10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

Validity and consistency assessment of accident analysis methods in the petroleum industry.

PubMed

Ahmadi, Omran; Mortazavi, Seyed Bagher; Khavanin, Ali; Mokarami, Hamidreza

2017-11-17

Accident analysis is the main aspect of accident investigation. It includes the method of connecting different causes in a procedural way. Therefore, it is important to use valid and reliable methods for the investigation of different causal factors of accidents, especially the noteworthy ones. This study aimed to prominently assess the accuracy (sensitivity index [SI]) and consistency of the six most commonly used accident analysis methods in the petroleum industry. In order to evaluate the methods of accident analysis, two real case studies (process safety and personal accident) from the petroleum industry were analyzed by 10 assessors. The accuracy and consistency of these methods were then evaluated. The assessors were trained in the workshop of accident analysis methods. The systematic cause analysis technique and bowtie methods gained the greatest SI scores for both personal and process safety accidents, respectively. The best average results of the consistency in a single method (based on 10 independent assessors) were in the region of 70%. This study confirmed that the application of methods with pre-defined causes and a logic tree could enhance the sensitivity and consistency of accident analysis.

Accidents at work and costs analysis: a field study in a large Italian company.

PubMed

Battaglia, Massimo; Frey, Marco; Passetti, Emilio

2014-01-01

Accidents at work are still a heavy burden in social and economic terms, and action to improve health and safety standards at work offers great potential gains not only to employers, but also to individuals and society as a whole. However, companies often are not interested to measure the costs of accidents even if cost information may facilitate preventive occupational health and safety management initiatives. The field study, carried out in a large Italian company, illustrates technical and organisational aspects associated with the implementation of an accident costs analysis tool. The results indicate that the implementation (and the use) of the tool requires a considerable commitment by the company, that accident costs analysis should serve to reinforce the importance of health and safety prevention and that the economic dimension of accidents is substantial. The study also suggests practical ways to facilitate the implementation and the moral acceptance of the accounting technology.

Accidents at Work and Costs Analysis: A Field Study in a Large Italian Company

PubMed Central

BATTAGLIA, Massimo; FREY, Marco; PASSETTI, Emilio

2014-01-01

Accidents at work are still a heavy burden in social and economic terms, and action to improve health and safety standards at work offers great potential gains not only to employers, but also to individuals and society as a whole. However, companies often are not interested to measure the costs of accidents even if cost information may facilitate preventive occupational health and safety management initiatives. The field study, carried out in a large Italian company, illustrates technical and organisational aspects associated with the implementation of an accident costs analysis tool. The results indicate that the implementation (and the use) of the tool requires a considerable commitment by the company, that accident costs analysis should serve to reinforce the importance of health and safety prevention and that the economic dimension of accidents is substantial. The study also suggests practical ways to facilitate the implementation and the moral acceptance of the accounting technology. PMID:24869894

A multi-agent safety response model in the construction industry.

PubMed

Meliá, José L

2015-01-01

The construction industry is one of the sectors with the highest accident rates and the most serious accidents. A multi-agent safety response approach allows a useful diagnostic tool in order to understand factors affecting risk and accidents. The special features of the construction sector can influence the relationships among safety responses along the model of safety influences. The purpose of this paper is to test a model explaining risk and work-related accidents in the construction industry as a result of the safety responses of the organization, the supervisors, the co-workers and the worker. 374 construction employees belonging to 64 small Spanish construction companies working for two main companies participated in the study. Safety responses were measured using a 45-item Likert-type questionnaire. The structure of the measure was analyzed using factor analysis and the model of effects was tested using a structural equation model. Factor analysis clearly identifies the multi-agent safety dimensions hypothesized. The proposed safety response model of work-related accidents, involving construction specific results, showed a good fit. The multi-agent safety response approach to safety climate is a useful framework for the assessment of organizational and behavioral risks in construction.

Assessing the safety effects of cooperative intelligent transport systems: A bowtie analysis approach.

PubMed

Ehlers, Ute Christine; Ryeng, Eirin Olaussen; McCormack, Edward; Khan, Faisal; Ehlers, Sören

2017-02-01

The safety effects of cooperative intelligent transport systems (C-ITS) are mostly unknown and associated with uncertainties, because these systems represent emerging technology. This study proposes a bowtie analysis as a conceptual framework for evaluating the safety effect of cooperative intelligent transport systems. These seek to prevent road traffic accidents or mitigate their consequences. Under the assumption of the potential occurrence of a particular single vehicle accident, three case studies demonstrate the application of the bowtie analysis approach in road traffic safety. The approach utilizes exemplary expert estimates and knowledge from literature on the probability of the occurrence of accident risk factors and of the success of safety measures. Fuzzy set theory is applied to handle uncertainty in expert knowledge. Based on this approach, a useful tool is developed to estimate the effects of safety-related cooperative intelligent transport systems in terms of the expected change in accident occurrence and consequence probability. Copyright © 2016 Elsevier Ltd. All rights reserved.

Circuit board accident--organizational dimension hidden by prescribed safety.

PubMed

de Almeida, Ildeberto Muniz; Buoso, Eduardo; do Amaral Dias, Maria Dionísia; Vilela, Rodolfo Andrade Gouveia

2012-01-01

This study analyzes an accident in which two maintenance workers suffered severe burns while replacing a circuit breaker panel in a steel mill, following model of analysis and prevention of accidents (MAPA) developed with the objective of enlarging the perimeter of interventions and contributing to deconstruction of blame attribution practices. The study was based on materials produced by a health service team in an in-depth analysis of the accident. The analysis shows that decisions related to system modernization were taken without considering their implications in maintenance scheduling and creating conflicts of priorities and of interests between production and safety; and also reveals that the lack of a systemic perspective in safety management was its principal failure. To explain the accident as merely non-fulfillment of idealized formal safety rules feeds practices of blame attribution supported by alibi norms and inhibits possible prevention. In contrast, accident analyses undertaken in worker health surveillance services show potential to reveal origins of these events incubated in the history of the system ignored in practices guided by the traditional paradigm.

Analysis of Two Electrocution Accidents in Greece that Occurred due to Unexpected Re-energization of Power Lines

PubMed Central

Baka, Aikaterini D.; Uzunoglu, Nikolaos K.

2014-01-01

Investigation and analysis of accidents are critical elements of safety management. The over-riding purpose of an organization in carrying out an accident investigation is to prevent similar accidents, as well as seek a general improvement in the management of health and safety. Hundreds of workers have suffered injuries while installing, maintaining, or servicing machinery and equipment due to sudden re-energization of power lines. This study presents and analyzes two electrical accidents (1 fatal injury and 1 serious injury) that occurred because the power supply was reconnected inadvertently or by mistake. PMID:25379331

Analysis of Two Electrocution Accidents in Greece that Occurred due to Unexpected Re-energization of Power Lines.

PubMed

Baka, Aikaterini D; Uzunoglu, Nikolaos K

2014-09-01

Investigation and analysis of accidents are critical elements of safety management. The over-riding purpose of an organization in carrying out an accident investigation is to prevent similar accidents, as well as seek a general improvement in the management of health and safety. Hundreds of workers have suffered injuries while installing, maintaining, or servicing machinery and equipment due to sudden re-energization of power lines. This study presents and analyzes two electrical accidents (1 fatal injury and 1 serious injury) that occurred because the power supply was reconnected inadvertently or by mistake.

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2: Accident Model Document (AMD)

NASA Technical Reports Server (NTRS)

1972-01-01

The Accident Model Document is one of three documents of the Preliminary Safety Analysis Report (PSAR) - Reactor System as applied to a Space Base Program. Potential terrestrial nuclear hazards involving the zirconium hydride reactor-Brayton power module are identified for all phases of the Space Base program. The accidents/events that give rise to the hazards are defined and abort sequence trees are developed to determine the sequence of events leading to the hazard and the associated probabilities of occurence. Source terms are calculated to determine the magnitude of the hazards. The above data is used in the mission accident analysis to determine the most probable and significant accidents/events in each mission phase. The only significant hazards during the prelaunch and launch ascent phases of the mission are those which arise form criticality accidents. Fission product inventories during this time period were found to be very low due to very limited low power acceptance testing.

Rotorcraft Drivetrain Life Safety and Reliability (Cycle de Vie, Securite et Fiabilite des Chaines Dynamiques des Avions a Voilure Tournante)

DTIC Science & Technology

1990-06-01

design and component technologies are reviewed against a background of accident data analysis , resulting in grounds for confidence in higher safety levels...constructors or operators taking voluntary actions based on accident investigations and their own data . Analysis of the CAA Summaty data (Appendix 3...of engines. In the accident data analysis in Appendix 3, insufficient data was available to determine whether rotor configuration or associated

A Qualitative Study on Organizational Factors Affecting Occupational Accidents

PubMed Central

ESKANDARI, Davood; JAFARI, Mohammad Javad; MEHRABI, Yadollah; KIAN, Mostafa Pouya; CHARKHAND, Hossein; MIRGHOTBI, Mostafa

2017-01-01

Background: Technical, human, operational and organizational factors have been influencing the sequence of occupational accidents. Among them, organizational factors play a major role in causing occupational accidents. The aim of this research was to understand the Iranian safety experts’ experiences and perception of organizational factors. Methods: This qualitative study was conducted in 2015 by using the content analysis technique. Data were collected through semi-structured interviews with 17 safety experts working in Iranian universities and industries and analyzed with a conventional qualitative content analysis method using the MAXQDA software. Results: Eleven organizational factors’ sub-themes were identified: management commitment, management participation, employee involvement, communication, blame culture, education and training, job satisfaction, interpersonal relationship, supervision, continuous improvement, and reward system. The participants considered these factors as effective on occupational accidents. Conclusion: The mentioned 11 organizational factors are probably involved in occupational accidents in Iran. Naturally, improving organizational factors can increase the safety performance and reduce occupational accidents. PMID:28435824

A Qualitative Study on Organizational Factors Affecting Occupational Accidents.

PubMed

Eskandari, Davood; Jafari, Mohammad Javad; Mehrabi, Yadollah; Kian, Mostafa Pouya; Charkhand, Hossein; Mirghotbi, Mostafa

2017-03-01

Technical, human, operational and organizational factors have been influencing the sequence of occupational accidents. Among them, organizational factors play a major role in causing occupational accidents. The aim of this research was to understand the Iranian safety experts' experiences and perception of organizational factors. This qualitative study was conducted in 2015 by using the content analysis technique. Data were collected through semi-structured interviews with 17 safety experts working in Iranian universities and industries and analyzed with a conventional qualitative content analysis method using the MAXQDA software. Eleven organizational factors' sub-themes were identified: management commitment, management participation, employee involvement, communication, blame culture, education and training, job satisfaction, interpersonal relationship, supervision, continuous improvement, and reward system. The participants considered these factors as effective on occupational accidents. The mentioned 11 organizational factors are probably involved in occupational accidents in Iran. Naturally, improving organizational factors can increase the safety performance and reduce occupational accidents.

An Analysis of U.S. Civil Rotorcraft Accidents by Cost and Injury (1990-1996)

NASA Technical Reports Server (NTRS)

Iseler, Laura; DeMaio, Joe; Rutkowski, Michael (Technical Monitor)

2002-01-01

A study of rotorcraft accidents was conducted to identify safety issues and research areas that might lead to a reduction in rotorcraft accidents and fatalities. The primary source of data was summaries of National Transportation Safety Board (NTSB) accident reports. From 1990 to 1996, the NTSB documented 1396 civil rotorcraft accidents in the United States in which 491 people were killed. The rotorcraft data were compared to airline and general aviation data to determine the relative safety of rotorcraft compared to other segments of the aviation industry. In depth analysis of the rotorcraft data addressed demographics, mission, and operational factors. Rotorcraft were found to have an accident rate about ten times that of commercial airliners and about the same as that of general aviation. The likelihood that an accident would be fatal was about equal for all three classes of operation. The most dramatic division in rotorcraft accidents is between flights flown by private pilots versus professional pilots. Private pilots, flying low cost aircraft in benign environments, have accidents that are due, in large part, to their own errors. Professional pilots, in contrast, are more likely to have accidents that are a result of exacting missions or use of specialized equipment. For both groups judgement error is more likely to lead to a fatal accident than are other types of causes. Several approaches to improving the rotorcraft accident rate are recommended. These mostly address improvement in the training of new pilots and improving the safety awareness of private pilots.

Civil helicopter wire strike assessment study. Volume 2: Accident analysis briefs

NASA Technical Reports Server (NTRS)

Tuomela, C. H.; Brennan, M. F.

1980-01-01

A description and analysis of each of the 208 civil helicopter wire strike accidents reported to the National Transportation Safety Board (NTSB) for the ten year period 1970-1979 is given. The accident analysis briefs were based on pilot reports, FAA investigation reports, and such accident photographs as were made available. Briefs were grouped by year and, within year, by NTSB accident report number.

Unions, Health and Safety Committees, and Workplace Accidents in the Korean Manufacturing Sector.

PubMed

Kim, Woo-Yung; Cho, Hm-Hak

2016-06-01

Despite the declining trend of workplace accidents in Republic of Korea, its level is still quite high compared with that in other developed countries. Factors that are responsible for high workplace accidents have not been well documented in Republic of Korea. The main purpose of this paper is to estimate the effects of unions and health and safety committees on workplace accidents in Korean manufacturing firms. We also allow for the interactions between unions and health and safety committees in the analysis. The results obtained in this paper will not only contribute to the literature in this field, but might also be useful for employers and worker representatives who are trying to find an effective way to reduce workplace accidents. This paper utilizes the 2012 Occupational Safety and Health Trend Survey data, which is a unique data set providing information on workplace injuries and illness as well as other characteristics of participatory firms, representative of the manufacturing industry in Republic of Korea. In estimating the effects of unions and health and safety committees, we build a negative binomial regression model in which the interactions between unions and health and safety committees are permissible in reducing workplace accidents. Health and safety committees were found to reduce the incidence of accidents whereas unionized establishments have higher incidence of accidents than nonunionized establishments. We also found that health and safety committees can more effectively reduce accidents in nonunionized establishments. By contrast, nonexclusive joint committees can more effectively reduce accidents in unionized establishments.

Analysis of construction accidents in Spain, 2003-2008.

PubMed

López Arquillos, Antonio; Rubio Romero, Juan Carlos; Gibb, Alistair

2012-12-01

The research objective for this paper is to obtain a new extended and updated insight to the likely causes of construction accidents in Spain, in order to identify suitable mitigating actions. The paper analyzes all construction sector accidents in Spain between 2003 and 2008. Ten variables were chosen and the influence of each variable is evaluated with respect to the severity of the accident. The descriptive analysis is based on a total of 1,163,178 accidents. Results showed that the severity of accidents was related to variables including age, CNAE (National Classification of Economic Activities) code, size of company, length of service, location of accident, day of the week, days of absence, deviation, injury, and climatic zones. According to data analyzed, a large company is not always necessarily safer than a small company in the aspect of fatal accidents, experienced workers do not have the best accident fatality rates, and accidents occurring away from the usual workplace had more severe consequences. Results obtained in this paper can be used by companies in their occupational safety strategies, and in their safety training programs. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Is "Safety-in-numbers" theory applies to the pattern of pedestrian accidents in Seoul, South Korea.

NASA Astrophysics Data System (ADS)

Choi, Y.; Yoon, H.

2016-12-01

Every year, about 1.25 million people die of vehicle-related accidents, among which half are pedestrians with higher vulnerability: pedestrian, cyclists and motorcyclist (World Health Organization, 2016). This urges city governments in the world to strive for pedestrian safety and to apply diverse theories to transportation planning and design. The common belief is that the number of pedestrian accidents is directly and positively associated with the volume of pedestrian, however, another hypothesis, called "safety-in-numbers" effect, tells an opposite story in that accident rates declines with increase of the volume of pedestrian. In this study, we examine first, whether the safety-in-numbers theory applies to the pattern of pedestrian accidents in Seoul, and second, further investigate environmental factors that are associated with the pedestrian safety. On the first count, we use geospatial statistical analyses of the multi-year pedestrian accident data collected by Korea Road Traffic Authority (KoRoad) and the pedestrian volume data collected by SK Telecom (SKT). With Kernel Density Estimation and Bivariate Local Moran's I, we identify spatial clustering of pedestrian accidents in the city, and examine whether those locations match with concentrations of pedestrian volume. On the second count, we use statistical analysis, tobit, poisson and negative binomial regression to investigate relationships between pedestrian volume and number of pedestrian accident for the two types of geographic areas by the results of the aforementioned analysis; Area 1- locations of high volume of pedestrian with high number of accident, Area 2- locations of high volume of pedestrian with low number of accident. For environmental factors potentially explaining pedestrian accidents, we include land use composition, number of traffic lanes, crosswalk presence, pedestrian signal, traffic island and sidewalk width in our analysis. This research will be valuable in city governments' decision making with planning guidelines and political protocols for making safer pedestrian environment.

Commuter Train Passenger Safety Model Using Positive Behavior Approach: The Case Study in Suburban Area

NASA Astrophysics Data System (ADS)

Suryanto, D. A.; Adisasmita, S. A.; Hamid, S.; Hustim, M.

2018-04-01

Currently, Train passanger safety measures are more predominantly measurable using negative dimensions in user mode behavior, such as accident rate, accident intensity and accident impact. This condition suggests that safety improvements aim only to reduce accidents. Therefore, this study aims to measure the safety level of light train transit modes (KRL) through the dimensions of traveling safety on commuters based on positive safety indicators with severel condition departure times and returns for work purposes and long trip rates above KRL. The primary survey were used in data collection methods. Structural Equation Modeling (SEM) were used in data analysis. The results show that there are different models of the safety level of departure and return journey. The highest difference is in the security dimension which is the internal variable of KRL users.

Indonesian Sea Accident Analysis (Case Study From 2003 – 2013)

NASA Astrophysics Data System (ADS)

Arya Dewanto, Y.; Faturachman, D.

2018-03-01

There are so many accidents in sea transportation in Indonesia. Most of the accidents happen because of low concern aspects of the safety and security of the crew. In sailing, a man as transport users to interact with the ship and the surrounding environment (including other ships, cruise lines, ports, and the situation of local conditions). These interactions are sometimes very complex and related to various aspects of. Aware of the multiplicity of aspects related to the third of these factors, seeking the safety of cruise through a reduction in the number of accidents and the risk of death and serious injuries due to accidents and goods transported is certainly not enough attempted through mono-sector approach, but rather takes a multi-sector approach to the efforts. In this paper, we described the Indonesian Sea Transportation accident analysis for eleven years divided into four items: total of ship accident type, ship accident factor, total of casualties, region of ship accidents. All data founded from Marine Court (Mahkamah Pelayaran). From that 4 items we can find Indonesia Sea Accident Analysis from 2003-2013.

Type A Accident Investigation Board report on the January 17, 1996, electrical accident with injury in Technical Area 21 Tritium Science and Fabrication Facility Los Alamos National Laboratory. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-04-01

An electrical accident was investigated in which a crafts person received serious injuries as a result of coming into contact with a 13.2 kilovolt (kV) electrical cable in the basement of Building 209 in Technical Area 21 (TA-21-209) in the Tritium Science and Fabrication Facility (TSFF) at Los Alamos National Laboratory (LANL). In conducting its investigation, the Accident Investigation Board used various analytical techniques, including events and causal factor analysis, barrier analysis, change analysis, fault tree analysis, materials analysis, and root cause analysis. The board inspected the accident site, reviewed events surrounding the accident, conducted extensive interviews and document reviews,more » and performed causation analyses to determine the factors that contributed to the accident, including any management system deficiencies. Relevant management systems and factors that could have contributed to the accident were evaluated in accordance with the guiding principles of safety management identified by the Secretary of Energy in an October 1994 letter to the Defense Nuclear Facilities Safety Board and subsequently to Congress.« less

SCAP: a new methodology for safety management based on feedback from credible accident-probabilistic fault tree analysis system.

PubMed

Khan, F I; Iqbal, A; Ramesh, N; Abbasi, S A

2001-10-12

As it is conventionally done, strategies for incorporating accident--prevention measures in any hazardous chemical process industry are developed on the basis of input from risk assessment. However, the two steps-- risk assessment and hazard reduction (or safety) measures--are not linked interactively in the existing methodologies. This prevents a quantitative assessment of the impacts of safety measures on risk control. We have made an attempt to develop a methodology in which risk assessment steps are interactively linked with implementation of safety measures. The resultant system tells us the extent of reduction of risk by each successive safety measure. It also tells based on sophisticated maximum credible accident analysis (MCAA) and probabilistic fault tree analysis (PFTA) whether a given unit can ever be made 'safe'. The application of the methodology has been illustrated with a case study.

Safety training priorities

NASA Astrophysics Data System (ADS)

Thompson, N. A.; Ruck, H. W.

1984-04-01

The Air Force is interested in identifying potentially hazardous tasks and prevention of accidents. This effort proposes four methods for determining safety training priorities for job tasks in three enlisted specialties. These methods can be used to design training aimed at avoiding loss of people, time, materials, and money associated with on-the-job accidents. Job tasks performed by airmen were measured using task and job factor ratings. Combining accident reports and job inventories, subject-matter experts identified tasks associated with accidents over a 3-year period. Applying correlational, multiple regression, and cost-benefit analysis, four methods were developed for ordering hazardous tasks to determine safety training priorities.

Challenging the immediate causes: A work accident investigation in an oil refinery using organizational analysis.

PubMed

Beltran, Sandra Lorena; Vilela, Rodolfo Andrade de Gouveia; de Almeida, Ildeberto Muniz

2018-01-01

In many companies, investigations of accidents still blame the victims without exploring deeper causes. Those investigations are reactive and have no learning potential. This paper aims to debate the historical organizational aspects of a company whose policy was incubating an accident. The empirical data are analyzed as part of a qualitative study of an accident that occurred in an oil refinery in Brazil in 2014. To investigate and analyse this case we used one-to-one and group interviews, participant observation, Collective Analyses of Work and a documentary review. The analysis was conducted on the basis of concepts of the Organizational Analysis of the event and the Model for Analysis and Prevention of Work Accidents. The accident had its origin in the interaction of social and organizational factors, among them being: excessively standardized culture, management tools and outcome indicators that give a false sense of safety, the decision to speed up the project, the change of operator to facilitate this outcome and performance management that encourages getting around the usual barriers. The superficial accident analysis conducted by the company that ignored human and organizational factors reinforces the traditional safety culture and favors the occurrence of new accidents.

An Analysis of Laboratory Safety in Texas.

ERIC Educational Resources Information Center

Fuller, Edward J.; Picucci, Ali Callicoatte; Collins, James W.; Swann, Philip

This paper reports on a survey to discover the types of laboratory accidents that occur in Texas public schools, the factors associated with such accidents, and the practices of schools with regard to current laboratory safety requirements. The purpose of the survey is to better understand safety conditions in Texas public schools and to help…

Safety analysis report: A comparison of incidents from Safety Years 2006 through 2010, USDA Forest Service, Rocky Mountain Research Station Inventory and Monitoring Program

Treesearch

Devon Donahue

2012-01-01

This paper is an analysis of 5 years of accident data for the USDA Forest Service, Rocky Mountain Research Station (RMRS) Inventory and Monitoring (IM) Program that identifies past trends, allows for standardized self-comparison, and increases our understanding of the true costs of injuries and accidents. Measuring safety is a difficult task. While most agree that...

Bus accident analysis of routes with/without bus priority.

PubMed

Goh, Kelvin Chun Keong; Currie, Graham; Sarvi, Majid; Logan, David

2014-04-01

This paper summarises findings on road safety performance and bus-involved accidents in Melbourne along roads where bus priority measures had been applied. Results from an empirical analysis of the accident types revealed significant reduction in the proportion of accidents involving buses hitting stationary objects and vehicles, which suggests the effect of bus priority in addressing manoeuvrability issues for buses. A mixed-effects negative binomial (MENB) regression and back-propagation neural network (BPNN) modelling of bus accidents considering wider influences on accident rates at a route section level also revealed significant safety benefits when bus priority is provided. Sensitivity analyses done on the BPNN model showed general agreement in the predicted accident frequency between both models. The slightly better performance recorded by the MENB model results suggests merits in adopting a mixed effects modelling approach for accident count prediction in practice given its capability to account for unobserved location and time-specific factors. A major implication of this research is that bus priority in Melbourne's context acts to improve road safety and should be a major consideration for road management agencies when implementing bus priority and road schemes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Context-aware system for pre-triggering irreversible vehicle safety actuators.

PubMed

Böhmländer, Dennis; Dirndorfer, Tobias; Al-Bayatti, Ali H; Brandmeier, Thomas

2017-06-01

New vehicle safety systems have led to a steady improvement of road safety and a reduction in the risk of suffering a major injury in vehicle accidents. A huge leap forward in the development of new vehicle safety systems are actuators that have to be activated irreversibly shortly before a collision in order to mitigate accident consequences. The triggering decision has to be based on measurements of exteroceptive sensors currently used in driver assistance systems. This paper focuses on developing a novel context-aware system designed to detect potential collisions and to trigger safety actuators even before an accident occurs. In this context, the analysis examines the information that can be collected from exteroceptive sensors (pre-crash data) to predict a certain collision and its severity to decide whether a triggering is entitled or not. A five-layer context-aware architecture is presented, that is able to collect contextual information about the vehicle environment and the actual driving state using different sensors, to perform reasoning about potential collisions, and to trigger safety functions upon that information. Accident analysis is used in a data model to represent uncertain knowledge and to perform reasoning. A simulation concept based on real accident data is introduced to evaluate the presented system concept. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of roadside inspection data and its relationship to accident and safety/compliance review data and reviews of previous and ongoing research in these areas

DOT National Transportation Integrated Search

1993-01-01

The main objective of the present study is to analyze roadside inspection data and its relationship to safety/compliance review and accident data. Data used for this analysis is provided by the Office of Motor Carriers and includes a sample of larger...

A risk analysis of winter navigation in Finnish sea areas.

PubMed

Valdez Banda, Osiris A; Goerlandt, Floris; Montewka, Jakub; Kujala, Pentti

2015-06-01

Winter navigation is a complex but common operation in north-European sea areas. In Finnish waters, the smooth flow of maritime traffic and safety of vessel navigation during the winter period are managed through the Finnish-Swedish winter navigation system (FSWNS). This article focuses on accident risks in winter navigation operations, beginning with a brief outline of the FSWNS. The study analyses a hazard identification model of winter navigation and reviews accident data extracted from four winter periods. These are adopted as a basis for visualizing the risks in winter navigation operations. The results reveal that experts consider ship independent navigation in ice conditions the most complex navigational operation, which is confirmed by accident data analysis showing that the operation constitutes the type of navigation with the highest number of accidents reported. The severity of the accidents during winter navigation is mainly categorized as less serious. Collision is the most typical accident in ice navigation and general cargo the type of vessel most frequently involved in these accidents. Consolidated ice, ice ridges and ice thickness between 15 and 40cm represent the most common ice conditions in which accidents occur. Thus, the analysis presented in this article establishes the key elements for identifying the operation types which would benefit most from further safety engineering and safety or risk management development. Copyright © 2015 Elsevier Ltd. All rights reserved.

Single pilot IFR accident data analysis

NASA Technical Reports Server (NTRS)

Harris, D. F.

1983-01-01

The aircraft accident data recorded by the National Transportation and Safety Board (NTSR) for 1964-1979 were analyzed to determine what problems exist in the general aviation (GA) single pilot instrument flight rule (SPIFR) environment. A previous study conducted in 1978 for the years 1964-1975 provided a basis for comparison. This effort was generally limited to SPIFR pilot error landing phase accidents but includes some SPIFR takeoff and enroute accident analysis as well as some dual pilot IFR accident analysis for comparison. Analysis was performed for 554 accidents of which 39% (216) occurred during the years 1976-1979.

The Analysis of the Contribution of Human Factors to the In-Flight Loss of Control Accidents

NASA Technical Reports Server (NTRS)

Ancel, Ersin; Shih, Ann T.

2012-01-01

In-flight loss of control (LOC) is currently the leading cause of fatal accidents based on various commercial aircraft accident statistics. As the Next Generation Air Transportation System (NextGen) emerges, new contributing factors leading to LOC are anticipated. The NASA Aviation Safety Program (AvSP), along with other aviation agencies and communities are actively developing safety products to mitigate the LOC risk. This paper discusses the approach used to construct a generic integrated LOC accident framework (LOCAF) model based on a detailed review of LOC accidents over the past two decades. The LOCAF model is comprised of causal factors from the domain of human factors, aircraft system component failures, and atmospheric environment. The multiple interdependent causal factors are expressed in an Object-Oriented Bayesian belief network. In addition to predicting the likelihood of LOC accident occurrence, the system-level integrated LOCAF model is able to evaluate the impact of new safety technology products developed in AvSP. This provides valuable information to decision makers in strategizing NASA's aviation safety technology portfolio. The focus of this paper is on the analysis of human causal factors in the model, including the contributions from flight crew and maintenance workers. The Human Factors Analysis and Classification System (HFACS) taxonomy was used to develop human related causal factors. The preliminary results from the baseline LOCAF model are also presented.

Systems-based accident analysis in the led outdoor activity domain: application and evaluation of a risk management framework.

PubMed

Salmon, P; Williamson, A; Lenné, M; Mitsopoulos-Rubens, E; Rudin-Brown, C M

2010-08-01

Safety-compromising accidents occur regularly in the led outdoor activity domain. Formal accident analysis is an accepted means of understanding such events and improving safety. Despite this, there remains no universally accepted framework for collecting and analysing accident data in the led outdoor activity domain. This article presents an application of Rasmussen's risk management framework to the analysis of the Lyme Bay sea canoeing incident. This involved the development of an Accimap, the outputs of which were used to evaluate seven predictions made by the framework. The Accimap output was also compared to an analysis using an existing model from the led outdoor activity domain. In conclusion, the Accimap output was found to be more comprehensive and supported all seven of the risk management framework's predictions, suggesting that it shows promise as a theoretically underpinned approach for analysing, and learning from, accidents in the led outdoor activity domain. STATEMENT OF RELEVANCE: Accidents represent a significant problem within the led outdoor activity domain. This article presents an evaluation of a risk management framework that can be used to understand such accidents and to inform the development of accident countermeasures and mitigation strategies for the led outdoor activity domain.

Safety regulations, firm size, and the risk of accidents in E&P operations on the Gulf of Mexico outer continental shelf

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iledare, O.O.; Pulsipher, A.G.; Baumann, R.H.

1996-12-31

The current expanded role of smaller independent oil producers in the OCS has led to concern about the possibility of increased risk of accidents in E&P operations on the Gulf of Mexico OCS. In addition, questions have been posed concerning the effects of the Minerals Management Service`s (MMS) safety regulations and inspection program, firm size, and industry practices on the risk of accidents in E&P operations on the Gulf of Mexico OCS. The specific purposes of the study reported in this paper were to ascertain (1) whether any empirical justification exists for the widespread concern that an increase in independentsmore » relative share of E&P operations in the Gulf OCS region will be detrimental to safety, and (2) whether MMS policies and safety programs have reduced the frequency or severity of accidents on the OCS. Our statistical and descriptive analyses of data on accidents from MMS provide no statistical evidence to support the apprehension that an expanded role for independents in E&P activity constitutes any major threat to safety on the OCS. Further, the results of our econometrics analysis confirm the expectation that the more effective MMS inspectors are at detecting incidents of noncompliance the lower the rate of accidents on the OCS is, ceteris paribus. In addition the results indicate that the variability in platform exposure years--cumulative age of operating platform--in comparison to other factors explains a significant portion of the variation in accidents per operating platform. That is, the platform aging process provides more opportunity for accidents than any other contributing factors. Our econometrics analysis also suggests that, if the other factors contributing to offshore accidents are held constant, the responsiveness of accident rate to drilling activity is inelastic while the response of accident rate to production activity levels is elastic.« less

Worker safety and injury severity analysis of earthmoving equipment accidents.

PubMed

Kazan, Emrah; Usmen, Mumtaz A

2018-06-01

Research on construction worker safety associated with construction equipment has mostly focused on accident type rather than injury severity and the embedded factor relationships. Significant variables and their effects on the degree of injury are examined for earthmoving equipment using data from OSHA. Four types of equipment, backhoe, bulldozer, excavator, and scraper are included in the study. Accidents involving on-foot workers and equipment operators are investigated collectively, as well as separately. Cross tabulation analysis was conducted to establish the associations between selected categorical variables, using degree of injury as a dichotomous dependent variable (fatal vs. nonfatal) and a number of independent variables having different values. Odds ratios were calculated to determine how much a certain variable/factor increases the odds of fatality in an accident, and the odds ratios were ranked to determine the relative impact of a given factor. It was found that twelve variables were significantly associated with injury severity. Rankings based on odds ratios showed that inadequate safety training (2.54), missing equipment protective system (2.38), being a non-union worker (2.26), being an equipment operator (1.93), and being on or around inadequately maintained equipment (1.58) produced higher odds for fatality. A majority of the earthmoving equipment accidents resulted in fatality. Backhoes were the most common equipment involved in accidents and fatalities. Struck-by accidents were the most prevalent and most fatal. Non-OSHA compliant safety training, missing seatbelt, operator not using seatbelt, malfunctioning back-up alarms, and poorly maintained equipment were factors contributing to accidents and fatalities. On-foot workers experienced a higher number of accidents than operators, while fatality odds were higher for the operators. Practical applications: Safety professionals should benefit from our findings in planning and delivering training and providing oversight to workers in earthmoving equipment operations. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Another Approach to Enhance Airline Safety: Using Management Safety Tools

NASA Technical Reports Server (NTRS)

Lu, Chien-tsug; Wetmore, Michael; Przetak, Robert

2006-01-01

The ultimate goal of conducting an accident investigation is to prevent similar accidents from happening again and to make operations safer system-wide. Based on the findings extracted from the investigation, the "lesson learned" becomes a genuine part of the safety database making risk management available to safety analysts. The airline industry is no exception. In the US, the FAA has advocated the usage of the System Safety concept in enhancing safety since 2000. Yet, in today s usage of System Safety, the airline industry mainly focuses on risk management, which is a reactive process of the System Safety discipline. In order to extend the merit of System Safety and to prevent accidents beforehand, a specific System Safety tool needs to be applied; so a model of hazard prediction can be formed. To do so, the authors initiated this study by reviewing 189 final accident reports from the National Transportation Safety Board (NTSB) covering FAR Part 121 scheduled operations. The discovered accident causes (direct hazards) were categorized into 10 groups Flight Operations, Ground Crew, Turbulence, Maintenance, Foreign Object Damage (FOD), Flight Attendant, Air Traffic Control, Manufacturer, Passenger, and Federal Aviation Administration. These direct hazards were associated with 36 root factors prepared for an error-elimination model using Fault Tree Analysis (FTA), a leading tool for System Safety experts. An FTA block-diagram model was created, followed by a probability simulation of accidents. Five case studies and reports were provided in order to fully demonstrate the usefulness of System Safety tools in promoting airline safety.

Accidents of Electrical and Mechanical Works for Public Sector Projects in Hong Kong.

PubMed

Wong, Francis K W; Chan, Albert P C; Wong, Andy K D; Hon, Carol K H; Choi, Tracy N Y

2018-03-10

A study on electrical and mechanical (E&M) works-related accidents for public sector projects provided the opportunity to gain a better understanding of the causes of accidents by analyzing the circumstances of all E&M works accidents. The research aims to examine accidents of E&M works which happened in public sector projects. A total of 421 E&M works-related accidents in the "Public Works Programme Construction Site Safety and Environmental Statistics" (PCSES) system were extracted for analysis. Two-step cluster analysis was conducted to classify the E&M accidents into different groups. The results identified three E&M accidents groups: (1) electricians with over 15 years of experience were prone to 'fall of person from height'; (2) electricians with zero to five years of experience were prone to 'slip, trip or fall on same level'; (3) air-conditioning workers with zero to five years of experience were prone to multiple types of accidents. Practical measures were recommended for each specific cluster group to avoid recurrence of similar accidents. The accident analysis would be vital for industry practitioners to enhance the safety performance of public sector projects. This study contributes to filling the knowledge gap of how and why E&M accidents occur and promulgating preventive measures for E&M accidents which have been under researched.

Accidents of Electrical and Mechanical Works for Public Sector Projects in Hong Kong

PubMed Central

Wong, Francis K. W.; Chan, Albert P. C.; Wong, Andy K. D.; Choi, Tracy N. Y.

2018-01-01

A study on electrical and mechanical (E&M) works-related accidents for public sector projects provided the opportunity to gain a better understanding of the causes of accidents by analyzing the circumstances of all E&M works accidents. The research aims to examine accidents of E&M works which happened in public sector projects. A total of 421 E&M works-related accidents in the “Public Works Programme Construction Site Safety and Environmental Statistics” (PCSES) system were extracted for analysis. Two-step cluster analysis was conducted to classify the E&M accidents into different groups. The results identified three E&M accidents groups: (1) electricians with over 15 years of experience were prone to ‘fall of person from height’; (2) electricians with zero to five years of experience were prone to ‘slip, trip or fall on same level’; (3) air-conditioning workers with zero to five years of experience were prone to multiple types of accidents. Practical measures were recommended for each specific cluster group to avoid recurrence of similar accidents. The accident analysis would be vital for industry practitioners to enhance the safety performance of public sector projects. This study contributes to filling the knowledge gap of how and why E&M accidents occur and promulgating preventive measures for E&M accidents which have been under researched. PMID:29534429

Analysis of Child-related Road Traffic Accidents in Vietnam

NASA Astrophysics Data System (ADS)

Vu, Anh Tuan; Nguyen, Dinh Vinh Man

2018-04-01

In recent years, the number of road traffic accidents, fatalities and injuries have been decreasing, but the figures of children road traffic accidents have been increasing in Ho Chi Minh City of Vietnam. This fact strongly calls for implementing effective solutions to improve traffic safety for children by the local government. This paper presents the trends, patterns and causes of road traffic accidents involving children based on the analysis of road traffic accident data over the period 2010-2015 and the video-based observations of road traffic law violations at 15 typical school gates and 10 typical roads. The results could be useful for the city government to formulate solutions to effectively improve traffic safety for children in Ho Chi Minh City and other cities in Vietnam.

Hazard Identification and Risk Assessment of Health and Safety Approach JSA (Job Safety Analysis) in Plantation Company

NASA Astrophysics Data System (ADS)

Sugarindra, Muchamad; Ragil Suryoputro, Muhammad; Tiya Novitasari, Adi

2017-06-01

Plantation company needed to identify hazard and perform risk assessment as an Identification of Hazard and Risk Assessment Crime and Safety which was approached by using JSA (Job Safety Analysis). The identification was aimed to identify the potential hazards that might be the risk of workplace accidents so that preventive action could be taken to minimize the accidents. The data was collected by direct observation to the workers concerned and the results were recorded on a Job Safety Analysis form. The data were as forklift operator, macerator worker, worker’s creeper, shredder worker, workers’ workshop, mechanical line worker, trolley cleaning workers and workers’ crepe decline. The result showed that shredder worker value was 30 and had the working level with extreme risk with the risk value range was above 20. So to minimize the accidents could provide Personal Protective Equipment (PPE) which were appropriate, information about health and safety, the company should have watched the activities of workers, and rewards for the workers who obey the rules that applied in the plantation.

10 CFR 76.85 - Assessment of accidents.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Assessment of accidents. 76.85 Section 76.85 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.85 Assessment of accidents. The Corporation shall perform an analysis of potential accidents and consequences to...

10 CFR 76.85 - Assessment of accidents.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Assessment of accidents. 76.85 Section 76.85 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.85 Assessment of accidents. The Corporation shall perform an analysis of potential accidents and consequences to...

10 CFR 76.85 - Assessment of accidents.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Assessment of accidents. 76.85 Section 76.85 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.85 Assessment of accidents. The Corporation shall perform an analysis of potential accidents and consequences to...

10 CFR 76.85 - Assessment of accidents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Assessment of accidents. 76.85 Section 76.85 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.85 Assessment of accidents. The Corporation shall perform an analysis of potential accidents and consequences to...

10 CFR 76.85 - Assessment of accidents.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Assessment of accidents. 76.85 Section 76.85 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.85 Assessment of accidents. The Corporation shall perform an analysis of potential accidents and consequences to...

Final safety analysis report for the Galileo Mission: Volume 2, Book 2: Accident model document: Appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-12-15

This section of the Accident Model Document (AMD) presents the appendices which describe the various analyses that have been conducted for use in the Galileo Final Safety Analysis Report II, Volume II. Included in these appendices are the approaches, techniques, conditions and assumptions used in the development of the analytical models plus the detailed results of the analyses. Also included in these appendices are summaries of the accidents and their associated probabilities and environment models taken from the Shuttle Data Book (NSTS-08116), plus summaries of the several segments of the recent GPHS safety test program. The information presented in thesemore » appendices is used in Section 3.0 of the AMD to develop the Failure/Abort Sequence Trees (FASTs) and to determine the fuel releases (source terms) resulting from the potential Space Shuttle/IUS accidents throughout the missions.« less

A methodology for accident analysis of fusion breeder blankets and its application to helium-cooled lead–lithium blanket

DOE PAGES

Panayotov, Dobromir; Poitevin, Yves; Grief, Andrew; ...

2016-09-23

'Fusion for Energy' (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). Safety demonstration is an essential element for the integration of these TBSs into ITER and accident analysis is one of its critical components. A systematic approach to accident analysis has been developed under the F4E contract on TBS safety analyses. F4E technical requirements, together with Amec Foster Wheeler and INL efforts, have resulted in a comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials,more » and phenomena while remaining consistent with the approach already applied to ITER accident analyses. Furthermore, the methodology phases are illustrated in the paper by its application to the EU HCLL TBS using both MELCOR and RELAP5 codes.« less

A Historical Analysis of Crane Mishaps at Kennedy Space Center

NASA Technical Reports Server (NTRS)

Wolfe, Crystal

2014-01-01

Cranes and hoists are widely used in many areas. Crane accidents and handling mishaps are responsible for injuries, costly equipment damage, and program delays. Most crane accidents are caused by preventable factors. Understanding these factors is critical when designing cranes and preparing lift plans. Analysis of previous accidents provides insight into current recommendations for crane safety. Cranes and hoists are used throughout Kennedy Space Center to lift everything from machine components to critical flight hardware. Unless they are trained crane operators, most NASA employees and contractors do not need to undergo specialized crane training and may not understand the safety issues surrounding the use of cranes and hoists. A single accident with a crane or hoist can injure or kill people, cause severe equipment damage, and delay or terminate a program. Handling mishaps can also have a significant impact on the program. Simple mistakes like bouncing or jarring a load, or moving the crane down when it should go up, can damage fragile flight hardware and cause major delays in processing. Hazardous commodities (high pressure gas, hypergolic propellants, and solid rocket motors) can cause life safety concerns for the workers performing the lifting operations. Most crane accidents are preventable with the correct training and understanding of potential hazards. Designing the crane with human factors taken into account can prevent many accidents. Engineers are also responsible for preparing lift plans where understanding the safety issues can prevent or mitigate potential accidents. Cranes are widely used across many areas of KSC. Failure of these cranes often leads to injury, high damage costs, and significant delays in program objectives. Following a basic set of principles and procedures during design, fabrication, testing, regular use, and maintenance can significantly minimize many of these failures. As the accident analysis shows, load drops are often caused or influenced by human factors. Therefore, proper training and understanding of crane safety throughout the workforce is critical. It is important that the engineers designing the cranes, lift planners preparing the lift plans, operators performing the lifts, and training officers conducting the operator training all understand the problems that can happen with cranes and how to ensure the safety of the workforce and equipment being lifted.

An Examination of Safety Management Systems and Aviation Technologies in the Helicopter Emergency Medical Services Industry

NASA Astrophysics Data System (ADS)

Buckner, Steven A.

The Helicopter Emergency Medical Service (HEMS) industry has a significant role in the transportation of injured patients, but has experienced more accidents than all other segments of the aviation industry combined. With the objective of addressing this discrepancy, this study assesses the effect of safety management systems implementation and aviation technologies utilization on the reduction of HEMS accident rates. Participating were 147 pilots from Federal Aviation Regulations Part 135 HEMS operators, who completed a survey questionnaire based on the Safety Culture and Safety Management System Survey (SCSMSS). The study assessed the predictor value of SMS implementation and aviation technologies to the frequency of HEMS accident rates with correlation and multiple linear regression. The correlation analysis identified three significant positive relationships. HEMS years of experience had a high significant positive relationship with accident rate (r=.90; p<.05); SMS had a moderate significant positive relationship to Night Vision Goggles (NVG) (r=.38; p<.05); and SMS had a slight significant positive relationship with Terrain Avoidance Warning System (TAWS) (r=.234; p<.05). Multiple regression analysis suggested that when combined with NVG, TAWS, and SMS, HEMS years of experience explained 81.4% of the variance in accident rate scores (p<.05), and HEMS years of experience was found to be a significant predictor of accident rates (p<.05). Additional quantitative regression analysis was recommended to replicate the results of this study and to consider the influence of these variables for continued reduction of HEMS accidents, and to induce execution of SMS and aviation technologies from a systems engineering application. Recommendations for practice included the adoption of existing regulatory guidance for a SMS program. A qualitative analysis was also recommended for future study SMS implementation and HEMS accident rate from the pilot's perspective. A quantitative longitudinal study would further explore inferential relationships between the study variables. Current strategies should include the increased utilization of available aviation technology resources as this proactive stance may be beneficial for the establishment of an effective safety culture within the HEMS industry.

ARAMIS project: a more explicit demonstration of risk control through the use of bow-tie diagrams and the evaluation of safety barrier performance.

PubMed

de Dianous, Valérie; Fiévez, Cécile

2006-03-31

Over the last two decades a growing interest for risk analysis has been noted in the industries. The ARAMIS project has defined a methodology for risk assessment. This methodology has been built to help the industrialist to demonstrate that they have a sufficient risk control on their site. Risk analysis consists first in the identification of all the major accidents, assuming that safety functions in place are inefficient. This step of identification of the major accidents uses bow-tie diagrams. Secondly, the safety barriers really implemented on the site are taken into account. The barriers are identified on the bow-ties. An evaluation of their performance (response time, efficiency, and level of confidence) is performed to validate that they are relevant for the expected safety function. At last, the evaluation of their probability of failure enables to assess the frequency of occurrence of the accident. The demonstration of the risk control based on a couple gravity/frequency of occurrence is also possible for all the accident scenarios. During the risk analysis, a practical tool called risk graph is used to assess if the number and the reliability of the safety functions for a given cause are sufficient to reach a good risk control.

Safety distance assessment of industrial toxic releases based on frequency and consequence: a case study in Shanghai, China.

PubMed

Yu, Q; Zhang, Y; Wang, X; Ma, W C; Chen, L M

2009-09-15

A case study on the safety distance assessment of a chemical industry park in Shanghai, China, is presented in this paper. Toxic releases were taken into consideration. A safety criterion based on frequency and consequence of major hazard accidents was set up for consequence analysis. The exposure limits for the accidents with the frequency of more than 10(-4), 10(-5)-10(-4) and 10(-6)-10(-5) per year were mortalities of 1% (or SLOT), 50% (SLOD) and 75% (twice of SLOD) respectively. Accidents with the frequency of less than 10(-6) per year were considered incredible and ignored in the consequence analysis. Taking the safety distance of all the hazard installations in a chemical plant into consideration, the results based on the new criterion were almost smaller than those based on LC50 or SLOD. The combination of the consequence and risk based results indicated that the hazard installations in two of the chemical plants may be dangerous to the protection targets and measurements had to be taken to reduce the risk. The case study showed that taking account of the frequency of occurrence in the consequence analysis would give more feasible safety distances for major hazard accidents and the results were more comparable to those calculated by risk assessment.

Human error and commercial aviation accidents: an analysis using the human factors analysis and classification system.

PubMed

Shappell, Scott; Detwiler, Cristy; Holcomb, Kali; Hackworth, Carla; Boquet, Albert; Wiegmann, Douglas A

2007-04-01

The aim of this study was to extend previous examinations of aviation accidents to include specific aircrew, environmental, supervisory, and organizational factors associated with two types of commercial aviation (air carrier and commuter/ on-demand) accidents using the Human Factors Analysis and Classification System (HFACS). HFACS is a theoretically based tool for investigating and analyzing human error associated with accidents and incidents. Previous research has shown that HFACS can be reliably used to identify human factors trends associated with military and general aviation accidents. Using data obtained from both the National Transportation Safety Board and the Federal Aviation Administration, 6 pilot-raters classified aircrew, supervisory, organizational, and environmental causal factors associated with 1020 commercial aviation accidents that occurred over a 13-year period. The majority of accident causal factors were attributed to aircrew and the environment, with decidedly fewer associated with supervisory and organizational causes. Comparisons were made between HFACS causal categories and traditional situational variables such as visual conditions, injury severity, and regional differences. These data will provide support for the continuation, modification, and/or development of interventions aimed at commercial aviation safety. HFACS provides a tool for assessing human factors associated with accidents and incidents.

Towards a better reliability of risk assessment: development of a qualitative & quantitative risk evaluation model (Q2REM) for different trades of construction works in Hong Kong.

PubMed

Fung, Ivan W H; Lo, Tommy Y; Tung, Karen C F

2012-09-01

Since the safety professionals are the key decision makers dealing with project safety and risk assessment in the construction industry, their perceptions of safety risk would directly affect the reliability of risk assessment. The safety professionals generally tend to heavily rely on their own past experiences to make subjective decisions on risk assessment without systematic decision making. Indeed, understanding of the underlying principles of risk assessment is significant. In this study, the qualitative analysis on the safety professionals' beliefs of risk assessment and their perceptions towards risk assessment, including their recognitions of possible accident causes, the degree of differentiations on their perceptions of risk levels of different trades of works, recognitions of the occurrence of different types of accidents, and their inter-relationships with safety performance in terms of accident rates will be explored in the Stage 1. At the second stage, the deficiencies of the current general practice for risk assessment can be sorted out firstly. Based on the findings from Stage 1 and the historical accident data from 15 large-scaled construction projects in 3-year average, a risk evaluation model prioritizing the risk levels of different trades of works and which cause different types of site accident due to various accident causes will be developed quantitatively. With the suggested systematic accident recording techniques, this model can be implemented in the construction industry at both project level and organizational level. The model (Q(2)REM) not only act as a useful supplementary guideline of risk assessment for the construction safety professionals, but also assists them to pinpoint the potential risks on site for the construction workers under respective trades of works through safety trainings and education. It, in turn, arouses their awareness on safety risk. As the Q(2)REM can clearly show the potential accident causes leading to different types of accident by trade of works, it helps the concerned safety professionals and parties to plan effective accident prevention measures with reference to the priority of the risk levels. Copyright © 2011 Elsevier Ltd. All rights reserved.

The relationship between safety climate and recent accidents: behavioral learning and cognitive attributions.

PubMed

Desai, Vinit M; Roberts, Karlene H; Ciavarelli, Anthony P

2006-01-01

The association between accidents and subsequent work unit safety perceptions was assessed to address cognitive and behavioral changes following accidents. Many studies attempt to predict accident rates using measures of work unit safety, but effects vary considerably. Conversely, this study examined whether recent accidents may be positively associated with work unit safety perceptions, as suggested by behavioral learning mechanisms (increases in safety investments following accidents) or cognitive mechanisms (defensive attributions regarding accident causality). Lagged squadron-level accident experience was correlated with work unit safety perceptions obtained through a 61-question safety climate survey administered to 6,361 individuals in U.S. Navy flight squadrons. Positive associations between minor or intermediately severe accidents and future safety climate scores were found, although no effect was found for major accidents. We suggest that accident history should be considered when examining work unit safety perceptions because recent accidents may be associated with higher safety climate scores. We did not find that this varies systematically with accident severity, and longitudinal research on additional samples is needed to further test this possibility. This research may be used to refine measurement of work unit safety and to examine impacts of accidents or safety violations on workers' cognitive processes and group behavioral changes.

FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

KRIPPS, L.J.

2005-02-18

This document describes the qualitative evaluation of frequency and consequences for double shell tank (DST) and single shell tank (SST) representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant SSCs and/or TSRS were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the needmore » for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.« less

Canister Storage Building (CSB) Hazard Analysis Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

POWERS, T.B.

2000-03-16

This report describes the methodology used in conducting the Canister Storage Building (CSB) Hazard Analysis to support the final CSB Safety Analysis Report and documents the results. This report describes the methodology used in conducting the Canister Storage Building (CSB) hazard analysis to support the CSB final safety analysis report (FSAR) and documents the results. The hazard analysis process identified hazardous conditions and material-at-risk, determined causes for potential accidents, identified preventive and mitigative features, and qualitatively estimated the frequencies and consequences of specific occurrences. The hazard analysis was performed by a team of cognizant CSB operations and design personnel, safetymore » analysts familiar with the CSB, and technical experts in specialty areas. The material included in this report documents the final state of a nearly two-year long process. Attachment A provides two lists of hazard analysis team members and describes the background and experience of each. The first list is a complete list of the hazard analysis team members that have been involved over the two-year long process. The second list is a subset of the first list and consists of those hazard analysis team members that reviewed and agreed to the final hazard analysis documentation. The material included in this report documents the final state of a nearly two-year long process involving formal facilitated group sessions and independent hazard and accident analysis work. The hazard analysis process led to the selection of candidate accidents for further quantitative analysis. New information relative to the hazards, discovered during the accident analysis, was incorporated into the hazard analysis data in order to compile a complete profile of facility hazards. Through this process, the results of the hazard and accident analyses led directly to the identification of safety structures, systems, and components, technical safety requirements, and other controls required to protect the public, workers, and environment.« less

Loss of Coolant Accident (LOCA) / Emergency Core Coolant System (ECCS Evaluation of Risk-Informed Margins Management Strategies for a Representative Pressurized Water Reactor (PWR)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szilard, Ronaldo Henriques

A Risk Informed Safety Margin Characterization (RISMC) toolkit and methodology are proposed for investigating nuclear power plant core, fuels design and safety analysis, including postulated Loss-of-Coolant Accident (LOCA) analysis. This toolkit, under an integrated evaluation model framework, is name LOCA toolkit for the US (LOTUS). This demonstration includes coupled analysis of core design, fuel design, thermal hydraulics and systems analysis, using advanced risk analysis tools and methods to investigate a wide range of results.

Toxic release consequence analysis tool (TORCAT) for inherently safer design plant.

PubMed

Shariff, Azmi Mohd; Zaini, Dzulkarnain

2010-10-15

Many major accidents due to toxic release in the past have caused many fatalities such as the tragedy of MIC release in Bhopal, India (1984). One of the approaches is to use inherently safer design technique that utilizes inherent safety principle to eliminate or minimize accidents rather than to control the hazard. This technique is best implemented in preliminary design stage where the consequence of toxic release can be evaluated and necessary design improvements can be implemented to eliminate or minimize the accidents to as low as reasonably practicable (ALARP) without resorting to costly protective system. However, currently there is no commercial tool available that has such capability. This paper reports on the preliminary findings on the development of a prototype tool for consequence analysis and design improvement via inherent safety principle by utilizing an integrated process design simulator with toxic release consequence analysis model. The consequence analysis based on the worst-case scenarios during process flowsheeting stage were conducted as case studies. The preliminary finding shows that toxic release consequences analysis tool (TORCAT) has capability to eliminate or minimize the potential toxic release accidents by adopting the inherent safety principle early in preliminary design stage. 2010 Elsevier B.V. All rights reserved.

A systemic analysis of South Korea Sewol ferry accident - Striking a balance between learning and accountability.

PubMed

Kee, Dohyung; Jun, Gyuchan Thomas; Waterson, Patrick; Haslam, Roger

2017-03-01

The South Korea Sewol ferry accident in April 2014 claimed the lives of over 300 passengers and led to criminal charges of 399 personnel concerned including imprisonment of 154 of them as of Oct 2014. Blame and punishment culture can be prevalent in a more hierarchical society like South Korea as shown in the aftermath of this disaster. This study aims to analyse the South Korea ferry accident using Rasmussen's risk management framework and the associated AcciMap technique and to propose recommendations drawn from an AcciMap-based focus group with systems safety experts. The data for the accident analysis were collected mainly from an interim investigation report by the Board of Audit and Inspection of Korea and major South Korean and foreign newspapers. The analysis showed that the accident was attributed to many contributing factors arising from front-line operators, management, regulators and government. It also showed how the multiple factors including economic, social and political pressures and individual workload contributed to the accident and how they affected each other. This AcciMap was presented to 27 safety researchers and experts at 'the legacy of Jens Rasmussen' symposium adjunct to ODAM2014. Their recommendations were captured through a focus group. The four main recommendations include forgive (no blame and punishment on individuals), analyse (socio-technical system-based), learn (from why things do not go wrong) and change (bottom-up safety culture and safety system management). The findings offer important insights into how this type of accident should be understood, analysed and the subsequent response. Copyright © 2016 Elsevier Ltd. All rights reserved.

Influence of occupational safety management on the incidence rate of occupational accidents in the Spanish industrial and ornamental stone mining.

PubMed

Sanmiquel, Lluís; Rossell, Josep M; Vintró, Carla; Freijo, Modesto

2014-01-01

Mines are hazardous and workers can suffer many types of accidents caused by fire, flood, explosion or collapse. Injury incidence rates in mining are considerably higher than those registered by other economic sectors. One of the main reasons for this high-level incidence rate is the existence of a large number of dangerous workplaces. This work analyzes the influence that occupational safety management had on the accidents that took place in Spanish mining of industrial and ornamental stone during the period 2007-2008. Primary data sources are: (a) Results from a statistical study of the occupational health and safety management practices of 71 quarries defined by a questionnaire of 41 items; and (b) Occupational accidents registered in the Spanish industrial and ornamental stone mining throughout the period 2007-2008. The obtained results indicate that workplaces with a low average score in the analysis of occupational safety management have a higher incidence rate of accidents. Studies on mining workplaces are very important to help detect occupational safety concerns. Results from this study help raise awareness and will encourage the adoption of appropriate measures to improve safety.

Effects of health and safety problem recognition on small business facility investment

PubMed Central

2013-01-01

Objectives This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. Methods An individual survey of businesses’ present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Results Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was “very important”. Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Conclusions Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems. PMID:24472180

Effects of health and safety problem recognition on small business facility investment.

PubMed

Park, Jisu; Jeong, Harin; Hong, Sujin; Park, Jong-Tae; Kim, Dae-Sung; Kim, Jongseo; Kim, Hae-Joon

2013-10-23

This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. An individual survey of businesses' present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was "very important". Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems.

Consumer product safety: A systems problem

NASA Technical Reports Server (NTRS)

Clark, C. C.

1971-01-01

The manufacturer, tester, retailer, consumer, repairer disposer, trade and professional associations, national and international standards bodies, and governments in several roles are all involved in consumer product safety. A preliminary analysis, drawing on system safety techniques, is utilized to distinguish the inter-relations of these many groups and the responsibilities that they are or could take for product safety, including the slow accident hazards as well as the more commonly discussed fast accident hazards. The importance of interactive computer aided information flow among these groups is particularly stressed.

NASA Accident Precursor Analysis Handbook, Version 1.0

NASA Technical Reports Server (NTRS)

Groen, Frank; Everett, Chris; Hall, Anthony; Insley, Scott

2011-01-01

Catastrophic accidents are usually preceded by precursory events that, although observable, are not recognized as harbingers of a tragedy until after the fact. In the nuclear industry, the Three Mile Island accident was preceded by at least two events portending the potential for severe consequences from an underappreciated causal mechanism. Anomalies whose failure mechanisms were integral to the losses of Space Transportation Systems (STS) Challenger and Columbia had been occurring within the STS fleet prior to those accidents. Both the Rogers Commission Report and the Columbia Accident Investigation Board report found that processes in place at the time did not respond to the prior anomalies in a way that shed light on their true risk implications. This includes the concern that, in the words of the NASA Aerospace Safety Advisory Panel (ASAP), "no process addresses the need to update a hazard analysis when anomalies occur" At a broader level, the ASAP noted in 2007 that NASA "could better gauge the likelihood of losses by developing leading indicators, rather than continue to depend on lagging indicators". These observations suggest a need to revalidate prior assumptions and conclusions of existing safety (and reliability) analyses, as well as to consider the potential for previously unrecognized accident scenarios, when unexpected or otherwise undesired behaviors of the system are observed. This need is also discussed in NASA's system safety handbook, which advocates a view of safety assurance as driving a program to take steps that are necessary to establish and maintain a valid and credible argument for the safety of its missions. It is the premise of this handbook that making cases for safety more experience-based allows NASA to be better informed about the safety performance of its systems, and will ultimately help it to manage safety in a more effective manner. The APA process described in this handbook provides a systematic means of analyzing candidate accident precursors by evaluating anomaly occurrences for their system safety implications and, through both analytical and deliberative methods used to project to other circumstances, identifying those that portend more serious consequences to come if effective corrective action is not taken. APA builds upon existing safety analysis processes currently in practice within NASA, leveraging their results to provide an improved understanding of overall system risk. As such, APA represents an important dimension of safety evaluation; as operational experience is acquired, precursor information is generated such that it can be fed back into system safety analyses to risk-inform safety improvements. Importantly, APA utilizes anomaly data to predict risk whereas standard reliability and PRA approaches utilize failure data which often is limited and rare.

41 CFR 102-80.130 - Who must perform the equivalent level of safety analysis?

Code of Federal Regulations, 2010 CFR

2010-07-01

...-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety Analysis... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Who must perform the equivalent level of safety analysis? 102-80.130 Section 102-80.130 Public Contracts and Property Management...

Urban transport safety assessment in akure based on corresponding performance indicators

NASA Astrophysics Data System (ADS)

Oye, Adedamola; Aderinlewo, Olufikayo; Croope, Silvana

2013-03-01

The level of safety of the transportation system in Akure, Nigeria was assessed by identifying the associated road safety problems and developing the corresponding safety performance indicators. These indicators were analysed with respect to accidents that occurred within the city from the year 2005 to 2009 based on the corresponding attributable risk measures. The results of the analysis showed the state of existing safety programs in Akure town. Six safety performance indicators were identified namely alcohol and drug use, excessive speeds, protection system (use of seat belts and helmets), use of day time running lights, state of vehicles (passive safety) and road condition. These indicators were used to determine the percentage of injury accidents as follows: 83.33% and 86.36% for years 2005 and 2006 respectively, 81.46% for year 2007 while years 2008 and 2009 had 82.86% and 78.12% injury accidents respectively.

Assessing flight safety differences between the United States regional and major airlines

NASA Astrophysics Data System (ADS)

Sharp, Broderick H.

During 2008, the U.S. domestic airline departures exceeded 28,000 flights per day. Thirty-nine or less than 0.2 of 1% of these flights resulted in operational incidents or accidents. However, even a low percentage of airline accidents and incidents continue to cause human suffering and property loss. The charge of this study was the comparison of U.S. major and regional airline safety histories. The study spans safety events from January 1982 through December 2008. In this quantitative analysis, domestic major and regional airlines were statistically tested for their flight safety differences. Four major airlines and thirty-seven regional airlines qualified for the safety study which compared the airline groups' fatal accidents, incidents, non-fatal accidents, pilot errors, and the remaining six safety event probable cause types. The six other probable cause types are mechanical failure, weather, air traffic control, maintenance, other, and unknown causes. The National Transportation Safety Board investigated each airline safety event, and assigned a probable cause to each event. A sample of 500 events was randomly selected from the 1,391 airlines' accident and incident population. The airline groups' safety event probabilities were estimated using the least squares linear regression. A probability significance level of 5% was chosen to conclude the appropriate research question hypothesis. The airline fatal accidents and incidents probability levels were 1.2% and 0.05% respectively. These two research questions did not reach the 5% significance level threshold. Therefore, the airline groups' fatal accidents and non-destructive incidents probabilities favored the airline groups' safety differences hypothesis. The linear progression estimates for the remaining three research questions were 71.5% for non-fatal accidents, 21.8% for the pilot errors, and 7.4% significance level for the six probable causes. These research questions' linear regressions are greater than the 5% level. Consequently, these three research questions favored airline groups' safety similarities hypothesis. The study indicates the U.S. domestic major airlines were safer than the regional airlines. Ideas for potential airline safety progress can examine pilot fatigue, the airline groups' hiring policies, the government's airline oversight personnel, or the comparison of individual airline's operational policies.

Fatal accidents in nighttime vs. daytime highway construction work zones.

PubMed

Arditi, David; Lee, Dong-Eun; Polat, Gul

2007-01-01

Awareness about worker safety in nighttime construction has been a major concern because it is believed that nighttime construction creates hazardous work conditions. However, only a few studies provide valuable comparative information about accident characteristics of nighttime and daytime highway construction activities. This study investigates fatal accidents that occurred in Illinois highway work zones in the period 1996-2001 in order to determine the safety differences between nighttime and daytime highway construction. The lighting and weather conditions were included into the study as control parameters to see their effects on the frequency of fatal accidents occurring in work zones. According to this study, there is evidence that nighttime construction is more hazardous than daytime construction. The inclusion of a weather parameter into the analysis has limited effect on this finding. The study justifies establishing an efficient work zone accident reporting system and taking all necessary measures to enhance safety in nighttime work zones.

Cross-comparison of three surrogate safety methods to diagnose cyclist safety problems at intersections in Norway.

PubMed

Laureshyn, Aliaksei; Goede, Maartje de; Saunier, Nicolas; Fyhri, Aslak

2017-08-01

Relying on accident records as the main data source for studying cyclists' safety has many drawbacks, such as high degree of under-reporting, the lack of accident details and particularly of information about the interaction processes that led to the accident. It is also an ethical problem as one has to wait for accidents to happen in order to make a statement about cyclists' (un-)safety. In this perspective, the use of surrogate safety measures based on actual observations in traffic is very promising. In this study we used video data from three intersections in Norway that were all independently analysed using three methods: the Swedish traffic conflict technique (Swedish TCT), the Dutch conflict technique (DOCTOR) and the probabilistic surrogate measures of safety (PSMS) technique developed in Canada. The first two methods are based on manual detection and counting of critical events in traffic (traffic conflicts), while the third considers probabilities of multiple trajectories for each interaction and delivers a density map of potential collision points per site. Due to extensive use of microscopic data, PSMS technique relies heavily on automated tracking of the road users in video. Across the three sites, the methods show similarities or are at least "compatible" with the accident records. The two conflict techniques agree quite well for the number, type and location of conflicts, but some differences with no obvious explanation are also found. PSMS reports many more safety-relevant interactions including less severe events. The location of the potential collision points is compatible with what the conflict techniques suggest, but the possibly significant share of false alarms due to inaccurate trajectories extracted from video complicates the comparison. The tested techniques still require enhancement, with respect to better adjustment to analysis of the situations involving cyclists (and vulnerable road users in general) and further validation. However, we believe this to be a future direction for the road safety analysis as the number of accidents is constantly decreasing and the quality of accident data does not seem to improve. Copyright © 2016 Elsevier Ltd. All rights reserved.

Road accident rates: strategies and programmes for improving road traffic safety.

PubMed

Goniewicz, K; Goniewicz, M; Pawłowski, W; Fiedor, P

2016-08-01

Nowadays, the problem of road accident rates is one of the most important health and social policy issues concerning the countries in all continents. Each year, nearly 1.3 million people worldwide lose their life on roads, and 20-50 million sustain severe injuries, the majority of which require long-term treatment. The objective of the study was to identify the most frequent, constantly occurring causes of road accidents, as well as outline actions constituting a basis for the strategies and programmes aiming at improving traffic safety on local and global levels. Comparative analysis of literature concerning road safety was performed, confirming that although road accidents had a varied and frequently complex background, their causes have changed only to a small degree over the years. The causes include: lack of control and enforcement concerning implementation of traffic regulation (primarily driving at excessive speed, driving under the influence of alcohol, and not respecting the rights of other road users (mainly pedestrians and cyclists), lack of appropriate infrastructure and unroadworthy vehicles. The number of fatal accidents and severe injuries, resulting from road accidents, may be reduced through applying an integrated approach to safety on roads. The strategies and programmes for improving road traffic should include the following measures: reducing the risk of exposure to an accident, prevention of accidents, reduction in bodily injuries sustained in accidents, and reduction of the effects of injuries by improvement of post-accident medical care.

Aircraft Loss-of-Control: Analysis and Requirements for Future Safety-Critical Systems and Their Validation

NASA Technical Reports Server (NTRS)

Belcastro, Christine M.

2011-01-01

Loss of control remains one of the largest contributors to fatal aircraft accidents worldwide. Aircraft loss-of-control accidents are complex, resulting from numerous causal and contributing factors acting alone or more often in combination. Hence, there is no single intervention strategy to prevent these accidents. This paper summarizes recent analysis results in identifying worst-case combinations of loss-of-control accident precursors and their time sequences, a holistic approach to preventing loss-of-control accidents in the future, and key requirements for validating the associated technologies.

Transit safety & security statistics & analysis 2003 annual report (formerly SAMIS)

DOT National Transportation Integrated Search

2005-12-01

The Transit Safety & Security Statistics & Analysis 2003 Annual Report (formerly SAMIS) is a compilation and analysis of mass transit accident, casualty, and crime statistics reported under the Federal Transit Administrations (FTAs) National Tr...

Transit safety & security statistics & analysis 2002 annual report (formerly SAMIS)

DOT National Transportation Integrated Search

2004-12-01

The Transit Safety & Security Statistics & Analysis 2002 Annual Report (formerly SAMIS) is a compilation and analysis of mass transit accident, casualty, and crime statistics reported under the Federal Transit Administrations (FTAs) National Tr...

Fuzzy Bayesian Network-Bow-Tie Analysis of Gas Leakage during Biomass Gasification

PubMed Central

Yan, Fang; Xu, Kaili; Yao, Xiwen; Li, Yang

2016-01-01

Biomass gasification technology has been rapidly developed recently. But fire and poisoning accidents caused by gas leakage restrict the development and promotion of biomass gasification. Therefore, probabilistic safety assessment (PSA) is necessary for biomass gasification system. Subsequently, Bayesian network-bow-tie (BN-bow-tie) analysis was proposed by mapping bow-tie analysis into Bayesian network (BN). Causes of gas leakage and the accidents triggered by gas leakage can be obtained by bow-tie analysis, and BN was used to confirm the critical nodes of accidents by introducing corresponding three importance measures. Meanwhile, certain occurrence probability of failure was needed in PSA. In view of the insufficient failure data of biomass gasification, the occurrence probability of failure which cannot be obtained from standard reliability data sources was confirmed by fuzzy methods based on expert judgment. An improved approach considered expert weighting to aggregate fuzzy numbers included triangular and trapezoidal numbers was proposed, and the occurrence probability of failure was obtained. Finally, safety measures were indicated based on the obtained critical nodes. The theoretical occurrence probabilities in one year of gas leakage and the accidents caused by it were reduced to 1/10.3 of the original values by these safety measures. PMID:27463975

Home Safety, Safe Behaviors of Elderly People, and Fall Accidents At Home

ERIC Educational Resources Information Center

Erkal, Sibel

2010-01-01

The present study analyzed home safety and safe behaviors against fall accidents of elderly people living at home. The study group comprised 121 people aged 65+ living in the catchment area of Ankara Mamak Halil Ulgen Health Center. Data were collected via a personal information form and Home-Screen Scale. Statistical analysis used an independent…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Panayotov, Dobromir; Poitevin, Yves; Grief, Andrew

'Fusion for Energy' (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). Safety demonstration is an essential element for the integration of these TBSs into ITER and accident analysis is one of its critical components. A systematic approach to accident analysis has been developed under the F4E contract on TBS safety analyses. F4E technical requirements, together with Amec Foster Wheeler and INL efforts, have resulted in a comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials,more » and phenomena while remaining consistent with the approach already applied to ITER accident analyses. Furthermore, the methodology phases are illustrated in the paper by its application to the EU HCLL TBS using both MELCOR and RELAP5 codes.« less

The predictive validity of safety climate.

PubMed

Johnson, Stephen E

2007-01-01

Safety professionals have increasingly turned their attention to social science for insight into the causation of industrial accidents. One social construct, safety climate, has been examined by several researchers [Cooper, M. D., & Phillips, R. A. (2004). Exploratory analysis of the safety climate and safety behavior relationship. Journal of Safety Research, 35(5), 497-512; Gillen, M., Baltz, D., Gassel, M., Kirsch, L., & Vacarro, D. (2002). Perceived safety climate, job Demands, and coworker support among union and nonunion injured construction workers. Journal of Safety Research, 33(1), 33-51; Neal, A., & Griffin, M. A. (2002). Safety climate and safety behaviour. Australian Journal of Management, 27, 66-76; Zohar, D. (2000). A group-level model of safety climate: Testing the effect of group climate on microaccidents in manufacturing jobs. Journal of Applied Psychology, 85(4), 587-596; Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group-level climates. Journal of Applied Psychology, 90(4), 616-628] who have documented its importance as a factor explaining the variation of safety-related outcomes (e.g., behavior, accidents). Researchers have developed instruments for measuring safety climate and have established some degree of psychometric reliability and validity. The problem, however, is that predictive validity has not been firmly established, which reduces the credibility of safety climate as a meaningful social construct. The research described in this article addresses this problem and provides additional support for safety climate as a viable construct and as a predictive indicator of safety-related outcomes. This study used 292 employees at three locations of a heavy manufacturing organization to complete the 16 item Zohar Safety Climate Questionnaire (ZSCQ) [Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group-level climates. Journal of Applied Psychology, 90(4), 616-628]. In addition, safety behavior and accident experience data were collected for 5 months following the survey and were statistically analyzed (structural equation modeling, confirmatory factor analysis, exploratory factor analysis, etc.) to identify correlations, associations, internal consistency, and factorial structures. Results revealed that the ZSCQ: (a) was psychometrically reliable and valid, (b) served as an effective predictor of safety-related outcomes (behavior and accident experience), and (c) could be trimmed to an 11 item survey with little loss of explanatory power. Practitioners and researchers can use the ZSCQ with reasonable certainty of the questionnaire's reliability and validity. This provides a solid foundation for the development of meaningful organizational interventions and/or continued research into social factors affecting industrial accident experience.

Methodological guidelines for developing accident modification functions.

PubMed

Elvik, Rune

2015-07-01

This paper proposes methodological guidelines for developing accident modification functions. An accident modification function is a mathematical function describing systematic variation in the effects of road safety measures. The paper describes ten guidelines. An example is given of how to use the guidelines. The importance of exploratory analysis and an iterative approach in developing accident modification functions is stressed. The example shows that strict compliance with all the guidelines may be difficult, but represents a level of stringency that should be strived for. Currently the main limitations in developing accident modification functions are the small number of good evaluation studies and the often huge variation in estimates of effect. It is therefore still not possible to develop accident modification functions for very many road safety measures. Copyright © 2015 Elsevier Ltd. All rights reserved.

Driver Performance Problems of Intercity Bus Public Transportation Safety in Indonesia

NASA Astrophysics Data System (ADS)

Suraji, A.; Harnen, S.; Wicaksono, A.; Djakfar, L.

2017-11-01

The risk of an inter-city bus public accident can be influenced by various factors such as the driver’s performance. Therefore, knowing the various influential factors related to driver’s performance is very necessary as an effort to realize road traffic safety. This study aims to determine the factors that fall on the accident associated with the driver’s performance and make mathematical modeling factors that affect the accident. Methods of data retrieval were obtained from NTSC secondary data. The data was processed by identifying factors that cause the accident. Furthermore data processing and analysis used the PCA method to obtain mathematical modeling of factors influencing the inter-city bus accidents. The results showed that the main factors that cause accidents are health, discipline, and driver competence.

Off-road truck-related accidents in U.S. mines.

PubMed

Dindarloo, Saeid R; Pollard, Jonisha P; Siami-Irdemoosa, Elnaz

2016-09-01

Off-road trucks are one of the major sources of equipment-related accidents in the U.S. mining industries. A systematic analysis of all off-road truck-related accidents, injuries, and illnesses, which are reported and published by the Mine Safety and Health Administration (MSHA), is expected to provide practical insights for identifying the accident patterns and trends in the available raw database. Therefore, appropriate safety management measures can be administered and implemented based on these accident patterns/trends. A hybrid clustering-classification methodology using K-means clustering and gene expression programming (GEP) is proposed for the analysis of severe and non-severe off-road truck-related injuries at U.S. mines. Using the GEP sub-model, a small subset of the 36 recorded attributes was found to be correlated to the severity level. Given the set of specified attributes, the clustering sub-model was able to cluster the accident records into 5 distinct groups. For instance, the first cluster contained accidents related to minerals processing mills and coal preparation plants (91%). More than two-thirds of the victims in this cluster had less than 5years of job experience. This cluster was associated with the highest percentage of severe injuries (22 severe accidents, 3.4%). Almost 50% of all accidents in this cluster occurred at stone operations. Similarly, the other four clusters were characterized to highlight important patterns that can be used to determine areas of focus for safety initiatives. The identified clusters of accidents may play a vital role in the prevention of severe injuries in mining. Further research into the cluster attributes and identified patterns will be necessary to determine how these factors can be mitigated to reduce the risk of severe injuries. Analyzing injury data using data mining techniques provides some insight into attributes that are associated with high accuracies for predicting injury severity. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

10 CFR 830.204 - Documented safety analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., and accident conditions, including consideration of natural and man-made external events... radioactive and other hazardous materials, and consideration of the need for analysis of accidents which may... preparedness, fire protection, waste management, and radiation protection; and (6) With respect to a nonreactor...

10 CFR 830.204 - Documented safety analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., and accident conditions, including consideration of natural and man-made external events... radioactive and other hazardous materials, and consideration of the need for analysis of accidents which may... preparedness, fire protection, waste management, and radiation protection; and (6) With respect to a nonreactor...

10 CFR 830.204 - Documented safety analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., and accident conditions, including consideration of natural and man-made external events... radioactive and other hazardous materials, and consideration of the need for analysis of accidents which may... preparedness, fire protection, waste management, and radiation protection; and (6) With respect to a nonreactor...

10 CFR 830.204 - Documented safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., and accident conditions, including consideration of natural and man-made external events... radioactive and other hazardous materials, and consideration of the need for analysis of accidents which may... preparedness, fire protection, waste management, and radiation protection; and (6) With respect to a nonreactor...

The Driver Behaviour Questionnaire as accident predictor; A methodological re-meta-analysis.

PubMed

Af Wåhlberg, A E; Barraclough, P; Freeman, J

2015-12-01

The Manchester Driver Behaviour Questionnaire (DBQ) is the most commonly used self-report tool in traffic safety research and applied settings. It has been claimed that the violation factor of this instrument predicts accident involvement, which was supported by a previous meta-analysis. However, that analysis did not test for methodological effects, or include unpublished results. The present study re-analysed studies on prediction of accident involvement from DBQ factors, including lapses, and many unpublished effects. Tests of various types of dissemination bias and common method variance were undertaken. Outlier analysis showed that some effects were probably not reliable data, but excluding them did not change the results. For correlations between violations and crashes, tendencies for published effects to be larger than unpublished ones and for effects to decrease over time were observed, but were not significant. Also, using the mean of accidents as proxy for effect indicated that studies where effects for violations are not reported have smaller effect sizes. These differences indicate dissemination bias. Studies using self-reported accidents as dependent variables had much larger effects than those using recorded accident data. Also, zero-order correlations were larger than partial correlations controlled for exposure. Similarly, violations/accidents effects were strong only when there was also a strong correlation between accidents and exposure. Overall, the true effect is probably very close to zero (r<.07) for violations versus traffic accident involvement, depending upon which tendencies are controlled for. Methodological factors and dissemination bias have inflated the published effect sizes of the DBQ. Strong evidence of various artefactual effects is apparent. A greater level of care should be taken if the DBQ continues to be used in traffic safety research. Also, validation of self-reports should be more comprehensive in the future, taking into account the possibility of common method variance. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

Work-related accidents among the Iranian population: a time series analysis, 2000–2011

PubMed Central

Karimlou, Masoud; Imani, Mehdi; Hosseini, Agha-Fatemeh; Dehnad, Afsaneh; Vahabi, Nasim; Bakhtiyari, Mahmood

2015-01-01

Background Work-related accidents result in human suffering and economic losses and are considered as a major health problem worldwide, especially in the economically developing world. Objectives To introduce seasonal autoregressive moving average (ARIMA) models for time series analysis of work-related accident data for workers insured by the Iranian Social Security Organization (ISSO) between 2000 and 2011. Methods In this retrospective study, all insured people experiencing at least one work-related accident during a 10-year period were included in the analyses. We used Box–Jenkins modeling to develop a time series model of the total number of accidents. Results There was an average of 1476 accidents per month (1476·05±458·77, mean±SD). The final ARIMA (p,d,q) (P,D,Q)s model for fitting to data was: ARIMA(1,1,1)×(0,1,1)12 consisting of the first ordering of the autoregressive, moving average and seasonal moving average parameters with 20·942 mean absolute percentage error (MAPE). Conclusions The final model showed that time series analysis of ARIMA models was useful for forecasting the number of work-related accidents in Iran. In addition, the forecasted number of work-related accidents for 2011 explained the stability of occurrence of these accidents in recent years, indicating a need for preventive occupational health and safety policies such as safety inspection. PMID:26119774

Work-related accidents among the Iranian population: a time series analysis, 2000-2011.

PubMed

Karimlou, Masoud; Salehi, Masoud; Imani, Mehdi; Hosseini, Agha-Fatemeh; Dehnad, Afsaneh; Vahabi, Nasim; Bakhtiyari, Mahmood

2015-01-01

Work-related accidents result in human suffering and economic losses and are considered as a major health problem worldwide, especially in the economically developing world. To introduce seasonal autoregressive moving average (ARIMA) models for time series analysis of work-related accident data for workers insured by the Iranian Social Security Organization (ISSO) between 2000 and 2011. In this retrospective study, all insured people experiencing at least one work-related accident during a 10-year period were included in the analyses. We used Box-Jenkins modeling to develop a time series model of the total number of accidents. There was an average of 1476 accidents per month (1476·05±458·77, mean±SD). The final ARIMA (p,d,q) (P,D,Q)s model for fitting to data was: ARIMA(1,1,1)×(0,1,1)12 consisting of the first ordering of the autoregressive, moving average and seasonal moving average parameters with 20·942 mean absolute percentage error (MAPE). The final model showed that time series analysis of ARIMA models was useful for forecasting the number of work-related accidents in Iran. In addition, the forecasted number of work-related accidents for 2011 explained the stability of occurrence of these accidents in recent years, indicating a need for preventive occupational health and safety policies such as safety inspection.

DOE Office of Scientific and Technical Information (OSTI.GOV)

MITCHELL,GERRY W.; LONGLEY,SUSAN W.; PHILBIN,JEFFREY S.

This Safety Analysis Report (SAR) is prepared in compliance with the requirements of DOE Order 5480.23, Nuclear Safety Analysis Reports, and has been written to the format and content guide of DOE-STD-3009-94 Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Safety Analysis Reports. The Hot Cell Facility is a Hazard Category 2 nonreactor nuclear facility, and is operated by Sandia National Laboratories for the Department of Energy. This SAR provides a description of the HCF and its operations, an assessment of the hazards and potential accidents which may occur in the facility. The potential consequences and likelihood ofmore » these accidents are analyzed and described. Using the process and criteria described in DOE-STD-3009-94, safety-related structures, systems and components are identified, and the important safety functions of each SSC are described. Additionally, information which describes the safety management programs at SNL are described in ancillary chapters of the SAR.« less

Application of systems and control theory-based hazard analysis to radiation oncology.

PubMed

Pawlicki, Todd; Samost, Aubrey; Brown, Derek W; Manger, Ryan P; Kim, Gwe-Ya; Leveson, Nancy G

2016-03-01

Both humans and software are notoriously challenging to account for in traditional hazard analysis models. The purpose of this work is to investigate and demonstrate the application of a new, extended accident causality model, called systems theoretic accident model and processes (STAMP), to radiation oncology. Specifically, a hazard analysis technique based on STAMP, system-theoretic process analysis (STPA), is used to perform a hazard analysis. The STPA procedure starts with the definition of high-level accidents for radiation oncology at the medical center and the hazards leading to those accidents. From there, the hierarchical safety control structure of the radiation oncology clinic is modeled, i.e., the controls that are used to prevent accidents and provide effective treatment. Using STPA, unsafe control actions (behaviors) are identified that can lead to the hazards as well as causal scenarios that can lead to the identified unsafe control. This information can be used to eliminate or mitigate potential hazards. The STPA procedure is demonstrated on a new online adaptive cranial radiosurgery procedure that omits the CT simulation step and uses CBCT for localization, planning, and surface imaging system during treatment. The STPA procedure generated a comprehensive set of causal scenarios that are traced back to system hazards and accidents. Ten control loops were created for the new SRS procedure, which covered the areas of hospital and department management, treatment design and delivery, and vendor service. Eighty three unsafe control actions were identified as well as 472 causal scenarios that could lead to those unsafe control actions. STPA provides a method for understanding the role of management decisions and hospital operations on system safety and generating process design requirements to prevent hazards and accidents. The interaction of people, hardware, and software is highlighted. The method of STPA produces results that can be used to improve safety and prevent accidents and warrants further investigation.

A comparative analysis of occupational health and safety risk prevention practices in Sweden and Spain.

PubMed

Morillas, Rosa María; Rubio-Romero, Juan Carlos; Fuertes, Alba

2013-12-01

Scandinavian countries such as Sweden implemented the occupational health and safety (OHS) measures in the European Directive 89/391/EEC earlier than other European counties, including Spain. In fact, statistics on workplace accident rates reveal that between 2004 and 2009, there were considerably fewer accidents in Sweden than in Spain. The objective of the research described in this paper was to reduce workplace accidents and to improve OHS management in Spain by exploring the OHS practices in Sweden. For this purpose, an exploratory comparative study was conducted, which focused on the effectiveness of the EU directive in both countries. The study included a cross-sectional analysis of workplace accident rates and other contextual indicators in both national contexts. A case study of 14 Swedish and Spanish companies identified 14 differences in the preventive practices implemented. These differences were then assessed with a Delphi study to evaluate their contribution to the reduction of workplace accidents and their potential for improving health and safety management in Spain. The results showed that there was agreement concerning 12 of the 14 practices. Finally, we discuss opportunities of improvement in Spanish companies so that they can make their risk management practices more effective. The findings of this comparative study on the implementation of the European Directive 89/391/EEC in both Sweden and Spain have revealed health and safety managerial practices which, if properly implemented, could contribute to improved work conditions and accident statistics of Spanish companies. In particular, the results suggest that Spanish employers, safety managers, external prevention services, safety deputies and Labour Inspectorates should consider implementing streamlined internal preventive management, promoting the integration of prevention responsibilities to the chain of command, and preventing health and safety management from becoming a mere exchange of documents. The authors also encourage future research studies to use the methodology presented to compare and assess the European Directive 89/391/EEC implementation in other European countries. © 2013.

Analysis of Material Handling Safety in Construction Sites and Countermeasures for Effective Enhancement

PubMed Central

Anil Kumar, C. N.; Sakthivel, M.; Elangovan, R. K.; Arularasu, M.

2015-01-01

One of many hazardous workplaces includes the construction sites as they involve several dangerous tasks. Many studies have revealed that material handling equipment is a major cause of accidents at these sites. Though safety measures are being followed and monitored continuously, accident rates are still high as either workers are unaware of hazards or the safety regulations are not being strictly followed. This paper analyses the safety management systems at construction sites through means of questionnaire surveys with employees, specifically referring to safety of material handling equipment. Based on results of the questionnaire surveys, two construction sites were selected for a safety education program targeting worker safety related to material handling equipment. Knowledge levels of the workers were gathered before and after the program and results obtained were subjected to a t-test analysis to mark significance level of the conducted safety education program. PMID:26446572

Vessel traffic safety in busy waterways: A case study of accidents in western shenzhen port.

PubMed

Mou, J M; Chen, P F; He, Y X; Yip, Tsz Leung; Li, W H; Tang, J; Zhang, H Z

2016-08-03

Throughout the world, busy waterways near large ports witness heavy vessel traffic in recent decades. The waterways are characterized by high risk in terms of loss of life, property, and pollution to environment. To facilitate maritime safety management with satisfactory efficiency and efficacy, the authors propose a framework of safety indexes to evaluate the risk level in busy waterways according to the accident severity, fatality rate and special indicators of maritime transportation. The safety indexes consist of Safety Evaluation Index (SEI) and Safety Warning Index (SWI), and are derived from the proposed risk criteria of Chinese vessel traffic. As a case study, data on vessel traffic accidents reported in the Western Shenzhen Port, South China from 1995 to 2015 are analyzed. The actual risk level of this area during the period is calculated under the framework. The implementation of the safety indexes indicate that the risk criteria and safety indexes are practicable and effective for the vessel traffic management. The methodology based on long-term accident data can significantly support the risk analysis in the macroscopic perspective for busy ports and waterways, such that SWI can act as threshold to trigger actions, while SEI can act as an indicator to measure safety status. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Analysis of accidents for magnetically induced displacement of the large ferromagnetic material in magnetic resonance systems].

PubMed

Yamatani, Yuya; Doi, Tsukasa; Ueyama, Tsuyoshi; Nishiki, Shigeo; Ogura, Akio; Kawamitsu, Hideaki; Tsuchihashi, Toshio; Okuaki, Tomoyuki; Matsuda, Tsuyoshi

2013-01-01

To improve magnetic resonance (MR) safety, we surveyed the accidents caused by large ferromagnetic materials brought into MR systems accidentally. We sent a questionnaire to 700 Japanese medical institutions and received 405 valid responses (58%). A total of 97 accidents in 77 institutions were observed and we analyzed them regarding incidental rate, the detail situation and environmental factors. The mean accident rate of each institute was 0.7/100,000 examinations, which was widely distributed (0-25.6/100,000) depending on the institute. In this survey, relatively small institutes with less than 500 beds tend to have these accidents more frequently (p<0.01). The institutes in which daily MR examination counts are more than 10 patients have fewer accidents than those with less than 10 daily examinations. The institutes with 6-10 MR examinations daily have significantly more accidents than that with more than 10 daily MR examinations (p<0.01). The main mental factors of the accidents were considered to be "prejudice" and "carelessness" but some advocate "ignorance." Though we could not find significant reduction in the institutes that have lectures and training for MR safety, we should continue lectures and training for MR safety to reduce accidents due to "ignorance."

Frequency of Specific Categories of Aviation Accidents and Incidents During 2001-2010

NASA Technical Reports Server (NTRS)

Evans, Joni K.

2014-01-01

The purpose of this study was to determine the types of accidents or incidents that are most important to the aviation safety risk. All accidents and incidents from 2001-2010 were assigned occurrence categories based on the taxonomy developed by the Commercial Aviation Safety Team/International Civil Aviation Organization (CAST/ICAO) Common Taxonomy Team (CICTT). The most frequently recorded categories were selected within each of five metrics: total accidents, fatal accidents, total injuries, fatal injuries and total incidents. This analysis was done separately for events within Part 121, Scheduled Part 135, Non-Scheduled Part 135 and Part 91. Combining those five sets of categories resulted in groups of between seven and eleven occurrence categories, depending on the flight operation. These groups represent 65-85% of all accidents and 68-81% of incidents.

Scenario analysis of freight vehicle accident risks in Taiwan.

PubMed

Tsai, Ming-Chih; Su, Chien-Chih

2004-07-01

This study develops a quantitative risk model by utilizing Generalized Linear Interactive Model (GLIM) to analyze the major freight vehicle accidents in Taiwan. Eight scenarios are established by interacting three categorical variables of driver ages, vehicle types and road types, each of which contains two levels. The database that consists of 2043 major accidents occurring between 1994 and 1998 in Taiwan is utilized to fit and calibrate the model parameters. The empirical results indicate that accident rates of freight vehicles in Taiwan were high in the scenarios involving trucks and non-freeway systems, while; accident consequences were severe in the scenarios involving mature drivers or non-freeway systems. Empirical evidences also show that there is no significant relationship between accident rates and accident consequences. This is to stress that safety studies that describe risk merely as accident rates rather than the combination of accident rates and consequences by definition might lead to biased risk perceptions. Finally, the study recommends using number of vehicle as an alternative of traffic exposure in commercial vehicle risk analysis. The merits of this would be that it is simple and thus reliable; meanwhile, the resulted risk that is termed as fatalities per vehicle could provide clear and direct policy implications for insurance practices and safety regulations.

Safety analysts training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bolton, P.

The purpose of this task was to support ESH-3 in providing Airborne Release Fraction and Respirable Fraction training to safety analysts at LANL who perform accident analysis, hazard analysis, safety analysis, and/or risk assessments at nuclear facilities. The task included preparation of materials for and the conduct of two 3-day training courses covering the following topics: safety analysis process; calculation model; aerosol physic concepts for safety analysis; and overview of empirically derived airborne release fractions and respirable fractions.

SLUDGE TREATMENT PROJECT KOP CONCEPTUAL DESIGN CONTROL DECISION REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARRO CA

2010-03-09

This control decision addresses the Knock-Out Pot (KOP) Disposition KOP Processing System (KPS) conceptual design. The KPS functions to (1) retrieve KOP material from canisters, (2) remove particles less than 600 {micro}m in size and low density materials from the KOP material, (3) load the KOP material into Multi-Canister Overpack (MCO) baskets, and (4) stage the MCO baskets for subsequent loading into MCOs. Hazard and accident analyses of the KPS conceptual design have been performed to incorporate safety into the design process. The hazard analysis is documented in PRC-STP-00098, Knock-Out Pot Disposition Project Conceptual Design Hazard Analysis. The accident analysismore » is documented in PRC-STP-CN-N-00167, Knock-Out Pot Disposition Sub-Project Canister Over Lift Accident Analysis. Based on the results of these analyses, and analyses performed in support of MCO transportation and MCO processing and storage activities at the Cold Vacuum Drying Facility (CVDF) and Canister Storage Building (CSB), control decision meetings were held to determine the controls required to protect onsite and offsite receptors and facility workers. At the conceptual design stage, these controls are primarily defined by their safety functions. Safety significant structures, systems, and components (SSCs) that could provide the identified safety functions have been selected for the conceptual design. It is anticipated that some safety SSCs identified herein will be reclassified based on hazard and accident analyses performed in support of preliminary and detailed design.« less

Analysis 320 coal mine accidents using structural equation modeling with unsafe conditions of the rules and regulations as exogenous variables.

PubMed

Zhang, Yingyu; Shao, Wei; Zhang, Mengjia; Li, Hejun; Yin, Shijiu; Xu, Yingjun

2016-07-01

Mining has been historically considered as a naturally high-risk industry worldwide. Deaths caused by coal mine accidents are more than the sum of all other accidents in China. Statistics of 320 coal mine accidents in Shandong province show that all accidents contain indicators of "unsafe conditions of the rules and regulations" with a frequency of 1590, accounting for 74.3% of the total frequency of 2140. "Unsafe behaviors of the operator" is another important contributory factor, which mainly includes "operator error" and "venturing into dangerous places." A systems analysis approach was applied by using structural equation modeling (SEM) to examine the interactions between the contributory factors of coal mine accidents. The analysis of results leads to three conclusions. (i) "Unsafe conditions of the rules and regulations," affect the "unsafe behaviors of the operator," "unsafe conditions of the equipment," and "unsafe conditions of the environment." (ii) The three influencing factors of coal mine accidents (with the frequency of effect relation in descending order) are "lack of safety education and training," "rules and regulations of safety production responsibility," and "rules and regulations of supervision and inspection." (iii) The three influenced factors (with the frequency in descending order) of coal mine accidents are "venturing into dangerous places," "poor workplace environment," and "operator error." Copyright © 2016 Elsevier Ltd. All rights reserved.

Mines Systems Safety Improvement Using an Integrated Event Tree and Fault Tree Analysis

NASA Astrophysics Data System (ADS)

Kumar, Ranjan; Ghosh, Achyuta Krishna

2017-04-01

Mines systems such as ventilation system, strata support system, flame proof safety equipment, are exposed to dynamic operational conditions such as stress, humidity, dust, temperature, etc., and safety improvement of such systems can be done preferably during planning and design stage. However, the existing safety analysis methods do not handle the accident initiation and progression of mine systems explicitly. To bridge this gap, this paper presents an integrated Event Tree (ET) and Fault Tree (FT) approach for safety analysis and improvement of mine systems design. This approach includes ET and FT modeling coupled with redundancy allocation technique. In this method, a concept of top hazard probability is introduced for identifying system failure probability and redundancy is allocated to the system either at component or system level. A case study on mine methane explosion safety with two initiating events is performed. The results demonstrate that the presented method can reveal the accident scenarios and improve the safety of complex mine systems simultaneously.

INDUSTRIAL/MILITARY ACTIVITY-INITIATED ACCIDENT SCREENING ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.A. Kalinich

1999-09-27

Impacts due to nearby installations and operations were determined in the Preliminary MGDS Hazards Analysis (CRWMS M&O 1996) to be potentially applicable to the proposed repository at Yucca Mountain. This determination was conservatively based on limited knowledge of the potential activities ongoing on or off the Nevada Test Site (NTS). It is intended that the Industrial/Military Activity-Initiated Accident Screening Analysis provided herein will meet the requirements of the ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987) in establishing whether this external event can be screened from further consideration or must be includedmore » as a design basis event (DBE) in the development of accident scenarios for the Monitored Geologic Repository (MGR). This analysis only considers issues related to preclosure radiological safety. Issues important to waste isolation as related to impact from nearby installations will be covered in the MGR performance assessment.« less

How safe are HEMS-programmes in Germany? A retrospective analysis.

PubMed

Thies, Karl-Christian; Sep, Daan; Derksen, Remon

2006-03-01

Recent accidents with helicopter emergency medical service (HEMS) aircraft raise the question how safe HEMS in Germany is and how accidents could be prevented. We surveyed all German HEMS-programmes and reviewed the data of the German Aviation Authority regarding accidents with HEMS. An average German HEMS-programme encounters one accident leading to at least severe damage or loss of the helicopter in 26 operating years, one accident resulting in casualties in 65 operating years and one fatal accident in 111 operating years. The major causes of accidents were obstacle strikes during landing at the scene. Flying in bad weather conditions and lack of discipline were other factors contributing to HEMS-accidents. HEMS-safety could be improved by special training programmes for pilots and HEMS-crewmembers to address the factors listed above. Safety training for doctors is recommended but we did not find support for the notion of changing the doctor's legal position of a passenger to a HEMS-crewmember.

A profile of fatal accidents involving alcohol

DOT National Transportation Integrated Search

1977-09-01

Author's abstract: Accident investigation studies were conducted during 1971-75 in the cities of Boston, Baltimore, Oklahoma City and Albuquerque where Alcohol Safety Action Programs (ASAPs) were operating. Analysis of the four studies, plus newly av...

Analysis of Workplace Accidents in Automotive Repair Workshops in Spain.

PubMed

López-Arquillos, Antonio; Rubio-Romero, Juan Carlos

2016-09-01

To analyze the effects of the factors associated with different types of injury (superficial wounds, dislocations and sprains, bone fractures, concussion and internal injuries, burns scalding and freezing) caused by occupational accidents in automotive repair workshops. Study of a sample consisting of 89,954 industry accidents reported from 2003 to 2008. Odds ratios were calculated with a 95% confidence interval. Belonging to a small company is a risk factor for suffering three of the five types of injury studied. Women are less likely to suffer burns and superficial wounds, and more likely to suffer dislocations or sprains. Foreign workers are more likely to suffer concussion and internal injuries. Health and safety strategies and accident prevention measures should be individualized and adapted to the type of worker most likely to be injured in each type of accident. Occupational health and safety training courses designed according to worker profile, and improving the participation of the workers in small firms creating regional or roving safety representatives would improve working conditions.

Road safety analysis on Achmad Yani frontage road Surabaya

NASA Astrophysics Data System (ADS)

Machsus; Prayogo, I.; Chomaedhi; Hayati, D. W.; Utanaka, A.

2017-11-01

This research discusses road safety analysis on the operation of frontage road on the west side of Achmad Yani Road Surabaya. This research began by conducting survey on secondary data of traffic accidents. In addition, primary data survey was conducted to obtain traffic data, geometric road data, and other supporting data at the study site along the west side frontage of Ahmad Yani Road Surabaya. Devices used in this research include camera, handy cam, speed gun, counters of vehicles, rolling meter, computer and others. In outline, the stages to conduct this research are divided into 4 stages, namely 1.the preparation stage, 2.data collection and processing, 3. analysis and discussion, and 4. conclusion. The results of this study showed that the accident characteristics of the frontage road are (i) 3 accidents occured per month, (ii) motorcycles was accounted for the largest proportion of accidents which amounted to 74.6 percent, (iii) there were 3 accident victims per month, and (iv) material losses per month worths 1.2 million. The accident rate in 2016 was 0.04 crashes per one million vehicle travels per kilometer, while during 2 months in 2017 it was 0.15 accidents per one million vehicle travels per kilometer. Black spot area of accident is located on Sta 2 + 800 to 2 + 900 which is in front of Graha Pena building and DBL Arena. The high rate of accidents is influenced by the speed of the vehicle which 85 percentile exceeds the speed limit of 40km per hour.

Anthropotechnological analysis of industrial accidents in Brazil.

PubMed Central

Binder, M. C.; de Almeida, I. M.; Monteau, M.

1999-01-01

The Brazilian Ministry of Labour has been attempting to modify the norms used to analyse industrial accidents in the country. For this purpose, in 1994 it tried to make compulsory use of the causal tree approach to accident analysis, an approach developed in France during the 1970s, without having previously determined whether it is suitable for use under the industrial safety conditions that prevail in most Brazilian firms. In addition, opposition from Brazilian employers has blocked the proposed changes to the norms. The present study employed anthropotechnology to analyse experimental application of the causal tree method to work-related accidents in industrial firms in the region of Botucatu, São Paulo. Three work-related accidents were examined in three industrial firms representative of local, national and multinational companies. On the basis of the accidents analysed in this study, the rationale for the use of the causal tree method in Brazil can be summarized for each type of firm as follows: the method is redundant if there is a predominance of the type of risk whose elimination or neutralization requires adoption of conventional industrial safety measures (firm representative of local enterprises); the method is worth while if the company's specific technical risks have already largely been eliminated (firm representative of national enterprises); and the method is particularly appropriate if the firm has a good safety record and the causes of accidents are primarily related to industrial organization and management (multinational enterprise). PMID:10680249

Investigations on optimization of accident management measures following a station blackout accident in a VVER-1000 pressurized water reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tusheva, P.; Schaefer, F.; Kliem, S.

2012-07-01

The reactor safety issues are of primary importance for preserving the health of the population and ensuring no release of radioactivity and fission products into the environment. A part of the nuclear research focuses on improvement of the safety of existing nuclear power plants. Studies, research and efforts are a continuing process at improving the safety and reliability of existing and newly developed nuclear power plants at prevention of a core melt accident. Station blackout (loss of AC power supply) is one of the dominant accidents taken into consideration at performing accident analysis. In case of multiple failures of safetymore » systems it leads to a severe accident. To prevent an accident to turn into a severe one or to mitigate the consequences, accident management measures must be performed. The present paper outlines possibilities for application and optimization of accident management measures following a station blackout accident. Assessed is the behaviour of the nuclear power plant during a station blackout accident without accident management measures and with application of primary/secondary side oriented accident management measures. Discussed are the possibilities for operators ' intervention and the influence of the performed accident management measures on the course of the accident. Special attention has been paid to the effectiveness of the passive feeding and physical phenomena having an influence on the system behaviour. The performed simulations show that the effectiveness of the secondary side feeding procedure can be limited due to an early evaporation or flashing effects in the feed water system. The analyzed cases show that the effectiveness of the accident management measures strongly depends on the initiation criteria applied for depressurization of the reactor coolant system. (authors)« less

Development of Database for Accident Analysis in Indian Mines

NASA Astrophysics Data System (ADS)

Tripathy, Debi Prasad; Guru Raghavendra Reddy, K.

2016-10-01

Mining is a hazardous industry and high accident rates associated with underground mining is a cause of deep concern. Technological developments notwithstanding, rate of fatal accidents and reportable incidents have not shown corresponding levels of decline. This paper argues that adoption of appropriate safety standards by both mine management and the government may result in appreciable reduction in accident frequency. This can be achieved by using the technology in improving the working conditions, sensitising workers and managers about causes and prevention of accidents. Inputs required for a detailed analysis of an accident include information on location, time, type, cost of accident, victim, nature of injury, personal and environmental factors etc. Such information can be generated from data available in the standard coded accident report form. This paper presents a web based application for accident analysis in Indian mines during 2001-2013. An accident database (SafeStat) prototype based on Intranet of the TCP/IP agreement, as developed by the authors, is also discussed.

The Evaluation of the Safety Benefits of Combined Passive and On-Board Active Safety Applications

PubMed Central

Page, Yves; Cuny, Sophie; Zangmeister, Tobias; Kreiss, Jens-Peter; Hermitte, Thierry

2009-01-01

One of the objectives of the European TRACE project (TRaffic Accident Causation in Europe, 2006–2008) was to estimate the proportion of injury accidents that could be avoided and/or the proportion of injury accidents where the severity could be mitigated for on-the-market safety applications, if 100 % of the car fleet would be equipped with them. We have selected for evaluation the Electronic Stability Control (ESC) and the Emergency Brake Assist (EBA) applications. As for passive safety systems, recent cars are designed to offer overall safety protection. Car structure, load limiters, front airbags, side airbags, knee airbags, pretensioners, padding and non aggressive structures in the door panel, the dashboard, the windshield, the seats, and the head rest also contribute to applying more protection. The whole safety package is very difficult to evaluate separately, one element independently segmented from the others. We decided to consider evaluating the effectivenessof the whole passive safety package, This package,, for the sake of simplicity, was the number of stars awarded at the Euro NCAP testing. The challenges were to compare the effectiveness of some safety configuration SC I, with the effectiveness of a different safety configuration SC II. A safety configuration is understood as a package of safety functions. Ten comparisons have been carried out such as the evaluation of the safety benefit of a fifth star given that the car has four stars and an EBA. The main outcome of this analysis is that any addition of a passive or active safety function selected in this analysis is producing increased safety benefits. For example, if all cars were five stars fitted with EBA and ESC, instead of four stars without ESC and EBA, injury accidents would be reduced by 47.2% for severe injuries and 69.5% for fatal injuries. PMID:20184838

Utilization of accident databases and fuzzy sets to estimate frequency of HazMat transport accidents.

PubMed

Qiao, Yuanhua; Keren, Nir; Mannan, M Sam

2009-08-15

Risk assessment and management of transportation of hazardous materials (HazMat) require the estimation of accident frequency. This paper presents a methodology to estimate hazardous materials transportation accident frequency by utilizing publicly available databases and expert knowledge. The estimation process addresses route-dependent and route-independent variables. Negative binomial regression is applied to an analysis of the Department of Public Safety (DPS) accident database to derive basic accident frequency as a function of route-dependent variables, while the effects of route-independent variables are modeled by fuzzy logic. The integrated methodology provides the basis for an overall transportation risk analysis, which can be used later to develop a decision support system.

LNG risk management

NASA Astrophysics Data System (ADS)

Martino, P.

1980-12-01

A general methodology is presented for conducting an analysis of the various aspects of the hazards associated with the storage and transportation of liquefied natural gas (LNG) which should be considered during the planning stages of a typical LNG ship terminal. The procedure includes the performance of a hazards and system analysis of the proposed site, a probability analysis of accident scenarios and safety impacts, an analysis of the consequences of credible accidents such as tanker accidents, spills and fires, the assessment of risks and the design and evaluation of risk mitigation measures.

An Updated Examination of Aviation Accidents Associated with Turbulence, Wind Shear and Thunderstorm

NASA Technical Reports Server (NTRS)

Evans, Joni K.

2014-01-01

One of the technical challenges within the Atmospheric Environment Safety Technologies (AEST) Project of the Aviation Safety Program was to "improve and expand remote sensing and mitigation of hazardous atmospheric environments and phenomena"1. In 2012, the author performed an analysis comparing various characteristics of accidents associated with different types of atmospheric hazard environments2. This document reports an update to that analysis which was done in preparation for presenting these findings at the 2015 annual meeting of the Transportation Research Board. Specifically, an additional three years of data were available, and a time-trend analysis was added.

Data mining and visualization of the Alabama accident database

DOT National Transportation Integrated Search

2000-08-01

The Alabama Department of Public Safety has developed and maintains a centralized database that contain traffic accident data collected from crash report completed by local police officers and state troopers. The Critical Analysis Reporting Environme...

The practical application of mishap data in Army aircraft system safety programs

NASA Technical Reports Server (NTRS)

Darrah, J. T., Jr.

1971-01-01

The means are discussed by which the the United States Army Board for Aviation Accident Research (USABAAR) now utilizes the vast store of historical accident data in the application of the system safety concept for developmental aircraft. USABAAR serves as the central agency for the Army Accident Prevention Program which includes the receipt, processing, and analysis of all data and information related to Army aircraft accident experience. It is pointed out that methods which served the cause of accident prevention so well in the past are no longer adequate and that traditional parameters used to measure mishap experience have become obsolete. USABAAR has developed, and recently put into use, completely revised accident reporting forms which greatly expand the scope and detail of information provided as a result of investigation. This and other factors which have resulted in an improved data system are discussed in detail.

Systems Analysis of NASA Aviation Safety Program: Final Report

NASA Technical Reports Server (NTRS)

Jones, Sharon M.; Reveley, Mary S.; Withrow, Colleen A.; Evans, Joni K.; Barr, Lawrence; Leone, Karen

2013-01-01

A three-month study (February to April 2010) of the NASA Aviation Safety (AvSafe) program was conducted. This study comprised three components: (1) a statistical analysis of currently available civilian subsonic aircraft data from the National Transportation Safety Board (NTSB), the Federal Aviation Administration (FAA), and the Aviation Safety Information Analysis and Sharing (ASIAS) system to identify any significant or overlooked aviation safety issues; (2) a high-level qualitative identification of future safety risks, with an assessment of the potential impact of the NASA AvSafe research on the National Airspace System (NAS) based on these risks; and (3) a detailed, top-down analysis of the NASA AvSafe program using an established and peer-reviewed systems analysis methodology. The statistical analysis identified the top aviation "tall poles" based on NTSB accident and FAA incident data from 1997 to 2006. A separate examination of medical helicopter accidents in the United States was also conducted. Multiple external sources were used to develop a compilation of ten "tall poles" in future safety issues/risks. The top-down analysis of the AvSafe was conducted by using a modification of the Gibson methodology. Of the 17 challenging safety issues that were identified, 11 were directly addressed by the AvSafe program research portfolio.

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 3: Nuclear Safety Analysis Document (NSAD)

NASA Technical Reports Server (NTRS)

1972-01-01

Nuclear safety analysis as applied to a space base mission is presented. The nuclear safety analysis document summarizes the mission and the credible accidents/events which may lead to nuclear hazards to the general public. The radiological effects and associated consequences of the hazards are discussed in detail. The probability of occurrence is combined with the potential number of individuals exposed to or above guideline values to provide a measure of accident and total mission risk. The overall mission risk has been determined to be low with the potential exposure to or above 25 rem limited to less than 4 individuals per every 1000 missions performed. No radiological risk to the general public occurs during the prelaunch phase at KSC. The most significant risks occur from prolonged exposure to reactor debris following land impact generally associated with the disposal phase of the mission where fission product inventories can be high.

A system of safety management practices and worker engagement for reducing and preventing accidents: an empirical and theoretical investigation.

PubMed

Wachter, Jan K; Yorio, Patrick L

2014-07-01

The overall research objective was to theoretically and empirically develop the ideas around a system of safety management practices (ten practices were elaborated), to test their relationship with objective safety statistics (such as accident rates), and to explore how these practices work to achieve positive safety results (accident prevention) through worker engagement. Data were collected using safety manager, supervisor and employee surveys designed to assess and link safety management system practices, employee perceptions resulting from existing practices, and safety performance outcomes. Results indicate the following: there is a significant negative relationship between the presence of ten individual safety management practices, as well as the composite of these practices, with accident rates; there is a significant negative relationship between the level of safety-focused worker emotional and cognitive engagement with accident rates; safety management systems and worker engagement levels can be used individually to predict accident rates; safety management systems can be used to predict worker engagement levels; and worker engagement levels act as mediators between the safety management system and safety performance outcomes (such as accident rates). Even though the presence of safety management system practices is linked with incident reduction and may represent a necessary first-step in accident prevention, safety performance may also depend on mediation by safety-focused cognitive and emotional engagement by workers. Thus, when organizations invest in a safety management system approach to reducing/preventing accidents and improving safety performance, they should also be concerned about winning over the minds and hearts of their workers through human performance-based safety management systems designed to promote and enhance worker engagement. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

APT Blanket System Loss-of-Coolant Accident (LOCA) Analysis Based on Initial Conceptual Design - Case 3: External HR Break at Pump Outlet without Pump Trip

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamm, L.L.

1998-10-07

This report is one of a series of reports that document normal operation and accident simulations for the Accelerator Production of Tritium (APT) blanket heat removal (HR) system. These simulations were performed for the Preliminary Safety Analysis Report.

An analysis of truck size and weight : phase I - safety.

DOT National Transportation Integrated Search

2013-11-01

Commercial motor vehicles carrying heavier loads or employing multiple trailers present significant concerns regarding the impact of their use in terms of increased accidents, accident severity and fatalities. In 2011, the most recent year for which ...

A statistical analysis of the impact of advertising signs on road safety.

PubMed

Yannis, George; Papadimitriou, Eleonora; Papantoniou, Panagiotis; Voulgari, Chrisoula

2013-01-01

This research aims to investigate the impact of advertising signs on road safety. An exhaustive review of international literature was carried out on the effect of advertising signs on driver behaviour and safety. Moreover, a before-and-after statistical analysis with control groups was applied on several road sites with different characteristics in the Athens metropolitan area, in Greece, in order to investigate the correlation between the placement or removal of advertising signs and the related occurrence of road accidents. Road accident data for the 'before' and 'after' periods on the test sites and the control sites were extracted from the database of the Hellenic Statistical Authority, and the selected 'before' and 'after' periods vary from 2.5 to 6 years. The statistical analysis shows no statistical correlation between road accidents and advertising signs in none of the nine sites examined, as the confidence intervals of the estimated safety effects are non-significant at 95% confidence level. This can be explained by the fact that, in the examined road sites, drivers are overloaded with information (traffic signs, directions signs, labels of shops, pedestrians and other vehicles, etc.) so that the additional information load from advertising signs may not further distract them.

The accident analysis of mobile mine machinery in Indian opencast coal mines.

PubMed

Kumar, R; Ghosh, A K

2014-01-01

This paper presents the analysis of large mining machinery related accidents in Indian opencast coal mines. The trends of coal production, share of mining methods in production, machinery deployment in open cast mines, size and population of machinery, accidents due to machinery, types and causes of accidents have been analysed from the year 1995 to 2008. The scrutiny of accidents during this period reveals that most of the responsible factors are machine reversal, haul road design, human fault, operator's fault, machine fault, visibility and dump design. Considering the types of machines, namely, dumpers, excavators, dozers and loaders together the maximum number of fatal accidents has been caused by operator's faults and human faults jointly during the period from 1995 to 2008. The novel finding of this analysis is that large machines with state-of-the-art safety system did not reduce the fatal accidents in Indian opencast coal mines.

Key factors contributing to accident severity rate in construction industry in Iran: a regression modelling approach.

PubMed

Soltanzadeh, Ahmad; Mohammadfam, Iraj; Moghimbeigi, Abbas; Ghiasvand, Reza

2016-03-01

Construction industry involves the highest risk of occupational accidents and bodily injuries, which range from mild to very severe. The aim of this cross-sectional study was to identify the factors associated with accident severity rate (ASR) in the largest Iranian construction companies based on data about 500 occupational accidents recorded from 2009 to 2013. We also gathered data on safety and health risk management and training systems. Data were analysed using Pearson's chi-squared coefficient and multiple regression analysis. Median ASR (and the interquartile range) was 107.50 (57.24- 381.25). Fourteen of the 24 studied factors stood out as most affecting construction accident severity (p<0.05). These findings can be applied in the design and implementation of a comprehensive safety and health risk management system to reduce ASR.

Actions to Implement the Recommendations of the Presidential Commission on the Space Shuttle Challenger Accident: Executive Summary

NASA Technical Reports Server (NTRS)

1986-01-01

The status of the implementation of the recommendations of the Presidential Commission on the Space Shuttle Challenger Accident is reported. The implementation of recommendations in the following areas is detailed: (1) solid rocket motor design; (2) shuttle management structure, including the shuttle safety panel and astronauts in management; (3) critical item review and hazard analysis; (4) safety organization; (5) improved communication; (6) landing safety; (7) launch abort and crew escape; (8) flight rate; and (9) maintenance safeguards. Supporting memoranda and communications from NASA are appended.

[Implementation of safety devices: biological accident prevention].

PubMed

Catalán Gómez, M Teresa; Sol Vidiella, Josep; Castellà Castellà, Manel; Castells Bo, Carolina; Losada Pla, Nuria; Espuny, Javier Lluís

2010-04-01

Accidental exposures to blood and biological material were the most frequent and potentially serious accidents in healthcare workers, reported in the Prevention of Occupational Risks Unit within 2002. Evaluate the biological percutaneous accidents decrease after a progressive introduction of safety devices. Biological accidents produced between 2.002 and 2.006 were analyzed and reported by the injured healthcare workers to the Level 2b Hospital Prevention of Occupational Risk Unit with 238 beds and 750 employees. The key of the study was the safety devices (peripheral i.v. catheter, needleless i.v. access device and capillary blood collection lancet). Within 2002, 54 percutaneous biological accidents were registered and 19 in 2006, that represents a 64.8% decreased. There has been no safety devices accident reported involving these material. Accidents registered during the implantation period occurred because safety devices were not used at that time. Safety devices have proven to be effective in reducing needle stick percutaneous accidents, so that they are a good choice in the primary prevention of biological accidents contact.

Nuclear reactor safety research since three mile island.

PubMed

Mynatt, F R

1982-04-09

The Three Mile Island nuclear power plant accident has resulted in redirection of reactor safety research priorities. The small release to the environment of radioactive iodine-13 to 17 curies in a total radioactivity release of 2.4 million to 13 million curies-has led to a new emphasis on the physical chemistry of fission product behavior in accidents; the fact that the nuclear core was severely damaged but did not melt down has opened a new accident regime-that of the degraded core; the role of the operators in the progression and severity of the accident has shifted emphasis from equipment reliability to human reliability. As research progresses in these areas, the technical base for regulation and risk analysis will change substantially.

Epidemiology of Accidents in Tile Factories of Mangalore City in Karnataka

PubMed Central

Kumar, S Ganesh; Rathnakar, UP; Harsha Kumar, HN

2010-01-01

Background: Occupational accidents are a major point of concern in industries. The academic community should take the first step to address the long-neglected concerns of occupational safety. Objective: To assess the prevalence and pattern of occupational accidents. Materials and Methods: A record-based, cross-sectional study was done in three tile factories of Mangalore city, in Karnataka. A total of 416 workers were analyzed for the year 2004, and data regarding age, sex, job duration, type and nature of injury, body parts involved, and time of injury were collected in a prestructured proforma. Statistical Analysis: Proportions, Chi-square test, Univariate and Multivariate analysis. Results: The overall prevalence rate of accidents was found to be 18.5%. It was found that almost around 86% of the accidents had affected the limbs (upper limb 24.7%, lower limb 61%), around half (52%) of the injuries were contributed by superficial injuries, 40% of accidents were due to stepping/striking against objects and while handling. Hand tools and machinery in motion contributed to around 20% of the accidents. Accidents were more common among the younger age group and less-experienced workers. Multiple logistic regression analyses revealed that the age group of 30-39 years had an independent significant association with accidents (OR = 0.21, P = 0.04). Conclusion: Accidents in tile industries are an important occupational health problem in this area of the country. There is a need for proper safety training of the workers. PMID:20606926

Risk factors associated with traffic violations and accident severity in China.

PubMed

Zhang, Guangnan; Yau, Kelvin K W; Chen, Guanghan

2013-10-01

With the recent economic boom in China, vehicle volume and the number of traffic accident fatalities have become the highest in the world. Meanwhile, traffic accidents have become the leading cause of death in China. Systematically analyzing road safety data from different perspectives and applying empirical methods/implementing proper measures to reduce the fatality rate will be an urgent and challenging task for China in the coming years. In this study, we analyze the traffic accident data for the period 2006-2010 in Guangdong Province, China. These data, extracted from the Traffic Management Sector-Specific Incident Case Data Report, are the only officially available and reliable source of traffic accident data (with a sample size>7000 per year). In particular, we focus on two outcome measures: traffic violations and accident severity. Human, vehicle, road and environmental risk factors are considered. First, the results establish the role of traffic violations as one of the major risks threatening road safety. An immediate implication is: if the traffic violation rate could be reduced or controlled successfully, then the rate of serious injuries and fatalities would be reduced accordingly. Second, specific risk factors associated with traffic violations and accident severity are determined. Accordingly, to reduce traffic accident incidence and fatality rates, measures such as traffic regulations and legislation-targeting different vehicle types/driver groups with respect to the various human, vehicle and environment risk factors-are needed. Such measures could include road safety programs for targeted driver groups, focused enforcement of traffic regulations and road/transport facility improvements. Data analysis results arising from this study will shed lights on the development of similar (adjusted) measures to reduce traffic violations and/or accident fatalities and injuries, and to promote road safety in other regions. Copyright © 2013 Elsevier Ltd. All rights reserved.

Safety at Passive Grade Crossings. Volume 1 : Analysis

DOT National Transportation Integrated Search

1998-07-21

More than 4,000 accidents have occurred at the nation's active and passive grade crossings each year from 1991 through 1996. Many of the accidents at active crossings have involved highway vehicle drivers who did not comply with train-activated warni...

Usage and effectiveness of seat and shoulder belts in rural Pennsylvania accidents

DOT National Transportation Integrated Search

1974-12-01

This report presents an analysis of lap-belt and shoulder- belt usage and effectiveness in rural Pennsylvania accidents. The data were collected by the Pennsylvania State Police under an agreement with the National Highway Traffic Safety Administrati...

Design and implementation of an identification system in construction site safety for proactive accident prevention.

PubMed

Yang, Huanjia; Chew, David A S; Wu, Weiwei; Zhou, Zhipeng; Li, Qiming

2012-09-01

Identifying accident precursors using real-time identity information has great potential to improve safety performance in construction industry, which is still suffering from day to day records of accident fatality and injury. Based on the requirements analysis for identifying precursor and the discussion of enabling technology solutions for acquiring and sharing real-time automatic identification information on construction site, this paper proposes an identification system design for proactive accident prevention to improve construction site safety. Firstly, a case study is conducted to analyze the automatic identification requirements for identifying accident precursors in construction site. Results show that it mainly consists of three aspects, namely access control, training and inspection information and operation authority. The system is then designed to fulfill these requirements based on ZigBee enabled wireless sensor network (WSN), radio frequency identification (RFID) technology and an integrated ZigBee RFID sensor network structure. At the same time, an information database is also designed and implemented, which includes 15 tables, 54 queries and several reports and forms. In the end, a demonstration system based on the proposed system design is developed as a proof of concept prototype. The contributions of this study include the requirement analysis and technical design of a real-time identity information tracking solution for proactive accident prevention on construction sites. The technical solution proposed in this paper has a significant importance in improving safety performance on construction sites. Moreover, this study can serve as a reference design for future system integrations where more functions, such as environment monitoring and location tracking, can be added. Copyright © 2011 Elsevier Ltd. All rights reserved.

Effectiveness of Direct Safety Regulations on Manufacturers and Users of Industrial Machines: Its Implications on Industrial Safety Policies in Republic of Korea.

PubMed

Choi, Gi Heung

2017-03-01

Despite considerable efforts made in recent years, the industrial accident rate and the fatality rate in the Republic of Korea are much higher than those in most developed countries in Europe and North America. Industrial safety policies and safety regulations are also known to be ineffective and inefficient in some cases. This study focuses on the quantitative evaluation of the effectiveness of direct safety regulations such as safety certification, self-declaration of conformity, and safety inspection of industrial machines in the Republic of Korea. Implications on safety policies to restructure the industrial safety system associated with industrial machines are also explored. Analysis of causes in industrial accidents associated with industrial machines confirms that technical causes need to be resolved to reduce both the frequency and the severity of such industrial accidents. Statistical analysis also confirms that the indirect effects of safety device regulation on users are limited for a variety of reasons. Safety device regulation needs to be shifted to complement safety certification and self-declaration of conformity for more balanced direct regulations on manufacturers and users. An example of cost-benefit analysis on conveyor justifies such a transition. Industrial safety policies and regulations associated with industrial machines must be directed towards eliminating the sources of danger at the stage of danger creation, thereby securing the safe industrial machines. Safety inspection further secures the safety of workers at the stage of danger use. The overall balance between such safety regulations is achieved by proper distribution of industrial machines subject to such regulations and the intensity of each regulation. Rearrangement of industrial machines subject to safety certification and self-declaration of conformity to include more movable industrial machines and other industrial machines with a high level of danger is also suggested.

Systematic strategies for the third industrial accident prevention plan in Korea.

PubMed

Kang, Young-sig; Yang, Sung-hwan; Kim, Tae-gu; Kim, Day-sung

2012-01-01

To minimize industrial accidents, it's critical to evaluate a firm's priorities for prevention factors and strategies since such evaluation provides decisive information for preventing industrial accidents and maintaining safety management. Therefore, this paper proposes the evaluation of priorities through statistical testing of prevention factors with a cause analysis in a cause and effect model. A priority matrix criterion is proposed to apply the ranking and for the objectivity of questionnaire results. This paper used regression method (RA), exponential smoothing method (ESM), double exponential smoothing method (DESM), autoregressive integrated moving average (ARIMA) model and proposed analytical function method (PAFM) to analyze trends of accident data that will lead to an accurate prediction. This paper standardized the questionnaire results of workers and managers in manufacturing and construction companies with less than 300 employees, located in the central Korean metropolitan areas where fatal accidents have occurred. Finally, a strategy was provided to construct safety management for the third industrial accident prevention plan and a forecasting method for occupational accident rates and fatality rates for occupational accidents per 10,000 people.

Major differences in rates of occupational accidents between different nationalities of seafarers.

PubMed

Hansen, Henrik L; Laursen, Lise Hedgaard; Frydberg, Morten; Kristensen, Soeren

2008-01-01

Earlier studies and statistics have shown that merchant seafarers from the South East Asia had considerable lower accident rates when compared with seafarers from Western Europe. The purposes of the study were to investigate whether the earlier observations were sustained if further sources on occurrence of accidents were used and to identify specific causes of excess accident rates among certain nationalities. Occupational accidents aboard Danish merchant ships during one year were identified from four different sources. These included accidents reported to the maritime authorities, accidents reported to a mutual insurance company, files on medical costs reimbursed by the government and finally, accidents in which there has been contact to the radio medical service. Time at risk aboard was obtained from a register on all employment periods aboard merchant ships. A total of 943 accidents causing personal injury to a seafarer directly caused by work aboard were identified. Among these accidents, 499 had taken place aboard cargo ships in international trade. Only these were used in the detailed analysis. The accident rate for all identified accidents aboard cargo ships were 84 accidents per 1,000 years aboard. The crude incidence rate ratio (IRR) for East European seafarers was 0.88 and for South East Asians 0.38 using West European seafarers as reference. In a Poisson regression analysis, the IRR for South East Asians was 0.29 (0.22-0.38). In an analysis including only more serious accidents, IRR for South East Asians rose to 0.36 (0.26-0.48). This study indicates that seafarers from South East Asia, mainly the Philippines, may have a genuine lower risk of occupational accidents in comparison with seafarers from Western and Eastern Europe. Differences in approach to safety and risk taking between South East Asian and European seafarers should be identified and positives attitudes included in accident preventing programmes. Main messages Seafarers from South East Asia, mainly the Philippines, seem to have a genuine lower risk of occupational accidents in comparison with seafarers from Western and Eastern Europe. Differences in approach to safety and risk taking between South East Asian and European seafarers should be identified and positives attitudes included in accident preventing programmes.

Off-road truck-related accidents in U.S. mines

PubMed Central

Dindarloo, Saeid R.; Pollard, Jonisha P.; Siami-Irdemoosa, Elnaz

2016-01-01

Introduction Off-road trucks are one of the major sources of equipment-related accidents in the U.S. mining industries. A systematic analysis of all off-road truck-related accidents, injuries, and illnesses, which are reported and published by the Mine Safety and Health Administration (MSHA), is expected to provide practical insights for identifying the accident patterns and trends in the available raw database. Therefore, appropriate safety management measures can be administered and implemented based on these accident patterns/trends. Methods A hybrid clustering-classification methodology using K-means clustering and gene expression programming (GEP) is proposed for the analysis of severe and non-severe off-road truck-related injuries at U.S. mines. Using the GEP sub-model, a small subset of the 36 recorded attributes was found to be correlated to the severity level. Results Given the set of specified attributes, the clustering sub-model was able to cluster the accident records into 5 distinct groups. For instance, the first cluster contained accidents related to minerals processing mills and coal preparation plants (91%). More than two-thirds of the victims in this cluster had less than 5 years of job experience. This cluster was associated with the highest percentage of severe injuries (22 severe accidents, 3.4%). Almost 50% of all accidents in this cluster occurred at stone operations. Similarly, the other four clusters were characterized to highlight important patterns that can be used to determine areas of focus for safety initiatives. Conclusions The identified clusters of accidents may play a vital role in the prevention of severe injuries in mining. Further research into the cluster attributes and identified patterns will be necessary to determine how these factors can be mitigated to reduce the risk of severe injuries. Practical application Analyzing injury data using data mining techniques provides some insight into attributes that are associated with high accuracies for predicting injury severity. PMID:27620937

Alternative method of highway traffic safety analysis for developing countries using delphi technique and Bayesian network.

PubMed

Mbakwe, Anthony C; Saka, Anthony A; Choi, Keechoo; Lee, Young-Jae

2016-08-01

Highway traffic accidents all over the world result in more than 1.3 million fatalities annually. An alarming number of these fatalities occurs in developing countries. There are many risk factors that are associated with frequent accidents, heavy loss of lives, and property damage in developing countries. Unfortunately, poor record keeping practices are very difficult obstacle to overcome in striving to obtain a near accurate casualty and safety data. In light of the fact that there are numerous accident causes, any attempts to curb the escalating death and injury rates in developing countries must include the identification of the primary accident causes. This paper, therefore, seeks to show that the Delphi Technique is a suitable alternative method that can be exploited in generating highway traffic accident data through which the major accident causes can be identified. In order to authenticate the technique used, Korea, a country that underwent similar problems when it was in its early stages of development in addition to the availability of excellent highway safety records in its database, is chosen and utilized for this purpose. Validation of the methodology confirms the technique is suitable for application in developing countries. Furthermore, the Delphi Technique, in combination with the Bayesian Network Model, is utilized in modeling highway traffic accidents and forecasting accident rates in the countries of research. Copyright © 2016 Elsevier Ltd. All rights reserved.

The influence of total flight time, recent flight time and age on pilot accident rates

DOT National Transportation Integrated Search

1983-06-30

This paper presents initial finding from a research effort conducted for the Safety Analysis Dvision, Office of Aviation Safety, Federal Aviation Administration (FAA). The analysis considers the influence of recent pilot flight time, total pilot flig...

Impact of the effect of economic crisis and the targeted motorcycle safety programme on motorcycle-related accidents, injuries and fatalities in Malaysia.

PubMed

Law, T H; Umar, R S Radin; Zulkaurnain, S; Kulanthayan, S

2005-03-01

In 1997, a Motorcycle Safety Programme (MSP) was introduced to address the motorcycle-related accident problem. The MSP was specifically targeted at motorcyclists. In addition to the MSP, the recent economic recession has significantly contributed to a reduction of traffic-related incidents. This paper examines the effects of the recent economic crisis and the MSP on motorcycle-related accidents, casualties and fatalities in Malaysia. The autocorrelation integrated moving average model with transfer function was used to evaluate the overall effects of the interventions. The variables used in developing the model were gross domestic product and MSPs. The analysis found a 25% reduction in the number of motorcycle-related accidents, a 27% reduction in motorcycle casualties and a 38% reduction in motorcycle fatalities after the implementation of MSP. Findings indicate that the MSP has been one of the effective measures in reducing motorcycle safety problems in Malaysia. Apart from that, the performance of the country's economy was also found to be significant in explaining the number of motorcycle-related accidents, casualties and fatalities in Malaysia.

Alternative Fuels Data Center: Natural Gas Safety after a Traffic Accident

Science.gov Websites

Natural Gas Safety after a Traffic Accident to someone by E-mail Share Alternative Fuels Data Center: Natural Gas Safety after a Traffic Accident on Facebook Tweet about Alternative Fuels Data Center : Natural Gas Safety after a Traffic Accident on Twitter Bookmark Alternative Fuels Data Center: Natural Gas

Factor Analysis of Traffic Safety in Urban Roads Based on FTA-LEC

NASA Astrophysics Data System (ADS)

Shuicheng, TIAN; Xingbo, YANG; Xiaoqing, SHEN; Detao, ZHANG

2018-05-01

In order to reduce the number and the loss of urban road traffic accidents in our country, improve the safety of road traffic, a statistical analysis of the research report on major road traffic accidents in 2016 was conducted. The risk factors affecting urban road traffic in China were analyzed by using FTA to find the basic hidden events. Secondly, the risk value of the identified hidden danger events were calculated and classified into four levels I, II, III and IV through the LEC evaluation method. Finally, the graded results of risk factors are verified through a case of specific accidents in Beijing. The results show that: the case verified the scientificalness and effectiveness of hazard classification and provided guidance for urban road traffic management.

Occupational safety and health in construction: a review of applications and trends

PubMed Central

SUÁREZ SÁNCHEZ, Fabián Alberto; CARVAJAL PELÁEZ, Gloria Isabel; CATALÁ ALÍS, Joaquín

2017-01-01

Due to the high number of accidents that occur in construction and the consequences this has for workers, organizations, society and countries, occupational safety and health (OSH) has become a very important issue for stakeholders to take care of the human resource. For this reason, and in order to know how OSH research in the construction sector has evolved over time, this article–in which articles published in English were studied–presents an analysis of research conducted from 1930 to 2016. The classification of documents was carried out following the Occupational Safety and Health Cycle which is composed of five steps: regulation, education and training, risk assessment, risk prevention, and accident analysis. With the help of tree diagrams we show that evolution takes place. In addition, risk assessment, risk prevention, and accident analysis were the research topics with the highest number of papers. The main objective of the study was to contribute to knowledge of the subject, showing trends through an exploratory study that may serve as a starting point for further research. PMID:28179610

Occupational safety and health in construction: a review of applications and trends.

PubMed

Suárez Sánchez, Fabián Alberto; Carvajal Peláez, Gloria Isabel; Catalá Alís, Joaquín

2017-06-08

Due to the high number of accidents that occur in construction and the consequences this has for workers, organizations, society and countries, occupational safety and health (OSH) has become a very important issue for stakeholders to take care of the human resource. For this reason, and in order to know how OSH research in the construction sector has evolved over time, this article-in which articles published in English were studied-presents an analysis of research conducted from 1930 to 2016. The classification of documents was carried out following the Occupational Safety and Health Cycle which is composed of five steps: regulation, education and training, risk assessment, risk prevention, and accident analysis. With the help of tree diagrams we show that evolution takes place. In addition, risk assessment, risk prevention, and accident analysis were the research topics with the highest number of papers. The main objective of the study was to contribute to knowledge of the subject, showing trends through an exploratory study that may serve as a starting point for further research.

50 CFR 401.17 - Safety and accident prevention.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Safety and accident prevention. 401.17... FISHERIES CONSERVATION, DEVELOPMENT AND ENHANCEMENT § 401.17 Safety and accident prevention. In the... governing safety, health and sanitation. ...

Relationship between organizational justice and organizational safety climate: do fairness perceptions influence employee safety behaviour?

PubMed

Gyekye, Seth Ayim; Haybatollahi, Mohammad

2014-01-01

This study investigated the relationships between organizational justice, organizational safety climate, job satisfaction, safety compliance and accident frequency. Ghanaian industrial workers participated in the study (N = 320). Safety climate and justice perceptions were assessed with Hayes, Parender, Smecko, et al.'s (1998) and Blader and Tyler's (2003) scales respectively. A median split was performed to dichotomize participants into 2 categories: workers with positive and workers with negative justice perceptions. Confirmatory factors analysis confirmed the 5-factor structure of the safety scale. Regression analyses and t tests indicated that workers with positive fairness perceptions had constructive perspectives regarding workplace safety, expressed greater job satisfaction, were more compliant with safety policies and registered lower accident rates. These findings provide evidence that the perceived level of fairness in an organization is closely associated with workplace safety perception and other organizational factors which are important for safety. The implications for safety research are discussed.

A Human Factors Analysis and Classification System (HFACS) Examination of Commercial Vessel Accidents

DTIC Science & Technology

2012-09-01

Naval Operations before the Congress on FY2013 Department of Navy posture. Heinrich , H . W. (1941). Industrial accident prevention : A scientific...Theory The core of the Domino Theory, developed by Herbert W. Heinrich who studied industrial safety in the early 1900s, is that accidents are a result...chain of events resulting in an accident . Heinrich likened the dominos to unsafe conditions or unsafe acts, where their subsequent removal prevents a

Performance prediction of the Strong company's soft ground arrestor system using a numerical analysis.

DOT National Transportation Integrated Search

2009-10-01

Air transportation has an outstanding safety record; however, accidents do occur. Aircraft accidents can occur while the aircraft is at cruise altitude or during land movements: taxiing, takeoff, and landing. Overruns occur when an aircraft is unable...

Tank car accident data analysis

DOT National Transportation Integrated Search

1991-06-01

This report presents the results of a study of accidents involving railroad tank cars. The study is part of an overall effort to provide improved safety of rail transportation at reduced life-cycle costs. A major goal of the study is to provide a tec...

Incorporating real-time traffic and weather data to explore road accident likelihood and severity in urban arterials.

PubMed

Theofilatos, Athanasios

2017-06-01

The effective treatment of road accidents and thus the enhancement of road safety is a major concern to societies due to the losses in human lives and the economic and social costs. The investigation of road accident likelihood and severity by utilizing real-time traffic and weather data has recently received significant attention by researchers. However, collected data mainly stem from freeways and expressways. Consequently, the aim of the present paper is to add to the current knowledge by investigating accident likelihood and severity by exploiting real-time traffic and weather data collected from urban arterials in Athens, Greece. Random Forests (RF) are firstly applied for preliminary analysis purposes. More specifically, it is aimed to rank candidate variables according to their relevant importance and provide a first insight on the potential significant variables. Then, Bayesian logistic regression as well finite mixture and mixed effects logit models are applied to further explore factors associated with accident likelihood and severity respectively. Regarding accident likelihood, the Bayesian logistic regression showed that variations in traffic significantly influence accident occurrence. On the other hand, accident severity analysis revealed a generally mixed influence of traffic variations on accident severity, although international literature states that traffic variations increase severity. Lastly, weather parameters did not find to have a direct influence on accident likelihood or severity. The study added to the current knowledge by incorporating real-time traffic and weather data from urban arterials to investigate accident occurrence and accident severity mechanisms. The identification of risk factors can lead to the development of effective traffic management strategies to reduce accident occurrence and severity of injuries in urban arterials. Copyright © 2017 Elsevier Ltd and National Safety Council. All rights reserved.

Professional Preparation for Careers in Safety.

ERIC Educational Resources Information Center

Della-Giustina, Daniel

There has been a long existing need for individuals with extensive training and concentration in safety studies. The foundation areas upon which a curriculum for training safety practitioners is based should include: (1) trends in accident prevention and control; (2) safety analysis of human and machine tasks; (3) hazard identification and control…

RELEASE OF DRIED RADIOACTIVE WASTE MATERIALS TECHNICAL BASIS DOCUMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

KOZLOWSKI, S.D.

2007-05-30

This technical basis document was developed to support RPP-23429, Preliminary Documented Safety Analysis for the Demonstration Bulk Vitrification System (PDSA) and RPP-23479, Preliminary Documented Safety Analysis for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Facility. The main document describes the risk binning process and the technical basis for assigning risk bins to the representative accidents involving the release of dried radioactive waste materials from the Demonstration Bulk Vitrification System (DBVS) and to the associated represented hazardous conditions. Appendices D through F provide the technical basis for assigning risk bins to the representative dried waste release accident and associated represented hazardous conditionsmore » for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Packaging Unit (WPU). The risk binning process uses an evaluation of the frequency and consequence of a given representative accident or represented hazardous condition to determine the need for safety structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls. A representative accident or a represented hazardous condition is assigned to a risk bin based on the potential radiological and toxicological consequences to the public and the collocated worker. Note that the risk binning process is not applied to facility workers because credible hazardous conditions with the potential for significant facility worker consequences are considered for safety-significant SSCs and/or TSR-level controls regardless of their estimated frequency. The controls for protection of the facility workers are described in RPP-23429 and RPP-23479. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described below.« less

Applying the AcciMap methodology to investigate the tragic Sewol Ferry accident in South Korea.

PubMed

Lee, Samuel; Moh, Young Bo; Tabibzadeh, Maryam; Meshkati, Najmedin

2017-03-01

This study applies the AcciMap methodology, which was originally proposed by Professor Jens Rasmussen (1997), to the analysis of the tragic Sewol Ferry accident in South Korea on April 16, 2014, which killed 304 mostly young people and is considered as a national disaster in that country. This graphical representation, by incorporating associated socio-technical factors into an integrated framework, provides a big-picture to illustrate the context in which an accident occurred as well as the interactions between different levels of the studied system that resulted in that event. In general, analysis of past accidents within the stated framework can define the patterns of hazards within an industrial sector. Such analysis can lead to the definition of preconditions for safe operations, which is a main focus of proactive risk management systems. In the case of the Sewol Ferry accident, a lot of the blame has been placed on the Sewol's captain and its crewmembers. However, according to this study, which relied on analyzing all available sources published in English and Korean, the disaster is the result of a series of lapses and disregards for safety across different levels of government and regulatory bodies, Chonghaejin Company, and the Sewol's crewmembers. The primary layers of the AcciMap framework, which include the political environment and non-proactive governmental body; inadequate regulations and their lax oversight and enforcement; poor safety culture; inconsideration of human factors issues; and lack of and/or outdated standard operating and emergency procedures were not only limited to the maritime industry in South Korea, and the Sewol Ferry accident, but they could also subject any safety-sensitive industry anywhere in the world. Copyright © 2016 Elsevier Ltd. All rights reserved.

49 CFR 240.309 - Railroad oversight responsibilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... reported train accidents attributed to poor safety performance by locomotive engineers; (3) The number and... and analysis concerning the administration of its program for responding to detected instances of poor... analysis shall involve: (1) The number and nature of the instances of detected poor safety conduct...

Maritime Transportation Risk Assessment of Tianjin Port with Bayesian Belief Networks.

PubMed

Zhang, Jinfen; Teixeira, Ângelo P; Guedes Soares, C; Yan, Xinping; Liu, Kezhong

2016-06-01

This article develops a Bayesian belief network model for the prediction of accident consequences in the Tianjin port. The study starts with a statistical analysis of historical accident data of six years from 2008 to 2013. Then a Bayesian belief network is constructed to express the dependencies between the indicator variables and accident consequences. The statistics and expert knowledge are synthesized in the Bayesian belief network model to obtain the probability distribution of the consequences. By a sensitivity analysis, several indicator variables that have influence on the consequences are identified, including navigational area, ship type and time of the day. The results indicate that the consequences are most sensitive to the position where the accidents occurred, followed by time of day and ship length. The results also reflect that the navigational risk of the Tianjin port is at the acceptable level, despite that there is more room of improvement. These results can be used by the Maritime Safety Administration to take effective measures to enhance maritime safety in the Tianjin port. © 2016 Society for Risk Analysis.

Occupational Safety Precautions among Nurses at Four Hospitals, Nablus District, Palestine.

PubMed

Al-Khatib, I A; El Ansari, W; Areqat, T A; Darkhawaja, R A; Mansour, S H; Tucktuck, M A; Khatib, J I

2015-10-01

Occupational hazards, exposure to blood and body fluids (BBF) accidents and safety precautions constitute an important public health issue. We assessed the prevalence and determinants of exposure to occupational hazards among nurses, and their knowledge of occupational safety precautions. In a cross-sectional study, we surveyed 332 nurses working in 4 hospitals, Nablus, West Bank, Palestine, by a questionnaire. Bivariate analysis tested the associations between ever exposure and the high likelihood of BBF exposure and the independent socio-demographic and occupational variables. Binary logistic regression analysis was used to assess the associations between the same two exposures and selected independent variables (those significant in the bivariate analysis). Prevalence of ever exposure to BBF was 51.7%, and was associated with working in private and charitable hospitals (OR 2.62, 2.68, respectively), having 4-6 family members (OR 0.52) and "nursing" being as one's top career choice at university (OR 0.48). The prevalence of high likelihood of BBF exposure was 62.2%, and was associated with working in charitable and private hospitals (OR 7.81, 2.43, respectively) and "nursing" being as one's top career choice (OR 0.57). Regarding knowledge, most respondents believed it is necessary to enact laws and regulations regarding occupational safety precautions, reported the use of sharps containers, immediate disinfection after an accident, reporting an accident, and using personal protective equipment. Nurses had adequate knowledge of the risks of their hospital work. Nevertheless, they exhibited high prevalence of exposure to BBF accidents. Future studies are needed to re-evaluate existing occupational safety guidelines in hospitals, establish monitoring and evaluation protocols for health care workers' adherence to the guidelines, and institute well-defined policies for reporting occupational injury incidents so these can be handled appropriately.

Safety Management Information Statistics (SAMIS) - 1995 Annual Report

DOT National Transportation Integrated Search

1997-04-01

The Safety Management Information Statistics 1995 Annual Report is a compilation and analysis of transit accident, casualty and crime statistics reported under the Federal Transit Administration's National Transit Database Reporting by transit system...

The role of PRA in the safety assessment of VVER Nuclear Power Plants in Ukraine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kot, C.

1999-05-10

Ukraine operates thirteen (13) Soviet-designed pressurized water reactors, VVERS. All Ukrainian plants are currently operating with annually renewable permits until they update their safety analysis reports (SARs), in accordance with new SAR content requirements issued in September 1995, by the Nuclear Regulatory Authority and the Government Nuclear Power Coordinating Committee of Ukraine. The requirements are in three major areas: design basis accident (DBA) analysis, probabilistic risk assessment (PRA), and beyond design-basis accident (BDBA) analysis. The last two requirements, on PRA and BDBA, are new, and the DBA requirements are an expanded version of the older SAR requirements. The US Departmentmore » of Energy (USDOE), as part of its Soviet-Designed Reactor Safety activities, is providing assistance and technology transfer to Ukraine to support their nuclear power plants (NPPs) in developing a Western-type technical basis for the new SARs. USDOE sponsored In-Depth Safety Assessments (ISAs) are in progress at three pilot nuclear reactor units in Ukraine, South Ukraine Unit 1, Zaporizhzhya Unit 5, and Rivne Unit 1, and a follow-on study has been initiated at Khmenytskyy Unit 1. The ISA projects encompass most areas of plant safety evaluation, but the initial emphasis is on performing a detailed, plant-specific Level 1 Internal Events PRA. This allows the early definition of the plant risk profile, the identification of risk significant accident sequences and plant vulnerabilities and provides guidance for the remainder of the safety assessments.« less

Identification and test of pedestrian safety messages for public education programs

DOT National Transportation Integrated Search

1975-03-01

A review of the literature and data from pedestrian accident research was used as input to an analysis which developed 14 message contents. Each of these is directed at a specific aspect of the identified pedestrian accident problem. Seven of the mes...

A Longitudinal Analysis of the Causal Factors in Major Maritime Accidents in the USA and Canada (1996-2006)

NASA Technical Reports Server (NTRS)

Johnson, C. W.; Holloway, C, M.

2007-01-01

Accident reports provide important insights into the causes and contributory factors leading to particular adverse events. In contrast, this paper provides an analysis that extends across the findings presented over ten years investigations into maritime accidents by both the US National Transportation Safety Board (NTSB) and Canadian Transportation Safety Board (TSB). The purpose of the study was to assess the comparative frequency of a range of causal factors in the reporting of adverse events. In order to communicate our findings, we introduce J-H graphs as a means of representing the proportion of causes and contributory factors associated with human error, equipment failure and other high level classifications in longitudinal studies of accident reports. Our results suggest the proportion of causal and contributory factors attributable to direct human error may be very much smaller than has been suggested elsewhere in the human factors literature. In contrast, more attention should be paid to wider systemic issues, including the managerial and regulatory context of maritime operations.

Actions to implement the recommendations of the Presidential Commission on the Space Shuttle Challenger Accident. Report to the President

NASA Technical Reports Server (NTRS)

1986-01-01

The status of the implementation of the recommendations of the Presidential Commission on the Space Shuttle Challenger Accident is reported. The implementation of recommendations in the following areas is detailed: (1) solid rocket motor design; (2) shuttle management structure, including the shuttle safety panel and astronauts in management; (3) critical item review and hazard analysis; (4) safety organization; (5) improved communication; (6) landing safety; (7) launch abort and crew escape; (8) flight rate; and (9) maintenance safeguards. Supporting memoranda and communications from NASA are appended.

Occupational safety management: the role of causal attribution.

PubMed

Gyekye, Seth Ayim

2010-12-01

The paper addresses the causal attribution theory, an old and well-established theme in social psychology which denotes the everyday, commonsense explanations that people use to explain events and the world around them. The attribution paradigm is considered one of the most appropriate analytical tools for exploratory and descriptive studies in social psychology and organizational literature. It affords the possibility of describing accident processes as objectively as possible and with as much detail as possible. Causal explanations are vital to the formal analysis of workplace hazards and accidents, as they determine how organizations act to prevent accident recurrence. Accordingly, they are regarded as fundamental and prerequisite elements for safety management policies. The paper focuses primarily on the role of causal attributions in occupational and industrial accident analyses and implementation of safety interventions. It thus serves as a review of the contribution of attribution theory to occupational and industrial accidents. It comprises six sections. The first section presents an introduction to the classic attribution theories, and the second an account of the various ways in which the attribution paradigm has been applied in organizational settings. The third and fourth sections review the literature on causal attributions and demographic and organizational variables respectively. The sources of attributional biases in social psychology and how they manifest and are identified in the causal explanations for industrial and occupational accidents are treated in the fifth section. Finally, conclusion and recommendations are presented. The recommendations are particularly important for the reduction of workplace accidents and associated costs. The paper touches on the need for unbiased causal analyses, belief in the preventability of accidents, and the imperative role of management in occupational safety management.

Dynamic safety assessment of natural gas stations using Bayesian network.

PubMed

Zarei, Esmaeil; Azadeh, Ali; Khakzad, Nima; Aliabadi, Mostafa Mirzaei; Mohammadfam, Iraj

2017-01-05

Pipelines are one of the most popular and effective ways of transporting hazardous materials, especially natural gas. However, the rapid development of gas pipelines and stations in urban areas has introduced a serious threat to public safety and assets. Although different methods have been developed for risk analysis of gas transportation systems, a comprehensive methodology for risk analysis is still lacking, especially in natural gas stations. The present work is aimed at developing a dynamic and comprehensive quantitative risk analysis (DCQRA) approach for accident scenario and risk modeling of natural gas stations. In this approach, a FMEA is used for hazard analysis while a Bow-tie diagram and Bayesian network are employed to model the worst-case accident scenario and to assess the risks. The results have indicated that the failure of the regulator system was the worst-case accident scenario with the human error as the most contributing factor. Thus, in risk management plan of natural gas stations, priority should be given to the most probable root events and main contribution factors, which have identified in the present study, in order to reduce the occurrence probability of the accident scenarios and thus alleviate the risks. Copyright © 2016 Elsevier B.V. All rights reserved.

Occupational injuries in the Finnish furniture industry.

PubMed

Aaltonen, M V

1996-06-01

The purpose of the study was to determine the types of occupational injuries that occur in the Finnish furniture industry and to see whether they differ as regards production type and company size. During a one-year registration period accident events, the actual and potential severity of the injuries, the causes of the accidents, and the measures needed to prevent such accidents were examined in 18 Finnish furniture factories of different types. An analysis of covariance determined the variables affecting the actual and potential severity of the injuries. The 214 accidents registered were lost-time injuries; two of them resulted in slight partial loss of fingertips. The disabling injury rate was 14.4 per 100 workers per year. Wooden furniture production and kitchen cupboard production in large companies had the highest rate. Accidents involving machines comprised half of the material. Saws were the most common machine type. Forty-two percent of the injuries could have been more severe; one injury could have been fatal. The injured persons and their foremen identified the causal factors of the accidents and the needed safety countermeasures well. Sixty-six percent of the causes and 65% of the safety countermeasures were associated with the actions of the workers and the workplace procedures. Nevertheless, only 6% of the identified safety countermeasures were put into force. It was estimated that, in 1987, 2000 on-site accidents leading to at least first-aid at some health care center occurred in the Finnish furniture industry. Special efforts should be taken to improve safety in furniture production in Finland.

Geotechnical approach for occupational safety risk analysis of critical slope in open pit mining as implication for earthquake hazard

NASA Astrophysics Data System (ADS)

Munirwansyah; Irsyam, Masyhur; Munirwan, Reza P.; Yunita, Halida; Zulfan Usrina, M.

2018-05-01

Occupational safety and health (OSH) is a planned effort to prevent accidents and diseases caused by work. In conducting mining activities often occur work accidents caused by unsafe field conditions. In open mine area, there is often a slump due to unstable slopes, which can disrupt the activities and productivity of mining companies. Based on research on stability of open pit slopes conducted by Febrianti [8], the Meureubo coal mine located in Aceh Barat district, on the slope of mine was indicated unsafe slope conditions, it will be continued research on OSH for landslide which is to understand the stability of the excavation slope and the shape of the slope collapse. Plaxis software was used for this research. After analyzing the slope stability and the effect of landslide on OSH with Job Safety Analysis (JSA) method, to identify the hazard to work safety, risk management analysis will be conducted to classified hazard level and its handling technique. This research aim is to know the level of risk of work accident at the company and its prevention effort. The result of risk analysis research is very high-risk value that is > 350 then the activity must be stopped until the risk can be reduced to reach the risk value limit < 20 which is allowed or accepted.

Safety Management Information Statistics (SAMIS) - 1993 Annual Report

DOT National Transportation Integrated Search

1995-05-01

The 1993 Safety Management Information Statistics (SAMIS) report, now in its fourth year of publication, is a compilation and analysis of transit accident and casualty statistics uniformly collected from approximately 400 transit agencies throughout ...

Root causes and impacts of severe accidents at large nuclear power plants.

PubMed

Högberg, Lars

2013-04-01

The root causes and impacts of three severe accidents at large civilian nuclear power plants are reviewed: the Three Mile Island accident in 1979, the Chernobyl accident in 1986, and the Fukushima Daiichi accident in 2011. Impacts include health effects, evacuation of contaminated areas as well as cost estimates and impacts on energy policies and nuclear safety work in various countries. It is concluded that essential objectives for reactor safety work must be: (1) to prevent accidents from developing into severe core damage, even if they are initiated by very unlikely natural or man-made events, and, recognizing that accidents with severe core damage may nevertheless occur; (2) to prevent large-scale and long-lived ground contamination by limiting releases of radioactive nuclides such as cesium to less than about 100 TBq. To achieve these objectives the importance of maintaining high global standards of safety management and safety culture cannot be emphasized enough. All three severe accidents discussed in this paper had their root causes in system deficiencies indicative of poor safety management and poor safety culture in both the nuclear industry and government authorities.

Introduction of Bayesian network in risk analysis of maritime accidents in Bangladesh

NASA Astrophysics Data System (ADS)

Rahman, Sohanur

2017-12-01

Due to the unique geographic location, complex navigation environment and intense vessel traffic, a considerable number of maritime accidents occurred in Bangladesh which caused serious loss of life, property and environmental contamination. Based on the historical data of maritime accidents from 1981 to 2015, which has been collected from Department of Shipping (DOS) and Bangladesh Inland Water Transport Authority (BIWTA), this paper conducted a risk analysis of maritime accidents by applying Bayesian network. In order to conduct this study, a Bayesian network model has been developed to find out the relation among parameters and the probability of them which affect accidents based on the accident investigation report of Bangladesh. Furthermore, number of accidents in different categories has also been investigated in this paper. Finally, some viable recommendations have been proposed in order to ensure greater safety of inland vessels in Bangladesh.

Extracting decision rules from police accident reports through decision trees.

PubMed

de Oña, Juan; López, Griselda; Abellán, Joaquín

2013-01-01

Given the current number of road accidents, the aim of many road safety analysts is to identify the main factors that contribute to crash severity. To pinpoint those factors, this paper shows an application that applies some of the methods most commonly used to build decision trees (DTs), which have not been applied to the road safety field before. An analysis of accidents on rural highways in the province of Granada (Spain) between 2003 and 2009 (both inclusive) showed that the methods used to build DTs serve our purpose and may even be complementary. Applying these methods has enabled potentially useful decision rules to be extracted that could be used by road safety analysts. For instance, some of the rules may indicate that women, contrary to men, increase their risk of severity under bad lighting conditions. The rules could be used in road safety campaigns to mitigate specific problems. This would enable managers to implement priority actions based on a classification of accidents by types (depending on their severity). However, the primary importance of this proposal is that other databases not used here (i.e. other infrastructure, roads and countries) could be used to identify unconventional problems in a manner easy for road safety managers to understand, as decision rules. Copyright © 2012 Elsevier Ltd. All rights reserved.

Safety assessment methodology in management of spent sealed sources.

PubMed

Mahmoud, Narmine Salah

2005-02-14

Environmental hazards can be caused from radioactive waste after their disposal. It was therefore important that safety assessment methodologies be developed and established to study and estimate the possible hazards, and institute certain safety methodologies that lead and prevent the evolution of these hazards. Spent sealed sources are specific type of radioactive waste. According to IAEA definition, spent sealed sources are unused sources because of activity decay, damage, misuse, loss, or theft. Accidental exposure of humans from spent sealed sources can occur at the moment they become spent and before their disposal. Because of that reason, safety assessment methodologies were tailored to suit the management of spent sealed sources. To provide understanding and confidence of this study, validation analysis was undertaken by considering the scenario of an accident that occurred in Egypt, June 2000 (the Meet-Halfa accident from an iridium-192 source). The text of this work includes consideration related to the safety assessment approaches of spent sealed sources which constitutes assessment context, processes leading an active source to be spent, accident scenarios, mathematical models for dose calculations, and radiological consequences and regulatory criteria. The text also includes a validation study, which was carried out by evaluating a theoretical scenario compared to the real scenario of Meet-Halfa accident depending on the clinical assessment of affected individuals.

41 CFR 102-80.110 - What must an equivalent level of safety analysis indicate?

Code of Federal Regulations, 2014 CFR

2014-01-01

..., and reliability of all building systems impacting fire growth, occupant knowledge of the fire, and... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety...

41 CFR 102-80.110 - What must an equivalent level of safety analysis indicate?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., and reliability of all building systems impacting fire growth, occupant knowledge of the fire, and... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety...

41 CFR 102-80.110 - What must an equivalent level of safety analysis indicate?

Code of Federal Regulations, 2011 CFR

2011-01-01

..., and reliability of all building systems impacting fire growth, occupant knowledge of the fire, and... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety...

41 CFR 102-80.110 - What must an equivalent level of safety analysis indicate?

Code of Federal Regulations, 2012 CFR

2012-01-01

..., and reliability of all building systems impacting fire growth, occupant knowledge of the fire, and... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety...

Development of a large truck safety data needs study plan. Vol. 1, Summary

DOT National Transportation Integrated Search

1986-02-01

This report discusses the results of a study to determine the data needs necessary to address truck safety issues and to develop a data collection and analysis plan. Priority truck safety issues that are amenable to truck accident data analyses were ...

Analysis on influencing factors and decision-making of pedestrian crossing at intersections

NASA Astrophysics Data System (ADS)

Liu, Likun; Wang, Ziyang

2017-10-01

The city signal intersection always has complex traffic flow and many traffic accidents. As vulnerable participants, the proportion of traffic accidents involving pedestrians remain high. And a lot of insecure crossing behavior seriously reduce the safety of the intersection. Therefore, it is necessary to carry out in-depth study on the traversing characteristics of pedestrians, reveal the inherent laws of pedestrian crossing, and then put forward targeted measures to improve pedestrian traffic environment, protect pedestrian crossing safety and improve traffic efficiency.

49 CFR 195.50 - Reporting accidents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Reporting accidents. 195.50 Section 195.50 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An accident...

49 CFR 195.50 - Reporting accidents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Reporting accidents. 195.50 Section 195.50 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.50 Reporting accidents. An accident...

Balloon crash damage and injuries: an analysis of 86 accidents, 2000-2004.

PubMed

de Voogt, Alexander J; van Doorn, Robert R A

2006-05-01

General aviation accounts for the majority of aviation crashes and casualties in the United States. The role of ballooning in these statistics is not regularly studied. Since 2001, the National Transportation and Safety Board has made its accident reports more readily available, which presents opportunities for further study. This study analyzes and compares a 5-yr period of accident reports and includes an analysis of injuries and balloon damage in hot-air and gas balloon accidents. Balloon crash 2-page briefs and 5-page accident reports published by the National Transportation and Safety Board for the 5-yr time period 2000-2004 were examined. Data collected in the investigation of these crashes were analyzed and compared with the epidemiological data collected in earlier research. In 86 crashes during a 5-yr period, there were 4 fatalities and 75 people were seriously injured. Only one accident was reported involving a student pilot. Broken ankles and legs have been the most commonly recorded serious injury, but could not be linked to the severity of damage to the balloon. The absence of student pilot accidents may be explained by possible stricter supervision. Balloon basket and envelopes appear of sufficient quality to withstand crashes, but improving the protection of passengers during hard landings should help to decrease the number of serious injuries in ballooning.

Safety and health practice among laboratory staff in Malaysian education sector

NASA Astrophysics Data System (ADS)

Husna Che Hassan, Nurul; Rasdan Ismail, Ahmad; Kamilah Makhtar, Nor; Azwadi Sulaiman, Muhammad; Syuhadah Subki, Noor; Adilah Hamzah, Noor

2017-10-01

Safety is the most important issue in industrial sector such as construction and manufacturing. Recently, the increasing number of accident cases reported involving school environment shows the important of safety issues in education sector. Safety awareness among staff in this sector is crucial in order to find out the method to prevent the accident occurred in future. This study was conducted to analyze the knowledge of laboratory staff in term of safety and health practice in laboratory. Survey questionnaires were distributing among 255 of staff laboratory from ten District Education Offices in Kelantan. Descriptive analysis shows that the understanding of safety and health practice are low while doing some job activities in laboratory. Furthermore, some of the staff also did not implemented safety practice that may contribute to unplanned event occur in laboratory. Suggestion that the staff at laboratory need to undergo on Occupational Safety and Health training to maintain and create safe environment in workplaces.

A cluster analysis on road traffic accidents using genetic algorithms

NASA Astrophysics Data System (ADS)

Saharan, Sabariah; Baragona, Roberto

2017-04-01

The analysis of traffic road accidents is increasingly important because of the accidents cost and public road safety. The availability or large data sets makes the study of factors that affect the frequency and severity accidents are viable. However, the data are often highly unbalanced and overlapped. We deal with the data set of the road traffic accidents recorded in Christchurch, New Zealand, from 2000-2009 with a total of 26440 accidents. The data is in a binary set and there are 50 factors road traffic accidents with four level of severity. We used genetic algorithm for the analysis because we are in the presence of a large unbalanced data set and standard clustering like k-means algorithm may not be suitable for the task. The genetic algorithm based on clustering for unknown K, (GCUK) has been used to identify the factors associated with accidents of different levels of severity. The results provided us with an interesting insight into the relationship between factors and accidents severity level and suggest that the two main factors that contributes to fatal accidents are "Speed greater than 60 km h" and "Did not see other people until it was too late". A comparison with the k-means algorithm and the independent component analysis is performed to validate the results.

Strategies for improving safety performance in construction firms.

PubMed

Alarcón, Luis Fernando; Acuña, Diego; Diethelm, Sven; Pellicer, Eugenio

2016-09-01

Over the years many prevention management practices have been implemented to prevent and mitigate accidents at the construction site. However, there is little evidence of the effectiveness of individual or combined practices used by companies to manage occupational health and safety issues. The authors selected a sample of 1180 construction firms and 221 individual practices applied in these companies to analyze their effectiveness reducing injury rates over a period of four years in Chile. Different methods were used to study this massive database including: visual analyses of graphical information, statistical analyses and classification techniques. Results showed that practices related to safety incentives and rewards are the most effective from the accident rate viewpoint, even though they are seldom used by companies; on the other hand, practices related to accidents and incidents investigation had a slight negative impact on the accident rate because they are frequently used as a reactive measure. In general, the higher the percentage of prevention practices implemented in a strategy, the lower the accident rate. However, the analysis of the combined effect of prevention practices indicated that the choice of the right combination of practices was more important than just the number of practices implemented. Copyright © 2016 Elsevier Ltd. All rights reserved.

The relationships between OHS prevention costs, safety performance, employee satisfaction and accident costs.

PubMed

Bayram, Metin; Ünğan, Mustafa C; Ardıç, Kadir

2017-06-01

Little is known about the costs of safety. A literature review conducted for this study indicates there is a lack of survey-based research dealing with the effects of occupational health and safety (OHS) prevention costs. To close this gap in the literature, this study investigates the interwoven relationships between OHS prevention costs, employee satisfaction, OHS performance and accident costs. Data were collected from 159 OHS management system 18001-certified firms operating in Turkey and analyzed through structural equation modeling. The findings indicate that OHS prevention costs have a significant positive effect on safety performance, employee satisfaction and accident costs savings; employee satisfaction has a significant positive effect on accident costs savings; and occupational safety performance has a significant positive effect on employee satisfaction and accident costs savings. Also, the results indicate that safety performance and employee satisfaction leverage the relationship between prevention costs and accident costs.

Safety illusion and error trap in a collectively-operated machine accident.

PubMed

de Almeida, Ildeberto Muniz; Nobre, Hildeberto; do Amaral Dias, Maria Dionísia; Vilela, Rodolfo Andrade Gouveia

2012-01-01

Workplace accidents involving machines are relevant for their magnitude and their impacts on worker health. Despite consolidated critical statements, explanation centered on errors of operators remains predominant with industry professionals, hampering preventive measures and the improvement of production-system reliability. Several initiatives were adopted by enforcement agencies in partnership with universities to stimulate production and diffusion of analysis methodologies with a systemic approach. Starting from one accident case that occurred with a worker who operated a brake-clutch type mechanical press, the article explores cognitive aspects and the existence of traps in the operation of this machine. It deals with a large-sized press that, despite being endowed with a light curtain in areas of access to the pressing zone, did not meet legal requirements. The safety devices gave rise to an illusion of safety, permitting activation of the machine when a worker was still found within the operational zone. Preventive interventions must stimulate the tailoring of systems to the characteristics of workers, minimizing the creation of traps and encouraging safety policies and practices that replace judgments of behaviors that participate in accidents by analyses of reasons that lead workers to act in that manner.

Analysis of cost regression and post-accident absence

NASA Astrophysics Data System (ADS)

Wojciech, Drozd

2017-07-01

The article presents issues related with costs of work safety. It proves the thesis that economic aspects cannot be overlooked in effective management of occupational health and safety and that adequate expenditures on safety can bring tangible benefits to the company. Reliable analysis of this problem is essential for the description the problem of safety the work. In the article attempts to carry it out using the procedures of mathematical statistics [1, 2, 3].

Analysis and prediction of spatiotemporal impact of traffic incidents for better mobility and safety in transportation systems.

DOT National Transportation Integrated Search

2015-12-01

The goal of this research is to develop a machine learning framework to predict the spatiotemporal impact : of traffic accidents on the upstream traffic and surrounding region. The main objective of the framework : is, given a road accident, to forec...

Toward an understanding of the impact of production pressure on safety performance in construction operations.

PubMed

Han, Sanguk; Saba, Farzaneh; Lee, Sanghyun; Mohamed, Yasser; Peña-Mora, Feniosky

2014-07-01

It is not unusual to observe that actual schedule and quality performances are different from planned performances (e.g., schedule delay and rework) during a construction project. Such differences often result in production pressure (e.g., being pressed to work faster). Previous studies demonstrated that such production pressure negatively affects safety performance. However, the process by which production pressure influences safety performance, and to what extent, has not been fully investigated. As a result, the impact of production pressure has not been incorporated much into safety management in practice. In an effort to address this issue, this paper examines how production pressure relates to safety performance over time by identifying their feedback processes. A conceptual causal loop diagram is created to identify the relationship between schedule and quality performances (e.g., schedule delays and rework) and the components related to a safety program (e.g., workers' perceptions of safety, safety training, safety supervision, and crew size). A case study is then experimentally undertaken to investigate this relationship with accident occurrence with the use of data collected from a construction site; the case study is used to build a System Dynamics (SD) model. The SD model, then, is validated through inequality statistics analysis. Sensitivity analysis and statistical screening techniques further permit an evaluation of the impact of the managerial components on accident occurrence. The results of the case study indicate that schedule delays and rework are the critical factors affecting accident occurrence for the monitored project. Copyright © 2013 Elsevier Ltd. All rights reserved.

Safety Management Information Statistics (SAMIS) - 1991 Annual Report

DOT National Transportation Integrated Search

1993-02-01

The Safety Management Information Statistics 1991 Annual Report is a compilation and analysis of mass transit accident and casualty statistics reported by transit systems in the United States during 1991, under FTA's Section 15 reporting system.

Safety Management Information Statistics (SAMIS) - 1994 Annual Report

DOT National Transportation Integrated Search

1996-07-01

The Safety Management Information Statistics 1994 Annual Report is a compilation and analysis of mass transit accident and casualty statistics reported by transit systems in the United States during 1994, reported under the Federal Transit Administra...

A study of NASA occupational injuries and property damage at Goddard Space Flight Center, Langley Research Center and Headquarters

NASA Technical Reports Server (NTRS)

1976-01-01

Analysis of NASA's accident/injury/illness and health data was performed. The analysis included: (1) an on-site study of the existing data; (2) evaluation of the findings to develop criteria for the subsequent implementation of safety and health standards; (3) preparation of a graphical loss control assessment; and (4) recommendations to reduce accident rates.

The SAS4A/SASSYS-1 Safety Analysis Code System, Version 5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fanning, T. H.; Brunett, A. J.; Sumner, T.

The SAS4A/SASSYS-1 computer code is developed by Argonne National Laboratory for thermal, hydraulic, and neutronic analysis of power and flow transients in liquidmetal- cooled nuclear reactors (LMRs). SAS4A was developed to analyze severe core disruption accidents with coolant boiling and fuel melting and relocation, initiated by a very low probability coincidence of an accident precursor and failure of one or more safety systems. SASSYS-1, originally developed to address loss-of-decay-heat-removal accidents, has evolved into a tool for margin assessment in design basis accident (DBA) analysis and for consequence assessment in beyond-design-basis accident (BDBA) analysis. SAS4A contains detailed, mechanistic models of transientmore » thermal, hydraulic, neutronic, and mechanical phenomena to describe the response of the reactor core, its coolant, fuel elements, and structural members to accident conditions. The core channel models in SAS4A provide the capability to analyze the initial phase of core disruptive accidents, through coolant heat-up and boiling, fuel element failure, and fuel melting and relocation. Originally developed to analyze oxide fuel clad with stainless steel, the models in SAS4A have been extended and specialized to metallic fuel with advanced alloy cladding. SASSYS-1 provides the capability to perform a detailed thermal/hydraulic simulation of the primary and secondary sodium coolant circuits and the balance-ofplant steam/water circuit. These sodium and steam circuit models include component models for heat exchangers, pumps, valves, turbines, and condensers, and thermal/hydraulic models of pipes and plena. SASSYS-1 also contains a plant protection and control system modeling capability, which provides digital representations of reactor, pump, and valve controllers and their response to input signal changes.« less

Type A behavior pattern, accident optimism and fatalism: an investigation into non-compliance with safety work behaviors among hospital nurses.

PubMed

Ugwu, Fabian O; Onyishi, Ike E; Ugwu, Chidi; Onyishi, Charity N

2015-01-01

Safety work behavior has continued to attract the interest of organizational researchers and practitioners especially in the health sector. The goal of the study was to investigate whether personality type A, accident optimism and fatalism could predict non-compliance with safety work behaviors among hospital nurses. One hundred and fifty-nine nursing staff sampled from three government-owned hospitals in a state in southeast Nigeria, participated in the study. Data were collected through Type A Behavior Scale (TABS), Accident Optimism, Fatalism and Compliance with Safety Behavior (CSB) Scales. Our results showed that personality type A, accident optimism and fatalism were all related to non-compliance with safety work behaviors. Personality type A individuals tend to comply less with safety work behaviors than personality type B individuals. In addition, optimistic and fatalistic views about accidents and existing safety rules also have implications for compliance with safety work behaviors.

Construction safety monitoring based on the project's characteristic with fuzzy logic approach

NASA Astrophysics Data System (ADS)

Winanda, Lila Ayu Ratna; Adi, Trijoko Wahyu; Anwar, Nadjadji; Wahyuni, Febriana Santi

2017-11-01

Construction workers accident is the highest number compared with other industries and falls are the main cause of fatal and serious injuries in high rise projects. Generally, construction workers accidents are caused by unsafe act and unsafe condition that can occur separately or together, thus a safety monitoring system based on influencing factors is needed to achieve zero accident in construction industry. The dynamic characteristic in construction causes high mobility for workers while doing the task, so it requires a continuously monitoring system to detect unsafe condition and to protect workers from potential hazards. In accordance with the unique nature of project, fuzzy logic approach is one of the appropriate methods for workers safety monitoring on site. In this study, the focus of discussion is based on the characteristic of construction projects in analyzing "potential hazard" and the "protection planning" to be used in accident prevention. The data have been collected from literature review, expert opinion and institution of safety and health. This data used to determine hazard identification. Then, an application model is created using Delphi programming. The process in fuzzy is divided into fuzzification, inference and defuzzification, according to the data collection. Then, the input and final output data are given back to the expert for assessment as a validation of application model. The result of the study showed that the potential hazard of construction workers accident could be analysed based on characteristic of project and protection system on site and fuzzy logic approach can be used for construction workers accident analysis. Based on case study and the feedback assessment from expert, it showed that the application model can be used as one of the safety monitoring tools.

41 CFR 102-80.110 - What must an equivalent level of safety analysis indicate?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What must an equivalent... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety...

An Examination of Commercial Motor Vehicle Hours of Service Safety Regulation

DTIC Science & Technology

2016-09-01

enough data for a statistical analysis of its effects on truck driver safety. This research found that by comparing truck driving safety data prior...impact on the commercial motor vehicle industry. Research has demonstrated how fatigue leads to increased accident rates by decreasing reaction time

Directory of aerospace safety specialized information sources

NASA Technical Reports Server (NTRS)

Fullerton, E. A.; Rubens, L. S.; Mandel, G.; Mckenna, P. J.

1974-01-01

Directory aids safety specialists in locating information sources and individual experts in engineering-related fields. Lists 170 organizations and approximately 300 individuals who can provide safety-related technical information in form of documentation, data, and consulting expertise. Information on hazard and failure cause identification, accident analysis, and materials characteristics are covered.

'Remixing Rasmussen': The evolution of Accimaps within systemic accident analysis.

PubMed

Waterson, Patrick; Jenkins, Daniel P; Salmon, Paul M; Underwood, Peter

2017-03-01

Throughout Jens Rasmussen's career there has been a continued emphasis on the development of methods, techniques and tools for accident analysis and investigation. In this paper we focus on the evolution and development of one specific example, namely Accimaps and their use for accident analysis. We describe the origins of Accimaps followed by a review of 27 studies which have applied and adapted Accimaps over the period 2000-2015 to a range of domains and types of accident. Aside from demonstrating the versatility and popularity of the method, part of the motivation for the review of the use of Accimaps is to address the question of what constitutes a sound, usable, valid and reliable approach to systemic accident analysis. The findings from the review demonstrate continuity with the work carried out by Rasmussen, as well as significant variation (e.g., changes to the Accimap, used of additional theoretical and practice-oriented perspectives on safety). We conclude the paper with some speculations regarding future extension and adaptation of the Accimap approach including the possibility of using hybrid models for accident analysis. Copyright © 2016 Elsevier Ltd. All rights reserved.

Safety climate in university and college laboratories: impact of organizational and individual factors.

PubMed

Wu, Tsung-Chih; Liu, Chi-Wei; Lu, Mu-Chen

2007-01-01

Universities and colleges serve to be institutions of education excellence; however, problems in the areas of occupational safety may undermine such goals. Occupational safety must be the concern of every employee in the organization, regardless of job position. Safety climate surveys have been suggested as important tools for measuring the effectiveness and improvement direction of safety programs. Thus, this study aims to investigate the influence of organizational and individual factors on safety climate in university and college laboratories. Employees at 100 universities and colleges in Taiwan were mailed a self-administered questionnaire survey; the response rate was 78%. Multivariate analysis of variance revealed that organizational category of ownership, the presence of a safety manager and safety committee, gender, age, title, accident experience, and safety training significantly affected the climate. Among them, accident experience and safety training affected the climate with practical significance. The authors recommend that managers should address important factors affecting safety issues and then create a positive climate by enforcing continuous improvements.

Road Safety Barriers, the Need and Influence on Road Traffic Accidents

NASA Astrophysics Data System (ADS)

Butāns, Ž.; Gross, K. A.; Gridnevs, A.; Karzubova, E.

2015-11-01

Constantly increasing intensity of road traffic and the allowed speed limits seem to impose stronger requirements on road infrastructure and use of road safety systems. One of the ways to improve road safety is the use of road restraint systems. Road safety barriers allow not only reducing the number of road traffic accidents, but also lowering the severity of accidents. The paper provides information on the technical requirements of road safety barriers. Various types of road safety barriers and their selection criteria for different types of road sections are discussed. The article views an example of a road traffic accident, which is also modelled by PC-Crash computer program. The given example reflects a road accident mechanism in case of a car-to-barrier collision, and provides information about the typical damage to the car and the barrier. The paper describes an impact of the road safety barrier type and its presence on the road traffic accident mechanism. Implementation and maintenance costs of different barrier types are viewed. The article presents a discussion on the necessity to use road safety barriers, as well as their optimal choice.

Meta-analysis of the effect of road safety campaigns on accidents.

PubMed

Phillips, Ross Owen; Ulleberg, Pål; Vaa, Truls

2011-05-01

A meta-analysis of 67 studies evaluating the effect of road safety campaigns on accidents is reported. A total of 119 results were extracted from the studies, which were reported in 12 different countries between 1975 and 2007. After allowing for publication bias and heterogeneity of effects, the weighted average effect of road safety campaigns is a 9% reduction in accidents (with 95% confidence that the weighted average is between -12 and -6%). To account for the variability of effects measured across studies, data were collected to characterise aspects of the campaign and evaluation design associated with each effect, and analysed to identify a model of seven campaign factors for testing by meta-regression. The model was tested using both fixed and random effect meta-regression, and dependency among effects was accounted for by aggregation. These analyses suggest positive associations between accident reduction and the use of personal communication or roadside media as part of a campaign delivery strategy. Campaigns with a drink-driving theme were also associated with greater accident reductions, while some of the analyses suggested that accompanying enforcement and short campaign duration (less than one month) are beneficial. Overall the results are consistent with the idea that campaigns can be more effective in the short term if the message is delivered with personal communication in a way that is proximal in space and time to the behaviour targeted by the campaign. Copyright © 2011 Elsevier Ltd. All rights reserved.

Glider accidents: an analysis of 143 cases, 2001-2005.

PubMed

van Doorn, Robert R A; de Voogt, Alexander J

2007-01-01

The majority of aviation crashes and casualties take place in general and sport aviation. Although gliding has gained popularity in recent decades, we could find no systematic analysis of glider accidents. This study determined factors associated with both non-fatal and fatal glider accidents to document their position within sport and general aviation accidents, and to suggest preventive measures and improvements. We performed a retrospective review of glider accidents for the period 2001-2005 in the database maintained by the U.S. National Transportation Safety Board (NTSB). A total of 117 non-fatal and 26 fatal glider accidents were reported for the 5-yr period. Adverse weather was the cause in 20% of all non-fatal accidents, 60% of which occurred in the cruise phase. Logistic regression revealed that fatal accidents were predicted by pilot error, flight phase, and home-built aircraft. Factors contributing to glider crashes are specific to this type of sport aviation. Owners of home-built gliders should pay particular attention to the aircraft's specifications and design limits.

Identification of Behavior Based Safety by Using Traffic Light Analysis to Reduce Accidents

NASA Astrophysics Data System (ADS)

Mansur, A.; Nasution, M. I.

2016-01-01

This work present the safety assessment of a case study and describes an important area within the field production in oil and gas industry, namely behavior based safety (BBS). The company set a rigorous BBS and its intervention program that implemented and deployed continually. In this case, observers requested to have discussion and spread a number of determined questions related with work behavior to the workers during observation. Appraisal of Traffic Light Analysis (TLA) as one tools of risk assessment used to determine the estimated score of BBS questionnaire. Standardization of TLA appraisal in this study are based on Regulation of Minister of Labor and Occupational Safety and Health No:PER.05/MEN/1996. The result shown that there are some points under 84%, which categorized in yellow category and should corrected immediately by company to prevent existing bad behavior of workers. The application of BBS expected to increase the safety performance at work time-by-time and effective in reducing accidents.

Final safety analysis report for the Galileo mission: Volume 3 (Book 2), Nuclear risk analysis document: Appendices: Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-01-25

It is the purpose of the NRAD to provide an analysis of the range of potential consequences of accidents which have been identified that are associated with the launching and deployment of the Galileo mission spacecraft. The specific consequences analyzed are those associated with the possible release of radioactive material (fuel) of the Radioisotope Thermoelectric Generators (RTGs). They are in terms of radiation doses to people and areas of deposition of radioactive material. These consequence analyses can be used in several ways. One way is to identify the potential range of consequences which might have to be dealt with ifmore » there were to be an accident with a release of fuel, so as to assure that, given such an accident, the health and safety of the public will be reasonably protected. Another use of the information, in conjunction with accident and release probabilities, is to estimate the risks associated with the mission. That is, most space launches occur without incident. Given an accident, the most probable result relative to the RTGs is complete containment of the radioactive material. Only a small fraction of accidents might result in a release of fuel and subsequent radiological consequences. The combination of probability with consequence is risk, which can be compared to other human and societal risks to assure that no undue risks are implied by undertaking the mission. Book 2 contains eight appendices.« less

Predicting and analyzing the trend of traffic accidents deaths in Iran in 2014 and 2015.

PubMed

Mehmandar, Mohammadreza; Soori, Hamid; Mehrabi, Yadolah

2016-01-01

Predicting the trend in traffic accidents deaths and its analysis can be a useful tool for planning and policy-making, conducting interventions appropriate with death trend, and taking the necessary actions required for controlling and preventing future occurrences. Predicting and analyzing the trend of traffic accidents deaths in Iran in 2014 and 2015. It was a cross-sectional study. All the information related to fatal traffic accidents available in the database of Iran Legal Medicine Organization from 2004 to the end of 2013 were used to determine the change points (multi-variable time series analysis). Using autoregressive integrated moving average (ARIMA) model, traffic accidents death rates were predicted for 2014 and 2015, and a comparison was made between this rate and the predicted value in order to determine the efficiency of the model. From the results, the actual death rate in 2014 was almost similar to that recorded for this year, while in 2015 there was a decrease compared with the previous year (2014) for all the months. A maximum value of 41% was also predicted for the months of January and February, 2015. From the prediction and analysis of the death trends, proper application and continuous use of the intervention conducted in the previous years for road safety improvement, motor vehicle safety improvement, particularly training and culture-fostering interventions, as well as approval and execution of deterrent regulations for changing the organizational behaviors, can significantly decrease the loss caused by traffic accidents.

Safety analysis report for the Galileo Mission. Volume 3, book 2: Nuclear risk analysis document. Appendices, revision 1

NASA Astrophysics Data System (ADS)

1989-01-01

It is the purpose of the NRAD to provide an analysis of the range of potential consequences of accidents which have been identified that are associated with the launching and deployment of the Galileo mission spacecraft. The specific consequences analyzed are those associated with the possible release of radioactive material (fuel) of the Radioisotope Thermoelectric Generators (RTGs). They are in terms of radiation doses to people and areas of deposition of radioactive material. These consequence analyses can be used in several ways. One way is to identify the potential range of consequences which might have to be dealt with if there were to be an accident with a release of fuel, so as to assure that, given such an accident, the health and safety of the public will be reasonably protected. Another use of the information, in conjunction with accident and release probabilities, is to estimate the risks associated with the mission. That is, most space launches occur without incident. Given an accident, the most probable result relative to the RTGs is complete containment of the radioactive material. Only a small fraction of accidents might result in a release of fuel and subsequent radiological consequences. The combination of probability with consequence is risk, which can be compared to other human and societal risks to assure that no undue risks are implied by undertaking the mission. Book 2 contains eight appendices.

Conceptual design study of Fusion Experimental Reactor (FY86 FER): Safety

NASA Astrophysics Data System (ADS)

Seki, Yasushi; Iida, Hiromasa; Honda, Tsutomu

1987-08-01

This report describes the study on safety for FER (Fusion Experimental Reactor) which has been designed as a next step machine to the JT-60. Though the final purpose of this study is to have an image of design base accident, maximum credible accident and to assess their risk or probability, etc., as FER plant system, the emphasis of this years study is placed on fuel-gas circulation system where the tritium inventory is maximum. The report consists of two chapters. The first chapter summarizes the FER system and describes FMEA (Failure Mode and Effect Analysis) and related accident progression sequence for FER plant system as a whole. The second chapter of this report is focused on fuel-gas circulation system including purification, isotope separation and storage. Probability of risk is assessed by the probabilistic risk analysis (PRA) procedure based on FMEA, ETA and FTA.

Experimental field test of proposed pedestrian safety messages. Volume 3

DOT National Transportation Integrated Search

1983-11-01

Author's abstract: A detailed re-analysis of available pedestrian accident data was utilized to define three sets of pedestrian safety public information and education (PI&E) Messages. These messages were then produced and field tested. The objective...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2010 CFR

2010-01-01

... analysis of the structures, systems, and components of the reactor to be manufactured, with emphasis upon... assumed for this evaluation should be based upon a major accident, hypothesized for purposes of site... structures, systems, and components with the objective of assessing the risk to public health and safety...

Safety Climate and Occupational Stress According to Occupational Accidents Experience and Employment Type in Shipbuilding Industry of Korea.

PubMed

Kim, Kyung Woo; Park, Sung Jin; Lim, Hae Sun; Cho, Hm Hak

2017-09-01

Safety climate and occupational stress are related with occupational accident. The present study tried to identify the differences in safety climate and occupational stress according to occupational accidents experience and employment type (e.g., direct workers and subcontract workers). In this study, we conducted a survey using safety climate scale and Korean Occupational Stress Scale and classified the participants into four groups: direct workers working for accident-free departments, direct workers working for accident departments, subcontract workers working for accident-free departments, and subcontract workers working for accident departments for 2 years within the same workplace in the shipbuilding industry. The direct workers and subcontract workers showed diverse results in subscales of safety climate and occupational stress. This result is supported by existing studies; however, further study is necessary for more supporting evidence and elaborative methodological approach. The necessity of management for safety climate and psychosocial factor such as occupational stress for both direct workers and subcontract workers as a whole is suggested by this study.

One in a Million Given the Accident: Assuring Nuclear Weapon Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weaver, Jason

2015-08-25

Since the introduction of nuclear weapons, there has not been a single instance of accidental or unauthorized nuclear detonation, but there have been numerous accidents and “close calls.” As the understanding of these environments has increased, the need for a robust nuclear weapon safety philosophy has grown. This paper describes some of the methods used by the Nuclear Weapon Complex today to assure nuclear weapon safety, including testing, modeling, analysis, and design features. Lastly, it also reviews safety’s continued role in the future and examines how nuclear safety’s present maturity can play a role in strengthening security and other areasmore » and how increased coordination can improve safety and reduce long-term cost.« less

Single pilot IFR accident data analysis

NASA Technical Reports Server (NTRS)

Harris, D. F.; Morrisete, J. A.

1982-01-01

The aircraft accident data recorded and maintained by the National Transportation Safety Board for 1964 to 1979 were analyzed to determine what problems exist in the general aviation single pilot instrument flight rules environment. A previous study conducted in 1978 for the years 1964 to 1975 provided a basis for comparison. The purpose was to determine what changes, if any, have occurred in trends and cause-effect relationships reported in the earlier study. The increasing numbers have been tied to measures of activity to produce accident rates which in turn were analyzed in terms of change. Where anomalies or unusually high accident rates were encountered, further analysis was conducted to isolate pertinent patterns of cause factors and/or experience levels of involved pilots. The bulk of the effort addresses accidents in the landing phase of operations. A detailed analysis was performed on controlled/uncontrolled collisions and their unique attributes delineated. Estimates of day vs. night general aviation activity and accident rates were obtained.

Public Safety Standards for the Launch and Entry of Spacecraft

NASA Astrophysics Data System (ADS)

Wilde, Paul; Van Suetendael, Richard; Hallock, James; Larson, Erik

2005-12-01

This paper describes elements of the US government's response to the Space Shuttle Columbia accident and other actions recently taken, relevant to public safety during launch and entry of spacecraft. The Columbia accident generated numerous debris impacts capable of causing public harm, including major property damage as well as serious injury to members of the public on the ground, in aircraft, and on waterborne vessels. The Columbia Accident Investigation Board (CAIB) commissioned an analysis by ACTA Inc. that found the lack of reported casualties on the ground was a reasonably expected result based on the recovered debris data, census data, and mathematical methods consistent with current standards for launch debris risk analyses. [1, 2] A more detailed aircraft risk analysis, funded by the Federal Aviation Administration (FAA), used the actual records of aircraft activity at the time of the accident, and found that the probability of an impact by Columbia debris to commercial aircraft in the vicinity was at least one in a thousand, and the chance of an impact to general aviation was at least one in a hundred. [3] After FAA executives were briefed about the potential for aircraft impacts during the Columbia accident, and the challenges presented by integration of innovative vehicles such as SpaceShipOne into the National Airspace System (NAS), the FAA began to investigate a decision support tool to better manage the interface of space and air traffic in the future. In addition, the FAA asked the Common Standards Working Group (CSWG) to investigate risk and air traffic management issues that arise in the event of space vehicle accidents and to develop safety standards to govern the interface between space and air traffic. Most recently, the FAA funded a study of aircraft risk around operating areas for future flights of suborbital rockets that may be authorized by an Experimental Permit (EP). Congress mandated that the FAA develop the EP regime as a streamlined regulatory mechanism relative to a launch license to facilitate research and development tests of reusable suborbital rockets. In response to this Congressional mandate, the FAA has taken a clean sheet look at public risks from launch, including risks to people on the ground, in aircraft, or waterborne vessels of any kind. As a result, several qualitative guiding principles for public safety were formulated that can be used to establish specific quantitative requirements to demonstrate adequate public protection. This paper discusses such efforts made by the US government in response to the Columbia accident, and proposes possible performance standards and safety requirements for public safety based on recent work sponsored by the FAA. For example, this paper presents an analysis of data on aircraft accidents, including serious injuries and fatalities on-board and on the ground, and proposes quantitative safety requirements that would demonstrate compliance with the following performance standard: for any individual not involved in the mission, but participating in a voluntary activity that increases their background risk (such as traveling in an aircraft or waterborne vessel), the chances of casualty resulting from the mission should be no greater than the background risk associated with the voluntary activity.

Offsite radiological consequence analysis for the bounding flammable gas accident

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARRO, C.A.

2003-03-19

The purpose of this analysis is to calculate the offsite radiological consequence of the bounding flammable gas accident. DOE-STD-3009-94, ''Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', requires the formal quantification of a limited subset of accidents representing a complete set of bounding conditions. The results of these analyses are then evaluated to determine if they challenge the DOE-STD-3009-94, Appendix A, ''Evaluation Guideline,'' of 25 rem total effective dose equivalent in order to identify and evaluate safety class structures, systems, and components. The bounding flammable gas accident is a detonation in a single-shell tank (SST).more » A detonation versus a deflagration was selected for analysis because the faster flame speed of a detonation can potentially result in a larger release of respirable material. As will be shown, the consequences of a detonation in either an SST or a double-shell tank (DST) are approximately equal. A detonation in an SST was selected as the bounding condition because the estimated respirable release masses are the same and because the doses per unit quantity of waste inhaled are generally greater for SSTs than for DSTs. Appendix A contains a DST analysis for comparison purposes.« less

Coal Canyon Fire: Serious Accident Investigation Report

Treesearch

Charles L. Myers; Randy Draeger; Antoine Dixon; Cliff Dahl; Jim Saveland; Brad Mayhew; Gary Brown; Tony Petrilli; Ben Murphy; Erin Newman; Karen Mora; Tim Foley

2012-01-01

The purpose of this report is to present the facts proximal to the accident and share the Team's analysis in a way that enhances the reliability and resilience of Federal, State, and Local wildland fire organizations. The intent is to spur discussion and learning for those in the fire and safety community at all levels.

APT Blanket System Loss-of-Coolant Accident (LOCA) Based on Initial Conceptual Design - Case 4: External Pressurizer Surge Line Break Near Inlet Header

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamm, L.L.

1998-10-07

This report is one of a series of reports documenting accident scenario simulations for the Accelerator Production of Tritium (APT) blanket heat removal systems. The simulations were performed in support of the Preliminary Safety Analysis Report (PSAR) for the APT.

Young people and snowmobiling in northern Norway: accidents, injury prevention and safety strategies.

PubMed

Mehus, Grete; Mehus, Alf Gunnar; Germeten, Sidsel; Henriksen, Nils

2016-01-01

Snowmobiling among young people in Scandinavia frequently leads to accidents and injuries. Systematic studies of accidents exist, but few studies have addressed young drivers' experiences. The aim of this article is to reveal how young people experience and interpret accidents, and to outline a prevention strategy. Thirty-one girls and 50 boys aged 16-23 years from secondary schools in Northern Norway and on Svalbard, a Norwegian archipelago in the Arctic Ocean, participated in 17 focus groups segregated by gender. A content analysis identified themes addressing the research questions. Participants described risk as being inherent to snowmobiling, and claimed that accidents followed from poor risk assessment, careless driving or mishaps. Evaluation of accidents and recommendations for preventive measures varied. Girls acknowledged the risks and wanted knowledge about outdoor life, navigation and external risks. Boys underestimated or downplayed the risks, and wanted knowledge about safety precautions while freeriding. Both genders were aware of how and why accidents occurred, and took precautions. Boys tended to challenge norms in ways that contradict the promotion of safe driving behaviour. Stories of internal justice regarding driving under the influence of alcohol occurred. Adolescents are aware of how accidents occur and how to avoid them. Injury prevention strategies should include a general population strategy and a high-risk strategy targeted at extreme risk-seekers. Drivers, snowmobilers' organisations and the community should share local knowledge in an effort to define problem areas, set priorities and develop and implement preventive measures. Risk prevention should include preparation of safe tracks and focus on safety equipment and safe driving behaviour, but should also pay increased attention to the potential of strengthening normative regulation within peer groups regarding driving behaviour and mutual responsibility for preventing accidents.

Explaining the road accident risk: weather effects.

PubMed

Bergel-Hayat, Ruth; Debbarh, Mohammed; Antoniou, Constantinos; Yannis, George

2013-11-01

This research aims to highlight the link between weather conditions and road accident risk at an aggregate level and on a monthly basis, in order to improve road safety monitoring at a national level. It is based on some case studies carried out in Work Package 7 on "Data analysis and synthesis" of the EU-FP6 project "SafetyNet-Building the European Road Safety Observatory", which illustrate the use of weather variables for analysing changes in the number of road injury accidents. Time series analysis models with explanatory variables that measure the weather quantitatively were used and applied to aggregate datasets of injury accidents for France, the Netherlands and the Athens region, over periods of more than 20 years. The main results reveal significant correlations on a monthly basis between weather variables and the aggregate number of injury accidents, but the magnitude and even the sign of these correlations vary according to the type of road (motorways, rural roads or urban roads). Moreover, in the case of the interurban network in France, it appears that the rainfall effect is mainly direct on motorways--exposure being unchanged, and partly indirect on main roads--as a result of changes in exposure. Additional results obtained on a daily basis for the Athens region indicate that capturing the within-the-month variability of the weather variables and including it in a monthly model highlights the effects of extreme weather. Such findings are consistent with previous results obtained for France using a similar approach, with the exception of the negative correlation between precipitation and the number of injury accidents found for the Athens region, which is further investigated. The outlook for the approach and its added value are discussed in the conclusion. Copyright © 2013. Published by Elsevier Ltd.

Experimental field test of proposed pedestrian safety messages. Volume 2, Child messages

DOT National Transportation Integrated Search

1983-11-01

Author's abstract: A detailed re-analysis of available pedestrian accident data was utilized to define three sets of pedestrian safety public information and education (PI&E) messages. These messages were then produced and field tested. The objective...

Interim MELCOR Simulation of the Fukushima Daiichi Unit 2 Accident Reactor Core Isolation Cooling Operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ross, Kyle W.; Gauntt, Randall O.; Cardoni, Jeffrey N.

2013-11-01

Data, a brief description of key boundary conditions, and results of Sandia National Laboratories’ ongoing MELCOR analysis of the Fukushima Unit 2 accident are given for the reactor core isolation cooling (RCIC) system. Important assumptions and related boundary conditions in the current analysis additional to or different than what was assumed/imposed in the work of SAND2012-6173 are identified. This work is for the U.S. Department of Energy’s Nuclear Energy University Programs fiscal year 2014 Reactor Safety Technologies Research and Development Program RC-7: RCIC Performance under Severe Accident Conditions.

Railroad safety program, task 2

NASA Technical Reports Server (NTRS)

1983-01-01

Aspects of railroad safety and the preparation of a National Inspection Plan (NIP) for rail safety improvement are examined. Methodology for the allocation of inspection resources, preparation of a NIP instruction manual, and recommendations for future NIP, are described. A statistical analysis of regional rail accidents is presented with causes and suggested preventive measures included.

An Analysis of Water Safety Behaviors among Migrant and Economically/Educationally Disadvantaged Middle School Students

ERIC Educational Resources Information Center

Sbarbaro, Victor S.; Enyeart Smith, Theresa M.

2011-01-01

This water safety study was both descriptive and exploratory in nature. The purpose was for middle school students to assess their own water safety experiences and to help school decision-makers determine the extent of drowning/water accidents. In July 2009, a water safety survey was administered to 122 students participating in the local Summer…

Road Traffic Accident Analysis of Ajmer City Using Remote Sensing and GIS Technology

NASA Astrophysics Data System (ADS)

Bhalla, P.; Tripathi, S.; Palria, S.

2014-12-01

With advancement in technology, new and sophisticated models of vehicle are available and their numbers are increasing day by day. A traffic accident has multi-facet characteristics associated with it. In India 93% of crashes occur due to Human induced factor (wholly or partly). For proper traffic accident analysis use of GIS technology has become an inevitable tool. The traditional accident database is a summary spreadsheet format using codes and mileposts to denote location, type and severity of accidents. Geo-referenced accident database is location-referenced. It incorporates a GIS graphical interface with the accident information to allow for query searches on various accident attributes. Ajmer city, headquarter of Ajmer district, Rajasthan has been selected as the study area. According to Police records, 1531 accidents occur during 2009-2013. Maximum accident occurs in 2009 and the maximum death in 2013. Cars, jeeps, auto, pickup and tempo are mostly responsible for accidents and that the occurrence of accidents is mostly concentrated between 4PM to 10PM. GIS has proved to be a good tool for analyzing multifaceted nature of accidents. While road safety is a critical issue, yet it is handled in an adhoc manner. This Study is a demonstration of application of GIS for developing an efficient database on road accidents taking Ajmer City as a study. If such type of database is developed for other cities, a proper analysis of accidents can be undertaken and suitable management strategies for traffic regulation can be successfully proposed.

Identification of Crew-Systems Interactions and Decision Related Trends

NASA Technical Reports Server (NTRS)

Jones, Sharon Monica; Evans, Joni K.; Reveley, Mary S.; Withrow, Colleen A.; Ancel, Ersin; Barr, Lawrence

2013-01-01

NASA Vehicle System Safety Technology (VSST) project management uses systems analysis to identify key issues and maintain a portfolio of research leading to potential solutions to its three identified technical challenges. Statistical data and published safety priority lists from academic, industry and other government agencies were reviewed and analyzed by NASA Aviation Safety Program (AvSP) systems analysis personnel to identify issues and future research needs related to one of VSST's technical challenges, Crew Decision Making (CDM). The data examined in the study were obtained from the National Transportation Safety Board (NTSB) Aviation Accident and Incident Data System, Federal Aviation Administration (FAA) Accident/Incident Data System and the NASA Aviation Safety Reporting System (ASRS). In addition, this report contains the results of a review of safety priority lists, information databases and other documented references pertaining to aviation crew systems issues and future research needs. The specific sources examined were: Commercial Aviation Safety Team (CAST) Safety Enhancements Reserved for Future Implementation (SERFIs), Flight Deck Automation Issues (FDAI) and NTSB Most Wanted List and Open Recommendations. Various automation issues taxonomies and priority lists pertaining to human factors, automation and flight design were combined to create a list of automation issues related to CDM.

MELCOR Analysis of OSU Multi-Application Small Light Water Reactor (MASLWR) Experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoon, Dhongik S.; Jo, HangJin; Fu, Wen

A multi-application small light water reactor (MASLWR) conceptual design was developed by Oregon State University (OSU) with emphasis on passive safety systems. The passive containment safety system employs condensation and natural circulation to achieve the necessary heat removal from the containment in case of postulated accidents. Containment condensation experiments at the MASLWR test facility at OSU are modeled and analyzed with MELCOR, a system-level reactor accident analysis computer code. The analysis assesses its ability to predict condensation heat transfer in the presence of noncondensable gas for accidents where high-energy steam is released into the containment. This work demonstrates MELCOR’s abilitymore » to predict the pressure-temperature response of the scaled containment. Our analysis indicates that the heat removal rates are underestimated in the experiment due to the limited locations of the thermocouples and applies corrections to these measurements by conducting integral energy analyses along with CFD simulation for confirmation. Furthermore, the corrected heat removal rate measurements and the MELCOR predictions on the heat removal rate from the containment show good agreement with the experimental data.« less

MELCOR Analysis of OSU Multi-Application Small Light Water Reactor (MASLWR) Experiment

DOE PAGES

Yoon, Dhongik S.; Jo, HangJin; Fu, Wen; ...

2017-05-23

A multi-application small light water reactor (MASLWR) conceptual design was developed by Oregon State University (OSU) with emphasis on passive safety systems. The passive containment safety system employs condensation and natural circulation to achieve the necessary heat removal from the containment in case of postulated accidents. Containment condensation experiments at the MASLWR test facility at OSU are modeled and analyzed with MELCOR, a system-level reactor accident analysis computer code. The analysis assesses its ability to predict condensation heat transfer in the presence of noncondensable gas for accidents where high-energy steam is released into the containment. This work demonstrates MELCOR’s abilitymore » to predict the pressure-temperature response of the scaled containment. Our analysis indicates that the heat removal rates are underestimated in the experiment due to the limited locations of the thermocouples and applies corrections to these measurements by conducting integral energy analyses along with CFD simulation for confirmation. Furthermore, the corrected heat removal rate measurements and the MELCOR predictions on the heat removal rate from the containment show good agreement with the experimental data.« less

50 CFR 401.17 - Safety and accident prevention.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Safety and accident prevention. 401.17 Section 401.17 Wildlife and Fisheries JOINT REGULATIONS (UNITED STATES FISH AND WILDLIFE SERVICE... FISHERIES CONSERVATION, DEVELOPMENT AND ENHANCEMENT § 401.17 Safety and accident prevention. In the...

Content analysis of 100 consecutive media reports of amusement ride accidents.

PubMed

Woodcock, Kathryn

2008-01-01

Accident investigations influence public perceptions and safety management strategies by determining the amount and type of information learned about the accident. To examine the factors considered in investigations, this study used a content analysis of 100 consecutive media reports of amusement ride accidents from an online media archive. Fatalities were overrepresented in the media dataset compared with U.S. national estimates. For analysis of reports, a modified "Haddon matrix" was developed using human-factors categories. This approach was useful to show differences between the proportions and types of factors considered in the different accident stages and between employee and rider accidents. Employee injury accounts primarily referred to the employee's task and to the employee. Rider injury reports were primarily related to the ride device itself and rarely referred to the rider's "task", social influences, or the rider's own actions, and only some reference to their characteristics. Qualitatively, it was evident that more human factors analysis is required to augment scant pre-failure information about the task, social environment, and the person, to make that information available for prevention of amusement ride accidents. By design, this study reflected information reported by the media. Future work will use the same techniques with official reports.

Characteristics of worker accidents on NYSDOT construction projects.

PubMed

Mohan, Satish; Zech, Wesley C

2005-01-01

This paper aims at providing cost-effective safety measures to protect construction workers in highway work zones, based on real data. Two types of accidents that occur in work zones were: (a) construction work area accidents, and (b) traffic accidents involving construction worker(s). A detailed analysis of work zone accidents involving 36 fatalities and 3,055 severe injuries to construction workers on New York State Department of Transportation (NYSDOT) construction projects from 1990 to 2001 established that five accident types: (a) Struck/Pinned by Large Equipment, (b) Trip or Fall (elevated), (c) Contact w/Electrical or Gas Utility, (d) Struck-by Moving/Falling Load, and (e) Crane/Lift Device Failure accounted for nearly 96% of the fatal accidents, nearly 63% of the hospital-level injury accidents, and nearly 91% of the total costs. These construction work area accidents had a total cost of $133.8 million. Traffic accidents that involve contractors' employees were also examined. Statistical analyses of the traffic accidents established that five traffic accident types: (a) Work Space Intrusion, (b) Worker Struck-by Vehicle Inside Work Space, (c) Flagger Struck-by Vehicle, (d) Worker Struck-by Vehicle Entering/Exiting Work Space, and (e) Construction Equipment Struck-by Vehicle Inside Work Space accounted for nearly 86% of the fatal, nearly 70% of the hospital-level injury and minor injury traffic accidents, and $45.4 million (79.4%) of the total traffic accident costs. The results of this paper provide real statistics on construction worker related accidents reported on construction work zones. Potential preventions based on real statistics have also been suggested. The ranking of accident types, both within the work area as well as in traffic, will guide the heavy highway contractor and owner agencies in identifying the most cost effective safety preventions.

Control of Industrial Safety Based on Dynamic Characteristics of a Safety Budget-Industrial Accident Rate Model in Republic of Korea.

PubMed

Choi, Gi Heung; Loh, Byoung Gook

2017-06-01

Despite the recent efforts to prevent industrial accidents in the Republic of Korea, the industrial accident rate has not improved much. Industrial safety policies and safety management are also known to be inefficient. This study focused on dynamic characteristics of industrial safety systems and their effects on safety performance in the Republic of Korea. Such dynamic characteristics are particularly important for restructuring of the industrial safety system. The effects of damping and elastic characteristics of the industrial safety system model on safety performance were examined and feedback control performance was explained in view of cost and benefit. The implications on safety policies of restructuring the industrial safety system were also explored. A strong correlation between the safety budget and the industrial accident rate enabled modeling of an industrial safety system with these variables as the input and the output, respectively. A more effective and efficient industrial safety system could be realized by having weaker elastic characteristics and stronger damping characteristics in it. A substantial decrease in total social cost is expected as the industrial safety system is restructured accordingly. A simple feedback control with proportional-integral action is effective in prevention of industrial accidents. Securing a lower level of elastic industrial accident-driving energy appears to have dominant effects on the control performance compared with the damping effort to dissipate such energy. More attention needs to be directed towards physical and social feedbacks that have prolonged cumulative effects. Suggestions for further improvement of the safety system including physical and social feedbacks are also made.

ADAM: An Accident Diagnostic,Analysis and Management System - Applications to Severe Accident Simulation and Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zavisca, M.J.; Khatib-Rahbar, M.; Esmaili, H.

2002-07-01

The Accident Diagnostic, Analysis and Management (ADAM) computer code has been developed as a tool for on-line applications to accident diagnostics, simulation, management and training. ADAM's severe accident simulation capabilities incorporate a balance of mechanistic, phenomenologically based models with simple parametric approaches for elements including (but not limited to) thermal hydraulics; heat transfer; fuel heatup, meltdown, and relocation; fission product release and transport; combustible gas generation and combustion; and core-concrete interaction. The overall model is defined by a relatively coarse spatial nodalization of the reactor coolant and containment systems and is advanced explicitly in time. The result is to enablemore » much faster than real time (i.e., 100 to 1000 times faster than real time on a personal computer) applications to on-line investigations and/or accident management training. Other features of the simulation module include provision for activation of water injection, including the Engineered Safety Features, as well as other mechanisms for the assessment of accident management and recovery strategies and the evaluation of PSA success criteria. The accident diagnostics module of ADAM uses on-line access to selected plant parameters (as measured by plant sensors) to compute the thermodynamic state of the plant, and to predict various margins to safety (e.g., times to pressure vessel saturation and steam generator dryout). Rule-based logic is employed to classify the measured data as belonging to one of a number of likely scenarios based on symptoms, and a number of 'alarms' are generated to signal the state of the reactor and containment. This paper will address the features and limitations of ADAM with particular focus on accident simulation and management. (authors)« less

Processes of technology assessment: The National Transportation Safety Board

NASA Technical Reports Server (NTRS)

Weiss, E.

1972-01-01

The functions and operations of the Safety Board as related to technology assessment are described, and a brief history of the Safety Board is given. Recommendations made for safety in all areas of transportation and the actions taken are listed. Although accident investigation is an important aspect of NTSB's activity, it is felt that the greatest contribution is in pressing for development of better accident prevention programs. Efforts of the Safety Board in changing transportation technology to improve safety and prevent accidents are illustrated.

14 CFR 91.1021 - Internal safety reporting and incident/accident response.

Code of Federal Regulations, 2011 CFR

2011-01-01

.../accident response. 91.1021 Section 91.1021 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... incident/accident response. (a) Each program manager must establish an internal anonymous safety reporting.... (b) Each program manager must establish procedures to respond to an aviation incident/accident. ...

Experimental field test of proposed pedestrian safety messages. Volume 1, Methods and materials development

DOT National Transportation Integrated Search

1983-11-01

Author's abstract: A detailed re-analysis of available pedestrian accident data was utilized to define three sets of pedestrian safety public information and education (PI&E) messages. These messages were then produced and field tested. The objective...

Willingness to use safety belt and levels of injury in car accidents.

PubMed

de Lapparent, Matthieu

2008-05-01

In this article, we develop a bivariate ordered Probit model to analyze the decision to fasten the safety belt in a car and the resulting severity of accidents if it happens. The approach takes into account the fact that the decision to fasten the safety belt has a direct causal effect on the category of injury if an accident happens. Our application to a sample drawn from the database of French accident reports in 2003 for three populations of car users (drivers, front passengers, rear passengers) shows that fastening the safety belt is significantly related to a decrease in severe injuries but it shows also that these car users compensate partly for this safety benefit. Furthermore, it is observed that demographic characteristics of car users, as well as transport facilities, play important roles in decisions to fasten safety belts and in the eventual resulting accident injuries.

Farm accidents in children.

PubMed Central

Cameron, D.; Bishop, C.; Sibert, J. R.

1992-01-01

OBJECTIVE--To examine the problem of accidental injury to children on farms. DESIGN--Prospective county based study of children presenting to accident and emergency departments over 12 months with injuries sustained in a farm setting and nationwide review of fatal childhood farm accidents over the four years April 1986 to March 1990. SETTING--Accident and emergency departments in Aberystwyth, Carmarthen, Haverfordwest, and Llanelli and fatal accidents in England, Scotland, and Wales notified to the Health and Safety Executive register. SUBJECTS--Children aged under 16. MAIN OUTCOME MEASURE--Death or injury after farm related accidents. RESULTS--65 accidents were recorded, including 18 fractures. Nine accidents necessitated admission to hospital for a mean of two (range one to four) days. 13 incidents were related to tractors and other machinery; 24 were due to falls. None of these incidents were reported under the statutory notification scheme. 33 deaths were notified, eight related to tractors and allied machinery and 10 related to falling objects. CONCLUSIONS--Although safety is improving, the farm remains a dangerous environment for children. Enforcement of existing safety legislation with significant penalties and targeting of safety education will help reduce accident rates further. PMID:1638192

Safety evaluation model of urban cross-river tunnel based on driving simulation.

PubMed

Ma, Yingqi; Lu, Linjun; Lu, Jian John

2017-09-01

Currently, Shanghai urban cross-river tunnels have three principal characteristics: increased traffic, a high accident rate and rapidly developing construction. Because of their complex geographic and hydrological characteristics, the alignment conditions in urban cross-river tunnels are more complicated than in highway tunnels, so a safety evaluation of urban cross-river tunnels is necessary to suggest follow-up construction and changes in operational management. A driving risk index (DRI) for urban cross-river tunnels was proposed in this study. An index system was also constructed, combining eight factors derived from the output of a driving simulator regarding three aspects of risk due to following, lateral accidents and driver workload. Analytic hierarchy process methods and expert marking and normalization processing were applied to construct a mathematical model for the DRI. The driving simulator was used to simulate 12 Shanghai urban cross-river tunnels and a relationship was obtained between the DRI for the tunnels and the corresponding accident rate (AR) via a regression analysis. The regression analysis results showed that the relationship between the DRI and the AR mapped to an exponential function with a high degree of fit. In the absence of detailed accident data, a safety evaluation model based on factors derived from a driving simulation can effectively assess the driving risk in urban cross-river tunnels constructed or in design.

A Flexible Hierarchical Bayesian Modeling Technique for Risk Analysis of Major Accidents.

PubMed

Yu, Hongyang; Khan, Faisal; Veitch, Brian

2017-09-01

Safety analysis of rare events with potentially catastrophic consequences is challenged by data scarcity and uncertainty. Traditional causation-based approaches, such as fault tree and event tree (used to model rare event), suffer from a number of weaknesses. These include the static structure of the event causation, lack of event occurrence data, and need for reliable prior information. In this study, a new hierarchical Bayesian modeling based technique is proposed to overcome these drawbacks. The proposed technique can be used as a flexible technique for risk analysis of major accidents. It enables both forward and backward analysis in quantitative reasoning and the treatment of interdependence among the model parameters. Source-to-source variability in data sources is also taken into account through a robust probabilistic safety analysis. The applicability of the proposed technique has been demonstrated through a case study in marine and offshore industry. © 2017 Society for Risk Analysis.

Risk Analysis for Public Consumption: Media Coverage of the Ginna Nuclear Reactor Accident.

ERIC Educational Resources Information Center

Dunwoody, Sharon; And Others

Researchers have determined that the lay public makes risk judgments in ways that are very different from those advocated by scientists. Noting that these differences have caused considerable concern among those who promote and regulate health and safety, a study examined media coverage of the accident at the Robert E. Ginna nuclear power plant…

SOARCA Peach Bottom Atomic Power Station Long-Term Station Blackout Uncertainty Analysis: Knowledge Advancement.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauntt, Randall O.; Mattie, Patrick D.; Bixler, Nathan E.

2014-02-01

This paper describes the knowledge advancements from the uncertainty analysis for the State-of- the-Art Reactor Consequence Analyses (SOARCA) unmitigated long-term station blackout accident scenario at the Peach Bottom Atomic Power Station. This work assessed key MELCOR and MELCOR Accident Consequence Code System, Version 2 (MACCS2) modeling uncertainties in an integrated fashion to quantify the relative importance of each uncertain input on potential accident progression, radiological releases, and off-site consequences. This quantitative uncertainty analysis provides measures of the effects on consequences, of each of the selected uncertain parameters both individually and in interaction with other parameters. The results measure the modelmore » response (e.g., variance in the output) to uncertainty in the selected input. Investigation into the important uncertain parameters in turn yields insights into important phenomena for accident progression and off-site consequences. This uncertainty analysis confirmed the known importance of some parameters, such as failure rate of the Safety Relief Valve in accident progression modeling and the dry deposition velocity in off-site consequence modeling. The analysis also revealed some new insights, such as dependent effect of cesium chemical form for different accident progressions. (auth)« less

Predicting and analyzing the trend of traffic accidents deaths in Iran in 2014 and 2015

PubMed Central

Mehmandar, Mohammadreza; Soori, Hamid; Mehrabi, Yadolah

2016-01-01

Background: Predicting the trend in traffic accidents deaths and its analysis can be a useful tool for planning and policy-making, conducting interventions appropriate with death trend, and taking the necessary actions required for controlling and preventing future occurrences. Objective: Predicting and analyzing the trend of traffic accidents deaths in Iran in 2014 and 2015. Settings and Design: It was a cross-sectional study. Materials and Methods: All the information related to fatal traffic accidents available in the database of Iran Legal Medicine Organization from 2004 to the end of 2013 were used to determine the change points (multi-variable time series analysis). Using autoregressive integrated moving average (ARIMA) model, traffic accidents death rates were predicted for 2014 and 2015, and a comparison was made between this rate and the predicted value in order to determine the efficiency of the model. Results: From the results, the actual death rate in 2014 was almost similar to that recorded for this year, while in 2015 there was a decrease compared with the previous year (2014) for all the months. A maximum value of 41% was also predicted for the months of January and February, 2015. Conclusion: From the prediction and analysis of the death trends, proper application and continuous use of the intervention conducted in the previous years for road safety improvement, motor vehicle safety improvement, particularly training and culture-fostering interventions, as well as approval and execution of deterrent regulations for changing the organizational behaviors, can significantly decrease the loss caused by traffic accidents. PMID:27308255

Safety in Academic Chemistry Laboratories: Volume 1. Accident Prevention for College and University Students, 7th Edition.

ERIC Educational Resources Information Center

American Chemical Society, Washington, DC.

This book contains volume 1 of 2 and describes safety guidelines for academic chemistry laboratories to prevent accidents for college and university students. Contents include: (1) "Your Responsibility for Accident Prevention"; (2) "Guide to Chemical Hazards"; (3) "Recommended Laboratory Techniques"; and (4) "Safety Equipment and Emergency…

Safety in Academic Chemistry Laboratories: Volume 2. Accident Prevention for Faculty and Administrators, 7th Edition.

ERIC Educational Resources Information Center

American Chemical Society, Washington, DC.

This book contains volume 2 of 2 and describes safety guidelines for academic chemistry laboratories to prevent accidents for college and university students. Contents include: (1) "Organizing for Accident Prevention"; (2) "Personal Protective Equipment"; (3) "Labeling"; (4) "Material Safety Data Sheets (MSDSs)"; (5) "Preparing for Medical…

Final safety analysis report for the Galileo Mission: Volume 1, Reference design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Galileo mission uses nuclear power sources called Radioisotope Thermoelectric Generators (RTGs) to provide the spacecraft's primary electrical power. Because these generators contain nuclear material, a Safety Analysis Report (SAR) is required. A preliminary SAR and an updated SAR were previously issued that provided an evolving status report on the safety analysis. As a result of the Challenger accident, the launch dates for both Galileo and Ulysses missions were later rescheduled for November 1989 and October 1990, respectively. The decision was made by agreement between the DOE and the NASA to have a revised safety evaluation and report (FSAR) preparedmore » on the basis of these revised vehicle accidents and environments. The results of this latest revised safety evaluation are presented in this document (Galileo FSAR). Volume I, this document, provides the background design information required to understand the analyses presented in Volumes II and III. It contains descriptions of the RTGs, the Galileo spacecraft, the Space Shuttle, the Inertial Upper Stage (IUS), the trajectory and flight characteristics including flight contingency modes, and the launch site. There are two appendices in Volume I which provide detailed material properties for the RTG.« less

Study on occupational safety and health strategy for Taiwan.

PubMed

Chuang, Kuen-Yuan; Su, Teh-Sheng; Kuo, Chao-Yin; Lin, Chien-Liang; Lin, Han-Yu; Yu, Yi-Chun

2009-12-01

The aim of this study was to establish a set of occupational safety and health (OSH) issues and development policies suitable for adoption in Taiwan. A survey was conducted on a sample of 102 experts and 235 industrial work safety personnel in Taiwan for statistical analysis of the general consensus, with the results showing such consensus in 104 individual policy indicators. Our results reveal that the most appropriate targets were considered to be annual 10% reductions in the 'occupational accident disability rate', 'occupational accident injury rate' and 'occupational diseases before 2010'. Responding to the specific question of the appropriate method of achieving a reduction in the number of accidents in Taiwan, the primary consideration for 13.4% of the experts and 10.6% of the industry personnel was 'promoting OSH awareness and enhancing the overall safety culture'. As regards the current OSH policy focus, 11.2% of the experts considered 'improving OSH legislation, standards and systems' to be the most important, whilst 8.9% of the industry personnel felt that 'recognizing work stress, overwork and emerging OSH issues' were the most important.

The Accident at TEPCO's Fukushima-Daiichi Nuclear Power Plant: Technical Description of What Happened and Lessons Learned for the Future

NASA Astrophysics Data System (ADS)

Omoto, Akira

2012-02-01

Tsunami that followed M9.0 earthquake on March 11^th left the Fukushima-Daiichi Nuclear Power Plants without power and heat sink. While water makeup continued by AC-independent systems to keep the fuel core covered by coolant, operating team tried to depressurize and enable low pressure injection to the reactor to avoid overheating but was not successful enough primarily due to limited available resources. This resulted in core melt, hydrogen explosion and release of radioactivity to the environment. Key lessons learned are; 1) safety regulation and safety culture, 2) workable/executable severe accident management procedure, 3) crisis management and 4) design. Implications on security include revealed vulnerability and the nexus of safety and security. Given the scale of damage to the environmental, attention must be paid to defense against it and to societal safety goal of nuclear power by considering offsite remedial costs, compensation to damage, energy replacement cost etc. A sort of root cause analysis first by asking ``Why nuclear community failed to prevent this accident?'' was initiated by the University of Tokyo.

Analysis of traffic accidents in Romania, 2009.

PubMed

Călinoiu, Geovana; Minca, Dana Galieta; Furtunescu, Florentina Ligia

2012-01-01

This paper aimed to underline the main consequences of traffic accidents in Romania 2009 and their associated causes or circumstances. We identified some problematic geographic areas, some critical months or moments of the day and also the most frequent causes; all these should become targets for the future planning. The current analysis provides some priority criteria for public health interventions. So, the future national road safety strategy should be in line with the EU objectives, but also with the national priorities. Romania is far away from the average EU target for 2010 of halving the death by traffic accidents registered in 2001. To describe the circumstances and the consequences related to traffic accidents registered in Romania, for the year 2009. An ecological study was conducted. The traffic accidents circumstances were analyzed in terms of magnitude, geographic space, time and cause. The consequences were analyzed as affected people and damaged cars. A total of 28,627 traffic accidents were registered in Romania during the year 2009. 2,796 people were killed and 27,968 were hospitalized and 42,443 cars were damaged. 3 of 4 accidents were caused by violations on behalf of the car drivers. Most common violations in car drivers were excess of speed and priority violations (52.4%). Among the pedestrians, 7 of 10 accidents were caused by illegal crossing. A higher number of accidents occurred during the summer months and during the evening hours (from 5.00 pm till 8.00 pm). The traffic accidents represent a real public health problem in Romania and a serious burden for the health system. The gap between Romania and the other EU member states needs to be diminished in the next decade. In this purpose, the future national road safety strategy should be in line with the EU objectives, but also with the national priorities. Research is needed to understand the causes and the socio-economical impact of traffic accidents and to define appropriate national objectives.

Estimation of fatality and injury risk by means of in-depth fatal accident investigation data.

PubMed

Yannis, George; Papadimitriou, Eleonora; Dupont, Emmanuelle; Martensen, Heike

2010-10-01

In this article the factors affecting fatality and injury risk of road users involved in fatal accidents are analyzed by means of in-depth accident investigation data, with emphasis on parameters not extensively explored in previous research. A fatal accident investigation (FAI) database is used, which includes intermediate-level in-depth data for a harmonized representative sample of 1300 fatal accidents in 7 European countries. The FAI database offers improved potential for analysis, because it includes information on a number of variables that are seldom available, complete, or accurately recorded in road accident databases. However, the fact that only fatal accidents are examined requires for methodological adjustments, namely, the correction for two types of effects on a road user's baseline risk: "accident size" effects, and "relative vulnerability" effects. Fatality and injury risk can be then modeled through multilevel logistic regression models, which account for the hierarchical dependences of the road accident process. The results show that the baseline fatality risk of road users involved in fatal accidents decreases with accident size and increases with the vulnerability of the road user. On the contrary, accident size increases nonfatal injury risk of road users involved in fatal accidents. Other significant effects on fatality and injury risk in fatal accidents include road user age, vehicle type, speed limit, the chain of accident events, vehicle maneuver, and safety equipment. In particular, the presence and use of safety equipment such as seat belt, antilock braking system (ABS), and electronic stability program (ESP) are protection factors for car occupants, especially for those seated at the front seats. Although ABS and ESP systems are typically associated with positive effects on accident occurrence, the results of this research revealed significant related effects on accident severity as well. Moreover, accident consequences are more severe when the most harmful event of the accident occurs later within the accident chain.

The influence of age, seat belt, time of day, and type of vehicles on road accidents in Kerman, Iran.

PubMed

Mohammadi, Ghorbanali

2009-04-01

Traffic accidents are one of the main external causes of morbidity and mortality in various parts of the world, including Kerman, a city that has experienced rapid growth in the number of cars in the last 5 years. The objective of this article was to identify the influence of age, belt use, time of day, and type of vehicle road accidents of southeastern Iran. This study used data obtained from Kerman police force reports on incidents of road traffic accidents (RTAs). We analyzed the police reports of total road accidents that occurred from 2005 to 2007. The involvement in fatal and non-fatal accidents was determined for females than among males. The analysis of the data indicated that the female drivers have a much better road safety record than male drivers, especially with regards to their involvement in severe traffic accidents. Forty-nine percent of accidents involve passenger cars, which is higher than other type of vehicles. Female drivers were found to be generally safer drivers than their male counterparts; male drivers who did not use seat belts had a higher involvement rate in road traffic accidents. Time of day analyses suggested that the problems of accidents in darkness are not a matter of visibility but a consequence of the way drivers use the roads at night. A number of recommended measures for the improvement of road safety in southeastern Iran are suggested.

Survivors Perceptions of Recovery following Air Medical Transport Accidents.

PubMed

Jaynes, Cathy L; Valdez, Anna; Hamilton, Megan; Haugen, Krista; Henry, Colin; Jones, Pat; Werman, Howard A; White, Lynn J

2015-01-01

Abstract Objective: Air medical transport (AMT) teams play an essential role in the care of the critically ill and injured. Their work, however, is not without risk. Since the inception of the industry numerous AMT accidents have been reported. The objective of this research is to gain a better understanding of the post-accident sequelae for professionals who have survived AMT accidents. The hope is that this understanding will empower the industry to better support survivors and plan for the contingencies of post-accident recovery. Methods: Qualitative methods were used to explore the experience of flight crew members who have survived an AMT accident. "Accident" was defined using criteria established by the National Transportation Safety Board. Traditional focus group methodology explored the survivors' experiences following the accident. Results: Seven survivors participated in the focus group. Content analysis revealed themes in four major domains that described the experience of survivors: Physical, Psychological, Relational and Financial. Across the themes survivors reported that industry and company response varied greatly, ranging from generous support, understanding and action to make safety improvements, to little response or action and lack of attention to survivor needs. Conclusion: Planning for AMT post-accident response was identified to be lacking in scope and quality. More focused efforts are needed to assist and support the survivors as they regain both their personal and professional lives following the accident. This planning should include all stakeholders in safe transport; the individual crewmember, air medical transport companies, and the industry at large.

Relationship between road traffic accidents and conflicts recorded by drive recorders.

PubMed

Lu, Guangquan; Cheng, Bo; Kuzumaki, Seigo; Mei, Bingsong

2011-08-01

Road traffic conflicts can be used to estimate the probability of accident occurrence, assess road safety, or evaluate road safety programs if the relationship between road traffic accidents and conflicts is known. To this end, we propose a model for the relationship between road traffic accidents and conflicts recorded by drive recorders (DRs). DRs were installed in 50 cars in Beijing to collect records of traffic conflicts. Data containing 1366 conflicts were collected in 193 days. The hourly distributions of conflicts and accidents were used to model the relationship between accidents and conflicts. To eliminate time series and base number effects, we defined and used 2 parameters: average annual number of accidents per 10,000 vehicles per hour and average number of conflicts per 10,000 vehicles per hour. A model was developed to describe the relationship between the two parameters. If A(i) = average annual number of accidents per 10,000 vehicles per hour at hour i, and E(i) = average number of conflicts per 10,000 vehicles per hour at hour i, the relationship can be expressed as [Formula in text] (α>0, β>0). The average number of traffic accidents increases as the number of conflicts rises, but the rate of increase decelerates as the number of conflicts increases further. The proposed model can describe the relationship between road traffic accidents and conflicts in a simple manner. According to our analysis, the model fits the present data.

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

Reveley, Mary S.

2003-01-01

The goal of the NASA Aviation Safety Program (AvSP) is to develop and demonstrate technologies that contribute to a reduction in the aviation fatal accident rate by a factor of 5 by the year 2007 and by a factor of 10 by the year 2022. Integrated safety analysis of day-to-day operations and risks within those operations will provide an understanding of the Aviation Safety Program portfolio. Safety benefits analyses are currently being conducted. Preliminary results for the Synthetic Vision Systems (SVS) and Weather Accident Prevention (WxAP) projects of the AvSP have been completed by the Logistics Management Institute under a contract with the NASA Glenn Research Center. These analyses include both a reliability analysis and a computer simulation model. The integrated safety analysis method comprises two principal components: a reliability model and a simulation model. In the reliability model, the results indicate how different technologies and systems will perform in normal, degraded, and failed modes of operation. In the simulation, an operational scenario is modeled. The primary purpose of the SVS project is to improve safety by providing visual-flightlike situation awareness during instrument conditions. The current analyses are an estimate of the benefits of SVS in avoiding controlled flight into terrain. The scenario modeled has an aircraft flying directly toward a terrain feature. When the flight crew determines that the aircraft is headed toward an obstruction, the aircraft executes a level turn at speed. The simulation is ended when the aircraft completes the turn.

Why System Safety Professionals Should Read Accident Reports

NASA Technical Reports Server (NTRS)

Holloway, C. M.; Johnson, C. W.

2006-01-01

System safety professionals, both researchers and practitioners, who regularly read accident reports reap important benefits. These benefits include an improved ability to separate myths from reality, including both myths about specific accidents and ones concerning accidents in general; an increased understanding of the consequences of unlikely events, which can help inform future designs; a greater recognition of the limits of mathematical models; and guidance on potentially relevant research directions that may contribute to safety improvements in future systems.

Follow-up on hang gliding injuries in Colorado.

PubMed

Krissoff, W B

1976-01-01

In a period extending from July 1973 to December 1975, seven fatal hang glider accidents were recorded in Colorado, all among experienced pilots. In addition, 11 serious nonfatal injuries were reported, which may represent only a fraction of those occurring. Accidents were noted to be multifactorial, caused by (1) pilot error, (2) equipment failure, (3) terrain hazards, and (4) possible design shortcomings. Accidents can be expected to decline in frequency with improved pilot training programs, grading and regulation of sites, and standardized safety clothing. No doubt over time, the less safe standard Rogallo wing will be replaced by the more stable Superkites and controlled collapsibles, which offer a higher safety margin. In the last analysis, this sport will remain a popular yet high risk endeavor (Figs. 2 through 5).

Safety I-II, resilience and antifragility engineering: a debate explained through an accident occurring on a mobile elevating work platform.

PubMed

Martinetti, Alberto; Chatzimichailidou, Maria Mikela; Maida, Luisa; van Dongen, Leo

2018-04-24

Occupational health and safety (OHS) represents an important field of exploration for the research community: in spite of the growth of technological innovations, the increasing complexity of systems involves critical issues in terms of degradation of the safety levels. In such a situation, new safety management approaches are now mandatory in order to face the safety implications of the current technological evolutions. Along these lines, performing risk-based analysis alone seems not to be enough anymore. The evaluation of robustness, antifragility and resilience of a socio-technical system is now indispensable in order to face unforeseen events. This article will briefly introduce the topics of Safety I and Safety II, resilience engineering and antifragility engineering, explaining correlations, overlapping aspects and synergies. Secondly, the article will discuss the applications of those paradigms to a real accident, highlighting how they can challenge, stimulate and inspire research for improving OHS conditions.

Lifestyle and accidents among young drivers.

PubMed

Gregersen, N P; Berg, H Y

1994-06-01

This study covers the lifestyle component of the problems related to young drivers' accident risk. The purpose of the study is to measure the relationship between lifestyle and accident risk, and to identify specific high-risk and low-risk groups. Lifestyle is measured through a questionnaire, where 20-year-olds describe themselves and how often they deal with a large number of different activities, like sports, music, movies, reading, cars and driving, political engagement, etc. They also report their involvement in traffic accidents. With a principal component analysis followed by a cluster analysis, lifestyle profiles are defined. These profiles are finally correlated to accidents, which makes it possible to define high-risk and low-risk groups. The cluster analysis defined 15 clusters including four high-risk groups with an average overrisk of 150% and two low-risk groups with an average underrisk of 75%. The results are discussed from two perspectives. The first is the importance of theoretical understanding of the contribution of lifestyle factors to young drivers' high accident risk. The second is how the findings could be used in practical road safety measures, like education, campaigns, etc.

Systemic accident analysis: examining the gap between research and practice.

PubMed

Underwood, Peter; Waterson, Patrick

2013-06-01

The systems approach is arguably the dominant concept within accident analysis research. Viewing accidents as a result of uncontrolled system interactions, it forms the theoretical basis of various systemic accident analysis (SAA) models and methods. Despite the proposed benefits of SAA, such as an improved description of accident causation, evidence within the scientific literature suggests that these techniques are not being used in practice and that a research-practice gap exists. The aim of this study was to explore the issues stemming from research and practice which could hinder the awareness, adoption and usage of SAA. To achieve this, semi-structured interviews were conducted with 42 safety experts from ten countries and a variety of industries, including rail, aviation and maritime. This study suggests that the research-practice gap should be closed and efforts to bridge the gap should focus on ensuring that systemic methods meet the needs of practitioners and improving the communication of SAA research. Copyright © 2013 Elsevier Ltd. All rights reserved.

Explorative spatial analysis of traffic accident statistics and road mortality among the provinces of Turkey.

PubMed

Erdogan, Saffet

2009-10-01

The aim of the study is to describe the inter-province differences in traffic accidents and mortality on roads of Turkey. Two different risk indicators were used to evaluate the road safety performance of the provinces in Turkey. These indicators are the ratios between the number of persons killed in road traffic accidents (1) and the number of accidents (2) (nominators) and their exposure to traffic risk (denominator). Population and the number of registered motor vehicles in the provinces were used as denominators individually. Spatial analyses were performed to the mean annual rate of deaths and to the number of fatal accidents that were calculated for the period of 2001-2006. Empirical Bayes smoothing was used to remove background noise from the raw death and accident rates because of the sparsely populated provinces and small number of accident and death rates of provinces. Global and local spatial autocorrelation analyses were performed to show whether the provinces with high rates of deaths-accidents show clustering or are located closer by chance. The spatial distribution of provinces with high rates of deaths and accidents was nonrandom and detected as clustered with significance of P<0.05 with spatial autocorrelation analyses. Regions with high concentration of fatal accidents and deaths were located in the provinces that contain the roads connecting the Istanbul, Ankara, and Antalya provinces. Accident and death rates were also modeled with some independent variables such as number of motor vehicles, length of roads, and so forth using geographically weighted regression analysis with forward step-wise elimination. The level of statistical significance was taken as P<0.05. Large differences were found between the rates of deaths and accidents according to denominators in the provinces. The geographically weighted regression analyses did significantly better predictions for both accident rates and death rates than did ordinary least regressions, as indicated by adjusted R(2) values. Geographically weighted regression provided values of 0.89-0.99 adjusted R(2) for death and accident rates, compared with 0.88-0.95, respectively, by ordinary least regressions. Geographically weighted regression has the potential to reveal local patterns in the spatial distribution of rates, which would be ignored by the ordinary least regression approach. The application of spatial analysis and modeling of accident statistics and death rates at provincial level in Turkey will help to identification of provinces with outstandingly high accident and death rates. This could help more efficient road safety management in Turkey.

Management, Acquisition, and Use of Motor Vehicles

DTIC Science & Technology

1994-03-01

CHAPTER 10. SAFETY , ACCIDENT PREVENTION , AND REPORTING Section 10-1. General ................................................ 10-1 Section 10-2. Policy...10-6. Safety and Accident Prevention ........................... 10-2 CHAPTER 11. IDENTIFICATION AND MARKING OF MOTOR VEHICLES VEHICLE MARKING...points to warrant disciplinary action consideration. 9-5 C 1 SAFETY . ACCIDENT PREVENTION . AND REPORTING 10-1. General. This Chapter contains policies

Health and Safety. Supervising: Industrial Relations. The Choice Series #84. A Self Learning Opportunity.

ERIC Educational Resources Information Center

McCall, Matthew S.

This student guide is intended to assist persons employed as supervisors in understanding and practicing principles of occupational health and safety. Discussed in the first three sections are the following topics: health and safety at work (causes of accidents, ways of dealing with and reporting accidents, procedures for preventing accidents and…

Safety Education. A Guide To Help Prevent Accidents Associated with the Home, Student Transportation, Disasters, Pedestrians, Passengers, Fires, Consumerism, Recreation.

ERIC Educational Resources Information Center

Texas Education Agency, Austin.

This teacher's guide presents 10 instructional units for one portion of the Texas-approved course in driver and safety education. The units cover the following topics: what is safety?; accident causation and prevention; home safety; student transportation safety; disasters; pedestrian safety; passenger safety; fire safety; consumer safety; and…

Review of Regulatory Emphasis on Transportation Safety in the United States, 2002-2009: Public versus Private Modes.

PubMed

Waycaster, Garrett C; Matsumura, Taiki; Bilotkach, Volodymyr; Haftka, Raphael T; Kim, Nam H

2018-05-01

The U.S. Department of Transportation is responsible for implementing new safety improvements and regulations with the goal of ensuring limited funds are distributed to where they can have the greatest impact on safety. In this work, we conduct a study of new regulations and other reactions (such as recalls) to fatal accidents in several different modes of transportation implemented from 2002 to 2009. We find that in the safest modes of commercial aviation and bus transport, the amount of spending on new regulations is high in relation to the number of fatalities compared to the regulatory attention received by less safe modes of general aviation and private automobiles. Additionally, we study two major fatal accident investigations from commercial aviation and two major automotive recalls associated with fatal accidents. We find differences in the cost per expected fatality prevented for these reactions, with the airline accident investigations being more cost effective. Overall, we observe trends in both the automotive and aviation sectors that suggest that public transportation receives more regulatory attention than private transport. We also observe that the types of safety remedies utilized, regulation versus investigation, have varying levels of effectiveness in different transport modes. We suggest that these differences are indicative of increased public demand for safety in modes where a third party may be held responsible, even for those not participating in the transportation. These findings have important implications for the transportation industry, policymakers, and for estimating the public demand for safety in new transport modes. © 2017 Society for Risk Analysis.

Bicycle Use and Cyclist Safety Following Boston’s Bicycle Infrastructure Expansion, 2009–2012

PubMed Central

Angriman, Federico; Bellows, Alexandra L.; Taylor, Kathryn

2016-01-01

Objectives. To evaluate changes in bicycle use and cyclist safety in Boston, Massachusetts, following the rapid expansion of its bicycle infrastructure between 2007 and 2014. Methods. We measured bicycle lane mileage, a surrogate for bicycle infrastructure expansion, and quantified total estimated number of commuters. In addition, we calculated the number of reported bicycle accidents from 2009 to 2012. Bicycle accident and injury trends over time were assessed via generalized linear models. Multivariable logistic regression was used to examine factors associated with bicycle injuries. Results. Boston increased its total bicycle lane mileage from 0.034 miles in 2007 to 92.2 miles in 2014 (P < .001). The percentage of bicycle commuters increased from 0.9% in 2005 to 2.4% in 2014 (P = .002) and the total percentage of bicycle accidents involving injuries diminished significantly, from 82.7% in 2009 to 74.6% in 2012. The multivariable logistic regression analysis showed that for every 1-year increase in time from 2009 to 2012, there was a 14% reduction in the odds of being injured in an accident. Conclusions. The expansion of Boston’s bicycle infrastructure was associated with increases in both bicycle use and cyclist safety. PMID:27736203

Measures for the Safe Operation of Anchoring in a Storm

NASA Astrophysics Data System (ADS)

Han, Tianding; Ai, Wanzheng

2018-01-01

The collision and stranding of ship other shipwreck accidents are mainly caused by the ship dragging. As the water is less in coastal areas, anchoring has less influence on cementing ship, so strong wind is the most important factor for ship anchoring. Therefore, it is very important to study the safety evaluation of mooring in strong wind. In this paper, the measures taken after the ship anchoring is come up with from the analysis on the typical accidents and causes of anchoring security. The safety measures at the time of anchoring are also studied.

Corporate cost of occupational accidents: an activity-based analysis.

PubMed

Rikhardsson, Pall M; Impgaard, Martin

2004-03-01

The systematic accident cost analysis (SACA) project was carried out during 2001 by The Aarhus School of Business and PricewaterhouseCoopers Denmark with financial support from The Danish National Working Environment Authority. Its focused on developing and testing a method for evaluating occupational costs of companies for use by occupational health and safety professionals. The method was tested in nine Danish companies within three different industry sectors and the costs of 27 selected occupational accidents in these companies were calculated. One of the main conclusions is that the SACA method could be used in all of the companies without revisions. The evaluation of accident cost showed that 2/3 of the costs of occupational accidents are visible in the Danish corporate accounting systems reviewed while 1/3 is hidden from management view. The highest cost of occupational accidents for a company with 3.600 employees was estimated to approximately US$ 682.000. The paper includes an introduction regarding accident cost analysis in companies, a presentation of the SACA project methodology and the SACA method itself, a short overview of some of the results of the SACA project and a conclusion. Further information about the project is available at http://www.asb.dk/saca.

Utilization of sonar technology and microcontroller towards reducing aviation hazards during ground handling of aircraft

NASA Astrophysics Data System (ADS)

Khanam, Mosammat Samia; Biswas, Debasish; Rashid, Mohsina; Salam, Md Abdus

2017-12-01

Safety is one of the most important factors in the field of aviation. Though, modern aircraft are equipped with many instruments/devices to enhance the flight safety but it is seen that accidents/incidents are never reduced to zero. Analysis of the statistical summary of Commercial Jet Airplane accidents highlights that fatal accidents that occurred worldwide from 2006 through 2015 is 11% during taxing, loading/unloading, parking and towing. Human, handling the aircrafts is one of the most important links in aircraft maintenance and hence play a significant role in aviation safety. Effort has been made in this paper to obviate human error in aviation and outline an affordable system that monitors the uneven surface &obstacles for safe "towing in" and "towing out" of an aircraft by the ground crew. The system revolves around implementation of sonar technology by microcontroller. Ultrasonic sensors can be installed on aircraft wings and tail section to identify the uneven surface &obstacles ahead and provide early warning to the maintenance ground crews.

The Human Factors of an Early Space Accident: Flight 3-65 of the X-15

NASA Technical Reports Server (NTRS)

Barshi, Immanuel; Statler, Irving C.; Orr, Jeb S.

2015-01-01

The X-15 was a critical research vehicle in the early days of space flight. On November 15, 1967, the X-15-3 suffered an in-flight breakup. This 191st flight of the X-15 and the 65th flight of this third configuration was the only fatal accident of the X-15 program. This paper presents an analysis, from a human factors perspective, of the events that led up to the accident. The analysis is based on the information contained in the report of the Air Force-NASA Accident Investigation Board (AIB) dated January, 1968. The AIBs analysis addressed, primarily, the events that occurred subsequent to the pilots taking direct control of the reaction control system. The analysis described here suggests that all of the events that caused the accident occurred well before the moment when the pilot switched to direct control. Consequently, the analyses and conclusions regarding the causal factors of, and the contributing factors to, the loss of Flight 3-65 presented here differ from those of the AIB based on the same evidence. Although the accident occurred in 1967, the results of the presented analysis are still relevant today. We present our analysis and discuss its implications for the safety of space operations.

The Human Factors of an Early Space Accident: Flight 3-65 of the X-15

NASA Technical Reports Server (NTRS)

Barshi, Immanuel; Statler, Irving C.; Orr, Jeb S.

2016-01-01

The X-15 was a critical research vehicle in the early days of space flight. On November 15, 1967, the X-15-3 suffered an in-flight breakup. This 191st flight of the X-15 and the 65th flight of this third configuration was the only fatal accident of the X-15 program. This paper presents an analysis, from a human factors perspective, of the events that led up to the accident. The analysis is based on the information contained in the report of the Air Force-NASA Accident Investigation Board (AIB) dated January, 1968. The AIBs analysis addressed, primarily, the events that occurred subsequent to the pilot's taking direct control of the reaction control system. The analysis described here suggests that, rather than events following the pilot's switch to direct control, it was the events preceding the switch that led to the accident. Consequently, the analyses and conclusions regarding the causal factors of, and the contributing factors to, the loss of Flight 3-65 presented here differ from those of the AIB based on the same evidence. Although the accident occurred in 1967, the results of the presented analysis are still relevant today. We present our analysis and discuss its implications for the safety of space operations.

Best Practices for Optimizing DoD Contractor Safety and Occupational Health Program Performance

DTIC Science & Technology

2012-12-01

such as Accident Prevention Plan (APP), Activity Hazard Analysis (AHA), Quality Assurance Surveillance Plans (QASP), etc. Contract administration...technology support, medical , and maintenance of equipment and facilities. The DoD Guidebook for the Acquisition of Services, provides acquisition...OSHA regulations and perform in accordance with an applicable accident prevention program that complies with State and Federal requirements. The

Risk-based design of process plants with regard to domino effects and land use planning.

PubMed

Khakzad, Nima; Reniers, Genserik

2015-12-15

Land use planning (LUP) as an effective and crucial safety measure has widely been employed by safety experts and decision makers to mitigate off-site risks posed by major accidents. Accordingly, the concept of LUP in chemical plants has traditionally been considered from two perspectives: (i) land developments around existing chemical plants considering potential off-site risks posed by major accidents and (ii) development of existing chemical plants considering nearby land developments and the level of additional off-site risks the land developments would be exposed to. However, the attempts made to design chemical plants with regard to LUP requirements have been few, most of which have neglected the role of domino effects in risk analysis of major accidents. To overcome the limitations of previous work, first, we developed a Bayesian network methodology to calculate both on-site and off-site risks of major accidents while taking domino effects into account. Second, we combined the results of risk analysis with Analytic Hierarchical Process to design an optimal layout for which the levels of on-site and off-site risks would be minimum. Copyright © 2015 Elsevier B.V. All rights reserved.

[Model of Analysis and Prevention of Accidents - MAPA: tool for operational health surveillance].

PubMed

de Almeida, Ildeberto Muniz; Vilela, Rodolfo Andrade de Gouveia; da Silva, Alessandro José Nunes; Beltran, Sandra Lorena

2014-12-01

The analysis of work-related accidents is important for accident surveillance and prevention. Current methods of analysis seek to overcome reductionist views that see these occurrences as simple events explained by operator error. The objective of this paper is to analyze the Model of Analysis and Prevention of Accidents (MAPA) and its use in monitoring interventions, duly highlighting aspects experienced in the use of the tool. The descriptive analytical method was used, introducing the steps of the model. To illustrate contributions and or difficulties, cases where the tool was used in the context of service were selected. MAPA integrates theoretical approaches that have already been tried in studies of accidents by providing useful conceptual support from the data collection stage until conclusion and intervention stages. Besides revealing weaknesses of the traditional approach, it helps identify organizational determinants, such as management failings, system design and safety management involved in the accident. The main challenges lie in the grasp of concepts by users, in exploring organizational aspects upstream in the chain of decisions or at higher levels of the hierarchy, as well as the intervention to change the determinants of these events.

Analysis of Occupational Accidents in Underground and Surface Mining in Spain Using Data-Mining Techniques

PubMed Central

Sanmiquel, Lluís; Bascompta, Marc; Rossell, Josep M.; Anticoi, Hernán Francisco; Guash, Eduard

2018-01-01

An analysis of occupational accidents in the mining sector was conducted using the data from the Spanish Ministry of Employment and Social Safety between 2005 and 2015, and data-mining techniques were applied. Data was processed with the software Weka. Two scenarios were chosen from the accidents database: surface and underground mining. The most important variables involved in occupational accidents and their association rules were determined. These rules are composed of several predictor variables that cause accidents, defining its characteristics and context. This study exposes the 20 most important association rules in the sector—either surface or underground mining—based on the statistical confidence levels of each rule as obtained by Weka. The outcomes display the most typical immediate causes, along with the percentage of accidents with a basis in each association rule. The most important immediate cause is body movement with physical effort or overexertion, and the type of accident is physical effort or overexertion. On the other hand, the second most important immediate cause and type of accident are different between the two scenarios. Data-mining techniques were chosen as a useful tool to find out the root cause of the accidents. PMID:29518921

Analysis of Occupational Accidents in Underground and Surface Mining in Spain Using Data-Mining Techniques.

PubMed

Sanmiquel, Lluís; Bascompta, Marc; Rossell, Josep M; Anticoi, Hernán Francisco; Guash, Eduard

2018-03-07

An analysis of occupational accidents in the mining sector was conducted using the data from the Spanish Ministry of Employment and Social Safety between 2005 and 2015, and data-mining techniques were applied. Data was processed with the software Weka. Two scenarios were chosen from the accidents database: surface and underground mining. The most important variables involved in occupational accidents and their association rules were determined. These rules are composed of several predictor variables that cause accidents, defining its characteristics and context. This study exposes the 20 most important association rules in the sector-either surface or underground mining-based on the statistical confidence levels of each rule as obtained by Weka. The outcomes display the most typical immediate causes, along with the percentage of accidents with a basis in each association rule. The most important immediate cause is body movement with physical effort or overexertion, and the type of accident is physical effort or overexertion. On the other hand, the second most important immediate cause and type of accident are different between the two scenarios. Data-mining techniques were chosen as a useful tool to find out the root cause of the accidents.

77 FR 45417 - Pipeline Safety: Inspection and Protection of Pipeline Facilities After Railway Accidents

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Accidents AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. [[Page 45418

Asking Students about the Importance of Safety Skills Instruction: A Preliminary Analysis of What They Think Is Important

ERIC Educational Resources Information Center

Agran, Martin; Krupp, Michael; Spooner, Fred; Zakas, Tracie-Lynn

2012-01-01

Although the importance of safety skills instruction is well acknowledged and available data suggest individuals with varying disabilities sustain injuries from accidents at a rate that is comparable to or may exceed the normative population, many students do not receive systematic safety skills instruction. Findings on the extent to which…

Selecting Strategies to Reduce High-Risk Unsafe Work Behaviors Using the Safety Behavior Sampling Technique and Bayesian Network Analysis.

PubMed

Ghasemi, Fakhradin; Kalatpour, Omid; Moghimbeigi, Abbas; Mohammadfam, Iraj

2017-03-04

High-risk unsafe behaviors (HRUBs) have been known as the main cause of occupational accidents. Considering the financial and societal costs of accidents and the limitations of available resources, there is an urgent need for managing unsafe behaviors at workplaces. The aim of the present study was to find strategies for decreasing the rate of HRUBs using an integrated approach of safety behavior sampling technique and Bayesian networks analysis. A cross-sectional study. The Bayesian network was constructed using a focus group approach. The required data was collected using the safety behavior sampling, and the parameters of the network were estimated using Expectation-Maximization algorithm. Using sensitivity analysis and belief updating, it was determined that which factors had the highest influences on unsafe behavior. Based on BN analyses, safety training was the most important factor influencing employees' behavior at the workplace. High quality safety training courses can reduce the rate of HRUBs about 10%. Moreover, the rate of HRUBs increased by decreasing the age of employees. The rate of HRUBs was higher in the afternoon and last days of a week. Among the investigated variables, training was the most important factor affecting safety behavior of employees. By holding high quality safety training courses, companies would be able to reduce the rate of HRUBs significantly.

Safety Handbook.

ERIC Educational Resources Information Center

Montgomery County Public Schools, Rockville, MD.

Safety policies, procedures, and related information are presented in this manual to assist school personnel in a continuing program of accident prevention. Chapter 1 discusses safety education and accident prevention in general. Chapter 2 covers traffic regulations relating to school safety patrols, school bus transportation, bicycles, and…

The role of psychological factors in workplace safety.

PubMed

Kotzé, Martina; Steyn, Leon

2013-01-01

Workplace safety researchers and practitioners generally agree that it is necessary to understand the psychological factors that influence people's workplace safety behaviour. Yet, the search for reliable individual differences regarding psychological factors associated with workplace safety has lead to sparse results and inconclusive findings. The aim of this study was to investigate whether there are differences between the psychological factors, cognitive ability, personality and work-wellness of employees involved in workplace incidents and accidents and/or driver vehicle accidents and those who are not. The study population (N = 279) consisted of employees employed at an electricity supply organisation in South Africa. Mann-Whitney U-test and one-way ANOVA were conducted to determine the differences in the respective psychological factors between the groups. These results showed that cognitive ability did not seem to play a role in workplace incident/accident involvement, including driver vehicle accidents, while the wellness factors burnout and sense of coherence, as well as certain personality traits, namely conscientiousness, pragmatic and gregariousness play a statistically significant role in individuals' involvement in workplace incidents/accidents/driver vehicle accidents. Safety practitioners, managers and human resource specialists should take cognisance of the role of specifically work-wellness in workplace safety behaviour, as management can influence these negative states that are often caused by continuously stressful situations, and subsequently enhance work place safety.

Organizational safety climate and supervisor safety enforcement: Multilevel explorations of the causes of accident underreporting.

PubMed

Probst, Tahira M

2015-11-01

According to national surveillance statistics, over 3 million employees are injured each year; yet, research indicates that these may be substantial underestimates of the true prevalence. The purpose of the current project was to empirically test the hypothesis that organizational safety climate and transactional supervisor safety leadership would predict the extent to which accidents go unreported by employees. Using hierarchical linear modeling and survey data collected from 1,238 employees in 33 organizations, employee-level supervisor safety enforcement behaviors (and to a less consistent extent, organizational-level safety climate) predicted employee accident underreporting. There was also a significant cross-level interaction, such that the effect of supervisor enforcement on underreporting was attenuated in organizations with a positive safety climate. These results may benefit human resources and safety professionals by pinpointing methods of increasing the accuracy of accident reporting, reducing actual safety incidents, and reducing the costs to individuals and organizations that result from underreporting. (c) 2015 APA, all rights reserved).

"What--me worry?" "Why so serious?": a personal view on the Fukushima nuclear reactor accidents.

PubMed

Gallucci, Raymond

2012-09-01

Infrequently, it seems that a significant accident precursor or, worse, an actual accident, involving a commercial nuclear power reactor occurs to remind us of the need to reexamine the safety of this important electrical power technology from a risk perspective. Twenty-five years since the major core damage accident at Chernobyl in the Ukraine, the Fukushima reactor complex in Japan experienced multiple core damages as a result of an earthquake-induced tsunami beyond either the earthquake or tsunami design basis for the site. Although the tsunami itself killed tens of thousands of people and left the area devastated and virtually uninhabitable, much concern still arose from the potential radioactive releases from the damaged reactors, even though there was little population left in the area to be affected. As a lifelong probabilistic safety analyst in nuclear engineering, even I must admit to a recurrence of the doubt regarding nuclear power safety after Fukushima that I had experienced after Three Mile Island and Chernobyl. This article is my attempt to "recover" my personal perspective on acceptable risk by examining both the domestic and worldwide history of commercial nuclear power plant accidents and attempting to quantify the risk in terms of the frequency of core damage that one might glean from a review of operational history. © 2012 Society for Risk Analysis.

41 CFR 102-80.105 - What information must be included in an equivalent level of safety analysis?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What information must be... Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level...

Railroad safety statistics annual report 1999

DOT National Transportation Integrated Search

2000-08-01

This edition of the Railroad Safety Statistics compiles previous safety bulletins prepared by the Federal Railroad Administration (FRA). These include: the Accident/Incident Bulletin; the Highway-Rail Crossing Accident/Incident and Inventory Bulletin...

Railroad safety statistics annual report 2005

DOT National Transportation Integrated Search

2006-12-01

This edition of the Railroad Safety Statistics compiles previous safety bulletins prepared by the Federal Railroad Administration (FRA). These include: the Accident/Incident Bulletin; the Highway-Rail Crossing Accident/Incident And Inventory Bulletin...

Railroad safety statistics annual report 2003

DOT National Transportation Integrated Search

2005-10-01

This edition of the Railroad Safety Statistics compiles previous safety bulletins prepared by the Federal Railroad Administration (FRA). These include: the Accident/Incident Bulletin; the Highway-Rail Crossing Accident/Incident And Inventory Bulletin...

Railroad safety statistics annual report 2004

DOT National Transportation Integrated Search

2005-11-01

This edition of the Railroad Safety Statistics compiles previous safety bulletins prepared by the Federal Railroad Administration (FRA). These include: the Accident/Incident Bulletin; the Highway-Rail Crossing Accident/Incident And Inventory Bulletin...

Railroad safety statistics annual report 2000

DOT National Transportation Integrated Search

2001-07-01

This edition of the Railroad Safety Statistics compiles previous safety bulletins prepared by the : Federal Railroad Administration (FRA). These include: the Accident/Incident Bulletin; the : Highway-Rail Crossing Accident/Incident And Inventory Bull...

Indonesian railway accidents--utilizing Human Factors Analysis and Classification System in determining potential contributing factors.

PubMed

Iridiastadi, Hardianto; Ikatrinasari, Zulfa Fitri

2012-01-01

The prevalence of Indonesian railway accidents has not been declining, with hundreds of fatalities reported in the past decade. As an effort to help the National Transportation Safety Committee (NTSC), this study was conducted that aimed at understanding factors that might have contributed to the accidents. Human Factors Analysis and Classification System (HFACS) was utilized for this purpose. A total of nine accident reports (provided by the Indonesian NTSC) involving fatalities were studied using the technique. Results of this study indicated 72 factors that were closely related to the accidents. Of these, roughly 22% were considered as operator acts while about 39% were related to preconditions for operator acts. Supervisory represented 14% of the factors, and the remaining (about 25%) were associated with organizational factors. It was concluded that, while train drivers indeed played an important role in the accidents, interventions solely directed toward train drivers may not be adequate. A more comprehensive approach in minimizing the accidents should be conducted that addresses all the four aspects of HFACS.

[Exploratory study of road safety in Brazzaville and Pointe-Noire in Republic of the Congo].

PubMed

Batala Mpondo, Georges; Bouanga, Marianne; Saya, Yvette Marie Clarisse; Maurice, Pierre; Burigusa, Guillaume

2014-01-01

Although road accidents in the Congo are reaching alarming levels (2,720 accidents in 2010 and 3,126 accidents in 2011), especially with the massive arrival of "Jakarta" mopeds, no evaluation has been conducted to identify and understand the factors responsible for this problem. This article reports the results of an exploratory study conducted in Brazzaville and Pointe-Noire based on information collected from existing documents and by semidirective questionnaire of people from various sectors able to elucidate the problem of road safety. Using William Haddon's matrix, the parameters investigated were : road user behaviour ; environmental and technological factors ; characteristics of road accident victims ; quality of care ; intervention times and organization of prevention. This study demonstrated the absence of a road safety policy in Congo. It also showed that the main factors responsible for road accidents are behavioural (failure to wear safety belts, failure to comply with road signs, fatigue, use of a telephone while driving, etc.), followed by environmental and technological factors (insufficient traffic lights, absence of sidewalks, disorganized occupation of roads, general state of vehicles). This study shows that, in order to improve road safety in the Congo, it is essential to promote the development of national road safety policies and an action plan, intervention on the determinants of road accidents, and a change of road user behaviours (compulsory use of safety belts, ban on the use of a telephone and smoking while driving, etc.). Effective organization of the management of road accident victims and allocation of a budget to implement a road safety policy are also necessary.

Railroad safety statistics annual report 1998

DOT National Transportation Integrated Search

1999-07-01

This edition of the Railroad Safety Statistics is a composite of previous safety bulletins prepared by the Federal Railroad Administration (FRA). These include: the Accident/Incident Bulletin; the Highway-Rail Crossing Accident/Incident And Inventory...

Relationship of safety climate perceptions and job satisfaction among employees in the construction industry: the moderating role of age.

PubMed

Stoilkovska, Biljana Blaževska; Žileska Pančovska, Valentina; Mijoski, Goran

2015-01-01

This study examines the degree to which construction sector employees perceive that safety is important in their organizations/sites and how job satisfaction affects these perceptions when age is introduced as a moderator variable. Two-way analysis of variance demonstrated that job satisfaction has a strong effect on perceived management commitment to work safety and that this relationship was moderated by respondents' age. Job satisfaction was associated with perceived accident rate and safety inspection frequency, but the proposed role of age in this linkage was not confirmed. Consequently, the findings indicated that by increasing the level of job satisfaction, perceptions of these safety climate aspects proved to be more positive. The conclusion is that these relationships could further lead to a lower percentage of accidents and injuries in the workplace and better health among employees. A significant relationship between job satisfaction, age and perceived co-workers' commitment to work safety was not found.

Demonstration of fully coupled simplified extended station black-out accident simulation with RELAP-7

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Haihua; Zhang, Hongbin; Zou, Ling

2014-10-01

The RELAP-7 code is the next generation nuclear reactor system safety analysis code being developed at the Idaho National Laboratory (INL). The RELAP-7 code develop-ment effort started in October of 2011 and by the end of the second development year, a number of physical components with simplified two phase flow capability have been de-veloped to support the simplified boiling water reactor (BWR) extended station blackout (SBO) analyses. The demonstration case includes the major components for the primary system of a BWR, as well as the safety system components for the safety relief valve (SRV), the reactor core isolation cooling (RCIC)more » system, and the wet well. Three scenar-ios for the SBO simulations have been considered. Since RELAP-7 is not a severe acci-dent analysis code, the simulation stops when fuel clad temperature reaches damage point. Scenario I represents an extreme station blackout accident without any external cooling and cooling water injection. The system pressure is controlled by automatically releasing steam through SRVs. Scenario II includes the RCIC system but without SRV. The RCIC system is fully coupled with the reactor primary system and all the major components are dynamically simulated. The third scenario includes both the RCIC system and the SRV to provide a more realistic simulation. This paper will describe the major models and dis-cuss the results for the three scenarios. The RELAP-7 simulations for the three simplified SBO scenarios show the importance of dynamically simulating the SRVs, the RCIC sys-tem, and the wet well system to the reactor safety during extended SBO accidents.« less

[The incidence of accidents at work among paramedics in the years 2001-2013 based on the register of one selected hospital].

PubMed

Garus-Pakowska, Anna; Gaszyńska, Ewelina; Szatko, Franciszek

Paramedics are exposed to a number of factors that may have a direct or indirect impact on the risk of an accident at work. The aim of the study was to analyze the incidence of accidents at work among paramedics as well as to discuss risk factors and measures to prevent such cases. The data on accidents at work were obtained from unpublished internal hospital documentation. The results were subjected to statistical analysis. In the years 2001-2013 there were 40 events, including 6 collective accidents, in which 41 paramedics of the emergency department were injured. On average, around 3 accidents involving paramedics occurred each year. The accidents happened most frequently in the evening and at night and in the winter months (statistically insignificant relationship). Incorrect behavior of the paramedics was the most common cause of an accident (75.6%) and musculoskeletal injuries (75%) most frequently of upper and lower limbs (55%) were the most common effects of an accident. In none of the cases safety regulations were breached by employees or employer. Accidents among paramedics can be prevented by changing the interior design of and the medical equipment installation in the rear cabin of the ambulance, conducting regular training to upgrade the skills of paramedics and enriching their knowledge about health and safety in their widest meaning. Med Pr 2016;67(2):213-221. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Comparing the Identification of Recommendations by Different Accident Investigators Using a Common Methodology

NASA Technical Reports Server (NTRS)

Johnson, Chris W.; Oltedal, H. A.; Holloway, C. M.

2012-01-01

Accident reports play a key role in the safety of complex systems. These reports present the recommendations that are intended to help avoid any recurrence of past failures. However, the value of these findings depends upon the causal analysis that helps to identify the reasons why an accident occurred. Various techniques have been developed to help investigators distinguish root causes from contributory factors and contextual information. This paper presents the results from a study into the individual differences that can arise when a group of investigators independently apply the same technique to identify the causes of an accident. This work is important if we are to increase the consistency and coherence of investigations following major accidents.

Assessment of potential doses to workers during postulated accident conditions at the Waste Isolation Pilot Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoover, M.D.; Farrell, R.F.; Newton, G.J.

1995-12-01

The recent 1995 WIPP Safety Analysis Report (SAR) Update provided detailed analyses of potential radiation doses to members of the public at the site boundary during postulated accident scenarios at the U.S. Department of Energy`s Waste Isolation Pilot Plant (WIPP). The SAR Update addressed the complete spectrum of potential accidents associated with handling and emplacing transuranic waste at WIPP, including damage to waste drums from fires, punctures, drops, and other disruptions. The report focused on the adequacy of the multiple layers of safety practice ({open_quotes}defense-in-depth{close_quotes}) at WIPP, which are designed to (1) reduce the likelihood of accidents and (2) limitmore » the consequences of those accidents. The safeguards which contribute to defense-in-depth at WIPP include a substantial array of inherent design features, engineered controls, and administrative procedures. The SAR Update confirmed that the defense-in-depth at WIPP is adequate to assure the protection of the public and environment. As a supplement to the 1995 SAR Update, we have conducted additional analyses to confirm that these controls will also provide adequate protection to workers at the WIPP. The approaches and results of the worker dose assessment are summarized here. In conformance with the guidance of DOE Standard 3009-94, we emphasize that use of these evaluation guidelines is not intended to imply that these numbers constitute acceptable limits for worker exposures under accident conditions. However, in conjunction with the extensive safety assessment in the 1995 SAR Update, these results indicate that the Carlsbad Area Office strategy for the assessment of hazards and accidents assures the protection of workers, members of the public, and the environment.« less

Accident Analysis for the NIST Research Reactor Before and After Fuel Conversion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baek J.; Diamond D.; Cuadra, A.

Postulated accidents have been analyzed for the 20 MW D2O-moderated research reactor (NBSR) at the National Institute of Standards and Technology (NIST). The analysis has been carried out for the present core, which contains high enriched uranium (HEU) fuel and for a proposed equilibrium core with low enriched uranium (LEU) fuel. The analyses employ state-of-the-art calculational methods. Three-dimensional Monte Carlo neutron transport calculations were performed with the MCNPX code to determine homogenized fuel compositions in the lower and upper halves of each fuel element and to determine the resulting neutronic properties of the core. The accident analysis employed a modelmore » of the primary loop with the RELAP5 code. The model includes the primary pumps, shutdown pumps outlet valves, heat exchanger, fuel elements, and flow channels for both the six inner and twenty-four outer fuel elements. Evaluations were performed for the following accidents: (1) control rod withdrawal startup accident, (2) maximum reactivity insertion accident, (3) loss-of-flow accident resulting from loss of electrical power with an assumption of failure of shutdown cooling pumps, (4) loss-of-flow accident resulting from a primary pump seizure, and (5) loss-of-flow accident resulting from inadvertent throttling of a flow control valve. In addition, natural circulation cooling at low power operation was analyzed. The analysis shows that the conversion will not lead to significant changes in the safety analysis and the calculated minimum critical heat flux ratio and maximum clad temperature assure that there is adequate margin to fuel failure.« less

APT Blanket System Loss-of-Coolant Accident (LOCA) Based on Initial Conceptual Design - Case 2: with Beam Shutdown Only

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamm, L.L.

1998-10-07

This report is one of a series of reports that document normal operation and accident simulations for the Accelerator Production of Tritium (APT) blanket heat removal system. These simulations were performed for the Preliminary Safety Analysis Report. This report documents the results of simulations of a Loss-of-Flow Accident (LOFA) where power is lost to all of the pumps that circulate water in the blanket region, the accelerator beam is shut off and neither the residual heat removal nor cavity flood systems operate.

United States Department of Energy severe accident research following the Fukushima Daiichi accidents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, M. T.; Corradini, M.; Rempe, J.

The U.S. Department of Energy (DOE) has played a major role in the U.S. response to the events at Fukushima Daiichi. During the first several weeks following the accident, U.S. assistance efforts were guided by results from a significant and diverse set of analyses. In the months that followed, a coordinated analysis activity aimed at gaining a more thorough understanding of the accident sequence was completed using laboratory-developed, system-level best-estimate accident analysis codes, while a parallel analysis was conducted by U.S. industry. A comparison of predictions for Unit 1 from these two studies indicated significant differences between MAAP and MELCORmore » results for key plant parameters, such as in-core hydrogen production. On that basis, a crosswalk was completed to determine the key modeling variations that led to these differences. In parallel with these activities, it became clear that there was a need to perform a technology gap evaluation on accident-tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist given the current state of light water reactor (LWR) severe accident research and augmented by insights from Fukushima. In addition, there is growing international recognition that data from Fukushima could significantly reduce uncertainties related to severe accident progression, particularly for boiling water reactors. On these bases, a group of U. S. experts in LWR safety and plant operations was convened by the DOE Office of Nuclear Energy (DOE-NE) to complete technology gap analysis and Fukushima forensics data needs identification activities. The results from these activities were used as the basis for refining DOE-NE's severe accident research and development (R&D) plan. Finally, this paper provides a high-level review of DOE-sponsored R&D efforts in these areas, including planned activities on accident-tolerant components and accident analysis methods.« less

United States Department of Energy severe accident research following the Fukushima Daiichi accidents

DOE PAGES

Farmer, M. T.; Corradini, M.; Rempe, J.; ...

2016-11-02

The U.S. Department of Energy (DOE) has played a major role in the U.S. response to the events at Fukushima Daiichi. During the first several weeks following the accident, U.S. assistance efforts were guided by results from a significant and diverse set of analyses. In the months that followed, a coordinated analysis activity aimed at gaining a more thorough understanding of the accident sequence was completed using laboratory-developed, system-level best-estimate accident analysis codes, while a parallel analysis was conducted by U.S. industry. A comparison of predictions for Unit 1 from these two studies indicated significant differences between MAAP and MELCORmore » results for key plant parameters, such as in-core hydrogen production. On that basis, a crosswalk was completed to determine the key modeling variations that led to these differences. In parallel with these activities, it became clear that there was a need to perform a technology gap evaluation on accident-tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist given the current state of light water reactor (LWR) severe accident research and augmented by insights from Fukushima. In addition, there is growing international recognition that data from Fukushima could significantly reduce uncertainties related to severe accident progression, particularly for boiling water reactors. On these bases, a group of U. S. experts in LWR safety and plant operations was convened by the DOE Office of Nuclear Energy (DOE-NE) to complete technology gap analysis and Fukushima forensics data needs identification activities. The results from these activities were used as the basis for refining DOE-NE's severe accident research and development (R&D) plan. Finally, this paper provides a high-level review of DOE-sponsored R&D efforts in these areas, including planned activities on accident-tolerant components and accident analysis methods.« less

Aviation Safety Program: Weather Accident Prevention (WxAP) Project Overview and Status

NASA Technical Reports Server (NTRS)

Nadell, Shari-Beth

2003-01-01

This paper presents a project overview and status for the Weather Accident Prevention (WxAP) aviation safety program. The topics include: 1) Weather Accident Prevention Project Background/History; 2) Project Modifications; 3) Project Accomplishments; and 4) Project's Next Steps.

49 CFR 195.54 - Accident reports.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Accident reports. 195.54 Section 195.54 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF HAZARDOUS LIQUIDS BY PIPELINE Annual, Accident, and...

Handle Yourself with Care: An Instructor's Guide for an Accident Prevention Course for Older Americans.

ERIC Educational Resources Information Center

Lewis, Dorothea J.; Winsor, Richard J.

Accidents are the first cause of crippling and, many times, of death, among older people. To help reduce the possibility of accidents among older people, the Administration on Aging and the National Safety Council have joined in preparing this booklet--a course of instruction in safety and accident prevention for Older Americans. It spells out…

Safety Analysis and Protection Measures of the Control System of the Pulsed High Magnetic Field Facility in WHMFC

NASA Astrophysics Data System (ADS)

Shi, J. T.; Han, X. T.; Xie, J. F.; Yao, L.; Huang, L. T.; Li, L.

2013-03-01

A Pulsed High Magnetic Field Facility (PHMFF) has been established in Wuhan National High Magnetic Field Center (WHMFC) and various protection measures are applied in its control system. In order to improve the reliability and robustness of the control system, the safety analysis of the PHMFF is carried out based on Fault Tree Analysis (FTA) technique. The function and realization of 5 protection systems, which include sequence experiment operation system, safety assistant system, emergency stop system, fault detecting and processing system and accident isolating protection system, are given. The tests and operation indicate that these measures improve the safety of the facility and ensure the safety of people.

Continuously improving safety of nuclear installations: An approach to be reinforced after the Fukushima accident

NASA Astrophysics Data System (ADS)

Repussard, Jacques; Schwarz, Michel

2012-05-01

After the Three Mile Island accident in 1979 and the Chernobyl accident in 1986, the Fukushima accident shows that the probability of a core meltdown accident in an LWR (Light Water Reactor) has been largely underestimated. The consequences of such an accident are unacceptable: except in the case of TMI2 (Three Mile Island 2) large areas around the damaged plants are contaminated for decades and populations have to be relocated for long periods. This article presents the French approach which consists in improving continuously the safety of the Nuclear Power Plants (NPP) on the basis of lessons learned from operating experience and from the progress in R&D (Research and Development). It details the key role played by IRSN (Institut de radioprotection et de sûreté nucléaire), the French TSO (Technical and scientific Safety Organization), and shows how the Fukushima accident contributes to this approach in improving NPP robustness. It concludes on the necessity to keep on networking TSOs, to share knowledge as well as R&D resources, with the ultimate goal of enhancing and harmonizing nuclear safety worldwide.

[Environmental, social, and roadway vulnerability in accidents involving transportation of hazardous products: a case study of the BR-101 highway between Osório and Torres in Rio Grande do Sul State, Brazil].

PubMed

Tinoco, Maria Auxiliadora Cannarozzo; Nodari, Christine Tessele; Pereira, Kimberllyn Rosa da Silva

2016-09-19

This study aimed to assess the environmental and social vulnerability and identify critical highway stretches for accidents involving transportation of hazardous products on the BR-101 highway between the cities of Osório and Torres in Rio Grande do Sul State, Brazil. The study's approach consisted of a multiple-criteria analysis combining highway safety analysis and environmental and social vulnerability analysis in the occurrence of accidents with hazardous products, plus cartographic analysis techniques. Thirty-eight kilometers of the highway showed high vulnerability, of which 8 kilometers with critical vulnerability, associated with bridges over rivers, water uptake points, a tunnel, environmental preservation areas, and an urban area. These stretches should be prioritized when developing action plans for accident mitigation and development of public policies for this highway. This proved to be an unprecedented approach when compared to existing studies and a potentially useful tool for decision-making in emergency operations.

Government regulation of occupational safety: underground coal mine accidents 1973-75.

PubMed Central

Boden, L I

1985-01-01

The purpose of this paper is to determine the influence of federal mine safety inspections on underground coal mine accidents. An economic incentives model is developed to relate federal enforcement activities to accident rates. The determinants of accident rates are analyzed for 535 coal mines during the period 1973-75. Estimates based on these data when applied to the model indicate that increasing inspections by 25 per cent would have produced a 13 per cent decline in fatal accidents and an 18 per cent decline in disabling accidents. PMID:3985237

Government regulation of occupational safety: underground coal mine accidents 1973-75.

PubMed

Boden, L I

1985-05-01

The purpose of this paper is to determine the influence of federal mine safety inspections on underground coal mine accidents. An economic incentives model is developed to relate federal enforcement activities to accident rates. The determinants of accident rates are analyzed for 535 coal mines during the period 1973-75. Estimates based on these data when applied to the model indicate that increasing inspections by 25 per cent would have produced a 13 per cent decline in fatal accidents and an 18 per cent decline in disabling accidents.

Causes of Coal Mine Accidents in the World and Turkey.

PubMed

Küçük, Filiz Çağla Uyanusta; Ilgaz, Aslıhan

2015-04-01

Occupational accidents and occupational diseases are common in the mining sector in Turkey and throughout the world. The most common causes of accidents in coal mining are firedamp and dust explosions, landslips, mine fires, and technical failures related to transport and mechanization. An analysis of occupational accidents in the consideration of social and economic factors will let understand the real causes behind these accidents, which are said to happen inevitably due to technical deficiencies or failures. Irregular working conditions, based on profit maximization and cost minimization, are related to strategic operational preferences and public policies. Proving that accidents in mines, where occupational health and safety measures are not implemented and inspections are not done properly or at all, are caused by the fact that production is imposed to be carried out in the fastest, cheapest, and most profitable way will allow us to take steps to prevent further mine accidents.

Causes of Coal Mine Accidents in the World and Turkey

PubMed Central

Küçük, Filiz Çağla Uyanusta; Ilgaz, Aslıhan

2015-01-01

Occupational accidents and occupational diseases are common in the mining sector in Turkey and throughout the world. The most common causes of accidents in coal mining are firedamp and dust explosions, landslips, mine fires, and technical failures related to transport and mechanization. An analysis of occupational accidents in the consideration of social and economic factors will let understand the real causes behind these accidents, which are said to happen inevitably due to technical deficiencies or failures. Irregular working conditions, based on profit maximization and cost minimization, are related to strategic operational preferences and public policies. Proving that accidents in mines, where occupational health and safety measures are not implemented and inspections are not done properly or at all, are caused by the fact that production is imposed to be carried out in the fastest, cheapest, and most profitable way will allow us to take steps to prevent further mine accidents. PMID:29404108

Safety climate as a mediator between foundation climates and occupational accidents: a group-level investigation.

PubMed

Wallace, J Craig; Popp, Eric; Mondore, Scott

2006-05-01

Building on recent work in occupational safety and climate, the authors examined 2 organizational foundation climates thought to be antecedents of specific safety climate and the relationships among these climates and occupational accidents. It is believed that both foundation climates (i.e., management-employee relations and organizational support) will predict safety climate, which will in turn mediate the relationship between occupational accidents and these 2 distal foundation climates. Using a sample of 9,429 transportation workers in 253 work groups, the authors tested the proposed relationships at the group level. Results supported all hypotheses. Overall it appears that different climates have direct and indirect effects on occupational accidents.

A Comparison of Safety Culture Associated with Three Engineered Systems in Japan and the United States

NASA Astrophysics Data System (ADS)

Tokuhiro, Akira

The internationally reported nuclear criticality accident at JCO in Tokaimura, Japan has further eroded public confidence in nuclear energy, its related facilities and the (Japanese) government’s ability to handle such a crisis. The JCO accident marked the sixth nuclear-related incident since 1995. The existing state of “safety culture” is being questioned and re-evaluated at a national level. In this work the safety culture associated with engineered systems (ES) such as the automobile, commercial airplane and nuclear power plants (NPP) are evaluated based on a scale-analysis (SA), via proposition of two fundamental parameters called eigenmetrics. The identified eigenmetrics are time- (τ) and number-scales (N) describing both ES and human factors, at the individual and/or societal levels. The SA approach is appropriate because human perception of risk (POR), perception of benefit (POB) and level of (technology) acceptance (LOA) are inherently subjective, therefore “fuzzy” and rarely quantifiable in exact magnitude. POR expressed in terms of the psychometric factors “dread risk” and “unknown risk”, contain both time- and number-scale elements. The JCO accident, as well as auto-fatalities, commercial airline accidents and hypothetical NPP accidents are characterized in terms of τ, N and two additional derived parameters of relevance, Nτ and N/τ. We contend that LOA infers a POB at least two orders of magnitude larger than POR. The “amplification” influence of mass-media is also deduced as being 100 to 1000 fold the actual number of fatalities/serious injuries in a nuclear-related accident.

Safety impacts of red light cameras at signalized intersections based on cellular automata models.

PubMed

Chai, C; Wong, Y D; Lum, K M

2015-01-01

This study applies a simulation technique to evaluate the hypothesis that red light cameras (RLCs) exert important effects on accident risks. Conflict occurrences are generated by simulation and compared at intersections with and without RLCs to assess the impact of RLCs on several conflict types under various traffic conditions. Conflict occurrences are generated through simulating vehicular interactions based on an improved cellular automata (CA) model. The CA model is calibrated and validated against field observations at approaches with and without RLCs. Simulation experiments are conducted for RLC and non-RLC intersections with different geometric layouts and traffic demands to generate conflict occurrences that are analyzed to evaluate the hypothesis that RLCs exert important effects on road safety. The comparison of simulated conflict occurrences show favorable safety impacts of RLCs on crossing conflicts and unfavorable impacts for rear-end conflicts during red/amber phases. Corroborative results are found from broad analysis of accident occurrence. RLCs are found to have a mixed effect on accident risk at signalized intersections: crossing collisions are reduced, whereas rear-end collisions may increase. The specially developed CA model is found to be a feasible safety assessment tool.

Safety of high-speed guided ground transportation systems : collision avoidance and accident survivability : volume 3 : accident survivability

DOT National Transportation Integrated Search

1993-03-01

This report is the third of four volumes concerned with developing safety guidelines and specifications for high-speed guided ground transportation (HSGGT) collision avoidance and accident survivability. The overall approach taken in this study is to...

Anatomy of an Accident.

ERIC Educational Resources Information Center

Mobley, Michael

1984-01-01

The findings of industrial safety engineers in the areas of accident causation and prevention are wholly applicable to adventure programs. Adventure education instructors can use safety engineering concepts to assess the risk in a particular activity, understand factors that cause accidents, and intervene to minimize injuries and damages if…

14 CFR 91.1021 - Internal safety reporting and incident/accident response.

Code of Federal Regulations, 2010 CFR

2010-01-01

.../accident response. 91.1021 Section 91.1021 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT... incident/accident response. (a) Each program manager must establish an internal anonymous safety reporting...

Workflow interruptions, cognitive failure and near-accidents in health care.

PubMed

Elfering, Achim; Grebner, Simone; Ebener, Corinne

2015-01-01

Errors are frequent in health care. A specific model was tested that affirms failure in cognitive action regulation to mediate the influence of nurses' workflow interruptions and safety conscientiousness on near-accidents in health care. One hundred and sixty-five nurses from seven Swiss hospitals participated in a questionnaire survey. Structural equation modelling confirmed the hypothesised mediation model. Cognitive failure in action regulation significantly mediated the influence of workflow interruptions on near-accidents (p < .05). An indirect path from conscientiousness to near-accidents via cognitive failure in action regulation was also significant (p < .05). Compliance with safety regulations was significantly related to cognitive failure and near-accidents; moreover, cognitive failure mediated the association between compliance and near-accidents (p < .05). Contrary to expectations, compliance with safety regulations was not related to workflow interruptions. Workflow interruptions caused by colleagues, patients and organisational constraints are likely to trigger errors in nursing. Work redesign is recommended to reduce cognitive failure and improve safety of nurses and patients.

Occupational safety of different industrial sectors in Khartoum State, Sudan. Part 1: Safety performance evaluation.

PubMed

Zaki, Gehan R; El-Marakby, Fadia A; H Deign El-Nor, Yasser; Nofal, Faten H; Zakaria, Adel M

2012-12-01

Safety performance evaluation enables decision makers improve safety acts. In Sudan, accident records, statistics, and safety performance were not evaluated before maintenance of accident records became mandatory in 2005. This study aimed at evaluating and comparing safety performance by accident records among different cities and industrial sectors in Khartoum state, Sudan, during the period from 2005 to 2007. This was a retrospective study, the sample in which represented all industrial enterprises in Khartoum state employing 50 workers or more. All industrial accident records of the Ministry of Manpower and Health and those of different enterprises during the period from 2005 to 2007 were reviewed. The safety performance indicators used within this study were the frequency-severity index (FSI) and fatal and disabling accident frequency rates (DAFR). In Khartoum city, the FSI [0.10 (0.17)] was lower than that in Bahari [0.11 (0.21)] and Omdurman [0.84 (0.34)]. It was the maximum in the chemical sector [0.33 (0.64)] and minimum in the metallurgic sector [0.09 (0.19)]. The highest DAFR was observed in Omdurman [5.6 (3.5)] and in the chemical sector [2.5 (4.0)]. The fatal accident frequency rate in the mechanical and electrical engineering industry was the highest [0.0 (0.69)]. Male workers who were older, divorced, and had lower levels of education had the lowest safety performance indicators. The safety performance of the industrial enterprises in Khartoum city was the best. The safety performance in the chemical sector was the worst with regard to FSI and DAFR. The age, sex, and educational level of injured workers greatly affect safety performance.

Machine-related injuries in the US mining industry and priorities for safety research.

PubMed

Ruff, Todd; Coleman, Patrick; Martini, Laura

2011-03-01

Researchers at the National Institute for Occupational Safety and Health studied mining accidents that involved a worker entangled in, struck by, or in contact with machinery or equipment in motion. The motivation for this study came from the large number of severe accidents, i.e. accidents resulting in a fatality or permanent disability, that are occurring despite available interventions. Accident descriptions were taken from an accident database maintained by the United States Department of Labor, Mine Safety and Health Administration, and 562 accidents that occurred during 2000-2007 fit the search criteria. Machine-related accidents accounted for 41% of all severe accidents in the mining industry during this period. Machinery most often involved in these accidents included conveyors, rock bolting machines, milling machines and haulage equipment such as trucks and loaders. The most common activities associated with these accidents were operation of the machine and maintenance and repair. The current methods to safeguard workers near machinery include mechanical guarding around moving components, lockout/tagout of machine power during maintenance and backup alarms for mobile equipment. To decrease accidents further, researchers recommend additional efforts in the development of new control technologies, training materials and dissemination of information on best practices.

Influence Map Methodology for Evaluating Systemic Safety Issues

NASA Technical Reports Server (NTRS)

2008-01-01

"Raising the bar" in safety performance is a critical challenge for many organizations, including Kennedy Space Center. Contributing-factor taxonomies organize information about the reasons accidents occur and therefore are essential elements of accident investigations and safety reporting systems. Organizations must balance efforts to identify causes of specific accidents with efforts to evaluate systemic safety issues in order to become more proactive about improving safety. This project successfully addressed the following two problems: (1) methods and metrics to support the design of effective taxonomies are limited and (2) influence relationships among contributing factors are not explicitly modeled within a taxonomy.

A study of carburetor/induction system icing in general aviation accidents

NASA Technical Reports Server (NTRS)

Obermayer, R. W.; Roe, W. T.

1975-01-01

An assessment of the frequency and severity of carburetor/induction icing in general-aviation accidents was performed. The available literature and accident data from the National Transportation Safety Board were collected. A computer analysis of the accident data was performed. Between 65 and 90 accidents each year involve carburetor/induction system icing as a probable cause/factor. Under conditions conducive to carburetor/induction icing, between 50 and 70 percent of engine malfunction/failure accidents (exclusive of those due to fuel exhaustion) are due to carburetor/induction system icing. Since the evidence of such icing may not remain long after an accident, it is probable that the frequency of occurrence of such accidents is underestimated; therefore, some extrapolation of the data was conducted. The problem of carburetor/induction system icing is particularly acute for pilots with less than 1000 hours of total flying time. The severity of such accidents is about the same as any accident resulting from a forced landing or precautionary landing. About 144 persons, on the average, are exposed to death and injury each year in accidents involving carburetor/induction icing as a probable cause/factor.

A 26-year comparative review of United Kingdom helicopter emergency medical services crashes and serious incidents.

PubMed

Chesters, Adam; Grieve, Phillip H; Hodgetts, Timothy J

2014-04-01

The use of helicopter emergency medical services (HEMS) has increased substantially in the United Kingdom since 1987. There are currently no data on the rate of crashes and serious incidents related to HEMS in the United Kingdom. The aims of this article were to present data from a 26-year period since the start of HEMS operations in the United Kingdom and to compare them with published data from Germany, Australia, and the United States. Factors identified as affecting the safety of HEMS operations will also be discussed. A PubMed search was performed to retrieve published data on accident rates and safety discussions for international HEMS using the key words HEMS, helicopter, emergency medical services, accident, incident, and crash. The details of every helicopter crash in the United States since the beginning of HEMS operations was obtained and reviewed to identify those that involved HEMS aircraft. This novel UK information was compared with published data from three international systems. A total of 13 accidents or serious incidents involving HEMS aircraft were identified from Civil Aviation Authority records, only 1 of which was a fatal accident. It was estimated that approximately 230,000 HEMS missions occurred in the United Kingdom between 1987 and 2013, giving an absolute accident incidence of approximately 0.0057% and a fatal accident incidence of approximately 0.00043%. The accident and fatal accident rate per 10,000 missions in the United Kingdom was 0.57 and 0.04, respectively. This compares with published rates from Germany, Australia, and the United States with accident rate per 10,000 missions ranging between 0.57 and 0.75 and fatal accident rates per 10,000 missions ranging between 0.04 and 0.23. Accidents and serious incidents relating to HEMS operations in the United Kingdom have been comprehensively identified for the first time, allowing an estimation of overall accident and fatal accident rates and comparison with other countries' HEMS operations. Data collection and analysis were hampered by obscurity of data sources and poor availability of data. In a time of increasing HEMS use in the United Kingdom, it is essential to be mindful of safety, and standardization of data collection will improve focus in this important area.

Occupational Safety and Health Measures in Micro-scale Enterprises (MSEs) in Shiraz, Iran.

PubMed

Jahangiri, Mehdi; Rostamabadi, Akbar; Malekzadeh, Gholamreza; Sadi, Amin Fahandej; Hamzavi, Golnar; Rasooli, Javad; Momeni, Zahra; Ghaem, Haleh

2016-05-25

This study aimed to determine the extent of implementation of occupational safety and health measures in micro-scale enterprises (MSEs) and to assess the prevalence of occupational injuries and accidents and its relationship with occupational safety and health measures provided in the MSEs. A cross-sectional study was conducted among 595 of MSEs. An index called the Safety and Health Requirement Index (SHRI) was created and used to calculate the percentage of provided occupational safety and health measures. The relationship between the SHRI and the occurrence of occupational accidents and injuries was investigated with the independent samples t-test and one-way ANOVA. The mean SHRI score was 60.43%, which was categorized into moderate level. Of the 30.9% of enterprises that had experienced accidents and injuries, the most common types of injuries were musculoskeletal disorders and cuts, and the least common types were pulmonary and hearing problems. Results of one-way ANOVA revealed a statistically significant relationship between the mean SHRI score and industrial branch, enterprise size, and type of accident and injury. The independent samples t-test showed that the occurrence of occupational accidents and injuries was not significantly influenced by provided health and safety measures in MSEs. Given the high percentage of enterprises with very poor to poor levels for the SHRI and the high prevalence of occupational accidents and injuries among the studied MSEs, feasible protective strategies and job safety training programs are required to promote occupational health and safety in the studied MSEs.

Underreporting of maritime accidents to vessel accident databases.

PubMed

Hassel, Martin; Asbjørnslett, Bjørn Egil; Hole, Lars Petter

2011-11-01

Underreporting of maritime accidents is a problem not only for authorities trying to improve maritime safety through legislation, but also to risk management companies and other entities using maritime casualty statistics in risk and accident analysis. This study collected and compared casualty data from 01.01.2005 to 31.12.2009, from IHS Fairplay and the maritime authorities from a set of nations. The data was compared to find common records, and estimation of the true number of occurred accidents was performed using conditional probability given positive dependency between data sources, several variations of the capture-recapture method, calculation of best case scenario assuming perfect reporting, and scaling up a subset of casualty information from a marine insurance statistics database. The estimated upper limit reporting performance for the selected flag states ranged from 14% to 74%, while the corresponding estimated coverage of IHS Fairplay ranges from 4% to 62%. On average the study results document that the number of unreported accidents makes up roughly 50% of all occurred accidents. Even in a best case scenario, only a few flag states come close to perfect reporting (94%). The considerable scope of underreporting uncovered in the study, indicates that users of statistical vessel accident data should assume a certain degree of underreporting, and adjust their analyses accordingly. Whether to use correction factors, a safety margin, or rely on expert judgment, should be decided on a case by case basis. Copyright © 2011 Elsevier Ltd. All rights reserved.

Safety Study: The Performance and use of Child Restraint Systems, Seatbelts, and Air Bags for Children in Passenger Vehicles. Volume 1:Analysis

DOT National Transportation Integrated Search

1996-01-01

Despite the effectiveness of child restraints and lap/shoulder belts to reduce the likelihood of severe and fatal injuries, accidents continue to occur in which restrained children are being injured and killed. The Safety Board conducted this study t...

Health effects model for nuclear power plant accident consequence analysis. Part I. Introduction, integration, and summary. Part II. Scientific basis for health effects models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, J.S.; Moeller, D.W.; Cooper, D.W.

1985-07-01

Analysis of the radiological health effects of nuclear power plant accidents requires models for predicting early health effects, cancers and benign thyroid nodules, and genetic effects. Since the publication of the Reactor Safety Study, additional information on radiological health effects has become available. This report summarizes the efforts of a program designed to provide revised health effects models for nuclear power plant accident consequence modeling. The new models for early effects address four causes of mortality and nine categories of morbidity. The models for early effects are based upon two parameter Weibull functions. They permit evaluation of the influence ofmore » dose protraction and address the issue of variation in radiosensitivity among the population. The piecewise-linear dose-response models used in the Reactor Safety Study to predict cancers and thyroid nodules have been replaced by linear and linear-quadratic models. The new models reflect the most recently reported results of the follow-up of the survivors of the bombings of Hiroshima and Nagasaki and permit analysis of both morbidity and mortality. The new models for genetic effects allow prediction of genetic risks in each of the first five generations after an accident and include information on the relative severity of various classes of genetic effects. The uncertainty in modeloling radiological health risks is addressed by providing central, upper, and lower estimates of risks. An approach is outlined for summarizing the health consequences of nuclear power plant accidents. 298 refs., 9 figs., 49 tabs.« less

Safety concerns related to modular/prefabricated building construction.

PubMed

Fard, Maryam Mirhadi; Terouhid, Seyyed Amin; Kibert, Charles J; Hakim, Hamed

2017-03-01

The US construction industry annually experiences a relatively high rate of fatalities and injuries; therefore, improving safety practices should be considered a top priority for this industry. Modular/prefabricated building construction is a construction strategy that involves manufacturing of the whole building or some of its components off-site. This research focuses on the safety performance of the modular/prefabricated building construction sector during both manufacturing and on-site processes. This safety evaluation can serve as the starting point for improving the safety performance of this sector. Research was conducted based on Occupational Safety and Health Administration investigated accidents. The study found 125 accidents related to modular/prefabricated building construction. The details of each accident were closely examined to identify the types of injury and underlying causes. Out of 125 accidents, there were 48 fatalities (38.4%), 63 hospitalized injuries (50.4%), and 14 non-hospitalized injuries (11.2%). It was found that, the most common type of injury in modular/prefabricated construction was 'fracture', and the most common cause of accidents was 'fall'. The most frequent cause of cause (underlying and root cause) was 'unstable structure'. In this research, the accidents were also examined in terms of corresponding location, occupation, equipment as well as activities during which the accidents occurred. For improving safety records of the modular/prefabricated construction sector, this study recommends that future research be conducted on stabilizing structures during their lifting, storing, and permanent installation, securing fall protection systems during on-site assembly of components while working from heights, and developing training programmes and standards focused on modular/prefabricated construction.

A study of fatal pedestrian crashes at rural low-volume road intersections in southwest China.

PubMed

Xie, Xiaoli; Nikitas, Alexandros; Liu, Hongqi

2018-04-03

Although intersections correspond to a small proportion of the entire roadway system, they account for a disproportionally high number of fatal pedestrian crashes, especially on rural roads situated in low- and middle-income countries. This article examines pedestrian safety at rural intersections and suggests applicable accident prevention treatments by providing an in-depth analysis of 28 fatal pedestrian crashes from 8 low-volume roads in southwest China. The driving reliability and error analysis method (DREAM) is a method to support a systematic classification of accident causation information and to facilitate aggregation of that information into patterns of contributing factors. This is the first time that DREAM was used to analyze pedestrian-vehicle crashes and provide suggestions for road improvements in China. The key issues adversely affecting pedestrian safety can be organized in 4 distinctive thematic categories, namely, deficient intersection safety infrastructure, lack of pedestrian safety education, inadequate driver training, and insufficient traffic law enforcement. Given that resources for traffic safety investments in rural areas are limited, it is determined that the potential countermeasures should focus on low-cost, easily implementable, and long-lasting measures increasing the visibility and predictability of pedestrian movement and reducing speeding and irresponsible driving among drivers and risk-taking behaviors among pedestrians. Accident prevention treatments are suggested based on their suitability for rural areas in southwest China. These countermeasures include introducing better access management and traffic calming treatments, providing more opportunities for pedestrian education, and enhancing the quality of driver training and traffic law enforcement.

Safety. Unit 8: A Core Curriculum of Related Instruction for Apprentices.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Occupational and Career Curriculum Development.

The safety education unit is presented to assist apprentices to acquire a general knowledge of procedures for insuring safety on the job. The unit consists of 10 modules: (1) the Occupational Safety and Health Act: safety and health bill of rights for workers; (2) accident prevention; (3) first aid; (4) accident reports; importance, use, and how…

Safety-in-numbers: Estimates based on a sample of pedestrian crossings in Norway.

PubMed

Elvik, Rune

2016-06-01

Safety-in-numbers denotes the tendency for the risk of accident for each road user to decline as the number of road users increases. Safety-in-numbers implies that a doubling of the number of road users will be associated with less than a doubling of the number of accidents. This paper investigates safety-in-numbers in 239 pedestrian crossings in Oslo and its suburbs. Accident prediction models were fitted by means of negative binomial regression. The models indicate a very strong safety-in-numbers effect. In the final model, the coefficients for traffic volume were 0.05 for motor vehicles, 0.07 for pedestrians and 0.12 for cyclists. The coefficient for motor vehicles implies that the number of accidents is almost independent of the number of motor vehicles. The safety-in-numbers effect found in this paper is stronger than reported in any other study dealing with safety-in-numbers. It should be noted that the model explained only 21% of the systematic variation in the number of accidents. It therefore cannot be ruled out that the results are influenced by omitted variable bias. Any such bias would, however, have to be very large to eliminate the safety-in-numbers effect. Copyright © 2016 Elsevier Ltd. All rights reserved.

Environmental Risk Assessment: Spatial Analysis of Chemical Hazards and Risks in South Korea

NASA Astrophysics Data System (ADS)

Yu, H.; Heo, S.; Kim, M.; Lee, W. K.; Jong-Ryeul, S.

2017-12-01

This study identified chemical hazard and risk levels in Korea by analyzing the spatial distribution of chemical factories and accidents. The number of chemical factories and accidents in 5-km2 grids were used as the attribute value for spatial analysis. First, semi-variograms were conducted to examine spatial distribution patterns and to identify spatial autocorrelation of chemical factories and accidents. Semi-variograms explained that the spatial distribution of chemical factories and accidents were spatially autocorrelated. Second, the results of the semi-variograms were used in Ordinary Kriging to estimate chemical hazard and risk level. The level values were extracted from the Ordinary Kriging result and their spatial similarity was examined by juxtaposing the two values with respect to their location. Six peaks were identified in both the hazard and risk estimation result, and the peaks correlated with major cities in Korea. Third, the estimated hazard and risk levels were classified with geometrical interval and could be classified into four quadrants: Low Hazard and Low Risk (LHLR), Low Hazard and High Risk (LHHR), High Hazard and Low Risk (HHLR), and High Hazard and High Risk (HHHR). The 4 groups identified different chemical safety management issues in Korea; relatively safe LHLR group, many chemical reseller factories were found in HHLR group, chemical transportation accidents were in the LHHR group, and an abundance of factories and accidents were in the HHHR group. Each quadrant represented different safety management obstacles in Korea, and studying spatial differences can support the establishment of an efficient risk management plan.

Time to death analysis of road traffic accidents in relation to delta V, drunk driving, and restraint systems.

PubMed

Ju, Yonghan; Sohn, So Young

2014-01-01

The main goal of this research is to identify variables related to the expected time to death due to road traffic accidents (RTAs). Such research is expected to be useful in improving safety laws and regulations and developing new safety systems. The resulting information is crucial not only for reducing accident fatalities but for assessing related insurance policies. In this article, we analyze factors that are potentially associated with variation in the expected survival time after a road traffic accident using Weibull regression. In particular, we consider the association with alcohol involvement, delta V, and restraint systems. Our empirical results, obtained based on the NASS-CDS, indicate that the expected survival time for non-alcohol-impaired drivers is 3.23 times longer at a delta V of 50 km/h than that for alcohol-impaired drivers under the same conditions. In addition, it was observed that, even when occupants were alcohol-impaired, if they were protected by both air bags and seat belts, their expected survival time after an RTA increased 2.59-fold compared to alcohol-impaired drivers who used only seat belts. Our findings may be useful in improving road traffic safety and insurance policies by offering insights into the factors that reduce fatalities.

[Development and effect analysis of web-based instruction program to prevent elementary school students from safety accidents].

PubMed

Chung, Eun-Soon; Jeong, Ihn-Sook; Song, Mi-Gyoung

2004-06-01

This study was aimed to develop a WBI(Web Based Instruction) program on safety for 3rd grade elementary school students and to test the effects of it. The WBI program was developed using Macromedia flash MX, Adobe Illustrator 10.0 and Adobe Photoshop 7.0. The web site was http://www.safeschool.co.kr. The effect of it was tested from Mar 24, to Apr 30, 2003. The subjects were 144 students enrolled in the 3rd grade of an elementary school in Gyungju. The experimental group received the WBI program lessons while each control group received textbook-based lessons with visual presenters and maps, 3 times. Data was analyzed with descriptive statistics, and chi2 test, t-test, and repeated measure ANOVA. First, the WBI group reported a longer effect on knowledge and practice of accident prevention than the textbook-based lessons, indicating that the WBI is more effective. Second, the WBI group was better motivated to learn the accident prevention lessons, showing that the WBI is effective. As a result, the WBI group had total longer effects on knowledge, practice and motivation of accident prevention than the textbook-based instruction. We recommend that this WBI program be used in each class to provide more effective safety instruction in elementary schools.

Simulation of Hydrogen Distribution in Ignalina NPP ALS Compartments During BDBA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Babilas, Egidijus; Urbonavicius, Egidijus; Rimkevicius, Sigitas

2006-07-01

Accident Localisation System (ALS) of Ignalina NPP is a 'pressure suppression' type confinement, which protects the population, employees and environment from the radiation hazards. According to the Safety Analysis Report for Ignalina NPP {approx}110 m{sup 3} of hydrogen is released to ALS compartments during the Maximum Design Basis Accident. However in case of beyond design basis accident, when the oxidation of zirconium starts, the amount of generated hydrogen could be significantly higher. If the volume concentration of hydrogen in the compartment reaches 4%, there is a possibility for a combustible mixture to appear. To prevent the possible hydrogen accumulation inmore » the ALS of the Ignalina NPP during an accident the H{sub 2} control system is installed. The results of the performed analysis derived the places of the possible H{sub 2} accumulation in the ALS compartments during the transient processes and assessed the mixture combustibility in these places for a beyond design basis accident scenario. Such analysis of H{sub 2} distribution in the ALS of Ignalina NPP in case of BDBA was not performed before. (authors)« less

British army air corps accidents, 1991-2010: a review of contrasting decades.

PubMed

Adams, Mark S; Curry, Ian P; Gaydos, Steven J

2014-08-01

Accident investigation and review are important not only to attribute failure modes, but also mitigate risk, improve safety, and enhance capability. It was hypothesized that an interesting perspective on British Army Air Corps (AAC) rotary-wing (RW) accidents may be garnered by contrasting data from the previous two decades with a general operational (OP) shift from European theaters of conflict to operations in Southwest Asia. AAC mishaps for the period from January 1991 through December 2010 were reviewed within an air safety management system. Accidents, defined by category 4 or 5 aircraft damage or death or major injury of personnel, were selected. Analysis was conducted jointly by a minimum of two specialists in aviation medicine. There were 37 accidents that occurred in 6 differing airframes at an average rate of 2.5 per 100,000 flying hours. From 1991-2000, 25 accidents (9 OP) occurred with a rate of 2.8 per 100,000 flying hours. From 2001-2010, 12 accidents (5 OP) occurred with a rate of 2.1 per 100,000 flying hours. Aircrew human factors (HF) errors represented 84% of attributable causation for both decades. Spatial disorientation (SD) represented a higher proportion of HF-related accidents for OP flying. Despite the perception of a more difficult OP theater for the latter decade, the overall rate and the proportion of OP accidents did not differ appreciably. Rather than theater-specific threats or challenges, it has been the longstanding and prominent player of HF error and specifically SD in OP flying that has remained entrenched in the causal chain.

Child Safety: It's No Accident. An Issue Statement.

ERIC Educational Resources Information Center

Virginia State Div. for Children, Richmond.

The three major causes of injury and mortality among children in the state of Virginia are, in order of frequency, automobile-related accidents, poison ingestion, and suicide. With respect to injuries sustained in automobile accidents, adults traveling with children by car must accept responsibility for the safety of child passengers. Acute…

The Columbia Debris Loan Program; Examples of Microscopic Analysis

NASA Technical Reports Server (NTRS)

Russell, Rick; Thurston, Scott; Smith, Stephen; Marder, Arnold; Steckel, Gary

2006-01-01

Following the tragic loss of the Space Shuttle Columbia NASA formed The Columbia Recovery Office (CRO). The CRO was initially formed at the Johnson Space Center after the conclusion of recovery operations on May 1,2003 and then transferred .to the Kennedy Space Center on October 6,2003 and renamed The Columbia Recovery Office and Preservation. An integral part of the preservation project was the development of a process to loan Columbia debris to qualified researchers and technical educators. The purposes of this program include aiding in the advancement of advanced spacecraft design and flight safety development, the advancement of the study of hypersonic re-entry to enhance ground safety, to train and instruct accident investigators and to establish an enduring legacy for Space Shuttle Columbia and her crew. Along with a summary of the debris loan process examples of microscopic analysis of Columbia debris items will be presented. The first example will be from the reconstruction following the STS- 107 accident and how the Materials and Proessteesa m used microscopic analysis to confirm the accident scenario. Additionally, three examples of microstructural results from the debris loan process from NASA internal, academia and private industry will be presented.

A case study analysis to examine motorcycle crashes in Bogota, Colombia.

PubMed

Jimenez, Adriana; Bocarejo, Juan Pablo; Zarama, Roberto; Yerpez, Joël

2015-02-01

Contributory factors to motorcycle crashes vary among populations depending on several aspects such as the users' profiles, the composition and density of traffic, and the infrastructure features. A better understanding of local motorcycle crashes can be reached in those places where a comprehensive analysis is performed. This paper presents the results obtained from a case study analysis of 400 police records of accidents involving motorcycles in Bogota. To achieve a deeper level of understanding of how these accidents occur, we propose a systemic approach that uses available crash data. The methodology is inspired by accident prototypical scenarios, a tool for analysis developed in France. When grouping cases we identified three categories: solo motorcycle accidents, motorcyclist and pedestrian accidents, and accidents involving a motorcycle and another vehicle. Within these categories we undertook in-depth analyses of 32 groups of accidents obtaining valuable information to better comprehend motorcyclists' road crashes in a local context. Recurrent contributory factors in the groups of accidents include: inexperienced motorcyclists, wide urban roads that incite speeding and risky overtaking maneuvers, flowing urban roads that encourage high speed and increased interaction between vehicles, and lack of infrastructure maintenance. The results obtained are a valuable asset to define measures that will be conveniently adapted to the group of accident on which we want to act. The methodology exposed in this paper is applicable to the study of road crashes that involve all types of actors, not only the motorcyclists, and in contexts different than those presented in Bogota. Copyright © 2014 National Safety Council and Elsevier Ltd. All rights reserved.

Safety Considerations in the Chemical Process Industries

NASA Astrophysics Data System (ADS)

Englund, Stanley M.

There is an increased emphasis on chemical process safety as a result of highly publicized accidents. Public awareness of these accidents has provided a driving force for industry to improve its safety record. There has been an increasing amount of government regulation.

Analysis of Factors Determining Ergonomic Conditions of Driver's Workplace and Safety in Transport of Dangerous Goods

NASA Astrophysics Data System (ADS)

Grabarek, Iwona; Beczkowska, Sylwia

2012-09-01

The article concerns issues connected with the safety of the carriage of dangerous goods. Raising a subject was justified with the rising number of cartages of these goods and the same height of the probability of the appearance of the environmental risk and remaining road users. A specificity of the arrangement was analyzed driver-vehicleenvironment, paying special attention to ergonomic determinants of working conditions of the driver. In the article data of the National Police Headquarters concerning causes of accident involving dangerous goods in the road transport was also described. Exceeding the permissible speed, the non-observance of traffic regulations, as well as the tiredness which resulted in reducing the psychophysical efficiency for the driver were regarded as the root cause of accidents. Conducted analyses allowed to effect the preliminary selection of factors, which accepting the wrong level can constitute the cause of accidents.

The medico-legal aspects of road traffic deaths in children under 5 years of age.

PubMed

Terranova, Claudio

2015-11-01

The family tragedy that results from a child who dies in a road traffic accident may be exacerbated by judicial consequences for the adult/parent driving the vehicle, carrying the child, or responsible for properly immobilising the child in the safety device that was used. The author presents two court cases of the road traffic accident deaths of two children under the age of five years. The two cases are presented using a methodological approach, which integrates competencies in other fields into the medico-legal aspects. An analysis of the two cases provides the opportunity to discuss the driver's responsibility to properly use child safety seat and to analyse and evaluate the efficacy and limits of child restraint systems. In the two cases, the responsibility for the application of a child safety device was excluded. It was confirmed that child protective devices are not always sufficient to avoid lesions or death in road accidents that occur with significant speed or other specific dynamics. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Authorization basis supporting documentation for plutonium finishing plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, J.P., Fluor Daniel Hanford

1997-03-05

The identification and definition of the authorization basis for the Plutonium Finishing Plant (PFP) facility and operations are essential for compliance to DOE Order 5480.21, Unreviewed Safety Questions. The authorization basis, as defined in the Order, consists of those aspects of the facility design basis, i.e., the structures, systems and components (SSCS) and the operational requirements that are considered to be important to the safety of operations and are relied upon by DOE to authorize operation of the facility. These facility design features and their function in various accident scenarios are described in WHC-SD-CP-SAR-021, Plutonium Finishing Plant Final Safety Analysismore » Report (FSAR), Chapter 9, `Accident Analysis.` Figure 1 depicts the relationship of the Authorization Basis to its components and other information contained in safety documentation supporting the Authorization Basis. The PFP SSCs that are important to safety, collectively referred to as the `Safety Envelope` are discussed in various chapters of the FSAR and in WHC-SD-CP-OSR-010, Plutonium Finishing Plant Operational Safety Requirements. Other documents such as Criticality Safety Evaluation Reports (CSERS) address and support some portions of the Authorization Basis and Safety Envelope.« less

An Accident Precursor Analysis Process Tailored for NASA Space Systems

NASA Technical Reports Server (NTRS)

Groen, Frank; Stamatelatos, Michael; Dezfuli, Homayoon; Maggio, Gaspare

2010-01-01

Accident Precursor Analysis (APA) serves as the bridge between existing risk modeling activities, which are often based on historical or generic failure statistics, and system anomalies, which provide crucial information about the failure mechanisms that are actually operative in the system and which may differ in frequency or type from those in the various models. These discrepancies between the models (perceived risk) and the system (actual risk) provide the leading indication of an underappreciated risk. This paper presents an APA process developed specifically for NASA Earth-to-Orbit space systems. The purpose of the process is to identify and characterize potential sources of system risk as evidenced by anomalous events which, although not necessarily presenting an immediate safety impact, may indicate that an unknown or insufficiently understood risk-significant condition exists in the system. Such anomalous events are considered accident precursors because they signal the potential for severe consequences that may occur in the future, due to causes that are discernible from their occurrence today. Their early identification allows them to be integrated into the overall system risk model used to intbrm decisions relating to safety.

Improving Performance of the System Safety Function at Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Kiessling, Ed; Tippett, Donald D.; Shivers, Herb

2004-01-01

The Columbia Accident Investigation Board (CAIB) determined that organizational and management issues were significant contributors to the loss of Space Shuttle Columbia. In addition, the CAIB observed similarities between the organizational and management climate that preceded the Challenger accident and the climate that preceded the Columbia accident. To prevent recurrence of adverse organizational and management climates, effective implementation of the system safety function is suggested. Attributes of an effective system safety program are presented. The Marshall Space Flight Center (MSFC) system safety program is analyzed using the attributes. Conclusions and recommendations for improving the MSFC system safety program are offered in this case study.

The effects of aircraft certification rules on general aviation accidents

NASA Astrophysics Data System (ADS)

Anderson, Carolina Lenz

The purpose of this study was to analyze the frequency of general aviation airplane accidents and accident rates on the basis of aircraft certification to determine whether or not differences in aircraft certification rules had an influence on accidents. In addition, the narrative cause descriptions contained within the accident reports were analyzed to determine whether there were differences in the qualitative data for the different certification categories. The certification categories examined were: Federal Aviation Regulations Part 23, Civil Air Regulations 3, Light Sport Aircraft, and Experimental-Amateur Built. The accident causes examined were those classified as: Loss of Control, Controlled Flight into Terrain, Engine Failure, and Structural Failure. Airworthiness certification categories represent a wide diversity of government oversight. Part 23 rules have evolved from the initial set of simpler design standards and have progressed into a comprehensive and strict set of rules to address the safety issues of the more complex airplanes within the category. Experimental-Amateur Built airplanes have the least amount of government oversight and are the fastest growing segment. The Light Sport Aircraft category is a more recent certification category that utilizes consensus standards in the approval process. Civil Air Regulations 3 airplanes were designed and manufactured under simpler rules but modifying these airplanes has become lengthy and expensive. The study was conducted using a mixed methods methodology which involves both quantitative and qualitative elements. A Chi-Square test was used for a quantitative analysis of the accident frequency among aircraft certification categories. Accident rate analysis of the accidents among aircraft certification categories involved an ANCOVA test. The qualitative component involved the use of text mining techniques for the analysis of the narrative cause descriptions contained within the accident reports. The Chi-Square test indicated that there was no significant difference in the number of accidents among the different certification categories when either Controlled Flight into Terrain or Structural Failure was listed as cause. However, there was a significant difference in the frequency of accidents with regard to Loss of Control and Engine Failure accidents. The results of the ANCOVA test indicated that there was no significant difference in the accident rate with regard to Loss of Control, Controlled Flight into Terrain, or Structural Failure accidents. There was, however, a significant difference in Engine Failure accidents between Experimental-Amateur Built and the other categories.The text mining analysis of the narrative causes of Loss of Control accidents indicated that only the Civil Air Regulations 3 category airplanes had clusters of words associated with visual flight into instrument meteorological conditions. Civil Air Regulations 3 airplanes were designed and manufactured prior to the 1960s and in most cases have not been retrofitted to take advantage of newer technologies that could help prevent Loss of Control accidents. The study indicated that General Aviation aircraft certification rules do not have a statistically significant effect on aircraft accidents except for Loss of Control and Engine Failure. According to the literature, government oversight could have become an obstacle in the implementation of safety enhancing equipment that could reduce Loss of Control accidents. Oversight should focus on ensuring that Experimental-Amateur Built aircraft owners perform a functional test that could prevent some of the Engine Failure accidents.

Job safety analysis and hazard identification for work accident prevention in para rubber wood sawmills in southern Thailand.

PubMed

Thepaksorn, Phayong; Thongjerm, Supawan; Incharoen, Salee; Siriwong, Wattasit; Harada, Kouji; Koizumi, Akio

2017-11-25

We utilized job safety analysis (JSA) and hazard identification for work accident prevention in Para rubber wood sawmills, which aimed to investigate occupational health risk exposures and assess the health hazards at sawmills in the Trang Province, located in southern Thailand. We conducted a cross-sectional study which included a walk-through survey, JSA, occupational risk assessment, and environmental samplings from March through September 2015 at four Para rubber wood sawmills. We identified potential occupational safety and health hazards associated with six main processes, including: 1) logging and cutting, 2) sawing the lumber into sheets, 3) planing and re-arranging, 4) vacuuming and wood preservation, 5) drying and planks re-arranging, and 6) grading, packing, and storing. Working in sawmills was associated with high risk of wood dust and noise exposure, occupational accidents injuring hands and feet, chemicals and fungicide exposure, and injury due to poor ergonomics or repetitive work. Several high-risk areas were identified from JSA and hazard identification of the working processes, especially high wood dust and noise exposure when sawing lumber into sheets and risk of occupational accidents of the hands and feet when struck by lumber. All workers were strongly recommended to use personal protective equipment in any working processes. Exposures should be controlled using local ventilation systems and reducing noise transmission. We recommend that the results from the risk assessment performed in this study be used to create an action plan for reducing occupational health hazards in Para rubber sawmills.

Job safety analysis and hazard identification for work accident prevention in para rubber wood sawmills in southern Thailand

PubMed Central

Thepaksorn, Phayong; Thongjerm, Supawan; Incharoen, Salee; Siriwong, Wattasit; Harada, Kouji; Koizumi, Akio

2017-01-01

Objective: We utilized job safety analysis (JSA) and hazard identification for work accident prevention in Para rubber wood sawmills, which aimed to investigate occupational health risk exposures and assess the health hazards at sawmills in the Trang Province, located in southern Thailand. Methods: We conducted a cross-sectional study which included a walk-through survey, JSA, occupational risk assessment, and environmental samplings from March through September 2015 at four Para rubber wood sawmills. Results: We identified potential occupational safety and health hazards associated with six main processes, including: 1) logging and cutting, 2) sawing the lumber into sheets, 3) planing and re-arranging, 4) vacuuming and wood preservation, 5) drying and planks re-arranging, and 6) grading, packing, and storing. Working in sawmills was associated with high risk of wood dust and noise exposure, occupational accidents injuring hands and feet, chemicals and fungicide exposure, and injury due to poor ergonomics or repetitive work. Discussion: Several high-risk areas were identified from JSA and hazard identification of the working processes, especially high wood dust and noise exposure when sawing lumber into sheets and risk of occupational accidents of the hands and feet when struck by lumber. All workers were strongly recommended to use personal protective equipment in any working processes. Exposures should be controlled using local ventilation systems and reducing noise transmission. We recommend that the results from the risk assessment performed in this study be used to create an action plan for reducing occupational health hazards in Para rubber sawmills. PMID:28993571

We are all safer : NTSB-inspired improvements in transportation safety : second edition

DOT National Transportation Integrated Search

1998-07-01

The National Transportation Safety Board (NTSB) was established by Congress in 1967 to investigate and determine the causes of accidents in all modes of transportation. Since then, the Safety Board has investigated more than 110,000 aviation accident...

78 FR 14877 - Pipeline Safety: Incident and Accident Reports

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-07

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2013-0028] Pipeline Safety: Incident and Accident Reports AGENCY: Pipeline and Hazardous Materials... PHMSA F 7100.2--Incident Report--Natural and Other Gas Transmission and Gathering Pipeline Systems and...

Occupational Safety and Health Measures in Micro-scale Enterprises (MSEs) in Shiraz, Iran

PubMed Central

Jahangiri, Mehdi; Rostamabadi, Akbar; Malekzadeh, Gholamreza; Sadi, Amin Fahandej; Hamzavi, Golnar; Rasooli, Javad; Momeni, Zahra; Ghaem, Haleh

2016-01-01

Objectives: This study aimed to determine the extent of implementation of occupational safety and health measures in micro-scale enterprises (MSEs) and to assess the prevalence of occupational injuries and accidents and its relationship with occupational safety and health measures provided in the MSEs. Method: A cross-sectional study was conducted among 595 of MSEs. An index called the Safety and Health Requirement Index (SHRI) was created and used to calculate the percentage of provided occupational safety and health measures. The relationship between the SHRI and the occurrence of occupational accidents and injuries was investigated with the independent samples t-test and one-way ANOVA. Results: The mean SHRI score was 60.43%, which was categorized into moderate level. Of the 30.9% of enterprises that had experienced accidents and injuries, the most common types of injuries were musculoskeletal disorders and cuts, and the least common types were pulmonary and hearing problems. Results of one-way ANOVA revealed a statistically significant relationship between the mean SHRI score and industrial branch, enterprise size, and type of accident and injury. The independent samples t-test showed that the occurrence of occupational accidents and injuries was not significantly influenced by provided health and safety measures in MSEs. Conclusion: Given the high percentage of enterprises with very poor to poor levels for the SHRI and the high prevalence of occupational accidents and injuries among the studied MSEs, feasible protective strategies and job safety training programs are required to promote occupational health and safety in the studied MSEs. PMID:27010083

Thermal-hydraulic analysis of N Reactor graphite and shield cooling system performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Low, J.O.; Schmitt, B.E.

1988-02-01

A series of bounding (worst-case) calculations were performed using a detailed hydrodynamic RELAP5 model of the N Reactor graphite and shield cooling system (GSCS). These calculations were specifically aimed to answer issues raised by the Westinghouse Independent Safety Review (WISR) committee. These questions address the operability of the GSCS during a worst-case degraded-core accident that requires the GDCS to mitigate the consequences of the accident. An accident scenario previously developed was designed as the hydrogen-mitigation design-basis accident (HMDBA). Previous HMDBA heat transfer analysis,, using the TRUMP-BD code, was used to define the thermal boundary conditions that the GSDS may bemore » exposed to. These TRUMP/HMDBA analysis results were used to define the bounding operating conditions of the GSCS during the course of an HMDBA transient. Nominal and degraded GSCS scenarios were investigated using RELAP5 within or at the bounds of the HMDBA transient. 10 refs., 42 figs., 10 tabs.« less

Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry

PubMed Central

Yoon, Seok J.; Lin, Hsing K.; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

2013-01-01

Background The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. Methods The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became widely available, were analyzed to understand the effect of OHSMS on the work-related injury rates in the construction industry. The Korea Occupational Safety and Health Agency 18001 is the certification to these companies performing OHSMS in South Korea. The questionnaire was created to analyze the differences of OHSMS awareness between site general managers and OHS managers of construction companies. Results The implementation of OHSMS among the top 100 construction companies in South Korea shows that the accident rate decreased by 67% and the fatal accident rate decreased by 10.3% during the period from 2006 to 2011. The survey in this study shows different OHSMS awareness levels between site general managers and OHS managers. The differences were motivation for developing OHSMS, external support needed for implementing OHSMS, problems and effectiveness of implementing OHSMS. Conclusion Both work-related accident and fatal accident rates were found to be significantly reduced by implementing OHSMS in this study. The differences of OHSMS awareness between site general managers and OHS managers were identified through a survey. The effect of these differences on safety and other benefits warrants further research with proper data collection. PMID:24422176

Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry.

PubMed

Yoon, Seok J; Lin, Hsing K; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

2013-12-01

The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became widely available, were analyzed to understand the effect of OHSMS on the work-related injury rates in the construction industry. The Korea Occupational Safety and Health Agency 18001 is the certification to these companies performing OHSMS in South Korea. The questionnaire was created to analyze the differences of OHSMS awareness between site general managers and OHS managers of construction companies. The implementation of OHSMS among the top 100 construction companies in South Korea shows that the accident rate decreased by 67% and the fatal accident rate decreased by 10.3% during the period from 2006 to 2011. The survey in this study shows different OHSMS awareness levels between site general managers and OHS managers. The differences were motivation for developing OHSMS, external support needed for implementing OHSMS, problems and effectiveness of implementing OHSMS. Both work-related accident and fatal accident rates were found to be significantly reduced by implementing OHSMS in this study. The differences of OHSMS awareness between site general managers and OHS managers were identified through a survey. The effect of these differences on safety and other benefits warrants further research with proper data collection.

Personal factors and working conditions as predictors of work injuries among industrial workers.

PubMed

Kamel, M I; Atta, H Y; Foda, N T; Mostafa, Y A; Youssef, R M

1998-01-01

The purpose of this study was to determine the personal factors and working conditions that predict work injuries among industrial workers. To fulfill this aim, a case control study was conducted including 2003 industrial workers who sustained a work injury and an equal number of controls. All were subjected to an interview questionnaire to collect relevant information. Moreover, records were reviewed to obtain the medical history of enrolled workers. Data revealed that workers in the index and control groups are comparable in respect to their sociodemographic characteristics. The multivariate logistic regression analysis pointed out that safety training significantly reduces the risk of work accidents among industrial workers. On the other hand, work accidents are more likely to occur in the main working shift. Moreover, workers who suffer from chronic health problems calling for surgical treatment, as well as those who reported family problems, are more likely to experience work accidents. These workers should receive considerable attention to reduce the extent of work injuries. More importantly, safety-training programs are mandatory for accident prevention in industrial settings.

Designing for auto safety

NASA Technical Reports Server (NTRS)

Driver, E. T.

1971-01-01

Safety design features in the motor vehicle and highway construction fields result from systems analysis approach to prevent or lessen death, injury, and property damage results. Systems analysis considers the prevention of crashes, increased survivability in crashes, and prompt medical attention to injuries as well as other postcrash salvage measures. The interface of these system elements with the driver, the vehicle, and the environment shows that action on the vehicle system produces the greatest safety payoff through design modifications. New and amended safety standards developed through hazard analysis technique improved accident statistics in the 70'; these regulations include driver qualifications and countermeasures to identify the chronic drunken driver who is involved in more than two-thirds of all auto deaths.

Spatio-temporal patterns of hazards and their use in risk assessment and mitigation. Case study of road accidents in Romania

NASA Astrophysics Data System (ADS)

Catalin Stanga, Iulian

2013-04-01

Road accidents are among the leading causes of death in many world countries, partly as an inherent consequence of the increasing mobility of today society. The World Health Organization estimates that 1.3 million people died in road accidents in 2011, which means 186 deaths per million. The tragic picture is completed by millions of peoples experiencing different physical injuries or by the enormous social and economic costs that these events imply. Romania has one of the most unsafe road networks within the European Union, with annual averages of 9400 accidents, 8300 injuries and almost 2680 fatalities (2007-2012). An average of 141 death per million is more than twice the average fatality rate in European Union (about 60 death per million). Other specific indicators (accidents or fatalities reported to the road length, vehicle fleet size, driving license owners or adult population etc.) are even worst in the same European context. Road accidents are caused by a complex series of factors, some of them being a relatively constant premise, while others act as catalyzing factors or triggering agent: road features and quality, vehicle technical state, weather conditions, human related factors etc. All these lead to a complex equation with too many unknown variables, making almost impossible a probabilistic approach. However, the high concentration of accidents in a region or in some road sectors is caused by the existence of a specific context, created by factors with permanent or repetitive character, and leads to the idea of a spatial autocorrelation between locations of different adjoining accident. In the same way, the increasing frequency of road accidents and of their causes repeatability in different periods of the year would allow to identify those black timeframes with higher incidence of road accidents. Identifying and analyzing the road blackspots (hotspots) and black zones would help to improve road safety by acting against the common causes that create the spatial or temporal clustering of crash accidents. Since the 1990's, Geographical Informational Systems (GIS) became a very important tool for traffic and road safety management, allowing not only the spatial and multifactorial analysis, but also graphical and non-graphical outputs. The current paper presents an accessible GIS methodology to study the spatio-temporal pattern of injury related road accidents, to identify the high density accidents zones, to make a cluster analysis, to create multicriterial typologies, to identify spatial and temporal similarities and to explain them. In this purpose, a Geographical Information System was created, allowing a complex analysis that involves not only the events, but also a large set of interrelated and spatially linked attributes. The GIS includes the accidents as georeferenced point elements with a spatially linked attribute database: identification information (date, location details); accident type; main, secondary and aggravating causes; data about driver; vehicle information; consequences (damages, injured peoples and fatalities). Each attribute has its own number code that allows both the statistical analysis and the spatial interrogation. The database includes those road accidents that led to physical injuries and loss of human lives between 2007 and 2012 and the spatial analysis was realized using TNTmips 7.3 software facilities. Data aggregation and processing allowed creating the spatial pattern of injury related road accidents through Kernel density estimation at three different levels (national - Romania; county level - Iasi County; local level - Iasi town). Spider graphs were used to create the temporal pattern or road accidents at three levels (daily, weekly and monthly) directly related to their causes. Moreover the spatial and temporal database relates the natural hazards (glazed frost, fog, and blizzard) with the human made ones, giving the opportunity to evaluate the nature of uncertainties in risk assessment. At the end, this paper provides a clustering methodology based on several environmental indicators intended to classify the spatial and temporal hotspots of road traffic insecurity. The results are a useful guide for planners and decision makers in developing effective road safety strategies and measures.

The role of OSHA violations in serious workplace accidents.

PubMed

Mendeloff, J

1984-05-01

California accident investigations for 1976 show that violations of the Occupational Safety and Health Administration's safety standards were a contributing factor in 13% to 19% of the 645 deaths reported to the workers' compensation program during that year. However, a panel of safety engineers judged that only about 50% of these violations could have been detected if an inspector had visited the day before the accident. These findings indicate that the potential gains from stronger enforcement of current standards are limited but not insignificant. The likelihood that a violation contributed to a serious accident varied considerably among accident types, industries, and size classes of plants. These findings can be used to increase the efficiency and effectiveness of the OSHA program by means of better targeting of inspections and accident investigations, more intelligent assessment of which violations should be penalized most heavily, and the provision of information to employers and workers about which violations are most consequential.

Coroners' records of accidental deaths.

PubMed Central

Levene, S

1991-01-01

This study set out to provide a description of the children involved in fatal accidents and to ascertain which deaths might have been prevented and by what means. The records from a convenience sample of four coroners (jurisdictions of Inner North London, Birmingham, Bedfordshire, and Ipswich) of inquests opened in 1984-8 on children aged under 15 killed in accidents were reviewed for information on the deceased, the accident, and the injuries sustained. Altogether 225 records (150 boys, 75 girls) were examined. Accidents to pedestrians were the commonest cause of death (81 cases), and road safety engineering measures were the most likely means by which most fatalities might have been prevented. The records frequently omitted information on social circumstances, family structure, ethnic group, or the use of safety equipment. Cooperative coroners can contribute to child safety as their records are rich in information about accidents. This could be made available to parties interested in accident prevention, including community paediatricians. PMID:1953011

Overview of Energy Systems` safety analysis report programs. Safety Analysis Report Update Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility`s safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This ``Overview of Energy Systems Safety Analysis Report Programs`` Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

Transportation Safety Analysis

DOT National Transportation Integrated Search

1976-11-01

A conceptual structure was developed for a model expressing transportation accident deaths as a function of transportation activity levels. The literature and data bases were reviewed. A first-level model was developed for the following modes: highwa...

2000 traffic crash facts annual report

DOT National Transportation Integrated Search

2000-01-01

The Highway Safety Section of the Department of Roads is charged with : the collection, analysis, and publication of information about city, county, : and state motor vehicle traffic accidents in Nebraska. This publication : provides information abou...

Multi - party Game Analysis of Coal Industry and Industry Regulation Policy Optimization

NASA Astrophysics Data System (ADS)

Jiang, Tianqi

2018-01-01

In the face of the frequent occurrence of coal mine safety accidents, this paper analyses the relationship between central and local governments, coal mining enterprises and miners from the perspective of multi - group game. In the actual production, the decision of one of the three groups can affect the game strategy of the other of the three, so we should assume the corresponding game order. In this order, the game analysis of the income and decision of the three is carried out, and the game decision of the government, the enterprise and the workers is obtained through the establishment of the benefit matrix and so on. And then on the existing system to optimize the coal industry regulation proposed practical recommendations to reduce the frequency of industry safety accidents, optimize the industry production environment.

NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

NASA Technical Reports Server (NTRS)

Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

2003-01-01

The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

The Demands of Nuclear Safety: Mishaps and USSTRATCOM

DTIC Science & Technology

2011-06-01

maintenance operation—the unexpected will occur. Scott D. Sagan On 30 August 2007 the unexpected occurred. Ironically, the safety problem did... Sagan , The Limits of Safety: Organizations, Accidents, and Nuclear Weapons (Princeton, NJ: Princeton University Press, 1993), 14, 48. 39 Sagan , Limits...1 Scott D. Sagan , The Limits of Safety: Organizations, Accidents, and Nuclear Weapons (Princeton, NJ: Princeton

Lift truck safety review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cadwallader, L.C.

1997-03-01

This report presents safety information about powered industrial trucks. The basic lift truck, the counterbalanced sit down rider truck, is the primary focus of the report. Lift truck engineering is briefly described, then a hazard analysis is performed on the lift truck. Case histories and accident statistics are also given. Rules and regulations about lift trucks, such as the US Occupational Safety an Health Administration laws and the Underwriter`s Laboratories standards, are discussed. Safety issues with lift trucks are reviewed, and lift truck safety and reliability are discussed. Some quantitative reliability values are given.

Secondary school accident reporting in one education authority.

PubMed

Williams, W R; Latif, A H A; Sibert, J

2002-01-01

Secondary schools appear to have very different accident rates when they are compared on the basis of accident report returns. The variation may be as a result of real differences in accident rates or different reporting procedures. This study investigates accident reporting from secondary schools and, in particular, the role of the school nurse. Accident form returns covering a 2-year period were collected for statistical analysis from 13 comprehensive schools in one local education authority in Wales. School sites were visited in the following school year to obtain information about accident records held on site and accident reporting procedures. The main factors determining the number of school accident reports submitted to the education authority relate to differences in recording and reporting procedures, such as the employment of a nurse and the policy of the head teacher/safety officer on submitting accident returns. Accident and emergency department referrals from similar schools may show significant differences in specific injuries and their causes. The level of school accident activity cannot be gauged from reports submitted to the education authority. Lack of incentives for collecting good accident data, in conjunction with the degree of complacency in the current system, suggest that future accident rates and reporting activity are unlikely to change.

Quality evaluation of official accident reports conducted by Labour Authorities in Andalusia (Spain).

PubMed

Salguero-Caparros, Francisco; Suarez-Cebador, Manuel; Carrillo-Castrillo, Jesús A; Rubio-Romero, Juan Carlos

2018-01-01

A public accident investigation is carried out when the consequences of the incident are significant or the accident has occurred in unusual circumstances. We evaluated the quality of the official accident investigations being conducted by Safety Specialists of the Labour Authorities in Andalusia. To achieve this objective, we analysed 98 occupational accident investigations conducted by the Labour Authorities in Andalusia in the last quarter of 2014. Various phases in the accident investigation process were examined, such as the use of the Eurostat variables within European Statistics on Accidents at Work (ESAW), detection of causes, determination of preventive measures, cost analysis of the accidents, identification of noncompliance with legal requirements or the investigation method used. The results of this study show that 77% of the official occupational accident investigation reports analysed were conducted in accordance with all the quality criteria recommended in the literature. To enhance glogal learning, and optimize allocation of resources, we propose the development of a harmonized European model for the public investigation of occupational accidents. Further it would be advisable to create a common classification and coding system for the causes of accidents for all European Union Member States.

Accident Prevention: A Workers' Education Manual.

ERIC Educational Resources Information Center

International Labour Office, Geneva (Switzerland).

Devoted to providing industrial workers with a greater knowledge of precautionary measures undertaken and enforced by industries for the protection of workers, this safety education manual contains 14 lessons ranging from "The Problems of Accidents during Work" to "Trade Unions and Workers and Industrial Safety." Fire protection, safety equipment…

Review of hydrogen accidents and incidents in NASA operations

NASA Technical Reports Server (NTRS)

Ordin, P. M.

1974-01-01

A number of the accidents/incidents with hydrogen in NASA operations are reviewed. The cause factors for the mishaps are reviewed and show that although few accidents occurred, the number could have been further reduced if the established NASA rules and regulations had been followed. Requirements for effective safety codes and areas of study for hydrogen safety information are included. The report concludes with a compilation of 96 hydrogen mishaps; a description of the accidents and their causes.

Traffic accidents on expressways: new threat to China.

PubMed

Zhao, Jinbao; Deng, Wei

2012-01-01

As China is building one of the largest expressway systems in the world, expressway safety problems have become serious concerns to China. This article analyzed the trends in expressway accidents in China from 1995 to 2010 and examined the characteristics of these accidents. Expressway accident data were obtained from the Annual Report for Road Traffic Accidents published by the Ministry of Public Security of China. Expressway mileage data were obtained from the National Statistics Yearbook published by the National Bureau of Statistics of China. Descriptive statistical analyses were conducted based on these data. Expressway deaths increased by 10.2-fold from 616 persons in 1995 to 6300 persons in 2010, and the average annual increase was 17.9 percent over the past 15 years, and the overall other road traffic deaths was -0.33 percent. China's expressway mileage accounted for only 1.85 percent of highway mileage driven in 2010, but expressway deaths made up 13.54 percent of highway traffic deaths. The average annual accident lethality rate [accident deaths/(accident deaths + accident injuries)] for China's expressways was 27.76 percent during the period 1995 to 2010, which was 1.33 times higher than the accident lethality rate of highway traffic accidents. China's government should pay attention to expressway construction and safety interventions during the rapid development period of expressways. Related causes, such as geographic patterns, speeding, weather conditions, and traffic flow composition, need to be studied in the near future. An effective and scientific expressway safety management services system, composed of a speed monitoring system, warning system, and emergency rescue system, should be established in developed and underdeveloped provinces in China to improve safety on expressway.

The in-depth safety assessment (ISA) pilot projects in Ukraine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kot, C. A.

1998-02-10

Ukraine operates pressurized water reactors of the Soviet-designed type, VVER. All Ukrainian plants are currently operating with annually renewable permits until they update their safety analysis reports (SARs). After approval of the SARS by the Ukrainian Nuclear Regulatory Authority, the plants will be granted longer-term operating licenses. In September 1995, the Nuclear Regulatory Authority and the Government Nuclear Power Coordinating Committee of Ukraine issued a new contents requirement for the safety analysis reports of VVERs in Ukraine. It contains requirements in three major areas: design basis accident (DBA) analysis, probabilistic risk assessment (PRA), and beyond design-basis accident (BDBA) analysis. Themore » DBA requirements are an expanded version of the older SAR requirements. The last two requirements, on PRA and BDBA, are new. The US Department of Energy (USDOE), through the International Nuclear Safety Program (INSP), has initiated an assistance and technology transfer program to Ukraine to assist their nuclear power stations in developing a Western-type technical basis for the new SARS. USDOE sponsored In-Depth Safety Assessments (ISAs) have been initiated at three pilot nuclear reactor units in Ukraine, South Ukraine Unit 1, Zaporizhzhya Unit 5, and Rivne Unit 1. USDOE/INSP have structured the ISA program in such a way as to provide maximum assistance and technology transfer to Ukraine while encouraging and supporting the Ukrainian plants to take the responsibility and initiative and to perform the required assessments.« less

Generation III reactors safety requirements and the design solutions

NASA Astrophysics Data System (ADS)

Felten, P.

2009-03-01

Nuclear energy's public acceptance, and hence its development, depends on its safety. As a reactor designer, we will first briefly remind the basic safety principles of nuclear reactors' design. We will then show how the industry, and in particular Areva with its EPR, made design evolution in the wake of the Three Miles Island accident in 1979. In particular, for this new generation of reactors, severe accidents are taken into account beyond the standard design basis accidents. Today, Areva's EPR meets all so-called "generation III" safety requirements and was licensed by several nuclear safety authorities in the world. Many innovative solutions are integrated in the EPR, some of which will be introduced here.

Children's Acceptance of Safety Guidelines after Exposure to Televised Dramas Depicting Accidents.

ERIC Educational Resources Information Center

Cantor, Joanne; Omdahl, Becky L.

1999-01-01

Presents a study where grade-school children were exposed to a scene from a movie involving one of two activities (either fire- or water-related activities) and involving one of two outcomes (fatal accidents or neutral events). Finds that watching the dramatized accidents increased students' estimated importance of adopting safety guidelines and…

78 FR 48931 - Railroad Safety Advisory Committee; Notice of Emergency Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-12

..., Quebec, Canada. At this time, it is estimated that this accident resulted in 42 fatalities, and 5 persons... will be briefed on the preliminary findings of the accident, and discussions will involve the safety issues related to the July 6 accident. DATES: The RSAC meeting is scheduled to commence at 9:00 a.m. on...

Use of evidential reasoning and AHP to assess regional industrial safety

PubMed Central

Chen, Zhichao; Chen, Tao; Qu, Zhuohua; Ji, Xuewei; Zhou, Yi; Zhang, Hui

2018-01-01

China’s fast economic growth contributes to the rapid development of its urbanization process, and also renders a series of industrial accidents, which often cause loss of life, damage to property and environment, thus requiring the associated risk analysis and safety control measures to be implemented in advance. However, incompleteness of historical failure data before the occurrence of accidents makes it difficult to use traditional risk analysis approaches such as probabilistic risk analysis in many cases. This paper aims to develop a new methodology capable of assessing regional industrial safety (RIS) in an uncertain environment. A hierarchical structure for modelling the risks influencing RIS is first constructed. The hybrid of evidential reasoning (ER) and Analytical Hierarchy Process (AHP) is then used to assess the risks in a complementary way, in which AHP is hired to evaluate the weight of each risk factor and ER is employed to synthesise the safety evaluations of the investigated region(s) against the risk factors from the bottom to the top level in the hierarchy. The successful application of the hybrid approach in a real case analysis of RIS in several major districts of Beijing (capital of China) demonstrates its feasibility as well as provides risk analysts and safety engineers with useful insights on effective solutions to comprehensive risk assessment of RIS in metropolitan cities. The contribution of this paper is made by the findings on the comparison of risk levels of RIS at different regions against various risk factors so that best practices from the good performer(s) can be used to improve the safety of the others. PMID:29795593

Use of evidential reasoning and AHP to assess regional industrial safety.

PubMed

Chen, Zhichao; Chen, Tao; Qu, Zhuohua; Yang, Zaili; Ji, Xuewei; Zhou, Yi; Zhang, Hui

2018-01-01

China's fast economic growth contributes to the rapid development of its urbanization process, and also renders a series of industrial accidents, which often cause loss of life, damage to property and environment, thus requiring the associated risk analysis and safety control measures to be implemented in advance. However, incompleteness of historical failure data before the occurrence of accidents makes it difficult to use traditional risk analysis approaches such as probabilistic risk analysis in many cases. This paper aims to develop a new methodology capable of assessing regional industrial safety (RIS) in an uncertain environment. A hierarchical structure for modelling the risks influencing RIS is first constructed. The hybrid of evidential reasoning (ER) and Analytical Hierarchy Process (AHP) is then used to assess the risks in a complementary way, in which AHP is hired to evaluate the weight of each risk factor and ER is employed to synthesise the safety evaluations of the investigated region(s) against the risk factors from the bottom to the top level in the hierarchy. The successful application of the hybrid approach in a real case analysis of RIS in several major districts of Beijing (capital of China) demonstrates its feasibility as well as provides risk analysts and safety engineers with useful insights on effective solutions to comprehensive risk assessment of RIS in metropolitan cities. The contribution of this paper is made by the findings on the comparison of risk levels of RIS at different regions against various risk factors so that best practices from the good performer(s) can be used to improve the safety of the others.

Safety evaluation of joint and conventional lane merge configurations for freeway work zones.

PubMed

Ishak, Sherif; Qi, Yan; Rayaprolu, Pradeep

2012-01-01

Inefficient operation of traffic in work zone areas not only leads to an increase in travel time delays, queue length, and fuel consumption but also increases the number of forced merges and roadway accidents. This study evaluated the safety performance of work zones with a conventional lane merge (CLM) configuration in Louisiana. Analysis of variance (ANOVA) was used to compare the crash rates for accidents involving fatalities, injuries, and property damage only (PDO) in each of the following 4 areas: (1) advance warning area, (2) transition area, (3) work area, and (4) termination area. The analysis showed that the advance warning area had higher fatality, injury, and PDO crash rates when compared to the transition area, work area, and termination area. This finding confirmed the need to make improvements in the advance warning area where merging maneuvers take place. Therefore, a new lane merge configuration, called joint lane merge (JLM), was proposed and its safety performance was examined and compared to the conventional lane merge configuration using a microscopic simulation model (VISSIM), which was calibrated with real-world data from an existing work zone on I-55 and used to simulate a total of 25 different scenarios with different levels of demand and traffic composition. Safety performance was evaluated using 2 surrogate measures: uncomfortable decelerations and speed variance. Statistical analysis was conducted to determine whether the differences in safety performance between both configurations were significant. The safety analysis indicated that JLM outperformed CLM in most cases with low to moderate flow rates and that the percentage of trucks did not have a significant impact on the safety performance of either configuration. Though the safety analysis did not clearly indicate which lane merge configuration is safer for the overall work zone area, it was able to identify the possibly associated safety changes within the work zone area under different traffic conditions. Copyright © 2012 Taylor & Francis Group, LLC

Historical analysis of US pipeline accidents triggered by natural hazards

NASA Astrophysics Data System (ADS)

Girgin, Serkan; Krausmann, Elisabeth

2015-04-01

Natural hazards, such as earthquakes, floods, landslides, or lightning, can initiate accidents in oil and gas pipelines with potentially major consequences on the population or the environment due to toxic releases, fires and explosions. Accidents of this type are also referred to as Natech events. Many major accidents highlight the risk associated with natural-hazard impact on pipelines transporting dangerous substances. For instance, in the USA in 1994, flooding of the San Jacinto River caused the rupture of 8 and the undermining of 29 pipelines by the floodwaters. About 5.5 million litres of petroleum and related products were spilled into the river and ignited. As a results, 547 people were injured and significant environmental damage occurred. Post-incident analysis is a valuable tool for better understanding the causes, dynamics and impacts of pipeline Natech accidents in support of future accident prevention and mitigation. Therefore, data on onshore hazardous-liquid pipeline accidents collected by the US Pipeline and Hazardous Materials Safety Administration (PHMSA) was analysed. For this purpose, a database-driven incident data analysis system was developed to aid the rapid review and categorization of PHMSA incident reports. Using an automated data-mining process followed by a peer review of the incident records and supported by natural hazard databases and external information sources, the pipeline Natechs were identified. As a by-product of the data-collection process, the database now includes over 800,000 incidents from all causes in industrial and transportation activities, which are automatically classified in the same way as the PHMSA record. This presentation describes the data collection and reviewing steps conducted during the study, provides information on the developed database and data analysis tools, and reports the findings of a statistical analysis of the identified hazardous liquid pipeline incidents in terms of accident dynamics and consequences.

1999 traffic crash facts annual report

DOT National Transportation Integrated Search

1999-01-01

The Highway Safety Division of the Department of Roads is charged with the collection, analysis, and publication of information about city, county, and state motor vehicle traffic accidents in Nebraska. This publication provides information about acc...

Radiological Source Terms for Tank Farms Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

COWLEY, W.L.

2000-06-27

This document provides Unit Liter Dose factors, atmospheric dispersion coefficients, breathing rates and instructions for using and customizing these factors for use in calculating radiological doses for accident analyses in the Hanford Tank Farms.

Safety Management Information Statistics (SAMIS) - 1990 Annual Report.

DOT National Transportation Integrated Search

1992-04-01

The report is a compilation and analysis of mass transit accident and casualty statistics reported by transit systems in the United States during 1990, under the Federal Transit Administration's (FTA's) Section 15 reporting system.

1998 traffic crash facts annual report

DOT National Transportation Integrated Search

1998-01-01

The Highway Safety Division of the Department of Roads is charged with the collection, analysis, and publication of information about city, county, and state motor vehicle traffic accidents in Nebraska. This publication provides information about acc...

Factors involved in fatal vehicle crashes

DOT National Transportation Integrated Search

2010-09-01

This report examines factors that contribute to fatal crashes involving a motor vehicle (e.g., car, truck, or bus). Accident level data was obtained from the National Highway Traffic Safety Administrations (NHTSAs) Fatality Analysis Reporting S...

Accident Analyses in Support of the Sludge Water System Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

FINFROCK, S.H.

This document quantifies the potential health effects of the unmitigated hazards identified Hey (2002) for retrieval of sludge from the KE basin. It also identifies potential controls and any supporting mitigative analyses.

GIS Tools For Improving Pedestrian & Bicycle Safety

DOT National Transportation Integrated Search

2000-07-01

Geographic Information System (GIS) software turns statistical data, such as accidents, and geographic data, such as roads and crash locations, into meaningful information for spatial analysis and mapping. In this project, GIS-based analytical techni...

Farm Safety

PubMed Central

Wilson, G. S.

1966-01-01

Accident and safety are related terms; the higher the accident rate in any industry, the greater is the need for safety measures designed to prevent accidents. This article discusses the accident and safety problems in agriculture, which includes horticulture and forestry. There is still a tendency among townspeople to think of the countryside as peaceful and tranquil, a place where nothing happens very quickly and far removed from violent death or crippling injury. This pleasant rustic picture has undergone a striking change in the last 30 years owing to considerable agricultural mechanization and the development of chemical pesticides, which have brought new dangers to those who live and work on the land. Although men have readily adapted themselves to new machines and methods, they have not proved as able to recognize new dangers and learn how to guard against them. In consequence, accidents have increased to such an extent that the whole industry has realized the need for positive preventive measures. In this country, it is generally accepted that an employer of labour has a responsibility to provide safe working conditions for those he employs. Farm safety legislation goes a little further and usually requires an employer to provide necessary safeguards, with the added requirement on a worker to make use of them. It is a feature of accident prevention work that it never reaches a stage when it can be regarded as complete. Even when a reduction in accidents has been achieved, the effort must be sustained or the trend will be quickly reversed. Images PMID:5904095

National Transportation Safety Board Safety Study: Safety At Passive Grade Crossings. Volume 2: Case Summaries

DOT National Transportation Integrated Search

1998-07-07

More than 4,000 accidents have occurred at the nation's active and passive grade crossings each year from 1991 through 1996. Many of the accidents at active crossings have involved highway vehicle drivers who did not comply with train-activated warni...

Preliminary analysis of loss-of-coolant accident in Fukushima nuclear accident

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su'ud, Zaki; Anshari, Rio

Loss-of-Coolant Accident (LOCA) in Boiling Water Reactor (BWR) especially on Fukushima Nuclear Accident will be discussed in this paper. The Tohoku earthquake triggered the shutdown of nuclear power reactors at Fukushima Nuclear Power station. Though shutdown process has been completely performed, cooling process, at much smaller level than in normal operation, is needed to remove decay heat from the reactor core until the reactor reach cold-shutdown condition. If LOCA happen at this condition, it will cause the increase of reactor fuel and other core temperatures and can lead to reactor core meltdown and exposure of radioactive material to the environmentmore » such as in the Fukushima Dai Ichi nuclear accident case. In this study numerical simulation has been performed to calculate pressure composition, water level and temperature distribution on reactor during this accident. There are two coolant regulating system that operational on reactor unit 1 at this accident, Isolation Condensers (IC) system and Safety Relief Valves (SRV) system. Average mass flow of steam to the IC system in this event is 10 kg/s and could keep reactor core from uncovered about 3,2 hours and fully uncovered in 4,7 hours later. There are two coolant regulating system at operational on reactor unit 2, Reactor Core Isolation Condenser (RCIC) System and Safety Relief Valves (SRV). Average mass flow of coolant that correspond this event is 20 kg/s and could keep reactor core from uncovered about 73 hours and fully uncovered in 75 hours later. There are three coolant regulating system at operational on reactor unit 3, Reactor Core Isolation Condenser (RCIC) system, High Pressure Coolant Injection (HPCI) system and Safety Relief Valves (SRV). Average mass flow of water that correspond this event is 15 kg/s and could keep reactor core from uncovered about 37 hours and fully uncovered in 40 hours later.« less

Preliminary analysis of loss-of-coolant accident in Fukushima nuclear accident

NASA Astrophysics Data System (ADS)

Su'ud, Zaki; Anshari, Rio

2012-06-01

Loss-of-Coolant Accident (LOCA) in Boiling Water Reactor (BWR) especially on Fukushima Nuclear Accident will be discussed in this paper. The Tohoku earthquake triggered the shutdown of nuclear power reactors at Fukushima Nuclear Power station. Though shutdown process has been completely performed, cooling process, at much smaller level than in normal operation, is needed to remove decay heat from the reactor core until the reactor reach cold-shutdown condition. If LOCA happen at this condition, it will cause the increase of reactor fuel and other core temperatures and can lead to reactor core meltdown and exposure of radioactive material to the environment such as in the Fukushima Dai Ichi nuclear accident case. In this study numerical simulation has been performed to calculate pressure composition, water level and temperature distribution on reactor during this accident. There are two coolant regulating system that operational on reactor unit 1 at this accident, Isolation Condensers (IC) system and Safety Relief Valves (SRV) system. Average mass flow of steam to the IC system in this event is 10 kg/s and could keep reactor core from uncovered about 3,2 hours and fully uncovered in 4,7 hours later. There are two coolant regulating system at operational on reactor unit 2, Reactor Core Isolation Condenser (RCIC) System and Safety Relief Valves (SRV). Average mass flow of coolant that correspond this event is 20 kg/s and could keep reactor core from uncovered about 73 hours and fully uncovered in 75 hours later. There are three coolant regulating system at operational on reactor unit 3, Reactor Core Isolation Condenser (RCIC) system, High Pressure Coolant Injection (HPCI) system and Safety Relief Valves (SRV). Average mass flow of water that correspond this event is 15 kg/s and could keep reactor core from uncovered about 37 hours and fully uncovered in 40 hours later.

Analysis of Occupational Accident Fatalities and Injuries Among Male Group in Iran Between 2008 and 2012

PubMed Central

Alizadeh, Seyed Shamseddin; Mortazavi, Seyed Bagher; Sepehri, Mohammad Mehdi

2015-01-01

Background: Because of occupational accidents, permanent disabilities and deaths occur and economic and workday losses emerge. Objectives: The purpose of the present study was to investigate the factors responsible for occupational accidents occurred in Iran. Patients and Methods: The current study analyzed 1464 occupational accidents recorded by the Ministry of Labor and Social Affairs’ offices in Iran during 2008 - 2012. At first, general understanding of accidents was obtained using descriptive statistics. Afterwards, the chi-square test and Cramer’s V statistic (Vc) were used to determine the association between factors influencing the type of injury as occupational accident outcomes. Results: There was no significant association between marital status and time of day with the type of injury. However, activity sector, cause of accident, victim’s education, age of victim and victim’s experience were significantly associated with the type of injury. Conclusions: Successful accident prevention relies largely on knowledge about the causes of accidents. In any accident control activity, particularly in occupational accidents, correctly identifying high-risk groups and factors influencing accidents is the key to successful interventions. Results of this study can cause to increase accident awareness and enable workplace’s management to select and prioritize problem areas and safety system weakness in workplaces. PMID:26568848

Social-cognitive correlates of risky adolescent cycling behavior

PubMed Central

2010-01-01

Background Bicycle use entails high safety and health risks especially for adolescents. Most safety education programs aimed at adolescents focus on accident statistics and risk perceptions. This paper proposes the investigation of the social-cognitive correlates of risky cycling behaviors of adolescents prior to developing safety education programs. Method Secondary school students aged 13 to 18 years (n = 1446) filled out questionnaires regarding bicycle behavior, risky intentions, accident experience, and social-cognitive determinants as suggested by the theory of planned behavior. Results Regression analysis revealed that the proximal variables (i.e., self-efficacy, attitudes towards drunk driving, personal norm regarding safekeeping of self and others, and compared risk) were able to predict 17% of the variance of risky behavior and 23% of the variance of risky intentions. The full model explained respectively 29% and 37% of the variance in risky behavior and risky intentions. Adolescents with positive attitudes towards risky behavior and low sense of responsibility report risky behavior, even when having been (close to) an accident. Conclusions Adolescents realize whether they are risk takers or not. This implies that the focus of education programs should not be on risk perceptions, but on decreasing positive attitudes towards alcohol in traffic and increasing sense of responsibility instead. Cognitions regarding near accidents should be studied, the role of safe cycling self-efficacy is unclear. PMID:20624293

A suggested color scheme for reducing perception-related accidents on construction work sites.

PubMed

Yi, June-seong; Kim, Yong-woo; Kim, Ki-aeng; Koo, Bonsang

2012-09-01

Changes in workforce demographics have led to the need for more sophisticated approaches to addressing the safety requirements of the construction industry. Despite extensive research in other industry domains, the construction industry has been passive in exploring the impact of a color scheme; perception-related accidents have been effectively diminished by its implementation. The research demonstrated that the use of appropriate color schemes could improve the actions and psychology of workers on site, thereby increasing their perceptions of potentially dangerous situations. As a preliminary study, the objects selected by rigorous analysis on accident reports were workwear, safety net, gondola, scaffolding, and safety passage. The colors modified on site for temporary facilities were adopted from existing theoretical and empirical research that suggests the use of certain colors and their combinations to improve visibility and conspicuity while minimizing work fatigue. The color schemes were also tested and confirmed through two workshops with workers and managers currently involved in actual projects. The impacts of color schemes suggested in this paper are summarized as follows. First, the color schemes improve the conspicuity of facilities with other on site components, enabling workers to quickly discern and orient themselves in their work environment. Secondly, the color schemes have been selected to minimize the visual work fatigue and monotony that can potentially increase accidents. Copyright © 2011 Elsevier Ltd. All rights reserved.

Severe Accident Sequence Analysis Program: Anticipated transient without scram simulations for Browns Ferry Nuclear Plant Unit 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dallman, R J; Gottula, R C; Holcomb, E E

1987-05-01

An analysis of five anticipated transients without scram (ATWS) was conducted at the Idaho National Engineering Laboratory (INEL). The five detailed deterministic simulations of postulated ATWS sequences were initiated from a main steamline isolation valve (MSIV) closure. The subject of the analysis was the Browns Ferry Nuclear Plant Unit 1, a boiling water reactor (BWR) of the BWR/4 product line with a Mark I containment. The simulations yielded insights to the possible consequences resulting from a MSIV closure ATWS. An evaluation of the effects of plant safety systems and operator actions on accident progression and mitigation is presented.

Evaluation of safety treatments for roadside culverts.

DOT National Transportation Integrated Search

2009-04-24

Roadside cross-drainage culverts have been found to impact vehicle accident injury levels. : Designers have commonly used three safety treatments to protect errant drivers from culvert accidents. : These treatments have included: culvert extension, g...

Controlling factors of the parental safety perception on children's travel mode choice.

PubMed

Nevelsteen, Kristof; Steenberghen, Thérèse; Van Rompaey, Anton; Uyttersprot, Liesbeth

2012-03-01

The travel mode of children changed significantly over the last 20 years, with a decrease of children travelling as pedestrians or cyclists. This study focuses on six to twelve year old children. Parents determine to a large extent the mode choice of children in this age category. Based on the analysis of an extensive survey, the research shows that traffic infrastructure has a significant impact on parental decision making concerning children's travel mode choice, by affecting both the real and the perceived traffic safety. Real traffic safety is quantified in terms of numbers of accidents and road infrastructure. For the perceived traffic safety a parental allowance probability is calculated per road type to show that infrastructure characteristics influence parental decision making on the children's mode choice. A binary logistic model shows that this allowance is determined by age, gender and traffic infrastructure near the child's home or near destinations frequently visited by children. Since both real and perceived traffic safety are influenced by infrastructure characteristics, a spatial analysis of parental perception and accident statistics can be used to indicate the locations where infrastructure improvements will be most effective to increase the number of children travelling - safely - as pedestrians or cyclists. Copyright © 2011 Elsevier Ltd. All rights reserved.

Data Analysis Approaches for the Risk-Informed Safety Margins Characterization Toolkit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Alfonsi, Andrea; Maljovec, Daniel P.

2016-09-01

In the past decades, several numerical simulation codes have been employed to simulate accident dynamics (e.g., RELAP5-3D, RELAP-7, MELCOR, MAAP). In order to evaluate the impact of uncertainties into accident dynamics, several stochastic methodologies have been coupled with these codes. These stochastic methods range from classical Monte-Carlo and Latin Hypercube sampling to stochastic polynomial methods. Similar approaches have been introduced into the risk and safety community where stochastic methods (such as RAVEN, ADAPT, MCDET, ADS) have been coupled with safety analysis codes in order to evaluate the safety impact of timing and sequencing of events. These approaches are usually calledmore » Dynamic PRA or simulation-based PRA methods. These uncertainties and safety methods usually generate a large number of simulation runs (database storage may be on the order of gigabytes or higher). The scope of this paper is to present a broad overview of methods and algorithms that can be used to analyze and extract information from large data sets containing time dependent data. In this context, “extracting information” means constructing input-output correlations, finding commonalities, and identifying outliers. Some of the algorithms presented here have been developed or are under development within the RAVEN statistical framework.« less

The situation of hazardous chemical accidents in China between 2000 and 2006.

PubMed

Duan, Weili; Chen, Guohua; Ye, Qing; Chen, Qingguang

2011-02-28

From the aspects of the total quantity of accidents, regional inequality, enterprises scale and environmental pollution accidents, this study makes an analysis of hazardous chemical accidents in China for the period spanning from 2000 to 2006. The following results are obtained: firstly, there were lots of accidents and fatalities in hazardous chemical business, i.e., the number of casualty accidents fluctuated between 200 and 600/year, the number of fatality fluctuated between 220 and 1100/year. Secondly, the accident rate in developed southeast coastal areas, e.g., Guangdong, Zhejiang and Jiangsu, was far higher than that in the northwest regions, e.g., Xizang, Xinjiang, and Qinghai. Thirdly, nearly 80% of dangerous chemical accidents had occurred in small and medium-sized enterprises (SMEs). Finally, various sudden environmental pollution accidents resulted from hazardous chemicals were frequent in recent years, causing a huge damage to human and property. Then, based on the readjustment of economic structure in the last decades, the development status of Occupational Health and Safety (OHS) in SMEs and other factors, the paper explores the main causes, which offers valuable insight into measures that should be taken to reduce hazardous chemical accidents. Copyright © 2010 Elsevier B.V. All rights reserved.

Light Water Reactor Sustainability Program Reactor Safety Technologies Pathway Technical Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corradini, M. L.; Peko, D.; Farmer, M.

In the aftermath of the March 2011 multi-unit accident at the Fukushima Daiichi nuclear power plant (Fukushima), the nuclear community has been reassessing certain safety assumptions about nuclear reactor plant design, operations and emergency actions, particularly with respect to extreme events that might occur and that are beyond each plant’s current design basis. Because of our significant domestic investment in nuclear reactor technology (99 operating reactors in the fleet of commercial LWRs with five under construction), the United States has been a major leader internationally in these activities. The U.S. nuclear industry is voluntarily pursuing a number of additional safetymore » initiatives. The NRC continues to evaluate and, where deemed appropriate, establish new requirements for ensuring adequate protection of public health and safety in the occurrence of low probability events at nuclear plants; (e.g., mitigation strategies for beyond design basis events initiated by external events like seismic or flooding initiators). The DOE has also played a major role in the U.S. response to the Fukushima accident. Initially, DOE worked with the Japanese and the international community to help develop a more complete understanding of the Fukushima accident progression and its consequences, and to respond to various safety concerns emerging from uncertainties about the nature of and the effects from the accident. DOE R&D activities are focused on providing scientific and technical insights, data, analyses methods that ultimately support industry efforts to enhance safety. These activities are expected to further enhance the safety performance of currently operating U.S. nuclear power plants as well as better characterize the safety performance of future U.S. plants. In pursuing this area of R&D, DOE recognizes that the commercial nuclear industry is ultimately responsible for the safe operation of licensed nuclear facilities. As such, industry is considered the primary “end user” of the results from this DOE-sponsored work. The response to the Fukushima accident has been global, and there is a continuing multinational interest in collaborations to better quantify accident consequences and to incorporate lessons learned from the accident. DOE will continue to seek opportunities to facilitate collaborations that are of value to the U.S. industry, particularly where the collaboration provides access to vital data from the accident or otherwise supports or leverages other important R&D work. The purpose of the Reactor Safety Technology R&D is to improve understanding of beyond design basis events and reduce uncertainty in severe accident progression, phenomenology, and outcomes using existing analytical codes and information gleaned from severe accidents, in particular the Fukushima Daiichi events. This information will be used to aid in developing mitigating strategies and improving severe accident management guidelines for the current light water reactor fleet.« less

Light Water Reactor Sustainability Program: Reactor Safety Technologies Pathway Technical Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corradini, M. L.

In the aftermath of the March 2011 multi-unit accident at the Fukushima Daiichi nuclear power plant (Fukushima), the nuclear community has been reassessing certain safety assumptions about nuclear reactor plant design, operations and emergency actions, particularly with respect to extreme events that might occur and that are beyond each plant’s current design basis. Because of our significant domestic investment in nuclear reactor technology (99 operating reactors in the fleet of commercial LWRs with five under construction), the United States has been a major leader internationally in these activities. The U.S. nuclear industry is voluntarily pursuing a number of additional safetymore » initiatives. The NRC continues to evaluate and, where deemed appropriate, establish new requirements for ensuring adequate protection of public health and safety in the occurrence of low probability events at nuclear plants; (e.g., mitigation strategies for beyond design basis events initiated by external events like seismic or flooding initiators). The DOE has also played a major role in the U.S. response to the Fukushima accident. Initially, DOE worked with the Japanese and the international community to help develop a more complete understanding of the Fukushima accident progression and its consequences, and to respond to various safety concerns emerging from uncertainties about the nature of and the effects from the accident. DOE R&D activities are focused on providing scientific and technical insights, data, analyses methods that ultimately support industry efforts to enhance safety. These activities are expected to further enhance the safety performance of currently operating U.S. nuclear power plants as well as better characterize the safety performance of future U.S. plants. In pursuing this area of R&D, DOE recognizes that the commercial nuclear industry is ultimately responsible for the safe operation of licensed nuclear facilities. As such, industry is considered the primary “end user” of the results from this DOE-sponsored work. The response to the Fukushima accident has been global, and there is a continuing multinational interest in collaborations to better quantify accident consequences and to incorporate lessons learned from the accident. DOE will continue to seek opportunities to facilitate collaborations that are of value to the U.S. industry, particularly where the collaboration provides access to vital data from the accident or otherwise supports or leverages other important R&D work. The purpose of the Reactor Safety Technology R&D is to improve understanding of beyond design basis events and reduce uncertainty in severe accident progression, phenomenology, and outcomes using existing analytical codes and information gleaned from severe accidents, in particular the Fukushima Daiichi events. This information will be used to aid in developing mitigating strategies and improving severe accident management guidelines for the current light water reactor fleet.« less

Relative effectiveness of worker safety and health training methods.

PubMed

Burke, Michael J; Sarpy, Sue Ann; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Salvador, Rommel O; Islam, Gazi

2006-02-01

We sought to determine the relative effectiveness of different methods of worker safety and health training aimed at improving safety knowledge and performance and reducing negative outcomes (accidents, illnesses, and injuries). Ninety-five quasi-experimental studies (n=20991) were included in the analysis. Three types of intervention methods were distinguished on the basis of learners' participation in the training process: least engaging (lecture, pamphlets, videos), moderately engaging (programmed instruction, feedback interventions), and most engaging (training in behavioral modeling, hands-on training). As training methods became more engaging (i.e., requiring trainees' active participation), workers demonstrated greater knowledge acquisition, and reductions were seen in accidents, illnesses, and injuries. All methods of training produced meaningful behavioral performance improvements. Training involving behavioral modeling, a substantial amount of practice, and dialogue is generally more effective than other methods of safety and health training. The present findings challenge the current emphasis on more passive computer-based and distance training methods within the public health workforce.

Relative Effectiveness of Worker Safety and Health Training Methods

PubMed Central

Burke, Michael J.; Sarpy, Sue Ann; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Salvador, Rommel O.; Islam, Gazi

2006-01-01

Objectives. We sought to determine the relative effectiveness of different methods of worker safety and health training aimed at improving safety knowledge and performance and reducing negative outcomes (accidents, illnesses, and injuries). Methods. Ninety-five quasi-experimental studies (n=20991) were included in the analysis. Three types of intervention methods were distinguished on the basis of learners’ participation in the training process: least engaging (lecture, pamphlets, videos), moderately engaging (programmed instruction, feedback interventions), and most engaging (training in behavioral modeling, hands-on training). Results. As training methods became more engaging (i.e., requiring trainees’ active participation), workers demonstrated greater knowledge acquisition, and reductions were seen in accidents, illnesses, and injuries. All methods of training produced meaningful behavioral performance improvements. Conclusions. Training involving behavioral modeling, a substantial amount of practice, and dialogue is generally more effective than other methods of safety and health training. The present findings challenge the current emphasis on more passive computer-based and distance training methods within the public health workforce. PMID:16380566

49 CFR 801.30 - Records from accident investigations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Records from accident investigations. 801.30... TRANSPORTATION SAFETY BOARD PUBLIC AVAILABILITY OF INFORMATION Accident Investigation Records § 801.30 Records from accident investigations. Upon completion of an accident investigation, each NTSB investigator (or...

49 CFR 801.30 - Records from accident investigations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Records from accident investigations. 801.30... TRANSPORTATION SAFETY BOARD PUBLIC AVAILABILITY OF INFORMATION Accident Investigation Records § 801.30 Records from accident investigations. Upon completion of an accident investigation, each NTSB investigator (or...

PROBABILISTIC SAFETY ASSESSMENT OF OPERATIONAL ACCIDENTS AT THE WASTE ISOLATION PILOT PLANT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rucker, D.F.

2000-09-01

This report presents a probabilistic safety assessment of radioactive doses as consequences from accident scenarios to complement the deterministic assessment presented in the Waste Isolation Pilot Plant (WIPP) Safety Analysis Report (SAR). The International Council of Radiation Protection (ICRP) recommends both assessments be conducted to ensure that ''an adequate level of safety has been achieved and that no major contributors to risk are overlooked'' (ICRP 1993). To that end, the probabilistic assessment for the WIPP accident scenarios addresses the wide range of assumptions, e.g. the range of values representing the radioactive source of an accident, that could possibly have beenmore » overlooked by the SAR. Routine releases of radionuclides from the WIPP repository to the environment during the waste emplacement operations are expected to be essentially zero. In contrast, potential accidental releases from postulated accident scenarios during waste handling and emplacement could be substantial, which necessitates the need for radiological air monitoring and confinement barriers (DOE 1999). The WIPP Safety Analysis Report (SAR) calculated doses from accidental releases to the on-site (at 100 m from the source) and off-site (at the Exclusive Use Boundary and Site Boundary) public by a deterministic approach. This approach, as demonstrated in the SAR, uses single-point values of key parameters to assess the 50-year, whole-body committed effective dose equivalent (CEDE). The basic assumptions used in the SAR to formulate the CEDE are retained for this report's probabilistic assessment. However, for the probabilistic assessment, single-point parameter values were replaced with probability density functions (PDF) and were sampled over an expected range. Monte Carlo simulations were run, in which 10,000 iterations were performed by randomly selecting one value for each parameter and calculating the dose. Statistical information was then derived from the 10,000 iteration batch, which included 5%, 50%, and 95% dose likelihood, and the sensitivity of each assumption to the calculated doses. As one would intuitively expect, the doses from the probabilistic assessment for most scenarios were found to be much less than the deterministic assessment. The lower dose of the probabilistic assessment can be attributed to a ''smearing'' of values from the high and low end of the PDF spectrum of the various input parameters. The analysis also found a potential weakness in the deterministic analysis used in the SAR, a detail on drum loading was not taken into consideration. Waste emplacement operations thus far have handled drums from each shipment as a single unit, i.e. drums from each shipment are kept together. Shipments typically come from a single waste stream, and therefore the curie loading of each drum can be considered nearly identical to that of its neighbor. Calculations show that if there are large numbers of drums used in the accident scenario assessment, e.g. 28 drums in the waste hoist failure scenario (CH5), then the probabilistic dose assessment calculations will diverge from the deterministically determined doses. As it is currently calculated, the deterministic dose assessment assumes one drum loaded to the maximum allowable (80 PE-Ci), and the remaining are 10% of the maximum. The effective average of drum curie content is therefore less in the deterministic assessment than the probabilistic assessment for a large number of drums. EEG recommends that the WIPP SAR calculations be revisited and updated to include a probabilistic safety assessment.« less

A Method for Evaluating the Safety Impacts of Air Traffic Automation

NASA Technical Reports Server (NTRS)

Kostiuk, Peter; Shapiro, Gerald; Hanson, Dave; Kolitz, Stephan; Leong, Frank; Rosch, Gene; Bonesteel, Charles

1998-01-01

This report describes a methodology for analyzing the safety and operational impacts of emerging air traffic technologies. The approach integrates traditional reliability models of the system infrastructure with models that analyze the environment within which the system operates, and models of how the system responds to different scenarios. Products of the analysis include safety measures such as predicted incident rates, predicted accident statistics, and false alarm rates; and operational availability data. The report demonstrates the methodology with an analysis of the operation of the Center-TRACON Automation System at Dallas-Fort Worth International Airport.

Understanding factors associated with misclassification of fatigue-related accidents in police record.

PubMed

Li, Yanyan; Yamamoto, Toshiyuki; Zhang, Guangnan

2018-02-01

Fatigue is one of the riskiest causes of traffic accidents threatening road safety. Due to lack of proper criteria, the identification of fatigue-related accidents by police officers largely depends on inferential evidence and their own experience. As a result, many fatigue-related accidents are misclassified and the harmfulness of fatigue on road safety is misestimated. In this paper, a joint model framework is introduced to analyze factors contributing to misclassification of a fatigue-related accident in police reports. Association rule data mining technique is employed to identify the potential interactions of factors, and logistic regression models are applied to analyze factors that hinder police officers' identification of fatigue-related accidents. Using the fatigue-related crash records from Guangdong Province during 2005-2014, factors contributing to the false positive and false negative detection of the fatigue-related accident have been identified and compared. Some variables and interactions were identified to have significant impacts on fatigue-related accident detection. Based on the results, it can be inferred that the stereotype of certain groups of drivers, crash types, and roadway conditions affects police officers' judgment on fatigue-related accidents. This finding can provide useful information for training police officers and build better criteria for fatigue identification. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Risk of Occupational Accidents in Workers with Obstructive Sleep Apnea: Systematic Review and Meta-analysis

PubMed Central

Garbarino, Sergio; Guglielmi, Ottavia; Sanna, Antonio; Mancardi, Gian Luigi; Magnavita, Nicola

2016-01-01

Study Objectives: Obstructive sleep apnea (OSA) is the single most important preventable medical cause of excessive daytime sleepiness (EDS) and driving accidents. OSA may also adversely affect work performance through a decrease in productivity, and an increase in the injury rate. Nevertheless, no systematic review and meta-analysis of the relationship between OSA and work accidents has been performed thus far. Methods: PubMed, PsycInfo, Scopus, Web of Science, and Cochrane Library were searched. Out of an initial list of 1,099 papers, 10 studies (12,553 participants) were eligible for our review, and 7 of them were included in the meta-analysis. The overall effects were measured by odds ratios (OR) and 95% confidence intervals (CI). An assessment was made of the methodological quality of the studies. Moderator analysis and funnel plot analysis were used to explore the sources of between-study heterogeneity. Results: Compared to controls, the odds of work accident was found to be nearly double in workers with OSA (OR = 2.18; 95% CI = 1.53–3.10). Occupational driving was associated with a higher effect size. Conclusions: OSA is an underdiagnosed nonoccupational disease that has a strong adverse effect on work accidents. The nearly twofold increased odds of work accidents in subjects with OSA calls for workplace screening in selected safety-sensitive occupations. Commentary: A commentary on this article appears in this issue on page 1171. Citation: Garbarino S, Guglielmi O, Sanna A, Mancardi GL, Magnavita N. Risk of occupational accidents in workers with obstructive sleep apnea: systematic review and meta-analysis. SLEEP 2016;39(6):1211–1218. PMID:26951401

Rail Safety/Equipment Crashworthiness : Volume 4. Executive Summary.

DOT National Transportation Integrated Search

1978-07-01

The document, the fourth of four volumes, summarizes the activities and documentation conducted under this contract. The analysis of the accident data highlighted areas where improvements could be made to improve the occupant protection of passenger ...

NUCLEAR NONPROLIFERATION AND SAFETY: Challenges Facing the International Atomic Energy Agency.

DTIC Science & Technology

1993-09-01

safeguards), and the Chernobyl nuclear power plant accident have focused greater attention on nuclear proliferation and the safety of nuclear power... Chernobyl , IAEA has placed increasing emphasis on assisting member states in improving the safety of nuclear power plants. Despite funding shortfalls...report language, GAO has incorporated their comments where appropriate. 2Nuclear Power Safety: Chernobyl Accident Prompted Worldwide Actions but

U.S. Civil Rotorcraft Accidents, 1963 Through 1997

NASA Technical Reports Server (NTRS)

Harris, Franklin D.; Kasper, Eugene F.; Iseler, Laura E.

2000-01-01

Narrative summary data produced by the U.S. National Transportation Safety Board (NTSB) has been obtained and analyzed for all 8,436 U.S. civil registered rotorcraft accidents which occurred from mid-1963 through 1997. This analysis was based on the NTSB's assignment of each mishap into one of 21 "first event" categories. The number of U.S. civil registered rotorcraft as recorded by the Federal Aviation Administration (FAA) for the same period has also been obtained. Taken together, these data indicate the civil rotorcraft accident rate (on a per 1,000 registered rotorcraft basis) has decreased by almost a factor of 10 (i.e., from 130 accidents per 1,000 rotorcraft in 1964 to 13.4 per 1,000 in 1997). Analysis of the mishap data indicates over 70% of the rotorcraft accidents were associated with one of the following four NTSB "first event" categories: 2408 Loss of engine power (28.5%); 1,322 In-flight collisions with objects (15.7%); 1,114 Loss of control (13.2%); 1,083 Airframe/component/system failure or malfunction (12.8%).

Sports Safety. Accident Prevention and Injury Control in Physical Education, Athletics, and Recreation.

ERIC Educational Resources Information Center

Yost, Charles Peter, Ed.

This anthology of articles concerned with injury in sports and safety procedures is divided into three parts. Part One is devoted to general discussions of safety and a guiding philosophy for accident prevention. Part Two develops articles on administration and supervision, including discussions of health examination, legal liability, facilities,…

Investigating Accidents in the Workplace. A Manual for Compliance Safety and Health Officers.

ERIC Educational Resources Information Center

Occupational Safety and Health Administration, Washington, DC.

This manual was developed for Compliance Safety and Health Officers (CSHO) of the Occupational Safety and Health Administration (OSHA) to help them carry out their responsibilities when investigating workplace accidents. The content is presented in four sections. The first overviews the investigative roles of CSHO officers, including…

Highway Safety Program Manual: Volume 9: Identification and Surveillance of Accident Locations.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 9 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on identification and surveillance of accident locations. The purpose of the program, its specific objectives, and its relationship with other programs are explored. Federal authority in the…

Project safety as a sustainable competitive advantage.

PubMed

Rechenthin, David

2004-01-01

To be consistently profitable, a construction company must complete projects in scope, on schedule, and on budget. At the same time, the nature of the often high-risk work performed by construction companies can result in high accident rates. Clients and other stakeholders are placing increasing pressure on companies to decrease those accident rates. Clients routinely demand copies of safety plans and evidence of past results at the "pre-qualification" or "request for proposal" stages of the procurement process. Are high accident rates and the associated costs just a part of business? Companies that deliver on scope, schedule, and budget have a competitive advantage. Is it possible for projects with low accident rates to use it as a competitive advantage? Is the value added by safety just a temporary or parity issue, or does a successful safety program offer significant advantage to the company and the client? This article concludes that in the case of a high-risk industry, such as the construction industry, an organization with a successful safety program can promote safety performance as a sustainable competitive advantage. It is a choice the company can make.

Aviation Trends Related to Atmospheric Environment Safety Technologies Project Technical Challenges

NASA Technical Reports Server (NTRS)

Reveley, Mary S.; Withrow, Colleen A.; Barr, Lawrence C.; Evans, Joni K.; Leone, Karen M.; Jones, Sharon M.

2014-01-01

Current and future aviation safety trends related to the National Aeronautics and Space Administration's Atmospheric Environment Safety Technologies Project's three technical challenges (engine icing characterization and simulation capability; airframe icing simulation and engineering tool capability; and atmospheric hazard sensing and mitigation technology capability) were assessed by examining the National Transportation Safety Board (NTSB) accident database (1989 to 2008), incidents from the Federal Aviation Administration (FAA) accident/incident database (1989 to 2006), and literature from various industry and government sources. The accident and incident data were examined for events involving fixed-wing airplanes operating under Federal Aviation Regulation (FAR) Parts 121, 135, and 91 for atmospheric conditions related to airframe icing, ice-crystal engine icing, turbulence, clear air turbulence, wake vortex, lightning, and low visibility (fog, low ceiling, clouds, precipitation, and low lighting). Five future aviation safety risk areas associated with the three AEST technical challenges were identified after an exhaustive survey of a variety of sources and include: approach and landing accident reduction, icing/ice detection, loss of control in flight, super density operations, and runway safety.

Job strain in public transport drivers: Data to assess the relationship between demand-control model indicators, traffic accidents and sanctions.

PubMed

Useche, Sergio; Montoro, Luis; Cendales, Boris; Gómez, Viviola

2018-08-01

This Data in Brief (DiB) article examines the association between the Job Demand-Control (JDC) model of stress and traffic safety outcomes (accidents and sanctions) in public transport drivers ( n = 780). The data was collected using a structured self-administrable questionnaire composed of measurements of work stress (Job Content Questionnaire), and demographics (professional driving experience, hours and days working/driving per week). The data contains 4 parts: descriptive statistics, bivariate correlations between the study variables, analysis of variance (ANOVA) and Post-Hoc comparisons between drivers classified different quadrants of the JDC model. For further information, it is convenient to read the full article entitled " Working conditions, job strain and traffic safety among three groups of public transport drivers ", published in Safety and Health at Work (SHAW) [1] (Useche et al., 2018).

How shall we design the future vehicle for Chinese market.

PubMed

Chen, Fang; Wang, Minjuan; Zhu, Xi Chan; Li, Jiaqi

2012-01-01

Surface transportation system is developing very fast in China and the number of vehicles is increasing quickly as well. This development creates a lot of problems on traffic safety and the number of accident is also increasing. In this paper, we made deep analysis of different possible causes of safety problems through three aspects: the traffic environment and infrastructure, in-vehicle information system design and the characteristics of drivers. There are many factors in each aspects may contribute to the transportation safety problems. Problems with infrastructure design and traffic design contribute over 50% of the traffic accident. Another important factor is that people has very little traffic safety concept and very weak on understanding the important of right behavior on the road. This paper has pointed the urgent needs to study the human factors in road and transportation system and vehicle HMI design, as there are very few such studies available in literature based on Chinese situation. The paper also proposed the needs to develop proactive educational system that can promote driver's understanding of traffic safety and to take the right action during drive.

[The forensic medical evaluation of the injuries inflicted inside the passenger compartment of a moving car equipped with the modern personal safety systems].

PubMed

Pigolkin, Yu I; Dubrovin, I A; Mosoyan, A S; Bychkov, A A

The objective of the present study was to elucidate the characteristic features of the injuries inflicted to the victims of a road traffic accident inside the passenger compartment of a moving car equipped with the modern personal safety systems. The materials available for the present work included the lesions documented in 210 drivers and 150 occupants of the car passenger compartments. Both comparative, morphometric and statistical methods were used to analyze the data obtained. The morphometric analysis included identification of the form of the injury, such as extravasation, wounds, fractures, and lesions of the internal organs (e.g. hemorrhages, ruptures, etc.), their number and localization. Special attention was given to the specific features of the injuries to the occupants of the cars equipped with the modern personal safety systems. The study has demonstrated that the form, frequency, and localization of the injuries inflicted to the victims of a road traffic accident inside the passenger car compartment (including the drivers and other occupants) can be used for determining the positions of the victims at the moment of the accident.

Radioactive dispersion analysis for hypothetical nuclear power plant (NPP) candidate site in Perak state, Malaysia

NASA Astrophysics Data System (ADS)

Shamsuddin, Shazmeen Daniar; Basri, Nor Afifah; Omar, Nurlyana; Koh, Meng-Hock; Ramli, Ahmad Termizi; Saridan Wan Hassan, Wan Muhamad

2017-10-01

Malaysia is planning to build a nuclear power plant (NPP) by 2030 to diversify the national electricity supply and resources. Selection of an NPP site must consider various factors, especially nuclear safety consideration to fulfil the nuclear safety objectives. Environmental Risk Assessment Analysis is a part of safety requirements by the International Atomic Energy Agency (IAEA) prior to the NPP commissioning process. Risk Assessments Analysis (RIA) is compulsory for the NPP site evaluation. One of RIA methods are Radioactive Dispersion Analysis using probabilistic risk analysis software. It is also important to perform studies to estimate the impact to the neighbouring population in the case of a nuclear accident at the power plant. In the present work, aimed to study the impact of a hypothetical nuclear accident by simulating the dispersion pattern of radionuclides originated from a candidate site at Manjung, Perak. The work has been performed using the HotSpot Health Physics codes. Two types of radionuclides have been considered namely 137Cs and 131I. In calculations, the initial concentration of radioactive materials of Fukushima Daiichi accident data are used which are 2.06 x 1016 Bq and 1.68 x 1017 Bq respectively for the two radionuclides. The result shows that the dispersion distance obtained from both software are not the same. It shows that 137Cs and 131I can be dispersed as far as 16 km and 80 km away from the site during radiological accident respectively, reaching major towns in Perak. Using HOTSPOT, the estimated total effective dose equivalent (TEDE) for 137Cs and 131I at major towns in Perak such as Lumut and Sitiawan are 1.2 mSv and 9.9 mSv. As for Taiping, Ipoh, Kampar, and Teluk Intan the estimated TEDE is around 0.2 mSv and 1.6 mSv respectively. In conclusion, the dispersion can reach as far as 80 km from the site. However, estimated annual effective dose is not more than 1 mSv limit, which is considered acceptable in the point of view of radiological health risk for human and the environment.

National and regional analysis of road accidents in Spain.

PubMed

Tolón-Becerra, A; Lastra-Bravo, X; Flores-Parra, I

2013-01-01

In Spain, the absolute fatality figures decreased almost 50 percent between 1998 and 2009. Despite this great effort, road mortality is still of great concern to political authorities. Further progress requires efficient road safety policy based on an optimal set of measures and targets that consider the initial conditions and characteristics in each region. This study attempts to analyze road accidents in Spain and its provinces in time and space during 1998-2009. First, we analyzed daily, monthly, and nationwide (NUTS 0) development of road accidents, the correlation between logarithmic transformations of road accidents and territorial and socioeconomic variables, the causality by simple linear regression of road accidents and territorial and socioeconomic variables, and preliminary frequency by fast Fourier transform. Then we analyzed the annual trend in accidents in the Spanish provinces (NUTS 3) and found a correlation between the logarithmic transformations of the mortality rate, fatalities per fatal accident, and accidents resulting in injuries per inhabitant variables and population, population density, gross domestic product (GDP), length of road network, and area. Finally, causality was analyzed by simple linear regression. The most outstanding results were the negative correlation between mortality rate and population density in Spanish provinces, which has increased over time, and that road accidents in Spain have an approximate periodicity of 57 days. The fast Fourier transform analysis of road accident frequency in Spain was useful in identifying the periodic, harmonic components of accidents and casualties. The periodicity observed both for the period 1998-2009 and by year showed that the highest intensity in road accidents was bimonthly, despite the lower number of accidents and casualties in the spectra of amplitude and power and efforts to reduce the intensity and concentration during off-season travel (summer and December).

Safety practices in Jordanian manufacturing enterprises within industrial estates.

PubMed

Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

2013-01-01

This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

Whistleblowers: an essential resource for the sustainable prevention of risks in sociotechnical systems.

PubMed

Benchekroun, Tahar Hakim; Pierlot, Sandrine

2012-01-01

Our world of industry and technology has, over the years, has seen undeniable successes in terms of safety and reliability. But major catastrophes and dramatic accidents continue, even today, to cause major human and material losses and to threaten the environment with pollution on a massive scale. Could these disasters and these accidents have been foreseen and avoided? Would it have been possible to anticipate their occurrence by detecting signals of potential hazards? It is unsettling to notice, through retrospective analysis of such events, that warnings had been issued long before the catastrophe or accident took place. This raises several questions, which we will attempt to address in this paper. Why are whistleblowers often not listened to, threatened, or simply ignored? Why are their warnings viewed as "bad omens" instead of essential resources to ensure safety? Do whistleblowers stand idly by, or do they implement individual and collective strategies to make themselves heard? Which managerial and organizational conditions are conducive to developing empowerment in whistleblowers? Based on four case studies, we attempt to address these questions, and offer a first level of analysis and explanation by proposing and defining two new concepts: operative resilience and strategic resilience.

Association Between Vestibular Vertigo and Motor Vehicle Accidents: Data From the 2016 National Health Interview Survey.

PubMed

Wei, Eric X; Agrawal, Yuri

2018-05-18

Recent evidence has shown that individuals with vestibular impairment have higher rates of self-reported driving difficulty compared with individuals without vestibular impairment. However, it is unknown whether individuals with vestibular impairment are more likely to be involved in motor vehicle accidents. We used data from the 2016 National Health Interview Survey of U.S. adults to evaluate whether individuals with vestibular vertigo are more likely to experience motor vehicle accidents relative to individuals without vestibular vertigo. In multivariate analysis, vestibular vertigo was associated with an over threefold increased odds of motor vehicle accidents (odds ratio, 3.5; 95% confidence interval, 1.7-7.3). This study supports an assciation between vestibular dysfunction and driving impairment, and provides a relative risk of motor vehicle accidents associated with vestibular vertigo that clinicians may utilize in counseling patients on the potential safety hazards of driving.

Geographic analysis of road accident severity index in Nigeria.

PubMed

Iyanda, Ayodeji E

2018-05-28

Before 2030, deaths from road traffic accidents (RTAs) will surpass cerebrovascular disease, tuberculosis, and HIV/AIDS. Yet, there is little knowledge on the geographic distribution of RTA severity in Nigeria. Accident Severity Index is the proportion of deaths that result from a road accident. This study analysed the geographic pattern of RTA severity based on the data retrieved from Federal Road Safety Corps (FRSC). The study predicted a two-year data from a historic road accident data using exponential smoothing technique. To determine spatial autocorrelation, global and local indicators of spatial association were implemented in a geographic information system. Results show significant clusters of high RTA severity among states in the northeast and the northwest of Nigeria. Hence, the findings are discussed from two perspectives: Road traffic law compliance and poor emergency response. Conclusion, the severity of RTA is high in the northern states of Nigeria, hence, RTA remains a public health concern.

Examining accident reports involving autonomous vehicles in California.

PubMed

Favarò, Francesca M; Nader, Nazanin; Eurich, Sky O; Tripp, Michelle; Varadaraju, Naresh

2017-01-01

Autonomous Vehicle technology is quickly expanding its market and has found in Silicon Valley, California, a strong foothold for preliminary testing on public roads. In an effort to promote safety and transparency to consumers, the California Department of Motor Vehicles has mandated that reports of accidents involving autonomous vehicles be drafted and made available to the public. The present work shows an in-depth analysis of the accident reports filed by different manufacturers that are testing autonomous vehicles in California (testing data from September 2014 to March 2017). The data provides important information on autonomous vehicles accidents' dynamics, related to the most frequent types of collisions and impacts, accident frequencies, and other contributing factors. The study also explores important implications related to future testing and validation of semi-autonomous vehicles, tracing the investigation back to current literature as well as to the current regulatory panorama.

Analysis of the causes and consequences of falls from scaffolding using the Polish construction industry as an example

NASA Astrophysics Data System (ADS)

Hoła, A.; Hoła, B.; Szóstak, M.

2017-10-01

The results of research published in many publications indicate that the scale of the problem of accidents at work in the construction industry is significant. Fatal and serious accidents, which in the construction industry are often a result of a fall from a height and associated with working on scaffolding, have a particularly strong impact on society. Systematic controls carried out on Polish construction sites indicate irregularities in the area of ensuring safety on scaffolding. As a result of conducted own studies, dozens of accidents caused by falls from scaffolding were selected from the total number of accidents at work in the construction industry and then analysed. The aim of the research was to identify the causes of these accidents and their consequences. The results of studies conducted in this area will be the content of the article.

Comprehensive analysis of single- and multi-vehicle large truck at-fault crashes on rural and urban roadways in Alabama.

PubMed

Islam, Samantha; Jones, Steven L; Dye, Daniel

2014-06-01

The research described in this paper analyzed injury severities at a disaggregate level for single-vehicle (SV) and multi-vehicle (MV) large truck at-fault accidents for rural and urban locations in Alabama. Given the occurrence of a crash, four separate random parameter logit models of injury severity (with possible outcomes of major, minor, and possible or no injury) were estimated. The models identified different sets of factors that can lead to effective policy decisions aimed at reducing large truck-at-fault accidents for respective locations. The results of the study clearly indicated that there are differences between the influences of a variety of variables on the injury severities resulting from urban vs. rural SV and MV large truck at-fault accidents. The results showed that some variables were significant only in one type of accident model (SV or MV) but not in the other accident model. Again, some variables were found to be significant in one location (rural or urban) but not in other locations. The study also identified important factors that significantly impact the injury severity resulting from SV and MV large truck at-fault accidents in urban and rural locations based on the estimated values of average direct pseudo-elasticity. A careful study of the results of this study will help policy makers and transportation agencies identify location specific recommendations to increase safety awareness related to large truck involved accidents and to improve overall highway safety. Copyright © 2014 Elsevier Ltd. All rights reserved.

The influence of economic incentives linked to road safety indicators on accidents: the case of toll concessions in Spain.

PubMed

Rangel, Thais; Vassallo, José Manuel; Herraiz, Israel

2013-10-01

The goal of this paper is to evaluate whether the incentives incorporated in toll highway concession contracts in order to encourage private operators to adopt measures to reduce accidents are actually effective at improving safety. To this end, we implemented negative binomial regression models using information about highway characteristics and accident data from toll highway concessions in Spain from 2007 to 2009. Our results show that even though road safety is highly influenced by variables that are not managed by the contractor, such as the annual average daily traffic (AADT), the percentage of heavy vehicles on the highway, number of lanes, number of intersections and average speed; the implementation of these incentives has a positive influence on the reduction of accidents and injuries. Consequently, this measure seems to be an effective way of improving safety performance in road networks. Copyright © 2013 Elsevier Ltd. All rights reserved.

Employee direct participation in organisational decisions and workplace safety.

PubMed

Widerszal-Bazyl, Maria; Warszewska-Makuch, Magdalena

2008-01-01

Managers from 192 companies filled out the Employee Direct Participation in Organisational Change questionnaire measuring employees' direct participation (DP) in organisational decisions. Four main forms of DP were identified: individual and group consultations, and individual and group delegation. Workplace safety was measured with the number of accidents, the number of employees working in hazardous conditions, accident absenteeism and sickness absence. Results showed that the 2 latter indicators were significantly related to some parameters of DP. Thus, companies that used face-to-face individual consultation had lower accident absenteeism than ones that did not. The same effect was true for group consultation with temporary groups, and individual and group delegation. Workplaces with high scores for scope for group consultation had lower accident absenteeism, and those with high scores for scope for group delegation had lower sickness absence. It was concluded that employee DP had a positive influence on workplace safety, even if involvement was not directly related to safety.

Pilots of the future - Human or computer?

NASA Technical Reports Server (NTRS)

Chambers, A. B.; Nagel, D. C.

1985-01-01

In connection with the occurrence of aircraft accidents and the evolution of the air-travel system, questions arise regarding the computer's potential for making fundamental contributions to improving the safety and reliability of air travel. An important result of an analysis of the causes of aircraft accidents is the conclusion that humans - 'pilots and other personnel' - are implicated in well over half of the accidents which occur. Over 70 percent of the incident reports contain evidence of human error. In addition, almost 75 percent show evidence of an 'information-transfer' problem. Thus, the question arises whether improvements in air safety could be achieved by removing humans from control situations. In an attempt to answer this question, it is important to take into account also certain advantages which humans have in comparison to computers. Attention is given to human error and the effects of technology, the motivation to automate, aircraft automation at the crossroads, the evolution of cockpit automation, and pilot factors.

An Examination of Commercial Aviation Accidents and Incidents Related to Integrated Vehicle Health Management

NASA Technical Reports Server (NTRS)

Reveley, Mary S.; Briggs, Jeffrey L.; Thomas, Megan A.; Evans, Joni K.; Jones, Sharon M.

2011-01-01

The Integrated Vehicle Health Management (IVHM) Project is one of the four projects within the National Aeronautics and Space Administration's (NASA) Aviation Safety Program (AvSafe). The IVHM Project conducts research to develop validated tools and technologies for automated detection, diagnosis, and prognosis that enable mitigation of adverse events during flight. Adverse events include those that arise from system, subsystem, or component failure, faults, and malfunctions due to damage, degradation, or environmental hazards that occur during flight. Determining the causal factors and adverse events related to IVHM technologies will help in the formulation of research requirements and establish a list of example adverse conditions against which IVHM technologies can be evaluated. This paper documents the results of an examination of the most recent statistical/prognostic accident and incident data that is available from the Aviation Safety Information Analysis and Sharing (ASIAS) System to determine the causal factors of system/component failures and/or malfunctions in U.S. commercial aviation accidents and incidents.

Correlation of causal factors that influence construction safety performance: A model.

PubMed

Rodrigues, F; Coutinho, A; Cardoso, C

2015-01-01

The construction sector has presented positive development regarding the decrease in occupational accident rates in recent years. Regardless, the construction sector stands out systematically from other industries due to its high number of fatalities. The aim of this paper is to deeply understand the causality of construction accidents from the early design phase through a model. This study reviewed several research papers presenting various analytical models that correlate the contributing factors to occupational accidents in this sector. This study also analysed different construction projects and conducted a survey of design and site supervision teams. This paper proposes a model developed from the analysis of existing ones, which correlates the causal factors through all the construction phases. It was concluded that effective risk prevention can only be achieved by a global correlation of causal factors including not only production ones but also client requirements, financial climate, design team competence, project and risk management, financial capacity, health and safety policy and early planning. Accordingly, a model is proposed.

Study of aircraft crashworthiness for fire protection

NASA Technical Reports Server (NTRS)

Cominsky, A.

1981-01-01

Impact-survivable postcrash fire accidents were surveyed. The data base developed includes foreign and domestic accidents involving airlines and jet aircraft. The emphasis was placed on domestic accidents, airlines, and jet aircraft due principally to availability of information. Only transport category aircraft in commercial service designed under FAR Part 25 were considered. A matrix was prepared to show the relationships between the accident characteristics and the fire fatalities. Typical postcrash fire scenaries were identified. Safety concepts were developed for three engineering categories: cabin interiors - cabin subsystems; power plant - engines and fuel systems; and structural mechanics - primary and secondary structures. The parameters identified for concept evaluation are cost, effectiveness, and societal concerns. Three concepts were selected for design definition and cost and effectiveness analysis: improved fire-resistant seat materials; anti-misting kerosene; and additional cabin emergency exits.

Major accident prevention through applying safety knowledge management approach.

PubMed

Kalatpour, Omid

2016-01-01

Many scattered resources of knowledge are available to use for chemical accident prevention purposes. The common approach to management process safety, including using databases and referring to the available knowledge has some drawbacks. The main goal of this article was to devise a new emerged knowledge base (KB) for the chemical accident prevention domain. The scattered sources of safety knowledge were identified and scanned. Then, the collected knowledge was formalized through a computerized program. The Protégé software was used to formalize and represent the stored safety knowledge. The domain knowledge retrieved as well as data and information. This optimized approach improved safety and health knowledge management (KM) process and resolved some typical problems in the KM process. Upgrading the traditional resources of safety databases into the KBs can improve the interaction between the users and knowledge repository.

Jerky driving--An indicator of accident proneness?

PubMed

Bagdadi, Omar; Várhelyi, András

2011-07-01

This study uses continuously logged driving data from 166 private cars to derive the level of jerks caused by the drivers during everyday driving. The number of critical jerks found in the data is analysed and compared with the self-reported accident involvement of the drivers. The results show that the expected number of accidents for a driver increases with the number of critical jerks caused by the driver. Jerk analyses make it possible to identify safety critical driving behaviour or "accident prone" drivers. They also facilitate the development of safety measures such as active safety systems or advanced driver assistance systems, ADAS, which could be adapted for specific groups of drivers or specific risky driving behaviour. Copyright © 2011 Elsevier Ltd. All rights reserved.

Bicycle safety highway users information report

DOT National Transportation Integrated Search

1978-01-01

This report presents a picture of the type and frequency of bicycling accidents common to adult bicyclists using America's streets and highways. It develops accident frequencies by type, offers profiles of accident versus non-accident riders, lists p...

Overview of Energy Systems' safety analysis report programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility's safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This Overview of Energy Systems Safety Analysis Report Programs'' Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

Software Safety Analysis of a Flight Guidance System

NASA Technical Reports Server (NTRS)

Butler, Ricky W. (Technical Monitor); Tribble, Alan C.; Miller, Steven P.; Lempia, David L.

2004-01-01

This document summarizes the safety analysis performed on a Flight Guidance System (FGS) requirements model. In particular, the safety properties desired of the FGS model are identified and the presence of the safety properties in the model is formally verified. Chapter 1 provides an introduction to the entire project, while Chapter 2 gives a brief overview of the problem domain, the nature of accidents, model based development, and the four-variable model. Chapter 3 outlines the approach. Chapter 4 presents the results of the traditional safety analysis techniques and illustrates how the hazardous conditions associated with the system trace into specific safety properties. Chapter 5 presents the results of the formal methods analysis technique model checking that was used to verify the presence of the safety properties in the requirements model. Finally, Chapter 6 summarizes the main conclusions of the study, first and foremost that model checking is a very effective verification technique to use on discrete models with reasonable state spaces. Additional supporting details are provided in the appendices.

Final safety analysis report for the Galileo Mission: Volume 2: Book 1, Accident model document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Accident Model Document (AMD) is the second volume of the three volume Final Safety Analysis Report (FSAR) for the Galileo outer planetary space science mission. This mission employs Radioisotope Thermoelectric Generators (RTGs) as the prime electrical power sources for the spacecraft. Galileo will be launched into Earth orbit using the Space Shuttle and will use the Inertial Upper Stage (IUS) booster to place the spacecraft into an Earth escape trajectory. The RTG's employ silicon-germanium thermoelectric couples to produce electricity from the heat energy that results from the decay of the radioisotope fuel, Plutonium-238, used in the RTG heat source.more » The heat source configuration used in the RTG's is termed General Purpose Heat Source (GPHS), and the RTG's are designated GPHS-RTGs. The use of radioactive material in these missions necessitates evaluations of the radiological risks that may be encountered by launch complex personnel as well as by the Earth's general population resulting from postulated malfunctions or failures occurring in the mission operations. The FSAR presents the results of a rigorous safety assessment, including substantial analyses and testing, of the launch and deployment of the RTGs for the Galileo mission. This AMD is a summary of the potential accident and failure sequences which might result in fuel release, the analysis and testing methods employed, and the predicted source terms. Each source term consists of a quantity of fuel released, the location of release and the physical characteristics of the fuel released. Each source term has an associated probability of occurrence. 27 figs., 11 tabs.« less

Effect of the Road Environment on Road Safety in Poland

NASA Astrophysics Data System (ADS)

Budzynski, Marcin; Jamroz, Kazimierz; Antoniuk, Marcin

2017-10-01

Run-off-road accidents tend to be very severe because when a vehicle leaves the road, it will often crash into a solid obstacle (tree, pole, supports, front wall of a culvert, barrier). A statistical analysis of the data shows that Poland’s main roadside hazard is trees and the severity of vehicles striking a tree in a run-off-road crash. The risks are particularly high in north-west Poland with many of the roads lined up with trees. Because of the existing rural road cross-sections, i.e. having trees directly on road edge followed immediately by drainage ditches, vulnerable road users are prevented from using shoulders and made to use the roadway. With no legal definition of the road safety zone in Polish regulations, attempts to remove roadside trees lead to major conflicts with environmental stakeholders. This is why a compromise should be sought between the safety of road users and protection of the natural environment and the aesthetics of the road experience. Rather than just cut the trees, other road safety measures should be used where possible to treat the hazardous spots by securing trees and obstacles and through speed management. Accidents that are directly related to the road environment fall into the following categories: hitting a tree, hitting a barrier, hitting a utility pole or sign, vehicle rollover on the shoulder, vehicle rollover on slopes or in ditch. The main consequence of a roadside hazard is not the likelihood of an accident itself but of its severity. Poland’s roadside accident severity is primarily the result of poor design or operation of road infrastructure. This comes as a consequence of a lack of regulations or poorly defined regulations and failure to comply with road safety standards. The new analytical model was designed as a combination of the different factors and one that will serve as a comprehensive model. It was assumed that it will describe the effect of the roadside on the number of accidents and their consequences. The design of the model was based on recommendations from analysing other models. The assumptions were the following: the model will be used to calculate risk factors and accident severity, the indicators will depend on number of vehicle kilometres travelled or traffic volumes, analyses will be based on accident data: striking a tree, hitting a barrier, hitting a utility pole or sign. Additional data will include roadside information and casualty density measures will be used - killed and injured.

Method for Assessing Risk of Road Accidents in Transportation of School Children

NASA Astrophysics Data System (ADS)

Pogotovkina, N. S.; Volodkin, P. P.; Demakhina, E. S.

2017-11-01

The rationale behind the problem being investigated is explained by the remaining high level of the accident rates with the participation of vehicles carrying groups of children, including school buses, in the Russian Federation over the period of several years. The article is aimed at the identification of new approaches to improve the safety of transportation of schoolchildren in accordance with the Concept of children transportation by buses and the plan for its implementation. The leading approach to solve the problem under consideration is the prediction of accidents in the schoolchildren transportation. The article presents the results of the accident rate analysis with the participation of school buses in the Russian Federation for five years. Besides, a system to monitor the transportation of schoolchildren is proposed; the system will allow analyzing and forecasting traffic accidents which involve buses carrying groups of children, including school buses. In addition, the article presents a methodology for assessing the risk of road accidents during the transportation of schoolchildren.

Comparison of a Traditional Probabilistic Risk Assessment Approach with Advanced Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis L; Mandelli, Diego; Zhegang Ma

2014-11-01

As part of the Light Water Sustainability Program (LWRS) [1], the purpose of the Risk Informed Safety Margin Characterization (RISMC) [2] Pathway research and development (R&D) is to support plant decisions for risk-informed margin management with the aim to improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” (SBO) wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe themore » RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario. We also describe our approach we are using to represent advanced flooding analysis.« less

Safety leadership at construction sites: the importance of rule-oriented and participative leadership.

PubMed

Grill, Martin; Pousette, Anders; Nielsen, Kent; Grytnes, Regine; Törner, Marianne

2017-07-01

Objectives The construction industry accounted for >20% of all fatal occupational accidents in Europe in 2014. Leadership is an essential antecedent to occupational safety. The aim of the present study was to assess the influence of transformational, active transactional, rule-oriented, participative, and laissez-faire leadership on safety climate, safety behavior, and accidents in the Swedish and Danish construction industry. Sweden and Denmark are similar countries but have a large difference in occupational accidents rates. Methods A questionnaire study was conducted among a random sample of construction workers in both countries: 811 construction workers from 85 sites responded, resulting in site and individual response rates of 73% and 64%, respectively. Results The results indicated that transformational, active transactional, rule-oriented and participative leadership predict positive safety outcomes, and laissez-faire leadership predict negative safety outcomes. For example, rule-oriented leadership predicts a superior safety climate (β=0.40, P<0.001), enhanced safety behavior (β=0.15, P<0.001), and fewer accidents [odds ratio (OR) 0.78, 95% confidence interval (95% CI) 0.62-0.98]. The effect of rule-oriented leadership on workers' safety behavior was moderated by the level of participative leadership (β=0.10, P<0.001), suggesting that when rules and plans are established in a collaborative manner, workers' motivation to comply with safety regulations and participate in proactive safety activities is elevated. The influence of leadership behaviors on safety outcomes were largely similar in Sweden and Denmark. Rule-oriented and participative leadership were more common in the Swedish than Danish construction industry, which may partly explain the difference in occupational accident rates. Conclusions Applying less laissez-faire leadership and more transformational, active transactional, participative and rule-oriented leadership appears to be an effective way for construction site managers to improve occupational safety in the industry.

A decade of occupational accidents due to direct or indirect electrical contact in the primary, secondary and tertiary sectors in Spain (2003-2012).

PubMed

Castillo-Rosa, Juan; Suárez-Cebador, Manuel; Rubio-Romero, Juan Carlos; Aguado, Jose Antonio

2017-03-01

Occupational accidents caused by electrical contact are a major concern worldwide due to their severe consequences. The study conducted is based on an analysis of the evolution of incidence rates and dependence between variables for 14,022 electrical accidents occurring in Spain between 2003 and 2012. The results show that electrical accidents as a whole are 3.6 times more likely to have severe consequences than the rest of the accidents in the country. This proportion is even nine times greater in the case of fatal accidents. They also confirm a significant relationship between the severity of this type of accidents and the economic sector in which they occur. On the other hand, there is a positive trend in the reduction of the incidence rate, especially in relation to direct contact, although unexpectedly the rate of accidents due to indirect contact is on the rise. Thus, preventing electrical occupational accidents requires efforts to guarantee adequate training adapted to the needs of workers in the various economic sectors. Furthermore, those responsible for safety should work to implement mechanisms to monitor and control compliance with efficient protective measures against electrical contact.

CAD/CAE-technologies application for assessment of passenger safety on railway transport in emergency

NASA Astrophysics Data System (ADS)

Antipin, D. Ya; Shorokhov, S. G.; Bondarenko, O. I.

2018-03-01

A possibility of using current software products realizing CAD/CAE-technologies for the assessment of passenger safety in emergency cases on railway transport has been analyzed. On the basis of the developed solid computer model of an anthropometric dummy, the authors carried out an analysis of possible levels of passenger injury during accident collision of a train with an obstacle.

Advancement of Tools Supporting Improvement of Work Safety in Selected Industrial Company

NASA Astrophysics Data System (ADS)

Gembalska-Kwiecień, Anna

2018-03-01

In the presented article, the advancement of tools to improve the safety of work in the researched industrial company was taken into consideration. Attention was paid to the skillful analysis of the working environment, which includes the available technologies, work organization and human capital. These factors determine the development of the best prevention activities to minimize the number of accidents.

Effects of human and organizational deficiencies on workers'safety behavior in a mining site in Iran.

PubMed

Mirzaei Aliabadi, Mostafa; Aghaei, Hamed; Kalatpour, Omid; Soltanian, Ali Reza; SeyedTabib, Maryam

2018-05-18

Mines are a dangerous workplace worldwide with a high accident rate. According to the Statistical Center of Iran, the number of occupational accidents in Iranian mines has increased in recent years. This study determined and explained human and organizational deficiencies influencing Iranian mining accidents. In this study, the data associated with 305 mining accidents were investigated. The data were analyzed based on a systems analysis approach to identify critical deficiencies in organizational influences, unsafe supervision, preconditions for unsafe acts, and workers' unsafe acts. Partial Least Square Structural Equation Modeling [PLS-SEM] was utilized for modeling the interactions between these deficiencies. It was demonstrated that organizational deficiencies had a direct positive effect on workers' violations (path coefficient=0.16) and workers' errors (path coefficient=0.23). The effect of unsafe supervision on workers' violations and workers' errors was also significant with the path coefficients of 0.14 and 0.20. Likewise, preconditions for unsafe acts also had a significant effect on both workers' violations (path coefficient=0.16) and workers' errors (path coefficient=0.21). Moreover, organizational deficiencies had an indirect positive effect on workers' unsafe acts mediated by unsafe supervision and preconditions for unsafe acts. Among the variables examined in the current study, organizational influences had the strongest impacts on workers' unsafe acts. Organizational deficiencies are the main causes of accidents in mining sectors that affects all other aspects of system safety. For preventing occupational accidents, organizational deficiencies should be modified first.

Implementation of a novel taxonomy based on cognitive work analysis in the assessment of safety performance.

PubMed

Niskanen, Toivo

2017-12-12

The aim of this study was to examine how the developed taxonomy of cognitive work analysis (CWA) can be applied in combination with statistical analysis regarding different sociotechnical categories. This study applied a combination of quantitative and qualitative methodologies. Workers (n = 120) and managers (n = 85) in the chemical industry were asked in a questionnaire how different occupational safety and health (OSH) measures were being implemented. The exploration of the qualitative CWA taxonomy consisted of an analysis of the following topics: (a) work domain; (b) control task; (c) strategies; (d) social organization and cooperation; (e) worker competencies. The following hypotheses were supported - activities of the management had positive impacts on the aggregated variables: near-accident investigation and instructions (H 1 ); OSH training (H 2 ); operations, technical processes and safe use of chemicals (H 3 ); use of personal protective equipment (H 4 ); measuring, follow-up and prevention of major accidents (H 5 ). The CWA taxonomy was applied in mixed methods when testing H 1 -H 5 . A special approach is to analyze the work demands of complex sociotechnical systems with the taxonomy of CWA. In problem-solving, the CWA taxonomy should seek to capitalize on the strengths and minimize the limitations of safety performance.

Economic evaluation of occupational safety preventive measures in a hospital.

PubMed

Ramos, Delfina G; Arezes, Pedro M; Afonso, Paulo

2015-01-01

When an organization performs an integrated analysis of risks through its Occupational Health and Safety Management System, several steps are suggested to address the implications of the identified risks. Namely, the organization should make a detailed analysis of the monetary impact for the organization of each of the preventive measures considered. However, it is also important to perform an analysis of the impact of each measure on society (externalities). The aim of this paper is to present a case study related to the application of the proposed economic evaluation methodology. An analysis of the work accidents in a hospital has been made. Three of the major types of accidents have been selected: needle stings, falls and excessive strain. Following the risk assessment, some preventive measures have been designed. Subsequently, the Benefit/Cost ratio (B/C) of these measures has been calculated, both in financial terms (from the organization's perspective) and in economic terms (including the benefits for the worker and for the Society). While the financial ratio is only advantageous in some cases, when the externalities are taken into account, the B/C ratio increases significantly. It is important to consider external benefits to make decisions concerning the implementation of preventive measures in Occupational Health and Safety projects.

Working on Sundays–effects on safety, health, and work-life balance.

PubMed

Wirtz, Anna; Nachreiner, Friedhelm; Rolfes, Katharina

2011-05-01

Several attributes of the work schedule can increase the risk of occupational injuries and accidents, health impairments, and reduced social participation. Although previous studies mainly focused on the effects of shiftwork and long working hours on employee health and safety, there is little evidence of a potential negative impact of working Sundays on the incidence of occupational accidents, health impairments, and work-life balance. A representative sample of employed workers in 31 member and associated states of the European Union (n = 23,934) served as the database for a cross-sectional analysis. The sample was collected via face-to-face interviews in the year 2005. The association of the risks of occupational accidents, health impairments, and decreases in work-life balance with working Sundays was calculated using logistic regression models, controlling for potential confounders, such as shiftwork, workload, and demographic characteristics. The results indicated that working one or more Sundays/month was associated with increase both in the risk of reporting one or more health impairments (odds ratio [OR]: 1.17, 95% confidence interval [CI]: 1.06-1.29) and poorer work-life balance (OR: 1.15, 95% CI: 1.02-1.28). These effects remained after controlling for potentially confounding factors, such as other work schedule attributes, intensity of physical and mental workload, and individual characteristics. Furthermore, working Sundays was also related to increased risk of occupational accidents within the last year (OR: 1.34, 95% CI: 1.03-1.73). Controlling again for individual, workload, and working-time characteristics, a significant association with accident risk, however, remained only in work sectors with low a priori risk of occupational accidents (OR: 1.40, 95% CI: 1.02-1.91), although the increased risk could be observed for both medium and high a priori risk sectors working Sundays (without controlling for additional confounders). The results thus indicate that the detrimental effects of working Sundays on safety, health, and social well-being should be taken into account when designing work schedules. The potential hazards to employees' safety, health, and work-life balance, in particular, should be considered in discussions concerning extending work on Sundays in certain sectors, e.g., retail.

Prospective Safety Analysis and the Complex Aviation System

NASA Technical Reports Server (NTRS)

Smith, Brian E.

2013-01-01

Fatal accident rates in commercial passenger aviation are at historic lows yet have plateaued and are not showing evidence of further safety advances. Modern aircraft accidents reflect both historic causal factors and new unexpected "Black Swan" events. The ever-increasing complexity of the aviation system, along with its associated technology and organizational relationships, provides fertile ground for fresh problems. It is important to take a proactive approach to aviation safety by working to identify novel causation mechanisms for future aviation accidents before they happen. Progress has been made in using of historic data to identify the telltale signals preceding aviation accidents and incidents, using the large repositories of discrete and continuous data on aircraft and air traffic control performance and information reported by front-line personnel. Nevertheless, the aviation community is increasingly embracing predictive approaches to aviation safety. The "prospective workshop" early assessment tool described in this paper represents an approach toward this prospective mindset-one that attempts to identify the future vectors of aviation and asks the question: "What haven't we considered in our current safety assessments?" New causation mechanisms threatening aviation safety will arise in the future because new (or revised) systems and procedures will have to be used under future contextual conditions that have not been properly anticipated. Many simulation models exist for demonstrating the safety cases of new operational concepts and technologies. However the results from such models can only be as valid as the accuracy and completeness of assumptions made about the future context in which the new operational concepts and/or technologies will be immersed. Of course that future has not happened yet. What is needed is a reasonably high-confidence description of the future operational context, capturing critical contextual characteristics that modulate both the likelihood of occurrence of hazards, and the likelihood that those hazards will lead to negative safety events. Heuristics extracted from scenarios, questionnaires, and observed trends from scanning the aviation horizon may be helpful in capturing those future changes in a way conducive to safety assessment. What is also needed is a checklist of potential sources of emerging risk that arise from organizational features that are frequently overlooked. The ultimate goal is to develop a pragmatic, workable method for using descriptions of the future aviation context, to generate valid predictions of safety risks.

Occupational health and safety in the Moroccan construction sites: preliminary diagnosis

NASA Astrophysics Data System (ADS)

Tarik, Bakeli; Adil, Hafidi Alaoui

2018-05-01

Managing occupational health and safety on Moroccan construction sector represents the first step for projects' success. In fact, by avoiding accidents, all the related direct and indirect costs and delays can be prevented. That leads to an important question always asked by any project manager: what are the factors responsible for accidents? How can they be avoided? Through this research, the aim is to go through these questions, to contribute in occupational health and safety principles understanding, to identify construction accidentology and risk management opportunities and to approach the case of Moroccan construction sites by an accurate diagnosis. The approach is to make researchers, managers, stakeholders and deciders aware about the criticality of construction sites health and safety situation. And, to do the first step for a scientific research project in relation with health and safety in the Moroccan construction sector. For this, the paper will study the related state of art namely about construction sites accidents causation, and will focus on Reason's `Swiss cheese' model and its utilization for Moroccan construction sites health and safety diagnosis. The research will end with an estimation of an accidents fatality rate in the Moroccan construction sector and a benchmarking with the international rates. Finally, conclusions will be presented about the necessity of Occupational Health and Safety Management System (OHSMS) implementation, which shall cover all risk levels, and insure, at the same time, that the necessary defenses against accidents are on place.

STAMP-Based HRA Considering Causality Within a Sociotechnical System: A Case of Minuteman III Missile Accident.

PubMed

Rong, Hao; Tian, Jin

2015-05-01

The study contributes to human reliability analysis (HRA) by proposing a method that focuses more on human error causality within a sociotechnical system, illustrating its rationality and feasibility by using a case of the Minuteman (MM) III missile accident. Due to the complexity and dynamics within a sociotechnical system, previous analyses of accidents involving human and organizational factors clearly demonstrated that the methods using a sequential accident model are inadequate to analyze human error within a sociotechnical system. System-theoretic accident model and processes (STAMP) was used to develop a universal framework of human error causal analysis. To elaborate the causal relationships and demonstrate the dynamics of human error, system dynamics (SD) modeling was conducted based on the framework. A total of 41 contributing factors, categorized into four types of human error, were identified through the STAMP-based analysis. All factors are related to a broad view of sociotechnical systems, and more comprehensive than the causation presented in the accident investigation report issued officially. Recommendations regarding both technical and managerial improvement for a lower risk of the accident are proposed. The interests of an interdisciplinary approach provide complementary support between system safety and human factors. The integrated method based on STAMP and SD model contributes to HRA effectively. The proposed method will be beneficial to HRA, risk assessment, and control of the MM III operating process, as well as other sociotechnical systems. © 2014, Human Factors and Ergonomics Society.

Safety Evaluation Of Intelligent Transportation Systems, Workshop Proceedings

DOT National Transportation Integrated Search

1995-05-01

IMPROVED SAFETY IS PRESENTED AS AN IMPORTANT POTENTIAL BENEFIT OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS). SYSTEMS ARE EMERGING AND ARE UNDER DEVELOPMENT THAT ARE DESIGNED TO REDUCE THE NUMBER OF ACCIDENTS AND THE SEVERITY OF THOSE ACCIDENTS THAT CA...

Pipeline Transportation Safety : Volume I, NTSB Reports, Studies, and Recommendations, 1970-1979

DOT National Transportation Integrated Search

1980-09-01

This document provides a compendium of all National Transportation Safety Board (NTSB) Pipeline Accident Reports (PAR) and Pipeline. Special Studies (PSS) published from 1970 through 1979. Abstracts, accident causes, and NTSB recommendations are incl...

Directory of aerospace safety specialized information sources, volume 2

NASA Technical Reports Server (NTRS)

Rubinstein, R. I.; Pinto, J. J.; Meschkow, S. Z.

1976-01-01

A handbook of organizations and experts in specific and well-defined areas of safety technology is presented. It is designed for the safety specialist as an aid for locating both information sources and individual points of contact (experts) in engineering related fields. The file covers sources of data in aerospace design, tests, and operations, as well as information on hazard and failure cause identification, accident analysis, and materials characteristics. Other related areas include the handling and transportation of hazardous chemicals, radioactive isotopes, and liquified natural gases.

Effectiveness of assistive technology in improving the safety of people with dementia: a systematic review and meta-analysis.

PubMed

Brims, Lucy; Oliver, Kathryn

2018-04-10

Assistive technology (AT) may enable people with dementia to live safely at home for longer, preventing care home admission. This systematic review assesses the effectiveness of AT in improving the safety of people with dementia living in the domestic setting, by searching for randomised controlled trials, non-randomised controlled trials and controlled before-after studies which compared safety AT with treatment as usual. Measures of safety include care home admission; risky behaviours, accidents and falls at home; and numbers of deaths. The review updates the safety aspect of Fleming and Sum's 2014 systematic review. Seven bibliographic databases, the Social Care Institute for Excellence website and the Alzheimer's Society website were searched for published and unpublished literature between 2011-2016. Search terms related to AT, dementia and older people. Common outcomes were meta-analysed. Three randomised controlled trials were identified, including 245 people with dementia. No significant differences were found between intervention and control groups in care home admission (risk ratio 0.85 95% CI [0.37, 1.97]; Z = 0.37; p = 0.71). The probability of a fall occurring was 50% lower in the intervention group (risk ratio 0.50 95% CI [0.32, 0.78]; Z = 3.03; p = 0.002). One included study found that a home safety package containing AT significantly reduced risky behaviour and accidents (F(45) = 4.504, p < 0.001). Limitations include the few studies found and the inclusion of studies in English only. AT's effectiveness in decreasing care home admission is inconclusive. However, the AT items and packages tested improved safety through reducing falls risk, accidents and other risky behaviour.

49 CFR 225.9 - Telephonic reports of certain accidents/incidents and other events.

Code of Federal Regulations, 2012 CFR

2012-10-01

...-rail grade crossing when death occurs within 24 hours of the accident/incident; (iv) A train accident... of rail accidents for the National Transportation Safety Board (49 CFR part 840) and the Research and...

49 CFR 225.9 - Telephonic reports of certain accidents/incidents and other events.

Code of Federal Regulations, 2014 CFR

2014-10-01

...-rail grade crossing when death occurs within 24 hours of the accident/incident; (iv) A train accident... of rail accidents for the National Transportation Safety Board (49 CFR part 840) and the Research and...

49 CFR 225.9 - Telephonic reports of certain accidents/incidents and other events.

Code of Federal Regulations, 2013 CFR

2013-10-01

...-rail grade crossing when death occurs within 24 hours of the accident/incident; (iv) A train accident... of rail accidents for the National Transportation Safety Board (49 CFR part 840) and the Research and...

49 CFR 225.9 - Telephonic reports of certain accidents/incidents and other events.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-rail grade crossing when death occurs within 24 hours of the accident/incident; (iv) A train accident... of rail accidents for the National Transportation Safety Board (49 CFR part 840) and the Research and...

49 CFR 195.54 - Accident reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Accident reports. 195.54 Section 195.54... PIPELINE Annual, Accident, and Safety-Related Condition Reporting § 195.54 Accident reports. (a) Each operator that experiences an accident that is required to be reported under § 195.50 shall as soon as...

An aftermath analysis of the 2014 coal mine accident in Soma, Turkey: Use of risk performance indicators based on historical experience.

PubMed

Spada, Matteo; Burgherr, Peter

2016-02-01

On the 13th of May 2014 a fire related incident in the Soma coal mine in Turkey caused 301 fatalities and more than 80 injuries. This has been the largest coal mine accident in Turkey, and in the OECD country group, so far. This study investigated if such a disastrous event should be expected, in a statistical sense, based on historical observations. For this purpose, PSI's ENSAD database is used to extract accident data for the period 1970-2014. Four different cases are analyzed, i.e., OECD, OECD w/o Turkey, Turkey and USA. Analysis of temporal trends for annual numbers of accidents and fatalities indicated a non-significant decreasing tendency for OECD and OECD w/o Turkey and a significant one for USA, whereas for Turkey both measures showed an increase over time. The expectation analysis revealed clearly that an event with the consequences of the Soma accident is rather unlikely for OECD, OECD w/o Turkey and USA. In contrast, such a severe accident has a substantially higher expectation for Turkey, i.e. it cannot be considered an extremely rare event, based on historical experience. This indicates a need for improved safety measures and stricter regulations in the Turkish coal mining sector in order to get closer to the rest of OECD. Copyright © 2015 Elsevier Ltd. All rights reserved.

Road accidents caused by sleepy drivers: Update of a Norwegian survey.

PubMed

Phillips, Ross Owen; Sagberg, Fridulv

2013-01-01

The current study tests, updates and expands a model of factors associated with sleepy driving, originally based on a 1997 survey of accident-involved Norwegian drivers (Sagberg, F., 1999. Road accidents caused by drivers falling asleep. Accident Analysis & Prevention 31, 639-649). The aim is to establish a robust model to inform measures to tackle sleepy driving. The original questions on (i) tiredness-related accidents and (ii) incidents of sleep behind the wheel in the last 12 months were again posed in 2003 and 2008, in independent surveys of Norwegian drivers involved in accidents reported to a large insurance company. According to those drivers at-fault for the accident, tiredness or sleepiness behind the wheel contributed to between 1.9 and 3.9 per cent of all types of accident reported to the insurance company across these years. Accident-involved drivers not at fault for the accident reported a reduction in the incidence of sleep behind the wheel for the preceding year, decreasing from 8.3 per cent in 1997 to 2.9 per cent in 2008. The reasons for this are not clear. According to logistic regression analysis of survey responses, the following factors were robustly associated with road accidents involving sleepy driving: driving off the road; good road conditions; longer distance driven since the start of the trip; and fewer years with a driving licence. The following factors are consistently associated with reports of sleep behind the wheel, whether or not it leads to an accident: being male; driving further per year; being younger; and having sleep-related health problems. Taken together these findings suggest that young, inexperienced male drivers who drive long distances may be a suitable target for road safety campaigns aimed at tackling sleepy driving. Copyright © 2012 Elsevier Ltd. All rights reserved.

Workplace accidents and self-organized criticality

NASA Astrophysics Data System (ADS)

Mauro, John C.; Diehl, Brett; Marcellin, Richard F.; Vaughn, Daniel J.

2018-09-01

The occurrence of workplace accidents is described within the context of self-organized criticality, a theory from statistical physics that governs a wide range of phenomena across physics, biology, geosciences, economics, and the social sciences. Workplace accident data from the U.S. Bureau of Labor Statistics reveal a power-law relationship between the number of accidents and their severity as measured by the number of days lost from work. This power-law scaling is indicative of workplace accidents being governed by self-organized criticality, suggesting that nearly all workplace accidents have a common underlying cause, independent of their severity. Such power-law scaling is found for all labor categories documented by the U.S. Bureau of Labor Statistics. Our results provide scientific support for the Heinrich accident triangle, with the practical implication that suppressing the rate of severe accidents requires changing the attitude toward workplace safety in general. By creating a culture that values safety, empowers individuals, and strives to continuously improve, accident rates can be suppressed across the full range of severities.

Road traffic accidents and self-reported Portuguese car driver's attitudes, behaviors, and opinions: Are they related?

PubMed

Bon de Sousa, Teresa; Santos, Carolina; Mateus, Ceu; Areal, Alain; Trigoso, Jose; Nunes, Carla

2016-10-02

This study aims to characterize Portuguese car drivers in terms of demographic characteristics, driving experience, and attitudes, opinions, and behaviors concerning road traffic safety. Furthermore, associations between these characteristics and self-reported involvement in a road traffic accident as a driver in the last 3 years were analyzed. A final goal was to develop a final predictive model of the risk of suffering a road traffic accident. A cross-sectional analytic study was developed, based on a convenience sample of 612 car drivers. A questionnaire was applied by trained interviewers, embracing various topics related to road safety such as driving under the influence of alcohol or drugs, phone use while driving, speeding, use of advanced driver assistance systems, and the transport infrastructure and environment (European Project SARTRE 4, Portuguese version). From the 52 initial questions, 19 variables were selected through principal component analysis. Then, and in addition to the usual descriptive measures, logistic binary regression models were used in order to describe associations and to develop a predictive model of being involved in a road traffic accident. Of the 612 car drivers, 37.3% (228) reported being involved in a road traffic accident with damage or injury in the past 3 years. In this group, the majority were male, older than 65, with no children, not employed, and living in an urban area. In the multivariate model, several factors were identified: being widowed (vs. single; odds ratio [OR] = 3.478, 95% confidence interval [95% CI], 1.159-10.434); living in a suburban area (vs. a rural area; OR = 5.023, 95% CI, 2.260-11.166); having been checked for alcohol once in the last 3 years (vs. not checked; OR = 3.124, 95% CI, 2.040-4,783); and seldom drinking an energetic beverage such as coffee when tired (vs. always do; OR = 6.822, 95% CI, 2.619-17.769) all suffered a higher risk of being involved in a car accident. The results obtained with regard to behavioral factors meet the majority of the risk factors associated with car accidents referred to in the literature. This study highlights the relation of relatively minor accidents (the majority with no injuries) with an urban (or semi-urban) context and involving older drivers. These accidents are not usually the focus of road safety literature (mainly death and serious health loss) but, in addition to the economic costs involved, they can have a huge impact on road safety (e.g., pedestrian). Specifically, the following interventions can be proposed: more detailed clinical examinations to identify real competencies to drive especially in older drivers (active aging can constitute a new challenge in road safety and new paradigms can arise) and education campaigns on how to cope with fatigue. Future studies in large samples and not based on self-reported behaviors should be developed.

Global trend according to estimated number of occupational accidents and fatal work-related diseases at region and country level.

PubMed

Hämäläinen, Päivi; Leena Saarela, Kaija; Takala, Jukka

2009-01-01

Although occupational accidents and work-related diseases have been of interest for a long time, due to lack of proper recording and notification systems the official numbers of occupational accidents and work-related diseases are missing for many countries. Presently, the demand for effectiveness and an interest in the economic aspects of accidents have increased prevention activities at company and country levels. Occupational accident data of selected countries and of World Health Organization regional divisions together with the global burden of disease were used in estimating global occupational accidents and fatal work-related diseases. The trend of global occupational accidents and work-related diseases is presented at region and country levels. The years 1998, 2001, and 2003 are compared in the case of occupational accidents and the years 2000 and 2002 in the case of work-related diseases. The total number of occupational accidents and fatal work-related diseases has increased, but the fatality rates per 100,000 workers have decreased. There were almost 360,000 fatal occupational accidents in 2003 and almost 2 million fatal work-related diseases in 2002. Every day more than 960,000 workers get hurt because of accidents. Each day 5,330 people die because of work-related diseases. Information on occupational accidents and work-related diseases is needed so that countries may understand better the importance of occupational health and safety at country and company level. Especially companies in developing countries are not familiar with occupational safety and health. Statistical data is essential for accident prevention; it is a starting point for the safety work.

Shift and night work and long working hours--a systematic review of safety implications.

PubMed

Wagstaff, Anthony Sverre; Sigstad Lie, Jenny-Anne

2011-05-01

In order to devise effective preventive strategies, it is important to study workplace stressors that might increase the risk of workplace accidents - both affecting workers themselves as well as causing harm to third-parties. The aim of this report is to provide a systematic, updated overview and scientific review of empirical research regarding accidents in relation to long work hours and shift work, primarily based on epidemiological studies. The search for articles was part of a large review study on the effects of work hours on various health outcomes, safety, and performance. The search strategy included 5 international scientific databases, and nearly 7000 articles were initially identified using our search string. Following the application of inclusion and exclusion criteria, 443 publications were found and evaluated using a pre-defined scoring system. Of these, 43 concerned safety and accidents but only 14 were considered to be of high quality (total score 2 or 3 on a scale from 0-3) and therefore used for this study. Both shift work and long working hours present a substantial and well-documented detrimental effect on safety - all the studies that are included in this review have one or more significant findings in this respect. The trends are quite coherent although the increases in accident rates are mostly from 50% to 100%. In epidemiological terms, this may be seen as rather small differences. The use of such data is therefore only of importance if the accident incidence is high or if accidents may have large effects. The findings are most relevant to safety-critical activities such as the transport and health sectors. Work periods >8 hours carry an increased risk of accidents that cumulates, so that the increased risk of accidents at around 12 hours is twice the risk at 8 hours. Shift work including nights carries a substantial increased risk of accidents, whereas "pure" night work may bring some protection against this effect due to resynchronization. The evaluated studies give no clear indications of any age or gender being specifically susceptible or protected against the effects of work times scheduling on accident risk.

Prediction Of The Expected Safety Performance Of Rural Two-Lane Highways

DOT National Transportation Integrated Search

2000-12-01

This report presents an algorithm for predicting the safety performance of a rural two-lane highway. The accident prediction algorithm consists of base models and accident modification factors for both roadway segments and at-grade intersections on r...

Deployment of a tool for measuring freeway safety performance.

DOT National Transportation Integrated Search

2011-12-01

This project updated and deployed a freeway safety performance measurement tool, building upon a previous project that developed the core methodology. The tool evaluates the cumulative risk over time of an accident or a particular kind of accident. T...

Motor vehicle safety : NHTSA's ability to detect and recall defective replacement crash parts is limited

DOT National Transportation Integrated Search

2001-01-01

The National Highway Traffic Safety Administration (NHTSA), the federal agency responsible for reducing accidents, deaths, and injuries resulting from motor vehicle crashes on the nation's highways, estimates that over 6 million automobile accidents ...

Environmental health, public safety, and social impacts associated with transportation accidents involving hazardous substances

DOT National Transportation Integrated Search

2000-12-31

Accidents involving chemicals or radioactive materials represent a significant threat to the environment, public : health and safety, and community well-being. In an increasingly complex and interconnected world, no community : is immune from the thr...

Auto Accidents: Reducing Frequency, Increasing Recovery.

ERIC Educational Resources Information Center

Comeaux, Linda Atkins

1988-01-01

Careful hiring, monitoring, training, discipline, and safety policies will reduce school automobile and bus accidents. Guidelines are offered for accident reporting, claim handling, and dealing with insurance adjusters. (MLF)

Implementation of Programmatic Quality and the Impact on Safety

NASA Astrophysics Data System (ADS)

Huls, Dale T.; Meehan, Kevin M.

2005-12-01

The implementation of an inadequate programmatic quality assurance discipline has the potential to adversely affect safety and mission success. This is best demonstrated in the lessons provided by the Apollo 1 Apollo 13 Challenger, and Columbia accidents; NASA Safety and Mission Assurance (S&MA) benchmarking exchanges; and conclusions reached by the Shuttle Return-to-Flight Task Group established following the Columbia Shuttle accident. Examples from the ISS Program demonstrate continuing issues with programmatic quality. Failure to adequately address programmatic quality assurance issues has a real potential to lead to continued inefficiency, increases in program costs, and additional catastrophic accidents.

Exploring inattention and distraction in the SafetyNet Accident Causation Database.

PubMed

Talbot, Rachel; Fagerlind, Helen; Morris, Andrew

2013-11-01

Distraction and inattention are considered to be very important and prevalent factors in the causation of road accidents. There have been many recent research studies which have attempted to understand the circumstances under which a driver becomes distracted or inattentive and how distraction/inattention can be prevented. Both factors are thought to have become more important in recent times partly due to the evolution of in-vehicle information and communication technology. This study describes a methodology that was developed to understand when factors such as distraction and inattention may have been contributors to crashes and also describes some of the consequences of distraction and inattention in terms of subsequent driver actions. The study uses data relating to distraction and inattention from the SafetyNet Accident Causation Database. This database was formulated as part of the SafetyNet project to address the lack of representative in-depth accident causation data within the European Union. Data were collected in 6 European countries using 'on-scene' and 'nearly on-scene' crash investigation methodologies. 32% of crashes recorded in the database, involved at least one driver, rider or pedestrian, who was determined to be 'Inattentive' or 'Distracted'. 212 of the drivers were assigned 'Distraction' and 140 drivers were given the code 'Inattention'. It was found that both distraction and inattention often lead to missed observations within the driving task and consequently 'Timing' or 'Direction' become critical events in the aetiology of crashes. In addition, the crash types and outcomes may differ according to the type and nature of the distraction and inattention as determined by the in-depth investigations. The development of accident coding methodology is described in this study as is its evolution into the Driver Reliability and Error Analysis Model (DREAM) version 3.0. Copyright © 2012 Elsevier Ltd. All rights reserved.

How indicative is a self-reported driving behaviour profile of police registered traffic law offences?

PubMed

Martinussen, L M; Møller, M; Prato, C G; Haustein, S

2017-02-01

Although most motorised countries have experienced massive improvements in road safety over the last decades, human behaviour and differences in accident risk across sub-groups of drivers remains a key issue in the area of road safety. The identification of risk groups requires the identification of reliable predictors of safe or unsafe driving behaviour. Given this background, the aim of this study was to test whether driver sub-groups identified based on self-reported driving behaviour and skill differed in registered traffic law offences and accidents, and whether group membership was predictive of having traffic law offences. Sub-groups of drivers were identified based on the Driver Behaviour Questionnaire (DBQ) and the Driver Skill Inventory (DSI), while traffic offences and accidents were register-based (Statistics Denmark). The participants (N=3683) were aged 18-84 years and randomly selected from the Danish Driving License Register. Results show that the driver sub-groups differed significantly in registered traffic offences but not in registered accidents. In a logistic regression analysis, the sub-group "Violating unsafe drivers" was found predictive of having a traffic offence, even when socio-demographic variables and exposure were controlled for. The most important predictive factor, however, was having a criminal record for non-traffic offences, while gender, living without a partner, and being self-employed also had a significant effect. The study confirms the use of the DBQ and DSI as suitable instruments for predicting traffic offences while also confirming previous results on accumulation of problematic behaviours across life contexts. The finding that driver sub-groups did not differ in registered accidents supports the recent research activities in finding and modelling surrogate safety measures. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nuclear power and probabilistic safety assessment (PSA): past through future applications

NASA Astrophysics Data System (ADS)

Stamatelatos, M. G.; Moieni, P.; Everline, C. J.

1995-03-01

Nuclear power reactor safety in the United States is about to enter a new era -- an era of risk- based management and risk-based regulation. First, there was the age of `prescribed safety assessment,' during which a series of design-basis accidents in eight categories of severity, or classes, were postulated and analyzed. Toward the end of that era, it was recognized that `Class 9,' or `beyond design basis,' accidents would need special attention because of the potentially severe health and financial consequences of these accidents. The accident at Three Mile Island showed that sequences of low-consequence, high-frequency events and human errors can be much more risk dominant than the Class 9 accidents. A different form of safety assessment, PSA, emerged and began to gain ground against the deterministic safety establishment. Eventually, this led to the current regulatory requirements for individual plant examinations (IPEs). The IPEs can serve as a basis for risk-based regulation and management, a concept that may ultimately transform the U.S. regulatory process from its traditional deterministic foundations to a process predicated upon PSA. Beyond the possibility of a regulatory environment predicated upon PSA lies the possibility of using PSA as the foundation for managing daily nuclear power plant operations.

Study of Evaluation OSH Management System Policy Based On Safety Culture Dimensions in Construction Project

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Armyn Machfudiyanto, Rossy; Arifuddin, Rosmariani; Mahendra Fira Setiawan, R.; Yogiswara, Yoko

2017-07-01

Safety Culture in the construction industry is very influential on the socio economic conditions that resulted in the country’s competitiveness. Based on the data, the accident rate of construction projects in Indonesia is very high. In the era of the Asian Economic Community (AEC) Indonesian contractor is required to improve competitiveness, one of which is the implementation of the project without zero accident. Research using primary and secondary data validated the results of the literature experts and questionnaire respondents were analyzed using methods SmartPLS, obtained pattern of relationships between dimensions of safety culture to improve the performance of Safety. The results showed that the behaviors and Cost of Safety into dimensions that significantly affect the performance of safety. an increase in visible policy-based on Regulation of Public Work and Housing No 5/PRT/M/2014 to improve to lower the accident rate.

Cargo tank incident study (CTIS) : rollover data and risk framework.

DOT National Transportation Integrated Search

2017-03-01

It is critical to our nations safety to minimize the risk of accidents involving the transportation of hazardous materials on our nations roadways via commercial cargo tank trucks. This research included a detailed human factors analysis of car...

Measuring the effects of aborted takeoffs and landings on traffic flow at JFK

DOT National Transportation Integrated Search

2012-10-14

The FAA Office of Accident Investigation and Prevention (AVP) supports research, analysis and demonstration of quantitative air traffic analyses to estimate safety performance and benefits of the Next Generation Air Transportation System (NextGen). T...

Summary Report: Uniform Traffic Control And Warning Messages For Portable Changeable Message Signs

DOT National Transportation Integrated Search

2000-03-01

The California database incorporated in the Highway Safety Information System (HSIS) is derived from the California TASAS (Traffic Accident Surveillance and Analysis System). The system, maintained by the Traffic Operations Office of Caltrans, is a m...

An analysis of civil aviation propeller-to-person accidents : 1965-1979.

DOT National Transportation Integrated Search

1981-05-01

The interest of manufacturing, governmental, and safety personnel using paint schemes on propeller and rotor blades is based on improving the visual conspicuity of those blades when they are rotating. While propeller and rotor paint schemes may serve...

Strategic Accident Reduction in an Energy Company and Its Resulting Financial Benefits.

PubMed

Reiman, Arto; Räisänen, Tuomo; Väyrynen, Seppo; Autio, Tommi

2018-04-10

This study provides a case example of an energy company that prioritised occupational safety and health and accident reduction as long-term, strategic development targets. Furthermore, this study describes the monetary benefits of this strategic decision. Company-specific accident indicators and monetary costs and benefits are evaluated. During the observation period (2010-2016), strategic investments in occupational safety and health cost the company EUR 0.8 million. However, EUR 1.8 million were saved in the same period, resulting in a 2.20 cost-benefit ratio. The trend in cost savings is strongly positive. Annual accident costs were EUR 0.4 million lower in 2016 compared to costs in 2010. This study demonstrates that long-term, strategic commitment to occupational safety and health provides monetary value.

Does facing traffic improve pedestrian safety?

PubMed

Luoma, Juha; Peltola, Harri

2013-01-01

This study was designed to evaluate the potential safety importance of the walking direction along a road by examining pedestrian accidents as a function of exposure to risk. The study was limited to rural two-lane roads with no pavement or pedestrian lane. The accident data included police-reported road accidents from Finland between 2006 and 2010 in which a motorized vehicle had struck a pedestrian walking along the road. There were 18 accidents involving a fatally injured pedestrian and 87 accidents involving a non-fatally injured pedestrian. The exposure data collected from the roughly 3400km included 258 pedestrians. The main finding was that the mean effect of facing traffic compared to walking with traffic was a 77% decrease in fatal and in non-fatal injury pedestrian accidents. The results further showed that the effects were greater for main roads than for secondary roads. The main implication of this study is that information about the importance of facing traffic should be reinforced with specific information about its substantial safety benefits. Copyright © 2012 Elsevier Ltd. All rights reserved.

Training Presentation for NASA Civil Helicopter Safety Website

NASA Technical Reports Server (NTRS)

Iseler, Laura

2002-01-01

NASA civil helicopter safety News & Updates include the following: Mar. 2002. The Air Medical Operations Survey has been completed! Check it out! Also accessible via the Mission pages under Air Medical Mission. Air Medical and Law Enforcement Mission pages have been added. They are accessible via the Mission pages. The Public Use, Personal, Offshore, Law Enforcement, External Load, Business and Gyro accident pages (accessable via the Mission page) have been updated. Feb. 2002. A Words of Wisdom section has been added. You can access it by clicking the Library button. A link to a Corporate Accident Response Plan has been added to the Accident page. The AMs, Aerial Application and Instruction accident pages (accessable via the Mission page) have been updated. Jan. 2002. A new searchable safety article database has been added. You can access it by clicking the Library button. The 2001 accident summaries have been updated and the statistics have been compiled - check it out by clicking the accident tab to the left. Dec. 2001. Please read the FAA Administrator's memo regarding the latest FBI warning. 3ee the FAA column - Fall 2001 Read it now!

Building Safer Secondary Schools in Uganda through Collective Commitment to Health and Safety Compliance

ERIC Educational Resources Information Center

Sekiwu, Denis; Kabanda, Milly

2014-01-01

The area of safety and accident prevention is of great concern to managers, because of the increasing number of deaths and accidents at work places. Using a case of Wakiso district, the study sought to investigate the relationship between collective commitment and management of health and safety in Ugandan secondary schools. The study employed a…

Bayesian networks for maritime traffic accident prevention: benefits and challenges.

PubMed

Hänninen, Maria

2014-12-01

Bayesian networks are quantitative modeling tools whose applications to the maritime traffic safety context are becoming more popular. This paper discusses the utilization of Bayesian networks in maritime safety modeling. Based on literature and the author's own experiences, the paper studies what Bayesian networks can offer to maritime accident prevention and safety modeling and discusses a few challenges in their application to this context. It is argued that the capability of representing rather complex, not necessarily causal but uncertain relationships makes Bayesian networks an attractive modeling tool for the maritime safety and accidents. Furthermore, as the maritime accident and safety data is still rather scarce and has some quality problems, the possibility to combine data with expert knowledge and the easy way of updating the model after acquiring more evidence further enhance their feasibility. However, eliciting the probabilities from the maritime experts might be challenging and the model validation can be tricky. It is concluded that with the utilization of several data sources, Bayesian updating, dynamic modeling, and hidden nodes for latent variables, Bayesian networks are rather well-suited tools for the maritime safety management and decision-making. Copyright © 2014 Elsevier Ltd. All rights reserved.