Science.gov

Sample records for accident resistant containers

  1. Accident resistant transport container

    DOEpatents

    Andersen, John A.; Cole, James K.

    1980-01-01

    The invention relates to a container for the safe air transport of plutonium having several intermediate wood layers and a load spreader intermediate an inner container and an outer shell for mitigation of shock during a hypothetical accident.

  2. Accident resistant transport container

    DOEpatents

    Anderson, J.A.; Cole, K.K.

    The invention relates to a container for the safe air transport of plutonium having several intermediate wood layers and a load spreader intermediate an inner container and an outer shell for mitigation of shock during a hypothetical accident.

  3. Piercing tool, Transportation Accident Resistant Container (TARC)

    SciTech Connect

    Lari, P.

    1994-08-01

    Transportation Accident Resistant Containers (TARC)s are used for enhanced safety during movement of nuclear weapons. Its design features a tough stainless steel outer skin, redwood for impact mitigation and fire protection and a rugged aluminum inner container. Redwood absorbs impact energy by crushing, similar to the way foam crushes in other containers. Redwood also functions to insulate the weapon from heat and fire. When a TARC is involved in a fire, the redwood will slowly burn forming a good insulating char. The redwood can continue to smolder once the fire is out. To ensure the smolder is extinguished, water can be directed into any accident caused hole in the skin. If no hole exists, it may be necessary to create one. This document discusses tool selection, testing, and a simple but effective method of creating an access hole in the outer skin large enough to apply fire fighting techniques.

  4. Report on audit of the Department of Energy`s Transportation Accident Resistant Container Program

    SciTech Connect

    1995-10-11

    The U.S. Department of Energy (Department) has ultimate responsibility for the safety of all nuclear explosives and weapons operations conducted by the Department and its contractors. The Department also has joint responsibility for the safety of nuclear weapons in the custody of the Armed Services. Since the 1970s, the Department has designed, developed, and produced accident resistant containers to promote safety when transporting certain types of nuclear weapons by air. After successfully developing and modifying accident resistant containers for use on Army helicopters, the Department subsequently designed, modified, and produced similar containers for the United States Air Force. Because the Department spent millions of dollars on this project, we conducted the audit to determine if the Department had adequate controls in place to preclude the development and production of projects which did not have customer agreement or meet customer requirements. One goal of the Department`s Strategic Plan is to ensure that customer expectations are met by having them participate in the planning process. Although nuclear safety responsibility was shared with the Department of Defense, the Department designed and produced 87 accident resistant containers for about $29 million when the customer did not want them and expressed no desire to use these containers. This occurred because the Department unilaterally decided to produce containers without ensuring that the containers met customer expectations. There may be circumstances where the Department will do some preliminary design and testing before agreeing with the Department of Defense on requirements. However, the Departments of Energy and Defense should reach agreement on the requirement for products before final design and production, otherwise funds will be spent unnecessarily.

  5. Crash resistant container

    DOEpatents

    Pierce, J.D.

    1994-08-16

    A container for hazardous materials capable of protecting the enclosed materials from high speed impact is disclosed. Energy absorption is provided by a multiplicity of crushable layers of either wire mesh or perforated metal sheets which thin and flow together under impact loading. Layers of a higher tensile strength material are interspersed within the crushable layers to confine them and increase performance. 1 fig.

  6. Crash resistant container

    DOEpatents

    Pierce, Jim D.

    1994-01-01

    A container for hazardous materials capable of protecting the enclosed materials from high speed impact. Energy absorption is provided by a multiplicity of crushable layers of either wire mesh or perforated metal sheets which thin and flow together under impact loading. Layers of a higher tensile strength material are interspersed within the crushable layers to confine them and increase performance.

  7. Containment performance for the core melt accidents in BWRs with Mark I and Mark II containments

    SciTech Connect

    Perkins, K.R.; Yang, J.W.; Greene, G.A.; Pratt, W.T.; Hofmayer, C.

    1985-01-01

    Most previous risk assessment studies have assumed catastrophic failure of containments for severe accidents which are predicted to exceed the containment yield stress. This investigation analyzes the progression of a severe accident in order to develop realistic containment temperature and pressure loading, utilizes models for containment leakage estimates for the various loading histories, and assesses the expected failure modes and timing of releases for core melt accidents in Boiling Water Reactors (BWRs) with Mark I and Mark II containments. The results of the investigation indicate that leakage through the seal on the drywell head may be sufficient to prevent catastrophic failure of the containments for a wide range of hypothetical core melt scenarios. In addition, the investigation has indicated the potential for a previously inidentified failure mode (containment liner meltthrough) for Mark I containments in which a large fraction of the core is released from the vessel in a molten state. 14 refs.

  8. Shipping container response to severe highway and railway accident conditions: Appendices

    SciTech Connect

    Fischer, L.E.; Chou, C.K.; Gerhard, M.A.; Kimura, C.Y.; Martin, R.W.; Mensing, R.W.; Mount, M.E.; Witte, M.C.

    1987-02-01

    Volume 2 contains the following appendices: Severe accident data; truck accident data; railroad accident data; highway survey data and bridge column properties; structural analysis; thermal analysis; probability estimation techniques; and benchmarking for computer codes used in impact analysis. (LN)

  9. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    .... For information regarding the types of documents routinely issued by the Board, see 49 CFR part 801... public accident investigation dockets, and accident database data. 837.3 Section 837.3 Transportation... investigation dockets, and accident database data. (a) Demands for material contained in the NTSB's...

  10. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    .... For information regarding the types of documents routinely issued by the Board, see 49 CFR part 801... public accident investigation dockets, and accident database data. 837.3 Section 837.3 Transportation... investigation dockets, and accident database data. (a) Demands for material contained in the NTSB's...

  11. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    .... For information regarding the types of documents routinely issued by the Board, see 49 CFR part 801... public accident investigation dockets, and accident database data. 837.3 Section 837.3 Transportation... investigation dockets, and accident database data. (a) Demands for material contained in the NTSB's...

  12. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    .... For information regarding the types of documents routinely issued by the Board, see 49 CFR part 801... public accident investigation dockets, and accident database data. 837.3 Section 837.3 Transportation... investigation dockets, and accident database data. (a) Demands for material contained in the NTSB's...

  13. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    .... For information regarding the types of documents routinely issued by the Board, see 49 CFR part 801... public accident investigation dockets, and accident database data. 837.3 Section 837.3 Transportation... investigation dockets, and accident database data. (a) Demands for material contained in the NTSB's...

  14. Shipping container response to three severe railway accident scenarios

    SciTech Connect

    Mok, G.C.; Fischer, L.E.; Murty, S.S.; Witte, M.C.

    1998-04-01

    The probability of damage and the potential resulting hazards are analyzed for a representative rail shipping container for three severe rail accident scenarios. The scenarios are: (1) the rupture of closure bolts and resulting opening of closure lid due to a severe impact, (2) the puncture of container by an impacting rail-car coupler, and (3) the yielding of container due to side impact on a rigid uneven surface. The analysis results indicate that scenario 2 is a physically unreasonable event while the probabilities of a significant loss of containment in scenarios 1 and 3 are extremely small. Before assessing the potential risk for the last two scenarios, the uncertainties in predicting complex phenomena for rare, high- consequence hazards needs to be addressed using a rigorous methodology.

  15. Containment performance of prototypical reactor containments subjected to severe accident conditions

    SciTech Connect

    Klamerus, E.W.; Bohn, M.P.; Wesley, D.A.; Krishnaswamy, C.N.

    1996-12-01

    In SECY-90-016, the NTRC proposed a safety goal of a conditional containment failure probability (CCFP) of 0.1 and the alternative acceptance criteria allowed for steel containments, which specifies that the stresses should not exceed ASNE Level C allowables for severe accident pressures and temperatures. In this work, the need for an equivalent criterion for concrete containments was studied. Six surrogate containments were designed and analyzed in order to compare the margins between design pressure, pressure resulting in exceedance of Level C (or yield) stress limits, and ultimate pressure. For comparability, each containment has an identical internal volume and design pressure. Results from the analysis showed margins to yield are comparable and display a similar margin for both steel and concrete containments. In addition, the margin to failure, although slightly higher in the steel containments, were also comparable. Finally, a CCFP for code design was determined based on general membrane behavior and imposing an upper bound severe accident curve developed in the DCH studies. The resulting CCFP`s were less then 0.02 (or 2%) for all the surrogate containments studied, showing that these containment designs all achieved the NRC safety goal.

  16. Instrumentation availability during severe accidents for a boiling water reactor with a Mark I containment

    SciTech Connect

    Arcieri, W.C.; Hanson, D.J. )

    1992-02-01

    In support of the US Nuclear Regulatory Commission Accident Management Research Program, the availability of instruments to supply accident management information during a broad range of severe accidents is evaluated for a Boiling Water Reactor with a Mark I containment. Results from this evaluation include: (1) the identification of plant conditions that would impact instrument performance and information needs during severe accidents; (2) the definition of envelopes of parameters that would be important in assessing the performance of plant instrumentation for a broad range of severe accident sequences; and (3) assessment of the availability of plant instrumentation during severe accidents.

  17. Corrosion resistant storage container for radioactive material

    DOEpatents

    Schweitzer, D.G.; Davis, M.S.

    1984-08-30

    A corrosion resistant long-term storage container for isolating high-level radioactive waste material in a repository is claimed. The container is formed of a plurality of sealed corrosion resistant canisters of different relative sizes, with the smaller canisters housed within the larger canisters, and with spacer means disposed between juxtaposed pairs of canisters to maintain a predetermined spacing between each of the canisters. The combination of the plural surfaces of the canisters and the associated spacer means is effective to make the container capable of resisting corrosion, and thereby of preventing waste material from leaking from the innermost canister into the ambient atmosphere.

  18. Corrosion resistant storage container for radioactive material

    DOEpatents

    Schweitzer, Donald G.; Davis, Mary S.

    1990-01-01

    A corrosion resistant long-term storage container for isolating radioactive waste material in a repository. The container is formed of a plurality of sealed corrosion resistant canisters of different relative sizes, with the smaller canisters housed within the larger canisters, and with spacer means disposed between judxtaposed pairs of canisters to maintain a predetermined spacing between each of the canisters. The combination of the plural surfaces of the canisters and the associated spacer means is effective to make the container capable of resisting corrosion, and thereby of preventing waste material from leaking from the innermost canister into the ambient atmosphere.

  19. Fire-Resistant Polyimides Containing Phosphorus

    NASA Technical Reports Server (NTRS)

    Mikroyannidis, J.

    1986-01-01

    Limiting oxygen index increased. Copolyimide with a group containing phosphorus synthesized from 1-2,4-diaminobenzene, m-phenylenediamine, and tetracarboxylic dianhydride. Copolymer more fire resistant than corresponding polyimide without phosphorus.

  20. Determination of optimal LWR containment design, excluding accidents more severe than Class 8

    SciTech Connect

    Cave, L.; Min, T.K.

    1980-04-01

    Information is presented concerning the restrictive effect of existing NRC requirements; definition of possible targets for containment; possible containment systems for LWR; optimization of containment design for class 3 through class 8 accidents (PWR); estimated costs of some possible containment arrangements for PWR relative to the standard dry containment system; estimated costs of BWR containment.

  1. Containment building atmosphere response during severe accidents in high temperature gas-cooled reactors

    SciTech Connect

    Kroeger, P.G.; Chan, B.C.

    1985-01-01

    Several safety evaluations for large High Temperature Gas Cooled Reactors (HTGR), using a Prestressed Concrete Reactor Vessel (PCRV) design, have concluded that Unrestricted Core Heatup Accidents (UCHA) present the most important severe accidents, resulting in the dominant source term. While the core thermohydraulic transients for such accident sequences have been presented previously, the subject of this paper is the containment building (CB) atmosphere transient, with primary emphasis on the CB atmosphere temperature and pressure, as overpressurization is the most likely failure mode.

  2. Fire-Resistant Polyamides Containing Phosphorus

    NASA Technical Reports Server (NTRS)

    Kourtides, Demetrius A.; Mikroyannidis, John A.

    1988-01-01

    Flammability and weight loss reduced. Fire-resistant polymers obtained from 1-{(dialkoxyphosphonyl) methyl}-2, 4- and -2, 6-diaminobenzenes by reaction with acyl or diacyl halides of higher functionality. Incorporation of compounds containing phosphorus into certain polymers shown previously to increase fire retardance. Discovery adds new class of polyamides to group of such polymers.

  3. Dehydration resistance of liposomes containing trehalose glycolipids

    NASA Astrophysics Data System (ADS)

    Nyberg, Kendra; Goulding, Morgan; Parthasarathy, Raghuveer

    2010-03-01

    The pathogen, Mycobacterium tuberculosis, has an unusual outer membrane containing trehalose glycolipids that may contribute to its ability to survive freezing and dehydration. Based on our recent discovery that trehalose glycolipids confer dehydration resistance to supported lipid monolayers (Biophys. J. 94: 4718-4724 (2008); Langmuir 25: 5193-5198, (2009)), we hypothesized that liposomes containing synthetic trehalose glycolipids may be dehydration-resistant as well. To test this, we measured the leakage of encapsulated fluorophores and larger macromolecular cargo from such liposomes subject to freeze drying. Both leakage assays and size measurements show that the liposomes are dehydration-resistant. In addition to demonstrating a possibly technologically useful encapsulation platform, our results corroborate the view that encapsulation in a trehalose-glycolipid-rich membrane is a biophysically viable route to protection of mycobacteria from environmental stresses.

  4. Simulation of impact of the Generic Accident-Resistant Packaging (GAP)

    SciTech Connect

    Slavin, A.M.

    1994-10-01

    Finite element simulations modelling impact of the Generic Accident-Resistant Packaging (GAP) have been performed. The GAP is a nuclear weapon shipping container that will be used by accident response groups from both the United States and the United Kingdom. The package is a thin-walled steel structure filled with rigid polyurethane foam and weighs approximately 5100 lbs when loaded. The simulations examined 250 ft/s impacts onto a rigid target at several orientations. The development of the finite element model included studies of modelling assumptions and material parameters. Upon completion of the simulation series, three full-scale impact tests were performed. A comparison of the simulation results to the test data is given. Differences between the results and data are examined, and possible explanations for the differences are discussed.

  5. Estimates of early containment loads from core melt accidents. Draft report for comment

    SciTech Connect

    1985-12-01

    The thermal-hydraulic processes and corium debris-material interactions that can result from core melting in a severe accident have been studied to evaluate the potential effect of such phenomena on containment integrity. Pressure and temperature loads associated with representative accident sequences have been estimated for the six various LWR containment types used within the United States. Summaries distilling the analyses are presented and an interpretation of the results provided. 13 refs., 68 figs., 39 tabs.

  6. Study of light water reactor containments under important severe accident conditions

    SciTech Connect

    Hofmayer, C.H.; Pratt, W.T.; Bagchi, G.; Noonan, V.S.

    1985-01-01

    The US Nuclear Regulatory Commission has sponsored studies to develop a ''LEAKAGE-BEFORE-FAILURE'' model for use in severe accident risk assessments to provide a means of accounting for significant containment leakage prior to reaching the containment threshold pressure. Six containment types have been studied (large dry, subatmospheric, ice condenser, Mark I, II, and III). Potential leak paths through major containment penetration assemblies were investigated and upper-bound estimates of leak areas established. These leak areas may result from increasing internal pressure and degradation of nonmetallic seal materials due to severe accident conditions. This paper describes the approach and summarizes the results and conclusions of this study.

  7. Insights into the behavior of nuclear power plant containments during severe accidents

    SciTech Connect

    Horschel, D.S.; Ludwigsen, J.S.; Parks, M.B.; Lambert, L.D.; Dameron, R.A.; Rashid, Y.R.

    1993-06-01

    The containment building surrounding a nuclear reactor offers the last barrier to the release of radioactive materials from a severe accident into the environment. The loading environment of the containment under severe accident conditions may include much greater than design pressures and temperatures. Investigations into the performance of containments subject to ultimate or failure pressure and temperature conditions have been performed over the last several years through a program administered by the Nuclear Regulatory Commission (NRC). These NRC sponsored investigations are subsequently discussed. Reviewed are the results of large scale experiments on reinforced concrete, prestressed concrete, and steel containment models pressurized to failure. In conjunction with these major tests, the results of separate effect testing on many of the critical containment components; that is, aged and unaged seals, a personnel air lock and electrical penetration assemblies subjected to elevated temperature and pressure have been performed. An objective of the NRC program is to gain an understanding of the behavior of typical existing and planned containment designs subject to postulated severe accident conditions. This understanding has led to the development of experimentally verified analytical tools that can be applied to accurately predict their ultimate capacities useful in developing severe accident mitigation schemes. Finally, speculation on the response of containments subjected to severe accident conditions is presented.

  8. Evaluation of an accident with air ingress into tritium storage hydride container

    SciTech Connect

    Perevezentsev, A.N.; Melyantsev, A.N.; Penzhorn, R.D.

    1994-12-31

    Using differential thermal and thermogravimetric analysis the rates of reactions of ZrCo with oxygen, nitrogen and air were investigated as functions of temperature. Obtained rate constants, activation energies and kinetic equations allow to estimate the reaction fraction as functions of temperature and reaction time. Obtained data as well as results of investigation of pyrophoricity of several tritium storage materials were used for evaluation of accidents with air ingress into primary container of tritium storage hydride container. The scenarios of accident with air ingress into getter bed are considered in dependence from initial conditions of an accident such as temperature of getter material, and void volume of primary container. The numerical modeling of an accident with air ingress into hydride container is carried out for cases of air freely incoming into getter bed and of air passing through getter packed bed. The computer modeling takes into account the particularities of design of tritium storage hydride container. The comparison of results of accidents for different tritium storage materials, such as ZrCo, LaNi{sub 3}Mn{sub 2} and uranium, and several designs of primary container are presented.

  9. Analysis of concrete containment structures under severe accident loading conditions

    SciTech Connect

    Porter, V.L.

    1993-12-31

    One of the areas of current interest in the nuclear power industry is the response of containment buildings to internal pressures that may exceed design pressure levels. Evaluating the response of structures under these conditions requires computing beyond design load to the ultimate load of the containment. For concrete containments, this requirement means computing through severe concrete cracking and into the regime of wide-spread plastic rebar and/or tendon response. In this regime of material response, an implicit code can have trouble converging. This paper describes some of the author`s experiences with Version 5.2 of ABAQUS Standard and the ABAQUS concrete model in computing the axisymmetric response of a prestressed concrete containment to ultimate global structural failure under high internal pressures. The effects of varying the tension stiffening parameter in the concrete material model and variations of the parameters for the CONTROLS option are discussed.

  10. Radioactive material release from a containment vessel during a fire accident

    SciTech Connect

    Hensel, S.; Norkus, J.

    2015-02-26

    A methodology is presented to determine the source term for leaks and ruptures of pressurized vessels. The generic methodology is applied to a 9975 Primary Containment Vessel (PCV) which losses containment due to a hypothesized fire accident. The release due to a vessel rupture is approximately two orders of magnitude greater than the release due to a leak.

  11. PRESSURE INTEGRITY OF 3013 CONTAINER UNDER POSTULATED ACCIDENT CONDITIONS

    SciTech Connect

    Rawls, G.

    2010-02-01

    A series of tests was carried out to determine the threshold for deflagration-to-detonation transition (DDT), structural loading, and structural response of the Department of Energy 3013 storage systems for the case of an accidental explosion of evolved gas within the storage containers. Three experimental fixtures were used to examine the various issues and three mixtures consisting of either stoichiometric hydrogen-oxygen, stoichiometric hydrogen-oxygen with added nitrogen, or stoichiometric hydrogen-oxygen with an added nitrogen-helium mixture were tested. Tests were carried out as a function of initial pressure from 1 to 3.5 bar and initial temperature from room temperature to 150 C. The elevated temperature tests resulted in a slight increase in the threshold pressure for DDT. The elevated temperature tests were performed to ensure the test results were bounding. Because the change was not significant the elevated temperature data are not presented in the paper. The explosions were initiated with either a small spark or a hot surface. Based on the results of these tests under the conditions investigated, it can be concluded that DDT of a stoichiometric hydrogen-oxygen mixture (and mixtures diluted with nitrogen and helium) within the 3013 containment system does not pose a threat to the structural integrity of the outer container.

  12. Estimate of radionuclide release characteristics into containment under severe accident conditions. Final report

    SciTech Connect

    Nourbakhsh, H.P.

    1993-11-01

    A detailed review of the available light water reactor source term information is presented as a technical basis for development of updated source terms into the containment under severe accident conditions. Simplified estimates of radionuclide release and transport characteristics are specified for each unique combination of the reactor coolant and containment system combinations. A quantitative uncertainty analysis in the release to the containment using NUREG-1150 methodology is also presented.

  13. Potential for containment leak paths through electrical penetration assemblies under severe accident conditions. [PWR; BWR

    SciTech Connect

    Sebrell, W.

    1983-07-01

    The leakage behavior of containments beyond design conditions and knowledge of failure modes is required for evaluation of mitigation strategies for severe accidents, risk studies, emergency preparedness planning, and siting. These studies are directed towards assessing the risk and consequences of severe accidents. An accident sequence analysis conducted on a Boiling Water Reactor (BWR), Mark I (MK I), indicated very high temperatures in the dry-well region, which is the location of the majority of electrical penetration assemblies. Because of the high temperatures, it was postulated in the ORNL study that the sealants would fail and all the electrical penetration assemblies would leak before structural failure would occur. Since other containments had similar electrical penetration assemblies, it was concluded that all containments would experience the same type of failure. The results of this study, however, show that this conclusion does not hold for PWRs because in the worst accident sequence, the long time containment gases stabilize to 350/sup 0/F. BWRs, on the other hand, do experience high dry-well temperatures and have a higher potential for leakage.

  14. Radionuclide release calculations for selected severe accident scenarios. Volume 3. PWR, subatmospheric containment design

    SciTech Connect

    Denning, R.S.; Gieseke, J.A.; Cybulskis, P.; Lee, K.W.; Jordan, H.; Curtis, L.A.; Kelly, R.F.; Kogan, V.; Schumacher, P.M.

    1986-07-01

    This report presents results of analyses of the enviromental releases of fission products (source terms) for severe accident scenarios in a pressurized water reactor with a subatmospheric containment design. The analyses were performed to support the Severe Accident Risk Reduction/Risk Rebaselining Program (SARRP) which is being undertaken for the US Nuclear Regulatory Commission by Sandia National Laboratories. In the SARRP program, risk estimates are being generated for a number of reference plant designs. the Surry plant has been used in this study as the reference plant for a subatmospheric design.

  15. Assessment of severe accident prevention and mitigation features: BWR (boiling water reactor), Mark I containment design

    SciTech Connect

    Pratt, W.T.; Eltawila, F.; Perkins, K.R.; Fitzpatrick, R.G.; Luckas, W.J.; Lehner, J.R.; Davis, P.

    1988-07-01

    Plant features and operator actions, which have been found to be important in either preventing or mitigating severe accidents in BWRs with Mark I containments (BWR Mark I's) have been identified. These features and actions were developed from insights derived from reviews of in-depth risk assessments performed specifically for the Peach Bottom plant and from assessment of other relevant studies. Accident sequences that dominate the core-damage frequency and those accident sequences that are of potentially high consequence were identified. Vulnerabilities of the BWR Mark I to severe accident containment loads were also identified. In addition, those features of a BWR Mark I, which are important for preventing core damage and are available for mitigating fission-product release to the environment were also identified. This report is issued to provide focus to an analyst examining an individual plant. This report calls attention to plant features and operator actions and provides a list of deterministic attributes for assessing those features and actions found to be helpful in reducing the overall risk for Peach Bottom and other Mark I plants. Thus, the guidance is offered as a resource in examining the subject plant to determine if the same, or similar, plant features and operator actions will be of value in reducing overall plant risk. This report is intended to serve solely as guidance.

  16. Simulation of the radiation fields from ionizing radiation sources inside the containment in an accident

    SciTech Connect

    Kalugin, M. A.

    2010-12-15

    In the present work, a set of codes used for simulations of the radiation fields from ionizing radiation sources inside the containment in an accident is described. A method of evaluating the gamma dose rate from a space and energy distributed source is given. The dose rate is calculated by means of the design point kernel method and using buildup factors. The code MCU-REA with the ORIMCU module is used for the burnup calculations.

  17. Tamper-Resistant Secure Disposal Container

    NASA Technical Reports Server (NTRS)

    Collins, Earl R., Jr.

    1989-01-01

    Closure device for secure waste containers prevents classified papers and other proprietary articles from being withdrawn when container turned on side. Has pendulum that swings comb into closed position when container turned on side. Suspended with axis of rotation perpendicular to axes of combs. Extends through D-shaped cam ring, attached to upper comb with standoff struts. When container tilted sideways, pendulum swings along arc side of D-shaped ring. Forces cam ring aside, moving upper comb toward closed position. If container tilted forward or backward, pendulum does not interfere with comb movement. Spring catches added to combs so if actuated and close container opening, they lock in place to prevent further tampering.

  18. Depressurization as an accident management strategy to minimize the consequences of direct containment heating

    SciTech Connect

    Hanson, D.J.; Golden, D.W.; Chambers, R.; Miller, J.D.; Hallbert, B.P.; Dobbe, C.A. )

    1990-10-01

    Probabilistic Risk Assessments (PRAs) have identified severe accidents for nuclear power plants that have the potential to cause failure of the containment through direct containment heating (DCH). Prevention of DCH or mitigation of its effects may be possible using accident management strategies that intentionally depressurize the reactor coolant system (RCS). The effectiveness of intentional depressurization during a station blackout TMLB' sequence was evaluated considering the phenomenological behavior, hardware performance, and operational performance. Phenomenological behavior was calculated using the SCDAP/RELAP5 severe accident analysis code. Two strategies to mitigate DCH by depressurization of the RCS were considered. One strategy, called early depressurization, assumed that the reactor head vent and pressurizer power-operated relief valves (PORVs) were latched open at steam generator dryout. The second strategy, called late depression, assumed that the head vent and PORVs were latched open at a core exit temperature of {approximately}922 K (1200{degree}F). Depressurization of the RCS to a low value that may mitigate DCH was predicted prior to reactor pressure vessel breach for both early and late depressurization. The strategy of late depressurization is preferred over early depressurization because there are greater opportunities to recover plant functions prior to core damage and because failure uncertainties are lessened. 22 refs., 38 figs., 6 tabs.

  19. Validation of CONTAIN-LMR code for accident analysis of sodium-cooled fast reactor containments

    SciTech Connect

    Gordeev, S.; Hering, W.; Schikorr, M.; Stieglitz, R.

    2012-07-01

    CONTAIN-LMR 1 is an analytical tool for the containment performance of sodium cooled fast reactors. In this code, the modelling for the sodium fire is included: the oxygen diffusion model for the sodium pool fire, and the liquid droplet model for the sodium spray fire. CONTAIN-LMR is also able to model the interaction of liquid sodium with concrete structure. It may be applicable to different concrete compositions. Testing and validation of these models will help to qualify the simulation results. Three experiments with sodium performed in the FAUNA facility at FZK have been used for the validation of CONTAIN-LMR. For pool fire tests, calculations have been performed with two models. The first model consists of one gas cell representing the volume of the burn compartment. The volume of the second model is subdivided into 32 coupled gas cells. The agreement between calculations and experimental data is acceptable. The detailed pool fire model shows less deviation from experiments. In the spray fire, the direct heating from the sodium burning in the media is dominant. Therefore, single cell modeling is enough to describe the phenomena. Calculation results have reasonable agreement with experimental data. Limitations of the implemented spray model can cause the overestimation of predicted pressure and temperature in the cell atmosphere. The ability of the CONTAIN-LMR to simulate the sodium pool fire accompanied by sodium-concrete reactions was tested using the experimental study of sodium-concrete interactions for construction concrete as well as for shielding concrete. The model provides a reasonably good representation of chemical processes during sodium-concrete interaction. The comparison of time-temperature profiles of sodium and concrete shows, that the model requires modifications for predictions of the test results. (authors)

  20. Preliminary Investigation of Candidate Materials for Use in Accident Resistant Fuel

    SciTech Connect

    Jason M. Harp; Paul A. Lessing; Blair H. Park; Jakeob Maupin

    2013-09-01

    As part of a Collaborative Research and Development Agreement (CRADA) with industry, Idaho National Laboratory (INL) is investigating several options for accident resistant uranium compounds including silicides, and nitrides for use in future light water reactor (LWR) fuels. This work is part of a larger effort to create accident tolerant fuel forms where changes to the fuel pellets, cladding, and cladding treatment are considered. The goal fuel form should have a resistance to water corrosion comparable to UO2, have an equal to or larger thermal conductivity than uranium dioxide, a melting temperature that allows the material to stay solid under power reactor conditions, and a uranium loading that maintains or improves current LWR power densities. During the course of this research, fuel fabricated at INL will be characterized, irradiated at the INL Advanced Test Reactor, and examined after irradiation at INL facilities to help inform industrial partners on candidate technologies.

  1. Radioactive particulate release associated with the DOT specification 6M container under hypothetical accident conditions

    SciTech Connect

    Taylor, J.M.; Raney, P.J.

    1986-02-01

    A testing program was conducted to determine the leakage of depleted uranium dioxide powder (DUO) from the inner containment components of the US Department of Transportation's (DOT) specification 6M container under hypothetical accident conditions. Depleted uranium dioxide was selected as a surrogate for plutonium oxide because of the similarities in the powder characteristics, density and particle size, and because of the special handling and special facilities required for plutonium oxide. The DUO was packaged inside food pack cans in three different configurations inside the 2R vessel of the 6M container. The amount of DUO powder leakage ranged from none detectable (<2 x 10/sup -7/ g) to a high of 1 x 10/sup -3/ g. The combination of gravity, vibration and pressure produced the highest leakage of DUO. Containers that had hermetic seals (leak rates <6 x 10/sup -4/ atm cc/min) did not leak any detectable amount (<2 x 10/sup -7/ g) of DUO under the test conditions. Impact forces had no effect on the leakage of particles with the packaging configurations used. 23 refs., 24 figs., 3 tabs.

  2. GASFLOW: A computational model to analyze accidents in nuclear containment and facility buildings

    SciTech Connect

    Travis, J.R. ); Nichols, B.D.; Wilson, T.L.; Lam, K.L.; Spore, J.W.; Niederauer, G.F. )

    1993-01-01

    GASFLOW is a finite-volume computer code that solves the time-dependent, compressible Navier-Stokes equations for multiple gas species. The fluid-dynamics algorithm is coupled to the chemical kinetics of combusting liquids or gases to simulate diffusion or propagating flames in complex geometries of nuclear containment or confinement and facilities' buildings. Fluid turbulence is calculated to enhance the transport and mixing of gases in rooms and volumes that may be connected by a ventilation system. The ventilation system may consist of extensive ductwork, filters, dampers or valves, and fans. Condensation and heat transfer to walls, floors, ceilings, and internal structures are calculated to model the appropriate energy sinks. Solid and liquid aerosol behavior is simulated to give the time and space inventory of radionuclides. The solution procedure of the governing equations is a modified Los Alamos ICE'd-ALE methodology. Complex facilities can be represented by separate computational domains (multiblocks) that communicate through overlapping boundary conditions. The ventilation system is superimposed throughout the multiblock mesh. Gas mixtures and aerosols are transported through the free three-dimensional volumes and the restricted one-dimensional ventilation components as the accident and fluid flow fields evolve. Combustion may occur if sufficient fuel and reactant or oxidizer are present and have an ignition source. Pressure and thermal loads on the building, structural components, and safety-related equipment can be determined for specific accident scenarios. GASFLOW calculations have been compared with large oil-pool fire tests in the 1986 HDR containment test T52.14, which is a 3000-kW fire experiment. The computed results are in good agreement with the observed data.

  3. Environmentally stable chemically amplified positive resist containing vinyllactam terpolymers

    NASA Astrophysics Data System (ADS)

    Bok, Cheol-Kyu; Koh, Cha-Won; Jung, Min-Ho; Baik, Ki-Ho; Kim, Jin-Baek; Cheong, Jong-Ho

    1997-07-01

    In this paper we report here on lithographic performance of high resolution, environmentally stable and aqueous base developable positive tone resist for DUV lithography. There have been a lot of efforts to prevent the resist from suffering from the deactivation of acid during the delay time between exposure and post exposure bake (PEB). The new design of matrix resin containing amide functional group has advantages over current lithographic techniques. The effects of amide functional group as a basic additive in a chemically amplified resist was investigated. A new class of matrix resin containing amide functional group, poly(hydroxystyrene-co-t- butyl acrylate-co-3-(t-butoxycarbonyl)-1-vinyl-2-caprolactam), was developed. It showed 0.20 micrometer lines/spaces patterns of this resist using KrF excimer stepper (NA 0.55, partial coherence factor 0.55) with an exposure dose of 25 mJ/cm2. This resist showed no change of pattern profile after 2 hours post exposure delay in which ammonia concentration is 5 ppb. 3-(t-butoxycarbonyl)-1-vinyl-2-caprolatam (BCVC) unit as a basic additive can not only solve amine contamination effectively, but also improve the resolution of the resist. BCVC unit reduces the diffusion of acid and it results in sharp contrast at the interface between the exposed and unexposed areas. Therefore, adding BCVC unit in matrix resin leads to the stabilization of the pattern profile and higher resolution.

  4. Tritium accident containment within a large fusion enclosure: cost, benefit, and risk considerations

    SciTech Connect

    Sherwood, A.E.

    1983-01-01

    Containment of a tritium accident within a large fusion device building will be difficult and costly. Complete containment is impossible, and with this fact in mind, the global dispersion and health effects of tritium are reviewed. Atmospheric tritium emissions lead to an estimated population dose to the Northern Hemisphere of 5.6 x 10/sup -3/ man-rem/Ci, which may also be interpreted as 1 cancer fatality per MCi. Updating the NRC $1000 per man-rem criterion to 1982 costs gives 9.5 $/y per Ci/y as the unit annual health benefit rate from averting tritium release at a continuous rate. Present worth considerations lead to an estimate of $100 per Ci/y for the maximum capital investment justified per expected curie per year of tritium release averted. A simplified enclosure model is used to explore the trade-off between processing capacity and recycle time with the health cost of residual tritium release included in the analysis.

  5. Elaboration of a global strategy for containing microbial drug resistance.

    PubMed

    Zabicki, W

    2001-01-01

    The World Health Organization is engaged in developing the Global Strategy for Containment of Antimicrobial Resistance. The preliminary document WHO/CDC/CSR/DRS/2000.I Draft has already been distributed, and remarks have been solicited.
    The World Health Assembly Resolution of 1998 urged Member States to encourage the appropriate and cost-effective use of antimicrobials. Member States were requested to implement effective systems of microbial resistance surveillance and to monitor volumes and patterns of antimicrobial drug use.
    The phenomenon of antimicrobial resistance is rising rapidly and causing growing international concern. Many countries have undertaken their own national plans to address the problem.
    The overall aim of the strategy being developed is to find the most effective forms and to prevent the spread of antimicrobial resistance and resistant microbes. The strategy covers the following topics: patients and general community, prescribers, hospitals, veterinarians, manufacturers and drug dispensers, and international aspects.
    The strategy is being developed on the basis of expert opinions, published reports, reviews of specific topics specially commissioned by various international and national bodies, and a large body of literature with a list of publications containing over 100 items. PMID:17986973

  6. Oxygen plasma resistant phosphine oxide containing imide/arylene copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J.

    1993-01-01

    A series of oxygen plasma resistant imide/arylene ether copolymers were prepared by reacting anhydride-terminated poly(amide acids) and amine-terminated polyarylene ethers containing phosphine oxide units. Inherent viscosities for these copolymers ranged from 0.42 to 0.80 dL/g. After curing, the resulting copolymers had glass transition temperatures ranging from 224 C to 228 C. Solution cast films of the block copolymers were tough and flexible with tensile strength, tensile moduli, and elongation at break up to 16.1 ksi, 439 ksi, and 23 percent, respectively at 25 C and 9.1 ksi, 308 ksi and 97 percent, respectively at 150 C. The copolymers show a significant improvement in resistance to oxygen plasma when compared to the commercial polyimide Kapton. The imide/arylene ether copolymers containing phosphine oxide units are suitable as coatings, films, adhesives, and composite matrices.

  7. Fire-resistant phosphorus containing polyimides and copolyimides

    NASA Technical Reports Server (NTRS)

    Mikroyannidis, J. A. (Inventor)

    1985-01-01

    Phosphorus-containing polyimides and copolyimides are synthesized in a two-step polycondensation reaction from 1- (diorganooxyphosphonl)methly 2,4- and 2,6-diaminobenzenes and tetracarboxylic anhydride. The diorgano position of the diorganooxyphosphonyl group includes alkyl, such as ethyl, substituted alkyl, such as 2-chloroethyl, and aryl such as phenyl. The tetracarboxylic anhydries include compounds such as pyrometallitic dianhydride and benzophenone tetracarboxylic dianhydride. The glass transition temperature (Tg) of the polyimides is reduced by incorporation of the (dialkoxyphosphonyl)methyl groups. The phosphorus-containing copolyimides show a considerably higher degree of fire-resistance as compared to that of the corresponding common polyimides.

  8. Multidrug-resistant tuberculosis treatment with linezolid-containing regimen

    PubMed Central

    Farshidpour, Maham; Ebrahimi, Golnaz; Mirsaeidi, Mehdi

    2014-01-01

    The following is a case of multidrug-resistant pulmonary tuberculosis (MDR-TB) that was treated successfully with a linezolid-containing regimen. It was found that linezolid is an efficient medicine for MDR-TB treatment with an acceptable side effect profile. Treatment was maintained for 18 months, and closely monitoring toxicities did not reveal evidence of any neurologic adverse effects. However, despite our expectation, thrombocytopenia was seen after 2 years follow-up. PMID:25110635

  9. Chemical aspects of silicon-containing bilayer resists

    NASA Astrophysics Data System (ADS)

    Boardman, Larry D.; Kessel, Carl R.; Rhyner, Steven J.

    1999-06-01

    We have prepare several novel silicon-containing polymers containing both low Ea and high Ea protecting groups, and we have evaluated these materials at both 193 nm. Low Ea acetal-containing polymers were prepared by reacting poly(4-vinylphenol) with novel silyl enol ethers. The ease of protecting group cleavage in these materials is manifested in the immediate formation of a strong latent image after exposure. High Ea polymers were prepared by introducing tertiary esters which contain the tris(trimethylsilyl)silyl group, and both methacrylate copolymers and norbornene-maleic anhydride copolymers containing this group have been synthesized. Both of these materials show good oxygen plasma etch resistance, with the latter demonstrating superior adhesion to poly(4- vinylphenol) planarizing layers. The tris(trimethylsilyl)silyl group imparts a high degree of hydrophobicity to coatings of many of these materials. Acid- catalyzed deprotection of these tertiary esters affords the corresponding carboxylic acids and 1-silyl-3-methylbutenes, and the liberation of these olefins is significantly faster than the loss of isobutylene from the tert-butyl analogs.

  10. Comparison of experimental and analytical temperatures achieved by DT-18 and PC-1 shipping containers during hypothetical thermal accident tests

    SciTech Connect

    Anderson, J.C.

    1992-03-01

    Temperatures were monitored at various locations on DT-18 and PC-1 shipping packages during furnace tests at the Y-12 Plant in Oak Ridge, Tennessee. The furnace tests are intended to simulate hypothetical thermal accident conditions specified in Title 10 CFR, Pt. 71.73 (c)(3). Maximum temperatures of the outer containers ranged from 750 to 965{degrees}C while typical maximum temperatures recorded on the inner containers were 60 to 77{degrees}C. One exceptionally high temperature of 196{degrees}C occurred on the PC-1 inner container. Heating 7.1 models of both the DT-18 and PC-1 packages were developed. Models with and without heat generation in the inner containers were developed for each shipping package. The models with heat generation are intended to simulate condensation and convection of hot vapors generated during the heating of the Celotex{trademark} insulating material used in the packages. In general, the analytical models calculate temperatures for the outer containers which agree well with the test data. The HEATING models with and without heat generation bound the inner container test data. These findings are significant in that they lead to the conclusion that heat is transferred to the inner containers through a mechanism other than conduction alone. The high temperature of 196{degrees}C recorded at the PC-1 inner container is within 4{degrees}C of the maximum temperature calculated by the PC-1 HEATING model with heat generation.

  11. Quench cooling of superheated debris beds in containment during LWR core meltdown accidents

    SciTech Connect

    Ginsberg, T.; Chen, J.C.

    1984-01-01

    Light water reactor core meltdown accident sequence studies suggest that superheated debris beds may settle on the concrete floor beneath the reactor vessel. A model for the heat transfer processes during quench of superheated debris beds cooled by an overlying pool of water has been presented in a prior paper. This paper discusses the coolability of decay-heated debris beds from the standpoint of their transient quench characteristics. It is shown that even though a debris bed configuration may be coolable from the point of view of steady-state decay heat removal, the quench behavior from an initially elevated temperature may lead to bed melting prior to quench of the debris.

  12. Thermal analysis of the 10-gallon and the 55-gallon DOT-6M containers with thermal boundary conditions corresponding to 10CFR71 normal transport and accident conditions

    SciTech Connect

    Sanchez, L.C.; Longenbaugh, R.S.; Moss, M.; Haseman, G.M.; Fowler, W.E.; Roth, E.P.

    1988-03-01

    This report describes the heat transfer analysis of the 10-gallon and 55-gallon 6M containers. The analysis was performed with boundary conditions corresponding to a normal transport condition and a hypothetical accident condition. Computational results indicated that the insulation material in the 6M containers will adequately protect the payload region of the 6M containers. 26 refs., 26 figs., 8 tabs.

  13. Corrosion-Resistant Container for Molten-Material Processing

    NASA Technical Reports Server (NTRS)

    Stern, Theodore G.; McNaul, Eric

    2010-01-01

    In a carbothermal process, gaseous methane is passed over molten regolith, which is heated past its melting point to a temperature in excess of 1,625 C. At this temperature, materials in contact with the molten regolith (or regolith simulant) corrode and lose their structural properties. As a result, fabricating a crucible to hold the molten material and providing a method of contact heating have been problematic. Alternative containment approaches use a large crucible and limit the heat zone of the material being processed, which is inefficient because of volume and mass constraints. Alternative heating approaches use non-contact heating, such as by laser or concentrated solar energy, which can be inefficient in transferring heat and thus require higher power heat sources to accomplish processing. The innovation is a combination of materials, with a substrate material having high structural strength and stiffness and high-temperature capability, and a coating material with a high corrosion resistance and high-temperature capability. The material developed is a molybdenum substrate with an iridium coating. Creating the containment crucible or heater jacket using this material combination requires only that the molybdenum, which is easily processed by conventional methods such as milling, electric discharge machining, or forming and brazing, be fabricated into an appropriate shape, and that the iridium coating be applied to any surfaces that may come in contact with the corrosive molten material. In one engineering application, the molybdenum was fashioned into a container for a heat pipe. Since only the end of the heat pipe is used to heat the regolith, the container has a narrowing end with a nipple in which the heat pipe is snugly fit, and the external area of this nipple, which contacts the regolith to transfer heat into it, is coated with iridium. At the time of this reporting, no single material has been found that can perform the functions of this combination

  14. Experimental results from containment piping bellows subjected to severe accident conditions: Results from bellows tested in corroded conditions. Volume 2

    SciTech Connect

    Lambert, L.D.; Parks, M.B.

    1995-10-01

    Bellows are an integral part of the containment pressure boundary in nuclear power plants. They are used at piping penetrations to allow relative movement between piping and the containment wall, while minimizing the load imposed on the piping and wall. Piping bellows are primarily used in steel containments; however, they have received limited use in some concrete (reinforced and prestressed) containments. In a severe accident they may be subjected to pressure and temperature conditions that exceed the design values, along with a combination of axial and lateral deflections. A test program to determine the leak-tight capacity of containment penetration bellows is being conducted at Sandia National Laboratories under the sponsorship of the US Nuclear Regulatory Commission. Several different bellows geometries, representative of actual containment bellows, have been subjected to extreme deflections along with pressure and temperature loads. The bellows geometries and loading conditions are described along with the testing apparatus and procedures. A total of nineteen bellows have been tested. Thirteen bellows were tested in ``like-new`` condition (results reported in Volume 1), and six were tested in a corroded condition. The tests showed that bellows in ``like-new`` condition are capable of withstanding relatively large deformations, up to, or near, the point of full compression or elongation, before developing leakage, while those in a corroded condition did not perform as well, depending on the amount of corrosion. The corroded bellows test program and results are presented in this report.

  15. Thermal analysis of an irradiated-fuel concrete integrated container under normal and fire-accident conditions. Report No. 89-242-K

    SciTech Connect

    Taralis, D.

    1990-01-01

    This study describes the development of the special purpose three-dimensional heat transfer computer code for the thermal analysis of a Concrete Integrated Container (CIC) for the transportation of 10-year cooled fuel under normal conditions and hypothetical fire accident conditions. Results are given for: Comparisons of theoretical predictions with existing half-scale CIC experimental results, and representative analytical results for full-scale CIC under normal and fire accident conditions.

  16. Possible Methods to Estimate Core Location in a Beyond-Design-Basis Accident at a GE BWR with a Mark I Containment Stucture

    SciTech Connect

    Walston, S; Rowland, M; Campbell, K

    2011-07-27

    It is difficult to track to the location of a melted core in a GE BWR with Mark I containment during a beyond-design-basis accident. The Cooper Nuclear Station provided a baseline of normal material distributions and shielding configurations for the GE BWR with Mark I containment. Starting with source terms for a design-basis accident, methods and remote observation points were investigated to allow tracking of a melted core during a beyond-design-basis accident. The design of the GE BWR with Mark-I containment highlights an amazing poverty of expectations regarding a common mode failure of all reactor core cooling systems resulting in a beyond-design-basis accident from the simple loss of electric power. This design is shown in Figure 1. The station blackout accident scenario has been consistently identified as the leading contributor to calculated probabilities for core damage. While NRC-approved models and calculations provide guidance for indirect methods to assess core damage during a beyond-design-basis loss-of-coolant accident (LOCA), there appears to be no established method to track the location of the core directly should the LOCA include a degree of fuel melt. We came to the conclusion that - starting with detailed calculations which estimate the release and movement of gaseous and soluble fission products from the fuel - selected dose readings in specific rooms of the reactor building should allow the location of the core to be verified.

  17. Analysis of Sodium Fire in the Containment Building of Prototype Fast Breeder Reactor Under the Scenario of Core Disruptive Accident

    SciTech Connect

    Rao, P.M.; Kasinathan, N.; Kannan, S.E.

    2006-07-01

    The potential for sodium release to reactor containment building from reactor assembly during Core Disruptive Accident (CDA) in Fast Breeder Reactors (FBR) is an important safety issue with reference to the structural integrity of Reactor Containment Building (RCB). For Prototype Fast Breeder Reactor (PFBR), the estimated sodium release under a CDA of 100 MJ energy release is 350 kg. The ejected sodium reacts easily with air in RCB and causes temperature and pressure rise in the RCB. For estimating the severe thermal consequences in RCB, different modes of sodium fires like pool and spray fires were analyzed by using SOFIRE -- II and NACOM sodium fire computer codes. Effects of important parameters like amount of sodium, area of pool, containment air volume and oxygen concentration have been investigated. A peak pressure rise of 7.32 kPa is predicted by SOFIRE II code for 350 kg sodium pool fire in 86,000 m{sup 3} RCB volume. Under sodium release as spray followed by unburnt sodium as pool fire mode analysis, the estimated pressure rise is 5.85 kPa in the RCB. In the mode of instantaneous combustion of sodium, the estimated peak pressure rise is 13 kPa. (authors)

  18. Galvanic corrosion study of container materials using zero resistance ammeter

    SciTech Connect

    Roy, A. K., LLNL

    1997-11-01

    Galvanic corrosion behavior of A 516 steel separately coupled to six different corrosion-resistant alloys was investigated in an acidic brine (pHa2.70) at 30{degree}C 60{degree}C and 80{degree}C using zero resistance ammeter technique. The corrosion-resistant alloys include Alloys 825, G-3, G-30, C-4 and C-22; and Ti Grade-12, which were coupled to A 516 steel at an anode-to- cathode area ratio of one. The galvanic current and galvanic potential were measured as a function of time at all three temperatures. Optical microscopic examination was also performed on all tested specimens to evaluate the extent of surface degradation due to galvanic coupling. The overall results are presented in this paper.

  19. GASFLOW: The theoretical model to analyze accidents in nuclear containments, confinements, and facility buildings

    SciTech Connect

    Travis, J.R.; Wilson, T.L.

    1993-05-01

    This report documents the governing physical equations for GASFLOW, a finite-volume computer code for solving transient, three-dimensional, compressible, Navier-Stokes equations for multiple gas species. The code is designed to be a best-estimate tool for predicting the transport, mixing, and combustion of hydrogen and other gases in nuclear reactor containments, confinements, and other facility buildings. An analysis with GASFLOW will result in time-dependent gas-species concentrations throughout the structure analyzed, and in the event of combustion the pressure and temperature loadings on the walls and internal structures. GASFLOW can model geometrically complex containment systems with multiple compartments and internal structures. It can calculate gas behavior of low-speed buoyancy-driven flows, of diffusion-dominated flows, and during deflagrations. The code can model condensation heat transfer to walls and internal structures by natural and forced convection; chemical kinetics of combustion of hydrogen or hydrocarbons fuels; and fluid turbulence. Heat conduction within walls and structures is considered one-dimensional.

  20. Analysis of containment performance and radiological consequences under severe accident conditions for the Advanced Neutron Source Reactor at the Oak Ridge National Laboratory

    SciTech Connect

    Kim, S.H.; Taleyarkhan, R.P.

    1994-01-01

    A severe accident study was conducted to evaluate conservatively scoped source terms and radiological consequences to support the Advanced Neutron Source (ANS) Conceptual Safety Analysis Report (CSAR). Three different types of severe accident scenarios were postulated with a view of evaluating conservatively scoped source terms. The first scenario evaluates maximum possible steaming loads and associated radionuclide transport, whereas the next scenario is geared towards evaluating conservative containment loads from releases of radionuclide vapors and aerosols with associated generation of combustible gases. The third scenario follows the prescriptions given by the 10 CFR 100 guidelines. It was included in the CSAR for demonstrating site-suitability characteristics of the ANS. Various containment configurations are considered for the study of thermal-hydraulic and radiological behaviors of the ANS containment. Severe accident mitigative design features such as the use of rupture disks were accounted for. This report describes the postulated severe accident scenarios, methodology for analysis, modeling assumptions, modeling of several severe accident phenomena, and evaluation of the resulting source term and radiological consequences.

  1. The aftermath of the Fukushima nuclear accident: Measures to contain groundwater contamination.

    PubMed

    Gallardo, Adrian H; Marui, Atsunao

    2016-03-15

    Several measures are being implemented to control groundwater contamination at the Fukushima Daiichi Nuclear Plant. This paper presents an overview of work undertaken to contain the spread of radionuclides, and to mitigate releases to the ocean via hydrological pathways. As a first response, contaminated water is being held in tanks while awaiting treatment. Limited storage capacity and the risk of leakage make the measure unsustainable in the long term. Thus, an impervious barrier has been combined with a drain system to minimize the discharge of groundwater offshore. Caesium in seawater at the plant port has largely dropped, although some elevated concentrations are occasionally recorded. Moreover, a dissimilar decline of the radioactivity in fish could indicate additional sources of radionuclides intake. An underground frozen shield is also being constructed around the reactors. This structure would reduce inflows to the reactors and limit the interaction between fresh and contaminated waters. Additional strategies include groundwater abstraction and paving of surfaces to lower water levels and further restrict the mobilisation of radionuclides. Technical difficulties and public distrust pose an unprecedented challenge to the site remediation. Nevertheless, the knowledge acquired during the initial work offers opportunities for better planning and more rigorous decisions in the future. PMID:26789364

  2. Thermal resistance of composite panels containing superinsulation and urethane foam

    SciTech Connect

    Wilkes, K.E.; Graves, R.S.; Childs, K.W.

    1996-09-01

    Laboratory data are presented on the thermal resistance of composite panels that incorporate superinsulation embedded in urethane foam. Composite panels were fabricated using four types of advanced insulations (three types of evacuated panel superinsulation and one type of gas-filled panel), and three foam blowing agents (CFC-11, HCFC-141b, and HCFC-142b/22 blend). Panels were also fabricated with only the urethane foam to serve as a baseline. Thermal measurements were performed using an ASTM C 518 Heat Flow Meter Apparatus. The thermal resistances of the panels were measured over a two-year period to detect whether any significant changes occurred. A computer model was used to analyze the data, adjusting for differences in size of the advanced insulations, and extrapolating to different sizes of composite panels.

  3. The Euratom-Rosatom ERCOSAM-SAMARA projects on containment thermal-hydraulics of current and future LWRs for severe accident management

    SciTech Connect

    Paladino, D.; Guentay, S.; Andreani, M.; Tkatschenko, I.; Brinster, J.; Dabbene, F.; Kelm, S.; Allelein, H. J.; Visser, D. C.; Benz, S.; Jordan, T.; Liang, Z.; Porcheron, E.; Malet, J.; Bentaib, A.; Kiselev, A.; Yudina, T.; Filippov, A.; Khizbullin, A.; Kamnev, M.; Zaytsev, A.; Loukianov, A.

    2012-07-01

    During a postulated severe accident with core degradation, hydrogen would form in the reactor pressure vessel mainly due to high temperatures zirconium-steam reaction and flow together with steam into the containment where it will mix with the containment atmosphere (steam-air). The hydrogen transport into the containment is a safety concern because it can lead to explosive mixtures through the associated phenomena of condensation, mixing and stratification. The ERCOSAM and SAMARA projects, co-financed by the European Union and the Russia, include various experiments addressing accident scenarios scaled down from existing plant calculations to different thermal-hydraulics facilities (TOSQAN, MISTRA, PANDA, SPOT). The tests sequences aim to investigate hydrogen concentration build-up and stratification during a postulated accident and the effect of the activation of Severe Accident Management systems (SAMs), e.g. sprays, coolers and Passive Auto-catalytic Recombiners (PARs). Analytical activities, performed by the project participants, are an essential component of the projects, as they aim to improve and validate various computational methods. They accompany the projects in the various phases; plant calculations, scaling to generic containment and to the different facilities, planning pre-test and post-test simulations are performed. Code benchmark activities on the basis of conceptual near full scale HYMIX facility will finally provide a further opportunity to evaluate the applicability of the various methods to the study of scaling issues. (authors)

  4. Selection and Spread of Artemisinin-Resistant Alleles in Thailand Prior to the Global Artemisinin Resistance Containment Campaign

    PubMed Central

    Talundzic, Eldin; Okoth, Sheila Akinyi; Congpuong, Kanungnit; Plucinski, Mateusz M.; Morton, Lindsay; Goldman, Ira F.; Kachur, Patrick S.; Wongsrichanalai, Chansuda; Satimai, Wichai; Barnwell, John W.; Udhayakumar, Venkatachalam

    2015-01-01

    The recent emergence of artemisinin resistance in the Greater Mekong Subregion poses a major threat to the global effort to control malaria. Tracking the spread and evolution of artemisinin-resistant parasites is critical in aiding efforts to contain the spread of resistance. A total of 417 patient samples from the year 2007, collected during malaria surveillance studies across ten provinces in Thailand, were genotyped for the candidate Plasmodium falciparum molecular marker of artemisinin resistance K13. Parasite genotypes were examined for K13 propeller mutations associated with artemisinin resistance, signatures of positive selection, and for evidence of whether artemisinin-resistant alleles arose independently across Thailand. A total of seven K13 mutant alleles were found (N458Y, R539T, E556D, P574L, R575K, C580Y, S621F). Notably, the R575K and S621F mutations have previously not been reported in Thailand. The most prevalent artemisinin resistance-associated K13 mutation, C580Y, carried two distinct haplotype profiles that were separated based on geography, along the Thai-Cambodia and Thai-Myanmar borders. It appears these two haplotypes may have independent evolutionary origins. In summary, parasites with K13 propeller mutations associated with artemisinin resistance were widely present along the Thai-Cambodia and Thai-Myanmar borders prior to the implementation of the artemisinin resistance containment project in the region. PMID:25836766

  5. Producing a Mammalian GFP Expression Vector Containing Neomycin Resistance Gene.

    PubMed

    Izadi, Manizheh; Abiri, Maryam; Keramatipour, Mohammad

    2009-04-01

    The green fluorescent protein (GFP) was originally isolated from the Jellyfish Aequorea Victoria that fluoresces green when exposed to blue light. GFP protein is composed of 238 amino acids with the molecular mass of 26.9 kD. The GFP gene is frequently used in cellular and molecular biology as a reporter gene. To date, many bacterial, yeast, fungal, plants, fly and mammalian cells, including human, have been created which express GFP. Martin Chalfie, Osamu Shimomura, and Roger Tsien were awarded the 2008 noble prize in chemistry for their discovery and development of GFP. In many studies on mammalian cells, GFP gene is introduced into cells using vector-based systems or a recombinant virus to track the location of a target protein or to study the expression level of the gene of interest, but in these studies there is no selection marker to normalize transfection. According to the importance of neomycin gene as a selection marker in mammalian cells, we aimed to produce a GFP expression vector that contains neomycin gene. GFP gene was separated from pEGFP-N1 vector and was inserted in the back-bone of pCDNA3.1/His/LacZ vector that contained the neomycin gene. The resulted vector contained GFP beside neomycin gene. PMID:23407141

  6. Novel fire-resistant polyphosphazenes and phosphazene-containing polymers

    NASA Astrophysics Data System (ADS)

    Taylor, Jonathan Paul

    A functionalized polyphosphazene, poly[bis(carboxylatophenoxy)phosphazene], was blended with a structural polyurethane via reactive mixing of the polymer with diisocyanate and diol prepolymers. The thermal stabilities of the resultant foams were analyzed by thermogravimetric analysis (TGA). Both qualitative and quantitative flame tests indicated an increase in flame resistance at loadings of 20 wt% and above. Methods for the incorporation of phosphate and phosphonate units into the side groups of phosphazenes are described and evaluated. Halogenated organophosphates were used as the phosphorylating agents and were allowed to react with hydroxyl- or lithio-functionalized phosphazenes. Well defined phosphorylated cyclic trimers were synthesized from the hydroxyl-functionalized precursors, and these were examined as flame retardant additives to polystyrene. The thermal stabilities of the high polymers made by this route were analyzed by TGA. Ring-opening metathesis polymerization (ROMP) of phosphazene-functionalized norbornenes was demonstrated with the use of the Grubbs catalyst. This allowed the incorporation of alkoxy-, fluoroalkoxy-, and aryloxy-derived cyclic phosphazenes as side groups linked to the organic polymer backbone. The polymers were obtained in moderate yields with the properties being dependent on the side groups present and on the molecular weight. In addition, cyclooctenes and norbornenes with cyclic phosphazene side units bearing trifluoroethoxy or phenoxy groups were polymerized via ROMP using a ruthenium based initiator. The same monomers were also copolymerized with 90--99 mole percent of cyclooctene, norbornene, dicyclopentadiene, or exo,exo-5,6-bis(methoxycarbonyl)-7-oxabicyclo[2.2.1]hept-2-ene. The presence of as little as 2 mol% of the cyclic phosphazene in the copolymers dramatically reduced the combustibility. Poly(diphenyl-p-styrylphosphine) and copolymers of diphenyl- p-styrylphosphine with either styrene or methyl methacrylate were

  7. New thermal and microbial resistant metal-containing epoxy polymers.

    PubMed

    Ahamad, Tansir; Alshehri, Saad M

    2010-01-01

    A series of metal-containing epoxy polymers have been synthesized by the condensation of epichlorohydrin (1-chloro-2,3-epoxy propane) with Schiff base metal complexes in alkaline medium. Schiff base was initially prepared by the reaction of 2,6 dihydroxy 1-napthaldehyde and o-phenylenediamine in 1 : 2 molar ratio and then with metal acetate. All the synthesized compounds were characterized by elemental, spectral, and thermal analysis. The physicochemical properties, viz., epoxy value, hydroxyl content, and chlorine content [mol/100 g] were measured by standard procedures. The antimicrobial activities of these metal-containing epoxy polymers were carried out by using minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) methods against S. aureus, B. subtilis (Gram-positive bacteria), and E. coli, P. aeruginosa (Gram-negative bacteria). It was found that the ECu(II) showed higher antibacterial activity than other metal-chelated epoxy resin while EMn(II) exhibited reduced antibacterial activity against all bacteria. PMID:20689716

  8. New Thermal and Microbial Resistant Metal-Containing Epoxy Polymers

    PubMed Central

    Ahamad, Tansir; Alshehri, Saad M.

    2010-01-01

    A series of metal-containing epoxy polymers have been synthesized by the condensation of epichlorohydrin (1-chloro-2,3-epoxy propane) with Schiff base metal complexes in alkaline medium. Schiff base was initially prepared by the reaction of 2,6 dihydroxy 1-napthaldehyde and o-phenylenediamine in 1  :  2 molar ratio and then with metal acetate. All the synthesized compounds were characterized by elemental, spectral, and thermal analysis. The physicochemical properties, viz., epoxy value, hydroxyl content, and chlorine content [mol/100 g] were measured by standard procedures. The antimicrobial activities of these metal-containing epoxy polymers were carried out by using minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) methods against S. aureus, B. subtilis (Gram-positive bacteria), and E. coli, P. aeruginosa (Gram-negative bacteria). It was found that the ECu(II) showed higher antibacterial activity than other metal-chelated epoxy resin while EMn(II) exhibited reduced antibacterial activity against all bacteria. PMID:20689716

  9. Water Resistant Container Technical Basis Document for the TA-55 Criticality Safety Program

    SciTech Connect

    Smith, Paul Herrick; Teague, Jonathan Gayle

    2015-04-30

    Criticality safety at TA-55 relies on nuclear material containers that are water resistant to prevent significant amounts of water from coming into contact with fissile material in the event of a fire that causes a breach of glovevbox confinement and subsequent fire water ingress. A “water tight container” is a container that will not allow more than 50ml of water ingress when fully submerged, except when under sufficient pressure to produce structural discontinuity. There are many types of containers, welded containers, hermetically sealed containers, filtered containers, etc.

  10. The antimicrobial resistance containment and surveillance approach--a public health tool.

    PubMed Central

    Simonsen, Gunnar S.; Tapsall, John W.; Allegranzi, Benedetta; Talbot, Elizabeth A.; Lazzari, Stefano

    2004-01-01

    Antimicrobial drug resistance (AMR) is widely recognized as a global public health threat because it endangers the effectiveness of treatment of infectious diseases. In 2001 WHO issued the Global Strategy for Containment of Antimicrobial Resistance, but it has proved difficult to translate the recommendations of the Global Strategy into effective public health actions. The purpose of the Antimicrobial Resistance Containment and Surveillance (ARCS) approach is to facilitate the formulation of public health programmes and the mobilization of human and financial resources for the containment of AMR. The ARCS approach highlights the fundamental link between rational drug use and containment of AMR. Clinical management of human and animal infections should be improved through better disease control and prevention, high quality diagnostic testing, appropriate treatment regimens and consumer health education. At the same time, systems for supplying antimicrobial drugs should include appropriate regulations, lists of essential drugs, and functional mechanisms for the approval and delivery of drugs. Containment of AMR is defined in the ARCS approach as the continuous application of this package of core interventions. Surveillance of the extent and trends of antimicrobial resistance as well as the supply, selection and use of antimicrobial drugs should be established to monitor the process and outcome of containment of AMR. The ARCS approach is represented in the ARCS diagram (Fig. 2) which provides a simplified, but comprehensive illustration of the complex problem of containment and monitoring of AMR. PMID:15654407

  11. U.S. Department of Energy Accident Resistant SiC Clad Nuclear Fuel Development

    SciTech Connect

    George W. Griffith

    2011-10-01

    A significant effort is being placed on silicon carbide ceramic matrix composite (SiC CMC) nuclear fuel cladding by Light Water Reactor Sustainability (LWRS) Advanced Light Water Reactor Nuclear Fuels Pathway. The intent of this work is to invest in a high-risk, high-reward technology that can be introduced in a relatively short time. The LWRS goal is to demonstrate successful advanced fuels technology that suitable for commercial development to support nuclear relicensing. Ceramic matrix composites are an established non-nuclear technology that utilizes ceramic fibers embedded in a ceramic matrix. A thin interfacial layer between the fibers and the matrix allows for ductile behavior. The SiC CMC has relatively high strength at high reactor accident temperatures when compared to metallic cladding. SiC also has a very low chemical reactivity and doesn't react exothermically with the reactor cooling water. The radiation behavior of SiC has also been studied extensively as structural fusion system components. The SiC CMC technology is in the early stages of development and will need to mature before confidence in the developed designs can created. The advanced SiC CMC materials do offer the potential for greatly improved safety because of their high temperature strength, chemical stability and reduced hydrogen generation.

  12. Evaluation of severe accident risks: Methodology for the containment, source term, consequence, and risk integration analyses; Volume 1, Revision 1

    SciTech Connect

    Gorham, E.D.; Breeding, R.J.; Brown, T.D.; Harper, F.T.; Helton, J.C.; Murfin, W.B.; Hora, S.C.

    1993-12-01

    NUREG-1150 examines the risk to the public from five nuclear power plants. The NUREG-1150 plant studies are Level III probabilistic risk assessments (PRAs) and, as such, they consist of four analysis components: accident frequency analysis, accident progression analysis, source term analysis, and consequence analysis. This volume summarizes the methods utilized in performing the last three components and the assembly of these analyses into an overall risk assessment. The NUREG-1150 analysis approach is based on the following ideas: (1) general and relatively fast-running models for the individual analysis components, (2) well-defined interfaces between the individual analysis components, (3) use of Monte Carlo techniques together with an efficient sampling procedure to propagate uncertainties, (4) use of expert panels to develop distributions for important phenomenological issues, and (5) automation of the overall analysis. Many features of the new analysis procedures were adopted to facilitate a comprehensive treatment of uncertainty in the complete risk analysis. Uncertainties in the accident frequency, accident progression and source term analyses were included in the overall uncertainty assessment. The uncertainties in the consequence analysis were not included in this assessment. A large effort was devoted to the development of procedures for obtaining expert opinion and the execution of these procedures to quantify parameters and phenomena for which there is large uncertainty and divergent opinions in the reactor safety community.

  13. Severe accident testing of electrical penetration assemblies

    SciTech Connect

    Clauss, D.B. )

    1989-11-01

    This report describes the results of tests conducted on three different designs of full-size electrical penetration assemblies (EPAs) that are used in the containment buildings of nuclear power plants. The objective of the tests was to evaluate the behavior of the EPAs under simulated severe accident conditions using steam at elevated temperature and pressure. Leakage, temperature, and cable insulation resistance were monitored throughout the tests. Nuclear-qualified EPAs were produced from D. G. O'Brien, Westinghouse, and Conax. Severe-accident-sequence analysis was used to generate the severe accident conditions (SAC) for a large dry pressurized-water reactor (PWR), a boiling-water reactor (BWR) Mark I drywell, and a BWR Mark III wetwell. Based on a survey conducted by Sandia, each EPA was matched with the severe accident conditions for a specific reactor type. This included the type of containment that a particular EPA design was used in most frequently. Thus, the D. G. O'Brien EPA was chosen for the PWR SAC test, the Westinghouse was chosen for the Mark III test, and the Conax was chosen for the Mark I test. The EPAs were radiation and thermal aged to simulate the effects of a 40-year service life and loss-of-coolant accident (LOCA) before the SAC tests were conducted. The design, test preparations, conduct of the severe accident test, experimental results, posttest observations, and conclusions about the integrity and electrical performance of each EPA tested in this program are described in this report. In general, the leak integrity of the EPAs tested in this program was not compromised by severe accident loads. However, there was significant degradation in the insulation resistance of the cables, which could affect the electrical performance of equipment and devices inside containment at some point during the progression of a severe accident. 10 refs., 165 figs., 16 tabs.

  14. FATAL ACCIDENT REPORTING SYSTEM (FARS)

    EPA Science Inventory

    The Fatal Accident Reporting System (FARS) database consist of three relational tables, containing data on automobile accidents on public U.S. roads that resulted in the death of one or more people within 30 days of the accident. Truck and trailer accidents are also included.

  15. Experimental results from containment piping bellows subjected to severe accident conditions. Volume 1, Results from bellows tested in `like-new` conditions

    SciTech Connect

    Lambert, L.D.; Parks, M.B.

    1994-09-01

    Bellows are an integral part of the containment pressure boundary in nuclear power plants. They are used at piping penetrations to allow relative movement between piping and the containment wall, while minimizing the load imposed on the piping and wall. Piping bellows are primarily used in steel containments; however, they have received limited use in some concrete (reinforced and prestressed) containments. In a severe accident they may be subjected to pressure and temperature conditions that exceed the design values, along with a combination of axial and lateral deflections. A test program to determine the leak-tight capacity of containment penetration bellows is being conducted under the sponsorship of the US Nuclear Regulatory Commission at Sandia National Laboratories. Several different bellows geometries, representative of actual containment bellows, have been subjected to extreme deflections along with pressure and temperature loads. The bellows geometries and loading conditions are described along with the testing apparatus and procedures. A total of thirteen bellows have been tested, all in the `like-new` condition. (Additional tests are planned of bellows that have been subjected to corrosion.) The tests showed that bellows are capable of withstanding relatively large deformations, up to, or near, the point of full compression or elongation, before developing leakage. The test data is presented and discussed.

  16. A collaborative initiative for the containment of antimicrobial resistance in Mexico.

    PubMed

    Zaidi, Mussaret B; Dreser, Anahi; Figueroa, Inda Marcela

    2015-04-01

    Antimicrobial resistance exacts worldwide an increasingly significant clinical and economic toll. Despite the international calls for urgent action, antimicrobial use and resistance have been low on the Mexican government's policy agenda. In early 2010, a multidisciplinary group of experts launched a national initiative for containment of antimicrobial resistance that was endorsed by major medical, veterinary and public health institutions. The initiative called for seven priority actions including the creation of an ad hoc intersectoral advisory group, a requirement that human and veterinary antibiotics be dispensed only with prescription, and the establishment of effective surveillance systems. A consensus document was disseminated among key decision-makers at the ministries of Health and Agriculture and the legislature. The Ministry of Health (MoH) enacted a decree effective as of August 2010, which enforced the regulations that required medical prescriptions for the sale of human antibiotics. While the information disseminated by the MoH did focus on the dangers of self-medication, it failed to highlight the inherent perils of antibiotic resistance or the consequences of antibiotic use in food-animals. Following the decree, there was a surge of medical offices controlled by retail pharmacies. In the veterinary sector, voluntary guidelines were developed for good husbandry practices, including antibiotic use in food animals; five antimicrobials for use in food-animals were banned. No intersectoral advisory group or surveillance systems were established. This study describes a bottom-top approach in Mexico for the development of a national strategy to improve antibiotic use and contain antimicrobial resistance. Its experiences suggest that, in countries such as Mexico that lack strong regulatory systems and surveillance capacities, a more systemic approach is warranted. Future efforts should begin with early involvement of key stakeholders and informing policy

  17. Development of Alkyne-Containing Pyrazolopyrimidines To Overcome Drug Resistance of Bcr-Abl Kinase.

    PubMed

    Liu, Xu; Kung, Alvin; Malinoski, Brock; Prakash, G K Surya; Zhang, Chao

    2015-12-10

    Despite the success of imatinib at inhibiting Bcr-Abl and treating chronic myelogenous leukemia (CML), resistance to the therapy occurs over time in patients. In particular, the resistance to imatinib caused by the gatekeeper mutation T315I in Bcr-Abl remains a challenge in the clinic. Inspired by the successful development of ponatinib to curb drug resistance, we hypothesize that the incorporation of an alkyne linker in other heterocyclic scaffolds can also achieve potent inhibition of Bcr-Abl(T315I) by allowing for simultaneous occupancy of both the active site and the allosteric pocket in the Abl kinase domain. Herein, we describe the design, synthesis, and characterization of a series of alkyne-containing pyrazolopyrimidines as Bcr-Abl inhibitors. Our results demonstrate that some alkyne-containing pyrazolopyrimidines potently inhibit not only Abl(T315I) in vitro but also Bcr-Abl(T315I) in cells. These pyrazolopyrimidines can serve as lead compounds for future development of novel targeted therapy to overcome drug resistance of CML. PMID:26562217

  18. Competitive Interaction Between Phytophthora Infestans Effectors Leads to Increased Aggressiveness on Plants Containing Broad-spectrum Late Blight Resistance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The resistance (R) gene RB confers broad-spectrum resistance to potato late blight and belongs. The RB protein recognizes the presence of members of the Phytophthora infestans effector family IPI-O to elicit resistance. Most isolates of the pathogen contain IPI-O variants that are recognized by R...

  19. Competitive Interaction Between Phytophthora Infestans Effectors Leads to Increased Aggressiveness on Plants Containing Broad-spectrum Late Blight Resistance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The resistance (R) gene RB confers broad-spectrum resistance to potato late blight and belongs. The RB protein recognizes the presence of members of the Phytophthora infestans effector family IPI-O to elicit resistance. Most isolates of the pathogen contain IPI-O variants that are recognized by RB...

  20. Carcinomas contain an MMP-resistant isoform of type I collagen exerting selective support to invasion

    PubMed Central

    Makareeva, Elena; Han, Sejin; Vera, Juan Carlos; Sackett, Dan L.; Holmbeck, Kenn; Phillips, Charlotte L.; Visse, Robert; Nagase, Hideaki; Leikin, Sergey

    2010-01-01

    Collagen fibers affect metastasis in two opposing ways, by supporting invasive cells but also generating a barrier to invasion. We hypothesized that these functions might be performed by different isoforms of type I collagen. Carcinomas are reported to contain α1(I)3 homotrimers, a type I collagen isoform normally not present in healthy tissues, but the role of the homotrimers in cancer pathophysiology is unclear. In this study, we found that these homotrimers were resistant to all collagenolytic matrix metalloproteinases (MMPs). MMPs are massively produced and utilized by cancer cells and cancer-associated fibroblasts for degrading stromal collagen at the leading edge of tumor invasion. The MMP-resistant homotrimers were produced by all invasive cancer cell lines tested, both in culture and in tumor xenografts, but they were not produced by cancer-associated fibroblasts, thereby comprising a specialized fraction of tumor collagen. We observed the homotrimer fibers to be resistant to pericellular degradation, even upon stimulation of the cells with pro-inflammatory cytokines. Further, we confirmed an enhanced proliferation and migration of invasive cancer cells on the surface of homotrimeric vs. normal (heterotrimeric) type I collagen fibers. In summary, our findings suggest that invasive cancer cells may utilize homotrimers for building MMP-resistant invasion paths, supporting local proliferation and directed migration of the cells while surrounding normal stromal collagen is cleaved. Because the homotrimers are universally secreted by cancer cells and deposited as insoluble, MMP-resistant fibers, they offer an appealing target for cancer diagnostics and therapy. PMID:20460529

  1. Evaluation of containment peak pressure and structural response for a large-break loss-of-coolant accident in a VVER-440/213 NPP

    SciTech Connect

    Spencer, B.W.; Sienicki, J.J.; Kulak, R.F.; Pfeiffer, P.A.; Voeroess, L.; Techy, Z.; Katona, T.

    1998-07-01

    A collaborative effort between US and Hungarian specialists was undertaken to investigate the response of a VVER-440/213-type NPP to a maximum design-basis accident, defined as a guillotine rupture with double-ended flow from the largest pipe (500 mm) in the reactor coolant system. Analyses were performed to evaluate the magnitude of the peak containment pressure and temperature for this event; additional analyses were performed to evaluate the ultimate strength capability of the containment. Separate cases were evaluated assuming 100% effectiveness of the bubbler-condenser pressure suppression system as well as zero effectiveness. The pipe break energy release conditions were evaluated from three sources: (1) FSAR release rate based on Soviet safety calculations, (2) RETRAN-03 analysis and (3) ATHLET analysis. The findings indicated that for 100% bubbler-condenser effectiveness the peak containment pressures were less than the containment design pressure of 0.25 MPa. For the BDBA case of zero effectiveness of the bubbler-condenser system, the peak pressures were less than the calculated containment failure pressure of 0.40 MPa absolute.

  2. Droplet heat transfer and chemical reactions during direct containment heating

    SciTech Connect

    Baker, L. Jr.

    1986-01-01

    A simplified model of heat transfer and chemical reaction has been adapted to evaluate the expected behavior of droplets containing unreacted Zircaloy and stainless steel moving through the containment atmosphere during postulated accidents involving direct containment heating. The model includes internal and external diffusive resistances to reaction. The results indicate that reactions will be incomplete for many conditions characteristic of direct containment heating sequences.

  3. Best-bet integrated strategies for containing drug-resistant trypanosomes in cattle

    PubMed Central

    2012-01-01

    Background African animal trypanosomosis is a major constraint to the rearing of productive livestock in the sub-humid Sudan-Sahel zone of West Africa where cotton is grown. Trypanosomosis is mainly controlled using trypanocidal drugs, but the effective use of drugs is threatened by the development of widespread resistance. This study tested integrated best-bet strategies for containment and/ or reversal of trypanocide resistance in villages in south-east Mali where resistance has been reported. Methods Four sentinel villages each from an intervention area (along the road from Mali to Burkina Faso) and a control area (along the road from Mali to Côte d’Ivoire) were selected for the study. Tsetse control was based on deltamethrin-treated stationary attractive devices and targeted cattle spraying between March 2008 and November 2009. Trypanosome-positive cattle were selectively treated with 3.5 mg/kg diminazene aceturate. Strategic helminth control using 10 mg/kg albendazole was also undertaken. During the intervention, tsetse densities along drainage lines, trypanosome infections and faecal egg counts in risk cattle (3 to 12 months of age) were monitored. Results Catch reductions of 66.5 % in Glossina palpalis gambiensis and 90 % in G. tachinoides were observed in the intervention area. Trypanosome prevalence was significantly (p < 0.05) lower in the intervention area (2.3 %; 1.3-3.6 %) compared to the control area (17.3 %; 14.8-20.1 %). Albendazole treatment resulted in a faecal egg count reduction of 55.6 % and reduced trypanosome infection risk (2.9 times lower than in the placebo group) although not significantly (p > 0.05). Further studies are required before confirming the existence of albendazole resistant strongyles in the study area. Conclusion Integration of best-bet strategies in areas of multiple drug-resistance is expected to reduce trypanosome infection risk thus contributing to containment of trypanocidal drug resistance

  4. Further characterization of the B-1023 furnace for use in hypothetical thermal accident testing of shipping containers in accordance with 10 CFR Part 71

    SciTech Connect

    Feldman, M.R.

    1992-02-01

    The B-1023 furnace is Building 9204-4 at the Oak Ridge Y-12 Plant in Tennessee, is used for hypothetical thermal accident (HTA) testing of shipping containers in accordance with 10 CFR 71.73(c)(3). That document requires that a very specific radiant (and convective) thermal environment be present during an HTA test. Experiments have been performed to determine the surface temperatures that are present within the furnace which thus determine the radiant thermal environment. Conclusions have been drawn based on these experiments, and it has been found that it is possible to perform conforming HTA tests in this furnace if a very specific test routine is carefully followed. Recommendations concerning the procedure to be used during future tests have been made.

  5. Prevalence of silver resistance in bacteria isolated from diabetic foot ulcers and efficacy of silver-containing wound dressings.

    PubMed

    Percival, Steven L; Woods, Emma; Nutekpor, Moses; Bowler, Phil; Radford, Alan; Cochrane, Christine

    2008-03-01

    Silver dressings are used to manage wounds at risk of infection or locally infected. This in vitro study was conducted to assess the prevalence of silver resistance genes in 112 bacterial isolates obtained from the diabetic foot ulcers of patients attending the Diabetic Foot Clinic at Tameside General Hospital, UK. Using polymerase chain reaction to screen for three silver-resistance transcriptional units--silE, silS and silP--two silver-resistant bacteria were identified; both are strains of Enterobacter cloacae, an organism rarely implicated as a primary pathogen in chronic wounds. No recognized wound pathogens (Staphylococcus aureus-24 isolates and Pseudomonas aeruginosa-nine isolates) were found to contain silver-resistant genes. Analysis of the efficacy of silver-containing dressings on the silver-resistant strains of Enterobacter cloacae using confocal laser microscopy showed that, despite evidence of genetic resistance to silver, all strains were killed following a maximum of 48 hours of exposure to the dressings. Results suggest that presence of silver resistance genes is rare and that genetic resistance does not necessarily translate to phenotypic resistance to silver. While silver resistance in wound care should be monitored, the threat of widespread resistance is low and silver-containing dressings remain an extremely important tool in managing wound infection. PMID:18382046

  6. Cotransfer of antibiotic resistance genes and a hylEfm-containing virulence plasmid in Enterococcus faecium.

    PubMed

    Arias, Cesar A; Panesso, Diana; Singh, Kavindra V; Rice, Louis B; Murray, Barbara E

    2009-10-01

    The hyl(Efm) gene (encoding a putative hyaluronidase) has been found almost exclusively in Enterococcus faecium clinical isolates, and recently, it was shown to be on a plasmid which increased the ability of E. faecium strains to colonize the gastrointestinal tract. In this work, the results of mating experiments between hyl(Efm)-containing strains of E. faecium belonging to clonal cluster 17 and isolated in the United States and Colombia indicated that the hyl(Efm) gene of these strains is also carried on large plasmids (>145 kb) which we showed transfer readily from clinical strains to E. faecium hosts. Cotransfer of resistance to vancomycin and high-level resistance (HLR) to aminoglycosides (gentamicin and streptomycin) and erythromycin was also observed. The vanA gene cluster and gentamicin resistance determinants were genetically linked to hyl(Efm), whereas erm(B) and ant(6)-I, conferring macrolide-lincosamide-streptogramin B resistance and HLR to streptomycin, respectively, were not. A hyl(Efm)-positive transconjugant resulting from a mating between a well-characterized endocarditis strain [TX0016 (DO)] and a derivative of a fecal strain of E. faecium from a healthy human volunteer (TX1330RF) exhibited increased virulence in a mouse peritonitis model. These results indicate that E. faecium strains use a strategy which involves the recruitment into the same genetic unit of antibiotic resistance genes and determinants that increase the ability to produce disease. Our findings indicate that the acquisition of the hyl(Efm) plasmids may explain, at least in part, the recent successful emergence of some E. faecium strains as nosocomial pathogens. PMID:19667280

  7. Screen-printed resistive pressure sensors containing graphene nanoplatelets and carbon nanotubes.

    PubMed

    Janczak, Daniel; Słoma, Marcin; Wróblewski, Grzegorz; Młożniak, Anna; Jakubowska, Małgorzata

    2014-01-01

    Polymer composites with nanomaterials such as graphene nanoplatelets and carbon nanotubes are a new group of materials with high application possibilities in printed and flexible electronics. In this study such carbon nanomaterials were used as a conductive phase in polymer composites. Pastes with dispersed nanomaterials in PMMA and PVDF vehicles were screen printed on flexible substrates, and used as an active layer in pressure sensors, exploiting contact resistance phenomena. The relationship between resistance and pressure is nearly linear on a logarithmic scale for selected types of samples, and their response is several times higher than for similar sensors with graphite layers. The use of surfactants allowed us to fabricate evenly dispersed nanomaterials with different amount of nanoplatelets and nanotubes in the composites. The samples contained from 1.25 wt.% to 2 wt.% of graphene and 1 wt.% to 0.5 wt.% of nanotubes and exhibited diverse sheet resistivity. Experiments revealed the relationship between morphology and loading of functional phase in the polymer matrix and the sensors' sensitivity. PMID:25230310

  8. Screen-Printed Resistive Pressure Sensors Containing Graphene Nanoplatelets and Carbon Nanotubes

    PubMed Central

    Janczak, Daniel; Słoma, Marcin; Wróblewski, Grzegorz; Młożniak, Anna; Jakubowska, Małgorzata

    2014-01-01

    Polymer composites with nanomaterials such as graphene nanoplatelets and carbon nanotubes are a new group of materials with high application possibilities in printed and flexible electronics. In this study such carbon nanomaterials were used as a conductive phase in polymer composites. Pastes with dispersed nanomaterials in PMMA and PVDF vehicles were screen printed on flexible substrates, and used as an active layer in pressure sensors, exploiting contact resistance phenomena. The relationship between resistance and pressure is nearly linear on a logarithmic scale for selected types of samples, and their response is several times higher than for similar sensors with graphite layers. The use of surfactants allowed us to fabricate evenly dispersed nanomaterials with different amount of nanoplatelets and nanotubes in the composites. The samples contained from 1.25 wt.% to 2 wt.% of graphene and 1 wt.% to 0.5 wt.% of nanotubes and exhibited diverse sheet resistivity. Experiments revealed the relationship between morphology and loading of functional phase in the polymer matrix and the sensors' sensitivity. PMID:25230310

  9. Biocorrosion resistance of coated magnesium alloy by microarc oxidation in electrolyte containing zirconium and calcium salts

    NASA Astrophysics Data System (ADS)

    Wang, Ya-Ming; Guo, Jun-Wei; Wu, Yun-Feng; Liu, Yan; Cao, Jian-Yun; Zhou, Yu; Jia, De-Chang

    2014-09-01

    The key to use magnesium alloys as suitable biodegradable implants is how to adjust their degradation rates. We report a strategy to prepare biocompatible ceramic coating with improved biocorrosion resistance property on AZ91D alloy by microarc oxidation (MAO) in a silicate-K2ZrF6 solution with and without Ca(H2PO4)2 additives. The microstructure and biocorrosion of coatings were characterized by XRD and SEM, as well as electrochemical and immersion tests in simulated body fluid (SBF). The results show that the coatings are mainly composed of MgO, Mg2SiO4, m-ZrO2 phases, further Ca containing compounds involve the coating by Ca(H2PO4)2 addition in the silicate-K2ZrF6 solution. The corrosion resistance of coated AZ91D alloy is significantly improved compared with the bare one. After immersing in SBF for 28 d, the Si-Zr5-Ca0 coating indicates a best corrosion resistance performance.

  10. Laboratory ultrasonic and resistivity measurements on sedimentary rocks containing tetrahydrofuran hydrates

    SciTech Connect

    Pearson, C.F.; Murphy, J.R.; Hermes, R.E.; Halleck, P.M.

    1984-01-01

    In this paper, we report laboratory ultrasonic and resistivity measurements on Berea Sandstone and Austin Chalk samples saturated with a stoichiometric mixture of tetrahydrofuran (THF) and water. We used THF as the guest species rather than methane or propane gas because THF can be mixed with water to form a solution containing the proper stoichiometric proportions of the THF and water. Neither methane nor propane is soluble in water. Because THF solutions form hydrates readily at atmospheric pressure, it is an excellent experimental analogue to natural gas hydrates. Hydrate formation increased the ultrasonic P-wave velocities from a room temperature value of 2.5 km/s to 4.5 km/s at -5/sup 0/C when the pores were nearly filled with hydrates. However, lowering the temperature below -5/sup 0/C did not appreciably change the velocity. In contrast, the electrical resistivity increased nearly two orders of magnitude upon hydrate formation and continued to increase more slowly as the temperature was further decreased. In all cases the resistivities were nearly frequency independent to 30 kHz and the loss tangents were high, always greater than 5. The dielectric loss showed a linear decrease with frequency suggesting that ionic conduction through a brine phase dominates at all frequencies, even when the pores are nearly filled with hydrates. We find that the resistivities are strongly a function of the dissolved salt content of the pore water. Pore water salinity also influenced the sonic velocity, but this effect is much smaller and only important near the hydrate formation temperature. 11 references, 9 figures.

  11. Characterization of uranium and plutonium containing particles originating from the nuclear weapons accident in Thule, Greenland, 1968.

    PubMed

    Lind, O C; Salbu, B; Janssens, K; Proost, K; Dahlgaard, H

    2005-01-01

    To improve long-term radioecological impact assessment for the contaminated ecosystem of Bylot Sound, Greenland, U and Pu containing particles have been characterized with respect to particle size, elemental distribution, morphology and oxidation states. Based on scanning electron microscopy with XRMA, particles ranging from about 20 to 40 microm were isolated. XRMA and mu-XRF mapping demonstrated that U and Pu were homogeneously distributed throughout the particles, indicating that U and Pu have been fused. Furthermore, mu-XANES showed that U and Pu in the particles were present as mixed oxides. U was found to be in oxidation state IV whereas Pu apparently is a mixture of Pu(III) and Pu(IV). As previous assessments are based on PuO2 only, revisions should be made, taking Pu(III) into account. PMID:15748658

  12. Development of A595 Explosion-Resistant Container Design. Numerical, Theoretical and Experimental Justification of the Container Design Parameters

    SciTech Connect

    Abakumov, A. I.; Devyatkin, I. V.; Meltsas, V. Yu.; Mikhailov, A. L.; Portnyagina, G. F.; Rusak, V. N.; Solovyev, V. P.; Syrunin, M. A.; Treshalin, S. M.; Fedorenko, A. G.

    2006-08-03

    The paper presents the results of numerical and experimental study on the AT595 metal-composite container designed in VNIIEF within the framework of international collaboration with SNL (USA). This container must completely contain products of an 8-kg-TNT detonation cased in 35 kg of inert surrounding material. Numerical and theoretical studies have been carried out of the containment capacity and fracture of small-scale open cylinder test units and container pressure vessel models subjected to different levels of specific explosive load (beneath, equal to and above the required design load defined for this container), and two AT595 containers have been tested for the design load and a higher load.

  13. Analysis of an explosion accident of nitrogen trichloride in a waste liquid containing ammonium ion and platinum black.

    PubMed

    Okada, Ken; Akiyoshi, Miyako; Ishizaki, Keiko; Sato, Hiroyasu; Matsunaga, Takehiro

    2014-08-15

    Five liters of sodium hypochlorite aqueous solution (12 mass%) was poured into 300 L of liquid waste containing ammonium ion of about 1.8 mol/L in a 500 L tank in a plant area; then, two minutes later the solution exploded with a flash on March 30th, 2005. The tank cover, the fluorescent lamp and the air duct were broken by the blast wave. Thus, we have conducted 40 runs of laboratory-scale explosion tests under various conditions (solution concentrations of (NH4)2SO4 and NaClO, temperatures, Pt catalysts, pH, etc.) to investigate the causes for such an explosion. When solutions of ammonium sulfate and sodium hypochlorite are mixed in the presence of platinum black, explosions result. This is ascribable to the formation of explosive nitrogen trichloride (NCl3). In the case where it is necessary to mix these 2 solutions (ammonium sulfate and sodium hypochlorite) in the presence of platinum black, the following conditions would reduce a probability of explosion; the initial concentration of NH4(+) should be less than 3 mol/L and the pH should be higher than 6. The hypochlorite solution (in 1/10 in volume) to be added at room temperature is recommended to be less than 0.6 mol/L. PMID:24953938

  14. Rheological, physical, and sensory attributes of gluten-free rice cakes containing resistant starch.

    PubMed

    Tsatsaragkou, Kleopatra; Papantoniou, Maria; Mandala, Ioanna

    2015-02-01

    In this study the effect of resistant starch (RS) addition on gluten-free cakes from rice flour and tapioca starch physical and sensorial properties was investigated. Increase in RS concentration made cake batters less elastic (drop of G'(ω), G''(ω) values) and thinner (viscosity decreased). Cakes specific volume increased with an increase in RS level and was maximized for 15 g/100 g RS, although porosity values were significantly unaffected by RS content. Crumb grain analysis exhibited a decrease in surface porosity, number of pores and an increase in average pore diameter as RS concentration increased. During storage, cake crumb remained softer in formulations with increasing amounts of RS. Sensory evaluation of cakes demonstrated the acceptance of all formulations, with cake containing 20 g/100 g RS mostly preferred. Gluten-free cakes with improved quality characteristics and high nutritional value can be manufactured by the incorporation of RS. PMID:25604540

  15. Phosphate-Containing Polyethylene Glycol Polymers Prevent Lethal Sepsis by Multidrug-Resistant Pathogens

    PubMed Central

    Zaborin, Alexander; Defazio, Jennifer R.; Kade, Matthew; Kaiser, Brooke L. Deatherage; Belogortseva, Natalia; Camp, David G.; Smith, Richard D.; Adkins, Joshua N.; Kim, Sangman M.; Alverdy, Alexandria; Goldfeld, David; Firestone, Millicent A.; Collier, Joel H.; Jabri, Bana; Tirrell, Matthew

    2014-01-01

    Antibiotic resistance among highly pathogenic strains of bacteria and fungi is a growing concern in the face of the ability to sustain life during critical illness with advancing medical interventions. The longer patients remain critically ill, the more likely they are to become colonized by multidrug-resistant (MDR) pathogens. The human gastrointestinal tract is the primary site of colonization of many MDR pathogens and is a major source of life-threatening infections due to these microorganisms. Eradication measures to sterilize the gut are difficult if not impossible and carry the risk of further antibiotic resistance. Here, we present a strategy to contain rather than eliminate MDR pathogens by using an agent that interferes with the ability of colonizing pathogens to express virulence in response to host-derived and local environmental factors. The antivirulence agent is a phosphorylated triblock high-molecular-weight polymer (here termed Pi-PEG 15–20) that exploits the known properties of phosphate (Pi) and polyethylene glycol 15-20 (PEG 15-20) to suppress microbial virulence and protect the integrity of the intestinal epithelium. The compound is nonmicrobiocidal and appears to be highly effective when tested both in vitro and in vivo. Structure functional analyses suggest that the hydrophobic bis-aromatic moiety at the polymer center is of particular importance to the biological function of Pi-PEG 15-20, beyond its phosphate content. Animal studies demonstrate that Pi-PEG prevents mortality in mice inoculated with multiple highly virulent pathogenic organisms from hospitalized patients in association with preservation of the core microbiome. PMID:24277029

  16. Structure and corrosion resistance of nickel coatings containing tungsten and silicon powders

    SciTech Connect

    Popczyk, Magdalena . E-mail: mpopczyk@us.edu.pl; Budniok, Antoni; Lagiewka, Eugeniusz

    2007-04-15

    Ni + W + Si coatings were prepared by nickel deposition from a bath containing a suspension of tungsten and silicon powders. These coatings were obtained at galvanostatic conditions, at the current density of j {sub dep} = - 0.100 A cm{sup -2} and at the temperature of 338 K. For determination of the influence of phase composition and surface morphology of these coatings on changes in the corrosion resistance, these coatings were modified in an argon atmosphere by thermal treatment at 1373 K during 1 h. A scanning electron microscope was used for surface morphology characterization of the coatings. The chemical composition of the coatings was determined by EDS and phase composition investigations were conducted by X-ray diffraction. It was found that the as-deposited coatings consist of a three-phase structure, i.e., nickel, tungsten and silicon. The phase composition for the Ni + W + Si coatings after thermal treatment is markedly different. The main peaks corresponding to Ni and W coexist with the new phases: NiW, NiWSi and a solid solution of W in Ni. Electrochemical corrosion resistance investigations were carried out in 5 M KOH, using potentiodynamic and electrochemical impedance spectroscopy (EIS) methods. On the basis of these investigations it was found that the Ni + W + Si coatings after thermal treatment are more corrosion resistant in alkaline solution than the as-deposited coatings. The reasons for this are a reduction in the amount of free nickel and tungsten, the presence of new phases (in particular polymetallic silicides), and a decrease of the active surface area of the coatings after thermal treatment.

  17. Factors affecting the thermal shock resistance of several hafnia based composites containing graphite or tungsten. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Lineback, L. D.

    1974-01-01

    The thermal shock resistance of hafnia based composites containing graphite powder or tungsten fibers was investigated in terms of material properties which include thermal expansion, thermal conductivity, compressive fracture stress, modulus of elasticity, and phase stability in terms of the processing parameters of hot pressing pressure and/or density, degree of stabilization of the hafnia, and composition. All other parameters were held constant or assumed constant. The thermal shock resistance was directly proportional to the compressive fracture stress to modulus of elasticity ratio and was not affected appreciably by the small thermal expansion or thermal conductivity changes. This ratio was found to vary strongly with the composition and density such that the composites containing graphite had relatively poor thermal shock resistance, while the composites containing tungsten had superior thermal shock resistance.

  18. Ship trim optimization: assessment of influence of trim on resistance of MOERI container ship.

    PubMed

    Sherbaz, Salma; Duan, Wenyang

    2014-01-01

    Environmental issues and rising fuel prices necessitate better energy efficiency in all sectors. Shipping industry is a stakeholder in environmental issues. Shipping industry is responsible for approximately 3% of global CO₂ emissions, 14-15% of global NO(X) emissions, and 16% of global SO(X) emissions. Ship trim optimization has gained enormous momentum in recent years being an effective operational measure for better energy efficiency to reduce emissions. Ship trim optimization analysis has traditionally been done through tow-tank testing for a specific hullform. Computational techniques are increasingly popular in ship hydrodynamics applications. The purpose of this study is to present MOERI container ship (KCS) hull trim optimization by employing computational methods. KCS hull total resistances and trim and sinkage computed values, in even keel condition, are compared with experimental values and found in reasonable agreement. The agreement validates that mesh, boundary conditions, and solution techniques are correct. The same mesh, boundary conditions, and solution techniques are used to obtain resistance values in different trim conditions at Fn = 0.2274. Based on attained results, optimum trim is suggested. This research serves as foundation for employing computational techniques for ship trim optimization. PMID:24578649

  19. Ship Trim Optimization: Assessment of Influence of Trim on Resistance of MOERI Container Ship

    PubMed Central

    Duan, Wenyang

    2014-01-01

    Environmental issues and rising fuel prices necessitate better energy efficiency in all sectors. Shipping industry is a stakeholder in environmental issues. Shipping industry is responsible for approximately 3% of global CO2 emissions, 14-15% of global NOX emissions, and 16% of global SOX emissions. Ship trim optimization has gained enormous momentum in recent years being an effective operational measure for better energy efficiency to reduce emissions. Ship trim optimization analysis has traditionally been done through tow-tank testing for a specific hullform. Computational techniques are increasingly popular in ship hydrodynamics applications. The purpose of this study is to present MOERI container ship (KCS) hull trim optimization by employing computational methods. KCS hull total resistances and trim and sinkage computed values, in even keel condition, are compared with experimental values and found in reasonable agreement. The agreement validates that mesh, boundary conditions, and solution techniques are correct. The same mesh, boundary conditions, and solution techniques are used to obtain resistance values in different trim conditions at Fn = 0.2274. Based on attained results, optimum trim is suggested. This research serves as foundation for employing computational techniques for ship trim optimization. PMID:24578649

  20. Ceramic Coatings for Corrosion Resistant Nuclear Waste Container Evaluated in Simulated Ground Water at 90?C

    SciTech Connect

    Haslam, J J; Farmer, J C

    2004-03-31

    Ceramic materials have been considered as corrosion resistant coatings for nuclear waste containers. Their suitability can be derived from the fully oxidized state for selected metal oxides. Several types of ceramic coatings applied to plain carbon steel substrates by thermal spray techniques have been exposed to 90 C simulated ground water for nearly 6 years. In some cases no apparent macroscopic damage such as coating spallation was observed in coatings. Thermal spray processes examined in this work included plasma spray, High Velocity Oxy Fuel (HVOF), and Detonation Gun. Some thermal spray coatings have demonstrated superior corrosion protection for the plain carbon steel substrate. In particular the HVOF and Detonation Gun thermal spray processes produced coatings with low connected porosity, which limited the growth rate of corrosion products. It was also demonstrated that these coatings resisted spallation of the coating even when an intentional flaw (which allowed for corrosion of the carbon steel substrate underneath the ceramic coating) was placed in the coating. A model for prediction of the corrosion protection provided by ceramic coatings is presented. The model includes the effect of the morphology and amount of the porosity within the thermal spray coating and provides a prediction of the exposure time needed to produce a crack in the ceramic coating.

  1. Impact resistance of lightweight hybrid structures for gas turbine engine fan containment applications

    NASA Astrophysics Data System (ADS)

    Hebsur, Mohan G.; Noebe, Ronald D.; Revilock, Duane M.

    2003-08-01

    The ballistic impact resistance of hybrid composite sandwich structures was evaluated with the ultimate goal of developing new materials or structures for potential gas turbine engine, fan containment applications. The sandwich structures investigated consisted of GLARE-5 (Aviation Equipment, Inc., Costa Mesa, CA) laminates as face sheets with lightweight cellular metallic materials such as honeycomb, foam, and lattice block as a core material. The impact resistance of these hybrid sandwich structures was compared with GLARE-5 laminates and 2024-T3 Al sheets, which were tested as a function of areal weight (material thickness). The GLARE-5 laminates exhibited comparable impact properties to that of 2024-T3 Al at low areal weights, even though there were significant differences in the static tensile properties of these materials. The GLARE-5, however, did have a greater ballistic limit than straight aluminum sheet at higher areal weights. Furthermore, there is up to a 25% advantage in ballistic limit for the GLARE-5/foam sandwich structures compared with straight 2024-T3 Al. But no advantage in ballistic limit was observed between any of the hybrid sandwich structures and thicker versions of GLARE-5. Recommendations for future work are provided, based on these preliminary data.

  2. Impact Resistance of Lightweight Hybrid Structures for Gas Turbine Engine Fan Containment Applications

    NASA Technical Reports Server (NTRS)

    Hebsur, Mohan G.; Noebe, Ronald D.; Revilock, Duane M.

    2003-01-01

    The ballistic impact resistance of hybrid composite sandwich structures was evaluated with the ultimate goal of developing new materials or structures for potential gas turbine engine fan containment applications. The sandwich structures investigated consisted of GLARE-5 laminates as face sheets with lightweight cellular metallic materials such as honeycomb, foam, and lattice block as a core material. The impact resistance of these hybrid sandwich structures was compared to GLARE-5 laminates and 2024-T3 Al sheet, which were tested as a function of areal weight (material thickness). The GLARE-5 laminates exhibited comparable impact properties to that of 2024-T3 Al at low areal weights, even though there were significant differences in the static tensile properties of these materials. The GLARE-5, however, did have a greater ballistic limit than straight aluminum sheet at higher areal weights. Furthermore, there is up to a 25% advantage in ballistic limit for the GLARE-5/foam sandwich structures compared to straight 2024-T3 Al. But no advantage in ballistic limit was observed between any of the hybrid sandwich structures and thicker versions of GLARE-5. Recommendations for future work are provided, based on these preliminary data.

  3. Halogen-Containing Gases as Boundary Lubricants for Corrosion-Resistant Alloys at 1200 F

    NASA Technical Reports Server (NTRS)

    Buckley, Donald H.; Johnson, Robert L.

    1959-01-01

    The extreme temperatures anticipated for lubricated parts in advanced flight powerplants dictate the consideration of unconventional methods of lubrication such as solid lubricants and the reactive gases described in the present research. These halogen-containing "reactive" gases such as dichlorodifluoromethane, CF2Cl2, are among the most stable of organic molecules. The high "flash" temperatures generated at the contacting asperities as a result of frictional heat are sufficient to cause local decomposition of the halogen-containing gases. The active atoms thus released (e.g., chlorine) then react with the metal to be lubricated to form halides capable of effective lubrication. The presence of small amounts of a sulfur-containing gas (e.g., 1 percent sulfur hexafluoride, SF6) was found to catalyze the formation of metal halides. Friction and wear studies were made with a hemisphere (3/16-in. rad.) rider sliding in a circumferential path on the flat surface of a rotating disk (2 1/2-in. diam.). The specimens of corrosion-resistant 2 alloys were run in an atmosphere of the various gases with a load of 1200 grams, a sliding velocity of 120 feet per minute, and temperature from 75 to 1200 F. An effective lubricant for ferritic materials (M-1 tool steel) was CF2Cl2, but significant corrosion occurred above 600 F. Corrosion evaluation in CF2Cl2 suggested a number of nickel- and cobalt-base alloys for additional lubrication study. Several combinations of gases and these metals were found to lubricate to 1200 F without excessive corrosion. The gases were CF2Cl2 Plus 1 percent SF6, monobromotrifluoromethane CF3Br plus 1 percent SF6, dibromodifluoromethane CF2Br2, iodotrifluoromethane, CF3I, and I2. Careful selection of metals and gas are necessary for successful lubrication over specific temperature ranges. Optimum combinations give friction coefficients as low as 0.05 without

  4. Accident investigation

    NASA Technical Reports Server (NTRS)

    Laynor, William G. Bud

    1987-01-01

    The National Transportation Safety Board (NTSB) has attributed wind shear as a cause or contributing factor in 15 accidents involving transport-categroy airplanes since 1970. Nine of these were nonfatal; but the other six accounted for 440 lives. Five of the fatal accidents and seven of the nonfatal accidents involved encounters with convective downbursts or microbursts. Of other accidents, two which were nonfatal were encounters with a frontal system shear, and one which was fatal was the result of a terrain induced wind shear. These accidents are discussed with reference to helping the aircraft to avoid the wind shear or if impossible to help the pilot to get through the wind shear.

  5. Abrasion and fatigue resistance of PDMS containing multiblock polyurethanes after accelerated water exposure at elevated temperature.

    PubMed

    Chaffin, Kimberly A; Wilson, Charles L; Himes, Adam K; Dawson, James W; Haddad, Tarek D; Buckalew, Adam J; Miller, Jennifer P; Untereker, Darrel F; Simha, Narendra K

    2013-11-01

    Segmented polyurethane multiblock polymers containing polydimethylsiloxane and polyether soft segments form tough and easily processed thermoplastic elastomers (PDMS-urethanes). Two commercially available examples, PurSil 35 (denoted as P35) and Elast-Eon E2A (denoted as E2A), were evaluated for abrasion and fatigue resistance after immersion in 85 °C buffered water for up to 80 weeks. We previously reported that water exposure in these experiments resulted in a molar mass reduction, where the kinetics of the hydrolysis reaction is supported by a straight forward Arrhenius analysis over a range of accelerated temperatures (37-85 °C). We also showed that the ultimate tensile properties of P35 and E2A were significantly compromised when the molar mass was reduced. Here, we show that the reduction in molar mass also correlated with a reduction in both the abrasion and fatigue resistance. The instantaneous wear rate of both P35 and E2A, when exposed to the reciprocating motion of an ethylene tetrafluoroethylene (ETFE) jacketed cable, increased with the inverse of the number averaged molar mass (1/Mn). Both materials showed a change in the wear surface when the number-averaged molar mass was reduced to ≈ 16 kg/mole, where a smooth wear surface transitioned to a 'spalling-like' pattern, leaving the wear surface with ≈ 0.3 mm cracks that propagated beyond the contact surface. The fatigue crack growth rate for P35 and E2A also increased in proportion to 1/Mn, after the molar mass was reduced below a critical value of ≈30 kg/mole. Interestingly, this critical molar mass coincided with that at which the single cycle stress-strain response changed from strain hardening to strain softening. The changes in both abrasion and fatigue resistance, key predictors for long term reliability of cardiac leads, after exposure of this class of PDMS-urethanes to water suggests that these materials are susceptible to mechanical compromise in vivo. PMID:23871543

  6. Studies of Corrosion Resistant Materials Being Considered for High-Level Nuclear Waste Containment in Yucca Mountain Relevant Environments

    SciTech Connect

    McCright, R.D.; Ilevbare, G.; Estill, J.; Rebak, R.

    2001-12-09

    Containment of spent nuclear fuel and vitrified forms of high level nuclear waste require use of materials that are highly corrosion resistant to all of the anticipated environmental scenarios that can occur in a geological repository. Ni-Cr-Mo Alloy 22 (UNS N60622) is proposed for the corrosion resistant outer barrier of a two-layer waste package container at the potential repository site at Yucca Mountain. A range of water compositions that may contact the outer barrier is under consideration, and a testing program is underway to characterize the forms of corrosion and to quantify the corrosion rates. Results from the testing support models for long term prediction of the performance of the container. Results obtained to date indicate a very low general corrosion rate for Alloy 22 and very high resistance to all forms of localized and environmentally assisted cracking in environments tested to date.

  7. Microstructure of a Creep-Resistant 10 Pct Chromium Steel Containing 250 ppm Boron

    NASA Astrophysics Data System (ADS)

    Golpayegani, Ardeshir; Liu, Fang; Svensson, Henrik; Andersson, Marcus; Andrén, Hans-Olof

    2011-04-01

    The microstructure of a trial martensitic chromium steel containing a high content of boron (250 ppm) was characterized in detail in the as-tempered and aged conditions. This steel has a similar composition and heat treatment as the TAF steel that still is unsurpassed in creep strength among all 9 to 12 pct chromium steels. Characterization was performed by using scanning electron microscopy, energy-filtered transmission electron microscopy, secondary ion mass spectroscopy, and atom probe tomography. Focus was placed on investigating different types of precipitates that play a key role in improving the creep resistance of these steels. The low tempering temperature of 963 K (690 °C) is enough for the precipitation of the full volume fraction of both MX and M23C6. A high boron content, more than 1 at. pct, was found in M23C6 precipitates and they grow slowly during aging. The high boron level in the steel results in metal borides rather than BN with the approximate formula (Mo0.66Cr0.34)2(Fe0.75V0.25)B2. Two families of MX precipitates were found, one at lath boundaries about 35 nm in size and one dense inside the laths, only 5 to 15 nm in size.

  8. Resistance of nitrogen-containing stainless alloys to corrosion in chloride media

    SciTech Connect

    Bandy, R.; van Rooyen, D.

    1982-01-01

    The pitting resistance of a series of experimental stainless steels with varying amounts of nickel, chromium, molybdenum, manganese and nitrogen and a number of commercial stainless steels and nickel based alloys has been studied in highly concentrated chloride media. The results show that nitrogen enhances the pitting resistance of stainless steel and exceptional corrosion resistance is achieved with high levels of nitrogen in combination with suitable amounts of molybdenum and chromium.

  9. Mechanisms of cinnamon extract-induced suppression of the overproduction of apolipoprotein B48-containing lipoproteins in insulin resistance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Metabolic dyslipidemia is a common feature of insulin resistant states and is associated with aberrant metabolism of apoB-containing lipoprotein particles produced by not only the liver but also the small intestine. We have reported previously that an aqueous extract from cinnamon (CE) improves high...

  10. Growth Responses and Resistance to Streptococccus iniae of Nile Tilapia, Oreochromis niloticus Fed Diets Containing Distiller's Dried Grains with Solubles

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study was conducted to evaluate the effect of dietary levels of distiller’s dried grains with solubles (DDGS) on growth performance, body composition, hematology, immune response and resistance of Nile tilapia to Streptococcus iniae challenge. Five isocaloric diets containing DDGS at levels of ...

  11. LONG-TERM STARVATION-INDUCED LOSS OF APPARENT ANTIBIOTIC RESISTANCE IN CELLS CONTAINING THE PLASMID PSA

    EPA Science Inventory

    Escherichia coli, Pseudomonas fluorescens, and a Pseudomonas sp. strain 133B containing the pSa plasmid were starved in well water for up to 523 days. There were two patterns of apparent antibiotic resistance loss observed. In Pseudomonas sp. strain 133B, there was no apparent lo...

  12. Growth Responses and Resistance to Streptococcus iniae of Nile Tilapia, Oreochromis niloticus, Fed Diets Containing Distiller's Dried Grains with Solubles

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study was conducted to evaluate the effect of dietary levels of distiller’s dried grains with solubles (DDGS) on growth performance, body composition, hematology, immune response and resistance of Nile tilapia to Streptococcus iniae challenge. Five isocaloric diets containing DDGS at levels of ...

  13. GROWTH RESPONSE AND RESISTANCE TO STREPTOCOCCUS INIAE OF NILE TILAPIA (OREOCHROMIS NILOTICUS) FED DIETS CONTAINING DISTILLER'S DRIED GRAINS WITH SOLUBLES

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study was conducted to evaluate the effect of dietary levels of distiller’s dried grains with solubles (DDGS) on growth performance, body composition, hematology, immune response and resistance of Nile tilapia to Streptococcus iniae challenge. Five isocaloric diets containing DDGS at levels of ...

  14. Identification of an integron containing the quinolone resistance gene qnrA1 in Shewanella xiamenensis.

    PubMed

    Zhao, Jing-yi; Mu, Xiao-dong; Zhu, Yuan-qi; Xi, Lijun; Xiao, Zijun

    2015-09-01

    This study investigated multidrug resistance in Shewanella xiamenensis isolated from an estuarine water sample in China during 2014. This strain displayed resistance or decreased susceptibility to ampicillin, aztreonam, cefepime, cefotaxime, chloramphenicol, ciprofloxacin, erythromycin, kanamycin and trimethoprim-sulfamethoxazole. The antimicrobial resistance genes aacA3, blaOXA-199, qnrA1 and sul1 were identified by PCR amplification and by sequencing. Pulsed-field gel electrophoresis and DNA hybridization experiments showed that the quinolone resistance gene qnrA1 was chromosomally located. qnrA1 was located in a complex class 1 integron, downstream from an ISCR1, and bracketed by two copies of qacEΔ1-sul1 genes. This integron is similar to In825 with four gene cassettes aacA3, catB11c, dfrA1z and aadA2az. An IS26-mel-mph2-IS26 structure was also detected in the flanking sequences, conferring resistance to macrolides. This is the first identification of the class 1 integron in S. xiamenensis. This is also the first identification of the qnrA1 gene and IS26-mediated macrolide resistance genes in S. xiamenensis. Presence of a variety of resistance genetic determinants in environmental S. xiamenensis suggests the possibility that this species may serve as a potential vehicle of antimicrobial resistance genes in aquatic environments. PMID:26316545

  15. Polymeric Coatings Containing Antioxidants to Improve UV- and Heat Resistance of Chrome-Free Leather

    Technology Transfer Automated Retrieval System (TEKTRAN)

    For automotive upholstery leather, UV and heat resistance are very important qualities, particularly for non-chrome-tanned (chrome-free) leather. One of our research endeavors has focused on an environmentally friendly finishing process that will improve the UV and heat resistance of automobile uph...

  16. Environmental Considerations in the Studies of Corrosion Resistant Alloys for High-Level Radioactive Waste Containment

    SciTech Connect

    Ilevbare, G O; Lian, T; Farmer, J C

    2001-11-26

    The corrosion resistance of Alloy 22 (UNS No.: N06022) was studied in simulated ground water of different pH values and ionic contents at various temperatures. Potentiodynamic polarization techniques were used to study the electrochemical behavior and measure the critical potentials in the various systems. Alloy 22 was found to be resistant to localized corrosion in the simulated ground waters tested.

  17. Overcoming multidrug resistance in Dox-resistant neuroblastoma cell lines via treatment with HPMA copolymer conjugates containing anthracyclines and P-gp inhibitors.

    PubMed

    Koziolová, Eva; Janoušková, Olga; Cuchalová, Lucie; Hvězdová, Zuzana; Hraběta, Jan; Eckschlager, Tomáš; Sivák, Ladislav; Ulbrich, Karel; Etrych, Tomáš; Šubr, Vladimír

    2016-07-10

    Water-soluble N-(2-hydroxypropyl)methacrylamide copolymer conjugates bearing the anticancer drugs doxorubicin (Dox) or pirarubicin (THP), P-gp inhibitors derived from reversin 121 (REV) or ritonavir (RIT)), or both anticancer drug and P-gp inhibitor were designed and synthesized. All biologically active molecules were attached to the polymer carrier via pH-sensitive spacer enabling controlled release in mild acidic environment modeling endosomes and lysosomes of tumor cells. The cytotoxicity of the conjugates against three sensitive and Dox-resistant neuroblastoma (NB) cell lines, applied alone or in combination, was studied in vitro. All conjugates containing THP displayed higher cytotoxicity against all three Dox-resistant NB cell lines compared with the corresponding Dox-containing conjugates. Furthermore, the cytotoxicity of conjugates containing both drug and P-gp inhibitor was up to 10 times higher than that of the conjugate containing only drug. In general, the polymer-drug conjugates showed higher cytotoxicity when conjugates containing inhibitors were added 8 or 16h prior to treatment compared with conjugates bearing both the inhibitor and the drug. The difference in cytotoxicity was more pronounced at the 16-h time point. Moreover, higher inhibitor:drug ratios resulted in higher cytotoxicity. The cytotoxicity of the polymer-drug used in combination with polymer P-gp inhibitor was up to 84 times higher than that of the polymer-drug alone. PMID:27189135

  18. Accident management information needs

    SciTech Connect

    Hanson, D.J.; Ward, L.W.; Nelson, W.R.; Meyer, O.R. )

    1990-04-01

    In support of the US Nuclear Regulatory Commission (NRC) Accident Management Research Program, a methodology has been developed for identifying the plant information needs necessary for personnel involved in the management of an accident to diagnose that an accident is in progress, select and implement strategies to prevent or mitigate the accident, and monitor the effectiveness of these strategies. This report describes the methodology and presents an application of this methodology to a Pressurized Water Reactor (PWR) with a large dry containment. A risk-important severe accident sequence for a PWR is used to examine the capability of the existing measurements to supply the necessary information. The method includes an assessment of the effects of the sequence on the measurement availability including the effects of environmental conditions. The information needs and capabilities identified using this approach are also intended to form the basis for more comprehensive information needs assessment performed during the analyses and development of specific strategies for use in accident management prevention and mitigation. 3 refs., 16 figs., 7 tabs.

  19. The First Global Forum on Bacterial Infections calls for urgent action to contain antibiotic resistance.

    PubMed

    Vlieghe, Erika

    2012-02-01

    The 1st Global Forum on Bacterial Infections: Balancing Treatment Access and Antibiotic Resistance was organized by the Center for Disease Dynamics, Economics and Policy and the Public Health Foundation of India for researchers, policymakers, clinicians and public health program managers dealing with the problems of bacterial infection and antibiotic resistance in low- and middle-income countries. This meeting was the first gathering of its kind to be held in a developing country. PMID:22339188

  20. Nanofabrication of high aspect ratio structures using an evaporated resist containing metal

    NASA Astrophysics Data System (ADS)

    Con, Celal; Zhang, Jian; Cui, Bo

    2014-05-01

    Organic electron beam resists are typically not resistant to the plasma etching employed to transfer the pattern into the underlying layer. Here, the authors present the incorporation of a metal hard mask material into negative resist polystyrene by co-evaporation of the polystyrene and the metal onto a substrate. With a volume ratio of 1:15 between Cr and polystyrene, this nanocomposite resist showed an etching selectivity to silicon one order higher than pure polystyrene resist. Silicon structures of 100 nm width and 3.5 μm height (aspect ratio 1:35) were obtained using a non-switching deep silicon etching recipe with SF6 and C4F8 gas. Moreover, unlike the common spin coating method, evaporated nanocomposite resist can be coated onto irregular and non-flat surfaces such as optical fibers and AFM cantilevers. As a proof of concept, we fabricated high aspect ratio structures on top of an AFM cantilever. Nanofabrication on non-flat surfaces may find applications in the fields of (AFM) tip enhanced Raman spectroscopy for chemical analysis and lab-on-fiber technology.

  1. Nanofabrication of high aspect ratio structures using an evaporated resist containing metal.

    PubMed

    Con, Celal; Zhang, Jian; Cui, Bo

    2014-05-01

    Organic electron beam resists are typically not resistant to the plasma etching employed to transfer the pattern into the underlying layer. Here, the authors present the incorporation of a metal hard mask material into negative resist polystyrene by co-evaporation of the polystyrene and the metal onto a substrate. With a volume ratio of 1:15 between Cr and polystyrene, this nanocomposite resist showed an etching selectivity to silicon one order higher than pure polystyrene resist. Silicon structures of 100 nm width and 3.5 μm height (aspect ratio 1:35) were obtained using a non-switching deep silicon etching recipe with SF6 and C4F8 gas. Moreover, unlike the common spin coating method, evaporated nanocomposite resist can be coated onto irregular and non-flat surfaces such as optical fibers and AFM cantilevers. As a proof of concept, we fabricated high aspect ratio structures on top of an AFM cantilever. Nanofabrication on non-flat surfaces may find applications in the fields of (AFM) tip enhanced Raman spectroscopy for chemical analysis and lab-on-fiber technology. PMID:24717720

  2. Durable field resistance to wheat yellow mosaic virus in transgenic wheat containing the antisense virus polymerase gene.

    PubMed

    Chen, Ming; Sun, Liying; Wu, Hongya; Chen, Jiong; Ma, Youzhi; Zhang, Xiaoxiang; Du, Lipu; Cheng, Shunhe; Zhang, Boqiao; Ye, Xingguo; Pang, Junlan; Zhang, Xinmei; Li, Liancheng; Andika, Ida B; Chen, Jianping; Xu, Huijun

    2014-05-01

    Wheat yellow mosaic virus (WYMV) has spread rapidly and causes serious yield losses in the major wheat-growing areas in China. Because it is vectored by the fungus-like organism Polymyxa graminis that survives for long periods in soil, it is difficult to eliminate by conventional crop management or fungicides. There is also only limited resistance in commercial cultivars. In this research, fourteen independent transgenic events were obtained by co-transformation with the antisense NIb8 gene (the NIb replicase of WYMV) and a selectable gene bar. Four original transgenic lines (N12, N13, N14 and N15) and an offspring line (N12-1) showed high and durable resistance to WYMV in the field. Four resistant lines were shown to have segregated and only contain NIb8 (without bar) by PCR and herbicide resistance testing in the later generations. Line N12-1 showed broad-spectrum resistance to WYMV isolates from different sites in China. After growing in the infested soil, WYMV could not be detected by tissue printing and Western blot assays of transgenic wheat. The grain yield of transgenic wheat was about 10% greater than the wild-type susceptible control. Northern blot and small RNA deep sequencing analyses showed that there was no accumulation of small interfering RNAs targeting the NIb8 gene in transgenic wheat plants, suggesting that transgene RNA silencing, a common mechanism of virus-derived disease resistance, is not involved in the process of WYMV resistance. This durable and broad-spectrum resistance to WYMV in transgenic wheat will be useful for alleviating the damage caused by WYMV. PMID:24373454

  3. Three dimensional calculations of the effective Kapitza resistance of UO2 grain boundaries containing intergranular bubbles

    NASA Astrophysics Data System (ADS)

    Millett, Paul C.; Tonks, Michael R.; Chockalingam, K.; Zhang, Yongfeng; Biner, S. B.

    2013-08-01

    A parametric study has been performed that quantifies the effective change in grain boundary Kapitza resistance due to the presence of intergranular bubbles. The steady-state heat conduction equation was solved in three-dimensional space using INL's MOOSE finite element software, with which spacial mesh adaptivity was used to resolve interfacial widths down to several nanometers while investigating bubble sizes up to a micrometer. Three critical parameters were systematically varied: the intergranular bubble radius, the fractional grain boundary bubble coverage, and the Kapitza resistance of the intact grain boundary. Using the simulation results, a mathematical model dependent on each of these parameters was developed to describe the effective Kapitza resistance. Furthermore, we illustrate how this model can be implemented in a fuel performance code to predict the temperature profile of a cylindrical fuel pellet.

  4. Fluid power engineering with fire resistant hydraulic fluids: Experiences with water-containing hydraulic fluids

    SciTech Connect

    Reichel, J.

    1994-12-01

    Water-based hydraulic fluids belong to the category of fire-resistant hydraulic fluids. For better fire protection, they are used instead of easily inflammable mineral oil based fluids in zones exposed to fire risks. For reasons of human health and operational safety, fire-resistant fluids have been compulsory in the hard coal mining industry of the European Community for more than 28 years. From the early sixties onward, testing specifications and methods were always updated for keeping pace with the actual state of technology, and recently, the seventh revised version was issued in the Luxembourg Reports (1) in 1993. As a consequence of the number of environmental catastrophes and the ban of polychlorinated biphenyls (PCB) (2) environmental compatibility testing was introduced within the framework of the European harmonization efforts for fire-resistant hydraulic fluids in 1990. However, predominantly national regulations are still in force. 7 figs., 2 tabs.

  5. 48 CFR 836.513 - Accident prevention.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Accident prevention. 836... prevention. The contracting officer must insert the clause at 852.236-87, Accident Prevention, in solicitations and contracts for construction that contain the clause at FAR 52.236-13, Accident Prevention....

  6. Loss of plasmids containing cloned inserts coding for novobiocin resistance or novobiocin sensitivity in Haemophilus influenzae.

    PubMed Central

    Setlow, J K; Spikes, D; Ledbetter, M

    1984-01-01

    Plasmids pNov1 and pNov1s , coding for resistance and sensitivity to novobiocin, respectively, were readily lost from wild-type Haemophilus influenzae but retained in a strain lacking an inducible defective prophage. The plasmid loss could be partly or wholly eliminated by a low-copy-number mutation in the plasmid or by the presence of certain antibiotic resistance markers in the host chromosome. Release of both phage HP1c1 , measured by plaque assay, and defective phage, measured by electron microscopy, was increased when the plasmids were present. The frequency of recombination between pNov1 and the chromosome, causing the plasmid to be converted to pNov1s , could under some circumstances be decreased from the normal 60 to 70% to below 10% by the presence of a kanamycin resistance marker in the chromosome. This suggested that a gene product coded for by the plasmid, the expression of which was affected by the kanamycin resistance marker, was responsible for the high recombination frequency. Evidence was obtained from in vitro experiments that the gene product was a gyrase. Images PMID:6327644

  7. New polymer for 157-nm single-layer resist based on fluorine-containing acryl copolymer

    NASA Astrophysics Data System (ADS)

    Ogata, Toshiyuki; Endo, Koutaro; Komano, Hiroshi; Nakayama, Toshimasa

    2001-08-01

    We are reporting on the development of acryl polymer based on novel methacrylate and acrylate monomers with various trifluoromethyl groups for the application to 157nm chemically amplified positive-tone resists. The (alpha) - trifluoromethylation of the alkyl ester in methacrylate or acrylate could employ the reduction of acrylpolymer absorbance at 157nm by spectra analysis with the VUV-200 spectrophotometer by JASCO. Although the trifluoromethyl groups could employ the reduction of base polymer absorbance at 157nm, the homopolymers have issued weak etch resistance as a photoresist base polymer. To take account of this issue, we have developed a novel monomer, trifluoromethyl- iso-adamantylmethacrylate (TFIAdMA) and a new co-polymer system with the combination of fluorinated methacrylate derivatives and substituted p-hydroxystyrene. The absorption coefficient of poly(p-tert-butoxystyren-co- hexafluoro-tert-butyl methacrylate-co-methacrylic acid) incicated to be less than 3 micrometers -1 at 157nm. Patterning results were obtained with a 157nm contact exposure system of VUVES-4500 by LTJ. One of the experimental resists, based on a particular polymer ratio and photo acid generator, has clearly achieved 180nm line and space pattern resolution. At 140nm resist film thickness, the sensitivity was 31 mJ/cm2 when using 0,26N tetrametylammonium hydroxide surfactant type developer.

  8. Extensively Drug-Resistant Pseudomonas aeruginosa Isolates Containing blaVIM-2 and Elements of Salmonella Genomic Island 2: a New Genetic Resistance Determinant in Northeast Ohio

    PubMed Central

    Perez, Federico; Hujer, Andrea M.; Marshall, Steven H.; Ray, Amy J.; Rather, Philip N.; Suwantarat, Nuntra; Dumford, Donald; O'Shea, Patrick; Domitrovic, T. Nicholas J.; Salata, Robert A.; Chavda, Kalyan D.; Chen, Liang; Kreiswirth, Barry N.; Vila, Alejandro J.; Haussler, Susanne; Jacobs, Michael R.

    2014-01-01

    Carbapenems are a mainstay of treatment for infections caused by Pseudomonas aeruginosa. Carbapenem resistance mediated by metallo-β-lactamases (MBLs) remains uncommon in the United States, despite the worldwide emergence of this group of enzymes. Between March 2012 and May 2013, we detected MBL-producing P. aeruginosa in a university-affiliated health care system in northeast Ohio. We examined the clinical characteristics and outcomes of patients, defined the resistance determinants and structure of the genetic element harboring the blaMBL gene through genome sequencing, and typed MBL-producing P. aeruginosa isolates using pulsed-field gel electrophoresis (PFGE), repetitive sequence-based PCR (rep-PCR), and multilocus sequence typing (MLST). Seven patients were affected that were hospitalized at three community hospitals, a long-term-care facility, and a tertiary care center; one of the patients died as a result of infection. Isolates belonged to sequence type 233 (ST233) and were extensively drug resistant (XDR), including resistance to all fluoroquinolones, aminoglycosides, and β-lactams; two isolates were nonsusceptible to colistin. The blaMBL gene was identified as blaVIM-2 contained within a class 1 integron (In559), similar to the cassette array previously detected in isolates from Norway, Russia, Taiwan, and Chicago, IL. Genomic sequencing and assembly revealed that In559 was part of a novel 35-kb region that also included a Tn501-like transposon and Salmonella genomic island 2 (SGI2)-homologous sequences. This analysis of XDR strains producing VIM-2 from northeast Ohio revealed a novel recombination event between Salmonella and P. aeruginosa, heralding a new antibiotic resistance threat in this region's health care system. PMID:25070102

  9. Electrical resistivity of some palladium-silver alloys containing hydrogen at 4.2 K

    NASA Technical Reports Server (NTRS)

    Smith, R. J.; Otterson, D. A.

    1974-01-01

    The electrical resistivities of the alloys 90at.%Pd - 10at.%Ag, 80at.%Pd - 20at.%Ag, 70at.%Pd - 30at.%Ag, 60at.%Pd - 40at.%Ag, and 50at.%Pd - 50at.%Ag were measured as functions of absorbed hydrogen x at 4.2 K. These results show a minimum in the resistivity for all the alloys except 90Pd-10Ag; they show a maximum for all the alloys except for 50Pd-Ag. We associate the shapes of the plots with a modification of the Pd D-band because of the substitutional alloying of Ag and the interstitial absorption of hydrogen.

  10. Liposome containing cinnamon oil with antibacterial activity against methicillin-resistant Staphylococcus aureus biofilm.

    PubMed

    Cui, Haiying; Li, Wei; Li, Changzhu; Vittayapadung, Saritporn; Lin, Lin

    2016-01-01

    The global burden of bacterial disease remains high and is set against a backdrop of increasing antimicrobial resistance. There is a pressing need for highly effective and natural antibacterial agents. In this work, the anti-biofilm effect of cinnamon oil on methicillin-resistant Staphylococcus aureus was evaluated. Then, cinnamon oil was encapsulated in liposomes to enhance its chemical stability. The anti-biofilm activities of the liposome-encapsulated cinnamon oil against MRSA biofilms on stainless steel, gauze, nylon membrane and non-woven fabrics were evaluated by colony forming unit determination. Scanning electron microscopy and laser scanning confocal microscopy analyses were employed to observe the morphological changes in MRSA biofilms treated with the encapsulated cinnamon oil. As a natural and safe spice, the cinnamon oil exhibited a satisfactory antibacterial performance on MRSA and its biofilms. The application of liposomes further improves the stability of antimicrobial agents and extends the action time. PMID:26838161

  11. Heat sealable, flame and abrasion resistant coated fabric. [clothing and containers for space exploration

    NASA Technical Reports Server (NTRS)

    Tschirch, R. P.; Sidman, K. R. (Inventor)

    1981-01-01

    Flame retardant, abrasion resistant elastomeric compositions are comprised of thermoplastic polyurethane polymer and flame retarding amounts of a filler selected from decabromodiphenyloxide and antimony oxide in a 3:1 weight ratio, and decabromodiphenyloxide, antimony oxide, and ammonium polyphosphate in a 3:1:3 weight ratio respectively. Coated fabrics employing such elastomeric compositions as coating film are flexible, lightweight, and air impermeable and can be made using heat or dielectric sealing procedures.

  12. Methylbenzene-Containing Polyketides from a Streptomyces that Spontaneously Acquired Rifampicin Resistance: Structural Elucidation and Biosynthesis.

    PubMed

    Thong, Wei Li; Shin-Ya, Kazuo; Nishiyama, Makoto; Kuzuyama, Tomohisa

    2016-04-22

    Conventional screening for novel bioactive compounds in actinomycetes often results in the rediscovery of known compounds. In contrast, recent genome sequencing revealed that most of the predicted gene clusters for secondary metabolisms are not expressed under standard cultivation conditions. To explore the potential metabolites produced by these gene clusters, we implemented a cryptic gene activation strategy by screening mutants that acquire resistance to rifampicin. The induction of rifampicin resistance in 11 actinomycete strains generated 164 rifampicin-resistant mutants (rif mutants). The comparison of the metabolic profiles between the rif mutants and their wild-type strains indicated that one mutant (TW-R50-13) overproduced an unidentified metabolite (1). During the isolation and structural elucidation of metabolite 1, an additional metabolite was found; both are unprecedented compounds featuring a C5N unit and a methylbenzene moiety. Of these partial structures, the biosynthesis of the latter has not been reported. A feeding experiment using (13)C-labeled precursors demonstrated that the methylbenzene moiety is most likely synthesized by the action of polyketide synthase. The gene deletion experiments revealed that the genes for the methylbenzene moiety are located at a different locus than the genes for the C5N unit. PMID:26905826

  13. Methods for detecting and locating leaks in containment facilities using electrical potential data and electrical resistance tomographic imaging techniques

    DOEpatents

    Daily, W.D.; Laine, D.L.; Laine, E.F.

    1997-08-26

    Methods are provided for detecting and locating leaks in liners used as barriers in the construction of landfills, surface impoundments, water reservoirs, tanks, and the like. Electrodes are placed in the ground around the periphery of the facility, in the leak detection zone located between two liners if present, and/or within the containment facility. Electrical resistivity data is collected using these electrodes. This data is used to map the electrical resistivity distribution beneath the containment liner between two liners in a double-lined facility. In an alternative embodiment, an electrode placed within the lined facility is driven to an electrical potential with respect to another electrode placed at a distance from the lined facility (mise-a-la-masse). Voltage differences are then measured between various combinations of additional electrodes placed in the soil on the periphery of the facility, the leak detection zone, or within the facility. A leak of liquid though the liner material will result in an electrical potential distribution that can be measured at the electrodes. The leak position is located by determining the coordinates of an electrical current source pole that best fits the measured potentials with the constraints of the known or assumed resistivity distribution. 6 figs.

  14. Methods for detecting and locating leaks in containment facilities using electrical potential data and electrical resistance tomographic imaging techniques

    DOEpatents

    Daily, William D.; Laine, Daren L.; Laine, Edwin F.

    2001-01-01

    Methods are provided for detecting and locating leaks in liners used as barriers in the construction of landfills, surface impoundments, water reservoirs, tanks, and the like. Electrodes are placed in the ground around the periphery of the facility, in the leak detection zone located between two liners if present, and/or within the containment facility. Electrical resistivity data is collected using these electrodes. This data is used to map the electrical resistivity distribution beneath the containment liner or between two liners in a double-lined facility. In an alternative embodiment, an electrode placed within the lined facility is driven to an electrical potential with respect to another electrode placed at a distance from the lined facility (mise-a-la-masse). Voltage differences are then measured between various combinations of additional electrodes placed in the soil on the periphery of the facility, the leak detection zone, or within the facility. A leak of liquid through the liner material will result in an electrical potential distribution that can be measured at the electrodes. The leak position is located by determining the coordinates of an electrical current source pole that best fits the measured potentials with the constraints of the known or assumed resistivity distribution.

  15. Methods for detecting and locating leaks in containment facilities using electrical potential data and electrical resistance tomographic imaging techniques

    DOEpatents

    Daily, William D.; Laine, Daren L.; Laine, Edwin F.

    1997-01-01

    Methods are provided for detecting and locating leaks in liners used as barriers in the construction of landfills, surface impoundments, water reservoirs, tanks, and the like. Electrodes are placed in the ground around the periphery of the facility, in the leak detection zone located between two liners if present, and/or within the containment facility. Electrical resistivity data is collected using these electrodes. This data is used to map the electrical resistivity distribution beneath the containment liner between two liners in a double-lined facility. In an alternative embodiment, an electrode placed within the lined facility is driven to an electrical potential with respect to another electrode placed at a distance from the lined facility (mise-a-la-masse). Voltage differences are then measured between various combinations of additional electrodes placed in the soil on the periphery of the facility, the leak detection zone, or within the facility. A leak of liquid though the liner material will result in an electrical potential distribution that can be measured at the electrodes. The leak position is located by determining the coordinates of an electrical current source pole that best fits the measured potentials with the constraints of the known or assumed resistivity distribution.

  16. Dual role of LRRC8A-containing transporters on cisplatin resistance in human ovarian cancer cells.

    PubMed

    Sørensen, Belinda Halling; Dam, Celina Støving; Stürup, Stefan; Lambert, Ian Henry

    2016-07-01

    Acquired resistance to chemotherapeutic drugs in cancer cells can reflect an ability to limit cellular drug availability, to repair drug induced DNA damage, and to limit initiation/progression of cell death (apoptosis). The leucine-rich-repeat-containing 8A (LRRC8A) protein is an essential component of volume sensitive channels for organic osmolytes (VSOAC) and volume regulated anion channels (VRAC), which are activated during the apoptotic process. Here we illustrate that cisplatin resistance in human ovarian cancer cells (A2780) correlates with a reduced expression of LRRC8A and copper transporter receptor 1 (CTR1), as well as a concomitant increased expression of copper-transporting P-type ATPases (ATP7A/ATP7B). We also find that cisplatin (Pt) accumulation correlates with LRRC8A protein expression and channel activity, i.e., the cellular Pt content is high when VSOAC is activated by depolarization of the plasma membrane or hypoosmotic cell swelling, and reduced when channel activity/LRRC8A expression is reduced by genetically silencing/pharmacological inhibition, or the cells have acquired a resistant phenotype with low LRRC8A protein expression. It is suggested that reduced LRRC8A expression in cisplatin-resistant A2780 cells ensures cell survival through limitation in cisplatin accumulation and a concomitant reduction in osmolytes loss via VSOAC/VRAC and hence instigation of the apoptotic process. PMID:27112899

  17. Development of a nanoscale precipitation-strengthened creep-resistant aluminum alloy containing trialuminide precipitates

    NASA Astrophysics Data System (ADS)

    Knipling, Keith Edward

    This research is toward developing a castable and heat-treatable precipitation-strengthened aluminum alloy exhibiting coarsening- and creep resistance at temperatures exceeding 400°C. Criteria for selecting alloying elements capable of producing such an alloy are established. Those systems forming Al3M trialuminide compounds with a cubic L12 crystal structure are favored, and based on a review of the existing literature, these are assessed in terms of solid-solubility and diffusivity in alpha-Al(satisfying the need for slow coarsening kinetics), and castability (which is discussed based on the binary phase diagrams). The first Group 3 element, Sc, and the second Group 4 element, Zr, are shown to be most promising. These expectations are confirmed by an initial study on the Al-Ti system, which demonstrates that conventionally-solidified alloys are not capable of precipitation strengthening. The Al-Zr system, by contrast, exhibits precipitation of nanometer-scale Al3Zr (L12) producing pronounced precipitation hardening when aged at 375, 400, or 425°C. The Al3 Zr precipitates are coarsening resistant and have the metastable L1 2 structure up to 500°C, a result of very sluggish diffusion of Zr in alpha-Al. Ternary additions of Ti are also investigated, forming Al 3(Zr1-xTix) (L12) precipitates with a reduced lattice parameter mismatch with alpha-Al, potentially improving the coarsening resistance. The composition of Al3(Zr1-xTi x) precipitates formed at 375 or 425°C are measured directly using 3-D atom-probe tomography. At these temperatures, the Zr:Ti atomic ratio in the precipitates is about 10 and 5, respectively, indicating that most of the available Ti fails to partition to the Al3(Zr1- xTix) phase. This is consistent with prior studies on Al-Sc alloys, where the slower-diffusing ternary solute species make up a small fraction of the Al3Sc-based precipitates. Despite the confirmed presence of Ti, Al3(Zr1- xTix) precipitates exhibit no improvement in terms of

  18. Model for thermal stress resistance of truly elastic materials containing more than one crack. Ph.D. Thesis

    NASA Technical Reports Server (NTRS)

    Lineback, L. D.

    1974-01-01

    The model was developed upon the physical properties of surface energy and intrinsic modulus of elasticity of a material containing a number of equal sized microcracks which are independent of one another. The effect of these cracks upon the strain energy per unit volume of material necessary to continue simultaneous crack growth as well as the measured physical properties was established, and the thermal stress resistance is developed in terms of this energy. The model is expressed in its final form in terms of the measured physical properties of fracture strength, effective modulus of elasticity, and coefficient of thermal expansion. The model was applied to existent thermal stress data of ceramic materials for which these physical properties had been measured. On the basis of these data it was concluded that the thermal stress resistance of a material may be improved by increasing the fracture strength.

  19. A collection of strains containing genetically linked alternating antibiotic resistance elements for genetic mapping of Escherichia coli.

    PubMed Central

    Singer, M; Baker, T A; Schnitzler, G; Deischel, S M; Goel, M; Dove, W; Jaacks, K J; Grossman, A D; Erickson, J W; Gross, C A

    1989-01-01

    We present a collection of 182 isogenic strains containing genetically linked antibiotic resistance elements located at approximately 1-min intervals around the Escherichia coli chromosome. At most positions both Tn10 (Tetr) and TN10kan (Kanr) elements are available, so that the collection contains a linked set of alternating antibiotic resistance markers. The map position of each insertion has been aligned to the E. coli genetic map as well as to the Kohara ordered clone bank. These strains are designed to be used in a rapid two-step mapping system in E. coli. In the first step, the mutation is localized to a 5- to 15-min region of the chromosome by Hfr mapping with a set of Hfr strains containing either Tn10 or Tn10kan elements located 20 min from their respective origins of transfer. In the second step, the mutation is localized to a 1-min region by P1 transduction, with a collection of isogenic insertion strains as donors. We discuss the uses of this collection of strains to map and eventually to clone a variety of mutations in E. coli. PMID:2540407

  20. Delta ferrite-containing austenitic stainless steel resistant to the formation of undesirable phases upon aging

    SciTech Connect

    Leitnaker, J.M.

    1981-05-05

    Austenitic stainless steel alloys containing delta ferrite, such as are used as weld deposits, are protected against the transformation of delta ferrite to sigma phase during aging by the presence of carbon plus nitrogen in a weight percent 015-0.030 times the volume percent ferrite present in alloy. The formation of chi phase upon aging is controlled by controlling the mo content.

  1. Prediction of Corrosion Resistance of Concrete Containing Natural Pozzolan from Compressive Strength

    NASA Astrophysics Data System (ADS)

    al-Swaidani, A. M.; Ismat, R.; Diyab, M. E.; Aliyan, S. D.

    2015-11-01

    A lot of Reinforced Concrete (RC) structures in Syria have suffered from reinforcement corrosion which shortened significantly their service lives. Probably, one of the most effective approaches to make concrete structures more durable and concrete industry on the whole - more sustainable is to substitute pozzolan for a portion of Portland cement (PC). Syria is relatively rich in natural pozzolan. In the study, in order to predict the corrosion resistance from compressive strength, concrete specimens were produced with seven cement types: one plain Portland cement (control) and six natural pozzolan-based cements with replacement levels ranging from 10 to 35%. The development of the compressive strengths of concrete cube specimens with curing time has been investigated. Chloride penetrability has also been evaluated for all concrete mixes after three curing times of 7, 28 and 90 days. The effect on resistance of concrete against damage caused by corrosion of the embedded reinforcing steel has been investigated using an accelerated corrosion test by impressing a constant anodic potential for 7, 28 and 90 days curing. Test results have been statistically analysed and correlation equations relating compressive strength and corrosion performance have been developed. Significant correlations have been noted between the compressive strength and both rapid chloride penetrability and corrosion initiation times. So, this prediction could be reliable in concrete mix design when using natural pozzolan as cement replacement.

  2. Phosphate-Containing Polyethylene Glycol Polymers Prevent Lethal Sepsis by Multidrug-Resistant Pathogens

    SciTech Connect

    Zaborin, Alexander; Defazio, Jennifer; Kade, Matthew; Kaiser, Brooke LD; Belogortseva, Natalia; Camp, David G.; Smith, Richard D.; Adkins, Joshua N.; Kim, Sangman M.; Alverdy, Alexandria; Goldfeld, David; Firestone, Millicent; Collier, Joel; Jabri, Bana; Tirrell, Matthew; Zaborina, Olga; Alverdy, John C.

    2014-02-01

    The gastrointestinal tract is the primary site of colonization for multi-drug resistant healthcare associated pathogens (HAPs) that are the principal source and cause of life-threatening infections in critically ill patients. We previously identified a high molecular weight co-polymer (PEG15-20) with mucoadhesive and cytoprotective actions on the intestinal epithelium. In this report we covalently bonded phosphate (Pi) to PEG15-20 ( termed Pi-PEG15-20) to enhance its cytoprotective activity against microbial virulence activation and invasion based on our previous work showing that Pi is a key environmental cue regulating microbial virulence across pathogens of clinical importance to hospitalized patients. We demonstrated that Pi-PEG15-20 can suppress phosphate-, iron-, and quorum sensing signal- mediated activation of bacterial virulence as well as inhibit intestinal epithelial IL-8 release during lipopolysaccharide (LPS) exposure. Pi-PEG15-20 also prevented mortality in C. elegans and mice exposed to several highly virulent and antibiotic(?)-resistant health care acquired pathogens (HAPs) while preserving the normal microbiota. Intestinal application Pi-PEG 15-20 has the potential to be a useful agent to prevent the pathogenic activation of microbes during critical illness where exposure to HAPs is ubiquitous.

  3. Ertapenem-Containing Double-Carbapenem Therapy for Treatment of Infections Caused by Carbapenem-Resistant Klebsiella pneumoniae

    PubMed Central

    Cprek, Jessica B.

    2015-01-01

    We describe outcomes of patients with infections with carbapenem-resistant Klebsiella pneumoniae (CRKP) who received ertapenem-containing double-carbapenem therapy (ECDCT). Clinical success was observed in 7/18 (39%) patients overall: bloodstream infections, 3/7 (43%); pneumonia, 1/5 (20%); intraabdominal infections, 0/2 (0%); urinary tract infections, 2/3 (67%); and a skin and skin structure infection, 1/1 (100%). Microbiologic success was observed in 11/14 (79%) evaluable patients; 5/18 (28%) patients died. ECDCT may be effective for CRKP infections with limited treatment options. PMID:26552970

  4. Delta ferrite-containing austenitic stainless steel resistant to the formation of undesirable phases upon aging

    DOEpatents

    Leitnaker, J.M.

    Austenitic stainless steel alloys containing delta ferrite, such as are used as weld deposits, are protected against the transformation of delta ferrite to sigma phase during aging by the presence of carbon plus nitrogen in a weight percent 0.015 to 0.030 times the volume percent ferrite present in the alloy. The formation of chi phase upon aging is controlled by controlling the Mo content.

  5. Delta ferrite-containing austenitic stainless steel resistant to the formation of undesirable phases upon aging

    DOEpatents

    Leitnaker, James M.

    1981-01-01

    Austenitic stainless steel alloys containing delta ferrite, such as are used as weld deposits, are protected against the transformation of delta ferrite to sigma phase during aging by the presence of carbon plus nitrogen in a weight percent 0.015-0.030 times the volume percent ferrite present in the alloy. The formation of chi phase upon aging is controlled by controlling the Mo content.

  6. Radiation degradation behavior of chlorine-containing vinyl copolymers. Search for improved electron-beam resists

    SciTech Connect

    Helbert, J.N.; Poindexter, E.H.; Pittman, C.U. Jr.; Chen, C.Y.

    1980-06-01

    Vinyl copolymers with high radiation degradation sensitivity have been synthesized by copolymerizing vinylidene chloride (VDC), CH/sub 2/ = CCl/sub 2/, with methyl methacrylate (MMA), methacrylonitrile, methyl ..cap alpha..-chloroacrylate, and dimethyl itaconate using emulsion techniques. In addition, copolymers of methyl ..cap alpha..-chloroacrylate with methyl methacrylate and poly(..cap alpha..-chloroacrylonitrile) were studied. Introduction of vinylidene chloride into methyl methacrylate polymers caused a sharp increase in G/sub s/ even at relatively low VDC incorporation. Upon 29% VDC incorporation, the G/sub s/ value increased from 1.3 (homopolymer of MMA) to 3.4. G/sub s/ was found to be a linear function of copolymer content for several systems, but G/sub x/ was not. At higher VDC levels, the increase in G/sub s/ was countered by increases in G/sub x/. At lower VDC levels, G/sub x/ was suppressed below the values predicted by a linear G/sub x/ dependence on composition for such systems as VDC/MMA, MCA/MMA, and ..cap alpha..-chloroacrylonitrile/MMA. The VDC/MMA copolymer (29% VDC) gave a sensitivity of 4.0 x 10/sup -5/ C/cm/sup 2/ to electron beam exposure using the 0% unexposed resist thickness loss criterion and is 2 to 3 times more sensitive than PMMA. Poly(..cap alpha..-chloroacrylonitrile) is a negative resist with a sensitivity of 5 x 10/sup -5/ C/cm/sup 2/ using one-micron line images for testing.

  7. Enhancement of Processability and Electrical Resistance by Use of Ag-Based Composite Inks Containing Ultrafine SAC305 Alloy Nanoparticles

    NASA Astrophysics Data System (ADS)

    Shin, Yong Moo; Kim, Hyun-Jin; Jang, Seok Pil; Lee, Jong-Hyun

    2014-09-01

    We propose use of Ag/Sn-3.0 (wt.%) Ag-0.5 Cu (SAC305) composite ink to reduce sintering temperature, sintering time, and material costs. The SAC305 nanoparticle (NP) surfaces were not capped by any stabilizers, which are detrimental to the resistivity of the sintered tracks. Compared with commercial pure Ag ink, use of Ag/3.2 (vol.%) SAC305 composite ink containing ultrafine SAC305 NPs resulted in outstandingly enhanced processability, enabling faster sintering at low temperatures. The average sheet resistance of composite ink samples sintered for 25 min at 170°C was as low as 0.011 Ω/□, comparable with that of a pure Ag sample sintered for over 30 min at 220°C. The morphology and the differential scanning calorimetry curves enabled explanation of the changes in the sintering behavior and sheet resistance. The Ag/SAC305 clusters in the composite ink sintered at 170°C grew, on average, to ~201.1-226.1 nm as a result of faster local liquid-phase sintering, and most of the Ag particles were mutually linked, dramatically changing the microstructure.

  8. High-transparency and low-resistivity poly (methylmethacrylate) films containing silver nanowires and graphene-oxide nanoplatelets

    NASA Astrophysics Data System (ADS)

    Bang, Yo Han; Choo, Dong Chul; Kim, Tae Whan

    2016-07-01

    Nanocomposite films containing silver nanowires (Ag NWs) and graphene-oxide nanoplatelets (GONPs) were formed on glass, and the nanocomposite films were then transferred to poly(methylmethacrylate) (PMMA) films. Scanning electron microscopy images showed that Ag NWs with a length of 20 μm and a width of 80 nm, together with GONPs with a size of 15 μm, had been formed on the PMMA film and that the Ag NWs on the PMMA film were partially covered with the GONPs. While the transmittance of the PMMA film with the Ag NWs and the GONPs was almost the same as that of the PMMA film with the Ag NWs alone, the corresponding sheet resistance was decreased due to the generation of quaternary nitrogen in the GONPs, which the results of X-ray photoelectron spectroscopy and Raman spectroscopy confirmed. The transmittance and the sheet resistance of the PMMA film containing Ag NWs and GONPs were approximately 90% at 550 nm and 24 Ohm/sq, respectively.

  9. Intestinal mucosal mast cells from rats infected with Nippostrongylus brasiliensis contain protease-resistant chondroitin sulfate di-B proteoglycans

    SciTech Connect

    Stevens, R.L.; Lee, T.D.G.; Seldin, D.C.; Austen, K.F.; Befus, A.D.; Bienenstock, J.

    1986-07-01

    Rats infected with the helminth Nippostrongylus brasiliensis were injected i.p. with 2 mCi of (/sup 35/S) sulfate on days 13, 15, 17, and 19 after infection. The intestines were removed from animals on day 20 or 21 after infection, the intestinal cells were obtained by collagenase treatment and mechanical dispersion of the tissue, and the /sup 35/S-labeled mucosal mast cells (MMC) were enriched to 60 to 65% purity by Percoll centrifugation. The isolated proteoglycans were of approx. 150,000 m.w., were resistant to pronase degradation, and contained highly sulfated chondroitin sulfate side chains. The presence in normal mammalian cells of chondroitin sulfate proteoglycans that contain a high percentage of the unusual disulfated di-B disaccharide has not been previously reported. The rat intestinal MMC proteoglycans are the first chondroitin sulfate proteoglycans that have been isolated from an enriched populations of normal mast cells. They are homologous to the chondroitin sulfate-rich proteoglycans of the transformed rat basophilic leumekia-1 cell and the cultured interleukin 3-dependent mouse bone marrow-derived mast cell, in that these chondroitin sulfate proteoglycans are all highly sulfated, protease-resistant proteoglycans.

  10. The Chornobyl Accident: A Comprehensive Risk Assessment

    SciTech Connect

    Poyarkov, Victor A.; Vargo, George J.; George J. Vargo

    2000-01-01

    This book provides a comprehensive of the April 1986 Chornobyl Nuclear Power Plant accident and its short and long-term effects in the fourteen years since the accident. Chapters include: cause and description of the accident; the Shelter constructed to contain the remains the destroyed reactor, radioactive wastes arising from the accident, environmental contamination, individual and collective radiation doses, societal aspects, economic impact and conclusions. Appendices on radiological units, the medical consequences of the accident, and a list of acronym and abbreviations are included.

  11. Over-Expression of Rice CBS Domain Containing Protein, OsCBSX3, Confers Rice Resistance to Magnaporthe oryzae Inoculation.

    PubMed

    Mou, Shaoliang; Shi, Lanping; Lin, Wei; Liu, Yanyan; Shen, Lei; Guan, Deyi; He, Shuilin

    2015-01-01

    Cystathionine β-synthase (CBS) domain containing proteins (CDCPs) constitute a big family in plants and some members in this family have been implicated in a variety of biological processes, but the precise functions and the underlying mechanism of the majority of this family in plant immunity remain to be elucidated. In the present study, a CBS domain containing protein gene, OsCBSX3, is functionally characterized in rice resistance against Magnaporthe oryzae (M. oryzae). By quantitative real-time PCR, transcripts of OsCBSX3 are up-regulated significantly by inoculation of M. oryzae and the exogenously applied salicylic acid (SA) and methyl jasmonate (MeJA). OsCBSX3 is exclusively localized to the plasma membrane by transient expression of OsCBSX3 fused to green fluorescent protein (GFP) through approach of Agrobacterium infiltration in Nicotiana benthamiana leaves. The plants of homozygous T3 transgenic rice lines of over-expressing OsCBSX3 exhibit significant enhanced resistance to M. oryzae inoculation, manifested by decreased disease symptoms, and inhibition of pathogen growth detected in DNA. Consistently, the over-expression of OsCBSX3 enhances the transcript levels of immunity associated marker genes including PR1a, PR1b, PR5, AOS2, PAL, NH1, and OsWRKY13 in plants inoculated with M. oryzae. These results suggest that OsCBSX3 acts as a positive regulator in resistance of rice to M. oryzae regulated by SA and JA-mediated signaling pathways synergistically. PMID:26184180

  12. Over-Expression of Rice CBS Domain Containing Protein, OsCBSX3, Confers Rice Resistance to Magnaporthe oryzae Inoculation

    PubMed Central

    Mou, Shaoliang; Shi, Lanping; Lin, Wei; Liu, Yanyan; Shen, Lei; Guan, Deyi; He, Shuilin

    2015-01-01

    Cystathionine β-synthase (CBS) domain containing proteins (CDCPs) constitute a big family in plants and some members in this family have been implicated in a variety of biological processes, but the precise functions and the underlying mechanism of the majority of this family in plant immunity remain to be elucidated. In the present study, a CBS domain containing protein gene, OsCBSX3, is functionally characterized in rice resistance against Magnaporthe oryzae (M. oryzae). By quantitative real-time PCR, transcripts of OsCBSX3 are up-regulated significantly by inoculation of M. oryzae and the exogenously applied salicylic acid (SA) and methyl jasmonate (MeJA). OsCBSX3 is exclusively localized to the plasma membrane by transient expression of OsCBSX3 fused to green fluorescent protein (GFP) through approach of Agrobacterium infiltration in Nicotiana benthamiana leaves. The plants of homozygous T3 transgenic rice lines of over-expressing OsCBSX3 exhibit significant enhanced resistance to M. oryzae inoculation, manifested by decreased disease symptoms, and inhibition of pathogen growth detected in DNA. Consistently, the over-expression of OsCBSX3 enhances the transcript levels of immunity associated marker genes including PR1a, PR1b, PR5, AOS2, PAL, NH1, and OsWRKY13 in plants inoculated with M. oryzae. These results suggest that OsCBSX3 acts as a positive regulator in resistance of rice to M. oryzae regulated by SA and JA-mediated signaling pathways synergistically. PMID:26184180

  13. Resistance profiles observed in virological failures after 24 weeks of amprenavir/ritonavir containing regimen in protease inhibitor experienced patients.

    PubMed

    Marcelin, Anne-Geneviève; Affolabi, Dissou; Lamotte, Claire; Mohand, Hocine Ait; Delaugerre, Constance; Wirden, Marc; Voujon, Delphine; Bossi, Philippe; Ktorza, Nadine; Bricaire, François; Costagliola, Dominique; Katlama, Christine; Peytavin, Gilles; Calvez, Vincent

    2004-09-01

    Amprenavir (APV) is an HIV protease inhibitor (PI) used for the treatment of either naive or PI-experienced HIV-infected patients. Several genotypic resistance pathways in protease gene have been described to be associated to unboosted APV failure (I50V, V32I + I47V, I54L/M, or less commonly I84V, which may be accompanied by one ore more accessory mutations such as L10F, L33F, M46I/L). The aims of this study were to investigate the efficacy up to week 24 of an APV plus ritonavir containing regimen in PI experienced patients and to determine the genotypic resistance profiles emerging in patients failing to this therapy. Forty-nine, PI experienced but APV naïve patients were treated with APV (600 mg bid) plus ritonavir (100 mg bid). By intent-to-treat analysis, the median decrease in viral load (VL) was -1.32 log10 (min +0.6; max -2.8) and -1.46 log10 (min +0.5; max -2.8) 12 and 24 weeks after initiating APV plus ritonavir regimen, respectively. Twelve patients harboured a VL >200 copies/ml at week 24. Among these patients, the selection of mutations previously described with the use of APV as first PI (V32I, L33F, M46I/L, I50V, 54M/L, and I84V) was observed. However, in some cases, mutations classically described after the use of other PIs (V82F and L90M) were selected but always with APV-specific mutations. There was no relation between the resistance pathways selected with either APV or ritonavir plasma minimal concentration, but higher APV plasma minimal concentration were associated with a lower rate of resistance mutations selection. PMID:15258963

  14. Boron(III)-Containing Donor-Acceptor Compound with Goldlike Reflective Behavior for Organic Resistive Memory Devices.

    PubMed

    Poon, Chun-Ting; Wu, Di; Yam, Vivian Wing-Wah

    2016-03-01

    A small-molecule-based boron(III)-containing donor-acceptor compound has been designed and synthesized. Interesting goldlike reflective behavior was observed in the neat thin-film sample from simple spin-coating preparation, which can serve as a potential organic thin-film optical reflector. The small thickness in nanometer range and the relatively smooth surface morphology, together with simple preparation and easy solution processability, are attractive features for opening up new avenues for the fabrication of reflective coatings. Moreover, this donor-acceptor compound has been employed in the fabrication of organic resistive memory device, which exhibited good performance with low turn-on voltage, small operating bias, large ON/OFF ratio, and long retention time. PMID:26879606

  15. Successful treatment of a neonate with persistent vancomycin-resistant enterococcal bacteremia with a daptomycin-containing regimen.

    PubMed

    Beneri, Christy A; Nicolau, David P; Seiden, Howard S; Rubin, Lorry G

    2008-01-01

    Infections caused by vancomycin-resistant enterococci (VRE) may be difficult to treat because of the limited armamentarium of antimicrobial agents. The difficulty is compounded in pediatric patients in general and neonates in particular because many of the newer antimicrobials have not been studied or approved for children. We report a 3-week-old infant who developed enterococcal bacteremia on post-operative day 10 after a surgical palliation for complex congenital heart disease that was complicated by acute renal failure. Despite removal of vascular catheters and antimicrobial regimens that included linezolid, quinupristin/dalfopristin, ampicillin/sulbactam, rifampin, and gentamicin, bacteremia persisted. It was not cleared until daptomycin (in combination with doxycycline) was started. This is the first case of successful treatment of probable endocarditis due to VRE in a neonate using a daptomycin-containing regimen. PMID:21694874

  16. A Phosphole Oxide-Containing Organogold(III) Complex for Solution-Processable Resistive Memory Devices with Ternary Memory Performances.

    PubMed

    Hong, Eugene Yau-Hin; Poon, Chun-Ting; Yam, Vivian Wing-Wah

    2016-05-25

    A novel class of luminescent phosphole oxide-containing alkynylgold(III) complex has been synthesized, characterized, and applied as active material in the fabrication of solution-processable resistive memory devices. Incorporation of the phosphole oxide moiety in gold(III) system has been demonstrated to provide an extra charge-trapping site, giving rise to intriguing ternary memory performances with distinct and low switching threshold voltages, high OFF/ON1/ON2 current ratio of 1/10(3)/10(7), and long retention time for the three states. The present study offers vital insights for the future development of multilevel memory devices using small-molecule organometallic compounds. PMID:27163338

  17. Evaluation of insecticide ear tags containing ethion for control of pyrethroid resistant Haematobia irritans (L.) on dairy cattle.

    PubMed

    Anziani, O S; Zimmermann, G; Guglielmone, A A; Forchieri, M; Volpogni, M M

    2000-07-24

    A field study was conducted in central Argentina to evaluate the efficacy of ear tags containing 36% ethion against pyrethroid resistant populations of Haematobia irritans on grazing dairy cattle. The treated group consisted of 45 milking Holstein cows which received two tags per head and the control consisted of 22 dry cows from the same cohort. Treated and control groups were grazed on similar lucerne pastures separated for a minimum distance of 800 m but they were not isolated from other cattle herds on the same or contiguous properties. In both groups, horn fly estimation were made weekly by examining cattle in the pastures with the aid of binoculars. The percentage reduction of fly numbers on treated cows was considered as efficacy of control provided by the tags. The ethion ear tags provided a range of 85-99% reduction in horn fly numbers for 16 weeks. During this period, the weekly mean number of H. irritans on the tagged cows ranged between 0.44 and 28.26 compared with 143.5 and 239.1 in control animals. The ethion ear tags could be a useful tool for the control of H. irritans mainly in areas where populations of this insect have developed resistance to pyrethroid insecticides. PMID:10889367

  18. Development of aircraft lavatory compartments with improved fire resistance characteristics, phase 1: Fire containment test of a wide body aircraft lavatory module

    NASA Technical Reports Server (NTRS)

    Anderson, R. A.; Arnold, D. B.; Johnson, G. A.; Tustin, E. A.

    1978-01-01

    A test was conducted to evaluate the fire containment characteristics of a Boeing 747 lavatory module. Results showed that the fire was contained within the lavatory during the 30-minute test period with the door closed. The resistance of the lavatory wall and ceiling panels and general lavatory construction to burn-through under the test conditions was demonstrated.

  19. Molecular characterization of vancomycin-resistant enterococci and extended-spectrum β-lactamase-containing Escherichia coli isolates in wild birds from the Azores Archipelago.

    PubMed

    Silva, Nuno; Igrejas, Gilberto; Rodrigues, Pedro; Rodrigues, Tiago; Gonçalves, Alexandre; Felgar, Ana Carolina; Pacheco, Rui; Gonçalves, David; Cunha, Regina; Poeta, Patrícia

    2011-10-01

    To study the prevalence of vancomycin-resistant enterococci (VRE) and extended-spectrum β-lactamase (ESBL)-containing Escherichia coli isolates, and the mechanisms of resistance implicated, 220 faecal samples from wild birds were collected between 2006 and 2010 in the Azores Archipelago. Samples were spread on Slanetz-Bartley agar plates supplemented with 4 mg/l vancomycin and on Levine agar plates supplemented with 2 mg/l cefotaxime for VRE and ESBL-containing E. coli isolation, respectively. vanA-containing enterococcal isolates (four Enterococcus faecium and two Enterococcus durans) and vanC-1 Enterococcus gallinarum isolates were detected in six and seven faecal samples, respectively. VRE isolates showed ampicillin (n=11), ciprofloxacin (n=9), tetracycline (n=6), erythromycin (n=5), quinupristin/dalfopristin (n=3) and high-level kanamycin resistance (n=1). The tet(L) and/or tet(M) gene was found in all tetracycline-resistant isolates and the erm(B) gene in all erythromycin-resistant isolates. Three vanA-containing E. faecium and two E. gallinarum presented specific sequences of the Tn5397 transposon. Four VRE isolates harboured the ace virulence gene. One faecal sample revealed one ESBL-containing E. coli isolate that belongs to the A phylogenetic group, showed a phenotype of resistance to β-lactams and tetracycline, and harboured the bla (CTX-M-14), bla (SHV-12) and the tet(A) genes. To our knowledge, this is the first study to focus on defining the prevalence of VRE and/or ESBL-containing E. coli strains in wild birds from the Azores. The data recovered are essential to improve knowledge about the dissemination of resistant strains through wild ecosystems and their possible implications by transferring these resistances to other animals or to humans. PMID:21834624

  20. Activity and biophysical inhibition resistance of a novel synthetic lung surfactant containing Super-Mini-B DATK peptide

    PubMed Central

    Notter, Robert H.; Wang, Zhengdong

    2016-01-01

    Background/objectives. This study examines the surface activity, resistance to biophysical inhibition, and pulmonary efficacy of a synthetic lung surfactant containing glycerophospholipids combined with Super Mini-B (S-MB) DATK, a novel and stable molecular mimic of lung surfactant protein (SP)-B. The objective of the work is to test whether S-MB DATK synthetic surfactant has favorable biophysical and physiological activity for future use in treating surfactant deficiency or dysfunction in lung disease or injury. Methods. The structure of S-MB DATK peptide was analyzed by homology modeling and by FTIR spectroscopy. The in vitro surface activity and inhibition resistance of synthetic S-MB DATK surfactant was assessed in the presence and absence of albumin, lysophosphatidylcholine (lyso-PC), and free fatty acids (palmitoleic and oleic acid). Adsorption and dynamic surface tension lowering were measured with a stirred subphase dish apparatus and a pulsating bubble surfactometer (20 cycles/min, 50% area compression, 37 °C). In vivo pulmonary activity of S-MB DATK surfactant was measured in ventilated rabbits with surfactant deficiency/dysfunction induced by repeated lung lavages that resulted in arterial PO2 values <100 mmHg. Results. S-MB DATK surfactant had very high surface activity in all assessments. The preparation adsorbed rapidly to surface pressures of 46–48 mN/m at 37 °C (low equilibrium surface tensions of 22–24 mN/m), and reduced surface tension to <1 mN/m under dynamic compression on the pulsating bubble surfactometer. S-MB DATK surfactant showed a significant ability to resist inhibition by serum albumin, C16:0 lyso-PC, and free fatty acids, but surfactant inhibition was mitigated by increasing surfactant concentration. S-MB DATK synthetic surfactant quickly improved arterial oxygenation and lung compliance after intratracheal instillation to ventilated rabbits with severe surfactant deficiency. Conclusions. S-MB DATK is an active mimic of native SP

  1. Activity and biophysical inhibition resistance of a novel synthetic lung surfactant containing Super-Mini-B DATK peptide.

    PubMed

    Notter, Robert H; Wang, Zhengdong; Walther, Frans J

    2016-01-01

    Background/objectives. This study examines the surface activity, resistance to biophysical inhibition, and pulmonary efficacy of a synthetic lung surfactant containing glycerophospholipids combined with Super Mini-B (S-MB) DATK, a novel and stable molecular mimic of lung surfactant protein (SP)-B. The objective of the work is to test whether S-MB DATK synthetic surfactant has favorable biophysical and physiological activity for future use in treating surfactant deficiency or dysfunction in lung disease or injury. Methods. The structure of S-MB DATK peptide was analyzed by homology modeling and by FTIR spectroscopy. The in vitro surface activity and inhibition resistance of synthetic S-MB DATK surfactant was assessed in the presence and absence of albumin, lysophosphatidylcholine (lyso-PC), and free fatty acids (palmitoleic and oleic acid). Adsorption and dynamic surface tension lowering were measured with a stirred subphase dish apparatus and a pulsating bubble surfactometer (20 cycles/min, 50% area compression, 37 °C). In vivo pulmonary activity of S-MB DATK surfactant was measured in ventilated rabbits with surfactant deficiency/dysfunction induced by repeated lung lavages that resulted in arterial PO2 values <100 mmHg. Results. S-MB DATK surfactant had very high surface activity in all assessments. The preparation adsorbed rapidly to surface pressures of 46-48 mN/m at 37 °C (low equilibrium surface tensions of 22-24 mN/m), and reduced surface tension to <1 mN/m under dynamic compression on the pulsating bubble surfactometer. S-MB DATK surfactant showed a significant ability to resist inhibition by serum albumin, C16:0 lyso-PC, and free fatty acids, but surfactant inhibition was mitigated by increasing surfactant concentration. S-MB DATK synthetic surfactant quickly improved arterial oxygenation and lung compliance after intratracheal instillation to ventilated rabbits with severe surfactant deficiency. Conclusions. S-MB DATK is an active mimic of native SP

  2. Radiation accidents.

    PubMed

    Saenger, E L

    1986-09-01

    It is essential that emergency physicians understand ways to manage patients contaminated by radioactive materials and/or exposed to external radiation sources. Contamination accidents require careful surveys to identify the metabolic pathway of the radionuclides to guide prognosis and treatment. The level of treatment required will depend on careful surveys and meticulous decontamination. There is no specific therapy for the acute radiation syndrome. Prophylactic antibodies are desirable. For severely exposed patients treatment is similar to the supportive care given to patients undergoing organ transplantation. For high-dose extremity injury, no methods have been developed to reverse the fibrosing endarteritis that eventually leads to tissue death so frequently found with this type of injury. Although the Three Mile Island episode of March 1979 created tremendous public concern, there were no radiation injuries. The contamination outside the reactor building and the release of radioiodine were negligible. The accidental fuel element meltdown at Chernobyl, USSR, resulted in many cases of acute radiation syndrome. More than 100,000 people were exposed to high levels of radioactive fallout. The general principles outlined here are applicable to accidents of that degree of severity. PMID:3526994

  3. Radiation accidents

    SciTech Connect

    Saenger, E.L.

    1986-09-01

    It is essential that emergency physicians understand ways to manage patients contaminated by radioactive materials and/or exposed to external radiation sources. Contamination accidents require careful surveys to identify the metabolic pathway of the radionuclides to guide prognosis and treatment. The level of treatment required will depend on careful surveys and meticulous decontamination. There is no specific therapy for the acute radiation syndrome. Prophylactic antibodies are desirable. For severely exposed patients treatment is similar to the supportive care given to patients undergoing organ transplantation. For high-dose extremity injury, no methods have been developed to reverse the fibrosing endarteritis that eventually leads to tissue death so frequently found with this type of injury. Although the Three Mile Island episode of March 1979 created tremendous public concern, there were no radiation injuries. The contamination outside the reactor building and the release of radioiodine were negligible. The accidental fuel element meltdown at Chernobyl, USSR, resulted in many cases of acute radiation syndrome. More than 100,000 people were exposed to high levels of radioactive fallout. The general principles outlined here are applicable to accidents of that degree of severity.

  4. Spatial distribution, work patterns, and perception towards malaria interventions among temporary mobile/migrant workers in artemisinin resistance containment zone

    PubMed Central

    2014-01-01

    Background Mobile populations are at a high risk of malaria infection and suspected to carry and spread resistant parasites. The Myanmar National Malaria Control Programme focuses on preventive interventions and vector control measures for the temporary mobile/migrant workers in Myanmar Artemisinin Resistance Containment Zones. Methods A prospective cross-sectional study was conducted in 2012 in Kawthaung and Bokepyin townships of Tanintharyi Region, Myanmar, covering 192 mobile/migrant aggregates. The objectives were to identify the spatial distribution of the mobile/migrant populations, and to assess knowledge, attitudes, perceptions, and practices concerning malaria prevention and control, and their preferred methods of interventions. The structure of the192 migrant aggregates was investigated using a migrant mapping tool. Individual and household information was collected by structured interviews of 408 respondents from 39 aggregates, supplemented by 12 in-depth interviews of health care providers, authorities, volunteers, and employers. Data were analyzed by triangulating quantitative and qualitative data. Results The primary reasons for the limitation in access to formal health services for suspected malaria within 24 hours were identified to be scattered distribution of migrant aggregates, variable working hours and the lack of transportation. Only 19.6% of respondents reported working at night from dusk to dawn. Among study populations, 73% reported a perceived risk of contracting malaria and 60% reported to know how to confirm a suspected case of malaria. Moreover, only 15% was able to cite correct antimalarial drugs, and less than 10% believed that non-compliance with antimalarial treatment may be related to the risk of drug resistance. About 50% of study population reported to seeking health care from the public sector, and to sleep under ITNs/LLINs the night before the survey. There was a gap in willingness to buy ITNs/LLINs and affordability (88.5% vs

  5. Feeding a diet containing resistant potato starch influences gastrointestinal tract traits and growth performance of weaned pigs.

    PubMed

    Heo, J M; Agyekum, A K; Yin, Y L; Rideout, T C; Nyachoti, C M

    2014-09-01

    The aim was to evaluate the effects of feeding resistant potato starch (RPS) as a natural source of resistant starch to weaned pigs for 28 d immediately after weaning. Sixty piglets (Yorkshire-Landrace × Duroc) weaned at 21 ± 2 d (1:1 male:female) with an initial BW of 7.2 ± 0.78 kg were assigned in a completely randomized design to 1 of 5 dietary treatments to give 6 observations per treatment and 2 pigs per pen. Dietary treatments consisted of a negative control corn-soybean meal-wheat-wheat middlings-based diet (NC; no antimicrobial agents added) or the NC supplemented with RPS either as powder or in capsules and each included at 0.5 or 1.0% as a top-dressing on each day. Diets were formulated to meet 1998 NRC specifications. Pigs were offered the experimental diets on an ad libitum basis for 28 d and water was available at all times. The ADG, ADFI, and G:F were determined weekly. Fecal score was determined daily for 14 d after weaning. At the conclusion of study, 1 pig from each pen was randomly selected and euthanized (n = 6 per treatment) to determine visceral organ weight, digesta pH, VFA, and ammonia N (NH3-N) concentrations. Resistant potato starch supplementation improved (P < 0.001) fecal score, and pigs offered 1.0% RPS had more solid feces (P < 0.05) than those offered 0.5% RPS during the first 14 d after weaning, independent of the form of RPS. Resistant potato starch supplementation decreased (P < 0.05) ileal and cecal digesta pH regardless of the levels of RPS or mode of delivery. The total VFA concentrations in cecal digesta were greater (P < 0.05) but the molar proportion of branched-chain fatty acids were lower (P < 0.05) for pigs fed the RPS-containing diets compared with those fed the NC, irrespective of the RPS levels or the form of RPS. However, there were no differences (P > 0.10) in visceral organ weights, growth performance, and digestibilities of DM, CP, Ca, and P among treatments. The results of this experiment indicate that

  6. Severe accident analysis using dynamic accident progression event trees

    NASA Astrophysics Data System (ADS)

    Hakobyan, Aram P.

    In present, the development and analysis of Accident Progression Event Trees (APETs) are performed in a manner that is computationally time consuming, difficult to reproduce and also can be phenomenologically inconsistent. One of the principal deficiencies lies in the static nature of conventional APETs. In the conventional event tree techniques, the sequence of events is pre-determined in a fixed order based on the expert judgments. The main objective of this PhD dissertation was to develop a software tool (ADAPT) for automated APET generation using the concept of dynamic event trees. As implied by the name, in dynamic event trees the order and timing of events are determined by the progression of the accident. The tool determines the branching times from a severe accident analysis code based on user specified criteria for branching. It assigns user specified probabilities to every branch, tracks the total branch probability, and truncates branches based on the given pruning/truncation rules to avoid an unmanageable number of scenarios. The function of a dynamic APET developed includes prediction of the conditions, timing, and location of containment failure or bypass leading to the release of radioactive material, and calculation of probabilities of those failures. Thus, scenarios that can potentially lead to early containment failure or bypass, such as through accident induced failure of steam generator tubes, are of particular interest. Also, the work is focused on treatment of uncertainties in severe accident phenomena such as creep rupture of major RCS components, hydrogen burn, containment failure, timing of power recovery, etc. Although the ADAPT methodology (Analysis of Dynamic Accident Progression Trees) could be applied to any severe accident analysis code, in this dissertation the approach is demonstrated by applying it to the MELCOR code [1]. A case study is presented involving station blackout with the loss of auxiliary feedwater system for a

  7. An unusual Tn21-like transposon containing an ars operon is present in highly arsenic-resistant strains of the biomining bacterium Acidithiobacillus caldus.

    PubMed

    Tuffin, I Marla; de Groot, Peter; Deane, Shelly M; Rawlings, Douglas E

    2005-09-01

    A transposon, TnAtcArs, that carries a set of arsenic-resistance genes was isolated from a strain of the moderately thermophilic, sulfur-oxidizing, biomining bacterium Acidithiobacillus caldus. This strain originated from a commercial plant used for the bio-oxidation of gold-bearing arsenopyrite concentrates. Continuous selection for arsenic resistance over many years had made the bacterium resistant to high concentrations of arsenic. Sequence analysis indicated that TnAtcArs is 12 444 bp in length and has 40 bp terminal inverted repeat sequences and divergently transcribed resolvase and transposase genes that are related to the Tn21-transposon subfamily. A series of genes consisting of arsR, two tandem copies of arsA and arsD, two ORFs (7 and 8) and arsB is situated between the resolvase and transposase genes. Although some commercial strains of At. caldus contained the arsDA duplication, when transformed into Escherichia coli, the arsDA duplication was unstable and was frequently lost during cultivation or if a plasmid containing TnAtcArs was conjugated into a recipient strain. TnAtcArs conferred resistance to arsenite and arsenate upon E. coli cells. Deletion of one copy of arsDA had no noticeable effect on resistance to arsenite or arsenate in E. coli. ORFs 7 and 8 had clear sequence similarity to an NADH oxidase and a CBS-domain-containing protein, respectively, but their deletion did not affect resistance to arsenite or arsenate in E. coli. TnAtcArs was actively transposed in E. coli, but no increase in transposition frequency in the presence of arsenic was detected. Northern hybridization and reporter gene studies indicated that although ArsR regulated the 10 kb operon containing the arsenic-resistance genes in response to arsenic, ArsR had no effect on the regulation of genes associated with transposition activity. PMID:16151213

  8. Fail-safe liquid containment materials

    SciTech Connect

    Watt, D.F.; Pan, R.

    1994-12-31

    The transportation of hazardous liquids poses a problem if the vehicle hauling the liquids is involved an accident. The current work is attempting to develop an inexpensive tough flexible sparsely-reinforced elastomer sheet to incorporate inside the containers, to contain leakage should the outer shell fail. The thermoplastic polyurethane elastomer is chosen as an ideal candidate for at least one side of a two-sheet matrix material because of its unique physical properties. This matrix is reinforced with webs of continuous fiber of various types and patterns. The reinforcement becomes a load carrying structure element designed to resist both crack initiation and propagation, in the accident event. In this paper, we focus on studying the deformation behaviour of the sparsely reinforced elastomer sheet by means of tensile tests, tear tests, snag tests, slow puncture tests, large missile impact tests and hydraulic bulge tests.

  9. Unravelling a vicious circle: animal feed marketed in Costa Rica contains irregular concentrations of tetracyclines and abundant oxytetracycline-resistant Gram-positive bacteria.

    PubMed

    Granados-Chinchilla, Fabio; Alfaro, Margarita; Chavarría, Guadalupe; Rodríguez, César

    2014-01-01

    Diverse tetracyclines are used to prevent and control bacterial infections in livestock and farmed fish. These drugs are administered through the diet, but farmers seldom check whether feed contains antibiotic-resistant bacteria that may colonise their crops or transfer their resistance traits to species of veterinary relevance. To examine whether antibiotic dosage defines the abundance of antibiotic-resistant bacteria in animal feed, we determined the concentration of parental compounds and epimers of oxytetracycline (OTC), doxycycline, tetracycline and chlortetracycline, as well as the abundance and resistance level of OTC-resistant bacteria in samples of fish (n = 21), poultry (n = 21), swine (n = 21), and shrimp feed (n = 21) marketed in Costa Rica. Fish feed contained the highest amounts of tetracyclines (119-8365 mg kg(-1)) and the largest proportion of bacteria resistant to 10 μg ml(-1) (1.8-92.4%) or 100 μg ml(-1) of OTC (12.5-63.8%). Poultry (78-438 mg kg(-1)) and swine (41-1076 mg kg(-1)) feed had intermediate concentrations of tetracyclines and OTC-resistant bacteria (0.2-66% and 0.3-49%, respectively), whereas shrimp feed showed the lowest amounts of tetracyclines (21.5-50.3 mg kg(-1)), no OTC and no culturable OTC-resistant bacteria. In line with these results, the MIC50 of OTC for 150 isolates from fish and poultry feed was > 256 µg ml(-1), while that of 150 bacteria isolated from swine feed was 192 µg ml(-1). Phenotypic tests, fatty acid profiles and proteotypic analyses by matrix-assisted laser desorption/ionisation-time of flight mass-spectroscopy revealed that most OTC-resistant isolates were Gram-positive bacteria of low G+C% content from the genera Staphylococcus and Bacillus. Clear correlations between OTC dosage and feed colonisation with OTC-resistant bacteria were seen in medicated feed for fish (r = 0.179-0.651). Nonetheless, some unmedicated feed for fish, swine and poultry contained large populations of OTC-resistant bacteria

  10. Evaluation of feeding distiller's grains, containing virginiamycin, on antimicrobial susceptibilities in fecal isolates of Enterococcus and Escherichia coli and prevalence of resistance genes in cattle

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Dried distiller’s grains (DG), produced from fermentations using no antibiotic (Control) or dosed with 2 or 20 ppm virginiamycin product and containing 0, 0.7, and 8.9 ppm virginiamycin, respectively, were fed to cattle and effects on antibiotic sensitivity and prevalence of resistance genes in comm...

  11. Growth, Immune Response and Resistance to Streptococcus iniae of Nile Tilapia Fed Diets Containing Various Levels of Vitamin C and E

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effect of dietary levels of vitamins C and E on growth performance, immune response and resistance of Nile tilapia to Streptococcus iniae challenge were evaluated. A basal practical diet containing 32% protein and 2900 kcal DE/kg was supplemented with three levels of vitamin C (0, 100, 2000 mg/k...

  12. Growth Response and Resistance to Streptococcus iniae of Nile Tilapia Oreochromis niloticus Fed Diets Containing Distiller’s Dried Grains with Solubles

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study was conducted to evaluate the effect of dietary levels of distiller’s dried grains with solubles (DDGS) on growth performance, body composition, hematology, immune response and resistance of Nile tilapia to Streptococcus iniae challenge. Five isocaloric diets containing DDGS at levels of ...

  13. Growth Performance and Resistance to Edwardsiella ictaluri of Channel Catfish (Ictalurus punctatus)Fed Diets Containing Distiller's Dried Grains with Solubles

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A study was conducted to examine the effect of dietary levels of distiller’s dried grains with solubles (DDGS) on growth, body composition, hematology, immune response and resistance of channel catfish, Ictalurus punctatus, to Edwardsiella ictaluri challenge. Five diets containing 0, 10, 20, 30 and ...

  14. Severe accident simulation at Olkiuoto

    SciTech Connect

    Tirkkonen, H.; Saarenpaeae, T.; Cliff Po, L.C.

    1995-09-01

    A personal computer-based simulator was developed for the Olkiluoto nuclear plant in Finland for training in severe accident management. The generic software PCTRAN was expanded to model the plant-specific features of the ABB Atom designed BWR including its containment over-pressure protection and filtered vent systems. Scenarios including core heat-up, hydrogen generation, core melt and vessel penetration were developed in this work. Radiation leakage paths and dose rate distribution are presented graphically for operator use in diagnosis and mitigation of accidents. Operating on an graphically for operator use in diagnosis and mitigation of accidents. Operating on an 486 DX2-66, PCTRAN-TVO achieves a speed about 15 times faster than real-time. A convenient and user-friendly graphic interface allows full interactive control. In this paper a review of the component models and verification runs are presented.

  15. Resistivity reduction of boron-doped multiwalled carbon nanotubes synthesized from a methanol solution containing boric acid

    NASA Astrophysics Data System (ADS)

    Ishii, Satoshi; Watanabe, Tohru; Ueda, Shinya; Tsuda, Shunsuke; Yamaguchi, Takahide; Takano, Yoshihiko

    2008-05-01

    Boron-doped multiwalled carbon nanotubes (MWNTs) were synthesized using a methanol solution of boric acid as a source material. Accurate measurements of the electrical resistivity of an individual boron-doped MWNT was performed with a four-point contact, which was fabricated using an electron beam lithography technique. The doped boron provides conduction carriers, which reduces the resistivity of the MWNT.

  16. Enrichment, Distribution of Vanadium-Containing Protein in Vanadium-Enriched Sea Cucumber Apostichopus japonicus and the Ameliorative Effect on Insulin Resistance.

    PubMed

    Liu, Yanjun; Zhou, Qingxin; Zhao, Yanlei; Wang, Yiming; Wang, Yuming; Wang, Jingfeng; Xu, Jie; Xue, Changhu

    2016-05-01

    Sea cucumbers are a potential source of natural organic vanadium that may improve insulin resistance. In this work, vanadium was accumulated rapidly in blood, body wall, and intestine by sea cucumber Apostichopus japonicus. Furthermore, water-soluble vanadium-containing proteins, the main form of the organic vanadium, were tentatively accumulated and isolated by a bioaccumulation experiment. It was also designed to evaluate the beneficial effect of vanadium-containing proteins (VCPs) from sea cucumber rich in vanadium on the development of hyperglycemia and insulin resistance in C57BL/6J mice fed with a high-fat high-sucrose diet (HFSD). HFSD mice treated with VCPs significantly decreased fasting blood glucose, serum insulin, and HOMA-IR values as compared to HFSD mice, respectively. Serum adiponectin, resistin, TNF-α, and leptin levels in insulin-resistant mice were dramatically reduced by a VCP supplement. These results show an ameliorative effect on insulin resistance by treatment with VCPs. Such compound seems to be a valuable therapy to achieve and/or maintain glycemic control and therapeutic agents in the treatment arsenal for insulin resistance and type 2 diabetes. PMID:26419760

  17. World commercial aircraft accidents

    SciTech Connect

    Kimura, C.Y.

    1993-01-01

    This report is a compilation of all accidents world-wide involving aircraft in commercial service which resulted in the loss of the airframe or one or more fatality, or both. This information has been gathered in order to present a complete inventory of commercial aircraft accidents. Events involving military action, sabotage, terrorist bombings, hijackings, suicides, and industrial ground accidents are included within this list. Included are: accidents involving world commercial jet aircraft, world commercial turboprop aircraft, world commercial pistonprop aircraft with four or more engines and world commercial pistonprop aircraft with two or three engines from 1946 to 1992. Each accident is presented with information in the following categories: date of the accident, airline and its flight numbers, type of flight, type of aircraft, aircraft registration number, construction number/manufacturers serial number, aircraft damage, accident flight phase, accident location, number of fatalities, number of occupants, cause, remarks, or description (brief) of the accident, and finally references used. The sixth chapter presents a summary of the world commercial aircraft accidents by major aircraft class (e.g. jet, turboprop, and pistonprop) and by flight phase. The seventh chapter presents several special studies including a list of world commercial aircraft accidents for all aircraft types with 100 or more fatalities in order of decreasing number of fatalities, a list of collision accidents involving commercial aircrafts, and a list of world commercial aircraft accidents for all aircraft types involving military action, sabotage, terrorist bombings, and hijackings.

  18. Map-based cloning and characterization of BPH29, a B3 domain-containing recessive gene conferring brown planthopper resistance in rice

    PubMed Central

    Wang, Ying; Cao, Liming; Zhang, Yuexiong; Cao, Changxiang; Liu, Fang; Huang, Fengkuan; Qiu, Yongfu; Li, Rongbai; Lou, Xiaojin

    2015-01-01

    Rice (Oryza sativa L.) production, essential for global food security, is threatened by the brown planthopper (BPH). The breeding of host-resistant crops is an economical and environmentally friendly strategy for pest control, but few resistance gene resources have thus far been cloned. An indica rice introgression line RBPH54, derived from wild rice Oryza rufipogon, has been identified with sustainable resistance to BPH, which is governed by recessive alleles at two loci. In this study, a map-based cloning approach was used to fine-map one resistance gene locus to a 24kb region on the short arm of chromosome 6. Through genetic analysis and transgenic experiments, BPH29, a resistance gene containing a B3 DNA-binding domain, was cloned. The tissue specificity of BPH29 is restricted to vascular tissue, the location of BPH attack. In response to BPH infestation, RBPH54 activates the salicylic acid signalling pathway and suppresses the jasmonic acid/ethylene-dependent pathway, similar to plant defence responses to biotrophic pathogens. The cloning and characterization of BPH29 provides insights into molecular mechanisms of plant–insect interactions and should facilitate the breeding of rice host-resistant varieties. PMID:26136269

  19. Pest resistant MoSi2-based materials containing in-situ grown .beta.-Si3N4whiskers

    NASA Technical Reports Server (NTRS)

    Hebsur, Mohan G. (Inventor)

    2001-01-01

    A MoSi.sub.2 pest resistant material includes in-situ grown .beta.-Si.sub.3 N.sub.4 whiskers. In addition to excellent pest resistance, the material provides a lower coefficient of thermal expansion for better match with continuous reinforcing fibers such as SiC fibers. A two stage heating and pressing production technique enables lower temperature processing with substantially full densification.

  20. Pest resistant MoSi2-based materials containing in-situ grown .beta.-Si3N4 whiskers

    NASA Technical Reports Server (NTRS)

    Hebsur, Mohan G. (Inventor)

    2002-01-01

    A MoSi.sub.2 pest resistant material includes in-situ grown .beta.-Si.sub.3 N.sub.4 whiskers. In addition to excellent pest resistance, the material provides a lower coefficient of thermal expansion for better match with continuous reinforcing fibers such as SiC fibers. A two stage heating and pressing production technique enables lower temperature processing with substantially full densification.

  1. Underground reactor containments: An option for the future?

    SciTech Connect

    Forsberg, C.W.; Kress, T.

    1997-02-18

    Changing world conditions and changing technologies suggest that serious consideration should be given to siting of nuclear power plants underground. Underground siting is not a new concept. Multiple research reactors, several weapons production reactors, and one power reactor have been built underground. What is new are the technologies and incentives that may now make underground siting a preferred option. The conditions and technologies, along with their implications, are discussed herein. Underground containments can be constructed in mined cavities or pits that are then backfilled with thick layers of rock and soil. Conventional above-ground containments resist assaults and accidents because of the strength of their construction materials and the effectiveness of their safety features that are engineered to reduce loads. However, underground containments can provide even more resistance to assaults and accidents because of the inertia of the mass of materials over the reactor. High-technology weapons or some internal accidents can cause existing strong-material containments to fail, but only very-high energy releases can move large inertial masses associated with underground containments. New methods of isolation may provide a higher confidence in isolation that is independent of operator action.

  2. Designing an Experimental "Accident"

    ERIC Educational Resources Information Center

    Picker, Lester

    1974-01-01

    Describes an experimental "accident" that resulted in much student learning, seeks help in the identification of nematodes, and suggests biology teachers introduce similar accidents into their teaching to stimulate student interest. (PEB)

  3. Accident tolerant fuels for LWRs: A perspective

    NASA Astrophysics Data System (ADS)

    Zinkle, S. J.; Terrani, K. A.; Gehin, J. C.; Ott, L. J.; Snead, L. L.

    2014-05-01

    The motivation for exploring the potential development of accident tolerant fuels in light water reactors to replace existing Zr alloy clad monolithic (U, Pu) oxide fuel is outlined. The evaluation includes a brief review of core degradation processes under design-basis and beyond-design-basis transient conditions. Three general strategies for accident tolerant fuels are being explored: modification of current state-of-the-art zirconium alloy cladding to further improve oxidation resistance (including use of coatings), replacement of Zr alloy cladding with an alternative oxidation-resistant high-performance cladding, and replacement of the monolithic ceramic oxide fuel with alternative fuel forms.

  4. A description of the general aviation fixed wing accident

    NASA Technical Reports Server (NTRS)

    Hall, D. S.

    1981-01-01

    The Emergency Local Transmitter (ELT) is a radio transmitter with a self-contained power source designed to provide notification of and homing to aircraft accident sites. The Crash Research Institute has monitored general aviation fixed-wing accidents in the United States and in Canada and has found that: (1) the ELT was destroyed in approximately 25% of all fatal accidents; (2) the ELT activated in about 62% of the fatal accidents, 69% of the fatal with survivors accidents, almost 80% of the serious accidents and about 57% of the minor accidents; (3) in fatal accidents the aircraft sections least likely to be destroyed are the vertical and horizontal tail surfaces; (4) antenna cable disconnection and antenna breakage caused failure to transmit usable signals; and (5) initial alerting control occurred in nearly half of the situations where the ELT aided in search.

  5. QUES, a new Phaseolus vulgaris genotype resistant to common bean weevils, contains the Arcelin-8 allele coding for new lectin-related variants.

    PubMed

    Zaugg, Isabelle; Magni, Chiara; Panzeri, Dario; Daminati, Maria Gloria; Bollini, Roberto; Benrey, Betty; Bacher, Sven; Sparvoli, Francesca

    2013-03-01

    In common bean (Phaseolus vulgaris L.), the most abundant seed proteins are the storage protein phaseolin and the family of closely related APA proteins (arcelin, phytohemagglutinin and α-amylase inhibitor). High variation in APA protein composition has been described and the presence of arcelin (Arc) has been associated with bean resistance against two bruchid beetles, the bean weevil (Acanthoscelides obtectus Say) and the Mexican bean weevil (Zabrotes subfasciatus Bohemian). So far, seven Arc variants have been identified, all in wild accessions, however, only those containing Arc-4 were reported to be resistant to both species. Although many efforts have been made, a successful breeding of this genetic trait into cultivated genotypes has not yet been achieved. Here, we describe a newly collected wild accession (named QUES) and demonstrate its resistance to both A. obtectus and Z. subfasciatus. Immunological and proteomic analyses of QUES seed protein composition indicated the presence of new Arc and arcelin-like (ARL) polypeptides of about 30 and 27 kDa, respectively. Sequencing of cDNAs coding for QUES APA proteins confirmed that this accession contains new APA variants, here referred to as Arc-8 and ARL-8. Moreover, bioinformatic analysis showed the two proteins are closely related to APA components present in the G12949 wild bean accession, which contains the Arc-4 variant. The presence of these new APA components, combined with the observations that they are poorly digested and remain very abundant in A. obtectus feces, so-called frass, suggest that the QUES APA locus is involved in the bruchid resistance. Moreover, molecular analysis indicated a lower complexity of the locus compared to that of G12949, suggesting that QUES should be considered a valuable source of resistance for further breeding purposes. PMID:23117719

  6. Constitutive heterologous expression of avrXa27 in rice containing the R gene Xa27 confers enhanced resistance to compatible Xanthomonas oryzae strains.

    PubMed

    Tian, Dongsheng; Yin, Zhongchao

    2009-01-01

    The vascular pathogen Xanthomonas oryzae pv. oryzae (Xoo) and nonvascular pathogen Xanthomonas oryzae pv. oryzicola (Xoc) cause bacterial blight (BB) and bacterial leaf streak (BLS) diseases of rice, respectively. We have previously identified the avirulence gene avrXa27 from Xoo PXO99(A), which specifically induces the expression of the rice resistance gene Xa27, ultimately leading to resistance against BB disease in rice. In this study, we have generated a transgenic rice line (L24) that expresses avrXa27 constitutively under the control of the PR1 promoter, and have examined its role in the host-pathogen interaction. L24 is not more susceptible to BB, indicating that avrXa27 does not contribute to virulence. AvrXa27 retains avirulence activity in L24 and, after crossing with a line containing Xa27, progeny display phenotypic changes including inhibition of tillering, delay in flowering, stiff leaves, early leaf senescence and activation of pathogenesis-related (PR) genes. On challenge with a variety of compatible strains of Xoo and Xoc strain L8, lines with both avrXa27 and Xa27 also show enhanced resistance to bacterial infection. The induction of Xa27 and subsequent inhibition of Xoc growth in Xa27 plants are observed on inoculation with Xoc L8 harbouring avrXa27. Our results indicate that the heterologous expression of avrXa27 in rice containing Xa27 triggers R gene-specific resistance and, at the same time, confers enhanced resistance to compatible strains of Xoo and Xoc. The expression of AvrXa27 and related proteins in plants has the potential to generate broad resistance in plants. PMID:19161350

  7. Evaluation of the in vitro activity of tigecycline against multiresistant Gram-positive cocci containing tetracycline resistance determinants.

    PubMed

    Borbone, Sonia; Lupo, Agnese; Mezzatesta, Maria Lina; Campanile, Floriana; Santagati, Maria; Stefani, Stefania

    2008-03-01

    This study was undertaken to test the in vitro activity of tigecycline against 117 clinically relevant Gram-positive pathogens and to correlate this activity with their resistance gene content. Overall, tigecycline showed a minimal inhibitory concentration (MIC) range of 0.015-0.5mg/L, able to inhibit potently all multiresistant streptococci, enterococci and MR staphylococci. Tigecycline was active against methicillin-resistant Staphylococcus aureus (MRSA) and enterococci, with MICs for 90% of the organisms (MIC(90)) of 0.25 mg/L and 0.12 mg/L, respectively, being more active than linezolid (MIC(90)=2 mg/L) and quinupristin/dalfopristin (MIC(90)=0.5 and 2-4 mg/L, respectively). Molecular characterisation of resistance determinants demonstrated the concomitant presence of different classes of genes: in particular, tet(M), erm(B) and erm(C) in Streptococcus agalactiae; tet(O), variably associated with different erm genes, in Streptococcus pyogenes; vanA, tet(M) and erm(B) in Enterococcus faecalis, and vanA and erm(B) in Enterococcus faecium. All the MRSA strains harboured SCCmec and erm genes and 50% possessed tet(K) with tet(M) genes. Staphylococcus epidermidis strains were only resistant to erythromycin. These results clearly demonstrate that tigecycline has a MIC(90) range of 0.015-0.5 mg/L both against tetracycline-susceptible and -resistant isolates carrying other resistance determinants, suggesting that this drug could play an important role in the treatment of infections caused by these multiresistant Gram-positive pathogens. PMID:17646087

  8. Partial Excision of the Chromosomal Cassette Containing the Methicillin Resistance Determinant Results in Methicillin-Susceptible Staphylococcus aureus

    PubMed Central

    Donnio, Pierre-Yves; Oliveira, Duarte C.; Faria, Nuno A.; Wilhelm, Nathalie; Le Coustumier, Alain; de Lencastre, Herminia

    2005-01-01

    We report a detailed characterization of methicillin-susceptible Staphylococcus aureus isolates from five French hospitals negative for both the mecA and the ccrAB loci but positive for the IS431::pUB110::IS431::dcs structure, present in some Staphylococcus cassette chromosome mec (SCCmec) types. The presence of SCCmec-associated elements suggests that this unusual resistant phenotype is due to a partial excision of SCCmec from epidemic methicillin-resistant S. aureus. The hypothesis of a genetic relatedness is strengthened by common sequence and spa types and similar susceptibility patterns. PMID:16081974

  9. Resistance of non-transgenic papaya plants to papaya ringspot virus (PRSV) mediated by intron-containing hairpin dsRNAs expressed in bacteria.

    PubMed

    Shen, W; Yang, G; Chen, Y; Yan, P; Tuo, D; Li, X; Zhou, P

    2014-01-01

    RNA-mediated virus resistance based on natural antiviral RNA silencing has been exploited as a powerful tool for engineering virus resistance in plants. In this study, a conserved 3'-region (positions 9839-10117, 279 nt) of the capsid protein (CP) gene of papaya ringspot virus (PRSV), designated CP279, was used to generate an intron-containing hairpin RNA (ihpRNA) construct by one-step, zero-background ligation-independent cloning (OZ-LIC). The RNaseIII-deficient Escherichia coli strain M-JM109lacY was identified as the best choice for producing large quantities of specific ihpRNA-CP279. Resistance analyses and ELISA data verified that most papaya plants mechanically co-inoculated with TRIzol-extracted ihpRNA-CP279 and PRSV were resistant to PRSV, and resistance was maintained throughout the test period (>2 months post-inoculation). In contrast, a 1-2 day interval between sequential inoculation of PRSV and ihpRNA-CP279 did not result in complete protection against PRSV infection, but delayed the appearance of viral symptoms by 3 to 4 days. These findings indicate that direct mechanical inoculation of papaya plants with bacterially-expressed ihpRNA-CP279 targeting the PRSV CP gene can interfere with virus infection. This work lays a foundation for developing a non-transgenic approach to control PRSV by directly spraying plants with ihpRNA or crude bacterial extract preparations. PMID:25283861

  10. Low Frequency of Drug-Resistant Variants Selected by Long-Acting Rilpivirine in Macaques Infected with Simian Immunodeficiency Virus Containing HIV-1 Reverse Transcriptase

    PubMed Central

    Melody, Kevin; McBeth, Sarah; Kline, Christopher; Kashuba, Angela D. M.; Mellors, John W.

    2015-01-01

    Preexposure prophylaxis (PrEP) using antiretroviral drugs is effective in reducing the risk of human immunodeficiency virus type 1 (HIV-1) infection, but adherence to the PrEP regimen is needed. To improve adherence, a long-acting injectable formulation of the nonnucleoside reverse transcriptase (RT) inhibitor rilpivirine (RPV LA) has been developed. However, there are concerns that PrEP may select for drug-resistant mutations during preexisting or breakthrough infections, which could promote the spread of drug resistance and limit options for antiretroviral therapy. To address this concern, we administered RPV LA to macaques infected with simian immunodeficiency virus containing HIV-1 RT (RT-SHIV). Peak plasma RPV levels were equivalent to those reported in human trials and waned over time after dosing. RPV LA resulted in a 2-log decrease in plasma viremia, and the therapeutic effect was maintained for 15 weeks, until plasma drug concentrations dropped below 25 ng/ml. RT mutations E138G and E138Q were detected in single clones from plasma virus in separate animals only at one time point, and no resistance mutations were detected in viral RNA isolated from tissues. Wild-type and E138Q RT-SHIV displayed similar RPV susceptibilities in vitro, whereas E138G conferred 2-fold resistance to RPV. Overall, selection of RPV-resistant variants was rare in an RT-SHIV macaque model despite prolonged exposure to slowly decreasing RPV concentrations following injection of RPV LA. PMID:26438501

  11. Low Frequency of Drug-Resistant Variants Selected by Long-Acting Rilpivirine in Macaques Infected with Simian Immunodeficiency Virus Containing HIV-1 Reverse Transcriptase.

    PubMed

    Melody, Kevin; McBeth, Sarah; Kline, Christopher; Kashuba, Angela D M; Mellors, John W; Ambrose, Zandrea

    2015-12-01

    Preexposure prophylaxis (PrEP) using antiretroviral drugs is effective in reducing the risk of human immunodeficiency virus type 1 (HIV-1) infection, but adherence to the PrEP regimen is needed. To improve adherence, a long-acting injectable formulation of the nonnucleoside reverse transcriptase (RT) inhibitor rilpivirine (RPV LA) has been developed. However, there are concerns that PrEP may select for drug-resistant mutations during preexisting or breakthrough infections, which could promote the spread of drug resistance and limit options for antiretroviral therapy. To address this concern, we administered RPV LA to macaques infected with simian immunodeficiency virus containing HIV-1 RT (RT-SHIV). Peak plasma RPV levels were equivalent to those reported in human trials and waned over time after dosing. RPV LA resulted in a 2-log decrease in plasma viremia, and the therapeutic effect was maintained for 15 weeks, until plasma drug concentrations dropped below 25 ng/ml. RT mutations E138G and E138Q were detected in single clones from plasma virus in separate animals only at one time point, and no resistance mutations were detected in viral RNA isolated from tissues. Wild-type and E138Q RT-SHIV displayed similar RPV susceptibilities in vitro, whereas E138G conferred 2-fold resistance to RPV. Overall, selection of RPV-resistant variants was rare in an RT-SHIV macaque model despite prolonged exposure to slowly decreasing RPV concentrations following injection of RPV LA. PMID:26438501

  12. The role of the healthcare environment in the spread of multidrug-resistant organisms: update on current best practices for containment

    PubMed Central

    Simmons, Sarah; Dale, Charles; Ghantoji, Shashank S.; Rodriguez, Maria; Gubb, Julie; Stachowiak, Julie; Stibich, Mark

    2014-01-01

    The role of the environment in harboring and transmitting multidrug-resistant organisms has become clearer due to a series of publications linking environmental contamination with increased risk of hospital-associated infections. The incidence of antimicrobial resistance is also increasing, leading to higher morbidity and mortality associated with hospital-associated infections. The purpose of this review is to evaluate the evidence supporting the existing methods of environmental control of organisms: environmental disinfection, contact precautions, and hand hygiene. These methods have been routinely employed, but transmission of multidrug-resistant organisms continues to occur in healthcare facilities throughout the country and worldwide. Several new technologies have entered the healthcare market that have the potential to close this gap and enhance the containment of multidrug-resistant organisms: improved chemical disinfection, environmental monitoring, molecular epidemiology, self-cleaning surfaces, and automated disinfection systems. A review of the existing literature regarding these interventions is provided. Overall, the role of the environment is still underestimated and new techniques may be required to mitigate the role that environmental transmission plays in acquisition of multidrug-resistant organisms. PMID:25469234

  13. 1994 Accident sequence precursor program results

    SciTech Connect

    Belles, R.J.; Cletcher, J.W.; Copinger, D.A.

    1996-01-01

    The Accident Sequence Precursor (ASP) Program involves the systematic review and evaluation of operational events that have occurred at light-water reactors to identify and categorize precursors to potential severe core damage accident sequences. The results of the ASP Program are published in an annual report. The most recent report, which contains the analyses of the precursors for 1994, is NUREG/CR-4674, Vols. 21 and 22, Precursors to Potential Severe Core Damage Accidents: 1994, A Status Report, published in December 1995. This article provides an overview of the ASP review and evaluation process and a summary of the results for 1994. 12 refs., 2 figs., 4 tabs.

  14. 1995 Accident Sequence Precursor (ASP) Program results

    SciTech Connect

    Muhlheim, M.D.; Belles, R.J.; Cletcher, J.W.; Copinger, D.A.; O`Reilly, P.D.; Dolan, B.W.; Minarick, J.W.

    1997-01-01

    The Accident Sequence Precursor (ASP) Program involves the systematic review and evaluation of operational events that have occurred at light-water reactors to identify and categorize precursors to potential severe core damage accident sequences. The results of the ASP Program are published in an annual report. The most recent report, which contains the precursors for 1995, is NUREG/CR-4674, Volume 23, Precursors to Potential Severe Core Damage Accidents: 1995, A Status Report, published in April 1997. This article provides an overview of the ASP review and evaluation process and a summary of the results for 1995.

  15. Reaction Products of Unsaturated Polycarboxylic Acids and Sodium Hypophosphite for Improved Flame Resistance of Cotton-Containing Materials

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Reaction products of unsaturated polycarboxylic acids and sodium hypophosite were found to improve flame resistance of cellulosic materials as determined by the 45 degree flammability test for apparel textiles. The most effective product was that from the reaction of maleic acid with sodium hypopho...

  16. Competitive Between Phytophthora Infestans Effectors Leads to Increased Aggressiveness on Plants Containing Broad-Spectrum Late Blight Resistance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Potato late blight is a particularly destructive plant disease caused by the oomycete pathogen Phytophthora infestans (Mont.) de Bary. Late blight has remained particularly problematic despite intensive breeding efforts to integrate resistance into cultivated potato. This is due to the pathogen’s ab...

  17. Acoustic and resistivity measurements on rock samples containing tetrahydrofuran hydrates: Laboratory analogues to natural gas hydrate deposits

    NASA Astrophysics Data System (ADS)

    Pearson, C.; Murphy, J.; Hermes, R.

    1986-12-01

    In this paper we report laboratory acoustic velocity and electrical resistivity measurements on Berea Sandstone and Austin Chalk samples saturated with a stoichiometric mixture of tetrahydrofuran (THF) and water. THF and water is an excellent experimental analogue to natural gas hydrates because THF solutions form hydrates similar to natural gas hydrates readily at atmospheric pressures. Hydrate formation in both the chalk and sandstone samples increased the acoustic P wave velocities by more than 80% when hydrates formed in the pore spaces; however, the velocities soon plateaued and further lowering the temperature did not appreciably increase the velocity. In contrast, the electrical resistivity increased nearly 2 orders of magnitude upon hydrate formation and continued to increase slowly as the temperature was decreased. In all cases resistivities were nearly frequency independent to 30 kHz, and the loss tangents were high, always greater than 5. The dielectric loss showed a linear decrease with frequency suggesting that ionic conduction through a brine phase dominates at all frequencies, even when the pores are nearly filled with hydrates. We find that resistivities were strongly a function of the dissolved salt content of the pore water. Pore water salinity also influenced the sonic velocity, but this effect is much smaller and only important near the hydrate formation temperature.

  18. New Breeding Parents Containing Novel QTL for Rice Sheath Blight Resistance Identified by Combining Phenotypic and Molecular Characterizations

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Rice Sheath Blight (SB) disease, caused by the necrotrophic Rhizoctonia solani Kühn, is a global and annual cause of rice yield losses. Several QTL with small individual impact must be combined to create rice varieties tolerant of SB infection because no single gene confers complete resistance. Mo...

  19. A study on microstructure and corrosion resistance of ZrO2-containing PEO coatings formed on AZ31 Mg alloy in phosphate-based electrolyte

    NASA Astrophysics Data System (ADS)

    Zhuang, J. J.; Guo, Y. Q.; Xiang, N.; Xiong, Y.; Hu, Q.; Song, R. G.

    2015-12-01

    ZrO2-containing ceramic coatings formed on the AZ31 Mg alloy were fabricated in an alkaline electrolyte containing sodium phosphate and potassium fluorozirconate (K2ZrF6) by plasma electrolytic oxidation (PEO). X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) techniques were used to study the phase structure and composition of the coatings. It is indicated that the coatings formed in the K2ZrF6-containing electrolyte were composed of MgO, MgF2 and t-ZrO2. Morphological investigation carried out by scanning electron microscopy (SEM) and stereoscopic microscopy, revealed that the uniformity of coatings increased and roughness of coatings decreased after the addition of K2ZrF6. Electrochemical investigation was achieved by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) test. The results showed that the PEO coating formed in K2ZrF6-containing electrolyte exhibited an improved corrosion resistance than that of the coating formed in K2ZrF6-free electrolyte. In addition, the polarization and EIS tests results both showed that the suitable concentration (2.5 g/l) of K2ZrF6 is of significant ability to improve the corrosion resistance of coatings. However, 5 g/l and 10 g/l K2ZrF6 has a negative effect on improving the corrosion resistance of PEO coatings compared with the coating formed in 2.5 g/l K2ZrF6-containing electrolyte.

  20. Analysis of Magnaporthe oryzae Genome Reveals a Fungal Effector, Which Is Able to Induce Resistance Response in Transgenic Rice Line Containing Resistance Gene, Pi54

    PubMed Central

    Ray, Soham; Singh, Pankaj K.; Gupta, Deepak K.; Mahato, Ajay K.; Sarkar, Chiranjib; Rathour, Rajeev; Singh, Nagendra K.; Sharma, Tilak R.

    2016-01-01

    Rice blast caused by Magnaporthe oryzae is one of the most important diseases of rice. Pi54, a rice gene that imparts resistance to M. oryzae isolates prevalent in India, was already cloned but its avirulent counterpart in the pathogen was not known. After decoding the whole genome of an avirulent isolate of M. oryzae, we predicted 11440 protein coding genes and then identified four candidate effector proteins which are exclusively expressed in the infectious structure, appresoria. In silico protein modeling followed by interaction analysis between Pi54 protein model and selected four candidate effector proteins models revealed that Mo-01947_9 protein model encoded by a gene located at chromosome 4 of M. oryzae, interacted best at the Leucine Rich Repeat domain of Pi54 protein model. Yeast-two-hybrid analysis showed that Mo-01947_9 protein physically interacts with Pi54 protein. Nicotiana benthamiana leaf infiltration assay confirmed induction of hypersensitive response in the presence of Pi54 gene in a heterologous system. Genetic complementation test also proved that Mo-01947_9 protein induces avirulence response in the pathogen in presence of Pi54 gene. Here, we report identification and cloning of a new fungal effector gene which interacts with blast resistance gene Pi54 in rice. PMID:27551285

  1. Analysis of Magnaporthe oryzae Genome Reveals a Fungal Effector, Which Is Able to Induce Resistance Response in Transgenic Rice Line Containing Resistance Gene, Pi54.

    PubMed

    Ray, Soham; Singh, Pankaj K; Gupta, Deepak K; Mahato, Ajay K; Sarkar, Chiranjib; Rathour, Rajeev; Singh, Nagendra K; Sharma, Tilak R

    2016-01-01

    Rice blast caused by Magnaporthe oryzae is one of the most important diseases of rice. Pi54, a rice gene that imparts resistance to M. oryzae isolates prevalent in India, was already cloned but its avirulent counterpart in the pathogen was not known. After decoding the whole genome of an avirulent isolate of M. oryzae, we predicted 11440 protein coding genes and then identified four candidate effector proteins which are exclusively expressed in the infectious structure, appresoria. In silico protein modeling followed by interaction analysis between Pi54 protein model and selected four candidate effector proteins models revealed that Mo-01947_9 protein model encoded by a gene located at chromosome 4 of M. oryzae, interacted best at the Leucine Rich Repeat domain of Pi54 protein model. Yeast-two-hybrid analysis showed that Mo-01947_9 protein physically interacts with Pi54 protein. Nicotiana benthamiana leaf infiltration assay confirmed induction of hypersensitive response in the presence of Pi54 gene in a heterologous system. Genetic complementation test also proved that Mo-01947_9 protein induces avirulence response in the pathogen in presence of Pi54 gene. Here, we report identification and cloning of a new fungal effector gene which interacts with blast resistance gene Pi54 in rice. PMID:27551285

  2. Genetic characterization of three qnrS1-harbouring multidrug-resistance plasmids and qnrS1-containing transposons circulating in Ho Chi Minh City, Vietnam

    PubMed Central

    Le, Vien; Nhu, Nguyen Thi Khanh; Cerdeno-Tarraga, Ana; Campbell, James I.; Tuyen, Ha Thanh; Nhu, Tran Do Hoang; Tam, Pham Thi Thanh; Schultsz, Constance; Thwaites, Guy; Thomson, Nicholas R.

    2015-01-01

    Plasmid-mediated quinolone resistance (PMQR) refers to a family of closely related genes that confer decreased susceptibility to fluoroquinolones. PMQR genes are generally associated with integrons and/or plasmids that carry additional antimicrobial resistance genes active against a range of antimicrobials. In Ho Chi Minh City (HCMC), Vietnam, we have previously shown a high frequency of PMQR genes within commensal Enterobacteriaceae. However, there are limited available sequence data detailing the genetic context in which the PMQR genes reside, and a lack of understanding of how these genes spread across the Enterobacteriaceae. Here, we aimed to determine the genetic background facilitating the spread and maintenance of qnrS1, the dominant PMQR gene circulating in HCMC. We sequenced three qnrS1-carrying plasmids in their entirety to understand the genetic context of these qnrS1-embedded plasmids and also the association of qnrS1-mediated quinolone resistance with other antimicrobial resistance phenotypes. Annotation of the three qnrS1-containing plasmids revealed a qnrS1-containing transposon with a closely related structure. We screened 112 qnrS1-positive commensal Enterobacteriaceae isolated in the community and in a hospital in HCMC to detect the common transposon structure. We found the same transposon structure to be present in 71.4 % (45/63) of qnrS1-positive hospital isolates and in 36.7 % (18/49) of qnrS1-positive isolates from the community. The resulting sequence analysis of the qnrS1 environment suggested that qnrS1 genes are widely distributed and are mobilized on elements with a common genetic background. Our data add additional insight into mechanisms that facilitate resistance to multiple antimicrobials in Gram-negative bacteria in Vietnam. PMID:26272054

  3. Diets Containing α-Linolenic (ω3) or Oleic (ω9) Fatty Acids Rescues Obese Mice From Insulin Resistance.

    PubMed

    Oliveira, V; Marinho, R; Vitorino, D; Santos, G A; Moraes, J C; Dragano, N; Sartori-Cintra, A; Pereira, L; Catharino, R R; da Silva, A S R; Ropelle, E R; Pauli, J R; De Souza, C T; Velloso, L A; Cintra, D E

    2015-11-01

    Subclinical systemic inflammation is a hallmark of obesity and insulin resistance. The results obtained from a number of experimental studies suggest that targeting different components of the inflammatory machinery may result in the improvement of the metabolic phenotype. Unsaturated fatty acids exert antiinflammatory activity through several distinct mechanisms. Here, we tested the capacity of ω3 and ω9 fatty acids, directly from their food matrix, to exert antiinflammatory activity through the G protein-coupled receptor (GPR)120 and GPR40 pathways. GPR120 was activated in liver, skeletal muscle, and adipose tissues, reverting inflammation and insulin resistance in obese mice. Part of this action was also mediated by GPR40 on muscle, as a novel mechanism described. Pair-feeding and immunoneutralization experiments reinforced the pivotal role of GPR120 as a mediator in the response to the nutrients. The improvement in insulin sensitivity in the high-fat substituted diets was associated with a marked reduction in tissue inflammation, decreased macrophage infiltration, and increased IL-10 levels. Furthermore, improved glucose homeostasis was accompanied by the reduced expression of hepatic gluconeogenic enzymes and reduced body mass. Thus, our data indicate that GPR120 and GPR40 play a critical role as mediators of the beneficial effects of dietary unsaturated fatty acids in the context of obesity-induced insulin resistance. PMID:26280128

  4. Visualization of Traffic Accidents

    NASA Technical Reports Server (NTRS)

    Wang, Jie; Shen, Yuzhong; Khattak, Asad

    2010-01-01

    Traffic accidents have tremendous impact on society. Annually approximately 6.4 million vehicle accidents are reported by police in the US and nearly half of them result in catastrophic injuries. Visualizations of traffic accidents using geographic information systems (GIS) greatly facilitate handling and analysis of traffic accidents in many aspects. Environmental Systems Research Institute (ESRI), Inc. is the world leader in GIS research and development. ArcGIS, a software package developed by ESRI, has the capabilities to display events associated with a road network, such as accident locations, and pavement quality. But when event locations related to a road network are processed, the existing algorithm used by ArcGIS does not utilize all the information related to the routes of the road network and produces erroneous visualization results of event locations. This software bug causes serious problems for applications in which accurate location information is critical for emergency responses, such as traffic accidents. This paper aims to address this problem and proposes an improved method that utilizes all relevant information of traffic accidents, namely, route number, direction, and mile post, and extracts correct event locations for accurate traffic accident visualization and analysis. The proposed method generates a new shape file for traffic accidents and displays them on top of the existing road network in ArcGIS. Visualization of traffic accidents along Hampton Roads Bridge Tunnel is included to demonstrate the effectiveness of the proposed method.

  5. Road accidents caused by drivers falling asleep.

    PubMed

    Sagberg, F

    1999-11-01

    About 29600 Norwegian accident-involved drivers received a questionnaire about the last accident reported to their insurance company. About 9200 drivers (31%) returned the questionnaire. The questionnaire contained questions about sleep or fatigue as contributing factors to the accident. In addition, the drivers reported whether or not they had fallen asleep some time whilst driving. and what the consequences had been. Sleep or drowsiness was a contributing factor in 3.9% of all accidents, as reported by drivers who were at fault for the accident. This factor was strongly over-represented in night-time accidents (18.6%), in running-off-the-road accidents (8.3%), accidents after driving more than 150 km on one trip (8.1%), and personal injury accidents (7.3%). A logistic regression analysis showed that the following additional factors made significant and independent contributions to increasing the odds of sleep involvement in an accident: dry road, high speed limit, driving one's own car, not driving the car daily, high education, and few years of driving experience. More male than female drivers were involved in sleep-related accidents, but this seems largely to be explained by males driving relatively more than females on roads with high speed limits. A total of 10% of male drivers and 4% of females reported to have fallen asleep while driving during the last 12 months. A total of 4% of these events resulted in an accident. The most frequent consequence of falling asleep--amounting to more than 40% of the reported incidents--was crossing of the right edge-line before awaking, whereas crossing of the centreline was reported by 16%. Drivers' lack of awareness of important precursors of falling asleep--like highway hypnosis, driving without awareness, and similar phenomena--as well as a reluctance to discontinue driving despite feeling tired are pointed out as likely contributors to sleep-related accidents. More knowledge about the drivers' experiences immediately

  6. Analysis of Healing Effect of Alginate Sulfate Hydrogel Dressing Containing Antimicrobial Peptide on Wound Infection Caused by Methicillin-Resistant Staphylococcus aureus

    PubMed Central

    Babavalian, Hamid; Latifi, Ali Mohammad; Shokrgozar, Mohammad Ali; Bonakdar, Shahin; Mohammadi, Sajjad; Moosazadeh Moghaddam, Mehrdad

    2015-01-01

    Background: Wound infections caused by methicillin-resistant Staphylococcus aureus are a health problem worldwide; therefore, it is necessary to develop new antimicrobial compounds. Considering broad-spectrum antimicrobial activity and low probability of drug resistance to peptides, applications these peptides are being studied extensively. Objectives: In this study, to control drug release over time, an alginate sulfate-based hydrogel impregnated with the CM11 peptide as the antimicrobial agent was developed, and its healing effects were tested on skin infections caused by methicillin-resistant S. aureus strains in a mouse model. Materials and Methods: Minimum inhibitory and minimum bactericidal concentrations of the CM11 peptide and alginate hydrogel in combination with the peptide were determined. Forty mice were divided into 4 groups: 1 group as a negative control (without treatment; however, 5 mice received hydrogel dressing without peptide), 1 group as a positive control (2% mupirocin treatment), and 2 groups as test groups. To establish skin infection, 200 μL of bacterial suspension with 3 × 108 CFU/mL concentration was subcutaneously injected in the scapular region of the mice. On the basis of the in vitro minimal bactericidal concentration of the alginate hydrogel containing peptide for 15 clinical isolates, hydrogel containing 128 mg/L of peptide was used for wound dressing over an 8-day period. Results: The highest and lowest numbers of wounds were observed on day 2 in the negative and positive control groups, respectively. During the 8-day period, the positive control and hydrogel containing peptide treatment groups showed similar levels of wound healing. Conclusions: This study showed that compared to standard drug treatment, treatment with hydrogel containing peptide had substantial antibacterial effects on S. aureus wound infections in mice. PMID:26487923

  7. A novel route for synthesis of UV-resistant hydrophobic titania-containing silica aerogels by using potassium titanate as precursor.

    PubMed

    Wei, Wei; Lü, Xiaomeng; Jiang, Deli; Yan, Zaoxue; Chen, Min; Xie, Jimin

    2014-07-01

    Developing a novel and facile way to synthesize composite aerogels plays an important role in the applications of aerogels. UV-resistant hydrophobic titania-containing silica aerogels are prepared for the first time using potassium titanate as precursor by a modified ambient pressure drying method. The well established silica-titania networks, which can be tuned from 10 to 30 nm by adjusting the precursor content in the preparation process, provide effective confinement of spherical solid clusters. The UV-resistant hydrophobic composite aerogels show excellent photocatalytic dye degradation activity under visible light irradiation. This can be ascribed to the insert of suitable titania into the silica organizational structure. The present work gives a promising method of one pot synthesis and surface modification of aerogel composite structures, which have a broader application as photocatalyst. PMID:24825183

  8. Laser accidents: Being Prepared

    SciTech Connect

    Barat, K

    2003-01-24

    The goal of the Laser Safety Officer and any laser safety program is to prevent a laser accident from occurring, in particular an injury to a person's eyes. Most laser safety courses talk about laser accidents, causes, and types of injury. The purpose of this presentation is to present a plan for safety offices and users to follow in case of accident or injury from laser radiation.

  9. Learning lessons from Natech accidents - the eNATECH accident database

    NASA Astrophysics Data System (ADS)

    Krausmann, Elisabeth; Girgin, Serkan

    2016-04-01

    When natural hazards impact industrial facilities that house or process hazardous materials, fires, explosions and toxic releases can occur. This type of accident is commonly referred to as Natech accident. In order to prevent the recurrence of accidents or to better mitigate their consequences, lessons-learned type studies using available accident data are usually carried out. Through post-accident analysis, conclusions can be drawn on the most common damage and failure modes and hazmat release paths, particularly vulnerable storage and process equipment, and the hazardous materials most commonly involved in these types of accidents. These analyses also lend themselves to identifying technical and organisational risk-reduction measures that require improvement or are missing. Industrial accident databases are commonly used for retrieving sets of Natech accident case histories for further analysis. These databases contain accident data from the open literature, government authorities or in-company sources. The quality of reported information is not uniform and exhibits different levels of detail and accuracy. This is due to the difficulty of finding qualified information sources, especially in situations where accident reporting by the industry or by authorities is not compulsory, e.g. when spill quantities are below the reporting threshold. Data collection has then to rely on voluntary record keeping often by non-experts. The level of detail is particularly non-uniform for Natech accident data depending on whether the consequences of the Natech event were major or minor, and whether comprehensive information was available for reporting. In addition to the reporting bias towards high-consequence events, industrial accident databases frequently lack information on the severity of the triggering natural hazard, as well as on failure modes that led to the hazmat release. This makes it difficult to reconstruct the dynamics of the accident and renders the development of

  10. Cholera in Vietnam: changes in genotypes and emergence of class I integrons containing aminoglycoside resistance gene cassettes in vibrio cholerae O1 strains isolated from 1979 to 1996.

    PubMed

    Dalsgaard, A; Forslund, A; Tam, N V; Vinh, D X; Cam, P D

    1999-03-01

    The number of cholera cases and the mortality rates reported from different regions of Vietnam varied considerably in the period from 1979 to 1996, with between 2,500 and 6,000 cases reported annually from 1992 to 1995. Annual mortality rates ranged from 2.0 to 9.6% from 1979 to 1983 to less than 1.8% after 1983. Major cholera outbreaks were reported from the High Plateau region for the first time in 1994 and 1995; this is an area with limited access to health services and safe drinking-water supplies. All cases were associated with Vibrio cholerae O1. Using ribotyping, cholera toxin (CT) genotyping, and characterization of antibiotic susceptibility patterns and antibiotic resistance genes by PCR, we show that strains isolated after 1990 were clearly different from strains isolated before 1991. In contrast to strains isolated before 1991, 94% of 104 strains isolated after 1990 showed an identical ribotype R1, were resistant to sulfamethoxazole and streptomycin, and showed a different CT genotype. Furthermore, PCR analysis revealed that sulfamethoxazole-resistant strains harbored class I integrons containing a gene cassette ant(3")-1a encoding resistance to streptomycin and spectinomycin. This is, to our knowledge, the first report of class I integrons in V. cholerae. The development of cholera and the changes in the phenotypic and genotypic properties of V. cholerae O1 shown in the present study highlight the importance of monitoring V. cholerae O1 in Vietnam as in other parts of the world. In particular, the emergence of the new ribotype R1 strain containing class I integrons should be further studied. PMID:9986842

  11. Accident mortality among children

    PubMed Central

    Swaroop, S.; Albrecht, R. M.; Grab, B.

    1956-01-01

    The authors present statistics on mortality from accidents, with special reference to those relating to the age-group 1-19 years. For a number of countries figures are given for the proportional mortality from accidents (the number of accident deaths expressed as a percentage of the number of deaths from all causes) and for the specific death-rates, per 100 000 population, from all causes of death, from selected causes, from all causes of accidents, and from various types of accident. From these figures it appears that, in most countries, accidents are becoming relatively increasingly prominent as a cause of death in childhood, primarily because of the conquest of other causes of death—such as infectious and parasitic diseases, which formerly took a heavy toll of children and adolescents—but also to some extent because the death-rate from motor-vehicle accidents is rising and cancelling out the reduction in the rate for other causes of accidental death. In the authors' opinion, further epidemiological investigations into accident causation are required for the purpose of devising quicker and more effective methods of accident prevention. PMID:13383361

  12. Inonotus obliquus containing diet enhances the innate immune mechanism and disease resistance in olive flounder Paralichythys olivaceus against Uronema marinum.

    PubMed

    Harikrishnan, Ramasamy; Balasundaram, Chellam; Heo, Moon-Soo

    2012-06-01

    The present study describes the effect of diet supplementation with Chaga mushroom, Inonotus obliquus extract at 0%, 0.01%, 0.1%, and 1.0% levels on the innate humoral (lysozyme, antiprotease, and complement), cellular responses (production of reactive oxygen and nitrogen species and myeloperoxidase), and disease resistance in olive flounder, Paralichythys olivaceus against Uronema marinum. The lysozyme activity and complement activity significantly increased in each diet on weeks 2 and 4 against pathogen. The serum antiprotease activity and reactive nitrogen intermediates production significantly increased in fish fed with 0.1% and 1.0% diets from weeks 1-4. However, reactive oxygen species production and myeloperoxidase activity significantly increased in 1.0% and 2.0% diets on weeks 2 and 4. In fish fed with 0.1% and 1.0% diets and challenged with U. marinum the cumulative mortality was 50% and 40% while in 0% and 0.01% diets the mortality was 85% and 55%. The results clearly indicate that supplementation diet with I. obliquus at 0.1% and 1.0% level positively enhance the immune system and confer disease resistance which may be potentially used as an immunoprophylactic in finfish culture. PMID:22484608

  13. Efficacy of spray formulations containing binary mixtures of clove and eucalyptus oils against susceptible and pyrethroid/ malathion-resistant head lice (Anoplura: Pediculidae).

    PubMed

    Choi, Han-Young; Yang, Young-Cheol; Lee, Si Hyeock; Clark, J Marshall; Ahn, Young-Joon

    2010-05-01

    The control efficacy of clove, Eugenia caryophyllata, and eucalyptus, Eucalyptus globulus, essential oils and 15 formulations containing these essential oils alone (8, 12, and 15% sprays) and their binary mixtures (7:3, 5:5, and 3:7 by weight) against adult females of insecticide-susceptible KR-HL and dual malathion- and permethrin-resistant BR-HL strains of head louse, Pediculus humanus capitis (De Geer), was examined by using contact plus fumigant and human hair wig (placed over the head of mannequin) mortality bioassays. In contact plus fumigant mortality bioassay, essential oils from eucalyptus (0.225 mg/cm2) and clove (1.149 mg/cm2) were less effective than either d-phenothrin (0.0029 mg/cm2) or pyrethrum (0.0025 mg/cm2) based on 6-h median lethal concentration values. However, the efficacies of eucalyptus and clove oils were almost identical against females fromn both strains, despite high levels of resistance of the BR-HL females to d-phenothrin (resistance ratio, 667) and pyrethrum (resistance ratio, 754). In human hair wig mortality bioassay, eucalyptus oil spray treatment gave better control efficacy than either spray treatment with clove oil alone or their binary mixtures. Thus, eucalyptus applied as 8% sprays (15 or 20 ml) appears to provide effective protection against pediculosis even to insecticide-resistant head louse populations. Once the safety issues resolved, covering the treated hair and scalp with bath shower cap or hat would ensure the fumigant action of the essential oil. PMID:20496586

  14. Dolutegravir-Selected HIV-1 Containing the N155H and R263K Resistance Substitutions Does Not Acquire Additional Compensatory Mutations under Drug Pressure That Lead to Higher-Level Resistance and Increased Replicative Capacity

    PubMed Central

    Anstett, Kaitlin; Fusco, Robert; Cutillas, Vincent; Mesplède, Thibault

    2015-01-01

    ABSTRACT We have previously shown that the addition of the raltegravir/elvitegavir (RAL/EVG) primary resistance mutation N155H to the R263K dolutegravir (DTG) resistance mutation partially compensated for the fitness cost imposed by R263K while also slightly increasing DTG resistance in vitro (K. Anstett, T. Mesplede, M. Oliveira, V. Cutillas, and M. A. Wainberg, J Virol 89:4681–4684, 2015, doi:10.1128/JVI.03485-14). Since many patients failing RAL/EVG are given DTG as part of rescue therapy, and given that the N155H substitution often is found in combination with other compensatory resistance mutations in such individuals, we investigated the effects of multiple such substitutions within integrase (IN) on each of integrase function, HIV-1 infectivity, and levels of drug resistance. To this end, each of the L74M, E92Q, T97A, E157Q, and G163R substitutions were introduced into NL4.3 subtype B HIV-1 vectors harboring N155H and R263K in tandem [termed NL4.3IN(N155H/R263K)]. Relevant recombinant integrase enzymes also were expressed, and purified and biochemical assays of strand transfer efficiency as well as viral infectivity and drug resistance studies were performed. We found that the addition of T97A, E157Q, or G163R somewhat improved the affinity of INN155H/R263K for its target DNA substrate, while the presence of L74M or E92Q had a negative effect on this process. However, viral infectivity was significantly decreased from that of NL4.3IN(N155H/R263K) after the addition of each tertiary mutation, and no increases in levels of DTG resistance were observed. This work shows that the compensatory mutations that evolve after N155H under continued DTG or RAL/EVG pressure in patients are unable to improve either enzyme efficiency or viral infectivity in an N155H/R263K background. IMPORTANCE In contrast to other drugs, dolutegravir has not selected for resistance in HIV-positive individuals when used in first-line therapy. We had previously shown that HIV containing

  15. Review of models applicable to accident aerosols

    SciTech Connect

    Glissmeyer, J.A.

    1983-07-01

    Estimations of potential airborne-particle releases are essential in safety assessments of nuclear-fuel facilities. This report is a review of aerosol behavior models that have potential applications for predicting aerosol characteristics in compartments containing accident-generated aerosol sources. Such characterization of the accident-generated aerosols is a necessary step toward estimating their eventual release in any accident scenario. Existing aerosol models can predict the size distribution, concentration, and composition of aerosols as they are acted on by ventilation, diffusion, gravity, coagulation, and other phenomena. Models developed in the fields of fluid mechanics, indoor air pollution, and nuclear-reactor accidents are reviewed with this nuclear fuel facility application in mind. The various capabilities of modeling aerosol behavior are tabulated and discussed, and recommendations are made for applying the models to problems of differing complexity.

  16. Resistance of Coatings for Boiler Components of Waste-to-Energy Plants to Salt Melts Containing Copper Compounds

    NASA Astrophysics Data System (ADS)

    Galetz, Mathias Christian; Bauer, Johannes Thomas; Schütze, Michael; Noguchi, Manabu; Cho, Hiromitsu

    2013-06-01

    The accelerating effect of heavy metal compounds on the corrosive attack of boiler components like superheaters poses a severe problem in modern waste-to-energy plants (WTPs). Coatings are a possible solution to protect cheap, low alloyed steel substrates from heavy metal chloride and sulfate salts, which have a relatively low melting point. These salts dissolve many alloys, and therefore often are the limiting factor as far as the lifetime of superheater tubes is concerned. In this work the corrosion performance under artificial salt deposits of different coatings, manufactured by overlay welding, thermal spraying of self-fluxing as well as conventional systems was investigated. The results of our studies clearly demonstrate the importance of alloying elements such as molybdenum or silicon. Additionally, the coatings have to be dense and of a certain thickness in order to resist the corrosive attack under these severe conditions.

  17. A dimer of BPV-1 E2 containing a protease resistant core interacts with its DNA target.

    PubMed Central

    Dostatni, N; Thierry, F; Yaniv, M

    1988-01-01

    The E2 proteins encoded by papillomaviruses interact with the viral DNA to regulate its transcription. In the present study, we have constructed bacterial vectors expressing the full-length or N-terminal truncated BPV-1 E2 proteins under the control of an inducible promoter. By UV cross-linking experiments we show that a dimer of the intact or truncated E2 protein interacts with a single palindromic site ACCGNNNNCGGT. The DNA-binding domain of E2 can be reduced to a small protease resistant core. Methylation interference studies show that this C-terminal domain interacts with the major groove of the DNA by contacting two consecutive guanine residues in both halves of the palindrome. Although one binding site is sufficient for high affinity binding in vitro or in vivo, two E2 binding sites are required for transcriptional activation in eukaryotic cells. Images PMID:2850174

  18. Fluorine-containing composition for forming anti-reflection film on resist surface and pattern formation method

    DOEpatents

    Nishi, Mineo; Makishima, Hideo

    1996-01-01

    A composition for forming anti-reflection film on resist surface which comprises an aqueous solution of a water soluble fluorine compound, and a pattern formation method which comprises the steps of coating a photoresist composition on a substrate; coating the above-mentioned composition for forming anti-reflection film; exposing the coated film to form a specific pattern; and developing the photoresist, are provided. Since the composition for forming anti-reflection film can be coated on the photoresist in the form of an aqueous solution, not only the anti-reflection film can be formed easily, but also, the film can be removed easily by rinsing with water or alkali development. Therefore, by the pattern formation method according to the present invention, it is possible to form a pattern easily with a high dimensional accuracy.

  19. A dimer of BPV-1 E2 containing a protease resistant core interacts with its DNA target.

    PubMed

    Dostatni, N; Thierry, F; Yaniv, M

    1988-12-01

    The E2 proteins encoded by papillomaviruses interact with the viral DNA to regulate its transcription. In the present study, we have constructed bacterial vectors expressing the full-length or N-terminal truncated BPV-1 E2 proteins under the control of an inducible promoter. By UV cross-linking experiments we show that a dimer of the intact or truncated E2 protein interacts with a single palindromic site ACCGNNNNCGGT. The DNA-binding domain of E2 can be reduced to a small protease resistant core. Methylation interference studies show that this C-terminal domain interacts with the major groove of the DNA by contacting two consecutive guanine residues in both halves of the palindrome. Although one binding site is sufficient for high affinity binding in vitro or in vivo, two E2 binding sites are required for transcriptional activation in eukaryotic cells. PMID:2850174

  20. World commercial aircraft accidents: 1st edition, 1946--1991

    SciTech Connect

    Kimura, C.Y.

    1992-02-01

    This report is a compilation of all accidents world-wide involving aircraft in commercial service which resulted in the loss of the airframe or one or more fatality, or both. This information has been gathered in order to present a complete inventory of commercial aircraft accidents. Events involving military action, sabotage, terrorist bombings, hijackings, suicides, and industrial ground accidents are included within this list. This report is organized into six chapters. The first chapter is the introduction. The second chapter contains the compilation of accidents involving world commercial jet aircraft from 1952 to 1991. The third chapter presents a compilation of accidents involving world commercial turboprop aircraft from 1952 to 1991. The fourth chapter presents a compilation of accidents involving world commercial pistonprop aircraft with four or more engines from 1946 to 1991. Each accident compilation or database in chapters two, three and four is presented in chronological order. Each accident is presented with information the following categories: date of accident, airline or operator and its flight number (if known), type of flight, type of aircraft and model, aircraft registration number, construction number/manufacturers serial number, aircraft damage resulting from accident, accident flight phase, accident location, number of fatalities, number of occupants, references used to compile the information, and finally cause, remarks, or description (brief) of the accident. The fifth chapter presents a list of all commercial aircraft accidents for all aircraft types with 100 or more fatalities in order of decreasing number of fatalities. Chapter six presents the commercial aircraft accidents for all aircraft types by flight phase. Future editions of this report will have additional follow-on chapters which will present other studies still in preparation at the time this edition was being prepared.

  1. Performance of Sequoyah Containment Anchorage System

    SciTech Connect

    Fanous, F.; Greimann, L.; Wassef, W.; Bluhm, D.

    1993-01-01

    Deformation of a steel containment anchorage system during a severe accident may result in a leakage path at the containment boundaries. Current design criteria are based on either ductile or brittle failure modes of headed bolts that do not account for factors such as cracking of the containment basemat or deformation of the anchor bolt that may affect the behavior of the containment anchorage system. The purpose of this study was to investigate the performance of a typical ice condenser containment`s anchorage system. This was accomplished by analyzing the Sequoyah Containment Anchorage System. Based on a strength of materials approach and assuming that the anchor bolts are resisting the uplift caused by the internal pressure, one can estimate that the failure of the anchor bolts would occur at a containment pressure of 79 psig. To verify these results and to calibrate the strength of materials equation, the Sequoyah containment anchorage system was analyzed with the ABAQUS program using a three-dimensional, finite-element model. The model included portions of the steel containment building, shield building, anchor bolt assembly, reinforced concrete mat and soil foundation material.

  2. New Real-Time PCR Assay for Rapid Detection of Methicillin- Resistant Staphylococcus aureus Directly from Specimens Containing a Mixture of Staphylococci

    PubMed Central

    Huletsky, A.; Giroux, R.; Rossbach, V.; Gagnon, M.; Vaillancourt, M.; Bernier, M.; Gagnon, F.; Truchon, K.; Bastien, M.; Picard, F. J.; van Belkum, A.; Ouellette, M.; Roy, P. H.; Bergeron, M. G.

    2004-01-01

    Molecular methods for the rapid identification of methicillin-resistant Staphylococcus aureus (MRSA) are generally based on the detection of an S. aureus-specific gene target and the mecA gene. However, such methods cannot be applied for the direct detection of MRSA from nonsterile specimens such as nasal samples without the previous isolation, capture, or enrichment of MRSA because these samples often contain both coagulase-negative staphylococci (CoNS) and S. aureus, either of which can carry mecA. In this study, we describe a real-time multiplex PCR assay which allows the detection of MRSA directly from clinical specimens containing a mixture of staphylococci in <1 h. Five primers specific to the different staphylococcal cassette chromosome mec (SCCmec) right extremity sequences, including three new sequences, were used in combination with a primer and three molecular beacon probes specific to the S. aureus chromosomal orfX gene sequences located to the right of the SCCmec integration site. Of the 1,657 MRSA isolates tested, 1,636 (98.7%) were detected with the PCR assay, whereas 26 of 569 (4.6%) methicillin-susceptible S. aureus (MSSA) strains were misidentified as MRSA. None of the 62 nonstaphylococcal bacterial species or the 212 methicillin-resistant or 74 methicillin-susceptible CoNS strains (MRCoNS and MSCoNS, respectively) were detected by the assay. The amplification of MRSA was not inhibited in the presence of high copy numbers of MSSA, MRCoNS, or MSCoNS. The analytical sensitivity of the PCR assay, as evaluated with MRSA-negative nasal specimens containing a mixture of MSSA, MRCoNS, and MSCoNS spiked with MRSA, was ∼25 CFU per nasal sample. This real-time PCR assay represents a rapid and powerful method which can be used for the detection of MRSA directly from specimens containing a mixture of staphylococci. PMID:15131143

  3. Airline accident response.

    PubMed

    Bettes, Thomas

    2002-01-01

    This article outlines government regulations affecting accident response and offers guidelines for airline contingency plans in the face of major air disasters, such as those encountered on September 11, 2001. The author also touches upon the role of the corporate medical department in accident investigation and victim identification. PMID:11872433

  4. Civil aircraft accident investigation.

    PubMed

    Haines, Daniel

    2013-01-01

    This talk reviews some historic aircraft accidents and some more recent. It reflects on the division of accident causes, considering mechanical failures and aircrew failures, and on aircrew training. Investigation results may lead to improved aircraft design, and to appropriate crew training. PMID:24057309

  5. Anatomy of an Accident.

    ERIC Educational Resources Information Center

    Mobley, Michael

    1984-01-01

    The findings of industrial safety engineers in the areas of accident causation and prevention are wholly applicable to adventure programs. Adventure education instructors can use safety engineering concepts to assess the risk in a particular activity, understand factors that cause accidents, and intervene to minimize injuries and damages if…

  6. Inhibition of Src homology 2 domain-containing phosphatase 1 increases insulin sensitivity in high-fat diet-induced insulin-resistant mice.

    PubMed

    Krüger, Janine; Wellnhofer, Ernst; Meyborg, Heike; Stawowy, Philipp; Östman, Arne; Kintscher, Ulrich; Kappert, Kai

    2016-03-01

    Insulin resistance plays a crucial role in the development of type 2 diabetes. Insulin receptor signalling is antagonized and tightly controlled by protein tyrosine phosphatases (PTPs). However, the precise role of the PTP src homology 2 domain-containing phosphatase 1 (SHP-1) in insulin resistance has not been explored. Male C57BL/6J mice were fed a high-fat diet (HFD, 60% kcal from fat), to induce insulin resistance, or a low-fat diet (LFD, 10% kcal from fat) for 10 weeks. Afterwards, HFD-fed mice were pharmacologically treated with the SHP-1 (Ptpn6) inhibitor sodium stibogluconate and the broad spectrum pan-PTP inhibitor bis(maltolato)oxovanadium(IV) (BMOV). Both inhibitors ameliorated the metabolic phenotype, as evidenced by reduced body weight, improved insulin sensitivity and glucose tolerance, which was not due to altered PTP gene expression. In parallel, phosphorylation of the insulin receptor and of the insulin signalling key intermediate Akt was enhanced, and both PTP inhibitors and siRNA-mediated SHP-1 downregulation resulted in an increased glucose uptake in vitro. Finally, recombinant SHP-1 was capable of dephosphorylating the ligand-induced tyrosine-phosphorylated insulin receptor. These results indicate a central role of SHP-1 in insulin signalling during obesity, and SHP-1 inhibition as a potential therapeutic approach in metabolic diseases. PMID:27047746

  7. Characterization of Klebsiella sp. strain 10982, a colonizer of humans that contains novel antibiotic resistance alleles and exhibits genetic similarities to plant and clinical Klebsiella isolates.

    PubMed

    Hazen, Tracy H; Zhao, LiCheng; Sahl, Jason W; Robinson, Gwen; Harris, Anthony D; Rasko, David A; Johnson, J Kristie

    2014-01-01

    A unique Klebsiella species strain, 10982, was cultured from a perianal swab specimen obtained from a patient in the University of Maryland Medical Center intensive care unit. Klebsiella sp. 10982 possesses a large IncA/C multidrug resistance plasmid encoding a novel FOX AmpC β-lactamase designated FOX-10. A novel variant of the LEN β-lactamase was also identified. Genome sequencing and bioinformatic analysis demonstrated that this isolate contains genes associated with nitrogen fixation, allantoin metabolism, and citrate fermentation. These three gene regions are typically present in either Klebsiella pneumoniae clinical isolates or Klebsiella nitrogen-fixing endophytes but usually not in the same organism. Phylogenomic analysis of Klebsiella sp. 10982 and sequenced Klebsiella genomes demonstrated that Klebsiella sp. 10982 is present on a branch that is located intermediate between the genomes of nitrogen-fixing endophytes and K. pneumoniae clinical isolates. Metabolic features identified in the genome of Klebsiella sp. 10982 distinguish this isolate from other Klebsiella clinical isolates. These features include the nitrogen fixation (nif) gene cluster, which is typically present in endophytic Klebsiella isolates and is absent from Klebsiella clinical isolates. Additionally, the Klebsiella sp. 10982 genome contains genes associated with allantoin metabolism, which have been detected primarily in K. pneumoniae isolates from liver abscesses. Comparative genomic analysis of Klebsiella sp. 10982 demonstrated that this organism has acquired genes conferring new metabolic strategies and novel antibiotic resistance alleles, both of which may enhance its ability to colonize the human body. PMID:24395222

  8. The origin of high electrolyte-electrode interfacial resistances in lithium cells containing garnet type solid electrolytes.

    PubMed

    Cheng, Lei; Crumlin, Ethan J; Chen, Wei; Qiao, Ruimin; Hou, Huaming; Franz Lux, Simon; Zorba, Vassilia; Russo, Richard; Kostecki, Robert; Liu, Zhi; Persson, Kristin; Yang, Wanli; Cabana, Jordi; Richardson, Thomas; Chen, Guoying; Doeff, Marca

    2014-09-14

    Dense LLZO (Al-substituted Li7La3Zr2O12) pellets were processed in controlled atmospheres to investigate the relationships between the surface chemistry and interfacial behavior in lithium cells. Laser induced breakdown spectroscopy (LIBS), scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, synchrotron X-ray photoelectron spectroscopy (XPS) and soft X-ray absorption spectroscopy (XAS) studies revealed that Li2CO3 was formed on the surface when LLZO pellets were exposed to air. The distribution and thickness of the Li2CO3 layer were estimated by a combination of bulk and surface sensitive techniques with various probing depths. First-principles thermodynamic calculations confirmed that LLZO has an energetic preference to form Li2CO3 in air. Exposure to air and the subsequent formation of Li2CO3 at the LLZO surface is the source of the high interfacial impedances observed in cells with lithium electrodes. Surface polishing can effectively remove Li2CO3 and dramatically improve the interfacial properties. Polished samples in lithium cells had an area specific resistance (ASR) of only 109 Ω cm(2) for the LLZO/Li interface, the lowest reported value for Al-substituted LLZO. Galvanostatic cycling results obtained from lithium symmetrical cells also suggest that the quality of the LLZO/lithium interface has a significant impact on the device lifetime. PMID:25057850

  9. Electrical resistance tomography for real-time mapping of the solid-liquid interface in tanks containing optically opaque fluids

    NASA Astrophysics Data System (ADS)

    Madupu, Amar; Mazumdar, Anindra; Zhang, Jinsong; Roelant, David; Srivastava, Rajiv

    2005-03-01

    The visualization of settled solid layers in vessels have many applications, of interest here is for facilitating the efficient retrieval of high-level radioactive waste (HLW) from underground storage tanks at Department of Energy sites. Visualization of the solids interface with opaque liquid above can"t be accomplished by regular optical imaging methods and hence our interest in using Electrical Resistance Tomography (ERT). The ideal arrangement for 3-D ERT imaging inside tanks is to use a multiple ring electrode system, which is complex and expensive. This research describes ERT imaging done with a single linear array as a benchmark study to ascertain the viability of its imaging of the interface. Experiments focused upon systematic analysis of many ERT tomograms of two simple settled solids layers (horizontal, 30o) using pulverized kaolin clay (10μdia) and water. Visualization was done using commercial ERT software. Injection current and electrode orientation were the two system parameters varied and analyzed. Reproducibility, accuracy and reliability of this ERT system will be presented.

  10. Sonic and resistivity measurements on Berea sandstone containing tetrahydrofuran hydrates: a possible analogue to natural-gas-hydrate deposits. [Tetrahydrofuran hydrates

    SciTech Connect

    Pearson, C.; Murphy, J.; Halleck, P.; Hermes, R.; Mathews, M.

    1983-01-01

    Deposits of natural gas hydrates exist in arctic sedimentary basins and in marine sediments on continental slopes and rises. However, the physical properties of such sediments are largely unknown. In this paper, we report laboratory sonic and resistivity measurements on Berea sandstone cores saturated with a stoichiometric mixture of tetrahydrofuran (THF) and water. We used THF as the guest species rather than methane or propane gas because THF can be mixed with water to form a solution containing proportions of the proper stoichiometric THF and water. Because neither methane nor propane is soluble in water, mixing the guest species with water sufficiently to form solid hydrate is difficult. Because THF solutions form hydrates readily at atmospheric pressure it is an excellent experimental analogue to natural gas hydrates. Hydrate formation increased the sonic P-wave velocities from a room temperature value of 2.5 km/s to 4.5 km/s at -5/sup 0/C when the pores were nearly filled with hydrates. Lowering the temperature below -5/sup 0/C did not appreciably change the velocity however. In contrast, the electrical resistivity increases nearly two orders of magnitude upon hydrate formation and continues to increase more slowly as the temperature is further decreased. In all cases the resistivities are nearly frequency independent to 30 kHz and the loss tangents are high, always greater than 5. The dielectric loss shows a linear decrease with frequency suggesting that ionic conduction through a brine phase dominates at all frequencies, even when the pores are nearly filled with hydrates. We find that the resistivities are strongly a function of the dissolved salt content of the pore water. Pore water salinity also influences the sonic velocity, but this effect is much smaller and only important near the hydrate formation temperature.

  11. Aib-containing analogues of the insect kinin neuropeptide family demonstrate resistance to an insect angiotensin-converting enzyme and potent diuretic activity.

    PubMed

    Nachman, R J; Isaac, R E; Coast, G M; Holman, G M

    1997-01-01

    Analogues of the insect kinin family in which the Xaa2 residue of the C-terminal pentapeptide core sequence Phe-Xaa1-Xaa2-Trp-Gly-NH2 (Xaa1 = Asn, His, Phe, Ser, or Tyr; Xaa2 = Ala, Ser, or Pro) is replaced with sterically hindered aminoisobutyric acid (Aib) prove to be resistant to hydrolysis by housefly (Musca domestica) angiotensin-converting enzyme (ACE), an endopeptidase capable of hydrolysis and inactivation of the naturally occurring insect kinin peptides. The Aib residue is compatible with formation of turn in the active core region that is important for the biological activity of the insect kinins. One of the Aib-containing analogues, pGlu-Lys-Phe-Phe-Aib-Trp-Gly-NH2, is five- and eightfold more active than the most active endogenous insect kinins in cockroach (Leucophaea maderae) hindgut myotropic and cricket (Acheta domesticus) Malpighian tubule fluid secretion assays, respectively. As the analogue is blocked at both the amino- and the carboxyl-terminus and resistant to an endopeptidase present in insects, it is better adapted than the endogenous peptides to survive for long periods in the hemolymph. Enzyme-resistant insect kinin analogues can provide useful tools to insect researchers studying the neuroendocrine control of water and ion balance and the physiological consequences of challenging insect with diuretic factors that demonstrate enhanced resistance to peptidase attack. If these analogues, whether in isolation or in combination with other factors, can disrupt the water and/or ion balance they hold potential utility for the control of pest insect populations in the future. PMID:9114452

  12. Corrosion resistance of weldable super 13Cr stainless steel in H{sub 2}S containing CO{sub 2} environments

    SciTech Connect

    Ueda, M.; Amaya, H.; Kondo, K.; Ogawa, K.; Mori, T.

    1996-08-01

    The weldable super 13Cr stainless steel was investigated because of the application for flow line in CO{sub 2} environments with a little amount of H{sub 2}S. TIG welding in the condition of no post weld heat treatment (PWHT) was used as the welding technique. The lowering of C content less than 0.01 mass% in the weldable steel decreased a maximum hardness in the heat-affected zone(HAZ) and mitigated the sulfide stress cracking (SSC) susceptibility. The increasing of Mo content from 2.0 mass% of the super 13Cr stainless steel OCTG (0.02C-12Cr-5.5Ni-2Mo) to 2.5 mass% improved SSC resistance in the HAZ. Based on these results, the weldable super 13Cr stainless steel, which consisted of 0.007C-12Cr-6Ni-2.5Mo-Ti, has been developed. The welded-joint with the yield strength of 550 MPa (80 ksi) and enough corrosion resistance was completed by using the welding material of super duplex stainless steel which had 25Cr-9Ni-3Mo-2W-0.3N. The corrosion resistance to SSC at room temperatures and localized-corrosion at elevated temperatures of the welded-joint was the same as the super 13Cr stainless steel OCTG. The improvement effect of the corrosion resistance by means of Mo addition was discussed based on the stability of Cr oxide passive film, the analysis results of the surface film formed in the CO{sub 2} environment containing H{sub 2}S, and calculated-solubility of oxides, FeCO{sub 3} and sulfides in that environment. It was clarified that Mo assisted the formation of the Cr oxide passive film in the inner layer of the surface film and the formation of Mo sulfide in the outer layer.

  13. COMMERCIAL SNF ACCIDENT RELEASE FRACTIONS

    SciTech Connect

    S.O. Bader

    1999-10-18

    The purpose of this design analysis is to specify and document the total and respirable fractions for radioactive materials that are released from an accident event at the Monitored Geologic Repository (MGR) involving commercial spent nuclear fuel (CSNF) in a dry environment. The total and respirable release fractions will be used to support the preclosure licensing basis for the MGR. The total release fraction is defined as the fraction of total CSNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. The radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses. This subset of the total release fraction is referred to as the respirable release fraction. Potential accidents may involve waste forms that are characterized as either bare (unconfined) fuel assemblies or confined fuel assemblies. The confined CSNF assemblies at the MGR are contained in shipping casks, canisters, or disposal containers (waste packages). In contrast to the bare fuel assemblies, the container that confines the fuel assemblies has the potential of providing an additional barrier for diminishing the total release fraction should the fuel rod cladding breach during an accident. However, this analysis will not take credit for this additional bamer and will establish only the total release fractions for bare unconfined CSNF assemblies, which may however be

  14. Persistence of airline accidents.

    PubMed

    Barros, Carlos Pestana; Faria, Joao Ricardo; Gil-Alana, Luis Alberiko

    2010-10-01

    This paper expands on air travel accident research by examining the relationship between air travel accidents and airline traffic or volume in the period from 1927-2006. The theoretical model is based on a representative airline company that aims to maximise its profits, and it utilises a fractional integration approach in order to determine whether there is a persistent pattern over time with respect to air accidents and air traffic. Furthermore, the paper analyses how airline accidents are related to traffic using a fractional cointegration approach. It finds that airline accidents are persistent and that a (non-stationary) fractional cointegration relationship exists between total airline accidents and airline passengers, airline miles and airline revenues, with shocks that affect the long-run equilibrium disappearing in the very long term. Moreover, this relation is negative, which might be due to the fact that air travel is becoming safer and there is greater competition in the airline industry. Policy implications are derived for countering accident events, based on competition and regulation. PMID:20618386

  15. Sleep related vehicle accidents.

    PubMed Central

    Horne, J. A.; Reyner, L. A.

    1995-01-01

    OBJECTIVES--To assess the incidence, time of day, and driver morbidity associated with vehicle accidents where the most likely cause was the driver falling asleep at the wheel. DESIGN--Two surveys were undertaken, in southwest England and the midlands, by using police databases or on the spot interviews. SUBJECTS--Drivers involved in 679 sleep related vehicle accidents. RESULTS--Of all vehicle accidents to which the police were summoned, sleep related vehicle accidents comprised 16% on major roads in southwest England, and over 20% on midland motorways. During the 24 hour period there were three major peaks: at around 0200, 0600, and 1600. About half these drivers were men under 30 years; few such accidents involved women. CONCLUSIONS--Sleep related vehicle accidents are largely dependent on the time of day and account for a considerable proportion of vehicle accidents, especially those on motorways and other monotonous roads. As there are no norms for the United Kingdom on road use by age and sex for time of day with which to compare these data, we cannot determine what the hourly exposure v risk factors are for these subgroups. The findings are in close agreement with those from other countries. PMID:7888930

  16. ACCIDENT, ILLNESS AND INJURY AND EMPLOYMENT SELF-EXTRACTING FILES

    EPA Science Inventory

    Files containing information of accidents, illnesses and injuries of miners. These "self-extracting" files are the actual information (raw data) from the accident and injury MSHA Form 7000-2 filed with MSHA by mining operators and contractors as required under the 30 CFR Part 50.

  17. CONTAIN independent peer review

    SciTech Connect

    Boyack, B.E.; Corradini, M.L.; Denning, R.S.; Khatib-Rahbar, M.; Loyalka, S.K.; Smith, P.N.

    1995-01-01

    The CONTAIN code was developed by Sandia National Laboratories under the sponsorship of the US Nuclear Regulatory Commission (NRC) to provide integrated analyses of containment phenomena. It is used to predict nuclear reactor containment loads, radiological source terms, and associated physical phenomena for a range of accident conditions encompassing both design-basis and severe accidents. The code`s targeted applications include support for containment-related experimental programs, light water and advanced light water reactor plant analysis, and analytical support for resolution of specific technical issues such as direct containment heating. The NRC decided that a broad technical review of the code should be performed by technical experts to determine its overall technical adequacy. For this purpose, a six-member CONTAIN Peer Review Committee was organized and a peer review as conducted. While the review was in progress, the NRC issued a draft ``Revised Severe Accident Code Strategy`` that incorporated revised design objectives and targeted applications for the CONTAIN code. The committee continued its effort to develop findings relative to the original NRC statement of design objectives and targeted applications. However, the revised CONTAIN design objectives and targeted applications. However, the revised CONTAIN design objectives and targeted applications were considered by the Committee in assigning priorities to the Committee`s recommendations. The Committee determined some improvements are warranted and provided recommendations in five code-related areas: (1) documentation, (2) user guidance, (3) modeling capability, (4) code assessment, and (5) technical assessment.

  18. Effect of Rosiglitazone and Metformin on Insulin Resistance in Patients Infected with Human Immunodeficiency Virus Receiving Highly Active Antiretroviral Therapy Containing Protease Inhibitor: Randomized Prospective Controlled Clinical Trial

    PubMed Central

    Silič, Anja; Janež, Andrej; Tomažič, Janez; Karner, Primož; Vidmar, Ludvik; Sharma, Prem; Matičič, Mojca

    2007-01-01

    Aim To evaluate and compare effects of 48-week treatment with rosiglitazone and metformin on insulin resistance in patients infected with Human Immunodeficiency Virus (HIV) receiving highly active antiretroviral therapy (HAART), containing a protease inhibitor. Methods Randomized prospective controlled clinical trial enrolled 90 male patients infected with HIV and having impaired glucose tolerance and insulin resistance (fasting insulin concentration >20 mIU/L). The patients were randomly assigned into three groups (each 30 patients); the first group receiving 4 mg rosiglitazone once a day, the second group receiving 500 mg metformin two times a day, and the third group serving as control without hypoglycemic treatment. The primary efficacy parameters were fasting plasma glucose and insulin levels compared between baseline and week. Data on insulin resistance and beta cell function were analyzed by the Homeostasis Model Assessment (HOMA). Results After 48 weeks of treatment, the fasting insulin concentration (±standard deviation) in rosiglitazone group significantly declined from 39.0 ± 3.35 to 19.7 ± 3.99 mIU/L (P<0.001; 49% decrease) and in metformin group from 40.3 ± 2.29 to 29.2 ± 2.82 mIU/L (P<0.001; 27% decrease). HOMA indicated that rosiglitazone significantly reduced insulin resistance from 11.3 ± 1.03 to 4.0 ± 0.95 (P<0.001), compared with metformin which reduced it from 11.9 ± 0.73 to 5.7 ± 0.62 (P<0.001). Insulin resistance was significantly lower in the rosiglitazone group after 48 weeks (P<0.001). Metformin significantly improved beta cell function (from 257.3 ± 21.91 to 707.4 ± 207.32; P<0.001), as did rosiglitazone (from 261.3 ± 27.98 to 403.3 ± 162.50; P<0.001), but the improvement in the metformin group was significantly better (P<0.001). However, metformin was more efficient in improving beta cell function (from 257.3 ± 21.91 to 707.4 ± 207.32) than rosiglitazone (from 261.3

  19. Summary of a workshop on severe accident management for BWRs

    SciTech Connect

    Kastenberg, W.E.; Apostolakis, G.; Jae, M.; Milici, T.; Park, H.; Xing, L.; Dhir, V.K.; Lim, H.; Okrent, D.; Swider, J.; Yu, D.

    1991-11-01

    Severe accident management can be defined as the use of existing and/or alternative resources, systems and actions to prevent or mitigate a core-melt accident. For each accident sequence and each combination of strategies there may be several options available to the operator; and each involves phenomenological and operational considerations regarding uncertainty. Operational uncertainties include operator, system and instrument behavior during an accident. During the period September 26--28, 1990, a workshop was held at the University of California, Los Angeles, to address these uncertainties for Boiling Water Reactors (BWRs). This report contains a summary of the workshop proceedings.

  20. Silica and boron-containing ultraphosphate laser glass with low concentration quenching and improved thermal shock resistance

    DOEpatents

    Cook, Lee M.; Stokowski, Stanley E.

    1987-04-28

    Neodymium-doped phosphate glasses having a refractive index, nd>1.520; an Abbe number, Vd, <60; a density <3.0 g/cm.sup.3, a thermal expansion coefficient, .alpha., .ltoreq.110.times.10.sup.-7 .degree.C..sup.-1 ; a Young's Modulus, E, <70.times.10.sup.3 N/mm.sup.2 ; a Poisson's Ratio, .nu., <0.28; a thermal conductivity, K, >0.5 W/m.multidot.K, a thermal FOM=(1-.nu.).multidot.K/.alpha.E>0.7, consisting essentially of, in mol. %: P.sub.2 O.sub.5 : 40-70% SiO.sub.2 : 0-20% B.sub.2 O.sub.3 : 5-20% Sum SiO.sub.2 +B.sub.2 O.sub.3 : 5-35% Sum Li.sub.2 O+Na.sub.2 O+K.sub.2 O: 5-20% Sum La.sub.2 O.sub.3 +Nd.sub.2 O.sub.3 : 3-10% Sum MgO+CaO+SrO+BaO+ZnO: 0-10% and preferably containing an amount of Nd.sub.2 O.sub.3 effective for laser activity having an emission cross-section, .sigma., >3.5.times.10.sup.-20 cm.sup.2 ; a fluorescence linewidth (.DELTA..lambda..sub.f1)<23.5 nm; a first e-folding time of the Nd.sup.3+ fluorescence at 0.5 wt. % Nd.sub.2 O.sub.3 >375 .mu.sec, and a first e-folding time of the Nd.sup.3+ fluorescence at 10 wt. % >175 .mu.sec at 10 wt. %, have very low self-concentration quenching rates.

  1. Development of acid-resistant alginate/trimethyl chitosan nanoparticles containing cationic β-cyclodextrin polymers for insulin oral delivery.

    PubMed

    Mansourpour, Maryam; Mahjub, Reza; Amini, Mohsen; Ostad, Seyed Naser; Shamsa, Elnaz Sadat; Rafiee-Tehrani, Morteza; Dorkoosh, Farid Abedin

    2015-08-01

    In this study, the use of trimethylchitosan (TMC), by higher solubility in comparison with chitosan, in alginate/chitosan nanoparticles containing cationic β-cyclodextrin polymers (CPβCDs) has been studied, with the aim of increasing insulin uptake by nanoparticles. Firstly, TMCs were synthesized by iodomethane, and CPβCDs were synthesized within a one-step polycondensation reaction using choline chloride (CC) and epichlorohydrine (EP). Insulin-CβCDPs complex was prepared by mixing 1:1 portion of insulin and CPβCDs solutions. Then, nanoparticles prepared in a three-step procedure based on the iono-tropic pregelation method. Nanoparticles screened using experimental design and Placket Burman methodology to obtain minimum size and polydispercity index (pdI) and the highest entrapment efficiency (EE). CPβCDs and TMC solution concentration and pH and alginate and calcium chloride solution concentrations are found as the significant parameters on size, PdI, and EE. The nanoparticles with proper physicochemical properties were obtained; the size, PdI, and EE% of optimized nanoparticles were reported as 150.82 ± 21 nm, 0.362 ± 0.036, and 93.2% ± 4.1, respectively. The cumulative insulin release in intestinal condition achieved was 50.2% during 6 h. By SEM imaging, separate, spherical, and nonaggregated nanoparticles were found. In the cytotoxicity studies on Caco-2 cell culture, no significant cytotoxicity was observed in 5 h of incubation, but after 24 h of incubation, viability was decreased to 50% in 0.5 mμ of TMC concentration. Permeability studies across Caco-2 cells had been carried out, and permeability achieved in 240 min was 8.41 ± 0.39%, which shows noticeable increase in comparison with chitosan nanoparticles. Thus, according to the results, the optimized nanoparticles can be used as a new insulin oral delivery system. PMID:25604700

  2. Accident Prevention: A Workers' Education Manual.

    ERIC Educational Resources Information Center

    International Labour Office, Geneva (Switzerland).

    Devoted to providing industrial workers with a greater knowledge of precautionary measures undertaken and enforced by industries for the protection of workers, this safety education manual contains 14 lessons ranging from "The Problems of Accidents during Work" to "Trade Unions and Workers and Industrial Safety." Fire protection, safety equipment…

  3. Safety Is No Accident.

    ERIC Educational Resources Information Center

    Christiansen, Monty L.

    1985-01-01

    Liability suits involving accidents in park and recreation areas are expensive and intangible costs are incalculable. Risk management practices related to park planning, personnel, and administrative practices are discussed. (MT)

  4. A highly efficient silole-containing dithienylethene with excellent thermal stability and fatigue resistance: a promising candidate for optical memory storage materials.

    PubMed

    Chan, Jacky Chi-Hung; Lam, Wai Han; Yam, Vivian Wing-Wah

    2014-12-10

    Diarylethene compounds are potential candidates for applications in optical memory storage systems and photoswitchable molecular devices; however, they usually show low photocycloreversion quantum yields, which result in ineffective erasure processes. Here, we present the first highly efficient photochromic silole-containing dithienylethene with excellent thermal stability and fatigue resistance. The photochemical quantum yields for photocyclization and photocycloreversion of the compound are found to be high and comparable to each other; the latter of which is rarely found in diarylethene compounds. These would give rise to highly efficient photoswitchable material with effective writing and erasure processes. Incorporation of the silole moiety as a photochromic dithienylethene backbone also was demonstrated to enhance the thermal stability of the closed form, in which the thermal backward reaction to the open form was found to be negligible even at 100 °C, which leads to a promising candidate for use as photoswitchable materials and optical memory storage. PMID:25427229

  5. Expression of resistance to Friend virus-stimulated erythropoiesis in bone marrow chimeras containing Fv-2rr and Fv-2ss bone marrow

    SciTech Connect

    Silver, J.; Teich, N.

    1981-07-01

    Bone marrow chimeras were formed containing mixtures of DBA/2 (Fv-2ss, Hbbdd) and B10.D2 (Fv-2rr, Hbbss) bone marrow. When these mice were infected with the polycythemia-inducing strain of Friend virus, erythropoiesis was stimulated, but the proportion of B10.D2 hemoglobin fell rapidly and newly synthesized hemoglobin was essentially all of the DBA/2 type. The treatment of infected polycythemic chimeras with phenylhydrazine lowered the hematocrit and restored the synthesis of B10.D2 hemoglobin. These results imply that B10.D2 erythroid precursors are intrinsically resistant to Friend virus-stimulated erythropoiesis. The experiments also suggest that virus-stimulated erythropoiesis is not mediated by a factor or cell-cell interactions, unless such factors or interactions do not act across strain barriers.

  6. An AS1411 aptamer-conjugated liposomal system containing a bubble-generating agent for tumor-specific chemotherapy that overcomes multidrug resistance.

    PubMed

    Liao, Zi-Xian; Chuang, Er-Yuan; Lin, Chia-Chen; Ho, Yi-Cheng; Lin, Kun-Ju; Cheng, Po-Yuan; Chen, Ko-Jie; Wei, Hao-Ji; Sung, Hsing-Wen

    2015-06-28

    Recent research in chemotherapy has prioritized overcoming the multidrug resistance (MDR) of cancer cells. In this work, liposomes that contain doxorubicin (DOX) and ammonium bicarbonate (ABC, a bubble-generating agent) are prepared and functionalized with an antinucleolin aptamer (AS1411 liposomes) to target DOX-resistant breast cancer cells (MCF-7/ADR), which overexpress nucleolin receptors. Free DOX and liposomes without functionalization with AS1411 (plain liposomes) were used as controls. The results of molecular dynamic simulations suggest that AS1411 functionalization may promote the affinity and specific binding of liposomes to the nucleolin receptors, enhancing their subsequent uptake by tumor cells, whereas plain liposomes enter cells with difficulty. Upon mild heating, the decomposition of ABC that is encapsulated in the liposomes enables the immediate activation of generation of CO2 bubbles, creating permeable defects in their lipid bilayers, and ultimately facilitating the swift intracellular release of DOX. In vivo studies in nude mice that bear tumors demonstrate that the active targeting of AS1411 liposomes can substantially increase the accumulation of DOX in the tumor tissues relative to free DOX or passively targeted plain liposomes, inhibiting tumor growth and reducing systemic side effects, including cardiotoxicity. The above findings indicate that liposomes that are functionalized with AS1411 represent an attractive therapeutic alternative for overcoming the MDR effect, and support a potentially effective strategy for cancer therapy. PMID:25637705

  7. Cross-Institute Evaluations of Inhibitor-Resistant PCR Reagents for Direct Testing of Aerosol and Blood Samples Containing Biological Warfare Agent DNA

    PubMed Central

    Minogue, Timothy D.; Rachwal, Phillip A.; Trombley Hall, Adrienne; Koehler, Jeffery W.

    2014-01-01

    Rapid pathogen detection is crucial for the timely introduction of therapeutics. Two groups (one in the United Kingdom and one in the United States) independently evaluated inhibitor-resistant PCR reagents for the direct testing of substrates. In the United Kingdom, a multiplexed Bacillus anthracis (target) and Bacillus subtilis (internal-control) PCR was used to evaluate 4 reagents against 5 PCR inhibitors and down-selected the TaqMan Fast Virus 1-Step master mix (Life Technologies Inc.). In the United States, four real-time PCR assays (targeting B. anthracis, Brucella melitensis, Venezuelan equine encephalitis virus [VEEV], and Orthopoxvirus spp.) were used to evaluate 5 reagents (plus the Fast Virus master mix) against buffer, blood, and soil samples and down-selected the KAPA Blood Direct master mix (KAPA Biosystems Inc.) with added Platinum Taq (Life Technologies). The down-selected reagents underwent further testing. In the United Kingdom experiments, both reagents were tested against seven contrived aerosol collector samples containing B. anthracis Ames DNA and B. subtilis spores from a commercial formulation (BioBall). In PCR assays with reaction mixtures containing 40% crude sample, an airfield-collected sample induced inhibition of the B. subtilis PCR with the KAPA reagent and complete failure of both PCRs with the Fast Virus reagent. However, both reagents allowed successful PCR for all other samples—which inhibited PCRs with a non-inhibitor-resistant reagent. In the United States, a cross-assay limit-of-detection (LoD) study in blood was conducted. The KAPA Blood Direct reagent allowed the detection of agent DNA (by four PCRs) at higher concentrations of blood in the reaction mixture (2.5%) than the Fast Virus reagent (0.5%), although LoDs differed between assays and reagent combinations. Across both groups, the KAPA Blood Direct reagent was determined to be the optimal reagent for inhibition relief in PCR. PMID:24334660

  8. DOE SPENT NUCLEAR FUEL DISPOSAL CONTAINER

    SciTech Connect

    F. Habashi

    1998-06-26

    The DOE Spent Nuclear Fuel Disposal Container (SNF DC) supports the confinement and isolation of waste within the Engineered Barrier System of the Mined Geologic Disposal System (MGDS). Disposal containers are loaded and sealed in the surface waste handling facilities, transferred to the underground through the access mains, and emplaced in emplacement drifts. The DOE Spent Nuclear Fuel Disposal Container provides long term confinement of DOE SNF waste, and withstands the loading, transfer, emplacement, and retrieval loads and environments. The DOE SNF Disposal Containers provide containment of waste for a designated period of time, and limit radionuclide release thereafter. The disposal containers maintain the waste in a designated configuration, withstand maximum handling and rockfall loads, limit the individual waste canister temperatures after emplacement. The disposal containers also limit the introduction of moderator into the disposal container during the criticality control period, resist corrosion in the expected repository environment, and provide complete or limited containment of waste in the event of an accident. Multiple disposal container designs may be needed to accommodate the expected range of DOE Spent Nuclear Fuel. The disposal container will include outer and inner barrier walls and outer and inner barrier lids. Exterior labels will identify the disposal container and contents. Differing metal barriers will support the design philosophy of defense in depth. The use of materials with different failure mechanisms prevents a single mode failure from breaching the waste package. The corrosion-resistant inner barrier and inner barrier lid will be constructed of a high-nickel alloy and the corrosion-allowance outer barrier and outer barrier lid will be made of carbon steel. The DOE Spent Nuclear Fuel Disposal Containers interface with the emplacement drift environment by transferring heat from the waste to the external environment and by protecting

  9. 33 CFR 174.107 - Contents of casualty or accident report form.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Contents of casualty or accident... System Requirements § 174.107 Contents of casualty or accident report form. Each form for reporting a vessel casualty or accident must contain the information required in § 173.57 of this chapter....

  10. 33 CFR 174.107 - Contents of casualty or accident report form.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Contents of casualty or accident... System Requirements § 174.107 Contents of casualty or accident report form. Each form for reporting a vessel casualty or accident must contain the information required in § 173.57 of this chapter....

  11. New mobile gene cassettes containing an aminoglycoside resistance gene, aacA7, and a chloramphenicol resistance gene, catB3, in an integron in pBWH301.

    PubMed Central

    Bunny, K L; Hall, R M; Stokes, H W

    1995-01-01

    The multidrug resistance plasmid pBWH301 was shown to contain a sull-associated integron with five inserted gene cassettes, aacA7-catB3-aadB-oxa2-orfD, all of which can be mobilized by the integron-encoded DNA integrase. The aadB, oxa2, and orfD cassettes are identical to known cassettes. The aacA7 gene encodes a protein that is a member of one of the three known families of aminoglycoside acetyltransferases classified as AAC(6')-I. The chloramphenicol acetyltransferase encoded by the catB3 gene is closely related to members of a recently identified family of chloramphenicol acetyltransferases. The catB3 gene displays a relatively high degree of sequence identity to a chromosomally located open reading frame in Pseudomonas aeruginosa, and this may represent evidence for the acquisition by a cassette of a chromosomal gene. PMID:7793874

  12. Discovery of selective and noncovalent diaminopyrimidine-based inhibitors of epidermal growth factor receptor containing the T790M resistance mutation.

    PubMed

    Hanan, Emily J; Eigenbrot, Charles; Bryan, Marian C; Burdick, Daniel J; Chan, Bryan K; Chen, Yuan; Dotson, Jennafer; Heald, Robert A; Jackson, Philip S; La, Hank; Lainchbury, Michael D; Malek, Shiva; Purkey, Hans E; Schaefer, Gabriele; Schmidt, Stephen; Seward, Eileen M; Sideris, Steve; Tam, Christine; Wang, Shumei; Yeap, Siew Kuen; Yen, Ivana; Yin, Jianping; Yu, Christine; Zilberleyb, Inna; Heffron, Timothy P

    2014-12-11

    Activating mutations within the epidermal growth factor receptor (EGFR) kinase domain, commonly L858R or deletions within exon 19, increase EGFR-driven cell proliferation and survival and are correlated with impressive responses to the EGFR inhibitors erlotinib and gefitinib in nonsmall cell lung cancer patients. Approximately 60% of acquired resistance to these agents is driven by a single secondary mutation within the EGFR kinase domain, specifically substitution of the gatekeeper residue threonine-790 with methionine (T790M). Due to dose-limiting toxicities associated with inhibition of wild-type EGFR (wtEGFR), we sought inhibitors of T790M-containing EGFR mutants with selectivity over wtEGFR. We describe the evolution of HTS hits derived from Jak2/Tyk2 inhibitors into selective EGFR inhibitors. X-ray crystal structures revealed two distinct binding modes and enabled the design of a selective series of novel diaminopyrimidine-based inhibitors with good potency against T790M-containing mutants of EGFR, high selectivity over wtEGFR, broad kinase selectivity, and desirable physicochemical properties. PMID:25383627

  13. Discovery of Selective and Noncovalent Diaminopyrimidine-Based Inhibitors of Epidermal Growth Factor Receptor Containing the T790M Resistance Mutation

    PubMed Central

    2015-01-01

    Activating mutations within the epidermal growth factor receptor (EGFR) kinase domain, commonly L858R or deletions within exon 19, increase EGFR-driven cell proliferation and survival and are correlated with impressive responses to the EGFR inhibitors erlotinib and gefitinib in nonsmall cell lung cancer patients. Approximately 60% of acquired resistance to these agents is driven by a single secondary mutation within the EGFR kinase domain, specifically substitution of the gatekeeper residue threonine-790 with methionine (T790M). Due to dose-limiting toxicities associated with inhibition of wild-type EGFR (wtEGFR), we sought inhibitors of T790M-containing EGFR mutants with selectivity over wtEGFR. We describe the evolution of HTS hits derived from Jak2/Tyk2 inhibitors into selective EGFR inhibitors. X-ray crystal structures revealed two distinct binding modes and enabled the design of a selective series of novel diaminopyrimidine-based inhibitors with good potency against T790M-containing mutants of EGFR, high selectivity over wtEGFR, broad kinase selectivity, and desirable physicochemical properties. PMID:25383627

  14. [Psychogenesis of accidents].

    PubMed

    Giannattasio, E; Nencini, R; Nicolosi, N

    1988-01-01

    After having carried out a historical review of industrial psychology with specific attention to the evolution of the concept of causality in accidents, the Authors formulate their work hypothesis from that research which take into highest consideration the executives' attitudes in the genesis of the accidents. As dogmatism appears to be one of the most negative of executives' attitudes, the Authors administered Rockeach's Scale to 130 intermediate executives from 6 industries in Latium and observed the frequency index for accidents and the morbidity index (absenteeism) of the 2149 workhand. The Authors assumed that to high degree of dogmatism on the executives' side should correspond o a higher level of accidents and absenteeism among the staff. The data processing revealed that, due to the type of machinery employed, three of the industries examined should be considered as High Risk Industrie (HRI), while the remaining three could be considered as Low Risk Industries (LRI): in fact, due to the different working conditions, a significant lower number of accidents occurred in last the three. A statistically significant correlation between the executives' dogmatism and the number of accidents among their workhand in the HRI has been noticed, while this has not been observed in the LRI. This confirms, as had already been pointed out by Gemelli in 1944, that some "objective conditions" are requested so that the accident may actually take place. On the other hand the morbidity index has not shown any difference related to the different kind of industries (HRI, LRI): in both cases statistically significant correlations were obtained between the executives' dogmatism and the staff's absenteeism. absenteeism.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:3154344

  15. In Vitro Characterization of GS-8374, a Novel Phosphonate-Containing Inhibitor of HIV-1 Protease with a Favorable Resistance Profile ▿ †

    PubMed Central

    Callebaut, Christian; Stray, Kirsten; Tsai, Luong; Williams, Matt; Yang, Zheng-Yu; Cannizzaro, Carina; Leavitt, Stephanie A.; Liu, Xiaohong; Wang, Kelly; Murray, Bernard P.; Mulato, Andrew; Hatada, Marcos; Priskich, Tina; Parkin, Neil; Swaminathan, Swami; Lee, William; He, Gong-Xin; Xu, Lianhong; Cihlar, Tomas

    2011-01-01

    GS-8374 is a novel bis-tetrahydrofuran HIV-1 protease (PR) inhibitor (PI) with a unique diethylphosphonate moiety. It was selected from a series of analogs containing various di(alkyl)phosphonate substitutions connected via a linker to the para position of a P-1 phenyl ring. GS-8374 inhibits HIV-1 PR with high potency (Ki = 8.1 pM) and with no known effect on host proteases. Kinetic and thermodynamic analysis of GS-8374 binding to PR demonstrated an extremely slow off rate for the inhibitor and favorable contributions of both the enthalpic and entropic components to the total free binding energy. GS-8374 showed potent antiretroviral activity in T-cell lines, primary CD4+ T cells (50% effective concentration [EC50] = 3.4 to 11.5 nM), and macrophages (EC50 = 25.5 nM) and exhibited low cytotoxicity in multiple human cell types. The antiviral potency of GS-8374 was only moderately affected by human serum protein binding, and its combination with multiple approved antiretrovirals showed synergistic effects. When it was tested in a PhenoSense assay against a panel of 24 patient-derived viruses with high-level PI resistance, GS-8374 showed lower mean EC50s and lower fold resistance than any of the clinically approved PIs. Similar to other PIs, in vitro hepatic microsomal metabolism of GS-8374 was efficiently blocked by ritonavir, suggesting a potential for effective pharmacokinetic boosting in vivo. In summary, results from this broad in vitro pharmacological profiling indicate that GS-8374 is a promising candidate to be further assessed as a new antiretroviral agent with potential for clinical efficacy in both treatment-naïve and -experienced patients. PMID:21245449

  16. A Novel Bis-Tetrahydrofuranylurethane-Containing Nonpeptidic Protease Inhibitor (PI), GRL-98065, Is Potent Against Mulutiple-PI-Resistant Human Immunodeficiency Virus in Vitro

    SciTech Connect

    Amano,M.; Koh, Y.; Das, D.; Li, J.; Leschenko, S.; Wang, Y.; Boross, P.; Weber, I.; Ghosh, A.; Mitsuya, H.

    2007-01-01

    We designed, synthesized, and identified GRL-98065, a novel nonpeptidic human immunodeficiency virus type 1 (HIV-1) protease inhibitor (PI) containing the structure-based designed privileged cyclic ether-derived nonpeptide P2 ligand, 3(R),3a(S),6a(R)-bis-tetrahydrofuranylurethane (bis-THF), and a sulfonamide isostere, which is highly potent against laboratory HIV-1 strains and primary clinical isolates (50% effective concentration [EC{sub 50}], 0.0002 to 0.0005 {mu}M) with minimal cytotoxicity (50% cytotoxicity, 35.7 {mu}M in CD4{sup +} MT-2 cells). GRL-98065 blocked the infectivity and replication of each of the HIV-1{sub NL4-3} variants exposed to and selected by up to a 5 {mu}M concentration of saquinavir, indinavir, nelfinavir, or ritonavir and a 1 {mu}M concentration of lopinavir or atazanavir (EC{sub 50}, 0.0015 to 0.0075 {mu}M), although it was less active against HIV-1{sub NLV4-3} selected by amprenavir (EC{sub 50}, 0.032 {mu}M). GRL-98065 was also potent against multiple-PI-resistant clinical HIV-1 variants isolated from patients who had no response to existing antiviral regimens after having received a variety of antiviral agents, HIV-1 isolates of various subtypes, and HIV-2 isolates examined. Structural analyses revealed that the close contact of GRL-98065 with the main chain of the protease active-site amino acids (Asp29 and Asp30) is important for its potency and wide-spectrum activity against multiple-PI-resistant HIV-1 variants. The present data demonstrate that the privileged nonpeptide P2 ligand, bis-THF, is critical for the binding of GRL-98065 to the HIV protease substrate binding site and that this scaffold can confer highly potent antiviral activity against a wide spectrum of HIV isolates.

  17. Injuries are not accidents

    PubMed Central

    Gutiérrez, María Isabel

    2014-01-01

    Injuries are the result of an acute exposure to exhort of energy or a consequence of a deficiency in a vital element that exceeds physiological thresholds resulting threatens life. They are classified as intentional or unintentional. Injuries are considered a global health issue because they cause more than 5 million deaths per year worldwide and they are an important contributor to the burden of disease, especially affecting people of low socioeconomic status in low- and middle-income countries. A common misconception exists where injuries are thought to be the same as accidents; however, accidents are largely used as chance events, without taken in consideration that all these are preventable. This review discusses injuries and accidents in the context of road traffic and emphasizes injuries as preventable events. An understanding of the essence of injuries enables the standardization of terminology in public use and facilitates the development of a culture of prevention among all of us. PMID:25386040

  18. Accidents in Childhood

    PubMed Central

    Keddy, J. Arthur

    1964-01-01

    The causes of injury to 17,141 children brought to the emergency department of a large pediatric hospital in one year were studied. The leading causes of injury were: falls, 5682; cuts or piercings, 1902; poisonings, 1597; and transportation accidents, 1368. Included in these are 587 falls on or down stairs, 401 cuts due to glass, 630 poisonings from household or workshop substances, 510 poisonings from salicylate tablets, and 449 accidents involving bicycles or tricycles. Other findings included 333 injuries to fingers or hands in doors, usually car doors; 122 instances of pulled arms; 384 ingestions and 53 inhalations of foreign bodies; 60 alleged sexual assaults, 58 chemical burns, 127 wringer injuries, and four attempted suicides. A rewarding opportunity in accident prevention exists for hospitals that undertake to compile and distribute pertinent source data. PMID:14201260

  19. The Fukushima radiation accident: consequences for radiation accident medical management.

    PubMed

    Meineke, Viktor; Dörr, Harald

    2012-08-01

    The March 2011 radiation accident in Fukushima, Japan, is a textbook example of a radiation accident of global significance. In view of the global dimensions of the accident, it is important to consider the lessons learned. In this context, emphasis must be placed on consequences for planning appropriate medical management for radiation accidents including, for example, estimates of necessary human and material resources. The specific characteristics of the radiation accident in Fukushima are thematically divided into five groups: the exceptional environmental influences on the Fukushima radiation accident, particular circumstances of the accident, differences in risk perception, changed psychosocial factors in the age of the Internet and globalization, and the ignorance of the effects of ionizing radiation both among the general public and health care professionals. Conclusions like the need for reviewing international communication, interfacing, and interface definitions will be drawn from the Fukushima radiation accident. PMID:22951483

  20. t(11;18)(q21;q21)-positive advanced-stage MALT lymphoma associated with monoclonal gammopathy: resistance to rituximab or rituximab-containing chemotherapy.

    PubMed

    Ohno, Hitoshi; Isoda, Kotaro

    2008-11-01

    Here we describe two cases of mucosa-associated lymphoid tissue (MALT) lymphoma with monoclonal immunoglobulins (Igs). The first case was a 77-year-old man with primary lymphoma of the lung. Immunoelectrophoresis detected IgM-kappa in serum and kappa light chain excretion into urine. Three months after treatment with single-agent rituximab, a large amount of pleural fluid was found to have accumulated. The fluid contained CD5(-), CD10(-), CD19(+), CD38(+) and CD138(-/+) lymphoma cells with lymphoplasmacytoid appearance. Although a small fraction of the cells were CD20(+), the majority of the lymphoma cells were negative and expressed surface-membrane IgM-kappa at low levels. The cells possessed a karyotype of 46, XY, t(11;18)(q21;q21). The second case was a 55-year-old man who underwent total gastrectomy due to gastric perforation. Surgical specimens demonstrated the histopathological features of MALT lymphoma associated with plasma cell differentiation. The lymphoma cells had a 46, XY, t(11;18)(q21;q21) karyotype. Monoclonal Igs detected were serum IgA (M)-kappa and urinary kappa light chain. The patient was subsequently treated with six cycles of R-CVP (rituximab, cyclophosphamide, vincristine and prednisolone) ; however, serum monoclonal Ig levels were not affected. The lymphoma cells in both cases may have contained two populations, a rituximab-sensitive CD20(+) population and a rituximab-resistant population that had differentiated into the Ig-secreting plasma cell stage. PMID:19039196

  1. Overexpression of GmERF5, a new member of the soybean EAR motif-containing ERF transcription factor, enhances resistance to Phytophthora sojae in soybean.

    PubMed

    Dong, Lidong; Cheng, Yingxin; Wu, Junjiang; Cheng, Qun; Li, Wenbin; Fan, Sujie; Jiang, Liangyu; Xu, Zhaolong; Kong, Fanjiang; Zhang, Dayong; Xu, Pengfei; Zhang, Shuzhen

    2015-05-01

    Phytophthora root and stem rot of soybean [Glycine max (L.) Merr.], caused by Phytophthora sojae Kaufmann and Gerdemann, is a destructive disease throughout the soybean planting regions in the world. Here, we report insights into the function and underlying mechanisms of a novel ethylene response factor (ERF) in soybean, namely GmERF5, in host responses to P. sojae. GmERF5-overexpressing transgenic soybean exhibited significantly enhanced resistance to P. sojae and positively regulated the expression of the PR10, PR1-1, and PR10-1 genes. Sequence analysis suggested that GmERF5 contains an AP2/ERF domain of 58 aa and a conserved ERF-associated amphiphilic repression (EAR) motif in its C-terminal region. Following stress treatments, GmERF5 was significantly induced by P. sojae, ethylene (ET), abscisic acid (ABA), and salicylic acid (SA). The activity of the GmERF5 promoter (GmERF5P) was upregulated in tobacco leaves with ET, ABA, Phytophthora nicotianae, salt, and drought treatments, suggesting that GmERF5 could be involved not only in the induced defence response but also in the ABA-mediated pathway of salt and drought tolerance. GmERF5 could bind to the GCC-box element and act as a repressor of gene transcription. It was targeted to the nucleus when transiently expressed in Arabidopsis protoplasts. GmERF5 interacted with a basic helix-loop-helix transcription factor (GmbHLH) and eukaryotic translation initiation factor (GmEIF) both in yeast cells and in planta. To the best of our knowledge, GmERF5 is the first soybean EAR motif-containing ERF transcription factor demonstrated to be involved in the response to pathogen infection. PMID:25779701

  2. ANS severe accident program overview & planning document

    SciTech Connect

    Taleyarkhan, R.P.

    1995-09-01

    The Advanced Neutron Source (ANS) severe accident document was developed to provide a concise and coherent mechanism for presenting the ANS SAP goals, a strategy satisfying these goals, a succinct summary of the work done to date, and what needs to be done in the future to ensure timely licensability. Guidance was received from various bodies [viz., panel members of the ANS severe accident workshop and safety review committee, Department of Energy (DOE) orders, Nuclear Regulatory Commission (NRC) requirements for ALWRs and advanced reactors, ACRS comments, world-wide trends] were utilized to set up the ANS-relevant SAS goals and strategy. An in-containment worker protection goal was also set up to account for the routine experimenters and other workers within containment. The strategy for achieving the goals is centered upon closing the severe accident issues that have the potential for becoming certification issues when assessed against realistic bounding events. Realistic bounding events are defined as events with an occurrency frequency greater than 10{sup {minus}6}/y. Currently, based upon the level-1 probabilistic risk assessment studies, the realistic bounding events for application for issue closure are flow blockage of fuel element coolant channels, and rapid depressurization-related accidents.

  3. Containment atmosphere response to external sprays

    SciTech Connect

    Green, J.; Almenas, K.

    1995-09-01

    The application of external sprays to a containment steel shell can be an effective energy removal method and has been proposed in the passive AP-600 design. Reduction of the steel shell temperature in contact with the containment atmosphere enhances both heat and mass transfer driving forces. Large scale experimental data in this area is scarce, therefore the measurements obtained from the E series tests conducted at the German HDR facility deserve special attention. These long term tests simulated various severe accident conditions, including external spraying of the hemispherical steel shell. This investigation focuses upon the integral response of the HDR containment atmosphere during spray periods and upon methods by which lumped parameter system codes, like CONTAIN, model the underlying condensation phenomena. Increases in spray water flowrates above a minimum value were ineffective at improving containment pressure reduction since the limiting resistance for energy transfer lies in the noncondensable-vapor boundary layer at the inner condensing surface. The spray created an unstable condition by cooling the upper layers of a heated atmosphere and thus inducing global natural circulation flows in the facility and subsequently, abrupt changes in lighter-than-air noncondensable (J{sub 2}/He) concentrations. Modeling results using the CONTAIN code are outlined and code limitations are delineated.

  4. Severe Accident Test Station Activity Report

    SciTech Connect

    Pint, Bruce A.; Terrani, Kurt A.

    2015-06-01

    Enhancing safety margins in light water reactor (LWR) severe accidents is currently the focus of a number of international R&D programs. The current UO2/Zr-based alloy fuel system is particularly susceptible since the Zr-based cladding experiences rapid oxidation kinetics in steam at elevated temperatures. Therefore, alternative cladding materials that offer slower oxidation kinetics and a smaller enthalpy of oxidation can significantly reduce the rate of heat and hydrogen generation in the core during a coolant-limited severe accident. In the U.S. program, the high temperature steam oxidation performance of accident tolerant fuel (ATF) cladding solutions has been evaluated in the Severe Accident Test Station (SATS) at Oak Ridge National Laboratory (ORNL) since 2012. This report summarizes the capabilities of the SATS and provides an overview of the oxidation kinetics of several candidate cladding materials. A suggested baseline for evaluating ATF candidates is a two order of magnitude reduction in the steam oxidation resistance above 1000ºC compared to Zr-based alloys. The ATF candidates are categorized based on the protective external oxide or scale that forms during exposure to steam at high temperature: chromia, alumina, and silica. Comparisons are made to literature and SATS data for Zr-based alloys and other less-protective materials.

  5. Immediate medical consequences of nuclear accidents: lessons from Chernobyl

    SciTech Connect

    Gale, R.P.

    1987-08-07

    The immediate medical response to the nuclear accident at the Chernobyl nuclear power station involved containment of the radioactivity and evacuation of the nearby population. The next step consisted of assessment of the radiation dose received by individuals, based on biological dosimetry, and treatment of those exposed. Medical care involved treatment of skin burns; measures to support bone marrow failure, gastrointestinal tract injury, and other organ damage (i.e., infection prophylaxis and transfusions) for those with lower radiation dose exposure; and bone marrow transplantation for those exposed to a high dose of radiation. At Chernobyl, two victims died immediately and 29 died of radiation or thermal injuries in the next three months. The remaining victims of the accident are currently well. A nuclear accident anywhere is a nuclear accident everywhere. Prevention and cooperation in response to these accidents are essential goals.

  6. Physics in Accident Investigations.

    ERIC Educational Resources Information Center

    Brake, Mary L.

    1981-01-01

    Describes physics formulas which can be used by law enforcement officials to determine the possible velocity of vehicles involved in traffic accidents. These include, among others, the slide to stop-level road, slide to stop-sloping roadway, and slide to stop-two different surfaces formulas. (JN)

  7. Antimicrobial Peptide P60.4Ac-Containing Creams and Gel for Eradication of Methicillin-Resistant Staphylococcus aureus from Cultured Skin and Airway Epithelial Surfaces.

    PubMed

    Haisma, Elisabeth M; Göblyös, Anikó; Ravensbergen, Bep; Adriaans, Alwin E; Cordfunke, Robert A; Schrumpf, Jasmijn; Limpens, Ronald W A L; Schimmel, Kirsten J M; den Hartigh, Jan; Hiemstra, Pieter S; Drijfhout, Jan Wouter; El Ghalbzouri, Abdoelwaheb; Nibbering, Peter H

    2016-07-01

    We previously found the LL-37-derived peptide P60.4Ac to be effective against methicillin-resistant Staphylococcus aureus (MRSA) on human epidermal models (EMs). The goal of this study was to identify the preferred carrier for this peptide for topical application on skin and mucosal surfaces. We prepared P60.4Ac in three formulations, i.e., a water-in-oil cream with lanolin (Softisan 649), an oil-in-water cream with polyethylene glycol hexadecyl ether (Cetomacrogol), and a hydroxypropyl methylcellulose (hypromellose) 4000 gel. We tested the antimicrobial efficacy of the peptide in these formulations against mupirocin-resistant and -sensitive MRSA strains on EMs and bronchial epithelial models (BEMs). The cytotoxic effects of formulated P60.4Ac on these models were determined using histology and WST-1 and lactate dehydrogenase assays. Moreover, we assessed the stability of the peptide in these formulations with storage for up to 3 months. Killing of MRSA by P60.4Ac in the two creams was less effective than that by P60.4Ac in the hypromellose gel. In agreement with those findings, P60.4Ac in the hypromellose gel was highly effective in eradicating the two MRSA strains from EMs. We found that even 0.1% (wt/wt) P60.4Ac in the hypromellose gel killed >99% of the viable planktonic bacteria and >85% of the biofilm-associated bacteria on EMs. Hypromellose gels containing 0.1% and 0.5% (wt/wt) P60.4Ac effectively reduced the numbers of viable MRSA cells from BEMs by >90%. No cytotoxic effects of P60.4Ac in the hypromellose gel with up to 2% (wt/wt) P60.4Ac on keratinocytes in EMs and in the hypromellose gel with up to 0.5% (wt/wt) P60.4Ac on epithelial cells in BEMs were observed. High-performance liquid chromatography analysis showed that P60.4Ac was stable in the Softisan cream and the hypromellose gel but not in the Cetomacrogol cream. We conclude that P60.4Ac formulated in hypromellose gel is both stable and highly effective in eradicating MRSA from colonized EMs and

  8. Commercial SNF Accident Release Fractions

    SciTech Connect

    J. Schulz

    2004-11-05

    The purpose of this analysis is to specify and document the total and respirable fractions for radioactive materials that could be potentially released from an accident at the repository involving commercial spent nuclear fuel (SNF) in a dry environment. The total and respirable release fractions are used to support the preclosure licensing basis for the repository. The total release fraction is defined as the fraction of total commercial SNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. Radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses; this subset of the total release fraction is referred to as the respirable release fraction. Accidents may involve waste forms characterized as: (1) bare unconfined intact fuel assemblies, (2) confined intact fuel assemblies, or (3) canistered failed commercial SNF. Confined intact commercial SNF assemblies at the repository are contained in shipping casks, canisters, or waste packages. Four categories of failed commercial SNF are identified: (1) mechanically and cladding-penetration damaged commercial SNF, (2) consolidated/reconstituted assemblies, (3) fuel rods, pieces, and debris, and (4) nonfuel components. It is assumed that failed commercial SNF is placed into waste packages with a mesh screen at each end (CRWMS M&O 1999). In contrast to bare unconfined fuel assemblies, the

  9. An approach to accidents modeling based on compounds road environments.

    PubMed

    Fernandes, Ana; Neves, Jose

    2013-04-01

    The most common approach to study the influence of certain road features on accidents has been the consideration of uniform road segments characterized by a unique feature. However, when an accident is related to the road infrastructure, its cause is usually not a single characteristic but rather a complex combination of several characteristics. The main objective of this paper is to describe a methodology developed in order to consider the road as a complete environment by using compound road environments, overcoming the limitations inherented in considering only uniform road segments. The methodology consists of: dividing a sample of roads into segments; grouping them into quite homogeneous road environments using cluster analysis; and identifying the influence of skid resistance and texture depth on road accidents in each environment by using generalized linear models. The application of this methodology is demonstrated for eight roads. Based on real data from accidents and road characteristics, three compound road environments were established where the pavement surface properties significantly influence the occurrence of accidents. Results have showed clearly that road environments where braking maneuvers are more common or those with small radii of curvature and high speeds require higher skid resistance and texture depth as an important contribution to the accident prevention. PMID:23376544

  10. Applying STAMP in Accident Analysis

    NASA Technical Reports Server (NTRS)

    Leveson, Nancy; Daouk, Mirna; Dulac, Nicolas; Marais, Karen

    2003-01-01

    Accident models play a critical role in accident investigation and analysis. Most traditional models are based on an underlying chain of events. These models, however, have serious limitations when used for complex, socio-technical systems. Previously, Leveson proposed a new accident model (STAMP) based on system theory. In STAMP, the basic concept is not an event but a constraint. This paper shows how STAMP can be applied to accident analysis using three different views or models of the accident process and proposes a notation for describing this process.

  11. [Equestrian accidents in children].

    PubMed

    Giebel, G; Braun, K; Mittelmeier, W

    1993-11-01

    In a retrospective study we reviewed 262 horse riding related injuries in children younger than 16 which were treated between 1975 and 1989 at the Section of Traumatology in the Department of Surgery, University Hospital Homburg/Saar. In 155 of these accidents, detailed information was gained via a questionnaire. The typical patient profile was that of young female equestrians with little experience and little weekly riding practice, without practicing falling-exercises and warming up often using different horses. At the time of the accident only 59% were wearing a head protection. Most accidents happened in the summer months in the afternoon during leisure riding on a large familiar horse in the riding hall. Apart from the typical accidents like falling of the horse (64.9%) and falling with the horse (5.7%) accidents in handling the horse were of special significance: Kick by horse's hoof (11.8%), being stepped by horse (3.8%), horsebite (7.3%) and injuries of horse's bridle had their own pattern of injuries. Injuries of the distal parts of the upper extremity are preeminent in falling of the horse, whilst in falling with the horse head injuries and shoulder injuries are preeminent. Remarkably often injuries of kick by horse's hoof were causing sometimes even dangerous head injuries (41.6%). Overall in horse riding related injuries in childhood superficial soft tissue injuries (48.6%) and fractures (30.6%) were predominant. Fractures of the clavicle which are well known as a riding injury proved to be typical for a fall with the horse, whilst a fractured vertebra was only seen once amongst the 262 children treated. The severity of the injuries was lower than expected: In 85.1% of all the injuries only one body region was injured, 90.1% could be assigned to an injury severity score (ISS) of 1-3. Ponyriders had less severe injuries than riders of large horses. One fatal accident happened in handling a horse, in these situations preventive measures are often

  12. Identification of Immunogenic Cytotoxic T Lymphocyte Epitopes Containing Drug Resistance Mutations in Antiretroviral Treatment-Naïve HIV-Infected Individuals

    PubMed Central

    Blanco-Heredia, Juan; Lecanda, Aarón; Valenzuela-Ponce, Humberto; Brander, Christian; Ávila-Ríos, Santiago; Reyes-Terán, Gustavo

    2016-01-01

    Background Therapeutic HIV vaccines may prove helpful to intensify antiretroviral treatment (ART) efficacy and may be an integral part of future cure strategies. Methods We examined IFN-gamma ELISpot responses to a panel of 218 HIV clade B consensus-based HIV protease-reverse transcriptase peptides, designed to mimic previously described and predicted cytotoxic T lymphocyte epitopes overlapping drug resistance (DR) positions, that either included the consensus sequence or the DR variant sequence, in 49 ART-naïve HIV-infected individuals. Next generation sequencing was used to assess the presence of minority DR variants in circulating viral populations. Results Although a wide spectrum of differential magnitudes of response to DR vs. WT peptide pairs was observed, responses to DR peptides were frequent and strong in the study cohort. No difference between the median magnitudes of response to DR vs. WT peptides was observed. Interestingly, of the 22 peptides that were recognized by >15% of the participants, two-thirds (64%) corresponded to DR peptides. When analysing responses per peptide pair per individual, responses to only WT (median 4 pairs/individual) or DR (median 6 pairs/individual) were more common than responses to both WT and DR (median 2 pairs/individual; p<0.001). While the presence of ELISpot responses to WT peptides was frequently associated with the presence of the corresponding peptide sequence in the patient’s virus (mean 68% of cases), responses to DR peptides were generally not associated with the presence of DR mutations in the viral population, even at low frequencies (mean 1.4% of cases; p = 0.0002). Conclusions Our data suggests that DR peptides are frequently immunogenic and raises the potential benefit of broadening the antigens included in a therapeutic vaccine approach to immunogenic epitopes containing common DR sequences. Further studies are needed to assess the quality of responses elicited by DR peptides. PMID:26808823

  13. Real-time visualization of pH-responsive PLGA hollow particles containing a gas-generating agent targeted for acidic organelles for overcoming multi-drug resistance.

    PubMed

    Ke, Cherng-Jyh; Chiang, Wei-Lun; Liao, Zi-Xian; Chen, Hsin-Lung; Lai, Ping-Shan; Sun, Jui-Sheng; Sung, Hsing-Wen

    2013-01-01

    Chemotherapy research highly prioritizes overcoming the multi-drug resistance (MDR) effect in cancer cells. To overcome the drug efflux mediated by P-glycoprotein (P-gp) transporters, we developed pH-responsive poly(D,L-lactic-co-glycolic acid) hollow particles (PLGA HPs), capable of delivering doxorubicin (DOX) into MDR cells (MCF-7/ADR). The shell wall of PLGA HPs contained DiO (a hydrophobic dye), and their aqueous core carried DOX hydrochloride salt and sodium bicarbonate, a gas-generating agent when present in acidic environments. Both DiO and DOX could serve as fluorescence probes to localize HPs and visualize their intracellular drug release in real-time. Real-time confocal images provided visible evidences of the acid-responsive intracellular release of DOX from PLGA HPs in MDR cells. Via the macropinocytosis pathway, PLGA HPs taken up by cells experienced an increasingly acidic environment as they trafficked through the early endosomes and then matured into more acidic late endosomes/lysosomes. The progressive acidification of the internalized particles in the late endosomes/lysosomes generated CO(2) bubbles, leading to the disruption of HPs, prompt release of DOX, its accumulation in the nuclei, and finally the death of MDR cells. Conversely, taken up via a passive diffusion mechanism, free DOX was found mainly at the perimembrane region and barely reached the cell nuclei; therefore, no apparent cytotoxicity was observed. These results suggest that the developed PLGA HPs were less susceptible to the P-gp-mediated drug efflux in MDR cells and is a highly promising approach in chemotherapy. PMID:23044041

  14. BWR steel containment corrosion

    SciTech Connect

    Tan, C.P.; Bagchi, G.

    1996-04-01

    The report describes regulatory actions taken after corrosion was discovered in the drywell at the Oyster Creek Plant and in the torus at the Nine Mile Point 1 Plant. The report describes the causes of corrosion, requirements for monitoring corrosion, and measures to mitigate the corrosive environment for the two plants. The report describes the issuances of generic letters and information notices either to collect information to determine whether the problem is generic or to alert the licensees of similar plants about the existence of such a problem. Implementation of measures to enhance the containment performance under severe accident conditions is discussed. A study by Brookhaven National Laboratory (BNL) of the performance of a degraded containment under severe accident conditions is summarized. The details of the BNL study are in the appendix to the report.

  15. Radionuclide Behavior in Containments.

    2000-02-14

    MATADOR analyzes the transport and deposition of radionuclides as vapor or aerosol through Light Water Reactor (LWR) containments during severe accidents and calculates environmental release fractions of radionuclides as a function of time. It is intended for use in system risk studies. The principal output is information on the timing and magnitude of radionuclide releases to the environment as a result of severely degraded core accidents. MATADOR considers the transport of radionuclides through the containmentmore » and their removal by natural deposition and the operation of engineered safety systems such as sprays. Input data on the source term from the primary system, the containment geometry, and thermal-hydraulic conditions are required.« less

  16. 49 CFR 835.11 - Obtaining Board accident reports, factual accident reports, and supporting information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Obtaining Board accident reports, factual accident... Board accident reports, factual accident reports, and supporting information. It is the responsibility... obtain Board accident reports, factual accident reports, and accompanying accident docket files....

  17. 49 CFR 835.11 - Obtaining Board accident reports, factual accident reports, and supporting information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Obtaining Board accident reports, factual accident... Board accident reports, factual accident reports, and supporting information. It is the responsibility... obtain Board accident reports, factual accident reports, and accompanying accident docket files....

  18. Accident Flying Squad

    PubMed Central

    Snook, Roger

    1972-01-01

    This paper describes the organization, evaluation, and costing of an independently financed and operated accident flying squad. 132 accidents involving 302 casualties were attended, six deaths were prevented, medical treatment contributed to the survival of a further four, and the condition or comfort of many other casualties was improved. The calls in which survival was influenced were evenly distributed throughout the three-and-a-half-year survey and seven of the 10 so aided were over 16 and under 30 years of age, all 10 being in the working age group. The time taken to provide the service was not excessive and the expense when compared with the overall saving was very small. The scheme was seen to be equally suitable for basing on hospital or general practice or both, and working as an integrated team with the ambulance service. The use of specialized transport was found to be unnecessary. Other benefits of the scheme included use of the experience of attending accidents to ensure relevant and realistic training for emergency service personnel, and an appreciation of the effect of ambulance design on the patient. ImagesFIG. 1FIG. 4 PMID:5069642

  19. Passive containment cooling system

    DOEpatents

    Billig, P.F.; Cooke, F.E.; Fitch, J.R.

    1994-01-25

    A passive containment cooling system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel and is vented to the drywell. An isolation pool is disposed above the GDCS pool and includes an isolation condenser therein. The condenser has an inlet line disposed in flow communication with the drywell for receiving the non-condensable gas along with any steam released therein following a loss-of-coolant accident (LOCA). The condenser also has an outlet line disposed in flow communication with the drywell for returning to the drywell both liquid condensate produced upon cooling of the steam and the non-condensable gas for reducing pressure within the containment vessel following the LOCA. 1 figure.

  20. Pressure suppression containment system

    DOEpatents

    Gluntz, Douglas M.; Townsend, Harold E.

    1994-03-15

    A pressure suppression containment system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel. The wetwell pool includes a plenum for receiving the non-condensable gas carried with steam from the drywell following a loss-of coolant-accident (LOCA). The wetwell plenum is vented to a plenum above the GDCS pool following the LOCA for suppressing pressure rise within the containment vessel. A method of operation includes channeling steam released into the drywell following the LOCA into the wetwell pool for cooling along with the non-condensable gas carried therewith. The GDCS pool is then drained by gravity, and the wetwell plenum is vented into the GDCS plenum for channeling the non-condensable gas thereto.

  1. Pressure suppression containment system

    DOEpatents

    Gluntz, D.M.; Townsend, H.E.

    1994-03-15

    A pressure suppression containment system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel. The wetwell pool includes a plenum for receiving the non-condensable gas carried with steam from the drywell following a loss-of-coolant-accident (LOCA). The wetwell plenum is vented to a plenum above the GDCS pool following the LOCA for suppressing pressure rise within the containment vessel. A method of operation includes channeling steam released into the drywell following the LOCA into the wetwell pool for cooling along with the non-condensable gas carried therewith. The GDCS pool is then drained by gravity, and the wetwell plenum is vented into the GDCS plenum for channeling the non-condensable gas thereto. 6 figures.

  2. Passive containment cooling system

    DOEpatents

    Billig, Paul F.; Cooke, Franklin E.; Fitch, James R.

    1994-01-01

    A passive containment cooling system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel and is vented to the drywell. An isolation pool is disposed above the GDCS pool and includes an isolation condenser therein. The condenser has an inlet line disposed in flow communication with the drywell for receiving the non-condensable gas along with any steam released therein following a loss-of-coolant accident (LOCA). The condenser also has an outlet line disposed in flow communication with the drywell for returning to the drywell both liquid condensate produced upon cooling of the steam and the non-condensable gas for reducing pressure within the containment vessel following the LOCA.

  3. The effects of aircraft certification rules on general aviation accidents

    NASA Astrophysics Data System (ADS)

    Anderson, Carolina Lenz

    The purpose of this study was to analyze the frequency of general aviation airplane accidents and accident rates on the basis of aircraft certification to determine whether or not differences in aircraft certification rules had an influence on accidents. In addition, the narrative cause descriptions contained within the accident reports were analyzed to determine whether there were differences in the qualitative data for the different certification categories. The certification categories examined were: Federal Aviation Regulations Part 23, Civil Air Regulations 3, Light Sport Aircraft, and Experimental-Amateur Built. The accident causes examined were those classified as: Loss of Control, Controlled Flight into Terrain, Engine Failure, and Structural Failure. Airworthiness certification categories represent a wide diversity of government oversight. Part 23 rules have evolved from the initial set of simpler design standards and have progressed into a comprehensive and strict set of rules to address the safety issues of the more complex airplanes within the category. Experimental-Amateur Built airplanes have the least amount of government oversight and are the fastest growing segment. The Light Sport Aircraft category is a more recent certification category that utilizes consensus standards in the approval process. Civil Air Regulations 3 airplanes were designed and manufactured under simpler rules but modifying these airplanes has become lengthy and expensive. The study was conducted using a mixed methods methodology which involves both quantitative and qualitative elements. A Chi-Square test was used for a quantitative analysis of the accident frequency among aircraft certification categories. Accident rate analysis of the accidents among aircraft certification categories involved an ANCOVA test. The qualitative component involved the use of text mining techniques for the analysis of the narrative cause descriptions contained within the accident reports. The Chi

  4. Complex integrons containing qnrB4-ampC (bla(DHA-1)) in plasmids of multidrug-resistant Citrobacter freundii from wastewater.

    PubMed

    Yim, Grace; Kwong, Waldan; Davies, Julian; Miao, Vivian

    2013-02-01

    Microbial populations in wastewater treatment plants (WWTPs) are increasingly being recognized as environmental reservoirs of antibiotic resistance genes. PCR amplicons for plasmid-mediated quinolone resistance determinants qnrA, qnrB, and qnrS were recorded in samples from a WWTP in Vancouver, British Columbia. Six strains of ciprofloxacin-resistant Citrobacter freundii were isolated and found to carry mutations in gyrA and parC, as well as multiple plasmid-borne resistance genes, collectively including qnrB; aac(6')-Ib-cr; β-lactamase-encoding genes from molecular classes A (blaTEM-1), C (ampC), D (blaOXA-1, blaOXA-10); and genes for resistance to 5 other types of antibiotics. In 3 strains, large (>60 kb) plasmids carried qnrB4 and ampC as part of a complex integron in a 14 kb arrangement that has been reported worldwide but, until recently, only among pathogenic strains of Klebsiella. Analysis of single-nucleotide polymorphisms in the qnrB4-ampC regions infers 2 introductions into the WWTP environment. These results suggest recent passage of plasmid-borne fluoroquinolone and β-lactam resistance genes from pathogens to bacteria that may be indigenous inhabitants of WWTPs, thus contributing to an environmental pool of antibiotic resistance. PMID:23461518

  5. [Chernobyl nuclear power plant accident and Tokaimura criticality accident].

    PubMed

    Takada, Jun

    2012-03-01

    It is clear from inspection of historical incidents that the scale of disasters in a nuclear power plant accident is quite low level overwhelmingly compared with a nuclear explosion in nuclear war. Two cities of Hiroshima and Nagasaki were destroyed by nuclear blast with about 20 kt TNT equivalent and then approximately 100,000 people have died respectively. On the other hand, the number of acute death is 30 in the Chernobyl nuclear reactor accident. In this chapter, we review health hazards and doses in two historical nuclear incidents of Chernobyl and Tokaimura criticality accident and then understand the feature of the radiation accident in peaceful utilization of nuclear power. PMID:22514916

  6. Severe Accident Test Station Design Document

    SciTech Connect

    Snead, Mary A.; Yan, Yong; Howell, Michael; Keiser, James R.; Terrani, Kurt A.

    2015-09-01

    The purpose of the ORNL severe accident test station (SATS) is to provide a platform for evaluation of advanced fuels under projected beyond design basis accident (BDBA) conditions. The SATS delivers the capability to map the behavior of advanced fuels concepts under accident scenarios across various temperature and pressure profiles, steam and steam-hydrogen gas mixtures, and thermal shock. The overall facility will include parallel capabilities for examination of fuels and irradiated materials (in-cell) and non-irradiated materials (out-of-cell) at BDBA conditions as well as design basis accident (DBA) or loss of coolant accident (LOCA) conditions. Also, a supporting analytical infrastructure to provide the data-needs for the fuel-modeling components of the Fuel Cycle Research and Development (FCRD) program will be put in place in a parallel manner. This design report contains the information for the first, second and third phases of design and construction of the SATS. The first phase consisted of the design and construction of an out-of-cell BDBA module intended for examination of non-irradiated materials. The second phase of this work was to construct the BDBA in-cell module to test irradiated fuels and materials as well as the module for DBA (i.e. LOCA) testing out-of-cell, The third phase was to build the in-cell DBA module. The details of the design constraints and requirements for the in-cell facility have been closely captured during the deployment of the out-of-cell SATS modules to ensure effective future implementation of the in-cell modules.

  7. Skid Resistance Research

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Skidding causes many traffic accidents. Streets and highways with skid-resisting surfaces reduce the incidence of such accidents. In fact, resurfacing roads to improve skid resistance is now required by federal law. Skid resistance is measured by road testing with specially equipped skid trailers. A project underway at NASA-Langley may considerably reduce the cost of skid trailers, thus making them more widely available to highway departments. For testing the skid resistance of aircraft runways, Langley engineers developed a relatively inexpensive test vehicle and a "pulsed braking" technique that is now being applied experimentally to road testing. The vehicle is a standard automobile modified to incorporate instrumentation, special test tires and valves, and a trailing fifth wheel for monitoring distance and velocity. The instrumentation includes a low-cost meter, a set of accelerometers that sense motion changes, and a chart recorder.

  8. Nucleoside Reverse Transcriptase Inhibitor Resistance Mutations Associated with First-Line Stavudine-Containing Antiretroviral Therapy: Programmatic Implications for Countries Phasing Out Stavudine

    PubMed Central

    Tang, Michele W.; Rhee, Soo-Yon; Bertagnolio, Silvia; Ford, Nathan; Holmes, Susan; Sigaloff, Kim C.; Hamers, Raph L.; de Wit, Tobias F. Rinke; Fleury, Herve J.; Kanki, Phyllis J.; Ruxrungtham, Kiat; Hawkins, Claudia A.; Wallis, Carole L.; Stevens, Wendy; van Zyl, Gert U.; Manosuthi, Weerawat; Hosseinipour, Mina C.; Ngo-Giang-Huong, Nicole; Belec, Laurent; Peeters, Martine; Aghokeng, Avelin; Bunupuradah, Torsak; Burda, Sherri; Cane, Patricia; Cappelli, Giulia; Charpentier, Charlotte; Dagnra, Anoumou Y.; Deshpande, Alaka K.; El-Katib, Ziad; Eshleman, Susan H.; Fokam, Joseph; Gody, Jean-Chrysostome; Katzenstein, David; Koyalta, Donato D.; Kumwenda, Johnstone J.; Lallemant, Marc; Lynen, Lutgarde; Marconi, Vincent C.; Margot, Nicolas A.; Moussa, Sandrine; Ndung'u, Thumbi; Nyambi, Phillipe N.; Orrell, Catherine; Schapiro, Jonathan M.; Schuurman, Rob; Sirivichayakul, Sunee; Smith, Davey; Zolfo, Maria; Jordan, Michael R.; Shafer, Robert W.

    2013-01-01

    Background The World Health Organization Antiretroviral Treatment Guidelines recommend phasing-out stavudine because of its risk of long-term toxicity. There are two mutational pathways of stavudine resistance with different implications for zidovudine and tenofovir cross-resistance, the primary candidates for replacing stavudine. However, because resistance testing is rarely available in resource-limited settings, it is critical to identify the cross-resistance patterns associated with first-line stavudine failure. Methods We analyzed HIV-1 resistance mutations following first-line stavudine failure from 35 publications comprising 1,825 individuals. We also assessed the influence of concomitant nevirapine vs. efavirenz, therapy duration, and HIV-1 subtype on the proportions of mutations associated with zidovudine vs. tenofovir cross-resistance. Results Mutations with preferential zidovudine activity, K65R or K70E, occurred in 5.3% of individuals. Mutations with preferential tenofovir activity, ≥two thymidine analog mutations (TAMs) or Q151M, occurred in 22% of individuals. Nevirapine increased the risk of TAMs, K65R, and Q151M. Longer therapy increased the risk of TAMs and Q151M but not K65R. Subtype C and CRF01_AE increased the risk of K65R, but only CRF01_AE increased the risk of K65R without Q151M. Conclusions Regardless of concomitant nevirapine vs. efavirenz, therapy duration, or subtype, tenofovir was more likely than zidovudine to retain antiviral activity following first-line d4T therapy. PMID:23687292

  9. Membrane vesicles from multidrug-resistant human carcinoma cells contain a specific 150,000-170,000 dalton protein detected by photoaffinity labeling

    SciTech Connect

    Cornwell, M.M.; Safa, A.R.; Felsted, R.L.; Gottesman, M.M.; Pastan, I.

    1986-05-01

    The authors have selected multidrug-resistant human KB carcinoma cells in high levels of colchicine (KB-C4) or vinblastine (KB-V1) which are cross-resistant to many other structurally unrelated chemotheraputic agents. To determine the mechanism of reduced drug accumulation, they measured /sup 3/H-vinblastine (/sup 3/H-VBL) association with membrane vesicles made from parental drug sensitive, drug-resistant and revertant cells. Membrane vesicles from highly multidrug resistant cells exhibited increased specific and saturable binding of vinblastine, (Kd = 1 ..mu..M) that was temperature dependent and trypsin sensitive. To identify the molecules which bind vinblastine, membrane vesicles were exposed to two photo-activatable analogs of vinblastine, (N-P-(azido-3,5,-(/sup 3/H)-benzoyl)-N'-..beta..-aminoethylvindisine (/sup 3/H-NAB) and N-P-(azido-3-(/sup 125/I)-solicyl)-N'-..beta..-aminoethylvindesine (/sup 125/I-NASV). The specific labeling of a 150,000-170,000 dalton protein in membrane vesicles from multidrug-resistant KB-C4 and KB-V1 cells was found. /sup 125/I-NASV labeling was inhibited by vinblastine, vincrinstine and verapamil but not by colchicine or dexamethasone. The 150,000-170,000 dalton protein may have an important role in the multidrug resistance phenotype.

  10. MRJP1-containing glycoproteins isolated from honey, a novel antibacterial drug candidate with broad spectrum activity against multi-drug resistant clinical isolates

    PubMed Central

    Brudzynski, Katrina; Sjaarda, Calvin; Lannigan, Robert

    2015-01-01

    The emergence of extended- spectrum β-lactamase (ESBL) is the underlying cause of growing antibiotic resistance among Gram-negative bacteria to β-lactam antibiotics. We recently reported the discovery of honey glycoproteins (glps) that exhibited a rapid, concentration-dependent antibacterial activity against both Gram-positive Bacillus subtilis and Gram-negative Escherichia coli that resembled action of cell wall-active β-lactam drugs. Glps showed sequence identity with the Major Royal Jelly Protein 1 (MRJP1) precursor that harbors three antimicrobial peptides: Jelleins 1, 2, and 4. Here, we used semi-quantitative radial diffusion assay and broth microdilution assay to evaluate susceptibility of a number of multi-drug resistant (MDR) clinical isolates to the MRJP1-contaning honey glycoproteins. The MDR bacterial strains comprised three methicillin-resistant Staphylococcus aureus (MRSA), four Pseudomonas aeruginosa, two Klebsiella pneumoniae, two vancomycin-resistant Enterococci (VRE), and five ESBL identified as one Proteus mirabilis, three E. coli, and one E. coli NDM. Their resistance to different classes of antibiotics was confirmed using automated system Vitek 2. MDR isolates differed in their susceptibility to glps with MIC90 values ranging from 4.8 μg/ml against B. subtilis to 14.4 μg/ml against ESBL K. pneumoniae, Klebsiella spp. ESBL and E. coli and up to 33 μg/ml against highly resistant strains of P. aeruginosa. Glps isolated from different honeys showed a similar ability to overcome bacterial resistance to β-lactams suggesting that (a) their mode of action is distinct from other classes of β-lactams and that (b) the common glps structure was the lead structure responsible for the activity. The results of the current study together with our previous evidence of a rapid bactericidal activity of glps demonstrate that glps possess suitable characteristics to be considered a novel antibacterial drug candidate. PMID:26217333

  11. Limited Fitness Advantages of Crop-Weed Hybrid Progeny Containing Insect-Resistant Transgenes (Bt/CpTI) in Transgenic Rice Field

    PubMed Central

    Yang, Xiao; Wang, Feng; Su, Jun; Lu, Bao-Rong

    2012-01-01

    Background The spread of insect-resistance transgenes from genetically engineered (GE) rice to its coexisting weedy rice (O. sativa f. spontanea) populations via gene flow creates a major concern for commercial GE rice cultivation. Transgene flow to weedy rice seems unavoidable. Therefore, characterization of potential fitness effect brought by the transgenes is essential to assess environmental consequences caused by crop-weed transgene flow. Methodology/Principal Findings Field performance of fitness-related traits was assessed in advanced hybrid progeny of F4 generation derived from a cross between an insect-resistant transgenic (Bt/CpTI) rice line and a weedy strain. The performance of transgene-positive hybrid progeny was compared with the transgene-negative progeny and weedy parent in pure and mixed planting of transgenic and nontransgenic plants under environmental conditions with natural vs. low insect pressure. Results showed that under natural insect pressure the insect-resistant transgenes could effectively suppress target insects and bring significantly increased fitness to transgenic plants in pure planting, compared with nontransgenic plants (including weedy parent). In contrast, no significant differences in fitness were detected under low insect pressure. However, such increase in fitness was not detected in the mixed planting of transgenic and nontransgenic plants due to significantly reduced insect pressure. Conclusions/Significance Insect-resistance transgenes may have limited fitness advantages to hybrid progeny resulted from crop-weed transgene flow owning to the significantly reduced ambient target insect pressure when an insect-resistant GE crop is grown. Given that the extensive cultivation of an insect-resistant GE crop will ultimately reduce the target insect pressure, the rapid spread of insect-resistance transgenes in weedy populations in commercial GE crop fields may be not likely to happen. PMID:22815975

  12. MRJP1-containing glycoproteins isolated from honey, a novel antibacterial drug candidate with broad spectrum activity against multi-drug resistant clinical isolates.

    PubMed

    Brudzynski, Katrina; Sjaarda, Calvin; Lannigan, Robert

    2015-01-01

    The emergence of extended- spectrum β-lactamase (ESBL) is the underlying cause of growing antibiotic resistance among Gram-negative bacteria to β-lactam antibiotics. We recently reported the discovery of honey glycoproteins (glps) that exhibited a rapid, concentration-dependent antibacterial activity against both Gram-positive Bacillus subtilis and Gram-negative Escherichia coli that resembled action of cell wall-active β-lactam drugs. Glps showed sequence identity with the Major Royal Jelly Protein 1 (MRJP1) precursor that harbors three antimicrobial peptides: Jelleins 1, 2, and 4. Here, we used semi-quantitative radial diffusion assay and broth microdilution assay to evaluate susceptibility of a number of multi-drug resistant (MDR) clinical isolates to the MRJP1-contaning honey glycoproteins. The MDR bacterial strains comprised three methicillin-resistant Staphylococcus aureus (MRSA), four Pseudomonas aeruginosa, two Klebsiella pneumoniae, two vancomycin-resistant Enterococci (VRE), and five ESBL identified as one Proteus mirabilis, three E. coli, and one E. coli NDM. Their resistance to different classes of antibiotics was confirmed using automated system Vitek 2. MDR isolates differed in their susceptibility to glps with MIC90 values ranging from 4.8 μg/ml against B. subtilis to 14.4 μg/ml against ESBL K. pneumoniae, Klebsiella spp. ESBL and E. coli and up to 33 μg/ml against highly resistant strains of P. aeruginosa. Glps isolated from different honeys showed a similar ability to overcome bacterial resistance to β-lactams suggesting that (a) their mode of action is distinct from other classes of β-lactams and that (b) the common glps structure was the lead structure responsible for the activity. The results of the current study together with our previous evidence of a rapid bactericidal activity of glps demonstrate that glps possess suitable characteristics to be considered a novel antibacterial drug candidate. PMID:26217333

  13. Rear-end accident victims. Importance of understanding the accident.

    PubMed Central

    Sehmer, J. M.

    1993-01-01

    Family physicians regularly treat victims of rear-end vehicle accidents. This article describes how taking a detailed history of the accident and understanding the significance of the physical events is helpful in understanding and anticipating patients' morbidity and clinical course. Eight questions to ask patients are suggested to help physicians understand the severity of injury. PMID:8495140

  14. Reactor Accident Consequence Code

    SciTech Connect

    2015-11-02

    MACCS1.5 performs probabilistic calculations of potential off site consequences of the atmospheric releases of radioactive material in reactor accidents. The principal phenomena considered in MACCS are atmospheric transport, environmental contamination, emergency response, long term mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. MACCS can be used for a variety of applications including probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, sensitivity studies to gain a better understanding of the parameters important to PRA, and cost benefit analysis. The time scale after the accident is divided into three phases: emergency, intermediate, and long term. The region surrounding the reactor is divided into a polar-coordinate grid, with the reactor located at the center, for the calculations. Two preprocessors, MAXGC and DOSFAC, are included. MAXGC generates the maximum allowable ground concentrations based on protective action guide (PAG) dose levels. DOSFAC generates the dose conversion data used by MACCS.

  15. Reactor Accident Consequence Code

    2015-11-02

    MACCS1.5 performs probabilistic calculations of potential off site consequences of the atmospheric releases of radioactive material in reactor accidents. The principal phenomena considered in MACCS are atmospheric transport, environmental contamination, emergency response, long term mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. MACCS can be used for a variety of applications including probabilistic risk assessment (PRA) ofmore » nuclear power plants and other nuclear facilities, sensitivity studies to gain a better understanding of the parameters important to PRA, and cost benefit analysis. The time scale after the accident is divided into three phases: emergency, intermediate, and long term. The region surrounding the reactor is divided into a polar-coordinate grid, with the reactor located at the center, for the calculations. Two preprocessors, MAXGC and DOSFAC, are included. MAXGC generates the maximum allowable ground concentrations based on protective action guide (PAG) dose levels. DOSFAC generates the dose conversion data used by MACCS.« less

  16. Network-level accident-mapping: Distance based pattern matching using artificial neural network.

    PubMed

    Deka, Lipika; Quddus, Mohammed

    2014-04-01

    The objective of an accident-mapping algorithm is to snap traffic accidents onto the correct road segments. Assigning accidents onto the correct segments facilitate to robustly carry out some key analyses in accident research including the identification of accident hot-spots, network-level risk mapping and segment-level accident risk modelling. Existing risk mapping algorithms have some severe limitations: (i) they are not easily 'transferable' as the algorithms are specific to given accident datasets; (ii) they do not perform well in all road-network environments such as in areas of dense road network; and (iii) the methods used do not perform well in addressing inaccuracies inherent in and type of road environment. The purpose of this paper is to develop a new accident mapping algorithm based on the common variables observed in most accident databases (e.g. road name and type, direction of vehicle movement before the accident and recorded accident location). The challenges here are to: (i) develop a method that takes into account uncertainties inherent to the recorded traffic accident data and the underlying digital road network data, (ii) accurately determine the type and proportion of inaccuracies, and (iii) develop a robust algorithm that can be adapted for any accident set and road network of varying complexity. In order to overcome these challenges, a distance based pattern-matching approach is used to identify the correct road segment. This is based on vectors containing feature values that are common in the accident data and the network data. Since each feature does not contribute equally towards the identification of the correct road segments, an ANN approach using the single-layer perceptron is used to assist in "learning" the relative importance of each feature in the distance calculation and hence the correct link identification. The performance of the developed algorithm was evaluated based on a reference accident dataset from the UK confirming that

  17. IncM Plasmid R1215 Is the Source of Chromosomally Located Regions Containing Multiple Antibiotic Resistance Genes in the Globally Disseminated Acinetobacter baumannii GC1 and GC2 Clones

    PubMed Central

    Blackwell, Grace A.

    2016-01-01

    ABSTRACT Clear similarities between antibiotic resistance islands in the chromosomes of extensively antibiotic-resistant isolates from the two dominant, globally distributed Acinetobacter baumannii clones, GC1 and GC2, suggest a common origin. A close relative of the likely progenitor of both of these regions was found in R1215, a conjugative IncM plasmid from a Serratia marcescens strain isolated prior to 1980. The 37.8-kb resistance region in R1215 lies within the mucB gene and includes aacC1, aadA1, aphA1b, blaTEM, catA1, sul1, and tetA(A), genes that confer resistance to gentamicin, streptomycin and spectinomycin, kanamycin and neomycin, ampicillin, chloramphenicol, sulfamethoxazole, and tetracycline, respectively. The backbone of this region is derived from Tn1721 and is interrupted by a hybrid Tn2670 (Tn21)-Tn1696-type transposon, Tn6020, and an incomplete Tn1. After minor rearrangements, this R1215 resistance island can generate AbGRI2-0*, the predicted earliest form of the IS26-bounded AbGRI2-type resistance island of GC2 isolates, and to the multiple antibiotic resistance region (MARR) of AbaR0, the precursor of this region in AbaR-type resistance islands in the GC1 group. A 29.9-kb circle excised by IS26 has been inserted into the A. baumannii chromosome to generate AbGRI2-0*. To create the MARR of AbaR0, a different circular form, again generated by IS26 from an R1215 resistance region variant, has been opened at a different point by recombination with a copy of the sul1 gene already present in the AbaR precursor. Recent IncM plasmids related to R1215 have a variant resistance island containing a blaSHV gene in the same location. IMPORTANCE Two lineages of extensively antibiotic-resistant A. baumannii currently plaguing modern medicine each acquired resistance to all of the original antibiotics (ampicillin, tetracycline, kanamycin, and sulfonamides) by the end of the 1970s and then became resistant to antibiotics from newer families after they were

  18. IncM Plasmid R1215 Is the Source of Chromosomally Located Regions Containing Multiple Antibiotic Resistance Genes in the Globally Disseminated Acinetobacter baumannii GC1 and GC2 Clones.

    PubMed

    Blackwell, Grace A; Hamidian, Mohammad; Hall, Ruth M

    2016-01-01

    Clear similarities between antibiotic resistance islands in the chromosomes of extensively antibiotic-resistant isolates from the two dominant, globally distributed Acinetobacter baumannii clones, GC1 and GC2, suggest a common origin. A close relative of the likely progenitor of both of these regions was found in R1215, a conjugative IncM plasmid from a Serratia marcescens strain isolated prior to 1980. The 37.8-kb resistance region in R1215 lies within the mucB gene and includes aacC1, aadA1, aphA1b, bla TEM, catA1, sul1, and tetA(A), genes that confer resistance to gentamicin, streptomycin and spectinomycin, kanamycin and neomycin, ampicillin, chloramphenicol, sulfamethoxazole, and tetracycline, respectively. The backbone of this region is derived from Tn1721 and is interrupted by a hybrid Tn2670 (Tn21)-Tn1696-type transposon, Tn6020, and an incomplete Tn1. After minor rearrangements, this R1215 resistance island can generate AbGRI2-0*, the predicted earliest form of the IS26-bounded AbGRI2-type resistance island of GC2 isolates, and to the multiple antibiotic resistance region (MARR) of AbaR0, the precursor of this region in AbaR-type resistance islands in the GC1 group. A 29.9-kb circle excised by IS26 has been inserted into the A. baumannii chromosome to generate AbGRI2-0*. To create the MARR of AbaR0, a different circular form, again generated by IS26 from an R1215 resistance region variant, has been opened at a different point by recombination with a copy of the sul1 gene already present in the AbaR precursor. Recent IncM plasmids related to R1215 have a variant resistance island containing a bla SHV gene in the same location. IMPORTANCE Two lineages of extensively antibiotic-resistant A. baumannii currently plaguing modern medicine each acquired resistance to all of the original antibiotics (ampicillin, tetracycline, kanamycin, and sulfonamides) by the end of the 1970s and then became resistant to antibiotics from newer families after they were introduced

  19. Revised accident source terms for light-water reactors

    SciTech Connect

    Soffer, L.

    1995-02-01

    This paper presents revised accident source terms for light-water reactors incorporating the severe accident research insights gained in this area over the last 15 years. Current LWR reactor accident source terms used for licensing date from 1962 and are contained in Regulatory Guides 1.3 and 1.4. These specify that 100% of the core inventory of noble gases and 25% of the iodine fission products are assumed to be instantaneously available for release from the containment. The chemical form of the iodine fission products is also assumed to be predominantly elemental iodine. These assumptions have strongly affected present nuclear air cleaning requirements by emphasizing rapid actuation of spray systems and filtration systems optimized to retain elemental iodine. A proposed revision of reactor accident source terms and some im implications for nuclear air cleaning requirements was presented at the 22nd DOE/NRC Nuclear Air Cleaning Conference. A draft report was issued by the NRC for comment in July 1992. Extensive comments were received, with the most significant comments involving (a) release fractions for both volatile and non-volatile species in the early in-vessel release phase, (b) gap release fractions of the noble gases, iodine and cesium, and (c) the timing and duration for the release phases. The final source term report is expected to be issued in late 1994. Although the revised source terms are intended primarily for future plants, current nuclear power plants may request use of revised accident source term insights as well in licensing. This paper emphasizes additional information obtained since the 22nd Conference, including studies on fission product removal mechanisms, results obtained from improved severe accident code calculations and resolution of major comments, and their impact upon the revised accident source terms. Revised accident source terms for both BWRS and PWRS are presented.

  20. Temperature of aircraft cargo flame exposure during accidents involving fuel spills

    SciTech Connect

    Mansfield, J.A.

    1993-01-01

    This report describes an evaluation of flame exposure temperatures of weapons contained in alert (parked) bombers due to accidents that involve aircraft fuel fires. The evaluation includes two types of accident, collisions into an alert aircraft by an aircraft that is on landing or take-off, and engine start accidents. Both the B-1B and B-52 alert aircraft are included in the evaluation.

  1. Improved resistance to wear and fatigue fracture in high pressure crystallized vitamin E-containing ultra-high molecular weight polyethylene

    PubMed Central

    Oral, Ebru; Beckos, Christine A. Godleski; Lozynsky, Andrew J.; Malhi, Arnaz S.; Muratoglu, Orhun K.

    2013-01-01

    Higher crystallinity and extended chain morphology are induced in ultra-high molecular weight polyethylene (UHMWPE) in the hexagonal phase at temperatures and pressures above the triple point, resulting in improved mechanical properties. In this study, we report the effects of the presence of a plasticizing agent, namely vitamin E (α-tocopherol), in UHMWPE during high pressure crystallization. We found that this new vitamin E-blended and high pressure crystallized UHMWPE (VEHPE) has improved fatigue strength and wear resistance compared to virgin high pressure crystallized (HP) UHMWPE. This suggested different mechanisms of wear reduction and fatigue crack propagation resistance in UHMWPE. PMID:19135247

  2. Polyimides containing pendent siloxane groups

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); St.clair, Terry L. (Inventor); Hergenrother, Paul M. (Inventor)

    1994-01-01

    Novel polyimides containing pendent siloxane groups (PISOX) were prepared by the reaction of functionalized siloxane compounds with hydroxy containing polyimides (PIOH). The pendent siloxane groups on the polyimide backbone offer distinct advantages such as lowering the dielectric constant and moisture resistance and enhanced atomic oxygen resistance. The siloxane containing polyimides are potentially useful as protective silicon oxide coatings and are useful for a variety of applications where atomic oxygen resistance is needed.

  3. German aircraft accident statistics, 1930

    NASA Technical Reports Server (NTRS)

    Weitzmann, Ludwig

    1932-01-01

    The investigation of all serious accidents, involving technical defects in the airplane or engine, is undertaken by the D.V.L. in conjunction with the imperial traffic minister and other interested parties. All accidents not clearly explained in the reports are subsequently cleared up.

  4. Weather types and traffic accidents.

    PubMed

    Klaić, Z B

    2001-06-01

    Traffic accident data for the Zagreb area for the 1981-1982 period were analyzed to investigate possible relationships between the daily number of accidents and the weather conditions that occurred for the 5 consecutive days, starting two days before the particular day. In the statistical analysis of low accident days weather type classification developed by Poje was used. For the high accident days a detailed analyses of surface and radiosonde data were performed in order to identify possible front passages. A test for independence by contingency table confirmed that conditional probability of the day with small number of accidents is the highest, provided that one day after it "N" or "NW" weather types occur, while it is the smallest for "N1" and "Bc" types. For the remaining 4 days of the examined periods dependence was not statistically confirmed. However, northern ("N", "NE" and "NW") and anticyclonic ("Vc", "V4", "V3", "V2" and "mv") weather types predominated during 5-days intervals related to the days with small number of accidents. On the contrary, the weather types with cyclonic characteristics ("N1", "N2", "N3", "Bc", "Dol1" and "Dol"), that are generally accompanied by fronts, were the rarest. For 85% days with large number of accidents, which had not been caused by objective circumstances (such as poor visibility, damaged or slippery road etc.), at least one front passage was recorded during the 3-days period, starting one day before the day with large number of accidents. PMID:11787547

  5. First Responders and Criticality Accidents

    SciTech Connect

    Valerie L. Putman; Douglas M. Minnema

    2005-11-01

    Nuclear criticality accident descriptions typically include, but do not focus on, information useful to first responders. We studied these accidents, noting characteristics to help (1) first responders prepare for such an event and (2) emergency drill planners develop appropriate simulations for training. We also provide recommendations to help people prepare for such events in the future.

  6. 49 CFR 195.50 - Reporting accidents.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An accident...) Explosion or fire not intentionally set by the operator. (b) Release of 5 gallons (19 liters) or more...

  7. 49 CFR 195.50 - Reporting accidents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An accident...) Explosion or fire not intentionally set by the operator. (b) Release of 5 gallons (19 liters) or more...

  8. 49 CFR 195.50 - Reporting accidents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An accident...) Explosion or fire not intentionally set by the operator. (b) Release of 5 gallons (19 liters) or more...

  9. Defense High Level Waste Disposal Container System Description Document

    SciTech Connect

    N. E. Pettit

    2001-07-13

    The Defense High Level Waste Disposal Container System supports the confinement and isolation of waste within the Engineered Barrier System of the Monitored Geologic Repository (MGR). Disposal containers are loaded and sealed in the surface waste handling facilities, transferred to the underground through the accesses using a rail mounted transporter, and emplaced in emplacement drifts. The defense high level waste (HLW) disposal container provides long-term confinement of the commercial HLW and defense HLW (including immobilized plutonium waste forms [IPWF]) placed within disposable canisters, and withstands the loading, transfer, emplacement, and retrieval loads and environments. US Department of Energy (DOE)-owned spent nuclear fuel (SNF) in disposable canisters may also be placed in a defense HLW disposal container along with commercial HLW waste forms, which is known as co-disposal. The Defense High Level Waste Disposal Container System provides containment of waste for a designated period of time, and limits radionuclide release. The disposal container/waste package maintains the waste in a designated configuration, withstands maximum handling and rockfall loads, limits the individual canister temperatures after emplacement, resists corrosion in the expected handling and repository environments, and provides containment of waste in the event of an accident. Defense HLW disposal containers for HLW disposal will hold up to five HLW canisters. Defense HLW disposal containers for co-disposal will hold up to five HLW canisters arranged in a ring and one DOE SNF canister inserted in the center and/or one or more DOE SNF canisters displacing a HLW canister in the ring. Defense HLW disposal containers also will hold two Multi-Canister Overpacks (MCOs) and two HLW canisters in one disposal container. The disposal container will include outer and inner cylinders, outer and inner cylinder lids, and may include a canister guide. An exterior label will provide a means by

  10. Industrial accidents triggered by lightning.

    PubMed

    Renni, Elisabetta; Krausmann, Elisabeth; Cozzani, Valerio

    2010-12-15

    Natural disasters can cause major accidents in chemical facilities where they can lead to the release of hazardous materials which in turn can result in fires, explosions or toxic dispersion. Lightning strikes are the most frequent cause of major accidents triggered by natural events. In order to contribute towards the development of a quantitative approach for assessing lightning risk at industrial facilities, lightning-triggered accident case histories were retrieved from the major industrial accident databases and analysed to extract information on types of vulnerable equipment, failure dynamics and damage states, as well as on the final consequences of the event. The most vulnerable category of equipment is storage tanks. Lightning damage is incurred by immediate ignition, electrical and electronic systems failure or structural damage with subsequent release. Toxic releases and tank fires tend to be the most common scenarios associated with lightning strikes. Oil, diesel and gasoline are the substances most frequently released during lightning-triggered Natech accidents. PMID:20817399

  11. Mechanisms of cinnamon extract-induced suppression of the intestinal overproduction of apolipoprotein B48-containing lipoproteins in insulin resistant high-fructose fed animals

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We have reported previously that cinnamon extract (CE) prevents high-fructose (HF) feeding-induced whole-body insulin resistance by enhancing insulin signaling in skeletal muscle. In this study, we investigated whether intestinal apolipoprotein overproduction is inhibited by CE in this insulin-resis...

  12. In-vitro long term and electrochemical corrosion resistance of cold deformed nitrogen containing austenitic stainless steels in simulated body fluid.

    PubMed

    Talha, Mohd; Behera, C K; Sinha, O P

    2014-07-01

    This work was focused on the evaluation of the corrosion behavior of deformed (10% and 20% cold work) and annealed (at 1050 °C for 15 min followed by water quenching) Ni-free high nitrogen austenitic stainless steels (HNSs) in simulated body fluid at 37°C using weight loss method (long term), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. Scanning electron microscopy (SEM) was used to understand the surface morphology of the alloys after polarization test. It has been observed that cold working had a significant influence on the corrosion resistant properties of these alloys. The weight loss and corrosion rates were observed to decrease with increasing degree of cold working and nitrogen content in the alloy. The corrosion resistance of the material is directly related to the resistance of the passive oxide film formed on its surface which was enhanced with cold working and nitrogen content. It was also observed that corrosion current densities were decreased and corrosion potentials were shifted to more positive values. By seeing pit morphology under SEM, shallower and smaller pits were associated with HNSs and cold worked samples, indicating that corrosion resistance increases with increasing nitrogen content and degree of cold deformation. X-ray diffraction profiles of annealed as well as deformed alloys were revealed and there is no evidence for formation of martensite or any other secondary phases. PMID:24857514

  13. Growth performance, immune response and resistance to Streptococcus iniae of Nile tilapia fed diets containing various levels of vitamins C and E

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effect of dietary levels of vitamin C (0, 100, 2,000 mg/kg), E (0, 50, 500 mg/kg), and their interaction on growth performance, immune response and resistance of Nile tilapia, Oreochromis niloticus to Sterptococcus iniae challenge were evaluated. Each diet was fed to Nile tilapia in triplicate a...

  14. Rapid evolutionary dynamics in a 2.8-Mb chromosomal region containing multiple prolamin and resistance gene families in Aegilops tauschii

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The prolamin (seed storage proteins high in glutamine and proline) and resistance gene families are important in domesticated bread wheat (Triticum aestivum) food uses and in defense against pathogen attacks, respectively. To better understand the evolution of these multi-gene families, the DNA se...

  15. Growth, body composition, immune response and resistance to Streptococcus iniae of hybrid tilapia, Oreochromis niloticus x O. aureaus, fed diets containing various levels of linoleic and linolenic acids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effects of various levels of dietary linoleic (LA) and linolenic acids (LN) on growth, body proximate and fatty acid composition, immune response and resistance to Streptococcus iniae of juvenile, sex-reversed all-male hybrid tilapia, Oreochromis niloticus x O. areaus, were evaluated. A basal pu...

  16. Severe Accident Scoping Simulations of Accident Tolerant Fuel Concepts for BWRs

    SciTech Connect

    Robb, Kevin R.

    2015-08-01

    CrAl would tend to generate heat and hydrogen from oxidation at a slower rate compared to the zirconium-based alloys in use today. The previous study, [2], of the FeCrAl ATF concept during station blackout (SBO) severe accident scenarios in BWRs was based on simulating short term SBO (STSBO), long term SBO (LTSBO), and modified SBO scenarios occurring in a BWR-4 reactor with MARK-I containment. The analysis indicated that FeCrAl had the potential to delay the onset of fuel failure by a few hours depending on the scenario, and it could delay lower head failure by several hours. The analysis demonstrated reduced in-vessel hydrogen production. However, the work was preliminary and was based on limited knowledge of material properties for FeCrAl. Limitations of the MELCOR code were identified for direct use in modeling ATF concepts. This effort used an older version of MELCOR (1.8.5). Since these analyses, the BWR model has been updated for use in MELCOR 1.8.6 [10], and more representative material properties for FeCrAl have been modeled. Sections 2 4 present updated analyses for the FeCrAl ATF concept response during severe accidents in a BWR. The purpose of the study is to estimate the potential gains afforded by the FeCrAl ATF concept during BWR SBO scenarios.

  17. Artemisinin resistance containment project in Thailand. (I): Implementation of electronic-based malaria information system for early case detection and individual case management in provinces along the Thai-Cambodian border

    PubMed Central

    2012-01-01

    Background The Bureau of Vector-borne Diseases, Ministry of Public Health, Thailand, has implemented an electronic Malaria Information System (eMIS) as part of a strategy to contain artemisinin resistance. The attempt corresponds to the WHO initiative, funded by the Bill & Melinda Gates Foundation, to contain anti-malarial drug resistance in Southeast Asia. The main objective of this study was to demonstrate the eMIS’ functionality and outputs after implementation for use in the Thailand artemisinin-resistance containment project. Methods The eMIS had been functioning since 2009 in seven Thai-Cambodian border provinces. The eMIS has covered 61 malaria posts/clinics, 27 Vector-borne Disease Units covering 12,508 hamlets at risk of malaria infections. The eMIS was designed as an evidence-based and near real-time system to capture data for early case detection, intensive case investigation, monitoring drug compliance and on/off-site tracking of malarial patients, as well as collecting data indicating potential drug resistance among patients. Data captured by the eMIS in 2008–2011 were extracted and presented. Results The core functionalities of the eMIS have been utilized by malaria staff at all levels, from local operational units to ministerial management. The eMIS case detection module suggested decreasing trends during 2009–2011; the number of malaria cases detected in the project areas over the years studied were 3818, 2695, and 2566, with sero-positive rates of 1.24, 0.98, and 1.16%, respectively. The eMIS case investigation module revealed different trends in weekly Plasmodium falciparum case numbers, when classified by responsible operational unit, local and migrant status, and case-detection type. It was shown that most Thai patients were infected within their own residential district, while migrants were infected either at their working village or from across the border. The data mapped in the system suggested that P. falciparum-infected cases and

  18. Columbia Accident Investigation Board

    NASA Technical Reports Server (NTRS)

    2003-01-01

    The Columbia Accident Investigation Board gathers for a second day for its third public hearing, held in Cape Canaveral, Florida. The CAIB was set up to examine STS-107 and analyze exploratory tests. Navy Admiral Harold W. 'Hal' Gehman Jr. was designated as the Chairman of the Board. From left to right in this photo sit Board Members Steven B. Wallace, Scott Hubbard, Dr. John Logsdon, Rear Admiral Stephen Turcotte, Hal Gehman, General Duane Deal, Dr. Douglas Osheroff, and Maj. General Kenneth W. Hess. Not shown are Maj. General John Barry, Dr. James N. Hallock, Roger Tetrault, Dr. Sheila Widnall, and Dr. Sally Ride. For more information on STS-107, please see GRIN Columbia General Explanation

  19. [The radiation accident].

    PubMed

    Stögmann, W

    1988-08-26

    The reactor accident of Chernobyl in April 1986 has shown us all the dangers which are inherent ever in the peaceful use of atomic energy. The effects of exposure to ionizing radiation are dependent on biological effectiveness, on dose, on duration of exposure and on the age of the exposed person (the younger the graver). Acute ionizing radiation of the whole body leads to radiation disease or radiation syndrome of different stages of severity according to dosage. If the patient survives other consequences of ionizing radiation may arise: non-stochastic effects such as cataracts, keloid formation, fibrosis of the lungs and infertility) and stochastic effects (oncogenesis and mutagenesis). The sensitivity to ionizing radiation is especially high in childhood because of the high velocity of cell metabolism and cell growth, the large body-surface area and because their repair mechanism following radiation damage is not yet. PMID:3188527

  20. Transport aircraft accident dynamics

    NASA Technical Reports Server (NTRS)

    Cominsky, A.

    1982-01-01

    A study was carried out of 112 impact survivable jet transport aircraft accidents (world wide) of 27,700 kg (60,000 lb.) aircraft and up extending over the last 20 years. This study centered on the effect of impact and the follow-on events on aircraft structures and was confined to the approach, landing and takeoff segments of the flight. The significant characteristics, frequency of occurrence and the effect on the occupants of the above data base were studied and categorized with a view to establishing typical impact scenarios for use as a basis of verifying the effectiveness of potential safety concepts. Studies were also carried out of related subjects such as: (1) assessment of advanced materials; (2) human tolerance to impact; (3) merit functions for safety concepts; and (4) impact analysis and test methods.

  1. Detection of New Methicillin-Resistant Staphylococcus aureus Clones Containing the Toxic Shock Syndrome Toxin 1 Gene Responsible for Hospital- and Community-Acquired Infections in France

    PubMed Central

    Durand, Geraldine; Bes, Michèle; Meugnier, Helene; Enright, Mark C.; Forey, Françoise; Liassine, Nadia; Wenger, Aline; Kikuchi, Ken; Lina, Gerard; Vandenesch, François; Etienne, Jerome

    2006-01-01

    Methicillin-resistant Staphylococcus aureus (MRSA) clones harboring the toxic shock syndrome toxin 1 (tst) gene have been detected in France and in Switzerland since 2002. During a passive survey conducted between 2002 and 2003, we collected 103 tst-positive S. aureus isolates from 42 towns in France, of which 27 were resistant to methicillin. The tst-positive MRSA belonged to two clones: a major clone comprising 25 isolates of sequence type (ST) 5 and agr group 2 and a minor clone comprising two isolates of ST30 and agr3. The tst-positive MRSA clones were associated with both hospital-acquired (12 cases) and community-acquired (8 cases) infections. The MRSA clones were mainly isolated from children (overall median age, 3 years). They caused a variety of clinical syndromes, including toxic shock syndrome and suppurative infections. Both clones were found to harbor a type IV staphylococcal chromosomal cassette mec (SCCmec) and to have similar antibiotic resistance profiles (usually resistant to oxacillin, kanamycin, and tobramycin and with intermediate resistance to fusidic acid). The origin of these clones is unclear. The tst-positive agr2 MRSA clone has the same sequence type (ST5) of two pandemic nosocomial MRSA clones, namely, the Pediatric clone and the New York/Japan clone. These findings suggest that all these clones are phylogenetically related. The pulsotype of the tst-positive MRSA clones differed from that of methicillin-sensitive S. aureus (MSSA) clones by a single band involving the SCCmec element. These findings suggest that the tst-positive MRSA clones may have emerged from their respective MSSA counterparts. PMID:16517865

  2. Accident Performance of Light Water Reactor Cladding Materials

    SciTech Connect

    Nelson, Andrew T.

    2012-07-24

    During a loss of coolant accident as experienced at Fukushima, inadequate cooling of the reactor core forces component temperatures ever higher where they must withstand aggressive chemical environments. Conventional zirconium cladding alloys will readily oxidize in the presence of water vapor at elevated temperatures, rapidly degrading and likely failing. A cladding breach removes the critical barrier between actinides and fission products and the coolant, greatly increasing the probability of the release of radioactivity in the event of a containment failure. These factors have driven renewed international interest in both study and improvement of the materials used in commercial light water reactors. Characterization of a candidate cladding alloy or oxidation mitigation technique requires understanding of both the oxidation kinetics and hydrogen production as a function of temperature and atmosphere conditions. Researchers in the MST division supported by the DOE-NE Fuel Cycle Research and Development program are working to evaluate and quantify these parameters across a wide range of proposed cladding materials. The primary instrument employed is a simultaneous thermal analyzer (STA) equipped with a specialized water vapor furnace capable of maintaining temperatures above 1200 C in a range of atmospheres and water vapor contents. The STA utilizes thermogravimetric analysis and a coupled mass spectrometer to measure in situ oxidation and hydrogen production of candidate materials. This capability is unprecedented in study of materials under consideration for reactor cladding use, and is currently being expanded to investigate proposed coating techniques as well as the effect of coating defects on corrosion resistance.

  3. A neutron dosemeter for nuclear criticality accidents.

    PubMed

    d'Errico, F; Curzio, G; Ciolini, R; Del Gratta, A; Nath, R

    2004-01-01

    A neutron dosemeter which offers instant read-out has been developed for nuclear criticality accidents. The system is based on gels containing emulsions of superheated dichlorodifluoromethane droplets, which vaporise into bubbles upon neutron irradiation. The expansion of these bubbles displaces an equivalent volume of gel into a graduated pipette, providing an immediate measure of the dose. Instant read-out is achieved using an array of transmissive optical sensors which consist of coupled LED emitters and phototransistor receivers. When the gel displaced in the pipette crosses the sensing region of the photomicrosensors, it generates a signal collected on a computer through a dedicated acquisition board. The performance of the device was tested during the 2002 International Accident Dosimetry Intercomparison in Valduc, France. The dosemeter was able to follow the initial dose gradient of a simulated accident, providing accurate values of neutron kerma; however, the emulsion was rapidly depleted of all its drops. A model of the depletion effects was developed and it indicates that an adequate dynamic range of the dose response can be achieved by using emulsions of smaller droplets. PMID:15353696

  4. Insulin-induced activation of glycerol-3-phosphate acyltransferase by a chiro-inositol-containing insulin mediator is defective in adipocytes of insulin-resistant, type II diabetic, Goto-Kakizaki rats.

    PubMed Central

    Farese, R V; Standaert, M L; Yamada, K; Huang, L C; Zhang, C; Cooper, D R; Wang, Z; Yang, Y; Suzuki, S; Toyota, T

    1994-01-01

    Type II diabetic Goto-Kakizaki (GK) rats were insulin-resistant in euglycemic-hyperinsulinemic clamp studies. We therefore examined insulin signaling systems in control Wistar and diabetic GK rats. Glycerol-3-phosphate acyltransferase (G3PAT), which is activated by headgroup mediators released from glycosyl-phosphatidylinositol (GPI), was activated by insulin in intact and cell-free adipocyte preparations of control, but not diabetic, rats. A specific chiro-inositol-containing inositol phosphoglycan (IPG) mediator, prepared from beef liver, bypassed this defect and comparably activated G3PAT in cell-free adipocyte preparations of both diabetic GK and control rats. A myo-inositol-containing IPG mediator did not activate G3PAT. Relative to control adipocytes, labeling of GPI by [3H]glucosamine was diminished by 50% and insulin failed to stimulate GPI hydrolysis in GK adipocytes. In contrast to GPI-dependent G3PAT activation, insulin-stimulated hexose transport was intact in adipocytes and soleus and gastrocnemius muscles of the GK rat, as was insulin-induced activation of mitogen-activated protein kinase and protein kinase C. We conclude that (i) chiro-inositol-containing IPG mediator activates G3PAT during insulin action, (ii) diabetic GK rats have a defect in synthesizing or releasing functional chiro-inositol-containing IPG, and (iii) defective IPG-regulated intracellular glucose metabolism contributes importantly to insulin resistance in diabetic GK rats. PMID:7972005

  5. Generation of insect-resistant and glyphosate-tolerant rice by introduction of a T-DNA containing two Bt insecticidal genes and an EPSPS gene*

    PubMed Central

    ZHAO, Qi-chao; LIU, Ming-hong; ZHANG, Xian-wen; LIN, Chao-yang; ZHANG, Qing; SHEN, Zhi-cheng

    2015-01-01

    Insect resistance and glyphosate tolerance have been two of the most important traits in the genetic improvement of various crops. In this study, two Bacillus thuringiensis (Bt) insecticidal genes, Cry1Ac and Cry1Ig, and a modified glyphosate-tolerant 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) gene (G10) were combined into a single transferred DNA (T-DNA) fragment and introduced into rice by Agrobacterium-mediated transformation. A transgenic line with single-copy T-DNA insertion named GAI-14 was found to be highly resistant to striped stem borer and rice leaf roller, and tolerant to glyphosate. Analysis of T-DNA border sequence suggested that the transgenes were inserted at the chromosome 3 and appeared to have not interrupted any known or putative genes. A field trial observed no significant difference in the basic agronomic traits between GAI-14 and the recipient rice. PMID:26465130

  6. Generation of insect-resistant and glyphosate-tolerant rice by introduction of a T-DNA containing two Bt insecticidal genes and an EPSPS gene.

    PubMed

    Zhao, Qi-chao; Liu, Ming-hong; Zhang, Xian-wen; Lin, Chao-yang; Zhang, Qing; Shen, Zhi-cheng

    2015-10-01

    Insect resistance and glyphosate tolerance have been two of the most important traits in the genetic improvement of various crops. In this study, two Bacillus thuringiensis (Bt) insecticidal genes, Cry1Ac and Cry1Ig, and a modified glyphosate-tolerant 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) gene (G10) were combined into a single transferred DNA (T-DNA) fragment and introduced into rice by Agrobacterium-mediated transformation. A transgenic line with single-copy T-DNA insertion named GAI-14 was found to be highly resistant to striped stem borer and rice leaf roller, and tolerant to glyphosate. Analysis of T-DNA border sequence suggested that the transgenes were inserted at the chromosome 3 and appeared to have not interrupted any known or putative genes. A field trial observed no significant difference in the basic agronomic traits between GAI-14 and the recipient rice. PMID:26465130

  7. [Hidden statistics of traffic accidents].

    PubMed

    Nordentoft, E L; Larsen, C F; Jørgensen, H R

    1989-10-23

    Only 19% of the 3,071 injured persons who were treated in the casualty department of Odense Hospital following traffic accidents in 1987 could be found again in the police registers of traffic accidents from the same region. All of the registrations from the police registers from the central region could be found again in the casualty department. In 1971, the corresponding coverage was 36%. The degree of coverage is particularly low for single bicycle accidents, other bicycle accidents, other single accidents and the hours immediately after midnight. Considerable disagreement exists concerning registration of the use of safety belts and crash helmets. In Odense, the municipal road authorities utilize the localization of the accidents reported by the casualty department. The decrease in the degree of coverage is due mainly to an increasing proportion of bicycle accidents. Where casualties require admission to hospital, the coverage is approximately 75%. This has remained unchanged throughout the years and it is therefore suggested that this proportion should be employed as indicator of the effect of the majority of prophylactic measures. In addition, proposals are made for simplification of the police registration forms. PMID:2588362

  8. Analysis of Waste Leak and Toxic Chemical Release Accidents from Waste Feed Delivery (WFD) Diluent System

    SciTech Connect

    WILLIAMS, J.C.

    2000-09-15

    Radiological and toxicological consequences are calculated for 4 postulated accidents involving the Waste Feed Delivery (WFD) diluent addition systems. Consequences for the onsite and offsite receptor are calculated. This analysis contains technical information used to determine the accident consequences for the River Protection Project (RPP) Final Safety Analysis Report (FSAR).

  9. The Quantitative Study of Communicational Success: Politeness and Accidents in Aviation Discourse.

    ERIC Educational Resources Information Center

    Linde, Charlotte

    Part of a larger research program studying communication in the cockpit, this study investigated the occurrence of mitigation, that is, the use of linguistic forms that convey propositional content without giving offense, and its relationship to aviation accidents. The data were from flight-recorder accident transcripts containing observable…

  10. Safety in Academic Chemistry Laboratories: Volume 2. Accident Prevention for Faculty and Administrators, 7th Edition.

    ERIC Educational Resources Information Center

    American Chemical Society, Washington, DC.

    This book contains volume 2 of 2 and describes safety guidelines for academic chemistry laboratories to prevent accidents for college and university students. Contents include: (1) "Organizing for Accident Prevention"; (2) "Personal Protective Equipment"; (3) "Labeling"; (4) "Material Safety Data Sheets (MSDSs)"; (5) "Preparing for Medical…

  11. Cauliflower mosaic virus gene VI product N-terminus contains regions involved in resistance-breakage, self-association and interactions with movement protein

    PubMed Central

    Hapiak, Michael; Li, Yongzhong; Agama, Keli; Swade, Shaddy; Okenka, Genevieve; Falk, Jessica; Khandekar, Sushant; Raikhy, Gaurav; Anderson, Alisha; Pollock, Justin; Zellner, Wendy; Schoelz, James; Leisner, Scott M.

    2008-01-01

    Cauliflower mosaic virus (CaMV) gene VI encodes a multifunctional protein (P6) involved in the translation of viral RNA, the formation of inclusion bodies, and the determination of host range. Arabidopsis thaliana ecotype Tsu-0 prevents the systemic spread of most CaMV isolates, including CM1841. However, CaMV isolate W260 overcomes this resistance. In this paper, the N-terminal 110 amino acids of P6 (termed D1) were identified as the resistance-breaking region. D1 also bound full-length P6. Furthermore, binding of W260 D1 to P6 induced higher β-galactosidase activity and better leucine-independent growth in the yeast two-hybrid system than its CM1841 counterpart. Thus, W260 may evade Tsu-0 resistance by mediating P6 self-association in a manner different from that of CM1841. Because Tsu-0 resistance prevents virus movement, interaction of P6 with P1 (CaMV movement protein) was investigated. Both yeast two-hybrid analyses and maltose-binding protein pull-down experiments show that P6 interacts with P1. Although neither half of P1 interacts with P6, the N-terminus of P6 binds P1. Interestingly, D1 by itself does not interact with P1, indicating that different portions of the P6 N-terminus are involved in different activities. The P1-P6 interactions suggest a role for P6 in virus transport, possibly by regulating P1 tubule formation or the assembly of movement complexes. PMID:18851998

  12. MELCOR analyses of severe accident scenarios in Oconee, a B&W PWR plant

    SciTech Connect

    Madni, I.K.; Nimnual, S.; Foulds, R.

    1993-03-01

    This paper presents the results and insights gained from MELCOR analyses of two severe accident scenarios, a Loss of Coolant Accident (LOCA) and a Station Blackout (TMLB) in Oconee, a Babcock & Wilcox (B&W) designed PWR with a large dry containment, and comparisons with Source Term Code Package (STCP) calculations of the same sequences. Results include predicted timing of key events, thermal-hydraulic response in the reactor coolant system and containment, and environmental releases of fission products. The paper also explores the impact of varying concrete type, vessel failure temperature, and break location on the accident progression, containment pressurization, and environmental releases of radionuclides.

  13. MELCOR analyses of severe accident scenarios in Oconee, a B W PWR plant

    SciTech Connect

    Madni, I.K.; Nimnual, S. ); Foulds, R. )

    1993-01-01

    This paper presents the results and insights gained from MELCOR analyses of two severe accident scenarios, a Loss of Coolant Accident (LOCA) and a Station Blackout (TMLB) in Oconee, a Babcock Wilcox (B W) designed PWR with a large dry containment, and comparisons with Source Term Code Package (STCP) calculations of the same sequences. Results include predicted timing of key events, thermal-hydraulic response in the reactor coolant system and containment, and environmental releases of fission products. The paper also explores the impact of varying concrete type, vessel failure temperature, and break location on the accident progression, containment pressurization, and environmental releases of radionuclides.

  14. OFFSITE RADIOLOGICAL CONSEQUENCE ANALYSIS FOR THE BOUNDING FLAMMABLE GAS ACCIDENT

    SciTech Connect

    KRIPPS, L.J.

    2005-02-18

    This document quantifies the offsite radiological consequences of the bounding flammable gas accident for comparison with the 25 rem Evaluation Guideline established in DOE-STD-3009, Appendix A. The bounding flammable gas accident is a detonation in a SST. The calculation applies reasonably conservative input parameters in accordance with guidance in DOE-STD-3009, Appendix A. The purpose of this analysis is to calculate the offsite radiological consequence of the bounding flammable gas accident. DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', requires the formal quantification of a limited subset of accidents representing a complete set of bounding conditions. The results of these analyses are then evaluated to determine if they challenge the DOE-STD-3009-94, Appendix A, ''Evaluation Guideline,'' of 25 rem total effective dose equivalent in order to identify and evaluate safety-class structures, systems, and components. The bounding flammable gas accident is a detonation in a single-shell tank (SST). A detonation versus a deflagration was selected for analysis because the faster flame speed of a detonation can potentially result in a larger release of respirable material. A detonation in an SST versus a double-shell tank (DST) was selected as the bounding accident because the estimated respirable release masses are the same and because the doses per unit quantity of waste inhaled are greater for SSTs than for DSTs. Appendix A contains a DST analysis for comparison purposes.

  15. Polyethylene Nanocomposites for the Next Generation of Ultralow-Transmission-Loss HVDC Cables: Insulation Containing Moisture-Resistant MgO Nanoparticles.

    PubMed

    Pourrahimi, Amir Masoud; Pallon, Love K H; Liu, Dongming; Hoang, Tuan Anh; Gubanski, Stanislaw; Hedenqvist, Mikael S; Olsson, Richard T; Gedde, Ulf W

    2016-06-15

    The use of MgO nanoparticles in polyethylene for cable insulation has attracted considerable interest, although in humid media the surface regions of the nanoparticles undergo a conversion to a hydroxide phase. A facile method to obtain MgO nanoparticles with a large surface area and remarkable inertness to humidity is presented. The method involves (a) low temperature (400 °C) thermal decomposition of Mg(OH)2, (b) a silicone oxide coating to conceal the nanoparticles and prevent interparticle sintering upon exposure to high temperatures, and (c) heat treatment at 1000 °C. The formation of the hydroxide phase on these silicone oxide-coated MgO nanoparticles after extended exposure to humid air was assessed by thermogravimetry, infrared spectroscopy, and X-ray diffraction. The nanoparticles showed essentially no sign of any hydroxide phase compared to particles prepared by the conventional single-step thermal decomposition of Mg(OH)2. The moisture-resistant MgO nanoparticles showed improved dispersion and interfacial adhesion in the LDPE matrix with smaller nanosized particle clusters compared with conventionally prepared MgO. The addition of 1 wt % moisture-resistant MgO nanoparticles was sufficient to decrease the conductivity of polyethylene 30 times. The reduction in conductivity is discussed in terms of defect concentration on the surface of the moisture-resistant MgO nanoparticles at the polymer/nanoparticle interface. PMID:27203860

  16. A review of criticality accidents

    SciTech Connect

    Stratton, W R; Smith, D R

    1989-03-01

    Criticality accidents and the characteristics of prompt power excursions are discussed. Forty-one accidental power transients are reviewed. In each case where available, enough detail is given to help visualize the physical situation, the cause or causes of the accident, the history and characteristics of the transient, the energy release, and the consequences, if any, to personnel and property. Excursions associated with large power reactors are not included in this study, except that some information on the major accident at the Chernobyl reactor in April 1986 is provided in the Appendix. 67 refs., 21 figs., 2 tabs.

  17. [Prevention of bicycle accidents].

    PubMed

    Zwipp, H; Barthel, P; Bönninger, J; Bürkle, H; Hagemeister, C; Hannawald, L; Huhn, R; Kühn, M; Liers, H; Maier, R; Otte, D; Prokop, G; Seeck, A; Sturm, J; Unger, T

    2015-04-01

    For a very precise analysis of all injured bicyclists in Germany it would be important to have definitions for "severely injured", "seriously injured" and "critically injured". By this, e.g., two-thirds of surgically treated bicyclists who are not registered by the police could become available for a general analysis. Elderly bicyclists (> 60 years) are a minority (10 %) but represent a majority (50 %) of all fatalities. They profit most by wearing a helmet and would be less injured by using special bicycle bags, switching on their hearing aids and following all traffic rules. E-bikes are used more and more (145 % more in 2012 vs. 2011) with 600,000 at the end of 2011 and are increasingly involved in accidents but still have a lack of legislation. So even for pedelecs 45 with 500 W and a possible speed of 45 km/h there is still no legislative demand for the use of a protecting helmet. 96 % of all injured cyclists in Germany had more than 0.5 ‰ alcohol in their blood, 86 % more than 1.1 ‰ and 59 % more than 1.7 ‰. Fatalities are seen in 24.2 % of cases without any collision partner. Therefore the ADFC calls for a limit of 1.1 ‰. Some virtual studies conclude that integrated sensors in bicycle helmets which would interact with sensors in cars could prevent collisions or reduce the severity of injury by stopping the cars automatically. Integrated sensors in cars with opening angles of 180° enable about 93 % of all bicyclists to be detected leading to a high rate of injury avoidance and/or mitigation. Hanging lamps reduce with 35 % significantly bicycle accidents for children, traffic education for children and special trainings for elderly bicyclists are also recommended as prevention tools. As long as helmet use for bicyclists in Germany rates only 9 % on average and legislative orders for using a helmet will not be in force in the near future, coming up campaigns seem to be necessary to be promoted by the Deutscher

  18. Underreporting of maritime accidents to vessel accident databases.

    PubMed

    Hassel, Martin; Asbjørnslett, Bjørn Egil; Hole, Lars Petter

    2011-11-01

    Underreporting of maritime accidents is a problem not only for authorities trying to improve maritime safety through legislation, but also to risk management companies and other entities using maritime casualty statistics in risk and accident analysis. This study collected and compared casualty data from 01.01.2005 to 31.12.2009, from IHS Fairplay and the maritime authorities from a set of nations. The data was compared to find common records, and estimation of the true number of occurred accidents was performed using conditional probability given positive dependency between data sources, several variations of the capture-recapture method, calculation of best case scenario assuming perfect reporting, and scaling up a subset of casualty information from a marine insurance statistics database. The estimated upper limit reporting performance for the selected flag states ranged from 14% to 74%, while the corresponding estimated coverage of IHS Fairplay ranges from 4% to 62%. On average the study results document that the number of unreported accidents makes up roughly 50% of all occurred accidents. Even in a best case scenario, only a few flag states come close to perfect reporting (94%). The considerable scope of underreporting uncovered in the study, indicates that users of statistical vessel accident data should assume a certain degree of underreporting, and adjust their analyses accordingly. Whether to use correction factors, a safety margin, or rely on expert judgment, should be decided on a case by case basis. PMID:21819835

  19. Container for hydrogen isotopes

    DOEpatents

    Solomon, David E.

    1977-01-01

    A container for the storage, shipping and dispensing of hydrogen isotopes such as hydrogen, deuterium, tritium, or mixtures of the same which has compactness, which is safe against fracture or accident, and which is reusable. The container consists of an outer housing with suitable inlet and outlet openings and electrical feed elements, the housing containing an activated sorber material in the form, for example, of titanium sponge or an activated zirconium aluminate cartridge. The gas to be stored is introduced into the chamber under conditions of heat and vacuum and will be retained in the sorber material. Subsequently, it may be released by heating the unit to drive off the stored gas at desired rates.

  20. The health impact of major nuclear accidents: the case of Greece.

    PubMed

    Kollas, J G

    1993-10-01

    An assessment of the radiological consequences that would result for the population of Greece from postulated major nuclear accidents in the Kozloduy nuclear power station in Bulgaria is performed. Kozloduy lies at a distance of 225 km from the northern borders of Greece and contains six reactors, all of the Russian WWER type. The postulated accidents that are classified as level 7 accidents on the International Nuclear Event Scale, involve significant releases of radioactive materials into the environment, and widespread health and environmental effects. The analysis is performed by the MACCS code. The estimated consequences are compared to the corresponding actual impact of the Chernobyl accident in Greece. The results of the analysis indicate that, under the conservative assumptions adopted, the radiological consequences of the most severe accidents considered would be about 1.5 orders of magnitude larger than the actual radiological consequences of the Chernobyl accident. PMID:8259439

  1. Ferritic Alloys as Accident Tolerant Fuel Cladding Material for Light Water Reactors

    SciTech Connect

    Rebak, Raul B.

    2014-12-30

    The objective of the GE project is to demonstrate that advanced steels such as iron-chromium-aluminum (FeCrAl) alloys could be used as accident tolerant fuel cladding material in commercial light water reactors. The GE project does not include fuel development. Current findings support the concept that a FeCrAl alloy could be used for the cladding of commercial nuclear fuel. The use of this alloy will benefit the public since it is going to make the power generating light water reactors safer. In the Phase 1A of this cost shared project, GE (GRC + GNF) teamed with the University of Michigan, Los Alamos National Laboratory, Brookhaven National Laboratory, Idaho National Laboratory, and Oak Ridge National Laboratory to study the environmental and mechanical behavior of more than eight candidate cladding materials both under normal operation conditions of commercial nuclear reactors and under accident conditions in superheated steam (loss of coolant condition). The main findings are as follows: (1) Under normal operation conditions the candidate alloys (e.g. APMT, Alloy 33) showed excellent resistance to general corrosion, shadow corrosion and to environmentally assisted cracking. APMT also showed resistance to proton irradiation up to 5 dpa. (2) Under accident conditions the selected candidate materials showed several orders of magnitude improvement in the reaction with superheated steam as compared with the current zirconium based alloys. (3) Tube fabrication feasibility studies of FeCrAl alloys are underway. The aim is to obtain a wall thickness that is below 400 µm. (4) A strategy is outlined for the regulatory path approval and for the insertion of a lead fuel assembly in a commercial reactor by 2022. (5) The GE team worked closely with INL to have four rodlets tested in the ATR. GE provided the raw stock for the alloys, the fuel for the rodlets and the cost for fabrication/welding of the rodlets. INL fabricated the rodlets and the caps and welded them to

  2. Focused Screening and Treatment (FSAT): A PCR-Based Strategy to Detect Malaria Parasite Carriers and Contain Drug Resistant P. falciparum, Pailin, Cambodia

    PubMed Central

    Hoyer, Stefan; Nguon, Sokomar; Kim, Saorin; Habib, Najibullah; Khim, Nimol; Sum, Sarorn; Christophel, Eva-Maria; Bjorge, Steven; Thomson, Andrew; Kheng, Sim; Chea, Nguon; Yok, Sovann; Top, Samphornarann; Ros, Seyha; Sophal, Uth; Thompson, Michelle M.; Mellor, Steve; Ariey, Frédéric; Witkowski, Benoit; Yeang, Chhiang; Yeung, Shunmay; Duong, Socheat; Newman, Robert D.; Menard, Didier

    2012-01-01

    Recent studies have shown that Plasmodium falciparum malaria parasites in Pailin province, along the border between Thailand and Cambodia, have become resistant to artemisinin derivatives. To better define the epidemiology of P. falciparum populations and to assess the risk of the possible spread of these parasites outside Pailin, a new epidemiological tool named “Focused Screening and Treatment” (FSAT), based on active molecular detection of asymptomatic parasite carriers was introduced in 2010. Cross-sectional malariometric surveys using PCR were carried out in 20 out of 109 villages in Pailin province. Individuals detected as P. falciparum carriers were treated with atovaquone-proguanil combination plus a single dose of primaquine if the patient was non-G6PD deficient. Interviews were conducted to elicit history of cross-border travel that might contribute to the spread of artemisinin-resistant parasites. After directly observed treatment, patients were followed up and re-examined on day 7 and day 28. Among 6931 individuals screened, prevalence of P. falciparum carriers was less than 1%, of whom 96% were asymptomatic. Only 1.6% of the individuals had a travel history or plans to go outside Cambodia, with none of those tested being positive for P. falciparum. Retrospective analysis, using 2010 routine surveillance data, showed significant differences in the prevalence of asymptomatic carriers discovered by FSAT between villages classified as “high risk” and “low risk” based on malaria incidence data. All positive individuals treated and followed-up until day 28 were cured. No mutant-type allele related to atovaquone resistance was found. FSAT is a potentially useful tool to detect, treat and track clusters of asymptomatic carriers of P. falciparum along with providing valuable epidemiological information regarding cross-border movements of potential malaria parasite carriers and parasite gene flow. PMID:23049687

  3. Columbia Accident Probe Widens

    NASA Technical Reports Server (NTRS)

    Covault, Craig

    2003-01-01

    The Columbia Accident Investigation Board has identified about a dozen shuttle program safety concerns it will address in its final report, in addition to foam shedding from the Lockheed Martin external tank-believed by many board members to be the direct cause for the loss of Columbia and her crew. As new evidence narrows the location of Columbia's left-wing breach to a lower corner of reinforced carbon-carbon (RCC) Panel 8 and its adjoining T-seal, the board is broadening its penetration of other shuttle safety issues. As the board works in Houston, United Space Alliance technicians here at Kennedy last week sent the first six of 22 RCC panels from the orbiter Atlantis left wing to Vought Aircraft Industries Inc. in Dallas for extensive testing to assess their integrity. The move is a key step toward both returning the shuttle to flight with Atlantis and obtaining more data on RCC panels subjected to fewer flights, and less exposure to the weather, than the older panels used on Columbia.

  4. 49 CFR 178.345-8 - Accident damage protection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Accident damage protection. 178.345-8 Section 178.345-8 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for...

  5. 49 CFR 178.337-10 - Accident damage protection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Accident damage protection. 178.337-10 Section 178.337-10 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for...

  6. Aircraft accidents : method of analysis

    NASA Technical Reports Server (NTRS)

    1929-01-01

    This report on a method of analysis of aircraft accidents has been prepared by a special committee on the nomenclature, subdivision, and classification of aircraft accidents organized by the National Advisory Committee for Aeronautics in response to a request dated February 18, 1928, from the Air Coordination Committee consisting of the Assistant Secretaries for Aeronautics in the Departments of War, Navy, and Commerce. The work was undertaken in recognition of the difficulty of drawing correct conclusions from efforts to analyze and compare reports of aircraft accidents prepared by different organizations using different classifications and definitions. The air coordination committee's request was made "in order that practices used may henceforth conform to a standard and be universally comparable." the purpose of the special committee therefore was to prepare a basis for the classification and comparison of aircraft accidents, both civil and military. (author)

  7. 49 CFR 801.32 - Accident reports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Accident reports. 801.32 Section 801.32... PUBLIC AVAILABILITY OF INFORMATION Accident Investigation Records § 801.32 Accident reports. (a) The NTSB....S. civil transportation accidents, in accordance with 49 U.S.C. 1131(e). (b) These reports may...

  8. 29 CFR 1960.29 - Accident investigation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 9 2011-07-01 2011-07-01 false Accident investigation. 1960.29 Section 1960.29 Labor... MATTERS Inspection and Abatement § 1960.29 Accident investigation. (a) While all accidents should be investigated, including accidents involving property damage only, the extent of such investigation shall...

  9. 49 CFR 195.54 - Accident reports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Accident reports. 195.54 Section 195.54... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.54 Accident reports. (a) Each operator that experiences an accident that is required to be reported under § 195.50 must, as soon...

  10. 49 CFR 230.22 - Accident reports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Accident reports. 230.22 Section 230.22... Requirements § 230.22 Accident reports. In the case of an accident due to failure, from any cause, of a steam... persons, the railroad on whose line the accident occurred shall immediately make a telephone report of...

  11. 49 CFR 845.40 - Accident report.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Accident report. 845.40 Section 845.40... RULES OF PRACTICE IN TRANSPORTATION; ACCIDENT/INCIDENT HEARINGS AND REPORTS Board Reports § 845.40 Accident report. (a) The Board will issue a detailed narrative accident report in connection with...

  12. 29 CFR 1960.29 - Accident investigation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Accident investigation. 1960.29 Section 1960.29 Labor... MATTERS Inspection and Abatement § 1960.29 Accident investigation. (a) While all accidents should be investigated, including accidents involving property damage only, the extent of such investigation shall...

  13. 49 CFR 230.22 - Accident reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Accident reports. 230.22 Section 230.22... Requirements § 230.22 Accident reports. In the case of an accident due to failure, from any cause, of a steam... persons, the railroad on whose line the accident occurred shall immediately make a telephone report of...

  14. 49 CFR 195.54 - Accident reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Accident reports. 195.54 Section 195.54... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.54 Accident reports. (a) Each operator that experiences an accident that is required to be reported under § 195.50 shall as soon...

  15. 49 CFR 845.40 - Accident report.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Accident report. 845.40 Section 845.40... RULES OF PRACTICE IN TRANSPORTATION; ACCIDENT/INCIDENT HEARINGS AND REPORTS Board Reports § 845.40 Accident report. (a) The Board will issue a detailed narrative accident report in connection with...

  16. 49 CFR 801.32 - Accident reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Accident reports. 801.32 Section 801.32... PUBLIC AVAILABILITY OF INFORMATION Accident Investigation Records § 801.32 Accident reports. (a) The NTSB....S. civil transportation accidents, in accordance with 49 U.S.C. 1131(e). (b) These reports may...

  17. Spine Immobilizer for Accident Victims

    NASA Technical Reports Server (NTRS)

    Vykukal, H. C.; Lampson, K.

    1983-01-01

    Proposed conformal bladder filled with tiny spheres called "microballoons," enables spine of accident victim to be rapidly immobilized and restrained and permit victim to be safely removed from accident scene in extremely short time after help arrives. Microballoons expand to form rigid mass when pressure within bladder is less than ambient. Bladder strapped to victim is also strapped to rescue chair. Void between bladder and chair is filled with cloth wedges.

  18. The Drosophila melanogaster multidrug-resistance protein 1 (MRP1) homolog has a novel gene structure containing two variable internal exons.

    PubMed

    Grailles, Marine; Brey, Paul T; Roth, Charles W

    2003-03-27

    Drosophila melanogaster has a gene very similar to human MRP1 that encodes a full ABC-transporter containing three membrane-spanning domains and two nucleotide-binding domains. This 19 exon insect gene, dMRP (FBgn0032456), spans slightly more than 22 kb. The cDNA SD07655 representing this gene was sequenced and found to contain sequences from 12 exons including single copies of two exons having multiple genomic copies. The gene contains two variant copies of exon 4 and seven of exon 8. While a cDNA contains only one version of each variable exon, all forms of these variable exons were detected in adult fly mRNA. These results predict that Drosophila could make 14 different MRP isoforms from a single gene by substituting different variable exons. This is the first report of any organism using differential splicing of alternative, internal exons, to produce such a large array of MRP isoforms having the same size, but with limited and defined internal variations. Defining the functional differences in the dMRP isoforms should provide clues to the structure/function relationships of the amino acids in these MRP domains, both for the insect enzyme and for those of other species. PMID:12706887

  19. Design study status of compact containment BWR

    SciTech Connect

    Heki, H.; Nakamaru, M.; Kuroki, M.; Kojima, Y.; Arai, K.; Tahara, M.; Hoshi, T.

    2006-07-01

    The reactor concept considered in this paper has a relatively mid/small power output, a compact containment and a simplified BWR configuration with comprehensive safety features. The Japan Atomic Power Company has been taking initiative in developing the concept of the Compact Containment Boiling Water Reactor (CCR). The CCR., which is being developed with matured BWR technologies together with innovative systems/components, is expected to prove attractive in the world energy markets due to its flexibility in regard to energy demands and site conditions, its high potential for reducing investment risk and its safety features facilitating public acceptance. The flexibility is achieved by CCR's relatively mid/small power output of 400 MWe class and capability of long operating cycle (refueling intervals). CCR is expected to be attractive from view point of investment due to its simplification/innovation in design such as natural circulation core cooling with the bottom located short core, upper entry control rod drives (CRDs) and simplified safety system with high pressure resistible containment concept. The natural circulation core eliminates recirculation pumps and the maintenance of such pumps. The upper entry CRDs enable a simplified safety system followed by in-vessel retention (IVR) capability with the compact primary containment vessel (PCV). The safety features mainly consist of large water inventory above the core without large penetration of RPV below the top of the core height, passive cooling system by isolation condenser (IC). The large inventory increases the system response time in the case of design-base accidents, including loss of coolant accidents. The IC suppresses PCV pressure by steam condensation without any AC power. Cooling the molten core inside the RPV if the core should be damaged by loss of core coolability could attain the IVR. Further core design study has been carried out taking into account compact reactor size and reduction of fuel

  20. Nuclear fuel cycle facility accident analysis handbook

    SciTech Connect

    Ayer, J E; Clark, A T; Loysen, P; Ballinger, M Y; Mishima, J; Owczarski, P C; Gregory, W S; Nichols, B D

    1988-05-01

    The Accident Analysis Handbook (AAH) covers four generic facilities: fuel manufacturing, fuel reprocessing, waste storage/solidification, and spent fuel storage; and six accident types: fire, explosion, tornado, criticality, spill, and equipment failure. These are the accident types considered to make major contributions to the radiological risk from accidents in nuclear fuel cycle facility operations. The AAH will enable the user to calculate source term releases from accident scenarios manually or by computer. A major feature of the AAH is development of accident sample problems to provide input to source term analysis methods and transport computer codes. Sample problems and illustrative examples for different accident types are included in the AAH.

  1. Structural response of rectilinear containment to overpressurization

    SciTech Connect

    Pfeiffer, P.A.; Kulak, R.F.

    1995-07-01

    Containment structures for nuclear reactors are the final barrier between released radionuclides and the public. Containment structures are constructed from steel, reinforced concrete, or prestressed concrete. US nuclear reactor containment geometries tend to be cylindrical with elliptical or hemispherical heads. The older Soviet designed reactors do not use a containment building to mitigate the effects of accidents. Instead, they employ a sealed set of rectilinear, interconnected compartments, collectively called the accident localization system (ALS), to reduce the release of radionuclides to the atmosphere during accidents. The purpose of this paper is to present a methodology that can be used to find the structural capacity of reinforced concrete structures. The method is applicable to both cylindrical and rectilinear geometries. As an illustrative example, the methodology is applied to a generic VVER-440/V213 design.

  2. Accident Tolerant Fuel Analysis

    SciTech Connect

    Curtis Smith; Heather Chichester; Jesse Johns; Melissa Teague; Michael Tonks; Robert Youngblood

    2014-09-01

    Safety is central to the design, licensing, operation, and economics of Nuclear Power Plants (NPPs). Consequently, the ability to better characterize and quantify safety margin holds the key to improved decision making about light water reactor design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margins management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. The purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway research and development (R&D) is to support plant decisions for risk-informed margins management by improving economics and reliability, and sustaining safety, of current NPPs. Goals of the RISMC Pathway are twofold: (1) Develop and demonstrate a risk-assessment method coupled to safety margin quantification that can be used by NPP decision makers as part of their margin recovery strategies. (2) Create an advanced “RISMC toolkit” that enables more accurate representation of NPP safety margin. In order to carry out the R&D needed for the Pathway, the Idaho National Laboratory is performing a series of case studies that will explore methods- and tools-development issues, in addition to being of current interest in their own right. One such study is a comparative analysis of safety margins of plants using different fuel cladding types: specifically, a comparison between current-technology Zircaloy cladding and a notional “accident-tolerant” (e.g., SiC-based) cladding. The present report begins the process of applying capabilities that are still under development to the problem of assessing new fuel designs. The approach and lessons learned from this case study will be included in future Technical Basis Guides produced by the RISMC Pathway. These guides will be the mechanism for developing the specifications for RISMC tools and for defining how plant decision makers should propose and

  3. Accident tolerant fuel analysis

    SciTech Connect

    Smith, Curtis; Chichester, Heather; Johns, Jesse; Teague, Melissa; Tonks, Michael Idaho National Laboratory; Youngblood, Robert

    2014-09-01

    Safety is central to the design, licensing, operation, and economics of Nuclear Power Plants (NPPs). Consequently, the ability to better characterize and quantify safety margin holds the key to improved decision making about light water reactor design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margins management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. The purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway research and development (R&D) is to support plant decisions for risk-informed margins management by improving economics and reliability, and sustaining safety, of current NPPs. Goals of the RISMC Pathway are twofold: (1) Develop and demonstrate a risk-assessment method coupled to safety margin quantification that can be used by NPP decision makers as part of their margin recovery strategies. (2) Create an advanced ''RISMC toolkit'' that enables more accurate representation of NPP safety margin. In order to carry out the R&D needed for the Pathway, the Idaho National Laboratory is performing a series of case studies that will explore methods- and tools-development issues, in addition to being of current interest in their own right. One such study is a comparative analysis of safety margins of plants using different fuel cladding types: specifically, a comparison between current-technology Zircaloy cladding and a notional ''accident-tolerant'' (e.g., SiC-based) cladding. The present report begins the process of applying capabilities that are still under development to the problem of assessing new fuel designs. The approach and lessons learned from this case study will be included in future Technical Basis Guides produced by the RISMC Pathway. These guides will be the mechanism for developing the specifications for RISMC tools and for defining how plant decision makers should propose and

  4. Diminishing sign anomaly and scaling behavior of the mixed-state Hall resistivity in Tl2Ba2Ca2Cu3O10 films containing columnar defects

    NASA Technical Reports Server (NTRS)

    Budhani, R. C.; Liou, S. H.; Cai, Z. X.

    1993-01-01

    The issues of sign reversal of the Hall voltage and scaling between longitudinal (rho(xx)) and Hall (rho(xy)) resistivities are studied in Tl2Ba2Ca2Cu3O10 films in which the vortex dynamics is drastically changed by flux pinning at heavy-ion-irradiation-induced linear defects. While the sign anomaly diminishes with increasing defect concentration, the power law rho(xy) is approximately equal to rho(xx) exp beta, beta = 1.85 +/- 0.1, holds even after irradiation. This result shows that the scaling is a universal feature of the mixed state in this system. The sign anomaly, on the other hand, is not consistent with a model that invokes pinning-induced backflow in the vortex core as the mechanism for this effect.

  5. WHEN MODEL MEETS REALITY – A REVIEW OF SPAR LEVEL 2 MODEL AGAINST FUKUSHIMA ACCIDENT

    SciTech Connect

    Zhegang Ma

    2013-09-01

    The Standardized Plant Analysis Risk (SPAR) models are a set of probabilistic risk assessment (PRA) models used by the Nuclear Regulatory Commission (NRC) to evaluate the risk of operations at U.S. nuclear power plants and provide inputs to risk informed regulatory process. A small number of SPAR Level 2 models have been developed mostly for feasibility study purpose. They extend the Level 1 models to include containment systems, group plant damage states, and model containment phenomenology and accident progression in containment event trees. A severe earthquake and tsunami hit the eastern coast of Japan in March 2011 and caused significant damages on the reactors in Fukushima Daiichi site. Station blackout (SBO), core damage, containment damage, hydrogen explosion, and intensive radioactivity release, which have been previous analyzed and assumed as postulated accident progression in PRA models, now occurred with various degrees in the multi-units Fukushima Daiichi site. This paper reviews and compares a typical BWR SPAR Level 2 model with the “real” accident progressions and sequences occurred in Fukushima Daiichi Units 1, 2, and 3. It shows that the SPAR Level 2 model is a robust PRA model that could very reasonably describe the accident progression for a real and complicated nuclear accident in the world. On the other hand, the comparison shows that the SPAR model could be enhanced by incorporating some accident characteristics for better representation of severe accident progression.

  6. Patient-Reported Outcome Results From the Open-Label Phase III AURELIA Trial Evaluating Bevacizumab-Containing Therapy for Platinum-Resistant Ovarian Cancer

    PubMed Central

    Stockler, Martin R.; Hilpert, Felix; Friedlander, Michael; King, Madeleine T.; Wenzel, Lari; Lee, Chee Khoon; Joly, Florence; de Gregorio, Nikolaus; Arranz, José Angel; Mirza, Mansoor Raza; Sorio, Roberto; Freudensprung, Ulrich; Sneller, Vesna; Hales, Gill; Pujade-Lauraine, Eric

    2014-01-01

    Purpose To determine the effects of bevacizumab on patient-reported outcomes (PROs; secondary end point) in the AURELIA trial. Patients and Methods Patients with platinum-resistant ovarian cancer were randomly assigned to chemotherapy alone (CT) or with bevacizumab (BEV-CT). PROs were assessed using the European Organisation for Research and Treatment of Cancer Quality of Life Questionnaire–Ovarian Cancer Module 28 (EORTC QLQ-OV28) and Functional Assessment of Cancer Therapy–Ovarian Cancer symptom index (FOSI) at baseline and every two or three cycles (8/9 weeks) until disease progression. The primary PRO hypothesis was that more patients receiving BEV-CT than CT would achieve at least a 15% (≥ 15-point) absolute improvement on the QLQ-OV28 abdominal/GI symptom subscale (items 31-36) at week 8/9. Patients with missing week 8/9 questionnaires were included as unimproved. Questionnaires from all assessments until disease progression were analyzed using mixed-model repeated-measures (MMRM) analysis. Sensitivity analyses were used to determine the effects of differing assumptions and methods for missing data. Results Baseline questionnaires were available from 89% of 361 randomly assigned patients. More BEV-CT than CT patients achieved a ≥ 15% improvement in abdominal/GI symptoms at week 8/9 (primary PRO end point, 21.9% v 9.3%; difference, 12.7%; 95% CI, 4.4 to 20.9; P = .002). MMRM analysis covering all time points also favored BEV-CT (difference, 6.4 points; 95% CI, 1.3 to 11.6; P = .015). More BEV-CT than CT patients achieved ≥ 15% improvement in FOSI at week 8/9 (12.2% v 3.1%; difference, 9.0%; 95% CI, 2.9% to 15.2%; P = .003). Sensitivity analyses gave similar results and conclusions. Conclusion Bevacizumab increased the proportion of patients achieving a 15% improvement in patient-reported abdominal/GI symptoms during chemotherapy for platinum-resistant ovarian cancer. PMID:24687829

  7. Super Resolution Fluorescence Microscopy and Tracking of Bacterial Flotillin (Reggie) Paralogs Provide Evidence for Defined-Sized Protein Microdomains within the Bacterial Membrane but Absence of Clusters Containing Detergent-Resistant Proteins

    PubMed Central

    Dempwolff, Felix; Schmidt, Felix K.; Hervás, Ana B.; Stroh, Alex; Rösch, Thomas C.; Riese, Cornelius N.; Dersch, Simon; Heimerl, Thomas; Lucena, Daniella; Hülsbusch, Nikola; Stuermer, Claudia A. O.; Takeshita, Norio; Fischer, Reinhard; Graumann, Peter L.

    2016-01-01

    Biological membranes have been proposed to contain microdomains of a specific lipid composition, in which distinct groups of proteins are clustered. Flotillin-like proteins are conserved between pro—and eukaryotes, play an important function in several eukaryotic and bacterial cells, and define in vertebrates a type of so-called detergent-resistant microdomains. Using STED microscopy, we show that two bacterial flotillins, FloA and FloT, form defined assemblies with an average diameter of 85 to 110 nm in the model bacterium Bacillus subtilis. Interestingly, flotillin microdomains are of similar size in eukaryotic cells. The soluble domains of FloA form higher order oligomers of up to several hundred kDa in vitro, showing that like eukaryotic flotillins, bacterial assemblies are based in part on their ability to self-oligomerize. However, B. subtilis paralogs show significantly different diffusion rates, and consequently do not colocalize into a common microdomain. Dual colour time lapse experiments of flotillins together with other detergent-resistant proteins in bacteria show that proteins colocalize for no longer than a few hundred milliseconds, and do not move together. Our data reveal that the bacterial membrane contains defined-sized protein domains rather than functional microdomains dependent on flotillins. Based on their distinct dynamics, FloA and FloT confer spatially distinguishable activities, but do not serve as molecular scaffolds. PMID:27362352

  8. Luminescence in the fluoride-containing phosphate-based glasses: a possible origin of their high resistance to nanosecond pulse laser-induced damage.

    PubMed

    Wang, Pengfei; Lu, Min; Gao, Fei; Guo, Haitao; Xu, Yantao; Hou, Chaoqi; Zhou, Zhiwei; Peng, Bo

    2015-01-01

    Fusion power offers the prospect of an almost inexhaustible source of energy for future generations. It was reported that fusion fuel gains exceeding unity on the National Ignition Facility (NIF) were achieved, but so far great deal of scientific and engineering challenges have to be overcome for realizing fusion power generation. There is a bottleneck for color-separation gratings in NIF and other similar inertial confinement fusion (ICF) lasers. Here we show a series of high performance phosphate-based glasses that can transmit the third harmonic frequency (3ω) laser light with high efficiency meanwhile filter the fundamental (1ω) and the second harmonic frequency (2ω) laser lights through direct absorption, and especially they exhibit excellent damage threshold induced by nanosecond pulse laser compared with that of the fused silica used in NIF. Yellowish-orange fluorescence emits during the laser-material interaction process, and it can be tailored through regulating the glass structure. Study on its structural origin suggests that the fluorescence emission is a key factor that conduces to the high laser-induced damage resistance of these glasses. The results also indicated the feasibility of utilizing these high performance glasses in novel color separation optics, allowing novel design for the final optics assembly in ICF lasers. PMID:25716328

  9. The Computational Design of W and Co-Containing Creep-Resistant Steels with Barely Coarsening Laves Phase and M23C6 as the Strengthening Precipitates

    NASA Astrophysics Data System (ADS)

    Lu, Qi; Xu, Wei; van der Zwaag, Sybrand

    2014-09-01

    Generally, Laves phase and M23C6 are regarded as undesirable phases in creep-resistant steels due to their very high-coarsening rates and the resulting depletion of beneficial alloying elements from the matrix. In this study, a computational alloy design approach is presented to develop martensitic steels strengthened by Laves phase and/or M23C6, for which the coarsening rates are tailored such that they are at least one order of magnitude lower than those in existing alloys. Their volume fractions are optimized by tuning the chemical composition in parallel. The composition domain covering 10 alloying elements at realistic levels is searched by a genetic algorithm to explore the full potential of simultaneous maximization of the volume fraction and minimization of the precipitates coarsening rate. The calculations show that Co and W can drastically reduce the coarsening rate of Laves and M23C6 and yield high-volume fractions of precipitates. Mo on the other hand was shown to have a minimal effect on coarsening. The strengthening effects of Laves phase and M23C6 in the newly designed alloys are compared to existing counterparts, showing substantially higher precipitation-strengthening contributions especially after a long service time. New alloys were designed in which both Laves phase and M23C6 precipitates act as strengthening precipitates. Successfully combining MX and M23C6 was found to be impossible.

  10. Improvement in wear and corrosion resistance of AISI 1020 steel by high velocity oxy-fuel spray coating containing Ni-Cr-B-Si-Fe-C

    NASA Astrophysics Data System (ADS)

    Prince, M.; Thanu, A. Justin; Gopalakrishnan, P.

    2012-04-01

    In this investigation, AISI 1020 low carbon steel has been selected as the base material. The Ni based super alloy powder NiCrBSiFeC was sprayed on the base material using high velocity oxy-fuel spraying (HVOF) technique. The thickness of the coating was approximately 0.5 mm (500 μm). The coating was characterized using optical microscopy, Vickers microhardness testing, X-ray diffraction technique and scanning electron microscopy. Dry sliding wear tests were carried out at 3 m/s sliding speed under the load of 10 N for 1000 m sliding distance at various temperatures i.e., 35° C, 250° C and 350° C. The corrosion test was carried out in 1 M copper chloride in acetic acid solution. The polarization studies were also conducted for both base material and coating. The improvement in microhardness from 1.72 GPa (175 HV0.05) to 10.54 GPa (1075 HV0.05) was observed. The coatings exhibited 3-6 times improved wear resistance as compared with base material. Also, the corrosion rate was reduced by 3.5 times due to the presence of coatings.

  11. Luminescence in the fluoride-containing phosphate-based glasses: A possible origin of their high resistance to nanosecond pulse laser-induced damage

    NASA Astrophysics Data System (ADS)

    Wang, Pengfei; Lu, Min; Gao, Fei; Guo, Haitao; Xu, Yantao; Hou, Chaoqi; Zhou, Zhiwei; Peng, Bo

    2015-02-01

    Fusion power offers the prospect of an almost inexhaustible source of energy for future generations. It was reported that fusion fuel gains exceeding unity on the National Ignition Facility (NIF) were achieved, but so far great deal of scientific and engineering challenges have to be overcome for realizing fusion power generation. There is a bottleneck for color-separation gratings in NIF and other similar inertial confinement fusion (ICF) lasers. Here we show a series of high performance phosphate-based glasses that can transmit the third harmonic frequency (3ω) laser light with high efficiency meanwhile filter the fundamental (1ω) and the second harmonic frequency (2ω) laser lights through direct absorption, and especially they exhibit excellent damage threshold induced by nanosecond pulse laser compared with that of the fused silica used in NIF. Yellowish-orange fluorescence emits during the laser-material interaction process, and it can be tailored through regulating the glass structure. Study on its structural origin suggests that the fluorescence emission is a key factor that conduces to the high laser-induced damage resistance of these glasses. The results also indicated the feasibility of utilizing these high performance glasses in novel color separation optics, allowing novel design for the final optics assembly in ICF lasers.

  12. [Venomous animal accidents in childhood

    PubMed

    Oliveira, J S; Campos, J A; Costa, D M

    1999-11-01

    OBJECTIVE: To highlight the importance of venomous animal accidents in childhood. The conducts are based on the proposals of the Ministério da Saúde do Brasil [Ministry of Health of Brazil] to standardize medical care in this kind of accident. This article shows the importance of early clinical diagnosis and assistance.METHODS: Review of international and national literature that includes original articles, official standards and books.RESULTS: Pediatricians may always feel insecure when they have to attend children who had venomous animal accidents because this kind of pathology is not very common. This article tries to offer easy guidelines and describes the main steps to be followed. Besides, peculiar or unusual aspects of these accidents are to be found in the literature referred to in the end of this article. Venomous animal accidents are always more severe in children, therefore resulting in higher mortality and sequelae. We assert that the early antivenom sera is extremely helpful.CONCLUSIONS: The systematization of the assistance may guarantee that the essential steps are followed thus making the assistance itself more effective. This is the purpose of the guidelines presented in this article. PMID:14685472

  13. Accident Prevention in the Cowshed*

    PubMed Central

    Mainzer, W.

    1966-01-01

    Work accidents were studied at two agricultural settlements in the Haifa area. Most of the accidents were caused by farm animals, particularly by cattle, a fact which is in agreement with a general statistical survey conducted by the Department for Occupational Health of the General Federation of Labour in Israel. However, in the present investigation it was found that the accident rate in cowsheds was more than 10 times higher among the members of a co-operative smallholders' village (Moshav Ovdim) than it was at a collective settlement (Moshav Shetufi) of the same numerical size. Searching for the basic factors involved, it was discovered that the main reason for this striking difference in accident frequency was the faulty design of the small cowshed at the individual farms of the co-operative settlement, which, lacking adequate protective measures, exposes the farmer to close contact with the animals throughout almost all stages of dealing with them. It is concluded that accidents from handling cattle can be prevented by adhering strictly to the principle of eliminating direct contact between man and animals in the construction of the cowshed and its annexes. Images PMID:5948271

  14. Nuclear accident dosimetry intercomparison studies.

    PubMed

    Sims, C S

    1989-09-01

    Twenty-two nuclear accident dosimetry intercomparison studies utilizing the fast-pulse Health Physics Research Reactor at the Oak Ridge National Laboratory have been conducted since 1965. These studies have provided a total of 62 different organizations a forum for discussion of criticality accident dosimetry, an opportunity to test their neutron and gamma-ray dosimetry systems under a variety of simulated criticality accident conditions, and the experience of comparing results with reference dose values as well as with the measured results obtained by others making measurements under identical conditions. Sixty-nine nuclear accidents (27 with unmoderated neutron energy spectra and 42 with eight different shielded spectra) have been simulated in the studies. Neutron doses were in the 0.2-8.5 Gy range and gamma doses in the 0.1-2.0 Gy range. A total of 2,289 dose measurements (1,311 neutron, 978 gamma) were made during the intercomparisons. The primary methods of neutron dosimetry were activation foils, thermoluminescent dosimeters, and blood sodium activation. The main methods of gamma dose measurement were thermoluminescent dosimeters, radiophotoluminescent glass, and film. About 68% of the neutron measurements met the accuracy guidelines (+/- 25%) and about 52% of the gamma measurements met the accuracy criterion (+/- 20%) for accident dosimetry. PMID:2777549

  15. Naval Spent Nuclear Fuel disposal Container System Description Document

    SciTech Connect

    N. E. Pettit

    2001-07-13

    The Naval Spent Nuclear Fuel Disposal Container System supports the confinement and isolation of waste within the Engineered Barrier System of the Monitored Geologic Repository (MGR). Disposal containers/waste packages are loaded and sealed in the surface waste handling facilities, transferred underground through the access drifts using a rail mounted transporter, and emplaced in emplacement drifts. The Naval Spent Nuclear Fuel Disposal Container System provides long term confinement of the naval spent nuclear fuel (SNF) placed within the disposal containers, and withstands the loading, transfer, emplacement, and retrieval operations. The Naval Spent Nuclear Fuel Disposal Container System provides containment of waste for a designated period of time and limits radionuclide release thereafter. The waste package maintains the waste in a designated configuration, withstands maximum credible handling and rockfall loads, limits the waste form temperature after emplacement, resists corrosion in the expected handling and repository environments, and provides containment of waste in the event of an accident. Each naval SNF disposal container will hold a single naval SNF canister. There will be approximately 300 naval SNF canisters, composed of long and short canisters. The disposal container will include outer and inner cylinder walls and lids. An exterior label will provide a means by which to identify a disposal container and its contents. Different materials will be selected for the waste package inner and outer cylinders. The two metal cylinders, in combination with the Emplacement Drift System, drip shield, and the natural barrier will support the design philosophy of defense-in-depth. The use of materials with different properties prevents a single mode failure from breaching the waste package. The inner cylinder and inner cylinder lids will be constructed of stainless steel while the outer cylinder and outer cylinder lids will be made of high-nickel alloy.

  16. A highway accident involving unirradiated nuclear fuel in Springfield, Massachusetts, on December 16, 1991

    SciTech Connect

    Carlson, R.W.; Fischer, L.E.

    1992-06-01

    In the early morning of Dec. 16, 1991, a severe accident occurred when a passenger vehicle traveling in the wrong direction collided with a tractor trailer carrying 24 unirradiated nuclear fuel assemblies in 12 containers on Interstate I-91 in Springfield, Massachusetts. The purpose of this report is to document the mechanical circumstances of the severe accident, confirm the nature and quantity of the radioactive materials involved, and assess the physical environment to which the containers were exposed and the response of the containers and their contents. The report consists of five major sections. The first section describes the circumstances and conditions of the accident and the finding of facts. The second describes the containers, the unirradiated nuclear fuel assemblies, and the tie down arrangement used for the trailer. The third describes the damage sustained during the accident to the tractor, trailer, containers, and unirradiated nuclear fuel assemblies. The fourth evaluates the accident environment and its effects on the containers and their contents. The final section gives conclusions derived from the analysis and fact finding investigation. During this severe accident, only minor injuries occurred, and at no time was the public health and safety at risk.

  17. Development of a new pentaplex real-time PCR assay for the identification of poly-microbial specimens containing Staphylococcus aureus and other staphylococci, with simultaneous detection of staphylococcal virulence and methicillin resistance markers.

    PubMed

    Okolie, Charles E; Wooldridge, Karl G; Turner, David P; Cockayne, Alan; James, Richard

    2015-06-01

    Staphylococcus aureus strains harbouring genes encoding virulence and antibiotic resistance are of public health importance. In clinical samples, pathogenic S. aureus is often mixed with putatively less pathogenic coagulase-negative staphylococci (CoNS), both of which can harbour mecA, the gene encoding staphylococcal methicillin-resistance. There have been previous attempts at distinguishing MRSA from MRCoNS, most of which were based on the detection of one of the pathognomonic markers of S. aureus, such as coa, nuc or spa. That approach might suffice for discrete colonies and mono-microbial samples; it is inadequate for identification of clinical specimens containing mixtures of S. aureus and CoNS. In the present study, a real-time pentaplex PCR assay has been developed which simultaneously detects markers for bacteria (16S rRNA), coagulase-negative staphylococcus (cns), S. aureus (spa), Panton-Valentine leukocidin (pvl) and methicillin resistance (mecA). Staphylococcal and non-staphylococcal bacterial strains (n = 283) were used to validate the new assay. The applicability of this test to clinical samples was evaluated using spiked blood cultures (n = 43) containing S. aureus and CoNS in mono-microbial and poly-microbial models, which showed that the 5 markers were all detected as expected. Cycling completes within 1 h, delivering 100% specificity, NPV and PPV with a detection limit of 1.0 × 10(1) to 3.0 × 10(1) colony forming units (CFU)/ml, suggesting direct applicability in routine diagnostic microbiology. This is the most multiplexed real-time PCR-based PVL-MRSA assay and the first detection of a unique marker for CoNS without recourse to the conventional elimination approach. There was no evidence that this new assay produced invalid/indeterminate test results. PMID:25790897

  18. A comparative analysis of accident risks in fossil, hydro, and nuclear energy chains

    SciTech Connect

    Burgherr, P.; Hirschberg, S.

    2008-07-01

    This study presents a comparative assessment of severe accident risks in the energy sector, based on the historical experience of fossil (coal, oil, natural gas, and LPG (Liquefied Petroleum Gas)) and hydro chains contained in the comprehensive Energy-related Severe Accident Database (ENSAD), as well as Probabilistic Safety Assessment (PSA) for the nuclear chain. Full energy chains were considered because accidents can take place at every stage of the chain. Comparative analyses for the years 1969-2000 included a total of 1870 severe ({>=} 5 fatalities) accidents, amounting to 81,258 fatalities. Although 79.1% of all accidents and 88.9% of associated fatalities occurred in less developed, non-OECD countries, industrialized OECD countries dominated insured losses (78.0%), reflecting their substantially higher insurance density and stricter safety regulations. Aggregated indicators and frequency-consequence (F-N) curves showed that energy-related accident risks in non-OECD countries are distinctly higher than in OECD countries. Hydropower in non-OECD countries and upstream stages within fossil energy chains are most accident-prone. Expected fatality rates are lowest for Western hydropower and nuclear power plants; however, the maximum credible consequences can be very large. Total economic damages due to severe accidents are substantial, but small when compared with natural disasters. Similarly, external costs associated with severe accidents are generally much smaller than monetized damages caused by air pollution.

  19. Radiological Impact Assessment (RIA) following a postulated accident in PHWRS

    SciTech Connect

    Soni, N.; Kansal, M.; Rammohan, H. P.; Malhotra, P. K.

    2012-07-01

    Radiological Impact Assessment (RIA) following postulated accident i.e Loss of Coolant Accident (LOCA) with failed Emergency Core Cooling System (ECCS), performed as part of the reactor safety analysis of a typical 700 MWe Indian Pressurized Heavy Water Reactor(PHWR). The rationale behind the assessment is that the public needs to be protected in the event that the postulated accident results in radionuclide release outside containment. Radionuclides deliver dose to the human body through various pathways namely, plume submersion, exposure due to ground deposition, inhalation and ingestion. The total exposure dose measured in terms of total effective dose equivalent (TEDE) is the sum of doses to a hypothetical adult human at exclusion zone boundary by all the exposure pathways. The analysis provides the important inputs to decide upon the type of emergency counter measures to be adopted during the postulated accident. The importance of the various pathways in terms of contribution to the total effective dose equivalent(TEDE) is also assessed with respect to time of exposure. Inhalation and plume gamma dose are the major contributors towards TEDE during initial period of accident whereas ingestion and ground shine dose start dominating in TEDE in the extended period of exposure. Moreover, TEDE is initially dominated by I-131, Kr-88, Te-132, I-133 and Sr-89, whereas, as time progresses, Xe-133,I-131 and Te-132 become the main contributors. (authors)

  20. Source terms released into the environment for a station blackout severe accident at the Peach Bottom Atomic Power Station

    SciTech Connect

    Carbajo, J.J.

    1995-07-01

    This study calculates source terms released into the environment at the Peach Bottom Atomic Power Station after containment failure during a postulated low-pressure, short-term station blackout severe accident. The severe accident analysis code MELCOR, version 1.8.1, was used in these calculations. Source terms were calculated for three different containment failure modes. The largest environmental releases occur for early containment failure at the drywell liner in contact with the cavity by liner melt-through. This containment failure mode is very likely to occur when the cavity is dry during this postulated severe accident sequence.

  1. Vanilloid receptors mediate adrenergic nerve- and CGRP-containing nerve-dependent vasodilation induced by nicotine in rat mesenteric resistance arteries

    PubMed Central

    Eguchi, Shinji; Tezuka, Satoko; Hobara, Narumi; Akiyama, Shinji; Kurosaki, Yuji; Kawasaki, Hiromu

    2004-01-01

    Previous studies showed that nicotine induces adrenergic nerve-dependent vasodilation that is mediated by endogenous calcitonin gene-related peptide (CGRP) released from CGRP-containing (CGRPergic) nerves. The mechanisms underlying the nicotine-induced vasodilation were further studied. Rat mesenteric vascular beds without endothelium were contracted by perfusion with Krebs solution containing methoxamine, and the perfusion pressure was measured with a pressure transducer. Perfusion of nicotine (1–100 μM) for 1 min caused concentration-dependent vasodilation. Capsazepine (vanilloid receptor-1 antagonist; 1–10 μM) and ruthenium red (inhibitor of vanilloid response; 1–30 μM) concentration-dependently inhibited the nicotine-induced vasodilation without affecting the vasodilator response to exogenous CGRP. Nicotine-induced vasodilation was not inhibited by treatment with 3,4-dihydroxyphenylalanine (DOPA) receptor antagonist (L-DOPA cyclohexyl ester; 0.001–10 μM), dopamine D1 receptor-selective antagonist (SCH23390; 1–10 μM), dopamine D2 receptor antagonist (haloperidol; 0.1–0.5 μM), ATP P2x receptor-desensitizing agonist (α,β-methylene ATP; 1–10 μM), adenosine A2 receptor antagonist (8(p-sulfophenyl)theophylline; 10–50 μM) or neuropeptide Y (NPY)-Y1 receptor antagonist (BIBP3226; 0.1–0.5 μM). Immunohistochemical staining of the mesenteric artery showed dense innervation of CGRP- and vanilloid receptor-1-positive nerves, with both immunostainings appearing in the same neuron. The mesenteric artery was also densely innervated by NPY-positive nerves. Double immunostainings showed that both NPY and CGRP immunoreactivities appeared in the same neuron of the artery. These results suggest that nicotine acts on presynaptic nicotinic receptors to release adrenergic neurotransmitter(s) or related substance(s), which then stimulate vanilloid receptor-1 on CGRPergic nerves, resulting in CGRP release and vasodilation. PMID:15249421

  2. Testing of the CONTAIN code

    SciTech Connect

    Sciacca, F.W.; Bergeron, K.D.; Murata, K.K.; Rexroth, P.E.

    1984-04-01

    CONTAIN is a large computer code intended for use in the analysis of severe nuclear power plant accidents. Many tests have been conducted on CONTAIN to assess its adequacy for dealing with nuclear-accident problems. This report describes the CONTAIN test program and summarizes the results obtained to date. These results are presented so that users may be aware of the features of CONTAIN that have been checked and of the areas where problems have been identified. In addition, this report provides information needed by users to repeat tests of interest in their specific work areas. The test efforts have identified a substantial number of problems in the coding or logic of the CONTAIN code. Most of these problems have been corrected. These corrections have been included in the most recent versions of the code. CONTAIN can accurately treat most of the phenomena expected to occur in containment atmospheres. Some problems identified by the test program, involving pool-related phenomena, have prompted the development of a substantially new system of models for pool phenomena. When completed, this new system will be subjected to intense testing of the type described here.

  3. [Diving accidents. Emergency treatment of serious diving accidents].

    PubMed

    Schröder, S; Lier, H; Wiese, S

    2004-11-01

    Decompression injuries are potentially life-threatening incidents mainly due to a rapid decline in ambient pressure. Decompression illness (DCI) results from the presence of gas bubbles in the blood and tissue. DCI may be classified as decompression sickness (DCS) generated from the liberation of gas bubbles following an oversaturation of tissues with inert gas and arterial gas embolism (AGE) mainly due to pulmonary barotrauma. People working under hyperbaric pressure, e.g. in a caisson for general construction under water, and scuba divers are exposed to certain risks. Diving accidents can be fatal and are often characterized by organ dysfunction, especially neurological deficits. They have become comparatively rare among professional divers and workers. However, since recreational scuba diving is gaining more and more popularity there is an increasing likelihood of severe diving accidents. Thus, emergency staff working close to areas with a high scuba diving activity, e.g. lakes or rivers, may be called more frequently to a scuba diving accident. The correct and professional emergency treatment on site, especially the immediate and continuous administration of normobaric oxygen, is decisive for the outcome of the accident victim. The definitive treatment includes rapid recompression with hyperbaric oxygen. The value of adjunctive medication, however, remains controversial. PMID:15565421

  4. [Emergency treatment in decompression accidents in shipyards].

    PubMed

    Comet, M

    1989-08-01

    The Comex company has underwater workplaces scattered over the whole world, which are therefore very often far away from a medical center equipped for the treatment of decompression sickness. However, the subsequent evolution of such an event depends mainly on how fast the first aid is given to the patient. Therefore, the scientific and medical departments of our company developed a medical handbook to be used by chiefs of working platforms. The text which has to be easily understandable, mentions: a cursory description of the clinical signs of the different decompression accidents the measures which have to be taken in each case, depending on: the moment of the emergency: after or during decompression, the presence of an insufficient decompression, or a "blow-up". The handbook contains several recompression tables, first aid treatment recommendations and drugs. It has to be stressed that these procedures are only emergency steps. They should be performed before the patient can be transferred to a medical center with expertise in the treatment of decompression accidents. PMID:2799360

  5. Lantibiotic resistance.

    PubMed

    Draper, Lorraine A; Cotter, Paul D; Hill, Colin; Ross, R Paul

    2015-06-01

    The dramatic rise in the incidence of antibiotic resistance demands that new therapeutic options will have to be developed. One potentially interesting class of antimicrobials are the modified bacteriocins termed lantibiotics, which are bacterially produced, posttranslationally modified, lanthionine/methyllanthionine-containing peptides. It is interesting that low levels of resistance have been reported for lantibiotics compared with commercial antibiotics. Given that there are very few examples of naturally occurring lantibiotic resistance, attempts have been made to deliberately induce resistance phenotypes in order to investigate this phenomenon. Mechanisms that hinder the action of lantibiotics are often innate systems that react to the presence of any cationic peptides/proteins or ones which result from cell well damage, rather than being lantibiotic specific. Such resistance mechanisms often arise due to altered gene regulation following detection of antimicrobials/cell wall damage by sensory proteins at the membrane. This facilitates alterations to the cell wall or changes in the composition of the membrane. Other general forms of resistance include the formation of spores or biofilms, which are a common mechanistic response to many classes of antimicrobials. In rare cases, bacteria have been shown to possess specific antilantibiotic mechanisms. These are often species specific and include the nisin lytic protein nisinase and the phenomenon of immune mimicry. PMID:25787977

  6. Lantibiotic Resistance

    PubMed Central

    Draper, Lorraine A.; Ross, R. Paul

    2015-01-01

    SUMMARY The dramatic rise in the incidence of antibiotic resistance demands that new therapeutic options will have to be developed. One potentially interesting class of antimicrobials are the modified bacteriocins termed lantibiotics, which are bacterially produced, posttranslationally modified, lanthionine/methyllanthionine-containing peptides. It is interesting that low levels of resistance have been reported for lantibiotics compared with commercial antibiotics. Given that there are very few examples of naturally occurring lantibiotic resistance, attempts have been made to deliberately induce resistance phenotypes in order to investigate this phenomenon. Mechanisms that hinder the action of lantibiotics are often innate systems that react to the presence of any cationic peptides/proteins or ones which result from cell well damage, rather than being lantibiotic specific. Such resistance mechanisms often arise due to altered gene regulation following detection of antimicrobials/cell wall damage by sensory proteins at the membrane. This facilitates alterations to the cell wall or changes in the composition of the membrane. Other general forms of resistance include the formation of spores or biofilms, which are a common mechanistic response to many classes of antimicrobials. In rare cases, bacteria have been shown to possess specific antilantibiotic mechanisms. These are often species specific and include the nisin lytic protein nisinase and the phenomenon of immune mimicry. PMID:25787977

  7. 49 CFR 229.17 - Accident reports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... CFR part 225. ... 49 Transportation 4 2011-10-01 2011-10-01 false Accident reports. 229.17 Section 229.17..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS General § 229.17 Accident reports. (a)...

  8. 49 CFR 229.17 - Accident reports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... CFR part 225. ... 49 Transportation 4 2010-10-01 2010-10-01 false Accident reports. 229.17 Section 229.17..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS General § 229.17 Accident reports. (a)...

  9. Material Selection for Accident Tolerant Fuel Cladding

    SciTech Connect

    Pint, Bruce A.; Terrani, Kurt A.; Yamamoto, Yukinori; Snead, Lance Lewis

    2015-01-01

    Alternative cladding materials to Zr-based alloys are being investigated for accident tolerance, which can be defined as > 100X improvement (compared to Zr-based alloys) in oxidation resistance to steam or steam-H2 environments at ≥ 1200°C for short times. After reviewing a wide range of candidates, current steam oxidation testing is being conducted on Mo, MAX phases and FeCrAl alloys. Recently reported low mass losses for Mo in steam at 800°C could not be reproduced. Both FeCrAl and MAX phase Ti2AlC form a protective alumina scale in steam. However, commercial Ti2AlC that was not single phase, formed a much thicker oxide at 1200°C in steam and significant TiO2, and therefore Ti2AlC may be challenging to form as a cladding or a coating. Alloy development for FeCrAl is seeking to maintain its steam oxidation resistance to 1475°C, while reducing its Cr content to minimize susceptibility to irradiation-assisted α´ formation. The composition effects and critical limits to retaining protective scale formation at > 1400°C are still being evaluated.

  10. Material selection for accident tolerant fuel cladding

    SciTech Connect

    Pint, B. A.; Terrani, K. A.; Yamamoto, Y.; Snead, L. L.

    2015-09-14

    Alternative cladding materials are being investigated for accident tolerance, which can be defined as >100X improvement (compared to current Zr-based alloys) in oxidation resistance in steam environments at ≥1200°C for short (≤4 h) times. After reviewing a wide range of candidates, current steam oxidation testing is being conducted on Mo, MAX phases and FeCrAl alloys. Recently reported low mass losses for Mo in steam at 800°C could not be reproduced. Both FeCrAl and MAX phase Ti2AlC form a protective alumina scale in steam. Therefore, commercial Ti2AlC that is not single phase, formed a much thicker oxide at 1200°C in steam and significant TiO2, and therefore may be challenging to use as a cladding or a coating. Alloy development for FeCrAl is seeking to maintain its steam oxidation resistance to 1475°C, while reducing its Cr content to minimize susceptibility to irradiation assisted Cr-rich α’ formation. The composition effects and critical limits to retaining protective scale formation at >1400°C are still being evaluated.

  11. Material selection for accident tolerant fuel cladding

    DOE PAGESBeta

    Pint, B. A.; Terrani, K. A.; Yamamoto, Y.; Snead, L. L.

    2015-09-14

    Alternative cladding materials are being investigated for accident tolerance, which can be defined as >100X improvement (compared to current Zr-based alloys) in oxidation resistance in steam environments at ≥1200°C for short (≤4 h) times. After reviewing a wide range of candidates, current steam oxidation testing is being conducted on Mo, MAX phases and FeCrAl alloys. Recently reported low mass losses for Mo in steam at 800°C could not be reproduced. Both FeCrAl and MAX phase Ti2AlC form a protective alumina scale in steam. Therefore, commercial Ti2AlC that is not single phase, formed a much thicker oxide at 1200°C in steammore » and significant TiO2, and therefore may be challenging to use as a cladding or a coating. Alloy development for FeCrAl is seeking to maintain its steam oxidation resistance to 1475°C, while reducing its Cr content to minimize susceptibility to irradiation assisted Cr-rich α’ formation. The composition effects and critical limits to retaining protective scale formation at >1400°C are still being evaluated.« less

  12. Material Selection for Accident Tolerant Fuel Cladding

    NASA Astrophysics Data System (ADS)

    Pint, B. A.; Terrani, K. A.; Yamamoto, Y.; Snead, L. L.

    2015-09-01

    Alternative cladding materials to Zr-based alloys are being investigated for accident tolerance, which can be defined as >100X improvement (compared to Zr-based alloys) in oxidation resistance to steam or steam-H2 environments at ≥1473 K (1200 °C) for short times. After reviewing a wide range of candidates, current steam oxidation testing is being conducted on Mo, MAX phases, and FeCrAl alloys. Recently reported low-mass losses for Mo in steam at 1073 K (800 °C) could not be reproduced. Both FeCrAl and MAX phase Ti2AlC form a protective alumina scale in steam. However, commercial Ti2AlC that was not single phase, formed a much thicker oxide at 1473 K (1200 °C) in steam and significant TiO2, and therefore, Ti2AlC may be challenging to form as a cladding or a coating. Alloy development for FeCrAl is seeking to maintain its steam oxidation resistance to 1748 K (1475 °C), while reducing its Cr content to minimize susceptibility to irradiation-assisted α' formation. The composition effects and critical limits to retaining protective scale formation at >1673 K (1400 °C) are still being evaluated.

  13. The Physics of Traffic Accidents

    ERIC Educational Resources Information Center

    Knight, Peter

    1975-01-01

    Shows how physics can be used to analyze and prevent traffic accidents by determining critical speeds on curves, the behavior of motor cycles and stability of articulated vehicles, and the visibility that is needed to make a minor road junction safe. (MLH)

  14. Delta launch vehicle accident investigation

    NASA Astrophysics Data System (ADS)

    1986-03-01

    The text of the testimony given by several witnesses during the House hearings on the Delta launch vehicle accident of May 3, 1986 is given. Pre-launch procedures, failure analysis, the possibility of sabotage, and design and testing are among the topics discussed.

  15. Updating outdated predictive accident models.

    PubMed

    Wood, A G; Mountain, L J; Connors, R D; Maher, M J; Ropkins, K

    2013-06-01

    Reliable predictive accident models (PAMs) (also referred to as safety performance functions (SPFs)) are essential to design and maintain safe road networks however, ongoing changes in road and vehicle design coupled with road safety initiatives, mean that these models can quickly become dated. Unfortunately, because the fitting of sophisticated PAMs including a wide range of explanatory variables is not a trivial task, available models tend to be based on data collected many years ago and seem unlikely to give reliable estimates of current accidents. Large, expensive studies to produce new models are likely to be, at best, only a temporary solution. This paper thus seeks to develop a practical and efficient methodology to allow currently available PAMs to be updated to give unbiased estimates of accident frequencies at any point in time. Two principal issues are examined: the extent to which the temporal transferability of predictive accident models varies with model complexity; and the practicality and efficiency of two alternative updating strategies. The models used to illustrate these issues are the suites of models developed for rural dual and single carriageway roads in the UK. These are widely used in several software packages in spite of being based on data collected during the 1980s and early 1990s. It was found that increased model complexity by no means ensures better temporal transferability and that calibration of the models using a scale factor can be a practical alternative to fitting new models. PMID:23510788

  16. Time Slows Down during Accidents

    PubMed Central

    Arstila, Valtteri

    2012-01-01

    The experienced speed of the passage of time is not constant as time can seem to fly or slow down depending on the circumstances we are in. Anecdotally accidents and other frightening events are extreme examples of the latter; people who have survived accidents often report altered phenomenology including how everything appeared to happen in slow motion. While the experienced phenomenology has been investigated, there are no explanations about how one can have these experiences. Instead, the only recently discussed explanation suggests that the anecdotal phenomenology is due to memory effects and hence not really experienced during the accidents. The purpose of this article is (i) to reintroduce the currently forgotten comprehensively altered phenomenology that some people experience during the accidents, (ii) to explain why the recent experiments fail to address the issue at hand, and (iii) to suggest a new framework to explain what happens when people report having experiences of time slowing down in these cases. According to the suggested framework, our cognitive processes become rapidly enhanced. As a result, the relation between the temporal properties of events in the external world and in internal states becomes distorted with the consequence of external world appearing to slow down. That is, the presented solution is a realist one in a sense that it maintains that sometimes people really do have experiences of time slowing down. PMID:22754544

  17. Time Slows Down during Accidents.

    PubMed

    Arstila, Valtteri

    2012-01-01

    The experienced speed of the passage of time is not constant as time can seem to fly or slow down depending on the circumstances we are in. Anecdotally accidents and other frightening events are extreme examples of the latter; people who have survived accidents often report altered phenomenology including how everything appeared to happen in slow motion. While the experienced phenomenology has been investigated, there are no explanations about how one can have these experiences. Instead, the only recently discussed explanation suggests that the anecdotal phenomenology is due to memory effects and hence not really experienced during the accidents. The purpose of this article is (i) to reintroduce the currently forgotten comprehensively altered phenomenology that some people experience during the accidents, (ii) to explain why the recent experiments fail to address the issue at hand, and (iii) to suggest a new framework to explain what happens when people report having experiences of time slowing down in these cases. According to the suggested framework, our cognitive processes become rapidly enhanced. As a result, the relation between the temporal properties of events in the external world and in internal states becomes distorted with the consequence of external world appearing to slow down. That is, the presented solution is a realist one in a sense that it maintains that sometimes people really do have experiences of time slowing down. PMID:22754544

  18. Determinants of injuries in passenger vessel accidents.

    PubMed

    Yip, Tsz Leung; Jin, Di; Talley, Wayne K

    2015-09-01

    This paper investigates determinants of crew and passenger injuries in passenger vessel accidents. Crew and passenger injury equations are estimated for ferry, ocean cruise, and river cruise vessel accidents, utilizing detailed data of individual vessel accidents that were investigated by the U.S. Coast Guard during the time period 2001-2008. The estimation results provide empirical evidence (for the first time in the literature) that crew injuries are determinants of passenger injuries in passenger vessel accidents. PMID:26070017

  19. Advanced Construction of Compact Containment BWR

    SciTech Connect

    Takahashi, M.; Maruyama, T.; Mori, H.; Hoshino, K.; Hijioka, Y.; Heki, H.; Nakamaru, M.; Hoshi, T.

    2006-07-01

    The reactor concept considered in this paper has a mid/small power output, a compact containment and a simplified BWR configuration with comprehensive safety features. Compact Containment BWR (CCR) is being developed with matured BWR technologies together with innovative systems/components, will provide attractiveness for the energy market in the world due to its flexibility in energy demands as well as in site conditions, its high potential in reducing investment risk and its safety feature facilitating public acceptance. The flexibility is achieved by CCR's mid/small power output of 400 MWe class and capability of long operating cycle (refueling intervals). The high investment potential is expected from CCR's simplification/innovation in design such as natural circulation core cooling with the bottom located short core, top mounted upper entry control rod drives (CRDs) with ring-type dryers and simplified safety system with high pressure resistible primary containment vessel (PCV) concept. The natural circulation core eliminates recirculation pumps as well as needs for maintenance of such pumps. The top mounted upper entry CRDs enable the bottom located short core in RPV. The safety feature mainly consists of large water inventory above the core without large penetration below the top of the core, passive cooling system by isolation condenser (IC), high pressure resistible PCV and in-vessel retention (IVR) capability. The large inventory increases the system response time in case of design base accidents including loss of coolant accidents. The IC suppresses PCV pressure by steam condensation without any AC power. Cooling the molten core inside the RPV if the core should be damaged by loss of core coolability could attain the IVR. CCR's specific self-standing steel high pressure resistible PCV is designed to contain minimum piping and valves inside with reactor pressure vessel (RPV), only 13 m in diameter and 24 m in height. This compact PCV makes it possible to

  20. School Bus Accidents and Driver Age.

    ERIC Educational Resources Information Center

    McMichael, Judith

    The study examines the rates and types of school bus accidents according to the age of the school bus driver. Accident rates in North Carolina for the school year 1971-72 were analyzed using three sources of data: accident reports, driver and mileage data, and questionnaires administered to a sample of school bus drivers. Data were obtained on…

  1. 48 CFR 836.513 - Accident prevention.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Accident prevention. 836... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 836.513 Accident prevention. The contracting officer must insert the clause at 852.236-87, Accident Prevention,...

  2. 49 CFR 195.50 - Reporting accidents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Reporting accidents. 195.50 Section 195.50 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An...

  3. 48 CFR 1836.513 - Accident prevention.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Accident prevention. 1836... 1836.513 Accident prevention. The contracting officer must insert the clause at 1852.223-70, Safety and Health, in lieu of FAR clause 52.236-13, Accident Prevention, and its Alternate I....

  4. 48 CFR 36.513 - Accident prevention.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Accident prevention. 36... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.513 Accident prevention. (a) The contracting officer shall insert the clause at 52.236-13, Accident Prevention,...

  5. 48 CFR 636.513 - Accident prevention.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Accident prevention. 636... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 636.513 Accident prevention. (a) In... contracting activities shall insert DOSAR 652.236-70, Accident Prevention, in lieu of FAR clause...

  6. 22 CFR 102.8 - Reporting accidents.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Foreign Relations DEPARTMENT OF STATE ECONOMIC AND OTHER FUNCTIONS CIVIL AVIATION United States Aircraft Accidents Abroad § 102.8 Reporting accidents. (a) To airline and Civil Aeronautics Administration... accident to the Foreign Service post, to the nearest Civil Aeronautics Administration office, and to...

  7. 22 CFR 102.8 - Reporting accidents.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Foreign Relations DEPARTMENT OF STATE ECONOMIC AND OTHER FUNCTIONS CIVIL AVIATION United States Aircraft Accidents Abroad § 102.8 Reporting accidents. (a) To airline and Civil Aeronautics Administration... accident to the Foreign Service post, to the nearest Civil Aeronautics Administration office, and to...

  8. 22 CFR 102.8 - Reporting accidents.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Reporting accidents. 102.8 Section 102.8... Accidents Abroad § 102.8 Reporting accidents. (a) To airline and Civil Aeronautics Administration... and the supervisory Foreign Service office whenever considered appropriate. A final report, after...

  9. 28 CFR 301.106 - Repetitious accidents.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Repetitious accidents. 301.106 Section 301.106 Judicial Administration FEDERAL PRISON INDUSTRIES, INC., DEPARTMENT OF JUSTICE INMATE ACCIDENT COMPENSATION General § 301.106 Repetitious accidents. If an inmate worker is involved in successive...

  10. 48 CFR 1836.513 - Accident prevention.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Accident prevention. 1836... 1836.513 Accident prevention. The contracting officer must insert the clause at 1852.223-70, Safety and Health, in lieu of FAR clause 52.236-13, Accident Prevention, and its Alternate I....

  11. NASA Medical Response to Human Spacecraft Accidents

    NASA Technical Reports Server (NTRS)

    Patlach, Robert

    2010-01-01

    Manned space flight is risky business. Accidents have occurred and may occur in the future. NASA's manned space flight programs, with all their successes, have had three fatal accidents, one at the launch pad and two in flight. The Apollo fire and the Challenger and Columbia accidents resulted in a loss of seventeen crewmembers. Russia's manned space flight programs have had three fatal accidents, one ground-based and two in flight. These accidents resulted in the loss of five crewmembers. Additionally, manned spacecraft have encountered numerous close calls with potential for disaster. The NASA Johnson Space Center Flight Safety Office has documented more than 70 spacecraft incidents, many of which could have become serious accidents. At the Johnson Space Center (JSC), medical contingency personnel are assigned to a Mishap Investigation Team. The team deploys to the accident site to gather and preserve evidence for the Accident Investigation Board. The JSC Medical Operations Branch has developed a flight surgeon accident response training class to capture the lessons learned from the Columbia accident. This presentation will address the NASA Mishap Investigation Team's medical objectives, planned response, and potential issues that could arise subsequent to a manned spacecraft accident. Educational Objectives are to understand the medical objectives and issues confronting the Mishap Investigation Team medical personnel subsequent to a human space flight accident.

  12. 49 CFR 195.50 - Reporting accidents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Reporting accidents. 195.50 Section 195.50 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An...

  13. 28 CFR 301.106 - Repetitious accidents.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Repetitious accidents. 301.106 Section 301.106 Judicial Administration FEDERAL PRISON INDUSTRIES, INC., DEPARTMENT OF JUSTICE INMATE ACCIDENT COMPENSATION General § 301.106 Repetitious accidents. If an inmate worker is involved in successive...

  14. Columbia Accident Investigation Board Report. Volume Three

    NASA Technical Reports Server (NTRS)

    Kirchhoff, C. M.; Reingold, L. A.; Reid, J. A.; Goodman, P. A.; White, D. J.

    2003-01-01

    The Columbia Accident Investigation Board's (CAIB) independent investigation into the February 1, 2003 destruction of the Space Shuttle Columbia produced a six volume report. This is Volume III of the report. Volume III contains other technical documents produced by NASA and other organizations, which were provided to the CAIB in support of its inquiry into the tragedy. Technical documents included in the report are: Appendix E.1 CoFR Endorsements; Appendix E.2 STS-107 Image Analysis Team Final Report; Appendix E.3 An Assessment of Potential Material Candidates for the 'Flight Day 2', Radar Object Observed during the NASA Mission STS-107; Appendix E.4 Columbia Early Sighting Assessment Team Final Report.

  15. A review of accidents, prevention and mitigation options related to hazardous gases

    SciTech Connect

    Fthenakis, V.M.

    1993-05-01

    Statistics on industrial accidents are incomplete due to lack of specific criteria on what constitutes a release or accident. In this country, most major industrial accidents were related to explosions and fires of flammable materials, not to releases of chemicals into the environment. The EPA in a study of 6,928 accidental releases of toxic chemicals revealed that accidents at stationary facilities accounted for 75% of the total number of releases, and transportation accidents for the other 25%. About 7% of all reported accidents (468 cases) resulted in 138 deaths and 4,717 injuries ranging from temporary respiratory problems to critical injuries. In-plant accidents accounted for 65% of the casualties. The most efficient strategy to reduce hazards is to choose technologies which do not require the use of large quantities of hazardous gases. For new technologies this approach can be implemented early in development, before large financial resources and efforts are committed to specific options. Once specific materials and options have been selected, strategies to prevent accident initiating events need to be evaluated and implemented. The next step is to implement safety options which suppress a hazard when an accident initiating event occurs. Releases can be prevented or reduced with fail-safe equipment and valves, adequate warning systems and controls to reduce and interrupt gas leakage. If an accident occurs and safety systems fail to contain a hazardous gas release, then engineering control systems will be relied on to reduce/minimize environmental releases. As a final defensive barrier, the prevention of human exposure is needed if a hazardous gas is released, in spite of previous strategies. Prevention of consequences forms the final defensive barrier. Medical facilities close by that can accommodate victims of the worst accident can reduce the consequences of personnel exposure to hazardous gases.

  16. A high-molecular-weight fraction of smooth lipopolysaccharide in Klebsiella serotype O1:K20 contains a unique O-antigen epitope and determines resistance to nonspecific serum killing.

    PubMed Central

    McCallum, K L; Schoenhals, G; Laakso, D; Clarke, B; Whitfield, C

    1989-01-01

    The lipopolysaccharide (LPS) O-antigen side chains of Klebsiella serotype O1 have been studied by using mutants selected by resistance to a Klebsiella bacteriophage designated O1-A. Two classes of LPS mutants were identified. The major group (90%) synthesized rough LPS. The remaining 10% of the mutants produced a novel LPS profile that lacked the highest-molecular-weight O-substituted molecules (HMW-LPS) but still produced lower-molecular-weight O-substituted species (LMW-LPS). By using antisera raised against mutant Klebsiella strains and antiserum specific for Pasteurella haemolytica serotype 4, it was demonstrated that HMW-LPS and LMW-LPS contain shared epitopes. HMW-LPS also contained an epitope absent in LMW-LPS. This unique epitope was recognized by a monoclonal antibody (O1-52.6) and appears to be responsible for the serological cross-reaction between the O antigens of Klebsiella O1 and Escherichia coli O19. This HMW-LPS epitope was present in eight other Klebsiella O1 isolates which were examined. Electron microscopy demonstrated that HMW-LPS excluded overlying capsular polysaccharide for a distance of 25 to 40 nm. The distance was reduced to 10 to 18 nm in strains which synthesized only LMW-LPS and to zero in rough LPS strains. The HMW-LPS of Klebsiella O1 was shown to be an important virulence determinant, since this molecule was responsible for the resistance of the bacterium to nonspecific, complement-mediated serum killing. Images PMID:2478478

  17. The Chernobyl accident ten years later

    SciTech Connect

    Squires, D.J.

    1996-12-31

    On April 26, 1986 at 1:23 AM a fire and explosion occurred at the fourth unit of the Chernobyl Nuclear Power Plant Complex, located in the Ukraine, that resulted in the destruction of the reactor core and most of the building in which it was housed. Several environmental impacts resulting from the accident will be discussed in this paper, which will include the effects on plant and wild life, radioactive waste generated and stored or disposed of, effects of evacuations relating to residents within the subsequently established 10km and 30km control zones, impacts of the emergency containment structure (sarcophagus), and potential effects on world opinion and future development of nuclear power. As an immediate result of the fire, 31 people died (2 from the fire & smoke, and 29 from excessive radiation); 237 cases of acute radiation sickness occurred; the total fatalities based upon induced chronic diseases as a result of the accident is unknown: more than 100,000 people were evacuated from within the subsequently established 30 km control zone; in excess of 50 million curies of radionuclides that included finely dispersed nuclear fuel, fragments of graphite, concrete and other building materials were released from the reactor into the environment; an estimated one million cubic meters of radioactive waste were generated (LLW, ILW, HLW); more than 5000 tons of materials (sand, boron, dolomite, cement, and lead) were used to put the fire out by helicopter; shutdown of the adjacent power plants were performed; and other environmental impacts occurred. The Chernobyl Nuclear Power Plant Unit No 4 is an RBMK-1000. It initiated operations in 1983, it was a 1000 MWe with a power output of 3200 MW(th), the reactor core contained 190 MT of fuel, with 1659 assemblies (plus 211 control rods), the average burnup rate was 10.3 MWd/kg, and the reactor operated on a continuous basis with maintenance and fuel reload performed during operations.

  18. Direct containment heating models in the CONTAIN code

    SciTech Connect

    Washington, K.E.; Williams, D.C.

    1995-08-01

    The potential exists in a nuclear reactor core melt severe accident for molten core debris to be dispersed under high pressure into the containment building. If this occurs, the set of phenomena that result in the transfer of energy to the containment atmosphere and its surroundings is referred to as direct containment heating (DCH). Because of the potential for DCH to lead to early containment failure, the U.S. Nuclear Regulatory Commission (USNRC) has sponsored an extensive research program consisting of experimental, analytical, and risk integration components. An important element of the analytical research has been the development and assessment of direct containment heating models in the CONTAIN code. This report documents the DCH models in the CONTAIN code. DCH models in CONTAIN for representing debris transport, trapping, chemical reactions, and heat transfer from debris to the containment atmosphere and surroundings are described. The descriptions include the governing equations and input instructions in CONTAIN unique to performing DCH calculations. Modifications made to the combustion models in CONTAIN for representing the combustion of DCH-produced and pre-existing hydrogen under DCH conditions are also described. Input table options for representing the discharge of debris from the RPV and the entrainment phase of the DCH process are also described. A sample calculation is presented to demonstrate the functionality of the models. The results show that reasonable behavior is obtained when the models are used to predict the sixth Zion geometry integral effects test at 1/10th scale.

  19. Safety in Academic Chemistry Laboratories: Volume 1. Accident Prevention for College and University Students, 7th Edition.

    ERIC Educational Resources Information Center

    American Chemical Society, Washington, DC.

    This book contains volume 1 of 2 and describes safety guidelines for academic chemistry laboratories to prevent accidents for college and university students. Contents include: (1) "Your Responsibility for Accident Prevention"; (2) "Guide to Chemical Hazards"; (3) "Recommended Laboratory Techniques"; and (4) "Safety Equipment and Emergency…

  20. [Case report: fatal diving-accident. Or: accident while diving?].

    PubMed

    Böttcher, F; Jüttner, B; Krause, A; Rocha, M; Koppert, W

    2012-02-01

    This example of a fatal diving accident shows how challenging such cases can be in pre-hospital and clinical care. There is no common mechanism in diving fatalities and more than one group of disorders coming along with decompression sickness. Diving medicine is not an element of medical education, which results in insecurity and hampers adequate therapy of diving incidents. This is aggravated by an insufficient availability of hyperbaric chambers in Germany. PMID:22354401

  1. Single pilot IFR accident data analysis

    NASA Technical Reports Server (NTRS)

    Harris, D. F.

    1983-01-01

    The aircraft accident data recorded by the National Transportation and Safety Board (NTSR) for 1964-1979 were analyzed to determine what problems exist in the general aviation (GA) single pilot instrument flight rule (SPIFR) environment. A previous study conducted in 1978 for the years 1964-1975 provided a basis for comparison. This effort was generally limited to SPIFR pilot error landing phase accidents but includes some SPIFR takeoff and enroute accident analysis as well as some dual pilot IFR accident analysis for comparison. Analysis was performed for 554 accidents of which 39% (216) occurred during the years 1976-1979.

  2. Radionuclide release calculations for selected severe accident scenarios

    SciTech Connect

    Denning, R.S.; Leonard, M.T.; Cybulskis, P.; Lee, K.W.; Kelly, R.F.; Jordan, H.; Schumacher, P.M.; Curtis, L.A. )

    1990-08-01

    This report provides the results of source term calculations that were performed in support of the NUREG-1150 study. Severe Accident Risks: An Assessment for Five US Nuclear Power Plants.'' This is the sixth volume of a series of reports. It supplements results presented in the earlier volumes. Analyses were performed for three of the NUREG-1150 plants: Peach Bottom, a Mark I, boiling water reactor; Surry, a subatmospheric containment, pressurized water reactor; and Sequoyah, an ice condenser containment, pressurized water reactor. Complete source term results are presented for the following sequences: short term station blackout with failure of the ADS system in the Peach Bottom plant; station blackout with a pump seal LOCA for the Surry plant; station blackout with a pump seal LOCA in the Sequoyah plant; and a very small break with loss of ECC and spray recirculation in the Sequoyah plant. In addition, some partial analyses were performed which did not require running all of the modules of the Source Term Code Package. A series of MARCH3 analyses were performed for the Surry and Sequoyah plants to evaluate the effects of alternative emergency operating procedures involving primary and secondary depressurization on the progress of the accident. Only thermal-hydraulic results are provided for these analyses. In addition, three accident sequences were analyzed for the Surry plant for accident-induced failure of steam generator tubes. In these analyses, only the transport of radionuclides within the primary system and failed steam generator were examined. The release of radionuclides to the environment is presented for the phase of the accident preceding vessel meltthrough. 17 refs., 176 figs., 113 tabs.

  3. Community emergency response to nuclear power plant accidents: A selected and partially annotated bibliography

    SciTech Connect

    Youngen, G.

    1988-10-01

    The role of responding to emergencies at nuclear power plants is often considered the responsibility of the personnel onsite. This is true for most, if not all, of the incidents that may happen during the course of the plant`s operating lifetime. There is however, the possibility of a major accident occurring at anytime. Major nuclear accidents at Chernobyl and Three Mile Island have taught their respective countries and communities a significant lesson in local emergency preparedness and response. Through these accidents, the rest of the world can also learn a great deal about planning, preparing and responding to the emergencies unique to nuclear power. This bibliography contains books, journal articles, conference papers and government reports on emergency response to nuclear power plant accidents. It does not contain citations for ``onsite`` response or planning, nor does it cover the areas of radiation releases from transportation accidents. The compiler has attempted to bring together a sampling of the world`s collective written experience on dealing with nuclear reactor accidents on the sate, local and community levels. Since the accidents at Three Mile Island and Chernobyl, that written experience has grown enormously.

  4. The kinetics of aerosol particle formation and removal in NPP severe accidents

    NASA Astrophysics Data System (ADS)

    Zatevakhin, Mikhail A.; Arefiev, Valentin K.; Semashko, Sergey E.; Dolganov, Rostislav A.

    2016-06-01

    Severe Nuclear Power Plant (NPP) accidents are accompanied by release of a massive amount of energy, radioactive products and hydrogen into the atmosphere of the NPP containment. A valid estimation of consequences of such accidents can only be carried out through the use of the integrated codes comprising a description of the basic processes which determine the consequences. A brief description of a coupled aerosol and thermal-hydraulic code to be used for the calculation of the aerosol kinetics within the NPP containment in case of a severe accident is given. The code comprises a KIN aerosol unit integrated into the KUPOL-M thermal-hydraulic code. Some features of aerosol behavior in severe NPP accidents are briefly described.

  5. Accidents in the aluminium smelting industry.

    PubMed

    Das, B C; Chaudhury, S

    1995-01-01

    Analysis of the accident records of an aluminium smelting industry, covering about 2,100 employees, over a period of three years, showed a total of 465 accidents of male employees. Out of these, 5 were fatal, 40.86% were from contacts with extreme temperatures, causing burn injury to 42.58%. Hot materials were the agents causing 44.52% of the burn injuries. Molten aluminium constituted 43.96% amongst hot materials. Injury to lower limbs constituted 38.71% and that to upper limbs 36.99%. The accidents occurring to the employees, in the age group of 26-33 years, amounted to 61.72% of the total accidents. The average number of man-days lost per year was 11,153. Average frequency rate of accidents was 30.75 accidents per million man-hours worked. Severity rate of accidents was 2.196 per million man-hours worked. Incident rate per thousand employees was 73.81. Average number of days lost per accidents was 71.95 days and average duration of man-hours between accidents was 32,516. Mean age of the employees, who met with the accidents were 29.53 years. Share of accidents in the second half of each shift was always more than that in the first half, and this average was 66.66%. PMID:8557540

  6. Post-accident cleanup of radioactivity at the Three Mile Island Nuclear Power Station

    SciTech Connect

    Brooksbank, R.E.; Armento, W.J.

    1980-02-01

    The technical staff of the President's Commission on the Accident at Three Mile Island (TMI) requested that Oak Ridge National Laboratory (ORNL) prepare documentation concerned with the cleanup of radioactivity on the Three Mile Island site following the March 28, 1979 accident. The objective of this report is to provide information in a summarized form, which will be of direct usefulness to the commissioners. The information contained herein includes discussion of on-site assistance and accomplishments following the accident, flowsheet development for the TMI recovery team (by the Technical Advisory Group), and the numerous reports already generated on the TMI cleanup and recovery.

  7. The Concept of Accident Proneness: A Review

    PubMed Central

    Froggatt, Peter; Smiley, James A.

    1964-01-01

    The term accident proneness was coined by psychological research workers in 1926. Since then its concept—that certain individuals are always more likely than others to sustain accidents, even though exposed to equal risk—has been questioned but seldom seriously challenged. This article describes much of the work and theory on which this concept is based, details the difficulties encountered in obtaining valid information and the interpretative errors that can arise from the examination of imperfect data, and explains why accident proneness became so readily accepted as an explanation of the facts. A recent hypothesis of accident causation, namely that a person's accident liability may vary from time to time, is outlined, and the respective abilities of this and of accident proneness to accord with data from the more reliable literature are examined. The authors conclude that the hypothesis of individual variation in liability is more realistic and in better agreement with the data than is accident proneness. PMID:14106130

  8. Slipping on pedestrian surfaces: methods for measuring and evaluating the slip resistance.

    PubMed

    Wetzel, Christoph; Windhövel, Ulrich; Mewes, Detlef; Ceylan, Orhan

    2015-01-01

    Tripping, slipping and falling accidents are among the types of accident with a high incidence. This article describes the requirements concerning slip resistance, as well as the state of the art of slip resistance measurement standards in the European Community and the USA. The article also describes how risk assessment can be performed in the field. PMID:26414511

  9. Identification and assessment of containment and release management strategies for a BWR Mark I containment

    SciTech Connect

    Lin, C.C.; Lehner, J.R. )

    1991-09-01

    This report identifies and assesses accident management strategies which could be important for preventing containment failure and/or mitigating the release of fission products during a severe accident in a BWR plant with a Mark 1 type of containment. Based on information available from probabilistic risk assessments and other existing severe accident research, and using simplified containment and release event trees, the report identifies the challenges a Mark 1 containment could face during the course of a severe accident, the mechanisms behind these challenges, and the strategies that could be used to mitigate the challenges. A safety objective tree is developed which provides the connection between the safety objectives, the safety functions, the challenges, and the strategies. The strategies were assessed by applying them to certain severe accident sequence categories which have one or more of the following characteristics: have high probability of core damage or high consequences, lead to a number of challenges, and involve the failure of multiple systems. 59 refs., 55 figs., 27 tabs.

  10. Accident/Mishap Investigation System

    NASA Technical Reports Server (NTRS)

    Keller, Richard; Wolfe, Shawn; Gawdiak, Yuri; Carvalho, Robert; Panontin, Tina; Williams, James; Sturken, Ian

    2007-01-01

    InvestigationOrganizer (IO) is a Web-based collaborative information system that integrates the generic functionality of a database, a document repository, a semantic hypermedia browser, and a rule-based inference system with specialized modeling and visualization functionality to support accident/mishap investigation teams. This accessible, online structure is designed to support investigators by allowing them to make explicit, shared, and meaningful links among evidence, causal models, findings, and recommendations.

  11. Characterization of plutonium particles originating from the BOMARC accident - 1960

    NASA Astrophysics Data System (ADS)

    Gostic, Richard Charles

    Within the U.S. arsenal, 32 accidents with nuclear weapons were reported between 1950 and 1980. One of these accidents occurred at McGuire AFB in 1960. A BOMARC missile armed with a nuclear warhead caught on fire and as a result the warhead was destroyed. Sub-millimeter particles consisting of weapons grade plutonium (WGPu) produced by this accident were distributed around the site and remained in the environment for 47 years. Soil cores known to contain WGPu particles produced by this accident were obtained. The particles were localized and removed from the soil with the aid of high resolution computed tomography. The isotopic composition of the particles and the date of manufacture of the Pu were estimated using a combination of alpha and gamma spectroscopy. Scanning electron microscopy was used to study the surface morphology of the particles; energy dispersive spectroscopy and synchrotron based x-ray fluorescence were used to determine the composition and elemental distributions of the particles. The results of these experiments and their application to the field of nuclear forensic analysis are discussed in this thesis.

  12. Containment venting analysis for the Peach Bottom Atomic Power Station

    SciTech Connect

    Hanson, D.J.; Blackman, H.S.; Nelson, W.R.; Wright, R.E.; Leonard, M.T.; DiSalvo, R.

    1986-12-01

    The extent to which containment venting is an effective means of preventing or mitigating the consequences of overpressurization during severe accidents was evaluated for the Peach Bottom Atomic Power Station Units 2 and 3 (boiling water reactors with Mark I containments). Detailed analyses were conducted on operator performance, equipment performance, and the physical phenomenology for three severe accident sequences currently identified as being important contributors to risk. The results indicate that containment venting can be effective in reducing risk for several classes of severe accidents but, based on procedures in draft form and equipment in place at the time of the analyses, has limited potential for further reducing the risk for severe accidents currently identified as being important contributors to the risk for Peach Bottom.

  13. Analysis of the FeCrAl Accident Tolerant Fuel Concept Benefits during BWR Station Blackout Accidents

    SciTech Connect

    Robb, Kevin R

    2015-01-01

    Iron-chromium-aluminum (FeCrAl) alloys are being considered for fuel concepts with enhanced accident tolerance. FeCrAl alloys have very slow oxidation kinetics and good strength at high temperatures. FeCrAl could be used for fuel cladding in light water reactors and/or as channel box material in boiling water reactors (BWRs). To estimate the potential safety gains afforded by the FeCrAl concept, the MELCOR code was used to analyze a range of postulated station blackout severe accident scenarios in a BWR/4 reactor employing FeCrAl. The simulations utilize the most recently known thermophysical properties and oxidation kinetics for FeCrAl. Overall, when compared to the traditional Zircaloy-based cladding and channel box, the FeCrAl concept provides a few extra hours of time for operators to take mitigating actions and/or for evacuations to take place. A coolable core geometry is retained longer, enhancing the ability to stabilize an accident. Finally, due to the slower oxidation kinetics, substantially less hydrogen is generated, and the generation is delayed in time. This decreases the amount of non-condensable gases in containment and the potential for deflagrations to inhibit the accident response.

  14. Fumigant toxicity of summer savory and lemon balm oil constituents and efficacy of spray formulations containing the oils to B- and neonicotinoid-resistant Q-biotypes of Bemisia tabaci (Homoptera: Aleyrodidae).

    PubMed

    Chae, Song-Hwa; Kim, Soon-Il; Yeon, Seong Hum; Perumalsamy, Haribalan; Ahn, Young-Joon

    2014-02-01

    An assessment was made of the fumigant toxicity of 36 constituents from lemon balm oil (LBO) and summer savory oil (SSO) and another additional nine previously identified compounds of the oils, as well as of the control efficacy of four experimental spray formulations containing individual oils (0.5 and 0.1% sprays) and spinosad 10% suspension concentrate (SC) to females from B- and neonicotinoid-resistant Q-biotypes of Bemisia tabaci (Gennadius) (Homoptera: Aleyrodidae). Based on 24-h LC50 values, Q-biotype females (0.20 microg/cm3) were 40 times less susceptible to dichlorvos than B-biotype females (0.005 microg/cm3). Thymol (LC50, 0.35 microg/cm3) and carvacrol (0.56 microg/cm3) were the most toxic compounds toward Q-biotype females, followed by (1S)-(-)-borneol, alpha-terpineol, nerol, linalool, and carvone (1.06-1.38 microg/cm3). The toxicity of these compounds was virtually identical toward both biotype females, indicating that the terpenoids and the insecticides (neonicotinoids and dichlorvos) do not share a common mode of action or elicit cross-resistance. The 0.5% spray of LBO, SSO, and spinosad 10% SC resulted in >90% mortality toward both biotype females. Global efforts to reduce the level of toxic synthetic insecticides in the agricultural environment justify further studies on LBO- and SSO-derived materials as potential contact-action fumigants for the control of B. tabaci populations. PMID:24665712

  15. Temporal Statistic of Traffic Accidents in Turkey

    NASA Astrophysics Data System (ADS)

    Erdogan, S.; Yalcin, M.; Yilmaz, M.; Korkmaz Takim, A.

    2015-10-01

    Traffic accidents form clusters in terms of geographic space and over time which themselves exhibit distinct spatial and temporal patterns. There is an imperative need to understand how, where and when traffic accidents occur in order to develop appropriate accident reduction strategies. An improved understanding of the location, time and reasons for traffic accidents makes a significant contribution to preventing them. Traffic accident occurrences have been extensively studied from different spatial and temporal points of view using a variety of methodological approaches. In literature, less research has been dedicated to the temporal patterns of traffic accidents. In this paper, the numbers of traffic accidents are normalized according to the traffic volume and the distribution and fluctuation of these accidents is examined in terms of Islamic time intervals. The daily activities and worship of Muslims are arranged according to these time intervals that are spaced fairly throughout the day according to the position of the sun. The Islamic time intervals are never been used before to identify the critical hour for traffic accidents in the world. The results show that the sunrise is the critical time that acts as a threshold in the rate of traffic accidents throughout Turkey in Islamic time intervals.

  16. A direct comparison of MELCOR 1.8.3 and MAAP4 results for several PWR & BWR accident sequences

    SciTech Connect

    Leonard, M.T.; Ashbaugh, S.G.; Cole, R.K.; Bergeron, K.D.; Nagashima, K.

    1996-08-01

    This paper presents a comparison of calculations of severe accident progression for several postulated accident sequences for representative Pressurized Water Reactors (PWR) and Boiling Water Reactors (BWR) nuclear power plants performed with the MELCOR 1.8.3 and the MAAP4 computer codes. The PWR system examined in this study is a 1100 MWe system similar in design to a Westinghouse 3-loop plant with a large dry containment; the BWR is a 1100 MWe system similar in design to General Electric BWR/4 with a Mark I containment. A total of nine accident sequences were studied with both codes. Results of these calculations are compared to identify major differences in the timing of key events in the calculated accident progression or other important aspects of severe accident behavior, and to identify specific sources of the observed differences.

  17. Sharps container

    NASA Technical Reports Server (NTRS)

    Lee, Angelene M. (Inventor)

    1992-01-01

    This invention relates to a system for use in disposing of potentially hazardous items and more particularly a Sharps receptacle for used hypodermic needles and the like. A Sharps container is constructed from lightweight alodined nonmagnetic metal material with a cup member having an elongated tapered shape and length greater than its transverse dimensions. A magnet in the cup member provides for metal retention in the container. A nonmagnetic lid member has an opening and spring biased closure flap member. The flap member is constructed from stainless steel. A Velcro patch on the container permits selective attachment at desired locations.

  18. Risk and protection factors in fatal accidents.

    PubMed

    Dupont, Emmanuelle; Martensen, Heike; Papadimitriou, Eleonora; Yannis, George

    2010-03-01

    This paper aims at addressing the interest and appropriateness of performing accident severity analyses that are limited to fatal accident data. Two methodological issues are specifically discussed, namely the accident-size factors (the number of vehicles in the accident and their level of occupancy) and the comparability of the baseline risk. It is argued that - although these two issues are generally at play in accident severity analyses - their effects on, e.g., the estimation of survival probability, are exacerbated if the analysis is limited to fatal accident data. As a solution, it is recommended to control for these effects by (1) including accident-size indicators in the model, (2) focusing on different sub-groups of road-users while specifying the type of opponent in the model, so as to ensure that comparable baseline risks are worked with. These recommendations are applied in order to investigate risk and protection factors of car occupants involved in fatal accidents using data from a recently set up European Fatal Accident Investigation database (Reed and Morris, 2009). The results confirm that the estimated survival probability is affected by accident-size factors and by type of opponent. The car occupants' survival chances are negatively associated with their own age and that of their vehicle. The survival chances are also lower when seatbelt is not used. Front damage, as compared to other damaged car areas, appears to be associated with increased survival probability, but mostly in the case in which the accident opponent was another car. The interest of further investigating accident-size factors and opponent effects in fatal accidents is discussed. PMID:20159090

  19. Resistance Factor-Mediated Spectinomycin Resistance

    PubMed Central

    Smith, David H.; Janjigian, J. A.; Prescott, Naomi; Anderson, Porter W.

    1970-01-01

    Of 100 natural isolates of drug-resistant enteric bacteria, 51 were resistant to spectinomycin (Spc) and 46 contained transferable R factors mediating Spc resistance. All SpcR R factors mediated streptomycin and bluensomycin resistance and were fi+ type. Extracts of R-SpcR strains adenylated Spc, dihydrospectinomycin, actinamine, streptomycin, and bluensomycin in vitro in the presence of adenosine triphosphate and Mg++. Results of genetic and biochemical studies support the hypothesis that these reactions are mediated by a single enzyme. PMID:16557684

  20. Galileo's Trajectory with Mild Resistance

    ERIC Educational Resources Information Center

    Groetsch, C. W.

    2012-01-01

    An aspect of Galileo's classical trajectory that persists in a simple resistance model is noted. The resistive model provides a case study for the classroom analysis of limiting behaviour of an implicitly defined function. (Contains 1 note.)

  1. Waste Evaporator Accident Simulation Using RELAP5 Computer Code

    SciTech Connect

    POLIZZI, L.M.

    2004-04-28

    An evaporator is used on liquid waste from processing facilities to reduce the volume of the waste through heating the waste and allowing some of the water to be separated from the waste through boiling. This separation process allows for more efficient processing and storage of liquid waste. Commonly, the liquid waste consists of an aqueous solution of chemicals that over time could induce corrosion, and in turn weaken the tubes in the steam tube bundle of the waste evaporator that are used to heat the waste. This chemically induced corrosion could escalate into a possible tube leakage and/or the severance of a tube(s) in the tube bundle. In this paper, analyses of a waste evaporator system for the processing of liquid waste containing corrosive chemicals are presented to assess the system response to this accident scenario. This accident scenario is evaluated since its consequences can propagate to a release of hazardous material to the outside environment. It is therefore important to ensure that the evaporator system component structural integrity is not compromised, i.e. the design pressure and temperature of the system is not exceeded during the accident transient. The computer code used for the accident simulation is RELAP5-MOD31. The accident scenario analyzed includes a double-ended guillotine break of a tube in the tube bundle of the evaporator. A mitigated scenario is presented to evaluate the excursion of the peak pressure and temperature in the various components of the evaporator system to assess whether the protective actions and controls available are adequate to ensure that the structural integrity of the evaporator system is maintained and that no atmospheric release occurs.

  2. MSHA releases data on CM crushing accidents

    SciTech Connect

    2007-02-15

    The US Mine Safety and Health Administration (MHSA) recently formed a committee to identify norms and trends in remote control continuous miner crushing accidents. The final report found that these types of accidents commonly happen to experienced miners during routine mining activities, with the majority occurring while moving the miner from one face to another, place changing. Another common aspect of the accidents is that many of the victims are experienced miners who are newly employed at the mine where the accident occurred. Training all employees to stay outside the turning radius of an energized remote control continuous miner, establishing this as a safe operating procedure, and consistently enforcing this practice among miners will reduce these types of accidents. This article was excerpted from the 'Remote Control Continuous Mining Machine Crushing Accident Data Study' published in May 2006. The report may be found from the website: www.msha.gov. 4 figs., 1 tab.

  3. Organisational accidents investigation methodology and lessons learned.

    PubMed

    Dien, Yves; Llory, Michel; Montmayeul, René

    2004-07-26

    The purpose of this paper is to reflect on accident analysis methods. As the understanding of industrial accidents and incidents has evolved, they are no longer considered as the sole product of human and/or technical failures but also as originating in an unfavourable organisational context. After presenting some theoretical developments which are responsible for this evolution, we will propose two examples of organisational accidents and incidents. We will then present some properties of organisational accidents, and we will focus on some "accident-generating" organisational factors. The definition of these factors comes from an empirical approach to event analysis. Finally, we will briefly present their implications for accident and incident analysis. PMID:15231360

  4. Transportation accident scenarios for commercial spent fuel

    SciTech Connect

    Wilmot, E L

    1981-02-01

    A spectrum of high severity, low probability, transportation accident scenarios involving commercial spent fuel is presented together with mechanisms, pathways and quantities of material that might be released from spent fuel to the environment. These scenarios are based on conclusions from a workshop, conducted in May 1980 to discuss transportation accident scenarios, in which a group of experts reviewed and critiqued available literature relating to spent fuel behavior and cask response in accidents.

  5. Calculation notes that support accident scenario and consequence development for the subsurface leak remaining subsurface accident

    SciTech Connect

    Ryan, G.W., Westinghouse Hanford

    1996-07-12

    This document supports the development and presentation of the following accident scenario in the TWRS Final Safety Analysis Report: Subsurface Leak Remaining Subsurface. The calculations needed to quantify the risk associated with this accident scenario are included within.

  6. Calculation notes that support accident scenario and consequence development for the subsurface leak remaining subsurface accident

    SciTech Connect

    Ryan, G.W., Westinghouse Hanford

    1996-09-19

    This document supports the development and presentation of the following accident scenario in the TWRS Final Safety Analysis Report: Subsurface Leak Remaining Subsurface. The calculations needed to quantify the risk associated with this accident scenario are included within.

  7. Industrial Safety and Accidents Prevention

    SciTech Connect

    Sajjad Akbar

    2006-07-01

    Accident Hazards, dangers, losses and risk are what we would to like to eliminate, minimize or avoid in industry. Modern industries have created many opportunities for these against which man's primitive instincts offer no protection. In today's complex industrial environment safety has become major preoccupation, especially after the realization that there is a clear economic incentive to do so. Industrial hazards may cause by human error or by physical or mechanical malfunction, it is very often possible to eliminate the worst consequences of human error by engineering modification. But the modification also needs checking very thoroughly to ensue that it has not introduced some new and unsuspected hazard. (author)

  8. Silent mutations at codons 65 and 66 in reverse transcriptase alleviate indel formation and restore fitness in subtype B HIV-1 containing D67N and K70R drug resistance mutations

    PubMed Central

    Telwatte, Sushama; Hearps, Anna C.; Johnson, Adam; Latham, Catherine F.; Moore, Katie; Agius, Paul; Tachedjian, Mary; Sonza, Secondo; Sluis-Cremer, Nicolas; Harrigan, P. Richard; Tachedjian, Gilda

    2015-01-01

    Resistance to combined antiretroviral therapy (cART) in HIV-1-infected individuals is typically due to nonsynonymous mutations that change the protein sequence; however, the selection of synonymous or ‘silent’ mutations in the HIV-1 genome with cART has been reported. These silent K65K and K66K mutations in the HIV-1 reverse transcriptase (RT) occur in over 35% of drug-experienced individuals and are highly associated with the thymidine analog mutations D67N and K70R, which confer decreased susceptibility to most nucleoside and nucleotide RT inhibitors. However, the basis for selection of these silent mutations under selective drug pressure is unknown. Using Illumina next-generation sequencing, we demonstrate that the D67N/K70R substitutions in HIV-1 RT increase indel frequency by 100-fold at RT codons 65–67, consequently impairing viral fitness. Introduction of either K65K or K66K into HIV-1 containing D67N/K70R reversed the error-prone DNA synthesis at codons 65–67 in RT and improved viral replication fitness, but did not impact RT inhibitor drug susceptibility. These data provide new mechanistic insights into the role of silent mutations selected during antiretroviral therapy and have broader implications for the relevance of silent mutations in the evolution and fitness of RNA viruses. PMID:25765644

  9. Corrosion Resistances of Iron-Based Amorphous Metals with Yttrium and Tungsten Additions in Hot Calcium Chloride Brine & Natural Seawater: Fe48Mo14Cr15Y2C15B6 and W-Containing Variants

    SciTech Connect

    Farmer, J C; Haslam, J; Day, S; Lian, T; Saw, C; Hailey, P; Choi, J; Yang, N; Blue, C; Peter, W; Payer, J; Branagan, D J

    2006-10-20

    Yttrium-containing SAM1651 (Fe{sub 48.0}Cr{sub 15.0}Mo{sub 14.0}B{sub 6.0}C{sub 15.0}Y{sub 2.0}), has a critical cooling rate (CCR) of approximately 80 Kelvin per second, while SAM2X5 (Fe{sub 49.7}Cr{sub 17.7}Mn{sub 1.9}Mo{sub 7.4}W{sub 1.6}B{sub 15.2}C{sub 3.8}Si{sub 2.4}) with no yttrium has a higher critical cooling rate of approximately 600 Kelvin per second. SAM1651's low CCR enables it to be rendered as a completely amorphous material in practical materials processes. Chromium (Cr), molybdenum (Mo) and tungsten (W) provide corrosion resistance; boron (B) enables glass formation; and rare earths such as yttrium (Y) lower critical cooling rate (CCR). The passive film stability of these Fe-based amorphous metal formulations have been found to be superior to that of conventional stainless steels, and comparable to that of Ni-based alloys, based on electrochemical measurements of the passive film breakdown potential and general corrosion rates.

  10. Aircraft Loss-of-Control Accident Analysis

    NASA Technical Reports Server (NTRS)

    Belcastro, Christine M.; Foster, John V.

    2010-01-01

    Loss of control remains one of the largest contributors to fatal aircraft accidents worldwide. Aircraft loss-of-control accidents are complex in that they can result from numerous causal and contributing factors acting alone or (more often) in combination. Hence, there is no single intervention strategy to prevent these accidents. To gain a better understanding into aircraft loss-of-control events and possible intervention strategies, this paper presents a detailed analysis of loss-of-control accident data (predominantly from Part 121), including worst case combinations of causal and contributing factors and their sequencing. Future potential risks are also considered.

  11. The determinants of fishing vessel accident severity.

    PubMed

    Jin, Di

    2014-05-01

    The study examines the determinants of fishing vessel accident severity in the Northeastern United States using vessel accident data from the U.S. Coast Guard for 2001-2008. Vessel damage and crew injury severity equations were estimated separately utilizing the ordered probit model. The results suggest that fishing vessel accident severity is significantly affected by several types of accidents. Vessel damage severity is positively associated with loss of stability, sinking, daytime wind speed, vessel age, and distance to shore. Vessel damage severity is negatively associated with vessel size and daytime sea level pressure. Crew injury severity is also positively related to the loss of vessel stability and sinking. PMID:24473412

  12. Accidents in family forestry's firewood production.

    PubMed

    Lindroos, Ola; Aspman, Emma Wilhelmson; Lidestav, Gun; Neely, Gregory

    2008-05-01

    Firewood is commonly used around the world, but little is known about the work involved in its production and associated accidents. The objectives were to identify relationships between accidents and time exposure, workers' age and sex, equipment used and work activities in family forestry's firewood production. Data from a postal survey in Northern Sweden were compared to a database of injuries in the same region. Most accidents occurred to 50-69 year old men, who also worked most hours. No significant differences in sex and age were found between expected and recorded accident frequencies when calculated from total work hours; however, when calculated using numbers of active persons significant differences were found for both age and sex. Frequency of accidents per unit worked time was higher for machine involving activities than for other activities. Accidents that occurred when using wedge splitter machines were responsible for most of this overrepresentation. Fingers were the most commonly injured body parts. Mean accident rate for the equipment used was 87 accidents per million work hours, and the rate was highest for wedge splitters (122 accidents per million work hours). Exposure to elevated risks due to violation of safety procedures is discussed, as well as possible preventative measures. PMID:18460354

  13. Thermal hydraulic features of the TMI accident

    NASA Astrophysics Data System (ADS)

    Tolman, B.

    1985-10-01

    The Three Mile island (TMI)-2 accident resulted in extensive core damage and recent data confirms that the reactor vessel was challenged from molten core materials. A hypothesized TMI accident scenario is presented that consistently explains the TMI data and is also consistent with research findings from independent severe fuel damage experiments. The TMI data will prove useful in confirming our understanding of severe core damage accidents under realistic reactor systems conditions. This understanding will aid in addressing safety and regulatory issues related to severe core damage accidents in light water reactors.

  14. Occupational Accidents with Agricultural Machinery in Austria.

    PubMed

    Kogler, Robert; Quendler, Elisabeth; Boxberger, Josef

    2016-01-01

    The number of recognized accidents with fatalities during agricultural and forestry work, despite better technology and coordinated prevention and trainings, is still very high in Austria. The accident scenarios in which people are injured are very different on farms. The common causes of accidents in agriculture and forestry are the loss of control of machine, means of transport or handling equipment, hand-held tool, and object or animal, followed by slipping, stumbling and falling, breakage, bursting, splitting, slipping, fall, and collapse of material agent. In the literature, a number of studies of general (machine- and animal-related accidents) and specific (machine-related accidents) agricultural and forestry accident situations can be found that refer to different databases. From the database Data of the Austrian Workers Compensation Board (AUVA) about occupational accidents with different agricultural machinery over the period 2008-2010 in Austria, main characteristics of the accident, the victim, and the employer as well as variables on causes and circumstances by frequency and contexts of parameters were statistically analyzed by employing the chi-square test and odds ratio. The aim of the study was to determine the information content and quality of the European Statistics on Accidents at Work (ESAW) variables to evaluate safety gaps and risks as well as the accidental man-machine interaction. PMID:26479843

  15. Possible consequences of severe accidents at the Lubiatowo site, Poland

    NASA Astrophysics Data System (ADS)

    Seibert, Petra; Philipp, Anne; Hofman, Radek; Gufler, Klaus; Sholly, Steven

    2014-05-01

    The construction of a nuclear power plant is under consideration in Poland. One of the sites under discussion is near Lubiatowo, located on the cost of the Baltic Sea northwest of Gdansk. An assessment of possible environmental consequences is carried out for 88 real meteorological cases with the Lagrangian particle dispersion model FLEXPART. Based on literature research, three reactor designs (ABWR, EPR, AP 1000) were identified as being under discussion in Poland. For each of the designs, a set of accident scenarios was evaluated and two source terms per reactor design were selected for analysis. One of the selected source terms was a relatively large release while the second one was a severe accident with an intact containment. Considered endpoints of the calculations are ground contamination with Cs-137 and time-integrated concentrations of I-131 in air as well as committed doses. They are evaluated on a grid of ca. 3 km mesh size covering eastern Central Europe.

  16. A regulatory assessment of test data for reactivity accidents

    SciTech Connect

    Meyer, R.O.; Scott, H.H.; Chung, Hee M.

    1997-09-01

    An assessment is made of recent test data from France, Japan, and Russia, and of earlier test data from the U.S., in relation to the safety analysis performed for power reactors in the U.S. Considerations include mode of cladding failure, oxidation, hydriding, and pulse-width effects. From the data trend and from these considerations, it is concluded that the cladding failure threshold for fuel rods with moderate-to-high burnup is roughly 100 cal/g for BWRs and PWRs. Realistic plant calculations suggest that cladding failure would not occur for rod-ejection or rod-drop accidents and, therefore, that pellet fragmentation and enhanced fission product release from fuel pellets should not have to be considered in the safety analysis for these accidents. However, the data base is sparse and contains a lot of uncertainty.

  17. Enhanced Accident Tolerant LWR Fuels National Metrics Workshop Report

    SciTech Connect

    Lori Braase

    2013-01-01

    The U.S. Department of Energy Office of Nuclear Energy (DOE-NE), in collaboration with the nuclear industry, has been conducting research and development (R&D) activities on advanced Light Water Reactor (LWR) fuels for the last few years. The emphasis for these activities was on improving the fuel performance in terms of increased burnup for waste minimization and increased power density for power upgrades, as well as collaborating with industry on fuel reliability. After the events at the Fukushima Nuclear Power Plant in Japan in March 2011, enhancing the accident tolerance of LWRs became a topic of serious discussion. In the Consolidated Appropriations Act, 2012, Conference Report 112-75, the U.S. Congress directed DOE-NE to: • Give “priority to developing enhanced fuels and cladding for light water reactors to improve safety in the event of accidents in the reactor or spent fuel pools.” • Give “special technical emphasis and funding priority…to activities aimed at the development and near-term qualification of meltdown-resistant, accident-tolerant nuclear fuels that would enhance the safety of present and future generations of light water reactors.” • Report “to the Committee, within 90 days of enactment of this act, on its plan for development of meltdown-resistant fuels leading to reactor testing and utilization by 2020.” Fuels with enhanced accident tolerance are those that, in comparison with the standard UO2-zirconium alloy system currently used by the nuclear industry, can tolerate loss of active cooling in the reactor core for a considerably longer time period (depending on the LWR system and accident scenario) while maintaining or improving the fuel performance during normal operations, and operational transients, as well as design-basis and beyond design-basis events. The overall draft strategy for development and demonstration is comprised of three phases: Feasibility Assessment and Down-selection; Development and Qualification; and

  18. 41 CFR 101-39.407 - Accident records.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 41 Public Contracts and Property Management 2 2011-07-01 2007-07-01 true Accident records. 101-39...-INTERAGENCY FLEET MANAGEMENT SYSTEMS 39.4-Accidents and Claims § 101-39.407 Accident records. If GSA's records of vehicle accidents indicate that a particular activity has had an unusually high accident...

  19. 22 CFR 102.17 - Reports on accident.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Reports on accident. 102.17 Section 102.17... Accidents Abroad Foreign Aircraft Accidents Involving United States Persons Or Property § 102.17 Reports on accident. When an accident occurs to a foreign aircraft in the district of a Foreign Service post...

  20. 22 CFR 102.17 - Reports on accident.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Reports on accident. 102.17 Section 102.17... Accidents Abroad Foreign Aircraft Accidents Involving United States Persons Or Property § 102.17 Reports on accident. When an accident occurs to a foreign aircraft in the district of a Foreign Service post...

  1. 41 CFR 101-39.407 - Accident records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Accident records. 101-39...-INTERAGENCY FLEET MANAGEMENT SYSTEMS 39.4-Accidents and Claims § 101-39.407 Accident records. If GSA's records of vehicle accidents indicate that a particular activity has had an unusually high accident...

  2. Accidents at work in the health care - legal aspects in Poland.

    PubMed

    Szereda, Kamil; Szymańska, Jolanta

    2016-01-01

    An accident at work is a sudden event caused by external circumstances that occurred in relation to work. Referring to the current legislation, the Supreme Court judgments and the opinions contained in publications, the authors discuss the legal aspects of selected accidents: needle stick injuries, cuts with other sharp tools, heart attacks and strokes among health professionals and social workers in Poland. It has been stressed that defining rigid criteria that allow for stating unequivocal work - accidents relationships would be difficult or even impossible. Especially in the case of medical personnel the long-term and negative impact of stress on health is significant, and thus the occurrence of work accidents - heart attack or stroke. PMID:26891442

  3. [What kind of accidents can happen in a nuclear power plant].

    PubMed

    Debes, M

    1995-03-15

    The lessons drawn from real reactor accidents are of great value. The safety approach in France relies on defence in depth and takes into account accidents in the plant design, completed by a probabilistic approach and experience feedback. Ultimate procedures are implemented on the basis of severe accidents studies which include core melting or partial containment defect, in order to mitigate their consequences even if they are improbable, and to enable a proper implementation of emergency planning countermeasures. The accident hypothesis and consequences are considered to draw the emergency planning procedures. Off site countermeasures, such as in house-confinement, limited evacuation or iodine distribution, are efficient in limiting the consequences for the public. Experience feedback, in association with a proactive vigilance and prevention policy, is developed in order to detect and correct in a proactive way the root causes of any deviation, even minor, so as to avoid multiple failures and ensure safety. PMID:7754324

  4. Collapsing Containers.

    ERIC Educational Resources Information Center

    Brown, Justina L.; Battino, Rubin

    1994-01-01

    Describes variations on atmospheric pressure demonstrations and some systematic studies. Demonstrations use steam, generated either externally or internally to the container, to sweep out residual air. Preferred vessels collapsed slowly. Demonstrations use plastic milk jugs set in layers of aluminum foil, pop bottles immersed in 4-L beakers…

  5. CONTAINMENT TECHNOLOGIES

    EPA Science Inventory

    Hazardous waste containment's primary objective is to isolate wastes deemed as hazardous from man and environmental systems of air, soil, and water. Hazardous wastes differ from other waste classifications due to their increased potential to cause human health effects or environ...

  6. THREE MILE ISLAND NUCLEAR REACTOR ACCIDENT OF MARCH 1979. ENVIRONMENTAL RADIATION DATA: VOLUME V. A REPORT TO THE PRESIDENT'S COMMISSION ON THE ACCIDENT AT THREE MILE ISLAND

    EPA Science Inventory

    This report contains a listing of environmental radiation monitoring data collected in the vicinity of Three Mile Island (TMI) following the March 28, 1979 accident. These data were collected by the EPA, NRC, DOE, HHS, the Commonwealth of Pennsylvania, or the Bethlehem Steel Corp...

  7. THREE MILE ISLAND NUCLEAR REACTOR ACCIDENT OF MARCH 1979. ENVIRONMENTAL RADIATION DATA: VOLUME I. A REPORT TO THE PRESIDENT'S COMMISSION ON THE ACCIDENT AT THREE MILE ISLAND

    EPA Science Inventory

    This report contains a listing of environmental radiation monitoring data collected in the vicinity of Three Mile Island (TMI) following the March 28, 1979 accident. These data were collected by the EPA, NRC, DOE, HHS, the Commonwealth of Pennsylvania, or the Bethlehem Steel Corp...

  8. THREE MILE ISLAND NUCLEAR REACTOR ACCIDENT OF MARCH 1979. ENVIRONMENTAL RADIATION DATA: UPDATE. A REPORT TO THE PRESIDENT'S COMMISSION ON THE ACCIDENT AT THREE MILE ISLAND

    EPA Science Inventory

    This report contains a listing of environmental radiation monitoring data collected in the vicinity of Three Mile Island (TMI) following the March 28, 1979 accident. These data were collected by the EPA, NRC, DOE, HHS, the Commonwealth of Pennsylvania, or the Bethlehem Steel Corp...

  9. THREE MILE ISLAND NUCLEAR REACTOR ACCIDENT OF MARCH 1979. ENVIRONMENTAL RADIATION DATA: VOLUME IV. A REPORT TO THE PRESIDENT'S COMMISSION ON THE ACCIDENT AT THREE MILE ISLAND

    EPA Science Inventory

    This report contains a listing of environmental radiation monitoring data collected in the vicinity of Three Mile Island (TMI) following the March 28, 1979 accident. These data were collected by the EPA, NRC, DOE, HHS, the Commonwealth of Pennsylvania, or the Bethlehem Steel Corp...

  10. THREE MILE ISLAND NUCLEAR REACTOR ACCIDENT OF MARCH 1979. ENVIRONMENTAL RADIATION DATA: VOLUME III. A REPORT TO THE PRESIDENT'S COMMISSION ON THE ACCIDENT AT THREE MILE ISLAND

    EPA Science Inventory

    This report contains a listing of environmental radiation monitoring data collected in the vicinity of Three Mile Island (TMI) following the March 28, 1979 accident. These data were collected by the EPA, NRC, DOE, HHS, the Commonwealth of Pennsylvania, or the Bethlehem Steel Corp...

  11. THREE MILE ISLAND NUCLEAR REACTOR ACCIDENT OF MARCH 1979. ENVIRONMENTAL RADIATION DATA: VOLUME VI. A REPORT TO THE PRESIDENT'S COMMISSION ON THE ACCIDENT AT THREE MILE ISLAND

    EPA Science Inventory

    This report contains a listing of environmental radiation monitoring data collected in the vicinity of Three Mile Island (TMI) following the March 28, 1979 accident. These data were collected by the EPA, NRC, DOE, HHS, the Commonwealth of Pennsylvania, or the Bethlehem Steel Corp...

  12. THREE MILE ISLAND NUCLEAR REACTOR ACCIDENT OF MARCH 1979. ENVIRONMENTAL RADIATION DATA: VOLUME II. A REPORT TO THE PRESIDENT'S COMMISSION ON THE ACCIDENT AT THREE MILE ISLAND

    EPA Science Inventory

    This report contains a listing of environmental radiation monitoring data collected in the vicinity of Three Mile Island (TMI) following the March 28, 1979 accident. These data were collected by the EPA, NRC, DOE, HHS, the Commonwealth of Pennsylvania, or the Bethlehem Steel Corp...

  13. Passive decay heat removal by natural air convection after severe accidents

    SciTech Connect

    Erbacher, F.J.; Neitzel, H.J.; Cheng, X.

    1995-09-01

    The composite containment proposed by the Research Center Karlsruhe and the Technical University Karlsruhe is to cope with severe accidents. It pursues the goal to restrict the consequences of core meltdown accidents to the reactor plant. One essential of this new containment concept is its potential to remove the decay heat by natural air convection and thermal radiation in a passive way. To investigate the coolability of such a passive cooling system and the physical phenomena involved, experimental investigations are carried out at the PASCO test facility. Additionally, numerical calculations are performed by using different codes. A satisfying agreement between experimental data and numerical results is obtained.

  14. Fission product transport analysis in a loss of decay heat removal accident at Browns Ferry

    SciTech Connect

    Wichner, R.P.; Weber, C.F.; Hodge, S.A.; Beahm, E.C.; Wright, A.L.

    1984-01-01

    This paper summarizes an analysis of the movement of noble gases, iodine, and cesium fission products within the Mark-I containment BWR reactor system represented by Browns Ferry Unit 1 during a postulated accident sequence initiated by a loss of decay heat removal (DHR) capability following a scram. The event analysis showed that this accident could be brought under control by various means, but the sequence with no operator action ultimately leads to containment (drywell) failure followed by loss of water from the reactor vessel, core degradation due to overheating, and reactor vessel failure with attendant movement of core debris onto the drywell floor.

  15. CONTAINER MATERIALS, FABRICATION AND ROBUSTNESS

    SciTech Connect

    Dunn, K.; Louthan, M.; Rawls, G.; Sindelar, R.; Zapp, P.; Mcclard, J.

    2009-11-10

    The multi-barrier 3013 container used to package plutonium-bearing materials is robust and thereby highly resistant to identified degradation modes that might cause failure. The only viable degradation mechanisms identified by a panel of technical experts were pressurization within and corrosion of the containers. Evaluations of the container materials and the fabrication processes and resulting residual stresses suggest that the multi-layered containers will mitigate the potential for degradation of the outer container and prevent the release of the container contents to the environment. Additionally, the ongoing surveillance programs and laboratory studies should detect any incipient degradation of containers in the 3013 storage inventory before an outer container is compromised.

  16. 49 CFR 659.33 - Accident notification.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Accident notification. 659.33 Section 659.33 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION... Agency § 659.33 Accident notification. (a) The oversight agency must require the rail transit agency...

  17. A Serious Game for Traffic Accident Investigators

    ERIC Educational Resources Information Center

    Binsubaih, Ahmed; Maddock, Steve; Romano, Daniela

    2006-01-01

    In Dubai, traffic accidents kill one person every 37 hours and injure one person every 3 hours. Novice traffic accident investigators in the Dubai police force are expected to "learn by doing" in this intense environment. Currently, they use no alternative to the real world in order to practice. This paper argues for the use of an alternative…

  18. 22 CFR 102.8 - Reporting accidents.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Accidents Abroad § 102.8 Reporting accidents. (a) To airline and Civil Aeronautics Administration representatives. If a scheduled United States air carrier is involved the airline representatives concerned will... promptly to the nearest office of the airline concerned and to the nearest office of the Civil...

  19. Traffic accidents, facial injuries, and psychiatry.

    PubMed

    Berger, J C

    1975-01-01

    The extent to which emotional factors play a direct or indirect role in the causation of traffic accidents has been presented along with the early and late emotional response of individuals to facial injuries as a result of traffic accidents. Illustrated case histories are presented. PMID:1116323

  20. 48 CFR 36.513 - Accident prevention.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Accident prevention. 36.513 Section 36.513 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL... prevention. (a) The contracting officer shall insert the clause at 52.236-13, Accident Prevention,...

  1. 76 FR 55079 - Recreational Vessel Accident Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-06

    ...The Coast Guard has received recommendations from the National Boating Safety Advisory Council (NBSAC) regarding potential ways to improve the recreational boating accident reporting process. NBSAC recommended that the Coast Guard: (1) Use a two-tiered reporting system for boating accidents; and (2) take steps to clarify what, how, and when information is reported. This notice solicits public......

  2. 49 CFR 659.33 - Accident notification.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Accident notification. 659.33 Section 659.33 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION... Agency § 659.33 Accident notification. (a) The oversight agency must require the rail transit agency...

  3. Normal Accident at Three Mile Island.

    ERIC Educational Resources Information Center

    Perrow, Charles

    1981-01-01

    Discusses some aspects of the accident at the Three Mile Island nuclear power plant. Explains a number of factors involved including the type of accident, warnings, design and equipment failure, operator error, and negative synergy. Presents alternatives to systems with catastrophic potential. (MK)

  4. Human Factors in Cabin Accident Investigations

    NASA Technical Reports Server (NTRS)

    Chute, Rebecca D.; Rosekind, Mark R. (Technical Monitor)

    1996-01-01

    Human factors has become an integral part of the accident investigation protocol. However, much of the investigative process remains focussed on the flight deck, airframe, and power plant systems. As a consequence, little data has been collected regarding the human factors issues within and involving the cabin during an accident. Therefore, the possibility exists that contributing factors that lie within that domain may be overlooked. The FAA Office of Accident Investigation is sponsoring a two-day workshop on cabin safety accident investigation. This course, within the workshop, will be of two hours duration and will explore relevant areas of human factors research. Specifically, the three areas of discussion are: Information transfer and resource management, fatigue and other physical stressors, and the human/machine interface. Integration of these areas will be accomplished by providing a suggested checklist of specific cabin-related human factors questions for investigators to probe following an accident.

  5. Catalog of PRA dominant accident sequence information

    SciTech Connect

    Cathey, N.G.; Krantz, E.A.; Poloski, J.P.; Shapiro, B.J.

    1985-07-01

    Information concerning the dominant accident sequences from twelve published probabilistic risk assessments (PRA) is cataloged in this report, which is published as a part of the Accident Sequence Evaluation Program (ASEP). The purpose of this report is to provide users of PRA information a single reference document. The cataloged results include plant operation information, core-melt frequency, event tree models, dominant factors affecting core-melt and sequence frequencies, and a description of each dominant accident sequence. The report provides a consistent set of insights on the factors that drive the dominant accident sequences. ASEP has reconstructed the PRA fault tree models at the system or train level of detail and requantified the sequence likelihoods to provide the consistent insights. This work provides the information for the other ASEP activities on accident likelihood assessment for the operating and near-term operating plants.

  6. Ethnic differences in accident rates at work.

    PubMed Central

    Baker, C C

    1987-01-01

    The accidents at work of 4482 employees in a car engine machining and assembly plant in south east England were studied retrospectively over a 12 month period. The study population was composed of Asian (22%), white (66%), and West Indian employees (12%). The crude accident rates differed among the groups, the means being Asians 1.58, white 1.23, and West Indians 1.28. There was, however, no consistent ethnic difference after adjustment for other factors such as age, type of job, and duration of service. Accident rates were higher in those employees who were younger, newly employed, and in production jobs. The findings of this research imply that accident prevention programmes should be directed to those factors known to relate to accidents and not to any specific ethnic group. PMID:3828246

  7. Pilot-error accidents: male vs female.

    PubMed

    Vail, G J; Ekman, L G

    1986-12-01

    In this study, general aviation accident records from the files of the National Transportation Safety Board (NTSB), have been analysed by gender to observe the number and rate of pilot-error related accidents from 1972 to 1981 inclusive. If both females and males have no difference in performance, then data would have indicated similarities of accident rates and types of injuries. Males had a higher rate of accidents than females, and a higher portion of the male accidents resulted in fatalities or serious injuries than for females. Type of certificate, age, total flight time, flight time in type of aircraft, phase of operation, category of flying, degree of injury, specific cause factors, cause factor miscellaneous acts/conditions were analysed, taking the total number of United States Active Civilian General Aviation Pilots into consideration. The data did indicate a difference in all variables. PMID:15676598

  8. The Fukushima Daiichi Accident Study Information Portal

    SciTech Connect

    Shawn St. Germain; Curtis Smith; David Schwieder; Cherie Phelan

    2012-11-01

    This paper presents a description of The Fukushima Daiichi Accident Study Information Portal. The Information Portal was created by the Idaho National Laboratory as part of joint NRC and DOE project to assess the severe accident modeling capability of the MELCOR analysis code. The Fukushima Daiichi Accident Study Information Portal was created to collect, store, retrieve and validate information and data for use in reconstructing the Fukushima Daiichi accident. In addition to supporting the MELCOR simulations, the Portal will be the main DOE repository for all data, studies and reports related to the accident at the Fukushima Daiichi nuclear power station. The data is stored in a secured (password protected and encrypted) repository that is searchable and accessible to researchers at diverse locations.

  9. National registration of accidents in Iceland.

    PubMed

    Olafsson, O; Axelsson, J

    1992-01-01

    Community based registration of accidents has been employed in Iceland from 1987. A form developed in the emergency ward at the city Hospital of Reykjavik has been used for the registration. The following issues have been registered: the type and the seriousness of the injury, treatment, place of accident and time of accident. Health centres in Iceland have been computerized from 1976. At the time being about half of the health centres participate in the registration with the information included in the form as the source. Every health center has its well defined district. The accidents among the inhabitants in each district is registered, while accidents among other people, e.g. tourists, is registered separately. At this moment 183,000 out of a total number of 259,000 inhabitants are covered by the registration, i.e. 71% of the population. In 1989 the frequency of accidents was 198 per 100,000 inhabitants. 26% of the accidents occurred at home, 11% at work, 9% during physical activity, 6% was traffic accidents, whereas the same proportion occurred at school. This registration system has been created as a result of annual conferences on accidents arranged by the Director General of public health since 1984. Representatives for the following parties have been invited; medical doctors working in hospitals and health centres, clinical nurses, physiotherapists, the National Insurance Service, other insurance companies, rescue and ambulance personal, fire departments, the Automobile Association, the communication Council. Local communities members of the parliament, voluntary organizations, e.g. Red Cross, the Sea Rescue Service and the Aviation Board. This activity has stimulated measures aiming at preventing accidents in several local communities.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:1285816

  10. Columbia Accident Investigation Board Report. Volume Five

    NASA Technical Reports Server (NTRS)

    Gehmann, H. W.; Barry, J. L.; Deal, D. W.; Hallock, J. N.; Hess, K. W.

    2003-01-01

    Volume V of the Report contains appendices that were not cited in VolumeI. These consist of documents produced by NASA and other organizations, which were provided to the Columbia Accident Investigation Board in support of its inquiry into the February 1, 2003 destruction of the Space Shuttle Columbia The contents include:. Appendix G.1 Requirements and Procedures for Certification of Flight Readiness; Appendix G.2 Appendix R, Space Shuttle Program Contingency Action Plan; Appendix G.3 CAIB Charter, with Revisions; Appendix G.4 Group 1 Matrix Brief on Maintenance, Material, and Management; Appendix G.5 Vehicle Data Mapping(VDM) Team Final Report, Jun 13, 2003; Appendix G.6 SRB Working Group Presentation to CAIB; Appendix G. 7 Starfire Team Final Report, Jun 3, 2003; Appendix G.8 Using the Data and Observations from Flight STS-107, Executive Summary; Appendix G.9 Contracts, Incentives, and Safety/Technical Excellence; Appendix G.10 Detailed Summaries: Rogers Commission Report, ASAP Report, SIAT Report; Appendix G.11 Foam Application and Production Chart; Appendix G.12 Crew Survivability Report; and Appendix G.12 Aero/Aerothermal/ Thermal/Structures Team FinalReport, August 6, 2003.

  11. Analysis of containment venting at the Peach Bottom Atomic Power Station

    SciTech Connect

    Hanson, D.J.; Blackman, H.S.; Nelson, W.R.; Wright, R.E.; Leonard, M.T.; DiSalvo, R.

    1986-10-24

    An analysis of the extent to which containment venting would be effective in preventing or mitigating the consequences of severe accidents has been completed for the Peach Bottom Atomic Power Station, Units 2 and 3 (BWR-4s with Mark I containments). The analysis indicates that the effectiveness of venting in preventing containment overpressurization highly depends on the sequence of the severe accident. Containment venting can be effective for several classes of sequences, including transients with failure of long-term decay heat removal and loss-of-coolant accidents with breaks inside the containment. However, based on draft procedures and equipment in place at the time of the evaluation, containment venting has limited potential for further reducing the risk associated with three severe accident sequences currently identified as important risk contributors at Peach Bottom. Means of improving the potential for risk reduction is identified, but their influence on risk is not analyzed.

  12. The Fukushima accident was preventable.

    PubMed

    Synolakis, Costas; Kânoğlu, Utku

    2015-10-28

    The 11 March 2011 tsunami was probably the fourth largest in the past 100 years and killed over 15 000 people. The magnitude of the design tsunami triggering earthquake affecting this region of Japan had been grossly underestimated, and the tsunami hit the Fukushima Dai-ichi nuclear power plant (NPP), causing the third most severe accident in an NPP ever. Interestingly, while the Onagawa NPP was also hit by a tsunami of approximately the same height as Dai-ichi, it survived the event 'remarkably undamaged'. We explain what has been referred to as the cascade of engineering and regulatory failures that led to the Fukushima disaster. One, insufficient attention had been given to evidence of large tsunamis inundating the region earlier, to Japanese research suggestive that large earthquakes could occur anywhere along a subduction zone, and to new research on mega-thrusts since Boxing Day 2004. Two, there were unexplainably different design conditions for NPPs at close distances from each other. Three, the hazard analysis to calculate the maximum probable tsunami at Dai-ichi appeared to have had methodological mistakes, which almost nobody experienced in tsunami engineering would have made. Four, there were substantial inadequacies in the Japan nuclear regulatory structure. The Fukushima accident was preventable, if international best practices and standards had been followed, if there had been international reviews, and had common sense prevailed in the interpretation of pre-existing geological and hydrodynamic findings. Formal standards are needed for evaluating the tsunami vulnerability of NPPs, for specific training of engineers and scientists who perform tsunami computations for emergency preparedness or critical facilities, as well as for regulators who review safety studies. PMID:26392611

  13. Analysis of PWR RCS Injection Strategy During Severe Accident

    SciTech Connect

    Wang, S.-J.; Chiang, K.-S.; Chiang, S.-C.

    2004-05-15

    Reactor coolant system (RCS) injection is an important strategy for severe accident management of a pressurized water reactor (PWR) system. Maanshan is a typical Westinghouse PWR nuclear power plant (NPP) with large, dry containment. The severe accident management guideline (SAMG) of Maanshan NPP is developed based on the Westinghouse Owners Group (WOG) SAMG.The purpose of this work is to analyze the RCS injection strategy of PWR system in an overheated core condition. Power is assumed recovered as the vessel water level drops to the bottom of active fuel. The Modular Accident Analysis Program version 4.0.4 (MAAP4) code is chosen as a tool for analysis. A postulated station blackout sequence for Maanshan NPP is cited as a reference case for this analysis. The hot leg creep rupture occurs during the mitigation action with immediate injection after power recovery according to WOG SAMG, which is not desired. This phenomenon is not considered while developing the WOG SAMG. Two other RCS injection methods are analyzed by using MAAP4. The RCS injection strategy is modified in the Maanshan SAMG. These results can be applied for typical PWR NPPs.

  14. Accident sequence precursor analysis level 2/3 model development

    SciTech Connect

    Lui, C.H.; Galyean, W.J.; Brownson, D.A.

    1997-02-01

    The US Nuclear Regulatory Commission`s Accident Sequence Precursor (ASP) program currently uses simple Level 1 models to assess the conditional core damage probability for operational events occurring in commercial nuclear power plants (NPP). Since not all accident sequences leading to core damage will result in the same radiological consequences, it is necessary to develop simple Level 2/3 models that can be used to analyze the response of the NPP containment structure in the context of a core damage accident, estimate the magnitude of the resulting radioactive releases to the environment, and calculate the consequences associated with these releases. The simple Level 2/3 model development work was initiated in 1995, and several prototype models have been completed. Once developed, these simple Level 2/3 models are linked to the simple Level 1 models to provide risk perspectives for operational events. This paper describes the methods implemented for the development of these simple Level 2/3 ASP models, and the linkage process to the existing Level 1 models.

  15. Advanced accident sequence precursor analysis level 2 models

    SciTech Connect

    Galyean, W.J.; Brownson, D.A.; Rempe, J.L.

    1996-03-01

    The U.S. Nuclear Regulatory Commission Accident Sequence Precursor program pursues the ultimate objective of performing risk significant evaluations on operational events (precursors) occurring in commercial nuclear power plants. To achieve this objective, the Office of Nuclear Regulatory Research is supporting the development of simple probabilistic risk assessment models for all commercial nuclear power plants (NPP) in the U.S. Presently, only simple Level 1 plant models have been developed which estimate core damage frequencies. In order to provide a true risk perspective, the consequences associated with postulated core damage accidents also need to be considered. With the objective of performing risk evaluations in an integrated and consistent manner, a linked event tree approach which propagates the front end results to back end was developed. This approach utilizes simple plant models that analyze the response of the NPP containment structure in the context of a core damage accident, estimate the magnitude and timing of a radioactive release to the environment, and calculate the consequences for a given release. Detailed models and results from previous studies, such as the NUREG-1150 study, are used to quantify these simple models. These simple models are then linked to the existing Level 1 models, and are evaluated using the SAPHIRE code. To demonstrate the approach, prototypic models have been developed for a boiling water reactor, Peach Bottom, and a pressurized water reactor, Zion.

  16. Integrity of PWR pressure vessels during overcooling accidents

    SciTech Connect

    Cheverton, R.D.; Iskander, S.K.; Whitman, G.D.

    1982-01-01

    The reactor pressure vessel in a pressurized water reactor is normally subjected to temperatures and pressures that preclude propagation of sharp, crack-like defects that might exist in the wall of the vessel. However, there is a class of postulated accidents, referred to as overcooling accidents, that can subject the pressure vessel to severe thermal shock while the pressure is substantial. As a result of such accidents, vessels containing high concentrations of copper and nickel, which enhance radiation embrittlement, may possess a potential for extensive propagation of preexistent inner surface flaws prior to the vessel's normal end of life. A state-of-the-art fracture-mechanics model was developed and has been used for conducting parametric analyses and for calculating several recorded PWR transients. Results of the latter analysis indicate that there may be some vessels that have a potential for failure in a few years if subjected to a Rancho Seco-type transient. However, the calculational model may be excessively conservative, and this possibility is under investigation.

  17. Integrity of PWR pressure vessels during overcooling accidents

    SciTech Connect

    Cheverton, R.D.; Iskander, S.K.; Whitman, G.D.

    1982-01-01

    The reactor pressure vessel in a pressurized water reactor is normally subjected to temperatures and pressures that preclude propagation of sharp, crack-like defects that might exist in the wall of the vessel. However, there is a class of postulated accidents, referred to as overcooling accidents, that can subject the pressure vessel to severe thermal shock while the pressure is substantial. As a result of such accidents vessels containing high concentrations of copper and nickel, which enhance radiation embrittlement, may possess a potential for extensive propagation of preexistent inner surface flaws prior to the vessel's normal end of life. For the purpose of evaluating this problem a state-of-the-art fracture mechanics model was developed and has been used for conducting parametric analyses and for calculating several recorded PWR transients. Results of the latter analysis indicate that there may be some vessels that have a potential for failure today if subjected to a Rancho Seco (1978) or TMI-2 (1979) type transient. However, the calculational model may be excessively conservative, and this possibility is under investigation.

  18. Database structure for the Laser Accident and Incident Registry (LAIR)

    NASA Astrophysics Data System (ADS)

    Ness, James W.; Hoxie, Stephen W.; Zwick, Harry; Stuck, Bruce E.; Lund, David J.; Schmeisser, Elmar T.

    1997-05-01

    The ubiquity of laser radiation in military, medical, entertainment, telecommunications and research industries and the significant risk, of eye injury from this radiation are firmly established. While important advances have been made in understanding laser bioeffects using animal analogues and clinical data, the relationships among patient characteristics, exposure conditions, severity of the resulting injury, and visual function are fragmented, complex and varied. Although accident cases are minimized through laser safety regulations and control procedures, accumulated accident case information by the laser eye injury evaluation center warranted the development of a laser accident and incident registry. The registry includes clinical data for validating and refining hypotheses on injury and recovery mechanisms; a means for analyzing mechanisms unique to human injury; and a means for identifying future areas of investigation. The relational database supports three major sections: (1) the physics section defines exposure circumstances, (2) the clinical/ophthalmologic section includes fundus and scanning laser ophthalmoscope images, and (3) the visual functions section contains specialized visual function exam results. Tools are available for subject-matter experts to estimate parameters like total intraocular energy, ophthalmic lesion grade, and exposure probability. The database is research oriented to provide a means for generating empirical relationships to identify symptoms for definitive diagnosis and treatment of laser induced eye injuries.

  19. Defense High Level Waste Disposal Container System Description

    SciTech Connect

    2000-10-12

    The Defense High Level Waste Disposal Container System supports the confinement and isolation of waste within the Engineered Barrier System of the Monitored Geologic Repository (MGR). Disposal containers are loaded and sealed in the surface waste handling facilities, transferred to the underground through the accesses using a rail mounted transporter, and emplaced in emplacement drifts. The defense high level waste (HLW) disposal container provides long-term confinement of the commercial HLW and defense HLW (including immobilized plutonium waste forms (IPWF)) placed within disposable canisters, and withstands the loading, transfer, emplacement, and retrieval loads and environments. U.S. Department of Energy (DOE)-owned spent nuclear fuel (SNF) in disposable canisters may also be placed in a defense HLW disposal container along with commercial HLW waste forms, which is known as 'co-disposal'. The Defense High Level Waste Disposal Container System provides containment of waste for a designated period of time, and limits radionuclide release. The disposal container/waste package maintains the waste in a designated configuration, withstands maximum handling and rockfall loads, limits the individual canister temperatures after emplacement, resists corrosion in the expected handling and repository environments, and provides containment of waste in the event of an accident. Defense HLW disposal containers for HLW disposal will hold up to five HLW canisters. Defense HLW disposal containers for co-disposal will hold up to five HLW canisters arranged in a ring and one DOE SNF canister in the ring. Defense HLW disposal containers also will hold two Multi-Canister Overpacks (MCOs) and two HLW canisters in one disposal container. The disposal container will include outer and inner cylinders, outer and inner cylinder lids, and may include a canister guide. An exterior label will provide a means by which to identify the disposal container and its contents. Different materials

  20. Extension of ship accident analysis to multiple-package shipments

    SciTech Connect

    Mills, G.S.; Neuhauser, K.S.

    1997-11-01

    Severe ship accidents and the probability of radioactive material release from spent reactor fuel casks were investigated previously. Other forms of RAM, e.g., plutonium oxide powder, may be shipped in large numbers of packagings rather than in one to a few casks. These smaller, more numerous packagings are typically placed in ISO containers for ease of handling, and several ISO containers may be placed in one of several holds of a cargo ship. In such cases, the size of a radioactive release resulting from a severe collision with another ship is determined not by the likelihood of compromising a single, robust package but by the probability that a certain fraction of 10`s or 100`s of individual packagings is compromised. The previous analysis involved a statistical estimation of the frequency of accidents which would result in damage to a cask located in one of seven cargo holds in a collision with another ship. The results were obtained in the form of probabilities (frequencies) of accidents of increasing severity and of release fractions for each level of severity. This paper describes an extension of the same general method in which the multiple packages are assumed to be compacted by an intruding ship`s bow until there is no free space in the hold. At such a point, the remaining energy of the colliding ship is assumed to be dissipated by progressively crushing the RAM packagings and the probability of a particular fraction of package failures is estimated by adaptation of the statistical method used previously. The parameters of a common, well characterized packaging, the 6M with 2R inner containment vessel, were employed as an illustrative example of this analysis method. However, the method is readily applicable to other packagings for which crush strengths have been measured or can be estimated with satisfactory confidence.