population. PMID:21197252

  9. Texas deepwater oil ports vie for support

    SciTech Connect

    Koen, A.D.

    1991-03-25

    Two proposals for deepwater oil ports in the Gulf of Mexico apparently are competing for support from several of the same companies. Port of Corpus Christi Authority (PCCA) officials believe some companies to which they have broadened preliminary ideas for an inshore deepwater oil port also are members of a group studying plans for a deepwater port off Freeport, Tex. Safeharbor, proposed on Harbor Island across from Mustang Island in the Corpus Christi Ship Channel (CCSC), and Texas Offshore Oil Port (Texport) won't vie for exactly the same oil imports. Companies importing oil to refineries on Corpus Christi Bay would account for about half the 1 million b/d PCCA officials believe will be needed for Safeharbor to be economically viable. The rest would come from companies moving imported oil into the Houston area through Galveston Bay.

  10. 33 CFR 165.809 - Security Zones; Port of Port Lavaca-Point Comfort, Point Comfort, TX and Port of Corpus Christi...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security Zones; Port of Port Lavaca-Point Comfort, Point Comfort, TX and Port of Corpus Christi Inner Harbor, Corpus Christi, TX. 165... Lavaca-Point Comfort, Point Comfort, TX and Port of Corpus Christi Inner Harbor, Corpus Christi, TX....

  11. Integrated circuit test-port architecture and method and apparatus of test-port generation

    DOEpatents

    Teifel, John

    2016-04-12

    A method and apparatus are provided for generating RTL code for a test-port interface of an integrated circuit. In an embodiment, a test-port table is provided as input data. A computer automatically parses the test-port table into data structures and analyzes it to determine input, output, local, and output-enable port names. The computer generates address-detect and test-enable logic constructed from combinational functions. The computer generates one-hot multiplexer logic for at least some of the output ports. The one-hot multiplexer logic for each port is generated so as to enable the port to toggle between data signals and test signals. The computer then completes the generation of the RTL code.

  12. 19 CFR 122.188 - Issuance of temporary Customs access seal.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Issuance of temporary Customs access seal. 122.188... temporary Customs access seal. (a) Conditions for issuance. When an approved Customs access seal is required... temporary Customs access seal for his employee. The employer must satisfy the port director that a...

  13. 19 CFR 122.185 - Report of loss or theft of Customs access seal.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Report of loss or theft of Customs access seal... Report of loss or theft of Customs access seal. The loss or theft of an approved Customs access seal must be promptly reported in writing by the employee to the port director. The Customs access seal may...

  14. 19 CFR 122.188 - Issuance of temporary Customs access seal.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Issuance of temporary Customs access seal. 122.188... temporary Customs access seal. (a) Conditions for issuance. When an approved Customs access seal is required... temporary Customs access seal for his employee. The employer must satisfy the port director that a...

  15. 19 CFR 122.185 - Report of loss or theft of Customs access seal.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Report of loss or theft of Customs access seal... Report of loss or theft of Customs access seal. The loss or theft of an approved Customs access seal must be promptly reported in writing by the employee to the port director. The Customs access seal may...

  16. 19 CFR 122.185 - Report of loss or theft of Customs access seal.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Report of loss or theft of Customs access seal... Report of loss or theft of Customs access seal. The loss or theft of an approved Customs access seal must be promptly reported in writing by the employee to the port director. The Customs access seal may...

  17. 19 CFR 122.188 - Issuance of temporary Customs access seal.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Issuance of temporary Customs access seal. 122.188... temporary Customs access seal. (a) Conditions for issuance. When an approved Customs access seal is required... temporary Customs access seal for his employee. The employer must satisfy the port director that a...

  18. 19 CFR 122.188 - Issuance of temporary Customs access seal.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Issuance of temporary Customs access seal. 122.188... temporary Customs access seal. (a) Conditions for issuance. When an approved Customs access seal is required... temporary Customs access seal for his employee. The employer must satisfy the port director that a...

  19. 19 CFR 122.185 - Report of loss or theft of Customs access seal.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Report of loss or theft of Customs access seal... Report of loss or theft of Customs access seal. The loss or theft of an approved Customs access seal must be promptly reported in writing by the employee to the port director. The Customs access seal may...

  20. 19 CFR 122.185 - Report of loss or theft of Customs access seal.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Report of loss or theft of Customs access seal... Report of loss or theft of Customs access seal. The loss or theft of an approved Customs access seal must be promptly reported in writing by the employee to the port director. The Customs access seal may...

  1. 19 CFR 122.188 - Issuance of temporary Customs access seal.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Issuance of temporary Customs access seal. 122.188... temporary Customs access seal. (a) Conditions for issuance. When an approved Customs access seal is required... temporary Customs access seal for his employee. The employer must satisfy the port director that a...

  2. High regression rate hybrid rocket fuel grains with helical port structures

    NASA Astrophysics Data System (ADS)

    Walker, Sean D.

    Hybrid rockets are popular in the aerospace industry due to their storage safety, simplicity, and controllability during rocket motor burn. However, they produce fuel regression rates typically 25% lower than solid fuel motors of the same thrust level. These lowered regression rates produce unacceptably high oxidizer-to-fuel (O/F) ratios that produce a potential for motor instability, nozzle erosion, and reduced motor duty cycles. To achieve O/F ratios that produce acceptable combustion characteristics, traditional cylindrical fuel ports are fabricated with very long length-to-diameter ratios to increase the total burning area. These high aspect ratios produce further reduced fuel regression rate and thrust levels, poor volumetric efficiency, and a potential for lateral structural loading issues during high thrust burns. In place of traditional cylindrical fuel ports, it is proposed that by researching the effects of centrifugal flow patterns introduced by embedded helical fuel port structures, a significant increase in fuel regression rates can be observed. The benefits of increasing volumetric efficiencies by lengthening the internal flow path will also be observed. The mechanisms of this increased fuel regression rate are driven by enhancing surface skin friction and reducing the effect of boundary layer "blowing" to enhance convective heat transfer to the fuel surface. Preliminary results using additive manufacturing to fabricate hybrid rocket fuel grains from acrylonitrile-butadiene-styrene (ABS) with embedded helical fuel port structures have been obtained, with burn-rate amplifications up to 3.0x than that of cylindrical fuel ports.

  3. [Laparoscopic cholecystectomy with three-port and 25 millimeters long incision.

    PubMed

    Gómez Tagle-Morales, Enrique David

    2013-01-01

    Background: three-port and 25 mm total incision laparoscopic cholecystectomy has shown benefits compared to conventional laparoscopy. The aim was to examine the safety and feasibility of this technique. Methods: a three-port laparoscopic cholecystectomy trial was conducted through Cinvestav metasearcher, Seriunam and Rencis. The eligibility criteria were: three port laparoscopic cholecystectomy, 25 mm total incision, and score = 17 on Data Review System. Trials which employed instruments smaller than 5 mm in diameter were excluded. The comparative variables were documented and results obtained in the selected trials were described. Results: four trials were selected, comprising 1767 cases (1329 females and 438 males), average age was 44.3 years. Chronic cholecystitis was documented in 84.3 %, and acute cholecystitis in 14.7 %. Average surgical time was 54.5 minutes. An additional port was required in 4.8 % and 1.4 % was converted to open technique. Bile duct injury was presented in 0.11 %. The success rate was 94.9 %. Conclusions: three port and 25 mm total incision in laparoscopic cholecystectomy is safe and feasible.

  4. Electromagnetic Analysis For The Design Of ITER Diagnostic Port Plugs During Plasma Disruptions

    SciTech Connect

    Zhai, Y

    2014-03-03

    ITER diagnostic port plugs perform many functions including structural support of diagnostic systems under high electromagnetic loads while allowing for diagnostic access to plasma. The design of diagnotic equatorial port plugs (EPP) are largely driven by electromagnetic loads and associate response of EPP structure during plasma disruptions and VDEs. This paper summarizes results of transient electromagnetic analysis using Opera 3d in support of the design activities for ITER diagnostic EPP. A complete distribution of disruption loads on the Diagnostic First Walls (DFWs). Diagnostic Shield Modules (DSMs) and the EPP structure, as well as impact on the system design integration due to electrical contact among various EPP structural components are discussed.

  5. Growth of nanostructures with controlled diameter

    DOEpatents

    Pfefferle, Lisa; Haller, Gary; Ciuparu, Dragos

    2009-02-03

    Transition metal-substituted MCM-41 framework structures with a high degree of structural order and a narrow pore diameter distribution were reproducibly synthesized by a hydrothermal method using a surfactant and an anti-foaming agent. The pore size and the mesoporous volume depend linearly on the surfactant chain length. The transition metals, such as cobalt, are incorporated substitutionally and highly dispersed in the silica framework. Single wall carbon nanotubes with a narrow diameter distribution that correlates with the pore diameter of the catalytic framework structure were prepared by a Boudouard reaction. Nanostructures with a specified diameter or cross-sectional area can therefore be predictably prepared by selecting a suitable pore size of the framework structure.

  6. Gene Tree Diameter for Deep Coalescence.

    PubMed

    Górecki, Paweł; Eulenstein, Oliver

    2015-01-01

    The deep coalescence cost accounts for discord caused by deep coalescence between a gene tree and a species tree. It is a major concern that the diameter of a gene tree (the tree's maximum deep coalescence cost across all species trees) depends on its topology, which can largely obfuscate phylogenetic studies. While this bias can be compensated by normalizing the deep coalescence cost using diameters, obtaining them efficiently has been posed as an open problem by Than and Rosenberg. Here, we resolve this problem by describing a linear time algorithm to compute the diameter of a gene tree. In addition, we provide a complete classification of the species trees yielding this diameter to guide phylogenetic analyses.

  7. Implantable Port Devices, Complications and outcome in Pediatric Cancer, a Retrospective Study

    PubMed Central

    Esfahani, H; Ghorbanpor, M; Tanasan, A

    2016-01-01

    Background Peripheral blood vessels, due to availability are used for many years in cancer patients, however in patients with potentially harmful drugs to skin (vesicant drugs) or difficult accessibility to vessels, the use of implantable port (totally implantable venous access port-TIVAP) devices with central vascular access are important. Materials and Methods In this retrospective study, 85 pediatric cancer patients younger than 16 years, with TIVAP implantation, were followed for their complications and outcome. In addition to demographic data, patients’ port complications were assessed and compared with published articles. Results Mean days of implanted port usage were 531 ± 358 days in all patients. This period was 287 ±194 days in complicated patients. Complications included as infection (tunnel infection and catheter related blood-stream infection), malfunction and thrombosis, skin erosion, tube avulsion, and tube adhesion to the adjacent vessels were seen in 30.6% of patients. Conclusion According to the published data and this experience, the most common complications in TIVAP are infection and catheter malfunction. It is important to notice that in order to prolong its efficacious life, effective sterilization methods, prevention of clot formation and trauma, are the most useful measures. PMID:27222696

  8. Large diameter carbon-boron fiber

    NASA Technical Reports Server (NTRS)

    Veltri, R. D.; Jacob, B. A.; Galasso, F. S.

    1975-01-01

    Investigations concerned with a development of large-diameter carbon fibers are considered, taking into account the employment of vapor deposition techniques. In the experiments a carbon monofilament substrate is used together with reacting gases which consist of combinations of hydrogen, methane, and boron trichloride. It is found that the described approach can be used to obtain a large-diameter carbon filament containing boron. The filament has reasonable strength and modulus properties.

  9. Precision wire feeder for small diameter wire

    DOEpatents

    Brandon, Eldon D.; Hooper, Frederick M.; Reichenbach, Marvin L.

    1992-01-01

    A device for feeding small diameter wire having a diameter less than 0.04 mm (16 mil) to a welding station includes a driving wheel for controllably applying a non-deforming driving force to the wire to move the free end of the wire towards the welding station; and a tension device such as a torque motor for constantly applying a reverse force to the wire in opposition to the driving force to keep the wire taut.

  10. Precision wire feeder for small diameter wire

    DOEpatents

    Brandon, E.D.; Hooper, F.M.; Reichenbach, M.L.

    1992-08-11

    A device for feeding small diameter wire having a diameter less than 0.04 mm (16 mil) to a welding station includes a driving wheel for controllably applying a non-deforming driving force to the wire to move the free end of the wire towards the welding station; and a tension device such as a torque motor for constantly applying a reverse force to the wire in opposition to the driving force to keep the wire taut. 1 figure.

  11. Rotary sequencing valve with flexible port plate

    DOEpatents

    Wagner, Glenn Paul

    2005-05-10

    Rotary sequencing valve comprising a rotor having a rotor face rotatable about an axis perpendicular to the rotor face, wherein the rotor face has a plurality of openings, one or more of which are disposed at a selected radial distance from the axis, and wherein the rotor includes at least one passage connecting at least one pair of the plurality of openings. The valve includes a flexible port plate having a first side and a second side, wherein the first side faces the rotor and engages the rotor such that the flexible port plate can be rotated coaxially by the rotor and can move axially with respect to the rotor, wherein the flexible port plate has a plurality of ports between the first and second sides, which ports are aligned with the openings in the rotor face. The valve also includes a stator having a stator face disposed coaxially with the rotor and the flexible port plate, wherein the second side of the flexible port plate is in sealable, slidable rotary contact with the stator face, wherein the stator face has a plurality of openings, some of which are disposed at the selected radial distance from the axis, and wherein the plurality of openings extend as passages through the stator. The valve may be used in pressure or temperature swing adsorption systems.

  12. Ultra-efficient Engine Diameter Study

    NASA Technical Reports Server (NTRS)

    Daggett, David L.; Brown, Stephen T.; Kawai, Ron T.

    2003-01-01

    Engine fan diameter and Bypass Ratio (BPR) optimization studies have been conducted since the beginning of the turbofan age with the recognition that reducing the engine core jet velocity and increasing fan mass flow rate generally increases propulsive efficiency. However, performance tradeoffs limit the amount of fan flow achievable without reducing airplane efficiency. This study identifies the optimum engine fan diameter and BPR, given the advanced Ultra-Efficient Engine Technology (UEET) powerplant efficiencies, for use on an advanced subsonic airframe. Engine diameter studies have historically focused on specific engine size options, and were limited by existing technology and transportation infrastructure (e.g., ability to fit bare engines through aircraft doors and into cargo holds). This study is unique in defining the optimum fan diameter and drivers for future 2015 (UEET) powerplants while not limiting engine fan diameter by external constraints. This report follows on to a study identifying the system integration issues of UEET engines. This Engine Diameter study was managed by Boeing Phantom Works, Seattle, Washington through the NASA Glenn Revolutionary Aero Space Engine Research (RASER) contract under task order 10. Boeing Phantom Works, Huntington Beach, completed the engine/airplane sizing optimization, while the Boeing Commercial Airplane group (BCA) provided design oversight. A separate subcontract to support the overall project was issued to Tuskegee University.

  13. Porting Social Media Contributions with SIOC

    NASA Astrophysics Data System (ADS)

    Bojars, Uldis; Breslin, John G.; Decker, Stefan

    Social media sites, including social networking sites, have captured the attention of millions of users as well as billions of dollars in investment and acquisition. To better enable a user's access to multiple sites, portability between social media sites is required in terms of both (1) the personal profiles and friend networks and (2) a user's content objects expressed on each site. This requires representation mechanisms to interconnect both people and objects on the Web in an interoperable, extensible way. The Semantic Web provides the required representation mechanisms for portability between social media sites: it links people and objects to record and represent the heterogeneous ties that bind each to the other. The FOAF (Friend-of-a-Friend) initiative provides a solution to the first requirement, and this paper discusses how the SIOC (Semantically-Interlinked Online Communities) project can address the latter. By using agreed-upon Semantic Web formats like FOAF and SIOC to describe people, content objects, and the connections that bind them together, social media sites can interoperate and provide portable data by appealing to some common semantics. In this paper, we will discuss the application of Semantic Web technology to enhance current social media sites with semantics and to address issues with portability between social media sites. It has been shown that social media sites can serve as rich data sources for SIOC-based applications such as the SIOC Browser, but in the other direction, we will now show how SIOC data can be used to represent and port the diverse social media contributions (SMCs) made by users on heterogeneous sites.

  14. Metagenomic exploration of the bacterial community structure at Paradip Port, Odisha, India

    PubMed Central

    Pramanik, Arnab; Basak, Pijush; Banerjee, Satabdi; Sengupta, Sanghamitra; Chattopadhyay, Dhrubajyoti; Bhattacharyya, Maitree

    2015-01-01

    This is a pioneering report on the metagenomic exploration of the bacterial diversity from a busy sea port in Paradip, Odisha, India. In our study, high-throughput sequencing of community 16S rRNA gene amplicon was performed using 454 GS Junior platform. Metagenome contain 34,121 sequences with 16,677,333 bp and 56.3% G + C content. Metagenome sequences data are now available at NCBI under the Sequence Read Archive (SRA) database with accession no. SRX897055. Community metagenome sequence revealed the presence of 11,705 species belonging to 40 different phyla. Bacteroidetes (23%), Firmicutes (19%), Proteobacteria (17%), Spirochaetes (10%), Nitrospirae (8%), Actinobacteria (7%) and Acidobacteria (3%) are the predominant bacterial phyla in this port soil. Analysis of metagenomic sequences unfolded the interesting distribution of several phyla which pointed to the significant anthropogenic intervention influencing the bacterial community character of this port. PMID:26981374

  15. Accessibility Videos.

    PubMed

    Kurppa, Ari; Nordlund, Marika

    2016-01-01

    It can be difficult to understand accessibility, if you do not have the personal experience. The Accessibility Centre ESKE produced short videos which demonstrate the meaning of accessibility in different situations. Videos will raise accessibility awareness of architects, other planners and professionals in the construction field and maintenance. PMID:27534282

  16. 9 CFR 97.1 - Overtime work at laboratories, border ports, ocean ports, and airports. 1

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., animal semen, poultry, and hatching eggs see 9 CFR §§ 93.102, 93.203, 93.303, 93.403, 93.503, 93.703, and 93.805 and for designated ports of entry for certain purebred animals see 9 CFR §§ 151.1 through 151... ports, ocean ports, and airports. 1 97.1 Section 97.1 Animals and Animal Products ANIMAL AND...

  17. 9 CFR 97.1 - Overtime work at laboratories, border ports, ocean ports, and airports. 1

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., animal semen, poultry, and hatching eggs see 9 CFR §§ 93.102, 93.203, 93.303, 93.403, 93.503, 93.703, and 93.805 and for designated ports of entry for certain purebred animals see 9 CFR §§ 151.1 through 151... ports, ocean ports, and airports. 1 97.1 Section 97.1 Animals and Animal Products ANIMAL AND...

  18. 9 CFR 97.1 - Overtime work at laboratories, border ports, ocean ports, and airports. 1

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., animal semen, poultry, and hatching eggs see 9 CFR §§ 93.102, 93.203, 93.303, 93.403, 93.503, 93.703, and 93.805 and for designated ports of entry for certain purebred animals see 9 CFR §§ 151.1 through 151... ports, ocean ports, and airports. 1 97.1 Section 97.1 Animals and Animal Products ANIMAL AND...

  19. Collagen fibril diameter and leather strength.

    PubMed

    Wells, Hannah C; Edmonds, Richard L; Kirby, Nigel; Hawley, Adrian; Mudie, Stephen T; Haverkamp, Richard G

    2013-11-27

    The main structural component of leather and skin is type I collagen in the form of strong fibrils. Strength is an important property of leather, and the way in which collagen contributes to the strength is not fully understood. Synchrotron-based small angle X-ray scattering (SAXS) is used to measure the collagen fibril diameter of leather from a range of animals, including sheep and cattle, that had a range of tear strengths. SAXS data were fit to a cylinder model. The collagen fibril diameter and tear strength were found to be correlated in bovine leather (r(2) = 0.59; P = 0.009), with stronger leather having thicker fibrils. There was no correlation between orientation index, i.e., fibril alignment, and fibril diameter for this data set. Ovine leather showed no correlation between tear strength and fibril diameter, nor was there a correlation across a selection of other animal leathers. The findings presented here suggest that there may be a different structural motif in skin compared with tendon, particularly ovine skin or leather, in which the diameter of the individual fibrils contributes less to strength than fibril alignment does.

  20. Multi-port valve assembly

    DOEpatents

    Guggenheim, S. Frederic

    1986-01-01

    A multi-port fluid valve apparatus is used to control the flow of fluids through a plurality of valves and includes a web, which preferably is a stainless steel endless belt. The belt has an aperture therethrough and is progressed, under motor drive and control, so that its aperture is moved from one valve mechanism to another. Each of the valve mechanisms comprises a pair of valve blocks which are held in fluid-tight relationship against the belt. Each valve block consists of a block having a bore through which the fluid flows, a first seal surrounding the bore and a second seal surrounding the first seal, with the distance between the first and second seals being greater than the size of the belt aperture. In order to open a valve, the motor progresses the belt aperture to where it is aligned with the two bores of a pair of valve blocks, such alignment permitting a flow of the fluid through the valve. The valve is closed by movement of the belt aperture and its replacement, within the pair of valve blocks, by a solid portion of the belt.

  1. DiameterJ: A Validated Open Source Nanofiber Diameter Measurement Tool

    PubMed Central

    Hotaling, Nathan A.; Bharti, Kapil; Kriel, Haydn; Simon, Carl G.

    2015-01-01

    Despite the growing use of nanofiber scaffolds for tissue engineering applications, there is not a validated, readily available, free solution for rapid, automated analysis of nanofiber diameter from scanning electron microscope (SEM) micrographs. Thus, the goal of this study was to create a user friendly ImageJ/FIJI plugin that would analyze SEM micrographs of nanofibers to determine nanofiber diameter on a desktop computer within 60 seconds. Additional design goals included 1) compatibility with a variety of existing segmentation algorithms, and 2) an open source code to enable further improvement of the plugin. Using existing algorithms for centerline determination, Euclidean distance transforms and a novel pixel transformation technique, a plugin called “DiameterJ” was created for ImageJ/FIJI. The plugin was validated using 1) digital synthetic images of white lines on a black background and 2) SEM images of nominally monodispersed steel wires of known diameters. DiameterJ analyzed SEM micrographs in 20 seconds, produced diameters not statistically different from known values, was over 10-times closer to known diameter values than other open source software, provided hundreds of times the sampling of manual measurement, and was hundreds of times faster than manual assessment of nanofiber diameter. DiameterJ enables users to rapidly and thoroughly determine the structural features of nanofiber scaffolds and could potentially allow new insights to be formed into fiber diameter distribution and cell response. PMID:26043061

  2. DiameterJ: A validated open source nanofiber diameter measurement tool.

    PubMed

    Hotaling, Nathan A; Bharti, Kapil; Kriel, Haydn; Simon, Carl G

    2015-08-01

    Despite the growing use of nanofiber scaffolds for tissue engineering applications, there is not a validated, readily available, free solution for rapid, automated analysis of nanofiber diameter from scanning electron microscope (SEM) micrographs. Thus, the goal of this study was to create a user friendly ImageJ/FIJI plugin that would analyze SEM micrographs of nanofibers to determine nanofiber diameter on a desktop computer within 60 s. Additional design goals included 1) compatibility with a variety of existing segmentation algorithms, and 2) an open source code to enable further improvement of the plugin. Using existing algorithms for centerline determination, Euclidean distance transforms and a novel pixel transformation technique, a plugin called "DiameterJ" was created for ImageJ/FIJI. The plugin was validated using 1) digital synthetic images of white lines on a black background and 2) SEM images of nominally monodispersed steel wires of known diameters. DiameterJ analyzed SEM micrographs in 20 s, produced diameters not statistically different from known values, was over 10-times closer to known diameter values than other open source software, provided hundreds of times the sampling of manual measurement, and was hundreds of times faster than manual assessment of nanofiber diameter. DiameterJ enables users to rapidly and thoroughly determine the structural features of nanofiber scaffolds and could potentially allow new insights to be formed into fiber diameter distribution and cell response.

  3. DiameterJ: A validated open source nanofiber diameter measurement tool.

    PubMed

    Hotaling, Nathan A; Bharti, Kapil; Kriel, Haydn; Simon, Carl G

    2015-08-01

    Despite the growing use of nanofiber scaffolds for tissue engineering applications, there is not a validated, readily available, free solution for rapid, automated analysis of nanofiber diameter from scanning electron microscope (SEM) micrographs. Thus, the goal of this study was to create a user friendly ImageJ/FIJI plugin that would analyze SEM micrographs of nanofibers to determine nanofiber diameter on a desktop computer within 60 s. Additional design goals included 1) compatibility with a variety of existing segmentation algorithms, and 2) an open source code to enable further improvement of the plugin. Using existing algorithms for centerline determination, Euclidean distance transforms and a novel pixel transformation technique, a plugin called "DiameterJ" was created for ImageJ/FIJI. The plugin was validated using 1) digital synthetic images of white lines on a black background and 2) SEM images of nominally monodispersed steel wires of known diameters. DiameterJ analyzed SEM micrographs in 20 s, produced diameters not statistically different from known values, was over 10-times closer to known diameter values than other open source software, provided hundreds of times the sampling of manual measurement, and was hundreds of times faster than manual assessment of nanofiber diameter. DiameterJ enables users to rapidly and thoroughly determine the structural features of nanofiber scaffolds and could potentially allow new insights to be formed into fiber diameter distribution and cell response. PMID:26043061

  4. 7 CFR 352.9 - Ports.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... specified in the Customs Regulations in 19 CFR 1.1 and 19 CFR 6.13, and Agana, Guam, or such other ports as... possession of plants, plant products, plant pests, noxious weeds, soil, or other products or articles...

  5. 7 CFR 352.9 - Ports.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... specified in the Customs Regulations in 19 CFR 1.1 and 19 CFR 6.13, and Agana, Guam, or such other ports as... possession of plants, plant products, plant pests, noxious weeds, soil, or other products or articles...

  6. 7 CFR 352.9 - Ports.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... specified in the Customs Regulations in 19 CFR 1.1 and 19 CFR 6.13, and Agana, Guam, or such other ports as... possession of plants, plant products, plant pests, noxious weeds, soil, or other products or articles...

  7. 7 CFR 352.9 - Ports.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... specified in the Customs Regulations in 19 CFR 1.1 and 19 CFR 6.13, and Agana, Guam, or such other ports as... possession of plants, plant products, plant pests, noxious weeds, soil, or other products or articles...

  8. 50 CFR 14.12 - Designated ports.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) New York, New York. (o) Portland, Oregon. (p) San Francisco, California. (q) Seattle, Washington. ..., POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS IMPORTATION, EXPORTATION, AND TRANSPORTATION OF WILDLIFE Importation and Exportation at Designated Ports §...

  9. Medi-Port Pilot Randomized Controlled Trial

    ClinicalTrials.gov

    2016-10-13

    Actively Undergoing Cancer Treatment; 4-9 Years of Age; At Least 1 Month From Diagnosis; Able to Speak and Understand English; Presenting to Clinic for at Least a 2nd Subcutaneous Port Needle Insertion

  10. 33 CFR 6.01-3 - Captain of the Port.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Captain of the Port. 6.01-3... Port. Captain of the Port as used in this part, means the officer of the Coast Guard, under the command... Commander shall be Captain of the Port with respect to remaining areas in his District not assigned...

  11. 33 CFR 125.05 - Captain of the Port.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Captain of the Port. 125.05... VESSELS § 125.05 Captain of the Port. The term Captain of the Port means the officer of the Coast Guard... immediate direction to Coast Guard law enforcement activities within the general proximity of the port...

  12. 33 CFR 1.01-30 - Captains of the Port.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Captains of the Port. 1.01-30... GENERAL PROVISIONS Delegation of Authority § 1.01-30 Captains of the Port. Captains of the Port and their representatives enforce within their respective areas port safety and security and marine environmental...

  13. 33 CFR 6.01-3 - Captain of the Port.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Captain of the Port. 6.01-3... Port. Captain of the Port as used in this part, means the officer of the Coast Guard, under the command... Commander shall be Captain of the Port with respect to remaining areas in his District not assigned...

  14. 33 CFR 80.1120 - Port Hueneme, CA.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Port Hueneme, CA. 80.1120 Section... NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Coast § 80.1120 Port Hueneme, CA. (a) A line drawn from Port Hueneme East Jetty Light 4 to Port Hueneme West Jetty Light 3....

  15. 33 CFR 1.01-30 - Captains of the Port.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Captains of the Port. 1.01-30... GENERAL PROVISIONS Delegation of Authority § 1.01-30 Captains of the Port. Captains of the Port and their representatives enforce within their respective areas port safety and security and marine environmental...

  16. 33 CFR 125.05 - Captain of the Port.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Captain of the Port. 125.05... VESSELS § 125.05 Captain of the Port. The term Captain of the Port means the officer of the Coast Guard... immediate direction to Coast Guard law enforcement activities within the general proximity of the port...

  17. Assessment of Ports for Offshore Wind Development in the United States

    SciTech Connect

    Elkinton, Chris; Blatiak, Alicia; Ameen, Hafsa

    2014-03-21

    As offshore wind energy develops in the United States, port facilities will become strategic hubs in the offshore wind farm supply chain because all plant and transport logistics must transit through these facilities. Therefore, these facilities must provide suitable infrastructure to meet the specific requirements of the offshore wind industry. As a result, it is crucial that federal and state policy-makers and port authorities take effective action to position ports in the offshore wind value chain to take best advantage of their economic potential. The U.S. Department of Energy tasked the independent consultancy GL Garrad Hassan (GL GH) with carrying out a review of the current capability of U.S. ports to support offshore wind project development and an assessment of the challenges and opportunities related to upgrading this capability to support the growth of as many as 54 gigawatts of offshore wind installed in U.S. waters by 2030. The GL GH report and the open-access web-based Ports Assessment Tool resulting from this study will aid decision-makers in making informed decisions regarding the choice of ports for specific offshore projects, and the types of investments that would be required to make individual port facilities suitable to serve offshore wind manufacturing, installation and/or operations. The offshore wind industry in the United States is still in its infancy and this study finds that additional port facilities capable of supporting offshore wind projects are needed to meet the anticipated project build-out by 2030; however, no significant barriers exist to prevent the development of such facilities. Furthermore, significant port capabilities are in place today with purpose-build port infrastructure currently being built. While there are currently no offshore wind farms operating in the United States, much of the infrastructure critical to the success of such projects does exist, albeit in the service of other industries. This conclusion is based

  18. Submicron diameter single crystal sapphire optical fiber

    SciTech Connect

    Hill, Cary; Homa, Daniel; Liu, Bo; Yu, Zhihao; Wang, Anbo; Pickrell, Gary

    2014-10-02

    In this work, a submicron-diameter single crystal sapphire optical fiber was demonstrated via wet acid etching at elevated temperatures. Etch rates on the order 2.3 µm/hr were achievable with a 3:1 molar ratio sulfuric-phosphoric acid solution maintained at a temperature of 343°C. A sapphire fiber with an approximate diameter of 800 nm was successfully fabricated from a commercially available fiber with an original diameter of 50 µm. The simple and controllable etching technique provides a feasible approach to the fabrication of unique waveguide structures via traditional silica masking techniques. The ability to tailor the geometry of sapphire optical fibers is the first step in achieving optical and sensing performance on par with its fused silica counterpart.

  19. Submicron diameter single crystal sapphire optical fiber

    DOE PAGES

    Hill, Cary; Homa, Daniel; Liu, Bo; Yu, Zhihao; Wang, Anbo; Pickrell, Gary

    2014-10-02

    In this work, a submicron-diameter single crystal sapphire optical fiber was demonstrated via wet acid etching at elevated temperatures. Etch rates on the order 2.3 µm/hr were achievable with a 3:1 molar ratio sulfuric-phosphoric acid solution maintained at a temperature of 343°C. A sapphire fiber with an approximate diameter of 800 nm was successfully fabricated from a commercially available fiber with an original diameter of 50 µm. The simple and controllable etching technique provides a feasible approach to the fabrication of unique waveguide structures via traditional silica masking techniques. The ability to tailor the geometry of sapphire optical fibers ismore » the first step in achieving optical and sensing performance on par with its fused silica counterpart.« less

  20. Shaft Diameter Measurement Using Structured Light Vision

    PubMed Central

    Liu, Siyuan; Tan, Qingchang; Zhang, Yachao

    2015-01-01

    A method for measuring shaft diameters is presented using structured light vision measurement. After calibrating a model of the structured light measurement, a virtual plane is established perpendicular to the measured shaft axis and the image of the light stripe on the shaft is projected to the virtual plane. On the virtual plane, the center of the measured shaft is determined by fitting the projected image under the geometrical constraints of the light stripe, and the shaft diameter is measured by the determined center and the projected image. Experiments evaluated the measuring accuracy of the method and the effects of some factors on the measurement are analyzed. PMID:26274963

  1. Fabrication of 10nm diameter carbon nanopores

    SciTech Connect

    Radenovic, Aleksandra; Trepagnier, Eliane; Csencsits, Roseann; Downing, Kenneth H; Liphardt, Jan

    2008-09-25

    The addition of carbon to samples, during imaging, presents a barrier to accurate TEM analysis, the controlled deposition of hydrocarbons by a focused electron beam can be a useful technique for local nanometer-scale sculpting of material. Here we use hydrocarbon deposition to form nanopores from larger focused ion beam (FIB) holes in silicon nitride membranes. Using this method, we close 100-200nm diameter holes to diameters of 10nm and below, with deposition rates of 0.6nm per minute. I-V characteristics of electrolytic flow through these nanopores agree quantitatively with a one dimensional model at all examined salt concentrations.

  2. Klonos: A Similarity Analysis Based Tool for Software Porting

    2014-07-30

    The Klonos is a compiler-based tool that can help users for scientific application porting. The tool is based on the similarity analysis with the help of the OpenUH compiler (a branch of Open64 compiler). This tool combines syntactic and cost-model-provided metrics clusters, which aggregate similar subroutines that can be ported similarity. The generated porting plan, which allows programmers and compilers to reuse porting experience as much as possible during the porting process.

  3. Influence of tube's diameter on boiling heat transfer performance in small diameter tubes

    NASA Astrophysics Data System (ADS)

    Gan, Chengjun; Wang, Weicheng; Zhang, Lining

    1998-03-01

    This paper reports the experiments of evaporation study in 6 mm inner copper diameter tubes using HFC-134a, HCFC-22 and CFC-12 as working fluid. The results show that the evaporation heat transfer coefficient increases with the decreasing of inner diameter of tubes. A new concept of non-dimensional tube diameter U is proposed in this paper for correction of the influence of the tube diameter on the evaporation heat transfer coefficient. And further, a convenient empirical correction method is presented.

  4. Precision distances with spiral galaxy apparent diameters

    NASA Astrophysics Data System (ADS)

    Steer, Ian

    2016-01-01

    Spiral galaxy diameters offer the oldest extragalactic distance indicator known. Although outdated and hitherto imprecise, two spiral diameter-based distance indicators applied in the 1980s can be tested, calibrated, and re-established for precision era use, based on abundant redshift-independent distances data available in NED-D. Indicator one employs the largest Giant Spiral Galaxies, which have an absolute isophotal major diameter of ~70 +/- 10 kpc, offering standard ruler-based distances with <10% precision. Indicator two employs the diameter-magnitude relation for spirals in general, as a secondary indicator, offering ~20% precision. The ruler-based indicator is the only indicator with <10% precision able to independently calibrate type Ia supernovae-based distances at cosmological distances. The secondary-based indicator is the only indicator with 20% precision applicable to more galaxies than in current Tully-Fisher surveys. The primary indicator gives researchers a new tool to confirm or refute if, as currently believed, universal expansion is accelerating. The secondary indicator gives researchers a new path toward acquiring a more complete 3D picture of the local universe and potentially, because the majority of galaxies in the universe are spirals, the distant universe.

  5. 7 CFR 51.587 - Diameter.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Diameter. 51.587 Section 51.587 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF...

  6. 7 CFR 51.587 - Diameter.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Diameter. 51.587 Section 51.587 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF...

  7. 7 CFR 51.320 - Diameter.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Standards for Grades of Apples Definitions § 51.320 Diameter. When measuring for minimum size, “diameter” means the greatest dimension of the apple measured at right angles to a line from stem to blossom end. When measuring for maximum size, “diameter” means the smallest dimension of the apple determined...

  8. 7 CFR 51.320 - Diameter.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Definitions § 51.320 Diameter. When measuring for minimum size, “diameter” means the greatest dimension of the apple measured at right angles to... dimension of the apple determined by passing the apple through a round opening in any position....

  9. 7 CFR 51.320 - Diameter.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Standards for Grades of Apples Definitions § 51.320 Diameter. When measuring for minimum size, “diameter” means the greatest dimension of the apple measured at right angles to a line from stem to blossom end. When measuring for maximum size, “diameter” means the smallest dimension of the apple determined...

  10. 7 CFR 51.320 - Diameter.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Definitions § 51.320 Diameter. When measuring for minimum size, “diameter” means the greatest dimension of the apple measured at right angles to... dimension of the apple determined by passing the apple through a round opening in any position....

  11. Slug flow in a large diameter pipe

    SciTech Connect

    Crowley, C.J.; Sam, R.G.; Wallis, G.B.; Mehta, D.C.

    1985-01-01

    Experimental and anlytical results are presented for two-phase slug flow in a transparent, large diameter pipe (6.75 inches ID) at high gas density. Slug characteristics of velocity, length, frequency, carpet profile and carpet velocity, as well as pressure drop, have been measured and compared with correlations and mechanistic models.

  12. Changing the Diameter of a Viewing Tube

    ERIC Educational Resources Information Center

    Obara, Samuel

    2009-01-01

    This article is about the students' investigation about the relationship between the diameter of the view tubes (x) of constant lengths and the viewable vertical distance (y) on the wall while keeping the perpendicular distance from the eyeball to the wall constant. The students collected data and used and represented it in tabular and graphical…

  13. Remote access thyroid surgery

    PubMed Central

    Bhatia, Parisha; Mohamed, Hossam Eldin; Kadi, Abida; Walvekar, Rohan R.

    2015-01-01

    Robot assisted thyroid surgery has been the latest advance in the evolution of thyroid surgery after endoscopy assisted procedures. The advantage of a superior field vision and technical advancements of robotic technology have permitted novel remote access (trans-axillary and retro-auricular) surgical approaches. Interestingly, several remote access surgical ports using robot surgical system and endoscopic technique have been customized to avoid the social stigma of a visible scar. Current literature has displayed their various advantages in terms of post-operative outcomes; however, the associated financial burden and also additional training and expertise necessary hinder its widespread adoption into endocrine surgery practices. These approaches offer excellent cosmesis, with a shorter learning curve and reduce discomfort to surgeons operating ergonomically through a robotic console. This review aims to provide details of various remote access techniques that are being offered for thyroid resection. Though these have been reported to be safe and feasible approaches for thyroid surgery, further evaluation for their efficacy still remains. PMID:26425450

  14. 76 FR 52269 - Safety Zone; Port Huron Float Down, St. Clair River, Port Huron, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-22

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Port Huron Float Down, St. Clair River... Port Huron Float Down. Though this is an unsanctioned, non-permitted event, this temporary safety zone... float-down events. DATES: This rule is effective and will be enforced from 12 to 8 p.m. on August...

  15. Abdominal anatomy in the context of port placement and trocars

    PubMed Central

    Alkatout, Ibrahim; Mettler, Liselotte; Maass, Nicolai; Noé, Günter-Karl; Elessawy, Mohamed

    2015-01-01

    Although the anatomy of the human being has not changed, technical developments in operating materials and methods demand a simultaneous development in operative management. Developments in electronic and optical technologies permit many gynecological operations to be performed laparoscopically. One fundamental distinction between any other operating method and laparoscopy is the hurdle that the initial entry, whether with a needle, cannula, or trocar, is mostly performed blind. However, there is a risk that blind entry may result in vascular or organ damage. One of the difficulties associated with entry complications is that any damage may not be immediately recognized, leading to major abdominal reparative surgery, and at worst, a temporary colostomy. Therefore, the technical and operative quality of laparoscopic surgery begins with port placement and trocars. Visual access systems are available but are not yet widely used. The aim of this review was to introduce the different port placement and trocar systems as well as their correct and professional usage in correlation with the abdominal functional anatomy. PMID:26692776

  16. 19 CFR 4.86 - Intercoastal residue-cargo procedure; optional ports.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... ports. 4.86 Section 4.86 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... Intercoastal residue—cargo procedure; optional ports. (a) When a vessel arrives at an Atlantic or Pacific coast port from a foreign port or ports with residue cargo for delivery at a port or ports on the...

  17. Computer vector multiprocessing control with multiple access memory and priority conflict resolution method

    SciTech Connect

    Chen, S.S.; Schiffleger, A.J.

    1990-02-13

    This patent describes a multiprocessor memory system. It comprises: a central memory comprised of a plurality of independently addressable memory banks organized into a plurality of sections each accessible through a plurality of access paths; a plurality of processing machines; each of the processing machine including a plurality of ports for generating memory references to any one of the central memory sections; and conflict resolution means interfacing each of the ports to each of the central memory sections through the central memory access paths. The resolution means for receiving references from the ports and coordinating and controlling the procession of the references along to the access paths. The conflict resolution means comprising a plurality of conflict resolution circuits corresponding in number to the memory sections, each of the circuits receiving the references to its corresponding section from any one of the ports and selectively conveying the references to the access paths for the corresponding section. The circuits each including; means for checking the readiness of the memory banks to be referenced and holding a reference to a busy one of the banks until the bank is ready to be referenced; means for detecting when more than one of the references is pending to the same bank simultaneously and holding all but one of the simultaneously pending references; and means communicating with the ports and the other of the conflict resolution circuits to cause one of the ports referencing the memory to suspend generation of further references when a reference from the referencing port is being held.

  18. 33 CFR 165.1327 - Security Zone; escorted U.S. Navy submarines in Sector Seattle Captain of the Port Zone.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... defined in 33 CFR Section 3.65-10, and is being escorted by the Coast Guard. (b) Regulations. In... NAVIGATION AREAS AND LIMITED ACCESS AREAS Specific Regulated Navigation Areas and Limited Access Areas... Captain of the Port Zone. (a) Location. The following area is a security zone: All waters within...

  19. 33 CFR 165.1327 - Security Zone; escorted U.S. Navy submarines in Sector Seattle Captain of the Port Zone.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., as defined in 33 CFR Section 3.65-10, and is being escorted by the Coast Guard. (b) Regulations. In... NAVIGATION AREAS AND LIMITED ACCESS AREAS Specific Regulated Navigation Areas and Limited Access Areas... Captain of the Port Zone. (a) Location. The following area is a security zone: All waters within...

  20. 33 CFR 165.1327 - Security Zone; escorted U.S. Navy submarines in Sector Seattle Captain of the Port Zone.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., as defined in 33 CFR Section 3.65-10, and is being escorted by the Coast Guard. (b) Regulations. In... NAVIGATION AREAS AND LIMITED ACCESS AREAS Specific Regulated Navigation Areas and Limited Access Areas... Captain of the Port Zone. (a) Location. The following area is a security zone: All waters within...

  1. Coke from small-diameter tubes analyzed

    SciTech Connect

    Albright, L.F.

    1988-08-29

    The mechanism for coke deposit formation and the nature of the coke itself can vary with the design of the ethylene furnace tube bank. In this article, coke deposits from furnaces with small-diameter pyrolysis tubes are examined. The samples were taken from four furnaces of identical design (Plant B). As in both the first and second installments of the series, the coke deposits were examined using a scanning electron microscope (SEM) and an energy dispersive X-ray analyzer (EDAX). The deposits from the small-diameter tubes are compared with the coke deposits from the furnace discussed in earlier articles. Analysis of the coke in both sets of samples are then used to offer recommendations for improved decoking procedures, operating procedures, better feed selection, and better selection of the metallurgy used in furnace tubes, to extend the operating time of the furnace tubes by reducing the amount and type of coke build up.

  2. Small diameter, deep bore optical inspection system

    DOEpatents

    Lord, D.E.; Petrini, R.R.; Carter, G.W.

    An improved rod optic system for inspecting small diameter, deep bores is described. The system consists of a rod optic system utilizing a curved mirror at the end of the rod lens such that the optical path through the system is bent 90/sup 0/ to minimize optical distortion in examing the sides of a curved bore. The system is particularly useful in the examination of small bores for corrosion, and is capable if examing 1/16 inch diameter and up to 4-inch deep drill holes, for example. The positioning of the curved mirror allows simultaneous viewing from shallow and righ angle points of observation of the same artifact (such as corrosion) in the bore hole. The improved rod optic system may be used for direct eye sighting, or in combination with a still camera or a low-light television monitor; particularly low-light color television.

  3. Small diameter, deep bore optical inspection system

    DOEpatents

    Lord, David E.; Petrini, Richard R.; Carter, Gary W.

    1981-01-01

    An improved rod optic system for inspecting small diameter, deep bores. The system consists of a rod optic system utilizing a curved mirror at the end of the rod lens such that the optical path through the system is bent 90.degree. to minimize optical distortion in examining the sides of a curved bore. The system is particularly useful in the examination of small bores for corrosion, and is capable of examining 1/16 inch diameter and up to 4 inch deep drill holes, for example. The positioning of the curved mirror allows simultaneous viewing from shallow and right angle points of observation of the same artifact (such as corrosion) in the bore hole. The improved rod optic system may be used for direct eye sighting, or in combination with a still camera or a low-light television monitor; particularly low-light color television.

  4. On finding minimum-diameter clique trees

    SciTech Connect

    Blair, J.R.S. . Dept. of Computer Science); Peyton, B.W. )

    1991-08-01

    It is well-known that any chordal graph can be represented as a clique tree (acyclic hypergraph, join tree). Since some chordal graphs have many distinct clique tree representations, it is interesting to consider which one is most desirable under various circumstances. A clique tree of minimum diameter (or height) is sometimes a natural candidate when choosing clique trees to be processed in a parallel computing environment. This paper introduces a linear time algorithm for computing a minimum-diameter clique tree. The new algorithm is an analogue of the natural greedy algorithm for rooting an ordinary tree in order to minimize its height. It has potential application in the development of parallel algorithms for both knowledge-based systems and the solution of sparse linear systems of equations. 31 refs., 7 figs.

  5. Detection and response to unauthorized access to a communication device

    DOEpatents

    Smith, Rhett; Gordon, Colin

    2015-09-08

    A communication gateway consistent with the present disclosure may detect unauthorized physical or electronic access and implement security actions in response thereto. A communication gateway may provide a communication path to an intelligent electronic device (IED) using an IED communications port configured to communicate with the IED. The communication gateway may include a physical intrusion detection port and a network port. The communication gateway may further include control logic configured to evaluate physical intrusion detection signal. The control logic may be configured to determine that the physical intrusion detection signal is indicative of an attempt to obtain unauthorized access to one of the communication gateway, the IED, and a device in communication with the gateway; and take a security action based upon the determination that the indication is indicative of the attempt to gain unauthorized access.

  6. Lasing in microdisks of ultrasmall diameter

    SciTech Connect

    Zhukov, A. E. Kryzhanovskaya, N. V.; Maximov, M. V.; Lipovskii, A. A.; Savelyev, A. V.; Bogdanov, A. A.; Shostak, I. I.; Moiseev, E. I.; Karpov, D. V.; Laukkanen, J.; Tommila, J.

    2014-12-15

    It is demonstrated by calculations and experimental results that room-temperature lasing can be obtained at the ground-state optical transition of InAs/InGaAs/GaAs quantum dots in optical microcavities with a record-small diameter of 1.5 μm. In 1-μm cavities, lasing occurs at the wavelength of one of the whispering-gallery modes within the band corresponding to the first excited-state optical transition.

  7. Dual port memory based Heapsort implementation for FPGA

    NASA Astrophysics Data System (ADS)

    Zabołotny, Wojciech M.

    2011-10-01

    This document presents a proposal of implementation of the Heapsort algorithm, which utilizes hardware features of modern Field-Programmable Gate Array (FPGA) chips, such as dual port random access memories (DP RAM), to implement efficient sorting of a data stream. The implemented sorter is able to sort one data record every two clock periods. This throughput does not depend on the capacity of the sorter (defined as number of storage cells in the sorter). The mean latency (expressed in sorting cycles - each equal to two clock periods) when sorting the stream of data is equal to the capacity of the sorter. Due to efficient use of FPGA resources (e.g. data are stored mainly in internal block RAMs), the complexity of the sorter is proportional to the logarithm of sorter capacity. Only the required RAM size is linearly proportional to the sorter capacity. The proposed sorter has been tested in simulations and synthesized for real FPGA chips to verify its correctness.

  8. Diameter-dependent hydrophobicity in carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Kyakuno, Haruka; Fukasawa, Mamoru; Ichimura, Ryota; Matsuda, Kazuyuki; Nakai, Yusuke; Miyata, Yasumitsu; Saito, Takeshi; Maniwa, Yutaka

    2016-08-01

    Single-wall carbon nanotubes (SWCNTs) are a good model system that provides atomically smooth nanocavities. It has been reported that water-SWCNTs exhibit hydrophobicity depending on the temperature T and the SWCNT diameter D. SWCNTs adsorb water molecules spontaneously in their cylindrical pores around room temperature, whereas they exhibit a hydrophilic-hydrophobic transition or wet-dry transition (WDT) at a critical temperature Twd ≈ 220-230 K and above a critical diameter Dc ≈ 1.4-1.6 nm. However, details of the WDT phenomenon and its mechanism remain unknown. Here, we report a systematic experimental study involving X-ray diffraction, optical microscopy, and differential scanning calorimetry. It is found that water molecules inside thick SWCNTs (D > Dc) evaporate and condense into ice Ih outside the SWCNTs at Twd upon cooling, and the ice Ih evaporates and condenses inside the SWCNTs upon heating. On the other hand, residual water trapped inside the SWCNTs below Twd freezes. Molecular dynamics simulations indicate that upon lowering T, the hydrophobicity of thick SWCNTs increases without any structural transition, while the water inside thin SWCNTs (D < Dc) exhibits a structural transition, forming an ordered ice. This ice has a well-developed hydrogen bonding network adapting to the cylindrical pores of the SWCNTs. Thus, the unusual diameter dependence of the WDT is attributed to the adaptability of the structure of water to the pore dimension and shape.

  9. LAPAROSCOPIC SALPINGECTOMY IN TWO CAPTIVE LEOPARDS (PANTHERA PARDUS) USING A SINGLE PORTAL ACCESS SYSTEM.

    PubMed

    Hartman, Marthinus J; Monnet, Eric; Kirberger, Robert M; Schoeman, Johan P

    2015-12-01

    Laparoscopic salpingectomy was performed in two adult leopards (Panthera pardus) using a single portal access system, with a multicannulated single-incision laparoscopic surgery port, without any complications. The poorly developed ovarian bursa provided easy access to the uterine tube for salpingectomy. Laparoscopic salpingectomy can be safely performed in the leopard using a single portal access system.

  10. LAPAROSCOPIC SALPINGECTOMY IN TWO CAPTIVE LEOPARDS (PANTHERA PARDUS) USING A SINGLE PORTAL ACCESS SYSTEM.

    PubMed

    Hartman, Marthinus J; Monnet, Eric; Kirberger, Robert M; Schoeman, Johan P

    2015-12-01

    Laparoscopic salpingectomy was performed in two adult leopards (Panthera pardus) using a single portal access system, with a multicannulated single-incision laparoscopic surgery port, without any complications. The poorly developed ovarian bursa provided easy access to the uterine tube for salpingectomy. Laparoscopic salpingectomy can be safely performed in the leopard using a single portal access system. PMID:26667558

  11. Web Accessibility and Accessibility Instruction

    ERIC Educational Resources Information Center

    Green, Ravonne A.; Huprich, Julia

    2009-01-01

    Section 508 of the Americans with Disabilities Act (ADA) mandates that programs and services be accessible to people with disabilities. While schools of library and information science (SLIS*) and university libraries should model accessible Web sites, this may not be the case. This article examines previous studies about the Web accessibility of…

  12. Porting salinas to the windows platform.

    SciTech Connect

    Reese, Garth M.; Wilson, Christopher Riley

    2006-06-01

    The ASC program has enabled significant development of high end engineering applications on massively parallel machines. There is a great benefit in providing these applications on the desktop of the analysts and designers, at least insofar as the small models may be run on these platforms, thus providing a tool set that spans the application needs. This effort documents the work of porting Salinas to the WINDOWS{trademark} platform. Selection of the tools required to compile, link, test and run Salinas in this environment is discussed. Significant problems encountered along the way are listed along with an estimation of the overall cost of the port. This report may serve as a baseline for streamlining further porting activities with other ASC codes.

  13. Photodynamic therapy for port wine stains

    NASA Astrophysics Data System (ADS)

    Li, Junheng

    1998-11-01

    Previous therapies for port wine stains usually cause unacceptable scarring or obtain poor effect. Because port wine is a congenital vasculopathy consisting of an abnormal network of capillaries in the upper dermis with an overlying normal epidermis and the researchers found the tumor blood vessels were occluded accompanying the necrosis of the tumor after PDT. The author and his colleagues started a series of animal and clinical studies since 1991 about photodynamic therapy for port wine stain an they established the method of PDT for PWS. The clinical studies of over 1500 cases proved that PWS can be cured by PDT without scar formation because there is no thermal effect involved. No relapse was found within a maximum follow-up of six years.

  14. Mini-access for retroperitoneal laparoscopy.

    PubMed

    Gaur, D D; Gopichand, M; Dubey, M; Jhunjhunwala, V

    2002-10-01

    The purpose of this study was to establish the feasibility of primary mini-access to the retroperitoneal space to perform certain retroperitoneoscopic procedures in which an enlarged port is not required for extraction of the specimen. Mini-laparoscopy or needlescopic laparoscopy has been performed in the past via the transperitoneal route, but this has not yet been reported for a retroperitoneoscopic procedure. Through a 5-mm primary access and 3- or 5-mm secondary ports, retroperitoneoscopic surgery was performed in seven adults for ureterolithotomy, renal biopsy, simple nephrectomy, nephropexy, cyst decortication, or drainage of a subphrenic abscess. The access technique used was a mini-version of a previously described percutaneous access technique with some modifications. The retroperitoneoscopic procedure was successful in all seven patients, and no complications developed. The operative time, blood loss, analgesic intake, and length of hospital stay were comparable with those of a standard retroperitoneoscopic procedure. However, the cosmetic results were better. Mini-retroperitoneoscopy is feasible and is a better alternative for patients in whom the whole procedure can be performed through 5-mm or smaller ports.

  15. Subclavian Vein Versus Arm Vein for Totally Implantable Central Venous Port for Patients with Head and Neck Cancer: A Retrospective Comparative Analysis

    SciTech Connect

    Akahane, Akio Sone, Miyuki; Ehara, Shigeru; Kato, Kenichi; Tanaka, Ryoichi; Nakasato, Tatsuhiko

    2011-12-15

    Purpose: This study was designed to compare central venous ports (CVP) from two different routes of venous access-the subclavian vein and arm vein-in terms of safety for patients with head and neck cancer (HNC). Methods: Patients with HNC who underwent image-guided implantations of CVPs were retrospectively evaluated. All CVPs were implanted under local anesthesia. Primary outcome measurements were rates and types of adverse events (AEs). Secondary outcomes included technical success and rate and reason of CVP removal. Results: A total of 162 patients (subclavian port group, 47; arm port group, 115) were included in this study. Technical success was achieved in all patients. The median follow-up period was 94 (range, 1-891) days. Two patients in the subclavian port group experienced periprocedural complications. Postprocedural AEs were observed in 8.5 and 22.6% of the subclavian port and arm port group patients, respectively (P = 0.044). Phlebitis and system occlusions were observed only in the arm port group. The rate of infection was not significantly different between the two groups. The CVP was removed in 34 and 39.1% of the subclavian port and arm port patients, respectively. Conclusions: Both subclavian and arm CVPs are feasible in patients with HNC. AEs were more frequent in the arm port group; thus, the arm port is not recommended as the first choice for patients with HNC. However, further experience is needed to improve the placement technique and the maintenance of CVPs and a prospective analysis is warranted.

  16. Port Graham Community Building Biomass Heating Design Project

    SciTech Connect

    Norman, Patrick; Sink, Charles

    2015-04-30

    Native Village of Port Graham completed preconstruction activities to prepare for construction and operations of a cord wood biomass heating system to five or more community buildings in Port Graham, Alaska. Project Description Native Village of Port Graham (NVPG) completed preconstruction activities that pave the way towards reduced local energy costs through the construction and operations of a cord wood biomass heating system. NVPG plans include installation of a GARN WHS 3200 Boiler that uses cord wood as fuel source. Implementation of the 700,000 Btu per hour output biomass community building heat utility would heat 5-community buildings in Port Graham, Alaska. Heating system is estimated to displace 85% of the heating fuel oil or 5365 gallons of fuel on an annual basis with an estimated peak output of 600,000 Btu per hour. Estimated savings is $15,112.00 per year. The construction cost estimate made to install the new biomass boiler system is estimated $251,693.47 with an additional Boiler Building expansion cost estimated at $97,828.40. Total installed cost is estimated $349,521.87. The WHS 3200 Boiler would be placed inside a new structure at the old community Water Plant Building site that is controlled by NVPG. Design of the new biomass heat plant and hot water loop system was completed by Richmond Engineering, NVPG contractor for the project. A hot water heat loop system running off the boiler is designed to be placed underground on lands controlled by NVPG and stubbed to feed hot water to existing base board heating system in the following community buildings: 1. Anesia Anahonak Moonin Health and Dental Clinic 2. Native Village of Port Graham offices 3. Port Graham Public Safety Building/Fire Department 4. Port Graham Corporation Office Building which also houses the Port Graham Museum and Head Start Center 5. North Pacific Rim Housing Authority Workshop/Old Fire Hall Existing community buildings fuel oil heating systems are to be retro-fitted to

  17. Long-term catheterization: current approaches in the diagnosis and treatment of port-related infections.

    PubMed

    Bustos, Cesar; Aguinaga, Aitziber; Carmona-Torre, Francisco; Del Pozo, Jose Luis

    2014-01-01

    Since the first description in 1982, totally implanted venous access ports have progressively improved patients' quality of life and medical assistance when a medical condition requires the use of long-term venous access. Currently, they are part of the standard medical care for oncohematologic patients. However, apart from mechanical and thrombotic complications, there are also complications associated with biofilm development inside the catheters. These biofilms increase the cost of medical assistance and extend hospitalization. The most frequently involved micro-organisms in these infections are gram-positive cocci. Many efforts have been made to understand biofilm formation within the lumen catheters, and to resolve catheter-related infection once it has been established. Apart from systemic antibiotic treatment, the use of local catheter treatment (ie, antibiotic lock technique) is widely employed. Many different antimicrobial options have been tested, with different outcomes, in clinical and in in vitro assays. The stability of antibiotic concentration in the lock solution once instilled inside the catheter lumen remains unresolved. To prevent infection, it is mandatory to perform hand hygiene before catheter insertion and manipulation, and to disinfect catheter hubs, connectors, and injection ports before accessing the catheter. At present, there are still unresolved questions regarding the best antimicrobial agent for catheter-related bloodstream infection treatment and the duration of concentration stability of the antibiotic solution within the lumen of the port. PMID:24570595

  18. Laser treatment of port-wine stains

    PubMed Central

    Brightman, Lori A; Geronemus, Roy G; Reddy, Kavitha K

    2015-01-01

    Port-wine stains are a type of capillary malformation affecting 0.3% to 0.5% of the population. Port-wine stains present at birth as pink to erythematous patches on the skin and/or mucosa. Without treatment, the patches typically darken with age and may eventually develop nodular thickening or associated pyogenic granuloma. Laser and light treatments provide improvement through selective destruction of vasculature. A variety of vascular-selective lasers may be employed, with the pulsed dye laser being the most common and well studied. Early treatment produces more optimal results. Advances in imaging and laser treatment technologies demonstrate potential to further improve clinical outcomes. PMID:25624768

  19. Charging for port reception facilities in North Sea ports: putting theory into practice.

    PubMed

    Carpenter, A; Macgill, S

    2001-04-01

    The aim of this paper is to evaluate the charging systems for the use of port reception facilities for waste oil, and to examine the potential impact of the charging elements of the new (late 2000) EU Directive on port reception facilities for ship-generated waste and cargo residues. Experience to date with alternative models for charging is considered. Conclusions are drawn about the effectiveness of the EU Directive as a means of controlling pollution in the North Sea and producing a 'level playing field' between ports.

  20. Neutron spectra at two beam ports of a TRIGA Mark III reactor loaded with HEU fuel.

    PubMed

    Vega-Carrillo, H R; Hernández-Dávila, V M; Aguilar, F; Paredes, L; Rivera, T

    2014-01-01

    The neutron spectra have been measured in two beam ports, one radial and another tangential, of the TRIGA Mark III nuclear reactor from the National Institute of Nuclear Research in Mexico. Measurements were carried out with the reactor core loaded with high enriched uranium fuel. Two reactor powers, 5 and 10 W, were used during neutron spectra measurements using a Bonner sphere spectrometer with a (6)LiI(Eu) scintillator and 2, 3, 5, 8, 10 and 12 in.-diameter high-density polyethylene spheres. The neutron spectra were unfolded using the NSDUAZ unfolding code. For each spectrum total flux, mean energy and ambient dose equivalent were determined. Measured spectra show fission, epithermal and thermal neutrons, being harder in the radial beam port.

  1. Neutron spectra at two beam ports of a TRIGA Mark III reactor loaded with HEU fuel.

    PubMed

    Vega-Carrillo, H R; Hernández-Dávila, V M; Aguilar, F; Paredes, L; Rivera, T

    2014-01-01

    The neutron spectra have been measured in two beam ports, one radial and another tangential, of the TRIGA Mark III nuclear reactor from the National Institute of Nuclear Research in Mexico. Measurements were carried out with the reactor core loaded with high enriched uranium fuel. Two reactor powers, 5 and 10 W, were used during neutron spectra measurements using a Bonner sphere spectrometer with a (6)LiI(Eu) scintillator and 2, 3, 5, 8, 10 and 12 in.-diameter high-density polyethylene spheres. The neutron spectra were unfolded using the NSDUAZ unfolding code. For each spectrum total flux, mean energy and ambient dose equivalent were determined. Measured spectra show fission, epithermal and thermal neutrons, being harder in the radial beam port. PMID:23746708

  2. A deployable .015 inch diameter wire antenna

    NASA Technical Reports Server (NTRS)

    Dibiasi, L.

    1979-01-01

    This mechanism was developed to dispense a small diameter wire which serves as a receiving antenna for electric field measurements on an Earth orbiting satellite. The antenna is deployed radially from a spinning satellite. A brushless dc motor drives a storage spool to dispense the wire at a controlled rate. Centrifugal force, acting on a mass attached to the end of the wire, keeps the wire in the radial position. The mechanism design, testing, and performance characteristics are discussed. Finally, operational data of the mechanism while in orbit are presented.

  3. Thread gauge for measuring thread pitch diameters

    DOEpatents

    Brewster, A.L.

    1985-11-19

    A thread gauge which attaches to a vernier caliper to measure the thread pitch diameter of both externally threaded and internally threaded parts is disclosed. A pair of anvils are externally threaded with threads having the same pitch as those of the threaded part. Each anvil is mounted on a stem having a ball on which the anvil can rotate to properly mate with the parts to which the anvils are applied. The stems are detachably secured to the caliper blades by attachment collars having keyhole openings for receiving the stems and caliper blades. A set screw is used to secure each collar on its caliper blade. 2 figs.

  4. Variable diameter wind turbine rotor blades

    DOEpatents

    Jamieson, Peter McKeich; Hornzee-Jones, Chris; Moroz, Emilian M.; Blakemore, Ralph W.

    2005-12-06

    A system and method for changing wind turbine rotor diameters to meet changing wind speeds and control system loads is disclosed. The rotor blades on the wind turbine are able to adjust length by extensions nested within or containing the base blade. The blades can have more than one extension in a variety of configurations. A cable winching system, a hydraulic system, a pneumatic system, inflatable or elastic extensions, and a spring-loaded jack knife deployment are some of the methods of adjustment. The extension is also protected from lightning by a grounding system.

  5. Thread gauge for measuring thread pitch diameters

    DOEpatents

    Brewster, Albert L.

    1985-01-01

    A thread gauge which attaches to a vernier caliper to measure the thread pitch diameter of both externally threaded and internally threaded parts. A pair of anvils are externally threaded with threads having the same pitch as those of the threaded part. Each anvil is mounted on a stem having a ball on which the anvil can rotate to properly mate with the parts to which the anvils are applied. The stems are detachably secured to the caliper blades by attachment collars having keyhole openings for receiving the stems and caliper blades. A set screw is used to secure each collar on its caliper blade.

  6. Synthesis of a novel small diameter polyurethane vascular graft with reactive binding sites.

    PubMed

    Dempsey, D J; Phaneuf, M D; Bide, M J; Szycher, M; Quist, W C; Logerfo, F W

    1998-01-01

    Development of a small diameter (4 mm inner diameter [ID]) prosthetic vascular graft with functional groups accessible for covalent binding of recombinant hirudin (a potent anticoagulant) should create a more hemocompatible surface. The purpose of this study was to develop a technique for generating carboxylic acid groups on the surface of precast 4 mm ID poly-(carbonate urea)-urethane vascular grafts and to evaluate the accessibility of these groups. A polycarbonate based urethane with the chain extender 2,2-bis(hydroxymethyl)propionic acid was synthesized. A precast 4 mm ID poly(carbonate urea)-urethane vascular graft (Chronoflex [CF]; CardioTech International, Woburn, MA) was then placed into a 4% carboxylated polyurethane (cPU) solution (in 1% dimethyl acetamide) and incubated for 30 minutes (cPU graft). To determine the accessibility of the carboxylic acid groups, a standard textile technique using methylene blue dye was used. Macroscopic cross-sections, which were cut and evaluated for dye penetration, showed greatest concentration of carboxylic acid groups at the luminal and capsule surfaces, with minimal penetration into the mid-portion of the graft. Analysis of dye baths for absorbance reduction resulted in the cPU grafts having 3.7-fold and 5.4-fold more accessible carboxylic acid groups compared with untreated and dimethyl acetamide dipped CF grafts. Thus, a novel small diameter vascular graft has been developed that contains reactive carboxylic acid groups accessible for protein binding. PMID:9804482

  7. Port wine stain on a child's face (image)

    MedlinePlus

    Port wine stains are always present at birth. In an infant, they are flat, pink, vascular lesions. Common locations ... may be present anywhere on the body. Port wine stains may appear in association with other syndromes.

  8. 50 CFR 300.188 - Ports of entry.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... International Trade Documentation and Tracking Programs for Highly Migratory Species § 300.188 Ports of entry... United States. If NMFS determines that the diversity of handling practices at certain ports at which...

  9. 50 CFR 300.188 - Ports of entry.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... International Trade Documentation and Tracking Programs for Highly Migratory Species § 300.188 Ports of entry... United States. If NMFS determines that the diversity of handling practices at certain ports at which...

  10. 9 CFR 93.703 - Ports designated for importation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., except as provided in paragraph (b) of this section, only through the following ports: (1) Air and ocean... Houston, TX; and Seattle, Spokane, and Tacoma, WA. (2) Canadian border ports. Eastport, ID; Houlton...

  11. 9 CFR 93.703 - Ports designated for importation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., except as provided in paragraph (b) of this section, only through the following ports: (1) Air and ocean... Houston, TX; and Seattle, Spokane, and Tacoma, WA. (2) Canadian border ports. Eastport, ID; Houlton...

  12. 9 CFR 93.703 - Ports designated for importation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., except as provided in paragraph (b) of this section, only through the following ports: (1) Air and ocean... Houston, TX; and Seattle, Spokane, and Tacoma, WA. (2) Canadian border ports. Eastport, ID; Houlton...

  13. Laser therapy in plastic surgery: decolorization in port wine stains

    NASA Astrophysics Data System (ADS)

    Peszynski-Drews, Cezary; Wolf, Leszek

    1996-03-01

    For the first time laserotherapy is described as a method of port wine stain decolorization in plastic surgery. The authors present their 20-year experience in the treatment of port wine stains with the argon laser and dye laser.

  14. Port-site implantation of Type A Masaoka Stage I thymoma after video-assisted thoracic surgery: a case report.

    PubMed

    Nose, Naohiro; Higuchi, Kazuhiro; Chosa, Eiichi; Ayabe, Takanori; Tomita, Masaki; Nakamura, Kunihide

    2016-01-01

    A 60-year-old woman was referred to our hospital with an anterior mediastinal tumor measuring 3.5 cm in diameter on computed tomography (CT). We performed tumor resection by video-assisted thoracic surgery (VATS) with three ports. The final diagnosis was Type A Masaoka Stage I thymoma. On follow-up CT performed 36 months after the operation, two pleural tumors were detected at the port sites through which the forceps and ultrasonic scalpel had passed repeatedly during the operation. We therefore performed a second operation and enucleated the tumors while preserving the ribs. However, other tumor tissue was detected along the surgical marginal line during the pathological diagnosis after the operation. Surgeons should thus be aware that port-site recurrence can occur after VATS resection of Type A thymoma, despite its mild biological behavior. Wide resection of the chest wall is therefore recommended for operations of port-site recurrence after VATS thymectomy. PMID:27672105

  15. Port-site implantation of Type A Masaoka Stage I thymoma after video-assisted thoracic surgery: a case report

    PubMed Central

    Nose, Naohiro; Higuchi, Kazuhiro; Chosa, Eiichi; Ayabe, Takanori; Tomita, Masaki; Nakamura, Kunihide

    2016-01-01

    A 60-year-old woman was referred to our hospital with an anterior mediastinal tumor measuring 3.5 cm in diameter on computed tomography (CT). We performed tumor resection by video-assisted thoracic surgery (VATS) with three ports. The final diagnosis was Type A Masaoka Stage I thymoma. On follow-up CT performed 36 months after the operation, two pleural tumors were detected at the port sites through which the forceps and ultrasonic scalpel had passed repeatedly during the operation. We therefore performed a second operation and enucleated the tumors while preserving the ribs. However, other tumor tissue was detected along the surgical marginal line during the pathological diagnosis after the operation. Surgeons should thus be aware that port-site recurrence can occur after VATS resection of Type A thymoma, despite its mild biological behavior. Wide resection of the chest wall is therefore recommended for operations of port-site recurrence after VATS thymectomy. PMID:27672105

  16. Port-site implantation of Type A Masaoka Stage I thymoma after video-assisted thoracic surgery: a case report

    PubMed Central

    Nose, Naohiro; Higuchi, Kazuhiro; Chosa, Eiichi; Ayabe, Takanori; Tomita, Masaki; Nakamura, Kunihide

    2016-01-01

    A 60-year-old woman was referred to our hospital with an anterior mediastinal tumor measuring 3.5 cm in diameter on computed tomography (CT). We performed tumor resection by video-assisted thoracic surgery (VATS) with three ports. The final diagnosis was Type A Masaoka Stage I thymoma. On follow-up CT performed 36 months after the operation, two pleural tumors were detected at the port sites through which the forceps and ultrasonic scalpel had passed repeatedly during the operation. We therefore performed a second operation and enucleated the tumors while preserving the ribs. However, other tumor tissue was detected along the surgical marginal line during the pathological diagnosis after the operation. Surgeons should thus be aware that port-site recurrence can occur after VATS resection of Type A thymoma, despite its mild biological behavior. Wide resection of the chest wall is therefore recommended for operations of port-site recurrence after VATS thymectomy.

  17. Port-site implantation of Type A Masaoka Stage I thymoma after video-assisted thoracic surgery: a case report.

    PubMed

    Nose, Naohiro; Higuchi, Kazuhiro; Chosa, Eiichi; Ayabe, Takanori; Tomita, Masaki; Nakamura, Kunihide

    2016-01-01

    A 60-year-old woman was referred to our hospital with an anterior mediastinal tumor measuring 3.5 cm in diameter on computed tomography (CT). We performed tumor resection by video-assisted thoracic surgery (VATS) with three ports. The final diagnosis was Type A Masaoka Stage I thymoma. On follow-up CT performed 36 months after the operation, two pleural tumors were detected at the port sites through which the forceps and ultrasonic scalpel had passed repeatedly during the operation. We therefore performed a second operation and enucleated the tumors while preserving the ribs. However, other tumor tissue was detected along the surgical marginal line during the pathological diagnosis after the operation. Surgeons should thus be aware that port-site recurrence can occur after VATS resection of Type A thymoma, despite its mild biological behavior. Wide resection of the chest wall is therefore recommended for operations of port-site recurrence after VATS thymectomy.

  18. Measurement of Diameter Changes during Irradiation Testing

    SciTech Connect

    Davis, K. L.; Knudson, D. L.; Crepeau, J. C.; Solstad, S.

    2015-03-01

    New materials are being considered for fuel, cladding, and structures in advanced and existing nuclear reactors. Such materials can experience significant dimensional and physical changes during irradiation. Currently in the US, such changes are measured by repeatedly irradiating a specimen for a specified period of time and then removing it from the reactor for evaluation. The time and labor to remove, examine, and return irradiated samples for each measurement makes this approach very expensive. In addition, such techniques provide limited data and handling may disturb the phenomena of interest. In-pile detection of changes in geometry is sorely needed to understand real-time behavior during irradiation testing of fuels and materials in high flux US Material and Test Reactors (MTRs). This paper presents development results of an advanced Linear Variable Differential Transformer-based test rig capable of detecting real-time changes in diameter of fuel rods or material samples during irradiation in US MTRs. This test rig is being developed at the Idaho National Laboratory and will provide experimenters with a unique capability to measure diameter changes associated with fuel and cladding swelling, pellet-clad interaction, and crud buildup.

  19. Sewage Disposal in Port Harcourt, Nigeria.

    ERIC Educational Resources Information Center

    Ayotamuno, M. J.

    1993-01-01

    This survey of the Port Harcourt, Nigeria, sewage disposal system exemplifies sewage disposal in the developing world. Results reveal that some well-constructed and maintained drains, as well as many open drains and septic tanks, expose women and children to the possibility of direct contact with parasitic organisms and threaten water resources.…

  20. 50 CFR 14.16 - Border ports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS IMPORTATION, EXPORTATION, AND TRANSPORTATION OF WILDLIFE Importation and Exportation at Designated Ports § 14.16 Border...) Minnesota—Grand Portage, International Falls, Minneapolis-St. Paul; (7) Montana—Raymond, Sweetgrass; (8)...

  1. 50 CFR 14.12 - Designated ports.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 1 2014-10-01 2014-10-01 false Designated ports. 14.12 Section 14.12 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND...

  2. 50 CFR 14.12 - Designated ports.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 1 2012-10-01 2012-10-01 false Designated ports. 14.12 Section 14.12 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND...

  3. Strong Motion Instrumentation of Seismically-Strengthened Port Structures in California by CSMIP

    USGS Publications Warehouse

    Huang, M.J.; Shakal, A.F.

    2009-01-01

    The California Strong Motion Instrumentation Program (CSMIP) has instrumented five port structures. Instrumentation of two more port structures is underway and another one is in planning. Two of the port structures have been seismically strengthened. The primary goals of the strong motion instrumentation are to obtain strong earthquake shaking data for verifying seismic analysis procedures and strengthening schemes, and for post-earthquake evaluations of port structures. The wharves instrumented by CSMIP were recommended by the Strong Motion Instrumentation Advisory Committee, a committee of the California Seismic Safety Commission. Extensive instrumentation of a wharf is difficult and would be impossible without the cooperation of the owners and the involvement of the design engineers. The instrumentation plan for a wharf is developed through study of the retrofit plans of the wharf, and the strong-motion sensors are installed at locations where specific instrumentation objectives can be achieved and access is possible. Some sensor locations have to be planned during design; otherwise they are not possible to install after construction. This paper summarizes the two seismically-strengthened wharves and discusses the instrumentation schemes and objectives. ?? 2009 ASCE.

  4. Evaluation of hands-on seminar for reduced port surgery using fresh porcine cadaver model

    PubMed Central

    Poudel, Saseem; Kurashima, Yo; Shichinohe, Toshiaki; Kitashiro, Shuji; Kanehira, Eiji; Hirano, Satoshi

    2016-01-01

    BACKGROUND: The use of various biological and non-biological simulators is playing an important role in training modern surgeons with laparoscopic skills. However, there have been few reports of the use of a fresh porcine cadaver model for training in laparoscopic surgical skills. The purpose of this study was to report on a surgical training seminar on reduced port surgery using a fresh cadaver porcine model and to assess its feasibility and efficacy. MATERIALS AND METHODS: The hands-on seminar had 10 fresh porcine cadaver models and two dry boxes. Each table was provided with a unique access port and devices used in reduced port surgery. Each group of 2 surgeons spent 30 min at each station, performing different tasks assisted by the instructor. The questionnaire survey was done immediately after the seminar and 8 months after the seminar. RESULTS: All the tasks were completed as planned. Both instructors and participants were highly satisfied with the seminar. There was a concern about the time allocated for the seminar. In the post-seminar survey, the participants felt that the number of reduced port surgeries performed by them had increased. CONCLUSION: The fresh cadaver porcine model requires no special animal facility and can be used for training in laparoscopic procedures. PMID:27279391

  5. Access Denied

    ERIC Educational Resources Information Center

    Villano, Matt

    2008-01-01

    Building access control (BAC)--a catchall phrase to describe the systems that control access to facilities across campus--has traditionally been handled with remarkably low-tech solutions: (1) manual locks; (2) electronic locks; and (3) ID cards with magnetic strips. Recent improvements have included smart cards and keyless solutions that make use…

  6. Open Access

    ERIC Educational Resources Information Center

    Suber, Peter

    2012-01-01

    The Internet lets us share perfect copies of our work with a worldwide audience at virtually no cost. We take advantage of this revolutionary opportunity when we make our work "open access": digital, online, free of charge, and free of most copyright and licensing restrictions. Open access is made possible by the Internet and copyright-holder…

  7. 19 CFR 18.12 - Entry at port of destination.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Entry at port of destination. 18.12 Section 18.12... § 18.12 Entry at port of destination. (a) Merchandise received under an immediate transportation... merchandise entered at a port of first arrival if not more than 6 months have elapsed from the date...

  8. 33 CFR 110.186 - Port Everglades, Florida.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Port Everglades, Florida. 110.186... ANCHORAGE REGULATIONS Anchorage Grounds § 110.186 Port Everglades, Florida. (a) The anchorage grounds. The... entrance to Port Everglades, is an area bounded by a line connecting points with the following...

  9. 19 CFR 4.35 - Unlading outside port of entry.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Unlading outside port of entry. 4.35 Section 4.35... TREASURY VESSELS IN FOREIGN AND DOMESTIC TRADES Landing and Delivery of Cargo § 4.35 Unlading outside port of entry. (a) Upon written application from the interested party, the port director concerned, if...

  10. 27 CFR 26.128 - Taxpayment at port of arrival.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Taxpayment at port of... Liquors and Articles Purchased by Tourists in Puerto Rico § 26.128 Taxpayment at port of arrival. If the... the port of arrival prior to release of the liquors or articles from customs custody. The tax may...

  11. 19 CFR 146.2 - Port director as Board representative.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 2 2011-04-01 2011-04-01 false Port director as Board representative. 146.2...; DEPARTMENT OF THE TREASURY (CONTINUED) FOREIGN TRADE ZONES General Provisions § 146.2 Port director as Board representative. The appropriate port director shall be in charge of the zone as the representative of the Board....

  12. 46 CFR 340.6 - Port facilities and services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Port facilities and services. 340.6 Section 340.6... AND ALLOCATION OF SHIPPING SERVICES, CONTAINERS AND CHASSIS, AND PORT FACILITIES AND SERVICES FOR NATIONAL SECURITY AND NATIONAL DEFENSE RELATED OPERATIONS § 340.6 Port facilities and services. (a) When...

  13. 19 CFR 4.35 - Unlading outside port of entry.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Unlading outside port of entry. 4.35 Section 4.35... TREASURY VESSELS IN FOREIGN AND DOMESTIC TRADES Landing and Delivery of Cargo § 4.35 Unlading outside port of entry. (a) Upon written application from the interested party, the port director concerned, if...

  14. 19 CFR 4.67 - Closed ports or places.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Closed ports or places. 4.67 Section 4.67 Customs... VESSELS IN FOREIGN AND DOMESTIC TRADES Foreign Clearances § 4.67 Closed ports or places. No foreign vessel shall be granted a clearance or permit to proceed to any port or place from which such vessels...

  15. 19 CFR 4.67 - Closed ports or places.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Closed ports or places. 4.67 Section 4.67 Customs... VESSELS IN FOREIGN AND DOMESTIC TRADES Foreign Clearances § 4.67 Closed ports or places. No foreign vessel shall be granted a clearance or permit to proceed to any port or place from which such vessels...

  16. 19 CFR 122.92 - Procedure at port of origin.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Procedure at port of origin. 122.92 Section 122.92... port of origin. (a) Forms required—(1) Customs Form 7512 or other document. Customs Form 7512 or other... Customs at the port of origin for merchandise for immediate transportation without appraisement....

  17. 19 CFR 146.2 - Port director as Board representative.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Port director as Board representative. 146.2...; DEPARTMENT OF THE TREASURY (CONTINUED) FOREIGN TRADE ZONES General Provisions § 146.2 Port director as Board representative. The appropriate port director shall be in charge of the zone as the representative of the Board....

  18. 19 CFR 18.12 - Entry at port of destination.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Entry at port of destination. 18.12 Section 18.12... § 18.12 Entry at port of destination. (a) Merchandise received under an immediate transportation... merchandise entered at a port of first arrival if not more than 6 months have elapsed from the date...

  19. 46 CFR 67.119 - Hailing port designation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Hailing port designation. 67.119 Section 67.119 Shipping... DOCUMENTATION OF VESSELS Assignments and Designations Required for Vessel Documentation § 67.119 Hailing port... part, the owner of a vessel must designate a hailing port to be marked upon the vessel. (b) The...

  20. 46 CFR 67.119 - Hailing port designation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Hailing port designation. 67.119 Section 67.119 Shipping... DOCUMENTATION OF VESSELS Assignments and Designations Required for Vessel Documentation § 67.119 Hailing port... part, the owner of a vessel must designate a hailing port to be marked upon the vessel. (b) The...

  1. 19 CFR 158.30 - Review of port director's decision.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 2 2011-04-01 2011-04-01 false Review of port director's decision. 158.30 Section... Casualty, Loss, or Theft While in Customs Custody § 158.30 Review of port director's decision. (a) Filing of petition. The importer may file with the port director a petition addressed to the Commissioner...

  2. 9 CFR 93.220 - Inspection at port of entry.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Inspection at port of entry. 93.220... FOR MEANS OF CONVEYANCE AND SHIPPING CONTAINERS Poultry Mexico 8 § 93.220 Inspection at port of entry... the United States in bond for immediate return to Mexico, shall be inspected at the port of entry,...

  3. 9 CFR 93.220 - Inspection at port of entry.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Inspection at port of entry. 93.220... FOR MEANS OF CONVEYANCE AND SHIPPING CONTAINERS Poultry Mexico 8 § 93.220 Inspection at port of entry... the United States in bond for immediate return to Mexico, shall be inspected at the port of entry,...

  4. 27 CFR 28.262 - Delay in lading at port.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Delay in lading at port..., DEPARTMENT OF THE TREASURY LIQUORS EXPORTATION OF ALCOHOL Proceedings at Ports of Export § 28.262 Delay in lading at port. If, on arrival of a shipment withdrawn for export without payment of tax or free of...

  5. 27 CFR 28.262 - Delay in lading at port.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Delay in lading at port..., DEPARTMENT OF THE TREASURY LIQUORS EXPORTATION OF ALCOHOL Proceedings at Ports of Export § 28.262 Delay in lading at port. If, on arrival of a shipment withdrawn for export without payment of tax or free of...

  6. 76 FR 20524 - Anchorage Regulations; Port of New York

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-13

    ... Anchorage Regulations; Port of New York in the Federal Register (74 FR 47906). We received one comment on...; Port of New York'' in the Federal Register on April 28, 2010 (75 FR 22323) revising its proposal to... SECURITY Coast Guard 33 CFR Part 110 RIN 1625-AA01 Anchorage Regulations; Port of New York AGENCY:...

  7. 33 CFR 125.55 - Outstanding Port Security Card Applications.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Outstanding Port Security Card... WATERFRONT FACILITIES OR VESSELS § 125.55 Outstanding Port Security Card Applications. A person who has filed an application for a Coast Guard Port Security Card and who did not receive such a document prior...

  8. 33 CFR 125.55 - Outstanding Port Security Card Applications.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Outstanding Port Security Card... WATERFRONT FACILITIES OR VESSELS § 125.55 Outstanding Port Security Card Applications. A person who has filed an application for a Coast Guard Port Security Card and who did not receive such a document prior...

  9. 33 CFR 125.55 - Outstanding Port Security Card Applications.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Outstanding Port Security Card... WATERFRONT FACILITIES OR VESSELS § 125.55 Outstanding Port Security Card Applications. A person who has filed an application for a Coast Guard Port Security Card and who did not receive such a document prior...

  10. 33 CFR 125.55 - Outstanding Port Security Card Applications.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Outstanding Port Security Card... WATERFRONT FACILITIES OR VESSELS § 125.55 Outstanding Port Security Card Applications. A person who has filed an application for a Coast Guard Port Security Card and who did not receive such a document prior...

  11. 33 CFR 125.55 - Outstanding Port Security Card Applications.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Outstanding Port Security Card... WATERFRONT FACILITIES OR VESSELS § 125.55 Outstanding Port Security Card Applications. A person who has filed an application for a Coast Guard Port Security Card and who did not receive such a document prior...

  12. 19 CFR 122.92 - Procedure at port of origin.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Procedure at port of origin. 122.92 Section 122.92... port of origin. (a) Forms required—(1) Customs Form 7512 or other document. Customs Form 7512 or other... Customs at the port of origin for merchandise for immediate transportation without appraisement....

  13. 19 CFR 122.92 - Procedure at port of origin.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Procedure at port of origin. 122.92 Section 122.92... port of origin. (a) Forms required—(1) Customs Form 7512 or other document. Customs Form 7512 or other... Customs at the port of origin for merchandise for immediate transportation without appraisement....

  14. 46 CFR Sec. 4 - Port facilities predesignated for emergency use.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Port facilities predesignated for emergency use. Sec. 4... FACILITIES Sec. 4 Port facilities predesignated for emergency use. (a) Certain port facilities selected for...) Facilities which are not required by the United States immediately on the effective date of this part will...

  15. 46 CFR Sec. 3 - Federal control of port facilities.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Federal control of port facilities. Sec. 3 Section 3... RESTRICTIONS UPON THE TRANSFER OR CHANGE IN USE OR IN TERMS GOVERNING UTILIZATION OF PORT FACILITIES Sec. 3 Federal control of port facilities. During any period when the provisions of this part are in effect...

  16. 46 CFR 340.6 - Port facilities and services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Port facilities and services. 340.6 Section 340.6... AND ALLOCATION OF SHIPPING SERVICES, CONTAINERS AND CHASSIS, AND PORT FACILITIES AND SERVICES FOR NATIONAL SECURITY AND NATIONAL DEFENSE RELATED OPERATIONS § 340.6 Port facilities and services. (a) When...

  17. 33 CFR 80.1120 - Port Hueneme, CA.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Port Hueneme, CA. 80.1120 Section 80.1120 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Coast § 80.1120 Port Hueneme, CA. (a) A line drawn from Port Hueneme East Jetty Light 4 to...

  18. 46 CFR Sec. 3 - Federal control of port facilities.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Federal control of port facilities. Sec. 3 Section 3 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION B-CONTROL AND UTILIZATION OF PORTS RESTRICTIONS UPON THE TRANSFER OR CHANGE IN USE OR IN TERMS GOVERNING UTILIZATION OF PORT FACILITIES Sec....

  19. 46 CFR Sec. 3 - Federal control of port facilities.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Federal control of port facilities. Sec. 3 Section 3 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION B-CONTROL AND UTILIZATION OF PORTS RESTRICTIONS UPON THE TRANSFER OR CHANGE IN USE OR IN TERMS GOVERNING UTILIZATION OF PORT FACILITIES Sec....

  20. 46 CFR Sec. 3 - Federal control of port facilities.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Federal control of port facilities. Sec. 3 Section 3 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION B-CONTROL AND UTILIZATION OF PORTS RESTRICTIONS UPON THE TRANSFER OR CHANGE IN USE OR IN TERMS GOVERNING UTILIZATION OF PORT FACILITIES Sec....

  1. 46 CFR Sec. 3 - Federal control of port facilities.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Federal control of port facilities. Sec. 3 Section 3 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION B-CONTROL AND UTILIZATION OF PORTS RESTRICTIONS UPON THE TRANSFER OR CHANGE IN USE OR IN TERMS GOVERNING UTILIZATION OF PORT FACILITIES Sec....

  2. 19 CFR 158.29 - Decision by port director.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 2 2012-04-01 2012-04-01 false Decision by port director. 158.29 Section 158.29..., or Theft While in Customs Custody § 158.29 Decision by port director. When the application and evidence have been received and examined by the port director, he shall determine whether the...

  3. 19 CFR 158.29 - Decision by port director.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Decision by port director. 158.29 Section 158.29..., or Theft While in Customs Custody § 158.29 Decision by port director. When the application and evidence have been received and examined by the port director, he shall determine whether the...

  4. 19 CFR 158.29 - Decision by port director.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 2 2013-04-01 2013-04-01 false Decision by port director. 158.29 Section 158.29..., or Theft While in Customs Custody § 158.29 Decision by port director. When the application and evidence have been received and examined by the port director, he shall determine whether the...

  5. 19 CFR 158.29 - Decision by port director.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 2 2011-04-01 2011-04-01 false Decision by port director. 158.29 Section 158.29..., or Theft While in Customs Custody § 158.29 Decision by port director. When the application and evidence have been received and examined by the port director, he shall determine whether the...

  6. Development of fine diameter mullite fiber

    NASA Technical Reports Server (NTRS)

    Long, W. G.

    1974-01-01

    Results are presented of a program to develop and evaluate mullite fiber with a mean diameter under two microns. The two micron fiber is produced by a blowing process at room temperature from a low viscosity (10-25 poise) solution. The blown fiber was evaluated for dimensional stability in thermal cycling to 1371 C, and was equivalent to the 5 micron spun B and W mullite fiber. An additive study was conducted to evaluate substitutes for the boron. Three levels of chromium, lithium fluoride, and magnesium were added to the standard composition in place of boron and the fiber produced was evaluated for chemical and dimensional stability in thermal cycling to 1371 C. The magnesium was the most chemically stable, but the chrome additive imparted the best dimensional stability.

  7. Fire protection covering for small diameter missiles

    NASA Technical Reports Server (NTRS)

    Riccitiello, S. R.; Sawko, P. M. (Inventor)

    1979-01-01

    Flexible intumescent protection sheeting of unusually uniform thickness were prepared from epoxy-polysulfide compositions, containing microfibers and the ammonium salt of 1,4-nitroaniline-2-sulfonic acid, as disclosed in U.S. Pat. No. 3,663,464, except that an ammonium salt particle size in the order of 5 to 8 microns and a fiber size of about 1/128th inch in length and 3 to 5 microns in diameter were found critical to obtain the required density of 1.46 to 1.50 g/cc. The insulation sheeting was prepared by a continuous process involving vacuum mixing, calendering, and curing under very strict conditions which depend to some extent upon the thickness of the sheet produced.

  8. Granulation, Irradiance and Diameter Solar Variations

    NASA Astrophysics Data System (ADS)

    Humberto Andrei, Alexandre; Calderari Boscardin, Sergio; Lousada Penna, Jucira; Reis Neto, Eugenio

    2015-08-01

    Though granulation forms the very face of sun’s photosphere, there are no long term registers of it. Observational and computational hardships to define and follow such highly variable “face” have so far prevented the realization of those registers. However, in recent years a large, coherent body of white light images became available. We retrieved white light, full solar disk images from the BBSO, to a total of 1104 treated ones and 1245 treated and compensated for limb darkening ones. The time coverage extends from the year 2000 to 2005, thus covering the rise and fall of the solar cycle 23. For the analysis, only the central 0.35R portion of the Sun was considered. The central portion was then divided into 100 subsectors, to average and discard the deviant results. The analysis goal is to derive the long term behavior of the photosphere granulation, in broad statistical sense. Three statistics were this way calculated: the standard deviation of the counts (that answers to the grains size); the counts difference between the maximum and minimum tenths (that answers to the grains brightness); the degree of the best fit polynomial along lines and columns (that answers to the grains numbers). According to the statistics, there is no significant variation in the number of grains. The grains sizes are the largest by the solar maximum, in excellent agreement with the maximum of the measured diameter. The grains brightness, on the contrary, is minimum at the solar maximum, and again an excellent agreement is verified with the maximum of the measured diameter.

  9. 78 FR 42587 - Deepwater Port License: Amendment of the Neptune LNG LLC Deepwater Port License and Temporary...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-16

    ... Maritime Administration Deepwater Port License: Amendment of the Neptune LNG LLC Deepwater Port License and Temporary Suspension of Operations at the Neptune LNG Deepwater Port AGENCY: Maritime Administration... Administration (MarAd) provides public notice of its decision to approve the request of Neptune LNG LLC...

  10. Low Back Pain in Port Machinery Operators

    NASA Astrophysics Data System (ADS)

    BOVENZI, M.; PINTO, I.; STACCHINI, N.

    2002-05-01

    The occurrence of several types of low back pain (LBP) was investigated by a standardized questionnaire in a group of 219 port machinery operators exposed to whole-body vibration (WBV) and postural load and in a control group of 85 maintenance workers employed at the same transport company. The group of port machinery operators included 85 straddle carrier drivers, 88 fork-lift truck drivers, and 46 crane operators. The vector sum of the frequency-weighted r.m.s. acceleration of vibration measured on the seatpan of port vehicles and machines averaged 0·90 m/s2 for fork-lift trucks, 0·48 m/s2 for straddle carriers, 0·53 m/s2 for mobile cranes, and 0·22 m/s2 for overhead cranes. The 12-month prevalence of low back symptoms (LBP, sciatic pain, treated LBP, sick leave due to LBP) was significantly greater in the fork-lift truck drivers than in the controls and the other two groups of port machinery operators. After adjusting for potential confounders, the prevalence of low back symptoms was found to increase with the increase of WBV exposure expressed as duration of exposure (driving years), equivalent vibration magnitude (m/s2), or cumulative vibration exposure (yr m2/s4). An excess risk for lumbar disc herniation was observed in the port machinery operators with prolonged driving experience. In both the controls and the port machinery operators, low back complaints were strongly associated with perceived postural load assessed in terms of frequency and/or duration of awkward postures at work. Multivariate analysis showed that vibration exposure and postural load were independent predictors of LBP. Even though the cross-sectional design of the present study does not permit firm conclusions on the relationship between WBV exposure and low back disorders, the findings of this investigation provide additional epidemiological evidence that seated WBV exposure combined with non-neutral trunk postures, as while driving, is associated with an increased risk of long

  11. Multi-mode to single-mode conversion in a 61 port Photonic Lantern.

    PubMed

    Noordegraaf, D; Skovgaard, P M W; Maack, M D; Bland-Hawthorn, J; Haynes, R; Laegsgaard, J

    2010-03-01

    Efficient multi-mode (MM) to single-mode (SM) conversion in a 61 port splitter or "Photonic Lantern" is demonstrated. The coupling loss from a 100 microm core diameter MM section to an ensemble of 61 SM fibers and back to another 100 microm core MM section is measured to be as low as 0.76 dB. This demonstration shows the feasibility of using the Photonic Lanterns within the field of astrophotonics for coupling MM star-light to an ensemble of SM fibers in order to perform fiber Bragg grating based spectral filtering.

  12. Scavenging a Piston-ported Two-stroke Cylinder

    NASA Technical Reports Server (NTRS)

    Rogowski, A R; Bouchard, C L

    1938-01-01

    An investigation was made with a specially designed engine to determine the scavenging characteristics of a large number of inlet-port shapes and arrangements and the optimum port arrangement and timing for this particular type of engine. A special cylinder construction permitted wide variations in timing for this particular type of engine. A special cylinder construction permitted wide variations in timing as well as in shape and arrangement of both the inlet and exhaust ports. The study of the effect of port shape combinations and timings on engine performance was made using illuminating gas as a fuel. Through variations in inlet-port arrangement and port timings, the value of the scavenging efficiency was increased from an original 44 percent to approximately 67 percent with a corresponding increase in power. With the optimum port arrangement and timing determined, a large number of performance runs were made under both spark-ignition and compression-ignition operation.

  13. Detecting and Characterizing Semantic Inconsistencies in Ported Code

    NASA Technical Reports Server (NTRS)

    Ray, Baishakhi; Kim, Miryung; Person, Suzette J.; Rungta, Neha

    2013-01-01

    Adding similar features and bug fixes often requires porting program patches from reference implementations and adapting them to target implementations. Porting errors may result from faulty adaptations or inconsistent updates. This paper investigates (I) the types of porting errors found in practice, and (2) how to detect and characterize potential porting errors. Analyzing version histories, we define five categories of porting errors, including incorrect control- and data-flow, code redundancy, inconsistent identifier renamings, etc. Leveraging this categorization, we design a static control- and data-dependence analysis technique, SPA, to detect and characterize porting inconsistencies. Our evaluation on code from four open-source projects shows thai SPA can dell-oct porting inconsistencies with 65% to 73% precision and 90% recall, and identify inconsistency types with 58% to 63% precision and 92% to 100% recall. In a comparison with two existing error detection tools, SPA improves precision by 14 to 17 percentage points

  14. Detecting and Characterizing Semantic Inconsistencies in Ported Code

    NASA Technical Reports Server (NTRS)

    Ray, Baishakhi; Kim, Miryung; Person,Suzette; Rungta, Neha

    2013-01-01

    Adding similar features and bug fixes often requires porting program patches from reference implementations and adapting them to target implementations. Porting errors may result from faulty adaptations or inconsistent updates. This paper investigates (1) the types of porting errors found in practice, and (2) how to detect and characterize potential porting errors. Analyzing version histories, we define five categories of porting errors, including incorrect control- and data-flow, code redundancy, inconsistent identifier renamings, etc. Leveraging this categorization, we design a static control- and data-dependence analysis technique, SPA, to detect and characterize porting inconsistencies. Our evaluation on code from four open-source projects shows that SPA can detect porting inconsistencies with 65% to 73% precision and 90% recall, and identify inconsistency types with 58% to 63% precision and 92% to 100% recall. In a comparison with two existing error detection tools, SPA improves precision by 14 to 17 percentage points.

  15. Gaining Access.

    ERIC Educational Resources Information Center

    Kennedy, Mike

    2000-01-01

    Discusses issues schools and universities have encountered in complying with the Americans with Disabilities Act (ADA) and making their facilities more accessible to the disabled. The ADA's vagueness and the architect's need for understanding the regulations is highlighted. (GR)

  16. Equal Access.

    ERIC Educational Resources Information Center

    De Patta, Joe

    2003-01-01

    Presents an interview with Stephen McCarthy, co-partner and president of Equal Access ADA Consulting Architects of San Diego, California, about designing schools to naturally integrate compliance with the Americans with Disabilities Act (ADA). (EV)

  17. Capital access.

    PubMed

    Towne, Jennifer

    2004-06-01

    To maintain their viability, hospitals are being compelled to invest in big capital projects such as information technology and renovation and construction. This gatefold examines the trends in credit and capital, and how they affect hospitals' access to money.

  18. A comparative study of two-port versus three-port laparoscopic cholecystectomy

    PubMed Central

    Hajong, Ranendra; Khariong, Peter DS

    2016-01-01

    BACKGROUND: Conventionally, laparoscopic cholecystectomy (LC) is performed by using three or four ports of various sizes. As cosmesis is an important aspect of LC, the trend is now towards use of fewer ports, thereby resulting in better cosmesis for patients. The aim of this study was to compare three-port against two-port LC techniques and to see whether there is any advantage in using one technique over the other. SETTINGS AND DESIGN: The study was conducted in the Department of General Surgery of North Eastern Indira Gandhi Regional Institute of Health and Medical Sciences (NEIGRIHMS) hospital in Northeast India. A prospective comparative type of study was designed. An odd number of patients were operated on by using the three-port technique (Group A), whereas an even number of patients were operated on by the two-port technique (Group B). MATERIALS AND METHODS: Sixty patients with symptomatic gallstone disease were included in the study after obtaining informed consent from each of the patients. All patients were operated on under general anaesthesia. STATISTICAL ANALYSIS USED: Statistical analysis was done using SPSS software version 22. RESULTS: There were 51 female patients and 9 male patients. The mean patient age was 38.67 years. There was less operative time in group A but less postoperative pain in group B. Cosmetic appearance and patient satisfaction for the scar were better in group B. CONCLUSIONS: The two-port method appeared to have better acceptability among patients due to lower pain score and better cosmesis. PMID:27251814

  19. Single port laparoscopic liver surgery: A minireview

    PubMed Central

    Karabicak, Ilhan; Karabulut, Kagan

    2016-01-01

    Nowadays, the trend is to perform surgeries with “scarless” incisions. In light of this, the single-port laparoscopic surgery (SPLS) technique is rapidly becoming widespread due to its lack of invasiveness and its cosmetic advantages, as the only entry point is usually hidden in the umbilicus. The interest in “scarless” liver resections did not grow as rapidly as the interest in other scarless surgeries. Hepatopancreatobiliary surgeons are reluctant to operate a malignant lesion through a narrow incision with limited exposure. There are concerns over adverse oncological outcomes for single-port laparoscopic liver resections (SPL-LR) for hepatocellular carcinoma or metastatic colorectal cancer. In addition, getting familiar with using the operating instruments through a narrow incision with limited exposure is very challenging. In this article, we reviewed the published literature to describe history, indications, contraindications, ideal patients for new beginners, technical difficulty, advantages, disadvantages, oncological concern and the future of SPL-LR. PMID:27358670

  20. Tsunami response system for ports in Korea

    NASA Astrophysics Data System (ADS)

    Cho, H.-R.; Cho, J.-S.; Cho, Y.-S.

    2015-03-01

    The tsunamis that have occurred in many places around the world over the past decade have taken a heavy toll on human lives and property. The eastern coast of the Korean Peninsula is not safe from tsunamis, particularly the eastern coastal areas, which have long sustained tsunami damage. The aim of this study was to mitigate the casualties and property damage on the east eastern coast by developing a proper tsunami response system for important ports and harbors with high population densities and high concentrations of key national industries. For study purposes, the government-managed major international trade ports and coastal harbors were selected and an effective tsunami response system was formulated based on field surveys and related literature.

  1. The Umbilical Benz Incision for Reduced Port Surgery in Pediatric Patients

    PubMed Central

    Amano, Hizuru; Kawashima, Hiroshi; Deie, Kyoichi; Murase, Naruhiko; Makita, Satoshi; Yokota, Kazuki; Tanaka, Yujiro

    2015-01-01

    Background and Objectives: For reduced port surgery in pediatric patients, the initial umbilical incision plays an important role in both functional ability and cosmetic impact. Larger umbilical incisions enable better manipulation of forceps, extraction of larger surgical specimens, and easier exteriorization of the intestine for anastomosis. We have pursued an incision of the small pediatric umbilicus that allows for enlargement of the orifice of the abdominal opening with preservation of the natural umbilical profile. This article aims to present a new umbilical incision technique and describe the outcomes. Methods: We devised a new umbilical incision technique for reduced port surgery in pediatric patients. Our incision is made in an inverted Y shape (Benz incision), allowing for access port device insertion. The Benz incision technique was applied between November 2010 and May 2014 and was retrospectively studied. Results: Seventy-five patients underwent Benz incisions. The median age of all patients was 6 years 6 months (range, 26 days to 18 years), and the median body weight was 21.7 kg (range, 3.1–54.3 kg). Benz incisions were applied for various procedures, including reduced port surgery with hepaticojejunostomy for congenital biliary dilatation, portojejunostomy for biliary atresia, Meckel diverticulectomy, tumor resection, varicocelectomy, cholecystectomy, splenectomy, ileus surgery, ileocecal resection, and total colectomy. All patients were successfully treated, without a significant increase in operating time or severe complications. The cosmetic profile of the umbilicus was maintained after surgery. Conclusion: The Benz incision is a feasible, effective, and scarless approach for reduced port surgery in pediatric patients whose umbilical rings are too small for the conventional approach. PMID:25848185

  2. Large Circular Basin - 1300-km diameter

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Close-up view of one-half of a 1300-km diameter circular basin the largest observed on Mercury. The other half is hidden beyond the terminator to the left. Hills and valleys extend in a radial fashion outward from the main ring. Interior of the large basin is completely flooded by plains materials; adjacent lowlands are also partially flooded and superimposed on the plains are bowl shaped craters. Wrinkle ridges are abundant on the plains materials. The area shown is 1008 miles (1600 km) from the top to the bottom of the picture. Sun's illumination is from the right. Blurred linear lines extending across the picture near bottom are missing data lines that have been filled in by the computer. Mariner 10 encountered Mercury on Friday, March 29th, 1974, passing the planet on the darkside 431 miles (690-km) from the surface.

    The Mariner 10 mission, managed by the Jet Propulsion Laboratory for NASA's Office of Space Science, explored Venus in February 1974 on the way to three encounters with Mercury-in March and September 1974 and in March 1975. The spacecraft took more than 7,000 photos of Mercury, Venus, the Earth and the Moon.

    NOTE: This image was scanned from physical media.

  3. The 15 cm diameter ion thruster research

    NASA Technical Reports Server (NTRS)

    Wilbur, P. J.

    1974-01-01

    The startup reliability of a 15 cm diameter mercury bombardment ion thruster which employs a pulsed high voltage tickler electrode on the main and neutralizer cathodes is examined. Startup of the thruster is achieved 100% of the time on the main cathode and 98.7% of the time on the neutralizer cathode over a 3640 cycle test. The thruster was started from a 20 C initial condition and operated for an hour at a 600 mA beam current. An energy efficiency of 75% and a propellant utilization efficiency of 77% was achieved over the complete cycle. The effect of a single cusp magnetic field thruster length on its performance is discussed. Guidelines are formulated for the shaping of magnetic field lines in thrusters. A model describing double ion production in mercury discharges is presented. The production route is shown to occur through the single ionic ground state. Photographs of the interior of an operating-hollow cathode are presented. A cathode spot is shown to be present if the cathode is free of low work-function surfaces. The spot is observed if a low work-function oxide coating is applied to the cathode insert. Results show that low work-function oxide coatings tend to migrate during thruster operation.

  4. SKADS: Sub-Kilometer Asteroid Diameter Survey

    NASA Astrophysics Data System (ADS)

    Davis, D. R.; Gladman, B.; Jedicke, R.; Williams, G.

    2004-11-01

    We surveyed 8 sq deg over the course of six nights (March 21-23 and March 29-31 UT, 2001) using the mosaic camera on the KPNO 4m telescope. This survey was designed to sample the mainbelt asteroid size and orbit distribution down to mR ˜ 23 and to obtain V and R band photometry on these objects. Improved understanding of the asteroid size distribution is needed to refine our knowledge of the disruptive scaling law and the collisional evolution of asteroids. On each night, 24 fields were observed 3 times with the fields being shifted by the mean motion of mainbelt asteroids between dates. Data was taken on all six nights with 4 nights being photometric for all or most of the night. A total of 1087 asteroids were detected on 2 or more of the 6 nights while 907 asteroids were detected on at least 4 nights to allow a ``good" orbit to be determined. The 50% detection efficiency was between mR ˜ 22.9 and 23.1 for the photometric nights. Debiasing the detected asteroids will yield the asteroid diameter distribution down to sub-km sizes.

  5. Laser Treatment of Port Wine Stains

    NASA Astrophysics Data System (ADS)

    Majaron, Boris; Nelson, J. Stuart

    Port wine stain (PWS), also called nevus flammeus, is a congenital, cutaneous vascular malformation involving post-capillary venules which produce a light pink to red to dark-red-violet discoloration of human skin [1]. PWS occurs in an estimated 3 children per 1000 live births, affecting males and females and all racial groups equally [2]. There appears to be no hereditary predilection for PWS within families. There are no known risk factors or ways to prevent PWS.

  6. 3D visualization of port simulation.

    SciTech Connect

    Horsthemke, W. H.; Macal, C. M.; Nevins, M. R.

    1999-06-14

    Affordable and realistic three dimensional visualization technology can be applied to large scale constructive simulations such as the port simulation model, PORTSIM. These visualization tools enhance the experienced planner's ability to form mental models of how seaport operations will unfold when the simulation model is implemented and executed. They also offer unique opportunities to train new planners not only in the use of the simulation model but on the layout and design of seaports. Simulation visualization capabilities are enhanced by borrowing from work on interface design, camera control, and data presentation. Using selective fidelity, the designers of these visualization systems can reduce their time and efforts by concentrating on those features which yield the most value for their simulation. Offering the user various observational tools allows the freedom to simply watch or engage in the simulation without getting lost. Identifying the underlying infrastructure or cargo items with labels can provide useful information at the risk of some visual clutter. The PortVis visualization expands the PORTSIM user base which can benefit from the results provided by this capability, especially in strategic planning, mission rehearsal, and training. Strategic planners will immediately reap the benefits of seeing the impact of increased throughput visually without keeping track of statistical data. Mission rehearsal and training users will have an effective training tool to supplement their operational training exercises which are limited in number because of their high costs. Having another effective training modality in this visualization system allows more training to take place and more personnel to gain an understanding of seaport operations. This simulation and visualization training can be accomplished at lower cost than would be possible for the operational training exercises alone. The application of PORTSIM and PortVis will lead to more efficient

  7. An evaluation of Access Tier local area network switches.

    SciTech Connect

    Eldridge, John M.; Olsberg, Ronald R.

    2004-06-01

    This reports tabulates the Test and Evaluation results of the Access Class Switch tests conducted by members of Department 9336. About 15 switches were reviewed for use in the enterprise network as access tier switches as defined in a three tier architecture. The Access Switch Tier has several functions including: aggregate customer desktop ports, preserve and apply QoS tags, provide switched LAN access, provide VLAN assignment, as well as others. The typical switch size is 48 or less user ports. The evaluation team reviewed network switch evaluation reports from the Tolly Group as well as other sources. We then used these reports as a starting point to identify particular switches for evaluation. In general we reviewed the products of dominant equipment manufacturers. Also, based on architectural design requirements, the majority of the switches tested were of relatively small monolithic unit variety.

  8. Transpiring purging access probe for particulate laden or hazardous environments

    SciTech Connect

    VanOsdol, John G

    2013-12-03

    An access probe for remote-sensing access through a viewing port, viewing volume, and access port into a vessel. The physical boundary around the viewing volume is partially formed by a porous sleeve lying between the viewing volume and a fluid conduit. In a first mode of operation, a fluid supplied to the fluid conduit encounters the porous sleeve and flows through the porous material to maintain the viewing volume free of ash or other matter. When additional fluid force is needed to clear the viewing volume, the pressure of the fluid flow is increased sufficiently to slidably translate the porous sleeve, greatly increasing the flow into the viewing volume. The porous sleeve is returned to position by an actuating spring. The access probe thereby provides for alternate modes of operation based on the pressure of an actuating fluid.

  9. Underwater Calibration of Dome Port Pressure Housings

    NASA Astrophysics Data System (ADS)

    Nocerino, E.; Menna, F.; Fassi, F.; Remondino, F.

    2016-03-01

    Underwater photogrammetry using consumer grade photographic equipment can be feasible for different applications, e.g. archaeology, biology, industrial inspections, etc. The use of a camera underwater can be very different from its terrestrial use due to the optical phenomena involved. The presence of the water and camera pressure housing in front of the camera act as additional optical elements. Spherical dome ports are difficult to manufacture and consequently expensive but at the same time they are the most useful for underwater photogrammetry as they keep the main geometric characteristics of the lens unchanged. Nevertheless, the manufacturing and alignment of dome port pressure housing components can be the source of unexpected changes of radial and decentring distortion, source of systematic errors that can influence the final 3D measurements. The paper provides a brief introduction of underwater optical phenomena involved in underwater photography, then presents the main differences between flat and dome ports to finally discuss the effect of manufacturing on 3D measurements in two case studies.

  10. Photodynamic therapy for port wine stains

    NASA Astrophysics Data System (ADS)

    Li, Junheng

    1998-08-01

    Therapies for port wine stains including conventional laser irradiation usually cause unacceptable scarring or obtain poor effect. Pulsed dye laser has better approach, but only few patients obtain complete fading after multiple laser treatment. Because port wine stain is a congenital vasculopathy consisting of an abnormal network of capillaries in the upper dermis with an overlying normal epidermis and the researchers found that tumor blood vessels were occluded accompanying the necrosis of the tumor after PDT. It is though to be the effect primarily by thrombus formation in vessels and shut down of the blood supply to the tumor as well as direct tumor cells kill. The author and his colleagues started a series of animal and clinical studies since 1991 about photodynamic therapy for port wine stains and they established the method of PDT for PWS. An experimental study showed that Hpd appeared rapidly within the human vascular endothelial cells in culture fluid. Animal study using chicken combs as PWS models treated by PDT revealed the possibility of selective destruction of the malformative vasculature in PWS. The clinical studies of over 1700 cases proved that PWS can be cured without scar formation by PDT because there is no thermal effect involved. No relapse was found within a maximum follow-up of seven years. The differences and mechanism between the treatments of PDT and conventional lasers are discussed.

  11. A model for analyzing the transshipment competition relationship between the port of Hong Kong and the port of Kaohsiung

    NASA Astrophysics Data System (ADS)

    Chou, Chien Chang

    2009-12-01

    The transshipment is an important issue in the current marine transportation. This paper constructed a mathematical programming model to elaborate the transshipment port selection for the shipping company. This model is tested by the data collected from the ports of Hong Kong and Kaohsiung. The results show that this model can be used to explain the transshipment competition relationship between the ports of Hong Kong and Kaohsiung well. A sensitivity analysis was also executed. The sensitivity analysis results showed that both the port of Hong Kong and Kaohsiung should decrease the charges of port and increase the efficiency of loading and discharging. Based on the sensitivity analysis results, some interesting conclusions and helpful suggestions were obtained for the managers of the ports of Hong Kong and Kaohsiung to improve their port management.

  12. Impedance measurement techniques for one-port and two-port networks.

    PubMed

    Bai, Mingsian R; Lo, Yi-Yang; Chen, You Siang

    2015-10-01

    A microphone array impedance matrix measurement technique is presented for linear and passive acoustic two-port networks. Two impedance tubes fitted with three non-uniformly spaced microphones are required in the measurement. The non-uniform spacing is intended to avoid ill-posedness problems in calculating two plane-wave components traveling in opposite directions. Based on the one-port measurement, acoustic two-port networks modeled with the source and the load connected are examined. Three experimental procedures, the two-load measurement method (TLMM), the reciprocal-constrained method (RCM), and the reciprocity-symmetry-constrained method (RSCM), are developed to measure the acoustic impedance matrix. Experiments are conducted for several acoustic two-port systems to verify the proposed techniques. The results demonstrate the efficacy of the three experimental procedures when applied to symmetrical and reciprocal systems. For asymmetrical systems, the TLMM and RCM are preferred over the RSCM for measuring the impedance matrix. On top of that, the non-uniform array in conjunction with TLMM is extended to a general electroacoustic two-port system, which can be regarded as a unique contribution of the present work. PMID:26520309

  13. Design of the Long-term Waste Management Facility for Historic LLRW Port Hope Project - 13322

    SciTech Connect

    Campbell, Don; Barton, David; Case, Glenn

    2013-07-01

    The Municipality of Port Hope is located on the northern shores of Lake Ontario approximately 100 km east of Toronto, Ontario, Canada. Starting in the 1930's, radium and later uranium processing by Eldorado Gold Mines Limited (subsequently Eldorado Nuclear Limited) (Eldorado) at their refinery in Port Hope resulted in the generation of process residues and wastes that were disposed of indiscriminately throughout the Municipality until about the mid-1950's. These process residues contained radium (Ra- 226), uranium, arsenic and other contaminants. Between 1944 and 1988, Eldorado was a Federal Crown Corporation, and as such, the Canadian Federal Government has assumed responsibility for the clean-up and long-term management of the historic waste produced by Eldorado during this period. The Port Hope Project involves the construction and development of a new long-term waste management facility (LTWMF), and the remediation and transfer of the historic wastes located within the Municipality of Port Hope to the new LTWMF. The new LTWMF will consist of an engineered above-ground containment mound designed to contain and isolate the wastes from the surrounding environment for the next several hundred years. The design of the engineered containment mound consists of a primary and secondary composite base liner system and composite final cover system, made up of both natural materials (e.g., compacted clay, granular materials) and synthetic materials (e.g., geo-synthetic clay liner, geo-membrane, geo-textiles). The engineered containment mound will cover an area of approximately 13 hectares and will contain the estimated 1.2 million cubic metres of waste that will be generated from the remedial activities within Port Hope. The LTWMF will also include infrastructure and support facilities such as access roads, administrative offices, laboratory, equipment and personnel decontamination facilities, waste water treatment plant and other ancillary facilities. Preliminary

  14. Sagittal Abdominal Diameter and Visceral Adiposity

    PubMed Central

    Kahn, Henry S.; Gasevic, Danijela; Liang, Zhe; Frediani, Jennifer K.; Torres, William E.; Ziegler, Thomas R.; Phillips, Lawrence S.; Lin, Edward

    2013-01-01

    Background In the context of increasing obesity prevalence, the relationship between large visceral adipose tissue (VAT) volumes and type 2 diabetes mellitus (T2DM) is unclear. In a clinical sample of severely obese women (mean body mass index [BMI], 46 kg/m2) with fasting normoglycemia (n=40) or dysglycemia (impaired fasting glucose+diabetes; n=20), we sought to determine the usefulness of anthropometric correlates of VAT and associations with dysglycemia. Methods VAT volume was estimated using multi-slice computer tomography; anthropometric surrogates included sagittal abdominal diameter (SAD), waist circumference (WC) and BMI. Insulin sensitivity (Si), and beta-cell dysfunction, measured by insulin secretion (AIRg) and the disposition index (DI), were determined by frequently sampled intravenous glucose tolerance test. Results Compared to fasting normoglycemic women, individuals with dysglycemia had greater VAT (P<0.001) and SAD (P=0.04), but BMI, total adiposity and Si were similar. VAT was inversely associated with AIRg and DI after controlling for ancestry, Si, and total adiposity (standardized beta, −0.32 and −0.34, both P<0.05). In addition, SAD (beta=0.41, P=0.02) was found to be a better estimate of VAT volume than WC (beta=0.32, P=0.08) after controlling for covariates. Receiver operating characteristic analysis showed that VAT volume, followed by SAD, outperformed WC and BMI in identifying dysglycemic participants. Conclusions Increasing VAT is associated with beta-cell dysfunction and dysglycemia in very obese women. In the presence of severe obesity, SAD is a simple surrogate of VAT, and an indicator of glucose dysregulation. PMID:23408092

  15. Torsion of an accessory spleen: a rare case preoperatively diagnosed and cured by single-port surgery.

    PubMed

    Ozeki, Maiko; Asakuma, Mitsuhiro; Go, Nakai; Ogura, Takeshi; Inoue, Yoshihiro; Shimizu, Tetsunosuke; Hirokawa, Fumitoshi; Yamamoto, Kazuhiro; Hayashi, Michihiro; Narumi, Yoshifumi; Higuchi, Kazuhide; Uchiyama, Kazuhisa

    2015-12-01

    We report a very rare case of acute abdomen caused by torsion of an accessory spleen that was preoperatively diagnosed and cured by single-port surgery. A 31-year-old woman was admitted to our hospital with severe left abdominal pain. Physical examination revealed a left upper quadrant abdominal tenderness with voluntary guarding. Ultrasound demonstrated a well-defined round mass isoechoic to the spleen, measuring 3.0 cm in diameter in the left upper quadrant adjacent to the spleen. A contrast-enhanced CT scan showed a normally enhanced spleen and a 3.0 × 3.0, hypodense, non-enhancing mass anterior to the spleen with a twisted funicular structure. Torsion of an accessory spleen was suspected, and emergency single-port surgery was performed. During surgery, a rounded violet mass measuring 3.0 cm in diameter, suggestive of an accessory spleen, with a 1800° torsion around a long vascular pedicle along the left side of the greater omentum was discovered. The mass was removed and post-operative recovery was uneventful. A review of the literature revealed 26 cases (including ours) of torsion of an accessory spleen in English. Even with the recent advances in radiologic imaging modalities, making a preoperative diagnosis of this is difficult and most cases are diagnosed during laparotomy. This is the first report preoperatively diagnosed and cured by single-port surgery. We decided to start the operation by using a single port, not only for cosmetic reasons for this young female patient, but also for final confirmation of our diagnosis. We believe that single-port laparoscopy is valuable as a diagnostic tool as long as safety is assured for patients with acute abdomen. Although torsion of an accessory spleen is extremely rare, it should be considered in the differential diagnosis of acute abdomen in children and young adults. PMID:26943424

  16. Hemodialysis access - self care

    MedlinePlus

    Kidney failure - chronic-hemodialysis access; Renal failure - chronic-hemodialysis access; Chronic renal insufficiency - hemodialysis access; Chronic kidney failure - hemodialysis access; Chronic renal failure - hemodialysis access; dialysis - hemodialysis access

  17. Instability of Reference Diameter in the Evaluation of Stenosis After Coronary Angioplasty: Percent Diameter Stenosis Overestimates Dilative Effects Due to Reference Diameter Reduction

    SciTech Connect

    Hirami, Ryouichi; Iwasaki, Kohichiro; Kusachi, Shozo; Murakami, Takashi; Hina, Kazuyoshi; Matano, Shigeru; Murakami, Masaaki; Kita, Toshimasa; Sakakibara, Noburu; Tsuji, Takao

    2000-03-15

    Purpose: To examine changes in the reference segment luminal diameter after coronary angioplasty.Methods: Sixty-one patients with stable angina pectoris or old myocardial infarction were examined. Coronary angiograms were recorded before coronary angioplasty (pre-angioplasty) and immediately after (post-angioplasty), as well as 3 months after. Artery diameters were measured on cine-film using quantitative coronary angiographic analysis.Results: The diameters of the proximal segment not involved in the balloon inflation and segments in the other artery did not change significantly after angioplasty, but the reference segment diameter significantly decreased (4.7%). More than 10% luminal reduction was observed in seven patients (11%) and more than 5% reduction was observed in 25 patients (41%). More than 5% underestimation of the stenosis was observed in 22 patients (36%) when the post-angioplasty reference diameter was used as the reference diameter, compared with when the pre-angioplasty measurement was used and more than 10% underestimation was observed in five patients (8%).Conclusion: This study indicated that evaluation by percent diameter stenosis, with the reference diameter from immediately after angioplasty, overestimates the dilative effects of coronary angioplasty, and that it is thus better to evaluate the efficacy of angioplasty using the absolute diameter in addition to percent luminal stenosis.

  18. Nineteen-Foot Diameter Explosively Driven Blast Simulator

    SciTech Connect

    VIGIL,MANUEL G.

    2001-07-01

    This report describes the 19-foot diameter blast tunnel at Sandia National Laboratories. The blast tunnel configuration consists of a 6 foot diameter by 200 foot long shock tube, a 6 foot diameter to 19 foot diameter conical expansion section that is 40 feet long, and a 19 foot diameter test section that is 65 feet long. Therefore, the total blast tunnel length is 305 feet. The development of this 19-foot diameter blast tunnel is presented. The small scale research test results using 4 inch by 8 inch diameter and 2 foot by 6 foot diameter shock tube facilities are included. Analytically predicted parameters are compared to experimentally measured blast tunnel parameters in this report. The blast tunnel parameters include distance, time, static, overpressure, stagnation pressure, dynamic pressure, reflected pressure, shock Mach number, flow Mach number, shock velocity, flow velocity, impulse, flow duration, etc. Shadowgraphs of the shock wave are included for the three different size blast tunnels.

  19. Placement of a port catheter through collateral veins in a patient with central venous occlusion.

    PubMed

    Teichgräber, Ulf Karl-Martin; Streitparth, Florian; Gebauer, Bernhard; Benter, Thomas

    2010-04-01

    Long-term utilization of central venous catheters (CVCs) for parenteral nutrition has a high incidence of central venous complications including infections, occlusions, and stenosis. We report the case of a 31-year-old woman presenting with a malabsorption caused by short gut syndrome due to congenital aganglionic megacolon. The patient developed a chronic occlusion of all central neck and femoral veins due to long-term use of multiple CVCs over more than 20 years. In patients with central venous occlusion and venous transformation, the implantation of a totally implanted port system by accessing collateral veins is an option to continue long-term parenteral nutrition when required. A 0.014-in. Whisper guidewire (Terumo, Tokyo) with high flexibility and steerability was chosen to maneuver and pass through the collateral veins. We suggest this approach to avoid unfavorable translumbar or transhepatic central venous access and to conserve the anatomically limited number of percutaneous access sites.

  20. Placement of a Port Catheter Through Collateral Veins in a Patient with Central Venous Occlusion

    SciTech Connect

    Teichgraeber, Ulf Karl-Martin Streitparth, Florian; Gebauer, Bernhard; Benter, Thomas

    2010-04-15

    Long-term utilization of central venous catheters (CVCs) for parenteral nutrition has a high incidence of central venous complications including infections, occlusions, and stenosis. We report the case of a 31-year-old woman presenting with a malabsorption caused by short gut syndrome due to congenital aganglionic megacolon. The patient developed a chronic occlusion of all central neck and femoral veins due to long-term use of multiple CVCs over more than 20 years. In patients with central venous occlusion and venous transformation, the implantation of a totally implanted port system by accessing collateral veins is an option to continue long-term parenteral nutrition when required. A 0.014-in. Whisper guidewire (Terumo, Tokyo) with high flexibility and steerability was chosen to maneuver and pass through the collateral veins. We suggest this approach to avoid unfavorable translumbar or transhepatic central venous access and to conserve the anatomically limited number of percutaneous access sites.

  1. The diameter-dependent photoelectrochemical performance of silicon nanowires.

    PubMed

    Zhang, Bing-Chang; Wang, Hui; He, Le; Duan, Chun-Yang; Li, Fan; Ou, Xue-Mei; Sun, Bao-Quan; Zhang, Xiao-Hong

    2016-01-25

    We demonstrate the first systematic study of the diameter-dependent photoelectrochemical performance of single silicon nanowires within a broad size range from 200 to 2000 nm. SiNWs with a diameter of 1415 nm exhibit the highest solar energy conversion efficiency, which can be mainly traced to their diameter-dependent light absorption properties.

  2. Easy Access

    ERIC Educational Resources Information Center

    Gettelman, Alan

    2009-01-01

    School and university restrooms, locker and shower rooms have specific ADA accessibility requirements that serve the needs of staff, students and campus visitors who are disabled as a result of injury, illness or age. Taking good care of them is good for the reputation of a sensitive community institution, and fosters positive public relations.…

  3. Access Denied

    ERIC Educational Resources Information Center

    Raths, David

    2012-01-01

    As faculty members add online and multimedia elements to their courses, colleges and universities across the country are realizing that there is a lot of work to be done to ensure that disabled students (and employees) have equal access to course material and university websites. Unfortunately, far too few schools consider the task a top priority.…

  4. Expanding Access

    ERIC Educational Resources Information Center

    Roach, Ronald

    2007-01-01

    There is no question that the United States lags behind most industrialized nations in consumer access to broadband Internet service. For many policy makers and activists, this shortfall marks the latest phase in the struggle to overcome the digital divide. To remedy this lack of broadband affordability and availability, one start-up firm--with…

  5. 19 CFR 10.81 - Use in any port.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Use in any port. 10.81 Section 10.81 Customs....81 Use in any port. (a) Salt withdrawn under bond for use in curing fish on the shores of navigable waters may be used for such purpose at any port, but the evidence of use in such cases shall be...

  6. 46 CFR 42.15-70 - Freeing ports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Freeing ports. 42.15-70 Section 42.15-70 Shipping COAST... Conditions of Assignment of Freeboard § 42.15-70 Freeing ports. (a) Where bulwarks on the weather portions of... freeing port area (A) on each side of the vessel for each well on the freeboard deck shall be that...

  7. 19 CFR 18.22 - Procedure at port of exit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Procedure at port of exit. 18.22 Section 18.22... to Foreign Countries § 18.22 Procedure at port of exit. (a) If transfer is necessary, the procedure shall be as prescribed in § 18.3(d). (b) Upon the arrival at the port of exit of express shipments...

  8. 46 CFR 45.117 - Freeing port area: General.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Freeing port area: General. 45.117 Section 45.117... Conditions of Assignment § 45.117 Freeing port area: General. (a) Where bulwarks on the weather portins of... §§ 45.119 and 45.121 the minimum freeing port area in square feet on each side of the ship for each...

  9. 46 CFR 42.15-70 - Freeing ports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Freeing ports. 42.15-70 Section 42.15-70 Shipping COAST... Conditions of Assignment of Freeboard § 42.15-70 Freeing ports. (a) Where bulwarks on the weather portions of... freeing port area (A) on each side of the vessel for each well on the freeboard deck shall be that...

  10. 46 CFR 45.117 - Freeing port area: General.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Freeing port area: General. 45.117 Section 45.117... Conditions of Assignment § 45.117 Freeing port area: General. (a) Where bulwarks on the weather portins of... §§ 45.119 and 45.121 the minimum freeing port area in square feet on each side of the ship for each...

  11. 19 CFR 18.22 - Procedure at port of exit.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Procedure at port of exit. 18.22 Section 18.22... to Foreign Countries § 18.22 Procedure at port of exit. (a) If transfer is necessary, the procedure shall be as prescribed in § 18.3(d). (b) Upon the arrival at the port of exit of express shipments...

  12. Device having two optical ports for switching applications

    DOEpatents

    Rosen, Ayre; Stabile, Paul J.

    1991-09-24

    A two-sided light-activatable semiconductor switch device having an optical port on each side thereof. The semiconductor device may be a p-i-n diode or of bulk intrinsic material. A two ported p-i-n diode, reverse-biased to "off" by a 1.3 kV dc power supply, conducted 192 A when activated by two 1 kW laser diode arrays, one for each optical port.

  13. Diameter-selective separation of double-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Kim, Jin Hee; Kataoka, Masakazu; Kim, Yoong Ahm; Shimamoto, Daisuke; Muramatsu, Hiroyuki; Hayashi, Takuya; Endo, Morinobu; Terrones, Mauricio; Dresselhaus, Mildred S.

    2008-12-01

    Here, we report a simple and effective way of separating double-walled carbon nanotubes as a function of their diameter using individually dispersed nanotube solutions with the aid of long and random single-stranded DNA. The subtle pH change in nanotube solutions gives rise to the preferential coagulation of large-diameter tubes and allows the easy preparation of small-diameter tubes. The stronger van der Waals forces between large-diameter tubes, combined with the decreased solubility of DNA in water at low pH, lead to the preferential agglomeration of large-diameter tubes.

  14. Design principles of the PORT library

    NASA Technical Reports Server (NTRS)

    Fox, P.

    1978-01-01

    The design of PORT stemmed from the basic principles of portability and ease of use. The attributes and mechanisms used in the library to support this philosophy include the use of a portable subset of FORTRAN, and the use of (machine-dependent) functions to supply the necessary environment parameters. Abbreviated calling sequences are mede possible by a simplified error-handling technique, and by the use of a portable stack allocator for temporary workspace. Experiences to date with these approaches, and plans for the future are reviewed.

  15. Recent sedimentation, northeastern Port Valdez, Alaska

    NASA Astrophysics Data System (ADS)

    Palmer, Harold D.

    1981-09-01

    Sediments accumulating on the northeastern shore of Port Valdez, a fjord leading to Prince William Sound in southern Alaska, are derived from both deltaic and alluvial fan processes. The resulting thick wedge of Recent silts, sands, shells and gravels lies atop irregular ridges of local graywacke bedrock and scattered till deposits. Seismic reflection profiling augmented by soil borings indicates that rapid infilling and upbuilding has occurred at this site. Evidence of slumping suggests general instability of steep submarine slopes in an area characterized by strong earthquakes and large tidal ranges.

  16. Vapor port and groundwater sampling well

    DOEpatents

    Hubbell, Joel M.; Wylie, Allan H.

    1996-01-01

    A method and apparatus has been developed for combining groundwater monitoring wells with unsaturated-zone vapor sampling ports. The apparatus allows concurrent monitoring of both the unsaturated and the saturated zone from the same well at contaminated areas. The innovative well design allows for concurrent sampling of groundwater and volatile organic compounds (VOCs) in the vadose (unsaturated) zone from a single well, saving considerable time and money. The sample tubes are banded to the outer well casing during installation of the well casing.

  17. Vapor port and groundwater sampling well

    DOEpatents

    Hubbell, J.M.; Wylie, A.H.

    1996-01-09

    A method and apparatus have been developed for combining groundwater monitoring wells with unsaturated-zone vapor sampling ports. The apparatus allows concurrent monitoring of both the unsaturated and the saturated zone from the same well at contaminated areas. The innovative well design allows for concurrent sampling of groundwater and volatile organic compounds (VOCs) in the vadose (unsaturated) zone from a single well, saving considerable time and money. The sample tubes are banded to the outer well casing during installation of the well casing. 10 figs.

  18. 77 FR 49351 - Safety Zone; Port Huron Float-Down, St. Clair River, Port Huron, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-16

    ... Department of Homeland Security FR Federal Register NPRM Notice of Proposed Rulemaking A. Regulatory History... enforced a ] safety on August 21st (76 FR 52269). Consequently, not only is it impracticable and contrary... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Port Huron Float-Down, St. Clair...

  19. 78 FR 24069 - Safety Zone; 12th Annual Saltwater Classic; Port Canaveral Harbor; Port Canaveral, FL

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-24

    .... SUPPLEMENTARY INFORMATION: Table of Acronyms DHS Department of Homeland Security FR Federal Register NPRM Notice... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; 12th Annual Saltwater Classic; Port... Canaveral, Florida during the 12th Annual Saltwater Classic. The event is scheduled to take place...

  20. 21 CFR 880.5965 - Subcutaneous, implanted, intravascular infusion port and catheter.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... port and catheter. 880.5965 Section 880.5965 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... port and catheter. (a) Identification. A subcutaneous, implanted, intravascular infusion port and... catheter is either preattached to the port or attached to the port at the time of device placement....

  1. 33 CFR 165.1125 - Southern California Annual Firework Events for the Los Angeles Long Beach Captain of the Port zone.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Firework Events for the Los Angeles Long Beach Captain of the Port zone. 165.1125 Section 165.1125... Limited Access Areas Eleventh Coast Guard District § 165.1125 Southern California Annual Firework Events... local agencies. Table 1 to § 165.1125 1. Cambria American Legion Post Fourth of July Fireworks...

  2. 33 CFR 165.1125 - Southern California Annual Firework Events for the Los Angeles Long Beach Captain of the Port zone.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Firework Events for the Los Angeles Long Beach Captain of the Port zone. 165.1125 Section 165.1125... Limited Access Areas Eleventh Coast Guard District § 165.1125 Southern California Annual Firework Events... local agencies. Table 1 to § 165.1125 1. Cambria American Legion Post Fourth of July Fireworks...

  3. 33 CFR 165.1125 - Southern California Annual Firework Events for the Los Angeles Long Beach Captain of the Port zone.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Firework Events for the Los Angeles Long Beach Captain of the Port zone. 165.1125 Section 165.1125... Limited Access Areas Eleventh Coast Guard District § 165.1125 Southern California Annual Firework Events... local agencies. Table 1 to § 165.1125 1. Cambria American Legion Post Fourth of July Fireworks...

  4. Single-Incision Multi-Port Appendectomy for a Patient with Situs Inversus Totalis

    PubMed Central

    Rajkumar, J. S.; Syed, Akbar; Anirudh, J.R.; Kishor, C.M.; Ganesh, Deepa

    2016-01-01

    Situs inversus totalis (SIT) is a rare autosomal recessive condition involving the complete lateral transposition of the organs. When individuals with this condition suffer from appendicitis, associated pain and symptoms are usually present on the left side, resulting in diagnostic difficulties. Moreover, the laparoscopic removal of the left-sided appendix may pose practical problems during surgery. Removal of an inflamed appendix is generally performed using a multiple-port laparoscopy. We report a 22-year-old male who presented to the Lifeline Institute of Minimal Access Surgery in Chennai, India, in April 2015 with pain in the left iliac fossa. Chest X-rays and ultrasonography confirmed SIT with an acutely inflamed appendix on the left side. The patient underwent a single-incision multi-port laparoscopic appendectomy with a successful outcome. To the best of the authors’ knowledge, this is the first report in the literature of a single-incision multi-port appendectomy in a patient with SIT. PMID:27226919

  5. Flexing the frame: contemplating the use of multiple ports of entry in parent-infant psychotherapy.

    PubMed

    Dugmore, Nicola

    2014-01-01

    Multirelational interventions are well described in the psychoanalytic parent-infant literature. Daniel Stern (1995) originally suggested and described five "ports of entry" that may be employed to access the multiperson parent-infant clinical system. Other authors have elaborated and extended Stern's original list of ports of entry. The impact of using multiple ports of entry on the psychoanalytic frame, however, is largely neglected in the parent-infant psychotherapy literature. Danielle Quinodoz's (1992) four facets of the psychoanalytic setting are used to structure a discussion of how the multiplicities associated with parent-infant psychotherapy may impact the frame. The article argues strongly for a necessary flexing of the psychoanalytic frame to establish therapeutic alliances. A fifth facet, that of psychoanalytic mindfulness, is offered as a counterbalance to the risks associated with excessive flexing of the frame, particularly in relation to Quinodoz's fourth facet of "refraining from 'doing.'" This article relies on case material to illustrate the issues under discussion. Further engagement and debate are invited.

  6. Reinforcement learning for port-hamiltonian systems.

    PubMed

    Sprangers, Olivier; Babuška, Robert; Nageshrao, Subramanya P; Lopes, Gabriel A D

    2015-05-01

    Passivity-based control (PBC) for port-Hamiltonian systems provides an intuitive way of achieving stabilization by rendering a system passive with respect to a desired storage function. However, in most instances the control law is obtained without any performance considerations and it has to be calculated by solving a complex partial differential equation (PDE). In order to address these issues we introduce a reinforcement learning (RL) approach into the energy-balancing passivity-based control (EB-PBC) method, which is a form of PBC in which the closed-loop energy is equal to the difference between the stored and supplied energies. We propose a technique to parameterize EB-PBC that preserves the systems's PDE matching conditions, does not require the specification of a global desired Hamiltonian, includes performance criteria, and is robust. The parameters of the control law are found by using actor-critic (AC) RL, enabling the search for near-optimal control policies satisfying a desired closed-loop energy landscape. The advantage is that the solutions learned can be interpreted in terms of energy shaping and damping injection, which makes it possible to numerically assess stability using passivity theory. From the RL perspective, our proposal allows for the class of port-Hamiltonian systems to be incorporated in the AC framework, speeding up the learning thanks to the resulting parameterization of the policy. The method has been successfully applied to the pendulum swing-up problem in simulations and real-life experiments. PMID:25167564

  7. Single port radical prostatectomy: current status.

    PubMed

    Martín, Oscar Darío; Azhar, Raed A; Clavijo, Rafael; Gidelman, Camilo; Medina, Luis; Troche, Nelson Ramirez; Brunacci, Leonardo; Sotelo, René

    2016-06-01

    The aim of this study is to analyze the current literature on single port radical prostatectomy (LESS-RP). Single port radical prostatectomy laparoendoscopic (LESS-RP) has established itself as a challenge for urological community, starting with the proposal of different approaches: extraperitoneal, transperitoneal and transvesical, initially described for laparoscopy and then laparoscopy robot-assisted. In order to improve the LESS-RP, new instruments, optical devices, trocars and retraction mechanisms have been developed. Advantages and disadvantages of LESS-RP are controversial, while some claim that it is a non-trustable approach, regarding the low cases number and technical difficulties, others acclaim that despite this facts some advantages have been shown and that previous described difficulties are being overcome, proving this is novel proposal of robotics platform, the Da Vinci SP, integrating the system into "Y". The LESS-RP approach gives us a new horizon and opens the door for rapid standardization of this technique. The few studies and short series available can be result of a low interest in the application of LESS-RP in prostate, probably because of the technical complexity that it requires. The new robotic platform, the da Vinci SP, shows that it is clear that the long awaited evolution of robotic technologies for laparoscopy has begun, and we must not lose this momentum.

  8. Reinforcement learning for port-hamiltonian systems.

    PubMed

    Sprangers, Olivier; Babuška, Robert; Nageshrao, Subramanya P; Lopes, Gabriel A D

    2015-05-01

    Passivity-based control (PBC) for port-Hamiltonian systems provides an intuitive way of achieving stabilization by rendering a system passive with respect to a desired storage function. However, in most instances the control law is obtained without any performance considerations and it has to be calculated by solving a complex partial differential equation (PDE). In order to address these issues we introduce a reinforcement learning (RL) approach into the energy-balancing passivity-based control (EB-PBC) method, which is a form of PBC in which the closed-loop energy is equal to the difference between the stored and supplied energies. We propose a technique to parameterize EB-PBC that preserves the systems's PDE matching conditions, does not require the specification of a global desired Hamiltonian, includes performance criteria, and is robust. The parameters of the control law are found by using actor-critic (AC) RL, enabling the search for near-optimal control policies satisfying a desired closed-loop energy landscape. The advantage is that the solutions learned can be interpreted in terms of energy shaping and damping injection, which makes it possible to numerically assess stability using passivity theory. From the RL perspective, our proposal allows for the class of port-Hamiltonian systems to be incorporated in the AC framework, speeding up the learning thanks to the resulting parameterization of the policy. The method has been successfully applied to the pendulum swing-up problem in simulations and real-life experiments.

  9. Assessing noise sources at synchrotron infrared ports

    PubMed Central

    Lerch, Ph.; Dumas, P.; Schilcher, T.; Nadji, A.; Luedeke, A.; Hubert, N.; Cassinari, L.; Boege, M.; Denard, J.-C.; Stingelin, L.; Nadolski, L.; Garvey, T.; Albert, S.; Gough, Ch.; Quack, M.; Wambach, J.; Dehler, M.; Filhol, J.-M.

    2012-01-01

    Today, the vast majority of electron storage rings delivering synchrotron radiation for general user operation offer a dedicated infrared port. There is growing interest expressed by various scientific communities to exploit the mid-IR emission in microspectroscopy, as well as the far infrared (also called THz) range for spectroscopy. Compared with a thermal (laboratory-based source), IR synchrotron radiation sources offer enhanced brilliance of about two to three orders of magnitude in the mid-IR energy range, and enhanced flux and brilliance in the far-IR energy range. Synchrotron radiation also has a unique combination of a broad wavelength band together with a well defined time structure. Thermal sources (globar, mercury filament) have excellent stability. Because the sampling rate of a typical IR Fourier-transform spectroscopy experiment is in the kHz range (depending on the bandwidth of the detector), instabilities of various origins present in synchrotron radiation sources play a crucial role. Noise recordings at two different IR ports located at the Swiss Light Source and SOLEIL (France), under conditions relevant to real experiments, are discussed. The lowest electron beam fluctuations detectable in IR spectra have been quantified and are shown to be much smaller than what is routinely recorded by beam-position monitors. PMID:22186638

  10. An overview of San Francisco Bay PORTS

    USGS Publications Warehouse

    Cheng, Ralph T.; McKinnie, David; English, Chad; Smith, Richard E.

    1998-01-01

    The Physical Oceanographic Real-Time System (PORTS) provides observations of tides, tidal currents, and meteorological conditions in real-time. The San Francisco Bay PORTS (SFPORTS) is a decision support system to facilitate safe and efficient maritime commerce. In addition to real-time observations, SFPORTS includes a nowcast numerical model forming a San Francisco Bay marine nowcast system. SFPORTS data and nowcast numerical model results are made available to users through the World Wide Web (WWW). A brief overview of SFPORTS is presented, from the data flow originated at instrument sensors to final results delivered to end users on the WWW. A user-friendly interface for SFPORTS has been designed and implemented. Appropriate field data analysis, nowcast procedures, design and generation of graphics for WWW display of field data and nowcast results are presented and discussed. Furthermore, SFPORTS is designed to support hazardous materials spill prevention and response, and to serve as resources to scientists studying the health of San Francisco Bay ecosystem. The success (or failure) of the SFPORTS to serve the intended user community is determined by the effectiveness of the user interface.

  11. Assessing noise sources at synchrotron infrared ports.

    PubMed

    Lerch, Ph; Dumas, P; Schilcher, T; Nadji, A; Luedeke, A; Hubert, N; Cassinari, L; Boege, M; Denard, J-C; Stingelin, L; Nadolski, L; Garvey, T; Albert, S; Gough, Ch; Quack, M; Wambach, J; Dehler, M; Filhol, J-M

    2012-01-01

    Today, the vast majority of electron storage rings delivering synchrotron radiation for general user operation offer a dedicated infrared port. There is growing interest expressed by various scientific communities to exploit the mid-IR emission in microspectroscopy, as well as the far infrared (also called THz) range for spectroscopy. Compared with a thermal (laboratory-based source), IR synchrotron radiation sources offer enhanced brilliance of about two to three orders of magnitude in the mid-IR energy range, and enhanced flux and brilliance in the far-IR energy range. Synchrotron radiation also has a unique combination of a broad wavelength band together with a well defined time structure. Thermal sources (globar, mercury filament) have excellent stability. Because the sampling rate of a typical IR Fourier-transform spectroscopy experiment is in the kHz range (depending on the bandwidth of the detector), instabilities of various origins present in synchrotron radiation sources play a crucial role. Noise recordings at two different IR ports located at the Swiss Light Source and SOLEIL (France), under conditions relevant to real experiments, are discussed. The lowest electron beam fluctuations detectable in IR spectra have been quantified and are shown to be much smaller than what is routinely recorded by beam-position monitors.

  12. Single port radical prostatectomy: current status.

    PubMed

    Martín, Oscar Darío; Azhar, Raed A; Clavijo, Rafael; Gidelman, Camilo; Medina, Luis; Troche, Nelson Ramirez; Brunacci, Leonardo; Sotelo, René

    2016-06-01

    The aim of this study is to analyze the current literature on single port radical prostatectomy (LESS-RP). Single port radical prostatectomy laparoendoscopic (LESS-RP) has established itself as a challenge for urological community, starting with the proposal of different approaches: extraperitoneal, transperitoneal and transvesical, initially described for laparoscopy and then laparoscopy robot-assisted. In order to improve the LESS-RP, new instruments, optical devices, trocars and retraction mechanisms have been developed. Advantages and disadvantages of LESS-RP are controversial, while some claim that it is a non-trustable approach, regarding the low cases number and technical difficulties, others acclaim that despite this facts some advantages have been shown and that previous described difficulties are being overcome, proving this is novel proposal of robotics platform, the Da Vinci SP, integrating the system into "Y". The LESS-RP approach gives us a new horizon and opens the door for rapid standardization of this technique. The few studies and short series available can be result of a low interest in the application of LESS-RP in prostate, probably because of the technical complexity that it requires. The new robotic platform, the da Vinci SP, shows that it is clear that the long awaited evolution of robotic technologies for laparoscopy has begun, and we must not lose this momentum. PMID:27072150

  13. Fiber diameter distributions in the chinchilla's ampullary nerves

    NASA Technical Reports Server (NTRS)

    Hoffman, Larry F.; Honrubia, Vicente

    2002-01-01

    A morphometric study of the chinchilla's ampullary nerves was conducted to produce an unbiased accounting of the diameter distribution of their constituent fibers. Diameter analyses were determined from 1 microm plastic-embedded nerve sections taken at a plane immediately proximal to the sensory epithelium. We found these nerves to be composed of 2094+/-573 fibers, having diameters that ranged from 0.5 to 8 microm. The distributions of diameters were positively skewed, where approximately 75% of the fibers were found to have diameters less than 3.5 microm. An analysis of the spatial distribution of diameters within the nerve section revealed that the lateralmost areas of the nerve contained larger fractions of fibers within the smallest diameter quintiles, and the central area harbored greater proportions of the larger diameter quintiles. However, significant fractions of all quintiles were found in all areas. These data were integrated with available data of Fernandez et al. (1998) to produce diameter estimates of calyx, dimorphic, and bouton morphology subpopulations. In view of a general relationship between diameter, innervation locus, and an afferent's physiologic characteristics, these data provide the basis for developing a perspective for the in situ distribution of afferent response dynamics.

  14. Hemodialysis access procedures

    MedlinePlus

    Kidney failure - chronic-dialysis access; Renal failure - chronic-dialysis access; Chronic renal insufficiency-dialysis access; Chronic kidney failure-dialysis access; Chronic renal failure-dialysis access

  15. 19 CFR 19.23 - Withdrawal for exportation from one port to be credited on warehouse entry account at another port.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Withdrawal for exportation from one port to be credited on warehouse entry account at another port. 19.23 Section 19.23 Customs Duties U.S. CUSTOMS AND... for exportation from one port to be credited on warehouse entry account at another port....

  16. 33 CFR 165.T08-0432 - Safety Zone; Waterway Closure, Morgan City-Port Allen Route from Mile Marker 0 to Port Allen Lock.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Safety Zone; Waterway Closure, Morgan City-Port Allen Route from Mile Marker 0 to Port Allen Lock. 165.T08-0432 Section 165.T08-0432...-Port Allen Route from Mile Marker 0 to Port Allen Lock. (a) Location. Waters of the Gulf...

  17. Qingdao Port Cardiovascular Health Study: a prospective cohort study

    PubMed Central

    Spatz, Erica S; Jiang, Xianyan; Lu, Jiapeng; Masoudi, Frederick A; Spertus, John A; Wang, Yongfei; Li, Xi; Downing, Nicholas S; Nasir, Khurram; Du, Xue; Li, Jing; Krumholz, Harlan M; Liu, Xiancheng; Jiang, Lixin

    2015-01-01

    Purpose In China, efforts are underway to respond to rapidly increasing rates of heart disease and stroke. Yet the epidemiology of cardiovascular disease in China may be different from that of other populations. Thus, there is a critical need for population-based studies that provide insight into the risk factors, incidence and outcomes of cardiovascular disease in China. The Qingdao Port Cardiovascular Health Study is designed to investigate the burden of cardiovascular disease and the sociodemographic, biological, environmental and clinical risk factors associated with disease onset and outcomes. Participants For this study, from 2000 through 2013, 32 404 employees aged 18 years or older were recruited from the Qingdao Port Group in China, contributing 221 923 annual health assessments. The mean age at recruitment was 43.4 (SD=12.9); 79% were male. In this ongoing study, annual health assessments, governed by extensive quality control mechanisms, include a questionnaire (capturing demographic and employment information, medical history, medication use, health behaviours and health outcomes), physical examination, ECG, and blood and urine analysis. Additional non-annual assessments include an X-ray, echocardiogram and carotid ultrasound; bio-samples will be collected for future genetic and proteomic analyses. Cardiovascular outcomes are accessed via self-report and are actively being verified with medical insurance claims; efforts are underway to adjudicate outcomes with hospital medical records. Findings to date Early findings reveal a significant increase in cardiovascular risk factors from 2000 to 2010 (hypertension: 26.4–39.4%; diabetes: 3.3–8.9%; hyperlipidaemia: 5.0–33.6%; body mass index >28 m/kg2: 14.1–18.6%). Future Plans We aim to generate novel insights about the epidemiology and outcomes of cardiovascular disease in China, with specific emphasis on the potentially unique risk factor profiles of this Chinese population. Knowledge

  18. 48 CFR 47.305-6 - Shipments to ports and air terminals.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... transportation costs are concerned. (d) Unless logistics requirements limit the ports of loading to the ports... between the ports involved, unless the acquiring activity has given other specific instructions....

  19. 33 CFR 80.1440 - Port Allen, Kauai, HI.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Port Allen, Kauai, HI. 80.1440 Section 80.1440 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Islands § 80.1440 Port Allen, Kauai, HI. A line drawn...

  20. 33 CFR 80.1440 - Port Allen, Kauai, HI.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Port Allen, Kauai, HI. 80.1440 Section 80.1440 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Islands § 80.1440 Port Allen, Kauai, HI. A line drawn...

  1. 33 CFR 80.1440 - Port Allen, Kauai, HI.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Port Allen, Kauai, HI. 80.1440 Section 80.1440 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Islands § 80.1440 Port Allen, Kauai, HI. A line drawn...

  2. 33 CFR 80.1440 - Port Allen, Kauai, HI.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Port Allen, Kauai, HI. 80.1440 Section 80.1440 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Islands § 80.1440 Port Allen, Kauai, HI. A line drawn...

  3. 37. ENGINE ROOM, FROM PORT SIDE OF CONTROL CONSOLE, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. ENGINE ROOM, FROM PORT SIDE OF CONTROL CONSOLE, LOOKING TOWARDS STERN, PORT ENGINE AT RIGHT, STARBOARD ENGINE AT LEFT, BOTH ARE DIESEL ENGINES, IN BACKGROUND IS STAIRS UP TO CREWS' BERTHING, BEYONE THE STAIRS IS THE DOOR TO AFT ENGINE ROOM & MACHINE SHOP. - U.S. Coast Guard Cutter WHITE HEATH, USGS Integrated Support Command Boston, 427 Commercial Street, Boston, Suffolk County, MA

  4. 46 CFR 188.10-6 - Captain of the Port.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Captain of the Port. 188.10-6 Section 188.10-6 Shipping... PROVISIONS Definition of Terms Used in This Subchapter § 188.10-6 Captain of the Port. This term means an... activities within his assigned area. In addition, the District Commander shall be the Captain of the...

  5. 46 CFR 171.118 - Automatic ventilators and side ports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Automatic ventilators and side ports. 171.118 Section... Bulkhead or Weather Deck § 171.118 Automatic ventilators and side ports. (a) An automatic ventilator must... Officer, Marine Safety Center. (b) The design and construction of each gangway, cargo and coaling...

  6. 46 CFR 188.10-6 - Captain of the Port.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Captain of the Port. 188.10-6 Section 188.10-6 Shipping... PROVISIONS Definition of Terms Used in This Subchapter § 188.10-6 Captain of the Port. This term means an... activities within his assigned area. In addition, the District Commander shall be the Captain of the...

  7. 27 CFR 28.267 - Exportation from interior port.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... provisions of U.S. Customs regulations (19 CFR chapter I). On completion of the lading, the seals shall be... port. 28.267 Section 28.267 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS EXPORTATION OF ALCOHOL Proceedings at Ports of Export §...

  8. 46 CFR 171.118 - Automatic ventilators and side ports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Automatic ventilators and side ports. 171.118 Section... Bulkhead or Weather Deck § 171.118 Automatic ventilators and side ports. (a) An automatic ventilator must... Officer, Marine Safety Center. (b) The design and construction of each gangway, cargo and coaling...

  9. 75 FR 13236 - FM Table of Allotments, Port Angeles, Washington

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-19

    ... applications. See 73 FR 75631, published December 12, 2008. In the first application (File No. BPH-20080710AJA... COMMISSION 47 CFR Part 73 FM Table of Allotments, Port Angeles, Washington AGENCY: Federal Communications... KSWW(FM), Montesano, Washington, to substitute FM Channel 271A for vacant Channel 229A at Port...

  10. 27 CFR 28.267 - Exportation from interior port.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... provisions of U.S. Customs regulations (19 CFR chapter I). On completion of the lading, the seals shall be... port. 28.267 Section 28.267 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS EXPORTATION OF ALCOHOL Proceedings at Ports of Export §...

  11. 33 CFR 80.1440 - Port Allen, Kauai, HI.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Port Allen, Kauai, HI. 80.1440 Section 80.1440 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Islands § 80.1440 Port Allen, Kauai, HI. A line drawn...

  12. 75. MISSISSIPPI, MONROE COUNTY, ARMORY COTTON GIN PORT BRIDGE Dirt ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    75. MISSISSIPPI, MONROE COUNTY, ARMORY COTTON GIN PORT BRIDGE Dirt road SW from Amory to River Cotton Gin Port road bridge. Copy of photo taken in 1932 by Jack Donnell, Columbus Mississippi. Sarcone Photography, Columbus, MS., Sept. 1978 - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  13. Safety shield for vacuum/pressure chamber viewing port

    NASA Technical Reports Server (NTRS)

    Shimansky, R. A.; Spencer, R. S. (Inventor)

    1981-01-01

    Observers are protected from flying debris resulting from a failure of a vacuum or pressure chamber viewing port following an implosion or explosion by an optically clear shatter resistant safety shield which spaced apart from the viewing port on the outer surface of the chamber.

  14. Multiple basal cell carcinomas arising in port-wine haemangiomas.

    PubMed

    Magaña-García, M; Magaña-Lozano, M

    1988-09-01

    We report the case of a 49-year-old man, who had had two port-wine stains from birth, in which many basal cell carcinomas developed during his forties. The appearance of multiple basal cell carcinomas in port-wine stains has not been reported previously to our knowledge and may represent a new syndrome.

  15. 77 FR 75823 - Closing of the Port of Whitetail, MT

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-26

    ...) in the Federal Register (76 FR 52890), proposing to close the port of entry of Whitetail, Montana... average of 1,261 cars and 57 trucks and the port's total annual operating cost of $492,000, it currently... travel time would cause them to discontinue their frequent trips from Canada to the United States to...

  16. 33 CFR 165.1703 - Ammunition Island, Port Valdez, Alaska.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Ammunition Island, Port Valdez... Ammunition Island, Port Valdez, Alaska. (a) Location. The waters within the following boundaries is a safety zone—the area within a radius of 1330 yards of Ammunition Island, centered on latitude 61°07′28″...

  17. 33 CFR 165.1703 - Ammunition Island, Port Valdez, Alaska.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Ammunition Island, Port Valdez... Ammunition Island, Port Valdez, Alaska. (a) Location. The waters within the following boundaries is a safety zone—the area within a radius of 1330 yards of Ammunition Island, centered on latitude 61°07′28″...

  18. 33 CFR 165.1703 - Ammunition Island, Port Valdez, Alaska.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Ammunition Island, Port Valdez... Ammunition Island, Port Valdez, Alaska. (a) Location. The waters within the following boundaries is a safety zone—the area within a radius of 1330 yards of Ammunition Island, centered on latitude 61°07′28″...

  19. 33 CFR 165.1703 - Ammunition Island, Port Valdez, Alaska.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Ammunition Island, Port Valdez... Ammunition Island, Port Valdez, Alaska. (a) Location. The waters within the following boundaries is a safety zone—the area within a radius of 1330 yards of Ammunition Island, centered on latitude 61°07′28″...

  20. 33 CFR 165.1703 - Ammunition Island, Port Valdez, Alaska.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Ammunition Island, Port Valdez... Ammunition Island, Port Valdez, Alaska. (a) Location. The waters within the following boundaries is a safety zone—the area within a radius of 1330 yards of Ammunition Island, centered on latitude 61°07′28″...

  1. 19 CFR 10.81 - Use in any port.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ....81 Use in any port. (a) Salt withdrawn under bond for use in curing fish on the shores of navigable... Customs Form 7501 which shall show withdrawal of the salt for use in curing fish. Thereupon, and upon the... 19 Customs Duties 1 2010-04-01 2010-04-01 false Use in any port. 10.81 Section 10.81...

  2. 19 CFR 10.81 - Use in any port.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ....81 Use in any port. (a) Salt withdrawn under bond for use in curing fish on the shores of navigable... Customs Form 7501 which shall show withdrawal of the salt for use in curing fish. Thereupon, and upon the... 19 Customs Duties 1 2013-04-01 2013-04-01 false Use in any port. 10.81 Section 10.81...

  3. 7 CFR 319.75-8 - Ports of entry.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 5 2012-01-01 2012-01-01 false Ports of entry. 319.75-8 Section 319.75-8 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOREIGN QUARANTINE NOTICES Khapra Beetle § 319.75-8 Ports of entry. Any...

  4. 7 CFR 319.75-8 - Ports of entry.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 5 2011-01-01 2011-01-01 false Ports of entry. 319.75-8 Section 319.75-8 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOREIGN QUARANTINE NOTICES Khapra Beetle § 319.75-8 Ports of entry. Any...

  5. 7 CFR 319.75-8 - Ports of entry.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 5 2013-01-01 2013-01-01 false Ports of entry. 319.75-8 Section 319.75-8 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOREIGN QUARANTINE NOTICES Khapra Beetle § 319.75-8 Ports of entry. Any...

  6. 7 CFR 319.75-8 - Ports of entry.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Ports of entry. 319.75-8 Section 319.75-8 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOREIGN QUARANTINE NOTICES Khapra Beetle § 319.75-8 Ports of entry. Any...

  7. 7 CFR 319.75-8 - Ports of entry.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 5 2014-01-01 2014-01-01 false Ports of entry. 319.75-8 Section 319.75-8 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOREIGN QUARANTINE NOTICES Khapra Beetle § 319.75-8 Ports of entry. Any...

  8. 27 CFR 26.128 - Taxpayment at port of arrival.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Taxpayment at port of arrival. 26.128 Section 26.128 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Liquors and Articles Purchased by Tourists in Puerto Rico § 26.128 Taxpayment at port of arrival. If...

  9. 77 FR 24656 - Extension of Port Limits of Indianapolis, IN

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-25

    ... enforce the various provisions of customs, immigration, agriculture, and related U.S. laws at the border. The term ``port of entry'' is used in the Code of Federal Regulations (CFR) in title 8 for immigration...\\ \\1\\ Ports of entry for immigration purposes are currently listed at 8 CFR 100.4. Indianapolis...

  10. Hydrogen fuel cells could power ships at port

    ScienceCinema

    Pratt, Joe

    2016-07-12

    Sandia National Laboratories researcher Joe Pratt conducted a study on the use of hydrogen fuel cells to power docked ships at major ports. He found the potential environmental and cost benefits to be substantial. Here, he discusses the study and explains how hydrogen fuel cells can provide efficient, pollution-free energy to ships at port.

  11. 45 CFR 670.34 - Entry and exit ports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ANTARCTIC ANIMALS AND PLANTS Import Into and Export From the United States § 670.34 Entry and exit ports. (a... of Interior in 50 CFR part 14. The ports currently designated are: (1) Los Angeles, California. (2... Orleans, Louisiana. (7) New York, New York. (8) Seattle, Washington. (9) Dallas/Fort Worth, Texas....

  12. Hydrogen fuel cells could power ships at port

    SciTech Connect

    Pratt, Joe

    2013-06-27

    Sandia National Laboratories researcher Joe Pratt conducted a study on the use of hydrogen fuel cells to power docked ships at major ports. He found the potential environmental and cost benefits to be substantial. Here, he discusses the study and explains how hydrogen fuel cells can provide efficient, pollution-free energy to ships at port.

  13. Pyogenic granuloma, port-wine stain and pregnancy.

    PubMed

    Rodins, Karl; Gramp, Dallas; James, Daniel; Kumar, Sandeep

    2011-11-01

    We present a novel case of pyogenic granuloma occurring within a port-wine stain in two sequential pregnancies at different sites. There was no history of precipitating events such as trauma. We discuss why a pyogenic granuloma may occur within a port-wine stain and how pregnancy may increase the likelihood of this occurring.

  14. 45 CFR 670.34 - Entry and exit ports.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... of Interior in 50 CFR part 14. The ports currently designated are: (1) Los Angeles, California. (2) San Francisco, California. (3) Miami, Florida. (4) Honolulu, Hawaii. (5) Chicago, Illinois. (6) New... ANTARCTIC ANIMALS AND PLANTS Import Into and Export From the United States § 670.34 Entry and exit ports....

  15. 45 CFR 670.34 - Entry and exit ports.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... of Interior in 50 CFR part 14. The ports currently designated are: (1) Los Angeles, California. (2) San Francisco, California. (3) Miami, Florida. (4) Honolulu, Hawaii. (5) Chicago, Illinois. (6) New... ANTARCTIC ANIMALS AND PLANTS Import Into and Export From the United States § 670.34 Entry and exit ports....

  16. 19 CFR 4.67 - Closed ports or places.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Closed ports or places. 4.67 Section 4.67 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY VESSELS IN FOREIGN AND DOMESTIC TRADES Foreign Clearances § 4.67 Closed ports or places. No foreign...

  17. 50 CFR 300.188 - Ports of entry.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... International Trade Documentation and Tracking Programs for Highly Migratory Species § 300.188 Ports of entry. NMFS shall monitor the importation of fish or fish products regulated under this subpart into the United States. If NMFS determines that the diversity of handling practices at certain ports at which...

  18. 50 CFR 300.188 - Ports of entry.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... International Trade Documentation and Tracking Programs for Highly Migratory Species § 300.188 Ports of entry. NMFS shall monitor the importation of fish or fish products regulated under this subpart into the United States. If NMFS determines that the diversity of handling practices at certain ports at which...

  19. 50 CFR 300.188 - Ports of entry.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... International Trade Documentation and Tracking Programs for Highly Migratory Species § 300.188 Ports of entry. NMFS shall monitor the importation of fish or fish products regulated under this subpart into the United States. If NMFS determines that the diversity of handling practices at certain ports at which...

  20. 7 CFR 319.37-14 - Ports of entry.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... designated port of entry indicated in 19 CFR 101.3(b)(1). Exceptions may be listed in § 330.104 of this... Stations State Port of entry Federal plant inspection station Arizona Nogales Plant Inspection Station, 9... Angeles Inspection Station, 11840 S. La Cienega Blvd., Hawthorne, CA 90250. San Diego, San Ysidro...

  1. Climate variability and Port wine quality

    NASA Astrophysics Data System (ADS)

    Gouveia, Celia; Liberato, Margarida L. R.; Trigo, Ricardo M.; Dacamara, Carlos

    2010-05-01

    Recent warming trends for Portugal have been found to be steepest in winter and spring and more pronounced for minimum than for maximum values of temperature (Miranda et al, 2002). These trends and associated changes in temperature and precipitation regimes may exert strong influences on agriculture systems. For instance, high values of the North Atlantic Oscillation (NAO) index have been shown to significantly reduce precipitation over Iberia and therefore induce low yield wheat crops in Portugal (Gouveia and Trigo, 2006). Port wine is produced from grapes grown in selected areas of the Douro valley, the so-called Região Demarcada do Douro, the first wine-producing region of the world (dating from 1758). A vintage wine is made from grapes that were grown and harvested in a single specified year and is classified as such because of the above average quality, a status that is attributed by Port houses in their best years. The Douro region presents distinctive climatic, topographic and soil characteristics. While the latest factors are fixed in time, the former may considerably change from year to year, exposing the Port wine productions to a large risk associated to interannual and intra-seasonal climatic variations. It is therefore to be expected that high quality wines are generally associated to optimum climatic conditions. In this work we have performed an analysis of the distinct behaviour of several meteorological fields in vintage versus non-vintage years. The relative importance of maximum and minimum temperature, precipitation and frost days is assessed for each individual month of the vegetative cycle and their importance to a high quality wine year is evaluated. Composites of 500 hPa geopotential height and sea level pressure fields over the Euro Atlantic region are also compared for vintage and non-vintage years. Results reveal a strong dependence of vintage production on maximum temperature and precipitation during spring and summer (the growing season

  2. In vivo photoacoustic imaging of model of port wine stains.

    PubMed

    Yuan, Kaihua; Yuan, Yi; Gu, Ying; Gao, Jianhua; Xing, Da

    2012-01-01

    Port wine stains are categorized as a benign capillary vascular malformation, which is hard to cure. In this paper, a photoacoustic microscopy system, which integrated a two-dimensional scanning galvanometer, an objective lens and a focused ultrasound transducer, was designed for noninvasive imaging of blood vessels of port wine stains model in vivo. Cock comb was chosen as the port wine stains model in the experiment. The blood vessels in x-y plane and x-z plane were imaged clearly. Experimental results demonstrate that photoacoustic microscopy can image the blood vessels of port wine stains model in vivo with high contrast and high resolution. It has the potential for clinical applications in detecting the blood vessels in port wine stains skin.

  3. Single-port approach to benign gynecologic pathology. A review.

    PubMed

    Carbonnel, M; Revaux, A; Frydman, R; Yazigi, A; Ayoubi, J M

    2015-06-01

    Laparoscopy is the gold standard in gynecological surgery. Single-port laparoscopic surgery, has been developed in order to improve minimally invasive surgery. We analyzed single-port approach in benign gynecologic pathology and made a bibliographic research on Pubmed and Medline from January 2000 to January 2015. From what emerges from the papers taken into consideration, single-port laparoscopy can be used for salpingostomy or salpingectomy to treat tubal ectopic pregnancy, benign adnexal disease (ovarian cystectomy, salpingo-oophorectomy), and for hysterectomy. We do not have enough data for complex procedures like myomectomy or hysteropexy. Robotic single-port laparoscopy seems to be a very attractive perspective and its use in benign gynecology surgery is expanding. More and more ergonomic limitations of single-port laparoscopy are corrected by development of articulated or flexible instruments and camera. Beyond these preliminary results, more ample prospective studies with an adapted and standardized instrumentation are thus essential to highlight real profits. PMID:25714874

  4. In vivo photoacoustic imaging of model of port wine stains.

    PubMed

    Yuan, Kaihua; Yuan, Yi; Gu, Ying; Gao, Jianhua; Xing, Da

    2012-01-01

    Port wine stains are categorized as a benign capillary vascular malformation, which is hard to cure. In this paper, a photoacoustic microscopy system, which integrated a two-dimensional scanning galvanometer, an objective lens and a focused ultrasound transducer, was designed for noninvasive imaging of blood vessels of port wine stains model in vivo. Cock comb was chosen as the port wine stains model in the experiment. The blood vessels in x-y plane and x-z plane were imaged clearly. Experimental results demonstrate that photoacoustic microscopy can image the blood vessels of port wine stains model in vivo with high contrast and high resolution. It has the potential for clinical applications in detecting the blood vessels in port wine stains skin. PMID:22635179

  5. The state-of-the-art port of entry workshop

    SciTech Connect

    Godfrey, B.

    1995-05-01

    The increased demand for freight movements through international ports of entry and the signing of the North American Free Trade Agreement (NAFTA) have increased freight traffic at border ports of entry. The State-of-the-Art Port of Entry Workshop initiated a dialogue among technologists and stakeholders to explore the potential uses of technology at border crossings and to set development priorities. International ports of entry are both information and labor intensive, and there are many promising technologies that could be used to provide timely information and optimize inspection resources. Participants universally held that integration of technologies and operations is critical to improving port services. A series of Next Steps was developed to address stakeholder issues and national priorities, such as the National Transportation Policy and National Drug Policy. This report documents the views of the various stakeholders and technologists present at the workshop and outlines future directions of study.

  6. Diameter Controlled of Carbon Nanotubes Synthesized on Nanoporous Silicon Support

    NASA Astrophysics Data System (ADS)

    Asli, N. A.; Shamsudin, M. S.; Maryam, M.; Yusop, S. F. M.; Suriani, A. B.; Rusop, M.; Abdullah, S.

    2013-06-01

    Carbon nanotubes (CNTs) have been successfully synthesized on nanoporous silicon template (NPSiT) using botanical source, camphor oil. Diameter of CNTs synthesized was controlled by pore size of NPSiT prepared by photo-electrochemical anodization method. The diameter of CNTs grown on different NPSiT corresponded to the pore diameter of NPSiT. FESEM images showed self-organized bundles of fiber-like structures of CNTs with diameter of around 20nm which were successfully grown directly on nanoporous silicon while raman spectra obtained ratio of ID/IG at 0.67.

  7. Self port scanning tool : providing a more secure computing Environment through the use of proactive port scanning

    NASA Technical Reports Server (NTRS)

    Kocher, Joshua E; Gilliam, David P.

    2005-01-01

    Secure computing is a necessity in the hostile environment that the internet has become. Protection from nefarious individuals and organizations requires a solution that is more a methodology than a one time fix. One aspect of this methodology is having the knowledge of which network ports a computer has open to the world, These network ports are essentially the doorways from the internet into the computer. An assessment method which uses the nmap software to scan ports has been developed to aid System Administrators (SAs) with analysis of open ports on their system(s). Additionally, baselines for several operating systems have been developed so that SAs can compare their open ports to a baseline for a given operating system. Further, the tool is deployed on a website where SAs and Users can request a port scan of their computer. The results are then emailed to the requestor. This tool aids Users, SAs, and security professionals by providing an overall picture of what services are running, what ports are open, potential trojan programs or backdoors, and what ports can be closed.

  8. 77 FR 47522 - Special Local Regulation; Port Huron Offshore Gran Prix, St. Clair River; Port Huron, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-09

    ... Department of Homeland Security FR Federal Register NPRM Notice of Proposed Rulemaking ] A. Regulatory... SECURITY Coast Guard 33 CFR Part 100 RIN 1625-AA08 Special Local Regulation; Port Huron Offshore Gran Prix, St. Clair River; Port Huron, MI AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY:...

  9. 44 CFR 402.4 - Calls at restricted ports en route to an unrestricted port with restricted cargo.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... port or other place in Communist China.) For example, an American flag ship may call at one of the restricted ports (except one in Communist China), even though it has on board the following classes of... for Communist China (the transportation and discharge of which is covered by Order T-2). None of...

  10. 44 CFR 402.4 - Calls at restricted ports en route to an unrestricted port with restricted cargo.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... port or other place in Communist China.) For example, an American flag ship may call at one of the restricted ports (except one in Communist China), even though it has on board the following classes of... for Communist China (the transportation and discharge of which is covered by Order T-2). None of...

  11. 44 CFR 402.4 - Calls at restricted ports en route to an unrestricted port with restricted cargo.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... port or other place in Communist China.) For example, an American flag ship may call at one of the restricted ports (except one in Communist China), even though it has on board the following classes of... for Communist China (the transportation and discharge of which is covered by Order T-2). None of...

  12. 44 CFR 402.4 - Calls at restricted ports en route to an unrestricted port with restricted cargo.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... port or other place in Communist China.) For example, an American flag ship may call at one of the restricted ports (except one in Communist China), even though it has on board the following classes of... for Communist China (the transportation and discharge of which is covered by Order T-2). None of...

  13. 44 CFR 402.4 - Calls at restricted ports en route to an unrestricted port with restricted cargo.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... port or other place in Communist China.) For example, an American flag ship may call at one of the restricted ports (except one in Communist China), even though it has on board the following classes of... for Communist China (the transportation and discharge of which is covered by Order T-2). None of...

  14. 19 CFR 4.89 - Vessels in foreign trade proceeding via domestic ports and touching at intermediate foreign ports.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Vessels in foreign trade proceeding via domestic ports and touching at intermediate foreign ports. 4.89 Section 4.89 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY VESSELS IN FOREIGN...

  15. Port of Galveston Solar Energy Project

    SciTech Connect

    Falcioni, Diane; Cuclis, Alex; Freundlich, Alex

    2014-03-31

    This study on the performance characteristics of existing solar technologies in a maritime environment was funded by an award given to The Port of Galveston (POG) from the U.S. Department of Energy (DOE). The study includes research performed by The Center for Advanced Materials at the University of Houston (UH). The UH researchers examined how solar cell efficiencies and life spans can be improved by examining the performance of a variety of antireflective (AR) coatings mounted on the top of one of the POG’s Cruise Terminals. Supplemental supporting research was performed at the UH laboratories. An educational Kiosk was constructed with a 55” display screen providing information about solar energy, the research work UH performed at POG and real time data from the solar panels located on the roof of the Cruise Terminal. The Houston Advanced Research Center (HARC) managed the project.

  16. Survey of industrial noise in Port Elizabeth.

    PubMed

    Lane, J L

    1976-02-01

    The amendment to the Factories, Machinery and Building Work Act of 1941 in regard to hearing conservation is outlined. A survey by the Port Elizabeth Deaf Association on workmen from Cadbury (Pty) Ltd was undertaken in 1973 and on a second group in 1974 and the results are published and discussed. Although the numbers of workmen were small, the results suggest that widespread testing will unearth many cases of unsuspected hearing loss. The implications as applied to industry at large are discussed and the difficulties in adequately assessing large numbers of workmen with adequately trained audiometric testers are stressed. A suggestion is made that mobile clinics under the control of Chambers of Industries would be the most efficient way of approaching the screening problem, and an estimated cost structure in the setting up of such a clinic is introduced. PMID:130691

  17. Tsunami response system for ports in Korea

    NASA Astrophysics Data System (ADS)

    Cho, H.-R.; Cho, J.-S.; Cho, Y.-S.

    2015-09-01

    The tsunamis that have occurred in many places around the world over the past decade have taken a heavy toll on human lives and property. The eastern coast of the Korean Peninsula is not safe from tsunamis, particularly the eastern coastal areas, which have long sustained tsunami damage. The eastern coast had been attacked by 1983 and 1993 tsunami events. The aim of this study was to mitigate the casualties and property damage against unexpected tsunami attacks along the eastern coast of the Korean Peninsula by developing a proper tsunami response system for important ports and harbors with high population densities and high concentrations of key national industries. The system is made based on numerical and physical modelings of 3 historical and 11 virtual tsunamis events, field surveys, and extensive interviews with related people.

  18. 9 CFR 97.1 - Overtime work at laboratories, border ports, ocean ports, and airports. 1

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., animal semen, poultry, and hatching eggs see 9 CFR §§ 93.102, 93.203, 93.303, 93.403, 93.503, 93.703, and 93.805 and for designated ports of entry for certain purebred animals see 9 CFR §§ 151.1 through 151..., see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed...

  19. 9 CFR 97.1 - Overtime work at laboratories, border ports, ocean ports, and airports. 1

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., animal semen, poultry, and hatching eggs see 9 CFR §§ 93.102, 93.203, 93.303, 93.403, 93.503, 93.703, and 93.805 and for designated ports of entry for certain purebred animals see 9 CFR §§ 151.1 through 151... employee of the Animal and Plant Health Inspection Service on a Sunday or holiday, or at any other...

  20. Brain Arterial Diameters as a Risk Factor for Vascular Events

    PubMed Central

    Gutierrez, Jose; Cheung, Ken; Bagci, Ahmet; Rundek, Tatjana; Alperin, Noam; Sacco, Ralph L; Wright, Clinton B; Elkind, Mitchell S V

    2015-01-01

    Background Arterial luminal diameters are routinely used to assess for vascular disease. Although small diameters are typically considered pathological, arterial dilatation has also been associated with disease. We hypothesize that extreme arterial diameters are biomarkers of the risk of vascular events. Methods and Results Participants in the Northern Manhattan Study who had a time-of-flight magnetic resonance angiography were included in this analysis (N=1034). A global arterial Z-score, called the brain arterial remodeling (BAR) score, was obtained by averaging the measured diameters within each individual. Individuals with a BAR score <−2 SDs were considered to have the smallest diameters, individuals with a BAR score >−2 and <2 SDs had average diameters, and individuals with a BAR score >2 SDs had the largest diameters. All vascular events were recorded prospectively after the brain magnetic resonance imaging. Spline curves and incidence rates were used to test our hypothesis. The association of the BAR score with death (P=0.001), vascular death (P=0.02), any vascular event (P=0.05), and myocardial infarction (P=0.10) was U-shaped except for ischemic stroke (P=0.74). Consequently, incidence rates for death, vascular death, myocardial infarction, and any vascular event were higher in individuals with the largest diameters, whereas individuals with the smallest diameters had a higher incidence of death, vascular death, any vascular event, and ischemic stroke compared with individuals with average diameters. Conclusions The risk of death, vascular death, and any vascular event increased at both extremes of brain arterial diameters. The pathophysiology linking brain arterial remodeling to systemic vascular events needs further research. PMID:26251284

  1. A data-management system using sensor technology and wireless devices for port security

    NASA Astrophysics Data System (ADS)

    Saldaña, Manuel; Rivera, Javier; Oyola, Jose; Manian, Vidya

    2014-05-01

    Sensor technologies such as infrared sensors and hyperspectral imaging, video camera surveillance are proven to be viable in port security. Drawing from sources such as infrared sensor data, digital camera images and processed hyperspectral images, this article explores the implementation of a real-time data delivery system. In an effort to improve the manner in which anomaly detection data is delivered to interested parties in port security, this system explores how a client-server architecture can provide protected access to data, reports, and device status. Sensor data and hyperspectral image data will be kept in a monitored directory, where the system will link it to existing users in the database. Since this system will render processed hyperspectral images that are dynamically added to the server - which often occupy a large amount of space - the resolution of these images is trimmed down to around 1024×768 pixels. Changes that occur in any image or data modification that originates from any sensor will trigger a message to all users that have a relation with the aforementioned. These messages will be sent to the corresponding users through automatic email generation and through a push notification using Google Cloud Messaging for Android. Moreover, this paper presents the complete architecture for data reception from the sensors, processing, storage and discusses how users of this system such as port security personnel can use benefit from the use of this service to receive secure real-time notifications if their designated sensors have detected anomalies and/or have remote access to results from processed hyperspectral imagery relevant to their assigned posts.

  2. Effects of diesel particle filter retrofits and accelerated fleet turnover on drayage truck emissions at the Port of Oakland.

    PubMed

    Dallmann, Timothy R; Harley, Robert A; Kirchstetter, Thomas W

    2011-12-15

    Heavy-duty diesel drayage trucks have a disproportionate impact on the air quality of communities surrounding major freight-handling facilities. In an attempt to mitigate this impact, the state of California has mandated new emission control requirements for drayage trucks accessing ports and rail yards in the state beginning in 2010. This control rule prompted an accelerated diesel particle filter (DPF) retrofit and truck replacement program at the Port of Oakland. The impact of this program was evaluated by measuring emission factor distributions for diesel trucks operating at the Port of Oakland prior to and following the implementation of the emission control rule. Emission factors for black carbon (BC) and oxides of nitrogen (NO(x)) were quantified in terms of grams of pollutant emitted per kilogram of fuel burned using a carbon balance method. Concentrations of these species along with carbon dioxide were measured in the exhaust plumes of individual diesel trucks as they drove by en route to the Port. A comparison of emissions measured before and after the implementation of the truck retrofit/replacement rule shows a 54 ± 11% reduction in the fleet-average BC emission factor, accompanied by a shift to a more highly skewed emission factor distribution. Although only particulate matter mass reductions were required in the first year of the program, a significant reduction in the fleet-average NO(x) emission factor (41 ± 5%) was observed, most likely due to the replacement of older trucks with new ones. PMID:22039954

  3. Effects of diesel particle filter retrofits and accelerated fleet turnover on drayage truck emissions at the Port of Oakland.

    PubMed

    Dallmann, Timothy R; Harley, Robert A; Kirchstetter, Thomas W

    2011-12-15

    Heavy-duty diesel drayage trucks have a disproportionate impact on the air quality of communities surrounding major freight-handling facilities. In an attempt to mitigate this impact, the state of California has mandated new emission control requirements for drayage trucks accessing ports and rail yards in the state beginning in 2010. This control rule prompted an accelerated diesel particle filter (DPF) retrofit and truck replacement program at the Port of Oakland. The impact of this program was evaluated by measuring emission factor distributions for diesel trucks operating at the Port of Oakland prior to and following the implementation of the emission control rule. Emission factors for black carbon (BC) and oxides of nitrogen (NO(x)) were quantified in terms of grams of pollutant emitted per kilogram of fuel burned using a carbon balance method. Concentrations of these species along with carbon dioxide were measured in the exhaust plumes of individual diesel trucks as they drove by en route to the Port. A comparison of emissions measured before and after the implementation of the truck retrofit/replacement rule shows a 54 ± 11% reduction in the fleet-average BC emission factor, accompanied by a shift to a more highly skewed emission factor distribution. Although only particulate matter mass reductions were required in the first year of the program, a significant reduction in the fleet-average NO(x) emission factor (41 ± 5%) was observed, most likely due to the replacement of older trucks with new ones.

  4. Solar diameter measurements for study of Sun climate coupling

    NASA Technical Reports Server (NTRS)

    Hill, H. A.

    1981-01-01

    Variability in solar shape and diameters was examined as a possible probe of an important climatic driving function, solar luminosity variability. The techniques and facilities developed for measuring the solar diameter were used. The observing program and the requisite data reduction were conducted simultaneously. The development of a technique to calibrate the scale in the telescope field progressed to the design and construction phase.

  5. Method accurately measures mean particle diameters of monodisperse polystyrene latexes

    NASA Technical Reports Server (NTRS)

    Kubitschek, H. E.

    1967-01-01

    Photomicrographic method determines mean particle diameters of monodisperse polystyrene latexes. Many diameters are measured simultaneously by measuring row lengths of particles in a triangular array at a glass-oil interface. The method provides size standards for electronic particle counters and prevents distortions, softening, and flattening.

  6. Superresolution measurement of nanofiber diameter by modes beating

    NASA Astrophysics Data System (ADS)

    Fenton, E. F.; Solano, P.; Hoffman, J. E.; Orozco, L. A.; Rolston, S. L.; Fatemi, F. K.

    2016-05-01

    Nanofibers are becoming an important tool in quantum information technologies for coupling photonics systems to atomic systems. Nondestructive techniques for characterizing these nanofibers prior to integration into an apparatus are desirable. In this work, we probe the light propagating in a fused silica optical nanofiber (750-nm-diameter) by coupling it evanescently to a 6- μm-diameter microfiber that is scanned along the nanofiber length. This technique is capable of observing all possible beat lengths among different propagating modes. The beat lengths are strongly dependent on the nanofiber diameter and refractive index of the fiber. The steep dependence has enabled measurements of the fiber diameter with sub-Angstrom sensitivity. The diameter extracted from the beat length measurements agrees with a measurement made using scanning electron microscopy. Work supported by NSF.

  7. Reliable Diameter Control of Carbon Nanotube Nanobundles Using Withdrawal Velocity

    NASA Astrophysics Data System (ADS)

    Shin, Jung Hwal; Kim, Kanghyun; An, Taechang; Choi, WooSeok; Lim, Geunbae

    2016-09-01

    Carbon nanotube (CNT) nanobundles are widely used in nanoscale imaging, fabrication, and electrochemical and biological sensing. The diameter of CNT nanobundles should be controlled precisely, because it is an important factor in determining electrode performance. Here, we fabricated CNT nanobundles on tungsten tips using dielectrophoresis (DEP) force and controlled their diameters by varying the withdrawal velocity of the tungsten tips. Withdrawal velocity pulling away from the liquid-air interface could be an important, reliable parameter to control the diameter of CNT nanobundles. The withdrawal velocity was controlled automatically and precisely with a one-dimensional motorized stage. The effect of the withdrawal velocity on the diameter of CNT nanobundles was analyzed theoretically and compared with the experimental results. Based on the attachment efficiency, the withdrawal velocity is inversely proportional to the diameter of the CNT nanobundles; this has been demonstrated experimentally. Control of the withdrawal velocity will play an important role in fabricating CNT nanobundles using DEP phenomena.

  8. Reliable Diameter Control of Carbon Nanotube Nanobundles Using Withdrawal Velocity.

    PubMed

    Shin, Jung Hwal; Kim, Kanghyun; An, Taechang; Choi, WooSeok; Lim, Geunbae

    2016-12-01

    Carbon nanotube (CNT) nanobundles are widely used in nanoscale imaging, fabrication, and electrochemical and biological sensing. The diameter of CNT nanobundles should be controlled precisely, because it is an important factor in determining electrode performance. Here, we fabricated CNT nanobundles on tungsten tips using dielectrophoresis (DEP) force and controlled their diameters by varying the withdrawal velocity of the tungsten tips. Withdrawal velocity pulling away from the liquid-air interface could be an important, reliable parameter to control the diameter of CNT nanobundles. The withdrawal velocity was controlled automatically and precisely with a one-dimensional motorized stage. The effect of the withdrawal velocity on the diameter of CNT nanobundles was analyzed theoretically and compared with the experimental results. Based on the attachment efficiency, the withdrawal velocity is inversely proportional to the diameter of the CNT nanobundles; this has been demonstrated experimentally. Control of the withdrawal velocity will play an important role in fabricating CNT nanobundles using DEP phenomena.

  9. Lysosome Transport as a Function of Lysosome Diameter

    PubMed Central

    Bandyopadhyay, Debjyoti; Cyphersmith, Austin; Zapata, Jairo A.; Kim, Y. Joseph; Payne, Christine K.

    2014-01-01

    Lysosomes are membrane-bound organelles responsible for the transport and degradation of intracellular and extracellular cargo. The intracellular motion of lysosomes is both diffusive and active, mediated by motor proteins moving lysosomes along microtubules. We sought to determine how lysosome diameter influences lysosome transport. We used osmotic swelling to double the diameter of lysosomes, creating a population of enlarged lysosomes. This allowed us to directly examine the intracellular transport of the same organelle as a function of diameter. Lysosome transport was measured using live cell fluorescence microscopy and single particle tracking. We find, as expected, the diffusive component of intracellular transport is decreased proportional to the increased lysosome diameter. Active transport of the enlarged lysosomes is not affected by the increased lysosome diameter. PMID:24497985

  10. Reliable Diameter Control of Carbon Nanotube Nanobundles Using Withdrawal Velocity.

    PubMed

    Shin, Jung Hwal; Kim, Kanghyun; An, Taechang; Choi, WooSeok; Lim, Geunbae

    2016-12-01

    Carbon nanotube (CNT) nanobundles are widely used in nanoscale imaging, fabrication, and electrochemical and biological sensing. The diameter of CNT nanobundles should be controlled precisely, because it is an important factor in determining electrode performance. Here, we fabricated CNT nanobundles on tungsten tips using dielectrophoresis (DEP) force and controlled their diameters by varying the withdrawal velocity of the tungsten tips. Withdrawal velocity pulling away from the liquid-air interface could be an important, reliable parameter to control the diameter of CNT nanobundles. The withdrawal velocity was controlled automatically and precisely with a one-dimensional motorized stage. The effect of the withdrawal velocity on the diameter of CNT nanobundles was analyzed theoretically and compared with the experimental results. Based on the attachment efficiency, the withdrawal velocity is inversely proportional to the diameter of the CNT nanobundles; this has been demonstrated experimentally. Control of the withdrawal velocity will play an important role in fabricating CNT nanobundles using DEP phenomena. PMID:27581602

  11. [Research on NEDC ultrafine particle emission characters of a port fuel injection gasoline car].

    PubMed

    Hu, Zhi-Yuan; Li, Jin; Tan, Pi-Qiang; Lou, Di-Ming

    2012-12-01

    A Santana gasoline car with multi-port fuel injection (PFI) system was used as the research prototype and an engine exhaust particle sizer (EEPS) was employed to investigate the exhaust ultrafine particle number and size distribution characters of the tested vehicle in new European driving cycle (NEDC). The tested results showed that the vehicle's nuclear particle number, accumulation particle number, as well as the total particle number emission increased when the car drove in accelerated passage, and the vehicle's particle number emission was high during the first 40 seconds after test started and when the speed was over 90 km x h(-1) in extra urban driving cycle (EUDC) in NEDC. The ultrafine particle distribution of the whole NEDC showed a single peak logarithmic distribution, with diameters of the peak particle number emission ranging from 10 nm to 30 nm, and the geometric mean diameter was 24 nm. The ultrafine particle distribution of the urban driving cycle named by the economic commission for Europe (ECE) e. g. ECE I, ECE II - IV, the extra urban driving cycle e. g. EUDC, and the idling, constant speed, acceleration, deceleration operation conditions of NEDC all showed a single peak logarithmic distribution, also with particle diameters of the peak particle number emission ranging from 10 nm to 30 nm, and the geometric mean diameters of different driving cycle and different driving mode were from 14 nm to 42 nm. Therefore, the ultrafine particle emissions of the tested PFI gasoline car were mainly consisted of nuclear mode particles with a diameter of less than 50 nm. PMID:23379140

  12. [Research on NEDC ultrafine particle emission characters of a port fuel injection gasoline car].

    PubMed

    Hu, Zhi-Yuan; Li, Jin; Tan, Pi-Qiang; Lou, Di-Ming

    2012-12-01

    A Santana gasoline car with multi-port fuel injection (PFI) system was used as the research prototype and an engine exhaust particle sizer (EEPS) was employed to investigate the exhaust ultrafine particle number and size distribution characters of the tested vehicle in new European driving cycle (NEDC). The tested results showed that the vehicle's nuclear particle number, accumulation particle number, as well as the total particle number emission increased when the car drove in accelerated passage, and the vehicle's particle number emission was high during the first 40 seconds after test started and when the speed was over 90 km x h(-1) in extra urban driving cycle (EUDC) in NEDC. The ultrafine particle distribution of the whole NEDC showed a single peak logarithmic distribution, with diameters of the peak particle number emission ranging from 10 nm to 30 nm, and the geometric mean diameter was 24 nm. The ultrafine particle distribution of the urban driving cycle named by the economic commission for Europe (ECE) e. g. ECE I, ECE II - IV, the extra urban driving cycle e. g. EUDC, and the idling, constant speed, acceleration, deceleration operation conditions of NEDC all showed a single peak logarithmic distribution, also with particle diameters of the peak particle number emission ranging from 10 nm to 30 nm, and the geometric mean diameters of different driving cycle and different driving mode were from 14 nm to 42 nm. Therefore, the ultrafine particle emissions of the tested PFI gasoline car were mainly consisted of nuclear mode particles with a diameter of less than 50 nm.

  13. Subcutaneous Venous Port Implantation in Patients with Bilateral Breast Surgery

    SciTech Connect

    Peynircioglu, Bora Arslan, E. Bengi; Cil, Barbaros E.; Geyik, Serdar; Hazirolan, Tuncay; Konan, Ali; Balkanci, Ferhun

    2007-06-15

    The purpose of this study was to evaluate the long-term follow-up results of subcutaneous venous ports implanted in patients with bilateral mastectomies. We retrospectively reviewed the hospital charts and the electronic database of 17 patients with bilateral mastectomies whom had venous port implantation in our interventional radiology suit. A total of 17 ports were implanted to the paramedian (n = 3) and anterolateral (standard; n = 12) chest wall, on the trapezius muscle (n = 1), and to the antecubital fossa (n = 1). The mean age was 48.29 years (range: 35-60 years). The mean time interval from time of surgery to port implantation was 34 months (range: 1-84 months). The mean follow-up time was 15 months (range: 7-39 months). Follow-up parameters and classification of the complications was defined according to the SIR guidelines. No procedure-related complication occurred. A single case of mild late infection was noted and the infection rate was 0.19/1000 catheter days. Infusion chemotherapy administration was still going on in eight patients. Two patients died during the follow-up and four patients were lost after 6 months. Port removal was performed in three patients at follow-up because of the end of treatment. One trapezius port and one paramedian port weres among the removed ports without any problem. Although we have a limited number of patients, port placement to the anterior chest wall, either paramedian or anterolateral, on the trapezius muscle or to the antecubital fossa depending on the extent of the bilateral breast surgeries that can be performed with low complication rates by a careful patient and anatomical location selection by involving the patients in the decision-making process. We believe that patient education and knowledge of possible complications have high importance in follow-up.

  14. Damage to microvessels during pused laser treatment of port-wine stains

    NASA Astrophysics Data System (ADS)

    Svaasand, Lars O.; Fiskerstrand, Elisanne J.; Norvang Nilsen, Lill T.; Stopps, E. K. S.; Nelson, J. Stuart; Berns, Michael W.

    1996-01-01

    Selective photothermolysis with pulsed lasers is presumably the most successful therapy for port wine stain birthmarks (flammeus nevi). Selectivity is obtained by using an optical wavelength corresponding to high absorption in blood together with small absorption in tissue. Further on, the pulse length is selected to be long enough to allow heat to diffuse into the vessel wall, but simultaneously short enough to prevent thermal damage to perivascular tissues. The optimal wavelength and pulse length are therefore dependent on vessel diameter, vessel wall thickness and depth in dermis. The present work, that is based on analytical mathematical modeling, demonstrates that in the case of a 0.45 ms long pulse at 585 nm wavelength vessels of diameter in the range of 40 - 60 micrometers require minimum optical fluence. Smaller vessels require higher fluence because the amount of heat needed to heat the wall then becomes a substantial fraction of the absorbed optical energy, and larger vessels require higher dose because the attenuation of light is blood prevents the blood in central part of the lumen to participate in the heating process. Further on, it is shown that the commonly used dose in the range of 6 - 7 J/cm2 is expected to inflict vessel rupture rather than thermolysis is superficially located vessels. The present analysis might serve to draw guide lines for a protocol where the optical energy, wavelength and pulse length are optimized with respect to vessel diameter and depth.

  15. Modified Visible and Infrared Optical Design for the ITER Upper Ports

    SciTech Connect

    Lasnier, C; Seppala, L; Morris, K

    2008-04-24

    This document reports the results of a follow-on optical design study of visible-light and infrared optics for the ITER upper ports, performed by LLNL under contract for the US ITER Project Office. The major objectives of this work are to move the viewing aperture closer to the plasma so that the optical path does not cut through any adjacent blanket shield module other than the module designated for the port; move optics forward into the port tube to increase the aperture size and therefore improve the spatial resolution; assess the trade-off between spatial resolution and spatial coverage by reducing the field of view; and create a mechanical model with a neutron labyrinth. Here we show an optical design incorporating all these aspects. The new design fits into a 360 mm ID tube, as did the previous design. The entrance aperture is increased from 10 mm to 21 mm, with a corresponding increase in spatial resolution. The Airy disk diameter for 3.8 {micro}m wavelength IR light is 5.1 mm at the most distant target point in the field of view. The field of view is reduced from 60 toroidal degrees (full toroidal coverage with 6 cameras) to 50 toroidal degrees. The 10 degrees eliminated are those nearest the camera, which have the poorest view of the divertor plate and in fact saw little of the plate. The Cassegrain telescope that was outside the vacuum windows in the previous design is now in vacuum, along with lenses for visible light. The Cassegrain for visible light is eliminated. An additional set of optical relay lenses is added for the visible and for the IR.

  16. 33 CFR 6.04-5 - Preventing access of persons, articles or things to vessels, or waterfront facilities.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Preventing access of persons..., AND WATERFRONT FACILITIES General Provisions § 6.04-5 Preventing access of persons, articles or things to vessels, or waterfront facilities. The Captain of the Port may prevent any person, article,...

  17. Multiple access mass storage network

    SciTech Connect

    Wentz, D.L. Jr.

    1980-01-01

    The Multi-Access Storage Subnetwork (MASS) is the latest addition to the Octopus computer network at Lawrence Livermore Laboratory. The subnetwork provides shared mass storage for the Laboratory's multiple-host computer configuration. A Control Data Corp. 38500 Mass Storage facility is interfaces by MASS to the large, scientific worker computers to provide an on-line capacity of 1 trillion bits of user-accessible data. The MASS architecture offers a very high performance approach to the management of large data storage, as well as a high degree of reliability needed for operation in the Laboratory's timesharing environment. MASS combines state-of-the-art digital hardware with an innovative system philosophy. The key LLL design features of the subnetwork that contribute to the high performance include the following: a data transmission scheme that provides a 40-Mbit/s channel over distances of up to 1000 ft, a large metal-oxide-semiconductor (MOS) memory buffer controlled by a 24-port memory multiplexer with an aggregate data rate of 280 Mbit/s, and a set of high-speed microprocessor-based controllers driving the commercial mass storage units. Reliability of the system is provided by a completely redundant network, including two control minicomputer systems. Also enhancing reliability is error detection and correction in the MOS memory. A hardware-generated checksum is carried with each file throughout the entire network to ensure integrity of user files. 6 figures, 1 table.

  18. Coronary artery diameter can be assessed reliably with transthoracic echocardiography.

    PubMed

    Kiviniemi, Tuomas O; Saraste, Markku; Koskenvuo, Juha W; Airaksinen, K E Juhani; Toikka, Jyri O; Saraste, Antti; Pärkkä, Jussi P; Hartiala, Jaakko J

    2004-04-01

    We studied whether diameters of coronary arteries can be measured accurately with the use of transthoracic echocardiography (TTE). By knowing the anatomic diameter of the coronary artery together with coronary flow velocity it is possible to measure coronary flow volume more precisely by TTE. However, the suitability of TTE for measurement of diameters of all main epicardial coronary arteries has not been systematically validated. We measured the diameters of the left main (LM), left anterior descending (LAD), left circumflex (LCX), and right coronary arteries (RCA) with the use of TTE [manual two-dimensional (2D), color-Doppler, and automated 2D analysis] in 30 patients who had normal coronary anatomy. We compared these diameters to those measured with quantitative coronary angiography (QCA). We could measure diameters of LM, LAD, LCX, and RCA by TTE in up to 37%, 63%, 7%, and 60% of patients, respectively. The overall correlation coefficients between TTE and QCA measurements were 0.83 (P < 0.01) with manual 2D analysis, 0.82 (P < 0.01) with automated 2D analysis, and 0.94 (P < 0.01) with a color-Doppler-based analysis. Interobserver variability of TTE measurements was low (coefficient of variation 5.4 +/- 4.6-7.5 +/- 8.8%). TTE is an accurate method to evaluate coronary artery diameter in patients with healthy coronary arteries.

  19. Diesel exhaust exposures in port workers.

    PubMed

    Debia, Maximilien; Neesham-Grenon, Eve; Mudaheranwa, Oliver C; Ragettli, Martina S

    2016-07-01

    Exposure to diesel engine exhaust has been linked to increased cancer risk and cardiopulmonary diseases. Diesel exhaust is a complex mixture of chemical substances, including a particulate fraction mainly composed of ultrafine particles, resulting from the incomplete combustion of fuel. Diesel trucks are known to be an important source of diesel-related air pollution, and areas with heavy truck traffic are associated with higher air pollution levels and increased public health problems. Several indicators have been proposed as surrogates for estimating exposures to diesel exhaust but very few studies have focused specifically on monitoring the ultrafine fraction through the measurement of particle number concentrations. The aim of this study is to assess occupational exposures of gate controllers at the port of Montreal, Canada, to diesel engine emissions from container trucks by measuring several surrogates through a multimetric approach which includes the assessment of both mass and number concentrations and the use of direct reading devices. A 10-day measurement campaign was carried out at two terminal checkpoints at the port of Montreal. Respirable elemental and organic carbon, PM1, PM2.5, PMresp (PM4), PM10, PMtot (inhalable fraction), particle number concentrations, particle size distributions, and gas concentrations (NO2, NO, CO) were monitored. Gate controllers were exposed to concentrations of contaminants associated with diesel engine exhaust (elemental carbon GM = 1.6 µg/m(3); GSD = 1.6) well below recommended occupational exposure limits. Average daily particle number concentrations ranged from 16,544-67,314 particles/cm³ (GM = 32,710 particles/cm³; GSD = 1.6). Significant Pearson correlation coefficients were found between daily elemental carbon, PM fractions and particle number concentrations, as well as between total carbon, PM fractions and particle number concentrations. Significant correlation coefficients were found between particle number

  20. Diesel exhaust exposures in port workers.

    PubMed

    Debia, Maximilien; Neesham-Grenon, Eve; Mudaheranwa, Oliver C; Ragettli, Martina S

    2016-07-01

    Exposure to diesel engine exhaust has been linked to increased cancer risk and cardiopulmonary diseases. Diesel exhaust is a complex mixture of chemical substances, including a particulate fraction mainly composed of ultrafine particles, resulting from the incomplete combustion of fuel. Diesel trucks are known to be an important source of diesel-related air pollution, and areas with heavy truck traffic are associated with higher air pollution levels and increased public health problems. Several indicators have been proposed as surrogates for estimating exposures to diesel exhaust but very few studies have focused specifically on monitoring the ultrafine fraction through the measurement of particle number concentrations. The aim of this study is to assess occupational exposures of gate controllers at the port of Montreal, Canada, to diesel engine emissions from container trucks by measuring several surrogates through a multimetric approach which includes the assessment of both mass and number concentrations and the use of direct reading devices. A 10-day measurement campaign was carried out at two terminal checkpoints at the port of Montreal. Respirable elemental and organic carbon, PM1, PM2.5, PMresp (PM4), PM10, PMtot (inhalable fraction), particle number concentrations, particle size distributions, and gas concentrations (NO2, NO, CO) were monitored. Gate controllers were exposed to concentrations of contaminants associated with diesel engine exhaust (elemental carbon GM = 1.6 µg/m(3); GSD = 1.6) well below recommended occupational exposure limits. Average daily particle number concentrations ranged from 16,544-67,314 particles/cm³ (GM = 32,710 particles/cm³; GSD = 1.6). Significant Pearson correlation coefficients were found between daily elemental carbon, PM fractions and particle number concentrations, as well as between total carbon, PM fractions and particle number concentrations. Significant correlation coefficients were found between particle number