Science.gov

Sample records for accident analysis section

  1. Applying STAMP in Accident Analysis

    NASA Technical Reports Server (NTRS)

    Leveson, Nancy; Daouk, Mirna; Dulac, Nicolas; Marais, Karen

    2003-01-01

    Accident models play a critical role in accident investigation and analysis. Most traditional models are based on an underlying chain of events. These models, however, have serious limitations when used for complex, socio-technical systems. Previously, Leveson proposed a new accident model (STAMP) based on system theory. In STAMP, the basic concept is not an event but a constraint. This paper shows how STAMP can be applied to accident analysis using three different views or models of the accident process and proposes a notation for describing this process.

  2. Aircraft accidents : method of analysis

    NASA Technical Reports Server (NTRS)

    1931-01-01

    The revised report includes the chart for the analysis of aircraft accidents, combining consideration of the immediate causes, underlying causes, and results of accidents, as prepared by the special committee, with a number of the definitions clarified. A brief statement of the organization and work of the special committee and of the Committee on Aircraft Accidents; and statistical tables giving a comparison of the types of accidents and causes of accidents in the military services on the one hand and in civil aviation on the other, together with explanations of some of the important differences noted in these tables.

  3. Accident Tolerant Fuel Analysis

    SciTech Connect

    Smith, Curtis; Chichester, Heather; Johns, Jesse; Teague, Melissa; Tonks, Michael; Youngblood, Robert

    2014-09-01

    Safety is central to the design, licensing, operation, and economics of Nuclear Power Plants (NPPs). Consequently, the ability to better characterize and quantify safety margin holds the key to improved decision making about light water reactor design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margins management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. The purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway research and development (R&D) is to support plant decisions for risk-informed margins management by improving economics and reliability, and sustaining safety, of current NPPs. Goals of the RISMC Pathway are twofold: (1) Develop and demonstrate a risk-assessment method coupled to safety margin quantification that can be used by NPP decision makers as part of their margin recovery strategies. (2) Create an advanced “RISMC toolkit” that enables more accurate representation of NPP safety margin. In order to carry out the R&D needed for the Pathway, the Idaho National Laboratory is performing a series of case studies that will explore methods- and tools-development issues, in addition to being of current interest in their own right. One such study is a comparative analysis of safety margins of plants using different fuel cladding types: specifically, a comparison between current-technology Zircaloy cladding and a notional “accident-tolerant” (e.g., SiC-based) cladding. The present report begins the process of applying capabilities that are still under development to the problem of assessing new fuel designs. The approach and lessons learned from this case study will be included in future Technical Basis Guides produced by the RISMC Pathway. These guides will be the mechanism for developing the specifications for RISMC tools and for defining how plant decision makers should propose and

  4. Aircraft accidents : method of analysis

    NASA Technical Reports Server (NTRS)

    1929-01-01

    This report on a method of analysis of aircraft accidents has been prepared by a special committee on the nomenclature, subdivision, and classification of aircraft accidents organized by the National Advisory Committee for Aeronautics in response to a request dated February 18, 1928, from the Air Coordination Committee consisting of the Assistant Secretaries for Aeronautics in the Departments of War, Navy, and Commerce. The work was undertaken in recognition of the difficulty of drawing correct conclusions from efforts to analyze and compare reports of aircraft accidents prepared by different organizations using different classifications and definitions. The air coordination committee's request was made "in order that practices used may henceforth conform to a standard and be universally comparable." the purpose of the special committee therefore was to prepare a basis for the classification and comparison of aircraft accidents, both civil and military. (author)

  5. Nuclear fuel cycle facility accident analysis handbook

    SciTech Connect

    Ayer, J E; Clark, A T; Loysen, P; Ballinger, M Y; Mishima, J; Owczarski, P C; Gregory, W S; Nichols, B D

    1988-05-01

    The Accident Analysis Handbook (AAH) covers four generic facilities: fuel manufacturing, fuel reprocessing, waste storage/solidification, and spent fuel storage; and six accident types: fire, explosion, tornado, criticality, spill, and equipment failure. These are the accident types considered to make major contributions to the radiological risk from accidents in nuclear fuel cycle facility operations. The AAH will enable the user to calculate source term releases from accident scenarios manually or by computer. A major feature of the AAH is development of accident sample problems to provide input to source term analysis methods and transport computer codes. Sample problems and illustrative examples for different accident types are included in the AAH.

  6. Injury Severity and Mortality of Adult Zebra Crosswalk and Non-Zebra Crosswalk Road Crossing Accidents: A Cross-Sectional Analysis

    PubMed Central

    Pfortmueller, Carmen A.; Marti, Mariana; Kunz, Mirco; Lindner, Gregor; Exadaktylos, Aristomenis K.

    2014-01-01

    Principals Over a million people worldwide die each year from road traffic injuries and more than 10 million sustain permanent disabilities. Many of these victims are pedestrians. The present retrospective study analyzes the severity and mortality of injuries suffered by adult pedestrians, depending on whether they used a zebra crosswalk. Methods Our retrospective data analysis covered adult patients admitted to our emergency department (ED) between 1 January 2000 and 31 December 2012 after being hit by a vehicle while crossing the road as a pedestrian. Patients were identified by using a string term. Medical, police and ambulance records were reviewed for data extraction. Results A total of 347 patients were eligible for study inclusion. Two hundred and three (203; 58.5%) patients were on a zebra crosswalk and 144 (41.5%) were not. The mean ISS (injury Severity Score) was 12.1 (SD 14.7, range 1-75). The vehicles were faster in non-zebra crosswalk accidents (47.7 km/n, versus 41.4 km/h, p<0.027). The mean ISS score was higher in patients with non-zebra crosswalk accidents; 14.4 (SD 16.5, range 1–75) versus 10.5 (SD13.14, range 1–75) (p<0.019). Zebra crosswalk accidents were associated with less risk of severe injury (OR 0.61, 95% CI 0.38–0.98, p<0.042). Accidents involving a truck were associated with increased risk of severe injury (OR 3.53, 95%CI 1.21–10.26, p<0.02). Conclusion Accidents on zebra crosswalks are more common than those not on zebra crosswalks. The injury severity of non-zebra crosswalk accidents is significantly higher than in patients with zebra crosswalk accidents. Accidents involving large vehicles are associated with increased risk of severe injury. Further prospective studies are needed, with detailed assessment of motor vehicle types and speed. PMID:24595100

  7. Practical approaches in accident analysis

    NASA Astrophysics Data System (ADS)

    Stock, M.

    An accident analysis technique based on successive application of structural response, explosion dynamics, gas cloud formation, and plant operation failure mode models is proposed. The method takes into account the nonideal explosion characteristic of a deflagration in the unconfined cloud. The resulting pressure wave differs significantly from a shock wave and the response of structures like lamp posts and walls can differ correspondingly. This gives a more realistic insight into explosion courses than a simple TNT-equivalent approach.

  8. Single pilot IFR accident data analysis

    NASA Technical Reports Server (NTRS)

    Harris, D. F.

    1983-01-01

    The aircraft accident data recorded by the National Transportation and Safety Board (NTSR) for 1964-1979 were analyzed to determine what problems exist in the general aviation (GA) single pilot instrument flight rule (SPIFR) environment. A previous study conducted in 1978 for the years 1964-1975 provided a basis for comparison. This effort was generally limited to SPIFR pilot error landing phase accidents but includes some SPIFR takeoff and enroute accident analysis as well as some dual pilot IFR accident analysis for comparison. Analysis was performed for 554 accidents of which 39% (216) occurred during the years 1976-1979.

  9. An analysis of fishing vessel accidents.

    PubMed

    Wang, J; Pillay, A; Kwon, Y S; Wall, A D; Loughran, C G

    2005-11-01

    In this paper, accident data collected from the Marine Accident Investigation Branch are presented and an analysis is carried out to determine the most common causes of accidents on fishing vessels. Discussions on fishing vessel-safety assessment and data problems are given.

  10. Severe accident analysis using dynamic accident progression event trees

    NASA Astrophysics Data System (ADS)

    Hakobyan, Aram P.

    In present, the development and analysis of Accident Progression Event Trees (APETs) are performed in a manner that is computationally time consuming, difficult to reproduce and also can be phenomenologically inconsistent. One of the principal deficiencies lies in the static nature of conventional APETs. In the conventional event tree techniques, the sequence of events is pre-determined in a fixed order based on the expert judgments. The main objective of this PhD dissertation was to develop a software tool (ADAPT) for automated APET generation using the concept of dynamic event trees. As implied by the name, in dynamic event trees the order and timing of events are determined by the progression of the accident. The tool determines the branching times from a severe accident analysis code based on user specified criteria for branching. It assigns user specified probabilities to every branch, tracks the total branch probability, and truncates branches based on the given pruning/truncation rules to avoid an unmanageable number of scenarios. The function of a dynamic APET developed includes prediction of the conditions, timing, and location of containment failure or bypass leading to the release of radioactive material, and calculation of probabilities of those failures. Thus, scenarios that can potentially lead to early containment failure or bypass, such as through accident induced failure of steam generator tubes, are of particular interest. Also, the work is focused on treatment of uncertainties in severe accident phenomena such as creep rupture of major RCS components, hydrogen burn, containment failure, timing of power recovery, etc. Although the ADAPT methodology (Analysis of Dynamic Accident Progression Trees) could be applied to any severe accident analysis code, in this dissertation the approach is demonstrated by applying it to the MELCOR code [1]. A case study is presented involving station blackout with the loss of auxiliary feedwater system for a

  11. Industrial accidents triggered by flood events: analysis of past accidents.

    PubMed

    Cozzani, Valerio; Campedel, Michela; Renni, Elisabetta; Krausmann, Elisabeth

    2010-03-15

    Industrial accidents triggered by natural events (NaTech accidents) are a significant category of industrial accidents. Several specific elements that characterize NaTech events still need to be investigated. In particular, the damage mode of equipment and the specific final scenarios that may take place in NaTech accidents are key elements for the assessment of hazard and risk due to these events. In the present study, data on 272 NaTech events triggered by floods were retrieved from some of the major industrial accident databases. Data on final scenarios highlighted the presence of specific events, as those due to substances reacting with water, and the importance of scenarios involving consequences for the environment. This is mainly due to the contamination of floodwater with the hazardous substances released. The analysis of process equipment damage modes allowed the identification of the expected release extents due to different water impact types during floods. The results obtained were used to generate substance-specific event trees for the quantitative assessment of the consequences of accidents triggered by floods.

  12. 26 CFR 1.72-15 - Applicability of section 72 to accident or health plans.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 26 Internal Revenue 2 2012-04-01 2012-04-01 false Applicability of section 72 to accident or... Income § 1.72-15 Applicability of section 72 to accident or health plans. (a) Applicability of section... 104 or 105 as accident or health benefits. For example, this section will apply to a pension...

  13. 26 CFR 1.72-15 - Applicability of section 72 to accident or health plans.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 26 Internal Revenue 2 2014-04-01 2014-04-01 false Applicability of section 72 to accident or... Income § 1.72-15 Applicability of section 72 to accident or health plans. (a) Applicability of section... 104 or 105 as accident or health benefits. For example, this section will apply to a pension...

  14. Comparison of perceived and modelled geographical access to accident and emergency departments: a cross-sectional analysis from the Caerphilly Health and Social Needs Study

    PubMed Central

    Fone, David L; Christie, Stephen; Lester, Nathan

    2006-01-01

    Background Assessment of the spatial accessibility of hospital accident and emergency departments as perceived by local residents has not previously been investigated. Perceived accessibility may affect where, when, and whether potential patients attend for treatment. Using data on 11,853 respondents to a population survey in Caerphilly county borough, Wales, UK, we present an analysis comparing the accessibility of accident and emergency departments as reported by local residents and drive-time to the nearest accident and emergency department modelled using a geographical information system (GIS). Results Median drive-times were significantly shorter in the lowest perceived access category and longer in the best perceived access category (p < 0.001). The perceived access and GIS modelled drive-time variables were positively correlated (Spearman's rank correlation coefficient, r = 0.38, p < 0.01). The strongest correlation was found for respondents living in areas in which nearly all households had a car or van (r = 0.47, p < 0.01). Correlations were stronger among respondents reporting good access to public transport and among those reporting a recent accident and emergency attendance for injury treatment compared to other respondents. Correlation coefficients did not vary substantially by levels of household income. Drive-time, road distance and straight-line distance were highly inter-correlated and substituting road distance or straight-line distance as the GIS modelled spatial accessibility measure only marginally decreased the magnitude of the correlations between perceived and GIS modelled access. Conclusion This study provides evidence that the accessibility of hospital-based health care services as perceived by local residents is related to measures of spatial accessibility modelled using GIS. For studies that aim to model geographical separation in a way that correlates well with the perception of local residents, there may be minimal advantage in using

  15. Aircraft Loss-of-Control Accident Analysis

    NASA Technical Reports Server (NTRS)

    Belcastro, Christine M.; Foster, John V.

    2010-01-01

    Loss of control remains one of the largest contributors to fatal aircraft accidents worldwide. Aircraft loss-of-control accidents are complex in that they can result from numerous causal and contributing factors acting alone or (more often) in combination. Hence, there is no single intervention strategy to prevent these accidents. To gain a better understanding into aircraft loss-of-control events and possible intervention strategies, this paper presents a detailed analysis of loss-of-control accident data (predominantly from Part 121), including worst case combinations of causal and contributing factors and their sequencing. Future potential risks are also considered.

  16. Learning from Accident Analysis: The Dynamics Leading Up to a Rafting Accident.

    ERIC Educational Resources Information Center

    Hovelynck, Johan

    1998-01-01

    Analysis of a case study of a whitewater rafting accident reveals that such accidents tend to result from multiple actions. Many events leading up to such accidents include procedural and process factors, suggesting that hard-skills technical training is an insufficient approach to accident prevention. Contains 26 references. (SAS)

  17. MELCOR analysis of the TMI-2 accident

    SciTech Connect

    Boucheron, E.A.

    1990-01-01

    This paper describes the analysis of the Three Mile Island-2 (TMI-2) standard problem that was performed with MELCOR. The MELCOR computer code is being developed by Sandia National Laboratories for the Nuclear Regulatory Commission for the purpose of analyzing severe accident in nuclear power plants. The primary role of MELCOR is to provide realistic predictions of severe accident phenomena and the radiological source team. The analysis of the TMI-2 standard problem allowed for comparison of the model predictions in MELCOR to plant data and to the results of more mechanistic analyses. This exercise was, therefore valuable for verifying and assessing the models in the code. The major trends in the TMI-2 accident are reasonably well predicted with MELCOR, even with its simplified modeling. Comparison of the calculated and measured results is presented and, based on this comparison, conclusions can be drawn concerning the applicability of MELCOR to severe accident analysis. 5 refs., 10 figs., 3 tabs.

  18. An analysis of aircraft accidents involving fires

    NASA Technical Reports Server (NTRS)

    Lucha, G. V.; Robertson, M. A.; Schooley, F. A.

    1975-01-01

    All U. S. Air Carrier accidents between 1963 and 1974 were studied to assess the extent of total personnel and aircraft damage which occurred in accidents and in accidents involving fire. Published accident reports and NTSB investigators' factual backup files were the primary sources of data. Although it was frequently not possible to assess the relative extent of fire-caused damage versus impact damage using the available data, the study established upper and lower bounds for deaths and damage due specifically to fire. In 12 years there were 122 accidents which involved airframe fires. Eighty-seven percent of the fires occurred after impact, and fuel leakage from ruptured tanks or severed lines was the most frequently cited cause. A cost analysis was performed for 300 serious accidents, including 92 serious accidents which involved fire. Personal injury costs were outside the scope of the cost analysis, but data on personnel injury judgements as well as settlements received from the CAB are included for reference.

  19. Bus accident analysis of routes with/without bus priority.

    PubMed

    Goh, Kelvin Chun Keong; Currie, Graham; Sarvi, Majid; Logan, David

    2014-04-01

    This paper summarises findings on road safety performance and bus-involved accidents in Melbourne along roads where bus priority measures had been applied. Results from an empirical analysis of the accident types revealed significant reduction in the proportion of accidents involving buses hitting stationary objects and vehicles, which suggests the effect of bus priority in addressing manoeuvrability issues for buses. A mixed-effects negative binomial (MENB) regression and back-propagation neural network (BPNN) modelling of bus accidents considering wider influences on accident rates at a route section level also revealed significant safety benefits when bus priority is provided. Sensitivity analyses done on the BPNN model showed general agreement in the predicted accident frequency between both models. The slightly better performance recorded by the MENB model results suggests merits in adopting a mixed effects modelling approach for accident count prediction in practice given its capability to account for unobserved location and time-specific factors. A major implication of this research is that bus priority in Melbourne's context acts to improve road safety and should be a major consideration for road management agencies when implementing bus priority and road schemes.

  20. Safety analysis of surface haulage accidents

    SciTech Connect

    Randolph, R.F.; Boldt, C.M.K.

    1996-12-31

    Research on improving haulage truck safety, started by the U.S. Bureau of Mines, is being continued by its successors. This paper reports the orientation of the renewed research efforts, beginning with an update on accident data analysis, the role of multiple causes in these accidents, and the search for practical methods for addressing the most important causes. Fatal haulage accidents most often involve loss of control or collisions caused by a variety of factors. Lost-time injuries most often involve sprains or strains to the back or multiple body areas, which can often be attributed to rough roads and the shocks of loading and unloading. Research to reduce these accidents includes improved warning systems, shock isolation for drivers, encouraging seatbelt usage, and general improvements to system and task design.

  1. Anthropotechnological analysis of industrial accidents in Brazil.

    PubMed Central

    Binder, M. C.; de Almeida, I. M.; Monteau, M.

    1999-01-01

    The Brazilian Ministry of Labour has been attempting to modify the norms used to analyse industrial accidents in the country. For this purpose, in 1994 it tried to make compulsory use of the causal tree approach to accident analysis, an approach developed in France during the 1970s, without having previously determined whether it is suitable for use under the industrial safety conditions that prevail in most Brazilian firms. In addition, opposition from Brazilian employers has blocked the proposed changes to the norms. The present study employed anthropotechnology to analyse experimental application of the causal tree method to work-related accidents in industrial firms in the region of Botucatu, São Paulo. Three work-related accidents were examined in three industrial firms representative of local, national and multinational companies. On the basis of the accidents analysed in this study, the rationale for the use of the causal tree method in Brazil can be summarized for each type of firm as follows: the method is redundant if there is a predominance of the type of risk whose elimination or neutralization requires adoption of conventional industrial safety measures (firm representative of local enterprises); the method is worth while if the company's specific technical risks have already largely been eliminated (firm representative of national enterprises); and the method is particularly appropriate if the firm has a good safety record and the causes of accidents are primarily related to industrial organization and management (multinational enterprise). PMID:10680249

  2. Single pilot IFR accident data analysis

    NASA Technical Reports Server (NTRS)

    Harris, D. F.; Morrisete, J. A.

    1982-01-01

    The aircraft accident data recorded and maintained by the National Transportation Safety Board for 1964 to 1979 were analyzed to determine what problems exist in the general aviation single pilot instrument flight rules environment. A previous study conducted in 1978 for the years 1964 to 1975 provided a basis for comparison. The purpose was to determine what changes, if any, have occurred in trends and cause-effect relationships reported in the earlier study. The increasing numbers have been tied to measures of activity to produce accident rates which in turn were analyzed in terms of change. Where anomalies or unusually high accident rates were encountered, further analysis was conducted to isolate pertinent patterns of cause factors and/or experience levels of involved pilots. The bulk of the effort addresses accidents in the landing phase of operations. A detailed analysis was performed on controlled/uncontrolled collisions and their unique attributes delineated. Estimates of day vs. night general aviation activity and accident rates were obtained.

  3. Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Analysis of core damage frequency from internal events during mid-loop operations. Appendix E (Sections E.9-E.16), Volume 2, Part 3B

    SciTech Connect

    Chu, T.L.; Musicki, Z.; Kohut, P.; Yang, J.; Bozoki, G.; Hsu, C.J.; Diamond, D.J.; Wong, S.M.; Bley, D.; Johnson, D.

    1994-06-01

    Traditionally, probabilistic risk assessments (PRA) of severe accidents in nuclear power plants have considered initiating events potentially occurring only during full power operation. Some previous screening analyses that were performed for other modes of operation suggested that risks during those modes were small relative to full power operation. However, more recent studies and operational experience have implied that accidents during low power and shutdown could be significant contributors to risk. Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The scope of the program includes that of a level-3 PRA. In phase 2, mid-loop operation was selected as the plant configuration to be analyzed based on the results of the phase 1 study. The objective of the phase 2 study is to perform a detailed analysis of the potential accident scenarios that may occur during mid-loop operation, and compare the results with those of NUREG-1150. The scope of the level-1 study includes plant damage state analysis, and uncertainty analysis. Volume 1 summarizes the results of the study. Internal events analysis is documented in Volume 2. It also contains an appendix that documents the part of the phase 1 study that has to do with POSs other than mid-loop operation. Internal fire and internal flood analyses are documented in Volumes 3 and 4. A separate study on seismic analysis, documented in Volume 5, was performed for the NRC by Future Resources Associates, Inc. Volume 6 documents the accident progression, source terms, and consequence analysis.

  4. [Hanggliding accidents. Distribution of injuries and accident analysis].

    PubMed

    Ballmer, F T; Jakob, R P

    1989-12-01

    Paragliding--a relatively new sport to Switzerland--brought 23 patients with 48 injuries (38% lower limb and 29% spinal) within a period of 8 months to the Inselspital University hospital in Berne. The aim of the study in characterizing these injuries is to formulate some guidelines towards prevention. With over 90% of accidents occurring at either take off or landing, emphasis on better training for the beginner is proposed with strict guidelines for the more experienced pilot flying in unfavourable conditions.

  5. Developing techniques for cause-responsibility analysis of occupational accidents.

    PubMed

    Jabbari, Mousa; Ghorbani, Roghayeh

    2016-11-01

    The aim of this study was to specify the causes of occupational accidents, determine social responsibility and the role of groups involved in work-related accidents. This study develops occupational accidents causes tree, occupational accidents responsibility tree, and occupational accidents component-responsibility analysis worksheet; based on these methods, it develops cause-responsibility analysis (CRA) techniques, and for testing them, analyzes 100 fatal/disabling occupational accidents in the construction setting that were randomly selected from all the work-related accidents in Tehran, Iran, over a 5-year period (2010-2014). The main result of this study involves two techniques for CRA: occupational accidents tree analysis (OATA) and occupational accidents components analysis (OACA), used in parallel for determination of responsible groups and responsibilities rate. From the results, we find that the management group of construction projects has 74.65% responsibility of work-related accidents. The developed techniques are purposeful for occupational accidents investigation/analysis, especially for the determination of detailed list of tasks, responsibilities, and their rates. Therefore, it is useful for preventing work-related accidents by focusing on the responsible group's duties.

  6. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    SciTech Connect

    CROWE, R.D.

    1999-09-09

    This document provides the detailed accident analysis to support ''HNF-3553, Spent Nuclear Fuel Project Final Safety, Analysis Report, Annex A,'' ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  7. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    SciTech Connect

    CROWE, R.D.; PIEPHO, M.G.

    2000-03-23

    This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  8. Canister storage building design basis accident analysis documentation

    SciTech Connect

    KOPELIC, S.D.

    1999-02-25

    This document provides the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  9. Traffic accidents on a single-lane road with multi-slowdown sections

    NASA Astrophysics Data System (ADS)

    Li, Xingli; Kuang, Hua; Fan, Yanhong; Zhang, Guoxin

    2014-02-01

    In this paper, an extended cellular automaton model is proposed to simulate the complex characteristics of traffic flow and the probability of the occurrence of traffic accidents by considering the modified conditions for determining whether traffic accidents happen and the effect of multi-slowdown sections on a highway. The simulation results show that the multi-slowdown sections can lead to multiphase coexistences (i.e. free flow phase, congestion phase and saturation phase) in traffic system. The fundamental diagram shows that the number of slowdown section does not influence the mean velocity and the mean flow under the periodic boundary condition, but the existence of slowdown sections can effectively reduce the occurrence of traffic accident. In particular, it is found that the probability of car accidents to occur is the largest at the joint of the normal-speed section and slowdown section, and the underlying mechanism is analyzed. In addition, to design the appropriate limited speed and reduce the differences between the normal speed and limited speed will alleviate traffic congestion and reduce the occurrence of traffic accidents obviously.

  10. Cold Vacuum Drying (CVD) Facility Design Basis Accident Analysis Documentation

    SciTech Connect

    PIEPHO, M.G.

    1999-10-20

    This document provides the detailed accident analysis to support HNF-3553, Annex B, Spent Nuclear Fuel Project Final Safety Analysis Report, ''Cold Vacuum Drying Facility Final Safety Analysis Report (FSAR).'' All assumptions, parameters and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the FSAR.

  11. Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis

    SciTech Connect

    Farmer, Mitchell T.; Bunt, R.; Corradini, M.; Ellison, Paul B.; Francis, M.; Gabor, John D.; Gauntt, R.; Henry, C.; Linthicum, R.; Luangdilok, W.; Lutz, R.; Paik, C.; Plys, M.; Rabiti, Cristian; Rempe, J.; Robb, K.; Wachowiak, R.

    2015-01-31

    The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy’s (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affect reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).

  12. [An analysis of industrial accidents in the working field with a particular emphasis on repeated accidents].

    PubMed

    Wakisaka, I; Yanagihashi, T; Tomari, T; Sato, M

    1990-03-01

    The present study is based on an analysis of routinely submitted reports of occupational accidents experienced by the workers of industrial enterprises under the jurisdiction of Kagoshima Labor Standard Office during a 5-year period 1983 to 1987. Officially notified injuries serious enough to keep employees away from their job for work at least 4 days were utilized in this study. Data was classified so as to give an observed frequency distribution for workers having any specified number of accidents. Also, the accident rate which is an indicator of the risk of accident was compared among different occupations, between age groups and between the sexes. Results obtained are as follows; 1) For the combined total of 6,324 accident cases for 8 types of occupation (Construction, Transportation, Mining & Quarrying, Forestry, Food manufacture, Lumber & Woodcraft, Manufacturing industry and Other business), the number of those who had at least one accident was 6,098, of which 5,837 were injured only once, 208 twice, 21 three times and 2 four times. When occupation type was fixed, however, the number of workers having one, two, three and four times of accidents were 5,895, 182, 19 and 2, respectively. This suggests that some workers are likely to have experienced repeated accidents in more than one type of occupation.(ABSTRACT TRUNCATED AT 250 WORDS)

  13. Accident analysis of heavy water cooled thorium breeder reactor

    SciTech Connect

    Yulianti, Yanti; Su’ud, Zaki; Takaki, Naoyuki

    2015-04-16

    Thorium has lately attracted considerable attention because it is accumulating as a by-product of large scale rare earth mining. The objective of research is to analyze transient behavior of a heavy water cooled thorium breeder that is designed by Tokai University and Tokyo Institute of Technology. That is oxide fueled, PWR type reactor with heavy water as primary coolant. An example of the optimized core has relatively small moderator to fuel volume ratio (MFR) of 0.6 and the characteristics of the core are burn-up of 67 GWd/t, breeding ratio of 1.08, burn-up reactivity loss during cycles of < 0.2% dk/k, and negative coolant reactivity coefficient. One of the nuclear reactor accidents types examined here is Unprotected Transient over Power (UTOP) due to withdrawing of the control rod that result in the positive reactivity insertion so that the reactor power will increase rapidly. Another accident type is Unprotected Loss of Flow (ULOF) that caused by failure of coolant pumps. To analyze the reactor accidents, neutron distribution calculation in the nuclear reactor is the most important factor. The best expression for the neutron distribution is the Boltzmann transport equation. However, solving this equation is very difficult so that the space-time diffusion equation is commonly used. Usually, space-time diffusion equation is solved by employing a point kinetics approach. However, this approach is less accurate for a spatially heterogeneous nuclear reactor and the nuclear reactor with quite large reactivity input. Direct method is therefore used to solve space-time diffusion equation which consider spatial factor in detail during nuclear reactor accident simulation. Set of equations that obtained from full implicit finite-difference method is solved by using iterative methods. The indication of UTOP accident is decreasing macroscopic absorption cross-section that results large external reactivity, and ULOF accident is indicated by decreasing coolant flow. The

  14. Accident progression event tree analysis for postulated severe accidents at N Reactor

    SciTech Connect

    Wyss, G.D.; Camp, A.L.; Miller, L.A.; Dingman, S.E.; Kunsman, D.M. ); Medford, G.T. )

    1990-06-01

    A Level II/III probabilistic risk assessment (PRA) has been performed for N Reactor, a Department of Energy (DOE) production reactor located on the Hanford reservation in Washington. The accident progression analysis documented in this report determines how core damage accidents identified in the Level I PRA progress from fuel damage to confinement response and potential releases the environment. The objectives of the study are to generate accident progression data for the Level II/III PRA source term model and to identify changes that could improve plant response under accident conditions. The scope of the analysis is comprehensive, excluding only sabotage and operator errors of commission. State-of-the-art methodology is employed based largely on the methods developed by Sandia for the US Nuclear Regulatory Commission in support of the NUREG-1150 study. The accident progression model allows complex interactions and dependencies between systems to be explicitly considered. Latin Hypecube sampling was used to assess the phenomenological and systemic uncertainties associated with the primary and confinement system responses to the core damage accident. The results of the analysis show that the N Reactor confinement concept provides significant radiological protection for most of the accident progression pathways studied.

  15. Exploratory analysis of Spanish energetic mining accidents.

    PubMed

    Sanmiquel, Lluís; Freijo, Modesto; Rossell, Josep M

    2012-01-01

    Using data on work accidents and annual mining statistics, the paper studies work-related accidents in the Spanish energetic mining sector in 1999-2008. The following 3 parameters are considered: age, experience and size of the mine (in number of workers) where the accident took place. The main objective of this paper is to show the relationship between different accident indicators: risk index (as an expression of the incidence), average duration index for the age and size of the mine variables (as a measure of the seriousness of an accident), and the gravity index for the various sizes of mines (which measures the seriousness of an accident, too). The conclusions of this study could be useful to develop suitable prevention policies that would contribute towards a decrease in work-related accidents in the Spanish energetic mining industry.

  16. Insomnia and accidents: cross-sectional study (EQUINOX) on sleep-related home, work and car accidents in 5293 subjects with insomnia from 10 countries.

    PubMed

    Léger, Damien; Bayon, Virginie; Ohayon, Maurice M; Philip, Pierre; Ement, Philippe; Metlaine, Arnaud; Chennaoui, Mounir; Faraut, Brice

    2014-04-01

    The link between sleepiness and the risk of motor vehicle accidents is well known, but little is understood regarding the risk of home, work and car accidents of subjects with insomnia. An international cross-sectional survey was conducted across 10 countries in a population of subjects with sleep disturbances. Primary care physicians administered a questionnaire that included assessment of sociodemographic characteristics, sleep disturbance and accidents (motor vehicle, work and home) related to sleep problems to each subject. Insomnia was defined using the International Classification of Sleep Disorders (ICSD-10) criteria. A total of 5293 subjects were included in the study, of whom 20.9% reported having had at least one home accident within the past 12 months, 10.1% at least one work accident, 9% reported having fallen asleep while driving at least once and 4.1% reported having had at least one car accident related to their sleepiness. All types of accident were reported more commonly by subjects living in urban compared to other residential areas. Car accidents were reported more commonly by employed subjects, whereas home injuries were reported more frequently by the unemployed. Car accidents were reported more frequently by males than by females, whereas home accidents were reported more commonly by females. Patients with insomnia have high rates of home accidents, car accidents and work accidents related to sleep disturbances independently of any adverse effects of hypnotic treatments. Reduced total sleep time may be one factor explaining the high risk of accidents in individuals who complain of insomnia.

  17. TMI-2 accident: core heat-up analysis

    SciTech Connect

    Ardron, K.H.; Cain, D.G.

    1981-01-01

    This report summarizes NSAC study of reactor core thermal conditions during the accident at Three Mile Island, Unit 2. The study focuses primarily on the time period from core uncovery (approximately 113 minutes after turbine trip) through the initiation of sustained high pressure injection (after 202 minutes). The transient analysis is based upon established sequences of events; plant data; post-accident measurements; interpretation or indirect use of instrument responses to accident conditions.

  18. Development of Database for Accident Analysis in Indian Mines

    NASA Astrophysics Data System (ADS)

    Tripathy, Debi Prasad; Guru Raghavendra Reddy, K.

    2016-10-01

    Mining is a hazardous industry and high accident rates associated with underground mining is a cause of deep concern. Technological developments notwithstanding, rate of fatal accidents and reportable incidents have not shown corresponding levels of decline. This paper argues that adoption of appropriate safety standards by both mine management and the government may result in appreciable reduction in accident frequency. This can be achieved by using the technology in improving the working conditions, sensitising workers and managers about causes and prevention of accidents. Inputs required for a detailed analysis of an accident include information on location, time, type, cost of accident, victim, nature of injury, personal and environmental factors etc. Such information can be generated from data available in the standard coded accident report form. This paper presents a web based application for accident analysis in Indian mines during 2001-2013. An accident database (SafeStat) prototype based on Intranet of the TCP/IP agreement, as developed by the authors, is also discussed.

  19. NASA's Accident Precursor Analysis Process and the International Space Station

    NASA Technical Reports Server (NTRS)

    Groen, Frank; Lutomski, Michael

    2010-01-01

    This viewgraph presentation reviews the implementation of Accident Precursor Analysis (APA), as well as the evaluation of In-Flight Investigations (IFI) and Problem Reporting and Corrective Action (PRACA) data for the identification of unrecognized accident potentials on the International Space Station.

  20. [Severe parachuting accident. Analysis of 122 cases].

    PubMed

    Krauss, U; Mischkowsky, T

    1993-06-01

    Based on a population of 122 severely injured patients the causes of paragliding accidents and the patterns of injury are analyzed. A questionnaire is used to establish a sport-specific profile for the paragliding pilot. The lower limbs (55.7%) and the lower parts of the spine (45.9%) are the most frequently injured parts of the body. There is a high risk of multiple injuries after a single accident because of the tremendous axial power. The standard of equipment is good in over 90% of the cases. Insufficient training and failure to take account of geographical and meteorological conditions are the main determinants of accidents sustained by paragliders, most of whom are young. Nevertheless, 80% of our patients want to continue paragliding. Finally some advice is given on how to prevent paragliding accidents and injuries.

  1. An analysis of pileup accidents in highway systems

    NASA Astrophysics Data System (ADS)

    Chang, Jau-Yang; Lai, Wun-Cing

    2016-02-01

    Pileup accident is a multi-vehicle collision occurring in the lane and producing by successive following vehicles. It is a special collision on highway. The probability of the occurrence of pileup accident is lower than that of the other accidents in highway systems. However, the pileup accident leads to injuries and damages which are often serious. In this paper, we analyze the occurrence of pileup accidents by considering the three types of dangerous collisions in highway systems. We evaluate those corresponding to rear-end collision, lane-changing collision, and double lane-changing collision. We simulate four road driving strategies to investigate the relationships between different vehicle collisions and pileup accidents. In accordance with the simulation and analysis, it is shown that the double lane-changing collisions result in an increase of the occurrence of pileup accidents. Additionally, we found that the probability of the occurrence of pileup accidents can be reduced when the speeds of vehicles are suitably constrained in highway systems.

  2. An analysis of pilot error-related aircraft accidents

    NASA Technical Reports Server (NTRS)

    Kowalsky, N. B.; Masters, R. L.; Stone, R. B.; Babcock, G. L.; Rypka, E. W.

    1974-01-01

    A multidisciplinary team approach to pilot error-related U.S. air carrier jet aircraft accident investigation records successfully reclaimed hidden human error information not shown in statistical studies. New analytic techniques were developed and applied to the data to discover and identify multiple elements of commonality and shared characteristics within this group of accidents. Three techniques of analysis were used: Critical element analysis, which demonstrated the importance of a subjective qualitative approach to raw accident data and surfaced information heretofore unavailable. Cluster analysis, which was an exploratory research tool that will lead to increased understanding and improved organization of facts, the discovery of new meaning in large data sets, and the generation of explanatory hypotheses. Pattern recognition, by which accidents can be categorized by pattern conformity after critical element identification by cluster analysis.

  3. The covariance between the number of accidents and the number of victims in multivariate analysis of accident related outcomes.

    PubMed

    Bijleveld, F D

    2005-07-01

    In this study some statistical issues involved in the simultaneous analysis of accident related outcomes of the road traffic process are investigated. Since accident related outcomes like the number of victims, fatalities or accidents show interdependencies, their simultaneous analysis requires that these interdependencies are taken into account. One particular interdependency is the number of fatal accidents that is always smaller than the number of fatalities as at least one fatality results from a fatal accident. More generally, when the number of accidents increases, the number of people injured as a result of these accidents will also increase. Since dependencies between accident related outcomes are reflected in the variance-covariance structure of the outcomes, the main focus of the present study is on establishing this structure. As this study shows it is possible to derive relatively simple expressions for estimates of the variances and covariances of (logarithms of) accidents and victim counts. One example reveals a substantial effect of the inclusion of covariance terms in the estimation of a confidence region of a mortality rate. The accuracy of the estimated variance-covariance structure of the accident related outcomes is evaluated using samples of real life accident data from The Netherlands. Additionally, the effect of small expected counts on the variance estimate of the logarithm of the counts is investigated.

  4. Case for integral core-disruptive accident analysis

    SciTech Connect

    Luck, L B; Bell, C R

    1985-01-01

    Integral analysis is an approach used at the Los Alamos National Laboratory to cope with the broad multiplicity of accident paths and complex phenomena that characterize the transition phase of core-disruptive accident progression in a liquid-metal-cooled fast breeder reactor. The approach is based on the combination of a reference calculation, which is intended to represent a band of similar accident paths, and associated system- and separate-effect studies, which are designed to determine the effect of uncertainties. Results are interpreted in the context of a probabilistic framework. The approach was applied successfully in two studies; illustrations from the Clinch River Breeder Reactor licensing assessment are included.

  5. Analysis of Credible Accidents for Argonaut Reactors

    SciTech Connect

    Hawley, S. C.; Kathern, R. L.; Robkin, M. A.

    1981-04-01

    Five areas of potential accidents have been evaluated for the Argonaut-UTR reactors. They are: • insertion of excess reactivity • catastrophic rearrangement of the core • explosive chemical reaction • graphite fire • fuel-handling accident. A nuclear excursion resulting from the rapid insertion of the maximum available excess reactivity would produce only 12 MWs which is insufficient to cause fuel melting even with conservative assumptions. Although precise structural rearrangement of the core would create a potential hazard, it is simply not credible to assume that such an arrangement would result from the forces of an earthquake or other catastrophic event. Even damage to the fuel from falling debris or other objects is unlikely given the normal reactor structure. An explosion from a metal-water reaction could not occur because there is no credible source of sufficient energy to initiate the reaction. A graphite fire could conceivably create some damage to the reactor but not enough to melt any fuel or initiate a metal-water reaction. The only credible accident involving offsite doses was determined to be a fuel-handling accident which, given highly conservative assumptions, would produce a whole-body dose equivalent of 2 rem from noble gas immersion and a lifetime dose equivalent commitment to the thyroid of 43 rem from radioiodines.

  6. Analysis of tritium mission FMEF/FAA fuel handling accidents

    SciTech Connect

    Van Keuren, J.C.

    1997-11-18

    The Fuels Material Examination Facility/Fuel Assembly Area is proposed to be used for fabrication of mixed oxide fuel to support the Fast Flux Test Facility (FFTF) tritium/medical isotope mission. The plutonium isotope mix for the new mission is different than that analyzed in the FMEF safety analysis report. A reanalysis was performed of three representative accidents for the revised plutonium mix to determine the impact on the safety analysis. Current versions computer codes and meterology data files were used for the analysis. The revised accidents were a criticality, an explosion in a glovebox, and a tornado. The analysis concluded that risk guidelines were met with the revised plutonium mix.

  7. Analysis of Loss-of-Coolant Accidents in the NBSR

    SciTech Connect

    Baek J. S.; Cheng L.; Diamond, D.

    2014-05-23

    This report documents calculations of the fuel cladding temperature during loss-of-coolant accidents in the NBSR. The probability of a pipe failure is small and procedures exist to minimize the loss of water and assure emergency cooling water flows into the reactor core during such an event. Analysis in the past has shown that the emergency cooling water would provide adequate cooling if the water filled the flow channels within the fuel elements. The present analysis is to determine if there is adequate cooling if the water drains from the flow channels. Based on photographs of how the emergency water flows into the fuel elements from the distribution pan, it can be assumed that this water does not distribute uniformly across the flow channels but rather results in a liquid film flowing downward on the inside of one of the side plates in each fuel element and only wets the edges of the fuel plates. An analysis of guillotine breaks shows the cladding temperature remains below the blister temperature in fuel plates in the upper section of the fuel element. In the lower section, the fuel plates are also cooled by water outside the element that is present due to the hold-up pan and temperatures are lower than in the upper section. For small breaks, the simulation results show that the fuel elements are always cooled on the outside even in the upper section and the cladding temperature cannot be higher than the blister temperature. The above results are predicated on assumptions that are examined in the study to see their influence on fuel temperature.

  8. Historical analysis of US pipeline accidents triggered by natural hazards

    NASA Astrophysics Data System (ADS)

    Girgin, Serkan; Krausmann, Elisabeth

    2015-04-01

    Natural hazards, such as earthquakes, floods, landslides, or lightning, can initiate accidents in oil and gas pipelines with potentially major consequences on the population or the environment due to toxic releases, fires and explosions. Accidents of this type are also referred to as Natech events. Many major accidents highlight the risk associated with natural-hazard impact on pipelines transporting dangerous substances. For instance, in the USA in 1994, flooding of the San Jacinto River caused the rupture of 8 and the undermining of 29 pipelines by the floodwaters. About 5.5 million litres of petroleum and related products were spilled into the river and ignited. As a results, 547 people were injured and significant environmental damage occurred. Post-incident analysis is a valuable tool for better understanding the causes, dynamics and impacts of pipeline Natech accidents in support of future accident prevention and mitigation. Therefore, data on onshore hazardous-liquid pipeline accidents collected by the US Pipeline and Hazardous Materials Safety Administration (PHMSA) was analysed. For this purpose, a database-driven incident data analysis system was developed to aid the rapid review and categorization of PHMSA incident reports. Using an automated data-mining process followed by a peer review of the incident records and supported by natural hazard databases and external information sources, the pipeline Natechs were identified. As a by-product of the data-collection process, the database now includes over 800,000 incidents from all causes in industrial and transportation activities, which are automatically classified in the same way as the PHMSA record. This presentation describes the data collection and reviewing steps conducted during the study, provides information on the developed database and data analysis tools, and reports the findings of a statistical analysis of the identified hazardous liquid pipeline incidents in terms of accident dynamics and

  9. Final safety analysis report for the Galileo Mission: Volume 2, Book 2: Accident model document: Appendices

    SciTech Connect

    Not Available

    1988-12-15

    This section of the Accident Model Document (AMD) presents the appendices which describe the various analyses that have been conducted for use in the Galileo Final Safety Analysis Report II, Volume II. Included in these appendices are the approaches, techniques, conditions and assumptions used in the development of the analytical models plus the detailed results of the analyses. Also included in these appendices are summaries of the accidents and their associated probabilities and environment models taken from the Shuttle Data Book (NSTS-08116), plus summaries of the several segments of the recent GPHS safety test program. The information presented in these appendices is used in Section 3.0 of the AMD to develop the Failure/Abort Sequence Trees (FASTs) and to determine the fuel releases (source terms) resulting from the potential Space Shuttle/IUS accidents throughout the missions.

  10. Hypersomnolence and accidents in truck drivers: A cross-sectional study.

    PubMed

    de Pinho, Rachel S N; da Silva-Júnior, Francisco P; Bastos, João Paulo C; Maia, Werllen S; de Mello, Marco Túlio; de Bruin, Veralice M S; de Bruin, Pedro Felipe C

    2006-01-01

    Truck drivers are more likely to suffer severe injury and death due to certain truck driving characteristics. Identifying and preventing factors associated with accidents in this population is important to minimize damage and improve road safety. Excessive daytime sleepiness is a major public health problem, leading to impaired cognitive function, reduced alertness, and increased risk of motor vehicle crashes. The aim of this cross-sectional study was to determine the prevalence and predictors of hypersomnolence (defined as an Epworth Sleepiness Scale score greater than 10) among truck drivers. Three hundred male truck drivers were studied. Quality of sleep was assessed by the Pittsburgh Sleep Quality Index, and the association between demographic, clinical, and occupational data with excessive sleepiness was analyzed. The mean daily sleep duration was 5.6+/-1.3 h, and poor quality of sleep was found in 46.3% of the individuals. Hypersomnolence was found in 46% of the drivers and was associated with younger age, snoring, and working >10 h without rest. A positive correlation between hypersomnolence and previous accidents was detected (p=0.005). These results show that sleep deprivation and hypersomnolence are frequent among truck drivers. The treatment of sleep-disordered breathing and the implementation of educational programs, particularly targeting younger drivers and promoting increased awareness of the deleterious effects of sleep loss and work overload, may help to reduce hypersomnolence and accidents among truck drivers.

  11. Analysis of FY79 Army Aircraft Accidents.

    DTIC Science & Technology

    1980-04-01

    materiel failure/ malfunction 1. A accident. taskerrr (E) s Jb prforanc whch evited The acronym for the 3W approach to the Investigation, fro tht rquied y... lulli , It t , 1AZ" l iil~ i ..-... lI :.].,;.’,, - ,- S !5U" i_ ’ , o ’o , "% ", . #.,""" ".’ - "-’.’’’’-. "" " "’ ."- " " " II I S.7 44’ * U 11 Imem <I

  12. Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Analysis of core damage frequency from internal events during mid-loop operations, Appendices E (Sections E.1--E.8). Volume 2, Part 3A

    SciTech Connect

    Chu, T.L.; Musicki, Z.; Kohut, P.

    1994-06-01

    During 1989, the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the potential risks during low power and shutdown operations. The program includes two parallel projects being performed by Brookhaven National Laboratory (BNL) and Sandia National Laboratories (SNL). Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The objective of this report is to document the approach utilized in the Surry plant and discuss the results obtained. A parallel report for the Grand Gulf plant is prepared by SNL. This study shows that the core-damage frequency during mid-loop operation at the Surry plant is comparable to that of power operation. The authors recognize that there is very large uncertainty in the human error probabilities in this study. This study identified that only a few procedures are available for mitigating accidents that may occur during shutdown. Procedures written specifically for shutdown accidents would be useful.

  13. Accident Sequence Evaluation Program: Human reliability analysis procedure

    SciTech Connect

    Swain, A.D.

    1987-02-01

    This document presents a shortened version of the procedure, models, and data for human reliability analysis (HRA) which are presented in the Handbook of Human Reliability Analysis With emphasis on Nuclear Power Plant Applications (NUREG/CR-1278, August 1983). This shortened version was prepared and tried out as part of the Accident Sequence Evaluation Program (ASEP) funded by the US Nuclear Regulatory Commission and managed by Sandia National Laboratories. The intent of this new HRA procedure, called the ''ASEP HRA Procedure,'' is to enable systems analysts, with minimal support from experts in human reliability analysis, to make estimates of human error probabilities and other human performance characteristics which are sufficiently accurate for many probabilistic risk assessments. The ASEP HRA Procedure consists of a Pre-Accident Screening HRA, a Pre-Accident Nominal HRA, a Post-Accident Screening HRA, and a Post-Accident Nominal HRA. The procedure in this document includes changes made after tryout and evaluation of the procedure in four nuclear power plants by four different systems analysts and related personnel, including human reliability specialists. The changes consist of some additional explanatory material (including examples), and more detailed definitions of some of the terms. 42 refs.

  14. MELCOR accident analysis for ARIES-ACT

    SciTech Connect

    Paul W. Humrickhouse; Brad J. Merrill

    2012-08-01

    We model a loss of flow accident (LOFA) in the ARIES-ACT1 tokamak design. ARIES-ACT1 features an advanced SiC blanket with LiPb as coolant and breeder, a helium cooled steel structural ring and tungsten divertors, a thin-walled, helium cooled vacuum vessel, and a room temperature water-cooled shield outside the vacuum vessel. The water heat transfer system is designed to remove heat by natural circulation during a LOFA. The MELCOR model uses time-dependent decay heats for each component determined by 1-D modeling. The MELCOR model shows that, despite periodic boiling of the water coolant, that structures are kept adequately cool by the passive safety system.

  15. Accident analysis of the windowless target system

    SciTech Connect

    Bianchi, F.; Ferri, R.

    2006-07-01

    Transmutation systems are able to reduce the radio-toxicity and amount of High-Level Wastes (HLW), which are the main concerns related to the peaceful use of nuclear energy, and therefore they should make nuclear energy more easily acceptable by population. A transmutation system consists of a sub-critical fast reactor, an accelerator and a Target System, where the spallation reactions needed to sustain the chain reaction take place. Three options were proposed for the Target System within the European project PDS-XADS (Preliminary Design Studies on an Experimental Accelerator Driven System): window, windowless and solid. This paper describes the constraints taken into account in the design of the windowless Target System for the large Lead-Bismuth-Eutectic cooled XADS and deals with the results of the calculations performed to assess the behaviour of the target during some accident sequences related to pump trips. (authors)

  16. Criticality accident dosimetry by chromosomal analysis.

    PubMed

    Voisin, P; Roy, L; Hone, P A; Edwards, A A; Lloyd, D C; Stephan, G; Romm, H; Groer, P G; Brame, R

    2004-01-01

    The technique of measuring the frequency of dicentric chromosomal aberrations in blood lymphocytes was used to estimate doses in a simulated criticality accident. The simulation consisted of three exposures; approximately 5 Gy with a bare source and 1 and 2 Gy with a lead-shielded source. Three laboratories made separate estimates of the doses. These were made by the iterative method of apportioning the observed dicentric frequencies between the gamma and neutron components, taking account of a given gamma/neutron dose ratio, and referring the separated dicentric frequencies to dose-response calibration curves. An alternative method, based on Bayesian ideas, was employed. This was developed for interpreting dicentric frequencies in situations where the gamma/neutron ratio is uncertain. Both methods gave very similar results. One laboratory produced dose estimates close to the eventual exercise reference doses and the other laboratories estimated slightly higher values. The main reason for the higher values was the calibration relationships for fission neutrons.

  17. Analysis of the temporal properties in car accident time series

    NASA Astrophysics Data System (ADS)

    Telesca, Luciano; Lovallo, Michele

    2008-05-01

    In this paper we study the time-clustering behavior of sequences of car accidents, using data from a freely available database in the internet. The Allan Factor analysis, which is a well-suited method to investigate time-dynamical behaviors in point processes, has revealed that the car accident sequences are characterized by a general time-scaling behavior, with the presence of cyclic components. These results indicate that the time dynamics of the events are not Poissonian but long range correlated with periodicities ranging from 12 h to 1 year.

  18. Computation of cross sections and dose conversion factors for criticality accident dosimetry.

    PubMed

    Devine, R T

    2004-01-01

    In the application of criticality accident dosemeters the cross sections and fluence-to-dose conversion factors have to be computed. The cross section and fluence-to-dose conversion factor for the thermal and epi-thermal contributions to neutron dose are well documented; for higher energy regions (>100 keV) these depend on the spectrum assumed. Fluence is determined using threshold detectors. The cross sections require the folding of an expected spectrum with the reaction cross sections. The fluence-to-dose conversion factors also require a similar computation. The true and effective thresholds are used to include the information on the expected spectrum. The spectra can either be taken from compendia or measured at the facility at which the exposures are to be expected. The cross sections can be taken from data computations or analytic representations and the fluence-to-dose conversion factors are determined by various standards making bodies. The problem remaining is the method of computation. The purpose of this paper is to compare two methods for computing these factors: analytic and Monte Carlo.

  19. Upgrading the safety toolkit: Initiatives of the accident analysis subgroup

    SciTech Connect

    O'Kula, K.R.; Chung, D.Y.

    1999-07-01

    Since its inception, the Accident Analysis Subgroup (AAS) of the Energy Facility Contractors Group (EFCOG) has been a leading organization promoting development and application of appropriate methodologies for safety analysis of US Department of Energy (DOE) installations. The AAS, one of seven chartered by the EFCOG Safety Analysis Working Group, has performed an oversight function and provided direction to several technical groups. These efforts have been instrumental toward formal evaluation of computer models, improving the pedigree on high-use computer models, and development of the user-friendly Accident Analysis Guidebook (AAG). All of these improvements have improved the analytical toolkit for best complying with DOE orders and standards shaping safety analysis reports (SARs) and related documentation. Major support for these objectives has been through DOE/DP-45.

  20. Analysis of Crew Fatigue in AIA Guantanamo Bay Aviation Accident

    NASA Technical Reports Server (NTRS)

    Rosekind, Mark R.; Gregory, Kevin B.; Miller, Donna L.; Co, Elizabeth L.; Lebacqz, J. Victor; Statler, Irving C. (Technical Monitor)

    1994-01-01

    Flight operations can engender fatigue, which can affect flight crew performance, vigilance, and mood. The National Transportation Safety Board (NTSB) requested the NASA Fatigue Countermeasures Program to analyze crew fatigue factors in an aviation accident that occurred at Guantanamo Bay, Cuba. There are specific fatigue factors that can be considered in such investigations: cumulative sleep loss, continuous hours of wakefulness prior to the incident or accident, and the time of day at which the accident occurred. Data from the NTSB Human Performance Investigator's Factual Report, the Operations Group Chairman's Factual Report, and the Flight 808 Crew Statements were analyzed, using conservative estimates and averages to reconcile discrepancies among the sources. Analysis of these data determined the following: the entire crew displayed cumulative sleep loss, operated during an extended period of continuous wakefulness, and obtained sleep at times in opposition to the circadian disposition for sleep, and that the accident occurred in the afternoon window of physiological sleepiness. In addition to these findings, evidence that fatigue affected performance was suggested by the cockpit voice recorder (CVR) transcript as well as in the captain's testimony. Examples from the CVR showed degraded decision-making skills, fixation, and slowed responses, all of which can be affected by fatigue; also, the captain testified to feeling "lethargic and indifferent" just prior to the accident. Therefore, the sleep/wake history data supports the hypothesis that fatigue was a factor that affected crewmembers' performance. Furthermore, the examples from the CVR and the captain's testimony support the hypothesis that the fatigue had an impact on specific actions involved in the occurrence of the accident.

  1. INDUSTRIAL/MILITARY ACTIVITY-INITIATED ACCIDENT SCREENING ANALYSIS

    SciTech Connect

    D.A. Kalinich

    1999-09-27

    Impacts due to nearby installations and operations were determined in the Preliminary MGDS Hazards Analysis (CRWMS M&O 1996) to be potentially applicable to the proposed repository at Yucca Mountain. This determination was conservatively based on limited knowledge of the potential activities ongoing on or off the Nevada Test Site (NTS). It is intended that the Industrial/Military Activity-Initiated Accident Screening Analysis provided herein will meet the requirements of the ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987) in establishing whether this external event can be screened from further consideration or must be included as a design basis event (DBE) in the development of accident scenarios for the Monitored Geologic Repository (MGR). This analysis only considers issues related to preclosure radiological safety. Issues important to waste isolation as related to impact from nearby installations will be covered in the MGR performance assessment.

  2. Cold Vacuum Drying facility design basis accident analysis documentation

    SciTech Connect

    CROWE, R.D.

    2000-08-08

    This document provides the detailed accident analysis to support HNF-3553, Annex B, Spent Nuclear Fuel Project Final Safety Analysis Report (FSAR), ''Cold Vacuum Drying Facility Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the FSAR. The calculations in this document address the design basis accidents (DBAs) selected for analysis in HNF-3553, ''Spent Nuclear Fuel Project Final Safety Analysis Report'', Annex B, ''Cold Vacuum Drying Facility Final Safety Analysis Report.'' The objective is to determine the quantity of radioactive particulate available for release at any point during processing at the Cold Vacuum Drying Facility (CVDF) and to use that quantity to determine the amount of radioactive material released during the DBAs. The radioactive material released is used to determine dose consequences to receptors at four locations, and the dose consequences are compared with the appropriate evaluation guidelines and release limits to ascertain the need for preventive and mitigative controls.

  3. An association between dietary habits and traffic accidents in patients with chronic liver disease: A data-mining analysis

    PubMed Central

    KAWAGUCHI, TAKUMI; SUETSUGU, TAKURO; OGATA, SHYOU; IMANAGA, MINAMI; ISHII, KUMIKO; ESAKI, NAO; SUGIMOTO, MASAKO; OTSUYAMA, JYURI; NAGAMATSU, AYU; TANIGUCHI, EITARO; ITOU, MINORU; ORIISHI, TETSUHARU; IWASAKI, SHOKO; MIURA, HIROKO; TORIMURA, TAKUJI

    2016-01-01

    The incidence of traffic accidents in patients with chronic liver disease (CLD) is high in the USA. However, the characteristics of patients, including dietary habits, differ between Japan and the USA. The present study investigated the incidence of traffic accidents in CLD patients and the clinical profiles associated with traffic accidents in Japan using a data-mining analysis. A cross-sectional study was performed and 256 subjects [148 CLD patients (CLD group) and 106 patients with other digestive diseases (disease control group)] were enrolled; 2 patients were excluded. The incidence of traffic accidents was compared between the two groups. Independent factors for traffic accidents were analyzed using logistic regression and decision-tree analyses. The incidence of traffic accidents did not differ between the CLD and disease control groups (8.8 vs. 11.3%). The results of the logistic regression analysis showed that yoghurt consumption was the only independent risk factor for traffic accidents (odds ratio, 0.37; 95% confidence interval, 0.16–0.85; P=0.0197). Similarly, the results of the decision-tree analysis showed that yoghurt consumption was the initial divergence variable. In patients who consumed yoghurt habitually, the incidence of traffic accidents was 6.6%, while that in patients who did not consume yoghurt was 16.0%. CLD was not identified as an independent factor in the logistic regression and decision-tree analyses. In conclusion, the difference in the incidence of traffic accidents in Japan between the CLD and disease control groups was insignificant. Furthermore, yoghurt consumption was an independent negative risk factor for traffic accidents in patients with digestive diseases, including CLD. PMID:27123257

  4. An association between dietary habits and traffic accidents in patients with chronic liver disease: A data-mining analysis.

    PubMed

    Kawaguchi, Takumi; Suetsugu, Takuro; Ogata, Shyou; Imanaga, Minami; Ishii, Kumiko; Esaki, Nao; Sugimoto, Masako; Otsuyama, Jyuri; Nagamatsu, Ayu; Taniguchi, Eitaro; Itou, Minoru; Oriishi, Tetsuharu; Iwasaki, Shoko; Miura, Hiroko; Torimura, Takuji

    2016-05-01

    The incidence of traffic accidents in patients with chronic liver disease (CLD) is high in the USA. However, the characteristics of patients, including dietary habits, differ between Japan and the USA. The present study investigated the incidence of traffic accidents in CLD patients and the clinical profiles associated with traffic accidents in Japan using a data-mining analysis. A cross-sectional study was performed and 256 subjects [148 CLD patients (CLD group) and 106 patients with other digestive diseases (disease control group)] were enrolled; 2 patients were excluded. The incidence of traffic accidents was compared between the two groups. Independent factors for traffic accidents were analyzed using logistic regression and decision-tree analyses. The incidence of traffic accidents did not differ between the CLD and disease control groups (8.8 vs. 11.3%). The results of the logistic regression analysis showed that yoghurt consumption was the only independent risk factor for traffic accidents (odds ratio, 0.37; 95% confidence interval, 0.16-0.85; P=0.0197). Similarly, the results of the decision-tree analysis showed that yoghurt consumption was the initial divergence variable. In patients who consumed yoghurt habitually, the incidence of traffic accidents was 6.6%, while that in patients who did not consume yoghurt was 16.0%. CLD was not identified as an independent factor in the logistic regression and decision-tree analyses. In conclusion, the difference in the incidence of traffic accidents in Japan between the CLD and disease control groups was insignificant. Furthermore, yoghurt consumption was an independent negative risk factor for traffic accidents in patients with digestive diseases, including CLD.

  5. Sensitivity analysis of an accident prediction model by the fractional factorial method.

    PubMed

    Akgüngör, Ali P; Yildiz, Osman

    2007-01-01

    Sensitivity analysis of a model can help us determine relative effects of model parameters on model results. In this study, the sensitivity of the accident prediction model proposed by Zegeer et al. [Zegeer, C.V., Reinfurt, D., Hummer, J., Herf, L., Hunter, W., 1987. Safety Effect of Cross-section Design for Two-lane Roads, vols. 1-2. Report FHWA-RD-87/008 and 009 Federal Highway Administration, Department of Transportation, USA] to its parameters was investigated by the fractional factorial analysis method. The reason for selecting this particular model is that it incorporates both traffic and road geometry parameters besides terrain characteristics. The evaluation of sensitivity analysis indicated that average daily traffic (ADT), lane width (W), width of paved shoulder (PA), median (H) and their interactions (i.e., ADT-W, ADT-PA and ADT-H) have significant effects on number of accidents. Based on the absolute value of parameter effects at the three- and two-standard deviation thresholds ADT was found to be of primary importance, while the remaining identified parameters seemed to be of secondary importance. This agrees with the fact that ADT is among the most effective parameters to determine road geometry and therefore, it is directly related to number of accidents. Overall, the fractional factorial method was found to be an efficient tool to examine the relative importance of the selected accident prediction model parameters.

  6. Road Traffic Accident Analysis of Ajmer City Using Remote Sensing and GIS Technology

    NASA Astrophysics Data System (ADS)

    Bhalla, P.; Tripathi, S.; Palria, S.

    2014-12-01

    With advancement in technology, new and sophisticated models of vehicle are available and their numbers are increasing day by day. A traffic accident has multi-facet characteristics associated with it. In India 93% of crashes occur due to Human induced factor (wholly or partly). For proper traffic accident analysis use of GIS technology has become an inevitable tool. The traditional accident database is a summary spreadsheet format using codes and mileposts to denote location, type and severity of accidents. Geo-referenced accident database is location-referenced. It incorporates a GIS graphical interface with the accident information to allow for query searches on various accident attributes. Ajmer city, headquarter of Ajmer district, Rajasthan has been selected as the study area. According to Police records, 1531 accidents occur during 2009-2013. Maximum accident occurs in 2009 and the maximum death in 2013. Cars, jeeps, auto, pickup and tempo are mostly responsible for accidents and that the occurrence of accidents is mostly concentrated between 4PM to 10PM. GIS has proved to be a good tool for analyzing multifaceted nature of accidents. While road safety is a critical issue, yet it is handled in an adhoc manner. This Study is a demonstration of application of GIS for developing an efficient database on road accidents taking Ajmer City as a study. If such type of database is developed for other cities, a proper analysis of accidents can be undertaken and suitable management strategies for traffic regulation can be successfully proposed.

  7. Civil helicopter wire strike assessment study. Volume 2: Accident analysis briefs

    NASA Technical Reports Server (NTRS)

    Tuomela, C. H.; Brennan, M. F.

    1980-01-01

    A description and analysis of each of the 208 civil helicopter wire strike accidents reported to the National Transportation Safety Board (NTSB) for the ten year period 1970-1979 is given. The accident analysis briefs were based on pilot reports, FAA investigation reports, and such accident photographs as were made available. Briefs were grouped by year and, within year, by NTSB accident report number.

  8. NASA Accident Precursor Analysis Handbook, Version 1.0

    NASA Technical Reports Server (NTRS)

    Groen, Frank; Everett, Chris; Hall, Anthony; Insley, Scott

    2011-01-01

    Catastrophic accidents are usually preceded by precursory events that, although observable, are not recognized as harbingers of a tragedy until after the fact. In the nuclear industry, the Three Mile Island accident was preceded by at least two events portending the potential for severe consequences from an underappreciated causal mechanism. Anomalies whose failure mechanisms were integral to the losses of Space Transportation Systems (STS) Challenger and Columbia had been occurring within the STS fleet prior to those accidents. Both the Rogers Commission Report and the Columbia Accident Investigation Board report found that processes in place at the time did not respond to the prior anomalies in a way that shed light on their true risk implications. This includes the concern that, in the words of the NASA Aerospace Safety Advisory Panel (ASAP), "no process addresses the need to update a hazard analysis when anomalies occur" At a broader level, the ASAP noted in 2007 that NASA "could better gauge the likelihood of losses by developing leading indicators, rather than continue to depend on lagging indicators". These observations suggest a need to revalidate prior assumptions and conclusions of existing safety (and reliability) analyses, as well as to consider the potential for previously unrecognized accident scenarios, when unexpected or otherwise undesired behaviors of the system are observed. This need is also discussed in NASA's system safety handbook, which advocates a view of safety assurance as driving a program to take steps that are necessary to establish and maintain a valid and credible argument for the safety of its missions. It is the premise of this handbook that making cases for safety more experience-based allows NASA to be better informed about the safety performance of its systems, and will ultimately help it to manage safety in a more effective manner. The APA process described in this handbook provides a systematic means of analyzing candidate

  9. Accident patterns for construction-related workers: a cluster analysis

    NASA Astrophysics Data System (ADS)

    Liao, Chia-Wen; Tyan, Yaw-Yauan

    2011-12-01

    The construction industry has been identified as one of the most hazardous industries. The risk of constructionrelated workers is far greater than that in a manufacturing based industry. However, some steps can be taken to reduce worker risk through effective injury prevention strategies. In this article, k-means clustering methodology is employed in specifying the factors related to different worker types and in identifying the patterns of industrial occupational accidents. Accident reports during the period 1998 to 2008 are extracted from case reports of the Northern Region Inspection Office of the Council of Labor Affairs of Taiwan. The results show that the cluster analysis can indicate some patterns of occupational injuries in the construction industry. Inspection plans should be proposed according to the type of construction-related workers. The findings provide a direction for more effective inspection strategies and injury prevention programs.

  10. Accident patterns for construction-related workers: a cluster analysis

    NASA Astrophysics Data System (ADS)

    Liao, Chia-Wen; Tyan, Yaw-Yauan

    2012-01-01

    The construction industry has been identified as one of the most hazardous industries. The risk of constructionrelated workers is far greater than that in a manufacturing based industry. However, some steps can be taken to reduce worker risk through effective injury prevention strategies. In this article, k-means clustering methodology is employed in specifying the factors related to different worker types and in identifying the patterns of industrial occupational accidents. Accident reports during the period 1998 to 2008 are extracted from case reports of the Northern Region Inspection Office of the Council of Labor Affairs of Taiwan. The results show that the cluster analysis can indicate some patterns of occupational injuries in the construction industry. Inspection plans should be proposed according to the type of construction-related workers. The findings provide a direction for more effective inspection strategies and injury prevention programs.

  11. Comprehensive Analysis of Two Downburst-Related Aircraft Accidents

    NASA Technical Reports Server (NTRS)

    Shen, J.; Parks, E. K.; Bach, R. E.

    1996-01-01

    Although downbursts have been identified as the major cause of a number of aircraft takeoff and landing accidents, only the 1985 Dallas/Fort Worth (DFW) and the more recent (July 1994) Charlotte, North Carolina, landing accidents provided sufficient onboard recorded data to perform a comprehensive analysis of the downburst phenomenon. The first step in the present analysis was the determination of the downburst wind components. Once the wind components and their gradients were determined, the degrading effect of the wind environment on the airplane's performance was calculated. This wind-shear-induced aircraft performance degradation, sometimes called the F-factor, was broken down into two components F(sub 1) and F(sub 2), representing the effect of the horizontal wind gradient and the vertical wind velocity, respectively. In both the DFW and Charlotte cases, F(sub 1) was found to be the dominant causal factor of the accident. Next, the aircraft in the two cases were mathematically modeled using the longitudinal equations of motion and the appropriate aerodynamic parameters. Based on the aircraft model and the determined winds, the aircraft response to the recorded pilot inputs showed good agreement with the onboard recordings. Finally, various landing abort strategies were studied. It was concluded that the most acceptable landing abort strategy from both an analytical and pilot's standpoint was to hold constant nose-up pitch attitude while operating at maximum engine thrust.

  12. Enhanced Accident Tolerant Fuels for LWRS - A Preliminary Systems Analysis

    SciTech Connect

    Gilles Youinou; R. Sonat Sen

    2013-09-01

    The severe accident at Fukushima Daiichi nuclear plants illustrates the need for continuous improvements through developing and implementing technologies that contribute to safe, reliable and cost-effective operation of the nuclear fleet. Development of enhanced accident tolerant fuel contributes to this effort. These fuels, in comparison with the standard zircaloy – UO2 system currently used by the LWR industry, should be designed such that they tolerate loss of active cooling in the core for a longer time period (depending on the LWR system and accident scenario) while maintaining or improving the fuel performance during normal operations, operational transients, and design-basis events. This report presents a preliminary systems analysis related to most of these concepts. The potential impacts of these innovative LWR fuels on the front-end of the fuel cycle, on the reactor operation and on the back-end of the fuel cycle are succinctly described without having the pretension of being exhaustive. Since the design of these various concepts is still a work in progress, this analysis can only be preliminary and could be updated as the designs converge on their respective final version.

  13. Analysis of Three Mile Island-Unit 2 accident

    SciTech Connect

    Not Available

    1980-03-01

    The Nuclear Safety Analysis Center (NSAC) of the Electric Power Research Institute has analyzed the Three Mile Island-2 accident. Early results of this analysis were a brief narrative summary, issued in mid-May 1979 and an initial version of this report issued later in 1979 as noted in the Foreword. The present report is a revised version of the 1979 report, containing summaries, a highly detailed sequence of events, a comparison of that sequence of events with those from other sources, 25 appendices, references and a list of abbreviations and acronyms. A matrix of equipment and system actions is included as a folded insert.

  14. A review of risk analysis and helicopter air ambulance accidents.

    PubMed

    Nix, Sam; Buckner, Steven; Cercone, Richard

    2014-01-01

    The Federal Aviation Administration announced a final rule in February 2014 that includes a requirement for helicopter air ambulance operators to institute preflight risk analysis programs. This qualitative study examined risk factors that were described in 22 preliminary, factual, and probable cause helicopter air ambulance accident and incident reports that were initiated by the National Transportation Safety Board between January 1, 2011, and December 31, 2013. Insights into the effectiveness of existing preflight risk analysis strategies were gained by comparing these risk factors with the preflight risk analysis guidance that is published by the Federal Aviation Administration in the Flight Standards Information Management System. When appropriate, a deeper understanding of the human factors that may have contributed to occurrences was gained through methodologies that are described in the Human Factors Analysis and Classification System. The results of this study suggest that there are some vulnerabilities in existing preflight risk analysis guidelines that may affect safety in the helicopter air ambulance industry. The likelihood that human factors contributed to most of the helicopter air ambulance accidents and incidents that occurred during the study period was also evidenced. The results of this study suggest that effective risk analysis programs should provide pilots with both preflight and in-flight resources.

  15. Traffic accident analysis using GIS: a case study of Kyrenia City

    NASA Astrophysics Data System (ADS)

    Kara, Can; Akçit, Nuhcan

    2015-06-01

    Traffic accidents are causing major deaths in urban environments, so analyzing locations of the traffic accidents and their reasons is crucial. In this manner, patterns of accidents and hotspot distribution are analyzed by using geographic information technology. Locations of the traffic accidents in the years 2011, 2012 and 2013 are combined to generate the kernel distribution map of Kyrenia City. This analysis aims to find high dense intersections and segments within the city. Additionally, spatial autocorrelation methods Local Morans I and Getis-Ord Gi are employed . The results are discussed in detail for further analysis. Finally, required changes for numerous intersections are suggested to decrease potential risks of high dense accident locations.

  16. Predicting System Accidents with Model Analysis During Hybrid Simulation

    NASA Technical Reports Server (NTRS)

    Malin, Jane T.; Fleming, Land D.; Throop, David R.

    2002-01-01

    Standard discrete event simulation is commonly used to identify system bottlenecks and starving and blocking conditions in resources and services. The CONFIG hybrid discrete/continuous simulation tool can simulate such conditions in combination with inputs external to the simulation. This provides a means for evaluating the vulnerability to system accidents of a system's design, operating procedures, and control software. System accidents are brought about by complex unexpected interactions among multiple system failures , faulty or misleading sensor data, and inappropriate responses of human operators or software. The flows of resource and product materials play a central role in the hazardous situations that may arise in fluid transport and processing systems. We describe the capabilities of CONFIG for simulation-time linear circuit analysis of fluid flows in the context of model-based hazard analysis. We focus on how CONFIG simulates the static stresses in systems of flow. Unlike other flow-related properties, static stresses (or static potentials) cannot be represented by a set of state equations. The distribution of static stresses is dependent on the specific history of operations performed on a system. We discuss the use of this type of information in hazard analysis of system designs.

  17. Extension of ship accident analysis to multiple-package shipments

    SciTech Connect

    Mills, G.S.; Neuhauser, K.S.

    1997-11-01

    Severe ship accidents and the probability of radioactive material release from spent reactor fuel casks were investigated previously. Other forms of RAM, e.g., plutonium oxide powder, may be shipped in large numbers of packagings rather than in one to a few casks. These smaller, more numerous packagings are typically placed in ISO containers for ease of handling, and several ISO containers may be placed in one of several holds of a cargo ship. In such cases, the size of a radioactive release resulting from a severe collision with another ship is determined not by the likelihood of compromising a single, robust package but by the probability that a certain fraction of 10`s or 100`s of individual packagings is compromised. The previous analysis involved a statistical estimation of the frequency of accidents which would result in damage to a cask located in one of seven cargo holds in a collision with another ship. The results were obtained in the form of probabilities (frequencies) of accidents of increasing severity and of release fractions for each level of severity. This paper describes an extension of the same general method in which the multiple packages are assumed to be compacted by an intruding ship`s bow until there is no free space in the hold. At such a point, the remaining energy of the colliding ship is assumed to be dissipated by progressively crushing the RAM packagings and the probability of a particular fraction of package failures is estimated by adaptation of the statistical method used previously. The parameters of a common, well characterized packaging, the 6M with 2R inner containment vessel, were employed as an illustrative example of this analysis method. However, the method is readily applicable to other packagings for which crush strengths have been measured or can be estimated with satisfactory confidence.

  18. Coupled RELAP5 and CONTAIN accident analysis using PVM

    SciTech Connect

    Smith, K.A.; Baratta, A.J.; Robinson, G.E.

    1995-01-01

    This article describes the development of an integrated accident analysis capability considering both reactor vessel and containment system responses. This integrated package, which uses the RELAP5 and CONTAIN computer codes, provides the user with greater accuracy and modeling flexibility when compared with accident analyses using these codes separately. Multiprocessing, together with message-passing-based data transfer, enables these concurrent RELAP5 and CONTAIN calculations. The data transfer facilitates the coupling between the reactor vessel and containment portions of the calculation. The Parallel Virtual Machine software system running on a network of IBM RISC System/6000 workstations provided the multiprocessing capabilities required for this work. The results of an anticipated-transient-without-scram scenario for a boiling-water reactor nuclear power plant are provided. For the scenario analyzed, the containment temperatures and pressures that were predicted on the basis of the stand-alone codes and standard analysis methods were lower than those predicted with the use of the integrated code package. 12 refs., 10 figs., 7 tabs.

  19. Coupled Relap5 and Contain accident analysis using PVM

    SciTech Connect

    Smith, K.A.; Baratta, A.J.; Robinson, G.E.

    1995-10-01

    This article describes the development of an integrated accident analysis capability considering both reactor vessel and containment system responses. This integrated package, which uses the RELAP5 and CONTAIN computer codes, provides the user with greater accuracy and modeling flexibility when compared with accident analyses using these codes separately. Multiprocessing, together with message-passing-based data transfer, enables these concurrent RELAP5 and CONTAIN calculations. The data transfer facilitates the coupling between the reactor vessel and containment portions of the calculation. The Parallel Virtual Machine software system running on a network of IBM RISC System/6000 workstations provided the multiprocessing capabilities required for this work. The results of an anticipated-transient-without-scram scenario for a boiling-water reactor nuclear power plant are provided. For the scenario analyzed, the containment temperatures and pressures that were predicted on the basis of the stand-alone codes and standard analysis methods were lower (i.e., less conservative) than those predicted with the use of the integrated code package.

  20. Analysis of surface powered haulage accidents, January 1990--July 1996

    SciTech Connect

    Fesak, G.M.; Breland, R.M.; Spadaro, J.

    1996-12-31

    This report addresses surface haulage accidents that occurred between January 1990 and July 1996 involving haulage trucks (including over-the-road trucks), front-end-loaders, scrapers, utility trucks, water trucks, and other mobile haulage equipment. The study includes quarries, open pits and surface coal mines utilizing self-propelled mobile equipment to transport personnel, supplies, rock, overburden material, ore, mine waste, or coal for processing. A total of 4,397 accidents were considered. This report summarizes the major factors that led to the accidents and recommends accident prevention methods to reduce the frequency of these accidents.

  1. Characteristics of injuries caused by paragliding accidents: A cross-sectional study

    PubMed Central

    Canbek, Umut; İmerci, Ahmet; Akgün, Ulaş; Yeşil, Murat; Aydin, Ali; Balci, Yasemin

    2015-01-01

    BACKGROUND: This study was undertaken to analyze the characteristics and risk factors relating to fatalities and injuries caused by paragliding. METHODS: The judicial examination reports and hospital documents of 82 patients traumatized in 64 accidents during 242 355 paragliding jumps between August 2004 and September 2011 were analyzed. RESULTS: In these accidents, 18 of the 82 patients lost their lives. In the patients with a confirmed cause of accident, most of them were involved with multiple fractures and internal organ injuries (n=8, 44.4%). CONCLUSION: We investigated the incidence of paragliding injuries, the types of the injuries, and the severity of affected anatomical regions. The findings are significant for the prevention of paragliding injuries and future research. PMID:26401185

  2. An Analysis of U.S. Civil Rotorcraft Accidents by Cost and Injury (1990-1996)

    NASA Technical Reports Server (NTRS)

    Iseler, Laura; DeMaio, Joe; Rutkowski, Michael (Technical Monitor)

    2002-01-01

    A study of rotorcraft accidents was conducted to identify safety issues and research areas that might lead to a reduction in rotorcraft accidents and fatalities. The primary source of data was summaries of National Transportation Safety Board (NTSB) accident reports. From 1990 to 1996, the NTSB documented 1396 civil rotorcraft accidents in the United States in which 491 people were killed. The rotorcraft data were compared to airline and general aviation data to determine the relative safety of rotorcraft compared to other segments of the aviation industry. In depth analysis of the rotorcraft data addressed demographics, mission, and operational factors. Rotorcraft were found to have an accident rate about ten times that of commercial airliners and about the same as that of general aviation. The likelihood that an accident would be fatal was about equal for all three classes of operation. The most dramatic division in rotorcraft accidents is between flights flown by private pilots versus professional pilots. Private pilots, flying low cost aircraft in benign environments, have accidents that are due, in large part, to their own errors. Professional pilots, in contrast, are more likely to have accidents that are a result of exacting missions or use of specialized equipment. For both groups judgement error is more likely to lead to a fatal accident than are other types of causes. Several approaches to improving the rotorcraft accident rate are recommended. These mostly address improvement in the training of new pilots and improving the safety awareness of private pilots.

  3. An analysis of evacuation options for nuclear accidents

    SciTech Connect

    Tawil, J.J.; Strenge, D.L.; Schultz, R.W.

    1987-11-01

    In this report we consider the threat posed by the accidental release of radionuclides from a nuclear power plant. The objective is to establish relationships between radiation dose and the cost of evacuation under a wide variety of conditions. The dose can almost always be reduced by evacuating the population from a larger area. However, extending the evacuation zone outward will cause evacuation costs to increase. The purpose of this analysis was to provide the Environmental Protection Agency (EPA) a data base for evaluating whether implementation costs and risks averted could be used to justify evacuation at lower doses. The procedures used and results of these analyses are being made available as background information for use by others. We develop cost/dose relationships for 54 scenarios that are based upon the severity of the reactor accident, meteorological conditions during the release of radionuclides into the environment, and the angular width of the evacuation zone. The 54 scenarios are derived from combinations of three accident severity levels, six meteorological conditions and evacuation zone widths of 70{degree}, 90{degree}, and 180{degree}.

  4. An Accident Precursor Analysis Process Tailored for NASA Space Systems

    NASA Technical Reports Server (NTRS)

    Groen, Frank; Stamatelatos, Michael; Dezfuli, Homayoon; Maggio, Gaspare

    2010-01-01

    Accident Precursor Analysis (APA) serves as the bridge between existing risk modeling activities, which are often based on historical or generic failure statistics, and system anomalies, which provide crucial information about the failure mechanisms that are actually operative in the system and which may differ in frequency or type from those in the various models. These discrepancies between the models (perceived risk) and the system (actual risk) provide the leading indication of an underappreciated risk. This paper presents an APA process developed specifically for NASA Earth-to-Orbit space systems. The purpose of the process is to identify and characterize potential sources of system risk as evidenced by anomalous events which, although not necessarily presenting an immediate safety impact, may indicate that an unknown or insufficiently understood risk-significant condition exists in the system. Such anomalous events are considered accident precursors because they signal the potential for severe consequences that may occur in the future, due to causes that are discernible from their occurrence today. Their early identification allows them to be integrated into the overall system risk model used to intbrm decisions relating to safety.

  5. Decontamination analysis of the NUWAX-83 accident site using DECON

    SciTech Connect

    Tawil, J.J.

    1983-11-01

    This report presents an analysis of the site restoration options for the NUWAX-83 site, at which an exercise was conducted involving a simulated nuclear weapons accident. This analysis was performed using a computer program deveoped by Pacific Northwest Laboratory. The computer program, called DECON, was designed to assist personnel engaged in the planning of decontamination activities. The many features of DECON that are used in this report demonstrate its potential usefulness as a site restoration planning tool. Strategies that are analyzed with DECON include: (1) employing a Quick-Vac option, under which selected surfaces are vacuumed before they can be rained on; (2) protecting surfaces against precipitation; (3) prohibiting specific operations on selected surfaces; (4) requiring specific methods to be used on selected surfaces; (5) evaluating the trade-off between cleanup standards and decontamination costs; and (6) varying of the cleanup standards according to expected exposure to surface.

  6. Accidents in the context of study among university students--a multicentre cross-sectional study in North Rhine-Westphalia, Germany.

    PubMed

    Faller, Gudrun; Mikolajczyk, Rafael T; Akmatov, Manas K; Meier, Sabine; Krämer, Alexander

    2010-03-01

    Knowledge about prevalence and patterns of accidents among university students is scarce. The aims of the present health survey were to assess the general prevalence of accidents among university students, to describe the specific kinds of accidents, and to analyse associated factors. A multicentre cross-sectional health survey was conducted at 12 universities and 4 universities of applied sciences in North Rhine-Westphalia (NRW), Germany. The response rate was 88%. The self-administered questionnaire covered multiple areas of health, behaviours and a specific module for accidents. In total, 252 (8.8%) out of 2855 students (aged 17-26 years) had experienced an accident in the context of their studies. Contusions, compressions and strains constituted more than 50% of all kinds of injuries, while fractures, irritations, burns or acid burns were reported less frequently. The cumulative risk of experiencing an accident was increasing linearly with the study duration, indicating an absence of a specific vulnerable period. Nearly 60% of all accidents took place during study-related sports activities, and about a quarter of all accidents occurred on the way to or from university. Only few accidents occurred on university floors, in lecture rooms or on stairways. Further studies are needed to assess more in depth the causes of accidents and the situation immediately preceding the event before making specific recommendations for prevention.

  7. Preliminary analysis of loss-of-coolant accident in Fukushima nuclear accident

    SciTech Connect

    Su'ud, Zaki; Anshari, Rio

    2012-06-06

    Loss-of-Coolant Accident (LOCA) in Boiling Water Reactor (BWR) especially on Fukushima Nuclear Accident will be discussed in this paper. The Tohoku earthquake triggered the shutdown of nuclear power reactors at Fukushima Nuclear Power station. Though shutdown process has been completely performed, cooling process, at much smaller level than in normal operation, is needed to remove decay heat from the reactor core until the reactor reach cold-shutdown condition. If LOCA happen at this condition, it will cause the increase of reactor fuel and other core temperatures and can lead to reactor core meltdown and exposure of radioactive material to the environment such as in the Fukushima Dai Ichi nuclear accident case. In this study numerical simulation has been performed to calculate pressure composition, water level and temperature distribution on reactor during this accident. There are two coolant regulating system that operational on reactor unit 1 at this accident, Isolation Condensers (IC) system and Safety Relief Valves (SRV) system. Average mass flow of steam to the IC system in this event is 10 kg/s and could keep reactor core from uncovered about 3,2 hours and fully uncovered in 4,7 hours later. There are two coolant regulating system at operational on reactor unit 2, Reactor Core Isolation Condenser (RCIC) System and Safety Relief Valves (SRV). Average mass flow of coolant that correspond this event is 20 kg/s and could keep reactor core from uncovered about 73 hours and fully uncovered in 75 hours later. There are three coolant regulating system at operational on reactor unit 3, Reactor Core Isolation Condenser (RCIC) system, High Pressure Coolant Injection (HPCI) system and Safety Relief Valves (SRV). Average mass flow of water that correspond this event is 15 kg/s and could keep reactor core from uncovered about 37 hours and fully uncovered in 40 hours later.

  8. Evaluation of potential severe accidents during low power and shutdown operations at Grand Gulf, Unit 1. Volume 2, Part 1C: Analysis of core damage frequency from internal events for plant operational State 5 during a refueling outage, Main report (Sections 11--14)

    SciTech Connect

    Whitehead, D.; Darby, J.; Yakle, J.

    1994-06-01

    This document contains the accident sequence analysis of internally initiated events for Grand Gulf, Unit 1 as it operates in the Low Power and Shutdown Plant Operational State 5 during a refueling outage. The report documents the methodology used during the analysis, describes the results from the application of the methodology, and compares the results with the results from two full power analyses performed on Grand Gulf.

  9. The accident analysis of mobile mine machinery in Indian opencast coal mines.

    PubMed

    Kumar, R; Ghosh, A K

    2014-01-01

    This paper presents the analysis of large mining machinery related accidents in Indian opencast coal mines. The trends of coal production, share of mining methods in production, machinery deployment in open cast mines, size and population of machinery, accidents due to machinery, types and causes of accidents have been analysed from the year 1995 to 2008. The scrutiny of accidents during this period reveals that most of the responsible factors are machine reversal, haul road design, human fault, operator's fault, machine fault, visibility and dump design. Considering the types of machines, namely, dumpers, excavators, dozers and loaders together the maximum number of fatal accidents has been caused by operator's faults and human faults jointly during the period from 1995 to 2008. The novel finding of this analysis is that large machines with state-of-the-art safety system did not reduce the fatal accidents in Indian opencast coal mines.

  10. Analysis of Waste Leak and Toxic Chemical Release Accidents from Waste Feed Delivery (WFD) Diluent System

    SciTech Connect

    WILLIAMS, J.C.

    2000-09-15

    Radiological and toxicological consequences are calculated for 4 postulated accidents involving the Waste Feed Delivery (WFD) diluent addition systems. Consequences for the onsite and offsite receptor are calculated. This analysis contains technical information used to determine the accident consequences for the River Protection Project (RPP) Final Safety Analysis Report (FSAR).

  11. Radionuclide Analysis on Bamboos following the Fukushima Nuclear Accident

    PubMed Central

    Higaki, Takumi; Higaki, Shogo; Hirota, Masahiro; Akita, Kae; Hasezawa, Seiichiro

    2012-01-01

    In response to contamination from the recent Fukushima nuclear accident, we conducted radionuclide analysis on bamboos sampled from six sites within a 25 to 980 km radius of the Fukushima Daiichi nuclear power plant. Maximum activity concentrations of radiocesium 134Cs and 137Cs in samples from Fukushima city, 65 km away from the Fukushima Daiichi plant, were in excess of 71 and 79 kBq/kg, dry weight (DW), respectively. In Kashiwa city, 195 km away from the Fukushima Daiichi, the sample concentrations were in excess of 3.4 and 4.3 kBq/kg DW, respectively. In Toyohashi city, 440 km away from the Fukushima Daiichi, the concentrations were below the measurable limits of up to 4.5 Bq/kg DW. In the radiocesium contaminated samples, the radiocesium activity was higher in mature and fallen leaves than in young leaves, branches and culms. PMID:22496858

  12. Linguistic methodology for the analysis of aviation accidents

    NASA Technical Reports Server (NTRS)

    Goguen, J. A.; Linde, C.

    1983-01-01

    A linguistic method for the analysis of small group discourse, was developed and the use of this method on transcripts of commercial air transpot accidents is demonstrated. The method identifies the discourse types that occur and determine their linguistic structure; it identifies significant linguistic variables based upon these structures or other linguistic concepts such as speech act and topic; it tests hypotheses that support significance and reliability of these variables; and it indicates the implications of the validated hypotheses. These implications fall into three categories: (1) to train crews to use more nearly optimal communication patterns; (2) to use linguistic variables as indices for aspects of crew performance such as attention; and (3) to provide guidelines for the design of aviation procedures and equipment, especially those that involve speech.

  13. Hypothetical accident conditions thermal analysis of the 5320 package

    SciTech Connect

    Hensel, S.J.; Gromada, R.J.

    1995-12-31

    An axisymmetric model of the 5320 package was created to perform hypothetical accident conditions (HAC) thermal calculations. The analyses assume the 5320 package contains 359 grams of plutonium-238 (203 Watts) in the form of an oxide powder at a minimum density of 2.4 g/cc or at a maximum density of 11.2 g/cc. The solution from a non-solar 100 F ambient steady-state analysis was used as the initial conditions for the fire transient. A 30 minute 1,475 F fire transient followed by cooling via natural convection and thermal radiation to a 100 F non-solar environment was analyzed to determine peak component temperatures and vessel pressures. The 5320 package was considered to be horizontally suspended within the fire during the entire transient.

  14. Aircraft Accident Prevention: Loss-of-Control Analysis

    NASA Technical Reports Server (NTRS)

    Kwatny, Harry G.; Dongmo, Jean-Etienne T.; Chang, Bor-Chin; Bajpai, Guarav; Yasar, Murat; Belcastro, Christine M.

    2009-01-01

    The majority of fatal aircraft accidents are associated with loss-of-control . Yet the notion of loss-of-control is not well-defined in terms suitable for rigorous control systems analysis. Loss-of-control is generally associated with flight outside of the normal flight envelope, with nonlinear influences, and with an inability of the pilot to control the aircraft. The two primary sources of nonlinearity are the intrinsic nonlinear dynamics of the aircraft and the state and control constraints within which the aircraft must operate. In this paper we examine how these nonlinearities affect the ability to control the aircraft and how they may contribute to loss-of-control. Examples are provided using NASA s Generic Transport Model.

  15. Tobit analysis of vehicle accident rates on interstate highways.

    PubMed

    Anastasopoulos, Panagiotis Ch; Tarko, Andrew P; Mannering, Fred L

    2008-03-01

    There has been an abundance of research that has used Poisson models and its variants (negative binomial and zero-inflated models) to improve our understanding of the factors that affect accident frequencies on roadway segments. This study explores the application of an alternate method, tobit regression, by viewing vehicle accident rates directly (instead of frequencies) as a continuous variable that is left-censored at zero. Using data from vehicle accidents on Indiana interstates, the estimation results show that many factors relating to pavement condition, roadway geometrics and traffic characteristics significantly affect vehicle accident rates.

  16. Advanced accident sequence precursor analysis level 1 models

    SciTech Connect

    Sattison, M.B.; Thatcher, T.A.; Knudsen, J.K.; Schroeder, J.A.; Siu, N.O.

    1996-03-01

    INEL has been involved in the development of plant-specific Accident Sequence Precursor (ASP) models for the past two years. These models were developed for use with the SAPHIRE suite of PRA computer codes. They contained event tree/linked fault tree Level 1 risk models for the following initiating events: general transient, loss-of-offsite-power, steam generator tube rupture, small loss-of-coolant-accident, and anticipated transient without scram. Early in 1995 the ASP models were revised based on review comments from the NRC and an independent peer review. These models were released as Revision 1. The Office of Nuclear Regulatory Research has sponsored several projects at the INEL this fiscal year to further enhance the capabilities of the ASP models. Revision 2 models incorporates more detailed plant information into the models concerning plant response to station blackout conditions, information on battery life, and other unique features gleaned from an Office of Nuclear Reactor Regulation quick review of the Individual Plant Examination submittals. These models are currently being delivered to the NRC as they are completed. A related project is a feasibility study and model development of low power/shutdown (LP/SD) and external event extensions to the ASP models. This project will establish criteria for selection of LP/SD and external initiator operational events for analysis within the ASP program. Prototype models for each pertinent initiating event (loss of shutdown cooling, loss of inventory control, fire, flood, seismic, etc.) will be developed. A third project concerns development of enhancements to SAPHIRE. In relation to the ASP program, a new SAPHIRE module, GEM, was developed as a specific user interface for performing ASP evaluations. This module greatly simplifies the analysis process for determining the conditional core damage probability for a given combination of initiating events and equipment failures or degradations.

  17. Analysis of injury severity and vehicle occupancy in truck- and non-truck-involved accidents.

    PubMed

    Chang, L Y; Mannering, F

    1999-09-01

    The impact that large trucks have on accident severity has long been a concern in the accident analysis literature. One important measure of accident severity is the most severely injured occupant in the vehicle. Such data are routinely collected in state accident data files in the U.S. Among the many risk factors that determine the most severe level of injury sustained by vehicle occupants, the number of occupants in the vehicle is an important factor. These effects can be significant because vehicles with higher occupancies have an increased likelihood of having someone seriously injured. This paper studies the occupancy/injury severity relationship using Washington State accident data. The effects of large trucks, which are shown to have a significant impact on the most severely injured vehicle occupant, are accounted for by separately estimating nested logit models for truck-involved accidents and for non-truck-involved accidents. The estimation results uncover important relationships between various risk factors and occupant injury. In addition, by comparing the accident characteristics between truck-involved accidents and non-truck-involved accidents, the risk factors unique to large trucks are identified along with the relative importance of such factors. The findings of this study demonstrate that nested logit modeling, which is able to take into account vehicle occupancy effects and identify a broad range of factors that influence occupant injury, is a promising methodological approach.

  18. Swimming pool immersion accidents: an analysis from the Brisbane Drowning Study

    PubMed Central

    Pearn, John H; Nixon, James

    1997-01-01

    An analysis of a consecutive series of 66 swimming pool immersion accidents is presented; 74% of these occurred in in-ground swimming pools. The estimated accident rate per pool is fives times greater for in-ground pools compared with above-ground pools, where pools are inadequately fenced. Backyard swimming pools account for 74% of pool accidents. Motel and caravan park pools account for 9% of childhood immersion accidents, but the survival rate (17%) is very low. Fifty per cent of pool accidents occur in the family's own backyard pool, and 13.6% in a neighbour's pool; in the latter the survival rate is still low at only 33%. In only one of the 66 cases was there an adequate safety fence; in 76% of cases there was no fence or barrier whatsoever. Tables of swimming pool accidents by age, season, site, and outcome are presented. PMID:9493630

  19. Progress in accident analysis of the HYLIFE-II inertial fusion energy power plant design

    SciTech Connect

    Reyes, S; Latkowski, J F; Gomez del Rio, J; Sanz, J

    2000-10-11

    The present work continues our effort to perform an integrated safety analysis for the HYLIFE-II inertial fusion energy (IFE) power plant design. Recently we developed a base case for a severe accident scenario in order to calculate accident doses for HYLIFE-II. It consisted of a total loss of coolant accident (LOCA) in which all the liquid flibe (Li{sub 2}BeF{sub 4}) was lost at the beginning of the accident. Results showed that the off-site dose was below the limit given by the DOE Fusion Safety Standards for public protection in case of accident, and that his dose was dominated by the tritium released during the accident.

  20. Minimum Accident of Concern - A Different Basis for CAS Analysis

    SciTech Connect

    Biswas, D.

    2002-01-31

    A Criticality Alarm System is normally designed to detect immediately the minimum accident of concern. This report covers the methodology to establish a different minimum accident of concern developed for shielded facilities and applied to a case of the canyon sump excursion in a Savannah River Site facility.

  1. Quantitative uncertainty and sensitivity analysis of a PWR control rod ejection accident

    SciTech Connect

    Pasichnyk, I.; Perin, Y.; Velkov, K.

    2013-07-01

    The paper describes the results of the quantitative Uncertainty and Sensitivity (U/S) Analysis of a Rod Ejection Accident (REA) which is simulated by the coupled system code ATHLET-QUABOX/CUBBOX applying the GRS tool for U/S analysis SUSA/XSUSA. For the present study, a UOX/MOX mixed core loading based on a generic PWR is modeled. A control rod ejection is calculated for two reactor states: Hot Zero Power (HZP) and 30% of nominal power. The worst cases for the rod ejection are determined by steady-state neutronic simulations taking into account the maximum reactivity insertion in the system and the power peaking factor. For the U/S analysis 378 uncertain parameters are identified and quantified (thermal-hydraulic initial and boundary conditions, input parameters and variations of the two-group cross sections). Results for uncertainty and sensitivity analysis are presented for safety important global and local parameters. (authors)

  2. An analysis of three weather-related aircraft accidents

    NASA Technical Reports Server (NTRS)

    Fujita, T. T.; Caracena, F.

    1977-01-01

    Two aircraft accidents in 1975, one at John F. Kennedy International Airport in New York City on 24 June and the other at Stapleton International Airport in Denver on 7 August, were examined in detail. A third accident on 23 June 1976 at Philadelphia International Airport is being investigated. Amazingly, there was a spearhead echo just to the north of each accident site. The echoes formed from 5 to 50 min in advance of the accident and moved faster than other echoes in the vicinity. These echoes were photographed by National Weather Service radars, 130-205 km away. At closer ranges, however, one or more circular echoes were depicted by airborne and ground radars. These cells were only 3-5 km in diameter, but they were accompanied by downdrafts of extreme intensity, called downbursts. All accidents occurred as aircraft, either descending or climbing, lost altitude while experiencing strong wind shear inside downburst cells.

  3. GPHS-RTG launch accident analysis for Galileo and Ulysses

    NASA Astrophysics Data System (ADS)

    Bradshaw, C. Thomas

    1991-01-01

    This paper presents the safety program conducted to determine the response of the General Purpose Heat Source (GPHS) Radioisotope Thermoelectric Generator (RTG) to potential launch accidents of the Space Shuttle for the Galileo and Ulysses missions. The National Aeronautics and Space Administration (NASA) provided definition of the Shuttle potential accidents and characterized the environments. The Launch Accident Scenario Evaluation Program (LASEP) was developed by GE to analyze the RTG response to these accidents. RTG detailed response to Solid Rocket Booster (SRB) fragment impacts, as well as to other types of impact, was obtained from an extensive series of hydrocode analyses. A comprehensive test program was conducted also to determine RTG response to the accident environments. The hydrocode response analyses coupled with the test data base provided the broad range response capability which was implemented in LASEP.

  4. An Evidential Reasoning-Based CREAM to Human Reliability Analysis in Maritime Accident Process.

    PubMed

    Wu, Bing; Yan, Xinping; Wang, Yang; Soares, C Guedes

    2017-01-09

    This article proposes a modified cognitive reliability and error analysis method (CREAM) for estimating the human error probability in the maritime accident process on the basis of an evidential reasoning approach. This modified CREAM is developed to precisely quantify the linguistic variables of the common performance conditions and to overcome the problem of ignoring the uncertainty caused by incomplete information in the existing CREAM models. Moreover, this article views maritime accident development from the sequential perspective, where a scenario- and barrier-based framework is proposed to describe the maritime accident process. This evidential reasoning-based CREAM approach together with the proposed accident development framework are applied to human reliability analysis of a ship capsizing accident. It will facilitate subjective human reliability analysis in different engineering systems where uncertainty exists in practice.

  5. A Human Factors Analysis of Fatal and Serious Injury Accidents in Alaska, 2004-2009

    DTIC Science & Technology

    2011-12-01

    During. the.analysis,.these.were.sometimes.referred.to.as.“ moose . 8..... stalls .”.All.but.one.of.these.accidents.ended.when.the...to.be.fair,. moose -watching.was.not.the.only.distraction .. Several.of.these.accidents.did.involve.looking.at.wildlife. (sheep,.wolves,.a.whale.bone

  6. Analysis of Construction Accidents in Turkey and Responsible Parties

    PubMed Central

    GÜRCANLI, G. Emre; MÜNGEN, Uğur

    2013-01-01

    Construction is one of the world’s biggest industry that includes jobs as diverse as building, civil engineering, demolition, renovation, repair and maintenance. Construction workers are exposed to a wide variety of hazards. This study analyzes 1,117 expert witness reports which were submitted to criminal and labour courts. These reports are from all regions of the country and cover the period 1972–2008. Accidents were classified by the consequence of the incident, time and main causes of the accident, construction type, occupation of the victim, activity at time of the accident and party responsible for the accident. Falls (54.1%), struck by thrown/falling object (12.9%), structural collapses (9.9%) and electrocutions (7.5%) rank first four places. The accidents were most likely between the hours 15:00 and 17:00 (22.6%), 10:00–12:00 (18.7%) and just after the lunchtime (9.9%). Additionally, the most common accidents were further divided into sub-types. Expert-witness assessments were used to identify the parties at fault and what acts of negligence typically lead to accidents. Nearly two thirds of the faulty and negligent acts are carried out by the employers and employees are responsible for almost one third of all cases. PMID:24077446

  7. Analysis of construction accidents in Turkey and responsible parties.

    PubMed

    Gürcanli, G Emre; Müngen, Uğur

    2013-01-01

    Construction is one of the world's biggest industry that includes jobs as diverse as building, civil engineering, demolition, renovation, repair and maintenance. Construction workers are exposed to a wide variety of hazards. This study analyzes 1,117 expert witness reports which were submitted to criminal and labour courts. These reports are from all regions of the country and cover the period 1972-2008. Accidents were classified by the consequence of the incident, time and main causes of the accident, construction type, occupation of the victim, activity at time of the accident and party responsible for the accident. Falls (54.1%), struck by thrown/falling object (12.9%), structural collapses (9.9%) and electrocutions (7.5%) rank first four places. The accidents were most likely between the hours 15:00 and 17:00 (22.6%), 10:00-12:00 (18.7%) and just after the lunchtime (9.9%). Additionally, the most common accidents were further divided into sub-types. Expert-witness assessments were used to identify the parties at fault and what acts of negligence typically lead to accidents. Nearly two thirds of the faulty and negligent acts are carried out by the employers and employees are responsible for almost one third of all cases.

  8. A POTENTIAL APPLICATION OF UNCERTAINTY ANALYSIS TO DOE-STD-3009-94 ACCIDENT ANALYSIS

    SciTech Connect

    Palmrose, D E; Yang, J M

    2007-05-10

    The objective of this paper is to assess proposed transuranic waste accident analysis guidance and recent software improvements in a Windows-OS version of MACCS2 that allows the inputting of parameter uncertainty. With this guidance and code capability, there is the potential to perform a quantitative uncertainty assessment of unmitigated accident releases with respect to the 25 rem Evaluation Guideline (EG) of DOE-STD-3009-94 CN3 (STD-3009). Historically, the classification of safety systems in a U.S. Department of Energy (DOE) nuclear facility's safety basis has involved how subject matter experts qualitatively view uncertainty in the STD-3009 Appendix A accident analysis methodology. Specifically, whether consequence uncertainty could be larger than previously evaluated so the site-specific accident consequences may challenge the EG. This paper assesses whether a potential uncertainty capability for MACCS2 could provide a stronger technical basis as to when the consequences from a design basis accident (DBA) truly challenges the 25 rem EG.

  9. Accidents and injuries related to powered paragliding: a cross-sectional study

    PubMed Central

    Feletti, Francesco; Goin, Jeff

    2014-01-01

    Objectives Powered paragliding (PPG) and paragliding are two totally different sports, mainly because of the use of an engine in powered paragliding. As a consequence, the pattern of injuries caused by each of these two sports may be different. Setting To test this hypothesis, we analysed 384 incident reports gathered by the US Powered Paragliding Association from 1995 to 2012. The majority of the incidents occurred in the USA, while 26 incidents occurred elsewhere: Canada (8), Mexico (5), Panama (1), China (1), Japan (1), Malaysia (1), Indonesia (Java) (1), Europe (8): of which Spain (1), Belgium (1), UK (3), Italy (1), Romania (1), unknown (1). Outcome To identify the most affected body area and the most common type of injury sustained in PPG, and to highlight any differences from paragliding. Results The most affected body areas in PPG were the upper limbs (44.5%), followed by the lower limbs (32%), the back (9.8%), the head (7%), the pelvis (3.1), the chest (2.7%) and the abdomen (0.7%) (p<0.001). The engine caused 43 accidents (11.2%) in our study and was responsible for the majority of injuries to the upper limbs. The number of fatal accidents in PPG is not lower than in paragliding and hang-gliding. Conclusions To help prevent the specific injuries of PPG, the most appropriate equipment should be identified. The results of this study also suggest that, in the future, this sport should be analysed separately from paragliding. PMID:25168039

  10. Accidents at Work and Costs Analysis: A Field Study in a Large Italian Company

    PubMed Central

    BATTAGLIA, Massimo; FREY, Marco; PASSETTI, Emilio

    2014-01-01

    Accidents at work are still a heavy burden in social and economic terms, and action to improve health and safety standards at work offers great potential gains not only to employers, but also to individuals and society as a whole. However, companies often are not interested to measure the costs of accidents even if cost information may facilitate preventive occupational health and safety management initiatives. The field study, carried out in a large Italian company, illustrates technical and organisational aspects associated with the implementation of an accident costs analysis tool. The results indicate that the implementation (and the use) of the tool requires a considerable commitment by the company, that accident costs analysis should serve to reinforce the importance of health and safety prevention and that the economic dimension of accidents is substantial. The study also suggests practical ways to facilitate the implementation and the moral acceptance of the accounting technology. PMID:24869894

  11. Accidents at work and costs analysis: a field study in a large Italian company.

    PubMed

    Battaglia, Massimo; Frey, Marco; Passetti, Emilio

    2014-01-01

    Accidents at work are still a heavy burden in social and economic terms, and action to improve health and safety standards at work offers great potential gains not only to employers, but also to individuals and society as a whole. However, companies often are not interested to measure the costs of accidents even if cost information may facilitate preventive occupational health and safety management initiatives. The field study, carried out in a large Italian company, illustrates technical and organisational aspects associated with the implementation of an accident costs analysis tool. The results indicate that the implementation (and the use) of the tool requires a considerable commitment by the company, that accident costs analysis should serve to reinforce the importance of health and safety prevention and that the economic dimension of accidents is substantial. The study also suggests practical ways to facilitate the implementation and the moral acceptance of the accounting technology.

  12. Sodium fast reactor gaps analysis of computer codes and models for accident analysis and reactor safety.

    SciTech Connect

    Carbajo, Juan; Jeong, Hae-Yong; Wigeland, Roald; Corradini, Michael; Schmidt, Rodney Cannon; Thomas, Justin; Wei, Tom; Sofu, Tanju; Ludewig, Hans; Tobita, Yoshiharu; Ohshima, Hiroyuki; Serre, Frederic

    2011-06-01

    This report summarizes the results of an expert-opinion elicitation activity designed to qualitatively assess the status and capabilities of currently available computer codes and models for accident analysis and reactor safety calculations of advanced sodium fast reactors, and identify important gaps. The twelve-member panel consisted of representatives from five U.S. National Laboratories (SNL, ANL, INL, ORNL, and BNL), the University of Wisconsin, the KAERI, the JAEA, and the CEA. The major portion of this elicitation activity occurred during a two-day meeting held on Aug. 10-11, 2010 at Argonne National Laboratory. There were two primary objectives of this work: (1) Identify computer codes currently available for SFR accident analysis and reactor safety calculations; and (2) Assess the status and capability of current US computer codes to adequately model the required accident scenarios and associated phenomena, and identify important gaps. During the review, panel members identified over 60 computer codes that are currently available in the international community to perform different aspects of SFR safety analysis for various event scenarios and accident categories. A brief description of each of these codes together with references (when available) is provided. An adaptation of the Predictive Capability Maturity Model (PCMM) for computational modeling and simulation is described for use in this work. The panel's assessment of the available US codes is presented in the form of nine tables, organized into groups of three for each of three risk categories considered: anticipated operational occurrences (AOOs), design basis accidents (DBA), and beyond design basis accidents (BDBA). A set of summary conclusions are drawn from the results obtained. At the highest level, the panel judged that current US code capabilities are adequate for licensing given reasonable margins, but expressed concern that US code development activities had stagnated and that the

  13. Risk analysis of emergent water pollution accidents based on a Bayesian Network.

    PubMed

    Tang, Caihong; Yi, Yujun; Yang, Zhifeng; Sun, Jie

    2016-01-01

    To guarantee the security of water quality in water transfer channels, especially in open channels, analysis of potential emergent pollution sources in the water transfer process is critical. It is also indispensable for forewarnings and protection from emergent pollution accidents. Bridges above open channels with large amounts of truck traffic are the main locations where emergent accidents could occur. A Bayesian Network model, which consists of six root nodes and three middle layer nodes, was developed in this paper, and was employed to identify the possibility of potential pollution risk. Dianbei Bridge is reviewed as a typical bridge on an open channel of the Middle Route of the South to North Water Transfer Project where emergent traffic accidents could occur. Risk of water pollutions caused by leakage of pollutants into water is focused in this study. The risk for potential traffic accidents at the Dianbei Bridge implies a risk for water pollution in the canal. Based on survey data, statistical analysis, and domain specialist knowledge, a Bayesian Network model was established. The human factor of emergent accidents has been considered in this model. Additionally, this model has been employed to describe the probability of accidents and the risk level. The sensitive reasons for pollution accidents have been deduced. The case has also been simulated that sensitive factors are in a state of most likely to lead to accidents.

  14. [Paragliding accidents--a prospective analysis in Swiss mountain regions].

    PubMed

    Lautenschlager, S; Karli, U; Matter, P

    1993-01-01

    During the period from 1.1 to 31.12.90, 86 injuries associated with paragliding were analysed in a prospective study in 12 different Swiss hospitals with reference to causes, patterns, and frequencies. Spine injuries (36%) and lesions of the lower extremities (35%) were diagnosed most frequently. Surprisingly no neurological complications occurred, which is possibly explained by the solitary axial trauma. In 15 cases very severe malleolar fractures required surgical intervention. One accident was fatal due to a lung rupture. 60% of all accidents happened during the landing phase, 26% at launching and 14% at flight. Half of the pilots were affected in their primary training course. Most accidents were due to an in-flight error of judgement, such as incorrect estimation of wind conditions and a choice of unfavourable landing sites. In contrast to early reports of hang-gliding injuries, only one accident was due to an equipment failure, namely a ruptured steering line. In more than a third of all accidents, the used paraglider was not in correct correlation with the pilot's weight and experience. Inspired by the desire for a long flight, gliders of too large surface-areas were often used, leading to a more unstable flight. To reduce the frequency of paragliding injuries, an accurate choice of equipment and increased attention to environmental factors is mandatory. Furthermore education-programs should focus more on intensifying the pilot's mental and practical skills.

  15. Action Plan for updated Chapter 15 Accident Analysis in the SRS Production Reactor SAR

    SciTech Connect

    Hightower, N.T. III; Burnett, T.W.

    1989-11-15

    This report describes the Action Plan for the upgrade of the Chapter 15 Accident Analysis in the SRS Production Reactor SAR required for K-Restart. This Action Plan will be updated periodically to reflect task accomplishments and issue resolutions.

  16. Preliminary Assessment of ICRP Dose Conversion Factor Recommendations for Accident Analysis Applications

    SciTech Connect

    Vincent, A.M.

    2002-03-13

    Accident analysis for U.S. Department of Energy (DOE) nuclear facilities is an integral part of the overall safety basis developed by the contractor to demonstrate facility operation can be conducted safely. An appropriate documented safety analysis for a facility discusses accident phenomenology, quantifies source terms arising from postulated process upset conditions, and applies a standardized, internationally-recognized database of dose conversion factors (DCFs) to evaluate radiological conditions to offsite receptors.

  17. School sports accidents: analysis of causes, modes, and frequencies.

    PubMed

    Kelm, J; Ahlhelm, F; Pape, D; Pitsch, W; Engel, C

    2001-01-01

    About 5% of all school children are seriously injured during physical education every year. Because of its influence on children's attitude toward sports and the economic aspects, an evaluation of causes and medical consequences is necessary. In this study, 213 school sports accidents were investigated. Besides diagnosis, the localization of injuries, as well as the duration of the sick leave were documented. Average age of injured students was 13 years. Most of the injured students blamed themselves for the accident. The most common injuries were sprains, contusions, and fractures. Main reasons for the accidents were faults in basic motion training. Playing soccer and basketball were the most frequent reasons for injuries. The upper extremity was more frequently involved than the lower extremity. Sports physicians and teachers should work out a program outlining the individual needs and capabilities of the injured students to reintegrate them into physical education.

  18. Accident Precursor Analysis and Management: Reducing Technological Risk Through Diligence

    NASA Technical Reports Server (NTRS)

    Phimister, James R. (Editor); Bier, Vicki M. (Editor); Kunreuther, Howard C. (Editor)

    2004-01-01

    Almost every year there is at least one technological disaster that highlights the challenge of managing technological risk. On February 1, 2003, the space shuttle Columbia and her crew were lost during reentry into the atmosphere. In the summer of 2003, there was a blackout that left millions of people in the northeast United States without electricity. Forensic analyses, congressional hearings, investigations by scientific boards and panels, and journalistic and academic research have yielded a wealth of information about the events that led up to each disaster, and questions have arisen. Why were the events that led to the accident not recognized as harbingers? Why were risk-reducing steps not taken? This line of questioning is based on the assumption that signals before an accident can and should be recognized. To examine the validity of this assumption, the National Academy of Engineering (NAE) undertook the Accident Precursors Project in February 2003. The project was overseen by a committee of experts from the safety and risk-sciences communities. Rather than examining a single accident or incident, the committee decided to investigate how different organizations anticipate and assess the likelihood of accidents from accident precursors. The project culminated in a workshop held in Washington, D.C., in July 2003. This report includes the papers presented at the workshop, as well as findings and recommendations based on the workshop results and committee discussions. The papers describe precursor strategies in aviation, the chemical industry, health care, nuclear power and security operations. In addition to current practices, they also address some areas for future research.

  19. The Fukushima accident and travel medicine--analysis and recommendations.

    PubMed

    Scholl, C; Lieberz, W; Jansing, P; Küpper, T

    2013-01-01

    The accident at the nuclear site in Fukushima has fostered a fear of the consequences of radioactive contamination among many, especially regarding travel to Japan and the import of Japanese goods. We give a general overview of the assessment of the effects of ionizing radiation and a summary of the consequences of the Japanese accident. We report the results of the measurement of radionuclide intake among travelers returning from Japan, carried out at the whole-body counter of the Institute for Work Design of North Rhine-Westphalia (LIA.NRW) in Düsseldorf.

  20. DYNAMIC ANALYSIS OF HANFORD UNIRRADIATED FUEL PACKAGE SUBJECTED TO SEQUENTIAL LATERAL LOADS IN HYPOTHETICAL ACCIDENT CONDITIONS

    SciTech Connect

    Wu, T

    2008-04-30

    Large fuel casks present challenges when evaluating their performance in the Hypothetical Accident Conditions (HAC) specified in the Code of Federal Regulations Title 10 part 71 (10CFR71). Testing is often limited by cost, difficulty in preparing test units and the limited availability of facilities which can carry out such tests. In the past, many casks were evaluated without testing by using simplified analytical methods. This paper presents a numerical technique for evaluating the dynamic responses of large fuel casks subjected to sequential HAC loading. A nonlinear dynamic analysis was performed for a Hanford Unirradiated Fuel Package (HUFP) [1] to evaluate the cumulative damage after the hypothetical accident Conditions of a 30-foot lateral drop followed by a 40-inch lateral puncture as specified in 10CFR71. The structural integrity of the containment vessel is justified based on the analytical results in comparison with the stress criteria, specified in the ASME Code, Section III, Appendix F [2], for Level D service loads. The analyzed cumulative damages caused by the sequential loading of a 30-foot lateral drop and a 40-inch lateral puncture are compared with the package test data. The analytical results are in good agreement with the test results.

  1. ACCIDENT ANALYSES & CONTROL OPTIONS IN SUPPORT OF THE SLUDGE WATER SYSTEM SAFETY ANALYSIS

    SciTech Connect

    WILLIAMS, J.C.

    2003-11-15

    This report documents the accident analyses and nuclear safety control options for use in Revision 7 of HNF-SD-WM-SAR-062, ''K Basins Safety Analysis Report'' and Revision 4 of HNF-SD-SNF-TSR-001, ''Technical Safety Requirements - 100 KE and 100 KW Fuel Storage Basins''. These documents will define the authorization basis for Sludge Water System (SWS) operations. This report follows the guidance of DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports'', for calculating onsite and offsite consequences. The accident analysis summary is shown in Table ES-1 below. While this document describes and discusses potential control options to either mitigate or prevent the accidents discussed herein, it should be made clear that the final control selection for any accident is determined and presented in HNF-SD-WM-SAR-062.

  2. Analysis of Kuosheng Station Blackout Accident Using MELCOR 1.8.4

    SciTech Connect

    Wang, S.-J.; Chien, C.-S.; Wang, T.-C.; Chiang, K.-S

    2000-11-15

    The MELCOR code, developed by Sandia National Laboratories, is a fully integrated, relatively fast-running code that models the progression of severe accidents in commercial light water nuclear power plants (NPPs).A specific station blackout (SBO) accident for Kuosheng (BWR-6) NPP is simulated using the MELCOR 1.8.4 code. The MELCOR input deck for Kuosheng NPP is established based on Kuosheng NPP design data and the MELCOR users' guides. The initial steady-state conditions are generated with a developed self-initialization algorithm. The main severe accident phenomena and the fission product release fractions associated with the SBO accident were simulated. The predicted results are plausible and as expected in light of current understanding of severe accident phenomena. The uncertainty of this analysis is briefly discussed. The important features of the MELCOR 1.8.4 are described. The estimated results provide useful information for the probabilistic risk assessment (PRA) of Kuosheng NPP. This tool will be applied to the PRA, the severe accident analysis, and the severe accident management study of Kuosheng NPP in the near future.

  3. Analysis of traffic accidents on rural highways using Latent Class Clustering and Bayesian Networks.

    PubMed

    de Oña, Juan; López, Griselda; Mujalli, Randa; Calvo, Francisco J

    2013-03-01

    One of the principal objectives of traffic accident analyses is to identify key factors that affect the severity of an accident. However, with the presence of heterogeneity in the raw data used, the analysis of traffic accidents becomes difficult. In this paper, Latent Class Cluster (LCC) is used as a preliminary tool for segmentation of 3229 accidents on rural highways in Granada (Spain) between 2005 and 2008. Next, Bayesian Networks (BNs) are used to identify the main factors involved in accident severity for both, the entire database (EDB) and the clusters previously obtained by LCC. The results of these cluster-based analyses are compared with the results of a full-data analysis. The results show that the combined use of both techniques is very interesting as it reveals further information that would not have been obtained without prior segmentation of the data. BN inference is used to obtain the variables that best identify accidents with killed or seriously injured. Accident type and sight distance have been identify in all the cases analysed; other variables such as time, occupant involved or age are identified in EDB and only in one cluster; whereas variables vehicles involved, number of injuries, atmospheric factors, pavement markings and pavement width are identified only in one cluster.

  4. Structural Analysis for the American Airlines Flight 587 Accident Investigation: Global Analysis

    NASA Technical Reports Server (NTRS)

    Young, Richard D.; Lovejoy, Andrew E.; Hilburger, Mark W.; Moore, David F.

    2005-01-01

    NASA Langley Research Center (LaRC) supported the National Transportation Safety Board (NTSB) in the American Airlines Flight 587 accident investigation due to LaRC's expertise in high-fidelity structural analysis and testing of composite structures and materials. A Global Analysis Team from LaRC reviewed the manufacturer s design and certification procedures, developed finite element models and conducted structural analyses, and participated jointly with the NTSB and Airbus in subcomponent tests conducted at Airbus in Hamburg, Germany. The Global Analysis Team identified no significant or obvious deficiencies in the Airbus certification and design methods. Analysis results from the LaRC team indicated that the most-likely failure scenario was failure initiation at the right rear main attachment fitting (lug), followed by an unstable progression of failure of all fin-to-fuselage attachments and separation of the VTP from the aircraft. Additionally, analysis results indicated that failure initiates at the final observed maximum fin loading condition in the accident, when the VTP was subjected to loads that were at minimum 1.92 times the design limit load condition for certification. For certification, the VTP is only required to support loads of 1.5 times design limit load without catastrophic failure. The maximum loading during the accident was shown to significantly exceed the certification requirement. Thus, the structure appeared to perform in a manner consistent with its design and certification, and failure is attributed to VTP loads greater than expected.

  5. Sensitivity analysis of radionuclides atmospheric dispersion following the Fukushima accident

    NASA Astrophysics Data System (ADS)

    Girard, Sylvain; Korsakissok, Irène; Mallet, Vivien

    2014-05-01

    Atmospheric dispersion models are used in response to accidental releases with two purposes: - minimising the population exposure during the accident; - complementing field measurements for the assessment of short and long term environmental and sanitary impacts. The predictions of these models are subject to considerable uncertainties of various origins. Notably, input data, such as meteorological fields or estimations of emitted quantities as function of time, are highly uncertain. The case studied here is the atmospheric release of radionuclides following the Fukushima Daiichi disaster. The model used in this study is Polyphemus/Polair3D, from which derives IRSN's operational long distance atmospheric dispersion model ldX. A sensitivity analysis was conducted in order to estimate the relative importance of a set of identified uncertainty sources. The complexity of this task was increased by four characteristics shared by most environmental models: - high dimensional inputs; - correlated inputs or inputs with complex structures; - high dimensional output; - multiplicity of purposes that require sophisticated and non-systematic post-processing of the output. The sensitivities of a set of outputs were estimated with the Morris screening method. The input ranking was highly dependent on the considered output. Yet, a few variables, such as horizontal diffusion coefficient or clouds thickness, were found to have a weak influence on most of them and could be discarded from further studies. The sensitivity analysis procedure was also applied to indicators of the model performance computed on a set of gamma dose rates observations. This original approach is of particular interest since observations could be used later to calibrate the input variables probability distributions. Indeed, only the variables that are influential on performance scores are likely to allow for calibration. An indicator based on emission peaks time matching was elaborated in order to complement

  6. Accident Analysis for the NIST Research Reactor Before and After Fuel Conversion

    SciTech Connect

    Baek J.; Diamond D.; Cuadra, A.; Hanson, A.L.; Cheng, L-Y.; Brown, N.R.

    2012-09-30

    Postulated accidents have been analyzed for the 20 MW D2O-moderated research reactor (NBSR) at the National Institute of Standards and Technology (NIST). The analysis has been carried out for the present core, which contains high enriched uranium (HEU) fuel and for a proposed equilibrium core with low enriched uranium (LEU) fuel. The analyses employ state-of-the-art calculational methods. Three-dimensional Monte Carlo neutron transport calculations were performed with the MCNPX code to determine homogenized fuel compositions in the lower and upper halves of each fuel element and to determine the resulting neutronic properties of the core. The accident analysis employed a model of the primary loop with the RELAP5 code. The model includes the primary pumps, shutdown pumps outlet valves, heat exchanger, fuel elements, and flow channels for both the six inner and twenty-four outer fuel elements. Evaluations were performed for the following accidents: (1) control rod withdrawal startup accident, (2) maximum reactivity insertion accident, (3) loss-of-flow accident resulting from loss of electrical power with an assumption of failure of shutdown cooling pumps, (4) loss-of-flow accident resulting from a primary pump seizure, and (5) loss-of-flow accident resulting from inadvertent throttling of a flow control valve. In addition, natural circulation cooling at low power operation was analyzed. The analysis shows that the conversion will not lead to significant changes in the safety analysis and the calculated minimum critical heat flux ratio and maximum clad temperature assure that there is adequate margin to fuel failure.

  7. Study of Benefits of Passenger Protective Breathing Equipment from Analysis of Past Accidents

    DTIC Science & Technology

    1988-03-01

    analysis of worldwide transport aircraft accidents involving fire. BACKGROUND. During a cabin fire, smoke and toxic gases may inhibit or prevent passenger...aviation industry focused upon smoke and toxic gases as causal factors of passenger incapacitation, resulting in failure to evacuate the aircraft before... gases . Protective breathing equipment (PBE) is being reevaluated in response to the United Kingdom’s (UK) Department of Transport’s Accident

  8. Advanced accident sequence precursor analysis level 2 models

    SciTech Connect

    Galyean, W.J.; Brownson, D.A.; Rempe, J.L.

    1996-03-01

    The U.S. Nuclear Regulatory Commission Accident Sequence Precursor program pursues the ultimate objective of performing risk significant evaluations on operational events (precursors) occurring in commercial nuclear power plants. To achieve this objective, the Office of Nuclear Regulatory Research is supporting the development of simple probabilistic risk assessment models for all commercial nuclear power plants (NPP) in the U.S. Presently, only simple Level 1 plant models have been developed which estimate core damage frequencies. In order to provide a true risk perspective, the consequences associated with postulated core damage accidents also need to be considered. With the objective of performing risk evaluations in an integrated and consistent manner, a linked event tree approach which propagates the front end results to back end was developed. This approach utilizes simple plant models that analyze the response of the NPP containment structure in the context of a core damage accident, estimate the magnitude and timing of a radioactive release to the environment, and calculate the consequences for a given release. Detailed models and results from previous studies, such as the NUREG-1150 study, are used to quantify these simple models. These simple models are then linked to the existing Level 1 models, and are evaluated using the SAPHIRE code. To demonstrate the approach, prototypic models have been developed for a boiling water reactor, Peach Bottom, and a pressurized water reactor, Zion.

  9. Accident sequence precursor analysis level 2/3 model development

    SciTech Connect

    Lui, C.H.; Galyean, W.J.; Brownson, D.A.

    1997-02-01

    The US Nuclear Regulatory Commission`s Accident Sequence Precursor (ASP) program currently uses simple Level 1 models to assess the conditional core damage probability for operational events occurring in commercial nuclear power plants (NPP). Since not all accident sequences leading to core damage will result in the same radiological consequences, it is necessary to develop simple Level 2/3 models that can be used to analyze the response of the NPP containment structure in the context of a core damage accident, estimate the magnitude of the resulting radioactive releases to the environment, and calculate the consequences associated with these releases. The simple Level 2/3 model development work was initiated in 1995, and several prototype models have been completed. Once developed, these simple Level 2/3 models are linked to the simple Level 1 models to provide risk perspectives for operational events. This paper describes the methods implemented for the development of these simple Level 2/3 ASP models, and the linkage process to the existing Level 1 models.

  10. Approaches to accident analysis in recent US Department of Energy environmental impact statements

    SciTech Connect

    Mueller, C.; Folga, S.; Nabelssi, B.

    1996-12-31

    A review of accident analyses in recent US Department of Energy (DOE) Environmental Impact Statements (EISs) was conducted to evaluate the consistency among approaches and to compare these approaches with existing DOE guidance. The review considered several components of an accident analysis: the overall scope, which in turn should reflect the scope of the EIS; the spectrum of accidents considered; the methods and assumptions used to determine frequencies or frequency ranges for the accident sequences; and the assumption and technical bases for developing radiological and chemical atmospheric source terms and for calculating the consequences of airborne releases. The review also considered the range of results generated with respect to impacts on various worker and general populations. In this paper, the findings of these reviews are presented and methods recommended for improving consistency among EISs and bringing them more into line with existing DOE guidance.

  11. Analysis of the TMI-2 source range monitor during the TMI (Three Mile Island) accident

    SciTech Connect

    Wu, Horng-Yu; Baratta, A.J.; Hsiao, Ming-Yuan; Bandini, B.R.

    1987-06-01

    The source range monitor (SRM) data recorded during the first 4 hours of the Three Mile Island Unit No. 2 (TMI-2) accident following reactor shutdown were analyzed. An effort to simulate the actual SRM response was made by performing a series of neutron transport calculations. Primary emphasis was placed on simulating the changes in SRM response to various system events during the accident, so as to obtain useful information about core conditions at the various stages. Based on the known end-state reactor conditions, the major system events, and the acutal SRM readings, self-consistent estimates were made of core liquid level, void fraction in the coolant, and locations of core materials. This analysis expands the possible interpretation of the SRM data relative to core damage progression. The results appear to be consistent with other studies of the TMI-2 Accident Evaluation Program, and provide information useful for the developemnt and determination of the TMI-2 accident scenario.

  12. RBMK Safety Analysis in Accidents Initiated by Partial Ruptures of the Circulation Circuit

    SciTech Connect

    Dostov, Anatoly I.; Kramerov, Alexander Ja.

    2002-07-01

    The paper gives an analysis of the current state of the RBMK safety evaluation in accidents initiated by partial ruptures of the delivery part of the circulating loop. It appears from this analysis that applicability and uncertainty of the international code RELAP for RBMK safety analysis could not be determined up to the present. At the same time it is shown in the paper that fuel rod cladding temperature can reach the acceptability criterion in the accidents. As a result it has been concluded that bases of the next stage of the RBMK safety analysis would be creation of a code oriented to the special features of a reactor RBMK. (authors)

  13. [Fatal skiing accidents: a forensic analysis taking the example of Salzburg].

    PubMed

    Kunz, Sebastian N; Keller, Thomas; Grove, Christina; Lochner, Stefanie; Monticelli, Fabio

    2015-01-01

    The rising popularity of Alpine skiing in recent years has led to an increase of skiing accidents, some with fatal outcome. In this paper, all fatal skiing accidents from the autopsy material of the Institute of Forensic Medicine of the Paris Lodron University Salzburg were evaluated and compared with statistical data of the Alpine Police. In the wintertime of 2005/2006 until 2013/2014, 22 deadly skiing accidents were autopsied. The age of the male and female victims ranged between 12 and 71 years. The main cause of death was craniocerebral and chest trauma. A relevant blood alcohol concentration was detected in only one case. Together with trauma-biomechanical and technical experts, forensic medicine serves as a necessary clarification interface between the investigating authorities and the judiciary. Determining the cause and manner of death as well as reconstructing the accident is the main task of the forensic pathologist. The present study shows that in the county of Salzburg, only a small percentage of fatal skiing accidents is evaluated from a forensic and trauma-biomechanical point of view. Thus the possibilities of an interdisciplinary accident analysis are not always fully utilized.

  14. Indonesian railway accidents--utilizing Human Factors Analysis and Classification System in determining potential contributing factors.

    PubMed

    Iridiastadi, Hardianto; Ikatrinasari, Zulfa Fitri

    2012-01-01

    The prevalence of Indonesian railway accidents has not been declining, with hundreds of fatalities reported in the past decade. As an effort to help the National Transportation Safety Committee (NTSC), this study was conducted that aimed at understanding factors that might have contributed to the accidents. Human Factors Analysis and Classification System (HFACS) was utilized for this purpose. A total of nine accident reports (provided by the Indonesian NTSC) involving fatalities were studied using the technique. Results of this study indicated 72 factors that were closely related to the accidents. Of these, roughly 22% were considered as operator acts while about 39% were related to preconditions for operator acts. Supervisory represented 14% of the factors, and the remaining (about 25%) were associated with organizational factors. It was concluded that, while train drivers indeed played an important role in the accidents, interventions solely directed toward train drivers may not be adequate. A more comprehensive approach in minimizing the accidents should be conducted that addresses all the four aspects of HFACS.

  15. Risk-based Analysis of Construction Accidents in Iran During 2007-2011-Meta Analyze Study

    PubMed Central

    AMIRI, Mehran; ARDESHIR, Abdollah; FAZEL ZARANDI, Mohammad Hossein

    2014-01-01

    Abstract Background The present study aimed to investigate the characteristics of occupational accidents and frequency and severity of work related accidents in the construction industry among Iranian insured workers during the years 20072011. Methods The Iranian Social Security Organization (ISSO) accident database containing 21,864 cases between the years 2007-2011 was applied in this study. In the next step, Total Accident Rate (TRA), Total Severity Index (TSI), and Risk Factor (RF) were defined. The core of this work is devoted to analyzing the data from different perspectives such as age of workers, occupation and construction phase, day of the week, time of the day, seasonal analysis, regional considerations, type of accident, and body parts affected. Results Workers between 15-19 years old (TAR=13.4%) are almost six times more exposed to risk of accident than the average of all ages (TAR=2.51%). Laborers and structural workers (TAR=66.6%) and those working at heights (TAR=47.2%) experience more accidents than other groups of workers. Moreover, older workers over 65 years old (TSI=1.97%> average TSI=1.60%), work supervisors (TSI=12.20% >average TSI=9.09%), and night shift workers (TSI=1.89% >average TSI=1.47%) are more prone to severe accidents. Conclusion It is recommended that laborers, young workers, weekend and night shift workers be supervised more carefully in the workplace. Use of Personal Protective Equipment (PPE) should be compulsory in working environments, and special attention should be undertaken to people working outdoors and at heights. It is also suggested that policymakers pay more attention to the improvement of safety conditions in deprived and cold western regions. PMID:26005662

  16. Section traumatique de l'utérus non gravide chez une accidentée de voie publique: à propos d'un cas

    PubMed Central

    Cédrick, Sangwa Milindi; Marius, Kitembo Feruzi; Mireille, Kakinga Zabibu; Nelly, Mukonda Sompo; Chamy, Cham Lubamba; Numbi, Kabamge; Mutomb, Jean Felix

    2015-01-01

    Dans cet article les auteurs rapportent un rare cas de section traumatique d'un utérus non gravide, chez une accidentée de voie publique reçu dans un tableau d'hemopéritoine aux services des urgences de l'hôpital General Provincial de Reference Jason Sendwe. PMID:26113916

  17. 3W Analysis of FY 78 Army Aircraft Accidents.

    DTIC Science & Technology

    1979-05-01

    Callen, J. R., "Pilot Error Accidents Aren’t All Pilot," United States Army Agency for Aviation Safety, May 1975. 25 ~ ~ - APPENDICES 27 til - -1P I If 2...LJSASC-TR-79- ML DIS RII3UMUN STATZLIA USASC TECHNICAL REPORT Approved fox public releaqw TR 79.3 Ana Iyss Of FY78 704Acidents. A.L:fM ;what happened...construed as an official Department of the Army position, policy , or decision, unless so designated by other official authority. The findings of this

  18. [Comparative analysis of the radionuclide composition in fallout after the Chernobyl and the Fukushima accidents].

    PubMed

    Kotenko, K V; Shinkarev, S M; Abramov, Iu V; Granovskaia, E O; Iatsenko, V N; Gavrilin, Iu I; Margulis, U Ia; Garetskaia, O S; Imanaka, T; Khoshi, M

    2012-01-01

    The nuclear accident occurred at Fukushima Dai-ichi Nuclear Power Plant (NPP) (March 11, 2011) similarly to the accident at the Chernobyl NPP (April 26, 1986) is related to the level 7 of the INES. It is of interest to make an analysis of the radionuclide composition of the fallout following the both accidents. The results of the spectrometric measurements were used in that comparative analysis. Two areas following the Chernobyl accident were considered: (1) the near zone of the fallout - the Belarusian part of the central spot extended up to 60 km around the Chernobyl NPS and (2) the far zone of the fallout--the "Gomel-Mogilev" spot centered 200 km to the north-northeast of the damaged reactor. In the case of Fukushima accident the near zone up to about 60 km considered. The comparative analysis has been done with respect to refractory radionuclides (95Zr, 95Nb, 141Ce, 144Ce), as well as to the intermediate and volatile radionuclides 103Ru, 106Ru, 131I, 134Cs, 137Cs, 140La, 140Ba and the results of such a comparison have been discussed. With respect to exposure to the public the most important radionuclides are 131I and 137Cs. For the both accidents the ratios of 131I/137Cs in the considered soil samples are in the similar ranges: (3-50) for the Chernobyl samples and (5-70) for the Fukushima samples. Similarly to the Chernobyl accident a clear tendency that the ratio of 131I/137Cs in the fallout decreases with the increase of the ground deposition density of 137Cs within the trace related to a radioactive cloud has been identified for the Fukushima accident. It looks like this is a universal tendency for the ratio of 131I/137Cs versus the 137Cs ground deposition density in the fallout along the trace of a radioactive cloud as a result of a heavy accident at the NPP with radionuclides releases into the environment. This tendency is important for an objective reconstruction of 131I fallout based on the results of 137Cs measurements of soil samples carried out at

  19. Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

    PubMed Central

    Dźwiarek, Marek; Latała, Agata

    2016-01-01

    This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc. PMID:26652689

  20. Analysis of hospitalization occurred due to motorcycles accidents in São Paulo city

    PubMed Central

    Gorios, Carlos; Armond, Jane de Eston; Rodrigues, Cintia Leci; Pernambuco, Henrique; Iporre, Ramiro Ortiz; Colombo-Souza, Patrícia

    2015-01-01

    OBJECTIVE: To characterize the motorcycle accidents occurred in the city of São Paulo, SP, Brazil in the year 2013, with emphasis on information about hospital admissions from SIH/SUS. METHODS: This is a retrospective cross-sectional study. The study covered 5,597 motorcyclists traumatized in traffic accident during the year 2013 occurred in the city of São Paulo. A survey was conducted using secondary data from the Information System of Hospitalization Health System (SIH/SUS). RESULTS: In 2013, in the city of São Paulo there were 5,597 admissions of motorcyclists traumatized in traffic accidents, of which 89.8% were male. The admission diagnosis were: leg fracture, femur fracture, and intracranial injury. CONCLUSION: This study confirms other preliminary studies on several points, among which stands out the highest prevalence of male young adults. Level of Evidence II, Retrospective Study. PMID:26327804

  1. [Model of Analysis and Prevention of Accidents - MAPA: tool for operational health surveillance].

    PubMed

    de Almeida, Ildeberto Muniz; Vilela, Rodolfo Andrade de Gouveia; da Silva, Alessandro José Nunes; Beltran, Sandra Lorena

    2014-12-01

    The analysis of work-related accidents is important for accident surveillance and prevention. Current methods of analysis seek to overcome reductionist views that see these occurrences as simple events explained by operator error. The objective of this paper is to analyze the Model of Analysis and Prevention of Accidents (MAPA) and its use in monitoring interventions, duly highlighting aspects experienced in the use of the tool. The descriptive analytical method was used, introducing the steps of the model. To illustrate contributions and or difficulties, cases where the tool was used in the context of service were selected. MAPA integrates theoretical approaches that have already been tried in studies of accidents by providing useful conceptual support from the data collection stage until conclusion and intervention stages. Besides revealing weaknesses of the traditional approach, it helps identify organizational determinants, such as management failings, system design and safety management involved in the accident. The main challenges lie in the grasp of concepts by users, in exploring organizational aspects upstream in the chain of decisions or at higher levels of the hierarchy, as well as the intervention to change the determinants of these events.

  2. MELCOR code analysis of a severe accident LOCA at Peach Bottom Plant

    SciTech Connect

    Carbajo, J.J. )

    1993-01-01

    A design-basis loss-of-coolant accident (LOCA) concurrent with complete loss of the emergency core cooling systems (ECCSs) has been analyzed for the Peach Bottom atomic station unit 2 using the MELCOR code, version 1.8.1. The purpose of this analysis is to calculate best-estimate times for the important events of this accident sequence and best-estimate source terms. Calculated pressures and temperatures at the beginning of the transient have been compared to results from the Peach Bottom final safety analysis report (FSAR). MELCOR-calculated source terms have been compared to source terms reported in the NUREG-1465 draft.

  3. Risk of Occupational Accidents in Workers with Obstructive Sleep Apnea: Systematic Review and Meta-analysis

    PubMed Central

    Garbarino, Sergio; Guglielmi, Ottavia; Sanna, Antonio; Mancardi, Gian Luigi; Magnavita, Nicola

    2016-01-01

    Study Objectives: Obstructive sleep apnea (OSA) is the single most important preventable medical cause of excessive daytime sleepiness (EDS) and driving accidents. OSA may also adversely affect work performance through a decrease in productivity, and an increase in the injury rate. Nevertheless, no systematic review and meta-analysis of the relationship between OSA and work accidents has been performed thus far. Methods: PubMed, PsycInfo, Scopus, Web of Science, and Cochrane Library were searched. Out of an initial list of 1,099 papers, 10 studies (12,553 participants) were eligible for our review, and 7 of them were included in the meta-analysis. The overall effects were measured by odds ratios (OR) and 95% confidence intervals (CI). An assessment was made of the methodological quality of the studies. Moderator analysis and funnel plot analysis were used to explore the sources of between-study heterogeneity. Results: Compared to controls, the odds of work accident was found to be nearly double in workers with OSA (OR = 2.18; 95% CI = 1.53–3.10). Occupational driving was associated with a higher effect size. Conclusions: OSA is an underdiagnosed nonoccupational disease that has a strong adverse effect on work accidents. The nearly twofold increased odds of work accidents in subjects with OSA calls for workplace screening in selected safety-sensitive occupations. Commentary: A commentary on this article appears in this issue on page 1171. Citation: Garbarino S, Guglielmi O, Sanna A, Mancardi GL, Magnavita N. Risk of occupational accidents in workers with obstructive sleep apnea: systematic review and meta-analysis. SLEEP 2016;39(6):1211–1218. PMID:26951401

  4. Accident analysis of railway transportation of low-level radioactive and hazardous chemical wastes: Application of the /open quotes/Maximum Credible Accident/close quotes/ concept

    SciTech Connect

    Ricci, E.; McLean, R.B.

    1988-09-01

    The maximum credible accident (MCA) approach to accident analysis places an upper bound on the potential adverse effects of a proposed action by using conservative but simplifying assumptions. It is often used when data are lacking to support a more realistic scenario or when MCA calculations result in acceptable consequences. The MCA approach can also be combined with realistic scenarios to assess potential adverse effects. This report presents a guide for the preparation of transportation accident analyses based on the use of the MCA concept. Rail transportation of contaminated wastes is used as an example. The example is the analysis of the environmental impact of the potential derailment of a train transporting a large shipment of wastes. The shipment is assumed to be contaminated with polychlorinated biphenyls and low-level radioactivities of uranium and technetium. The train is assumed to plunge into a river used as a source of drinking water. The conclusions from the example accident analysis are based on the calculation of the number of foreseeable premature cancer deaths the might result as a consequence of this accident. These calculations are presented, and the reference material forming the basis for all assumptions and calculations is also provided.

  5. Synthesis of quantitative and qualitative evidence for accident analysis in risk-based highway planning.

    PubMed

    Lambert, James H; Peterson, Kenneth D; Joshi, Nilesh N

    2006-09-01

    Accident analysis involves the use of both quantitative and qualitative data in decision-making. The aim of this paper is to demonstrate the synthesis of relevant quantitative and qualitative evidence for accident analysis and for planning a large and diverse portfolio of highway investment projects. The proposed analysis and visualization techniques along with traditional mathematical modeling serve as an aid to planners, engineers, and the public in comparing the benefits of current and proposed improvement projects. The analysis uses data on crash rates, average daily traffic, cost estimates from highway agency databases, and project portfolios for regions and localities. It also utilizes up to two motivations out of seven that are outlined in the Transportation Equity Act for the 21st Century (TEA-21). Three case studies demonstrate the risk-based approach to accident analysis for short- and long-range transportation plans. The approach is adaptable to other topics in accident analysis and prevention that involve the use of quantitative and qualitative evidence, risk analysis, and multi-criteria decision-making for project portfolio selection.

  6. RELAP5 Application to Accident Analysis of the NIST Research Reactor

    SciTech Connect

    Baek, J.; Cuadra Gascon, A.; Cheng, L.Y.; Diamond, D.

    2012-03-18

    Detailed safety analyses have been performed for the 20 MW D{sub 2}O moderated research reactor (NBSR) at the National Institute of Standards and Technology (NIST). The time-dependent analysis of the primary system is determined with a RELAP5 transient analysis model that includes the reactor vessel, the pump, heat exchanger, fuel element geometry, and flow channels for both the six inner and twenty-four outer fuel elements. A post-processing of the simulation results has been conducted to evaluate minimum critical heat flux ratio (CHFR) using the Sudo-Kaminaga correlation. Evaluations are performed for the following accidents: (1) the control rod withdrawal startup accident and (2) the maximum reactivity insertion accident. In both cases the RELAP5 results indicate that there is adequate margin to CHF and no damage to the fuel will occur because of sufficient coolant flow through the fuel channels and the negative scram reactivity insertion.

  7. Radioactivity analysis following the Fukushima Dai-ichi nuclear accident.

    PubMed

    Tuo, Fei; Xu, Cuihua; Zhang, Jing; Zhou, Qiang; Li, Wenhong; Zhao, Li; Zhang, Qing; Zhang, Jianfeng; Su, Xu

    2013-08-01

    A total of 118 samples were analyzed using HPGe γ-spectrometry. (131)I, (134)Cs, (137)Cs and (136)Cs were detected in aerosol air samples that were collected 22 days after the accident with values of 1720 µBq m(-)³, 247 µBq m(-)³, 289 µBq m(-)³ and 23 µBq m(-)³, respectively. (131)I was detected in rainwater and soil samples and was also measurable in vegetables collected between April 2 and 13, 2011, with values ranging from 0.55 Bq kg(-1) to 2.68 Bq kg(-1). No (131)I was detected in milk, drinking water, seawater or marine biota samples.

  8. Analysis of fission product release behavior during the TMI-2 accident

    SciTech Connect

    Petti, D. A.; Adams, J. P.; Anderson, J. L.; Hobbins, R. R.

    1987-01-01

    An analysis of fission product release during the Three Mile Island Unit 2 (TMI-2) accident has been initiated to provide an understanding of fission product behavior that is consistent with both the best estimate accident scenario and fission product results from the ongoing sample acquisition and examination efforts. ''First principles'' fission product release models are used to describe release from intact, disrupted, and molten fuel. Conclusions relating to fission product release, transport, and chemical form are drawn. 35 refs., 12 figs., 7 tabs.

  9. Calculation and analysis of the cause of the collapse accident to a bridge

    NASA Astrophysics Data System (ADS)

    Zhao, Zhanshan; Wu, Longfei; Zhang, Yijing

    2017-03-01

    The causes of the collapse accident of the steel tube scaffold are summarized and analyzed. Combined with practical engineering, the cause of the bridge collapse was analyzed from construction management, raw materials, fastener mechanics performance and stability calculation, which provides a reference for practical engineering analysis, and puts forward related suggestions.

  10. A systemic analysis of South Korea Sewol ferry accident - Striking a balance between learning and accountability.

    PubMed

    Kee, Dohyung; Jun, Gyuchan Thomas; Waterson, Patrick; Haslam, Roger

    2017-03-01

    The South Korea Sewol ferry accident in April 2014 claimed the lives of over 300 passengers and led to criminal charges of 399 personnel concerned including imprisonment of 154 of them as of Oct 2014. Blame and punishment culture can be prevalent in a more hierarchical society like South Korea as shown in the aftermath of this disaster. This study aims to analyse the South Korea ferry accident using Rasmussen's risk management framework and the associated AcciMap technique and to propose recommendations drawn from an AcciMap-based focus group with systems safety experts. The data for the accident analysis were collected mainly from an interim investigation report by the Board of Audit and Inspection of Korea and major South Korean and foreign newspapers. The analysis showed that the accident was attributed to many contributing factors arising from front-line operators, management, regulators and government. It also showed how the multiple factors including economic, social and political pressures and individual workload contributed to the accident and how they affected each other. This AcciMap was presented to 27 safety researchers and experts at 'the legacy of Jens Rasmussen' symposium adjunct to ODAM2014. Their recommendations were captured through a focus group. The four main recommendations include forgive (no blame and punishment on individuals), analyse (socio-technical system-based), learn (from why things do not go wrong) and change (bottom-up safety culture and safety system management). The findings offer important insights into how this type of accident should be understood, analysed and the subsequent response.

  11. Preliminary Analysis of Aircraft Loss of Control Accidents: Worst Case Precursor Combinations and Temporal Sequencing

    NASA Technical Reports Server (NTRS)

    Belcastro, Christine M.; Groff, Loren; Newman, Richard L.; Foster, John V.; Crider, Dennis H.; Klyde, David H.; Huston, A. McCall

    2014-01-01

    Aircraft loss of control (LOC) is a leading cause of fatal accidents across all transport airplane and operational classes, and can result from a wide spectrum of hazards, often occurring in combination. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of conditions and uncertainties, including multiple hazards, and their validation must provide a means of assessing system effectiveness and coverage of these hazards. This requires the definition of a comprehensive set of LOC test scenarios based on accident and incident data as well as future risks. This paper defines a comprehensive set of accidents and incidents over a recent 15 year period, and presents preliminary analysis results to identify worst-case combinations of causal and contributing factors (i.e., accident precursors) and how they sequence in time. Such analyses can provide insight in developing effective solutions for LOC, and form the basis for developing test scenarios that can be used in evaluating them. Preliminary findings based on the results of this paper indicate that system failures or malfunctions, crew actions or inactions, vehicle impairment conditions, and vehicle upsets contributed the most to accidents and fatalities, followed by inclement weather or atmospheric disturbances and poor visibility. Follow-on research will include finalizing the analysis through a team consensus process, defining future risks, and developing a comprehensive set of test scenarios with correlation to the accidents, incidents, and future risks. Since enhanced engineering simulations are required for batch and piloted evaluations under realistic LOC precursor conditions, these test scenarios can also serve as a high-level requirement for defining the engineering simulation enhancements needed for generating them.

  12. The effects on accidents of studded tires and laws banning their use: a meta-analysis of evaluation studies.

    PubMed

    Elvik, R

    1999-01-01

    Studies that have evaluated the effects on accidents of studded tires are reviewed. There are two types of evaluation studies with respect to the safety effects of studded tires: (1) Studies of the effect on automobile accident rates of using studded tires; and (2) studies of the effect on accidents of banning the use of studded tires. The results of studies of the effects of studded tires on automobile accident rates are found to vary substantially, depending on the quality of the study design. Recent studies employing multivariate techniques of analysis to control for confounding factors, attribute to studded tires minor declines in automobile accident rates of 5% for snow- or ice-covered roads, 2% for bare roads and 4% for all road surfaces combined. The results of these studies are consistent with the most recent estimates of the effect on accidents of banning studded tires. It is concluded that studded tires probably confer a slight safety benefit during wintertime.

  13. Analysis of dental materials as an aid to identification in aircraft accidents.

    PubMed

    Wilson, G S; Cruickshanks-Boyd, D W

    1982-04-01

    The failure to achieve positive identification of aircrew following an aircraft accident need not prevent a full autopsy and toxicological examination to ascertain possible medical factors involved in the accident. Energy-dispersive electron microprobe analysis provides morphological, qualitative, and accurate quantitative analysis of the composition of dental amalgam. Wet chemical analysis can be used to determine the elemental composition of crowns, bridges and partial dentures. Unfilled resin can be analyzed by infrared spectroscopy. Detailed analysis of filled composite restorative resins has not yet been achieved in the "as-set" condition to permit discrimination between manufacturers' products. Future work will involve filler studies and pyrolysis of the composite resins by thermogravimetric analysis to determine percentage weight loss when the sample examined is subjected to a controlled heating regime. With these available techniques, corroborative evidence achieved from the scientific study of materials can augment standard forensic dental results to obtain a positive identification.

  14. Analysis of dental materials as an aid to identification in aircraft accidents

    SciTech Connect

    Wilson, G.S.; Cruickshanks-Boyd, D.W.

    1982-04-01

    The failure to achieve positive identification of aircrew following an aircraft accident need not prevent a full autopsy and toxicological examination to ascertain possible medical factors involved in the accident. Energy-dispersive electron microprobe analysis provides morphological, qualitative, and accurate quantitative analysis of the composition of dental amalgam. Wet chemical analysis can be used to determine the elemental composition of crowns, bridges and partial dentures. Unfilled resin can be analyzed by infrared spectroscopy. Detailed analysis of filled composite restorative resins has not yet been achieved in the as-set condition to permit discrimination between manufacturers' products. Future work will involve filler studies and pyrolysis of the composite resins by thermogravimetric analysis to determine percentage weight loss when the sample examined is subjected to a controlled heating regime. With these available techniques, corroborative evidence achieved from the scientific study of materials can augment standard forensic dental results to obtain a positive identification.

  15. SAMPSON Parallel Computation for Sensitivity Analysis of TEPCO's Fukushima Daiichi Nuclear Power Plant Accident

    NASA Astrophysics Data System (ADS)

    Pellegrini, M.; Bautista Gomez, L.; Maruyama, N.; Naitoh, M.; Matsuoka, S.; Cappello, F.

    2014-06-01

    On March 11th 2011 a high magnitude earthquake and consequent tsunami struck the east coast of Japan, resulting in a nuclear accident unprecedented in time and extents. After scram started at all power stations affected by the earthquake, diesel generators began operation as designed until tsunami waves reached the power plants located on the east coast. This had a catastrophic impact on the availability of plant safety systems at TEPCO's Fukushima Daiichi, leading to the condition of station black-out from unit 1 to 3. In this article the accident scenario is studied with the SAMPSON code. SAMPSON is a severe accident computer code composed of hierarchical modules to account for the diverse physics involved in the various phases of the accident evolution. A preliminary parallelization analysis of the code was performed using state-of-the-art tools and we demonstrate how this work can be beneficial to the nuclear safety analysis. This paper shows that inter-module parallelization can reduce the time to solution by more than 20%. Furthermore, the parallel code was applied to a sensitivity study for the alternative water injection into TEPCO's Fukushima Daiichi unit 3. Results show that the core melting progression is extremely sensitive to the amount and timing of water injection, resulting in a high probability of partial core melting for unit 3.

  16. Uncertainty and sensitivity analysis of food pathway results with the MACCS Reactor Accident Consequence Model

    SciTech Connect

    Helton, J.C.; Johnson, J.D.; Rollstin, J.A.; Shiver, A.W.; Sprung, J.L.

    1995-01-01

    Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis are used in an investigation with the MACCS model of the food pathways associated with a severe accident at a nuclear power station. The primary purpose of this study is to provide guidance on the variables to be considered in future review work to reduce the uncertainty in the important variables used in the calculation of reactor accident consequences. The effects of 87 imprecisely-known input variables on the following reactor accident consequences are studied: crop growing season dose, crop long-term dose, milk growing season dose, total food pathways dose, total ingestion pathways dose, total long-term pathways dose, area dependent cost, crop disposal cost, milk disposal cost, condemnation area, crop disposal area and milk disposal area. When the predicted variables are considered collectively, the following input variables were found to be the dominant contributors to uncertainty: fraction of cesium deposition on grain fields that is retained on plant surfaces and transferred directly to grain, maximum allowable ground concentrations of Cs-137 and Sr-90 for production of crops, ground concentrations of Cs-134, Cs-137 and I-131 at which the disposal of milk will be initiated due to accidents that occur during the growing season, ground concentrations of Cs-134, I-131 and Sr-90 at which the disposal of crops will be initiated due to accidents that occur during the growing season, rate of depletion of Cs-137 and Sr-90 from the root zone, transfer of Sr-90 from soil to legumes, transfer of Cs-137 from soil to pasture, transfer of cesium from animal feed to meat, and the transfer of cesium, iodine and strontium from animal feed to milk.

  17. Implementation of numerical simulation techniques in analysis of the accidents in complex technological systems

    SciTech Connect

    Klishin, G.S.; Seleznev, V.E.; Aleoshin, V.V.

    1997-12-31

    Gas industry enterprises such as main pipelines, compressor gas transfer stations, gas extracting complexes belong to the energy intensive industry. Accidents there can result into the catastrophes and great social, environmental and economic losses. Annually, according to the official data several dozens of large accidents take place at the pipes in the USA and Russia. That is why prevention of the accidents, analysis of the mechanisms of their development and prediction of their possible consequences are acute and important tasks nowadays. The accidents reasons are usually of a complicated character and can be presented as a complex combination of natural, technical and human factors. Mathematical and computer simulations are safe, rather effective and comparatively inexpensive methods of the accident analysis. It makes it possible to analyze different mechanisms of a failure occurrence and development, to assess its consequences and give recommendations to prevent it. Besides investigation of the failure cases, numerical simulation techniques play an important role in the treatment of the diagnostics results of the objects and in further construction of mathematical prognostic simulations of the object behavior in the period of time between two inspections. While solving diagnostics tasks and in the analysis of the failure cases, the techniques of theoretical mechanics, of qualitative theory of different equations, of mechanics of a continuous medium, of chemical macro-kinetics and optimizing techniques are implemented in the Conversion Design Bureau {number_sign}5 (DB{number_sign}5). Both universal and special numerical techniques and software (SW) are being developed in DB{number_sign}5 for solution of such tasks. Almost all of them are calibrated on the calculations of the simulated and full-scale experiments performed at the VNIIEF and MINATOM testing sites. It is worth noting that in the long years of work there has been established a fruitful and effective

  18. Analysis of the FeCrAl Accident Tolerant Fuel Concept Benefits during BWR Station Blackout Accidents

    SciTech Connect

    Robb, Kevin R

    2015-01-01

    Iron-chromium-aluminum (FeCrAl) alloys are being considered for fuel concepts with enhanced accident tolerance. FeCrAl alloys have very slow oxidation kinetics and good strength at high temperatures. FeCrAl could be used for fuel cladding in light water reactors and/or as channel box material in boiling water reactors (BWRs). To estimate the potential safety gains afforded by the FeCrAl concept, the MELCOR code was used to analyze a range of postulated station blackout severe accident scenarios in a BWR/4 reactor employing FeCrAl. The simulations utilize the most recently known thermophysical properties and oxidation kinetics for FeCrAl. Overall, when compared to the traditional Zircaloy-based cladding and channel box, the FeCrAl concept provides a few extra hours of time for operators to take mitigating actions and/or for evacuations to take place. A coolable core geometry is retained longer, enhancing the ability to stabilize an accident. Finally, due to the slower oxidation kinetics, substantially less hydrogen is generated, and the generation is delayed in time. This decreases the amount of non-condensable gases in containment and the potential for deflagrations to inhibit the accident response.

  19. [Analysis of radiation-hygienic and medical consequences of the Chernobyl accident].

    PubMed

    Onishchenko, G G

    2013-01-01

    Since the day of "the Chernobyl accident" in 1986 more than 25 years have been past. Radioactively contaminated areas 14 subjects of the Russian Federation with a total area of more than 50 thousand km2, where 1.5 million people now reside were exposed to radioactive contamination. Currently, a system of comprehensive evaluation of radiation doses of the population affected by the "Chernobyl accidents", including 11 guidance documents has been created. There are methodically provided works on the assessment of average annual, accumulated and predicted radiation doses of population and its critical groups, as well as doses to the thyroid gland The relevance of the analysis of the consequences of the "Chernobyl accident" is demonstrated by the events in Japan, at nuclear power Fukusima-1. In 2011 - 20/2 there were carried out comprehensive maritime expeditions under the auspices of the Russian Geographical Society with the participation of relevant ministries and agencies, leading academic institutions in Russia. In 2012, work was carried out on radiation protection of the population from the potential transboundary impact of the accident at the Japanese nuclear power plant Fukushima-l. The results provide a basis for the favorable outlook for the radiation environment in our Far East and the Pacific coast of Russia.

  20. Non-traumatic rupture of the intracranial vertebral artery of a man found dead in a severe car accident - histopathological differentiation by step-serial sections.

    PubMed

    Ro, Ayako; Kageyama, Norimasa; Hayashi, Kino; Shigeta, Akio; Fukunaga, Tatsushige

    2008-03-01

    A 58-year-old male with untreated hypertension was found dead in his car after a traffic accident on his way to the office. Emergency head CT showed diffuse subarachnoid hemorrhage at cerebral base. On autopsy examination, traumatic injuries were seen on his face and lower extremities. The skull was not fractured and there were no brain contusions except subscalp bleeding at the frontal head. The brain weighed 1510g and showed diffuse subarachnoid hemorrhage due to a rupture of the left vertebral artery (VA). Histopathological examination using serial step sections of every 0.1mm of the whole VA revealed multiple arterial dissections (AD) with fresh and old states at bilateral VA. Previous dissections at the basilar artery and internal carotid artery were also observed. The symptoms that he reported a week before the accident, left sided headache and shoulder pains, could have come from previous dissections. We concluded that the AD occurred while driving and was the cause of death, with the car accident then being caused by the stroke. Other specific histopathological findings were medial degeneration and serrate changes of the internal elastic lamina which resembled lesion of the segmental arterial mediolysis. These would suggest a pathogenesis of intracranial AD. Differential diagnosis of subarachnoid hemorrhage from the ruptured VA, distinguishing between idiopathic AD and traumatic trilaminar rupture, is still a difficult matter in forensic autopsy. However, this serial step sections procedure could be useful for the morphological differentiation.

  1. A flammability and combustion model for integrated accident analysis. [Advanced light water reactors

    SciTech Connect

    Plys, M.G.; Astleford, R.D.; Epstein, M. )

    1988-01-01

    A model for flammability characteristics and combustion of hydrogen and carbon monoxide mixtures is presented for application to severe accident analysis of Advanced Light Water Reactors (ALWR's). Flammability of general mixtures for thermodynamic conditions anticipated during a severe accident is quantified with a new correlation technique applied to data for several fuel and inertant mixtures and using accepted methods for combining these data. Combustion behavior is quantified by a mechanistic model consisting of a continuity and momentum balance for the burned gases, and considering an uncertainty parameter to match the idealized process to experiment. Benchmarks against experiment demonstrate the validity of this approach for a single recommended value of the flame flux multiplier parameter. The models presented here are equally applicable to analysis of current LWR's. 21 refs., 16 figs., 6 tabs.

  2. Coupled thermal analysis applied to the study of the rod ejection accident

    SciTech Connect

    Gonnet, M.

    2012-07-01

    An advanced methodology for the assessment of fuel-rod thermal margins under RIA conditions has been developed by AREVA NP SAS. With the emergence of RIA analytical criteria, the study of the Rod Ejection Accident (REA) would normally require the analysis of each fuel rod, slice by slice, over the whole core. Up to now the strategy used to overcome this difficulty has been to perform separate analyses of sampled fuel pins with conservative hypotheses for thermal properties and boundary conditions. In the advanced methodology, the evaluation model for the Rod Ejection Accident (REA) integrates the node average fuel and coolant properties calculation for neutron feedback purpose as well as the peak fuel and coolant time-dependent properties for criteria checking. The calculation grid for peak fuel and coolant properties can be specified from the assembly pitch down to the cell pitch. The comparative analysis of methodologies shows that coupled methodology allows reducing excessive conservatism of the uncoupled approach. (authors)

  3. Human and organisational factors in maritime accidents: analysis of collisions at sea using the HFACS.

    PubMed

    Chauvin, Christine; Lardjane, Salim; Morel, Gaël; Clostermann, Jean-Pierre; Langard, Benoît

    2013-10-01

    Over the last decade, the shipping industry has implemented a number of measures aimed at improving its safety level (such as new regulations or new forms of team training). Despite this evolution, shipping accidents, and particularly collisions, remain a major concern. This paper presents a modified version of the Human Factors Analysis and Classification System, which has been adapted to the maritime context and used to analyse human and organisational factors in collisions reported by the Marine Accident and Investigation Branch (UK) and the Transportation Safety Board (Canada). The analysis shows that most collisions are due to decision errors. At the precondition level, it highlights the importance of the following factors: poor visibility and misuse of instruments (environmental factors), loss of situation awareness or deficit of attention (conditions of operators), deficits in inter-ship communications or Bridge Resource Management (personnel factors). At the leadership level, the analysis reveals the frequent planning of inappropriate operations and non-compliance with the Safety Management System (SMS). The Multiple Accident Analysis provides an important finding concerning three classes of accidents. Inter-ship communications problems and Bridge Resource Management deficiencies are closely linked to collisions occurring in restricted waters and involving pilot-carrying vessels. Another class of collisions is associated with situations of poor visibility, in open sea, and shows deficiencies at every level of the socio-technical system (technical environment, condition of operators, leadership level, and organisational level). The third class is characterised by non-compliance with the SMS. This study shows the importance of Bridge Resource Management for situations of navigation with a pilot on board in restricted waters. It also points out the necessity to investigate, for situations of navigation in open sea, the masters' decisions in critical conditions

  4. Human Error and Commercial Aviation Accidents: A Comprehensive, Fine-Grained Analysis Using HFACS

    DTIC Science & Technology

    2006-07-01

    recruited from the Oklahoma City area as subject-matter experts ( SMEs ). All were certified flight instructors with a minimum of 1,000 flight hours at...standing of specific terms, flight conditions, and the overall domain of aviation to be effectively classified and coded. As aviation SMEs , the pilot...the overall HFACS analysis of the commercial accident reports. Pilots, however, are not SMEs in the domain of psychol- ogy or human factors and may

  5. Uncertainty and sensitivity analysis of early exposure results with the MACCS Reactor Accident Consequence Model

    SciTech Connect

    Helton, J.C.; Johnson, J.D.; McKay, M.D.; Shiver, A.W.; Sprung, J.L.

    1995-01-01

    Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis are used in an investigation with the MACCS model of the early health effects associated with a severe accident at a nuclear power station. The primary purpose of this study is to provide guidance on the variables to be considered in future review work to reduce the uncertainty in the important variables used in the calculation of reactor accident consequences. The effects of 34 imprecisely known input variables on the following reactor accident consequences are studied: number of early fatalities, number of cases of prodromal vomiting, population dose within 10 mi of the reactor, population dose within 1000 mi of the reactor, individual early fatality probability within 1 mi of the reactor, and maximum early fatality distance. When the predicted variables are considered collectively, the following input variables were found to be the dominant contributors to uncertainty: scaling factor for horizontal dispersion, dry deposition velocity, inhalation protection factor for nonevacuees, groundshine shielding factor for nonevacuees, early fatality hazard function alpha value for bone marrow exposure, and scaling factor for vertical dispersion.

  6. Impact of traffic congestion on road accidents: a spatial analysis of the M25 motorway in England.

    PubMed

    Wang, Chao; Quddus, Mohammed A; Ison, Stephen G

    2009-07-01

    Traffic congestion and road accidents are two external costs of transport and the reduction of their impacts is often one of the primary objectives for transport policy makers. The relationship between traffic congestion and road accidents however is not apparent and less studied. It is speculated that there may be an inverse relationship between traffic congestion and road accidents, and as such this poses a potential dilemma for transport policy makers. This study aims to explore the impact of traffic congestion on the frequency of road accidents using a spatial analysis approach, while controlling for other relevant factors that may affect road accidents. The M25 London orbital motorway, divided into 70 segments, was chosen to conduct this study and relevant data on road accidents, traffic and road characteristics were collected. A robust technique has been developed to map M25 accidents onto its segments. Since existing studies have often used a proxy to measure the level of congestion, this study has employed a precise congestion measurement. A series of Poisson based non-spatial (such as Poisson-lognormal and Poisson-gamma) and spatial (Poisson-lognormal with conditional autoregressive priors) models have been used to account for the effects of both heterogeneity and spatial correlation. The results suggest that traffic congestion has little or no impact on the frequency of road accidents on the M25 motorway. All other relevant factors have provided results consistent with existing studies.

  7. Uncertainty and sensitivity analysis of chronic exposure results with the MACCS reactor accident consequence model

    SciTech Connect

    Helton, J.C.; Johnson, J.D.; Rollstin, J.A.; Shiver, A.W.; Sprung, J.L.

    1995-01-01

    Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis are used in an investigation with the MACCS model of the chronic exposure pathways associated with a severe accident at a nuclear power station. The primary purpose of this study is to provide guidance on the variables to be considered in future review work to reduce the uncertainty in the important variables used in the calculation of reactor accident consequences. The effects of 75 imprecisely known input variables on the following reactor accident consequences are studied: crop growing season dose, crop long-term dose, water ingestion dose, milk growing season dose, long-term groundshine dose, long-term inhalation dose, total food pathways dose, total ingestion pathways dose, total long-term pathways dose, total latent cancer fatalities, area-dependent cost, crop disposal cost, milk disposal cost, population-dependent cost, total economic cost, condemnation area, condemnation population, crop disposal area and milk disposal area. When the predicted variables are considered collectively, the following input variables were found to be the dominant contributors to uncertainty: dry deposition velocity, transfer of cesium from animal feed to milk, transfer of cesium from animal feed to meat, ground concentration of Cs-134 at which the disposal of milk products will be initiated, transfer of Sr-90 from soil to legumes, maximum allowable ground concentration of Sr-90 for production of crops, fraction of cesium entering surface water that is consumed in drinking water, groundshine shielding factor, scale factor defining resuspension, dose reduction associated with decontamination, and ground concentration of 1-131 at which disposal of crops will be initiated due to accidents that occur during the growing season.

  8. Calculation notes that support accident scenario and consequence development for the steam intrusion from interfacing systems accident

    SciTech Connect

    Van Vleet, R.J.; Ryan, G.W.; Crowe, R.D.; Lindberg, S.E., Fluor Daniel Hanford

    1997-03-04

    This document supports the development and presentation of the following accident scenario in the TWRS Final Safety Analysis Report (FSAR): Steam Intrusion From Interfacing Systems. The calculations needed to quantify the risk associated with this accident scenario are included in the following sections to aid in the understanding of this accident scenario. Information validation forms citing assumptions that were approved for use specifically in this analysis are included in Appendix A. Copies of these forms are also on file with TWRS Project Files. Calculations performed in this document, in general, are expressed in traditional (English) units to aid understanding of the accident scenario and related parameters.

  9. Preliminary analysis of graphite dust releasing behavior in accident for HTR

    SciTech Connect

    Peng, W.; Yang, X. Y.; Yu, S. Y.; Wang, J.

    2012-07-01

    The behavior of the graphite dust is important to the safety of High Temperature Gas-cooled Reactors. This study investigated the flow of graphite dust in helium mainstream. The analysis of the stresses acting on the graphite dust indicated that gas drag played the absolute leading role. Based on the understanding of the importance of gas drag, an experimental system is set up for the research of dust releasing behavior in accident. Air driven by centrifugal fan is used as the working fluid instead of helium because helium is expensive, easy to leak which make it difficult to seal. The graphite particles, with the size distribution same as in HTR, are added to the experiment loop. The graphite dust releasing behavior at the loss-of-coolant accident will be investigated by a sonic nozzle. (authors)

  10. Probabilistic accident consequence uncertainty analysis -- Uncertainty assessment for internal dosimetry. Volume 1: Main report

    SciTech Connect

    Goossens, L.H.J.; Kraan, B.C.P.; Cooke, R.M.; Harrison, J.D.; Harper, F.T.; Hora, S.C.

    1998-04-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA internal dosimetry models.

  11. Probabilistic accident consequence uncertainty analysis -- Late health effects uncertainty assessment. Volume 1: Main report

    SciTech Connect

    Little, M.P.; Muirhead, C.R.; Goossens, L.H.J.; Kraan, B.C.P.; Cooke, R.M.; Harper, F.T.; Hora, S.C.

    1997-12-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA late health effects models.

  12. Speech analysis as an index of alcohol intoxication--the Exxon Valdez accident.

    PubMed

    Brenner, M; Cash, J R

    1991-09-01

    As part of its investigation of the EXXON VALDEZ tankship accident and oil spill, the National Transportation Safety Board (NTSB) examined the master's speech for alcohol-related effects. Recorded speech samples were obtained from marine radio communications tapes. The samples were tested for four effects associated with alcohol consumption is available scientific literature: slowed speech, speech errors, misarticulation of difficult sounds ("slurring"), and audible changes in speech quality. It was found that speech immediately before and after the accident displayed large changes of the sort associated with alcohol consumption. These changes were not readily explained by fatigue, psychological stress, drug effects, or medical problems. Speech analysis appears to be a useful technique to provide secondary evidence of alcohol impairment.

  13. Probabilistic accident consequence uncertainty analysis -- Early health effects uncertainty assessment. Volume 1: Main report

    SciTech Connect

    Haskin, F.E.; Harper, F.T.; Goossens, L.H.J.; Kraan, B.C.P.; Grupa, J.B.

    1997-12-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA early health effects models.

  14. Optical diffraction analysis of petrographic thin sections.

    PubMed

    Power, P C; Pincus, H J

    1974-10-18

    Diffraction patterns that are highly reproducible, of useful quality, and consistent with the input generating them can be easily obtained with a microscope system. The input can be either a reduced photograph or a thin section. With two exceptions, the relationships between a thin section and its diffraction pattern produced by a petrographic microscope are the same as the relationships between a photographic input and its diffraction pattern produced by a conventional ODA system. The exceptions are that the diffraction patterns generated directly by the thin sections may be asymmetrical or, if the thin section is sufficiently heterogeneous, may be smeared. The microscope system is generally more useful than a conventional ODA system for the analysis of microfabric in thin sections. One can readily use the microscope system to analyze elements of widely varying spatial frequency simply by changing the objectives. The diffraction patterns can be magnified by changing to a higherpower ocular. In most cases the microscope-generated diffraction pattern transmits the useful spatial information in the thin section more completely than the conventionally produced diffraction pattern; the photographic inputs for the conventionally produced diffraction pattern emphasize lower-frequency spatial information. This property, combined with the microscope system's better response to twinning, makes the microscope more sensitive to commonly used microfabric elements. For the analysis of thin sections, a conventional ODA system is superior to the microscope system in only three cases. First, if one wants to analyze the entire thin section at one time, a conventional system must be used with a photographic input of the thin section. Second, if the thin section is extremely heterogeneous (crystallographically or mineralogically), the microscope-generated diffraction pattern may exhibit gross smearing even with the highestpower objectives available. Finally, the thin section may

  15. Sleep Apnea, Sleep Debt and Daytime Sleepiness Are Independently Associated with Road Accidents. A Cross-Sectional Study on Truck Drivers

    PubMed Central

    Guglielmi, Ottavia; Dini, Guglielmo; Bersi, Francesca; Fornarino, Stefania; Toletone, Alessandra; Chiorri, Carlo

    2016-01-01

    Background Recent research has found evidence of an association between motor vehicle accidents (MVAs) or near miss accidents (NMAs), and excessive daytime sleepiness (EDS) or its main medical cause, Obstructive Sleep Apnea (OSA). However, EDS can also be due to non-medical factors, such as sleep debt (SD), which is common among professional truck drivers. On the opposite side, rest breaks and naps are known to protect against accidents. Study Objectives To investigate the association of OSA, SD, EDS, rest breaks and naps, with the occurrence of MVAs and NMAs in a large sample of truck drivers. Methods 949 male truck drivers took part in a cross-sectional medical examination and were asked to complete a questionnaire about sleep and waking habits, risk factors for OSA and EDS. Results MVAs and NMAs were reported by 34.8% and 9.2% of participants, respectively. MVAs were significantly predicted by OSA (OR = 2.32 CI95% = 1.68–3.20), SD (OR = 1.45 CI95% = 1.29–1.63), EDS (OR = 1.73 CI95% = 1.15–2.61) and prevented by naps (OR = 0.59 CI95% = 0.44–0.79) or rest breaks (OR = 0.63 CI95% = 0.45–0.89). NMAs were significantly predicted by OSA (OR = 2.39 CI95% = 1.47–3.87) and SD (OR = 1.49 CI95% = 1.27–1.76) and prevented by naps (OR = 0.52 CI95% = 0.32–0.85) or rest breaks (OR = 0.49 CI95% = 0.29–0.82). Conclusions When OSA, SD or EDS are present, the risk of MVAs or NMAs in truck drivers is severely increased. Taking a rest break or a nap appear to be protective against accidents. PMID:27902703

  16. Analysis of pedestrian accident costs in Sudan using the willingness-to-pay method.

    PubMed

    Mofadal, Adam I A; Kanitpong, Kunnawee; Jiwattanakulpaisarn, Piyapong

    2015-05-01

    The willingness-to-pay (WTP) with contingent valuation (CV) method has been proven to be a valid tool for the valuation of non-market goods or socio-economic costs of road traffic accidents among communities in developed and developing countries. Research on accident costing tends to estimate the value of statistical life (VOSL) for all road users by providing a principle for the evaluation of road safety interventions in cost-benefit analysis. As in many other developing countries, the economic loss of traffic accidents in Sudan is noticeable; however, analytical research to estimate the magnitude and impact of that loss is lacking. Reports have shown that pedestrians account for more than 40% of the total number of fatalities. In this study, the WTP-CV approach was used to determine the amount of money that pedestrians in Sudan are willing to pay to reduce the risk of their own death. The impact of the socioeconomic factors, risk levels, and walking behaviors of pedestrians on their WTP for fatality risk reduction was also evaluated. Data were collected from two cities-Khartoum and Nyala-using a survey questionnaire that included 1400 respondents. The WTP-CV Payment Card Questionnaire was designed to ensure that Sudan pedestrians can easily determine the amount of money that would be required to reduce the fatality risk from a pedestrian-related accident. The analysis results show that the estimated VOSL for Sudanese pedestrians ranges from US$0.019 to US$0.101 million. In addition, the willingness-to-pay by Sudanese pedestrians to reduce their fatality risk tends to increase with age, household income, educational level, safety perception, and average time spent on social activities with family and community.

  17. Space Shuttle Columbia Post-Accident Analysis and Investigation

    NASA Technical Reports Server (NTRS)

    McDanels, Steven J.

    2006-01-01

    Although the loss of the Space Shuttle Columbia and its crew was tragic, the circumstances offered a unique opportunity to examine a multitude of components which had experienced one of the harshest environments ever encountered by engineered materials: a break up at a velocity in excess of Mach 18 and an altitude exceeding 200,000 feet (63 KM), resulting in a debris field 645 miles/l,038 KM long and 10 miles/16 KM wide. Various analytical tools were employed to ascertain the sequence of events leading to the disintegration of the Orbiter and to characterize the features of the debris. The testing and analyses all indicated that a breach in a left wing reinforced carbon/carbon composite leading edge panel was the access point for hot gasses generated during re-entry to penetrate the structure of the vehicle and compromise the integrity of the materials and components in that area of the Shuttle. The analytical and elemental testing utilized such techniques as X-Ray Diffraction (XRD), Energy Dispersive X-Ray (EDX) dot mapping, Electron Micro Probe Analysis (EMPA), and X-Ray Photoelectron Spectroscopy (XPS) to characterize the deposition of intermetallics adjacent to the suspected location of the plasma breach in the leading edge of the left wing, Fig. 1.

  18. Analysis 320 coal mine accidents using structural equation modeling with unsafe conditions of the rules and regulations as exogenous variables.

    PubMed

    Zhang, Yingyu; Shao, Wei; Zhang, Mengjia; Li, Hejun; Yin, Shijiu; Xu, Yingjun

    2016-07-01

    Mining has been historically considered as a naturally high-risk industry worldwide. Deaths caused by coal mine accidents are more than the sum of all other accidents in China. Statistics of 320 coal mine accidents in Shandong province show that all accidents contain indicators of "unsafe conditions of the rules and regulations" with a frequency of 1590, accounting for 74.3% of the total frequency of 2140. "Unsafe behaviors of the operator" is another important contributory factor, which mainly includes "operator error" and "venturing into dangerous places." A systems analysis approach was applied by using structural equation modeling (SEM) to examine the interactions between the contributory factors of coal mine accidents. The analysis of results leads to three conclusions. (i) "Unsafe conditions of the rules and regulations," affect the "unsafe behaviors of the operator," "unsafe conditions of the equipment," and "unsafe conditions of the environment." (ii) The three influencing factors of coal mine accidents (with the frequency of effect relation in descending order) are "lack of safety education and training," "rules and regulations of safety production responsibility," and "rules and regulations of supervision and inspection." (iii) The three influenced factors (with the frequency in descending order) of coal mine accidents are "venturing into dangerous places," "poor workplace environment," and "operator error."

  19. SAS4A: A computer model for the analysis of hypothetical core disruptive accidents in liquid metal reactors

    SciTech Connect

    Tentner, A.M.; Birgersson, G.; Cahalan, J.E.; Dunn, F.E.; Kalimullah; Miles, K.J.

    1987-01-01

    To ensure that the public health and safety are protected under any accident conditions in a Liquid Metal Fast Breeder Reactor (LMFBR), many accidents are analyzed for their potential consequences. The SAS4A code system, described in this paper, provides such an analysis capability, including the ability to analyze low probability events such as the Hypothetical Core Disruptive Accidents (HCDAs). The SAS4A code system has been designed to simulate all the events that occur in a LMFBR core during the initiating phase of a Hypothetical Core Disruptive Accident. During such postulated accident scenarios as the Loss-of-Flow and Transient Overpower events, a large number of interrelated physical phenomena occur during a relatively short time. These phenomena include transient heat transfer and hydrodynamic events, coolant boiling and fuel and cladding melting and relocation. During to the strong neutronic feedback present in a nuclear reactor, these events can significantly influence the reactor power. The SAS4A code system is used in the safety analysis of nuclear reactors, in order to estimate the energetic potential of very low probability accidents. The results of SAS4A simulations are also used by reactor designers in order to build safer reactors and eliminate the possibility of any accident which could endanger the public safety.

  20. Determination of the end state of the Three Mile Island Unit 2 accident using neutron transport analysis

    SciTech Connect

    Bandini, B.R.; Baratta, A.J. ); Fricke, V.R. )

    1988-06-01

    Since the March 1979 accident, the source range monitors (SRMs) at Three Mile Island Unit 2 (TMI-2) have been reading several orders of magnitude higher than would be expected in a normal shutdown core. A study in which these anomalous SRM readings are analyzed and the cause determined is reported. Here, the DOT 4.3 two-dimensional transport code was used to simulate the SRM response and the response of an axial string of solid-state track recorders by modeling the neutronics of the damaged TMI-2 core. This modeling has indicated the presence of -- 10 tonnes of fuel material in the lower vessel plenum, a condition that was subsequently verified by direct observation. The computational model, the method of cross-section preparation, and an analysis of the various core neutron sources are described, as well as the results obtained from this effort.

  1. Light-Weight Radioisotope Heater Unit final safety analysis report (LWRHU-FSAR): Volume 2: Accident Model Document (AMD)

    SciTech Connect

    Johnson, E.W.

    1988-10-01

    The purpose of this volume of the LWRHU SAR, the Accident Model Document (AMD), are to: Identify all malfunctions, both singular and multiple, which can occur during the complete mission profile that could lead to release outside the clad of the radioisotopic material contained therein; Provide estimates of occurrence probabilities associated with these various accidents; Evaluate the response of the LWRHU (or its components) to the resultant accident environments; and Associate the potential event history with test data or analysis to determine the potential interaction of the released radionuclides with the biosphere.

  2. Radiation-related anxiety among public health nurses in the Fukushima Prefecture after the accident at the Fukushima Daiichi Nuclear Power Station: a cross-sectional study

    PubMed Central

    Yoshida, Koji; Orita, Makiko; Goto, Aya; Kumagai, Atsushi; Yasui, Kiyotaka; Ohtsuru, Akira; Hayashida, Naomi; Kudo, Takashi; Yamashita, Shunichi; Takamura, Noboru

    2016-01-01

    Objective In Japan, public health nurses (PHNs) play important roles in managing the health of local residents, especially after a disaster. In this study, we assessed radiation anxiety and the stress processing capacity of PHNs in the Fukushima Prefecture in Japan, after the accident at the Fukushima Daiichi Nuclear Power Station (FDNPS). Methods We conducted a questionnaire survey among the PHNs (n=430) in July of 2015 via postal mail. The questions included demographic factors (sex, age and employment position), knowledge about radiation, degree of anxiety about radiation at the time of the FDNPS accident (and at present), by asking them to answer questions about radiation and the Sense of Coherence-13 (SOC-13). We classified the low and high levels of anxiety by asking them to answer questions about radiation, and compared the anxiety-negative (−) group with the anxiety-positive (+) group. Results Of the PHNs, 269 (62.6%) were classified in the anxiety (−) group and 161 (37.4%) were in the anxiety (+) group. When the multivariate logistic regression analysis was conducted, the PHNs at the time of the accident (OR: 2.37, p=0.007), current general anxieties about radiation (OR: 3.56, p<0.001), current possession of materials to obtain knowledge about radiation (OR: 2.11, p=0.006) and knowledge of the childhood thyroid cancer increase after the Chernobyl accident (OR: 1.69, p=0.035) were significantly associated with anxiety after the FDNPS accident. The mean SOC-13 was 43.0±7.7, with no significant difference between the anxiety (−) group and anxiety (+) group (p=0.47). Conclusions Our study suggested that anxiety about radiation was associated with materials and knowledge about radiation in the PHNs in the Fukushima Prefecture 4 years after the FDNPS accident. It is important for PHNs to obtain knowledge and teaching materials about radiation, and radiation education programmes for PHNs must be established in areas that have nuclear facilities. PMID

  3. Independent assessment of MELCOR as a severe accident thermal-hydraulic/source term analysis tool

    SciTech Connect

    Madni, I.K.

    1995-11-01

    MELCOR is a fully integrated computer code that models all phases of the progression of severe accidents in light water reactor (LWR) nuclear power plants and is being developed for the US Nuclear Regulatory Commission (NRC) by Sandia National Laboratories. Brookhaven National Laboratory (BNL) has a program with the NRC called MELCOR Verification, Benchmarking, and Applications, the aim of which is to provide independent assessment of MELCOR as a severe accident thermal-hydraulic/source term analysis tool. The scope of this program is to perform quality control verification on all released versions of MELCOR, to benchmark MELCOR against more mechanistic codes and experimental data from severe fuel damage tests, and to evaluate the ability of MELCOR to simulate long-term severe accident transients in commercial LWRs, by applying the code to model both boiling water reactors and pressurized water reactors. Under this program, BNL provided input to the NRC-sponsored MELCOR Peer Review and is currently contributing to the MELCOR Cooperative Assessment Program (MCAP). A summary of MELCOR assessment efforts at BNL and their contribution to NRC goals with respect to MELCOR is presented.

  4. Independent assessment of MELCOR as a severe accident thermal-hydraulic/source term analysis tool

    SciTech Connect

    Madni, I.K.; Eltawila, F.

    1994-01-01

    MELCOR is a fully integrated computer code that models all phases of the progression of severe accidents in light water reactor nuclear power plants, and is being developed for the US Nuclear Regulatory Commission (NRC) by Sandia National Laboratories (SNL). Brookhaven National Laboratory (BNL) has a program with the NRC called ``MELCOR Verification, Benchmarking, and Applications,`` whose aim is to provide independent assessment of MELCOR as a severe accident thermal-hydraulic/source term analysis tool. The scope of this program is to perform quality control verification on all released versions of MELCOR, to benchmark MELCOR against more mechanistic codes and experimental data from severe fuel damage tests, and to evaluate the ability of MELCOR to simulate long-term severe accident transients in commercial LWRs, by applying the code to model both BWRs and PWRs. Under this program, BNL provided input to the NRC-sponsored MELCOR Peer Review, and is currently contributing to the MELCOR Cooperative Assessment Program (MCAP). This paper presents a summary of MELCOR assessment efforts at BNL and their contribution to NRC goals with respect to MELCOR.

  5. Verification of fire and explosion accident analysis codes (facility design and preliminary results)

    SciTech Connect

    Gregory, W.S.; Nichols, B.D.; Talbott, D.V.; Smith, P.R.; Fenton, D.L.

    1985-01-01

    For several years, the US Nuclear Regulatory Commission has sponsored the development of methods for improving capabilities to analyze the effects of postulated accidents in nuclear facilities; the accidents of interest are those that could occur during nuclear materials handling. At the Los Alamos National Laboratory, this program has resulted in three computer codes: FIRAC, EXPAC, and TORAC. These codes are designed to predict the effects of fires, explosions, and tornadoes in nuclear facilities. Particular emphasis is placed on the movement of airborne radioactive material through the gaseous effluent treatment system of a nuclear installation. The design, construction, and calibration of an experimental ventilation system to verify the fire and explosion accident analysis codes are described. The facility features a large industrial heater and several aerosol smoke generators that are used to simulate fires. Both injected thermal energy and aerosol mass can be controlled using this equipment. Explosions are simulated with H/sub 2//O/sub 2/ balloons and small explosive charges. Experimental measurements of temperature, energy, aerosol release rates, smoke concentration, and mass accumulation on HEPA filters can be made. Volumetric flow rate and differential pressures also are monitored. The initial experiments involve varying parameters such as thermal and aerosol rate and ventilation flow rate. FIRAC prediction results are presented. 10 figs.

  6. Analysis of National Major Work Safety Accidents in China, 2003–2012

    PubMed Central

    YE, Yunfeng; ZHANG, Siheng; RAO, Jiaming; WANG, Haiqing; LI, Yang; WANG, Shengyong; DONG, Xiaomei

    2016-01-01

    Background: This study provides a national profile of major work safety accidents in China, which cause more than 10 fatalities per accident, intended to provide scientific basis for prevention measures and strategies to reduce major work safety accidents and deaths. Methods: Data from 2003–2012 Census of major work safety accidents were collected from State Administration of Work Safety System (SAWS). Published literature and statistical yearbook were also included to implement information. We analyzed the frequency of accidents and deaths, trend, geographic distribution and injury types. Additionally, we discussed the severity and urgency of emergency rescue by types of accidents. Results: A total of 877 major work safety accidents were reported, resulting in 16,795 deaths and 9,183 injuries. The numbers of accidents and deaths, mortality rate and incidence of major accidents have declined in recent years. The mortality rate and incidence was 0.71 and 1.20 per 106 populations in 2012, respectively. Transportation and mining contributed to the highest number of major accidents and deaths. Major aviation and railway accidents caused more casualties per incident, while collapse, machinery, electrical shock accidents and tailing dam accidents were the most severe situation that resulted in bigger proportion of death. Conclusion: Ten years’ major work safety accident data indicate that the frequency of accidents and number of eaths was declined and several safety concerns persist in some segments. PMID:27057515

  7. Accident consequences analysis of the HYLIFE-II inertial fusion energy power plant design

    SciTech Connect

    Reyes, S; Gomez del Rio, J; Sanz, J

    2000-02-23

    Previous studies of the safety and environmental (S and E) aspects of the HYLIFE-II inertial fusion energy (IFE) power plant design have used simplistic assumptions in order to estimate radioactivity releases under accident conditions. Conservatisms associated with these traditional analyses can mask the actual behavior of the plant and have revealed the need for more accurate modeling and analysis of accident conditions and radioactivity mobilization mechanisms. In the present work a set of computer codes traditionally used for magnetic fusion safety analyses (CHEMCON, MELCOR) has been applied for simulating accident conditions in a simple model of the HYLIFE-II IFE design. Here the authors consider a severe lost of coolant accident (LOCA) producing simultaneous failures of the beam tubes (providing a pathway for radioactivity release from the vacuum vessel towards the containment) and of the two barriers surrounding the chamber (inner shielding and containment building it self). Even though containment failure would be a very unlikely event it would be needed in order to produce significant off-site doses. CHEMCON code allows calculation of long-term temperature transients in fusion reactor first wall, blanket, and shield structures resulting from decay heating. MELCOR is used to simulate a wide range of physical phenomena including thermal-hydraulics, heat transfer, aerosol physics and fusion product release and transport. The results of these calculations show that the estimated off-site dose is less than 6 mSv (0.6 rem), which is well below the value of 10 mSv (1 rem) given by the DOE Fusion Safety Standards for protection of the public from exposure to radiation during off-normal conditions.

  8. Operator error and system deficiencies: analysis of 508 mining incidents and accidents from Queensland, Australia using HFACS.

    PubMed

    Patterson, Jessica M; Shappell, Scott A

    2010-07-01

    Historically, mining has been viewed as an inherently high-risk industry. Nevertheless, the introduction of new technology and a heightened concern for safety has yielded marked reductions in accident and injury rates over the last several decades. In an effort to further reduce these rates, the human factors associated with incidents/accidents needs to be addressed. A modified version of the Human Factors Analysis and Classification System was used to analyze incident and accident cases from across the state of Queensland to identify human factor trends and system deficiencies within mining. An analysis of the data revealed that skill-based errors were the most common unsafe act and showed no significant differences across mine types. However, decision errors did vary across mine types. Findings for unsafe acts were consistent across the time period examined. By illuminating human causal factors in a systematic fashion, this study has provided mine safety professionals the information necessary to reduce mine incidents/accidents further.

  9. Radiation protection: an analysis of thyroid blocking. [Effectiveness of KI in reducing radioactive uptake following potential reactor accident

    SciTech Connect

    Aldrich, D C; Blond, R M

    1980-01-01

    An analysis was performed to provide guidance to policymakers concerning the effectiveness of potassium iodide (KI) as a thyroid blocking agent in potential reactor accident situations, the distance to which (or area within which) it should be distributed, and its relative effectiveness compared to other available protective measures. The analysis was performed using the Reactor Safety Study (WASH-1400) consequence model. Four categories of accidents were addressed: gap activity release accident (GAP), GAP without containment isolation, core melt with a melt-through release, and core melt with an atmospheric release. Cost-benefit ratios (US $/thyroid nodule prevented) are given assuming that no other protective measures are taken. Uncertainties due to health effects parameters, accident probabilities, and costs are assessed. The effects of other potential protective measures, such as evacuation and sheltering, and the impact on children (critical population) are evaluated. Finally, risk-benefit considerations are briefly discussed.

  10. A Look at Aircraft Accident Analysis in the Early Days: Do Early 20th Century Accident Investigation Techniques Have Any Lessons for Today?

    NASA Technical Reports Server (NTRS)

    Holloway, C. M.; Johnson, C. W.

    2007-01-01

    In the early years of powered flight, the National Advisory Committee on Aeronautics in the United States produced three reports describing a method of analysis of aircraft accidents. The first report was published in 1928; the second, which was a revision of the first, was published in 1930; and the third, which was a revision and update of the second, was published in 1936. This paper describes the contents of these reports, and compares the method of analysis proposed therein to the methods used today.

  11. Light-Weight Radioisotope Heater Unit Safety Analysis Report (LWRHU-SAR). Volume II. Accident model document

    SciTech Connect

    Johnson, E.W.

    1985-10-01

    Purposes of this volume (AMD), are to: Identify all malfunctions, both singular and multiple, which can occur during the complete mission profile that could lead to release outside the clad of the radioisotopic material contained therein; provide estimates of occurrence probabilities associated with these various accidents; evaluate the response of the LWRHU (or its components) to the resultant accident environments; and associate the potential event history with test data or analysis to determine the potential interaction of the released radionuclides with the biosphere.

  12. Progress in Addressing DNFSB Recommendation 2002-1 Issues: Improving Accident Analysis Software Applications

    SciTech Connect

    VINCENT, ANDREW

    2005-04-25

    Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2002-1 (''Quality Assurance for Safety-Related Software'') identified a number of quality assurance issues on the use of software in Department of Energy (DOE) facilities for analyzing hazards, and designing and operating controls to prevent or mitigate potential accidents. Over the last year, DOE has begun several processes and programs as part of the Implementation Plan commitments, and in particular, has made significant progress in addressing several sets of issues particularly important in the application of software for performing hazard and accident analysis. The work discussed here demonstrates that through these actions, Software Quality Assurance (SQA) guidance and software tools are available that can be used to improve resulting safety analysis. Specifically, five of the primary actions corresponding to the commitments made in the Implementation Plan to Recommendation 2002-1 are identified and discussed in this paper. Included are the web-based DOE SQA Knowledge Portal and the Central Registry, guidance and gap analysis reports, electronic bulletin board and discussion forum, and a DOE safety software guide. These SQA products can benefit DOE safety contractors in the development of hazard and accident analysis by precluding inappropriate software applications and utilizing best practices when incorporating software results to safety basis documentation. The improvement actions discussed here mark a beginning to establishing stronger, standard-compliant programs, practices, and processes in SQA among safety software users, managers, and reviewers throughout the DOE Complex. Additional effort is needed, however, particularly in: (1) processes to add new software applications to the DOE Safety Software Toolbox; (2) improving the effectiveness of software issue communication; and (3) promoting a safety software quality assurance culture.

  13. Analysis of Maximum Reasonably Foreseeable Accidents for the Yucca Mountain Draft Environmental Impact Statement (DEIS)

    SciTech Connect

    S.B. Ross; R.E. Best; S.J. Maheras; T.I. McSweeney

    2001-08-17

    Accidents could occur during the transportation of spent nuclear fuel and high-level radioactive waste. This paper describes the risks and consequences to the public from accidents that are highly unlikely but that could have severe consequences. The impact of these accidents would include those to a collective population and to hypothetical maximally exposed individuals (MEIs). This document discusses accidents with conditions that have a chance of occurring more often than 1 in 10 million times in a year, called ''maximum reasonably foreseeable accidents''. Accidents and conditions less likely than this are not considered to be reasonably foreseeable.

  14. Visualization of Traffic Accidents

    NASA Technical Reports Server (NTRS)

    Wang, Jie; Shen, Yuzhong; Khattak, Asad

    2010-01-01

    Traffic accidents have tremendous impact on society. Annually approximately 6.4 million vehicle accidents are reported by police in the US and nearly half of them result in catastrophic injuries. Visualizations of traffic accidents using geographic information systems (GIS) greatly facilitate handling and analysis of traffic accidents in many aspects. Environmental Systems Research Institute (ESRI), Inc. is the world leader in GIS research and development. ArcGIS, a software package developed by ESRI, has the capabilities to display events associated with a road network, such as accident locations, and pavement quality. But when event locations related to a road network are processed, the existing algorithm used by ArcGIS does not utilize all the information related to the routes of the road network and produces erroneous visualization results of event locations. This software bug causes serious problems for applications in which accurate location information is critical for emergency responses, such as traffic accidents. This paper aims to address this problem and proposes an improved method that utilizes all relevant information of traffic accidents, namely, route number, direction, and mile post, and extracts correct event locations for accurate traffic accident visualization and analysis. The proposed method generates a new shape file for traffic accidents and displays them on top of the existing road network in ArcGIS. Visualization of traffic accidents along Hampton Roads Bridge Tunnel is included to demonstrate the effectiveness of the proposed method.

  15. Analysis of the source range monitor during the first four hours of the Three Mile Island Unit 2 accident

    SciTech Connect

    Wu, H.Y.; Bandini, B.R. ); Hsiao, M.Y.; Baratta, A.J.; Bandini, B.R. . Dept. of Nuclear Engineering); Tolman, E.L. )

    1989-02-01

    The source range monitor (SRM) data recorded during the first 4 h of the Three Mile Island Unit 2 (TMI-2) accident following reactor shutdown were analyzed. An effort to simulate the actual SRM response was made by performing a series of neutron transport calculations. Primary emphasis was placed on simulating the changes in SRM response to various system events during the accident so as to obtain useful information about core conditions at the various stages. Based on the known end-state reactor conditions, the major system events and the actual SRM readings, self-consistent estimates were made of core liquid level, void fraction in the coolant, and locations of core materials. This analysis expands the possible interpretation of the SRM data relative to core damage progression. The results appear to be consistent with other studies of the TMI-2 Accident Evaluation Program, and provide information useful for the development and determination of the TMI-2 accident scenario.

  16. Source term analysis for a criticality accident in metal production line glove boxes

    SciTech Connect

    Nguyen, D.H.

    1991-06-01

    A recent development in criticality accident analysis is the deterministic calculations of the transport of fission products and actinides through the barriers of the physical facility. The knowledge of the redistribution of the materials inside the facility will help determine the reentry and clean-up procedures. The amount of radioactive materials released to the environment is the source term for dispersion calculations. We have used an integrated computer model to determine the release of fission products to the environment from a hypothetical criticality event in a glove box of the metal production line (MPL) at the Lawrence Livermore National Laboratory (LLNL).

  17. Systems thinking, the Swiss Cheese Model and accident analysis: a comparative systemic analysis of the Grayrigg train derailment using the ATSB, AcciMap and STAMP models.

    PubMed

    Underwood, Peter; Waterson, Patrick

    2014-07-01

    The Swiss Cheese Model (SCM) is the most popular accident causation model and is widely used throughout various industries. A debate exists in the research literature over whether the SCM remains a viable tool for accident analysis. Critics of the model suggest that it provides a sequential, oversimplified view of accidents. Conversely, proponents suggest that it embodies the concepts of systems theory, as per the contemporary systemic analysis techniques. The aim of this paper was to consider whether the SCM can provide a systems thinking approach and remain a viable option for accident analysis. To achieve this, the train derailment at Grayrigg was analysed with an SCM-based model (the ATSB accident investigation model) and two systemic accident analysis methods (AcciMap and STAMP). The analysis outputs and usage of the techniques were compared. The findings of the study showed that each model applied the systems thinking approach. However, the ATSB model and AcciMap graphically presented their findings in a more succinct manner, whereas STAMP more clearly embodied the concepts of systems theory. The study suggests that, whilst the selection of an analysis method is subject to trade-offs that practitioners and researchers must make, the SCM remains a viable model for accident analysis.

  18. A Flexible Hierarchical Bayesian Modeling Technique for Risk Analysis of Major Accidents.

    PubMed

    Yu, Hongyang; Khan, Faisal; Veitch, Brian

    2017-02-28

    Safety analysis of rare events with potentially catastrophic consequences is challenged by data scarcity and uncertainty. Traditional causation-based approaches, such as fault tree and event tree (used to model rare event), suffer from a number of weaknesses. These include the static structure of the event causation, lack of event occurrence data, and need for reliable prior information. In this study, a new hierarchical Bayesian modeling based technique is proposed to overcome these drawbacks. The proposed technique can be used as a flexible technique for risk analysis of major accidents. It enables both forward and backward analysis in quantitative reasoning and the treatment of interdependence among the model parameters. Source-to-source variability in data sources is also taken into account through a robust probabilistic safety analysis. The applicability of the proposed technique has been demonstrated through a case study in marine and offshore industry.

  19. Narrative text analysis of accident reports with tractors, self-propelled harvesting machinery and materials handling machinery in Austrian agriculture from 2008 to 2010 - a comparison.

    PubMed

    Mayrhofer, Hannes; Quendler, Elisabeth; Boxberger, Josef

    2014-01-01

    The aim of this study was the identification of accident scenarios and causes by analysing existing accident reports of recognized agricultural occupational accidents with tractors, self-propelled harvesting machinery and materials handling machinery from 2008 to 2010. As a result of a literature-based evaluation of past accident analyses, the narrative text analysis was chosen as an appropriate method. A narrative analysis of the text fields of accident reports that farmers used to report accidents to insurers was conducted to obtain detailed information about the scenarios and causes of accidents. This narrative analysis of reports was made the first time and yielded first insights for identifying antecedents of accidents and potential opportunities for technical based intervention. A literature and internet search was done to discuss and confirm the findings. The narrative text analysis showed that in more than one third of the accidents with tractors and materials handling machinery the vehicle rolled or tipped over. The most relevant accident scenarios with harvesting machinery were being trapped and falling down. The direct comparison of the analysed machinery categories showed that more than 10% of the accidents in each category were caused by technical faults, slippery or muddy terrain and incorrect or inappropriate operation of the vehicle. Accidents with tractors, harvesting machinery and materials handling machinery showed similarities in terms of causes, circumstances and consequences. Certain technical and communicative measures for accident prevention could be used for all three machinery categories. Nevertheless, some individual solutions for accident prevention, which suit each specific machine type, would be necessary.

  20. A Content Analysis of News Media Coverage of the Accident at Three Mile Island.

    ERIC Educational Resources Information Center

    Stephens, Mitchell; Edison, Nadyne G.

    A study was conducted for the President's Commission on the Accident at Three Mile Island to analyze coverage of the accident by ten news organizations: two wire services, three commercial television networks, and five daily newspapers. Copies of all stories and transcripts of news programs during the first week of the accident were examined from…

  1. Analysis of Occupational Accident Fatalities and Injuries Among Male Group in Iran Between 2008 and 2012

    PubMed Central

    Alizadeh, Seyed Shamseddin; Mortazavi, Seyed Bagher; Sepehri, Mohammad Mehdi

    2015-01-01

    Background: Because of occupational accidents, permanent disabilities and deaths occur and economic and workday losses emerge. Objectives: The purpose of the present study was to investigate the factors responsible for occupational accidents occurred in Iran. Patients and Methods: The current study analyzed 1464 occupational accidents recorded by the Ministry of Labor and Social Affairs’ offices in Iran during 2008 - 2012. At first, general understanding of accidents was obtained using descriptive statistics. Afterwards, the chi-square test and Cramer’s V statistic (Vc) were used to determine the association between factors influencing the type of injury as occupational accident outcomes. Results: There was no significant association between marital status and time of day with the type of injury. However, activity sector, cause of accident, victim’s education, age of victim and victim’s experience were significantly associated with the type of injury. Conclusions: Successful accident prevention relies largely on knowledge about the causes of accidents. In any accident control activity, particularly in occupational accidents, correctly identifying high-risk groups and factors influencing accidents is the key to successful interventions. Results of this study can cause to increase accident awareness and enable workplace’s management to select and prioritize problem areas and safety system weakness in workplaces. PMID:26568848

  2. Analysis of Kuosheng Large-Break Loss-of-Coolant Accident with MELCOR 1.8.4

    SciTech Connect

    Wang, T.-C.; Wang, S.-J.; Chien, C.-S

    2000-09-15

    The MELCOR code, developed by Sandia National Laboratories, is capable of simulating the severe accident phenomena of light water reactor nuclear power plants (NPPs). A specific large-break loss-of-coolant accident (LOCA) for Kuosheng NPP is simulated with the use of the MELCOR 1.8.4 code. This accident is induced by a double-ended guillotine break of one of the recirculation pipes concurrent with complete failure of the emergency core cooling system. The MELCOR input deck for the Kuosheng NPP is established based on the design data of the Kuosheng NPP and the MELCOR users' guides. The initial steady-state conditions are generated with a developed self-initialization algorithm. The effect of the MELCOR 1.8.4-provided initialization process is demonstrated. The main severe accident phenomena and the corresponding fission product released fractions associated with the large-break LOCA sequences are simulated. The MELCOR 1.8.4 predicts a longer time interval between the core collapse and vessel failure and a higher source term. This MELCOR 1.8.4 input deck will be applied to the probabilistic risk assessment, the severe accident analysis, and the severe accident management study of the Kuosheng NPP in the near future.

  3. MELCOR Analysis of Steam Generator Tube Creep Rupture in Station Blackout Severe Accident

    SciTech Connect

    Liao, Y.; Vierow, K.

    2005-12-15

    A pressurized water reactor steam generator tube rupture (SGTR) is of concern because it represents a bypass of the containment for radioactive materials to the environment. In a station blackout accident, tube integrity could be threatened by creep rupture, particularly if cracks are present in the tube walls. Methods are developed herein to improve assessment capabilities for SGTR by using the severe-accident code MELCOR. Best-estimate assumptions based on recent research and computational fluid dynamics calculations are applied in the MELCOR analysis to simulate two-dimensional natural circulation and to determine the relative creep-rupture timing in the reactor coolant pressure boundary components. A new method is developed to estimate the steam generator (SG) hottest tube wall temperature and the tube critical crack size for the SG tubes to fail first. The critical crack size for SG tubes to fail first is estimated to be 20% of the wall thickness larger than by a previous analysis. Sensitivity studies show that the failure sequence would change if some assumptions are modified. In particular, the uncertainty in the countercurrent flow limit model could reverse the failure sequence of the SG tubes and surge line.

  4. NASA Structural Analysis Report on the American Airlines Flight 587 Accident - Local Analysis of the Right Rear Lug

    NASA Technical Reports Server (NTRS)

    Raju, Ivatury S; Glaessgen, Edward H.; Mason, Brian H; Krishnamurthy, Thiagarajan; Davila, Carlos G

    2005-01-01

    A detailed finite element analysis of the right rear lug of the American Airlines Flight 587 - Airbus A300-600R was performed as part of the National Transportation Safety Board s failure investigation of the accident that occurred on November 12, 2001. The loads experienced by the right rear lug are evaluated using global models of the vertical tail, local models near the right rear lug, and a global-local analysis procedure. The right rear lug was analyzed using two modeling approaches. In the first approach, solid-shell type modeling is used, and in the second approach, layered-shell type modeling is used. The solid-shell and the layered-shell modeling approaches were used in progressive failure analyses (PFA) to determine the load, mode, and location of failure in the right rear lug under loading representative of an Airbus certification test conducted in 1985 (the 1985-certification test). Both analyses were in excellent agreement with each other on the predicted failure loads, failure mode, and location of failure. The solid-shell type modeling was then used to analyze both a subcomponent test conducted by Airbus in 2003 (the 2003-subcomponent test) and the accident condition. Excellent agreement was observed between the analyses and the observed failures in both cases. From the analyses conducted and presented in this paper, the following conclusions were drawn. The moment, Mx (moment about the fuselage longitudinal axis), has significant effect on the failure load of the lugs. Higher absolute values of Mx give lower failure loads. The predicted load, mode, and location of the failure of the 1985-certification test, 2003-subcomponent test, and the accident condition are in very good agreement. This agreement suggests that the 1985-certification and 2003- subcomponent tests represent the accident condition accurately. The failure mode of the right rear lug for the 1985-certification test, 2003-subcomponent test, and the accident load case is identified as a

  5. Accident Analysis Simulation in Modular 300MWt Gas Cooled Fast Reactor

    NASA Astrophysics Data System (ADS)

    Zaki, Su’ud

    2017-01-01

    Safety analysis of 300MWt helium gas cooled long-life fast reactors has been performed. The analysis of unprotected loss of flow(ULOF) and unprotected rod run-out transient overpower (UTOP) are discussed. Some simulations for 300 MWt He gas cooled fast reactors has been performed and the results show that the reactor can anticipate complete pumping failure inherently by reducing power through reactivity feedback and remove the rest of heat through natural circulations. GCFR relatively has hard spectrum so it has relatively small Doppler coefficient. In the UTOP accident case the analysis has been performed against external reactivity up to 0.002dk/k. In addition the steam generator design has also consider excess power during severe UTOP case..

  6. Sectional analysis of reinforced concrete members

    NASA Astrophysics Data System (ADS)

    Bentz, Evan C.

    2000-10-01

    Four easy to use programs have been written that allow for state of the art sectional analysis of reinforced concrete blocks, plates, beams, columns and shells. Unlike most sectional analysis programs, these programs include the effects of shear on behaviour. They are based on the assumption that plane sections remain plane, that there is no transverse clamping stress, and that the biaxial behaviour can be modelled well by the Modified Compression Field Theory (MCFT). Each of these assumptions is shown to be reasonable. The programs are freely available on the World Wide Web at the listed addresses: http://www.ecf.utoronto.ca/ ˜bentz/m2k.htm Membrane-2000 for plates http://www.ecf.utoronto.ca/ ˜bentz/r2k.htm Response-2000 for beams and columns http://www.ecf.utoronto.ca/ ˜bentz/t2k.htm Triax-2000 for 3D blocks http://www.ecf.utoronto.ca/ ˜bentz/s2k.htm Shell-2000: shells with out-of-plane forces This thesis describes the MCFT in detail as implemented in the programs as well as explaining new constitutive relations employed for the behaviour of concrete in tension. The strongest feature of the new programs is the employment of the longitudinal stiffness method, developed for this thesis, which calculates the shear stress profile for a beam or shell much faster and with more numerical stability than the previous state of the art. The programs are verified against a set of experiments as well as against two new shear experiments performed for this thesis. They indicate the programs are good at predicting the behaviour of the elements. Response-2000 is compared to a database of 534 beams and shown to predict shear strengths with an average experimental over predicted shear strength ratio of 1.05 and with a coefficient of variation of 12%. This compares favourably to the ACI code prediction ratios that have an average of 1.20 and a coefficient of variation of 32%. It is suggested that the programs in this thesis represent a good first step in allowing rational

  7. Electrical equipment performance under severe accident conditions (BWR/Mark 1 plant analysis): Summary report

    SciTech Connect

    Bennett, P.R.; Kolaczkowski, A.M.; Medford, G.T.

    1986-09-01

    The purpose of the Performance Evaluation of Electrical Equipment during Severe Accident States Program is to determine the performance of electrical equipment, important to safety, under severe accident conditions. In FY85, a method was devised to identify important electrical equipment and the severe accident environments in which the equipment was likely to fail. This method was used to evaluate the equipment and severe accident environments for Browns Ferry Unit 1, a BWR/Mark I. Following this work, a test plan was written in FY86 to experimentally determine the performance of one selected component to two severe accident environments.

  8. Probabilistic accident consequence uncertainty analysis -- Early health effects uncertainty assessment. Volume 2: Appendices

    SciTech Connect

    Haskin, F.E.; Harper, F.T.; Goossens, L.H.J.; Kraan, B.C.P.

    1997-12-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA early health effects models. This volume contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures, (3) the rationales and results for the panel on early health effects, (4) short biographies of the experts, and (5) the aggregated results of their responses.

  9. Probabilistic accident consequence uncertainty analysis -- Uncertainty assessment for deposited material and external doses. Volume 2: Appendices

    SciTech Connect

    Goossens, L.H.J.; Kraan, B.C.P.; Cooke, R.M.; Boardman, J.; Jones, J.A.; Harper, F.T.; Young, M.L.; Hora, S.C.

    1997-12-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA deposited material and external dose models. This volume contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures, (3) the rationales and results for the panel on deposited material and external doses, (4) short biographies of the experts, and (5) the aggregated results of their responses.

  10. Probabilistic accident consequence uncertainty analysis -- Late health effects uncertain assessment. Volume 2: Appendices

    SciTech Connect

    Little, M.P.; Muirhead, C.R.; Goossens, L.H.J.; Kraan, B.C.P.; Cooke, R.M.; Harper, F.T.; Hora, S.C.

    1997-12-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA late health effects models. This volume contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures, (3) the rationales and results for the expert panel on late health effects, (4) short biographies of the experts, and (5) the aggregated results of their responses.

  11. Learning from the Piper Alpha accident: A postmortem analysis of technical and organizational factors

    SciTech Connect

    Pate-Cornell, M.E. )

    1993-04-01

    The accident that occurred on board the offshore platform Piper Alpha in July 1988 killed 167 people and cost billions of dollars in property damage. It was caused by a massive fire, which was not the result of an unpredictable act of God' but of an accumulation of errors and questionable decisions. Most of them were rooted in the organization, its structure, procedures, and culture. This paper analyzes the accident scenario using the risk analysis framework, determines which human decision and actions influenced the occurrence of the basic events, and then identifies the organizational roots of these decisions and actions. These organizational factors are generalizable to other industries and engineering systems. They include flaws in the design guidelines and design practices (e.g., tight physical couplings or insufficient redundancies), misguided priorities in the management of the tradeoff between productivity and safety, mistakes in the management of the personnel on board, and errors of judgement in the process by which financial pressures are applied on the production sector (i.e., the oil companies' definition of profit centers) resulting in deficiencies in inspection and maintenance operations. This analytical approach allows identification of risk management measures that go beyond the purely technical (e.g., add redundancies to a safety system) and also include improvements of management practices. 18 refs., 4 figs.

  12. Probabilistic accident consequence uncertainty analysis -- Uncertainty assessment for internal dosimetry. Volume 2: Appendices

    SciTech Connect

    Goossens, L.H.J.; Kraan, B.C.P.; Cooke, R.M.; Harrison, J.D.; Harper, F.T.; Hora, S.C.

    1998-04-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA internal dosimetry models. This volume contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures, (3) the rationales and results for the panel on internal dosimetry, (4) short biographies of the experts, and (5) the aggregated results of their responses.

  13. Risk assessment of maintenance operations: the analysis of performing task and accident mechanism.

    PubMed

    Carrillo-Castrillo, Jesús A; Rubio-Romero, Juan Carlos; Guadix, Jose; Onieva, Luis

    2015-01-01

    Maintenance operations cover a great number of occupations. Most small and medium-sized enterprises lack the appropriate information to conduct risk assessments of maintenance operations. The objective of this research is to provide a method based on the concepts of task and accident mechanisms for an initial risk assessment by taking into consideration the prevalence and severity of the maintenance accidents reported. Data were gathered from 11,190 reported accidents in maintenance operations in the manufacturing sector of Andalusia from 2003 to 2012. By using a semi-quantitative methodology, likelihood and severity were evaluated based on the actual distribution of accident mechanisms in each of the tasks. Accident mechanisms and tasks were identified by using those variables included in the European Statistics of Accidents at Work methodology. As main results, the estimated risk of the most frequent accident mechanisms identified for each of the analysed tasks is low and the only accident mechanisms with medium risk are accidents when lifting or pushing with physical stress on the musculoskeletal system in tasks involving carrying, and impacts against objects after slipping or stumbling for tasks involving movements. The prioritisation of public preventive actions for the accident mechanisms with a higher estimated risk is highly recommended.

  14. The Analysis of the Contribution of Human Factors to the In-Flight Loss of Control Accidents

    NASA Technical Reports Server (NTRS)

    Ancel, Ersin; Shih, Ann T.

    2012-01-01

    In-flight loss of control (LOC) is currently the leading cause of fatal accidents based on various commercial aircraft accident statistics. As the Next Generation Air Transportation System (NextGen) emerges, new contributing factors leading to LOC are anticipated. The NASA Aviation Safety Program (AvSP), along with other aviation agencies and communities are actively developing safety products to mitigate the LOC risk. This paper discusses the approach used to construct a generic integrated LOC accident framework (LOCAF) model based on a detailed review of LOC accidents over the past two decades. The LOCAF model is comprised of causal factors from the domain of human factors, aircraft system component failures, and atmospheric environment. The multiple interdependent causal factors are expressed in an Object-Oriented Bayesian belief network. In addition to predicting the likelihood of LOC accident occurrence, the system-level integrated LOCAF model is able to evaluate the impact of new safety technology products developed in AvSP. This provides valuable information to decision makers in strategizing NASA's aviation safety technology portfolio. The focus of this paper is on the analysis of human causal factors in the model, including the contributions from flight crew and maintenance workers. The Human Factors Analysis and Classification System (HFACS) taxonomy was used to develop human related causal factors. The preliminary results from the baseline LOCAF model are also presented.

  15. 49 CFR 801.32 - Accident reports.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Accident reports. 801.32 Section 801.32... PUBLIC AVAILABILITY OF INFORMATION Accident Investigation Records § 801.32 Accident reports. (a) The NTSB....S. civil transportation accidents, in accordance with 49 U.S.C. 1131(e). (b) These reports may...

  16. 32 CFR 644.532 - Reporting accidents.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 4 2012-07-01 2011-07-01 true Reporting accidents. 644.532 Section 644.532... and Improvements § 644.532 Reporting accidents. Immediately upon receipt of information of an accident... that an accident has occurred, the former using command should be requested to send qualified...

  17. 49 CFR 230.22 - Accident reports.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Accident reports. 230.22 Section 230.22... Requirements § 230.22 Accident reports. In the case of an accident due to failure, from any cause, of a steam... persons, the railroad on whose line the accident occurred shall immediately make a telephone report of...

  18. 49 CFR 230.22 - Accident reports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Accident reports. 230.22 Section 230.22... Requirements § 230.22 Accident reports. In the case of an accident due to failure, from any cause, of a steam... persons, the railroad on whose line the accident occurred shall immediately make a telephone report of...

  19. 49 CFR 195.54 - Accident reports.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Accident reports. 195.54 Section 195.54... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.54 Accident reports. (a) Each operator that experiences an accident that is required to be reported under § 195.50 must, as soon...

  20. 32 CFR 644.532 - Reporting accidents.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 4 2014-07-01 2013-07-01 true Reporting accidents. 644.532 Section 644.532... and Improvements § 644.532 Reporting accidents. Immediately upon receipt of information of an accident... that an accident has occurred, the former using command should be requested to send qualified...

  1. 29 CFR 1960.29 - Accident investigation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Accident investigation. 1960.29 Section 1960.29 Labor... MATTERS Inspection and Abatement § 1960.29 Accident investigation. (a) While all accidents should be investigated, including accidents involving property damage only, the extent of such investigation shall...

  2. 49 CFR 801.32 - Accident reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Accident reports. 801.32 Section 801.32... PUBLIC AVAILABILITY OF INFORMATION Accident Investigation Records § 801.32 Accident reports. (a) The NTSB....S. civil transportation accidents, in accordance with 49 U.S.C. 1131(e). (b) These reports may...

  3. 49 CFR 845.40 - Accident report.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Accident report. 845.40 Section 845.40... RULES OF PRACTICE IN TRANSPORTATION; ACCIDENT/INCIDENT HEARINGS AND REPORTS Board Reports § 845.40 Accident report. (a) The Board will issue a detailed narrative accident report in connection with...

  4. 49 CFR 845.40 - Accident report.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Accident report. 845.40 Section 845.40... RULES OF PRACTICE IN TRANSPORTATION; ACCIDENT/INCIDENT HEARINGS AND REPORTS Board Reports § 845.40 Accident report. (a) The Board will issue a detailed narrative accident report in connection with...

  5. 49 CFR 801.32 - Accident reports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Accident reports. 801.32 Section 801.32... PUBLIC AVAILABILITY OF INFORMATION Accident Investigation Records § 801.32 Accident reports. (a) The NTSB....S. civil transportation accidents, in accordance with 49 U.S.C. 1131(e). (b) These reports may...

  6. 49 CFR 195.54 - Accident reports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Accident reports. 195.54 Section 195.54... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.54 Accident reports. (a) Each operator that experiences an accident that is required to be reported under § 195.50 must, as soon...

  7. 49 CFR 230.22 - Accident reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Accident reports. 230.22 Section 230.22... Requirements § 230.22 Accident reports. In the case of an accident due to failure, from any cause, of a steam... persons, the railroad on whose line the accident occurred shall immediately make a telephone report of...

  8. 22 CFR 102.8 - Reporting accidents.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Reporting accidents. 102.8 Section 102.8... Accidents Abroad § 102.8 Reporting accidents. (a) To airline and Civil Aeronautics Administration... probably be the first to be informed of the accident, in which event he will be expected to report...

  9. 29 CFR 1960.29 - Accident investigation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 9 2013-07-01 2013-07-01 false Accident investigation. 1960.29 Section 1960.29 Labor... MATTERS Inspection and Abatement § 1960.29 Accident investigation. (a) While all accidents should be investigated, including accidents involving property damage only, the extent of such investigation shall...

  10. 49 CFR 230.22 - Accident reports.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Accident reports. 230.22 Section 230.22... Requirements § 230.22 Accident reports. In the case of an accident due to failure, from any cause, of a steam... persons, the railroad on whose line the accident occurred shall immediately make a telephone report of...

  11. 29 CFR 1960.29 - Accident investigation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 9 2011-07-01 2011-07-01 false Accident investigation. 1960.29 Section 1960.29 Labor... MATTERS Inspection and Abatement § 1960.29 Accident investigation. (a) While all accidents should be investigated, including accidents involving property damage only, the extent of such investigation shall...

  12. 22 CFR 102.8 - Reporting accidents.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Reporting accidents. 102.8 Section 102.8... Accidents Abroad § 102.8 Reporting accidents. (a) To airline and Civil Aeronautics Administration... probably be the first to be informed of the accident, in which event he will be expected to report...

  13. 49 CFR 195.54 - Accident reports.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Accident reports. 195.54 Section 195.54... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.54 Accident reports. (a) Each operator that experiences an accident that is required to be reported under § 195.50 must, as soon...

  14. 49 CFR 845.40 - Accident report.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Accident report. 845.40 Section 845.40... RULES OF PRACTICE IN TRANSPORTATION; ACCIDENT/INCIDENT HEARINGS AND REPORTS Board Reports § 845.40 Accident report. (a) The Board will issue a detailed narrative accident report in connection with...

  15. 49 CFR 195.54 - Accident reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Accident reports. 195.54 Section 195.54... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.54 Accident reports. (a) Each operator that experiences an accident that is required to be reported under § 195.50 shall as soon...

  16. 22 CFR 102.8 - Reporting accidents.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Reporting accidents. 102.8 Section 102.8... Accidents Abroad § 102.8 Reporting accidents. (a) To airline and Civil Aeronautics Administration... probably be the first to be informed of the accident, in which event he will be expected to report...

  17. 49 CFR 801.32 - Accident reports.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Accident reports. 801.32 Section 801.32... PUBLIC AVAILABILITY OF INFORMATION Accident Investigation Records § 801.32 Accident reports. (a) The NTSB....S. civil transportation accidents, in accordance with 49 U.S.C. 1131(e). (b) These reports may...

  18. 49 CFR 195.54 - Accident reports.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Accident reports. 195.54 Section 195.54... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.54 Accident reports. (a) Each operator that experiences an accident that is required to be reported under § 195.50 must, as soon...

  19. 49 CFR 845.40 - Accident report.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Accident report. 845.40 Section 845.40... RULES OF PRACTICE IN TRANSPORTATION; ACCIDENT/INCIDENT HEARINGS AND REPORTS Board Reports § 845.40 Accident report. (a) The Board will issue a detailed narrative accident report in connection with...

  20. 49 CFR 845.40 - Accident report.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Accident report. 845.40 Section 845.40... RULES OF PRACTICE IN TRANSPORTATION; ACCIDENT/INCIDENT HEARINGS AND REPORTS Board Reports § 845.40 Accident report. (a) The Board will issue a detailed narrative accident report in connection with...

  1. 32 CFR 644.532 - Reporting accidents.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 4 2013-07-01 2013-07-01 false Reporting accidents. 644.532 Section 644.532... and Improvements § 644.532 Reporting accidents. Immediately upon receipt of information of an accident... that an accident has occurred, the former using command should be requested to send qualified...

  2. 29 CFR 1960.29 - Accident investigation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 9 2014-07-01 2014-07-01 false Accident investigation. 1960.29 Section 1960.29 Labor... MATTERS Inspection and Abatement § 1960.29 Accident investigation. (a) While all accidents should be investigated, including accidents involving property damage only, the extent of such investigation shall...

  3. 29 CFR 1960.29 - Accident investigation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 9 2012-07-01 2012-07-01 false Accident investigation. 1960.29 Section 1960.29 Labor... MATTERS Inspection and Abatement § 1960.29 Accident investigation. (a) While all accidents should be investigated, including accidents involving property damage only, the extent of such investigation shall...

  4. 49 CFR 230.22 - Accident reports.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Accident reports. 230.22 Section 230.22... Requirements § 230.22 Accident reports. In the case of an accident due to failure, from any cause, of a steam... persons, the railroad on whose line the accident occurred shall immediately make a telephone report of...

  5. 22 CFR 102.8 - Reporting accidents.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Reporting accidents. 102.8 Section 102.8... Accidents Abroad § 102.8 Reporting accidents. (a) To airline and Civil Aeronautics Administration... probably be the first to be informed of the accident, in which event he will be expected to report...

  6. 22 CFR 102.8 - Reporting accidents.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Reporting accidents. 102.8 Section 102.8... Accidents Abroad § 102.8 Reporting accidents. (a) To airline and Civil Aeronautics Administration... probably be the first to be informed of the accident, in which event he will be expected to report...

  7. 49 CFR 801.32 - Accident reports.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Accident reports. 801.32 Section 801.32... PUBLIC AVAILABILITY OF INFORMATION Accident Investigation Records § 801.32 Accident reports. (a) The NTSB....S. civil transportation accidents, in accordance with 49 U.S.C. 1131(e). (b) These reports may...

  8. Analysis of traffic accident size for Korean highway using structural equation models.

    PubMed

    Lee, Ju-Yeon; Chung, Jin-Hyuk; Son, Bongsoo

    2008-11-01

    Accident size can be expressed as the number of involved vehicles, the number of damaged vehicles, the number of deaths and/or the number of injured. Accident size is the one of the important indices to measure the level of safety of transportation facilities. Factors such as road geometric condition, driver characteristic and vehicle type may be related to traffic accident size. However, all these factors interact in complicate ways so that the interrelationships among the variables are not easily identified. A structural equation model is adopted to capture the complex relationships among variables because the model can handle complex relationships among endogenous and exogenous variables simultaneously and furthermore it can include latent variables in the model. In this study, we use 2649 accident data occurred on highways in Korea and estimate relationship among exogenous factors and traffic accident size. The model suggests that road factors, driver factors and environment factors are strongly related to the accident size.

  9. System analysis with improved thermo-mechanical fuel rod models for modeling current and advanced LWR materials in accident scenarios

    NASA Astrophysics Data System (ADS)

    Porter, Ian Edward

    A nuclear reactor systems code has the ability to model the system response in an accident scenario based on known initial conditions at the onset of the transient. However, there has been a tendency for these codes to lack the detailed thermo-mechanical fuel rod response models needed for accurate prediction of fuel rod failure. This proposed work will couple today's most widely used steady-state (FRAPCON) and transient (FRAPTRAN) fuel rod models with a systems code TRACE for best-estimate modeling of system response in accident scenarios such as a loss of coolant accident (LOCA). In doing so, code modifications will be made to model gamma heating in LWRs during steady-state and accident conditions and to improve fuel rod thermal/mechanical analysis by allowing axial nodalization of burnup-dependent phenomena such as swelling, cladding creep and oxidation. With the ability to model both burnup-dependent parameters and transient fuel rod response, a fuel dispersal study will be conducted using a hypothetical accident scenario under both PWR and BWR conditions to determine the amount of fuel dispersed under varying conditions. Due to the fuel fragmentation size and internal rod pressure both being dependent on burnup, this analysis will be conducted at beginning, middle and end of cycle to examine the effects that cycle time can play on fuel rod failure and dispersal. Current fuel rod and system codes used by the Nuclear Regulatory Commission (NRC) are compilations of legacy codes with only commonly used light water reactor materials, Uranium Dioxide (UO2), Mixed Oxide (U/PuO 2) and zirconium alloys. However, the events at Fukushima Daiichi and Three Mile Island accident have shown the need for exploration into advanced materials possessing improved accident tolerance. This work looks to further modify the NRC codes to include silicon carbide (SiC), an advanced cladding material proposed by current DOE funded research on accident tolerant fuels (ATF). Several

  10. Multifractal analysis of the 137Cs fallout pattern in Austria resulting from the Chernobyl accident.

    PubMed

    Pausch, G; Bossew, P; Hofmann, W; Steger, F

    1998-06-01

    The cumulative deposition of the 137Cs fallout in Austria resulting from the passage of the Chernobyl cloud has been investigated by applying correlation dimension and hyperbolic frequency distribution methods. For the analysis, a total of 1,881 deposition values were used, which were collected by the Federal Environmental Agency of Austria and the Federal Ministry of Health, representing all available measurements of 137Cs in soil made in Austria after the Chernobyl accident. From these data a hyperbolic exponent for the frequency distribution of 4.0 and a set of fractal correlation dimensions, which decrease from 1.426 +/- 0.022 (for the whole network) to 0.706 +/- 0.047 (for 137Cs values > or = 100 kBq m(-2)), were derived, thus confirming that the fallout pattern can be described as a multifractal.

  11. PTSD symptom severity and psychiatric comorbidity in recent motor vehicle accident victims: a latent class analysis.

    PubMed

    Hruska, Bryce; Irish, Leah A; Pacella, Maria L; Sledjeski, Eve M; Delahanty, Douglas L

    2014-10-01

    We conducted a latent class analysis (LCA) on 249 recent motor vehicle accident (MVA) victims to examine subgroups that differed in posttraumatic stress disorder (PTSD) symptom severity, current major depressive disorder and alcohol/other drug use disorders (MDD/AoDs), gender, and interpersonal trauma history 6-weeks post-MVA. A 4-class model best fit the data with a resilient class displaying asymptomatic PTSD symptom levels/low levels of comorbid disorders; a mild psychopathology class displaying mild PTSD symptom severity and current MDD; a moderate psychopathology class displaying severe PTSD symptom severity and current MDD/AoDs; and a severe psychopathology class displaying extreme PTSD symptom severity and current MDD. Classes also differed with respect to gender composition and history of interpersonal trauma experience. These findings may aid in the development of targeted interventions for recent MVA victims through the identification of subgroups distinguished by different patterns of psychiatric problems experienced 6-weeks post-MVA.

  12. Surgical videos for accident analysis, performance improvement, and complication prevention: time for a surgical black box?

    PubMed

    Gambadauro, Pietro; Magos, Adam

    2012-03-01

    Conventional audit of surgical records through review of surgical results provides useful knowledge but hardly helps identify the technical reasons lying behind specific outcomes or complications. Surgical teams not only need to know that a complication might happen but also how and when it is most likely to happen. Functional awareness is therefore needed to prevent complications, know how to deal with them, and improve overall surgical performance. The authors wish to argue that the systematic recording and reviewing of surgical videos, a "surgical black box," might improve surgical care, help prevent complications, and allow accident analysis. A possible strategy to test this hypothesis is presented and discussed. Recording and reviewing surgical interventions, apart from helping us achieve functional awareness and increasing the safety profile of our performance, allows us also to effectively share our experience with colleagues. The authors believe that those potential implications make this hypothesis worth testing.

  13. Accident safety analysis for 300 Area N Reactor Fuel Fabrication and Storage Facility

    SciTech Connect

    Johnson, D.J.; Brehm, J.R.

    1994-01-01

    The purpose of the accident safety analysis is to identify and analyze a range of credible events, their cause and consequences, and to provide technical justification for the conclusion that uranium billets, fuel assemblies, uranium scrap, and chips and fines drums can be safely stored in the 300 Area N Reactor Fuel Fabrication and Storage Facility, the contaminated equipment, High-Efficiency Air Particulate filters, ductwork, stacks, sewers and sumps can be cleaned (decontaminated) and/or removed, the new concretion process in the 304 Building will be able to operate, without undue risk to the public, employees, or the environment, and limited fuel handling and packaging associated with removal of stored uranium is acceptable.

  14. A comparative analysis of accident risks in fossil, hydro, and nuclear energy chains

    SciTech Connect

    Burgherr, P.; Hirschberg, S.

    2008-07-01

    This study presents a comparative assessment of severe accident risks in the energy sector, based on the historical experience of fossil (coal, oil, natural gas, and LPG (Liquefied Petroleum Gas)) and hydro chains contained in the comprehensive Energy-related Severe Accident Database (ENSAD), as well as Probabilistic Safety Assessment (PSA) for the nuclear chain. Full energy chains were considered because accidents can take place at every stage of the chain. Comparative analyses for the years 1969-2000 included a total of 1870 severe ({>=} 5 fatalities) accidents, amounting to 81,258 fatalities. Although 79.1% of all accidents and 88.9% of associated fatalities occurred in less developed, non-OECD countries, industrialized OECD countries dominated insured losses (78.0%), reflecting their substantially higher insurance density and stricter safety regulations. Aggregated indicators and frequency-consequence (F-N) curves showed that energy-related accident risks in non-OECD countries are distinctly higher than in OECD countries. Hydropower in non-OECD countries and upstream stages within fossil energy chains are most accident-prone. Expected fatality rates are lowest for Western hydropower and nuclear power plants; however, the maximum credible consequences can be very large. Total economic damages due to severe accidents are substantial, but small when compared with natural disasters. Similarly, external costs associated with severe accidents are generally much smaller than monetized damages caused by air pollution.

  15. Final safety analysis report for the Galileo Mission: Volume 2: Book 1, Accident model document

    SciTech Connect

    Not Available

    1988-12-15

    The Accident Model Document (AMD) is the second volume of the three volume Final Safety Analysis Report (FSAR) for the Galileo outer planetary space science mission. This mission employs Radioisotope Thermoelectric Generators (RTGs) as the prime electrical power sources for the spacecraft. Galileo will be launched into Earth orbit using the Space Shuttle and will use the Inertial Upper Stage (IUS) booster to place the spacecraft into an Earth escape trajectory. The RTG's employ silicon-germanium thermoelectric couples to produce electricity from the heat energy that results from the decay of the radioisotope fuel, Plutonium-238, used in the RTG heat source. The heat source configuration used in the RTG's is termed General Purpose Heat Source (GPHS), and the RTG's are designated GPHS-RTGs. The use of radioactive material in these missions necessitates evaluations of the radiological risks that may be encountered by launch complex personnel as well as by the Earth's general population resulting from postulated malfunctions or failures occurring in the mission operations. The FSAR presents the results of a rigorous safety assessment, including substantial analyses and testing, of the launch and deployment of the RTGs for the Galileo mission. This AMD is a summary of the potential accident and failure sequences which might result in fuel release, the analysis and testing methods employed, and the predicted source terms. Each source term consists of a quantity of fuel released, the location of release and the physical characteristics of the fuel released. Each source term has an associated probability of occurrence. 27 figs., 11 tabs.

  16. Probabilistic accident consequence uncertainty analysis: Dispersion and deposition uncertainty assessment, appendices A and B

    SciTech Connect

    Harper, F.T.; Young, M.L.; Miller, L.A.; Hora, S.C.; Lui, C.H.; Goossens, L.H.J.; Cooke, R.M.; Paesler-Sauer, J.; Helton, J.C.

    1995-01-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, completed in 1990, estimate the risks presented by nuclear installations based on postulated frequencies and magnitudes of potential accidents. In 1991, the US Nuclear Regulatory Commission (NRC) and the Commission of the European Communities (CEC) began a joint uncertainty analysis of the two codes. The objective was to develop credible and traceable uncertainty distributions for the input variables of the codes. Expert elicitation, developed independently, was identified as the best technology available for developing a library of uncertainty distributions for the selected consequence parameters. The study was formulated jointly and was limited to the current code models and to physical quantities that could be measured in experiments. To validate the distributions generated for the wet deposition input variables, samples were taken from these distributions and propagated through the wet deposition code model along with the Gaussian plume model (GPM) implemented in the MACCS and COSYMA codes. Resulting distributions closely replicated the aggregated elicited wet deposition distributions. Project teams from the NRC and CEC cooperated successfully to develop and implement a unified process for the elaboration of uncertainty distributions on consequence code input parameters. Formal expert judgment elicitation proved valuable for synthesizing the best available information. Distributions on measurable atmospheric dispersion and deposition parameters were successfully elicited from experts involved in the many phenomenological areas of consequence analysis. This volume is the second of a three-volume document describing the project and contains two appendices describing the rationales for the dispersion and deposition data along with short biographies of the 16 experts who participated in the project.

  17. Probabilistic accident consequence uncertainty analysis: Dispersion and deposition uncertainty assessment, main report

    SciTech Connect

    Harper, F.T.; Young, M.L.; Miller, L.A.; Hora, S.C.; Lui, C.H.; Goossens, L.H.J.; Cooke, R.M.; Paesler-Sauer, J.; Helton, J.C.

    1995-01-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the risks presented by nuclear installations based on postulated frequencies and magnitudes of potential accidents. In 1991, the US Nuclear Regulatory Commission (NRC) and the Commission of the European Communities (CEC) began a joint uncertainty analysis of the two codes. The ultimate objective of the joint effort was to develop credible and traceable uncertainty distributions for the input variables of the codes. Expert elicitation was identified as the best technology available for developing a library of uncertainty distributions for the selected consequence parameters. The study was formulated jointly and was limited to the current code models and to physical quantities that could be measured in experiments. Experts developed their distributions independently. To validate the distributions generated for the wet deposition input variables, samples were taken from these distributions and propagated through the wet deposition code model. Resulting distributions closely replicated the aggregated elicited wet deposition distributions. To validate the distributions generated for the dispersion code input variables, samples from the distributions and propagated through the Gaussian plume model (GPM) implemented in the MACCS and COSYMA codes. Project teams from the NRC and CEC cooperated successfully to develop and implement a unified process for the elaboration of uncertainty distributions on consequence code input parameters. Formal expert judgment elicitation proved valuable for synthesizing the best available information. Distributions on measurable atmospheric dispersion and deposition parameters were successfully elicited from experts involved in the many phenomenological areas of consequence analysis. This volume is the first of a three-volume document describing the project.

  18. Who by accident? The social morphology of car accidents.

    PubMed

    Factor, Roni; Yair, Gad; Mahalel, David

    2010-09-01

    Prior studies in the sociology of accidents have shown that different social groups have different rates of accident involvement. This study extends those studies by implementing Bourdieu's relational perspective of social space to systematically explore the homology between drivers' social characteristics and their involvement in specific types of motor vehicle accident. Using a large database that merges official Israeli road-accident records with socioeconomic data from two censuses, this research maps the social order of road accidents through multiple correspondence analysis. Extending prior studies, the results show that different social groups indeed tend to be involved in motor vehicle accidents of different types and severity. For example, we find that drivers from low socioeconomic backgrounds are overinvolved in severe accidents with fatal outcomes. The new findings reported here shed light on the social regularity of road accidents and expose new facets in the social organization of death.

  19. Defense In-Depth Accident Analysis Evaluation of Tritium Facility Bldgs. 232-H, 233-H, and 234-H

    SciTech Connect

    Blanchard, A.

    1999-05-10

    'The primary purpose of this report is to document a Defense-in-Depth (DID) accident analysis evaluation for Department of Energy (DOE) Savannah River Site (SRS) Tritium Facility Buildings 232-H, 233-H, and 234-H. The purpose of a DID evaluation is to provide a more realistic view of facility radiological risks to the offsite public than the bounding deterministic analysis documented in the Safety Analysis Report, which credits only Safety Class items in the offsite dose evaluation.'

  20. [Analysis of accidents for magnetically induced displacement of the large ferromagnetic material in magnetic resonance systems].

    PubMed

    Yamatani, Yuya; Doi, Tsukasa; Ueyama, Tsuyoshi; Nishiki, Shigeo; Ogura, Akio; Kawamitsu, Hideaki; Tsuchihashi, Toshio; Okuaki, Tomoyuki; Matsuda, Tsuyoshi

    2013-01-01

    To improve magnetic resonance (MR) safety, we surveyed the accidents caused by large ferromagnetic materials brought into MR systems accidentally. We sent a questionnaire to 700 Japanese medical institutions and received 405 valid responses (58%). A total of 97 accidents in 77 institutions were observed and we analyzed them regarding incidental rate, the detail situation and environmental factors. The mean accident rate of each institute was 0.7/100,000 examinations, which was widely distributed (0-25.6/100,000) depending on the institute. In this survey, relatively small institutes with less than 500 beds tend to have these accidents more frequently (p<0.01). The institutes in which daily MR examination counts are more than 10 patients have fewer accidents than those with less than 10 daily examinations. The institutes with 6-10 MR examinations daily have significantly more accidents than that with more than 10 daily MR examinations (p<0.01). The main mental factors of the accidents were considered to be "prejudice" and "carelessness" but some advocate "ignorance." Though we could not find significant reduction in the institutes that have lectures and training for MR safety, we should continue lectures and training for MR safety to reduce accidents due to "ignorance."

  1. Emergency drinking water treatment during source water pollution accidents in China: origin analysis, framework and technologies.

    PubMed

    Zhang, Xiao-Jian; Chen, Chao; Lin, Peng-Fei; Hou, Ai-Xin; Niu, Zhang-Bin; Wang, Jun

    2011-01-01

    China has suffered frequent source water contamination accidents in the past decade, which has resulted in severe consequences to the water supply of millions of residents. The origins of typical cases of contamination are discussed in this paper as well as the emergency response to these accidents. In general, excessive pursuit of rapid industrialization and the unreasonable location of factories are responsible for the increasing frequency of accidental pollution events. Moreover, insufficient attention to environmental protection and rudimentary emergency response capability has exacerbated the consequences of such accidents. These environmental accidents triggered or accelerated the promulgation of stricter environmental protection policy and the shift from economic development mode to a more sustainable direction, which should be regarded as the turning point of environmental protection in China. To guarantee water security, China is trying to establish a rapid and effective emergency response framework, build up the capability of early accident detection, and develop efficient technologies to remove contaminants from water.

  2. A multivariate tobit analysis of highway accident-injury-severity rates.

    PubMed

    Anastasopoulos, Panagiotis Ch; Shankar, Venky N; Haddock, John E; Mannering, Fred L

    2012-03-01

    Relatively recent research has illustrated the potential that tobit regression has in studying factors that affect vehicle accident rates (accidents per distance traveled) on specific roadway segments. Tobit regression has been used because accident rates on specific roadway segments are continuous data that are left-censored at zero (they are censored because accidents may not be observed on all roadway segments during the period over which data are collected). This censoring may arise from a number of sources, one of which being the possibility that less severe crashes may be under-reported and thus may be less likely to appear in crash databases. Traditional tobit-regression analyses have dealt with the overall accident rate (all crashes regardless of injury severity), so the issue of censoring by the severity of crashes has not been addressed. However, a tobit-regression approach that considers accident rates by injury-severity level, such as the rate of no-injury, possible injury and injury accidents per distance traveled (as opposed to all accidents regardless of injury-severity), can potentially provide new insights, and address the possibility that censoring may vary by crash-injury severity. Using five-year data from highways in Washington State, this paper estimates a multivariate tobit model of accident-injury-severity rates that addresses the possibility of differential censoring across injury-severity levels, while also accounting for the possible contemporaneous error correlation resulting from commonly shared unobserved characteristics across roadway segments. The empirical results show that the multivariate tobit model outperforms its univariate counterpart, is practically equivalent to the multivariate negative binomial model, and has the potential to provide a fuller understanding of the factors determining accident-injury-severity rates on specific roadway segments.

  3. Analysis of fission product revaporization in a BWR Reactor Coolant System during a station blackout accident

    SciTech Connect

    Yang, J.W.; Schmidt, E.; Cazzoli, E.; Khatib-Rahbar, M.

    1988-01-01

    This paper presents an analysis of fission product revaporization from the Reactor Coolant System (RCS) following the Reactor Pressure Vessel (RPV) failure. The station blackout accident in a BWR Mark I Power Plant was considered. The TRAPMELT3 models for vaporization, chemisorption, and the decay heating of RCS structures and gases were used and extended beyond the RPV failure in the analysis. The RCS flow models based on the density-difference or pressure-difference between the RCS and containment pedestal region were developed to estimate the RCS outflow which carries the revaporized fission product to the containment. A computer code called REVAP was developed for the analysis. The REVAP code was incorporated with the MARCH, TRAPMELT3 and NAUA codes from the Source Term Code Package (STCP) to estimate the impact of revaporization on environmental release. The results show that the thermal-hydraulic conditions between the RCS and the pedestal region are important factors in determining the magnitude of revaporization and subsequent release of the volatile fission product into the environment. 6 refs., 8 figs.

  4. Analysis of the Loss of Forced Reactor Coolant Flow Accident in SMART using RETRAN-03/INT

    SciTech Connect

    Kim, Tae-Wan; Suh, Kune-Yull; Lee, Un-Chul; Park, Goon-Cherl; Kim, Jae-Hak

    2002-07-01

    Small and medium integral type nuclear reactors are getting much attention for the peaceful use of nuclear energy in non-electric area such as district heating, seawater desalination and ship propulsion. An integral type nuclear co-generation reactor, SMART(System-integrated Modular Advanced ReacTor, 330 MWt), has been developed by KAERI (Korea Atomic Energy Research Institute) since 1996. In this study, the safety analysis for SMART using modified RETRAN-03 code whose name is RETRAN-03/INT is performed to examine the applicability of RETRAN-03/INT code. For the safety analysis of integral reactor with helical-coiled steam generators, RETRAN-03 code has been modified and verified using experimental results. New heat transfer coefficients are added for helical-coiled steam generator. And, the heat transfer model for steam generator is modified due to the different primary and secondary side heat flow from U-tube type steam generator. The loss of forced reactor coolant flow accident is selected for safety analysis in this study. Also it is considered as a single failure that one of three trains of passive residual heat removal system is failed. The results from MARS/SMR code and RETRAN-03/INT code are compared. (authors)

  5. TRACE/PARCS Core Modeling of a BWR/5 for Accident Analysis of ATWS Events

    SciTech Connect

    Cuadra A.; Baek J.; Cheng, L.; Aronson, A.; Diamond, D.; Yarsky, P.

    2013-11-10

    The TRACE/PARCS computational package [1, 2] isdesigned to be applicable to the analysis of light water reactor operational transients and accidents where the coupling between the neutron kinetics (PARCS) and the thermal-hydraulics and thermal-mechanics (TRACE) is important. TRACE/PARCS has been assessed for itsapplicability to anticipated transients without scram(ATWS) [3]. The challenge, addressed in this study, is to develop a sufficiently rigorous input model that would be acceptable for use in ATWS analysis. Two types of ATWS events were of interest, a turbine trip and a closure of main steam isolation valves (MSIVs). In the first type, initiated by turbine trip, the concern is that the core will become unstable and large power oscillations will occur. In the second type,initiated by MSIV closure,, the concern is the amount of energy being placed into containment and the resulting emergency depressurization. Two separate TRACE/PARCS models of a BWR/5 were developed to analyze these ATWS events at MELLLA+ (maximum extended load line limit plus)operating conditions. One model [4] was used for analysis of ATWS events leading to instability (ATWS-I);the other [5] for ATWS events leading to emergency depressurization (ATWS-ED). Both models included a large portion of the nuclear steam supply system and controls, and a detailed core model, presented henceforth.

  6. Analysis of Surface Water Pollution Accidents in China: Characteristics and Lessons for Risk Management

    NASA Astrophysics Data System (ADS)

    Yao, Hong; Zhang, Tongzhu; Liu, Bo; Lu, Feng; Fang, Shurong; You, Zhen

    2016-04-01

    Understanding historical accidents is important for accident prevention and risk mitigation; however, there are no public databases of pollution accidents in China, and no detailed information regarding such incidents is readily available. Thus, 653 representative cases of surface water pollution accidents in China were identified and described as a function of time, location, materials involved, origin, and causes. The severity and other features of the accidents, frequency and quantities of chemicals involved, frequency and number of people poisoned, frequency and number of people affected, frequency and time for which pollution lasted, and frequency and length of pollution zone were effectively used to value and estimate the accumulated probabilities. The probabilities of occurrences of various types based on origin and causes were also summarized based on these observations. The following conclusions can be drawn from these analyses: (1) There was a high proportion of accidents involving multi-district boundary regions and drinking water crises, indicating that more attention should be paid to environmental risk prevention and the mitigation of such incidents. (2) A high proportion of accidents originated from small-sized chemical plants, indicating that these types of enterprises should be considered during policy making. (3) The most common cause (49.8 % of the total) was intentional acts (illegal discharge); accordingly, efforts to increase environmental consciousness in China should be enhanced.

  7. Analysis of Surface Water Pollution Accidents in China: Characteristics and Lessons for Risk Management.

    PubMed

    Yao, Hong; Zhang, Tongzhu; Liu, Bo; Lu, Feng; Fang, Shurong; You, Zhen

    2016-04-01

    Understanding historical accidents is important for accident prevention and risk mitigation; however, there are no public databases of pollution accidents in China, and no detailed information regarding such incidents is readily available. Thus, 653 representative cases of surface water pollution accidents in China were identified and described as a function of time, location, materials involved, origin, and causes. The severity and other features of the accidents, frequency and quantities of chemicals involved, frequency and number of people poisoned, frequency and number of people affected, frequency and time for which pollution lasted, and frequency and length of pollution zone were effectively used to value and estimate the accumulated probabilities. The probabilities of occurrences of various types based on origin and causes were also summarized based on these observations. The following conclusions can be drawn from these analyses: (1) There was a high proportion of accidents involving multi-district boundary regions and drinking water crises, indicating that more attention should be paid to environmental risk prevention and the mitigation of such incidents. (2) A high proportion of accidents originated from small-sized chemical plants, indicating that these types of enterprises should be considered during policy making. (3) The most common cause (49.8% of the total) was intentional acts (illegal discharge); accordingly, efforts to increase environmental consciousness in China should be enhanced.

  8. 49 CFR 655.44 - Post-accident testing.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Post-accident testing. 655.44 Section 655.44... of Testing § 655.44 Post-accident testing. (a) Accidents. (1) Fatal accidents. (i) As soon as practicable following an accident involving the loss of human life, an employer shall conduct drug and...

  9. 22 CFR 102.17 - Reports on accident.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Reports on accident. 102.17 Section 102.17... Accidents Abroad Foreign Aircraft Accidents Involving United States Persons Or Property § 102.17 Reports on accident. When an accident occurs to a foreign aircraft in the district of a Foreign Service post...

  10. 22 CFR 102.17 - Reports on accident.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Reports on accident. 102.17 Section 102.17... Accidents Abroad Foreign Aircraft Accidents Involving United States Persons Or Property § 102.17 Reports on accident. When an accident occurs to a foreign aircraft in the district of a Foreign Service post...

  11. 22 CFR 102.17 - Reports on accident.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Reports on accident. 102.17 Section 102.17... Accidents Abroad Foreign Aircraft Accidents Involving United States Persons Or Property § 102.17 Reports on accident. When an accident occurs to a foreign aircraft in the district of a Foreign Service post...

  12. 49 CFR 655.44 - Post-accident testing.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Post-accident testing. 655.44 Section 655.44... of Testing § 655.44 Post-accident testing. (a) Accidents. (1) Fatal accidents. (i) As soon as practicable following an accident involving the loss of human life, an employer shall conduct drug and...

  13. 22 CFR 102.17 - Reports on accident.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Reports on accident. 102.17 Section 102.17... Accidents Abroad Foreign Aircraft Accidents Involving United States Persons Or Property § 102.17 Reports on accident. When an accident occurs to a foreign aircraft in the district of a Foreign Service post...

  14. 22 CFR 102.17 - Reports on accident.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Reports on accident. 102.17 Section 102.17... Accidents Abroad Foreign Aircraft Accidents Involving United States Persons Or Property § 102.17 Reports on accident. When an accident occurs to a foreign aircraft in the district of a Foreign Service post...

  15. The effect of gamma-ray transport on afterheat calculations for accident analysis

    SciTech Connect

    Reyes, S.; Latkowski, J.F.; Sanz, J.

    2000-05-01

    Radioactive afterheat is an important source term for the release of radionuclides in fusion systems under accident conditions. Heat transfer calculations are used to determine time-temperature histories in regions of interest, but the true source term needs to be the effective afterheat, which considers the transport of penetrating gamma rays. Without consideration of photon transport, accident temperatures may be overestimated in others. The importance of this effect is demonstrated for a simple, one-dimensional problem. The significance of this effect depends strongly on the accident scenario being analyzed.

  16. Overview of the Aerothermodynamics Analysis Conducted in Support of the STS-107 Accident Investigation

    NASA Technical Reports Server (NTRS)

    Campbell, Charles H.

    2004-01-01

    A graphic presentation of the aerothermodynamics analysis conducted in support of the STS-107 accident investigation. Investigation efforts were conducted as part of an integrated AATS team (Aero, Aerothermal, Thermal, Stress) directed by OVEWG. Graphics presented are: STS-107 Entry trajectory and timeline (1st off-nominal event to Post-LOS); Indications from OI telemetry data; Aero/aerothermo/thermal analysis process; Selected STS-107 side fuselage/OMS pod off-nominal temperatures; Leading edge structural subsystem; Relevant forensics evidence; External aerothermal environments; STS-107 Pre-entry EOM3 heating profile; Surface heating and temperatures; Orbiter wing leading edge damage survey; Internal aerothermal environments; Orbiter wing CAD model; Aerodynamic flight reconstruction; Chronology of aerodynamic/aerothermoydynamic contributions; Acreage TPS tile damage; Larger OML perturbations; Missing RCC panel(s); Localized damage to RCC panel/missing T-seal; RCC breach with flow ingestion; and Aero-aerothermal closure. NAIT served as the interface between the CAIB and NASA investigation teams; and CAIB requests for study were addressed.

  17. Development of NASA's Accident Precursor Analysis Process Through Application on the Space Shuttle Orbiter

    NASA Technical Reports Server (NTRS)

    Maggio, Gaspare; Groen, Frank; Hamlin, Teri; Youngblood, Robert

    2010-01-01

    Accident Precursor Analysis (APA) serves as the bridge between existing risk modeling activities, which are often based on historical or generic failure statistics, and system anomalies, which provide crucial information about the failure mechanisms that are actually operative in the system. APA docs more than simply track experience: it systematically evaluates experience, looking for under-appreciated risks that may warrant changes to design or operational practice. This paper presents the pilot application of the NASA APA process to Space Shuttle Orbiter systems. In this effort, the working sessions conducted at Johnson Space Center (JSC) piloted the APA process developed by Information Systems Laboratories (ISL) over the last two years under the auspices of NASA's Office of Safety & Mission Assurance, with the assistance of the Safety & Mission Assurance (S&MA) Shuttle & Exploration Analysis Branch. This process is built around facilitated working sessions involving diverse system experts. One important aspect of this particular APA process is its focus on understanding the physical mechanism responsible for an operational anomaly, followed by evaluation of the risk significance of the observed anomaly as well as consideration of generalizations of the underlying mechanism to other contexts. Model completeness will probably always be an issue, but this process tries to leverage operating experience to the extent possible in order to address completeness issues before a catastrophe occurs.

  18. The role of mitochondrial proteomic analysis in radiological accidents and terrorism.

    PubMed

    Maguire, David; Zhang, Bingrong; Zhang, Amy; Zhang, Lurong; Okunieff, Paul

    2013-01-01

    In the wake of the 9/11 terrorist attacks and the recent Level 7 nuclear event at the Fukushima Daiichi plant, there has been heightened awareness of the possibility of radiological terrorism and accidents and the need for techniques to estimate radiation levels after such events. A number of approaches to monitoring radiation using biological markers have been published, including physical techniques, cytogenetic approaches, and direct, DNA-analysis approaches. Each approach has the potential to provide information that may be applied to the triage of an exposed population, but problems with development and application of devices or lengthy analyses limit their potential for widespread application. We present a post-irradiation observation with the potential for development into a rapid point-of-care device. Using simple mitochondrial proteomic analysis, we investigated irradiated and nonirradiated murine mitochondria and identified a protein mobility shift occurring at 2-3 Gy. We discuss the implications of this finding both in terms of possible mechanisms and potential applications in bio-radiation monitoring.

  19. Homicide or accident off the coast of Florida: trauma analysis of mutilated human remains.

    PubMed

    Stubblefield, P R

    1999-07-01

    In the many years Dr. William R. Maples served as a forensic anthropologist, he saw diverse sources of trauma presented in the victims of violent crime, accident and suicide in the state of Florida. In 1996 the District 18 Medical Examiner's Office of Florida requested the assistance of Dr. Maples in the analysis of human remains recovered by the U.S. Coast Guard. The deceased was in an advanced state of decomposition characterized by skin slippage and discoloration. The torso bore multiple lacerations, including nearly parallel lacerations in the skin of the back. Specimens were carefully macerated and the fractures reconstructed. The skeletal trauma was caused by a device capable of delivering robust cuts and blunt trauma in linear paths, as is consistent with propeller trauma. Unusual in this case were blows to the ventral and dorsal surfaces of the body. Based on the anthropological analysis and interviews with the family of the deceased, the F.B.I. proceeded with the case as a homicide investigation.

  20. Section Builder: A finite element tool for analysis and design of composite beam cross-sections

    NASA Astrophysics Data System (ADS)

    Chakravarty, Uttam Kumar

    SectionBuilder is an innovative finite element based tool, developed for analysis and design of composite beam cross-sections. The tool can handle the cross-sections with parametric shapes and arbitrary configurations. It can also handle arbitrary lay-ups for predefined beam cross-section geometries in a consistent manner. The material properties for each layer of the cross-section can be defined on the basis of the design requirements. This tool is capable of dealing with multi-cell composite cross-sections with arbitrary lay-ups. It has also the benefit of handling the variation of thickness of skin and D-spars for beams such as rotor blades. A typical cross-section is considered as a collection of interconnected walls. Walls with arbitrary lay-ups based on predefined geometries and material properties are generated first. The complex composite beam cross-sections are developed by connecting the walls using various types of connectors. These connectors are compatible with the walls, i.e., the thickness of the layers of the walls must match with those of the connectors at the place of connection. Cross-sections are often reinforced by core material for constructing realistic rotor blade cross-sections. The tool has the ability to integrate core materials into the cross-sections. A mapped mesh is considered for meshing parametric shapes, walls and various connectors, whereas a free mesh is considered for meshing the core materials. A new algorithm based on the Delaunay refinement algorithm is developed for creating the best possible free mesh for core materials. After meshing the cross-section, the tool determines the sectional properties using finite element analysis. This tool computes sectional properties including stiffness matrix, compliance matrix, mass matrix, and principal axes. A visualization environment is integrated with the tool for visualizing the stress and strain distributions over the cross-section.

  1. Lower head creep rupture failure analysis associated with alternative accident sequences of the Three Mile Island Unit 2

    SciTech Connect

    Sang Lung, Chan

    2004-07-01

    The objective of this lower head creep rupture analysis is to assess the current version of MELCOR 1.8.5-RG against SCDAP/RELAP5 MOD 3.3kz. The purpose of this assessment is to investigate the current MELCOR in-vessel core damage progression phenomena including the model for the formation of a molten pool. The model for stratified molten pool natural heat transfer will be included in the next MELCOR release. Presently, MELCOR excludes the gap heat-transfer model for the cooling associated with the narrow gap between the debris and the lower head vessel wall. All these phenomenological models are already treated in SCDAP/RELAP5 using the COUPLE code to model the heat transfer of the relocated debris with the lower head based on a two-dimensional finite-element-method. The assessment should determine if current MELCOR capabilities adequately cover core degradation phenomena appropriate for the consolidated MELCOR code. Inclusion of these features should bring MELCOR much closer to a state of parity with SCDAP/RELAP5 and is a currently underway element in the MELCOR code consolidation effort. This assessment deals with the following analysis of the Three Mile Island Unit 2 (TMI-2) alternative accident sequences. The TMI-2 alternative accident sequence-1 includes the continuation of the base case of the TMI-2 accident with the Reactor Coolant Pumps (RCP) tripped, and the High Pressure Injection System (HPIS) throttled after approximately 6000 s accident time, while in the TMI-2 alternative accident sequence-2, the reactor coolant pumps is tripped after 6000 s and the HPIS is activated after 12,012 s. The lower head temperature distributions calculated with SCDAP/RELAP5 are visualized and animated with open source visualization freeware 'OpenDX'. (author)

  2. Analysis of criticality accident alarm system coverage in the X-700, X-705, and X-720 facilities at the Portsmouth Gaseous Diffusion plant

    SciTech Connect

    Skapik, C.W.; Dobelbower, M.C.; Woollard, J.E.

    1995-12-01

    Additional services for the uranium enrichment cascade process, such as maintenance and decontamination operations, are provided by several ancillary facilities at the PORTS site. These facilities include the X-700 Maintenance Facility, the X-705 Decontamination Facility, and the X-720 Maintenance and Stores Facility. As uranium operations are performed within these facilities, the potential for a criticality accident exists. In the event of a criticality accident within one of these facilities at PORTS, a Criticality Accident Alarm System (CAAS) is in place to detect the criticality accident and sound an alarm. In this report, an analysis was performed to provide verification that the existing CAAS at PORTS provides complete criticality accident coverage in the X-700, X-705, and X-720 facilities. The analysis has determined that the X-705 and X-720 facilities have complete CAAS coverage; the X-700 facility has not been shown to have complete CAAS coverage at this time.

  3. Analysis of labour accidents in tunnel construction and introduction of prevention measures

    PubMed Central

    KIKKAWA, Naotaka; ITOH, Kazuya; HORI, Tomohito; TOYOSAWA, Yasuo; ORENSE, Rolando P.

    2015-01-01

    At present, almost all mountain tunnels in Japan are excavated and constructed utilizing the New Austrian Tunneling Method (NATM), which was advocated by Prof. Rabcewicz of Austria in 1964. In Japan, this method has been applied to tunnel construction since around 1978, after which there has been a subsequent decrease in the number of casualties during tunnel construction. However, there is still a relatively high incidence of labour accidents during tunnel construction when compared to incidence rates in the construction industry in general. During tunnel construction, rock fall events at the cutting face are a particularly characteristic of the type of accident that occurs. In this study, we analysed labour accidents that possess the characteristics of a rock fall event at a work site. We also introduced accident prevention measures against rock fall events. PMID:26027707

  4. Traffic Analysis and Road Accidents: A Case Study of Hyderabad using GIS

    NASA Astrophysics Data System (ADS)

    Bhagyaiah, M.; Shrinagesh, B.

    2014-06-01

    Globalization has impacted many developing countries across the world. India is one such country, which benefited the most. Increased, economic activity raised the consumption levels of the people across the country. This created scope for increase in travel and transportation. The increase in the vehicles since last 10 years has put lot of pressure on the existing roads and ultimately resulting in road accidents. It is estimated that since 2001 there is an increase of 202 percent of two wheeler and 286 percent of four wheeler vehicles with no road expansion. Motor vehicle crashes are a common cause of death, disability and demand for emergency medical care. Globally, more than 1 million people die each year from traffic crashes and about 20-50 million are injured or permanently disabled. There has been increasing trend in road accidents in Hyderabad over a few years. GIS helps in locating the accident hotspots and also in analyzing the trend of road accidents in Hyderabad.

  5. GIS based analysis of Intercity Fatal Road Traffic Accidents in Iran.

    PubMed

    Alizadeh, A; Zare, M; Darparesh, M; Mohseni, S; Soleimani-Ahmadi, M

    2015-01-01

    Road traffic accidents including intercity car traffic accidents (ICTAs) are among the most important causes of morbidity and mortality due to the growing number of vehicles, risky behaviors, and changes in lifestyle of the general population. A sound knowledge of the geographical distribution of car traffic accidents can be considered as an approach towards the accident causation and it can be used as an administrative tool in allocating the sources for traffic accidents prevention. This study was conducted to investigate the geographical distribution and the time trend of fatal intercity car traffic accidents in Iran. To conduct this descriptive study, all Iranian intercity road traffic mortality data were obtained from the Police reports in the Statistical Yearbook of the Governor's Budget and Planning. The obtained data were for 17 complete Iranian calendar years from March 1997 to March 2012. The incidence rate (IR) of fatal ICTAs for each year was calculated as the total number of fatal ICTAs in every 100000 population in specified time intervals. Figures and maps indicating the trends and geographical distribution of fatal ICTAs were prepared while using Microsoft Excel and ArcGis9.2 software. The number of fatal car accidents showed a general increasing trend from 3000 in 1996 to 13500 in 2012. The incidence of fatal intercity car accidents has changed from six in 100000 population in 1996 to 18 in 100000 population in 2012. GIS based data showed that the incidence rate of ICTAs in different provinces of Iran was very divergent. The highest incidence of fatal ICTAs was in Semnan province (IR= 35.2), followed by North Khorasan (IR=22.7), and South Khorasan (IR=22). The least incidence of fatal ICTAs was in Tehran province (IR=2.4) followed by Khozestan (IR=6.5), and Eastern Azarbayejan (IR=6.6). The compensation cost of fatal ICTAs also showed an increasing trend during the studied period. Since an increasing amount of money was being paid yearly for the car

  6. GIS based analysis of Intercity Fatal Road Traffic Accidents in Iran

    PubMed Central

    Alizadeh, A; Zare, M; Darparesh, M; Mohseni, S; Soleimani-Ahmadi, M

    2015-01-01

    Road traffic accidents including intercity car traffic accidents (ICTAs) are among the most important causes of morbidity and mortality due to the growing number of vehicles, risky behaviors, and changes in lifestyle of the general population. A sound knowledge of the geographical distribution of car traffic accidents can be considered as an approach towards the accident causation and it can be used as an administrative tool in allocating the sources for traffic accidents prevention. This study was conducted to investigate the geographical distribution and the time trend of fatal intercity car traffic accidents in Iran. To conduct this descriptive study, all Iranian intercity road traffic mortality data were obtained from the Police reports in the Statistical Yearbook of the Governor’s Budget and Planning. The obtained data were for 17 complete Iranian calendar years from March 1997 to March 2012. The incidence rate (IR) of fatal ICTAs for each year was calculated as the total number of fatal ICTAs in every 100000 population in specified time intervals. Figures and maps indicating the trends and geographical distribution of fatal ICTAs were prepared while using Microsoft Excel and ArcGis9.2 software. The number of fatal car accidents showed a general increasing trend from 3000 in 1996 to 13500 in 2012. The incidence of fatal intercity car accidents has changed from six in 100000 population in 1996 to 18 in 100000 population in 2012. GIS based data showed that the incidence rate of ICTAs in different provinces of Iran was very divergent. The highest incidence of fatal ICTAs was in Semnan province (IR= 35.2), followed by North Khorasan (IR=22.7), and South Khorasan (IR=22). The least incidence of fatal ICTAs was in Tehran province (IR=2.4) followed by Khozestan (IR=6.5), and Eastern Azarbayejan (IR=6.6). The compensation cost of fatal ICTAs also showed an increasing trend during the studied period. Since an increasing amount of money was being paid yearly for the

  7. The Role of Materials Degradation and Analysis in the Space Shuttle Columbia Accident Investigation

    NASA Technical Reports Server (NTRS)

    McDanels, Steven J.

    2006-01-01

    The efforts following the loss of the Space Shuttle Columbia included debris recovery, reconstruction, and analysis. The debris was subjected to myriad quantitative and semiquantitative chemical analysis techniques, ranging from examination via the scanning electron microscope (SEM) with energy dispersive spectrometer (EDS) to X-Ray diffraction (XRD) and electron probe micro-analysis (EPMA). The results from the work with the debris helped the investigators determine the location where a breach likely occurred in the leading edge of the left wing during lift off of the Orbiter from the Kennedy Space Center. Likewise, the information evidenced by the debris was also crucial in ascertaining the path of impinging plasma flow once it had breached the wing. After the Columbia Accident Investigation Board (CAIB) issued its findings, the major portion of the investigation was concluded. However, additional work remained to be done on many pieces of debris from portions of the Orbiter which were not directly related to the initial impact during ascent. This subsequent work was not only performed in the laboratory, but was also performed with portable equipment, including examination via portable X-Ray fluorescence (XRF) and Fourier transform infrared spectroscopy (FTIR). Likewise, acetate and silicon-rubber replicas of various fracture surfaces were obtained for later macroscopic and fractographic examination. This paper will detail the efforts and findings from the initial investigation, as well as present results obtained by the later examination and analysis of debris from the Orbiter including its windows, bulkhead structures, and other components which had not been examined during the primary investigation.

  8. Highway accident severities and the mixed logit model: an exploratory empirical analysis.

    PubMed

    Milton, John C; Shankar, Venky N; Mannering, Fred L

    2008-01-01

    Many transportation agencies use accident frequencies, and statistical models of accidents frequencies, as a basis for prioritizing highway safety improvements. However, the use of accident severities in safety programming has been often been limited to the locational assessment of accident fatalities, with little or no emphasis being placed on the full severity distribution of accidents (property damage only, possible injury, injury)-which is needed to fully assess the benefits of competing safety-improvement projects. In this paper we demonstrate a modeling approach that can be used to better understand the injury-severity distributions of accidents on highway segments, and the effect that traffic, highway and weather characteristics have on these distributions. The approach we use allows for the possibility that estimated model parameters can vary randomly across roadway segments to account for unobserved effects potentially relating to roadway characteristics, environmental factors, and driver behavior. Using highway-injury data from Washington State, a mixed (random parameters) logit model is estimated. Estimation findings indicate that volume-related variables such as average daily traffic per lane, average daily truck traffic, truck percentage, interchanges per mile and weather effects such as snowfall are best modeled as random-parameters-while roadway characteristics such as the number of horizontal curves, number of grade breaks per mile and pavement friction are best modeled as fixed parameters. Our results show that the mixed logit model has considerable promise as a methodological tool in highway safety programming.

  9. Biomechanical analysis of occupant kinematics in rollover motor vehicle accidents: dynamic spit test.

    PubMed

    Sances, Anthony; Kumaresan, Srirangam; Clarke, Richard; Herbst, Brian; Meyer, Steve

    2005-01-01

    A better understanding of occupant kinematics in rollover accidents helps to advance biomechanical knowledge and to enhance the safety features of motor vehicles. While many rollover accident simulation studies have adopted the static approach to delineate the occupant kinematics in rollover accidents, very few studies have attempted the dynamic approach. The present work was designed to study the biomechanics of restrained occupants during rollover accidents using the steady-state dynamic spit test and to address the importance of keeping the lap belt fastened. Experimental tests were conducted using an anthropometric 50% Hybrid III dummy in a vehicle. The vehicle was rotated at 180 degrees/second and the dummy was restrained using a standard three-point restraint system. The lap belt of the dummy was fastened either by using the cinching latch plate or by locking the retractor. Three configurations of shoulder belt harness were simulated: shoulder belt loose on chest with cinch plate, shoulder belt under the left arm and shoulder belt behind the chest. In all tests, the dummy stayed within the confinement of the vehicle indicating that the securely fastened lap belt holds the dummy with dynamic movement of 3 1/2" to 4". The results show that occupant movement in rollover accidents is least affected by various shoulder harness positions with a securely fastened lap belt. The present study forms a first step in delineating the biomechanics of occupants in rollover accidents.

  10. Identification of Behavior Based Safety by Using Traffic Light Analysis to Reduce Accidents

    NASA Astrophysics Data System (ADS)

    Mansur, A.; Nasution, M. I.

    2016-01-01

    This work present the safety assessment of a case study and describes an important area within the field production in oil and gas industry, namely behavior based safety (BBS). The company set a rigorous BBS and its intervention program that implemented and deployed continually. In this case, observers requested to have discussion and spread a number of determined questions related with work behavior to the workers during observation. Appraisal of Traffic Light Analysis (TLA) as one tools of risk assessment used to determine the estimated score of BBS questionnaire. Standardization of TLA appraisal in this study are based on Regulation of Minister of Labor and Occupational Safety and Health No:PER.05/MEN/1996. The result shown that there are some points under 84%, which categorized in yellow category and should corrected immediately by company to prevent existing bad behavior of workers. The application of BBS expected to increase the safety performance at work time-by-time and effective in reducing accidents.

  11. THERMAL ANALYSIS OF A 9975 PACKAGE IN A FACILITY FIRE ACCIDENT

    SciTech Connect

    Gupta, N.

    2011-02-14

    Surplus plutonium bearing materials in the U.S. Department of Energy (DOE) complex are stored in the 3013 containers that are designed to meet the requirements of the DOE standard DOE-STD-3013. The 3013 containers are in turn packaged inside 9975 packages that are designed to meet the NRC 10 CFR Part 71 regulatory requirements for transporting the Type B fissile materials across the DOE complex. The design requirements for the hypothetical accident conditions (HAC) involving a fire are given in 10 CFR 71.73. The 9975 packages are stored at the DOE Savannah River Site in the K-Area Material Storage (KAMS) facility for long term of up to 50 years. The design requirements for safe storage in KAMS facility containing multiple sources of combustible materials are far more challenging than the HAC requirements in 10 CFR 71.73. While the 10 CFR 71.73 postulates an HAC fire of 1475 F and 30 minutes duration, the facility fire calls for a fire of 1500 F and 86 duration. This paper describes a methodology and the analysis results that meet the design limits of the 9975 component and demonstrate the robustness of the 9975 package.

  12. Sensitivity analysis of a ship accident at a deep-ocean site in the northwest Atlantic

    SciTech Connect

    Kaplan, M.F.

    1985-04-01

    This report presents the results of a sensitivity analysis for an HLW ship accident occurring in the Nares Abyssal Plain in the northwestern Atlantic. Waste form release rate, canister lifetime and sorption in the water column (partition coefficients) were varied. Also investigated were the relative importance of the dose from the food chain and from seaweed in the diet. Peak individual doses and integrated collective doses for populations were the units of comparison. In accordance with international guidelines on radiological protection, the comparisons of different options were carried out over ''all time''; the study uses a million-year time frame. Partition coefficients have the most pronounced effect on collective dose of the parameters studied. Variations in partition coefficients affect the shape of the collective dose curve over the entire time frame. Peak individual doses decrease markedly when the value for the sorption of americium is increased, but show no increase when less sorption is assumed. Waste form release rates and canister lifetimes affect collective doses only in periods prior to 20,000 years. Hence, comparisons of these options need not be carried out beyond 20,000 years. Waste from release rates below 10/sup -3//yr (nominal value) affect individual doses in a linear manner, i.e., an order-of-magnitude reduction in release rate leads to an order-of-magnitude reduction in peak individual dose. Little reduction in peak individual doses is seen with canister lifetimes extended beyond the nominal 100 years. 32 refs., 14 figs., 16 tabs.

  13. Routes to failure: analysis of 41 civil aviation accidents from the Republic of China using the human factors analysis and classification system.

    PubMed

    Li, Wen-Chin; Harris, Don; Yu, Chung-San

    2008-03-01

    The human factors analysis and classification system (HFACS) is based upon Reason's organizational model of human error. HFACS was developed as an analytical framework for the investigation of the role of human error in aviation accidents, however, there is little empirical work formally describing the relationship between the components in the model. This research analyses 41 civil aviation accidents occurring to aircraft registered in the Republic of China (ROC) between 1999 and 2006 using the HFACS framework. The results show statistically significant relationships between errors at the operational level and organizational inadequacies at both the immediately adjacent level (preconditions for unsafe acts) and higher levels in the organization (unsafe supervision and organizational influences). The pattern of the 'routes to failure' observed in the data from this analysis of civil aircraft accidents show great similarities to that observed in the analysis of military accidents. This research lends further support to Reason's model that suggests that active failures are promoted by latent conditions in the organization. Statistical relationships linking fallible decisions in upper management levels were found to directly affect supervisory practices, thereby creating the psychological preconditions for unsafe acts and hence indirectly impairing the performance of pilots, ultimately leading to accidents.

  14. Revealing the association between cerebrovascular accidents and ambient temperature: a meta-analysis

    NASA Astrophysics Data System (ADS)

    Zorrilla-Vaca, Andrés; Healy, Ryan Jacob; Silva-Medina, Melissa M.

    2016-10-01

    The association between cerebrovascular accidents (CVA) and weather has been described across several studies showing multiple conflicting results. In this paper, we aim to conduct a meta-analysis to further clarify this association, as well as to find the potential sources of heterogeneity. PubMed, EMBASE, and Google Scholar were searched from inception through 2015, for articles analyzing the correlation between the incidence of CVA and temperature. A pooled effect size (ES) was estimated using random effects model and expressed as absolute values. Subgroup analyses by type of CVA were also performed. Heterogeneity and influence of covariates—including geographic latitude of the study site, male percentage, average temperature, and time interval—were assessed by meta-regression analysis. Twenty-six articles underwent full data extraction and scoring. A total of 19,736 subjects with CVA from 12 different countries were included and grouped as ischemic strokes (IS; n = 14,199), intracerebral hemorrhages (ICH; n = 3798), and subarachnoid hemorrhages (SAH; n = 1739). Lower ambient temperature was significantly associated with increase in incidence of overall CVA when using unadjusted (pooled ES = 0.23, P < 0.001) and adjusted data (pooled ES = 0.03, P = 0.003). Subgroup analyses showed that lower temperature has higher impact on the incidence of ICH (pooled ES = 0.34, P < 0.001), than that of IS (pooled ES = 0.22, P < 0.001) and SAH (pooled ES = 0.11, P = 0.012). In meta-regression analysis, the geographic latitude of the study site was the most influencing factor on this association (Z-score = 8.68). Synthesis of the existing data provides evidence supporting that a lower ambient temperature increases the incidence of CVA. Further population-based studies conducted at negative latitudes are needed to clarify the influence of this factor.

  15. Safety Analysis of Small Break Loss of Coolant Accident for 1200 MWe Simplified Boiling Water Reactor (SBWR-1200 BDLB)

    SciTech Connect

    Xu, Y.; Revankar, S.T.; Ishii, M.

    2002-07-01

    The objective of this research is to assess the performance of the safety systems during small break loss of coolant accident (SBLOCA) transient in the full size SBWR. RELAP5/MOD3 was used to simulate the blow-down and long-term cooling responses of the various safety systems during the accident transient. An integral test for long-term cooling under low pressure was conducted in a scaled facility with the initial conditions given by the code simulation. The code applicability and the facility scalability were evaluated by the comparison between the test data and the code simulations. The scaling analysis has been done by the comparison of the prototype code predictions and the scaled-up test data with the proper scaling multiplications and time shifting. The good agreement between the major safety parameters has shown the applicability of the RELAP5/MOD3 code and the scalability of the facility for SBWR-1200 safety analysis applications. (authors)

  16. SCAP: a new methodology for safety management based on feedback from credible accident-probabilistic fault tree analysis system.

    PubMed

    Khan, F I; Iqbal, A; Ramesh, N; Abbasi, S A

    2001-10-12

    As it is conventionally done, strategies for incorporating accident--prevention measures in any hazardous chemical process industry are developed on the basis of input from risk assessment. However, the two steps-- risk assessment and hazard reduction (or safety) measures--are not linked interactively in the existing methodologies. This prevents a quantitative assessment of the impacts of safety measures on risk control. We have made an attempt to develop a methodology in which risk assessment steps are interactively linked with implementation of safety measures. The resultant system tells us the extent of reduction of risk by each successive safety measure. It also tells based on sophisticated maximum credible accident analysis (MCAA) and probabilistic fault tree analysis (PFTA) whether a given unit can ever be made 'safe'. The application of the methodology has been illustrated with a case study.

  17. A Review of Criticality Accidents 2000 Revision

    SciTech Connect

    Thomas P. McLaughlin; Shean P. Monahan; Norman L. Pruvost; Vladimir V. Frolov; Boris G. Ryazanov; Victor I. Sviridov

    2000-05-01

    Criticality accidents and the characteristics of prompt power excursions are discussed. Sixty accidental power excursions are reviewed. Sufficient detail is provided to enable the reader to understand the physical situation, the chemistry and material flow, and when available the administrative setting leading up to the time of the accident. Information on the power history, energy release, consequences, and causes are also included when available. For those accidents that occurred in process plants, two new sections have been included in this revision. The first is an analysis and summary of the physical and neutronic features of the chain reacting systems. The second is a compilation of observations and lessons learned. Excursions associated with large power reactors are not included in this report.

  18. The epidemiology and cost analysis of patients presented to Emergency Department following traffic accidents

    PubMed Central

    Karadana, Gökçe Akgül; Aksu, Nalan Metin; Akkaş, Meltem; Akman, Canan; Üzümcügil, Akın; Özmen, M. Mahir

    2013-01-01

    Background Traffic accidents are ranked first as the cause of personal injury throughout the world. The high number of traffic accidents yielding injuries and fatalities makes them of great importance to Emergency Departments. Material/Methods Patients admitted to Hacettepe University Faculty of Medicine Adult Emergency Department due to traffic accidents were investigated epidemiologically. Differences between groups were evaluated by Kruskall-Wallis, Mann-Whitney, and Wilcoxon tests. A value of p<0.05 was accepted as statistically significant. Results We included 2003 patients over 16 years of age. The mean age was 39.6±16.1 and 55% were males. Admissions by ambulance and due to motor vehicle accidents were the most common. In 2004 the rate of traffic accidents (15.3%) was higher than the other years, the most common month was May (10.8%), and the most common time period was 6 pm to 12 am (midnight). About half of the patients (51.5%) were admitted in the first 30 minutes. Life-threatening condition was present in 9.6% of the patients. Head trauma was the most common type of trauma, with the rate of 18.3%. Mortality rate was 81.8%. The average length of hospital stay was 403 minutes (6.7 hours) and the average cost per patient was 983±4364 TL. Conclusions Further studies are needed to compare the cost found in this study with the mean cost for Turkey. However, the most important step to reduce the direct and indirect costs due to traffic accidents is the prevention of these accidents. PMID:24316815

  19. Advanced neutron source reactor conceptual safety analysis report, three-element-core design: Chapter 15, accident analysis

    SciTech Connect

    Chen, N.C.J.; Wendel, M.W.; Yoder, G.L.; Harrington, R.M.

    1996-02-01

    In order to utilize reduced enrichment fuel, the three-element-core design for the Advanced Neutron Source has been proposed. The proposed core configuration consists of inner, middle, and outer elements, with the middle element offset axially beneath the inner and outer elements, which are axially aligned. The three-element-core RELAP5 model assumes that the reactor hardware is changed only within the core region, so that the loop piping, heat exchangers, and pumps remain as assumed for the two-element-core configuration. To assess the impact of changes in the core region configuration and the thermal-hydraulic steady-state conditions, the safety analysis has been updated. This report gives the safety margins for the loss-of-off-site power and pressure-boundary fault accidents based on the RELAP5 results. AU margins are greater for the three-element-core simulations than those calculated for the two-element core.

  20. Retrospection of Chernobyl nuclear accident for decision analysis concerning remedial actions in Ukraine

    SciTech Connect

    Georgievskiy, Vladimir

    2007-07-01

    It is considered the efficacy of decisions concerning remedial actions when of-site radiological monitoring in the early and (or) in the intermediate phases was absent or was not informative. There are examples of such situations in the former Soviet Union where many people have been exposed: releases of radioactive materials from 'Krasnoyarsk-26' into Enisey River, releases of radioactive materials from 'Chelabinsk-65' (the Kishtim accident), nuclear tests at the Semipalatinsk Test Site, the Chernobyl nuclear accident etc. If monitoring in the early and (or) in the intermediate phases is absent the decisions concerning remedial actions are usually developed on the base of permanent monitoring. However decisions of this kind may be essentially erroneous. For these cases it is proposed to make retrospection of radiological data of the early and intermediate phases of nuclear accident and to project decisions concerning remedial actions on the base of both retrospective data and permanent monitoring data. In this Report the indicated problem is considered by the example of the Chernobyl accident for Ukraine. Their of-site radiological monitoring in the early and intermediate phases was unsatisfactory. In particular, the pasture-cow-milk monitoring had not been made. All official decisions concerning dose estimations had been made on the base of measurements of {sup 137}Cs in body (40 measurements in 135 days and 55 measurements in 229 days after the Chernobyl accident). For the retrospection of radiological data of the Chernobyl accident dynamic model has been developed. This model has structure similar to the structure of Pathway model and Farmland model. Parameters of the developed model have been identified for agricultural conditions of Russia and Ukraine. By means of this model dynamics of 20 radionuclides in pathways and dynamics of doses have been estimated for the early, intermediate and late phases of the Chernobyl accident. The main results are following

  1. Analysis of 121 fatal passenger car-adult pedestrian accidents in China.

    PubMed

    Zhao, Hui; Yin, Zhiyong; Yang, Guangyu; Che, Xingping; Xie, Jingru; Huang, Wei; Wang, Zhengguo

    2014-10-01

    To study the characteristics of fatal vehicle-pedestrian accidents in China,a team was established and passenger car-pedestrian crash cases occurring between 2006 and 2011 in Beijing and Chongqing, China were collected. A total of 121 fatal passenger car-adult pedestrian collisions were sampled and analyzed. The pedestrian injuries were scored according to Abbreviated Injury Scale (AIS) and Injury Severity Score (ISS). The demographical distributions of fatal pedestrian accidents differed from other pedestrian accidents. Among the victims, no significant discrepancy in the distribution of ISS and AIS in head, thorax, abdomen, and extremities by pedestrian age was found, while pedestrian behaviors prior to the crashes may affect the ISS. The distributions of AIS in head, thorax, and abdomen among the fatalities did not show any association with impact speeds or vehicle types, whereas there was a strong relationship between the ISS and impact speeds. Whether pedestrians died in the accident field or not was not associated with the ISS or AIS. The present results may be useful for not only forensic experts but also vehicle safety researchers. More investigations regarding fatal pedestrian accidents need be conducted in great detail.

  2. APT Blanket System Loss-of-Coolant Accident (LOCA) Analysis Based on Initial Conceptual Design - Case 3: External HR Break at Pump Outlet without Pump Trip

    SciTech Connect

    Hamm, L.L.

    1998-10-07

    This report is one of a series of reports that document normal operation and accident simulations for the Accelerator Production of Tritium (APT) blanket heat removal (HR) system. These simulations were performed for the Preliminary Safety Analysis Report.

  3. 32 CFR 634.28 - Traffic accident investigation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 4 2011-07-01 2011-07-01 false Traffic accident investigation. 634.28 Section... accident investigation. Installation law enforcement personnel must make detailed investigations of accidents described in this section: (a) Accidents involving Government vehicles or Government property...

  4. 32 CFR 634.28 - Traffic accident investigation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 4 2012-07-01 2011-07-01 true Traffic accident investigation. 634.28 Section... accident investigation. Installation law enforcement personnel must make detailed investigations of accidents described in this section: (a) Accidents involving Government vehicles or Government property...

  5. 32 CFR 634.28 - Traffic accident investigation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 4 2014-07-01 2013-07-01 true Traffic accident investigation. 634.28 Section... accident investigation. Installation law enforcement personnel must make detailed investigations of accidents described in this section: (a) Accidents involving Government vehicles or Government property...

  6. 32 CFR 634.28 - Traffic accident investigation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Traffic accident investigation. 634.28 Section... accident investigation. Installation law enforcement personnel must make detailed investigations of accidents described in this section: (a) Accidents involving Government vehicles or Government property...

  7. 32 CFR 634.28 - Traffic accident investigation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 4 2013-07-01 2013-07-01 false Traffic accident investigation. 634.28 Section... accident investigation. Installation law enforcement personnel must make detailed investigations of accidents described in this section: (a) Accidents involving Government vehicles or Government property...

  8. Nuclear accidents

    SciTech Connect

    Mobley, J.A.

    1982-05-01

    A nuclear accident with radioactive contamination can happen anywhere in the world. Because expert nuclear emergency teams may take several hours to arrive at the scene, local authorities must have a plan of action for the hours immediately following an accident. The site should be left untouched except to remove casualties. Treatment of victims includes decontamination and meticulous wound debridement. Acute radiation syndrome may be an overwhelming sequela.

  9. What can the drivers' own description from combined sources provide in an analysis of driver distraction and low vigilance in accident situations?

    PubMed

    Tivesten, Emma; Wiberg, Henrik

    2013-03-01

    Accident data play an important role in vehicle safety development. Accident data sources are generally limited in terms of how much information is provided on driver states and behaviour prior to an accident. However, the precise limitations vary between databases, due to differences in analysis focus and data collection procedures between organisations. If information about a specific accident can be retrieved from more than one data source it should be possible to combine the available information sets to facilitate data from one source to compensate for limitations in the other(s). To investigate the viability of such compensation, this study identified a set of accidents recorded in two different data sources. The first data source investigated was an accident mail survey and the second data source insurance claims documents consisting predominantly of insurance claims completed by the involved road users. An analysis of survey variables was compared to a case analysis including word data derived from the same survey and filed insurance claims documents. For each accident, the added value of having access to more than one source of information was assessed. To limit the scope of this study, three particular topics were investigated: available information on low vigilance (e.g., being drowsy, ill); secondary task distraction (e.g., talking with passengers, mobile phone use); and distraction related to the driving task (e.g., looking for approaching vehicles). Results suggest that for low vigilance and secondary task distraction, a combination of the mail survey and insurance claims documents provide more reliable and detailed pre-crash information than survey variables alone. However, driving related distraction appears to be more difficult to capture. In order to gain a better understanding of the above issues and how frequently they occur in accidents, the data sources and analysis methods suggested here may be combined with other investigation methods such

  10. The failure analysis of composite material flight helmets as an aid in aircraft accident investigation.

    PubMed

    Caine, Y G; Bain-Ungerson, O; Schochat, I; Marom, G

    1991-06-01

    Understanding why a flying helmet fails to maintain its integrity during an accident can contribute to an understanding of the mechanism of injury and even of the accident itself. We performed a post-accident evaluation of failure modes in glass and aramid fibre-reinforced composite helmets. Optical and microscopic (SEM) techniques were employed to identify specific fracture mechanisms. They were correlated with the failure mode. Stress and energy levels were estimated from the damage extent. Damage could be resolved into distinct impact, flexure and compression components. Delamination was identified as a specific mode, dependent upon the matrix material and bonding between the layers. From the energy dissipated in specific fracture mechanisms we calculated the minimum total energy imparted to the helmet-head combination and the major injury vector (MIV) direction and magnitude. The level of protection provided by the helmet can also be estimated.

  11. A Comprehensive Analysis of the X-15 Flight 3-65 Accident

    NASA Technical Reports Server (NTRS)

    Dennehy, Cornelius J.; Orr, Jeb S.; Barshi, Immanuel; Statler, Irving C.

    2014-01-01

    The November 15, 1967, loss of X-15 Flight 3-65-97 (hereafter referred to as Flight 3-65) was a unique incident in that it was the first and only aerospace flight accident involving loss of crew on a vehicle with an adaptive flight control system (AFCS). In addition, Flight 3-65 remains the only incidence of a single-pilot departure from controlled flight of a manned entry vehicle in a hypersonic flight regime. To mitigate risk to emerging aerospace systems, the NASA Engineering and Safety Center (NESC) proposed a comprehensive review of this accident. The goal of the assessment was to resolve lingering questions regarding the failure modes of the aircraft systems (including the AFCS) and thoroughly analyze the interactions among the human agents and autonomous systems that contributed to the loss of the pilot and aircraft. This document contains the outcome of the accident review.

  12. Development of the simulation system {open_quotes}IMPACT{close_quotes} for analysis of nuclear power plant severe accidents

    SciTech Connect

    Naitoh, Masanori; Ujita, Hiroshi; Nagumo, Hiroichi

    1997-07-01

    The Nuclear Power Engineering Corporation (NUPEC) has initiated a long-term program to develop the simulation system {open_quotes}IMPACT{close_quotes} for analysis of hypothetical severe accidents in nuclear power plants. IMPACT employs advanced methods of physical modeling and numerical computation, and can simulate a wide spectrum of senarios ranging from normal operation to hypothetical, beyond-design-basis-accident events. Designed as a large-scale system of interconnected, hierarchical modules, IMPACT`s distinguishing features include mechanistic models based on first principles and high speed simulation on parallel processing computers. The present plan is a ten-year program starting from 1993, consisting of the initial one-year of preparatory work followed by three technical phases: Phase-1 for development of a prototype system; Phase-2 for completion of the simulation system, incorporating new achievements from basic studies; and Phase-3 for refinement through extensive verification and validation against test results and available real plant data.

  13. Environmental risk management for radiological accidents: integrating risk assessment and decision analysis for remediation at different spatial scales.

    PubMed

    Yatsalo, Boris; Sullivan, Terrence; Didenko, Vladimir; Linkov, Igor

    2011-07-01

    The consequences of the Tohuku earthquake and subsequent tsunami in March 2011 caused a loss of power at the Fukushima Daiichi nuclear power plant, in Japan, and led to the release of radioactive materials into the environment. Although the full extent of the contamination is not currently known, the highly complex nature of the environmental contamination (radionuclides in water, soil, and agricultural produce) typical of nuclear accidents requires a detailed geospatial analysis of information with the ability to extrapolate across different scales with applications to risk assessment models and decision making support. This article briefly summarizes the approach used to inform risk-based land management and remediation decision making after the Chernobyl, Soviet Ukraine, accident in 1986.

  14. Probabilistic accident consequence uncertainty analysis -- Uncertainty assessment for deposited material and external doses. Volume 1: Main report

    SciTech Connect

    Goossens, L.H.J.; Kraan, B.C.P.; Cooke, R.M.; Boardman, J.; Jones, J.A.; Harper, F.T.; Young, M.L.; Hora, S.C.

    1997-12-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA deposited material and external dose models.

  15. Final report on accident tolerant fuel performance analysis of APMT-Steel Clad/UO₂ fuel and APMT-Steel Clad/UN-U₃Si₅ fuel concepts

    SciTech Connect

    Unal, Cetin; Galloway, Jack D.

    2014-09-12

    In FY2014 our group completed and documented analysis of new Accident Tolerant Fuel (ATF) concepts using BISON. We have modeled the viability of moving from Zircaloy to stainless steel cladding in traditional light water reactors (LWRs). We have explored the reactivity penalty of this change using the MCNP-based burnup code Monteburns, while attempting to minimize this penalty by increasing the fuel pellet radius and decreasing the cladding thickness. Fuel performance simulations using BISON have also been performed to quantify changes to structural integrity resulting from thinner stainless steel claddings. We account for thermal and irradiation creep, fission gas swelling, thermal swelling and fuel relocation in the models for both Zircaloy and stainless steel claddings. Additional models that account for the lower oxidation stainless steel APMT are also invoked where available. Irradiation data for HT9 is used as a fallback in the absence of appropriate models. In this study the isotopic vectors within each natural element are varied to assess potential reactivity gains if advanced enrichment capabilities were levied towards cladding technologies. Recommendations on cladding thicknesses for a robust cladding as well as the constitutive components of a less penalizing composition are provided. In the first section (section 1-3), we present results accepted for publication in the 2014 TOPFUEL conference regarding the APMT/UO₂ ATF concept (J. Galloway & C. Unal, Accident Tolerant and Neutronically Favorable LWR Cladding, Proceedings of WRFPM 2014, Sendai, Japan, Paper No.1000050). Next we discuss our preliminary findings from the thermo-mechanical analysis of UN-U₃Si₅ fuel with APMT clad. In this analysis we used models developed from limited data that need to be updated when the irradiation data from ATF-1 test is available. Initial results indicate a swelling rate less than 1.5% is needed to prevent excessive clad stress.

  16. STEM mode in the SEM for the analysis of cellular sections prepared by ultramicrotome sectioning

    NASA Astrophysics Data System (ADS)

    Hondow, N.; Harrington, J.; Brydson, R.; Brown, A.

    2012-07-01

    The use of the dual imaging capabilities of a scanning electron microscope fitted with a transmitted electron detector is highlighted in the analysis of samples with importance in the field of nanotoxicology. Cellular uptake of nanomaterials is often examined by transmission electron microscopy of thin sections prepared by ultramicrotome sectioning. Examination by SEM allows for the detection of artefacts caused by sample preparation (eg. nanomaterial pull-out) and the complementary STEM mode permits study of the interaction between nanomaterials and cells. Thin sections of two nanomaterials of importance in nanotoxicology (cadmium selenide quantum dots and single walled carbon nanotubes) are examined using STEM mode in the SEM.

  17. Estimating Loss-of-Coolant Accident Frequencies for the Standardized Plant Analysis Risk Models

    SciTech Connect

    S. A. Eide; D. M. Rasmuson; C. L. Atwood

    2008-09-01

    The U.S. Nuclear Regulatory Commission maintains a set of risk models covering the U.S. commercial nuclear power plants. These standardized plant analysis risk (SPAR) models include several loss-of-coolant accident (LOCA) initiating events such as small (SLOCA), medium (MLOCA), and large (LLOCA). All of these events involve a loss of coolant inventory from the reactor coolant system. In order to maintain a level of consistency across these models, initiating event frequencies generally are based on plant-type average performance, where the plant types are boiling water reactors and pressurized water reactors. For certain risk analyses, these plant-type initiating event frequencies may be replaced by plant-specific estimates. Frequencies for SPAR LOCA initiating events previously were based on results presented in NUREG/CR-5750, but the newest models use results documented in NUREG/CR-6928. The estimates in NUREG/CR-6928 are based on historical data from the initiating events database for pressurized water reactor SLOCA or an interpretation of results presented in the draft version of NUREG-1829. The information in NUREG-1829 can be used several ways, resulting in different estimates for the various LOCA frequencies. Various ways NUREG-1829 information can be used to estimate LOCA frequencies were investigated and this paper presents two methods for the SPAR model standard inputs, which differ from the method used in NUREG/CR-6928. In addition, results obtained from NUREG-1829 are compared with actual operating experience as contained in the initiating events database.

  18. WheelerLab: An interactive program for sequence stratigraphic analysis of seismic sections, outcrops and well sections and the generation of chronostratigraphic sections and dynamic chronostratigraphic sections

    NASA Astrophysics Data System (ADS)

    Amosu, Adewale; Sun, Yuefeng

    WheelerLab is an interactive program that facilitates the interpretation of stratigraphic data (seismic sections, outcrop data and well sections) within a sequence stratigraphic framework and the subsequent transformation of the data into the chronostratigraphic domain. The transformation enables the identification of significant geological features, particularly erosional and non-depositional features that are not obvious in the original seismic domain. Although there are some software products that contain interactive environments for carrying out chronostratigraphic analysis, none of them are open-source codes. In addition to being open source, WheelerLab adds two important functionalities not present in currently available software: (1) WheelerLab generates a dynamic chronostratigraphic section and (2) WheelerLab enables chronostratigraphic analysis of older seismic data sets that exist only as images and not in the standard seismic file formats; it can also be used for the chronostratigraphic analysis of outcrop images and interpreted well sections. The dynamic chronostratigraphic section sequentially depicts the evolution of the chronostratigraphic chronosomes concurrently with the evolution of identified genetic stratal packages. This facilitates a better communication of the sequence-stratigraphic process. WheelerLab is designed to give the user both interactive and interpretational control over the transformation; this is most useful when determining the correct stratigraphic order for laterally separated genetic stratal packages. The program can also be used to generate synthetic sequence stratigraphic sections for chronostratigraphic analysis.

  19. 28 CFR 301.106 - Repetitious accidents.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Repetitious accidents. 301.106 Section 301.106 Judicial Administration FEDERAL PRISON INDUSTRIES, INC., DEPARTMENT OF JUSTICE INMATE ACCIDENT COMPENSATION General § 301.106 Repetitious accidents. If an inmate worker is involved in successive...

  20. 49 CFR 229.17 - Accident reports.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Accident reports. 229.17 Section 229.17..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS General § 229.17 Accident reports. (a) In the case of an accident due to a failure from any cause of a locomotive or any part or appurtenance...

  1. 28 CFR 301.106 - Repetitious accidents.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Repetitious accidents. 301.106 Section 301.106 Judicial Administration FEDERAL PRISON INDUSTRIES, INC., DEPARTMENT OF JUSTICE INMATE ACCIDENT COMPENSATION General § 301.106 Repetitious accidents. If an inmate worker is involved in successive...

  2. 49 CFR 195.50 - Reporting accidents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Reporting accidents. 195.50 Section 195.50 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An...

  3. 49 CFR 229.17 - Accident reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Accident reports. 229.17 Section 229.17..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS General § 229.17 Accident reports. (a) In the case of an accident due to a failure from any cause of a locomotive or any part or appurtenance...

  4. 28 CFR 301.106 - Repetitious accidents.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Repetitious accidents. 301.106 Section 301.106 Judicial Administration FEDERAL PRISON INDUSTRIES, INC., DEPARTMENT OF JUSTICE INMATE ACCIDENT COMPENSATION General § 301.106 Repetitious accidents. If an inmate worker is involved in successive...

  5. 28 CFR 301.106 - Repetitious accidents.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Repetitious accidents. 301.106 Section 301.106 Judicial Administration FEDERAL PRISON INDUSTRIES, INC., DEPARTMENT OF JUSTICE INMATE ACCIDENT COMPENSATION General § 301.106 Repetitious accidents. If an inmate worker is involved in successive...

  6. 49 CFR 195.50 - Reporting accidents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Reporting accidents. 195.50 Section 195.50 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An...

  7. 49 CFR 195.50 - Reporting accidents.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Reporting accidents. 195.50 Section 195.50 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An...

  8. 49 CFR 195.50 - Reporting accidents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Reporting accidents. 195.50 Section 195.50 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An...

  9. 28 CFR 301.106 - Repetitious accidents.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Repetitious accidents. 301.106 Section 301.106 Judicial Administration FEDERAL PRISON INDUSTRIES, INC., DEPARTMENT OF JUSTICE INMATE ACCIDENT COMPENSATION General § 301.106 Repetitious accidents. If an inmate worker is involved in successive...

  10. 49 CFR 229.17 - Accident reports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Accident reports. 229.17 Section 229.17..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS General § 229.17 Accident reports. (a) In the case of an accident due to a failure from any cause of a locomotive or any part or appurtenance...

  11. Risk Analysis for Public Consumption: Media Coverage of the Ginna Nuclear Reactor Accident.

    ERIC Educational Resources Information Center

    Dunwoody, Sharon; And Others

    Researchers have determined that the lay public makes risk judgments in ways that are very different from those advocated by scientists. Noting that these differences have caused considerable concern among those who promote and regulate health and safety, a study examined media coverage of the accident at the Robert E. Ginna nuclear power plant…

  12. An Analysis of Incident/Accident Reports from the Texas Secondary School Science Safety Survey, 2001

    ERIC Educational Resources Information Center

    Stephenson, Amanda L.; West, Sandra S.; Westerlund, Julie F.; Nelson, Nancy C.

    2003-01-01

    This study investigated safety in Texas secondary school science laboratory, classroom, and field settings. The Texas Education Agency (TEA) drew a random representative sample consisting of 199 secondary public schools in Texas. Eighty-one teachers completed Incident/Accident Reports. The reports were optional, anonymous, and open-ended; thus,…

  13. Spontaneous abortions after the Three Mile Island nuclear accident: a life table analysis

    SciTech Connect

    Goldhaber, M.K.; Staub, S.L.; Tokuhata, G.K.

    1983-07-01

    A study was conducted to determine whether the incidence of spontaneous abortion was greater than expected near the Three Mile Island (TMI) nuclear power plant during the months following the March 28, 1979 accident. All persons living within five miles of TMI were registered shortly after the accident, and information on pregnancy at the time of the accident was collected. After one year, all pregnancy cases were followed up and outcomes ascertained. Using the life table method, it was found that, given pregnancies after four completed weeks of gestation counting from the first day of the last menstrual period, the estimated incidence of spontaneous abortion (miscarriage before completion of 16 weeks of gestation) was 15.1 per cent for women pregnant at the time of the TMI accident. Combining spontaneous abortions and stillbirths (delivery of a dead fetus after 16 weeks of gestation), the estimated incidence was 16.1 per cent for pregnancies after four completed weeks of gestation. Both incidences are comparable to baseline studies of fetal loss.

  14. [Accident analysis in ex ASL FG/2 Cerignola (FG) related to the period 2001-2001].

    PubMed

    Gadela, Nicola

    2009-01-01

    The purpose of this study was to quantify and qualify the accidents that occurred in the FG/2 local health authority structures (Southern Italy) during the 5-year period 2001-2006, in order to identify their characteristics and to plan the possible preventive strategies that would allow the health workers to operate in a safer environment.

  15. Spontaneous abortions after the Three Mile Island nuclear accident: a life table analysis.

    PubMed Central

    Goldhaber, M K; Staub, S L; Tokuhata, G K

    1983-01-01

    A study was conducted to determine whether the incidence of spontaneous abortion was greater than expected near the Three Mile Island (TMI) nuclear power plant during the months following the March 28, 1979 accident. All persons living within five miles of TMI were registered shortly after the accident, and information on pregnancy at the time of the accident was collected. After one year, all pregnancy cases were followed up and outcomes ascertained. Using the life table method, it was found that, given pregnancies after four completed weeks of gestation counting from the first day of the last menstrual period, the estimated incidence of spontaneous abortion (miscarriage before completion of 16 weeks of gestation) was 15.1 per cent for women pregnant at the time of the TMI accident. Combining spontaneous abortions and stillbirths (delivery of a dead fetus after 16 weeks of gestation), the estimated incidence was 16.1 per cent for pregnancies after four completed weeks of gestation. Both incidences are comparable to baseline studies of fetal loss. PMID:6859357

  16. A Longitudinal Analysis of the Causal Factors in Major Maritime Accidents in the USA and Canada (1996-2006)

    NASA Technical Reports Server (NTRS)

    Johnson, C. W.; Holloway, C, M.

    2007-01-01

    Accident reports provide important insights into the causes and contributory factors leading to particular adverse events. In contrast, this paper provides an analysis that extends across the findings presented over ten years investigations into maritime accidents by both the US National Transportation Safety Board (NTSB) and Canadian Transportation Safety Board (TSB). The purpose of the study was to assess the comparative frequency of a range of causal factors in the reporting of adverse events. In order to communicate our findings, we introduce J-H graphs as a means of representing the proportion of causes and contributory factors associated with human error, equipment failure and other high level classifications in longitudinal studies of accident reports. Our results suggest the proportion of causal and contributory factors attributable to direct human error may be very much smaller than has been suggested elsewhere in the human factors literature. In contrast, more attention should be paid to wider systemic issues, including the managerial and regulatory context of maritime operations.

  17. Analysis and application of relationship between post-braking-distance and throw distance in vehicle-pedestrian accident reconstruction.

    PubMed

    Zou, Tiefang; Yu, Zhi; Cai, Ming; Liu, Jike

    2011-04-15

    Through theoretical analysis and introduction of some empirical parameters, the relationship between post-braking-distance and throw distance was studied concentratedly. Here, the post-braking-distance is the distance a vehicle will travel from the impact position to when it comes to a complete stop. Two useful formulas which are meaningful in vehicle-pedestrian accident reconstruction were finally obtained. The first one can be used to calculate impact speed according to throw distance, while the other one can describe the relationship between post-braking-distance and throw distance. Their feasibility has been validated by comparing with other scholars' empirical formulas and simulation results of software Pc-Crash, respectively. The relationship between post-braking-distance and throw distance has very bright application perspective in vehicle-pedestrian accident reconstruction such as helping policemen obtain more useful evidences, validating credibility of the throw distance, judging whether the vehicle is fully braked or not, determining the impact position etc. Finally its application was demonstrated by three cases, in which the impact speed was also calculated. All results until now have shown that conclusions obtained in this article are feasible and helpful in vehicle-pedestrian accident reconstruction.

  18. Validation and verification of RELAP5 for Advanced Neutron Source accident analysis: Part I, comparisons to ANSDM and PRSDYN codes

    SciTech Connect

    Chen, N.C.J.; Ibn-Khayat, M.; March-Leuba, J.A.; Wendel, M.W.

    1993-12-01

    As part of verification and validation, the Advanced Neutron Source reactor RELAP5 system model was benchmarked by the Advanced Neutron Source dynamic model (ANSDM) and PRSDYN models. RELAP5 is a one-dimensional, two-phase transient code, developed by the Idaho National Engineering Laboratory for reactor safety analysis. Both the ANSDM and PRSDYN models use a simplified single-phase equation set to predict transient thermal-hydraulic performance. Brief descriptions of each of the codes, models, and model limitations were included. Even though comparisons were limited to single-phase conditions, a broad spectrum of accidents was benchmarked: a small loss-of-coolant-accident (LOCA), a large LOCA, a station blackout, and a reactivity insertion accident. The overall conclusion is that the three models yield similar results if the input parameters are the same. However, ANSDM does not capture pressure wave propagation through the coolant system. This difference is significant in very rapid pipe break events. Recommendations are provided for further model improvements.

  19. Fukushima Daiichi Unit 1 Accident Progression Uncertainty Analysis and Implications for Decommissioning of Fukushima Reactors - Volume I.

    SciTech Connect

    Gauntt, Randall O.; Mattie, Patrick D.

    2016-01-01

    Sandia National Laboratories (SNL) has conducted an uncertainty analysis (UA) on the Fukushima Daiichi unit (1F1) accident progression with the MELCOR code. The model used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). That study focused on reconstructing the accident progressions, as postulated by the limited plant data. This work was focused evaluation of uncertainty in core damage progression behavior and its effect on key figures-of-merit (e.g., hydrogen production, reactor damage state, fraction of intact fuel, vessel lower head failure). The primary intent of this study was to characterize the range of predicted damage states in the 1F1 reactor considering state of knowledge uncertainties associated with MELCOR modeling of core damage progression and to generate information that may be useful in informing the decommissioning activities that will be employed to defuel the damaged reactors at the Fukushima Daiichi Nuclear Power Plant. Additionally, core damage progression variability inherent in MELCOR modeling numerics is investigated.

  20. Launch Vehicle Fire Accident Preliminary Analysis of a Liquid-Metal Cooled Thermionic Nuclear Reactor: TOPAZ-II

    NASA Astrophysics Data System (ADS)

    Hu, G.; Zhao, S.; Ruan, K.

    2012-01-01

    In this paper, launch vehicle propellant fire accident analysis of TOPAZ-II reactor has been done by a thermionic reactor core analytic code-TATRHG(A) developed by author. When a rocket explodes on a launch pad, its payload-TOPAZ-II can be subjected to a severe thermal environment from the resulting fireball. The extreme temperatures associated with propellant fires can create a destructive environment in or near the fireball. Different kind of propellants - liquid propellant and solid propellant which will lead to different fire temperature are considered. Preliminary analysis shows that the solid propellant fires can melt the whole toxic beryllium radial reflector.

  1. Retrospective reconstruction of Ioidne-131 distribution at the Fukushima Daiichi Nuclear Power Plant accident by analysis of Ioidne-129

    NASA Astrophysics Data System (ADS)

    Matsuzaki, Hiroyuki; Muramatsu, Yasuyuki; Toyama, Chiaki; Ohno, Takeshi; Kusuno, Haruka; Miyake, Yasuto; Honda, Maki

    2014-05-01

    Science and Education on June, 2011. So far more than 500 samples were measured and determined I-129 deposition amount by AMS at MALT (Micro Analysis Laboratory, Tandem accelerator), The University of Tokyo. The measurement error from AMS is less than 5%, typically 3%. The overall uncertainty is estimated less than 30%, including the uncertainty from that of the nominal value of the standard reference material used, that of I-129/I-131 ratio estimation, that of the "representativeness" for the region by the analyzed sample, etc. The isotopic ratio I-129/I-131 from the reactor was estimated [3] (to be 22.3 +- 6.3 as of March 11, 2011) from a series of samples collected by a group of The University of Tokyo on the 20th of April, 2011 for which the I-131 was determined by gamma-ray spectrometry with good precision. Complementarily, we had investigated the depth profile in soil of the accident derived I-129 and migration speed after the deposition and found that more than 90% of I-129 was concentrated within top 5 cm layer and the downward migration speed was less than 1cm/yr [4]. From the set of I-129 data, corresponding I-131 were calculated and the distribution map is going to be constructed. Various fine structures of the distribution came in sight. [1] Y. Nikiforov and D. R. Gnepp, 1994, Cancer, Vol. 47, pp748-766. [2] T. Straume, et al., 1996, Health Physics, Vol. 71, pp733-740. [3] Y. Miyake, H. Matsuzaki et al.,2012, Geochem. J., Vol. 46, pp327-333. [4] M. Honda, H. Matsuzaki et al., under submission.

  2. Analysis of ex-core neutron detector response during a loss-of-coolant accident

    SciTech Connect

    Baratta, A.J.; Jester, W.A. ); Gundy, L.M. ); Imel, G.R. )

    1991-06-01

    In this paper the experimental response of ex-core neutron detectors during both actual and simulated loss-of-coolant accidents (LOCAs) at a pressurized water reactor are analyzed to determine their cause. Various analytical techniques are used to reproduce the ex-core detector response during large-break LOCAs. These techniques include both discrete ordinates transport and point kernel calculations. The experiments analyzed include large-break LOCA experiments at the Loss of Fluid Test Facility and from the Three Mile Island accident. The results show that an adiabatic method is sufficiently accurate to reproduce the detector response. This response can be explained in terms of the combined effects of changes in shielding and multiplication that occur in a core during a LOCA.

  3. Analysis of the effect of car size on accident injury probability using automobile insurance data.

    PubMed

    Krishnan, K S; Carnahan, J V

    1985-04-01

    The Highway Loss Data Institute (HLDI) compiles injury and collision claim information from major insurance companies. These data have indicated that a disproportionately large number of injury claims are made for small cars. As a result, it might be concluded that small cars increase injury risk to their occupants. Recent advertisements by a major automobile manufacturer suggest a similar conclusion should be drawn from these data. In this paper it is shown that the apparent higher injury risk attributed to small cars can reflect the behavior of persons driving small cars. The number of injury claim accidents per collision claim accident is examined as an alternative measure of injury risk. Possible problems in interpretation are discussed.

  4. Analysis of potential for jet-impingement erosion from leaking steam generator tubes during severe accidents.

    SciTech Connect

    Majumdar, S.; Diercks, D. R.; Shack, W. J.; Energy Technology

    2002-05-01

    This report summarizes analytical evaluation of crack-opening areas and leak rates of superheated steam through flaws in steam generator tubes and erosion of neighboring tubes due to jet impingement of superheated steam with entrained particles from core debris created during severe accidents. An analytical model for calculating crack-opening area as a function of time and temperature was validated with tests on tubes with machined flaws. A three-dimensional computational fluid dynamics code was used to calculate the jet velocity impinging on neighboring tubes as a function of tube spacing and crack-opening area. Erosion tests were conducted in a high-temperature, high-velocity erosion rig at the University of Cincinnati, using micrometer-sized nickel particles mixed in with high-temperature gas from a burner. The erosion results, together with analytical models, were used to estimate the erosive effects of superheated steam with entrained aerosols from the core during severe accidents.

  5. Accident simulation and consequence analysis in support of MHTGR safety evaluations

    SciTech Connect

    Ball, S.J.; Wichner, R.P.; Smith, O.L.; Conklin, J.C. ); Barthold, W.P. )

    1991-01-01

    This paper summarizes research performed at Oak Ridge National Laboratory (ORNL) to assist the Nuclear Regulatory Commission (NRC) in preliminary determinations of licensability of the US Department of Energy (DOE) reference design of a standard modular high-temperature gas-cooled reactor (MHTGR). The work described includes independent analyses of core heatup and steam ingress accidents, and the reviews and analyses of fuel performance and fission product transport technology.

  6. Third annual Warren K. Sinclair keynote address: retrospective analysis of impacts of the Chernobyl accident.

    PubMed

    Balonov, Mikhail

    2007-11-01

    The accident at the Chernobyl Nuclear Power Plant in 1986 was the most severe in the history of the nuclear industry, causing a huge release of radionuclides over large areas of Europe. The recently completed Chernobyl Forum concluded that after a number of years, along with reduction of radiation levels and accumulation of humanitarian consequences, severe social and economic depression of the affected regions and associated psychological problems of the general public and the workers had become the most significant problem to be addressed by the authorities. The majority of the >600,000 emergency and recovery operation workers and five million residents of the contaminated areas in Belarus, Russia, and Ukraine received relatively minor radiation doses which are comparable with the natural background levels. An exception is a cohort of several hundred emergency workers who received high radiation doses and of whom 28 persons died in 1986 due to acute radiation sickness. Apart from the dramatic increase in thyroid cancer incidence among those exposed to radioiodine at a young age and some increase of leukemia in the most exposed workers, there is no clearly demonstrated increase in the somatic diseases due to radiation. There was, however, an increase in psychological problems among the affected population, compounded by the social disruption that followed the break-up of the Soviet Union. Despite the unprecedented scale of the Chernobyl accident, its consequences on the health of people are far less severe than those of the atomic bombings of the cities of Hiroshima and Nagasaki. Studying the consequences of the Chernobyl accident has made an invaluable scientific contribution to the development of nuclear safety, radioecology, radiation medicine and protection, and also the social sciences. The Chernobyl accident initiated the global nuclear and radiation safety regime.

  7. Review of Cytogenetic analysis of restoration workers for Fukushima Daiichi nuclear power station accident.

    PubMed

    Suto, Yumiko

    2016-09-01

    Japan faced with the nuclear accident of the Fukushima Daiichi Nuclear Power Station (NPS) caused by the combined disaster of the Great East Japan Earthquake and the subsequent tsunamis on 11 March 2011. National Institute of Radiological Sciences received all nuclear workers who were engaged in emergency response tasks at the NPS and suspected of being overexposed to acute radiation. Biological dosimetry by dicentric chromosome assay was helpful for medical triage and management of the workers.

  8. An Analysis of Human Causal Factors in Unmanned Aerial Vehicle (UAV) Accidents

    DTIC Science & Technology

    2014-12-01

    PC 306 • Fatigue ( sleep deprivation ) PC 307 • Circadian rhythm de-synchronization (e.g., jet lag or shift work) PC 308 • Motion sickness PC...AERIAL VEHICLE (UAV) ACCIDENTS 5. FUNDING NUMBERS 6. AUTHOR(S) Mehmet Oncu and Suleyman Yildiz 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES...Naval Postgraduate School Monterey, CA 93943-5000 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING /MONITORING AGENCY NAME(S) AND

  9. 3D analysis of the reactivity insertion accident in VVER-1000

    SciTech Connect

    Abdullayev, A. M.; Zhukov, A. I.; Slyeptsov, S. M.

    2012-07-01

    Fuel parameters such as peak enthalpy and temperature during rod ejection accident are calculated. The calculations are performed by 3D neutron kinetics code NESTLE and 3D thermal-hydraulic code VIPRE-W. Both hot zero power and hot full power cases were studied for an equilibrium cycle with Westinghouse hex fuel in VVER-1000. It is shown that the use of 3D methodology can significantly increase safety margins for current criteria and met future criteria. (authors)

  10. The research of highway traffic accident management and pre-alarm system

    NASA Astrophysics Data System (ADS)

    Xu, Jianping; Zhang, Tiejun; Wan, Jiaonan; Zhang, Juwen; Wang, Rui

    For the rigorous traffic safety issues resulting from rapid transportation development, as well as the more and more attention paid to the traffic accidents dynamic analysis and pre-alarm methods, combined with the practical needs of the highway safety management, this paper summarizes the experience of traffic safety pre-alarm research both in domestic and abroad, designs the frame of highway traffic accident management and pre-alarm system from the function and software engineering requirement, and refines kernel modules such as accident prone section judgement, traffic safety pre-alarm analysis and perfecting safety measures analysis, in order to guide the exploitation and application of the system.

  11. SiC MODIFICATIONS TO MELCOR FOR SEVERE ACCIDENT ANALYSIS APPLICATIONS

    SciTech Connect

    Brad J. Merrill; Shannon M Bragg-Sitton

    2013-09-01

    The Department of Energy (DOE) Office of Nuclear Energy (NE) Light Water Reactor (LWR) Sustainability Program encompasses strategic research focused on improving reactor core economics and safety margins through the development of an advanced fuel cladding system. The Fuels Pathway within this program focuses on fuel system components outside of the fuel pellet, allowing for alteration of the existing zirconium-based clad system through coatings, addition of ceramic sleeves, or complete replacement (e.g. fully ceramic cladding). The DOE-NE Fuel Cycle Research & Development (FCRD) Advanced Fuels Campaign (AFC) is also conducting research on materials for advanced, accident tolerant fuels and cladding for application in operating LWRs. To aide in this assessment, a silicon carbide (SiC) version of the MELCOR code was developed by substituting SiC in place of Zircaloy in MELCOR’s reactor core oxidation and material property routines. The purpose of this development effort is to provide a numerical capability for estimating the safety advantages of replacing Zr-alloy components in LWRs with SiC components. This modified version of the MELCOR code was applied to the Three Mile Island (TMI-2) plant accident. While the results are considered preliminary, SiC cladding showed a dramatic safety advantage over Zircaloy cladding during this accident.

  12. Analysis of Radionuclide Releases from the Fukushima Dai-ichi Nuclear Power Plant Accident Part II

    NASA Astrophysics Data System (ADS)

    Achim, Pascal; Monfort, Marguerite; Le Petit, Gilbert; Gross, Philippe; Douysset, Guilhem; Taffary, Thomas; Blanchard, Xavier; Moulin, Christophe

    2014-03-01

    The present part of the publication (Part II) deals with long range dispersion of radionuclides emitted into the atmosphere during the Fukushima Dai-ichi accident that occurred after the March 11, 2011 tsunami. The first part (Part I) is dedicated to the accident features relying on radionuclide detections performed by monitoring stations of the Comprehensive Nuclear Test Ban Treaty Organization network. In this study, the emissions of the three fission products Cs-137, I-131 and Xe-133 are investigated. Regarding Xe-133, the total release is estimated to be of the order of 6 × 1018 Bq emitted during the explosions of units 1, 2 and 3. The total source term estimated gives a fraction of core inventory of about 8 × 1018 Bq at the time of reactors shutdown. This result suggests that at least 80 % of the core inventory has been released into the atmosphere and indicates a broad meltdown of reactor cores. Total atmospheric releases of Cs-137 and I-131 aerosols are estimated to be 1016 and 1017 Bq, respectively. By neglecting gas/particulate conversion phenomena, the total release of I-131 (gas + aerosol) could be estimated to be 4 × 1017 Bq. Atmospheric transport simulations suggest that the main air emissions have occurred during the events of March 14, 2011 (UTC) and that no major release occurred after March 23. The radioactivity emitted into the atmosphere could represent 10 % of the Chernobyl accident releases for I-131 and Cs-137.

  13. Probabilistic accident consequence uncertainty analysis: Food chain uncertainty assessment. Volume 1: Main report

    SciTech Connect

    Brown, J.; Goossens, L.H.J.; Kraan, B.C.P.

    1997-06-01

    This volume is the first of a two-volume document that summarizes a joint project conducted by the US Nuclear Regulatory Commission and the European Commission to assess uncertainties in the MACCS and COSYMA probabilistic accident consequence codes. These codes were developed primarily for estimating the risks presented by nuclear reactors based on postulated frequencies and magnitudes of potential accidents. This document reports on an ongoing project to assess uncertainty in the MACCS and COSYMA calculations for the offsite consequences of radionuclide releases by hypothetical nuclear power plant accidents. A panel of sixteen experts was formed to compile credible and traceable uncertainty distributions for food chain variables that affect calculations of offsite consequences. The expert judgment elicitation procedure and its outcomes are described in these volumes. Other panels were formed to consider uncertainty in other aspects of the codes. Their results are described in companion reports. Volume 1 contains background information and a complete description of the joint consequence uncertainty study. Volume 2 contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures for both panels, (3) the rationales and results for the panels on soil and plant transfer and animal transfer, (4) short biographies of the experts, and (5) the aggregated results of their responses.

  14. An analysis of thermionic space nuclear reactor power system: I. Effect of disassembling radial reflector, following a reactivity initiated accident

    SciTech Connect

    El-Genk, M.S.; Paramonov, D. )

    1993-01-10

    An analysis is performed to determine the effect of disassembling the radial reflector of the TOPAZ-II reactor, following a hypothetical severe Reactivity Initiated Accident (RIA). Such an RIA is assumed to occur during the system start-up in orbit due to a malfunction of the drive mechanism of the control drums, causing the drums to rotate the full 180[degree] outward at their maximum speed of 1.4[degree]/s. Results indicate that disassembling only three of twelve radial reflector panels would successfully shutdown the reactor, with little overheating of the fuel and the moderator.

  15. Accident analysis and control options in support of the sludge water system safety analysis

    SciTech Connect

    HEY, B.E.

    2003-01-16

    A hazards analysis was initiated for the SWS in July 2001 (SNF-8626, K Basin Sludge and Water System Preliminary Hazard Analysis) and updated in December 2001 (SNF-10020 Rev. 0, Hazard Evaluation for KE Sludge and Water System - Project A16) based on conceptual design information for the Sludge Retrieval System (SRS) and 60% design information for the cask and container. SNF-10020 was again revised in September 2002 to incorporate new hazards identified from final design information and from a What-if/Checklist evaluation of operational steps. The process hazards, controls, and qualitative consequence and frequency estimates taken from these efforts have been incorporated into Revision 5 of HNF-3960, K Basins Hazards Analysis. The hazards identification process documented in the above referenced reports utilized standard industrial safety techniques (AIChE 1992, Guidelines for Hazard Evaluation Procedures) to systematically guide several interdisciplinary teams through the system using a pre-established set of process parameters (e.g., flow, temperature, pressure) and guide words (e.g., high, low, more, less). The teams generally included representation from the U.S. Department of Energy (DOE), K Basins Nuclear Safety, T Plant Nuclear Safety, K Basin Industrial Safety, fire protection, project engineering, operations, and facility engineering.

  16. Structural analysis methods development for turbine hot section components

    NASA Technical Reports Server (NTRS)

    Thompson, R. L.

    1989-01-01

    The structural analysis technologies and activities of the NASA Lewis Research Center's gas turbine engine HOT Section Technoloogy (HOST) program are summarized. The technologies synergistically developed and validated include: time-varying thermal/mechanical load models; component-specific automated geometric modeling and solution strategy capabilities; advanced inelastic analysis methods; inelastic constitutive models; high-temperature experimental techniques and experiments; and nonlinear structural analysis codes. Features of the program that incorporate the new technologies and their application to hot section component analysis and design are described. Improved and, in some cases, first-time 3-D nonlinear structural analyses of hot section components of isotropic and anisotropic nickel-base superalloys are presented.

  17. Of Disasters and Dragon Kings: A Statistical Analysis of Nuclear Power Incidents and Accidents.

    PubMed

    Wheatley, Spencer; Sovacool, Benjamin; Sornette, Didier

    2017-01-01

    We perform a statistical study of risk in nuclear energy systems. This study provides and analyzes a data set that is twice the size of the previous best data set on nuclear incidents and accidents, comparing three measures of severity: the industry standard International Nuclear Event Scale, the Nuclear Accident Magnitude Scale of radiation release, and cost in U.S. dollars. The rate of nuclear accidents with cost above 20 MM 2013 USD, per reactor per year, has decreased from the 1970s until the present time. Along the way, the rate dropped significantly after Chernobyl (April 1986) and is expected to be roughly stable around a level of 0.003, suggesting an average of just over one event per year across the current global fleet. The distribution of costs appears to have changed following the Three Mile Island major accident (March 1979). The median cost became approximately 3.5 times smaller, but an extremely heavy tail emerged, being well described by a Pareto distribution with parameter α = 0.5-0.6. For instance, the cost of the two largest events, Chernobyl and Fukushima (March 2011), is equal to nearly five times the sum of the 173 other events. We also document a significant runaway disaster regime in both radiation release and cost data, which we associate with the "dragon-king" phenomenon. Since the major accident at Fukushima (March 2011) occurred recently, we are unable to quantify an impact of the industry response to this disaster. Excluding such improvements, in terms of costs, our range of models suggests that there is presently a 50% chance that (i) a Fukushima event (or larger) occurs every 60-150 years, and (ii) that a Three Mile Island event (or larger) occurs every 10-20 years. Further-even assuming that it is no longer possible to suffer an event more costly than Chernobyl or Fukushima-the expected annual cost and its standard error bracket the cost of a new plant. This highlights the importance of improvements not only immediately following

  18. 10 CFR 835.1304 - Nuclear accident dosimetry.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Nuclear accident dosimetry. 835.1304 Section 835.1304... Nuclear accident dosimetry. (a) Installations possessing sufficient quantities of fissile material to... nuclear accident is possible, shall provide nuclear accident dosimetry for those individuals. (b)...

  19. 10 CFR 835.1304 - Nuclear accident dosimetry.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Nuclear accident dosimetry. 835.1304 Section 835.1304... Nuclear accident dosimetry. (a) Installations possessing sufficient quantities of fissile material to... nuclear accident is possible, shall provide nuclear accident dosimetry for those individuals. (b)...

  20. 10 CFR 835.1304 - Nuclear accident dosimetry.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Nuclear accident dosimetry. 835.1304 Section 835.1304... Nuclear accident dosimetry. (a) Installations possessing sufficient quantities of fissile material to... nuclear accident is possible, shall provide nuclear accident dosimetry for those individuals. (b)...

  1. 10 CFR 835.1304 - Nuclear accident dosimetry.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Nuclear accident dosimetry. 835.1304 Section 835.1304... Nuclear accident dosimetry. (a) Installations possessing sufficient quantities of fissile material to... nuclear accident is possible, shall provide nuclear accident dosimetry for those individuals. (b)...

  2. 10 CFR 835.1304 - Nuclear accident dosimetry.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Nuclear accident dosimetry. 835.1304 Section 835.1304... Nuclear accident dosimetry. (a) Installations possessing sufficient quantities of fissile material to... nuclear accident is possible, shall provide nuclear accident dosimetry for those individuals. (b)...

  3. 49 CFR 382.209 - Use following an accident.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 5 2013-10-01 2013-10-01 false Use following an accident. 382.209 Section 382.209... ALCOHOL USE AND TESTING Prohibitions § 382.209 Use following an accident. No driver required to take a post-accident alcohol test under § 382.303 shall use alcohol for eight hours following the accident,...

  4. 50 CFR 25.72 - Reporting of accidents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Reporting of accidents. 25.72 Section 25... Reporting of accidents. Accidents involving damage to property, injury to the public or injury to wildlife..., but in no event later than 24 hours after the accident, by the persons involved, to the refuge...

  5. 29 CFR 1926.200 - Accident prevention signs and tags.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Accident prevention signs and tags. 1926.200 Section 1926... § 1926.200 Accident prevention signs and tags. (a) General. Signs and symbols required by this subpart.... (h) Accident prevention tags. (1) Accident prevention tags shall be used as a temporary means...

  6. 46 CFR 97.30-5 - Accidents to machinery.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Accidents to machinery. 97.30-5 Section 97.30-5 Shipping... Reports of Accidents, Repairs, and Unsafe Equipment § 97.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  7. 49 CFR 382.209 - Use following an accident.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Use following an accident. 382.209 Section 382.209... ALCOHOL USE AND TESTING Prohibitions § 382.209 Use following an accident. No driver required to take a post-accident alcohol test under § 382.303 shall use alcohol for eight hours following the accident,...

  8. 29 CFR 1926.200 - Accident prevention signs and tags.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Accident prevention signs and tags. 1926.200 Section 1926... § 1926.200 Accident prevention signs and tags. (a) General. Signs and symbols required by this subpart..., incorporated by reference in § 1926.6. (h) Accident prevention tags. (1) Accident prevention tags shall be...

  9. 49 CFR 382.209 - Use following an accident.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 5 2012-10-01 2012-10-01 false Use following an accident. 382.209 Section 382.209... ALCOHOL USE AND TESTING Prohibitions § 382.209 Use following an accident. No driver required to take a post-accident alcohol test under § 382.303 shall use alcohol for eight hours following the accident,...

  10. 49 CFR 382.209 - Use following an accident.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 5 2014-10-01 2014-10-01 false Use following an accident. 382.209 Section 382.209... ALCOHOL USE AND TESTING Prohibitions § 382.209 Use following an accident. No driver required to take a post-accident alcohol test under § 382.303 shall use alcohol for eight hours following the accident,...

  11. 29 CFR 1960.70 - Reporting of serious accidents.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Reporting of serious accidents. 1960.70 Section 1960.70... accidents. Agencies must provide the Office of Federal Agency Programs with a summary report of each fatal and catastrophic accident investigation. The summaries shall address the date/time of accident,...

  12. 46 CFR 97.30-5 - Accidents to machinery.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Accidents to machinery. 97.30-5 Section 97.30-5 Shipping... Reports of Accidents, Repairs, and Unsafe Equipment § 97.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  13. 50 CFR 25.72 - Reporting of accidents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 8 2011-10-01 2011-10-01 false Reporting of accidents. 25.72 Section 25... Reporting of accidents. Accidents involving damage to property, injury to the public or injury to wildlife..., but in no event later than 24 hours after the accident, by the persons involved, to the refuge...

  14. 14 CFR 415.41 - Accident investigation plan.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Accident investigation plan. 415.41 Section... Launch Range § 415.41 Accident investigation plan. An applicant must file an accident investigation plan... reporting and responding to launch accidents, launch incidents, or other mishaps, as defined by § 401.5...

  15. 46 CFR 196.30-5 - Accidents to machinery.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Accidents to machinery. 196.30-5 Section 196.30-5... Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  16. 46 CFR 196.30-5 - Accidents to machinery.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Accidents to machinery. 196.30-5 Section 196.30-5... Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  17. 36 CFR 1004.4 - Report of motor vehicle accident.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... accident. 1004.4 Section 1004.4 Parks, Forests, and Public Property PRESIDIO TRUST VEHICLES AND TRAFFIC SAFETY § 1004.4 Report of motor vehicle accident. (a) The operator of a motor vehicle involved in an accident resulting in property damage, personal injury or death shall report the accident to the...

  18. 46 CFR 196.30-5 - Accidents to machinery.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Accidents to machinery. 196.30-5 Section 196.30-5... Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  19. 14 CFR 415.41 - Accident investigation plan.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Accident investigation plan. 415.41 Section... Launch Range § 415.41 Accident investigation plan. An applicant must file an accident investigation plan... reporting and responding to launch accidents, launch incidents, or other mishaps, as defined by § 401.5...

  20. 29 CFR 1960.70 - Reporting of serious accidents.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 9 2014-07-01 2014-07-01 false Reporting of serious accidents. 1960.70 Section 1960.70... accidents. Agencies must provide the Office of Federal Agency Programs with a summary report of each fatal and catastrophic accident investigation. The summaries shall address the date/time of accident,...

  1. 50 CFR 25.72 - Reporting of accidents.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 9 2014-10-01 2014-10-01 false Reporting of accidents. 25.72 Section 25... Reporting of accidents. Accidents involving damage to property, injury to the public or injury to wildlife..., but in no event later than 24 hours after the accident, by the persons involved, to the refuge...

  2. 46 CFR 97.30-5 - Accidents to machinery.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Accidents to machinery. 97.30-5 Section 97.30-5 Shipping... Reports of Accidents, Repairs, and Unsafe Equipment § 97.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  3. 49 CFR 382.209 - Use following an accident.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Use following an accident. 382.209 Section 382.209... ALCOHOL USE AND TESTING Prohibitions § 382.209 Use following an accident. No driver required to take a post-accident alcohol test under § 382.303 shall use alcohol for eight hours following the accident,...

  4. 46 CFR 97.30-5 - Accidents to machinery.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Accidents to machinery. 97.30-5 Section 97.30-5 Shipping... Reports of Accidents, Repairs, and Unsafe Equipment § 97.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  5. 46 CFR 196.30-5 - Accidents to machinery.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Accidents to machinery. 196.30-5 Section 196.30-5... Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  6. 29 CFR 1960.70 - Reporting of serious accidents.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 9 2013-07-01 2013-07-01 false Reporting of serious accidents. 1960.70 Section 1960.70... accidents. Agencies must provide the Office of Federal Agency Programs with a summary report of each fatal and catastrophic accident investigation. The summaries shall address the date/time of accident,...

  7. 29 CFR 1926.200 - Accident prevention signs and tags.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Accident prevention signs and tags. 1926.200 Section 1926... § 1926.200 Accident prevention signs and tags. (a) General. Signs and symbols required by this subpart.... (h) Accident prevention tags. (1) Accident prevention tags shall be used as a temporary means...

  8. 29 CFR 1960.70 - Reporting of serious accidents.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 9 2011-07-01 2011-07-01 false Reporting of serious accidents. 1960.70 Section 1960.70... accidents. Agencies must provide the Office of Federal Agency Programs with a summary report of each fatal and catastrophic accident investigation. The summaries shall address the date/time of accident,...

  9. 14 CFR 415.41 - Accident investigation plan.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Accident investigation plan. 415.41 Section... Launch Range § 415.41 Accident investigation plan. An applicant must file an accident investigation plan... reporting and responding to launch accidents, launch incidents, or other mishaps, as defined by § 401.5...

  10. 46 CFR 196.30-5 - Accidents to machinery.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Accidents to machinery. 196.30-5 Section 196.30-5... Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  11. 29 CFR 1960.70 - Reporting of serious accidents.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 9 2012-07-01 2012-07-01 false Reporting of serious accidents. 1960.70 Section 1960.70... accidents. Agencies must provide the Office of Federal Agency Programs with a summary report of each fatal and catastrophic accident investigation. The summaries shall address the date/time of accident,...

  12. 50 CFR 25.72 - Reporting of accidents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 9 2012-10-01 2012-10-01 false Reporting of accidents. 25.72 Section 25... Reporting of accidents. Accidents involving damage to property, injury to the public or injury to wildlife..., but in no event later than 24 hours after the accident, by the persons involved, to the refuge...

  13. 50 CFR 25.72 - Reporting of accidents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 9 2013-10-01 2013-10-01 false Reporting of accidents. 25.72 Section 25... Reporting of accidents. Accidents involving damage to property, injury to the public or injury to wildlife..., but in no event later than 24 hours after the accident, by the persons involved, to the refuge...

  14. 46 CFR 97.30-5 - Accidents to machinery.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Accidents to machinery. 97.30-5 Section 97.30-5 Shipping... Reports of Accidents, Repairs, and Unsafe Equipment § 97.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  15. 36 CFR 1004.4 - Report of motor vehicle accident.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... accident. 1004.4 Section 1004.4 Parks, Forests, and Public Property PRESIDIO TRUST VEHICLES AND TRAFFIC SAFETY § 1004.4 Report of motor vehicle accident. (a) The operator of a motor vehicle involved in an accident resulting in property damage, personal injury or death shall report the accident to the...

  16. 14 CFR 415.41 - Accident investigation plan.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Accident investigation plan. 415.41 Section... Launch Range § 415.41 Accident investigation plan. An applicant must file an accident investigation plan... reporting and responding to launch accidents, launch incidents, or other mishaps, as defined by § 401.5...

  17. 14 CFR 415.41 - Accident investigation plan.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Accident investigation plan. 415.41 Section... Launch Range § 415.41 Accident investigation plan. An applicant must file an accident investigation plan... reporting and responding to launch accidents, launch incidents, or other mishaps, as defined by § 401.5...

  18. 36 CFR 1004.4 - Report of motor vehicle accident.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... accident. 1004.4 Section 1004.4 Parks, Forests, and Public Property PRESIDIO TRUST VEHICLES AND TRAFFIC SAFETY § 1004.4 Report of motor vehicle accident. (a) The operator of a motor vehicle involved in an accident resulting in property damage, personal injury or death shall report the accident to the...

  19. 29 CFR 1926.200 - Accident prevention signs and tags.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Accident prevention signs and tags. 1926.200 Section 1926... § 1926.200 Accident prevention signs and tags. (a) General. Signs and symbols required by this subpart.... (h) Accident prevention tags. (1) Accident prevention tags shall be used as a temporary means...

  20. 29 CFR 1926.200 - Accident prevention signs and tags.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Accident prevention signs and tags. 1926.200 Section 1926... § 1926.200 Accident prevention signs and tags. (a) General. Signs and symbols required by this subpart.... (h) Accident prevention tags. (1) Accident prevention tags shall be used as a temporary means...

  1. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... public accident investigation dockets, and accident database data. 837.3 Section 837.3 Transportation... OF RECORDS IN LEGAL PROCEEDINGS § 837.3 Published reports, material contained in the public accident investigation dockets, and accident database data. (a) Demands for material contained in the NTSB's...

  2. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... public accident investigation dockets, and accident database data. 837.3 Section 837.3 Transportation... OF RECORDS IN LEGAL PROCEEDINGS § 837.3 Published reports, material contained in the public accident investigation dockets, and accident database data. (a) Demands for material contained in the NTSB's...

  3. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... public accident investigation dockets, and accident database data. 837.3 Section 837.3 Transportation... OF RECORDS IN LEGAL PROCEEDINGS § 837.3 Published reports, material contained in the public accident investigation dockets, and accident database data. (a) Demands for material contained in the NTSB's...

  4. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... public accident investigation dockets, and accident database data. 837.3 Section 837.3 Transportation... OF RECORDS IN LEGAL PROCEEDINGS § 837.3 Published reports, material contained in the public accident investigation dockets, and accident database data. (a) Demands for material contained in the NTSB's...

  5. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... public accident investigation dockets, and accident database data. 837.3 Section 837.3 Transportation... OF RECORDS IN LEGAL PROCEEDINGS § 837.3 Published reports, material contained in the public accident investigation dockets, and accident database data. (a) Demands for material contained in the NTSB's...

  6. An epidemiological analysis of drunk driving accidents in Kagawa Prefecture - comparison of 1997-2000 and 2003-2006.

    PubMed

    Fujita, Yoshitsugu; Inoue, Ken; Sakuta, Akira; Seki, Nobuhiko; Miyazawa, Teruomi; Eguchi, Kenji

    2008-10-01

    In this study, we examined the number of drunk driving accidents and drunk driving accident toll in 1997-2000 and 2003-2006 for Kagawa Prefecture, which had Japan's highest number of traffic accident fatalities per 100,000 population.

  7. Finite element analysis of head-neck kinematics during motor vehicle accidents: analysis in multiple planes.

    PubMed

    Teo, Ee Chon; Zhang, Qing Hang; Huang, Russel C

    2007-01-01

    In this study, a detailed three-dimensional head-neck (C0-C7) finite element (FE) model developed previously based on the actual geometry of a human cadaver specimen was used. Five simulation analyses were performed to investigate the kinematic responses of the head-neck complex under rear-end, front, side, rear- and front-side impacts. Under rear-end and front impacts, it was predicted that the global and intervertebral rotations of the head-neck in the sagittal plane displayed nearly symmetric curvatures about the frontal plane. The primary sagittal rotational angles of the neck under direct front and rear-end impact conditions were higher than the primary frontal rotational angles under other side impact conditions. The analysis predicted early S-shaped and subsequent C-shaped curvatures of the head-neck complex in the sagittal plane under front and rear-end impact, and in the frontal plane under side impact. The head-neck complex flexed laterally in one direction with peak magnitude of larger than 22 degrees and a duration of about 130 ms before flexing in the opposite direction under both side and rear-side impact, compared to the corresponding values of about 15 degrees and 105 ms under front-side impact. The C0-C7 FE model has reasonably predicted the effects of impact direction in the primary sagittal and frontal segmental motion and curvatures of the head-neck complex under various impact conditions.

  8. Automated dimensional analysis using a light-sectioning microscope

    SciTech Connect

    Loomis, J.; Lightman, A.; Poe, A.; Caldwell, R.

    1988-12-31

    A computer vision system has been integrated with a modified light-sectioning microscope for quality control and inspection of a machined part whose critical dimensions are 30 to 300 {mu}m. Height measurements were determined by analysis of the projected light-section line. Transverse measurements were made using the microscope in a traditional configuration with illumination from selected elements of an external LED ring array. The light section irradiance was under computer control to accommodate the spatial variations in surface reflectance whose dynamic range exceeded that of the vision system. Part features are located by the vision system. Edges and line centers are then measured to sub-pixel resolution with a gray-level analysis algorithm. This paper describes the design and operation of this system. Details of the measurement process and analysis algorithms are provided.

  9. Analysis of Japanese Radionuclide Monitoring Data of Food Before and After the Fukushima Nuclear Accident

    PubMed Central

    2015-01-01

    In an unprecedented food monitoring campaign for radionuclides, the Japanese government took action to secure food safety after the Fukushima nuclear accident (Mar. 11, 2011). In this work we analyze a part of the immense data set, in particular radiocesium contaminations in food from the first year after the accident. Activity concentrations in vegetables peaked immediately after the campaign had commenced, but they decreased quickly, so that by early summer 2011 only a few samples exceeded the regulatory limits. Later, accumulating mushrooms and dried produce led to several exceedances of the limits again. Monitoring of meat started with significant delay, especially outside Fukushima prefecture. After a buildup period, contamination levels of meat peaked by July 2011 (beef). Levels then decreased quickly, but peaked again in September 2011, which was primarily due to boar meat (a known accumulator of radiocesium). Tap water was less contaminated; any restrictions for tap water were canceled by April 1, 2011. Pre-Fukushima 137Cs and 90Sr levels (resulting from atmospheric nuclear explosions) in food were typically lower than 0.5 Bq/kg, whereby meat was typically higher in 137Cs and vegetarian produce was usually higher in 90Sr. The correlation of background radiostrontium and radiocesium indicated that the regulatory assumption after the Fukushima accident of a maximum activity of 90Sr being 10% of the respective 137Cs concentrations may soon be at risk, as the 90Sr/137Cs ratio increases with time. This should be taken into account for the current Japanese food policy as the current regulation will soon underestimate the 90Sr content of Japanese foods. PMID:25621976

  10. Analysis of Japanese radionuclide monitoring data of food before and after the Fukushima nuclear accident.

    PubMed

    Merz, Stefan; Shozugawa, Katsumi; Steinhauser, Georg

    2015-03-03

    In an unprecedented food monitoring campaign for radionuclides, the Japanese government took action to secure food safety after the Fukushima nuclear accident (Mar. 11, 2011). In this work we analyze a part of the immense data set, in particular radiocesium contaminations in food from the first year after the accident. Activity concentrations in vegetables peaked immediately after the campaign had commenced, but they decreased quickly, so that by early summer 2011 only a few samples exceeded the regulatory limits. Later, accumulating mushrooms and dried produce led to several exceedances of the limits again. Monitoring of meat started with significant delay, especially outside Fukushima prefecture. After a buildup period, contamination levels of meat peaked by July 2011 (beef). Levels then decreased quickly, but peaked again in September 2011, which was primarily due to boar meat (a known accumulator of radiocesium). Tap water was less contaminated; any restrictions for tap water were canceled by April 1, 2011. Pre-Fukushima (137)Cs and (90)Sr levels (resulting from atmospheric nuclear explosions) in food were typically lower than 0.5 Bq/kg, whereby meat was typically higher in (137)Cs and vegetarian produce was usually higher in (90)Sr. The correlation of background radiostrontium and radiocesium indicated that the regulatory assumption after the Fukushima accident of a maximum activity of (90)Sr being 10% of the respective (137)Cs concentrations may soon be at risk, as the (90)Sr/(137)Cs ratio increases with time. This should be taken into account for the current Japanese food policy as the current regulation will soon underestimate the (90)Sr content of Japanese foods.

  11. SACO-1: a fast-running LMFBR accident-analysis code

    SciTech Connect

    Mueller, C.J.; Cahalan, J.E.; Vaurio, J.K.

    1980-01-01

    SACO is a fast-running computer code that simulates hypothetical accidents in liquid-metal fast breeder reactors to the point of permanent subcriticality or to the initiation of a prompt-critical excursion. In the tradition of the SAS codes, each subassembly is modeled by a representative fuel pin with three distinct axial regions to simulate the blanket and core regions. However, analytic and integral models are used wherever possible to cut down the computing time and storage requirements. The physical models and basic equations are described in detail. Comparisons of SACO results to analogous SAS3D results comprise the qualifications of SACO and are illustrated and discussed.

  12. Analysis of a small break loss-of-coolant accident of pressurized water reactor by APROS

    SciTech Connect

    Al-Falahi, A.; Haennine, M.; Porkholm, K.

    1995-09-01

    The purpose of this paper is to study the capability of APROS (Advanced PROcess Simulator) code to simulate the real plant thermal-hydraulic transient of a Small Break Loss-Of-Coolant Accident (SBLOCA) of Loss-Of-Fluid Test (LOFT) facility. The LOFT is a scaled model of a Pressurized Water Reactor (PWR). This work is a part of a larger validation of the APROS thermal-hydraulic models. The results of SBLOCA transient calculated by APROS showed a reasonable agreement with the measured data.

  13. Resolve! Version 2.5: Flammable Gas Accident Analysis Tool Acceptance Test Plan and Test Results

    SciTech Connect

    LAVENDER, J.C.

    2000-10-17

    RESOLVE! Version 2 .5 is designed to quantify the risk and uncertainty of combustion accidents in double-shell tanks (DSTs) and single-shell tanks (SSTs). The purpose of the acceptance testing is to ensure that all of the options and features of the computer code run; to verify that the calculated results are consistent with each other; and to evaluate the effects of the changes to the parameter values on the frequency and consequence trends associated with flammable gas deflagrations or detonations.

  14. Bayesian spatial and ecological models for small-area accident and injury analysis.

    PubMed

    MacNab, Ying C

    2004-11-01

    In this article, recently developed Bayesian spatial and ecological regression models are applied to analyse small-area variation in accident and injury. This study serves to demonstrate how Bayesian modelling techniques can be implemented to assess potential risk factors measured at group (e.g. area) level. Presented here is a unified modelling framework that enables thorough investigations into associations between injury rates and regional characteristics, residual variation and spatial autocorrelation. Using hospital separation data for 83 local health areas in British Columbia (BC), Canada, in 1990-1999, we explore and examine ecological/contextual determinants of motor vehicle accident injury (MVAI) among male children and youth aged 0-24 and for those of six age groups (<1, 1-4, 5-9, 10-14, 15-19 and 20-24). Eighteen local health area characteristics are studied. They include a broad spectrum of socio-economic indicators, residential environment indicators (roads and parks), medical services availability and utilisation, population health, proportion of recent immigrants, crime rates, rates of speeding charge and rates of seatbelt violation. Our study indicates a large regional variation in MVAI in males aged 0-24 in British Columbia, Canada, in 1990-1999, and that adjusting for appropriate risk factors eliminates nearly all the variation observed. Socio-economic influence on MVAI was profoundly apparent in young males of all ages with the injury being more common in communities of lower socio-economic status. High adult male crime rates were significantly associated with high injury rates of boys aged 1-14. Seatbelt violations and excess speeding charges were found to be positively associated with the injury rates of young men aged 20-24. This and similar ecological studies shed light on reasons for regional variations in accident occurrence as well as in the resulting injuries and hospital utilisation. Thereby they are potentially useful in identifying

  15. [Analysis of the implantation of the healthcare network for victims of accidents and violence following the guidelines of the National Policy for the Reduction of Morbidity and Mortality from Violence and Accidents].

    PubMed

    Minayo, Maria Cecília de Souza; Deslandes, Suely Ferreira

    2009-01-01

    In this article we problematize the results of an investigation entitled 'Diagnostic Analysis of the National Policy for Reduction of Morbidity and Mortality from Accidents and Violence (PNRMVA)' and present some thoughts for discussion. Based on a quantitative and qualitative analysis of the implantation of this policy in five Brazilian state capitals--Recife, Rio de Janeiro, Manaus, Curitiba and Brasília and vicinities--along with the participation of local academic institutions we performed a diagnosis of the situation. The article presents evaluative information regarding: the profile of morbidity and mortality from accidents and violence; the adequacy of mobile and fixed pre-hospital emergency services, hospital services and rehabilitation services to preventing the described epidemiological profile; the training of the professionals dealing with these traumas; surveillance and monitoring of violence and accidents as well as support for studies and investigations into the issue. Aimed at proposing a debate, the article concludes raising questions about the advances made in the implementation of the policy, about the fragilities of the system and about the possibilities for an efficient implementation of the PNRMVA guidelines.

  16. Sudden Water Pollution Accidents and Reservoir Emergency Operations: Impact Analysis at Danjiangkou Reservoir.

    PubMed

    Zheng, Hezhen; Shang, Yizi; Duan, Yang; Lei, Xiaohui; Kong, Lingzhong; Wang, Hao

    2017-03-29

    Danjiangkou Reservoir is the source reservoir of the Middle Route of the South-to-North Water Diversion Project (MRP). Any sudden water pollution accident in the reservoir would threaten the water supply of the MRP. We established a 3-D hydrodynamic and water quality model for Danjiangkou Reservoir, and proposed scientific suggestions on the prevention and emergency management for sudden water pollution accidents based on simulated results. Simulations were performed on 20 hypothetical pollutant discharge locations and 3 assumed amounts, in order to model the effect of pollutant spreading under different reservoir operation types. The results showed that both the location and mass of pollution affected water quality; however, different reservoir operation types had little effect. Five joint regulation scenarios, which altered the hydrodynamic processes of water conveyance for the Danjiangkou and Taocha Dams, were considered for controlling pollution dispersion. The results showed that the spread of a pollutant could be effectively controlled through the joint regulation of the two dams and that the collaborative operation of the Danjiangkou and Taocha Dams is critical for ensuring the security of water quality along the MRP.

  17. Analysis of an AP600 intermediate-size loss-of-coolant accident

    SciTech Connect

    Boyack, B.E.; Lime, J.F.

    1995-09-01

    A postulated double-ended guillotine break of an AP600 direct-vessel-injection line has been analyzed. This event is characterized as an intermediate-break loss-of-coolant accident. Most of the insights regarding the response of the AP600 safety systems to the postulated accident are derived from calculations preformed with the TRAC-PF1/MOD2 code. However, complementary insights derived from a scaled experiment conducted in the ROSA facility, as well as insights based upon calculations by other codes, are also presented. Based upon the calculated and experimental results, the AP600 will not experience a core heat up and will reach a safe shutdown state using only safety-class equipment. Only the early part of the long-term cooling period initiated by In-containment Refueling Water Storage Tank injection was evaluated. Thus, the observation that the core is continuously cooled should be verified for the later phase of the long-term cooling period when sump injection and containment cooling processes are important.

  18. Health effects models for nuclear power plant accident consequence analysis. Part 1, Introduction, integration, and summary: Revision 2

    SciTech Connect

    Evans, J.S.; Abrahmson, S.; Bender, M.A.; Boecker, B.B.; Scott, B.R.; Gilbert, E.S.

    1993-10-01

    This report is a revision of NUREG/CR-4214, Rev. 1, Part 1 (1990), Health Effects Models for Nuclear Power Plant Accident Consequence Analysis. This revision has been made to incorporate changes to the Health Effects Models recommended in two addenda to the NUREG/CR-4214, Rev. 1, Part 11, 1989 report. The first of these addenda provided recommended changes to the health effects models for low-LET radiations based on recent reports from UNSCEAR, ICRP and NAS/NRC (BEIR V). The second addendum presented changes needed to incorporate alpha-emitting radionuclides into the accident exposure source term. As in the earlier version of this report, models are provided for early and continuing effects, cancers and thyroid nodules, and genetic effects. Weibull dose-response functions are recommended for evaluating the risks of early and continuing health effects. Three potentially lethal early effects -- the hematopoietic, pulmonary, and gastrointestinal syndromes are considered. Linear and linear-quadratic models are recommended for estimating the risks of seven types of cancer in adults - leukemia, bone, lung, breast, gastrointestinal, thyroid, and ``other``. For most cancers, both incidence and mortality are addressed. Five classes of genetic diseases -- dominant, x-linked, aneuploidy, unbalanced translocations, and multifactorial diseases are also considered. Data are provided that should enable analysts to consider the timing and severity of each type of health risk.

  19. Weather types and traffic accidents.

    PubMed

    Klaić, Z B

    2001-06-01

    Traffic accident data for the Zagreb area for the 1981-1982 period were analyzed to investigate possible relationships between the daily number of accidents and the weather conditions that occurred for the 5 consecutive days, starting two days before the particular day. In the statistical analysis of low accident days weather type classification developed by Poje was used. For the high accident days a detailed analyses of surface and radiosonde data were performed in order to identify possible front passages. A test for independence by contingency table confirmed that conditional probability of the day with small number of accidents is the highest, provided that one day after it "N" or "NW" weather types occur, while it is the smallest for "N1" and "Bc" types. For the remaining 4 days of the examined periods dependence was not statistically confirmed. However, northern ("N", "NE" and "NW") and anticyclonic ("Vc", "V4", "V3", "V2" and "mv") weather types predominated during 5-days intervals related to the days with small number of accidents. On the contrary, the weather types with cyclonic characteristics ("N1", "N2", "N3", "Bc", "Dol1" and "Dol"), that are generally accompanied by fronts, were the rarest. For 85% days with large number of accidents, which had not been caused by objective circumstances (such as poor visibility, damaged or slippery road etc.), at least one front passage was recorded during the 3-days period, starting one day before the day with large number of accidents.

  20. An aftermath analysis of the 2014 coal mine accident in Soma, Turkey: Use of risk performance indicators based on historical experience.

    PubMed

    Spada, Matteo; Burgherr, Peter

    2016-02-01

    On the 13th of May 2014 a fire related incident in the Soma coal mine in Turkey caused 301 fatalities and more than 80 injuries. This has been the largest coal mine accident in Turkey, and in the OECD country group, so far. This study investigated if such a disastrous event should be expected, in a statistical sense, based on historical observations. For this purpose, PSI's ENSAD database is used to extract accident data for the period 1970-2014. Four different cases are analyzed, i.e., OECD, OECD w/o Turkey, Turkey and USA. Analysis of temporal trends for annual numbers of accidents and fatalities indicated a non-significant decreasing tendency for OECD and OECD w/o Turkey and a significant one for USA, whereas for Turkey both measures showed an increase over time. The expectation analysis revealed clearly that an event with the consequences of the Soma accident is rather unlikely for OECD, OECD w/o Turkey and USA. In contrast, such a severe accident has a substantially higher expectation for Turkey, i.e. it cannot be considered an extremely rare event, based on historical experience. This indicates a need for improved safety measures and stricter regulations in the Turkish coal mining sector in order to get closer to the rest of OECD.

  1. SSME alternate turbopump (pump section) axial load analysis

    NASA Technical Reports Server (NTRS)

    Crease, G. A.; Rosello, A., Jr.; Fetfatsidis, A. K.

    1989-01-01

    A flow balancing computer program constructed to calculate the axial loads on the Space Shuttle Main Engine (SSME) alternate turbopumps (ATs) pump sections are described. The loads are used in turn to determine load balancing piston design requirements. The application of the program to the inlet section, inducer/impeller/stage, bearings, seals, labyrinth, damper, piston, face and corner, and stationary/rotating surfaces is indicated. Design analysis results are reported which show that the balancing piston's designs are adequate and that performance and life will not be degraded by the turbopump's axial load characteristics.

  2. The Gulf of Mexico oil rig accident: analysis by different SAR satellite images

    NASA Astrophysics Data System (ADS)

    Del Frate, Fabio; Giacomini, Andrea; Latini, Daniele; Solimini, Domenico; Emery, William J.

    2011-11-01

    The management of the monitoring oil spills over the sea surface is a very important and actual task for international environmental agencies, due to the continuous risks represented by possible accidents involving either rigs or tankers. On the other hand the increase of remote sensing space missions can definitely improve our capabilities in this kind of activity. In this paper we consider the dramatic Gulf of Mexico oil spill event of 2010 to investigate on the types of information that could be provided by the available SAR images collection which included different polarizations and bands. With an eye to the implementation of fully automatic processing chains, an assessment of a novel segmentation technique based on PCNN (Pulse Coupled Neural Networks) was also carried out.

  3. Supplementary documentation for an Environmental Impact Statement regarding the Pantex Plant: dispersion analysis for postulated accidents

    SciTech Connect

    Dewart, J.M.; Bowen, B.M.; Elder, J.C.

    1982-12-01

    This report documents work performed in support of preparation of an Environmental Impact Statement (EIS) regarding the Department of Energy (DOE) Pantex Plant near Amarillo, Texas. The report covers the calculation of atmospheric dispersion and deposition of plutonium following postulated nonnuclear detonations of nuclear weapons. Downwind total integrated air concentrations and ground deposition values for each postulated accident are presented. The model used to perform these calculations is the DIFOUT model, developed at Sandia National Laboratories in conjunction with Operation Roller Coaster, a field experiment involving sampling and measurements of nuclear material dispersed by four detonations. The DIFOUT model is described along with the detonation cloud sizes, aerosol parameters, and meteorological data used as input data. A verification study of the DIFOUT model has also been performed; the results are presented.

  4. Uncertainty analysis of preclosure accident doses for the Yucca Mountain repository

    SciTech Connect

    Ma, C.W.; Miller, D.D.; Zavoshy, S.J.; Jardine, L.J.

    1990-12-31

    This study presents a generic methodology that can be used to evaluate the uncertainty in the calculated accidental offsite doses at the Yucca Mountain repository during the preclosure period. For demonstration purposes, this methodology is applied to two specific accident scenarios: the first involves a crane dropping an open container with consolidated fuel rods, the second involves container failure during emplacement or removal operations. The uncertainties of thirteen parameters are quantified by various types of probability distributions. The Latin Hypercube Sampling method is used to evaluate the uncertainty of the offsite dose. For the crane-drop scenario with concurrent filter failure, the doses due to the release of airborne fuel particles are calculated to be 0.019, 0.32, and 2.8 rem at confidence levels of 10%, 50%, and 90%, respectively. For the container failure scenario with concurrent filter failure, the 90% confidence-level dose is 0.21 rem. 20 refs., 4 figs., 3 tabs.

  5. TRANSIENT ACCIDENT ANALYSIS OF THE GLOVEBOX SYSTEM IN A LARGE PROCESS ROOM

    SciTech Connect

    Lee, S

    2008-01-11

    Local transient hydrogen concentrations were evaluated inside a large process room when the hydrogen gas was released by three postulated accident scenarios associated with the process tank leakage and fire leading to a loss of gas confinement. The three cases considered in this work were fire in a room, loss of confinement from a process tank, and loss of confinement coupled with fire event. Based on these accident scenarios in a large and unventilated process room, the modeling calculations of the hydrogen migration were performed to estimate local transient concentrations of hydrogen due to the sudden leakage and release from a glovebox system associated with the process tank. The modeling domain represented the major features of the process room including the principal release or leakage source of gas storage system. The model was benchmarked against the literature results for key phenomena such as natural convection, turbulent behavior, gas mixing due to jet entrainment, and radiation cooling because these phenomena are closely related to the gas driving mechanisms within a large air space of the process room. The modeling results showed that at the corner of the process room, the gas concentrations migrated by the Case 2 and Case 3 scenarios reached the set-point value of high activity alarm in about 13 seconds, while the Case 1 scenario takes about 90 seconds to reach the concentration. The modeling results were used to estimate transient radioactive gas migrations in an enclosed process room installed with high activity alarm monitor when the postulated leakage scenarios are initiated without room ventilation.

  6. Biomechanical analysis of protective countermeasures in underride motor vehicle accidents - biomed 2009.

    PubMed

    Kumar, Sri; Enz, Bruce; Ponder, Perry L; Anderson, Bob

    2009-01-01

    Traffic safety has been significantly improved over the past several decades reducing injury and fatality rates. However, there is a paucity of research effort to address the safety issues in underride accidents, specifically the side underride crashes. It is well known that the compromise of occupant space in the vehicle leads to a higher probability of serious or fatal injuries. A better understanding of occupant protection and mechanism of injuries involved in side underride accidents assists in the advancement of safety measures. The present work evaluates the injury potential to occupants during side underride crashes using the car-to-trailer crash methodology. Four crash tests were conducted into the side of a stationary trailer fitted with the side underride guard system (SURG). The SURG used in these tests is 25% lighter than the previous design. A 5th percentile hybrid III female dummy was placed in the driver seat and restrained with the three-point lap and shoulder harness. The anthropometric dummy was instrumented with a head triaxial accelerometer, a chest triaxal accelerometer, a load cell to measure neck force and moment, and a load cell to measure the femur force. The vehicle acceleration was measured using a traxial accelerometer in the rear center tunnel. High speed, standard video and still photos were taken. In all tests, the intrusion was limited to the front structure of the vehicle without any significant compromise to the occupant space. Results indicate that the resultant head and chest accelerations, head injury criterion (HIC), neck force and moment, and femur force were well below the injury tolerance. The present findings support the hypothesis that the SURG not only limits or eliminates the intrusion into the occupant space but also results in biomechanical injury values well below the tolerance limit in motor vehicle crashes.

  7. Analysis of sertraline in postmortem fluids and tissues in 11 aviation accident victims.

    PubMed

    Lewis, Russell J; Angier, Mike K; Williamson, Kelly S; Johnson, Robert D

    2013-05-01

    Sertraline (Zoloft) is a selective serotonin reuptake inhibitor that is a commonly prescribed drug for the treatment of depression, obsessive-compulsive disorder, panic disorder, social anxiety disorder, premenstrual dysphoric disorder and post-traumatic stress disorder. Although the use of sertraline is relatively safe, certain side effects may negatively affect a pilot's performance and become a factor in an aviation accident. The authors' laboratory investigated the distribution of sertraline and its primary metabolite, desmethylsertraline, in various postmortem tissues and fluids obtained from 11 fatal aviation accident cases between 2001 and 2004. Eleven specimen types were analyzed for each case, including blood, urine, vitreous humor, liver, lung, kidney, spleen, muscle, brain, heart and bile. Human specimens were processed utilizing solid-phase extraction, followed by characterization and quantitation employing gas chromatography-mass spectrometry. Whole blood sertraline concentrations obtained from these 11 cases ranged from 0.005 to 0.392 µg/mL. The distribution coefficients of sertraline, expressed as specimen/blood ratio, were as follows: urine, 0.47 ± 0.39 (n = 6); vitreous humor, 0.02 ± 0.01 (n = 4); liver, 74 ± 59 (n = 11); lung, 67 ± 45 (n = 11); kidney, 7.4 ± 5 (n = 11); spleen, 46 ± 45 (n = 10); muscle, 2.1 ± 1.3 (n = 8); brain, 22 ± 14 (n = 10); heart, 9 ± 7 (n = 11); and bile, 36 ± 26 (n = 8). Postmortem distribution coefficients obtained for sertraline had coefficients of variation ranging from 47-99%. This study suggests that sertraline likely undergoes significant postmortem redistribution.

  8. Probabilistic accident consequence uncertainty analysis: Food chain uncertainty assessment. Volume 2: Appendices

    SciTech Connect

    Brown, J.; Goossens, L.H.J.; Kraan, B.C.P.

    1997-06-01

    This volume is the second of a two-volume document that summarizes a joint project by the US Nuclear Regulatory and the Commission of European Communities to assess uncertainties in the MACCS and COSYMA probabilistic accident consequence codes. These codes were developed primarily for estimating the risks presented by nuclear reactors based on postulated frequencies and magnitudes of potential accidents. This two-volume report, which examines mechanisms and uncertainties of transfer through the food chain, is the first in a series of five such reports. A panel of sixteen experts was formed to compile credible and traceable uncertainty distributions for food chain transfer that affect calculations of offsite radiological consequences. Seven of the experts reported on transfer into the food chain through soil and plants, nine reported on transfer via food products from animals, and two reported on both. The expert judgment elicitation procedure and its outcomes are described in these volumes. This volume contains seven appendices. Appendix A presents a brief discussion of the MAACS and COSYMA model codes. Appendix B is the structure document and elicitation questionnaire for the expert panel on soils and plants. Appendix C presents the rationales and responses of each of the members of the soils and plants expert panel. Appendix D is the structure document and elicitation questionnaire for the expert panel on animal transfer. The rationales and responses of each of the experts on animal transfer are given in Appendix E. Brief biographies of the food chain expert panel members are provided in Appendix F. Aggregated results of expert responses are presented in graph format in Appendix G.

  9. Shipping container response to severe highway and railway accident conditions: Appendices

    SciTech Connect

    Fischer, L.E.; Chou, C.K.; Gerhard, M.A.; Kimura, C.Y.; Martin, R.W.; Mensing, R.W.; Mount, M.E.; Witte, M.C.

    1987-02-01

    Volume 2 contains the following appendices: Severe accident data; truck accident data; railroad accident data; highway survey data and bridge column properties; structural analysis; thermal analysis; probability estimation techniques; and benchmarking for computer codes used in impact analysis. (LN)

  10. PF-4 simulated fire accident analysis: Filter-spray cool-down system reevaluation implications

    SciTech Connect

    White, B.W.; Gregory, W.S.

    1990-10-01

    The Los Alamos National Laboratory PF-4 facility was designed with spray cool down systems within the building's ventilation systems. The Engineering and Safety Analysis Group was asked, in cooperation with ENG-8 and MST-8, to evaluate whether the spray cool-down system still need to be classified as safety class'' systems. The study was performed using the FIRAC computer code. Given the fire source terms (hypothetical fire energy or time-temperature history), FIRAC can predict the pertinent transient flow parameters (pressures, flows, and temperatures) throughout a previously defined and selected fire zone. A computer model for the study that had all of the main ventilation systems in the south half of the PF-4 facility was used. Because the most hazardous room is located in the 400 Section, all ventilation systems but the 400 Section's one were simplified. The impetus for simplification was to keep the computer model tractable, and this was possible with the following assumptions: the fire cannot spread from one room to another, all corridor connecting doors are closed and will not fail under the pressures generated by the fire, and the principal pathway for potential release is the ventilation system. All of the blowers continue to operate, and all fire retardant systems fail to operate during the fire. The ASTM time-temperature curve was the source for the burn-room temperature, and smoke injection was used as input as well. Five different computer runs were made using different combinations of source terms and heat transfer. A connection from the burn room to the glovebox ventilation system was created by burning the glovebox plastic shielding; it was modeled by a branch having an initial flow 75 ft{sup 3}/min. 7 refs., 35 refs., 15 tabs.

  11. Tools for improving safety management in the Norwegian Fishing Fleet occupational accidents analysis period of 1998-2006.

    PubMed

    Aasjord, Halvard L

    2006-01-01

    Reporting of human accidents in the Norwegian Fishing Fleet has always been very difficult because there has been no tradition in making reports on all types of working accidents among fishermen, if the accident does not seem to be very serious or there is no economical incentive to report. Therefore reports are only written when the accidents are serious or if the fisherman is reported sick. Reports about an accident are sent to the insurance company, but another report should also be sent to the Norwegian Maritime Directorate (NMD). Comparing of data from one former insurance company and NMD shows that the real numbers of injuries or serious accidents among Norwegian fishermen could be up to two times more than the numbers reported to NMD. Special analyses of 1690 accidents from the so called PUS-database (NMD) for the period 1998-2002, show that the calculated risk was 23.6 accidents per 1000 man-years. This is quite a high risk level, and most of the accidents in the fishing fleet were rather serious. The calculated risks are highest for fishermen on board the deep sea fleet of trawlers (28.6 accidents per 1000 man-years) and also on the deep sea fleet of purse seiners (28.9 accidents per 1000 man-years). Fatal accidents over a longer period of 51.5 years from 1955 to 2006 are also roughly analysed. These data from SINTEF's own database show that the numbers of fatal accidents have been decreasing over this long period, except for the two periods 1980-84 and 1990-94 where we had some casualties with total losses of larger vessels with the loss of most of the crew, but also many others typical work accidents on smaller vessels. The total numbers of registered Norwegian fishermen and also the numbers of man-years have been drastically reduced over the 51.5 years from 1955 to 2006. The risks of fatal accidents have been very steady over time at a high level, although there has been a marked risk reduction since 1990-94. For the last 8.5-year period of January 1998

  12. Radiation accidents

    SciTech Connect

    Saenger, E.L.

    1986-09-01

    It is essential that emergency physicians understand ways to manage patients contaminated by radioactive materials and/or exposed to external radiation sources. Contamination accidents require careful surveys to identify the metabolic pathway of the radionuclides to guide prognosis and treatment. The level of treatment required will depend on careful surveys and meticulous decontamination. There is no specific therapy for the acute radiation syndrome. Prophylactic antibodies are desirable. For severely exposed patients treatment is similar to the supportive care given to patients undergoing organ transplantation. For high-dose extremity injury, no methods have been developed to reverse the fibrosing endarteritis that eventually leads to tissue death so frequently found with this type of injury. Although the Three Mile Island episode of March 1979 created tremendous public concern, there were no radiation injuries. The contamination outside the reactor building and the release of radioiodine were negligible. The accidental fuel element meltdown at Chernobyl, USSR, resulted in many cases of acute radiation syndrome. More than 100,000 people were exposed to high levels of radioactive fallout. The general principles outlined here are applicable to accidents of that degree of severity.

  13. Fault tree analysis of fire and explosion accidents for dual fuel (diesel/natural gas) ship engine rooms

    NASA Astrophysics Data System (ADS)

    Guan, Yifeng; Zhao, Jie; Shi, Tengfei; Zhu, Peipei

    2016-09-01

    In recent years, China's increased interest in environmental protection has led to a promotion of energy-efficient dual fuel (diesel/natural gas) ships in Chinese inland rivers. A natural gas as ship fuel may pose dangers of fire and explosion if a gas leak occurs. If explosions or fires occur in the engine rooms of a ship, heavy damage and losses will be incurred. In this paper, a fault tree model is presented that considers both fires and explosions in a dual fuel ship; in this model, dual fuel engine rooms are the top events. All the basic events along with the minimum cut sets are obtained through the analysis. The primary factors that affect accidents involving fires and explosions are determined by calculating the degree of structure importance of the basic events. According to these results, corresponding measures are proposed to ensure and improve the safety and reliability of Chinese inland dual fuel ships.

  14. DEFORM-4: fuel pin characterization and transient response in the SAS4A accident analysis code system

    SciTech Connect

    Miles, K.J.; Hill, D.J.

    1986-01-01

    The DEFORM-4 module is the segment of the SAS4A Accident Analysis Code System that calculates the fuel pin characterization in response to a steady state irradiation history, thereby providing the initial conditions for the transient calculation. The various phenomena considered include fuel porosity migration, fission gas bubble induced swelling, fuel cracking and healing, fission gas release, cladding swelling, and the thermal-mechanical state of the fuel and cladding. In the transient state, the module continues the thermal-mechanical response calculation, including fuel melting and central cavity pressurization, until cladding failure is predicted and one of the failed fuel modules is initiated. Comparisons with experimental data have demonstrated the validity of the modeling approach.

  15. Three-dimensional inelastic analysis methods for hot section components

    NASA Technical Reports Server (NTRS)

    Todd, E. S.

    1987-01-01

    The objective of this program is to produce a series of new computer codes that permit more accurate and efficient three-dimensional inelastic structural analysis of combustor liners, turbine blades, and turbine vanes. Each code embodies a progression of mathematical models for increasingly comprehensive representation of the geometrical features, loading conditions, and forms of nonlinear material response that distinguish these three groups of hot section components.

  16. On 3-D inelastic analysis methods for hot section components

    NASA Technical Reports Server (NTRS)

    Todd, E. S.

    1986-01-01

    The objective of this program is to produce a series of new computer codes that permit more accurate and efficient three-dimensional inelastic structural analysis of combustor liners, turbine blades, and turbine vanes. Each code embodies a progression of mathematical models for increasingly comprehensive representation of the geometrical features, loading conditions, and forms of nonlinear material response that distinguish these three groups of hot section components.

  17. Analysis of accident sequences and source terms at treatment and storage facilities for waste generated by US Department of Energy waste management operations

    SciTech Connect

    Mueller, C.; Nabelssi, B.; Roglans-Ribas, J.; Folga, S.; Policastro, A.; Freeman, W.; Jackson, R.; Mishima, J.; Turner, S.

    1996-12-01

    This report documents the methodology, computational framework, and results of facility accident analyses performed for the US Department of Energy (DOE) Waste Management Programmatic Environmental Impact Statement (WM PEIS). The accident sequences potentially important to human health risk are specified, their frequencies assessed, and the resultant radiological and chemical source terms evaluated. A personal-computer-based computational framework and database have been developed that provide these results as input to the WM PEIS for the calculation of human health risk impacts. The WM PEIS addresses management of five waste streams in the DOE complex: low-level waste (LLW), hazardous waste (HW), high-level waste (HLW), low-level mixed waste (LLMW), and transuranic waste (TRUW). Currently projected waste generation rates, storage inventories, and treatment process throughputs have been calculated for each of the waste streams. This report summarizes the accident analyses and aggregates the key results for each of the waste streams. Source terms are estimated, and results are presented for each of the major DOE sites and facilities by WM PEIS alternative for each waste stream. Key assumptions in the development of the source terms are identified. The appendices identify the potential atmospheric release of each toxic chemical or radionuclide for each accident scenario studied. They also discuss specific accident analysis data and guidance used or consulted in this report.

  18. Probabilistic accident consequence uncertainty analysis: Dispersion and deposition uncertainty assessment. Volume 3, Appendices C, D, E, F, and G

    SciTech Connect

    Harper, F.T.; Young, M.L.; Miller, L.A.

    1995-01-01

    The development of two new probabilistic accident consequence codes, MACCS and COSYMA, completed in 1990, estimate the risks presented by nuclear installations based on postulated frequencies and magnitudes of potential accidents. In 1991, the US Nuclear Regulatory Commission (NRC) and the Commission of the European Communities (CEC) began a joint uncertainty analysis of the two codes. The objective was to develop credible and traceable uncertainty distributions for the input variables of the codes. Expert elicitation, developed independently, was identified as the best technology available for developing a library of uncertainty distributions for the selected consequence parameters. The study was formulated jointly and was limited to the current code models and to physical quantities that could be measured in experiments. To validate the distributions generated for the wet deposition input variables, samples were taken from these distributions and propagated through the wet deposition code model along with the Gaussian plume model (GPM) implemented in the MACCS and COSYMA codes. Resulting distributions closely replicated the aggregated elicited wet deposition distributions. Project teams from the NRC and CEC cooperated successfully to develop and implement a unified process for the elaboration of uncertainty distributions on consequence code input parameters. Formal expert judgment elicitation proved valuable for synthesizing the best available information. Distributions on measurable atmospheric dispersion and deposition parameters were successfully elicited from experts involved in the many phenomenological areas of consequence analysis. This volume is the third of a three-volume document describing the project and contains descriptions of the probability assessment principles; the expert identification and selection process; the weighting methods used; the inverse modeling methods; case structures; and summaries of the consequence codes.

  19. Analysis of miners job attendence behavior and its relationship to miners accidents and injuries. Final report. Open file report, 21 September 1982-21 December 1985

    SciTech Connect

    Goodman, P.S.

    1985-10-01

    The report examines coal-miner absenteeism and its relationship to accidents and injuries at underground mines. A total of 19 mines participated in various phases of this 3-year project. Miners at the participating mines ranged in number from 185 to 776. The data consisted of the mines' daily attendance records and detailed interviews with approximately 50 miners from each mine. The interviews contained questions about the miners' satisfaction with various on-the-job and off-the-job factors, their perceptions of the mines' absenteeism policies, the reasons or causes for their own absences, and the miners' demographic characteristics. Accident and injury data from six mines were used in parametric and multiple regression analysis of the absenteeism-accident relationship. The data represented activity during approximately 80,000 miner-days worked. Strategies for reducing absenteeism are discussed.

  20. Episode analysis of deposition of radiocesium from the Fukushima Daiichi nuclear power plant accident.

    PubMed

    Morino, Yu; Ohara, Toshimasa; Watanabe, Mirai; Hayashi, Seiji; Nishizawa, Masato

    2013-03-05

    Chemical transport models played key roles in understanding the atmospheric behaviors and deposition patterns of radioactive materials emitted from the Fukushima Daiichi nuclear power plant after the nuclear accident that accompanied the great Tohoku earthquake and tsunami on 11 March 2011. However, model results could not be sufficiently evaluated because of limited observational data. We assess the model performance to simulate the deposition patterns of radiocesium ((137)Cs) by making use of airborne monitoring survey data for the first time. We conducted ten sensitivity simulations to evaluate the atmospheric model uncertainties associated with key model settings including emission data and wet deposition modules. We found that simulation using emissions estimated with a regional-scale (∼ 500 km) model better reproduced the observed (137)Cs deposition pattern in eastern Japan than simulation using emissions estimated with local-scale (∼ 50 km) or global-scale models. In addition, simulation using a process-based wet deposition module reproduced the observations well, whereas simulation using scavenging coefficients showed large uncertainties associated with empirical parameters. The best-available simulation reproduced the observed (137)Cs deposition rates in high-deposition areas (≥ 10 kBq m(-2)) within 1 order of magnitude and showed that deposition of radiocesium over land occurred predominantly during 15-16, 20-23, and 30-31 March 2011.

  1. Health effects models for nuclear power plant accident consequence analysis: Low LET radiation

    SciTech Connect

    Evans, J.S. . School of Public Health)

    1990-01-01

    This report describes dose-response models intended to be used in estimating the radiological health effects of nuclear power plant accidents. Models of early and continuing effects, cancers and thyroid nodules, and genetic effects are provided. Weibull dose-response functions are recommended for evaluating the risks of early and continuing health effects. Three potentially lethal early effects -- the hematopoietic, pulmonary, and gastrointestinal syndromes -- are considered. In addition, models are included for assessing the risks of several nonlethal early and continuing effects -- including prodromal vomiting and diarrhea, hypothyroidism and radiation thyroiditis, skin burns, reproductive effects, and pregnancy losses. Linear and linear-quadratic models are recommended for estimating cancer risks. Parameters are given for analyzing the risks of seven types of cancer in adults -- leukemia, bone, lung, breast, gastrointestinal, thyroid, and other.'' The category, other'' cancers, is intended to reflect the combined risks of multiple myeloma, lymphoma, and cancers of the bladder, kidney, brain, ovary, uterus and cervix. Models of childhood cancers due to in utero exposure are also developed. For most cancers, both incidence and mortality are addressed. The models of cancer risk are derived largely from information summarized in BEIR III -- with some adjustment to reflect more recent studies. 64 refs., 18 figs., 46 tabs.

  2. "Murder-suicide" or "murder-accident"? Difficulties with the analysis of cases.

    PubMed

    Byard, Roger W; Veldhoen, David; Kobus, Hilton; Heath, Karen

    2010-09-01

    Homicide where a perpetrator is found dead adjacent to the victim usually represents murder-suicide. Two incidents are reported to demonstrate characteristic features in one, and alternative features in the other, that indicate differences in the manner of death. (i) A 37-year-old mother was found dead in a burnt out house with her two young sons in an adjacent bedroom. Deaths were due to incineration and inhalation of products of combustion. (ii) A 39-year-old woman was found stabbed to death in a burnt out house with her 39-year-old de facto partner deceased from the combined effects of incineration and inhalation of products of combustion. The first incident represented a typical murder-suicide, however, in the second incident, the perpetrator had tried to escape through a window and had then sought refuge in a bathroom under a running shower. Murder-accident rather than murder-suicide may therefore be a more accurate designation for such cases.

  3. Spatiotemporal Analysis for Wildlife-Vehicle Based on Accident Statistics of the County Straubing-Bogen in Lower Bavaria

    NASA Astrophysics Data System (ADS)

    Pagany, R.; Dorner, W.

    2016-06-01

    During the last years the numbers of wildlife-vehicle-collisions (WVC) in Bavaria increased considerably. Despite the statistical registration of WVC and preventive measures at areas of risk along the roads, the number of such accidents could not be contained. Using geospatial analysis on WVC data of the last five years for county Straubing-Bogen, Bavaria, a small-scale methodology was found to analyse the risk of WVC along the roads in the investigated area. Various indicators were examined, which may be related to WVC. The risk depends on the time of the day and year which shows correlations in turn to the traffic density and wildlife population. Additionally the location of the collision depends on the species and on different environmental parameters. Accidents seem to correlate with the land use left and right of the street. Land use data and current vegetation were derived from remote sensing data, providing information of the general land use, also considering the vegetation period. For this a number of hot spots was selected to identify potential dependencies between land use, vegetation and season. First results from these hotspots show, that WVCs do not only depend on land use, but may show a correlation with the vegetation period. With regard to agriculture and seasonal as well as annual changes this indicates that warnings will fail due to their static character in contrast to the dynamic situation of land use and resulting risk for WVCs. This shows that there is a demand for remote sensing data with a high spatial and temporal resolution as well as a methodology to derive WVC warnings considering land use and vegetation. With remote sensing data, it could become possible to classify land use and calculate risk levels for WVC. Additional parameters, derived from remote sensed data that could be considered are relief and crops as well as other parameters such as ponds, natural and infrastructural barriers that could be related to animal behaviour and

  4. Severe Accident Scoping Simulations of Accident Tolerant Fuel Concepts for BWRs

    SciTech Connect

    Robb, Kevin R.

    2015-08-01

    CrAl would tend to generate heat and hydrogen from oxidation at a slower rate compared to the zirconium-based alloys in use today. The previous study, [2], of the FeCrAl ATF concept during station blackout (SBO) severe accident scenarios in BWRs was based on simulating short term SBO (STSBO), long term SBO (LTSBO), and modified SBO scenarios occurring in a BWR-4 reactor with MARK-I containment. The analysis indicated that FeCrAl had the potential to delay the onset of fuel failure by a few hours depending on the scenario, and it could delay lower head failure by several hours. The analysis demonstrated reduced in-vessel hydrogen production. However, the work was preliminary and was based on limited knowledge of material properties for FeCrAl. Limitations of the MELCOR code were identified for direct use in modeling ATF concepts. This effort used an older version of MELCOR (1.8.5). Since these analyses, the BWR model has been updated for use in MELCOR 1.8.6 [10], and more representative material properties for FeCrAl have been modeled. Sections 2 4 present updated analyses for the FeCrAl ATF concept response during severe accidents in a BWR. The purpose of the study is to estimate the potential gains afforded by the FeCrAl ATF concept during BWR SBO scenarios.

  5. Supplemental analysis of accident sequences and source terms for waste treatment and storage operations and related facilities for the US Department of Energy waste management programmatic environmental impact statement

    SciTech Connect

    Folga, S.; Mueller, C.; Nabelssi, B.; Kohout, E.; Mishima, J.

    1996-12-01

    This report presents supplemental information for the document Analysis of Accident Sequences and Source Terms at Waste Treatment, Storage, and Disposal Facilities for Waste Generated by US Department of Energy Waste Management Operations. Additional technical support information is supplied concerning treatment of transuranic waste by incineration and considering the Alternative Organic Treatment option for low-level mixed waste. The latest respirable airborne release fraction values published by the US Department of Energy for use in accident analysis have been used and are included as Appendix D, where respirable airborne release fraction is defined as the fraction of material exposed to accident stresses that could become airborne as a result of the accident. A set of dominant waste treatment processes and accident scenarios was selected for a screening-process analysis. A subset of results (release source terms) from this analysis is presented.

  6. SCALE system cross-section validation for criticality safety analysis

    SciTech Connect

    Hathout, A M; Westfall, R M; Dodds, Jr, H L

    1980-01-01

    The purpose of this study is to test selected data from three cross-section libraries for use in the criticality safety analysis of UO/sub 2/ fuel rod lattices. The libraries, which are distributed with the SCALE system, are used to analyze potential criticality problems which could arise in the industrial fuel cycle for PWR and BWR reactors. Fuel lattice criticality problems could occur in pool storage, dry storage with accidental moderation, shearing and dissolution of irradiated elements, and in fuel transport and storage due to inadequate packing and shipping cask design. The data were tested by using the SCALE system to analyze 25 recently performed critical experiments.

  7. 3D inelastic analysis methods for hot section components

    NASA Technical Reports Server (NTRS)

    Dame, L. T.; Chen, P. C.; Hartle, M. S.; Huang, H. T.

    1985-01-01

    The objective is to develop analytical tools capable of economically evaluating the cyclic time dependent plasticity which occurs in hot section engine components in areas of strain concentration resulting from the combination of both mechanical and thermal stresses. Three models were developed. A simple model performs time dependent inelastic analysis using the power law creep equation. The second model is the classical model of Professors Walter Haisler and David Allen of Texas A and M University. The third model is the unified model of Bodner, Partom, et al. All models were customized for linear variation of loads and temperatures with all material properties and constitutive models being temperature dependent.

  8. Cross sections of deposited layers investigated by micronuclear reaction analysis

    NASA Astrophysics Data System (ADS)

    Jet-Efda Contributors Petersson, P.; Bergsåker, H.; Possnert, G.; Coad, J. P.; Likonen, J.; Koivuranta, S.; Hakola, A.

    2011-08-01

    Cross sections of deposited layers from the divertor of the Joint European Torus (JET) have been investigated, microscopically and by ion microbeam analysis. The thickness of these layers on the studied samples varies between about 50 μm and 800 μm depending on the exposure time and poloidal location of the sample. For most of the thicker layers a laminar structure is observed. In some locations changes, such as gaps, are also observed along the laminar structure as well as more complex structures. The possibility to use the layers as historical reference was also investigated.

  9. [Accidents of toddlers and youngsters].

    PubMed

    von Nicolai, D

    2002-02-01

    The Public Health Department in Biberach an der Riss developed a questionnaire to investigate the incidence of accidents in children under school-starting age (6 years). This questionnaire was presented to the parents of more than 2,300 prospective first-graders from the town and rural district on the occasion of the pre-school medical examination 2000. As this examination is mandatory for all children starting school, and as the questions were answered by all the parents with very few exceptions (language reasons), a complete survey can be assumed. The investigation confirmed the results of last year: The incidence of children who suffered an accident requiring medical attention before reaching school age is approximately 33 %; boys are predominantly involved. The scene of accidents also changes with increasing age from living quarters to outside areas. The most frequent type of accidents are, of course, falls, resulting especially in injuries to the head and face. Scalds and burns, in particular at the age of 2, occur more frequently in the Biberach district than described in other up-to-date investigations in Germany. For this reason efforts have to be made to reduce this number over the next years. About 11 % of accidents occur in the streets or involve traffic, a result which is also higher in comparison to other investigations. According to the statement of parents, more than two-thirds of accidents are caused by the children themselves, including babies and toddlers. At the time of the accident 40 % of the children were without parental control, and 20 % completely alone.A great number of the accidents could certainly have been prevented. That is why the results of the study should be made available to all those responsible for the care and wellbeing of this age group. The last section of the paper deals with the most urgent needs of action to be implemented in the long run for the sake of the health of our children.

  10. Commuting accidents in the German chemical industry.

    PubMed

    Zepf, Kirsten Isabel; Letzel, Stephan; Voelter-Mahlknecht, Susanne; Wriede, Ulrich; Husemann, Britta; Escobar Pinzón, Luis Carlos

    2010-01-01

    Due to accident severity and the extent of claim payments commuting accidents are a significant expense factor in the German industry. Therefore the aim of the present study was the identification of risk factors for commuting accidents in a German chemical company. A retrospective analysis of commuting accidents recorded between 1990 and 2003 was conducted in a major chemical company in Germany. A logistic regression-model was calculated in order to determine factors influencing the duration of work inability as a result of commuting accidents. The analysed data included 5,484 employees with commuting accidents. Cars (33.1%) and bicycles (30.5%) were the most common types of vehicles used by commuters who had an accident. The highest number of commuting accidents was observed in the age group under 26 yr. Accidents on the route from the work site to the worker's residence were less frequently observed, but they caused longer periods of work inability than accidents on the way to the work site. The longest periods of work inability were found in the groups of motorcyclists and older employees. The present study identifies specific groups at risk for commuting accidents. The data of the present investigation also underline the need for developing group specific prevention strategies.

  11. 49 CFR 659.33 - Accident notification.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Accident notification. 659.33 Section 659.33 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION... Agency § 659.33 Accident notification. (a) The oversight agency must require the rail transit agency...

  12. 49 CFR 659.33 - Accident notification.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Accident notification. 659.33 Section 659.33 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION... Agency § 659.33 Accident notification. (a) The oversight agency must require the rail transit agency...

  13. 49 CFR 659.33 - Accident notification.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Accident notification. 659.33 Section 659.33 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION... Agency § 659.33 Accident notification. (a) The oversight agency must require the rail transit agency...

  14. 49 CFR 659.33 - Accident notification.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Accident notification. 659.33 Section 659.33 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION... Agency § 659.33 Accident notification. (a) The oversight agency must require the rail transit agency...

  15. 49 CFR 659.33 - Accident notification.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Accident notification. 659.33 Section 659.33 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION... Agency § 659.33 Accident notification. (a) The oversight agency must require the rail transit agency...

  16. 48 CFR 36.513 - Accident prevention.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Accident prevention. 36.513 Section 36.513 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL... prevention. (a) The contracting officer shall insert the clause at 52.236-13, Accident Prevention,...

  17. 48 CFR 36.513 - Accident prevention.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Accident prevention. 36.513 Section 36.513 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL... prevention. (a) The contracting officer shall insert the clause at 52.236-13, Accident Prevention,...

  18. Health effects model for nuclear power plant accident consequence analysis. Part I. Introduction, integration, and summary. Part II. Scientific basis for health effects models

    SciTech Connect

    Evans, J.S.; Moeller, D.W.; Cooper, D.W.

    1985-07-01

    Analysis of the radiological health effects of nuclear power plant accidents requires models for predicting early health effects, cancers and benign thyroid nodules, and genetic effects. Since the publication of the Reactor Safety Study, additional information on radiological health effects has become available. This report summarizes the efforts of a program designed to provide revised health effects models for nuclear power plant accident consequence modeling. The new models for early effects address four causes of mortality and nine categories of morbidity. The models for early effects are based upon two parameter Weibull functions. They permit evaluation of the influence of dose protraction and address the issue of variation in radiosensitivity among the population. The piecewise-linear dose-response models used in the Reactor Safety Study to predict cancers and thyroid nodules have been replaced by linear and linear-quadratic models. The new models reflect the most recently reported results of the follow-up of the survivors of the bombings of Hiroshima and Nagasaki and permit analysis of both morbidity and mortality. The new models for genetic effects allow prediction of genetic risks in each of the first five generations after an accident and include information on the relative severity of various classes of genetic effects. The uncertainty in modeloling radiological health risks is addressed by providing central, upper, and lower estimates of risks. An approach is outlined for summarizing the health consequences of nuclear power plant accidents. 298 refs., 9 figs., 49 tabs.

  19. An evaluation of wind turbine blade cross section analysis techniques.

    SciTech Connect

    Paquette, Joshua A.; Griffith, Daniel Todd; Laird, Daniel L.; Resor, Brian Ray

    2010-03-01

    The blades of a modern wind turbine are critical components central to capturing and transmitting most of the load experienced by the system. They are complex structural items composed of many layers of fiber and resin composite material and typically, one or more shear webs. Large turbine blades being developed today are beyond the point of effective trial-and-error design of the past and design for reliability is always extremely important. Section analysis tools are used to reduce the three-dimensional continuum blade structure to a simpler beam representation for use in system response calculations to support full system design and certification. One model simplification approach is to analyze the two-dimensional blade cross sections to determine the properties for the beam. Another technique is to determine beam properties using static deflections of a full three-dimensional finite element model of a blade. This paper provides insight into discrepancies observed in outputs from each approach. Simple two-dimensional geometries and three-dimensional blade models are analyzed in this investigation. Finally, a subset of computational and experimental section properties for a full turbine blade are compared.

  20. 77 FR 69925 - Assessment of Hazardous Materials Incident Data Collection, Analysis, Reporting, and Use

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-21

    ... for an assessment to improve the collection, analysis, reporting, and use of data related to accidents... to accidents and incidents involving the transportation of hazardous materials. Section 33006(b... improving the collection, analysis, reporting, and use of data related to accidents and incidents...

  1. Multispectral Digital Image Analysis of Varved Sediments in Thin Sections

    NASA Astrophysics Data System (ADS)

    Jäger, K.; Rein, B.; Dietrich, S.

    2006-12-01

    An update of the recently developed method COMPONENTS (Rein, 2003, Rein & Jäger, subm.) for the discrimination of sediment components in thin sections is presented here. COMPONENTS uses a 6-band (multispectral) image analysis. To derive six-band spectral information of the sediments, thin sections are scanned with a digital camera mounted on a polarizing microscope. The thin sections are scanned twice, under polarized and under unpolarized plain light. During each run RGB images are acquired which are subsequently stacked to a six-band file. The first three bands (Blue=1, Green=2, Red=3) result from the spectral behaviour in the blue, green and red band with unpolarized light conditions, and the bands 4 to 6 (Blue=4, Green=5, Red=6) from the polarized light run. The next step is the discrimination of the sediment components by their transmission behaviour. Automatic classification algorithms broadly used in remote sensing applications cannot be used due to unavoidable variations of sediment particle or thin section thicknesses that change absolute grey values of the sediment components. Thus, we use an approach based on band ratios, also known as indices. By using band ratios, the grey values measured in different bands are normalized against each other and illumination variations (e.g. thickness variations) are eliminated. By combining specific ratios we are able to detect all seven major components in the investigated sediments (carbonates, diatoms, fine clastic material, plant rests, pyrite, quartz and resin). Then, the classification results (compositional maps) are validated. Although the automatic classification and the analogous classification show high concordances, some systematic errors could be identified. For example, the transition zone between the sediment and resin filled cracks is classified as fine clastic material and very coarse carbonates are partly classified as quartz because coarse carbonates can be very bright and spectra are partly

  2. Underreporting of maritime accidents to vessel accident databases.

    PubMed

    Hassel, Martin; Asbjørnslett, Bjørn Egil; Hole, Lars Petter

    2011-11-01

    Underreporting of maritime accidents is a problem not only for authorities trying to improve maritime safety through legislation, but also to risk management companies and other entities using maritime casualty statistics in risk and accident analysis. This study collected and compared casualty data from 01.01.2005 to 31.12.2009, from IHS Fairplay and the maritime authorities from a set of nations. The data was compared to find common records, and estimation of the true number of occurred accidents was performed using conditional probability given positive dependency between data sources, several variations of the capture-recapture method, calculation of best case scenario assuming perfect reporting, and scaling up a subset of casualty information from a marine insurance statistics database. The estimated upper limit reporting performance for the selected flag states ranged from 14% to 74%, while the corresponding estimated coverage of IHS Fairplay ranges from 4% to 62%. On average the study results document that the number of unreported accidents makes up roughly 50% of all occurred accidents. Even in a best case scenario, only a few flag states come close to perfect reporting (94%). The considerable scope of underreporting uncovered in the study, indicates that users of statistical vessel accident data should assume a certain degree of underreporting, and adjust their analyses accordingly. Whether to use correction factors, a safety margin, or rely on expert judgment, should be decided on a case by case basis.

  3. Test Data for USEPR Severe Accident Code Validation

    SciTech Connect

    J. L. Rempe

    2007-05-01

    This document identifies data that can be used for assessing various models embodied in severe accident analysis codes. Phenomena considered in this document, which were limited to those anticipated to be of interest in assessing severe accidents in the USEPR developed by AREVA, include: • Fuel Heatup and Melt Progression • Reactor Coolant System (RCS) Thermal Hydraulics • In-Vessel Molten Pool Formation and Heat Transfer • Fuel/Coolant Interactions during Relocation • Debris Heat Loads to the Vessel • Vessel Failure • Molten Core Concrete Interaction (MCCI) and Reactor Cavity Plug Failure • Melt Spreading and Coolability • Hydrogen Control Each section of this report discusses one phenomenon of interest to the USEPR. Within each section, an effort is made to describe the phenomenon and identify what data are available modeling it. As noted in this document, models in US accident analysis codes (MAAP, MELCOR, and SCDAP/RELAP5) differ. Where possible, this report identifies previous assessments that illustrate the impact of modeling differences on predicting various phenomena. Finally, recommendations regarding the status of data available for modeling USEPR severe accident phenomena are summarized.

  4. Calculation reliability in vehicle accident reconstruction.

    PubMed

    Wach, Wojciech

    2016-06-01

    The reconstruction of vehicle accidents is subject to assessment in terms of the reliability of a specific system of engineering and technical operations. In the article [26] a formalized concept of the reliability of vehicle accident reconstruction, defined using Bayesian networks, was proposed. The current article is focused on the calculation reliability since that is the most objective section of this model. It is shown that calculation reliability in accident reconstruction is not another form of calculation uncertainty. The calculation reliability is made dependent on modeling reliability, adequacy of the model and relative uncertainty of calculation. All the terms are defined. An example is presented concerning the analytical determination of the collision location of two vehicles on the road in the absence of evidential traces. It has been proved that the reliability of this kind of calculations generally does not exceed 0.65, despite the fact that the calculation uncertainty itself can reach only 0.05. In this example special attention is paid to the analysis of modeling reliability and calculation uncertainty using sensitivity coefficients and weighted relative uncertainty.

  5. 49 CFR 840.3 - Notification of railroad accidents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Notification of railroad accidents. 840.3 Section... SAFETY BOARD RULES PERTAINING TO NOTIFICATION OF RAILROAD ACCIDENTS § 840.3 Notification of railroad accidents. The operator of a railroad shall notify the Board by telephoning the National Response Center...

  6. 49 CFR 840.3 - Notification of railroad accidents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Notification of railroad accidents. 840.3 Section... SAFETY BOARD RULES PERTAINING TO NOTIFICATION OF RAILROAD ACCIDENTS § 840.3 Notification of railroad accidents. The operator of a railroad shall notify the Board by telephoning the National Response Center...

  7. 43 CFR 15.13 - Report of accidents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false Report of accidents. 15.13 Section 15.13 Public Lands: Interior Office of the Secretary of the Interior KEY LARGO CORAL REEF PRESERVE § 15.13 Report of accidents. Accidents involving injury to life or property shall be reported as soon as...

  8. 43 CFR 15.13 - Report of accidents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Report of accidents. 15.13 Section 15.13 Public Lands: Interior Office of the Secretary of the Interior KEY LARGO CORAL REEF PRESERVE § 15.13 Report of accidents. Accidents involving injury to life or property shall be reported as soon as...

  9. 43 CFR 15.13 - Report of accidents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false Report of accidents. 15.13 Section 15.13 Public Lands: Interior Office of the Secretary of the Interior KEY LARGO CORAL REEF PRESERVE § 15.13 Report of accidents. Accidents involving injury to life or property shall be reported as soon as...

  10. 43 CFR 15.13 - Report of accidents.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Report of accidents. 15.13 Section 15.13 Public Lands: Interior Office of the Secretary of the Interior KEY LARGO CORAL REEF PRESERVE § 15.13 Report of accidents. Accidents involving injury to life or property shall be reported as soon as...

  11. 46 CFR 4.03-1 - Marine casualty or accident.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Marine casualty or accident. 4.03-1 Section 4.03-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC MARINE CASUALTIES AND INVESTIGATIONS Definitions § 4.03-1 Marine casualty or accident. Marine casualty or accident...

  12. 46 CFR 4.03-1 - Marine casualty or accident.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Marine casualty or accident. 4.03-1 Section 4.03-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC MARINE CASUALTIES AND INVESTIGATIONS Definitions § 4.03-1 Marine casualty or accident. Marine casualty or accident...

  13. 46 CFR 4.03-1 - Marine casualty or accident.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 1 2013-10-01 2013-10-01 false Marine casualty or accident. 4.03-1 Section 4.03-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC MARINE CASUALTIES AND INVESTIGATIONS Definitions § 4.03-1 Marine casualty or accident. Marine casualty or accident...

  14. 46 CFR 4.03-1 - Marine casualty or accident.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Marine casualty or accident. 4.03-1 Section 4.03-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC MARINE CASUALTIES AND INVESTIGATIONS Definitions § 4.03-1 Marine casualty or accident. Marine casualty or accident...

  15. 46 CFR 4.03-1 - Marine casualty or accident.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Marine casualty or accident. 4.03-1 Section 4.03-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC MARINE CASUALTIES AND INVESTIGATIONS Definitions § 4.03-1 Marine casualty or accident. Marine casualty or accident...

  16. 49 CFR 199.221 - Use following an accident.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Use following an accident. 199.221 Section 199.221... Prevention Program § 199.221 Use following an accident. Each operator shall prohibit a covered employee who has actual knowledge of an accident in which his or her performance of covered functions has not...

  17. 49 CFR 225.11 - Reporting of accidents/incidents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Reporting of accidents/incidents. 225.11 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD ACCIDENTS/INCIDENTS: REPORTS CLASSIFICATION, AND INVESTIGATIONS § 225.11 Reporting of accidents/incidents. Each railroad subject to this part shall submit to...

  18. 32 CFR 636.12 - Traffic accident investigation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 4 2012-07-01 2011-07-01 true Traffic accident investigation. 636.12 Section... Stewart, Georgia § 636.12 Traffic accident investigation. In addition to the requirements in § 634.28 of... reportable motor vehicle accidents involving government owned or privately owned vehicles....

  19. 49 CFR 840.3 - Notification of railroad accidents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Notification of railroad accidents. 840.3 Section... SAFETY BOARD RULES PERTAINING TO NOTIFICATION OF RAILROAD ACCIDENTS § 840.3 Notification of railroad accidents. The operator of a railroad shall notify the Board by telephoning the National Response Center...

  20. 46 CFR 126.110 - Inspection after accident.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Inspection after accident. 126.110 Section 126.110... CERTIFICATION General § 126.110 Inspection after accident. (a) The owner or operator of an OSV shall make the vessel available for inspection by a marine inspector— (1) Each time an accident occurs, or a defect...

  1. 49 CFR 225.11 - Reporting of accidents/incidents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Reporting of accidents/incidents. 225.11 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD ACCIDENTS/INCIDENTS: REPORTS CLASSIFICATION, AND INVESTIGATIONS § 225.11 Reporting of accidents/incidents. (a) Each railroad subject to this part shall submit...

  2. 49 CFR 840.3 - Notification of railroad accidents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Notification of railroad accidents. 840.3 Section... SAFETY BOARD RULES PERTAINING TO NOTIFICATION OF RAILROAD ACCIDENTS § 840.3 Notification of railroad accidents. The operator of a railroad shall notify the Board by telephoning the National Response Center...

  3. 32 CFR 636.12 - Traffic accident investigation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 4 2011-07-01 2011-07-01 false Traffic accident investigation. 636.12 Section... Stewart, Georgia § 636.12 Traffic accident investigation. In addition to the requirements in § 634.28 of... reportable motor vehicle accidents involving government owned or privately owned vehicles....

  4. 32 CFR 636.12 - Traffic accident investigation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 4 2013-07-01 2013-07-01 false Traffic accident investigation. 636.12 Section... Stewart, Georgia § 636.12 Traffic accident investigation. In addition to the requirements in § 634.28 of... reportable motor vehicle accidents involving government owned or privately owned vehicles....

  5. 49 CFR 382.303 - Post-accident testing.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 5 2014-10-01 2014-10-01 false Post-accident testing. 382.303 Section 382.303... ALCOHOL USE AND TESTING Tests Required § 382.303 Post-accident testing. (a) As soon as practicable... functions with respect to the vehicle, if the accident involved the loss of human life; or (2) Who...

  6. 49 CFR 655.34 - Use following an accident.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Use following an accident. 655.34 Section 655.34... Prohibited Alcohol Use § 655.34 Use following an accident. Each employer shall prohibit alcohol use by any covered employee required to take a post-accident alcohol test under § 655.44 for eight hours...

  7. 49 CFR 199.221 - Use following an accident.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Use following an accident. 199.221 Section 199.221... Prevention Program § 199.221 Use following an accident. Each operator shall prohibit a covered employee who has actual knowledge of an accident in which his or her performance of covered functions has not...

  8. 49 CFR 178.345-8 - Accident damage protection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Accident damage protection. 178.345-8 Section 178... Specifications for Containers for Motor Vehicle Transportation § 178.345-8 Accident damage protection. (a... of lading due to an accident. (1) Any dome, sump, or washout cover plate projecting from the...

  9. 48 CFR 52.236-13 - Accident Prevention.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 2 2013-10-01 2013-10-01 false Accident Prevention. 52.236-13 Section 52.236-13 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION....236-13 Accident Prevention. As prescribed in 36.513, insert the following clause: Accident...

  10. 49 CFR 655.34 - Use following an accident.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Use following an accident. 655.34 Section 655.34... Prohibited Alcohol Use § 655.34 Use following an accident. Each employer shall prohibit alcohol use by any covered employee required to take a post-accident alcohol test under § 655.44 for eight hours...

  11. 46 CFR 78.33-5 - Accidents to machinery.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Accidents to machinery. 78.33-5 Section 78.33-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Reports of Accidents, Repairs, and Unsafe Equipment § 78.33-5 Accidents to machinery. (a) In the event of an...

  12. 46 CFR 78.33-5 - Accidents to machinery.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 3 2014-10-01 2014-10-01 false Accidents to machinery. 78.33-5 Section 78.33-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Reports of Accidents, Repairs, and Unsafe Equipment § 78.33-5 Accidents to machinery. (a) In the event of an...

  13. 25 CFR 226.41 - Accidents to be reported.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Accidents to be reported. 226.41 Section 226.41 Indians... LANDS FOR OIL AND GAS MINING Requirements of Lessees § 226.41 Accidents to be reported. Lessee shall make a complete report to the Superintendent of all accidents, fires, or acts of theft and...

  14. 36 CFR 4.4 - Report of motor vehicle accident.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... accident. 4.4 Section 4.4 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR VEHICLES AND TRAFFIC SAFETY § 4.4 Report of motor vehicle accident. (a) The operator of a motor vehicle involved in an accident resulting in property damage, personal injury or death shall report...

  15. 49 CFR 178.337-10 - Accident damage protection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Accident damage protection. 178.337-10 Section 178... PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.337-10 Accident damage... stop valve and within the accident damage protection to prevent any accidental loss of lading....

  16. 10 CFR 50.67 - Accident source term.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Accident source term. 50.67 Section 50.67 Energy NUCLEAR... Conditions of Licenses and Construction Permits § 50.67 Accident source term. (a) Applicability. The... to January 10, 1997, who seek to revise the current accident source term used in their design...

  17. 49 CFR 655.34 - Use following an accident.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Use following an accident. 655.34 Section 655.34... Prohibited Alcohol Use § 655.34 Use following an accident. Each employer shall prohibit alcohol use by any covered employee required to take a post-accident alcohol test under § 655.44 for eight hours...

  18. 10 CFR 50.67 - Accident source term.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Accident source term. 50.67 Section 50.67 Energy NUCLEAR... Conditions of Licenses and Construction Permits § 50.67 Accident source term. (a) Applicability. The... to January 10, 1997, who seek to revise the current accident source term used in their design...

  19. 49 CFR 199.221 - Use following an accident.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Use following an accident. 199.221 Section 199.221... Prevention Program § 199.221 Use following an accident. Each operator shall prohibit a covered employee who has actual knowledge of an accident in which his or her performance of covered functions has not...

  20. 49 CFR 199.221 - Use following an accident.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Use following an accident. 199.221 Section 199.221... Prevention Program § 199.221 Use following an accident. Each operator shall prohibit a covered employee who has actual knowledge of an accident in which his or her performance of covered functions has not...